Science.gov

Sample records for 1-butyl-3-methylimidazolium bromide bmimbr

  1. Ultrasound-promoted catalyst-free one-pot four component synthesis of 2H-indazolo[2,1-b]phthalazine-triones in neutral ionic liquid 1-butyl-3-methylimidazolium bromide.

    PubMed

    Shekouhy, Mohsen; Hasaninejad, Alireza

    2012-03-01

    A catalyst-free one-pot four component methodology for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones under ultrasonic irradiation at room temperature using 1-butyl-3-methylimidazolium bromide, [Bmim]Br, as a neutral reaction medium is described. A broad range of structurally diverse aldehydes (aromatic aldehydes bearing electron withdrawing and/or electron releasing groups as well as heteroaromatic aldehydes) were applied successfully, and corresponding products were obtained in good to excellent yields without any byproduct.

  2. Electrochemical and Thermodynamic Properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) in 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid

    PubMed Central

    Yang, Xiao; He, Ling; Qin, Song; Tao, Guo-Hong; Huang, Ming; Lv, Yi

    2014-01-01

    The electrochemical behavior and thermodynamic properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) were studied in 1-butyl-3-methylimidazolium bromide ionic liquid (BmimBr) at a glassy carbon (GC) electrode in the range of 293–338 K. The electrode reaction of Eu(III) was found to be quasi-reversible by the cyclic voltammetry, the reactions of the other three lanthanide ions were regarded as irreversible systems. An increase of the current intensity was obtained with the temperature increase. At 293 K, the cathodic peak potentials of −0.893 V (Eu(III)), −0.596 V (Sm(III)), −0.637 V (Dy(III)) and −0.641 V (Nd(III)) were found, respectively, to be assigned to the reduction of Ln(III) to Ln(II). The diffusion coefficients (Do), the transfer coefficients (α) of Ln(III) (Ln = Eu, Sm, Dy, Nd) and the charge transfer rate constants (ks) of Eu(III) were estimated. The apparent standard potential (E0*) and the thermodynamic properties of the reduction of Eu(III) to Eu(II) were also investigated. PMID:24752584

  3. Calorimetric determination of the enthalpy of 1-butyl-3-methylimidazolium bromide synthesis: a key quantity in thermodynamics of ionic liquids.

    PubMed

    Paulechka, Yauheni U; Kabo, Andrey G; Blokhin, Andrey V

    2009-11-05

    The enthalpy of the 1-butyl-3-methylimidazolium bromide [C(4)mim]Br ionic liquid synthesis reaction 1-methylimidazole (liq) + 1-bromobutane (liq) --> [C(4)mim]Br (liq) was determined in a homemade small-volume isoperibol calorimeter to be Delta(r)H degrees (298) = -87.7 +/- 1.6 kJ x mol(-1). The activation energy for this reaction in a homogeneous system E(A) = 73 +/- 4 kJ x mol(-1) was found from the results of calorimetric measurements. The formation enthalpies for the crystalline and liquid [C(4)mim]Br were determined from the calorimetric data: Delta(f)H degrees (298)(cr) = -178 +/- 5 kJ x mol(-1) and Delta(f)H degrees (298)(liq) = -158 +/- 5 kJ x mol(-1). The ideal-gas formation enthalpy of this compound Delta(f)H degrees (298)(g) = 16 +/- 7 kJ x mol(-1) was calculated using the methods of quantum chemistry and statistical thermodynamics. The vaporization enthalpy of [C(4)mim]Br, Delta(vap)H degrees (298) = 174 +/- 9 kJ x mol(-1), was estimated from the experimental and calculated formation enthalpies. It was demonstrated that vapor pressure of this ionic liquid cannot be experimentally determined.

  4. TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

    PubMed

    Gao, Yanan; Han, Shuaibing; Han, Buxing; Li, Ganzuo; Shen, Dong; Li, Zhonghao; Du, Jimin; Hou, Wanguo; Zhang, Gaoyong

    2005-06-21

    Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C. The water-in-bmimPF6, bicontinuous, and bmimPF6-in-water microregions of the microemulsions were identified by cyclic voltammetry method using potassium ferrocyanide K4Fe(CN)6 as the electroactive probe. Dynamic light scattering (DLS) and the UV-vis method were used to characterize the microemulsions. It was demonstrated that the hydrodynamic diameter (Dh) of the bmimPF6-in-water microemulsions is nearly independent of the water content but increases with increasing bmimPF6 content due to the swelling of the micelles by the ionic liquid. The UV-vis further confirmed the existence of water domains in the water-in-bmimPF6 microemulsions, and the salt potassium ferricyanide K3Fe(CN)6 could be dissolved in the water domains.

  5. Characterization of cellulose II nanoparticles regenerated from ionic liquid, 1-butyl-3-methylimidazolium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC)and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in ...

  6. Acute toxicity, biochemical toxicity and genotoxicity caused by 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium tetrafluoroborate in zebrafish (Danio rerio) livers.

    PubMed

    Zhang, Cheng; Shao, Yuting; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Guo, Yingying

    2017-02-21

    The present study examined the potential toxicity of 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3- methylimidazolium tetrafluoroborate ([Bmim]BF4) in the liver cells of zebrafish (Danio rerio) with different doses (20-160mg/L) on 7 and 14days. The effects of [Bmim]Cl and [Bmim]BF4 on acute toxicity, reactive oxygen species (ROS), antioxidant enzymes, glutathione S-transferase (GST), malondialdehyde (MDA), and DNA damage degree in livers of zebrafish were determined. The 50% lethal concentration (LC50) values after a 96-h exposure to [Bmim]Cl and [Bmim]BF4 were 632.8±67.4 and 604.6±56.2mg/L, respectively, which indicated that the substances were practically harmless. The minor discrepancy may be caused by the different anions. The ROS levels were dose-dependent, which may cause the inhibition of antioxidant enzyme activity, lipid peroxidation, DNA damage and the stimulation of detoxifying enzyme activity. The present study can also provide scientific support for the future selection and evaluation of ionic liquids (ILs).

  7. MICROWAVE-ASSISTED PREPARATION OF 1-BUTYL-3-METHYLIMIDAZOLIUM TETRACHLOROGALLATE AND ITS CATALYTIC USE IN ACETAL FORMATION UNDER MILD CONDITIONS

    EPA Science Inventory

    1-Butyl-3-methylimidazolium tetrachlorogallate, [bmim][GaCl4], prepared via microwave-assisted protocol, is found to be an active catalyst for the efficient acetalization of aldehydes under mild conditions.

  8. Asymmetric criticality of binary ionic solutions containing 1-butyl-3-methylimidazolium tetrafluoroborate and alcohol.

    PubMed

    Yin, Tianxiang; Xu, Chen; Lv, Hekun; Liu, Shixia; Wang, Mingjie; Chen, Zhiyun; Shen, Weiguo

    2014-09-07

    The liquid-liquid coexistence curves for binary solutions {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 1-propanol} and {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 2-propanol} have been precisely measured. The values of the critical exponents β obtained from the liquid-liquid equilibrium data in the critical region confirmed the 3D-Ising universality. The isobaric heat capacities per unit volume were measured for {[C4mim][BF4] + 1-propanol (or 2-propanol, 1,3-propanediol, 1,4-butanediol)} in both critical and non-critical regions. The experimental results indicate a major solvophobic contribution to the criticality for the studied ionic solutions. The complete scaling theory was applied to well represent the asymmetric behavior of the diameter of the coexistence curves with the consideration of the heat capacity contribution. It was found that the contribution of the heat capacity related term in the ionic solution decreased with the increase of the permittivity of alcohol and was more important in the description of the asymmetry of the coexistence curve of the ionic solutions than that of the molecular solutions.

  9. Phase behavior and microstructure of microemulsions containing the hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate.

    PubMed

    Anjum, Nishat; Guedeau-Boudeville, Marie-Alice; Stubenrauch, Cosima; Mourchid, Ahmed

    2009-01-08

    The phase behavior and microstructure of the ternary system water/1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6))/Triton X-100 was studied as a function of temperature and ionic liquid (IL) mass fraction alpha. In the present study, a hydrophobic IL instead of commonly used organic solvents such as n-alkanes is used. The fish-shaped region is distorted at low and high values of alpha, whereas it is symmetric at intermediate alpha. With increasing alpha, the extension of the three-phase region decreases regarding the surfactant concentration range, whereas it increases regarding the temperature range. For comparison the phase behavior of two ternary water/bmimPF(6)/alkyl oligoethyleneoxide (C(i)E(j)) systems has been investigated. Our results are compared with those obtained for water/n-alkane/C(i)E(j) and IL/n-alkane/C(i)E(j) systems, respectively.

  10. Green polymer electrolytes based on chitosan and 1-butyl-3-methylimidazolium acetate

    SciTech Connect

    Shamsudin, Intan Juliana; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2014-09-03

    Green polymer electrolytes based on chitosan as the polymer matrix and ionic liquid 1-butyl-3-methylimidazolium acetate [Bmim][OAc] as charge carriers were prepared by solution casting technique. Complexes with various amount of ionic liquid loading were investigated as possible ionic conducting polymers. The ionic conductivity was found to increase with increasing weight percent of ionic liquid. The highest ionic conductivity of the charged chitosan-[Bmim][OAc] was 2.44 × 10{sup −3} S cm{sup −1} at 90 wt.% of [Bmim][OAc] content at ambient temperature. Attenuated Total Reflection Fourier Transform infrared (ATR-FTIR) spectroscopy has proven the interaction between chitosan and [Bmim][OAc]. X-ray Diffraction (XRD) has shown that the amorphosity of the complexes increase as the amount of [Bmim][OAc] increase.

  11. FE-SEM observation of swelled seaweed using hydrophilic ionic liquid; 1-butyl-3-methylimidazolium tetrafluoroborate.

    PubMed

    Takahashi, Chisato; Shirai, Takashi; Fuji, Masayoshi

    2013-01-01

    The method to observe the exact morphology of swelled seaweed as an example of biological material by field emission scanning electron microscopy (FE-SEM) with the aid of hydrophilic ionic liquid (IL); 1-butyl-3-methylimidazolium tetrafluoroborate is reported. Seaweed was first swelled in 3.5% NaCl solution and then treated with the IL and water mixture in 1:7 weight ratios and centrifuged to remove the excess IL solution. Thus treated seaweed maintained its morphology even at high magnification and did not show drying in the FE-SEM chamber. This observation technique might be useful for various kinds of biological materials to be observed under FE-SEM.

  12. Radiation effects on microcrystalline cellulose in 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    Hao, Yan; Peng, Jing; Ao, Yinyong; Li, Jiuqiang; Zhai, Maolin

    2012-11-06

    The radiation processing of cellulose in ionic liquids (ILs) demands a comprehensive knowledge of radiation effects on cellulose in ILs. Herein, gamma radiation-induced degradation kinetics of microcrystalline cellulose (MCC) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was studied by viscometry. The intrinsic viscosity of MCC in [Bmim]Cl decreased slightly with increasing dose; while chemical structure and crystalline state of cellulose has no obvious change up to 300 kGy. The radiation degradation rate constant (k) of MCC in [Bmim]Cl was 2.60×10(-7)/kGy, lower than that of solid cellulose, but higher than that in N-methylmorpholine-N-oxide (NMMO) solvent. Furthermore, k value decreased to 1.12×10(-7)/kGy in dimethyl sulfoxide (DMSO)/[Bmim]Cl system due to the free radicals scavenging of DMSO. The radicals generated during irradiation play main role in the radiation degradation of MCC in [Bmim]Cl. This work provides a new way to control the average molecular weight of cellulose by radiation-induced degradation of cellulose in ILs.

  13. Synthesis, characterization, and application of 1-butyl-3-methylimidazolium thiocyanate for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Wasewar, Kailas L; Varma, Mahesh N; Shende, Diwakar Z

    2016-05-01

    1-Butyl-3-methylimidazolium thiocyanate [BMIM]SCN has been presented on extractive desulfurization of liquid fuel. The FTIR, (1)H-NMR, and C-NMR have been discussed for the molecular confirmation of synthesized [BMIM]SCN. Further, thermal, conductivity, moisture content, viscosity, and solubility analyses of [BMIM]SCN were carried out. The effects of time, temperature, sulfur compounds, ultrasonication, and recycling of [BMIM]SCN on removal of dibenzothiophene from liquid fuel were also investigated. In extractive desulfurization, removal of dibenzothiophene in n-dodecane was 86.5 % for mass ratio of 1:1 in 30 min at 30 °C under the mild process conditions. [BMIM]SCN could be reused five times without a significant decrease in activity. Also, in the desulfurization of real fuels, multistage extraction was examined. The data and results provided in the present paper explore the significant insights of imidazolium-based ionic liquids as novel extractant for extractive desulfurization of liquid fuels.

  14. Electrical conductivity and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

    NASA Astrophysics Data System (ADS)

    Sangoro, J.; Iacob, C.; Serghei, A.; Naumov, S.; Galvosas, P.; Kärger, J.; Wespe, C.; Bordusa, F.; Stoppa, A.; Hunger, J.; Buchner, R.; Kremer, F.

    2008-06-01

    Broadband dielectric and terahertz spectroscopy (10-2-10+12 Hz) are combined with pulsed field gradient nuclear magnetic resonance (PFG-NMR) to explore charge transport and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. The dielectric spectra are interpreted as superposition of high-frequency relaxation processes associated with dipolar librations and a conductivity contribution. The latter originates from hopping of charge carriers on a random spatially varying potential landscape and quantitatively fits the observed frequency and temperature dependence of the spectra. A further analysis delivers the hopping rate and enables one to deduce-using the Einstein-Smoluchowski equation-the translational diffusion coefficient of the charge carriers in quantitative agreement with PFG-NMR measurements. By that, the mobility is determined and separated from the charge carrier density; for the former, a Vogel-Fulcher-Tammann and for the latter, an Arrhenius temperature dependence is obtained. There is no indication of a mode arising from the reorientation of stable ion pairs.

  15. Surfactant-free microemulsions of 1-butyl-3-methylimidazolium hexafluorophosphate, propylamine nitrate, and water.

    PubMed

    Xu, Jie; Deng, Huanhuan; Fu, Yunlei; Chen, Yuquan; Zhang, Jing; Hou, Wanguo

    2017-03-08

    Generally, surfactants (or amphiphiles) are believed to be necessary components of microemulsions. However, it has been demonstrated that, in the absence of traditional surfactants, microemulsions can also form from a ternary system of two immiscible fluids (i.e., oil and water phases) and an amphi-solvent, but the current understanding of such surfactant-free microemulsions (SFMEs) is very limited. Herein, we report an SFME consisting of the hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), the protic IL propylamine nitrate (PAN), and water, in which bmimPF6 and PAN are used as the oil phase and the amphi-solvent, respectively. The microstructures and structural transitions of the SFME were investigated using cyclic voltammetry, fluorescence spectroscopy, and ultraviolet-visible spectroscopy. The SFME exhibited water-in-bmimPF6 (W/IL), bicontinuous (BC), and bmimPF6-in-water (IL/W) microstructures, depending on the composition of the ternary system, similar to the case of traditional surfactant-based microemulsions (SBMEs). The three kinds of microstructures were confirmed by cryogenic transmission electron microscopy (cryo-TEM) observations. To the best of our knowledge, this is the first report on SFMEs composed of two ILs as components, especially where one is used as the amphi-solvent.

  16. Highly ordered cellulose II crystalline regenerated from cellulose hydrolyzed by 1-butyl-3-methylimidazolium chloride.

    PubMed

    Ahn, Yongjun; Song, Younghan; Kwak, Seung-Yeop; Kim, Hyungsup

    2016-02-10

    This research focused on the preparation of highly ordered cellulose II crystalline by cellulose hydrolysis in ionic liquid, and the influence of molecular mobility on recrystallization of cellulose. The molar mass of cellulose was controlled by hydrolysis using 1-butyl-3-methylimidazolium chloride (BmimCl). The molecular mobility of cellulose dissolved in BmimCl was characterized by rheological properties. After characterization of cellulose solution and regeneration, change of molar mass and conversion to crystalline were monitored using gel-permeation chromatography and powder X-ray diffraction, respectively. The molar mass of the cellulose in BmimCl was remarkably decreased with an increase in duration time, resulting in better mobility and a lower conformational constraint below critical molar mass. The decrease in molar mass surprisingly increased the crystallinity up to ∼ 85%, suggesting a recrystallization rate dependence of the mobility. The correlation between the mobility and recrystallization rate represented quit different behavior above and below a critical molar mass, which strongly demonstrated to the effect of mobility on the conversion of amorphous state to crystalline structure.

  17. Understanding the dissolution of cellulose in 1-butyl-3-methylimidazolium acetate+DMAc solvent.

    PubMed

    Xu, Airong; Guo, Xin; Xu, Rui

    2015-11-01

    Cellulose solvent ([C4mim][CH3COO]/DMAc) could be obtained by adding N,N-dimethylacetamide (DMAc) in 1-butyl-3-methylimidazolium acetate ([C4mim][CH3COO]). The solubilities of cellulose in [C4mim][CH3COO]/DMAc solvents were determined at 25°C. The effects of molar ratio of DMAc to [C4mim][CH3COO] on cellulose solubility and the possible dissolution mechanism of cellulose in [C4mim][CH3COO]/DMAc solvent have been studied. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). It was found that, cellulose was more readily dissolved in [C4mim][CH3COO]/DMAc solvent than in a neat [C4mim][CH3COO], which mainly attributed to the increased "free" [CH3COO](-) anions and [C4mim](+) cations which result from the dissociation of [C4mim][CH3COO] by DMAc. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent displayed good thermostability and similar molecular structure to the original cellulose.

  18. Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

    SciTech Connect

    Baker, Gary A; Heller, William T

    2009-01-01

    As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

  19. Multiprobe Spectroscopic Inverstigation of Molecular-level Behavior within Aqueous 1-Butyl-3-methylimidazolium Tetrafluoroborate

    SciTech Connect

    Sarkar, Abhra; Ali, Maroof; Baker, Gary A; Tetin, Sergey Y.; Ruan, Qiaoqiao; Pandey, Siddharth

    2009-01-01

    In this work, an array of molecular-level solvent featuressincluding solute-solvent/solvent-solvent interactions, dipolarity, heterogeneity, dynamics, probe accessibility, and diffusionswere investigated across the entire composition of ambient mixtures containing the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4], and pH 7.0 phosphate buffer, based on results assembled for nine different molecular probes utilized in a range of spectroscopic modes. These studies uncovered interesting and unusual solvatochromic probe behavior within this benchmark mixture. Solvatochromic absorbance probessa watersoluble betaine dye (betaine dye 33), N,N-diethyl-4-nitroaniline, and 4-nitroanilineswere employed to determine ET (a blend of dipolarity/polarizability and hydrogen bond donor contributions) and the Kamlet-Taft indices * (dipolarity/polarizability), R (hydrogen bond donor acidity), and (hydrogen bond acceptor basicity) characterizing the [bmim][BF4] + phosphate buffer system. These parameters each showed a marked deviation from ideality, suggesting selective solvation of the individual probe solutes by [bmim][BF4]. Similar conclusions were derived from the responses of the fluorescent polarity-sensitive probes pyrene and pyrene-1-carboxaldehyde. Importantly, the fluorescent microfluidity probe 1,3-bis(1-pyrenyl)propane senses a microviscosity within the mixture that significantly exceeds expectations derived from simple interpolation of the behavior in the neat solvents. On the basis of results from this probe, a correlation between microviscosity and bulk viscosity was established; pronounced solvent-solvent hydrogen-bonding interactions were implicit in this behavior. The greatest deviation from ideal additive behavior for the probes studied herein was consistently observed to occur in the buffer-rich regime. Nitromethane-based fluorescence quenching of pyrene within the [bmim][BF4] + phosphate buffer system showed unusual compliance with a sphere

  20. Synthesis and thermodynamic properties of a new task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Dan; Han, Chun; Fan, Hong-Tao

    2015-07-01

    Task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate ([BMI]Sal) was synthesized in two steps. In the temperature range of 298.15-353.15 K, the density and surface tension for pure ionic liquid were determined and the thermodynamic properties of the ionic liquid were discussed in terms of Glasser's theory. The standard molar entropy and lattice energy for [BMI]Sal have been estimated. In addition, the thermal expansion coefficient, α = 5.53 × 10-4 K-1, calculated by the interstice model is in extreme agreement with α (experimental) = 5.50 × 10-4 K-1.

  1. Glycine in 1-butyl-3-methylimidazolium acetate and trifluoroacetate ionic liquids: effect of fluorination and hydrogen bonding.

    PubMed

    Podgoršek, Ajda; Macchiagodena, Marina; Ramondo, Fabio; Costa Gomes, Margarida F; Pádua, Agílio A H

    2012-05-14

    The solvation of glycine in two ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate, [C(1)C(4)Im][OAc], and 1-butyl-3-methylimidazolium trifluoroacetate, [C(1)C(4)Im][TFA], was studied by a combination of experimental and theoretical methods. The solubility of glycine in both ILs was determined at 333.15 K to be (8.1±0.5) and (1.0±0.5) wt % in [C(1)C(4)Im][OAc] and [C(1)C(4)Im][TFA], respectively. By IR spectroscopy it was found that, when dissolved in the ILs, glycine was mainly present in its zwitterionic form. Structural and energetic aspects of the solvation of glycine in the ILs and in mixtures of ILs and water were investigated by ab initio calculations and molecular dynamic simulations. It was observed that the firstly solvation shell around glycine consisted predominantly of acetate or trifluoroacetate anions, which formed hydrogen bonds either with the carboxylic group of neutral glycine or with the protonated ammonium group of the zwitterionic form. When water is present in the solutions, hydrogen bonds between water and the anion prevail. The overall energy of the system was decomposed into its components between pairs of species. It was established that the dominant contribution to the interaction energy between glycine and the IL was due to hydrogen bonds with the anions and the statistics of hydrogen bonds were analysed.

  2. The gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide from combustion calorimetry, vapor pressure measurements, and ab initio calculations.

    PubMed

    Emel'yanenko, Vladimir N; Verevkin, Sergey P; Heintz, Andreas

    2007-04-04

    Ionic liquids are attracting growing interest as alternatives to conventional molecular solvents. Experimental values of vapor pressure, enthalpy of vaporization, and enthalpy of formation of ionic liquids are the key thermodynamic quantities, which are required for the validation and development of the molecular modeling and ab initio methods toward this new class of solvents. In this work, the molar enthalpy of formation of the liquid 1-butyl-3-methylimidazolium dicyanamide, 206.2 +/- 2.5 kJ.mol-1, was measured by means of combustion calorimetry. The molar enthalpy of vaporization of 1-butyl-3-methylimidazolium dicyanamide, 157.2 +/- 1.1 kJ.mol-1, was obtained from the temperature dependence of the vapor pressure measured using the transpiration method. The latter method has been checked with measurements of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, where data are available from the effusion technique. The first experimental determination of the gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide, 363.4 +/- 2.7 kJ.mol-1, from thermochemical measurements (combustion and transpiration) is presented. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for 1-butyl-3-methylimidazolium dicyanamide using the G3MP2 theory. Excellent agreement with experimental results has been observed. The method developed opens a new way to obtain thermodynamic properties of ionic liquids which have not been available so far.

  3. Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

    SciTech Connect

    Fei, Beatrice Wong Chui; Hanifah, Sharina Abu; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2015-09-25

    Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10{sup −4} S cm{sup −1} at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

  4. Anomalous Freezing of Nano-Confined Water in Room-Temperature Ionic Liquid 1-Butyl-3-Methylimidazolium Nitrate.

    PubMed

    Abe, Hiroshi; Takekiyo, Takahiro; Yoshimura, Yukihiro; Saihara, Koji; Shimizu, Akio

    2016-04-18

    Non-crystal formation of ice is investigated by simultaneous X-ray diffraction and differential scanning calorimetry measurements upon cooling to -100 °C. At room temperature, size-tunable water confinement (≈20 Å size) in a room-temperature ionic liquid (RTIL, 1-butyl-3-methylimidazolium nitrate, [C4 mim][NO3 ]) exists in a water-rich region (70-90 mol % D2 O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C4 mim][NO3 ]-x mol % D2 O (70

  5. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    SciTech Connect

    Hashim, Muzna; Sun, Qining; Tao, Jingming; Wells, Jr., Tyrone; Shah, Aamer; Labbe, Nicole; Ragauskas, Arthur

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% from the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.

  6. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    DOE PAGES

    Hashim, Muzna; Univ. of Tennessee, Knoxville, TN; Sun, Qining; ...

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% frommore » the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.« less

  7. Photoisomerization of cyanine derivatives in 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol: Influence of specific interactions

    SciTech Connect

    Mali, K. S.; Dutt, G. B.; Mukherjee, T.

    2008-03-28

    Photoisomerization of two cyanine derivatives, 3,3{sup '}-diethyloxadicarbocyanine iodide (DODCI) and merocyanine 540 (MC 540), has been investigated in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol (93 wt % glycerol +7 wt % water) by measuring fluorescence lifetimes and quantum yields. The aim of this work is to understand how the rates of photoisomerization of DODCI and MC 540 are influenced by specific solute-solvent interactions besides the viscosity of the medium. For DODCI, it has been observed that the nonradiative rate constants, which represent the rates of photoisomerization, are almost identical in the ionic liquid and aqueous glycerol at given temperature, indicating that viscosity is the sole parameter that governs the rate of photoisomerization. In contrast, the photoisomerization rate constants of MC 540 have been found to be a factor of 2 higher in aqueous glycerol compared to the ionic liquid. The observed behavior is due to the zwitterionic character of MC 540, a consequence of which, the twisted state gets stabilized by the solute-solvent hydrogen bonding interactions in aqueous glycerol, thus lowering the barrier for isomerization.

  8. The genotoxic and cytotoxic effects of 1-butyl-3-methylimidazolium chloride in soil on Vicia faba seedlings.

    PubMed

    Liu, Tong; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Xie, Hui

    2015-03-21

    Although considered as "green" solvents, the toxic effects of ionic liquids (ILs) on organisms have been widely investigated in recent years. However, studies on the toxic effects of ILs on plants all focus on toxicity in nutrient solution. In the present paper, the toxic effects of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) on Vicia faba seedlings in soil at 0, 500, 1500, and 2500 mg kg(-1) on day 10 were studied. The present results showed that the growth of V. faba seedlings may be seriously inhibited when the IL concentrations were higher than 500 mg kg(-1). The EC50 values for shoot length, root length, and dry weight were 3886, 2483, and 3359 mg kg(-1), respectively. In addition, [C4mim]Cl caused lipid peroxidation and DNA damage at 500 mg kg(-1) and oxidative stress at 1500 mg kg(-1), which indicated that [C4mim]Cl may have genotoxicity and cytotoxicity on V. faba seedlings. Moreover, oxidative damage may be the main toxic mechanism of ILs.

  9. Synthesis, characterization and application of 1-butyl-3 methylimidazolium chloride as green material for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Varma, Mahesh N; Shende, Diwakar Z; Yoo, Chang Kyoo; Wasewar, Kailas L

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, (1)H-NMR, and (13)C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency.

  10. Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel

    PubMed Central

    Dharaskar, Swapnil A.; Varma, Mahesh N.; Shende, Diwakar Z.; Yoo, Chang Kyoo; Wasewar, Kailas L.

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  11. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    NASA Astrophysics Data System (ADS)

    Lísal, Martin; Izák, Pavel

    2013-07-01

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m2 at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  12. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface.

    PubMed

    Lísal, Martin; Izák, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m(2) at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  13. Influence of the current density on the electrochemical treatment of concentrated 1-butyl-3-methylimidazolium chloride solutions on diamond electrodes.

    PubMed

    Marcionilio, Suzana M L de Oliveira; Alves, Gisele M; E Silva, Rachel B Góes; Marques, Pablo J Lima; Maia, Poliana D; Neto, Brenno A D; Linares, José J

    2016-10-01

    This paper focuses on the influence of the current density treatment of a concentrated 1-butyl-3-methylimidazolium chloride (BMImCl) solution on an electrochemical reactor with a boron-doped diamond (BDD) anode. The decrease in the total organic carbon (TOC) and the BMImCl concentration demonstrate the capability of BDD in oxidizing ionic liquids (ILs) and further mineralizing (to CO2 and NO3 (-)) more rapidly at higher current densities in spite of the reduced current efficiency of the process. Moreover, the presence of Cl(-) led to the formation of oxychlorinated anions (mostly ClO3 (-) and ClO4 (-)) and, in combination with the ammonia generated in the cathode from the nitrate reduction, chloramines, more intensely at higher current density. Finally, the analysis of the intermediates formed revealed no apparent influence of the current density on the BMImCl degradation mechanism. The current density presents therefore a complex influence on the IL treatment process that is discussed throughout this paper.

  14. Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Zhang, Jin; Xu, Hongyan; Zhao, Xueyan; Zheng, Liqiang; Li, Xinwei; Yu, Li

    2006-07-17

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.

  15. Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

    NASA Astrophysics Data System (ADS)

    Li, Junchun; Zhang, Jianling; Han, Buxing; Wang, Yong; Gao, Liang

    2004-10-01

    We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.

  16. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    SciTech Connect

    Lisal, Martin; Izak, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  17. Hydrogen bonding behaviors of binary systems containing the ionic liquid 1-butyl-3-methylimidazolium trifluoroacetate and water/methanol.

    PubMed

    Zhang, Qing-Guo; Wang, Nan-Nan; Wang, Shuang-Long; Yu, Zhi-Wu

    2011-09-29

    The hydrogen-bonding properties of binary systems consisting of a representative Brønsted acidic hydrophilic ionic liquid (IL) 1-butyl-3-methylimidazolium trifluoroacetate ([Bmim][CF(3)CO(2)]) and a cosolvent, water or methanol, over the entire concentration range have been investigated by methods of attenuated total reflectance infrared spectroscopy, (1)H NMR spectroscopy, and quantum chemical calculations. It has been found that the hydrogen-bonding interactions between the anion [CF(3)CO(2)](-), rather than the cation, and the cosolvent molecules are dominant at low concentration of cosolvent. The H-bond interaction site between the IL anion and water/methanol is the O atom in the -COO group, while the -CF(3) group makes a positive contribution by donating electron to the carboxylic group, forming a cooperative hydrogen-bonding system. For the cation [Bmim](+), although the C2-H is the favorable proton donor in H-bonding interactions, the water/methanol molecules form H-bonds with the alkyl C-H at low water/methanol concentration due to the stronger interaction between C2-H and [CF(3)CO(2)](-). Interestingly, we found that the interaction between methanol and the IL is stronger than that between water and the IL because the methyl group in methanol has a positive contribution to the formation of H-bonds. The following sequential order of interaction strength is established: [Bmim](+)-methanol-[CF(3)CO(2)](-) > [Bmim](+)-water-[CF(3)CO(2)](-) > [Bmim](+)-[CF(3)CO(2)](-) > [CF(3)CO(2)](-)-methanol > [CF(3)CO(2)] (-)-water > [Bmim](+)-methanol > [Bmim] (+)-water.

  18. The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Zhao, Xueyan; Zhang, Jin; Cao, Quan; Zhao, Mingwei; Li, Zhen; Zhang, Gaoyong

    2007-01-01

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.

