Effectiveness of PowerPoint Presentation on Students' Cognitive Achievement in Technical Drawing

ERIC Educational Resources Information Center

Gambari, Amosa Isiaka; Yusuf, Hamdalat Taiwo; Balogun, Sherifat Adepeju

2015-01-01

This paper discusses importance of technology education and evidence of declining performance of junior secondary school students in basic technology subject. Benefits of PowerPoint presentation in classroom instruction as a means to improve classroom teaching in the developing countries are also discussed. The effectiveness of PowerPoint…

International Students in an Indian Technical University: Faculty Counselors' Preparedness and Perspectives

ERIC Educational Resources Information Center

Karky, Nandini

2013-01-01

A qualitative inquiry into the presence of international students in an Indian Technical University, through the voices of the faculty, who are appointed as international students' counselors. A case study methodology was employed with document analysis and interviews to perceive how technical faculty managed students from varying cultural…

Some Characteristics and Writing Problems of Technically Oriented Students.

ERIC Educational Resources Information Center

Ruehr, Ruthann

An understanding of the writing problems and personalities of some of the technically oriented students at Michigan Technological University may help others who teach similar students. Although their scores on aptitude tests are high, these students have had very little experience in writing. In addition, the majority of the students have had very…

FY 2002 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2003-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2002. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2005 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Narmore, K. A. (Compiler)

2007-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2005. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1985 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1985-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshal Space Flight Center (MSFC) personnel in FY 85. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Va. 22161.

Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Turner, J. E. (Compiler)

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2001 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

2002-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2001. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2004 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2006-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel FY 2004. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM maybe of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1986 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1986-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY-86 are presented. Also included are papers of MSFC contractors.

A Replication of the Technical Adequacy of the Student Subjective Wellbeing Questionnaire

ERIC Educational Resources Information Center

Renshaw, Tyler L.

2015-01-01

The present study reports on a replication of the technical adequacy of the Student Subjective Wellbeing Questionnaire (SSWQ), which is a 16-item self-report instrument for assessing youth's academic efficacy, educational purpose, joy of learning, and school connectedness, with a sample of adolescents in Grades 6 to 7 (N = 438). Findings confirmed…

FY 1989 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1989-01-01

A compendium of bibliographic references to papers presented by Marshall Space Flight Center (MSFC) personnel and contractors during FY 1989 is provided. The papers include formal NASA technical reports, memoranda, papers which were published in technical journals, and presentations by MSFC personnel. The formal NASA technical reports and memoranda have abstracts included. Sources for obtaining these documents are also included.

FY 2003 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2004-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2003. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Spring.eld, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

Mentoring disadvantaged nursing students through technical writing workshops.

PubMed

Johnson, Molly K; Symes, Lene; Bernard, Lillian; Landson, Margie J; Carroll, Theresa L

2007-01-01

Recent studies have identified a problematic gap for nursing students between terse clinical writing and formal academic writing. This gap can create a potential barrier to academic and workplace success, especially for disadvantaged nursing students who have not acquired the disciplinary conventions and sophisticated writing required in upper-level nursing courses. The authors demonstrate the need for writing-in-the-discipline activities to enhance the writing skills of nursing students, describe the technical writing workshops they developed to mentor minority and disadvantaged nursing students, and provide recommendations to stimulate educator dialogue across disciplines and institutions.

ConfChem Conference on Select 2016 BCCE Presentations: Tracking Student Use of Web-Based Resources for Chemical Education

ERIC Educational Resources Information Center

Bodily, Robert; Wood, Steven

2017-01-01

This paper presents the technical infrastructure required to track student use of web-based resources in an introductory chemistry course, the design of a student dashboard, and the results from analyzing student web-based resource use. Students were tracked as they interacted with online homework problems and high quality course content videos.…

Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.

ERIC Educational Resources Information Center

Busby, John C.; Johnson, Richard S.

Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…

What Technical Writing Students Should Know about Typeface Personality

ERIC Educational Resources Information Center

Mackiewicz, Jo

2004-01-01

Typeface personality impacts the rhetorical effect of students' documents, yet it receives little attention in textbooks. Technical writing students should stand the definition of "appropriate" in relation to typeface selection, the difference between type's functional and semantic properties, the difference between type family and personality,…

The Acoustical Presentation of Technical Information.

ERIC Educational Resources Information Center

Barnett, George A.

1992-01-01

Advocates listening to technical information in much the same way as scientists and engineers look at graphics to understand the relationships among variables. Specifies a number of potential benefits of this approach. Demonstrates the presentation of acoustic information with data on the frequency of television viewing from 1950 to 1988. (SR)

Teaching foreign languages to technical students by means of educational online technologies

NASA Astrophysics Data System (ADS)

Ivleva, Natalia V.; Fibikh, Ekaterina V.

2015-01-01

The article reveals new methods of effectiveness increase in teaching foreign languages to technical students using information and communication technologies and their practical implementation at the premises of the Foreign Languages Resource Center of Siberian State Aerospace University. Adoption of information and communication technologies to the educational process is based on students' independent language learning that encourages more productive development of language competences mastered by students and future specialists in a special area of technical knowledge as a whole.

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

FY 1998 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

1999-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC (Marshall Space Flight Center) personnel in FY98. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1997 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

1998-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY97. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1988 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1988-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 88. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the NationaL Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY87 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1987-01-01

The document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY87. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, Va. 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

[Teaching non-technical skills for critical incidents: Crisis resource management training for medical students].

PubMed

Krüger, A; Gillmann, B; Hardt, C; Döring, R; Beckers, S K; Rossaint, R

2009-06-01

Physicians have to demonstrate non-technical skills, such as communication and team leading skills, while coping with critical incidents. These skills are not taught during medical education. A crisis resource management (CRM) training was established for 4th to 6th year medical students using a full-scale simulator mannikin (Emergency Care Simulator, ECS, METI). The learning objectives of the course were defined according to the key points of Gaba's CRM concept. The training consisted of theoretical and practical parts (3 simulation scenarios with debriefing). Students' self-assessment before and after the training provided the data for evaluation of the training outcome. A total of 65 students took part in the training. The course was well received in terms of overall course quality, debriefings and didactic presentation, the mean overall mark being 1.4 (1: best, 6: worst). After the course students felt significantly more confident when facing incidents in clinical practice. The main learning objectives were achieved. The effectiveness of applying the widely used ECS full-scale simulator in interdisciplinary teaching has been demonstrated. The training exposes students to crisis resource management issues and motivates them to develop non-technical skills.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Relevance in Basic Composition: Writing Assignments for Technical Students.

ERIC Educational Resources Information Center

Tichenor, Stuart

Generally, students in vocational and technical colleges are in writing classes because they must be, not because they want to be. As a rule, students in basic composition classes have been more or less continually exposed to writing classes since middle school where they been asked to keep journals, read articles and short stories, and write…

Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

ERIC Educational Resources Information Center

Efande, Lyonga John

2015-01-01

This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

FY 1991 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1991-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 1991 are presented. Papers of MSFC contractors are also included. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Entrepreneurial Attitude and Entrepreneurial Efficacy of Technical Secondary School Students

ERIC Educational Resources Information Center

Zaidatol Akmaliah, Lope Pihie; Bagheri, Afsaneh

2010-01-01

Entrepreneurial attitude and entrepreneurial efficacy are considered to be two important factors influencing students' intention and success in becoming entrepreneurs. This study was conducted to determine the entrepreneurial attitude and entrepreneurial efficacy of 3000 students following technical subjects in the secondary schools of Malaysia.…

Monitoring the Effect of Internet Use on Students Behavior Case Study: Technical Faculty Bor, University of Belgrade

ERIC Educational Resources Information Center

Niculovic, Milica; Zivkovic, Dragana; Manasijevic, Dragan; Strbac, Nada

2012-01-01

A large number of criteria for evaluating Internet addiction have been developed recently. The research of Internet addiction among students of the Technical faculty in Bor, University of Belgrade has been conducted and its results are presented in this paper. The study included 270 students using criteria of Young's Internet Addiction Test. In…

Fiscal year 1979 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1979-01-01

This bibliography lists approximately 590 formal NASA technical reports, papers published in technical journals, presentations by MSFC personnel, and reports of MSFC contractors introduced into the NASA scientific and technical information system in 1979.

Non-technical skills assessment for prelicensure nursing students: An integrative review.

PubMed

Pires, Sara; Monteiro, Sara; Pereira, Anabela; Chaló, Daniela; Melo, Elsa; Rodrigues, Alexandre

2017-11-01

In nursing, non-technical skills are recognized as playing an important role to increase patient safety and successful clinical outcomes (Pearson and McLafferty, 2011). Non-technical skills are cognitive and social resource skills that complement technical skills and contribute to safe and efficient task performance (Flin et al., 2008). In order to effectively provide non-technical skills training, it is essential to have an instrument to measure these skills. An online search was conducted. Articles were selected if they referred to and/or described instruments assessing non-technical skills for nurses and/or prelicensure nursing students in educational, clinical and/or simulated settings with validation evidence (inclusion criteria). Of the 53 articles located, 26 met the inclusion criteria. Those referred to and/or described 16 instruments with validation evidence developed to assess non-technical skills in multidisciplinary teams including nurses. Although articles have shown 16 valid and reliable instruments, to our knowledge, no instrument has been published or developed and validated for the assessment of non-technical skills of only nurses in general, relevant for use in high-fidelity simulation-based training for prelicensure nursing students. Therefore, there is a need for the development of such an instrument. Copyright © 2017 Elsevier Ltd. All rights reserved.

FY 1994 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1994-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center personnel in FY94. It also includes papers of MSFC contractors and author indexes. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Technical Advances and Fifth Grade Reading Comprehension: Do Students Benefit?

ERIC Educational Resources Information Center

Fountaine, Drew

This paper takes a look at some recent studies on utilization of technical tools, primarily personal computers and software, for improving fifth-grade students' reading comprehension. Specifically, the paper asks what benefits an educator can expect students to derive from closed-captioning and computer-assisted reading comprehension products. It…

Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

Let's Talk about Student Presentations

ERIC Educational Resources Information Center

Doree, Suzanne; Jardine, Richard; Linton, Thomas

2007-01-01

This article offers our ideas on why it is important to teach our students how to speak about mathematics and some practical resources for incorporating speaking activities, helping students prepare, evaluating student presentations, and getting your department to talk about student presentations. The ideas in this article were compiled when the…

FY 1990 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1990-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 90 are presented. Also included are papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from NTIS. The information may be of value to the scientific and engineering community in determining what information has been published and what is available.

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic

Motivating Students to Complete High School through Career and Technical Education

ERIC Educational Resources Information Center

McDuffie, Kimberly Sabrina

2013-01-01

Since the 1980s, stakeholders have perceived Career and Technical Education (CTE) as a dumping ground for underachieving students who will not attend a 4-year college or university. Thus, the stigma has been created that CTE only serves low-performing students. The problem addressed in this study was that students were dropping out of high school…

Does teaching non-technical skills to medical students improve those skills and simulated patient outcome?

PubMed

Hagemann, Vera; Herbstreit, Frank; Kehren, Clemens; Chittamadathil, Jilson; Wolfertz, Sandra; Dirkmann, Daniel; Kluge, Annette; Peters, Jürgen

2017-03-29

The purpose of this study is to evaluate the effects of a tailor-made, non-technical skills seminar on medical student's behaviour, attitudes, and performance during simulated patient treatment. Seventy-seven students were randomized to either a non-technical skills seminar (NTS group, n=43) or a medical seminar (control group, n=34). The human patient simulation was used as an evaluation tool. Before the seminars, all students performed the same simulated emergency scenario to provide baseline measurements. After the seminars, all students were exposed to a second scenario, and behavioural markers for evaluating their non-technical skills were rated. Furthermore, teamwork-relevant attitudes were measured before and after the scenarios, and perceived stress was measured following each simulation. All simulations were also evaluated for various medical endpoints. Non-technical skills concerning situation awareness (p<.01, r=0.5) and teamwork (p<.01, r=0.45) improved from simulation I to II in the NTS group. Decision making improved in both groups (NTS: p<.01, r=0.39; control: p<.01, r=0.46). The attitude 'handling errors' improved significantly in the NTS group (p<.05, r=0.34). Perceived stress decreased from simulation I to II in both groups. Medical endpoints and patients´ outcome did not differ significantly between the groups in simulation II. This study highlights the effectiveness of a single brief seminar on non-technical skills to improve student's non-technical skills. In a next step, to improve student's handling of emergencies and patient outcomes, non-technical skills seminars should be accompanied by exercises and more broadly embedded in the medical school curriculum.

The FY 1992 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1992-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY92. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Fiscal year 1993 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1993-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY93. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Career and Technical Education (CTE) Student Success in Community Colleges: A Conceptual Model

ERIC Educational Resources Information Center

Hirschy, Amy S.; Bremer, Christine D.; Castellano, Marisa

2011-01-01

Career and technical education (CTE) students pursuing occupational associate's degrees or certificates differ from students seeking academic majors at 2-year institutions in several ways. This article examines several theoretical models of student persistence and offers a conceptual model of student success focused on CTE students in community…

The Evaluation of the Effectiveness of ESP Courses in Enhancing Technical Translation Proficiency: A Case Study of ESP Course for Mechanical Engineering Students

ERIC Educational Resources Information Center

Hatam, Amir Hussein; Shafiei, Shilan

2012-01-01

The purpose of the present study was twofold. Firstly, it tried to investigate the relationship between the technical English proficiency of the students of Mechanical Engineering in the universities of Iran and their technical translation proficiency in translating technical texts of Mechanics. Secondly, it attempted to evaluate the effectiveness…

Summer Student Research Presentations

NASA Technical Reports Server (NTRS)

Casey, Carol (Editor)

2005-01-01

In 2005, over 150 undergraduate students and first-year graduate students participated in a variety of research programs coordinated by the Jet Propulsion Laboratory Education Office in conjunction with the Caltech Student- Faculty Programs Office. The programs give students the opportunity to conduct research under the guidance of an experienced mentor for a 10-week period. Students gain valuable experience while contributing to the ongoing goals of JPL. Students are required to submit progress reports and an abstract, and to give an oral presentation of their projects to an audience of JPL staff and other students. This set of abstracts provides brief descriptions of the projects that were conducted by these students and their mentors. A schedule of student talks is also included.

FY 1999 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J.oyce E.Turner

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Positive and Negative Experiences of Career Technical Secondary Students in Online Courses

ERIC Educational Resources Information Center

Harms, David Mathew

2016-01-01

Research indicates that secondary students who are successful in online classes share common traits. However, many secondary career technical education (CTE) students taking online courses do not demonstrate the traits identified for success. CTE students may not benefit from online classes unless they are designed with their needs in mind. The…

An audit on technical quality of root fillings performed by undergraduate students.

PubMed

Fong, W; Heidarifar, O; Killough, S; Lappin, M J; El Karim, I A

2018-04-01

To evaluate radiographically the technical quality of root fillings performed by undergraduate dental students and to assess whether students were exposed to an appropriate endodontic case mix during their clinical training. A retrospective audit was undertaken evaluating the clinical records of patients who underwent endodontic procedures during the period from September 2015 to June 2016 in the Dental School at Queen's University Belfast, UK. Two final-year dental students were trained and calibrated to evaluate postoperative intra-oral periapical radiographs of completed root canal treatments using specific assessment criteria. Data were presented as frequencies, percentage and mean ± standard deviation (SD). Comparisons of treatment outcomes between groups (posterior and anterior teeth) were calculated using Fisher's exact test, and the level of significance was set at P < 0.05. Intra- and interexaminer reproducibility was assessed by Kappa statistics. A total of 222 teeth and 381 canals were assessed, and of those, 253 (66%) of the root fillings were found to be acceptable in all the assessment parameters, namely taper, length and lateral adaptation of the root filling. Subanalysis of individual root filling parameters revealed that 372 canals (97%) exhibited good taper, and 275 canals (72%) were considered to be of an appropriate length, with 89 canals (23%) found to be underfilled and 17 canals (5%) overfilled. Overall 346 (91%) of canals had good lateral condensation. Students treated both single and multirooted teeth, and there was no significant association between tooth type and the quality of root filling provided (P > 0.05). In the majority of the teeth treated by undergraduate students at Queen's University Belfast, the technical quality of the root filling was acceptable and students were exposed to an appropriate case mix for endodontic training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Helping Doctoral Students Establish Long-Term Identities as Technical Communication Scholars

ERIC Educational Resources Information Center

Grant-Davie, Keith; Matheson, Breeanne; Stephens, Eric James

2017-01-01

This article aims to help doctoral students in technical communication prepare themselves for the academic job market and for the subsequent process of earning tenure and promotion in increasingly demanding environments. The authors propose that students do four things: (a) learn to spot and articulate research problems; (b) find their…

FY 1996 Scientific and Technical Reports, Articles, Papers, and Presentations. Volume 1

NASA Technical Reports Server (NTRS)

Turner-Waits, Joyce E. (Compiler)

1996-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY96. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Empowering Technical College Students in the Work Place.

ERIC Educational Resources Information Center

Lewis, Theodore; And Others

The purpose of this report is to describe how Minnesota technical college students can be empowered through vocational education to be full participants in the labor force and to deal with the changes that they encounter in the workplace. Chapter 1 introduces the problem of keeping up with changes in the ways in which work is performed. Chapter 2…

The Role of Academic Student Services in the Retention of American Indian Students at a Sub-Baccalaureate Technical College

ERIC Educational Resources Information Center

Schmidtke, Carsten

2016-01-01

Perceptions of graduating American Indian students at a mainstream sub-baccalaureate technical college about how support from academic student services had helped them learn and persist in their studies were solicited. Bean's (2005) themes of college student retention served as the framework for the inquiry. Findings indicate that (1) academic…

Predisposition Factors of Career and Technical Education Transfer Students: A Hermeneutic Phenomenology Study

ERIC Educational Resources Information Center

Hioki, Warren; Lester, Derek; Martinez, Mario

2015-01-01

Six college students, who were career and technical education (CTE) transfer students in the state of Nevada, were interviewed Spring Semester of 2009. The study used a hermeneutic phenomenology framework as the method to identify those predisposition variables that heavily influenced the students in their decision to transfer to a senior…

Technical nursing students interacting with family members of hospitalized children.

PubMed

Onishi, Juliana Yukari Takahashi; Ribeiro, Circéa Amália; Silva, Maria Cristina Ferreira Carlos Rodrigues da; Borba, Regina Issuzu Hirooka de

2017-01-01

To understand technical nursing students' meaning of interacting with family members of hospitalized children. Symbolic Interactionism was used as the theoretical framework and Qualitative Content Analysis was the methodological procedure. A total of eight graduates from an institution situated in the city of Osasco, Sao Paulo state, participated in this study. Data were collected through semi-structured interviews. A total of five representative themes were revealed: Dealing with difficult situations with family members; Perceiving oneself to be unprepared to interact with family members; Family members being a helpful tool; Developing strategies to obtain a good interaction with family members; and Teachers being facilitators of the interaction with family members. To be acquainted with this experience has led to the understanding of the need to include the theme of family care in the curriculum of the Technical Nursing Course. Additionally, the present study contributed to reflections on the importance of such knowledge for this population and to the development of future studies, as this theme has been scarcely explored in the literature.

Looking inside the Black Box: The Value Added by Career and Technical Student Organizations to Students' High School Experience

ERIC Educational Resources Information Center

Alfeld, Corinne; Stone, James R., III; Aragon, Steven R.; Hansen, David M.; Zirkle, Christopher; Connors, James; Spindler, Matt; Romine, Rebecca Swinburne; Woo, Hui-Jeong

2007-01-01

In addition to hands-on learning in classrooms and work-related activities such as co-op, many CTE programs offer a career-focused student organization, known as a Career and Technical Student Organization, or CTSO. CTSOs have been touted as developing such characteristics as leadership and employability skills in students; however, there is…

FY 1995 Scientific and Technical Reports, Articles, Papers, and Presentations, Volume 1

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1995-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY95. It also includes papers of MSFC contractors. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

An English Language Curriculum for Technical Students. Practical Papers in English Education, Volume 2.

ERIC Educational Resources Information Center

Hutchinson, Tom; And Others

This curriculum for technical students aims at linking the identity of the learner, his initial linguistic and technical competence, and his expectations with the competence expected of him on entering the technical college. The materials of the curriculum make use of a wide variety of information and data sources such as school-level science…

Student Conceptions of Oral Presentations

ERIC Educational Resources Information Center

Joughin, Gordon

2007-01-01

A phonographic study of students' experience of oral presentations in an open learning theology programme constituted three contrasting conceptions of oral presentations--as transmission of ideas; as a test of students' understanding of what they were studying; and as a position to be argued. Each of these conceptions represented a combination of…

International Students in the Scientific and Technical Writing Class.

ERIC Educational Resources Information Center

Constantinides, Janet C.

A course sequence for teaching the forms and formats of scientific and technical writing to English as a second language (ESL) learners is described. The first assignment, a letter of application, serves as a diagnostic indication of the student's ability. The second assignment, a narrative, is designed to define the importance of audience and…

Reflections: Improving Medical Students' Presentation Skills.

PubMed

Tarkowski, Radoslaw

2017-12-01

Both good communication and presentation skills on the part of an academic teacher are crucial when trying to generate students' interest in the subject of a lecture. More generally, our task is to share knowledge in the most effective way possible. It is also worth teaching students presentation skills, as today's students are tomorrow's teachers. An engaging presentation is a powerful tool. There are some rules for presenting which I consider worthy of being discussed and taught at a medical university.

Factors Influencing the Pursuit of IT Certifications: A Study of Minnesota Public Community and Technical College Students

ERIC Educational Resources Information Center

Wilkens, Eric S.

2013-01-01

This quantitative study attempted to understand the factors that influence Minnesota community and technical college students to pursue Information Technology (IT) certification. The study investigated the problem of determining the factors that influence Minnesota community and technical college students to pursue IT certification along with…

Determinants of Entrepreneurial Intentions: Technical-Vocational Education and Training Students in Ethiopia

ERIC Educational Resources Information Center

Buli, Bereket Mamo; Yesuf, Wasihun Mohammed

2015-01-01

Purpose: The purpose of this paper is to examine factors that could explain the difference in entrepreneurial intention (EI) among technical-vocational education and training (TVET) program students. Centered on the theory of planned behavior (TPB), the paper aims to contribute to the understanding of factors that affect EIs of students and offer…

A large-scale mass casualty simulation to develop the non-technical skills medical students require for collaborative teamwork.

PubMed

Jorm, Christine; Roberts, Chris; Lim, Renee; Roper, Josephine; Skinner, Clare; Robertson, Jeremy; Gentilcore, Stacey; Osomanski, Adam

2016-03-08

There is little research on large-scale complex health care simulations designed to facilitate student learning of non-technical skills in a team-working environment. We evaluated the acceptability and effectiveness of a novel natural disaster simulation that enabled medical students to demonstrate their achievement of the non-technical skills of collaboration, negotiation and communication. In a mixed methods approach, survey data were available from 117 students and a thematic analysis undertaken of both student qualitative comments and tutor observer participation data. Ninety three per cent of students found the activity engaging for their learning. Three themes emerged from the qualitative data: the impact of fidelity on student learning, reflexivity on the importance of non-technical skills in clinical care, and opportunities for collaborative teamwork. Physical fidelity was sufficient for good levels of student engagement, as was sociological fidelity. We demonstrated the effectiveness of the simulation in allowing students to reflect upon and evidence their acquisition of skills in collaboration, negotiation and communication, as well as situational awareness and attending to their emotions. Students readily identified emerging learning opportunities though critical reflection. The scenarios challenged students to work together collaboratively to solve clinical problems, using a range of resources including interacting with clinical experts. A large class teaching activity, framed as a simulation of a natural disaster is an acceptable and effective activity for medical students to develop the non-technical skills of collaboration, negotiation and communication, which are essential to team working. The design could be of value in medical schools in disaster prone areas, including within low resource countries, and as a feasible intervention for learning the non-technical skills that are needed for patient safety.

High School Choice in New York City: A Report on the School Choices and Placements of Low-Achieving Students. Technical Appendices

ERIC Educational Resources Information Center

Nathanson, Lori; Corcoran, Sean; Baker-Smith, Christine

2013-01-01

This document presents the technical appendices that accompany the full report, "High School Choice in New York City: A Report on the School Choices and Placements of Low-Achieving Students." The appendices include: (1) The Shrinking Pool of Level 1 and Level 2 Students; and (2) Supplemental Tables and Figures. [For the full report, see…

Identifying Mental Health Elements among Technical University Students Using Fuzzy Delphi Method

NASA Astrophysics Data System (ADS)

Pua, P. K.; Lai, C. S.; Lee, M. F.

2017-08-01

Mental health is a part of our daily life that is often experienced. As a student, mental health issue often encounters a variety of difficult challenges at the higher education institution. A student with good mental health can handle and cope the normal stress of life, capable work productivity, enhance academic performance and able to make contribute to the community. However, rapidly transformation and changing of society have been impacted on students’ mental health, and it will be deteriorated and negatively impact on students if it absence of preventive controlled. This study aimed to identify the element of mental health among the technical university students. A total of 11 experts were selected to analyze the fuzziness consensus of experts. All collected data was analyzed by using the fuzzy Delphi method and the result shows that there are 4 elements of 8 elements that fulfill the requirement consensus of experts, which threshold value is equal and less than 0.2, the percentage of the expert group is more than 75%. The four elements were depression, anxiety, stress, and fear are often experienced by technical university students. In conclusion, precocious actions have to be taken by university and counseling center, parents and non-government organization in order to mitigate the mental health problem faced by students to improve the quality lifestyle students at the university.

Well, you have hepatic metastases: Use of technical language by medical students in simulated patient interviews.

PubMed

Bourquin, Céline; Stiefel, Friedrich; Mast, Marianne Schmid; Bonvin, Raphael; Berney, Alexandre

2015-03-01

This research explored medical students' use and perception of technical language in a practical training setting to enhance skills in breaking bad news in oncology. Terms potentially confusing to laypeople were selected from 108 videotaped interviews conducted in an undergraduate Communication Skills Training. A subset of these terms was included in a questionnaire completed by students (N=111) with the aim of gaining insight into their perceptions of different speech registers and of patient understanding. Excerpts of interviews were analyzed qualitatively to investigate students' communication strategies with respect to these technical terms. Fewer than half of the terms were clarified. Students checked for simulated patients' understanding of the terms palliative and metastasis/to metastasize in 22-23% of the interviews. The term ambulatory was spontaneously explained in 75% of the interviews, hepatic and metastasis/to metastasize in 22-24%. Most provided explanations were in plain language; metastasis/to metastasize and ganglion/ganglionic were among terms most frequently explained in technical language. A significant number of terms potentially unfamiliar and confusing to patients remained unclarified in training interviews conducted by senior medical students, even when they perceived the terms as technical. This exploration may offer important insights for improving future physicians' skills. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Drawing on Technical Writing Scholarship for the Teaching of Writing to Advanced ESL Students--A Writing Tutorial.

ERIC Educational Resources Information Center

Zielinska, Dorota

2003-01-01

Outlines the technical writing tutorial (TWT) that precedes an advanced English as a second language (ESL) writing course for students of English Philology at the Jagiellonian University, Poland. Finds a statistically significant increase in the performance of the students who had taken the TWT. Indicates that technical writing books and journals…

Using a Collaborative Critiquing Technique to Develop Chemistry Students' Technical Writing Skills

ERIC Educational Resources Information Center

Carr, Jeremy M.

2013-01-01

The technique, termed "collaborative critiquing", was developed to teach fundamental technical writing skills to analytical chemistry students for the preparation of laboratory reports. This exercise, which can be completed prior to peer-review activities, is novel, highly interactive, and allows students to take responsibility for their…

Contextualize Technical Writing Assessment to Better Prepare Students for Workplace Writing: Student-Centered Assessment Instruments

ERIC Educational Resources Information Center

Yu, Han

2008-01-01

To teach students how to write for the workplace and other professional contexts, technical writing teachers often assign writing tasks that reflect real-life communication contexts, a teaching approach that is grounded in the field's contextualized understanding of genre. This article argues to fully embrace contextualized literacy and better…

Undocumented College Students, Taxation, and Financial Aid: A Technical Note

ERIC Educational Resources Information Center

Olivas, Michael A.

2009-01-01

A surprising amount of litigation and legislation has erupted over undocumented college students. Victims at the federal level are the DREAM Act and immigration reform. Financial aid raises technical issues for undocumented college applicants and for the citizen children of undocumented parents. Generally, the undocumented are ineligible for…

Perceptions of Former Occupational-Technical Students. Research Report No. 4.

ERIC Educational Resources Information Center

Trufant, John E.; And Others

Former occupational-technical students were questioned as to their attitudes toward their community college programs. The large majority of respondents rated their overall experience very high, and said they would recommend their college to someone seeking the same program. Social activities, however, were rated quite low. Women and graduates were…

USAF/SCEEE Graduate Student Summer Support Program (1982). Management and Technical Report.

DTIC Science & Technology

1982-10-01

AD-A130 767 USAF/SCEEE GRADUATE STUDENT SUMMER SUPPORT PROGRAM (1982) MANAGEMENT AND..(U) SOUTHEASTERN CENTER FORELECTRICAL ENGINEERING EDUCATION INC...SUMMER SUPPORT PROGRAM Conducted by Southeastern Center for Electrical Engineering Education under USAF Contract Number F49620-82-C-0035 MANAGEMENT ...UNITED STATES AIR FORCE GRADUATE STUDENT SL24MER SUPPORT PROGRAM 1982 PROGRAM MANAGEMENT AND TECHNICAL REPORT SOUTHEASTERN CENTER FOR ELECTRICAL

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 40: Technical communications in aerospace education: A study of AIAA student members

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Barclay, Rebecca O.

1994-01-01

This paper describes the preliminary analysis of a survey of the American Institute of Aeronautics and Astronautics (AIAA) student members. In the paper we examine (1) the demographic characteristics of the students, (2) factors that affected their career decisions, (3) their career goals and aspirations, and (4) their training in technical communication and techniques for finding and using aerospace scientific and technical information (STI). We determine that aerospace engineering students receive training in technical communication skills and the use of STI. While those in the aerospace industry think that more training is needed, we believe the students receive the appropriate amount of training. We think that the differences between the amount of training students receive and the perception of training needs is related partially to the characteristics of the students and partially to the structure of the aerospace STI dissemination system. Overall, we conclude that the students' technical communication training and knowledge of STI, while limited by external forces, makes it difficult for students to achieve their career goals.

Technical Skills Training for Veterinary Students: A Comparison of Simulators and Video for Teaching Standardized Cardiac Dissection.

PubMed

Allavena, Rachel E; Schaffer-White, Andrea B; Long, Hanna; Alawneh, John I

The goal of the study was to evaluate alternative student-centered approaches that could replace autopsy sessions and live demonstration and to explore refinements in assessment procedures for standardized cardiac dissection. Simulators and videos were identified as feasible, economical, student-centered teaching methods for technical skills training in medical contexts, and a direct comparison was undertaken. A low-fidelity anatomically correct simulator approximately the size of a horse's heart with embedded dissection pathways was constructed and used with a series of laminated photographs of standardized cardiac dissection. A video of a standardized cardiac dissection of a normal horse's heart was recorded and presented with audio commentary. Students were allowed to nominate a preference for learning method, and students who indicated no preference were randomly allocated to keep group numbers even. Objective performance data from an objective structure assessment criterion and student perception data on confidence and competency from surveys showed both innovations were similarly effective. Evaluator reflections as well as usage logs to track patterns of student use were both recorded. A strong selection preference was identified for kinesthetic learners choosing the simulator and visual learners choosing the video. Students in the video cohort were better at articulating the reasons for dissection procedures and sequence due to the audio commentary, and student satisfaction was higher with the video. The major conclusion of this study was that both methods are effective tools for technical skills training, but consideration should be given to the preferred learning style of adult learners to maximize educational outcomes.

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

Increasing Student Interaction in Technical Writing Courses in Online Environments

ERIC Educational Resources Information Center

Virtue, Drew

2017-01-01

This article examines how the levels of student interaction change through the use of small groups and moderators in online writing courses. The study examines three technical and professional online writing courses: one course that employs small groups and group moderators and two courses that have no small groups or moderators. The results of…

Why Did You Stay?: A Case Study of Male Student Persistence in Technical College

ERIC Educational Resources Information Center

Froehlich-Mueller, Kerry

2017-01-01

The purpose of this qualitative case study was to explore male student persistence at Central Technical College (CTC), a small public, two-year technical college in Wisconsin. Across the United States, there had been a surge in college enrollments during the recent recession. Interestingly, college enrollment and persistence of females has grown…

Academic Performance of Students during Transition Period before Choice of Disciplines in Nigeria Certificate in Education (Technical) Programme

ERIC Educational Resources Information Center

Amasuomo, Japo Oweikeye

2015-01-01

The study examined the academic performance of students in the compulsory courses in technical education during the transition period of first and second years of three years Nigeria Certificate in Education (NCE) Technical programme before choosing their disciplines in the third year. The study comprised of 237 students that consisted of…

Fiscal year 1977 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1977-01-01

This bibliography lists 78 NASA technical memoranda, notes, papers, and reports presented by Marshall Space Flight Center personnel in FY 1977. In addition, 525 papers by contractors to that facility are cited along with 129 papers cleared for presentation.

Students' Presentations: Does the Experience Change Their Views?

ERIC Educational Resources Information Center

Sander, Paul; Sanders, Lalage

2005-01-01

Introduction: Research has shown that students do not like student presentations, yet a case can be made for them. This study seeks to understand the effects that presentations have on students. Method: Within an action research framework, two repeated-measures studies were completed, one with students undertaking assessed presentations the other…

Writing the Trenches: What Students of Technical Writing and Literature Can Learn Together

ERIC Educational Resources Information Center

Baake, Ken; Shelton, Jen

2017-01-01

We argue for a course in which students analyze writing about a common topic--in this case World War I--from multiple genres (e.g., poetry and technical manuals). We address the divide between instruction in pragmatic and literary writing and calls to bridge that gap. Students working in disparate areas of English learn the strengths and the…

Information Systems as a Social Space: Collaborative Teaching of Social Literacies to Technical Students

ERIC Educational Resources Information Center

Kalil, Claudia; Monson, Jo; Nodoba, Gaontebale

2010-01-01

This article describes a successful experimental collaborative teaching project to deliver a short course to develop work-relevant social literacies in technical students. Heterogeneous work contexts require both students and educators to find ways to integrate thinking and practices across disciplines. Teaching social literacies to information…

Students' Strengths and Weaknesses in Evaluating Technical Arguments as Revealed through Implementing Calibrated Peer Review™ in a Bioengineering Laboratory

ERIC Educational Resources Information Center

Volz, Tracy; Saterbak, Ann

2009-01-01

In engineering fields, students are expected to construct technical arguments that demonstrate a discipline's expected use of logic, evidence, and conventions. Many undergraduate bioengineering students struggle to enact the appropriate argument structures when they produce technical posters. To address this problem we implemented Calibrated Peer…

Homonegativity in the Technical and Vocational Track: A Survey of Secondary School Students in Flanders

ERIC Educational Resources Information Center

Aerts, Saskia; Dewaele, Alexis; Cox, Nele; Van Houtte, Mieke

2014-01-01

Students from the technical and vocational track in Flanders have more homonegative attitudes than other students. We investigate what explains this track difference and if the homonegativity is reflected in more bullying experiences by lesbian, gay, and bisexual (LGB) students in these tracks. The results show that sex-role ideology and religion…

Use of Learner-Centered Strategies in the Preparation of Community and Technical College Leaders: Assessments by Participating Doctoral Students

ERIC Educational Resources Information Center

Browne-Ferrigno, Tricia; Muth, Rodney

2010-01-01

This paper presents assessments by students actively engaged in a recently redesigned Doctor of Education (EdD) program, delivered at a research-extensive university participating in the the Carnegie Project on the Education Doctorate (CPED), to prepare leaders for a statewide system of community and technical colleges. Because a unique feature of…

Figures and First Years: Examining first-year Calculus I student ability to incorporate figures into technical reports

NASA Astrophysics Data System (ADS)

Antonacci, Nathan; Rogers, Michael; Pfaff, Thomas

This three-year study focused on first-year Calculus I students and their abilities to incorporate figures into technical reports. Students were handed guidelines as part of their Multidisciplinary Sustainability Education Module meant to aid them in crafting effective figures. Figure-specific questionnaires were added in the class to gain insight into the quantitative literacy skills students possessed both before starting their course and after its completion. Reviews of the figures in 78 technical reports written by 106 students showed repeated failure to refer to figures in discussion sections and use them in evidence-based arguments. Analysis of quantitative literacy skills revealed that the students could both read and interpret figures, suggesting that issues with literacy were not the main contributor to the sub-par graphs.

Integrating Technical Communication in the Mechanical Engineering Curriculum

NASA Astrophysics Data System (ADS)

Norberg, Seth; Ashcraft, Timothy; van Poppel, Bret

2017-11-01

Technical communication is essential to engineering practice, but these skills can be challenging to teach and assess in the classroom. Instructors in the Mechanical Engineering (ME) program at the United States Military Academy are developing new learning exercises to prepare students for success in their capstone design course and beyond. In this paper we highlight the recent successes and lessons learned from two courses: junior-level Thermal-Fluid Systems and the senior-level ME Seminar. Both courses support the newly implemented West Point Writing Program (WPWP), an institutional, writing-across-the-curriculum program. The junior course incorporates four hands-on experiments, which provide an abundance of data for students to analyze, assess, and present. In the senior course the majority of the content that students present is from their ongoing capstone design projects. Between the two courses, students craft essays, lab reports, short summaries, posters, quad charts, and technical presentations. Both courses include peer evaluation, revision exercises, and timed (on demand) writing assignments. The junior course includes assignments co-authored by a group as well as an individual report. An overview of both courses' assignments with course-end feedback from the students and the faculty is provided. Strengths and weaknesses are identified and recommendations for instructors seeking to implement similar technical communications assignments in their own courses are presented.

Low-Income Students and School Meal Programs in California. Technical Appendices

ERIC Educational Resources Information Center

Danielson, Caroline

2015-01-01

These technical appendices are intended to accompany the study, "Low-Income Students and School Meal Programs in California." Two appendices are included. Appendix A provides tables detailing: (1) the variables included in the main models and the datasets(s) used to construct each; (2) observations in each dataset and categorizes them…

A Five-Year Follow-Up of Students Enrolled in Post-Secondary Vocational-Technical-Transfer Programs.

ERIC Educational Resources Information Center

Noeth, Richard J.; Hanson, Gary R.

The nationwide study examines career behavior patterns and work orientations of students five years after they began vocational-technical transfer programs at community colleges, technical schools, and similar kinds of institutions in the fall of 1970. The study sample consisted of 4,350 individuals selected from the national norm group who…

FY 1978 scientific and technical reports, articles, papers, and presentations. [bibliography

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1978-01-01

Abstracts of 73 technical papers published or presented by MSFC personnel in FY-78 are presented. In addition, over 400 papers by contractors to that facility are listed along with the STAR document number for each report. Titles of 208 additional papers already cleared for publication are included.

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

Development of technical skills in Electrical Power Engineering students: A case study of Power Electronics as a Key Course

NASA Astrophysics Data System (ADS)

Hussain, I. S.; Azlee Hamid, Fazrena

2017-08-01

Technical skills are one of the attributes, an engineering student must attain by the time of graduation, as per recommended by Engineering Accreditation Council (EAC). This paper describes the development of technical skills, Programme Outcome (PO) number 5, in students taking the Bachelor of Electrical Power Engineering (BEPE) programme in Universiti Tenaga Nasional (UNITEN). Seven courses are identified to address the technical skills development. The course outcomes (CO) of the courses are designed to instill the relevant technical skills with suitable laboratory activities. Formative and summative assessments are carried out to gauge students’ acquisition of the skills. Finally, to measure the attainment of the technical skills, key course concept is used. The concept has been implemented since 2013, focusing on improvement of the programme instead of the cohort. From the PO attainment analysis method, three different levels of PO attainment can be calculated: from the programme level, down to the course and student levels. In this paper, the attainment of the courses mapped to PO5 is measured. It is shown that Power Electronics course, which is the key course for PO5, has a strong attainment at above 90%. PO5 of other six courses are also achieved. As a conclusion, by embracing outcome-based education (OBE), the BEPE programme has a sound method to develop technical psychomotor skills in the degree students.

Colorado Student Assessment Program Technical Report, 2000.

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

This report presents the results of the statewide spring 2000 administration of the Colorado Student Assessment Program (CSAP). Third-grade students were assessed in Reading; fourth- and seventh-grade students were assessed in Reading and Writing; and eighth-grade students were assessed in Mathematics and Science. The assessments were developed by…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series C (Third Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-five lesson plans designed for a third-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series D (Fourth Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-seven lesson plans designed for a fourth-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Curriculum Integration: Helping Career and Technical Education Students Truly Develop College and Career Readiness

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Richardson, George B.

2017-01-01

All students need to learn how to read, write, solve mathematics problems, and understand and apply scientific principles to succeed in college and/or careers. The challenges posed by entry-level career fields are no less daunting than those posed by college-level study. Thus, career and technical education students must learn effective math,…

Technical College Instructors' Perceptions of the Impact of Online Readiness and of Student Support Services on Student Success in Online Courses

ERIC Educational Resources Information Center

Dowd, Nathan

2012-01-01

The purpose of this study is to determine how Wisconsin Technical College (WTCS) administrators and online instructors perceive the impact of online learner readiness and student support services to be on student success in online courses. The study used a modified three-round Delphi technique to determine to collect data. The results indicated…

Career and Technical Education, Inclusion, and Postsecondary Outcomes for Students with Disabilities. Working Paper 177

ERIC Educational Resources Information Center

Theobald, Roddy; Goldhaber, Dan; Gratz, Trevor; Holden, Kristian L.

2017-01-01

We use longitudinal data on all high school students in Washington State, including postsecondary education and workforce outcomes, to investigate predictors of intermediate and postsecondary outcomes for students with disabilities. We pay particular attention to career and technical education (CTE) enrollment and the extent of inclusion in…

Assessing the Impact of First-Year Experience Courses on Student Success in Community and Technical Colleges

ERIC Educational Resources Information Center

Robertson, Luv'Tesha L.

2016-01-01

This study examined the impact first-year experience courses have on first-year student performance when enrolled in these courses at public community and technical colleges in Kentucky. The target population for this research study was composed of freshman students participating in the course compared to students not participating in the same…

Sense of Community in Student Retention at a Tertiary Technical Institution in Bogotá: An Ecological Approach

ERIC Educational Resources Information Center

Mendoza, Pilar; Suarez, Juan Diego; Bustamante, Eileen

2016-01-01

Objective: This study probes the reasons for high attrition rates and sense of community among students enrolled at a technical institution serving low-income students in Bogotá, Colombia. Although sense of community on campus is the strongest predictor of a student's thriving, scholars in higher education have studied mainly minority students'…

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

Handling the Difficulties of Technical School Students in the Construction and Interpretation of Graphic Representations

ERIC Educational Resources Information Center

Marinos, Andreas

2010-01-01

In this work, an attempt is made to evaluate the errors that have to do with the interpretation and construction of graphic representations. Although the students are studying in the second year of technical high school (secondary education), i.e. in schools with an emphasis in technical subjects (post junior secondary), it is observed that they…

The Effects of Curriculum Integration on the Academic Achievement of Secondary Career and Technical Students

ERIC Educational Resources Information Center

Jones, Patricia Anders

2012-01-01

Using a causal-comparative design, this quantitative study investigated whether or not the curriculum integration of academic subjects with career and technical education classes affected secondary students' academic performance as assessed by scores on standardized tests. The purposive sample was drawn from students in Trade and Industry classes…

Tinkering and Technical Self-Efficacy of Engineering Students at the Community College

ERIC Educational Resources Information Center

Baker, Dale R.; Wood, Lorelei; Corkins, James; Krause, Stephen

2015-01-01

Self-efficacy in engineering is important because individuals with low self-efficacy have lower levels of achievement and persistence in engineering majors. To examine self-efficacy among community college engineering students, an instrument to specifically measure two important aspects of engineering, tinkering and technical self-efficacy, was…

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

NASA Astrophysics Data System (ADS)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Web-Conferencing: An Analysis of Course Delivery Systems on Student Achievement at a Technical College

ERIC Educational Resources Information Center

Stanford, Roger John

2012-01-01

Web-conferencing software was chosen for course delivery to provide flexible options for students at a two-year technical college. Students used technology to access a live, synchronous microeconomics course over the internet instead of a traditional face-to-face lecture. This investigation studied the impact of implementing web-conferencing…

An Assessment of Future Educational and Occupational Plans for Brevard Community College Technical Program Students.

ERIC Educational Resources Information Center

Whitehead, Everett

This practicum studies the future educational and/or occupational plans of 223 technical program students enrolled in Brevard Community College (BCC) during the Fall 1973 term in order to suggest adjustments in college procedures to facilitate student transition to continued college or to their chosen professions. The characteristics of technical…

Student Perceptions on the Impact of Career and Technical Education Programs: A Mixed-Methods Study

ERIC Educational Resources Information Center

Eimers, Kimberly

2017-01-01

This mixed-methods study analyzed student perceptions regarding the impact of career and technical education (CTE) programs on student engagement, mind-set, support of teachers, and school climate. The Tripod 7C instrument was utilized to gather quantitative data, while focus groups were utilized for gathering qualitative data. Survey results…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. B (Second Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-eight lesson plans designed for a second-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

PubMed

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

Career and Technical Education, Inclusion, and Postsecondary Outcomes for Students With Learning Disabilities.

PubMed

Theobald, Roddy J; Goldhaber, Dan D; Gratz, Trevor M; Holden, Kristian L

2018-05-01

We used longitudinal data from Washington State to investigate the relationships among career and technical education (CTE) enrollment, inclusion in general education, and high school and postsecondary outcomes for students with learning disabilities. We replicated earlier findings that students with learning disabilities who were enrolled in a "concentration" of CTE courses had higher rates of employment after graduation than observably similar students with learning disabilities who were enrolled in fewer CTE courses. We also found that students with learning disabilities who spent more time in general education classrooms in high school had higher rates of on-time graduation, college attendance, and employment than observably similar students with learning disabilities who spent less time in general education classrooms in these grades.

Evaluation of the Student Engagement Process in a Criminal Justice Program at a Technical College

ERIC Educational Resources Information Center

Totzke, Martin W.

2007-01-01

This applied dissertation was an evaluation of the student engagement practices offered to students in a criminal justice program at a Midwestern technical college. The problem was that an evaluation of the practices had not been conducted to provide data to indicate whether the current practices were effective. The researcher developed an…

"Surgery interrupted": The effect of multitasking on cognitive and technical tasks in medical students.

PubMed

Evans, C H; Schneider, E; Shostrom, V; Schenarts, P J

2017-02-01

Today's medical learners are Millennials, and reportedly, multitasking pros. We aim to evaluate effect of multitasking on cognitive and technical skills. 16 medical students completed a mock page and laceration closure separately on day 1 and day 13, and in parallel on day 14. Suturing was graded using GRS and mock pages scored. Total time, suturing and loading times, and percent correct on mock page were compared. Percent correct on mock page improved from days 1-13 and 14 (p < 0.01 and 0.04). GRS improved from days 1-13 and 14 (p = 0.04 and <0.01). Total time suturing was similar on all days. However, time suturing during the mock page on day 14 was prolonged compared to before mock page (p = 0.01). Medical students can complete cognitive and technical tasks in parallel, without compromising acceptability. However, multitasking results in longer times to complete the complex component of the technical task. Copyright © 2016 Elsevier Inc. All rights reserved.

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. A (First Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for thirty-six lessons designed for a first-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each lesson.…

Differences between General and Talented Students' Perceptions of Their Career and Technical Education Experiences Compared to Their Traditional High School Experiences

ERIC Educational Resources Information Center

Gentry, Marcia; Peters, Scott J.; Mann, Rebecca L.

2007-01-01

Career and technical education represents an important and understudied educational option for high school students. This qualitative study utilized data from one exemplary career and technical education (CTE) center to address the question of how talented and general education students' part-time CTE experiences differed from their traditional…

Identifying Students' Difficulties When Learning Technical Skills via a Wireless Sensor Network

ERIC Educational Resources Information Center

Wang, Jingying; Wen, Ming-Lee; Jou, Min

2016-01-01

Practical training and actual application of acquired knowledge and techniques are crucial for the learning of technical skills. We established a wireless sensor network system (WSNS) based on the 5E learning cycle in a practical learning environment to improve students' reflective abilities and to reduce difficulties for the learning of technical…

The Use of Virtual Reality Simulation to Improve Technical Skill in the Undergraduate Medical Imaging Student

ERIC Educational Resources Information Center

Gunn, Therese; Jones, Lee; Bridge, Pete; Rowntree, Pam; Nissen, Lisa

2018-01-01

In recent years, simulation has increasingly underpinned the acquisition of pre-clinical skills by undergraduate medical imaging (diagnostic radiography) students. This project aimed to evaluate the impact of an innovative virtual reality (VR) learning environment on the development of technical proficiency by students. The study assessed the…

An approach to developing independent learning and non-technical skills amongst final year mining engineering students

NASA Astrophysics Data System (ADS)

Knobbs, C. G.; Grayson, D. J.

2012-06-01

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called 'soft' skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to 'soft' skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased.

Age at first intercourse in an Australian national sample of technical college students.

PubMed

Grunseit, A C; Richters, J

2000-02-01

This study aims to broaden the current body of knowledge regarding the sexual behaviour of young Australians by examining the age and correlates of age of first intercourse in a national sample of Technical and Further Education apprentices. In 1995, students at randomly selected technical colleges in Australia were surveyed on HIV-related issues. Questionnaires were administered to a stratified cluster sample of automotive, hairdressing and commercial cookery apprentices. Respondents were asked the age at which they first had heterosexual vaginal or anal intercourse. Of 4,055 respondents aged 15-24 years, 3,848 answered the question; 3,195 (83%) had had intercourse. Males and females did not differ significantly. Median age at first intercourse was 16 (range 12-23). In multivariate analysis, older age at first intercourse was associated with: greater age at interview; higher school education; church attendance; and State of residence. The model, however, accounted for only 14% of the variance in age at first intercourse. In this sample, those apprentices who completed secondary school became sexually active later on average than those who left before the end of Year 10. For sex education to occur before sexual initiation, it needs to be offered in primary schools and the first year of high school (aged 11-13 years). Further, as technical college students are likely to initiate sex earlier than their age mates still at school, colleges may be in a position to take responsibility for the continuing sexual education of this group, especially for those students entering college at 15 or 16 years of age.

Astronomy Instruction at a Two-year Technical College

NASA Astrophysics Data System (ADS)

Sirola, C. J.

2000-12-01

Over half of all students now begin their college careers at two-year institutions (technical colleges, junior colleges, vocational schools, etc.). This shift in student demographics has broad implications for college-level science instruction, including astronomy instruction. We compare astronomy instruction at two-year institutions to that at traditional four-year universities. A typical two-year school like Tri-County Technical College profers challenges not typically faced by research universities such as lack of research funding, little equipment or facilities, and a generally lower level of student ability. Conversely, a Tri-County Tech offers opportunities such as extensive training in teaching methodologies, a wide range of student demographics, and small classroom sizes. Our students are rarely interested in astronomy as a major, but instead take astronomy to fulfill other major requirements or to ensure the transfer of science credits to four-year universities. We present several examples of astronomy instruction at Tri-County Technical College and discuss our philosophy of teaching in a post-secondary environment whose enrollment is on the rise.

Electronic Communities: a Forum for Supporting Women Professionals and Students in Technical and Scientific Fields

NASA Astrophysics Data System (ADS)

Single, Peg Boyle; Muller, Carol B.; Cunningham, Christine M.; Single, Richard M.

In this article, we report on electronic discussion lists (e-lists) sponsored by MentorNet, the National Electronic Industrial Mentoring Network for Women in Engineering and Science. Using the Internet, the MentorNet program connects students in engineering and science with mentors working in industry. These e-lists are a feature of MentorNet's larger electronic mentoring program and were sponsored to foster the establishment of community among women engineering and science students and men and women professionals in those fields. This research supports the hypothesis that electronic communications can be used to develop community among engineering and science students and professionals and identifies factors influencing the emergence of electronic communities (e-communities). The e-lists that emerged into self-sustaining e-communities were focused on topic-based themes, such as balancing personal and work life, issues pertaining to women in engineering and science, and job searching. These e-communities were perceived to be safe places, embraced a diversity of opinions and experiences, and sanctioned personal and meaningful postings on the part of the participants. The e-communities maintained three to four simultaneous threaded discussions and were sustained by professionals who served as facilitators by seeding the e-lists with discussion topics. The e-lists were sponsored to provide women students participating in MentorNet with access to groups of technical and scientific professionals. In addition to providing benefits to the students, the e-lists also provided the professionals with opportunities to engage in peer mentoring with other, mostly female, technical and scientific professionals. We discuss the implications of our findings for developing e-communities and for serving the needs of women in technical and scientific fields.

Drawing on Technical Writing Scholarship for the Teaching of Writing to Advanced ESL Students--A Writing Tutorial

ERIC Educational Resources Information Center

Zielinska, Dorota

2003-01-01

The article outlines the technical writing tutorial (TWT) that preceded an advanced ESL writing course for students of English Philology at the Jagiellonian University. Having assessed the English skills of those students at the end of the semester, we found a statistically significant increase in the performance of the students who had taken the…

Revising the IDEA Student Ratings of Instruction System 2002-2011 Data. IDEA Technical Report No. 18

ERIC Educational Resources Information Center

Benton, Stephen L.; Li, Dan; Brown, Ron; Guo, Meixi; Sullivan, Patricia

2015-01-01

This report describes the processes undertaken to revise the IDEA Student Ratings of Instruction (SRI) system. The previous revision occurred in 1999, as described in IDEA Technical Report No. 11, "Revising the IDEA System for Obtaining Student Ratings of Instructors and Courses" (Hoyt, Chen, Pallett, & Gross, 1999). The procedures…

[Structural Equation Modeling on Smoking Cessation Intention in Male Technical High School Students].

PubMed

Do, Eun Su; Choi, Eunsuk

2017-04-01

This study was done to develop and test a structural model on smoking cessation intention in technical high school men. The conceptual model was based on the theory of reasoned action and health promotion model. From May 29 to April 13, 2015, 413 technical high school students who smoked completed a structured questionnaire. Data were analyzed to calculate the direct and indirect effects of factors affecting smoking cessation intention. The SPSS WIN 20.0 and AMOS 21.0 programs were used. The hypothetical model was a good fit for the data. The model fit indices were χ²/df=2.36, GFI=.95, AGFI=.92, NFI=0.97, and RMSEA=.05. Self-esteem had direct and indirect effects on smoking cessation intention. Attitude, subjective norm, and self-efficacy had direct effects on smoking cessation intention. Smoking knowledge and environmental factor had indirect effects on smoking cessation intention. This model explained 87.0% of the variance in smoking cessation intention. These results indicate that technical high school students' intention to stop smoking can be improved through an increase in self-esteem, negative environmental factors, attitude toward smoking cessation, subjective norm about smoking cessation, and self-efficacy for smoking cessation. © 2017 Korean Society of Nursing Science

Teachers' modeling advantage and their modeling effects on college students' learning styles and occupational stereotypes: a case of collaborative teaching in technical courses.

PubMed

Chiou, Wen-Bin; Yang, Chao-Chin

2006-01-01

In this study, modeling advantage that depicts the likelihood of a teacher model being imitated by students over other competing models in a particular class was developed to differentiate the rival modeling of two kinds of teachers (the technical teachers vs. the lecturing teachers) between college students' learning styles and occupational stereotypes in the collaborative teaching of technical courses. Results of a one-semester longitudinal study indicated that the students perceived a greater modeling advantage of the technical teachers than that of the lecturing teachers. Both the students' learning styles and occupational stereotypes were in accordance with those teachers as their role models. In general, the impact of the teachers' learning styles and occupational stereotypes on students appeared to be mediated by the teachers' modeling advantage. Administrators and curriculum designers should pay attention to the fact that the technical teachers appeared to exhibit greater modeling effects than the lecturing teachers in collaborative teaching.

Scientific and technical papers presented or published by JSC authors in 1986

NASA Technical Reports Server (NTRS)

1987-01-01

A compilation of Lyndon B. Johnson Space Center contributions to the scientific and technical literature in aerospace and life sciences made during calender year 1985 is presented. Citations include NASA formal series reports, journal articles, conference and symposium presentations, papers published in proceedings or other collective works, and seminar and workshop results.

Vocational-Technical Education: A Plan for Monroe County, Florida.

ERIC Educational Resources Information Center

Mills, Hugh L., Sr., Ed.; Pilcher, Palmer, C., Ed.

Suggested vocational-technical education programs for the Monroe County Florida school system are presented along with recommendations to implement the principle of coordinated career education in the public schools. Expansion of vocational-technical programs is emphasized to expose all students from kindergarten through Grade 12 to career…

Development of a Situated Spectrum Analyzer Learning Platform for Enhancing Student Technical Skills

ERIC Educational Resources Information Center

Chuang, Chien-Pen; Jou, Min; Lin, Yen-Ting; Lu, Cheng-Tien

2015-01-01

Electronic engineering industries require technical specialists to operate precision electronic instruments. However, limitations in course designs and equipment availability mean that only a few students are able to use the equipment in practical lessons within a limited timeframe. Also, instruction of techniques and skills are still mostly…

Gender in School-to-School Transitions: How Students Choose Career Programs in Technical Colleges in Kenya.

ERIC Educational Resources Information Center

Kithyo, Isaac Mattemu; Petrina, Stephen

2002-01-01

A study of 39 technical college students in Kenya found the majority enrolled in gender-traditional programs. Although school facilities, guidance, and labor market orientation played a part, gender was the most persuasive factor in career choice. Parental pressure and stereotypical guidance reinforced gender norms, but some students were able to…

Development and implementation of a technical and didactical training program for student tutors in the dissection course.

PubMed

Shiozawa, Thomas; Hirt, Bernhard; Celebi, Nora; Baur, Friederike; Weyrich, Peter; Lammerding-Köppel, Maria

2010-12-20

student tutors have a long tradition in gross anatomy instruction. However, the full potential of the tutors is generally not tapped, since little attention is paid to their technical and didactical training. The aim of this paper is to report a systematic approach to the development, didactic reasoning and implementation of a curriculum for training student tutors in gross anatomy. the training program was developed using the six-step approach of Kern's curriculum development model. For needs assessment, the literature research was amended by a survey among the 1st and 2nd year students of the dissection course (n=167) and two independent 90 min focus group interviews with the tutors who supervised these students (n=15). Protocols were transcribed and analyzed by margin coding. The training curriculum was setup on the basis of these data. corresponding to the literature, the students want student tutors with good teaching competence as well as adequate content knowledge and technical competence. Supporting that, the tutors request a training program enhancing their didactic skills as well as their knowledge of content and working using relevant methods. Thus, a combined didactic and professional training program has been developed. Six professional and 11 didactic learning objectives were defined. A 3 weeks training curriculum was implemented, using microteaching and group exercises for didactics and active dissection for technical training. Both parts were interlocked on a contextual and practical level. our focus group analyses revealed that a specific training program for student tutors in the dissection course is necessary. We describe a feasible task-oriented training curriculum combining didactic and professional objectives. 2010. Published by Elsevier GmbH.

Student Displacement in Louisiana after the Hurricanes of 2005: Experiences of Public Schools and Their Students. Technical Report

ERIC Educational Resources Information Center

Pane, John F.; McCaffrey, Daniel F.; Tharp-Taylor, Shannah; Asmus, Gary J.; Stokes, Billy R.

2006-01-01

The purpose of this technical report is to provide timely documentation of many of the short-term effects of the movements of students that occurred as part of the displacement of storm victims. The report will help guide educators and policymakers in their ongoing responses to this disaster and preparations for future events. Focusing on the…

The Implication of Student Voice on Career and Technical Education Career Academy Retention

ERIC Educational Resources Information Center

Conti, Erin Michelle

2014-01-01

Career and Technical Education (CTE) contains not only the "traditional" trade programs such as cosmetology, and carpentry, but also career academies, which marry hands on learning with an academically rigorous curriculum that prepares students for a post-secondary education. My district, like many other CTE districts with academies,…

Final Technical Report on the Institute for Advanced Study in Student Personnel Work.

ERIC Educational Resources Information Center

Callis, Robert

This document reports the planning, implementation, and evaluation of a 9-month institute held at the University of Missouri-Columbia to prepare participants (approximately 20) for leadership positions in student personnel work at junior colleges and technical institutes. The following aspects of the instructional program are discussed and…

Effects of Think-Aloud Pair Problem Solving on Secondary-Level Students' Performance in Career and Technical Education Courses

ERIC Educational Resources Information Center

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of think-aloud pair problem solving (TAPPS) on the troubleshooting performance of 34 secondary-level career and technical education students. There was no significant difference in success rate between TAPPS students and students who worked alone…

High school students presenting science: An interactional sociolinguistic analysis

NASA Astrophysics Data System (ADS)

Bleicher, Robert

Presenting science is an authentic activity of practicing scientists. Thus, effective communication of science is an important skill to nurture in high school students who are learning science. This study examines strategies employed by high school students as they make science presentations; it assesses students' conceptual understandings of particular science topics through their presentations and investigates gender differences. Data are derived from science presentation given by eight high school students, three females and five males who attended a summer science program. Data sources included videotaped presentations, ethnographic fieldnotes, interviews with presenters and members of the audience, and presenter notes and overheads. Presentations were transcribed and submitted to discourse analysis from an interactional sociolinguistic perspective. This article focuses on the methodology employed and how it helps inform the above research questions. The author argues that use of this methodology leads to findings that inform important social-communicative issues in the learning of science. Practical advice for teaching students to present science, implications for use of presentations to assess conceptual learning, and indications of some possible gender differences are discussed.Received: 14 April 1993; Revised: 15 February 1994;

Navy Technical Information Presentation System (NTIPS) Test and Implementation Strategy

DTIC Science & Technology

1981-12-01

IC AROEROCK I NAOI S ~ i P RF R M N C AVI AT OIO N A N DDEPARTMENT STIPRUCTRMNES COMPUATIONAN DEPARTMENT -MATHEMATICS AND 17 LOGISTICS DEPARTMENT leI...and Subtitle) S . TYPE OF REPORT & PERIOD COVERED NAVY TECHNICAL INFORMATION PRESENTATION Final SYSTEM (NTIPS) TEST AND IMPLEMENTATION 6. PERFORMING...CLASSIFICATION OP THIS PAGE (1nor. Data Enteed) ock 20 continued) system operation, training, maintenance, and logistics support. This system was

Technical Papers Presented at the 1971 NAB Engineering Conference. First Edition.

ERIC Educational Resources Information Center

1971

This collection of 25 papers and panels presented at the 1971 Engineering Conference of the National Association of Broadcasters surveys recent technical developments in the field. At least four of these papers are relevant to education. "Everything You Wanted to Know About Cartridge Machines--But Were Afraid to Ask" describes improvements in…

Increasing student confidence in technical and professional skills through project based learning

NASA Astrophysics Data System (ADS)

Robinson, Alice L.

This work focuses on developing undergraduate students' technical and professional skills through a project-based spiral curriculum in the Agricultural & Biological Engineering department at Purdue that can be implemented campus wide. Through this curriculum, Purdue engineers will be prepared for leadership roles in responding to the global technological, economic, and societal challenges of the 21st century by exposure to the relationships between engineering and its impacts on real world needs and challenges. Project-based learning uses projects as the focus of instruction and has shown increased understanding, motivation, and confidence through application of engineering principles to real-world problems. The strength of a spiral curriculum is that it continually revisits basic ideas and themes with increasing complexity and sophistication. The proposed spiral curriculum incorporates the target attributes of the Purdue Engineer of 2020 through project based courses during sophomore, junior, and senior year. These courses will build on concepts taught during first year engineering as well. The Engineer of 2020 (NAE and Purdue) target attributes include strong technical and professional skills to solve societal and technological burdens. A prototype course has been developed, taught, and evaluated during the previous two fall semesters in the sophomore level of the Biological and Food Process Engineering curriculum. The target students met 3 hours a week in a traditional lecture setting plus 2 hours a week in a project based lab setting. The control group met only 3 hours a week in a traditional lecture setting. Peer and self assessment results from student surveys show increased confidence in every area surveyed. Focus groups revealed student reactions to the course. Students enjoyed the course but felt it difficult to handle ambiguity with project work. Future work includes course revisions to the content, assessment, and pedagogy of the prototype class

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 26: The technical communication practices of aerospace engineering students: Results of the phase 3 AIAA National Student Survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of aerospace engineering students. The reported data were obtained from a survey of student members of the American Institute of Aeronautics and Astronautics (AIAA). The survey was undertaken as a phase 3 activity of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance; use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Making Technical Theatre Matter: How To Give Tech Students the Respect They Deserve.

ERIC Educational Resources Information Center

McClatchey, Margaret

2001-01-01

Outlines things to do throughout the year to develop and keep responsible technical theater staff, including praise, matching the right students to the right jobs, hiring professionals to advise when necessary, and appointing crew heads and creating tech crews. Argues that raising status of theater technicians and delegating genuinely important…

High School Students Presenting Science: An Interactional Sociolinguistic Analysis.

ERIC Educational Resources Information Center

Bleicher, Robert

1994-01-01

This study examines strategies employed by students as they make science presentations; assesses student's conceptual understandings of particular science topics; and investigates gender differences. Focuses on the methodology employed and how it helps inform these goals. Advice for teaching students to present science, implications for use of…

The Internet as a Platform for Student Presentations

NASA Astrophysics Data System (ADS)

Ponomarenko, A. L.

2003-12-01

As the number of students enrolled in colleges and universities across the country increases, both class size and faculty workloads also increase, and individual students slip through wider and wider cracks. Universities are moving toward web-based technology as a way to facilitate student learning in an academic environment that is growing and changing faster than ever. Faculty web pages, hosted by the faculty's own internet provider, by the university, or by national services such as Blackboard or WebCT, are often used to bridge the gap between faculty and students. Typically, faculty web pages are used to post syllabi and announcements, to distribute course notes, and to disseminate student grades, while email replaces office hours as the preferred method of communication. While this use of the internet has already begun to transform course instruction, it represents only the simplest use of a tool that has tremendous potential, both in and out of the classroom. The internet can be used to bring back the element of personalization that is quickly lost as class size continues to grow. Much of the material covered in large introductory science classes is completely new to students, and they have trouble visualizing new concepts and placing them in context. In smaller classes, a solution might be to assign papers or projects to help students become familiar with the new concepts and new ideas. This is neither feasible nor terribly effective in large lecture courses. With the innovative use of web-based technology, student presentations as a method of learning can be reinvented, with greater impact for each student. Additional use of internet-based discussions and chats enables each student to experience many of their classmate's presentations in addition to their own. This use of the web as a media for storage and presentation of student projects is well-liked by students. They are able to work together on projects in large classes otherwise closed to such activity

Comparing Achievement Trends in Reading and Math across Arizona Public School Student Subgroups. REL Technical Brief. REL 2012-No. 019

ERIC Educational Resources Information Center

Crane, Eric W.; Huang, Min; Barrat, Vanessa X.

2011-01-01

This technical brief examines the 2008/09 reading and math proficiency levels among subgroups of Arizona public school students defined by students' race/ethnicity (American Indian, Asian, Black, Hispanic, and White), English language learner status (English language learner students and non-English language learner students), disability status…

Supporting Student Presentations and Participation at Professional Conferences

ERIC Educational Resources Information Center

McGuire, Margaret A.; Simpson, Cynthia; Duke, Lindsay Nicole

2009-01-01

Mentoring early childhood education students who are preparing to attend and make presentations at a conference can be rewarding for all involved. Often, students present current research they have conducted or share specific expertise in areas such as lesson planning, learning materials, or fund-raising. Successful mentoring, leading to…

Moving towards Ethnorelativism: A Framework for Measuring and Meeting Students' Needs in Cross-Cultural Business and Technical Communication

ERIC Educational Resources Information Center

Wang, Junhua

2013-01-01

Scholars in business and technical communication have continuously made efforts to look for effective teaching approaches for cross-cultural business and technical communication; however, little research has been conducted to study the process by which students develop intercultural competence; fewer studies have been conducted to assess learners'…

An interactive online approach to small-group student presentations and discussions.

PubMed

Thor, Der; Xiao, Nan; Zheng, Meixun; Ma, Ruidan; Yu, Xiao Xi

2017-12-01

Student presentations had been widely implemented across content areas, including health sciences education. However, due to various limitations, small-group student presentations in the classroom may not reach their full potential for student learning. To address challenges with presentations in the classroom, we redesigned the assignment by having students present and discuss online using VoiceThread, a cloud-based presentation and discussion tool. First-year students pursuing a Doctor of Dental Surgery degree were assigned into small groups to present physiology content and to discuss that content online. This assignment was similar to traditional student classroom presentations, with the exception that the entire assignment was conducted online. The primary purpose of this exploratory study was to investigate the impact of the online format on the discussion quality. Another purpose of the study was to examine students' perceptions of using VoiceThread for presenting and learning, as well as the online interactions between the presenter and audience. Students posted a higher number of questions and comments than required by the assignment. The questions from students were also higher level questions, and the answers to these questions were more thorough compared with what we had previously observed in classroom presentations. The survey results showed that students preferred using VoiceThread for presenting, learning from other presentations, and discussing presentation content over performing this process in the classroom. Preliminary findings suggested that having dental students make presentations and hold discussions online might help address the challenges of student presentations in the classroom. Copyright © 2017 the American Physiological Society.

Teachers' Perceptions and Students' Lived Experiences in Vocational-Technical Subjects in a Rural High School in Zimbabwe

ERIC Educational Resources Information Center

Masinire, Alfred

2015-01-01

This paper explores the construction of dominant models of gender among students in the Vocational-Technical. In the backdrop of dominant narratives that structure gender policies and practices in schooling in Zimbabwe, the paper elaborates upon how students' daily experiences in workrooms perpetuate the feminisation and masculinisation of fields…

Web Based Technical Problem Solving for Enhancing Writing Skills of Secondary Vocational Students

ERIC Educational Resources Information Center

Papantoniou, Eleni; Hadzilacos, Thanasis

2017-01-01

We discuss some aspects of a pilot e-learning technical writing course addressed to 11th grade vocational high school students in Greece. The application of this alternative teaching intervention stemmed from the researcher-instructor's reflections relating to the integration of a problem based e-pedagogy that aims not just to familiarize students…

Effect of Rational Emotive Behavior Therapy on Negative Career Thoughts of Students in Technical Colleges in Nigeria.

PubMed

Ogbuanya, Theresa Chinyere; Eseadi, Chiedu; Orji, Chibueze Tobias; Anyanwu, Joy I; Ede, Moses Onyemaechi; Bakare, Jimoh

2018-04-01

Negative career thoughts are cognitive barriers that interfere with an individual's career decision-making and successful career development. The current study examined the effect of rational-emotive behavior therapy (REBT) on negative career thoughts of students in technical colleges in Nigeria. The study utilized a pretest-posttest control group design. One hundred and seventy-three participants from technical colleges in the Southeast zone of the country completed a measure of career thoughts at pretest, posttreatment, and follow-up: the College Students' Career Thoughts Scale. An REBT career program manual guided the intervention for 12 weeks. Data collected were analyzed using repeated-measures analysis of variance, chi-square, and t-test. Results show that the negative career thoughts of the REBT group participants were significantly reduced relative to a waitlist control group at the end of the intervention. Follow-up tests conducted after three months and six months revealed that the significant decrease in negative career thoughts of the REBT group participants was sustained. The outcomes of the current study suggest that REBT is an invaluable group therapy for assisting college students in overcoming negative thoughts associated with career choice and decision. It would be helpful if further longitudinal evaluation were implemented in Nigeria and in other countries to evaluate whether and how an REBT-based program can improve vocational maturity and vocational identity of technical college students.

Selling Technical Sales to Engineering Learners

ERIC Educational Resources Information Center

Bumblauskas, Daniel P.; Carberry, Adam R.; Sly, David P.

2017-01-01

Sales engineering or technical sales programs bridge engineering and business to educate engineering students in sales specific to their discipline. Students develop business awareness through such programs, providing the sales workforce with technically knowledgeable salespeople. The following study analyzed cohorts of students enrolled in a…

Knowledge and awareness of HIV/AIDS among students of a technical institution.

PubMed

Gupta, Prem Prakash; Verma, Rohit Kumar; Tripathi, Poonam; Gupta, Shruti; Pandey, Awanish Kumar

2015-08-01

Acquired immunodeficiency syndrome (AIDS) is a major health problem worldwide. The number of infected people is increasing daily. Knowledge and awareness toward prevention and control of the disease is necessary among both educated and illiterate people. This study is aimed at assessing the knowledge and awareness about human immunodeficiency virus (HIV)/AIDS among undergraduate students studying in a technical institute in Gorakhpur, Uttar Pradesh, India. A community-based cross-sectional study was conducted among youths aged 15-30 years studying in a technical institution in Gorakhpur. Data were collected using a semistructured questionnaire developed with the help of existing literature, from 250 participants (students). The main source of information was the television; knowledge about the difference between HIV/AIDS was satisfactory. The findings showed that the knowledge about modes of prevention (blood checkup, needle/syringe sterilization) was satisfactory. There were several misconceptions about the modes of transmission of the disease, such as through mosquito bites, eating/drinking, and kissing. The knowledge of the study population was satisfactory, and there is a need for innovation and comprehensive education to impart better knowledge and understanding about HIV/AIDS.

Connecticut State Technical Colleges Fact Book, 1988-89.

ERIC Educational Resources Information Center

Jones, Dennis; McCarroll, Judy

Current and historical data on the Connecticut State Technical College System and its five component parts are provided in this report. Section I presents information on headcount and full-time enrollment trends by program and campus; credit and contact hours; student attrition by term; full- and part-time enrollments; and student characteristics…

Methodology in Seeking Stakeholder Perceptions of Effective Technical Oral Presentations: An Exploratory Pilot Study

ERIC Educational Resources Information Center

Bhattacharyya, Ena; Patil, Arun; Sargunan, Rajeswary Appacutty

2010-01-01

Engineering communication studies indicate the importance of oral presentations as an indispensable component of workplace oral communication activities; however, since there is limited literature regarding stakeholder perceptions of effective presentation skills and attributes in technical oral presentations or final year engineering project…

[Evaluation of the lifestyle of students of physiotherapy and technical & computer science basing on their diet and physical activity].

PubMed

Medrela-Kuder, Ewa

2011-01-01

The aim of the study was the evaluation of a dietary habits profile and physical activity of Physiotherapy and Technical & Computer Science students. The research involved a group of 174 non-full-time students of higher education institutions in Krakow aged between 22 and 27. 81 students of the surveyed studied Physiotherapy at the University of Physical Education, whereas 93 followed a course in Technical & Computer Science at the Pedagogical University. In this project a diagnostic survey method was used. The study revealed that the lifestyle of university youth left much to be desired. Dietary errors were exemplified by irregular meals intake, low consumption of fish, milk and dairy, snacking between meals on high calorie products with a poor nutrient content. With regard to physical activity, Physiotherapy students were characterised by more positive attitudes than those from Technical & Computer Science. Such physical activity forms as swimming, team sports, cycling and strolling were declared by the surveyed the most frequently. Health-oriented education should be introduced in such a way as to improve the knowledge pertaining to a health-promoting lifestyle as a means of prevention of numerous diseases.

Core ITAC for Career-Focused Education. Integrated Technical & Academic Competencies.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document introduces the underlying principles and components of Ohio's Integrated Technical and Academic Competencies (ITAC) system of career-focused education, which combines high-level academics and technical skills with a real-life context for learning that maximizes students' present and future academic and career success. The document…

Mental Health and Academic Performance among Associate Degree Nursing Students at a Technical College

ERIC Educational Resources Information Center

Kliminski, Kerri

2017-01-01

The purpose of this non-experimental cross-sectional quantitative study was to examine the relationship between mental health and academic performance among associate degree nursing (ADN) students at a Midwest technical college by identifying incidence of positive mental health, mental illness symptoms/distress, and mental illness; the…

Nonstandard Topics for Student Presentations in Differential Equations

ERIC Educational Resources Information Center

LeMasurier, Michelle

2006-01-01

An interesting and effective way to showcase the wide variety of fields to which differential equations can be applied is to have students give short oral presentations on a specific application. These talks, which have been presented by 30-40 students per year in our differential equations classes, provide exposure to a diverse array of topics…

The Effect of Socioeconomic Status and Gender on High School Student Perceptions about Career and Technical Education

ERIC Educational Resources Information Center

Chadwell, Briael Marie

2016-01-01

This quantitative study examines the perceptions of career and technical education (CTE) among high school students based on their socioeconomic status and gender, and the interaction between the two. The study used a convenience sample of 207 students from four coastal South Carolina high schools. The data was collected using the Image of…

The Impact of Career and Technical Education Programs on At-Risk Secondary Students

ERIC Educational Resources Information Center

Smith, Sabrina E.

2012-01-01

As the number of youth at risk for educational failure has increased, so has the debate over the appropriate nature of career and technical education (CTE) programs for such youth. The purpose of this study was to gain an understanding about the manner in which CTE programs within vocational schools affected secondary students at risk for…

Technical Objects between Categorisation and Learning: An Exploratory Case Study in French Middle School

ERIC Educational Resources Information Center

Impedovo, M. A.; Andreucci, C.; Delserieys-Pedregosa, A.; Coiffard, C.; Ginestié, J.

2015-01-01

In this article we present exploratory research carried out in order to understand how students (from 12 to 14 years old) relate to technical objects. It uses technical objects that are part of everyday life and mediated reality. A questionnaire was administered to 57 students in French classes. The questionnaire was composed of three parts: 1)…

Psychology of computer use: XXIV. Computer-related stress among technical college students.

PubMed

Ballance, C T; Rogers, S U

1991-10-01

Hudiburg's Computer Technology Hassles Scale, along with a measure of global stress and a scale on attitudes toward computers, were administered to 186 students in a two-year technical college. Hudiburg's work with the hassles scale as a measure of "technostress" was affirmed. Moderate, but statistically significant, correlations among the three scales are reported. No relationship between the hassles scale and achievement as measured by GPA was detected.

College Graduation Rates for Minority Students in a Selective Technical University: Will Participation in a Summer Bridge Program Contribute to Success?

PubMed

Murphy, Terrence E; Gaughan, Monica; Hume, Robert; Moore, S Gordon

2010-03-01

There are many approaches to solving the problem of underrepresentation of some racial and ethnic groups and women in scientific and technical disciplines. Here, the authors evaluate the association of a summer bridge program with the graduation rate of underrepresented minority (URM) students at a selective technical university. They demonstrate that this 5-week program prior to the fall of the 1st year contains elements reported as vital for successful student retention. Using multivariable survival analysis, they show that for URM students entering as fall-semester freshmen, relative to their nonparticipating peers, participation in this accelerated summer bridge program is associated with higher likelihood of graduation. The longitudinal panel data include more than 2,200 URM students.

Assessing the Preparedness and Achievement of Greenville Technical College Students Enrolled in a First Year Physical Science Course: A Preliminary Report.

ERIC Educational Resources Information Center

Farmer, Michael H.

In December 1990, faculty members of the Greenville Technical College (GTC) Physical Sciences Department met to develop methods for improving student achievement and preparedness in the physical sciences. Given the variety of student preparedness levels and lack of data on student backgrounds, the faculty agreed that student achievement and…

Assessing the Degree of Possessing Study Skills by the Students of Tafila Technical University from Their Perspectives

ERIC Educational Resources Information Center

Al-Roud, Atallah A.; Thawabiah, Ahmad

2016-01-01

The study aimed to identify the degree of possessing study skills (SS) by the students of Tafila Technical (TTU) University from their perspectives. The population of the study consisted of 5015 students in TTU for the second semester of the academic year 2015/2016. The sample of the study was chosen randomly from the population of the study with…

Rigor "and" Relevance: Enhancing High School Students' Math Skills through Career and Technical Education

ERIC Educational Resources Information Center

Stone, James R., III; Alfeld, Corinne; Pearson, Donna

2008-01-01

Numerous high school students, including many who are enrolled in career and technical education (CTE) courses, do not have the math skills necessary for today's high-skill workplace or college entrance requirements. This study tests a model for enhancing mathematics instruction in five high school CTE programs (agriculture, auto technology,…

Perceptions of secondary technical schools students in Assiut, upper Egypt, about AIDS: Effect of an educational intervention.

PubMed

Selim, Mohei El-Din A; El-Shereef, Etemad A A

2010-01-01

Acquired Immunodeficiency Syndrome (AIDS) is a great threat to the youth. The aim is to assess the knowledge of secondary technical schools students on AIDS, identify related misconceptions, and measure the effect of a short health education program on their level of knowledge. This quasi-experimental study was done on 575 secondary technical schools students in Assiut City, recruited through a two-stage stratified cluster sampling. A self-administered anonymous questionnaire was used to collect data. A health education program was implemented, and its effect assessed through pre-post testing. The age range of the students was 16 to 20 years, with more girls (57.0%). Only 30.8% had satisfactory knowledge about AIDS in the pretest. Statistically significant improvements in knowledge were revealed after program implementation (P<0.001). Students who were Muslim, of urban residence, and had mobile phones had significantly higher scores (P=0.037, 0.004, 0.038 respectively). The most common misconceptions were the definition of AIDS according to transmission, and phobias related to transmission, which decreased after the intervention. Multivariate analysis showed that the statistically significant independent predictors of the change in knowledge score after the intervention were age, religion and the health education program. Secondary technical schools students in Assiut city have a major deficiency in knowledge and many misconceptions regarding AIDS. The educational intervention had a positive impact on their knowledge, but a less marked effect on misconceptions. Knowledge was affected by age and religious belief. It is recommended that more health educational efforts tailored to needs and with approaches suitable to community cultures and values be introduced.

Scientific and technical papers presented or published by JSC authors in 1985

NASA Technical Reports Server (NTRS)

1986-01-01

The Lyndon B. Johnson Space Center contributions to the scientific and technical literature in aerospace and life sciences made during calendar year 1985 are described. Citations include NASA formal series reports, journal articles, conference and symposium presentations, papers published in proceedings or other collective works, and seminar and workshop results.

An Assessment of Workplace Skills Acquired by Students of Vocational and Technical Education Institutions

ERIC Educational Resources Information Center

Bakar, Ab Rahim; Mohamed, Shamsiah; Hamzah, Ramlah

2013-01-01

This study was performed to identify the employability skills of technical students from the Industrial Training Institutes (ITI) and Indigenous People's Trust Council (MARA) Skills Training Institutes (IKM) in Malaysia. The study sample consisted of 850 final year trainees of IKM and ITI. The sample was chosen by a random sampling procedure from…

Engaging the audience: developing presentation skills in science students.

PubMed

Stuart, Ann E

2013-01-01

This article describes a graduate class in presentation skills ("PClass") as a model for how a class with similar objectives, expectations and culture might be mounted for undergraduates. The required class is given for students in neuroscience and physiology programs at the University of North Carolina at Chapel Hill; I describe the class in the years I led it, from 2003-2012. The class structure centered on peer rehearsal, critiquing of PowerPoint, and chalk talks by the students; video-recording of student talks for later review by the student with the instructor; and presentation of polished talks in a formal setting. A different faculty visitor to the class each week gave the students a variety of perspectives. The students also gained insight into their own evolving skills by discussing the strengths and weaknesses of seminars given by visitors to the campus. A unique feature of the class was collaboration with a professional actor from the University's Department of Dramatic Arts, who helped the students develop techniques for keeping the attention of an audience, for speaking with confidence, and for controlling nervousness. The undergraduate campus would be expected to lend itself to this sort of interdisciplinary faculty cooperation. In addition, students worked on becoming adept at designing and presenting posters, introducing speakers graciously and taking charge of the speaker's question session, and speaking to a lay audience.

College Graduation Rates for Minority Students in a Selective Technical University: Will Participation in a Summer Bridge Program Contribute to Success?

PubMed Central

Murphy, Terrence E.; Gaughan, Monica; Hume, Robert; Moore, S. Gordon

2012-01-01

There are many approaches to solving the problem of underrepresentation of some racial and ethnic groups and women in scientific and technical disciplines. Here, the authors evaluate the association of a summer bridge program with the graduation rate of underrepresented minority (URM) students at a selective technical university. They demonstrate that this 5-week program prior to the fall of the 1st year contains elements reported as vital for successful student retention. Using multivariable survival analysis, they show that for URM students entering as fall-semester freshmen, relative to their nonparticipating peers, participation in this accelerated summer bridge program is associated with higher likelihood of graduation. The longitudinal panel data include more than 2,200 URM students. PMID:23136456

Technical quality of root canal treatment performed by undergraduate students using hand instrumentation: a meta-analysis.

PubMed

Ribeiro, D M; Réus, J C; Felippe, W T; Pacheco-Pereira, C; Dutra, K L; Santos, J N; Porporatti, A L; De Luca Canto, G

2018-03-01

The technical quality of root canal treatment (RCT) may impact on the outcome. The quality of education received during undergraduate school may be linked to the quality of treatment provided in general dental practice. In this context, the aim of this systematic review was to answer the following focused questions: (i) What is the frequency of acceptable technical quality of root fillings, assessed radiographically, performed by undergraduate students? (ii) What are the most common errors assessed radiographically and reported in these treatments? For this purpose, articles that evaluated the quality of root fillings performed by undergraduate students were selected. Data were collected based on predetermined criteria. The key features from the included studies were extracted. GRADE-tool assessed the quality of the evidence. MAStARI evaluated the methodological quality, and a meta-analysis on all studies was conducted. At the end of the screening, 24 articles were identified. Overall frequency of acceptable technical quality of root fillings was 48%. From this total, 52% related to anterior teeth, 49% to premolars and 26% to molars. The main procedural errors reported were ledge formation, furcation perforation, apical transportation and apical perforation. The heterogeneity amongst the studies was high (84-99%). Five studies had a high risk of bias, eight had a moderate risk, and 11 had low risk. The overall quality of evidence identified was very low. The conclusion was that technical quality of root fillings performed by undergraduate students is low, which may reveal that endodontic education has limited achievement at undergraduate level. A plan to improve the quality of root fillings, and by extrapolation the overall quality of root canal treatment, should be discussed by the staff responsible for endodontic education and training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

ERIC Educational Resources Information Center

Whiteside, Aimee L.

2003-01-01

This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

A prospective study of neck, shoulder, and upper back pain among technical school students entering working life.

PubMed

Hanvold, Therese N; Veiersted, Kaj B; Waersted, Morten

2010-05-01

The aim of this prospective study was to relate the prevalence of neck, shoulder, and upper back pain to occupational and individual risk factors among a population of technical school students in their transition from school to working life. In addition, we wanted to assess the changes in pain prevalence during follow-up. A cohort consisting of 173 technical school students was followed up during a 3-year period, from their last year of school through their first years of working life. Data on self-reported neck, shoulder, and upper back pain and factors such as mechanical exposure, perceived stress, and physical activity in leisure time were collected. A high prevalence of pain in the neck, shoulder, and upper back among the technical school students was found. There were however few students reporting severe pain. Reporting pain at baseline gave over three times higher risk of reporting it at follow-up. A high level of physical activity outside working hours gave a lower risk of reporting neck, shoulder, and upper back pain at follow-up. High and moderate levels of mechanical exposure and high stress level were not found to be risk factors for pain after entering working life. Neck, shoulder, and upper back pain are common among adolescents and may persist into working life. These results may give potential for preventive efforts at a young age. There is still much uncertainty about the factors leading to musculoskeletal pain, and more research is needed on this topic. Copyright 2010 Society for Adolescent Medicine. Published by Elsevier Inc. All rights reserved.

Comparative Evaluation of Online and In-Class Student Team Presentations

ERIC Educational Resources Information Center

Braun, Michael

2017-01-01

Student team presentations are commonly utilised in tertiary science courses to help students develop skills in communication, teamwork and literature research, but they are subject to constraints arising from class size, available time, and limited facilities. In an alternative approach, student teams present online using a variety of tools, such…

DEVELOP students give presentation at Headquarters

NASA Image and Video Library

2008-08-07

DEVELOP students from Stennis Space Center traveled to NASA's Headquarters in Washington, D.C., to make a presentation on Gulf Coast disaster management. The team included Madeline Brozen (left) and Lauren Childs. They were joined by team member Matthew Batina (not pictured).

Engaging the Audience: Developing Presentation Skills in Science Students

PubMed Central

Stuart, Ann E.

2013-01-01

This article describes a graduate class in presentation skills (“PClass”) as a model for how a class with similar objectives, expectations and culture might be mounted for undergraduates. The required class is given for students in neuroscience and physiology programs at the University of North Carolina at Chapel Hill; I describe the class in the years I led it, from 2003–2012. The class structure centered on peer rehearsal, critiquing of PowerPoint, and chalk talks by the students; video-recording of student talks for later review by the student with the instructor; and presentation of polished talks in a formal setting. A different faculty visitor to the class each week gave the students a variety of perspectives. The students also gained insight into their own evolving skills by discussing the strengths and weaknesses of seminars given by visitors to the campus. A unique feature of the class was collaboration with a professional actor from the University’s Department of Dramatic Arts, who helped the students develop techniques for keeping the attention of an audience, for speaking with confidence, and for controlling nervousness. The undergraduate campus would be expected to lend itself to this sort of interdisciplinary faculty cooperation. In addition, students worked on becoming adept at designing and presenting posters, introducing speakers graciously and taking charge of the speaker’s question session, and speaking to a lay audience. PMID:24319389

The Attitudes of the Final Students of Technical Education Faculty at Kocaeli University towards Their Faculty's Closing Down

ERIC Educational Resources Information Center

Ira, Nejat

2015-01-01

The purpose of the research is to identify the attitudes of the students at Kocaeli University towards closing down of Technical Education Faculty. These faculties were decided to be closed down in 2009. Since then, both the students and the instructors have been in ambiguity about their future careers. This situation has also affected them…

Measuring Teachers' Efficacy Working with Diverse Student Needs: Testing a Measurement Model. Technical Report # 38

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald; McCoy, Jan

2005-01-01

This technical report describes the development, pilot testing, and revision of a survey instrument designed to measure secondary school teachers' perceptions of their efficacy working with students from diverse backgrounds. A brief review of relevant literature frames the current study in the context of survey development that is technically…

An Interactive Online Approach to Small-Group Student Presentations and Discussions

ERIC Educational Resources Information Center

Thor, Der; Xiao, Nan; Zheng, Meixun; Ma, Ruidan; Yu, Xiao Xi

2017-01-01

Student presentations had been widely implemented across content areas, including health sciences education. However, due to various limitations, small-group student presentations in the classroom may not reach their full potential for student learning. To address challenges with presentations in the classroom, we redesigned the assignment by…

Technical Writing and Communication in a Senior-Level Seminar

NASA Astrophysics Data System (ADS)

Wallner, A. S.; Latosi-Sawin, Elizabeth

1999-10-01

To prepare chemistry majors for entry into graduate school and professional life, a senior-level seminar has been designed at Missouri Western State College that introduces students to scientific journals and aspects of professional communication. Students select topics, conduct research, report progress, write summaries for technical and nontechnical audiences, prepare abstracts, organize outlines, and present a formal research paper. At semester's end, each student delivers a 45-minute seminar to peers and departmental faculty, using easily learned presentation software. Faculty who would adopt this approach need to guide student research, emphasize purpose and audience, illustrate a synthesis of sources, support writing as a process, and help students overcome their fear of public speaking.

Technical Writing Practically Unified through Industry.

ERIC Educational Resources Information Center

Houston, Linda S.

Two technical writing courses at a two-year agricultural college were designed to meet the individualized needs of students in various agricultural studies in the animal industries, horticulture, agricultural business, and agricultural mechanics. Offering a technical writing program based upon the writing tasks of the students' intended…

An Innovative Course in Technical Communication and More

NASA Astrophysics Data System (ADS)

Cranor, Maria B.; Price, Richard H.

2004-05-01

Several studies have shown that otherwise well-prepared physics undergraduates do not develop writing and speaking skills sufficient to the demands of graduate school or the technical workplace. To rectify this, we have developed and taught, for five semesters, a very successful course for junior and senior physics majors. Students improve their writing and speaking skills through technical projects and through a reading list which includes modules on scientific practice and ethics, pseudo science, management, and workplace collaboration. We present here an overview of this course, and discuss the pros and cons of introducing a useful, yet unusual and highly labor-intensive (for teachers and for students) class into the traditional physics curriculum.

Expanding Horizons: A Program for Students Entering Nontraditional Technical Occupations. PY95 Final Detailed Report.

ERIC Educational Resources Information Center

Austin Community Coll., TX.

The Expanding Horizons Project at Austin Community College successfully achieved its goals for Project Year 1994-95. During the year, the project accomplished the following: raised public awareness of the need to overcome gender bias, promoted career opportunities in nontraditional technical occupations to more than 1,200 prospective students,…

Special Education Finance in California. Technical Appendices

ERIC Educational Resources Information Center

Hill, Laura; Warren, Paul; Murphy, Patrick; Ugo, Iwunze; Pathak, Aditi

2016-01-01

This document presents the technical appendices that accompany the full report, "Special Education Finance in California." The appendices include: (1) Problems with AB 602 and Other State Funding Programs for Special Education; (2) Additional Figures for Analysis of Distribution of Students with Disabilities; (3) Using Supplemental and…

Transition Planning for African-American Learning Disabled Students: Are Career and Technical Education Schools the Key to Postsecondary Success?

ERIC Educational Resources Information Center

Walker, Tara D.

2017-01-01

Career and technical education (CTE) programs have been a part of secondary education reform efforts in Georgia aimed at closing the achievement gaps among disadvantaged groups and preparing all students to be college and career ready. The problem is African-American students with learning disabilities (AASWLD) continue to have worse postsecondary…

Predicting Student Performance in Web-Based Distance Education Courses Based on Survey Instruments Measuring Personality Traits and Technical Skills

ERIC Educational Resources Information Center

Hall, Michael

2008-01-01

Two common web-based surveys, "Is Online Learning Right for Me?' and "What Technical Skills Do I Need?", were combined into a single survey instrument and given to 228 on-campus and 83 distance education students. The students were enrolled in four different classes (business, computer information services, criminal justice, and…

Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results

DTIC Science & Technology

1988-09-01

Test and Evaluation Report Test and Evaluation of the Navy Technical Information Presentation System (NTIPS) F-14A Field Test Results by .0 Joseph J...PROGRAM PROJECT TASK WORK UNIT Washington, D.C. 20361 ELEMENT NO. NO. NO. ACCESSION NO. OMN 1820 11. TITLE (Include Security Classification) TEST AND...EVALUATION OF THE NAVY TECHNICAL INFORMATION PRESENTATION SYSTEM (NTIPS) F-14A FIELD TEST RESULTS 12. PERSONAL AUTHOR(S) Fuller, Joseph F. (DTRC) Post

Promoting Creative Thinking Ability Using Contextual Learning Model in Technical Drawing Achievement

NASA Astrophysics Data System (ADS)

Mursid, R.

2018-02-01

The purpose of this study is to determine whether there is influence; the differences in the results between students that learn drawing techniques taught by the Contextual Innovative Model (CIM) and taught by Direct Instructional Model (DIM), the differences in achievement among students of technical drawing that have High Creative Thinking Ability (HCTA) with Low Creative Thinking Ability (LCTA), and the interaction between the learning model with the ability to think creatively to the achievement technical drawing. Quasi-experimental research method. Results of research appoint that: the achievement of students that learned technical drawing by using CIM is higher than the students that learned technical drawing by using DIM, the achievement of students of technical drawings HCTA is higher than the achievement of students who have technical drawing LCTA, and there are interactions between the use of learning models and creative thinking abilities in influencing student achievement technical drawing.

The needs analysis of learning Inventive Problem Solving for technical and vocational students

NASA Astrophysics Data System (ADS)

Sai'en, Shanty; Tze Kiong, Tee; Yunos, Jailani Md; Foong, Lee Ming; Heong, Yee Mei; Mohaffyza Mohamad, Mimi

2017-08-01

Malaysian Ministry of Education highlighted in their National Higher Education Strategic plan that higher education’s need to focus adopting 21st century skills in order to increase a graduate’s employability. Current research indicates that most graduate lack of problem solving skills to help them securing the job. Realising the important of this skill hence an alternative way suggested as an option for high institution’s student to solve their problem. This study was undertaken to measure the level of problem solving skills, identify the needs of learning inventive problem solving skills and the needs of developing an Inventive problem solving module. Using a questionnaire, the study sampled 132 students from Faculty of Technical and Vocational Education. Findings indicated that majority of the students fail to define what is an inventive problem and the root cause of a problem. They also unable to state the objectives and goal thus fail to solve the problem. As a result, the students agreed on the developing Inventive Problem Solving Module to assist them.

The Relationship of Institutional Incentives and Students' Decisions to Enroll in a Technical Postsecondary Program

ERIC Educational Resources Information Center

Long, Bridget A.

2012-01-01

As of 2012, 35,064 Missourians have filed for unemployment benefits and technical institutes are providing training that is becoming vitally important to secure employment in the 21st century. Marketing as a way of attracting prospective students to attend a vocational college is dependent on recruitment incentives. Consequently, the purpose of…

Technical Adequacy of the easyCBM[R] Mathematics Measures: Grades 3-8, 2009-2010 Version. Technical Report #1007

ERIC Educational Resources Information Center

Nese, Joseph F. T.; Lai, Cheng-Fei; Anderson, Daniel; Jamgochian, Elisa M.; Kamata, Akihito; Saez, Leilani; Park, Bitnara J.; Alonzo, Julie; Tindal, Gerald

2010-01-01

In this technical report, data are presented on the practical utility, reliability, and validity of the easyCBM[R] mathematics (2009-2010 version) measures for students in grades 3-8 within four districts in two states. Analyses include: minimum acceptable within-year growth; minimum acceptable year-end benchmark performance; internal and…

Performance of two different digital evaluation systems used for assessing pre-clinical dental students' prosthodontic technical skills.

PubMed

Gratton, D G; Kwon, S R; Blanchette, D R; Aquilino, S A

2017-11-01

Proper integration of newly emerging digital assessment tools is a central issue in dental education in an effort to provide more accurate and objective feedback to students. The study examined how the outcomes of students' tooth preparation were correlated when evaluated using traditional faculty assessment and two types of digital assessment approaches. Specifically, incorporation of the Romexis Compare 2.0 (Compare) and Sirona prepCheck 1.1 (prepCheck) systems was evaluated. Additionally, satisfaction of students based on the type of software was evaluated through a survey. Students in a second-year pre-clinical prosthodontics course were allocated to either Compare (n = 42) or prepCheck (n = 37) systems. All students received conventional instruction and used their assigned digital system as an additional evaluation tool to aid in assessing their work. Examinations assessed crown preparations of the maxillary right central incisor (#8) and the mandibular left first molar (#19). All submissions were graded by faculty, Compare and prepCheck. Technical scores did not differ between student groups for any of the assessment approaches. Compare and prepCheck had modest, statistically significant correlations with faculty scores with a minimum correlation of 0.3944 (P = 0.0011) and strong, statistically significant correlations with each other with a minimum correlation of 0.8203 (P < 0.0001). A post-course student survey found that 55.26% of the students felt unfavourably about learning the digital evaluation protocols. A total of 62.31% felt favourably about the integration of these digital tools into the curriculum. Comparison of Compare and prepCheck showed no evidence of significant difference in students' prosthodontics technical performance and perception. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

EFL Students Use of Technology in the Presentations

ERIC Educational Resources Information Center

Özad, Bahire Efe; Kutoglu, Ülfet

2004-01-01

English for Mass Communication is a course offered by the Faculty of Communication and Media Studies to the students studying at the Departments of Journalism, Radio, Television and Film, and Public Relations and Advertising in their sophomore year. Students taking this course are required to make a presentation at the end of the semester. In…

Improving Student Group Marketing Presentations: A Modified Pecha Kucha Approach

ERIC Educational Resources Information Center

Oliver, Jason; Kowalczyk, Christine

2013-01-01

Student presentations can often seem like a formality rather than a lesson in representing oneself or group in a professional manner. To improve the quality of group presentations, the authors modified the popular presentation style of Pecha Kucha (20 slides, 20 seconds per slide) for marketing courses to help students prepare and deliver…

Technical Report and User's Guide for the Program for International Student Assessment (PISA): 2009 Data Files and Database with U.S. Specific Variables. NCES 2011-025

ERIC Educational Resources Information Center

Hopstock, Paul J.; Pelczar, Marisa P.

2011-01-01

This technical report and user's guide is designed to provide researchers with an overview of the design and implementation of the 2009 Program for International Student Assessment (PISA), as well as with information on how to access the PISA 2009 data. This information is meant to supplement that presented in Organization for Economic Cooperation…

Student laboratory presentations as a learning tool in anatomy education.

PubMed

Chollet, Madeleine B; Teaford, Mark F; Garofalo, Evan M; DeLeon, Valerie B

2009-01-01

Previous studies have shown that anatomy students who complete oral laboratory presentations believe they understand the material better and retain it longer than they otherwise would if they only took examinations on the material; however, we have found no studies that empirically test such outcomes. The purpose of this study was to assess the effectiveness of oral presentations through comparisons with other methods of assessment, most notably, examination performance. Specifically, we tested whether students (n = 256) performed better on examination questions on topics covered by their oral presentations than on other topics. Each student completed two graded, 12-minute laboratory presentations on two different assigned topics during the course and took three examinations, each of which covered a third of the course material. Examination questions were characterized by type (memorization, pathway, analytical, spatial). A two-way repeated measures analysis of variance revealed that students performed better on topics covered by their presentations than on topics not covered by their presentations (P < 0.005), regardless of presentation grade (P > 0.05) and question type (P > 0.05). These results demonstrate empirically that oral presentations are an effective learning tool.

The Image of Career and Technical Education. Practice Application Brief.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Career and technical education (CTE) instructors can use four strategies to present a new image of CTE as a viable strategy for education and work. Strategy 1 is to give students something to brag about. Three ways to help students see their vocational studies as unique and special opportunities for satisfying and rich experiences are to provide…

A Comparison of Teaching and Learning Techniques by Teachers and Students at Northern Maine Technical College.

ERIC Educational Resources Information Center

McKinnon, Norma M.

In 1992, an evaluative study was conducted to describe systematically the characteristics of Northern Maine Technical College's (NMTC's) faculty and students with respect to specified teaching and learning variables. The study sought to determine and outline appropriate instructional improvement strategies for possible implementation at NMTC,…

An Analysis of Mathematics Course Sequences for Low Achieving Students at a Comprehensive Technical High School

ERIC Educational Resources Information Center

Edge, D. Michael

2011-01-01

This non-experimental study attempted to determine how the different prescribed mathematic tracks offered at a comprehensive technical high school influenced the mathematics performance of low-achieving students on standardized assessments of mathematics achievement. The goal was to provide an analysis of any statistically significant differences…

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

The Progression of Podcasting/Vodcasting in a Technical Physics Class

NASA Astrophysics Data System (ADS)

Glanville, Y. J.

2010-11-01

Technology such as Microsoft PowerPoint presentations, clickers, podcasting, and learning management suites is becoming prevalent in classrooms. Instructors are using these media in both large lecture hall settings and small classrooms with just a handful of students. Traditionally, each of these media is instructor driven. For instance, podcasting (audio recordings) provided my technical physics course with supplemental notes to accompany a traditional algebra-based physics lecture. Podcasting is an ideal tool for this mode of instruction, but podcasting/vodcasting is also an ideal technique for student projects and student-driven learning. I present here the various podcasting/vodcasting projects my students and I have undertaken over the last few years.

Mathematics for the Technical Student: The Use of the Computer in the Systems Approach to Instruction.

ERIC Educational Resources Information Center

Capps, Joan P.

An instructional method using flow-chart symbols to make mathematical abstractions more concrete was implemented for a year in a technical mathematics course. Students received instruction in computer applications and programming in the BASIC language in order to increase motivation and firm the mathematical skills and problem-solving approaches…

Effect of Varied Computer Based Presentation Sequences on Facilitating Student Achievement.

ERIC Educational Resources Information Center

Noonen, Ann; Dwyer, Francis M.

1994-01-01

Examines the effectiveness of visual illustrations in computer-based education, the effect of order of visual presentation, and whether screen design affects students' use of graphics and text. Results indicate that order of presentation and choice of review did not influence student achievement; however, when given a choice, students selected the…

The Effect of Capstone Cooperative Education Experiences, and Related Factors, on Career and Technical Education Secondary Student Summative Assessment Scores

ERIC Educational Resources Information Center

Richard, Elizabeth D.; Walter, Richard A.; Yoder, Edgar P.

2013-01-01

Research has discussed the benefits of cooperative education experiences for secondary career and technical education students. Yet, in this era of high stakes testing and program accountability, the amount of time that students are permitted to participate in cooperative education has diminished, fearing that time spent out of the classroom would…

Effects of Reflective Inquiry Instructional Technique on Students' Academic Achievement and Ability Level in Electronic Work Trade in Technical Colleges

ERIC Educational Resources Information Center

Ogbuanya, T. C.; Owodunni, A. S.

2015-01-01

This study was designed to determine the effect of reflective inquiry instructional technique on achievement of students in Technical Colleges. The study adopted a pre-test, post-test, non-equivalent control group, quasi-experimental research design which involved groups of students in their intact class assigned to experimental group and control…

Invention and Writing in Technical Work: Representing the Object.

ERIC Educational Resources Information Center

Winsor, Dorothy A.

1994-01-01

Describes the way invention is relevant to the practice of technical writing. Studies three engineering students engaged in a real-world project. Shows how the students' technical work and invention for the final report were simultaneous activities. Claims that invention for and through writing overlaps with technical invention. (HB)

Using Functional Flow Diagrams to Enhance Technical Systems Understanding.

ERIC Educational Resources Information Center

Satchwell, Richard E.

1997-01-01

A treatment group of 20 aviation students used training manuals that presented functional flow diagrams before schematic diagrams. Comparison of data from 10 controls on a card-sort task showed that functional flow diagrams enhanced understanding of technical systems. (SK)

The International Association for the Exchange of Students for Technical Experience. 32nd Annual Report 1979.

ERIC Educational Resources Information Center

International Association for the Exchange of Students for Technical Experience/United States, Columbia, MD.

After a general outline of the organization of the International Association for the Exchange of Students for Technical Experience and a brief introduction to its functions and activities, this annual report contains the international report. This includes: the report of the General Secretary; a list of international visits and visitors; publicity…

Examining the Professional Development Experiences and Non-Technical Skills Desired for Geoscience Employment

NASA Astrophysics Data System (ADS)

Houlton, H. R.; Ricci, J.; Wilson, C. E.; Keane, C.

2014-12-01

Professional development experiences, such as internships, research presentations and professional network building, are becoming increasingly important to enhance students' employability post-graduation. The practical, non-technical skills that are important for succeeding during these professional development experiences, such as public speaking, project management, ethical practices and writing, transition well and are imperative to the workplace. Thereby, graduates who have honed these skills are more competitive candidates for geoscience employment. Fortunately, the geoscience community recognizes the importance of these professional development opportunities and the skills required to successfully complete them, and are giving students the chance to practice non-technical skills while they are still enrolled in academic programs. The American Geosciences Institute has collected data regarding students' professional development experiences, including the preparation they receive in the corresponding non-technical skills. This talk will discuss the findings of two of AGI's survey efforts - the Geoscience Student Exit Survey and the Geoscience Careers Master's Preparation Survey (NSF: 1202707). Specifically, data highlighting the role played by internships, career opportunities and the complimentary non-technical skills will be discussed. As a practical guide, events informed by this research, such as AGI's professional development opportunities, networking luncheons and internships, will also be included.

Student-Led Presentations "in Situ": The Challenges to Presenting on the Edge of a Volcano

ERIC Educational Resources Information Center

Marvell, Alan

2008-01-01

Student-led seminars are commonplace within higher education but few are allowed the opportunity of being delivered in situ. Presentations in situ widen the experience of students and develop a range of transferable skills, encouraging a greater sense of place and facilitating reflective learning. This case study describes the experiences of a…

Skylab student project.

NASA Technical Reports Server (NTRS)

Kleinknecht, K. S.; Powers, J. E., Jr.

1972-01-01

Review of the Skylab student project conceived to stimulate interest in science and technology by directly involving students in a major research program. Under this project, over 4000 students, ranging in age from 11 to 19 years, submitted proposals from which 301 regional winners and, then, 25 national winners were selected on the basis of their scientific and technical merits. Descriptions are presented of the proposal of these 25 national winners.

A Study of College Professors' Perceptions of International Students in STEM Classrooms at a Technical University

ERIC Educational Resources Information Center

Abendschein, Barbara Feeney

2017-01-01

This study investigated the perceptions of STEM professors at a Southeastern technical college about the international students in their undergraduate classrooms, including impact on the learning environment, academic abilities and proficiency in meeting course goals, contribution to class activities and recommendations for improved preparation.…

A Description of the Psychological Environment of Students at the Agricultural and Technical College at Delhi.

ERIC Educational Resources Information Center

Bertrami, Anthony

The psychological environment of a college is determined by the inner needs of the students and environmental press, i.e. the stresses, conformity-demanding influence, and rewards of the college. To determine the psychological environment at the Agricultural and Technical College at Delhi, 100 males and 85 females were administered the College…

Sexual Minority Students. Technical Assistance Sampler On.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for Mental Health in Schools.

This booklet discusses issues facing sexual minority students. An introduction presents the National Association of School Psychologists' (NASP's) position statement on gay, lesbian, and bisexual youth. Section 1 highlights: "Violence, Homophobia, and Prejudice" (e.g., anti-gay harassment in schools documented, violence prevention, and a…

Pecha Kucha Style Powerpoint Presentation: An Innovative Call Approach to Developing Oral Presentation Skills of Tertiary Students

ERIC Educational Resources Information Center

Murugaiah, Puvaneswary

2016-01-01

In computer-assisted language learning (CALL), technological tools are often used both as an end and as a means to an end (Levy & Stockwell, 2006). Microsoft PowerPoint is an example of the latter as it is commonly used in oral presentations in classrooms. However, many student presentations are often boring as students generally read from…

Students Can Give Psychology Away: Oral Presentations on YouTube

ERIC Educational Resources Information Center

Malouff, John M.; Emmerton, Ashley J.

2014-01-01

This article describes a novel assignment involving students giving a presentation on YouTube about how to apply behavior-modification principles to change a specific type of behavior, chosen by each student. The presentations covered topics such as how to end nail biting and how to reduce anxiety about public speaking. Giving an oral presentation…

Washtenaw Technical Middle College--High School for the High Tech.

ERIC Educational Resources Information Center

Vandenberg, Victoria

1996-01-01

An alternative high school, called a technical middle college, focuses on preparing students for technical careers; it is articulated with Washtenaw Community College. The curriculum integrates applied academics, especially math and science, with work-based learning, giving students technical knowledge and workplace experience. (Author/JOW)

Improving Technical Instruction Using Personality Styles.

ERIC Educational Resources Information Center

Tomal, Daniel R.

2003-01-01

Incorporating personality styles into technical instruction can enhance student learning. Four personality styles based on Jung--intuitor, feeler, thinker, and doer--have implications for individualizing technical instruction. (JOW)

An Overview of Clarkson's Technical Communications Program.

ERIC Educational Resources Information Center

Barkman, Patricia R.

The technical communications program at Clarkson College (New York) offers students 23 courses in subjects ranging from interpersonal behavior to engineering and scientific report writing to computer documentation and the development of technical manuals. With the help of an advisor, each student works out a course of study appropriate to his or…

International Students and "The Presentation of Self" across Cultures

ERIC Educational Resources Information Center

Kamara, Abu

2017-01-01

Findings from this qualitative research study suggest that some international students view social and academic interactions not simply as mediums for absorbing requisite sociocultural and academic norms, and discipline knowledge, but also as stages for expressing their varied identities. As a result, whenever students' ability to present their…

Career-Technical Students in Baccalaureate Programs: Predictors of the Intent to Persist and Satisfaction with Educational Pathways

ERIC Educational Resources Information Center

Uranis, Julie

2015-01-01

This research explores the intersections of descriptive attributes, expectations, and influences (independent variables) and the degree to which they predict the intent to persist and satisfaction (dependent variables) of students enrolled in career-technical programs at four-year institutions. Little research exists for this population, and…

Technical Writing and Beginning ESL Students: A Workshop Approach.

ERIC Educational Resources Information Center

Southard, Sherry G.

Many international students who come to the United States to improve their research techniques and their written and oral presentations have little or no training in the English language. Such students might benefit from a program similar to that held at Oklahoma State University (Stillwater) in September 1981 for 12 Ecuadorian technicians. This…

Distance Education Programs in Texas Community & Technical Colleges: Assessing Student Support Services in a Virtual Environment.

ERIC Educational Resources Information Center

Luedtke, Cherry Beth

This project evaluates the status of distance learning at 54 public, two-year community, and technical colleges in Texas. Data was collected from the Web sites of each of the institutions. The Web site data indicted that 44 of the colleges refer specifically to distance education courses offered. To assess what student support services are…

High School Students' Perception of Career Technical Education and Factors that Influence Enrollment in Programs at a Regional Occupational Center

ERIC Educational Resources Information Center

St. Gean, Laurie M.

2010-01-01

The purpose of this study was to learn about the demographic profile of South Bay-area high school Career Technical Education (CTE) students (those who enroll in CTE courses outside the school day), their perceptions related to CTE, the people and other factors that influence them to enroll in CTE courses, and students' opinions on which…

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

The Impact of Engineering Integrated Science (EIS) Curricula on First-Year Technical High School Students' Attitudes toward Science and Perceptions of Engineering

ERIC Educational Resources Information Center

Nam, Younkyeong; Lee, Sun-Ju; Paik, Seoung-Hey

2016-01-01

This study investigated how engineering integrated science (EIS) curricula affect first-year technical high school students' attitudes toward science and perceptions of engineering. The effect of the EIS participation period on students' attitudes toward science was also investigated via experimental study design. Two engineering integrated…

Seizing the Future: How Ohio's Career-Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Careers

ERIC Educational Resources Information Center

Guarino, Heidi; Yoder, Shaun

2015-01-01

"Seizing the Future: How Ohio's Career and Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Work," demonstrates Ohio's progress in developing strong policies for career and technical education (CTE) programs to promote rigor, including college- and career-ready graduation…

Radiographic technical quality of root canal treatment performed ex vivo by dental students at Valencia University Medical and Dental School, Spain

PubMed Central

Faus-Matoses, Vicente; Alegre-Domingo, Teresa; Faus-Llácer, Vicente J.

2014-01-01

Objectives: To evaluate radiographically the quality of root canal fillings and compare manual and rotary preparation performed on extracted teeth by undergraduate dental students. Study Design: A total of 561 premolars and molars extracted teeth were prepared using nickel-titanium rotary files or manual instrumentation and filled with gutta-percha using a cold lateral condensation technique, by 4th grade undergraduate students. Periapical radiographs were used to assess the technical quality of the root canal filling, evaluating three variables: length, density and taper. These data were recorded, scored and used to study the “technical success rate” and the “overall score”. The length of each root canal filling was classified as acceptable, short and overfilled, based on their relationship with the radiographic apex. Density and taper of filling were evaluated based on the presence of voids and the uniform tapering of the filling, respectively. Statistical analysis was used to evaluate the quality of root canal treatment, considering p < 0.05 as a statistical significant level. Results: The percentage of technical success was 44% and the overall score was 7.8 out of 10. Technical success and overall score were greater with rotary instruments (52% against 28% with a manual one, p < 0.001; 8.3 against 6.7 respectively, p < 0.001). Conclusions: It appears that inexperienced operators perform better root canal treatment (RCT) with the use of rotary instrumentation. Key words:Dental education, endodontics, rotary instrumentation, radiographs, root canal treatment, undergraduate students. PMID:24121911

Presentation to US-Canada Bilateral Technical Working ...

EPA Pesticide Factsheets

DHS and EPA have collaborated in the development of a draft charter for Technical Working Group (TWG) to serve as the basis of negotiations of bilateral agreements with other countries. The TWG would provide a mechanism for sharing both response and R&D expertise and experience in the event of a CBRN incident. The membership of each TWG was tailored to provide appropriate support to the incident commander for the particular situation. Some of the same expertise has been engaged in response to the

Investigating the technical adequacy of curriculum-based measurement in written expression for students who are deaf or hard of hearing.

PubMed

Cheng, Shu-Fen; Rose, Susan

2009-01-01

This study investigated the technical adequacy of curriculum-based measures of written expression (CBM-W) in terms of writing prompts and scoring methods for deaf and hard-of-hearing students. Twenty-two students at the secondary school-level completed 3-min essays within two weeks, which were scored for nine existing and alternative curriculum-based measurement (CBM) scoring methods. The technical features of the nine scoring methods were examined for interrater reliability, alternate-form reliability, and criterion-related validity. The existing CBM scoring method--number of correct minus incorrect word sequences--yielded the highest reliability and validity coefficients. The findings from this study support the use of the CBM-W as a reliable and valid tool for assessing general writing proficiency with secondary students who are deaf or hard of hearing. The CBM alternative scoring methods that may serve as additional indicators of written expression include correct subject-verb agreements, correct clauses, and correct morphemes.

Impact of Entrepreneurship Education on the Entrepreneurial Intentions of Students in Technical and Vocational Education and Training Institutions (TVET) in Malaysia

ERIC Educational Resources Information Center

Ibrahim, Wan Nur Azlina; Bakar, Ab. Rahim; Asimiran, Soaib; Mohamed, Shamsiah; Zakaria, Noor Syamilah

2015-01-01

The purpose of this study was to determine the entrepreneurial intention level of vocational and technical students in Malaysia. A total of 289 final year students who were enrolled at two different TVET institutions (community colleges and National Youth and Skills Institutes) were chosen to participate in the study. The findings indicated that…

INTEREST AND INTELLECTUAL INDICES RELATED TO SUCCESSFUL AND NON-SUCCESSFUL MALE COLLEGE STUDENTS IN TECHNICAL AND ASSOCIATE DEGREE PROGRAMS. FINAL REPORT.

ERIC Educational Resources Information Center

HECKER, DONALD L.; TAYLOR, RONALD G.

THE PURPOSE OF THE PROJECT WAS TO STUDY THE DIFFERENCES AND SIMILARITIES IN INTEREST, ABILITY, AND PREVIOUS ACHIEVEMENT PATTERNS OF 941 MEN STUDENTS WHO ENROLLED IN VARIOUS TECHNICAL AND ASSOCIATE DEGREE 2-YEAR PROGRAMS AND TO DETERMINE WHICH VARIABLES COULD DIFFERENTIATE BETWEEN STUDENTS WHO COMPLETED, CHANGED TO AN ALTERNATE PROGRAM, OR WITHDREW…

Instructional Strategy: Didactic Media Presentation to Optimize Student Learning

ERIC Educational Resources Information Center

Schilling, Jim

2017-01-01

Context: Subject matter is presented to athletic training students in the classroom using various modes of media. The specific type of mode and when to use it should be considered to maximize learning effectiveness. Other factors to consider in this process include a student's knowledge base and the complexity of material. Objective: To introduce…

Linking Ethics and Language in the Technical Communication Classroom.

ERIC Educational Resources Information Center

Sims, Brenda R.

1993-01-01

Discusses research on ethics and technical communication and examines specific methods that writers may use to manipulate language and to present information unethically. Suggests questions designed to teach students how to analyze situations that may involve such manipulation and misrepresentation. Concludes with two case studies illustrating…

Instructional Strategies and Students' Academic Performance in Electrical Installation in Technical Colleges in Akwa Ibom State: Instructional Skills for Structuring Appropriate Learning Experiences for Students

ERIC Educational Resources Information Center

Onweh, Vincent E.; Akpan, Udeme Timothy

2014-01-01

The study investigated the effects of instructional strategies on students' academic performance in Electrical Installation in Technical Colleges in Akwa Ibom State. Instructional skills are the most specific category of teaching behaviours. A non-equivalent control group quasi experimental design was adopted for the study. Four intact classes…

Characterization of Instructor and Student Use of Ubiquitous Presenter, a Presentation System Enabling Spontaneity and Digital Archiving

NASA Astrophysics Data System (ADS)

Price, Edward; Malani, Roshni; Simon, Beth

2007-01-01

Ubiquitous Presenter (UP) is a digital presentation system that allows an instructor with a Tablet PC to spontaneously modify prepared slides, while automatically archiving the inked slides on the web. For two introductory physics classes, we examine the types of slides instructors prepare and the ways in which they add ink to the slides. Modes of usage include: using ink to explicitly link multiple representations; making prepared figures dynamic by animating them with ink; and preparing slides with sparse text or figures, then adding extensive annotations during class. In addition, through an analysis of surveys and of web server logs, we examine student reaction to the system, as well as how often and in what ways students' utilize archived material. In general, students find the system valuable and frequently review the presentations online.

Teacher Perspectives on Performance Based Student Assessment in Career and Technical Education in West Virginia Public Schools

ERIC Educational Resources Information Center

Tuckwiller, Brenda L.

2012-01-01

The purpose of this study was to investigate career and technical education teachers' level of knowledge and use of performance based student assessment practices in West Virginia's secondary and post-secondary career education centers. In addition, this study sought to determine what relationships, if any, exist between levels of knowledge and…

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

Technical Subjects. Mathematics. Science. Curriculum RP-27.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto.

GRADES OR AGES: Grades 9-12. SUBJECT MATTER: Technical subjects and special mathematics and science courses for technical students. Technical subjects include air conditioning, auto mechanics, carpentry, drafting, applied electronics, masonry, painting, plumbing, service station operation, welding, and woodworking. ORGANIZATION AND PHYSICAL…

What Is "Good" Technical Communication? A Comparison of the Standards of Writing and Engineering Instructors.

ERIC Educational Resources Information Center

Smith, Summer

2003-01-01

Presents the results of an empirical study comparing writing and engineering instructors' responses to students' technical writing. Indicates that the gap between engineering and writing teachers' standards for evaluating technical writing is not as wide as is generally assumed. Concludes that the differences that do emerge suggest ways that the…

Assessment of Student Professional Outcomes for Continuous Improvement

ERIC Educational Resources Information Center

Keshavarz, Mohsen; Baghdarnia, Mostafa

2013-01-01

This article describes a method for the assessment of professional student outcomes (performance-type outcomes or soft skills). The method is based upon group activities, research on modern electrical engineering topics by individual students, classroom presentations on chosen research topics, final presentations, and technical report writing.…

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

Graduates Placement Report, 1981: New Hampshire Technical Institute and New Hampshire Vocational-Technical Colleges.

ERIC Educational Resources Information Center

New Hampshire State Dept. of Education, Concord. Div. of Post-Secondary Education.

The New Hampshire Technical Institute (NHTI) and the six New Hampshire Vocational-Technical Colleges (NHVTC) offer collegiate education preparing men and women for direct employment in business, industry, health, and service-related fields. At the completion of the 1980-81 academic year, 1036 students had graduated from 48 different programs…

Improving the Basic Skills of Vocational-Technical Students: An Administrator's Guide. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This guide provides information and guidelines intended to assist vocational administrators in developing and evaluating programs to improve the basic skills of vocational-technical students. Part one provides background information about basic skills and examines their role in vocational education. Discussed next are various program types,…

Preparing for an influx of foreign students in technical writing courses: Understanding their background

NASA Technical Reports Server (NTRS)

Lipson, C. S.

1981-01-01

The cultural and historical influences that students from foreign countries bring with them to technical and report writing classes, in particular those influences that would affect their receipt of instruction in American principles for written prose are examined. The grouping of sentences into idea units and into paragraphs, and the grouping of the paragraphs into whole structures are considered. The different cultures, different habits and norms for handling prose, and the dictates for style and structure and sufficiency and approach are also considered.

Accelerating Opportunity: A Portrait of Students and Their Program Experiences from the 2014 Student Survey

ERIC Educational Resources Information Center

Spaulding, Shayne; Martin-Caughey, Ananda

2015-01-01

This report presents findings from a survey of students enrolled in Accelerating Opportunity (AO) career pathways in spring 2014. AO provides grants to help community colleges create career pathway programs to enroll students with low basic skills into for-credit career and technical education courses to improve educational and employment…

Integration of role-playing into technical skills training: a randomized controlled trial.

PubMed

Nikendei, C; Kraus, B; Schrauth, M; Weyrich, P; Zipfel, S; Herzog, W; Jünger, J

2007-11-01

Recently, efforts have been undertaken to enhance the face validity of technical skills training by introducing role-plays and standardised patients. Since little is known about the effects of role-playing with respect to the realism of a training situation and students' objective performance, we performed a randomized controlled trial. 36 medical students participated in videotaped small group skills-lab sessions on the topics of Doppler sonography and gastric tube insertion. One half of the students participated in role-plays and the other half practised without role-playing. Realism of the training situation was analysed by means of post-intervention self-selected student survey evaluations. Technical performance and patient-physician communication were assessed by independent ratings of the videotaped sessions. The physician's role was regarded to be significantly more realistic when performing role-plays. Assessment of videotaped sessions showed that practising technical skills by performing role-plays resulted in significantly better patient-physician communication whereas students' technical performance did not differ between groups. Introducing role-plays enhances the realism of technical skills training and leads to better patient-physician communication. Students do not seem to be overstrained by practising clinical technical skills using role-plays. We conclude that role-playing is a valuable method in practising technical skills.

Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

47 CFR 5.89 - School and student authorizations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false School and student authorizations. 5.89 Section... THAN BROADCAST) Applications and Licenses § 5.89 School and student authorizations. The Commission may issue an authorization to schools or students for the purpose of presenting experiments or technical...

47 CFR 5.89 - School and student authorizations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false School and student authorizations. 5.89 Section... THAN BROADCAST) Applications and Licenses § 5.89 School and student authorizations. The Commission may issue an authorization to schools or students for the purpose of presenting experiments or technical...

A joint university-government technical editing program

NASA Technical Reports Server (NTRS)

Stohrer, Freda F.; Pinelli, Thomas E.

1978-01-01

The NASA Langley Research Center (LaRC) and Old Dominion University have designed a mutually useful technical editing program. A university team made up of an English instructor and two graduate students - one from English, one from engineering - works with a senior editor from LaRC to prepare technical reports for publication. A round-robin technique gives the university team editorial commentary from both language and technical specialists; the senior editor from LaRC supervises reports through final publication. To date, the system has provided LaRC with a respectable product and university students with valuable on-the-job training.

Teaching Technical Report Writing

ERIC Educational Resources Information Center

De Pasquale, Joseph A.

1977-01-01

A high school electronics teacher describes the integration of technical report writing in the electronics program for trade and industrial students. He notes that the report writing rather than just recording data seemed to improve student laboratory experience but further improvements in the program are needed. A sample lab report is included.…

2012 SARA Students Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Briccetti, Angelo; Lorei, Nathan; Yonkings, David

The Service Academy Research Associates (SARA) program provides an opportunity for Midshipmen and Cadets from US Service Academies to participate in research at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratory for several weeks during the summer as part of their summer training assignments. During the summer of 2012, three Midshipmen were assigned to work with the XCP Division at LANL for approximately 5-6 weeks. As one of the nation's top national security science laboratories, LANL stretches across 36 square miles, has over 2,100 facilities, and employs over 9,000 individuals including a significant numbermore » of students and postdocs. LANL's mission is to 'apply science and technology to: ensure the safety, security, and reliability of the US nuclear deterrent, reduce global threats, and solve other emerging national security challenges.' While LANL officially operates under the US Department of Energy (DoE), fulfilling this mission requires mutual cooperation with the US Department of Defense (DoD) as well. LANL's high concentration of knowledge and experience provides interns a chance to perform research in many disciplines, and its connection with the DoD in both operation and personnel gives SARA students insight to career possibilities both during and after military service. SARA students have plenty of opportunity to enjoy hiking, camping, the Los Alamos YMCA, and many other outdoor activities in New Mexico while staying at the Buffalo Thunder Resort, located 20 miles east of the lab. XCP Division is the Computational Physics division of LANL's Weapons Department. Working with XCP Division requires individuals to be Q cleared by the DoE. This means it is significantly more convenient for SARA students to be assigned to XCP Division than their civilian counterparts as the DoD CNWDI clearance held by SARA students is easily transferred to the lab prior to the students arriving at the

Longitudinal Analysis of Student Performance between Host and Cooperating College Learners in the Dental Hygiene Program at Northcentral Technical College in Wausau, Wisconsin.

ERIC Educational Resources Information Center

Olmsted, Jodi L.

The academic performance of students enrolled in a distance education dental hygiene program at Northcentral Technical College (NTC) in Wausau, Wisconsin, was analyzed in a comparative, quasi-experimental study. The study sample consisted of five cohorts of program graduates (students graduating in 1997-2001). The experiment groups were divided…

Improving Learning, Retention of Knowledge, and Attitude of Students in a Vocational-Technical College through Interactive Computer Technology.

ERIC Educational Resources Information Center

Hitchcock, A. Allen

The problem that this practicum attempted to solve was that students in a vocational-technical college tended to underachieve in courses that were mainly cognitive in nature, as evidenced by low overall grade-point course averages and other measures. The researcher designed computer-based simulation/gaming instruction that aimed to increase…

Student Flow Model SFM-IA Reports. Technical Report 42. Preliminary Draft.

ERIC Educational Resources Information Center

Western Interstate Commission for Higher Education, Boulder, CO. National Center for Higher Education Management Systems.

Examples of the reports generated by the National Center for Higher Education Management Systems (NCHEMS) Student Flow Model (SFM) IA are presented. The SFM-IA is a tool for analyzing the historical movement of students between the various fields of study and student levels in an institution and for estimating the future enrollments in each field…

Development of a teaching tool to encourage high school students to study aerospace technical subjects

NASA Technical Reports Server (NTRS)

Gale, Anita; Edwards, Dick

1998-01-01

This report details the efforts to develop a design competition aimed at high school students which will encourage them to study aerospace technical subjects. It has been shown that such competitions - based on an industry simulation game - are valuable ways to energize high school students to study in this area. Under the grant, a new competition scenario was developed, in keeping with NASA-Dryden's mission to develop aircraft and foster knowledge about aeronautics. Included are preliminary background materials and information which, if the grant is continued, would form the basis of a national competition for high school students, wherein they would design an Aerospaceport in a future year, taking into consideration the requirements of aircraft, spacecraft- ground transportation systems, passengers who use the facility, and employees who operate it. Many of the Competition methods were studied and tested during two existing local competitions in the disadvantaged communities of Lancaster and Victorville, California.

Intensive skills week for military medical students increases technical proficiency, confidence, and skills to minimize negative stress.

PubMed

Mueller, Genevieve; Hunt, Bonnie; Wall, Van; Rush, Robert; Molof, Alan; Schoeff, Jonathan; Wedmore, Ian; Schmid, James; Laporta, Anthony

2012-01-01

The effects of stress induced cortisol on learning and memory is well documented in the literature.1-3 Memory and learning are enhanced at low levels while high levels are detrimental. Repetitive training in stressful situations enables management of the stress response4 as demonstrated by the high intensity training military members undergo to prepare for tactical situations. Appropriate management of one?s stress response is critical in the medical field, as the negative effects of stress can potentially hinder life-saving procedures and treatments. This also applies to physicians-in-training as they learn and practice triage, emergency medicine, and surgical skills prior to graduation. Rocky Vista University?s Military Medicine Honor?s Track (MMHT) held a week long high-intensity emergency medicine and surgical Intensive Skills Week (ISW), facilitated by military and university physicians, to advance students? skills and maximize training using the Human Worn Partial Surgical Task Simulator (Cut Suit). The short-term goal of the ISW was to overcome negative stress responses to increase confidence, technical and non-technical knowledge, and skill in surgery and emergency medicine in an effort to improve performance as third-year medical students. The long-term goal was to enhance performance and proficiency in residency and future medical practice. The metrics for the short-term goals were the focus of this pilot study. Results show an increase in confidence and decrease in perceived stress as well as statistically significant improvements in technical and non-technical skills and surgical instrumentation knowledge throughout the week. There is a correlative benefit to physician and non-physician military personnel, especially Special Operations Forces (SOF) medical personnel, from developing and implementing similar training programs when live tissue or cadaver models are unavailable or unfeasible. 2012.

Lennox - Student Training Equipment.

ERIC Educational Resources Information Center

Lennox Industries, Inc., Marshalltown, IA.

Presents a series of demonstration units designed by Lennox Industries for the purpose of training students to become familiar with Lennox mechanical equipment. Demonstrators are designed to present technical information in a clear simplified manner thus reducing frustration for the beginning trainee. The following demonstrators are available--(1)…

Energy Experiments for STEM Students

NASA Astrophysics Data System (ADS)

Fanchi, John

2011-03-01

Texas Christian University (TCU) is developing an undergraduate program that prepares students to become engineers with an emphasis in energy systems. One of the courses in the program is a technical overview of traditional energy (coal, oil and gas), nuclear energy, and renewable energy that requires as a pre-requisite two semesters of calculus-based physics. Energy experiments are being developed that will facilitate student involvement and provide hands-on learning opportunities. Students participating in the course will improve their understanding of energy systems; be introduced to outstanding scientific and engineering problems; learn about the role of energy in a global and societal context; and evaluate contemporary issues associated with energy. This talk will present the status of experiments being developed for the technical energy survey course.

Presentation to U.S.-Canada Bilateral Technical Working Group

EPA Science Inventory

DHS and EPA have collaborated in the development of a draft charter for Technical Working Group (TWG) to serve as the basis of negotiations of bilateral agreements with other countries. The TWG would provide a mechanism for sharing both response and R&D expertise and experience i...

The composing process in technical communications

NASA Technical Reports Server (NTRS)

Hertz, V. L.

1981-01-01

The theoretical construct under which technical writing exercises operate and results from a survey distributed to a random sample of teachers of technical writing are described. The survey, part of a study to develop materials that did not stress prescriptive formats, drew on diverse elements in report writing to enhance writing as a process. Areas of agreement and disagreement related to problem solving, paper evaluation, and individualizing instruction were surveyed. Areas of concern in contemplating the composition process include: (1) the need to create an environment that helps students want to succeed, (2) the role of peer group activity in helping some students who might not respond through lecture or individual study, and (3) encouraging growth in abilities and helping motivate students' interest in writing projects through relevant assignments or simulations students perceive as relevant.

Assessing Student Scientific Expression Using Media: The Media-Enhanced Science Presentation Rubric (MESPR)

ERIC Educational Resources Information Center

Mott, Michael S.; Chessin, Debby A.; Sumrall, William J.; Rutherford, Angela S.; Moore, Virginia J.

2011-01-01

The current study evaluated an assessment designed to dually promote student understanding of the experimental method and student ability to include digital and visual qualities in their presentations of scientific experiment results. The rubric, the Media-Enhanced Science Presentation Rubric (MESPR) focuses teacher-student dialogue along the…

Report to the Governor and the 1989 Minnesota Legislature. Technical Report.

ERIC Educational Resources Information Center

Minnesota Higher Education Coordinating Board, St. Paul.

This technical report provides a detailed presentation of the status of Minnesota postsecondary education, summarizes policy issues studied by the Minnesota Higher Education Coordinating Board, and reviews programs administered by the Board. Section 1 reviews enrollment trends and projections, student characteristics, and Minnesota's investment in…

Technical Education and Resource Material.

ERIC Educational Resources Information Center

Mills, Marie T.

New approaches and many technical innovations will be required by the junior college to meet the increasing educational needs of technical occupations. A first is information on which the prospective student can base an intelligent choice of occupation. For this he must have a precise job description to determine whether the career fits his…

Spatial Visualization ability improves with and without studying Technical Drawing.

PubMed

Contreras, María José; Escrig, Rebeca; Prieto, Gerardo; Elosúa, M Rosa

2018-03-27

The results of several studies suggest that spatial ability can be improved through direct training with tasks similar to those integrated in the tests used to measure the ability. However, there is a greater interest in analyzing the effectiveness of indirect training such as games or of learning subjects that involve spatial processes to a certain extent. Thus, the objective of the present study was to analyze whether the indirect training in Technical Drawing improved the Spatial Visualization ability of Architecture students. For this purpose, a group of students enrolled in Fundamentals of Architecture were administered two tests, a Spatial Visualization task and an Abstract Reasoning task, at the beginning and the end of a semester, after having received training through the subjects "Technical Drawing I: Geometry and Perception" and "Projects I." The results of this group were compared with those of a control group of students enrolled in a Mathematics degree, who were also pre-post evaluated but had not received the training in Technical Drawing. The study showed a significant pre-post improvement in both, Visualization and reasoning. However, this improvement occurred in both groups, thereby concluding that this improvement was not due to indirect training. Furthermore, no significant differences were found between men and women in any of the groups or conditions. These results clarify those of an earlier study where improvement in Visualization after training in Technical Drawing was found but did not include a comparison with a control condition. The control condition has proved to be important in order to consider the limitations of the effect of Technical Drawing on said improvement.

Evaluating the effectiveness of case method instruction in technical communication

NASA Technical Reports Server (NTRS)

Feinberg, S. G.

1981-01-01

The effectiveness of the case method as an instructional technique in improving technical writing was evaluated. The development of a self-report instrument that attempts to measure changes in attitude toward technical communication and the presentation results change are the purpose of this paper. Standards for developing a case set forth by Goldstein and Couture, were used to design an evaluation instrument to measure the effect instruction on student attitude toward technical communication. This self-report instrument is based on model developed and tested by Daly and Miller who studied writer attitude and apprehension toward writing. It was the most important objective of any evaluation is to provide information for improving the program.

Enrollment and Follow-Up Trends of Students of Full-Time Day Programs of Minnesota Area Vocational-Technical Institutes.

ERIC Educational Resources Information Center

Pucel, David J.; Murphy, Herb

The study examines trends among students and graduates of the Minnesota Area Vocational Technical Institutes (AVTIs). Some of the data were gathered yearly between 1970-71 and 1973-74; some were gathered yearly between 1971-72 and 1973-74. Seventeen selected variables were reviewed. Relatively minor changes occurred over the years on seven of the…

The evaluation of a framework for measuring the non-technical ward round skills of final year nursing students: An observational study.

PubMed

Murray, Kara; McKenzie, Karen; Kelleher, Michael

2016-10-01

The importance of non-technical skills (NTS) to patient outcomes is increasingly being recognised, however, there is limited research into how such skills can be taught and evaluated in student nurses in relation toward rounds. This pilot study describes an evaluation of a NTS framework that could potentially be used to measure ward round skills of student nurses. The study used an observational design. Potential key NTS were identified from existing literature and NTS taxonomies. The proposed framework was then used to evaluate whether the identified NTS were evident in a series of ward round simulations that final year general nursing students undertook as part of their training. Finally, the views of a small group of qualified nurse educators, qualified nurses and general nursing students were sought about whether the identified NTS were important and relevant to practice. The proposed NTS framework included seven categories: Communication, Decision Making, Situational Awareness, Teamwork and Task Management, Student Initiative and Responsiveness to Patient. All were rated as important and relevant to practice. The pilot study suggests that the proposed NTS framework could be used as a means of evaluating student nurse competencies in respect of many non-technical skills required for a successful ward round. Further work is required to establish the validity of the framework in educational settings and to determine the extent to which it is of use in a non-simulated ward round setting. Copyright © 2016 Elsevier Ltd. All rights reserved.

Practical Development of a High School Technical Theatre Course.

ERIC Educational Resources Information Center

Fetzer, Ronald C.

This document presents a week-by-week syllabus for an 18-week high school technical theatre course. This course, which may be expanded to one year or reduced to nine weeks, emphasizes having the student learn by doing, so that the teacher eventually becomes freer to concentrate on play-directing responsibilities. The document also discusses the…

Technical Writing across the Curriculum: Epics.

ERIC Educational Resources Information Center

Olds, Barbara M.

Noting that technically competent graduates of professional schools need additional skills to function effectively in an increasingly complex and global society, this paper describes an innovative program in technical writing developed for undergraduate engineering students at the Colorado School of Mines. The paper first provides background…

Using Model-Based System Engineering to Provide Artifacts for NASA Project Life-Cycle and Technical Reviews Presentation

NASA Technical Reports Server (NTRS)

Parrott, Edith L.; Weiland, Karen J.

2017-01-01

This is the presentation for the AIAA Space conference in September 2017. It highlights key information from Using Model-Based Systems Engineering to Provide Artifacts for NASA Project Life-cycle and Technical Reviews paper.

[Psychophysiologic characteristics of students training in aircrafts construction].

PubMed

D'iakovich, M P; Gus'kova, T M

2005-01-01

The authors presented materials on several parameters of psychophysiologic state in technical college students--potential staffers in aviation enterprises. The authors calculated risks of major pathology syndromes, evaluated level of somatic health, studied memory and intellectual sphere and physical development of the students.

A Systematic Review of Extramural Presentations and Publications from Pharmacy Student Research Programs

PubMed Central

Martin, Jennifer; Worede, Leah; Islam, Sameer

2016-01-01

Objective. To conduct a systematic review of reports of pharmacy student research programs that describes the programs and resulting publications or presentations. Methods. To be eligible for the review, reports had to be in English and indicate that students were required to collect, analyze data, and report or present findings. The outcome variables were extramural posters/presentations and publications. Results. Database searches resulted in identification of 13 reports for 12 programs. Two-thirds were reports of projects required for a course or for graduation, and the remaining third were elective (participation was optional). Extramural posters resulted from 75% of the programs and publications from 67%. Conclusion. Although reporting on the outcomes of student research programs is limited, three-quarters of the programs indicated that extramural presentations, publications, or both resulted from student research. Additional research is needed to identify relevant outcomes of student research programs in pharmacy. PMID:27667837

A Systematic Review of Extramural Presentations and Publications from Pharmacy Student Research Programs.

PubMed

Slack, Marion K; Martin, Jennifer; Worede, Leah; Islam, Sameer

2016-08-25

Objective. To conduct a systematic review of reports of pharmacy student research programs that describes the programs and resulting publications or presentations. Methods. To be eligible for the review, reports had to be in English and indicate that students were required to collect, analyze data, and report or present findings. The outcome variables were extramural posters/presentations and publications. Results. Database searches resulted in identification of 13 reports for 12 programs. Two-thirds were reports of projects required for a course or for graduation, and the remaining third were elective (participation was optional). Extramural posters resulted from 75% of the programs and publications from 67%. Conclusion. Although reporting on the outcomes of student research programs is limited, three-quarters of the programs indicated that extramural presentations, publications, or both resulted from student research. Additional research is needed to identify relevant outcomes of student research programs in pharmacy.

Moving from technical to critical reflection in journalling: an investigation of students' ability to incorporate three levels of reflective writing.

PubMed

Usher, K; Tollefson, J; Francis, D

2001-01-01

This paper outlines a research project aimed at changing the levels of reflection of preregistration nursing students in a tertiary institution. Whilst reflection is widely espoused now in nursing, few studies have been found that identify whether the level of reflective writing can be identified or developed by students. Anecdotal and research evidence (Powell 1989; van Manen 1977) however indicates that most student reflective writing occurs at the technical level. A descriptive exploratory study using both qualitative and quantitative techniques was undertaken to apply van Manen's (1977) levels in a structured way in an attempt to facilitate the student's understanding and use of the levels in their reflective writing. The findings of the study indicate that student self evaluation and identification of the levels in their own writing can lead to change in the levels of critical reflective writing achieved by undergraduate students.

Feed-Forward: Students Gaining More from Assessment via Deeper Engagement in Video-Recorded Presentations

ERIC Educational Resources Information Center

Murphy, Karen; Barry, Shane

2016-01-01

Presentation feedback can be limited in its feed-forward value, as students do not have their actual presentation available for review whilst reflecting upon the feedback. This study reports on students' perceptions of the learning and feed-forward value of an oral presentation assessment. Students self-marked their performance immediately after…

Aiming for excellence - A simulation-based study on adapting and testing an instrument for developing non-technical skills in Norwegian student nurse anaesthetists.

PubMed

Flynn, Fiona M; Sandaker, Kjersti; Ballangrud, Randi

2017-01-01

There is increasing focus on building safety into anaesthesia practice, with excellence in anaesthesia as an aspirational goal. Non-technical skills are an important factor in excellence and improved patient safety, though there have been few systematic attempts at integrating them into anaesthesia nursing education. This study aimed to test the reliability of NANTS-no, a specially adapted behavioural marker system for nurse anaesthetists in Norway, and explore the development of non-technical skills in student nurse anaesthetists. The pre-test post-test design incorporated a 10-week simulation-based programme, where non-technical skills in 14 student nurse anaesthetists were rated on three different occasions during high-fidelity simulation, before and after taking part in a training course. NANTS-no demonstrated high overall inter-rater reliability (ICC = 0.91), high test-retest reliability (ICC = 0.94) and good internal consistency (Cronbach's α of 0.85-0.92). A significant improvement was demonstrated across all categories of non-technical skills, with greatest improvements between the first and third and second and third sessions. There was also a significant improvement in two categories between the first and second sessions. NANTS-no is therefore suitable for assessing non-technical skills during simulation training in anaesthesia nursing education. More research is needed to validate its use in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Student Achievement in Identified Workforce Clusters: Understanding Factors that Influence Student Success

ERIC Educational Resources Information Center

D'Amico, Mark M.; Morgan, Grant B.; Robertson, Thashundray C.

2011-01-01

This study blends elements from two South Carolina Technical College System initiatives--Achieving the Dream and a workforce cluster strategy. Achieving the Dream is a national non-profit organization created to help technical and community college students succeed, particularly low-income students and students of color. This initiative, combined…

Teaching Technical Writing in a Lab Course in Chemical Engineering

ERIC Educational Resources Information Center

Lombardo, Stephen J.

2010-01-01

Techniques are presented for improving the technical writing of chemical engineering students enrolled in an undergraduate laboratory course. The principles of writing covered are adopted from the book, Style: Lessons in Clarity and Grace, by Joseph M. Williams: General examples of writing are taken from this book and then are recast into examples…

Self- and Peer Assessments of Oral Presentations by First-Year University Students

ERIC Educational Resources Information Center

Aryadoust, Vahid

2015-01-01

Forty science students received training for 12 weeks on delivering effective presentations and using a tertiary-level English oral presentation scale comprising three subscales (Verbal Communication, Nonverbal Communication, and Content and Organization) measured by 18 items. For their final project, each student was given 10 to 12 min to present…

A Study of Relationships Between Student Scores on Various Predictor Measures and Vocational Success of Students Who Were Followed Up One and Five Years Following Training in Selected Private Trade, Technical, and Business Schools.

ERIC Educational Resources Information Center

Cox, Steven Grahn

The primary purpose of this study was to investigate the relationships which exist between various predictor measures obtained on students while in training at private post-high school trade, technical, and business schools and a particular global definition of vocational success. The data were collected from 518 students who responded to mailed…

Do Mathematics and Reading Competencies Integrated into Career and Technical Education Courses Improve High School Student State Assessment Scores?

ERIC Educational Resources Information Center

Pierce, Kristin B.; Hernandez, Victor M.

2015-01-01

A quasi experimental study tested a contextual teaching and learning model for integrating reading and mathematics competencies through 13 introductory career and technical education (CTE) courses. The treatment group consisted of students in the 13 introductory courses taught by the CTE teachers who designed the units and the control group…

Basic Concepts and Definitions for Privacy and Confidentiality in Student Education Records. SLDS Technical Brief 1. NCES 2011-601

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The National Center for Education Statistics (NCES) is launching a new series of Technical Briefs on various aspects of the protection of personally identifiable information in students' education records. While driven by recent events, the principles and practices that are outlined in this series can be applied more generally to personally…

Why Do the Growth Rates of Students, Enrollments and Hours Differ So Much between 2006 and 2007? Technical Paper

ERIC Educational Resources Information Center

Karmel, Tom; Mark, Kevin; Mlotkowski, Peter

2009-01-01

This technical paper examines some large and unusual movements for data in the 2007 VET (Vocational Education Training) Provider Collection by comparison with 2006. Changes in the patterns of courses undertaken explain most of the divergence between students, enrolments and hours. Appendices include: (1) Derivation of the decomposition; (2) Tables…

Does a Math-Enhanced Curriculum and Instructional Approach Diminish Students' Attainment of Technical Skills? A Year-Long Experimental Study in Agricultural Power and Technology

ERIC Educational Resources Information Center

Young, R. Brent; Edwards, M. Craig; Leising, James G.

2009-01-01

The purpose of this study was to empirically test the posit that students who participated in a contextualized, mathematics-enhanced high school agricultural power and technology (APT) curriculum and aligned instructional approach would not differ significantly (p less than 0.05) in their technical competence from students who participated in the…

Standardized Test Results: KEEP and Control Students. 1975-1976, Technical Report #69.

ERIC Educational Resources Information Center

Antill, Ellen; Speidel, Gisela E.

This report presents the results of various standardized measures administered to Kamehameha Early Education Program (KEEP) students and control students in the school year 1975-1976. In contrast to previous comparisons, KEEP employed more rigorous procedures for the selection of the control students and for the conditions of test administration.…

The Undergraduate Student Instrument Project (USIP) - building the STEM workforce by providing exciting, multi-disciplinary, student-led suborbital flight projects.

NASA Astrophysics Data System (ADS)

Dingwall, B. J.

2015-12-01

NASA's Science Mission Directorate (SMD) recognizes that suborbital carriers play a vital role in training our country's future science and technology leaders. SMD created the Undergraduate Student Instrument Project (USIP) to offer students the opportunity to design, build, and fly instruments on NASA's unique suborbital research platforms. This paper explores the projects, the impact, and the lessons learned of USIP. USIP required undergraduate teams to design, build, and fly a scientific instrument in 18 months or less. Students were required to form collaborative multidisciplinary teams to design, develop and build their instrument. Teams quickly learned that success required skills often overlooked in an academic environment. Teams quickly learned to share technical information in a clear and concise manner that could be understood by other disciplines. The aggressive schedule required team members to hold each other accountable for progress while maintaining team unity. Unanticipated problems and technical issues led students to a deeper understanding of the need for schedule and cost reserves. Students exited the program with a far deeper understanding of project management and team dynamics. Through the process of designing and building an instrument that will enable new research transforms students from textbook learners to developers of new knowledge. The initial USIP project funded 10 undergraduate teams that flew a broad range of scientific instruments on scientific balloons, sounding rockets, commercial rockets and aircraft. Students were required to prepare for and conduct the major reviews that are an integral part of systems development. Each project conducted a Preliminary Design Review, Critical Design Review and Mission Readiness review for NASA officials and flight platform providers. By preparing and presenting their designs to technical experts, the students developed a deeper understanding of the technical and programmatic project pieces that

Teaching Technical Writing: Focusing on Process.

ERIC Educational Resources Information Center

Santelmann, Patricia Kelly

In preparing students for business writing, a technical writing class should foster (1) a sensitivity to audience and an understanding of the business or technical organizational audience, (2) analytical problem solving that precedes any but the simplest writing task, (3) understanding of the patterns of organization that make information clear to…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 27: The technical communication practices of engineering and science students: Results of the phase 3 academic surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Hecht, Laura M.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of engineers and science (Physics) students. The reported data were obtained from a survey of students enrolled in the College of Engineering at the University of Illinois at Urbana-Champaign, Bowling Green State University, and Texas A&M University. The survey was undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign technical reports; and foreign language (reading and speaking) skills.

Differentiated Technical Assistance for Sustainable Transformation. Technical Assistance Brief #2

ERIC Educational Resources Information Center

McCart, Amy; McSheehan, Michael; Sailor, Wayne

2015-01-01

Schoolwide Integrated Framework for Transformation (SWIFT) Center's technical assistance process supports states, districts, and schools as they become excellent and equitable teaching and learning environments for "all" students. Each school with support from its district begins this process from its own starting point and travels its…

ETC 408/508: Technical Editing

ERIC Educational Resources Information Center

Charlton, Michael

2013-01-01

ETC 408/508: Technical Editing is a cross-listed undergraduate and graduate course at Missouri Western State University, an open admissions public university with approximately 6,000 students. 508 is an elective course for students in the Master of Applied Arts in Written Communication degree and highly recommended for those in the Technical…

Evaluating a technical university's placement test using the Rasch measurement model

NASA Astrophysics Data System (ADS)

Salleh, Tuan Salwani; Bakri, Norhayati; Zin, Zalhan Mohd

2016-10-01

This study discusses the process of validating a mathematics placement test at a technical university. The main objective is to produce a valid and reliable test to measure students' prerequisite knowledge to learn engineering technology mathematics. It is crucial to have a valid and reliable test as the results will be used in a critical decision making to assign students into different groups of Technical Mathematics 1. The placement test which consists of 50 mathematics questions were tested on 82 new diplomas in engineering technology students at a technical university. This study employed rasch measurement model to analyze the data through the Winsteps software. The results revealed that there are ten test questions lower than less able students' ability. Nevertheless, all the ten questions satisfied infit and outfit standard values. Thus, all the questions can be reused in the future placement test at the technical university.

Bonding with the Nuclear Industry: A Technical Communication Professor and His Students Partner With Y-12 National Security Complex

ERIC Educational Resources Information Center

Hirst, Russel

2016-01-01

This article describes how a special kind of academe-industry collaboration--based on a joint appointment agreement between a university and an industry site--was set up, promoted, and experienced by a professor of technical communication and his student interns. To illustrate the nature and value of this kind of collaboration, the article…

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

ERIC Educational Resources Information Center

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

A Second Follow-Up Year for "Measuring How Benchmark Assessments Affect Student Achievement." REL Technical Brief. REL 2008-No. 002

ERIC Educational Resources Information Center

Henderson, Susan; Petrosino, Anthony; Guckenburg, Sarah; Hamilton, Stephen

2008-01-01

This technical brief examines whether, after two years of implementation, schools in Massachusetts using quarterly benchmark exams aligned with state standards in middle school mathematics showed greater gains in student achievement than those not doing so. A quasi-experimental design, using covariate matching and comparative interrupted…

Remote Electronic Examinations: Student Experiences.

ERIC Educational Resources Information Center

Thomas, Peter; Price, Blaine; Paine, Carina; Richards, Mike

2002-01-01

Presents findings from a small-scale experiment investigating the presentation of a synchronous, Web-based remote electronic exam in a distance education course. Discusses student experiences based on a questionnaire; time pressures; technical issues; differences between the structure of an electronic exam and a paper-based exam; and future work,…

At-Risk Learner Preference in Engineering/Technical Graphics: An Exploratory Study

ERIC Educational Resources Information Center

Ernst, Jeremy V.

2011-01-01

This exploratory study investigated learner preferences of secondary Career and Technical Education (CTE) Engineering/Technical Graphics students using the VARK Questionnaire. The VARK Questionnaire is an instrument that assists in determining students' dominant preferred learning styles, whether visual, aural, reading, or kinesthetic. This study…

The Impact of Practitioner Presentations on Student Attitudes about Accounting.

ERIC Educational Resources Information Center

Fedoryshyn, Michael W.; Tyson, Thomas N.

2003-01-01

In two of four sections of an accounting course, students attended presentations by accountants. Precourse (n=138) and postcourse (n=99) questionnaires indicated that those exposed to presentations had far more positive attitude changes regarding accountants, the profession, and accounting careers. (SK)

Technical Standards and Deaf and Hard of Hearing Medical School Applicants and Students: Interrogating Sensory Capacity and Practice Capacity.

PubMed

Argenyi, Michael

2016-10-01

Applicants to medical schools who are deaf and hard of hearing (DHoH) or who have other disabilities face significant barriers to medical school admission. One commonly cited barrier to admission is medical schools' technical standards (TS) for admission, advancement, and graduation. Ethical values of diversity and equity support altering the technical standards to be more inclusive of people with disabilities. Incorporating these values into admissions, advancement, and graduation considerations for DHoH and other students with disabilities can contribute to the physician workforce being more representative of the diverse patients it serves and better able to care for them. © 2016 American Medical Association. All Rights Reserved.

The Importance and Interest of Introductory Psychology Textbook Topics: Student Opinions at Technical College, 2-, and 4-Year Institutions

ERIC Educational Resources Information Center

McCann, Lee I.; Immel, Kathy R.; Kadah-Ammeter, Tammy L.; Adelson, Sarah K.

2016-01-01

Introductory psychology students at a technical college, 2-year community college, and a regional university rated how important textbook chapters or topics were to them now and in the future and how interesting they were. Importance and interest ratings were highly correlated, and the whole course was rated of greater importance and interest than…

A model summer program for handicapped college students

NASA Technical Reports Server (NTRS)

Nissen, Anne B.

1989-01-01

During the summer of 1988, the Goddard Space Flight Center was the site of a new NASA project called A Model Summer Program for Handicapped College Students that was directed by Gallaudet University. The project's aim was to identify eight severely physically disabled college students (four from Gallaudet University and four from local historically black colleges and universities (HBCU's)) majoring in technical fields and to assign them technical projects related to aerospace which they would complete under the guidance of mentors who were full time employees of Goddard. A description of the program is presented.

Technical Quality of Root Canal Treatment Performed by Undergraduate Clinical Students of Isfahan Dental School.

PubMed

Saatchi, Masoud; Mohammadi, Golshan; Vali Sichani, Armita; Moshkforoush, Saba

2018-01-01

The aim of the present study was to evaluate the radiographic quality of RCTs performed by undergraduate clinical students of Dental School of Isfahan University of Medical Sciences. In this cross sectional study, records and periapical radiographs of 1200 root filled teeth were randomly selected from the records of patients who had received RCTs in Dental School of Isfahan University of Medical Sciences from 2013 to 2015. After excluding 416 records, the final sample consisted of 784 root-treated teeth (1674 root canals). Two variables including the length and the density of the root fillings were examined. Moreover, the presence of ledge, foramen perforation, root perforation and fractured instruments were also evaluated as procedural errors. Descriptive statistics were used for expressing the frequencies of criteria and chi square test was used for comparing tooth types, tooth locations and academic level of students ( P <0.05). The frequency of root canals with acceptable filling was 54.1%. Overfilling was found in 11% of root canals, underfilling in 8.3% and inadequate density in 34.6%. No significant difference was found between the frequency of acceptable root fillings in the maxilla and mandible ( P =0.072). More acceptable fillings were found in the root canals of premolars (61.3%) than molars (51.3%) ( P =0.001). The frequency of procedural errors was 18.6%. Ledge was found in 12.5% of root canals, foramen perforation in 2%, root perforation in 2.4% and fractured instrument in 2%. Procedural errors were more frequent in the root canals of molars (22.5%) than the anterior teeth (12.3%) ( P =0.003) and the premolars (9.5%) ( P <0.001). Technical quality of RCTs performed by clinical students was not satisfactory and incidence of procedural errors was considerable.

NAEP 1999 Long-Term Trend Technical Analysis Report: Three Decades of Student Performance. NCES 2005-484

ERIC Educational Resources Information Center

Allen, Nancy L.; McClellan, Catherine A.; Stoeckel, Joan J.

2005-01-01

This report provides an update to the technical analysis procedures documenting the 1996 National Assessment of Educational Progress (NAEP) as presented in "The NAEP 1996 Technical Report" (Allen, Carlson, and Zelenak, 1999). It describes how the 1999 long-term trend data were incorporated into the trend analyses. Since no national main…

A Study of Learning-Centered Leadership Skills of Principals in Career and Technical Education Schools

ERIC Educational Resources Information Center

Rodman, Mary E.

2012-01-01

Despite years of educational reform, secondary students have demonstrated only modest increases in achievement. Career and technical education students have not demonstrated the same level of performance as non-career and technical education students. Except for teachers, principals have the greatest influence over student achievement. What should…

Modernizing Career and Technical Education Programs

ERIC Educational Resources Information Center

Drage, Karen

2009-01-01

High-quality career and technical education (CTE) programs can launch America's future competitiveness through increased student engagement, the innovative integration of traditional academic courses, and by meeting the needs of both employers and the economy as a whole. American students failing to keep pace with their international counterparts…

National Leaders in Innovation. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

Washington's community and technical colleges set a national example for innovative policies, practices and research for student success. Washington's community and technical college system ranks 12th in the nation for graduation rates, and 7th for certificates and degrees produced. Olympic College and Renton Technical College in March 2015 were…

Perception of Present and Vision of Future of Gifted Students

ERIC Educational Resources Information Center

Krneta, Docent Ljiljana

2016-01-01

Giftedness and talent are the focus of many professional and scientific debates. Starting from the phenomenological interpretation that emphasizes the perception of self and reflects the subjective experience of the present and the future, the author presents the attitude of the gifted and other students towards the psychological nature of…

Analysis of Student Perceptions of the Psychosocial Learning Environment in Online and Face-to-Face Career and Technical Education Courses

ERIC Educational Resources Information Center

Carver, Diane L.; Kosloski, Michael F., Jr.

2015-01-01

This study analyzed student perceptions of the psychosocial learning environment in online and face-to-face career and technical education courses, and used survey data from a school district in Washington state. A Mann-Whitney "U" test was used to measure variability and compare the mean scores for a series of psychosocial learning…

A Combined Corpus and Systemic-Functional Analysis of the Problem-Solution Pattern in a Student and Professional Corpus of Technical Writing.

ERIC Educational Resources Information Center

Flowerdew, Lynne

2003-01-01

Reports on research describing similarities and differences between expert and novice writing in the problem-solution pattern, a frequent rhetorical pattern of technical academic writing. A corpus of undergraduate student writing and one containing professional writing consisted of 80 and 60 recommendation reports, respectively, with each corpus…

The Two-Semester Thesis Model: Emphasizing Research in Undergraduate Technical Communication Curricula

ERIC Educational Resources Information Center

Ford, Julie Dyke; Bracken, Jennifer L.; Wilson, Gregory D.

2009-01-01

This article addresses previous arguments that call for increased emphasis on research in technical communication programs. Focusing on the value of scholarly-based research at the undergraduate level, we present New Mexico Tech's thesis model as an example of helping students develop familiarity with research skills and methods. This two-semester…

Jobsite Supervisor Instructor's Manual for Electrical Apprentice Technical Training. Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

One hundred and sixteen lesson plans for a first, second, third and fourth year electrical apprentice technical training program are presented in this manual. The lesson plans are generally organized into four steps: introducing the lesson, presenting the lessons (e.g., demonstration), student application (use of worksheets), and checking and…

Community College Technical Mathematics Project. Final Report.

ERIC Educational Resources Information Center

Self, Samuel L.

The purpose of the research project was to develop an applied or technical mathematics curriculum which would meet the needs of vocational-technical students at the community college level. The research project was divided into three distinct phases: Identifying the mathematical concepts requisite for job-entry competencies in each of the…

Treatment-seeking college students with disabilities: Presenting concerns, protective factors, and academic distress.

PubMed

Fleming, Allison R; Edwin, Mary; Hayes, Jeffrey A; Locke, Benjamin D; Lockard, Allison J

2018-02-01

Students with disabilities are a growing population on college campuses and have unique challenges that put them at risk for early departure, creating complexity in efforts to address their personal and academic needs. The purpose was to explore academic and other sources of distress among college students with disabilities to identify possible areas where enhanced supports might benefit this population. Research Method and Design: Researchers analyzed cross-sectional data from the Center for Collegiate Mental Health to compare subsamples of students with (n = 1,774) and without disabilities (n = 1,774) on presenting concerns, and to determine significant predictors of academic distress among students with disabilities. Results indicated that students with disabilities have many similar treatment concerns with their peers, but showed greater concerns in depression and self-harm; academic performance; anxiety and obsessions/compulsions; and fewer concerns in relationship problems. Significant predictors of academic distress for students with disabilities included attention deficit-hyperactivity disorder (ADHD), depression and self-harm, trauma or victimization, stress and academic performance, and social support from family and peers. These results suggest the importance of several factors in understanding the presenting concerns of treatment-seeking students with disabilities and mitigating academic distress for this population. Additional areas for research are presented. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

78 FR 35877 - Applications for New Awards; Native Hawaiian Career and Technical Education Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... attain career and technical skills; (7) The use of student assessment and evaluation data to improve... the industry the student is preparing to enter; (iv) Activities, during the formative stages of the... students' technical assessments, by type and scores, if available; (vii) The rates of attainment of a...

Technical quality of root canal treatment of posterior teeth after rotary or hand preparation by fifth year undergraduate students, The University of Jordan.

PubMed

Abu-Tahun, Ibrahim; Al-Rabab'ah, Mohammad A; Hammad, Mohammad; Khraisat, Ameen

2014-12-01

The aim of this study was to investigate the technical quality of root canal treatment provided by the undergraduate students as their first experience in molar endodontics using nickel-titanium (NiTi) files in a crown-down approach compared with stainless steel standard technique. This study was carried out by the fifth year undergraduate students attending peer review sessions as a part of their training programme, using two different questionnaires to assess the overall technical quality and potential problems regarding endodontic complications after root canal preparation with these two techniques. The overall results indicated a statistically significant difference in the performance of the two instrument techniques in difficult cases showing better performance of the NiTi system and mean rotary preparation time (P < 0.001). Under the conditions of this study, novice dental students, using NiTi ProTaper rotary files, were able to prepare root canals faster with more preparation accuracy compared with canals of same teeth prepared with hand instruments. © 2014 Australian Society of Endodontology.

Identifying the Value of the ACT Score as a Predictor of Student Success in Respiratory Care, Radiography, and Nursing at Southeast Kentucky Community and Technical College

ERIC Educational Resources Information Center

Parrott-Robbins, Rebecca Jon

2010-01-01

The purpose of this study was to investigate--by utilizing data obtained from the Kentucky Community and Technical College System (KCTCS) PeopleSoft database-- whether the American College Testing (ACT) assessment was a predictor of student success for students who had graduated from respiratory, radiography, and nursing programs at Southeast…

South Carolina TEC Student Code.

ERIC Educational Resources Information Center

Edwards, C. A., Ed.; Kiser, J. A., Ed.

This student code has statewide application to South Carolina Technical Colleges and Technical Education Centers (TEC). Provisions are divided into eight articles: (1) General Provisions, including the purpose of a student code, the precept of internal solution of problems, and definitions; (2) Student Rights, including Bill of Rights protections;…

Enhancing non-technical skills by a multidisciplinary engineering summer school

NASA Astrophysics Data System (ADS)

Larsen, Peter Gorm; Kristiansen, Erik Lasse; Bennedsen, Jens; Bjerge, Kim

2017-11-01

In general engineering studies focus on the technical skills in their own discipline. However, in their subsequent industrial careers, a significant portion of their time needs to be devoted to non-technical skills. In addition, in an increasingly globalised world collaboration in teams across cultures and disciplines is paramount to the creation of new and innovative products. In order to enhance the non-technical skills for groups of engineering students a series of innovation courses has been arranged and delivered in close collaboration with an industrial company (Bang & Olufsen). These courses have been organised as summer schools called 'Conceptual Design and Development of Innovative Products' (CD-DIP) and delivered outside the usual educational environment. In order to explore the impact of this single course, we have conducted a study among the students participating from 2007 to 2013. This has been carried out both qualitatively using interviews with selected students as well as quantitatively using a survey. The results are outstanding in demonstrating that the non-technical skills obtained in this single course have been of high value for a large portion of the students' subsequent professional life.

Career Technical Education Enhancement Fund Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2015

2015-01-01

The California Community Colleges serve more than 2.1 million students and is the largest system of higher education in the nation. The state's 112 colleges provide workforce training, teach basic math and English, and prepare students for transfer to four-year universities and colleges. Senate Bill 852 established the Career Technical Education…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 28: The technical communication practices of aerospace engineering and science students: Results of the phase 4 cross-national surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate aerospace engineering and science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an aerospace engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication skills, practices, habits, and training of aerospace engineering and science students. The reported data were obtained from a survey of students enrolled in aerospace engineering and science programs at universities in India, Japan, Russia, and the United Kingdom. The surveys were undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 46: Technical communications in aerospace: A comparison across four countries

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Hecht, Laura Frye; Barclay, Rebecca O.

1995-01-01

In this paper we describe the preliminary analysis of four groups of aerospace engineering and science students -- student members of the American Institute of Aeronautics and Astronautics (AIAA) and students from universities in Japan, Russia, and Great Britain. We compare: (1) the demographic characteristics of the students; (2) factors that affected their career decision; (3) their career goals and aspirations; (4) their training in technical communication; and (5) their training in techniques for finding and using aerospace scientific and technical information (STI). Many employers in the US aerospace industry think there is a need for increased training of engineering students in technical communication. Engineers in the US and other countries believe that technical communication skills are critical for engineers' professional success. All students in our study agree about the importance of technical communication training for professional success, yet relatively few are happy with the instruction they receive. Overall, we conclude that additional instruction in technical communication and accessing STI would make it easier for students to achieve their career goals.

An Experimental Remote Question-Answer Scan Television and Student Evaluation System.

ERIC Educational Resources Information Center

Rigas, Anthony L.

Presented is a description of the development and use of a technical system designed to provide students (in this case, engineering students) situated at remote sites a means for better interaction with their instructors. For example, students at such sites cannot get their immediate questions answered because of the physical location of their…

Exploring Electrochromics: A Series of Eye-Catching Experiments to Introduce Students to Multidisciplinary Research

ERIC Educational Resources Information Center

Small, Leo J.; Wolf, Steven; Spoerke, Erik D.

2014-01-01

Introducing students to a multidisciplinary research laboratory presents challenges in terms of learning specific technical skills and concepts but also with respect to integrating different technical elements to form a coherent picture of the research. Here we present a multidisciplinary series of experiments we have developed in the Electronic,…

An Intensive Presentations Course in English for Aeronautical Engineering Students Using Cyclic Video Recordings

ERIC Educational Resources Information Center

Tatzl, Dietmar

2017-01-01

This article presents the design and evaluation of an intensive presentations course for aeronautical engineering students based on cyclic video recordings. The target group of this course in English for specific purposes (ESP) were undergraduate final-year students who needed to improve their presentation and foreign language skills to prepare…

Government Projects and Teaching the Technical Proposal.

ERIC Educational Resources Information Center

Butler, Douglas R.

1987-01-01

Describes a technical proposal writing assignment modeled after the conditions in industry. Provides a paradigm of government project proposals and then outlines the stages of the assignment that allow student to rework and revise, thereby discouraging students from writing formulaic and superficial proposals. (SRT)

Media Presentations on the Reading Attention and Comprehension of Taiwanese Elementary School Students

ERIC Educational Resources Information Center

Ku, David Tawei; Cheng, Yu-Mei

2016-01-01

We adopted an experimental design to investigate the effects of various media presentation modes on the reading attention and comprehension of Taiwanese elementary school students. The participants comprised 138 students from 4 classes of third grade elementary school students from New Taipei City, Taiwan. The participants attended 5 short stories…

Teaching Technical Students To Be Critical.

ERIC Educational Resources Information Center

Shaw, K. E.

Changing conditions in the global market have necessitated that students be taught to adopt new knowledge by understanding it in depth and having it spontaneously available for use in the real world. All students, especially those in science and technology, must learn to construct new meanings and understandings independently by restructuring…

How to develop and write a case for technical writing

NASA Technical Reports Server (NTRS)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

Developing non-technical ward-round skills.

PubMed

Harvey, Rachel; Mellanby, Edward; Dearden, Effie; Medjoub, Karima; Edgar, Simon

2015-10-01

Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform. There is evidence that newly qualified doctors are not adequately prepared by their undergraduate experiences for this task. The aim of this study was to analyse the challenges pertaining to non-technical skills that students would face during ward rounds, and to create a model that facilitates the transition from medical student to doctor. A total of 217 final-year medical students completed a simulated ward round. Free-text responses were analysed using template analysis applying an a priori template developed from the literature by the research team. This drew on the generic categories of non-technical skills suggested by Flin et al. Ninety-seven per cent of students agreed or strongly agreed that the simulated ward round improved their insight into the challenges of ward rounds and their perceived ability to work efficiently as an active member of the ward round. The responding students (206) submitted written feedback describing the learning that they planned to use: 800 learning points were recorded, and all could be categorised into one of seven non-technical skills. Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform We believe that improved task efficiency and insight into the challenges of the ward round gained by medical students will lead to an enhancement in performance during clinical rounds, and will have a positive impact on patient safety. We would suggest that undergraduate medical schools consider this model in the preparation for the clinical practice element of the curriculum. © 2015 John Wiley & Sons Ltd.

Three Ways to Improve Student Presentations

ERIC Educational Resources Information Center

Metcalf, Amy; Layton, Margaret V.; Goslin, Trina L.

2016-01-01

Twenty-first-century students are adept at using technology, which means that incorporating appropriate technology into the classroom can excite and engage students and improve oral production and fluency, which Rossiter, Derwing, Manimtim, and Thomson (2010) have identified as missing from many language classrooms. Therefore, academic…

The Impact of an Interdisciplinary Space Program on Computer Science Student Learning

ERIC Educational Resources Information Center

Straub, Jeremy; Marsh, Ronald; Whalen, David

2015-01-01

Project-based learning and interdisciplinary projects present an opportunity for students to learn both technical skills and other skills which are relevant to their workplace success. This paper presents an assessment of the educational impact of the OpenOrbiter program, a student-run, interdisciplinary CubeSat (a type of small satellite with…

Health Related Occupations. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in health related occupations. A three-phase…

Entrepreneurship Education through Industrial Internship for Technical and Vocational Students

NASA Astrophysics Data System (ADS)

Sumual, H.; Soputan, G. J.

2018-02-01

The spirit of entrepreneurship must be formed in an integrated process in learning so that commitment, responsibility and work ethic on the candidate of vocational high school graduates are effectively promoted. Learning teaching factory teaches students how to find problems, build prototypes, learn to make business plan, and learn to present their own solutions. The research objective is to assess the effectiveness of Teaching Factory implementation in improving the competence and skills of students in the field of entrepreneurship. The method used in this research is case study. Key informants were determined purposively in charge of teaching factory, students, and teachers who teach in productive subject. The results achieved in this study are: 1) culinary and hospitality units are the most active groups in producing products for teaching factory, 2) the role of entrepreneurial groups in each unit of production in order to increase productivity 3) students earn revenues of teaching factory and production unit get percentage of product or service sales, 3) the role of each production unit determines the level of teaching factory effectiveness.

The Virtual Poster Showcase: Opportunities for students to present their research from anywhere

NASA Astrophysics Data System (ADS)

Asher, P. M.; Furukawa, H.; Williams, B. M.; Holm Adamec, B.

2015-12-01

Although many students conduct research with faculty in organized summer programs or as part of their course work or their degree work, they often face barriers to traveling to present that research, especially at national or international conferences. This is especially true for students who are members of underrepresented minority populations and students studying outside of the United States. A new and exciting opportunity for undergraduate as well as graduate students to showcase their work is now available. AGU piloted three opportunities for an undergraduate and graduate virtual poster showcase in the fall of 2015. Student participants were recruited from a diverse array of groups including minority-serving organizations, two-year colleges, and internship programs at federal agencies and national laboratories. Students uploaded an abstract, poster, and short video explain their research, and then participated in Q&A sessions with peers as well as expert judges. This presentation will share characteristics of participating groups, lessons learned from this new program, and preliminary evaluation findings as well as plans for the future.

Social Utility versus Social Desirability of Students' Attributional Self-Presentation Strategies

ERIC Educational Resources Information Center

Matteucci, Maria Cristina

2014-01-01

Research on impression management has shown that students can manage their social images by providing attributional self-presentation strategies (ASPSs). Based on the distinction between social desirability judgments and social utility judgments, two studies were conducted to examine the students' understanding of the impact of ASPSs both on…

A Researcher-Practitioner Partnership on Remedial Math Contextualization in Career and Technical Education Programs

ERIC Educational Resources Information Center

Wang, Xueli; Wang, Yan; Prevost, Amy

2017-01-01

This chapter documents a partnership between university-based researchers and community college instructors and practitioners in their collective pursuit to improve student success in manufacturing programs at a large urban 2-year technical college, presenting an example of a contextualized instructional approach to teaching developmental math,…

The Potential of Experiential Learning Models and Practices in Career and Technical Education and Career and Technical Teacher Education

ERIC Educational Resources Information Center

Clark, Robert W.; Threeton, Mark D.; Ewing, John C.

2010-01-01

Since inception, career and technical education programs have embraced experiential learning as a true learning methodology for students to obtain occupational skills valued by employers. Programs have integrated classroom instruction with laboratory experiences to provide students a significant opportunity to learn. However, it is questionable as…

Spontaneous Pneumomediastinum: Case Presentation to a College Student Health Clinic

ERIC Educational Resources Information Center

Spotts, P. Hunter

2017-01-01

The author describes a case of spontaneous pneumomediastinum (SPM) in a 19-year-old man presenting to a college student health clinic. The author also provides a review on SPM, including clinical manifestations, diagnostic evaluation, and management.

Measures of Success: A Survey of Selected Vocational and Technical Education Programs in Florida which Train Students in Occupations Requiring Licenses.

ERIC Educational Resources Information Center

Florida State Advisory Council on Vocational and Technical Education, Tallahassee.

A study of 13 vocational and technical education programs in Florida was conducted which represented an attempt to identify valid and reliable sources of data whereby some vocational programs might be evaluated in specified terms of effectiveness. The programs selected for study were among those which require graduating students to pass licensing…

Enhancing Students' Communication Skills through Problem Posing and Presentation

ERIC Educational Resources Information Center

Sugito; E. S., Sri Mulyani; Hartono; Supartono

2017-01-01

This study was to explore how enhance communication skill through problem posing and presentation method. The subjects of this research were the seven grade students Junior High School, including 20 male and 14 female. This research was conducted in two cycles and each cycle consisted of four steps, they were: planning, action, observation, and…

Radiographic technical quality of root canal treatment performed by a new rotary single-file system.

PubMed

Colombo, Marco; Bassi, Cristina; Beltrami, Riccardo; Vigorelli, Paolo; Spinelli, Antonio; Cavada, Andrea; Dagna, Alberto; Chiesa, Marco; Poggio, Claudio

2017-01-01

The aim of the present study was to evaluate radiographically the technical quality of root canal filling performed by postgraduate students with a new single-file Nickel-Titanium System (F6 Skytaper Komet) in clinical practice. Records of 74 patients who had received endodontic treatment by postgraduate students at the School of Dentistry, Faculty of Medicine, University of Pavia in the period between September 2015 and April 2016 were collected and examined: the final sample consisted 114 teeth and 204 root canals. The quality of endodontic treatment was evaluated by examining the length of the filling in relation to the radiographic apex, the density of the obturation according to the presence of voids and the taper of root canal filling. Chi-squared analysis was used to determine statistically significant differences between the technical quality of root fillings according to tooth's type, position and curvature. The results showed that 75,49%, 82,84% and 90,69% of root filled canals had adequate length, density and taper respectively. Overall, the technical quality of root canal fillings performed by postgraduates students was acceptable in 60,78% of the cases.

Exploring Embedded Remediation for Community College Career Technical Education Pathways: Promising Practices

ERIC Educational Resources Information Center

Cooper, Donna Walters

2014-01-01

Public community colleges enroll nearly half of all undergraduate students in the United States and many of these students are enrolled in 1- and 2-year Career and Technical Education programs. Employers have indicated that colleges should place more emphasis on reading, writing, and critical thinking skills. Career Technical Education can address…

Student Teachers' Perceptions on Educational Technologies' Past, Present and Future

ERIC Educational Resources Information Center

Orhan Goksun, Derya; Filiz, Ozan; Kurt, Adile Askim

2018-01-01

The aim of this study is to reveal Computer Education and Instructional Technologies student teachers', who are in a distance teacher education program, perceptions on past, present and educational technologies of future via infographics. In this study, 54 infographics, which were created by student teachers who were enrolled in Special Teaching…

A Perkins Challenge: Assessing Technical Skills in CTE

ERIC Educational Resources Information Center

Stone, James R., III

2009-01-01

Federal law requires state to develop performance measures and data-collection systems for secondary and postsecondary technical-skill attainment. This poses many challenges, such as defining a technical skills, measurement and when to assess students. In this article, the author outlines various assessment models and looks at the challenges…

Assessing Technical Training Needs.

ERIC Educational Resources Information Center

Schwaller, Anthony E.; Slipy, Dave

1985-01-01

Describes the results of a joint project of St. Cloud State University (Minnesota) and DeZURIK Corporation (a manufacturer and distributor of industrial valves) which developed and implemented a technical training needs questionnaire for use with the company's employees. Student involvement in the process is noted. (MBR)

Soft Skills: The New Curriculum for Hard-Core Technical Professionals

ERIC Educational Resources Information Center

Bancino, Randy; Zevalkink, Claire

2007-01-01

In this article, the authors talk about the importance of soft skills for hard-core technical professionals. In many technical professions, the complete focus of education and training is on technical topics either directly or indirectly related to a career or discipline. Students are generally required to master various mathematics skills,…

Media Matter: The Effect of Medium of Presentation on Student's Recognition of Histopathology.

PubMed

Telang, Ajay; Jong, Nynke De; Dalen, Jan Van

2016-12-01

Pathology teaching has undergone transformation with the introduction of virtual microscopy as a teaching and learning tool. To assess if dental students can identify histopathology irrespective of the media of presentation and if the media affect student's oral pathology case based learning scores. The perception of students towards "hybrid" approach in teaching and learning histopathology in oral pathology was also assessed. A controlled experiment was conduc-ted on year 4 and year 5 dental student groups using a perfor-mance test and a questionnaire survey. A response rate of 81% was noted for the performance test as well as the questionnaire survey. Results show a significant effect of media on performance of students with virtual microscopy bringing out the best performance across all student groups in case based learning scenarios. The order of preference for media was found to be virtual microscopy followed by photomicrographs and light microscopy. However, 94% of students still prefer the present hybrid system for teaching and learning of oral pathology. The study shows that identification of histo-pathology by students is dependent on media and the type of media has a significant effect on the performance. Virtual microscopy is strongly perceived as a useful tool for learning which thus brings out the best performance, however; the hybrid approach still remains the most preferred approach for histopathology learning.

The Influence and Outcomes of High School to College Transition Policy (Tech Prep) for Career and Technical Education Students in Massachusetts

ERIC Educational Resources Information Center

Shaw, Christine

2012-01-01

Over the past two decades, the role of career and technical education has shifted from one preparing students directly for employment, to one that offers vocational training as well as college preparatory academics. To support this effort, the federal government enacted the "Tech Prep Act" Title II under the larger "1990 Carl D.…

Changes in Aspects of Students' Self-Reported Personal, Social and Technical Skills during a Six-Week Wilderness Expedition in Arctic Greenland

ERIC Educational Resources Information Center

Stott, Tim; Hall, Neil

2003-01-01

This investigation focuses on students' self-reported changes in personal, social and technical skills that took place during a six-week long expedition to East Greenland. A 105-item pre-and post-expedition questionnaire was completed by 60 young expeditioners aged 16 to 20. Before the expedition participants generally felt that they had high…

Technical assistance for hazardous-waste reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, F.M.; McComas, C.A.

1987-12-01

Minnesota's Waste Management Board has established, developed, and funded the Minnesota Technical Assistance Program (MnTAP). The MnTAP programs offers technical assistance to generators of hazardous waste by offering telephone and onsite consultation, a waste reduction resource bank, information dissemination, a student intern program, and research awards for waste reduction projects. The program has completed three years of successful operation. The increasing interest in and use of MnTAP's services by hazardous-waste generators has justified the belief that state technical assistance programs have an important role to play in helping generators to reduce their waste production.

Annual Technical Progress Report for Emergency School Assistance Program, Title 45, 1970-71.

ERIC Educational Resources Information Center

Lindsey, Randall B.

This paper presents a technical progress report of two programs conducted with funds provided under the Emergency School Assistance Program. One, the Mobile Learning Unit, said to have been designed to measure changes in fourth and fifth grade students' self-concept in a reorganized desegregated school environment, focuses on whether a positive…

Evaluation of the Relationship between Critical Thinking Skills and Affective Control in Child Training Students of the Female Technical and Vocational College in the City of Broujerd

ERIC Educational Resources Information Center

Esmaeili, Zohreh; Bagheri, Mahdi

2015-01-01

This study is a descriptive-correlational study with the purpose of evaluating the relationship between critical thinking skills and affective control in child training students of the female technical and Vocational College in the city of Broujerd. Statistical population of this study consisted of all students in the field of child training of…

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

Measuring Student Satisfaction from the Student Outcomes Survey. Technical Paper

ERIC Educational Resources Information Center

Fieger, Peter

2012-01-01

The Student Outcomes Survey is an annual national survey of vocational education and training (VET) students. Since 1995, participants have been asked to rate their satisfaction with different aspects of their training, grouped under three main themes: teaching, assessment, and generic skills and learning experiences. While the composition of the…

Comparing the Effects of Objective Structured Assessment of Technical Skills (OSATS) and Traditional Method on Learning of Students.

PubMed

Mansoorian, Mohammad Reza; Hosseiny, Marzeih Sadat; Khosravan, Shahla; Alami, Ali; Alaviani, Mehri

2015-06-01

Despite the benefits of the objective structured assessment of technical skills (OSATS) and it appropriateness for evaluating clinical abilities of nursing students , few studies are available on the application of this method in nursing education. The purpose of this study was to compare the effect of using OSATS and traditional methods on the students' learning. We also aimed to signify students' views about these two methods and their views about the scores they received in these methods in a medical emergency course. A quasi-experimental study was performed on 45 first semester students in nursing and medical emergencies passing a course on fundamentals of practice. The students were selected by a census method and evaluated by both the OSATS and traditional methods. Data collection was performed using checklists prepared based on the 'text book of nursing procedures checklists' published by Iranian nursing organization and a questionnaire containing learning rate and students' estimation of their received scores. Descriptive statistics as well as paired t-test and independent samples t-test were used in data analysis. The mean of students' score in OSATS was significantly higher than their mean score in traditional method (P = 0.01). Moreover, the mean of self-evaluation score after the traditional method was relatively the same as the score the students received in the exam. However, the mean of self-evaluation score after the OSATS was relatively lower than the scores the students received in the OSATS exam. Most students believed that OSATS can evaluate a wide range of students' knowledge and skills compared to traditional method. Results of this study indicated the better effect of OSATS on learning and its relative superiority in precise assessment of clinical skills compared with the traditional evaluation method. Therefore, we recommend using this method in evaluation of students in practical courses.

Engineering and Industrial Fields. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in engineering and industrial fields. A…

Agriculture and Related Businesses. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in agriculture and related businesses. A…

Technical writing in the radiologic technology curriculum.

PubMed

Bell, R

1979-01-01

Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

Statistical Literacy: High School Students in Reading, Interpreting and Presenting Data

NASA Astrophysics Data System (ADS)

Hafiyusholeh, M.; Budayasa, K.; Siswono, T. Y. E.

2018-01-01

One of the foundations for high school students in statistics is to be able to read data; presents data in the form of tables and diagrams and its interpretation. The purpose of this study is to describe high school students’ competencies in reading, interpreting and presenting data. Subjects were consisted of male and female students who had high levels of mathematical ability. Collecting data was done in form of task formulation which is analyzed by reducing, presenting and verifying data. Results showed that the students read the data based on explicit explanations on the diagram, such as explaining the points in the diagram as the relation between the x and y axis and determining the simple trend of a graph, including the maximum and minimum point. In interpreting and summarizing the data, both subjects pay attention to general data trends and use them to predict increases or decreases in data. The male estimates the value of the (n+1) of weight data by using the modus of the data, while the females estimate the weigth by using the average. The male tend to do not consider the characteristics of the data, while the female more carefully consider the characteristics of data.

A Comparative Study of the Critical Thinking Skills among the Students of Accounting and Software in the Female Technical and Vocational University in the City of Borojerd

ERIC Educational Resources Information Center

Bagheri, Mahdi; Nowrozi, Reza Ali

2015-01-01

The purpose of this study is to compare the critical thinking skills among the students of accounting and software in the female technical and vocational university in the city of Borojerd. This study is a descriptive-comparative research. The statistical population of this study includes the female students of accounting and software in the…

A Study of Gestalt Teaching Theory and How It Compares to Standard Air Force Highly Technical Training for Air Force Students

ERIC Educational Resources Information Center

Sutton, Richard J.

2009-01-01

The challenge of delivering effective training to our nation's Military personnel is one that has bested many over the years. How does one instruct young, energetic students on highly technical and often boring material in a manner that makes the best use of the available time? This study used a researcher-designed questionnaire to collect data…

Professional, Technical and Kindred Workers: Where They Come From, Where They Go In The Commonwealth of Pennsylvania. Information For Student Career Planning.

ERIC Educational Resources Information Center

Driscoll, Jeanne Baker; Herr, Edwin L.

Intended for use in occupational and education planning by students and counselors, this document contains information about the 106 occupations which are included in the professional, technical, and kindred workers cluster of the U.S. census. The occupations are grouped by field of interest. For each occupation, the information provided includes…

Student Acceptance and Application of Peer Assessment in a Final Year Genetics Undergraduate Oral Presentation

ERIC Educational Resources Information Center

Verkade, Heather; Bryson-Richardson, Robert J.

2013-01-01

Undergraduate students benefit from observation of each other's oral presentations through both exposure to content and observation of presentation style. In order to increase the engagement and reflection of final year students in an oral presentation task, a peer assessment component was introduced using a rubric that emphasised scientific…

Assessing Quality in Higher Education: New Criteria for Evaluating Students' Satisfaction

ERIC Educational Resources Information Center

Zineldin, Mosad; Akdag, Hatice Camgoz; Vasicheva, Valentina

2011-01-01

The aim of this research is to present a new quality assurance model (5Qs) and to examine the major factors affecting students' perception of cumulative satisfaction. The model includes behavioural dimensions of student satisfaction. The factors included in this cumulative summation are technical, functional, infrastructure, interaction and…

Utilization of case presentations in medical microbiology to enhance relevance of basic science for medical students.

PubMed

Chamberlain, Neal R; Stuart, Melissa K; Singh, Vineet K; Sargentini, Neil J

2012-01-01

Small-group case presentation exercises (CPs) were created to increase course relevance for medical students taking Medical Microbiology (MM) and Infectious Diseases (ID) METHODS: Each student received a unique paper case and had 10 minutes to review patient history, physical exam data, and laboratory data. Students then had three minutes to orally present their case and defend why they ruled in or out each of the answer choices provided, followed by an additional three minutes to answer questions. Exam scores differed significantly between students who received the traditional lecture-laboratory curriculum (Group I) and students who participated in the CPs (Group II). In MM, median unit exam and final exam scores for Group I students were 84.4% and 77.8%, compared to 86.0% and 82.2% for Group II students (P<0.018; P<0.001; Mann-Whitney Rank Sum Test). Median unit and final ID exam scores for Group I students were 84.0% and 80.0%, compared to 88.0% and 86.7% for Group II students (P<0.001; P<0.001). Students felt that the CPs improved their critical thinking and presentation skills and helped to prepare them as future physicians.

Using Television Technology to Teach Technical Writing.

ERIC Educational Resources Information Center

Wallisch, Bill

Technical writing teachers at the U.S. Air Force Academy enhance student motivation by bringing real Air Force writing situations into the classroom through short videotapes which allow students to see how scientists and engineers cope with report writing in their daily work. Also, a special English honors course, which is part of the "Blue…

Moving International Technical Communication Forward: A World Englishes Approach

ERIC Educational Resources Information Center

Bokor, Michael Jarvis Kwadzo

2011-01-01

This article explores how the English language contributes to cross-boundary communication failure and establishes that there is an "English language problem" that has not been adequately addressed in preparing United States native English-speaking students for international technical communication tasks. For example, U.S. technical communication…

Book Review: New Perspectives on Technical Editing

NASA Astrophysics Data System (ADS)

Murphy, A. J. (Ed.); Sterken, Christiaan

2012-08-01

New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

Medical student case presentation performance and perception when using mobile learning technology in the emergency department

PubMed Central

Tews, Matthew; Brennan, Kimberly; Begaz, Tomer; Treat, Robert

2011-01-01

Background Hand-held mobile learning technology provides opportunities for clinically relevant self-instructional modules to augment traditional bedside teaching. Using this technology as a teaching tool has not been well studied. We sought to evaluate medical students’ case presentation performance and perception when viewing short, just-in-time mobile learning videos using the iPod touch prior to patient encounters. Methods Twenty-two fourth-year medical students were randomized to receive or not to receive instruction by video, using the iPod Touch, prior to patient encounters. After seeing a patient, they presented the case to their faculty, who completed a standard data collection sheet. Students were surveyed on their perceived confidence and effectiveness after using these videos. Results Twenty-two students completed a total of 67 patient encounters. There was a statistically significant improvement in presentations when the videos were viewed for the first time (p=0.032). There was no difference when the presentations were summed for the entire rotation (p=0.671). The reliable (alpha=0.97) survey indicated that the videos were a useful teaching tool and gave students more confidence in their presentations. Conclusions Medical student patient presentations were improved with the use of mobile instructional videos following first time use, suggesting mobile learning videos may be useful in medical student education. If direct bedside teaching is unavailable, just-in-time iPod touch videos can be an alternative instructional strategy to improve first-time patient presentations by medical students. PMID:22013378

An Attempt to Improve Students' Presentation Skills via Course of Graduation Research and its Educational Effects

NASA Astrophysics Data System (ADS)

Yamaguchi, Kenji; Ohtuka, Sigeru; Morita, Shinichi; Matsumoto, Itaru; Yakabe, Masaki; Hayamizu, Yasutaka; Ohtuka, Kouichi

The importance of presentation skills rapidly increases in engineering education in Japan. The authors have applied various teaching-method of presentation skills to the course of graduation research for the fifth-grade students of the mechanical engineering program in Yonago National College of Technology. The lectures including teachers' demonstration and basic skills in presentation have resulted in improvement of students' skills. The meeting for announcing the results of graduation research has been opened to the public in cooperation with the Yonago Chamber of Commerce and Industry to give the students incentives to graduation research as well as presentation. The students have mutually evaluated their presentation to get good opportunities for even self-evaluation. This paper discusses the effects and problems of our educational practice.

"Klebsiella Pneumonia" Liver Abscess Syndrome: Case Presentation to a College Student Health Clinic

ERIC Educational Resources Information Center

Woll, Christopher; Spotts, P. Hunter

2016-01-01

The authors describe a case of "Klebsiella pneumoniae" liver abscess (KPLA) in a student presenting to a university student health center. The authors also provide a review of KPLA and invasive "Klebsiella pneumoniae" liver abscess syndrome (IKPLAS), including epidemiology, common clinical manifestations, standard diagnostic…

Introduction of a fresh cadaver laboratory during the surgery clerkship improves emergency technical skills.

PubMed

Nematollahi, Saman; Kaplan, Stephen J; Knapp, Christopher M; Ho, Hang; Alvarado, Jared; Viscusi, Rebecca; Adamas-Rappaport, William

2015-08-01

Student acquisition of technical skills during the clinical years of medical school has been steadily declining. To address this issue, the authors instituted a fresh cadaver-based Emergency Surgical Skills Laboratory (ESSL). Sixty-three medical students rotating through the third-year surgery clerkship participated in a 2-hour, fresh cadaver-based ESSL conducted during the first 2 days of the clerkship. The authors evaluated students utilizing both surgical skills and written examination before the ESSL and at 4 weeks post ESSL. Students demonstrated a mean improvement of 64% (±11) (P < .001) and 38% (±17) (P < .001) in technical skills and clinical knowledge, respectively. When technical skills were compared between cohorts, there were no differences observed in both pre- and post-testing (P = .08). A fresh cadaver laboratory is an effective method to provide proficiency in emergency technical skills not acquired during the clinical years of medical school. Copyright © 2015 Elsevier Inc. All rights reserved.

Internal Consistency of General Outcome Measures in Grades 1-8. Technical Report # 0915

ERIC Educational Resources Information Center

Anderson, Daniel; Tindal, Gerald; Alonzo, Julie

2009-01-01

We developed alternate forms of a math test for use in both screening students at risk of failure and monitoring their progress over time. In this technical report, we present results of the screener, used in the fall of 2009. The 48-item test was aligned to the National Council of Teachers of Mathematics (NCTM) Curriculum Focal Point Standards…

Technical Writing in Hydrogeology.

ERIC Educational Resources Information Center

Tinker, John R., Jr.

1986-01-01

A project for Writing Across the Curriculum at the University of Wisconsin-Eau Claire is described as a method to relate the process of writing to the process of learning hydrology. The project focuses on an actual groundwater contamination case and is designed to improve the technical writing skills of students. (JN)

Diversity in Career and Technical Education On-Line Classrooms: Considering Issues of Gender, Race and Age

ERIC Educational Resources Information Center

Ware, Mary C.; Stuck, Mary F.

2010-01-01

Designers and instructors of courses in career and technical education have realized the value of on-line delivery of instruction during the past several decades. Many students enrolled in career and technical education courses are what have been labeled "non-traditional" students. On-line learning is helpful to these students because it…

Using a Business Framework to Teach Technical Writing to Nonscientists

ERIC Educational Resources Information Center

Devet, Bonnie

2005-01-01

Today, students other than biology, computer science, or physics majors are enrolling in technical writing. English and communication students, seeking lucrative careers as professional writers or editors, are increasingly signing up for the course. Lacking extensive scientific backgrounds, these students may have a difficult time writing about…

Editing in Technical Communication: Theory and Practice in Editing Processes at the Graduate Level.

ERIC Educational Resources Information Center

Masse, Roger E.

At New Mexico State University, technical communication teachers have developed a course to teach editing processes to graduate students who take the advanced workshop in technical and professional communication. In this seminar group, students work on writing processes; editing processes; written, edited, and tested products; and oral processes…

[Factors forming opnion on marijuana legalization in Poland among group of students from medical and technical college faculty].

PubMed

Suwała, Małgorzata; Gerstenkorn, Andrzej; Szewczyk, Anna

2015-01-01

Marijuana is the most popular illegal drug in the world. In 2010 17.6% of polish adult population (age 15-64) and 37.3% of youth (age 17-18) declared use of marijuana at least once in their lifetime. Recent years in Poland brought back public discussion regarding decriminalization and legalization of marijuana. The main goal of the study was to reveal the opinion about legalization of marijuana in Poland among students of medical and technical faculty in correlation with chosen socio-demographic factors, college major, attitude to tobacco smoking, use of drugs and religious practice. Study included 230 students (110 from Medical University of Lodz and 120 from Technical University of Lodz). Women consisted on 56.1% of surveyed and men on 43.9%. Study used audit survey as a research method. Results. 40.4% of students considered marijuana as "soft" drug and in majority (65.7%) are convinced that it is not addictive. The main part of studied group (83%) claimed that marijuana is easily accessible in Poland. The majority of the group (38.75%) was against marijuana legalization, a little bit less (35.2%) approved its legalization in Poland and 26.1% had no opinion. Type of college faculty had not been detected as a factor influencing support for legalization. Important factors influencing positive opinion on legalization was: living in the city, tobacco smoking, socializing with legalization supporters, lack of regular religious practice, drug use. CONCLUSION. Young people's diversified opinion regarding legalization of marijuana in Poland should encourage further discussion. Educational and preventive activities within different social groups are necessary to form a conscious opinion on legalization of marijuana in Poland based on the knowledge of actual scientific facts.

Utilization of case presentations in medical microbiology to enhance relevance of basic science for medical students

PubMed Central

Chamberlain, Neal R.; Stuart, Melissa K.; Singh, Vineet K.; Sargentini, Neil J.

