Vertebral artery origin stent placement with distal protection: technical and clinical results.

PubMed

Qureshi, A I; Kirmani, J F; Harris-Lane, P; Divani, A A; Ahmed, S; Ebrihimi, A; Al Kawi, A; Janjua, N

2006-05-01

To report the feasibility, safety, and 1-month results of performing stent placement for vertebral origin stenosis with the use of a distal protection device. Distal protection devices have been shown to reduce the number of cerebral emboli and subsequent ischemic events when used as adjuncts to percutaneous carotid intervention; however, one case of the use of a distal protection device for vertebral artery has been reported in the literature. We retrospectively determined rates of technical success and 1-month stroke or death associated with stent placement by using distal protection (Filter EX; Boston Scientific, Natick, Mass) in patients with symptomatic vertebral artery origin stenosis. Technical success was defined as successful deployment of distal protection device and stent at target lesion followed by successful retrieval of the device and a final residual stenosis of less than 30%. Other outcomes ascertained included any stroke, death, and semiquantitative assessment of particulate material retained by the filter device. The mean age of the 12 treated patients was 68 years (range, 52-88 years) and the group included 9 men and 3 women. The mean percentage of vertebral artery origin stenosis was 71 +/- 6%. Femoral and radial approaches were used in 9 and 3 cases, respectively. Technical success was achieved in 11 of the 12 patients in whom distal protection device placement was attempted. Postprocedure residual stenosis was 5 +/- 4%. Eight devices held macroscopically visible embolic debris (large and small amounts in 3 and 5 devices, respectively). No stroke or death was observed in the 1-month follow-up. The present study demonstrates the feasibility of performing stent placement for vertebral artery origin stenosis by using a distal protection device. Further studies are required to determine the effectiveness of this approach for vertebral artery origin atherosclerosis.

Laparoscopic resection of transverse colon cancer at splenic flexure: technical aspects and results.

PubMed

Okuda, Junji; Yamamoto, Masashi; Tanaka, Keitaro; Masubuchi, Shinsuke; Uchiyama, Kazuhisa

2016-03-01

Laparoscopic resection of transverse colon cancer at splenic flexure is technical demanding and its efficacy remains controversial. The aim of this study was to investigate its technical aspects such as pitfalls and overcoming them, and to demonstrate the short-term and oncologic long-term outcomes. To overcome the difficulty in laparoscopic resection of transverse colon cancer at splenic flexure, we recognized the following technical tips as essential. First of all, we have to precisely identify major vessels variations feeding tumor. Secondary, anatomical dissection of mesocolon through medial approach is indispensible. Third, safe takedown of splenic flexure to fully mobilization of left hemicolon is mandatory. This cohort study analyzed 95 patients with stage II (43) and III (52) underwent resection of transverse colon cancer at splenic flexure. 61 laparoscopic surgeries (LAC) and 34 conventional open surgeries (OC) from December 1996 to December 2009 were evaluated. Short-term and oncologic long-term outcomes were recorded. Operative time was longer in LAC. However, blood loss was less, recovery of bowel function and hospital stay were shorter in LAC. There was no conversion in LAC and no significant difference in the postoperative complications. Regarding oncologic long-term outcomes, there were no significant differences between OC and LAC. Laparoscopic resection of transverse colon cancer at splenic flexure resulted in acceptable short-term and oncologic long-term outcomes. Once technical tips acquired, laparoscopic resection of transverse colon cancer at splenic flexure could be feasible as minimally invasive surgery.

A Novel Interdisciplinary Approach to Socio-Technical Complexity

NASA Astrophysics Data System (ADS)

Bassetti, Chiara

The chapter presents a novel interdisciplinary approach that integrates micro-sociological analysis into computer-vision and pattern-recognition modeling and algorithms, the purpose being to tackle socio-technical complexity at a systemic yet micro-grounded level. The approach is empirically-grounded and both theoretically- and analytically-driven, yet systemic and multidimensional, semi-supervised and computable, and oriented towards large scale applications. The chapter describes the proposed approach especially as for its sociological foundations, and as applied to the analysis of a particular setting --i.e. sport-spectator crowds. Crowds, better defined as large gatherings, are almost ever-present in our societies, and capturing their dynamics is crucial. From social sciences to public safety management and emergency response, modeling and predicting large gatherings' presence and dynamics, thus possibly preventing critical situations and being able to properly react to them, is fundamental. This is where semi/automated technologies can make the difference. The work presented in this chapter is intended as a scientific step towards such an objective.

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: GUIDANCE DOCUMENT

EPA Science Inventory

NRMRL-CIN-1741 SAIC. Technical Approaches to Characterizing and Cleaning up Brownfields Sites. EPA/625/R/00/009 (NTIS PB2002-105021) , Available: 68-C7-0011. The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the p...

Technical and scale efficiency in public and private Irish nursing homes - a bootstrap DEA approach.

PubMed

Ni Luasa, Shiovan; Dineen, Declan; Zieba, Marta

2016-10-27

This article provides methodological and empirical insights into the estimation of technical efficiency in the nursing home sector. Focusing on long-stay care and using primary data, we examine technical and scale efficiency in 39 public and 73 private Irish nursing homes by applying an input-oriented data envelopment analysis (DEA). We employ robust bootstrap methods to validate our nonparametric DEA scores and to integrate the effects of potential determinants in estimating the efficiencies. Both the homogenous and two-stage double bootstrap procedures are used to obtain confidence intervals for the bias-corrected DEA scores. Importantly, the application of the double bootstrap approach affords true DEA technical efficiency scores after adjusting for the effects of ownership, size, case-mix, and other determinants such as location, and quality. Based on our DEA results for variable returns to scale technology, the average technical efficiency score is 62 %, and the mean scale efficiency is 88 %, with nearly all units operating on the increasing returns to scale part of the production frontier. Moreover, based on the double bootstrap results, Irish nursing homes are less technically efficient, and more scale efficient than the conventional DEA estimates suggest. Regarding the efficiency determinants, in terms of ownership, we find that private facilities are less efficient than the public units. Furthermore, the size of the nursing home has a positive effect, and this reinforces our finding that Irish homes produce at increasing returns to scale. Also, notably, we find that a tendency towards quality improvements can lead to poorer technical efficiency performance.

Robotic transanal endoscopic microsurgery: technical details for the lateral approach.

PubMed

Buchs, Nicolas C; Pugin, François; Volonte, Francesco; Hagen, Monika E; Morel, Philippe; Ris, Frederic

2013-10-01

Transanal endoscopic microsurgery is a minimally invasive approach reserved for the resection of selected rectal tumors. However, this approach is technically demanding. Although robotic technology may overcome the limitations of this approach, the system can be difficult to dock, especially in the lithotomy position. The study aim is thus to report the technical details of robotic transanal endoscopic microsurgery with the use of a lateral approach. This study is a prospective evaluation of robotic transanal endoscopic microsurgery in a single tertiary institution, under a protocol approved by our local ethics committee. Patients underwent a routine mechanical bowel preparation and were placed in the left or right lateral position according to the tumor location. A circular anal dilatator was used together with the glove port technique. The robotic system was then docked over the hip. A 30° optic and 2 articulated instruments were used with an additional assistant trocar. The tumor excision was realized with an atraumatic grasper and an articulated cautery hook, and the defect was closed with barbed continuous stiches in each case. The primary outcome was the safety and feasibility of the procedure. Three patients underwent a robotic transanal endoscopic microsurgery with the use of the lateral approach. Mean operative time was 110 minutes, including 20 minutes for the docking of the robot. There was 1 intraoperative complication (a pneumoperitoneum without intraabdominal lesion) and no postoperative complications. Mean hospital stay was 3 days. Margins were negative in all the cases. The study was limited by the small number of patients. Robotic transanal endoscopic microsurgery with use of the lateral approach is feasible and may facilitate the local resection of small lesions of the mid and lower rectum. It might assume an important place in sphincter-preserving surgery, especially for selected and early rectal cancer (see Video, Supplemental Digital Content 1

Geology of the Terra Cimmeria-Utopia Planitia Highland Lowland Transitional Zone: Final Technical Approach and Scientific Results

NASA Technical Reports Server (NTRS)

Skinner, J. A., Jr.; Tanaka, K. L.

2010-01-01

The southern Utopia highland-lowland transitional zone extends from northern Terra Cimmeria to southern Utopia Planitia and contains broad, bench-like platforms with depressions, pitted cones, tholi, and lobate flows. The locally occurring geologic units and landforms contrast other transitional regions and record a spatially partitioned geologic history. We systematically delineated and described the geologic units and landforms of the southern Utopia-Cimmeria highland-lowland transitional zone for the production of a 1:1,000,000-scale geologic map (MTMs 10237, 15237, 20237, 10242, 15242, 20242, 10247, 15247, and 20247). Herein, we present technical and scientific results of this mapping project.

24 CFR 902.68 - Technical review of results of PHAS physical condition indicator.

Code of Federal Regulations, 2012 CFR

2012-04-01

... physical condition indicator. 902.68 Section 902.68 Housing and Urban Development REGULATIONS RELATING TO... review of results of PHAS physical condition indicator. (a) Request for technical reviews. This section describes the process for requesting and granting technical reviews of physical inspection results. (1) For...

24 CFR 902.68 - Technical review of results of PHAS physical condition indicator.

Code of Federal Regulations, 2014 CFR

2014-04-01

... physical condition indicator. 902.68 Section 902.68 Housing and Urban Development REGULATIONS RELATING TO... review of results of PHAS physical condition indicator. (a) Request for technical reviews. This section describes the process for requesting and granting technical reviews of physical inspection results. (1) For...

24 CFR 902.68 - Technical review of results of PHAS physical condition indicator.

Code of Federal Regulations, 2013 CFR

2013-04-01

... physical condition indicator. 902.68 Section 902.68 Housing and Urban Development REGULATIONS RELATING TO... review of results of PHAS physical condition indicator. (a) Request for technical reviews. This section describes the process for requesting and granting technical reviews of physical inspection results. (1) For...

The far lateral transpontomedullary sulcus approach to pontine cavernous malformations: technical report and surgical results.

PubMed

Abla, Adib A; Benet, Arnau; Lawton, Michael T

2014-09-01

Pontine cavernous malformations (CMs) located on a peripheral pontine surface or the fourth ventricular floor are resectable lesions, but those deep within the pons away from a pial surface are typically observed. However, the anterior bulge of the pons formed by the brachium pontis creates a unique entry point for access to deep pontine lesions from below, working upward through the pontomedullary sulcus. We developed a transpontomedullary sulcus (TPMS) approach to these lesions. The TPMS approach used the far lateral craniotomy and upper vagoaccessory triangle to define the surgical corridor. The entry point was above the olive, lateral to the pyramidal tracts and cranial nerve (CN) VI, above the preolivary sulcus and CN XII, and medial to CNs VII and VIII and CNs IX through XI. Four patients underwent this approach. All presented with hemorrhage and CN VI palsies. All pontine CMs were resected completely. Three patients were improved or unchanged, with good outcomes (modified Rankin Scale score ≤2) in all patients. The central pons remains difficult territory to access, and new surgical corridors are needed. The bulging underbelly of the pons allows access to pontine lesions deep to the pial surface from below. The far lateral TPMS approach is a novel and more direct alternative to the retrosigmoid transmiddle cerebellar peduncle approach. Unlike the retrosigmoid approach, the TPMS approach requires minimal parenchymal transgression and uses a brainstem entry point medial to most lower CNs. Favorable results demonstrate the feasibility of resecting pontine CMs that might have been previously deemed unresectable.

Preferences on technical report format - Results of a survey

NASA Technical Reports Server (NTRS)

Pinelli, T. E.; Cordle, V. M.; Glassman, M.; Vondran, R. F.

1984-01-01

A survey of 513 engineers and scientists employed at the National Aeronautics and Space Administration Langley Research Center and 600 engineers and scientists from three professional/technical societies solicited the opinions of report users concerning the format of NASA technical reports. The results indicate that a summary as well as an abstract should be included, that the definitions of symbols and glossary of terms should be located in the front of the report, and that the illustrative material should be integrated with the text rather than grouped at the end of the report. Citation of references by number, one-column, ragged-right-margin layout, and third-person writing style are also preferred by a majority of the respondents.

24 CFR 902.68 - Technical review of results of PHAS physical condition indicator.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Technical review of results of PHAS physical condition indicator. 902.68 Section 902.68 Housing and Urban Development REGULATIONS RELATING TO... review of results of PHAS physical condition indicator. (a) Request for technical reviews. This section...

Mini-open lateral retroperitoneal lumbar spine approach using psoas muscle retraction technique. Technical report and initial results on six patients.

PubMed

Aghayev, Kamran; Vrionis, Frank D

2013-09-01

The main aim of this paper was to report reproducible method of lumbar spine access via a lateral retroperitoneal route. The authors conducted a retrospective analysis of the technical aspects and clinical outcomes of six patients who underwent lateral multilevel retroperitoneal interbody fusion with psoas muscle retraction technique. The main goal was to develop a simple and reproducible technique to avoid injury to the lumbar plexus. Six patients were operated at 15 levels using psoas muscle retraction technique. All patients reported improvement in back pain and radiculopathy after the surgery. The only procedure-related transient complication was weakness and pain on hip flexion that resolved by the first follow-up visit. Psoas retraction technique is a reliable technique for lateral access to the lumbar spine and may avoid some of the complications related to traditional minimally invasive transpsoas approach.

COMSATCOM service technical baseline strategy development approach using PPBW concept

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.

2016-05-01

This paper presents an innovative approach to develop a Commercial Satellite Communications (COMSATCOM) service Technical Baseline (TB) and associated Program Baseline (PB) strategy using Portable Pool Bandwidth (PPBW) concept. The concept involves trading of the purchased commercial transponders' Bandwidths (BWs) with existing commercial satellites' bandwidths participated in a "designated pool bandwidth"3 according to agreed terms and conditions. Space Missile Systems Center (SMC) has been implementing the Better Buying Power (BBP 3.0) directive4 and recommending the System Program Offices (SPO) to own the Program and Technical Baseline (PTB) [1, 2] for the development of flexible acquisition strategy and achieving affordability and increased in competition. This paper defines and describes the critical PTB parameters and associated requirements that are important to the government SPO for "owning" an affordable COMSATCOM services contract using PPBW trading concept. The paper describes a step-by-step approach to optimally perform the PPBW trading to meet DoD and its stakeholders (i) affordability requirement, and (ii) fixed and variable bandwidth requirements by optimizing communications performance, cost and PPBW accessibility in terms of Quality of Services (QoS), Bandwidth Sharing Ratio (BSR), Committed Information Rate (CIR), Burstable Information Rate (BIR), Transponder equivalent bandwidth (TPE) and transponder Net Presence Value (NPV). The affordable optimal solution that meets variable bandwidth requirements will consider the operating and trading terms and conditions described in the Fair Access Policy (FAP).

Intradural Procedural Time to Assess Technical Difficulty of Superciliary Keyhole and Pterional Approaches for Unruptured Middle Cerebral Artery Aneurysms

PubMed Central

Choi, Yeon-Ju; Son, Wonsoo; Park, Ki-Su

2016-01-01

Objective This study used the intradural procedural time to assess the overall technical difficulty involved in surgically clipping an unruptured middle cerebral artery (MCA) aneurysm via a pterional or superciliary approach. The clinical and radiological variables affecting the intradural procedural time were investigated, and the intradural procedural time compared between a superciliary keyhole approach and a pterional approach. Methods During a 5.5-year period, patients with a single MCA aneurysm were enrolled in this retrospective study. The selection criteria for a superciliary keyhole approach included : 1) maximum diameter of the unruptured MCA aneurysm <15 mm, 2) neck diameter of the MCA aneurysm <10 mm, and 3) aneurysm location involving the sphenoidal or horizontal segment of MCA (M1) segment and MCA bifurcation, excluding aneurysms distal to the MCA genu. Meanwhile, the control comparison group included patients with the same selection criteria as for a superciliary approach, yet who preferred a pterional approach to avoid a postoperative facial wound or due to preoperative skin trouble in the supraorbital area. To determine the variables affecting the intradural procedural time, a multiple regression analysis was performed using such data as the patient age and gender, maximum aneurysm diameter, aneurysm neck diameter, and length of the pre-aneurysm M1 segment. In addition, the intradural procedural times were compared between the superciliary and pterional patient groups, along with the other variables. Results A total of 160 patients underwent a superciliary (n=124) or pterional (n=36) approach for an unruptured MCA aneurysm. In the multiple regression analysis, an increase in the diameter of the aneurysm neck (p<0.001) was identified as a statistically significant factor increasing the intradural procedural time. A Pearson correlation analysis also showed a positive correlation (r=0.340) between the neck diameter and the intradural procedural time

Transperitoneal Laparoscopic Approach to the Perinephric Area in Children: Technical Report and Lessons Learned.

PubMed

Mattioli, Girolamo; Avanzini, Stefano; Pio, Luca; Costanzo, Sara; Faticato, Maria Grazia; Montobbio, Giovanni; Disma, Nicola; Buffa, Piero

2015-10-01

This study presents a technical report of a standardized approach to the perinephric area in a series of pediatric patients, demonstrating that whatever renal or suprarenal surgery is planned, this can be approached and accomplished laparoscopically with an identical or very similar port triangulation, thus facilitating the learning curve within the same surgical team. All patients undergoing renal and adrenal gland surgery with a minimally invasive approach in the period from October 2008 to November 2013 were retrospectively reviewed and included in the study. Technical details and clinical outcomes are described. In total, 68 patients matched the inclusion criteria and were therefore retrospectively examined. No major intraoperative complication occurred. Two patients developed recurrent pelvic-ureteric junction obstruction and were managed with double J stent positioning and laparoscopic dismembered pyeloplasty, respectively. Two patients presenting with adrenal mass experienced a moderate bleeding that could be treated conservatively. Thanks to the reproducibility of the procedure and on the grounds of the presented experience, we support the proposal that the transperitoneal laparoscopic approach to the kidney and the adrenal gland could represent a relatively easy and safe way to quickly achieve confidence and skill in the management of related diseases.

24 CFR 902.68 - Technical review of results of PHAS Indicators #1 or #4.

Code of Federal Regulations, 2010 CFR

2010-04-01

... both reviews, a request for technical review must be submitted in writing to the Director of the Real... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Technical review of results of PHAS... HOUSING AND URBAN DEVELOPMENT PUBLIC HOUSING ASSESSMENT SYSTEM PHAS Scoring § 902.68 Technical review of...

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

NASA Astrophysics Data System (ADS)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Quantifying control effort of biological and technical movements: an information-entropy-based approach.

PubMed

Haeufle, D F B; Günther, M; Wunner, G; Schmitt, S

2014-01-01

In biomechanics and biorobotics, muscles are often associated with reduced movement control effort and simplified control compared to technical actuators. This is based on evidence that the nonlinear muscle properties positively influence movement control. It is, however, open how to quantify the simplicity aspect of control effort and compare it between systems. Physical measures, such as energy consumption, stability, or jerk, have already been applied to compare biological and technical systems. Here a physical measure of control effort based on information entropy is presented. The idea is that control is simpler if a specific movement is generated with less processed sensor information, depending on the control scheme and the physical properties of the systems being compared. By calculating the Shannon information entropy of all sensor signals required for control, an information cost function can be formulated allowing the comparison of models of biological and technical control systems. Exemplarily applied to (bio-)mechanical models of hopping, the method reveals that the required information for generating hopping with a muscle driven by a simple reflex control scheme is only I=32 bits versus I=660 bits with a DC motor and a proportional differential controller. This approach to quantifying control effort captures the simplicity of a control scheme and can be used to compare completely different actuators and control approaches.

Applied tagmemics: A heuristic approach to the use of graphic aids in technical writing

NASA Technical Reports Server (NTRS)

Brownlee, P. P.; Kirtz, M. K.

1981-01-01

In technical report writing, two needs which must be met if reports are to be useable by an audience are the language needs and the technical needs of that particular audience. A heuristic analysis helps to decide the most suitable format for information; that is, whether the information should be presented verbally or visually. The report writing process should be seen as an organic whole which can be divided and subdivided according to the writer's purpose, but which always functions as a totality. The tagmemic heuristic, because it itself follows a process of deconstructing and reconstructing information, lends itself to being a useful approach to the teaching of technical writing. By applying the abstract questions this heuristic asks to specific parts of the report. The language and technical needs of the audience are analyzed by examining the viability of the solution within the givens of the corporate structure, and by deciding which graphic or verbal format will best suit the writer's purpose. By following such a method, answers which are both specific and thorough in their range of application are found.

AgRISTARS. Preliminary technical results review of FY81 experiments, volume 2: Fiscal year 1981/1982 "corn and soybeans pilot" experiment

NASA Technical Reports Server (NTRS)

1981-01-01

The performance of the technology exhibited significant proportion estimation errors, specifically, high mean error in both corn and soybeans area estimation. The data systems, technical approaches, and data assessment of the pilot experiment were reviewed. Results of proportion estimations procedure performance evaluations, and sensitivity evaluations are presented. The role of the pilot experiment in foreign technology development is discussed.

Impact of Research and Technical Change in Wildland Recreation: Evaluation Issues and Approaches

Treesearch

David N. Bengston; Zhi Xu

1993-01-01

The development and diffusion of new technologies have had tremendous impacts on wildland recreation in recent decades. This article examines the potential economic impacts of research and technical change in wildland recreation. Two evaluation models are presented, a cost-price approach and a research intensity model, which are intended to shed some light on the...

The Roles of Technical Communication Researchers in Design Scholarship

ERIC Educational Resources Information Center

Sánchez, Fernando

2017-01-01

Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

A socio-technical approach to improving retail energy efficiency behaviours.

PubMed

Christina, Sian; Waterson, Patrick; Dainty, Andrew; Daniels, Kevin

2015-03-01

In recent years, the UK retail sector has made a significant contribution to societal responses on carbon reduction. We provide a novel and timely examination of environmental sustainability from a systems perspective, exploring how energy-related technologies and strategies are incorporated into organisational life. We use a longitudinal case study approach, looking at behavioural energy efficiency from within one of the UK's leading retailers. Our data covers a two-year period, with qualitative data from a total of 131 participants gathered using phased interviews and focus groups. We introduce an adapted socio-technical framework approach in order to describe an existing organisational behavioural strategy to support retail energy efficiency. Our findings point to crucial socio-technical and goal-setting factors which both impede and/or enable energy efficient behaviours, these include: tensions linked to store level perception of energy management goals; an emphasis on the importance of technology for underpinning change processes; and, the need for feedback and incentives to support the completion of energy-related tasks. We also describe the evolution of a practical operational intervention designed to address issues raised in our findings. Our study provides fresh insights into how sustainable workplace behaviours can be achieved and sustained over time. Secondly, we discuss in detail a set of issues arising from goal conflict in the workplace; these include the development of a practical energy management strategy to facilitate secondary organisational goals through job redesign. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A Tunneled Subcricoid Approach for Anterior Cervical Spine Reoperation: Technical and Safety Results.

PubMed

Winkler, Ethan A; Rowland, Nathan C; Yue, John K; Birk, Harjus; Ozpinar, Alp; Tay, Bobby; Ames, Christopher P; Mummaneni, Praveen V; El-Sayed, Ivan H

2016-02-01

Anterior cervical spine decompression and fusion are common neurosurgical operations. Reoperation of the anterior cervical spine is associated with increased morbidity. The authors describe a novel subcricoid approach to protect the recurrent laryngeal nerve in a cuff of tissue while facilitating surgical access to the anterior cervical spine. Single institution, consecutive case review of 48 patients undergoing reoperation in the anterior cervical region including the level of C5 and below. Univariable and multivariable regression analysis was used to determine predictors of postoperative morbidity. No intraoperative complications were reported. Estimated blood loss for the approach was 13.6 ± 3.1 mL. Nine of 48 patients developed immediate postoperative complications, including vocal cord paresis (10.4%), moderate-to-severe dysphagia (10.4%), and neck edema requiring intubation (2.1%). No postoperative hematomas or death occurred. All complications occurred with 4 or more levels of exposure (1-3 disc levels, 0%, vs. ≥ 4 disc levels, 31%). Extension of the exposure to the upper thoracic spine was associated with odds for postoperative complications (adjusted odds ratio, 6.50; 95% confidence interval, 1.14-37.03) and prolonged hospital stay (adjusted increase 4.23 days, P < 0.01). The tunneled subcricoid approach is a relatively safe corridor to reapproach the anterior cervical spine at the level of C5 and below. However, caution must be exercised when using this approach to expose 4 or more disc levels and with extension of the exposure to the upper thoracic spine. Future comparative studies are needed to establish patient selection criteria in determining the use of this technique compared with classic approaches. Copyright © 2016 Elsevier Inc. All rights reserved.

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

ERIC Educational Resources Information Center

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

Percutaneous endoscopic lumbar discectomy via contralateral approach: a technical case report.

PubMed

Kim, Jin-Sung; Choi, Gun; Lee, Sang-Ho

2011-08-01

Technical case report. The authors report a new percutaneous endoscopic lumbar discectomy (PELD) technique for the treatment of lumbar disc herniation via a contralateral approach. When there are highly down-migrated lumbar disc herniation along just medial to pedicle and narrow ipsilateral intervertebral foramen, the conventional PELD is not easily accessible via ipsilateral transforaminal route. Five patients manifested gluteal and leg pain because of a soft disc herniation at the L4-L5 level. Transforaminal PELD via a contralateral approach was performed to remove the herniated fragment, achieving complete decompression of the nerve root. The symptom was relieved and the patient was discharged the next day. When a conventional transforaminal PELD is difficult because of some anatomical reasons, PELD via a contralateral route could be a good alternative option in selected cases.

An approach to developing independent learning and non-technical skills amongst final year mining engineering students

NASA Astrophysics Data System (ADS)

Knobbs, C. G.; Grayson, D. J.

2012-06-01

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called 'soft' skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to 'soft' skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased.

Technical and Sociological Approaches for Curriculum Innovation on Clothing Education Department

NASA Astrophysics Data System (ADS)

Tristantie, N.

2018-02-01

Education in the context of social and technical development is defined as the main factor in the learning process which is implied into curriculum. It needs to be anticipated responsively how the goals of Clothing Education Department should be achieved. The sociological and technological through curriculum innovation at Clothing Education Department aims to gain good profile of the professional graduates in the future. By using the literature study, it is found out that sociological development and technological approach are the main foundation for sustainability of Clothing Education Department.

Demand, Supply and Results for Secondary Career and Technical Education.

ERIC Educational Resources Information Center

Washington State Workforce Training and Education Coordinating Board, Olympia.

The benefits of offering high school students career and technical education (CTE) in addition to training in basic academic skills and the cost-effectiveness of CTE were examined by reviewing available data on demand, supply, and results for CTE. The analysis confirmed that the market and demand for workers with only a high school education still…

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Roberts, Billy J

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solarmore » photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.« less

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

A unified approach to validation, reliability, and education study design for surgical technical skills training.

PubMed

Sweet, Robert M; Hananel, David; Lawrenz, Frances

2010-02-01

To present modern educational psychology theory and apply these concepts to validity and reliability of surgical skills training and assessment. In a series of cross-disciplinary meetings, we applied a unified approach of behavioral science principles and theory to medical technical skills education given the recent advances in the theories in the field of behavioral psychology and statistics. While validation of the individual simulation tools is important, it is only one piece of a multimodal curriculum that in and of itself deserves examination and study. We propose concurrent validation throughout the design of simulation-based curriculum rather than once it is complete. We embrace the concept that validity and curriculum development are interdependent, ongoing processes that are never truly complete. Individual predictive, construct, content, and face validity aspects should not be considered separately but as interdependent and complementary toward an end application. Such an approach could help guide our acceptance and appropriate application of these exciting new training and assessment tools for technical skills training in medicine.

Technical Subjects in Secondary Schools

ERIC Educational Resources Information Center

Howard, A. E.

2008-01-01

Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

Fox Valley Technical College New Occupational Markets: Market Research Project Results.

ERIC Educational Resources Information Center

Mishler, Carol

This is a report on the results of a market research project conducted by Fox Valley Technical College (FVTC) (Wisconsin) to identify new occupational markets in the college's service area. The college scanned national job lists, employment databases, and northeastern Wisconsin employer advertisements. The college also surveyed employers in the…

A Socio-Technical Approach to Preventing, Mitigating, and Recovering from Ransomware Attacks.

PubMed

Sittig, Dean F; Singh, Hardeep

2016-01-01

Recently there have been several high-profile ransomware attacks involving hospitals around the world. Ransomware is intended to damage or disable a user's computer unless the user makes a payment. Once the attack has been launched, users have three options: 1) try to restore their data from backup; 2) pay the ransom; or 3) lose their data. In this manuscript, we discuss a socio-technical approach to address ransomware and outline four overarching steps that organizations can undertake to secure an electronic health record (EHR) system and the underlying computing infrastructure. First, health IT professionals need to ensure adequate system protection by correctly installing and configuring computers and networks that connect them. Next, the health care organizations need to ensure more reliable system defense by implementing user-focused strategies, including simulation and training on correct and complete use of computers and network applications. Concomitantly, the organization needs to monitor computer and application use continuously in an effort to detect suspicious activities and identify and address security problems before they cause harm. Finally, organizations need to respond adequately to and recover quickly from ransomware attacks and take actions to prevent them in future. We also elaborate on recommendations from other authoritative sources, including the National Institute of Standards and Technology (NIST). Similar to approaches to address other complex socio-technical health IT challenges, the responsibility of preventing, mitigating, and recovering from these attacks is shared between health IT professionals and end-users.

A Socio-Technical Approach to Preventing, Mitigating, and Recovering from Ransomware Attacks

PubMed Central

Singh, Hardeep

2016-01-01

Summary Recently there have been several high-profile ransomware attacks involving hospitals around the world. Ransomware is intended to damage or disable a user’s computer unless the user makes a payment. Once the attack has been launched, users have three options: 1) try to restore their data from backup; 2) pay the ransom; or 3) lose their data. In this manuscript, we discuss a socio-technical approach to address ransomware and outline four overarching steps that organizations can undertake to secure an electronic health record (EHR) system and the underlying computing infrastructure. First, health IT professionals need to ensure adequate system protection by correctly installing and configuring computers and networks that connect them. Next, the health care organizations need to ensure more reliable system defense by implementing user-focused strategies, including simulation and training on correct and complete use of computers and network applications. Concomitantly, the organization needs to monitor computer and application use continuously in an effort to detect suspicious activities and identify and address security problems before they cause harm. Finally, organizations need to respond adequately to and recover quickly from ransomware attacks and take actions to prevent them in future. We also elaborate on recommendations from other authoritative sources, including the National Institute of Standards and Technology (NIST). Similar to approaches to address other complex socio-technical health IT challenges, the responsibility of preventing, mitigating, and recovering from these attacks is shared between health IT professionals and end-users. PMID:27437066

Understanding a technical language: A schema-based approach

NASA Technical Reports Server (NTRS)

Falzon, P.

1984-01-01

Workers in many job categories tend to develop technical languages, which are restricted subjects of natural language. A better knowledge of these retrictions provides guidelines for the design of the restricted languages of interactive systems. Accordingly, a technical language used by air-traffic controllers in their communications with pilots was studied. A method of analysis is presented that allows the schemata underlying each category of messages to be identified. This schematic knowledge was implemented in programs, which assume that the goal-oriented aspect of technical languages (and particularly the restricted domain of discourse) limits the processes and the data necessary in order to understand the messages (monosemy, limited vocabulary, evocation of the schemata by some command words, absence of syntax). The programs can interpret, and translate into sequences of action, the messages emitted by the controllers.

Transradial Approach for Hepatic Radioembolization: Initial Results and Technique.

PubMed

Bishay, Vivian L; Biederman, Derek M; Ward, Thomas J; van der Bom, Imramsjah Martijn J; Patel, Rahul S; Kim, Edward; Nowakowski, Francis S; Lookstein, Robert A; Fischman, Aaron M

2016-11-01

The transradial approach (TRA) has been shown to reduce the morbidity and mortality associated with arterial coronary interventions. Selective internal radiation therapy (SIRT) performed via the TRA can enhance patient comfort, compared with the traditional transfemoral approach (TFA), by allowing immediate ambulation and precluding potential complications associated with the TFA, such as closure device injury or retroperitoneal hematoma. We report our initial experience with and technique for using the TRA for SIRT. Between May 1, 2012, and April 30, 2015, a total of 574 procedures, including planning angiograms (n = 329) and infusions of 90 Y (n = 245), were performed for 318 patients (mean age, 64.5 years). Of the 245 patients who received 90 Y infusions, 52 had SIRT performed with the use of a permanent single-use implant of 90 Y resin microspheres and 193 had SIRT performed with the use of millions of small glass microspheres containing radioactive 90 Y. Procedural details, technical success, the radial artery (RA) occlusion rate noted at 30 days (as assessed via pulse examination), and the major and minor adverse events noted at 30 days were evaluated. Technical success was achieved in 561 of 574 cases (97.7%). The reasons for crossover to use of the TFA included an RA loop (n = 2), RA occlusion (n = 9), and type D response as determined by use of a Barbeau test (n = 2). Patients had undergone between zero and six previous TRA procedures. The mortality rate at 30 days was 0%. Superficial bruising occurred in 13 of 574 cases (2.3%). A grade 2 hematoma that required a second nonocclusive hemostasis cuff occurred in one case. Transient forearm numbness or pain occurred in two of 574 cases. One patient had a transient convulsive event occur after receiving intraarterial infusion of verapamil. RA occlusion occurred in nine of 574 cases (1.6%). Use of the TRA for SIRT is safe, feasible, and well tolerated and is associated with high rates of technical success and

Technical Communications in Aeronautics: Results of an Exploratory Study. NASA Technical Memorandum 101534, Parts 1 and 2.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

An exploratory study investigated technical communications in aeronautics by surveying aeronautical engineers and scientists. The study had five specific objectives: to solicit the opinions of aeronautical engineers and scientists regarding the importance of technical communications to their profession; to determine their use and production of…

Performance Evaluation of Indian Technical Institutions Using PROMETHEE-GAIA Approach

ERIC Educational Resources Information Center

Ranjan, Rajeev; Chakraborty, Shankar

2015-01-01

It has now become an important issue to evaluate the performance of technical institutions to develop better research and enrich the existing teaching processes. The results of such performance appraisal would serve as a reference point for decisions to choose a particular institution, hire manpower, and provide financial support for the…

A Review and Evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of Phase VI-The Technical Report: A Survey and Analysis.

ERIC Educational Resources Information Center

McCullough, Robert A.; And Others

This report presents the results of a review and evaluation of the Langley Research Center's scientific and technical information program, which examined technical reports from various institutions and organizations to determine the organization of reports, the language used to convey information, and the methods used to present information.…

Moving International Technical Communication Forward: A World Englishes Approach

ERIC Educational Resources Information Center

Bokor, Michael Jarvis Kwadzo

2011-01-01

This article explores how the English language contributes to cross-boundary communication failure and establishes that there is an "English language problem" that has not been adequately addressed in preparing United States native English-speaking students for international technical communication tasks. For example, U.S. technical communication…

Identifying Technical Vocabulary

ERIC Educational Resources Information Center

Chung, Teresa Mihwa; Nation, Paul

2004-01-01

This study compared four different approaches to identifying technical words in an anatomy text. The first approach used a four step rating scale, and was used as the comparison for evaluating the other three approaches. It had a high degree of reliability. The least successful approach was that using clues provided by the writer such as labels in…

Advanced Transportation System Studies Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development Contract. Volume 2; Technical Results

NASA Technical Reports Server (NTRS)

1995-01-01

The purpose of the Advanced Transportation System Studies (ATSS) Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is Volume 2 of the final report for the contract. It provides documentation of selected technical results from various TA-2 analysis activities, including a detailed narrative description of the SSTO concept assessment results, a user's guide for the associated SSTO sizing tools, an SSTO turnaround assessment report, an executive summary of the ground operations assessments performed during the first year of the contract, a configuration-independent vehicle health management system requirements report, a copy of all major TA-2 contract presentations, a copy of the FLO launch vehicle final report, and references to Pratt & Whitney's TA-2 sponsored final reports regarding the identification of Russian main propulsion technologies.