  19. Role of solubilized water in the reverse ionic liquid microemulsion of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Bai, Xiangtao; Yu, Li; Zhao, Xueyan; Zhang, Jin; Zhao, Mingwei; Li, Zhen

    2007-03-15

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) can form nonaqueous microemulsions with benzene by the aid of nonionic surfactant TX-100. The effect of water on ionic liquid-in-oil (IL/O) microemulsions was studied, and it was shown that the addition of small amount of water to the IL microemulsion contributed to the stability of microemulsion and thus increased the amount of solubilized bmimBF4 in the microemulsion. The conductivity measurements also showed that the attractive interactions between IL microdroplets were weakened, that is, the IL/O microemulsion becomes more stable in the present of some water. Fourier transform IR was carried out to analyze the states of the added water, and the result showed that these water molecules mainly behaved as bound water and trapped water, indicating that the water molecules are located in the palisade layers of the IL/O microemulsion. Furthermore, 1H NMR and 19F NMR spectra suggested that the added water molecules built the hydrogen binding network of imidazolium cations and H2O, BF4- anion and H2O, and at the same time the electronegative oxygen atoms of the oxyethylene units of TX-100 and water in the palisade layers, which made the palisade layers more firm and thus increased the stability of the microemulsion. The study can help in further understanding the formation mechanism of microemulsions. In addition, the characteristic solubilization behavior of the added water can provide an aqueous interface film for hydrolysis reactions and therefore may be used as an ideal medium to prepare porous or hollow nanomaterials.

  20. New solvents designed on the basis of the molecular-microscopic properties of binary mixtures of the type (protic molecular solvent + 1-butyl-3-methylimidazolium-based ionic liquid).

    PubMed

    Fortunato, Graciela G; Mancini, Pedro M; Bravo, M Virginia; Adam, Claudia G

    2010-09-16

    The main purpose of this work is to analyze the microscopic feature of solvent systems resulting from the basis of binary mixtures formed by a protic molecular solvent (methanol, ethanol, propan-1-ol, propan-2-ol, and 2-ethoxyethanol) and a 1-butyl-3-methylimidazolium (bmim)-based ionic liquid (IL) cosolvent composed of different anions (tetrafluoroborate, hexafluorophosphate, chloride, and bromide). At the same time, a complementary aim is to evaluate the incidence of anion type on the solvation pattern. The empirical solvatochromic parameters E(T)(N), π*, β, and α were determined from the UV-vis solvatochromic shifts of adequate probes. The behavior of the solvent systems was analyzed according to their deviation from ideality. E(T)(N) polarity and π* dipolarity/polarizability exhibit positive deviation from ideal behavior in all binary mixtures at the explored compositions. Moreover, E(T)(N) and α parameters display synergetic effects in some binary mixtures composed of tetrafluoroborate and hexafluorophosphate anions. The influence of anion nature on the response patterns is clearly manifested in the basicity β and acidity α of the media. This is connected with the degree and type of interaction between the anions and the 1-butyl-3-methylimidazolium cation. The ion-pair character of the ionic liquids affects their interactions with a solute or a molecular solvent. The application of an appropriate preferential solvation model allowed us to obtain valuable information about solute-solvent and solvent-solvent interactions of the selected ionic liquid mixtures. It is possible to identify relevant mixtures paying particular attention to the most remarkable microscopic properties, the acidity and the basicity, in order to propose "new solvents". Thus, the solvating feature can be tailored selecting the molecular and/or the ionic component at a particular composition. A simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is

  1. Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium thiocyanate ionic liquid + organic solvent or water).

    PubMed

    Domańska, Urszula; Laskowska, M; Pobudkowska, Aneta

    2009-05-07

    (Solid + liquid) phase equilibria (SLE) for the binary systems, ionic liquid (IL) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN] with an alcohol (1-octanol, 1-nonanol, 1-decanol, 1-undecanol, or 1-dodecanol) or water, and (liquid + liquid) phase equilibria (LLE) for the binary systems of [BMIM][SCN] with an alkane (n-hexane, n-heptane, n-octane, n-nonane, or n-decane), benzene, an alkylbenzenes (toluene or ethylbenzene), tetrahydrofuran (THF), cycloalkanes (cyclohexane or cycloheptane), or ethers (di-n-propyl ether, di-n-butyl ether, di-n-pentyl ether, n-butylmethyl ether, tert-butylmethyl ether (MTBE), or tert-butylethyl ether (ETBE)) have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from 250 to 430 K. In the case of systems IL + alkane, cycloalkane, or ether, the mutual immiscibility with an upper critical solution temperature (UCST) was detected, and in the systems of IL + benzene, alkylbenzene, or THF, the mutual immiscibility with a lower critical solution temperature (LCST) was observed. UV-vis spectroscopy was used to determine the very small compositions of the IL in the n-hexane (about 2 x 10(-5) IL mole fraction), benzene (about 2 x 10(-3) IL mole fraction), cyclohexane (about 2 x 10(-5) IL mole fraction), and THF (about 1.2 x 10(-2) IL mole fraction). For the binary systems containing alcohol, it was noticed that with increasing chain length of an alcohol, the solubility decreases. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by the simultaneous TG/DTA experiments. Well-known UNIQUAC, Wilson, and NRTL equations have been used to correlate the experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + alkane

  2. Solvent and rotational relaxation of Coumarin-153 in a micellar solution of a room-temperature ionic liquid, 1-butyl-3-methylimidazolium octyl sulfate, in ethylammonium nitrate

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Ghatak, Chiranjib; Pramanik, Rajib; Sarkar, Souravi; Sarkar, Nilmoni

    2010-10-01

    We have investigated the micelle formation by room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium octyl sulfate (bmimOs) with another RTIL, ethyl ammonium nitrate (EAN). In addition, the effect of micelle formation on the solvation and rotational relaxation dynamics have been observed using steady-state and picoseconds time-resolved spectroscopy. Both the solvent and rotational relaxations of Coumarin-153 are retarded in the micelle compared to that of neat EAN. The increase in average solvation time on going from neat EAN to bmimOs-EAN micelle is very small compared to the increase in solvation time on going from pure water to water containing micelle.

  3. Experimental and theoretical investigation of multistage extraction of 1,3-propanediol using the extraction system phosphate/1-butyl-3-methylimidazolium trifluoromethanesulfonate/water.

    PubMed

    Müller, Anja; Lutze, Philip; Górak, Andrzej

    2013-01-01

    The separation of 1,3-propanediol from fermentation broth is a challenging and energy-demanding step using conventional unit operations. One alternative process is the use of an aqueous two-phase system incorporating ionic liquids to use synergy effects of both technologies. Within this manuscript, the technical feasibility of the extraction of 1,3-propanediol using the aqueous two-phase system phosphate (salt)/1-butyl-3-methylimidazolium trifluoromethanesulfonate (ionic liquid)/water in a continuously operated process in pilot-scale is presented. The extraction was performed in a multistage mixer-settler unit and successfully modeled with an equilibrium-stage model and correlations to describe the liquid-liquid equilibrium of the salt/ionic liquid/water two-phase system. The developed and validated model was used for a further investigation of the influence of different process parameters in the determined operating window. Theses parameters include the number of stages, the phase ratio, the pH, and the mass fraction of the involved components. The results prove that the phosphate and 1-butyl-3-methylimidazolium trifluoromethanesulfonate mass fraction, the phase ratio, and the number of stages have a considerable influence on the recovery of 1,3-propanediol, whereas the pH value has only a smaller impact. Those results can be used for optimization of the system as well as for targeting future research within this area.

  4. Synergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity

    PubMed Central

    2015-01-01

    An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities. PMID:25068078

  5. Interaction between amphiphilic ionic liquid 1-butyl-3-methylimidazolium octyl sulfate and anionic polymer of sodium polystyrene sulfonate in aqueous medium

    NASA Astrophysics Data System (ADS)

    Barhoumi, Z.; Saini, M.; Amdouni, N.; Pal, A.

    2016-09-01

    The micellization of an aqueous solution of the surface active ionic liquid (SAIL), 1-butyl-3-methylimidazolium octylsufate (C4mim)(C8OSO3) and its interaction with an anionic polymer sodium polystyrene sulfonate, (NaPSS) were studied using conductimetry, tensiometry and fluorimetry. Surface tension profile shows a more dramatic increase in the value of surface tension of aqueous (C4mim)(C8OSO3) before the critical micelle concentration (cmc) of IL. The critical micelle concentration (cmc) value of this surfactant was found out from conductance measurements. The thermodynamic parameters, i.e., Gibb's free energy, enthalpy, and entropy of micellization of the IL in aqueous solution have been calculated. Behavior of fluorescence probe confirms the binding interactions between SAIL and the polyelectrolyte.

  6. States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

    PubMed

    Li, Na; Cao, Quan; Gao, Yanan; Zhang, Jin; Zheng, Liqiang; Bai, Xiangtao; Dong, Bin; Li, Zhen; Zhao, Mingwei; Yu, Li

    2007-10-22

    We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions.

  7. Physical Properties of Ionic Liquids Consisting of the 1-Butyl-3-Methylimidazolium Cation with Various Anions and the Bis(trifluoromethylsulfonyl)imide Anion with Various Cations

    SciTech Connect

    Jin, Hui; O'Hare, Bernie; Dong, Jing; Arzhantsev, Sergei; Baker, Gary A; Wishart, James F.; Benesi, Alan; Maroncelli, Mark

    2008-01-01

    Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.

  8. Application of the Bahe's pseudolattice-theory to water-1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures at 298.15K Part I. Autoprotolysis constants.

    PubMed

    Bou Malham, I; Letellier, P; Turmine, M

    2007-04-15

    The autoprotolysis constants (K(s)) of water - 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures were determined at 298K over the composition range of 0 to 77.43vol.% bmimBF(4) using potentiometric method with a glass electrode. A slight increase in the autoprotolysis constant was observed when the salt was added to the water. The value of the ionic product of the medium then decreases as the bmimBF(4) content increases from about 20vol.%. The acid-base properties of these media were perfectly described by Bahe's approaches that were completed by Varela et al. concerning structured electrolyte solutions with large short-range interactions.

  9. Syntheses and crystal structures of two ionic liquids with halogen-bonding groups: 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates

    NASA Astrophysics Data System (ADS)

    Mukai, Tomohiro; Nishikawa, Keiko

    2010-05-01

    We have prepared and characterized two novel Lewis acidic ionic liquids, 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates, using differential scanning calorimetry and single-crystal X-ray analysis. The effect of the halogen species on the phase transition behaviour and the cation-anion interacting geometry was investigated. The minor difference in chemical structure strongly affects the melting point, glass transition temperature and crystal structure because of the different halogen-bonding strength and linearity between C-Br⋯O and C-I⋯O. Both the salts melt above room temperature, but the fused salts show glass-forming property and poor crystallizability.

  10. A novel, sensitive, reusable and low potential acetylcholinesterase biosensor for chlorpyrifos based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotubes gel.

    PubMed

    Zamfir, Lucian-Gabriel; Rotariu, Lucian; Bala, Camelia

    2011-04-15

    A novel, low potential and highly sensitive acetylcholinesterase (AChE) biosensor was developed based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotube composite gel thiocholine sensor. Composite gel promoted electron transfer reaction at a lower potential (+50 mV) and catalyzed electrochemical oxidation of thiocholine with high sensitivity. AChE was immobilized in sol-gel matrix that provides a good support for enzyme without any inhibition effect from the ionic liquid. The amount of immobilized enzyme and incubation time with chlorpyrifos were optimized. Chlorpyrifos could be determined in the range of 10(-8)-10(-6)M with a detection limit of 4 nM. Fast and efficient enzyme reactivation was obtained at low obidoxime concentration (0.1mM). Moreover, the biosensor exhibited a good stability and reproducibility and could be use for multiple determinations of pesticide with no loss of the enzyme activity.

  11. Vibrational sum-frequency generation spectroscopy of ionic liquid 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate at the air-water interface

    NASA Astrophysics Data System (ADS)

    Saha, Ankur; SenGupta, Sumana; Kumar, Awadhesh; Choudhury, Sipra; Naik, Prakash D.

    2016-08-01

    The structure and orientation of room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate [PF3(C2F5)3], commonly known as [bmim][fap], have been investigated at the air-[bmim][fap] and air-water interfaces, employing vibrational sum-frequency generation (VSFG) spectroscopy. The VSFG spectra in the CH stretch region suggest presence of the [bmim] cation at the interfaces. Studies reveal that the butyl chain protrudes out into air, and the imidazolium ring lies almost planar to the interface. The CH stretch intensities get enhanced at the air-water interface, mainly because of polar orientation of imidazolium cation induced by interfacial water molecules. The OH stretch intensities are also enhanced at the air-water interface due to polar orientation of interfacial water molecules induced by [bmim][fap]. The Brewster angle microscopy suggests self aggregation of [bmim][fap] in the presence of water, and the aggregation becomes extensive showing dense surface domains with time. However, the surface pressure is almost unaffected due to aggregation.

  12. How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

    PubMed

    Lépori, Cristian M O; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2016-01-21

    The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

  13. 1-Butyl-3-Methylimidazolium Tetrafluoroborate Film as a Highly Selective Sensing Material for Non-Invasive Detection of Acetone Using a Quartz Crystal Microbalance

    PubMed Central

    Tao, Wenyan; Lin, Peng; Liu, Sili; Xie, Qingji; Ke, Shanming; Zeng, Xierong

    2017-01-01

    Breath acetone serves as a biomarker for diabetes. This article reports 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), a type of room temperature ionic liquid (RTIL), as a selective sensing material for acetone. The RTIL sensing layer was coated on a quartz crystal microbalance (QCM) for detection. The sensing mechanism is based on a decrease in viscosity and density of the [bmim][BF4] film due to the solubilization of acetone leading to a positive frequency shift in the QCM. Acetone was detected with a linear range from 7.05 to 750 ppmv. Sensitivity and limit of detection were found to be 3.49 Hz/ppmv and 5.0 ppmv, respectively. The [bmim][BF4]-modified QCM sensor demonstrated anti-interference ability to commonly found volatile organic compounds in breath, e.g., isoprene, 1,2-pentadiene, d-limonene, and dl-limonene. This technology is useful for applications in non-invasive early diabetic diagnosis. PMID:28117697

  14. Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water.

    PubMed

    Gao, Yanan; Hilfert, Liane; Voigt, Andreas; Sundmacher, Kai

    2008-03-27

    In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.

  15. Physicochemical properties, structure, and conformations of 1-Butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim]NTf2 ionic liquid.

    PubMed

    Blokhin, Andrey V; Paulechka, Yauheni U; Strechan, Aliaksei A; Kabo, Gennady J

    2008-04-10

    Thermodynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim]NTf2) ionic liquid have been studied by adiabatic calorimetry in the temperature range of 5 to 370 K. This compound has been found to form crystal, liquid, and glass. The temperature and enthalpy of fusion for [C(4)mim]NTf(2) have been determined to be T(fus) = 270.22 +/- 0.02 K and Delta(fus)H = 23.78 +/- 0.04 kJ.mol(-1), respectively. The heat capacity of crystalline [C(4)mim]NTf(2) in the T range of 205 to 255 K may vary by a few percent, subject to the procedure of the crystal preparation. The glass transition temperature for [C(4)mim]NTf(2) has been found to be T(g) = 181.5 +/- 0.1 K. On the basis of the results of DFT quantum chemical calculations, the experimental vibrational spectra, and the available literature data, thermodynamic properties of [C(4)mim]NTf(2) in the ideal-gas state have been calculated by the statistical thermodynamic methods. The entropy values for the gaseous compound obtained from the experimental data and the calculations are in satisfactory agreement.

  16. Simultaneous separation of basic and acidic proteins using 1-butyl-3-methylimidazolium-based ion liquid as dynamic coating and background electrolyte in capillary electrophoresis.

    PubMed

    Wu, Xiaoping; Wei, Weiping; Su, Qingmei; Xu, Liangjun; Chen, Guonan

    2008-06-01

    1-Butyl-3-methylimidazolium tetrafluoroborate ionic liquids (1B-3MI-TFB ILs) were employed as a coating material and BGE in CE for simultaneous separation of basic and acidic proteins such as lysozyme, cytochrome C, ribonuclease A, albumin, and alpha-lactalbumin. 1B-3MI-TFB ILs effectively reversed the surface charges on the capillary inner surface, preventing the adsorption of positively charged proteins onto the silica surface, as well as associated with proteins, thus benefiting the separation efficiencies and reproducibility. Consequently, simultaneous baseline separation of five proteins was achieved within 14 min by using 10 mM of 1B-3MI-TFB ILs as dynamic coating and the only running electrolyte at the voltage of +20 kV. The proposed coating technique is simple, less time-consuming, reproducible, and also stable enough for proteins separation without the need of additives. Symmetrical peaks with efficiencies up to 670,000 plates/m were obtained. Recoveries of proteins with RSD (for migration times) of 0.23-0.42% (run-to-run) and 2.5-3.8% (day-to-day) were achieved, respectively. The applicability of the proposed method in proteins separation was evaluated by the separation of egg white samples.

  17. Hydrolysis of insoluble cellulose to glucose catalyzed by cellulase-containing liposomes in an aqueous solution of 1-butyl-3-methylimidazolium chloride.

    PubMed

    Yoshimoto, Makoto; Tanimura, Kazuhiko; Tokunaga, Kazuki; Kamimura, Akio

    2013-01-01

    The liposome containing cellulase from Trichoderma viride was prepared under the condition that an appreciable amount of cellulase was incorporated in lipid membranes. The liposomal cellulase and free enzyme were examined in their hydrolytic activities to insoluble cellulose powder CC31 in the acetate buffer solution (pH 4.8) of 15 w/w% [Bmim][Cl] (1-butyl-3-methylimidazolium chloride). The mean diameter and size distribution of cellulase-containing liposome were practically unchanged under the above condition. The free cellulase was deactivated more rapidly than the liposomal cellulase in catalyzing the hydrolysis of 2.0 g/l CC31 at 45°C in the presence of [Bmim][Cl] for 48 h. The activities of liposomal and free cellulase to cellobiose as soluble substrate were less susceptible to [Bmim][Cl] than their cellulolytic activities to CC31, meaning that β-glucosidase is relatively stable among the three enzyme components of cellulase. The rate of glucose production could be appreciably improved by the pretreatment of CC31 with [Bmim][Cl] alone at 120°C for 30 min followed by the liposomal cellulase-catalyzed hydrolysis of the substrate at 45°C at the [Bmim][Cl] concentration of 15 w/w%.

  18. Mechanical exfoliation of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) providing graphene nanoplatelets that exhibit enhanced electrocatalysis

    NASA Astrophysics Data System (ADS)

    Hayes, William Ignatius; Lubarsky, Gennady; Li, Meixian; Papakonstantinou, Pagona

    2014-12-01

    A novel production method for graphene nanoplatelets (GPs) with enhanced electrocatalytic behaviour is presented. GPs show improvement in their oxygen reduction reaction (ORR) catalysis after prolonging the grinding of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6). Nitrogen doping of the GPs has inferred a further increase in ORR. The ORR onset potential, cathodic current magnitude and electron transfer efficiency have all improved as a direct consequence of increasing the graphite grinding duration from 30 min to 4 h. Atomic force microscopy has confirmed a decrease in the GP diameter and height as the grinding increases. Raman spectroscopy indicates a higher level of defects present after prolonging the graphite grinding in BMIM-PF6, most likely a result of the increased edge plane exposure. This increased edge plane appears to promote a higher level of nitrogen incorporation as the graphite grinding duration increases, as confirmed by X-ray photoelectron spectroscopy analysis. The stability of the cathodic current assessed by chronoamperometry analysis is higher for the GP and nitrogen doped graphene nanoplatelet (N-GP) samples than the platinum on carbon black (Pt/C). This study presents a novel process for the production of nitrogen doped graphene nanoplatelets, constituting a strategy for the up-scaled production of electrocatalysts.

  19. Amplified electrochemical sensor employing CuO/SWCNTs and 1-butyl-3-methylimidazolium hexafluorophosphate for selective analysis of sulfisoxazole in the presence of folic acid.

    PubMed

    Karimi-Maleh, Hassan; Amini, Fatemeh; Akbari, Ahmad; Shojaei, Moein

    2017-06-01

    In the present work, CuO nanoparticle decorated on single wall carbon nanotubes (CuO/SWCNTs) nanocomposite was successfully synthesized by chemical precipitation method and used for modification of carbon paste electrode (CPE) in the presence of 1-butyl-3-methylimidazolium hexafluorophosphate (1-B-3-MIHFP) liquid as binder. The novel voltammetric sensor was used as first electrochemical sensor for determination of sulfisoxazole (SFX). CuO/SWCNTs nanocomposite characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD) methods. Voltammetric methods such as cyclic voltammetry, square wave voltammetry (SWV), electrochemical impedance spectroscopy (EIS) and chronoamperometry were performed to assess the electrochemical performance of CuO/SWCNTs/1-B-3-MIHFP/CPE towards SFX in aqueous solution. The voltammetric obtained data confirm the significant enhancement of oxidation current and reduction overvoltage for electro-oxidation of SFX at a surface of CuO/SWCNTs/1-B-3-MIHFP/CPE. The square wave voltammetric response shows the linear increment of oxidation signals with an increase in the concentration of SFX in the range of 0.08-650μM with limit of detection 0.04μM. Using CuO/SWCNTs/1-B-3-MIHFP/CPE the SFX and folic acid peaks are separated ca. 0.72 and 0.895V, respectively; hence SFX can be detected in the presence of folic acid. Finally, the CuO/SWCNTs/1-B-3-MIHFP/CPE was used as high sensitive tools for analysis of SFX and folic acid in real samples.

  20. Conductivity and spectroscopic investigation of bis(trifluoromethanesulfonyl)imide solution in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide.

    PubMed

    Yu, Lei; Pizio, Benjamin S; Vaden, Timothy D

    2012-06-07

    Protic ionic liquids (PILs) are promising alternatives to water for swelling Nafion as a fuel cell proton exchange membrane (PEM). PILs can significantly improve the high-temperature performance of a PEM. The proton dissociation and solvation mechanisms in a PIL, which are keys to understanding the proton transportation and conductivity, have not been fully explored. In this paper, we used FTIR, Raman, and electronic spectroscopy with computational simulation techniques to explore the spectroscopic properties of bis(trifluoromethanesulfonyl)imide (HTFSI) solutions in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI) ionic liquid at concentrations from ∼0.1 to as high as ∼1.0 M. Solution conductivities were measured at room temperature and elevated temperatures up to ∼65 °C. The solution structure and properties depend on the concentration of HTFSI. At lower concentration, around 0.1 M, the HTFSI solution has higher conductivity than pure BMITFSI. However, the conductivity decreases when the concentration increases from 0.1 to 1.0 M. Temperature-dependent conductivities followed the Vogel-Fulcher-Tamman equation at all concentrations. Conductivity and spectroscopy results elucidate the complicated ionization and solvation mechanism of HTFSI in BMITFSI solutions. Raman spectroscopy and density functional theory (DFT) calculations are consistent with the complete ionization of HTFSI to generate solvated H(+) at low concentrations. FTIR, Raman, and electronic spectroscopic results as well as DFT computational simulation indicated that when the concentration is as high as 1.0 M, a significant amount of TFSI(-) is protonated, most likely at the imide nitrogen.

  1. Characterization of the influence of the ionic liquid 1-butyl-3-methylimidazolium chloride on the structure and thermal stability of green fluorescent protein.

    PubMed

    Heller, William T; O'Neill, Hugh M; Zhang, Qiu; Baker, Gary A

    2010-11-04

    Ionic liquids (ILs) are finding a vast array of applications as novel solvents for a wide variety of processes that include enzymatic chemistry, particularly as more biocompatible ILs are designed and discovered. While it is assumed that a native or near-native structure is required for enzymatic activity, there is some evidence that ILs alter protein structure and oligomerization states in a manner than can negatively impact function. The IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, is a well-studied, water-miscible member of the popular 1-alkyl-3-methylimidazolium IL family. To improve our understanding of the impact of water-miscible ILs on proteins, we have characterized the structure and oligomerization state of green fluorescent protein (GFP) in aqueous solutions containing 25 and 50 vol % [bmim]Cl using a combination of optical spectroscopy and small-angle neutron scattering (SANS). Measurements were also performed as a function of temperature to provide insight into the effect of the IL on the thermal stability of GFP. While GFP exists as a dimer in water, the presence of 25 vol % [bmim]Cl causes GFP to transition to a monomeric state. The SANS data indicate that GFP is a great deal less compact in 50 vol % [bmim]Cl than in neat water, indicative of unfolding from the native structure. The oligomerization state of the protein in IL-containing aqueous solution changes from a dimer to a monomer in response to the IL, but does not change as a function of temperature in the IL-containing solution. The SANS and spectroscopic results also demonstrate that the addition of [bmim]Cl to the solution decreases the thermal stability of GFP, allowing the protein to unfold at lower temperatures than in aqueous solution.

  2. Electrochemical and spectral properties of ferrocene (Fc) in ionic liquid: 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)]. Concentration effects.

    PubMed

    Vorotyntsev, Mikhail A; Zinovyeva, Veronika A; Konev, Dmitry V; Picquet, Michel; Gaillon, Laurent; Rizzi, Cecile

    2009-01-29

    Several earlier studies of the electrochemical oxidation of ferrocene (Fc) in room-temperature ionic liquids revealed an essentially nonlinear dependence of the oxidation current on the Fc concentration in its relatively dilute solutions, with its formally calculated diffusion coefficient strongly increasing with the concentration. Since no plausible mechanism leading to this very unusual finding had been proposed, our study of Fc solutions in 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)], was performed to verify whether the above observation originated from an incorrect determination of the dissolved Fc concentration. Our observations have demonstrated that reliable control of the Fc concentration in solution is complicated by factors such as the low amount of Fc used to prepare small-volume solutions or the great difficulty to dissolve completely a solid powder in a solvent with an extremely high viscosity. An unexpected additional complication is related to a sufficiently high volatility of Fc which manifests itself even at room temperature and especially at elevated temperatures or/and in the course of vacuum treatment of its solutions or its solid powder. Parallel measurements of electrochemical responses and UV-visible spectra for several series of Fc solutions of various concentrations (prepared with the use of different procedures) have shown a perfect parallelism between the peak current and the intensity of the absorption band in the range of 360-550 nm, leading us to the conclusion of a linear relationship between the oxidation current and the molecularly dissolved Fc concentration. The relations of these measured characteristics with the estimated Fc concentration in these solutions have demonstrated a much greater dispersion (attributed to the difficulty of a precise measurement of the latter) but without a significant deviation from the linearity in general. This finding has allowed us to estimate the diffusion coefficient of this species: D

  3. The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles.

    PubMed

    Ferreyra, Darío D; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2012-03-14

    The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N

  4. (BMI)3LnCl6 crystals as models for the coordination environment of LnCl3 (Ln = Sm, Eu, Dy, Er, Yb) in 1-butyl-3-methylimidazolium chloride ionic-liquid solution.

    PubMed

    Han, Yulun; Lin, Cuikun; Meng, Qingguo; Dai, Fengrong; Sykes, Andrew G; Berry, Mary T; May, P Stanley

    2014-06-02

    A series of (BMI)3LnCl6 (Ln = Sm, Eu, Dy, Er, Yb) crystals was prepared from solutions of LnCl3 dissolved in the ionic liquid, 1-butyl-3-methylimidazolium chloride (BMICl). Crystals with Ln = 5% Sm + 95% Gd and with Ln = 5% Dy + 95% Gd were also grown to assess the importance of cross-relaxation in the Sm and Dy samples. The crystals are isostructural, with monoclinic space group P21/c and four formula units per unit cell. The first coordination sphere of Ln(3+) consists of six Cl(-) anions forming a slightly distorted octahedral LnCl6(3-) center. The second coordination sphere is composed of nine BMI(+) cations. The emission spectra and luminescence lifetimes of both (BMI)3LnCl6 crystals and LnCl3 in BMICl solution were measured. The spectroscopic similarities suggest that crystalline (BMI)3LnCl6 provides a good model of the Ln(3+) coordination environment in BMICl solution.

  5. Dynamics of solvent and rotational relaxation of coumarin 153 in room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate confined in Brij-35 micelles: a picosecond time-resolved fluorescence spectroscopic study.

    PubMed

    Chakraborty, Anjan; Seth, Debabrata; Chakrabarty, Debdeep; Setua, Palash; Sarkar, Nilmoni

    2005-12-15

    The dynamics of solvent and rotational relaxation of Coumarin 153 (C-153) in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and in the ionic liquid confined in Brij-35 micellar aggregates have been investigated using steady-state and time-resolved fluorescence spectroscopy. We observed slower dynamics in the presence of micellar aggregates as compared to the pure IL. However, the slowing down in the solvation time on going from neat IL to IL-confined micelles is much smaller compared to that on going from water to water-confined micellar aggregates. The increase in solvation and rotational time in micelles is attributed to the increase in viscosity of the medium. The slow component is assumed to be dependent on the viscosity of the solution and involves large-scale rearrangement of the anions and cations while fast component is assumed to originate from the initial response of the anions during excitation. The slow component increases due to the increase in the viscosity of the medium and increase in fast component is probably due to the hydrogen bonding between the anions and polar headgroup of the surfactant. The dynamics of solvent relaxation was affected to a small extent due to the micelle formation.

  6. Electrochemical reduction of aromatic ketones in 1-butyl-3-methylimidazolium-based ionic liquids in the presence of carbon dioxide: the influence of the ketone substituent and the ionic liquid anion on bulk electrolysis product distribution.

    PubMed

    Zhao, Shu-Feng; Horne, Mike; Bond, Alan M; Zhang, Jie

    2015-07-15

    Electrochemical reduction of aromatic ketones, including acetophenone, benzophenone and 4-phenylbenzophenone, has been undertaken in 1-butyl-3-methylimidazolium-based ionic liquids containing tetrafluoroborate ([BF4](-)), trifluoromethanesulfonate ([TfO](-)) and tris(pentafluoroethyl)trifluorophosphate ([FAP](-)) anions in the presence of carbon dioxide in order to investigate the ketone substituent effect and the influence of the acidic proton on the imidazolium cation (C2-H) on bulk electrolysis product distribution. For acetophenone, the minor products were dimers (<10%) in all ionic liquids, which are the result of acetophenone radical anion coupling. For benzophenone and 4-phenylbenzophenone, no dimers were formed due to steric hindrance. In these cases, even though carboxylic acids were obtained, the main products generated were alcohols (>50%) derived from proton coupled electron transfer reactions involving the electrogenerated radical anions and C2-H. In the cases of both acetophenone and benzophenone, the product distribution is essentially independent of the ionic liquid anion. By contrast, 4-phenylbenzophenone shows a product distribution that is dependent on the ionic liquid anion. Higher yields of carboxylic acids (∼40%) are obtained with [TfO](-) and [FAP](-) anions because in these ionic liquids the C2-H is less acidic, making the formation of alcohol less favourable. In comparison with benzophenone, a higher yield of carboxylic acid (>30% versus ∼15%) was obtained with 4-phenylbenzophenone in all ionic liquids due to the weaker basicity of 4-phenylbenzophenone radical anion.

  7. Interaction of ionic liquid with water in ternary microemulsions (Triton X-100/water/1-butyl-3-methylimidazolium hexafluorophosphate) probed by solvent and rotational relaxation of coumarin 153 and coumarin 151.

    PubMed

    Seth, Debabrata; Chakraborty, Anjan; Setua, Palash; Sarkar, Nilmoni

    2006-08-29

    The interaction of ionic liquid with water in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/Triton X-100 (TX-100)/H2O ternary microemulsions, i.e., "[bmim][PF6]-in-water" microregions of the microemulsions, has been studied by the dynamics of solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 151 (C-151). The variation of the time constants of solvent relaxation of C-153 is very small with an increase in the [bmim][PF6]/TX-100 ratio (R). The rotational relaxation time of C-153 also remains unchanged in all micremulsions of different R values. The invariance of solvation and rotational relaxation times of C-153 indicates that the position of C-153 remains unaltered with an increase in R and probably the probe is located at the interfacial region of [bmim][PF6] and TX-100 in the microemulsions. On the other hand, in the case of C-151, with an increase in R the fast component of the solvation time gradually increases and the slow component gradually decreases, although the change in solvation time is small in comparison to that of microemulsions containing common polar solvents such as water, methanol, acetonitrile, etc. The rotational relaxation time of C-151 increases with an increase in R. This indicates that with an increase in the [bmim][PF6] content the number of C-151 molecules in the core of the microemulsions gradually increases. In general, the solvent relaxation time is retarded in this room temperature ionic liquid/water-containing microemulsion compared to that of a neat solvent, although retardation is very small compared to that of the solvent relaxation time of the conventional solvent in the core of the microemulsions.