2012-01-01

Background Small-group case presentation exercises (CPs) were created to increase course relevance for medical students taking Medical Microbiology (MM) and Infectious Diseases (ID) Methods Each student received a unique paper case and had 10 minutes to review patient history, physical exam data, and laboratory data. Students then had three minutes to orally present their case and defend why they ruled in or out each of the answer choices provided, followed by an additional three minutes to answer questions. Results Exam scores differed significantly between students who received the traditional lecture-laboratory curriculum (Group I) and students who participated in the CPs (Group II). In MM, median unit exam and final exam scores for Group I students were 84.4% and 77.8%, compared to 86.0% and 82.2% for Group II students (P<0.018; P<0.001; Mann-Whitney Rank Sum Test). Median unit and final ID exam scores for Group I students were 84.0% and 80.0%, compared to 88.0% and 86.7% for Group II students (P<0.001; P<0.001). Conclusion Students felt that the CPs improved their critical thinking and presentation skills and helped to prepare them as future physicians. PMID:22435014

Markets, Availability, Notice, and Technical Performance of Terahertz Systems: Historic Development, Present, and Trends

NASA Astrophysics Data System (ADS)

Hochrein, Thomas

2015-03-01

Although a lot of work has already been done under the older terms "far infrared" or "sub-millimeter waves", the term "terahertz" stands for a novel technique offering many potential applications. The latter term also represents a new generation of systems with the opportunity for coherent, time-resolved detection. In addition to the well-known technical opportunities, an historical examination of Internet usage, as well as the number of publications and patent applications, confirms ongoing interest in this technique. These activities' annual growth rate is between 9 % and 21 %. The geographical distribution shows the center of terahertz activities. A shift from the scientific to more application-oriented research can be observed. We present a survey among worldwide terahertz suppliers with special focus on the European region and the use of terahertz systems in the field of measurement and analytical applications. This reveals the current state of terahertz systems' commercial and geographical availability as well as their costs, target markets, and technical performance. Component cost distribution using the example of an optical pulsed time-domain terahertz system gives an impression of the prevailing cost structure. The predication regarding prospective market development, decreasing system costs and higher availability shows a convenient situation for potential users and interested customers. The causes are primarily increased competition and larger quantities in the future.

Students' Multi-Modal Re-Presentations of Scientific Knowledge and Creativity

ERIC Educational Resources Information Center

Koren, Yitzhak; Klavir, Rama; Gorodetsky, Malka

2005-01-01

The paper brings the results of a project that passed on to students the opportunity for re-presenting their acquired knowledge via the construction of multi-modal "learning resources". These "learning resources" substituted for lectures and books and became the official learning sources in the classroom. The rational for the…

Use of internet technologies for students' communicative competence development in the process of professional foreign language study in technical universities

NASA Astrophysics Data System (ADS)

Khasanova, A. N.

2017-01-01

Problems of mature thinking formation and development of foreign-language professional communicative competence of competitive graduates of technical universities are considered in the article. The most important factors influencing the achievement of high standard of knowledge, students' abilities and skills and increase of their abilities to establish deep meta-subject connections due to Internet technologies in the course of professional foreign language training are analyzed. The article is written on the basis of project material "Network School of National Research Nuclear University MEPhI" aimed at optimization of technological aspect of training. The given academic on-line program assigns to the teacher a part of an organizer who only coordinates creative, academic students' activity.

Florida Study of Career and Technical Education. Final Report

ERIC Educational Resources Information Center

Jacobson, Louis; Mokher, Christine

2014-01-01

A key goal of the "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV") is to ensure career and technical education (CTE) programs are widely available for preparing high school and college students for "high skill, high wage, or high demand occupations in current or emerging professions"…

Collaborating for Success: Team Teaching the Engineering Technical Thesis

ERIC Educational Resources Information Center

Keating, Terrence; Long, Mike

2012-01-01

This paper will examine the collaborative teaching process undertaken at College of the North Atlantic-Qatar (CNA-Q) by Engineering and the Communication faculties to improve the overall quality of engineering students' capstone projects known as the Technical Thesis. The Technical Thesis is divided into two separate components: a proposal stage…

Making the Aural Presentation of Examination Papers Student Friendly: An Alternative to a Reader in Examinations

ERIC Educational Resources Information Center

Makeham, Sheila; Lee, Charles

2012-01-01

Where a student can benefit from having an examination paper presented aurally, the traditional method is to provide a reader. This can be socially uncomfortable for students, and offers of readers are frequently declined. A trial is reported in which examinations were presented on an Apple iPod. This is a medium with which many students are…

Sex Equity: Recruitment and Retention of Non-Traditional Students.

ERIC Educational Resources Information Center

Mewhorter, V. Carolyn

This document contains the materials required to present two courses that were developed during a project to increase the recruitment/retention of women in technical education programs. Presented first is Developing Mechanical/Electrical Aptitude, a 30-hour course to improve students' (primarily women's) mechanical and electrical aptitude and…

Trends in Career and Technical Education Enrollment in Florida High Schools, and the Relation to Graduation and Students Earning Industry-Recognized Certifications

ERIC Educational Resources Information Center

Tamar-Belgraves, Myrna Irva

2016-01-01

Career and technical education (CTE) has been at the forefront of engagement, change, motivation, and high school reform since the early 20th century. However, the focus on tracking students into 4-year universities has significantly reduced the number of quality CTE programs that exist within the high school setting. With the release of the new…

Precollege (Remedial) Education. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

Washington's community and technical colleges are fundamentally transforming precollege (remedial) education to move students faster into credit-bearing classes. The state's colleges are working with high schools to prevent the need for remediation. They are also shortening the path for college students of all ages who need the extra help. Courses…

Creating an Early Warning System: Predictors of Dropout in Delaware. REL Mid-Atlantic Technical Assistance Brief. REL MA 1.2.75-10

ERIC Educational Resources Information Center

Uekawa, Kazuaki; Merola, Stacey; Fernandez, Felix; Porowski, Allan

2010-01-01

This Technical Brief presents an historical analysis of key indicators of dropout for Delaware students in grades 9-12. Cut points for key risk indicators of high school dropout for the State of Delaware are provided. Using data provided by the Delaware Department of Education (DDOE), relationships between student dropout and several student…

Do Disadvantaged Students Get Less Effective Teaching? Key Findings from Recent Institute of Education Sciences Studies. NCEE Evaluation Brief. Technical Appendix. NCEE 2014-4010

ERIC Educational Resources Information Center

Max, Jeffrey; Glazerman, Steven

2014-01-01

This document represents the technical appendix intended to accompany "Do Disadvantaged Students Get Less Effective Teaching? Key Findings from Recent Institute of Education Sciences Studies. NCEE Evaluation Brief. NCEE 2014-4010." Contents include: (1) Summary of Related, Non-Peer-Reviewed Studies; (2) Methods for Comparing Findings…

Does a Curriculum Integration Intervention to Improve the Mathematics Achievement of Students Diminish Their Acquisition of Technical Competence? An Experimental Study in Agricultural Mechanics

ERIC Educational Resources Information Center

Parr, Brian A.; Edwards, M. Craig; Leising, James G.

2008-01-01

The purpose of this study was to empirically test the hypothesis that students who participated in a contextualized, mathematics-enhanced high school agricultural power and technology curriculum and aligned instructional approach would not experience significant diminishment in acquisition of technical skills related to agricultural power and…

Using sentence combining in technical writing classes

NASA Technical Reports Server (NTRS)

Rosner, M.; Paul, T.

1981-01-01

Sentence combining exercises are advanced as a way to teach technical writing style without reliance upon abstractions, from which students do not learn. Such exercises: (1) give students regular writing practice; (2) teach the logic of sentence structure, sentence editing, and punctuation; (3) paragraph development and organization; and (4) rhetorical stance. Typical sentence, paragraph, and discourse level sentence combining exercises are described.

Vocational-Technical Education Today.

ERIC Educational Resources Information Center

American Vocational Association, Alexandria, VA.

Vocational-technical education (VTE) today encompasses a diverse array of programs to equip students with work and life skills. A widening skills gap in the nation's work force, coupled with the fact that only about 20% of the nation's current jobs require a four-year college degree, has made VTE more important than ever before. Research has…

Raising the Bar: Technical Assessments for Secondary CTE Programs

ERIC Educational Resources Information Center

Uy, Erin; Green, Kimberly

2009-01-01

Having a strong connection to the employer community, career technical education (CTE) has long understood the importance of students being armed with industry recognized credentials and certificates as they enter the workplace. The enactment of the Carl D. Perkins Career and Technical Education Act in 2006, commonly referred to as Perkins IV,…

Medical student case presentation performance and perception when using mobile learning technology in the emergency department.

PubMed

Tews, Matthew; Brennan, Kimberly; Begaz, Tomer; Treat, Robert

2011-01-01

Hand-held mobile learning technology provides opportunities for clinically relevant self-instructional modules to augment traditional bedside teaching. Using this technology as a teaching tool has not been well studied. We sought to evaluate medical students' case presentation performance and perception when viewing short, just-in-time mobile learning videos using the iPod touch prior to patient encounters. Twenty-two fourth-year medical students were randomized to receive or not to receive instruction by video, using the iPod Touch, prior to patient encounters. After seeing a patient, they presented the case to their faculty, who completed a standard data collection sheet. Students were surveyed on their perceived confidence and effectiveness after using these videos. Twenty-two students completed a total of 67 patient encounters. There was a statistically significant improvement in presentations when the videos were viewed for the first time (p=0.032). There was no difference when the presentations were summed for the entire rotation (p=0.671). The reliable (alpha=0.97) survey indicated that the videos were a useful teaching tool and gave students more confidence in their presentations. Medical student patient presentations were improved with the use of mobile instructional videos following first time use, suggesting mobile learning videos may be useful in medical student education. Clinical educators should consider whether, in an instance where live bedside or direct interactive teaching is unavailable, using just-in-time educational videos on a handheld device might be useful as a supplemental instructional strategy.

Accommodating Student Diversity in Remote Sensing Instruction.

ERIC Educational Resources Information Center

Hammen, John L., III.

1992-01-01

Discusses the difficulty of teaching computer-based remote sensing to students of varying levels of computer literacy. Suggests an instructional method that accommodates all levels of technical expertise through the use of microcomputers. Presents a curriculum that includes an introduction to remote sensing, digital image processing, and…

Postgraduate Training in Student Learning and Teaching.

ERIC Educational Resources Information Center

Alpay, E.; Mendes-Tatsis, M. A.

2000-01-01

Presents an experiential postgraduate training program for student learning and supervision involving laboratory and pilot plant supervisions in the chemical engineering field. The program addresses some of the current concerns about non-technical training and the further development of the broad science and engineering knowledge of postgraduate…

Some technical writing skills industry needs

NASA Technical Reports Server (NTRS)

Smith, F. R.

1981-01-01

It is suggested that engineers and other technical students be taught three classes of skills in technical writing. First, "Big Picture Things", which includes: the importance of clear writing, the wide scope of writing, the wide scope of writing tasks that will be faced in industry, and the principles of organization of technical materials such as; how to analyze, classify, partition, and interpret. Second, "Writing Procedures", which encompasses: how to get words on paper efficiently and team-write. Third, "Writing Details", in which two considerations are important: how to achieve precision in the use of language and the aspects of style. Three problems in style are cited: the problem of sentence transition, overuse of attributive adjectives, and verbosity in paragraph structure. The most important thing in technical writing is considered to be functionality, economy and clarity.

The Assessment of Student PowerPoint Presentations--Attempting the Impossible?

ERIC Educational Resources Information Center

Dobson, Stephen

2006-01-01

Assessing students through their Microsoft PowerPoint presentations might be thought to be impossible, a waste of time or a fascination with new technology which will pass sooner or later. However, to make a judgement on such assertions requires examining the strengths and weaknesses of such a form of assessment. Examples within an academic…

Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

Students' Perception of Daylight Illumination in the School Workshop as a Determinant for Effective Students' Task Performance in Workshop Practice

ERIC Educational Resources Information Center

Amasuomo, Japo Oweikeye Morto; Alio, Abigail Ngozi

2013-01-01

The study investigated daylight illumination in the school workshop as a determinant for effective students' task performance in workshop practice. 183 NCE Technical students in 300 Level which comprised of 73 and 112 students from Federal Colleges of Education (Technical), Asaba and Omoku, Nigeria respectively during the 2008/2009 academic…

Ubiquitous Presenter: A Tablet PC-based System to Support Instructors and Students

NASA Astrophysics Data System (ADS)

Price, Edward; Simon, Beth

2009-12-01

Digital lecturing systems (computer and projector, often with PowerPoint) offer physics instructors the ability to incorporate graphics and the power to share and reuse materials. But these systems do a poor job of supporting interaction in the classroom. For instance, with digital presentation systems, instructors have limited ability to spontaneously respond to student questions. This limitation is especially acute during classroom activities such as problem solving, Peer Instruction, and Interactive Lecture Demonstrations (ILDs).2 A Tablet PC, a laptop computer with a stylus that can be used to "write" on the screen, provides a way for instructors to add digital ink spontaneously to a presentation in progress. The Tablet PC can be a powerful tool for teaching,3,4 especially when combined with software systems specifically designed to leverage digital ink for pedagogical uses. Ubiquitous Presenter (UP) is one such freely available system.5 Developed at the University of California, San Diego, and based on Classroom Presenter,6 UP allows the instructor to ink prepared digital material (such as exported PowerPoint slides) in real time in class. Ink is automatically archived stroke by stroke and can be reviewed through a web browser (by both students and instructors). The system also supports spontaneous in-class interaction through a web interface—students with web-enabled devices (Tablet PCs, regular laptops, PDAs, and cell phones) can make text-, ink-, or image-based submissions on the instructor's slides. The instructor can review and then project submitted slides to the class and add additional ink, so that material generated by students can be a focus for discussion. A brief video showing UP in action is at http://physics.csusm.edu/UP. In this article, we describe UP and give examples of how UP can support the physics classroom.

Student perceptions of the use of presentations as a method of learning endocrine and gastrointestinal pathophysiology.

PubMed

Higgins-Opitz, Susan B; Tufts, Mark

2010-06-01

Second-year medical students at the Nelson R. Mandela School of Medicine (Durban, South Africa) were given a brief to prepare oral presentations on topics related to disorders of the gastrointestinal tract and endocrine system in the form of "patient-doctor" role play and to submit written documents about their topics. This initiative was introduced to assist medical students in their application and understanding of physiology to clinical situations. The aims of the student presentations were to improve the understanding of the physiological basis of diseases; promote independent research, active, and group-based learning; encourage social interactions; and develop presentation and peer review skills. Students rose to the challenge, producing a variety of presentations reflecting a wealth of creativity, humour, sensitivity to local cultural issues, and analytic thinking skills. The quality of the supporting posters and computer-generated slides was outstanding. Numerous "fun" prizes for specific individual and group performances were given based on peer and staff evaluations. This exercise ran over a 5-yr period before the introduction of a problem-based learning medical curriculum. Student feedback obtained over these years is reported here. Students were asked to complete semistructured questionnaires, which elicited feedback on various aspects of the learning exercise, including whether it should be continued and how it could be improved upon, especially if they were in groups that did not function well. The feedback obtained revealed that most students perceived the presentations to be fun, informative, creative/innovative, and, most importantly, beneficial to their learning. The majority of students felt that this exercise improved their understanding of pathophysiology, taught them to research independently, and encouraged better class interactions and group learning. The inclusion of such initiatives is beneficial not only to students' understanding and

Personal protective equipment use among students with special health care needs reporting injuries in school-sponsored vocational, career, and technical education programs in New Jersey.

PubMed

Rubenstein, Eric; Shendell, Derek; Eggert, Brain C; Marcella, Stephen W

2014-01-01

Students with special health care needs (SHCNs) and individualized education plans (IEPs) may be injured more often in vocational, career, and technical education (CTE) programs. No research to date considers personal protective equipment (PPE) use among students with SHCNs in school-based programs reporting injuries to agencies. Data from 1999 to 2011 on PPE use among injured students in CTE programs in public schools and private secondary schools for the disabled were analyzed; students with SHCNs were distinguished by IEP status within New Jersey Safe Schools surveilance data. Among students with IEPs using PPE, 36% of injuries occurred to body parts PPE was meant to protect. Likely injury types were cuts-lacerations and burns for students with IEPs using PPE and cuts-lacerations and sprains for students with IEPs not using PPE. Females with IEPs using PPE were injured less often than males across ages. Results suggested students with SHCNs with IEPs need further job-related training with increased emphasis on properly selecting and fitting PPE.

Guidelines for Establishing and Evaluating High School Technical Electromechanics Programs.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Technical and Adult Education.

Educators and industrial representatives developed these guidelines for school officials, instructors in technical education, and program and facility planners to use in planning a high school program in technical electromechanics. Designed to train students for entry into industry in applied electromechanics, the program includes electricity,…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

Health Activities for Primary School Students.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This manual targets new and second-year Peace Corps volunteers, presenting health lessons and activities for primary school students in Thailand. Each section of the manual outlines basic technical information about the topic, contains several detailed lesson plans, and lists quick activities that can be carried out at schools. Songs and recipes…

Vocational Curriculum Modification. Teaching Technical Language to Learning Handicapped Students. Project HIRE: A Curriculum Management System for Instructing the Handicapped. Final Report, Volume 1.

ERIC Educational Resources Information Center

Gardner, David C.; And Others

Volume 1 of the final report on Project HIRE reports the design, development, field-testing, and refining of self-instructional packages to teach entry level technical vocabulary to learning handicapped students mainstreamed in vocational programs. Volume 2, a management handbook, reports the methods and findings concerning development of…

Technical writing practically unified through industry

NASA Technical Reports Server (NTRS)

Houston, L. S.

1981-01-01

General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

The Role of Student Support Services in Encouraging Student Involvement and Its Impact on Student Perceptions and Academic Experiences

ERIC Educational Resources Information Center

Kelley-Hall, Caren

2010-01-01

The purpose of this study was to explore the role of Student Support Services (SSS) in encouraging student involvement and its impact on student perceptions and academic experiences in three technical colleges in upstate South Carolina. By examining Alexander Astin's theory of student involvement in the services provided by the program, a better…

Improving Sex Equity in Postsecondary Vocational/Technical Programs: A Resource Manual.

ERIC Educational Resources Information Center

Lovelace, Bill E.; And Others

This manual was developed to assist postsecondary administrators, faculty, staff, and students by providing materials specifically designed to eliminate sex bias and stereotyping of students and to recruit students into nontraditional careers and vocational-technical programs. The manual is organized in six sections. The first section introduces…

Astronomy Books of 1985: The Technical List.

ERIC Educational Resources Information Center

Fraknoi, Andrew

1986-01-01

Consists of the second part of the 1985 annotated review of technical books done by the Astronomical Society of the Pacific. This listing was primarily designed for graduate students or research scientists. (TW)

APTI Course 427, Combustion Evaluation. Student Manual.

ERIC Educational Resources Information Center

Beard, J. Taylor; And Others

This student manual supplements a course designed to present fundamental and applied aspects of combustion technology which influence air pollutant emissions. Emphasis is placed on process control of combustion rather than on gas cleaning. The course is intended to provide engineers, regulatory and technical personnel, and others with familiarity…

The Culture of Futility and Its Impact on Study Culture in Technical/Vocational Schools in Belgium

ERIC Educational Resources Information Center

Van Houtte, Mieke; Stevens, Peter A. J.

2010-01-01

Starting from the present knowledge society with its social overvaluing of cognition and white-collar jobs at the expense of manual labour, this article examines whether school type--academic versus technical/vocational schools--relates to students' sense of futility. It assesses the schools' culture of futility and investigates the explanatory…

A Study on the Impact of Collective Feedback in the Online Technical and Professional Communication Classroom

ERIC Educational Resources Information Center

Singleton, Meredith

2016-01-01

This dissertation study seeks to determine whether feedback in the online Technical and Professional Communication classroom impacts student performance. This dissertation proposes that online Technical and Professional Communication instructors consider adopt such a feedback methodology in order to engage students with writing practices that…

Michigan Technician Need Study. The Present and Projected Demand for Technically Trained People in Michigan.

ERIC Educational Resources Information Center

Ferris State Coll., Big Rapids, MI. Office of Administrative Studies.

This study undertakes to determine (1) the extent of crucial manpower shortages in Michigan by technical area and skill, by the areas of occupation or industry, and whether these shortages will decrease or increase over the next few years, and (2) the opportunities for technical education now available or necessary to assure Michigan industry and…

Vermont Technical Education Commission Report.

ERIC Educational Resources Information Center

Vermont State Technical Education Commission, Montpelier.

A 1968 New England Regional Commission grant to the Vermont Department of Administration financed a feasibility study for a technical college at the postsecondary level. The commission undertook two specific studies: an examination of ultimate career destinations of Vermont secondary students and a survey of Vermont industry to determine immediate…

Washington's Community and Technical Colleges' Student Achievement Initiative: Lessons Learned since the 2012 Revision and Considerations for New Allocation Model. Research Report 16-1

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2016

2016-01-01

In January 2012, a system-wide task force came together for a nearly year-long process of revising the community and technical college system's performance-based funding (PBF) system, the Student Achievement Initiative. This review was consistent with national experts' recommendations for continuous evaluation of PBF systems to ensure overall…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 61: The Technical Communications Practices of ESL Aerospace Engineering Students in the United States: Results of a National Survey

NASA Technical Reports Server (NTRS)

Webb, John R.; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1997-01-01

When engineering students graduate and enter the world of work, they make the transition from an academic to a professional community of knowledge. The importance of oral and written communication to the professional success and advancement of engineers is well documented. For example, studies such as those conducted by Mailloux (1989) indicate that communicating data, information, and knowledge takes up as much as 80% of an engineer's time. However, these same studies also indicate that many engineering graduates cannot (a) write technical reports that effectively inform and influence decisionmaking, (b) present their ideas persuasively, and (c) communicate with their peers. If these statements are true, how is learning to communicate effectively in their professional knowledge community different for engineering students educated in the United States but who come from other cultures-cultures in which English is not the primary language of communication? Answering this question requires adequate and generalizable data about these students' communications abilities, skills, and competencies. To contribute to the answer, we undertook a national (mail) survey of 1,727 student members of the American Institute of Aeronautics and Astronautics (AIAA). The focus of our analysis and this paper is a comparison of the responses of 297 student members for whom English is a second language with the responses of 1,430 native English speaking students to queries regarding career choice, bilingualism and language fluency, communication skills, collaborative writing, computer use, and the use of electronic (computer) networks.

A Study of the Characteristics of Students, Teachers, and the Curriculum of Industrial-Technical Education in the Public Community Junior Colleges of Michigan.

ERIC Educational Resources Information Center

Larson, Milton Erving

Observations were made on the characteristics of students, teachers, and curricula of the industrial-technical programs of Michigan junior colleges. Of the 138 teachers, 75 were employed by five colleges, 50% had a master's degree, many had a BA in industrial arts, 65% had up to 12 semester hours in teaching methods, the median for subject matter…

Technical and Vocational Education in Kuwait.

ERIC Educational Resources Information Center

Al-Ali, Salahaldeen

1993-01-01

The Kuwaiti system of vocational-technical education has not lived up to expectations because of low student aptitude, lack of managerial and academic facilities, and weak industrial linkages. The Gulf War exacerbated skilled labor shortages, leaving the country dependent on expatriates. (SK)

When a Group Presentation Isn't Enough: Financial Aid Advising for Low-Income Urban College-Bound Students

ERIC Educational Resources Information Center

Venegas, Kristan M.; Hallett, Ronald E.

2008-01-01

Group presentations are an easy way to reach large groups of students and parents at one time. When group presentations are well done, they increase students' and families' knowledge of the financial aid process by providing information and building students' and their families' confidence as they navigate the financial aid process. Unfortunately,…

An Assessment of Individualized Instruction in Navy Technical Training,

DTIC Science & Technology

1979-11-01

PAGE(Wh... D.i. Eni.r .d) 2O~ ’\\ ~management information systems , training of instructors and managers ,terminology , student —instructor incentives...Navy commitment to II is most visible in CMI. FY 78 data show an approximate student AOB and throughput for CMI courses of 7,000 and 65,000...respectively. There are an additional 3,000 student AOB and 59,000 student throughput for II courses which are not computer managed . CAl usage in technical

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glasser, Alan H.

Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

Field Testing Competency-Based Vocational Education Student Learning Guides Developed at Ridge Vocational-Technical Center. From August 1, 1981 to June 30, 1982. Final Report.

ERIC Educational Resources Information Center

Andreyka, Robert E.

This project's main objective was to field test competency-based vocational education (CBVE) student learning guides developed during 1979-1981 at Ridge Vocational-Technical Center (RVTC) (Florida). The learning guides were for six programs: clerical occupations, cosmetology, heavy duty truck/bus mechanics, industrial electricity, masonry, and…

The Annual Career and Technical Education High School Report, 2007

ERIC Educational Resources Information Center

Iowa Department of Education, 2007

2007-01-01

This report, the first "Annual Career and Technical Education High School Report" was created to serve as a rich resource for educators, school and college administrators, policymakers, and other citizens by providing essential summative data on career and technical education in Iowa at the high school level. Students increasingly need…

Using Paper Presentation Breaks during Didactic Lectures Improves Learning of Physiology in Undergraduate Students

ERIC Educational Resources Information Center

Ghorbani, Ahmad; Ghazvini, Kiarash

2016-01-01

Many studies have emphasized the incorporation of active learning into classrooms to reinforce didactic lectures for physiology courses. This work aimed to determine if presenting classic papers during didactic lectures improves the learning of physiology among undergraduate students. Twenty-two students of health information technology were…

Surprising Beauty in Technical Photography

ERIC Educational Resources Information Center

Davidhazy, Andrew

2009-01-01

The Imaging and Photographic Technology area, in which the author teaches, is an applications- and technology-oriented photography program designed to prepare students for work in technical, corporate, industrial, and scientific environments. One day, the author received an e-mail message from an editor who had found his Web site and thought he…

Cross-Validation of easyCBM Reading Cut Scores in Washington: 2009-2010. Technical Report #1109

ERIC Educational Resources Information Center

Irvin, P. Shawn; Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Washington state. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 900 students per grade, randomly split into two…

Cross-Validation of easyCBM Reading Cut Scores in Oregon: 2009-2010. Technical Report #1108

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Oregon. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 2,000 students per grade, randomly split into two groups of…

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

The Need for Consumer Relations in Technical Education.

ERIC Educational Resources Information Center

Isberner, Fred R.; Armstrong, Connie

1995-01-01

Technical education curricula should include the topical area of customer relations. Students need to learn how to listen to customers, handle complaints, monitor quality, and understand customer satisfaction. (SK)

Making Connections between Coastal Landscapes and Coastal Ecosystems (Presentation to Graduate Students)

EPA Science Inventory

This presentation is to graduate students in Integrated Biological Sciences. It intends to illustrate a problem and the accompanying research and development approach to designing a broad scale monitoring and assessment strategy.

The Impact of Special Education Law on Career and Technical Education

ERIC Educational Resources Information Center

Dieterich, Cynthia A.; Smith, Kristian J.

2015-01-01

Career and technical education (CTE) provides students of all ability levels the opportunity to develop skills for a post-secondary career. When students with disabilities are included in CTE, educators are legally required to provide an appropriate program that meets each student's unique needs. There are, however, few discussions in the…

Exploring Atypical Verb+Noun Combinations in Learner Technical Writing

ERIC Educational Resources Information Center

Luzon Marco, Maria Jose

2011-01-01

Professional and academic discourse is characterised by a specific phraseology, which usually poses problems for students. This paper investigates atypical verb+noun collocations in a corpus of English technical writing of Spanish students. I focus on the type of verbs that most frequently occurred in these awkward or questionable combinations and…

Engineering Technical Review Planning Briefing

NASA Technical Reports Server (NTRS)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Functional Vision Observation. Technical Assistance Paper.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Bureau of Education for Exceptional Students.

Technical assistance is provided concerning documentation of functional vision loss for Florida students with visual impairments. The functional vision observation should obtain enough information for determination of special service eligibility. The observation is designed to supplement information on the medical eye examination, and is conducted…

Use of information and communication technologies for teaching physics at the Technical University

NASA Astrophysics Data System (ADS)

Polezhaev, V. D.; Polezhaeva, L. N.; Kamenev, V. V.

2017-01-01

The paper discusses the ways to improve methods and algorithms of the automated control of knowledge, approaches to the establishment and effective functioning of electronic teaching complexes, which include tests of a new generation, and their use is not limited control purpose only. Possibilities of computer-based testing system SCIENTIA are presented. This system is a tool to automate the control of knowledge that can be used for the assessment and monitoring of students' knowledge in different types of exams, self-control of students' knowledge, making test materials, creating a unified database of tests on a wide range of subjects etc. Successful operation of informational system is confirmed in practice during the study of the course of physics by students at Technical University.

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

The Educational and Technical Courses in the ELT Program in Turkey: Do They Contribute to ICT Skills?