Technical Change in the North American Forestry Sector: A Review

Treesearch

Jeffery C. Stier; David N. Bengston

1992-01-01

Economists have examined the impact of technical change on the forest products sector using the historical, index number, and econometric approaches. This paper reviews econometric analyses of the rate and bias of technical change, examining functional form, factors included, and empirical results. Studies are classified as first- second-, or third-generation...

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures

PubMed Central

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-01-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

PubMed

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-02-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of

Endolymphatic Thoracic Duct Stent-Graft Reconstruction for Chylothorax: Approach, Technical Success, Safety, and Short-term Outcomes.

PubMed

Srinivasa, Rajiv N; Chick, Jeffrey Forris Beecham; Hage, Anthony N; Gemmete, Joseph J; Murrey, Douglas C; Srinivasa, Ravi N

2018-04-01

To report approach, technical success, safety, and short-term outcomes of thoracic duct stent-graft reconstruction for the treatment of chylothorax. Two patients, 1 (50%) male and 1 (50%) female, with mean age of 38 years (range: 16-59 years) underwent endolymphatic thoracic duct stent-graft reconstruction between September 2016 and July 2017. Patients had radiographic left-sided chylothoraces (n = 2) from idiopathic causes (n = 1) and heart transplantation (n = 1). In both (100%) patients, antegrade lymphatic access was used to opacify the thoracic duct after which retrograde access was used for thoracic duct stent-graft placement. Pelvic lymphangiography technical success, antegrade cisterna chyli cannulation technical success, thoracic duct opacification technical success, retrograde thoracic duct access technical success, thoracic duct stent-graft reconstruction technical success, ethiodized oil volume, contrast volume, estimated blood loss, procedure time, fluoroscopy time, radiation dose, clinical success, complications, deaths, and follow-up were recorded. Pelvic lymphangiography, antegrade cisterna chyli cannulation, thoracic duct opacification, retrograde thoracic duct access, and thoracic duct stent-graft reconstruction were technically successful in both (100%) patients. Mean ethiodized oil volume was 8 mL (range: 5-10 mL). Mean contrast volume was 13 mL (range: 5-20 mL). Mean estimated blood loss was 13 mL (range: 10-15 mL). Mean fluoroscopy time was 50.4 min (range: 31.2-69.7 min). Mean dose area product and reference air kerma were 954.4 μGmy 2 (range: 701-1,208 μGmy 2 ) and 83.5 mGy (range: 59-108 mGy), respectively. Chylothorax resolved in both (100%) patients. There were no minor or major complications directly related to the procedure. Thoracic duct stent-graft reconstruction may be a technically successful and safe alternative to thoracic duct embolization, disruption, and surgical ligation for the treatment of chylothorax

The composing process in technical communication

NASA Technical Reports Server (NTRS)

Masse, R. E.

1981-01-01

The theory and application of the composing process in technical communications is addressed. The composing process of engineers, some implications for composing research for the teaching and research of technical communication, and an interpretation of the processes as creative experience are also discussed. Two areas of technical communications summarized concern: the rhetorical features of technical communications, and the theoretical background for a process-based view, a problem-solving approach to technical writing.

Technical results and effects of operator experience on uterine artery embolization for fibroids: the Ontario Uterine Fibroid Embolization Trial.

PubMed

Pron, Gaylene; Bennett, John; Common, Andrew; Sniderman, Kenneth; Asch, Murray; Bell, Stuart; Kozak, Roman; Vanderburgh, Leslie; Garvin, Greg; Simons, Martin; Tran, Cuong; Kachura, John

2003-05-01

To document the technical results and spectrum of practice of uterine artery embolization (UAE) for fibroids in the health care setting in Canada. The effects of interventional radiologist's (IR's) experience with UAE on procedure and fluoroscopy time were also investigated. The study involved a multicenter prospective single-arm clinical treatment trial and included the practices of 11 IRs at eight university-affiliated teaching and community hospitals. Vascular access with percutaneous femoral artery approach was followed by transcatheter delivery of polyvinyl alcohol (PVA) particles into uterine arteries with fluoroscopic guidance. Technical success, complications, procedural time, fluoroscopy time, and effects of operator experience were outcomes analyzed. Between November 1998 and November 2000, 570 embolization procedures were performed in 555 patients. UAE was bilaterally successful in 97% (95% CI: 95%-98%). Variant anatomy was the most common reason for failure to embolize bilaterally. The procedural complication rate was 5.3% (95% CI: 3.6%-7.4%). Of the 30 events, three involved major complications (one seizure and two allergic reactions) that resulted in additional care or extended hospital stay. Procedure time and fluoroscopy time averaged 61 minutes (95% CI; 58-63 minutes) and 18.9 minutes (95% CI; 18-19.8) and varied significantly among IRs (P <.001; P <.001). The average 27% reduction in procedure time (20 minutes; P <.001) and 24% reduction in fluoroscopy time (5.1 minutes; P <.001) with increasing UAE experience were significant. A high level of technical success with few complications was obtained with a variety of operators in diverse practice settings. Increased experience in UAE significantly reduced procedure and fluoroscopy time.

Laparoscopic liver resection for posterosuperior tumors using caudal approach and postural changes: A new technical approach.

PubMed

Morise, Zenichi

2016-12-21

Laparoscopic liver resection (LLR) for tumors in the posterosuperior liver [segment (S) 7 and deep S6] is a challenging clinical procedure. This area is located in the bottom of the small subphrenic space (rib cage), with the large and heavy right liver on it when the patient is in the supine position. Thus, LLR of this area is technically demanding because of the handling of the right liver which is necessary to obtain a fine surgical view, secure hemostasis and conduct the resection so as to achieve an appropriate surgical margin in the cage. Handling of the right liver may be performed by the hand-assisted approach, robotic liver resection or by using spacers, such as a sterile glove pouch. In addition, the operative field of posterosuperior resection is in the deep bottom area of the subphrenic cage, with the liver S6 obstructing the laparoscopic caudal view of lesions. The use of intercostal ports facilitates the direct lateral approach into the cage and to the target area, with the combination of mobilization of the liver. Postural changes during the LLR procedure have also been reported to facilitate the LLR for this area, such as left lateral positioning for posterior sectionectomy and semi-prone positioning for tumors in the posterosuperior segments. In our hospital, LLR procedures for posterosuperior tumors are performed via the caudal approach with postural changes. The left lateral position is used for posterior sectionectomy and the semi-prone position is used for S7 segmentectomy and partial resections of S7 and deep S6 without combined intercostal ports insertion. Although the movement of instruments is restricted in the caudal approach, compared to the lateral approach, port placement in the para-vertebra area makes the manipulation feasible and stable, with minimum damage to the environment around the liver.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

PubMed

Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach

PubMed Central

Qin, Yaochen; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention. PMID:28950027

Perihilar Glissonian Approach for Anatomical Parenchymal Sparing Liver Resections: Technical Aspects: The Taping Game.

PubMed

Figueroa, Rodrigo; Laurenzi, Andrea; Laurent, Alexis; Cherqui, Daniel

2018-03-01

To present technical details for central hepatectomy and right anterior and posterior sectionectomies using perihilar Glissonian approach for anatomical delineation and selective inflow occlusion. Central tumors and those deeply located in the right liver may require extensive resections because of their proximity to major vascular structures. In such cases, anatomical more limited resections such as central hepatectomy or sectionectomies may provide an alternative to extensive surgery by assuring both parenchymal sparing and suitable oncologic resection. We present the global concept for performing a perihilar Glissonian approach and its application to each individual anatomical procedure. This includes detailed descriptions, illustrations, and videos demonstrating the technique. This technique was applied since 1991 for anatomical parenchymal resections including central hepatectomy (resection of segments 4, 5, and 8), right anterior sectionectomy (resection of segments 5 and 8), and right posterior sectionectomy (resection of segments 6 and 7). The feasibility rate of the Glissonian approach was 88%. Perihilar Glissonian approach is a safe and reproducible technique that enables anatomical parenchymal preserving liver resections for selected central and right-sided deeply located tumors.

Crusader solid propellant best technical approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graves, V.; Bader, G.; Dolecki, M.

1995-12-01

The goal of the Solid Propellant Resupply Team is to develop Crusader system concepts capable of automatically handling 155mm projectiles and Modular Artillery Charges (MACs) based on system requirements. The system encompasses all aspects of handling from initial input into a resupply vehicle (RSV) to the final loading into the breech of the self-propelled howitzer (SPH). The team, comprised of persons from military and other government organizations, developed concepts for the overall vehicles as well as their interior handling components. An intermediate review was conducted on those components, and revised concepts were completed in May 1995. A concept evaluation wasmore » conducted on the finalized concepts, from both a systems level and a component level. The team`s Best Technical Approach (BTA) concept was selected from that evaluation. Both vehicles in the BTA have a front-engine configuration with the crew situated behind the engine-low in the vehicles. The SPH concept utilizes an automated reload port at the rear of the vehicle, centered high. The RSV transfer boom will dock with this port to allow automated ammunition transfer. The SPH rearm system utilizes fully redundant dual loaders. Active magazines are used for both projectiles and MACs. The SPH also uses a nonconventional tilted ring turret configuration to maximize the available interior volume in the vehicle. This configuration can be rearmed at any elevation angle but only at 0{degree} azimuth. The RSV configuration is similar to that of the SPH. The RSV utilizes passive storage racks with a pick-and-place manipulator for handling the projectiles and active magazines for the MACs. A telescoping transfer boom extends out the front of the vehicle over the crew and engine.« less

Research in Technical Colleges

ERIC Educational Resources Information Center

MacLennan, A.

2008-01-01

Purpose: The purpose of this paper is to list and demonstrate areas in which research needs to be carried out, or questions answered, in order to raise the quality of technical education. Design/methodology/approach: The area of technical education expanded very rapidly in the late 1950s, and there was little comprehensive knowledge regarding the…

Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results

DTIC Science & Technology

1988-09-01

Test and Evaluation Report Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results by .0 Joseph J...PROGRAM PROJECT TASK WORK UNIT Washington, D.C. 20361 ELEMENT NO. NO. NO. ACCESSION NO. OMN 1820 11. TITLE (Include Security Classification) TEST AND...EVALUATION OF THE NAVY TECHNICAL INFORMATION PRESENTATION SYSTEM (NTIPS) F-14A FIELD TEST RESULTS 12. PERSONAL AUTHOR(S) Fuller, Joseph F. (DTRC) Post

A Practical Approach to Early Technical Education

ERIC Educational Resources Information Center

Chijioke, M. O.

1973-01-01

A minimum of technological awareness is essential to Black Africa in its efforts to modernize itself. The young grow up deprived of an environment where they are made to feel at home with gadgets and machines. Elementary technical training and orderly exposure to mathematics are essential to child's education. (EB)

Developing and Validating the Socio-Technical Model in Ontology Engineering

NASA Astrophysics Data System (ADS)

Silalahi, Mesnan; Indra Sensuse, Dana; Giri Sucahyo, Yudho; Fadhilah Akmaliah, Izzah; Rahayu, Puji; Cahyaningsih, Elin

2018-03-01

This paper describes results from an attempt to develop a model in ontology engineering methodology and a way to validate the model. The approach to methodology in ontology engineering is from the point view of socio-technical system theory. Qualitative research synthesis is used to build the model using meta-ethnography. In order to ensure the objectivity of the measurement, inter-rater reliability method was applied using a multi-rater Fleiss Kappa. The results show the accordance of the research output with the diamond model in the socio-technical system theory by evidence of the interdependency of the four socio-technical variables namely people, technology, structure and task.

Getting Personal: Individuality, Innovation, and Technical Communication.

ERIC Educational Resources Information Center

Steiner, Carol J.

1999-01-01

Suggests that effective communication between technical and nontechnical people is difficult because technical communication lacks a personal dimension: technical people give up their identity to be considered competent. Argues that a different approach to communication education for scientists, engineers, and technologists is required to equip…

Technical assistance for law-enforcement communications: Grant summary

NASA Technical Reports Server (NTRS)

Reilly, N. B.

1979-01-01

A summary overview of project activities and results are presented. The goals and objectives are reviewed and a description of the approaches used to attain them is given. The feedback received from the seminars conducted as part of the project, and results from a questionnaire about the project are included. Significant findings of the project in such areas as radio channel loading, dispatch system design, training and technology transfer are discussed. Several specific problem areas are identified and evaluated. Specific recommendations for future technical assistance efforts are presented along with an inventory of technical-assistance reports generated throughout the project.

A Socio-technical Approach for Transient SME Alliances

NASA Astrophysics Data System (ADS)

Rezgui, Yacine

The paper discusses technical requirements to promote the adoption of alliance modes of operation by SMEs in the construction sector. These requirements have provided a basis for specifying a set of functionality to support the collaboration and cooperation needs of SMEs. While service-oriented architectures and semantic web services provide the middleware technology to implement the identified functionality, a number of key technical limitations have been identified, including lack of support for the dynamic and non-functional characteristics of SME alliances distributed business processes, lack of execution monitoring functionality to manage running business processes, and lack of support for semantic reasoning to enable SME business process service composition. The paper examines these issues and provides key directions for supporting SME alliances effectively.

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

PubMed Central

Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

2015-01-01

This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key points The impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level. The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged. PMID:25729299

Principles and Procedures in Technical Assistance: An Approach to Educational Change

ERIC Educational Resources Information Center

Lillie, David L.; Black, Talbot

1976-01-01

The Technical Assistance Development System (TADS) has developed through the years a system for technical assistance and has identified some important principles that should be followed in the operation of organizational support systems. (Author/ER)

Technical Communications in Aeronautics: Results of an Exploratory Study. An Analysis of Managers' and Nonmanagers' Responses. NASA Technical Memorandum 101625.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five secondary assumptions were established for the analysis: (1) that the…

Technical Education and Resource Material.

ERIC Educational Resources Information Center

Mills, Marie T.

New approaches and many technical innovations will be required by the junior college to meet the increasing educational needs of technical occupations. A first is information on which the prospective student can base an intelligent choice of occupation. For this he must have a precise job description to determine whether the career fits his…

TECHNICAL APPROACHES TO CHARACTERIZING AND ...

EPA Pesticide Factsheets

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will need to base assessment and cleanup activities on the conditions of the particular sites with which they are dealing. A site assessment strategy should address: the type and extent of contamination, if any, that is present, the types of data needed to adequately assess the site; appropriate sampling and analytical methods to characterize the contamination; acceptable level of uncertainty and cleanup technologies that contain or treat the types of wastes present.This document includes references to state agency roles including the Voluntary Cleanup Program, public involvement and other guidances that may be used. Information

The National Early Childhood Technical Assistance Center Model for Long-Term Systems Change

ERIC Educational Resources Information Center

Kahn, Lynne; Hurth, Joicey; Kasprzak, Christina M.; Diefendorf, Martha J.; Goode, Susan E.; Ringwalt, Sharon S.

2009-01-01

The National Early Childhood Technical Assistance Center was charged by the U.S. Department of Education's Office of Special Education Programs from October 2001 through September 2006 to develop, implement, and evaluate an approach to technical assistance (TA) that would result in sustainable systems change in state early intervention and…

Glucose Meters: A Review of Technical Challenges to Obtaining Accurate Results

PubMed Central

Tonyushkina, Ksenia; Nichols, James H.

2009-01-01

Glucose meters are universally utilized in the management of hypoglycemic and hyperglycemic disorders in a variety of healthcare settings. Establishing the accuracy of glucose meters, however, is challenging. Glucose meters can only analyze whole blood, and glucose is unstable in whole blood. Technical accuracy is defined as the closeness of agreement between a test result and the true value of that analyte. Truth for glucose is analysis by isotope dilution mass spectrometry, and frozen serum standards analyzed by this method are available from the National Institute of Standards and Technology. Truth for whole blood has not been established, and cells must be separated from the whole blood matrix before analysis by a method like isotope dilution mass spectrometry. Serum cannot be analyzed by glucose meters, and isotope dilution mass spectrometry is not commonly available in most hospitals and diabetes clinics to evaluate glucose meter accuracy. Consensus standards recommend comparing whole blood analysis on a glucose meter against plasma/serum centrifuged from a capillary specimen and analyzed by a clinical laboratory comparative method. Yet capillary samples may not provide sufficient volume to test by both methods, and venous samples may be used as an alternative when differences between venous and capillary blood are considered. There are thus multiple complexities involved in defining technical accuracy and no clear consensus among standards agencies and professional societies on accuracy criteria. Clinicians, however, are more concerned with clinical agreement of the glucose meter with a serum/plasma laboratory result. Acceptance criteria for clinical agreement vary across the range of glucose concentrations and depend on how the result will be used in screening or management of the patient. A variety of factors can affect glucose meter results, including operator technique, environmental exposure, and patient factors, such as medication, oxygen therapy

Anterolateral corridor approach to the infratemporal fossa and central skull base in maxillectomy: rationale and technical aspects.

PubMed

McMahon, Jeremy D; Crowther, John; Taylor, William M; Wong, Ling Siew; Paterson, Tom; Devine, John; Wales, Craig; MacIver, Colin

2015-11-01

We describe the technical aspects and report our clinical experience of a surgical approach to the infratemporal fossa that aims to reduce local recurrence after operations for cancer of the posterior maxilla. We tested the technique by operating on 3 cadavers and then used the approach in 16 patients who had posterolateral maxillectomy for disease that arose on the maxillary alveolus or junction of the hard and soft palate (maxillary group), and in 19 who had resection of the masticatory compartment and central skull base for advanced sinonasal cancer (sinonasal group). Early proximal ligation of the maxillary artery was achieved in all but one of the 35 patients. Access to the infratemporal fossa enabled division of the pterygoid muscles and pterygoid processes under direct vision in all cases. No patient in the maxillary group had local recurrence at median follow up of 36 months. Four patients (21%) in the sinonasal group had local recurrence at median follow up of 27 months. Secondary haemorrhage from the cavernous segment of the internal carotid artery resulted in the only perioperative death. The anterolateral corridor approach enables controlled resection of tumours that extend into the masticatory compartment. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

First Results from BM@N Technical Run with Deuteron Beam

NASA Astrophysics Data System (ADS)

Baranov, D.; Kapishin, M.; Kulish, E.; Maksymchuk, A.; Mamontova, T.; Pokatashkin, G.; Rufanov, I.; Vasendina, V.; Zinchenko, A.

2018-03-01

BM@N (Baryonic Matter at Nuclotron) is the first experiment to be realized at the accelerator complex of NICA-Nuclotron at JINR (Dubna). The aim of the experiment is to study interactions of relativistic heavy ion beams with a kinetic energy from 1 to 4.5 AGeV with fixed targets. The BM@N set-up at the starting phase of the experiment is introduced. First results of the analysis of minimum bias experimental data collected in the technical run in interactions of the deuteron beam of 4 AGeV with different targets are presented. The spacial, momentum and primary vertex resolution of the GEM tracker are studied. The signal of Lambda-hyperon is reconstructed in the proton-pion invariant mass spectrum. The data results are described by Monte Carlo simulations. The investigation has been performed at the Laboratory of High Energy Physics, JINR.

Staff Considerations in Technical Services: The Chameleon Approach.

ERIC Educational Resources Information Center

Foster, Constance L.

1988-01-01

Discusses the need to cope effectively with technological transitions in library technical services and to plan for successful staff development. The areas discussed include changing job skills, financial planning, ergonomics, innovative partnerships, training, and an emphasis on human resources development. (21 references) (Author/CLB)

The role of organisational support in teleworker wellbeing: a socio-technical systems approach.

PubMed

Bentley, T A; Teo, S T T; McLeod, L; Tan, F; Bosua, R; Gloet, M

2016-01-01

The prevalence of telework and other forms of mobile working enabled by digital technology is increasing markedly. Following a socio-technical systems approach, this study aims to examine the role of organisational social support and specific support for teleworkers in influencing teleworker wellbeing, the mediating role of social isolation, potentially resulting from a person-environment mismatch in these relationships, and possible differences in these relationships between low-intensity and hybrid teleworkers. Teleworkers' (n = 804) perceptions of support and telework outcomes (psychological strain, job satisfaction, and social isolation) were collected using an on-line survey of teleworking employees distributed within 28 New Zealand organisations where knowledge work was undertaken. Organisational social support and teleworker support was associated with increased job satisfaction and reduced psychological strain. Social isolation mediated the relationship between organisational social support and the two outcome variables, and some differences were observed in the structural relationships for hybrid and low-intensity teleworker sub-samples. These findings suggest that providing the necessary organisational and teleworker support is important for enhancing the teleworker-environment fit and thereby ensuring desirable telework outcomes. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

A comparison of a technical and a participatory application of social impact assessment.

Treesearch

Dennis R Becker; Charles C Harris; Erik A Nielsen; William J. McLaughlin

2004-01-01

Results of independent applications of a technical and a participatory approach to SIA are compared for an assessment of impacts of the proposed removal of hydroelectric dams to recover threatened and endangered salmon in the Pacific Northwest of the United States. The analysis focuses on empirical differences and similarities between the technical social analysis...

Applying human rights to maternal health: UN Technical Guidance on rights-based approaches.

PubMed

Yamin, Alicia Ely

2013-05-01

In the last few years there have been several critical milestones in acknowledging the centrality of human rights to sustainably addressing the scourge of maternal death and morbidity around the world, including from the United Nations Human Rights Council. In 2012, the Council adopted a resolution welcoming a Technical Guidance on rights-based approaches to maternal mortality and morbidity, and calling for a report on its implementation in 2 years. The present paper provides an overview of the contents and significance of the Guidance. It reviews how the Guidance can assist policymakers in improving women's health and their enjoyment of rights by setting out the implications of adopting a human rights-based approach at each step of the policy cycle, from planning and budgeting, to ensuring implementation, to monitoring and evaluation, to fostering accountability mechanisms. The Guidance should also prove useful to clinicians in understanding rights frameworks as applied to maternal health. Copyright © 2013 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Biasogram: Visualization of Confounding Technical Bias in Gene Expression Data

PubMed Central

Krzystanek, Marcin; Szallasi, Zoltan; Eklund, Aron C.

2013-01-01

Gene expression profiles of clinical cohorts can be used to identify genes that are correlated with a clinical variable of interest such as patient outcome or response to a particular drug. However, expression measurements are susceptible to technical bias caused by variation in extraneous factors such as RNA quality and array hybridization conditions. If such technical bias is correlated with the clinical variable of interest, the likelihood of identifying false positive genes is increased. Here we describe a method to visualize an expression matrix as a projection of all genes onto a plane defined by a clinical variable and a technical nuisance variable. The resulting plot indicates the extent to which each gene is correlated with the clinical variable or the technical variable. We demonstrate this method by applying it to three clinical trial microarray data sets, one of which identified genes that may have been driven by a confounding technical variable. This approach can be used as a quality control step to identify data sets that are likely to yield false positive results. PMID:23613961

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Advances in radio frequency tumor ablation therapy: technical considerations, strategies for increasing coagulation necrosis volume, and preliminary clinical results

NASA Astrophysics Data System (ADS)

Goldberg, S. Nahum; Gazelle, G. Scott

1998-04-01

Radiofrequency (RF) tumor ablation has been demonstrated as a reliable method for creating thermally induced coagulation necrosis using either a percutaneous approach with image- guidance or direct surgical application of thin electrodes into treated tissues. Early clinical trials with this technology have studied the treatment of hepatic, cerebral, and bony malignancies. The extent of coagulation necrosis induced with conventional monopolar radiofrequency electrodes is dependent on overall energy deposition, the duration of RF application, and RF electrode tip length and gauge. This article will discuss these technical considerations with the goal of defining optimal parameters for RF ablation. Strategies to further increase induced coagulation necrosis including: multiprobe and bipolar arrays, and internally-cooled RF electrodes, with or without pulsed-RF or cluster technique will be presented. The development and laboratory results for many of these radiofrequency techniques, initial clinical results, and potential biophysical limitations to RF induced coagulation, such as perfusion mediated tissue cooling (vascular flow) will likewise be discussed.

SWIFT Intensive Technical Assistance Process. Technical Assistance Brief #1

ERIC Educational Resources Information Center

Sailor, Wayne; McCart, Amy; McSheehan, Michael; Mitchiner, Melinda; Quirk, Carol

2014-01-01

The national center on Schoolwide Integrated Framework for Transformation (SWIFT Center) is now approaching the halfway point in its first full year of providing intensive technical assistance (TA) to 68 schools in 20 local educational agencies across five states. The purpose of this brief is to provide a thumbnail sketch of how this TA process…

Approaches to Technological Update of Vocational/Technical Teachers.

ERIC Educational Resources Information Center

Hamilton, James B.; McElroy, Jack

As part of an effort to address the problem of the technological update of vocational and technical teachers, the National Center for Research in Vocational Education conducted a status study to determine the nature and extent of the problem with respect to institutional level and occupational area. A second aspect of the study dealt with…

SADI-S WITH RIGHT GASTRIC ARTERY LIGATION: TECHNICAL SYSTEMATIZATION AND EARLY RESULTS

PubMed Central

GEBELLI, Jordi Pujol; de GORDEJUELA, Amador Garcia Ruiz; RAMOS, Almino Cardoso; NORA, Mario; PEREIRA, Ana Marta; CAMPOS, Josemberg Marins; RAMOS, Manoela Galvão; BASTOS, Eduardo Lemos de Souza; MARCHESINI, João Batista

2016-01-01

ABSTRACT Background: Bariatric surgery is performed all over the world with close to 500.000 procedures per year. The most performed techniques are Roux-en-Y gastric bypass and sleeve gastrectomy. Despite this data, the most effective procedure, biliopancreatic diversion with or without duodenal switch, represents only no more than 1.5% of the procedures. Technical complexity, morbidity, mortality, and severe nutritional adverse effects related to the procedure are the main fears that prevent most universal acceptance. Aim: To explain the technical aspects and the benefits of the SADI-S with right gastric artery ligation as an effective simplification from the original duodenal switch. Methods: Were included all patients undergoing this procedure from the November 2014 to May 2016, describing and analysing aspects of this technique, the systematization and early complications associated with the procedure. Results: A series of 67 patients were operated; 46 were women (68.7%); mean age of the group was 44 years old (33-56); and an average BMI of 53.5 kg/m2 (50-63.5). Surgical time was 115 min (80-180). A total of five patients (7.5%) had any complication and two (2.9%) had to be reoperated. There were two patients with leak, one at the duodenal stump and other at the esophagogastric angle. There was no mortality. Patients stayed at the hospital a median of 2.5 days (1-25). Conclusions: SADI-S with right gastric artery ligation is a safe procedure with few preliminary complications. The technical variations introduced to the classical duodenal switch are reproducible and may allow this procedure to be more popular. All the complications in this series were not related to the ligation of the right gastric artery. PMID:27683784

Teleworking in connection with technical aids for disabled persons.

PubMed

Alimandi, L; Andrich, R; Porqueddu, B

1995-01-01

An experimental teleworking arrangement was established between Milan and Rome in order to evaluate the use of multimedia technology and remote working for improving the service provided by an information and advice centre for the disabled. This activity requires a highly interdisciplinary approach and both clinical and technical expertise. The hypothesis was that offering the lone expert in Rome the possibility of teleconsulting with colleagues in Milan (where the whole range of expertise was available) would provide a comprehensive service for disabled clients asking for advice on technical aids in Rome. The results of an experiment demonstrated the feasibility of such teleworking and allowed a teleconsulting method to be defined that fits the specific needs of the technical-aid information service and improves quality.

Exploration studies technical report, FY1988 status. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

1988-01-01

The Office of Exploration (OEXP) at NASA Headquarters has been tasked with defining and recommending alternatives for an early 1990's nationaL decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Lyndon B. Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report, produced by the MASE, describes the process that has been developed in a case study approach. The four case studies developed in FY88 include: (1) Human Expedition to Phobos; (2) Human Expedition to Mars; (3) Lunar Observatory; and (4) Lunar Outpost to Early Mars Evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work.

An Approach to Tailoring Major Technical Reviews Based on Project Characteristics and Stakeholder Interests

NASA Technical Reports Server (NTRS)

Richstein, Alan B.; Nolte, Jerome T.; Pfarr, Barbara B.

2004-01-01

There are numerous technical reviews that occur throughout the systems engineering process life cycle. Many are well known by project managers and stakeholders such as developers and end users, an example of much is the critical design review (CDR). This major milestone for a large, complex new project may last two or more days, include an extensive agenda of topics, and entail hundreds of hours of developer time to prepare presentation materials and associated documents. Additionally, the weeks of schedule spent on review preparation is at least partly at the expense of other work. This paper suggests an approach for tailoring technical reviews, based on the project characteristics and the project manager s identification of the key stakeholders and understanding of their most important issues and considerations. With this insight the project manager can communicate to, manage expectations oc and establish formal agreement with the stakeholders as to which reviews, and at what depth, are most appropriate to achieve project success. The authors, coming from diverse organizations and backgrounds, have drawn on their personal experiences and summarized the best practices of their own organizations to create a common framework to provide guidance on the adaptation of design reviews to other system engineers.

Shuttle ku-band communications/radar technical concepts

NASA Technical Reports Server (NTRS)

Griffin, J. W.; Kelley, J. S.; Steiner, A. W.; Vang, H. A.; Zrubek, W. E.; Huth, G. K.

1985-01-01

Technical data on the Shuttle Orbiter K sub u-band communications/radar system are presented. The more challenging aspects of the system design and development are emphasized. The technical problems encountered and the advancements made in solving them are discussed. The radar functions are presented first. Requirements and design/implementation approaches are discussed. Advanced features are explained, including Doppler measurement, frequency diversity, multiple pulse repetition frequencies and pulse widths, and multiple modes. The communications functions that are presented include advances made because of the requirements for multiple communications modes. Spread spectrum, quadrature phase shift keying (QPSK), variable bit rates, and other advanced techniques are discussed. Performance results and conclusions reached are outlined.

Engineering Technical Review Planning Briefing

NASA Technical Reports Server (NTRS)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Flow of Scientific and Technical Information: The Results of a Recent Major Investigation.

ERIC Educational Resources Information Center

Goodman, A. F.

Characterized were the scientific and technical information needs of 1,500 scientists and engineers from 73 companies, 8 research institutes, and 2 universities; and the flow of scientific and technical information (flow process) inherent in satisfying these needs. Interviewers asked 63 questions in the subject areas of (1) the user of scientific…

Dual- and Multi-Energy CT: Principles, Technical Approaches, and Clinical Applications

PubMed Central

Leng, Shuai; Yu, Lifeng; Fletcher, Joel G.

2015-01-01

In x-ray computed tomography (CT), materials having different elemental compositions can be represented by identical pixel values on a CT image (ie, CT numbers), depending on the mass density of the material. Thus, the differentiation and classification of different tissue types and contrast agents can be extremely challenging. In dual-energy CT, an additional attenuation measurement is obtained with a second x-ray spectrum (ie, a second “energy”), allowing the differentiation of multiple materials. Alternatively, this allows quantification of the mass density of two or three materials in a mixture with known elemental composition. Recent advances in the use of energy-resolving, photon-counting detectors for CT imaging suggest the ability to acquire data in multiple energy bins, which is expected to further improve the signal-to-noise ratio for material-specific imaging. In this review, the underlying motivation and physical principles of dual- or multi-energy CT are reviewed and each of the current technical approaches is described. In addition, current and evolving clinical applications are introduced. © RSNA, 2015 PMID:26302388

A Risk-Based Approach to Variable Load Configuration Validation in Steam Sterilization: Application of PDA Technical Report 1 Load Equivalence Topic.

PubMed

Pavell, Anthony; Hughes, Keith A

2010-01-01

This article describes a method for achieving the load equivalence model, described in Parenteral Drug Association Technical Report 1, using a mass-based approach. The item and load bracketing approach allows for mixed equipment load size variation for operational flexibility along with decreased time to introduce new items to the operation. The article discusses the utilization of approximately 67 items/components (Table IV) identified for routine sterilization with varying quantities required weekly. The items were assessed for worst-case identification using four temperature-related criteria. The criteria were used to provide a data-based identification of worst-case items, and/or item equivalence, to carry forward into cycle validation using a variable load pattern. The mass approach to maximum load determination was used to bracket routine production use and allows for variable loading patterns. The result of the item mapping and load bracketing data is "a proven acceptable range" of sterilizing conditions including loading configuration and location. The application of these approaches, while initially more time/test-intensive than alternate approaches, provides a method of cycle validation with long-term benefit of ease of ongoing qualification, minimizing time and requirements for new equipment qualification for similar loads/use, and for rapid and rigorous assessment of new items for sterilization.

Technical Communications in Aeronautics: Results of an Exploratory Study. An Analysis of Profit Managers' and Nonprofit Managers' Responses. NASA Technical Memorandum 101626.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that profit and nonprofit managers in the aerospace community have different technical communications practices. Profit and nonprofit managers were compared in five…

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Identification of mine rescue equipment reduction gears technical condition

NASA Astrophysics Data System (ADS)

Gerike, B. L.; Klishin, V. I.; Kuzin, E. G.

2017-09-01

The article presents the reasons for adopting intelligent service of mine belt conveyer drives concerning evaluation of their technical condition based on the diagnostic techniques instead of regular preventative maintenance. The article reveals the diagnostic results of belt conveyer drive reduction gears condition taking into account the parameters of lubricating oil, vibration and temperature. Usage of a complex approach to evaluate technical conditions allows reliability of the forecast to be improved, which makes it possible not only to prevent accidental breakdowns and eliminate unscheduled downtime, but also to bring sufficient economic benefits through reduction of the term and scope of work during overhauls.

A socio-technical systems approach to studying interruptions: understanding the interrupter's perspective.

PubMed

Rivera, A Joy

2014-05-01

The purpose of this study was to understand the cognitive processes underlying nurses' decision to interrupt other nurses. The Institute of Medicine (2000) reported that interruptions are likely contributors to medical errors. Unfortunately, the research to date has been quite homogenous, focusing only on the healthcare provider being interrupted, ignoring the true complexities of interruptions. This study took a socio-technical approach being the first to examine interruptions from the viewpoint of the interrupting nurse. Over 15 h of observations and 10 open-ended interviews with expert nurses in a Neuroscience Surgical Intensive Care Unit were conducted. It was found that nurses conduct a quick cost-benefit assessment to determine the interruptibility of other nurses and whether an interruption is value-added vs. non-value added. To complete the assessment, nurses consider several conditional factors related to the interruptee, the interrupter, and the nature of the interruption content, and different potential consequences of the interruption. Published by Elsevier Ltd.

War-gaming application for future space systems acquisition part 1: program and technical baseline war-gaming modeling and simulation approaches

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.

2017-05-01

This paper describes static Bayesian game models with "Pure" and "Mixed" games for the development of an optimum Program and Technical Baseline (PTB) solution for affordable acquisition of future space systems. The paper discusses System Engineering (SE) frameworks and analytical and simulation modeling approaches for developing the optimum PTB solutions from both the government and contractor perspectives.