  8. Solvent and rotational relaxation of coumarin-153 and coumarin-480 in ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) modified sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) micelle

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Sarkar, Nilmoni

    2013-02-01

    Understanding ion transport dynamics, structure of surfactant aggregates in ionic liquids or ionic liquid/water solutions are quite interesting and potentially important due to widespread applications of surfactant-based systems. In this manuscript we have investigated the effect of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) addition on solvent and rotational relaxation of coumarin-153 (C-153) and coumarin-480 (C-480) in aqueous solution of sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) using steady state and picosecond time resolved fluorescence spectroscopy. The strong adsorption of the bmim+ at the interface and the role of the ionic liquid particularly the cation bmim+ in the modification of the interfacial geometry were probed by the analysis of decay parameters and the rotational relaxation parameters. Since the addition of the NaAOT in water-bmimBF4 mixture above critical micellar concentration (48 mM, obtained from observing pyrene fluorescence) causes strong adsorption of the ionic liquid particularly the cation bmim+, the average solvation time, particularly the slow component increases significantly. More importantly we have found the probe dependent solvation dynamics due to the different location of the probe molecules, C-153 and C-480. C-153 being hydrophobic in nature resides in the stern layer and the adsorption of the bmim+ at the interface modifies stern layer more effectively. So we have observed more pronounced change in solvation dynamics in case of C-153 compared to that in case of C-480. The fluorescence anisotropy decays of the probe molecules were found to be biexponential in nature. The anisotropy decay was interpreted by using a model which consists of the wobbling (rotational) and translational diffusion of the dye coupled with the rotational motion of the micelle as a whole.

  9. Electrospray of 1-Butyl-3-Methylimidazolium Dicyanamide Under Variable Flow Rate Operations

    DTIC Science & Technology

    2014-06-27

    between the cone and jet structure known as the neck . The second zone occurs at the jet breakup region located at the jet tip. Along with small ions...Droplets Extractor Ion Emission Zones Neck Fig. 1 Taylor cone structure and ion emission zones of a capillary emitter. Table 1 Physical properties of...varies as a ring of the integrated current hemisphere. Each ring has the circumference at the given angle on the hemisphere and a width of 0.85 mm

  10. ALPHA-AMYLASE ACTIVITY IN VARIOUS CONCENTRATIONS OF THE IONIC LIQUID, 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch is an extremely abundant, economical and versatile industrial commodity. Many industrial uses of starch depend on hydrolyzing the polymer for the conversion of glucose and maltodextrins. Starch hydrolysis is frequently achieved by utilizing alpha-amylase, which is an endo-acting enzyme that...

  11. Dielectric relaxation and solvation dynamics in a prototypical ionic liquid + dipolar protic liquid mixture: 1-butyl-3-methylimidazolium tetrafluoroborate + water.

    PubMed

    Zhang, Xin-Xing; Liang, Min; Hunger, Johannes; Buchner, Richard; Maroncelli, Mark

    2013-12-12

    Dielectric and solvation data on mixtures of 1-butyl-3-methylimidazilium tetrafluoroborate ([Im41][BF4]) + water are reported and used to examine the utility of dielectric solvation models. Dielectric permittivity and loss spectra (25 °C) were recorded over the frequency range 200 MHz to 89 GHz at 17 compositions and fit to a 4-Debye form. Dynamic Stokes shift measurements on the solute coumarin 153 (C153), made by combining fluorescence upconversion (80 fs resolution) and time-correlated single photon counting data (20 ns range), were used to determine the solvation response at 7 compositions (20.5 °C). All properties measured here were found to depend upon mixture composition in a simple continuous manner, especially when viewed in terms of volume fraction. Solvation response functions predicted by a simple dielectric continuum model are similar to but ∼7-fold faster than the spectral response functions measured with C153. The solvation data are in better agreement with the recently published predictions of a semimolecular model of Biswas and co-workers [J. Phys. Chem. B 2011, 115, 4011], but these latter predictions are systematically slow by a factor of ∼3.

  12. Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose.

    PubMed

    Qi, Xinhua; Li, Luyang; Tan, Tengfei; Chen, Wenting; Smith, Richard L

    2013-03-19

    Functional carbonaceous material (FCM) loaded with carboxylic groups was prepared by hydrothermal carbonization of cellulose in the presence of acrylic acid. The resulting FCM was used as adsorbent for recovery of a water-soluble ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). The FCM consisted of microspheres (100-150 nm) and had a low surface area (ca. 20 m(2)/g), but exhibited adsorption capacity comparable to that of commercial activated carbon which can be attributed to the presence of high content of polar oxygenated groups (-OH, -C═O, -COOH) as revealed by spectral analyses. Sorption of [BMIM][Cl] onto FCM adsorbent could be well-described by pseudo-second-order kinetics. Thermodynamic and adsorption isothermal analyses revealed that the adsorption process was spontaneous, exothermic, and could be described by the Freundlich adsorption model. The FCM adsorbent could be regenerated effectively and recycled for at least three times without loss of adsorption capacity. The results of this work provide a facile method for production of functional carbonaceous materials from renewable resources that can be used for treatment of aqueous streams containing small concentrations of ionic liquid, [BMIM][Cl].

  13. CRYSTAL POLYMORPHISM IN 1-BUTYL-3-METHYLIMIDAZOLIUM HALIDES: SUPPORTING IONIC LIQUID FORMATION THROUGH INHIBITION OF CRYSTALLIZATION. (R828257)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  14. Ionic liquid 1-butyl-3-methylimidazolium cyanamide (bmim [dca]) as a solvent and catalyst for acylation of maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have found a novel method to prepare maltodextrin stearate with DS upto 0.60 in 90% yields from maltodextrin in IL bmim[dca] reacted with vinyl stearate or stearic acid. In this work we have demonstrated that IL could simultaneously act as a solvent and as a catalyst for reaction of maltodextrin...

  15. Degradation pathway and kinetics of 1-alkyl-3-methylimidazolium bromides oxidation in an ultrasonic nanoscale zero-valent iron/hydrogen peroxide system.

    PubMed

    Zhou, Haimei; Shen, Yuanyuan; Lv, Ping; Wang, Jianji; Li, Pu

    2015-03-02

    Fenton and Fenton-like oxidation has been already demonstrated to be efficient for the degradation of imidazolium ionic liquids (ILs), but little is known for their degradation pathway and kinetics in such systems. In this work, degradation pathway and kinetics of 1-alkyl-3-methylimidazolium bromides ([Cnmim]Br, n=2, 4, 6, 8, and 10) were investigated in an ultrasound nanoscale zero-valent iron/hydrogen peroxide (US-nZVI/H2O2) system. For this purpose, 1-butyl-3-methylimidazolium bromide ([C4mim]Br) was used as a representative ionic liquid to optimize pH value, nZVI dose, and H2O2 concentration for the degradation reaction. Then, the degradation kinetics of [Cnmim]Br was investigated under optimal conditions, and their degradation intermediates were monitored by gas chromatography-mass spectrometry (GC-MS). It was shown that the degradation of [Cnmim]Br in such a heterogeneous Fenton-like system could be described by a second order kinetic model, and a number of intermediate products were detected. Based on these intermediate products, detailed pathways were proposed for the degradation of [Cnmim]Br in the ultrasound-assisted nZVI/H2O2 system. These findings may be useful for the better understanding of degradation mechanism of the imidazolium ILs in aqueous solutions.

  16. Recovery of ionic liquid via a hybrid methodology of electrodialysis with ultrafiltration after biomass pretreatment.

    PubMed

    Liang, Xiaocong; Fu, Yan; Chang, Jie

    2016-11-01

    Hybrid membrane-based methodology of electrodialysis (ED) with ultrafiltration (UF) was employed to recover the IL BmimBr (1-Butyl-3-methylimidazolium bromide) after biomass fractionation. Ultrafiltration was used to remove the residual lignin in IL solutions. Influence of molecular weight interception of UF treatment, initial IL concentration in dilute section, applied voltage and flow rate in each section of ED module were studied in detail. In this study, the highest overall IL recovery ratio reached 75.2% and the current efficiency of ED process approached 79.1%. Besides, the highest IL recovery performance of specific energy consumption was about 514.1g/kw·h. Insight gained from this study suggests a potential methodology for IL recovery after the pretreatment process for biomass.

  17. Thermodynamic, Dynamic, and Structural Properties of Ionic Liquids Comprised of 1-butyl-3-methylimidazolium Cation and Nitrate, Azide, or Dicyanamide Anions

    DTIC Science & Technology

    2010-04-28

    Voth used a coarse-grained model to investigate spatial heterogeneities in alkyl imidazolium based ILs with NO3 anion.xxii These simulations showed... imidazolium -based cations and N3 anion have been reported in the literature. II. Simulation details. Subsequently to the publication of the original...by examining atomistic intermolecular pair distribution functions. Specifically, in Figure 3 we show g(r) between hydrogens on imidazolium ring (Hi

  18. Ultraviolet Photoionization Efficiency of the Vaporized Ionic Liquid 1-Butyl-3-Methylimidazolium Tricyanomethanide: Direct Detection of the Intact Ion Pair (Post Print)

    DTIC Science & Technology

    2012-09-21

    Lovelock , K. R. J.; Satterly, C. J.; Villar-Garcia, I. J. Phys. Chem. Chem. Phys. 2007, 9, 982−990. (11) Strasser, D.; Goulay, F.; Kelkar, M. S.; Maginn, E...J.; Leone, S. R. J. Phys. Chem. A 2007, 111, 3191−3915. (12) Lovelock , K. R. J.; Deyko, A.; Corfield, J.-A.; Gooden, P. N.; Licence, P.; Jones, R. G

  19. On the importance of simultaneous infrared/fiber-optic temperature monitoring in the microwave-assisted synthesis of ionic liquids.

    PubMed

    Obermayer, David; Kappe, C Oliver

    2010-01-07

    The temperature profiles obtained from both an external infrared and internal fiber-optic sensor were compared for heating and synthesizing the ionic liquid 1-butyl-3-methylimidazolium bromide (bmimBr) under microwave conditions. Utilizing a single-mode microwave reactor that allows simultaneous infrared/fiber-optic temperature measurements, significant differences between the two methods of temperature monitoring were revealed. Due to the strong microwave absorptivity of ionic liquids and the delay experienced in monitoring temperature on the outer surface of a heavy-walled glass vial, external infrared temperature sensors can not be used to accurately control the temperature in the heating of ionic liquids under microwave conditions. The use of internal fiber-optic probes allows the monitoring and control of the heating behavior in a much better way. In order to prevent the strong exotherm in the synthesis of bmimBr under microwave conditions the use of a reaction vessel made out of silicon carbide is the method of choice. Because of the high thermal conductivity and effusivity of silicon carbide, the heat generated during the ionic liquid formation is efficiently exchanged with the comparatively cool air in the microwave cavity via the silicon carbide ceramic.

  20. A Sustainable Approach to the Stereoselective Synthesis of Diazaheptacyclic Cage Systems Based on a Multicomponent Strategy in an Ionic Liquid.

    PubMed

    Suresh Kumar, Raju; Almansour, Abdulrahman I; Arumugam, Natarajan; Altaf, Mohammad; Menéndez, José Carlos; Kumar, Raju Ranjith; Osman, Hasnah

    2016-01-29

    The microwave-assisted three-component reactions of 3,5-bis(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones, acenaphthenequinone and cyclic α-amino acids in an ionic liquid, 1-butyl-3-methylimidazolium bromide, occurred through a domino sequence affording structurally intriguing diazaheptacyclic cage-like compounds in excellent yields.

  1. Use of short chain alkyl imidazolium ionic liquids for on-line stacking and sweeping of methotrexate, flinic acid and folic acid: their application to biological fluids.

    PubMed

    Abd El-Hady, Deia; Albishri, Hassan M; Rengarajan, Rajesh; Wätzig, Hermann

    2014-07-01

    Methotrexate (MTX) is widely used for the treatment of many types of cancer. Folinic acid (FNA) and folic acid (FA) were usually simultaneously supplemented with MTX to reduce the side effects of a folate deficiency. This study, for the first time, included on-line sample preconcentration by stacking and sweeping techniques under reduced or enhanced electric conductivity in the sample region using short chain alkyl imidazolium ionic liquids (ILs) as micelle forming agents for analyte focusing. Both analyte focusing by micelle collapse (AFMC) and sweeping-MEKC had been investigated for the comparison of their effectiveness to examine simultaneously MTX, FNA and FA in plasma and urine under physiological conditions. In sweeping-MEKC, the sample solution without micelles was hydrodynamically injected as a long plug into a fused-silica capillary pre-filled with phosphate buffer containing 3.0 mol/L of 1-butyl-3-methylimidazolium bromide (BMIMBr). Using AFMC, the analytes were prepared in BMIMBr micellar matrix and hydrodynamically injected into the phosphate buffer without IL micelles. The conductivity ratio between BGE and sample (γ, BGE/sample) was optimized to be 3.0 in sweeping-MEKC and 0.33 in AFMC resulting the adequate separation of analytes within 4.0 min. To reduce the possibility of BMIMBr adsorption, an appropriate rinsing protocol was used. The limits of detection were calculated as 0.1 ng/mL MTX, 0.05 ng/mL FNA and 0.05 ng/mL FA by sweeping-MEKC and 0.5 ng/mL MTX, 0.3 ng/mL FNA and 0.3 ng/mL FA by AFMC. The accuracy was tested by recovery in plasma and urine matrices giving values ranging between 90 and 110%. Both stacking and sweeping by BMIMBr could be successfully used for the rapid, selective and sensitive determination of pharmaceuticals in complex matrices due to its fascinating properties, including high conductivity, good thermal stability and ability to form different types of interactions by electrostatic, hydrophobic, hydrogen bonding and

  2. Cyanogen bromide

    Integrated Risk Information System (IRIS)

    Cyanogen bromide ; CASRN 506 - 68 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  3. Vinyl bromide

    Integrated Risk Information System (IRIS)

    Vinyl bromide ; CASRN 593 - 60 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  4. Ionic liquids-lithium salts pretreatment followed by ultrasound-assisted extraction of vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside and vitexin from Phyllostachys edulis leaves.

    PubMed

    Hou, Kexin; Chen, Fengli; Zu, Yuangang; Yang, Lei

    2016-01-29

    An efficient method for the extraction of vitexin, vitexin-4″-O-glucoside, and vitexin-2″-O-rhamnoside from Phyllostachys edulis leaves comprises heat treatment using an ionic liquid-lithium salt mixture (using 1-butyl-3-methylimidazolium bromide as the solvent and lithium chloride as the additive), followed by ultrasound-assisted extraction. To obtain higher extraction yields, the effects of the relevant experimental parameters (including heat treatment temperature and time, relative amounts of 1-butyl-3-methylimidazolium bromide and lithium chloride, power and time of the ultrasound irradiation, and the liquid-solid ratio) are evaluated and response surface methodology is used to optimize the significant factors. The morphologies of the treated and untreated P. edulis leaves are studied by scanning electron microscopy. The improved extraction method proposed provides high extraction yield, good repeatability and precision, and has wide potential applications in the analysis of plant samples.

  5. Simultaneous determination of acrylamide, asparagine and glucose in food using short chain methyl imidazolium ionic liquid based ultrasonic assisted extraction coupled with analyte focusing by ionic liquid micelle collapse capillary electrophoresis.

    PubMed

    Abd El-Hady, Deia; Albishri, Hassan M

    2015-12-01

    Acrylamide (AA) is a known lethal neurotoxin and carcinogen. AA is formed in foods during the browning process by the Maillard reaction of glucose (GL) with asparagine (AS). For the first time, the simultaneous online preconcentration and separation of AA, AS and GL using analyte focusing by ionic liquid micelle collapse capillary electrophoresis (AFILMC) was presented. Samples were prepared in a 1-butyl-3-methylimidazolium bromide (BMIMBr) micellar matrix with a conductivity 4 times greater than that of the running buffer (12.5 mmol L(-1) phosphate buffer at pH 8.5). Samples were hydrodynamically injected into a fused silica capillary at 25.0 mbar for 25.0 s. Separations were performed by applying a voltage of 25.0 kV and a detection at 200.0 nm. To sufficiently reduce BMIMBr adsorption on the interior surface of capillary, an appropriate rinsing procedure by hydrochloric acid and water was optimized. AFILMC measurements of analytes within the concentration range of 0.05-10.0 μmol L(-1) achieved adequate reproducibility and accuracy with RSD 1.14-3.42% (n=15) and recovery 98.0-110.0%, respectively. Limits of detections were 0.71 ng g(-1) AA, 1.06 ng g(-1) AS and 27.02 ng g(-1) GL with linearity ranged between 2.2 and 1800 ng g(-1). The coupling of AFILMC with IL based ultrasonic assisted extraction (ILUAE) was successfully applied to the efficient extraction and determination of AA, AS and GL in bread samples. The structure of ILs has significant effects on the extraction efficiency of analytes. The optimal extraction efficiency (97.8%) was achieved by an aqueous extraction with 4:14 ratio of sample: 3.0 mol L(-1) BMIMBr followed by sonication at 35 °C. The proposed combination of ILUAE and AFILMC was simple, ecofriendly, reliable and inexpensive to analyze a toxic compound and its precursors in bread which is applicable to food safety.

  6. Reusable electrochemical sensor for bisphenol A based on ionic liquid functionalized conducting polymer platform.

    PubMed

    Wang, Jhe-Yi; Su, Ya-Ling; Wu, Bo-Hao; Cheng, Shu-Hua

    2016-01-15

    The toxicity of bisphenol A (BPA) has attracted considerable attention, and the reported electrochemical sensors for BPA need further improvement in reusability due to serious surface fouling. In this study, a composite film is designed aiming to provide both an accurate and repeatable platform for BPA determination. The conducting poly(3,4-ethylenedioxythiophene) film (PEDOT) and ionic liquid 1-butyl-3-methylimidazolium bromide (BMIMBr) were modified onto screen-printed carbon electrodes (SPCE) by electropolymerization and drop/spin methods, respectively. The surface characteristics of the composite film were characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and surface water contact angle experiments. The composite film-modified electrodes exhibited a linear response to BPA in the range of 0.1-500µM in pH 7.0 phosphate buffer solution (PBS) under optimized flow-injection amperometry. The method sensitivity and detection limit (S/N=3) were 0.2661μA μM(-1) (2.419μA μM(-1)cm(-2)) and 0.02µM, respectively. A relative standard deviation of 1.95% was obtained for 77 successive measurements of 10µM BPA, and the repeatability outperformed previously reported work. The proposed method was applied to detect BPA released from plastic water bottles using the standard addition method, and satisfactory recoveries were obtained. The electrochemical assay was validated by comparison with the chromatographic method, and the results showed good agreement between the two methods.

  7. Ipratropium bromide HFA.

    PubMed

    Wellington, Keri

    2005-01-01

    Ipratropium bromide is a nonselective antagonist of the muscarinic receptors located on airway smooth muscle, and is delivered via a metered-dose inhaler (MDI). Because of the requirement to phase out chlorofluorocarbon (CFC)-propelled MDIs, the ipratropium bromide inhalation aerosol MDI has been redesigned with a hydrofluoroalkane as the propellant (ipratropium bromide HFA). Ipratropium bromide HFA has recently been approved in the US for the maintenance treatment of bronchospasm associated with COPD. Ipratropium bromide HFA 42 microg four times daily (one dose [42 microg] is delivered via two puffs of the inhaler) demonstrated comparable efficacy to that of ipratropium bromide CFC 42 microg four times daily, as measured by spirometric testing, in a large, randomized, double-blind, placebo-controlled, 12-week trial in patients with stable COPD. Similarly, four-times-daily ipratropium bromide HFA 42 microg and ipratropium bromide CFC 42 microg provided a comparable degree of bronchodilation in patients with stable COPD during a 1-year, open-label study primarily designed to assess safety. In both studies, the tolerability profiles of ipratropium bromide HFA and ipratropium bromide CFC were comparable. The most common adverse events were related to respiratory system disorders. During the 1-year study, dry mouth was reported by 1.3% and 0.7% of patients in the ipratropium bromide HFA or ipratropium bromide CFC groups.

  8. Preparation of tamarind gum based soft ion gels having thixotropic properties.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2014-02-15

    Tamarind gum was used to prepare ion gels using both synthetic ionic liquids (ILs) namely 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium bromide and bio-based ionic liquids (Bio-ILs) namely choline acrylate, choline caproate and choline caprylate by heating cooling process. The gels were found to have good thermal stability and exhibited thixotropic behaviour. Upon relaxation after applied breaking strain, the recovery of gel structures after ten consecutive cycles was observed. The hydrogel of the gum prepared using ethanol aqueous solution had much inferior quality in terms of viscosity, viscoelasticity, thermal stability and thixotropicity when compared with the ion gels. The ion gels also showed very good adherence to human finger muscles and skin. The ion gels thus prepared may find application in electrochemistry, sensors, actuators and the gels prepared with Bio-ILs could even be useful in biomedical applications.

  9. Understanding chemical reactions of CO{sub 2} and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS{sub 2} in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

    SciTech Connect

    Cabaço, M. Isabel; Besnard, Marcel; Danten, Yann; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J.; Coutinho, João A. P.

    2014-06-28

    NMR spectroscopy ({sup 1}H, {sup 13}C, {sup 15}N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS{sub 2} leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH{sub 3}COS{sup −}), CO{sub 2}, OCS, and trithiocarbonate (CS{sub 3}{sup 2−}). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]{sup +} cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS{sub 2}-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO{sub 2}-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS{sub 2} reacts with the acetate anion leading to the formation of CH{sub 3}COS{sup −}, CO{sub 2}, and OCS. After these reactions have proceeded the nascent CO{sub 2} and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO{sub 2}) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO{sub 2}-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO{sub 2} molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO{sub 2}, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS{sub 2} is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2)

  10. Understanding chemical reactions of CO2 and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: the case of CS2 in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations.

    PubMed

    Cabaço, M Isabel; Besnard, Marcel; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J; Coutinho, João A P; Danten, Yann

    2014-06-28

    NMR spectroscopy ((1)H, (13)C, (15)N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS2 leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH3COS(-)), CO2, OCS, and trithiocarbonate (CS3 (2-)). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro](+) cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS2-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO2-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS2 reacts with the acetate anion leading to the formation of CH3COS(-), CO2, and OCS. After these reactions have proceeded the nascent CO2 and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO2) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO2-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO2 molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO2, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS2 is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2).

  11. Mercury Bromide Laser Research.

    DTIC Science & Technology

    1981-05-04

    Discharge", Optics Lett., 2(3), (March 1978). 7. R. Burnham, "Discharge Pumped Mercuric Halide Dissociation Lasers", Appl. Phys. Lett., 33: 15 (July 1978...laser and fluorescence signals. Neutral density filters served to prevent saturation of the detector during the laser measurements. F. Laser Output as a...REFERENCES . E. J. Schimitschek and J. E. Celto, " Mercuric Bromide Dissociation Laser in an Electric Discharge," Optics Lett. 2(3), March 1978. This

  12. Managing Nematodes without Methyl Bromide

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is an effective pre-plant soil fumigant used to control nematodes in many high-input, high-value production systems including vegetables, nurseries, ornamentals, tree fruits, strawberries, and grapes. Because methyl bromide has provided a reliable return on investment for nematode c...

  13. Iron bromide vapor laser

    NASA Astrophysics Data System (ADS)

    Sukhanov, V. B.; Shiyanov, D. V.; Trigub, M. V.; Dimaki, V. A.; Evtushenko, G. S.

    2016-03-01

    We have studied the characteristics of a pulsed gas-discharge laser on iron bromide vapor generating radiation with a wavelength of 452.9 nm at a pulse repetition frequency (PRF) of 5-30 kHz. The maximum output power amounted to 10 mW at a PRF within 5-15 kHz for a voltage of 20-25 kV applied to electrodes of the discharge tube. Addition of HBr to the medium produced leveling of the radial profile of emission. Initial weak lasing at a wavelength of 868.9 nm was observed for the first time, which ceased with buildup of the main 452.9-nm line.

  14. Bromide Adsorption by Reference Minerals and Soils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bromide, Br-, adsorption behavior was investigated on amorphous Al and Fe oxide, montmorillonite, kaolinite, and temperate and tropical soils. Bromide adsorption decreased with increasing solution pH with minimal adsorption occurring above pH 7. Bromide adsorption was higher for amorphous oxides t...

  15. Lanthanum Bromide Detectors for Safeguards Measurements

    SciTech Connect

    Wright, J.

    2011-05-25

    Lanthanum bromide has advantages over other popular inorganic scintillator detectors. Lanthanum bromide offers superior resolution, and good efficiency when compared to sodium iodide and lanthanum chloride. It is a good alternative to high purity germanium detectors for some safeguards applications. This paper offers an initial look at lanthanum bromide detectors. Resolution of lanthanum bromide will be compared lanthanum chloride and sodium-iodide detectors through check source measurements. Relative efficiency and angular dependence will be looked at. Nuclear material spectra, to include plutonium and highly enriched uranium, will be compared between detector types.

  16. Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide I. Surface properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide.

    PubMed

    Harkot, Joanna; Jańczuk, Bronisław

    2009-03-15

    Surface tension measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C(12)(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). Isotherms and thermodynamic adsorption parameters were determined from the surface tension data. Firstly, the surface excess concentration in the adsorbed monolayer and the total concentration of the surfactants were determined, then the standard free energy of adsorption was calculated by different methods. In the calculations, different orientations of the surfactants at the adsorbed monolayer were also taken into account. From the experimental and calculated data it results that the difference in the structure of the two cationic surfactants by changing the methyl group for aryl one in their heads causes an increase of the efficiency and a decrease of the effectiveness of adsorption at water-air interface, and that the standard free energy of adsorption can be predicted from the surface tension of the surfactants assuming the aryl group to be equivalent to 3.5 methylene groups. The experimentally obtained difference between the standard free energy of adsorption of the C(12)(EDMAB) and BDDAB was in good agreement with that theoretically accounted, corresponding to the standard free energy of adsorption of the aryl group. However, the best correlation between the values was obtained when a parallel orientation of the surfactant molecules at the adsorbed monolayer was taken into account.

  17. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be...) Bromoacetone, methyl bromide, chloropicrin and methyl bromide mixtures, chloropicrin and methyl...

  18. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be... Group I performance level. (b) Bromoacetone, methyl bromide, chloropicrin and methyl bromide...

  19. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be...) Bromoacetone, methyl bromide, chloropicrin and methyl bromide mixtures, chloropicrin and methyl...

  20. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... methyl bromide or methyl chloride mixtures, etc. 173.193 Section 173.193 Transportation Other Regulations... bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be... Group I performance level. (b) Bromoacetone, methyl bromide, chloropicrin and methyl bromide...

  1. Neurological manifestation of methyl bromide intoxication.

    PubMed

    Suwanlaong, Kanokrat; Phanthumchinda, Kammant

    2008-03-01

    Methyl bromide is a highly toxic gas with poor olfactory warning properties. It is widely used as insecticidal fumigant for dry foodstuffs and can be toxic to central and peripheral nervous systems. Most neurological manifestations of methyl bromide intoxication occur from inhalation. Acute toxicity characterized by headache, dizziness, abdominal pain, nausea, vomiting and visual disturbances. Tremor, convulsion, unconsciousness and permanent brain damage may occur in severe poisoning. Chronic exposure can cause neuropathy, pyramidal and cerebellar dysfunction, as well as neuropsychiatric disturbances. The first case of methyl bromide intoxication in Thailand has been described. The patient was a 24-year-old man who worked in a warehouse of imported vegetables fumigated with methyl bromide. He presented with unstable gait, vertigo and paresthesia of both feet, for two weeks. He had a history of chronic exposure to methyl bromide for three years. His fourteen co-workers also developed the same symptoms but less in severity. Neurological examination revealed ataxic gait, decreased pain and vibratory sense on both feet, impaired cerebellar signs and hyperactive reflex in all extremities. The serum concentration of methyl bromide was 8.18 mg/dl. Electrophysilogical study was normal. Magnetic resonance imaging of the brain (MRI) revealed bilateral symmetrical lesion of abnormal hypersignal intensity on T2 and fluid-attenuation inversion recovery (FLAIR) sequences at bilateral dentate nuclei of cerebellum and periventricular area of the fourth ventricle. This incident stresses the need for improvement of worker education and safety precautions during all stages of methyl bromide fumigation.

  2. Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide: II. Volumetric properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide.

    PubMed

    Harkot, Joanna; Jańczuk, Bronisław

    2009-02-15

    Density measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C(12)(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). On the basis of the obtained results of the measurements the CMC and partial molar volumes of the surfactants studied were also determined. The obtained CMC values were also analyzed with those accounted on the basis of the surface tension data from the previous paper [J. Harkot, B. Jańczuk, J. Colloid Interface Sci. (2008), submitted for publication]. The values of CMC determined from the surface tension and density measurements for C(12)(EDMAB) are equal to 9.9x10(-3) and 1.5x10(-2) M and for BDDAB to 5.25x10(-3) and 5.3x10(-3) M, respectively. These obtained values are very similar. However, in the literature it is difficult to find the CMC values for C(12)(EDMAB) and BDDAB determined by these two methods used by us-especially from the density measurements for BDDAB and surface tension measurements for C(12)(EDMAB). In the case of the apparent molar volumes of C(12)(EDMAB) there is a good agreement between the values obtained by us and those found in the literature. The CMC values for C(12)(EDMAB) and BDDAB were also determined on the basis of their surface tension and free energy of electrostatic interactions between the polar heads of these surfactants and compared with those obtained from the surface tension and density measurements. It was found that the theoretically obtained CMC values were close to those determined from the density and surface tension data for the C(12)(EDMAB) and that the ratios of the CMC values of the surfactants to their concentration at which the water surface tension decreased by about 20 mN/m proved that the presence of the aryl group in the BDDAB head instead of the methyl group caused that its micellization process was more inhibited in relation to its adsorption at air-water interface than that of C(12)(EDMAB).

  3. Growth and characterization of lead bromide crystals

    NASA Technical Reports Server (NTRS)

    Singh, N. B.; Gottlieb, M.; Henningsen, T.; Hopkins, R. H.; Mazelsky, R.; Glicksman, M. E.; Coriell, S. R.; Santoro, G. J.; Duval, W. M. B.

    1992-01-01

    Lead(II) bromide was purified by a combination of directional freezing and zone-refining methods. Differential thermal analysis of the lead bromide showed that a destructive phase transformation occurs below the melting temperature. This transformation causes extensive cracking, making it very difficult to grow a large single crystal. Energy of phase transformation for pure lead bromide was determined to be 24.67 cal/g. To circumvent this limitation, crystals were doped by silver bromide which decreased the energy of phase transformation. The addition of silver helped in achieving the size, but enhanced the inhomogeneity in the crystal. The acoustic attenuation constant was almost identical for the pure and doped (below 3000 ppm) crystals.

  4. Emission of methyl bromide from biomass burning

    SciTech Connect

    Manoe, S.; Andreae, M.O. )

    1994-03-04

    Bromine is, per atom, far more efficient than chlorine in destroying stratospheric ozone, and methyl bromide is the single largest source of stratospheric bromine. The two main previously known sources of this compound are emissions from the ocean and from the compound's use as an agricultural pesticide. Laboratory biomass combustion experiments showed that methyl bromide was emitted in the smoke from various fuels tested. Methyl bromide was also found in smoke plumes from wildfires in savannas, chaparral, and boreal forest. Global emissions of methyl bromide from biomass burning are estimated to be in the range of 10 to 50 gigagrams per year, which is comparable to the amount produced by ocean emission and pesticide use and represents a major contribution ([approximately]30 percent) to the stratospheric bromine budget.

