Typing mineral deposits using their grades and tonnages in an artificial neural network

USGS Publications Warehouse

Singer, Donald A.; Kouda, Ryoichi

2003-01-01

A test of the ability of a probabilistic neural network to classify deposits into types on the basis of deposit tonnage and average Cu, Mo, Ag, Au, Zn, and Pb grades is conducted. The purpose is to examine whether this type of system might serve as a basis for integrating geoscience information available in large mineral databases to classify sites by deposit type. Benefits of proper classification of many sites in large regions are relatively rapid identification of terranes permissive for deposit types and recognition of specific sites perhaps worthy of exploring further.Total tonnages and average grades of 1,137 well-explored deposits identified in published grade and tonnage models representing 13 deposit types were used to train and test the network. Tonnages were transformed by logarithms and grades by square roots to reduce effects of skewness. All values were scaled by subtracting the variable's mean and dividing by its standard deviation. Half of the deposits were selected randomly to be used in training the probabilistic neural network and the other half were used for independent testing. Tests were performed with a probabilistic neural network employing a Gaussian kernel and separate sigma weights for each class (type) and each variable (grade or tonnage).Deposit types were selected to challenge the neural network. For many types, tonnages or average grades are significantly different from other types, but individual deposits may plot in the grade and tonnage space of more than one type. Porphyry Cu, porphyry Cu-Au, and porphyry Cu-Mo types have similar tonnages and relatively small differences in grades. Redbed Cu deposits typically have tonnages that could be confused with porphyry Cu deposits, also contain Cu and, in some situations, Ag. Cyprus and kuroko massive sulfide types have about the same tonnages. Cu, Zn, Ag, and Au grades. Polymetallic vein, sedimentary exhalative Zn-Pb, and Zn-Pb skarn types contain many of the same metals. Sediment

easyCBM® Reading Criterion Related Validity Evidence: Grades 2-5. Technical Report #1310

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade 2-5 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Gates-MacGinitie Reading Tests and the Dynamic…

Mapping Weathering and Alteration Minerals in the Comstock and Geiger Grade Areas using Visible to Thermal Infrared Airborne Remote Sensing Data

NASA Technical Reports Server (NTRS)

Vaughan, Greg R.; Calvin, Wendy M.

2005-01-01

To support research into both precious metal exploration and environmental site characterization a combination of high spatial/spectral resolution airborne visible, near infrared, short wave infrared (VNIR/SWIR) and thermal infrared (TIR) image data were acquired to remotely map hydrothermal alteration minerals around the Geiger Grade and Comstock alteration regions, and map the mineral by-products of weathered mine dumps in Virginia City. Remote sensing data from the Airborne Visible Infrared Imaging Spectrometer (AVIRIS), SpecTIR Corporation's airborne hyperspectral imager (HyperSpecTIR), the MODIS-ASTER airborne simulator (MASTER), and the Spatially Enhanced Broadband Array Spectrograph System (SEBASS) were acquired and processed into mineral maps based on the unique spectral signatures of image pixels. VNIR/SWIR and TIR field spectrometer data were collected for both calibration and validation of the remote data sets, and field sampling, laboratory spectral analyses and XRD analyses were made to corroborate the surface mineralogy identified by spectroscopy. The resulting mineral maps show the spatial distribution of several important alteration minerals around each study area including alunite, quartz, pyrophyllite, kaolinite, montmorillonite/muscovite, and chlorite. In the Comstock region the mineral maps show acid-sulfate alteration, widespread propylitic alteration and extensive faulting that offsets the acid-sulfate areas, in contrast to the larger, dominantly acid-sulfate alteration exposed along Geiger Grade. Also, different mineral zones within the intense acid-sulfate areas were mapped. In the Virginia City historic mining district the important weathering minerals mapped include hematite, goethite, jarosite and hydrous sulfate minerals (hexahydrite, alunogen and gypsum) located on mine dumps. Sulfate minerals indicate acidic water forming in the mine dump environment. While there is not an immediate threat to the community, there are clearly sources of

Study of the Reliability of CCSS-Aligned Math Measures (2012 Research Version): Grades 6-8. Technical Report #1312

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we describe the results of a study of mathematics items written to align with the Common Core State Standards (CCSS) in grades 6-8. In each grade, CCSS items were organized into forms, and the reliability of these forms was evaluated along with an experimental form including items aligned with the National Council of…

Mineral deposit densities for estimating mineral resources

USGS Publications Warehouse

Singer, Donald A.

2008-01-01

Estimates of numbers of mineral deposits are fundamental to assessing undiscovered mineral resources. Just as frequencies of grades and tonnages of well-explored deposits can be used to represent the grades and tonnages of undiscovered deposits, the density of deposits (deposits/area) in well-explored control areas can serve to represent the number of deposits. Empirical evidence presented here indicates that the processes affecting the number and quantity of resources in geological settings are very general across many types of mineral deposits. For podiform chromite, porphyry copper, and volcanogenic massive sulfide deposit types, the size of tract that geologically could contain the deposits is an excellent predictor of the total number of deposits. The number of mineral deposits is also proportional to the type’s size. The total amount of mineralized rock is also proportional to size of the permissive area and the median deposit type’s size. Regressions using these variables provide a means to estimate the density of deposits and the total amount of mineralization. These powerful estimators are based on analysis of ten different types of mineral deposits (Climax Mo, Cuban Mn, Cyprus massive sulfide, Franciscan Mn, kuroko massive sulfide, low-sulfide quartz-Au vein, placer Au, podiform Cr, porphyry Cu, and W vein) from 108 permissive control tracts around the world therefore generalizing across deposit types. Despite the diverse and complex geological settings of deposit types studied here, the relationships observed indicate universal controls on the accumulation and preservation of mineral resources that operate across all scales. The strength of the relationships (R 2=0.91 for density and 0.95 for mineralized rock) argues for their broad use. Deposit densities can now be used to provide a guideline for expert judgment or used directly for estimating the number of most kinds of mineral deposits.

Technical and Economic Feasibility Study of At-Grade Concrete Slab Track for Urban Rail Transit Systems

DOT National Transportation Integrated Search

1981-08-01

The report presents work conducted to evaluate the technical and economic feasibility of using concrete slab track systems for at-grade transit track. The functions of a rail transit track system are to guide railway vehicles and provide a safe and a...

ECONOMICS AND THE SEARCH FOR OFFSHORE HEAVY MINERAL DEPOSITS.

USGS Publications Warehouse

Attanasi, E.D.; DeYoung, J.H.

1987-01-01

This paper examines the relative importance, in terms of a deposit's commercial status, of physical characteristics of onshore titanium-bearing heavy-mineral placer deposits, and applies these findings to the search for and evaluation of offshore deposits. Results obtained by applying statistical discriminant analysis show that the characteristics most useful for predicting a deposit's commercial status are the grades of the constituent titanium minerals and the size of the deposit. Heavy-mineral grade or even the combined grades of all titanium-bearing minerals (without information and constituent mineral grades) are inferior predictors of a deposit's commercial status. When data from homogeneous regions are analyzed separately, the ability to accurately predict the deposit's commerical status improves.

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 5. Technical Report #1204

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fifth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 2. Technical Report #1201

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the second-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 4. Technical Report #1203

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fourth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 6. Technical Report #1205

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the sixth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 7. Technical Report #1206

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the seventh-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 3. Technical Report #1202

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Park, Bitnara Jasmine; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the third-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Internal Consistency of the easyCBM© CCSS Reading Measures: Grades 3-8. Technical Report #1407

ERIC Educational Resources Information Center

Guerreiro, Meg; Alonzo, Julie; Tindal, Gerald

2014-01-01

This technical report documents findings from a study of the internal consistency and split-half reliability of the easyCBM© CCSS Reading measures, grades 3-8. Data, drawn from an extant data set gathered in school year 2013-2014, include scores from over 150,000 students' fall and winter benchmark assessments. Findings suggest that the easyCBM©…

Functional variables associated with the clinical grade of dyspnoea in coal miners with pneumoconiosis and mild bronchial obstruction.

PubMed

Bauer, T T; Schultze-Werninghaus, G; Kollmeier, J; Weber, A; Eibel, R; Lemke, B; Schmidt, E W

2001-12-01

Dyspnoea is a common symptom in coal miners with pneumoconiosis. Among others, gas exchange disturbances due to airway obstruction or mismatch between ventilation and perfusion may be underlying mechanisms. The validation of dyspnoea by the degree of airway obstruction is controversial, because the extent of airway obstruction often does not correlate with the clinical grade of breathlessness. The association was investigated between breathlessness (self reported, on a six point scale) and indices of submaximal spiroergometry in 66 coal workers with radiographically confirmed pneumoconiosis (International Labour Organisation (ILO) grade of profusion > or =1/0, mean (SD) age 64 (5.5) years, mean (SD) forced expired volume in 1 second (FEV(1)) 77.5 (22.9) % predicted). The clinical degree of breathlessness was independently associated with minute ventilation/oxygen consumption (VE/VO(2)) ratio (beta 0.423, 95% confidence interval (95% CI) 0.18 to 0.67, p=0.001) and smoking (beta 0.318, 95% CI 0.21 to 1.79, p=0.014) in a multiple linear regression analysis. The VE/VO(2) ratio (beta 0.556, 95% CI 0.20 to 0.90, p=0.003) was also the best predictor of breathlessness when only coal miners with airway obstruction (FEV(1) < 80% predicted) were analyzed. The VE/VO(2) ratio as a measurement of mismatch between ventilation and perfusion predicted the clinical grade of breathlessness better than measurements of bronchial obstruction at rest in coal workers with pneumoconiosis.

Comprehensive recovery of gold and base-metal sulfide minerals from a low-grade refractory ore

NASA Astrophysics Data System (ADS)

Li, Wen-juan; Liu, Shuang; Song, Yong-sheng; Wen, Jian-kang; Zhou, Gui-ying; Chen, Yong

2016-12-01

The comprehensive recovery of small amounts of valuable minerals such as gold and base-metal sulfide minerals from a low-grade refractory ore was investigated. The following treatment strategy was applied to a sample of this ore: gold flotation-gold concentrate leaching-lead and zinc flotation from the gold concentrate leaching residue. Closed-circuit trials of gold flotation yielded a gold concentrate that assayed at 40.23 g·t-1 Au with a recovery of 86.25%. The gold concentrate leaching rate was 98.76%. Two variants of lead-zinc flotation from the residue—preferential flotation of lead and zinc and bulk flotation of lead and zinc—were tested using the middling processing method. Foam from the reflotation was returned to the lead rougher flotation or lead-zinc bulk flotation, whereas middlings from reflotation were discarded. Sulfur concentrate was a byproduct. The combined strategy of flotation, leaching, and flotation is recommended for the treatment of this kind of ore.

Examining the Internal Structure of the easyCBM Reading Measures, Grades K-5. Technical Report #1302

ERIC Educational Resources Information Center

Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2013-01-01

In this technical report, we describe a study examining the internal structures of the easyCBM reading measures, Grades K-5. Data were gathered from a convenience sample of 114 Kindergarten students, 43 first graders, 82 second graders, 100 third graders, 109 fourth graders, and 71 fifth graders attending schools in Oregon, Georgia, South…

A Health Assessment of Technical Grade Dinitrotoluene ...

EPA Pesticide Factsheets

Technical grade dinitrotoluene (tgDNT) is a mixture of dinitrotoluene isomers. It is composed of 76% 2,4 DNT and 19% 2,6 DNT with the remaining 5% a combination of the other four dinitrotoluene isomers (2,3 , 2,5 , 3,4 , and 3,5 DNT). The toxicological effects of tgDNT were reviewed and the critical effects were identified by evaluating available human occupational and animal studies mainly via inhalation and oral exposure routes. In occupational studies of workers from DNT manufacturing plants, tgDNT exposure (predominately via the inhalation route) associates with clinical symptoms, adverse reproductive effects, and adverse effects on the cardiovascular system. However, these occupational studies are limited due to co-exposure to other known and/or unknown chemicals and lack of useful exposure information. Oral studies in F344 rats showed that tgDNT has a broad toxicity profile in both males and females including significantly increased reticulocytes and Heinz bodies, increased relative liver weight and kidney weight, spleen hemosiderin and extramedullary hematopoiesis, increased incidence of chronic interstitial nephritis, and hepatotoxicity characterized by increased incidences of hepatocyte necrosis, hyperbasophilic hepatocytes, and hepatocyte megalocytosis . The incidence of testicular degeneration in male rats is also significantly increased by tgDNT. In order to identify the most sensitive non-cancer effect(s), all toxicological endpoints from subchron

43 CFR 9269.3-3 - Minerals management.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Minerals management. 9269.3-3 Section 9269... MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) LAW ENFORCEMENT-CRIMINAL Technical Services § 9269.3-3 Minerals management. (a) Oil and gas leasing. [Reserved] (b) Geothermal resources leasing...

43 CFR 9269.3-3 - Minerals management.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Minerals management. 9269.3-3 Section 9269... MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) LAW ENFORCEMENT-CRIMINAL Technical Services § 9269.3-3 Minerals management. (a) Oil and gas leasing. [Reserved] (b) Geothermal resources leasing...

43 CFR 9269.3-3 - Minerals management.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Minerals management. 9269.3-3 Section 9269... MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) LAW ENFORCEMENT-CRIMINAL Technical Services § 9269.3-3 Minerals management. (a) Oil and gas leasing. [Reserved] (b) Geothermal resources leasing...

43 CFR 9269.3-3 - Minerals management.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Minerals management. 9269.3-3 Section 9269... MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) LAW ENFORCEMENT-CRIMINAL Technical Services § 9269.3-3 Minerals management. (a) Oil and gas leasing. [Reserved] (b) Geothermal resources leasing...

Focus on Mentee-Mentor Relationships: The 10th Grade Implementation of iMentor's College Ready Program. Technical Appendices

ERIC Educational Resources Information Center

Merrill, Lisa; Kang, David; Siman, Nina; Soltani, Jasmine

2016-01-01

This document presents the technical appendices that accompany the full report entitled:"Focus on Mentee-Mentor Relationships: The 10th Grade Implementation of iMentor's College Ready Program." The appendices include: (1) Mentor Survey Construct Items; (2) Qualative Data Collection and Analysis Methods; and (3) Methods for Estimating the…

Mineral resource of the month: vermiculite

USGS Publications Warehouse

Potter, M.J.

2008-01-01

Vermiculite, a hydrated magnesium-aluminum-iron silicate mineral, has a range of uses that take advantage of its fire resistance, good insulating properties, high liquid absorption capacity, inertness and low density. Most applications for vermiculite use an exfoliated (heat-expanded) form of the mineral. In general, coarser grades of vermiculite are used as loose fill insulation and in horticulture. Finer grades are used in wallboard and plasters and for animal feeds and fertilizers.

Feasibility Studies for Production of Pellet Grade Concentrate from Sub Grade Iron Ore Using Multi Gravity Separator

NASA Astrophysics Data System (ADS)

Rao, Gottumukkala Venkateswara; Markandeya, R.; Kumar, Rajan

2018-04-01

An attempt has been made to utilise Sub Grade Iron Ore by producing pellet grade concentrate from Deposit 5, Bacheli Complex, Bailadila, Chhattisgarh, India. The `as received' Run of Mine (ROM) sample assayed 40.80% Fe, 40.90% SiO2. Mineralogical studies indicated that the main ore mineral is Hematite and lone gangue mineral is Quartz. Mineral liberation studies indicated that, the ore mineral Hematite and gangue mineral Quartz are getting liberated below 100 microns. The stage crushed and ground sample was subjected to concentration by using a Multi Gravity Separator (MGS). Rougher Multi Gravity Separation (MGS) experimental results were optimised to recover highest possible iron values. A concentrate of 55.80% Fe with a yield of 61.73% by weight with a recovery of 84.42% Iron values was obtained in rougher MGS concentrate. Further experiments were carried out with rougher MGS concentrate to produce a concentrate suitable for commercial grade pellet concentrate. It was proved that a concentrate assaying 66.67% Fe, 3.12% SiO2 with an yield of 45.08% by weight and with a recovery of 73.67% iron values in the concentrate.

30 CFR 7.404 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Technical requirements. 7.404 Section 7.404 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND... Cable Splice Kits § 7.404 Technical requirements. (a) Electric cables and splices shall be flame...

Functional variables associated with the clinical grade of dyspnoea in coal miners with pneumoconiosis and mild bronchial obstruction

PubMed Central

Bauer, T; Schultze-Werningh..., G; Kollmeier, J; Weber, A; Eibel, R; Lemke, B; Schmidt, E

2001-01-01

OBJECTIVES—Dyspnoea is a common symptom in coal miners with pneumoconiosis. Among others, gas exchange disturbances due to airway obstruction or mismatch between ventilation and perfusion may be underlying mechanisms. The validation of dyspnoea by the degree of airway obstruction is controversial, because the extent of airway obstruction often does not correlate with the clinical grade of breathlessness.
METHODS—The association was investigated between breathlessness (self reported, on a six point scale) and indices of submaximal spiroergometry in 66 coal workers with radiographically confirmed pneumoconiosis (International Labour Organisation (ILO) grade of profusion ⩾1/0, mean (SD) age 64 (5.5) years, mean (SD) forced expired volume in 1 second (FEV1) 77.5 (22.9) % predicted).
RESULTS—The clinical degree of breathlessness was independently associated with minute ventilation/oxygen consumption (V̇E/V̇O2) ratio (β 0.423, 95% confidence interval (95% CI) 0.18 to 0.67, p=0.001) and smoking (β 0.318, 95% CI 0.21 to 1.79, p=0.014) in a multiple linear regression analysis. The V̇E/V̇O2 ratio (β 0.556, 95% CI 0.20 to 0.90, p=0.003) was also the best predictor of breathlessness when only coal miners with airway obstruction (FEV1 < 80% predicted) were analyzed.
CONCLUSION—The V̇E/V̇O2 ratio as a measurement of mismatch between ventilation and perfusion predicted the clinical grade of breathlessness better than measurements of bronchial obstruction at rest in coal workers with pneumoconiosis.


Keywords: coal workers' pneumoconiosis; bronchial obstruction; ventilation PMID:11706146

Technical Subjects. Mathematics. Science. Curriculum RP-27.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto.

GRADES OR AGES: Grades 9-12. SUBJECT MATTER: Technical subjects and special mathematics and science courses for technical students. Technical subjects include air conditioning, auto mechanics, carpentry, drafting, applied electronics, masonry, painting, plumbing, service station operation, welding, and woodworking. ORGANIZATION AND PHYSICAL…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 2. Technical Report # 0920

ERIC Educational Resources Information Center

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 7. Technical Report 0908

ERIC Educational Resources Information Center

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

Improvement in grade of minerals using simultaneous Bio-oxidation of invisible gold concentrate and deep-sea manganese crust

NASA Astrophysics Data System (ADS)

Myung, EunJi; Cho, Kang Hee; Kim, Hyun Soo; Park, Cheon Young

2016-04-01

Many sulfides of metal such as galena, sphalerite, chalcopyrite, and pyrite, are semiconductors. When two kinds of such minerals contact each other in an electrolyte, a galvanic couple, where the mineral of lower rest potential as anode, and that of higher rest potential as cathode forms. Manganese dioxide is also a semiconductor with much higher rest potential than all sulfides mentioned above, so that a galvanic couple in which both the minerals would dissolve simultaneously can form, when it contacts with any of the sulfides. The aim of this study was to investigate the improvement in grade of minerals using the simultaneous bio-oxidation of deep-sea manganese crust and invisible gold concentrate. The samples(deep-sea manganese crust and invisible gold concentrate) were characterized by chemical and XRD analysis. The primary components of the invisible gold concentrate was pyrite and quartz and the deep-sea manganese crust was amorphous material, as detected using XRD. The result of chemical analysis showed that Au, Ag, Te contents in the invisible gold concentrate 130.2, 954.1 and 1,043.6 mg/kg, respectively. and that Mn, Ni, Co contents in the deep-sea manganese crust 19,501.5, 151.9, 400.4 mg/kg, respectively. In order to increase the bacteria's tolerance of heavy metals, the bacteria using bio-oxidation experiments were repeatedly subcultured in an Cu adaptation-medium containing of 382.98 mg/l for 20 periods of 21 days. The improvement in grade of samples of in present adapted bacteria condition was greater than another conditions(control and in present non-adapted bacteria). The Au-Ag-Te contents in the invisible gold concentrate was enhanced in the order of physical oxidation, simultaneous/non-adaptive bio-oxidation, adaptive/bio-oxidation, simultaneous/adaptive bio-oxidation. If the bacteria is adapted to heavy metal ions and an optimization of conditions is found in future bio-oxidation-leaching processes. Acknowledgment : "This research was supported

Investigating Minerals: Promoting Integrated Inquiry

ERIC Educational Resources Information Center

Thompson, Rudi; Carmack, Elizabeth

2007-01-01

"Mineral Detectives!" is one of eighteen lessons in the "Private Whys?" integrated science unit, which uses a guided inquiry investigation to teach students in grades three through five about the role of minerals in our lives. The University of North Texas developed "Private Whys?" with funding from the Copper…

30 CFR 819.19 - Auger mining: Backfilling and grading.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Auger mining: Backfilling and grading. 819.19 Section 819.19 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE... MINING § 819.19 Auger mining: Backfilling and grading. (a) General. Auger mining shall be conducted in...

easyCBM CCSS Math Item Scaling and Test Form Revision (2012-2013): Grades 6-8. Technical Report #1313

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2012-01-01

The purpose of this technical report is to document the piloting and scaling of new easyCBM mathematics test items aligned with the Common Core State Standards (CCSS) and to describe the process used to revise and supplement the 2012 research version easyCBM CCSS math tests in Grades 6-8. For all operational 2012 research version test forms (10…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 3. Technical Report # 09-02

ERIC Educational Resources Information Center

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 5. Technical Report # 09-01

ERIC Educational Resources Information Center

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 4. Technical Report # 09-03

ERIC Educational Resources Information Center

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 8. Technical Report # 09-04

ERIC Educational Resources Information Center

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

43 CFR 9239.5 - Minerals.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Minerals. 9239.5 Section 9239.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) TRESPASS Kinds of Trespass § 9239.5 Minerals. ...

43 CFR 9239.5 - Minerals.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Minerals. 9239.5 Section 9239.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) TRESPASS Kinds of Trespass § 9239.5 Minerals. ...

43 CFR 9239.5 - Minerals.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Minerals. 9239.5 Section 9239.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) TRESPASS Kinds of Trespass § 9239.5 Minerals. ...

43 CFR 9239.5 - Minerals.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Minerals. 9239.5 Section 9239.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR TECHNICAL SERVICES (9000) TRESPASS Kinds of Trespass § 9239.5 Minerals. ...

Physical deposit measures and commercial potential: The case of titanium-bearing heavy-mineral deposits

USGS Publications Warehouse

Attanasi, E.D.; DeYoung, J.H.

1988-01-01

Physical measures of mineral deposit characteristics, such as grade and tonnage, long have been used in both subjective and analytic models to predict favorability of areas for the occurrence of mineral deposits of particular types. After a deposit has been identified, however, the explorationist must decide whether to continue data collection, begin an economic feasibility study, or abandon the prospect. The decision maker can estimate the probability that a deposit will be commercial by examining physical measures. The amount of sampling data required before such a probability estimate can be considered reliable can be determined. A logit probability model estimated from onshore titanium-bearing heavy-mineral deposit data identifies and quantifies the relative influence of a deposit's physical measures on the chances of the deposit becoming commercial. A principal conclusion that can be drawn from the analysis is that, along with a measure of deposit size, the characteristics most important in predicting commercial potential are grades of the constituent minerals. Total heavy-mineral-bearing sand grade or even total titanium grade (without data on constituent mineral grades) are poor predictors of the deposit's commercial potential. ?? 1988 International Association for Mathematical Geology.

30 CFR 777.13 - Reporting of technical data.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Reporting of technical data. 777.13 Section 777.13 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR... PROGRAMS GENERAL CONTENT REQUIREMENTS FOR PERMIT APPLICATIONS § 777.13 Reporting of technical data. (a) All...

Grain Grading and Handling.

ERIC Educational Resources Information Center

Rendleman, Matt; Legacy, James

This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

Characteristics of mineral nutrition of plants in the bio-technical life support system with human wastes included in mass exchange

NASA Astrophysics Data System (ADS)

Tikhomirova, Natalia; Ushakova, Sofya; Kalacheva, Galina; Tikhomirov, Alexander

2016-09-01

The study addresses the effectiveness of using ion exchange substrates (IES) to optimize mineral nutrition of plants grown in the nutrient solutions containing oxidized human wastes for application in bio-technical life support systems. The study shows that the addition of IES to the root-inhabited substrate is favorable for the growth of wheat vegetative organs but causes a decrease in the grain yield. By contrast, the addition of IES to the nutrient solution does not influence the growth of vegetative organs but favors normal development of wheat reproductive organs. Thus, to choose the proper method of adjusting the solution with IES, one should take into account specific parameters of plant growth and development and the possibility of multiple recycling of IES based on the liquid products of mineralization of human wastes.

Tunability of collagen matrix mechanical properties via multiple modes of mineralization

PubMed Central

Smith, Lester J.; Deymier, Alix C.; Boyle, John J.; Li, Zhen; Linderman, Stephen W.; Pasteris, Jill D.; Xia, Younan; Genin, Guy M.; Thomopoulos, Stavros

2016-01-01

Functionally graded, mineralized collagen tissues exist at soft-to-hard material attachments throughout the body. However, the details of how collagen and hydroxyapatite mineral (HA) interact are not fully understood, hampering efforts to develop tissue-engineered constructs that can assist with repair of injuries at the attachments of soft tissues to bone. In this study, spatial control of mineralization was achieved in collagen matrices using simulated body fluids (SBFs). Based upon previous observations of poor bonding between reconstituted collagen and HA deposited using SBF, we hypothesized that mineralizing collagen in the presence of fetuin (which inhibits surface mineralization) would lead to more mineral deposition within the scaffold and therefore a greater increase in stiffness and toughness compared with collagen mineralized without fetuin. We tested this hypothesis through integrated synthesis, mechanical testing and modelling of graded, mineralized reconstituted collagen constructs. Results supported the hypothesis, and further suggested that mineralization on the interior of reconstituted collagen constructs, as promoted by fetuin, led to superior bonding between HA and collagen. The results provide us guidance for the development of mineralized collagen scaffolds, with implications for bone and tendon-to-bone tissue engineering. PMID:26855755

Mechanical grading of round timber beams

Treesearch

David W. Green; Thomas M. Gorman; James W. Evans; Joseph F. Murphy

2006-01-01

Current procedures used to sort round timber beams into structural grades rely on visual grading methods and property assignments based on modification of clear wood properties. This study provides the technical basis for mechanical grading of 228 mm (9 in.) diameter round timbers. Test results on 225 round Engelmann spruce–alpine fir–lodgepole pine beams demonstrate...

The fate of technical-grade chlordane in mice fed a high-fat diet and its roles as a candidate obesogen.

PubMed

Wang, Dezhen; Wang, Xinru; Zhang, Ping; Wang, Yao; Zhang, Renke; Yan, Jin; Zhou, Zhiqiang; Zhu, Wentao

2017-03-01

Epidemiological studies indicate that exposure to persistent organic pollutants is positively associated with the prevalence of obesity. To delineate the potential role of technical-grade chlordane in obesity development, chlordane metabolism and chlordane-induced metabolic changes were investigated in mice fed high-fat diet (HFD) over a 6-week period. Gas chromatography-electron capture detector analysis showed that HFD induced more accumulation of technical chlordane in the liver, muscle and adipose tissue. The enantioselectivities of oxychlordane in selected tissues were also influenced by HFD. 1 H NMR-based liver metabolome indicated that technical chlordane can enhance the metabolic alterations induced by HFD. Compared with the low-fat diet (LFD) group, no differences were observed in the LFD + chlordane group. However, as many as 16 metabolites were significantly different between the HFD group and HFD + chlordane group. Moreover, compared to the LFD + chlordane group, the abundances of 24 metabolites significantly increased or decreased in the HFD + chlordane group. Twenty metabolites were altered in the HFD group compared to the LFD group. Tryptophan profiling suggested that both chlordane and HFD can disturb tryptophan catabolism. These interactions between technical chlordane and HFD suggest that technical chlordane is a candidate obesogen. Copyright © 2016 Elsevier Ltd. All rights reserved.

Physical, technical, and economic accessibility of resources and reserves need to be distinguished by grade: Application to the case of phosphorus.

PubMed

Springer, Nathaniel P

2017-01-15

The amount of phosphorus in the total environment is finite, yet recent estimates suggest that more than enough phosphate ore resources exist in the lithosphere to meet future increases in demand during the next century. Still, it remains unclear how the accessibility of this resource stock - which is heterogeneous in terms of grade and location - will change as currently accessible resources are utilized, as extraction and processing technologies develop, and as the relative economic costs vary. This study uses an economic framework, the World Trade Model with Rectangular Choice-of-Technology, to link estimates of known geological resources of various grades with the technically and economically accessible reserves. Using the most recent public data on phosphate ore stocks and mining and technological capacity, this study estimates that the ~400,000teragrams (Tg) of known apatite ore (>1% P 2 O 5 content) equate to ~110,000Tg when converted to potential reserves (~30% P 2 O 5 ) using existing technologies, with over half of these remaining potential reserves converted from resources with grades below 20% P 2 O 5 . Corresponding global reserves are estimated at ~70,000Tg using the Rectangular Choice-of-Technology model, but since any reserve estimate is contingent on the state of the world economy, a set of five illustrative scenarios are constructed to show how this estimate can vary between ~67,000 and ~98,000Tg with only a small number of changes to the economic and technical parameters and variables. Calculating accessibility using consistent definitions for resources and reserves while distinguishing between grades not only creates a clearer picture of remaining non-renewable resources, but creates a framework that can be used to explore future geopolitical scenarios about ore availability, extraction technologies, supply networks, and global commodity prices. Copyright © 2016 Elsevier B.V. All rights reserved.

Shock Wave Propagation in Functionally Graded Mineralized Tissue

NASA Astrophysics Data System (ADS)

Nelms, Matthew; Hodo, Wayne; Livi, Ken; Browning, Alyssa; Crawford, Bryan; Rajendran, A. M.

2017-06-01

In this investigation, the effects of shock wave propagation in bone-like biomineralized tissue was investigated. The Alligator gar (Atractosteus spatula) exoskeleton is comprised of many disparate scales that provide a biological analog for potential design of flexible protective material systems. The gar scale is identified as a two-phase, (1) hydroxyapatite mineral and (2) collagen protein, biological composite with two distinct layers where a stiff, ceramic-like ganoine overlays a soft, highly ductile ganoid bone. Previous experimentations has shown significant softening under compressive loading and an asymmetrical stress-strain response for analogous mineralized tissues. The structural features, porosity, and elastic modulus were determined from high-resolution scanning electron microscopy, 3D micro-tomography, and dynamic nanoindentation experiments to develop an idealized computational model for FE simulations. The numerical analysis employed Gurson's yield criterion to determine the influence of porosity and pressure on material strength. Functional gradation of elastic moduli and certain structural features, such as the sawtooth interface, are explicitly modeled to study the plate impact shock profile for a full 3-D analysis using ABAQUS finite element software.

The Problem of Technical Progress and Mineral Resources

ERIC Educational Resources Information Center

Lukashev, Konstantin I.

1974-01-01

Examines the estimates of known potential reserves of the major raw materials, future sources therof, the geological and technological problems associated with these, the manufacture of artifical minerals, and international cooperation in this sphere. (Author/GS)

Coating of Bio-mimetic Minerals-Substituted Hydroxyapatite on Surgical Grade Stainless Steel 316L by Electrophoretic Deposition for Hard tissue Applications

NASA Astrophysics Data System (ADS)

Govindaraj, Dharman; Rajan, Mariappan

2018-02-01

Third-era bio-implant materials intend to empower particular live cell reactions at the atomic level, these materials represented with a resorbable and biocompatibility that bodies recuperate once they have been embedded. Necessitate to decrease expenses in public health services has required the utilization of surgical grade stainless steel (SS 316L) as the most inexpensive choice for orthodontic and orthopaedic implants. 316L SS is one of the broadly used implant biomaterials in orthodontic and orthopaedic surgeries. Yet, frequently those discharge for toxic metal ions is confirm from the implants and hence a second surgery is required will remove those implant material. One approach to managing the discharge of toxic metal ions is to coat the implant substance with bio-mimetic minerals in hydroxyapatite (HA). Bio-mimetic minerals such as magnesium (Mg), strontium (Sr), also zinc (Zn) were revealed with animate bone growth furthermore restrain bone resorption both in vitro and in vivo. The present work deals with the electrophoretic deposition (EPD) for multi minerals substituted hydroxyapatite (M-HA) on the surface treated 316L SS under distinctive temperatures (27°C, (room temperature), 60 and 80°C). The resultant coatings were characterized by FT-IR, XRD, SEM-EDX, adhesion strength and leach out analysis.

Inverse Opal Scaffolds with Gradations in Mineral Content for Spatial Control of Osteogenesis.

PubMed

Zhu, Chunlei; Qiu, Jichuan; Pongkitwitoon, Suphannee; Thomopoulos, Stavros; Xia, Younan

2018-05-30

The design and fabrication of inverse opal scaffolds with gradations in mineral content to achieve spatial control of osteogenesis are described. The gradient in mineral content is established via the diffusion-limited transport of hydroxyapatite nanoparticles in a closely packed lattice of gelatin microbeads. The mineral-graded scaffold has an array of uniform pores and interconnected windows to facilitate efficient transport of nutrients and metabolic wastes, ensuring high cell viability. The graded distribution of mineral content can provide biochemical and mechanical cues for spatially regulating the osteogenic differentiation of adipose-derived stromal cells. This new class of scaffolds holds promise for engineering the interfaces between mineralized and unmineralized tissues. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mineral distributions at the developing tendon enthesis.

PubMed

Schwartz, Andrea G; Pasteris, Jill D; Genin, Guy M; Daulton, Tyrone L; Thomopoulos, Stavros

2012-01-01

Tendon attaches to bone across a functionally graded interface, "the enthesis". A gradient of mineral content is believed to play an important role for dissipation of stress concentrations at mature fibrocartilaginous interfaces. Surgical repair of injured tendon to bone often fails, suggesting that the enthesis does not regenerate in a healing setting. Understanding the development and the micro/nano-meter structure of this unique interface may provide novel insights for the improvement of repair strategies. This study monitored the development of transitional tissue at the murine supraspinatus tendon enthesis, which begins postnatally and is completed by postnatal day 28. The micrometer-scale distribution of mineral across the developing enthesis was studied by X-ray micro-computed tomography and Raman microprobe spectroscopy. Analyzed regions were identified and further studied by histomorphometry. The nanometer-scale distribution of mineral and collagen fibrils at the developing interface was studied using transmission electron microscopy (TEM). A zone (∼20 µm) exhibiting a gradient in mineral relative to collagen was detected at the leading edge of the hard-soft tissue interface as early as postnatal day 7. Nanocharacterization by TEM suggested that this mineral gradient arose from intrinsic surface roughness on the scale of tens of nanometers at the mineralized front. Microcomputed tomography measurements indicated increases in bone mineral density with time. Raman spectroscopy measurements revealed that the mineral-to-collagen ratio on the mineralized side of the interface was constant throughout postnatal development. An increase in the carbonate concentration of the apatite mineral phase over time suggested possible matrix remodeling during postnatal development. Comparison of Raman-based observations of localized mineral content with histomorphological features indicated that development of the graded mineralized interface is linked to endochondral

30 CFR 816.105 - Backfilling and grading: Thick overburden.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Backfilling and grading: Thick overburden. 816...-SURFACE MINING ACTIVITIES § 816.105 Backfilling and grading: Thick overburden. (a) Definition. Thick... surrounding terrain. (b) Performance standards. Where thick overburden occurs within the permit area, the...

Evaluation of open-graded friction course mixture : technical assistance report.

DOT National Transportation Integrated Search

2004-10-01

Open-graded friction course (OGFC) is a porous, gap-graded, predominantly single size aggregate bituminous mixture that contains a high percentage of air voids. The high air void content and the open structure of this mix promote the effective draina...

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 1. Technical Report # 0919

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grade 1. These measures, available as part of easyCBM [TM], an online progress monitoring assessment system, were developed in 2008 and administered to approximately 2800 students from schools…

Cross correlation of chemical profiles in minerals: Technical issues and numerical methods

NASA Astrophysics Data System (ADS)

Probst, Line; Caricchi, Luca; Gander, Martin; Wallace, Glen; Sheldrake, Tom

2017-04-01

Crystals grown in magma reservoirs and develop chemical zoning because of the lack of re-equilibration when thermodynamic conditions change. Therefore, the study of chemical zoning in minerals offers the opportunity to reconstruct the pre-eruptive conditions and the temporal evolution of magma reservoirs. We are building a quantitative method that allows the comparison between zonation patterns within minerals. The aim of this method is to identify if similar crystal have partially similar zonation patterns and thus shared a part of their growth history. Our method is based on the correlation method developed first by G. Wallace and G. Bergantz (2004). Here we present some technical issues linked to the use of a numerical method to compare crystals within their textural context in thin sections. The first issue is related to the acquisition of chemical profiles from images of thin sections (e.g. BSE or cathodoluminescence images). We present a new procedure that significantly improves both image and profile processing. A second issue is related to the random orientation of crystals in a thin section. The software we are building takes in account different orientation of crystals by applying different stretching factors to chemical profiles. Thus the automated selection of the best stretching factor is crucial for the rest of the procedure. The last point is the significance level, the threshold above which the correlation between two profiles is considered as real (and not random). This threshold must also be carefully defined and justified. All these points were studied with statistical analysis and we present results leading to a more reliable and robust method. [1] Wallace, G.S. and Bergantz, G.W., 2004. Constraints on mingling of crystal populations from off-center zoning profiles: A statistical approach. American Mineralogist, vol. 89 (1), pp. 64-73. [2] Wallace, G.S. and Bergantz, G.W., 2004. Reconciling heterogeneity in crystal zoning data: An application of

American Revolution, Fitness, Presidents, U.S., Rocks & Minerals, Spelling, Vocabulary.

ERIC Educational Resources Information Center

Web Feet, 2002

2002-01-01

This annotated subject guide to Web sites for grades K-8 focuses on the American Revolution, fitness, U.S. Presidents, rocks and minerals, spelling, vocabulary, and calendar connections for Women's History Month and other March observations. Specific grade levels are indicated for each annotation. (LRW)

Volcanogenic Massive Sulfide Deposits of the World - Database and Grade and Tonnage Models

USGS Publications Warehouse

Mosier, Dan L.; Berger, Vladimir I.; Singer, Donald A.

2009-01-01

Grade and tonnage models are useful in quantitative mineral-resource assessments. The models and database presented in this report are an update of earlier publications about volcanogenic massive sulfide (VMS) deposits. These VMS deposits include what were formerly classified as kuroko, Cyprus, and Besshi deposits. The update was necessary because of new information about some deposits, changes in information in some deposits, such as grades, tonnages, or ages, revised locations of some deposits, and reclassification of subtypes. In this report we have added new VMS deposits and removed a few incorrectly classified deposits. This global compilation of VMS deposits contains 1,090 deposits; however, it was not our intent to include every known deposit in the world. The data was recently used for mineral-deposit density models (Mosier and others, 2007; Singer, 2008). In this paper, 867 deposits were used to construct revised grade and tonnage models. Our new models are based on a reclassification of deposits based on host lithologies: Felsic, Bimodal-Mafic, and Mafic volcanogenic massive sulfide deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types occur in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment and economists to determine the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience

An Examination of Test-Retest, Alternate Form Reliability, and Generalizability Theory Study of the easyCBM Reading Assessments: Grade 2. Technical Report #1217

ERIC Educational Resources Information Center

Anderson, Daniel; Lai, Cheg-Fei; Park, Bitnara Jasmine; Alonzo, Julie; Tindal, Gerald

2012-01-01

This technical report is one in a series of five describing the reliability (test/retest an alternate form) and G-Theory/D-Study on the easyCBM reading measures, grades 1-5. Data were gathered in the spring of 2011 from the convenience sample of students nested within classrooms at a medium-sized school district in the Pacific Northwest. Due to…

An Examination of Test-Retest, Alternate Form Reliability, and Generalizability Theory Study of the easyCBM Reading Assessments: Grade 1. Technical Report #1216

ERIC Educational Resources Information Center

Anderson, Daniel; Park, Jasmine, Bitnara; Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2012-01-01

This technical report is one in a series of five describing the reliability (test/retest/and alternate form) and G-Theory/D-Study research on the easy CBM reading measures, grades 1-5. Data were gathered in the spring 2011 from a convenience sample of students nested within classrooms at a medium-sized school district in the Pacific Northwest. Due…

An Examination of Test-Retest, Alternate Form Reliability, and Generalizability Theory Study of the easyCBM Reading Assessments: Grade 5. Technical Report #1220

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2012-01-01

This technical report is one in a series of five describing the reliability (test/retest and alternate form) and G-Theory/D-Study research on the easyCBM reading measures, grades 1-5. Data were gathered in the spring of 2011 from a convenience sample of students nested within classrooms at a medium-sized school district in the Pacific Northwest.…

Geology. Grade 6. Anchorage School District Elementary Science Program.

ERIC Educational Resources Information Center

Anchorage School District, AK.

This resource book introduces sixth-grade children to the environment by studying rocks and other geological features. Nine lessons are provided on a variety of topics including: (1) geologic processes; (2) mountain building; (3) weathering; (4) geologic history and time; (5) plate tectonics; (6) rocks and minerals; (7) mineral properties; (8)…

A review of zinc oxide mineral beneficiation using flotation method.

PubMed

Ejtemaei, Majid; Gharabaghi, Mahdi; Irannajad, Mehdi

2014-04-01

In recent years, extraction of zinc from low-grade mining tailings of oxidized zinc has been a matter of discussion. This is a material which can be processed by flotation and acid-leaching methods. Owing to the similarities in the physicochemical and surface chemistry of the constituent minerals, separation of zinc oxide minerals from their gangues by flotation is an extremely complex process. It appears that selective leaching is a promising method for the beneficiation of this type of ore. However, with the high consumption of leaching acid, the treatment of low-grade oxidized zinc ores by hydrometallurgical methods is expensive and complex. Hence, it is best to pre-concentrate low-grade oxidized zinc by flotation and then to employ hydrometallurgical methods. This paper presents a critical review on the zinc oxide mineral flotation technique. In this paper, the various flotation methods of zinc oxide minerals which have been proposed in the literature have been detailed with the aim of identifying the important factors involved in the flotation process. The various aspects of recovery of zinc from these minerals are also dealt with here. The literature indicates that the collector type, sulfidizing agent, pH regulator, depressants and dispersants types, temperature, solid pulp concentration, and desliming are important parameters in the process. The range and optimum values of these parameters, as also the adsorption mechanism, together with the resultant flotation of the zinc oxide minerals reported in the literature are summarized and highlighted in the paper. This review presents a comprehensive scientific guide to the effectiveness of flotation strategy. Copyright © 2013 Elsevier B.V. All rights reserved.

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

30 CFR 777.13 - Reporting of technical data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... descriptions of the methodology used to collect and analyze the data. (b) Technical analyses shall be planned... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reporting of technical data. 777.13 Section 777... PROGRAMS GENERAL CONTENT REQUIREMENTS FOR PERMIT APPLICATIONS § 777.13 Reporting of technical data. (a) All...

Version 3.0 of EMINERS - Economic Mineral Resource Simulator

USGS Publications Warehouse

Duval, Joseph S.

2012-01-01

Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type. The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. Version 3.0 of the EMINERS program is available as this USGS Open-File Report 2004-1344. Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques. The release notes included with this report give more details on changes in EMINERS over the years. EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer personal computers. It does not work on Macintosh computers. For help in using the program in this report, see the "Quick-Start Guide for Version 3.0 of EMINERS-Economic Mineral Resource Simulator" (W.J. Bawiec and G.T. Spanski, 2012, USGS Open-File Report 2009-1057, linked at right). It demonstrates how to execute EMINERS software

Skills Conversion Project: Chapter 18, Mineral Extraction. Final Report.

ERIC Educational Resources Information Center

National Society of Professional Engineers, Washington, DC.

As part of a federal study conducted for the U.S. Department of Labor, the employment potential for displaced aerospace and defense professionals in the area of mineral extraction was examined. Mining and metallurgical engineering, the classical technical disciplines employed in the mineral extraction industry, are supplied from schools…

Mineral resource of the month: fluorspar

USGS Publications Warehouse

,

2010-01-01

The article features the industrial mineral fluorspar, used in the manufacture of fluorochemicals, aluminum and steel. It defines fluorspar as crude or beneficiated material, mined or milled for the non-metallic mineral fluorite or calcium fluoride. Applications of acid-grade fluorspar in the U.S. are presented, including production of hydrofluoric acid for chemical production of refrigerants such as chlorofluorocarbons or CFCs. World demand for fluorspar decreased with the CFC ban in the 1990s, but recovered with the use of hydrofluorocarbons or HFCs.

Structure-mechanics relationships in mineralized tendons.

