Introducing active learning pedagogy into a technical and vocational education and training academy in Kurdistan, Iraq

NASA Astrophysics Data System (ADS)

Dickson, Martina; Ladefoged, Svend Erik

2017-10-01

This article focuses on a teaching methodology project which investigated issues of teaching quality at a technical and vocational education and training (TVET) academy in Kurdistan, Northern Iraq. The academy was established in 2012 to provide unemployed youth with TVET, particularly workplace-relevant training. A needs analysis showed that the academy's teachers were mainly skilled in technical content areas rather than in pedagogy. Perhaps as a result, predominantly teacher-centred approaches to teaching were observed. However, teaching and learning in TVET, by its very definition, must consider active learning and practical training as core to its vocational purpose. Moreover, technical and pedagogical skills are intrinsically linked, since a teacher cannot effectively pass on technical skills without the necessary pedagogical skills to do so. It is on this premise that the authors of this article based their project, which was designed for the purpose of upgrading the teachers' pedagogical skills to incorporate more active learning strategies and practical work. Comparison of observation logs and feedback sessions at the conclusion of their project provided evidence that whilst some of the teachers' pedagogical skills had shifted towards using more dynamic teaching strategies, interviews strongly indicated that there was also some reluctance to incorporate active learning. In their conclusion, the authors suggest that the insights gained from this project could be further empirically examined in a larger, multi-institutional study.

78 FR 42821 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Affairs Acquisition Regulation (VAAR) Provision 852.211-72 (formerly 852.211-75), Technical Industry.... Abstract: VAAR provision 852.211-72, Technical Industry Standards, requires items offered for sale to VA...

NATIONAL RESPONSE TEAM TECHNICAL ASSISTANCE ...

EPA Pesticide Factsheets

This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public. This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public.

Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

48 CFR 1631.205-76 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Trade, business, technical....205-76 Trade, business, technical, and professional activity costs. (a) FEHBP participating plans, carriers, and underwriters shall seek the advance written approval of the contracting officer for...

NASA Space Environments Technical Discipline Team Space Weather Activities

NASA Astrophysics Data System (ADS)

Minow, J. I.; Nicholas, A. C.; Parker, L. N.; Xapsos, M.; Walker, P. W.; Stauffer, C.

2017-12-01

The Space Environment Technical Discipline Team (TDT) is a technical organization led by NASA's Technical Fellow for Space Environments that supports NASA's Office of the Chief Engineer through the NASA Engineering and Safety Center. The Space Environments TDT conducts independent technical assessments related to the space environment and space weather impacts on spacecraft for NASA programs and provides technical expertise to NASA management and programs where required. This presentation will highlight the status of applied space weather activities within the Space Environment TDT that support development of operational space weather applications and a better understanding of the impacts of space weather on space systems. We will first discuss a tool that has been developed for evaluating space weather launch constraints that are used to protect launch vehicles from hazardous space weather. We then describe an effort to better characterize three-dimensional radiation transport for CubeSat spacecraft and processing of micro-dosimeter data from the International Space Station which the team plans to make available to the space science community. Finally, we will conclude with a quick description of an effort to maintain access to the real-time solar wind data provided by the Advanced Composition Explorer satellite at the Sun-Earth L1 point.

48 CFR 2131.205-43 - Trade, business, technical and professional activity costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Trade, business, technical... Organizations 2131.205-43 Trade, business, technical and professional activity costs. (a) FEGLI Program contractors shall seek the advance written approval of the contracting officer for allowability of all or part...

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

PubMed Central

Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-01-01

Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily

Analysis of "The Wonderful Desert." Technical Report No. 170.

ERIC Educational Resources Information Center

Green, G. M.; And Others

This report presents a text analysis of "The Wonderful Desert," a brief selection from the "Reader's Digest Skill Builder" series. (The techniques used in arriving at the analysis are presented in a Reading Center Technical Report, Number 168, "Problems and Techniques of Text Analysis.") Tables are given for a…

Modeling technical change in climate analysis: evidence from agricultural crop damages.

PubMed

Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

2017-05-01

This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

Properties of some statistics for AR-ARCH model with application to technical analysis

NASA Astrophysics Data System (ADS)

Huang, Xudong; Liu, Wei

2009-03-01

In this paper, we investigate some popular technical analysis indexes for AR-ARCH model as real stock market. Under the given conditions, we show that the corresponding statistics are asymptotically stationary and the law of large numbers hold for frequencies of the stock prices falling out normal scope of these technical analysis indexes under AR-ARCH, and give the rate of convergence in the case of nonstationary initial values, which give a mathematical rationale for these methods of technical analysis in supervising the security trends.

Environmental Measurements Laboratory fiscal year 1998: Accomplishments and technical activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, M.D.

1999-01-01

The Environmental Measurements Laboratory (EML) is government-owned, government-operated, and programmatically under the DOE Office of Environmental Management. The Laboratory is administered by the Chicago Operations Office. EML provides program management, technical assistance and data quality assurance for measurements of radiation and radioactivity relating to environmental restoration, global nuclear nonproliferation, and other priority issues for the Department of Energy, as well as for other government, national, and international organizations. This report presents the technical activities and accomplishments of EML for Fiscal Year 1998.

34 CFR 300.119 - Technical assistance and training activities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION OF CHILDREN WITH DISABILITIES State Eligibility Least Restrictive Environment (lre) § 300.119... 34 Education 2 2011-07-01 2010-07-01 true Technical assistance and training activities. 300.119 Section 300.119 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...

Wyoming Career and Technical Education Policy Analysis

ERIC Educational Resources Information Center

MPR Associates, Inc., 2009

2009-01-01

This policy analysis was produced for the Wyoming Department of Administration and Information by MPR Associates, Inc. Its purpose was to examine federal and state policy related to career and technical education (CTE) to determine whether existing policy (in the form of statutes, rules, regulations, and guidance) could either promote or impede…

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

77 FR 47501 - Applications for New Awards; Technical Assistance on State Data Collection, Analysis, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

... Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood Longitudinal Data Systems; Notice #0;#0;Federal Register / Vol. 77 , No... for New Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2013-01-01 2013-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2012-01-01 2012-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2014-01-01 2014-01-01 false Contents of applications; technical information in final...

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis...) Information sufficient to demonstrate compliance with the applicable requirements regarding testing, analysis... 10 Energy 2 2011-01-01 2011-01-01 false Contents of applications; technical information in final...

Technical Communications in Aeronautics: Results of an Exploratory Study. An Analysis of Managers' and Nonmanagers' Responses. NASA Technical Memorandum 101625.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five secondary assumptions were established for the analysis: (1) that the…

Taking care of you and care for others: an analysis of the activity of the work of technical and nursing assistants of a psychiatric institution for children and adolescents.

PubMed

Mendes, Davidson Passos; Moraes, Geraldo Fabiano de Souza; Mendes, Juliana Cristina de Lima

2012-01-01

Our objective in this study, the analysis of potential fields of risk management in nursing work in psychiatric care to adolescents and children, while settings that go from the relationship between technical and organizational determinants of work activity and the skills of operators. It was established focus on the work process of the Technical and Nursing Assistants to seek for response elements in an attempt to understand the health-disease process experienced by these workers. It was used for analysis and data collection, through the method of Ergonomic Work Analysis (EWA), fifteen workers of nursing staff - T&NA, between effectives and contractors, and the strategies of action and regulation of these workers in relation to the interface that they deal with. The results show that the workers are exposed to all charges in an intense and specific way, causing physical and mental wear, as it approaches the psychological distress, exposure to the psychic pressure, not only through contact with the object of work, but the complexity of these relationships that are involved in nursing staff.

CHAPTER 10: CURRENT TECHNICAL PROBLEMS IN EMERGY ANALYSIS

EPA Science Inventory

Technical problems related to the determination of the emergy base for self-organization in environmental systems are considered in this paper. The comparability of emergy analysis results depends on emergy analysts making similar choices in determining the emergy base for a part...

Benefit-Cost Analysis of Integrated Paratransit Systems : Volume 6. Technical Appendices.

DOT National Transportation Integrated Search

1979-09-01

This last volume, includes five technical appendices which document the methodologies used in the benefit-cost analysis. They are the following: Scenario analysis methodology; Impact estimation; Example of impact estimation; Sensitivity analysis; Agg...

Improving of technical characteristics of launch vehicles with liquid rocket engines using active onboard de-orbiting systems

NASA Astrophysics Data System (ADS)

Trushlyakov, V.; Shatrov, Ya.

2017-09-01

In this paper, the analysis of technical requirements (TR) for the development of modern space launch vehicles (LV) with main liquid rocket engines (LRE) is fulfilled in relation to the anthropogenic impact decreasing. Factual technical characteristics on the example of a promising type of rocket ;Soyuz-2.1.v.; are analyzed. Meeting the TR in relation to anthropogenic impact decrease based on the conventional design approach and the content of the onboard system does not prove to be efficient and leads to depreciation of the initial technical characteristics obtained at the first design stage if these requirements are not included. In this concern, it is shown that the implementation of additional active onboard de-orbiting system (AODS) of worked-off stages (WS) into the onboard LV stages systems allows to meet the TR related to the LV environmental characteristics, including fire-explosion safety. In some cases, the orbital payload mass increases.

Engineering analysis activities in support of susquehanna unit 1 startup testing and cycle 1 operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, G.D.; Kukielka, C.A.; Olson, L.M.

The engineering analysis group is responsible for all nuclear plant systems analysis and reactor analysis activities, excluding fuel management analysis, at Pennsylvania Power and Light Company. These activities include making pretest and posttest predictions of startup tests; analyzing unplanned or unexpected transient events; providing technical training to plant personnel; assisting in the development of emergency drill scenarios; providing engineering evaluations to support design and technical specification changes, and evaluating, assessing, and resolving a number of license conditions. Many of these activities have required the direct use of RETRAN models. Two RETRAN analyses that were completed to support plant operations -more » a pretest analysis of the turbine trip startup test, and a posttest analysis of the loss of startup transformer event - are investigated. For each case, RETRAN results are compared with available plant data and comparisons are drawn on the acceptability of the performance of the plant systems.« less

Refurbishment of Railroad Crossties : A Technical and Economic Analysis

DOT National Transportation Integrated Search

1977-12-01

An analysis of the principal modes of failure for wooden railroad crossties was conducted and an evaluation of the technical and economic feasibility of refurbishing these ties was conducted. Among the principal modes of structural deterioration, onl...

Association of Physical and Technical Activities With Partial Match Status in a Soccer Professional Team.

PubMed

Moalla, Wassim; Fessi, Mohamed Saieffedin; Makni, Emna; Dellal, Alexandre; Filetti, Cristoforo; Di Salvo, Valter; Chamari, Karim

2018-06-01

Moalla, W, Fessi, MS, Makni, E, Dellal, A, Filetti, C, Di Salvo, V, and Chamari, K. Association of physical and technical activities with partial match status in a soccer professional team. J Strength Cond Res 32(6): 1708-1714, 2018-The purpose of this study was to examine the association between physical and technical activities and partial match status (winning, drawing, or losing) in a professional soccer team over 2 seasons. Physical and technical activities of 52 official matches were collected and analyzed at each 15-minute interval, for each half (45 minutes), and full match (90 minutes) using a multiple-camera computerized tracking system. The results indicated that according to full match outcome: winning status was characterized by players covering more total distance (p ≤ 0.05) and low-intensity running (<14.4 km·h) (p ≤ 0.05), whereas, losing status induced more sprinting (≥25.2 km·h) (p < 0.01) and high-intensity running (≥19.8 km·h) (p ≤ 0.05). However, according to partial match status (i.e., 15 minutes and half time), players covered more distance for all running intensities while winning (p < 0.01). Technical match performance scores were not influenced by match status. In conclusion, the present study showed that the physical activities including high-intensity running and total distance covered were related to the match status, whereas technical activities were not. The overall outcome shows that higher physical activity was associated with winning partial match periods. This approach highlights the importance of physical fitness in soccer and may help coaches to better modulate players' roles and team tactical organization throughout the match.

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

NASA Technical Reports Server (NTRS)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

The Consolidated Human Activity Database — Master Version (CHAD-Master) Technical Memorandum

EPA Pesticide Factsheets

This technical memorandum contains information about the Consolidated Human Activity Database -- Master version, including CHAD contents, inventory of variables: Questionnaire files and Event files, CHAD codes, and references.

Content Analysis as a Best Practice in Technical Communication Research

ERIC Educational Resources Information Center

Thayer, Alexander; Evans, Mary; McBride, Alicia; Queen, Matt; Spyridakis, Jan

2007-01-01

Content analysis is a powerful empirical method for analyzing text, a method that technical communicators can use on the job and in their research. Content analysis can expose hidden connections among concepts, reveal relationships among ideas that initially seem unconnected, and inform the decision-making processes associated with many technical…

Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

NASA Technical Reports Server (NTRS)

Hammond, Dana P.

1991-01-01

The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

Identifying knowledge activism in worker health and safety representation: A cluster analysis.

PubMed

Hall, Alan; Oudyk, John; King, Andrew; Naqvi, Syed; Lewchuk, Wayne

2016-01-01

Although worker representation in OHS has been widely recognized as contributing to health and safety improvements at work, few studies have examined the role that worker representatives play in this process. Using a large quantitative sample, this paper seeks to confirm findings from an earlier exploratory qualitative study that worker representatives can be differentiated by the knowledge intensive tactics and strategies that they use to achieve changes in their workplace. Just under 900 worker health and safety representatives in Ontario completed surveys which asked them to report on the amount of time they devoted to different types of representation activities (i.e., technical activities such as inspections and report writing vs. political activities such as mobilizing workers to build support), the kinds of conditions or hazards they tried to address through their representation (e.g., housekeeping vs. modifications in ventilation systems), and their reported success in making positive improvements. A cluster analysis was used to determine whether the worker representatives could be distinguished in terms of the relative time devoted to different activities and the clusters were then compared with reference to types of intervention efforts and outcomes. The cluster analysis identified three distinct groupings of representatives with significant differences in reported types of interventions and in their level of reported impact. Two of the clusters were consistent with the findings in the exploratory study, identified as knowledge activism for greater emphasis on knowledge based political activity and technical-legal representation for greater emphasis on formalized technical oriented procedures and legal regulations. Knowledge activists were more likely to take on challenging interventions and they reported more impact across the full range of interventions. This paper provides further support for the concepts of knowledge activism and technical

Technical- and environmental-efficiency analysis of irrigated cotton-cropping systems in Punjab, Pakistan using data envelopment analysis.

PubMed

Ullah, Asmat; Perret, Sylvain R

2014-08-01

Cotton cropping in Pakistan uses substantial quantities of resources and adversely affects the environment with pollutants from the inputs, particularly pesticides. A question remains regarding to what extent the reduction of such environmental impact is possible without compromising the farmers' income. This paper investigates the environmental, technical, and economic performances of selected irrigated cotton-cropping systems in Punjab to quantify the sustainability of cotton farming and reveal options for improvement. Using mostly primary data, our study quantifies the technical, cost, and environmental efficiencies of different farm sizes. A set of indicators has been computed to reflect these three domains of efficiency using the data envelopment analysis technique. The results indicate that farmers are broadly environmentally inefficient; which primarily results from poor technical inefficiency. Based on an improved input mix, the average potential environmental impact reduction for small, medium, and large farms is 9, 13, and 11 %, respectively, without compromising the economic return. Moreover, the differences in technical, cost, and environmental efficiencies between small and medium and small and large farm sizes were statistically significant. The second-stage regression analysis identifies that the entire farm size significantly affects the efficiencies, whereas exposure to extension and training has positive effects, and the sowing methods significantly affect the technical and environmental efficiencies. Paradoxically, the formal education level is determined to affect the efficiencies negatively. This paper discusses policy interventions that can improve the technical efficiency to ultimately increase the environmental efficiency and reduce the farmers' operating costs.

Evaluating Technical Efficiency of Nursing Care Using Data Envelopment Analysis and Multilevel Modeling.

PubMed

Min, Ari; Park, Chang Gi; Scott, Linda D

2016-05-23

Data envelopment analysis (DEA) is an advantageous non-parametric technique for evaluating relative efficiency of performance. This article describes use of DEA to estimate technical efficiency of nursing care and demonstrates the benefits of using multilevel modeling to identify characteristics of efficient facilities in the second stage of analysis. Data were drawn from LTCFocUS.org, a secondary database including nursing home data from the Online Survey Certification and Reporting System and Minimum Data Set. In this example, 2,267 non-hospital-based nursing homes were evaluated. Use of DEA with nurse staffing levels as inputs and quality of care as outputs allowed estimation of the relative technical efficiency of nursing care in these facilities. In the second stage, multilevel modeling was applied to identify organizational factors contributing to technical efficiency. Use of multilevel modeling avoided biased estimation of findings for nested data and provided comprehensive information on differences in technical efficiency among counties and states. © The Author(s) 2016.

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Advanced Transportation System Studies Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development Contract. Volume 2; Technical Results

NASA Technical Reports Server (NTRS)

1995-01-01

The purpose of the Advanced Transportation System Studies (ATSS) Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is Volume 2 of the final report for the contract. It provides documentation of selected technical results from various TA-2 analysis activities, including a detailed narrative description of the SSTO concept assessment results, a user's guide for the associated SSTO sizing tools, an SSTO turnaround assessment report, an executive summary of the ground operations assessments performed during the first year of the contract, a configuration-independent vehicle health management system requirements report, a copy of all major TA-2 contract presentations, a copy of the FLO launch vehicle final report, and references to Pratt & Whitney's TA-2 sponsored final reports regarding the identification of Russian main propulsion technologies.

Active Rack Isolation System Program and Technical Status

NASA Technical Reports Server (NTRS)

Bushnell, Glenn; Fialho, Ian; Allen, James; Quraishi, Naveed

2000-01-01

The Boeing Active Rack Isolation System (ARIS) is one of the means used to isolate acceleration-sensitive scientific experiments from structurally transmitted disturbances aboard the International Space Station. The presentation provides an overview of ARIS and technical issues associated with the development of the active control system. An overview of ARIS analytical models is presented along with recent isolation performance predictions made using these models. Issues associated with commanding and capturing ARIS data are discussed and possible future options based on the ARIS ISS Characterization Experiment (ICE) Payload On-orbit Processor (POP) are outlined. An overview of the ARIS-ICE experiment scheduled to fly on ISS Flight 6A is presented. The presentation concludes with a discussion of recent- developmental work that includes passive rack damping, umbilical redesigns and advanced multivariable control design methods.

76 FR 7870 - Agency Information Collection Activities: Cybersecurity and Communications Technical Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2010-0006] Agency Information Collection Activities: Cybersecurity and Communications Technical Assistance Request and Evaluation AGENCY: National... Programs Directorate (NPPD), Office of Cybersecurity and Communications (CS&C), Office of Emergency...

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

Analysis of Technical Specifications of the Egyptian and French Electronic Storybooks (e-Storybook)

ERIC Educational Resources Information Center

Atta, Mohammed Mahmoud; Abd El Wahab, Shaimaa Mahmoud

2015-01-01

This research aims at analysing technical specifications in a sample of Egyptian and French electronic storybooks (e-storybooks), to identify similarities and differences in technical specifications of children's e-storybooks and create a verified analysis list to be used for evaluation of e-storybooks. For this purpose, 32 e-storybooks in CD…

RepExplore: addressing technical replicate variance in proteomics and metabolomics data analysis.