  5. Reactions of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We found that starches are found to be soluble at 80 ºC in ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-butyl-3-methylimidazolium dicyanamide (BMIMdca) in concentration up to 10% (w/w). Higher concentrations of biopolymers in these novel solvents resulted in solutions w...

  6. Development of sample preparation method for isoliquiritigenin, liquiritin, and glycyrrhizic acid analysis in licorice by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection.

    PubMed

    Yang, Lei; Li, Li-li; Liu, Ting-ting; Zu, Yuan-gang; Yang, Feng-jian; Zhao, Chun-jian; Zhang, Lin; Chen, Xiao-qiang; Zhang, Zhong-hua

    2013-05-01

    An ionic liquid-based ultrasonic-assisted extraction (ILUAE) method had been used for the effective extraction of isoliquiritigenin (IQ), liquiritin (LQ) and glycyrrhizic acid (GA) from licorice. The ionic liquids with different cations and anions were investigated in this work and 0.5 M 1-butyl-3-methylimidazolium bromide solution was selected as solvent. In addition, the technical parameters including soaking time, solid-liquid ratio, ultrasonic power and time were optimized. Compared with the conventional solvent extraction, the proposed approach exhibited higher efficiency, which indicated the ILUAE was an efficient, rapid and simple sample preparation technique. There was no degradation of the target analytes had been observed at the optimum conditions which was evidenced by the stability studies performed with standard of IQ, LQ and GA. The proposed method also showed high reproducibility and was environmental friendly.

  7. Development of sample preparation method for eleutheroside B and E analysis in Acanthopanax senticosus by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection.

    PubMed

    Yang, Lei; Ge, Hongshuang; Wang, Wenjie; Zu, Yuangang; Yang, Fengjian; Zhao, Chunjian; Zhang, Lin; Zhang, Ying

    2013-12-01

    An ionic liquids-based ultrasonic-assisted extraction (ILUAE) method was successfully developed for extracting eleutheroside B and E from Radix Acanthopanax senticosus. Thirteen 1-alkyl-3-methylimidazolium ionic liquids with different cations and anions were investigated and 1-butyl-3-methylimidazolium bromide ([C4mim]Br) solution was selected as the solvent. The conditions for ILUAE, including the ionic liquid concentration, soaking time, ultrasonic power, ultrasonic time, solid-liquid ratio and number of extraction cycles, were optimized. With the proposed method, the energy consumption time was reduced to 30 min, whereas conventional method requires about 4h. The proposed method had good recovery (97.96-103.39%) and reproducibility (RSD, n=5; 3.3% for eleutheroside B, 4.6% for eleutheroside E). ILUAE was an efficient, rapid and simple sample preparation technique that showed high reproducibility and was environmental friendly.

  8. Rapid Carbonation for Calcite from a Solid-Liquid-Gas System with an Imidazolium-Based Ionic Liquid

    PubMed Central

    Ibrahim, Abdul-Rauf; Vuningoma, Jean Bosco; Huang, Yan; Wang, Hongtao; Li, Jun

    2014-01-01

    Aqueous carbonation of Ca(OH)2 is a complex process that produces calcite with scalenohedral calcite phases and characterized by inadequate carbonate species for effective carbonation due to the poor dissolution of CO2 in water. Consequently, we report a solid-liquid-gas carbonation system with an ionic liquid (IL), 1-butyl-3-methylimidazolium bromide, in view of enhancing the reaction of CO2 with Ca(OH)2. The use of the IL increased the solubility of CO2 in the aqueous environment and enhanced the transport of the reactive species (Ca2+ and CO32−) and products. The presence of the IL also avoided the formation of the CaCO3 protective and passivation layer and ensured high carbonation yields, as well as the production of stoichiometric rhombohedral calcite phases in a short time. PMID:24968273

  9. Effects of ionic liquid and nanogold particles on high-performance liquid chromatography-electrochemical detection and their application in highly efficient separation and sensitive analysis of five phenolic acids in Xuebijing injection.

    PubMed

    Jia, Pu; Wang, Shixiang; Meng, Xue; Lan, Wei; Luo, Jing; Liao, Sha; Xiao, Chaoni; Zheng, Xiaopu; Li, Lianshe; Liu, Qinshe; Zheng, Jianbin; Zhou, Yuanzhen; Zheng, Xiaohui

    2013-03-30

    A novel high performance liquid chromatography-electrochemical detector (HPLC-ECD) analytical system was developed in this study by integratedly utilizing ionic liquid (IL) of 1-butyl-3-methylimidazolium bromide and an additive of gold nanoparticles. The resulted pilot study was first performed to assess the effects of 1-butyl-3-methylimidazolium bromide and gold nanoparticles on the chromatographic characteristics of five phenolic acids in Xuebijing injection, including danshensu (DSS), protocatechuic acid (PA), protocatechuic aldehyde (PAH), hydroxy safflower yellow A (HSYA) and ferulic acid (FA). It was notable to observe that retainability of the phenolic acids were markly lowered by IL addition. Compared with the cases without IL addition, the retention times of DSS, PA, PAH, HSYA and FA have decreased 2.851, 1.532, 1.53, 0.818 and 0.552 min, respectively when 0.6% IL in the mobile phase. In addition, the corresponding theoretical plate numbers and peak areas for these compounds were significantly increased. Area response for DSS, PA, PAH, HSYA and FA were enhanced by 772%, 628%, 584%, 703% and 600%, respectively. It was observed that nano-gold catalysis power enabled peak areas of DSS, PAH, FA and PA to enhance 5.7, 6.2, 8.5 and 66.5 times relative to the case with addition of IL. Altogether, the optimized HPLC-ECD system was successfully applied to the pharmacokinetics study of Xuebijing injection with underlying applicability to in vivo and in vitro analysis of a variety of natural product from Chinese medicine plants, TCM formulae and associated patent TCM preparation.

  10. METHYL BROMIDE ALTERNATIVES FOR CALIFORNIA STRAWBERRY NURSERIES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of methyl bromide (MB) alternative fumigants on soil pests, plant productivity in nursery and fruiting fields, as well as production costs, were evaluated in California strawberry nurseries by an interdisciplinary team. Our trials followed nursery stock through low and high elevation ph...

  11. Methyl bromide emissions from tarped fields

    SciTech Connect

    Cicerone, R.J.; Williams, J.; Wang, N.Y.

    1995-12-31

    Once in the stratosphere, bromine atoms can destroy ozone effectively. Because of this potential effect, certain organobromine compounds including methyl bromide (MeBr) are being controlled or eliminated by national and international regulations. It would be valuable to determine the fraction of MeBr used in soil fumigations that subsequently enters the atmosphere to better assess the need for, and value of, strong regulations. We have designed and conducted several experiments accompanying field fumigations with MeBr/chloropicrin mixtures. In each of three field-fumigation experiments new Irvine, CA in which the fumigated field was covered immediately with plastic tarping, we have deployed static flux chambers on top of the tarping and measured escape fluxes of MeBr. After tarp removal, the same chambers were replaced on the bare soil to continue the measurements. We have also measured soil bromide contents before and after the fumigation. One experiment yielded an escape fraction of 80 to 87% (with 19% remaining as bromide) while the other two experiments yielded escape fractions of 30 to 35% (with about 70% remaining as bromide). This paper will summarize stratospheric bromine chemistry, describe the field experiments and discuss factors that influence emissions, including soil pH, moisture and organic content and injection technique. We acknowledge TriCal, Inc. for many helpful discussions and for professional field applications of MeBr.

  12. Cherry angiomas associated with exposure to bromides.

    PubMed

    Cohen, A D; Cagnano, E; Vardy, D A

    2001-01-01

    Cherry angiomas are the most common vascular proliferation; however, little is known about the pathogenesis and etiology of these lesions. We present two laboratory technicians who were exposed to brominated compounds for prolonged periods and who developed multiple cherry angiomas on the trunk and extremities. We suggest that the association between exposure to bromides and cherry angiomas should be investigated by a controlled study.

  13. Methyl Bromide Investigation Expands to Puerto Rico

    EPA Pesticide Factsheets

    (New York, N.Y.) The U.S. Environmental Protection Agency, working with the Virgin Islands government, is investigating the March 2015 incident involving the use of a pesticide containing methyl bromide to fumigate a residence at the Sirenusa apartments on

  14. Flow injection determination of bromide ion in a developer using bromide ion-selective electrode detector.

    PubMed

    Masadome, T; Asano, Y; Nakamura, T

    1999-10-01

    A potentiometric flow injection determination method for bromide ion in a developer was proposed, by utilizing a flow-through type bromide ion-selective electrode detector. The sensing membrane of the electrode was Ag(2)S-AgBr membrane. The response of the electrode detector as a peak-shape signal was obtained for injected bromide ion in a developer. A linear relationship was found to exist between peak height and the concentration of the bromide ion in a developer in a concentration range from 1.0x10(-3) to 1.0x10(-2) mol l(-1). The relative standard deviation for 10 injections of a 6x10(-3) mol l(-1) bromide ion in a developer was 1.3% and the sampling rate was ca 17-20 samples h(-1). The present method was free from the interference of an organic reducing reagent, an organic substance in a developer sample solution for the determination of bromide ion in a developer.

  15. Measurements of atmospheric methyl bromide and bromoform

    SciTech Connect

    Cicerone, R.J.; Heidt, L.E.; Pollock, W.H.

    1988-04-20

    We have measured gaseous methyl bromide (CH/sub 3/Br) and bromoform (CHBr/sub 3/) in air samples that were gathered approximately weekly from five ground-level sites: Point Barrow, Alaska; Mauna Loa Observatory and Cape Kumukahi, Hawaii; Matatula, Samoa; and Kaitorete Spit, New Zealand. Approximately 750 samples have been analyzed for CH/sub 3/Br between January 1985 and October 1987 and 990 samples have been analyzed for CHBr/sub 3/ between early 1984 and September 1987, all by gas chromatography/mass spectroscopy. Methyl bromide concentrations are typically 10--11 parts per trillion (ppt) by volume; there are no clear indications of temporal increases. Bromoform concentrations are typically 2--3 ppt, but large seasonal variations are seen at Point Barrow. copyright American Geophysical Union 1988

  16. Thallium bromide iodide crystal acoustic anisotropy examination.

    PubMed

    Mantsevich, S N

    2017-03-01

    Thallium bromide iodide crystal also known as KRS-5 is the well known material used in far infrared radiation applications for optical windows and lenses fabrication. The main advantage of this material is the transparency in wide band of wavelengths from 0.53 to 50μm. Despite such advantages as transparency and large acousto-optic figure of merit values, KRS-5 is rarely used in acousto-optics. Nevertheless this material seems to be promising for far infrared acousto-optic applications. The acoustic and acousto-optic properties of KRS-5 needed for the full use in optoelectronics are not well understood to date. In this paper the detailed examination of thallium bromide iodide crystal acoustic properties is presented.

  17. Data for methyl bromide decon testing

    EPA Pesticide Factsheets

    Spreadsheets containing data for recovery of spores from different materials. Data on the fumigation parameters are also included.This dataset is associated with the following publication:Wood , J., M. Wendling, W. Richter, A. Lastivka, and L. Mickelsen. Evaluation of the Efficacy of Methyl Bromide in the Decontamination of Building and Interior Materials Contaminated with Bacillus anthracis Spores. APPLIED AND ENVIRONMENTAL MICROBIOLOGY. American Society for Microbiology, Washington, DC, USA, 1-28, (2016).

  18. Ipratropium bromide in children with asthma.

    PubMed Central

    Mann, N P; Hiller, E J

    1982-01-01

    Eighteen children between 6 and 14 years of age with perennial asthma were studied over two four-week treatment periods. Ipratropium bromide, given in addition to their current treatment, was compared with placebo using a double-blind crossover technique. The period of treatment with ipratropium was associated with a significant reduction in symptoms during both day and night and significantly higher morning peak expiratory flow rates. PMID:6461943

  19. Methyl bromide users search for science

    SciTech Connect

    Winegar, E.D.

    1995-01-01

    Workers, neighbors and the ozone are protected by regulation from this chemical, but those needing it complain that a solid foundation is lacking for the rules. Although not yet featured on {open_quotes}60 Minutes,{close_quotes} the pesticide methyl bromide is gaining widespread attention because of its central position in debates about worker health and safety, environmental toxics exposure and global ozone depletion.

  20. [Research advances in methyl bromide in the ocean].

    PubMed

    Du, Hui-na; Xie, Wen-xia; Cui, Yu-qian; Chen, Jian-lei; Ye, Si-yuan

    2014-12-01

    Methyl bromide is an important atmospheric trace gas, which plays significant roles in the global warming and atmospheric chemistry. The ocean plays important and complex roles in the global biogeochemical cycles of methyl bromide, not only the source of atmospheric methyl bromide, but also the sink. Therefore, developing the chemical research of the soluble methyl bromide in the ocean, will not only have a certain guiding significance to the atmospheric ozone layer protection, but also provide a theoretical basis for estimating methyl bromide's contribution to the global environmental change on global scale. This paper reviewed the research advances on methyl bromide in the ocean, from the aspects of the biogeochemical cycle of methyl bromide in the ocean, the analysis and determination method, the concentration distribution, the sea-to-air flux and its sources and sinks in the atmosphere. Some deficiencies in the current studies were put forward, and the directions of the future studies were prospected.

  1. Methyl bromide volatility measurements from treated fields

    SciTech Connect

    Majewski, M.S.; Woodrow, J.E.; Seiber, J.N. |

    1995-12-31

    Methyl bromide is used as an agricultural soil fumigant and concern is growing over the role it may play in the depletion of stratospheric ozone. Methyl bromide is applied using various techniques and little is known about how much of the applied fumigant volatilizes into the atmosphere after application. The post-application volatilization losses of methyl bromide from two fields using different application practices were measured using an aerodynamic-gradient technique. One field was covered with a high-barrier plastic film tarp during application and the other was left uncovered, but the furrows made by the injection shanks were bedded over. The cumulative volatilization losses from the tarped field were 22% of the nominal application within the first 5 days of the experiment and about 32% of the nominal application within 9 days including the one day after the tarp was removed on day 8. The nontarped field lost 89%of the nominal application by volatilization in 5 days. The error associated, with each flux measurement, as well as variations in daily flux losses with differing sampling period lengths show the degree of variability inherent in this type of study.

  2. Methyl bromide fate in fumigated soils

    SciTech Connect

    Anderson, T.A.; Rice, P.J.; Cink, J.H.

    1995-12-31

    Although widespread use of methyl bromide (MeBr) as a sail and structure fumigant has previously been recognized as a potential significant source of atmospheric MeBr, losses have not been well quantified. Our research indicates that, in laboratory studies, MeBr is volatilized rapidly from fumigated soils and that volatility increases with temperature (35{degrees}C > 25{degrees}C and 15{degrees}C) and moisture (0.03 bar and 0.3 bar > 1 bar > 3 bar). Degradation of MeBr in soil, as indicated by production of bromide ion, was also directly related to temperature and moisture. Most of the soil degradation of MeBr in these studies appears to be abiotic based on the observation of toxicity (reduced microbial respiration) in fumigated soils. We also determined the transformation and movement of MeBr in undisturbed soil columns. These studies also indicated that MeBT volatilizes rapidly (> 50% in 48 h) from soil. In addition, MeBr was not detected in the leachate from the soil columns, however, bromide ion was detected at levels above background 48 h after fumigation and peaked at 5 weeks.

  3. The neurological effects of methyl bromide intoxication.

    PubMed

    de Souza, Aaron; Narvencar, Kedareshwar P S; Sindhoora, K V

    2013-12-15

    Used primarily as a fumigant or as a substrate in chemical processes, methyl bromide is a highly toxic gas. The gas is usually absorbed by inhalation and effects on the lungs, gastrointestinal tract, skin, and brain are seen. Numerous instances of acute and chronic neurologic injury have been reported: acute poisoning results in seizures, myoclonus, ataxia or cerebral oedema beginning as early as 30 min after exposure while subacute or chronic intoxication presents with diverse slowly progressive neurological and neurobehavioral symptoms. Serum bromide levels may be elevated, but often return rapidly to normal. Electroencephalography may show frontally-predominant slow waves or polyspikes with following slow wave, and MRI reveals characteristic involvement in the dentate nucleus of the cerebellum, the brainstem, and the splenium of the corpus callosum. Symmetric and selective lesions in characteristic sites are observed on imaging and on histopathological examination. These are likely produced by methylation of intracellular lipids, protein and glutathione; production of toxic metabolites; defective neurotransmitter function; and abnormal oxidative phosphorylation. This article reviews the toxic effects of this gas, the pathophysiology and symptoms of its effects on the nervous system, and characteristic findings on MRI; and presents an illustrative case of methyl bromide intoxication due to exposure at a factory producing the compound commercially.

  4. Europium-doped barium bromide iodide

    SciTech Connect

    Gundiah, Gautam; Hanrahan, Stephen M.; Hollander, Fredrick J.; Bourret-Courchesne, Edith D.

    2009-10-21

    Single crystals of Ba0.96Eu0.04BrI (barium europium bromide iodide) were grown by the Bridgman technique. The title compound adopts the ordered PbCl2 structure [Braekken (1932). Z. Kristallogr. 83, 222-282]. All atoms occupy the fourfold special positions (4c, site symmetry m) of the space group Pnma with a statistical distribution of Ba and Eu. They lie on the mirror planes, perpendicular to the b axis at y = +-0.25. Each cation is coordinated by nine anions in a tricapped trigonal prismatic arrangement.

  5. Advanced hydrogen electrode for hydrogen-bromide battery

    NASA Technical Reports Server (NTRS)

    Kosek, Jack A.; Laconti, Anthony B.

    1987-01-01

    Binary platinum alloys are being developed as hydrogen electrocatalysts for use in a hydrogen bromide battery system. These alloys were varied in terms of alloy component mole ratio and heat treatment temperature. Electrocatalyst evaluation, performed in the absence and presence of bromide ion, includes floating half cell polarization studies, electrochemical surface area measurements, X ray diffraction analysis, scanning electron microscopy analysis and corrosion measurements. Results obtained to date indicate a platinum rich alloy has the best tolerance to bromide ion poisoning.

  6. [Spectrophotometer detection of benzalkonium bromide concentration in seawater].

    PubMed

    Pan, Jianyu; Yin, Pinghe; Zhao, Ling; Qi, Yuzao; Xie, Longchu

    2003-07-01

    Benzalkonium bromide is a high-efficiency algaecide. Its concentration in seawater was measured by the method of spectrophotometer. The results indicated that the deposition appeared if the concentration of benzalkonium bromide in seawater was more than 50 mg.L-1, and affected the detection of benzalkonium bromide. But, there was a good linear relationship between concentration and absorbance when the concentration was lower than 50 mg.L-1 (R2 = 0.9996). Therefore, spectrophotometer could be used to detect benzalkonium bromide in seawater.

  7. An Ill Wind: Methyl Bromide Use Near California Schools, 1998.

    ERIC Educational Resources Information Center

    Ross, Zev; Walker, Bill

    A California study investigates the use of the toxic pesticide methyl bromide near the state's public schools, explains why proposed safety rules have failed to protect children and others from exposure, and examines regions at particular exposure risk. Study results show an increasing exposure to methyl bromide near schools already at risk while…

  8. 40 CFR 721.10393 - Sodium bromide MDA complex (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Sodium bromide MDA complex (generic... Specific Chemical Substances § 721.10393 Sodium bromide MDA complex (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as sodium...

  9. Sir Charles Locock and potassium bromide.

    PubMed

    Eadie, M J

    2012-01-01

    On 12 May 1857, Edward Sieveking read a paper on epilepsy to the Royal Medical and Chirurgical Society in London. During the discussion that followed Sir Charles Locock, obstetrician to Queen Victoria, was reported to have commented that during the past 14 months he had used potassium bromide to successfully stop epileptic seizures in all but one of 14 or 15 women with 'hysterical' or catamenial epilepsy. This report of Locock's comment has generally given him credit for introducing the first reasonably effective antiepileptic drug into medical practice. However examination of the original reports raises questions as to how soundly based the accounts of Locock's comments were. Subsequently, others using the drug to treat epilepsy failed to obtain the degree of benefit that the reports of Locock's comments would have led them to expect. The drug might not have come into more widespread use as a result, had not Samuel Wilks provided good, independent evidence for the drug's antiepileptic efficacy in 1861.

  10. Single ion dynamics in molten sodium bromide

    SciTech Connect

    Alcaraz, O.; Trullas, J.; Demmel, F.

    2014-12-28

    We present a study on the single ion dynamics in the molten alkali halide NaBr. Quasielastic neutron scattering was employed to extract the self-diffusion coefficient of the sodium ions at three temperatures. Molecular dynamics simulations using rigid and polarizable ion models have been performed in parallel to extract the sodium and bromide single dynamics and ionic conductivities. Two methods have been employed to derive the ion diffusion, calculating the mean squared displacements and the velocity autocorrelation functions, as well as analysing the increase of the line widths of the self-dynamic structure factors. The sodium diffusion coefficients show a remarkable good agreement between experiment and simulation utilising the polarisable potential.

  11. Degradation of methyl bromide in anaerobic sediments

    USGS Publications Warehouse

    Oremland, R.S.; Miller, L.G.; Strohmaler, F.E.

    1994-01-01

    Methyl bromide (MeBr) was anaerobically degraded in saltmarsh sediments after reaction with sulfide. The product of this nucleophilic substitution reaction was methanethiol, which underwent further chemical and bacterial reactions to form dimethyl sulfide. These two gases appeared transiently during sediment incubations because they were metabolized by methanogenic and sulfate-reducing bacteria. A second, less significant reaction of MeBr was the exchange with chloride, forming methyl chloride, which was also susceptible to attack by sulfide. Incubation of 14C-labeled methyl iodide as an analogue of MeBr resulted in the formation of 14CH4 and 14CO2 and also indicated that sulfate-reducing bacteria as well as methanogens metabolized the methylated sulfur intermediates. These results suggest that exposed sediments with abundant free sulfide, such as coastal salt-marshes, may constitute a sink for atmospheric MeBr.

  12. Indirect spectrophotometric determination of traces of bromide in water

    USGS Publications Warehouse

    Fishman, M. J.; Skougstad, M.W.

    1963-01-01

    A rapid, accurate, and sensitive indirect spectrophotometric method for the determination of bromide in natural waters is based on the catalytic effect of bromide on the oxidation of iodine to iodate by potassium permanganate in sulfuric acid solution. The method is applicable to concentrations ranging from 1 to 100 ??g. of bromide per liter, but may be modified to extend the concentration range. Most ions commonly occurring in water do not interfere. The standard deviation is 2.9 at bromide concentrations of 100 ??g. per liter and less at lower concentrations. The determination of bromide in samples containing known added amounts gave values ranging from 99 to 105% of the concentration calculated to be present.

  13. Selective oxidation of bromide in wastewater brines from hydraulic fracturing.

    PubMed

    Sun, Mei; Lowry, Gregory V; Gregory, Kelvin B

    2013-07-01

    Brines generated from oil and natural gas production, including flowback water and produced water from hydraulic fracturing of shale gas, may contain elevated concentrations of bromide (~1 g/L). Bromide is a broad concern due to the potential for forming brominated disinfection byproducts (DBPs) during drinking water treatment. Conventional treatment processes for bromide removal is costly and not specific. Selective bromide removal is technically challenging due to the presence of other ions in the brine, especially chloride as high as 30-200 g/L. This study evaluates the ability of solid graphite electrodes to selectively oxidize bromide to bromine in flowback water and produced water from a shale gas operation in Southwestern PA. The bromine can then be outgassed from the solution and recovered, as a process well understood in the bromine industry. This study revealed that bromide may be selectively and rapidly removed from oil and gas brines (~10 h(-1) m(-2) for produced water and ~60 h(-1) m(-2) for flowback water). The electrolysis occurs with a current efficiency between 60 and 90%, and the estimated energy cost is ~6 kJ/g Br. These data are similar to those for the chlor-alkali process that is commonly used for chlorine gas and sodium hydroxide production. The results demonstrate that bromide may be selectively removed from oil and gas brines to create an opportunity for environmental protection and resource recovery.

  14. Chloride, bromide and iodide scintillators with europium

    DOEpatents

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  15. Novel microemulsions: ionic liquid-in-ionic liquid.

    PubMed

    Cheng, Siqing; Zhang, Jianling; Zhang, Zhaofu; Han, Buxing

    2007-06-28

    The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.

  16. Methyl Bromide Commodity Fumigation Buffer Zone Lookup Tables

    EPA Pesticide Factsheets

    Product labels for methyl bromide used in commodity and structural fumigation include requirements for buffer zones around treated areas. The information on this page will allow you to find the appropriate buffer zone for your planned application.

  17. 7 CFR 305.6 - Methyl bromide fumigation treatment schedules.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., fumigation with methyl bromide for sapote fruit fly. Regulated citrus fruits originating inside an area quarantined for sapote fruit fly that are to be moved outside the quarantined area may be treated with...

  18. Computational and vibrational spectroscopic studies of ipratropium bromide.

    PubMed

    Ali, H R H; Edwards, H G M; Kendrick, J; Scowen, I J

    2009-02-01

    In this study, ipratropium bromide is investigated using vibrational spectroscopy and quantum chemical calculations. The structure of ipratropium bromide was optimised using density functional theory calculations and the geometry optimisation has been carried out on two conformations with and without intramolecular hydrogen bonding. Infrared and Raman spectra were calculated from the optimised structures. Many modes in the calculated spectra could be matched with the experimental spectra and a description of the modes is given. By analysis of the theoretical vibrational modes, it is shown that ipratropium bromide specimens are likely to be a mixture of the two conformations with and without intramolecular hydrogen bonding. In addition, several spectral features and band intensities in the CH and OH stretching regions are explained. Quantum mechanical calculations allowed improved understanding of ipratropium bromide and its vibrational spectra.

  19. Pd-Catalyzed Nucleophilic Fluorination of Aryl Bromides

    PubMed Central

    2015-01-01

    On the basis of mechanism-driven reaction design, a Pd-catalyzed nucleophilic fluorination of aryl bromides and iodides has been developed. The method exhibits a broad substrate scope, especially with respect to nitrogen-containing heteroaryl bromides, and proceeds with minimal formation of the corresponding reduction products. A facilitated ligand modification process was shown to be critical to the success of the reaction. PMID:24559304

  20. Synthesis, self-aggregation and biological properties of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride.

    PubMed

    Lukáč, Miloš; Mrva, Martin; Garajová, Mária; Mojžišová, Gabriela; Varinská, Lenka; Mojžiš, Ján; Sabol, Marián; Kubincová, Janka; Haragová, Hana; Ondriska, František; Devínsky, Ferdinand

    2013-08-01

    A series of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride have been synthesized. Their physicochemical properties were also investigated. The critical micelle concentration (cmc), the surface tension value at the cmc (γcmc), and the surface area at the surface saturation per head group (Acmc) were determined by means of surface tension measurements. The prepared compounds exhibit significant cytotoxic, antifungal and antiprotozoal activities. Alkylphosphocholines and alkylphosphohomocholines possess higher antifungal activity against Candida albicans in comparison with quaternary ammonium compounds in general. However, quaternary ammonium compounds exhibit significantly higher activity against human tumor cells and pathogenic free-living amoebae Acanthamoeba lugdunensis and Acanthamoeba quina compared to alkylphosphocholines. The relationship between structure, physicochemical properties and biological activity of the tested compounds is discussed.

  1. Spectral characteristics of the bentonite loaded with benzyldimethyloctadecylammonium chloride, hexadecyltrimethylammonium bromide and dimethyldioctadecylammonium bromide

    NASA Astrophysics Data System (ADS)

    Majdan, Marek; Maryuk, Oksana; Gładysz-Płaska, Agnieszka; Pikus, Stanisław; Kwiatkowski, Ryszard

    2008-02-01

    The spectral characterization, including the FTIR, DRIFT (diffusive reflectance), SWAXS (small and wide angle X-ray scattering) spectra comparison of the sodium bentonite modified by BDMODA-Cl (benzyldimethyloctadecylammonium chloride), HDTMA-Br (hexadecyltrimethylammonium bromide), DDA-Br (dimethyldioctadecylammonium bromide) is presented in the paper. The FTIR spectra show the shift of C-H stretching vibrations: νsym(CH2), νasym(CH2) of surfactants methylene chains toward lower frequencies (from 2855 to 2851 cm -1 for νsym(CH2) and from 2927 to 2918 cm -1 for νansym(CH2) with the surfactant concentration in bentonite phase. The bending vibrations δH-O-H in water molecules change their positions in the direction of higher frequencies (from 1634 to 1647 cm -1) with the surfactant concentration for bentonite-BDMODA and bentonite-DDA contrary to bentonite-HDTMA, where the constant position δH-O-H is explained as the consequence of the lower concentration of the hydrogen bonded water in bentonite-HDTMA phase when compared with the remaining forms of bentonite. The DRIFT spectra reveal dramatic shift of the νSi-O stretching vibration toward higher frequencies upon intercalation of the sodium bentonite with the surfactant cations. The SWAXS spectra and SEM images of the bentonite are the evidence of somewhat different sorption mechanism of DDA-Br when compared with the BDMODA-Cl and HDTMA-Br, including remarkable external surface sorption contribution in the overall sorption.

  2. 49 CFR 173.193 - Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... pounds) water capacity (nominal). This capacity does not apply to shipments of methyl bromide. (c) Methyl... metal cans containing not over one pound each, or inside metal cans with a minimum wall thickness of...

  3. Alkene- and alkyne- substituted methylimidazolium bromides: structural effects and Physical properties (Postprint)

    DTIC Science & Technology

    2007-08-01

    1, 3 - butene - 2 , propargyl- 3 , 2 -butyne- 4, and 2 -pent- yne- 5 side chains and their structural and physical proper- ties have been investigated...pargyl bromide, 2 -butyne bromide, 3 - butene bromide and 2 -pen- tyne bromide), methanol (99.93 % A.C.S. HPLC grade) and diethyl ether (anhydrous, 99...zolium halides (X Cl, Br, I), and 1-( 2 -butyne)- 3 - methyl - imidazolium bromide have been mentioned earlier [20, 21, 2328, 38, 39]. However, detailed

  4. Zinc Bromide Combustion: Implications for the Consolidated Incinerator Facility

    SciTech Connect

    Oji, L.N.

    1998-12-16

    In the nuclear industry, zinc bromide (ZnBr2) is used for radiation shielding. At Savannah River Site (SRS) zinc bromide solution, in appropriate configurations and housings, was used mainly for shielding in viewing windows in nuclear reactor and separation areas. Waste stream feeds that will be incinerated at the CIF will occasionally include zinc bromide solution/gel matrices.The CIF air pollution systems control uses a water-quench and steam atomizer scrubber that collects salts, ash and trace metals in the liquid phase. Water is re-circulated in the quench unit until a predetermined amount of suspended solids or dissolved salts are present. After reaching the threshold limit, "dirty liquid", also called "blowdown", is pumped to a storage tank in preparation for treatment and disposal. The air pollution control system is coupled to a HEPA pre-filter/filter unit, which removes particulate matter from the flue gas stream (1).The objective of this report is to review existing literature data on the stability of zinc bromide (ZnBr2) at CIF operating temperatures (>870 degrees C (1600 degrees F) and determine what the combustion products are in the presence of excess air. The partitioning of the combustion products among the quencher/scrubber solution, bottom ash and stack will also be evaluated. In this report, side reactions between zinc bromide and its combustion products with fuel oil were not taken into consideration.