PubMed

Spiesz, Ewa M; Zysset, Philippe K

2015-12-01

In this paper, we review the hierarchical structure and the resulting elastic properties of mineralized tendons as obtained by various multiscale experimental and computational methods spanning from nano- to macroscale. The mechanical properties of mineralized collagen fibres are important to understand the mechanics of hard tissues constituted by complex arrangements of these fibres, like in human lamellar bone. The uniaxial mineralized collagen fibre array naturally occurring in avian tendons is a well studied model tissue for investigating various stages of tissue mineralization and the corresponding elastic properties. Some avian tendons mineralize with maturation, which results in a graded structure containing two zones of distinct morphology, circumferential and interstitial. These zones exhibit different amounts of mineral, collagen, pores and a different mineral distribution between collagen fibrillar and extrafibrillar space that lead to distinct elastic properties. Mineralized tendon cells have two phenotypes: elongated tenocytes placed between fibres in the circumferential zone and cuboidal cells with lower aspect ratios in the interstitial zone. Interestingly some regions of avian tendons seem to be predestined to mineralization, which is exhibited as specific collagen cross-linking patterns as well as distribution of minor tendon constituents (like proteoglycans) and loss of collagen crimp. Results of investigations in naturally mineralizing avian tendons may be useful in understanding the pathological mineralization occurring in some human tendons. Copyright © 2015 Elsevier Ltd. All rights reserved.

Potential mineral resources, Payette National Forest, Idaho: description and probabilistic estimation

USGS Publications Warehouse

Bookstrom, Arthur A.; Johnson, Bruce R.; Cookro, Theresa M.; Lund, Karen; Watts, Kenneth C.; King, Harley D.; Kleinkopf, Merlin D.; Pitkin, James A.; Sanchez, J. David; Causey, J. Douglas

1998-01-01

The Payette National Forest (PNF), in west-central Idaho, is geologically diverse and contains a wide variety of mineral resources. Mineral deposit types are grouped into locatable, leasable, and salable categories. The PNF has substantial past production and identified resources of locatable commodities, including gold, silver, copper, zinc, tungsten, antimony, mercury, and opal. Minor lignitic coal is the only leasable mineral resource known to be present in the PNF. Resources of salable commodities in the PNF include sand-and-gravel, basalt for crushed-rock aggregate, and minor gypsum. Locatable mineral resources are geographically divided between eastern and western parts of the PNF. The western PNF lies west of the Riggins-to-Cascade highway (US 95 - Idaho 55), and the eastern PNF is east of that highway. The western and eastern parts of the PNF are geologically distinctive and have different types of locatable mineral deposits, so their locatable mineral resources are described separately. Within the western and eastern parts of the PNF, locatable deposit types generally are described in order of decreasing geologic age. An expert panel delineated tracts considered geologically permissive and (or) favorable for the occurrence of undiscovered mineral deposits of types that are known to be present within or near the PNF. The panel also estimated probabilities for undiscovered deposits, and used numerical simulation, based on tonnage-grade distribution models, to derive estimates of in-situ metals contained. These estimates are summarized in terms of mean and median measures of central tendency. Most grade and tonnage distributions appear to be log-normal, with the median lower than the mean. Inasmuch as the mean is influenced by the largest deposits in the model tonnage-grade distribution, the median provides a lower measure of central tendency and a more conservative estimation of undiscovered resources.

Very low-grade metamorphic rocks in some representative districts in Tibet

NASA Astrophysics Data System (ADS)

Bi, X.; Mo, X.

2011-12-01

*Response author: Bi,Xianmei,bixm10@sina.com Very low grade metamorphic rocks are widely distributed in Tibet, providing an insight into deformation and metamorphism during the evolution of the Tibetan Plateau. Eighty five Samples of clay mineral-bearing rocks has been collected from various strata including D, P1, T1, T2, T3, J1, J3, K1, K2 and N strata in the Qiangtang terrane, the Gangdese, the Yarlung Zangbo suture and the Tethyan Himalaya. Analyses and refining of clay minerals in samples have been conducted in the Laboratory of X-ray Diffraction, Institute of Petroleum Exploration. Index of illite crystallinity (Ic) along with average thickness of crystal layers of illite, reflectivity of vitrinite and of clay mineral association have been employed as indicators of degree of very low-grade metamorphism. The scheme of classification[1,2] of very-low grade metamorphism based on clay mineral indexes ( mainly index of illite crystallinity) has been used in the present work, that is, low metamorphism (Ic<0.25), higher very-low grade metamorphism (Ic = 0.25-0.30), lower very-low grade metamorphism (Ic = 0.30-0.42) and diagenesis (Ic>0.42). The analytical results show interesting information. In the Qiangtang terrane, clay minerals in the Jurassic strata have indexes of illite crystalinity (Ic) 0.47-0.70, indicating higher diagenesis and in favor of petroleum-generation. However, index of illite crystalinity (Ic) for the Devonian is 0.23, indicating low metamorphism. Indexes of illite crystalinity (Ic) for the J-K strata in middle Gangdese are mostly 0.37-0.25 (very-low grade metamorphism) and a few 0.78-0.48 (diagenesis). Indexes of illite crystalinity (Ic) for the C-P strata in eastern Gangdese are mostly 0.25-0.42 (very-low grade metamorphism) and a few 0.20-0.25 (low metamorphism). The Mesozoic and Cenozoic magmatism and related mineralization are very strong in the Gangdese, which may affect in some extent on indexes of illite crystalinity. In Tethyan Himalaya

Raman spectroscopy for grading of live osteosarcoma cells.

PubMed

Chiang, Yi-Hung; Wu, Stewart H; Kuo, Yi-Chun; Chen, How-Foo; Chiou, Arthur; Lee, Oscar K

2015-04-18

Osteosarcoma is the most common primary malignant bone tumor, and the grading of osteosarcoma cells relies on traditional histopathology and molecular biology methods, which require RNA extraction, protein isolation and immunohistological staining. All these methods require cell isolation, lysis or fixation, which is time-consuming and requires certain amount of tumor specimen. In this study, we report the use of Raman spectroscopy for grading of malignant osteosarcoma cells. We demonstrate that, based on the detection of differential production of mineral species, Raman spectroscopy can be used as a live cell analyzer to accurately assess the grades of osteosarcoma cells by evaluating their mineralization levels. Mineralization level was assessed by measuring amount of hydroxyapatite (HA), which is highly expressed in mature osteoblasts, but not in poorly differentiated osteosarcoma cell or mesenchymal stem cells, the putative cell-of-origin of osteosarcoma. We found that under Raman spectroscopy, the level of HA production was high in MG-63 cells, which are low-grade. Moreover, hydroxyapatite production was low in high-grade osteosarcoma cells such as 143B and SaOS2 cells (p < 0.05). Matrix metalloproteinase MMP2, MMP9 were highly expressed in SaOS2, 143B and MSCs and decreased in human fetal osteoblast (FOB) and MG-63 cells as expected (p < 0.05). These results may highlight the inverse correlation between HA level and prognosis of osteosarcoma. The use of Raman spectroscopy for the measurement of HA production by the protocol reported in this study may serve as a useful tool to rapidly and accurately assess the degree of malignancy in osteosarcoma cells in a label-free manner. Such application may shorten the period of pathological diagnosis and may benefit patients who are inflicted with osteosarcoma.

Main types of rare-metal mineralization in Karelia

NASA Astrophysics Data System (ADS)

Ivashchenko, V. I.

2016-03-01

Rare-metal mineralization in Karelia is represented by V, Be, U deposits and In, Re, Nb, Ta, Li, Ce, La, and Y occurrences, which are combined into 17 types of magmatic, pegmatite, albitite-greisen, hydrothermal-metasomatic, sedimentary, and epigenetic groups. The main vanadium resources are localized in the Onega ore district. These are deposits of the Padma group (556 kt) and the Pudozhgorsky complex (1.5 Mt). The REE occurrences are primarily characterized by Ce-La specialization. The perspective of HREE is related to the Eletozero-Tiksheozero alkaline and Salmi anorthosite-rapakivi granite complexes. Rare-metal pegmatites bear complex mineralization with insignificant low-grade resources. The Lobash and Jalonvaara porphyry Cu-Mo deposits are potential sources of rhenium: Re contents in molybdenite are 20-70 and 50-246 ppm and hypothetical resources are 12 and 7.5 t, respectively. The high-grade (˜100 ppm) and metallogenic potential of indium (˜2400 t) make the deposits of the Pitkäranta ore district leading in the category of Russian ore objects most prospective for indium. Despite the diverse rare-metal mineralization known in Karelia, the current state of this kind of mineral commodities at the world market leaves real metallogenic perspective only for V, U, Re, In, and Nb.

Porphyry copper deposits of the world: database, map, and grade and tonnage models

USGS Publications Warehouse

Singer, Donald A.; Berger, Vladimir Iosifovich; Moring, Barry C.

2005-01-01

Mineral deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types are significantly different, and (2) many types occur in different geologic settings that can be identified from geologic maps. Mineral deposit models are the keystone in combining the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Too few thoroughly explored mineral deposits are available in most local areas for reliable identification of the important geoscience variables or for robust estimation of undiscovered deposits-thus we need mineral-deposit models. Globally based deposit models allow recognition of important features because the global models demonstrate how common different features are. Well-designed and -constructed deposit models allow geologists to know from observed geologic environments the possible mineral deposit types that might exist, and allow economists to determine the possible economic viability of these resources in the region. Thus, mineral deposit models play the central role in transforming geoscience information to a form useful to policy makers. The foundation of mineral deposit models is information about known deposits-the purpose of this publication is to make this kind of information available in digital form for porphyry copper deposits. This report is an update of an earlier publication about porphyry copper deposits. In this report we have added 84 new porphyry copper deposits and removed 12 deposits. In addition, some errors have been corrected and a number of deposits have had some information, such as grades, tonnages, locations, or ages revised. This publication contains a computer file of information on porphyry copper deposits from around the world. It also presents new grade and tonnage models for porphyry copper deposits and for three subtypes of porphyry copper

An Examination of Test-Retest, Alternate Form Reliability, and Generalizability Theory Study of the easyCBM Passage Reading Fluency Assessments: Grade 4. Technical Report #1219

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

This technical report is one in a series of five describing the reliability (test/retest and alternate form) and G-Theory/D-Study research on the easyCBM reading measures, grades 1-5. Data were gathered in the spring of 2011 from a convenience sample of students nested within classrooms at a medium-sized school district in the Pacific Northwest.…

Mineralogic correlates of fibrosis in chrysotile miners and millers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Churg, A.; Wright, J.L.; DePaoli, L.

1989-04-01

To determine which mineral parameters relate to the degree of interstitial fibrosis (asbestosis) in the lungs of chrysotile miners and millers, we graded fibrosis histologically and correlated fibrosis grades with fiber concentration and mean size, surface area, and mass, and with total sample fiber length, surface area, and mass in 21 cases. A positive correlation of fibrosis grade with tremolite concentration and a lesser correlation with chrysotile concentration was found for whole lungs, specific sites within lungs, and, for tremolite, single microscopic fields. No correlations were found for measures of chrysotile fiber size, surface area, or mass, but tremolite meanmore » fiber length, aspect ratio, and surface area were, surprisingly, negatively correlated with fibrosis grade. Measures based on total rather than on mean case or site parameters failed to show correlations with fibrosis. We conclude that: (1) degree of pulmonary fibrosis reflects fiber concentration at both a bulk and a microscopic level; (2) mean fiber length and parameters related to mean fiber length also correlate with fibrosis grade, but, contrary to predictions from animal studies, this correlation is negative, suggesting that short fibers may be more important in the genesis of pulmonary fibrosis than is commonly believed; (3) there is no evidence that parameters such as total fiber length, surface area, or mass provide predictors of degree of fibrosis.« less

A review of silver-rich mineral deposits and their metallogeny

USGS Publications Warehouse

Graybeal, Frederick T.; Vikre, Peter

2010-01-01

Mineral deposits with large inventories or high grades of silver are found in four genetic groups: (1) volcanogenic massive sulfide (VMS), (2) sedimentary exhalative (SEDEX), (3) lithogene, and, (4) magmatichydrothermal. Principal differences between the four groups relate to source rocks and regions, metal associations, process and timing of mineralization, and tectonic setting. These four groups may be subdivided into specific metal associations on ternary diagrams based on relative metal contents. The VMS deposits rarely contain more than 15,600 t Ag (500 Moz). Grades average 33 g/t Ag. Variable Ag- Pb-Zn-Cu-Au ± Sn concentrations are interpreted as having been derived both from shallow plutons and by leaching of the volcanic rock pile in regions of thin or no continental crust and the mineralization is syngenetic. Higher silver grades are associated with areas of abundant felsic volcanic rocks. The SEDEX deposits rarely contain more than 15,600 t Ag (500 Moz). Grades average 46 g/t Ag. Silver, lead, and zinc in relatively consistent proportions are leached from sedimentary rocks filling rift-related basins, where the continental crust is thin, and deposited as syngenetic to diagenetic massive sulfides. Pre-mineral volcanic rocks and their detritus may occur deep within the basin and gold is typically absent. Lithogene silver-rich deposits are epigenetic products of varying combinations of compaction, dewatering, meteoric water recharge, and metamorphism of rift basin-related clastic sedimentary and interbedded volcanic rocks. Individual deposits may contain more than 15,600 t Ag (500 Moz) at high grades. Ores are characterized by four well-defined metal associations, including Ag, Ag-Pb-Zn, Ag-Cu, and Ag-Co-Ni-U. Leaching, transport, and deposition of metals may occur both in specific sedimentary strata and other rock types adjacent to the rift. Multiple mineralizing events lasting 10 to 15 m.y., separated by as much as 1 b.y., may occur in a single basin

Metal endowment reflected in chemical composition of silicates and sulfides of mineralized porphyry copper systems, Urumieh-Dokhtar magmatic arc, Iran

NASA Astrophysics Data System (ADS)

Zarasvandi, Alireza; Rezaei, Mohsen; Raith, Johann G.; Pourkaseb, Houshang; Asadi, Sina; Saed, Madineh; Lentz, David R.

2018-02-01

The present work attempts to discriminate between the geochemical features of magmatic-hydrothermal systems involved in the early stages of mineralization in high grade versus low grade porphyry copper systems, using chemical compositions of silicate and sulfide minerals (i.e., plagioclase, biotite, pyrite and chalcopyrite). The data indicate that magmatic plagioclase in all of the porphyry copper systems studied here has high An% and Al content with a significant trend of evolution toward AlAl3SiO8 and □Si4O8 endmembers, providing insight into the high melt water contents of the parental magmas. Comparably, excess Al and An% in the high grade deposits appears to be higher than that of selected low grade deposits, representing a direct link between the amounts of exsolving hydrothermal fluids and the potential of metal endowment in porphyry copper deposits (PCDs). Also, higher Al contents accompanied by elevated An% are linked to the increasing intensity of disruptive alteration (phyllic) in feldspars from the high grade deposits. As calculated from biotite compositions, chloride contents are higher in the exsolving hydrothermal fluids that contributed to the early mineralization stages of highly mineralized porphyry systems. However, as evidenced by scattered and elevated log (fH2O)/(fHF) and log (fH2O)/(fHCl) values, chloride contents recorded in biotite could be influenced by post potassic fluids. Geothermometry of biotite associated with the onset of sulfide mineralization indicates that there is a trend of increasing temperature from high grade to low grade porphyry systems. Significantly, this is coupled with a sharp change in copper content of pyrite assemblages precipitated at the early stages of mineralization such that Cu decreased with increasing temperature. Based on EMPA and detailed WDS elemental mapping, trace elements do not exhibit complex compositional zoning or solid solution in the sulfide structure. Nevertheless, significant amounts of Cu and

Diagnosing Portuguese Students' Misconceptions about the Mineral Concept

NASA Astrophysics Data System (ADS)

Monteiro, António; Nóbrega, Clévio; Abrantes, Isabel; Gomes, Celeste

2012-11-01

Educational researchers and teachers are well aware that misconceptions-erroneous ideas that differ from the scientifically accepted ones-are very common amongst students. Daily experiences, creative and perceptive thinking and science textbooks give rise to students' misconceptions which lead them to draw erroneous conclusions that become strongly attached to their views and somehow affect subsequent learning. The main scope of this study was to understand what students consider a mineral to be and why. Therefore, the goals were (1) to identify eleventh-grade students' misconceptions about the mineral concept; (2) to understand which variables (gender, parents' education level and attitude towards science) influenced students' conceptions; and (3) to create teaching tools for the prevention of misconceptions. In order to achieve these goals, a diagnostic instrument (DI), constituted of a two-tier diagnostic test and a Science Attitude Questionnaire, was developed to be used with a sample of 89 twelfth-grade students from five schools located in central Portugal. As far as we know, this is the first DI developed for the analysis of misconceptions about the mineral concept. Data analysis allows us to conclude that students had serious difficulties in understanding the mineral concept, having easily formed misconceptions. The variables gender and parents' education level influence certain students' conceptions. This study provides a valuable basis for reflection on teaching and learning strategies, especially on this particular theme.

30 CFR 717.14 - Backfilling and grading of road cuts, mine entry area cuts, and other surface work areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Backfilling and grading of road cuts, mine entry area cuts, and other surface work areas. 717.14 Section 717.14 Mineral Resources OFFICE OF SURFACE... MINING GENERAL PERFORMANCE STANDARDS § 717.14 Backfilling and grading of road cuts, mine entry area cuts...

Mineralized aplite—pegmatite at Jabal Sa'id, Hijaz region, Kingdom of Saudi Arabia

NASA Astrophysics Data System (ADS)

Hackett, Damien

The Jabal Sa'id aplite—pegmatite, located at 23°49'03″N, 40°56'30″E, is part of the Jabal Hadb ash Sharar granite complex and resulted from emplacement of a residual volatile-rich fraction of alkali granite magma dominantly above a chilled carapace. Mineralization is layered, with four peak grades in layers 20-25 m wide, one of which may represent a mineral resource with greater potential than the aplite—pegmatite as a whole. The grades of all elements, except Zr, increase towards the upper part of the body. Chemical composition is extremely variable. Major-oxide data confirm previously determined geochemical characteristics and genetic relationships that suggested this body is an apogranite. However, the abundant new data also show that differences between the aplite—pegmatite and cognate alkali microgranite are not as great as previously reported, except for Na 2O which is extremely depleted in the apogranite. REE data support suggested genetic relationships and indicate that feldspar fractionation was important during crystallization. They also show that the content of HREE is comparatively constant throughout the aplite—pegmatite, and that variations in total REE content are caused by variations in the content of LREE. Bastnaesite and synchysite-(Y) are the principal rare-earth-element minerals, and are accompanied by monazite and synchesite; pyrochlore and thorite are also important ore minerals. Other elements concentrated in the aplite—pegmatite, such as Ta, Sn and U, occur only in solid solution in these minerals. The grain size of the ore minerals is commonly in the range 0.02-0.2 mm, and the grain size of gangue minerals, quartz, microcline and lesser amounts of aegirine and arfvedsonite, is typically in the range 1.0-4.0 mm. The ore minerals occur typically along gangue mineral boundaries. Zoning within the body permits calculation of high- and low-grade reserves which correspond to the upper and lower part of the apogranite.

Recovery of magnetite from low grade banded magnetite quartzite (BMQ) ore

NASA Astrophysics Data System (ADS)

Tripathy, Alok; Bagchi, Subhankar; Rao, Danda Srinivas; Nayak, Bijaya Ketana; Rout, Prashanta Kumar; Biswal, Surendra Kumar

2018-04-01

There has been a steady increase of iron ore demand in the last few decades. This growing demand could be countered by use of low grade iron ore after beneficiation. Banded iron formations (BIF) are one of the resources of such low grade iron ores. Banded magnetite quartzite (BMQ) is one such BIF and a source of iron phase mineral in the form of magnetite. In the present study a low grade BMQ ore containing around 25.47% Fe was beneficiated for recovery of magnetite. XRD study shows that quartz, magnetite, hematite, and goethite are the major minerals phases present in the low grade BMQ sample. Unit operations such as crushing, scrubbing, grinding, and magnetic separations were used for recovering magnetite. Based on the large scale beneficiation studies the process flowsheet has been developed for enrichment of magnetite. It was found that with the help of developed process flowsheet it is possible to enrich Fe value up to 65.14% in the concentrate with a yield of 24.59%.

Inclusion of human mineralized exometabolites and fish wastes as a source of higher plant mineral nutrition in BTLSS mass exchange

NASA Astrophysics Data System (ADS)

Tikhomirova, Natalia; Tikhomirov, Alexander A.; Ushakova, Sofya; Anischenko, Olesya; Trifonov, Sergey V.

Human exometabolites inclusion into an intrasystem mass exchange will allow increasing of a closure level of a biological-technical life support system (BTLSS). Previously at the IBP SB RAS it was shown that human mineralized exometabolites could be incorporated in the BTLSS mass exchange as a mineral nutrition source for higher plants. However, it is not known how that combined use of human mineralized exometabolites and fish wastes in the capacity of nutrient medium, being a part of the BTLSS consumer wastes, will affect the plant productivity. Several wheat vegetations were grown in an uneven-aged conveyor on a neutral substrate. A mixture of human mineralized exometabolites and fish wastes was used as a nutrient solution in the experiment treatment and human mineralized exometabolites were used in the control. Consequently, a high wheat yield in the experiment treatment practically equal to the control yield was obtained. Thus, mineralized fish wastes can be an additional source of macro-and micronutrients for plants, and use of such wastes for the plant mineral nutrition allows increasing of BTLSS closure level.

Mineral resource of the month: Chromium

USGS Publications Warehouse

Schulte, Ruth

2018-01-01

Although chromium is a metal, it does not occur naturally in metallic form. Chromium can be found in many minerals, but the only economically significant chromium-bearing mineral is chromite. Chromite has been mined from four different deposit types: stratiform chromite, podiform chromite, placer chromite, and laterite deposits. Most of the world's resources, however, are located in stratiform chromite deposits, such as the Bushveld Complex in South Africa. The economic potential of chromite resources depends on the thickness and continuity of the deposit and on the grade of the ore. Many of the major stratiform chromite deposits also contain economic levels of platinum, paladium, rhodium, osmium, iridium, and ruthenium.

Extraction of Copper from Malanjkhand Low-Grade Ore by Bacillus stearothermophilus.

PubMed

Singh, Sradhanjali; Sukla, Lala Behari; Mishra, Baroda Kanta

2011-10-01

Thermophilic bacteria are actively prevalent in hot water springs. Their potential to grow and sustain at higher temperatures makes them exceptional compare to other microorganism. The present study was initiated to isolate, identify and determine the feasibility of extraction of copper using thermophilic heterotrophic bacterial strain. Bacillus stearothermophilus is a thermophilic heterotrophic bacterium isolated from hot water spring, Atri, Orissa, India. This bacterium was adapted to low-grade chalcopyrite ore and its efficiency to solubilize copper from Malanjkhand low-grade ore was determined. The low-grade copper ore contains 0.27% Cu, in which the major copper-bearing mineral is chalcopyrite associated with other minerals present as minor phase. Variation in parameters such as pulp-density and temperatures were studied. After 30 days of incubation, it was found that Bacillus stearothermophilus solubilize copper up to 81.25% at pH 6.8 at 60°C.

Carbonatites of the World, Explored Deposits of Nb and REE - Database and Grade and Tonnage Models

USGS Publications Warehouse

Berger, Vladimir I.; Singer, Donald A.; Orris, Greta J.

2009-01-01

This report is based on published tonnage and grade data on 58 Nb- and rare-earth-element (REE)-bearing carbonatite deposits that are mostly well explored and are partially mined or contain resources of these elements. The deposits represent only a part of the known 527 carbonatites around the world, but they are characterized by reliable quantitative data on ore tonnages and grades of niobium and REE. Grade and tonnage models are an important component of mineral resource assessments. Carbonatites present one of the main natural sources of niobium and rare-earth elements, the economic importance of which grows consistently. A purpose of this report is to update earlier publications. New information about known deposits, as well as data on new deposits published during the last decade, are incorporated in the present paper. The compiled database (appendix 1; linked to right) contains 60 explored Nb- and REE-bearing carbonatite deposits - resources of 55 of these deposits are taken from publications. In the present updated grade-tonnage model we have added 24 deposits comparing with the previous model of Singer (1998). Resources of most deposits are residuum ores in the upper part of carbonatite bodies. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types are present in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment, and the grade and tonnage models allow economists to

Is there a metric for mineral deposit occurrence probabilities?

USGS Publications Warehouse

Drew, L.J.; Menzie, W.D.

1993-01-01

Traditionally, mineral resource assessments have been used to estimate the physical inventory of critical and strategic mineral commodities that occur in pieces of land and to assess the consequences of supply disruptions of these commodities. More recently, these assessments have been used to estimate the undiscovered mineral wealth in such pieces of land to assess the opportunity cost of using the land for purposes other than mineral production. The field of mineral resource assessment is an interdisciplinary field that draws elements from the disciplines of geology, economic geology (descriptive models), statistics and management science (grade and tonnage models), mineral economics, and operations research (computer simulation models). The purpose of this study is to assert that an occurrenceprobability metric exists that is useful in "filling out" an assessment both for areas in which only a trivial probability exists that a new mining district could be present and for areas where nontrivial probabilities exist for such districts. ?? 1993 Oxford University Press.

Short Course Introduction to Quantitative Mineral Resource Assessments

USGS Publications Warehouse

Singer, Donald A.

2007-01-01

This is an abbreviated text supplementing the content of three sets of slides used in a short course that has been presented by the author at several workshops. The slides should be viewed in the order of (1) Introduction and models, (2) Delineation and estimation, and (3) Combining estimates and summary. References cited in the slides are listed at the end of this text. The purpose of the three-part form of mineral resource assessments discussed in the accompanying slides is to make unbiased quantitative assessments in a format needed in decision-support systems so that consequences of alternative courses of action can be examined. The three-part form of mineral resource assessments was developed to assist policy makers evaluate the consequences of alternative courses of action with respect to land use and mineral-resource development. The audience for three-part assessments is a governmental or industrial policy maker, a manager of exploration, a planner of regional development, or similar decision-maker. Some of the tools and models presented here will be useful for selection of exploration sites, but that is a side benefit, not the goal. To provide unbiased information, we recommend the three-part form of mineral resource assessments where general locations of undiscovered deposits are delineated from a deposit type's geologic setting, frequency distributions of tonnages and grades of well-explored deposits serve as models of grades and tonnages of undiscovered deposits, and number of undiscovered deposits are estimated probabilistically by type. The internally consistent descriptive, grade and tonnage, deposit density, and economic models used in the design of the three-part form of assessments reduce the chances of biased estimates of the undiscovered resources. What and why quantitative resource assessments: The kind of assessment recommended here is founded in decision analysis in order to provide a framework for making decisions concerning mineral

Porphyry Copper Deposits of the World: Database and Grade and Tonnage Models, 2008

USGS Publications Warehouse

Singer, Donald A.; Berger, Vladimir I.; Moring, Barry C.

2008-01-01

This report is an update of earlier publications about porphyry copper deposits (Singer, Berger, and Moring, 2002; Singer, D.A., Berger, V.I., and Moring, B.C., 2005). The update was necessary because of new information about substantial increases in resources in some deposits and because we revised locations of some deposits so that they are consistent with images in GoogleEarth. In this report we have added new porphyry copper deposits and removed a few incorrectly classed deposits. In addition, some errors have been corrected and a number of deposits have had some information, such as grades, tonnages, locations, or ages revised. Colleagues have helped identify places where improvements were needed. Mineral deposit models are important in exploration planning and quantitative resource assessments for a number of reasons including: (1) grades and tonnages among deposit types are significantly different, and (2) many types occur in different geologic settings that can be identified from geologic maps. Mineral deposit models are the keystone in combining the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Too few thoroughly explored mineral deposits are available in most local areas for reliable identification of the important geoscience variables or for robust estimation of undiscovered deposits?thus we need mineral-deposit models. Globally based deposit models allow recognition of important features because the global models demonstrate how common different features are. Well-designed and -constructed deposit models allow geologists to know from observed geologic environments the possible mineral deposit types that might exist, and allow economists to determine the possible economic viability of these resources in the region. Thus, mineral deposit models play the central role in transforming geoscience information to a form useful to policy makers. The foundation of

An Examination of Test-Retest, Alternate Form Reliability, and Generalizability Theory Study of the easyCBM Word and Passage Reading Fluency Assessments: Grade 3. Technical Report #1218

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

This technical report is one in a series of five describing the reliability (test/retest and alternate form) and G-Theory/D-Study research on the easyCBM reading measures, grades 1-5. Data were gathered in the spring of 2011 from a convenience sample of students nested within classrooms at a medium-sized school district in the Pacific Northwest.…

Economic filters for evaluating porphyry copper deposit resource assessments using grade-tonnage deposit models, with examples from the U.S. Geological Survey global mineral resource assessment: Chapter H in Global mineral resource assessment

USGS Publications Warehouse

Robinson, Gilpin R.; Menzie, W. David

2012-01-01

One implication of the economic filter results for undiscovered copper resources is that global copper supply will continue to be dominated by production from a small number of giant deposits. This domination of resource supply by a small number of producers may increase in the future, because an increasing proportion of new deposit discoveries are likely to occur in remote areas and be concealed deep beneath covering rock and sediments. Extensive mineral exploration activity will be required to meet future resource demand, because these deposits will be harder to find and more costly to mine than near-surface deposits located in more accessible areas. Relatively few of the new deposit discoveries in these high-cost settings will have sufficient tonnage and grade characteristics to assure positive economic returns on development and exploration costs.

Optimization of Mineral Separator for Recovery of Total Heavy Minerals of Bay of Bengal using Central Composite Design

NASA Astrophysics Data System (ADS)

Routray, Sunita; Swain, Ranjita; Rao, Raghupatruni Bhima

2017-04-01

The present study is aimed at investigating the optimization of a mineral separator for processing of beach sand minerals of Bay of Bengal along Ganjam-Rushikulya coast. The central composite design matrix and response surface methodology were applied in designing the experiments to evaluate the interactive effects of the three most important operating variables, such as feed quantity, wash water rate and Shake amplitude of the deck. The predicted values were found to be in good agreement with the experimental values (R2 = 0.97 for grade and 0.98 for recovery). To understand the impact of each variable, three dimensional (3D) plots were also developed for the estimated responses.

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME II.

ERIC Educational Resources Information Center

AMATULLI, ANGELO; AND OTHERS

THE JOB CONTENT OF THE TECHNICAL OCCUPATIONS AND THE TECHNICAL SKILLS AND SUBJECT MATTER KNOWLEDGES REQUIRED ARE BASED PRIMARILY ON INFORMATION SUPPLIED BY EMPLOYERS FROM 17,414 ESTABLISHMENTS IN NEW YORK STATE. DATA ARE ALSO GIVEN ON GRADE STRUCTURE, EDUCATION AND EXPERIENCE REQUIREMENTS, TESTS AND LICENSES REQUIRED FOR THE JOB, SOURCES OF…

Zeolite-clay mineral zonation of volcaniclastic sediments within the McDermitt caldera complex of Nevada and Oregon

USGS Publications Warehouse

Glanzman, Richard K.; Rytuba, James J.

1979-01-01

Volcaniclastic sediments deposited in the moat of the collapsed McDermitt caldera complex have been altered chiefly to zeolites and potassium feldspar. The original rhyolitic and peralkaline ash-flow tuffs are included in conglomerates at the caldera rims and grade into a lacustrine series near the center of the collapse. The tuffs show a lateral zeolitic alteration from almost fresh glass to clinoptilolite, clinoptilolite-mordenite, and erionite; to analcime-potassium feldspar; and finally to potassium feldspar. Vertical zonation is in approximately the same order. Clay minerals in associated mudstones, on the other hand, show little lateral variation but a distinct vertical zonation, having a basal dioctahedral smectite, a medial trioctahedral smectite, and an upper dioctahedral smectite. The medial trioctahedral smectite is enriched in lithium (as much as 6,800 ppm Li). Hydrothermal alteration of the volcaniclastic sediments, forming both mercury and uranium deposits, caused a distinct zeolite and clay-mineral zonation within the general lateral zonation. The center of alteration is generally potassium feldspar, commonly associated with alunite. Potassium feldspar grades laterally and vertically to either clinoptilolite or clinoptilolite-mordenite, generally associated with gypsum. This zone then grades vertically and laterally into fresh glass. The clay minerals are a dioctahedral smectite, a mixed-layer clay mineral, and a 7-A clay mineral. The mixed-layer and 7-A clay minerals are associated with the potassium feldspar-alunite zone of alteration, and the dioctahedral smectite is associated with clinoptilolite. This mineralogical zonation may be an exploration guide for mercury and uranium mineralization in the caldera complex environment.

Mineral resource potential map of the Sugarloaf Roadless Area, San Bernardino County, California

USGS Publications Warehouse

Powell, Robert E.; Matti, Jonathan C.; Cox, Brett F.; Oliver, Howard W.; Wagini, Alexander; Campbell, Harry W.

1983-01-01

Geologic, geochemical, and geophysical investigations and a survey of mines and prospects indicate that the Sugaloaf Roadless Area contains subeconomic graphite and magnesian marble resources. Parts of the area have a low potential for the occurrence of additional low-grade graphite resources, but there is no potential for additional magnesian marble resources within the roadless area. Sand, gravel, and construction stone other than carbonate rocks are found in the roadless area, but similar or better quality materials are abundant and more accessible outside the area. The roadless area has no identified energy mineral resources, but parts of the area have a low to moderate potential for low-grade uranium resources. There are no identified metallic mineral resources within the area, and there is no evidence of a potential for the occurrence of such resources. No previously unknown mineral occurrence was located during this study.

Vocational-Technical Education: A Plan for Monroe County, Florida.

ERIC Educational Resources Information Center

Mills, Hugh L., Sr., Ed.; Pilcher, Palmer, C., Ed.

Suggested vocational-technical education programs for the Monroe County Florida school system are presented along with recommendations to implement the principle of coordinated career education in the public schools. Expansion of vocational-technical programs is emphasized to expose all students from kindergarten through Grade 12 to career…

Beneficiation and leaching study of a muti-Au carrier and low grade refractory gold ore

NASA Astrophysics Data System (ADS)

Li, W. J.; Song, Y. S.; Chen, Y.; Cai, L. L.; Zhou, G. Y.

2017-09-01

Detailed mineralogy and beneficiation and leaching study of a muti-Au carrier, low grade refractory gold ore from a beneficiation plant in Henan Province, China, was investigated. Mineral liberation analysis, scanning electron microscopy, element phase analysis and etc. by a mineral liberation analyser were used for mineralogical characterization study of this ore. The present work describes an experimental study on the effect of traditional parameters (such as grinding fineness and reagent regimes), middling processing method and flowsheet construction on the total recovery and the assay of the floatation concentrate. Two-step floatation and part of middling combined to the floatation tailing for gold leaching process resulted in high gold grade (g.t-1) and gold recovery (%) for this refractory gold ore. This process opens the possibilities of maximizing Au grade and recoveries in a muti-Au carrier and low grade refractory gold ore where low recoveries are common.

Biogenic and Synthetic Peptides with Oppositely Charged Amino Acids as Binding Sites for Mineralization.

PubMed

Lemloh, Marie-Louise; Altintoprak, Klara; Wege, Christina; Weiss, Ingrid M; Rothenstein, Dirk

2017-01-28

Proteins regulate diverse biological processes by the specific interaction with, e.g., nucleic acids, proteins and inorganic molecules. The generation of inorganic hybrid materials, such as shell formation in mollusks, is a protein-controlled mineralization process. Moreover, inorganic-binding peptides are attractive for the bioinspired mineralization of non-natural inorganic functional materials for technical applications. However, it is still challenging to identify mineral-binding peptide motifs from biological systems as well as for technical systems. Here, three complementary approaches were combined to analyze protein motifs consisting of alternating positively and negatively charged amino acids: (i) the screening of natural biomineralization proteins; (ii) the selection of inorganic-binding peptides derived from phage display; and (iii) the mineralization of tobacco mosaic virus (TMV)-based templates. A respective peptide motif displayed on the TMV surface had a major impact on the SiO₂ mineralization. In addition, similar motifs were found in zinc oxide- and zirconia-binding peptides indicating a general binding feature. The comparative analysis presented here raises new questions regarding whether or not there is a common design principle based on acidic and basic amino acids for peptides interacting with minerals.

Nutritional and functional characteristics of seven grades of black tea produced in Turkey.

PubMed

Serpen, Arda; Pelvan, Ebru; Alasalvar, Cesarettin; Mogol, Burçe Ataç; Yavuz, Havvana Tuba; Gökmen, Vural; Özcan, Nihat; Özçelik, Beraat

2012-08-08

Seven grades of black tea [high-quality black tea (grades 1-3) and low-quality black tea (grades 4-7)], processed by ÇAYKUR Tea Processing Plant (Rize, Turkey), were examined for their proximate composition, dietary fiber, minerals, and water-soluble vitamins as well as total phenolic content, various antioxidant assays, phenolics (flavanols, alkoloids, condensed phenolics, and phenolic acids), chlorophylls, and carotenoids. Some variations, albeit to different extents, were observed (p < 0.05) among these parameters in seven grades of black tea. With respect to proximate composition, dietary fiber was the predominant compound (ranging from 49.68 to 54.31 g/100 g), followed by protein, carbohydrate, and, to a lesser extent, ash, moisture, and fat. Thirteen minerals, four water-soluble vitamins, six flavanols, two alkoloids, three condensed phenolics, one phenolic acid, two chlorophylls, and two carotenoids were identified in the seven grades of black tea. Total phenol content ranged from 7.52 to 8.29 g of gallic acid equivalents (GAE)/100 g, being lowest in grade 6 and highest in grade 1. With regard to antioxidant activities, a large variation in oxygen radical absorbance capacity (ORAC) values was observed among all grades of black tea (ranging from 777 μmol of trolox equivalents (TE)/g in grade 7 to 1210 μmol of TE/g in grade 3). The present work suggests that high- and low-quality black teas should not be distinguished on the basis of their nutritional and functional characteristics. The combination of nutritional compounds together with functional characteristics renders combination effects that provide the characteristic quality of each grade of black tea.

Sediment-Hosted Zinc-Lead Deposits of the World - Database and Grade and Tonnage Models

USGS Publications Warehouse

Singer, Donald A.; Berger, Vladimir I.; Moring, Barry C.

2009-01-01

This report provides information on sediment-hosted zinc-lead mineral deposits based on the geologic settings that are observed on regional geologic maps. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to make this kind of information available in digital form for sediment-hosted zinc-lead deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments: Grades and tonnages among deposit types are significantly different, and many types occur in different geologic settings that can be identified from geologic maps. Mineral-deposit models are the keystone in combining the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Too few thoroughly explored mineral deposits are available in most local areas for reliable identification of the important geoscience variables, or for robust estimation of undiscovered deposits - thus, we need mineral-deposit models. Globally based deposit models allow recognition of important features because the global models demonstrate how common different features are. Well-designed and -constructed deposit models allow geologists to know from observed geologic environments the possible mineral-deposit types that might exist, and allow economists to determine the possible economic viability of these resources in the region. Thus, mineral-deposit models play the central role in transforming geoscience information to a form useful to policy makers. This publication contains a computer file of information on sediment-hosted zinc-lead deposits from around the world. It also presents new grade and tonnage models for nine types of these deposits and a file allowing locations of all deposits to be plotted in Google Earth. The data are presented in FileMaker Pro, Excel and text files to make the information available to as many as possible. The

Reconstructing the evolution of first-row transition metal minerals by GeoDeepDive

NASA Astrophysics Data System (ADS)

Liu, C.; Peters, S. E.; Ross, I.; Golden, J. J.; Downs, R. T.; Hazen, R. M.

2016-12-01

Terrestrial mineralogy evolves as a consequence of a range of physical, chemical, and biological processes [1]. Evolution of the first-row transition metal minerals could mirror the evolution of Earth's oxidation state and life, since these elements mostly are redox-sensitive and/or play critical roles in biology. The fundamental building blocks to reconstruct mineral evolution are the mineral species, locality, and age data, which are typically dispersed in sentences in scientific and technical publications. These data can be tracked down in a brute-force way, i.e., human retrieval, reading, and recording all relevant literature. Alternatively, they can be extracted automatically by GeoDeepDive. In GeoDeepDive, scientific and technical articles from publishers, including Elsevier, Wiley, USGS, SEPM, GSA and Canada Science Publishing, have been parsed into a Javascript database with NLP tags. Sentences containing data of mineral names, locations, and ages can be recognized and extracted by user-developed applications. In a preliminary search for cobalt mineral ages, we successfully extracted 678 citations with >1000 mentions of cobalt minerals, their locations, and ages. The extracted results are in agreement with brute-force search results. What is more, GeoDeepDive provides 40 additional data points that were not recovered by the brute-force approach. The extracted mineral locality-age data suggest that the evolution of Co minerals is controlled by global supercontinent cycles, i.e., more Co minerals form during episodes of supercontinent assembly. Mineral evolution of other first-row transition elements is being investigated through GeoDeepDive. References: [1] Hazen et al. (2008) Mineral evolution. American Mineralogist, 93, 1693-1720

Technical Report: Unmanned Helicopter Solution for Survey-Grade Lidar and Hyperspectral Mapping

NASA Astrophysics Data System (ADS)

Kaňuk, Ján; Gallay, Michal; Eck, Christoph; Zgraggen, Carlo; Dvorný, Eduard

2018-05-01

Recent development of light-weight unmanned airborne vehicles (UAV) and miniaturization of sensors provide new possibilities for remote sensing and high-resolution mapping. Mini-UAV platforms are emerging, but powerful UAV platforms of higher payload capacity are required to carry the sensors for survey-grade mapping. In this paper, we demonstrate a technological solution and application of two different payloads for highly accurate and detailed mapping. The unmanned airborne system (UAS) comprises a Scout B1-100 autonomously operating UAV helicopter powered by a gasoline two-stroke engine with maximum take-off weight of 75 kg. The UAV allows for integrating of up to 18 kg of a customized payload. Our technological solution comprises two types of payload completely independent of the platform. The first payload contains a VUX-1 laser scanner (Riegl, Austria) and a Sony A6000 E-Mount photo camera. The second payload integrates a hyperspectral push-broom scanner AISA Kestrel 10 (Specim, Finland). The two payloads need to be alternated if mapping with both is required. Both payloads include an inertial navigation system xNAV550 (Oxford Technical Solutions Ltd., United Kingdom), a separate data link, and a power supply unit. Such a constellation allowed for achieving high accuracy of the flight line post-processing in two test missions. The standard deviation was 0.02 m (XY) and 0.025 m (Z), respectively. The intended application of the UAS was for high-resolution mapping and monitoring of landscape dynamics (landslides, erosion, flooding, or crops growth). The legal regulations for such UAV applications in Switzerland and Slovakia are also discussed.

Anatomic severity grading score predicts technical difficulty, early outcomes, and hospital resource utilization of endovascular aortic aneurysm repair.

PubMed

Ahanchi, Sadaf S; Carroll, Megan; Almaroof, Babatunde; Panneton, Jean M

2011-11-01

-rendering software. The anatomic severity grading score correlates with the technical difficulty of EVAR and the extent of hospital resource utilization. Copyright © 2011 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

Determination of a Definition of Solar Grade Silicon

NASA Technical Reports Server (NTRS)

Hill, D. E.; Gutsche, H. W.

1975-01-01

A definition of solar grade silicon was determined by investigating the singular and the combined effect of the impurities usually found in metallurgical grade silicon on solar cell device performance. The impurity matrix was defined by Jet Propulsion Laboratory Technical Direction Memorandum. The initial work was focussed on standardizing the solar cell process and test procedure, growing baseline crystals, growing crystals contaminated with carbon, iron, nickel, zirconium, aluminum and vanadium, solar blank preparation, and material characterization.

Power-grade butanol recovery and utilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noon, R.

1982-02-12

As an alternative to the traditional recovery systems, it was proposed in a previous publication that the n-butanol/acetone/ethanol fermentation products could be recovered as a power grade fuel blend and used directly as a fuel. This would affect a savings in process energy requirements because each chemical component would not have to be processed individually to technical grade purity. Further, some residual water could be tolerated in the fuel blend. To develop such a power grade fuel recovery scheme beyond the conceptual stage, the Energy Research and Resource Division of the Kansas Energy Office undertook a two-fold program to demonstratemore » and test a power grade butanol/acetone/ethanol fuel recovery system, and further to demonstrate the feasibility of using the fuel blend in a standard type engine. A development program was initiated to accomplish the following objectives: design and test an operational power grade butanol recovery plant that would operate at one liter per hour output; and test and assess the performance of power grade butanol in a spark ignition automotive engine. This project has demonstrated that recovery of a power grade butanol fuel blend is simple and can be accomplished at a considered energy advantage over ethanol. It was further demonstrated that such a power grade blend works well in a typical spark ignition engine.« less

Value of Job Experience to Teaching Effectiveness of Technical Training Instructors.

ERIC Educational Resources Information Center

Askren, William B.; Valentine, Robert I.

Air Force technical training instructors with and without field job experience were compared regarding teaching effectiveness. Student grades, written critiques, and supervisor ratings were used to measure effectiveness. Results indicated significant differences between instructors on student overall course grades and critiques. However, an…

The Virtual Museum of Minerals and Molecules: Molecular Visualization in a Virtual Hands-On Museum

ERIC Educational Resources Information Center

Barak, Phillip; Nater, Edward A.

2005-01-01

The Virtual Museum of Minerals and Molecules (VMMM) is a web-based resource presenting interactive, 3-D, research-grade molecular models of more than 150 minerals and molecules of interest to chemical, earth, plant, and environmental sciences. User interactivity with the 3-D display allows models to be rotated, zoomed, and specific regions of…

Calcium phosphate mineralization is widely applied in crustacean mandibles.