PubMed

Glaab, Enrico; Schneider, Reinhard

2015-07-01

High-throughput omics datasets often contain technical replicates included to account for technical sources of noise in the measurement process. Although summarizing these replicate measurements by using robust averages may help to reduce the influence of noise on downstream data analysis, the information on the variance across the replicate measurements is lost in the averaging process and therefore typically disregarded in subsequent statistical analyses.We introduce RepExplore, a web-service dedicated to exploit the information captured in the technical replicate variance to provide more reliable and informative differential expression and abundance statistics for omics datasets. The software builds on previously published statistical methods, which have been applied successfully to biomedical omics data but are difficult to use without prior experience in programming or scripting. RepExplore facilitates the analysis by providing a fully automated data processing and interactive ranking tables, whisker plot, heat map and principal component analysis visualizations to interpret omics data and derived statistics. Freely available at http://www.repexplore.tk enrico.glaab@uni.lu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

Comparisons: Technical-Tactical and Time-Motion Analysis of Mixed Martial Arts by Outcomes.

PubMed

Miarka, Bianca; Vecchio, Fabrício B D; Camey, Suzi; Amtmann, John A

2016-07-01

Miarka, B, Vecchio, FBD, Camey, S, and Amtmann, JA. Comparisons: technical-tactical and time-motion analysis of mixed martial arts by outcomes. J Strength Cond Res 30(7): 1975-1984, 2016-The aim of this study was to compare time-motion and technical-tactical analysis between paired outcomes and rounds of mixed martial arts (MMA) matches. The sample consisted of 645 rounds of MMA competition paired by outcomes (first round, winners n = 215 and losers n = 215; second round, winners n = 215 and losers n = 215; third round, winners n = 215 and losers n = 215). The time-motion variables were categorized into low-intensity or high-intensity, stand-up or groundwork situations. Stand-up techniques were analyzed by observing total strikes to the head and body, and takedowns. The actions on the ground were analyzed by observing submission activity, including successful choking and joint locking actions, and also positional improvements, including advances to the mount, half guard, and side and back positions. Chi-squared and Wilcoxon tests were conducted with a significance level of p ≤ 0.05. Results showed that winners had higher values for total strikes and submissions in all rounds, and also positional improvements, over losers. The standing combat with low-intensity comparisons presented differences between the rounds first, with a median of 2:33.5 (P25-P75%: 1:20-3:56) minute, second, with 2:37 (1:24-3:59) minute, and third, with 2:07 (1:06-3:39.2) minute. These data suggest a focus on the intermittent demand presented in combat phases with a special attention to the strike and ground technical-tactical skills; strength and conditioning coaches could emphasize the effort pause ratios for both standing and ground combat that mimic the requirements of MMA, especially during the third round.

Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

DOT National Transportation Integrated Search

1998-10-01

The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

48 CFR 2131.205-43 - Trade, business, technical and professional activity costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Trade, business, technical and professional activity costs. 2131.205-43 Section 2131.205-43 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT...

48 CFR 1631.205-76 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Trade, business, technical, and professional activity costs. 1631.205-76 Section 1631.205-76 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST...

48 CFR 2131.205-43 - Trade, business, technical and professional activity costs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Trade, business, technical and professional activity costs. 2131.205-43 Section 2131.205-43 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT...

48 CFR 2131.205-43 - Trade, business, technical and professional activity costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Trade, business, technical and professional activity costs. 2131.205-43 Section 2131.205-43 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT, FEDERAL EMPLOYEES GROUP LIFE INSURANCE FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT...

48 CFR 31.205-43 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Trade, business, technical, and professional activity costs. 31.205-43 Section 31.205-43 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations...

48 CFR 31.205-43 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Trade, business, technical, and professional activity costs. 31.205-43 Section 31.205-43 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations...

48 CFR 1631.205-76 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Trade, business, technical, and professional activity costs. 1631.205-76 Section 1631.205-76 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST...

48 CFR 31.205-43 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Trade, business, technical, and professional activity costs. 31.205-43 Section 31.205-43 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations...

48 CFR 1631.205-76 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Trade, business, technical, and professional activity costs. 1631.205-76 Section 1631.205-76 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST...

48 CFR 31.205-43 - Trade, business, technical, and professional activity costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Trade, business, technical, and professional activity costs. 31.205-43 Section 31.205-43 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations...

34 CFR 350.19 - What must a grantee do in carrying out a technical assistance activity?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What must a grantee do in carrying out a technical... DISABILITY AND REHABILITATION RESEARCH PROJECTS AND CENTERS PROGRAM What Projects Does the Secretary Assist? § 350.19 What must a grantee do in carrying out a technical assistance activity? In carrying out a...

77 FR 47495 - Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting-National...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

... intervention and preschool service providers with data on their qualifications, certification, and preparation... Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood Longitudinal Data Systems; Rule #0;#0;Federal Register / Vol. 77, No...

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

PubMed

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuo, Yukinori, E-mail: ymatsuo@kuhp.kyoto-u.ac.

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiplemore » causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.« less

Energy. Application of solar energy in dwellings: A technical and economical analysis for the European community

NASA Astrophysics Data System (ADS)

1980-03-01

The technical possibilities and economical limitations of solar heating systems for the application in swimming pools, hot water preparation, space heating and air conditioning were investigated. This analysis was performed for dwellings with special consideration of the climatic differences in each community. The computer program, which was used for solar system calculations, and all mathematical models, for technical and economical analysis were elucidated. In the technical and economical analysis, the most suitable solar system sizes for each community was determined. Four types of solar collectors were investigated. The single glass selective collector proved to be the most cost effective collector in all the above applications, provided the the additional cost for the selective coating is not more than 20DM/cu. From the results of the analysis certain recommendations were derived, which can improve the rapid implementation of solar heating systems into the market.

UK technical activities associated with the return to Earth of the MIR space station

NASA Astrophysics Data System (ADS)

Crowther, Richard; Tremayne-Smith, Richard

2002-11-01

The British National Space Centre (BNSC) acts as the focus in the United Kingdom (UK) for space-related activities. With the anticipated return to Earth of the MIR space station, BNSC established a group of technical experts to consider the associated implications for the UK, and to address both national and international activities relating to the planned de-orbit. In particular, the risk to the UK of an uncontrolled re-entry was considered in contingency planning and the means for the provision of accurate information to the public and media were established to ensure balanced view of the potential hazards that MIR posed to persons and property on the ground. The MIR de-orbit was exemplary, both in terms of the technical activities of the Rosaviakosmos and the safe disposal of MIR in the Pacific, and in relation to the open and effective communication between agencies and the positive reporting by the media.

ISO Technical Specification for the Ionosphere -IRI Recent Activities

NASA Astrophysics Data System (ADS)

Bilitza, Dieter; Reinisch, Bodo; Tamara, Gulyaeva

ISO Technical Specification TS 16457 recommends the International Reference Ionosphere (IRI) for the specification of ionospheric densities and temperatures. We review the latest develop-ments towards improving the IRI model and the newest version of the model IRI-2010. IRI-2010 includes several important improvements and additions. This presentation introduces these changes and discusses their benefits. The changes affect primarily the density profiles in the bottomside ionosphere and the density and height of the F2 peak, the point of highest density in the ionosphere. An important new addition to the model is the inclusion of auroral boundaries and their movement with magnetic activity. We will also discuss the status of other ongoing IRI activities and some of the recent applications of the IRI model. The homepage for the IRI project is at http://IRI.gsfc.nasa.gov/.

Stages of Concern Profiles for Active Learning Strategies of Agricultural Technical School Teachers in Egypt

ERIC Educational Resources Information Center

Myers, Brian E.; Barrick, R. Kirby; Samy, Mohamed M.

2012-01-01

Purpose: The purpose of the study was to assess Egyptian Agricultural Technical School (ATS) teachers' implementation of active learning strategies in their classrooms. Methods: The Stages of Concern Questionnaire was administered to 230 participants in active learning workshops. After eliminating headmasters, supervisors and people no longer…

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

PubMed Central

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Airborne incidents : an econometric analysis of severity, December 31, 2014 : technical summary

DOT National Transportation Integrated Search

2014-12-31

This is a technical summary of the Airborne Incidents: An Econometric Analysis of Severity main report. : Airborne loss of separation incidents occur when an aircraft breaches the defined separation limit (vertical and/or horizontal) with anoth...

The Reliability of Technical and Tactical Tagging Analysis Conducted by a Semi-Automatic VTS in Soccer.

PubMed

Beato, Marco; Jamil, Mikael; Devereux, Gavin

2018-06-01

The Video Tracking multiple cameras system (VTS) is a technology that records two-dimensional position data (x and y) at high sampling rates (over 25 Hz). The VTS is of great interest because it can record external load variables as well as collect technical and tactical parameters. Performance analysis is mainly focused on physical demands, yet less attention has been afforded to technical and tactical factors. Digital.Stadium® VTS is a performance analysis device widely used at national and international levels (i.e. Italian Serie A, Euro 2016) and the reliability evaluation of its technical tagging analysis (e.g. shots, passes, assists, set pieces) could be paramount for its application at elite level competitions, as well as in research studies. Two professional soccer teams, with 30 male players (age 23 ± 5 years, body mass 78.3 ± 6.9 kg, body height 1.81 ± 0.06 m), were monitored in the 2016 season during a friendly match and data analysis was performed immediately after the game ended. This process was then replicated a week later (4 operators conducted the data analysis in each week). This study reports a near perfect relationship between Match and its Replication. R2 coefficients (relationships between Match and Replication) were highly significant for each of the technical variables considered (p < 0.001). In particular, a high score of interclass correlation and a small coefficient of variation were reported. This study reports meaningless differences between Match and its Replication (intra-day reliability). We concluded that the semi-automatic process behind the Digital.Stadium® VTS was more than capable of recording technical tagging data accurately.

Vocational Qualifications, Employment Status and Income: 2006 Census Analysis. Technical Paper

ERIC Educational Resources Information Center

Daly, Anne

2011-01-01

Two features of the labour market for vocationally qualified workers are explored in this technical paper: the likelihood of self-employment versus wage employment and the determinants of income. The analysis showed that demographic, occupational and local labour market characteristics all influence the likelihood of self-employment. Self-employed…

Benefit Analysis Report, United States Air Force Technical Order Management Systems (AFTOMS)

DOT National Transportation Integrated Search

1989-08-01

This report prepared by the Transportation Systems Center (TSC) concludes an analysis of the Technical Order (TO) costs and benefits, which was originally undertaken as part of the US Air Force Computer-aided Acquisition and Logistics Support (CALS) ...

Technical-tactical analysis of youth olympic taekwondo combat.

PubMed

Tornello, Francesco; Capranica, Laura; Minganti, Carlo; Chiodo, Salvatore; Condello, Giancarlo; Tessitore, Antonio

2014-04-01

The purpose of this study was to define the technical and tactical profiles of official youth taekwondo competitions played under the most recent rules of the International Taekwondo Federation. Tactical actions (i.e., attack, defense, and block), technical executions (from 1- to 4-point scores), kicking legs (i.e., front/rear and right/left), and overall technical effectiveness were investigated in relation to match outcome of semifinal and final competitions (n = 50) of youth (aged 13-14 years) black belt athletes during the Italian Taekwondo Cadet Championship. Differences (p < 0.001) were found among all action typologies (Attack: 50.9 ± 2.2%; Defense: 27.7 ± 1.5%; Block: 21.3 ± 1.6%), with winners showing fewer (p = 0.005) offensive actions and more (p = 0.001) defensive actions with respect to non-winners. Independently from match outcome, technical exchanges showed differences (p < 0.001) for technical executions. Winners resulted more efficient (p < 0.001) for both technical and tactical variables. In general, these findings showed that Cadets tend to adopt an offensive strategy. In considering that the adoption of the new electronic system requires athletes to execute correct technical actions to have a score assigned, coaches should emphasize the effectiveness of scoring techniques and help athletes to effectively improve their defense and counterattack capabilities.

31 CFR 21.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Professional and technical services...

14 CFR 1271.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Professional and technical services. 1271...

40 CFR 34.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Professional and technical services. 34...

24 CFR 87.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Professional and technical services...

22 CFR 712.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 712.300...

22 CFR 311.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 311.300...

45 CFR 604.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 604.300...

Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

PubMed

Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

2014-10-16

In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

Longitudinal Trend Analysis of Performance Indicators for South Carolina's Technical Colleges

ERIC Educational Resources Information Center

Hossain, Mohammad Nurul

2010-01-01

This study included an analysis of the trend of performance indicators for the technical college sector of higher education in South Carolina. In response to demands for accountability and transparency in higher education, the state of South Carolina developed sector specific performance indicators to measure various educational outcomes for each…

29 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 29 Labor 1 2011-07-01 2011-07-01 false Professional and technical services. 93.300 Section 93.300...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Section 438.205 Employees' Benefits SOCIAL SECURITY ADMINISTRATION RESTRICTIONS ON LOBBYING Activities by... influence made by a professional (such as a licensed lawyer) or a technical person (such as a licensed..., communications with the intent to influence made by a lawyer that do not provide legal advice or analysis...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 438.205 Employees' Benefits SOCIAL SECURITY ADMINISTRATION RESTRICTIONS ON LOBBYING Activities by... influence made by a professional (such as a licensed lawyer) or a technical person (such as a licensed..., communications with the intent to influence made by a lawyer that do not provide legal advice or analysis...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Professional and technical services. 82.300 Section 82.300 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Activities... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Professional and technical services. 82.205 Section 82.205 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Activities... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

ERIC Educational Resources Information Center

Whiteside, Aimee L.

2003-01-01

This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

PubMed

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

PubMed

Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

2013-12-01

Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

NAEP 1999 Long-Term Trend Technical Analysis Report: Three Decades of Student Performance. NCES 2005-484

ERIC Educational Resources Information Center

Allen, Nancy L.; McClellan, Catherine A.; Stoeckel, Joan J.

2005-01-01

This report provides an update to the technical analysis procedures documenting the 1996 National Assessment of Educational Progress (NAEP) as presented in "The NAEP 1996 Technical Report" (Allen, Carlson, and Zelenak, 1999). It describes how the 1999 long-term trend data were incorporated into the trend analyses. Since no national main…

Technical efficiency of women's health prevention programs in Bucaramanga, Colombia: a four-stage analysis.

PubMed

Ruiz-Rodriguez, Myriam; Rodriguez-Villamizar, Laura A; Heredia-Pi, Ileana

2016-10-13

Primary Health Care (PHC) is an efficient strategy to improve health outcomes in populations. Nevertheless, studies of technical efficiency in health care have focused on hospitals, with very little on primary health care centers. The objective of the present study was to use the Data Envelopment Analysis to estimate the technical efficiency of three women's health promotion and disease prevention programs offered by primary care centers in Bucaramanga, Colombia. Efficiency was measured using a four-stage data envelopment analysis with a series of Tobit regressions to account for the effect of quality outcomes and context variables. Input/output information was collected from the institutions' records, chart reviews and personal interviews. Information about contextual variables was obtained from databases from the primary health program in the municipality. A jackknife analysis was used to assess the robustness of the results. The analysis was based on data from 21 public primary health care centers. The average efficiency scores, after adjusting for quality and context, were 92.4 %, 97.5 % and 86.2 % for the antenatal care (ANC), early detection of cervical cancer (EDCC) and family planning (FP) programs, respectively. On each program, 12 of the 21 (57.1 %) health centers were found to be technically efficient; having had the best-practice frontiers. Adjusting for context variables changed the scores and reference rankings of the three programs offered by the health centers. The performance of the women's health prevention programs offered by the centers was found to be heterogeneous. Adjusting for context and health care quality variables had a significant effect on the technical efficiency scores and ranking. The results can serve as a guide to strengthen management and organizational and planning processes related to local primary care services operating within a market-based model such as the one in Colombia.

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

NASA Astrophysics Data System (ADS)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Performance Evaluation of Technical Institutions: An Application of Data Envelopment Analysis

ERIC Educational Resources Information Center

Debnath, Roma Mitra; Shankar, Ravi; Kumar, Surender

2008-01-01

Technical institutions (TIs) are playing an important role in making India a knowledge hub of this century. There is still great diversity in their relative performance, which is a matter of concern to the education planner. This article employs the method of data envelopment analysis (DEA) to compare the relative efficiency of TIs in India. The…

Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

PubMed

Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

2017-03-01

The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P < .001). Of a total possible score of 14 using the HONcode analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and

Scalable data management, analysis and visualization (SDAV) Institute. Final Scientific/Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geveci, Berk

The purpose of the SDAV institute is to provide tools and expertise in scientific data management, analysis, and visualization to DOE’s application scientists. Our goal is to actively work with application teams to assist them in achieving breakthrough science, and to provide technical solutions in the data management, analysis, and visualization regimes that are broadly used by the computational science community. Over the last 5 years members of our institute worked directly with application scientists and DOE leadership-class facilities to assist them by applying the best tools and technologies at our disposal. We also enhanced our tools based on inputmore » from scientists on their needs. Many of the applications we have been working with are based on connections with scientists established in previous years. However, we contacted additional scientists though our outreach activities, as well as engaging application teams running on leading DOE computing systems. Our approach is to employ an evolutionary development and deployment process: first considering the application of existing tools, followed by the customization necessary for each particular application, and then the deployment in real frameworks and infrastructures. The institute is organized into three areas, each with area leaders, who keep track of progress, engagement of application scientists, and results. The areas are: (1) Data Management, (2) Data Analysis, and (3) Visualization. Kitware has been involved in the Visualization area. This report covers Kitware’s contributions over the last 5 years (February 2012 – February 2017). For details on the work performed by the SDAV institute as a whole, please see the SDAV final report.« less

Technical activity profile and influence of body anthropometry on playing performance in female elite team handball.

PubMed

Michalsik, Lars B; Aagaard, Per; Madsen, Klavs

2015-04-01

To determine the physical demands placed on female elite team handball (TH) players in relation to playing position and body anthropometry, female elite TH primarily field players were monitored during match-play using video recording and subsequent computerized technical match analysis during 5 regular tournament match seasons. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, technical errors, defensive errors, and tackles) and further divided into various subcategories (e.g., type of shot, hard or light tackles, claspings, screenings, and blockings). Furthermore, anthropometric measurements were performed. Each player had 28.3 ± 11.0 (group means ± SD) high-intense playing actions per match with a total effective playing time of 50.70 ± 5.83 minutes. On average, each player made 2.8 ± 2.6 fast breaks, gave 7.9 ± 14.4 screenings, received 14.6 ± 9.2 tackles in total, and performed 7.7 ± 3.7 shots while in offense, along with 3.5 ± 3.8 blockings, 1.9 ± 2.7 claspings, and 6.2 ± 3.8 hard tackles in defense. Mean body height, body mass, and age in the Danish Premier Female Team Handball League were 175.4 ± 6.1 cm, 69.5 ± 6.5 kg, and 25.4 ± 3.7 years, respectively. Wing players were lighter (63.5 ± 4.8 kg, p < 0.001) and smaller (169.3 ± 4.9 cm, p < 0.001) than backcourt players (BP) (70.6 ± 5.3 kg, 177.0 ± 5.4 cm) and pivots (PV) (72.5 ± 4.9 kg, 177.7 ± 4.9 cm). In conclusion, the present match observations revealed that female elite TH players during competitive games intermittently perform a high number of short-term, high-intense technical playing actions making modern female elite TH a physically demanding team sport. No sign of technical fatigue were observed, since the amount of intense technical playing actions remained unchanged in the second half. Marked positional differences in the physical demands were demonstrated, with wing players performing more fast breaks and less

An Analysis of Costs and Cenefits Associated with Initial Contracting Technical Education and Training for Unrestricted Marine Officers

DTIC Science & Technology

2017-03-01

COSTS AND BENEFITS ASSOCIATED WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS by Lee A. White...WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS 5. FUNDING NUMBERS 6. AUTHOR(S) Lee A. White 7. PERFORMING...unlimited. AN ANALYSIS OF COSTS AND BENEFITS ASSOCIATED WITH INITIAL CONTRACTING TECHNICAL EDUCATION AND TRAINING FOR UNRESTRICTED MARINE OFFICERS

Spatially Oscillating Activity and Microbial Succession of Mercury-Reducing Biofilms in a Technical-Scale Bioremediation System

PubMed Central

von Canstein, Harald; Li, Ying; Leonhäuser, Johannes; Haase, Elke; Felske, Andreas; Deckwer, Wolf-Dieter; Wagner-Döbler, Irene

2002-01-01

Mercury-contaminated chemical wastewater of a mercury cell chloralkali plant was cleaned on site by a technical-scale bioremediation system. Microbial mercury reduction of soluble Hg(II) to precipitating Hg(0) decreased the mercury load of the wastewater during its flow through the bioremediation system by up to 99%. The system consisted of a packed-bed bioreactor, where most of the wastewater's mercury load was retained, and an activated carbon filter, where residual mercury was removed from the bioreactor effluent by both physical adsorption and biological reduction. In response to the oscillation of the mercury concentration in the bioreactor inflow, the zone of maximum mercury reduction oscillated regularly between the lower and the upper bioreactor horizons or the carbon filter. At low mercury concentrations, maximum mercury reduction occurred near the inflow at the bottom of the bioreactor. At high concentrations, the zone of maximum activity moved to the upper horizons. The composition of the bioreactor and carbon filter biofilms was investigated by 16S-23S ribosomal DNA intergenic spacer polymorphism analysis. Analysis of spatial biofilm variation showed an increasing microbial diversity along a gradient of decreasing mercury concentrations. Temporal analysis of the bioreactor community revealed a stable abundance of two prevalent strains and a succession of several invading mercury-resistant strains which was driven by the selection pressure of high mercury concentrations. In the activated carbon filter, a lower selection pressure permitted a steady increase in diversity during 240 days of operation and the establishment of one mercury-sensitive invader. PMID:11916716

Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis.