  5. Methyl bromide: effective pest management tool and environmental threat.

    PubMed

    Thomas, W B

    1996-12-01

    Methyl bromide is used extensively on a global basis as a pesticide against nematodes, weeds, insects, fungi, bacteria, and rodents. As a soil fumigant, it is used in significant quantities in the production of strawberry and tomato, as well as other agriculture commodities. Grain, fresh fruit, forestry products, and other materials are fumigated with methyl bromide to control pest infestations during transport and storage. Structures also are treated with this chemical to control wood-destroying insects and rodents. However, methyl bromide has been identified as a significant ozone-depleting substance, resulting in regulatory actions being taken by the U.S. Environmental Protection Agency and the United Nations Environment Program (Montreal Protocol). The science linking methyl bromide to ozone depletion is strong and was reinforced by the 1994 UNEP Montreal Protocol Science Assessment on Ozone Depletion, which states, "Methyl bromide continues to be viewed as a significant ozone-depleting compound." Identifying efficacious and viable alternatives in the near term is critical.

  6. Cross-coupling of aromatic bromides with allylic silanolate salts.

    PubMed

    Denmark, Scott E; Werner, Nathan S

    2008-12-03

    The sodium salts of allyldimethylsilanol and 2-butenyldimethylsilanol undergo palladium-catalyzed cross-coupling with a wide variety of aryl bromides to afford allylated and crotylated arenes. The coupling of both silanolates required extensive optimization to deliver the expected products in high yields. The reaction of the allyldimethylsilanolate takes place at 85 degrees C in 1,2-dimethoxyethane with allylpalladium chloride dimer (2.5 mol %) to afford 73-95% yields of the allylation products. Both electron-rich and sterically hindered bromides reacted smoothly, whereas electron-poor bromides cross-coupled in poor yield because of a secondary isomerization to the 1-propenyl isomer (and subsequent polymerization). The 2-butenyldimethylsilanolate (E/Z, 80:20) required additional optimization to maximize the formation of the branched (gamma-substitution) product. A remarkable influence of added alkenes (dibenzylideneacetone and norbornadiene) led to good selectivities for electron-rich and electron-poor bromides in 40-83% yields. However, bromides containing coordinating groups (particularly in the ortho position) gave lower, and in one case even reversed, selectivity. Configurationally homogeneous (E)-silanolates gave slightly higher gamma-selectivity than the pure (Z)-silanolates. A unified mechanistic picture involving initial gamma-transmetalation followed by direct reductive elimination or sigma-pi isomerization can rationalize all of the observed trends.

  7. Methyl Bromide: Effective Pest Management Tool and Environmental Threat

    PubMed Central

    Thomas, W. B.

    1996-01-01

    Methyl bromide is used extensively on a global basis as a pesticide against nematodes, weeds, insects, fungi, bacteria, and rodents. As a soil fumigant, it is used in significant quantities in the production of strawberry and tomato, as well as other agriculture commodities. Grain, fresh fruit, forestry products, and other materials are fumigated with methyl bromide to control pest infestations during transport and storage. Structures also are treated with this chemical to control wood-destroying insects and rodents. However, methyl bromide has been identified as a significant ozone-depleting substance, resulting in regulatory actions being taken by the U.S. Environmental Protection Agency and the United Nations Environment Program (Montreal Protocol). The science linking methyl bromide to ozone depletion is strong and was reinforced by the 1994 UNEP Montreal Protocol Science Assessment on Ozone Depletion, which states, "Methyl bromide continues to be viewed as a significant ozone-depleting compound." Identifying efficacious and viable alternatives in the near term is critical. PMID:19277178

  8. Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

    SciTech Connect

    Wang, Wei-Wei; Yao, Jia-Liang

    2010-11-15

    Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

  9. [Tiotropium bromide for treating chronic obstructive pulmonary disease].

    PubMed

    Uteshev, D B; Buniatian, N D; Kovaleva, V L

    2010-11-01

    Five different types of muscarine-sensitive receptors were identified until now. In routine practice, the nonselective antagonist of cholinoreceptors are replaced by ipratropium bromide that is selectively blocking M1, M2, and M3 subtypes with the same affinity to each of them. However, the blockage of M2 subtype leads to bronchoconstriction and is accompanied by inhibition of M3 receptors in bronchial smooth muscles. The new drug tiotropium bromide selectively inhibits only the M1 and M3 types of receptors and does not affect the M2 subtype. This drug is administered only once a day, which is very important in clinical practice. Thus tiotropium bromide is the drug of choice for basic therapy of COPD.

  10. Sodium cromoglycate and ipratropium bromide in exercise-induced asthma.

    PubMed Central

    Thomson, N C; Patel, K R; Kerr, J W

    1978-01-01

    In thirteen patients with extrinsic asthma the effects of placebo, sodium cromoglycate, ipratropium bromide, and ipratropium bromide plus sodium cromoglycate were studied in a random double-blind fashion to assess their inhibitory action in exercise-induced asthma (EIA). Exercise testing consisted of steady state running on an inclined treadmill for up to eight minutes. In eight of the 13 patients studied the baseline ratio of expiratory flow at 50% vital capacity (VC) breathing helium-oxygen (V50He) to V50air was over 1.20 and they were called responders; the remaining five patients were called non-responders. There was a significantly lower baseline maximum mid-expiratory flow rate (MMEF) in non-responders (P less than 0.02) as compared to responders but no difference in forced expiratory volume in one second (FEV1) or forced vital capacity (FVC). Sodium cromoglycate (P less than 0.02), ipratropium bromide (P less than 0.01), and ipratropium bromide plus spdium cromoglycate (P less than 0.01) all significantly inhibited the percentage fall in FEV1 after exercise in the responders. Ipratropium bromide had no preventive action on non-responders, unlike sodium cromoglycate (P less than 0.05) and ipratropium bromide plus sodium cromoglycate (P less than 0.02). It is postulated that mediator release is an important factor in development of EIA in most extrinsic asthmatics, whereas cholinergic mechanisms are relevant only in those patients in whom the main site of airflow obstruction is in the large central airways. PMID:154747

  11. Photochemistry of alkyl bromides trapped in water ice films

    NASA Astrophysics Data System (ADS)

    Schrems, O.; Okaikwei, B.; Bluszcz, Th.

    2012-04-01

    Photochemical reactions of atmospheric trace gases taking place at the surface of atmospheric ice particles and in bulk ice are important in stratospheric and tropospheric chemistry but also in polar and alpine snowpack chemistry. Consequently, the understanding of the uptake und incorporation of atmospheric trace gases in water ice as well as their interactions with water molecules is very important for the understanding of processes which occur in ice particles and at the air/ice interface. Reactive atmospheric trace gases trapped in ice are subject of photochemical reactions when irradiated with solar UV radiation. Among such compounds bromine species are highly interesting due to their potential of depleting ozone both in the stratosphere and troposphere. Organic bromine gases can carry bromine to the stratosphere. Methyl bromide (CH3Br) is the largest bromine carrier to the stratosphere. It has both natural and anthropogenic sources. In this contribution we will present the results of our laboratory studies of alkyl bromides (methyl, bromide (CH3Br), dimethyl bromide (CH2Br2), n-propyl bromide (C3H7Br), 1,2-dibromoethane C2H4Br2)), trapped in water ice. We have simulated the UV photochemistry of these brominated alkanes isolated in ice films kept at 16 K and for comparison in solid argon matrices. The photoproducts formed in the ice have been identified by means of FTIR spectroscopy. Reflection absorption infrared spectroscopy (RAIRS) is especially useful to study nascent ice surfaces, kinetics of adsorption/decomposition, and heterogeneous catalysis. Among the observed photoproducts we could identify carbon monoxide and carbon dioxide for each alkyl bromide studied. The photoproduct HBr is dissociated in the bulk ice. Based on the experimental observations possible reaction mechanisms will be discussed.

  12. Chemical alternatives to methyl bromide for Florida ornamental production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This project is a cooperative effort among USDA, ARS and University of Florida researchers, Florida in-ground ornamental producers, and fumigant industry representatives. Funding is provided through the USDA-ARS Area-wide Pest Management Program for Alternatives to Methyl Bromide. The ornamental i...

  13. Status of Alternatives for Methyl Bromide in the United States

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is a fumigant used for disinfestation of soils, commodities and structures. Listed as an ozone-depleting chemical international environmental protocols and the U.S. Clean Air Act require that its use be severely restricted. Although use of this fumigant has fallen considerably, the U....

  14. EFFECT OF BROMIDE ION ON FORMATION OF HAAS DURING CHLORINATION

    EPA Science Inventory

    loacetic acids (HAAs) during chlorination and he effects of independent variables, including pH, reaction time, and chlorine dosage. Almost all of the indpendent loaetic acids (HAAs) during chlorin...designed to statistically evaluate the influence of bromide ion on the formatio...

  15. Depleting methyl bromide residues in soil by reaction with bases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Despite generally being considered the most effective soil fumigant, methyl bromide (MeBr) use is being phased out because its emissions from soil can lead to stratospheric ozone depletion. However, a large amount is still currently used due to Critical Use Exemptions. As strategies for reducing the...

  16. REVIEW OF CONTROL OPTIONS FOR METHYL BROMIDE IN COMMODITY TREATMENT

    EPA Science Inventory

    The report describes recent developments in the control of methyl bromide (MeBr) and discusses technical considerations and requirements for and economic feasibility of recovery. (NOTE: MeBr, fumigant for agricultural commodities, is an ozone depleting chemical. The U.S. EPA has ...

  17. Evaluation of the Efficacy of Methyl Bromide in the ...

    EPA Pesticide Factsheets

    Journal Article The objective of this article is to determine the required conditions for the effective inactivation of Bacillus anthracis (B.a.) spores on materials using methyl bromide (MeBr) and to obtain comparative efficacy data with three avirulent microorganisms, to assess their potential as surrogates for B.a. Ames.

  18. The Fate of Alternative Soil Funigants to Methyl Bromide

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soil fumigation is an important agricultural practice for the control of soil-borne pests. Since the phase–out of methyl bromide, due to its role in the depletion of stratospheric ozone, several alternatives such as 1,3-dichloropropene (1,3-D), chloropicrin (CP), and dimethyl disulfide (DMDS) are b...

  19. Ipratropium bromide spray as treatment for sialorrhea in Parkinson's disease.

    PubMed

    Thomsen, Teri R; Galpern, Wendy R; Asante, Abena; Arenovich, Tamara; Fox, Susan H

    2007-11-15

    Sialorrhea is a significant problem in advanced Parkinson's disease (PD). Current treatment options include systemic anticholinergics which frequently cause side effects. We hypothesized that sublingual application of ipratropium bromide spray, an anticholinergic agent that does not cross the blood brain barrier, may reduce drooling without systemic side effects. We performed a randomized, double blind, placebo-controlled, crossover study in 17 subjects with PD and bothersome drooling. Patients were randomized to receive ipratropium bromide or placebo (one to two sprays, maximum of four times per day) for 2 weeks followed by a 1 week washout and crossover for further 2 weeks of treatment. The primary outcome was an objective measure of weight of saliva production. Secondary outcomes were subjective rating of severity and frequency of sialorrhoea using home diaries, United Parkinson's Disease Rating Scale (UPDRS) part II salivation subscore, parkinsonian disability using UPDRS, and adverse events. Ipratropium bromide spray had no significant effect on weight of saliva produced. There was a mild effect of treatment on subjective measures of sialorrhea. There were no significant adverse events. Ipratropium bromide spray was well tolerated in subjects with PD. Although it did not affect objective measures of saliva production, further studies in parkinsonism may be warranted.

  20. Actual hazard of methyl bromide fumigation in soil disinfection.

    PubMed Central

    Van Den Oever, R U; Roosels, D; Lahaye, D

    1982-01-01

    Methyl bromide, a highly toxic and ready penetrating fumigant, is widely used against rodents, insects, mites, and a range of pathogenic organisms in soil, compost, and timber. To disinfect soil in greenhouses, methyl bromide is brought under pressure from outside by a vaporiser and blown on to ground under a polyethylene cover. The gas being three times heavier than air easily penetrates the ground. Depending on the local ventilation, a considerable amount of gas evaporates into the surrounding atmosphere, this emission being especially serious during the fumigation procedure and at the removal of the plastic cover. Previously, mechanical injection of methyl bromide on to the ground within closed areas was prohibited, since this technique exposed at least four disinfection workers at a time, who were provided with only a canister respirator, to gas concentrations of over 1000 ppm CH3Br. The present study established that fumigation with methyl bromide also carries risks for the well-protected worker inside, as well as for the one controlling the vaporiser. The concentration during application varies from 30 to 3000 ppm. Concentration in the air declines with time to 4 ppm CH3Br five days after application. Discarding the plastic sheet involves exposure to peak values as high as 200 ppm for a few seconds. On the ninth day after application, milling the soil can expose workers to up to 15 ppm; on the eleventh day no CH3Br concentration in the air could be found. PMID:7066229

  1. Bromide ion effect on N-nitrosodimethylamine formation by monochloramine.

    PubMed

    Luh, Jeanne; Mariñas, Benito J

    2012-05-01

    N-Nitrosodimethylamine (NDMA) formation experiments conducted in phosphate buffer demonstrated that in waters containing monochloramine, the presence of bromide ion enhanced NDMA formation at the relatively high pH values of 8 and 9 after 24 h of reaction time, which was consistent with literature results. However, at relatively low to neutral pH (6 to 7), the presence of bromide resulted in lower NDMA formation as compared to results obtained in the absence of bromide. The hypothesis that bromamines were the species directly responsible for enhanced NDMA formation at high pH was tested and was shown not to be valid. Additional active bromine species were also tested, including hypobromous acid, hypobromite ion, and tribromide ion, with no species showing an ability to directly enhance NDMA formation. Analysis of the UV spectral data corresponding to the NDMA experiments suggest that the mechanism by which bromide enhances NDMA formation lies in the formation of a haloamine compound, possibly the mixed dihaloamine bromochloramine.

  2. Reactive films for mitigating methyl bromide emissions from fumigated soil

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Emissions of methyl bromide (MeBr) from agricultural fumigation can lead to depletion of the stratospheric ozone layer, and so its use is being phased out. However, as MeBr is still widely used under Critical Use Exemptions, strategies are still required to control such emissions. In this work, nove...

  3. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  4. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  5. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  6. 21 CFR 522.275 - N-Butylscopolammonium bromide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522.275 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS §...

  7. On the existence of ‘L-alanine cadmium bromide'

    NASA Astrophysics Data System (ADS)

    Srinivasan, Bikshandarkoil R.

    2013-12-01

    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  8. On the existence of 'L-alanine cadmium bromide'.

    PubMed

    Srinivasan, Bikshandarkoil R

    2013-12-01

    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  9. 75 FR 5582 - Methyl Bromide; Amendments to Terminate Uses

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-03

    ... or on alfalfa hay and cottonseed for these product registrations. These are the last products containing the pesticide methyl bromide registered for use on alfalfa hay and cotton seed in the United... post-harvest alfalfa hay and post-harvest cottonseed uses is prohibited after October 31, 2009,...

  10. Methyl bromide phase out could affect future reforestation efforts

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide has long been an integral component in producing healthy tree seedlings in forest nurseries of California, Idaho, Montana, Oregon and Washington. The fumigant was supposed to be completely phased out of use in the United States of America by 2005, but many forest nurseries continue to...

  11. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  12. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  13. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  14. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of... None Pumpkin, postharvest 20.0 None Quince, postharvest 5.0 None Radish, postharvest 30.0 None Rice..., postharvest 20.0 None Turnip, roots, postharvest 30.0 None Walnut, postharvest 200.0 None...

  15. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... fumigated with the antimicrobial agent and insecticide methyl bromide after harvest (with the exception of..., postharvest 5.0 Radish, postharvest 30.0 Rice, grain, postharvest 50.0 Rutabaga, roots, postharvest 30.0..., roots, postharvest 30.0 Walnut, postharvest 200.0 Watermelon, postharvest 20.0 Wheat 50.0 (2)...

  16. Heat capacities of the water + lithium bromide + ethanolamine and water + lithium bromide + 1,3-propanediol systems

    SciTech Connect

    Kim, J.S.; Park, Y.; Lee, H.; Yu, S.I.

    1997-03-01

    Heat capacities of the water + lithium bromide + ethanolamine (LiBr/H{sub 2}N(CH{sub 2}){sub 2}OH mass ratio = 3.5) and water + lithium bromide + 1,3-propanediol (LiBr/HO(CH{sub 2}){sub 3}OH mass ratio = 3.5) systems were measured by using an isoperibol solution calorimeter at four temperatures (283.15, 298.15, 313.15, and 333.15 K) and absorbent (LiBr + H{sub 2}N(CH{sub 2}){sub 2}OH and LiBr + HO(CH{sub 2}){sub 3}OH) concentration ranges of (29.2 to 70.7)% and (30.7 to 68.3)%, respectively. The measured values were fitted with a simple equation by a least-squares method and the average absolute deviations between experimental and calculated values were 0.21% for the water + lithium bromide + ethanolamine system and 0.15% for the water + lithium bromide + 1,3-propanediol system, respectively.

  17. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  18. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  19. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  20. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  1. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  2. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  3. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  4. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  5. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  6. 40 CFR 721.4090 - Ethanaminium, N-[bis(diethylamino)-methylene]-N-ethyl-, bromide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ethanaminium, N- -N-ethyl-, bromide... Substances § 721.4090 Ethanaminium, N- -N-ethyl-, bromide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as ethanaminium, N- -N-ethyl-, bromide (PMN...

  7. Uptake of ozone to mixed sodium bromide/ citric acid solutions

    NASA Astrophysics Data System (ADS)

    Lee, Ming-Tao; Steimle, Emilie; Bartels-Rausch, Thorsten; Kato, Shunsuke; Lampimäki, Markus; Brown, Matthew; van Bokhoven, Jeroen; Nolting, Frithjof; Kleibert, Armin; Türler, Andreas; Ammann, Markus

    2013-04-01

    Sea-salt solution - air interfaces play an important role in the chemistry of the marine boundary layer. The reaction of ozone (O3) with bromide is of interest in the context of formation of photolabile halogens (Br2, BrCl) in the marine boundary layer. Recent experiments have suggested that the bromide oxidation rate is related to the surface concentration of bromide [1] and inversely related to the gas phase concentration of O3, an indication for a precursor mediated reaction at the surface [2]. So far, the effect of organics (such as those occurring at the ocean surface or in marine aerosols) on the reaction of O3 with bromide aerosols has not been studied yet. In our study we investigate the uptake kinetics of O3 to a mixed solution of sodium bromide (NaBr) and citric acid (CA), which represents highly oxidized organic compounds present in the environment, with a well-established coated wall flow tube technique, which leads to exposure of the film to O3 allowing the heterogeneous reactions to take place and the loss of O3 being measured. The results indicate that the uptake of O3 to the films with the higher bromide concentrations (0.34M and 4M) is independent of the gas phase concentration and roughly consistent with uptake limited by reaction in the bulk. For the lower bromide concentration (84mM), however, we observe a trend of the uptake coefficient to decrease with increasing O3 concentration, indicating an increasing importance of a surface reaction. In an attempt to constrain the kinetic data, we employed X-ray photoelectron spectroscopy (XPS) to get insight into the surface composition of the aqueous solution - air interface. Previous XPS studies have shown that halide ion concentrations are enhanced at the aqueous solution air interface [3-4], which likely promotes the surface reactions of bromide or iodide with O3. A first XPS study of ternary solutions of KI with butanol indicated the importance of specific interactions of the cation with the alcohol

  8. Noncovalent approach to one-dimensional ion conductors: enhancement of ionic conductivities in nanostructured columnar liquid crystals.

    PubMed

    Shimura, Harutoki; Yoshio, Masafumi; Hoshino, Koji; Mukai, Tomohiro; Ohno, Hiroyuki; Kato, Takashi

    2008-02-06

    Noncovalent design of new liquid-crystalline (LC) columnar assemblies based on an ionic liquid has shown to be useful to achieve anisotropic high ionic conductivities. An equimolar mixture of an ionic liquid, 1-butyl-3-methylimidazolium bromide, and 3-[3,4,5-tri(octyloxy)benzoyloxy]propane-1,2-diol, which is partially miscible with the ionic liquid, exhibits an LC hexagonal columnar phase from -4 to 63 degrees C. This columnar supramolecular assembly forming the nanostructures shows the one-dimensional (1D) ionic conductivity of 3.9 x 10(-3) S cm(-1) at 50 degrees C along the column, which is more than 700 times higher than that of the corresponding covalent-type columnar ionic liquid, 1-methyl-3-[3,4,5-tri(octyloxy)benzyl]imidazolium bromide, which is 5.3 x 10(-6) S cm(-1) at 50 degrees C. This significant enhancement of the ionic conductivity is attributed to the increase of the mobility of the ionic part.

  9. Ionic liquid biodegradability depends on specific wastewater microbial consortia.

    PubMed

    Docherty, Kathryn M; Aiello, Steven W; Buehler, Barbara K; Jones, Stuart E; Szymczyna, Blair R; Walker, Katherine A

    2015-10-01

    Complete biodegradation of a newly-synthesized chemical in a wastewater treatment plant (WWTP) eliminates the potential for novel environmental pollutants. However, differences within- and between-WWTP microbial communities may alter expectations for biodegradation. WWTP communities can also serve as a source of unique consortia that, when enriched, can metabolize chemicals that tend to resist degradation, but are otherwise promising green alternatives. We tested the biodegradability of three ionic liquids (ILs): 1-octyl-3-methylpyridinium bromide (OMP), 1-butyl-3-methylpyridinium bromide (BMP) and 1-butyl-3-methylimidazolium chloride (BMIM). We performed tests using communities from two WWTPs at three time points. Site-specific and temporal variation both influenced community composition, which impacted the success of OMP biodegradability. Neither BMP nor BMIM degraded in any test, suggesting that these ILs are unlikely to be removed by traditional treatment. Following standard biodegradation assays, we enriched for three consortia that were capable of quickly degrading OMP, BMP and BMIM. Our results indicate WWTPs are not functionally redundant with regard to biodegradation of specific ionic liquids. However, consortia can be enriched to degrade chemicals that fail biodegradability assays. This information can be used to prepare pre-treatment procedures and prevent environmental release of novel pollutants.

  10. Study of ferroelectric characteristics of diisopropylammonium bromide films

    NASA Astrophysics Data System (ADS)

    Thirmal, C.; Biswas, P. P.; Shin, Y. J.; Noh, T. W.; Giridharan, N. V.; Venimadhav, A.; Murugavel, P.

    2016-09-01

    Organic molecular ferroelectrics are highly desirable due to their numerous advantages. In the present work, a thick film of diisopropylammonium bromide organic molecular ferroelectric is fabricated on the ITO/glass substrate. The grown film shows preferential orientation along the c-axis with a ferroelectric transition at 419 K. The piezoresponse force microscopic measurements are done in a dual ac resonance tracking mode for its switching characteristics. The amplitude and phase images of the oppositely written domain patterns exhibit a clear contrast with 180° phase difference. The dynamical spectroscopic studies reveal a butterfly loop in amplitude and hysteretic character of the phase which are the expected characteristics features of ferroelectrics. In addition, the macroscopic polarization versus electric field hysteresis gives an additional proof for ferroelectric character of the film with the maximum polarization of 3.5 μC/cm2. Overall, we have successfully fabricated diisopropylammonium bromide organic films and demonstrated its room temperature ferroelectric characteristics.

  11. A novel and robust conditioning lesion induced by ethidium bromide

    PubMed Central

    Hollis, Edmund R; Ishiko, Nao; Tolentino, Kristine; Doherty, Ernest; Rodriguez, Maria J.; Calcutt, Nigel A.; Zou, Yimin

    2015-01-01

    Molecular and cellular mechanisms underlying the peripheral conditioning lesion remain unsolved. We show here that injection of a chemical demyelinating agent, ethidium bromide, into the sciatic nerve induces a similar set of regeneration-associated genes and promotes a 2.7-fold greater extent of sensory axon regeneration in the spinal cord than sciatic nerve crush. We found that more severe peripheral demyelination correlates with more severe functional and electrophysiological deficits, but more robust central regeneration. Ethidium bromide injection does not activate macrophages at the demyelinated sciatic nerve site, as observed after nerve crush, but briefly activates macrophages in the dorsal root ganglion. This study provides a new method for investigating the underlying mechanisms of the conditioning response and suggests that loss of the peripheral myelin may be a major signal to change the intrinsic growth state of adult sensory neurons and promote regeneration. PMID:25541322

  12. Thermal stability of octadecyltrimethylammonium bromide modified montmorillonite organoclay.

    PubMed

    Xi, Yunfei; Zhou, Qin; Frost, Ray L; He, Hongping

    2007-07-15

    Organoclays are significant for providing a mechanism for the adsorption of organic molecules from potable water. As such their thermal stability is important. A combination of thermogravimetric analysis and infrared emission spectroscopy was used to determine this stability. Infrared emission spectroscopy (IES) was used to investigate the changes in the structure and surface characteristics of water and surfactant molecules in montmorillonite, octadecyltrimethylammonium bromide and organoclays prepared with the surfactant octadecyltrimethylammonium bromide with different surfactant loadings. These spectra collected at different temperatures give support to the results obtained from the thermal analysis and also provide additional evidence for the dehydration which is difficult to obtain by normal thermoanalytical techniques. The spectra provide information on the conformation of the surfactant molecules in the clay layers and the thermal decomposition of the organoclays. Infrared emission spectroscopy proved to be a useful tool for the study of the thermal stability of the organoclays.

  13. Aluminium Electroplating on Steel from a Fused Bromide Electrolyte

    SciTech Connect

    Prabhat Tripathy; Laura Wurth; Eric Dufek; Toni Y. Gutknecht; Natalie Gese; Paula Hahn; Steven Frank; Guy Fredrickson; J Stephen Herring

    2014-08-01

    A quaternary bromide bath (LiBr-KBr-CsBr-AlBr3) was used to electro-coat aluminium on steel substrates. The electrolyte was prepared by the addition of AlBr3 into the eutectic LiBr-KBr-CsBr melt. A smooth, thick, adherent and shiny aluminium coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminium coverage. Both salt immersion and open circuit potential measurement suggest that the coatings did display good corrosion-resistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminium coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminium coating on both ferrous and non-ferrous metals, including complex surfaces/geometries.

  14. Aluminum electroplating on steel from a fused bromide electrolyte

    SciTech Connect

    Prabhat K. Tripathy; Laura A. Wurth; Eric J. Dufek; Toni Y. Gutknecht; Natalie J. Gese; Paula Hahn; Steven M. Frank; Guy L. Frederickson; J. Stephen Herring

    2014-08-01

    A quaternary bromide bath (LiBr–KBr–CsBr–AlBr3) was used to electro-coat aluminum on steel substrates. The electrolytewas prepared by the addition of AlBr3 into the eutectic LiBr–KBr–CsBr melt. A smooth, thick, adherent and shiny aluminum coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminum coverage. Both salt immersion and open circuit potential measurement suggested that the coatings did display a good corrosionresistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminum coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminumcoating on both ferrous and non-ferrous metals, including complex surfaces/geometries.

  15. [The compatibility between packing material and ipratropium bromide aerosol].

    PubMed

    Yue, Zhi-hua; Shen, Dian-dian; Hu, Chang-qin

    2010-08-01

    With the establishment of HPLC and LC-MS methods to determine the related substances and the content of active pharmaceutical ingredient (API) in ipratropium bromide aerosol products, several packing material-related impurities were identified, including antioxygen BHT and antioxygen 2246. Results showed that these leachable additives from the packing materials may present at a relative high level in the drug solution, and the low content of API in the drug products is usually due to the adsorption of the packing material as well as the leaking of contents. The current available assay methods for the control of ipratropium bromide aerosol products are often lack of specificity and unable to assure the drug quality effectively. To meet the increasing attention on the regulations of drug packing materials, our research would be a pilot study, indicating that the inappropriate packing materials could cause the migration and adsorption of the active ingredients, and the importance to have compatibility studies between packing materials and drugs.

  16. Effect of bromide and nitrite on the degradation of monochloramine

    SciTech Connect

    Valentine, R.L.; Selleck, R.E.

    1981-10-01

    The results indicate that relatively small concentrations of nitrite can greatly accelerate the degradation of monochloramine in the presence of bromide. It does not appear that nitrite is being significantly consumed in a 1:1 stoichiometric oxidation by monochloramine. If the effect of nitrite is catalytic then these results suggest that the presence of nitrite may also accelerate other oxidation-reduction reactions. For example, nitrite may play an important role in oxidant decay in partially nitrified sewage effluents where both monochloramine and nitrite may be present. If not a complex oxidation-reduction possibly involving bromide as a catalyst is indicated. The results also suggest that the presence of other potentially oxidizable species may affect oxidant decay in a manner not attributable to a simple parallel oxidation.

  17. A Lithium Bromide Absorption Chiller with Cold Storage

    DTIC Science & Technology

    2011-01-15

    TO R A G E A LITHIUM BROMIDE ABSORPTION CHILLER WITH COLD STORAGE William Gerstler, et al, General Electric Global Research UNCLASSIFIED UNLIMITED...Research ABSTRACT A LiBr-based absorption chiller can use waste heat or solar energy to produce useful space cooling for small buildings...However, operating this absorption chiller at high ambient tem- peratures may result in performance degradation, crystallization in the absorber, and

  18. Conservative tracer bromide inhibits pesticide mineralisation in soil.

    PubMed

    Bech, Tina B; Rosenbom, Annette E; Sørensen, Sebastian R; Jacobsen, Carsten S

    2017-03-01

    Bromide is a conservative tracer that is often applied with non-conservative solutes such as pesticides to estimate their retardation in the soil. It has been applied in concentrations of up to 250 g Br L(-1), levels at which the growth of single-celled organisms can be inhibited. Bromide applications may therefore affect the biodegradation of non-conservative solutes in soil. The present study investigated the effect of potassium bromide (KBr) on the mineralisation of three pesticides - glyphosate, MCPA and metribuzin - in four agricultural A-horizon soils. KBr was added to soil microcosms at concentrations of 0, 0.5, 2.5 and 5 g Br(-) L(-1) in the soil solution. The study concluded that KBr had a negative effect on pesticide mineralisation. The inhibitory effect varied depending on the KBr concentration, the type of pesticide and the type of soil. Furthermore, 16 S amplicon sequencing revealed that the KBr treatment generally reduced the abundance of bacteroidetes and proteobacteria on both an RNA and DNA level. Therefore, in order to reduce the effect of KBr on the soil bacterial community and consequently also on xenobiotic degradation, it is recommended that KBr be applied in a concentration that does not exceed 0.5 g Br(-) L(-1) in the soil water.

  19. The Thz Absorption of Methyl Bromide (CH_3BR)

    NASA Astrophysics Data System (ADS)

    Ramos, Marlon; Drouin, Brian J.

    2011-06-01

    The possibility of monitoring Methyl Bromide is of interest for both environmental and health concerns. It has an ozone depletion potential of 0.2% and falls under regulations of the Clean Air Act. Neurological effects from long term exposure may result from its major use as a pesticide. Recent improvements in microwave limb sounding at mm & submm wavelengths have resulted in retrievals of Methyl Chloride from atmospheric spectra. It is conceivable that Methyl Bromide would also be measurable by this technique. In an effort to extend and improve the previous work, the THz spectrum of Methyl Bromide has been measured at JPL. We used an isotopically enriched 13CH_3Br (90%) sample and recorded spectra from 750 - 1200 GHz. Our assignment covers the CH_379Br, CH_381Br, 13CH_379Br and 13CH_381Br isotopologues with J< 66 and K< 17 for the ground vibrational state. We plan to assign vibrational satellites and investigate possible perturbations near K =12 in the ground state.