New totally intracorporeal reconstructive approach after robotic total gastrectomy: Technical details and short-term outcomes

PubMed Central

Parisi, Amilcare; Ricci, Francesco; Gemini, Alessandro; Trastulli, Stefano; Cirocchi, Roberto; Palazzini, Giorgio; D’Andrea, Vito; Desiderio, Jacopo

2017-01-01

AIM To show outcomes of our series of patients that underwent a total gastrectomy with a robotic approach and highlight the technical details of a proposed solution for the reconstruction phase. METHODS Data of gastrectomies performed from May 2014 to October 2016, were extracted and analyzed. Basic characteristics of patients, surgical and clinical outcomes were reported. The technique for reconstruction (Parisi Technique) consists on a loop of bowel shifted up antecolic to directly perform the esophago-enteric anastomosis followed by a second loop, measured up to 40 cm starting from the esojejunostomy, fixed to the biliary limb to create an enteroenteric anastomosis. The continuity between the two anastomoses is interrupted just firing a linear stapler, so obtaining the Roux-en-Y by avoiding to interrupt the mesentery. RESULTS Fifty-five patients were considered in the present analysis. Estimated blood loss was 126.55 ± 73 mL, no conversions to open surgery occurred, R0 resections were obtained in all cases. Hospital stay was 5 (3-17) d, no anastomotic leakage occurred. Overall, a fast functional recovery was shown with a median of 3 (3-6) d in starting a solid diet. CONCLUSION Robotic surgery and the adoption of a tailored reconstruction technique have increased the feasibility and safety of a minimally invasive approach for total gastrectomy. The present series of patients shows its implementation in a western center with satisfying short-term outcomes. PMID:28694670

Analysis of nonintervention studies: technical supplement.

PubMed

Aickin, Mikel

2012-01-01

Methods for analyzing data in nonintervention clinical studies are substantially different from those that are appropriate for randomized clinical trials. Although the latter methods are well known, the former are not. A systematic approach for dealing with statistical confounding in nonintervention research has been developed over the past 30 to 40 years, and the essence of this theory constitutes the contents of this article. An accompanying, less technical article explains the implications of these results for clinical research.

Technical Communication in the 21st Century: Where Are We Going?

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie

1999-01-01

Explores how technical communicators arrive at their attitudes toward the future and the effects of such attitudes toward current practice. Argues for a critically informed, open-minded approach to the future, an approach that encourages an honest self-criticism within the discipline of technical communication. (SC)

The Practice of Evaluation Research and the Use of Evaluation Results.

ERIC Educational Resources Information Center

Van den Berg, G.; Hoeben, W. Th. J. G.

1984-01-01

Lack of use of educational evaluation results in the Netherlands was investigated by analyzing 14 curriculum evaluation studies. Results indicated that rational decision making with a technical (empirical) evaluation approach makes utilization of results most likely. Incremental decision making and a conformative approach make utilization least…

[Esophagojejunal anastomoses with the EEA stapler after total gastrectomy. Technic and immediate results apropos of a recent series of 32 cases].

PubMed

Le Treut, Y P; Delpero, J R; Sabiani, P; Berthet, B; Bozon-Verduraz, E; Pol, B; Bricot, R

1987-12-01

32 consecutive total gastrectomies for cancer (20 extended total gastrectomies) were carried out through an abdominal approach. Reconstruction using a Rouxen-Y loop (28 cases) or an interposed jejunal loop (four cases) was done with an EEA stapled oesophago jejunostomy: 25 end to side and 5 end to end anastomosis were performed and two technical failures led to complete manual anastomosis. All patients have had post-operative X-ray examination: there was no anastomotic leakage in this series, even in the 3 patients (10%) who have died during the post-operative course. A critical study of this series and eight others one from elsewhere is presented: it is concluded that the stapling device allows an easier and safer oesophagojejunostomy than manual procedure, when great care is taken of technical details.

The Internet and Technical Services: A Point Break Approach.

ERIC Educational Resources Information Center

McCombs, Gillian M.

1994-01-01

Discusses implications of using the Internet for library technical services. Topics addressed include creative uses of the Internet; three basic applications on the Internet, i.e., electronic mail, remote log-in to another computer, and file transfer; electronic processing of information; electronic access to information; and electronic processing…

Approach for Estimating Exposures and Incremental Health ...

EPA Pesticide Factsheets

Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings” (Technical Approach Document). Also available for public review and comment are two supplementary documents: the detailed appendices for the Technical Approach Document and a supplementary report entitled “Developing a Concentration-Response Function for Pb Exposure and Cardiovascular Disease-Related Mortality.” Together, these documents describes an analysis for estimating exposures and incremental health effects created by renovations of public and commercial buildings (P&CBs). This analysis could be used to identify and evaluate hazards from renovation, repair, and painting activities in P&CBs. A general overview of how this analysis can be used to inform EPA’s hazard finding is described in the Framework document that was previously made available for public comment (79 FR 31072; FRL9910-44). The analysis can be used in any proposed rulemaking to estimate the reduction in deleterious health effects that would result from any proposed regulatory requirements to mitigate exposure from P&CB renovation activities. The Technical Approach Document describes in detail how the analyses under this approach have been performed and presents the results – expected changes in blood lead levels and health effects due to lead exposure from renovation activities.

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Do technical skills correlate with non-technical skills in crisis resource management: a simulation study.

PubMed

Riem, N; Boet, S; Bould, M D; Tavares, W; Naik, V N

2012-11-01

Both technical skills (TS) and non-technical skills (NTS) are key to ensuring patient safety in acute care practice and effective crisis management. These skills are often taught and assessed separately. We hypothesized that TS and NTS are not independent of each other, and we aimed to evaluate the relationship between TS and NTS during a simulated intraoperative crisis scenario. This study was a retrospective analysis of performances from a previously published work. After institutional ethics approval, 50 anaesthesiology residents managed a simulated crisis scenario of an intraoperative cardiac arrest secondary to a malignant arrhythmia. We used a modified Delphi approach to design a TS checklist, specific for the management of a malignant arrhythmia requiring defibrillation. All scenarios were recorded. Each performance was analysed by four independent experts. For each performance, two experts independently rated the technical performance using the TS checklist, and two other experts independently rated NTS using the Anaesthetists' Non-Technical Skills score. TS and NTS were significantly correlated to each other (r=0.45, P<0.05). During a simulated 5 min resuscitation requiring crisis resource management, our results indicate that TS and NTS are related to one another. This research provides the basis for future studies evaluating the nature of this relationship, the influence of NTS training on the performance of TS, and to determine whether NTS are generic and transferrable between crises that require different TS.

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

Technical and Clinical Results After Percutaneous Angioplasty in Nonmedial Fibromuscular Dysplasia: Outcome After Endovascular Management of Unifocal Renal Artery Stenoses in 30 Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrier, Pierre, E-mail: p.barrier@gmail.com; Julien, Auriol; Guillaume, Canevet

2010-04-15

Although percutaneous transluminal renal angioplasty (PTRA) is associated with excellent results in medial fibromuscular dysplasia (FMD), the clinical and technical outcome in the less common nonmedial subtype of FMD is not clearly known. Angiographic PTRA results and clinical follow-up were documented, to report technical and clinical results in 30 patients with unifocal, nonmedial dysplastic stenoses. Balloon angioplasty was technically successful in only 65% of the lesions. Additional stenting, performed after PTRA failure in six patients, increased the initial technical success rate to 82%. Stenting was used in another lesion after restenosis, and long-term patency was achieved in only three ofmore » the seven stented lesions. Frequent restenoses and unusual complications were observed during follow-up. Stent fracture occurred in two cases. Overall, long-term clinical and technical successes were sustained in 70 and 76%, respectively. We conclude that nonmedial, unifocal renal artery dysplastic stenoses do not share the excellent prognosis of the medial type and that stenting should be avoided. Therefore, surgery should be considered in lesions remaining unresponsive to balloon dilatation, after a second PTRA attempt.« less

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 22: US academic librarians and technical information specialists as information intermediaries: Results of the phase 3 survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis U.S. academic librarians and technical information specialists as information intermediaries.

Contextualizing Secure Information System Design: A Socio-Technical Approach

ERIC Educational Resources Information Center

Charif, Abdul Rahim

2017-01-01

Secure Information Systems (SIS) design paradigms have evolved in generations to adapt to IS security needs. However, modern IS are still vulnerable and are far from secure. The development of an underlying IS cannot be reduced to "technological fixes" neither is the design of SIS. Technical security cannot ensure IS security.…

Measuring and Benchmarking Technical Efficiency of Public Hospitals in Tianjin, China: A Bootstrap-Data Envelopment Analysis Approach.

PubMed

Li, Hao; Dong, Siping

2015-01-01

China has long been stuck in applying traditional data envelopment analysis (DEA) models to measure technical efficiency of public hospitals without bias correction of efficiency scores. In this article, we have introduced the Bootstrap-DEA approach from the international literature to analyze the technical efficiency of public hospitals in Tianjin (China) and tried to improve the application of this method for benchmarking and inter-organizational learning. It is found that the bias corrected efficiency scores of Bootstrap-DEA differ significantly from those of the traditional Banker, Charnes, and Cooper (BCC) model, which means that Chinese researchers need to update their DEA models for more scientific calculation of hospital efficiency scores. Our research has helped shorten the gap between China and the international world in relative efficiency measurement and improvement of hospitals. It is suggested that Bootstrap-DEA be widely applied into afterward research to measure relative efficiency and productivity of Chinese hospitals so as to better serve for efficiency improvement and related decision making. © The Author(s) 2015.

Assessing Cost-Effectiveness in Obesity (ACE-Obesity): an overview of the ACE approach, economic methods and cost results

PubMed Central

2009-01-01

Background The aim of the ACE-Obesity study was to determine the economic credentials of interventions which aim to prevent unhealthy weight gain in children and adolescents. We have reported elsewhere on the modelled effectiveness of 13 obesity prevention interventions in children. In this paper, we report on the cost results and associated methods together with the innovative approach to priority setting that underpins the ACE-Obesity study. Methods The Assessing Cost Effectiveness (ACE) approach combines technical rigour with 'due process' to facilitate evidence-based policy analysis. Technical rigour was achieved through use of standardised evaluation methods, a research team that assembles best available evidence and extensive uncertainty analysis. Cost estimates were based on pathway analysis, with resource usage estimated for the interventions and their 'current practice' comparator, as well as associated cost offsets. Due process was achieved through involvement of stakeholders, consensus decisions informed by briefing papers and 2nd stage filter analysis that captures broader factors that influence policy judgements in addition to cost-effectiveness results. The 2nd stage filters agreed by stakeholders were 'equity', 'strength of the evidence', 'feasibility of implementation', 'acceptability to stakeholders', 'sustainability' and 'potential for side-effects'. Results The intervention costs varied considerably, both in absolute terms (from cost saving [6 interventions] to in excess of AUD50m per annum) and when expressed as a 'cost per child' estimate (from

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

A stochastic frontier approach to study the relationship between gastrointestinal nematode infections and technical efficiency of dairy farms.

PubMed

van der Voort, Mariska; Van Meensel, Jef; Lauwers, Ludwig; Vercruysse, Jozef; Van Huylenbroeck, Guido; Charlier, Johannes

2014-01-01

The impact of gastrointestinal (GI) nematode infections in dairy farming has traditionally been assessed using partial productivity indicators. But such approaches ignore the impact of infection on the performance of the whole farm. In this study, efficiency analysis was used to study the association of the GI nematode Ostertagia ostertagi on the technical efficiency of dairy farms. Five years of accountancy data were linked to GI nematode infection data gained from a longitudinal parasitic monitoring campaign. The level of exposure to GI nematodes was based on bulk-tank milk ELISA tests, which measure the antibodies to O. ostertagi and was expressed as an optical density ratio (ODR). Two unbalanced data panels were created for the period 2006 to 2010. The first data panel contained 198 observations from the Belgian Farm Accountancy Data Network (Brussels, Belgium) and the second contained 622 observations from the Boerenbond Flemish farmers' union (Leuven, Belgium) accountancy system (Tiber Farm Accounting System). We used the stochastic frontier analysis approach and defined inefficiency effect models specified with the Cobb-Douglas and transcendental logarithmic (Translog) functional form. To assess the efficiency scores, milk production was considered as the main output variable. Six input variables were used: concentrates, roughage, pasture, number of dairy cows, animal health costs, and labor. The ODR of each individual farm served as an explanatory variable of inefficiency. An increase in the level of exposure to GI nematodes was associated with a decrease in technical efficiency. Exposure to GI nematodes constrains the productivity of pasture, health, and labor but does not cause inefficiency in the use of concentrates, roughage, and dairy cows. Lowering the level of infection in the interquartile range (0.271 ODR) was associated with an average milk production increase of 27, 19, and 9L/cow per year for Farm Accountancy Data Network farms and 63, 49, and

Technical and policy approaches to balancing patient privacy and data sharing in clinical and translational research.

PubMed

Malin, Bradley; Karp, David; Scheuermann, Richard H

2010-01-01

Clinical researchers need to share data to support scientific validation and information reuse and to comply with a host of regulations and directives from funders. Various organizations are constructing informatics resources in the form of centralized databases to ensure reuse of data derived from sponsored research. The widespread use of such open databases is contingent on the protection of patient privacy. We review privacy-related problems associated with data sharing for clinical research from technical and policy perspectives. We investigate existing policies for secondary data sharing and privacy requirements in the context of data derived from research and clinical settings. In particular, we focus on policies specified by the US National Institutes of Health and the Health Insurance Portability and Accountability Act and touch on how these policies are related to current and future use of data stored in public database archives. We address aspects of data privacy and identifiability from a technical, although approachable, perspective and summarize how biomedical databanks can be exploited and seemingly anonymous records can be reidentified using various resources without hacking into secure computer systems. We highlight which clinical and translational data features, specified in emerging research models, are potentially vulnerable or exploitable. In the process, we recount a recent privacy-related concern associated with the publication of aggregate statistics from pooled genome-wide association studies that have had a significant impact on the data sharing policies of National Institutes of Health-sponsored databanks. Based on our analysis and observations we provide a list of recommendations that cover various technical, legal, and policy mechanisms that open clinical databases can adopt to strengthen data privacy protection as they move toward wider deployment and adoption.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 35: The US government technical report and aerospace knowledge diffusion: Results of an on-going investigation

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Khan, A. Rahman; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded (U.S.) R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this paper, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from two surveys (one of five studies) of our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report and close with a brief overview of on-going research into the use of the U.S. government technical report as a rhetorical device for transferring federally funded aerospace R&D.

Design mentoring tool : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

Recreational technical diving part 1: an introduction to technical diving methods and activities.

PubMed

Mitchell, Simon J; Doolette, David J

2013-06-01

Technical divers use gases other than air and advanced equipment configurations to conduct dives that are deeper and/or longer than typical recreational air dives. The use of oxygen-nitrogen (nitrox) mixes with oxygen fractions higher than air results in longer no-decompression limits for shallow diving, and faster decompression from deeper dives. For depths beyond the air-diving range, technical divers mix helium, a light non-narcotic gas, with nitrogen and oxygen to produce 'trimix'. These blends are tailored to the depth of intended use with a fraction of oxygen calculated to produce an inspired oxygen partial pressure unlikely to cause cerebral oxygen toxicity and a nitrogen fraction calculated to produce a tolerable degree of nitrogen narcosis. A typical deep technical dive will involve the use of trimix at the target depth with changes to gases containing more oxygen and less inert gas during the decompression. Open-circuit scuba may be used to carry and utilise such gases, but this is very wasteful of expensive helium. There is increasing use of closed-circuit 'rebreather' devices. These recycle expired gas and potentially limit gas consumption to a small amount of inert gas to maintain the volume of the breathing circuit during descent and the amount of oxygen metabolised by the diver. This paper reviews the basic approach to planning and execution of dives using these methods to better inform physicians of the physical demands and risks.

Community and Technical College Foundations: The Results of a Survey of Washington State's Community and Technical College Foundations.

ERIC Educational Resources Information Center

Kirk, Henry P., Ed.

In 1992, all 32 state community and technical colleges in Washington State were contacted to obtain information on the characteristics and activities of the non-profit foundations which have been, or are being, established at each institution. Selected findings include the following: (1) a total of 25 foundations were established between 1963 and…

Technical Secondary Schools and the Labour Market: Some Results from a Tracer Study in Kenya.

ERIC Educational Resources Information Center

Narman, Anders

1988-01-01

Reports tracer studies of Kenyan youths leaving technical school to determine their success at obtaining gainful employment. Almost 43% were neither in formal schooling nor training, nor employed a year after leaving, although technical skills were seen as useful, particularly in private life. (DP)

Bubbles, shocks and elementary technical trading strategies

NASA Astrophysics Data System (ADS)

Fry, John

2014-01-01

In this paper we provide a unifying framework for a set of seemingly disparate models for bubbles, shocks and elementary technical trading strategies in financial markets. Markets operate by balancing intrinsic levels of risk and return. This seemingly simple observation is commonly over-looked by academics and practitioners alike. Our model shares its origins in statistical physics with others. However, under our approach, changes in market regime can be explicitly shown to represent a phase transition from random to deterministic behaviour in prices. This structure leads to an improved physical and econometric model. We develop models for bubbles, shocks and elementary technical trading strategies. The list of empirical applications is both interesting and topical and includes real-estate bubbles and the on-going Eurozone crisis. We close by comparing the results of our model with purely qualitative findings from the finance literature.

Estimation of Energy Efficiency of Means of Transport According to the Results of Technical Diagnostics

NASA Astrophysics Data System (ADS)

Shalkov, Anton; Mamaeva, Mariya

2017-11-01

The article considers the questions of application of nondestructive methods control of reducers of conveyor belts as a means of transport. Particular attention is paid to such types of diagnostics of technical condition as thermal control and analysis of the state of lubricants. The urgency of carrying out types of nondestructive testing presented in the article is determined by the increase of energy efficiency of transport systems of coal and mining enterprises, in particular, reducers of belt conveyors. Periodic in-depth spectral-emission diagnostics and monitoring of a temperature mode of operation oil in the operation of the control equipment and its technical condition and prevent the MTBF allows the monitoring of the actual technical condition of the gearbox of a belt conveyor. In turn, the thermal imaging diagnostics reveals defects at the earliest stage of their formation and development, which allows planning the volumes and terms of equipment repair. Presents diagnostics of the technical condition will allow monitoring in time the technical condition of the equipment and avoiding its premature failure. Thereby it will increase the energy efficiency of both the transport system and the enterprise as a whole, and also avoid unreasonable increases in operating and maintenance costs.

Studying Quality beyond Technical Rationality: Political and Symbolic Perspectives

ERIC Educational Resources Information Center

Blanco Ramírez, Gerardo

2013-01-01

The underlying paradigms that influence research on quality have remained alarmingly under-researched; this article analyses the constraints that a technical-rational approach for the study of quality in higher education imposes. Technical rationality has been the dominant paradigm that shapes research on quality in higher education.…

Technical Training: A Systematic Approach.

ERIC Educational Resources Information Center

Gammuto, John J.

1980-01-01

To employ scarce personnel and money to best advantage, company management must diagnose critical training needs and assign them priorities. A systems approach is recommended, which gives focus to training design while accommodating most organization training goals. Included are suggestions for system design, facility management, and cost…

First results of ground-based LWIR hyperspectral imaging remote gas detection

NASA Astrophysics Data System (ADS)

Zheng, Wei-jian; Lei, Zheng-gang; Yu, Chun-chao; Wang, Hai-yang; Fu, Yan-peng; Liao, Ning-fang; Su, Jun-hong

2014-11-01

The new progress of ground-based long-wave infrared remote sensing is presented. The LWIR hyperspectral imaging by using the windowing spatial and temporal modulation Fourier spectroscopy, and the results of outdoor ether gas detection, verify the features of LWIR hyperspectral imaging remote sensing and technical approach. It provides a new technical means for ground-based gas remote sensing.

The Management of Technical Services--1980.

ERIC Educational Resources Information Center

Rohdy, Margaret A.

1981-01-01

Examines the literature of administration of library technical services from both a library and a management approach, and describes some of the activities of management sections of various library organizations. There are 27 references. (RAA)

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 24: The technical communications practices of US aerospace engineers and scientists: Results of the phase 1 SAE mail survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communications practices of U.S. aerospace engineers and scientists affiliated with the Society of Automotive Engineers (SAE).

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report number 21: US aerospace industry librarians and technical information specialists as information intermediaries: Results of the phase 2 survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis U.S. aerospace industry librarians and technical information specialists as information intermediaries.

An evaluation of selected NASA scientific and technical information products: Results of a pilot study

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron

1989-01-01

A pilot study was conducted to evaluate selected NASA scientific and technical information (STI) products. The study, which utilized survey research in the form of a self-administered mail questionnaire, had a two-fold purpose -- to gather baseline data regarding the use and perceived usefulness of selected NASA STI products and to develop/validate questions that could be used in a future study concerned with the role of the U.S. government technical report in aeronautics. The sample frame consisted of 25,000 members of the American Institute of Aeronautics and Astronautics in the U.S. with academic, government or industrial affiliation. Simple random sampling was used to select 2000 individuals to participate in the study. Three hundred fifty-three usable questionnaires (17 percent response rate) were received by the established cutoff date. The findings indicate that: (1) NASA STI is used and is generally perceived as being important; (2) the use rate for NASA-authored conference/meeting papers, journal articles, and technical reports is fairly uniform; (3) a considerable number of respondents are unfamiliar with STAR (Scientific and Technical Aerospace Reports), IAA (International Aerospace Abstracts), SCAN (Selected Current Aerospace Notices), and the RECON on-line retrieval system; (4) a considerable number of respondents who are familiar with these media do not use them; and (5) the perceived quality of NASA-authored journal articles and technical reports is very good.

The forest health monitoring national technical reports: examples of analyses and results from 2001-2004

Treesearch

Mark J. Ambrose; Barbara L. Conkling; Kurt H. Riitters; John W. Coulston

2008-01-01

This brochure presents examples of analyses included in the first four Forest Health Monitoring (FHM) national technical reports. Its purpose is to introduce the reader to the kinds of information available in these and subsequent FHM national technical reports. Indicators presented here include drought, air pollution, forest fragmentation, and tree mortality. These...

A Portrait of Non-Tenure-Track Faculty in Technical and Professional Communication: Results of a Pilot Study

ERIC Educational Resources Information Center

Meloncon, Lisa; England, Peter; Ilyasova, Alex

2016-01-01

We report the results of a pilot study that offers the field of technical and professional communication its first look at material working conditions of contingent faculty, such as course loads, compensation, and professional support. Findings include that contingent faculty are more enduring with stable full-time, multi-year contracts; they…

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

A socio-technical approach for improving a Brazilian shoe manufacturing system.

PubMed

Renner, J S; de M Guimarães, L B; de Oliveira, P A B

2012-01-01

This article presents a macroergonomic intervention in a footwear company in Rio Grande do Sul, Brazil, to improve both the quality of life of the employees and productivity by optimizing the traditional Taylor/Ford work organization. Multi-functionality and team working were implemented as means of making tasks more flexible and richer and the working hours were changed. The results showed a reduction in human and material resource costs and a consequent improvement in health and workers quality of life. Although middle managerial staff displayed strong resistance to the project and to breaking traditional production paradigms, the socio-technical system has been implemented throughout the plant and is expected to end up becoming the benchmark for other companies in the sector. Macro-ergonomics, footwear industry, organization work.

Does Satisfaction Reflect the Technical Quality of Mental Health Care?

PubMed Central

Edlund, Mark J; Young, Alexander S; Kung, Fuan Yue; Sherbourne, Cathy D; Wells, Kenneth B

2003-01-01

Objective To analyze the relationship between satisfaction and technical quality of care for common mental disorders. Data Source A nationally representative telephone survey of 9,585 individuals conducted in 1997–1998. Study Design Using multinomial logistic regression techniques we investigated the association between a five-level measure of satisfaction with the mental health care available for personal or emotional problems and two quality indicators. The first measure, appropriate technical quality, was defined as use of either appropriate counseling or psychotropic medications during the prior year for a probable depressive or anxiety disorder. The second, active treatment, indicated whether the respondent had received treatment for a psychiatric disorder in the past year. Covariates included measures of physical and mental health and sociodemographic indicators. Principal Findings Appropriate technical quality of care was significantly associated with higher levels of satisfaction. The strength of the association was moderate. Conclusions Satisfaction is associated with technical quality of care. However, profiling quality of care with satisfaction will likely require large samples and case-mix adjustment, which may be more difficult for plans or provider groups to implement than measuring technical indicators. More importantly, satisfaction is not the same as technical quality, and our results suggest that at this time they cannot be made to approach each other closely enough to eliminate either. PMID:12785565

Technical features of the robot-assisted trans-axillary thyroidectomy.

PubMed

Axente, D D; Major, Z Z; Micu, C M; Constantea, N A

2013-01-01

Numerous minimally invasive techniques for thyroid surgery have been described in recent years. Technical disadvantages have led to low practicability, although these techniques proved to be safe and to deliver good results. The robotic system was developed to overcome the limits of endoscopic surgery.Recently, based on the advantages of this new technology, robot assisted endoscopic surgery was introduced for minimally invasive thyroid surgery as well. Our experience with robot-assisted transaxillary thyroid surgery begins in November 2010 when we have practiced our first unilateral total lobectomy. From November 2010 to March 2012, 50 patients underwent robot assisted endoscopic thyroid surgery using the transaxillary approach. The aim of this study is to present the technical details and particularities of this procedure, based on our experience.

The Scientist, Philosopher, and Rhetorician: The Three Dimensions of Technical Communication and Technology

ERIC Educational Resources Information Center

Garrison, Kevin

2014-01-01

Technical communication's attempt to prioritize theories of scholarship and pedagogy has resulted in several authors contributing a three-dimensional framework to approach technology: the instrumental perspective, the critical humanist perspective, and the user-centered perspective [1-3]. This article traces connections between this framework for…

A study on technical efficiency of a DMU (review of literature)

NASA Astrophysics Data System (ADS)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 33: The technical communications practices of US aerospace engineers and scientists: Results of the phase 1 AIAA mail survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communications practices of U.S. aerospace engineers and scientists who are members of the American Institute of Aeronautics and Astronautics (AIAA).

Understanding the state of health information in Ireland: A qualitative study using a socio-technical approach.

PubMed

Craig, Sarah; Kodate, Naonori

2018-06-01

The objective of this paper is to add to the broader literature on socio-technical theory and its value and/or relevance to health information in Ireland. The paper focuses on three factors that can impact on health information; those of policy, infrastructure and people (PIP) and examines how Ireland compares with other countries in relation to these factors. Qualitative methods (documentary analysis and semi-structured interviews) were used. Key policy and strategy documents, and original research articles from Australia, Canada, Ireland, the UK and the US were analysed from a comparative perspective. The dimensions of policy, infrastructure and people were then explored through semi-structured interviews with health information experts in Ireland. Their perceptions were compared with and contrasted against the findings from the documentary analysis, and examined thematically. The views of health information experts support the findings of the review of Ireland's development in this area compared with other countries and that Ireland lags behind others in policy and practice terms. The paper concludes that the three dimensions of policy, infrastructure and people do indeed help to frame the understanding of health information in Ireland and that a socio-technical perspective, combined with a comparative approach, can also help both policy makers and practitioners in identifying the scope for improvement in health information. Copyright © 2018 Elsevier B.V. All rights reserved.

Does a Math-Enhanced Curriculum and Instructional Approach Diminish Students' Attainment of Technical Skills? A Year-Long Experimental Study in Agricultural Power and Technology

ERIC Educational Resources Information Center

Young, R. Brent; Edwards, M. Craig; Leising, James G.

2009-01-01

The purpose of this study was to empirically test the posit that students who participated in a contextualized, mathematics-enhanced high school agricultural power and technology (APT) curriculum and aligned instructional approach would not differ significantly (p less than 0.05) in their technical competence from students who participated in the…

Physiological approach to optimal stereographic game programming: a technical guide

NASA Astrophysics Data System (ADS)

Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

1996-04-01

With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 25: The technical communications practices of British aerospace engineers and scientists: Results of the phase 4 RAeS mail survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communications practices of British aerospace engineers and scientists.

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

A socio-technical model to explore urban water systems scenarios.

PubMed

de Haan, Fjalar J; Ferguson, Briony C; Deletic, Ana; Brown, Rebekah R

2013-01-01

This article reports on the ongoing work and research involved in the development of a socio-technical model of urban water systems. Socio-technical means the model is not so much concerned with the technical or biophysical aspects of urban water systems, but rather with the social and institutional implications of the urban water infrastructure and vice versa. A socio-technical model, in the view purported in this article, produces scenarios of different urban water servicing solutions gaining or losing influence in meeting water-related societal needs, like potable water, drainage, environmental health and amenity. The urban water system is parameterised with vectors of the relative influence of each servicing solution. The model is a software implementation of the Multi-Pattern Approach, a theory on societal systems, like urban water systems, and how these develop and go through transitions under various internal and external conditions. Acknowledging that social dynamics comes with severe and non-reducible uncertainties, the model is set up to be exploratory, meaning that for any initial condition several possible future scenarios are produced. This article gives a concise overview of the necessary theoretical background, the model architecture and some initial test results using a drainage example.

Teaching Technical Skills through Play.

ERIC Educational Resources Information Center

Gullion, Laurie

The value of light-hearted play in teaching technical recreational sport skills is immense. Children as well as adults can learn more quickly and completely with a games-oriented approach. Often without realizing the hidden goal of excellent skiing or paddling, participants respond to intriguing tasks in a game, immerse themselves in good…

An Online Approach to Teaching International Outsourcing in Technical Communication Classes

ERIC Educational Resources Information Center

St. Amant, Kirk

2005-01-01

The growth of international online access has given rise to a new production method--international outsourcing--that has important implications for technical communication practices. Successful interactions within international outsourcing require individuals to understand how cultural factors could affect online interactions. Today's technical…

EPA Technical Support Centers (TSC): FY14 Lessons ...

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

Results of the first provisional technical secretariat interlaboratory comparison test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stuff, J.R.; Hoffland, L.

1995-06-01

The principal task of this laboratory in the first Provisional Technical Secretariat (PTS) Interlaboratory Comparison Test was to verify and test the extraction and preparation procedures outlined in the Recommended Operating Procedures for Sampling and Analysis in the Verification of Chemical Disarmament in addition to our laboratory extraction methods and our laboratory analysis methods. Sample preparation began on 16 May 1994 and analysis was completed on 12 June 1994. The analytical methods used included NMR ({sup 1}H and {sup 31}P) GC/AED, GC/MS (EI and methane CI), GC/IRD, HPLC/IC, HPLC/TSP/MS, MS/MS(Electrospray), and CZE.

One-and-a-half nostril endoscopic transsphenoidal approach for pituitary adenomas-a technical report.

PubMed

Wen, Guodao; Tang, Chao; Zhong, Chunyu; Li, Junyang; Cong, Zixiang; Zhou, Yuan; Liu, Kaidong; Zhang, Yong; Tohti, Mamatemin; Ma, Chiyuan

2016-11-15

Binostril endoscopic transsphenoidal approach (BETA) provides sufficient manipulation space and wide endoscopic vision, although it increases the trauma of nose. Mononostril endoscopic transsphenoidal approach (META) has minimal trauma of nose, at the expense of space within the operation. We describe a one-and-a-half nostril endoscopic transsphenoidal approach (OETA) that combines the advantages of BETA and META. We introduced OETA for pituitary adenomas with a detailed technical description. A retrospective analysis was also performed on 57 consecutive patients who underwent one-and-a-half nostril endoscopic transsphenoidal surgery between March 2014 and June 2015 at Jinling hospital. The gross total resection rate was 79%. The gross complete resection rate of Knosp grade 3 tumors were 63.6, and 27.3% in grade 4 tumors. Postoperative hormone remission was achieved in 14 out of 18 (77.8%) patients with secreting adenomas. Postoperative abnormal visual function improvement was achieved in 23 out of 32 patients (73%) with preoperative visual dysfunction. The overall intra-operative CSF leak was 17.5%, with the postoperative CSF leak decreased to 3.5% after the sellar reconstruction with the unilateral "rescue" nasoseptal flap procedure. The main sinonasal complaints 2 weeks after surgery were: loss of sense of smell (28%), decrease in sense of taste (4%), trouble breathing during the day (18%), thick nasal discharge (36%), post nasal discharge (8%), dried nasal material (6%), and headache (6%). Three months after surgery, there were no reports of decrease of taste, post nasal discharge, or dried nasal material. Other complaints were decreased significantly. Six months after surgery, the main complaints of sinonasal quality of life were negligible, and overall health status was near complete recovery to preoperative status. The one-and-a-half nostril endoscopic transsphenoidal approach for pituitary adenomas is a simple and reliable technique. It provides not only a

Technical Communication: Perspectives for the Eighties, Part 1. Proceedings of the Technical Communications Sessions at the 32Nd Annual Meeting of the Conference on College Composition and Communication

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

Proceeding of the technical communication sessions at the 32nd annual meeting of the Conference on College Composition and Communication held in Dallas, Texas, March 26-28, 1981 are summarized. The proceeding suggest that technical communication has become an important subfield and is becoming an intrinsic part of many undergraduate curricula. Technical communication as a separate discipline, however, is relatively new. For that reason, proceedings that can make current research available as quickly as possible are suggested for preparation. The following topics were addressed: (1) a history and definition of technical writing, (2) the case method is technical communication (3) teaching technical writing (4) oral communication and rhetorical theory, and (5) new approaches in and practical applications of technical writing.

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities

PubMed Central

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-01-01

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today’s technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities.

PubMed

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-07-14

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today's technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

A prescribed wake rotor inflow and flow field prediction analysis, user's manual and technical approach

NASA Technical Reports Server (NTRS)

Egolf, T. A.; Landgrebe, A. J.

1982-01-01

A user's manual is provided which includes the technical approach for the Prescribed Wake Rotor Inflow and Flow Field Prediction Analysis. The analysis is used to provide the rotor wake induced velocities at the rotor blades for use in blade airloads and response analyses and to provide induced velocities at arbitrary field points such as at a tail surface. This analysis calculates the distribution of rotor wake induced velocities based on a prescribed wake model. Section operating conditions are prescribed from blade motion and controls determined by a separate blade response analysis. The analysis represents each blade by a segmented lifting line, and the rotor wake by discrete segmented trailing vortex filaments. Blade loading and circulation distributions are calculated based on blade element strip theory including the local induced velocity predicted by the numerical integration of the Biot-Savart Law applied to the vortex wake model.

Technical Services Cost Studies in ARL Libraries. SPEC Kit 125.

ERIC Educational Resources Information Center

Hoerman, Heidi Lee

Based on a survey of Association of Research Libraries (ARL) member libraries in February 1986, this kit is designed to illustrate a wide range of alternative approaches to analyzing the costs of technical services. The kit consists of the following unedited primary-source documents: (1) SPEC Technical Services Costs Survey (Three-Year Update)…

Exploring Socio-Technical Insights for Safe Nursing Handover.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Turner, Paul

2017-01-01

Current efforts to improve nursing handover frequently use prescriptive approaches based on research evidence of handover issues within a single nursing ward or nursing specialty. Despite reported handover improvement, few studies adequately consider the transferability of results to other nursing handover environments or acknowledge the unique attributes that supported sustained improvement. With the increasing diffusion of electronic tools it has become even more critical to ensure that socio-technical issues that may impact on the quality and safety of nursing handovers are identified. This paper describes a qualitative research project that examined nursing handover in three different wards - General Medicine, General Surgery and Department of Emergency Medicine in a tertiary teaching hospital. Through conduct of a detailed analysis of nursing handover processes, this paper highlights the similarities and differences in the handover among the three different wards and presents five key socio-technical insights to support safe nursing handover.

Systems Engineering Technical Authority: A Path to Mission Success

NASA Technical Reports Server (NTRS)

Andary, James F.; So, Maria M.; Breindel, Barry

2008-01-01

The systems engineering of space missions to study planet Earth has been an important focus of the National Aeronautics and Space Administration (NASA) since its inception. But all space missions are becoming increasingly complex and this fact, reinforced by some major mishaps, has caused NASA to reevaluate their approach to achieving safety and mission success. A new approach ensures that there are adequate checks and balances in place to maximize the probability of safety and mission success. To this end the agency created the concept of Technical Authority which identifies a key individual accountable and responsible for the technical integrity of a flight mission as well as a project-independent reporting path. At the Goddard Space Flight Center (GSFC) this responsibility ultimately begins with the Mission Systems Engineer (MSE) for each satellite mission. This paper discusses the Technical Authority process and then describes some unique steps that are being taken at the GSFC to support these MSEs in meeting their responsibilities.

Technical Assistance Model for Long-Term Systems Change: Three State Examples

ERIC Educational Resources Information Center

Kasprzak, Christina; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

2010-01-01

The National Early Childhood Technical Assistance Center (NECTAC) Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) is grounded in conceptual frameworks in the literature on systems change and systems thinking. The NECTAC conceptual framework uses a logic model approach to change developed specifically for states' infant and…

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

Assessing the Effects of Organizational Culture, Rewards, and Individual Creativity on Technical Workgroup Performance

ERIC Educational Resources Information Center

Navaresse, Daniel O.; Yauch, Charlene A.; Goff, Kathy; Fonseca, Daniel J.

2014-01-01

This study used an experimental approach to investigate the conditions under which creative outcomes should be expected from the interplay of individual creativity, the innovation orientation of the organizational culture, and the rewards distribution rules. The results of this study suggest that the individual creativity of technically educated…

Linking Gateway Technical College with Workforce Development: The SC Johnson-A Family Company Story.

ERIC Educational Resources Information Center

Knudson, Edward

2004-01-01

Seven years ago, SC Johnson--A Family Company approached Gateway Technical College with a need to further strengthen their incumbent workforce's technical training and education. Retirements, brain drain, and competition for technical expertise were the forces driving SC Johnson to develop a comprehensive, flexible, and timely workplace education…

Scenarios for exercising technical approaches to verified nuclear reductions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doyle, James

2010-01-01

information for establishing a conceptual approach to a five-year technical program plan for research and development of nuclear arms reductions verification and transparency technologies and procedures.« less

A stochastic frontier analysis of technical efficiency of fish cage culture in Peninsular Malaysia.

PubMed

Islam, Gazi Md Nurul; Tai, Shzee Yew; Kusairi, Mohd Noh

2016-01-01

Cage culture plays an important role in achieving higher output and generating more export earnings in Malaysia. However, the cost of fingerlings, feed and labour have increased substantially for cage culture in the coastal areas in Peninsular Malaysia. This paper uses farm level data gathered from Manjung, Perak and Kota Tinggi, Johor to investigate the technical efficiency of brackish water fish cage culture using the stochastic frontier approach. The technical efficiency was estimated and specifically the factors affecting technical inefficiencies of fish cage culture system in Malaysia was investigated. On average, 37 percent of the sampled fish cage farms are technically efficient. The results suggest very high degrees of technical inefficiency exist among the cage culturists. This implies that great potential exists to increase fish production through improved efficiency in cage culture management in Peninsular Malaysia. The results indicate that farmers obtained grouper fingerlings from other neighboring countries due to scarcity of fingerlings from wild sources. The cost of feeding for grouper (Epinephelus fuscoguttatus) requires relatively higher costs compared to seabass (Lates calcarifer) production in cage farms in the study areas. Initiatives to undertake extension programmes at the farm level are needed to help cage culturists in utilizing their resources more efficiently in order to substantially enhance their fish production.

Information Design: A New Approach to Teaching Technical Writing Service Courses

ERIC Educational Resources Information Center

McKee, Candie DeLane

2012-01-01

This study used a needs assessment, process analysis, process design, and textbook design to develop a new process and new textbook, based on Cargile-Cook's layered literacies, Quesenbery's five qualities of usability, and Carliner's information design theories, for use in technical writing service learning courses. The needs assessment was based…

Advanced Stirling Convertor Dynamic Test Approach and Results

NASA Technical Reports Server (NTRS)

Meer, David W.; Hill, Dennis; Ursic, Joseph J.

2010-01-01

The U.S. Department of Energy (DOE), Lockheed Martin Corporation (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. As part of the extended operation testing of this power system, the Advanced Stirling Convertors (ASC) at NASA GRC undergo a vibration test sequence intended to simulate the vibration history that an ASC would experience when used in an ASRG for a space mission. This sequence includes testing at workmanship and flight acceptance levels interspersed with periods of extended operation to simulate prefueling and post fueling. The final step in the test sequence utilizes additional testing at flight acceptance levels to simulate launch. To better replicate the acceleration profile seen by an ASC incorporated into an ASRG, the input spectra used in testing the convertors was modified based on dynamic testing of the ASRG Engineering Unit (ASRG EU) at LM. This paper outlines the overall test approach, summarizes the test results from the ASRG EU, describes the incorporation of those results into the test approach, and presents the results of applying the test approach to the ASC-1 #3 and #4 convertors. The test results include data from several accelerometers mounted on the convertors as well as the piston position and output power variables.

A Systems Approach to Bio-Oil Stabilization - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Robert C; Meyer, Terrence; Fox, Rodney

2011-12-23

The objective of this project is to develop practical, cost effective methods for stabilizing biomass-derived fast pyrolysis oil for at least six months of storage under ambient conditions. The U.S. Department of Energy has targeted three strategies for stabilizing bio-oils: (1) reducing the oxygen content of the organic compounds comprising pyrolysis oil; (2) removal of carboxylic acid groups such that the total acid number (TAN) of the pyrolysis oil is dramatically reduced; and (3) reducing the charcoal content, which contains alkali metals known to catalyze reactions that increase the viscosity of bio-oil. Alkali and alkaline earth metals (AAEM), are knownmore » to catalyze decomposition reactions of biomass carbohydrates to produce light oxygenates that destabilize the resulting bio-oil. Methods envisioned to prevent the AAEM from reaction with the biomass carbohydrates include washing the AAEM out of the biomass with water or dilute acid or infusing an acid catalyst to passivate the AAEM. Infusion of acids into the feedstock to convert all of the AAEM to salts which are stable at pyrolysis temperatures proved to be a much more economically feasible process. Our results from pyrolyzing acid infused biomass showed increases in the yield of anhydrosugars by greater than 300% while greatly reducing the yield of light oxygenates that are known to destabilize bio-oil. Particulate matter can interfere with combustion or catalytic processing of either syngas or bio-oil. It also is thought to catalyze the polymerization of bio-oil, which increases the viscosity of bio-oil over time. High temperature bag houses, ceramic candle filters, and moving bed granular filters have been variously suggested for syngas cleaning at elevated temperatures. High temperature filtration of bio-oil vapors has also been suggested by the National Renewable Energy Laboratory although there remain technical challenges to this approach. The fast pyrolysis of biomass yields three main organic

Care networking: a study of technical mediations in a home telecare service.

PubMed

Correa, Gonzalo; Domènech, Miquel

2013-07-22

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor-network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 31: The technical communications practices of US aerospace engineers and scientists: Results of the phase 1 SME mail survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical communications practices of U.S. aerospace engineers and scientists affiliated with, not necessarily belonging to, the Society of Manufacturing Engineers (SME).

Develop a Comprehensive Technical Training and Data Collection Program for Structural Welders and Fitters: Technical Proposal

DTIC Science & Technology

2006-05-30

implementation Final Report 4 TECHNICAL PLAN AND RESULTS Task 1: Initiate the Project Management System Two senior NGSS production management...1 Technical Plan and Results...Third the system is hosted on a handheld unit which provides the foremen with an efficient daily planning tool. The Pilot System which entails

The Acoustical Presentation of Technical Information.

ERIC Educational Resources Information Center

Barnett, George A.

1992-01-01

Advocates listening to technical information in much the same way as scientists and engineers look at graphics to understand the relationships among variables. Specifies a number of potential benefits of this approach. Demonstrates the presentation of acoustic information with data on the frequency of television viewing from 1950 to 1988. (SR)

Technical note: Comparison of methane ebullition modelling approaches used in terrestrial wetland models

NASA Astrophysics Data System (ADS)

Peltola, Olli; Raivonen, Maarit; Li, Xuefei; Vesala, Timo

2018-02-01

Emission via bubbling, i.e. ebullition, is one of the main methane (CH4) emission pathways from wetlands to the atmosphere. Direct measurement of gas bubble formation, growth and release in the peat-water matrix is challenging and in consequence these processes are relatively unknown and are coarsely represented in current wetland CH4 emission models. In this study we aimed to evaluate three ebullition modelling approaches and their effect on model performance. This was achieved by implementing the three approaches in one process-based CH4 emission model. All the approaches were based on some kind of threshold: either on CH4 pore water concentration (ECT), pressure (EPT) or free-phase gas volume (EBG) threshold. The model was run using 4 years of data from a boreal sedge fen and the results were compared with eddy covariance measurements of CH4 fluxes.

Modelled annual CH4 emissions were largely unaffected by the different ebullition modelling approaches; however, temporal variability in CH4 emissions varied an order of magnitude between the approaches. Hence the ebullition modelling approach drives the temporal variability in modelled CH4 emissions and therefore significantly impacts, for instance, high-frequency (daily scale) model comparison and calibration against measurements. The modelling approach based on the most recent knowledge of the ebullition process (volume threshold, EBG) agreed the best with the measured fluxes (R2 = 0.63) and hence produced the most reasonable results, although there was a scale mismatch between the measurements (ecosystem scale with heterogeneous ebullition locations) and model results (single horizontally homogeneous peat column). The approach should be favoured over the two other more widely used ebullition modelling approaches and researchers are encouraged to implement it into their CH4 emission models.

Modelling technical snow production for skiing areas in the Austrian Alps with the physically based snow model AMUNDSEN

NASA Astrophysics Data System (ADS)

Hanzer, F.; Marke, T.; Steiger, R.; Strasser, U.

2012-04-01

Tourism and particularly winter tourism is a key factor for the Austrian economy. Judging from currently available climate simulations, the Austrian Alps show a particularly high vulnerability to climatic changes. To reduce the exposure of ski areas towards changes in natural snow conditions as well as to generally enhance snow conditions at skiing sites, technical snowmaking is widely utilized across Austrian ski areas. While such measures result in better snow conditions at the skiing sites and are important for the local skiing industry, its economic efficiency has also to be taken into account. The current work emerges from the project CC-Snow II, where improved future climate scenario simulations are used to determine future natural and artificial snow conditions and their effects on tourism and economy in the Austrian Alps. In a first step, a simple technical snowmaking approach is incorporated into the process based snow model AMUNDSEN, which operates at a spatial resolution of 10-50 m and a temporal resolution of 1-3 hours. Locations of skiing slopes within a ski area in Styria, Austria, were digitized and imported into the model environment. During a predefined time frame in the beginning of the ski season, the model produces a maximum possible amount of technical snow and distributes the associated snow on the slopes, whereas afterwards, until to the end of the ski season, the model tries to maintain a certain snow depth threshold value on the slopes. Due to only few required input parameters, this approach is easily transferable to other ski areas. In our poster contribution, we present first results of this snowmaking approach and give an overview of the data and methodology applied. In a further step in CC-Snow, this simple bulk approach will be extended to consider actual snow cannon locations and technical specifications, which will allow a more detailed description of technical snow production as well as cannon-based recordings of water and energy

ICT and Knowledge Construction: Towards New Features for the Socio-Technical Approach

ERIC Educational Resources Information Center

Cartelli, Antonio

2007-01-01

Purpose: The purpose of this paper is to provide an analysis and review of the sociotechnical approach as a result of analysis of experiences with the introduction of ICT in higher education. Design/methodology/approach: The experiences of the author with the creation of special web sites in palaeography are analysed paying special attention to…

INDOT Technical Training Plan : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

PubMed

Varabyova, Yauheniya; Schreyögg, Jonas

2013-09-01

There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Anterior Spinal Reconstruction to the Clivus Using an Expandable Cage After C2 Chordoma Resection Via a Labiomandibular Glossotomy Approach: A Technical Report.

PubMed

Ozpinar, Alp; Liu, Jesse J; Whitney, Nathaniel L; Tempel, Zachary J; Choi, Philip A; Andersen, Peter E; Coppa, Nicholas D; Hamilton, D Kojo

2016-06-01

En bloc resection of high-cervical chordomas is a technically challenging procedure associated with significant morbidity. Two key components of this procedure include the approach and the method of spinal reconstruction. A limited number of reported cases of en bloc resection of high-cervical chordomas have been reported in the literature. We report a novel case using an expandable cage to reconstruct the anterior spinal column above C2 with fixation to the clivus. We also report a novel anterior approach to the high-cervical spine via a midline labiomandibular glossotomy. We detail the management of complications related to 2 instances of wound dehiscence and hardware exposure requiring two additional operations. The final surgical procedure involved explantation of the anterior cervical plate and use of a vascularized radial graft to close the posterior pharyngeal defect and protect the hardware. At 26-month follow-up, the patient remained disease free without any neurologic deficit. We report the novel use of the midline labiomandibular glossotomy for surgical approach and reconstruction of the anterior column to the clivus with an expandable cage. The unique features of this operative strategy allowed the surgical team to tailor the construct intraoperatively, resulting in solid arthrodesis without significant neurologic sequelae. Labiomandibular glossotomy for approach to high anterior cervical chordomas followed by craniospinal reconstruction to the clivus with an expandable cage represents a novel technique for managing high cervical chordomas. Copyright © 2016 Elsevier Inc. All rights reserved.

Percutaneous Treatment of Coronary Chronic Total Occlusion Part 2: Technical Approach

PubMed Central

Galassi, Alfredo; Grantham, Aaron; Kandzari, David; Lombardi, William; Moussa, Issam; Thompson, Craig; Werner, Gerald; Chambers, Charles

2014-01-01

Dual injection is recommended for nearly all chronic total occlusion (CTO) percutaneous coronary intervention (PCI) to determine the optimal crossing strategy and guide wire advancement into the distal true lumen. Strategies that provide enhanced guide catheter support (such as long sheaths, large-bore guiding catheters, use of guide catheter extensions, and anchor techniques) are important for maximising the success rate and efficiency of CTO PCI. Use of a microcatheter or over-the-wire balloon is strongly recommended in CTO PCI for enhancing the penetrating power of the guidewire, enabling change in tip shape and allowing guidewire change (stiff CTO guidewires are not optimal for crossing non-occluded coronary segments). Adherence to a procedural strategy that standardises CTO technique and facilitates procedural success is recommended. Such a strategy would permit stepwise decision-making for antegrade and retrograde methods; inform guidewire selection; and incorporate alternative approaches for instances of initial failure. Given the paucity of long-term outcomes with use of novel crossing techniques (antegrade dissection/re-entry and retrograde), antegrade wire escalation is the preferred CTO crossing technique, if technically feasible. Using measures to minimise radiation exposure (including but not limited to use of 7.5 frames per second fluoroscopy and use of low magnification) and contrast administration is recommended. CTO PCI is best performed at centres with dedicated CTO PCI experience and expertise. Use of crossing difficulty prediction tools, such as the J-CTO score, can facilitate the selection of cases with a high likelihood of quick crossing that can be attempted at less experienced centres. PMID:29588803

Technical and scale efficiency in the delivery of child health services in Zambia: results from data envelopment analysis

PubMed Central

Achoki, Tom; Hovels, Anke; Masiye, Felix; Lesego, Abaleng; Leufkens, Hubert; Kinfu, Yohannes

2017-01-01

Objective Despite tremendous efforts to scale up key maternal and child health interventions in Zambia, progress has not been uniform across the country. This raises fundamental health system performance questions that require further investigation. Our study investigates technical and scale efficiency (SE) in the delivery of maternal and child health services in the country. Setting The study focused on all 72 health districts of Zambia. Methods We compiled a district-level database comprising health outcomes (measured by the probability of survival to 5 years of age), health outputs (measured by coverage of key health interventions) and a set of health system inputs, namely, financial resources and human resources for health, for the year 2010. We used data envelopment analysis to assess the performance of subnational units across Zambia with respect to technical and SE, controlling for environmental factors that are beyond the control of health system decision makers. Results Nationally, average technical efficiency with respect to improving child survival was 61.5% (95% CI 58.2% to 64.8%), which suggests that there is a huge inefficiency in resource use in the country and the potential to expand services without injecting additional resources into the system. Districts that were more urbanised and had a higher proportion of educated women were more technically efficient. Improved cooking methods and donor funding had no significant effect on efficiency. Conclusions With the pressing need to accelerate progress in population health, decision makers must seek efficient ways to deliver services to achieve universal health coverage. Understanding the factors that drive performance and seeking ways to enhance efficiency offer a practical pathway through which low-income countries could improve population health without necessarily seeking additional resources. PMID:28057650

A phenomenographic study of the ability to address complex socio-technical systems via variation theory

NASA Astrophysics Data System (ADS)

Mendoza Garcia, John A.

Sometimes engineers fail when addressing the inherent complexity of socio-technical systems because they lack the ability to address the complexity of socio-technical systems. Teaching undergraduate engineering students how to address complex socio-technical systems, has been an educational endeavor at different levels ranging from kindergarten to post-graduate education. The literature presents different pedagogical strategies and content to reach this goal. However, there are no existing empirically-based assessments guided by a learning theory. This may be because at the same time explanations of how the skill is developed are scarce. My study bridges this gap, and I propose a developmental path for the ability to address the complex socio-technical systems via Variation Theory, and according to the conceptual framework provided by Variation Theory, my research question was "What are the various ways in which engineers address complex socio-technical systems?" I chose the research approach of phenomenography to answer my research question. I also chose to use a blended approach, Marton's approach for finding the dimensions of variation, and the developmental approach (Australian) for finding a hierarchical relationship between the dimensions. Accordingly, I recruited 25 participants with different levels of experience with addressing complex socio-technical systems and asked them all to address the same two tasks: A design of a system for a county, and a case study in a manufacturing firm. My outcome space is a nona-dimensional (nine) developmental path for the ability to address the complexity in socio-technical systems, and I propose 9 different ways of experiencing the complexity of a socio-technical system. The findings of this study suggest that the critical aspects that are needed to address the complexity of socio-technical systems are: being aware of the use of models, the ecosystem around, start recognizing different boundaries, being aware of time as a

Dynamic research of masonry vault in a technical scale

NASA Astrophysics Data System (ADS)

Golebiewski, Michal; Lubowiecka, Izabela; Kujawa, Marcin

2017-03-01

The paper presents preliminary results of dynamic tests of the masonry barrel vault in a technical scale. Experimental studies are intended to identify material properties of homogenized masonry vaults under dynamic loads. The aim of the work is to create numerical models to analyse vault's dynamic response to dynamic loads in a simplest and accurate way. The process of building the vault in a technical scale is presented in the paper. Furthermore a excitation of vibrations with an electrodynamic modal exciter placed on the vault, controlled by an arbitrary waveform function generator, is discussed. Finally paper presents trends in the research for homogenization algorithm enabling dynamic analysis of masonry vaults. Experimental results were compared with outcomes of so-called macromodels (macromodel of a brick masonry is a model in which masonry, i.e. a medium consisting of two different fractions - bricks and mortar, is represented by a homogenized, uniformed, material). Homogenization entail significant simplifications, nevertheless according to the authors, can be a useful approach in a static and dynamic analysis of masonry structures.

RNA-seq: technical variability and sampling

PubMed Central

2011-01-01

Background RNA-seq is revolutionizing the way we study transcriptomes. mRNA can be surveyed without prior knowledge of gene transcripts. Alternative splicing of transcript isoforms and the identification of previously unknown exons are being reported. Initial reports of differences in exon usage, and splicing between samples as well as quantitative differences among samples are beginning to surface. Biological variation has been reported to be larger than technical variation. In addition, technical variation has been reported to be in line with expectations due to random sampling. However, strategies for dealing with technical variation will differ depending on the magnitude. The size of technical variance, and the role of sampling are examined in this manuscript. Results In this study three independent Solexa/Illumina experiments containing technical replicates are analyzed. When coverage is low, large disagreements between technical replicates are apparent. Exon detection between technical replicates is highly variable when the coverage is less than 5 reads per nucleotide and estimates of gene expression are more likely to disagree when coverage is low. Although large disagreements in the estimates of expression are observed at all levels of coverage. Conclusions Technical variability is too high to ignore. Technical variability results in inconsistent detection of exons at low levels of coverage. Further, the estimate of the relative abundance of a transcript can substantially disagree, even when coverage levels are high. This may be due to the low sampling fraction and if so, it will persist as an issue needing to be addressed in experimental design even as the next wave of technology produces larger numbers of reads. We provide practical recommendations for dealing with the technical variability, without dramatic cost increases. PMID:21645359

Side-effects and technical problems in cytapheresis with cell separators. Results of a retrospective multicenter study.

PubMed

Kretschmer, V

1987-09-01

On the basis of a survey, the acute side-effects and technical problems in a total of 77,525 cytaphereses (IFC 36,530, CFC 40,995) in donors at 39 hemapheresis centers were retrospectively analysed statistically. In general, relevant donor side-effects (0.78%-1.05%) were more rare than the primary donor-independent disturbances (1.65%-2.63%). The donor side-effects predominated merely with the use of the cell separators Haemonetics M30/Belco (1.06% vs. 0.57%). These were mainly circulatory reactions (0.83%), which were generally much more frequent with IFC (0.54%) than with CFC (IBM/Cobe 0.11%, CS-3000 0.19%). Potentially fatal complications were not reported. The frequency of side-effects, disturbances and discontinuations correlated inversely with the separation rate of the individual centers per method. Centers in which two or three methods were applied simultaneously reported a higher frequency of side-effects and disturbances. Hemolysis was only observed with IFC (0.09%), but not with the use of the Haemonetics V50. The greater susceptibility to disturbances of technical/methodological/operational origin essentially results from the more elaborate, but not yet perfected technology, including computer control and monitoring, as well as defects in the production of the much more complicated disposable sets. Thus the highest rate of discontinuations was calculated for the system which is so far the most sophisticated technically (CS-3000, 1.85%). Although the primary donor-independent problems sometimes correlate directly with the manifestation of donor side-effects, the greater technological sophistication of automatically controlled and monitored systems cannot be dispensed with, since only in this way can potentially fatal risks for the donors be largely ruled out.(ABSTRACT TRUNCATED AT 250 WORDS)

Care Networking: A Study of Technical Mediations in a Home Telecare Service

PubMed Central

Correa, Gonzalo; Domènech, Miquel

2013-01-01

This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor—network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships. PMID:23880730

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 1, part 1:] Technical communications in aeronautics: Results of an exploratory study

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Oliu, Walter E.; Barclay, Rebecca O.

1989-01-01

A study was undertaken that explored several aspects of technical communications in aeronautics. The study, which utilized survey research in the form of a self-administered questionnaire, was sent to 2,000 randomly selected members of the American Institute of Aeronautics and Astronautics. Six hundred and six usable questionnaires (30.3 percent) were received by the established cut off date. The study had five objectives. The first was to solicit the opinions of aeronautical engineers and scientists regarding the importance of technical communications to their profession; second, to determine their use and production of technical communications; third, to seek their views on the content of an undergraduate course in technical communications; fourth, to determine their use of libraries/technical information centers; and finally, to determine the use and importance of computer and information technology to them. The findings add considerable information to the knowledge of technical communications practices among aeronautical engineers and scientists and reinforce some of the conventional wisdom about technical communications and question other widely-held notions.

Usefulness of percutaneous intervention with transarterial approach in the salvage of nonmaturing native fistulas status-post transvenous approach failure: transarterial approach in the salvage of nonmaturing native fistulas.

PubMed

Hong, Hyun Pyo; Kim, Seung Kwon

2009-11-01

The purpose of this study was to assess the usefulness of percutaneous intervention with transarterial approach in the salvage of nonmaturing native fistulas status post transvenous approach failure. Eight patients (M:F=2:6; mean age, 56.8 years) underwent percutaneous intervention with antegrade transarterial approach when the retrograde transvenous approach failed. Mean time from fistula creation to fistulography was 80.5 days. Five patients had brachiocephalic fistulas and three had radiocephalic fistulas. Brachial or radial arterial access was performed using real-time ultrasound guidance, and balloon angioplasty was performed for hemodynamically significant (>50%) stenosis. Technical and clinical success and complications were evaluated. Patency following percutaneous intervention was estimated with the Kaplan-Meier method. Technical success was achieved in 87.5% (seven of eight patients). Clinical success of normal hemodialysis (fistula maturation) occurred in 87.5% (seven of eight patients). One minor complication (regional hematoma) occurred in one patient. Mean primary patency at 6, 12, and 18 months was 75%, 56.2%, and 37.5%, respectively. Additional angioplasty (n=3) resulted in mean secondary patency at 12 and 18 months of 87.5% and 87.5% of the patients, respectively. In conclusion, percutaneous intervention with the transarterial approach can be a useful method for salvage of nonmaturing native fistulas when the transvenous approach fails.

Technical Efficiency of Automotive Industry Cluster in Chennai

NASA Astrophysics Data System (ADS)

Bhaskaran, E.

2012-07-01

Chennai is also called as Detroit of India due to its automotive industry presence producing over 40 % of the India's vehicle and components. During 2001-2002, diagnostic study was conducted on the Automotive Component Industries (ACI) in Ambattur Industrial Estate, Chennai and in SWOT analysis it was found that it had faced problems on infrastructure, technology, procurement, production and marketing. In the year 2004-2005 under the cluster development approach (CDA), they formed Chennai auto cluster, under public private partnership concept, received grant from Government of India, Government of Tamil Nadu, Ambattur Municipality, bank loans and stake holders. This results development in infrastructure, technology, procurement, production and marketing interrelationships among ACI. The objective is to determine the correlation coefficient, regression equation, technical efficiency, peer weights, slack variables and return to scale of cluster before and after the CDA. The methodology adopted is collection of primary data from ACI and analyzing using data envelopment analysis (DEA) of input oriented Banker-Charnes-Cooper model. There is significant increase in correlation coefficient and the regression analysis reveals that for one percent increase in employment and net worth, the gross output increases significantly after the CDA. The DEA solver gives the technical efficiency of ACI by taking shift, employment, net worth as input data and quality, gross output and export ratio as output data. From the technical score and ranking of ACI, it is found that there is significant increase in technical efficiency of ACI when compared to CDA. The slack variables obtained clearly reveals the excess employment and net worth and no shortage of gross output. To conclude there is increase in technical efficiency of not only Chennai auto cluster in general but also Chennai auto components industries in particular.

Self-optimizing approach for automated laser resonator alignment

NASA Astrophysics Data System (ADS)

Brecher, C.; Schmitt, R.; Loosen, P.; Guerrero, V.; Pyschny, N.; Pavim, A.; Gatej, A.

2012-02-01

Nowadays, the assembly of laser systems is dominated by manual operations, involving elaborate alignment by means of adjustable mountings. From a competition perspective, the most challenging problem in laser source manufacturing is price pressure, a result of cost competition exerted mainly from Asia. From an economical point of view, an automated assembly of laser systems defines a better approach to produce more reliable units at lower cost. However, the step from today's manual solutions towards an automated assembly requires parallel developments regarding product design, automation equipment and assembly processes. This paper introduces briefly the idea of self-optimizing technical systems as a new approach towards highly flexible automation. Technically, the work focuses on the precision assembly of laser resonators, which is one of the final and most crucial assembly steps in terms of beam quality and laser power. The paper presents a new design approach for miniaturized laser systems and new automation concepts for a robot-based precision assembly, as well as passive and active alignment methods, which are based on a self-optimizing approach. Very promising results have already been achieved, considerably reducing the duration and complexity of the laser resonator assembly. These results as well as future development perspectives are discussed.

Diffusion of Technical Agricultural Information in Chile.

ERIC Educational Resources Information Center

Brown, Marion Ray

This study examined current thought concerning the role of mass communication in economic development in developing nations; analyzed existing efforts to diffuse agricultural technology in Chile; assessed the effectiveness of various approaches; and tested the effects (primarily on knowledge levels) of an experimental technical information service…

Wisconsin Technical College System Board Equity Staff Development Workshops and Services--Phase IV. Final Report.

ERIC Educational Resources Information Center

Baldus, Lorayne

A staff development program on gender equity was conducted for personnel in Wisconsin's technical colleges using the train-the-trainer method. The training took two approaches: a class for college personnel and career challenge training for project directors of single parent and displaced homemaker grants. The inservice class resulted in increased…

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we

Technical Feasibility Assessment of Lunar Base Mission Scenarios

NASA Astrophysics Data System (ADS)

Magelssen, Trygve ``Spike''; Sadeh, Eligar

2005-02-01

Investigation of the literature pertaining to lunar base (LB) missions and the technologies required for LB development has revealed an information gap that hinders technical feasibility assessment. This information gap is the absence of technical readiness levels (TRL) (Mankins, 1995) and information pertaining to the criticality of the critical enabling technologies (CETs) that enable mission success. TRL is a means of identifying technical readiness stages of a technology. Criticality is defined as the level of influence the CET has on the mission scenario. The hypothesis of this research study is that technical feasibility is a function of technical readiness and technical readiness is a function of criticality. A newly developed research analysis method is used to identify the technical feasibility of LB mission scenarios. A Delphi is used to ascertain technical readiness levels and CET criticality-to-mission. The research analysis method is applied to the Delphi results to determine the technical feasibility of the LB mission scenarios that include: observatory, science research, lunar settlement, space exploration gateway, space resource utilization, and space tourism. The CETs identified encompasses four major system level technologies of: transportation, life support, structures, and power systems. Results of the technical feasibility assessment show the observatory and science research LB mission scenarios to be more technical ready out of all the scenarios, but all mission scenarios are in very close proximity to each other in regard to criticality and TRL and no one mission scenario stands out as being absolutely more technically ready than any of the other scenarios. What is significant and of value are the Delphi results concerning CET criticality-to-mission and the TRL values evidenced in the Tables that can be used by anyone assessing the technical feasibility of LB missions.

Murine macrophages: a technical approach.

PubMed

Martinez-Pomares, Luisa; Gordon, Siamon

2008-01-01

In this chapter, we describe current protocols used for the characterization of macrophages (MPhi) in mouse tissues and in cell suspensions from spleen and lymph nodes. Also, we include a brief description of a complementary approach: culture of primary MPhi. Although culture MPhi are extremely useful for analysing the basic biology of MPhi and their receptors, it should not be forgotten that the term MPhi encompasses a wide range of different types of cells with phenotypic characteristics dependent on their activation state and tissue of origin. In our view, there is no perfect MPhi marker and analysis of the expression profile of several markers, and functional studies are required to make an informed guess of the cellular characteristics and function of the MPhi population of interest.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 45; The Technical Communications Practices of US Aerospace Engineers and Scientists: Results of the Phase 3 US Aerospace Engineering Educators Survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1996-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. Little is also known about the intermediary-based system that is used to transfer the results of federally funded R&D to the U.S. aerospace industry. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports, present a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communication practices of U.S. aerospace engineers and scientists who were members of the American Institute of Aeronautics and Astronautics (AIAA) and identified themselves as educators.

Current technical approaches to brain energy metabolism.

PubMed

Barros, L Felipe; Bolaños, Juan P; Bonvento, Gilles; Bouzier-Sore, Anne-Karine; Brown, Angus; Hirrlinger, Johannes; Kasparov, Sergey; Kirchhoff, Frank; Murphy, Anne N; Pellerin, Luc; Robinson, Michael B; Weber, Bruno

2018-06-01

Neuroscience is a technology-driven discipline and brain energy metabolism is no exception. Once satisfied with mapping metabolic pathways at organ level, we are now looking to learn what it is exactly that metabolic enzymes and transporters do and when, where do they reside, how are they regulated, and how do they relate to the specific functions of neurons, glial cells, and their subcellular domains and organelles, in different areas of the brain. Moreover, we aim to quantify the fluxes of metabolites within and between cells. Energy metabolism is not just a necessity for proper cell function and viability but plays specific roles in higher brain functions such as memory processing and behavior, whose mechanisms need to be understood at all hierarchical levels, from isolated proteins to whole subjects, in both health and disease. To this aim, the field takes advantage of diverse disciplines including anatomy, histology, physiology, biochemistry, bioenergetics, cellular biology, molecular biology, developmental biology, neurology, and mathematical modeling. This article presents a well-referenced synopsis of the technical side of brain energy metabolism research. Detail and jargon are avoided whenever possible and emphasis is given to comparative strengths, limitations, and weaknesses, information that is often not available in regular articles. © 2017 Wiley Periodicals, Inc.

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed Central

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-01-01

Background Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. Methods In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the ‘Anaesthetists’ Non-technical Skill’ score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Results Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI −0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team

INDEPENDENT TECHNICAL ASSESSMENT OF MANAGEMENT OF STORMWATER AND WASTEWATER AT THE SEPARATIONS PROCESS RESEARCH UNIT (SPRU) DISPOSITION PROJECT, NEW YORK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abitz, R.; Jackson, D.; Eddy-Dilek, C.

2011-06-27

The U.S. Department of Energy (DOE) is currently evaluating the water management procedures at the Separations Process Research Unit (SPRU). The facility has three issues related to water management that require technical assistance: (1) due to a excessive rainfall event in October, 2010, contaminated water collected in basements of G2 and H2 buildings. As a result of this event, the contractor has had to collect and dispose of water offsite; (2) The failure of a sump pump at a KAPL outfall resulted in a Notice of Violation issued by the New York State Department of Environment and Conservation (NYSDEC) andmore » subsequent Consent Order. On-site water now requires treatment and off-site disposition; and (3) stormwater infiltration has resulted in Strontium-90 levels discharged to the storm drains that exceed NR standards. The contractor has indicated that water management at SPRU requires major staff resources (at least 50 persons). The purpose of this review is to determine if the contractor's technical approach warrants the large number of staff resources and to ensure that the technical approach is compliant and in accordance with federal, state and NR requirements.« less

Investigating performance variability of processing, exploitation, and dissemination using a socio-technical systems analysis approach

NASA Astrophysics Data System (ADS)

Danczyk, Jennifer; Wollocko, Arthur; Farry, Michael; Voshell, Martin

2016-05-01

Data collection processes supporting Intelligence, Surveillance, and Reconnaissance (ISR) missions have recently undergone a technological transition accomplished by investment in sensor platforms. Various agencies have made these investments to increase the resolution, duration, and quality of data collection, to provide more relevant and recent data to warfighters. However, while sensor improvements have increased the volume of high-resolution data, they often fail to improve situational awareness and actionable intelligence for the warfighter because it lacks efficient Processing, Exploitation, and Dissemination and filtering methods for mission-relevant information needs. The volume of collected ISR data often overwhelms manual and automated processes in modern analysis enterprises, resulting in underexploited data, insufficient, or lack of answers to information requests. The outcome is a significant breakdown in the analytical workflow. To cope with this data overload, many intelligence organizations have sought to re-organize their general staffing requirements and workflows to enhance team communication and coordination, with hopes of exploiting as much high-value data as possible and understanding the value of actionable intelligence well before its relevance has passed. Through this effort we have taken a scholarly approach to this problem by studying the evolution of Processing, Exploitation, and Dissemination, with a specific focus on the Army's most recent evolutions using the Functional Resonance Analysis Method. This method investigates socio-technical processes by analyzing their intended functions and aspects to determine performance variabilities. Gaps are identified and recommendations about force structure and future R and D priorities to increase the throughput of the intelligence enterprise are discussed.

Results of the Boulder Consultation: The Beginnings of a Technical Assistance Program for the Office of Environmental Education/USOE/HEW.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC. Office of Environmental Education.

In December 1977, the Office of Environmental Education (OEE) brought its fiscal year '77 grant recipients together in Boulder, Colorado, for a technical assistance consultation. The technical assistance responsibilities of OEE are mandated by the Environmental Education Act. Until this consultation, OEE had been giving its technical assistance on…

Expanding and Redirecting Historical Research in Technical Writing: In Search of Our Past.

ERIC Educational Resources Information Center

Tebeaux, Elizabeth; Killingsworth, M. Jimmie

1992-01-01

Suggests an approach for expanding and integrating research to produce a history of technical writing. Defines problems that reside in writing such a history, suggests research premises and questions, and then applies these questions to technical writing as it existed in the English Renaissance, 1475-1640. (SR)

Exploration Medical System Technical Development

NASA Technical Reports Server (NTRS)

McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

2017-01-01

The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

Mediation of Artefacts, Tools and Technical Objects: An International and French Perspective

ERIC Educational Resources Information Center

Impedovo, Maria Antonietta; Andreucci, Colette; Ginestié, Jacques

2017-01-01

In this article we present a review of literature on the concept of Artefact, Tool and Technical Object in the light of sociocultural approach. Particular attention is given to present and discuss the French research tradition on the Technical Object and Technological education. The aim is to give a broad perspective to explore the mediation…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report No. 36: The Technical Communications Practices of US Aerospace Engineers and Scientists: Results of the Phase 1 NASA Langley Research Center Mail Survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communications practices of U.S. aerospace engineers and scientists who were assigned to the Research and Technology Group (RTG) at the NASA Langley Research Center in September 1995.

NASA/DoD Aerospace Knowledge Diffusion Research Project: Report 43: The Technical Communication Practices of U.S. Aerospace Engineers and Scientists: Results of the Phase 1 Mail Survey -- Manufacturing and Production Perspective

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1996-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communication practices of U.S. aerospace engineers and scientists who were members of the Society of Manufacturing Engineers.

Power, Language, and Professional Choices: A Hermeneutic Approach To Teaching Technical Communication.

ERIC Educational Resources Information Center

Tillery, Denise

2001-01-01

Argues that the philosophical hermeneutics of Hans-Georg Gadamer provides a useful theoretical framework from which to discuss ethical issues in the technical communication classroom. Analyzes a previously published case study to demonstrate how hermeneutics can shed light on the ways that writers can be unconscious of ethical problems in their…

A National Approach to Scientific and Technical Information in the United States.

ERIC Educational Resources Information Center

Becker, Joseph

Over the past 30 years, science has placed great stress on the importance of scientific and technical information (STI) to the individual scientist. The Baker, Crawford, Weinberg, SATCOM, Greenberger, and Conference Board reports extended this objective by emphasizing the need for new supporting methodology and by pointing up the critical…

Extraforaminal Lumbar Interbody Fusion at the L5-S1 Level: Technical Considerations and Feasibility.

PubMed

Kurzbuch, Arthur Robert; Kaech, Denis; Baranowski, Pawel; Baranowska, Alicja; Recoules-Arche, Didier

2017-09-01

Background  Extraforaminal lumbar interbody fusion (ELIF) surgery is a muscle-sparing approach that allows the treatment of various degenerative spinal diseases. It is technical challenging to perform the ELIF approach at the L5-S1 level because the sacral ala obstructs the view of the intervertebral disk space. Methods  We reported earlier on the ELIF technique in which the intervertebral disk is targeted at an angle of 45 degrees relative to the midline. In this article we describe the technical process we developed to overcome the anatomic relation between the sacral ala and the intervertebral disk space L5-S1 that hinders the ELIF approach at this level. We then report in a retrospective analysis on the short-term clinical and radiologic outcome of 100 consecutive patients with degenerative L5-S1 pathologies who underwent ELIF surgery. Results  The L5-S1 ELIF approach could be realized in all patients. The short-term clinical outcome was evaluated 5 months after surgery: 92% of the patients were satisfied with their postoperative result; 8% had a poor result. Overall, 17% of the patients presented light radicular or low back pain not influencing their daily activity, and 82% of the patients working before surgery returned to work 3 to 7 months after surgery. The radiologic outcome was documented by computed tomography at 5 months after surgery and showed fusion in 99% of the patients. Lumbar magnetic resonance imaging performed in 5 patients at 6 months after surgery revealed the integrity of the paraspinal muscles. Conclusions  ELIF surgery at the L5-S1 level is technically feasible for various degenerative spinal diseases. Analysis of the clinical and radiologic data in a consecutive retrospective cohort of patients who underwent this surgical procedure showed a good short-term clinical outcome and fusion rate. Georg Thieme Verlag KG Stuttgart · New York.

Technical note: Evaluation of the simultaneous measurements of mesospheric OH, HO2, and O3 under a photochemical equilibrium assumption - a statistical approach

NASA Astrophysics Data System (ADS)

Kulikov, Mikhail Y.; Nechaev, Anton A.; Belikovich, Mikhail V.; Ermakova, Tatiana S.; Feigin, Alexander M.

2018-05-01

This Technical Note presents a statistical approach to evaluating simultaneous measurements of several atmospheric components under the assumption of photochemical equilibrium. We consider simultaneous measurements of OH, HO2, and O3 at the altitudes of the mesosphere as a specific example and their daytime photochemical equilibrium as an evaluating relationship. A simplified algebraic equation relating local concentrations of these components in the 50-100 km altitude range has been derived. The parameters of the equation are temperature, neutral density, local zenith angle, and the rates of eight reactions. We have performed a one-year simulation of the mesosphere and lower thermosphere using a 3-D chemical-transport model. The simulation shows that the discrepancy between the calculated evolution of the components and the equilibrium value given by the equation does not exceed 3-4 % in the full range of altitudes independent of season or latitude. We have developed a statistical Bayesian evaluation technique for simultaneous measurements of OH, HO2, and O3 based on the equilibrium equation taking into account the measurement error. The first results of the application of the technique to MLS/Aura data (Microwave Limb Sounder) are presented in this Technical Note. It has been found that the satellite data of the HO2 distribution regularly demonstrate lower altitudes of this component's mesospheric maximum. This has also been confirmed by model HO2 distributions and comparison with offline retrieval of HO2 from the daily zonal means MLS radiance.

CT-guided bipolar and multipolar radiofrequency ablation (RF ablation) of renal cell carcinoma: specific technical aspects and clinical results.

PubMed

Sommer, C M; Lemm, G; Hohenstein, E; Bellemann, N; Stampfl, U; Goezen, A S; Rassweiler, J; Kauczor, H U; Radeleff, B A; Pereira, P L

2013-06-01

This study was designed to evaluate the clinical efficacy of CT-guided bipolar and multipolar radiofrequency ablation (RF ablation) of renal cell carcinoma (RCC) and to analyze specific technical aspects between both technologies. We included 22 consecutive patients (3 women; age 74.2 ± 8.6 years) after 28 CT-guided bipolar or multipolar RF ablations of 28 RCCs (diameter 2.5 ± 0.8 cm). Procedures were performed with a commercially available RF system (Celon AG Olympus, Berlin, Germany). Technical aspects of RF ablation procedures (ablation mode [bipolar or multipolar], number of applicators and ablation cycles, overall ablation time and deployed energy, and technical success rate) were analyzed. Clinical results (local recurrence-free survival and local tumor control rate, renal function [glomerular filtration rate (GFR)]) and complication rates were evaluated. Bipolar RF ablation was performed in 12 procedures and multipolar RF ablation in 16 procedures (2 applicators in 14 procedures and 3 applicators in 2 procedures). One ablation cycle was performed in 15 procedures and two ablation cycles in 13 procedures. Overall ablation time and deployed energy were 35.0 ± 13.6 min and 43.7 ± 17.9 kJ. Technical success rate was 100 %. Major and minor complication rates were 4 and 14 %. At an imaging follow-up of 15.2 ± 8.8 months, local recurrence-free survival was 14.4 ± 8.8 months and local tumor control rate was 93 %. GFR did not deteriorate after RF ablation (50.8 ± 16.6 ml/min/1.73 m(2) before RF ablation vs. 47.2 ± 11.9 ml/min/1.73 m(2) after RF ablation; not significant). CT-guided bipolar and multipolar RF ablation of RCC has a high rate of clinical success and low complication rates. At short-term follow-up, clinical efficacy is high without deterioration of the renal function.

The Relationship of Aptitudes to the Performance of Skilled Technical Jobs in Engine Manufacturing. Technical Report 1982-5 [and Supplement].

ERIC Educational Resources Information Center

Daniel, Mark; And Others

A study examined the relationship of aptitudes to the performance of skilled technical jobs in engine manufacturing. During the study, several approaches were utilized, including criterion-referenced validation, taxonomic validation, construct validation, and detailed anlaysis of the behaviors involved in performing the jobs. The study sample…

A new surgical and technical approach in zygomatic implantology

PubMed Central

GRECCHI, F.; BIANCHI, A.E.; SIERVO, S.; GRECCHI, E.; LAURITANO, D.

2017-01-01

SUMMARY Purpose Different surgical approaches for zygomatic implantology using new designed implants are reported. Material and methods The surgical technique is described and two cases reported. The zygomatic fixture has a complete extrasinus path in order to preserve the sinus membrane and to avoid any post-surgical sinus sequelae. Results The surgical procedure allows an optimal position of the implant and consequently an ideal emergence of the fixture on the alveolar crest. Conclusion The surgical procedures and the zygomatic implant design reduce remarkably the serious post-operative sequelae due to the intrasinus path of the zygomatic fixtures. PMID:29876045

Engineer's Needs for Scientific and Technical Information.

ERIC Educational Resources Information Center

David, A., Ed.; And Others

This study has as its main object the formulation of an approach, as global and comprehensive as possible, to the multiple aspects of the engineer's needs for scientific and technical information. The basis of the study is an analysis of the engineer's role, its characteristics, different specialties, levels of training, and categories of…

Interdisciplinary Relationships in Technical Education: The CORD Perspective.

ERIC Educational Resources Information Center

Hull, Daniel M.

1990-01-01

The director of the Center for Occupational Research and Development (CORD) suggests areas in a technical curriculum that could be improved using an interdisciplinary approach: (1) systems; (2) the electromechanical core; (3) the mathematics/science base; (4) computers; and (5) interpersonal/communication skills. (Author)

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

PubMed

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

TU-CD-213-01: Communication, Negotiation, and Persuasion: Approaches for Better Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J.

As part of the AAPM’s Scope of Practice, medical physicists are expected to collaborate effectively with practioners and allied health care providers. Interpersonal skills such as communication, negotiation and persuasion are vital for successful collaboration to achieve shared goals. This session will provide some theoretical background of these interpersonal skills as well as specific techniques and practical tools to influence others. Applications of these interpersonal skills for administrative and human resource management purposes vital to medical physicists will be shared. Session attendees will gain knowledge and tools to help them effectively collaborate with administrative and physician leaders in areas suchmore » as capital and human resource selection, prioritization, and implementation. Participants will hear methods of how to articulate their goals and to understand the goals of administration, helping ensure alignment of purpose. Session speakers will present one of the topics: equipment selection, budget creation, contracts, and program-related policy development. Specifics may include designing a business case in language that administrators understand, calculating the prioritization of budget requests, and influencing policies for safe and effective care. Human resource topics may include staffing justification, recruitment for fit, employment contracts, and benefits. Speakers will provide examples in both radiation therapy and diagnostic imaging departments and will share experiences and outcomes of their approaches for better results. Learning Objectives: After this course attendees will be better able to Understand the shared goal between administrative and physicist leadership. Articulate the “why” of the technical or human resource need. Utilize communication, negotiation and persuasion tools to improve collaboration.« less

TU-CD-213-03: Communication, Negotiation, and Persuasion: Approaches for Better Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, M.

As part of the AAPM’s Scope of Practice, medical physicists are expected to collaborate effectively with practioners and allied health care providers. Interpersonal skills such as communication, negotiation and persuasion are vital for successful collaboration to achieve shared goals. This session will provide some theoretical background of these interpersonal skills as well as specific techniques and practical tools to influence others. Applications of these interpersonal skills for administrative and human resource management purposes vital to medical physicists will be shared. Session attendees will gain knowledge and tools to help them effectively collaborate with administrative and physician leaders in areas suchmore » as capital and human resource selection, prioritization, and implementation. Participants will hear methods of how to articulate their goals and to understand the goals of administration, helping ensure alignment of purpose. Session speakers will present one of the topics: equipment selection, budget creation, contracts, and program-related policy development. Specifics may include designing a business case in language that administrators understand, calculating the prioritization of budget requests, and influencing policies for safe and effective care. Human resource topics may include staffing justification, recruitment for fit, employment contracts, and benefits. Speakers will provide examples in both radiation therapy and diagnostic imaging departments and will share experiences and outcomes of their approaches for better results. Learning Objectives: After this course attendees will be better able to Understand the shared goal between administrative and physicist leadership. Articulate the “why” of the technical or human resource need. Utilize communication, negotiation and persuasion tools to improve collaboration.« less

TU-CD-213-02: Communication, Negotiation, and Persuasion: Approaches for Better Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clements, J.

As part of the AAPM’s Scope of Practice, medical physicists are expected to collaborate effectively with practioners and allied health care providers. Interpersonal skills such as communication, negotiation and persuasion are vital for successful collaboration to achieve shared goals. This session will provide some theoretical background of these interpersonal skills as well as specific techniques and practical tools to influence others. Applications of these interpersonal skills for administrative and human resource management purposes vital to medical physicists will be shared. Session attendees will gain knowledge and tools to help them effectively collaborate with administrative and physician leaders in areas suchmore » as capital and human resource selection, prioritization, and implementation. Participants will hear methods of how to articulate their goals and to understand the goals of administration, helping ensure alignment of purpose. Session speakers will present one of the topics: equipment selection, budget creation, contracts, and program-related policy development. Specifics may include designing a business case in language that administrators understand, calculating the prioritization of budget requests, and influencing policies for safe and effective care. Human resource topics may include staffing justification, recruitment for fit, employment contracts, and benefits. Speakers will provide examples in both radiation therapy and diagnostic imaging departments and will share experiences and outcomes of their approaches for better results. Learning Objectives: After this course attendees will be better able to Understand the shared goal between administrative and physicist leadership. Articulate the “why” of the technical or human resource need. Utilize communication, negotiation and persuasion tools to improve collaboration.« less

Marketing information: The technical report as product

NASA Technical Reports Server (NTRS)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

The VEPSY UPDATED Project: clinical rationale and technical approach.

PubMed

Riva, G; Alcãniz, M; Anolli, L; Bacchetta, M; Baños, R; Buselli, C; Beltrame, F; Botella, C; Castelnuovo, G; Cesa, G; Conti, S; Galimberti, C; Gamberini, L; Gaggioli, A; Klinger, E; Legeron, P; Mantovani, F; Mantovani, G; Molinari, E; Optale, G; Ricciardiello, L; Perpiñá, C; Roy, S; Spagnolli, A; Troiani, R; Weddle, C

2003-08-01

More than 10 years ago, Tart (1990) described virtual reality (VR) as a technological model of consciousness offering intriguing possibilities for developing diagnostic, inductive, psychotherapeutic, and training techniques that can extend and supplement current ones. To exploit and understand this potential is the overall goal of the "Telemedicine and Portable Virtual Environment in Clinical Psychology"--VEPSY UPDATED--a European Community-funded research project (IST-2000-25323, www.cybertherapy.info). Particularly, its specific goal is the development of different PC-based virtual reality modules to be used in clinical assessment and treatment of social phobia, panic disorders, male sexual disorders, obesity, and eating disorders. The paper describes the clinical and technical rationale behind the clinical applications developed by the project. Moreover, the paper focuses its analysis on the possible role of VR in clinical psychology and how it can be used for therapeutic change.

Naval Training Device Center Index of Technical Reports.

ERIC Educational Resources Information Center

Walker, Lemuel E.

Published Naval Training Device Center technical reports and some technical notes (those available through the Defense Documentation Center-DDC) which have resulted from basic research, exploratory development, and advanced development type projects are listed. The reports are indexed by technical note number, by title, and by contractor code. The…

Inquiries into Malaysia's socio-technical disasters: recommendations and lessons learnt.

PubMed

Said, Aini Mat; Ahmadun, Fakhru'l-Razi; Abdul Kadir, Razali; Daud, Mohamed

2009-04-01

Most democratic countries hold inquiries into disasters. One of their key functions is to establish the cause of an event and to learn lessons in order to prevent a recurrence. In addition, they offer an opportunity for communal catharsis, permitting the public to vent anger, distress and frustration and to exert pressure for policy changes. Malaysia has experienced six landmark socio-technical disasters since 1968, which resulted in the proposal or amendment of various safety/emergency acts and regulations. The authors used a grounded theory approach utilising a constant comparative method to analyse the recommendations made by the inquiries into these events. Data indicate that social and technical recommendations comprise 85 and 15 per cent, respectively, of the total recommendations made by the inquiry committees. This paper offers suggestions for improving the management of inquiry tribunals, as they will remain a valuable source of information for society and corporations to learn from past incidents.

Australian Business Graduates' Perceptions of Non-Technical Skills within the Workplace

ERIC Educational Resources Information Center

Roepen, Dean

2017-01-01

Purpose: The purpose of this paper is to explore non-technical skills from the perspective of Australian business graduates who had recently made the transition from higher education into full-time employment. Design/methodology/approach: A mixed-methods approach was applied through the use of an online survey containing closed and open-ended…

Robotic selective neck dissection using a gasless postauricular facelift approach for early head and neck cancer: technical feasibility and safety.

PubMed

Tae, Kyung; Ji, Yong Bae; Song, Chang Myeon; Min, Hyun Jung; Kim, Kyung Rae; Park, Chul Won

2013-03-01

Abstract Background: Scarless and minimally invasive surgery is becoming popular in the head and neck area. We have developed a new robotic selective neck dissection procedure for head and neck squamous cell carcinoma (HNSCC) to avoid a long visible lateral neck scar. Here we report on the technical feasibility and safety of our procedure. We prospectively analyzed 4 patients with early HNSCC who underwent transoral robotic surgery (TORS) and concomitant robotic selective neck dissection via a gasless postauricular facelift approach using the da Vinci(®) Surgical System (Intuitive Surgical Inc., Sunnyvale, CA). Of these patients, 3 were male, and 1 was female. The mean age was 59.0±8.8 years. All patients had tongue cancer, with a clinically negative neck. Three patients were T1, and 1 patient was T2. All patients underwent partial glossectomy by TORS and elective robotic selective neck dissection including levels I, II, and III. The robotic selective neck dissection procedure was completed successfully in all patients. The mean operative time was 276±48 minutes. The mean number of lymph nodes removed was 19.3±7.3. Postoperative hematoma and transient marginal nerve palsy occurred in 1 patient each. Cosmetic satisfaction was excellent in all patients. Preliminary results indicate that robotic selective neck dissection via a gasless postauricular facelift approach is feasible and safe and allows for excellent postoperative cosmesis. Further studies are necessary to determine the oncologic safety and surgical completeness of this procedure compared with conventional neck dissection.

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

PubMed

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Risk assessments for mixtures: technical methods commonly used in the United States

EPA Science Inventory

A brief (20 minute) talk on the technical approaches used by EPA and other US agencies to assess risks posed by combined exposures to one or more chemicals. The talk systemically reviews the methodologies (whole-mixtures and component-based approaches) that are or have been used ...

Measured noise reductions resulting from modified approach procedures for business jet aircraft

NASA Technical Reports Server (NTRS)

Burcham, F. W., Jr.; Putnam, T. W.; Lasagna, P. L.; Parish, O. O.

1975-01-01

Five business jet airplanes were flown to determine the noise reductions that result from the use of modified approach procedures. The airplanes tested were a Gulfstream 2, JetStar, Hawker Siddeley 125-400, Sabreliner-60 and LearJet-24. Noise measurements were made 3, 5, and 7 nautical miles from the touchdown point. In addition to a standard 3 deg glide slope approach, a 4 deg glide slope approach, a 3 deg glide slope approach in a low-drag configuration, and a two-segment approach were flown. It was found that the 4 deg approach was about 4 EPNdB quieter than the standard 3 deg approach. Noise reductions for the low-drag 3 deg approach varied widely among the airplanes tested, with an average of 8.5 EPNdB on a fleet-weighted basis. The two-segment approach resulted in noise reductions of 7 to 8 EPNdB at 3 and 5 nautical miles from touchdown, but only 3 EPNdB at 7 nautical miles from touchdown when the airplanes were still in level flight prior to glide slope intercept. Pilot ratings showed progressively increasing workload for the 4 deg, low-drag 3 deg, and two-segment approaches.

1976-1977 Johnson-O'Malley Technical Assistance Handbook.

ERIC Educational Resources Information Center

Leonard, Terry

Designed to provide a practical approach to the rules and regulations governing implementation of the American Indian Self-Determination and Education Assistance Act (PL 93-638) in conjunction with the Johnson-O'Malley Act (JOM), this technical assistance handbook is written in comic book style. Using straightforward language, this manual…

Technical Adequacy of the easyCBM Primary-Level Reading Measures (Grades K-1), 2009-2010 Version. Technical Report #1003

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Nese, Joseph F. T.; Jamgochian, Elisa M.; Alonzo, Julie; Tindal, Gerald

2010-01-01

In this technical report, we provide the results of a series of studies on the technical adequacy of the early reading measures available on the easyCBM[R] assessment system. The results from the two-level hierarchical linear growth model analyses suggest that the reliability of the slope estimates for the easyCBM[R] reading measures are strong,…

Technical Excellence: A Requirement for Good Engineering

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2008-01-01

Technical excellence is a requirement for good engineering. Technical excellence has many different ways of expressing itself within engineering. NASA has initiatives that address the enhancement of the Agency's technical excellence and thrust to maintain the associated high level of performance by the Agency on current programs/projects and as it moves into the Constellation Program and the return to the Moon with plans to visit Mars. This paper addresses some of the key initiatives associated with NASA's technical excellence thrust. Examples are provided to illustrate some results being achieved and plans to enhance these initiatives.

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Creating technical heritage object replicas in a virtual environment

NASA Astrophysics Data System (ADS)

Egorova, Olga; Shcherbinin, Dmitry

2016-03-01

The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of learning is achieved while promoting the preservation of the replicas for future generations. Modern approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.

Facilitating Service Learning in the Online Technical Communication Classroom

ERIC Educational Resources Information Center

Nielsen, Danielle

2016-01-01

Drawing from the author's experience teaching online technical communication courses with an embedded service-learning component, this essay opens the discussion to the potential problems involved in designing online service-learning courses and provides practical approaches to integrating service learning into online coursework. The essay…

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

PubMed Central

Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-01-01

Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches

PubMed Central

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P.; Berg, Marc

2007-01-01

Background To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. Objectives To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Case study Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Results Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one “centralised” and the other “decentralised” have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. Conclusion The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes. PMID:17627296

Technical Guidance for Assessing Environmental Justice in ...

EPA Pesticide Factsheets

The Technical Guidance for Assessing Environmental Justice in Regulatory Analysis (also referred to as the Environmental Justice Technical Guidance or EJTG) is intended for use by Agency analysts, including risk assessors, economists, and other analytic staff that conduct analyses to evaluate EJ concerns in the context of regulatory actions. Senior EPA managers and decision makers also may find this document useful to understand analytic expectations and to ensure that EJ concerns are appropriately considered in the development of analyses to support regulatory actions under EPA’s action development process. Specifically, the document outlines approaches and methods to help Agency analysts evaluate EJ concerns. The document provides overarching direction to analysts by outlining a series of questions that will ensure the decision maker has appropriate information about baseline risks across population groups, and how those risks are distributed under the options being considered. In addition, the document provides a set of recommendations and requirements as well as best practices for use in analyzing and reporting results from consideration of EJ concerns. These principles will help ensure consistency, quality, and transparency across regulatory actions, while allowing for flexibility needed across different regulatory actions. The purpose of the EJTG is ensure consistency, quality, and transparency in considering environmental justice, while allowing f

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... System. The conference will explore the progress made on the priorities for addressing risks to...

Role of medical, technical, and administrative leadership in the human resource management life cycle: a team approach to laboratory management.

PubMed

Wilkinson, D S; Dilts, T J

1999-01-01

We believe the team approach to laboratory management achieves the best outcomes. Laboratory management requires the integration of medical, technical, and administrative expertise to achieve optimal service, quality, and cost performance. Usually, a management team of two or more individuals must be assembled to achieve all of these critical leadership functions. The individual members of the management team must possess the requisite expertise in clinical medicine, laboratory science, technology management, and administration. They also must work together in a unified and collaborative manner, regardless of where individual team members appear on the organizational chart. The management team members share in executing the entire human resource management life cycle, creating the proper environment to maximize human performance. Above all, the management team provides visionary and credible leadership.

Examining the Role of Transformational Leadership in Technology Adoption: Evidence from Bruneian Technical & Vocational Establishments (TVE)

ERIC Educational Resources Information Center

Seyal, Afzaal H.

2015-01-01

This pioneering study discusses the thirty-five Bruneian technical & vocational institutions of top management (principals, deputy principals, senior masters, ICT coordinators and technical administrators) leadership style with the adoption of Information and Communication Technologies (ICT). The study uses a survey approach further to…

Addressing the social dimensions of citizen observatories: The Ground Truth 2.0 socio-technical approach for sustainable implementation of citizen observatories

NASA Astrophysics Data System (ADS)

Wehn, Uta; Joshi, Somya; Pfeiffer, Ellen; Anema, Kim; Gharesifard, Mohammad; Momani, Abeer

2017-04-01

Owing to ICT-enabled citizen observatories, citizens can take on new roles in environmental monitoring, decision making and co-operative planning, and environmental stewardship. And yet implementing advanced citizen observatories for data collection, knowledge exchange and interactions to support policy objectives is neither always easy nor successful, given the required commitment, trust, and data reliability concerns. Many efforts are facing problems with the uptake and sustained engagement by citizens, limited scalability, unclear long-term sustainability and limited actual impact on governance processes. Similarly, to sustain the engagement of decision makers in citizen observatories, mechanisms are required from the start of the initiative in order to have them invest in and, hence, commit to and own the entire process. In order to implement sustainable citizen observatories, these social dimensions therefore need to be soundly managed. We provide empirical evidence of how the social dimensions of citizen observatories are being addressed in the Ground Truth 2.0 project, drawing on a range of relevant social science approaches. This project combines the social dimensions of citizen observatories with enabling technologies - via a socio-technical approach - so that their customisation and deployment is tailored to the envisaged societal and economic impacts of the observatories. The projects consists of the demonstration and validation of six scaled up citizen observatories in real operational conditions both in the EU and in Africa, with a specific focus on flora and fauna as well as water availability and water quality for land and natural resources management. The demonstration cases (4 EU and 2 African) cover the full 'spectrum' of citizen-sensed data usage and citizen engagement, and therefore allow testing and validation of the socio-technical concept for citizen observatories under a range of conditions.

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned

PubMed Central

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M.; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, AIDS

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting. PMID:28149445

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned.

PubMed

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, Aids

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting.

Technical efficiency of public district hospitals and health centres in Ghana: a pilot study

PubMed Central

Osei, Daniel; d'Almeida, Selassi; George, Melvill O; Kirigia, Joses M; Mensah, Ayayi Omar; Kainyu, Lenity H

2005-01-01

Background The Government of Ghana has been implementing various health sector reforms (e.g. user fees in public health facilities, decentralization, sector-wide approaches to donor coordination) in a bid to improve efficiency in health care. However, to date, except for the pilot study reported in this paper, no attempt has been made to make an estimate of the efficiency of hospitals and/or health centres in Ghana. The objectives of this study, based on data collected in 2000, were: (i) to estimate the relative technical efficiency (TE) and scale efficiency (SE) of a sample of public hospitals and health centres in Ghana; and (ii) to demonstrate policy implications for health sector policy-makers. Methods The Data Envelopment Analysis (DEA) approach was used to estimate the efficiency of 17 district hospitals and 17 health centres. This was an exploratory study. Results Eight (47%) hospitals were technically inefficient, with an average TE score of 61% and a standard deviation (STD) of 12%. Ten (59%) hospitals were scale inefficient, manifesting an average SE of 81% (STD = 25%). Out of the 17 health centres, 3 (18%) were technically inefficient, with a mean TE score of 49% (STD = 27%). Eight health centres (47%) were scale inefficient, with an average SE score of 84% (STD = 16%). Conclusion This pilot study demonstrated to policy-makers the versatility of DEA in measuring inefficiencies among individual facilities and inputs. There is a need for the Planning and Budgeting Unit of the Ghana Health Services to continually monitor the productivity growth, allocative efficiency and technical efficiency of all its health facilities (hospitals and health centres) in the course of the implementation of health sector reforms. PMID:16188021

Technical assistance and the transfer of remote sensing technology. [for economic development

NASA Technical Reports Server (NTRS)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

Workplace Skills in Practice. Case Studies of Technical Work.

ERIC Educational Resources Information Center

Stasz, Cathleen; And Others

A study was conducted to explore skills and work-related dispositions in technical work. It used a sociocultural approach to examine skills in seven target jobs in worksites representing diverse industries--health care, traffic management, transportation, and semiconductor manufacturing. It explored employers' strategies for obtaining the skills…

Olfactory preservation during anterior interhemispheric approach for anterior skull base lesions: technical note.

PubMed

Matano, Fumihiro; Murai, Yasuo; Mizunari, Takayuki; Tateyama, Kojiro; Kobayashi, Shiro; Adachi, Koji; Kamiyama, Hiroyasu; Morita, Akio; Teramoto, Akira

2016-01-01

Anosmia is not a rare complication of surgeries that employ the anterior interhemispheric approach. Here, we present a fibrin-gelatin fixation method that provides reinforcement and moisture to help preserve the olfactory nerve when using the anterior interhemispheric approach and describe the results and outcomes of this technique. We analyze the outcomes with this technique in 45 patients who undergo surgery for aneurysms, brain tumors, or other pathologies via the anterior interhemispheric approach. Anosmia occurred in 4 patients (8.8%); it was transient in 2 (4.4%) and permanent in the remaining 2 (4.4%). Brain tumors clearly attached to the olfactory nerve were resected in the patients with permanent anosmia. We found a significant difference in the presence of anosmia between patients with or without lesions that were attaching the olfactory nerve (p = 0.011). Our results suggested that fibrin-gelatin fixation method can reduce the reported risk of anosmia. However, the possibility of olfactory nerve damage is relatively high when operating on brain tumors attaching olfactory nerve.

How to develop and write a case for technical writing

NASA Technical Reports Server (NTRS)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

NOTES: a review of the technical problems encountered and their solutions.

PubMed

Mintz, Yoav; Horgan, Santiago; Cullen, John; Stuart, David; Falor, Eric; Talamini, Mark A

2008-08-01

Natural orifice translumenal endoscopic surgery (NOTES) is currently investigated and developed worldwide. In the past few years, multiple groups have confronted this challenge. Many technical problems are encountered in this technique due to the currently available tools for this approach. Some of the unique technical problems in NOTES include: blindly performed primary incisions; uncontrolled pneumoperitoneal pressure; no support for the endoscope in the abdominal cavity; inadequate vision; insufficient illumination; limited retraction and exposure; and the complexity of suturing and performing a safe anastomosis. In this paper, we review the problems encountered in NOTES and provide possible temporary solutions. Acute and survival studies were performed on 15 farm pigs. The hybrid technique approach (i.e., endoscopic surgery with the aid of laparoscopic vision) was performed in all cases. Procedures performed included liver biopsies, bilateral tubal ligation, oophprectomy, cholecystectomy, splenectomy and small bowel resection, and anastomosis. All attempted procedures were successfully performed. New methods and techniques were developed to overcome the technical problems. Closure of the gastrotomy was achieved by T-bar sutures and by stapler closure of the stomach incision. Small bowel anastomosis was achieved by the dual-lumen NOTES technique. The hybrid technique serves as a temporary approach to aid in developing the NOTES technique. A rectal or vaginal port of entry enables and facilitates gastrointestinal NOTES by using available laparoscopic instruments. The common operations performed today in the laparoscopic fashion could be probably performed in the NOTES approach. The safety of these procedures, however, is yet to be determined.

Bridging Scales: A Model-Based Assessment of the Technical Tidal-Stream Energy Resource off Massachusetts, USA

NASA Astrophysics Data System (ADS)

Cowles, G. W.; Hakim, A.; Churchill, J. H.

2016-02-01

Tidal in-stream energy conversion (TISEC) facilities provide a highly predictable and dependable source of energy. Given the economic and social incentives to migrate towards renewable energy sources there has been tremendous interest in the technology. Key challenges to the design process stem from the wide range of problem scales extending from device to array. In the present approach we apply a multi-model approach to bridge the scales of interest and select optimal device geometries to estimate the technical resource for several realistic sites in the coastal waters of Massachusetts, USA. The approach links two computational models. To establish flow conditions at site scales ( 10m), a barotropic setup of the unstructured grid ocean model FVCOM is employed. The model is validated using shipboard and fixed ADCP as well as pressure data. For device scale, the structured multiblock flow solver SUmb is selected. A large ensemble of simulations of 2D cross-flow tidal turbines is used to construct a surrogate design model. The surrogate model is then queried using velocity profiles extracted from the tidal model to determine the optimal geometry for the conditions at each site. After device selection, the annual technical yield of the array is evaluated with FVCOM using a linear momentum actuator disk approach to model the turbines. Results for several key Massachusetts sites including comparison with theoretical approaches will be presented.

Charles Morris's Semiotic Model and Analytical Studies of Visual and Verbal Representations in Technical Communication

ERIC Educational Resources Information Center

Fan, Jiang-Ping

2006-01-01

In this article, the author demonstrates that the semiotic model proposed by Charles Morris enables us to optimize our understanding of technical communication practices and provides a good point of inquiry. To illustrate this point, the author exemplifies the semiotic approaches by scholars in technical communication and elaborates Morris's model…

Mechanistic approach to generalized technical analysis of share prices and stock market indices

NASA Astrophysics Data System (ADS)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

Technical architecture of ONC-approved plans for statewide health information exchange.

PubMed

Barrows, Randolph C; Ezzard, John

2011-01-01

ONC-approved state plans for HIE were reviewed for descriptions and depictions of statewide HIE technical architecture. Review was complicated by non-standard organizational elements and technical terminology across state plans. Findings were mapped to industry standard, referenced, and defined HIE architecture descriptions and characteristics. Results are preliminary due to the initial subset of ONC-approved plans available, the rapid pace of new ONC-plan approvals, and continuing advancements in standards and technology of HIE, etc. Review of 28 state plans shows virtually all include a direct messaging component, but for participating entities at state-specific levels of granularity (RHIO, enterprise, organization/provider). About ½ of reviewed plans describe a federated architecture, and ¼ of plans utilize a single-vendor "hybrid-federated" architecture. About 1/3 of states plan to leverage new federal and open exchange technologies (DIRECT, CONNECT, etc.). Only one plan describes a centralized architecture for statewide HIE, but others combine central and federated architectural approaches.

Technical Architecture of ONC-Approved Plans For Statewide Health Information Exchange

PubMed Central

Barrows, Randolph C.; Ezzard, John

2011-01-01

ONC-approved state plans for HIE were reviewed for descriptions and depictions of statewide HIE technical architecture. Review was complicated by non-standard organizational elements and technical terminology across state plans. Findings were mapped to industry standard, referenced, and defined HIE architecture descriptions and characteristics. Results are preliminary due to the initial subset of ONC-approved plans available, the rapid pace of new ONC-plan approvals, and continuing advancements in standards and technology of HIE, etc. Review of 28 state plans shows virtually all include a direct messaging component, but for participating entities at state-specific levels of granularity (RHIO, enterprise, organization/provider). About ½ of reviewed plans describe a federated architecture, and ¼ of plans utilize a single-vendor “hybrid-federated” architecture. About 1/3 of states plan to leverage new federal and open exchange technologies (DIRECT, CONNECT, etc.). Only one plan describes a centralized architecture for statewide HIE, but others combine central and federated architectural approaches. PMID:22195059

TECHNICAL REPORTS DATABASE

EPA Science Inventory

The Defense Technical Information Center (DTIC?) is the central facility for the collection and dissemination of scientific and technical information for the Department of Defense (DoD). Much of this information is made available by DTIC in the form of technical reports about com...

Advanced Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Technical Exchange Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis

2013-09-01

During FY13, the INL developed an advanced SMR PRA framework which has been described in the report Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Technical Framework Specification, INL/EXT-13-28974 (April 2013). In this framework, the various areas are considered: Probabilistic models to provide information specific to advanced SMRs Representation of specific SMR design issues such as having co-located modules and passive safety features Use of modern open-source and readily available analysis methods Internal and external events resulting in impacts to safety All-hazards considerations Methods to support the identification of design vulnerabilities Mechanistic and probabilistic data needs to support modelingmore » and tools In order to describe this framework more fully and obtain feedback on the proposed approaches, the INL hosted a technical exchange meeting during August 2013. This report describes the outcomes of that meeting.« less

Theoretical Aspects of the Patterns Recognition Statistical Theory Used for Developing the Diagnosis Algorithms for Complicated Technical Systems

NASA Astrophysics Data System (ADS)

Obozov, A. A.; Serpik, I. N.; Mihalchenko, G. S.; Fedyaeva, G. A.

2017-01-01

In the article, the problem of application of the pattern recognition (a relatively young area of engineering cybernetics) for analysis of complicated technical systems is examined. It is shown that the application of a statistical approach for hard distinguishable situations could be the most effective. The different recognition algorithms are based on Bayes approach, which estimates posteriori probabilities of a certain event and an assumed error. Application of the statistical approach to pattern recognition is possible for solving the problem of technical diagnosis complicated systems and particularly big powered marine diesel engines.

Satellite power system concept development and evaluation program system definition technical assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-12-01

The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW ofmore » electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.« less

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP AUTOMOTIVE REPAIR SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP METAL FINISHING SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

Bridging the Gap Between the Social and the Technical: The Enrolment of Socio-Technical Information Architects to Cope with the Two-Level Model of EPR Systems.

PubMed

Pedersen, Rune

2017-01-01

This is a project proposal derived from an urge to re-define the governance of ICT in healthcare towards regional and national standardization of the patient pathways. The focus is on a two-levelled approach for governing EPR systems where the clinicians' model structured variables and patient pathways. The overall goal is a patient centric EPR portfolio. This paper define and enlighten the need for establishing the socio- technical architect role necessary to obtain the capabilities of a modern structured EPR system. Clinicians are not capable to moderate between the technical and the clinical.

Reliability Modeling Methodology for Independent Approaches on Parallel Runways Safety Analysis

NASA Technical Reports Server (NTRS)

Babcock, P.; Schor, A.; Rosch, G.

1998-01-01

This document is an adjunct to the final report An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies. That report presents the results of our analysis of the problem of simultaneous but independent, approaches of two aircraft on parallel runways (independent approaches on parallel runways, or IAPR). This introductory chapter presents a brief overview and perspective of approaches and methodologies for performing safety analyses for complex systems. Ensuing chapter provide the technical details that underlie the approach that we have taken in performing the safety analysis for the IAPR concept.

Successful technical trading agents using genetic programming.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Othling, Andrew S.; Kelly, John A.; Pryor, Richard J.

2004-10-01

Genetic programming (GP) has proved to be a highly versatile and useful tool for identifying relationships in data for which a more precise theoretical construct is unavailable. In this project, we use a GP search to develop trading strategies for agent based economic models. These strategies use stock prices and technical indicators, such as the moving average convergence/divergence and various exponentially weighted moving averages, to generate buy and sell signals. We analyze the effect of complexity constraints on the strategies as well as the relative performance of various indicators. We also present innovations in the classical genetic programming algorithm thatmore » appear to improve convergence for this problem. Technical strategies developed by our GP algorithm can be used to control the behavior of agents in economic simulation packages, such as ASPEN-D, adding variety to the current market fundamentals approach. The exploitation of arbitrage opportunities by technical analysts may help increase the efficiency of the simulated stock market, as it does in the real world. By improving the behavior of simulated stock markets, we can better estimate the effects of shocks to the economy due to terrorism or natural disasters.« less

American Studies and the Technical Curriculum: Man and Technology.

ERIC Educational Resources Information Center

St. Germain, Amos

An approach to teaching American studies at a Southern institute of engineering technology is described. The curriculum of this school is technically oriented to the professional engineer. Elective humanities courses must attract their own market and justify their places to both the students and the faculty. Two courses entitled "Man and…

A systematic assessment of normalization approaches for the Infinium 450K methylation platform.

PubMed

Wu, Michael C; Joubert, Bonnie R; Kuan, Pei-fen; Håberg, Siri E; Nystad, Wenche; Peddada, Shyamal D; London, Stephanie J

2014-02-01

The Illumina Infinium HumanMethylation450 BeadChip has emerged as one of the most popular platforms for genome wide profiling of DNA methylation. While the technology is wide-spread, systematic technical biases are believed to be present in the data. For example, this array incorporates two different chemical assays, i.e., Type I and Type II probes, which exhibit different technical characteristics and potentially complicate the computational and statistical analysis. Several normalization methods have been introduced recently to adjust for possible biases. However, there is considerable debate within the field on which normalization procedure should be used and indeed whether normalization is even necessary. Yet despite the importance of the question, there has been little comprehensive comparison of normalization methods. We sought to systematically compare several popular normalization approaches using the Norwegian Mother and Child Cohort Study (MoBa) methylation data set and the technical replicates analyzed with it as a case study. We assessed both the reproducibility between technical replicates following normalization and the effect of normalization on association analysis. Results indicate that the raw data are already highly reproducible, some normalization approaches can slightly improve reproducibility, but other normalization approaches may introduce more variability into the data. Results also suggest that differences in association analysis after applying different normalizations are not large when the signal is strong, but when the signal is more modest, different normalizations can yield very different numbers of findings that meet a weaker statistical significance threshold. Overall, our work provides useful, objective assessment of the effectiveness of key normalization methods.

A Standards-Based Approach for Reporting Assessment Results in South Africa

ERIC Educational Resources Information Center

Kanjee, Anil; Moloi, Qetelo

2016-01-01

This article proposes the use of a standards-based approach to reporting results from large-scale assessment surveys in South Africa. The use of this approach is intended to address the key shortcomings observed in the current reporting framework prescribed in the national curriculum documents. Using the Angoff method and data from the Annual…

A network of autonomous surface ozone monitors in Antarctica: technical description and first results

NASA Astrophysics Data System (ADS)

Bauguitte, S. J.; Brough, N.; Frey, M. M.; Jones, A. E.; Roscoe, H. K.; Wolff, E. W.

2009-12-01

Concentrations of surface ozone over polar regions cannot be derived from satellite data so can only be studied from ground-based platforms. To understand the regional picture a carefully-designed network of ground-based monitors is required. Here we report on a network of 10 autonomous ozone monitors that was established around the Weddell Sea sector of coastal Antarctica with a transect up onto the Antarctic Plateau during the International Polar Year. The aim was to measure for a full year, thus gaining a much-improved broader view of boundary layer ozone seasonality at different locations as well as on factors affecting the budget of surface ozone in Antarctica. Of specific interest were the balance between halogen-driven destruction and photochemical production from snow-emitted precursors, as well as the spatial extent of ozone depletion events. Each ozone monitor measured successfully within its predefined duty cycle throughout the year, with some differences in performance dependent on power availability. Here we present technical information and first results from the network.

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

Legitimizing Technical Communication in English Departments: Carolyn Miller's "Humanistic Rationale for Technical Writing"

ERIC Educational Resources Information Center

Moore, Patrick

2006-01-01

Carolyn Miller's oft-cited "Humanistic Rationale for Technical Writing," published in 1979, tries to give technical communication faculty more cultural capital in English departments controlled by literature professors. Miller replaces a positivistic emphasis in technical communication pedagogy with rhetoric. She shows how technical knowledge is…

An Evaluation of Selected NASA Scientific and Technical Information Products: Results of a Pilot Study.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; Glassman, Myron

A pilot study was conducted to evaluate selected NASA (National Aeronautics and Space Administration) scientific and technical information (STI) products. The study, which utilized survey research in the form of a self-administered mail questionnaire, had a two-fold purpose--to gather baseline data on the use and perceived usefulness of selected…

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

Analysis Influence of Managerial Competence, Technical Competence, and Strategic Competence on Firm Performance in Electrical Engineering Company in Bandung

NASA Astrophysics Data System (ADS)

Wijaya, E. R.; Irianto, D.

2018-03-01

The industry sectors that have an important role in the era of globalization is the electro engineering sector. The era of globalization led to intense competition. One of the negative effects of the intense competition is declining profits. Drop in profits caused many firms reduces their employees without seeking the root cause of declining profits in detail. Whereas, employee is the important resources to maintain competitive advantage. Competitive advantage can be measured by the performance of which is owned by the firm. The firm's performance can be formed of competencies that is unique, rare, irreplaceable, and difficult to imitate within the firm, one of them is the competence of the individual. According to a competency-based approach and the resource- based approach, individual competence that affect the performance of the firm is managerial competence, technical competence, and strategic competence. Questionnaire is built based on the dimensions of the firm's performance, managerial competence, technical competence, and strategic competence, are processed using partial least squares application. The results indicate that managerial competence negatively impact firm’s performance with weak ties. The technical competence and strategic competence positively affect firm’s performance with moderate ties.

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

Developing Knowledge Creating Technical Education Institutions through the Voice of Teachers: Content Analysis Approach

ERIC Educational Resources Information Center

Song, Ji Hoon; Kim, Hye Kyoung; Park, Sunyoung; Bae, Sang Hoon

2014-01-01

The purpose of this study was to develop an empirical data-driven model for a knowledge creation school system in career technical education (CTE) by identifying supportive and hindering factors influencing knowledge creation practices in CTE schools. Nonaka and colleagues' (Nonaka & Konno, 1998; Nonaka & Takeuchi, 1995) knowledge…

Technical Adequacy of the easyCBM Primary-Level Mathematics Measures (Grades K-2), 2009-2010 Version. Technical Report #1006

ERIC Educational Resources Information Center

Anderson, Daniel; Lai, Cheng-Fei; Nese, Joseph F. T.; Park, Bitnara Jasmine; Saez, Leilani; Jamgochian, Elisa; Alonzo, Julie; Tindal, Gerald

2010-01-01

In the following technical report, we present evidence of the technical adequacy of the easyCBM[R] math measures in grades K-2. In addition to reliability information, we present criterion-related validity evidence, both concurrent and predictive, and construct validity evidence. The results represent data gathered throughout the 2009/2010 school…

The Care of Our Hybrid Selves: Ethics in Times of Technical Mediation.

PubMed

Dorrestijn, Steven

2017-01-01

What can the art of living after Foucault contribute to ethics in relation to the mediation of human existence by technology? To develop the relation between technical mediation and ethics, firstly the theme of technical mediation is elaborated in line with Foucault's notion of ethical problematization. Every view of what technology does to us at the same time expresses an ethical concern about technology. The contemporary conception of technical mediation tends towards the acknowledgement of ongoing hybridization, not ultimately good or bad but ambivalent, which means for us the challenge of taking care of ourselves as hybrid beings. Secondly, the work of Foucault provides elements for imagining this care for our hybrid selves, notably his notions of freedom as a practice and of the care of the self. A conclusions about technical mediation and ethics is that whereas the approaches of the delegation of morality to technology by Latour and mediated morality by Verbeek see technical mediation of behavior and moral outlook as an answer in ethics, this should rather be considered the problem that ethics is about.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

PubMed

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

A technical case report on use of tubular retractors for anterior cervical spine surgery.

PubMed

Kulkarni, Arvind G; Patel, Ankit; Ankith, N V

2017-12-19

The authors put-forth this technical report to establish the feasibility of performing an anterior cervical corpectomy and fusion (ACCF) and a two-level anterior cervical discectomy and fusion (ACDF) using a minimally invasive approach with tubular retractors. First case: cervical spondylotic myelopathy secondary to a large postero-inferiorly migrated disc treated with corpectomy and reconstruction with a mesh cage and locking plate. Second case: cervical disc herniation with radiculopathy treated with a two-level ACDF. Both cases were operated with minimally invasive approach with tubular retractor using a single incision. Technical aspects and clinical outcomes have been reported. No intra or post-operative complications were encountered. Intra-operative blood loss was negligible. The patients had a cosmetic scar on healing. Standard procedure of placement of tubular retractors is sufficient for adequate surgical exposure with minimal invasiveness. Minimally invasive approach to anterior cervical spine with tubular retractors is feasible. This is the first report on use of minimally invasive approach for ACCF and two-level ACDF.

[Regional electro-hyperthermia--technical principles, clinical results and health insurance aspects].

PubMed

Heyll, Uwe

2012-06-01

The method of electro-hyperthermia is based on the production of alternating currents from capacitive coupled electrodes. Because of the associated heating of body tissues, the electro-hyperthermia is promoted as an alternative to the more sophisticated methods of scientific hyperthermia, which find use in oncologic diseases. The analysis of technical data, however, reveals that the electro-hyperthermia is not qualified for a focused, effective and therapeutically useful heating of circumscribed target areas. Data from clinical studies demonstrating efficacy for defined indications are not available. The application of electro-hyperthermia is excluded form the German system of public health insurance. As proof of medical necessity cannot be provided, there is also no claim for reimbursement from private health insurance. According to legal regulations in Germany, an invoice as hyperthermia treatment is usually not possible. Rather, an item from the electrotherapy section of the official provision of medical fees (GOA) has to be chosen.

Health Related Occupations. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in health related occupations. A three-phase…

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM Dissemination of Program Results § 296.32 Technical and educational services. (a) Under...

Removal of an orbital apex hemangioma using an endoscopic transethmoidal approach: technical note.

PubMed

Karaki, Masayuki; Kobayashi, Ryuichi; Mori, Nozomu

2006-07-01

The posterior orbit contains a number of important and vulnerable structures, including the optic nerve, the ophthalmic artery and vein, and the ocular muscles and their motor nerves, which makes surgical access to the lesion in this region quite difficult. Transfrontal, transfrontal-ethmoidal, and transmaxillary procedures have the disadvantage of possible injuries to a number of nontumor structures, whereas an endoscopic transethmoidal approach is a minimally invasive surgery for the retrobulbar lesions. Retrobulbar cavernous hemangioma was successfully removed by a transethmoidal approach. Tumor removal was performed in a patient with an intraconal cavernous hemangioma of approximately 15 mm in diameter. By a transethmoidal approach, the medial-inferior part of the orbit, as well as the apex of the orbit, were clearly visualized after endonasal ethmoidectomy. After the removal of the medial orbital bone, the orbital periosteum was incised and elevated. By elevating the orbital fat, the tumor could be identified separately from the orbital contents. Cavernous hemangioma at the orbital apex was removed without complications. An endoscopic transethmoidal approach, which requires no skin incision, is a minimally invasive surgery for retrobulbar orbital tumor, leading to excellent cosmetic results with less bleeding.

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

PubMed

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

ERIC Educational Resources Information Center

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

Technical Approach for Determining Key Parameters Needed for Modeling the Performance of Cast Stone for the Integrated Disposal Facility Performance Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yabusaki, Steven B.; Serne, R. Jeffrey; Rockhold, Mark L.

2015-03-30

Washington River Protection Solutions (WRPS) and its contractors at Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) are conducting a development program to develop / refine the cementitious waste form for the wastes treated at the ETF and to provide the data needed to support the IDF PA. This technical approach document is intended to provide guidance to the cementitious waste form development program with respect to the waste form characterization and testing information needed to support the IDF PA. At the time of the preparation of this technical approach document, the IDF PA effort is justmore » getting started and the approach to analyze the performance of the cementitious waste form has not been determined. Therefore, this document looks at a number of different approaches for evaluating the waste form performance and describes the testing needed to provide data for each approach. Though the approach addresses a cementitious secondary aqueous waste form, it is applicable to other waste forms such as Cast Stone for supplemental immobilization of Hanford LAW. The performance of Cast Stone as a physical and chemical barrier to the release of contaminants of concern (COCs) from solidification of Hanford liquid low activity waste (LAW) and secondary wastes processed through the Effluent Treatment Facility (ETF) is of critical importance to the Hanford Integrated Disposal Facility (IDF) total system performance assessment (TSPA). The effectiveness of cementitious waste forms as a barrier to COC release is expected to evolve with time. PA modeling must therefore anticipate and address processes, properties, and conditions that alter the physical and chemical controls on COC transport in the cementitious waste forms over time. Most organizations responsible for disposal facility operation and their regulators support an iterative hierarchical safety/performance assessment approach with a general philosophy that modeling

Alternative Significant Contribution Approaches Evaluated

EPA Pesticide Factsheets

This Technical Support Document (TSD) discusses alternative approaches that EPA evaluated for defining emissions that constitute each upwind state’s significant contribution to nonattainment and interference with maintenance downwind.

Interpretive Discourse and Other Models from Communication Studies: Expanding the Values of Technical Communication

ERIC Educational Resources Information Center

Williams, Sean D.

2010-01-01

This article argues that in spite of some attempts to expand the diversity of approaches in Technical Communication, the field remains rooted in an expedient, managerial, techno-rational discourse, where discourse is understood as the values that guide research, practice, and teaching. The article draws on approaches from Communication Studies,…

The "Technical and Vocational Education Initiative": Enclaves in British Schools.

ERIC Educational Resources Information Center

Saunders, Murray

The Technical and Vocational Education Initiative (TVEI) is intended as a pilot, on a massive scale, of particular approaches, with a systematic need to identify TVEI effects on students, staff, resources, and curricula. TVEI has a strong tendency toward the development of pilot enclaves in terms of its administrative, curricular,…

National Alliance for Advanced Biofuels and Bio-Products Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olivares, Jose A.; Baxter, Ivan; Brown, Judith

2014-09-30

The main objective of NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. The approach was to address technology development across the entire value chain of algal biofuels production, from selection of strains to cultivation, harvesting, extraction, fuel conversion, and agricultural coproduct production. Sustainable practices and financial feasibility assessments ununderscored the approach and drove the technology development.

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

Book Review: New Perspectives on Technical Editing

NASA Astrophysics Data System (ADS)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

Fully laparoscopic left hepatectomy - a technical reference proposed for standard practice compared to the open approach: a retrospective propensity score model.

PubMed

Valente, Roberto; Sutcliffe, Robert; Levesque, Eric; Costa, Mara; De' Angelis, Nicola; Tayar, Claude; Cherqui, Daniel; Laurent, Alexis

2018-04-01

Laparoscopic left hemihepatectomy (LLH) may be an alternative to open (OLH). There are several original variations in the technical aspects of LLH, and no accepted standard. The aim of this study is to assess the safety and effectiveness of the technique developed at Henri Mondor Hospital since 1996. The technique of LLH was conceived for safety and training of two mature generations of lead surgeons. The technique includes full laparoscopy, ventral approach to the common trunk, extrahepatic pedicle dissection, CUSA ® parenchymal transection, division of the left hilar plate laterally to the Arantius ligament, and ventral transection of the left hepatic vein. The outcomes of LLH and OLH were compared. Perioperative analysis included intra- and postoperative, and histology variables. Propensity Score Matching was undertaken of background covariates including age, ASA, BMI, fibrosis, steatosis, tumour size, and specimen weight. 17 LLH and 51 OLH were performed from 1996 to 2014 with perioperative mortality rates of 0% and 6%, respectively. In the LLH group, two patients underwent conversion to open surgery. Propensity matching selected 10 LLH/OLH pairs. The LLH group had a higher proportion of procedures for benign disease. LLH was associated with longer operating time and less blood loss. Perioperative complications occurred in 30% (LLH) and 10% (OLH) (p = 1). Mortality and ITU stay were similar. This technique is recommended as a possible technical reference for standard LLH. Copyright © 2017 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.

The Native Telehealth Outreach and Technical Assistance Program: a community-based approach to the development of multimedia-focused health care information.

PubMed

Dick, Rhonda Wiegman; Manson, Spero M; Hansen, Amy L; Huggins, Annie; Trullinger, Lori

2007-01-01

The development and dissemination of culturally relevant health care information has traditionally taken a "top-down" approach. Governmental funding agencies and research institutions have too often dictated the importance and focus of health-related research and information dissemination. In addition, the digital divide has affected rural communities in such a way that their members often do not possess the knowledge or experience necessary to use technological resources. And, even when they do, their skills may be limited, adequate only for implementing applications and programs designed by others who live and work outside of these communities. This need became the driving force in the creation of the Native Telehealth Outreach and Technical Assistance Program. The goal of the program is to equip Native community members, at both the lay and professional levels, with the means to use technology to address tribal health care needs. The transfer of relevant technical knowledge and skills enables participants to develop projects which enhance the community-wide dissemination of health care information. Nine community health advocates and professionals participated in the initial cohort. Eight of the participants successfully developed multimedia-based projects including Web sites, interactive CD-ROMs, and video focusing on a variety of health concerns. At the conclusion of the 18-month program period, projects were disseminated throughout rural communities. The NTOTAP staff continues to evaluate the use of these projects and their benefits within the rural communities.

2013 Technical Roundtable

EPA Pesticide Factsheets

On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

Information support of monitoring of technical condition of buildings in construction risk area

NASA Astrophysics Data System (ADS)

Skachkova, M. E.; Lepihina, O. Y.; Ignatova, V. V.

2018-05-01

The paper presents the results of the research devoted to the development of a model of information support of monitoring buildings technical condition; these buildings are located in the construction risk area. As a result of the visual and instrumental survey, as well as the analysis of existing approaches and techniques, attributive and cartographic databases have been created. These databases allow monitoring defects and damages of buildings located in a 30-meter risk area from the object under construction. The classification of structures and defects of these buildings under survey is presented. The functional capabilities of the developed model and the field of it practical applications are determined.

Technical Desiderata for the Integration of Genomic Data into Electronic Health Records

PubMed Central

Masys, Daniel R.; Jarvik, Gail P.; Abernethy, Neil F.; Anderson, Nicholas R.; Papanicolaou, George J.; Paltoo, Dina N.; Hoffman, Mark A.; Kohane, Isaac S.; Levy, Howard P.

2012-01-01

The era of “Personalized Medicine,” guided by individual molecular variation in DNA, RNA, expressed proteins and other forms of high volume molecular data brings new requirements and challenges to the design and implementation of Electronic Health Records (EHRs). In this article we describe the characteristics of biomolecular data that differentiate it from other classes of data commonly found in EHRs, enumerate a set of technical desiderata for its management in healthcare settings, and offer a candidate technical approach to its compact and efficient representation in operational systems. PMID:22223081

Creating an Environmental Justice Framework for Policy Change in Childhood Asthma: A Grassroots to Treetops Approach

PubMed Central

Sargent, Katherine; Arons, Abigail; Standish, Marion; Brindis, Claire D.

2011-01-01

Objectives. The Community Action to Fight Asthma Initiative, a network of coalitions and technical assistance providers in California, employed an environmental justice approach to reduce risk factors for asthma in school-aged children. Policy advocacy focused on housing, schools, and outdoor air quality. Technical assistance partners from environmental science, policy advocacy, asthma prevention, and media assisted in advocacy. An evaluation team assessed progress and outcomes. Methods. A theory of change and corresponding logic model were used to document coalition development and successes. Site visits, surveys, policymaker interviews, and participation in meetings documented the processes and outcomes. Quantitative and qualitative data were analyzed to assess strategies, successes, and challenges. Results. Coalitions, working with community residents and technical assistance experts, successfully advocated for policies to reduce children's exposures to environmental triggers, particularly in low-income communities and communities of color. Policies were implemented at various levels. Conclusions. Environmental justice approaches to policy advocacy could be an effective strategy to address inequities across communities. Strong technical assistance, close community involvement, and multilevel strategies were all essential to effective policies to reduce environmental inequities. PMID:21836108

Building Communities of Engineers to Share Technical Expertise

NASA Technical Reports Server (NTRS)

Topousis, Daria E.; Dennehy, Cornelius J.; Fesq, Lorraine M.

2012-01-01

Developed by the core community to describe our vision of an approach to ensure a sufficiently technically advanced and affordable AR&D technology base is available to support future NASA missions. The goal of this strategy is to create an environment exploiting reusable technology elements for an AR&D system design and development process which is: a) Lower-Risk. b) More Versatile/Scalable. c) Reliable & Crew-Safe. d) More Affordable.

Assessing Technical Training Needs.

ERIC Educational Resources Information Center

Schwaller, Anthony E.; Slipy, Dave

1985-01-01

Describes the results of a joint project of St. Cloud State University (Minnesota) and DeZURIK Corporation (a manufacturer and distributor of industrial valves) which developed and implemented a technical training needs questionnaire for use with the company's employees. Student involvement in the process is noted. (MBR)

Managing Technical and Cost Uncertainties During Product Development in a Simulation-Based Design Environment

NASA Technical Reports Server (NTRS)

Karandikar, Harsh M.

1997-01-01

An approach for objective and quantitative technical and cost risk analysis during product development, which is applicable from the earliest stages, is discussed. The approach is supported by a software tool called the Analytical System for Uncertainty and Risk Estimation (ASURE). Details of ASURE, the underlying concepts and its application history, are provided.

Technical Note: Experimental results from a prototype high-field inline MRI-linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liney, G. P., E-mail: gary.liney@sswahs.nsw.gov.au

Purpose: The pursuit of real-time image guided radiotherapy using optimal tissue contrast has seen the development of several hybrid magnetic resonance imaging (MRI)-treatment systems, high field and low field, and inline and perpendicular configurations. As part of a new MRI-linac program, an MRI scanner was integrated with a linear accelerator to enable investigations of a coupled inline MRI-linac system. This work describes results from a prototype experimental system to demonstrate the feasibility of a high field inline MR-linac. Methods: The magnet is a 1.5 T MRI system (Sonata, Siemens Healthcare) was located in a purpose built radiofrequency (RF) cage enablingmore » shielding from and close proximity to a linear accelerator with inline (and future perpendicular) orientation. A portable linear accelerator (Linatron, Varian) was installed together with a multileaf collimator (Millennium, Varian) to provide dynamic field collimation and the whole assembly built onto a stainless-steel rail system. A series of MRI-linac experiments was performed to investigate (1) image quality with beam on measured using a macropodine (kangaroo) ex vivo phantom; (2) the noise as a function of beam state measured using a 6-channel surface coil array; and (3) electron contamination effects measured using Gafchromic film and an electronic portal imaging device (EPID). Results: (1) Image quality was unaffected by the radiation beam with the macropodine phantom image with the beam on being almost identical to the image with the beam off. (2) Noise measured with a surface RF coil produced a 25% elevation of background intensity when the radiation beam was on. (3) Film and EPID measurements demonstrated electron focusing occurring along the centerline of the magnet axis. Conclusions: A proof-of-concept high-field MRI-linac has been built and experimentally characterized. This system has allowed us to establish the efficacy of a high field inline MRI-linac and study a number of the

Technical Evaluation Motor No. 10 (TEM-10)

NASA Technical Reports Server (NTRS)

1993-01-01

Technical Evaluation Motor No. 10 (TEM-10) was static fired on 27 Apr. 1993 at the Thiokol Corporation full-scale motor static test bay, T-24. This final test report documents the procedures, performance, and results of the static test firing of TEM-10. All observations, discussions, conclusions, and recommendations contained are final. Included is a presentation and discussion of TEM-10 performance, anomalies, and test results in concurrence with the objectives outlined in CTP-0110, Revision D, Space Shuttle Technical Evaluation Motor No. 10 (TEM-10) Static Fire Test Plan.

Moving towards Ethnorelativism: A Framework for Measuring and Meeting Students' Needs in Cross-Cultural Business and Technical Communication

ERIC Educational Resources Information Center

Wang, Junhua

2013-01-01

Scholars in business and technical communication have continuously made efforts to look for effective teaching approaches for cross-cultural business and technical communication; however, little research has been conducted to study the process by which students develop intercultural competence; fewer studies have been conducted to assess learners'…

Engineering and Industrial Fields. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in engineering and industrial fields. A…

Agriculture and Related Businesses. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in agriculture and related businesses. A…

Optimizing the NASA Technical Report Server

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maa, Ming-Hokng

1996-01-01

The NASA Technical Report Server (NTRS), a World Wide Web report distribution NASA technical publications service, is modified for performance enhancement, greater protocol support, and human interface optimization. Results include: Parallel database queries, significantly decreasing user access times by an average factor of 2.3; access from clients behind firewalls and/ or proxies which truncate excessively long Uniform Resource Locators (URLs); access to non-Wide Area Information Server (WAIS) databases and compatibility with the 239-50.3 protocol; and a streamlined user interface.

PRA in Design: Increasing Confidence in Pre-Operational Assessments of Risks (Results of a Joint NASA/NRC Workshop)

NASA Technical Reports Server (NTRS)

Youngblood, Robert; Dezfuli, Homayoon; Siu, Nathan

2010-01-01

In late 2009, the National Aeronautics and Space Administration (NASA) and the U.S. Nuclear Regulatory Commission (NRC) jointly organized a workshop to discuss technical issues associated with application of risk assessments to early phases of system design. The workshop, which was coordinated by the Idaho National Laboratory, involved invited presentations from a number of PRA experts in the aerospace and nuclear fields and subsequent discussion to address the following questions: (a) What technical issues limit decision-makers' confidence in PRA results, especially at a pre-operational phase of the system life cycle? (b) What is being done to address these issues'? (c) What more can be done ? The workshop resulted in participant observations and suggestions on several technical issues, including the pursuit of non-traditional approaches to risk assessment and the verification and validation of risk models. The workshop participants also identified several important non-technical issues, including risk communication with decision makers, and the integration of PRA into the overall design process.

Technical report writing

NASA Technical Reports Server (NTRS)

Vidoli, Carol A.

1992-01-01

This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

Technical and scale efficiency in the delivery of child health services in Zambia: results from data envelopment analysis.

PubMed

Achoki, Tom; Hovels, Anke; Masiye, Felix; Lesego, Abaleng; Leufkens, Hubert; Kinfu, Yohannes

2017-01-05

Despite tremendous efforts to scale up key maternal and child health interventions in Zambia, progress has not been uniform across the country. This raises fundamental health system performance questions that require further investigation. Our study investigates technical and scale efficiency (SE) in the delivery of maternal and child health services in the country. The study focused on all 72 health districts of Zambia. We compiled a district-level database comprising health outcomes (measured by the probability of survival to 5 years of age), health outputs (measured by coverage of key health interventions) and a set of health system inputs, namely, financial resources and human resources for health, for the year 2010. We used data envelopment analysis to assess the performance of subnational units across Zambia with respect to technical and SE, controlling for environmental factors that are beyond the control of health system decision makers. Nationally, average technical efficiency with respect to improving child survival was 61.5% (95% CI 58.2% to 64.8%), which suggests that there is a huge inefficiency in resource use in the country and the potential to expand services without injecting additional resources into the system. Districts that were more urbanised and had a higher proportion of educated women were more technically efficient. Improved cooking methods and donor funding had no significant effect on efficiency. With the pressing need to accelerate progress in population health, decision makers must seek efficient ways to deliver services to achieve universal health coverage. Understanding the factors that drive performance and seeking ways to enhance efficiency offer a practical pathway through which low-income countries could improve population health without necessarily seeking additional resources. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Promoting Creative Thinking Ability Using Contextual Learning Model in Technical Drawing Achievement

NASA Astrophysics Data System (ADS)

Mursid, R.

2018-02-01

The purpose of this study is to determine whether there is influence; the differences in the results between students that learn drawing techniques taught by the Contextual Innovative Model (CIM) and taught by Direct Instructional Model (DIM), the differences in achievement among students of technical drawing that have High Creative Thinking Ability (HCTA) with Low Creative Thinking Ability (LCTA), and the interaction between the learning model with the ability to think creatively to the achievement technical drawing. Quasi-experimental research method. Results of research appoint that: the achievement of students that learned technical drawing by using CIM is higher than the students that learned technical drawing by using DIM, the achievement of students of technical drawings HCTA is higher than the achievement of students who have technical drawing LCTA, and there are interactions between the use of learning models and creative thinking abilities in influencing student achievement technical drawing.

1980 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1981-01-01

Offers resources on technical writing that were published in 1980. Arranges the citations under 12 categories: bibliographies, books, reviews, and articles on theory and philosophy; pedagogy; writing technical articles and reports; research; technical writing and the computer; graphic/visual aids; correspondence; technical speech; and designing…

1981 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1982-01-01

Offers resources on technical writing published in 1981. Arranges the citations under the following categories: bibliographies, books, reviews, and articles on the profession; theory and philosophy; pedagogy; technical speech; research; designing degree programs; technical writing and the computer; writing technical articles and reports;…

Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?-A Systematic Review of Intervention Studies.

PubMed

Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

2018-03-09

The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE ® /PubMed ® , EMBASE ® , Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL ® ) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68-0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low.

The role of socio-technical principles in leveraging meaningful benefits from IT investments.

PubMed

Doherty, Neil F

2014-03-01

In recent years there has been a great deal of academic and practitioner interest in the role of 'benefits realisation management' [BRM] approaches, as a means of proactively leveraging value from IT investments. This growing body of work owes a very considerable, but as yet unacknowledged, debt to the work of Ken Eason, and other early socio-technical theorists. Consequently, the aim of this paper is to demonstrate, using the literature, how many of the principles, practices and techniques of BRM have evolved either directly or indirectly from socio-technical approaches to systems design. In so doing, this article makes a further important contribution to the literature by explicitly identifying the underlying principles and key practices of benefits realisation management. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities.

PubMed

Cho, Il-Hoon; Ku, Seockmo

2017-09-30

The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods). Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Training the Technical Editor.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

The demand for skilled technical editors is growing as society places increasing emphasis on receiving accurate, concise, and complete technical data. Since many organizations do not have inhouse programs for training technical editors, a need exists to provide inexperienced people with basic editing skills. One organization has developed two…

An optimized web-based approach for collaborative stereoscopic medical visualization

PubMed Central

Kaspar, Mathias; Parsad, Nigel M; Silverstein, Jonathan C

2013-01-01

Objective Medical visualization tools have traditionally been constrained to tethered imaging workstations or proprietary client viewers, typically part of hospital radiology systems. To improve accessibility to real-time, remote, interactive, stereoscopic visualization and to enable collaboration among multiple viewing locations, we developed an open source approach requiring only a standard web browser with no added client-side software. Materials and Methods Our collaborative, web-based, stereoscopic, visualization system, CoWebViz, has been used successfully for the past 2 years at the University of Chicago to teach immersive virtual anatomy classes. It is a server application that streams server-side visualization applications to client front-ends, comprised solely of a standard web browser with no added software. Results We describe optimization considerations, usability, and performance results, which make CoWebViz practical for broad clinical use. We clarify technical advances including: enhanced threaded architecture, optimized visualization distribution algorithms, a wide range of supported stereoscopic presentation technologies, and the salient theoretical and empirical network parameters that affect our web-based visualization approach. Discussion The implementations demonstrate usability and performance benefits of a simple web-based approach for complex clinical visualization scenarios. Using this approach overcomes technical challenges that require third-party web browser plug-ins, resulting in the most lightweight client. Conclusions Compared to special software and hardware deployments, unmodified web browsers enhance remote user accessibility to interactive medical visualization. Whereas local hardware and software deployments may provide better interactivity than remote applications, our implementation demonstrates that a simplified, stable, client approach using standard web browsers is sufficient for high quality three

Distance Learning Success--A Perspective from Socio-Technical Systems Theory

ERIC Educational Resources Information Center

Wang, Jianfeng; Solan, David; Ghods, Abe

2010-01-01

With widespread adoption of computer-based distance education as a mission-critical component of the institution's educational program, the need for evaluation has emerged. In this research, we aim to expand on the systems approach by offering a model for evaluation based on socio-technical systems theory addressing a stated need in the literature…

Technical Findings, Lessons Learned, and Recommendations Resulting from the Helios Prototype Vehicle Mishap

NASA Technical Reports Server (NTRS)

Noll, Thomas E.; Ishmael, Stephen D.; Henwood, Bart; Perez-Davis, Marla E.; Tiffany, Geary C.; Madura, John; Gaier, Matthew; Brown, John M.; Wierzbanowski, Ted

2007-01-01

The Helios Prototype was originally planned to be two separate vehicles, but because of resource limitations only one vehicle was developed to demonstrate two missions. The vehicle consisted of two configurations, one for each mission. One configuration, designated HP01, was designed to operate at extremely high altitudes using batteries and high-efficiency solar cells spread across the upper surface of its 247-foot wingspan. On August 13, 2001, the HP01 configuration reached an altitude of 96,863 feet, a world record for sustained horizontal flight by a winged aircraft. The other configuration, designated HP03, was designed for long-duration flight. The plan was to use the solar cells to power the vehicle's electric motors and subsystems during the day and to use a modified commercial hydrogen-air fuel cell system for use during the night. The aircraft design used wing dihedral, engine power, elevator control surfaces, and a stability augmentation and control system to provide aerodynamic stability and control. At about 30 minutes into the second flight of HP03, the aircraft encountered a disturbance in the way of turbulence and morphed into an unexpected, persistent, high dihedral configuration. As a result of the persistent high dihedral, the aircraft became unstable in a very divergent pitch mode in which the airspeed excursions from the nominal flight speed about doubled every cycle of the oscillation. The aircraft s design airspeed was subsequently exceeded and the resulting high dynamic pressures caused the wing leading edge secondary structure on the outer wing panels to fail and the solar cells and skin on the upper surface of the wing to rip away. As a result, the vehicle lost its ability to maintain lift, fell into the Pacific Ocean within the confines of the U.S. Navy's Pacific Missile Range Facility, and was destroyed. This paper describes the mishap and its causes, and presents the technical recommendations and lessons learned for improving the design

Technical clarity in inter-agency negotiations: Lessons from four hydropower projects

USGS Publications Warehouse

Burkardt, Nina; Lamb, Berton Lee; Taylor, Jonathan G.; Waddle, Terry J.

1995-01-01

We investigated the effect of technical clarity on success in multi-party negotiations in the Federal Energy Regulatory Commission (FERC) licensing process. Technical clarity is the shared understanding of dimensions such as the geographic extent of the project, range of flows to be considered, important species and life stages, and variety of water uses considered. The results of four hydropower licensing consultations are reported. Key participants were interviewed to ascertain the level of technical clarity present during the consultations and the degree to which the consultations were successful. Technical clarity appears to be a prerequisite for successful outcomes. Factors that enhance technical clarity include simple project design, new rather than existing projects, precise definition of issues, a sense of urgency to reach agreement, a sense of fairness among participants, and consistency in participation. Negotiators should not neglect the critical pre-negotiation steps of defining technical issues and determining appropriate studies, deciding how to interpret studies, and agreeing on responses to study results.

Technical Assistance From State Health Departments for Communities Engaged in Policy, Systems, and Environmental Change: The ACHIEVE Program

PubMed Central

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann

2013-01-01

Introduction This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. Methods We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. Results The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches’ meetings, webinars, and technical assistance conference calls. Conclusion This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events. PMID:24157078

Computational model for simulation small testing launcher, technical solution

NASA Astrophysics Data System (ADS)

Chelaru, Teodor-Viorel; Cristian, Barbu; Chelaru, Adrian

2014-12-01

The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper is focused on national project "Suborbital Launcher for Testing" (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital vehicle

Computational model for simulation small testing launcher, technical solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chelaru, Teodor-Viorel, E-mail: teodor.chelaru@upb.ro; Cristian, Barbu, E-mail: barbucr@mta.ro; Chelaru, Adrian, E-mail: achelaru@incas.ro

The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper ismore » focused on national project 'Suborbital Launcher for Testing' (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD13-6-000] Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory... related to the reliability of the Bulk-Power System. A more formal agenda will be issued at a later date...

Results of a Flipped Classroom Teaching Approach in Anesthesiology Residents.

PubMed

Martinelli, Susan M; Chen, Fei; DiLorenzo, Amy N; Mayer, David C; Fairbanks, Stacy; Moran, Kenneth; Ku, Cindy; Mitchell, John D; Bowe, Edwin A; Royal, Kenneth D; Hendrickse, Adrian; VanDyke, Kenneth; Trawicki, Michael C; Rankin, Demicha; Guldan, George J; Hand, Will; Gallagher, Christopher; Jacob, Zvi; Zvara, David A; McEvoy, Matthew D; Schell, Randall M

2017-08-01

In a flipped classroom approach, learners view educational content prior to class and engage in active learning during didactic sessions. We hypothesized that a flipped classroom improves knowledge acquisition and retention for residents compared to traditional lecture, and that residents prefer this approach. We completed 2 iterations of a study in 2014 and 2015. Institutions were assigned to either flipped classroom or traditional lecture for 4 weekly sessions. The flipped classroom consisted of reviewing a 15-minute video, followed by 45-minute in-class interactive sessions with audience response questions, think-pair-share questions, and case discussions. The traditional lecture approach consisted of a 55-minute lecture given by faculty with 5 minutes for questions. Residents completed 3 knowledge tests (pretest, posttest, and 4-month retention) and surveys of their perceptions of the didactic sessions. A linear mixed model was used to compare the effect of both formats on knowledge acquisition and retention. Of 182 eligible postgraduate year 2 anesthesiology residents, 155 (85%) participated in the entire intervention, and 142 (78%) completed all tests. The flipped classroom approach improved knowledge retention after 4 months (adjusted mean = 6%; P  = .014; d  = 0.56), and residents preferred the flipped classroom (pre = 46%; post = 82%; P  < .001). The flipped classroom approach to didactic education resulted in a small improvement in knowledge retention and was preferred by anesthesiology residents.

The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

ERIC Educational Resources Information Center

Whiteside, Aimee L.

2003-01-01

This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

SUPERFUND TECHNICAL SUPPORT

EPA Science Inventory

Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

A simulator evaluation of an automatic terminal approach system

NASA Technical Reports Server (NTRS)

Hinton, D. A.

1983-01-01

The automatic terminal approach system (ATAS) is a concept for improving the pilot/machine interface with cockpit automation. The ATAS can automatically fly a published instrument approach by using stored instrument approach data to automatically tune airplane avionics, control the airplane's autopilot, and display status information to the pilot. A piloted simulation study was conducted to determine the feasibility of an ATAS, determine pilot acceptance, and examine pilot/ATAS interaction. Seven instrument-rated pilots each flew four instrument approaches with a base-line heading select autopilot mode. The ATAS runs resulted in lower flight technical error, lower pilot workload, and fewer blunders than with the baseline autopilot. The ATAS status display enabled the pilots to maintain situational awareness during the automatic approaches. The system was well accepted by the pilots.

Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

PubMed

de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

2016-07-01

To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

The coevolution of innovation and technical intelligence in primates

PubMed Central

Street, Sally E.; Whalen, Andrew; Laland, Kevin N.

2016-01-01

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support ‘technical intelligence’ hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. PMID:26926276

The coevolution of innovation and technical intelligence in primates.

PubMed

Navarrete, Ana F; Reader, Simon M; Street, Sally E; Whalen, Andrew; Laland, Kevin N

2016-03-19

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support 'technical intelligence' hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. © 2016 The Author(s).

Modeling of technical soil-erosion control measures and its impact on soil erosion off-site effects within urban areas

NASA Astrophysics Data System (ADS)

Dostal, Tomas; Devaty, Jan

2013-04-01

The paper presents results of surface runoff, soil erosion and sediment transport modeling using Erosion 3D software - physically based mathematical simulation model, event oriented, fully distributed. Various methods to simulate technical soil-erosion conservation measures were tested, using alternative digital elevation models of different precision and resolution. Ditches and baulks were simulated by three different approaches, (i) by change of the land-cover parameters to increase infiltration and decrease flow velocity, (ii) by change of the land-cover parameters to completely infiltrate the surface runoff and (iii) by adjusting the height of the digital elevation model by "burning in" the channels of the ditches. Results show advantages and disadvantages of each approach and conclude suitable methods for combinations of particular digital elevation model and purpose of the simulations. Further on a set of simulations was carried out to model situations before and after technical soil-erosion conservation measures application within a small catchment of 4 km2. These simulations were focused on quantitative and qualitative assessment of technical soil-erosion control measures impact on soil erosion off-site effects within urban areas located downstream of intensively used agricultural fields. The scenarios were built upon a raster digital elevation model with spatial resolution of 3 meters derived from LiDAR 5G vector point elevation data. Use of this high-resolution elevation model allowed simulating the technical soil-erosion control measures by direct terrain elevation adjustment. Also the structures within the settlements were emulated by direct change in the elevation of the terrain model. The buildings were lifted up to simulate complicated flow behavior of the surface runoff within urban areas, using approach of Arévalo (Arévalo, 2011) but focusing on the use of commonly available data without extensive detailed editing. Application of the technical

Career and Technical Education Teachers and Schools: Results from the 2011-12 Schools and Staffing Survey

ERIC Educational Resources Information Center

Hensley, Elizabeth; Ottem, Randolph; Levesque, Karen

2017-01-01

This report uses data drawn from the 2011-12 Schools and Staffing Survey (SASS:12), administered by the National Center for Education Statistics (NCES) in the U.S. Department of Education, to present an in-depth look at the career and technical education (CTE) teaching profession today. The purpose of this report is to provide policymakers and…

21st Century Readiness Skills for Career and Technical Education

ERIC Educational Resources Information Center

Bennett, Tyrone L.

2012-01-01

The 21st century has embraced the technological age by storm and has approached us quicker than most have expected, leaving many still stuck in the 20th century. Technical careers require very skilled workers and their education has sprung as a strong vehicle all over the country but still most of our employed citizens, especially the youth, have…

BASINS Technical Notes

EPA Pesticide Factsheets

EPA has developed several technical notes that provide in depth information on a specific function in BASINS. Technical notes can be used to answer questions users may have, or to provide additional information on the application of features in BASINS.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glasser, Alan H.

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

DOT National Transportation Integrated Search

1998-10-01

The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

Bibliography of Lewis Research Center technical publications announced in 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1981 are indexed and abstracted. All the publications were announced in the 1981 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patent applications, and theses. A total of 384 technical publications is listed.

Approaches to simulate impact damages on aeronautical composite structures

NASA Astrophysics Data System (ADS)

Sanga, R. P. Lemanle; Garnier, C.; Pantalé, O.

2018-02-01

Impact damage is one of the most critical aggressions for composite structures in aeronautical applications. Consequences of a high/low velocity and high/low energy impacts are very important to investigate. It is usually admitted that the most critical configuration is the Barely Visible Impact Damage (BVID), with impact energy of about 25 J, where some internal damages, invisible on the impacted surface of the specimen, drastically reduce the residual properties of the impacted material. In this work we highlight by the finite element simulation, the damage initiation and propagation process and the size of the defaults created by low velocity impact. Two approaches were developed: the first one is the layup technic and the second one is based on the cohesive element technic. Both technics show the plies damages by the Hashin's criteria. Moreover the second one gives the delamination damages with regards to the Benzeggah-Kenane criteria. The validation of these models is done by confrontation with some experimental results.

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

PubMed

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency

Synthesizing Huber's Problem Solving and Kolb's Learning Cycle: A Balanced Approach to Technical Problem Solving

ERIC Educational Resources Information Center

Kamis, Arnold; Khan, Beverly K.

2009-01-01

How do we model and improve technical problem solving, such as network subnetting? This paper reports an experimental study that tested several hypotheses derived from Kolb's experiential learning cycle and Huber's problem solving model. As subjects solved a network subnetting problem, they mapped their mental processes according to Huber's…

Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

ERIC Educational Resources Information Center

Gragson, Derek E.; Hagen, John P.

2010-01-01

Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

Writing a technical note.

PubMed

Ng, K H; Peh, W C G

2010-02-01

A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

NASA Technical Reports Server (NTRS)

Baldwin, Evelyn

2008-01-01

The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

7 CFR 1469.9 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance. 1469.9 Section 1469.9... Provisions § 1469.9 Technical assistance. (a) NRCS may use the services of NRCS-approved or certified Technical Service Providers in performing its responsibilities for technical assistance. (b) Technical...

Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?—A Systematic Review of Intervention Studies

PubMed Central

Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

2018-01-01

The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE®/PubMed®, EMBASE®, Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL®) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68–0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low. PMID:29522440

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Theorycrafting the Classroom: Constructing the Introductory Technical Communication Course as a Game

ERIC Educational Resources Information Center

Finseth, Carly

2015-01-01

When games are approached as a pedagogical methodology, the homologies between games and technical communication are highlighted: pedagogy that teaches people to play and succeed within certain confines; classroom assessment that provides meaningful feedback to encourage self-improvement; instructional design that incorporates gaming theory and…

Sophistic Ethics in the Technical Writing Classroom: Teaching "Nomos," Deliberation, and Action.

ERIC Educational Resources Information Center

Scott, J. Blake

1995-01-01

Claims that teaching ethics is particularly important to technical writing. Outlines a classical, sophistic approach to ethics based on the theories and pedagogies of Protagoras, Gorgias, and Isocrates, which emphasizes the Greek concept of "nomos," internal and external deliberation, and responsible action. Discusses problems and…

Technical-tactical analysis of youth olympic taekwondo combat.

PubMed

Tornello, Francesco; Capranica, Laura; Minganti, Carlo; Chiodo, Salvatore; Condello, Giancarlo; Tessitore, Antonio

2014-04-01

The purpose of this study was to define the technical and tactical profiles of official youth taekwondo competitions played under the most recent rules of the International Taekwondo Federation. Tactical actions (i.e., attack, defense, and block), technical executions (from 1- to 4-point scores), kicking legs (i.e., front/rear and right/left), and overall technical effectiveness were investigated in relation to match outcome of semifinal and final competitions (n = 50) of youth (aged 13-14 years) black belt athletes during the Italian Taekwondo Cadet Championship. Differences (p < 0.001) were found among all action typologies (Attack: 50.9 ± 2.2%; Defense: 27.7 ± 1.5%; Block: 21.3 ± 1.6%), with winners showing fewer (p = 0.005) offensive actions and more (p = 0.001) defensive actions with respect to non-winners. Independently from match outcome, technical exchanges showed differences (p < 0.001) for technical executions. Winners resulted more efficient (p < 0.001) for both technical and tactical variables. In general, these findings showed that Cadets tend to adopt an offensive strategy. In considering that the adoption of the new electronic system requires athletes to execute correct technical actions to have a score assigned, coaches should emphasize the effectiveness of scoring techniques and help athletes to effectively improve their defense and counterattack capabilities.

A Review of Legal Decisions Relevant to Technical Standards Used in Pharmacy School Admissions

PubMed Central

2017-01-01

The implementation of an effective and legally sound technical standards procedure for pharmacy schools requires a proactive approach by admissions officers. Applicants with disabilities are accorded significant rights that must not be infringed during the admissions process in order to ensure compliance with applicable law. This article provides a review of applicable state cases, federal cases, and OCR decisions and guidance to help pharmacy schools identify procedures and implement technical standards into their admissions processes as required by ACPE Standards 2016. PMID:28381897

A Prospective Observational Study of Technical Difficulty With GlideScope-Guided Tracheal Intubation in Children.

PubMed

Zhang, Bin; Gurnaney, Harshad G; Stricker, Paul A; Galvez, Jorge A; Isserman, Rebecca S; Fiadjoe, John E

2018-05-09

The GlideScope Cobalt is one of the most commonly used videolaryngoscopes in pediatric anesthesia. Although visualization of the airway may be superior to direct laryngoscopy, users need to learn a new indirect way to insert the tracheal tube. Learning this indirect approach requires focused practice and instruction. Identifying the specific points during tube placement, during which clinicians struggle, would help with targeted education. We conducted this prospective observational study to determine the incidence and location of technical difficulties using the GlideScope, the success rates of various corrective maneuvers used, and the impact of technical difficulty on success rate. We conducted this observational study at our quaternary pediatric hospital between February 2014 and August 2014. We observed 200 GlideScope-guided intubations and documented key intubation-related outcomes. Inclusion criteria for patients were <6 years of age and elective surgery requiring endotracheal intubation. We documented the number of advancement maneuvers required to intubate the trachea, the location where technical difficulty occurred, the types of maneuvers used to address difficulties, and the tracheal intubation success rate. We used a bias-corrected bootstrapping method with 300 replicates to determine the 95% confidence interval (CI) around the rate of difficulty with an intubation attempt. After excluding attempts by inexperienced clinicians, there were 225 attempts in 187 patients, 58% (131 of 225; bootstrap CI, 51.6%-64.6%]) of the attempts had technical difficulties. Technical difficulty was most likely to occur when inserting the tracheal tube between the plane of the arytenoid cartilages to just beyond the vocal cords: "zone 3." Clockwise rotation of the tube was the most common successful corrective maneuver in zone 3. The overall tracheal intubation success rate was 98% (CI, 95%-99%); however, the first attempt success rate was only 80% (CI, 74%-86%). Patients

Casimir force in brane worlds: Coinciding results from Green's and zeta function approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linares, Roman; Morales-Tecotl, Hugo A.; Pedraza, Omar

2010-06-15

Casimir force encodes the structure of the field modes as vacuum fluctuations and so it is sensitive to the extra dimensions of brane worlds. Now, in flat spacetimes of arbitrary dimension the two standard approaches to the Casimir force, Green's function, and zeta function yield the same result, but for brane world models this was only assumed. In this work we show that both approaches yield the same Casimir force in the case of universal extra dimensions and Randall-Sundrum scenarios with one and two branes added by p compact dimensions. Essentially, the details of the mode eigenfunctions that enter themore » Casimir force in the Green's function approach get removed due to their orthogonality relations with a measure involving the right hypervolume of the plates, and this leaves just the contribution coming from the zeta function approach. The present analysis corrects previous results showing a difference between the two approaches for the single brane Randall-Sundrum; this was due to an erroneous hypervolume of the plates introduced by the authors when using the Green's function. For all the models we discuss here, the resulting Casimir force can be neatly expressed in terms of two four-dimensional Casimir force contributions: one for the massless mode and the other for a tower of massive modes associated with the extra dimensions.« less

Technical/Reference Books--Potential Often Underestimated. Books of This Type Lend Themselves to What Can Be Described As Unique Styles of Merchandising

ERIC Educational Resources Information Center

Turk, John W.

1975-01-01

Technical/reference books must be sold by the college store for it to continue as an educational resource center. A professional retailing approach to technical/reference books will increase sales and contribute to profits. (Author/PG)

State “Technical Assistance Programs” for nursing home quality improvement: variations and potential implications

PubMed Central

Li, Yue; Spector, Williams D.; Glance, Laurent G.; Mukamel, Dana B.

2013-01-01

Context To improve nursing home quality, many states developed “Technical Assistance Programs” that provide on-site consultation and training for nursing facility staff. Methods We conducted a national survey on these state programs to collect data on program design, operations, financing, and perceived effectiveness. Results As of 2010, 17 states have developed such programs. Compared to existing state nursing home quality regulations, these programs represent a collaborative, rather than enforcement-oriented, approach to quality. However, existing programs vary substantially in key structural features such as staffing patterns, funding levels, and relationship with state survey and certification agencies. Perceived effectiveness by program officials on quality was high, although few states have performed formal evaluations. Perceived barriers to program effectiveness included lack of appropriate staff and funding, among others. Conclusion State “Technical Assistance Programs” for nursing homes varies in program design and perceived effectiveness. Future comparative evaluations are needed to inform evidence-based quality initiatives. PMID:23216345

A Systematic Approach to Error Free Telemetry

DTIC Science & Technology

2017-06-28

A SYSTEMATIC APPROACH TO ERROR FREE TELEMETRY 412TW-TIM-17-03 DISTRIBUTION A: Approved for public release. Distribution is...Systematic Approach to Error-Free Telemetry) was submitted by the Commander, 412th Test Wing, Edwards AFB, California 93524. Prepared by...Technical Information Memorandum 3. DATES COVERED (From - Through) February 2016 4. TITLE AND SUBTITLE A Systematic Approach to Error-Free

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI -0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision

Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

PubMed

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2015-02-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Meta-analysis of the technical performance of an imaging procedure: Guidelines and statistical methodology

PubMed Central

Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

2017-01-01

Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test–retest repeatability data for illustrative purposes. PMID:24872353

PET/MRI – Technical Review

PubMed Central

Muzic, Raymond F.; DiFilippo, Frank P.

2015-01-01

PET/MR is a hybrid imaging technology with the potential to combine the molecular and functional information of PET with the soft-tissue contrast of MR. Herein we review the technical features and challenges of putting these different technologies together. We emphasize the conceptual to make the material accessible to a wide audience. We begin by reviewing PET/CT, a more mature multi-modality imaging technology, to provide a basis for comparison to the history of PET/MR development. We discuss the motivation and challenges of PET/MR and different approaches that have been used to meet the challenges. We conclude with a speculation about the future of this exciting imaging method. PMID:25497909

The quantile regression approach to efficiency measurement: insights from Monte Carlo simulations.

PubMed

Liu, Chunping; Laporte, Audrey; Ferguson, Brian S

2008-09-01

In the health economics literature there is an ongoing debate over approaches used to estimate the efficiency of health systems at various levels, from the level of the individual hospital - or nursing home - up to that of the health system as a whole. The two most widely used approaches to evaluating the efficiency with which various units deliver care are non-parametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Productivity researchers tend to have very strong preferences over which methodology to use for efficiency estimation. In this paper, we use Monte Carlo simulation to compare the performance of DEA and SFA in terms of their ability to accurately estimate efficiency. We also evaluate quantile regression as a potential alternative approach. A Cobb-Douglas production function, random error terms and a technical inefficiency term with different distributions are used to calculate the observed output. The results, based on these experiments, suggest that neither DEA nor SFA can be regarded as clearly dominant, and that, depending on the quantile estimated, the quantile regression approach may be a useful addition to the armamentarium of methods for estimating technical efficiency.

Cox report and the US-China arms control technical exchange program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Capua, M S

The ACE program furthered the national security interests of the US by promoting technical approaches to the implementation and verification of arms control treaties that the international community embraces. The Cox Committee report suggests that uncontrolled interactions were taking place between US and Chinese nuclear weapons scientists in the course of the ACE program. On the contrary, elaborate controls were in place at the very beginning and remained in place to control the interactions and protect US national security information. The ACE program payoff to national security was just beginning and its suspension, resulting from the Cox reports allegations, ismore » a setback to US-China progress on arms control.« less

Numerical simulation of deformation and failure processes of a complex technical object under impact loading

NASA Astrophysics Data System (ADS)

Kraus, E. I.; Shabalin, I. I.; Shabalin, T. I.

2018-04-01

The main points of development of numerical tools for simulation of deformation and failure of complex technical objects under nonstationary conditions of extreme loading are presented. The possibility of extending the dynamic method for construction of difference grids to the 3D case is shown. A 3D realization of discrete-continuum approach to the deformation and failure of complex technical objects is carried out. The efficiency of the existing software package for 3D modelling is shown.

Technical Evaluation Motor No. 7 (TEM-7)

NASA Technical Reports Server (NTRS)

Hughes, Phil

1991-01-01

The Technical Evaluation Motor No. 7 (TEM-7) test was a full-scale, full duration static test firing of a high performance motor-configuration solid rocket motor with nozzle vectoring. The final test report documents the procedures, performance, and results of the static test firing of TEM-7. All observations, discussions, conclusions, and recommendations included in the report are complete and final except for the TEM-7 fixed housing unbond investigation. A presentation and discussion of TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107, Rev A, Space Shuttle Technical Evaluation Motor No. 7 (TEM-7) Static Fire Test Plan are included.

Introducing active learning pedagogy into a technical and vocational education and training academy in Kurdistan, Iraq

NASA Astrophysics Data System (ADS)

Dickson, Martina; Ladefoged, Svend Erik

2017-10-01

This article focuses on a teaching methodology project which investigated issues of teaching quality at a technical and vocational education and training (TVET) academy in Kurdistan, Northern Iraq. The academy was established in 2012 to provide unemployed youth with TVET, particularly workplace-relevant training. A needs analysis showed that the academy's teachers were mainly skilled in technical content areas rather than in pedagogy. Perhaps as a result, predominantly teacher-centred approaches to teaching were observed. However, teaching and learning in TVET, by its very definition, must consider active learning and practical training as core to its vocational purpose. Moreover, technical and pedagogical skills are intrinsically linked, since a teacher cannot effectively pass on technical skills without the necessary pedagogical skills to do so. It is on this premise that the authors of this article based their project, which was designed for the purpose of upgrading the teachers' pedagogical skills to incorporate more active learning strategies and practical work. Comparison of observation logs and feedback sessions at the conclusion of their project provided evidence that whilst some of the teachers' pedagogical skills had shifted towards using more dynamic teaching strategies, interviews strongly indicated that there was also some reluctance to incorporate active learning. In their conclusion, the authors suggest that the insights gained from this project could be further empirically examined in a larger, multi-institutional study.

'Buildings in Use' Study. Technical Factors.

ERIC Educational Resources Information Center

Wisconsin Univ., Milwaukee. School of Architecture and Urban Planning.

The second report of the 'Buildings in Use' study documents the results of over 100 field tests conducted at four elementary schools, as well as discussion of these results and relevant technical specifications and details. The procedural framework used in the Field Tests Manual is followed and test results are rated numerically wherever possible.…

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

PubMed

Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-03-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

Electromagnetic-Tracked Biopsy under Ultrasound Guidance: Preliminary Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hakime, Antoine, E-mail: thakime@yahoo.com; Deschamps, Frederic; Marques De Carvalho, Enio Garcia

2012-08-15

Purpose: This study was designed to evaluate the accuracy and safety of electromagnetic needle tracking for sonographically guided percutaneous liver biopsies. Methods: We performed 23 consecutive ultrasound-guided liver biopsies for liver nodules with an electromagnetic tracking of the needle. A sensor placed at the tip of a sterile stylet (18G) inserted in a coaxial guiding trocar (16G) used for biopsy was localized in real time relative to the ultrasound imaging plane, thanks to an electromagnetic transmitter and two sensors on the ultrasound probe. This allows for electronic display of the needle tip location and the future needle path overlaid onmore » the real-time ultrasound image. Distance between needle tip position and its electronic display, number of needle punctures, number of needle pull backs for redirection, technical success (needle positioned in the target), diagnostic success (correct histopathology result), procedure time, and complication were evaluated according to lesion sizes, depth and location, operator experience, and 'in-plane' or 'out-of-plane' needle approach. Results: Electronic display was always within 2 mm from the real position of the needle tip. The technical success rate was 100%. A single needle puncture without repuncture was used in all patients. Pull backs were necessary in six patients (26%) to obtain correct needle placement. The overall diagnostic success rate was 91%. The overall true-positive, true-negative, false-negative, and failure rates of the biopsy were 100% (19/19) 100% (2/2), 0% (0/23), and 9% (2/23). The median total procedure time from the skin puncture to the needle in the target was 30 sec (from 5-60 s). Lesion depth and localizations, operator experience, in-plane or out-of-plane approach did not affect significantly the technical, diagnostic success, or procedure time. Even when the tumor size decreased, the procedure time did not increase. Conclusions: Electromagnetic-tracked biopsy is accurate to

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP IRON AND STEEL MILL SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

This document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

Novel strategy of endoscopic submucosal dissection using an insulation-tipped knife for early gastric cancer: near-side approach method

PubMed Central

Mori, Genki; Nonaka, Satoru; Oda, Ichiro; Abe, Seiichiro; Suzuki, Haruhisa; Yoshinaga, Shigetaka; Nakajima, Takeshi; Saito, Yutaka

2015-01-01

Background and study aims: Endoscopic submucosal dissection (ESD) using insulation-tipped knives (IT knives) to treat gastric lesions located on the greater curvature of the gastric body remains technically challenging because of the associated bleeding, control of which can be difficult and time consuming. To eliminate these difficulties, we developed a novel strategy which we have called the “near-side approach method” and assessed its utility. Patients and methods: We reviewed patients who underwent ESD for solitary early gastric cancer located on the greater curvature of the gastric body from January 2003 to September 2014. The technical results of ESD were compared between the group treated with the novel near-side approach method and the group treated with the conventional method. Results: This study included 238 patients with 238 lesions, 118 of which were removed using the near-side approach method and 120 of which were removed using the conventional method. The median procedure time was 92 minutes for the near-side approach method and 120 minutes for the conventional method. The procedure time was significantly shorter in the near-side approach method arm. Although, the procedure time required by an experienced endoscopist was not significantly different between the two groups (100 vs. 110 minutes), the near-side approach group showed significantly shorter procedure time for a less-experienced endoscopist (90 vs. 120 minutes). Conclusions: The near-side approach method appears to require less time to complete gastric ESD than the conventional method using IT knives for technically challenging lesions located on the greater curvature of the gastric body, especially if the procedure is performed by less-experienced endoscopists. PMID:26528496

A Summary of Technical Problems Associated With Broadband Cable Teleservices Development. A Survey of Technical Requirements for Broadband Cable Teleservices; Volume One.

ERIC Educational Resources Information Center

McManamon, P. M.; Utlaut, W. F.

The results of a survey of cable television (CATV) and related technological industries are summarized. In this, the first of a series of seven reports, attention is focused upon some major technical factors which need to be considered in order that a transition from the technical state of today's cable television and services to new teleservices…

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 2:] Technical communications in aeronautics: Results of an exploratory study. An analysis of managers' and nonmanagers' responses

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1989-01-01

Data collected from an exploratory study concerned with the technical communications practices of aerospace engineers and scientists were analyzed to test the primary assumption that aerospace managers and nonmanagers have different technical communications practices. Five assumptions were established for the analysis. Aerospace managers and nonmanagers were found to have different technical communications practices for three of the five assumptions tested. Although aerospace managers and nonmanagers were found to have different technical communications practices, the evidence was neither conclusive nor compelling that the presumption of difference in practices could be attributed to the duties performed by aerospace managers and nonmanagers.

Validation of column-based chromatography processes for the purification of proteins. Technical report No. 14.

PubMed

2008-01-01

PDA Technical Report No. 14 has been written to provide current best practices, such as application of risk-based decision making, based in sound science to provide a foundation for the validation of column-based chromatography processes and to expand upon information provided in Technical Report No. 42, Process Validation of Protein Manufacturing. The intent of this technical report is to provide an integrated validation life-cycle approach that begins with the use of process development data for the definition of operational parameters as a basis for validation, confirmation, and/or minor adjustment to these parameters at manufacturing scale during production of conformance batches and maintenance of the validated state throughout the product's life cycle.

SADI-S WITH RIGHT GASTRIC ARTERY LIGATION: TECHNICAL SYSTEMATIZATION AND EARLY RESULTS.

PubMed

Gebelli, Jordi Pujol; Gordejuela, Amador Garcia Ruiz de; Ramos, Almino Cardoso; Nora, Mario; Pereira, Ana Marta; Campos, Josemberg Marins; Ramos, Manoela Galvão; Bastos, Eduardo Lemos de Souza; Marchesini, João Batista

Bariatric surgery is performed all over the world with close to 500.000 procedures per year. The most performed techniques are Roux-en-Y gastric bypass and sleeve gastrectomy. Despite this data, the most effective procedure, biliopancreatic diversion with or without duodenal switch, represents only no more than 1.5% of the procedures. Technical complexity, morbidity, mortality, and severe nutritional adverse effects related to the procedure are the main fears that prevent most universal acceptance. To explain the technical aspects and the benefits of the SADI-S with right gastric artery ligation as an effective simplification from the original duodenal switch. Were included all patients undergoing this procedure from the November 2014 to May 2016, describing and analysing aspects of this technique, the systematization and early complications associated with the procedure. A series of 67 patients were operated; 46 were women (68.7%); mean age of the group was 44 years old (33-56); and an average BMI of 53.5 kg/m2 (50-63.5). Surgical time was 115 min (80-180). A total of five patients (7.5%) had any complication and two (2.9%) had to be reoperated. There were two patients with leak, one at the duodenal stump and other at the esophagogastric angle. There was no mortality. Patients stayed at the hospital a median of 2.5 days (1-25). SADI-S with right gastric artery ligation is a safe procedure with few preliminary complications. The technical variations introduced to the classical duodenal switch are reproducible and may allow this procedure to be more popular. All the complications in this series were not related to the ligation of the right gastric artery. Cerca de 500.000 cirurgias bariátricas são realizadas a cada ano em todo o mundo. As técnicas mais realizadas são o bypass gástrico em Y-de-Roux e a gastrectomia vertical. A derivação biliopancreática, com ou sem duodenal switch, é considerada técnica mais eficaz no tratamento cirúrgico do paciente obeso

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eggeman, Tim; O'Neill, Brian

2016-08-17

ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was alreadymore » in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive

Balancing the health workforce: breaking down overall technical change into factor technical change for labour-an empirical application to the Dutch hospital industry.

PubMed

Blank, Jos L T; van Hulst, Bart L

2017-02-17

Well-trained, well-distributed and productive health workers are crucial for access to high-quality, cost-effective healthcare. Because neither a shortage nor a surplus of health workers is wanted, policymakers use workforce planning models to get information on future labour markets and adjust policies accordingly. A neglected topic of workforce planning models is productivity growth, which has an effect on future demand for labour. However, calculating productivity growth for specific types of input is not as straightforward as it seems. This study shows how to calculate factor technical change (FTC) for specific types of input. The paper first theoretically derives FTCs from technical change in a consistent manner. FTC differs from a ratio of output and input, in that it deals with the multi-input, multi-output character of the production process in the health sector. Furthermore, it takes into account substitution effects between different inputs. An application of the calculation of FTCs is given for the Dutch hospital industry for the period 2003-2011. A translog cost function is estimated and used to calculate technical change and FTC for individual inputs, especially specific labour inputs. The results show that technical change increased by 2.8% per year in Dutch hospitals during 2003-2011. FTC differs amongst the various inputs. The FTC of nursing personnel increased by 3.2% per year, implying that fewer nurses were needed to let demand meet supply on the labour market. Sensitivity analyses show consistent results for the FTC of nurses. Productivity growth, especially of individual outputs, is a neglected topic in workforce planning models. FTC is a productivity measure that is consistent with technical change and accounts for substitution effects. An application to the Dutch hospital industry shows that the FTC of nursing personnel outpaced technical change during 2003-2011. The optimal input mix changed, resulting in fewer nurses being needed to let

Association of Physical and Technical Activities With Partial Match Status in a Soccer Professional Team.

PubMed

Moalla, Wassim; Fessi, Mohamed Saieffedin; Makni, Emna; Dellal, Alexandre; Filetti, Cristoforo; Di Salvo, Valter; Chamari, Karim

2018-06-01

Moalla, W, Fessi, MS, Makni, E, Dellal, A, Filetti, C, Di Salvo, V, and Chamari, K. Association of physical and technical activities with partial match status in a soccer professional team. J Strength Cond Res 32(6): 1708-1714, 2018-The purpose of this study was to examine the association between physical and technical activities and partial match status (winning, drawing, or losing) in a professional soccer team over 2 seasons. Physical and technical activities of 52 official matches were collected and analyzed at each 15-minute interval, for each half (45 minutes), and full match (90 minutes) using a multiple-camera computerized tracking system. The results indicated that according to full match outcome: winning status was characterized by players covering more total distance (p ≤ 0.05) and low-intensity running (<14.4 km·h) (p ≤ 0.05), whereas, losing status induced more sprinting (≥25.2 km·h) (p < 0.01) and high-intensity running (≥19.8 km·h) (p ≤ 0.05). However, according to partial match status (i.e., 15 minutes and half time), players covered more distance for all running intensities while winning (p < 0.01). Technical match performance scores were not influenced by match status. In conclusion, the present study showed that the physical activities including high-intensity running and total distance covered were related to the match status, whereas technical activities were not. The overall outcome shows that higher physical activity was associated with winning partial match periods. This approach highlights the importance of physical fitness in soccer and may help coaches to better modulate players' roles and team tactical organization throughout the match.

Advanced Risk Reduction Tool (ARRT) Special Case Study Report: Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Kirsch, Paul J.; Hayes, Jane; Zelinski, Lillian

2000-01-01

This special case study report presents the Science and Engineering Technical Assessments (SETA) team's findings for exploring the correlation between the underlying models of Advanced Risk Reduction Tool (ARRT) relative to how it identifies, estimates, and integrates Independent Verification & Validation (IV&V) activities. The special case study was conducted under the provisions of SETA Contract Task Order (CTO) 15 and the approved technical approach documented in the CTO-15 Modification #1 Task Project Plan.

A Patient-Centered Approach to Informed Consent: Results from a Survey and Randomized Trial.

PubMed

Krishnamurti, Tamar; Argo, Nichole

2016-08-01

Traditional informed consent documents tend to be too lengthy and technical to facilitate proper patient engagement. Patient-centered, short informed consent content could be equally informative, while minimizing patient burden and producing greater patient engagement. This study aimed to develop and evaluate patient-centered, patient-designed paper and video informed consent formats. Two studies were conducted. In study 1, 118 self-identifying asthma patients recruited from a national, online pool completed survey tasks from their personal computers. Participants in study 1 were randomly assigned to examine sections of a standard informed consent document for an asthma trial and to select information they deemed critical to their decision making. In study 2, a sample of 83 self-identifying asthma patients completed experimental tasks in a university laboratory. Participants in study 2 were randomly assigned to a full informed consent document; a shortened, patient-designed informed consent document created from study 1; or a video with content matched to the shortened paper form. Study 1 yielded a more readable, concise version of a standard informed consent document (5 v. 17 pages). This shortened, patient-designed form closely met normative criteria for good clinical practice. In study 2, participants who viewed either the shortened paper consent or video reported greater engagement than those viewing the standard paper consent, without lowered performance on any other decision-relevant variables (i.e., comprehension, judged risk/benefit, feelings of trust). The video consent format did not cause increased enrollment. Results suggest that providing concise informed consent content, systematically developed from patients' self-reported information needs, may be more effective at engaging and informing clinical trial participants than the traditional consent approach, without detriment to trial comprehension, risk assessment, or enrollment. © The Author(s) 2016.

Novel approach for beacon formation through simulated turbulence: initial lab-test results

NASA Astrophysics Data System (ADS)

Khizhnyak, A.; Markov, V.; Tomov, I.; Wu, F.

2010-02-01

In this paper we report the results of the analysis and experimental modeling of the target-in-the-loop (TIL) approach that is used to form a localized beacon for a laser beam propagating through turbulent atmosphere. The analogy between the TIL system and the laser cavity has been used here to simulate the process shaping the laser beacon on a remote image-resolved target with rough surface. The TIL breadboard was integrated and used for laboratory modeling of the proposed approach. This breadboard allowed to simulate the TIL arrangement with a rough-surface target and laser beam propagation through the turbulent atmospheric layer. Here we present the initial results of the performed studies.

Composite Socio-Technical Systems: A Method for Social Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yingchen; He, Fulin; Hao, Jun

In order to model and study the interactions between social on technical systems, a systemic method, namely the composite socio-technical systems (CSTS), is proposed to incorporate social systems, technical systems and the interaction mechanism between them. A case study on University of Denver (DU) campus grid is presented in paper to demonstrate the application of the proposed method. In the case study, the social system, technical system, and the interaction mechanism are defined and modelled within the framework of CSTS. Distributed and centralized control and management schemes are investigated, respectively, and numerical results verifies the feasibility and performance of themore » proposed composite system method.« less

Two essays on efficiency in the electric power industry: Measurement of technical and allocative efficiency

NASA Astrophysics Data System (ADS)

Gardiner, John Corby

The electric power industry market structure has changed over the last twenty years since the passage of the Public Utility Regulatory Policies Act (PURPA). These changes include the entry by unregulated generator plants and, more recently, the deregulation of entry and price in the retail generation market. Such changes have introduced and expanded competitive forces on the incumbent electric power plants. Proponents of this deregulation argued that the enhanced competition would lead to a more efficient allocation of resources. Previous studies of power plant technical and allocative efficiency have failed to measure technical and allocative efficiency at the plant level. In contrast, this study uses panel data on 35 power plants over 59 years to estimate technical and allocative efficiency of each plant. By using a flexible functional form, which is not constrained by the assumption that regulation is constant over the 59 years sampled, the estimation procedure accounts for changes in both state and national regulatory/energy policies that may have occurred over the sample period. The empirical evidence presented shows that most of the power plants examined have operated more efficiently since the passage of PURPA and the resultant increase of competitive forces. Chapter 2 extends the model used in Chapter 1 and clarifies some issues in the efficiency literature by addressing the case where homogeneity does not hold. A more general model is developed for estimating both input and output inefficiency simultaneously. This approach reveals more information about firm inefficiency than the single estimation approach that has previously been used in the literature. Using the more general model, estimates are provided on the type of inefficiency that occurs as well as the cost of inefficiency by type of inefficiency. In previous studies, the ranking of firms by inefficiency has been difficult because of the cardinal and ordinal differences between different types of

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

19 CFR 213.4 - Disclosure of receipt of technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

19 CFR 213.4 - Disclosure of receipt of technical assistance.

Code of Federal Regulations, 2013 CFR

2013-04-01

....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

19 CFR 213.4 - Disclosure of receipt of technical assistance.

Code of Federal Regulations, 2011 CFR

2011-04-01

....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

19 CFR 213.4 - Disclosure of receipt of technical assistance.

Code of Federal Regulations, 2014 CFR

2014-04-01

....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function.

PubMed

Papaspyridakos, Panos; Lal, Kunal

2013-06-01

To report the clinical results and technical complications with computer-assisted design/computer-assisted manufacturing (CAD/CAM) zirconia, implant fixed complete dental prostheses (IFCDPs) after 2-4 years in function. Fourteen consecutive edentulous patients (16 edentulous arches) were included in this study. Ten of the patients were women and four were men, with an average age of 58 years (range: 35-71). Ten mandibular and six maxillary arches were restored with porcelain fused to zirconia (PFZ) IFCDPs. Of the 16 arches, 14 received one-piece and 2 received segmented two-piece IFCDPs, respectively. The mean clinical follow-up period was 3 years (range: 2-4). At the last recall appointment, biological and technical parameters of dental implant treatment were evaluated. The implant and prosthesis survival rate following prosthesis insertion was 100% up to 4-year follow-up. The prostheses in 11 of the 16 restored arches were structurally sound, exhibited favorable soft tissue response, esthetics, and patient satisfaction. Five IFCDPs (31.25%) in four patients exhibited porcelain veneer chipping. Chipping was minor in three prostheses (three patients) and was addressed intraorally with polishing (one prosthesis) or composite resin (two prostheses). One patient with maxillary and mandibular zirconia IFCDP exhibited major porcelain chipping fractures which had to be repaired in the laboratory. Function, esthetics, and patient satisfaction were not affected in three of the four fracture incidents. Median crestal bone loss was 0.1 mm (0.01-0.2 mm). The presence of parafunctional activity, the IFCDP as opposing dentition, and the absence of occlusal night guard were associated with all the incidents of ceramic chipping. CAD/CAM zirconia IFCDPs are viable prosthetic treatment after 2-4 years in function, but not without complications. The porcelain chipping/fracture was the most frequent technical complication, with a 31.25% chipping rate at the prosthesis level

"Check Your Smile", Prototype of a Collaborative LSP Website for Technical Vocabulary

ERIC Educational Resources Information Center

Yassine-Diab, Nadia; Alazard-Guiu, Charlotte; Loiseau, Mathieu; Sorin, Laurent; Orliac, Charlotte

2016-01-01

In a design-based research approach (Barab & Squire, 2004), we are currently developing the first prototype of a collaborative Language for Specific Purposes (LSP) website. It focuses on technical vocabulary to help students master any field of LSP better. "Check Your Smile" is a platform aggregating various types of gameplays for…

49 CFR 552.6 - Technical review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6...

24 CFR 583.140 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Technical assistance. 583.140... Technical assistance. (a) General. HUD may set aside funds annually to provide technical assistance, either... technical assistance is for the purpose of promoting the development of supportive housing and supportive...

49 CFR 552.6 - Technical review.

Code of Federal Regulations, 2011 CFR

2011-10-01

... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with... 49 Transportation 6 2011-10-01 2011-10-01 false Technical review. 552.6 Section 552.6...

Analyzing Information Systems Development: A Comparison and Analysis of Eight IS Development Approaches.

ERIC Educational Resources Information Center

Iivari, Juhani; Hirschheim, Rudy

1996-01-01

Analyzes and compares eight information systems (IS) development approaches: Information Modelling, Decision Support Systems, the Socio-Technical approach, the Infological approach, the Interactionist approach, the Speech Act-based approach, Soft Systems Methodology, and the Scandinavian Trade Unionist approach. Discusses the organizational roles…

Financial Statement Audit Report of Guilford Technical Community College.

ERIC Educational Resources Information Center

Campbell, Ralph

This report presents the results of the Guilford Technical Community College financial statement audit for the fiscal year ending on June 30, 1998. Guilford Technical Community College is a component of the State of North Carolina, thus the authority to audit is granted by Article 5A of G.S. 147. The accounts and operations of the institution were…

Ethics in Technical Communication. The Allyn & Bacon Series in Technical Communication.

ERIC Educational Resources Information Center

Dombrowski, Paul

Arguing that ethics is an important part of technical communication, this book discusses ethics in the broad sense including not only the act of communication but also where technical information came from and how it likely will be used. It is intended for advanced undergraduate and graduate audiences, and assumes some familiarity with technical…

Mathematics for the Technical Student: The Use of the Computer in the Systems Approach to Instruction.

ERIC Educational Resources Information Center

Capps, Joan P.

An instructional method using flow-chart symbols to make mathematical abstractions more concrete was implemented for a year in a technical mathematics course. Students received instruction in computer applications and programming in the BASIC language in order to increase motivation and firm the mathematical skills and problem-solving approaches…

Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

1984-01-01

Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

[Forensic-medical diagnostics of an electrical mark resulting from the injury inflicted by technical electricity in the aqueous environment].

PubMed

Pigolkin, Iu I; Skovorodnikov, S V; Dubrovin, I A

2014-01-01

The objective of the present study was to develop the criteria for forensic-medical diagnostics of an electrical injury inflicted in the aqueous environment based on the characteristics of the electrical mark. The specific morphological features of the electrical injuries inflicted in the aqueous environment that were discovered in the materials available for the forensic medical expertise were analysed taking into consideration the results of the relevant research reported in the forensic medical literature. It was shown that an electrical injury inflicted in the aqueous environment results in the formation of an unusual mark in the form of blisters containing no watery liquid associated with electrogenic oedema in the surrounding tissues. Macroscopic and microscopic studies of the electrical mark failed to reveal the signs of grade III and IV grade thermal burning or thermally affected hair. It is concluded that the consistent characteristics of the electrical mark resulting from the injury inflicted by technical electricity in the aqueous environment include cell lengthening, blister formation inside the corneal layer, and the separation of epidermis from the skin proper.

44 CFR 65.3 - Requirement to submit new technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data. 65.3 Section 65.3 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.3 Requirement to submit new technical data. A community's base flood elevations may increase or decrease resulting from physical changes affecting flooding...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 1 2013-10-01 2013-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

12 CFR 705.10 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Technical assistance. 705.10 Section 705.10... DEVELOPMENT REVOLVING LOAN PROGRAM FOR CREDIT UNIONS § 705.10 Technical assistance. NCUA may provide technical... or NCUA. NCUA will base technical assistance on funds availability, the needs of the participating...

Technical Assistance Plan (TAP)

EPA Pesticide Factsheets

A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

Virtual expansion of the technical vision system for smart vehicles based on multi-agent cooperation model

NASA Astrophysics Data System (ADS)

Krapukhina, Nina; Senchenko, Roman; Kamenov, Nikolay

2017-12-01

Road safety and driving in dense traffic flows poses some challenges in receiving information about surrounding moving object, some of which can be in the vehicle's blind spot. This work suggests an approach to virtual monitoring of the objects in a current road scene via a system with a multitude of cooperating smart vehicles exchanging information. It also describes the intellectual agent model, and provides methods and algorithms of identifying and evaluating various characteristics of moving objects in video flow. Authors also suggest ways for integrating the information from the technical vision system into the model with further expansion of virtual monitoring for the system's objects. Implementation of this approach can help to expand the virtual field of view for a technical vision system.

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

Bibliography--Unclassified Technical Reports, Special Reports, and Technical Notes: FY 1982.

DTIC Science & Technology

1982-11-01

in each category are listed in chronological order under seven areas: manpower management, personnel administration , organization management, education...7633). Technical reports listed that have unlimited distribution can also be obtained from the National Technical Information Service , 5285 Port Royal...simulations of manpower systems. This research exploits the technology of computer-managed large-scale data bases. PERSONNEL ADMINISTRATION The personnel

Direct Final Rule: Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision

EPA Pesticide Factsheets

Rule making certain technical corrections to the rules establishing emission standards for nonroad diesel engines and amending those rules to provide manufacturers with a production technical relief provision for Tier 3 equipment.

Notes on the Early History of Technical Higher

NASA Astrophysics Data System (ADS)

Teodorescu, Horia Nicolai

We perform a brief analysis of the economical and political context of establishing the first technical higher school in Romania. We urge for a revision of the current point of view on the educational level in Yashi (Iaši) and Bucharest at the epoch, highlighting that these were, at the time, important academic centers we may not recognize or may not be aware of today. We also plead for a long due serious approach about the history of early modern education in Romania.

Cost Effectiveness in Evaluation Technical Assistance: Different Aspects of Measuring Cost and Outcomes.

ERIC Educational Resources Information Center

Estes, Gary D.

The paper focuses on the Title I Evaluation Technical Assistance Centers to illustrate issues of measuring costs and deciding on outcome criteria before promoting "cost-effective" approaches. Effects are illustrated for varying resource allocations among personnel, travel, materials, and phone costs as a function of emphasizing…

Defense Technical Information Center (DTIC) - Its role in the USAF Scientific and Technical Information Program

NASA Technical Reports Server (NTRS)

Kuhn, Allan D.

1991-01-01

The Defense Technical Information Center (DTIC), the central repository for DOD scientific and technical information concerning studies and research and engineering efforts, is discussed. The present makeup of DTIC is described and its functions in producing technical reports and technical report bibliographies are examined. DTIC's outreach services are reviewed, as are its DTIC information and technology transfer programs. DTIC's plans for the year 2000 and its relation to the mission of the U.S. Air Force, including the Air Force's STINFO program, are addressed.

Innovative Approaches to Assessment of Results of Higher School Students Training

ERIC Educational Resources Information Center

Vaganova, Olga I.; Medvedeva, Tatiana Yu.; Kirdyanova, Elena R.; Kazantseva, Galina A.; Karpukova, Albina A.

2016-01-01

The basis of assessment tools selection for performance of control and evaluation of training results subject to requirements of modular-competence approach has been disclosed. The experience in implementation of assessment tools during "General and professional pedagogy" course has been observed. The objective of the study is rationale…

Making sense of complex electronic records: socio-technical design in social care.

PubMed

Wastell, David; White, Sue

2014-03-01

Dealing with complex electronic documentation is an integral part of much contemporary professional work. In this paper, we address the design of electronic records for social care professionals in the UK. Recent reforms in UK child welfare have followed a top-down, managerial approach emphasizing conformance to standard processes. The vicissitudes of a major national IT project, the Integrated Children's System, show the limitations of this approach, in particular the detrimental effect it has had on professional autonomy. Following in the foot-steps of Ken Eason, we argue that socio-technical design, by focussing on innovative applications of technology to support users (rather than the interests of the bureaucracy) offers a more promising alternative. A user-centred design exercise is presented to illustrate this approach in action. A novel interface was developed for handling the heterogeneous bundle of documents which make up the social care record, helping social workers make better sense of case-files. The prototype draws on the metaphor of the dining-room table as a way of overcoming the limitations of the computer display. We conclude that socio-technical thinking engenders a shift in mind-set, opening up a radically different design space compared to current design orthodoxy. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Status and Opportunities for Improving the Consistency of Technical Reference Manuals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, Tina; Velonis, Aquila; Haeri, Hossein

Across the United States, energy-efficiency program administrators rely on Technical Reference Manuals (TRMs) as sources for calculations and deemed savings values for specific, well-defined efficiency measures. TRMs play an important part in energy efficiency program planning by providing a common and consistent source for calculation of ex ante and often ex post savings. They thus help reduce energy-efficiency resource acquisition costs by obviating the need for extensive measurement and verification and lower performance risk for program administrators and implementation contractors. This paper considers the benefits of establishing region-wide or national TRMs and considers the challenges of such undertaking due tomore » the difficulties in comparing energy savings across jurisdictions. We argue that greater consistency across TRMs in the approaches used to determine deemed savings values, with more transparency about assumptions, would allow better comparisons in savings estimates across jurisdictions as well as improve confidence in reported efficiency measure savings. To support this thesis, we review approaches for the calculation of savings for select measures in TRMs currently in use in 17 jurisdictions. The review reveals differences in the saving methodologies, technical assumptions, and input variables used for estimating deemed savings values. These differences are described and their implications are summarized, using four, common energy-efficiency measures as examples. Recommendations are then offered for establishing a uniform approach for determining deemed savings values.« less

Assessing overall, technical, and scale efficiency among home health care agencies.

PubMed

Valdmanis, Vivian G; Rosko, Michael D; Leleu, Hervé; Mukamel, Dana B

2017-06-01

While home health care agencies (HHAs) play a vital role in the production of health, little research has been performed gauging their efficiency. Employing a robust approach to data envelopment analysis (DEA) we assessed overall, technical, and scale efficiency on a nationwide sample of HHAs. After deriving the three efficiency measures, we regressed these scores on a variety of environmental factors. We found that HHAs, on average, could proportionally reduce inputs by 28 % (overall efficiency), 23 % (technical efficiency) and 6 % (scale efficiency). For-profit ownership was positively associated with improvements in overall efficiency and technical efficiency and chain ownership was positively associated with global efficiency. There were also state-by-state variations on all the efficiency measures. As home health becomes an increasingly important player in the health care system, and its share of national health expenditures increases, it has become important to understand the cost structure of the industry and the potential for efficiencies. Therefore, further research is recommended as this sector continues to grow.

A planning approach for agricultural watersheds using precision conservation

USDA-ARS?s Scientific Manuscript database

This brief article, written for a non-technical audience, discusses a recently-developed approach for watershed planning and nutrient reduction. The approach can help local stakeholders identify conservation practices that are locally preferred and determine how those practices can be distributed ac...

[Surgery of prostate cancer: Technical principles and perioperative complications].

PubMed

Salomon, L; Rozet, F; Soulié, M

2015-11-01

To describe the surgical procedure of localized prostate cancer treated by radical prostatectomy. Bibliography search was performed from the Medline database (National Library of Medicine, PubMed) selected according to the scientific relevance. The research was focused on historic of radical prostatectomy, surgical anatomy, surgical technics of radical prostatectomy and lymph nodes excision, and complications. During the last 30 years, evolution of radical prostatectomy was important, from open to mini-invasive surgery with or without robotic assistance. Anatomical knowledge of the prostate was useful to describe the different anatomical structure as urinary sphincter and fascias, and to develop different procedure of neurovascular bundles preservation to ameliorate functional results. Complications are well-known and their taking-over more precise. Results of radical prostatectomy depend less of the surgical approach but more of the attitude of the surgeon according to the characteristics of the tumor and the functional status of the patient. Radical prostatectomy is an elaborate and challenging procedure when carcinological risk balances with functional results. Nevertheless, complications are quite rare. Improvement of results is due to adequation between surgical procedure and oncological and functional status. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Solar heating and cooling technical data and systems analysis

NASA Technical Reports Server (NTRS)

Christensen, D. L.

1976-01-01

The acquisition and processing of selected parametric data for inclusion in a computerized Data Base using the Marshall Information Retrieval and Data System (MIRADS) developed by NASA-MSFC is discussed. This data base provides extensive technical and socioeconomic information related to solar energy heating and cooling on a national scale. A broadly based research approach was used to assist in the support of program management and the application of a cost-effective program for solar energy development and demonstration.

Leadership Styles of Lecturer's Technical and Vocational in Teaching and Learning

ERIC Educational Resources Information Center

Razak, Nur Afifah Binti Abdul; Jaafar, Siti Norain Bt; Hamidon, Nur Izeanty Binti; Zakaria, Normah Binti

2015-01-01

Leadership style is a way of using the power of a leader held as a tool to influence the students and to achieve the objectives in the classroom and affect the election approaches in teaching and learning process. The purpose of this research is to study the style of lecturer's leadership in UTHM Technical and Vocational (TVeT). The study focuses…

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches.

PubMed

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P; Berg, Marc

2007-05-16

To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one "centralised" and the other "decentralised" have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 15: Technical uncertainty and project complexity as correlates of information use by US industry-affiliated aerospace engineers and scientists: Results of an exploratory investigation

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Nanci A.; Affelder, Linda O.; Hecht, Laura M.; Kennedy, John M.; Barclay, Rebecca O.

1993-01-01

An exploratory study was conducted that investigated the influence of technical uncertainty and project complexity on information use by U.S. industry-affiliated aerospace engineers and scientists. The study utilized survey research in the form of a self-administered mail questionnaire. U.S. aerospace engineers and scientists on the Society of Automotive Engineers (SAE) mailing list served as the study population. The adjusted response rate was 67 percent. The survey instrument is appendix C to this report. Statistically significant relationships were found to exist between technical uncertainty, project complexity, and information use. Statistically significant relationships were found to exist between technical uncertainty, project complexity, and the use of federally funded aerospace R&D. The results of this investigation are relevant to researchers investigating information-seeking behavior of aerospace engineers. They are also relevant to R&D managers and policy planners concerned with transferring the results of federally funded aerospace R&D to the U.S. aerospace industry.

Technical Vocabulary in Specialised Texts.

ERIC Educational Resources Information Center

Chung, Teresa Mihwa; Nation, Paul

2003-01-01

Describes two studies of technical vocabulary, one using an anatomy text and the other an applied linguistics text. Technical vocabulary was found by rating words in the texts on a four-step scale. Found that technical vocabulary made up a very substantial proportion of both the different words and the running words in texts. (Author/VWL)

Minimally invasive surgery: lateral approach interbody fusion: results and review.

PubMed

Youssef, Jim A; McAfee, Paul C; Patty, Catherine A; Raley, Erin; DeBauche, Spencer; Shucosky, Erin; Chotikul, Liana

2010-12-15

A retrospective review of patients treated at 2 institutions with anterior lumbar interbody fusion using a minimally invasive lateral retroperitoneal approach, and review of literature. To analyze the outcomes from historical literature and from a retrospectively compiled database of patients having undergone anterior interbody fusions performed through a lateral approach. A paucity of published literature exists describing outcomes following lateral approach fusion surgery. Patients treated with extreme lateral interbody fusion (XLIF) were identified through retrospective chart review. Treatment variables included operating room (OR) time, estimated blood loss (EBL), length of hospital stay (LOS), complications, and fusion rate. A literature review, using the National Center for Biotechnology Information databases PubMed/MEDLINE and Google Scholar, yielded 14 peer-reviewed articles reporting outcomes scoring, complications, fusion status, long-term follow-up, and radiographic assessments related to XLIF. Published XLIF results were summarized and evaluated with current study data. A total of 84 XLIF patients were included in the current cohort analysis. OR time, EBL, and length of hospital stay averaged 199 minutes, 155 mL, and 2.6 days, respectively, and perioperative and postoperative complication rates were 2.4% and 6.1%. Mean follow-up was 15.7 months. Sixty-eight patients showed evidence of solid arthrodesis and no subsidence on computed tomography and flexion/extension radiographs. Results were within the ranges of those in the literature. Literature review identified reports of significant improvements in clinical outcomes scores, radiographic measures, and cost effectiveness. Current data corroborates and contributes to the existing body of literature describing XLIF outcomes. Procedures are generally performed with short OR times, minimal EBL, and few complications. Patients recover quickly, requiring minimal hospital stay, although transient hip

Technical Manual for the SAM Physical Trough Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, M. J.; Gilman, P.

2011-06-01

NREL, in conjunction with Sandia National Lab and the U.S Department of Energy, developed the System Advisor Model (SAM) analysis tool for renewable energy system performance and economic analysis. This paper documents the technical background and engineering formulation for one of SAM's two parabolic trough system models in SAM. The Physical Trough model calculates performance relationships based on physical first principles where possible, allowing the modeler to predict electricity production for a wider range of component geometries than is possible in the Empirical Trough model. This document describes the major parabolic trough plant subsystems in detail including the solar field,more » power block, thermal storage, piping, auxiliary heating, and control systems. This model makes use of both existing subsystem performance modeling approaches, and new approaches developed specifically for SAM.« less

Learning health 'safety' within non-technical skills interprofessional simulation education: a qualitative study.

PubMed

Gordon, Morris; Fell, Christopher W R; Box, Helen; Farrell, Michael; Stewart, Alison

2017-01-01

Healthcare increasingly recognises and focusses on the phenomena of 'safe practice' and 'patient safety.' Success with non-technical skills (NTS) training in other industries has led to widespread transposition to healthcare education, with communication and teamwork skills central to NTS frameworks. This study set out to identify how the context of interprofessional simulation learning influences NTS acquisition and development of 'safety' amongst learners. Participants receiving a non-technical skills (NTS) safety focussed training package were invited to take part in a focus group interview which set out to explore communication, teamwork, and the phenomenon of safety in the context of the learning experiences they had within the training programme. The analysis was aligned with a constructivist paradigm and took an interactive methodological approach. The analysis proceeded through three stages, consisting of open, axial, and selective coding, with constant comparisons taking place throughout each phase. Each stage provided categories that could be used to explore the themes of the data. Additionally, to ensure thematic saturation, transcripts of observed simulated learning encounters were then analysed. Six themes were established at the axial coding level, i.e., analytical skills, personal behaviours, communication, teamwork, context, and pedagogy. Underlying these themes, two principal concepts emerged, namely: intergroup contact anxiety - as both a result of and determinant of communication - and teamwork, both of which must be considered in relation to context. These concepts have subsequently been used to propose a framework for NTS learning. This study highlights the role of intergroup contact anxiety and teamwork as factors in NTS behaviour and its dissipation through interprofessional simulation learning. Therefore, this should be a key consideration in NTS education. Future research is needed to consider the role of the affective non-technical

Laparoscopic intersphincteric resection: indications and results.

PubMed

Scala, Dario; Niglio, Antonello; Pace, Ugo; Ruffolo, Fulvio; Rega, Daniela; Delrio, Paolo

2016-03-01

Surgical treatment of distal rectal cancer has long been based only on abdominoperineal excision, resulting in a permanent stoma and not always offering a definitive local control. Sphincter saving surgery has emerged in the last 20 years and can be offered also to patients with low lying tumours, provided that the external sphincter is not involved by the disease. An intersphincteric resection (ISR) is based on the resection of the rectum with a distal dissection proceeding into the space between the internal and the external anal sphincter. Originally described as an open procedure, it has also been developed with the laparoscopic approach, and also this technically demanding procedure is inscribed among those offered to the patient by a minimally invasive surgery. Indications have to be strict and patient selection is crucial to obtain both oncological and functional optimal results. The level of distal dissection and the extent of internal sphincter resected are chosen according to the distal margin of the tumour and is based on MRI findings: accurate imaging is therefore mandatory to better define the surgical approach. We here present our actual indications for ISR, results in terms of operative time, median hospital stay for ISR in our experience and review the updated literature.

Technical indicators of economic performance in dairy sheep farming.

PubMed

Theodoridis, A; Ragkos, A; Roustemis, D; Arsenos, G; Abas, Z; Sinapis, E

2014-01-01

In this study, the level of technical efficiency of 58 sheep farms rearing the Chios breed in Greece was measured through the application of the stochastic frontier analysis method. A Translog stochastic frontier production function was estimated using farm accounting data of Chios sheep farms and the impact of various socio-demographic and biophysical factors on the estimated efficiency of the farms was evaluated. The farms were classified into efficiency groups on the basis of the estimated level of efficiency and a technical and economic descriptive analysis was applied in order to illustrate an indicative picture of their structure and productivity. The results of the stochastic frontier model indicate that there are substantial production inefficiencies among the Chios sheep farms and that these farms could increase their production through the improvement of technical efficiency, whereas the results of the inefficiency effects model reveal that the farm-specific explanatory factors can partly explain the observed efficiency differentials. The measurement of technical inefficiency and the detection of its determinants can be used to form the basis of policy recommendations that could contribute to the development of the sector.

Microsurgical Resection of Suprasellar Craniopharyngioma-Technical Purview.

PubMed

Nanda, Anil; Narayan, Vinayak; Mohammed, Nasser; Savardekar, Amey R; Patra, Devi Prasad

2018-04-01

Objectives  Complete surgical resection is an important prognostic factor for recurrence and is the best management for craniopharyngioma. This operative video demonstrates the technical nuances in achieving complete resection of a suprasellar craniopharyngioma. Design and Setting  The surgery was performed in a middle-aged lady who presented with the history of progressive bitemporal hemianopia and excessive sleepiness over 8 months. On imaging, suprasellar craniopharyngioma was identified. The tumor was approached through opticocarotid cistern and lamina terminalis. Exposure of bilateral optic nerves, right internal carotid artery, anterior cerebral artery, and its perforator branches was then afforded and the tumor was gross totally resected. Results  The author demonstrates step-by-step technique of microsurgical resection of suprasellar craniopharyngioma. The narrow corridor to deeper structures, intricacies of multiple perforator vessels, and the technique of arachnoid and capsule dissection are the main challenging factors for the gross total resection of craniopharyngioma. The tumor portion which lies under the ipsilateral optic nerve is a blind spot region with a high chance of leaving residual tumor. Mobilization of optic nerve may endanger visual function too. The use of handheld mirror ['mirror-technique'] helps in better visualization of this blind spot and achieve complete excision. Conclusions  The technical pearls of craniopharyngioma surgery include the optimum utilization of translamina terminalis route, wide opening of the cisterns, meticulous separation of deep perforator vessels, capsular mobilization/traction avoidance, and the use of "mirror-technique" for blind-spot visualization. These surgical strategies help to achieve complete resection without causing neurological deficit. The link to the video can be found at: https://youtu.be/9wHJ4AUpG50 .

Systems approach used in the Gas Centrifuge Enrichment Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rooks, W.A. Jr.

A requirement exists for effective and efficient transfer of technical knowledge from the design engineering team to the production work force. Performance-Based Training (PBT) is a systematic approach to the design, development, and implementation of technical training. This approach has been successfully used by the US Armed Forces, industry, and other organizations. The advantages of the PBT approach are: cost-effectiveness (lowest life-cycle training cost), learning effectiveness, reduced implementation time, and ease of administration. The PBT process comprises five distinctive and rigorous phases: Analysis of Job Performance, Design of Instructional Strategy, Development of Training Materials and Instructional Media, Validation of Materialsmore » and Media, and Implementation of the Instructional Program. Examples from the Gas Centrifuge Enrichment Plant (GCEP) are used to illustrate the application of PBT.« less

Technical Evaluation Motor No. 7 (TEM-07)

NASA Technical Reports Server (NTRS)

Hugh, Phil

1991-01-01

Technical Evaluation Motor Number 7 (TEM-7) was a full scale, full-duration static test firing of a high performance motor (HPM) configuration solid rocket motor (SRM) with nozzle vectoring. The static test fire occurred on 11 December 1990 at the Thiokol Corporation Static Test Bay T-97. Documented here are the procedures, performance, and results available through 22 January 1991. Critical post test hardware activities and assessment of the test data are not complete. A completed test report will be submitted 60 days after the test date. Included here is a presentation and discussion of the TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107 Revision A, Space Shuttle Technical Evaluation Motor number 7 (TEM-07) Static Fire Test Plan.

Technical Mathematics: Restructure of Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

REPORT OF FINDINGS AND RESULTS OF TECHNICAL EDUCATION CURRICULUM WORKSHOP (LOS ALAMOS, NEW MEXICO, AUGUST 7-11, 1967).

ERIC Educational Resources Information Center

HARDWICK, ARTHUR LEE

AT THIS WORKSHOP OF INDUSTRIAL REPRESENTATIVE AND TECHNICAL EDUCATORS, A TECHNICIAN WAS DEFINED AS ONE WITH BROAD-BASED MATHEMATICAL AND SCIENTIFIC TRAINING AND WITH COMPETENCE TO SUPPORT PROFESSIONAL SYSTEMS, ENGINEERING, AND OTHER SCIENTIFIC PERSONNEL. HE SHOULD RECEIVE A RIGOROUS, 2-YEAR, POST SECONDARY EDUCATION ESPECIALLY DESIGNED FOR HIS…

Technical and Policy Approaches to Balancing Patient Privacy and Data Sharing in Clinical and Translational Research