PubMed

Zhang, Ting; Chen, Juan; Jia, Xiaofeng

2015-01-01

This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006-2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006-2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including "natural products and polymers" with nine key technical points, "fermentation industry" with twelve ones, "electrical medical equipment" with four ones, and "diagnosis, surgery" with four ones. The results of this study could provide guidance on the development direction of oncology, and also help researchers broaden innovative ideas and discover new

CALS Baseline Architecture Analysis of Weapons System. Technical Information: Army, Draft. Volume 8

DOT National Transportation Integrated Search

1989-09-01

This effort was performed to provide a common framework for analysis and planning of CALS initiatives across the military services, leading eventually to the development of a common DoD-wide architecture for CALS. This study addresses Army technical ...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 45 Public Welfare 1 2010-10-01 2010-10-01 false Professional and technical services. 93.300...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical...

Modeling technical efficiency of inshore fishery using data envelopment analysis

NASA Astrophysics Data System (ADS)

Rahman, Rahayu; Zahid, Zalina; Khairi, Siti Shaliza Mohd; Hussin, Siti Aida Sheikh

2016-10-01

Fishery industry contributes significantly to the economy of Malaysia. This study utilized Data Envelopment Analysis application in estimating the technical efficiency of fishery in Terengganu, a state on the eastern coast of Peninsular Malaysia, based on multiple output, i.e. total fish landing and income of fishermen with six inputs, i.e. engine power, vessel size, number of trips, number of workers, cost and operation distance. The data were collected by survey conducted between November and December 2014. The decision making units (DMUs) involved 100 fishermen from 10 fishery areas. The result showed that the technical efficiency in Season I (dry season) and Season II (rainy season) were 90.2% and 66.7% respectively. About 27% of the fishermen were rated to be efficient during Season I, meanwhile only 13% of the fishermen achieved full efficiency 100% during Season II. The results also found out that there was a significance difference in the efficiency performance between the fishery areas.

49 CFR 552.6 - Technical review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6...

49 CFR 552.6 - Technical review.

Code of Federal Regulations, 2011 CFR

2011-10-01

... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with... 49 Transportation 6 2011-10-01 2011-10-01 false Technical review. 552.6 Section 552.6...

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data

PubMed Central

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong

2017-01-01

Abstract Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. PMID:29036714

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study and... attended by more than one unit of government. (d) Eligible activities. Activities eligible for technical.... Activities for which costs are ineligible under this section include: (1) In the case of technical assistance...

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study and... attended by more than one unit of government. (d) Eligible activities. Activities eligible for technical.... Activities for which costs are ineligible under this section include: (1) In the case of technical assistance...

Match-to-match variation in physical activity and technical skill measures in professional Australian Football.

PubMed

Kempton, Thomas; Sullivan, Courtney; Bilsborough, Johann C; Cordy, Justin; Coutts, Aaron J

2015-01-01

To determine the match-to-match variability in physical activity and technical performance measures in Australian Football, and examine the influence of playing position, time of season, and different seasons on these measures of variability. Longitudinal observational study. Global positioning system, accelerometer and technical performance measures (total kicks, handballs, possessions and Champion Data rank) were collected from 33 players competing in the Australian Football League over 31 matches during 2011-2012 (N=511 observations). The global positioning system data were categorised into total distance, mean speed (mmin(-1)), high-speed running (>14.4 kmh(-1)), very high-speed running (>19.9 kmh(-1)), and sprint (>23.0 kmh(-1)) distance while player load was collected from the accelerometer. The data were log transformed to provide coefficient of variation and the between subject standard deviation (expressed as percentages). Match-to-match variability was increased for higher speed activities (high-speed running, very high-speed running, sprint distance, coefficient of variation %: 13.3-28.6%) compared to global measures (speed, total distance, player load, coefficient of variation %: 5.3-9.2%). The between-match variability was relativity stable for all measures between and within AFL seasons, with only few differences between positions. Higher speed activities (high-speed running, very high-speed running, sprint distance), but excluding mean speed, total distance and player load, were all higher in the final third phase of the season compared to the start of the season. While global measures of physical performance are relatively stable, higher-speed activities and technical measures exhibit a large degree of between-match variability in Australian Football. However, these measures remain relatively stable between positions, and within and between Australian Football League seasons. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd

Study of dietary supplements compositions by neutron activation analysis at the VR-1 training reactor

NASA Astrophysics Data System (ADS)

Stefanik, Milan; Rataj, Jan; Huml, Ondrej; Sklenka, Lubomir

2017-11-01

The VR-1 training reactor operated by the Czech Technical University in Prague is utilized mainly for education of students and training of various reactor staff; however, R&D is also carried out at the reactor. The experimental instrumentation of the reactor can be used for the irradiation experiments and neutron activation analysis. In this paper, the neutron activation analysis (NAA) is used for a study of dietary supplements containing the zinc (one of the essential trace elements for the human body). This analysis includes the dietary supplement pills of different brands; each brand is represented by several different batches of pills. All pills were irradiated together with the standard activation etalons in the vertical channel of the VR-1 reactor at the nominal power (80 W). Activated samples were investigated by the nuclear gamma-ray spectrometry technique employing the semiconductor HPGe detector. From resulting saturated activities, the amount of mineral element (Zn) in the pills was determined using the comparative NAA method. The results show clearly that the VR-1 training reactor is utilizable for neutron activation analysis experiments.

CACDA Jiffy War Game Technical Manual. Part 1: Methodology

DTIC Science & Technology

1977-03-01

Systems Analysis Office (Mr Tyburski) Fort Monmout’.h, NJ 07703 Commander 1* USAISD ATTN: ATISE-TD-TS-CD (LT Boyer) Fort Deven , MASS 01433 Commander 2...Developments Activity Fort Leavenworth, Kansas 66027 CACDA JIFFY WAR GAME TECHNICAL MANUAL Part 1: Methodology by Timothy J. Bailey and Gerald A. Martin ACN...ComrbatDevelopments Activity (CACDA), Fort Leavenworth,i-Xsas," for scenario devel- opment and force structure evaluation. The Jiffy Game computer

The Changing Nature of Technical Assistance.

ERIC Educational Resources Information Center

Noggle, Nelson L.

The changing nature of technical assistance activities and evaluation for compensatory education programs was discussed. The emphasis is on the Education Consolidation and Improvement Act (ECIA) Chapter 1 Technical Assistance Centers (TAC) and their clients. Improvement of school practices demands that the technical assistance process be developed…

12 CFR 1805.303 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... proposes to become a CDFI. Such technical assistance may include training for management and other... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Technical assistance. 1805.303 Section 1805.303... COMMUNITY DEVELOPMENT FINANCIAL INSTITUTIONS PROGRAM Use of Funds/Eligible Activities § 1805.303 Technical...

Technical Training for Managers.

ERIC Educational Resources Information Center

Haverland, Edgar M.

The question has arisen as to what kind of information a manager without extensive technical training needs to learn to supervise effectively. For example, the Nike Hercules fire control platoon leader, usually an officer in his first active duty assignment, seldom has had extensive technical training. Yet he is responsibile for the…

Integrated corridor management initiative : demonstration phase evaluation – Dallas technical capability analysis test plan.

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor Management (ICM) Initiative Demonstration. The ICM ...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Professional and technical services. 69...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 138.205...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Professional and technical...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... technical services. 45.300 Section 45.300 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... technical services. 45.205 Section 45.205 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 227.205...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 519.205...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 227.205...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Professional and technical...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 138.205...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... technical services. 45.300 Section 45.300 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 49 Transportation 1 2011-10-01 2011-10-01 false Professional and technical services. 20.300...

System analysis of vehicle active safety problem

NASA Astrophysics Data System (ADS)

Buznikov, S. E.

2018-02-01

The problem of the road transport safety affects the vital interests of the most of the population and is characterized by a global level of significance. The system analysis of problem of creation of competitive active vehicle safety systems is presented as an interrelated complex of tasks of multi-criterion optimization and dynamic stabilization of the state variables of a controlled object. Solving them requires generation of all possible variants of technical solutions within the software and hardware domains and synthesis of the control, which is close to optimum. For implementing the task of the system analysis the Zwicky “morphological box” method is used. Creation of comprehensive active safety systems involves solution of the problem of preventing typical collisions. For solving it, a structured set of collisions is introduced with its elements being generated also using the Zwicky “morphological box” method. The obstacle speed, the longitudinal acceleration of the controlled object and the unpredictable changes in its movement direction due to certain faults, the road surface condition and the control errors are taken as structure variables that characterize the conditions of collisions. The conditions for preventing typical collisions are presented as inequalities for physical variables that define the state vector of the object and its dynamic limits.

Special Analysis: 2017-001 Disposal of Drums Containing Enriched Uranium in Pit 38 at Technical Area 54, Area G

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birdsell, Kay Hanson; Stauffer, Philip H.; French, Sean B.

Los Alamos National Laboratory (LANL) generates radioactive waste as a result of various activities. Operational waste is generated from a wide variety of research and development activities including nuclear weapons development, energy production, and medical research. Environmental restoration (ER), and decontamination and decommissioning (D&D) waste is generated as contaminated sites and facilities at LANL undergo cleanup or remediation. The majority of this waste is low-level radioactive waste (LLW) and is disposed of at the Technical Area 54 (TA-54), Area G disposal facility. This special analysis, SA 2017-001, evaluates the potential impacts of disposing of this waste in Pit 38 atmore » Area G based on the assumptions that form the basis of the Area G PA/CA. Section 2 describes the methods used to conduct the analysis; the results of the evaluation are provided in Section 3; and conclusions and recommendations are provided in Section 4.« less

Technical activities of the configuration aeroelasticity branch

NASA Technical Reports Server (NTRS)

Cole, Stanley R. (Editor)

1991-01-01

A number of recent technical activities of the Configuration Aeroelasticity Branch of the NASA Langley Research Center are discussed in detail. The information on the research branch is compiled in twelve separate papers. The first of these topics is a summary of the purpose of the branch, including a full description of the branch and its associated projects and program efforts. The next ten papers cover specific projects and are as follows: Experimental transonic flutter characteristics of supersonic cruise configurations; Aeroelastic effects of spoiler surfaces mounted on a low aspect ratio rectangular wing; Planform curvature effects on flutter of 56 degree swept wing determined in Transonic Dynamics Tunnel (TDT); An introduction to rotorcraft testing in TDT; Rotorcraft vibration reduction research at the TDT; A preliminary study to determine the effects of tip geometry on the flutter of aft swept wings; Aeroelastic models program; NACA 0012 pressure model and test plan; Investigation of the use of extension twist coupling in composite rotor blades; and Improved finite element methods for rotorcraft structures. The final paper describes the primary facility operation by the branch, the Langley TDT.

Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis

PubMed Central

Zhang, Ting; Chen, Juan; Jia, Xiaofeng

2015-01-01

Background This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Methodology/Principal Findings Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006–2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006–2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including “natural products and polymers” with nine key technical points, “fermentation industry” with twelve ones, “electrical medical equipment” with four ones, and “diagnosis, surgery” with four ones. Conclusions/Significance The results of this study could provide guidance on the development

34 CFR 300.702 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance. 300.702 Section 300.702 Education..., and Use of Funds § 300.702 Technical assistance. (a) In general. The Secretary may reserve not more... to support technical assistance activities authorized under section 616(i) of the Act. (b) Maximum...

The scientists' opposition to SDI: How political views affect technical analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tait, G.E.

1989-01-01

This study examines the scientists' opposition to President Reagan's Strategic Defense Initiative (1983-1989) with a focus on the relationship between the scientists' political and strategic opposition to ballistic missile defenses (BMD) and their technical doubts about BMD technologies. The study begins with a review of the scientists' increased influence in United State's national security decision making because of the development of atomic weapons. The study then examines the scientists' role in developing and promoting a theory of arms control based upon mutual societal vulnerability. Because of this theory, a large segment of the American scientific community came to believe thatmore » the development of ballistic missile defenses would destabilize the strategic balance and therefore took the lead in arguing against BMD deployments. These background chapters conclude with an analysis of the scientists' involvement in the political campaign to stop the proposed Sentinel and Safeguard Anti-Ballistic Missile defense. The study then turns to the contemporary scientific opposition to BMD deployments and the SDI research program. After examining the polls and petitions that identify the scientists opposed to SDI, the study analyzes the tactics that three scientists use in their political effort to prevent BMD deployments. Next, an examination of the political and strategic assumptions behind the scientists' opposition to BMD reveals that a belief in the arms control process and deterrence by punishment, especially Assured Destruction deterrence, with a fear of an action-reaction arms race inspires much of the contemporary opposition to BMD. Finally, the scientists' technical doubts about BMD technologies are analyzed through the prism of peer critique. These critiques show that the scientists opposed to BMD deployments us pessimistic and unrealistic assumptions to skew their technical analysis of BMD technologies.« less

Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

PubMed

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2015-02-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Accounting for technical noise in differential expression analysis of single-cell RNA sequencing data.

PubMed

Jia, Cheng; Hu, Yu; Kelly, Derek; Kim, Junhyong; Li, Mingyao; Zhang, Nancy R

2017-11-02

Recent technological breakthroughs have made it possible to measure RNA expression at the single-cell level, thus paving the way for exploring expression heterogeneity among individual cells. Current single-cell RNA sequencing (scRNA-seq) protocols are complex and introduce technical biases that vary across cells, which can bias downstream analysis without proper adjustment. To account for cell-to-cell technical differences, we propose a statistical framework, TASC (Toolkit for Analysis of Single Cell RNA-seq), an empirical Bayes approach to reliably model the cell-specific dropout rates and amplification bias by use of external RNA spike-ins. TASC incorporates the technical parameters, which reflect cell-to-cell batch effects, into a hierarchical mixture model to estimate the biological variance of a gene and detect differentially expressed genes. More importantly, TASC is able to adjust for covariates to further eliminate confounding that may originate from cell size and cell cycle differences. In simulation and real scRNA-seq data, TASC achieves accurate Type I error control and displays competitive sensitivity and improved robustness to batch effects in differential expression analysis, compared to existing methods. TASC is programmed to be computationally efficient, taking advantage of multi-threaded parallelization. We believe that TASC will provide a robust platform for researchers to leverage the power of scRNA-seq. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Meta-analysis of the technical performance of an imaging procedure: Guidelines and statistical methodology

PubMed Central

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2017-01-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test–retest repeatability data for illustrative purposes. PMID:24872353

Recreational technical diving part 1: an introduction to technical diving methods and activities.

PubMed

Mitchell, Simon J; Doolette, David J

2013-06-01

Technical divers use gases other than air and advanced equipment configurations to conduct dives that are deeper and/or longer than typical recreational air dives. The use of oxygen-nitrogen (nitrox) mixes with oxygen fractions higher than air results in longer no-decompression limits for shallow diving, and faster decompression from deeper dives. For depths beyond the air-diving range, technical divers mix helium, a light non-narcotic gas, with nitrogen and oxygen to produce 'trimix'. These blends are tailored to the depth of intended use with a fraction of oxygen calculated to produce an inspired oxygen partial pressure unlikely to cause cerebral oxygen toxicity and a nitrogen fraction calculated to produce a tolerable degree of nitrogen narcosis. A typical deep technical dive will involve the use of trimix at the target depth with changes to gases containing more oxygen and less inert gas during the decompression. Open-circuit scuba may be used to carry and utilise such gases, but this is very wasteful of expensive helium. There is increasing use of closed-circuit 'rebreather' devices. These recycle expired gas and potentially limit gas consumption to a small amount of inert gas to maintain the volume of the breathing circuit during descent and the amount of oxygen metabolised by the diver. This paper reviews the basic approach to planning and execution of dives using these methods to better inform physicians of the physical demands and risks.

45 CFR 1230.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 45 Public Welfare 4 2010-10-01 2010-10-01 false Professional and technical services. 1230.300...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 138.300...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 45 Public Welfare 1 2010-10-01 2010-10-01 false Professional and technical services. 93.205...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Professional and technical services...

32 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 32 National Defense 1 2010-07-01 2010-07-01 false Professional and technical services. 28.300...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... their professional or technical expertise and unless the advice or analysis is rendered directly and... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Professional and technical services. 411.205...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... their professional or technical expertise and unless the advice or analysis is rendered directly and... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Professional and technical services. 438.300...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 227.300...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... 32 National Defense 1 2010-07-01 2010-07-01 false Professional and technical services. 28.205...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Professional and technical services. 18...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Professional and technical services. 69...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... their professional or technical expertise and unless the advice or analysis is rendered directly and... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 1158.205...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 10 Energy 4 2011-01-01 2011-01-01 false Professional and technical services. 601.300 Section 601...

45 CFR 1230.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... section, “professional and technical services” shall be limited to advice and analysis directly applying... this section unless they provide advice and analysis directly applying their professional or technical... 45 Public Welfare 4 2011-10-01 2011-10-01 false Professional and technical services. 1230.205...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 519.300...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 311.205...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 34 Education 1 2011-07-01 2011-07-01 false Professional and technical services. 82.300 Section 82...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... 32 National Defense 1 2011-07-01 2011-07-01 false Professional and technical services. 28.205...

Application of Surface Analysis Methods to Nanomaterials: Summaryof ISO/TC 201 Technical Report: ISO 14187:2011 -Surface Chemical Analysis- Characterization of Nanomaterials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.

ISO Technical Report (TR) 14187 provides an introduction to (and examples of) the information that can be obtained about nanostructured materials using surface-analysis tools. In addition, both general issues and challenges associated with characterising nanostructured materials and the specific opportunities and challenges associated with individual analytical methods are identified. As the size of objects or components of materials approaches a few nanometres, the distinctions among 'bulk', 'surface' and 'particle' analysis blur. This Technical Report focuses on issues specifically relevant to surface chemical analysis of nanostructured materials. The report considers a variety of analysis methods but focuses on techniques that aremore » in the domain of ISO/TC 201 including Auger electron spectroscopy, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and scanning probe microscopy. Measurements of nanoparticle surface properties such as surface potential that are often made in a solution are not discussed.« less

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Professional and technical services...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Professional and technical services...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Professional and technical services. 34...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Professional and technical services. 1271...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... professional or technical expertise and unless the advice or analysis is rendered directly and solely in the... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Professional and technical services. 411.300...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 712.205...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 604.205...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... professional or technical expertise and unless the advice or analysis is rendered directly and solely in the... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 1158.300...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Professional and technical services. 34...

34 CFR 380.6 - What activities may the Secretary fund under technical assistance supported employment projects?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED EMPLOYMENT SERVICES TO INDIVIDUALS... 34 Education 2 2010-07-01 2010-07-01 false What activities may the Secretary fund under technical...

RADON REDUCTION TECHNIQUES FOR EXISTING DETACHED HOUSES - TECHNICAL GUIDANCE (THIRD EDITION) FOR ACTIVE SOIL DEPRESSURIZATION SYSTEMS

EPA Science Inventory

This technical guidance document is designed to aid in the selection, design, installation and operation of indoor radon reduction techniques using soil depressurization in existing houses. Its emphasis is on active soil depressurization; i.e., on systems that use a fan to depre...

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones

PubMed Central

Munivrana, Goran; Petrinović, Lidija Zekan; Kondrič, Miran

2015-01-01

For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire) was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster) analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A) used in the phase of preparing one’s own and disabling the opponent’s attack; a group of technical-tactical elements (B) used in the phase of attack and counterattack; and a group of technical-tactical elements (C) used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts’ scores. PMID:26557204

Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones.

PubMed

Munivrana, Goran; Petrinović, Lidija Zekan; Kondrič, Miran

2015-09-29

For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire) was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster) analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A) used in the phase of preparing one's own and disabling the opponent's attack; a group of technical-tactical elements (B) used in the phase of attack and counterattack; and a group of technical-tactical elements (C) used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts' scores.

[Evaluation of residual osteomuscular function using computerised movement analysis for building sector workers: specificity and technical problem].

PubMed

D'Orso, M I; Centemeri, R; Latocca, R; Riva, M; Cesana, G

2012-01-01

Occupational Health Doctors active in building sector firms frequently have to evaluate residual workers' osteomuscular function in patients coming back to work after an accident happened during work time or free time. Definition of their specific individual work suitability is usually carried out utilizing semeiotic tests in which subjective evaluation of every single Medical Doctor is real important in definition of final results and this fact can cause legal controversies. In our research we describe the application of computerised movement analysis on 10 workers of building sector. In every patient examined this technical method has been able to study objectively the tridimensional ranges of motion of most important osteomuscular districts. The possibility to have an objective evaluation of residual osteomuscular function has a relevant importance both in definition of workers' work suitability at the moment in which they start again their activities and in possible future legal conflicts.

Ownership and technical efficiency of hospitals: evidence from Ghana using data envelopment analysis.

PubMed

Jehu-Appiah, Caroline; Sekidde, Serufusa; Adjuik, Martin; Akazili, James; Almeida, Selassi D; Nyonator, Frank; Baltussen, Rob; Asbu, Eyob Zere; Kirigia, Joses Muthuri

2014-04-08

In order to measure and analyse the technical efficiency of district hospitals in Ghana, the specific objectives of this study were to (a) estimate the relative technical and scale efficiency of government, mission, private and quasi-government district hospitals in Ghana in 2005; (b) estimate the magnitudes of output increases and/or input reductions that would have been required to make relatively inefficient hospitals more efficient; and (c) use Tobit regression analysis to estimate the impact of ownership on hospital efficiency. In the first stage, we used data envelopment analysis (DEA) to estimate the efficiency of 128 hospitals comprising of 73 government hospitals, 42 mission hospitals, 7 quasi-government hospitals and 6 private hospitals. In the second stage, the estimated DEA efficiency scores are regressed against hospital ownership variable using a Tobit model. This was a retrospective study. In our DEA analysis, using the variable returns to scale model, out of 128 district hospitals, 31 (24.0%) were 100% efficient, 25 (19.5%) were very close to being efficient with efficiency scores ranging from 70% to 99.9% and 71 (56.2%) had efficiency scores below 50%. The lowest-performing hospitals had efficiency scores ranging from 21% to 30%.Quasi-government hospitals had the highest mean efficiency score (83.9%) followed by public hospitals (70.4%), mission hospitals (68.6%) and private hospitals (55.8%). However, public hospitals also got the lowest mean technical efficiency scores (27.4%), implying they have some of the most inefficient hospitals.Regarding regional performance, Northern region hospitals had the highest mean efficiency score (83.0%) and Volta Region hospitals had the lowest mean score (43.0%).From our Tobit regression, we found out that while quasi-government ownership is positively associated with hospital technical efficiency, private ownership negatively affects hospital efficiency. It would be prudent for policy-makers to examine the

Ownership and technical efficiency of hospitals: evidence from Ghana using data envelopment analysis

PubMed Central

2014-01-01

Background In order to measure and analyse the technical efficiency of district hospitals in Ghana, the specific objectives of this study were to (a) estimate the relative technical and scale efficiency of government, mission, private and quasi-government district hospitals in Ghana in 2005; (b) estimate the magnitudes of output increases and/or input reductions that would have been required to make relatively inefficient hospitals more efficient; and (c) use Tobit regression analysis to estimate the impact of ownership on hospital efficiency. Methods In the first stage, we used data envelopment analysis (DEA) to estimate the efficiency of 128 hospitals comprising of 73 government hospitals, 42 mission hospitals, 7 quasi-government hospitals and 6 private hospitals. In the second stage, the estimated DEA efficiency scores are regressed against hospital ownership variable using a Tobit model. This was a retrospective study. Results In our DEA analysis, using the variable returns to scale model, out of 128 district hospitals, 31 (24.0%) were 100% efficient, 25 (19.5%) were very close to being efficient with efficiency scores ranging from 70% to 99.9% and 71 (56.2%) had efficiency scores below 50%. The lowest-performing hospitals had efficiency scores ranging from 21% to 30%. Quasi-government hospitals had the highest mean efficiency score (83.9%) followed by public hospitals (70.4%), mission hospitals (68.6%) and private hospitals (55.8%). However, public hospitals also got the lowest mean technical efficiency scores (27.4%), implying they have some of the most inefficient hospitals. Regarding regional performance, Northern region hospitals had the highest mean efficiency score (83.0%) and Volta Region hospitals had the lowest mean score (43.0%). From our Tobit regression, we found out that while quasi-government ownership is positively associated with hospital technical efficiency, private ownership negatively affects hospital efficiency. Conclusions It would be

[Analysis of the technical efficiency of hospitals in the Spanish National Health Service].

PubMed

Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

To analyse the technical efficiency and productivity of general hospitals in the Spanish National Health Service (NHS) (2010-2012) and identify explanatory hospital and regional variables. 230 NHS hospitals were analysed by data envelopment analysis for overall, technical and scale efficiency, and Malmquist index. The robustness of the analysis is contrasted with alternative input-output models. A fixed effects multilevel cross-sectional linear model was used to analyse the explanatory efficiency variables. The average rate of overall technical efficiency (OTE) was 0.736 in 2012; there was considerable variability by region. Malmquist index (2010-2012) is 1.013. A 23% variability in OTE is attributable to the region in question. Statistically significant exogenous variables (residents per 100 physicians, aging index, average annual income per household, essential public service expenditure and public health expenditure per capita) explain 42% of the OTE variability between hospitals and 64% between regions. The number of residents showed a statistically significant relationship. As regards regions, there is a statistically significant direct linear association between OTE and annual income per capita and essential public service expenditure, and an indirect association with the aging index and annual public health expenditure per capita. The significant room for improvement in the efficiency of hospitals is conditioned by region-specific characteristics, specifically aging, wealth and the public expenditure policies of each one. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Meta-Analysis as a Choice to Improve Research in Career and Technical Education

ERIC Educational Resources Information Center

Gordon, Howard R. D.; McClain, Clifford R.; Kim, Yeonsoo; Maldonado, Cecilia

2010-01-01

A search of the ERIC and Academic Search Premier data bases, and a comprehensive review of literature suggest that meta-analysis is ignored by career and technical education (CTE) researchers, a situation that is regrettable but remediable. The purpose of this theoretical paper is to provide CTE researchers and consumers with procedures for…

[Evaluation of the lifestyle of students of physiotherapy and technical & computer science basing on their diet and physical activity].

PubMed

Medrela-Kuder, Ewa

2011-01-01

The aim of the study was the evaluation of a dietary habits profile and physical activity of Physiotherapy and Technical & Computer Science students. The research involved a group of 174 non-full-time students of higher education institutions in Krakow aged between 22 and 27. 81 students of the surveyed studied Physiotherapy at the University of Physical Education, whereas 93 followed a course in Technical & Computer Science at the Pedagogical University. In this project a diagnostic survey method was used. The study revealed that the lifestyle of university youth left much to be desired. Dietary errors were exemplified by irregular meals intake, low consumption of fish, milk and dairy, snacking between meals on high calorie products with a poor nutrient content. With regard to physical activity, Physiotherapy students were characterised by more positive attitudes than those from Technical & Computer Science. Such physical activity forms as swimming, team sports, cycling and strolling were declared by the surveyed the most frequently. Health-oriented education should be introduced in such a way as to improve the knowledge pertaining to a health-promoting lifestyle as a means of prevention of numerous diseases.

Quantifying technical skills during open operations using video-based motion analysis.

PubMed

Glarner, Carly E; Hu, Yue-Yung; Chen, Chia-Hsiung; Radwin, Robert G; Zhao, Qianqian; Craven, Mark W; Wiegmann, Douglas A; Pugh, Carla M; Carty, Matthew J; Greenberg, Caprice C

2014-09-01

Objective quantification of technical operative skills in surgery remains poorly defined, although the delivery of and training in these skills is essential to the profession of surgery. Attempts to measure hand kinematics to quantify operative performance primarily have relied on electromagnetic sensors attached to the surgeon's hand or instrument. We sought to determine whether a similar motion analysis could be performed with a marker-less, video-based review, allowing for a scalable approach to performance evaluation. We recorded six reduction mammoplasty operations-a plastic surgery procedure in which the attending and resident surgeons operate in parallel. Segments representative of surgical tasks were identified with Multimedia Video Task Analysis software. Video digital processing was used to extract and analyze the spatiotemporal characteristics of hand movement. Attending plastic surgeons appear to use their nondominant hand more than residents when cutting with the scalpel, suggesting more use of countertraction. While suturing, attendings were more ambidextrous, with smaller differences in movement between their dominant and nondominant hands than residents. Attendings also seem to have more conservation of movement when performing instrument tying than residents, as demonstrated by less nondominant hand displacement. These observations were consistent within procedures and between the different attending plastic surgeons evaluated in this fashion. Video motion analysis can be used to provide objective measurement of technical skills without the need for sensors or markers. Such data could be valuable in better understanding the acquisition and degradation of operative skills, providing enhanced feedback to shorten the learning curve. Copyright © 2014 Mosby, Inc. All rights reserved.

Standardizing Activation Analysis: New Software for Photon Activation Analysis

NASA Astrophysics Data System (ADS)

Sun, Z. J.; Wells, D.; Segebade, C.; Green, J.

2011-06-01

Photon Activation Analysis (PAA) of environmental, archaeological and industrial samples requires extensive data analysis that is susceptible to error. For the purpose of saving time, manpower and minimizing error, a computer program was designed, built and implemented using SQL, Access 2007 and asp.net technology to automate this process. Based on the peak information of the spectrum and assisted by its PAA library, the program automatically identifies elements in the samples and calculates their concentrations and respective uncertainties. The software also could be operated in browser/server mode, which gives the possibility to use it anywhere the internet is accessible. By switching the nuclide library and the related formula behind, the new software can be easily expanded to neutron activation analysis (NAA), charged particle activation analysis (CPAA) or proton-induced X-ray emission (PIXE). Implementation of this would standardize the analysis of nuclear activation data. Results from this software were compared to standard PAA analysis with excellent agreement. With minimum input from the user, the software has proven to be fast, user-friendly and reliable.

A Meta-Analysis of Motivational Interviewing Process: Technical, Relational, and Conditional Process Models of Change

PubMed Central

Magill, Molly; Apodaca, Timothy R.; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E.F.; Tonigan, J. Scott; Moyers, Theresa

2018-01-01

Objective In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. Method A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Results Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = −.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intra-personal moderators. Conclusions This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. PMID:29265832

A meta-analysis of motivational interviewing process: Technical, relational, and conditional process models of change.

PubMed

Magill, Molly; Apodaca, Timothy R; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E F; Tonigan, J Scott; Moyers, Theresa

2018-02-01

In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3,025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = -.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intrapersonal moderators. This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

PubMed

Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

2016-06-01

Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p < 0.001). Within the pelvis, more errors were observed during dissection on the right side than the left (p = 0.03). Test-retest confirmed reliability (r = 0.97, p < 0.001). A significant correlation was observed between error frequency and mesorectal specimen quality (r s = 0.52, p = 0.02) and with blood loss (r s = 0.609, p = 0.004). OCHRA offers a valid and reliable method for evaluating technical performance of laparoscopic rectal surgery.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 652.4 - Technical service standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

Mechanistic approach to generalized technical analysis of share prices and stock market indices

NASA Astrophysics Data System (ADS)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

Repeated Kicking Actions in Karate: Effect on Technical Execution in Elite Practitioners.

PubMed

Quinzi, Federico; Camomilla, Valentina; Di Mario, Alberto; Felici, Francesco; Sbriccoli, Paola

2016-04-01

Training in martial arts is commonly performed by repeating a technical action continuously for a given number of times. This study aimed to investigate if the repetition of the task alters the proper technical execution, limiting the training efficacy for the technical evaluation during competition. This aim was pursued analyzing lower-limb kinematics and muscle activation during repeated roundhouse kicks. Six junior karate practitioners performed continuously 20 repetitions of the kick. Hip and knee kinematics and sEMG of vastus lateralis, biceps (BF), and rectus femoris were recorded. For each repetition, hip abduction-adduction and flexion-extension and knee flexion-extension peak angular displacements and velocities, agonist and antagonist muscle activation were computed. Moreover, to monitor for the presence of myoelectric fatigue, if any, the median frequency of the sEMG was computed. All variables were normalized with respect to their individual maximum observed during the sequence of kicks. Linear regressions were fitted to each normalized parameter to test its relationship with the repetition number. Linear-regression analysis showed that, during the sequence, the athletes modified their technique: Knee flexion, BF median frequency, hip abduction, knee-extension angular velocity, and BF antagonist activation significantly decreased. Conversely, hip flexion increased significantly. Since karate combat competitions require proper technical execution, training protocols combining severe fatigue and technical actions should be carefully proposed because of technique adaptations. Moreover, trainers and karate masters should consider including specific strength exercises for the BF and more generally for knee flexors.

41 CFR 105-69.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... section, “professional and technical services” shall be limited to advice and analysis directly applying... this section unless they provide advice and analysis directly applying their professional or technical... technical services. 105-69.205 Section 105-69.205 Public Contracts and Property Management Federal Property...

Head Start Impact Study. Technical Report

ERIC Educational Resources Information Center

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

38 CFR 61.55 - Technical assistance reports.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.55 Technical assistance reports. Each recipient of a technical assistance grant must submit to VA, quarterly, a report describing the activities... 38 Pensions, Bonuses, and Veterans' Relief 2 2011-07-01 2011-07-01 false Technical assistance...

38 CFR 61.55 - Technical assistance reports.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.55 Technical assistance reports. Each recipient of a technical assistance grant must submit to VA, quarterly, a report describing the activities... 38 Pensions, Bonuses, and Veterans' Relief 2 2012-07-01 2012-07-01 false Technical assistance...

38 CFR 61.55 - Technical assistance reports.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.55 Technical assistance reports. Each recipient of a technical assistance grant must submit to VA, quarterly, a report describing the activities... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Technical assistance...

41 CFR 105-69.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... technical services. 105-69.300 Section 105-69.300 Public Contracts and Property Management Federal Property...

[Multilevel analysis of the technical efficiency of hospitals in the Spanish National Health System by property and type of management].

PubMed

Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

2018-05-11

To analyze technical efficiency by type of property and management of general hospitals in the Spanish National Health System (2010-2012) and identify hospital and regional explanatory variables. 230 hospitals were analyzed combining data envelopment analysis and fixed effects multilevel linear models. Data envelopment analysis measured overall, technical and scale efficiency, and the analysis of explanatory factors was performed using multilevel models. The average rate of overall technical efficiency of hospitals without legal personality is lower than hospitals with legal personality (0.691 and 0.876 in 2012). There is a significant variability in efficiency under variable returns (TE) by direct, indirect and mixed forms of management. The 29% of the variability in TE es attributable to the Region. Legal personality increased the TE of the hospitals by 11.14 points. On the other hand, most of the forms of management (different to those of the traditional hospitals) increased TE in varying percentages. At regional level, according to the model considered, insularity and average annual income per household are explanatory variables of TE. Having legal personality favours technical efficiency. The regulatory and management framework of hospitals, more than public or private ownership, seem to explain technical efficiency. Regional characteristics explain the variability in TE. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

DMT-TAFM: a data mining tool for technical analysis of futures market

NASA Astrophysics Data System (ADS)

Stepanov, Vladimir; Sathaye, Archana

2002-03-01

Technical analysis of financial markets describes many patterns of market behavior. For practical use, all these descriptions need to be adjusted for each particular trading session. In this paper, we develop a data mining tool for technical analysis of the futures markets (DMT-TAFM), which dynamically generates rules based on the notion of the price pattern similarity. The tool consists of three main components. The first component provides visualization of data series on a chart with different ranges, scales, and chart sizes and types. The second component constructs pattern descriptions using sets of polynomials. The third component specifies the training set for mining, defines the similarity notion, and searches for a set of similar patterns. DMT-TAFM is useful to prepare the data, and then reveal and systemize statistical information about similar patterns found in any type of historical price series. We performed experiments with our tool on three decades of trading data fro hundred types of futures. Our results for this data set shows that, we can prove or disprove many well-known patterns based on real data, as well as reveal new ones, and use the set of relatively consistent patterns found during data mining for developing better futures trading strategies.

Minnesota Deaf-Blind Technical Assistance Project. Final Report.

ERIC Educational Resources Information Center

Kloos, Eric

This final report describes activities and accomplishments of the 3-year federally supported Minnesota Deaf-Blind Technical Assistance Project. The project provided training and technical assistance, information sharing, and support services to families of children with deaf-blindness. Activities and accomplishments included: collaboration with…

CURRENT TECHNICAL PROBLEMS IN EMERGY ANALYSIS

EPA Science Inventory

: Emergy Analysis has been a rapidly evolving assessment methodology for the past 30 years. This process of development was primarily driven by the inquiring mind and ceaseless activity of its founder, H.T. Odum, his students, and colleagues. Historically, as new kinds of proble...

Sustainable hydropower in Lower Mekong Countries: Technical assessment and training travel report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadjerioua, Boualem; Witt, Adam M.