  20. Tiotropium Bromide in Chronic Obstructive Pulmonary Disease and Bronchial Asthma.

    PubMed

    Alvarado-Gonzalez, Alcibey; Arce, Isabel

    2015-11-01

    Inhaled bronchodilators are the mainstay of pharmacological treatment for stable chronic obstructive pulmonary disease (COPD), including β2-agonists and muscarinic antagonists. Tiotropium bromide, a long-acting antimuscarinic bronchodilator (LAMA), is a treatment choice for moderate-to-severe COPD; its efficacy and safety have been demonstrated in recent trials. Studies also point to a beneficial role of tiotropium in the treatment of difficult-to-control asthma and a potential function in the asthma-COPD overlap syndrome (ACOS). Combination of different bronchodilator molecules and addition of inhaled corticosteroids are viable therapeutic alternatives. A condensation of the latest trials and the rationale behind these therapies will be presented in this article.

  1. Induced Adsorption of Chloride and Bromide by Submonolayer Amounts of Copper Underpotentially Deposited on Pt(111)

    DTIC Science & Technology

    1994-03-14

    S GD Induced Adsorption Of Chloride And Bromide By Submonolayer Amounts Of Copper Underpotentially Deposited On Pt(111). R. G6mez, J.M. Feliu, and...The underpotential deposition of submonolayer amounts of copper induces an enhanced adsorption of chloride and bromide on Pt(111) and is reflected in...nhinoItO _. •- Induced Adsorption of Chloride and Bromide by Submonolayer Amounts of Copper Underpotentially Deposited on Pt(1 11). R. G6mez1 , J.M

  2. Mixed Iodide-Bromide Methylammonium Lead Perovskite-based Diodes for Light Emission and Photovoltaics.

    PubMed

    Gil-Escrig, Lidón; Miquel-Sempere, Araceli; Sessolo, Michele; Bolink, Henk J

    2015-09-17

    Vacuum deposition techniques are used to prepare mixed iodide-bromide methylammonium lead perovskite diodes via an intermediate double layer of the pure iodide and bromide perovskites. The diodes lead to bright electroluminescence, whose emission spectra maxima shift from the infrared toward the visible with increasing bromide content. When illuminated with AM1.5 simulated sunlight the devices function as efficient solar cells with power conversion efficiencies as high as 12.9%.

  3. Ionic liquid and aqueous two-phase extraction based on salting-out coupled with high-performance liquid chromatography for the determination of seven rare ginsenosides in Xue-Sai-Tong injection.

    PubMed

    Li, Lan-Jie; Jin, Yong-Ri; Wang, Xiao-Zhong; Liu, Ying; Wu, Qian; Shi, Xiao-Lei; Li, Xu-Wen

    2015-09-01

    A method of ionic liquid salt aqueous two-phase extraction coupled with high-performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg6 , F4 , 20(S)-Rg3 , 20(R)-Rg3 , Rk3 , Rk1 , and Rg5 in Xue-Sai-Tong injection. The injection was mixed with ionic liquid 1-butyl-3-methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two-phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue-Sai-Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.

  4. Choline chloride-thiourea, a deep eutectic solvent for the production of chitin nanofibers.

    PubMed

    Mukesh, Chandrakant; Mondal, Dibyendu; Sharma, Mukesh; Prasad, Kamalesh

    2014-03-15

    Deep eutectic solvents (DESs) consisting of the mixtures of choline halide (chloride/bromide)-urea and choline chloride-thiourea were used as solvents to prepare α-chitin nanofibers (CNFs). CNFs of diameter 20-30 nm could be obtained using the DESs comprising of the mixture of choline chloride and thiourea (CCT 1:2); however, NFs could not be obtained using the DESs having urea (CCU 1:2) as hydrogen bond donor. The physicochemical properties of thus obtained NFs were compared with those obtained using a couple of imidazolium based ionic liquids namely, 1-butyl-3-methylimidazolium hydrogen sulphate [(Bmim)HSO4] and 1-methylimidazolium hydrogen sulphate [(Hmim)HSO4] as well as choline based bio-ILs namely, choline hydrogen sulphate [(Chol)HSO4] and choline acrylate. The CNFs obtained using the DES as a solvent were used to prepare calcium alginate bio-nanocomposite gel beads having enhanced elasticity in comparison to Ca-alginate beads. The bio-nanocomposite gel beads thus obtained were used to study slow release of 5-fluorouracil, an anticancer drug.

  5. Development of an ionic liquid-based microwave-assisted method for simultaneous extraction and distillation for determination of proanthocyanidins and essential oil in Cortex cinnamomi.

    PubMed

    Liu, Ye; Yang, Lei; Zu, Yuangang; Zhao, Chunjian; Zhang, Lin; Zhang, Ying; Zhang, Zhonghua; Wang, Wenjie

    2012-12-15

    Cortex cinnamomi is associated with many health benefits and is used in the food and pharmaceutical industries. In this study, an efficient ionic liquid-based microwave-assisted simultaneous extraction and distillation (ILMSED) technique was used to extract cassia oil and proanthocyanidins from Cortex cinnamomi; these were quantified by gas chromatography/mass spectrometry (GC-MS) and the vanillin-HCl colorimetric method, respectively. 0.5M 1-butyl-3-methylimidazolium bromide ionic liquid was selected as solvent. The optimum parameters of dealing with 20.0 g sample were 230 W microwave irradiation power, 15 min microwave extraction time and 10 liquid-solid ratio. The yields of essential oil and proanthocyanidins were 1.24 ± 0.04% and 4.58 ± 0.21% under the optimum conditions. The composition of the essential oil was analysed by GC-MS. Using the ILMSED method, the energy consumption was reduced and the extraction yields were improved. The proposed method was validated using stability, repeatability, and recovery experiments. The results indicated that the developed ILMSED method provided a good alternative for the extraction of both the essential oil and proanthocyanidins from Cortex cinnamomi.

  6. Structural and Dielectric Properties of Ionic Liquid Doped Metal Organic Framework based Polymer Electrolyte Nanocomposites

    NASA Astrophysics Data System (ADS)

    Dutta, Rituraj; Kumar, Ashok

    2016-10-01

    Metal Organic Frameworks (MOFs) are mesoporous materials that can be treated as potential hosts for trapping guest molecules in their pores. Ion conduction and phase behavior dynamics of Ionic Liquids (ILs) can be controlled by tunable interactions of MOFs with the ILs. MOFs incorporated with ionic liquid can be dispersed in the polymers to synthesize polymer electrolyte nanocomposites with high ionic conductivity, electrochemical and thermal stability for applications in energy storage and conversion devices such as rechargeable Li-ion batteries. In the present work we have synthesized Cu-based MOF [Cu3(l,3,5-benzene tricarboxylate)2(H2O)] incorporated with the ionic liquid 1-Butyl-3-methylimidazolium bromide at different weight ratios of MOF and IL. The synthesized MOF-IL composites are dispersed in Poly (ethylene oxide) (PEO). Frequency dependent behavior of permittivity and dielectric loss of the nanocomposites depict the non-Debye dielectric relaxation mechanism. The room temperature Nyquist plots reveal decreasing bulk resistance upto 189 Ω with optimum ionic conductivity of 1.3×10-3S cm-1at maximum doping concentration of IL in the nanocomposite system.

  7. Optimization of Ionic Liquid Based Simultaneous Ultrasonic- and Microwave-Assisted Extraction of Rutin and Quercetin from Leaves of Velvetleaf (Abutilon theophrasti) by Response Surface Methodology

    PubMed Central

    Zhao, Chunjian; Lu, Zhicheng; He, Xin; Li, Zhao; Shi, Kunming; Yang, Lei; Fu, Yujie; Zu, Yuangang

    2014-01-01

    An ionic liquids based simultaneous ultrasonic and microwave assisted extraction (ILs-UMAE) method has been proposed for the extraction of rutin (RU), quercetin (QU), from velvetleaf leaves. The influential parameters of the ILs-UMAE were optimized by the single factor and the central composite design (CCD) experiments. A 2.00 M 1-butyl-3-methylimidazolium bromide ([C4mim]Br) was used as the experimental ionic liquid, extraction temperature 60°C, extraction time 12 min, liquid-solid ratio 32 mL/g, microwave power of 534 W, and a fixed ultrasonic power of 50 W. Compared to conventional heating reflux extraction (HRE), the RU and QU extraction yields obtained by ILs-UMAE were, respectively, 5.49 mg/g and 0.27 mg/g, which increased, respectively, 2.01-fold and 2.34-fold with the recoveries that were in the range of 97.62–102.36% for RU and 97.33–102.21% for QU with RSDs lower than 3.2% under the optimized UMAE conditions. In addition, the shorter extraction time was used in ILs-UMAE, compared with HRE. Therefore, ILs-UMAE was a rapid and an efficient method for the extraction of RU and QU from the leaves of velvetleaf. PMID:25243207

  8. Comparison of Heat and Bromide as Tracers of Stream Exchanges With Shallow Ground Water

    NASA Astrophysics Data System (ADS)

    Constantz, J.; Cox, M. H.; Su, G. W.

    2002-12-01

    Heat and bromide were compared as tracers for examining stream/groundwater exchanges along the middle reaches of the Santa Clara River, CA, during a 10-hour surface-water sodium bromide injection. Three cross-sections comprised of 6 shallow (1 m) piezometers were installed at the upper, middle, and lower sections of a 17 km long study reach to monitor temperatures and bromide concentrations in the shallow ground water beneath the stream. The heat and ground-water transport simulation model, VS2DH, and a closely related solute and ground-water transport simulation model, VS2DT, were matched up for comparison of simulated and observed temperatures and bromide concentrations in the streambed. Simulated sediment temperature were fitted to observed temperature results to yield apparent streambed hydraulic conductivities in each cross-section. Saturated hydraulic conductivities ranged from 1.39 x 10-5 m/s in the upper reach to 5.56 x 10-4 m/s in the lower reach. The temperature-based hydraulic conductivities were inserted into VS2DT to predict sediment bromide concentrations during the sodium bromide injection. The predicted bromide concentration curves in the sediments yielded an excellent match to the observed bromide concentrations, without adjustment of any model parameters. This indicates that for the spatial and temporal scales examined on the Santa Clara River, the use of heat and bromide as tracers provide comparable information with respect to apparent hydraulic conductivities and water fluxes in near-stream environments.

  9. Transient neuromyopathy after bromide intoxication in a dog with idiopathic epilepsy

    PubMed Central

    2012-01-01

    A seven-year old Australian Shepherd, suffering from idiopathic epilepsy under treatment with phenobarbitone and potassium bromide, was presented with generalised lower motor neuron signs. Electrophysiology and muscle-nerve biopsies revealed a neuromyopathy. The serum bromide concentration was increased more than two-fold above the upper reference value. Clinical signs disappeared after applying diuretics and reducing the potassium bromide dose rate. This is the first case report describing electrophysiological and histopathological findings associated with bromide induced lower motor neuron dysfunction in a dog. PMID:23216950

  10. Solubilities of bromide salts of aluminum, cobalt, lead, manganese, potassium, and sodium when sparged with hydrogen bromide

    SciTech Connect

    Noble, E.G.; Shanks, D.E.

    1988-01-01

    The effects of HBr concentration and temperature on the solubility and hydration state of AlBr/sub 3/, CoBr/sub 2/, PbBr/sub 2/, MnBr/sub 2/, KBr, and NaBr were investigated by the Bureau of Mines. Saturated aqueous solutions of the Al, Pb, K, and Na bromides were sparged with HBr gas at 20/sup 0/, 40/sup 0/, and 60/sup 0/C, and saturated solutions of Co and Mn bromides were sparged at 20/sup 0/C. Increased HBr concentration caused decreased salt solubility because of the common ion effect for all the investigated bromides except PbBr/sub 2/. Aqueous solubilities at 20/sup 0/C were, in percent, 51.7 for AlBr/sub 3/, 53.2 for CoBr/sub 2/, 1.1 for PbBr/sub 2/, 59.6 for MnBr/sub 2/, 39.5 for KBr, and 47.4 for Na Br. At 60/sup 0/C,the solubilities were, in percent, 53.3 for AlBr/sub 3/, 2.2 for PbBr/sub 2/, 46.0 for KBr, and 53.8 for NaBr. Solubilities in solutions sparged to HBr saturation at 20/sup 0/C were, in percent, 0.5 for AlBr/sub 3/, 42.0 for CoBr/sub 2/, 32.2 for Br/sub 2/, 21.0 for MnBr/sub 2/, 0.6 for KBr, and 0.3 for NaBr. At 60/sup 0/C, the solubilities at HBr saturation were, in percent, 1.8 for AlBr/sub 3/, 41.4 for PbBr/sub 2/, 1.3 for KBr, and 0.4 for NaBr. CoBr/sub 2/ precipitated out to a minimum solubility of 27.2 pct at 28.7-pct-HBr concentration. Further increases in HBr concentration increased CoBr/sub 2/ solubility because of the formation of bromide complexes. PbBr/sub 2/ increased in solubility as HBr concentration increased.

  11. The in vitro and in vivo profile of aclidinium bromide in comparison with glycopyrronium bromide.

    PubMed

    Gavaldà, Amadeu; Ramos, Israel; Carcasona, Carla; Calama, Elena; Otal, Raquel; Montero, José Luis; Sentellas, Sonia; Aparici, Monica; Vilella, Dolors; Alberti, Joan; Beleta, Jorge; Miralpeix, Montserrat

    2014-08-01

    This study characterised the in vitro and in vivo profiles of two novel long-acting muscarinic antagonists, aclidinium bromide and glycopyrronium bromide, using tiotropium bromide and ipratropium bromide as comparators. All four antagonists had high affinity for the five muscarinic receptor sub-types (M1-M5); aclidinium had comparable affinity to tiotropium but higher affinity than glycopyrronium and ipratropium for all receptors. Glycopyrronium dissociated faster from recombinant M3 receptors than aclidinium and tiotropium but more slowly than ipratropium; all four compounds dissociated more rapidly from M2 receptors than from M3 receptors. In vitro, aclidinium, glycopyrronium and tiotropium had a long duration of action at native M3 receptors (>8 h versus 42 min for ipratropium). In vivo, all compounds were equi-potent at reversing acetylcholine-induced bronchoconstriction. Aclidinium, glycopyrronium and ipratropium had a faster onset of bronchodilator action than tiotropium. Aclidinium had a longer duration of action than glycopyronnium (time to 50% recovery of effect [t½ offset] = 29 h and 13 h, respectively); these compare with a t½ offset of 64 h and 8 h for tiotropium and ipratropium, respectively. Aclidinium was less potent than glycopyrronium and tiotropium at inhibiting salivation in conscious rats (dose required to produce half-maximal effect [ED50] = 38, 0.74 and 0.88 μg/kg, respectively) and was more rapidly hydrolysed in rat, guinea pig and human plasma compared with glycopyrronium or tiotropium. These results indicate that while aclidinium and glycopyrronium are both potent antagonists at muscarinic receptors with similar kinetic selectivity for M3 receptors versus M2, aclidinium has a longer dissociation half-life at M3 receptors and a longer duration of bronchodilator action in vivo than glycopyrronium. The rapid plasma hydrolysis of aclidinium, coupled to its kinetic selectivity, may confer a reduced propensity for systemic

  12. Bromoform formation in ozonated groundwater containing bromide and humic substances

    SciTech Connect

    Cooper, W.J.; Amy, G.L.; Moore, C.A.; Zika, R.G.

    1986-01-01

    The effect of bromide ion, organic carbon concentration (natural aquatic humic substances), pH, and solar irradiation on the formation of bromoform in ozonated groundwater has been studied. The studies were conducted on four unique samples of groundwater taken from different regions of the Biscayne Aquifer in southern Florida. All other conditions being equal, increases in bromide ion concentrations resulted in increases in CHBr/sub 3/ formation. In three of the four samples, CHBr/sub 3/ formation decreased as the pH level increased from 5 to 9. The fourth sample exhibited an opposite trend whereby the CHBr/sub 3/ concentration increased with increasing pH. Bromoform concentration increased with increased O/sub 3/ concentration over an ozone dosage range of 3.4 to 6.7 mg/L. Ozonated samples placed in sunlight immediately after ozone addition showed a decrease in the formation of CHBr/sub 3/ presumably due to the photodecomposition of HOBr/OBr.

  13. A drinking water utility's perspective on bromide, bromate, and ozonation.

    PubMed

    Bonacquisti, Thomas P

    2006-04-17

    Application of ozone in drinking water treatment plants in the US is growing because of ozone's multiple benefits. Ozone functions as a powerful oxidizing agent and disinfecting agent, it improves finished water quality by reducing turbidity, it reduces the formation of many halogenated disinfection by-products, and it is capable of treating chlorine resistant organisms like cryptosporidia. However, when bromide ion is present, e.g. from the geology, runoff, or sea water intrusion, ozone will convert some of the bromide to bromate depending upon the treatment reaction conditions. Bromate can also be introduced into drinking water as a contaminant in the chlorine used for disinfection. The current maximum contaminant level (MCL) in the USA is 0.010 mg/L, and the maximum contaminant level goal (MCLG) is zero, because of the possibility that bromate may function as a genotoxic carcinogen. The level of the MCL, especially if it is lowered, will significantly impact the ability of many water suppliers to utilize ozone in their water treatment processes and also raise the costs of those applications.

  14. Octahedral Rotation Preferences in Perovskite Iodides and Bromides.

    PubMed

    Young, Joshua; Rondinelli, James M

    2016-03-03

    Phase transitions in ABX3 perovskites are often accompanied by rigid rotations of the corner-connected BX6 octahedral network. Although the mechanisms for the preferred rotation patterns of perovskite oxides are fairly well recognized, the same cannot be said of halide variants (i.e., X = Cl, Br, or I), several of which undergo an unusual displacive transition to a tetragonal phase exhibiting in-phase rotations about one axis (a(0)a(0)c(+) in Glazer notation). To discern the chemical factors stabilizing this unique phase, we investigated a series of 12 perovskite bromides and iodides using density functional theory calculations and compared them with similar oxides. We find that in-phase tilting provides a better arrangement of the larger bromide and iodide anions, which minimizes the electrostatic interactions, improves the bond valence of the A-site cations, and enhances the covalency between the A-site metal and Br(-) or I(-) ions. The opposite effect is present in the oxides, with out-of-phase tilting maximizing these factors.

  15. Deswelling kinetics of polyacrylate gels in solutions of cetyltrimethylammonium bromide.

    PubMed

    Nilsson, Peter; Hansson, Per

    2007-08-23

    The deswelling kinetics of single sodium polyacrylate gel beads (radius 40-160 microm) in aqueous solutions of cetyltrimethylammonium bromide under conditions of forced convection are investigated using micromanipulator assisted light microscopy. The purpose of the study is to further evaluate a previously published model (J. Phys. Chem. B 2003, 107, 9203) using a higher homolog surfactant. For gels with expected fast deswelling (small gel size/low surfactant concentration) and/or in low electrolyte concentration, the model is found to correctly predict the deswelling characteristics of the gel beads. However, for some gels with expected slow deswelling, especially in high electrolyte concentration (10 mM NaBr), the model widely underestimates the required deswelling time. The reason for this is argued to be the longer time frame and high bromide concentration allowing the formation of a denser, more ordered structure in the surface phase, which resists the deformation and reorganization of material necessary for deswelling. Unexpectedly long lag times before the start of deswelling are also found for gels in low surfactant concentration, indicating that a relatively high surfactant concentration in the gel, greatly exceeding the critical aggregation concentration, is needed to start formation of a collapsed surface phase. This critical surfactant concentration is found to be dependent on initial gel radius, as small gels require a relatively higher concentration to initiate collapse.

  16. Phase Behavior of N2O and CO2 in Room-Temperature Ionic Liquids [bmim][Tf2N], [bmim][BF4], [bmim][N(CN)2], [bmim][Ac], [eam][NO3], and [bmim][SCN

    NASA Astrophysics Data System (ADS)

    Shiflett, Mark B.; Niehaus, Anne Marie S.; Elliott, Beth A.; Yokozeki, A.

    2012-03-01

    The gas solubility of nitrous oxide (N2O) in room-temperature ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium thiocyanate, and ethylammonium nitrate has been measured at isothermal conditions from about (283 to 348)K using a gravimetric microbalance. The observed pressure-temperature composition ( PTx) data have been analyzed by use of a generic Redlich-Kwong equation-of-state (EOS) model, which has been successfully applied in our previous works. The interaction parameters have been determined using our measured vapor-liquid equilibrium data. Vapor-liquid-liquid equilibrium measurements have been made and validate EOS model predictions which suggest that these systems demonstrate Type III and Type V phase behavior, according to the classification of van Konynenburg and Scott. The global phase behavior of N2O has also been compared with both the measured data from this study and literature data for carbon dioxide (CO2) in each ionic liquid and Henry's law constants are compared at room temperature (298.15 K).

  17. Enzymatic Transesterification of Kraft Lignin with Long Acyl Chains in Ionic Liquids.

    PubMed

    Hulin, Lise; Husson, Eric; Bonnet, Jean-Pierre; Stevanovic, Tatjana; Sarazin, Catherine

    2015-09-09

    Valorization of lignin is essential for the economic viability of the biorefinery concept. For example, the enhancement of lignin hydrophobicity by chemical esterification is known to improve its miscibility in apolar polyolefin matrices, thereby helping the production of bio-based composites. To this end and due to its many reactive hydroxyl groups, lignin is a challenging macromolecular substrate for biocatalyzed esterification in non-conventional media. The present work describes for the first time the lipase-catalyzed transesterification of Kraft lignin in ionic liquids (ILs). Three lipases, three 1-butyl-3-methylimidazolium based ILs and ethyl oleate as long chain acyl donor were selected. Best results were obtained with a hydrophilic/hydrophobic binary IL system (1-butyl-3-methylimidazolium trifluoromethanesulfonate/1-butyl-3-methylimidazolium hexafluoro- phosphate, 1/1 v/v) and the immobilized lipase B from Candida antarctica (CALB) that afforded a promising transesterification yield (ca. 30%). Similar performances were achieved by using 1-butyl-3-methylimidazolium hexafluorophosphate as a coating agent for CALB rather than as a co-solvent in 1-butyl-3-methylimidazolium trifluoromethane-sulfonate thus limiting the use of hydrophobic IL. Structural characterization of lignin oleate was performed by spectroscopic studies (FTIR and ¹H-NMR). The synthesized lignin oleate exhibited interesting thermal and textural properties, different from those of the original Kraft lignin.

  18. Validation of an automated fluorescein method for determining bromide in water

    USGS Publications Warehouse

    Fishman, M. J.; Schroder, L.J.; Friedman, L.C.

    1985-01-01

    Surface, atmospheric precipitation and deionized water samples were spiked with ??g l-1 concentrations of bromide, and the solutions stored in polyethylene and polytetrafluoroethylene bottles. Bromide was determined periodically for 30 days. Automated fluorescein and ion chromatography methods were used to determine bromide in these prepared samples. Analysis of the data by the paired t-test indicates that the two methods are not significantly different at a probability of 95% for samples containing from 0.015 to 0.5 mg l-1 of bromide. The correlation coefficient for the same sets of paired data is 0.9987. Recovery data, except for the surface water samples to which 0.005 mg l-1 of bromide was added, range from 89 to 112%. There appears to be no loss of bromide from solution in either type of container.Surface, atmospheric precipitation and deionized water samples were spiked with mu g l** minus **1 concentrations of bromide, and the solutions stored in polyethylene and polytetrafluoroethylene bottles. Bromide was determined periodically for 30 days. Automated fluorescein and ion chromatography methods were used to determine bromide in these prepared samples. Analysis of the data by the paired t-test indicates that the two methods are not significantly different at a probability of 95% for samples containing from 0. 015 to 0. 5 mg l** minus **1 of bromide. The correlation coefficient for the same sets of paired data is 0. 9987. Recovery data, except for the surface water samples to which 0. 005 mg l** minus **1 of bromide was added, range from 89 to 112%. Refs.

  19. Optical and Rheological Properties of a Semi-Diluted Equimolar Solution of Cetyltrimethylammonium Bromide and Potassium Bromide

    NASA Astrophysics Data System (ADS)

    Decruppe, J. P.; Cappelaere, E.; Cressely, R.

    1997-02-01

    We report in this paper the results of rheological and optical experiments performed on a semi-diluted viscoelastic solution of cetyltrimethylammonium bromide (CTAB) in water with sodium bromide at a concentration of 0.3 M l^{-1} in surfactant and salt. This concentration in surfactant is much smaller than the concentration which gives a nematic phase at rest. The solution behaves like a Maxwell fluid with a single relaxation time. When submitted to a shear flow, this solution shows a behaviour typical of a system undergoing a phase transition. When observed between crossed polarizer and analyzer, the gap of the Couette cell appears divided in two bands the optical properties of which are different; in rheology, the curves σ(dot{γ}) are also characteristic of these systems where the shear stress presents a plateau extending between two critical values, dot{γ}_{1c}, and dot{γ}_{2c} of the shear rate. We finally compare the results with previous experiments performed on a concentrated solution of CTAB containing no salt.

  20. Budget of Methyl Bromide in the Atmosphere: Isotopic Constraints

    NASA Astrophysics Data System (ADS)

    Bill, M.; Miller, L. G.; Rhew, R. C.; Goldstein, A. H.

    2001-12-01

    Bromine radicals contribute significantly to stratospheric ozone loss through coupled reactions with ClO, HO2, and NO2 radicals. Bromine is approximately 40-100 times more effective, atom for atom, at destroying ozone than chlorine. For instance, Br coupled reactions are responsible for 30 to 50% of the total ozone loss in the polar vortex. The largest source of bromine to the stratosphere is methyl bromide (CH3Br). CH3Br has a concentration in the troposphere of about 10 pptv, a total estimated lifetime of 0.6 to 0.9 years, and has the highest concentration of any long lived organobromine. Unlike chlorofluorocarbons, which are produced entirely by humans, methyl bromide is produced by both anthropogenic and natural processes. We are developing the use of stable isotopes to constrain the budget of CH3Br through quantification of the source signatures and the isotopic fractionations associated with sinks. The largest natural sources appear to be biological production in oceans ( ~35%), biomass burning ( ~13%), and salt marshes ( ~10%). Thus far, the only natural emissions to be isotopically characterized is from salt marsh plants. Carbon isotopic ratios of CH3Br emitted from the salt marsh have a strong diurnal variation from -65\\permil during daytime when emission rates are highest to -12\\permil at night when emissions are ~13% of the daytime rates. The \\delta13C weighted mean of salt marsh emission is -43\\permil CH3Br. Anthropogenically produced CH3Br is used for fumigation of soils, harvested crops and structures, and represents approximately 30% of the total source flux. The fumigation of harvested crops and structures constitutes approximately one third of the anthropogenic source to the atmosphere and, because the release rate of applied CH3Br approaches 100%, it should have a mean isotopic composition equal to industrially manufactured CH3Br, -54.4\\permil. However during soil fumigation, some of the CH3Br is consumed insitu causing isotopic fractionation

  1. The first barium tin(II) bromide fluoride

    NASA Astrophysics Data System (ADS)

    Dénès, Georges; Merazig, Hocine; Muntasar, Abdualhafeed; Porterfield, Robyn

    2014-04-01

    In an effort to prepare barium tin(II) bromide fluorides for the first time, possibly similar to the chloride fluorides obtained earlier in our laboratory, precipitation reactions were carried out by mixing aqueous solutions of SnF2 and of BaBr2.2H2O. In contrast with the chloride fluoride system, a single powdered phase was obtained throughout the SnF2 - BaBr2 system, with the yield being maximum at X ≈ 0.25, where X is the molar fraction of barium bromide in the reaction mixture. Phase identification with the JCPDS database failed to produce a match, confirming that a new phase had been produced. The exact chemical composition of the new compound has not been obtained yet. Based on the X value for the maximum yield, the Sn/Ba ratio is likely to be 3/1 or 2/1. The Mössbauer spectrum at ambient conditions shows that bonding to tin(II) is covalent, therefore with the tin lone pair being stereoactive. The Mössbauer parameters ( δ = 3.68 mm/s, Δ = 0.99 mm/s) are similar to those of SnBrF and of Sn2BrF5, thereby showing that tin is bonded to both fluorine and bromine. The larger isomer shift and lower quadrupole splitting than in tin(II) fluorides show that the stereoactivity of the tin lone pair is lower than in the fluorides. The Mössbauer parameters fit well the linear correlation of the quadrupole splitting versus the isomer shift" that has been shown to be present in other series of tin(II) compounds. The linear decrease on this correlation shows that the contribution of non-spherical orbitals ( p and d) to the lone pair is a much larger contributor to the quadrupole splitting than lattice distortions. The structure is likely made of Ba2+ cations and tin(II) fluoride bromide polyatomic anions, with covalent bonding withinthe anions.

  2. Solid phase microextraction for active or passive sampling of methyl bromide during fumigations

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The high diffusivity and volatility of methyl bromide make it an ideal compound for Solid Phase Micro Extraction (SPME)-based sampling of air prior to gas-chromatographic quantifications. SPME fibers can be used as active methyl bromide samplers, with high capacities and an equilibrium time of 1-2 m...

  3. Synergistic Actions of Pyridostigmine Bromide and Insecticides on Muscle and Vascular Nociceptors

    DTIC Science & Technology

    2014-01-01

    TITLE: Synergistic Actions of Pyridostigmine Bromide and Insecticides on Muscle and Vascular Nociceptors PRINCIPAL INVESTIGATOR: Brian...pyridostigmine bromide (PB) and a variety of insecticides /repellants co-varied with the development of this condition (Research Advisory Committee on Gulf War...might occur between insecticides , repellants and nerve agent prophylactics used during the GW could modify or damage the machinery of protein

  4. Destruction of methyl bromide sorbed to activated carbon by thiosulfate and electrolysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl bromide is widely used as a fumigant for post-harvest and quarantine uses at port facilities due to the low treatment times required, but it is vented to the atmosphere after its use. Due to the potential contributions of methyl bromide to stratospheric ozone depletion, technologies for the c...

  5. 75 FR 41177 - Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-15

    ... 2013 control period? U.S. consumption of methyl bromide in the U.S. has declined significantly over the... Act, 42 U.S.C. 7671c. Under EPA implementing regulations, methyl bromide production and consumption... Montreal Protocol provides that the Parties may exempt ``the level of production or consumption that...

  6. Classifying the Basic Parameters of Ultraviolet Copper Bromide Laser

    NASA Astrophysics Data System (ADS)

    Gocheva-Ilieva, S. G.; Iliev, I. P.; Temelkov, K. A.; Vuchkov, N. K.; Sabotinov, N. V.

    2009-10-01

    The performance of deep ultraviolet copper bromide lasers is of great importance because of their applications in medicine, microbiology, high-precision processing of new materials, high-resolution laser lithography in microelectronics, high-density optical recording of information, laser-induced fluorescence in plasma and wide-gap semiconductors and more. In this paper we present a statistical study on the classification of 12 basic lasing parameters, by using different agglomerative methods of cluster analysis. The results are based on a big amount of experimental data for UV Cu+ Ne-CuBr laser with wavelengths 248.6 nm, 252.9 nm, 260.0 nm and 270.3 nm, obtained in Georgi Nadjakov Institute of Solid State Physics, Bulgarian Academy of Sciences. The relevant influence of parameters on laser generation is also evaluated. The results are applicable in computer modeling and planning the experiments and further laser development with improved output characteristics.

  7. Accommodation coefficient of HOBr on deliquescent sodium bromide aerosol particles

    NASA Astrophysics Data System (ADS)

    Wachsmuth, M.; Gäggeler, H. W.; von Glasow, R.; Ammann, M.