PubMed

Bentov, Shmuel; Aflalo, Eliahu D; Tynyakov, Jenny; Glazer, Lilah; Sagi, Amir

2016-02-24

Crustaceans, like most mineralized invertebrates, adopted calcium carbonate mineralization for bulk skeleton reinforcement. Here, we show that a major part of the crustacean class Malacostraca (which includes lobsters, crayfishes, prawns and shrimps) shifted toward the formation of calcium phosphate as the main mineral at specified locations of the mandibular teeth. In these structures, calcium phosphate is not merely co-precipitated with the bulk calcium carbonate but rather creates specialized structures in which a layer of calcium phosphate, frequently in the form of crystalline fluorapatite, is mounted over a calcareous "jaw". From a functional perspective, the co-existence of carbonate and phosphate mineralization demonstrates a biomineralization system that provides a versatile route to control the physico-chemical properties of skeletal elements. This system enables the deposition of amorphous calcium carbonate, amorphous calcium phosphate, calcite and apatite at various skeletal locations, as well as combinations of these minerals, to form graded composites materials. This study demonstrates the widespread occurrence of the dual mineralization strategy in the Malacostraca, suggesting that in terms of evolution, this feature of phosphatic teeth did not evolve independently in the different groups but rather represents an early common trait.

Calcium phosphate mineralization is widely applied in crustacean mandibles

PubMed Central

Bentov, Shmuel; Aflalo, Eliahu D.; Tynyakov, Jenny; Glazer, Lilah; Sagi, Amir

2016-01-01

Crustaceans, like most mineralized invertebrates, adopted calcium carbonate mineralization for bulk skeleton reinforcement. Here, we show that a major part of the crustacean class Malacostraca (which includes lobsters, crayfishes, prawns and shrimps) shifted toward the formation of calcium phosphate as the main mineral at specified locations of the mandibular teeth. In these structures, calcium phosphate is not merely co-precipitated with the bulk calcium carbonate but rather creates specialized structures in which a layer of calcium phosphate, frequently in the form of crystalline fluorapatite, is mounted over a calcareous “jaw”. From a functional perspective, the co-existence of carbonate and phosphate mineralization demonstrates a biomineralization system that provides a versatile route to control the physico-chemical properties of skeletal elements. This system enables the deposition of amorphous calcium carbonate, amorphous calcium phosphate, calcite and apatite at various skeletal locations, as well as combinations of these minerals, to form graded composites materials. This study demonstrates the widespread occurrence of the dual mineralization strategy in the Malacostraca, suggesting that in terms of evolution, this feature of phosphatic teeth did not evolve independently in the different groups but rather represents an early common trait. PMID:26906263

Binding of environmental carcinogens to asbestos and mineral fibres.

PubMed Central

Harvey, G; Pagé, M; Dumas, L

1984-01-01

A rapid method has been developed for measuring the binding capacity of asbestos and other mineral fibres for environmental carcinogens. Benzo(alpha)pyrene (B(alpha)P), nitrosonornicotine (NNN), and N-acetyl-2-aminofluorene (NAAF) were assayed in the presence of Canadian grade 4T30 chrysotile, chrysotile A, amosite, crocidolite, glass microfibres, glasswool, attapulgite, and titanium dioxide. Chrysotile binds significantly more carcinogens than the other mineral fibres. This binding assay is reproducible with coefficients of variation of less than 8% and 6% respectively for inter and intra assay. The influence of pH was also studied, and there is good correlation between the carcinogen binding and the charge of the tested mineral fibres. The in vitro cytotoxicity on macrophage like cell line P388D1 and the haemolytic activity of various mineral fibres were also measured; a good correlation was found between the binding capacity and the cytotoxicity of tested mineral fibres on P388D1 cells. These results give some explanations for the reported synergism between exposure to asbestos and the smoking habits of workers. PMID:6331497

A Dictionary of Mining, Mineral and Related Terms.

ERIC Educational Resources Information Center

Thrush, Paul W., Comp.

This dictionary contains about 55,000 terms with approximately 150,000 definitions. These terms are of both a technical and local nature and apply to metal mining, coal mining, quarrying, geology, metallurgy, ceramics and clays, glassmaking, minerals and mineralogy, and general terminology. Petroleum, natural gas, and legal mining terminology,…

Effects of intrusions on grades and contents of gold and other metals in volcanogenic massive sulfide deposits

USGS Publications Warehouse

Singer, Donald A.; Berger, Vladimir; Mosier, Dan L.

2011-01-01

The reason some VMS deposits contain more gold or other metals than others might be due to the influence of intrusions. A new approach examining this possibility is based on examining the information about many VMS deposits to test statistically if those with associated intrusions have significantly different grades or amounts of metals. A set of 632 VMS deposits with reported grades, tonnages, and information about the observed presence or absence of subvolcanic or plutonic intrusive bodies emplaced at or after VMS mineralization is statistically analyzed.Deposits with syn-mineralization or post-mineralization intrusions nearby have higher tonnages than deposits without reported intrusions, but the differences are not statistically significant. When both kinds of intrusions are reported, VMS deposit sizes are significantly higher than in the deposits without any intrusions. Gold, silver, zinc, lead, and copper average grades are not significantly different in the VMS deposits with nearby intrusions compared to deposits without regardless of relative age of intrusive. Only zinc and copper contents are significantly higher in VMS deposits with both kinds of intrusive reported. These differences in overall metal content are due to significantly larger deposit sizes of VMS deposits where both intrusive kinds are observed and reported, rather than any difference in metal grades.

Technical Adequacy of the easyCBM Primary-Level Reading Measures (Grades K-1), 2009-2010 Version. Technical Report #1003

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Nese, Joseph F. T.; Jamgochian, Elisa M.; Alonzo, Julie; Tindal, Gerald

2010-01-01

In this technical report, we provide the results of a series of studies on the technical adequacy of the early reading measures available on the easyCBM[R] assessment system. The results from the two-level hierarchical linear growth model analyses suggest that the reliability of the slope estimates for the easyCBM[R] reading measures are strong,…

Taxation of unmined minerals; Current developments in the Commonwealth of Kentucky

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bremberg, B.P.

1989-01-01

This paper reports on the Kentucky Revenue Cabinet which began implementing its controversial unmined minerals tax program. The Revenue Cabinet should complete its first annual assessment under this program in December, 1989. The Revenue Cabinet's initial efforts to collect basic data concerning the Commonwealth's coal bearing lands has yielded data coverage for 5 million of Kentucky's 10 million acres of coal lands. Approximately 1000 detailed information returns have been filed. The returns will be used to help create an undeveloped mineral reserves inventory, determine mineral ownership, and value mineral reserves. This new program is run by the Revenue Cabinet's Mineralmore » Valuation Section, under the Division of Technical Support, Department of Property Taxation. It has been in business since September of 1988.« less

Support Materials for the Software Technical Review Process

DTIC Science & Technology

1988-04-01

the Software Technical Review Process Softwar-e reviewing is a general term applied to techniques for the use of human hitellectual power to detect...more systematic than random. It utilizes data supplied by students, rather than relying solely on the subjective opinions of the instructor. The...The experience of other users is now essential.) "• Are the resulting grades accurate? (Thus far, they appear to correlate with student grades on

The Role of Halogens in High-Grade Metamorphism and Anatexis

NASA Astrophysics Data System (ADS)

Aranovich, L.; Safonov, O.

2016-12-01

We review factors controlling the distribution of the two major halogens, F and Cl, in high-grade metamorphic rocks; their compositional correlations and partitioning between minerals; experimental data on stability and phase equilibria of the halogen-bearing minerals; the influence of halogens on Fe-Mg exchange reactions; and the means of estimating concentrations/activity of halogen species concentration/ activity in the fluid phase ("chlorimetry and fluorimetry") via calculation of equilibrium conditions for mineral assemblages containing halogen-bearing phases. Clear negative correlation between the F content and XFe=Fe/(Fe+Mg) suggests that natural biotite and amphibole obey the Fe-F avoidance rule. A strong positive correlation exists between K and Cl in amphibole. A scattering of points on the XFe -Cl and TiO2- Cl diagrams indicate the possible involvement of an exotic Cl-rich phase (fluid or melt) during the formation of Cl-bearing biotite and amphibole. Fluorine and Cl substituting for OH-groups substantially stabilize minerals relative to dehydration and melting. They should also strongly affect partitioning of Fe and Mg between biotite, amphibole and anhydrous minerals. This effect is quantified for Fe-Mg exchange reactions involving biotite (Zhu and Sverjensky, 1992), but remains to be evaluated for amphibole. Calculations based on recent thermodynamic systematics show that the relatively Mg-rich, Cl-poor biotite (for example, XFe = 0.4 and about 0.2 wt.% Cl) may coexist with a fairly Cl-rich fluid, i.e. total Cl/(Cl+H2O) from 0.1-0.3, depending on the assemblage, under granulite facies P-T conditions. Alkali (and Ca) metasomatism caused by interaction of high grade rocks with halogen-bearing fluids has major impact on the subsolidus phase transformations and melting processes during high-grade metamorphism and anatexis. For example, an increase in sodium content in plagioclase (Pl) by 20 mol% due to infiltration of Na- fluid into the quartz (Qtz

Gold grade of epithermal gold ore at Lamuntet, Brang Rea, West Sumbawa District, West Nusa Tenggara Province, Indonesia

NASA Astrophysics Data System (ADS)

Ernawati, Rika; Idrus, Arifudin; TBMP, Himawan

2017-06-01

Lamuntet is one of gold ore mining area carried out by the Artisanal Small scale Gold Mining (ASGM) located in West Sumbawa, Indonesia. Most of the miners at this area are not the local miners but also those from other regions. Mineralization of this area is strong identified as low sulfidation epithermal system. There are two blocks of this mining location, namely, Ngelampar block with an area of 0.164 km2 and Song block with an area of 0.067 km2. This study was focused on Ngelampar block. The characteristic of epithermal system is the existence of quartz vein with comb, vuggy, and sugary texture. The aim of this research was to analyze the gold grade and other metals, such as Cu, Ag, Pb, As, Zn, and Hg. The research methods included literature study from previous researches, field work, laboratory work, and interpretation. The literature study was performed on previous researches with similar study area. The field work comprised of direct observation and sampling. Fieldwork was done for a week to obtain gold ore/vein. Sixteen samples were analyzed to obtain the grade of ore/metal. The Hg laboratory analysis was then performed on the six samples with the highest gold grade. Laboratory works were conducted at Intertek Jakarta by using Fire Assay (FA) for gold grade and Atomic Absorption Spectrophotometry (AAS) for Cu, Ag, Pb, As, Zn, and Hg. Results of the analysis showed the range of Au was grade (0.1 ppm - 27.8 ppm), Cu was 26 ppm -1740 ppm, Pb was 101 ppm- >4000 ppm, Zn of 73 ppm- >10,000 ppm, Ag of 3 ppm -185 ppm, As was 150 ppm-6530 ppm, and Hg of 0.08 ppm - 1.89 ppm. L1 and L15 had high grade for all values (Au, Ag, Zn, Cu, As, and Hg). Gold mineralization was formed as electrum because of Ag content is higher than 20%. Associated minerals of the samples in the study area were galena, sphalerite, arsenopyrite, and chalcopyrite which showed the characteristic of rich base metal of Pb, Zn, and Cu at LS epithermal.

A geochemical evaluation of the Ash Sha'ib mineral prospect, Asir quadrangle, Kingdom of Saudi Arabia

USGS Publications Warehouse

Allcott, Glenn H.

1970-01-01

The mineralized zone at the remotely located Ash Sha'ib ancient mine contains only a small tonnage of moderately low grade sulfide- bearing rock. Based on present data the gross value of the deposit, with a value of $25.00 or more per ton, is $20,000,000. A belt of metasedimentary rocks, intruded by gabbro to the south and granite to the north, was the host for fissure vein-replacement type mineralization. Most of the mineralization is in a siliceous dolomite transected by fissures. The main sulfide mineral is sphalerite, but minor amounts of chalcopyrlte and argentlferous galena contribute to the value of the mineralized sections.

Weathering Grade Classification of Granite Stone Monument Using Reflectance Spectroscopy

NASA Astrophysics Data System (ADS)

Hyun, C.; Roh, T.; Choi, M.; Park, H.

2009-05-01

Stone monument has been placed in field and exposed to rain and wind. This outdoor environment and air pollution induced weathering of stone monument. Weathering grade classification is necessary to manage and conserve stone monuments. Visual interpretation by geologist and laboratory experiments using specimens fallen off from the monument to avoid damage on the monument have been applied to classify weathering grade conventionally. Rocks and minerals absorb some particular wavelength ranges of electromagnetic energy by electronic process and vibrational process of composing elements and these phenomena produce intrinsic diagnostic spectral reflectance curve. Non-destructive technique for weathering degree assessment measures those diagnostic absorption features of weathering products and converts the depths of features related to abundance of the materials to relative weathering degree. We selected granite outcrop to apply conventional six folded weathering grade classification method using Schmidt hammer rebound teste. The correlations between Schmidt hammer rebound values and absorption depths of iron oxides such as ferric oxide in the vicinity of 0.9 micrometer wavelength and clay minerals such as illite and kaolinite in the vicinity of 2.2 micrometer wavelength, representative weathering products of granite, were analyzed. The Schmidt hammer rebound value decreased according to increase of absorption depths induced from those weathering products. Weathering grade classification on the granite stone monument was conducted by using absorption depths of weathering products This research is supported from National Research Institute of Cultural Heritage and we appreciate for this.

Characterization and Beneficiation Studies of a Low Grade Bauxite Ore

NASA Astrophysics Data System (ADS)

Rao, D. S.; Das, B.

2014-10-01

A low grade bauxite sample of central India was thoroughly characterized with the help of stereomicroscope, reflected light microscope and electron microscope using QEMSCAN. A few hand picked samples were collected from different places of the mine and were subjected to geochemical characterization studies. The geochemical studies indicated that most of the samples contain high silica and low alumina, except a few which are high grade. Mineralogically the samples consist of bauxite (gibbsite and boehmite), ferruginous mineral phases (goethite and hematite), clay and silicate (quartz), and titanium bearing minerals like rutile and ilmenite. Majority of the gibbsite, boehmite and gibbsitic oolites contain clay, quartz and iron and titanium mineral phases within the sample as inclusions. The sample on an average contains 39.1 % Al2O3 and 12.3 % SiO2, and 20.08 % of Fe2O3. Beneficiation techniques like size classification, sorting, scrubbing, hydrocyclone and magnetic separation were employed to reduce the silica content suitable for Bayer process. The studies indicated that, 50 % by weight with 41 % Al2O3 containing less than 5 % SiO2 could be achieved. The finer sized sample after physical beneficiation still contains high silica due to complex mineralogical associations.

Application of Research on the Metallogenic Background in the Assessment of Mineral Resources Potentiality

NASA Astrophysics Data System (ADS)

Jia, D.; Feng, Y.; Liu, J.; Yao, X.; Zhang, Z.; Ye, T.

2017-12-01

1. Working BackgroundCurrent Status of Geological Prospecting: Detecting boundaries and bottoms, making ore search nearby; Seeing the stars, not seeing the Moon; Deep prospecting, undesirable results. The reasons of these problems are the regional metallogenic backgroud unclear and the metallogenic backgroud of the exploration regions unknown. Accordingly, Development and Research Center, CGS organized a geological setting research, in detail investigate metallogenic geological features and acquire mineralization information. 2. Technical SchemeCore research content is prediction elements of Metallogenic Structure. Adopt unified technical requirements from top to bottom, and technical route from bottom to top; Divide elements of mineral forecast and characteristics of geological structure into five elements for research and expression; Make full use of geophysical, geochemical and remote sensing inferences for the interpretation of macro information. After eight years the great project was completed. 3. Main AchievementsInnovation of basic maps compilation content of geological background, reinforce of geological structure data base of potentiality valuation. Preparation of geotectonic facies maps in different scales and professions, providing brand-new geologic background for potentiality assessment, promoting Chinese geotectonic research to the new height. Preparation of 3,375 geological structure thematic base maps of detecting working area in 6 kinds of prediction methods, providing base working maps, rock assemblage, structure of the protolith of geologic body / mineralization / ore controlling for mineral prediction of 25 ores. Enrichment and development of geotectonic facies analysis method, establishment of metallogenic background research thoughts and approach system for assessment of national mineral resources potentiality for the first time. 4. Application EffectOrientation——More and better results with less effort. Positioning——Have a definite

Three archives of the U. S. Geological Survey's Western Mineral Resources Team

USGS Publications Warehouse

Bolm, Karen Sue; Frank, David G.; Schneider, Jill L.

2000-01-01

The Western Mineral Resources Team of the U.S. Geological Survey (USGS) has three archives, which hold unpublished or difficult-to-obtain records and literature. The Technical Data Unit in Anchorage, Alaska, holds maps, field notes, and other records of the USGS work in Alaska. The USGS Field Office in Spokane, Washington, houses the more than 5,000 files from Federal government exploration programs that contracted to fund exploration for some commodities from 1950 until 1974. The Latin American Archive in Tucson, Arizona, holds material on Latin American mineral resources collected by the Center for Inter-American MineralResources Investigations.

Hypomagnesemia and its relation with chronic low-grade inflammation in obesity.

PubMed

Oliveira, Ana Raquel Soares de; Cruz, Kyria Jayanne Clímaco; Severo, Juliana Soares; Morais, Jennifer Beatriz Silva; Freitas, Taynáh Emannuelle Coelho de; Araújo, Rogério Santiago; Marreiro, Dilina do Nascimento

2017-02-01

The accumulation of visceral fat in obesity is associated with excessive production of proinflammatory adipokines, which contributes to low-grade chronic inflammation state. Moreover, the literature has shown that mineral deficiency, in particular of magnesium, has important role in the pathogenesis of this metabolic disorder with relevant clinical repercussions. To bring updated information about the participation of hypomagnesemia in the manifestation of low-grade chronic inflammation in obese individuals. Articles published in PubMed, SciELO, LILACS and ScienceDirect, using the following keywords: "obesity," "magnesium" and "low grade inflammation." Scientific evidence suggests that magnesium deficiency favors the manifestation of low-grade chronic inflammation in obese subjects. From literature data, it is evident the participation of magnesium through biochemical and metabolic reactions in protecting against this metabolic disorder present in obesity.

Recent Developments in Multivitamin/Mineral Research12

PubMed Central

Comerford, Kevin B.

2013-01-01

The 2010 Dietary Guidelines Advisory Committee was charged with the task of investigating the effects of multivitamin/mineral supplements on healthy populations and also on those with chronic disease. The evidence from which the committee prepared its conclusions was graded on 5 fundamental criteria: quality, consistency, quantity, clinical impact, and generalizability. The committee concluded that for the general healthy population, evidence was insufficient to make a multivitamin/mineral recommendation. On the other hand, the committee noted the value of some supplemental nutrients for at-risk populations such as iron, folic acid, and vitamin B-12. However, most of the studies referenced for the research used the conventional, all-encompassing, and oversimplified definition of a multivitamin/mineral as being a supplement containing 3 or more vitamins with or without minerals. In the few years since the committee released its 2010 report, several randomized clinical trials showing the benefits of daily multivitamin/mineral supplementation have been completed using supplements containing at least 10 or more vitamins and/or minerals, but there also continues to be some reports that do not find benefit from such supplements. Furthermore, several steps have been taken to advance the science behind these supplements so that consumers, physicians, and government agencies can all have more confidence in understanding the role of supplemental nutrition in the American diet. This review provides new evidence from 2010 onward addressing the committee’s primary concerns about multivitamin/mineral research in regard to improving public health. It also includes several recent studies that may be of interest to future committees indicating the potential benefits of these supplements on improving the cognitive performance and mental well-being of healthy populations. PMID:24228193

The Development of Reading Ability in First and Second Grade. Technical Report No. 516.

ERIC Educational Resources Information Center

Meyer, Linda A.; And Others

This study determined how children develop reading ability in first and second grade. Subjects, approximately 315 children from 3 school districts in the midwest, were given a series of standardized and customized measures of reading comprehension. Linear structural models were developed at both grade levels using LISREL to explain variance in…

In-place oil shale resources in the saline-mineral and saline-leached intervals, Parachute Creek Member of the Green River Formation, Piceance Basin, Colorado

USGS Publications Warehouse

Birdwell, Justin E.; Mercier, Tracey J.; Johnson, Ronald C.; Brownfield, Michael E.; Dietrich, John D.

2014-01-01

A recent U.S. Geological Survey analysis of the Green River Formation of the Piceance Basin in western Colorado shows that about 920 and 352 billion barrels of oil are potentially recoverable from oil shale resources using oil-yield cutoffs of 15 and 25 gallons per ton (GPT), respectively. This represents most of the high-grade oil shale in the United States. Much of this rich oil shale is found in the dolomitic Parachute Creek Member of the Green River Formation and is associated with the saline minerals nahcolite and halite, or in the interval where these minerals have been leached by groundwater. The remaining high-grade resource is located primarily in the underlying illitic Garden Gulch Member of the Green River Formation. Of the 352 billion barrels of potentially recoverable oil resources in high-grade (≥25 GPT) oil shale, the relative proportions present in the illitic interval, non-saline R-2 zone, saline-mineral interval, leached interval (excluding leached Mahogany zone), and Mahogany zone were 3.1, 4.5, 36.6, 23.9, and 29.9 percent of the total, respectively. Only 2 percent of high-grade oil shale is present in marginal areas where saline minerals were never deposited.

Sediment-hosted gold deposits of the world: database and grade and tonnage models

USGS Publications Warehouse

Berger, Vladimir I.; Mosier, Dan L.; Bliss, James D.; Moring, Barry C.

2014-01-01

All sediment-hosted gold deposits (as a single population) share one characteristic—they all have disseminated micron-sized invisible gold in sedimentary rocks. Sediment-hosted gold deposits are recognized in the Great Basin province of the western United States and in China along with a few recognized deposits in Indonesia, Iran, and Malaysia. Three new grade and tonnage models for sediment-hosted gold deposits are presented in this paper: (1) a general sediment-hosted gold type model, (2) a Carlin subtype model, and (3) a Chinese subtype model. These models are based on grade and tonnage data from a database compilation of 118 sediment-hosted gold deposits including a total of 123 global deposits. The new general grade and tonnage model for sediment-hosted gold deposits (n=118) has a median tonnage of 5.7 million metric tonnes (Mt) and a gold grade of 2.9 grams per tonne (g/t). This new grade and tonnage model is remarkable in that the estimated parameters of the resulting grade and tonnage distributions are comparable to the previous model of Mosier and others (1992). A notable change is in the reporting of silver in more than 10 percent of deposits; moreover, the previous model had not considered deposits in China. From this general grade and tonnage model, two significantly different subtypes of sediment-hosted gold deposits are differentiated: Carlin and Chinese. The Carlin subtype includes 88 deposits in the western United States, Indonesia, Iran, and Malaysia, with median tonnage and grade of 7.1 Mt and 2.0 g/t Au, respectively. The silver grade is 0.78 g/t Ag for the 10th percentile of deposits. The Chinese subtype represents 30 deposits in China, with a median tonnage of 3.9 Mt and medium grade of 4.6 g/t Au. Important differences are recognized in the mineralogy and alteration of the two sediment-hosted gold subtypes such as: increased sulfide minerals in the Chinese subtype and decalcification alteration dominant in the Carlin type. We therefore

Agricultural In-Service Needs of Introductory Level Career and Technical Education Teachers

ERIC Educational Resources Information Center

Christensen, Jolene; Warnick, Brian K.; Spielmaker, Debra; Tarpley, Rudy S.; Straquadine, Gary S.

2009-01-01

This study identified and prioritized the agricultural in-service needs of introductory level career and technical education teachers in Utah. The Utah State Board of Education requires that all seventh grade students complete an introductory career and technical education course as their first formal career exploration experience. One component…

Platinum mineralization in the Kapalagulu Intrusion, western Tanzania

NASA Astrophysics Data System (ADS)

Wilhelmij, Harry R.; Cabri, Louis J.

2016-03-01

Low-grade copper and nickel mineralization was found near the eastern shore of Lake Tanganyika at Kungwe Bay in the early part of the twentieth century. The mineralization occurs in harzburgite at the base of a layered gabbro complex known as the Kapalagulu Intrusion, emplaced between the Paleoproterozoic Ubendian basement and overlying Neoproterozoic Itiaso Group metasediments. Several mining and exploration companies continued the geophysical and drilling exploration for base metals throughout the last century culminating in the discovery of high-grade platinum-group element (PGE) mineralization associated with chromitite and sulfide-bearing harzburgite within the southeastern extension of the Kapalagulu Intrusion (known as the Lubalisi Zone) that is covered by a layer of nickel-rich laterite regolith. The poorly layered southeastern harzburgite forms part of the >1500 m-thick Lower Ultramafic Sequence and resembles a dike-like body that flares upwards into a succession of well-layered gabbroic rocks of the Upper Mafic Sequence. No PGE mineralization has been found in the layered gabbro; all the mineralization is associated with the chromite- and sulfide-rich harzburgite of the Lower Ultramafic Sequence and the laterite regolith overlying the mineralized harzburgite. The Lubalisi Zone harzburgite is underlain by basal dunite and overlain by an interval of layered harzburgite and troctolite and this ultramafic sequence is folded into a syncline that plunges towards the northwest that has been modified by major dolerite-filled faults orientated subparallel to the fold axial surface. Extensive deep drilling in the Lubalisi Zone of the Kapalagulu Intrusion shows that the folded harzburgite can be subdivided into a lower feldspathic harzburgite, a harzburgite containing chromitite seams and intervals of sulfide and chromite mineralization known as the Main Chromite Sulfide Succession (MCSS), an overlying sulfide-rich harzburgite, and an upper feldspathic harzburgite

The enabling technology for recovery of valued components from minerals in the upper and Mid Amur region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorokin, A.P.; Rimkevich, V.S.; Dem'yanova, L.P.

2009-05-15

Based on the physico-technical operations involved in the mineral processing technologies, the optimal production conditions are found for refractory fiber materials, aluminium, silicium, their compounds and other valued components. Ecologically safe and efficient aggregate technologies are developed for recovery of valued components from nonmetallic minerals and anthracides (brown coals).

Tin-tungsten mineralizing processes in tungsten vein deposits: Panasqueira, Portugal

NASA Astrophysics Data System (ADS)

Lecumberri-Sanchez, P.; Pinto, F.; Vieira, R.; Wälle, M.; Heinrich, C. A.

2015-12-01

Tungsten has a high heat resistance, density and hardness, which makes it widely applied in industry (e.g. steel, tungsten carbides). Tungsten deposits are typically magmatic-hydrothermal systems. Despite the economic significance of tungsten, there are no modern quantitative analytical studies of the fluids responsible for the formation of its highest-grade deposit type (tungsten vein deposits). Panasqueira (Portugal) is a tungsten vein deposit, one of the leading tungsten producers in Europe and one of the best geologically characterized tungsten vein deposits. In this study, compositions of the mineralizing fluids at Panasqueira have been determined through combination of detailed petrography, microthermometric measurements and LA-ICPMS analyses, and geochemical modeling has been used to determine the processes that lead to tungsten mineralization. We characterized the fluids related to the various mineralizing stages in the system: the oxide stage (tin and tungsten mineralization), the sulfide stage (chalcopyrite and sphalerite mineralization) and the carbonate stage. Thus, our results provide information on the properties of fluids related with specific paragenetic stages. Furthermore we used those fluid compositions in combination with host rock mineralogy and chemistry to evaluate which are the controlling factors in the mineralizing process. This study provides the first quantitative analytical data on fluid composition for tungsten vein deposits and evaluates the controlling mineralization processes helping to determine the mechanisms of formation of the Panasqueira tin-tungsten deposit and providing additional geochemical constraints on the local distribution of mineralization.

Benchmark Analysis of Career and Technical Education in Lenawee County. Final Report.

ERIC Educational Resources Information Center

Hollenbeck, Kevin

The career and technical education (CTE) provided in grades K-12 in the county's vocational-technical center and 12 local public school districts of Lenawee County, Michigan, was benchmarked with respect to its attention to career development. Data were collected from the following sources: structured interviews with a number of key respondents…

Quick-start guide for version 3.0 of EMINERS - Economic Mineral Resource Simulator

USGS Publications Warehouse

Bawiec, Walter J.; Spanski, Gregory T.

2012-01-01

Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type (Singer and Menzie, 2010). The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. It is based upon a simulation program developed by Root and others (1992), who discussed many of the methods and algorithms of the program. Various versions of the original program (called "MARK3" and developed by David H. Root, William A. Scott, and Lawrence J. Drew of the USGS) have been published (Root, Scott, and Selner, 1996; Duval, 2000, 2012). The current version (3.0) of the EMINERS program is available as USGS Open-File Report 2004-1344 (Duval, 2012). Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques included in Camm (1991). EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer

High-Grading Lunar Samples

NASA Technical Reports Server (NTRS)

Allen, Carlton; Sellar, Glenn; Nunez, Jorge; Mosie, Andrea; Schwarz, Carol; Parker, Terry; Winterhalter, Daniel; Farmer, Jack

2009-01-01

Astronauts on long-duration lunar missions will need the capability to high-grade their samples to select the highest value samples for transport to Earth and to leave others on the Moon. We are supporting studies to define the necessary and sufficient measurements and techniques for high-grading samples at a lunar outpost. A glovebox, dedicated to testing instruments and techniques for high-grading samples, is in operation at the JSC Lunar Experiment Laboratory. A reference suite of lunar rocks and soils, spanning the full compositional range found in the Apollo collection, is available for testing in this laboratory. Thin sections of these samples are available for direct comparison. The Lunar Sample Compendium, on-line at http://www-curator.jsc.nasa.gov/lunar/compendium.cfm, summarizes previous analyses of these samples. The laboratory, sample suite, and Compendium are available to the lunar research and exploration community. In the first test of possible instruments for lunar sample high-grading, we imaged 18 lunar rocks and four soils from the reference suite using the Multispectral Microscopic Imager (MMI) developed by Arizona State University and JPL (see Farmer et. al. abstract). The MMI is a fixed-focus digital imaging system with a resolution of 62.5 microns/pixel, a field size of 40 x 32 mm, and a depth-of-field of approximately 5 mm. Samples are illuminated sequentially by 21 light emitting diodes in discrete wavelengths spanning the visible to shortwave infrared. Measurements of reflectance standards and background allow calibration to absolute reflectance. ENVI-based software is used to produce spectra for specific minerals as well as multi-spectral images of rock textures.

Leaching standards for mineral recycling materials--a harmonized regulatory concept for the upcoming German Recycling Decree.

PubMed

Susset, Bernd; Grathwohl, Peter

2011-02-01

In this contribution we give a first general overview of results of recent studies in Germany which focused on contaminant leaching from various materials and reactive solute transport in the unsaturated soil zone to identify the key factors for groundwater risk assessment. Based on these results we developed new and improved existing methods for groundwater risk assessment which are used to derive a new regulatory concept for the upcoming "Decree for the Requirements of the Use of Alternative Mineral Building Materials in Technical Constructions and for the Amendment of the Federal Soil Protection and Contaminated Sites Ordinance" of the German Federal Ministry of Environment. The new concept aims at a holistic and scientifically sound assessment of the use of mineral recycling materials (e.g., mineral waste, excavated soils, slag and ashes, recycling products, etc.) in technical constructions (e.g., road dams) and permanent applications (e.g., backfilling and landscaping) which is based on a mechanistic understanding of leaching and transport processes. Fundamental for risk assessment are leaching standards for the mineral recycling materials. For each application of mineral recycling materials specific maximum concentrations of a substance in the seepage water at the bottom of an application were calculated. Technical boundary conditions and policy conventions derived from the "German precautionary groundwater and soil protection policy" were accounted to prevent adverse environmental effects on the media soil and groundwater. This includes the concentration decline of highly soluble substances (e.g., chloride and sulphate), retardation or attenuation of solutes, accumulation of contaminants in sub-soils and the hydraulic properties of recycling materials used for specific applications. To decide whether the use of a mineral recycling material is possible in a specific application, the leaching qualities were evaluated based on column percolation tests with

Simulation of Rocket-Grade Kerosene Flowing in an Electrically Heated Experimental Apparatus

DTIC Science & Technology

2015-07-01

Technical Paper 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE Simulation of Rocket Kerosene Flowing in an Electrically Heated...rocket-grade kerosene (RP-2) flowing in an electrically heated tube is simulated. The model and boundary conditions are selected so as to simulate an...and Astronautics 1 Simulation of Rocket-Grade Kerosene Flowing in an Electrically Heated Experimental Apparatus Ananda Himansu1 and Matthew C

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sobecky, Patricia A; Taillefert, Martial

This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

Implementation plan for Bolivian Mineral Exploration Fund

USGS Publications Warehouse

Kirkemo, Harold

1978-01-01

Bolivia ranks second among world producers of tin and antimony, and first in bismuth production. Mineral exports in 1975 were valued at $314.2 million, nearly 60 percent of the value of all exports, and petroleum product exports totalled nearly $157 million, or 30 percent of the total. Tin accounted for 58 percent of the total value of metallic mineral exports. The central government derived about 19 percent of its total tax revenues in 1975 from the mining sector. The mining sector consists of the large, medium, and small mining subsectors, a classification established by the government. Individual operations are referred to as large, medium, or small depending upon the subsector into which they are classified. All large mining enterprises are owned and operated by a government corporation, COMIBOL; the medium and small operations are privately owned. COMIBOL's exports in 1975 were valued at $171.8 million or 70 percent of the total mineral exports; the medium mines accounted for $55.5 million or 23 percent, and the small mines for $17.5 million or 7 percent of the total. The combination of high operating costs, low productivity, inadequate ore reserves, and insufficient risk capital for exploration and development has led to the realization that there is an urgent need to improve the situation for mining in Bolivia. Proposals are being studied to revise the tax code, a program is underway to evaluate selected mineral deposits for possible exploration and development, and programs are under consideration to encourage minerals exploration. A minerals exploration plan is proposed which would offer technical and financial aid to various segments in the minerals field. A program, estimated to cost between $2 million and $2.5 million annually, and to be operated by a new agency in the Ministry of Mining and Metallurgy, is outlined.

Descriptive and grade-tonnage models of volcanogenic manganese deposits in oceanic environments; a modification

USGS Publications Warehouse

Mosier, Dan L.; Page, Norman J

1988-01-01

Four types of volcanogenic manganese deposits, distinguished on the basis of geologic, geochemical, and geophysical characteristics, appear to result from a combination of volcanic and hydrothermal processes related to hot-spring activity in oceanic environments. We compare these four desposit types, here called the Franciscan, Cuban, Olympic Peninsula, and Cyprus, with respect to host rocks, associated rocks, minerals, deposit shape, dimensions, volume, tonnage, grade, and mineral-deposit density (number of deposits per unit area). Franciscan-type deposits occur in obducted oceanic ridge and backarc marginal-basin environments, are associated with chert, shale, and graywacke aroun the margins of mafic volcanic centers, and have a median tonnage of 450 t and median grades of 36 weight percent Mn and less than 5.1 weight percent Fe. Cuban-type deposits occur in island-arc environments, are associated with tuff and limestone around domal structures or intrusions inferred to be volcanic centers, and have a median tonnage of 6,400 t and median grades of 39 weight percent Mn and less than 4.4 weight percent Fe. Olympic Peninsula-type deposits occur in obducted oceanic midplate settings, are associated with argillaceous limestone, argillite, and graywacke around mafic volcanic centers (seamounts or islands), and have a median tonnage of 340 t and median grades of 35 weight percent Mn and less than 6.5 weight percent Fe. Cyprus-type deposits occur in the same tectonic environments as Franciscan type but are associated with basalt, marl, chalk, silt, and chert off the ridge-axis position and have a median tonnage of 41,000 t and median grades of 33 weight percent Fe and 8 weight percent Mn. All these deposits are thin ellipsoids, concordant to the host rocks, but Cyprus-and Cuban-type deposits are larger than Franciscan- and Olympic Peninsula-type deposits. Except for Cyprus-type deposits, which are manganiferous iron (umber) deposits composed of hydrated iron and

Compilation of Mineral Resource Data for Mississippi Valley-Type and Clastic-Dominated Sediment-Hosted Lead-Zinc Deposits

USGS Publications Warehouse

Taylor, Ryan D.; Leach, David L.; Bradley, Dwight C.; Pisarevsky, Sergei A.

2009-01-01

This report contains a global compilation of the mineral resource data for sediment-hosted lead-zinc (SH Pb-Zn) deposits. Sediment-hosted lead-zinc deposits are historically the most significant sources of lead and zinc, and are mined throughout the world. The most important SH Pb-Zn deposits are hosted in clastic-dominated sedimentary rock sequences (CD Pb-Zn) that are traditionally called sedimentary exhalative (SEDEX) deposits, and those in carbonate-dominated sequences that are known as Mississippi Valley-type (MVT) Pb-Zn deposits. In this report, we do not include sandstone-Pb, sandstone-hosted Pb, or Pb-Zn vein districts such as those in Freiberg, Germany, or Coeur d'Alene, Idaho, because these deposits probably represent different deposit types (Leach and others, 2005). We do not include fracture-controlled deposits in which fluorite is dominant and barite typically abundant (for example, Central Kentucky; Hansonburg, N. Mex.) or the stratabound fluorite-rich, but also lead- and zinc-bearing deposits, such as those in southern Illinois, which are considered a genetic variant of carbonate-hosted Pb-Zn deposits (Leach and Sangster, 1993). This report updates the Pb, Zn, copper (Cu), and silver (Ag) grade and tonnage data in Leach and others (2005), which itself was based on efforts in the Canadian Geological Survey World Minerals Geoscience Database Project (contributions of D.F. Sangster to Sinclair and others, 1999). New geological or geochronological data, classifications of the tectonic environment in which the deposits formed, and key references to the geology of the deposits are presented in our report. Data for 121 CD deposits, 113 MVT deposits, and 6 unclassified deposits that were previously classified as either SEDEX or MVT in the Leach and others (2005) compilation, are given in appendix table A1. In some cases, mineral resource data were available only for total district resources, but not for individual mines within the district. For these

High-Pressure Minerals in Meteorites: Constraints on Shock Conditions and Duration

NASA Technical Reports Server (NTRS)

Sharp, Thomas G.

2004-01-01

The objective of this research was to better understand the conditions and duration of shock metamorphism in meteorites through microstructural and microanalytical characterization of high-pressure minerals. A) Continue to investigate the mineralogy and microstructures of melt-veins in a suite of chondritic samples ranging from shock grades S3 through S6 to determine how the mineral assemblages that crystallize at high-pressure and are related to shock grade. B) Investigate the chemical, mineralogical, and microstructural heterogeneities that occur across melt veins to interpret crystallization histories. C) Use static high-pressure experiments to simulate crystallization of melt veins for mineralogical and textural comparisons with the melt veins of naturally shocked samples. D) Characterize the compositions and defect microstructures of polycrystalline ringwoodite, wadsleyite, majorite, (Mg,Fe)Si03-ilmenite and (Mg,Fe)SiO3-perovskite in S6 samples to understand the mechanisms of phase transformations that occur during shock. These results will combined with kinetic data to constrain the time scales of kinetic processes. E) Investigate the transformations of metastable high-pressure minerals back to low- pressure forms to constrain post-shock temperatures and estimates of the peak shock pressure. Of these objectives, we have obtained publishable data on A, B and D. I am currently doing difficult high-pressure melting and quench experiments on an L chondrite known as Mbale. These experiments will provide additional constraints on the mineral assemblages that are produced during rapid quench of an L chondrite at pressures of 16 to 25 GPa. Results from published or nearly published research is presented below. Lists of theses, dissertations and publications are given below.

Native Language Processing using Exegy Text Miner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Compton, J

2007-10-18

Lawrence Livermore National Laboratory's New Architectures Testbed recently evaluated Exegy's Text Miner appliance to assess its applicability to high-performance, automated native language analysis. The evaluation was performed with support from the Computing Applications and Research Department in close collaboration with Global Security programs, and institutional activities in native language analysis. The Exegy Text Miner is a special-purpose device for detecting and flagging user-supplied patterns of characters, whether in streaming text or in collections of documents at very high rates. Patterns may consist of simple lists of words or complex expressions with sub-patterns linked by logical operators. These searches are accomplishedmore » through a combination of specialized hardware (i.e., one or more field-programmable gates arrays in addition to general-purpose processors) and proprietary software that exploits these individual components in an optimal manner (through parallelism and pipelining). For this application the Text Miner has performed accurately and reproducibly at high speeds approaching those documented by Exegy in its technical specifications. The Exegy Text Miner is primarily intended for the single-byte ASCII characters used in English, but at a technical level its capabilities are language-neutral and can be applied to multi-byte character sets such as those found in Arabic and Chinese. The system is used for searching databases or tracking streaming text with respect to one or more lexicons. In a real operational environment it is likely that data would need to be processed separately for each lexicon or search technique. However, the searches would be so fast that multiple passes should not be considered as a limitation a priori. Indeed, it is conceivable that large databases could be searched as often as necessary if new queries were deemed worthwhile. This project is concerned with evaluating the Exegy Text Miner installed in the New

Implementation of GPS Machine Controlled Grading - Phase III (2008) and Technical Training

DOT National Transportation Integrated Search

2009-02-01

Beginning in 2006, WisDOT and the Construction Material and Support Center (CMSC) at UW-Madison worked together to develop the specifications and the QA/QC procedures for GPS machine guidance on highway grading projects. These specifications and proc...

Florida Center for Reading Research (FCRR) Reading Assessment (FRA): Kindergarten to Grade 2. Technical Manual

ERIC Educational Resources Information Center

Foorman, Barbara R.; Petscher, Yaacov; Schatschneider, Chris

2015-01-01

The grades K-2 Florida Center for Reading Research (FCRR) Reading Assessment (FRA) consists of computer-adaptive alphabetic and oral language screening tasks that provide a Probability of Literacy Success (PLS) linked to grade-level performance (i.e., the 40th percentile) on the word reading (in kindergarten) or reading comprehension (in grades…

FRA funded grade crossing safety & trespass prevention research (June 2007 - present).

DOT National Transportation Integrated Search

2015-05-01

FRAs Office of R&D and Office of Railroad : Safety have been actively supporting highway-rail grade crossing safety and trespass : prevention research to improve safety. Below : is a list of technical reports and research results : from FRA-funded...

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

PubMed

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

Technical note: Mineralogical, chemical, morphological, and optical interrelationships of mineral dust re-suspensions

NASA Astrophysics Data System (ADS)

Engelbrecht, Johann P.; Moosmüller, Hans; Pincock, Samuel; Jayanty, R. K. M.; Lersch, Traci; Casuccio, Gary

2016-08-01

This paper promotes an understanding of the mineralogical, chemical, and physical interrelationships of re-suspended mineral dusts collected as grab samples from global dust sources. Surface soils were collected from arid regions, including the southwestern USA, Mali, Chad, Morocco, Canary Islands, Cabo Verde, Djibouti, Afghanistan, Iraq, Kuwait, Qatar, UAE, Serbia, China, Namibia, Botswana, Australia, and Chile. The < 38 µm sieved fraction of each sample was re-suspended in a chamber, from which the airborne mineral dust could be extracted, sampled, and analyzed. Instruments integrated into the entrainment facility included two PM10 and two PM2.5 filter samplers, a beta attenuation gauge for the continuous measurement of PM10 and PM2.5 particulate mass fractions, an aerodynamic particle size analyzer, and a three-wavelength (405, 532, 781 nm) photoacoustic instrument with integrating reciprocal nephelometer for monitoring absorption and scattering coefficients during the dust re-suspension process. Filter sampling media included Teflon® membrane and quartz fiber filters for chemical analysis and Nuclepore® filters for individual particle analysis by scanning electron microscopy (SEM). The < 38 µm sieved fractions were also analyzed by X-ray diffraction for their mineral content while the > 75, < 125 µm soil fractions were mineralogically assessed by optical microscopy. Presented here are results of the optical measurements, showing the interdependency of single-scattering albedos (SSA) at three different wavelengths and mineralogical content of the entrained dust samples. To explain the elevated concentrations of iron (Fe) and Fe / Al ratios in the soil re-suspensions, we propose that dust particles are to a large extent composed of nano-sized particles of micas, clays, metal oxides, and ions of potassium (K+), calcium (Ca2+), and sodium

Chemical and colloidal aspects of collectorless flotation behavior of sulfide and non-sulfide minerals.

PubMed

Aghazadeh, Sajjad; Mousavinezhad, Seyed Kamal; Gharabaghi, Mahdi

2015-11-01

Flotation has been widely used for separation of valuable minerals from gangues based on their surface characterizations and differences in hydrophobicity on mineral surfaces. As hydrophobicity of minerals widely differs from each other, their separation by flotation will become easier. Collectors are chemical materials which are supposed to make selectively valuable minerals hydrophobic. In addition, there are some minerals which based on their surface and structural features are intrinsically hydrophobic. However, their hydrophobicities are not strong enough to be floatable in the flotation cell without collectors such as sulfide minerals, coal, stibnite, and so forth. To float these minerals in a flotation cell, their hydrophobicity should be increased in specific conditions. Various parameters including pH, Eh, size distribution, mill types, mineral types, ore characterization, and type of reaction in flotation cells affect the hydrophobicity of minerals. Surface analysis results show that when sulfide minerals experience specific flotation conditions, the reactions on the surface of these minerals increase the amount of sulfur on the surface. These phenomenons improve the hydrophobicity of these minerals due to strong hydrophobic feature of sulfurs. Collectorless flotation reduces chemical material consumption amount, increases flotation selectivity (grade increases), and affects the equipment quantities; however, it can also have negative effects. Some minerals with poor surface floatability can be increased by adding some ions to the flotation system. Depressing undesirable minerals in flotation is another application of collectorless flotation.