The U.S. Agency for International Development (USAID), through their partnership with the U.S. Department of the Interior (DOI), requested the support of Oak Ridge National Laboratory (ORNL) to provide specialized technical assistance as part of the Smart Infrastructure for the Mekong (SIM) Program in Thailand. Introduced in July 2013 by U.S. Secretary of State John Kerry, SIM is a U.S. Government Inter-Agency program that provides Lower Mekong partner countries with targeted, demand-driven technical and scientific assistance to support environmentally sound, climate conscious and socially equitable infrastructure, clean energy development, and water resources optimization. The U.S. Government is committed to supportingmore » sustainable economic development within the region by providing tools, best practices, technical assistance, and lessons learned for the benefit of partner countries. In response to a request from the Electricity Generating Authority of Thailand (EGAT), a SIM project was developed with two main activities: 1) to promote hydropower sustainability and efficiency through technical assessment training at two existing hydropower assets in Thailand, and 2) the design and implementation of one national and two or three regional science and policy workshops, to be co-hosted with EGAT, to build common understanding of and commitment to environmental and social safeguards for Mekong Basin hydropower projects. The U.S. Department of Energy (DOE) is leading the technical assessment (Activity 1), and has contracted ORNL to provide expert technical assistance focused on increasing efficiency at existing projects, with the goal of increasing renewable energy generation at little to no capital cost. ORNL is the leading national laboratory in hydropower analysis, with a nationally recognized and highly qualified team of scientists addressing small to large-scale systems (basin-, regional-, and national-scale) energy generation optimization analysis for DOE

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

Why and How to Advance Technical Copywriting.

ERIC Educational Resources Information Center

Henson, Leigh

1996-01-01

States that promotional writing for industrial/high-tech products, or technical copywriting, is gaining more attention in technical communication, although it is neglected in higher education. Testifies to the significance of technical copywriting. Suggests that dialogical audience analysis and an emphasis on rational appeal will contribute to…

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

The 1996 NAEP Technical Report.

ERIC Educational Resources Information Center

Allen, Nancy L.; Carlson, James E.; Zelenak, Christine A.

This report documents the design, administration, and data analysis procedure of the National Assessment of Education Progress (NAEP) for 1996. It indicates the technical decisions that were made and the rationale behind them. Detailed substantive findings are not presented in this report. These chapters provide technical information about the…

Analysis of technical spin-off effects of space-related R&D by means of patent indicators

NASA Astrophysics Data System (ADS)

Schmoch, U.; Kirsch, N.; Ley, W.; Plescher, E.; Jung, K. O.

In view of increasing European activity in the field of manned space travel, intense discussion has arisen on the significance of associated spin-off effects. Alongside this predominantly political debate, however, there is also a purely pragmatic interest in transferring wherever possible the successful results from space research to other branches of industry, in order to achieve optimum exploitation of all the resources available. Until now, spin-offs from space technology have been analyzed by means of interviews conducted in the firms involved, a process harbouring a whole series of uncertainty factors. Potential spin-off fields are frequently ignored, and alleged transfers from space research often in reality stem from other sources. This survey develops an objective method of describing technology transfer based on patent indicators. The first step was to establish on line a total of some 3000 space patents filed since 1975 with destination to the European and American markets. This record is sufficient to permit an analysis of the R&D activities undertaken by the leading industrial nations in the space sector. With further assistance provided by the method of analyzing patent citations, however, it is then possible to discover spin-off effects in areas outside space technology, which are nevertheless closely related in technical terms to the basic space patents with which they are associated. In this way, it is possible to define areas which are particularly suited to adopt space technologies in earthbound applications. This method of analyzing citations, which in principle is familiar for describing technology transfer within any one technical field, has thus been successfully employed for the first time for analyzing spin-offs.

Does multi-functionality affect technical efficiency? A non-parametric analysis of the Scottish dairy industry.

PubMed

Barnes, A P

2006-09-01

Recent policy changes within the Common Agricultural Policy have led to a shift from a solely production-led agriculture towards the promotion of multi-functionality. Conversely, the removal of production-led supports would indicate that an increased concentration on production efficiencies would seem a critical strategy for a country's future competitiveness. This paper explores the relationship between the 'multi-functional' farming attitude desired by policy makers and its effect on technical efficiency within Scottish dairy farming. Technical efficiency scores are calculated by applying the non-parametric data envelopment analysis technique and then measured against causes of inefficiency. Amongst these explanatory factors is a constructed score of multi-functionality. This research finds that, amongst other factors, a multi-functional attitude has a significant positive effect on technical efficiency. Consequently, this seems to validate the promotion of a multi-functional approach to farming currently being championed by policy-makers.

Keys of Japanese Prosody and Didactical-Technical Analysis of OJAD (Online Japanese Accent Dictionary)

ERIC Educational Resources Information Center

Delgado Algarra, Emilio José

2016-01-01

Most of the studies focus on the teaching of foreign languages indicate that little attention is paid to the prosodic features both didactic materials and teaching-learning processes (Martinsen, Avord and Tanner, 2014). In this context and throughout this article, an analysis of the didactical and technical dimensions of OJAD (Japanese Accent…

Physiological and Technical-tactical Analysis in Brazilian Jiu-jitsu Competition

PubMed Central

Andreato, Leonardo V.; Franchini, Emerson; de Moraes, Solange M.F.; Pastório, Juliana J.; da Silva, Danilo F.; Esteves, João V.D.C; Branco, Braulio H.M.; Romero, Paulo V.dS.; Machado, Fabiana A.

2013-01-01

Purpose The present study aims at investigating the physiological response and technical-tactical parameters in Brazilian jiu-jitsu competition. Methods The study included 35 male Brazilian jiu-jitsu athletes (adult category, body mass: 80.2 ± 13.0 kg), graded from white to brown belt, during combats fought at regional level. Twenty-two fights were analyzed in terms of technique and time structure. Blood glucose, lactate and maximal isometric grip strength were determined before and after the fights. The rate of perceived exertion was also assessed after the fight, using the 6-20 Borg rating. The fights were recorded and the following variables were determined: the exertion/pause ratio and subjective intensity of actions, categorized between low and high intensity. Results The results indicated that during Brazilian jiu-jitsu fights, the glycolytic pathway is only moderately activated (lactate before: 4.4 (4.0 – 4.6) mmol/L, after: 10.1 (8.0 – 11.3) mmol/L; glucose before: 112.4 ± 22.3 mg/dL, after: 130.5 ± 31.0 mg/dL). The exertion during the fight resulted in significant reductions in handgrip strength (right hand grip before: 45.9 ± 10.3 kgf, after: 40.1 ± 9.5 kgf; left hand grip before: 44.2 ± 11.1 kgf, after: 37.0 ± 10.2 kgf). The athletes rated the fight as hard: 15 (13 – 15). Effort/pause ratio was 6:1, while high-intensity actions lasted approximately 4 s, resulting in a low/high intensity? ratio of 8:1. Conclusion It is recommended that coaches direct the training loads to simulate the energy demand imposed by the competitive matches, activating moderately the glycolytic pathway. Moreover, the time structure of combats can be used to prescribe both physical and technical-tactical training. PMID:23802056

Physiological and Technical-tactical Analysis in Brazilian Jiu-jitsu Competition.

PubMed

Andreato, Leonardo V; Franchini, Emerson; de Moraes, Solange M F; Pastório, Juliana J; da Silva, Danilo F; Esteves, João V D C; Branco, Braulio H M; Romero, Paulo V Ds; Machado, Fabiana A

2013-06-01

The present study aims at investigating the physiological response and technical-tactical parameters in Brazilian jiu-jitsu competition. The study included 35 male Brazilian jiu-jitsu athletes (adult category, body mass: 80.2 ± 13.0 kg), graded from white to brown belt, during combats fought at regional level. Twenty-two fights were analyzed in terms of technique and time structure. Blood glucose, lactate and maximal isometric grip strength were determined before and after the fights. The rate of perceived exertion was also assessed after the fight, using the 6-20 Borg rating. The fights were recorded and the following variables were determined: the exertion/pause ratio and subjective intensity of actions, categorized between low and high intensity. The results indicated that during Brazilian jiu-jitsu fights, the glycolytic pathway is only moderately activated (lactate before: 4.4 (4.0 - 4.6) mmol/L, after: 10.1 (8.0 - 11.3) mmol/L; glucose before: 112.4 ± 22.3 mg/dL, after: 130.5 ± 31.0 mg/dL). The exertion during the fight resulted in significant reductions in handgrip strength (right hand grip before: 45.9 ± 10.3 kgf, after: 40.1 ± 9.5 kgf; left hand grip before: 44.2 ± 11.1 kgf, after: 37.0 ± 10.2 kgf). The athletes rated the fight as hard: 15 (13 - 15). Effort/pause ratio was 6:1, while high-intensity actions lasted approximately 4 s, resulting in a low/high intensity? ratio of 8:1. It is recommended that coaches direct the training loads to simulate the energy demand imposed by the competitive matches, activating moderately the glycolytic pathway. Moreover, the time structure of combats can be used to prescribe both physical and technical-tactical training.

41 CFR 105-50.001-5 - Specialized or technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., technical tests and evaluations, technical information, training activities, surveys, reports, documents... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Specialized or technical... TECHNICAL SERVICES TO STATE AND LOCAL UNITS OF GOVERNMENT § 105-50.001-5 Specialized or technical services...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical... RESTRICTIONS ON LOBBYING Activities by Own Employees § 146.205 Professional and technical services. (a) The... technical services rendered directly in the preparation, submission, or negotiation of any bid, proposal, or...

Innovative Approaches to Teaching Technical Communication

ERIC Educational Resources Information Center

Bridgeford, Tracy, Ed.; Kitalong, Karla Saari, Ed.; Selfe, Dickie, Ed.

2004-01-01

"Innovative Approaches to Teaching Technical Communication" offers a variety of activities, projects, and approaches to energize pedagogy in technical communication and to provide a constructive critique of current practice. A practical collection, the approaches recommended here are readily adaptable to a range of technological and institutional…

A Preliminary Rhetoric of Technical Copywriting.

ERIC Educational Resources Information Center

Henson, Leigh

1994-01-01

Discusses the rhetorical elements of technical copywriting, including its shared communicative aims with technical writing; authorship considerations such as ethics, education, and professionalism; and the concerns of promotional strategy, audience analysis, choice of media and materials, writing strategy, and style. (SR)

Exercise redox biochemistry: Conceptual, methodological and technical recommendations.

PubMed

Cobley, James N; Close, Graeme L; Bailey, Damian M; Davison, Gareth W

2017-08-01

Exercise redox biochemistry is of considerable interest owing to its translational value in health and disease. However, unaddressed conceptual, methodological and technical issues complicate attempts to unravel how exercise alters redox homeostasis in health and disease. Conceptual issues relate to misunderstandings that arise when the chemical heterogeneity of redox biology is disregarded: which often complicates attempts to use redox-active compounds and assess redox signalling. Further, that oxidised macromolecule adduct levels reflect formation and repair is seldom considered. Methodological and technical issues relate to the use of out-dated assays and/or inappropriate sample preparation techniques that confound biochemical redox analysis. After considering each of the aforementioned issues, we outline how each issue can be resolved and provide a unifying set of recommendations. We specifically recommend that investigators: consider chemical heterogeneity, use redox-active compounds judiciously, abandon flawed assays, carefully prepare samples and assay buffers, consider repair/metabolism, use multiple biomarkers to assess oxidative damage and redox signalling. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Introducing Active Learning Pedagogy into a Technical and Vocational Education and Training Academy in Kurdistan, Iraq

ERIC Educational Resources Information Center

Dickson, Martina; Ladefoged, Svend Erik

2017-01-01

This article focuses on a teaching methodology project which investigated issues of teaching quality at a technical and vocational education and training (TVET) academy in Kurdistan, Northern Iraq. The academy was established in 2012 to provide unemployed youth with TVET, particularly workplace-relevant training. A needs analysis showed that the…

Space shuttle/food system study. Volume 2, Appendix A: Active heating system-screening analysis. Appendix B: Reconstituted food heating techniques analysis

NASA Technical Reports Server (NTRS)

1974-01-01

Technical data are presented which were used to evaluate active heating methods to be incorporated into the space shuttle food system design, and also to evaluate the relative merits and penalties associated with various approaches to the heating of rehydrated food during space flight. Equipment heating candidates were subject to a preliminary screening performed by a selection rationale process which considered the following parameters; (1) gravitational effect; (2) safety; (3) operability; (4) system compatibility; (5) serviceability; (6) crew acceptability; (7) crew time; (8) development risk; and (9) operating cost. A hot air oven, electrically heated food tray, and microwave oven were selected for further consideration and analysis. Passive, semi-active, and active food preparation approaches were also studied in an effort to determine the optimum method for heating rehydrated food. Potential complexity, cost, vehicle impact penalties, and palatability were considered in the analysis. A summary of the study results is provided along with cost estimates for each of the potential sytems

Sniper detection using infrared camera: technical possibilities and limitations

NASA Astrophysics Data System (ADS)

Kastek, M.; Dulski, R.; Trzaskawka, P.; Bieszczad, G.

2010-04-01

The paper discusses technical possibilities to build an effective system for sniper detection using infrared cameras. Descriptions of phenomena which make it possible to detect sniper activities in infrared spectra as well as analysis of physical limitations were performed. Cooled and uncooled detectors were considered. Three phases of sniper activities were taken into consideration: before, during and after the shot. On the basis of experimental data the parameters defining the target were determined which are essential in assessing the capability of infrared camera to detect sniper activity. A sniper body and muzzle flash were analyzed as targets. The simulation of detection ranges was done for the assumed scenario of sniper detection task. The infrared sniper detection system was discussed, capable of fulfilling the requirements. The discussion of the results of analysis and simulations was finally presented.

Iranian nurses' experience of essential technical competences in disaster response: A qualitative content analysis study.

PubMed

Aliakbari, Fatemeh; Bahrami, Masoud; Aein, Fereshteh; Khankeh, Hamidreza

2014-11-01

Today disasters are a part of many people's lives. Iran has a long history of disaster events and nurses are one of the most significant groups within the Iranian disaster relief operations, providing immediate and long-term care for those affected by the disaster. However, the technical competence of Iranian nurses and their training for this work has received little attention. This article presents the results of a study that aims to explore this context. A qualitative study was conducted using in-depth interviews to collect data from 30 nurses, who were deliberately selected from the health centers affiliated to the Isfahan University of Medical Sciences. Themes were identified using the conventional qualitative content analysis. The trustworthiness of the study was supported by considering the auditability, neutrality, consistency, and transferability. The study lasted from 2011 to 2012. Data analysis undertaken for the qualitative study resulted in the identification of five main themes, which included: (1) Management competences, (2) ethical and legal competences, (3) team working, and (4) personal abilities and the specific technical competences presented in this report. This report presents an overview of the nursing technical capabilities required for Iranian nurses during disaster relief. It is argued that additional competencies are required for nurses who care in high-risk situations, including disasters. Nurses need to prepare themselves more effectively to be responsible and effective in nursing care.

OSH technical reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinentmore » to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.« less

Patterns of technical error among surgical malpractice claims: an analysis of strategies to prevent injury to surgical patients.

PubMed

Regenbogen, Scott E; Greenberg, Caprice C; Studdert, David M; Lipsitz, Stuart R; Zinner, Michael J; Gawande, Atul A

2007-11-01

To identify the most prevalent patterns of technical errors in surgery, and evaluate commonly recommended interventions in light of these patterns. The majority of surgical adverse events involve technical errors, but little is known about the nature and causes of these events. We examined characteristics of technical errors and common contributing factors among closed surgical malpractice claims. Surgeon reviewers analyzed 444 randomly sampled surgical malpractice claims from four liability insurers. Among 258 claims in which injuries due to error were detected, 52% (n = 133) involved technical errors. These technical errors were further analyzed with a structured review instrument designed by qualitative content analysis. Forty-nine percent of the technical errors caused permanent disability; an additional 16% resulted in death. Two-thirds (65%) of the technical errors were linked to manual error, 9% to errors in judgment, and 26% to both manual and judgment error. A minority of technical errors involved advanced procedures requiring special training ("index operations"; 16%), surgeons inexperienced with the task (14%), or poorly supervised residents (9%). The majority involved experienced surgeons (73%), and occurred in routine, rather than index, operations (84%). Patient-related complexities-including emergencies, difficult or unexpected anatomy, and previous surgery-contributed to 61% of technical errors, and technology or systems failures contributed to 21%. Most technical errors occur in routine operations with experienced surgeons, under conditions of increased patient complexity or systems failure. Commonly recommended interventions, including restricting high-complexity operations to experienced surgeons, additional training for inexperienced surgeons, and stricter supervision of trainees, are likely to address only a minority of technical errors. Surgical safety research should instead focus on improving decision-making and performance in routine

Test Technical Manual 2014 GED® Test

ERIC Educational Resources Information Center

GED Testing Service, 2014

2014-01-01

This manual was written to provide technical information regarding the General Educational Development (GED®) test as evidence that the GED® test is technically sound. Throughout this manual, documentation is provided regarding the development of the GED® test and data collection activities, as well as evidence of reliability and validity. This…

An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

ERIC Educational Resources Information Center

Chang, Liang-Te; And Others

A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

Advanced transportation system studies technical area 2(TA-2): Heavy lift launch vehicle development. volume 1; Executive summary

NASA Technical Reports Server (NTRS)

McCurry, J.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 1, provides a summary description of the technical activities that were performed over the entire contract duration, covering three distinct launch vehicle definition activities: heavy-lift (300,000 pounds injected mass to low Earth orbit) launch vehicles for the First Lunar Outpost (FLO), medium-lift (50,000-80,000 pounds injected mass to low Earth orbit) launch vehicles, and single-stage-to-orbit (SSTO) launch vehicles (25,000 pounds injected mass to a Space Station orbit).

A Comparative Study of Students Active and Inactive in Extracurricular Activities While Enrolled in Second Year Associate Degree Programs on the Kenosha and Racine Campuses of Gateway Technical Institute, Kenosha, Wisconsin.

ERIC Educational Resources Information Center

Rinck, Lorna Lee

Students at Gateway Technical Institute were surveyed to determine their attitudes toward extracurricular activities, e.g., campus activities, advisors and sponsors, the effect of outside forces on school activities, extended athletic participation by girls in interscholastic sports, administration and faculty, and leadership development. The…

Technical efficiency of Shiraz school of medicine in research and education domains: a data envelopment analysis.

PubMed

Delavari, Somayeh; Rezaee, Rita; Hatam, Nahid; Delavari, Sajad

2016-01-01

Efficiency evaluation of universities and faculties is one of the tools that help managers to identify the departments' strengths and weakness. The main objective of the present research was to measure and compare the technical efficiency of Shiraz school of medicine departments using Data Envelopment Analysis (DEA) technique. This cross-sectional and retrospective study was performed on clinical and non-clinical departments in research and education domains over the period of 2006 to 2011. Different inputs and outputs were considered for research and educational domain separately. Efficiency was measured based on the observed optimal performance. Findings showed that pathology and anatomy departments achieved the score of 100 in technical efficiency in education during 2006 to 2011. During this period, parasitology, psychiatric and pediatrics department's achieved the score of 100 for technical efficiency in research domain. The lowest mean of relative educational efficiency belonged to orthopedic department; as to relative research efficiency, the lowest mean was shown in orthopedics and genetics departments. The mean technical efficiency of non-medical departments in education and research domain was 91.93 and 76.08, respectively, while the mean technical efficiency of the clinical department in educational and research fields was 91.02 and 82.23, respectively. Using multiple input and output in DEA technique provided a comprehensive evaluation of efficiency in Shiraz school of medicine departments. The DEA could successfully estimate the technical efficiency of the departments in research and educational fields. Moreover, the deficiency in each department was found; this could help them to plan for improvement.

Geospatial Analysis of Renewable Energy Technical Potential on Tribal Lands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doris, E.; Lopez, A.; Beckley, D.

2013-02-01

This technical report uses an established geospatial methodology to estimate the technical potential for renewable energy on tribal lands for the purpose of allowing Tribes to prioritize the development of renewable energy resources either for community scale on-tribal land use or for revenue generating electricity sales.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

PubMed

Varabyova, Yauheniya; Schreyögg, Jonas

2013-09-01

There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Task Inventory Construction. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 14.

ERIC Educational Resources Information Center

Kishi, Akemi

To aid in the construction of effective task analysis inventories, this technical report discusses: (1) an optimum questionnaire length that adequately covers Marine tasks without unduly fatiguing respondents; (2) procedures for the phrasing of task statements to avoid ambiguities and be understandable to as broad a range of Marines as is…

Technical communication: Notes toward defining discipline

NASA Technical Reports Server (NTRS)

Rubens, P. M.

1981-01-01

In the field of technical communication, definitions posited in virtually any major text violate every major rule of definitions. The most popular method for defining the field is to state that technical writing is any writing that supports technology or technological activities. There is a need for a nice yardstick for measuring what "technology" is. Some ways in which the field can be defined in a tightly structured empirical way and some implications of technical communication for a humanistic education in a technological age are suggested.

7 CFR 652.6 - Department delivery of technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Department delivery of technical services. 652.6... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.6 Department delivery of technical services. (a) The Department may enter into a...

Artwork as Technics

ERIC Educational Resources Information Center

Jackson, Mark

2016-01-01

"Artwork as technics" opens discussion on activating aesthetics in educational contexts by arguing that we require some fundamental revision in understanding relations between aesthetics and technology in contexts where education is primarily encountered instrumentally and technologically. The paper addresses this through the writing of…

Detection of Frauds and Other Non-technical Losses in Power Utilities using Smart Meters: A Review

NASA Astrophysics Data System (ADS)

Ahmad, Tanveer; Ul Hasan, Qadeer

2016-06-01

Analysis of losses in power distribution system and techniques to mitigate these are two active areas of research especially in energy scarce countries like Pakistan to increase the availability of power without installing new generation. Since total energy losses account for both technical losses (TL) as well as non-technical losses (NTLs). Utility companies in developing countries are incurring of major financial losses due to non-technical losses. NTLs lead to a series of additional losses, such as damage to the network (infrastructure and the reduction of network reliability) etc. The purpose of this paper is to perform an introductory investigation of non-technical losses in power distribution systems. Additionally, analysis of NTLs using consumer energy consumption data with the help of Linear Regression Analysis has been carried out. This data focuses on the Low Voltage (LV) distribution network, which includes: residential, commercial, agricultural and industrial consumers by using the monthly kWh interval data acquired over a period (one month) of time using smart meters. In this research different prevention techniques are also discussed to prevent illegal use of electricity in the distribution of electrical power system.

Exploration studies technical report, FY1988 status. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

1988-01-01

The Office of Exploration (OEXP) at NASA Headquarters has been tasked with defining and recommending alternatives for an early 1990's nationaL decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Lyndon B. Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report, produced by the MASE, describes the process that has been developed in a case study approach. The four case studies developed in FY88 include: (1) Human Expedition to Phobos; (2) Human Expedition to Mars; (3) Lunar Observatory; and (4) Lunar Outpost to Early Mars Evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work.

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic

Outcomes of Technical Variant Liver Transplantation versus Whole Liver Transplantation for Pediatric Patients: A Meta-Analysis.

PubMed

Ye, Hui; Zhao, Qiang; Wang, Yufang; Wang, Dongping; Zheng, Zhouying; Schroder, Paul Michael; Lu, Yao; Kong, Yuan; Liang, Wenhua; Shang, Yushu; Guo, Zhiyong; He, Xiaoshun

2015-01-01

To overcome the shortage of appropriate-sized whole liver grafts for children, technical variant liver transplantation has been practiced for decades. We perform a meta-analysis to compare the survival rates and incidence of surgical complications between pediatric whole liver transplantation and technical variant liver transplantation. To identify relevant studies up to January 2014, we searched PubMed/Medline, Embase, and Cochrane library databases. The primary outcomes measured were patient and graft survival rates, and the secondary outcomes were the incidence of surgical complications. The outcomes were pooled using a fixed-effects model or random-effects model. The one-year, three-year, five-year patient survival rates and one-year, three-year graft survival rates were significantly higher in whole liver transplantation than technical variant liver transplantation (OR = 1.62, 1.90, 1.65, 1.78, and 1.62, respectively, p<0.05). There was no significant difference in five-year graft survival rate between the two groups (OR = 1.47, p = 0.10). The incidence of portal vein thrombosis and biliary complications were significantly lower in the whole liver transplantation group (OR = 0.45 and 0.42, both p<0.05). The incidence of hepatic artery thrombosis was comparable between the two groups (OR = 1.21, p = 0.61). Pediatric whole liver transplantation is associated with better outcomes than technical variant liver transplantation. Continuing efforts should be made to minimize surgical complications to improve the outcomes of technical variant liver transplantation.

Invention and Writing in Technical Work: Representing the Object.

ERIC Educational Resources Information Center

Winsor, Dorothy A.

1994-01-01

Describes the way invention is relevant to the practice of technical writing. Studies three engineering students engaged in a real-world project. Shows how the students' technical work and invention for the final report were simultaneous activities. Claims that invention for and through writing overlaps with technical invention. (HB)

Hierarchical cluster analysis of technical replicates to identify interferents in untargeted mass spectrometry metabolomics.

PubMed

Caesar, Lindsay K; Kvalheim, Olav M; Cech, Nadja B

2018-08-27

Mass spectral data sets often contain experimental artefacts, and data filtering prior to statistical analysis is crucial to extract reliable information. This is particularly true in untargeted metabolomics analyses, where the analyte(s) of interest are not known a priori. It is often assumed that chemical interferents (i.e. solvent contaminants such as plasticizers) are consistent across samples, and can be removed by background subtraction from blank injections. On the contrary, it is shown here that chemical contaminants may vary in abundance across each injection, potentially leading to their misidentification as relevant sample components. With this metabolomics study, we demonstrate the effectiveness of hierarchical cluster analysis (HCA) of replicate injections (technical replicates) as a methodology to identify chemical interferents and reduce their contaminating contribution to metabolomics models. Pools of metabolites with varying complexity were prepared from the botanical Angelica keiskei Koidzumi and spiked with known metabolites. Each set of pools was analyzed in triplicate and at multiple concentrations using ultraperformance liquid chromatography coupled to mass spectrometry (UPLC-MS). Before filtering, HCA failed to cluster replicates in the data sets. To identify contaminant peaks, we developed a filtering process that evaluated the relative peak area variance of each variable within triplicate injections. These interferent peaks were found across all samples, but did not show consistent peak area from injection to injection, even when evaluating the same chemical sample. This filtering process identified 128 ions that appear to originate from the UPLC-MS system. Data sets collected for a high number of pools with comparatively simple chemical composition were highly influenced by these chemical interferents, as were samples that were analyzed at a low concentration. When chemical interferent masses were removed, technical replicates clustered in

An Analysis of Mathematics Course Sequences for Low Achieving Students at a Comprehensive Technical High School

ERIC Educational Resources Information Center

Edge, D. Michael

2011-01-01

This non-experimental study attempted to determine how the different prescribed mathematic tracks offered at a comprehensive technical high school influenced the mathematics performance of low-achieving students on standardized assessments of mathematics achievement. The goal was to provide an analysis of any statistically significant differences…

Optical Science: Deploying Technical Concepts and Engaging Participation through Digital Storytelling

NASA Astrophysics Data System (ADS)

Thomas, R. G.; Berry, K.; Arrigo, J.; Hooper, R. P.

2013-12-01

Technical 'hands-on' training workshops are designed to bring together scientists, technicians, and program managers from universities, government agencies, and the private sector to discuss methods used and advances made in instrumentation and data analysis. Through classroom lectures and discussions combined with a field-day component, hands-on workshop participants get a 'full life cycle' perspective from instrumentation concepts and deployment to data analysis. Using film to document this process is becoming increasingly more popular, allowing scientists to add a story-telling component to their research. With the availability of high-quality and low priced professional video equipment and editing software, scientists are becoming digital storytellers. The science video developed from the 'hands-on' workshop, Optical Water Quality Sensors for Nutrients: Concepts, Deployment, and Analysis, encapsulates the objectives of technical training workshops for participants. Through the use of still photography, video, interviews, and sound, the short video, An Introduction to CUAHSI's Hands-on Workshops, produced by a co-instructor of the workshop acts as a multi-purpose tool. The 10-minute piece provides an overview of workshop field day activities and works to bridge the gap between classroom learning, instrumentation application and data analysis. CUAHSI 'hands-on' technical workshops have been collaboratively executed with faculty from several universities and with the U.S. Geological Survey. The video developed was designed to attract new participants to these professional development workshops, to stimulate a connection with the environment, to act as a workshop legacy resource, and also serve as a guide for prospective hands-on workshop organizers. The effective use of film and short videos in marketing scientific programs, such as technical trainings, allows scientists to visually demonstrate the technologies currently being employed and to provide a more

Analysis of nonintervention studies: technical supplement.

PubMed

Aickin, Mikel

2012-01-01

Methods for analyzing data in nonintervention clinical studies are substantially different from those that are appropriate for randomized clinical trials. Although the latter methods are well known, the former are not. A systematic approach for dealing with statistical confounding in nonintervention research has been developed over the past 30 to 40 years, and the essence of this theory constitutes the contents of this article. An accompanying, less technical article explains the implications of these results for clinical research.

RTO Technical Publications: A Quarterly Listing

NASA Technical Reports Server (NTRS)

2005-01-01

A quarterly listing of RTO technical publications is presented. The topics include: Handbook on the Analysis of Smaller-Scale Contingency Operations in Long Term Defence Planning; 2) Radar Polarimetry and Interferometry; 3) Combat Casualty Care in Ground-Based Tactical Situations: Trauma Technology and Emergency Medical Procedures; and 4) RTO Technical Publications: A Quarterly Listing

Technical Feasibility Assessment of Lunar Base Mission Scenarios

NASA Astrophysics Data System (ADS)

Magelssen, Trygve ``Spike''; Sadeh, Eligar

2005-02-01

Investigation of the literature pertaining to lunar base (LB) missions and the technologies required for LB development has revealed an information gap that hinders technical feasibility assessment. This information gap is the absence of technical readiness levels (TRL) (Mankins, 1995) and information pertaining to the criticality of the critical enabling technologies (CETs) that enable mission success. TRL is a means of identifying technical readiness stages of a technology. Criticality is defined as the level of influence the CET has on the mission scenario. The hypothesis of this research study is that technical feasibility is a function of technical readiness and technical readiness is a function of criticality. A newly developed research analysis method is used to identify the technical feasibility of LB mission scenarios. A Delphi is used to ascertain technical readiness levels and CET criticality-to-mission. The research analysis method is applied to the Delphi results to determine the technical feasibility of the LB mission scenarios that include: observatory, science research, lunar settlement, space exploration gateway, space resource utilization, and space tourism. The CETs identified encompasses four major system level technologies of: transportation, life support, structures, and power systems. Results of the technical feasibility assessment show the observatory and science research LB mission scenarios to be more technical ready out of all the scenarios, but all mission scenarios are in very close proximity to each other in regard to criticality and TRL and no one mission scenario stands out as being absolutely more technically ready than any of the other scenarios. What is significant and of value are the Delphi results concerning CET criticality-to-mission and the TRL values evidenced in the Tables that can be used by anyone assessing the technical feasibility of LB missions.

KSC Technical Capabilities Website

NASA Technical Reports Server (NTRS)

Nufer, Brian; Bursian, Henry; Brown, Laurette L.

2010-01-01

This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

The Relationship among User, Activity and Space of Street Furniture Placed at Kanuni Campus - Karadeniz Technical University

NASA Astrophysics Data System (ADS)

Kurdoğlu, B. C.; Çelik, K. T.; Konakoğlu, S. S. Kurt; Erbaş, Y. S.

2016-10-01

The purpose of this study, 2369 street furniture at the campus mentioned to the thesis study named "Generating a GIS-Based Campus Street Furniture Information System (YEDBIS): Example of Kanuni Campus - Karadeniz Technical University" are to question the harmony statuses of space form, actual activity in space, space size, natural materials used space, usage density of space, surface materials of space, users, and the other of them. The harmony statuses of the street furniture were fixed by observation works and field determinations at the campus. Findings obtained observations were recorded to identification cards by writing "0" value for disharmony, "1" value for partly harmony and "2" value for harmony. Then, the data were analyzed in YEDBIS, which is based on GIS. Then, the data were analyzed in YEDBIS, which is based on GIS, by using ArcMap 10.0 programme. However, due to the absence of web support generated for the YEDBIS, with current data querying and analysis of this data was carried out only in a computer where YEDBIS is located. The results of the analysis indicates that 2369 street furniture were found to be disharmony with space form, with surface materials of space, with natural materials used space and with other street furniture in space, and to be partly harmony actual activity in space, space size, usage density of space and users. Also, the regions and nearby around of the buildings at the campus where were disharmony, partly harmony and harmony of the street furniture were established by using YEDBIS.

Technical Considerations on Scanning and Image Analysis for Amyloid PET in Dementia.

PubMed

Akamatsu, Go; Ohnishi, Akihito; Aita, Kazuki; Ikari, Yasuhiko; Yamamoto, Yasuji; Senda, Michio

2017-01-01

Brain imaging techniques, such as computed tomography (CT), magnetic resonance imaging (MRI), single photon emission computed tomography (SPECT), and positron emission tomography (PET), can provide essential and objective information for the early and differential diagnosis of dementia. Amyloid PET is especially useful to evaluate the amyloid-β pathological process as a biomarker of Alzheimer's disease. This article reviews critical points about technical considerations on the scanning and image analysis methods for amyloid PET. Each amyloid PET agent has its own proper administration instructions and recommended uptake time, scan duration, and the method of image display and interpretation. In addition, we have introduced general scanning information, including subject positioning, reconstruction parameters, and quantitative and statistical image analysis. We believe that this article could make amyloid PET a more reliable tool in clinical study and practice.

Marketing information: The technical report as product

NASA Technical Reports Server (NTRS)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

Technical Data to Justify Full Burnup Credit in Criticality Safety Licensing Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enercon Services, Inc.

2011-03-14

Enercon Services, Inc. (ENERCON) was requested under Task Order No.2 to identify scientific and technical data needed to benchmark and justify Full Burnup Credit, which adds 16 fission products and 4 minor actinides1 to Actinide-Only burnup credit. The historical perspective for Full Burnup Credit is discussed, and interviews of organizations participating in burnup credit activities are summarized as a basis for identifying additional data needs and making recommendation. Input from burnup credit participants representing two segments of the commercial nuclear industry is provided. First, the Electric Power Research Institute (EPRI) has been very active in the development of Full Burnupmore » Credit, representing the interests of nuclear utilities in achieving capacity gains for storage and transport casks. EPRI and its utility customers are interested in a swift resolution of the validation issues that are delaying the implementation of Full Burnup Credit [EPRI 2010b]. Second, used nuclear fuel storage and transportation Cask Vendors favor improving burnup credit beyond Actinide-Only burnup credit, although their discussion of specific burnup credit achievements and data needs was limited citing business sensitive and technical proprietary concerns. While Cask Vendor proprietary items are not specifically identified in this report, the needs of all nuclear industry participants are reflected in the conclusions and recommendations of this report. In addition, Oak Ridge National Laboratory (ORNL) and Sandia National Laboratory (SNL) were interviewed for their input into additional data needs to achieve Full Burnup Credit. ORNL was very open to discussions of Full Burnup Credit, with several telecoms and a visit by ENERCON to ORNL. For many years, ORNL has provided extensive support to the NRC regarding burnup credit in all of its forms. Discussions with ORNL focused on potential resolutions to the validation issues for the use of fission products. SNL was helpful

Vehicle Integrated Performance Analysis, the VIPA Experience: Reconnecting with Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, David S.

2005-01-01

Today's NASA is facing significant challenges and changes. The Exploration initiative indicates a large increase in projects with limited increase in budget. The Columbia report has criticized NASA for its lack of insight and technical integration impacting its ability to provide safety. The Aldridge report is advocating NASA find new ways of doing business. Very early in the Space Launch Initiative (SLI) program a small team of engineers at MSFC were asked to propose a process for performing a system level assessment of a launch vehicle. The request was aimed primarily at providing insight and making NASA a "smart buyer." Out of this effort the VIPA team was created. The difference between the VIPA effort and many integration attempts is that VIPA focuses on using experienced people from various disciplines and a process which focuses them on a technically integrated assessment. Most previous attempts have focused on developing an all encompassing software tool. In addition, VIPA anchored its process formulation in the experience of its members and in early developmental Space Shuttle experience. The primary reference for this is NASA-TP-2001-210092, "Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned," and discussions with its authors. The foundations of VIPA's process are described. The VIPA team also recognized the need to drive detailed analysis earlier in the design process. Analyses and techniques typically done in later design phases, are brought forward using improved computing technology. The intent is to allow the identification of significant sensitivities, trades, and design issues much earlier in the program. This process is driven by the T-model for Technical Integration described in the aforementioned reference. VIPA's approach to performing system level technical integration is discussed in detail. Proposed definitions are offered to clarify this discussion and the general systems integration dialog. VIPA

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed Central

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-01-01

Background Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. Methods In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the ‘Anaesthetists’ Non-technical Skill’ score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Results Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI −0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

PubMed

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

Care networking: a study of technical mediations in a home telecare service.

PubMed

Correa, Gonzalo; Domènech, Miquel

2013-07-22

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor-network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships.

Technical Training in the MNCs in Malaysia: A Case Study Analysis of the Petrochemical Industry

ERIC Educational Resources Information Center

Hooi, Lai Wan

2010-01-01

Purpose: The aim of this paper is to gain insight into some of the types of training and development practices that are carried out in the chemical industry for technical workers. A salient focus of the study is to make a comparative analysis of four MNCs, which were selected based on equity ownership, to ascertain whether T&D practices are…

7 CFR 653.4 - Availability of technical standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Availability of technical standards. 653.4 Section 653.4 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.4 Availability of...

TWRS technical baseline database manager definition document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Acree, C.D.

1997-08-13

This document serves as a guide for using the TWRS Technical Baseline Database Management Systems Engineering (SE) support tool in performing SE activities for the Tank Waste Remediation System (TWRS). This document will provide a consistent interpretation of the relationships between the TWRS Technical Baseline Database Management software and the present TWRS SE practices. The Database Manager currently utilized is the RDD-1000 System manufactured by the Ascent Logic Corporation. In other documents, the term RDD-1000 may be used interchangeably with TWRS Technical Baseline Database Manager.

FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

FHWA vehicle crash analysis conference proceedings : technical summary

DOT National Transportation Integrated Search

1997-04-01

This technical summary announces the publication of conference proceedings as a Federal Highway Administration (FHWA) report (FHWA-RD-96-212) of the same title. The report represents a compilation of seven research papers presented at The FHWA Veh...

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

ERLN Technical Support for Labs

EPA Pesticide Factsheets

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

Flight Dynamics Analysis Branch 2005 Technical Highlights

NASA Technical Reports Server (NTRS)

2005-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 595, in support of flight projects and technology development initiatives in Fiscal Year (FY) 2005. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics including spacecraft navigation (autonomous and ground based); spacecraft trajectory design and maneuver planning; attitude analysis; attitude determination and sensor calibration; and attitude control subsystem (ACS) analysis and design. The FDAB currently provides support for missions and technology development projects involving NASA, other government agencies, academia, and private industry.

Technical Assistance | NREL

Science.gov Websites

Multi-Wind Heat Smart Grid Project. Advancing Energy Solutions in Alaska NREL provides analysis mission to transfer knowledge and innovation to solve the nation's energy challenges. The goal of this transportation energy efficiency and reduce transportation energy costs State Technical Assistance-solar market

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Professional and technical services. 20.300 Section 20.300 Transportation Office of the Secretary of Transportation NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 20.300 Professional and technical services. (a) The prohibition on...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 138.300 Section 138.300 Foreign Relations DEPARTMENT OF STATE MISCELLANEOUS NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 138.300 Professional and technical services. (a) The prohibition on...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Professional and technical services. 20.300 Section 20.300 Transportation Office of the Secretary of Transportation NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 20.300 Professional and technical services. (a) The prohibition on...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 227.300 Section 227.300 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 227.300 Professional and technical services. (a) The prohibition on...

14 CFR 1271.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Professional and technical services. 1271.300 Section 1271.300 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 1271.300 Professional and technical services...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Professional and technical services. 601.300 Section 601.300 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 601.300 Professional and technical services. (a) The prohibition on...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... professional legal services. Similarly, communications with the intent to influence made by an engineer... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Professional and technical services. 712.205... RESTRICTIONS ON LOBBYING Activities by Own Employees § 712.205 Professional and technical services. (a) The...

22 CFR 712.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... lawyer is not providing professional legal services. Similarly, communications with the intent to... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Professional and technical services. 712.300... RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 712.300 Professional and technical services...

Engineering and Technical Education in Russia, in Numbers

ERIC Educational Resources Information Center

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI -0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision

Conceptualising the technical relationship of animal disease surveillance to intervention and mitigation as a basis for economic analysis

PubMed Central

2011-01-01

Background Surveillance and intervention are resource-using activities of strategies to mitigate the unwanted effects of disease. Resources are scarce, and allocating them to disease mitigation instead of other uses necessarily involves the loss of alternative sources of benefit to people. For society to obtain the maximum benefits from using resources, the gains from disease mitigation must be compared to the resource costs, guiding decisions made with the objective of achieving the optimal net outcome. Discussion Economics provides criteria to guide decisions aimed at optimising the net benefits from the use of scarce resources. Assessing the benefits of disease mitigation is no exception. However, the technical complexity of mitigation means that economic evaluation is not straightforward because of the technical relationship of surveillance to intervention. We argue that analysis of the magnitudes and distribution of benefits and costs for any given strategy, and hence the outcome in net terms, requires that mitigation is considered in three conceptually distinct stages. In Stage I, 'sustainment', the mitigation objective is to sustain a free or acceptable status by preventing an increase of a pathogen or eliminating it when it occurs. The role of surveillance is to document that the pathogen remains below a defined threshold, giving early warning of an increase in incidence or other significant changes in risk, and enabling early response. If a pathogen is not contained, the situation needs to be assessed as Stage II, 'investigation'. Here, surveillance obtains critical epidemiological information to decide on the appropriate intervention strategy to reduce or eradicate a disease in Stage III, 'implementation'. Stage III surveillance informs the choice, timing, and scale of interventions and documents the progress of interventions directed at prevalence reduction in the population. Summary This article originates from a research project to develop a conceptual

Research on power market technical analysis index system employing high-low matching mechanism

NASA Astrophysics Data System (ADS)

Li, Tao; Wang, Shengyu

2018-06-01

The power market trading technical analysis refers to a method that takes the bidding behavior of members in the power market as the research object, sums up some typical market rules and price trends by applying mathematical and logical methods, and finally can effectively assist members in the power market to make more reasonable trading decisions. In this paper, the following four indicators have been proposed: bidding price difference scale, extreme bidding price rate, dispersion of bidding price and monthly transaction satisfaction of electricity trading, which are the core of the index system.

Care Networking: A Study of Technical Mediations in a Home Telecare Service

PubMed Central

Correa, Gonzalo; Domènech, Miquel

2013-01-01

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor—network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships. PMID:23880730

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Professional and technical services. 9.15 Section 9.15 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY RESTRICTIONS UPON LOBBYING Activities by Own Employees § 9.15 Professional and technical services. (a) The prohibition on the...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Professional and technical services. 9.23 Section 9.23 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY RESTRICTIONS UPON LOBBYING Activities by Other than Own Employees § 9.23 Professional and technical services. (a) The...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Professional and technical services. 20.205 Section 20.205 Transportation Office of the Secretary of Transportation NEW RESTRICTIONS ON LOBBYING Activities by Own Employees § 20.205 Professional and technical services. (a) The prohibition on the use of...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... professional legal services. Similarly, communications with the intent to influence made by an engineer... 10 Energy 4 2010-01-01 2010-01-01 false Professional and technical services. 601.300 Section 601... Activities by Other Than Own Employees § 601.300 Professional and technical services. (a) The prohibition on...

International Collaboration on Building Local Technical Capacities for Monitoring Volcanic Activity at Pacaya Volcano, Guatemala.

NASA Astrophysics Data System (ADS)

Escobar-Wolf, R. P.; Chigna, G.; Morales, H.; Waite, G. P.; Oommen, T.; Lechner, H. N.

2015-12-01

Pacaya volcano is a frequently active and potentially dangerous volcano situated in the Guatemalan volcanic arc. It is also a National Park and a major touristic attraction, constituting an important economic resource for local municipality and the nearby communities. Recent eruptions have caused fatalities and extensive damage to nearby communities, highlighting the need for risk management and loss reduction from the volcanic activity. Volcanic monitoring at Pacaya is done by the Instituto Nacional de Sismologia, Vulcanologia, Meteorologia e Hidrologia (INSIVUMEH), instrumentally through one short period seismic station, and visually by the Parque Nacional Volcan de Pacaya y Laguna de Calderas (PNVPLC) personnel. We carry out a project to increase the local technical capacities for monitoring volcanic activity at Pacaya. Funding for the project comes from the Society of Exploration Geophysicists through the Geoscientists Without Borders program. Three seismic and continuous GPS stations will be installed at locations within 5 km from the main vent at Pacaya, and one webcam will aid in the visual monitoring tasks. Local educational and outreach components of the project include technical workshops on data monitoring use, and short thesis projects with the San Carlos University in Guatemala. A small permanent exhibit at the PNVPLC museum or visitor center, focusing on the volcano's history, hazards and resources, will also be established as part of the project. The strategy to involve a diverse group of local collaborators in Guatemala aims to increase the chances for long term sustainability of the project, and relies not only on transferring technology but also the "know-how" to make that technology useful. Although not a primary research project, it builds on a relationship of years of joint research projects at Pacaya between the participants, and could be a model of how to increase the broader impacts of such long term collaboration partnerships.

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

NASA Technical Reports Server (NTRS)

1978-01-01

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Professional and technical services. 18.300 Section 18.300 Public Lands: Interior Office of the Secretary of the Interior NEW RESTRICTIONS ON LOBBYING Activities by Other Than Own Employees § 18.300 Professional and technical services. (a) The...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... professional legal services. Similarly, communications with the intent to influence made by an engineer... 10 Energy 4 2010-01-01 2010-01-01 false Professional and technical services. 601.205 Section 601... Activities by Own Employees § 601.205 Professional and technical services. (a) The prohibition on the use of...

Analysis and Evaluation of Technical Data on the Photochromic and Non- Linear Optical Properties of Materials

DTIC Science & Technology

1989-03-01

relatively small contractural effort is to provide technical assistance to Dr. Frank Patten (DARPA) in evaluating data on materials, especially... Musikant , S. (ed.), Advances in Materials for Active Optics, Proceedings of SPIE, Volume 567, SPIE:Washington, 1985. [22] Lewis, Aaron, Del Priore...polysilane," J. Appl. Phys. 60 (1986) 3040-3044. [146] Hache, F., Ricard, D., Flytzanis, C., "Optical nonlinearities of small metal particles: surface

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2002-07

USGS Publications Warehouse

Pearson, D.K.; Gary, R.H.; Wilson, Z.D.

2007-01-01

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is particularly useful when analyzing a wide variety of spatial data such as with remote sensing and spatial analysis. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This document presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup from 2002 through 2007.

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Technical Actions, Heart Rate, and Locomotor Activity in 7v7 and 8v8 Games for Female Youth Soccer Players.

PubMed

Ørntoft, Christina; Larsen, Malte N; Andersen, Thomas B; Rasmussen, Lasse S; Póvoas, Susana C A; Randers, Morten B; Krustrup, Peter

2016-12-01

Ørntoft, C, Larsen, MN, Andersen, TB, Rasmussen, LS, Póvoas, SCA, Randers, MB, and Krustrup, P. Technical actions, heart rate, and locomotor activity in 7v7 and 8v8 games for female youth soccer players. J Strength Cond Res 30(12): 3298-3303, 2016-The purpose of this study was to evaluate technical performance, heart rate (HR), and activity profile in 7v7 and 8v8 soccer games for 9- to 10-year-old girls (U11). A total of 24 female youth players participated in the study, all playing 20-minute 7v7 and 8v8 games with 160 and 223 m per player, respectively. Technical actions, HR, and activity profile were measured during the games using video filming, HR monitors, and 5-Hz Global positioning system (GPS) units. The number of technical actions was higher in 7v7 than in 8v8 games (34 ± 19 vs. 28 ± 14; p = 0.03; d = 0.37), as was the number of successful actions (25 ± 16 vs. 20 ± 12; p = 0.01; d = 0.35), with no difference in success rate for technical actions (70 ± 13 vs. 69 ± 14%; p = 0.63; d = 0.07). No differences were found between 7v7 and 8v8 in total distance covered (1,574 ± 251 and 1,622 ± 281 m; p = 0.66; d = 0.18), peak speed (19.5 ± 2.6 and 20.7 ± 1.5 km·h; p = 0.16; d = 0.56), mean HR values (85 ± 5 and 86 ± 6%HRpeak; p = 0.85; d = 0.18), and time of >90% HRpeak (37 ± 16 and 35 ± 14% of playing time; p = 0.70; d = 0.13). Distance covered at the highest running speeds of >16 km·h was lower in 7v7 than in 8v8 games (34 ± 24 vs. 63 ± 34 m; p = 0.018; d = 0.98), as was the number of entries into this speed zone (8 ± 5 vs. 13 ± 7; p = 0.006; d = 0.82). In conclusion, more technical actions and successful actions were observed in 7v7 than in 8v8 games, but players covered more ground with high-speed running in 8v8 games. This study also revealed that HR values were high in both game formats for U11 adolescent female players, with no difference between formats.

Clinical and technical considerations in the analysis of gingival crevicular fluid.

PubMed

Wassall, Rebecca R; Preshaw, Philip M

2016-02-01

Despite the technical challenges involved when collecting, processing and analyzing gingival crevicular fluid samples, research using gingival crevicular fluid has, and will continue to play, a fundamental role in expanding our understanding of periodontal pathogenesis and healing outcomes following treatment. A review of the literature, however, clearly demonstrates that there is considerable variation in the methods used for collection, processing and analysis of gingival crevicular fluid samples by different research groups around the world. Inconsistent or inadequate reporting impairs interpretation of results, prevents accurate comparison of data between studies and potentially limits the conclusions that can be made from a larger body of evidence. The precise methods used for collection and analysis of gingival crevicular fluid (including calibration studies required before definitive clinical studies) should be reported in detail, either in the methods section of published papers or as an online supplementary file, so that other researchers may reproduce the methodology. Only with clear and transparent reporting will the full impact of future gingival crevicular fluid research be realized. This paper discusses the complexities of gingival crevicular fluid collection and analysis and provides guidance to researchers working in this field. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The 2009 L'Aquila earthquake sequence: technical and scientific activities during the emergency and post-emergency phases

NASA Astrophysics Data System (ADS)

Cardinali, Mauro

2010-05-01

The Central Apennines of Italy is an area characterized by significant seismic activity. In this area, individual earthquakes and prolonged seismic sequences produce a variety of ground effects, including landslides. The L'Aquila area, in the Abruzzo Region, was affected by an earthquake sequence that started on December 2008, and continued for several months. The main shock occurred on April 6, 2009, with local magnitude m = 6.3, and was followed by two separate earthquakes on April 7 and April 9, each with a local magnitude m > 5.0. The main shocks caused 308 fatalities, injured more than 1500 people, and left in excess of 65,000 people homeless. Damage to the cultural heritage was also severe, with tens of churches and historical buildings severely damaged or destroyed. The main shocks and some of the most severe aftershocks triggered landslides, chiefly rock falls and minor rock slides that caused damage to towns, individual houses, and the transportation network. Beginning in the immediate aftermath of the event, and continuing during the emergency and post-emergency phases, we assisted the Italian national Department for Civil Protection in the evaluation of local landslide and hydrological risk conditions. Technical and scientific activities focused on: (i) mapping the location, type, and severity of the main ground effects produced by the earthquake shaking, (ii) evaluating and selecting sites for potential new settlements and individual buildings, including a preliminary assessment of the local geomorphological and hydrological conditions; (iii) evaluating rock fall hazard at individual sites, (iv) monitoring slope and ground deformations, and (v) designing and implementing a prototype system for the forecast of the possible occurrence of rainfall-induced landslides. To execute these activates, we exploited a wide range of methods, techniques, and technologies, and we performed repeated field surveys, the interpretation of ground and aerial photographs

A prescribed wake rotor inflow and flow field prediction analysis, user's manual and technical approach

NASA Technical Reports Server (NTRS)

Egolf, T. A.; Landgrebe, A. J.

1982-01-01

A user's manual is provided which includes the technical approach for the Prescribed Wake Rotor Inflow and Flow Field Prediction Analysis. The analysis is used to provide the rotor wake induced velocities at the rotor blades for use in blade airloads and response analyses and to provide induced velocities at arbitrary field points such as at a tail surface. This analysis calculates the distribution of rotor wake induced velocities based on a prescribed wake model. Section operating conditions are prescribed from blade motion and controls determined by a separate blade response analysis. The analysis represents each blade by a segmented lifting line, and the rotor wake by discrete segmented trailing vortex filaments. Blade loading and circulation distributions are calculated based on blade element strip theory including the local induced velocity predicted by the numerical integration of the Biot-Savart Law applied to the vortex wake model.

A "Virtual Fieldtrip": Service Learning in Distance Education Technical Writing Courses

ERIC Educational Resources Information Center

Soria, Krista M.; Weiner, Brad

2013-01-01

This mixed-methods experimental study examined the effect of service learning in a distance education technical writing course. Quantitative analysis of data found evidence for a positive relationship between participation in service learning and technical writing learning outcomes. Additionally, qualitative analysis suggests that service learning…

INDOT Technical Training Plan : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

A Case Study on the Status of Technical and Vocational Education in Thailand. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Shoolap, Charoon; Choomnoom, Siripan

This two-part report presents an overview of the vocational and technical education system in Thailand. The first part is a review of the current and likely future situations pertaining to vocational and technical education in that country. An analysis of economic conditions, human resource development, and the existing technical and vocational…

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 2:] Technical communications in aeronautics: Results of an exploratory study. An analysis of managers' and nonmanagers' responses

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1989-01-01

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five assumptions were established for the analysis. Aerospace managers and nonmanagers were found to have different technical communications practices for three of the five assumptions tested. Although aerospace managers and nonmanagers were found to have different technical communications practices, the evidence was neither conclusive nor compelling that the presumption of difference in practices could be attributed to the duties performed by aerospace managers and nonmanagers.

Technical efficiency of teaching hospitals in Iran: the use of Stochastic Frontier Analysis, 1999–2011

PubMed Central

Goudarzi, Reza; Pourreza, Abolghasem; Shokoohi, Mostafa; Askari, Roohollah; Mahdavi, Mahdi; Moghri, Javad

2014-01-01

Background: Hospitals are highly resource-dependent settings, which spend a large proportion of healthcare financial resources. The analysis of hospital efficiency can provide insight into how scarce resources are used to create health values. This study examines the Technical Efficiency (TE) of 12 teaching hospitals affiliated with Tehran University of Medical Sciences (TUMS) between 1999 and 2011. Methods: The Stochastic Frontier Analysis (SFA) method was applied to estimate the efficiency of TUMS hospitals. A best function, referred to as output and input parameters, was calculated for the hospitals. Number of medical doctors, nurses, and other personnel, active beds, and outpatient admissions were considered as the input variables and number of inpatient admissions as an output variable. Results: The mean level of TE was 59% (ranging from 22 to 81%). During the study period the efficiency increased from 61 to 71%. Outpatient admission, other personnel and medical doctors significantly and positively affected the production (P< 0.05). Concerning the Constant Return to Scale (CRS), an optimal production scale was found, implying that the productions of the hospitals were approximately constant. Conclusion: Findings of this study show a remarkable waste of resources in the TUMS hospital during the decade considered. This warrants policy-makers and top management in TUMS to consider steps to improve the financial management of the university hospitals. PMID:25114947

A technical review of cellular radio and analysis of a possible protocol

NASA Astrophysics Data System (ADS)

Reese, William D.

1992-09-01

Radio and television technology made the field of cellular radio possible. This thesis shows the development of radio and television technology from both a historical and technical aspect. A review of the important researchers and their contributions is followed by a technical explanation of the theories behind electromagnetic radiation of radio and television signals and the technology which was developed to implement such transmissions. The evolution of development which the paper outlines begins with some of the first theories about electricity and magnetism and the subsequent mathematical foundation developed to explain them. This is followed by a number of experimental and developmental researchers and their contributions. The bulk of the paper is concentrated on explaining the earliest generations of radio and all generations of television. The major components of both radio and television are described in detail along with an explanation of what they do and how they work. Such components, in many cases, found important uses in fields outside those for which they were developed. A brief overview of the regulatory environment of each technology and the U.S. and international standardization efforts is also included. Finally, the paper illustrates a modern-day application of radio technology--the cellular radio industry. A description of the components and their functions is followed by a possible cellular radio protocol and analysis.

International GPS Service 2001 - 2002 Technical Reports

NASA Technical Reports Server (NTRS)

Gowey, Ken (Editor); Neilan, Ruth (Editor); Moore, Angelyn (Editor)

2004-01-01

Applications of the Global Positioning System (GPS) to Earth Science are numerous. The International GPS Service (IGS), a federation of government agencies and universities, plays an increasingly critical role in support of GPS-related research and engineering activities. Contributions from the IGS Governing Board and Central Bureau, analysis and data centers, station operators, and others constitute the 2001 / 2002 Technical Reports. Hard copies of each volume can be obtained by contacting the IGS Central Bureau at the Jet Propulsion Laboratory. This report is published in black and white. To view graphs or plots that use color to represent data trends or information, please refer to the online PDF version at http://igscb.jpl.nasa.gov/overview/pubs.html.

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis.

PubMed

Hernández, Alison R; San Sebastián, Miguel

2014-01-01

Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Data envelopment analysis was used to measure health posts' technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization.

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis

PubMed Central

Hernández, Alison R.; Sebastián, Miguel San

2014-01-01

Introduction Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Methods Data envelopment analysis was used to measure health posts’ technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Results Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Conclusions Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization. PMID:24461356

Atmospheric Research 2011 Technical Highlights

NASA Technical Reports Server (NTRS)

2012-01-01

The 2011 Technical Highlights describes the efforts of all members of Atmospheric Research. Their dedication to advancing Earth Science through conducting research, developing and running models, designing instruments, managing projects, running field campaigns, and numerous other activities, is highlighted in this report.

Progress in Scientific and Technical Communications, 1968 Annual Report.

ERIC Educational Resources Information Center

Federal Council for Science and Technology, Washington, DC. Committee on Scientific and Technical Information.

This sixth annual report describes progress achieved by the Federal Government in improving the communication of scientific and technical information to support and enhance national science and technology. Included in the report are details regarding the scientific and technical activities of individual Federal Agencies, such as the Atomic Energy…

[Retrospective analysis of primary disability among employees of enterprises for the production of technical ceramics].

PubMed

Serebryakov, P V; Khoshtariya, N V; Mustafina, I Z

On the example of588 disability cases registered in employees of the plant for the production of technical ceramics during the 1975-2014 the analysis of the dynamics of illness, gender and age structure of disability indices on the main Origlnarartlcie and auxiliary units of the enterprise was executed for the interval of 10 years periods. There were followed trends in the alteration of the structure of the disability caused by the socio-economic, hygienic and demographic factors.

NASA Technical Management Report (533Q)

NASA Technical Reports Server (NTRS)

Klosko, S. M.; Sanchez, B. (Technical Monitor)

2001-01-01

The objective of this task is analytical support of the NASA Satellite Laser Ranging (SLR) program in the areas of SLR data analysis, software development, assessment of SLR station performance, development of improved models for atmospheric propagation and interpretation of station calibration techniques, and science coordination and analysis functions for the NASA led Central Bureau of the International Laser Ranging Service (ILRS). The contractor shall in each year of the five year contract: (1) Provide software development and analysis support to the NASA SLR program and the ILRS. Attend and make analysis reports at the monthly meetings of the Central Bureau of the ILRS covering data received during the previous period. Provide support to the Analysis Working Group of the ILRS including special tiger teams that are established to handle unique analysis problems. Support the updating of the SLR Bibliography contained on the ILRS web site; (2) Perform special assessments of SLR station performance from available data to determine unique biases and technical problems at the station; (3) Develop improvements to models of atmospheric propagation and for handling pre- and post-pass calibration data provided by global network stations; (4) Provide review presentation of overall ILRS network data results at one major scientific meeting per year; (5) Contribute to and support the publication of NASA SLR and ILRS reports highlighting the results of SLR analysis activity.

Liver CT image processing: a short introduction of the technical elements.

PubMed

Masutani, Y; Uozumi, K; Akahane, Masaaki; Ohtomo, Kuni

2006-05-01

In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed.

Technical Versus Public Spheres: A Feminist Analysis of Women's Rhetoric in the Twilight Sleep Debates of 1914-1916.

PubMed

Johnson, Bethany; Quinlan, Margaret M

2015-01-01

Twilight Sleep (TS) describes the delivery, via an injection, of an amnestic drug cocktail to a parturient woman throughout labor. In order to understand the development of modern-day rhetoric surrounding childbirth methods and procedures, this article explores the debate over TS between the public and technical sphere in New York City between 1914 and 1916 and examines the ways in which this debate altered obstetric health care for middle- and upper-class White women. The public response to this campaign posed a direct challenge to male obstetricians in New York City, many of whom were ill-equipped, both literally and figuratively, to use this procedure. Using a feminist rhetorical criticism, we examined the pro-TS rhetoric of women writers in New York City, the methods they borrowed from the women's movement, and the ensuing dialogue between the public and technical spheres. For this study, we analyzed journal and newspaper articles, a pamphlet, a collection of pro-TS organizational documents, letters to the editor, and books published about TS and the history of birth. Lastly, we analyzed theoretical notions of childbirth in women's health and communication studies. After examining the TS debate, we found that birth practices for middle- and upper-class women in New York City shifted and the obstetric community gained ascendancy over female midwifery. We also found that in certain instances, the rhetoric of pro-TS activists was more technically accurate than the rhetoric of some physicians. Hence the TS debate emerged from an argument over the right to use technical language in the technical and/or the public sphere. Conclusions and implications offered by this historical, feminist analysis question our current understanding of women's health and birthing practices, doctor-patient communication, and patient empowerment and access to technical knowledge.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Technical efficiency of public district hospitals in Madhya Pradesh, India: a data envelopment analysis.

PubMed

Jat, Tej Ram; Sebastian, Miguel San

2013-09-24

Scarcity of resources for healthcare is a well-acknowledged problem. In this context, efficient utilization of existing financial and human resources becomes crucial for strengthening the healthcare delivery. The assessment of efficiency of health facilities can guide decision makers in ensuring the optimum utilization of available resources. The objective of this study was to evaluate the technical efficiency (TE) of the public district hospitals in Madhya Pradesh, India, with special emphasis on maternal healthcare services, using data envelopment analysis (DEA). Data from 40 district hospitals from January to December 2010 were collected from the health management information system and other records of the department of health and family welfare of the state. DEA was performed with input orientation and variable returns to scale assumption. TE and scale efficiency scores of the district hospitals were 0.90 (SD = 0.14) and 0.88 (SD = 0.15), respectively. Of the total district hospitals in the study, 20 (50%) were technically efficient constituting the 'best practice frontier'. The other half were technically inefficient, with an average TE score of 0.79 (SD = 0.12) meaning that these hospitals could produce the same outputs by using 21% less inputs from current input levels. Twenty-six (65%) district hospitals were found to be scale inefficient, manifesting a mean score of 0.81 (SD = 0.16). Half of the district hospitals in the study were operating inefficiently. Decision makers and administrators in the state should identify the causes of the observed inefficiencies and take appropriate measures to increase efficiency of these hospitals.

Benchmark Analysis of Career and Technical Education in Lenawee County. Final Report.

ERIC Educational Resources Information Center

Hollenbeck, Kevin

The career and technical education (CTE) provided in grades K-12 in the county's vocational-technical center and 12 local public school districts of Lenawee County, Michigan, was benchmarked with respect to its attention to career development. Data were collected from the following sources: structured interviews with a number of key respondents…

Technical structure of the global nanoscience and nanotechnology literature

NASA Astrophysics Data System (ADS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-10-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ˜400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Treatment and technical intervention time analysis of a robotic stereotactic radiotherapy system.

PubMed

Crop, F; Lacornerie, T; Szymczak, H; Felin, A; Bailleux, C; Mirabel, X; Lartigau, E

2014-02-01

The purpose of this study is to obtain a better operational knowledge of Stereotactic Body Radiotherapy (SBRT) treatments with CyberKnife(r). An analysis of both In-room Times (IRT) and technical interventions of 5 years of treatments was performed, during which more than 1600 patients were treated for various indications, including liver (21%), lung (29%), intracranial (13%), head and neck (11%) and prostate (7%). Technical interventions were recorded along with the time of the failure, time to the intervention, and the complexity and duration of the repair. Analyses of Time Between Failures (TBF) and Service Disrupting TBF(disr) were performed. Treatment time data and variability per indication and following different system upgrades were evaluated. Large variations of IRTs were found between indications, but also large variations for each indication. The combination of the time reduction Tool (using Iris(r)) and Improved Stop Handling was of major impact to shortening of treatment times. The first implementation of the Iris collimator alone did not lead to significantly shorter IRTs for us except during prostate treatments. This was mostly due to the addition at the same time of larger rotational compensation for prostate treatments (58 instead of 1.58). Significant differences of duration between the first fraction and following fractions of a treatment, representing the necessity of defining imaging parameters and explanation to patients, were found for liver (12 min) and lung treatments using Xsight(r) Spine (5 min). Liver and lung treatments represent the longest IRT's and involve the largest variability's in IRT. The malfunction rate of the system followed a Weibull distribution with the shape and scale parameters of 0.8 and 39.7. Mean TBF(disr) was 68 work hours. 60 to 80% of the service disrupting interventions were resolved within 30-60 min, 5% required external intervention and 30% occurred in the morning. The presented results can be applied in the

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 3: Literature surveys and technical reports

NASA Technical Reports Server (NTRS)

1992-01-01

The technical effort and computer code developed during the first year are summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis.

The Applicability of the ISD 4-Factor Model of Job Analysis in Identifying Task Training Priority in Nine Technical Military Occupational Specialties.

ERIC Educational Resources Information Center

Siebold, Guy L.

Research was conducted to assess the applicability of the Instructional Systems Development (ISD) job analysis procedures to nine technical aviation maintenance military occupational specialties (MOS). Job analysis questionnaires were developed for each of the nine aviation maintenance MOS's. Research teams administered the questionnaires to…

Integrating Science with Technical and Vocational Areas.

ERIC Educational Resources Information Center

Snyder, Larry; Shreckengast, Craig

This guide presents learning activities and lesson plans that integrate science with technical and vocational areas. Activities and plans are organized under broad headings such as Environmental Science and Acid Rain Research; Criminal Justice, Chemistry, and Narcotics; Children's Education and Services; Cosmetology; and Health Professions.…

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

Influence of biological, environmental and technical factors on phenolic content and antioxidant activities of Tunisian halophytes.

PubMed

Ksouri, Riadh; Megdiche, Wided; Falleh, Hanen; Trabelsi, Nejla; Boulaaba, Mondher; Smaoui, Abderrazak; Abdelly, Chedly

2008-11-01

Halophyte ability to withstand salt-triggered oxidative stress is governed by multiple biochemical mechanisms that facilitate retention and/or acquisition of water, protect chloroplast functioning, and maintain ion homeostasis. Most essential traits include the synthesis of osmolytes, specific proteins, and antioxidant molecules. This might explain the utilization of some halophytes as traditional medicinal and dietary plants. The present study aimed at assessing the phenolic content and antioxidant activities of some Tunisian halophytes (Cakile maritima, Limoniastrum monopetalum, Mesembryanthemum crystallinum, M. edule, Salsola kali, and Tamarix gallica), depending on biological (species, organ and developmental stage), environmental, and technical (extraction solvent) factors. The total polyphenol contents and antioxidant activities (DPPH and superoxide radicals scavenging activities, and iron chelating and reducing powers) were strongly affected by the above-cited factors. Such variability might be of great importance in terms of valorising these halophytes as a source of naturally secondary metabolites, and the methods for phenolic and antioxidant production.

The Management of Technical Services--1980.

ERIC Educational Resources Information Center

Rohdy, Margaret A.

1981-01-01

Examines the literature of administration of library technical services from both a library and a management approach, and describes some of the activities of management sections of various library organizations. There are 27 references. (RAA)

Technical Communications in Aeronautics: Results of an Exploratory Study. An Analysis of Profit Managers' and Nonprofit Managers' Responses. NASA Technical Memorandum 101626.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that profit and nonprofit managers in the aerospace community have different technical communications practices. Profit and nonprofit managers were compared in five…

Technical discussions on Emissions and Atmospheric Modeling (TEAM)

NASA Astrophysics Data System (ADS)

Frost, G. J.; Henderson, B.; Lefer, B. L.

2017-12-01

A new informal activity, Technical discussions on Emissions and Atmospheric Modeling (TEAM), aims to improve the scientific understanding of emissions and atmospheric processes by leveraging resources through coordination, communication and collaboration between scientists in the Nation's environmental agencies. TEAM seeks to close information gaps that may be limiting emission inventory development and atmospheric modeling and to help identify related research areas that could benefit from additional coordinated efforts. TEAM is designed around webinars and in-person meetings on particular topics that are intended to facilitate active and sustained informal communications between technical staff at different agencies. The first series of TEAM webinars focuses on emissions of nitrogen oxides, a criteria pollutant impacting human and ecosystem health and a key precursor of ozone and particulate matter. Technical staff at Federal agencies with specific interests in emissions and atmospheric modeling are welcome to participate in TEAM.

Technical skills rotation for general surgery residents.

PubMed

Gonzalez, Ray I; Martinez, Jose M; Iglesias, Alberto R; Lo Menzo, Emanuele; Hutson, Duane; Sleeman, Danny; Livingstone, Alan S; Madan, Atul K

2010-06-15

Technical skills are an important part of any general surgery residency curriculum. With the demands of limited work weeks, it is imperative that educators create novel methods of teaching technical skills to their residents. Our program utilizes a dedicated month to help accomplish this. This study hypothesized that general surgery residents would report a positive effect of a dedicated technical skills rotation. Residents who had undergone a 1 mo rotation in technical skills during their first year were asked to fill out a survey concerning their experience. During the 1-mo rotation, the residents had almost no clinical responsibilities. Teaching of technical skills was performed with various activities, including video content (VC), virtual reality simulators (VR), open foam procedures (OF), laparoscopic box trainers (BT), surgical equipment in-service (SE), and animate sessions (AS). Responses were given on a Likert scale (1-10) with higher numbers being more positive responses. There were seven residents in this study. The residents gave a very positive response to the overall rotation (9.4) and exposure to laparoscopic procedures (9.6). The other responses were enthusiastic as well: exposure to open procedures (8.9) and preparation for operative room (9.4). After their rotation, the residents were comfortable performing a laparoscopic cholecystectomy (9.2), a hand-sewn anastomosis (8.7), and a stapled anastomosis (9.4). The residents found theses activities helpful in increasing order: VC (7.8), VR (8.0), BT (9.0), ES (9.7), OF (9.8), and AS (9.8). A 1-mo dedicated technical skills rotations was perceived to be extremely positive by the residents. The residents felt very comfortable performing a laparoscopic cholecystectomy, a hand-sewn anastomosis, and a stapled anastomosis. With the 80-h work week, alternatives to learning technical skills in the operating room are essential. Further studies need to be performed to determine if this rotation aids in

75 FR 61228 - Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: Technical Lessons Gained From High-Level... Waste Policy Amendments Act of 1987, the U.S. Nuclear Waste Technical Review Board will meet in Dulles... of Energy on technical issues and to review the technical validity of DOE activities related to...

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

EPA Technical Support Centers (TSC): FY14 Lessons ...

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati

Reviews of Data on Science Resources, No. 29. Current and Future Utilization of Scientific and Technical Personnel in Energy-Related Activities.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Div. of Science Resources Studies.

This National Science Foundation (NSF) bulletin summarizes the NSF program of energy manpower studies that assessed the impact of past energy developments and future options for scientific and technical manpower. This document summarizes the utilization of scientific personnel in energy-related activities in private industry in 1975 and shortages…

Comparison of technical and physical activities between 8 vs. 8 and 11 vs. 11 games in young Korean soccer players.

PubMed

Oh, Seong Hwan; Joo, Chang Hwa

2018-04-01

The aims of this study were to examine the differences in technical aspects and physical demands between small-size games (SSG; 8 vs. 8) and regular-size games (RSG; 11 vs. 11) in young Korean soccer players. Seventy-nine young soccer players from 6 teams (U-12) volunteered to participate in the study. The players completed 4 games (2 SSG, 62×51 m, and 2 RSG, 80×54 m) in 2 days. Each game was filmed to evaluate technical actions. Physical demand variables were measured using global positioning system technology. SSG showed significantly greater numbers of technical plays among 17 variables when compared to RSG ( P <0.05). The players covered significantly greater total distance during low-, moderate-, and high-speed running and sprinting in SSG than in RSG ( P <0.05). Higher numbers of high-intensity activities (repeated high-intensity efforts, explosive efforts, decelera-tions, accelerations, and sprinting) were observed in SSG compared to RSG ( P <0.05). Mean heart rate was also higher in SSG than in RSG ( P <0.05). Despite the greater physical demands during SSG, the exercise intensity was similar to that reported in previous studies. Therefore, the SSG format applied in the present study can be a suitable official game format for Korean young soccer players, resulting in significantly greater exposure to technical plays without excessive physical demands.

Comparison of technical and physical activities between 8 vs. 8 and 11 vs. 11 games in young Korean soccer players

PubMed Central

Oh, Seong Hwan; Joo, Chang Hwa

2018-01-01

The aims of this study were to examine the differences in technical aspects and physical demands between small-size games (SSG; 8 vs. 8) and regular-size games (RSG; 11 vs. 11) in young Korean soccer players. Seventy-nine young soccer players from 6 teams (U-12) volunteered to participate in the study. The players completed 4 games (2 SSG, 62×51 m, and 2 RSG, 80×54 m) in 2 days. Each game was filmed to evaluate technical actions. Physical demand variables were measured using global positioning system technology. SSG showed significantly greater numbers of technical plays among 17 variables when compared to RSG (P<0.05). The players covered significantly greater total distance during low−, moderate−, and high-speed running and sprinting in SSG than in RSG (P<0.05). Higher numbers of high-intensity activities (repeated high-intensity efforts, explosive efforts, decelera-tions, accelerations, and sprinting) were observed in SSG compared to RSG (P<0.05). Mean heart rate was also higher in SSG than in RSG (P<0.05). Despite the greater physical demands during SSG, the exercise intensity was similar to that reported in previous studies. Therefore, the SSG format applied in the present study can be a suitable official game format for Korean young soccer players, resulting in significantly greater exposure to technical plays without excessive physical demands. PMID:29740560

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

The Intercultural Component in Textbooks for Teaching a Service Technical Writing Course

ERIC Educational Resources Information Center

Matveeva, Natalia

2007-01-01

This research article investigates new developments in the representation of the intercultural component in textbooks for a service technical writing course. Through textual analysis, using quantitative and qualitative techniques, I report discourse analysis of 15 technical writing textbooks published during 1993-2006. The theoretical and…

The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium. Paper No. 20: Application of the GIFTS-5 Minibased Graphics System for Ship Design and Analysis

DTIC Science & Technology

1979-09-01

Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics System for Ship Design and Analysis U.S...The National Shipbuilding Research Program Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics...MERCHANTABILITY AND/OR FITNESS FOR PURPOSE ARE SPECIFICALLY DISCLAIMED. APPLICATION OF THE GIFTS -5 MINIBASED GRAPHICS SYSTEM FOR SHIP DESIGN AND ANALYSIS Dr

NREL: International Activities - Working with Us

Science.gov Websites

opportunities to develop technology partnerships and researcher-driven collaboration. Technology Partnerships expertise, including our energy analysis capabilities. Researcher-Driven Collaboration NREL scientists formal means, such as collaboration on specific technical topics. NREL researchers also actively

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 3:] Technical communications in aeronautics: Results of an exploratory study. An analysis of profit managers' and nonprofit managers' responses

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1989-01-01

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that profit and nonprofit managers in the aerospace community have different technical communications practices. Five assumptions were established for the analysis. Profit and nonprofit managers in the aerospace community were found to have different technical communications practices for one of the five assumptions tested. It was, therefore, concluded that profit and nonprofit managers in the aerospace community do not have different technical communications practices.

Flight Technical Error Analysis of the SATS Higher Volume Operations Simulation and Flight Experiments

NASA Technical Reports Server (NTRS)

Williams, Daniel M.; Consiglio, Maria C.; Murdoch, Jennifer L.; Adams, Catherine H.

2005-01-01

This paper provides an analysis of Flight Technical Error (FTE) from recent SATS experiments, called the Higher Volume Operations (HVO) Simulation and Flight experiments, which NASA conducted to determine pilot acceptability of the HVO concept for normal operating conditions. Reported are FTE results from simulation and flight experiment data indicating the SATS HVO concept is viable and acceptable to low-time instrument rated pilots when compared with today s system (baseline). Described is the comparative FTE analysis of lateral, vertical, and airspeed deviations from the baseline and SATS HVO experimental flight procedures. Based on FTE analysis, all evaluation subjects, low-time instrument-rated pilots, flew the HVO procedures safely and proficiently in comparison to today s system. In all cases, the results of the flight experiment validated the results of the simulation experiment and confirm the utility of the simulation platform for comparative Human in the Loop (HITL) studies of SATS HVO and Baseline operations.

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...