    2002-06-01

    Uptake of HOBr on sea salt aerosol, sea salt brine or ice is believed to be a key process providing a source of photolabile bromine (Br2) and sustaining ozone depletion cycles in the Arctic troposphere. In the present study, uptake of HOBr on sodium bromide (NaBr) aerosol particles was investigated at an extremely low HOBr concentration of 300 cm-3 using the short-lived radioactive isotopes 83-86Br. Under these conditions, at maximum one HOBr molecule was taken up per particle. The rate of uptake was clearly limited by the mass accommodation coefficient, which was calculated to be 0.6 ± 0.2. This value is a factor of 10 larger than estimates used in earlier models. The atmospheric implications are discussed using the box model "MOCCA'', showing that the increase of the accommodation coefficient of HOBr by a factor of 10 only slightly affects net ozone loss, but significantly increases chlorine release.

  8. Theoretical and experimental studies of silver bromide clusters

    NASA Astrophysics Data System (ADS)

    Zhang, Hongguang

    2000-11-01

    This work consists of three parts: Experimental synthesis of silver bromide clusters via the electroporation of unilamellar dioleoylphosphatidylcholine (DOPC) vesicles, theoretical study of the structure and electronic properties of (AgBr)n clusters, and characterization of silver bromide clusters grown and their interaction with the surface of DOPC vesicles. In the first part, we successfully synthesized AgBr quantum dots via the electroporation of vesicles. For the first time, we observed the entire blue-shift followed by red-shift of the absorption band (274nm --> 5h 269nm --> 6h 273nm) that is associated with the growth of the silver bromide clusters. The turn-around point is at 269 nm. In the second part, we have theoretically investigated the structures and UV absorption spectra of (AgBr)n clusters (n = 1-9) in both the gas phase and in a dielectric medium. The structures of clusters were determined at the B3P86/SB level with full geometry optimization. For clusters with n = 1-6, extensive searches of the potential energy surface yielded only one minimum, while larger clusters displayed two or more minima. UV absorption spectra were calculated by the configuration interaction singlet (CIS) method with a much larger basis set. Our computational results parallel the experimental trends, and show that the turn- around point occurs at the trimer according to HOMO-LUMO gap calculation and at the tetramer according to CIS calculation. The molecular origin of the blue/red shift associated with AgBr cluster growth can be readily explained by examining the orbital interactions which dominate the process and by the structure of the clusters. The detailed molecular orbital energy level correlation diagram for the dimerization, trimerization and tetramerization will be presented. In the third part, TEM characterization of the quantum dots show

  9. Error Evaluation of Methyl Bromide Aerodynamic Flux Measurements

    USGS Publications Warehouse

    Majewski, M.S.

    1997-01-01

    Methyl bromide volatilization fluxes were calculated for a tarped and a nontarped field using 2 and 4 hour sampling periods. These field measurements were averaged in 8, 12, and 24 hour increments to simulate longer sampling periods. The daily flux profiles were progressively smoothed and the cumulative volatility losses increased by 20 to 30% with each longer sampling period. Error associated with the original flux measurements was determined from linear regressions of measured wind speed and air concentration as a function of height, and averaged approximately 50%. The high errors resulted from long application times, which resulted in a nonuniform source strength; and variable tarp permeability, which is influenced by temperature, moisture, and thickness. The increase in cumulative volatilization losses that resulted from longer sampling periods were within the experimental error of the flux determination method.

  10. Reactions of buffers in cyanogen bromide-induced ligations.

    PubMed

    Vogel, Heike; Gerlach, Claudia; Richert, Clemens

    2013-01-01

    Rapid, template-directed ligation reactions between a phosphate-terminated oligonucleotide and an unphosphorylated reaction partner may be induced by cyanogen bromide (BrCN). Frequently, however, the reaction is low yielding, and even a large excess of the condensing agent can fail to induce quantitative conversions. In this study, we used BrCN to induce chemical primer extension reactions. Here, we report that buffers containing hydroxyl groups react with short oligodeoxynucleotides in the presence of BrCN. One stable adduct between HEPBS buffer and cytosine was characterized by mass spectrometry and NMR after HPLC purification, indicating that a side reaction occurred at this nucleobase. Further, a first example of a primer extension reaction between an unmodified oligodeoxynucleotide as primer and dGMP is reported. Together, our results shed light on the potency, as well as the drawbacks of BrCN as a highly reactive condensing reagent for the ligation of unmodified nucleic acids.

  11. Location of Bromide Ions in Tetragonal Lysozyme Crystals

    NASA Technical Reports Server (NTRS)

    Lim, Kap; Nadarajah, Arunan; Forsythe, Elizabeth L.; Pusey, Marc L.

    1998-01-01

    Anions have been shown to play a dominant role in the crystallization of chicken egg white lysozyme from salt solutions. Previous studies employing X-ray crystallography had found one chloride ion binding site in the tetragonal crystal form of the protein and four nitrate ion binding sites in the monoclinic form. In this study the anion positions in the tetragonal form were determined from the difference Fourier map obtained from lysozyme crystal grown in bromide and chloride solutions. Five possible anion binding sites were found in this manner. Some of these sites were in pockets containing basic residues while others were near neutral, but polar, residues. The sole chloride ion binding site found in previous studies was confirmed, while four of these sites corresponded to four binding sites found for nitrate ions in monoclinic crystals. The study suggests that most of the anion binding sites in lysozyme remain unchanged, even when different anions and different crystal forms of lysozyme are employed.

  12. Unveiling Residual Molecular Binding in Triply Charged Hydrogen Bromide

    SciTech Connect

    Penent, F.; Lablanquie, P.; Palaudoux, J.; Gamblin, G.; Carniato, S.; Andric, L.; Hikosaka, Y.; Ito, K.

    2011-03-11

    We present an experimental and theoretical study of triply charged hydrogen bromide ions formed by photoionization of the inner 3d shell of Br. The experimental results, obtained by detecting the 3d photoelectron in coincidence with the two subsequent Auger electrons, are analyzed using calculated potential energy curves of HBr{sup 3+}. The competition between the short-range chemical binding potential and the Coulomb repulsion in the dissociative process is shown. Two different mechanisms are observed for double Auger decay: one, a direct process with simultaneous ejection of two Auger electrons to final HBr{sup 3+} ionic states and the other, a cascade process involving double Auger decay characterized by the autoionization of Br*{sup +} ion subsequent to the HBr{sup 2+} fragmentation.

  13. Effects of pyridostigmine bromide on in-flight aircrew performance.

    PubMed

    Gawron, V J; Schiflett, S G; Miller, J C; Slater, T; Ball, J F

    1990-02-01

    The effects of a chemical defense pretreatment drug, pyridostigmine bromide (PB), on in-flight aircrew performance were assessed using the Total In-Flight Simulator (TIFS) aircraft. TIFS was used to supply appropriate control dynamics, handling characteristics, and cockpit instrumentation for a tactical transport airdrop simulation. Twenty-one C-130 pilots flew two familiarization and four data flights. During two data flights PB was given to both members of the aircrew using the dosage regimen of 30 mg/8 h prescribed by the U.S. Air Force surgeon general. The drug was administered using a double-blind technique. The results indicated that (1) aircrews successfully completed their assigned mission, (2) airdrop inaccuracies and navigation errors in time and distance were not specifically related to PB, (3) performance and crew coordination were not affected by PB, (4) PB and pilot/copilot not discriminate beyond chance between PB and placebo conditions.

  14. Tiotropium Bromide in Chronic Obstructive Pulmonary Disease and Bronchial Asthma

    PubMed Central

    Alvarado-Gonzalez, Alcibey; Arce, Isabel

    2015-01-01

    Inhaled bronchodilators are the mainstay of pharmacological treatment for stable chronic obstructive pulmonary disease (COPD), including β2-agonists and muscarinic antagonists. Tiotropium bromide, a long-acting antimuscarinic bronchodilator (LAMA), is a treatment choice for moderate-to-severe COPD; its efficacy and safety have been demonstrated in recent trials. Studies also point to a beneficial role of tiotropium in the treatment of difficult-to-control asthma and a potential function in the asthma-COPD overlap syndrome (ACOS). Combination of different bronchodilator molecules and addition of inhaled corticosteroids are viable therapeutic alternatives. A condensation of the latest trials and the rationale behind these therapies will be presented in this article. PMID:26491494

  15. N-(2-Bromo-benz-yl)cinchoninium bromide.

    PubMed

    Skórska-Stania, Agnieszka; Jezierska-Zięba, Magdalena; Kąkol, Barbara; Fedoryński, Michał; Oleksyn, Barbara J

    2012-09-01

    The title compound {systematic name: 1-(2-bromo-benz-yl)-5-ethenyl-2-[hy-droxy(quinolin-4-yl)meth-yl]-1-aza-bicyclo-[2.2.2]octan-1-ium bromide}, C(26)H(28)BrN(2)O(+)·Br(-), is a chiral quater-nary ammonium salt of one of the Cinchona alkaloids. The planes of the quinoline and of the bromo-benzyl substituent are inclined to one another by 9.11 (9)°. A weak intra-molecular C-H⋯O hydrogen bond occurs. The crystal structure features strong O-H⋯Br hydrogen bonds and weak C-H⋯Br inter-actions.

  16. N-(2-Bromo­benz­yl)cinchoninium bromide

    PubMed Central

    Skórska-Stania, Agnieszka; Jezierska-Zięba, Magdalena; Kąkol, Barbara; Fedoryński, Michał; Oleksyn, Barbara J.

    2012-01-01

    The title compound {systematic name: 1-(2-bromo­benz­yl)-5-ethenyl-2-[hy­droxy(quinolin-4-yl)meth­yl]-1-aza­bicyclo­[2.2.2]octan-1-ium bromide}, C26H28BrN2O+·Br−, is a chiral quater­nary ammonium salt of one of the Cinchona alkaloids. The planes of the quinoline and of the bromo­benzyl substituent are inclined to one another by 9.11 (9)°. A weak intra­molecular C—H⋯O hydrogen bond occurs. The crystal structure features strong O—H⋯Br hydrogen bonds and weak C—H⋯Br inter­actions. PMID:22969676

  17. Electrochemical and spectroscopic study of octadecyltrimethylammonium bromide/DNA surfoplexes.

    PubMed

    Rodríguez-Pulido, Alberto; Aicart, Emilio; Junquera, Elena

    2009-04-21

    The use of cationic micelles consisting of octadecyltrimethylammonium bromide (C18TAB) to compact calf thymus DNA has been investigated in aqueous buffered solution at 310.15 K by means of conductometry, electrophoretic mobility, and several fluorescence spectroscopy methods. The results indicate that C18TAB micelles, consisting of 44 monomers on average, may compact DNA molecule by an electrostatic interaction that takes place at the cationic spherical micelle surface. The surfoplexes thus formed show a surface density charge that goes from negative to positive values at a Lmic/D mass ratio of around 1.0 (where Lmic and D are the masses of micellized cationic surfactant and DNA), called the isoneutrality ratio (Lmic/D)phi. Values of this characteristic parameter, determined in this work not only from the electrochemical experimental data but also from spectroscopic measurements, are in very good agreement with those ones calculated from molecular parameters and some other properties also obtained in this work. The electrostatic character of the DNA-micelle interaction has been confirmed by analyzing the decrease in fluorescence emission of the fluorophore ethidium bromide, EtBr, initially intercalated between DNA base pairs, as long as the surfoplexes are formed. Fluorescence anisotropy experiments have revealed that micelle packing becomes more rigid in the presence of DNA, but once the surfoplex is formed, the fluidity increases with the Lmic/D mass ratio, attaining its maximum when the isoneutrality ratio is exceeded. This fact, together with the net positive charge of the surfoplexes with the Lmic/D mass ratio over the isoneutrality ratio, makes this regimen of lipid and DNA content the optimum for efficiency in the transfection process.

  18. Comparative mobility of sulfonamides and bromide tracer in three soils

    USGS Publications Warehouse

    Kurwadkar, S.T.; Adams, C.D.; Meyer, M.T.; Kolpin, D.W.

    2011-01-01

    In animal agriculture, sulfonamides are one of the routinely used groups of antimicrobials for therapeutic and sub-therapeutic purposes. It is observed that, the animals when administered the antimicrobials, often do not completely metabolize them; and excrete the partially metabolized forms into the environment. Due to the continued use of antimicrobials and disposal of untreated waste, widespread occurrence of partially metabolized antimicrobials in aquatic and terrestrial environments has been reported in various scientific journals. In this research, the mobility of two sulfonamides - sulfamethazine (SMN), sulfathiazole (STZ) and a conservative bromide tracer was investigated in three soils collected from regions in the United States with large number of concentrated animal-feed operations. Results of a series of column studies indicate that the mobility of these two sulfonamides was dependent on pH, soil charge density, and contact time. At low pH and high charge density, substantial retention of sulfonamides was observed in all three soils investigated, due to the increased fraction of cationic and neutral forms of the sulfonamides. Conversely, enhanced mobility was observed at high pH, where the sulfonamides are predominantly in the anionic form. The results indicate that when both SMN and STZ are predominantly in anionic forms, their mobility approximates the mobility of a conservative bromide tracer. This observation is consistent for the mobility of both SMN and STZ individually, and also in the presence of several other antimicrobials in all three soils investigated. Higher contact time indicates lower mobility due to increased interaction with soil material. ?? 2011.

  19. Nebulised ipratropium bromide and sodium cromoglycate in the first two years of life.

    PubMed Central

    Henry, R L; Hiller, E J; Milner, A D; Hodges, I G; Stokes, G M

    1984-01-01

    In a double blind crossover trial, we compared sodium cromoglycate, ipratropium bromide, and water in 23 asthmatic children less than 2 years old (mean age 11.8 months). Each child received nebulised solutions containing 20 mg of sodium cromoglycate, 250 micrograms of ipratropium bromide, or 2 ml water three times a day for three two month periods. Daily symptom scores did not show significant differences between the treatments but parental preferences indicated that both sodium cromoglycate and ipratropium bromide were superior to placebo. Sodium cromoglycate was prophylactic and was more likely to help the older patients. Ipratropium bromide produced an immediate clinical benefit and the response was not age dependent. We were unable to pick responders from non-responders on the basis of lung function tests performed on a routine outpatient basis. Both ipratropium bromide and sodium cromoglycate help some but not all asthmatic children aged less than 2 years. PMID:6230059

  20. X-Ray absorption spectroscopy investigation of 1-alkyl-3-methylimidazolium bromide salts

    SciTech Connect

    D'Angelo, Paola; Zitolo, Andrea; Migliorati, Valentina; Bodo, Enrico; Caminiti, Ruggero; Aquilanti, Giuliana; Hazemann, Jean Louis; Testemale, Denis; Mancini, Giordano

    2011-08-21

    X-ray absorption spectroscopy (XAS) has been used to unveil the bromide ion local coordination structure in 1-alkyl-3-methylimidazolium bromide [C{sub n}mim]Br ionic liquids (ILs) with different alkyl chains. The XAS spectrum of 1-ethyl-3-methylimidazolium bromide has been found to be different from those of the other members of the series, from the butyl to the decyl derivatives, that have all identical XAS spectra. This result indicates that starting from 1-buthyl-3-methylimidazolium bromide the local molecular arrangement around the bromide anion is the same independently from the length of the alkyl chain, and that the imidazolium head groups in the liquid ILs with long alkyl chains assume locally the same orientation as in the [C{sub 4}mim]Br crystal. With this study we show that the XAS technique is an effective direct tool for unveiling the local structural arrangements around selected atoms in ILs.

  1. Bromide's effect on DBP formation, speciation, and control; Part 1: Ozonation

    SciTech Connect

    Shukairy, H.M.; Summers, R.S. ); Miltner, R.J. . Drinking Water Research Div.)

    1994-06-01

    The effect of variable ozone dosage and bromide concentration on the formation of organic disinfection by-products (DBPs) and bromate were evaluated. Low ozone dosages resulted in oxidation of organic precursors, yielding decreases in the formation potential for total trihalomethanes (THMs), six haloacetic acids (HAAs), and total organic halide (TOX). Increasing the ozone dosage oxidized bromide to bromate, decreasing the bromide for incorporation into DBPs. Bromate concentrations were linearly correlated with ozone residuals. Changes in the bromine incorporation factors n and n[prime] reflected differences in the resulting speciation of THMs and HAAs, respectively. Because TOX measurements based on chloride equivalence may underestimate the halogenated DBP yield for high-bromide waters, a procedure is described whereby bromide and bromate concentrations were used to correct the TOX measurement.

  2. Understanding lignin treatment in dialkylimidazolium-based ionic liquid-water mixtures.

    PubMed

    Yan, Bing; Li, Kunlan; Wei, Ligang; Ma, Yingchong; Shao, Guolin; Zhao, Deyang; Wan, Wenying; Song, Lili

    2015-11-01

    The treatment of enzymatically hydrolyzed lignin (EHL) in dialkylimidazolium-based ionic liquid (IL)-water mixtures (50-100wt% IL content) was investigated at 150°C for 3h. pH, IL type, and IL content were found to greatly influence the degradation of lignin and the structure of regenerated lignin. 1-Butyl-3-methylimidazolium methylsulfonate-water mixtures with low pH facilitated lignin depolymerization but destroyed the regenerated lignin substructure. Regenerated lignin with low molecular weight and narrow polydispersity index (2.2-7.7) was obtained using a 1-butyl-3-methylimidazolium acetate-based system. Water addition inhibited lignin depolymerization at 50-100wt% IL content, except for 70wt% 1-butyl-3-methylimidazolium chloride-water mixture. Compared with pure IL treatment, obvious differences were observed in the breakdown of inter-unit linkages and ratio of syringyl to guaiacyl units in regenerated lignin with IL-water treatment.

  3. Derivation of an occupational exposure limit (OEL) for n-propyl bromide using an improved methodology.

    PubMed

    Rozman, Karl K; Doull, John

    2002-10-01

    n-Propyl bromide is an industrial solvent with increasing production volume due to its use as a replacement for fluorohydrocarbons. Therefore, the number of occupationally exposed workers is growing accordingly. This manuscript presents a thorough evaluation of available animal and human data to derive an occupational exposure limit (OEL) for n-propyl bromide. In addition, structure activity relationship within the homologous series of methyl, ethyl, and n-propyl bromide and an identical spectrum of effects caused by similar doses of 2-propyl bromide are used to increase the confidence of the analysis. The structure activity relationship was entirely consistent for acute and subchronic (neurologic, reproductive, and hematopoietic) toxicities and for mutagenic potency in that CH3Br was more toxic than CH3CH2Br, which in turn was more toxic than CH3CH2CH2Br in every case in all species studied, including humans. Animals appeared to be similarly susceptible as, or slightly more susceptible than, humans to n-propyl bromide's toxicity. An OEL (60-90 ppm) was derived from a limited human study and supported by an across-the-toxic-spectrum comparison of animal and human data for both n-propyl and 2-propyl bromide. A carcinogenic classification was not deemed necessary at the recommended OEL based on very low mutagenic potency and the consistent structure activity relationship across the homologous series of these alkyl bromides.

  4. Efficacy and safety of ipratropium bromide/albuterol delivered via Respimat inhaler versus MDI.

    PubMed

    Zuwallack, R; De Salvo, M C; Kaelin, T; Bateman, E D; Park, C S; Abrahams, R; Fakih, F; Sachs, P; Pudi, K; Zhao, Y; Wood, C C

    2010-08-01

    We compared the efficacy and safety of ipratropium bromide/albuterol delivered via Respimat inhaler, a novel propellant-free inhaler, versus chlorofluorocarbon (CFC)-metered dose inhaler (MDI) and ipratropium Respimat inhaler in patients with COPD. This was a multinational, randomized, double-blind, double-dummy, 12-week, parallel-group, active-controlled study. Patients with moderate to severe COPD were randomized to ipratropium bromide/albuterol (20/100mcg) Respimat inhaler, ipratropium bromide/albuterol MDI [36mcg/206mcg (Combivent Inhalation Aerosol MDI)], or ipratropium bromide (20mcg) Respimat inhaler. Each medication was administered four times daily. Serial spirometry was performed over 6h (0.15min, then hourly) on 4 test days. The primary efficacy variable was forced expiratory volume in 1s (FEV(1)) change from test day baseline at 12 weeks. A total of 1209 of 1480 randomized, treated patients completed the study; the majority were male (65%) with a mean age of 64 yrs and a mean screening pre-bronchodilator FEV(1) (percent predicted) of 41%. Ipratropium bromide/albuterol Respimat inhaler had comparable efficacy to ipratropium bromide/albuterol MDI for FEV(1) area under the curve at 0-6h (AUC(0-6)), superior efficacy to ipratropium Respimat inhaler for FEV(1) AUC(0-4) and comparable efficacy to ipratropium Respimat inhaler for FEV(1) AUC(4-6). All active treatments were well tolerated. This study demonstrates that ipratropium bromide/albuterol 20/100mcg inhaler administered four times daily for 12 weeks had equivalent bronchodilator efficacy and comparable safety to ipratropium bromide/albuterol 36mcg/206mcg MDI, and significantly improved lung function compared with the mono-component ipratropium bromide 20 mcg Respimat inhaler. [Clinical Trial Identifier Number: NCT00400153].

  5. The role of tiotropium bromide, a long-acting anticholinergic bronchodilator, in the management of COPD.

    PubMed

    Saberi, Farzad; O'Donnell, Denis E

    2005-01-01

    Bronchodilator therapy forms the mainstay of treatment for symptomatic patients with COPD. Long-acting bronchodilators, which maintain sustained airway patency over a 24-hour period, represent an advance in therapy. Tiotropium bromide is a new long-acting inhaled anticholinergic agent with superior pharmacodynamic properties compared with the short-acting anticholinergic, ipratropium bromide. Tiotropium bromide has been consistently shown to have a greater impact than ipratropium bromide on clinically important outcome measures such as health status. The mechanisms of clinical benefit with tiotropium bromide are multifactorial, but improved airway function, which enhances lung emptying and allows sustained deflation of over-inflated lungs, appears to explain improvements in dyspnea and exercise endurance in COPD. Inhaled tiotropium bromide therapy has also been associated with reduction in acute exacerbations of COPD as well as reduced hospitalizations. The safety profile of tiotropium bromide is impressive: dry mouth is the most common adverse event and rarely necessitates termination of the drug. No tachyphylaxis to tiotropium bromide has been demonstrated in clinical trials lasting up to 1 year. There is preliminary information that the combination of long-acting anticholinergics and long-acting beta2-adrenoceptor agonists provides additive physiological and clinical benefits. According to recent international guidelines, long-acting bronchodilators should be considered early in the management of symptomatic patients with COPD in order to achieve effective symptom alleviation and reduction in activity limitation. Tiotropium bromide, because of its once-daily administration and its established efficacy and tolerability profile, has emerged as an attractive therapeutic option for this condition.

  6. Rapid, easy cyanation of aryl bromides and chlorides using nickel salts in conjunction with microwave promotion.

    PubMed

    Arvela, Riina K; Leadbeater, Nicholas E

    2003-11-14

    We report here a fast, easy, and efficient method for the preparation of aryl nitriles from aryl bromides and chlorides. The methodology for aryl bromides involves the use of either Ni(CN)(2) or NaCN and NiBr(2). With aryl chlorides, a mix of NaCN and NiBr(2) is used and the reaction proceeds via the in situ formation of the corresponding aryl bromide. The reaction can be performed in air and is complete within 10 min.

  7. Bronchodilating effect of combined therapy with ipratropium bromide and ondansetron in patients with COPD.

    PubMed

    Pauwels, Romain; Joos, Guy F; Fogarty, Charles; Faiferman, Isidore; Hirschberg, Sandra; Vessey, Rupert; Wouters, Emiel F M

    2008-01-01

    The objectives of this study were to determine the effect of single and repeat dosing with oral ondansetron, a 5-HT3-specific receptor blocker, on the degree and duration of bronchodilation induced by inhaled ipratropium bromide in patients with COPD. Five clinics and university medical centers in four countries participated in the study; 47 patients with COPD were randomized to treatment; 44 completed all treatments. Patients had a baseline (pre-bronchodilator) FEV1>1L and post-bronchodilator (200 mcg salbutamol) FEV1<90% of predicted, with FEV1 reversibility (to 80 mcg inhaled ipratropium bromide and 400 mcg salbutamol) of at least 12% or 200 mL over baseline. The study was divided into two parts. In Part A, each patient received in a random order, four-way crossover manner, single doses of ondansetron placebo (oral) plus ipratropium bromide placebo (inhaled), ondansetron placebo plus ipratropium bromide 40 mcg inhaled via MDI, ondansetron 24 mg oral plus ipratropium bromide placebo and ondansetron 24 mg plus ipratropium bromide 40 mcg. In Part B, each patient received in a random order, two-way crossover manner, ipratropium bromide 40 mcg tid via MDI plus ondansetron 8 mg oral, qid, for 2 days; on day 3 patients received a single dose of ipratropium bromide 40 mcg plus 8 mg oral ondansetron. Alternatively, patients received ipratropium bromide via MDI and oral ondansetron placebo, as described above. Statistically significant differences in weighted mean FEV1 (0-6h), peak FEV1 and FEV1 determined 6h post-dose were noted comparing ipratropium bromide to placebo. Similar positive results were observed for sGaw and FVC. Addition of ondansetron to ipratropium bromide did not significantly modify values obtained with ipratropium alone. Ipratropium bromide induced a marked bronchodilation, compared to placebo. Addition of ondansetron (single or repeated doses) did not significantly increase the degree or duration of bronchodilation induced by ipratropium alone. s

  8. Locations of Bromide Ions in Tetragonal Lysozyme Crystals

    NASA Technical Reports Server (NTRS)

    Lim, Kap; Nadarajah, Arunan; Forsythe, Elizabeth L.; Pusey, Marc L.

    1998-01-01

    Anions have been shown to play a dominant role in the crystallization of chicken egg-white lysozyme from salt solutions. Previous studies employing X-ray crystallography have found one chloride ion binding site in the tetragonal crystal form of the protein and four nitrate ion binding sites in the monoclinic form. In this study the anion positions in the tetragonal form were determined from the difference Fourier map obtained from lysozyme crystals grown in bromide and chloride solutions. Five possible anion-binding sites were found in this manner. Some of these sites were in pockets containing basic residues while others were near neutral, but polar, residues. The sole chloride ion binding site found in previous studies was confirmed, while four further sites were found which corresponded to the four binding sites found for nitrate ions in monoclinic crystals. The study suggests that most of the anion-binding sites in lysozyme remain unchanged even when different anions and different crystal forms of lysozyme are employed.

  9. Structural and electronic properties of Diisopropylammonium bromide molecular ferroelectric crystal

    NASA Astrophysics Data System (ADS)

    Alsaad, A.; Qattan, I. A.; Ahmad, A. A.; Al-Aqtash, N.; Sabirianov, R. F.

    2015-10-01

    We report the results of ab-initio calculations based on Generalized Gradient Approximation (GGA) and hybrid functional (HSE06) of electronic band structure, density of states and partial density of states to get a deep insight into structural and electronic properties of P21 ferroelectric phase of Diisopropylammonium Bromide molecular crystal (DIPAB). We found that the optical band gap of the polar phase of DIPAB is ∼ 5 eV confirming it as a good dielectric. Examination of the density of states and partial density of states reveal that the valence band maximum is mainly composed of bromine 4p orbitals and the conduction band minimum is dominated by carbon 2p, carbon 2s, and nitrogen 2s orbitals. A unique aspect of P21 ferroelectric phase is the permanent dipole within the material. We found that P21 DIPAB has a spontaneous polarization of 22.64 consistent with recent findings which make it good candidate for the creation of ferroelectric tunneling junctions (FTJs) which have the potential to be used as memory devices.

  10. Factors affecting a cyanogen bromide-based assay of thiamin.

    PubMed

    Wyatt, D T; Lee, M; Hillman, R E

    1989-11-01

    We analyzed extensively a modified thiochrome method for thiamin analysis. Acid phosphatase (EC 3.1.3.2) from potato was superior to either alpha-amylase or acid phosphatase from wheat germ as a dephosphorylating agent. Timing of cyanogen bromide exposure was important, but the assay had good precision and accuracy. The standard curve was linear from 10 to 3000 nmol/L. The within-run and between-run coefficients of variation for total thiamin in whole blood were 3.6% and 7.4%, respectively. Analytical recoveries for low, intermediate, and high additions of thiamin to whole blood were 93-109%. Sample yield was increased by 41% (+/- 29% SD) with pre-assay freezing. Samples were stable for two days at room temperature, for seven days when refrigerated, and for two years when frozen. Previously unreported interference was seen with penicillin derivatives, and with several commonly used diuretic and antiepileptic medications. This assay may be suitable for population screening; 200 samples could be analyzed weekly at a cost of +0.20 per sample.

  11. Bioreactors for removing methyl bromide following contained fumigations

    USGS Publications Warehouse

    Miller, L.G.; Baesman, S.M.; Oremland, R.S.

    2003-01-01

    Use of methyl bromide (MeBr) as a quarantine, commodity, or structural fumigant is under scrutiny because its release to the atmosphere contributes to the depletion of stratospheric ozone. A closed-system bioreactor consisting of 0.5 L of a growing culture of a previously described bacterium, strain IMB-1, removed MeBr (> 110 ??mol L-1) from recirculating air. Strain IMB-1 grew slowly to high cell densities in the bioreactor using MeBr as its sole carbon and energy source. Bacterial oxidation of MeBr produced CO2 and hydrobromic acid (HBr), which required continuous neutralization with NaOH for the system to operate effectively. Strain IMB-1 was capable of sustained oxidation of large amounts of MeBr (170 mmol in 46 d). In an open-system bioreactor (10-L fermenter), strain IMB-1 oxidized a continuous supply of MeBr (220 ??mol L-1 in air). Growth was continuous, and 0.5 mol of MeBr was removed from the air supply in 14 d. The specific rate of MeBr oxidation was 7 ?? 10-16 mol cell-1 h-1. Bioreactors such as these can therefore be used to remove large quantities of contaminant MeBr, which opens the possibility of biodegradation as a practical means for its disposal.

  12. Bacterial oxidation of methyl bromide in Mono Lake, California

    USGS Publications Warehouse

    Connell, T.L.; Joye, S.B.; Miller, L.G.; Oremland, R.S.

    1997-01-01

    The oxidation of methyl bromide (MeBr) in the water column of Mono Lake, CA, was studied by measuring the formation of H14CO3 from [14C]MeBr. Potential oxidation was detected throughout the water column, with highest rates occurring in the epilimnion (5-12 m depth). The oxidation of MeBr was eliminated by filter-sterilization, thereby demonstrating the involvement of bacteria. Vertical profiles of MeBr activity differed from those obtained for nitrification and methane oxidation, indicating that MeBr oxidation is not simply a co-oxidation process by either nitrifiers or methanotrophs. Furthermore, specific inhibitors of methane oxidation and/or nitrification (e.g., methyl fluoride, acetylene, allyl sulfide) had no effect upon the rate of MeBr oxidation in live samples. Of a variety of potential electron donors added to Mono Lake water, only trimethylamine resulted in the stimulation of MeBr oxidation. Cumulatively, these results suggest that the oxidation of MeBr in Mono Lake waters is attributable to trimethylamine-degrading methylotrophs. Neither methyl chloride nor methanol inhibited the oxidation of [14C]MeBr in live samples, indicating that these bacteria directly oxidized MeBr rather than the products of MeBr nucleophilic substitution reactions.

  13. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices.

    PubMed

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-11-09

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55-65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2',2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m(2), while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature.

  14. Chloride, bromide and iodide scintillators with europium doping

    DOEpatents

    Zhuravleva, Mariya; Yang, Kan

    2014-08-26

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  15. Water-lithium bromide double-effect absorption cooling analysis

    NASA Astrophysics Data System (ADS)

    Vliet, G. C.; Lawson, M. B.; Lithgow, R. A.

    1980-12-01

    A numerical model was developed for the transient simulation of the double-effect, water-lithium bromide absorption cooling machine and was used to determine the effect of the various design and input variables on the absorption unit performance. The performance parameters considered were coefficient of performance and cooling capacity. The variables considered include source hot water, cooling water, and chilled water temperatures; source hot water, cooling water, and chilled water flow rates; solution circulation rate; heat exchanger areas; pressure drop between evaporator and absorber; solution pump characteristics; and refrigerant flow control methods. The performance sensitivity study indicates that the distribution of heat exchanger area among the various (seven) heat exchange components is a very important design consideration. Moreover, it indicated that the method of flow control of the first effect refrigerant vapor through the second effect is a critical design feature when absorption units operate over a significant range of cooling capacity. The model was used to predict the performance of the Trane absorption unit with fairly good accuracy.

  16. [Treatment of cetyltrimethyl ammonium bromide wastewater by potassium ferrate].

    PubMed

    Yang, Wei-hua; Wang, Hong-hui; Zeng, Xiao-xu; Huang, Ting-ting

    2009-08-15

    A novel oxidant potassium ferrate (K2FeO4) was used to remove cetyltrimethyl ammonium bromide (CTAB) at room temperature. The effects of various conditions on the removal ratio, such as reaction time, dosing quantity of K2FeO4 and initial pH, were investigated. The experiments results show that the removal ratio reaches 79.4% when the reaction time is 30 min, the dosing quantity of K2FeO4 to CTAB is 1:1, the initial pH of the solution is 7. In the reaction progress, the oxidation of K2FeO4 and the flocculation of the reduction product have synergistic effect on the removal of CTAB. In addition, infrared spectra of CTAB before and after being treated with K2FeO4 were further studied. The results indicate that the degradation process involves the interruption of chain and the subsequent mineralization to inorganic molecules. Furthermore, the reaction of K2FeO4 and CTAB follows second order kinetics law.

  17. Reactive films for mitigating methyl bromide emissions from fumigated soil.

    PubMed

    Xuan, Richeng; Ashworth, Daniel J; Luo, Lifang; Yates, Scott R

    2011-03-15

    Emissions of methyl bromide (MeBr) from agricultural fumigation can lead to depletion of the stratospheric ozone layer, and so its use is being phased out. However, as MeBr is still widely used under Critical Use Exemptions, strategies are still required to control such emissions. In this work, novel reactive films (RFs) were designed and their efficacy in limiting loss of MeBr from soil was tested. A reactive layer, containing dry ammonium thiosulfate (ATS), was sandwiched between two layers of plastic film, the lower layer being HDPE (high-density polyethylene film, which is permeable to MeBr) and the upper layer HDPE or VIF (virtually impermeable film). MeBr diffusion through, and transformation by, the RFs were tested in a stainless-steel permeability cell. Although ineffective when dry, the RFs substantially depleted MeBr when activated with water to produce ATS solution. MeBr half-life (t(1/2)) was around 9.0 h at 20 °C in the presence of activated RF, and was sensitive to temperature (t(1/2) 15.7 and 2.9 h at 10 and 40 °C, respectively). When the upper film layer was VIF, less than 0.15% of the added MeBr diffused through the film, with the remainder being transformed within the reactive layer. These findings indicate that such films have good potential to reduce MeBr loss from fumigated soils to the atmosphere.

  18. Evaluation of Alkali Bromide Salts for Potential Pyrochemical Applications

    SciTech Connect

    Prabhat K. Tripathy; Steven D. Herrmann; Guy L. Fredrickson; Tedd E. Lister; Toni Y. Gutknecht

    2013-10-01

    Transient techniques were employed to study the electrochemical behavior, reduction mechanism and transport properties of REBr3 (RE - La, Nd and Gd) in pure LiBr, LiBr-KBr (eutectic) and LiBr-KBr-CsBr (eutectic) melts. Gd(III) showed a reversible single step soluble-insoluble exchange phenomenon in LiBr melt at 973K. Although La (III), Nd(III) and Gd(III) ions showed reversible behavior in eutectic LiBr-KBr melts, these ions showed a combination of temperature dependent reversible and pseudo-reversible behavior. While both La(III) and Gd(III) showed one step reduction, the reduction of Nd(III) was observed to be a two step process. La metal could be electrodeposited from the ternary electrolyte at a temperature of 673K. Various electrochemical measurements suggest that both binary and ternary bromide melts can potentially be used to electrodeposit high purity RE metals at comparatively lower operating temperatures.

  19. Associated anisotropy decays of ethidium bromide interacting with DNA

    NASA Astrophysics Data System (ADS)

    Chib, Rahul; Raut, Sangram; Sabnis, Sarika; Singhal, Preeti; Gryczynski, Zygmunt; Gryczynski, Ignacy

    2014-03-01

    Ethidium Bromide (EB) is a commonly used dye in a deoxyribonucleic acid (DNA) study. Upon an intercalation, this dye significantly increases its brightness and fluorescence lifetime. In this report we have studied the time resolved fluorescence properties of EB existing simultaneously in free and DNA-bound forms in the solution. Fluorescence intensity decays were fitted globally to a double exponential model with lifetimes corresponding to free (1.6 ns) and bound (22 ns) forms, and molar fractions were determined for all used solutions. Anisotropy decays displayed characteristic time dependence with an initial rapid decline followed by recovery and slow decay. The short-lived fraction associated with free EB molecules decreases faster than long-lived fraction associated with EB bound to DNA. Consequently, contribution from fast rotation leads to initial rapid decay in anisotropy. On the other hand bound fraction, due to slow rotation helps recover anisotropy in time. This effect of associated anisotropy decays in systems such as EB free/EB-DNA is clearly visible in a wide range of concentrations, and should be taken into account in polarization assays and biomolecule dynamics studies.

  20. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices

    PubMed Central

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S.; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-01-01

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55–65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2′,2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m2, while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature. PMID:27827424

  1. High brightness formamidinium lead bromide perovskite nanocrystal light emitting devices

    NASA Astrophysics Data System (ADS)

    Perumal, Ajay; Shendre, Sushant; Li, Mingjie; Tay, Yong Kang Eugene; Sharma, Vijay Kumar; Chen, Shi; Wei, Zhanhua; Liu, Qing; Gao, Yuan; Buenconsejo, Pio John S.; Tan, Swee Tiam; Gan, Chee Lip; Xiong, Qihua; Sum, Tze Chien; Demir, Hilmi Volkan

    2016-11-01

    Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead bromide CH(NH2)2PbBr3 (FAPbBr3) colloidal nanocrystals (NC) having high photoluminescence quantum efficiency (PLQE) of 55–65% is reported. In addition, we demonstrate high brightness perovskite light emitting device (Pe-LED) with these FAPbBr3 perovskite NC thin film using 2,2‧,2″-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) commonly known as TPBi and 4,6-Bis(3,5-di(pyridin-3-yl)phenyl)-2-methylpyrimidine (B3PYMPM) as electron transport layers (ETL). The Pe-LED device with B3PYMPM as ETL has bright electroluminescence of up to 2714 cd/m2, while the Pe-LED device with TPBi as ETL has higher peak luminous efficiency of 6.4 cd/A and peak luminous power efficiency of 5.7 lm/W. To our knowledge this is the first report on high brightness light emitting device based on CH(NH2)2PbBr3 widely known as FAPbBr3 nanocrystals in literature.

  2. CHLORPYRIFOS TRANSFORMATION BY AQUEOUS CHLORINE IN THE PRESENCE OF BROMIDE AND NATURAL ORGANIC MATTER

    EPA Science Inventory

    The aqueous chlorination of chlorpyrifos (CP) was investigated in the presence of bromide and natural organic matter (NOM), which were identified as naturally occurring aqueous constituents that could impact CP transformation rates to the toxic product chlorpyrifos oxon (CPO). Br...

  3. Palladium-catalyzed carbonylation reaction of aryl bromides with 2-hydroxyacetophenones to form flavones.

    PubMed

    Wu, Xiao-Feng; Neumann, Helfried; Beller, Matthias

    2012-10-01

    Flavone of the month: a general and efficient method for the palladium-catalyzed carbonylative synthesis of flavones has been developed. Starting from aryl bromides and 2-hydroxyacetophenones, the corresponding flavones have been isolated in good yields.

  4. BROMIDE'S EFFECT ON DBP FORMATION, SPECIATION, AND CONTROL: PART 1, OZONATION

    EPA Science Inventory

    The effect of variable ozone dosage and bromide concentration on the formation of organic disinfection byproducts (DBPs) and bromate were evaluated. Low ozone dosages resulted in oxidation of organic precursors, yielding decreases in the formation potential for total trihalometha...

  5. Stabilized thallium bromide radiation detectors and methods of making the same

    SciTech Connect

    Leao, Cedric Rocha; Lordi, Vincenzo

    2015-11-24

    According to one embodiment, a crystal includes thallium bromide (TlBr), one or more positively charged dopants, and one or more negatively charged dopants. According to another embodiment, a system includes a monolithic crystal including thallium bromide (TlBr), one or more positively charged dopants, and one or more negatively charged dopants; and a detector configured to detect a signal response of the crystal.

  6. Influence of bromide on the performance of the amphipod Hyalella azteca in reconstituted waters

    USGS Publications Warehouse

    Ivey, Chris D.; Ingersoll, Christopher G.

    2016-01-01

    Poor performance of the amphipod Hyalella azteca has been observed in exposures using reconstituted waters. Previous studies have reported success in H. azteca water-only exposures with the addition of relatively high concentrations of bromide. The present study evaluated the influence of lower environmentally representative concentrations of bromide on the response ofH. azteca in 42-d water-only exposures. Improved performance of H. azteca was observed in reconstituted waters with >0.02 mg Br/L.

  7. Small airways ventilation heterogeneity and hyperinflation in COPD: response to tiotropium bromide.

    PubMed

    Verbanck, Sylvia; Schuermans, Daniël; Vincken, Walter

    2007-01-01

    In chronic obstructive pulmonary disease (COPD) patients tiotropium bromide has been shown to improve forced expiratory volume in one second (FEV1) and inspiratory capacity (IC). We investigated whether the mechanism leading to these improvements is related to small airways ventilation heterogeneity, assessed by multiple breath washout tests. Forty stable tiotropium-free COPD patients (FEV1: 27%-78% predicted) were studied before and 90 min after administration of tiotropium bromide on visit0, and following 3 and 6 weeks of tiotropium bromide treatment (visit3wks, visit6wks). After study completion, COPD patients were classified into two subgroups according to degree of hyperinflation at visit0 (Hyp-, Hyp+). The Hyp+ group showed significant increases in trough (ie, pre-dose) FEV1 and IC after 3 and 6 weeks of tiotropium bromide, and the 90 min tiotropium bromide responses of FEV1 and IC were significant at visit0 (p < or = 0.001 for both) but not during subsequent visits. The Hyp- group showed significant FEV1 increases 90 min after tiotropium bromide on all three visits (all p < 0.005) but no sustained increase in trough values. In both COPD subgroups, the grossly abnormal ventilation heterogeneity barely showed any significant improvements with tiotropium bromide in the conductive airways (without changes in trough value) and no changes at all in the acinar airways. We conclude that the sustained improvements in trough IC and FEV1 with tiotropium bromide predominantly observed in COPD patients with considerable hyperinflation, are unrelated to small airways ventilation heterogeneity.

  8. Flow Boiling Heat Transfer to Lithium Bromide Aqueous Solution in Subcooled Region

    NASA Astrophysics Data System (ADS)

    Furukawa, Masahiro; Kaji, Masao; Nishizumi, Takeharu; Ozaki, Shinji; Sekoguchi, Kotohiko

    To improve the thermal performance of high temperature generator of absorption chiller/heater, heat transfer characteristics of flow boiling of lithium bromide aqueous solution in the subcooled region were experimentally investigated. Experiments were made for water and lithium bromide aqueous solution flowing in a rectangular channel (5 mm × 20 mm cross section) with one side wall heated. Boiling onset quality of lithium bromide aqueous solution is greater than that of water. The heat transfer coefficient of lithium bromide aqueous solution is about a half of that of water under the same experimental conditions of inlet velocity and heat flux. The experimental data of heat transfer coefficient for water are compared with the empirical correlation of Thom et al.11) and a fairly good agreement is obtained. The predictive calculations by the method of Sekoguchi et al.12) are compared with the data for water and lithium bromide aqueous solution. Agreement between them is good for water, while the results for lithium bromide aqueous solution are not satisfactory.

  9. Preferential bromide and pesticide movement to tile drains under different cropping practices.

    PubMed

    Fortin, J; Gagnon-Bertrand, E; Vézina, L; Rompré, M

    2002-01-01

    Subsurface drainage systems are useful tools to study chemical leaching in soils. Our objective was to compare the breakthrough behavior of bromide, atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamid] to tile drains under two fall tillage practices (conventional tillage [CT] with a moldboard plow, and reduced tillage [RT] with a chisel plow) in field plots cultivated with corn (Zea mays L.). Leachate volume were greater in RT than in CT, with no statistical differences. Soil analysis showed that bromide migrated deeper in the soil profile than both herbicides, with little tillage effect. All chemicals were detected in drainage water at the same time and followed an event-driven behavior. Tillage had no effect on atrazine and metolachlor found in drainage water, while bromide concentration peaks were higher in RT than in CT in 1999. Concentration peaks were recorded earlier for atrazine and metolachlor than for bromide. Plots of cumulative relative chemical mass (cumulative mass divided by total mass measured in drainage) as a function of cumulative drainage were mostly linear for bromide, while they were S-shaped for both herbicides. Drainage that corresponded to 50% of relative cumulative mass ranged from 40 to 55% for bromide and from 5 to 28% for both herbicides. Rapid chemical movement to tile drains suggested that preferential flow was important in both CT and RT, and that these tillage practices had little influence on this phenomena.

  10. Dicationic alkylammonium bromide gemini surfactants. Membrane perturbation and skin irritation.

    PubMed

    Almeida, João A S; Faneca, Henrique; Carvalho, Rui A; Marques, Eduardo F; Pais, Alberto A C C

    2011-01-01

    Dicationic alkylammonium bromide gemini surfactants represent a class of amphiphiles potentially effective as skin permeation enhancers. However, only a limited number of studies has been dedicated to the evaluation of the respective cytotoxicity, and none directed to skin irritation endpoints. Supported on a cell viability study, the cytotoxicity of gemini surfactants of variable tail and spacer length was assessed. For this purpose, keratinocyte cells from human skin (NCTC 2544 cell line), frequently used as a model for skin irritation, were employed. The impact of the different gemini surfactants on the permeability and morphology of model vesicles was additionally investigated by measuring the leakage of calcein fluorescent dye and analyzing the NMR spectra of ³¹P, respectively. Detail on the interaction of gemini molecules with model membranes was also provided by a systematic differential scanning calorimetry (DSC) and molecular dynamics (MD) simulation. An irreversible impact on the viability of the NCTC 2544 cell line was observed for gemini concentrations higher than 25 mM, while no cytotoxicity was found for any of the surfactants in a concentration range up to 10 mM. A higher cytotoxicity was also found for gemini surfactants presenting longer spacer and shorter tails. The same trend was obtained in the calorimetric and permeability studies, with the gemini of longest spacer promoting the highest degree of membrane destabilization. Additional structural and dynamical characterization of the various systems, obtained by ³¹P NMR and MD, provide some insight on the relationship between the architecture of gemini surfactants and the respective perturbation mechanism.

  11. Silica nanoparticles separation from water: aggregation by cetyltrimethylammonium bromide (CTAB).

    PubMed

    Liu, Y; Tourbin, M; Lachaize, S; Guiraud, P

    2013-07-01

    Nanoparticles will inevitably be found in industrial and domestic wastes in the near future and as a consequence soon in water resources. Due to their ultra-small size, nanoparticles may not only have new hazards for environment and human health, but also cause low separation efficiency by classical water treatments processes. Thus, it would be an important challenge to develop a specific treatment with suitable additives for recovery of nanoparticles from waters. For this propose, this paper presents aggregation of silica nanoparticles (Klebosol 30R50 (75nm) and 30R25 (30nm)) by cationic surfactant cetyltrimethylammonium bromide (CTAB). Different mechanisms such as charge neutralization, "depletion flocculation" or "volume-restriction", and "hydrophobic effect" between hydrocarbon tails of CTAB have been proposed to explicate aggregation results. One important finding is that for different volume concentrations between 0.05% and 0.51% of 30R50 suspensions, the same critical coagulation concentration was observed at CTAB=0.1mM, suggesting the optimized quantity of CTAB during the separation process for nanoparticles of about 75nm. Furthermore, very small quantities of CTAB (0.01mM) can make 30R25 nanosilica aggregated due to the "hydrophobic effect". It is then possible to minimize the sludge and allow the separation process as "greener" as possible by studying this case. It has also shown that aggregation mechanisms can be different for very small particles so that a special attention has to be paid to the treatment of nanoparticles contained in water and wastewaters.

  12. Dicationic Alkylammonium Bromide Gemini Surfactants. Membrane Perturbation and Skin Irritation

    PubMed Central

    Almeida, João A. S.; Faneca, Henrique; Carvalho, Rui A.; Marques, Eduardo F.; Pais, Alberto A. C. C.

    2011-01-01

    Dicationic alkylammonium bromide gemini surfactants represent a class of amphiphiles potentially effective as skin permeation enhancers. However, only a limited number of studies has been dedicated to the evaluation of the respective cytotoxicity, and none directed to skin irritation endpoints. Supported on a cell viability study, the cytotoxicity of gemini surfactants of variable tail and spacer length was assessed. For this purpose, keratinocyte cells from human skin (NCTC 2544 cell line), frequently used as a model for skin irritation, were employed. The impact of the different gemini surfactants on the permeability and morphology of model vesicles was additionally investigated by measuring the leakage of calcein fluorescent dye and analyzing the NMR spectra of 31P, respectively. Detail on the interaction of gemini molecules with model membranes was also provided by a systematic differential scanning calorimetry (DSC) and molecular dynamics (MD) simulation. An irreversible impact on the viability of the NCTC 2544 cell line was observed for gemini concentrations higher than 25 mM, while no cytotoxicity was found for any of the surfactants in a concentration range up to 10 mM. A higher cytotoxicity was also found for gemini surfactants presenting longer spacer and shorter tails. The same trend was obtained in the calorimetric and permeability studies, with the gemini of longest spacer promoting the highest degree of membrane destabilization. Additional structural and dynamical characterization of the various systems, obtained by 31P NMR and MD, provide some insight on the relationship between the architecture of gemini surfactants and the respective perturbation mechanism. PMID:22102870

  13. The fate of alternative soil fumigants to methyl bromide

    NASA Astrophysics Data System (ADS)

    Qin, R.; Gao, S.

    2011-12-01

    Soil fumigation is an important agricultural practice for the control of soil-borne pests. Since the phase-out of methyl bromide, due to its role in the depletion of stratospheric ozone, several alternatives such as 1,3-dichloropropene (1,3-D), chloropicrin (CP), and dimethyl disulfide (DMDS) are being increasingly used. The major processes and factors affecting the fate of these chemicals are evaluated. The high volatility of fumigants leads to high emission loss when no proper containment is used. Recent tarping technology using low permeability films can significantly reduce emissions. Fumigant degradation rate becomes critical to the determination of fumigation rate that affects efficacy and residence time in soil. A series of laboratory incubation experiments were carried out to determine degradation rate of 1,3-D isomers, CP and DMDS in five different soils collected from California and Florida. Fumigant degradation rates depend highly on the amounts of fumigants in soil, chemical characteristics, and soil conditions. Fumigant degradation rate were found to increase for all fumigants as the fumigant amounts in soil decreased. The changes were smaller for 1,3-D isomers compared to CP and DMDS. In soils with the lowest application rate, the degradation rate of fumigants is in the order of CP > DMDS > cis-1,3-D > trans-1,3-D. Soil and environmental factors also affect fumigant degradation rate. These findings suggest that a proper application rate should be determined for specific fumigants in a soil when using low permeability tarp in order to achieve sufficient fumigation efficacy during a certain period of time while minimizing potential surge of emissions after tarp removal and/or long residence time in soil that may cause phytotoxicity or leaching.

  14. Predicting bromide incorporation in a chlorinated indoor swimming pool.

    PubMed

    Chowdhury, Shakhawat; Mazumder, Abu Jafar; Husain, Tahir

    2016-06-01

    The water in and air above swimming pools often contain high levels of disinfection byproducts (DBPs) due to chemical reactions between chlorine- or bromine-based disinfectants and organic/inorganic matter in the source water and released from swimmers. Exposure to these DBPs, though inevitable, can pose health threats to humans. In this study, DBPs in tap water (S1), and water from a chlorinated indoor swimming pool before (S2) and after swimming (S3) were measured. The brominated species constituted the majority of DBPs formed in S1, S2, and S3. Trihalomethanes (THMs) in S3 was 6.9 (range 2.9-11.1) and 1.4 (range 0.52-2.9) times those in S1 and S2, respectively; and the haloacetic acids (HAAs) in S3 was 4.2 (range 2.5-7.5) and 1.2 (range 0.6-2.6) times those in S1 and S2, respectively. The mean THMs in air above the swimming pool before (S2-A) and after swimming (S3-A) were 72.2 and 93.0 μg/m(3), respectively, and their ranges were 36.3-105.8 and 44.1-133.6 μg/m(3), respectively. The average percentages of bromide incorporation (BI) into THMs in S1, S2, and S3 were 3.0, 9.3, and 10.6 %, respectively; and the BI into HAAs in S1, S2, and S3 were 6.6, 12.0, and 12.2 %, respectively. Several models were trained for predicting the BI into THMs and HAAs. The results indicate that additional information is required to develop predictive models for BI in swimming pools.

  15. Bacterial oxidation of methyl bromide in fumigated agricultural soils

    USGS Publications Warehouse

    Miller, L.G.; Connell, T.L.; Guidetti, J.R.; Oremland, R.S.

    1997-01-01

    The oxidation of [14C]methyl bromide ([14C]MeBr) to 14CO2 was measured in field experiments with soils collected from two strawberry plots fumigated with mixtures of MeBr and chloropicrin (CCI3NO2). Although these fumigants are considered potent biocides, we found that the highest rates of MeBr oxidation occurred 1 to 2 days after injection when the fields were tarped, rather than before or several days after injection. No oxidation of MeBr occurred in heat-killed soils, indicating that microbes were the causative agents of the oxidation. Degradation of MeBr by chemical and/or biological processes accounted for 20 to 50% of the loss of MeBr during fumigation, with evasion to the atmosphere inferred to comprise the remainder. In laboratory incubations, complete removal of [14C]MeBr occurred within a few days, with 47 to 67% of the added MeBr oxidized to 14CO2 and the remainder of counts associated with the solid phase. Chloropicrin inhibited the oxidation of MeBr, implying that use of this substance constrains the extent of microbial degradation of MeBr during fumigation. Oxidation was by direct bacterial attack of MeBr and not of methanol, a product of the chemical hydrolysis of MeBr. Neither nitrifying nor methane-oxidizing bacteria were sufficiently active in these soils to account for the observed oxidation of MeBr, nor could the microbial degradation of MeBr be linked to cooxidation with exogenously supplied electron donors. However, repeated addition of MeBr to live soils resulted in higher rates of its removal, suggesting that soil bacteria used MeBr as an electron donor for growth. To support this interpretation, we isolated a gram-negative, aerobic bacterium from these soils which grew with MeBr as a sole source of carbon and energy.

  16. Eudragit RS PO nanoparticles for sustained release of pyridostigmine bromide

    NASA Astrophysics Data System (ADS)

    Hoobakht, Fatemeh; Ganji, Fariba; Vasheghani-Farahani, Ebrahim; Mousavi, Seyyed Mohammad

    2013-09-01

    Pyridostigmine bromide (PB) is an inhibitor of cholinesterase, which is used in the treatment of myasthenia gravis and administered for protection against exposure to toxic nerve agents. Tests were done to investigate prolonging the half-life of PB and improving its release behavior. PB was loaded in nanoparticles (NPs) of Eudragit RS PO (Eu-RS) prepared using the technique of quasi emulsion solvent diffusion. Variables of output power of the sonicator, bath temperature and mixing time, were chosen as the optimization factors to obtain the minimum sized NPs. In addition, emulsions were tested at different ratios of drug-to-polymer by dynamic light scattering to determine size and zeta potential of NPs. UV-spectroscopy was used to determine PB content of the NPs. Drug-loaded NPs were characterized by scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectra. Results determined that mixing time had a significant impact on the size of Eu-RS NPs, but power output of sonicator and bath temperature had no significant effect. The particle size obtained at the optimum condition (power output of 70 W, bath temperature of 33 °C, and mixing time of 7 min) was less than 200 nm (optimum sizes were 138.9 and 179.5 nm for Eu-RS and PB-loaded Eu-RS NPs, respectively). The optimum PB-loaded Eu-RS NPs at the PB to Eu-RS weight ratio of 1-4 and 20 % of loaded PB released from the nanocarriers within 100 h.

  17. Clinical potential of aclidinium bromide in chronic obstructive pulmonary disease

    PubMed Central

    Jones, Paul W

    2015-01-01

    Three long-acting muscarinic antagonists (LAMAs) are now available in Europe, providing clinicians and patients with a choice of interventions, which is important in COPD, which is clinically a heterogeneous disease. The first LAMA, tiotropium, has been widely used over the last decade as a once-daily maintenance therapy in stable COPD to improve patients’ health-related quality of life and to reduce the risk of exacerbations. Administered via the HandiHaler® device, it is safe and well tolerated. Another new once-daily LAMA, glycopyrronium, has also been shown to improve health status and reduce exacerbations, and is well tolerated. The subject of this review is a third LAMA, aclidinium bromide, which was approved as a twice-daily maintenance bronchodilator treatment. In the pivotal Phase III clinical trials, patients receiving aclidinium achieved significantly greater improvements in lung function, reductions in breathlessness, and improvements in health status compared with placebo, for up to 24 weeks. In continuation studies, these improvements were sustained for up to 52 weeks. Pooled data showed exacerbation frequency was significantly reduced with aclidinium versus placebo. Preclinical and pharmacological studies demonstrating low systemic bioavailability and a low propensity to induce cardiac arrhythmias were translated into a favorable tolerability profile in the clinical trial program – the adverse event profile of aclidinium was similar to placebo, with a low incidence of anticholinergic and cardiac adverse events. While additional studies are needed to evaluate its full clinical potential, aclidinium is an important part of this recent expansion of LAMA therapeutic options, providing clinicians and patients with an effective and well-tolerated COPD treatment. PMID:25848244

  18. Carbon isotope fractionation of methyl bromide during agricultural soil fumigations

    USGS Publications Warehouse

    Bill, M.; Miller, L.G.; Goldstein, Allen H.

    2002-01-01

    The isotopic composition of methyl bromide (CH3Br) has been suggested to be a potentially useful tracer for constraining the global CH3Br budget. In order to determine the carbon isotopic composition of CH3Br emitted from the most significant anthropogenic application (pre-plant fumigation) we directly measured the ??13C of CH3Br released during commercial fumigation. We also measured the isotopic fractionation associated with degradation in agricultural soil under typical field fumigation conditions. The isotopic composition of CH3Br collected in soil several hours after injection of the fumigant was -44.5??? and this value increased to -20.7??? over the following three days. The mean kinetic isotope effect (KIE) associated with degradation of CH3Br in agricultural soil (12???) was smaller than the reported value for methylotrophic bacterial strain IMB-1, isolated from previously fumigated agricultural soil, but was similar to methylotrophic bacterial strain CC495, isolated from a pristine forest litter zone. Using this fractionation associated with the degradation of CH3Br in agricultural soil and the mean ??13C of the industrially manufactured CH3Br (-54.4???), we calculate that the agricultural soil fumigation source has a carbon isotope signature that ranges from -52.8??? to -42.0???. Roughly 65% of industrially manufactured CH3Br is used for field fumigations. The remaining 35% is used for structural and post-harvest fumigations with a minor amount used during industrial chemical manufacturing. Assuming that the structural and post-harvest fumigation sources of CH3Br are emitted without substantial fractionation, we calculate that the ??13C of anthropogenically emitted CH3Br ranges from -53.2??? to -47.5???.

  19. Inhalable Ipratropium Bromide Particle Engineering with Multicriteria Optimization.

    PubMed

    Vinjamuri, Bhavani Prasad; Haware, Rahul V; Stagner, William C

    2016-11-21

    Spray-dried ipratropium bromide (IPB) microspheres for oral inhalation were engineered using Quality by Design. The interrogation of material properties, process parameters, and critical product quality attributes interplay enabled rational product design. A 2(7-3) screening design exhibited the Maillard reaction between L-leucine (LL) and lactose at studied outlet temperatures (OT) >130°C. A response surface custom design was used in conjunction with multicriteria optimization to determine the operating design space to achieve inhalable microparticles. Statistically significant predictive models were developed for volume median diameter (p = 0.0001, adjusted R (2)  = 0.9938), span (p = 0.0278, adjusted R (2)  = 0.7912), yield (p = 0.0020, adjusted R (2)  = 0.9320), and OT (p = 0.0082, adjusted R (2)  = 0.8768). An independent verification batch confirmed the model's predictive capability. The prediction and actual values were in good agreement. Particle size and span were 3.32 ± 0.09 μm and 1.71 ± 0.18, which were 4.7 and 5.3% higher than the predicted values. The process yield was 50.3%, compared to the predicted value of 65.3%. The OT was 100°C versus the predicted value of 105°C. The label strength of IPB microparticles was 99.0 to 105.9% w/w suggesting that enrichment occurred during the spray-drying process. The present study can be utilized to initiate the design of the first commercial IPB dry powder inhaler.

  20. Depleting methyl bromide residues in soil by reaction with bases.

    PubMed

    Xuan, Richeng; Ashworth, Daniel J; Luo, Lifang; Wang, Haizhen; Yates, Scott R

    2010-12-01

    Despite generally being considered the most effective soil fumigant, methyl bromide (MeBr) use is being phased out because its emissions from soil can lead to stratospheric ozone depletion. However, a large amount is still currently used due to Critical Use Exemptions. As strategies for reducing the postfumigation emissions of MeBr from soil, Ca(OH)(2), K(2)CO(3), and NH(3) were assessed as means of promoting MeBr degradation. Ammonia aqueous solution (NH(4)OH) was the most effective, because MeBr can be degraded by both hydrolysis and ammonolysis. At 20 °C, the half-lives (t(1/2)) of MeBr were 18.0, 2.5, and 1.3 h in 0.1, 1.0, and 2.0 M NH(4)OH, respectively. In 1.0 M NH(4)OH, increasing the solution temperature to 40 °C reduced the half-life of MeBr to 0.23 h. Ammonia amendment to moist soil also promoted MeBr transformation, and the MeBr degradation rate increased with increasing soil temperature. NH(4)OH (30%, 16 M) very effectively reacted with MeBr that was contained under plastic film. Under Hytibar (a virtually impermeable film, VIF), over 99.5% of the MeBr could be destroyed by 30% NH(4)OH in 8 h at 20 °C. On the basis of these results, good management practices (i.e., VIF plus NH(4)OH) could be developed for continued use of MeBr as a soil fumigant under Critical Use Exemptions, without significant emissions.

  1. Tiotropium bromide inhalation powder: a review of its use in the management of chronic obstructive pulmonary disease.

    PubMed

    Keating, Gillian M

    2012-01-22

    The anticholinergic agent tiotropium bromide (Spiriva®) is a long-acting bronchodilator that is indicated for the treatment of chronic obstructive pulmonary disease (COPD). This article reviews the clinical efficacy and tolerability of tiotropium bromide inhalation powder, administered using the HandiHaler® device, in patients with COPD, as well as reviewing its pharmacological properties and the results of pharmacoeconomic analyses. