A numerical fragment basis approach to SCF calculations.

NASA Astrophysics Data System (ADS)

Hinde, Robert J.

1997-11-01

The counterpoise method is often used to correct for basis set superposition error in calculations of the electronic structure of bimolecular systems. One drawback of this approach is the need to specify a ``reference state'' for the system; for reactive systems, the choice of an unambiguous reference state may be difficult. An example is the reaction F^- + HCl arrow HF + Cl^-. Two obvious reference states for this reaction are F^- + HCl and HF + Cl^-; however, different counterpoise-corrected interaction energies are obtained using these two reference states. We outline a method for performing SCF calculations which employs numerical basis functions; this method attempts to eliminate basis set superposition errors in an a priori fashion. We test the proposed method on two one-dimensional, three-center systems and discuss the possibility of extending our approach to include electron correlation effects.

Monitored Natural Attenuation of Inorganic Contaminants in Ground Water Volume 1 – Technical Basis for Assessment

EPA Science Inventory

This document represents the first volume of a set of three volumes that address the technical basis and requirements for assessing the potential applicability of MNA as part of a ground-water remedy for plumes with non-radionuclide and/or radionuclide inorganic contaminants. Vo...

Radiological Exposure Devices (RED) Technical Basis for Threat Profile.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bland, Jesse John; Potter, Charles A.; Homann, Steven

Facilities that manufacture, store or transport significant quantities of radiological material must protect against the risk posed by sabotage events. Much of the analysis of this type of event has been focused on the threat from a radiological dispersion device (RDD) or "dirty bomb" scenario, in which a malicious assailant would, by explosives or other means, loft a significant quantity of radioactive material into a plume that would expose and contaminate people and property. Although the consequences in cost and psychological terror would be severe, no intentional RDD terrorism events are on record. Conversely, incidents in which a victim ormore » victims were maliciously exposed to a Radiological Exposure Device (RED), without dispersal of radioactive material, are well documented. This paper represents a technical basis for the threat profile related to the risk of nefarious use of an RED, including assailant and material characterization. Radioactive materials of concern are detailed in Appendix A.« less

A Socio-technical Approach for Transient SME Alliances

NASA Astrophysics Data System (ADS)

Rezgui, Yacine

The paper discusses technical requirements to promote the adoption of alliance modes of operation by SMEs in the construction sector. These requirements have provided a basis for specifying a set of functionality to support the collaboration and cooperation needs of SMEs. While service-oriented architectures and semantic web services provide the middleware technology to implement the identified functionality, a number of key technical limitations have been identified, including lack of support for the dynamic and non-functional characteristics of SME alliances distributed business processes, lack of execution monitoring functionality to manage running business processes, and lack of support for semantic reasoning to enable SME business process service composition. The paper examines these issues and provides key directions for supporting SME alliances effectively.

Technical approach to groundwater restoration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) andmore » minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures.« less

Approaching the basis set limit for DFT calculations using an environment-adapted minimal basis with perturbation theory: Formulation, proof of concept, and a pilot implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mao, Yuezhi; Horn, Paul R.; Mardirossian, Narbe

2016-07-28

Recently developed density functionals have good accuracy for both thermochemistry (TC) and non-covalent interactions (NC) if very large atomic orbital basis sets are used. To approach the basis set limit with potentially lower computational cost, a new self-consistent field (SCF) scheme is presented that employs minimal adaptive basis (MAB) functions. The MAB functions are optimized on each atomic site by minimizing a surrogate function. High accuracy is obtained by applying a perturbative correction (PC) to the MAB calculation, similar to dual basis approaches. Compared to exact SCF results, using this MAB-SCF (PC) approach with the same large target basis set producesmore » <0.15 kcal/mol root-mean-square deviations for most of the tested TC datasets, and <0.1 kcal/mol for most of the NC datasets. The performance of density functionals near the basis set limit can be even better reproduced. With further improvement to its implementation, MAB-SCF (PC) is a promising lower-cost substitute for conventional large-basis calculations as a method to approach the basis set limit of modern density functionals.« less

Hanford Technical Basis for Multiple Dosimetry Effective Dose Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, Robin L.; Rathbone, Bruce A.

2010-08-01

The current method at Hanford for dealing with the results from multiple dosimeters worn during non-uniform irradiation is to use a compartmentalization method to calculate the effective dose (E). The method, as documented in the current version of Section 6.9.3 in the 'Hanford External Dosimetry Technical Basis Manual, PNL-MA-842,' is based on the compartmentalization method presented in the 1997 ANSI/HPS N13.41 standard, 'Criteria for Performing Multiple Dosimetry.' With the adoption of the ICRP 60 methodology in the 2007 revision to 10 CFR 835 came changes that have a direct affect on the compartmentalization method described in the 1997 ANSI/HPS N13.41more » standard, and, thus, to the method used at Hanford. The ANSI/HPS N13.41 standard committee is in the process of updating the standard, but the changes to the standard have not yet been approved. And, the drafts of the revision of the standard tend to align more with ICRP 60 than with the changes specified in the 2007 revision to 10 CFR 835. Therefore, a revised method for calculating effective dose from non-uniform external irradiation using a compartmental method was developed using the tissue weighting factors and remainder organs specified in 10 CFR 835 (2007).« less

Designing water demand management schemes using a socio-technical modelling approach.

PubMed

Baki, Sotiria; Rozos, Evangelos; Makropoulos, Christos

2018-05-01

Although it is now widely acknowledged that urban water systems (UWSs) are complex socio-technical systems and that a shift towards a socio-technical approach is critical in achieving sustainable urban water management, still, more often than not, UWSs are designed using a segmented modelling approach. As such, either the analysis focuses on the description of the purely technical sub-system, without explicitly taking into account the system's dynamic socio-economic processes, or a more interdisciplinary approach is followed, but delivered through relatively coarse models, which often fail to provide a thorough representation of the urban water cycle and hence cannot deliver accurate estimations of the hydrosystem's responses. In this work we propose an integrated modelling approach for the study of the complete socio-technical UWS that also takes into account socio-economic and climatic variability. We have developed an integrated model, which is used to investigate the diffusion of household water conservation technologies and its effects on the UWS, under different socio-economic and climatic scenarios. The integrated model is formed by coupling a System Dynamics model that simulates the water technology adoption process, and the Urban Water Optioneering Tool (UWOT) for the detailed simulation of the urban water cycle. The model and approach are tested and demonstrated in an urban redevelopment area in Athens, Greece under different socio-economic scenarios and policy interventions. It is suggested that the proposed approach can establish quantifiable links between socio-economic change and UWS responses and therefore assist decision makers in designing more effective and resilient long-term strategies for water conservation. Copyright © 2017 Elsevier B.V. All rights reserved.

NPR design basis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Locke, G.L.

1958-09-08

The design basis is composed of requirements and conditions for the design of the reactor plant (composed of the reactor and heat dissipation system). Its intent is to insure that the final product meets the economic, safety, and technical objectives of the project. The design basis is dependent on the ground rules, objectives, technical criteria, and practical design considerations. This document is being issued with the understanding that these items are not yet firmly established in all respects, and therefore, the numbers put down here are subject to change. Consideration of the spectrum of probable changes that might be mademore » leads to the conclusion that the numbers here are close to the final ones and are satisfactory as a basis for the initial stages of design. Some numbers are omitted because of insufficient data at this time.« less

Engineer's Needs for Scientific and Technical Information.

ERIC Educational Resources Information Center

David, A., Ed.; And Others

This study has as its main object the formulation of an approach, as global and comprehensive as possible, to the multiple aspects of the engineer's needs for scientific and technical information. The basis of the study is an analysis of the engineer's role, its characteristics, different specialties, levels of training, and categories of…

Conceptualizing the Organizational Role of Technical Communicators: A Systems Approach.

ERIC Educational Resources Information Center

Harrison, Teresa M.; Debs, Mary Beth

1988-01-01

Uses a systems approach to organizational theory to argue that technical communicators function as "boundary spanners," who make sense of and disseminate information required for coordination between organizational groups, and for effective responses to the environment. (JAD)

An Herbal Derivative as the Basis for a New Approach to Treating Post-Traumatic Osteoarthritis

DTIC Science & Technology

2016-09-01

AWARD NUMBER: W81XWH-15-1-0397 TITLE: An Herbal Derivative as the Basis for a New Approach to Treating Post- Traumatic Osteoarthritis...SUBTITLE An Herbal Derivative as the Basis for a New Approach to Treating Post- Traumatic Osteoarthritis 5a. CONTRACT NUMBER 5b. GRANT NUMBER

An Herbal Derivative as the Basis for a New Approach to Treating Post-Traumatic Osteoarthritis

DTIC Science & Technology

2017-09-01

AWARD NUMBER: W81XWH-15-1-0397 TITLE: An Herbal Derivative as the Basis for a New Approach to Treating Post - Traumatic Osteoarthritis...TITLE AND SUBTITLE An Herbal Derivative as the Basis for a New Approach to Treating Post - Traumatic Osteoarthritis 5a. CONTRACT NUMBER 5b. GRANT...responsible for charging tRNAs with the amino acid proline. The goal of this grant is to test the hypothesis that EPRS inhibitors will provide the basis

An Herbal Derivative as the Basis for a New Approach to Treating Post Traumatic Osteoarthritis

DTIC Science & Technology

2016-09-01

AWARD NUMBER: W81XWH-15-1-0396 TITLE: An Herbal Derivative as the Basis for a New Approach to Treating Post- Traumatic Osteoarthritis...TITLE AND SUBTITLE An Herbal Derivative as the Basis for a New Approach to Treating Post- Traumatic Osteoarthritis 5a. CONTRACT NUMBER 5b. GRANT NUMBER

Optimized technical and scientific design approach for high performance anticoincidence shields

NASA Astrophysics Data System (ADS)

Graue, Roland; Stuffler, Timo; Monzani, Franco; Bastia, Paolo; Gryksa, Werner; Pahl, Germit

2018-04-01

This paper, "Optimized technical and scientific design approach for high performance anticoincidence shields," was presented as part of International Conference on Space Optics—ICSO 1997, held in Toulouse, France.

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data

PubMed Central

Vallejos, Catalina A.; Marioni, John C.; Richardson, Sylvia

2015-01-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell’s lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach. PMID:26107944

BASiCS: Bayesian Analysis of Single-Cell Sequencing Data.

PubMed

Vallejos, Catalina A; Marioni, John C; Richardson, Sylvia

2015-06-01

Single-cell mRNA sequencing can uncover novel cell-to-cell heterogeneity in gene expression levels in seemingly homogeneous populations of cells. However, these experiments are prone to high levels of unexplained technical noise, creating new challenges for identifying genes that show genuine heterogeneous expression within the population of cells under study. BASiCS (Bayesian Analysis of Single-Cell Sequencing data) is an integrated Bayesian hierarchical model where: (i) cell-specific normalisation constants are estimated as part of the model parameters, (ii) technical variability is quantified based on spike-in genes that are artificially introduced to each analysed cell's lysate and (iii) the total variability of the expression counts is decomposed into technical and biological components. BASiCS also provides an intuitive detection criterion for highly (or lowly) variable genes within the population of cells under study. This is formalised by means of tail posterior probabilities associated to high (or low) biological cell-to-cell variance contributions, quantities that can be easily interpreted by users. We demonstrate our method using gene expression measurements from mouse Embryonic Stem Cells. Cross-validation and meaningful enrichment of gene ontology categories within genes classified as highly (or lowly) variable supports the efficacy of our approach.

A Technical Analysis Information Fusion Approach for Stock Price Analysis and Modeling

NASA Astrophysics Data System (ADS)

Lahmiri, Salim

In this paper, we address the problem of technical analysis information fusion in improving stock market index-level prediction. We present an approach for analyzing stock market price behavior based on different categories of technical analysis metrics and a multiple predictive system. Each category of technical analysis measures is used to characterize stock market price movements. The presented predictive system is based on an ensemble of neural networks (NN) coupled with particle swarm intelligence for parameter optimization where each single neural network is trained with a specific category of technical analysis measures. The experimental evaluation on three international stock market indices and three individual stocks show that the presented ensemble-based technical indicators fusion system significantly improves forecasting accuracy in comparison with single NN. Also, it outperforms the classical neural network trained with index-level lagged values and NN trained with stationary wavelet transform details and approximation coefficients. As a result, technical information fusion in NN ensemble architecture helps improving prediction accuracy.

Technical approaches for measurement of human errors

NASA Technical Reports Server (NTRS)

Clement, W. F.; Heffley, R. K.; Jewell, W. F.; Mcruer, D. T.

1980-01-01

Human error is a significant contributing factor in a very high proportion of civil transport, general aviation, and rotorcraft accidents. The technical details of a variety of proven approaches for the measurement of human errors in the context of the national airspace system are presented. Unobtrusive measurements suitable for cockpit operations and procedures in part of full mission simulation are emphasized. Procedure, system performance, and human operator centered measurements are discussed as they apply to the manual control, communication, supervisory, and monitoring tasks which are relevant to aviation operations.

Human System Simulation in Support of Human Performance Technical Basis at NPPs

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Gertman; Katya Le Blanc; alan mecham

2010-06-01

This paper focuses on strategies and progress toward establishing the Idaho National Laboratory’s (INL’s) Human Systems Simulator Laboratory at the Center for Advanced Energy Studies (CAES), a consortium of Idaho State Universities. The INL is one of the National Laboratories of the US Department of Energy. One of the first planned applications for the Human Systems Simulator Laboratory is implementation of a dynamic nuclear power plant simulation (NPP) where studies of operator workload, situation awareness, performance and preference will be carried out in simulated control rooms including nuclear power plant control rooms. Simulation offers a means by which to reviewmore » operational concepts, improve design practices and provide a technical basis for licensing decisions. In preparation for the next generation power plant and current government and industry efforts in support of light water reactor sustainability, human operators will be attached to a suite of physiological measurement instruments and, in combination with traditional Human Factors Measurement techniques, carry out control room tasks in simulated advanced digital and hybrid analog/digital control rooms. The current focus of the Human Systems Simulator Laboratory is building core competence in quantitative and qualitative measurements of situation awareness and workload. Of particular interest is whether introduction of digital systems including automated procedures has the potential to reduce workload and enhance safety while improving situation awareness or whether workload is merely shifted and situation awareness is modified in yet to be determined ways. Data analysis is carried out by engineers and scientists and includes measures of the physical and neurological correlates of human performance. The current approach supports a user-centered design philosophy (see ISO 13407 “Human Centered Design Process for Interactive Systems, 1999) wherein the context for task performance along

Technical Efficiency and Organ Transplant Performance: A Mixed-Method Approach

PubMed Central

de-Pablos-Heredero, Carmen; Fernández-Renedo, Carlos; Medina-Merodio, Jose-Amelio

2015-01-01

Mixed methods research is interesting to understand complex processes. Organ transplants are complex processes in need of improved final performance in times of budgetary restrictions. As the main objective a mixed method approach is used in this article to quantify the technical efficiency and the excellence achieved in organ transplant systems and to prove the influence of organizational structures and internal processes in the observed technical efficiency. The results show that it is possible to implement mechanisms for the measurement of the different components by making use of quantitative and qualitative methodologies. The analysis show a positive relationship between the levels related to the Baldrige indicators and the observed technical efficiency in the donation and transplant units of the 11 analyzed hospitals. Therefore it is possible to conclude that high levels in the Baldrige indexes are a necessary condition to reach an increased level of the service offered. PMID:25950653

Parallel Algorithms for Groebner-Basis Reduction

DTIC Science & Technology

1987-09-25

22209 ELEMENT NO. NO. NO. ACCESSION NO. 11. TITLE (Include Security Classification) * PARALLEL ALGORITHMS FOR GROEBNER -BASIS REDUCTION 12. PERSONAL...All other editions are obsolete. Productivity Engineering in the UNIXt Environment p Parallel Algorithms for Groebner -Basis Reduction Technical Report

Estimating the CCSD basis-set limit energy from small basis sets: basis-set extrapolations vs additivity schemes

NASA Astrophysics Data System (ADS)

Spackman, Peter R.; Karton, Amir

2015-05-01

Coupled cluster calculations with all single and double excitations (CCSD) converge exceedingly slowly with the size of the one-particle basis set. We assess the performance of a number of approaches for obtaining CCSD correlation energies close to the complete basis-set limit in conjunction with relatively small DZ and TZ basis sets. These include global and system-dependent extrapolations based on the A + B/Lα two-point extrapolation formula, and the well-known additivity approach that uses an MP2-based basis-set-correction term. We show that the basis set convergence rate can change dramatically between different systems(e.g.it is slower for molecules with polar bonds and/or second-row elements). The system-dependent basis-set extrapolation scheme, in which unique basis-set extrapolation exponents for each system are obtained from lower-cost MP2 calculations, significantly accelerates the basis-set convergence relative to the global extrapolations. Nevertheless, we find that the simple MP2-based basis-set additivity scheme outperforms the extrapolation approaches. For example, the following root-mean-squared deviations are obtained for the 140 basis-set limit CCSD atomization energies in the W4-11 database: 9.1 (global extrapolation), 3.7 (system-dependent extrapolation), and 2.4 (additivity scheme) kJ mol-1. The CCSD energy in these approximations is obtained from basis sets of up to TZ quality and the latter two approaches require additional MP2 calculations with basis sets of up to QZ quality. We also assess the performance of the basis-set extrapolations and additivity schemes for a set of 20 basis-set limit CCSD atomization energies of larger molecules including amino acids, DNA/RNA bases, aromatic compounds, and platonic hydrocarbon cages. We obtain the following RMSDs for the above methods: 10.2 (global extrapolation), 5.7 (system-dependent extrapolation), and 2.9 (additivity scheme) kJ mol-1.

A Novel Interdisciplinary Approach to Socio-Technical Complexity

NASA Astrophysics Data System (ADS)

Bassetti, Chiara

The chapter presents a novel interdisciplinary approach that integrates micro-sociological analysis into computer-vision and pattern-recognition modeling and algorithms, the purpose being to tackle socio-technical complexity at a systemic yet micro-grounded level. The approach is empirically-grounded and both theoretically- and analytically-driven, yet systemic and multidimensional, semi-supervised and computable, and oriented towards large scale applications. The chapter describes the proposed approach especially as for its sociological foundations, and as applied to the analysis of a particular setting --i.e. sport-spectator crowds. Crowds, better defined as large gatherings, are almost ever-present in our societies, and capturing their dynamics is crucial. From social sciences to public safety management and emergency response, modeling and predicting large gatherings' presence and dynamics, thus possibly preventing critical situations and being able to properly react to them, is fundamental. This is where semi/automated technologies can make the difference. The work presented in this chapter is intended as a scientific step towards such an objective.

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: GUIDANCE DOCUMENT

EPA Science Inventory

NRMRL-CIN-1741 SAIC. Technical Approaches to Characterizing and Cleaning up Brownfields Sites. EPA/625/R/00/009 (NTIS PB2002-105021) , Available: 68-C7-0011. The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the p...

An Herbal Derivative as the Basis for a New Approach to Treating Post-Traumatic Osteoarthritis

DTIC Science & Technology

2017-09-01

OA 3) A new ex vivo assay using intact joint cartilage to test ex vivo efficacy of EPRS inhibitors as therapeutics for OA. 15. SUBJECT TERMS Post ...AWARD NUMBER: W81XWH-15-1-0396 TITLE: An Herbal Derivative as the Basis for a New Approach to Treating Post - Traumatic Osteoarthritis...TITLE AND SUBTITLE An Herbal Derivative as the Basis for a New Approach to Treating Post - Traumatic Osteoarthritis 5a. CONTRACT NUMBER 5b. GRANT NUMBER

Whole-coal versus ash basis in coal geochemistry: a mathematical approach to consistent interpretations

USGS Publications Warehouse

Geboy, Nicholas J.; Engle, Mark A.; Hower, James C.

2013-01-01

Several standard methods require coal to be ashed prior to geochemical analysis. Researchers, however, are commonly interested in the compositional nature of the whole-coal, not its ash. Coal geochemical data for any given sample can, therefore, be reported in the ash basis on which it is analyzed or the whole-coal basis to which the ash basis data are back calculated. Basic univariate (mean, variance, distribution, etc.) and bivariate (correlation coefficients, etc.) measures of the same suite of samples can be very different depending which reporting basis the researcher uses. These differences are not real, but an artifact resulting from the compositional nature of most geochemical data. The technical term for this artifact is subcompositional incoherence. Since compositional data are forced to a constant sum, such as 100% or 1,000,000 ppm, they possess curvilinear properties which make the Euclidean principles on which most statistical tests rely inappropriate, leading to erroneous results. Applying the isometric logratio (ilr) transformation to compositional data allows them to be represented in Euclidean space and evaluated using traditional tests without fear of producing mathematically inconsistent results. When applied to coal geochemical data, the issues related to differences between the two reporting bases are resolved as demonstrated in this paper using major oxide and trace metal data from the Pennsylvanian-age Pond Creek coal of eastern Kentucky, USA. Following ilr transformation, univariate statistics, such as mean and variance, still differ between the ash basis and whole-coal basis, but in predictable and calculated manners. Further, the stability between two different components, a bivariate measure, is identical, regardless of the reporting basis. The application of ilr transformations addresses both the erroneous results of Euclidean-based measurements on compositional data as well as the inconsistencies observed on coal geochemical data

Estimating the CCSD basis-set limit energy from small basis sets: basis-set extrapolations vs additivity schemes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spackman, Peter R.; Karton, Amir, E-mail: amir.karton@uwa.edu.au

Coupled cluster calculations with all single and double excitations (CCSD) converge exceedingly slowly with the size of the one-particle basis set. We assess the performance of a number of approaches for obtaining CCSD correlation energies close to the complete basis-set limit in conjunction with relatively small DZ and TZ basis sets. These include global and system-dependent extrapolations based on the A + B/L{sup α} two-point extrapolation formula, and the well-known additivity approach that uses an MP2-based basis-set-correction term. We show that the basis set convergence rate can change dramatically between different systems(e.g.it is slower for molecules with polar bonds and/ormore » second-row elements). The system-dependent basis-set extrapolation scheme, in which unique basis-set extrapolation exponents for each system are obtained from lower-cost MP2 calculations, significantly accelerates the basis-set convergence relative to the global extrapolations. Nevertheless, we find that the simple MP2-based basis-set additivity scheme outperforms the extrapolation approaches. For example, the following root-mean-squared deviations are obtained for the 140 basis-set limit CCSD atomization energies in the W4-11 database: 9.1 (global extrapolation), 3.7 (system-dependent extrapolation), and 2.4 (additivity scheme) kJ mol{sup –1}. The CCSD energy in these approximations is obtained from basis sets of up to TZ quality and the latter two approaches require additional MP2 calculations with basis sets of up to QZ quality. We also assess the performance of the basis-set extrapolations and additivity schemes for a set of 20 basis-set limit CCSD atomization energies of larger molecules including amino acids, DNA/RNA bases, aromatic compounds, and platonic hydrocarbon cages. We obtain the following RMSDs for the above methods: 10.2 (global extrapolation), 5.7 (system-dependent extrapolation), and 2.9 (additivity scheme) kJ mol{sup –1}.« less

Robotic transanal endoscopic microsurgery: technical details for the lateral approach.

PubMed

Buchs, Nicolas C; Pugin, François; Volonte, Francesco; Hagen, Monika E; Morel, Philippe; Ris, Frederic

2013-10-01

Transanal endoscopic microsurgery is a minimally invasive approach reserved for the resection of selected rectal tumors. However, this approach is technically demanding. Although robotic technology may overcome the limitations of this approach, the system can be difficult to dock, especially in the lithotomy position. The study aim is thus to report the technical details of robotic transanal endoscopic microsurgery with the use of a lateral approach. This study is a prospective evaluation of robotic transanal endoscopic microsurgery in a single tertiary institution, under a protocol approved by our local ethics committee. Patients underwent a routine mechanical bowel preparation and were placed in the left or right lateral position according to the tumor location. A circular anal dilatator was used together with the glove port technique. The robotic system was then docked over the hip. A 30° optic and 2 articulated instruments were used with an additional assistant trocar. The tumor excision was realized with an atraumatic grasper and an articulated cautery hook, and the defect was closed with barbed continuous stiches in each case. The primary outcome was the safety and feasibility of the procedure. Three patients underwent a robotic transanal endoscopic microsurgery with the use of the lateral approach. Mean operative time was 110 minutes, including 20 minutes for the docking of the robot. There was 1 intraoperative complication (a pneumoperitoneum without intraabdominal lesion) and no postoperative complications. Mean hospital stay was 3 days. Margins were negative in all the cases. The study was limited by the small number of patients. Robotic transanal endoscopic microsurgery with use of the lateral approach is feasible and may facilitate the local resection of small lesions of the mid and lower rectum. It might assume an important place in sphincter-preserving surgery, especially for selected and early rectal cancer (see Video, Supplemental Digital Content 1

Composite fermion basis for two-component Bose gases

NASA Astrophysics Data System (ADS)

Meyer, Marius; Liabotro, Ola

The composite fermion (CF) construction is known to produce wave functions that are not necessarily orthogonal, or even linearly independent, after projection. While usually not a practical issue in the quantum Hall regime, we have previously shown that it presents a technical challenge for rotating Bose gases with low angular momentum. These are systems where the CF approach yield surprisingly good approximations to the exact eigenstates of weak short-range interactions, and so solving the problem of linearly dependent wave functions is of interest. It can also be useful for studying CF excitations for fermions. Here we present several ways of constructing a basis for the space of ``simple CF states'' for two-component rotating Bose gases in the lowest Landau level, and prove that they all give a basis. Using the basis, we study the structure of the lowest-lying state using so-called restricted wave functions. We also examine the scaling of the overlap between the exact and CF wave functions at the maximal possible angular momentum for simple states. This work was financially supported by the Research Council of Norway.

Polyptych Construction as Historical Methodology: An Intertextual Approach to the Stories of Central Technical School's Past

ERIC Educational Resources Information Center

Garnet, Dustin

2015-01-01

Adopting the lens of "new histories" as the basis for my inquiry into the institutional legacy of the art program at Toronto's Central Technical School (CTS), I created a methodological framework informed by the traditional art form of the polyptych, in which many panels are joined together to show and tell multilayered stories connected…

Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

DOE Office of Scientific and Technical Information (OSTI.GOV)

OHara, J.M.; Higgins, J.C.

Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation.more » The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.« less

Approaches to ICT-Enhanced Teaching in Technical and Vocational Education: A Phenomenographic Perspective

ERIC Educational Resources Information Center

Khan, Md. Shahadat Hossain; Markauskaite, Lina

2017-01-01

This paper presents the results of a study undertaken from a phenomenographic perspective, which examines teachers' approaches to information communication technology (ICT)-enhanced teaching in vocational tertiary education. Twenty-three teachers from three Australian Technical and Further Education (TAFE) institutions participated in…

COMSATCOM service technical baseline strategy development approach using PPBW concept

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.

2016-05-01

This paper presents an innovative approach to develop a Commercial Satellite Communications (COMSATCOM) service Technical Baseline (TB) and associated Program Baseline (PB) strategy using Portable Pool Bandwidth (PPBW) concept. The concept involves trading of the purchased commercial transponders' Bandwidths (BWs) with existing commercial satellites' bandwidths participated in a "designated pool bandwidth"3 according to agreed terms and conditions. Space Missile Systems Center (SMC) has been implementing the Better Buying Power (BBP 3.0) directive4 and recommending the System Program Offices (SPO) to own the Program and Technical Baseline (PTB) [1, 2] for the development of flexible acquisition strategy and achieving affordability and increased in competition. This paper defines and describes the critical PTB parameters and associated requirements that are important to the government SPO for "owning" an affordable COMSATCOM services contract using PPBW trading concept. The paper describes a step-by-step approach to optimally perform the PPBW trading to meet DoD and its stakeholders (i) affordability requirement, and (ii) fixed and variable bandwidth requirements by optimizing communications performance, cost and PPBW accessibility in terms of Quality of Services (QoS), Bandwidth Sharing Ratio (BSR), Committed Information Rate (CIR), Burstable Information Rate (BIR), Transponder equivalent bandwidth (TPE) and transponder Net Presence Value (NPV). The affordable optimal solution that meets variable bandwidth requirements will consider the operating and trading terms and conditions described in the Fair Access Policy (FAP).

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

PubMed

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Endoscopic and Keyhole Endoscope-assisted Neurosurgical Approaches: A Qualitative Survey on Technical Challenges and Technological Solutions

PubMed Central

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-01-01

Introduction The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. Materials and Methods All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent themes analysis. Results Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). Discussion The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Conclusions Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches. PMID:24533591

Transperitoneal Laparoscopic Approach to the Perinephric Area in Children: Technical Report and Lessons Learned.

PubMed

Mattioli, Girolamo; Avanzini, Stefano; Pio, Luca; Costanzo, Sara; Faticato, Maria Grazia; Montobbio, Giovanni; Disma, Nicola; Buffa, Piero

2015-10-01

This study presents a technical report of a standardized approach to the perinephric area in a series of pediatric patients, demonstrating that whatever renal or suprarenal surgery is planned, this can be approached and accomplished laparoscopically with an identical or very similar port triangulation, thus facilitating the learning curve within the same surgical team. All patients undergoing renal and adrenal gland surgery with a minimally invasive approach in the period from October 2008 to November 2013 were retrospectively reviewed and included in the study. Technical details and clinical outcomes are described. In total, 68 patients matched the inclusion criteria and were therefore retrospectively examined. No major intraoperative complication occurred. Two patients developed recurrent pelvic-ureteric junction obstruction and were managed with double J stent positioning and laparoscopic dismembered pyeloplasty, respectively. Two patients presenting with adrenal mass experienced a moderate bleeding that could be treated conservatively. Thanks to the reproducibility of the procedure and on the grounds of the presented experience, we support the proposal that the transperitoneal laparoscopic approach to the kidney and the adrenal gland could represent a relatively easy and safe way to quickly achieve confidence and skill in the management of related diseases.

Technical basis for the use of a correlated neutron source in the uranium neutron coincidence collar

DOE PAGES

Root, Margaret A.; Menlove, Howard Olsen; Lanza, Richard C.; ...

2017-01-16

Active neutron coincidence systems are commonly used by international inspectorates to verify a material balance across the various stages of the nuclear fuel cycle. The Uranium Neutron Coincidence Collar (UNCL) is one such instrument; it is used to measure the linear density of 235U (g 235U/cm of active length in assembly) in fresh light water reactor fuel in nuclear fuel fabrication facilities. The UNCL and other active neutron interrogation detectors have historically relied on americium lithium ( 241AmLi) sources to induce fission within the sample in question. Californium-252 is under consideration as a possible alternative to the traditional 241AmLi source.more » Finally, this work relied upon a combination of experiments and Monte Carlo simulations to demonstrate the technical basis for the replacement of 241AmLi sources with 252Cf sources by evaluating the statistical uncertainty in the measurements incurred by each source and assessing the penetrability of neutrons from each source for the UNCL.« less

Technical basis for the use of a correlated neutron source in the uranium neutron coincidence collar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Root, Margaret A.; Menlove, Howard Olsen; Lanza, Richard C.

Active neutron coincidence systems are commonly used by international inspectorates to verify a material balance across the various stages of the nuclear fuel cycle. The Uranium Neutron Coincidence Collar (UNCL) is one such instrument; it is used to measure the linear density of 235U (g 235U/cm of active length in assembly) in fresh light water reactor fuel in nuclear fuel fabrication facilities. The UNCL and other active neutron interrogation detectors have historically relied on americium lithium ( 241AmLi) sources to induce fission within the sample in question. Californium-252 is under consideration as a possible alternative to the traditional 241AmLi source.more » Finally, this work relied upon a combination of experiments and Monte Carlo simulations to demonstrate the technical basis for the replacement of 241AmLi sources with 252Cf sources by evaluating the statistical uncertainty in the measurements incurred by each source and assessing the penetrability of neutrons from each source for the UNCL.« less

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

NASA Astrophysics Data System (ADS)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Quantifying control effort of biological and technical movements: an information-entropy-based approach.

PubMed

Haeufle, D F B; Günther, M; Wunner, G; Schmitt, S

2014-01-01

In biomechanics and biorobotics, muscles are often associated with reduced movement control effort and simplified control compared to technical actuators. This is based on evidence that the nonlinear muscle properties positively influence movement control. It is, however, open how to quantify the simplicity aspect of control effort and compare it between systems. Physical measures, such as energy consumption, stability, or jerk, have already been applied to compare biological and technical systems. Here a physical measure of control effort based on information entropy is presented. The idea is that control is simpler if a specific movement is generated with less processed sensor information, depending on the control scheme and the physical properties of the systems being compared. By calculating the Shannon information entropy of all sensor signals required for control, an information cost function can be formulated allowing the comparison of models of biological and technical control systems. Exemplarily applied to (bio-)mechanical models of hopping, the method reveals that the required information for generating hopping with a muscle driven by a simple reflex control scheme is only I=32 bits versus I=660 bits with a DC motor and a proportional differential controller. This approach to quantifying control effort captures the simplicity of a control scheme and can be used to compare completely different actuators and control approaches.

Cost and technical efficiency of physician practices: a stochastic frontier approach using panel data.

PubMed

Heimeshoff, Mareike; Schreyögg, Jonas; Kwietniewski, Lukas

2014-06-01

This is the first study to use stochastic frontier analysis to estimate both the technical and cost efficiency of physician practices. The analysis is based on panel data from 3,126 physician practices for the years 2006 through 2008. We specified the technical and cost frontiers as translog function, using the one-step approach of Battese and Coelli to detect factors that influence the efficiency of general practitioners and specialists. Variables that were not analyzed previously in this context (e.g., the degree of practice specialization) and a range of control variables such as a patients' case-mix were included in the estimation. Our results suggest that it is important to investigate both technical and cost efficiency, as results may depend on the type of efficiency analyzed. For example, the technical efficiency of group practices was significantly higher than that of solo practices, whereas the results for cost efficiency differed. This may be due to indivisibilities in expensive technical equipment, which can lead to different types of health care services being provided by different practice types (i.e., with group practices using more expensive inputs, leading to higher costs per case despite these practices being technically more efficient). Other practice characteristics such as participation in disease management programs show the same impact throughout both cost and technical efficiency: participation in disease management programs led to an increase in both, technical and cost efficiency, and may also have had positive effects on the quality of care. Future studies should take quality-related issues into account.

PET/MRI – Technical Review

PubMed Central

Muzic, Raymond F.; DiFilippo, Frank P.

2015-01-01

PET/MR is a hybrid imaging technology with the potential to combine the molecular and functional information of PET with the soft-tissue contrast of MR. Herein we review the technical features and challenges of putting these different technologies together. We emphasize the conceptual to make the material accessible to a wide audience. We begin by reviewing PET/CT, a more mature multi-modality imaging technology, to provide a basis for comparison to the history of PET/MR development. We discuss the motivation and challenges of PET/MR and different approaches that have been used to meet the challenges. We conclude with a speculation about the future of this exciting imaging method. PMID:25497909

Do technical skills correlate with non-technical skills in crisis resource management: a simulation study.

PubMed

Riem, N; Boet, S; Bould, M D; Tavares, W; Naik, V N

2012-11-01

Both technical skills (TS) and non-technical skills (NTS) are key to ensuring patient safety in acute care practice and effective crisis management. These skills are often taught and assessed separately. We hypothesized that TS and NTS are not independent of each other, and we aimed to evaluate the relationship between TS and NTS during a simulated intraoperative crisis scenario. This study was a retrospective analysis of performances from a previously published work. After institutional ethics approval, 50 anaesthesiology residents managed a simulated crisis scenario of an intraoperative cardiac arrest secondary to a malignant arrhythmia. We used a modified Delphi approach to design a TS checklist, specific for the management of a malignant arrhythmia requiring defibrillation. All scenarios were recorded. Each performance was analysed by four independent experts. For each performance, two experts independently rated the technical performance using the TS checklist, and two other experts independently rated NTS using the Anaesthetists' Non-Technical Skills score. TS and NTS were significantly correlated to each other (r=0.45, P<0.05). During a simulated 5 min resuscitation requiring crisis resource management, our results indicate that TS and NTS are related to one another. This research provides the basis for future studies evaluating the nature of this relationship, the influence of NTS training on the performance of TS, and to determine whether NTS are generic and transferrable between crises that require different TS.

A Real-Life Basis for Reports in Business and Technical Writing.

ERIC Educational Resources Information Center

Stephenson, William

1987-01-01

For students who have difficulty finding material for writing formal business and technical reports, suggests keeping a file folder of clippings about new products and services taken from a leading newspaper.(NH)

Validation of column-based chromatography processes for the purification of proteins. Technical report No. 14.

PubMed

2008-01-01

PDA Technical Report No. 14 has been written to provide current best practices, such as application of risk-based decision making, based in sound science to provide a foundation for the validation of column-based chromatography processes and to expand upon information provided in Technical Report No. 42, Process Validation of Protein Manufacturing. The intent of this technical report is to provide an integrated validation life-cycle approach that begins with the use of process development data for the definition of operational parameters as a basis for validation, confirmation, and/or minor adjustment to these parameters at manufacturing scale during production of conformance batches and maintenance of the validated state throughout the product's life cycle.

Applied tagmemics: A heuristic approach to the use of graphic aids in technical writing

NASA Technical Reports Server (NTRS)

Brownlee, P. P.; Kirtz, M. K.

1981-01-01

In technical report writing, two needs which must be met if reports are to be useable by an audience are the language needs and the technical needs of that particular audience. A heuristic analysis helps to decide the most suitable format for information; that is, whether the information should be presented verbally or visually. The report writing process should be seen as an organic whole which can be divided and subdivided according to the writer's purpose, but which always functions as a totality. The tagmemic heuristic, because it itself follows a process of deconstructing and reconstructing information, lends itself to being a useful approach to the teaching of technical writing. By applying the abstract questions this heuristic asks to specific parts of the report. The language and technical needs of the audience are analyzed by examining the viability of the solution within the givens of the corporate structure, and by deciding which graphic or verbal format will best suit the writer's purpose. By following such a method, answers which are both specific and thorough in their range of application are found.

Impact of Research and Technical Change in Wildland Recreation: Evaluation Issues and Approaches

Treesearch

David N. Bengston; Zhi Xu

1993-01-01

The development and diffusion of new technologies have had tremendous impacts on wildland recreation in recent decades. This article examines the potential economic impacts of research and technical change in wildland recreation. Two evaluation models are presented, a cost-price approach and a research intensity model, which are intended to shed some light on the...

Strategic Mobility 21 Technical Plan

DTIC Science & Technology

2006-09-06

or grant. b. Technical documents with this statement may be made available or sold to the public and foreign nationals, companies, and governments ...including adversary governments , and may be exported. c. This statement may not be used on technical documents that formerly were classified...Transportation Technologies (CCDOTT), a government -industry academic collaborative enterprise. 2 Dual-use technology serves as a basis for both

A socio-technical approach to improving retail energy efficiency behaviours.

PubMed

Christina, Sian; Waterson, Patrick; Dainty, Andrew; Daniels, Kevin

2015-03-01

In recent years, the UK retail sector has made a significant contribution to societal responses on carbon reduction. We provide a novel and timely examination of environmental sustainability from a systems perspective, exploring how energy-related technologies and strategies are incorporated into organisational life. We use a longitudinal case study approach, looking at behavioural energy efficiency from within one of the UK's leading retailers. Our data covers a two-year period, with qualitative data from a total of 131 participants gathered using phased interviews and focus groups. We introduce an adapted socio-technical framework approach in order to describe an existing organisational behavioural strategy to support retail energy efficiency. Our findings point to crucial socio-technical and goal-setting factors which both impede and/or enable energy efficient behaviours, these include: tensions linked to store level perception of energy management goals; an emphasis on the importance of technology for underpinning change processes; and, the need for feedback and incentives to support the completion of energy-related tasks. We also describe the evolution of a practical operational intervention designed to address issues raised in our findings. Our study provides fresh insights into how sustainable workplace behaviours can be achieved and sustained over time. Secondly, we discuss in detail a set of issues arising from goal conflict in the workplace; these include the development of a practical energy management strategy to facilitate secondary organisational goals through job redesign. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

GRACE L1b inversion through a self-consistent modified radial basis function approach

NASA Astrophysics Data System (ADS)

Yang, Fan; Kusche, Juergen; Rietbroek, Roelof; Eicker, Annette

2016-04-01

Implementing a regional geopotential representation such as mascons or, more general, RBFs (radial basis functions) has been widely accepted as an efficient and flexible approach to recover the gravity field from GRACE (Gravity Recovery and Climate Experiment), especially at higher latitude region like Greenland. This is since RBFs allow for regionally specific regularizations over areas which have sufficient and dense GRACE observations. Although existing RBF solutions show a better resolution than classical spherical harmonic solutions, the applied regularizations cause spatial leakage which should be carefully dealt with. It has been shown that leakage is a main error source which leads to an evident underestimation of yearly trend of ice-melting over Greenland. Unlike some popular post-processing techniques to mitigate leakage signals, this study, for the first time, attempts to reduce the leakage directly in the GRACE L1b inversion by constructing an innovative modified (MRBF) basis in place of the standard RBFs to retrieve a more realistic temporal gravity signal along the coastline. Our point of departure is that the surface mass loading associated with standard RBF is smooth but disregards physical consistency between continental mass and passive ocean response. In this contribution, based on earlier work by Clarke et al.(2007), a physically self-consistent MRBF representation is constructed from standard RBFs, with the help of the sea level equation: for a given standard RBF basis, the corresponding MRBF basis is first obtained by keeping the surface load over the continent unchanged, but imposing global mass conservation and equilibrium response of the oceans. Then, the updated set of MRBFs as well as standard RBFs are individually employed as the basis function to determine the temporal gravity field from GRACE L1b data. In this way, in the MRBF GRACE solution, the passive (e.g. ice melting and land hydrology response) sea level is automatically

Hanford Site Composite Analysis Technical Approach Description: Groundwater Pathway Dose Calculation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgans, D. L.; Lindberg, S. L.

The purpose of this technical approach document (TAD) is to document the assumptions, equations, and methods used to perform the groundwater pathway radiological dose calculations for the revised Hanford Site Composite Analysis (CA). DOE M 435.1-1, states, “The composite analysis results shall be used for planning, radiation protection activities, and future use commitments to minimize the likelihood that current low-level waste disposal activities will result in the need for future corrective or remedial actions to adequately protect the public and the environment.”

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

ERIC Educational Resources Information Center

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

Percutaneous endoscopic lumbar discectomy via contralateral approach: a technical case report.

PubMed

Kim, Jin-Sung; Choi, Gun; Lee, Sang-Ho

2011-08-01

Technical case report. The authors report a new percutaneous endoscopic lumbar discectomy (PELD) technique for the treatment of lumbar disc herniation via a contralateral approach. When there are highly down-migrated lumbar disc herniation along just medial to pedicle and narrow ipsilateral intervertebral foramen, the conventional PELD is not easily accessible via ipsilateral transforaminal route. Five patients manifested gluteal and leg pain because of a soft disc herniation at the L4-L5 level. Transforaminal PELD via a contralateral approach was performed to remove the herniated fragment, achieving complete decompression of the nerve root. The symptom was relieved and the patient was discharged the next day. When a conventional transforaminal PELD is difficult because of some anatomical reasons, PELD via a contralateral route could be a good alternative option in selected cases.

Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.

This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I&C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I&C system upgrades of present-day nuclear power plants, as well as I&C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current,more » analog-based I&C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in 1998, and

Using Media as the Basis for a Social Issues Approach to Promoting Moral Literacy in University Teaching

ERIC Educational Resources Information Center

Normore, Anthony H.; Doscher, Stephanie Paul

2007-01-01

Purpose: The purpose of this research is to explore the use of media as the basis for a social issues approach to promoting moral literacy and effective teaching in educational leadership programs. Design/methodology/approach: Through a review of relevant literature, mass media sources, and observations, the authors use Starratt's framework of…

Technical and Sociological Approaches for Curriculum Innovation on Clothing Education Department

NASA Astrophysics Data System (ADS)

Tristantie, N.

2018-02-01

Education in the context of social and technical development is defined as the main factor in the learning process which is implied into curriculum. It needs to be anticipated responsively how the goals of Clothing Education Department should be achieved. The sociological and technological through curriculum innovation at Clothing Education Department aims to gain good profile of the professional graduates in the future. By using the literature study, it is found out that sociological development and technological approach are the main foundation for sustainability of Clothing Education Department.

Office of Exploration: Exploration studies technical report. Volume 2: Studies approach and results

NASA Technical Reports Server (NTRS)

Roberts, Barney B.; Bland, Dan

1988-01-01

The NASA Office of Exploration has been tasked with defining and recommending alternatives for an early 1990's national decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report describes the process that has been developed in a case study approach. The four case studies that were developed in FY88 include: (1) human expedition to Phobos; (2) human expeditions to Mars; (3) lunar observatory; and (4) lunar outpost to early Mars evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work. Volume 2 describes the case study process, the technical results of each of the case studies, and opportunities for additional study. Included in the discussion of each case study is a description of the mission key features and profile. Mission definition and manifesting are detailed, followed by a description of the mission architecture and infrastructure. Systems concepts for the required orbital nodes, transportation systems, and planetary surface systems are discussed. Prerequisite implementation plans resulting from the synthesized case studies are described and in-depth assessments are presented.

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Roberts, Billy J

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solarmore » photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.« less

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

A unified approach to validation, reliability, and education study design for surgical technical skills training.

PubMed

Sweet, Robert M; Hananel, David; Lawrenz, Frances

2010-02-01

To present modern educational psychology theory and apply these concepts to validity and reliability of surgical skills training and assessment. In a series of cross-disciplinary meetings, we applied a unified approach of behavioral science principles and theory to medical technical skills education given the recent advances in the theories in the field of behavioral psychology and statistics. While validation of the individual simulation tools is important, it is only one piece of a multimodal curriculum that in and of itself deserves examination and study. We propose concurrent validation throughout the design of simulation-based curriculum rather than once it is complete. We embrace the concept that validity and curriculum development are interdependent, ongoing processes that are never truly complete. Individual predictive, construct, content, and face validity aspects should not be considered separately but as interdependent and complementary toward an end application. Such an approach could help guide our acceptance and appropriate application of these exciting new training and assessment tools for technical skills training in medicine.

Technical Subjects in Secondary Schools

ERIC Educational Resources Information Center

Howard, A. E.

2008-01-01

Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

Intradural Procedural Time to Assess Technical Difficulty of Superciliary Keyhole and Pterional Approaches for Unruptured Middle Cerebral Artery Aneurysms

PubMed Central

Choi, Yeon-Ju; Son, Wonsoo; Park, Ki-Su

2016-01-01

Objective This study used the intradural procedural time to assess the overall technical difficulty involved in surgically clipping an unruptured middle cerebral artery (MCA) aneurysm via a pterional or superciliary approach. The clinical and radiological variables affecting the intradural procedural time were investigated, and the intradural procedural time compared between a superciliary keyhole approach and a pterional approach. Methods During a 5.5-year period, patients with a single MCA aneurysm were enrolled in this retrospective study. The selection criteria for a superciliary keyhole approach included : 1) maximum diameter of the unruptured MCA aneurysm <15 mm, 2) neck diameter of the MCA aneurysm <10 mm, and 3) aneurysm location involving the sphenoidal or horizontal segment of MCA (M1) segment and MCA bifurcation, excluding aneurysms distal to the MCA genu. Meanwhile, the control comparison group included patients with the same selection criteria as for a superciliary approach, yet who preferred a pterional approach to avoid a postoperative facial wound or due to preoperative skin trouble in the supraorbital area. To determine the variables affecting the intradural procedural time, a multiple regression analysis was performed using such data as the patient age and gender, maximum aneurysm diameter, aneurysm neck diameter, and length of the pre-aneurysm M1 segment. In addition, the intradural procedural times were compared between the superciliary and pterional patient groups, along with the other variables. Results A total of 160 patients underwent a superciliary (n=124) or pterional (n=36) approach for an unruptured MCA aneurysm. In the multiple regression analysis, an increase in the diameter of the aneurysm neck (p<0.001) was identified as a statistically significant factor increasing the intradural procedural time. A Pearson correlation analysis also showed a positive correlation (r=0.340) between the neck diameter and the intradural procedural time

Technical and scale efficiency in public and private Irish nursing homes - a bootstrap DEA approach.

PubMed

Ni Luasa, Shiovan; Dineen, Declan; Zieba, Marta

2016-10-27

This article provides methodological and empirical insights into the estimation of technical efficiency in the nursing home sector. Focusing on long-stay care and using primary data, we examine technical and scale efficiency in 39 public and 73 private Irish nursing homes by applying an input-oriented data envelopment analysis (DEA). We employ robust bootstrap methods to validate our nonparametric DEA scores and to integrate the effects of potential determinants in estimating the efficiencies. Both the homogenous and two-stage double bootstrap procedures are used to obtain confidence intervals for the bias-corrected DEA scores. Importantly, the application of the double bootstrap approach affords true DEA technical efficiency scores after adjusting for the effects of ownership, size, case-mix, and other determinants such as location, and quality. Based on our DEA results for variable returns to scale technology, the average technical efficiency score is 62 %, and the mean scale efficiency is 88 %, with nearly all units operating on the increasing returns to scale part of the production frontier. Moreover, based on the double bootstrap results, Irish nursing homes are less technically efficient, and more scale efficient than the conventional DEA estimates suggest. Regarding the efficiency determinants, in terms of ownership, we find that private facilities are less efficient than the public units. Furthermore, the size of the nursing home has a positive effect, and this reinforces our finding that Irish homes produce at increasing returns to scale. Also, notably, we find that a tendency towards quality improvements can lead to poorer technical efficiency performance.

A Socio-Technical Approach to Preventing, Mitigating, and Recovering from Ransomware Attacks.

PubMed

Sittig, Dean F; Singh, Hardeep

2016-01-01

Recently there have been several high-profile ransomware attacks involving hospitals around the world. Ransomware is intended to damage or disable a user's computer unless the user makes a payment. Once the attack has been launched, users have three options: 1) try to restore their data from backup; 2) pay the ransom; or 3) lose their data. In this manuscript, we discuss a socio-technical approach to address ransomware and outline four overarching steps that organizations can undertake to secure an electronic health record (EHR) system and the underlying computing infrastructure. First, health IT professionals need to ensure adequate system protection by correctly installing and configuring computers and networks that connect them. Next, the health care organizations need to ensure more reliable system defense by implementing user-focused strategies, including simulation and training on correct and complete use of computers and network applications. Concomitantly, the organization needs to monitor computer and application use continuously in an effort to detect suspicious activities and identify and address security problems before they cause harm. Finally, organizations need to respond adequately to and recover quickly from ransomware attacks and take actions to prevent them in future. We also elaborate on recommendations from other authoritative sources, including the National Institute of Standards and Technology (NIST). Similar to approaches to address other complex socio-technical health IT challenges, the responsibility of preventing, mitigating, and recovering from these attacks is shared between health IT professionals and end-users.

A Socio-Technical Approach to Preventing, Mitigating, and Recovering from Ransomware Attacks

PubMed Central

Singh, Hardeep

2016-01-01

Summary Recently there have been several high-profile ransomware attacks involving hospitals around the world. Ransomware is intended to damage or disable a user’s computer unless the user makes a payment. Once the attack has been launched, users have three options: 1) try to restore their data from backup; 2) pay the ransom; or 3) lose their data. In this manuscript, we discuss a socio-technical approach to address ransomware and outline four overarching steps that organizations can undertake to secure an electronic health record (EHR) system and the underlying computing infrastructure. First, health IT professionals need to ensure adequate system protection by correctly installing and configuring computers and networks that connect them. Next, the health care organizations need to ensure more reliable system defense by implementing user-focused strategies, including simulation and training on correct and complete use of computers and network applications. Concomitantly, the organization needs to monitor computer and application use continuously in an effort to detect suspicious activities and identify and address security problems before they cause harm. Finally, organizations need to respond adequately to and recover quickly from ransomware attacks and take actions to prevent them in future. We also elaborate on recommendations from other authoritative sources, including the National Institute of Standards and Technology (NIST). Similar to approaches to address other complex socio-technical health IT challenges, the responsibility of preventing, mitigating, and recovering from these attacks is shared between health IT professionals and end-users. PMID:27437066

Understanding a technical language: A schema-based approach

NASA Technical Reports Server (NTRS)

Falzon, P.

1984-01-01

Workers in many job categories tend to develop technical languages, which are restricted subjects of natural language. A better knowledge of these retrictions provides guidelines for the design of the restricted languages of interactive systems. Accordingly, a technical language used by air-traffic controllers in their communications with pilots was studied. A method of analysis is presented that allows the schemata underlying each category of messages to be identified. This schematic knowledge was implemented in programs, which assume that the goal-oriented aspect of technical languages (and particularly the restricted domain of discourse) limits the processes and the data necessary in order to understand the messages (monosemy, limited vocabulary, evocation of the schemata by some command words, absence of syntax). The programs can interpret, and translate into sequences of action, the messages emitted by the controllers.

Moving International Technical Communication Forward: A World Englishes Approach

ERIC Educational Resources Information Center

Bokor, Michael Jarvis Kwadzo

2011-01-01

This article explores how the English language contributes to cross-boundary communication failure and establishes that there is an "English language problem" that has not been adequately addressed in preparing United States native English-speaking students for international technical communication tasks. For example, U.S. technical communication…

Identifying Technical Vocabulary

ERIC Educational Resources Information Center

Chung, Teresa Mihwa; Nation, Paul

2004-01-01

This study compared four different approaches to identifying technical words in an anatomy text. The first approach used a four step rating scale, and was used as the comparison for evaluating the other three approaches. It had a high degree of reliability. The least successful approach was that using clues provided by the writer such as labels in…

Third-Order Incremental Dual-Basis Set Zero-Buffer Approach: An Accurate and Efficient Way To Obtain CCSD and CCSD(T) Energies.

PubMed

Zhang, Jun; Dolg, Michael

2013-07-09

An efficient way to obtain accurate CCSD and CCSD(T) energies for large systems, i.e., the third-order incremental dual-basis set zero-buffer approach (inc3-db-B0), has been developed and tested. This approach combines the powerful incremental scheme with the dual-basis set method, and along with the new proposed K-means clustering (KM) method and zero-buffer (B0) approximation, can obtain very accurate absolute and relative energies efficiently. We tested the approach for 10 systems of different chemical nature, i.e., intermolecular interactions including hydrogen bonding, dispersion interaction, and halogen bonding; an intramolecular rearrangement reaction; aliphatic and conjugated hydrocarbon chains; three compact covalent molecules; and a water cluster. The results show that the errors for relative energies are <1.94 kJ/mol (or 0.46 kcal/mol), for absolute energies of <0.0026 hartree. By parallelization, our approach can be applied to molecules of more than 30 atoms and more than 100 correlated electrons with high-quality basis set such as cc-pVDZ or cc-pVTZ, saving computational cost by a factor of more than 10-20, compared to traditional implementation. The physical reasons of the success of the inc3-db-B0 approach are also analyzed.

Approaching the theoretical limit in periodic local MP2 calculations with atomic-orbital basis sets: the case of LiH.

PubMed

Usvyat, Denis; Civalleri, Bartolomeo; Maschio, Lorenzo; Dovesi, Roberto; Pisani, Cesare; Schütz, Martin

2011-06-07

The atomic orbital basis set limit is approached in periodic correlated calculations for solid LiH. The valence correlation energy is evaluated at the level of the local periodic second order Møller-Plesset perturbation theory (MP2), using basis sets of progressively increasing size, and also employing "bond"-centered basis functions in addition to the standard atom-centered ones. Extended basis sets, which contain linear dependencies, are processed only at the MP2 stage via a dual basis set scheme. The local approximation (domain) error has been consistently eliminated by expanding the orbital excitation domains. As a final result, it is demonstrated that the complete basis set limit can be reached for both HF and local MP2 periodic calculations, and a general scheme is outlined for the definition of high-quality atomic-orbital basis sets for solids. © 2011 American Institute of Physics

Chinese Scientific and Technical Information Institutions: Development and Perspective

ERIC Educational Resources Information Center

Yanning, Zheng

2011-01-01

The collection, storage, processing, and dissemination of scientific and technical information make an important basis for economic and social development as well as for scientific development. A nation has to develop the right mechanisms and modalities to collect, store, process, and disseminate scientific and technical information tailored to…

Empirical projection-based basis-component decomposition method

NASA Astrophysics Data System (ADS)

Brendel, Bernhard; Roessl, Ewald; Schlomka, Jens-Peter; Proksa, Roland

2009-02-01

Advances in the development of semiconductor based, photon-counting x-ray detectors stimulate research in the domain of energy-resolving pre-clinical and clinical computed tomography (CT). For counting detectors acquiring x-ray attenuation in at least three different energy windows, an extended basis component decomposition can be performed in which in addition to the conventional approach of Alvarez and Macovski a third basis component is introduced, e.g., a gadolinium based CT contrast material. After the decomposition of the measured projection data into the basis component projections, conventional filtered-backprojection reconstruction is performed to obtain the basis-component images. In recent work, this basis component decomposition was obtained by maximizing the likelihood-function of the measurements. This procedure is time consuming and often unstable for excessively noisy data or low intrinsic energy resolution of the detector. Therefore, alternative procedures are of interest. Here, we introduce a generalization of the idea of empirical dual-energy processing published by Stenner et al. to multi-energy, photon-counting CT raw data. Instead of working in the image-domain, we use prior spectral knowledge about the acquisition system (tube spectra, bin sensitivities) to parameterize the line-integrals of the basis component decomposition directly in the projection domain. We compare this empirical approach with the maximum-likelihood (ML) approach considering image noise and image bias (artifacts) and see that only moderate noise increase is to be expected for small bias in the empirical approach. Given the drastic reduction of pre-processing time, the empirical approach is considered a viable alternative to the ML approach.

The basis function approach for modeling autocorrelation in ecological data

USGS Publications Warehouse

Hefley, Trevor J.; Broms, Kristin M.; Brost, Brian M.; Buderman, Frances E.; Kay, Shannon L.; Scharf, Henry; Tipton, John; Williams, Perry J.; Hooten, Mevin B.

2017-01-01

Analyzing ecological data often requires modeling the autocorrelation created by spatial and temporal processes. Many seemingly disparate statistical methods used to account for autocorrelation can be expressed as regression models that include basis functions. Basis functions also enable ecologists to modify a wide range of existing ecological models in order to account for autocorrelation, which can improve inference and predictive accuracy. Furthermore, understanding the properties of basis functions is essential for evaluating the fit of spatial or time-series models, detecting a hidden form of collinearity, and analyzing large data sets. We present important concepts and properties related to basis functions and illustrate several tools and techniques ecologists can use when modeling autocorrelation in ecological data.

Authorization basis requirements comparison report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brantley, W.M.

The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documentsmore » that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.« less

The basis function approach for modeling autocorrelation in ecological data.

PubMed

Hefley, Trevor J; Broms, Kristin M; Brost, Brian M; Buderman, Frances E; Kay, Shannon L; Scharf, Henry R; Tipton, John R; Williams, Perry J; Hooten, Mevin B

2017-03-01

Analyzing ecological data often requires modeling the autocorrelation created by spatial and temporal processes. Many seemingly disparate statistical methods used to account for autocorrelation can be expressed as regression models that include basis functions. Basis functions also enable ecologists to modify a wide range of existing ecological models in order to account for autocorrelation, which can improve inference and predictive accuracy. Furthermore, understanding the properties of basis functions is essential for evaluating the fit of spatial or time-series models, detecting a hidden form of collinearity, and analyzing large data sets. We present important concepts and properties related to basis functions and illustrate several tools and techniques ecologists can use when modeling autocorrelation in ecological data. © 2016 by the Ecological Society of America.

Development of a structured approach for decomposition of complex systems on a functional basis

NASA Astrophysics Data System (ADS)

Yildirim, Unal; Felician Campean, I.

2014-07-01

The purpose of this paper is to present the System State Flow Diagram (SSFD) as a structured and coherent methodology to decompose a complex system on a solution- independent functional basis. The paper starts by reviewing common function modelling frameworks in literature and discusses practical requirements of the SSFD in the context of the current literature and current approaches in industry. The proposed methodology is illustrated through the analysis of a case study: design analysis of a generic Bread Toasting System (BTS).

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities

PubMed Central

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-01-01

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today’s technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities.

PubMed

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-07-14

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today's technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

Endolymphatic Thoracic Duct Stent-Graft Reconstruction for Chylothorax: Approach, Technical Success, Safety, and Short-term Outcomes.

PubMed

Srinivasa, Rajiv N; Chick, Jeffrey Forris Beecham; Hage, Anthony N; Gemmete, Joseph J; Murrey, Douglas C; Srinivasa, Ravi N

2018-04-01

To report approach, technical success, safety, and short-term outcomes of thoracic duct stent-graft reconstruction for the treatment of chylothorax. Two patients, 1 (50%) male and 1 (50%) female, with mean age of 38 years (range: 16-59 years) underwent endolymphatic thoracic duct stent-graft reconstruction between September 2016 and July 2017. Patients had radiographic left-sided chylothoraces (n = 2) from idiopathic causes (n = 1) and heart transplantation (n = 1). In both (100%) patients, antegrade lymphatic access was used to opacify the thoracic duct after which retrograde access was used for thoracic duct stent-graft placement. Pelvic lymphangiography technical success, antegrade cisterna chyli cannulation technical success, thoracic duct opacification technical success, retrograde thoracic duct access technical success, thoracic duct stent-graft reconstruction technical success, ethiodized oil volume, contrast volume, estimated blood loss, procedure time, fluoroscopy time, radiation dose, clinical success, complications, deaths, and follow-up were recorded. Pelvic lymphangiography, antegrade cisterna chyli cannulation, thoracic duct opacification, retrograde thoracic duct access, and thoracic duct stent-graft reconstruction were technically successful in both (100%) patients. Mean ethiodized oil volume was 8 mL (range: 5-10 mL). Mean contrast volume was 13 mL (range: 5-20 mL). Mean estimated blood loss was 13 mL (range: 10-15 mL). Mean fluoroscopy time was 50.4 min (range: 31.2-69.7 min). Mean dose area product and reference air kerma were 954.4 μGmy 2 (range: 701-1,208 μGmy 2 ) and 83.5 mGy (range: 59-108 mGy), respectively. Chylothorax resolved in both (100%) patients. There were no minor or major complications directly related to the procedure. Thoracic duct stent-graft reconstruction may be a technically successful and safe alternative to thoracic duct embolization, disruption, and surgical ligation for the treatment of chylothorax

The composing process in technical communication

NASA Technical Reports Server (NTRS)

Masse, R. E.

1981-01-01

The theory and application of the composing process in technical communications is addressed. The composing process of engineers, some implications for composing research for the teaching and research of technical communication, and an interpretation of the processes as creative experience are also discussed. Two areas of technical communications summarized concern: the rhetorical features of technical communications, and the theoretical background for a process-based view, a problem-solving approach to technical writing.

Technical basis for using passive sampling as a biomimetic extraction procedure to assess bioavailability and predict toxicity of petroleum substances.

PubMed

Redman, A D; Butler, J D; Letinski, D J; Di Toro, D M; Leon Paumen, M; Parkerton, T F

2018-05-01

Solid-phase microextraction fibers coated with polydimethylsiloxane (PDMS) provide a convenient passive sampling format to characterize bioavailability of petroleum substances. Hydrocarbons absorb onto PDMS in proportion to both freely dissolved concentrations and partitioning properties of the individual constituents, which parallels the mechanistic basis used to predict aquatic toxicity in the PETROTOX model. When deployed in a non-depletive manner, combining SPME with thermal desorption and quantification using gas chromatography-flame ionization creates a biomimetic extraction (BE) procedure that has the potential to simplify aquatic hazard assessments of petroleum substances since the total moles of all hydrocarbons sorbed to the fiber can be related to toxic thresholds in target lipid of aquatic organisms. The objective of this work is to describe the technical basis for applying BE measurements to predict toxicity of petroleum substances. Critical BE-based PDMS concentrations corresponding to adverse effects were empirically derived from toxicity tests on different petroleum substances with multiple test species. The resulting species sensitivity distribution (SSD) of PDMS effect concentrations was then compared and found consistent with the previously reported target lipid-based SSD. Further, BE data collected on samples of aqueous media dosed with a wide range of petroleum substances were highly correlated to predicted toxic units derived using the PETROTOX model. These findings provide justification for applying BE in environmental hazard and risk evaluations of petroleum substances and related mixtures. Copyright © 2018 Elsevier Ltd. All rights reserved.

Colonialism and Secondary Technical Education in Hong Kong: 1945-1997

ERIC Educational Resources Information Center

Lau, Wai Wah; Kan, Flora

2011-01-01

This study examines the influence of the colonial experience (1945-1997) on the planning of secondary technical education in Hong Kong. Specifically, the origins of secondary technical institutions and their positioning in secondary education are examined. Primary source materials are used as the basis of investigation and analysis, supplemented…

Developments in Technical Education in the British Caribbean, 1940-60.

ERIC Educational Resources Information Center

Pemberton, S. Macpherson

The paper discusses developments in technical education in the British West Indies from 1940-1960 emphasizing the relation between education and economic development. The objective is to analyze the economic basis of progress in technical education. The document is presented in four chapters. Chapter I summarizes historical background prior to…

Laparoscopic liver resection for posterosuperior tumors using caudal approach and postural changes: A new technical approach.

PubMed

Morise, Zenichi

2016-12-21

Laparoscopic liver resection (LLR) for tumors in the posterosuperior liver [segment (S) 7 and deep S6] is a challenging clinical procedure. This area is located in the bottom of the small subphrenic space (rib cage), with the large and heavy right liver on it when the patient is in the supine position. Thus, LLR of this area is technically demanding because of the handling of the right liver which is necessary to obtain a fine surgical view, secure hemostasis and conduct the resection so as to achieve an appropriate surgical margin in the cage. Handling of the right liver may be performed by the hand-assisted approach, robotic liver resection or by using spacers, such as a sterile glove pouch. In addition, the operative field of posterosuperior resection is in the deep bottom area of the subphrenic cage, with the liver S6 obstructing the laparoscopic caudal view of lesions. The use of intercostal ports facilitates the direct lateral approach into the cage and to the target area, with the combination of mobilization of the liver. Postural changes during the LLR procedure have also been reported to facilitate the LLR for this area, such as left lateral positioning for posterior sectionectomy and semi-prone positioning for tumors in the posterosuperior segments. In our hospital, LLR procedures for posterosuperior tumors are performed via the caudal approach with postural changes. The left lateral position is used for posterior sectionectomy and the semi-prone position is used for S7 segmentectomy and partial resections of S7 and deep S6 without combined intercostal ports insertion. Although the movement of instruments is restricted in the caudal approach, compared to the lateral approach, port placement in the para-vertebra area makes the manipulation feasible and stable, with minimum damage to the environment around the liver.

Technical Basis for Assessing Uranium Bioremediation Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

PE Long; SB Yabusaki; PD Meyer

2008-04-01

In situ bioremediation of uranium holds significant promise for effective stabilization of U(VI) from groundwater at reduced cost compared to conventional pump and treat. This promise is unlikely to be realized unless researchers and practitioners successfully predict and demonstrate the long-term effectiveness of uranium bioremediation protocols. Field research to date has focused on both proof of principle and a mechanistic level of understanding. Current practice typically involves an engineering approach using proprietary amendments that focuses mainly on monitoring U(VI) concentration for a limited time period. Given the complexity of uranium biogeochemistry and uranium secondary minerals, and the lack of documentedmore » case studies, a systematic monitoring approach using multiple performance indicators is needed. This document provides an overview of uranium bioremediation, summarizes design considerations, and identifies and prioritizes field performance indicators for the application of uranium bioremediation. The performance indicators provided as part of this document are based on current biogeochemical understanding of uranium and will enable practitioners to monitor the performance of their system and make a strong case to clients, regulators, and the public that the future performance of the system can be assured and changes in performance addressed as needed. The performance indicators established by this document and the information gained by using these indicators do add to the cost of uranium bioremediation. However, they are vital to the long-term success of the application of uranium bioremediation and provide a significant assurance that regulatory goals will be met. The document also emphasizes the need for systematic development of key information from bench scale tests and pilot scales tests prior to full-scale implementation.« less

Effective empirical corrections for basis set superposition error in the def2-SVPD basis: gCP and DFT-C

NASA Astrophysics Data System (ADS)

Witte, Jonathon; Neaton, Jeffrey B.; Head-Gordon, Martin

2017-06-01

With the aim of mitigating the basis set error in density functional theory (DFT) calculations employing local basis sets, we herein develop two empirical corrections for basis set superposition error (BSSE) in the def2-SVPD basis, a basis which—when stripped of BSSE—is capable of providing near-complete-basis DFT results for non-covalent interactions. Specifically, we adapt the existing pairwise geometrical counterpoise (gCP) approach to the def2-SVPD basis, and we develop a beyond-pairwise approach, DFT-C, which we parameterize across a small set of intermolecular interactions. Both gCP and DFT-C are evaluated against the traditional Boys-Bernardi counterpoise correction across a set of 3402 non-covalent binding energies and isomerization energies. We find that the DFT-C method represents a significant improvement over gCP, particularly for non-covalently-interacting molecular clusters. Moreover, DFT-C is transferable among density functionals and can be combined with existing functionals—such as B97M-V—to recover large-basis results at a fraction of the cost.

Perihilar Glissonian Approach for Anatomical Parenchymal Sparing Liver Resections: Technical Aspects: The Taping Game.

PubMed

Figueroa, Rodrigo; Laurenzi, Andrea; Laurent, Alexis; Cherqui, Daniel

2018-03-01

To present technical details for central hepatectomy and right anterior and posterior sectionectomies using perihilar Glissonian approach for anatomical delineation and selective inflow occlusion. Central tumors and those deeply located in the right liver may require extensive resections because of their proximity to major vascular structures. In such cases, anatomical more limited resections such as central hepatectomy or sectionectomies may provide an alternative to extensive surgery by assuring both parenchymal sparing and suitable oncologic resection. We present the global concept for performing a perihilar Glissonian approach and its application to each individual anatomical procedure. This includes detailed descriptions, illustrations, and videos demonstrating the technique. This technique was applied since 1991 for anatomical parenchymal resections including central hepatectomy (resection of segments 4, 5, and 8), right anterior sectionectomy (resection of segments 5 and 8), and right posterior sectionectomy (resection of segments 6 and 7). The feasibility rate of the Glissonian approach was 88%. Perihilar Glissonian approach is a safe and reproducible technique that enables anatomical parenchymal preserving liver resections for selected central and right-sided deeply located tumors.

Crusader solid propellant best technical approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graves, V.; Bader, G.; Dolecki, M.

1995-12-01

The goal of the Solid Propellant Resupply Team is to develop Crusader system concepts capable of automatically handling 155mm projectiles and Modular Artillery Charges (MACs) based on system requirements. The system encompasses all aspects of handling from initial input into a resupply vehicle (RSV) to the final loading into the breech of the self-propelled howitzer (SPH). The team, comprised of persons from military and other government organizations, developed concepts for the overall vehicles as well as their interior handling components. An intermediate review was conducted on those components, and revised concepts were completed in May 1995. A concept evaluation wasmore » conducted on the finalized concepts, from both a systems level and a component level. The team`s Best Technical Approach (BTA) concept was selected from that evaluation. Both vehicles in the BTA have a front-engine configuration with the crew situated behind the engine-low in the vehicles. The SPH concept utilizes an automated reload port at the rear of the vehicle, centered high. The RSV transfer boom will dock with this port to allow automated ammunition transfer. The SPH rearm system utilizes fully redundant dual loaders. Active magazines are used for both projectiles and MACs. The SPH also uses a nonconventional tilted ring turret configuration to maximize the available interior volume in the vehicle. This configuration can be rearmed at any elevation angle but only at 0{degree} azimuth. The RSV configuration is similar to that of the SPH. The RSV utilizes passive storage racks with a pick-and-place manipulator for handling the projectiles and active magazines for the MACs. A telescoping transfer boom extends out the front of the vehicle over the crew and engine.« less

Research in Technical Colleges

ERIC Educational Resources Information Center

MacLennan, A.

2008-01-01

Purpose: The purpose of this paper is to list and demonstrate areas in which research needs to be carried out, or questions answered, in order to raise the quality of technical education. Design/methodology/approach: The area of technical education expanded very rapidly in the late 1950s, and there was little comprehensive knowledge regarding the…

47 CFR 51.307 - Duty to provide access on an unbundled basis to network elements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... network elements. 51.307 Section 51.307 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.307 Duty to provide access on an unbundled basis to network elements. (a) An incumbent LEC... service, nondiscriminatory access to network elements on an unbundled basis at any technically feasible...

47 CFR 51.307 - Duty to provide access on an unbundled basis to network elements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... network elements. 51.307 Section 51.307 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Carriers § 51.307 Duty to provide access on an unbundled basis to network elements. (a) An incumbent LEC... service, nondiscriminatory access to network elements on an unbundled basis at any technically feasible...

A Practical Approach to Early Technical Education

ERIC Educational Resources Information Center

Chijioke, M. O.

1973-01-01

A minimum of technological awareness is essential to Black Africa in its efforts to modernize itself. The young grow up deprived of an environment where they are made to feel at home with gadgets and machines. Elementary technical training and orderly exposure to mathematics are essential to child's education. (EB)

Technical indicators of economic performance in dairy sheep farming.

PubMed

Theodoridis, A; Ragkos, A; Roustemis, D; Arsenos, G; Abas, Z; Sinapis, E

2014-01-01

In this study, the level of technical efficiency of 58 sheep farms rearing the Chios breed in Greece was measured through the application of the stochastic frontier analysis method. A Translog stochastic frontier production function was estimated using farm accounting data of Chios sheep farms and the impact of various socio-demographic and biophysical factors on the estimated efficiency of the farms was evaluated. The farms were classified into efficiency groups on the basis of the estimated level of efficiency and a technical and economic descriptive analysis was applied in order to illustrate an indicative picture of their structure and productivity. The results of the stochastic frontier model indicate that there are substantial production inefficiencies among the Chios sheep farms and that these farms could increase their production through the improvement of technical efficiency, whereas the results of the inefficiency effects model reveal that the farm-specific explanatory factors can partly explain the observed efficiency differentials. The measurement of technical inefficiency and the detection of its determinants can be used to form the basis of policy recommendations that could contribute to the development of the sector.

Getting Personal: Individuality, Innovation, and Technical Communication.

ERIC Educational Resources Information Center

Steiner, Carol J.

1999-01-01

Suggests that effective communication between technical and nontechnical people is difficult because technical communication lacks a personal dimension: technical people give up their identity to be considered competent. Argues that a different approach to communication education for scientists, engineers, and technologists is required to equip…

Scanning tunneling microscopy image simulation of the rutile (110) TiO2 surface with hybrid functionals and the localized basis set approach

NASA Astrophysics Data System (ADS)

Di Valentin, Cristiana

2007-10-01

In this work we present a simplified procedure to use hybrid functionals and localized atomic basis sets to simulate scanning tunneling microscopy (STM) images of stoichiometric, reduced and hydroxylated rutile (110) TiO2 surface. For the two defective systems it is necessary to introduce some exact Hartree-Fock exchange in the exchange functional in order to correctly describe the details of the electronic structure. Results are compared to the standard density functional theory and planewave basis set approach. Both methods have advantages and drawbacks that are analyzed in detail. In particular, for the localized basis set approach, it is necessary to introduce a number of Gaussian function in the vacuum region above the surface in order to correctly describe the exponential decay of the integrated local density of states from the surface. In the planewave periodic approach, a thick vacuum region is required to achieve correct results. Simulated STM images are obtained for both the reduced and hydroxylated surface which nicely compare with experimental findings. A direct comparison of the two defects as displayed in the simulated STM images indicates that the OH groups should appear brighter than oxygen vacancies in perfect agreement with the experimental STM data.

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

PubMed Central

Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

2015-01-01

This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key points The impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level. The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged. PMID:25729299

Principles and Procedures in Technical Assistance: An Approach to Educational Change

ERIC Educational Resources Information Center

Lillie, David L.; Black, Talbot

1976-01-01

The Technical Assistance Development System (TADS) has developed through the years a system for technical assistance and has identified some important principles that should be followed in the operation of organizational support systems. (Author/ER)

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

PubMed

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

The Use and Value of Defense Technical Information Center Products and Services.

ERIC Educational Resources Information Center

Roderer, Nancy K.; And Others

This study describes the use and value of the major information products and services provided by the Defense Technical Information Center (DTIC). These products and services include technical report distribution on an on-demand basis and through the Automatic Document Distribution (ADD) program; secondary information dissemination through online…

Method of identification of patent trends based on descriptions of technical functions

NASA Astrophysics Data System (ADS)

Korobkin, D. M.; Fomenkov, S. A.; Golovanchikov, A. B.

2018-05-01

The use of the global patent space to determine the scientific and technological priorities for the technical systems development (identifying patent trends) allows one to forecast the direction of the technical systems development and, accordingly, select patents of priority technical subjects as a source for updating the technical functions database and physical effects database. The authors propose an original method that uses as trend terms not individual unigrams or n-gram (usually for existing methods and systems), but structured descriptions of technical functions in the form “Subject-Action-Object” (SAO), which in the authors’ opinion are the basis of the invention.

Technical Education and Resource Material.

ERIC Educational Resources Information Center

Mills, Marie T.

New approaches and many technical innovations will be required by the junior college to meet the increasing educational needs of technical occupations. A first is information on which the prospective student can base an intelligent choice of occupation. For this he must have a precise job description to determine whether the career fits his…

Technical Basis for Evaluating Software-Related Common-Cause Failures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muhlheim, Michael David; Wood, Richard

2016-04-01

The instrumentation and control (I&C) system architecture at a nuclear power plant (NPP) incorporates protections against common-cause failures (CCFs) through the use of diversity and defense-in-depth. Even for well-established analog-based I&C system designs, the potential for CCFs of multiple systems (or redundancies within a system) constitutes a credible threat to defeating the defense-in-depth provisions within the I&C system architectures. The integration of digital technologies into the I&C systems provides many advantages compared to the aging analog systems with respect to reliability, maintenance, operability, and cost effectiveness. However, maintaining the diversity and defense-in-depth for both the hardware and software within themore » digital system is challenging. In fact, the introduction of digital technologies may actually increase the potential for CCF vulnerabilities because of the introduction of undetected systematic faults. These systematic faults are defined as a “design fault located in a software component” and at a high level, are predominately the result of (1) errors in the requirement specification, (2) inadequate provisions to account for design limits (e.g., environmental stress), or (3) technical faults incorporated in the internal system (or architectural) design or implementation. Other technology-neutral CCF concerns include hardware design errors, equipment qualification deficiencies, installation or maintenance errors, instrument loop scaling and setpoint mistakes.« less

TECHNICAL APPROACHES TO CHARACTERIZING AND ...

EPA Pesticide Factsheets

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will need to base assessment and cleanup activities on the conditions of the particular sites with which they are dealing. A site assessment strategy should address: the type and extent of contamination, if any, that is present, the types of data needed to adequately assess the site; appropriate sampling and analytical methods to characterize the contamination; acceptable level of uncertainty and cleanup technologies that contain or treat the types of wastes present.This document includes references to state agency roles including the Voluntary Cleanup Program, public involvement and other guidances that may be used. Information

Staff Considerations in Technical Services: The Chameleon Approach.

ERIC Educational Resources Information Center

Foster, Constance L.

1988-01-01

Discusses the need to cope effectively with technological transitions in library technical services and to plan for successful staff development. The areas discussed include changing job skills, financial planning, ergonomics, innovative partnerships, training, and an emphasis on human resources development. (21 references) (Author/CLB)

Environmental Education in Technical and Vocational Education. A Discussion Document for Unesco Training Seminars on the Incorporation of Environmental Education into Technical and Vocational Education. Environmental Education Series 24.

ERIC Educational Resources Information Center

Grabe, Sven

This paper is intended to serve as the basis for discussion of the scope and place of environmental education in technical and vocational education. It is addressed primarily to administrators, curriculum developers, and other active participants in the definition of scope and content of technical and vocational courses. After a brief introduction…

Applying human rights to maternal health: UN Technical Guidance on rights-based approaches.

PubMed

Yamin, Alicia Ely

2013-05-01

In the last few years there have been several critical milestones in acknowledging the centrality of human rights to sustainably addressing the scourge of maternal death and morbidity around the world, including from the United Nations Human Rights Council. In 2012, the Council adopted a resolution welcoming a Technical Guidance on rights-based approaches to maternal mortality and morbidity, and calling for a report on its implementation in 2 years. The present paper provides an overview of the contents and significance of the Guidance. It reviews how the Guidance can assist policymakers in improving women's health and their enjoyment of rights by setting out the implications of adopting a human rights-based approach at each step of the policy cycle, from planning and budgeting, to ensuring implementation, to monitoring and evaluation, to fostering accountability mechanisms. The Guidance should also prove useful to clinicians in understanding rights frameworks as applied to maternal health. Copyright © 2013 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

An approach to developing independent learning and non-technical skills amongst final year mining engineering students

NASA Astrophysics Data System (ADS)

Knobbs, C. G.; Grayson, D. J.

2012-06-01

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called 'soft' skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to 'soft' skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased.

75 FR 54918 - Draft Regulatory Guide, DG-1247, “Design-Basis Hurricane and Hurricane Missiles for Nuclear Power...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... that the staff uses in evaluating specific problems or postulated accidents, and data that the staff... turbine missiles. NUREG/CR 7004 is the technical basis for regulatory guidance on design-basis hurricane... hurricane wind speeds for new nuclear power plants. [[Page 54919

Load identification approach based on basis pursuit denoising algorithm

NASA Astrophysics Data System (ADS)

Ginsberg, D.; Ruby, M.; Fritzen, C. P.

2015-07-01

The information of the external loads is of great interest in many fields of structural analysis, such as structural health monitoring (SHM) systems or assessment of damage after extreme events. However, in most cases it is not possible to measure the external forces directly, so they need to be reconstructed. Load reconstruction refers to the problem of estimating an input to a dynamic system when the system output and the impulse response functions are usually the knowns. Generally, this leads to a so called ill-posed inverse problem, which involves solving an underdetermined linear system of equations. For most practical applications it can be assumed that the applied loads are not arbitrarily distributed in time and space, at least some specific characteristics about the external excitation are known a priori. In this contribution this knowledge was used to develop a more suitable force reconstruction method, which allows identifying the time history and the force location simultaneously by employing significantly fewer sensors compared to other reconstruction approaches. The properties of the external force are used to transform the ill-posed problem into a sparse recovery task. The sparse solution is acquired by solving a minimization problem known as basis pursuit denoising (BPDN). The possibility of reconstructing loads based on noisy structural measurement signals will be demonstrated by considering two frequently occurring loading conditions: harmonic excitation and impact events, separately and combined. First a simulation study of a simple plate structure is carried out and thereafter an experimental investigation of a real beam is performed.

Project DIVIDE Instrument Development. Technical Report # 0810

ERIC Educational Resources Information Center

Ketterlin-Geller, Leanne; Jung, Eunju; Geller, Josh; Yovanoff, Paul

2008-01-01

In this technical report, we describe the development of cognitive diagnostic test items that form the basis of the diagnostic system for Project DIVIDE (Dynamic Instruction Via Individually Designed Environments). The construct underlying the diagnostic test is division of fractions. We include a description of the process we used to identify the…

SWIFT Intensive Technical Assistance Process. Technical Assistance Brief #1

ERIC Educational Resources Information Center

Sailor, Wayne; McCart, Amy; McSheehan, Michael; Mitchiner, Melinda; Quirk, Carol

2014-01-01

The national center on Schoolwide Integrated Framework for Transformation (SWIFT Center) is now approaching the halfway point in its first full year of providing intensive technical assistance (TA) to 68 schools in 20 local educational agencies across five states. The purpose of this brief is to provide a thumbnail sketch of how this TA process…

Approaches to Technological Update of Vocational/Technical Teachers.

ERIC Educational Resources Information Center

Hamilton, James B.; McElroy, Jack

As part of an effort to address the problem of the technological update of vocational and technical teachers, the National Center for Research in Vocational Education conducted a status study to determine the nature and extent of the problem with respect to institutional level and occupational area. A second aspect of the study dealt with…

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 1).

PubMed

Omoumi, Patrick; Becce, Fabio; Racine, Damien; Ott, Julien G; Andreisek, Gustav; Verdun, Francis R

2015-12-01

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been used successfully in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits; to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Dual-Energy CT: Basic Principles, Technical Approaches, and Applications in Musculoskeletal Imaging (Part 2).

PubMed

Omoumi, Patrick; Verdun, Francis R; Guggenberger, Roman; Andreisek, Gustav; Becce, Fabio

2015-12-01

In recent years, technological advances have allowed manufacturers to implement dual-energy computed tomography (DECT) on clinical scanners. With its unique ability to differentiate basis materials by their atomic number, DECT has opened new perspectives in imaging. DECT has been successfully used in musculoskeletal imaging with applications ranging from detection, characterization, and quantification of crystal and iron deposits, to simulation of noncalcium (improving the visualization of bone marrow lesions) or noniodine images. Furthermore, the data acquired with DECT can be postprocessed to generate monoenergetic images of varying kiloelectron volts, providing new methods for image contrast optimization as well as metal artifact reduction. The first part of this article reviews the basic principles and technical aspects of DECT including radiation dose considerations. The second part focuses on applications of DECT to musculoskeletal imaging including gout and other crystal-induced arthropathies, virtual noncalcium images for the study of bone marrow lesions, the study of collagenous structures, applications in computed tomography arthrography, as well as the detection of hemosiderin and metal particles. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Meshless Local Petrov-Galerkin Euler-Bernoulli Beam Problems: A Radial Basis Function Approach

NASA Technical Reports Server (NTRS)

Raju, I. S.; Phillips, D. R.; Krishnamurthy, T.

2003-01-01

A radial basis function implementation of the meshless local Petrov-Galerkin (MLPG) method is presented to study Euler-Bernoulli beam problems. Radial basis functions, rather than generalized moving least squares (GMLS) interpolations, are used to develop the trial functions. This choice yields a computationally simpler method as fewer matrix inversions and multiplications are required than when GMLS interpolations are used. Test functions are chosen as simple weight functions as in the conventional MLPG method. Compactly and noncompactly supported radial basis functions are considered. The non-compactly supported cubic radial basis function is found to perform very well. Results obtained from the radial basis MLPG method are comparable to those obtained using the conventional MLPG method for mixed boundary value problems and problems with discontinuous loading conditions.

Exploration studies technical report, FY1988 status. Volume 1: Technical summary

NASA Technical Reports Server (NTRS)

1988-01-01

The Office of Exploration (OEXP) at NASA Headquarters has been tasked with defining and recommending alternatives for an early 1990's nationaL decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Lyndon B. Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report, produced by the MASE, describes the process that has been developed in a case study approach. The four case studies developed in FY88 include: (1) Human Expedition to Phobos; (2) Human Expedition to Mars; (3) Lunar Observatory; and (4) Lunar Outpost to Early Mars Evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work.

An Approach to Tailoring Major Technical Reviews Based on Project Characteristics and Stakeholder Interests

NASA Technical Reports Server (NTRS)

Richstein, Alan B.; Nolte, Jerome T.; Pfarr, Barbara B.

2004-01-01

There are numerous technical reviews that occur throughout the systems engineering process life cycle. Many are well known by project managers and stakeholders such as developers and end users, an example of much is the critical design review (CDR). This major milestone for a large, complex new project may last two or more days, include an extensive agenda of topics, and entail hundreds of hours of developer time to prepare presentation materials and associated documents. Additionally, the weeks of schedule spent on review preparation is at least partly at the expense of other work. This paper suggests an approach for tailoring technical reviews, based on the project characteristics and the project manager s identification of the key stakeholders and understanding of their most important issues and considerations. With this insight the project manager can communicate to, manage expectations oc and establish formal agreement with the stakeholders as to which reviews, and at what depth, are most appropriate to achieve project success. The authors, coming from diverse organizations and backgrounds, have drawn on their personal experiences and summarized the best practices of their own organizations to create a common framework to provide guidance on the adaptation of design reviews to other system engineers.

The Spin-Foam Approach to Quantum Gravity.

PubMed

Perez, Alejandro

2013-01-01

This article reviews the present status of the spin-foam approach to the quantization of gravity. Special attention is payed to the pedagogical presentation of the recently-introduced new models for four-dimensional quantum gravity. The models are motivated by a suitable implementation of the path integral quantization of the Plebanski formulation of gravity on a simplicial regularization. The article also includes a self-contained treatment of 2+1 gravity. The simple nature of the latter provides the basis and a perspective for the analysis of both conceptual and technical issues that remain open in four dimensions.

Basis set study of classical rotor lattice dynamics.

PubMed

Witkoskie, James B; Wu, Jianlan; Cao, Jianshu

2004-03-22

The reorientational relaxation of molecular systems is important in many phenomenon and applications. In this paper, we explore the reorientational relaxation of a model Brownian rotor lattice system with short range interactions in both the high and low temperature regimes. In this study, we use a basis set expansion to capture collective motions of the system. The single particle basis set is used in the high temperature regime, while the spin wave basis is used in the low temperature regime. The equations of motion derived in this approach are analogous to the generalized Langevin equation, but the equations render flexibility by allowing nonequilibrium initial conditions. This calculation shows that the choice of projection operators in the generalized Langevin equation (GLE) approach corresponds to defining a specific inner-product space, and this inner-product space should be chosen to reveal the important physics of the problem. The basis set approach corresponds to an inner-product and projection operator that maintain the orthogonality of the spherical harmonics and provide a convenient platform for analyzing GLE expansions. The results compare favorably with numerical simulations, and the formalism is easily extended to more complex systems. (c) 2004 American Institute of Physics

Engineering Technical Review Planning Briefing

NASA Technical Reports Server (NTRS)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Case Study on Technical and Vocational Education in Japan. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Iwamoto, Muneharu

In the course of Japan's economic progress, remarkable changes have occurred in the structure of industry and employment. Workers are in extremely short supply in such occupations as mining, manufacturing and construction, services, transportation and communication, sales, and professional and technical. On the basis of recommendations of the…

The Roles of Technical Communication Researchers in Design Scholarship

ERIC Educational Resources Information Center

Sánchez, Fernando

2017-01-01

Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

New Technical Solution for Vertical Shaft Equipping Using Steel Headframe of Multifunction Purpose

NASA Astrophysics Data System (ADS)

Kassikhina, Elena; Pershin, Vladimir; Glazkov, Yurij

2017-11-01

The article reviews a novel approach to the design of steel angle headframe for vertical shafts of coal and ore mines on the basis of rational design solutions. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

Dual- and Multi-Energy CT: Principles, Technical Approaches, and Clinical Applications

PubMed Central

Leng, Shuai; Yu, Lifeng; Fletcher, Joel G.

2015-01-01

In x-ray computed tomography (CT), materials having different elemental compositions can be represented by identical pixel values on a CT image (ie, CT numbers), depending on the mass density of the material. Thus, the differentiation and classification of different tissue types and contrast agents can be extremely challenging. In dual-energy CT, an additional attenuation measurement is obtained with a second x-ray spectrum (ie, a second “energy”), allowing the differentiation of multiple materials. Alternatively, this allows quantification of the mass density of two or three materials in a mixture with known elemental composition. Recent advances in the use of energy-resolving, photon-counting detectors for CT imaging suggest the ability to acquire data in multiple energy bins, which is expected to further improve the signal-to-noise ratio for material-specific imaging. In this review, the underlying motivation and physical principles of dual- or multi-energy CT are reviewed and each of the current technical approaches is described. In addition, current and evolving clinical applications are introduced. © RSNA, 2015 PMID:26302388

Technical Basis of Scaling Relationships for the Pretreatment Engineering Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhn, William L.; Arm, Stuart T.; Huckaby, James L.

Pacific Northwest National Laboratory has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Waste Treatment Plant (RPP-WTP) project to perform research and development activities. The Pretreatment Engineering Platform (PEP) is being designed and constructed as part of a plan to respond to an issue raised by the WTP External Flowsheet Review Team (EFRT) entitled “Undemonstrated Leaching Processes” and numbered M12. The PEP replicates the WTP leaching process using prototypic equipment and control strategies. The approach for scaling PEP performance data to predict WTP performance is critical to the successful resolution of the EFRT issue. This report describesmore » the recommended PEP scaling approach, PEP data interpretation and provides recommendations on test conduct and data requirements.« less

[Flexible ENT endoscopy--video technic].

PubMed

Rasinger, G A; Horak, F

1985-02-01

This study discusses the solutions to the problem of documenting moving processes in the field of otolaryngology. A flexible bronchoscope and video equipment connected to it are presented as a specific solution of the problem, with ample of observations. A technical comparison is used as the basis for a discussion of the pros and cons of the video and film techniques. A successful arrangement of examination facilities illustrates the future of flexible-endoscope techniques in the field of otolaryngology.

Technical requirements for bioassay support services

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hickman, D.P.; Anderson, A.L.

1991-05-01

This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) bioassay program. It includes information and details that can be used as a model in providing technical contents and requirements for bioassay laboratory support, either internally or in solicitations by Geotech to obtain subcontractor laboratory support. It provides a detailed summary and description of the types of bioassay samples to be expected in support of Geotech remedial projects for the US Department of Energy and the bioassay services and analytical requirements necessary to process such samples, including required limits of sensitivity. General responsibilities of the bioassay laboratory are alsomore » addressed, including quality assurance. Peripheral information of importance to the program is included in the appendices of this document. 7 tabs.« less

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

How to Recognize a Quality Technical Education Program.

ERIC Educational Resources Information Center

Doty, Charles R.

Criteria for the evaluation of quality technical educational programs must be identified if follow-up studies are to be effective. Current research shows that problems in the development of such criteria include the tendency to evaluate programs on the basis of organizational structure rather than on the quality of the instructional program…

A socio-technical systems approach to studying interruptions: understanding the interrupter's perspective.

PubMed

Rivera, A Joy

2014-05-01

The purpose of this study was to understand the cognitive processes underlying nurses' decision to interrupt other nurses. The Institute of Medicine (2000) reported that interruptions are likely contributors to medical errors. Unfortunately, the research to date has been quite homogenous, focusing only on the healthcare provider being interrupted, ignoring the true complexities of interruptions. This study took a socio-technical approach being the first to examine interruptions from the viewpoint of the interrupting nurse. Over 15 h of observations and 10 open-ended interviews with expert nurses in a Neuroscience Surgical Intensive Care Unit were conducted. It was found that nurses conduct a quick cost-benefit assessment to determine the interruptibility of other nurses and whether an interruption is value-added vs. non-value added. To complete the assessment, nurses consider several conditional factors related to the interruptee, the interrupter, and the nature of the interruption content, and different potential consequences of the interruption. Published by Elsevier Ltd.

War-gaming application for future space systems acquisition part 1: program and technical baseline war-gaming modeling and simulation approaches

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.

2017-05-01

This paper describes static Bayesian game models with "Pure" and "Mixed" games for the development of an optimum Program and Technical Baseline (PTB) solution for affordable acquisition of future space systems. The paper discusses System Engineering (SE) frameworks and analytical and simulation modeling approaches for developing the optimum PTB solutions from both the government and contractor perspectives.

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures

PubMed Central

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-01-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

PubMed

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-02-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of

Design and utilisation of protocols to characterise dynamic PET uptake of two tracers using basis pursuit.

PubMed

Bell, Christopher; Puttick, Simon; Rose, Stephen; Smith, Jye; Thomas, Paul; Dowson, Nicholas

2017-06-21

Imaging using more than one biological process using PET could be of great utility, but despite previously proposed approaches to dual-tracer imaging, it is seldom performed. The alternative of performing multiple scans is often infeasible for clinical practice or even in research studies. Dual-tracer PET scanning allows for multiple PET radiotracers to be imaged within the same imaging session. In this paper we describe our approach to utilise the basis pursuit method to aid in the design of dual-tracer PET imaging experiments, and later in separation of the signals. The advantage of this approach is that it does not require a compartment model architecture to be specified or even that both signals are distinguishable in all cases. This means the method for separating dual-tracer signals can be used for many feasible and useful combinations of biology or radiotracer, once an appropriate scanning protocol has been decided upon. Following a demonstration in separating the signals from two consecutively injected radionuclides in a controlled experiment, phantom and list-mode mouse experiments demonstrated the ability to test the feasibility of dual-tracer imaging protocols for multiple injection delays. Increases in variances predicted for kinetic macro-parameters V D and K I in brain and tumoral tissue were obtained when separating the synthetically combined data. These experiments confirmed previous work using other approaches that injections delays of 10-20 min ensured increases in variance were kept minimal for the test tracers used. On this basis, an actual dual-tracer experiment using a 20 min delay was performed using these radio tracers, with the kinetic parameters (V D and K I ) extracted for each tracer in agreement with the literature. This study supports previous work that dual-tracer PET imaging can be accomplished provided certain constraints are adhered to. The utilisation of basis pursuit techniques, with its removed need to specify a model

Design and utilisation of protocols to characterise dynamic PET uptake of two tracers using basis pursuit

NASA Astrophysics Data System (ADS)

Bell, Christopher; Puttick, Simon; Rose, Stephen; Smith, Jye; Thomas, Paul; Dowson, Nicholas

2017-06-01

Imaging using more than one biological process using PET could be of great utility, but despite previously proposed approaches to dual-tracer imaging, it is seldom performed. The alternative of performing multiple scans is often infeasible for clinical practice or even in research studies. Dual-tracer PET scanning allows for multiple PET radiotracers to be imaged within the same imaging session. In this paper we describe our approach to utilise the basis pursuit method to aid in the design of dual-tracer PET imaging experiments, and later in separation of the signals. The advantage of this approach is that it does not require a compartment model architecture to be specified or even that both signals are distinguishable in all cases. This means the method for separating dual-tracer signals can be used for many feasible and useful combinations of biology or radiotracer, once an appropriate scanning protocol has been decided upon. Following a demonstration in separating the signals from two consecutively injected radionuclides in a controlled experiment, phantom and list-mode mouse experiments demonstrated the ability to test the feasibility of dual-tracer imaging protocols for multiple injection delays. Increases in variances predicted for kinetic macro-parameters V D and K I in brain and tumoral tissue were obtained when separating the synthetically combined data. These experiments confirmed previous work using other approaches that injections delays of 10-20 min ensured increases in variance were kept minimal for the test tracers used. On this basis, an actual dual-tracer experiment using a 20 min delay was performed using these radio tracers, with the kinetic parameters (V D and K I) extracted for each tracer in agreement with the literature. This study supports previous work that dual-tracer PET imaging can be accomplished provided certain constraints are adhered to. The utilisation of basis pursuit techniques, with its removed need to specify a model

Presentation to U.S.-Canada Bilateral Technical Working Group

EPA Science Inventory

DHS and EPA have collaborated in the development of a draft charter for Technical Working Group (TWG) to serve as the basis of negotiations of bilateral agreements with other countries. The TWG would provide a mechanism for sharing both response and R&D expertise and experience i...

Technical Communication in the 21st Century: Where Are We Going?

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie

1999-01-01

Explores how technical communicators arrive at their attitudes toward the future and the effects of such attitudes toward current practice. Argues for a critically informed, open-minded approach to the future, an approach that encourages an honest self-criticism within the discipline of technical communication. (SC)

Maintaining technical excellence requires a national plan

NASA Technical Reports Server (NTRS)

Davidson, T. F.

1991-01-01

To meet the challenge of technical excellence, AIA established a rocket propulsion committee to develop the National Rocket Propulsion Strategic Plan. Developing such a plan required a broad spectrum of experience and disciplines. The Strategic Plan team needed the participation of industry, government, and academia. The plan provides, if followed, a means for the U.S. to maintain technical excellence and world leadership in rocket propulsion. To implement the National Rocket Propulsion Strategic Plan is to invest in the social, economic, and technological futures of America. The plan lays the basis for upgrading existing propulsion systems and a firm base for future full scale development, production, and operation of rocket propulsion systems for space, defense, and commercial applications.

Basis sets for the calculation of core-electron binding energies

NASA Astrophysics Data System (ADS)

Hanson-Heine, Magnus W. D.; George, Michael W.; Besley, Nicholas A.

2018-05-01

Core-electron binding energies (CEBEs) computed within a Δ self-consistent field approach require large basis sets to achieve convergence with respect to the basis set limit. It is shown that supplementing a basis set with basis functions from the corresponding basis set for the element with the next highest nuclear charge (Z + 1) provides basis sets that give CEBEs close to the basis set limit. This simple procedure provides relatively small basis sets that are well suited for calculations where the description of a core-ionised state is important, such as time-dependent density functional theory calculations of X-ray emission spectroscopy.

The Internet and Technical Services: A Point Break Approach.

ERIC Educational Resources Information Center

McCombs, Gillian M.

1994-01-01

Discusses implications of using the Internet for library technical services. Topics addressed include creative uses of the Internet; three basic applications on the Internet, i.e., electronic mail, remote log-in to another computer, and file transfer; electronic processing of information; electronic access to information; and electronic processing…

Neuromorphic elements and systems as the basis for the physical implementation of artificial intelligence technologies

NASA Astrophysics Data System (ADS)

Demin, V. A.; Emelyanov, A. V.; Lapkin, D. A.; Erokhin, V. V.; Kashkarov, P. K.; Kovalchuk, M. V.

2016-11-01

The instrumental realization of neuromorphic systems may form the basis of a radically new social and economic setup, redistributing roles between humans and complex technical aggregates. The basic elements of any neuromorphic system are neurons and synapses. New memristive elements based on both organic (polymer) and inorganic materials have been formed, and the possibilities of instrumental implementation of very simple neuromorphic systems with different architectures on the basis of these elements have been demonstrated.

Technical aspects of neurostimulation: Focus on equipment, electric field modeling, and stimulation protocols.

PubMed

Klooster, D C W; de Louw, A J A; Aldenkamp, A P; Besseling, R M H; Mestrom, R M C; Carrette, S; Zinger, S; Bergmans, J W M; Mess, W H; Vonck, K; Carrette, E; Breuer, L E M; Bernas, A; Tijhuis, A G; Boon, P

2016-06-01

Neuromodulation is a field of science, medicine, and bioengineering that encompasses implantable and non-implantable technologies for the purpose of improving quality of life and functioning of humans. Brain neuromodulation involves different neurostimulation techniques: transcranial magnetic stimulation (TMS), transcranial direct current stimulation (tDCS), vagus nerve stimulation (VNS), and deep brain stimulation (DBS), which are being used both to study their effects on cognitive brain functions and to treat neuropsychiatric disorders. The mechanisms of action of neurostimulation remain incompletely understood. Insight into the technical basis of neurostimulation might be a first step towards a more profound understanding of these mechanisms, which might lead to improved clinical outcome and therapeutic potential. This review provides an overview of the technical basis of neurostimulation focusing on the equipment, the present understanding of induced electric fields, and the stimulation protocols. The review is written from a technical perspective aimed at supporting the use of neurostimulation in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

[OurPuppet - Caring support with an interactive puppet for informal caregivers : Opportunities and challenges in the social and technical developmental process].

PubMed

Kuhlmann, Andrea; Reuter, Verena; Schramek, Renate; Dimitrov, Todor; Görnig, Matthias; Matip, Eva-Maria; Matthies, Olaf; Naroska, Edwin

2018-01-01

The "OurPuppet" project comprises a sensor-based, interactive puppet that will be developed to communicate with people in need of care during a short period of absence of the informal caregiver. Specially qualified puppet guides will support the use of the new technical development. They instruct people with dementia and caregivers on how to use the puppet and supervise the (informal) care relationship through discussions on a regular basis. The article shows the specific components of users' needs for which the concrete technical development should find answers. It also focuses on the opportunities and challenges for the technical and social developmental process accompanied by these demands. The analysis of the users' needs is based on a participatory approach. Semi-structured focus group interviews were conducted with informal caregivers, nurses and volunteers in order to identify typical situations in home care settings. The interviews were paraphrased and summarized in order to deduce inductive categories (qualitative data analysis), which describe everyday situations that the technical system should address. Such analyses provide information about the needs of potential users and indicate how to design such technical systems. Furthermore, opportunities and challenges of the development process as well as important contextual information were identified.

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Physical basis of radiation protection in space travel

NASA Astrophysics Data System (ADS)

Durante, Marco; Cucinotta, Francis A.

2011-10-01

The health risks of space radiation are arguably the most serious challenge to space exploration, possibly preventing these missions due to safety concerns or increasing their costs to amounts beyond what would be acceptable. Radiation in space is substantially different from Earth: high-energy (E) and charge (Z) particles (HZE) provide the main contribution to the equivalent dose in deep space, whereas γ rays and low-energy α particles are major contributors on Earth. This difference causes a high uncertainty on the estimated radiation health risk (including cancer and noncancer effects), and makes protection extremely difficult. In fact, shielding is very difficult in space: the very high energy of the cosmic rays and the severe mass constraints in spaceflight represent a serious hindrance to effective shielding. Here the physical basis of space radiation protection is described, including the most recent achievements in space radiation transport codes and shielding approaches. Although deterministic and Monte Carlo transport codes can now describe well the interaction of cosmic rays with matter, more accurate double-differential nuclear cross sections are needed to improve the codes. Energy deposition in biological molecules and related effects should also be developed to achieve accurate risk models for long-term exploratory missions. Passive shielding can be effective for solar particle events; however, it is limited for galactic cosmic rays (GCR). Active shielding would have to overcome challenging technical hurdles to protect against GCR. Thus, improved risk assessment and genetic and biomedical approaches are a more likely solution to GCR radiation protection issues.

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

NASA's Lessons Learned and Technical Standards: A Logical Marriage

NASA Technical Reports Server (NTRS)

Gill, Paul; Vaughan, William W.; Garcia, Danny; Weinstein, Richard

2001-01-01

Lessons Learned have been the basis for our accomplishments throughout the ages. They have been passed down from father to son, mother to daughter, teacher to pupil, and older to younger worker. Lessons Learned have also been the basis for NASA's accomplishments for more than forty years. Both government and industry have long recognized the need to systematically document and utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. Lessons Learned have formed the foundation for discoveries, inventions, improvements, textbooks, and Technical Standards.

Contextualizing Secure Information System Design: A Socio-Technical Approach

ERIC Educational Resources Information Center

Charif, Abdul Rahim

2017-01-01

Secure Information Systems (SIS) design paradigms have evolved in generations to adapt to IS security needs. However, modern IS are still vulnerable and are far from secure. The development of an underlying IS cannot be reduced to "technological fixes" neither is the design of SIS. Technical security cannot ensure IS security.…

Real-Space Density Functional Theory on Graphical Processing Units: Computational Approach and Comparison to Gaussian Basis Set Methods.

PubMed

Andrade, Xavier; Aspuru-Guzik, Alán

2013-10-08

We discuss the application of graphical processing units (GPUs) to accelerate real-space density functional theory (DFT) calculations. To make our implementation efficient, we have developed a scheme to expose the data parallelism available in the DFT approach; this is applied to the different procedures required for a real-space DFT calculation. We present results for current-generation GPUs from AMD and Nvidia, which show that our scheme, implemented in the free code Octopus, can reach a sustained performance of up to 90 GFlops for a single GPU, representing a significant speed-up when compared to the CPU version of the code. Moreover, for some systems, our implementation can outperform a GPU Gaussian basis set code, showing that the real-space approach is a competitive alternative for DFT simulations on GPUs.

Measuring and Benchmarking Technical Efficiency of Public Hospitals in Tianjin, China: A Bootstrap-Data Envelopment Analysis Approach.

PubMed

Li, Hao; Dong, Siping

2015-01-01

China has long been stuck in applying traditional data envelopment analysis (DEA) models to measure technical efficiency of public hospitals without bias correction of efficiency scores. In this article, we have introduced the Bootstrap-DEA approach from the international literature to analyze the technical efficiency of public hospitals in Tianjin (China) and tried to improve the application of this method for benchmarking and inter-organizational learning. It is found that the bias corrected efficiency scores of Bootstrap-DEA differ significantly from those of the traditional Banker, Charnes, and Cooper (BCC) model, which means that Chinese researchers need to update their DEA models for more scientific calculation of hospital efficiency scores. Our research has helped shorten the gap between China and the international world in relative efficiency measurement and improvement of hospitals. It is suggested that Bootstrap-DEA be widely applied into afterward research to measure relative efficiency and productivity of Chinese hospitals so as to better serve for efficiency improvement and related decision making. © The Author(s) 2015.

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

Examination of Faculty Expectations of Technical College Administrators as an Important Factor in High Performing Environments

ERIC Educational Resources Information Center

Dupuis, Phyllis A.

2009-01-01

Popular thought supports the notion that faculty expectations of technical college administrators appear to be linked to the success or failure of an institution at accomplishing its mission. These expectations provide the basis for the development of relationships that foster the growth of technical training and thus the growth of a skilled…

A stochastic frontier approach to study the relationship between gastrointestinal nematode infections and technical efficiency of dairy farms.

PubMed

van der Voort, Mariska; Van Meensel, Jef; Lauwers, Ludwig; Vercruysse, Jozef; Van Huylenbroeck, Guido; Charlier, Johannes

2014-01-01

The impact of gastrointestinal (GI) nematode infections in dairy farming has traditionally been assessed using partial productivity indicators. But such approaches ignore the impact of infection on the performance of the whole farm. In this study, efficiency analysis was used to study the association of the GI nematode Ostertagia ostertagi on the technical efficiency of dairy farms. Five years of accountancy data were linked to GI nematode infection data gained from a longitudinal parasitic monitoring campaign. The level of exposure to GI nematodes was based on bulk-tank milk ELISA tests, which measure the antibodies to O. ostertagi and was expressed as an optical density ratio (ODR). Two unbalanced data panels were created for the period 2006 to 2010. The first data panel contained 198 observations from the Belgian Farm Accountancy Data Network (Brussels, Belgium) and the second contained 622 observations from the Boerenbond Flemish farmers' union (Leuven, Belgium) accountancy system (Tiber Farm Accounting System). We used the stochastic frontier analysis approach and defined inefficiency effect models specified with the Cobb-Douglas and transcendental logarithmic (Translog) functional form. To assess the efficiency scores, milk production was considered as the main output variable. Six input variables were used: concentrates, roughage, pasture, number of dairy cows, animal health costs, and labor. The ODR of each individual farm served as an explanatory variable of inefficiency. An increase in the level of exposure to GI nematodes was associated with a decrease in technical efficiency. Exposure to GI nematodes constrains the productivity of pasture, health, and labor but does not cause inefficiency in the use of concentrates, roughage, and dairy cows. Lowering the level of infection in the interquartile range (0.271 ODR) was associated with an average milk production increase of 27, 19, and 9L/cow per year for Farm Accountancy Data Network farms and 63, 49, and

Heavy quarkonium in a holographic basis

DOE PAGES

Li, Yang; Maris, Pieter; Zhao, Xingbo; ...

2016-05-04

Here, we study the heavy quarkonium within the basis light-front quantization approach. We implement the one-gluon exchange interaction and a confining potential inspired by light-front holography. We adopt the holographic light-front wavefunction (LFWF) as our basis function and solve the non-perturbative dynamics by diagonalizing the Hamiltonian matrix. We obtain the mass spectrum for charmonium and bottomonium. With the obtained LFWFs, we also compute the decay constants and the charge form factors for selected eigenstates. The results are compared with the experimental measurements and with other established methods.

Technical and policy approaches to balancing patient privacy and data sharing in clinical and translational research.

PubMed

Malin, Bradley; Karp, David; Scheuermann, Richard H

2010-01-01

Clinical researchers need to share data to support scientific validation and information reuse and to comply with a host of regulations and directives from funders. Various organizations are constructing informatics resources in the form of centralized databases to ensure reuse of data derived from sponsored research. The widespread use of such open databases is contingent on the protection of patient privacy. We review privacy-related problems associated with data sharing for clinical research from technical and policy perspectives. We investigate existing policies for secondary data sharing and privacy requirements in the context of data derived from research and clinical settings. In particular, we focus on policies specified by the US National Institutes of Health and the Health Insurance Portability and Accountability Act and touch on how these policies are related to current and future use of data stored in public database archives. We address aspects of data privacy and identifiability from a technical, although approachable, perspective and summarize how biomedical databanks can be exploited and seemingly anonymous records can be reidentified using various resources without hacking into secure computer systems. We highlight which clinical and translational data features, specified in emerging research models, are potentially vulnerable or exploitable. In the process, we recount a recent privacy-related concern associated with the publication of aggregate statistics from pooled genome-wide association studies that have had a significant impact on the data sharing policies of National Institutes of Health-sponsored databanks. Based on our analysis and observations we provide a list of recommendations that cover various technical, legal, and policy mechanisms that open clinical databases can adopt to strengthen data privacy protection as they move toward wider deployment and adoption.

Design mentoring tool : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

Interdisciplinary Learning as a Basis for Formation of Intercultural Communicative Competence

ERIC Educational Resources Information Center

Redchenko, Nadezhda N.

2016-01-01

An interdisciplinary approach provides many benefits that warrant the need for its use at technical universities teaching foreign language as an academic discipline. This article reviews recent Russian researches focused on interdisciplinary integration, summarizes advantages and proves overall high efficacy of the interdisciplinary approach to…

Lessons Learned and Technical Standards: A Logical Marriage

NASA Technical Reports Server (NTRS)

Gill, Paul; Vaughan, William W.; Garcia, Danny; Gill, Maninderpal S. (Technical Monitor)

2001-01-01

A comprehensive database of lessons learned that corresponds with relevant technical standards would be a boon to technical personnel and standards developers. The authors discuss the emergence of one such database within NASA, and show how and why the incorporation of lessons learned into technical standards databases can be an indispensable tool for government and industry. Passed down from parent to child, teacher to pupil, and from senior to junior employees, lessons learned have been the basis for our accomplishments throughout the ages. Government and industry, too, have long recognized the need to systematically document And utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. The use of lessons learned is a principle component of any organizational culture committed to continuous improvement. They have formed the foundation for discoveries, inventions, improvements, textbooks, and technical standards. Technical standards are a very logical way to communicate these lessons. Using the time-honored tradition of passing on lessons learned while utilizing the newest in information technology, the National Aeronautics and Space Administration (NASA) has launched an intensive effort to link lessons learned with specific technical standards through various Internet databases. This article will discuss the importance of lessons learned to engineers, the difficulty in finding relevant lessons learned while engaged in an engineering project, and the new NASA project that can help alleviate this difficulty. The article will conclude with recommendations for more expanded cross-sectoral uses of lessons learned with reference to technical standards.

Studying Quality beyond Technical Rationality: Political and Symbolic Perspectives

ERIC Educational Resources Information Center

Blanco Ramírez, Gerardo

2013-01-01

The underlying paradigms that influence research on quality have remained alarmingly under-researched; this article analyses the constraints that a technical-rational approach for the study of quality in higher education imposes. Technical rationality has been the dominant paradigm that shapes research on quality in higher education.…

Technical Training: A Systematic Approach.

ERIC Educational Resources Information Center

Gammuto, John J.

1980-01-01

To employ scarce personnel and money to best advantage, company management must diagnose critical training needs and assign them priorities. A systems approach is recommended, which gives focus to training design while accommodating most organization training goals. Included are suggestions for system design, facility management, and cost…

Defending the four principles approach as a good basis for good medical practice and therefore for good medical ethics.

PubMed

Gillon, Raanan

2015-01-01

This paper argues that the four prima facie principles-beneficence, non-maleficence, respect for autonomy and justice-afford a good and widely acceptable basis for 'doing good medical ethics'. It confronts objections that the approach is simplistic, incompatible with a virtue-based approach to medicine, that it requires respect for autonomy always to have priority when the principles clash at the expense of clinical obligations to benefit patients and global justice. It agrees that the approach does not provide universalisable methods either for resolving such moral dilemmas arising from conflict between the principles or their derivatives, or universalisable methods for resolving disagreements about the scope of these principles-long acknowledged lacunae but arguably to be found, in practice, with all other approaches to medical ethics. The value of the approach, when properly understood, is to provide a universalisable though prima facie set of moral commitments which all doctors can accept, a basic moral language and a basic moral analytic framework. These can underpin an intercultural 'moral mission statement' for the goals and practice of medicine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A Radial Basis Function Approach to Financial Time Series Analysis

DTIC Science & Technology

1993-12-01

including efficient methods for parameter estimation and pruning, a pointwise prediction error estimator, and a methodology for controlling the "data...collection of practical techniques to address these issues for a modeling methodology . Radial Basis Function networks. These techniques in- clude efficient... methodology often then amounts to a careful consideration of the interplay between model complexity and reliability. These will be recurrent themes

Defining a Technical Basis for Comparing and Contrasting Emerging Dynamic Discovery Protocols

DTIC Science & Technology

2001-05-02

UPnP, SLP, Bluetooth , and HAVi • Projected specific UML models for Jini, UPnP, and SLP • Completed a Rapide Model of Jini structure, function, and...narrow application focus but targeting a different application domain. (e.g., HAVi, Salutation Consortium, and Bluetooth Service Discovery) • Sun has...Our General Approach? 1/31/2002 7 Particulars of Our Approach Define a Generic UML Model that Encompasses Jini, UPnP, SLP, HAVi, and Bluetooth

The Management of Technical Services--1980.

ERIC Educational Resources Information Center

Rohdy, Margaret A.

1981-01-01

Examines the literature of administration of library technical services from both a library and a management approach, and describes some of the activities of management sections of various library organizations. There are 27 references. (RAA)

UAV Control on the Basis of 3D Landmark Bearing-Only Observations.

PubMed

Karpenko, Simon; Konovalenko, Ivan; Miller, Alexander; Miller, Boris; Nikolaev, Dmitry

2015-11-27

The article presents an approach to the control of a UAV on the basis of 3D landmark observations. The novelty of the work is the usage of the 3D RANSAC algorithm developed on the basis of the landmarks' position prediction with the aid of a modified Kalman-type filter. Modification of the filter based on the pseudo-measurements approach permits obtaining unbiased UAV position estimation with quadratic error characteristics. Modeling of UAV flight on the basis of the suggested algorithm shows good performance, even under significant external perturbations.

UAV Control on the Basis of 3D Landmark Bearing-Only Observations

PubMed Central

Karpenko, Simon; Konovalenko, Ivan; Miller, Alexander; Miller, Boris; Nikolaev, Dmitry

2015-01-01

The article presents an approach to the control of a UAV on the basis of 3D landmark observations. The novelty of the work is the usage of the 3D RANSAC algorithm developed on the basis of the landmarks’ position prediction with the aid of a modified Kalman-type filter. Modification of the filter based on the pseudo-measurements approach permits obtaining unbiased UAV position estimation with quadratic error characteristics. Modeling of UAV flight on the basis of the suggested algorithm shows good performance, even under significant external perturbations. PMID:26633394

Optimizing structure of complex technical system by heterogeneous vector criterion in interval form

NASA Astrophysics Data System (ADS)

Lysenko, A. V.; Kochegarov, I. I.; Yurkov, N. K.; Grishko, A. K.

2018-05-01

The article examines the methods of development and multi-criteria choice of the preferred structural variant of the complex technical system at the early stages of its life cycle in the absence of sufficient knowledge of parameters and variables for optimizing this structure. The suggested methods takes into consideration the various fuzzy input data connected with the heterogeneous quality criteria of the designed system and the parameters set by their variation range. The suggested approach is based on the complex use of methods of interval analysis, fuzzy sets theory, and the decision-making theory. As a result, the method for normalizing heterogeneous quality criteria has been developed on the basis of establishing preference relations in the interval form. The method of building preferential relations in the interval form on the basis of the vector of heterogeneous quality criteria suggest the use of membership functions instead of the coefficients considering the criteria value. The former show the degree of proximity of the realization of the designed system to the efficient or Pareto optimal variants. The study analyzes the example of choosing the optimal variant for the complex system using heterogeneous quality criteria.

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

Performance Evaluation of Indian Technical Institutions Using PROMETHEE-GAIA Approach

ERIC Educational Resources Information Center

Ranjan, Rajeev; Chakraborty, Shankar

2015-01-01

It has now become an important issue to evaluate the performance of technical institutions to develop better research and enrich the existing teaching processes. The results of such performance appraisal would serve as a reference point for decisions to choose a particular institution, hire manpower, and provide financial support for the…

Developing a Rational Approach to Tobacco Use Treatment in Pulmonary Practice: A Review of the Biological Basis of Nicotine Addiction

PubMed Central

Leone, Frank T.; Evers-Casey, Sarah

2012-01-01

The toll of tobacco use on a pulmonary practice is severe. Physicians, patients, and their families experience frustration, hopelessness and even anger when confronted with a seemingly irrational decision to keep smoking despite morbid lung disease. This paper examines the biological basis of this behavior and seeks to integrate this insight into a rational approach to the problem in practice. Smoking is reexamined within the framework of an irrational compulsion to seek nicotine, despite a rational desire to stop. Control over the compulsion to smoke is established as an important clinical outcome, and the rationale for treating tobacco dependence as a chronic illness is examined. Finally, practical insights into managing ambivalence, including an aggressive pharmacotheapeutic approach based on the neurobiology, are presented. PMID:22707873

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Technical Basis for Physical Fidelity of NRC Control Room Training Simulators for Advanced Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minsk, Brian S.; Branch, Kristi M.; Bates, Edward K.

2009-10-09

The objective of this study is to determine how simulator physical fidelity influences the effectiveness of training the regulatory personnel responsible for examination and oversight of operating personnel and inspection of technical systems at nuclear power reactors. It seeks to contribute to the U.S. Nuclear Regulatory Commission’s (NRC’s) understanding of the physical fidelity requirements of training simulators. The goal of the study is to provide an analytic framework, data, and analyses that inform NRC decisions about the physical fidelity requirements of the simulators it will need to train its staff for assignment at advanced reactors. These staff are expected tomore » come from increasingly diverse educational and experiential backgrounds.« less

Mock Certification Basis for an Unmanned Rotorcraft for Precision Agricultural Spraying

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Maddalon, Jeffrey M.; Neogi, Natasha A.; Verstynen, Harry A.; Buelow, Barry; McCormick, G. Frank

2015-01-01

This technical report presents the results of a case study using a hazard-based approach to develop preliminary design and performance criteria for an unmanned agricultural rotorcraft requiring airworthiness certification. This case study is one of the first in the public domain to examine design and performance criteria for an unmanned aircraft system (UAS) in tandem with its concept of operations. The case study results are intended to support development of airworthiness standards that could form a minimum safety baseline for midsize unmanned rotorcraft performing precision agricultural spraying operations under beyond visual line-of-sight conditions in a rural environment. This study investigates the applicability of current methods, processes, and standards for assuring airworthiness of conventionally piloted (manned) aircraft to assuring the airworthiness of UAS. The study started with the development of a detailed concept of operations for precision agricultural spraying with an unmanned rotorcraft (pp. 5-18). The concept of operations in conjunction with a specimen unmanned rotorcraft were used to develop an operational context and a list of relevant hazards (p. 22). Minimum design and performance requirements necessary to mitigate the hazards provide the foundation of a proposed (or mock) type certification basis. A type certification basis specifies the applicable standards an applicant must show compliance with to receive regulatory approval. A detailed analysis of the current airworthiness regulations for normal-category rotorcraft (14 Code of Federal Regulations, Part 27) was performed. Each Part 27 regulation was evaluated to determine whether it mitigated one of the relevant hazards for the specimen UAS. Those regulations that did were included in the initial core of the type certification basis (pp. 26-31) as written or with some simple modifications. Those regulations that did not mitigate a recognized hazard were excluded from the certification

A study on technical efficiency of a DMU (review of literature)

NASA Astrophysics Data System (ADS)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

Understanding the state of health information in Ireland: A qualitative study using a socio-technical approach.

PubMed

Craig, Sarah; Kodate, Naonori

2018-06-01

The objective of this paper is to add to the broader literature on socio-technical theory and its value and/or relevance to health information in Ireland. The paper focuses on three factors that can impact on health information; those of policy, infrastructure and people (PIP) and examines how Ireland compares with other countries in relation to these factors. Qualitative methods (documentary analysis and semi-structured interviews) were used. Key policy and strategy documents, and original research articles from Australia, Canada, Ireland, the UK and the US were analysed from a comparative perspective. The dimensions of policy, infrastructure and people were then explored through semi-structured interviews with health information experts in Ireland. Their perceptions were compared with and contrasted against the findings from the documentary analysis, and examined thematically. The views of health information experts support the findings of the review of Ireland's development in this area compared with other countries and that Ireland lags behind others in policy and practice terms. The paper concludes that the three dimensions of policy, infrastructure and people do indeed help to frame the understanding of health information in Ireland and that a socio-technical perspective, combined with a comparative approach, can also help both policy makers and practitioners in identifying the scope for improvement in health information. Copyright © 2018 Elsevier B.V. All rights reserved.

Does a Math-Enhanced Curriculum and Instructional Approach Diminish Students' Attainment of Technical Skills? A Year-Long Experimental Study in Agricultural Power and Technology

ERIC Educational Resources Information Center

Young, R. Brent; Edwards, M. Craig; Leising, James G.

2009-01-01

The purpose of this study was to empirically test the posit that students who participated in a contextualized, mathematics-enhanced high school agricultural power and technology (APT) curriculum and aligned instructional approach would not differ significantly (p less than 0.05) in their technical competence from students who participated in the…

Biomimetic bio-inspired biomorph sustainable? An attempt to classify and clarify biology-derived technical developments.

PubMed

Speck, Olga; Speck, David; Horn, Rafael; Gantner, Johannes; Sedlbauer, Klaus Peter

2017-01-24

Over the last few decades, the systematic approach of knowledge transfer from biological concept generators to technical applications has received increasing attention, particularly because marketable bio-derived developments are often described as sustainable. The objective of this paper is to rationalize and refine the discussion about bio-derived developments also with respect to sustainability by taking descriptive, normative and emotional aspects into consideration. In the framework of supervised learning, a dataset of 70 biology-derived and technology-derived developments characterised by 9 different attributes together with their respective values and assigned to one of 17 classes was created. On the basis of the dataset a decision tree was generated which can be used as a straightforward classification tool to identify biology-derived and technology-derived developments. The validation of the applied learning procedure achieved an average accuracy of 90.0%. Additional extraordinary qualities of technical applications are generally discussed by means of selected biology-derived and technology-derived examples with reference to normative (contribution to sustainability) and emotional aspects (aesthetics and symbolic character). In the context of a case study from the building sector, all aspects are critically discussed.

Combination of large and small basis sets in electronic structure calculations on large systems

NASA Astrophysics Data System (ADS)

Røeggen, Inge; Gao, Bin

2018-04-01

Two basis sets—a large and a small one—are associated with each nucleus of the system. Each atom has its own separate one-electron basis comprising the large basis set of the atom in question and the small basis sets for the partner atoms in the complex. The perturbed atoms in molecules and solids model is at core of the approach since it allows for the definition of perturbed atoms in a system. It is argued that this basis set approach should be particularly useful for periodic systems. Test calculations are performed on one-dimensional arrays of H and Li atoms. The ground-state energy per atom in the linear H array is determined versus bond length.

A projection-free method for representing plane-wave DFT results in an atom-centered basis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunnington, Benjamin D.; Schmidt, J. R., E-mail: schmidt@chem.wisc.edu

2015-09-14

Plane wave density functional theory (DFT) is a powerful tool for gaining accurate, atomic level insight into bulk and surface structures. Yet, the delocalized nature of the plane wave basis set hinders the application of many powerful post-computation analysis approaches, many of which rely on localized atom-centered basis sets. Traditionally, this gap has been bridged via projection-based techniques from a plane wave to atom-centered basis. We instead propose an alternative projection-free approach utilizing direct calculation of matrix elements of the converged plane wave DFT Hamiltonian in an atom-centered basis. This projection-free approach yields a number of compelling advantages, including strictmore » orthonormality of the resulting bands without artificial band mixing and access to the Hamiltonian matrix elements, while faithfully preserving the underlying DFT band structure. The resulting atomic orbital representation of the Kohn-Sham wavefunction and Hamiltonian provides a gateway to a wide variety of analysis approaches. We demonstrate the utility of the approach for a diverse set of chemical systems and example analysis approaches.« less

Quantum Dynamics with Short-Time Trajectories and Minimal Adaptive Basis Sets.

PubMed

Saller, Maximilian A C; Habershon, Scott

2017-07-11

Methods for solving the time-dependent Schrödinger equation via basis set expansion of the wave function can generally be categorized as having either static (time-independent) or dynamic (time-dependent) basis functions. We have recently introduced an alternative simulation approach which represents a middle road between these two extremes, employing dynamic (classical-like) trajectories to create a static basis set of Gaussian wavepackets in regions of phase-space relevant to future propagation of the wave function [J. Chem. Theory Comput., 11, 8 (2015)]. Here, we propose and test a modification of our methodology which aims to reduce the size of basis sets generated in our original scheme. In particular, we employ short-time classical trajectories to continuously generate new basis functions for short-time quantum propagation of the wave function; to avoid the continued growth of the basis set describing the time-dependent wave function, we employ Matching Pursuit to periodically minimize the number of basis functions required to accurately describe the wave function. Overall, this approach generates a basis set which is adapted to evolution of the wave function while also being as small as possible. In applications to challenging benchmark problems, namely a 4-dimensional model of photoexcited pyrazine and three different double-well tunnelling problems, we find that our new scheme enables accurate wave function propagation with basis sets which are around an order-of-magnitude smaller than our original trajectory-guided basis set methodology, highlighting the benefits of adaptive strategies for wave function propagation.

A Multiplatform Metabolomic Approach to the Basis of Antimonial Action and Resistance in Leishmania infantum

PubMed Central

Castilho-Martins, Emerson A.; Tavares, Marina F. M.; Barbas, Coral; López-Gonzálvez, Ángeles; Rivas, Luis

2015-01-01

There is a rising resistance against antimony drugs, the gold-standard for treatment until some years ago. That is a serious problem due to the paucity of drugs in current clinical use. In a research to reveal how these drugs affect the parasite during treatment and to unravel the underlying basis for their resistance, we have employed metabolomics to study treatment in Leishmania infantum promastigotes. This was accomplished first through the untargeted analysis of metabolic snapshots of treated and untreated parasites both resistant and responders, utilizing a multiplatform approach to give the widest as possible coverage of the metabolome, and additionally through novel monitoring of the origin of the detected alterations through a 13C traceability experiment. Our data stress a multi-target metabolic alteration with treatment, affecting in particular the cell redox system that is essential to cope with detoxification and biosynthetic processes. Additionally, relevant changes were noted in amino acid metabolism. Our results are in agreement with other authors studying other Leishmania species. PMID:26161866

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

PubMed

Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach

PubMed Central

Qin, Yaochen; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention. PMID:28950027

Development and implementation of a technical and didactical training program for student tutors in the dissection course.

PubMed

Shiozawa, Thomas; Hirt, Bernhard; Celebi, Nora; Baur, Friederike; Weyrich, Peter; Lammerding-Köppel, Maria

2010-12-20

student tutors have a long tradition in gross anatomy instruction. However, the full potential of the tutors is generally not tapped, since little attention is paid to their technical and didactical training. The aim of this paper is to report a systematic approach to the development, didactic reasoning and implementation of a curriculum for training student tutors in gross anatomy. the training program was developed using the six-step approach of Kern's curriculum development model. For needs assessment, the literature research was amended by a survey among the 1st and 2nd year students of the dissection course (n=167) and two independent 90 min focus group interviews with the tutors who supervised these students (n=15). Protocols were transcribed and analyzed by margin coding. The training curriculum was setup on the basis of these data. corresponding to the literature, the students want student tutors with good teaching competence as well as adequate content knowledge and technical competence. Supporting that, the tutors request a training program enhancing their didactic skills as well as their knowledge of content and working using relevant methods. Thus, a combined didactic and professional training program has been developed. Six professional and 11 didactic learning objectives were defined. A 3 weeks training curriculum was implemented, using microteaching and group exercises for didactics and active dissection for technical training. Both parts were interlocked on a contextual and practical level. our focus group analyses revealed that a specific training program for student tutors in the dissection course is necessary. We describe a feasible task-oriented training curriculum combining didactic and professional objectives. 2010. Published by Elsevier GmbH.

Technical Change in the North American Forestry Sector: A Review

Treesearch

Jeffery C. Stier; David N. Bengston

1992-01-01

Economists have examined the impact of technical change on the forest products sector using the historical, index number, and econometric approaches. This paper reviews econometric analyses of the rate and bias of technical change, examining functional form, factors included, and empirical results. Studies are classified as first- second-, or third-generation...

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Teaching Technical Skills through Play.

ERIC Educational Resources Information Center

Gullion, Laurie

The value of light-hearted play in teaching technical recreational sport skills is immense. Children as well as adults can learn more quickly and completely with a games-oriented approach. Often without realizing the hidden goal of excellent skiing or paddling, participants respond to intriguing tasks in a game, immerse themselves in good…

Health-based ingestion exposure guidelines for Vibrio cholerae: Technical basis for water reuse applications.

PubMed

Watson, Annetta P; Armstrong, Anthony Q; White, George H; Thran, Brandolyn H

2018-02-01

U.S. military and allied contingency operations are increasingly occurring in locations with limited, unstable or compromised fresh water supplies. Non-potable graywater reuse is currently under assessment as a viable means to increase mission sustainability while significantly reducing the resources, logistics and attack vulnerabilities posed by transport of fresh water. Development of health-based (non-potable) exposure guidelines for the potential microbial components of graywater would provide a logical and consistent human-health basis for water reuse strategies. Such health-based strategies will support not only improved water security for contingency operations, but also sustainable military operations. Dose-response assessment of Vibrio cholerae based on adult human oral exposure data were coupled with operational water exposure scenario parameters common to numerous military activities, and then used to derive health risk-based water concentrations. The microbial risk assessment approach utilized oral human exposure V. cholerae dose studies in open literature. Selected studies focused on gastrointestinal illness associated with experimental infection by specific V. cholerae serogroups most often associated with epidemics and pandemics (O1 and O139). Nonlinear dose-response model analyses estimated V. cholerae effective doses (EDs) aligned with gastrointestinal illness severity categories characterized by diarrheal purge volume. The EDs and water exposure assumptions were used to derive Risk-Based Water Concentrations (CFU/100mL) for mission-critical illness severity levels over a range of water use activities common to military operations. Human dose-response studies, data and analyses indicate that ingestion exposures at the estimated ED 1 (50CFU) are unlikely to be associated with diarrheal illness while ingestion exposures at the lower limit (200CFU) of the estimated ED 10 are not expected to result in a level of diarrheal illness associated with

Technical and economic assessment of processes for the production of butanol and acetone

NASA Technical Reports Server (NTRS)

1982-01-01

This report represents a preliminary technical and economic evaluation of a process which produces mixed solvents (butaol/acetone/ethanol) via fermentation of sugars derived from renewable biomass resources. The objective is to assess the technology of producing butanol/acetone from biomass, and select a viable process capable of serving as a base case model for technical and economic analysis. It is anticipated that the base case process developed herein can then be used as the basis for subsequent studies concerning biomass conversion processes capable of producing a wide range of chemicals. The general criteria utilized in determining the design basis for the process are profit potential and non-renewable energy displacement potential. The feedstock chosen, aspen wood, was selected from a number of potential renewable biomass resources as the most readily available in the United States and for its relatively large potential for producing reducing sugars.

An Online Approach to Teaching International Outsourcing in Technical Communication Classes

ERIC Educational Resources Information Center

St. Amant, Kirk

2005-01-01

The growth of international online access has given rise to a new production method--international outsourcing--that has important implications for technical communication practices. Successful interactions within international outsourcing require individuals to understand how cultural factors could affect online interactions. Today's technical…

Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

Conceptualising the technical relationship of animal disease surveillance to intervention and mitigation as a basis for economic analysis

PubMed Central

2011-01-01

Background Surveillance and intervention are resource-using activities of strategies to mitigate the unwanted effects of disease. Resources are scarce, and allocating them to disease mitigation instead of other uses necessarily involves the loss of alternative sources of benefit to people. For society to obtain the maximum benefits from using resources, the gains from disease mitigation must be compared to the resource costs, guiding decisions made with the objective of achieving the optimal net outcome. Discussion Economics provides criteria to guide decisions aimed at optimising the net benefits from the use of scarce resources. Assessing the benefits of disease mitigation is no exception. However, the technical complexity of mitigation means that economic evaluation is not straightforward because of the technical relationship of surveillance to intervention. We argue that analysis of the magnitudes and distribution of benefits and costs for any given strategy, and hence the outcome in net terms, requires that mitigation is considered in three conceptually distinct stages. In Stage I, 'sustainment', the mitigation objective is to sustain a free or acceptable status by preventing an increase of a pathogen or eliminating it when it occurs. The role of surveillance is to document that the pathogen remains below a defined threshold, giving early warning of an increase in incidence or other significant changes in risk, and enabling early response. If a pathogen is not contained, the situation needs to be assessed as Stage II, 'investigation'. Here, surveillance obtains critical epidemiological information to decide on the appropriate intervention strategy to reduce or eradicate a disease in Stage III, 'implementation'. Stage III surveillance informs the choice, timing, and scale of interventions and documents the progress of interventions directed at prevalence reduction in the population. Summary This article originates from a research project to develop a conceptual

EPA Technical Support Centers (TSC): FY14 Lessons ...

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati

Anterolateral corridor approach to the infratemporal fossa and central skull base in maxillectomy: rationale and technical aspects.

PubMed

McMahon, Jeremy D; Crowther, John; Taylor, William M; Wong, Ling Siew; Paterson, Tom; Devine, John; Wales, Craig; MacIver, Colin

2015-11-01

We describe the technical aspects and report our clinical experience of a surgical approach to the infratemporal fossa that aims to reduce local recurrence after operations for cancer of the posterior maxilla. We tested the technique by operating on 3 cadavers and then used the approach in 16 patients who had posterolateral maxillectomy for disease that arose on the maxillary alveolus or junction of the hard and soft palate (maxillary group), and in 19 who had resection of the masticatory compartment and central skull base for advanced sinonasal cancer (sinonasal group). Early proximal ligation of the maxillary artery was achieved in all but one of the 35 patients. Access to the infratemporal fossa enabled division of the pterygoid muscles and pterygoid processes under direct vision in all cases. No patient in the maxillary group had local recurrence at median follow up of 36 months. Four patients (21%) in the sinonasal group had local recurrence at median follow up of 27 months. Secondary haemorrhage from the cavernous segment of the internal carotid artery resulted in the only perioperative death. The anterolateral corridor approach enables controlled resection of tumours that extend into the masticatory compartment. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

[Home hemodialysis: the technical overview. A 2010 survey].

PubMed

Ponson, Laurent; Arkouche, Walid; Laville, Maurice

2012-04-01

Compared to the daily work in dialysis units, home haemodialysis represents a particular task for the technical services of healthcare facilities. This survey concerns this modality of treatment of end-stage chronic renal failure, and was led to three objectives: to make a snapshot of the practices done by the technical staff, to point out significant differences, and to identify common issues. This is also an opportunity to discuss about the future of this treatment. Numbers of registries show a continuous decline of home haemodialysis during past decades. This could be explained by many factors, but on the other hand several points tend to forecast a renewed interest for this method of treatment. A questionnaire was sent to every technical service of health organizations dispensing dialysis in France. Seventeen health facilities providing home haemodialysis have sent back their information, representing 238 patients, that to say almost the totality of the patients of the country. These data were analysed, relevant indicators were sorted out, so that initial objectives could be completed. The results are explained as follows: site activities, procedures before and during patient installation, equipment, preventive visits, and corrective maintenance. In lack of a precise regulation on the technical support of these patients, significant differences of operations were noted and are detailed, as well as several common difficulties. All these elements can be used as a basis for the development of a practical guide intended to technical services. This work is voluntarily centered on the technical aspects, but other levers exist to revitalize this method. Copyright © 2012 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

Presentation to US-Canada Bilateral Technical Working ...

EPA Pesticide Factsheets

DHS and EPA have collaborated in the development of a draft charter for Technical Working Group (TWG) to serve as the basis of negotiations of bilateral agreements with other countries. The TWG would provide a mechanism for sharing both response and R&D expertise and experience in the event of a CBRN incident. The membership of each TWG was tailored to provide appropriate support to the incident commander for the particular situation. Some of the same expertise has been engaged in response to the

One-and-a-half nostril endoscopic transsphenoidal approach for pituitary adenomas-a technical report.

PubMed

Wen, Guodao; Tang, Chao; Zhong, Chunyu; Li, Junyang; Cong, Zixiang; Zhou, Yuan; Liu, Kaidong; Zhang, Yong; Tohti, Mamatemin; Ma, Chiyuan

2016-11-15

Binostril endoscopic transsphenoidal approach (BETA) provides sufficient manipulation space and wide endoscopic vision, although it increases the trauma of nose. Mononostril endoscopic transsphenoidal approach (META) has minimal trauma of nose, at the expense of space within the operation. We describe a one-and-a-half nostril endoscopic transsphenoidal approach (OETA) that combines the advantages of BETA and META. We introduced OETA for pituitary adenomas with a detailed technical description. A retrospective analysis was also performed on 57 consecutive patients who underwent one-and-a-half nostril endoscopic transsphenoidal surgery between March 2014 and June 2015 at Jinling hospital. The gross total resection rate was 79%. The gross complete resection rate of Knosp grade 3 tumors were 63.6, and 27.3% in grade 4 tumors. Postoperative hormone remission was achieved in 14 out of 18 (77.8%) patients with secreting adenomas. Postoperative abnormal visual function improvement was achieved in 23 out of 32 patients (73%) with preoperative visual dysfunction. The overall intra-operative CSF leak was 17.5%, with the postoperative CSF leak decreased to 3.5% after the sellar reconstruction with the unilateral "rescue" nasoseptal flap procedure. The main sinonasal complaints 2 weeks after surgery were: loss of sense of smell (28%), decrease in sense of taste (4%), trouble breathing during the day (18%), thick nasal discharge (36%), post nasal discharge (8%), dried nasal material (6%), and headache (6%). Three months after surgery, there were no reports of decrease of taste, post nasal discharge, or dried nasal material. Other complaints were decreased significantly. Six months after surgery, the main complaints of sinonasal quality of life were negligible, and overall health status was near complete recovery to preoperative status. The one-and-a-half nostril endoscopic transsphenoidal approach for pituitary adenomas is a simple and reliable technique. It provides not only a

Technical Communication: Perspectives for the Eighties, Part 1. Proceedings of the Technical Communications Sessions at the 32Nd Annual Meeting of the Conference on College Composition and Communication

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

Proceeding of the technical communication sessions at the 32nd annual meeting of the Conference on College Composition and Communication held in Dallas, Texas, March 26-28, 1981 are summarized. The proceeding suggest that technical communication has become an important subfield and is becoming an intrinsic part of many undergraduate curricula. Technical communication as a separate discipline, however, is relatively new. For that reason, proceedings that can make current research available as quickly as possible are suggested for preparation. The following topics were addressed: (1) a history and definition of technical writing, (2) the case method is technical communication (3) teaching technical writing (4) oral communication and rhetorical theory, and (5) new approaches in and practical applications of technical writing.

A prescribed wake rotor inflow and flow field prediction analysis, user's manual and technical approach

NASA Technical Reports Server (NTRS)

Egolf, T. A.; Landgrebe, A. J.

1982-01-01

A user's manual is provided which includes the technical approach for the Prescribed Wake Rotor Inflow and Flow Field Prediction Analysis. The analysis is used to provide the rotor wake induced velocities at the rotor blades for use in blade airloads and response analyses and to provide induced velocities at arbitrary field points such as at a tail surface. This analysis calculates the distribution of rotor wake induced velocities based on a prescribed wake model. Section operating conditions are prescribed from blade motion and controls determined by a separate blade response analysis. The analysis represents each blade by a segmented lifting line, and the rotor wake by discrete segmented trailing vortex filaments. Blade loading and circulation distributions are calculated based on blade element strip theory including the local induced velocity predicted by the numerical integration of the Biot-Savart Law applied to the vortex wake model.

Technical Services Cost Studies in ARL Libraries. SPEC Kit 125.

ERIC Educational Resources Information Center

Hoerman, Heidi Lee

Based on a survey of Association of Research Libraries (ARL) member libraries in February 1986, this kit is designed to illustrate a wide range of alternative approaches to analyzing the costs of technical services. The kit consists of the following unedited primary-source documents: (1) SPEC Technical Services Costs Survey (Three-Year Update)…

From Industry to Teaching: The Quality Instruction Program at Hocking Technical College.

ERIC Educational Resources Information Center

Moran, Ralph; And Others

This presentation on Hocking Technical College's (HTC's) Quality Instruction Program (QIP) provides a program description and comments from three HTC faculty members who have been involved in the program in various ways. Recognizing that many faculty members are hired on the basis of their industrial credentials rather than their teaching…

A Critical Review of the Technical Characteristics of Current Preschool Screening Batteries

ERIC Educational Resources Information Center

Emmons, Michael R.; Alfonso, Vincent C.

2005-01-01

The current review provides a summary and evaluation of the technical characteristics of five preschool screening batteries, including the Brigance Screens, DIAL-3, ESI-R, ESP, and FirstSTEP. These norm-referenced instruments were selected on the basis of their commercial availability, description as a screening instrument, and ability to assess…

International Approaches for Nuclear Waste Disposal in Geological Formations: Report on Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Persoff, Peter

2016-09-01

The goal of the Fifth Worldwide Review is to document evolution in the state-of-the-art of approaches for nuclear waste disposal in geological formations since the Fourth Worldwide Review that was released in 2006. The last ten years since the previous Worldwide Review has seen major developments in a number of nations throughout the world pursuing geological disposal programs, both in preparing and reviewing safety cases for the operational and long-term safety of proposed and operating repositories. The countries that are approaching implementation of geological disposal will increasingly focus on the feasibility of safely constructing and operating their repositories in short-more » and long terms on the basis existing regulations. The WWR-5 will also address a number of specific technical issues in safety case development along with the interplay among stakeholder concerns, technical feasibility, engineering design issues, and operational and post-closure safety. Preparation and publication of the Fifth Worldwide Review on nuclear waste disposal facilitates assessing the lessons learned and developing future cooperation between the countries. The Report provides scientific and technical experiences on preparing for and developing scientific and technical bases for nuclear waste disposal in deep geologic repositories in terms of requirements, societal expectations and the adequacy of cases for long-term repository safety. The Chapters include potential issues that may arise as repository programs mature, and identify techniques that demonstrate the safety cases and aid in promoting and gaining societal confidence. The report will also be used to exchange experience with other fields of industry and technology, in which concepts similar to the design and safety cases are applied, as well to facilitate the public perception and understanding of the safety of the disposal approaches relative to risks that may increase over long times frames in the absence of a

[Regional ophthalmological cluster as a resource basis for the process and the procedure of specialist accreditation].

PubMed

Chukhraev, A M; Khodzhaev, N S; Malyugin, B E; Doga, A V; Zabolotniy, A G

Since 2016, phased introduction of specialist accreditation has been launched. Many issues like how training at regional accreditation centers (RACs) should be organized - for applicants applying for primary specialized accreditation as residents in ophthalmology (2018) or periodic accreditation as practicing ophthalmologists (2021) - are yet debatable. to provide organizational and educational resources for arranging accreditation of ophthalmologists at the background of improving the quality of medical care in a federal subject of the Russian Federation. The study object was the process and the procedure of accreditation, the study subject - the system of specialist accreditation. bibliographical, analytical, and expert. Methodological basis for tasks solving: mobilization of an independent organizational structure, that is, the regional ophthalmological scientific-educational cluster (ROSEC). Three complex problems have been defined that require solution. 1. Discrepancies between accreditation procedures depending on the type of accreditation. The absence of practical skills assessment within the periodical accreditation procedure and low availability of innovative simulation systems impede the achievement of the declared goals of accreditation. 2. The absence of a clear order and criteria for portfolio assessment as well as a legal format of its formation during non-interrupted medical education (NIME) demands active management. 3. There is still a lack of appropriate organizational, educational, material technical, and personnel support of the accreditation system. The proposed organizational and methodological approaches are aimed at solving issues of accreditation support, proper functioning of RACs, and improving the quality and regional availability of NIME. Systematic approach effectively solves the problem of resource support of accreditation. ROSEC should be regarded as the provision basis for complex of all stages of ophthalmologist accreditation and

Density matrix modeling of quantum cascade lasers without an artificially localized basis: A generalized scattering approach

NASA Astrophysics Data System (ADS)

Pan, Andrew; Burnett, Benjamin A.; Chui, Chi On; Williams, Benjamin S.

2017-08-01

We derive a density matrix (DM) theory for quantum cascade lasers (QCLs) that describes the influence of scattering on coherences through a generalized scattering superoperator. The theory enables quantitative modeling of QCLs, including localization and tunneling effects, using the well-defined energy eigenstates rather than the ad hoc localized basis states required by most previous DM models. Our microscopic approach to scattering also eliminates the need for phenomenological transition or dephasing rates. We discuss the physical interpretation and numerical implementation of the theory, presenting sets of both energy-resolved and thermally averaged equations, which can be used for detailed or compact device modeling. We illustrate the theory's applications by simulating a high performance resonant-phonon terahertz (THz) QCL design, which cannot be easily or accurately modeled using conventional DM methods. We show that the theory's inclusion of coherences is crucial for describing localization and tunneling effects consistent with experiment.

Systems Engineering Technical Authority: A Path to Mission Success

NASA Technical Reports Server (NTRS)

Andary, James F.; So, Maria M.; Breindel, Barry

2008-01-01

The systems engineering of space missions to study planet Earth has been an important focus of the National Aeronautics and Space Administration (NASA) since its inception. But all space missions are becoming increasingly complex and this fact, reinforced by some major mishaps, has caused NASA to reevaluate their approach to achieving safety and mission success. A new approach ensures that there are adequate checks and balances in place to maximize the probability of safety and mission success. To this end the agency created the concept of Technical Authority which identifies a key individual accountable and responsible for the technical integrity of a flight mission as well as a project-independent reporting path. At the Goddard Space Flight Center (GSFC) this responsibility ultimately begins with the Mission Systems Engineer (MSE) for each satellite mission. This paper discusses the Technical Authority process and then describes some unique steps that are being taken at the GSFC to support these MSEs in meeting their responsibilities.

The role of organisational support in teleworker wellbeing: a socio-technical systems approach.

PubMed

Bentley, T A; Teo, S T T; McLeod, L; Tan, F; Bosua, R; Gloet, M

2016-01-01

The prevalence of telework and other forms of mobile working enabled by digital technology is increasing markedly. Following a socio-technical systems approach, this study aims to examine the role of organisational social support and specific support for teleworkers in influencing teleworker wellbeing, the mediating role of social isolation, potentially resulting from a person-environment mismatch in these relationships, and possible differences in these relationships between low-intensity and hybrid teleworkers. Teleworkers' (n = 804) perceptions of support and telework outcomes (psychological strain, job satisfaction, and social isolation) were collected using an on-line survey of teleworking employees distributed within 28 New Zealand organisations where knowledge work was undertaken. Organisational social support and teleworker support was associated with increased job satisfaction and reduced psychological strain. Social isolation mediated the relationship between organisational social support and the two outcome variables, and some differences were observed in the structural relationships for hybrid and low-intensity teleworker sub-samples. These findings suggest that providing the necessary organisational and teleworker support is important for enhancing the teleworker-environment fit and thereby ensuring desirable telework outcomes. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Technical Assistance Model for Long-Term Systems Change: Three State Examples

ERIC Educational Resources Information Center

Kasprzak, Christina; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

2010-01-01

The National Early Childhood Technical Assistance Center (NECTAC) Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) is grounded in conceptual frameworks in the literature on systems change and systems thinking. The NECTAC conceptual framework uses a logic model approach to change developed specifically for states' infant and…

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

Managing corporate capabilities:theory and industry approaches.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slavin, Adam M.

2007-02-01

This study characterizes theoretical and industry approaches to organizational capabilities management and ascertains whether there is a distinct ''best practice'' in this regard. We consider both physical capabilities, such as technical disciplines and infrastructure, and non-physical capabilities such as corporate culture and organizational procedures. We examine Resource-Based Theory (RBT), which is the predominant organizational management theory focused on capabilities. RBT seeks to explain the effect of capabilities on competitiveness, and thus provide a basis for investment/divestment decisions. We then analyze industry approaches described to us in interviews with representatives from Goodyear, 3M, Intel, Ford, NASA, Lockheed Martin, and Boeing. Wemore » found diversity amongst the industry capability management approaches. Although all organizations manage capabilities and consider them to some degree in their strategies, no two approaches that we observed were identical. Furthermore, we observed that theory is not a strong driver in this regard. No organization used the term ''Resource-Based Theory'', nor did any organization mention any other guiding theory or practice from the organizational management literature when explaining their capabilities management approaches. As such, we concluded that there is no single best practice for capabilities management. Nevertheless, we believe that RBT and the diverse industry experiences described herein can provide useful insights to support development of capabilities management approaches.« less

Linking Gateway Technical College with Workforce Development: The SC Johnson-A Family Company Story.

ERIC Educational Resources Information Center

Knudson, Edward

2004-01-01

Seven years ago, SC Johnson--A Family Company approached Gateway Technical College with a need to further strengthen their incumbent workforce's technical training and education. Retirements, brain drain, and competition for technical expertise were the forces driving SC Johnson to develop a comprehensive, flexible, and timely workplace education…

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Accounting for model error in Bayesian solutions to hydrogeophysical inverse problems using a local basis approach

NASA Astrophysics Data System (ADS)

Köpke, Corinna; Irving, James; Elsheikh, Ahmed H.

2018-06-01

Bayesian solutions to geophysical and hydrological inverse problems are dependent upon a forward model linking subsurface physical properties to measured data, which is typically assumed to be perfectly known in the inversion procedure. However, to make the stochastic solution of the inverse problem computationally tractable using methods such as Markov-chain-Monte-Carlo (MCMC), fast approximations of the forward model are commonly employed. This gives rise to model error, which has the potential to significantly bias posterior statistics if not properly accounted for. Here, we present a new methodology for dealing with the model error arising from the use of approximate forward solvers in Bayesian solutions to hydrogeophysical inverse problems. Our approach is geared towards the common case where this error cannot be (i) effectively characterized through some parametric statistical distribution; or (ii) estimated by interpolating between a small number of computed model-error realizations. To this end, we focus on identification and removal of the model-error component of the residual during MCMC using a projection-based approach, whereby the orthogonal basis employed for the projection is derived in each iteration from the K-nearest-neighboring entries in a model-error dictionary. The latter is constructed during the inversion and grows at a specified rate as the iterations proceed. We demonstrate the performance of our technique on the inversion of synthetic crosshole ground-penetrating radar travel-time data considering three different subsurface parameterizations of varying complexity. Synthetic data are generated using the eikonal equation, whereas a straight-ray forward model is assumed for their inversion. In each case, our developed approach enables us to remove posterior bias and obtain a more realistic characterization of uncertainty.

Scenarios for exercising technical approaches to verified nuclear reductions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doyle, James

2010-01-01

information for establishing a conceptual approach to a five-year technical program plan for research and development of nuclear arms reductions verification and transparency technologies and procedures.« less

Information Design: A New Approach to Teaching Technical Writing Service Courses

ERIC Educational Resources Information Center

McKee, Candie DeLane

2012-01-01

This study used a needs assessment, process analysis, process design, and textbook design to develop a new process and new textbook, based on Cargile-Cook's layered literacies, Quesenbery's five qualities of usability, and Carliner's information design theories, for use in technical writing service learning courses. The needs assessment was based…

Simulated lumbar minimally invasive surgery educational model with didactic and technical components.

PubMed

Chitale, Rohan; Ghobrial, George M; Lobel, Darlene; Harrop, James

2013-10-01

The learning and development of technical skills are paramount for neurosurgical trainees. External influences and a need for maximizing efficiency and proficiency have encouraged advancements in simulator-based learning models. To confirm the importance of establishing an educational curriculum for teaching minimally invasive techniques of pedicle screw placement using a computer-enhanced physical model of percutaneous pedicle screw placement with simultaneous didactic and technical components. A 2-hour educational curriculum was created to educate neurosurgical residents on anatomy, pathophysiology, and technical aspects associated with image-guided pedicle screw placement. Predidactic and postdidactic practical and written scores were analyzed and compared. Scores were calculated for each participant on the basis of the optimal pedicle screw starting point and trajectory for both fluoroscopy and computed tomographic navigation. Eight trainees participated in this module. Average mean scores on the written didactic test improved from 78% to 100%. The technical component scores for fluoroscopic guidance improved from 58.8 to 52.9. Technical score for computed tomography-navigated guidance also improved from 28.3 to 26.6. Didactic and technical quantitative scores with a simulator-based educational curriculum improved objectively measured resident performance. A minimally invasive spine simulation model and curriculum may serve a valuable function in the education of neurosurgical residents and outcomes for patients.

Crew Transportation Technical Management Processes

NASA Technical Reports Server (NTRS)

Mckinnie, John M. (Compiler); Lueders, Kathryn L. (Compiler)

2013-01-01

Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document, with its sister documents, International Space Station (ISS) Crew Transportation and Services Requirements Document (CCT-REQ-1130), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), Crew Transportation Operations Standards (CCT STD-1150), and ISS to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase.

The Acoustical Presentation of Technical Information.

ERIC Educational Resources Information Center

Barnett, George A.

1992-01-01

Advocates listening to technical information in much the same way as scientists and engineers look at graphics to understand the relationships among variables. Specifies a number of potential benefits of this approach. Demonstrates the presentation of acoustic information with data on the frequency of television viewing from 1950 to 1988. (SR)

Flammable Gas Technical Basis Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO, C.A.

2003-07-30

This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls. Revision 1 incorporates comments received from ORP.

Flammable gas technical basis document

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO, C.A.

2003-03-22

This document qualitatively evaluates the frequency and consequences of DST and SST representative flammable gas accidents and associated represented hazardous conditions without controls. Based on the evaluation, it was determined that safety-significant SSCs and/or TSRs were required to prevent or mitigate flammable gas accidents. Controls were selected and the accidents re-evaluated taking credit for the controls.

Technical literature review.

PubMed

Nußbeck, Gunnar; Gök, Murat

2013-01-01

This review gives a comprehensive overview on the technical perspective of personal health monitoring. It is designed to build a mutual basis for the project partners of the PHM-Ethics project. A literature search was conducted to screen pertinent literature databases for relevant publications. All review papers that were retrieved were analyzed. The increasing number of publications that are published per year shows that the field of personal health monitoring is of growing interest in the research community. Most publications deal with telemonitoring, thus forming the core technology of personal health monitoring. Measured parameters, fields of application, participants and stakeholders are described. Moreover an outlook on information and communication technology that foster the integration possibilities of personal health monitoring into decision making and remote monitoring of individual people's health is provided. The removal of the technological barriers opens new perspectives in health and health care delivery using home monitoring applications.

INDOT Technical Training Plan : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

Percutaneous Treatment of Coronary Chronic Total Occlusion Part 2: Technical Approach

PubMed Central

Galassi, Alfredo; Grantham, Aaron; Kandzari, David; Lombardi, William; Moussa, Issam; Thompson, Craig; Werner, Gerald; Chambers, Charles

2014-01-01

Dual injection is recommended for nearly all chronic total occlusion (CTO) percutaneous coronary intervention (PCI) to determine the optimal crossing strategy and guide wire advancement into the distal true lumen. Strategies that provide enhanced guide catheter support (such as long sheaths, large-bore guiding catheters, use of guide catheter extensions, and anchor techniques) are important for maximising the success rate and efficiency of CTO PCI. Use of a microcatheter or over-the-wire balloon is strongly recommended in CTO PCI for enhancing the penetrating power of the guidewire, enabling change in tip shape and allowing guidewire change (stiff CTO guidewires are not optimal for crossing non-occluded coronary segments). Adherence to a procedural strategy that standardises CTO technique and facilitates procedural success is recommended. Such a strategy would permit stepwise decision-making for antegrade and retrograde methods; inform guidewire selection; and incorporate alternative approaches for instances of initial failure. Given the paucity of long-term outcomes with use of novel crossing techniques (antegrade dissection/re-entry and retrograde), antegrade wire escalation is the preferred CTO crossing technique, if technically feasible. Using measures to minimise radiation exposure (including but not limited to use of 7.5 frames per second fluoroscopy and use of low magnification) and contrast administration is recommended. CTO PCI is best performed at centres with dedicated CTO PCI experience and expertise. Use of crossing difficulty prediction tools, such as the J-CTO score, can facilitate the selection of cases with a high likelihood of quick crossing that can be attempted at less experienced centres. PMID:29588803

Physics of Musical Instruments Minicourse, Career Oriented Pre-Technical Physics. Preliminary Edition.

ERIC Educational Resources Information Center

Bullock, Bob; And Others

This minicourse was prepared for use with secondary physics students in the Dallas Independent School District and is one option in a physics program which provides for the selection of topics on the basis of student career needs and interests. This minicourse was aimed at providing students with a knowledge of the technical descriptions of music,…

Technical Feasibility Study for Zero Energy K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, Eric; Goldwasser, David; Torcellini, Paul

This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

A phenomenographic study of the ability to address complex socio-technical systems via variation theory

NASA Astrophysics Data System (ADS)

Mendoza Garcia, John A.

Sometimes engineers fail when addressing the inherent complexity of socio-technical systems because they lack the ability to address the complexity of socio-technical systems. Teaching undergraduate engineering students how to address complex socio-technical systems, has been an educational endeavor at different levels ranging from kindergarten to post-graduate education. The literature presents different pedagogical strategies and content to reach this goal. However, there are no existing empirically-based assessments guided by a learning theory. This may be because at the same time explanations of how the skill is developed are scarce. My study bridges this gap, and I propose a developmental path for the ability to address the complex socio-technical systems via Variation Theory, and according to the conceptual framework provided by Variation Theory, my research question was "What are the various ways in which engineers address complex socio-technical systems?" I chose the research approach of phenomenography to answer my research question. I also chose to use a blended approach, Marton's approach for finding the dimensions of variation, and the developmental approach (Australian) for finding a hierarchical relationship between the dimensions. Accordingly, I recruited 25 participants with different levels of experience with addressing complex socio-technical systems and asked them all to address the same two tasks: A design of a system for a county, and a case study in a manufacturing firm. My outcome space is a nona-dimensional (nine) developmental path for the ability to address the complexity in socio-technical systems, and I propose 9 different ways of experiencing the complexity of a socio-technical system. The findings of this study suggest that the critical aspects that are needed to address the complexity of socio-technical systems are: being aware of the use of models, the ecosystem around, start recognizing different boundaries, being aware of time as a

An Integrated model for Product Quality Development—A case study on Quality functions deployment and AHP based approach

NASA Astrophysics Data System (ADS)

Maitra, Subrata; Banerjee, Debamalya

2010-10-01

Present article is based on application of the product quality and improvement of design related with the nature of failure of machineries and plant operational problems of an industrial blower fan Company. The project aims at developing the product on the basis of standardized production parameters for selling its products in the market. Special attention is also being paid to the blower fans which have been ordered directly by the customer on the basis of installed capacity of air to be provided by the fan. Application of quality function deployment is primarily a customer oriented approach. Proposed model of QFD integrated with AHP to select and rank the decision criterions on the commercial and technical factors and the measurement of the decision parameters for selection of best product in the compettitive environment. The present AHP-QFD model justifies the selection of a blower fan with the help of the group of experts' opinion by pairwise comparison of the customer's and ergonomy based technical design requirements. The steps invoved in implementation of the QFD—AHP and selection of weighted criterion may be helpful for all similar purpose industries maintaining cost and utility for competitive product.

The International Linear Collider Technical Design Report - Volume 3.I: Accelerator \\& in the Technical Design Phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adolphsen, Chris

2013-06-26

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carriedmore » out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.« less

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. L. Sharp; R. T. McCracken

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzedmore » in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR

A review of genome-wide approaches to study the genetic basis for spermatogenic defects.

PubMed

Aston, Kenneth I; Conrad, Donald F

2013-01-01

Rapidly advancing tools for genetic analysis on a genome-wide scale have been instrumental in identifying the genetic bases for many complex diseases. About half of male infertility cases are of unknown etiology in spite of tremendous efforts to characterize the genetic basis for the disorder. Advancing our understanding of the genetic basis for male infertility will require the application of established and emerging genomic tools. This chapter introduces many of the tools available for genetic studies on a genome-wide scale along with principles of study design and data analysis.

A Bayesian spatial model for neuroimaging data based on biologically informed basis functions.

PubMed

Huertas, Ismael; Oldehinkel, Marianne; van Oort, Erik S B; Garcia-Solis, David; Mir, Pablo; Beckmann, Christian F; Marquand, Andre F

2017-11-01

The dominant approach to neuroimaging data analysis employs the voxel as the unit of computation. While convenient, voxels lack biological meaning and their size is arbitrarily determined by the resolution of the image. Here, we propose a multivariate spatial model in which neuroimaging data are characterised as a linearly weighted combination of multiscale basis functions which map onto underlying brain nuclei or networks or nuclei. In this model, the elementary building blocks are derived to reflect the functional anatomy of the brain during the resting state. This model is estimated using a Bayesian framework which accurately quantifies uncertainty and automatically finds the most accurate and parsimonious combination of basis functions describing the data. We demonstrate the utility of this framework by predicting quantitative SPECT images of striatal dopamine function and we compare a variety of basis sets including generic isotropic functions, anatomical representations of the striatum derived from structural MRI, and two different soft functional parcellations of the striatum derived from resting-state fMRI (rfMRI). We found that a combination of ∼50 multiscale functional basis functions accurately represented the striatal dopamine activity, and that functional basis functions derived from an advanced parcellation technique known as Instantaneous Connectivity Parcellation (ICP) provided the most parsimonious models of dopamine function. Importantly, functional basis functions derived from resting fMRI were more accurate than both structural and generic basis sets in representing dopamine function in the striatum for a fixed model order. We demonstrate the translational validity of our framework by constructing classification models for discriminating parkinsonian disorders and their subtypes. Here, we show that ICP approach is the only basis set that performs well across all comparisons and performs better overall than the classical voxel-based approach

Fossil energy technical manpower: forecasts of supply and demand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman, B.S.

1975-10-01

The nation's overall need for engineers and physical scientists will continue to grow but is not expected to outpace the production of new graduates in these fields. Technical manpower shortages that might hinder the nation's fossil and other energy programs are not likely to occur. If a shortage does become a real threat, it could be countered by corrective actions: intensify efforts to sign up or retrieve the thousands of engineers and physical scientists who leave their technical field soon after graduation; recruit graduates, now working in other fields, who have potential for retraining in the critical area; increase themore » productivity of professionals through greater use of para-professionals or technicians; shorten the education pipeline by encouraging students to shift mid-stream from related disciplines to those in short supply; and as a last resort, admit the requisite number of non-quota immigrants with the desired training. Government agencies and industry are advised not to engage in campaigns to stimulate enrollment in specific technical fields. Such recruiting is usually a ''too-much, too-late'' measure. Forecasts of job opportunities are self-defeating and very often misleading. It is, therefore, unethical to use them as a basis for persuading high school students to enroll in specific disciplines. Certain kinds of student recruiting are, however, recommended: selective recruiting to attract more of the high-calibre students; and selective recruiting and use of stipends to attract more female, minority and/or low-income students with high potential. If universities recruit, it should be on the basis of intrinsic interest in a particular discipline, rather than on job outlook. As always, there is a need to improve the calibre and competence of the university ''end-product.'' Several programs and actions designed to do this are recommended for universities, ERDA and other governmental agencies, professional societies and industry.« less

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

Diffusion of Technical Agricultural Information in Chile.

ERIC Educational Resources Information Center

Brown, Marion Ray

This study examined current thought concerning the role of mass communication in economic development in developing nations; analyzed existing efforts to diffuse agricultural technology in Chile; assessed the effectiveness of various approaches; and tested the effects (primarily on knowledge levels) of an experimental technical information service…

Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R. A.

The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less

A Risk-Based Approach to Variable Load Configuration Validation in Steam Sterilization: Application of PDA Technical Report 1 Load Equivalence Topic.

PubMed

Pavell, Anthony; Hughes, Keith A

2010-01-01

This article describes a method for achieving the load equivalence model, described in Parenteral Drug Association Technical Report 1, using a mass-based approach. The item and load bracketing approach allows for mixed equipment load size variation for operational flexibility along with decreased time to introduce new items to the operation. The article discusses the utilization of approximately 67 items/components (Table IV) identified for routine sterilization with varying quantities required weekly. The items were assessed for worst-case identification using four temperature-related criteria. The criteria were used to provide a data-based identification of worst-case items, and/or item equivalence, to carry forward into cycle validation using a variable load pattern. The mass approach to maximum load determination was used to bracket routine production use and allows for variable loading patterns. The result of the item mapping and load bracketing data is "a proven acceptable range" of sterilizing conditions including loading configuration and location. The application of these approaches, while initially more time/test-intensive than alternate approaches, provides a method of cycle validation with long-term benefit of ease of ongoing qualification, minimizing time and requirements for new equipment qualification for similar loads/use, and for rapid and rigorous assessment of new items for sterilization.

The economic basis for national science and technology policy

NASA Technical Reports Server (NTRS)

Dunn, D. A.

1979-01-01

National science and technology policy is concerned with societal choices with respect to the rate and directions of technological change and the adoption and use of new technology in society. Such policy choices occur primarily in connection with management of the creation, dissemination, and use of scientific and technical information. Two categories of policy instruments discussed are market-oriented approaches, and direct public action. Possibilities for increased use of market-oriented approaches that can provide benefits to society in the form of an increased rate of innovation and of more 'appropriate' technology, better suited to the needs of consumers are indicated.

New totally intracorporeal reconstructive approach after robotic total gastrectomy: Technical details and short-term outcomes

PubMed Central

Parisi, Amilcare; Ricci, Francesco; Gemini, Alessandro; Trastulli, Stefano; Cirocchi, Roberto; Palazzini, Giorgio; D’Andrea, Vito; Desiderio, Jacopo

2017-01-01

AIM To show outcomes of our series of patients that underwent a total gastrectomy with a robotic approach and highlight the technical details of a proposed solution for the reconstruction phase. METHODS Data of gastrectomies performed from May 2014 to October 2016, were extracted and analyzed. Basic characteristics of patients, surgical and clinical outcomes were reported. The technique for reconstruction (Parisi Technique) consists on a loop of bowel shifted up antecolic to directly perform the esophago-enteric anastomosis followed by a second loop, measured up to 40 cm starting from the esojejunostomy, fixed to the biliary limb to create an enteroenteric anastomosis. The continuity between the two anastomoses is interrupted just firing a linear stapler, so obtaining the Roux-en-Y by avoiding to interrupt the mesentery. RESULTS Fifty-five patients were considered in the present analysis. Estimated blood loss was 126.55 ± 73 mL, no conversions to open surgery occurred, R0 resections were obtained in all cases. Hospital stay was 5 (3-17) d, no anastomotic leakage occurred. Overall, a fast functional recovery was shown with a median of 3 (3-6) d in starting a solid diet. CONCLUSION Robotic surgery and the adoption of a tailored reconstruction technique have increased the feasibility and safety of a minimally invasive approach for total gastrectomy. The present series of patients shows its implementation in a western center with satisfying short-term outcomes. PMID:28694670

Murine macrophages: a technical approach.

PubMed

Martinez-Pomares, Luisa; Gordon, Siamon

2008-01-01

In this chapter, we describe current protocols used for the characterization of macrophages (MPhi) in mouse tissues and in cell suspensions from spleen and lymph nodes. Also, we include a brief description of a complementary approach: culture of primary MPhi. Although culture MPhi are extremely useful for analysing the basic biology of MPhi and their receptors, it should not be forgotten that the term MPhi encompasses a wide range of different types of cells with phenotypic characteristics dependent on their activation state and tissue of origin. In our view, there is no perfect MPhi marker and analysis of the expression profile of several markers, and functional studies are required to make an informed guess of the cellular characteristics and function of the MPhi population of interest.

Current technical approaches to brain energy metabolism.

PubMed

Barros, L Felipe; Bolaños, Juan P; Bonvento, Gilles; Bouzier-Sore, Anne-Karine; Brown, Angus; Hirrlinger, Johannes; Kasparov, Sergey; Kirchhoff, Frank; Murphy, Anne N; Pellerin, Luc; Robinson, Michael B; Weber, Bruno

2018-06-01

Neuroscience is a technology-driven discipline and brain energy metabolism is no exception. Once satisfied with mapping metabolic pathways at organ level, we are now looking to learn what it is exactly that metabolic enzymes and transporters do and when, where do they reside, how are they regulated, and how do they relate to the specific functions of neurons, glial cells, and their subcellular domains and organelles, in different areas of the brain. Moreover, we aim to quantify the fluxes of metabolites within and between cells. Energy metabolism is not just a necessity for proper cell function and viability but plays specific roles in higher brain functions such as memory processing and behavior, whose mechanisms need to be understood at all hierarchical levels, from isolated proteins to whole subjects, in both health and disease. To this aim, the field takes advantage of diverse disciplines including anatomy, histology, physiology, biochemistry, bioenergetics, cellular biology, molecular biology, developmental biology, neurology, and mathematical modeling. This article presents a well-referenced synopsis of the technical side of brain energy metabolism research. Detail and jargon are avoided whenever possible and emphasis is given to comparative strengths, limitations, and weaknesses, information that is often not available in regular articles. © 2017 Wiley Periodicals, Inc.

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

PubMed

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

Agreement between the government of the Federal Republic of Germany and the government of the Union of Soviet Socialist Republics concerning scientific-technical cooperation

NASA Technical Reports Server (NTRS)

1986-01-01

An agreement between the government of the Federal Republic of Germany and the government of the Union of Soviet Socialist Republics concerning scientific technical cooperation is disclosed. The parties to the treaty agree to promote scientific and technical cooperation on a basis of equality, reciprocity and mutual advantage.

Expanding and Redirecting Historical Research in Technical Writing: In Search of Our Past.

ERIC Educational Resources Information Center

Tebeaux, Elizabeth; Killingsworth, M. Jimmie

1992-01-01

Suggests an approach for expanding and integrating research to produce a history of technical writing. Defines problems that reside in writing such a history, suggests research premises and questions, and then applies these questions to technical writing as it existed in the English Renaissance, 1475-1640. (SR)

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Exploration Medical System Technical Development

NASA Technical Reports Server (NTRS)

McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

2017-01-01

The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

Mediation of Artefacts, Tools and Technical Objects: An International and French Perspective

ERIC Educational Resources Information Center

Impedovo, Maria Antonietta; Andreucci, Colette; Ginestié, Jacques

2017-01-01

In this article we present a review of literature on the concept of Artefact, Tool and Technical Object in the light of sociocultural approach. Particular attention is given to present and discuss the French research tradition on the Technical Object and Technological education. The aim is to give a broad perspective to explore the mediation…

Antero-medial approach to the wrist: anatomic basis and new application in cases of fracture of the lunate facet.

PubMed

Uzel, A-P; Bulla, A; Laurent-Joye, M; Caix, P

2011-08-01

The Henry approach is the classical anterolateral surgical exposure of the volar aspect of the distal radius. This approach does not allow good access to the medial side of the volar distal radius (lunate facet) and the distal radio-ulnar joint, unless it is extended proximally, retracting the tendons and the median nerve medially, which can cause some trauma. The purpose of our study was to investigate the anatomic basis and to outline the advantages of the unusual anteromedial approach, reporting our experience in the treatment of 4 distal radius fractures, with a 90° or 180° twist of the lunate facet, and 10 wrist dissections on cadavers. The average follow-up was 68.8 months (range 18 to 115 months). In our series, this approach did not cause any nerve injuries or any sensory loss of the distal forearm and the palm. All the fractures of the lunate facet and of the radial styloid process healed. One patient with an ulnar styloid process fracture associated showed pseudarthrosis, but with no instability of the distal radio-ulnar joint or pain on the ulnar side. Using the criteria of Green and O'Brien, modified by Cooney, the results were: excellent in two cases, good in one case, and average in another. The evaluation of arthritis according to Knirk and Jupiter's classification showed grade 0 in three cases and grade 3 in one case with osteochondral sclerosis. We showed that the anteromedial approach is reliable and convenient in the case of fractures situated in the antero-medial portion of the radius, for the double objective of reducing the fracture under direct control and checking the congruence of the distal radio-ulnar joint.

Developing and Validating the Socio-Technical Model in Ontology Engineering

NASA Astrophysics Data System (ADS)

Silalahi, Mesnan; Indra Sensuse, Dana; Giri Sucahyo, Yudho; Fadhilah Akmaliah, Izzah; Rahayu, Puji; Cahyaningsih, Elin

2018-03-01

This paper describes results from an attempt to develop a model in ontology engineering methodology and a way to validate the model. The approach to methodology in ontology engineering is from the point view of socio-technical system theory. Qualitative research synthesis is used to build the model using meta-ethnography. In order to ensure the objectivity of the measurement, inter-rater reliability method was applied using a multi-rater Fleiss Kappa. The results show the accordance of the research output with the diamond model in the socio-technical system theory by evidence of the interdependency of the four socio-technical variables namely people, technology, structure and task.

Approximations to complete basis set-extrapolated, highly correlated non-covalent interaction energies.

PubMed

Mackie, Iain D; DiLabio, Gino A

2011-10-07

The first-principles calculation of non-covalent (particularly dispersion) interactions between molecules is a considerable challenge. In this work we studied the binding energies for ten small non-covalently bonded dimers with several combinations of correlation methods (MP2, coupled-cluster single double, coupled-cluster single double (triple) (CCSD(T))), correlation-consistent basis sets (aug-cc-pVXZ, X = D, T, Q), two-point complete basis set energy extrapolations, and counterpoise corrections. For this work, complete basis set results were estimated from averaged counterpoise and non-counterpoise-corrected CCSD(T) binding energies obtained from extrapolations with aug-cc-pVQZ and aug-cc-pVTZ basis sets. It is demonstrated that, in almost all cases, binding energies converge more rapidly to the basis set limit by averaging the counterpoise and non-counterpoise corrected values than by using either counterpoise or non-counterpoise methods alone. Examination of the effect of basis set size and electron correlation shows that the triples contribution to the CCSD(T) binding energies is fairly constant with the basis set size, with a slight underestimation with CCSD(T)∕aug-cc-pVDZ compared to the value at the (estimated) complete basis set limit, and that contributions to the binding energies obtained by MP2 generally overestimate the analogous CCSD(T) contributions. Taking these factors together, we conclude that the binding energies for non-covalently bonded systems can be accurately determined using a composite method that combines CCSD(T)∕aug-cc-pVDZ with energy corrections obtained using basis set extrapolated MP2 (utilizing aug-cc-pVQZ and aug-cc-pVTZ basis sets), if all of the components are obtained by averaging the counterpoise and non-counterpoise energies. With such an approach, binding energies for the set of ten dimers are predicted with a mean absolute deviation of 0.02 kcal/mol, a maximum absolute deviation of 0.05 kcal/mol, and a mean percent

Power, Language, and Professional Choices: A Hermeneutic Approach To Teaching Technical Communication.

ERIC Educational Resources Information Center

Tillery, Denise

2001-01-01

Argues that the philosophical hermeneutics of Hans-Georg Gadamer provides a useful theoretical framework from which to discuss ethical issues in the technical communication classroom. Analyzes a previously published case study to demonstrate how hermeneutics can shed light on the ways that writers can be unconscious of ethical problems in their…

A National Approach to Scientific and Technical Information in the United States.

ERIC Educational Resources Information Center

Becker, Joseph

Over the past 30 years, science has placed great stress on the importance of scientific and technical information (STI) to the individual scientist. The Baker, Crawford, Weinberg, SATCOM, Greenberger, and Conference Board reports extended this objective by emphasizing the need for new supporting methodology and by pointing up the critical…

Projected configuration of a coal-fired district heating source on the basis of comparative technical-economical optimization analysis

NASA Astrophysics Data System (ADS)

Tańczuk, Mariusz; Radziewicz, Wojciech; Olszewski, Eligiusz; Skorek, Janusz

2017-10-01

District heating technologies should be efficient, effective and environmentally friendly. The majority of the communal heating systems in Poland produce district hot water in coal-fired boilers. A large number of them are considerably worn out, low-efficient in the summer time and will not comply with forthcoming regulations. One of the possible solution for such plants is repowering with new CHP systems or new boilers fuelled with fuels alternative to coal. Optimisation analysis of the target configuration of municipal heat generating plant is analysed in the paper. The work concerns repowering the existing conventional heat generating plant according to eight different scenarios of the plant configuration meeting technical and environmental requirements forecasted for the year of 2035. The maximum demand for heat of the system supplied by the plant is 185 MW. Taking into account different technical configurations on one side, and different energy and fuel prices on the other side, the comparative cost-benefits analysis of the assumed scenarios has been made. The basic economical index NPV (net present value) has been derived for each analysed scenario and the results have been compared and discussed. It was also claimed that the scenario with CHP based on ICE engines is optimal.

The Relationship of Aptitudes to the Performance of Skilled Technical Jobs in Engine Manufacturing. Technical Report 1982-5 [and Supplement].

ERIC Educational Resources Information Center

Daniel, Mark; And Others

A study examined the relationship of aptitudes to the performance of skilled technical jobs in engine manufacturing. During the study, several approaches were utilized, including criterion-referenced validation, taxonomic validation, construct validation, and detailed anlaysis of the behaviors involved in performing the jobs. The study sample…

Teleworking in connection with technical aids for disabled persons.

PubMed

Alimandi, L; Andrich, R; Porqueddu, B

1995-01-01

An experimental teleworking arrangement was established between Milan and Rome in order to evaluate the use of multimedia technology and remote working for improving the service provided by an information and advice centre for the disabled. This activity requires a highly interdisciplinary approach and both clinical and technical expertise. The hypothesis was that offering the lone expert in Rome the possibility of teleconsulting with colleagues in Milan (where the whole range of expertise was available) would provide a comprehensive service for disabled clients asking for advice on technical aids in Rome. The results of an experiment demonstrated the feasibility of such teleworking and allowed a teleconsulting method to be defined that fits the specific needs of the technical-aid information service and improves quality.

CONCEPTUAL BASIS FOR MULTI-ROUTE INTAKE DOSE MODELING USING AN ENERGY EXPENDITURE APPROACH

EPA Science Inventory

This paper provides the conceptual basis for a modeling logic that is currently being developed in the National Exposure Research Laboratory (NERL) of the U.S. Environmental Protection Agency ( EPA) for use in intake dose assessments involving substances that can enter the body...

Technical assistance for law-enforcement communications: Grant summary

NASA Technical Reports Server (NTRS)

Reilly, N. B.

1979-01-01

A summary overview of project activities and results are presented. The goals and objectives are reviewed and a description of the approaches used to attain them is given. The feedback received from the seminars conducted as part of the project, and results from a questionnaire about the project are included. Significant findings of the project in such areas as radio channel loading, dispatch system design, training and technology transfer are discussed. Several specific problem areas are identified and evaluated. Specific recommendations for future technical assistance efforts are presented along with an inventory of technical-assistance reports generated throughout the project.

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

PubMed

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

The National Early Childhood Technical Assistance Center Model for Long-Term Systems Change

ERIC Educational Resources Information Center

Kahn, Lynne; Hurth, Joicey; Kasprzak, Christina M.; Diefendorf, Martha J.; Goode, Susan E.; Ringwalt, Sharon S.

2009-01-01

The National Early Childhood Technical Assistance Center was charged by the U.S. Department of Education's Office of Special Education Programs from October 2001 through September 2006 to develop, implement, and evaluate an approach to technical assistance (TA) that would result in sustainable systems change in state early intervention and…

Interdisciplinary Relationships in Technical Education: The CORD Perspective.

ERIC Educational Resources Information Center

Hull, Daniel M.

1990-01-01

The director of the Center for Occupational Research and Development (CORD) suggests areas in a technical curriculum that could be improved using an interdisciplinary approach: (1) systems; (2) the electromechanical core; (3) the mathematics/science base; (4) computers; and (5) interpersonal/communication skills. (Author)

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

Return on Postsecondary Education Investment: An Analysis of Professional and Technical Education Degrees in Idaho

ERIC Educational Resources Information Center

Midgley, Jeri S.

2012-01-01

The purpose of this ex-post facto quantitative study was to evaluate the benefits of professional technical postsecondary education in Idaho. Human capital theory formed the basis of understanding the importance of acquiring education beyond high school, both for the individual and society. Interactions between entry earnings and cost of attending…

Contract Source Selection: An Analysis of Lowest Price Technically Acceptable and Tradeoff Strategies

DTIC Science & Technology

2016-06-01

thorough market research, acquisition professionals must decide at an early stage which source selection strategy (lowest price technically...minimizing risk and ensuring best value for all stakeholders. On the basis of thorough market research, acquisition professionals must decide at an early...price-based, market -driven environment from requirements development through properly disposal. Source selection must be 8 made on a ‘best value

Shuttle ku-band communications/radar technical concepts

NASA Technical Reports Server (NTRS)

Griffin, J. W.; Kelley, J. S.; Steiner, A. W.; Vang, H. A.; Zrubek, W. E.; Huth, G. K.

1985-01-01

Technical data on the Shuttle Orbiter K sub u-band communications/radar system are presented. The more challenging aspects of the system design and development are emphasized. The technical problems encountered and the advancements made in solving them are discussed. The radar functions are presented first. Requirements and design/implementation approaches are discussed. Advanced features are explained, including Doppler measurement, frequency diversity, multiple pulse repetition frequencies and pulse widths, and multiple modes. The communications functions that are presented include advances made because of the requirements for multiple communications modes. Spread spectrum, quadrature phase shift keying (QPSK), variable bit rates, and other advanced techniques are discussed. Performance results and conclusions reached are outlined.

[In search of results of technical cooperation].

PubMed

Jourdan Hidalgo, L; Manuel Sotelo, J

1999-06-01

For the Pan American Health Organization (PAHO), technical cooperation (TC) is the process by which the PAHO Member States work with the Organization, as equal partners, to identify and reach their own health goals and to promote self-sufficiency in health development, through programs that respond to those countries' needs and national priorities. Since 1978, PAHO has used the American Regional Planning, Programming, Monitoring, and Evaluation System (AMPES) to establish management procedures and to facilitate decision-making in health TC. As part of AMPES, PAHO uses a "logical approach to project management" to structure the work program of the Organization and to identify the expected results from TC activities and TC resource investments. This project management approach, which replaces the "functional approaches" system used to date, also helps establish a causative relationship between the programmed activities and the results that PAHO expects, and between the activities and the hoped-for outcomes in the countries. As part of an ongoing process of rethinking international health TC, several years ago PAHO began a four-phase study on the usefulness and validity of functional approaches and on the need to propose new ones or to modify existing ones. The results of the initial phase showed it was difficult to classify the activities because the functional-approaches categories were not mutually exclusive and the TC activities were complex. Further, the expected results did not specify the product for which the PAHO Secretariat was accountable within a certain time frame nor the Secretariat's level of responsibility. Thus, a new and more flexible classification of expected results was proposed, with the following categories: cooperation networks and alliances; surveillance and information systems; standards and guidelines; research and evaluation studies; plans, projects, and policies; methods, models, and technologies; training programs; promotional campaigns

Security during the Construction of New Nuclear Power Plants: Technical Basis for Access Authorization and Fitness-For-Duty Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branch, Kristi M.; Baker, Kathryn A.

A technical letter report to the NRC summarizing the findings of a benchmarking study, literature review, and workshop with experts on current industry standards and expert judgments about needs for security during the construction phase of critical infrastructure facilities in the post-September 11 U.S. context, with a special focus on the construction phase of nuclear power plants and personnel security measures.

A comparison of a technical and a participatory application of social impact assessment.

Treesearch

Dennis R Becker; Charles C Harris; Erik A Nielsen; William J. McLaughlin

2004-01-01

Results of independent applications of a technical and a participatory approach to SIA are compared for an assessment of impacts of the proposed removal of hydroelectric dams to recover threatened and endangered salmon in the Pacific Northwest of the United States. The analysis focuses on empirical differences and similarities between the technical social analysis...

The VEPSY UPDATED Project: clinical rationale and technical approach.

PubMed

Riva, G; Alcãniz, M; Anolli, L; Bacchetta, M; Baños, R; Buselli, C; Beltrame, F; Botella, C; Castelnuovo, G; Cesa, G; Conti, S; Galimberti, C; Gamberini, L; Gaggioli, A; Klinger, E; Legeron, P; Mantovani, F; Mantovani, G; Molinari, E; Optale, G; Ricciardiello, L; Perpiñá, C; Roy, S; Spagnolli, A; Troiani, R; Weddle, C

2003-08-01

More than 10 years ago, Tart (1990) described virtual reality (VR) as a technological model of consciousness offering intriguing possibilities for developing diagnostic, inductive, psychotherapeutic, and training techniques that can extend and supplement current ones. To exploit and understand this potential is the overall goal of the "Telemedicine and Portable Virtual Environment in Clinical Psychology"--VEPSY UPDATED--a European Community-funded research project (IST-2000-25323, www.cybertherapy.info). Particularly, its specific goal is the development of different PC-based virtual reality modules to be used in clinical assessment and treatment of social phobia, panic disorders, male sexual disorders, obesity, and eating disorders. The paper describes the clinical and technical rationale behind the clinical applications developed by the project. Moreover, the paper focuses its analysis on the possible role of VR in clinical psychology and how it can be used for therapeutic change.

An investigation of wing buffeting response at subsonic and transonic speeds: Phase 1: F-111A flight data analysis. Volume 1: Summary of technical approach, results and conclusions

NASA Technical Reports Server (NTRS)

Benepe, D. B.; Cunningham, A. M., Jr.; Dunmyer, W. D.

1978-01-01

The structural response to aerodynamic buffet during moderate to high-g maneuvers at subsonic and transonic speeds was investigated. The investigation is reported in three volumes. This volume presents a summary of the investigation with a complete description of the technical approach, description of the aircraft, its instrumentation, the data reduction procedures, results and conclusion.

Derivation of a formula for the resonance integral for a nonorthogonal basis set

PubMed Central

Yim, Yung-Chang; Eyring, Henry

1981-01-01

In a self-consistent field calculation, a formula for the off-diagonal matrix elements of the core Hamiltonian is derived for a nonorthogonal basis set by a polyatomic approach. A set of parameters is then introduced for the repulsion integral formula of Mataga-Nishimoto to fit the experimental data. The matrix elements computed for the nonorthogonal basis set in the π-electron approximation are transformed to those for an orthogonal basis set by the Löwdin symmetrical orthogonalization. PMID:16593009

Basis adaptation and domain decomposition for steady partial differential equations with random coefficients

DOE PAGES

Tipireddy, R.; Stinis, P.; Tartakovsky, A. M.

2017-09-04

In this paper, we present a novel approach for solving steady-state stochastic partial differential equations (PDEs) with high-dimensional random parameter space. The proposed approach combines spatial domain decomposition with basis adaptation for each subdomain. The basis adaptation is used to address the curse of dimensionality by constructing an accurate low-dimensional representation of the stochastic PDE solution (probability density function and/or its leading statistical moments) in each subdomain. Restricting the basis adaptation to a specific subdomain affords finding a locally accurate solution. Then, the solutions from all of the subdomains are stitched together to provide a global solution. We support ourmore » construction with numerical experiments for a steady-state diffusion equation with a random spatially dependent coefficient. Lastly, our results show that highly accurate global solutions can be obtained with significantly reduced computational costs.« less

Bio-inspired approach to multistage image processing

NASA Astrophysics Data System (ADS)

Timchenko, Leonid I.; Pavlov, Sergii V.; Kokryatskaya, Natalia I.; Poplavska, Anna A.; Kobylyanska, Iryna M.; Burdenyuk, Iryna I.; Wójcik, Waldemar; Uvaysova, Svetlana; Orazbekov, Zhassulan; Kashaganova, Gulzhan

2017-08-01

Multistage integration of visual information in the brain allows people to respond quickly to most significant stimuli while preserving the ability to recognize small details in the image. Implementation of this principle in technical systems can lead to more efficient processing procedures. The multistage approach to image processing, described in this paper, comprises main types of cortical multistage convergence. One of these types occurs within each visual pathway and the other between the pathways. This approach maps input images into a flexible hierarchy which reflects the complexity of the image data. The procedures of temporal image decomposition and hierarchy formation are described in mathematical terms. The multistage system highlights spatial regularities, which are passed through a number of transformational levels to generate a coded representation of the image which encapsulates, in a computer manner, structure on different hierarchical levels in the image. At each processing stage a single output result is computed to allow a very quick response from the system. The result is represented as an activity pattern, which can be compared with previously computed patterns on the basis of the closest match.

Biasogram: Visualization of Confounding Technical Bias in Gene Expression Data

PubMed Central

Krzystanek, Marcin; Szallasi, Zoltan; Eklund, Aron C.

2013-01-01

Gene expression profiles of clinical cohorts can be used to identify genes that are correlated with a clinical variable of interest such as patient outcome or response to a particular drug. However, expression measurements are susceptible to technical bias caused by variation in extraneous factors such as RNA quality and array hybridization conditions. If such technical bias is correlated with the clinical variable of interest, the likelihood of identifying false positive genes is increased. Here we describe a method to visualize an expression matrix as a projection of all genes onto a plane defined by a clinical variable and a technical nuisance variable. The resulting plot indicates the extent to which each gene is correlated with the clinical variable or the technical variable. We demonstrate this method by applying it to three clinical trial microarray data sets, one of which identified genes that may have been driven by a confounding technical variable. This approach can be used as a quality control step to identify data sets that are likely to yield false positive results. PMID:23613961

A Safety Case Approach for Deep Geologic Disposal of DOE HLW and DOE SNF in Bedded Salt - 13350

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sevougian, S. David; MacKinnon, Robert J.; Leigh, Christi D.

2013-07-01

The primary objective of this study is to investigate the feasibility and utility of developing a defensible safety case for disposal of United States Department of Energy (U.S. DOE) high-level waste (HLW) and DOE spent nuclear fuel (SNF) in a conceptual deep geologic repository that is assumed to be located in a bedded salt formation of the Delaware Basin [1]. A safety case is a formal compilation of evidence, analyses, and arguments that substantiate and demonstrate the safety of a proposed or conceptual repository. We conclude that a strong initial safety case for potential licensing can be readily compiled bymore » capitalizing on the extensive technical basis that exists from prior work on the Waste Isolation Pilot Plant (WIPP), other U.S. repository development programs, and the work published through international efforts in salt repository programs such as in Germany. The potential benefits of developing a safety case include leveraging previous investments in WIPP to reduce future new repository costs, enhancing the ability to effectively plan for a repository and its licensing, and possibly expediting a schedule for a repository. A safety case will provide the necessary structure for organizing and synthesizing existing salt repository science and identifying any issues and gaps pertaining to safe disposal of DOE HLW and DOE SNF in bedded salt. The safety case synthesis will help DOE to plan its future R and D activities for investigating salt disposal using a risk-informed approach that prioritizes test activities that include laboratory, field, and underground investigations. It should be emphasized that the DOE has not made any decisions regarding the disposition of DOE HLW and DOE SNF. Furthermore, the safety case discussed herein is not intended to either site a repository in the Delaware Basin or preclude siting in other media at other locations. Rather, this study simply presents an approach for accelerated development of a safety case for a

Australian Business Graduates' Perceptions of Non-Technical Skills within the Workplace

ERIC Educational Resources Information Center

Roepen, Dean

2017-01-01

Purpose: The purpose of this paper is to explore non-technical skills from the perspective of Australian business graduates who had recently made the transition from higher education into full-time employment. Design/methodology/approach: A mixed-methods approach was applied through the use of an online survey containing closed and open-ended…

Recreational technical diving part 1: an introduction to technical diving methods and activities.

PubMed

Mitchell, Simon J; Doolette, David J

2013-06-01

Technical divers use gases other than air and advanced equipment configurations to conduct dives that are deeper and/or longer than typical recreational air dives. The use of oxygen-nitrogen (nitrox) mixes with oxygen fractions higher than air results in longer no-decompression limits for shallow diving, and faster decompression from deeper dives. For depths beyond the air-diving range, technical divers mix helium, a light non-narcotic gas, with nitrogen and oxygen to produce 'trimix'. These blends are tailored to the depth of intended use with a fraction of oxygen calculated to produce an inspired oxygen partial pressure unlikely to cause cerebral oxygen toxicity and a nitrogen fraction calculated to produce a tolerable degree of nitrogen narcosis. A typical deep technical dive will involve the use of trimix at the target depth with changes to gases containing more oxygen and less inert gas during the decompression. Open-circuit scuba may be used to carry and utilise such gases, but this is very wasteful of expensive helium. There is increasing use of closed-circuit 'rebreather' devices. These recycle expired gas and potentially limit gas consumption to a small amount of inert gas to maintain the volume of the breathing circuit during descent and the amount of oxygen metabolised by the diver. This paper reviews the basic approach to planning and execution of dives using these methods to better inform physicians of the physical demands and risks.

The Physics Basis of ITER Confinement

NASA Astrophysics Data System (ADS)

Wagner, F.

2009-02-01

ITER will be the first fusion reactor and the 50 year old dream of fusion scientists will become reality. The quality of magnetic confinement will decide about the success of ITER, directly in the form of the confinement time and indirectly because it decides about the plasma parameters and the fluxes, which cross the separatrix and have to be handled externally by technical means. This lecture portrays some of the basic principles which govern plasma confinement, uses dimensionless scaling to set the limits for the predictions for ITER, an approach which also shows the limitations of the predictions, and describes briefly the major characteristics and physics behind the H-mode—the preferred confinement regime of ITER.

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

PubMed

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Risk assessments for mixtures: technical methods commonly used in the United States

EPA Science Inventory

A brief (20 minute) talk on the technical approaches used by EPA and other US agencies to assess risks posed by combined exposures to one or more chemicals. The talk systemically reviews the methodologies (whole-mixtures and component-based approaches) that are or have been used ...

1976-1977 Johnson-O'Malley Technical Assistance Handbook.

ERIC Educational Resources Information Center

Leonard, Terry

Designed to provide a practical approach to the rules and regulations governing implementation of the American Indian Self-Determination and Education Assistance Act (PL 93-638) in conjunction with the Johnson-O'Malley Act (JOM), this technical assistance handbook is written in comic book style. Using straightforward language, this manual…

26 CFR 1.1014-4 - Uniformity of basis; adjustment to basis.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) INCOME TAX (CONTINUED) INCOME TAXES Basis Rules of General Application § 1.1014-4 Uniformity of basis... to property acquired by bequest, devise, or inheritance relate back to the death of the decedent... prescribing a general uniform basis rule for property acquired from a decedent is, on the one hand, to tax the...

The Basis System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubois, P.F.

1989-05-16

This paper discusses the basis system. Basis is a program development system for scientific programs. It has been developed over the last five years at Lawrence Livermore National Laboratory (LLNL), where it is now used in about twenty major programming efforts. The Basis System includes two major components, a program development system and a run-time package. The run-time package provides the Basis Language interpreter, through which the user does input, output, plotting, and control of the program's subroutines and functions. Variables in the scientific packages are known to this interpreter, so that the user may arbitrarily print, plot, and calculatemore » with, any major program variables. Also provided are facilities for dynamic memory management, terminal logs, error recovery, text-file i/o, and the attachment of non-Basis-developed packages.« less

Decision Support System for Aquifer Recharge (AR) and Aquifer Storage and Recovery (ASR) Planning, Design, and Evaluation - Principles and Technical Basis

EPA Science Inventory

Aquifer recharge (AR) is a technical method being utilized to enhance groundwater resources through man-made replenishment means, such as infiltration basins and injections wells. Aquifer storage and recovery (ASR) furthers the AR techniques by withdrawal of stored groundwater at...

Creating technical heritage object replicas in a virtual environment

NASA Astrophysics Data System (ADS)

Egorova, Olga; Shcherbinin, Dmitry

2016-03-01

The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of learning is achieved while promoting the preservation of the replicas for future generations. Modern approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.

Identification of mine rescue equipment reduction gears technical condition

NASA Astrophysics Data System (ADS)

Gerike, B. L.; Klishin, V. I.; Kuzin, E. G.

2017-09-01

The article presents the reasons for adopting intelligent service of mine belt conveyer drives concerning evaluation of their technical condition based on the diagnostic techniques instead of regular preventative maintenance. The article reveals the diagnostic results of belt conveyer drive reduction gears condition taking into account the parameters of lubricating oil, vibration and temperature. Usage of a complex approach to evaluate technical conditions allows reliability of the forecast to be improved, which makes it possible not only to prevent accidental breakdowns and eliminate unscheduled downtime, but also to bring sufficient economic benefits through reduction of the term and scope of work during overhauls.

Facilitating Service Learning in the Online Technical Communication Classroom

ERIC Educational Resources Information Center

Nielsen, Danielle

2016-01-01

Drawing from the author's experience teaching online technical communication courses with an embedded service-learning component, this essay opens the discussion to the potential problems involved in designing online service-learning courses and provides practical approaches to integrating service learning into online coursework. The essay…

A technical platform for environments for ageing--lessons learned from three field studies.

PubMed

Eichelberg, Marco; Büsching, Felix; Steen, Enno-Edzard; Helmer, Axel; Thiel, Andreas; Hein, Andreas; Wolf, Lars

2014-01-01

The Lower Saxony Research Network "Design of Environments for Ageing" (GAL) studied possible applications of assistive technology for enabling older adults to live longer and independent in their own home. As part of this work, a technical platform was developed as a common technical basis for all assistive systems in the project. This article presents an overview of the architecture and core functionality of the technical platform, which in the first generation was developed for use in a laboratory setting, and in a second generation was extended for use in the project's field studies, i.e. prototype installations in end-users homes. The field studies' primary objective was the evaluation of the assistive technologies, that were developed within the overall project. However, these studies also confirmed that the fundamental concept of the technical platform is valid, and the prototypes continuously worked 24 h a day for several months. However, there were some problems related to lack of infrastructure in the older adults' homes and human factors such as inadvertent placement of objects across sensors' field of view, acceptance problems due to aesthetical reasons or simply communication problems, which show that making complex technologies work for users with little technical experience is well possible, but requires a careful consideration of the complete service chain and related "soft factors".

Producing Scientific and Strategic Guidance for California's Department of Water Resources: The Climate Change Technical Advisory Group

NASA Astrophysics Data System (ADS)

Gyakum, J. R.; Austin, B. N.; Curtis, D. C.; Anderson, M.; Alpert, H.; Young, S.; Herson, A.; Schwarz, A.; Kavvas, M. L.; Langridge, R.; Lynn, E.; Anderson, J.; Redmond, K. T.; Dettinger, M. D.; Correa, M.; Franco, G.; Cayan, D.; Georgakakos, K.

2015-12-01

Diverse areas of expertise are needed to describe and assess a changing climate and provide guidance for the agency that runs the largest state-built, multi-purpose water project in the U.S. California's State Water Project provides: drinking water for more than 25 million people, flood control, power generation, recreation, fish and wildlife protection, and water quality improvements. Hydrologic impacts under a changing climate include rising seas, reduced ratio of snow to rain, earlier snowmelt and higher temperatures; all of which are being detected. To improve the scientific basis for decisions and enhance the consistency of climate change approaches, the California Department of Water Resources (DWR) empaneled a Climate Change Technical Advisory Group (CCTAG) for guidance on the scientific aspects of climate change, its impacts on water resources, the use and creation of planning approaches and analytical tools, and the development of adaptation responses. To carry out DWR's mission, incorporation of climate change into DWR's planning, projects, and other activities must be consistent, science-based, and continually improved through an iterative process. Hydrologists, academicians, modelers, planners, lawyers and practitioners convened regularly to tackle these complicated issues in water management policy, including climate change impacts on extreme events. Actions taken in response to the CCTAG recommendations will move California toward more sustainable management of water and related resources. DWR will release a technical report of CCTAG guidance and perspectives in 2015. The process to convene, collaborate and distribute the findings of this CCTAG will be the focus of this presentation. An academician and water resources practitioner will share their perspectives on the processes driving CCTAG's work.

Quality assurance of technical specification approval process

NASA Astrophysics Data System (ADS)

Antsev, V. Yu; Antseva, N. V.; Chernecova, E. A.

2018-03-01

The paper reviews the issue of increasing the efficiency of contract analysis on machine-building plants in accordance with process approach principles and on the basis of better interaction between marketing, finance and accounting, and R&D departments.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eggeman, Tim; O'Neill, Brian

2016-08-17

ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was alreadymore » in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive

Tracing Staphylococcus aureus in small and medium-sized food-processing factories on the basis of molecular sub-species typing.

PubMed

Koreňová, Janka; Rešková, Zuzana; Véghová, Adriana; Kuchta, Tomáš

2015-01-01

Contamination by Staphylococcus aureus of the production environment of three small or medium-sized food-processing factories in Slovakia was investigated on the basis of sub-species molecular identification by multiple locus variable number of tandem repeats analysis (MLVA). On the basis of MLVA profiling, bacterial isolates were assigned to 31 groups. Data from repeated samplings over a period of 3 years facilitated to draw spatial and temporal maps of the contamination routes for individual factories, as well as identification of potential persistent strains. Information obtained by MLVA typing allowed to identify sources and routes of contamination and, subsequently, will allow to optimize the technical and sanitation measures to ensure hygiene.

76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29, 2011, from 1 p.m. to 5 p.m. and... System. The conference will explore the progress made on the priorities for addressing risks to...

Role of medical, technical, and administrative leadership in the human resource management life cycle: a team approach to laboratory management.

PubMed

Wilkinson, D S; Dilts, T J

1999-01-01

We believe the team approach to laboratory management achieves the best outcomes. Laboratory management requires the integration of medical, technical, and administrative expertise to achieve optimal service, quality, and cost performance. Usually, a management team of two or more individuals must be assembled to achieve all of these critical leadership functions. The individual members of the management team must possess the requisite expertise in clinical medicine, laboratory science, technology management, and administration. They also must work together in a unified and collaborative manner, regardless of where individual team members appear on the organizational chart. The management team members share in executing the entire human resource management life cycle, creating the proper environment to maximize human performance. Above all, the management team provides visionary and credible leadership.

Examining the Role of Transformational Leadership in Technology Adoption: Evidence from Bruneian Technical & Vocational Establishments (TVE)

ERIC Educational Resources Information Center

Seyal, Afzaal H.

2015-01-01

This pioneering study discusses the thirty-five Bruneian technical & vocational institutions of top management (principals, deputy principals, senior masters, ICT coordinators and technical administrators) leadership style with the adoption of Information and Communication Technologies (ICT). The study uses a survey approach further to…

Addressing the social dimensions of citizen observatories: The Ground Truth 2.0 socio-technical approach for sustainable implementation of citizen observatories

NASA Astrophysics Data System (ADS)

Wehn, Uta; Joshi, Somya; Pfeiffer, Ellen; Anema, Kim; Gharesifard, Mohammad; Momani, Abeer

2017-04-01

Owing to ICT-enabled citizen observatories, citizens can take on new roles in environmental monitoring, decision making and co-operative planning, and environmental stewardship. And yet implementing advanced citizen observatories for data collection, knowledge exchange and interactions to support policy objectives is neither always easy nor successful, given the required commitment, trust, and data reliability concerns. Many efforts are facing problems with the uptake and sustained engagement by citizens, limited scalability, unclear long-term sustainability and limited actual impact on governance processes. Similarly, to sustain the engagement of decision makers in citizen observatories, mechanisms are required from the start of the initiative in order to have them invest in and, hence, commit to and own the entire process. In order to implement sustainable citizen observatories, these social dimensions therefore need to be soundly managed. We provide empirical evidence of how the social dimensions of citizen observatories are being addressed in the Ground Truth 2.0 project, drawing on a range of relevant social science approaches. This project combines the social dimensions of citizen observatories with enabling technologies - via a socio-technical approach - so that their customisation and deployment is tailored to the envisaged societal and economic impacts of the observatories. The projects consists of the demonstration and validation of six scaled up citizen observatories in real operational conditions both in the EU and in Africa, with a specific focus on flora and fauna as well as water availability and water quality for land and natural resources management. The demonstration cases (4 EU and 2 African) cover the full 'spectrum' of citizen-sensed data usage and citizen engagement, and therefore allow testing and validation of the socio-technical concept for citizen observatories under a range of conditions.

Generalizing the self-healing diffusion Monte Carlo approach to finite temperature: a path for the optimization of low-energy many-body basis expansions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jeongnim; Reboredo, Fernando A.

The self-healing diffusion Monte Carlo method for complex functions [F. A. Reboredo J. Chem. Phys. {\\bf 136}, 204101 (2012)] and some ideas of the correlation function Monte Carlo approach [D. M. Ceperley and B. Bernu, J. Chem. Phys. {\\bf 89}, 6316 (1988)] are blended to obtain a method for the calculation of thermodynamic properties of many-body systems at low temperatures. In order to allow the evolution in imaginary time to describe the density matrix, we remove the fixed-node restriction using complex antisymmetric trial wave functions. A statistical method is derived for the calculation of finite temperature properties of many-body systemsmore » near the ground state. In the process we also obtain a parallel algorithm that optimizes the many-body basis of a small subspace of the many-body Hilbert space. This small subspace is optimized to have maximum overlap with the one expanded by the lower energy eigenstates of a many-body Hamiltonian. We show in a model system that the Helmholtz free energy is minimized within this subspace as the iteration number increases. We show that the subspace expanded by the small basis systematically converges towards the subspace expanded by the lowest energy eigenstates. Possible applications of this method to calculate the thermodynamic properties of many-body systems near the ground state are discussed. The resulting basis can be also used to accelerate the calculation of the ground or excited states with Quantum Monte Carlo.« less

Basis adaptation and domain decomposition for steady-state partial differential equations with random coefficients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tipireddy, R.; Stinis, P.; Tartakovsky, A. M.

We present a novel approach for solving steady-state stochastic partial differential equations (PDEs) with high-dimensional random parameter space. The proposed approach combines spatial domain decomposition with basis adaptation for each subdomain. The basis adaptation is used to address the curse of dimensionality by constructing an accurate low-dimensional representation of the stochastic PDE solution (probability density function and/or its leading statistical moments) in each subdomain. Restricting the basis adaptation to a specific subdomain affords finding a locally accurate solution. Then, the solutions from all of the subdomains are stitched together to provide a global solution. We support our construction with numericalmore » experiments for a steady-state diffusion equation with a random spatially dependent coefficient. Our results show that highly accurate global solutions can be obtained with significantly reduced computational costs.« less

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

Technical assistance and the transfer of remote sensing technology. [for economic development

NASA Technical Reports Server (NTRS)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

CERA - the technical basis for WDCC

NASA Astrophysics Data System (ADS)

Thiemann, Hannes; Lautenschlager, Michael

2010-05-01

The World Data Centre for Climate (WDCC) is hosted by the German Climate Computing Centre (DKRZ). It collects, stores and disseminates data for climate research in order to serve the scientific community. Emphasis hereby is spent on climate modelling and related data products. CERA (Climate and environmental retrieval and archive) is the infrastructure hosting data and metadata from WDCC. Data originates from projects like IPCC (and IPCC-DDC), ENSEMBLES, COPS and several others. Currently more than 400 terabytes of data are managed within CERA. Even more data is addressed through metadata. Data stored inline in CERA is currently archived in an Oracle Database which itself is transparently linked to a sophisticated HSM system. Within this HSM system a wide range of storage systems like different RAID and tape devices are used. HSM for CERA is configured in such a way, that a unique media failure may not cause any data loss. Correct and complete metadata are an important ingredient for relevant archiving procedures. Within CERA special care is taken to assure these goals. As a high end service DOIs can be assigned to data entities as they make the management of intellectual property easier and more convenient. Any data format can be served from within CERA although most of the data stored in CERA is in either GRIB or netCDF format. Out of the box CERA provides several data reduction mechanisms like time-slicing or regional selection. More elaborate functions like format conversion or diverse processing is attached either in- our outline. Fine-grained access control allows data to be distributed under divers data policies. Currently up to 800 users are registered within CERA. More than 600.000 downloads (255 terabytes) have been served from CERA within 2009. At present CERA is restructured, more specific details of the current implementation and the future development will be given in the presentation.

Workplace Skills in Practice. Case Studies of Technical Work.

ERIC Educational Resources Information Center

Stasz, Cathleen; And Others

A study was conducted to explore skills and work-related dispositions in technical work. It used a sociocultural approach to examine skills in seven target jobs in worksites representing diverse industries--health care, traffic management, transportation, and semiconductor manufacturing. It explored employers' strategies for obtaining the skills…

How to develop and write a case for technical writing

NASA Technical Reports Server (NTRS)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

Calculating vibrational spectra with sum of product basis functions without storing full-dimensional vectors or matrices.

PubMed

Leclerc, Arnaud; Carrington, Tucker

2014-05-07

We propose an iterative method for computing vibrational spectra that significantly reduces the memory cost of calculations. It uses a direct product primitive basis, but does not require storing vectors with as many components as there are product basis functions. Wavefunctions are represented in a basis each of whose functions is a sum of products (SOP) and the factorizable structure of the Hamiltonian is exploited. If the factors of the SOP basis functions are properly chosen, wavefunctions are linear combinations of a small number of SOP basis functions. The SOP basis functions are generated using a shifted block power method. The factors are refined with a rank reduction algorithm to cap the number of terms in a SOP basis function. The ideas are tested on a 20-D model Hamiltonian and a realistic CH3CN (12 dimensional) potential. For the 20-D problem, to use a standard direct product iterative approach one would need to store vectors with about 10(20) components and would hence require about 8 × 10(11) GB. With the approach of this paper only 1 GB of memory is necessary. Results for CH3CN agree well with those of a previous calculation on the same potential.

NOTES: a review of the technical problems encountered and their solutions.

PubMed

Mintz, Yoav; Horgan, Santiago; Cullen, John; Stuart, David; Falor, Eric; Talamini, Mark A

2008-08-01

Natural orifice translumenal endoscopic surgery (NOTES) is currently investigated and developed worldwide. In the past few years, multiple groups have confronted this challenge. Many technical problems are encountered in this technique due to the currently available tools for this approach. Some of the unique technical problems in NOTES include: blindly performed primary incisions; uncontrolled pneumoperitoneal pressure; no support for the endoscope in the abdominal cavity; inadequate vision; insufficient illumination; limited retraction and exposure; and the complexity of suturing and performing a safe anastomosis. In this paper, we review the problems encountered in NOTES and provide possible temporary solutions. Acute and survival studies were performed on 15 farm pigs. The hybrid technique approach (i.e., endoscopic surgery with the aid of laparoscopic vision) was performed in all cases. Procedures performed included liver biopsies, bilateral tubal ligation, oophprectomy, cholecystectomy, splenectomy and small bowel resection, and anastomosis. All attempted procedures were successfully performed. New methods and techniques were developed to overcome the technical problems. Closure of the gastrotomy was achieved by T-bar sutures and by stapler closure of the stomach incision. Small bowel anastomosis was achieved by the dual-lumen NOTES technique. The hybrid technique serves as a temporary approach to aid in developing the NOTES technique. A rectal or vaginal port of entry enables and facilitates gastrointestinal NOTES by using available laparoscopic instruments. The common operations performed today in the laparoscopic fashion could be probably performed in the NOTES approach. The safety of these procedures, however, is yet to be determined.

SWRL Music Program: Ethnic Song Selection and Distribution. Technical Note.

ERIC Educational Resources Information Center

Williams, David Brian

Current elementary music education approaches to the distribution and selection of ethnic folk song in music programs are surveyed and each approach is reviewed on the basis of its utility for the Southwest Regional Laboratory Music Program. The first approach, a traditional point of view, is based on the premise that music education has a…

Polyatomic molecular Dirac-Hartree-Fock calculations with Gaussian basis sets

NASA Technical Reports Server (NTRS)

Dyall, Kenneth G.; Faegri, Knut, Jr.; Taylor, Peter R.

1990-01-01

Numerical methods have been used successfully in atomic Dirac-Hartree-Fock (DHF) calculations for many years. Some DHF calculations using numerical methods have been done on diatomic molecules, but while these serve a useful purpose for calibration, the computational effort in extending this approach to polyatomic molecules is prohibitive. An alternative more in line with traditional quantum chemistry is to use an analytical basis set expansion of the wave function. This approach fell into disrepute in the early 1980's due to problems with variational collapse and intruder states, but has recently been put on firm theoretical foundations. In particular, the problems of variational collapse are well understood, and prescriptions for avoiding the most serious failures have been developed. Consequently, it is now possible to develop reliable molecular programs using basis set methods. This paper describes such a program and reports results of test calculations to demonstrate the convergence and stability of the method.

Charles Morris's Semiotic Model and Analytical Studies of Visual and Verbal Representations in Technical Communication

ERIC Educational Resources Information Center

Fan, Jiang-Ping

2006-01-01

In this article, the author demonstrates that the semiotic model proposed by Charles Morris enables us to optimize our understanding of technical communication practices and provides a good point of inquiry. To illustrate this point, the author exemplifies the semiotic approaches by scholars in technical communication and elaborates Morris's model…

Framework conditions and requirements to ensure the technical functional safety of reprocessed medical devices.

PubMed

Kraft, Marc

2008-09-03

Testing and restoring technical-functional safety is an essential part of medical device reprocessing. Technical functional tests have to be carried out on the medical device in the course of the validation of reprocessing procedures. These ensure (in addition to the hygiene tests) that the reprocessing procedure is suitable for the medical device. Functional tests are, however, also a part of reprocessing procedures. As a stage in the reprocessing, they ensure for the individual medical device that no damage or other changes limit the performance. When determining which technical-functional tests are to be carried out, the current technological standard has to be taken into account in the form of product-specific and process-oriented norms. Product-specific norms primarily define safety-relevant requirements. The risk management method described in DIN EN ISO 14971 is the basis for recognising hazards; the likelihood of such hazards arising can be minimised through additional technical-functional tests, which may not yet have been standardised. Risk management is part of a quality management system, which must be bindingly certified for manufacturers and processors of critical medical devices with particularly high processing demands by a body accredited by the competent authority.

Framework conditions and requirements to ensure the technical functional safety of reprocessed medical devices

PubMed Central

Kraft, Marc

2008-01-01

Testing and restoring technical-functional safety is an essential part of medical device reprocessing. Technical functional tests have to be carried out on the medical device in the course of the validation of reprocessing procedures. These ensure (in addition to the hygiene tests) that the reprocessing procedure is suitable for the medical device. Functional tests are, however, also a part of reprocessing procedures. As a stage in the reprocessing, they ensure for the individual medical device that no damage or other changes limit the performance. When determining which technical-functional tests are to be carried out, the current technological standard has to be taken into account in the form of product-specific and process-oriented norms. Product-specific norms primarily define safety-relevant requirements. The risk management method described in DIN EN ISO 14971 is the basis for recognising hazards; the likelihood of such hazards arising can be minimised through additional technical-functional tests, which may not yet have been standardised. Risk management is part of a quality management system, which must be bindingly certified for manufacturers and processors of critical medical devices with particularly high processing demands by a body accredited by the competent authority. PMID:20204095

A T Matrix Method Based upon Scalar Basis Functions

NASA Technical Reports Server (NTRS)

Mackowski, D.W.; Kahnert, F. M.; Mishchenko, Michael I.

2013-01-01

A surface integral formulation is developed for the T matrix of a homogenous and isotropic particle of arbitrary shape, which employs scalar basis functions represented by the translation matrix elements of the vector spherical wave functions. The formulation begins with the volume integral equation for scattering by the particle, which is transformed so that the vector and dyadic components in the equation are replaced with associated dipole and multipole level scalar harmonic wave functions. The approach leads to a volume integral formulation for the T matrix, which can be extended, by use of Green's identities, to the surface integral formulation. The result is shown to be equivalent to the traditional surface integral formulas based on the VSWF basis.

Mechanistic approach to generalized technical analysis of share prices and stock market indices

NASA Astrophysics Data System (ADS)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

TECHNICAL REPORTS DATABASE

EPA Science Inventory

The Defense Technical Information Center (DTIC?) is the central facility for the collection and dissemination of scientific and technical information for the Department of Defense (DoD). Much of this information is made available by DTIC in the form of technical reports about com...

Approach for validating actinide and fission product compositions for burnup credit criticality safety analyses

DOE PAGES

Radulescu, Georgeta; Gauld, Ian C.; Ilas, Germina; ...

2014-11-01

This paper describes a depletion code validation approach for criticality safety analysis using burnup credit for actinide and fission product nuclides in spent nuclear fuel (SNF) compositions. The technical basis for determining the uncertainties in the calculated nuclide concentrations is comparison of calculations to available measurements obtained from destructive radiochemical assay of SNF samples. Probability distributions developed for the uncertainties in the calculated nuclide concentrations were applied to the SNF compositions of a criticality safety analysis model by the use of a Monte Carlo uncertainty sampling method to determine bias and bias uncertainty in effective neutron multiplication factor. Application ofmore » the Monte Carlo uncertainty sampling approach is demonstrated for representative criticality safety analysis models of pressurized water reactor spent fuel pool storage racks and transportation packages using burnup-dependent nuclide concentrations calculated with SCALE 6.1 and the ENDF/B-VII nuclear data. Furthermore, the validation approach and results support a recent revision of the U.S. Nuclear Regulatory Commission Interim Staff Guidance 8.« less

Straightening the Hierarchical Staircase for Basis Set Extrapolations: A Low-Cost Approach to High-Accuracy Computational Chemistry

NASA Astrophysics Data System (ADS)

Varandas, António J. C.

2018-04-01

Because the one-electron basis set limit is difficult to reach in correlated post-Hartree-Fock ab initio calculations, the low-cost route of using methods that extrapolate to the estimated basis set limit attracts immediate interest. The situation is somewhat more satisfactory at the Hartree-Fock level because numerical calculation of the energy is often affordable at nearly converged basis set levels. Still, extrapolation schemes for the Hartree-Fock energy are addressed here, although the focus is on the more slowly convergent and computationally demanding correlation energy. Because they are frequently based on the gold-standard coupled-cluster theory with single, double, and perturbative triple excitations [CCSD(T)], correlated calculations are often affordable only with the smallest basis sets, and hence single-level extrapolations from one raw energy could attain maximum usefulness. This possibility is examined. Whenever possible, this review uses raw data from second-order Møller-Plesset perturbation theory, as well as CCSD, CCSD(T), and multireference configuration interaction methods. Inescapably, the emphasis is on work done by the author's research group. Certain issues in need of further research or review are pinpointed.

Analysis of nonintervention studies: technical supplement.

PubMed

Aickin, Mikel

2012-01-01

Methods for analyzing data in nonintervention clinical studies are substantially different from those that are appropriate for randomized clinical trials. Although the latter methods are well known, the former are not. A systematic approach for dealing with statistical confounding in nonintervention research has been developed over the past 30 to 40 years, and the essence of this theory constitutes the contents of this article. An accompanying, less technical article explains the implications of these results for clinical research.

Does Satisfaction Reflect the Technical Quality of Mental Health Care?

PubMed Central

Edlund, Mark J; Young, Alexander S; Kung, Fuan Yue; Sherbourne, Cathy D; Wells, Kenneth B

2003-01-01

Objective To analyze the relationship between satisfaction and technical quality of care for common mental disorders. Data Source A nationally representative telephone survey of 9,585 individuals conducted in 1997–1998. Study Design Using multinomial logistic regression techniques we investigated the association between a five-level measure of satisfaction with the mental health care available for personal or emotional problems and two quality indicators. The first measure, appropriate technical quality, was defined as use of either appropriate counseling or psychotropic medications during the prior year for a probable depressive or anxiety disorder. The second, active treatment, indicated whether the respondent had received treatment for a psychiatric disorder in the past year. Covariates included measures of physical and mental health and sociodemographic indicators. Principal Findings Appropriate technical quality of care was significantly associated with higher levels of satisfaction. The strength of the association was moderate. Conclusions Satisfaction is associated with technical quality of care. However, profiling quality of care with satisfaction will likely require large samples and case-mix adjustment, which may be more difficult for plans or provider groups to implement than measuring technical indicators. More importantly, satisfaction is not the same as technical quality, and our results suggest that at this time they cannot be made to approach each other closely enough to eliminate either. PMID:12785565

A Study of the Educational and Manpower Needs of the Catawba Valley Technical Institute Impact Area.

ERIC Educational Resources Information Center

Sumerell, Craven H.

The purpose of this study was to make a survey of the educational needs of the community served by the Catawba Valley Technical Institute (CVTI), the results of which would serve as a basis for the projection, planning, and revision of the CVTI instructional programs and the planning of physical facilities. In this cooperative venture, the data…

Theoretical Aspects of the Patterns Recognition Statistical Theory Used for Developing the Diagnosis Algorithms for Complicated Technical Systems

NASA Astrophysics Data System (ADS)

Obozov, A. A.; Serpik, I. N.; Mihalchenko, G. S.; Fedyaeva, G. A.

2017-01-01

In the article, the problem of application of the pattern recognition (a relatively young area of engineering cybernetics) for analysis of complicated technical systems is examined. It is shown that the application of a statistical approach for hard distinguishable situations could be the most effective. The different recognition algorithms are based on Bayes approach, which estimates posteriori probabilities of a certain event and an assumed error. Application of the statistical approach to pattern recognition is possible for solving the problem of technical diagnosis complicated systems and particularly big powered marine diesel engines.

Molecular basis of glyphosate resistance: Different approaches through protein engineering

PubMed Central

Pollegioni, Loredano; Schonbrunn, Ernst; Siehl, Daniel

2011-01-01

Glyphosate (N-phosphonomethyl-glycine) is the most-used herbicide in the world: glyphosate-based formulations exhibit broad-spectrum herbicidal activity with minimal human and environmental toxicity. The extraordinary success of this simple small molecule is mainly due to the high specificity of glyphosate towards the plant enzyme enolpyruvylshikimate-3-phosphate synthase in the shikimate pathway leading to biosynthesis of aromatic amino acids. Starting in 1996, transgenic glyphosate-resistant plants were introduced thus allowing the application of the herbicide to the crop (post-emergence) to remove emerged weeds without crop damage. This review focuses on the evolution of mechanisms of resistance to glyphosate as obtained through natural diversity, the gene shuffling approach to molecular evolution, and a rational, structure-based approach to protein engineering. In addition, we offer rationale for the means by which the modifications made have had their intended effect. PMID:21668647

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP AUTOMOTIVE REPAIR SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP METAL FINISHING SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

Bridging the Gap Between the Social and the Technical: The Enrolment of Socio-Technical Information Architects to Cope with the Two-Level Model of EPR Systems.

PubMed

Pedersen, Rune

2017-01-01

This is a project proposal derived from an urge to re-define the governance of ICT in healthcare towards regional and national standardization of the patient pathways. The focus is on a two-levelled approach for governing EPR systems where the clinicians' model structured variables and patient pathways. The overall goal is a patient centric EPR portfolio. This paper define and enlighten the need for establishing the socio- technical architect role necessary to obtain the capabilities of a modern structured EPR system. Clinicians are not capable to moderate between the technical and the clinical.

Fibrin sheaths in central venous port catheters: treatment with low-dose, single injection of urokinase on an outpatient basis.

PubMed

Chang, De-Hua; Mammadov, Kamal; Hickethier, Tilman; Borggrefe, Jan; Hellmich, Martin; Maintz, David; Kabbasch, Christoph

2017-01-01

Evaluation of the efficacy of single-shot, low-dose urokinase administration for the treatment of port catheter-associated fibrin sheaths. Forty-six patients were retrospectively evaluated for 54 episodes of port catheter dysfunction. The presence of a fibrin sheath was detected by angiographic contrast examinations. On an outpatient basis, patients subsequently received thrombolysis consisting of a single injection of urokinase (15.000 IU in 1.5 mL normal saline) through the port system. A second attempt was made in cases of treatment failure. Patients were followed up for technical success, complications and long-term outcome. Port dysfunction occurred at a median of 117 days after implantation (range: 7-825 days). The technical success after first port dysfunction by thrombolysis was 87% (40/46); thereof, initial thrombolysis was effective in 78% (36/46). Nine patients (20%) received a second dose of urokinase after previous treatment failure. Follow-up was available for 26 of 40 patients after successful thrombolysis. In 8 of these, rethrombosis occurred after a median of 98 days (range: 21-354 days), whereby rethrombolysis was effective in 5 of 7 (63%) patients. The overall success of all thrombolyses performed was 70% (45/64). No procedure-related technical or clinical complications occurred. After first favorable thrombolysis, a Kaplan-Meier analysis yielded a 30-, 90- and 180-day probability of patency of 96%, 87% and 81%. Thrombolytic therapy on an outpatient basis appears to be a safe and efficient. Three-month patency rates are comparable to more invasive treatment options, including catheter exchange over a guide wire and percutaneous fibrin sheath stripping.

Successful technical trading agents using genetic programming.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Othling, Andrew S.; Kelly, John A.; Pryor, Richard J.

2004-10-01

Genetic programming (GP) has proved to be a highly versatile and useful tool for identifying relationships in data for which a more precise theoretical construct is unavailable. In this project, we use a GP search to develop trading strategies for agent based economic models. These strategies use stock prices and technical indicators, such as the moving average convergence/divergence and various exponentially weighted moving averages, to generate buy and sell signals. We analyze the effect of complexity constraints on the strategies as well as the relative performance of various indicators. We also present innovations in the classical genetic programming algorithm thatmore » appear to improve convergence for this problem. Technical strategies developed by our GP algorithm can be used to control the behavior of agents in economic simulation packages, such as ASPEN-D, adding variety to the current market fundamentals approach. The exploitation of arbitrage opportunities by technical analysts may help increase the efficiency of the simulated stock market, as it does in the real world. By improving the behavior of simulated stock markets, we can better estimate the effects of shocks to the economy due to terrorism or natural disasters.« less

American Studies and the Technical Curriculum: Man and Technology.

ERIC Educational Resources Information Center

St. Germain, Amos

An approach to teaching American studies at a Southern institute of engineering technology is described. The curriculum of this school is technically oriented to the professional engineer. Elective humanities courses must attract their own market and justify their places to both the students and the faculty. Two courses entitled "Man and…

Two-step superresolution approach for surveillance face image through radial basis function-partial least squares regression and locality-induced sparse representation

NASA Astrophysics Data System (ADS)

Jiang, Junjun; Hu, Ruimin; Han, Zhen; Wang, Zhongyuan; Chen, Jun

2013-10-01

Face superresolution (SR), or face hallucination, refers to the technique of generating a high-resolution (HR) face image from a low-resolution (LR) one with the help of a set of training examples. It aims at transcending the limitations of electronic imaging systems. Applications of face SR include video surveillance, in which the individual of interest is often far from cameras. A two-step method is proposed to infer a high-quality and HR face image from a low-quality and LR observation. First, we establish the nonlinear relationship between LR face images and HR ones, according to radial basis function and partial least squares (RBF-PLS) regression, to transform the LR face into the global face space. Then, a locality-induced sparse representation (LiSR) approach is presented to enhance the local facial details once all the global faces for each LR training face are constructed. A comparison of some state-of-the-art SR methods shows the superiority of the proposed two-step approach, RBF-PLS global face regression followed by LiSR-based local patch reconstruction. Experiments also demonstrate the effectiveness under both simulation conditions and some real conditions.

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

Legitimizing Technical Communication in English Departments: Carolyn Miller's "Humanistic Rationale for Technical Writing"

ERIC Educational Resources Information Center

Moore, Patrick

2006-01-01

Carolyn Miller's oft-cited "Humanistic Rationale for Technical Writing," published in 1979, tries to give technical communication faculty more cultural capital in English departments controlled by literature professors. Miller replaces a positivistic emphasis in technical communication pedagogy with rhetoric. She shows how technical knowledge is…

Technical Failure of MR Elastography Examinations of the Liver: Experience from a Large Single-Center Study.

PubMed

Wagner, Mathilde; Corcuera-Solano, Idoia; Lo, Grace; Esses, Steven; Liao, Joseph; Besa, Cecilia; Chen, Nelson; Abraham, Ginu; Fung, Maggie; Babb, James S; Ehman, Richard L; Taouli, Bachir

2017-08-01

Purpose To assess the determinants of technical failure of magnetic resonance (MR) elastography of the liver in a large single-center study. Materials and Methods This retrospective study was approved by the institutional review board. Seven hundred eighty-one MR elastography examinations performed in 691 consecutive patients (mean age, 58 years; male patients, 434 [62.8%]) in a single center between June 2013 and August 2014 were retrospectively evaluated. MR elastography was performed at 3.0 T (n = 443) or 1.5 T (n = 338) by using a gradient-recalled-echo pulse sequence. MR elastography and anatomic image analysis were performed by two observers. Additional observers measured liver T2* and fat fraction. Technical failure was defined as no pixel value with a confidence index higher than 95% and/or no apparent shear waves imaged. Logistic regression analysis was performed to assess potential predictive factors of technical failure of MR elastography. Results The technical failure rate of MR elastography at 1.5 T was 3.5% (12 of 338), while it was higher, 15.3% (68 of 443), at 3.0 T. On the basis of univariate analysis, body mass index, liver iron deposition, massive ascites, use of 3.0 T, presence of cirrhosis, and alcoholic liver disease were all significantly associated with failure of MR elastography (P < .004); but on the basis of multivariable analysis, only body mass index, liver iron deposition, massive ascites, and use of 3.0 T were significantly associated with failure of MR elastography (P < .004). Conclusion The technical failure rate of MR elastography with a gradient-recalled-echo pulse sequence was low at 1.5 T but substantially higher at 3.0 T. Massive ascites, iron deposition, and high body mass index were additional independent factors associated with failure of MR elastography of the liver with a two-dimensional gradient-recalled-echo pulse sequence. © RSNA, 2017.

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

Design-Load Basis for LANL Structures, Systems, and Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

I. Cuesta

2004-09-01

This document supports the recommendations in the Los Alamos National Laboratory (LANL) Engineering Standard Manual (ESM), Chapter 5--Structural providing the basis for the loads, analysis procedures, and codes to be used in the ESM. It also provides the justification for eliminating the loads to be considered in design, and evidence that the design basis loads are appropriate and consistent with the graded approach required by the Department of Energy (DOE) Code of Federal Regulation Nuclear Safety Management, 10, Part 830. This document focuses on (1) the primary and secondary natural phenomena hazards listed in DOE-G-420.1-2, Appendix C, (2) additional loadsmore » not related to natural phenomena hazards, and (3) the design loads on structures during construction.« less

Bubbles, shocks and elementary technical trading strategies

NASA Astrophysics Data System (ADS)

Fry, John

2014-01-01

In this paper we provide a unifying framework for a set of seemingly disparate models for bubbles, shocks and elementary technical trading strategies in financial markets. Markets operate by balancing intrinsic levels of risk and return. This seemingly simple observation is commonly over-looked by academics and practitioners alike. Our model shares its origins in statistical physics with others. However, under our approach, changes in market regime can be explicitly shown to represent a phase transition from random to deterministic behaviour in prices. This structure leads to an improved physical and econometric model. We develop models for bubbles, shocks and elementary technical trading strategies. The list of empirical applications is both interesting and topical and includes real-estate bubbles and the on-going Eurozone crisis. We close by comparing the results of our model with purely qualitative findings from the finance literature.

Approach for Estimating Exposures and Incremental Health ...

EPA Pesticide Factsheets

Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings” (Technical Approach Document). Also available for public review and comment are two supplementary documents: the detailed appendices for the Technical Approach Document and a supplementary report entitled “Developing a Concentration-Response Function for Pb Exposure and Cardiovascular Disease-Related Mortality.” Together, these documents describes an analysis for estimating exposures and incremental health effects created by renovations of public and commercial buildings (P&CBs). This analysis could be used to identify and evaluate hazards from renovation, repair, and painting activities in P&CBs. A general overview of how this analysis can be used to inform EPA’s hazard finding is described in the Framework document that was previously made available for public comment (79 FR 31072; FRL9910-44). The analysis can be used in any proposed rulemaking to estimate the reduction in deleterious health effects that would result from any proposed regulatory requirements to mitigate exposure from P&CB renovation activities. The Technical Approach Document describes in detail how the analyses under this approach have been performed and presents the results – expected changes in blood lead levels and health effects due to lead exposure from renovation activities.

Atomization Energies of SO and SO2; Basis Set Extrapolation Revisted

NASA Technical Reports Server (NTRS)

Bauschlicher, Charles W., Jr.; Ricca, Alessandra; Arnold, James (Technical Monitor)

1998-01-01

The addition of tight functions to sulphur and extrapolation to the complete basis set limit are required to obtain accurate atomization energies. Six different extrapolation procedures are tried. The best atomization energies come from the series of basis sets that yield the most consistent results for all extrapolation techniques. In the variable alpha approach, alpha values larger than 4.5 or smaller than 3, appear to suggest that the extrapolation may not be reliable. It does not appear possible to determine a reliable basis set series using only the triple and quadruple zeta based sets. The scalar relativistic effects reduce the atomization of SO and SO2 by 0.34 and 0.81 kcal/mol, respectively, and clearly must be accounted for if a highly accurate atomization energy is to be computed. The magnitude of the core-valence (CV) contribution to the atomization is affected by missing diffuse valence functions. The CV contribution is much more stable if basis set superposition errors are accounted for. A similar study of SF, SF(+), and SF6 shows that the best family of basis sets varies with the nature of the S bonding.

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

Developing Knowledge Creating Technical Education Institutions through the Voice of Teachers: Content Analysis Approach

ERIC Educational Resources Information Center

Song, Ji Hoon; Kim, Hye Kyoung; Park, Sunyoung; Bae, Sang Hoon

2014-01-01

The purpose of this study was to develop an empirical data-driven model for a knowledge creation school system in career technical education (CTE) by identifying supportive and hindering factors influencing knowledge creation practices in CTE schools. Nonaka and colleagues' (Nonaka & Konno, 1998; Nonaka & Takeuchi, 1995) knowledge…

A Combined Kinetic and Volatility Basis Set Approach to Model Secondary Organic Aerosol from Toluene and Diesel Exhaust/Meat Cooking Mixtures

NASA Astrophysics Data System (ADS)

Parikh, H. M.; Carlton, A. G.; Zhang, H.; Kamens, R.; Vizuete, W.

2011-12-01

Secondary organic aerosol (SOA) is simulated for 6 outdoor smog chamber experiments using a SOA model based on a kinetic chemical mechanism in conjunction with a volatility basis set (VBS) approach. The experiments include toluene, a non-SOA-forming hydrocarbon mixture, diesel exhaust or meat cooking emissions and NOx, and are performed under varying conditions of relative humidity. SOA formation from toluene is modeled using a condensed kinetic aromatic mechanism that includes partitioning of lumped semi-volatile products in particle organic-phase and incorporates particle aqueous-phase chemistry to describe uptake of glyoxal and methylglyoxal. Modeling using the kinetic mechanism alone, along with primary organic aerosol (POA) from diesel exhaust (DE) /meat cooking (MC) fails to simulate the rapid SOA formation at the beginning hours of the experiments. Inclusion of a VBS approach with the kinetic mechanism to characterize the emissions and chemistry of complex mixture of intermediate volatility organic compounds (IVOCs) from DE/MC, substantially improves SOA predictions when compared with observed data. The VBS model includes photochemical aging of IVOCs and evaporation of POA after dilution. The relative contribution of SOA mass from DE/MC is as high as 95% in the morning, but substantially decreases after mid-afternoon. For high humidity experiments, aqueous-phase SOA fraction dominates the total SOA mass at the end of the day (approximately 50%). In summary, the combined kinetic and VBS approach provides a new and improved framework to semi-explicitly model SOA from VOC precursors in conjunction with a VBS approach that can be used on complex emission mixtures comprised with hundreds of individual chemical species.

[Arthrography of the temporomandibular joint. Indications, technic and interpretation].

PubMed

Jend, H H; Triebel, H J; Jend-Rossmann, I

1986-09-01

Articular dysfunction of the TMJ with anterior displacement of the disc ("internal derangement") is an entity which has been separated from other types of the "myofascial pain syndromes" and which can be treated conservatively or by surgery. Arthrography of the TMJ has contributed greatly to an understanding of normal and abnormal function and, in many cases, it can provide a diagnosis. On the basis of our experience with 80 investigations we discuss technical problems and the clinical indications. The indications for arthrography are in the pre-operative diagnosis, when clinical findings are uncertain, in order to demonstrate perforation, in order to confirm a suspected diagnosis and to assist in prosthetic treatment.

[Producing technical drawings using the feet--a special work site for a thalidomide-damaged technical draftswoman].

PubMed

Fischbach, F

1989-05-01

Persons with upper limb deficiency do not find it easy to lead a somewhat "normal" private, occupational and social life. True, society offers many kinds of assistance and support; it nevertheless is very much a matter of how the individual concerned reacts to the positive and negative influences and imponderabilities encountered. The present report sets out the efforts of a thalidomide-affected young woman who, in the face of numerous obstacles, left nothing untried to create a life basis of her own by obtaining a good vocational qualification as a technical draftswoman, regardless of her congenital upper limb amputation. Her success is proof enough that she chose the right course. This example, in more general terms, should perhaps be considered a prompting for society, on the one hand, to undertake the endeavour of providing quality assistance even in extreme situations and, on the other, to be prepared to have confidence even in those with very severe physical disablement to be able to accomplish goals which at the first glance may appear "nonsensical", such as a desire to be trained as a technical draftswoman even though one's hands are missing. The account not least shows the positive impact help and self-help may have in the rehabilitation of very severely disabled persons. The disabled person's reward primarily lies in the sense of independence achieved and in financial self-reliance, which in turn generate a sense of feeling free inwardly and outwardly.

A Qualitative Assessment of the Evidence Utilization for Health Policy-Making on the Basis of SUPPORT Tools in a Developing Country

PubMed Central

Hasan Imani-Nasab, Mohammad; Seyedin, Hesam; Yazdizadeh, Bahareh; Majdzadeh, Reza

2017-01-01

Background: SUPPORT tools consist of 18 articles addressing the health policy-makers so that they can learn how to make evidence-informed health policies. These tools have been particularly recommended for developing countries. The present study tries to explain the process of evidence utilization for developing policy documents in the Iranian Ministry of Health and Medical Education (MoHME) and to compare the findings with those of SUPPORT tools. Methods: A qualitative research was conducted, using the framework analysis approach. Participants consisted of senior managers and technicians in MoHME. Purposeful sampling was done, with a maximum variety, for the selection of research participants: individuals having at least 5 years of experience in preparing evidence-based policy documents. Face-to-face interviews were conducted for data collection. As a guideline for the interviews, ‘the Utilization of Evidence in Policy-Making Organizations’ procedure was used. The data were analyzed through the analysis of the framework method using MAXQDA 10 software. Results: The participants acquired the research evidence in a topic-based form, and they were less likely to search on the basis of the evidence pyramid. To assess the quality of evidence, they did not use standard critical tools; to adapt the evidence and interventions with the local setting, they did not use the ideas and experiences of all stakeholders, and in preparing the evidence-based policy documents, they did not take into consideration the window of opportunity, did not refrain from using highly technical terms, did not write user-friendly summaries, and did not present alternative policy options. In order to develop health policies, however, they used the following innovations: attention to the financial burden of policy issues on the agenda, sensitivity analysis of the preferred policy option on the basis of technical, sociopolitical, and economic feasibility, advocacy from other scholars, using the

Identifying and training non-technical skills for teams in acute medicine

PubMed Central

Flin, R; Maran, N

2004-01-01

The aviation domain provides a better analogy for the "temporary" teams that are found in acute medical specialities than industrial or military teamwork research based on established teams. Crew resource management (CRM) training, which emphasises portable skills (for whatever crew a pilot is rostered to on a given flight), has been recognised to have potential application in medicine, especially for teams in the operating theatre, intensive care unit, and emergency room. Drawing on research from aviation psychology that produced the behavioural marker system NOTECHS for rating European pilots' non-technical skills for teamwork on the flightdeck, this paper outlines the Anaesthetists Non-Technical Skills behavioural rating system for anaesthetists working in operating theatre teams. This taxonomy was used as the design basis for a training course, Crisis Avoidance Resource Management for Anaesthetists used to develop these skills, based in an operating theatre simulator. Further developments of this training programme for teams in emergency medicine are outlined. PMID:15465960

Technical information report: Plasma melter operation, reliability, and maintenance analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendrickson, D.W.

1995-03-14

This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences.

The Care of Our Hybrid Selves: Ethics in Times of Technical Mediation.

PubMed

Dorrestijn, Steven

2017-01-01

What can the art of living after Foucault contribute to ethics in relation to the mediation of human existence by technology? To develop the relation between technical mediation and ethics, firstly the theme of technical mediation is elaborated in line with Foucault's notion of ethical problematization. Every view of what technology does to us at the same time expresses an ethical concern about technology. The contemporary conception of technical mediation tends towards the acknowledgement of ongoing hybridization, not ultimately good or bad but ambivalent, which means for us the challenge of taking care of ourselves as hybrid beings. Secondly, the work of Foucault provides elements for imagining this care for our hybrid selves, notably his notions of freedom as a practice and of the care of the self. A conclusions about technical mediation and ethics is that whereas the approaches of the delegation of morality to technology by Latour and mediated morality by Verbeek see technical mediation of behavior and moral outlook as an answer in ethics, this should rather be considered the problem that ethics is about.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

PubMed

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

A technical case report on use of tubular retractors for anterior cervical spine surgery.

PubMed

Kulkarni, Arvind G; Patel, Ankit; Ankith, N V

2017-12-19

The authors put-forth this technical report to establish the feasibility of performing an anterior cervical corpectomy and fusion (ACCF) and a two-level anterior cervical discectomy and fusion (ACDF) using a minimally invasive approach with tubular retractors. First case: cervical spondylotic myelopathy secondary to a large postero-inferiorly migrated disc treated with corpectomy and reconstruction with a mesh cage and locking plate. Second case: cervical disc herniation with radiculopathy treated with a two-level ACDF. Both cases were operated with minimally invasive approach with tubular retractor using a single incision. Technical aspects and clinical outcomes have been reported. No intra or post-operative complications were encountered. Intra-operative blood loss was negligible. The patients had a cosmetic scar on healing. Standard procedure of placement of tubular retractors is sufficient for adequate surgical exposure with minimal invasiveness. Minimally invasive approach to anterior cervical spine with tubular retractors is feasible. This is the first report on use of minimally invasive approach for ACCF and two-level ACDF.

Accounting for model error in Bayesian solutions to hydrogeophysical inverse problems using a local basis approach

NASA Astrophysics Data System (ADS)

Irving, J.; Koepke, C.; Elsheikh, A. H.

2017-12-01

Bayesian solutions to geophysical and hydrological inverse problems are dependent upon a forward process model linking subsurface parameters to measured data, which is typically assumed to be known perfectly in the inversion procedure. However, in order to make the stochastic solution of the inverse problem computationally tractable using, for example, Markov-chain-Monte-Carlo (MCMC) methods, fast approximations of the forward model are commonly employed. This introduces model error into the problem, which has the potential to significantly bias posterior statistics and hamper data integration efforts if not properly accounted for. Here, we present a new methodology for addressing the issue of model error in Bayesian solutions to hydrogeophysical inverse problems that is geared towards the common case where these errors cannot be effectively characterized globally through some parametric statistical distribution or locally based on interpolation between a small number of computed realizations. Rather than focusing on the construction of a global or local error model, we instead work towards identification of the model-error component of the residual through a projection-based approach. In this regard, pairs of approximate and detailed model runs are stored in a dictionary that grows at a specified rate during the MCMC inversion procedure. At each iteration, a local model-error basis is constructed for the current test set of model parameters using the K-nearest neighbour entries in the dictionary, which is then used to separate the model error from the other error sources before computing the likelihood of the proposed set of model parameters. We demonstrate the performance of our technique on the inversion of synthetic crosshole ground-penetrating radar traveltime data for three different subsurface parameterizations of varying complexity. The synthetic data are generated using the eikonal equation, whereas a straight-ray forward model is assumed in the inversion

The common risk factor approach: a rational basis for promoting oral health.

PubMed

Sheiham, A; Watt, R G

2000-12-01

Conventional oral health education is not effective nor efficient. Many oral health programmes are developed and implemented in isolation from other health programmes. This often leads, at best to a duplication of effort, or worse, conflicting messages being delivered to the public. In addition, oral health programmes tend to concentrate on individual behaviour change and largely ignore the influence of socio-political factors as the key determinants of health. Based upon the general principles of health promotion this paper presents a rationale for an alternative approach for oral health policy. The common risk factor approach addresses risk factors common to many chronic conditions within the context of the wider socio-environmental milieu. Oral health is determined by diet, hygiene, smoking, alcohol use, stress and trauma. As these causes are common to a number of other chronic diseases, adopting a collaborative approach is more rational than one that is disease specific. The common risk factor approach can be implemented in a variety of ways. Food policy development and the Health Promoting Schools initiative are used as examples of effective ways of promoting oral health.

Mini-open lateral retroperitoneal lumbar spine approach using psoas muscle retraction technique. Technical report and initial results on six patients.

PubMed

Aghayev, Kamran; Vrionis, Frank D

2013-09-01

The main aim of this paper was to report reproducible method of lumbar spine access via a lateral retroperitoneal route. The authors conducted a retrospective analysis of the technical aspects and clinical outcomes of six patients who underwent lateral multilevel retroperitoneal interbody fusion with psoas muscle retraction technique. The main goal was to develop a simple and reproducible technique to avoid injury to the lumbar plexus. Six patients were operated at 15 levels using psoas muscle retraction technique. All patients reported improvement in back pain and radiculopathy after the surgery. The only procedure-related transient complication was weakness and pain on hip flexion that resolved by the first follow-up visit. Psoas retraction technique is a reliable technique for lateral access to the lumbar spine and may avoid some of the complications related to traditional minimally invasive transpsoas approach.

Technical Basis for the Removal of Unremediated Nitrate Salt Sampling (UNS) to Support LANL Treatment Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Funk, David John

2016-05-05

The sampling of unremediated nitrate salts (UNS) was originally proposed by the U.S. Department of Energy (DOE) and Los Alamos National Security, LLC (LANS) (collectively, the Permittees) as a means to ensure adequate understanding and characterization of the problematic waste stream created when the Permittees remediated these nitrate salts-bearing waste with an organic absorbent. The proposal to sample the UNS was driven by a lack of understanding with respect to the radioactive contamination release that occurred within the underground repository at the Waste Isolation Pilot Plant (WIPP) in February 14, 2014, as well as recommendations made by a Peer Reviewmore » Team. As discussed, the Permittees believe that current knowledge and understanding of the waste has sufficiently matured such that this additional sampling is not required. Perhaps more importantly, the risk of both chemical and radiological exposure to the workers sampling the UNS drum material is unwarranted. This memo provides the technical justification and rationale for excluding the UNS sampling from the treatment studies.« less

Resilient Control Systems Practical Metrics Basis for Defining Mission Impact

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig G. Rieger

"Resilience” describes how systems operate at an acceptable level of normalcy despite disturbances or threats. In this paper we first consider the cognitive, cyber-physical interdependencies inherent in critical infrastructure systems and how resilience differs from reliability to mitigate these risks. Terminology and metrics basis are provided to integrate the cognitive, cyber-physical aspects that should be considered when defining solutions for resilience. A practical approach is taken to roll this metrics basis up to system integrity and business case metrics that establish “proper operation” and “impact.” A notional chemical processing plant is the use case for demonstrating how the system integritymore » metrics can be applied to establish performance, and« less

A Systems Approach to Bio-Oil Stabilization - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Robert C; Meyer, Terrence; Fox, Rodney

2011-12-23

The objective of this project is to develop practical, cost effective methods for stabilizing biomass-derived fast pyrolysis oil for at least six months of storage under ambient conditions. The U.S. Department of Energy has targeted three strategies for stabilizing bio-oils: (1) reducing the oxygen content of the organic compounds comprising pyrolysis oil; (2) removal of carboxylic acid groups such that the total acid number (TAN) of the pyrolysis oil is dramatically reduced; and (3) reducing the charcoal content, which contains alkali metals known to catalyze reactions that increase the viscosity of bio-oil. Alkali and alkaline earth metals (AAEM), are knownmore » to catalyze decomposition reactions of biomass carbohydrates to produce light oxygenates that destabilize the resulting bio-oil. Methods envisioned to prevent the AAEM from reaction with the biomass carbohydrates include washing the AAEM out of the biomass with water or dilute acid or infusing an acid catalyst to passivate the AAEM. Infusion of acids into the feedstock to convert all of the AAEM to salts which are stable at pyrolysis temperatures proved to be a much more economically feasible process. Our results from pyrolyzing acid infused biomass showed increases in the yield of anhydrosugars by greater than 300% while greatly reducing the yield of light oxygenates that are known to destabilize bio-oil. Particulate matter can interfere with combustion or catalytic processing of either syngas or bio-oil. It also is thought to catalyze the polymerization of bio-oil, which increases the viscosity of bio-oil over time. High temperature bag houses, ceramic candle filters, and moving bed granular filters have been variously suggested for syngas cleaning at elevated temperatures. High temperature filtration of bio-oil vapors has also been suggested by the National Renewable Energy Laboratory although there remain technical challenges to this approach. The fast pyrolysis of biomass yields three main organic

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

identified three approaches community pharmacies used to appropriate procedures in practice. These were ‘technically oriented’, ‘improvising’ or ‘socially oriented’. Conclusion We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools. PMID:23256484

75 FR 64071 - Basis Reporting by Securities Brokers and Basis Determination for Stock

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... Determination--Average Basis Method a. Definition of Dividend Reinvestment Plan i. Acquisition of Stock... this provision and allow all UITs that elect to be treated as RICs to use the average basis method. The... served to limit the average basis method to stock in a DRP, the final regulations provide that, for...

Toward the Development of a Program Quality Framework for Career and Technical Education Programs: A Researcher-Practitioner Collaborative Project

ERIC Educational Resources Information Center

Brodersen, R. Marc; Yanoski, David; Hyslop, Alisha; Imperatore, Catherine

2016-01-01

Career and technical education (CTE) programs of study are subject to rigorous state and federal accountability systems that provide information on key student outcomes. However, while these outcome measures can form a basis for identifying high- and low-performing programs, they are insufficient for answering underlying questions about how or why…

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

PubMed

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses--Criticality (keff) Predictions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scaglione, John M; Mueller, Don; Wagner, John C

2011-01-01

One of the most significant remaining challenges associated with expanded implementation of burnup credit in the United States is the validation of depletion and criticality calculations used in the safety evaluation - in particular, the availability and use of applicable measured data to support validation, especially for fission products. Applicants and regulatory reviewers have been constrained by both a scarcity of data and a lack of clear technical basis or approach for use of the data. U.S. Nuclear Regulatory Commission (NRC) staff have noted that the rationale for restricting their Interim Staff Guidance on burnup credit (ISG-8) to actinide-only ismore » based largely on the lack of clear, definitive experiments that can be used to estimate the bias and uncertainty for computational analyses associated with using burnup credit. To address the issue of validation, the NRC initiated a project with the Oak Ridge National Laboratory to (1) develop and establish a technically sound validation approach (both depletion and criticality) for commercial spent nuclear fuel (SNF) criticality safety evaluations based on best-available data and methods and (2) apply the approach for representative SNF storage and transport configurations/conditions to demonstrate its usage and applicability, as well as to provide reference bias results. The purpose of this paper is to describe the criticality (k{sub eff}) validation approach, and resulting observations and recommendations. Validation of the isotopic composition (depletion) calculations is addressed in a companion paper at this conference. For criticality validation, the approach is to utilize (1) available laboratory critical experiment (LCE) data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments and the French Haut Taux de Combustion (HTC) program to support validation of the principal actinides and (2) calculated sensitivities, nuclear data uncertainties, and the limited available

Diffusion Forecasting Model with Basis Functions from QR-Decomposition

NASA Astrophysics Data System (ADS)

Harlim, John; Yang, Haizhao

2018-06-01

The diffusion forecasting is a nonparametric approach that provably solves the Fokker-Planck PDE corresponding to Itô diffusion without knowing the underlying equation. The key idea of this method is to approximate the solution of the Fokker-Planck equation with a discrete representation of the shift (Koopman) operator on a set of basis functions generated via the diffusion maps algorithm. While the choice of these basis functions is provably optimal under appropriate conditions, computing these basis functions is quite expensive since it requires the eigendecomposition of an N× N diffusion matrix, where N denotes the data size and could be very large. For large-scale forecasting problems, only a few leading eigenvectors are computationally achievable. To overcome this computational bottleneck, a new set of basis functions constructed by orthonormalizing selected columns of the diffusion matrix and its leading eigenvectors is proposed. This computation can be carried out efficiently via the unpivoted Householder QR factorization. The efficiency and effectiveness of the proposed algorithm will be shown in both deterministically chaotic and stochastic dynamical systems; in the former case, the superiority of the proposed basis functions over purely eigenvectors is significant, while in the latter case forecasting accuracy is improved relative to using a purely small number of eigenvectors. Supporting arguments will be provided on three- and six-dimensional chaotic ODEs, a three-dimensional SDE that mimics turbulent systems, and also on the two spatial modes associated with the boreal winter Madden-Julian Oscillation obtained from applying the Nonlinear Laplacian Spectral Analysis on the measured Outgoing Longwave Radiation.

Diffusion Forecasting Model with Basis Functions from QR-Decomposition

NASA Astrophysics Data System (ADS)

Harlim, John; Yang, Haizhao

2017-12-01

The diffusion forecasting is a nonparametric approach that provably solves the Fokker-Planck PDE corresponding to Itô diffusion without knowing the underlying equation. The key idea of this method is to approximate the solution of the Fokker-Planck equation with a discrete representation of the shift (Koopman) operator on a set of basis functions generated via the diffusion maps algorithm. While the choice of these basis functions is provably optimal under appropriate conditions, computing these basis functions is quite expensive since it requires the eigendecomposition of an N× N diffusion matrix, where N denotes the data size and could be very large. For large-scale forecasting problems, only a few leading eigenvectors are computationally achievable. To overcome this computational bottleneck, a new set of basis functions constructed by orthonormalizing selected columns of the diffusion matrix and its leading eigenvectors is proposed. This computation can be carried out efficiently via the unpivoted Householder QR factorization. The efficiency and effectiveness of the proposed algorithm will be shown in both deterministically chaotic and stochastic dynamical systems; in the former case, the superiority of the proposed basis functions over purely eigenvectors is significant, while in the latter case forecasting accuracy is improved relative to using a purely small number of eigenvectors. Supporting arguments will be provided on three- and six-dimensional chaotic ODEs, a three-dimensional SDE that mimics turbulent systems, and also on the two spatial modes associated with the boreal winter Madden-Julian Oscillation obtained from applying the Nonlinear Laplacian Spectral Analysis on the measured Outgoing Longwave Radiation.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Fibrin sheaths in central venous port catheters: treatment with low-dose, single injection of urokinase on an outpatient basis

PubMed Central

Chang, De-Hua; Mammadov, Kamal; Hickethier, Tilman; Borggrefe, Jan; Hellmich, Martin; Maintz, David; Kabbasch, Christoph

2017-01-01

Purpose Evaluation of the efficacy of single-shot, low-dose urokinase administration for the treatment of port catheter-associated fibrin sheaths. Methods Forty-six patients were retrospectively evaluated for 54 episodes of port catheter dysfunction. The presence of a fibrin sheath was detected by angiographic contrast examinations. On an outpatient basis, patients subsequently received thrombolysis consisting of a single injection of urokinase (15.000 IU in 1.5 mL normal saline) through the port system. A second attempt was made in cases of treatment failure. Patients were followed up for technical success, complications and long-term outcome. Results Port dysfunction occurred at a median of 117 days after implantation (range: 7–825 days). The technical success after first port dysfunction by thrombolysis was 87% (40/46); thereof, initial thrombolysis was effective in 78% (36/46). Nine patients (20%) received a second dose of urokinase after previous treatment failure. Follow-up was available for 26 of 40 patients after successful thrombolysis. In 8 of these, rethrombosis occurred after a median of 98 days (range: 21–354 days), whereby rethrombolysis was effective in 5 of 7 (63%) patients. The overall success of all thrombolyses performed was 70% (45/64). No procedure-related technical or clinical complications occurred. After first favorable thrombolysis, a Kaplan–Meier analysis yielded a 30-, 90- and 180-day probability of patency of 96%, 87% and 81%. Conclusion Thrombolytic therapy on an outpatient basis appears to be a safe and efficient. Three-month patency rates are comparable to more invasive treatment options, including catheter exchange over a guide wire and percutaneous fibrin sheath stripping. PMID:28182117

The functional basis of adaptive evolution in chemostats.

PubMed

Gresham, David; Hong, Jungeui

2015-01-01

Two of the central problems in biology are determining the molecular basis of adaptive evolution and understanding how cells regulate their growth. The chemostat is a device for culturing cells that provides great utility in tackling both of these problems: it enables precise control of the selective pressure under which organisms evolve and it facilitates experimental control of cell growth rate. The aim of this review is to synthesize results from studies of the functional basis of adaptive evolution in long-term chemostat selections using Escherichia coli and Saccharomyces cerevisiae. We describe the principle of the chemostat, provide a summary of studies of experimental evolution in chemostats, and use these studies to assess our current understanding of selection in the chemostat. Functional studies of adaptive evolution in chemostats provide a unique means of interrogating the genetic networks that control cell growth, which complements functional genomic approaches and quantitative trait loci (QTL) mapping in natural populations. An integrated approach to the study of adaptive evolution that accounts for both molecular function and evolutionary processes is critical to advancing our understanding of evolution. By renewing efforts to integrate these two research programs, experimental evolution in chemostats is ideally suited to extending the functional synthesis to the study of genetic networks. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permission@oup.com.

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

ERIC Educational Resources Information Center

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

The genetic basis of the fitness costs of antimicrobial resistance: a meta-analysis approach.

PubMed

Vogwill, Tom; MacLean, R Craig

2015-03-01

The evolution of antibiotic resistance carries a fitness cost, expressed in terms of reduced competitive ability in the absence of antibiotics. This cost plays a key role in the dynamics of resistance by generating selection against resistance when bacteria encounter an antibiotic-free environment. Previous work has shown that the cost of resistance is highly variable, but the underlying causes remain poorly understood. Here, we use a meta-analysis of the published resistance literature to determine how the genetic basis of resistance influences its cost. We find that on average chromosomal resistance mutations carry a larger cost than acquiring resistance via a plasmid. This may explain why resistance often evolves by plasmid acquisition. Second, we find that the cost of plasmid acquisition increases with the breadth of its resistance range. This suggests a potentially important limit on the evolution of extensive multidrug resistance via plasmids. We also find that epistasis can significantly alter the cost of mutational resistance. Overall, our study shows that the cost of antimicrobial resistance can be partially explained by its genetic basis. It also highlights both the danger associated with plasmidborne resistance and the need to understand why resistance plasmids carry a relatively low cost.

Technical Approach for Determining Key Parameters Needed for Modeling the Performance of Cast Stone for the Integrated Disposal Facility Performance Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yabusaki, Steven B.; Serne, R. Jeffrey; Rockhold, Mark L.

2015-03-30

Washington River Protection Solutions (WRPS) and its contractors at Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) are conducting a development program to develop / refine the cementitious waste form for the wastes treated at the ETF and to provide the data needed to support the IDF PA. This technical approach document is intended to provide guidance to the cementitious waste form development program with respect to the waste form characterization and testing information needed to support the IDF PA. At the time of the preparation of this technical approach document, the IDF PA effort is justmore » getting started and the approach to analyze the performance of the cementitious waste form has not been determined. Therefore, this document looks at a number of different approaches for evaluating the waste form performance and describes the testing needed to provide data for each approach. Though the approach addresses a cementitious secondary aqueous waste form, it is applicable to other waste forms such as Cast Stone for supplemental immobilization of Hanford LAW. The performance of Cast Stone as a physical and chemical barrier to the release of contaminants of concern (COCs) from solidification of Hanford liquid low activity waste (LAW) and secondary wastes processed through the Effluent Treatment Facility (ETF) is of critical importance to the Hanford Integrated Disposal Facility (IDF) total system performance assessment (TSPA). The effectiveness of cementitious waste forms as a barrier to COC release is expected to evolve with time. PA modeling must therefore anticipate and address processes, properties, and conditions that alter the physical and chemical controls on COC transport in the cementitious waste forms over time. Most organizations responsible for disposal facility operation and their regulators support an iterative hierarchical safety/performance assessment approach with a general philosophy that modeling

TECHNICAL BASIS DOCUMENT OF MARSSIM FIELD CALIBRATION FOR QUANTIFICATION OF CS-137 VOLUMETRICALLY CONTAMINTED SOILS IN THE BC CONTROLLED AREA USING A 4 BY 4 BY 16 INCH SODIUM IODIDE DETECTOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

PAPPIN JL

The purpose of this paper is to provide the Technical Basis and Documentation for Field Calibrations of radiation measurement equipment for use in the MARSSIM Seeping Surveys of the BC Controlled Area (BCCA). The Be Controlled Area is bounded on tt1e north by (but does not include) the BCCribs & Trenches and is bounded on the south by Army Loop Road. Parts of the BC Controlled Area are posted as a Contamination Area and the remainder is posted as a Soil Contamination Area. The area is approximately 13 square miles and divided into three zones (Zone A , Zone B.more » and Zone C). A map from reference 1 which shows the 3 zones is attached. The MARSSIM Scoping Surveys are intended 10 better identify the boundaries of the three zones based on the volumetric (pCi/g) contamination levels in the soil. The MARSSIM Field Calibration. reference 2. of radiation survey instrumentation will determine the Minimum Detectable Concentration (MDC) and an algorithm for converting counts to pCi/g. The instrumentation and corresponding results are not intended for occupational radiation protection decisions or for the release of property per DOE Order 5400.5.« less

A Systems Approach to Agricultural Biosecurity.

PubMed

Anand, Manish

This article highlights the importance of systems approaches in addressing agricultural biosecurity threats. On the basis of documentary analysis and stakeholder interaction, a brief survey of agricultural biosecurity threats and vulnerabilities from global and Indian perspectives is provided, followed by an exploration of technological and institutional capabilities. Finally, a perspective on the agricultural disease diagnostic networks is provided, drawing instances from global developments. Technical barriers to agroterrorism are lower than those to human-targeted bioterrorism, and the sector is unique as even a very small disease outbreak could prompt international export restrictions. Key vulnerabilities in the agriculture sector stem from, among others, the structure of agricultural production; insufficient monitoring, surveillance, and controls systems at the borders and in the food chain; inefficient systems for reporting unusual occurrences and outbreaks of disease; and lack of sufficiently trained human resources capable of recognizing or treating transboundary pathogens and diseases. An assessment of technology and institutions pertaining to crop and animal protection management suggests certain gaps. Investment in developing new technologies for civilian application in agriculture, as well as for legitimate actions pertaining to defense, detection, protection, and prophylaxis, and in upgrading laboratory facilities can increase the agricultural sector's level of preparedness for outbreaks. To address potential threats and vulnerabilities of agroterrorism effectively requires the development of a comprehensive strategy and a combined, interagency approach, ideally on an international level. It is proposed that a systems-oriented approach for developing knowledge and innovation networks and strengthening skills and capacities would enable a more resilient agricultural biosecurity system.

Alternative Significant Contribution Approaches Evaluated

EPA Pesticide Factsheets

This Technical Support Document (TSD) discusses alternative approaches that EPA evaluated for defining emissions that constitute each upwind state’s significant contribution to nonattainment and interference with maintenance downwind.

A socio-technical model to explore urban water systems scenarios.

PubMed

de Haan, Fjalar J; Ferguson, Briony C; Deletic, Ana; Brown, Rebekah R

2013-01-01

This article reports on the ongoing work and research involved in the development of a socio-technical model of urban water systems. Socio-technical means the model is not so much concerned with the technical or biophysical aspects of urban water systems, but rather with the social and institutional implications of the urban water infrastructure and vice versa. A socio-technical model, in the view purported in this article, produces scenarios of different urban water servicing solutions gaining or losing influence in meeting water-related societal needs, like potable water, drainage, environmental health and amenity. The urban water system is parameterised with vectors of the relative influence of each servicing solution. The model is a software implementation of the Multi-Pattern Approach, a theory on societal systems, like urban water systems, and how these develop and go through transitions under various internal and external conditions. Acknowledging that social dynamics comes with severe and non-reducible uncertainties, the model is set up to be exploratory, meaning that for any initial condition several possible future scenarios are produced. This article gives a concise overview of the necessary theoretical background, the model architecture and some initial test results using a drainage example.

Interpretive Discourse and Other Models from Communication Studies: Expanding the Values of Technical Communication

ERIC Educational Resources Information Center

Williams, Sean D.

2010-01-01

This article argues that in spite of some attempts to expand the diversity of approaches in Technical Communication, the field remains rooted in an expedient, managerial, techno-rational discourse, where discourse is understood as the values that guide research, practice, and teaching. The article draws on approaches from Communication Studies,…

The "Technical and Vocational Education Initiative": Enclaves in British Schools.

ERIC Educational Resources Information Center

Saunders, Murray

The Technical and Vocational Education Initiative (TVEI) is intended as a pilot, on a massive scale, of particular approaches, with a systematic need to identify TVEI effects on students, staff, resources, and curricula. TVEI has a strong tendency toward the development of pilot enclaves in terms of its administrative, curricular,…

The Molecular Basis of Human Brain Evolution.

PubMed

Enard, Wolfgang

2016-10-24

Humans are a remarkable species, especially because of the remarkable properties of their brain. Since the split from the chimpanzee lineage, the human brain has increased three-fold in size and has acquired abilities for vocal learning, language and intense cooperation. To better understand the molecular basis of these changes is of great biological and biomedical interest. However, all the about 16 million fixed genetic changes that occurred during human evolution are fully correlated with all molecular, cellular, anatomical and behavioral changes that occurred during this time. Hence, as humans and chimpanzees cannot be crossed or genetically manipulated, no direct evidence for linking particular genetic and molecular changes to human brain evolution can be obtained. Here, I sketch a framework how indirect evidence can be obtained and review findings related to the molecular basis of human cognition, vocal learning and brain size. In particular, I discuss how a comprehensive comparative approach, leveraging cellular systems and genomic technologies, could inform the evolution of our brain in the future. Copyright © 2016 Elsevier Ltd. All rights reserved.

National Alliance for Advanced Biofuels and Bio-Products Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olivares, Jose A.; Baxter, Ivan; Brown, Judith

2014-09-30

The main objective of NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. The approach was to address technology development across the entire value chain of algal biofuels production, from selection of strains to cultivation, harvesting, extraction, fuel conversion, and agricultural coproduct production. Sustainable practices and financial feasibility assessments ununderscored the approach and drove the technology development.

A socio-technical approach for improving a Brazilian shoe manufacturing system.

PubMed

Renner, J S; de M Guimarães, L B; de Oliveira, P A B

2012-01-01

This article presents a macroergonomic intervention in a footwear company in Rio Grande do Sul, Brazil, to improve both the quality of life of the employees and productivity by optimizing the traditional Taylor/Ford work organization. Multi-functionality and team working were implemented as means of making tasks more flexible and richer and the working hours were changed. The results showed a reduction in human and material resource costs and a consequent improvement in health and workers quality of life. Although middle managerial staff displayed strong resistance to the project and to breaking traditional production paradigms, the socio-technical system has been implemented throughout the plant and is expected to end up becoming the benchmark for other companies in the sector. Macro-ergonomics, footwear industry, organization work.

Physiological approach to optimal stereographic game programming: a technical guide

NASA Astrophysics Data System (ADS)

Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

1996-04-01

With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

Fully laparoscopic left hepatectomy - a technical reference proposed for standard practice compared to the open approach: a retrospective propensity score model.

PubMed

Valente, Roberto; Sutcliffe, Robert; Levesque, Eric; Costa, Mara; De' Angelis, Nicola; Tayar, Claude; Cherqui, Daniel; Laurent, Alexis

2018-04-01

Laparoscopic left hemihepatectomy (LLH) may be an alternative to open (OLH). There are several original variations in the technical aspects of LLH, and no accepted standard. The aim of this study is to assess the safety and effectiveness of the technique developed at Henri Mondor Hospital since 1996. The technique of LLH was conceived for safety and training of two mature generations of lead surgeons. The technique includes full laparoscopy, ventral approach to the common trunk, extrahepatic pedicle dissection, CUSA ® parenchymal transection, division of the left hilar plate laterally to the Arantius ligament, and ventral transection of the left hepatic vein. The outcomes of LLH and OLH were compared. Perioperative analysis included intra- and postoperative, and histology variables. Propensity Score Matching was undertaken of background covariates including age, ASA, BMI, fibrosis, steatosis, tumour size, and specimen weight. 17 LLH and 51 OLH were performed from 1996 to 2014 with perioperative mortality rates of 0% and 6%, respectively. In the LLH group, two patients underwent conversion to open surgery. Propensity matching selected 10 LLH/OLH pairs. The LLH group had a higher proportion of procedures for benign disease. LLH was associated with longer operating time and less blood loss. Perioperative complications occurred in 30% (LLH) and 10% (OLH) (p = 1). Mortality and ITU stay were similar. This technique is recommended as a possible technical reference for standard LLH. Copyright © 2017 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.

The Native Telehealth Outreach and Technical Assistance Program: a community-based approach to the development of multimedia-focused health care information.

PubMed

Dick, Rhonda Wiegman; Manson, Spero M; Hansen, Amy L; Huggins, Annie; Trullinger, Lori

2007-01-01

The development and dissemination of culturally relevant health care information has traditionally taken a "top-down" approach. Governmental funding agencies and research institutions have too often dictated the importance and focus of health-related research and information dissemination. In addition, the digital divide has affected rural communities in such a way that their members often do not possess the knowledge or experience necessary to use technological resources. And, even when they do, their skills may be limited, adequate only for implementing applications and programs designed by others who live and work outside of these communities. This need became the driving force in the creation of the Native Telehealth Outreach and Technical Assistance Program. The goal of the program is to equip Native community members, at both the lay and professional levels, with the means to use technology to address tribal health care needs. The transfer of relevant technical knowledge and skills enables participants to develop projects which enhance the community-wide dissemination of health care information. Nine community health advocates and professionals participated in the initial cohort. Eight of the participants successfully developed multimedia-based projects including Web sites, interactive CD-ROMs, and video focusing on a variety of health concerns. At the conclusion of the 18-month program period, projects were disseminated throughout rural communities. The NTOTAP staff continues to evaluate the use of these projects and their benefits within the rural communities.

Basis convergence of range-separated density-functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franck, Odile, E-mail: odile.franck@etu.upmc.fr; Mussard, Bastien, E-mail: bastien.mussard@upmc.fr; CNRS, UMR 7616, Laboratoire de Chimie Théorique, F-75005 Paris

2015-02-21

Range-separated density-functional theory (DFT) is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. Wemore » study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whereas it is polynomial for the case of the Coulomb interaction. We also study the convergence of the long-range second-order Møller-Plesset correlation energy of four systems (He, Ne, N{sub 2}, and H{sub 2}O) with cardinal number X of the Dunning basis sets cc − p(C)V XZ and find that the error in the correlation energy is best fitted by an exponential in X. This leads us to propose a three-point complete-basis-set extrapolation scheme for range-separated density-functional theory based on an exponential formula.« less

Basis convergence of range-separated density-functional theory.

PubMed

Franck, Odile; Mussard, Bastien; Luppi, Eleonora; Toulouse, Julien

2015-02-21

Range-separated density-functional theory (DFT) is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. We study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whereas it is polynomial for the case of the Coulomb interaction. We also study the convergence of the long-range second-order Møller-Plesset correlation energy of four systems (He, Ne, N2, and H2O) with cardinal number X of the Dunning basis sets cc - p(C)V XZ and find that the error in the correlation energy is best fitted by an exponential in X. This leads us to propose a three-point complete-basis-set extrapolation scheme for range-separated density-functional theory based on an exponential formula.

2013 Technical Roundtable

EPA Pesticide Factsheets

On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

The neural basis of human tool use

PubMed Central

Orban, Guy A.; Caruana, Fausto

2014-01-01

In this review, we propose that the neural basis for the spontaneous, diversified human tool use is an area devoted to the execution and observation of tool actions, located in the left anterior supramarginal gyrus (aSMG). The aSMG activation elicited by observing tool use is typical of human subjects, as macaques show no similar activation, even after an extensive training to use tools. The execution of tool actions, as well as their observation, requires the convergence upon aSMG of inputs from different parts of the dorsal and ventral visual streams. Non-semantic features of the target object may be provided by the posterior parietal cortex (PPC) for tool-object interaction, paralleling the well-known PPC input to anterior intraparietal (AIP) for hand-object interaction. Semantic information regarding tool identity, and knowledge of the typical manner of handling the tool, could be provided by inferior and middle regions of the temporal lobe. Somatosensory feedback and technical reasoning, as well as motor and intentional constraints also play roles during the planning of tool actions and consequently their signals likewise converge upon aSMG. We further propose that aSMG may have arisen though duplication of monkey AIP and invasion of the duplicate area by afferents from PPC providing distinct signals depending on the kinematics of the manipulative action. This duplication may have occurred when Homo Habilis or Homo Erectus emerged, generating the Oldowan or Acheulean Industrial complexes respectively. Hence tool use may have emerged during hominid evolution between bipedalism and language. We conclude that humans have two parietal systems involved in tool behavior: a biological circuit for grasping objects, including tools, and an artifactual system devoted specifically to tool use. Only the latter allows humans to understand the causal relationship between tool use and obtaining the goal, and is likely to be the basis of all technological developments. PMID

Technical Desiderata for the Integration of Genomic Data into Electronic Health Records

PubMed Central

Masys, Daniel R.; Jarvik, Gail P.; Abernethy, Neil F.; Anderson, Nicholas R.; Papanicolaou, George J.; Paltoo, Dina N.; Hoffman, Mark A.; Kohane, Isaac S.; Levy, Howard P.

2012-01-01

The era of “Personalized Medicine,” guided by individual molecular variation in DNA, RNA, expressed proteins and other forms of high volume molecular data brings new requirements and challenges to the design and implementation of Electronic Health Records (EHRs). In this article we describe the characteristics of biomolecular data that differentiate it from other classes of data commonly found in EHRs, enumerate a set of technical desiderata for its management in healthcare settings, and offer a candidate technical approach to its compact and efficient representation in operational systems. PMID:22223081

Technical features of the robot-assisted trans-axillary thyroidectomy.

PubMed

Axente, D D; Major, Z Z; Micu, C M; Constantea, N A

2013-01-01

Numerous minimally invasive techniques for thyroid surgery have been described in recent years. Technical disadvantages have led to low practicability, although these techniques proved to be safe and to deliver good results. The robotic system was developed to overcome the limits of endoscopic surgery.Recently, based on the advantages of this new technology, robot assisted endoscopic surgery was introduced for minimally invasive thyroid surgery as well. Our experience with robot-assisted transaxillary thyroid surgery begins in November 2010 when we have practiced our first unilateral total lobectomy. From November 2010 to March 2012, 50 patients underwent robot assisted endoscopic thyroid surgery using the transaxillary approach. The aim of this study is to present the technical details and particularities of this procedure, based on our experience.

Building Communities of Engineers to Share Technical Expertise

NASA Technical Reports Server (NTRS)

Topousis, Daria E.; Dennehy, Cornelius J.; Fesq, Lorraine M.

2012-01-01

Developed by the core community to describe our vision of an approach to ensure a sufficiently technically advanced and affordable AR&D technology base is available to support future NASA missions. The goal of this strategy is to create an environment exploiting reusable technology elements for an AR&D system design and development process which is: a) Lower-Risk. b) More Versatile/Scalable. c) Reliable & Crew-Safe. d) More Affordable.

Managing Technical and Cost Uncertainties During Product Development in a Simulation-Based Design Environment

NASA Technical Reports Server (NTRS)

Karandikar, Harsh M.

1997-01-01

An approach for objective and quantitative technical and cost risk analysis during product development, which is applicable from the earliest stages, is discussed. The approach is supported by a software tool called the Analytical System for Uncertainty and Risk Estimation (ASURE). Details of ASURE, the underlying concepts and its application history, are provided.

Principals' Conceptions of Their Current Power Basis Revealed through Phenomenography

ERIC Educational Resources Information Center

Özaslan, Gökhan

2018-01-01

Purpose: The purpose of this paper is to describe the variations in the ways that principals conceptualize their basis of power in schools. Design/methodology/approach: Phenomenography was used as the research method of this study. The interviewees consisted of 16 principals, eight from public schools and eight from private schools. Findings: The…

Moving towards Ethnorelativism: A Framework for Measuring and Meeting Students' Needs in Cross-Cultural Business and Technical Communication

ERIC Educational Resources Information Center

Wang, Junhua

2013-01-01

Scholars in business and technical communication have continuously made efforts to look for effective teaching approaches for cross-cultural business and technical communication; however, little research has been conducted to study the process by which students develop intercultural competence; fewer studies have been conducted to assess learners'…

Technical report writing

NASA Technical Reports Server (NTRS)

Vidoli, Carol A.

1992-01-01

This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

Matrix-product-state method with local basis optimization for nonequilibrium electron-phonon systems

NASA Astrophysics Data System (ADS)

Heidrich-Meisner, Fabian; Brockt, Christoph; Dorfner, Florian; Vidmar, Lev; Jeckelmann, Eric

We present a method for simulating the time evolution of quasi-one-dimensional correlated systems with strongly fluctuating bosonic degrees of freedom (e.g., phonons) using matrix product states. For this purpose we combine the time-evolving block decimation (TEBD) algorithm with a local basis optimization (LBO) approach. We discuss the performance of our approach in comparison to TEBD with a bare boson basis, exact diagonalization, and diagonalization in a limited functional space. TEBD with LBO can reduce the computational cost by orders of magnitude when boson fluctuations are large and thus it allows one to investigate problems that are out of reach of other approaches. First, we test our method on the non-equilibrium dynamics of a Holstein polaron and show that it allows us to study the regime of strong electron-phonon coupling. Second, the method is applied to the scattering of an electronic wave packet off a region with electron-phonon coupling. Our study reveals a rich physics including transient self-trapping and dissipation. Supported by Deutsche Forschungsgemeinschaft (DFG) via FOR 1807.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

1980 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1981-01-01

Offers resources on technical writing that were published in 1980. Arranges the citations under 12 categories: bibliographies, books, reviews, and articles on theory and philosophy; pedagogy; writing technical articles and reports; research; technical writing and the computer; graphic/visual aids; correspondence; technical speech; and designing…

1981 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1982-01-01

Offers resources on technical writing published in 1981. Arranges the citations under the following categories: bibliographies, books, reviews, and articles on the profession; theory and philosophy; pedagogy; technical speech; research; designing degree programs; technical writing and the computer; writing technical articles and reports;…

The role of socio-technical principles in leveraging meaningful benefits from IT investments.

PubMed

Doherty, Neil F

2014-03-01

In recent years there has been a great deal of academic and practitioner interest in the role of 'benefits realisation management' [BRM] approaches, as a means of proactively leveraging value from IT investments. This growing body of work owes a very considerable, but as yet unacknowledged, debt to the work of Ken Eason, and other early socio-technical theorists. Consequently, the aim of this paper is to demonstrate, using the literature, how many of the principles, practices and techniques of BRM have evolved either directly or indirectly from socio-technical approaches to systems design. In so doing, this article makes a further important contribution to the literature by explicitly identifying the underlying principles and key practices of benefits realisation management. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Natural Hospital Environment: a Socio-Technical-Material perspective.

PubMed

Fernando, Juanita; Dawson, Linda

2014-02-01

This paper introduces two concepts into analyses of information security and hospital-based information systems-- a Socio-Technical-Material theoretical framework and the Natural Hospital Environment. The research is grounded in a review of pertinent literature with previously published Australian (Victoria) case study data to analyse the way clinicians work with privacy and security in their work. The analysis was sorted into thematic categories, providing the basis for the Natural Hospital Environment and Socio-Technical-Material framework theories discussed here. Natural Hospital Environments feature inadequate yet pervasive computer use, aural privacy shortcomings, shared workspace, meagre budgets, complex regulation that hinders training outcomes and out-dated infrastructure and are highly interruptive. Working collaboratively in many cases, participants found ways to avoid or misuse security tools, such as passwords or screensavers for patient care. Workgroup infrastructure was old, architecturally limited, haphazard in some instances, and was less useful than paper handover sheets to ensure the quality of patient care outcomes. Despite valiant efforts by some participants, they were unable to control factors influencing the privacy of patient health information in public hospital settings. Future improvements to hospital-based organisational frameworks for e-health can only be made when there is an improved understanding of the Socio-Technical-Material theoretical framework and Natural Hospital Environment contexts. Aspects within control of clinicians and administrators can be addressed directly although some others are beyond their control. An understanding and acknowledgement of these issues will benefit the management and planning of improved and secure hospital settings. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities.

PubMed

Cho, Il-Hoon; Ku, Seockmo

2017-09-30

The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods). Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Basis function models for animal movement

USGS Publications Warehouse

Hooten, Mevin B.; Johnson, Devin S.

2017-01-01

Advances in satellite-based data collection techniques have served as a catalyst for new statistical methodology to analyze these data. In wildlife ecological studies, satellite-based data and methodology have provided a wealth of information about animal space use and the investigation of individual-based animal–environment relationships. With the technology for data collection improving dramatically over time, we are left with massive archives of historical animal telemetry data of varying quality. While many contemporary statistical approaches for inferring movement behavior are specified in discrete time, we develop a flexible continuous-time stochastic integral equation framework that is amenable to reduced-rank second-order covariance parameterizations. We demonstrate how the associated first-order basis functions can be constructed to mimic behavioral characteristics in realistic trajectory processes using telemetry data from mule deer and mountain lion individuals in western North America. Our approach is parallelizable and provides inference for heterogenous trajectories using nonstationary spatial modeling techniques that are feasible for large telemetry datasets. Supplementary materials for this article are available online.

Training the Technical Editor.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

The demand for skilled technical editors is growing as society places increasing emphasis on receiving accurate, concise, and complete technical data. Since many organizations do not have inhouse programs for training technical editors, a need exists to provide inexperienced people with basic editing skills. One organization has developed two…

Synthesis and characterization of barium silicide (BaSi2) nanowire arrays for potential solar applications.

PubMed

Pokhrel, Ankit; Samad, Leith; Meng, Fei; Jin, Song

2015-11-07

In order to utilize nanostructured materials for potential solar and other energy-harvesting applications, scalable synthetic techniques for these materials must be developed. Herein we use a vapor phase conversion approach to synthesize nanowire (NW) arrays of semiconducting barium silicide (BaSi2) in high yield for the first time for potential solar applications. Dense arrays of silicon NWs obtained by metal-assisted chemical etching were converted to single-crystalline BaSi2 NW arrays by reacting with Ba vapor at about 930 °C. Structural characterization by X-ray diffraction and high-resolution transmission electron microscopy confirm that the converted NWs are single-crystalline BaSi2. The optimal conversion reaction conditions allow the phase-pure synthesis of BaSi2 NWs that maintain the original NW morphology, and tuning the reaction parameters led to a controllable synthesis of BaSi2 films on silicon substrates. The optical bandgap and electrochemical measurements of these BaSi2 NWs reveal a bandgap and carrier concentrations comparable to previously reported values for BaSi2 thin films.

Distance Learning Success--A Perspective from Socio-Technical Systems Theory

ERIC Educational Resources Information Center

Wang, Jianfeng; Solan, David; Ghods, Abe

2010-01-01

With widespread adoption of computer-based distance education as a mission-critical component of the institution's educational program, the need for evaluation has emerged. In this research, we aim to expand on the systems approach by offering a model for evaluation based on socio-technical systems theory addressing a stated need in the literature…

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD13-6-000] Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory... related to the reliability of the Bulk-Power System. A more formal agenda will be issued at a later date...

The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

ERIC Educational Resources Information Center

Whiteside, Aimee L.

2003-01-01

This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

Basis Selection for Wavelet Regression

NASA Technical Reports Server (NTRS)

Wheeler, Kevin R.; Lau, Sonie (Technical Monitor)

1998-01-01

A wavelet basis selection procedure is presented for wavelet regression. Both the basis and the threshold are selected using cross-validation. The method includes the capability of incorporating prior knowledge on the smoothness (or shape of the basis functions) into the basis selection procedure. The results of the method are demonstrated on sampled functions widely used in the wavelet regression literature. The results of the method are contrasted with other published methods.

SUPERFUND TECHNICAL SUPPORT

EPA Science Inventory

Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

Technical Efficiency of Automotive Industry Cluster in Chennai

NASA Astrophysics Data System (ADS)

Bhaskaran, E.

2012-07-01

Chennai is also called as Detroit of India due to its automotive industry presence producing over 40 % of the India's vehicle and components. During 2001-2002, diagnostic study was conducted on the Automotive Component Industries (ACI) in Ambattur Industrial Estate, Chennai and in SWOT analysis it was found that it had faced problems on infrastructure, technology, procurement, production and marketing. In the year 2004-2005 under the cluster development approach (CDA), they formed Chennai auto cluster, under public private partnership concept, received grant from Government of India, Government of Tamil Nadu, Ambattur Municipality, bank loans and stake holders. This results development in infrastructure, technology, procurement, production and marketing interrelationships among ACI. The objective is to determine the correlation coefficient, regression equation, technical efficiency, peer weights, slack variables and return to scale of cluster before and after the CDA. The methodology adopted is collection of primary data from ACI and analyzing using data envelopment analysis (DEA) of input oriented Banker-Charnes-Cooper model. There is significant increase in correlation coefficient and the regression analysis reveals that for one percent increase in employment and net worth, the gross output increases significantly after the CDA. The DEA solver gives the technical efficiency of ACI by taking shift, employment, net worth as input data and quality, gross output and export ratio as output data. From the technical score and ranking of ACI, it is found that there is significant increase in technical efficiency of ACI when compared to CDA. The slack variables obtained clearly reveals the excess employment and net worth and no shortage of gross output. To conclude there is increase in technical efficiency of not only Chennai auto cluster in general but also Chennai auto components industries in particular.

Identification of Modeling Approaches To Support Common-Cause Failure Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, Kofi; Wood, Richard Thomas

2015-06-01

Experience with applying current guidance and practices for common-cause failure (CCF) mitigation to digital instrumentation and control (I&C) systems has proven problematic, and the regulatory environment has been unpredictable. The impact of CCF vulnerability is to inhibit I&C modernization and, thereby, challenge the long-term sustainability of existing plants. For new plants and advanced reactor concepts, the issue of CCF vulnerability for highly integrated digital I&C systems imposes a design burden resulting in higher costs and increased complexity. The regulatory uncertainty regarding which mitigation strategies are acceptable (e.g., what diversity is needed and how much is sufficient) drives designers to adoptmore » complicated, costly solutions devised for existing plants. The conditions that constrain the transition to digital I&C technology by the U.S. nuclear industry require crosscutting research to resolve uncertainty, demonstrate necessary characteristics, and establish an objective basis for qualification of digital technology for usage in Nuclear Power Plant (NPP) I&C applications. To fulfill this research need, Oak Ridge National Laboratory is conducting an investigation into mitigation of CCF vulnerability for nuclear-qualified applications. The outcome of this research is expected to contribute to a fundamentally sound, comprehensive technical basis for establishing the qualification of digital technology for nuclear power applications. This report documents the investigation of modeling approaches for representing failure of I&C systems. Failure models are used when there is a need to analyze how the probability of success (or failure) of a system depends on the success (or failure) of individual elements. If these failure models are extensible to represent CCF, then they can be employed to support analysis of CCF vulnerabilities and mitigation strategies. Specifically, the research findings documented in this report identify modeling

Anterior Spinal Reconstruction to the Clivus Using an Expandable Cage After C2 Chordoma Resection Via a Labiomandibular Glossotomy Approach: A Technical Report.

PubMed

Ozpinar, Alp; Liu, Jesse J; Whitney, Nathaniel L; Tempel, Zachary J; Choi, Philip A; Andersen, Peter E; Coppa, Nicholas D; Hamilton, D Kojo

2016-06-01

En bloc resection of high-cervical chordomas is a technically challenging procedure associated with significant morbidity. Two key components of this procedure include the approach and the method of spinal reconstruction. A limited number of reported cases of en bloc resection of high-cervical chordomas have been reported in the literature. We report a novel case using an expandable cage to reconstruct the anterior spinal column above C2 with fixation to the clivus. We also report a novel anterior approach to the high-cervical spine via a midline labiomandibular glossotomy. We detail the management of complications related to 2 instances of wound dehiscence and hardware exposure requiring two additional operations. The final surgical procedure involved explantation of the anterior cervical plate and use of a vascularized radial graft to close the posterior pharyngeal defect and protect the hardware. At 26-month follow-up, the patient remained disease free without any neurologic deficit. We report the novel use of the midline labiomandibular glossotomy for surgical approach and reconstruction of the anterior column to the clivus with an expandable cage. The unique features of this operative strategy allowed the surgical team to tailor the construct intraoperatively, resulting in solid arthrodesis without significant neurologic sequelae. Labiomandibular glossotomy for approach to high anterior cervical chordomas followed by craniospinal reconstruction to the clivus with an expandable cage represents a novel technique for managing high cervical chordomas. Copyright © 2016 Elsevier Inc. All rights reserved.

[Virtual endoscopy with a volumetric reconstruction technic: the technical aspects].

PubMed

Pavone, P; Laghi, A; Panebianco, V; Catalano, C; Giura, R; Passariello, R

1998-06-01

We analyze the peculiar technical features of virtual endoscopy obtained with volume rendering. Our preliminary experience is based on virtual endoscopy images from volumetric data acquired with spiral CT (Siemens, Somatom Plus 4) using acquisition protocols standardized for different anatomic areas. Images are reformatted at the CT console, to obtain 1 mm thick contiguous slices, and transferred in DICOM format to an O2 workstation (Silicon Graphics, Mountain View CA, USA) with processor speed of 180 Mhz, 256 Mbyte RAM memory and 4.1 Gbyte hard disk. The software is Vitrea 1.0 (Vital Images, Fairfield, Iowa), running on a Unix platform. Image output is obtained through the Ethernet network to a Macintosh computer and a thermic printer (Kodak 8600 XLS). Diagnostic quality images were obtained in all the cases. Fly-through in the airways allowed correct evaluation of the main bronchi and of the origin of segmentary bronchi. In the vascular district, both carotid strictures and abdominal aortic aneurysms were depicted, with the same accuracy as with conventional reconstruction techniques. In the colon studies, polypoid lesions were correctly depicted in all the cases, with good correlation with endoscopic and double-contrast barium enema findings. In a case of lipoma of the ascending colon, virtual endoscopy allowed to study the colon both cranially and caudally to the lesion. The simultaneous evaluation of axial CT images permitted to characterize the lesion correctly on the basis of its density values. The peculiar feature of volume rendering is the use of the whole information inside the imaging volume to reconstruct three-dimensional images; no threshold values are used and no data are lost as opposite to conventional image reconstruction techniques. The different anatomic structures are visualized modifying the reciprocal opacities, showing the structures of no interest as translucent. The modulation of different opacities is obtained modifying the shape of the

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

21st Century Readiness Skills for Career and Technical Education

ERIC Educational Resources Information Center

Bennett, Tyrone L.

2012-01-01

The 21st century has embraced the technological age by storm and has approached us quicker than most have expected, leaving many still stuck in the 20th century. Technical careers require very skilled workers and their education has sprung as a strong vehicle all over the country but still most of our employed citizens, especially the youth, have…

BASINS Technical Notes

EPA Pesticide Factsheets

EPA has developed several technical notes that provide in depth information on a specific function in BASINS. Technical notes can be used to answer questions users may have, or to provide additional information on the application of features in BASINS.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glasser, Alan H.

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed Central

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-01-01

Background Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. Methods In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the ‘Anaesthetists’ Non-technical Skill’ score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Results Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI −0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team

Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

DOT National Transportation Integrated Search

1998-10-01

The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

PubMed

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency

Synthesizing Huber's Problem Solving and Kolb's Learning Cycle: A Balanced Approach to Technical Problem Solving

ERIC Educational Resources Information Center

Kamis, Arnold; Khan, Beverly K.

2009-01-01

How do we model and improve technical problem solving, such as network subnetting? This paper reports an experimental study that tested several hypotheses derived from Kolb's experiential learning cycle and Huber's problem solving model. As subjects solved a network subnetting problem, they mapped their mental processes according to Huber's…

Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

ERIC Educational Resources Information Center

Gragson, Derek E.; Hagen, John P.

2010-01-01

Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

Writing a technical note.

PubMed

Ng, K H; Peh, W C G

2010-02-01

A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

NASA Technical Reports Server (NTRS)

Baldwin, Evelyn

2008-01-01

The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

Alternative Modal Basis Selection Procedures for Nonlinear Random Response Simulation

NASA Technical Reports Server (NTRS)

Przekop, Adam; Guo, Xinyun; Rizzi, Stephen A.

2010-01-01

Three procedures to guide selection of an efficient modal basis in a nonlinear random response analysis are examined. One method is based only on proper orthogonal decomposition, while the other two additionally involve smooth orthogonal decomposition. Acoustic random response problems are employed to assess the performance of the three modal basis selection approaches. A thermally post-buckled beam exhibiting snap-through behavior, a shallowly curved arch in the auto-parametric response regime and a plate structure are used as numerical test articles. The results of the three reduced-order analyses are compared with the results of the computationally taxing simulation in the physical degrees of freedom. For the cases considered, all three methods are shown to produce modal bases resulting in accurate and computationally efficient reduced-order nonlinear simulations.

Wavelet decomposition and radial basis function networks for system monitoring

NASA Astrophysics Data System (ADS)

Ikonomopoulos, A.; Endou, A.

1998-10-01

Two approaches are coupled to develop a novel collection of black box models for monitoring operational parameters in a complex system. The idea springs from the intention of obtaining multiple predictions for each system variable and fusing them before they are used to validate the actual measurement. The proposed architecture pairs the analytical abilities of the discrete wavelet decomposition with the computational power of radial basis function networks. Members of a wavelet family are constructed in a systematic way and chosen through a statistical selection criterion that optimizes the structure of the network. Network parameters are further optimized through a quasi-Newton algorithm. The methodology is demonstrated utilizing data obtained during two transients of the Monju fast breeder reactor. The models developed are benchmarked with respect to similar regressors based on Gaussian basis functions.

7 CFR 1469.9 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance. 1469.9 Section 1469.9... Provisions § 1469.9 Technical assistance. (a) NRCS may use the services of NRCS-approved or certified Technical Service Providers in performing its responsibilities for technical assistance. (b) Technical...

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Theorycrafting the Classroom: Constructing the Introductory Technical Communication Course as a Game

ERIC Educational Resources Information Center

Finseth, Carly

2015-01-01

When games are approached as a pedagogical methodology, the homologies between games and technical communication are highlighted: pedagogy that teaches people to play and succeed within certain confines; classroom assessment that provides meaningful feedback to encourage self-improvement; instructional design that incorporates gaming theory and…

Sophistic Ethics in the Technical Writing Classroom: Teaching "Nomos," Deliberation, and Action.

ERIC Educational Resources Information Center

Scott, J. Blake

1995-01-01

Claims that teaching ethics is particularly important to technical writing. Outlines a classical, sophistic approach to ethics based on the theories and pedagogies of Protagoras, Gorgias, and Isocrates, which emphasizes the Greek concept of "nomos," internal and external deliberation, and responsible action. Discusses problems and…

Exploring Socio-Technical Insights for Safe Nursing Handover.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Turner, Paul

2017-01-01

Current efforts to improve nursing handover frequently use prescriptive approaches based on research evidence of handover issues within a single nursing ward or nursing specialty. Despite reported handover improvement, few studies adequately consider the transferability of results to other nursing handover environments or acknowledge the unique attributes that supported sustained improvement. With the increasing diffusion of electronic tools it has become even more critical to ensure that socio-technical issues that may impact on the quality and safety of nursing handovers are identified. This paper describes a qualitative research project that examined nursing handover in three different wards - General Medicine, General Surgery and Department of Emergency Medicine in a tertiary teaching hospital. Through conduct of a detailed analysis of nursing handover processes, this paper highlights the similarities and differences in the handover among the three different wards and presents five key socio-technical insights to support safe nursing handover.

The International Linear Collider Technical Design Report - Volume 2: Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Howard; Barklow, Tim; Fujii, Keisuke

2013-06-26

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carriedmore » out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.« less

The International Linear Collider Technical Design Report - Volume 4: Detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behnke, Ties

2013-06-26

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carriedmore » out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.« less

A Review of Legal Decisions Relevant to Technical Standards Used in Pharmacy School Admissions

PubMed Central

2017-01-01

The implementation of an effective and legally sound technical standards procedure for pharmacy schools requires a proactive approach by admissions officers. Applicants with disabilities are accorded significant rights that must not be infringed during the admissions process in order to ensure compliance with applicable law. This article provides a review of applicable state cases, federal cases, and OCR decisions and guidance to help pharmacy schools identify procedures and implement technical standards into their admissions processes as required by ACPE Standards 2016. PMID:28381897

Exploring the attributes of critical thinking: a conceptual basis.

PubMed

Forneris, Susan G

2004-01-01

Many teaching methods used in nursing education to enhance critical thinking focus on teaching students how to directly apply knowledge; a technically rational approach. While seemingly effective at enhancing students' critical thinking abilities in structured learning situations, these methods don't prepare students to operationalize critical thinking to manage the complexities that actually exist in practice. The work of contemporary educational theorists Paulo Freire, Donald Schon, Chris Argyris, Jack Mezirow, Stephen Brookfield, and Robert Tennyson all share similar perspectives on thinking in practice and the use of reflection to achieve a coherence of understanding. Their perspectives provide insight on how educators can shift from a means-end approach to operationalizing thinking in practice. The author identifies four attributes of critical thinking in practice evidenced in these views, followed by a discussion of specific educational strategies that reflect these attributes, and operationalize a critical thinking process in nursing practice to achieve a coherence of understanding.

[Technical specification for clinical application of critical ultrasonography].

PubMed

Yin, M G; Wang, X T; Liu, D W; Chao, Y G; Guan, X D; Kang, Y; Yan, J; Ma, X C; Tang, Y Q; Hu, Z J; Yu, K J; Chen, D C; Ai, Y H; Zhang, L N; Zhang, H M; Wu, J; Liu, L X; Zhu, R; He, W; Zhang, Q; Ding, X; Li, L; Li, Y; Liu, H T; Zeng, Q B; Si, X; Chen, H; Zhang, J W; Xu, Q H; Chen, W J; Chen, X K; Huang, D Z; Cai, S H; Shang, X L; Guan, J; Du, J; Zhao, L; Wang, M J; Cui, S; Wang, X M; Zhou, R; Zeng, X Y; Wang, Y P; Lyu, L W; Zhu, W H; Zhu, Y; Duan, J; Yang, J; Yang, H

2018-06-01

Critical ultrasonography(CUS) is different from the traditional diagnostic ultrasound, the examiner and interpreter of the image are critical care medicine physicians. The core content of CUS is to evaluate the pathophysiological changes of organs and systems and etiology changes. With the idea of critical care medicine as the soul, it can integrate the above information and clinical information, bedside real-time diagnosis and titration treatment, and evaluate the therapeutic effect so as to improve the outcome. CUS is a traditional technique which is applied as a new application method. The consensus of experts on critical ultrasonography in China released in 2016 put forward consensus suggestions on the concept, implementation and application of CUS. It should be further emphasized that the accurate and objective assessment and implementation of CUS requires the standardization of ultrasound image acquisition and the need to establish a CUS procedure. At the same time, the standardized training for CUS accepted by critical care medicine physicians requires the application of technical specifications, and the establishment of technical specifications is the basis for the quality control and continuous improvement of CUS. Chinese Critical Ultrasound Study Group and Critical Hemodynamic Therapy Collabration Group, based on the rich experience of clinical practice in critical care and research, combined with the essence of CUS, to learn the traditional ultrasonic essence, established the clinical application technical specifications of CUS, including in five parts: basic view and relevant indicators to obtain in CUS; basic norms for viscera organ assessment and special assessment; standardized processes and systematic inspection programs; examples of CUS applications; CUS training and the application of qualification certification. The establishment of applied technology standard is helpful for standardized training and clinical correct implementation. It is helpful

Correlation consistent basis sets for actinides. I. The Th and U atoms.

PubMed

Peterson, Kirk A

2015-02-21

New correlation consistent basis sets based on both pseudopotential (PP) and all-electron Douglas-Kroll-Hess (DKH) Hamiltonians have been developed from double- to quadruple-zeta quality for the actinide atoms thorium and uranium. Sets for valence electron correlation (5f6s6p6d), cc - pV nZ - PP and cc - pV nZ - DK3, as well as outer-core correlation (valence + 5s5p5d), cc - pwCV nZ - PP and cc - pwCV nZ - DK3, are reported (n = D, T, Q). The -PP sets are constructed in conjunction with small-core, 60-electron PPs, while the -DK3 sets utilized the 3rd-order Douglas-Kroll-Hess scalar relativistic Hamiltonian. Both series of basis sets show systematic convergence towards the complete basis set limit, both at the Hartree-Fock and correlated levels of theory, making them amenable to standard basis set extrapolation techniques. To assess the utility of the new basis sets, extensive coupled cluster composite thermochemistry calculations of ThFn (n = 2 - 4), ThO2, and UFn (n = 4 - 6) have been carried out. After accurately accounting for valence and outer-core correlation, spin-orbit coupling, and even Lamb shift effects, the final 298 K atomization enthalpies of ThF4, ThF3, ThF2, and ThO2 are all within their experimental uncertainties. Bond dissociation energies of ThF4 and ThF3, as well as UF6 and UF5, were similarly accurate. The derived enthalpies of formation for these species also showed a very satisfactory agreement with experiment, demonstrating that the new basis sets allow for the use of accurate composite schemes just as in molecular systems composed only of lighter atoms. The differences between the PP and DK3 approaches were found to increase with the change in formal oxidation state on the actinide atom, approaching 5-6 kcal/mol for the atomization enthalpies of ThF4 and ThO2. The DKH3 atomization energy of ThO2 was calculated to be smaller than the DKH2 value by ∼1 kcal/mol.

Volkov basis for simulation of interaction of strong laser pulses and solids

NASA Astrophysics Data System (ADS)

Kidd, Daniel; Covington, Cody; Li, Yonghui; Varga, Kálmán

2018-01-01

An efficient and accurate basis comprised of Volkov states is implemented and tested for time-dependent simulations of interactions between strong laser pulses and crystalline solids. The Volkov states are eigenstates of the free electron Hamiltonian in an electromagnetic field and analytically represent the rapidly oscillating time-dependence of the orbitals, allowing significantly faster time propagation than conventional approaches. The Volkov approach can be readily implemented in plane-wave codes by multiplying the potential energy matrix elements with a simple time-dependent phase factor.

Technical/Reference Books--Potential Often Underestimated. Books of This Type Lend Themselves to What Can Be Described As Unique Styles of Merchandising

ERIC Educational Resources Information Center

Turk, John W.

1975-01-01

Technical/reference books must be sold by the college store for it to continue as an educational resource center. A professional retailing approach to technical/reference books will increase sales and contribute to profits. (Author/PG)

A Systematic Approach to Error Free Telemetry

DTIC Science & Technology

2017-06-28

A SYSTEMATIC APPROACH TO ERROR FREE TELEMETRY 412TW-TIM-17-03 DISTRIBUTION A: Approved for public release. Distribution is...Systematic Approach to Error-Free Telemetry) was submitted by the Commander, 412th Test Wing, Edwards AFB, California 93524. Prepared by...Technical Information Memorandum 3. DATES COVERED (From - Through) February 2016 4. TITLE AND SUBTITLE A Systematic Approach to Error-Free

Factors affecting the technical efficiency of general hospitals in Iran: data envelopment analysis.

PubMed

Kalhor, Rohollah; Amini, Saeed; Sokhanvar, Mobin; Lotfi, Farhad; Sharifi, Marziye; Kakemam, Edris

2016-03-01

Restrictions on resource accessibility and its optimal application is the main challenge in organizations nowadays. The aim of this research was to study the technical efficiency and its related factors in Tehran general hospitals. This descriptive analytical study was conducted retrospectively in 2014. Fifty-four hospitals with private, university, and social security ownerships from the total 110 general hospitals were randomly selected for inclusion into this study on the basis of the share of ownership. Data were collected using a checklist with three sections, including background variables, inputs, and outputs. Seventeen (31.48%) hospitals had an efficiency score of 1 (highest efficiency score). The highest average efficiency score was in social security hospitals (84.32). Private and university hospitals ranked next with an average of 84.29 and 79.64, respectively. Analytical results showed that there was a significant relationship between hospital ownership, hospital type in terms of duty and specialization, educational field of the chief executive officer, and technical efficiency. There was no significant relationship between education level of hospital manager and technical efficiency. Most of the studied hospitals were operating at low efficiency. Therefore, policymakers should plan to improve the hospital operations and promote hospitals to an optimal level of efficiency.

DSAEK: practical approach to choose the microkeratome head on the basis of donor cornea pachymetry.

PubMed

Wisse, Robert P L; Achterberg, Jens A; Van der Lelij, Allegonda

2014-03-01

The aim of this study was to supply data on the relationship between Descemet stripping automated endothelial keratoplasty (DSAEK) graft thickness and its effects on visual acuity (VA), pace of visual recovery, endothelial cell densities (ECDs), and surgical complications. We additionally provide an approach for choosing the microkeratome blade thickness when multiple patients are scheduled for DSAEK. This is a retrospective analysis of all DSAEK procedures performed at our institute from January 2011 to December 2012. The VA was assessed at all postop visits. The ECD was assessed at 6 and 12 months postoperatively. An algorithm based on donor cornea pachymetry was used to assist in the choice of a microkeratome blade either 350 or 400 μm thick. Two groups were created on the basis of the microkeratome blade chosen. Outcomes were given per treatment group. One hundred two consecutive DSAEK procedures were performed; 60 grafts were prepared with the 350-μm blade and 39 with the 400-μm blade. Baseline characteristics did not differ materially. Grafts dissected using the 350-μm knife were significantly thicker than the grafts dissected with the 400-μm blade, with values of 257 ± 47 μm and 222 ± 33 μm, respectively (P = 0.01). The pace of visual recovery, VA at maximum follow-up, and ECD did not differ significantly between groups. Surgical complications were evenly distributed over both groups. This study indicates that using neither the 350-μm nor 400-μm microkeratome blade for the DSAEK altered the outcomes in terms of VA, ECD, and surgical complications. The algorithm presented in this study is helpful in equally distributing benefits from thinner grafting for all DSAEK-operated patients.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI -0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

Hadron Spectra, Decays and Scattering Properties Within Basis Light Front Quantization

NASA Astrophysics Data System (ADS)

Vary, James P.; Adhikari, Lekha; Chen, Guangyao; Jia, Shaoyang; Li, Meijian; Li, Yang; Maris, Pieter; Qian, Wenyang; Spence, John R.; Tang, Shuo; Tuchin, Kirill; Yu, Anji; Zhao, Xingbo

2018-07-01

We survey recent progress in calculating properties of the electron and hadrons within the basis light front quantization (BLFQ) approach. We include applications to electromagnetic and strong scattering processes in relativistic heavy ion collisions. We present an initial investigation into the glueball states by applying BLFQ with multigluon sectors, introducing future research possibilities on multi-quark and multi-gluon systems.

Multi-stage approach for structural damage detection problem using basis pursuit and particle swarm optimization

NASA Astrophysics Data System (ADS)

Gerist, Saleheh; Maheri, Mahmoud R.

2016-12-01

In order to solve structural damage detection problem, a multi-stage method using particle swarm optimization is presented. First, a new spars recovery method, named Basis Pursuit (BP), is utilized to preliminarily identify structural damage locations. The BP method solves a system of equations which relates the damage parameters to the structural modal responses using the sensitivity matrix. Then, the results of this stage are subsequently enhanced to the exact damage locations and extents using the PSO search engine. Finally, the search space is reduced by elimination of some low damage variables using micro search (MS) operator embedded in the PSO algorithm. To overcome the noise present in structural responses, a method known as Basis Pursuit De-Noising (BPDN) is also used. The efficiency of the proposed method is investigated by three numerical examples: a cantilever beam, a plane truss and a portal plane frame. The frequency response is used to detect damage in the examples. The simulation results demonstrate the accuracy and efficiency of the proposed method in detecting multiple damage cases and exhibit its robustness regarding noise and its advantages compared to other reported solution algorithms.

Planning additional drilling campaign using two-space genetic algorithm: A game theoretical approach

NASA Astrophysics Data System (ADS)

Kumral, Mustafa; Ozer, Umit

2013-03-01

Grade and tonnage are the most important technical uncertainties in mining ventures because of the use of estimations/simulations, which are mostly generated from drill data. Open pit mines are planned and designed on the basis of the blocks representing the entire orebody. Each block has different estimation/simulation variance reflecting uncertainty to some extent. The estimation/simulation realizations are submitted to mine production scheduling process. However, the use of a block model with varying estimation/simulation variances will lead to serious risk in the scheduling. In the medium of multiple simulations, the dispersion variances of blocks can be thought to regard technical uncertainties. However, the dispersion variance cannot handle uncertainty associated with varying estimation/simulation variances of blocks. This paper proposes an approach that generates the configuration of the best additional drilling campaign to generate more homogenous estimation/simulation variances of blocks. In other words, the objective is to find the best drilling configuration in such a way as to minimize grade uncertainty under budget constraint. Uncertainty measure of the optimization process in this paper is interpolation variance, which considers data locations and grades. The problem is expressed as a minmax problem, which focuses on finding the best worst-case performance i.e., minimizing interpolation variance of the block generating maximum interpolation variance. Since the optimization model requires computing the interpolation variances of blocks being simulated/estimated in each iteration, the problem cannot be solved by standard optimization tools. This motivates to use two-space genetic algorithm (GA) approach to solve the problem. The technique has two spaces: feasible drill hole configuration with minimization of interpolation variance and drill hole simulations with maximization of interpolation variance. Two-space interacts to find a minmax solution

Numerical simulation of deformation and failure processes of a complex technical object under impact loading

NASA Astrophysics Data System (ADS)

Kraus, E. I.; Shabalin, I. I.; Shabalin, T. I.

2018-04-01

The main points of development of numerical tools for simulation of deformation and failure of complex technical objects under nonstationary conditions of extreme loading are presented. The possibility of extending the dynamic method for construction of difference grids to the 3D case is shown. A 3D realization of discrete-continuum approach to the deformation and failure of complex technical objects is carried out. The efficiency of the existing software package for 3D modelling is shown.

Analysis of plant germline development by high-throughput RNA profiling: technical advances and new insights.

PubMed

Schmidt, Anja; Schmid, Marc W; Grossniklaus, Ueli

2012-04-01

Reproduction is a crucial step in the life cycle of plants. The male and female germline lineages develop in the reproductive organs of the flower, which in higher plants are the anthers and ovules, respectively. Development of the germline lineage initiates from a dedicated sporophytic cell that undergoes meiosis to form spores that subsequently give rise to the gametophytes through mitotic cell divisions. The mature male and female gametophytes harbour the male (sperm cells) and female gametes (egg and central cell), respectively. Those unite during double fertilization to initiate embryo and endosperm development in sexually reproducing higher plants. While cytological changes involved in development of the germline lineages have been well characterized in a number of species, investigation of the transcriptional basis underlying their development and the specification of the gametes proved challenging. This is largely due to the inaccessibility of the cells constituting the germline lineages, which are enclosed by sporophytic tissues. Only recently, these technical limitations could be overcome by combining new methods to isolate the relevant cells with powerful transcriptional profiling methods, such as microarrays or high-throughput sequencing of RNA. This review focuses on these technical advances and the new insights gained from them concerning the transcriptional basis and molecular mechanisms underlying germline development. © 2012 The Authors. The Plant Journal © 2012 Blackwell Publishing Ltd.

Environmental effects of dredging: Methods for the assessment of the genotoxic effects of environmental contaminants. Glossary and references. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honeycutt, M.E.; Jarvis, A.S.; McFarland, V.A.

1995-07-01

This technical note is the third in a series of three that outline and describe the principal methods that have been developed to test the potential of environmental contaminants to cause mutagenic, carcinogenic, and teratogenic effects. The first in this series (EEDP-04-24) describes methods used to discern genotoxic effects at the sub cellular level, while the second (EEDP-04-25) describes methods used to discern genotoxic effects at the cellular and organ/organism level. Recent literature citations for each topic referenced in this series of technical notes are provided in this technical note, in addition to a glossary of terms. The information inmore » these technical notes is intended to provide Corps of Engineers personnel with a working knowledge of the terminology and conceptual basis of genotoxicity testing. To develop an improved understanding of the concepts of genotoxicity, readers are encouraged to review A Primer in Genotoxicity (Jarvis, Reilly, and Lutz 1993), presented in Volume D-93-3 of the Environmental Effects of Dredging information exchange bulletin.« less

Investigating performance variability of processing, exploitation, and dissemination using a socio-technical systems analysis approach

NASA Astrophysics Data System (ADS)

Danczyk, Jennifer; Wollocko, Arthur; Farry, Michael; Voshell, Martin

2016-05-01

Data collection processes supporting Intelligence, Surveillance, and Reconnaissance (ISR) missions have recently undergone a technological transition accomplished by investment in sensor platforms. Various agencies have made these investments to increase the resolution, duration, and quality of data collection, to provide more relevant and recent data to warfighters. However, while sensor improvements have increased the volume of high-resolution data, they often fail to improve situational awareness and actionable intelligence for the warfighter because it lacks efficient Processing, Exploitation, and Dissemination and filtering methods for mission-relevant information needs. The volume of collected ISR data often overwhelms manual and automated processes in modern analysis enterprises, resulting in underexploited data, insufficient, or lack of answers to information requests. The outcome is a significant breakdown in the analytical workflow. To cope with this data overload, many intelligence organizations have sought to re-organize their general staffing requirements and workflows to enhance team communication and coordination, with hopes of exploiting as much high-value data as possible and understanding the value of actionable intelligence well before its relevance has passed. Through this effort we have taken a scholarly approach to this problem by studying the evolution of Processing, Exploitation, and Dissemination, with a specific focus on the Army's most recent evolutions using the Functional Resonance Analysis Method. This method investigates socio-technical processes by analyzing their intended functions and aspects to determine performance variabilities. Gaps are identified and recommendations about force structure and future R and D priorities to increase the throughput of the intelligence enterprise are discussed.

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

PubMed

Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-03-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP IRON AND STEEL MILL SITES UNDER THE BROWNFIELDS INITIATIVE

EPA Science Inventory

This document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will...

Usefulness of percutaneous intervention with transarterial approach in the salvage of nonmaturing native fistulas status-post transvenous approach failure: transarterial approach in the salvage of nonmaturing native fistulas.

PubMed

Hong, Hyun Pyo; Kim, Seung Kwon

2009-11-01

The purpose of this study was to assess the usefulness of percutaneous intervention with transarterial approach in the salvage of nonmaturing native fistulas status post transvenous approach failure. Eight patients (M:F=2:6; mean age, 56.8 years) underwent percutaneous intervention with antegrade transarterial approach when the retrograde transvenous approach failed. Mean time from fistula creation to fistulography was 80.5 days. Five patients had brachiocephalic fistulas and three had radiocephalic fistulas. Brachial or radial arterial access was performed using real-time ultrasound guidance, and balloon angioplasty was performed for hemodynamically significant (>50%) stenosis. Technical and clinical success and complications were evaluated. Patency following percutaneous intervention was estimated with the Kaplan-Meier method. Technical success was achieved in 87.5% (seven of eight patients). Clinical success of normal hemodialysis (fistula maturation) occurred in 87.5% (seven of eight patients). One minor complication (regional hematoma) occurred in one patient. Mean primary patency at 6, 12, and 18 months was 75%, 56.2%, and 37.5%, respectively. Additional angioplasty (n=3) resulted in mean secondary patency at 12 and 18 months of 87.5% and 87.5% of the patients, respectively. In conclusion, percutaneous intervention with the transarterial approach can be a useful method for salvage of nonmaturing native fistulas when the transvenous approach fails.

International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

PubMed

Varabyova, Yauheniya; Schreyögg, Jonas

2013-09-01

There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.