Technical adequacy of growth estimates from a computer adaptive test: Implications for progress monitoring.

PubMed

Van Norman, Ethan R; Nelson, Peter M; Parker, David C

2017-09-01

Computer adaptive tests (CATs) hold promise to monitor student progress within multitiered systems of support. However, the relationship between how long and how often data are collected and the technical adequacy of growth estimates from CATs has not been explored. Given CAT administration times, it is important to identify optimal data collection schedules to minimize missed instructional time. We used simulation methodology to investigate how the duration and frequency of data collection influenced the reliability, validity, and precision of growth estimates from a math CAT. A progress monitoring dataset of 746 Grade 4, 664 Grade 5, and 400 Grade 6 students from 40 schools in the upper Midwest was used to generate model parameters. Across grades, 53% of students were female and 53% were White. Grade level was not as influential as the duration and frequency of data collection on the technical adequacy of growth estimates. Low-stakes decisions were possible after 14-18 weeks when data were collected weekly (420-540 min of assessment), 20-24 weeks when collected every other week (300-360 min of assessment), and 20-28 weeks (150-210 min of assessment) when data were collected once a month, depending on student grade level. The validity and precision of growth estimates improved when the duration and frequency of progress monitoring increased. Given the amount of time required to obtain technically adequate growth estimates in the present study, results highlight the importance of weighing the potential costs of missed instructional time relative to other types of assessments, such as curriculum-based measures. Implications for practice, research, as well as future directions are also discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Preliminary investigation of gold mineralization in the Pedro Dome-Cleary Summit area, Fairbanks district, Alaska

USGS Publications Warehouse

Pilkington, H.D.; Forbes, R.B.; Hawkins, D.B.; Chapman, R.M.; Swainbank, R.C.

1969-01-01

Anomalous gold values in mineralized veins and hydrothermally altered quartz-mica schist in the Pedro Dome-Cleary Summit area of the Fairbanks district suggest the presence of numerous small low- to high-grade lodes. Anomalous concentrations of gold were found to exist in the wall rocks adjacent to mineralized veins. In general, the gold concentration gradients in these wall rocks are much too steep to increase appreciably the mineable width of the veins. Anomalous gold values were also detected in bedrock samples taken by means of a power auger on the Murphy Dome Road along the southwest extension of the Pedro Dome-Cleary Summit mineralized belt.

Minerals Yearbook, volume I, Metals and Minerals

USGS Publications Warehouse

,

2018-01-01

The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

Testing of electrical equipment for a commercial grade dedication program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, J.L.; Srinivas, N.

1995-10-01

The availability of qualified safety related replacement parts for use in nuclear power plants has decreased over time. This has caused many nuclear power plants to purchase commercial grade items (CGI) and utilize the commercial grade dedication process to qualify the items for use in nuclear safety related applications. The laboratories of Technical and Engineering Services (the testing facility of Detroit Edison) have been providing testing services for verification of critical characteristics of these items. This paper presents an overview of the experience in testing electrical equipment with an emphasis on fuses.

Improvement of the Effectiveness of Motorist Warnings at Railroad-Highway Grade Crossings

DOT National Transportation Integrated Search

1977-02-01

Flashing red incandescent lamps have formed the primary motorist warning device at grade crossings for several decades, in spite of technical constraints that inherently limit the overall effectiveness possible. In this report an examination of appro...

Metallogenic belt and mineral deposit maps of northeast Asia

USGS Publications Warehouse

Obolenskiy, Alexander A.; Rodionov, Sergey M.; Dejidmaa, Gunchin; Gerel, Ochir; Hwang, Duk-Hwan; Miller, Robert J.; Nokleberg, Warren J.; Ogasawara, Masatsugu; Smelov, Alexander P.; Yan, Hongquan; Seminskiy, Zhan V.

2013-01-01

This report contains explanatory material and summary tables for lode mineral deposits and placer districts (Map A, sheet 1) and metallogenic belts of Northeast Asia (Maps B, C, and D on sheets 2, 3, and 4, respectively). The map region includes eastern Siberia, southeastern Russia, Mongolia, northeast China, and Japan. A large group of geologists—members of the joint international project, Major Mineral Deposits, Metallogenesis, and Tectonics of Northeast Asia—prepared the maps, tables, and introductory text. This is a cooperative project with the Russian Academy of Sciences, Mongolian Academy of Sciences, Mongolian National University, Ulaanbaatar, Mongolian Technical University, Mineral Resources Authority of Mongolia, Geological Research Institute, Jilin University, China Geological Survey, Korea Institute of Geoscience and Mineral Resources, Geological Survey of Japan, and U.S. Geological Survey. This report is one of a series of reports on the mineral resources, geodynamics, and metallogenesis of Northeast Asia. Companion studies include (1) a detailed geodynamics map of Northeast Asia (Parfenov and others, 2003); (2) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000); (3) a series of metallogenic belt maps (Obolenskiy and others, 2004); (4) location map of lode mineral deposits and placer districts of Northeast Asia (Ariunbileg and others, 2003b); (5) descriptions of metallogenic belts (Rodionov and others, 2004); (6) a database on significant metalliferous and selected nonmetalliferous lode deposits and selected placer districts (Ariunbileg and others, 2003a); and (7) a series of summary project publications (Ariunbileg and 74 others, 2003b).

Formation of secondary minerals in a lysimeter approach - A mineral-microbe interaction

NASA Astrophysics Data System (ADS)

Schäffner, F.; Merten, D.; De Giudici, G.; Beyer, A.; Akob, D. M.; Ricci, P. C.; Küsel, K.; Büchel, G.

2012-04-01

Heavy metal contamination of large areas due to uranium mining operations poses a serious long-term environmental problem. In the Ronneburg district (eastern Thuringia, Germany), leaching of low grade uranium bearing ores (uranium content < 300 g/t) occurred from 1972 to 1990 using acid mine drainage (AMD; pH 2.7-2.8) and diluted sulphuric acid (10 g/l). Secondary mineral phases like birnessite, todorokite and goethite occur within a natural attenuation process associated with enrichment of heavy metals, especially Cd, Ni, Co, Cu and Zn due to a residual contamination even after remediation efforts. To reveal the processes of secondary mineral precipitation in the field a laboratory lysimeter approach was set up under in situ-like conditions. Homogenized soil from the field site and pure quartz sand were used as substrates. In general, in situ measurements of redox potentials in the substrates showed highly oxidizing conditions (200-750 mV). Water was supplied to the lysimeter from below via a mariottés bottle containing contaminated groundwater from the field. Evaporation processes were allowed, providing a continuous flow of water. This led to precipitation of epsomite and probably aplowite on the top layer of substrate, similar to what is observed in field investigations. After 4 weeks, the first iron and manganese bearing secondary minerals became visible. Soil water samples were used to monitor the behaviour of metals within the lysimeter. Saturation indices (SI) for different secondary minerals were calculated with PHREEQC. The SI of goethite showed oversaturation with respect to the soil solution. SEM-EDX analyses and IR spectroscopy confirmed the formation of goethite. Geochemical data revealed that goethite formation was mainly dominated by Eh/pH processes and that heavy metals, e.g. Zn and U, could be enriched in this phase. Although Eh/pH data does not support formation of manganese minerals, Mn(II)-oxidizing bacteria (MOB) could be isolated from field

Confidentiality issues for medical data miners.

PubMed

Berman, Jules J

2002-01-01

The first task in any medical data mining effort is ensuring patient confidentiality. In the past, most data mining efforts ensured confidentiality by the dubious policy of withholding their raw data from colleagues and the public. A cursory review of medical informatics literature in the past decade reveals that much of what we have "learned" consists of assertions derived from confidential datasets unavailable for anyone's review. Without access to the original data, it is impossible to validate or improve upon a researcher's conclusions. Without access to research data, we are asked to accept findings as an act of faith, rather than as a scientific conclusion. This special issue of Artificial Intelligence in Medicine is devoted to medical data mining. The medical data miner has an obligation to conduct valid research in a way that protects human subjects. Today, data miners have the technical tools to merge large data collections and to distribute queries over disparate databases. In order to include patient-related data in shared databases, data miners will need methods to anonymize and deidentify data. This article reviews the human subject risks associated with medical data mining. This article also describes some of the innovative computational remedies that will permit researchers to conduct research AND share their data without risk to patient or institution.

The narwhal (Monodon monoceros) cementum-dentin junction: a functionally graded biointerphase.

PubMed

Grandfield, Kathryn; Chattah, Netta Lev-Tov; Djomehri, Sabra; Eidelmann, Naomi; Eichmiller, Frederick C; Webb, Samuel; Schuck, P James; Nweeia, Martin; Ho, Sunita P

2014-08-01

In nature, an interface between dissimilar tissues is often bridged by a graded zone, and provides functional properties at a whole organ level. A perfect example is a "biological interphase" between stratified cementum and dentin of a narwhal tooth. This study highlights the graded structural, mechanical, and chemical natural characteristics of a biological interphase known as the cementum-dentin junction layer and their effect in resisting mechanical loads. From a structural perspective, light and electron microscopy techniques illustrated the layer as a wide 1000-2000 μm graded zone consisting of higher density continuous collagen fiber bundles from the surface of cementum to dentin, that parallels hygroscopic 50-100 μm wide collagenous region in human teeth. The role of collagen fibers was evident under compression testing during which the layer deformed more compared to cementum and dentin. This behavior is reflected through site-specific nanoindentation indicating a lower elastic modulus of 2.2 ± 0.5 GPa for collagen fiber bundle compared to 3 ± 0.4 GPa for mineralized regions in the layer. Similarly, microindentation technique illustrated lower hardness values of 0.36 ± 0.05 GPa, 0.33 ± 0.03 GPa, and 0.3 ± 0.07 GPa for cementum, dentin, and cementum-dentin layer, respectively. Biochemical analyses including Raman spectroscopy and synchrotron-source microprobe X-ray fluorescence demonstrated a graded composition across the interface, including a decrease in mineral-to-matrix and phosphate-to-carbonate ratios, as well as the presence of tidemark-like bands with Zn. Understanding the structure-function relationships of wider tissue interfaces can provide insights into natural tissue and organ function. © IMechE 2014.

Agricultural produce grading and sorting system using color CCD and new color identification algorithm

NASA Astrophysics Data System (ADS)

Wang, Dongsheng; Zou, Jizuo; Yang, Yunping; Dong, Jianhua; Zhang, Yuanxiang

1996-10-01

A high-speed automatic agricultural produce grading and sorting system using color CCD and new color identification algorithm has been developed. In a typical application, the system can sort almonds into tow output grades according to their color. Almonds ar rich in 18 kinds of amino acids and 13 kinds of micro minerals and vitamins and can be made into almond drink. In order to ensure the drink quality, almonds must be sorted carefully before being made into a drink. Using this system, almonds can be sorted into two grades: up to grade and below grade almonds or foreign materials. A color CCD inspects the almonds passing on a conveyor of rotating rollers, a color identification algorithm grades almonds and distinguishes foreign materials from almonds. Employing an elaborately designed mechanism, the below grade almonds and foreign materials can be removed effectively from the raw almonds. This system can be easily adapted for inspecting and sorting other kinds of agricultural produce such as peanuts, beans tomatoes and so on.

A technical writing programme implemented in a first-year engineering course at KU Leuven

NASA Astrophysics Data System (ADS)

Heylen, Christel; Vander Sloten, Jos

2013-12-01

Technical communication and technical writing are important skills for the daily work-life of every engineer. In the first-year engineering programme at KU Leuven, a technical writing programme is implemented within the project-based course 'Problem Solving and Engineering Design'. This paper describes a case study for implementing a writing programme based on active learning methods and situated learning in large classes. The programme consists of subsequent cycles of instructions, learning by doing and reflection on received feedback. In addition, a peer-review assignment, together with an interactive lecture using clicking devices, is incorporated within the assignments of the second semester. A checklist of desired writing abilities makes it easier to grade the large number of papers. Furthermore, this ensures that all staff involved in the evaluation process uses the same criteria to grade and for providing feedback.

Final Technical Report: Mercury Release from Organic Matter (OM) and OM-Coated Mineral Surfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagy, Kathryn L.

2015-08-18

Chemical reactions between mercury, a neurotoxin, and sulfur, an essential nutrient, in the environment control to a large extent the distribution and amount of mercury available for uptake by living organisms. The largest reservoir of sulfur in soils is in living, decaying, and dissolved natural organic matter. The decaying and dissolved organic matter can also coat the surfaces of minerals in the soil. Mercury (as a divalent cation) can bind to the sulfur species in the organic matter as well as to the bare mineral surfaces, but the extent of binding and release of this mercury is not well understood.more » The goals of the research were to investigate fundamental relationships among mercury, natural organic matter, and selected minerals to better understand specifically the fate and transport of mercury in contaminated soils downstream from the Y-12 plant along East Fork Poplar Creek, Tennessee, and more generally in any contaminated soil. The research focused on (1) experiments to quantify the uptake and release of mercury from two clay minerals in the soil, kaolinite and vermiculite, in the presence and absence of dissolved organic matter; (2) release of mercury from cinnabar under oxic and anoxic conditions; (3) characterization of the forms of mercury in the soil using synchrotron X-ray absorption spectroscopic techniques; and, (4) determination of molecular forms of mercury in the presence of natural organic matter. We also leveraged funding from the National Science Foundation to (5) evaluate published approaches for determining sulfur speciation in natural organic matter by fitting X-ray Absorption Near Edge Structure (XANES) spectra obtained at the sulfur K-edge and apply optimized fitting schemes to new measurements of sulfur speciation in a suite of dissolved organic matter samples from the International Humic Substances Society. Lastly, in collaboration with researchers at the University of Colorado and the U.S. Geological Survey in Boulder

The measurement of radon working levels at a mineral separation pilot plant in Cox's Bazar, Bangladesh.

PubMed

Hamid Khan, M A; Chowdhury, M S

2003-10-01

Beach Sand Exploitation Centre at Cox's Bazar, Bangladesh, produces commercial grade concentrations of magnetite, ilmenite, zircon, etc., from the high-grade accumulations available along the beach and foredune of Cox's Bazar. Solid state nuclear track detectors (CR-39 foils) were used to determine indoor radon concentration of radioactive mineral sands and the technologically enhanced radiation level inside the pilot plant of the Centre. It is found that the concentrations at processed mineral stock areas are high, and the maximum concentration was found to be 2,103 +/- 331 Bq m(-3) (0.23 +/- 0.03 WL). The indoor concentration of radon and its decay products in the raw sand stock area and at other locations was in the range of 116 +/- 27 Bq m(-3) (0.03 +/- 0.003 WL) to 2,042 +/- 233 Bq m(-3) (0.22 +/- 0.03 WL).

Fire Safety's My Job. Eighth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the eighth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of eighth grade students, its objectives include: (1) focusing on technical aspects of fire hazards and detection, and (2) exploring fire hazards outside the home. Texas essential elements of…

An Old Chestnut Revisited: Teachers' Opinions and Attitudes toward Grading within a Competency Based Training Framework

ERIC Educational Resources Information Center

Richards, James

2014-01-01

The purpose of this study was to explore teachers' opinions with regard to the value and process of grading within a competency based training (CBT) framework, following the introduction of a formalised grading system at a specialist Technical and Further Education centre for hospitality and tourism training The data were gathered using a 16-item…

Modelling the mechanics of partially mineralized collagen fibrils, fibres and tissue

PubMed Central

Liu, Yanxin; Thomopoulos, Stavros; Chen, Changqing; Birman, Victor; Buehler, Markus J.; Genin, Guy M.

2014-01-01

Progressive stiffening of collagen tissue by bioapatite mineral is important physiologically, but the details of this stiffening are uncertain. Unresolved questions about the details of the accommodation of bioapatite within and upon collagen's hierarchical structure have posed a central hurdle, but recent microscopy data resolve several major questions. These data suggest how collagen accommodates bioapatite at the lowest relevant hierarchical level (collagen fibrils), and suggest several possibilities for the progressive accommodation of bioapatite at higher hierarchical length scales (fibres and tissue). We developed approximations for the stiffening of collagen across spatial hierarchies based upon these data, and connected models across hierarchies levels to estimate mineralization-dependent tissue-level mechanics. In the five possible sequences of mineralization studied, percolation of the bioapatite phase proved to be an important determinant of the degree of stiffening by bioapatite. The models were applied to study one important instance of partially mineralized tissue, which occurs at the attachment of tendon to bone. All sequences of mineralization considered reproduced experimental observations of a region of tissue between tendon and bone that is more compliant than either tendon or bone, but the size and nature of this region depended strongly upon the sequence of mineralization. These models and observations have implications for engineered tissue scaffolds at the attachment of tendon to bone, bone development and graded biomimetic attachment of dissimilar hierarchical materials in general. PMID:24352669

Gaining Ground in the Middle Grades: Why Some Schools Do Better. A Large-Scale Study of Middle Grades Practices and Student Outcomes. Technical Appendix B

ERIC Educational Resources Information Center

EdSource, 2010

2010-01-01

This appendix focuses on the descriptive statistics of the middle study schools that participated in the "Gaining Ground in the Middle Grades: Why Some Schools Do Better. A Large-Scale Study of Middle Grades Practices and Student Outcomes. Initial Research." This appendix contains the following figures: (1) Student…

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Code of Federal Regulations, 2010 CFR

2010-10-01

... patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest... locations, mineral patents, and mineral leasing within National Forest Wilderness are contained in parts...

Technical Feasibility Aspects of the Geothermal Resource Reporting Methodology (GRRM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badgett, Alex; Young, Katherine R; Dobson, Patrick F.

This paper reviews the technical assessment of the Geothermal Research Reporting Methodology (GRRM, http://en.openei.org/wiki/GRRM) being developed for reporting geothermal resources and project progress. The goal of the methodology is to provide the U.S. Department of Energy's Geothermal Technologies Office (GTO) with a consistent and comprehensible means of evaluating the impacts of its funding programs. The GRRM is designed to provide uniform assessment criteria for geothermal resource grades and developmental phases of geothermal resource exploration and development. This resource grade system provides information on twelve attributes of geothermal resource locations (e.g., temperature, permeability, land access) to indicate potential for geothermal development.more » The GTO plans to use these Protocols to help quantitatively identify the greatest barriers to geothermal development, develop measureable program goals that will have the greatest impact to geothermal deployment, objectively evaluate proposals based (in part) on a project's ability to contribute to program goals, monitor project progress, and report on GTO portfolio performance. The GRRM assesses three areas of geothermal potential: geological, socio-economic, and technical. Previous work and publications have discussed the work done on the geological aspects of this methodology (Young et al. 2015c); this paper details the development of the technical assessment of the GRRM. Technical development attributes considered include: reservoir management, drilling, logistics, and power conversion.« less

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

43 CFR 19.8 - Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest Wilderness. 19.8 Section 19.8 Public Lands: Interior... § 19.8 Prospecting, mineral locations, mineral patents, and mineral leasing within National Forest...

Can We Predict Technical Aptitude?: A Systematic Review.

PubMed

Louridas, Marisa; Szasz, Peter; de Montbrun, Sandra; Harris, Kenneth A; Grantcharov, Teodor P

2016-04-01

To identify background characteristics and cognitive tests that may predict surgical trainees' future technical performance, and therefore be used to supplement existing surgical residency selection criteria. Assessment of technical skills is not commonly incorporated as part of the selection process for surgical trainees in North America. Emerging evidence, however, suggests that not all trainees are capable of reaching technical competence. Therefore, incorporating technical aptitude into selection processes may prove useful. A systematic search was carried out of the MEDLINE, PsycINFO, and Embase online databases to identify all studies that assessed associations between surrogate markers of innate technical abilities in surgical trainees, and whether these abilities correlate with technical performance. The quality of each study was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluation system. A total of 8035 records were identified. After screening by title, abstract, and full text, 52 studies were included. Very few surrogate markers were found to predict technical performance. Significant associations with technical performance were seen for 1 of 23 participant-reported surrogate markers, 2 of 25 visual spatial tests, and 2 of 19 dexterity tests. The assessment of trainee Basic Performance Resources predicted technical performance in 62% and 75% of participants. To date, no single test has been shown to reliably predict the technical performance of surgical trainees. Strategies that rely on assessing multiple innate abilities, their interaction, and their relationship with technical skill may ultimately be more likely to serve as reliable predictors of future surgical performance.

Rapid growth of mineral deposits at artificial seafloor hydrothermal vents

PubMed Central

Nozaki, Tatsuo; Ishibashi, Jun-Ichiro; Shimada, Kazuhiko; Nagase, Toshiro; Takaya, Yutaro; Kato, Yasuhiro; Kawagucci, Shinsuke; Watsuji, Tomoo; Shibuya, Takazo; Yamada, Ryoichi; Saruhashi, Tomokazu; Kyo, Masanori; Takai, Ken

2016-01-01

Seafloor massive sulphide deposits are potential resources for base and precious metals (Cu-Pb-Zn ± Ag ± Au), but difficulties in estimating precise reserves and assessing environmental impacts hinder exploration and commercial mining. Here, we report petrological and geochemical properties of sulphide chimneys less than 2 years old that formed where scientific boreholes vented hydrothermal fluids in the Iheya-North field, Okinawa Trough, in East China Sea. One of these infant chimneys, dominated by Cu-Pb-Zn-rich sulphide minerals, grew a height of 15 m within 25 months. Portions of infant chimneys are dominated by sulphate minerals. Some infant chimneys are sulphide-rich similar to high-grade Cu-Pb-Zn bodies on land, albeit with relatively low As and Sb concentrations. The high growth rate reaching the 15 m height within 25 months is attributed to the large hydrothermal vent more than 50 cm in diameter created by the borehole, which induced slow mixing with the ambient seawater and enhanced efficiency of sulphide deposition. These observations suggest the possibility of cultivating seafloor sulphide deposits and even controlling their growth and grades through manipulations of how to mix and quench hydrothermal fluids with the ambient seawater. PMID:26911272

Technical Adequacy of Early Numeracy Curriculum-Based Progress Monitoring Measures for Kindergarten and First-Grade Students

ERIC Educational Resources Information Center

Hampton, David D.; Lembke, Erica S.; Lee, Young-Sun; Pappas, Sandra; Chiong, Cynthia; Ginsburg, Herbert P.

2012-01-01

The purpose of this study was to examine six early numeracy measures used to monitor the mathematics progress of kindergarten and first-grade students. Seventy-one kindergarten students and 75 first-grade students were administered the measures each week. Delayed-alternate form reliability was adequate for instructional decision making on some…

Gold grade distribution within an epithermal quartz vein system, Kestanelik, NW Turkey: implications for gold exploration

NASA Astrophysics Data System (ADS)

Gulyuz, Nilay; Shipton, Zoe; Gulyuz, Erhan; Lord, Richard; Kaymakci, Nuretdin; Kuscu, İlkay

2017-04-01

Vein-hosted gold deposits contribute a large part to the global gold production. Discovery of these deposits mainly include drilling of hundreds of holes, collecting thousands of soil and rock samples and some geophysical surveys which are expensive and time consuming. Understanding the structures hosting the veins and the variations in gold concentrations within the veins is crucial to constrain a more economic exploration program. The main aim of this study is to investigate the gold grade distribution in the mineralized quartz veins of a well exposed epithermal gold deposit hosted by Paleozoic schist and Eocene quartz-feldspar-hornblende porphyry in Lapseki, NW Turkey. We have constructed 3D architecture of the vein surfaces by mapping their outcrop geometries using a highly sensitive Trimble GPS, collecting detailed field data, well-logs and geochemistry data from 396 drill holes (255 diamond cut and 141 reverse circulation holes). Modelling was performed in MOVE Structural Modelling and Analysis software granted by Midland Valley's Academic Software Initiative, and GIS application softwares Global Mapper and Esri-ArcGIS. We envisaged that while fluid entering the conduit ascents, a sudden thickness increase in the conduit would lead to a drop in the fluid pressure causing boiling (the most dominant gold precipitation mechanism) and associated gold precipitation. Regression analysis was performed between the orthogonal thickness values and gold grades of each vein, and statistical analyses were performed to see if the gold is concentrated at specific structural positions along dip. Gold grades in the alteration zones were compared to those in the adjacent veins to understand the degree of mineralization in alteration zones. A possible correlation was also examined between the host rock type and the gold grades in the veins. These studies indicated that gold grades are elevated in the adjacent alteration zones where high gold grades exist in the veins. Schist

High School Graduation Minimum Competency Requirements. Final Technical Report.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

This technical report details the testing results and analyses supporting the evaluation findings related to the Austin (Texas) Independent School District (AISD) minimum competency graduation requirements. The graduation competency status of all AISD students in grades 8 to 12 are documented. The report provides additional information on the data…

Conceptual Connections in Teaching of Technical Education and Physics

ERIC Educational Resources Information Center

Antonijevic, Radovan

2006-01-01

This paper considers the main characteristics of contents' connections between technical education and physics curricula, in the sixth, seventh and eighth grade of the Serbian primary school. The undertaken logical and didactic analyses of interconnectedness between contents structure of the two school subjects are based upon comparisons which…

Mineral resources of the Mormon Mountains Wilderness Study Area, Lincoln County, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shawe, D.R.; Blank, H.R. Jr.; Wernicke, B.P.

1988-01-01

The U.S. Bureau of Mines and the U.S. Geological Survey conducted investigations to appraise the identified resources and to assess the potential for undiscovered resources of the Mormon Mountains Wilderness Study Area, southeastern Nevada. There are no identified resources in or near the study area; however, there are no occurrences of commercial-grade limestones and sand gravel. The study area has high mineral resource potential for copper, lead, zinc, silver, and (or) gold in its southern part and copper, lead, zinc, silver, gold, arsenic, and (or) antimony in its northern part. Part of the study area has moderate mineral resource potentialmore » for antimony. Two areas in the central part of the study area have moderate mineral resource potential for molybdenum, tungsten, and (or) tin. The study area has moderate energy resource potential for oil and gas, except for areas of low potential where significant hydrothermal activity has occurred. It has low mineral and energy resource potential for manganese, barite, vermiculite, coal, and geothermal energy.« less

Towards zero waste production in the minerals and metals sector

NASA Astrophysics Data System (ADS)

Rankin, William J.

The production of mineral and metal commodities results in large quantities of wastes (solid, liquid and gaseous) at each stage of value-adding — from mining to manufacturing. Waste production (both consumer and non-consumer) is a major contributor to environmental degradation. Approaches to waste management in the minerals industry are largely `after the event'. These have moved progressively from foul-and-flee to dilute-and-disperse to end end-of-pipe treatments. There is now a need to move to approaches which aim to reduce or eliminate waste production at source. Modern waste management strategies include the application of cleaner production principles, the use of wastes as raw materials, the reengineering of process flowsheets to minimise waste production, and use of industrial symbioses through industrial ecology to convert wastes into useful by-products. This paper examines how these can be adopted by the minerals industry, with some recent examples. The financial, technical, systemic and regulatory drivers and barriers are also examined.

A portable fiber-optic raman spectrometer concept for evaluation of mineral content within enamel tissue.

PubMed

Akkus, Anna; Yang, Shan; Roperto, Renato; Mustafa, Hathem; Teich, Sorin; Akkus, Ozan

2017-02-01

Measurement of tooth enamel mineralization using a clinically viable method is essential since variation of mineralization may be used to monitor caries risk or in assessing the effectiveness of remineralization therapy. Fiber optic Raman systems are becoming more affordable and popular in context of biomedical applications. However, the applicability of fiber optic Raman systems for measurement of mineral content within enamel tissue has not been elucidated significantly in the prior literature. Human teeth with varying degrees of enamel mineralization were selected. In addition alligator, boar and buffalo teeth which have increasing amount of mineral content, respectively, were also included as another set of samples. Reference Raman measurements of mineralization were performed using a high-fidelity confocal Raman microscope. Analysis of human teeth by research grade Raman system indicated a 2-fold difference in the Raman intensities of v1 symmetric-stretch bands of mineral-related phosphate bonds and 7-fold increase in mineral related Raman intensities of animal teeth. However, fiber optic system failed to resolve the differences in the mineralization of human teeth. These results indicate that the sampling volume of fiber optic systems extends to the underlying dentin and that confocal aperture modification is essential to limit the sampling volume to within the enamel. Further research efforts will focus on putting together portable Raman systems integrated with confocal fiber probe. Key words: Enamel, mineral content, raman spectroscopy.

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

Mineral composition of lamb carcasses from the United States and New Zealand.

PubMed

Lin, K C; Cross, H R; Johnson, H K; Breidenstein, B C; Randecker, V; Field, R A

1988-01-01

The mineral composition-iron (Fe), zinc (Zn), copper (Cu), calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), fluoride (F), and phosphorus (P) (New Zealand lamb only)-of lean tissue from lamb retail cuts was studied. Twenty-four US lamb carcasses of different ages (5 to 11 months), geographical regions (Texas, Colorado and Montana) and USDA quality grades (Prime and Choice) and 27 New Zealand lamb carcasses from three weight groups (11 to 12·5 kg, 13 to 14·5 kg, and 16·5 to 18 kg), age rangining from 7 to 8 months, were selected for use in this study. Mineral concentrations were influenced more by retail cut and age than by quality grade or weigth group. Foreshank and shoulder cuts from both the US and New Zealand group consistently had the highest (P < 0·05) Zn content among the cuts. The K content of the muscle in US lambs increased as age increased, while the level of Ca and Zn in New Zealand lambs decreased as carcass weight increased. Except for Ca, the mineral concentrations of the lean tissue from US lambs were higher than the New Zealand lambs, although the differences were not always significant. US lambs had approximately 20%, 30% and 37% more Fe, Zn and Mg, respectively, but 27% less Ca than lean tissue from the New Zealand lambs. Copyright © 1989. Published by Elsevier Ltd.

Reconnaissance geochemical survey of the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia

USGS Publications Warehouse

Samater, R.M.; Johnson, P.R.; Bookstrom, A.A.

1991-01-01

In the present survey, geochemical anomalies locate all the sites of mineralization known from previous work. The survey is therefore technically a success. However, a large number of these anomalies probably result from contamination of the wadi systems by metal dispersed from ancient mine workings, and this particular survey, overall, may be of limited value as a guide to the discovery of hitherto unknown mineralization. Nevertheless, the survey outlines two areas that may mark extensions to known mineralization, and a number of other areas in which no mineralization is known. Based on a consideration of the character of the bedrock geology, the value of each reported analytical result in relation to the respective element thresholds, and the number of anomalous samples that cluster in any given area, four areas are recommended for high-priority follow-up sampling.

Graded changes in enamel component volumes resulted from a short tooth bleaching procedure.

PubMed

Ferreira, Artemisa Fernanda Moura; Perez, Flávia Maria de Moraes Ramos; Limeira Júnior, Francisco de Assis; de Moura, Mirella de Fátima Liberato; de Sousa, Frederico Barbosa

2016-05-01

To test the hypothesis that changes in enamel component volumes (mineral, organic, and water volumes, and permeability) are graded from outer to inner enamel after a short bleaching procedure. Extracted unerupted human third molars had half of their crowns bleached (single bleaching session, 3 × 15 min), and tooth shade changes in bleached parts were analyzed with a spectrophotometer. Ground sections were prepared, component volumes and permeability were quantified at histological points located at varying distances from the enamel surface (n=10 points/location), representing conditions before and after bleaching. Tooth shade changes were significant (p<0.001; 95% CI=-1/-8; power=99%), and most of the enamel layer was unaffected after bleaching, except at the outer layers. Multiple analysis of covariances revealed that most of the variance of the change in enamel composition after bleaching was explained by the combination of the set of types of component volume (in decreasing order of relevance: mineral loss, organic gain, water gain, and decrease in permeability) with the set of distances from the enamel surface (graded from the enamel surface inward) (canonical R(2)=0.97; p<0.0001; power>99%). Changes in enamel composition after a short bleaching procedure followed a gradient within component volumes (mineral loss>organic gain>water gain>decrease in permeability) and decreased from the enamel surface inward. Copyright © 2016 Elsevier Ltd. All rights reserved.

Developing and Evaluating a Kindergarten to Third Grade CBM Mathematics Assessment

ERIC Educational Resources Information Center

Lee, Young-Sun; Lembke, Erica

2016-01-01

The present study examined the technical adequacy of curriculum-based measurement (CBM) measure of early numeracy for kindergarten through third grade students. Our CBM measures were developed to reflect broad and theoretically derived categories of mathematical thinking: quick retrieval, written computation, and number sense. The mastery of these…

The Predictive Validity of CBM Writing Indices for Eighth-Grade Students

ERIC Educational Resources Information Center

Amato, Janelle M.; Watkins, Marley W.

2011-01-01

Curriculum-based measurement (CBM) is an alternative to traditional assessment techniques. Technical work has begun to identify CBM writing indices that are psychometrically sound for monitoring older students' writing proficiency. This study examined the predictive validity of CBM writing indices in a sample of 447 eighth-grade students.…

Using Word Identification Fluency to Monitor First-Grade Reading Development

ERIC Educational Resources Information Center

Zumeta, Rebecca O.; Compton, Donald L.; Fuchs, Lynn S.

2012-01-01

This study assessed the effects of sampling breadth on technical features of word identification fluency (WIF), a tool for screening and monitoring the reading development of first graders. From a potential pool of 704 first-grade students, the authors measured both a representative sample (n = 284) and 2 other subgroups: those with low reading…

Mineral resource potential map of the Bighorn Mountains Wilderness Study Area (CDCA-217), San Bernardino County, California

USGS Publications Warehouse

Matti, Jonathan C.; Cox, Brett F.; Rodriguez, Eduardo A.; Obi, Curtis M.; Powell, Robert E.; Hinkle, Margaret E.; Griscom, Andrew; Sabine, Charles; Cwick, Gary J.

1982-01-01

Geological, geochemical, and geophysical evidence, together with a review of historical mining and prospecting activities, suggests that most of the Bighorn Mountains Wilderness Study Area has low potential for the discovery of all types of mineral and energy resources-including precious and base metals, building stone and aggregate, fossil fuels, radioactive-mineral resources, and geothermal resources. Low-grade mineralization has been documented in one small area near Rattlesnake Canyon, and this area has low to moderate potential for future small-scale exploration and development of precious and base metals. Thorium and uranium enrichment have been documented in two small areas in the eastern part of the wilderness study area; these two areas have low to moderate potential for future small-scale exploration and development of radioactive-mineral resources.

Innovation processes in technologies for the processing of refractory mineral raw materials

NASA Astrophysics Data System (ADS)

Chanturiya, V. A.

2008-12-01

Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

Minerals

MedlinePlus

Minerals are important for your body to stay healthy. Your body uses minerals for many different jobs, including keeping your bones, muscles, heart, and brain working properly. Minerals are also important for making enzymes and hormones. ...

Technical Efficiency and Productivity for Higher Education Institutions in Sweden

ERIC Educational Resources Information Center

Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

2017-01-01

This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

An analysis of science instruction in the fifth-grade science classroom: Investigating activity-based instruction with student-generated discussion

NASA Astrophysics Data System (ADS)

Vowell, Julie E.

The purpose of this study was to determine the extent to which debriefing impacts the level of cognitive understanding among students in the fifth-grade science classroom. This mixed methods study involved two fifth-grade science classrooms (N = 39) in a one month exploration of rocks and minerals. Two fifth-grade science classrooms participated in a unit using identical content, but had different pedagogical orientations. The experimental class was taught using the "Do-Talk-Do-Debrief" instructional method and the control class was taught using the "Do-Talk-Do" instructional method without the "Debrief" (metacognitive component). Research for the quantitative portion of this study was conducted using a pretest-posttest control-group design. The design was used to test the hypothesized relationship between an activity-based instructional method with debriefing and students' achievement. Two intact, equivalent fifth-grade classes were randomly assigned to treatment and control conditions. Prior to the beginning of the study, a researcher-developed pretest was administered to all participants to assess the students' prior knowledge of rocks and minerals. A posttest measure was given to the participants upon conclusion of the unit to measure knowledge and understanding. Following the posttest, the participants did not receive additional instruction over rocks and minerals. A similar posttest was administered to both groups two weeks later as an added measure for retention. A t-test for independent samples was used to examine differences on the pretest between the experimental and control groups. Likewise, a t-test was used to compare the mean scores on the first posttest (achievement). A separate t-test was conducted on the second posttest (retention) and was followed by a Pearson Product Moment Correlation, conducted by group. Research for the qualitative portion of this study involved classroom observations throughout the rock and mineral unit followed by a teacher

Development of a framework for resilience measurement: Suggestion of fuzzy Resilience Grade (RG) and fuzzy Resilience Early Warning Grade (REWG).

PubMed

Omidvar, Mohsen; Mazloumi, Adel; Mohammad Fam, Iraj; Nirumand, Fereshteh

2017-01-01

Resilience engineering (RE) can be an alternative technique to the traditional risk assessment and management techniques, to predict and manage safety conditions of modern socio-technical organizations. While traditional risk management approaches are retrospective and highlight error calculation and computation of malfunction possibilities, resilience engineering seeks ways to improve capacity at all levels of organizations in order to build strong yet flexible processes. Considering the resilience potential measurement as a concern in complex working systems, the aim of this study was to quantify the resilience by the help of fuzzy sets and Multi-Criteria Decision-Making (MCDM) techniques. In this paper, we adopted the fuzzy analytic hierarchy process (FAHP) method to measure resilience in a gas refinery plant. A resilience assessment framework containing six indicators, each with its own sub-indicators, was constructed. Then, the fuzzy weights of the indicators and the sub-indicators were derived from pair-wise comparisons conducted by experts. The fuzzy evaluating vectors of the indicators and the sub-indicators computed according to the initial assessment data. Finally, the Comprehensive Resilience Index (CoRI), Resilience Grade (RG), and Resilience Early Warning Grade (REWG) were established. To demonstrate the applicability of the proposed method, an illustrative example in a gas refinery complex (an instance of socio-technical systems) was provided. CoRI of the refinery ranked as "III". In addition, for the six main indicators, RG and REWG ranked as "III" and "NEWZ", respectively, except for C3, in which RG ranked as "II", and REWG ranked as "OEWZ". The results revealed the engineering practicability and usefulness of the proposed method in resilience evaluation of socio-technical systems.

Training and Education of Financial Management Company Grade Officers

DTIC Science & Technology

2010-11-22

NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) COL Patricia O’Keefe Department of Command, Leadership , and...GRADE OFFICERS by Colonel Randy Stevens United States Army Colonel Patricia O‟ Keefe Project Adviser This SRP...of the mission have the proper technical and leadership skill requisites. Coupled with this is the expectation that leaders must be able to deal

The mineralogy of bauxite for producing smelter-grade alumina

NASA Astrophysics Data System (ADS)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

Evaluation of Different Mineral Filler Aggregates for Asphalt Mixtures

NASA Astrophysics Data System (ADS)

Wasilewska, Marta; Małaszkiewicz, Dorota; Ignatiuk, Natalia

2017-10-01

Mineral filler aggregates play an important role in asphalt mixtures because they fill voids in paving mix and improve the cohesion of asphalt binder. Limestone powder containing over 90% of CaCO3 is the most frequently used type of filler. Waste material from the production of coarse aggregate can be successfully used as a mineral filler aggregate for hot asphalt concrete mixtures as the limestone powder replacement. This paper presents the experimental results of selected properties of filler aggregates which were obtained from rocks with different mineral composition and origin. Five types of rocks were used as a source of the mineral filler aggregate: granite, gabbro, trachybasalt, quartz sandstone and rocks from postglacial deposits. Limestone filler was used in this study as the reference material. The following tests were performed: grading (air jet sieving), quality of fines according to methylene blue test, water content by drying in a ventilated oven, particle density using pyknometer method, Delta ring and ball test, Bitumen Number, fineness determined as Blaine specific surface area. Mineral filler aggregates showed significant differences when they were mixed with bitumen and stiffening effect in Delta ring and ball test was evaluated. The highest values were achieved when gabbro and granite fillers were used. Additionally, Scanning Electron Microscopy (SEM) analysis of grain shape and size was carried out. Significant differences in grain size and shape were observed. The highest non-homogeneity in size was determined for quartz sandstone, gabbro and granite filler. Their Blaine specific surface area was lower than 2800 cm2/g, while for limestone and postglacial fillers with regular and round grains it exceeded 3000 cm2/g. All examined mineral filler aggregates met requirements of Polish National Specification WT-1: 2014 and could be used in asphalt mixtures.

36 CFR 293.14 - Mineral leases and mineral permits.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Mineral leases and mineral... AGRICULTURE WILDERNESS-PRIMITIVE AREAS § 293.14 Mineral leases and mineral permits. (a) All laws pertaining to mineral leasing shall extend to each National Forest Wilderness for the period specified in the Wilderness...

36 CFR 293.14 - Mineral leases and mineral permits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Mineral leases and mineral... AGRICULTURE WILDERNESS-PRIMITIVE AREAS § 293.14 Mineral leases and mineral permits. (a) All laws pertaining to mineral leasing shall extend to each National Forest Wilderness for the period specified in the Wilderness...

36 CFR 293.14 - Mineral leases and mineral permits.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Mineral leases and mineral... AGRICULTURE WILDERNESS-PRIMITIVE AREAS § 293.14 Mineral leases and mineral permits. (a) All laws pertaining to mineral leasing shall extend to each National Forest Wilderness for the period specified in the Wilderness...

36 CFR 293.14 - Mineral leases and mineral permits.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Mineral leases and mineral... AGRICULTURE WILDERNESS-PRIMITIVE AREAS § 293.14 Mineral leases and mineral permits. (a) All laws pertaining to mineral leasing shall extend to each National Forest Wilderness for the period specified in the Wilderness...

36 CFR 293.14 - Mineral leases and mineral permits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Mineral leases and mineral... AGRICULTURE WILDERNESS-PRIMITIVE AREAS § 293.14 Mineral leases and mineral permits. (a) All laws pertaining to mineral leasing shall extend to each National Forest Wilderness for the period specified in the Wilderness...

The origin of conodonts and of vertebrate mineralized skeletons

USGS Publications Warehouse

Murdock, Duncan J.E.; Dong, Xi-Ping; Repetski, John E.; Marone, Federica; Stampanoni, Marco; Donoghue, Philip C.J.

2013-01-01

Conodonts are an extinct group of jawless vertebrates whose tooth-like elements are the earliest instance of a mineralized skeleton in the vertebrate lineage, inspiring the ‘inside-out’ hypothesis that teeth evolved independently of the vertebrate dermal skeleton and before the origin of jaws. However, these propositions have been based on evidence from derived euconodonts. Here we test hypotheses of a paraconodont ancestry of euconodonts using synchrotron radiation X-ray tomographic microscopy to characterize and compare the microstructure of morphologically similar euconodont and paraconodont elements. Paraconodonts exhibit a range of grades of structural differentiation, including tissues and a pattern of growth common to euconodont basal bodies. The different grades of structural differentiation exhibited by paraconodonts demonstrate the stepwise acquisition of euconodont characters, resolving debate over the relationship between these two groups. By implication, the putative homology of euconodont crown tissue and vertebrate enamel must be rejected as these tissues have evolved independently and convergently. Thus, the precise ontogenetic, structural and topological similarities between conodont elements and vertebrate odontodes appear to be a remarkable instance of convergence. The last common ancestor of conodonts and jawed vertebrates probably lacked mineralized skeletal tissues. The hypothesis that teeth evolved before jaws and the inside-out hypothesis of dental evolution must be rejected; teeth seem to have evolved through the extension of odontogenic competence from the external dermis to internal epithelium soon after the origin of jaws.

Cost effective nuclear commercial grade dedication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maletz, J.J.; Marston, M.J.

1991-01-01

This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurementmore » activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs.« less

Computer Education Curriculum. Connecticut Vocational Technical School System. Version 4.

ERIC Educational Resources Information Center

Kittell, Linda; Walczak, Joseph

This computer education curriculum is designed specifically for Connecticut's Regional Vocational Technical Schools' grade 9 computer education course. Each of the 24 lessons is expected to cover at least one class period of 50 minutes. Introductory materials include a listing of course goals and objectives, an outline of sequence and scope via…

An Index to PGE-Ni-Cr Deposits and Occurrences in Selected Mineral-Occurrence Databases

USGS Publications Warehouse

Causey, J. Douglas; Galloway, John P.; Zientek, Michael L.

2009-01-01

Databases of mineral deposits and occurrences are essential to conducting assessments of undiscovered mineral resources. In the USGS's (U.S. Geological Survey) global assessment of undiscovered resources of copper, potash, and the platinum-group elements (PGE), only a few mineral deposit types will be evaluated. For example, only porphyry-copper and sediment-hosted copper deposits will be considered for the copper assessment. To support the global assessment, the USGS prepared comprehensive compilations of the occurrences of these two deposit types in order to develop grade and tonnage models and delineate permissive areas for undiscovered deposits of those types. This publication identifies previously published databases and database records that describe PGE, nickel, and chromium deposits and occurrences. Nickel and chromium were included in this overview because of the close association of PGE with nickel and chromium mineralization. Users of this database will need to refer to the original databases for detailed information about the deposits and occurrences. This information will be used to develop a current and comprehensive global database of PGE deposits and occurrences.

IRT Analysis of General Outcome Measures in Grades 1-8. Technical Report # 0916

ERIC Educational Resources Information Center

Alonzo, Julie; Anderson, Daniel; Tindal, Gerald

2009-01-01

We present scaling outcomes for mathematics assessments used in the fall to screen students at risk of failing to learn the knowledge and skills described in the National Council of Teachers of Mathematics (NCTM) Focal Point Standards. At each grade level, the assessment consisted of a 48-item test with three 16-item sub-test sets aligned to the…

Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

PubMed

Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

2017-03-01

The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P < .001). Of a total possible score of 14 using the HONcode analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and

The mineral economy of Brazil--Economia mineral do Brasil

USGS Publications Warehouse

Gurmendi, Alfredo C.; Barboza, Frederico Lopes; Thorman, Charles H.

1999-01-01

This study depicts the Brazilian government structure, mineral legislation and investment policy, taxation, foreign investment policies, environmental laws and regulations, and conditions in which the mineral industry operates. The report underlines Brazil's large and diversified mineral endowment. A total of 37 mineral commodities, or groups of closely related commodities, is discussed. An overview of the geologic setting of the major mineral deposits is presented. This report is presented in English and Portuguese in pdf format.

Neurosurgical Skills Assessment: Measuring Technical Proficiency in Neurosurgery Residents Through Intraoperative Video Evaluations.

PubMed

Sarkiss, Christopher A; Philemond, Steven; Lee, James; Sobotka, Stanislaw; Holloway, Terrell D; Moore, Maximillian M; Costa, Anthony B; Gordon, Errol L; Bederson, Joshua B

2016-05-01

Although technical skills are fundamental in neurosurgery, there is little agreement on how to describe, measure, or compare skills among surgeons. The primary goal of this study was to develop a quantitative grading scale for technical surgical performance that distinguishes operator skill when graded by domain experts (residents, attendings, and nonsurgeons). Scores provided by raters should be highly reliable with respect to scores from other observers. Neurosurgery residents were fitted with a head-mounted video camera while performing craniotomies under attending supervision. Seven videos, 1 from each postgraduate year (PGY) level (1-7), were anonymized and scored by 16 attendings, 8 residents, and 7 nonsurgeons using a grading scale. Seven skills were graded: incision, efficiency of instrument use, cauterization, tissue handling, drilling/craniotomy, confidence, and training level. A strong correlation was found between skills score and PGY year (P < 0.001, analysis of variance). Junior residents (PGY 1-3) had significantly lower scores than did senior residents (PGY 4-7, P < 0.001, t test). Significant variation among junior residents was observed, and senior residents' scores were not significantly different from one another. Interrater reliability, measured against other observers, was high (r = 0.581 ± 0.245, Spearman), as was assessment of resident training level (r = 0.583 ± 0.278, Spearman). Both variables were strongly correlated (r = 0.90, Pearson). Attendings, residents, and nonsurgeons did not score differently (P = 0.46, analysis of variance). Technical skills of neurosurgery residents recorded during craniotomy can be measured with high interrater reliability. Surgeons and nonsurgeons alike readily distinguish different skill levels. This type of assessment could be used to coach residents, to track performance over time, and potentially to compare skill levels. Developing an objective tool to evaluate surgical performance would be useful

Lunar mineral feedstocks from rocks and soils: X-ray digital imaging in resource evaluation

NASA Technical Reports Server (NTRS)

Chambers, John G.; Patchen, Allan; Taylor, Lawrence A.; Higgins, Stefan J.; Mckay, David S.

1994-01-01

The rocks and soils of the Moon provide raw materials essential to the successful establishment of a lunar base. Efficient exploitation of these resources requires accurate characterization of mineral abundances, sizes/shapes, and association of 'ore' and 'gangue' phases, as well as the technology to generate high-yield/high-grade feedstocks. Only recently have x-ray mapping and digital imaging techniques been applied to lunar resource evaluation. The topics covered include inherent differences between lunar basalts and soils and quantitative comparison of rock-derived and soil-derived ilmenite concentrates. It is concluded that x-ray digital-imaging characterization of lunar raw materials provides a quantitative comparison that is unattainable by traditional petrographic techniques. These data are necessary for accurately determining mineral distributions of soil and crushed rock material. Application of these techniques will provide an important link to choosing the best raw material for mineral beneficiation.

Electromagnetic system for detection and localization of miners caught in mine accidents

NASA Astrophysics Data System (ADS)

Pronenko, Vira; Dudkin, Fedir

2016-12-01

The profession of a miner is one of the most dangerous in the world. Among the main causes of fatalities in underground coal mines are the delayed alert of the accident and the lack of information regarding the actual location of the miners after the accident. In an emergency situation (failure or destruction of underground infrastructure), personnel search behind and beneath blockage needs to be performed urgently. However, none of the standard technologies - radio-frequency identification (RFID), Digital Enhanced Cordless Telecommunications (DECT), Wi-Fi, emitting cables, which use the stationary technical devices in mines - provide information about the miners location with the necessary precision. The only technology that is able to provide guaranteed delivery of messages to mine personnel, regardless of their location and under any destruction in the mine, is low-frequency radio technology, which is able to operate through the thickness of rocks even if they are wet. The proposed new system for miner localization is based on solving the inverse problem of determining the magnetic field source coordinates using the data of magnetic field measurements. This approach is based on the measurement of the magnetic field radiated by the miner's responder beacon using two fixed and spaced three-component magnetic field receivers and the inverse problem solution. As a result, a working model of the system for miner's beacon search and localization (MILES - MIner's Location Emergency System) was developed and successfully tested. This paper presents the most important aspects of this development and the results of experimental tests.

GDF5 PROGENITORS GIVE RISE TO FIBROCARTILAGE CELLS THAT MINERALIZE VIA HEDGEHOG SIGNALING TO FORM THE ZONAL ENTHESIS

PubMed Central

Dyment, Nathaniel A.; Breidenbach, Andrew P.; Schwartz, Andrea G.; Russell, Ryan P.; Aschbacher-Smith, Lindsey; Liu, Han; Hagiwara, Yusuke; Jiang, Rulang; Thomopoulos, Stavros; Butler, David L.; Rowe, David W.

2015-01-01

The sequence of events that leads to the formation of a functionally graded enthesis is not clearly defined. The current study demonstrates that clonal expansion of Gdf5 progenitors contributes to linear growth of the enthesis. Prior to mineralization, Col1+ cells in the enthesis appose Col2+ cells of the underlying primary cartilage. At the onset of enthesis mineralization, cells at the base of the enthesis express alkaline phosphatase, Indian hedgehog, and ColX as they mineralize. The mineralization front then extends towards the tendon midsubstance as cells above the front become encapsulated in mineralized fibrocartilage over time. The hedgehog (Hh) pathway regulates this process, as Hh-responsive Gli1+ cells within the developing enthesis mature from unmineralized to mineralized fibrochondrocytes in response to activated signaling. Hh signaling is required for mineralization, as tissue-specific deletion of its obligate transducer Smoothened in the developing tendon and enthesis cells leads to significant reductions in the apposition of mineralized fibrocartilage. Together, these findings provide a spatiotemporal map of events – from expansion of the embryonic progenitor pool to synthesis of the collagen template and finally mineralization of this template – that leads to the formation of the mature zonal enthesis. These results can inform future tendon-to-bone repair strategies to create a mechanically functional enthesis in which tendon collagen fibers are anchored to bone through mineralized fibrocartilage. PMID:26141957

Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits: with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia: Chapter J in Global mineral resource assessment

USGS Publications Warehouse

Taylor, Cliff D.; Causey, J. Douglas; Denning, Paul; Hammarstrom, Jane M.; Hayes, Timothy S.; Horton, John D.; Kirschbaum, Michael J.; Parks, Heather L.; Wilson, Anna B.; Wintzer, Niki E.; Zientek, Michael L.

2013-01-01

Chapter 1 of this report summarizes a descriptive model of sediment-hosted stratabound copper deposits. General characteristics and subtypes of sediment-hosted stratabound copper deposits are described based upon worldwide examples. Chapter 2 provides a global database of 170 sediment-hosted copper deposits, along with a statistical evaluation of grade and tonnage data for stratabound deposits, a comparison of stratabound deposits in the CACB with those found elsewhere, a discussion of the distinctive characteristics of the subtypes of sediment-hosted copper deposits that occur within the CACB, and guidelines for using grade and tonnage distributions for assessment of undiscovered resources in sediment-hosted stratabound deposits in the CACB. Chapter 3 presents a new descriptive model of sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits with descriptions of individual deposits of this type in the CACB and elsewhere. Appendix A describes a relational database of tonnage, grade, and other information for more than 100 sediment-hosted copper deposits in the CACB. These data are used to calculate the pre-mining mineral endowment for individual deposits in the CACB and serve as the basis for the grade and tonnage models presented in chapter 2. Appendix B describes three spatial databases (Esri shapefiles) for (1) point locations of more than 500 sediment-hosted copper deposits and prospects, (2) projected surface extent of 86 selected copper ore bodies, and (3) areal extent of 77 open pits, all within the CACB.

Advanced and amplified BOLD fluctuations in high-grade gliomas.

PubMed

Gupta, Lalit; Gupta, Rakesh K; Postma, Alida A; Sahoo, Prativa; Gupta, Pradeep K; Patir, Rana; Ahlawat, Sunita; Saha, Indrajit; Backes, Walter H

2018-06-01

measures. Preliminary results showed that quantification of spontaneous fluctuations has potential for hemodynamic characterization of gliomas and distinguishing between high- and low-grade gliomas. 4 Technical Efficacy: Stage 5 J. Magn. Reson. Imaging 2018;47:1616-1625. © 2017 International Society for Magnetic Resonance in Medicine.

Origin of high-grade gold ore, source of ore fluid components, and genesis of the Meikle and neighboring Carlin-type deposits, Northern Carlin Trend, Nevada

USGS Publications Warehouse

Emsbo, P.; Hofstra, A.H.; Lauha, E.A.; Griffin, G.L.; Hutchinson, R.W.

2003-01-01

The Meikle mine exploits one of the world's highest grade Carlin-type gold deposits with reserves of ca. 220 t gold at an average grade of 24.7 g/t. Locally, gold grades exceed 400 g/t. Several geologic events converged at Meikle to create these spectacular gold grades. Prior to mineralization, a Devonian hydrothermal system altered the Bootstrap limestone to Fe-rich dolomite. Subsequently the rocks were brecciated by faulting and Late Jurassic intrusive activity. The resulting permeability focused flow of late Eocene Carlin-type ore fluids and allowed them to react with the Fe-rich dolomite. Fluid inclusion data and mineral assemblages indicate that these fluids were hot (ca. 220??C),of moderate salinity (400 g/t. Petrographic observations, geochemical data, and stable isotope results from the Meikle mine and other deposits at the Goldstrike mine place important constraints on genetic models for Meikle and other Carlin-type gold deposits on the northern Carlin trend. The ore fluids were meteoric water (??D = -135???, ??18O = -5???) that interacted with sedimentary rocks at a water/rock ratio of ca. 1 and temperatures of ca. 220??C. The absence of significant silicification suggests that there was little cooling of the ore fluids during mineralization. These two observations strongly suggest that ore fluids were not derived from deep sources but instead flowed parallel to isotherms. The gold was transported by H2S (??34S = 9???), which was derived from Paleozoic sedimentary rocks. The presence of auriferous sedimentary exhalative mineralization in the local stratigraphic sequence raises the possibility that preexisting concentrations of gold contributed to the Carlin-type deposits. Taken together our observations suggest that meteoric water evolved to become an ore fluid by shallow circulation through previously gold- and sulfur-enriched rocks. Carlin-type gold deposits formed where these fluids encountered permeable, reactive Fe-rich rocks.

7 CFR 810.105 - Grades and grade requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN General Provisions Grades, Grade Requirements, and Grade Designations § 810.105 Grades and grade...

Models of grades and tonnages of some lode tin deposits

USGS Publications Warehouse

Menzie, W.D.; Reed, B.L.; Singer, Donald A.

1988-01-01

Descriptive and grade/tonnage models have recently been built for many types of deposits. Such models consist of descriptions of mineralogy, host rocks, ore textures, controls, alteration, geochemical signatures, age, and tectonic settings, together with statistical models of grades, tonnages, and contained metal of deposits of each type. The models are used to identify areas that may contain undiscovered deposits of given types, to convey to non-geologists an idea of the importance of such deposits, and to test and refine classifications of mineral deposits.Descriptive and grade/tonnage models have recently been built for five types of primary tin deposits: rhyolite-hosted such as in Mexico; hydrothermal lodes such as in Cornwall, England, and the Herberton district, Queensland; replacement (or exhalative?) such as Renison Bell, Tasmania; skarn such as at Lost River, Alaska; and greisen such as in the Erzgebirge. Analyses of frequency distributions of tonnage, contained metal, tin grades and the relationships between these variables show that the deposits fall into four well-defined domains that have definite geological characteristics. Rhyolite-hosted, or Mexican, deposits contain a median of 4 t of tin and have a median grade of 0.4% Sn. Hydrothermal lode deposits have the highest grades. Half of such deposits have grades over 1.0% Sn, and the majority contain more than 1,000 t Sn. Large hydrothermal vein deposits contain more than 50,000 t Sn. Replacement (or exhalative?) deposits contain the largest amount of tin (median = 40,000 t). They are only of slightly lower grade (median = 0.80% Sn) than the hydrothermal lodes. Greisen or stockwork deposits have larger tonnages than replacement deposits, but contain less tin (median = 25,000 t).They are also of much lower grade (median = 0.3% Sn). Though grades and tonnages are available for only four skarn deposits, they appear to be more like greisen deposits than replacement deposits when compared using grades

Earth Observation in Environmental and Societal Impacts of Mineral Resources Exploitation

NASA Astrophysics Data System (ADS)

Chevrel, Stephane

Several national and international initiatives, both from the private or the institutional sectors, arised to address the sustainable development of the extractive industry and the reduction of its environmental footprint. Meanwhile, the extractive industry is facing increasing environmental and societal pressures, being regulatory or not, during all phases of a project, from exploration to exploitation and closure. The social acceptability of a project is among the major key issues to be dealt with. The EO-MINERS project (Earth Observation for Monitoring and Observing Environmental and Societal Impacts of Mineral Resources Exploration and Exploitation) is a newly EU funded Research and Technological Development project started in February 2010. EO-MINERS scientific and technical objectives are to: i) assess policy requirements at macro (public) and micro (mining companies) levels and define environmental, socio-economic, societal and sustainable development criteria and indicators to be possibly dealt using EO (Earth Observation); ii) use existing EO knowledge and carry out new developments on demonstration sites to further demonstrate the capabilities of integrated EO-based methods and tools in monitoring, managing and contributing reducing the environmental and societal footprints of the extractive industry during all phases of a mining project, from the exploration to the exploitation and closure stages; iii) contribute making reliable and objective information about affected ecosystems, populations and societies, to serve as a basis for a sound "trialogue" between industrialists, governmental organisations and stakeholders. EO-MINERS also is designed to embed the outcomes of the project firmly in the GEO process through a review the existing GEO Tasks covering the 9 societal benefit and 5 transverse areas defined by GEO work plan 2007-2009. This analysis will be used to identify synergies and gaps between EO-MINERS and GEO, with the aim of mapping mining and

Oxygen isotope thermometry of quartz-Al2SiO5veins in high-grade metamorphic rocks on Naxos island (Greece)

NASA Astrophysics Data System (ADS)

Putlitz, Benita; Valley, John; Matthews, Alan; Katzir, Yaron

2002-04-01

Diffusion models predict that peak metamorphic temperatures are best recorded by the oxygen isotope fractionation between minerals in a bi-mineralic rock in which a refractory accessory mineral with slow oxygen diffusion rate is modally minor to a mineral with a faster diffusion rate. This premise is demonstrated for high-grade metamorphism on the island of Naxos, Greece, where quartz-kyanite oxygen isotope thermometry from veins in high-grade metamorphic pelites gives temperatures of 635-690 °C. These temperatures are in excellent agreement with independent thermometry for the regional M2 peak metamorphic conditions and show that the vein minerals isotopically equilibrated at the peak of metamorphism. Quartz-sillimanite fractionations in the same veins give similar temperatures (680+/-35 °C) and suggest that the veins grew near to the kyanite-sillimanite boundary, corresponding to pressures of 6.5 to 7.5 kbar for temperatures of 635-685 °C. By contrast, quartz-kyanite and quartz-biotite pairs in the host rocks yield lower temperature estimates than the veins (590-600 and 350-550 °C, respectively). These lower apparent temperatures are also predicted from calculations of diffusional resetting in the polyphase host-rock system. The data demonstrate that bimineralic vein assemblages can be used as accurate thermometers in high-temperature rocks whereas retrograde exchange remains a major problem in many polymineralic rocks.

Scales of equilibrium and disequilibrium during cleavage formation in chlorite and biotite-grade phyllites, SE Vermont

USGS Publications Warehouse

McWilliams, C.K.; Wintsch, R.P.; Kunk, Michael J.

2007-01-01

Detailed electron microprobe analyses of phyllosilicates in crenulated phyllites from south-eastern Vermont show that grain-scale zoning is common, and sympathetic zoning in adjacent minerals is nearly universal. We interpret this to reflect a pressure-solution mechanism for cleavage development, where precipitation from a very small fluid reservoir fractionated that fluid. Multiple analyses along single muscovite, biotite and chlorite grains (30–200 μm in length) show zoning patterns indicating Tschermakitic substitutions in muscovite and both Tschermakitic and di/trioctahedral substitutions in biotite and chlorite. Using cross-cutting relationships and mineral chemistry it is shown that these patterns persist in cleavages produced at metamorphic conditions of chlorite-grade, chlorite-grade overprinted by biotite-grade and biotite-grade. Zoning patterns are comparable in all three settings, requiring a similar cleavage-forming mechanism independent of metamorphic grade. Moreover, the use of 40Ar/39Ar geochronology demonstrates this is true regardless of age. Furthermore, samples with chlorite-grade cleavages overprinted by biotite porphyroblasts suggest the closure temperatures for the diffusion of Al, Si, Mg and Fe ions are greater than the temperature of the biotite isograd (>∼400 °C). Parallel and smoothly fanning tie lines produced by coexisting muscovite–chlorite, and muscovite–biotite pairs on compositional diagrams demonstrate effectively instantaneous chemical equilibrium and probably indicate simultaneous crystallization.These results do not support theories suggesting cleavages form in fluid-dominated systems. If crenulation cleavages formed in systems in which the chemical potentials of all major components are fixed by an external reservoir, then the compositions of individual grains defining these cleavages would be uniform. On the contrary, the fine-scale chemical zoning observed probably reflects a grain-scale process consistent with a

Improving Grading Consistency through Grade Lift Reporting

ERIC Educational Resources Information Center

Millet, Ido

2010-01-01

We define Grade Lift as the difference between average class grade and average cumulative class GPA. This metric provides an assessment of how lenient the grading was for a given course. In 2006, we started providing faculty members individualized Grade Lift reports reflecting their position relative to an anonymously plotted school-wide…

Metamorphic mineral assemblages of slightly calcic pelitic rocks in and around the Taconic Allochthon, southwestern Massachusetts and adjacent Connecticut and New York

USGS Publications Warehouse

Zen, E-an

1981-01-01

The mineral assemblages from metamorphosed slightly calcic pelitic rocks of the Taconic Range in southwestern Massachusetts and adjacent areas of Connecticut and New York were studied petrographically and chemically. These rocks vary in metamorphic grade from those below the chloritoid zone through the chloritoid and garnet zones into the kyanite-staurolite zone. Microprobe data on the ferromagnesian minerals show that the sequence of increasing Fe/ (Fe+Mg) value is, from the lowest, chlorite, biotite, hornblende, chloritoid, staurolite, garnet. Hornblende, epidote, garnet, and plagioclase are the most common minerals that carry significant calcium. Biotite is persistently deficient in alkali but is abnormally rich in octahedral aluminum to such an extent that the overall charge balance can be ascribed to an AI=K+ (Fe,Mg) diadochy. Muscovite contains small though persistent amounts of iron and magnesium in octahedral positions but has a variable K/Na ratio, which is potentially useful as a geothermometer. One low-grade muscovite is highly phengitic, but the white micas in rocks from metamorphic grades higher than chloritoid zone do not contain significant phengite components. Chlorite is persistently high in aluminum and so its ratio of divalent ions to aluminum is approximately that of garnet. Many garnets show pronounced zoning in manganese and less pronounced zoning in calcium. Garnet coexisting with hornblende contains a high proportion of the grossularitic component. The calcium content is significant in all the analyzed garnets, except those from a cummingtonite-bearing sample that is free of muscovite. This suggests that in slightly calcic pelitic rocks, calcium-free garnet cannot coexist with muscovite. Most of the mineral assemblages formed in the presence of excess quartz and muscovite. The phase-petrologic analysis, made with the aid of an eight-phase multisystematic model, shows the following major points: 1. Chloritoid and staurolite coexist in a

Third Grade Students' Performance on Calculator and Calculator-Related Tasks. Technical Report No. 498.

ERIC Educational Resources Information Center

Weaver, J. Fred

Refinements of work with calculator algorithms previously conducted by the author are reported. Work with "chaining" and the doing/undoing property in addition and subtraction was tested with 24 third-grade students. Results indicated the need for further instruction with both ideas. Students were able to manipulate the calculator keyboard, but…

43 CFR 3873.1 - Segregation of mineral from non-mineral land.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Segregation of mineral from non-mineral...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) ADVERSE CLAIMS, PROTESTS AND CONFLICTS Segregation § 3873.1 Segregation of mineral from non-mineral land. Where a survey is...

43 CFR 3873.1 - Segregation of mineral from non-mineral land.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Segregation of mineral from non-mineral...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) ADVERSE CLAIMS, PROTESTS AND CONFLICTS Segregation § 3873.1 Segregation of mineral from non-mineral land. Where a survey is...

43 CFR 3873.1 - Segregation of mineral from non-mineral land.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Segregation of mineral from non-mineral...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) ADVERSE CLAIMS, PROTESTS AND CONFLICTS Segregation § 3873.1 Segregation of mineral from non-mineral land. Where a survey is...

A study to examine the feasibility of using surface penetrators for mineral exploration

NASA Technical Reports Server (NTRS)

Davis, A. S.; Anderson, D. W.

1978-01-01

The feasibility of using penetrators in earth applications is examined. Penetrator applications in exploration for mineral resources only is summarized. Instrumentation for future penetrators is described. Portions of this report are incorporated into a more extensive report examining other penetrator applications in exploration for fossil fuels, geothermal resources, and in environmental and engineering problems, which is to be published as a NASA technical publication.

Gdf5 progenitors give rise to fibrocartilage cells that mineralize via hedgehog signaling to form the zonal enthesis.

PubMed

Dyment, Nathaniel A; Breidenbach, Andrew P; Schwartz, Andrea G; Russell, Ryan P; Aschbacher-Smith, Lindsey; Liu, Han; Hagiwara, Yusuke; Jiang, Rulang; Thomopoulos, Stavros; Butler, David L; Rowe, David W

2015-09-01

The sequence of events that leads to the formation of a functionally graded enthesis is not clearly defined. The current study demonstrates that clonal expansion of Gdf5 progenitors contributes to linear growth of the enthesis. Prior to mineralization, Col1+ cells in the enthesis appose Col2+ cells of the underlying primary cartilage. At the onset of enthesis mineralization, cells at the base of the enthesis express alkaline phosphatase, Indian hedgehog, and ColX as they mineralize. The mineralization front then extends towards the tendon midsubstance as cells above the front become encapsulated in mineralized fibrocartilage over time. The hedgehog (Hh) pathway regulates this process, as Hh-responsive Gli1+ cells within the developing enthesis mature from unmineralized to mineralized fibrochondrocytes in response to activated signaling. Hh signaling is required for mineralization, as tissue-specific deletion of its obligate transducer Smoothened in the developing tendon and enthesis cells leads to significant reductions in the apposition of mineralized fibrocartilage. Together, these findings provide a spatiotemporal map of events - from expansion of the embryonic progenitor pool to synthesis of the collagen template and finally mineralization of this template - that leads to the formation of the mature zonal enthesis. These results can inform future tendon-to-bone repair strategies to create a mechanically functional enthesis in which tendon collagen fibers are anchored to bone through mineralized fibrocartilage. Copyright © 2015 Elsevier Inc. All rights reserved.

Internal Consistency of General Outcome Measures in Grades 1-8. Technical Report # 0915

ERIC Educational Resources Information Center

Anderson, Daniel; Tindal, Gerald; Alonzo, Julie

2009-01-01

We developed alternate forms of a math test for use in both screening students at risk of failure and monitoring their progress over time. In this technical report, we present results of the screener, used in the fall of 2009. The 48-item test was aligned to the National Council of Teachers of Mathematics (NCTM) Curriculum Focal Point Standards…

Spectral data analysis of rock and mineral in Hatu Western Junggar Region, Xinjiang

NASA Astrophysics Data System (ADS)

Wang, Shanshan; Zhou, Kefa; Zhang, Nannan; Wang, Jinlin

2014-11-01

Mineral resources are important material basis for the survival and development of human society. The development of hyperspectral remote sensing technology, which has made direct identification of minerals or mineral aggregates become possible, paves a new way for the application of remote sensing geology. The West Junggar region is located Xinjiang west verge of Junggar, with ore-forming geological conditions be richly endowed by nature and huge prospecting potentiality. The area has very good outcrop exposure with almost no vegetation cover, which is a natural test new method of remote sensing geological exploration. The characteristic of rock and mineral spectrum is not only the physical base of geological remote sensing technical application but also the base of the quantificational analysis of geological remote sensing, and the study of reflectance spectrum is the main content in the basic research of remote sensing. In this study, we collected the outdoor and indoor reflectance spectrum of rocks and minerals by using a spectroradiometer (ASD FieldSpec FR, ASD, USA), which band extent varied from 350 to 2,500 nm. Basin on a great deal of spectral data for different kinds of rocks and minerals, we have analyzed the spectrum characteristics and change of seven typical mineral rocks. According to the actual conditions, we analyzed the data noise characteristic of the spectrum and got rid of the noise. Meanwhile, continuum removed technology was used to remove the environmental background influence. Finally, in order to take full advantage of multi-spectrum data, ground information is absolutely necessary, and it is important to build a representative spectral library. We build the spectral library of rocks and minerals in Hatu, which can be used for features investigation, mineral classification, mineral mapping and geological prospecting in Hatu Western Junggar region by remote sensing. The result of this research will be significant to the research of

Analysis of Reading Fluency and Comprehension Measures for Sixth Grade Students. Technical Report #24

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2004-01-01

The No Child Left Behind Act of 2001 has increased the importance of assessment in K-12 education. Designed to ensure that all students meet high academic standards, the law currently requires states receiving Title I funds to test all children annually in reading and math in grades 3 through 8 and report student performance disaggregated by…

Exercise intensities during a ballet lesson in female adolescents with different technical ability.

PubMed

Guidetti, L; Gallotta, M C; Emerenziani, G P; Baldari, C

2007-09-01

To investigate the exercise intensity during a typical grade five ballet lesson, thirty-nine dancers (13 - 16 yrs) were divided into three different technical proficiency groups: low level (n = 13), intermediate level (n = 14), and high level (n = 12). A progressively incremented treadmill test was administered to determine VO(2max), individual ventilatory threshold (IVT), and the individual anaerobic threshold (IAT). Oxygen uptake (VO(2)), heart rate (HR) and blood lactate (La) were then evaluated during a grade five ballet lesson. Oxygen uptake at IVT, IAT and maximal oxygen uptake were greater (p < 0.05) in the high-level dancers indicating a higher level of fitness. HR and %VO(2max) obtained during the various exercises of the ballet lesson were similar among groups. During the ballet lesson, low technical level dancers had more V.O (2) and La values above (p < 0.05) the IAT than the other groups. Correlation analysis revealed that the number of exercises performed above IAT was positively related to anthropometric characteristics (BMI, %FM; r = 0.36, p < 0.05; r = 0.46, p < 0.01), negatively related to fitness parameters (VO(2IVT), VO(2IAT), VO(2max); r between - 0.43 and - 0.69; p < 0.001) and to technical level (r = - 0.70; p < 0.001). The subjects classified as having low technical abilities had lower fitness levels and performed more exercises above IAT than the more skilled dancers.

Functionally graded scaffolds for the engineering of interface tissues using hybrid twin screw extrusion/electrospinning technology

NASA Astrophysics Data System (ADS)

Erisken, Cevat

Tissue engineering is the application of the principles of engineering and life sciences for the development of biological alternatives for improvement or regeneration of native tissues. Native tissues are complex structures with functions and properties changing spatially and temporally, and engineering of such structures requires functionally graded scaffolds with composition and properties changing systematically along various directions. Utilization of a new hybrid technology integrating the controlled feeding, compounding, dispersion, deaeration, and pressurization capabilities of extrusion process with electrospinning allows incorporation of liquids and solid particles/nanoparticles into polymeric fibers/nanofibers for fabrication of functionally graded non-woven meshes to be used as scaffolds in engineering of tissues. The capabilities of the hybrid technology were demonstrated with a series of scaffold fabrication and cell culturing studies along with characterization of biomechanical properties. In the first study, the hybrid technology was employed to generate concentration gradations of beta-tricalcium phosphate (beta-TCP) nanoparticles in a polycaprolactone (PCL) binder, between two surfaces of nanofibrous scaffolds. These scaffolds were seeded with pre-osteoblastic cell line (MC3T3-E1) to attempt to engineer cartilage-bone interface, and after four weeks, the tissue constructs revealed formation of continuous gradations in extracellular matrix akin to cartilage-bone interface in terms of distributions of mineral concentrations and biomechanical properties. In a second demonstration of the hybrid technology, graded differentiation of stem cells was attempted by using insulin, a known stimulator of chondrogenic differentiation, and beta-glycerol phosphate (beta-GP), for mineralization. Concentrations of insulin and beta-GP in PCL were controlled to monotonically increase and decrease, respectively, along the length of scaffolds, which were then seeded

7 CFR 810.304 - Grades and grade requirements for canola.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for canola. 810.304 Section 810.304 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... Grade Requirements § 810.304 Grades and grade requirements for canola. Grading factors Grades, U.S. Nos...

7 CFR 810.304 - Grades and grade requirements for canola.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Grades and grade requirements for canola. 810.304 Section 810.304 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... Grade Requirements § 810.304 Grades and grade requirements for canola. Grading factors Grades, U.S. Nos...

Control of the Physical and Technical Properties of Water in Technological Processes

NASA Astrophysics Data System (ADS)

Klopotov, V. D.; Gorlenko, N. P.; Sarkisov, Yu S.; Kulchenko, A. K.; Klopotov, A. A.

2016-08-01

The physical and technical properties of water activated by the electrochemical treatment in a two-chamber electrolizer are investigated. The regularities of changes inthe values of acidity, redox potential, ionic composition, concentration of oxygen, structural organization of catholyte and anolyte are revealed. The possibility of controlling the properties of the liquid for more efficient extraction of polymetallic minerals by flotation is described.

A Replication of the Technical Adequacy of the Student Subjective Wellbeing Questionnaire

ERIC Educational Resources Information Center

Renshaw, Tyler L.

2015-01-01

The present study reports on a replication of the technical adequacy of the Student Subjective Wellbeing Questionnaire (SSWQ), which is a 16-item self-report instrument for assessing youth's academic efficacy, educational purpose, joy of learning, and school connectedness, with a sample of adolescents in Grades 6 to 7 (N = 438). Findings confirmed…

Evaluating the Effectiveness of the Utah Career and Technical Education Introduction Course

ERIC Educational Resources Information Center

Spielmaker, Debra Marie

2013-01-01

This quantitative study evaluated the gains and evaluation outcomes of the compulsory Career and Technical Education (CTE) Introduction course. All Utah public school seventh-grade students are required to enroll in this school-year course. The matched-pair design used preexisting data to analyze 6,078 pre-and postsurvey responses collected at the…

Mineralization/Anti-Mineralization Networks in the Skin and Vascular Connective Tissues

PubMed Central

Li, Qiaoli; Uitto, Jouni

2014-01-01

Ectopic mineralization has been linked to several common clinical conditions with considerable morbidity and mortality. The mineralization processes, both metastatic and dystrophic, affect the skin and vascular connective tissues. There are several contributing metabolic and environmental factors that make uncovering of the precise pathomechanisms of these acquired disorders exceedingly difficult. Several relatively rare heritable disorders share phenotypic manifestations similar to those in common conditions, and, consequently, they serve as genetically controlled model systems to study the details of the mineralization process in peripheral tissues. This overview will highlight diseases with mineral deposition in the skin and vascular connective tissues, as exemplified by familial tumoral calcinosis, pseudoxanthoma elasticum, generalized arterial calcification of infancy, and arterial calcification due to CD73 deficiency. These diseases, and their corresponding mouse models, provide insight into the pathomechanisms of soft tissue mineralization and point to the existence of intricate mineralization/anti-mineralization networks in these tissues. This information is critical for understanding the pathomechanistic details of different mineralization disorders, and it has provided the perspective to develop pharmacological approaches to counteract the consequences of ectopic mineralization. PMID:23665350

Grading Rigor in Counselor Education: A Specifications Grading Framework

ERIC Educational Resources Information Center

Bonner, Matthew W.

2016-01-01

According to accreditation and professional bodies, evaluation and grading are a high priority in counselor education. Specifications grading, an evaluative tool, can be used to increase grading rigor. This article describes the components of specifications grading and applies the framework of specifications grading to a counseling theories course.

7 CFR 51.1575 - U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large. 51.1575 Section 51.1575 Agriculture Regulations of the Department of... Potatoes Grades § 51.1575 U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade...

7 CFR 51.1576 - U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large. 51.1576 Section 51.1576 Agriculture Regulations of the Department of... Potatoes Grades § 51.1576 U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade...

7 CFR 51.1575 - U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large. 51.1575 Section 51.1575 Agriculture Regulations of the Department of... Potatoes Grades § 51.1575 U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade...

7 CFR 51.1576 - U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large. 51.1576 Section 51.1576 Agriculture Regulations of the Department of... Potatoes Grades § 51.1576 U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade...

7 CFR 51.1575 - U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large. 51.1575 Section 51.1575 Agriculture Regulations of the Department of... Potatoes Grades § 51.1575 U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade...

7 CFR 51.1576 - U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large. 51.1576 Section 51.1576 Agriculture Regulations of the Department of... Potatoes Grades § 51.1576 U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade...

Secondary Principals' Perceptions of Grading and Grade Reporting Practices

ERIC Educational Resources Information Center

Akins, Jeremie

2016-01-01

Effective grading practices in the classroom as well as reporting practices such as standards-based grading (SBG) is one way to report learning (Marzano, 2010). The focus of this particular study was to address alternative ways to tackle the issue of grading and grade reporting in comparison to the traditional grading methods. Specifically, this…

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Synthesized Li4Ti5O12 from Technical Grade Raw Material by Excess LiOH.H2O as Anode Lithium Ion Battery

NASA Astrophysics Data System (ADS)

Priyono, S.; Primasari, R. D.; Saptari, S. A.; Prihandoko, B.

2017-07-01

Li4Ti5O12 powder as anode lithium ion battery was synthesized via solid state reaction with excess LiOH.H2O. Technical grades raw materials like LiOH.H2O and TiO2 were used as starting materials. LiOH.H2O excess was varied from 0; 2.5; 5 and 7.5% to get higher optimum phases and capacity of Li4Ti5O12. All raw materials were mixed stoichiometry then followed by calcination and sintering process to get final products. The obtained products were characterized by XRD, SEM, and PSA to get properties of active materials and the electrochemical properties were done by cyclic voltametry and charge-discharge test. The XRD test showed that 5% excess have highest Li4Ti5O12 phases. All samples have same in morphology, agglomerate and same in particle size distribution. Sample with 5% excess showed good reversible process and chargedischarge test showed that increasing Li4Ti5O12 phase can improve specific capacity.

Pre-sarcopenia and bone mineral density in adults submitted to hematopoietic stem cell transplantation.

PubMed

Pereira, Cristiane Pavan; Amaral, Denise Johnsson Campos; Funke, Vaneuza Araujo Moreira; Borba, Victória Zeghbi Cochenski

The aim of this study was to evaluate the prevalence of pre-sarcopenia and bone mineral density after hematopoietic stem cell transplantation. The study group consisted of over 18-year-old patients who had been submitted to allogeneic transplantation at least one year previously. Patients and healthy controls were matched by sex, ethnic background, age, and body mass index. Body composition and bone mineral density were measured by dual-energy X-ray absorptiometry. A 24-h food recall and food frequency survey were performed. The biochemical evaluation included calcium, parathormone and vitamin D. Eighty-seven patients (52 men; age: 37.2±12.7 years; body mass index: 25±4.5kg/m 2 ) were compared to 68 controls [31 men; age 35.4±15.5 years (p=0.467); body mass index 25.05±3.7kg/m 2 (p=0.927)]. There was no significant difference in the dietary intake between patients and controls. The mean levels of vitamin D were 23.5±10.3ng/mL; 29 patients (41.0%) had insufficient and 26 (37.14%) deficient levels. A higher prevalence of reduced bone mineral density was observed in 24 patients (25%) compared to 12 controls (19.1% - p<0.001). Pre-sarcopenia was diagnosed in 14 (14.4%) patients and none of the controls (p=0.05). There was a higher prevalence of pre-sarcopenia (66%) in patients with grades III and IV compared to those with grades 0-II graft-versus-host disease (10.9%) (p=0.004). patients submitted to transplantation had a higher prevalence of pre-sarcopenia and greater changes in bone mineral density compared to controls; the severity of graft-versus-host disease had an impact on the prevalence of pre-sarcopenia. Copyright © 2017 Associação Brasileira de Hematologia, Hemoterapia e Terapia Celular. Published by Elsevier Editora Ltda. All rights reserved.

CBM Maze-Scores as Indicators of Reading Level and Growth for Seventh-Grade Students

ERIC Educational Resources Information Center

Chung, Siuman; Espin, Christine A.; Stevenson, Claire E.

2018-01-01

The technical adequacy of CBM maze-scores as indicators of reading level and growth for seventh-grade secondary-school students was examined. Participants were 452 Dutch students who completed weekly maze measures over a period of 23 weeks. Criterion measures were school level, dyslexia status, scores and growth on a standardized reading test.…

43 CFR 3873.1 - Segregation of mineral from non-mineral land.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Segregation of mineral from non-mineral... AND CONFLICTS Segregation § 3873.1 Segregation of mineral from non-mineral land. Where a survey is... satisfactorily established that there are existent prior unpatented mining claims, the segregation of the latter...

U.S. Geological Survey Mineral Resources Program—Mineral resource science supporting informed decisionmaking

USGS Publications Warehouse

Wilkins, Aleeza M.; Doebrich, Jeff L.

2016-09-19

The USGS Mineral Resources Program (MRP) delivers unbiased science and information to increase understanding of mineral resource potential, production, and consumption, and how mineral resources interact with the environment. The MRP is the Federal Government’s sole source for this mineral resource science and information. Program goals are to (1) increase understanding of mineral resource formation, (2) provide mineral resource inventories and assessments, (3) broaden knowledge of the effects of mineral resources on the environment and society, and (4) provide analysis on the availability and reliability of mineral supplies.

Factors Related to Predicting Grade Point Averages of Dislocated Workers at a Rural Community College

ERIC Educational Resources Information Center

Gregory, James Brent

2010-01-01

The purpose of the study was to examine relationships which existed between selected demographics and college grade point averages "GPAs" for dislocated workers and non dislocated workers enrolled in career-technical courses at a rural community college. The variables included in the study are age, gender, and marital status. The study…

Mineral resource potential of the Middle Santiam Roadless Area, Linn County, Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, G.W.

1984-01-01

This report discusses the results of a mineral survey of the Middle Santiam Roadless Area (06929), Willamette National Forest, Linn County Oregon. Middle Santiam Roadless Area is adjacent on the east of the Quartzville mining district, a district that has yielded small amounts of base- and precious-metal ores. Many rock types and alteration features that characterize the mining district occur only the western part of the roadless area, and analysis of a few samples from this part of the roadless area indicates evidence of weak mineralization. The western part of the roadless area is therefore identified as having a moderatemore » potential for small deposits of base and precious metals and a low potential for large very low-grade precious-metal deposits. The eastern part of the roadless area has a low potential for metalliferous deposits. 7 refs., 4 figs., 1 tab.« less

Exploring caves: teaching packet for grades K-3

USGS Publications Warehouse

,

1998-01-01

"Exploring Caves" is an interdisciplinary set of materials on caves for grades K-3. Caves entail at least five scientific disciplines: earth science, hydrology, mapping, biology, and anthropology. Each of these disciplines involves a unique content area as well as the development of particular intellectual skills. This unit aims at helping teachers to sort and organize the most important ideas in this rich scientific area. Detailed lesson plans serve as ways to pass these ideas on to very young students. Most American caves are big holes that form in limestone rock. The holes begin as cracks in limestone. The cracks get bigger and bigger. They grow into underground streams, rivers, and even lakes. When water drains away, the waterways turn into open cave tunnels, passages, and caverns. It takes 10,000 to 100,000 years to form a cave big enough for people to move around inside. Water drips constantly in caves. The drips dissolve limestone minerals in one part of the cave. As water dries out, the minerals build up in other places. In this way, beautiful cave rock formations and crystals grow over thousands of years. These rock formations change dark limestone caves into hidden fantasy lands.

On groupoid gradings

NASA Astrophysics Data System (ADS)

Calderón Martín, Antonio Jesús; Martín González, Cándido; Ndoye, Daouda

2018-01-01

We introduce the notion of groupoid grading, give some nontrivial examples and prove that groupoid gradings on simple commutative or anti-commutative algebras are necessarily group gradings. We also take advantage of the structure of groupoids to prove some results about groupoid gradings and certain coarsenings of these which turn out to be group gradings. We also study set gradings on arbitrary algebras, by characterizing their homogeneous semisimplicity and their homogeneous simplicity in terms of a property satisfied by the supports of the gradings, and also relate set gradings with groupoid gradings via coarsenings. Finally we study a class of set gradings on Mn(C) , the orthogonal gradings, and show that all of them which are fine are necessarily groupoid gradings.

Assessment of Design Tools and Criteria for Urban Rail Track Structures : Volume 2. At-Grade Slab Track.

DOT National Transportation Integrated Search

1974-04-01

This report presents the results of a critical review of the technical factors which govern the design and performance of at-grade slab track for urban rail systems. The assessment of current design practices is based on a review of the literature an...

Clay Minerals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Karl T.; Sanders, Rebecca L.; Washton, Nancy M.

2014-03-14

Clay minerals are important components of the environment and are involved or implicated in processes such as the uptake of pollutants and the release of nutrients and as potential platforms for a number of chemical reactions. Owing to their small particle sizes (typically, on the order of microns or smaller) and mixing with a variety of other minerals and soil components, advanced characterization methods are needed to study their structures, dynamics, and reactivities. In this article, we describe the use of solid-state NMR methods to characterize the structures and chemistries of clay minerals. Early one-pulse magic-angle spinning (MAS) NMR studiesmore » of 27Al and 29Si have now been enhanced and extended with new studies utilizing advanced methodologies (such as Multiple Quantum MAS) as well as studies of less-sensitive nuclei. In additional work, the issue of reactivity of clay minerals has been addressed, including studies of reactive surface area in the environment. Utilizations of NMR-sensitive nuclides within the clay minerals themselves, and in molecules that react with specific sites on the clay mineral surfaces, have aided in understanding the reactivity of these complex aluminosilicate systems.« less

The usage, occurrence and dietary intakes of white mineral oils and waxes in Europe.

PubMed

Tennant, D R

2004-03-01

Dietary exposures to mineral hydrocarbons were estimated from information about patterns of usage, concentrations in foods and quantities of foods consumed. An industry survey showed that the largest usage of food-grade white mineral oils was in plastics manufacture although the majority are used in non-food applications. The largest volumes of wax usage were in packaging. Conservative estimates indicated that daily intakes of white mineral oils ranged from 0.39 to 0.91 mg/kg bw/day for adults and from 0.75 to 1.77 mg/kg bw/day for children (mean and 97.5th percentiles). Total wax intakes ranged from 0.08 to 0.19 mg/kg bw/day for adults and 0.23 to 0.64 mg/kg bw/day for pre-school children. When usage factors were applied, estimates of chronic intakes of white oils were reduced to 0.09-0.20 mg/kg bw/day for adults and to 0.17-0.39 mg/kg bw/day for children. Total wax intakes were reduced to 0.01-0.02 mg/kg bw/day for adults and to 0.02-0.06 mg/kg bw/day for children. For white mineral oils the principal source of exposure for most consumers was imported de-dusted grain. The principal source of potential wax exposure was from glazing agents on confectionery. There was no evidence of intakes exceeding SCF ADIs for microcrystalline waxes or certain white mineral oils and levels of exposure were similar to those of naturally-occurring mineral hydrocarbons in foods.

Sodium-bicarbonated mineral water decreases aldosterone levels without affecting urinary excretion of bone minerals.

PubMed

Schoppen, Stefanie; Pérez-Granados, Ana M; Carbajal, Angeles; Sarriá, Beatriz; Navas-Carretero, Santiago; Pilar Vaquero, M

2008-06-01

AIM To assess in healthy postmenopausal women the influence of consuming sodium-bicarbonated mineral water on postprandial evolution of serum aldosterone and urinary electrolyte excretion. Eighteen postmenopausal women consumed 500 ml of two sodium-bicarbonated mineral waters (sodium-bicarbonated mineral water 1 and sodium-bicarbonated mineral water 2) and a low-mineral water with a standard meal. Postprandial blood samples were taken at 60, 120, 240, 360 and 420 min and aldosterone concentrations were measured. Postprandial urinary minerals were determined. Urinary and total mineral excretion and urinary mineral concentrations did not differ except for sodium concentration, which was significantly higher with sodium-bicarbonated mineral water 1 than with low-mineral water (P = 0.005). There was a time effect (P = 0.003) on the aldosterone concentration. At 120 min, aldosterone concentrations were lower with sodium-bicarbonated mineral water 1 (P = 0.021) and sodium-bicarbonated mineral water 2 (P = 0.030) compared with low-mineral water. Drinking a sodium-rich bicarbonated mineral water with a meal increases urinary sodium concentration excretion without changes in the excretion of potassium and bone minerals.

Iron Sulfide Minerals Record Microbe-Mineral Interactions in Anoxic Environments

NASA Astrophysics Data System (ADS)

Picard, A.; Gartman, A.; Cosmidis, J.; Clarke, D. R.; Girguis, P. R.

2017-12-01

The precipitation of most minerals in low-temperature environments on Earth is directly or indirectly influenced by the presence of organic substances and/or microbial biomass. Notably, the influence of microorganisms on the formation of Mn and Fe oxides/oxyhydroxides at the surface of the Earth has been well characterized (Chan et al., 2011; Estes et al., 2017). However, an oxygenated atmosphere is a unique feature of planet Earth. It is therefore critical for the search of life on other planetary bodies to characterize microbe-mineral interactions that form in anoxic conditions. Here we explore the role of microorganisms on the formation of iron sulfide minerals, which form under anoxic conditions. On modern Earth, sulfate-reducing microorganisms (SRM) are the major source of dissolved sulfide in low-temperature sedimentary environments. We experimentally demonstrate that SRM play a role in the nucleation and growth of iron sulfide minerals by acting as organic templates. The physical characteristics of the resulting minerals are different from those formed under abiotic conditions. Moreover, upon forming, iron sulfide minerals become associated with organic carbon, producing a potential organo-mineral signature. We also evaluate how the presence of various organic substances affect the formation of abiotic minerals and how this could produce false biosignatures that could be mistaken as biogenic minerals. Chan, C.S., Fakra, S.C., Emerson, D., Fleming, E.J. and Edwards, K.J. (2011) Lithotrophic iron-oxidizing bacteria produce organic stalks to control mineral growth: implications for biosignature formation. Isme Journal 5, 717-727. Estes, E.R., Andeer, P.F., Nordlund, D., Wankel, S.D. and Hansel, C.M. (2017) Biogenic manganese oxides as reservoirs of organic carbon and proteins in terrestrial and marine environments. Geobiology 15, 158-172.

Effectiveness of Acoustic and Conceptual Retrieval Cues in Memory for Words at Two Grade Levels. Technical Report No. 220.

ERIC Educational Resources Information Center

Ghatala, Elizabeth S.; Hurlbut, Nancy L.

The effectiveness of two types of retrieval cues was assessed with second- and sixth-grade children. After a single presentation of a list of words, the children first recalled as many of the words as they could. Following free recall, children in each grade were given either conceptual (category names for words on the input lists) or acoustic…

Physical Properties of Normal Grade Biodiesel and Winter Grade Biodiesel

PubMed Central

Sadrolhosseini, Amir Reza; Moksin, Mohd Maarof; Nang, Harrison Lau Lik; Norozi, Monir; Yunus, W. Mahmood Mat; Zakaria, Azmi

2011-01-01

In this study, optical and thermal properties of normal grade and winter grade palm oil biodiesel were investigated. Surface Plasmon Resonance and Photopyroelectric technique were used to evaluate the samples. The dispersion curve and thermal diffusivity were obtained. Consequently, the variation of refractive index, as a function of wavelength in normal grade biodiesel is faster than winter grade palm oil biodiesel, and the thermal diffusivity of winter grade biodiesel is higher than the thermal diffusivity of normal grade biodiesel. This is attributed to the higher palmitic acid C16:0 content in normal grade than in winter grade palm oil biodiesel. PMID:21731429

Estimating mineral requirements of Nellore beef bulls fed with or without inorganic mineral supplementation and the influence on mineral balance.

PubMed

Zanetti, D; Godoi, L A; Estrada, M M; Engle, T E; Silva, B C; Alhadas, H M; Chizzotti, M L; Prados, L F; Rennó, L N; Valadares Filho, S C

2017-04-01

The objectives of this study were to quantify the mineral balance of Nellore cattle fed with and without Ca, P, and micromineral (MM) supplementation and to estimate the net and dietary mineral requirement for cattle. Nellore cattle ( = 51; 270.4 ± 36.6 kg initial BW and 8 mo age) were assigned to 1 of 3 groups: reference ( = 5), maintenance ( = 4), and performance ( = 42). The reference group was slaughtered prior to the experiment to estimate initial body composition. The maintenance group was used to collect values of animals at low gain and reduced mineral intake. The performance group was assigned to 1 of 6 treatments: sugarcane as the roughage source with a concentrate supplement composed of soybean meal and soybean hulls with and without Ca, P, and MM supplementation; sugarcane as the roughage source with a concentrate supplement composed of soybean meal and ground corn with and without Ca, P, and MM supplementation; and corn silage as the roughage source with a concentrate supplement composed of soybean meal and ground corn with and without Ca, P, and MM supplementation. Orthogonal contrasts were adopted to compare mineral intake, fecal and urinary excretion, and apparent retention among treatments. Maintenance requirements and true retention coefficients were generated with the aid of linear regression between mineral intake and mineral retention. Mineral composition of the body and gain requirements was assessed using nonlinear regression between body mineral content and mineral intake. Mineral intake and fecal and urinary excretion were measured. Intakes of Ca, P, S, Cu, Zn, Mn, Co, and Fe were reduced in the absence of Ca, P, and MM supplementation ( < 0.05). Fecal excretion of Ca, Cu, Zn, Mn, and Co was also reduced in treatments without supplementation ( < 0.01). Overall, excretion and apparent absorption and retention coefficients were reduced when minerals were not supplied ( < 0.05). The use of the true retention coefficient instead of the true

Validation of sterilizing grade filtration.

PubMed

Jornitz, M W; Meltzer, T H

2003-01-01

Validation consideration of sterilizing grade filters, namely 0.2 micron, changed when FDA voiced concerns about the validity of Bacterial Challenge tests performed in the past. Such validation exercises are nowadays considered to be filter qualification. Filter validation requires more thorough analysis, especially Bacterial Challenge testing with the actual drug product under process conditions. To do so, viability testing is a necessity to determine the Bacterial Challenge test methodology. Additionally to these two compulsory tests, other evaluations like extractable, adsorption and chemical compatibility tests should be considered. PDA Technical Report # 26, Sterilizing Filtration of Liquids, describes all parameters and aspects required for the comprehensive validation of filters. The report is a most helpful tool for validation of liquid filters used in the biopharmaceutical industry. It sets the cornerstones of validation requirements and other filtration considerations.

Transmutation effects on long-term Cs retention in phyllosilicate minerals from first principles.

PubMed

Sassi, Michel; Okumura, Masahiko; Machida, Masahiko; Rosso, Kevin M

2017-10-11

The accidental release and incorporation of radiocesium into soil minerals represents a massive environmental, technical and social challenge. Accurately forecasting the evolving distribution and fate of long- and medium-lived isotopes such as 137 Cs and 134 Cs over decadal time scales is essential. The cesium cation has long been modeled as a strongly and selectively sorbed species into clay mineral interlayers; however, because of the time scales involved by the radioisotopes half-lives, the effects of radioactive decay on Cs retention have been unknown. We report density functional theory (DFT) simulations of transmutation effects of radiocesium on long-term Cs retention in phlogopite. The calculations show that the progressive appearance of daughter product Ba 2+ is accompanied by a proportional increase in thermodynamic driving force to preferentially discharge remaining Cs, both radioactive and stable, back into aqueous solution. Based on thermodynamic analysis, the findings indicate that radiocesium transmutation provides a mean to weaken the binding of Cs in phyllosilicate minerals, therefore potentially involving a premature re-release of Cs back into the environment. In the case where radiogenic Ba 2+ ions accumulate in the mineral, collateral effects would ultimately be an increase in the overall interlayer binding energy and a lower resorption capacity.

Offline modeling for product quality prediction of mineral processing using modeling error PDF shaping and entropy minimization.

PubMed

Ding, Jinliang; Chai, Tianyou; Wang, Hong

2011-03-01

This paper presents a novel offline modeling for product quality prediction of mineral processing which consists of a number of unit processes in series. The prediction of the product quality of the whole mineral process (i.e., the mixed concentrate grade) plays an important role and the establishment of its predictive model is a key issue for the plantwide optimization. For this purpose, a hybrid modeling approach of the mixed concentrate grade prediction is proposed, which consists of a linear model and a nonlinear model. The least-squares support vector machine is adopted to establish the nonlinear model. The inputs of the predictive model are the performance indices of each unit process, while the output is the mixed concentrate grade. In this paper, the model parameter selection is transformed into the shape control of the probability density function (PDF) of the modeling error. In this context, both the PDF-control-based and minimum-entropy-based model parameter selection approaches are proposed. Indeed, this is the first time that the PDF shape control idea is used to deal with system modeling, where the key idea is to turn model parameters so that either the modeling error PDF is controlled to follow a target PDF or the modeling error entropy is minimized. The experimental results using the real plant data and the comparison of the two approaches are discussed. The results show the effectiveness of the proposed approaches.

MRI differentiation of low-grade from high-grade appendicular chondrosarcoma.

PubMed

Douis, Hassan; Singh, Leanne; Saifuddin, Asif

2014-01-01

To identify magnetic resonance imaging (MRI) features which differentiate low-grade chondral lesions (atypical cartilaginous tumours/grade 1 chondrosarcoma) from high-grade chondrosarcomas (grade 2, grade 3 and dedifferentiated chondrosarcoma) of the major long bones. We identified all patients treated for central atypical cartilaginous tumours and central chondrosarcoma of major long bones (humerus, femur, tibia) over a 13-year period. The MRI studies were assessed for the following features: bone marrow oedema, soft tissue oedema, bone expansion, cortical thickening, cortical destruction, active periostitis, soft tissue mass and tumour length. The MRI-features were compared with the histopathological tumour grading using univariate, multivariate logistic regression and receiver operating characteristic curve (ROC) analyses. One hundred and seventy-nine tumours were included in this retrospective study. There were 28 atypical cartilaginous tumours, 79 grade 1 chondrosarcomas, 36 grade 2 chondrosarcomas, 13 grade 3 chondrosarcomas and 23 dedifferentiated chondrosarcomas. Multivariate analysis demonstrated that bone expansion (P = 0.001), active periostitis (P = 0.001), soft tissue mass (P < 0.001) and tumour length (P < 0.001) were statistically significant differentiating factors between low-grade and high-grade chondral lesions with an area under the ROC curve of 0.956. On MRI, bone expansion, active periostitis, soft tissue mass and tumour length can reliably differentiate high-grade chondrosarcomas from low-grade chondral lesions of the major long bones. • Accurate differentiation of low-grade from high-grade chondrosarcomas is essential before surgery • MRI can reliably differentiate high-grade from low-grade chondrosarcomas of long bone • Differentiating features are bone expansion, periostitis, soft tissue mass and tumour length • Presence of these four MRI features demonstrated a diagnostic accuracy (AUC) of 95.6 % • The findings

Mineral resource potential map of the Raywood Flat Roadless Areas, Riverside and San Bernardino counties, California

USGS Publications Warehouse

Matti, Jonathan C.; Cox, Brett F.; Iverson, Stephen R.

1983-01-01

The area having moderate potential for base-metal resources forms a small zone in the eastern part of the recommended wilderness (A5-187). Within this zone, evidence provided by stream-sediment geochemistry suggests that crystalline bedrocks in several drainages contain concentrations of metallic elements. Because the terrain is inaccessible and covered with dense brush, most of the bedrock in the specific drainages containing the geochemical anomalies could not be examined. Thus, although we infer that mineral occurrences exist in the drainage basins, we have little data on which to base an estimate of their extent and quality. Locally, the crystalline rocks probably contain hydrothermal veins or disseminated occurrences where lead, copper, molybdenum, tin, cobalt, bismuth, and arsenic have been concentrated. However, the geochemical anomalies for these metals are small, and the stream drainages also are relatively small. Therefore, the inferred occurrences of metallic minerals probably are small scale, scattered, and low grade. There is only low probability that the inferred mineral occurrences are large scale.

Rare earth mineral potential in the southeastern U.S. Coastal Plain from integrated geophysical, geochemical, and geological approaches

USGS Publications Warehouse

Shah, Anjana K.; Bern, Carleton R.; Van Gosen, Bradley S.; Daniels, David L.; Benzel, William M.; Budahn, James R.; Ellefsen, Karl J.; Karst, Adam; Davis, Richard

2017-01-01

We combined geophysical, geochemical, mineralogical, and geological data to evaluate the regional presence of rare earth element (REE)−bearing minerals in heavy mineral sand deposits of the southeastern U.S. Coastal Plain. We also analyzed regional differences in these data to determine probable sedimentary provenance. Analyses of heavy mineral separates covering the region show strong correlations between thorium, monazite, and xenotime, suggesting that radiometric equivalent thorium (eTh) can be used as a geophysical proxy for those REE-bearing minerals. Airborne radiometric data collected during the National Uranium Resource Evaluation (NURE) program cover the southeastern United States with line spacing varying from ∼2 to 10 km. These data show eTh highs over Cretaceous and Tertiary Coastal Plain sediments from the Cape Fear arch in North Carolina to eastern Alabama; these highs decrease with distance from the Piedmont. Quaternary sediments along the modern coasts show weaker eTh anomalies, except near coast-parallel ridges from South Carolina to northern Florida. Prominent eTh anomalies are also observed over large riverbeds and their floodplains, even north of the Cape Fear arch where surrounding areas are relatively low. These variations were verified using ground geophysical measurements and sample analyses, indicating that radiometric methods are a useful exploration tool at varying scales. Further analyses of heavy mineral separates showed regional differences, not only in concentrations of monazite, but also of rutile and staurolite, and in magnetic susceptibility. The combined properties suggest the presence of subregions where heavy mineral sediments are primarily sourced from high-grade metamorphic, low-grade metamorphic, or igneous terrains, or where they represent a mixing of these sources. Comparisons between interpreted sources of heavy mineral sands near the Fall Line and igneous and metamorphic Piedmont and Blue Ridge units showed a strong

The Development of the easyCBM CCSS Reading Assessments: Grade 3. Technical Report #1221

ERIC Educational Resources Information Center

Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we document the development and piloting of easyCBM reading measures aligned to the Common Core State Standards, designed for use in screening students at risk for reading difficulty and monitoring their progress as they develop reading skills. The measures, which assess students' ability to respond to…

Annual Technical Progress Report for Emergency School Assistance Program, Title 45, 1970-71.

ERIC Educational Resources Information Center

Lindsey, Randall B.

This paper presents a technical progress report of two programs conducted with funds provided under the Emergency School Assistance Program. One, the Mobile Learning Unit, said to have been designed to measure changes in fourth and fifth grade students' self-concept in a reorganized desegregated school environment, focuses on whether a positive…

Web Based Technical Problem Solving for Enhancing Writing Skills of Secondary Vocational Students

ERIC Educational Resources Information Center

Papantoniou, Eleni; Hadzilacos, Thanasis

2017-01-01

We discuss some aspects of a pilot e-learning technical writing course addressed to 11th grade vocational high school students in Greece. The application of this alternative teaching intervention stemmed from the researcher-instructor's reflections relating to the integration of a problem based e-pedagogy that aims not just to familiarize students…

Identifying Professional Development Needs in Mathematics: A Planning Tool for Grades 3-7. Second Edition

ERIC Educational Resources Information Center

Taylor, Mary Jo; Dimino, Joseph A.; Gellar, Leanne Ketterlin; Koontz, Trish

2010-01-01

This document offers a planning tool for grades 3-7 that can be used by regional comprehensive centers, other technical assistance centers, and state departments of education to plan professional development for teachers. It is based on the "National Mathematics Advisory Panel Report" which was published in 2008. The panel synthesized its final…

U.S. Geological Survey Mineral Resources Program - Science Supporting Mineral Resource Stewardship

USGS Publications Warehouse

Kropschot, S.J.

2007-01-01

The United States is the world's largest user of mineral resources. We use them to build our homes and cities, fertilize our food crops, and create wealth that allows us to buy goods and services. Individuals rarely use nonfuel mineral resources in their natural state - we buy light bulbs, not the silica, soda ash, lime, coal, salt, tungsten, copper, nickel, molybdenum, iron, manganese, aluminum, and zinc used to convert electricity into light. The USGS Mineral Resources Program (MRP) is the sole Federal source of scientific information and unbiased research on nonfuel mineral potential, production, and consumption, as well as on the environmental effects of minerals. The MRP also provides baseline geochemical, geophysical, and mineral-deposit data used to understand environmental issues related to extraction and use of mineral resources. Understanding how minerals, water, plants, and organisms interact contributes to our understanding of the environment, which is essential for maintaining human and ecosystem health. To support creation of economic and national security policies in a global context, MRP collects and analyzes data on essential mineral commodities from around the world.

7 CFR 51.1576 - U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large. 51.1576 Section 51.1576 Agriculture Regulations of the Department of...) United States Consumer Standards for Potatoes Grades § 51.1576 U.S. Grade B Small; U.S. Grade B Medium; U...

7 CFR 51.1575 - U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large. 51.1575 Section 51.1575 Agriculture Regulations of the Department of...) United States Consumer Standards for Potatoes Grades § 51.1575 U.S. Grade A Small; U.S. Grade A Medium; U...

7 CFR 51.1576 - U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false U.S. Grade B Small; U.S. Grade B Medium; U.S. Grade B Medium to Large; U.S. Grade B Large. 51.1576 Section 51.1576 Agriculture Regulations of the Department of...) United States Consumer Standards for Potatoes Grades § 51.1576 U.S. Grade B Small; U.S. Grade B Medium; U...

7 CFR 51.1575 - U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false U.S. Grade A Small; U.S. Grade A Medium; U.S. Grade A Medium to Large; U.S. Grade A Large. 51.1575 Section 51.1575 Agriculture Regulations of the Department of...) United States Consumer Standards for Potatoes Grades § 51.1575 U.S. Grade A Small; U.S. Grade A Medium; U...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 7 2014-01-01 2014-01-01 false Grades and grade requirements for mixed grain. 810.804... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Grades and Grade Requirements § 810.804 Grades and grade requirements for mixed grain. (a) U.S. Mixed Grain (grade). Mixed grain...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for mixed grain. 810.804... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Grades and Grade Requirements § 810.804 Grades and grade requirements for mixed grain. (a) U.S. Mixed Grain (grade). Mixed grain...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 7 2012-01-01 2012-01-01 false Grades and grade requirements for mixed grain. 810.804... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Grades and Grade Requirements § 810.804 Grades and grade requirements for mixed grain. (a) U.S. Mixed Grain (grade). Mixed grain...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Grades and grade requirements for mixed grain. 810.804... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Grades and Grade Requirements § 810.804 Grades and grade requirements for mixed grain. (a) U.S. Mixed Grain (grade). Mixed grain...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Grades and grade requirements for mixed grain. 810.804... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Grades and Grade Requirements § 810.804 Grades and grade requirements for mixed grain. (a) U.S. Mixed Grain (grade). Mixed grain...

Students' Self-Grading, Professor's Grading and Negotiated Final Grading at Three University Programmes: Analysis of Reliability and Grade Difference Ranges and Tendencies

ERIC Educational Resources Information Center

Lopez-Pastor, Victor M.; Fernandez-Balboa, Juan-Miguel; Santos Pastor, Maria L.; Aranda, Antonio Fraile

2012-01-01

This study was undertaken at three teacher education programmes and was designed to determine the following within each programme: (1) the reliability correlations among students' self-grade (SSG), the grade granted by the professor (PG) and the negotiated final grade (NFG); (2) the range and frequency of grade differences between SSG and PG; and…

42 CFR 21.29 - Eligibility; grades above senior assistant grade.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Eligibility; grades above senior assistant grade... PERSONNEL COMMISSIONED OFFICERS Appointment § 21.29 Eligibility; grades above senior assistant grade. Every candidate for examination for appointment in grades above that of senior assistant shall meet the...

Mapped minerals at Questa, New Mexico, using airborne visible-infrared imaging spectrometer (AVIRIS) data -- Preliminary report

USGS Publications Warehouse

Livo, K. Eric; Clark, Roger N.

2002-01-01

This preliminary study for the First Quarterly Report has spectrally mapped hydrothermally altered minerals useful in assisting in assessment of water quality of the Red River. Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) data was analyzed to characterize mined and unmined ground at Questa, New Mexico. AVIRIS data covers the Red River drainage north of the river, from between the town of Questa on the west, to east of the town of Red River. The data was calibrated and analyzed using U.S. Geological Survey custom software and spectral mineral library. AVIRIS data was tested for spectral features that matched similar features in the spectral mineral library. Goodness-of-fit and band-depth were calculated for each comparison of spectral features and used to identify surface mineralogy. Mineral distribution, mineral associations, and AVIRIS pixel spectra were examined. Mineral maps show the distribution of iron hydroxides, iron sulfates, clays, micas, carbonates, and other minerals. Initial results show a system of alteration suites that overprint each other. Quartz-sericite-pyrite (QSP) alteration grading out to propylitic alteration (epidote and calcite) was identified at the Questa Mine (molybdenum porphyry) and a similar alteration pattern was mapped at the landslide (?scar?) areas. Supergene weathering overprints the altered rock, as shown by jarosite, kaolinite, and gypsum. In the spectral analysis, hydrothermally altered ground appears to be more extensive at the unmined Goat Hill Gulch and the mined ground, than the ?scars? to the east. Though the ?scars? have similar overall altered mineral suites, there are differences between the ?scars? in sericite, kaolinite, jarosite, gypsum, and calcite abundance. Fieldwork has verified the results at the central unmined ?scar? areas.

7 CFR 810.404 - Grades and grade requirements for corn.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Grades and grade requirements for corn. 810.404... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Corn Principles Governing the Application of Standards § 810.404 Grades and grade requirements for corn. Grade Minimum test weight per...

7 CFR 810.404 - Grades and grade requirements for corn.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for corn. 810.404... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Corn Principles Governing the Application of Standards § 810.404 Grades and grade requirements for corn. Grade Minimum test weight per...

Florida Center for Reading Research (FCRR) Reading Assessment (FRA): Grades 3 through 12. Technical Manual

ERIC Educational Resources Information Center

Foorman, Barbara R.; Petscher, Yaacov; Schatschneider, Chris

2015-01-01

The Florida Center for Reading Research (FCRR) Reading Assessment (FRA) consists of computer-adaptive reading comprehension and oral language screening tasks that provide measures to track growth over time, as well as a Probability of Literacy Success (PLS) linked to grade-level performance (i.e., the 50th percentile) on the reading comprehension…

Unintentional Helping in the Primary Grades: Writing in the Children's World. Technical Report No. 2.

ERIC Educational Resources Information Center

Dyson, Anne Haas

Focusing on children's developmental use of written language in kindergarten and first grade, this report looks at connections between the social and academic dimensions of classroom life. The first section examines literacy as an aspect of growing up and becoming a member of society. By highlighting the social and academic divisiveness schooling…

43 CFR 3000.8 - Management of Federal minerals from reserved mineral estates.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Management of Federal minerals from reserved mineral estates. 3000.8 Section 3000.8 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERALS...

43 CFR 3000.8 - Management of Federal minerals from reserved mineral estates.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Management of Federal minerals from reserved mineral estates. 3000.8 Section 3000.8 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERALS...

43 CFR 3000.8 - Management of Federal minerals from reserved mineral estates.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Management of Federal minerals from reserved mineral estates. 3000.8 Section 3000.8 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERALS...

43 CFR 3000.8 - Management of Federal minerals from reserved mineral estates.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Management of Federal minerals from reserved mineral estates. 3000.8 Section 3000.8 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERALS...

Rocks and Minerals.

ERIC Educational Resources Information Center

Naturescope, 1987

1987-01-01

Provides background information on rocks and minerals, including the unique characteristics of each. Teaching activities on rock-hunting and identification, mineral configurations, mystery minerals, and growing crystals are provided. Reproducible worksheets are included for two of the activities. (TW)

Analysis of some elements in primary enamel during postnatal mineralization.

PubMed

Sabel, Nina; Klinberg, Gunilla; Nietzsche, Sandor; Robertson, Agneta; Odelius, Hans; Norén, Jörgen G

2009-01-01

The primary teeth start to mineralize in utero and continue development and maturation during the first year of life.The aim of this study was to investigate the concentrations of some elements, C, F, Na, Mg, Cl, K and Sr, by secondary ion mass spectrometry (SIMS) in human primary incisors at different stages of mineralization.The teeth derived from an autopsy material from children who had died in sudden infant death.The buccal enamel of specimens from the ages 1, 2, 3, 4, 6 and 19 months, respectively, was analyzed. It was evident that posteruptive effects play an important role in composition of the outermost parts of the enamel. Before the tooth erupts, the concentrations of the elements vary with the maturation grade of the mineralization in the enamel. Sodium was the element with the highest concentration of the measured elements and chlorine was the element of lowest concentration.The 19 month old specimen, considered as the only mature and erupted tooth, showed to differ from the other specimens.The concentration of fluorine, in the 19 month old specimen's outermost surface, is readily seen higher compared with the other specimens at this depth zone. In the 19 month old specimen the concentration of carbon is lower. Potassium, sodium and chlorine have higher concentrations, in general, in the 19 month old specimen compared with the immature specimens. The thickness of the enamel during mineralization was calculated from data from SIMS.The thickness of the buccal enamel of primary incisors seemed to be fully developed between 3-4 months after birth, reaching a thickness of 350-400 microm.

Assessment of design tools and criteria for urban rail track structures : volume 1. at-grade tie-ballast track.

DOT National Transportation Integrated Search

1974-04-30

The report presents the results of a critical review of the technical factors which govern the design and performance of at-grade tie-ballast track for urban rail systems. The assessment of current design practice is based on a review of the literatu...

Influence of dunite mineral additive on strength of cement

NASA Astrophysics Data System (ADS)

Vasilyeva, A. A.; Moskvitina, L. V.; Moskvitin, S. G.; Lebedev, M. P.; Fedorova, G. D.

2017-12-01

The work studies the applicability of dunite rocks from Inagli massif (South Yakutia) for the production of mixed (composite) cement. The paper reviews the implementation of dunite for manufacturing materials and products. The chemical and mineral compositions of Inagli massif dunite rocks are presented, which relegate the rocks to magnesia-silicate rocks of low-quality in terms of its application as refractory feedstock due to appreciable serpentinization of dunite. The work presents the results of dunite study in terms of its applicability as an additive to Portland cement. The authors have established that dunite does not feature hydraulicity and can be used as a filling additive to Portland cement in the amount of up to 40%. It was unveiled that the mixed grinding of Portland cement and dunite sand with specific surface area of 5500 cm2/g yields the cement that complies with GOST 31108-2016 for CEM II and CEM V normal-cured cements with strength grades of 32.5 and 42.5. The work demonstrates the benefits of the studies of dunite as a filling additive for producing both Portland cement with mineral component and composite (mixed) cement.

Origin and prospectivity of heavy mineral enriched sand deposits along the Somaliland coastal areas

NASA Astrophysics Data System (ADS)

Ali, M. Y.; Hibberd, P.; Stoikovich, B.

2018-04-01

Sixty-one heavy mineral enriched samples along the Somaliland coast from Eil Sheikh to Ras Khatib, a distance of about 130 km, were analyzed using X-ray Fluorescence, X-ray Diffraction and SEM-EDS techniques. This study reveals that a considerable amount of heavy minerals is present along the Somaliland coast and confirms the presence of high concentration titanium and iron bearing minerals. However, the backshore deposits in the mouths of Waaheen and Biyo Gure ephemeral rivers as well as raised paleo-beaches in the east of port city of Berbera demonstrate the highest level of titaniferous heavy minerals with most samples showing concentration greater than 50 wt %. The titanium detected in geochemical analysis occurs in the form of ilmenite, rutile, titanite and titaniferous magnetite. Also, present in minor or trace amounts, are garnet, zircon and monazite. Heavy mineral accumulations in the east and west of Berbera have different mineralogical assemblages. The east of Berbera is dominated by quartz with moderate concentration of plagioclase, K-feldspar, magnetite, hematite and titanium bearing minerals, whereas in the west of Berbera, the dominant minerals are quartz, K-feldspar and plagioclase with variable proportions of ilmenite, rutile, mica, amphibole and pyroxene. These variations in mineral assemblages suggest different composition of the catchment areas that supply sediment to these deposits. The catchment area in the east of Berbera consists mainly of Proterozoic crystalline basement of the Qabri Bahar complex, Gabbro-Synenite belt and granitic intrusions that outcrop in Hudiso, Tulo Dibijo and surrounding areas. The primary sources of heavy minerals in the west of Berbera comprise of high-grade metamorphic rocks of the Mora and Qabri Bahar complexes as well as the Miocene volcanics that outcrop in Laferug and Hagabo areas. The heavy mineral sand deposits observed along the Somaliland coast have the potential to provide commercially important heavy

Innovative Concepts and Technology for Railroad-Highway Grade Crossing Motorist Warning Systems : Volume 1. Overview and Concept Generation and Analysis

DOT National Transportation Integrated Search

1977-09-01

The document includes a general review of innovative conceptual and technical approaches to train-activated motorist warning systems for use at railroad-highway grade crossings, and also contains a specific report describing a study directed toward t...

Gold Rush. Fourth Grade Activity. Schools of California Online Resources for Education (SCORE): Connecting California's Classrooms to the World.

ERIC Educational Resources Information Center

Krupnick, Karen

In 1875, a man fishing in the isolated Trout River of California discovered several large gold nuggets. This lesson plan asks fourth-grade students to develop a plan to avoid another 1849 gold rush. The plan is to design a new town while considering transportation, housing, food and goods for the miners, and the preservation of the area's…

Geology and mineral deposits of the St. Regis-Superior area, Mineral County, Montana

USGS Publications Warehouse

Campbell, Arthur B.

1960-01-01

County, has been traced to the east edge of the St. Regis- Superior area, thus extending the mapped length of the fault to about 100 miles. Evidence indicates that this major fault has diminished in intensity in this area and that most of the stress has been relieved along the Boyd Mountain fault that apparently splits from the Osburn fault a few miles west of St. Regis. Stratigraphic and structural evidence indicates a strike-slip right-lateral movement of about 3 miles along the Osburn fault. Horizontal stratigraphic separation along the Boyd Mountain fault indicates a right-lateral movement of about 13 miles.Low-grade regional metamorphism of the sedimentary rocks in the area has caused the recrystallization of quartz grains and the formation of sericite. Argillite and quartzite have been converted to phyllite and foliated quartzite by dynamic metamorphism in a large area north of the central part of the Osburn fault. Some of the shear zones contain a large amount of introduced carbonate minerals. From 1901 through 1953 this area has produced 8,086,827 pounds of zinc, 7,932,958 pounds of lead, 2,053,715 pounds of copper, 584,168 fine ounces of silver, and 588 fine ounces of gold. The lead, sine, and silver have come chiefly from veins in highly foliated rocks near the Osburn fault zone. The attitudes of these veins are controlled in large part by the cleavage. The principal ore minerals are galena, sphalerite, tetrahedrite, and boulangerite, and the gangue minerals are quartz, carbonate minerals, and barite. Most of the copper has come from the Amador vein where chalcopyrite and bornite are the principal ore minerals, and the gangue minerals are pyrite, quartz, and carbonate minerals. The Amador vein occurs in a belt of copper deposits that extends westward into the Coeur d'Alene district. These copper deposits may be genetically associated with diorite dikes and sills lying within the same belt. Fluorspar has been found in three closely spaced prospects along a

Agreement on Use of 11th Grade Smarter Balanced Assessment Results for Student Placement. Issue Brief

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

This issue brief lists the agreement principles relating to the use of 11th grade career and college readiness assessment results for student placement in Washington community and technical colleges. As part of the Washington implementation of the new Common Core State Standards for college- and career-readiness, the agreement described herein has…

[Update of recommendations for evaluation and treatment of osteoporosis associated to endocrine and nutritional conditions. Working Group on Osteoporosis and Mineral Metabolism of the Spanish Society of Endocrinology].

PubMed

Reyes-García, Rebeca; García-Martín, Antonia; Varsavsky, Mariela; Rozas-Moreno, Pedro; Cortés-Berdonces, María; Luque-Fernández, Inés; Gómez Sáez, José Manuel; Vidal Casariego, Alfonso; Romero Muñoz, Manuel; Guadalix Iglesias, Sonsoles; Fernández García, Diego; Jódar Gimeno, Esteban; Muñoz Torres, Manuel

2015-05-01

To update previous recommendations developed by the Working Group on Osteoporosis and Mineral Metabolism of the Spanish Society of Endocrinology and Nutrition for the evaluation and treatment of osteoporosis associated to different endocrine and nutritional diseases. Members of the Working Group on Osteoporosis and Mineral Metabolism of the Spanish Society of Endocrinology and Nutrition. Recommendations were formulated according to the GRADE system (Grading of Recommendations, Assessment, Development, and Evaluation) to describe both the strength of recommendations and the quality of evidence. A systematic search was made in MEDLINE (Pubmed) using the following terms associated to the name of each condition: AND "osteoporosis", "fractures", "bone mineral density", and "treatment". Papers in English with publication date between 18 October 2011 and 30 October 2014 were included. The recommendations were discussed and approved by all members of the Working Group. This update summarizes the new data regarding evaluation and treatment of osteoporosis associated to endocrine and nutritional conditions. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

Underground mineral extraction

NASA Technical Reports Server (NTRS)

Miller, C. G.; Stephens, J. B.

1980-01-01

A method was developed for extracting underground minerals such as coal, which avoids the need for sending personnel underground and which enables the mining of steeply pitched seams of the mineral. The method includes the use of a narrow vehicle which moves underground along the mineral seam and which is connected by pipes or hoses to water pumps at the surface of the Earth. The vehicle hydraulically drills pilot holes during its entrances into the seam, and then directs sideward jets at the seam during its withdrawal from each pilot hole to comminute the mineral surrounding the pilot hole and combine it with water into a slurry, so that the slurried mineral can flow to a location where a pump raises the slurry to the surface.

Hardwood log grades and lumber grade yields for factory lumber logs

Treesearch

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

Preliminary publications book 2 from project on mineral resources, metallogenesis, and tectonics of northeast Asia

USGS Publications Warehouse

Nokleberg, Warren J.; Miller, Robert J.; Naumova, Vera V.; Khanchuk, Alexander I.; Parfenov, Leonid M.; Kuzmin, Mikhail I.; Bounaeva, Tatiana M.; Obolenskiy, Alexander A.; Rodionov, Sergey M.; Seminskiy, Zhan V.; Diggles, Michael F.

2003-01-01

This is the Web version of a CD-ROM publication. This report consists of summary major compilations and syntheses accomplished in the six-year project through April 2003 for the study on the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia (Eastern and Southern Siberia, Mongolia, Northeastern China, South Korea, and Japan). The major scientific goals and benefits of the project are to: (1) provide a comprehensive international data base on the mineral resources of the region that is the first, extensive knowledge available in English; (2) provide major new interpretations of the origin and crustal evolution of mineralizing systems and their host rocks, thereby enabling enhanced, broad-scale tectonic reconstructions and interpretations; and (3) promote trade and scientific and technical exchanges between the North America and Northeast Asia. Data from the project are providing sound scientific data and interpretations for commercial firms, governmental agencies, universities, and individuals that are developing new ventures and studies in the project area, and for land-use planning studies that deal with both mineral potential issues. Northeast Asia has vast potential for known and undiscovered mineral deposits; however, little information existed in English in the West until publication of products from this project. Consequently, data and interpretations from the project are providing basic knowledge for major scientific, commercial, national, and international endeavors by other interested individuals and groups.

Exploiting mineral data: applications to the diversity, distribution, and social networks of copper mineral

NASA Astrophysics Data System (ADS)

Morrison, S. M.; Downs, R. T.; Golden, J. J.; Pires, A.; Fox, P. A.; Ma, X.; Zednik, S.; Eleish, A.; Prabhu, A.; Hummer, D. R.; Liu, C.; Meyer, M.; Ralph, J.; Hystad, G.; Hazen, R. M.

2016-12-01

We have developed a comprehensive database of copper (Cu) mineral characteristics. These data include crystallographic, paragenetic, chemical, locality, age, structural complexity, and physical property information for the 689 Cu mineral species approved by the International Mineralogical Association (rruff.info/ima). Synthesis of this large, varied dataset allows for in-depth exploration of statistical trends and visualization techniques. With social network analysis (SNA) and cluster analysis of minerals, we create sociograms and chord diagrams. SNA visualizations illustrate the relationships and connectivity between mineral species, which often form cliques associated with rock type and/or geochemistry. Using mineral ecology statistics, we analyze mineral-locality frequency distribution and predict the number of missing mineral species, visualized with accumulation curves. By assembly of 2-dimensional KLEE diagrams of co-existing elements in minerals, we illustrate geochemical trends within a mineral system. To explore mineral age and chemical oxidation state, we create skyline diagrams and compare trends with varying chemistry. These trends illustrate mineral redox changes through geologic time and correlate with significant geologic occurrences, such as the Great Oxidation Event (GOE) or Wilson Cycles.

Innovative Concepts and Technology for Railroad-Highway Grade Crossing Motorist Warning Systems : Volume 2. The Generation and Analysis of Alternative Concepts

DOT National Transportation Integrated Search

1977-09-01

The report describes the results of a study directed toward the generation, analysis and evaluation of innovative conceptual and technical approaches to train-activated motorist warning systems for use at railroad-highway grade crossings. Particular ...

Animal...Vegetable...or Mineral?

ERIC Educational Resources Information Center

Cameron, Eugene

1973-01-01

Outlines the problems facing the United States with mineral reserves being depleted, and the consumption of minerals outstripping production. Expresses concern about the deteriorating mineral position, and the ignorance and confusion of the public with respect to mineral production and supply, energy requirements, and environmental consequences.…

Systemic effect of mineral aggregate-based cements: histopathological analysis in rats.

PubMed

Garcia, Lucas da Fonseca Roberti; Huck, Claudia; Magalhães, Fernando Augusto Cintra; Souza, Pedro Paulo Chaves de; Souza Costa, Carlos Alberto de

2017-01-01

Several studies reported the local tissue reaction caused by mineral aggregate-based cements. However, few studies have investigated the systemic effects promoted by these cements on liver and kidney when directly applied to connective tissue. The purpose of this in vivo study was to investigate the systemic effect of mineral aggregate-based cements on the livers and kidneys of rats. Samples of Mineral Trioxide Aggregate (MTA) and a calcium aluminate-based cement (EndoBinder) containing different radiopacifiers were implanted into the dorsum of 40 rats. After 7 and 30 d, samples of subcutaneous, liver and kidney tissues were submitted to histopathological analysis. A score (0-3) was used to grade the inflammatory reaction. Blood samples were collected to evaluate changes in hepatic and renal functions of animals. The moderate inflammatory reaction (2) observed for 7 d in the subcutaneous tissue decreased with time for all cements. The thickness of inflammatory capsules also presented a significant decrease with time (P<.05). Systemically, all cements caused adverse inflammatory reactions in the liver and kidney, being more evident for MTA, persisting until the end of the analysis. Liver functions increased significantly for MTA during 30 d (P<.05). The different cements induced to a locally limited inflammatory reaction. However, from the systemic point of view, the cements promoted significant inflammatory reactions in the liver and kidney. For MTA, the reactions were more accentuated.

Residence of silver in mineral deposits of the Thunder Mountain caldera complex, Central Idaho, U.S.A.

USGS Publications Warehouse

Leonard, B.F.; Christian, R.P.

1987-01-01

Silver is an accessory element in gold, antimony, and tungsten deposits of the caldera complex. Most of the deposits are economically of low grade and genetically of xenothermal or epithermal character. Their gold- and silver-bearing minerals are usually disseminated, fine grained, and difficult to study. Sparsely disseminated pyrite and arsenoprite are common associates. Identified silver minerals are: native silver and electrum; the sulfides acanthite, argentite (the latter always inverted to acanthite), and members of the Silberkies group; the sulfosalts matildite, miargyrite, pyrargyrite, argentian tetrahedrite, and unnamed Ag-Sb-S and Ag-Fe-Sb-S minerals; the telluride hessite and the selenide naumannite; halides of the cerargyrite group; and the antimonate stetefeldtite. Suspected silver minerals include the sulfide uytenbogaardtite and the sulfosalts andorite, diaphorite, and polybasite. Electrum, acanthite, and argentian tetrahedrite are common, though nowhere abundant. The other silver minerals are rare. Silver is present as a minor element in the structure of some varieties of other minerals. These include arsenopyrite, chalcopyrite, chalcostibite, covelline, digenite, galena, sphalerite, and stibnite. The search for adventitious Ag in most of these minerals has been cursory. The results merely indicate that elemental silver is not confined to discrete silver minerals and is, therefore, an additional complication for the recovery of silver-bearing material from some deposits. Silver occurs cryptically in some plants of the region. At Red Mountain, for example, the ashed sapwood of Douglas-fir (Pseudotsuga menziesii) contains 2 to 300 ppm Ag. Silver in the ashed wood is roughly 100 times as abundant as it is in soil. The phenomenon, useful in biogeochemical exploration, deserves the attention of mineralogists. ?? 1987 Springer-Verlag.

Degradation of N-nitrosodimethylamine (NDMA) and its precursor dimethylamine (DMA) in mineral micropores induced by microwave irradiation.

PubMed

He, Yuanzhen; Cheng, Hefa

2016-05-01

Removal of N-nitrosodimethylamine (NDMA) in drinking water treatment poses a significant technical challenge due to its small molecular size, high polarity and water solubility, and poor biodegradability. Degradation of NDMA and its precursor, dimethylamine (DMA), was investigated by adsorbing them from aqueous solution using porous mineral sorbents, followed by destruction under microwave irradiation. Among the mineral sorbents evaluated, dealuminated ZSM-5 exhibited the highest sorption capacities for NDMA and DMA, which decreased with the density of surface cations present in the micropores. In contrast, the degradation rate of the sorbed NDMA increased with the density of surface cations under microwave irradiation. Evolutions of the degradation products and C/N ratio indicate that the sorbed NDMA and DMA could be eventually mineralized under continuous microwave irradiation. The degradation rate was strongly correlated with the bulk temperature of ZSM-5 and microwave power, which is consistent with the mechanism of pyrolysis caused by formation of micro-scale "hot spots" within the mineral micropores under microwave irradiation. Compared to existing treatment options for NDMA removal, microporous mineral sorption coupled with microwave-induced degradation has the unique advantages of being able to simultaneously remove NDMA and DMA and cause their full mineralization, and thus could serve as a promising alternative method. Copyright © 2016 Elsevier Ltd. All rights reserved.

Geochemistry and provenance of some detrital heavy minerals of alluvial sediments from Neagra Şarului River, Eastern Carpathians, Romania

NASA Astrophysics Data System (ADS)

Ciortescu, Catalina; Iancu, Ovidiu Gabriel; Bulgariu, Dumitru; Popa, Ciprian

2014-05-01

The present work focuses on the analyses of a selection of heavy mineral assemblages sampled from the Neagra Şarului River's alluvia, in order to determine their provenance and distribution, using their geochemical and physical characteristics. The study focused on a mountain river of about 30 km long, located in the north-western part of the Eastern Carpathians, an important tributary of the Bistria River. The bedrocks in the river drainage basin are constituted mainly by igneous rocks from Călimani Volcanic Complex in the west, and secondarily by a small area of low to medium grade metamorphic rocks, part of Crystalline-Mesozoic Zone, in the east. In order to trace the source of each individual mineral species, we prepared our samples via field separation and subsequent laboratory sieving using 8 different size fractions. An electromagnetic separator (Frantz Isodynamic) was used to separate and classify each heavy minerals species, depending on their magnetic susceptibility. Thus prepared, more than 500 grains per samples (from the 0.5-1 mm size fraction) were mounted on thin sections and analyzed using a Cambridge Microscan M9 with EDS system. These analyses served for mineral identification and relative abundance determination. The classification of the minerals and the nature of their inclusions are derived from the major element compositions computed from SEM-EDX analysis. We also used a stereo microscope in order to determine complementary properties of the grains, such as: color, degree of roundness and degree of alteration. In order of abundance, the main heavy minerals are magnetite, hematite, pyroxene, pyrite, manganese oxides, garnet, apatite, titanium oxides (ilmenite, titanite and rutile/anatase), chlorite, olivine, epidote, biotite and rhodochrosite. A particularity of the studied area is the presence of an altered magnetite caused first by the hydrothermal alteration and strong weathering of the source rocks and second by the river's acid water

On-Demand Grades: The Effect of Online Grade Book Access on Student Mastery and Performance Goal Orientations, Grade Orientation, Academic Self Efficacy, and Grades

ERIC Educational Resources Information Center

Seldow, Adam Lowell

2010-01-01

With the widespread growth of broadband Internet access, teachers, and in many cases, schools and school districts are transitioning from traditional paper-based grade books to student accessible online (Web-based) grade books. Online grade books offer students 24/7, on demand access to grades and various other student data, and have the potential…

Grouping Minerals by Their Formulas

ERIC Educational Resources Information Center

Mulvey, Bridget

2018-01-01

Minerals are commonly taught in ways that emphasize mineral identification for its own sake or maybe to help identify rocks. But how do minerals fit in with other science content taught? The author uses mineral formulas to help Earth science students wonder about the connection between elements, compounds, mixtures, minerals, and mineral formulas.…

7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for sunflower seed. 810... AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Sunflower Seed Principles Governing the Application of Standards § 810.1804 Grades and grade requirements for sunflower seed. Grade...

7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Grades and grade requirements for sunflower seed. 810... AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Sunflower Seed Principles Governing the Application of Standards § 810.1804 Grades and grade requirements for sunflower seed. Grade...

Basic concepts in three-part quantitative assessments of undiscovered mineral resources

USGS Publications Warehouse

Singer, D.A.

1993-01-01

Since 1975, mineral resource assessments have been made for over 27 areas covering 5??106 km2 at various scales using what is now called the three-part form of quantitative assessment. In these assessments, (1) areas are delineated according to the types of deposits permitted by the geology,(2) the amount of metal and some ore characteristics are estimated using grade and tonnage models, and (3) the number of undiscovered deposits of each type is estimated. Permissive boundaries are drawn for one or more deposit types such that the probability of a deposit lying outside the boundary is negligible, that is, less than 1 in 100,000 to 1,000,000. Grade and tonnage models combined with estimates of the number of deposits are the fundamental means of translating geologists' resource assessments into a language that economists can use. Estimates of the number of deposits explicitly represent the probability (or degree of belief) that some fixed but unknown number of undiscovered deposits exist in the delineated tracts. Estimates are by deposit type and must be consistent with the grade and tonnage model. Other guidelines for these estimates include (1) frequency of deposits from well-explored areas, (2) local deposit extrapolations, (3) counting and assigning probabilities to anomalies and occurrences, (4) process constraints, (5) relative frequencies of related deposit types, and (6) area spatial limits. In most cases, estimates are made subjectively, as they are in meteorology, gambling, and geologic interpretations. In three-part assessments, the estimates are internally consistent because delineated tracts are consistent with descriptive models, grade and tonnage models are consistent with descriptive models, as well as with known deposits in the area, and estimates of number of deposits are consistent with grade and tonnage models. All available information is used in the assessment, and uncertainty is explicitly represented. ?? 1993 Oxford University Press.

Mining and Minerals Technical Advisory Committee on Curriculum Development. Job Clusters, Competencies and Task Analysis.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This skills inventory for mining occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from the mining industry, members of trade and professional associations, and educators. The validated task list and defined job…

Effects of Chinese mineral strategies on the U.S. minerals industry

USGS Publications Warehouse

McCartan, L.; Menzie, W.D.; Morse, D.E.; Papp, J.F.; Plunkert, P.A.; Tse, P.-K.

2006-01-01

For more than two decades now, China has been undergoing rapid economic growth and industrialization. The industrialization and urbanization of the once rural, farming nation is leading to increased consumption of mineral commodities to build infrastructure and to make into consumer goods. This increased consumption has led to higher mineral prices, lower stocks and, in some cases, temporary shortages of minerals. Chinese mineral producers and manufacturers are responding by building capacity, restructuring and modernizing industrial sectors and establishing international network that compete with those of the United States and other nations.

Grading for Understanding--Standards-Based Grading

ERIC Educational Resources Information Center

Zimmerman, Todd

2017-01-01

Standards-based grading (SBG), sometimes called learning objectives-based assessment (LOBA), is an assessment model that relies on students demonstrating mastery of learning objectives (sometimes referred to as standards). The goal of this grading system is to focus students on mastering learning objectives rather than on accumulating points. I…

Mineral resources of the Turtle Mountains Wilderness Study Area, San Bernardino County, California

USGS Publications Warehouse

Howard, Keith A.; Nielson, Jane E.; Simpson, Robert W.; Hazlett, Richard W.; Alminas, Henry V.; Nakata, John K.; McDonnell, John R.

1988-01-01

At the request of the U.S. Bureau of Land Management, approximately 105,200 acres of the Turtle Mountains Wilderness Study Area (CDCA-307) were evaluated for mineral resources (known) and resource potential (undiscovered). In this report, the area studied is referred to as "the wilderness study area" or simply "the study area"; any reference to the Turtle Mountain Wilderness Study Area refers only to that part of the wilderness study area for which a mineral survey was requested by the U.S. Bureau of Land Management.The wilderness study area is in southeastern San Bernardino County, Calif. Gold, silver, copper, and lead have been mined within and adjacent to the study area. Copper-zinc-silver-gold mineral occurrences are found in the southern part and gold-silver mineral occurrences are found in the northern part of the study area; identified low- to moderate-grade gold-silver resources occur adjacent to the study area along the western boundary. Six areas in the south-central and northwestern parts of the study area have high resource potential, two broad areas have moderate resource potential, and part of the southwest corner has low resource potential for lode gold, silver, and associated copper, lead, zinc, molybdenum, and tungsten. Alluvium locally within one of these areas has moderate resource potential for placer gold and silver, and the entire area has low resource potential for placer gold and silver. There is low resource potential for perlite, ornamental stone (onyx marble and opal), manganese, uranium and thorium, pegmatite minerals, and oil and gas within the study area. Sand and gravel are abundant but are readily available outside the wilderness study area.

Student Attitudes Toward Grades and Grading Practices.

ERIC Educational Resources Information Center

Stallings, William M.; Leslie, Elwood K.

The result of a study designed to assess student attitudes toward grading practices are discussed. Questionnaire responses of 3439 students in three institutions were tabulated. Responses were generally negative toward conventional grading systems. (MS)

7 CFR 810.405 - Special grades and special grade requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Corn Special Grades and Special Grade Requirements § 810.405 Special grades and special grade requirements. (a) Flint corn. Corn that consists of 95 percent or more of flint corn. (b) Flint and dent corn. Corn that consists of a mixture of...

7 CFR 810.405 - Special grades and special grade requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Corn Special Grades and Special Grade Requirements § 810.405 Special grades and special grade requirements. (a) Flint corn. Corn that consists of 95 percent or more of flint corn. (b) Flint and dent corn. Corn that consists of a mixture of...

[Occupational morbidity among miners engaged into contemporary method of extracting copper-nickel ores in Kola Transpolar regions].

PubMed

Siurin, S A; Shilov, V V

2014-01-01

The risks for developing occupational pathology and its specific features were studied in 358 Kola Transpolar copper-nickel miners who were diagnosed with 722 cases of occupational diseases (OD) in the years 1990-2013. The highest risk for developing OD, which are dominated by the diseases of the musculoskeletal system, has been found in tunnellers (OR = 12,8) and operators of drilling rigs (OR = 10,4). A significant increase in the risk of OD has been established in miners with length of service at 11-15 years and over 25 years. The conclusion is made about the need to improve the technical, medical and organizational measures targetted at preventing health problems in this group of workers.

43 CFR 3594.5 - Minerals soluble in water; brines; minerals taken in solution.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Minerals soluble in water; brines; minerals taken in solution. 3594.5 Section 3594.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) SOLID MINERALS (OTHER THAN COAL) EXPLORATION AND...

Mineral Resources of the Warm Springs Wilderness Study Area, Mohave County, Arizona

USGS Publications Warehouse

Gray, Floyd; Jachens, Robert C.; Miller, Robert J.; Turner, Robert L.; Knepper, Daniel H.; Pitkin, James A.; Keith, William J.; Mariano, John; Jones, Stephanie L.; Korzeb, Stanley L.

1986-01-01

At the request of the U.S. Bureau of Land Management, approximately 113,500 acres of the Warm Springs Wilderness Study Area (AZ-020-028/029) were evaluated for mineral resources and mineral resource potential. In this report, the area studied is referred to as the 'wilderness study area' or 'study area'; any reference to the Warm Springs Wilderness Study Area refers only to that part of the wilderness study area for which a mineral survey was requested. This study area is located in west-central Arizona. The U.S. Geological Survey and the U.S. Bureau of Mines conducted geological, geochemical, and geophysical surveys to appraise the identified mineral resources (known) and assess the mineral resource potential (undiscovered) of the study area. fieldwork for this report was carried out largely in 1986-1989. There is a 1-million short ton indicated subeconomic resource of clinoptilolite-mordenite zeolite and an additional inferred resource of 2 million short tons near McHeffy Butte, approximately 2 miles west of the study area. A perlite deposit in the southeast corner of the study area contains an inferred subeconomic resource totaling 13 million short tons. An inferred subeconomic resource of gold in 225 short tons of quartz having a grade of 0.01 8 troy ounces per short ton is present at the Cook mine, 0.5 miles west of the study area. The northwestern part of the Warm Springs Wilderness Study Area has high mineral resource potential for gold and silver. The south-central part of the study area has one area of moderate and one area north of this south-central part has low mineral resource potential for gold and silver in and near Warm Springs Canyon; the mineral resource potential for gold is also moderate in three small areas in the southern part and one area in the northeastern part of the study area. The mineral resource potential for zeolite is high for the area surrounding the McHeffy Butte prospect and for one area in the southern part of the study area. Two

Quantitative elemental analysis of an industrial mineral talc, using accelerator-based analytical technique

NASA Astrophysics Data System (ADS)

Olabanji, S. O.; Ige, A. O.; Mazzoli, C.; Ceccato, D.; Ajayi, E. O. B.; De Poli, M.; Moschini, G.

2005-10-01

Accelerator-based technique of PIXE was employed for the determination of the elemental concentration of an industrial mineral, talc. Talc is a very versatile mineral in industries with several applications. Due to this, there is a need to know its constituents to ensure that the workers are not exposed to health risks. Besides, microscopic tests on some talc samples in Nigeria confirm that they fall within the BP British Pharmacopoeia standard for tablet formation. However, for these samples to become a local source of raw material for pharmaceutical grade talc, the precise elemental compositions should be established which is the focus of this work. Proton beam produced by the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro, Padova, Italy was used for the PIXE measurements. The results which show the concentration of different elements in the talc samples, their health implications and metabolic roles are presented and discussed.

Draft critical mineral list—Summary of methodology and background information—U.S. Geological Survey technical input document in response to Secretarial Order No. 3359

USGS Publications Warehouse

Fortier, Steven M.; Nassar, Nedal T.; Lederer, Graham W.; Brainard, Jamie; Gambogi, Joseph; McCullough, Erin A.

2018-02-16

Pursuant to the Presidential Executive Order (EO) No. 13817, “A Federal Strategy to Ensure Secure and Reliable Supplies of Critical Minerals,” the Secretary of the Interior, in coordination with the Secretary of Defense, and in consultation with the heads of other relevant executive departments and agencies, was tasked with developing and submitting a draft list of minerals defined as “critical minerals” to the Federal Register within 60 days of the issue of the EO (December 20, 2017).Based on an analysis by the U.S. Geological Survey and other U.S. Government agencies, using multiple criteria, 35 minerals or mineral material groups have been identified that are currently (February 2018) considered critical. These include the following: aluminum (bauxite), antimony, arsenic, barite, beryllium, bismuth, cesium, chromium, cobalt, fluorspar, gallium, germanium, graphite (natural), hafnium, helium, indium, lithium, magnesium, manganese, niobium, platinum group metals, potash, rare earth elements group, rhenium, rubidium, scandium, strontium, tantalum, tellurium, tin, titanium, tungsten, uranium, vanadium, and zirconium. The categorization of minerals as critical may change during the course of the review process and is thus provisional.

25 CFR 215.25 - Other minerals and deep-lying lead and zinc minerals.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Other minerals and deep-lying lead and zinc minerals. 215.25 Section 215.25 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.25 Other minerals and deep-lying lead...

25 CFR 215.25 - Other minerals and deep-lying lead and zinc minerals.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Other minerals and deep-lying lead and zinc minerals. 215.25 Section 215.25 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.25 Other minerals and deep-lying lead...

25 CFR 215.25 - Other minerals and deep-lying lead and zinc minerals.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Other minerals and deep-lying lead and zinc minerals. 215.25 Section 215.25 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.25 Other minerals and deep-lying lead...

Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K): Third Grade Methodology Report. NCES 2005-018

ERIC Educational Resources Information Center

Tourangeau, Karen; Brick, Mike; Byrne, Lauren; Le, Thanh; Nord, Christine; West, Jerry; Hausken, Elvira Germino

2005-01-01

This methodology report provides technical information about the development, design, and conduct of the third grade data collection of the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K). Detailed information on the development of the instruments, sample design, data collection methods, data preparation and editing,…

Minerals in our environment

USGS Publications Warehouse

Weathers, Judy; Galloway, John; Frank, Dave

2000-01-01

Minerals are found everywhere in our daily lives. This poster depicts numerous items found throughout a home, and the mineral(s) or mineral resources used in the ingredients of, or construction/manufacturing of those items. Designed for K-8 Teachers this poster can be scaled and is printable at 36" x 60" and legible at 11" x 17" in size.

25 CFR 215.25 - Other minerals and deep-lying lead and zinc minerals.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Other minerals and deep-lying lead and zinc minerals. 215... LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.25 Other minerals and deep-lying lead and zinc minerals. Except as provided in § 215.6(b), leases on Quapaw Indian lands, for mining...

25 CFR 215.25 - Other minerals and deep-lying lead and zinc minerals.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Other minerals and deep-lying lead and zinc minerals. 215... LEAD AND ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.25 Other minerals and deep-lying lead and zinc minerals. Except as provided in § 215.6(b), leases on Quapaw Indian lands, for mining...

Defining reactive sites on hydrated mineral surfaces: Rhombohedral carbonate minerals

NASA Astrophysics Data System (ADS)

Villegas-Jiménez, Adrián; Mucci, Alfonso; Pokrovsky, Oleg S.; Schott, Jacques

2009-08-01

Despite the success of surface complexation models (SCMs) to interpret the adsorptive properties of mineral surfaces, their construct is sometimes incompatible with fundamental chemical and/or physical constraints, and thus, casts doubts on the physical-chemical significance of the derived model parameters. In this paper, we address the definition of primary surface sites (i.e., adsorption units) at hydrated carbonate mineral surfaces and discuss its implications to the formulation and calibration of surface equilibria for these minerals. Given the abundance of experimental and theoretical information on the structural properties of the hydrated (10.4) cleavage calcite surface, this mineral was chosen for a detailed theoretical analysis of critical issues relevant to the definition of primary surface sites. Accordingly, a single, generic charge-neutral surface site ( tbnd CaCO 3·H 2O 0) is defined for this mineral whereupon mass-action expressions describing adsorption equilibria were formulated. The one-site scheme, analogous to previously postulated descriptions of metal oxide surfaces, allows for a simple, yet realistic, molecular representation of surface reactions and provides a generalized reference state suitable for the calculation of sorption equilibria for rhombohedral carbonate minerals via Law of Mass Action (LMA) and Gibbs Energy Minimization (GEM) approaches. The one-site scheme is extended to other rhombohedral carbonate minerals and tested against published experimental data for magnesite and dolomite in aqueous solutions. A simplified SCM based on this scheme can successfully reproduce surface charge, reasonably simulate the electrokinetic behavior of these minerals, and predict surface speciation agreeing with available spectroscopic data. According to this model, a truly amphoteric behavior is displayed by these surfaces across the pH scale but at circum-neutral pH (5.8-8.2) and relatively high ΣCO 2 (⩾1 mM), proton/bicarbonate co

Reagan issues mineral policy

NASA Astrophysics Data System (ADS)

The National Materials and Minerals Program plan and report that President Reagan sent to Congress on April 5 aims to ‘decrease America's minerals vulnerability’ while reducing future dependence on potentially unstable foreign sources of minerals. These goals would be accomplished by taking inventory of federal lands to determine mineral potential; by meeting the stockpile goals set by the Strategic and Critical Material Stockpiling Act; and by establishing a business and political climate that would encourage private-sector research and development on minerals.Now that the Administration has issued its plan, the Subcommittee on Mines and Mining of the House Committee on Interior and Insular Affairs will consider the National Minerals Security Act (NMSA), which was introduced 1 year ago by subcommittee chairman Jim Santini (D-Nev.) [Eos, May 19, 1981, p. 497]. The bill calls for establishing a three-member White-House-level council to coordinate the development of a national minerals policy; amending tax laws to assist the mining industry to make capital investments to locate and produce strategic materials; and creating a revolving fund for the sale and purchase of strategic minerals. In addition, the NMSA bill would allow the secretary of the interior to make previously withdrawn public lands available for mineral development. The subcommittee will hold a hearing on the Administration's plan on May 11. Interior Secretary James Watt has been invited to testify.

Magnetic susceptibilities of minerals

USGS Publications Warehouse

Rosenblum, Sam; Brownfield, I.K.

2000-01-01

Magnetic separation of minerals is a topic that is seldom reported in the literature for two reasons. First, separation data generally are byproducts of other projects; and second, this study requires a large amount of patience and is unusually tedious. Indeed, we suspect that most minerals probably are never investigated for this property. These data are timesaving for mineralogists who concentrate mono-mineralic fractions for chemical analysis, age dating, and for other purposes. The data can certainly be used in the ore-beneficiation industries. In some instances, magnetic-susceptibility data may help in mineral identification, where other information is insufficient. In past studies of magnetic separation of minerals, (Gaudin and Spedden, 1943; Tille and Kirkpatrick, 1956; Rosenblum, 1958; Rubinstein and others, 1958; Flinter, 1959; Hess, 1959; Baker, 1962; Meric and Peyre, 1963; Rojas and others, 1965; and Duchesne, 1966), the emphasis has been on the ferromagnetic and paramagnetic ranges of extraction. For readers interested in the history of magnetic separation of minerals, Krumbein and Pettijohn (1938, p. 344-346) indicated nine references back to 1848. The primary purpose of this paper is to report the magnetic-susceptibility data on as many minerals as possible, similar to tables of hardness, specific gravity, refractive indices, and other basic physical properties of minerals. A secondary purpose is to demonstrate that the total and best extraction ranges are influenced by the chemistry of the minerals. The following notes are offered to help avoid problems in separating a desired mineral concentrate from mixtures of mineral grains.

New Minerals and Science.

ERIC Educational Resources Information Center

Birch, William D.

1997-01-01

Defines geodiversity, compares it to biodiversity, and discusses the mineral classification system. Charts the discovery of new minerals in Australia over time and focuses on uses of these minerals in technological advances. (DDR)

Is the Sky Falling? Grade Inflation and the Signaling Power of Grades

PubMed Central

Pattison, Evangeleen; Grodsky, Eric; Muller, Chandra

2014-01-01

Grades are the fundamental currency of our educational system; they signal academic achievement and non-cognitive skills to parents, employers, postsecondary gatekeepers, and students themselves. Grade inflation compromises the signaling value of grades, undermining their capacity to achieve the functions for which they are intended. We challenge the ‘increases in grade point average’ definition of grade inflation and argue that grade inflation must be understood in terms of the signaling power of grades. Analyzing data from four nationally representative samples, we find that in the decades following 1972: (a) grades have risen at high schools and dropped at four-year colleges, in general, and selective four-year institutions, in particular; and (b) the signaling power of grades has attenuated little, if at all. PMID:25288826

Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Middle and High School Age Groupings (Grades 7-12)

ERIC Educational Resources Information Center

Massachusetts Department of Elementary and Secondary Education, 2013

2013-01-01

The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

Massachusetts Early Warning Indicator System (EWIS). "Technical Descriptions of Risk Model Development": Early and Late Elementary Age Groupings (Grades 1-6)

ERIC Educational Resources Information Center

Massachusetts Department of Elementary and Secondary Education, 2013

2013-01-01

The Massachusetts Department of Elementary and Secondary Education (Department) created the grades 1-12 Early Warning Indicator System (EWIS) in response to district interest in the Early Warning Indicator Index (EWII) that the Department previously created for rising grade 9 students. Districts shared that the EWII data were helpful, but also…

Mineral transformations during the dissolution of uranium ore minerals by dissimilatory metal-reducing bacteria

NASA Astrophysics Data System (ADS)

Glasauer, S.; Weidler, P.; Fakra, S.; Tyliszczak, T.; Shuh, D.

2011-12-01

Carnotite minerals [X2(UO2)2(VO4)2]; X = K, Ca, Ba, Mn, Na, Cu or Pb] form the major ore of uranium in the Colorado Plateau. These deposits are highly oxidized and contain U(VI) and V(IV). The biotransformation of U(VI) bound in carnotite by bacteria during dissimilatory metal reduction presents a complex puzzle in mineral chemistry. Both U(VI) and V(V) can be respired by metal reducing bacteria, and the mineral structure can change depending on the associated counterion. We incubated anaerobic cultures of S. putrefaciens CN32 with natural carnotite minerals from southeastern Utah in a nutrient-limited defined medium. Strain CN32 is a gram negative bacterium and a terrestrial isolate from New Mexico. The mineral and metal transformations were compared to a system that contained similar concentrations of soluble U(VI) and V(V). Electron (SEM, TEM) microscopies and x-ray spectromicroscopy (STXM) were used in conjunction with XRD to track mineral changes, and bacterial survival was monitored throughout the incubations. Slow rates of metal reduction over 10 months for the treatment with carnotite minerals revealed distinct biotic and abiotic processes, providing insight on mineral transformation and bacteria-metal interactions. The bacteria existed as small flocs or individual cells attached to the mineral phase, but did not adsorb soluble U or V, and accumulated very little of the biominerals. Reduction of mineral V(V) necessarily led to a dismantling of the carnotite structure. Bioreduction of V(V) by CN32 contributed small but profound changes to the mineral system, resulting in new minerals. Abiotic cation exchange within the carnotite group minerals induced the rearrangement of the mineral structures, leading to further mineral transformation. In contrast, bacteria survival was poor for treatments with soluble U(VI) and V(V), although both metals were reduced completely and formed solid UO2 and VO2; we also detected V(III). For these treatments, the bacteria

Problems Relating to Examinations in Three-Year Technical/Natural Science Courses of Study at the Federal Armed Forces University, Munich.

ERIC Educational Resources Information Center

Ulbricht, Kurt; Zimmermann, Peter

1981-01-01

Problems encountered in testing in aerospace engineering courses in an accelerated technical program of a German military university are outlined. Four common grading procedures are compared, and the optimum length of written tests is discussed. (MSE)

Exploring Business & Marketing. Business Education BE 6208. Middle Grades Exploratory Vocational and Technical Education. Curriculum Guide.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

This curriculum guide for the middle grades contains materials for a 1-semester course that are designed to help students develop a useful career development plan, especially for those interested in the fields of business and marketing. The guide is organized into seven units that cover the following: (1) the world of business; (2) information…

Dissolution Rates and Mineral Lifetimes of Phosphate Containing Minerals and Implications for Mars

NASA Astrophysics Data System (ADS)

Adcock, C. T.; Hausrath, E.

2011-12-01

The objectives of NASA's Mars Exploration Program include exploring the planet's habitability and the possibility of past, present, or future life. This includes investigating "possible supplies of bioessential elements" [1]. Phosphate is one such bioessential element for life as we understand it. Phosphate is also abundant on Mars [2], and the phosphate rich minerals chlorapatite, fluorapatite, and merrillite have been observed in Martian meteorites [3]. Surface rock analyses from the MER Spirit also show the loss of a phosphate rich mineral from the rocks Wishstone and Watchtower at Gusev Crater [4,5], implying mineral dissolution. Dissolution rates of phosphate containing minerals are therefore important for characterizing phosphate mobility and bioavailability on Mars. Previous studies have measured dissolution rates of fluorapatite [6-8]. However, chlorapatite and merrillite (a non-terrestrial mineral similar to whitlockite) are more common phosphate minerals found in Martian meteorites [3], and few dissolution data exist for these minerals. We have begun batch dissolution experiments on chlorapatite, synthesized using methods of [9], and whitlockite, synthesized using a method modified from [10]. Additionally, we are dissolving Durango fluorapatite to compare to dissolution rates in literature, and natural Palermo whitlockite to compare to dissolution rates of our synthesized whitlockite. Batch dissolution experiments were performed after [8], using a 0.01 molar KNO3 solution with 0.1500g-0.3000g mineral powders and starting solution volumes of 180ml in LDPE reaction vessels. HNO3 or KOH were used to adjust initial pH as required. Dissolution rates are calculated from the rate of change of elemental concentration in solution as a function of time, and normalized to the mineral surface area as measured by BET. Resulting rates will be used to calculate mineral lifetimes for the different phosphate minerals under potential Mars-like aqueous conditions, and in

Bioleaching of serpentine group mineral by fungus Talaromyces flavus: application for mineral carbonation

NASA Astrophysics Data System (ADS)

Li, Z.; Lianwen, L.; Zhao, L.; Teng, H.

2011-12-01

Many studies of serpentine group mineral dissolution for mineral carbonation have been published in recent years. However, most of them focus mainly on either physical and chemical processes or on bacterial function, rather than fungal involvement in the bioleaching of serpentine group mineral. Due to the excessive costs of the magnesium dissolution process, finding a lower energy consumption method will be meaningful. A fungal strain Talaromyces flavus was isolated from serpentinic rock of Donghai (China). No study of its bioleaching ability is currently available. It is thus of great significance to explore the impact of T. flavus on the dissolution of serpentine group mineral. Serpentine rock-inhabiting fungi belonging to Acremonium, Alternaria, Aspergillus, Botryotinia, Cladosporium, Clavicipitaceae, Cosmospora, Fusarium, Monascus, Paecilomyces, Penicillium, Talaromyces, Trichoderma were isolated. These strains were chosen on the basis of resistance to magnesium and nickel characterized in terms of minimum inhibiting concentration (MIC). Specifically, the strain Talaromyces flavus has a high tolerance to both magnesium (1 mol/L) and nickel (10 mM/L), and we examine its bioleaching ability on serpentine group mineral. Contact and separation experiments (cut-off 8 000-14 000 Da), as well as three control experiments, were set up for 30 days. At least three repeated tests were performed for each individual experiment. The results of our experiments demonstrate that the bioleaching ability of T. flavus towards serpentine group mineral is evident. 39.39 wt% of magnesium was extracted from lizardite during the bioleaching period in the contact experiment, which showed a dissolution rate at about a constant 0.126 mM/d before reaching equilibrium in 13 days. The amount of solubilized Mg from chrysotile and antigorite were respectively 37.79 wt% and 29.78 wt% in the contact experiment. These results make clear the influence of mineral structure on mineral bioleaching

Blurred digital mammography images: an analysis of technical recall and observer detection performance.

PubMed

Ma, Wang Kei; Borgen, Rita; Kelly, Judith; Millington, Sara; Hilton, Beverley; Aspin, Rob; Lança, Carla; Hogg, Peter

2017-03-01

Blurred images in full-field digital mammography are a problem in the UK Breast Screening Programme. Technical recalls may be due to blurring not being seen on lower resolution monitors used for review. This study assesses the visual detection of blurring on a 2.3-MP monitor and a 5-MP report grade monitor and proposes an observer standard for the visual detection of blurring on a 5-MP reporting grade monitor. 28 observers assessed 120 images for blurring; 20 images had no blurring present, whereas 100 images had blurring imposed through mathematical simulation at 0.2, 0.4, 0.6, 0.8 and 1.0 mm levels of motion. Technical recall rate for both monitors and angular size at each level of motion were calculated. χ 2 tests were used to test whether significant differences in blurring detection existed between 2.3- and 5-MP monitors. The technical recall rate for 2.3- and 5-MP monitors are 20.3% and 9.1%, respectively. The angular size for 0.2- to 1-mm motion varied from 55 to 275 arc s. The minimum amount of motion for visual detection of blurring in this study is 0.4 mm. For 0.2-mm simulated motion, there was no significant difference [χ 2 (1, N = 1095) = 1.61, p = 0.20] in blurring detection between the 2.3- and 5-MP monitors. According to this study, monitors ≤2.3 MP are not suitable for technical review of full-field digital mammography images for the detection of blur. Advances in knowledge: This research proposes the first observer standard for the visual detection of blurring.

Blurred digital mammography images: an analysis of technical recall and observer detection performance

PubMed Central

Borgen, Rita; Kelly, Judith; Millington, Sara; Hilton, Beverley; Aspin, Rob; Lança, Carla; Hogg, Peter

2017-01-01

Objective: Blurred images in full-field digital mammography are a problem in the UK Breast Screening Programme. Technical recalls may be due to blurring not being seen on lower resolution monitors used for review. This study assesses the visual detection of blurring on a 2.3-MP monitor and a 5-MP report grade monitor and proposes an observer standard for the visual detection of blurring on a 5-MP reporting grade monitor. Methods: 28 observers assessed 120 images for blurring; 20 images had no blurring present, whereas 100 images had blurring imposed through mathematical simulation at 0.2, 0.4, 0.6, 0.8 and 1.0 mm levels of motion. Technical recall rate for both monitors and angular size at each level of motion were calculated. χ2 tests were used to test whether significant differences in blurring detection existed between 2.3- and 5-MP monitors. Results: The technical recall rate for 2.3- and 5-MP monitors are 20.3% and 9.1%, respectively. The angular size for 0.2- to 1-mm motion varied from 55 to 275 arc s. The minimum amount of motion for visual detection of blurring in this study is 0.4 mm. For 0.2-mm simulated motion, there was no significant difference [χ2 (1, N = 1095) = 1.61, p = 0.20] in blurring detection between the 2.3- and 5-MP monitors. Conclusion: According to this study, monitors ≤2.3 MP are not suitable for technical review of full-field digital mammography images for the detection of blur. Advances in knowledge: This research proposes the first observer standard for the visual detection of blurring. PMID:28134567

Effect of soil metal contamination on glyphosate mineralization: role of zinc in the mineralization rates of two copper-spiked mineral soils.

PubMed

Kim, Bojeong; Kim, Young Sik; Kim, Bo Min; Hay, Anthony G; McBride, Murray B

2011-03-01

A systematic investigation into lowered degradation rates of glyphosate in metal-contaminated soils was performed by measuring mineralization of [(14)C]glyphosate to (14)CO(2) in two mineral soils that had been spiked with Cu and/or Zn at various loadings. Cumulative (14)CO(2) release was estimated to be approximately 6% or less of the amount of [(14)C]glyphosate originally added in both soils over an 80-d incubation. For all but the highest Cu treatments (400 mg kg(-1)) in the coarse-textured Arkport soil, mineralization began without a lag phase and declined over time. No inhibition of mineralization was observed for Zn up to 400 mg kg(-1) in either soil, suggesting differential sensitivity of glyphosate mineralization to the types of metal and soil. Interestingly, Zn appeared to alleviate high-Cu inhibition of mineralization in the Arkport soil. The protective role of Zn against Cu toxicity was also observed in the pure culture study with Pseudomonas aeruginosa, suggesting that increased mineralization rates in high Cu soil with Zn additions might have been due to alleviation of cellular toxicity by Zn rather than a mineralization specific mechanism. Extensive use of glyphosate combined with its reduced degradation in Cu-contaminated, coarse-textured soils may increase glyphosate persistence in soil and consequently facilitate Cu and glyphosate mobilization in the soil environment. Copyright © 2010 SETAC.

Predicting bone mineral acquisition during puberty: data from a 3-year follow-up study in Hamamatsu, Japan.

PubMed

Kouda, Katsuyasu; Ohara, Kumiko; Nakamura, Harunobu; Fujita, Yuki; Iki, Masayuki

2017-03-01

Although most adult bone mass is acquired before adolescence, only a few studies have assessed bone turnover markers in children. Thus, the utility of bone markers to evaluate and predict bone mineral accrual in children is unclear. The present study assessed the association between serum bone markers at 11 years of age and subsequent changes in bone gain. Information on bone minerals and bone markers at baseline and at the 3-year follow-up were obtained from 121 children who registered as fifth-grade students in 2010, in Hamamatsu, Japan. Whole-body bone mineral content (WBBMC) and whole-body bone mineral density (WBBMD) were measured using dual-energy X-ray absorptiometry. Boys showed significant (P < 0.05) positive relationships between intact osteocalcin at baseline and WBBMC at follow-up (β = 0.24), between tartrate-resistant acid phosphatase isoenzyme 5b (TRAP5b) and WBBMC (β = 0.34), and between TRAP5b and WBBMD (β = 0.34), after adjusting for potential confounding factors. In girls, adjusted means of 3-year gain in both WBBMC and WBBMD significantly increased from the lowest to highest quartiles of type 1 collagen cross-linked C-terminal telopeptide. In boys, adjusted means of 3-year gain in both WBBMC and WBBMD significantly increased from the lowest to highest quartiles of TRAP5b. Children with a high concentration of bone turnover markers tended to exhibit substantial accrual of bone minerals. These results suggest that serum levels of circulating biomarkers at age 11 predict subsequent bone mineral accrual.

Systemic effect of mineral aggregate-based cements: histopathological analysis in rats

PubMed Central

Garcia, Lucas da Fonseca Roberti; Huck, Claudia; Magalhães, Fernando Augusto Cintra; de Souza, Pedro Paulo Chaves; de Souza Costa, Carlos Alberto

2017-01-01

Abstract Objective: Several studies reported the local tissue reaction caused by mineral aggregate-based cements. However, few studies have investigated the systemic effects promoted by these cements on liver and kidney when directly applied to connective tissue. The purpose of this in vivo study was to investigate the systemic effect of mineral aggregate-based cements on the livers and kidneys of rats. Material and Methods: Samples of Mineral Trioxide Aggregate (MTA) and a calcium aluminate-based cement (EndoBinder) containing different radiopacifiers were implanted into the dorsum of 40 rats. After 7 and 30 d, samples of subcutaneous, liver and kidney tissues were submitted to histopathological analysis. A score (0-3) was used to grade the inflammatory reaction. Blood samples were collected to evaluate changes in hepatic and renal functions of animals. Results: The moderate inflammatory reaction (2) observed for 7 d in the subcutaneous tissue decreased with time for all cements. The thickness of inflammatory capsules also presented a significant decrease with time (P<.05). Systemically, all cements caused adverse inflammatory reactions in the liver and kidney, being more evident for MTA, persisting until the end of the analysis. Liver functions increased significantly for MTA during 30 d (P<.05). Conclusion: The different cements induced to a locally limited inflammatory reaction. However, from the systemic point of view, the cements promoted significant inflammatory reactions in the liver and kidney. For MTA, the reactions were more accentuated. PMID:29211283

Mineral and energy resources of the Roswell Resource Area, East-Central New Mexico

USGS Publications Warehouse

Bartsch-Winkler, Susan B.; Donatich, Alessandro J.

1995-01-01

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari Basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-Valley-type lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called 'Pecos diamonds' and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, carbon dioxide, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, and clay. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum-group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver-tellurium veins, and thorium-rare-earth veins. Museum-quality quartz crystals are associated with Tertiary intrusive rocks. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and occurrences of silver and uranium. Important industrial

Joint simulation of stationary grade and non-stationary rock type for quantifying geological uncertainty in a copper deposit

NASA Astrophysics Data System (ADS)

Maleki, Mohammad; Emery, Xavier

2017-12-01

In mineral resources evaluation, the joint simulation of a quantitative variable, such as a metal grade, and a categorical variable, such as a rock type, is challenging when one wants to reproduce spatial trends of the rock type domains, a feature that makes a stationarity assumption questionable. To address this problem, this work presents methodological and practical proposals for jointly simulating a grade and a rock type, when the former is represented by the transform of a stationary Gaussian random field and the latter is obtained by truncating an intrinsic random field of order k with Gaussian generalized increments. The proposals concern both the inference of the model parameters and the construction of realizations conditioned to existing data. The main difficulty is the identification of the spatial correlation structure, for which a semi-automated algorithm is designed, based on a least squares fitting of the data-to-data indicator covariances and grade-indicator cross-covariances. The proposed models and algorithms are applied to jointly simulate the copper grade and the rock type in a Chilean porphyry copper deposit. The results show their ability to reproduce the gradual transitions of the grade when crossing a rock type boundary, as well as the spatial zonation of the rock type.

Mineral Surface Rearrangement at High Temperatures: Implications for Extraterrestrial Mineral Grain Reactivity.

PubMed

King, Helen E; Plümper, Oliver; Putnis, Christine V; O'Neill, Hugh St C; Klemme, Stephan; Putnis, Andrew

2017-04-20

Mineral surfaces play a critical role in the solar nebula as a catalytic surface for chemical reactions and potentially acted as a source of water during Earth's accretion by the adsorption of water molecules to the surface of interplanetary dust particles. However, nothing is known about how mineral surfaces respond to short-lived thermal fluctuations that are below the melting temperature of the mineral. Here we show that mineral surfaces react and rearrange within minutes to changes in their local environment despite being far below their melting temperature. Polished surfaces of the rock and planetary dust-forming silicate mineral olivine ((Mg,Fe) 2 SiO 4 ) show significant surface reorganization textures upon rapid heating resulting in surface features up to 40 nm in height observed after annealing at 1200 °C. Thus, high-temperature fluctuations should provide new and highly reactive sites for chemical reactions on nebula mineral particles. Our results also may help to explain discrepancies between short and long diffusion profiles in experiments where diffusion length scales are of the order of 100 nm or less.

Cross-Validation of easyCBM Reading Cut Scores in Washington: 2009-2010. Technical Report #1109

ERIC Educational Resources Information Center

Irvin, P. Shawn; Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Washington state. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 900 students per grade, randomly split into two…

Cross-Validation of easyCBM Reading Cut Scores in Oregon: 2009-2010. Technical Report #1108

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Oregon. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 2,000 students per grade, randomly split into two groups of…

Correlation between magnetic susceptibility and mineral species along NWA-1 well, southern Tunisia: An overlap of the depositional environment, the climate, and the diagenesis

NASA Astrophysics Data System (ADS)

Mefteh, Samir; Essefi, Elhoucine; Yaich, Chokri; Jamoussi, Fakher; Medhioub, Mounir

2015-03-01

In order to distinguish the effects of diagenesis, the climate and the depositional environment, the magnetic properties were correlated with some minerals along the NWA-1 well, which crosses the southern subsurface from Cretaceous to Silurian successions. The MS along NWA-1 well shows major picks probably indicating a dramatic change of geochemical and mineralogical composition. Minor picks may be attributed to diagenetic transformations affecting some minerals. The mineralogical analysis shows the presence of illite, kaolinite with some traces of chlorite and smectite. Quartz, calcite, white feldspar, anorthite, dolomite, gypsum and pyrite are identified as associated minerals. The PCA of the different minerals and the magnetic susceptibility shows three different heterogeneous populations. In these populations, the traditional classification of magnetic minerals is not respected. For instance, diamagnetic minerals are positively correlated with MS. This correlation is through indirect causal relation extrapolating the temperature caused by the burial diagenesis. The aim is not totally reached because the handicap is twofold. The XRD diffraction is not able to identify the low amounts of magnetic minerals and the primary mineralogy and magnetic properties are radically modified by post-depositional processes. At the productive well of NWA-1, this overlap is further complicated by hydrocarbons, low grade metamorphism and remagnetization modifying the original magnetic signal.

Tectonic evolution of the Gaoua region, Burkina Faso: Implications for mineralization

NASA Astrophysics Data System (ADS)

Baratoux, L.; Metelka, V.; Naba, S.; Ouiya, P.; Siebenaller, L.; Jessell, M. W.; Naré, A.; Salvi, S.; Béziat, D.; Franceschi, G.

2015-12-01

The interpretation of high-resolution airborne geophysical data integrated with field structural and lithological observations were employed in the creation of a litho-structural framework for the Gaoua region, Burkina Faso. The granite-greenstone domain of Paleoproterozoic age was affected by multiple deformation and mineralization events. The early tectonic phase is characterized by the emplacement of voluminous tholeiitic and calc-alkaline lavas, probably in a volcanic arc setting. The copper mineralization in Gongondy, Dienemera and Mt Biri is concentrated in a diorite/andesite breccia, and is interpreted as porphyry-copper style formed at an early stage of the evolution of the area. Evidence for the first deformation event D1Ga corresponding to N-S shortening was only found in the E-W trending mafic unit bordering the Gaoua batholith to the south. A second deformation phase D2Ga occurred under greenschist facies conditions and lead to a development of more or less penetrative metamorphic foliation and its subsequent folding under overall E-W compression. At later stages, the D2Ga switched to a transcurrent regime characterized by intense N-S to NW-trending steeply dipping shear zones. The first significant gold mineralization event is related to this transcurrent tectonic phase. During subsequent D3Ga, intense network of brittle to brittle-ductile NW and NE faults developed. Economic gold concentrations are attributed to the D3Ga event and are associated with the remobilization of early disseminated low grade gold concentrations. Significant deposits in the area are Nassara, Gomblora, Batié West and Kampti. The last deformation event D4Ga resulted in E-W trending thrust faults and crenulation cleavage planes, under overall N-S compression. No mineralization events related to this stage have been seen.

An Analysis of Fifth-Grade Students' Performance When Solving Selected Open Distributive Sentences. Technical Report No. 397.

ERIC Educational Resources Information Center

Hobbs, Charles Eugene

The author investigates elementary school students' performance when solving selected open distributive sentences in relation to three factors (Open Sentence Type, Context, Number Size) and identifies and classifies solution methods attempted by students and students' errors in performance. Eighty fifth-grade students participated in the…

Rapid toluene mineralization by aquifer microorganisms at Adak, Alaska: Implications for intrinsic bioremediation in cold environments

USGS Publications Warehouse

Bradley, P.M.; Chapelle, F.H.

1995-01-01

Sediments from a relatively cold (5??C), petroleum hydrocarbon-contaminated aquifer in Adak, AK, mineralized [14C]toluene at an aerobic rate (16.3% day-1 at 5??C) comparable to that (5.1% day-1 at 20??C) of sediments from a more temperate aquifer at Hanahan, SC. In addition, rates of overall microbial metabolism in sediments from the two aquifers, as estimated by [1 -14C]acetate mineralization, were similar (???10.6% h-1) at their respective in situ temperatures. These results are not consistent with the common assumption that biodegradation rates in cold ground-water systems are depressed relative to more temperate systems. Furthermore, these results suggest that intrinsic bioremediation of petroleum hydrocarbon contaminants in cold groundwater systems may be technically feasible, in some cases.

Evaluation of trace mineral source and preharvest deletion of trace minerals from finishing diets on tissue mineral status in pigs

PubMed Central

Ma, Y. L.; Webb, S. F.; Rentfrow, G.

2018-01-01

Objective An experiment was conducted to evaluate dietary supplemental trace mineral source and deletion on mineral content in tissues. Methods Weanling crossbred pigs (n = 144; 72 barrows and 72 gilts; body weight [BW] = 7.4±1.05 kg) were used. A basal diet was prepared, and trace mineral premix containing either inorganic (ITM) or organic (OTM) trace minerals (Cu, Fe, Mn, and Zn) was added to the basal diet. Pigs were blocked by sex and BW and randomly allotted to 24 pens for a total of 6 pigs per pen, and fed a diet containing either ITM or OTM supplemented at the 1998 NRC requirement estimates for each of 5 BW phases (Phase I to V) from 7 to 120 kg. The trace mineral supplementation was deleted for 6, 4, 2, and 0 wk of Phase V; regarding nutrient adequacy during this phase, the indigenous dietary Fe and Mn was sufficient, Cu was marginal and Zn was deficient. Results At the end of Phase IV, Mn content (mg/kg on the dry matter basis) was greater (p<0.05) in heart (0.77 vs 0.68), kidney (6.32 vs 5.87), liver (9.46 vs 8.30), and longissimus dorsi (LD; 0.30 vs 0.23) of pigs fed OTM. The pigs fed OTM were greater (p<0.05) in LD Cu (2.12 vs 1.89) and Fe (21.75 vs 19.40) and metacarpal bone Zn (141.86 vs 130.05). At the end of Phase V, increased length of deletion period (from 0 to 6 wk) resulted in a decrease (linear, p<0.01) in liver Zn (196.5 to 121.8), metacarpal bone Zn (146.6 to 86.2) and an increase (linear, p<0.01) in heart Mn (0.70 to 1.08), liver Mn (7.74 to 12.96), and kidney Mn (5.58 to 7.56). The only mineral source by deletion period interaction (p<0.05) was observed in LD Zn. Conclusion The results demonstrated differential effects of mineral deletion on tissue mineral content depending on both mineral assessed and source of the mineral. PMID:28728408

The life cycle of a mineral deposit: a teacher's guide for hands-on mineral education activities

USGS Publications Warehouse

Frank, Dave; Galloway, John; Assmus, Ken

2005-01-01

This teacher's guide defines what a mineral deposit is and how a mineral deposit is identified and measured, how the mineral resources are extracted, and how the mining site is reclaimed; how minerals and mineral resources are processed; and how we use mineral resources in our every day lives. Included are 10 activitybased learning exercises that educate students on basic geologic concepts; the processes of finding, identifying, and extracting the resources from a mineral deposit; and the uses of minerals. The guide is intended for K through 12 Earth science teachers and students and is designed to meet the National Science Content Standards as defined by the National Research Council (1996). To assist in the understanding of some of the geology and mineral terms, see the Glossary (appendix 1) and Minerals and Their Uses (appendix 2). The process of finding or exploring for a mineral deposit, extracting or mining the resource, recovering the resource, also known as beneficiation, and reclaiming the land mined can be described as the “life cycle” of a mineral deposit. The complete process is time consuming and expensive, requiring the use of modern technology and equipment, and may take many years to complete. Sometimes one entity or company completes the entire process from discovery to reclamation, but often it requires multiple groups with specialized experience working together. Mineral deposits are the source of many important commodities, such as copper and gold, used by our society, but it is important to realize that mineral deposits are a nonrenewable resource. Once mined, they are exhausted, and another source must be found. New mineral deposits are being continuously created by the Earth but may take millions of years to form. Mineral deposits differ from renewable resources, such as agricultural and timber products, which may be replenished within a few months to several years.

Lumber Grade Yields for Graded Aspen Logs and Trees

Treesearch

Leland F. Hanks; Robert L. Brisbin

1978-01-01

Green lumber grade yields for aspen were determined for use with the U.S. Forest Service hardwood log and tree grades. The yields for logs are expressed in percent of total lumber tally volume, and those for trees are expressed in board feet. Overruns for the International 1/4-inch and Scribner log rules along with lumber recovery factors are shown by log grade.

An Inexpensive Way of Teaching Uncertainty and Mineral Exploration Drilling in the Classroom

NASA Astrophysics Data System (ADS)

Aquino, J. S.

2014-12-01

This presentation is all about inexpensive ways of teaching uncertainty and mineral exploration drilling in the classroom. These labs were developed as an off-shoot of my years of mineral industry experience before I transitioned to geoscience education. I have developed several classroom lab exercises that relate to the role of modeling, uncertainty and prediction in mineral exploration. These lessons are mostly less expensive ($<5/group) hands-on activities that can be differentiated across grade levels. Early in the semester, modeling is explored through the cube and toilet paper roll puzzle lab. This is then immediately followed by the penny experiment that gives a physical meaning to the concept of uncertainty. However, it is the end-of-semester shoebox drilling lab that serves as the culminating activity for modeling, uncertainty and prediction. An object (orebody) is hidden inside a shoebox and the students are challenged to design a drilling program to predict the location and topology of a "mineral deposit". The students' decision on the location of the first few drill holes will be based on how they analyze, synthesize and evaluate simple surface topographic, geologic and geochemical +/- geophysical data overlain on top of the box. Before drilling, students are required to construct several geologic sections that will "model" the shape of the hidden orebody. Using bamboo skewers as their drilling equipment, students then commence their drilling and along the way learn the importance of drill spacing in decreasing uncertainty or increasing confidence. Lastly, the mineral separation lab gives them an opportunity to design another experiment that mimics mineral processing and learns a valuable lesson on the difficulties in recovery and how it relates to entropy (no such thing as 100% recoverability). The last two labs can be further enhanced with economic analysis through incorporation of drilling and processing costs. Students further appreciate the world

Teachers' Grading Decision Making

ERIC Educational Resources Information Center

Isnawati, Ida; Saukah, Ali

2017-01-01

This study investigated teachers' grading decision making, focusing on their beliefs underlying their grading decision making, their grading practices and assessment types, and factors they considered in grading decision making. Two teachers from two junior high schools applying different curriculum policies in grade reporting in Indonesian…

Mineral Commodity Summaries 2008

USGS Publications Warehouse

,

2008-01-01

Each chapter of the 2008 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2007 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals

Minerals yearbook: Mineral industries of Europe and central Eurasia. Volume 3. 1992 international review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-01-01

Volume III, Minerals Yearbook -- International Review contains the latest available mineral data on more than 175 foreign countries and discusses the importance of minerals to the economies of these nations. Since the 1989 International Review, the volume has been presented as six reports. The report presents the Mineral Industries of Europe and Central Eurasia. The report incorporates location maps, industry structure tables, and an outlook section previously incorporated in the authors' Minerals Perspectives Series quinquennial regional books, which are being discontinued. This section of the Minerals Yearbook reviews the minerals industries of 45 countries: the 12 nations of themore » European Community (EC); 6 of the 7 nations of the European Free Trade Association (EFTA); Malta; the 11 Eastern European economies in transition (Albania, Bosnia and Hercegovina, Bulgaria, Croatia, Czechoslovakia, Hungary, Macedonia, Poland, Romania, Serbia and Montenegro, and Slovenia); and the countries of Central Eurasia (Armenia, Azerbaijan, Belarus, Estonia, Georgia, Kazakhstan, Kyrgystan, Latvia, Lithuania, Moldova, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan).« less

The Grades Transfer from One Grading Scale to Other Algorithmization

ERIC Educational Resources Information Center

Lieponiene, Jurgita; Kulvietiene, Regina

2011-01-01

The article presents the consideration of grading scales used for education outcomes in different countries, describes likeness and differences of applied grading scales. Application of the European Credit Transfer and Accumulation System (ECTS) grading scale is investigated according of the analysis of scientific literature as well as cases of…

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUCHANAN, J.R.

2000-05-16

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate.

43 CFR 3594.5 - Minerals soluble in water; brines; minerals taken in solution.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Minerals soluble in water; brines; minerals taken in solution. 3594.5 Section 3594.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) SOLID...

43 CFR 3594.5 - Minerals soluble in water; brines; minerals taken in solution.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Minerals soluble in water; brines; minerals taken in solution. 3594.5 Section 3594.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) SOLID...

43 CFR 3594.5 - Minerals soluble in water; brines; minerals taken in solution.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Minerals soluble in water; brines; minerals taken in solution. 3594.5 Section 3594.5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) SOLID...

Alaska Geochemical Database - Mineral Exploration Tool for the 21st Century - PDF of presentation

USGS Publications Warehouse

Granitto, Matthew; Schmidt, Jeanine M.; Labay, Keith A.; Shew, Nora B.; Gamble, Bruce M.

2012-01-01

The U.S. Geological Survey has created a geochemical database of geologic material samples collected in Alaska. This database is readily accessible to anyone with access to the Internet. Designed as a tool for mineral or environmental assessment, land management, or mineral exploration, the initial version of the Alaska Geochemical Database - U.S. Geological Survey Data Series 637 - contains geochemical, geologic, and geospatial data for 264,158 samples collected from 1962-2009: 108,909 rock samples; 92,701 sediment samples; 48,209 heavy-mineral-concentrate samples; 6,869 soil samples; and 7,470 mineral samples. In addition, the Alaska Geochemical Database contains mineralogic data for 18,138 nonmagnetic-fraction heavy mineral concentrates, making it the first U.S. Geological Survey database of this scope that contains both geochemical and mineralogic data. Examples from the Alaska Range will illustrate potential uses of the Alaska Geochemical Database in mineral exploration. Data from the Alaska Geochemical Database have been extensively checked for accuracy of sample media description, sample site location, and analytical method using U.S. Geological Survey sample-submittal archives and U.S. Geological Survey publications (plus field notebooks and sample site compilation base maps from the Alaska Technical Data Unit in Anchorage, Alaska). The database is also the repository for nearly all previously released U.S. Geological Survey Alaska geochemical datasets. Although the Alaska Geochemical Database is a fully relational database in Microsoft® Access 2003 and 2010 formats, these same data are also provided as a series of spreadsheet files in Microsoft® Excel 2003 and 2010 formats, and as ASCII text files. A DVD version of the Alaska Geochemical Database was released in October 2011, as U.S. Geological Survey Data Series 637, and data downloads are available at http://pubs.usgs.gov/ds/637/. Also, all Alaska Geochemical Database data have been incorporated into

Geological modelling of mineral deposits for prediction in mining

NASA Astrophysics Data System (ADS)

Sides, E. J.

Accurate prediction of the shape, location, size and properties of the solid rock materials to be extracted during mining is essential for reliable technical and financial planning. This is achieved through geological modelling of the three-dimensional (3D) shape and properties of the materials present in mineral deposits, and the presentation of results in a form which is accessible to mine planning engineers. In recent years the application of interactive graphics software, offering 3D database handling, modelling and visualisation, has greatly enhanced the options available for predicting the subsurface limits and characteristics of mineral deposits. A review of conventional 3D geological interpretation methods, and the model struc- tures and modelling methods used in reserve estimation and mine planning software packages, illustrates the importance of such approaches in the modern mining industry. Despite the widespread introduction and acceptance of computer hardware and software in mining applications, in recent years, there has been little fundamental change in the way in which geology is used in orebody modelling for predictive purposes. Selected areas of current research, aimed at tackling issues such as the use of orientation data, quantification of morphological differences, incorporation of geological age relationships, multi-resolution models and the application of virtual reality hardware and software, are discussed.

Developing a molecular picture of soil organic matter–mineral interactions by quantifying organo–mineral binding

DOE PAGES

Newcomb, C. J.; Qafoku, N. P.; Grate, J. W.; ...

2017-08-30

Long residence times of soil organic matter have been attributed to reactive mineral surface sites that sorb organic species and cause inaccessibility due to isolation and chemical stabilization at the organic-mineral interface. Instrumentation for probing this interface is limited. As a result, much of the micron- and molecular-scale knowledge about organic-mineral interactions remains largely qualitative. We report the use of force spectroscopy to directly measure the binding between organic ligands with known chemical functionalities to soil minerals in aqueous environments. By systematically studying the role of organic functional group chemistry with model minerals, we demonstrate that the chemistry of bothmore » the organic ligand and mineral contribute to values of binding free energy and that changes in pH and ionic strength produce significant differences in binding energies. These direct measurements of molecular binding provide mechanistic insights into organo-mineral interactions, which could potentially inform land-carbon models that explicitly include mineral-bound C pools.« less

Developing a molecular picture of soil organic matter–mineral interactions by quantifying organo–mineral binding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newcomb, C. J.; Qafoku, N. P.; Grate, J. W.

Long residence times of soil organic matter have been attributed to reactive mineral surface sites that sorb organic species and cause inaccessibility due to isolation and chemical stabilization at the organic-mineral interface. Instrumentation for probing this interface is limited. As a result, much of the micron- and molecular-scale knowledge about organic-mineral interactions remains largely qualitative. We report the use of force spectroscopy to directly measure the binding between organic ligands with known chemical functionalities to soil minerals in aqueous environments. By systematically studying the role of organic functional group chemistry with model minerals, we demonstrate that the chemistry of bothmore » the organic ligand and mineral contribute to values of binding free energy and that changes in pH and ionic strength produce significant differences in binding energies. These direct measurements of molecular binding provide mechanistic insights into organo-mineral interactions, which could potentially inform land-carbon models that explicitly include mineral-bound C pools.« less

Bartering for Minerals.

ERIC Educational Resources Information Center

May, Kathie

2002-01-01

Presents an activity in which students are assigned occupations that rely on specific minerals. To obtain the needed minerals, students learn how to trade services and commodities. Includes details on preparation, modeling behaviors, and printed materials. (DDR)

Physicochemical characterization of mineral (iron/zinc) bound caseinate and their mineral uptake in Caco-2 cells.

PubMed

Shilpashree, B G; Arora, Sumit; Kapila, Suman; Sharma, Vivek

2018-08-15

Milk proteins (especially caseins) are widely accepted as good vehicle for the delivery of various bioactive compounds including minerals. Succinylation is one of the most acceptable chemical modification techniques to enhance the mineral binding ability of caseins. Addition of minerals to succinylated proteins may alter their physicochemical and biochemical properties. Physicochemical characteristics of succinylated sodium caseinate (S.NaCN)-mineral (iron/zinc) complexes were elucidated. Chromatographic behaviour and fluorescence intensity confirmed the structural modification of S.NaCN upon binding with minerals. The bound mineral from protein complexes showed significantly higher (P < 0.05) in vitro bioavailability (mineral uptake) than mineral salts in Caco-2 cells. Also, iron bound S.NaCN showed higher cellular ferritin formation than iron in its free form. These mineral bound protein complexes with improved bioavailability could safely replace inorganic fortificants in various functional food formulations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Geology of the Ivanhoe Hg-Au district, northern Nevada: Influence of Miocene volcanism, lakes, and active faulting on epithermal mineralization

USGS Publications Warehouse

Wallace, A.R.

2003-01-01

The mercury-gold deposits of the Ivanhoe mining district in northern Nevada formed when middle Miocene rhyolitic volcanism and high-angle faulting disrupted a shallow lacustrine environment. Sinter and replacement mercury deposits formed at and near the paleosurface, and disseminated gold deposits and high-grade gold-silver veins formed beneath the hot spring deposits. The lacustrine environment provided abundant meteoric water; the rhyolites heated the water; and the faults, flow units, and lakebeds provided fluid pathways for the hydrothermal fluids. A shallow lake began to develop in the Ivanhoe area about 16.5 Ma. The lake progressively expanded and covered the entire area with fine-grained lacustrine sediments. Lacustrine sedimentation continued to at least 14.4 Ma, and periodic fluctuations in the size and extent of the lake may have been responses to both climate and nearby volcanism. The eruption of rhyolite and andesite flows and domes periodically disrupted the lacustrine environment and produced interfingered flows and lake sediments. The major pulse of rhyolitic volcanism took place between 15.16 ± 0.05 and 14.92 ± 0.05 Ma. High-angle faulting began in the basement about 15.2 Ma, penetrated to and disrupted the paleosurface after 15.10 ± 0.06 Ma, and largely ceased by 14.92 ± 0.05 Ma. Ground motion related to both faulting and volcanism created debris flows and soft-sediment deformation in the lakebeds. Mercury-gold mineralization was coeval with rhyolite volcanism and high-angle faulting, and it took place about 15.2 to 14.9 Ma. At and near the paleosurface, hydrothermal fluids migrated through tuffaceous sediments above relatively impermeable volcanic and Paleozoic units, creating chalcedonic, cinnabar-bearing replacement bodies and sinters. Disseminated gold was deposited in sedimentary and volcanic rocks beneath the mercury deposits, although the hydrologic path between the two ore types is unclear. Higher-grade gold-silver deposits formed in

Measuring the Hardness of Minerals

ERIC Educational Resources Information Center

Bushby, Jessica

2005-01-01

The author discusses Moh's hardness scale, a comparative scale for minerals, whereby the softest mineral (talc) is placed at 1 and the hardest mineral (diamond) is placed at 10, with all other minerals ordered in between, according to their hardness. Development history of the scale is outlined, as well as a description of how the scale is used…

Audit of nuclear medicine scientific and technical standards.

PubMed

Jarritt, Peter H; Perkins, Alan C; Woods, Sandra D

2004-08-01

The British Nuclear Medicine Society has developed a process for the service-specific organizational audit of nuclear medicine departments. This process identified the need for a scheme suitable for the audit of the scientific and technical standards of a department providing such a service. This document has evolved following audit visits of a number of UK departments. It is intended to be used as a written document to facilitate the audit procedure and may be used for both external and self-audit purposes. Scientific and technical standards have been derived from a number of sources, including regulatory documents, notes for guidance and peer-reviewed publications. The audit scheme is presented as a series of questions with responses graded according to legal and safety obligations (A), good practice (B) and desirable aspects of service delivery (C). This document should be regarded as part of an audit framework and should be kept under review as the process evolves to meet the future demands of this high-technology-based clinical service.

Mineral Fiber Toxicology

EPA Science Inventory

The chemical and physical properties of different forms of mineral fibers impact biopersistence and pathology in the lung. Fiber chemistry, length, aspect ratio, surface area and dose are critical factors determining mineral fiber-associated health effects including cancer and as...

Modeling CO2-Water-Mineral Wettability and Mineralization for Carbon Geosequestration.

PubMed

Liang, Yunfeng; Tsuji, Shinya; Jia, Jihui; Tsuji, Takeshi; Matsuoka, Toshifumi

2017-07-18

Carbon dioxide (CO 2 ) capture and storage (CCS) is an important climate change mitigation option along with improved energy efficiency, renewable energy, and nuclear energy. CO 2 geosequestration, that is, to store CO 2 under the subsurface of Earth, is feasible because the world's sedimentary basins have high capacity and are often located in the same region of the world as emission sources. How CO 2 interacts with the connate water and minerals is the focus of this Account. There are four trapping mechanisms that keep CO 2 in the pores of subsurface rocks: (1) structural trapping, (2) residual trapping, (3) dissolution trapping, and (4) mineral trapping. The first two are dominated by capillary action, where wettability controls CO 2 and water two-phase flow in porous media. We review state-of-the-art studies on CO 2 /water/mineral wettability, which was found to depend on pressure and temperature conditions, salt concentration in aqueous solutions, mineral surface chemistry, and geometry. We then review some recent advances in mineral trapping. First, we show that it is possible to reproduce the CO 2 /water/mineral wettability at a wide range of pressures using molecular dynamics (MD) simulations. As the pressure increases, CO 2 gas transforms into a supercritical fluid or liquid at ∼7.4 MPa depending on the environmental temperature. This transition leads to a substantial decrease of the interfacial tension between CO 2 and reservoir brine (or pure water). However, the wettability of CO 2 /water/rock systems depends on the type of rock surface. Recently, we investigated the contact angle of CO 2 /water/silica systems with two different silica surfaces using MD simulations. We found that contact angle increased with pressure for the hydrophobic (siloxane) surface while it was almost constant for the hydrophilic (silanol) surface, in excellent agreement with experimental observations. Furthermore, we found that the CO 2 thin films at the CO 2 -hydrophilic

Mineral resources of Novokuznetsk administrative district of Kemerovo region (metallic and non-metallic minerals)

NASA Astrophysics Data System (ADS)

Gutak, Ja M.

2017-09-01

The article summarizes data on metallic and non-metallic minerals of Novokuznetsk district of Kemerovo region. Consistently reviewed are iron deposits (Tersinskaya group of deposits), gold deposits (placer accumulations and vein gold deposits), mineral water deposits (Tersinskoe deposit), deposit of refractory clay (Barkinskoe) and wide spread mineral deposits such as brick clay, keramzite materials, sand and gravel, building stones, ornamental stones, facing stones, peat, materials for lime production. It is indicated that resource base of metallic and nonmetallic minerals is inferior to that of mineral coal. At the same time it can be of considerable interest to small and medium-size businesses as objects with quick return of investment (facing and ornamental stones). For a number of wide spread mineral resources (brick clay, keramzite materials, sand and gravel) it is an important component of local industry.

Construction-grade plywood from grade 3 Appalachian oak

Treesearch

E. Paul Craft; E. Paul Craft

1970-01-01

In an effort to find a use for a large volume of the low-grade oak logs of Appalachia, we processed a sample of these logs in a typical southern-pine sheathing plant and determined the feasibility of converting them into construction grade plywood.

Criterion Validity Evidence for the easyCBM© CCSS Math Measures: Grades 6-8. Technical Report #1402

ERIC Educational Resources Information Center

Anderson, Daniel; Rowley, Brock; Alonzo, Julie; Tindal, Gerald

2012-01-01

The easyCBM© CCSS Math tests were developed to help inform teachers' instructional decisions by providing relevant information on students' mathematical skills, relative to the Common Core State Standards (CCSS). This technical report describes a study to explore the validity of the easyCBM© CCSS Math tests by evaluating the relation between…

Making the Grade.

ERIC Educational Resources Information Center

Dahlgren, Sally

2000-01-01

Explains the importance of choosing wood flooring for athletic facilities and why the grade of wood specified can significantly impact sports-facility aesthetics. The three types of wood grades are explained along with thoughts on why choosing the priciest grade may not be satisfactory. (GR)

The mineral resource potential of the Harrat Nawasif, sheet 21/42 C, Ranyah, sheet 21/42 D, and Jabal Dalfa, sheet 21/43 C quadrangles, Kingdom of Saudi Arabia

USGS Publications Warehouse

Fenton, Michael D.

1983-01-01

Areas with mineral resource potential in the Harrat Nawasif, Ranyah, and Jabal Dalfa quadrangles in the central Precambrian Shield of Saudi Arabia have been identified by reconnaissance rock geochemistry and inspection of ancient prospects. Locally anomalous areas in perthitic, alkalic granite terrane in the Ranyah quadrangle possibly contain niobium, zirconium, thorium, fluorite, rare-earth, tin, molybdenum, or copper mineralization. The reconnaissance rock geochemical survey in layered volcanic and volcaniclastic terrane in the Jabal Dalfa quadrangle identified a zinc anomaly in quartzite and a nickel-copper zone that is an extension of the Jabal Judayr prospect, where a low-grade, nickel-copper sulfide deposit is known. The Precambrian terrane in the Harrat Nawasif quadrangle has no known mineral resource potential.

Using Nonsense Word Fluency to Predict Reading Proficiency in Kindergarten through Second Grade for English Learners and Native English Speakers

ERIC Educational Resources Information Center

Fien, Hank; Baker, Scott K.; Smolkowski, Keith; Smith, Jean L. Mercier; Kame'enui, Edward J.; Beck, Carrie Thomas

2008-01-01

This study examined the validity of Nonsense Word Fluency as an index of beginning reading proficiency for students in kindergarten through second grade. Validity evidence for Nonsense Word Fluency is addressed in the context of research-based instructional practices implemented on a large scale. Technical adequacy data are presented for all…

Mineral facilities of Europe

USGS Publications Warehouse

Almanzar, Francisco; Baker, Michael S.; Elias, Nurudeen; Guzman, Eric

2010-01-01

This map displays over 1,700 records of mineral facilities within the countries of Europe and western Eurasia. Each record represents one commodity and one facility type at a single geographic location. Facility types include mines, oil and gas fields, and plants, such as refineries, smelters, and mills. Common commodities of interest include aluminum, cement, coal, copper, gold, iron and steel, lead, nickel, petroleum, salt, silver, and zinc. Records include attributes, such as commodity, country, location, company name, facility type and capacity (if applicable), and latitude and longitude geographical coordinates (in both degrees-minutes-seconds and decimal degrees). The data shown on this map and in table 1 were compiled from multiple sources, including (1) the most recently available data from the U.S. Geological Survey (USGS) Minerals Yearbook (Europe and Central Eurasia volume), (2) mineral statistics and information from the USGS Minerals Information Web site (http://minerals.usgs.gov/minerals/pubs/country/europe.html), and (3) data collected by the USGS minerals information country specialists from sources, such as statistical publications of individual countries, annual reports and press releases of operating companies, and trade journals. Data reflect the most recently published table of industry structure for each country at the time of this publication. Additional information is available from the country specialists listed in table 2.

The Miner's Canary

ERIC Educational Resources Information Center

Guinier, Lani

2005-01-01

Miners used canaries as early warning signals: when a canary gasped for breath, the miners knew there was a problem with the atmosphere in the mine. The experience of people of color in higher education can be used similarly as a diagnostic tool.

43 CFR 3815.1 - Mineral locations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Mineral locations. 3815.1 Section 3815.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Stock Driveway Withdrawals § 3815.1 Mineral locations. Under authority of the provisions of the...

43 CFR 3815.1 - Mineral locations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Mineral locations. 3815.1 Section 3815.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Stock Driveway Withdrawals § 3815.1 Mineral locations. Under authority of the provisions of the...

43 CFR 3815.1 - Mineral locations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Mineral locations. 3815.1 Section 3815.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Stock Driveway Withdrawals § 3815.1 Mineral locations. Under authority of the provisions of the...

43 CFR 3815.1 - Mineral locations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Mineral locations. 3815.1 Section 3815.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Stock Driveway Withdrawals § 3815.1 Mineral locations. Under authority of the provisions of the...

Electron microprobe mineral analysis guide

NASA Technical Reports Server (NTRS)

Brown, R. W.

1980-01-01

Electron microprobe mineral analysis guide is a compilation of X-ray tables and spectra recorded from various mineral matrices. Spectra were obtained using electron microprobe, equipped with LiF geared, curved crystal X-ray spectrometers, utilizing typical analytical operating conditions: 15 Kv acceleration potential, 0.02 microampere sample current as measured on a clinopyroxene standard (CP19). Tables and spectra are presented for the majority of elements, fluorine through uranium, occurring in mineral samples from lunar, meteoritic and terrestrial sources. Tables for each element contain relevant analytical information, i.e., analyzing crystal, X-ray peak, background and relative intensity information, X-ray interferences and a section containing notes on the measurement. Originally intended to cover silicates and oxide minerals the tables and spectra have been expanded to cover other mineral phases. Electron microprobe mineral analysis guide is intended as a spectral base to which additional spectra can be added as the analyst encounters new mineral matrices.

Preparing clinical grade Ag-specific T cells for adoptive immunotherapy trials

PubMed Central

DiGiusto, DL; Cooper, LJN

2007-01-01

The production of clinical-grade T cells for adoptive immunotherapy has evolved from the ex vivo numerical expansion of tumor-infiltrating lymphocytes to sophisticated bioengineering processes often requiring cell selection, genetic modification and other extensive tissue culture manipulations, to produce desired cells with improved therapeutic potential. Advancements in understanding the biology of lymphocyte signaling, activation, homing and sustained in vivo proliferative potential have redefined the strategies used to produce T cells suitable for clinical investigation. When combined with new technical methods in cell processing and culturing, the therapeutic potential of T cells manufactured in academic centers has improved dramatically. Paralleling these technical achievements in cell manufacturing is the development of broadly applied regulatory standards that define the requirements for the clinical implementation of cell products with ever-increasing complexity. In concert with academic facilities operating in compliance with current good manufacturing practice, the prescribing physician can now infuse T cells with a highly selected or endowed phenotype that has been uniformly manufactured according to standard operating procedures and that meets federal guidelines for quality of investigational cell products. In this review we address salient issues related to the technical, immunologic, practical and regulatory aspects of manufacturing these advanced T-cell products for clinical use. PMID:17943498

Technical note: the United States Department of Agriculture beef yield grade equation requires modification to reflect the current longissimus muscle area to hot carcass weight relationship.

PubMed

Lawrence, T E; Farrow, R L; Zollinger, B L; Spivey, K S

2008-06-01

With the adoption of visual instrument grading, the calculated yield grade can be used for payment to cattle producers selling on grid pricing systems. The USDA beef carcass grading standards include a relationship between required LM area (LMA) and HCW that is an important component of the final yield grade. As noted on a USDA yield grade LMA grid, a 272-kg (600-lb) carcass requires a 71-cm(2) (11.0-in.(2)) LMA and a 454-kg (1,000-lb) carcass requires a 102-cm(2) (15.8-in.(2)) LMA. This is a linear relationship, where required LMA = 0.171(HCW) + 24.526. If a beef carcass has a larger LMA than required, the calculated yield grade is lowered, whereas a smaller LMA than required increases the calculated yield grade. The objective of this investigation was to evaluate the LMA to HCW relationship against data on 434,381 beef carcasses in the West Texas A&M University (WTAMU) Beef Carcass Research Center database. In contrast to the USDA relationship, our data indicate a quadratic relationship [WTAMU LMA = 33.585 + 0.17729(HCW) -0.0000863(HCW(2))] between LMA and HCW whereby, on average, a 272-kg carcass has a 75-cm(2) (11.6-in.(2)) LMA and a 454-kg carcass has a 96-cm(2) (14.9-in.(2)) LMA, indicating a different slope and different intercept than those in the USDA grading standards. These data indicate that the USDA calculated yield grade equation favors carcasses lighter than 363 kg (800 lb) for having above average muscling and penalizes carcasses heavier than 363 kg (800 lb) for having below average muscling. If carcass weights continue to increase, we are likely to observe greater proportions of yield grade 4 and 5 carcasses because of the measurement bias that currently exists in the USDA yield grade equation.

Nb sbnd Th sbnd Zr mineralization in microgranite—microsyenite at Jabal Tawlah, Midyan region, Kingdom of Saudi Arabia

NASA Astrophysics Data System (ADS)

Drysdall, Alan R.; Douch, Colin J.

A composite sill of mineralized and highly radioactive microgranite—microsyenite caps Jabal Tawlah, a low ridge in the extreme NW of the Arabian Shield. The leucocratic composition, distribution of quartz and low K 2O:Na 2O ratios indicate that deuteric processes, including separation of a silica-rich phase and albitization, played a major role. Mineralization is in the form of a disseminated enrichment in Nb, Ta, Sn, Th, Y, heavy REE and Zr. Four Y- and heavy REE-bearing minerals, gagarinite [NaCaY(F,Cl) 6], fergusonite [(Y,Er,Ce,Fe)(Nb,Ta,Ti)O 4], xenotime and yttrian fluorite, as well as zircon, columbite, thorite, sphalerite, galena, pyrite, ilmenite, hematite, limonite, magnetite, goethite, siderite, possible chrysocolla and an MnO-bearing mineral have been identified. The geochemical signature of the mineralization is similar to that which distinguishes alkali granites from other granitic rocks. Jabal az Zuhd, a major plutonic complex consisting largely of alkali granite, crops out only 5 km NW of Jabal Tawlah. However, there is no other evidence of possible derivation from a parental alkali granite magma. Reserves indicated by outcrop dimensions and three drill-hole intersections are 6.4 million tonnes to an average depth of 65 m below wadi level, grading 0.34% Nb, 0.52% Y, 0.47% Zn and approximately 4% zircon (plus 175 ppm Ta, 380 ppm Sn, 700 ppm Th and heavy REE).

30 CFR 57.5070 - Miner training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Miner training. 57.5070 Section 57.5070 Mineral... Agents, and Diesel Particulate Matter Diesel Particulate Matter-Underground Only § 57.5070 Miner training. (a) Mine operators must provide annual training to all miners at a mine covered by this part who can...

43 CFR 3816.1 - Mineral locations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Mineral locations. 3816.1 Section 3816.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Reclamation Withdrawals § 3816.1 Mineral locations. The Act of April 23, 1932 (47 Stat. 136; 43...

43 CFR 3816.1 - Mineral locations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Mineral locations. 3816.1 Section 3816.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Reclamation Withdrawals § 3816.1 Mineral locations. The Act of April 23, 1932 (47 Stat. 136; 43...

43 CFR 3816.1 - Mineral locations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Mineral locations. 3816.1 Section 3816.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Reclamation Withdrawals § 3816.1 Mineral locations. The Act of April 23, 1932 (47 Stat. 136; 43...

43 CFR 3816.1 - Mineral locations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Mineral locations. 3816.1 Section 3816.1..., DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LANDS AND MINERALS SUBJECT TO LOCATION Mineral Locations in Reclamation Withdrawals § 3816.1 Mineral locations. The Act of April 23, 1932 (47 Stat. 136; 43...

Onboard autonomous mineral detectors for Mars rovers

NASA Astrophysics Data System (ADS)

Gilmore, M. S.; Bornstein, B.; Castano, R.; Merrill, M.; Greenwood, J.

2005-12-01

Mars rovers and orbiters currently collect far more data than can be downlinked to Earth, which reduces mission science return; this problem will be exacerbated by future rovers of enhanced capabilities and lifetimes. We are developing onboard intelligence sufficient to extract geologically meaningful data from spectrometer measurements of soil and rock samples, and thus to guide the selection, measurement and return of these data from significant targets at Mars. Here we report on techniques to construct mineral detectors capable of running on current and future rover and orbital hardware. We focus on carbonate and sulfate minerals which are of particular geologic importance because they can signal the presence of water and possibly life. Sulfates have also been discovered at the Eagle and Endurance craters in Meridiani Planum by the Mars Exploration Rover (MER) Opportunity and at other regions on Mars by the OMEGA instrument aboard Mars Express. We have developed highly accurate artificial neural network (ANN) and Support Vector Machine (SVM) based detectors capable of identifying calcite (CaCO3) and jarosite (KFe3(SO4)2(OH)6) in the visible/NIR (350-2500 nm) spectra of both laboratory specimens and rocks in Mars analogue field environments. To train the detectors, we used a generative model to create 1000s of linear mixtures of library end-member spectra in geologically realistic percentages. We have also augmented the model to include nonlinear mixing based on Hapke's models of bidirectional reflectance spectroscopy. Both detectors perform well on the spectra of real rocks that contain intimate mixtures of minerals, rocks in natural field environments, calcite covered by Mars analogue dust, and AVIRIS hyperspectral cubes. We will discuss the comparison of ANN and SVM classifiers for this task, technical challenges (weathering rinds, atmospheric compositions, and computational complexity), and plans for integration of these detectors into both the Coupled Layer

Green lumber grade yields from factory grade logs of three oak species

Treesearch

Daniel A. Yaussy

1986-01-01

Multivariate regression models were developed to predict green board foot yields for the seven common factory lumber grades processed from white, black, and chestnut oak factory grade logs. These models use the standard log measurements of grade, scaling diameter, log length, and proportion of scaling defect. Any combination of lumber grades (such as 1 Common and...

Self-Grading and Peer-Grading for Formative and Summative Assessments in 3rd through 12th Grade Classrooms: A Meta-Analysis

ERIC Educational Resources Information Center

Sanchez, Carmen E.; Atkinson, Kayla M.; Koenka, Alison C.; Moshontz, Hannah; Cooper, Harris

2017-01-01

The "assessment 'for' learning" movement in education has increased attention to self-grading and peer-grading practices in primary and secondary schools. This research synthesis examined several questions pertaining to the use of self-grading and peer-grading in conjunction with criterion-referenced testing in 3rd- through…

Improving Learning, Retention of Knowledge, and Attitude of Students in a Vocational-Technical College through Interactive Computer Technology.

ERIC Educational Resources Information Center

Hitchcock, A. Allen

The problem that this practicum attempted to solve was that students in a vocational-technical college tended to underachieve in courses that were mainly cognitive in nature, as evidenced by low overall grade-point course averages and other measures. The researcher designed computer-based simulation/gaming instruction that aimed to increase…

Mineral commodity summaries 2013

USGS Publications Warehouse

,

2013-01-01

Each chapter of the 2013 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2012 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2013 are welcomed.

Mineral commodity summaries 2014

USGS Publications Warehouse

,

2014-01-01

Each chapter of the 2014 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2013 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2014 are welcomed.

Bone mineral density in postmenopausal Mexican-Mestizo women with normal body mass index, overweight, or obesity.

PubMed

Méndez, Juan Pablo; Rojano-Mejía, David; Pedraza, Javier; Coral-Vázquez, Ramón Mauricio; Soriano, Ruth; García-García, Eduardo; Aguirre-García, María Del Carmen; Coronel, Agustín; Canto, Patricia

2013-05-01

Obesity and osteoporosis are two important public health problems that greatly impact mortality and morbidity. Several similarities between these complex diseases have been identified. The aim of this study was to analyze if different body mass indexes (BMIs) are associated with variations in bone mineral density (BMD) among postmenopausal Mexican-Mestizo women with normal weight, overweight, or different degrees of obesity. We studied 813 postmenopausal Mexican-Mestizo women. A structured questionnaire for risk factors was applied. Height and weight were used to calculate BMI, whereas BMD in the lumbar spine (LS) and total hip (TH) was measured by dual-energy x-ray absorptiometry. We used ANCOVA to examine the relationship between BMI and BMDs of the LS, TH, and femoral neck (FN), adjusting for confounding factors. Based on World Health Organization criteria, 15.13% of women had normal BMI, 39.11% were overweight, 25.96% had grade 1 obesity, 11.81% had grade 2 obesity, and 7.99% had grade 3 obesity. The higher the BMI, the higher was the BMD at the LS, TH, and FN. The greatest differences in size variations in BMD at these three sites were observed when comparing women with normal BMI versus women with grade 3 obesity. A higher BMI is associated significantly and positively with a higher BMD at the LS, TH, and FN.

Performance analysis of mineral mapping method to delineate mineralization zones under tropical region

NASA Astrophysics Data System (ADS)

Wakila, M. H.; Saepuloh, A.; Heriawan, M. N.; Susanto, A.

2016-09-01

Geothermal explorations and productions are currently being intensively conducted at certain areas in Indonesia such as Wayang Windu Geothermal Field (WWGF) in West Java, Indonesia. The WWGF is located at wide area covering about 40 km2. An accurate method to map the distribution of heterogeneity minerals is necessary for wide areas such as WWGF. Mineral mapping is an important method in geothermal explorations to determine the distribution of minerals which indicate the surface manifestations of geothermal system. This study is aimed to determine the most precise and accurate methods for minerals mapping at geothermal field. Field measurements were performed to assess the accuracy of three proposed methods: 1) Minimum Noise Fraction (MNF), utilizing the linear transformation method to eliminate the correlation among the spectra bands and to reduce the noise in the data, 2) Pixel Purity Index (PPI), a designed method to find the most extreme spectrum pixels and their characteristics due to end-members mixing, 3) Spectral Angle Mapper (SAM), an image classification technique by measuring the spectral similarity between an unknown object with spectral reference in n- dimension. The output of those methods were mineral distribution occurrence. The performance of each mapping method was analyzed based on the ground truth data. Among the three proposed method, the SAM classification method is the most appropriate and accurate for mineral mapping related to spatial distribution of alteration minerals.

Public High School Teachers of Career and Technical Education in 2007-08. Web Tables. NCES 2011-235

ERIC Educational Resources Information Center

Bersudskaya, Vera; Cataldi, Emily Forrest

2011-01-01

These Web Tables focus on public school teachers in grades 9-12 who taught primarily career and technical education (CTE), academic, or other subjects during the 2007-08 school year. CTE teachers are grouped based on their main subject area: nonoccupational CTE, including family and consumer sciences education and general labor market preparation,…

Column bioleaching of low-grade mining ore containing high level of smithsonite, talc, sphaerocobaltite and azurite.

PubMed

Ilyas, Sadia; Chi, Ruan; Bhatti, H N; Bhatti, I A; Ghauri, M A

2012-03-01

Present work describes the bioleaching potential of metals from low-grade mining ore containing smithsonite, sphaerocobaltite, azurite and talc as main gangue minerals with adapted consortium of Sulfobacillus thermosulfidooxidans strain-RDB and Thermoplasma acidophilum. Bioleaching potential improved markedly by added energy source, acid preleaching and adaptation of microbial consortium with mixed metal ions. During whole leaching period including acid preleaching stage of 960 h and bioleaching stage of 212 days about 76% Co, 70% Zn, 84% Cu, 72% Ni and 63% Fe leached out.

Tentative explanatory variable of lung dust concentration in gold miners exposed to crystalline silica.

PubMed

Dufresne, A; Loosereewanich, P; Bégin, R; Dion, C; Ecobichon, D; Muir, D C; Ritchie, A C; Perrault, G

1998-01-01

The first objective of the study was to investigate the relationships between quantitative lung mineral dust burdens, dust exposure history, and pathological fibrosis grading in silicotic workers. The second objective was to evaluate the association between particle size parameters, concentration of retained silica particles and the severity of the silicosis. Sixty-seven paraffin-embedded lung tissue samples of silicotic patients were analyzed. The cases of silicosis included 39 non-lung cancer patients and 28 patients with lung cancer. All of the cases were gold miners in the Province of Ontario, Canada. Particles, both angular and fibrous, were extracted from lung parenchyma by a bleach digestion method, mounted on copper microscopic grids by a carbon replica technique, and analyzed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). Quartz concentration was also determined by X-ray diffraction (XRD) on a silver membrane filter after the extraction from the lung parenchyma. Total particles, silica, clay, and quartz also increase in concentration with increased age at death, although the trends are not statistically significant. Quartz concentration has a statistically significant correlation with the silicosis severity score (r = +0.45, p < 0.001), with the geometric mean concentration increasing from 2.24 micrograms/mg in the group having silicosis severity score less than 1 to 4.80 micrograms/mg in group with highest score. Quartz concentration is the only significant explanatory variable of the silicosis severity with a regression coefficient of +0.41 (p < 0.001). Among several dust exposure variables extracted from the work history of the miners, the calendar year of first exposure was the primary significant determinant of lung retained total particles, silica, and clay minerals, except for quartz. A statistically significant linear relationship between lung quartz concentration and silicosis severity in the gold miners was

Onyx Embolization Before the Surgical Treatment of Grade III Spetzler-Martin Brain Arteriovenous Malformations: Single-Center Experience and Technical Nuances.

PubMed

Luzzi, Sabino; Del Maestro, Mattia; Bongetta, Daniele; Zoia, Cesare; Giordano, Aldo V; Trovarelli, Donatella; Raysi Dehcordi, Sohelia; Galzio, Renato J

2018-05-09

Grade III Spetzler-Martin brain arteriovenous malformations (AVMs) are a specific set of AVMs with high variability in terms of site, size, angioarchitecture, flow dynamics, and involvement of eloquent areas. Surgery preceded by preoperative embolization has been reported as a useful treatment option for these lesions. The aim of this study is to report outcomes and personal experience of combined preoperative Onyx embolization and surgical resection on a consecutive series of grade III brain AVMs. Between 2005 and 2017, 27 grade III AVMs were treated by means of a staged Onyx embolization and subsequent surgical treatment. Site and size of the AVMs, embolization, and surgical specifics as well as complications and outcomes were retrospectively reviewed. All AVMs were supratentorial, 13 of which were hemorrhagic. Mean nidal volume was 19.5 mL. Average embolization sessions were 1.6. Mean embolization-related obliteration rate and morbidity were 28.8% and 3.7%, respectively. Surgery was performed within 3.7 days on average. In our experience, Onyx embolization made the nidus excision easier, facilitated the hemostasis, and contributed to the early identification of the lesion in cases of small or racemose nidus. The surgical obliteration rate was 92.6%. A good overall outcome (modified Rankin Scale score 0-2) was achieved in 70.4% of patients. In our experience, preoperative Onyx embolization helped the surgical management of grade III Spetzler-Martin brain AVMs. Careful evaluation of the angioarchitecture, a tailored strategy in the embolization process, and full cooperation within the neurosurgical-neuroendovascular team are mandatory. Copyright © 2018 Elsevier Inc. All rights reserved.

Arsenic mineral dissolution and possible mobilization in mineral-microbe-groundwater environment.

PubMed

Islam, A B M R; Maity, Jyoti Prakash; Bundschuh, Jochen; Chen, Chien-Yen; Bhowmik, Bejon Kumar; Tazaki, Kazue

2013-11-15

Arsenic (As) is widely distributed in the nature as ores or minerals. It has been attracted much attention for the global public health issue, especially for groundwater As contamination. The aim of this study was to elucidate the characteristics of microbes in groundwater where As-minerals were dissolved. An ex situ experiment was conducted with 7 standard As-minerals in bacteria-free groundwater and stored in experimental vessels for 1 year without supplementary nutrients. The pH (6.7-8.4) and EhS.H.E. (24-548 mV) changed between initial (0 day) and final stages (365 days) of experiment. The dissolution of As was detected higher from arsenolite (4240 ± 8.69 mg/L) and native arsenic (4538 ± 9.02 mg/L), whereas moderately dissolved from orpiment (653 ± 3.56 mg/L) and realgar (319 ± 2.56 mg/L) in compare to arsenopyrite (85 ± 1.25mg/L) and tennantite (3 ± 0.06 mg/L). Optical microscopic, scanning electron microscopic observations and flurometric enumeration revealed the abundance of As-resistant bacillus, coccus and filamentous types of microorganisms on the surface of most of As-mineral. 4'-6-Diamidino-2-phenylindole (DAPI)-stained epifluorescence micrograph confirmed the presence of DNA and carboxyfluorescein diacetate (CFDA) staining method revealed the enzymatically active bacteria on the surface of As-minerals such as in realgar (As4S4). Therefore, the microbes enable to survive and mobilize the As in groundwater by dissolution/bioweathering of As-minerals. Copyright © 2012. Published by Elsevier B.V.

Interplay between black carbon and minerals contributes to long term carbon stabilization and mineral transformation

NASA Astrophysics Data System (ADS)

Liang, B.; Weng, Y. T.; Wang, C. C.; Chiang, C. C.; Liu, C. C.; Lehmann, J.

2017-12-01

Black carbon receives increasing global wide research attention due to its role in carbon sequestration, soil fertility enhancement and remediation application. Generally considered chemically stable in bulk, the reactive surface of BC can interplays with minerals and form strong chemical bondage, which renders physical protection of BC and contributes to its long term stabilization. Using historical BC-rich Amazonian Dark Earth (ADE), we probe the in-situ organo-mineral association and transformation of BC and minerals over a millennium scale using various synchrotron-based spectroscopic (XANES, FTIR) and microscopic (TXM) methods. Higher content of SRO minerals was found in BC-rich ADE compare to adjacent tropical soils. The iron signature found in BC-rich ADE was mainly ferrihydrite/lepidocrocite, a more reactive form of Fe compared to goethite, which was dominant in adjacent soil. Abundant nano minerals particles were observed in-situ associated with BC surface, in clusters and layers. The organo-mineral interaction lowers BC bioavailability and enhances its long-term stabilization in environment, while at the same time, transforms associated minerals into more reactive forms under rapid redox/weathering environment. The results suggest that mineral physical protection for BC sequestration may be more important than previous understanding. The scale up application of BC/biochar into agricultural systems and natural environments have long lasting impact on the in-situ transformation of associated minerals.

On and Off Computer Writing of Eighth Grade Students Experienced in Word Processing. Technical Report 90-1.

ERIC Educational Resources Information Center

Owston, Ronald D.; And Others

A study assessed the impact of word processing on the writing of junior high school students, experienced in working with computers, for a number of tasks, including writing. Subjects, 111 eighth grade students in four communications arts classes at a Canadian middle-class suburban school, who had been using computers for writing for a year and a…

Comment on "Evaluation of X-ray diffraction methods for determining the crystal growth mechanisms of clay minerals in mudstones, shales and slates," by L. N. Warr and D. R. Peacor

USGS Publications Warehouse

Eberl, D.D.; Srodon, J.; Drits, V.A.

2003-01-01

A recent paper by Warr and Peacor (2002) suggested that our use of the Bertaut-Warren-Averbach technique (MudMaster computer program) for studying changes in crystallite thickness distributions (CTDs) of clay minerals during diagenesis and very low-grade metamorphism is not reliable because it is dependent on many variables which can not be fully controlled. Furthermore, the authors implied that the measured shapes of CTDs cannot be used with confidence to deduce crystal growth mechanisms and histories for clays, based on our CTD simulation approach (using the Galoper computer program). We disagree with both points, and show that the techniques are powerful, reliable and useful for studying clay mineral alteration in rocks. ?? 2003 Schweiz. Mineral. Petrogr. Ges.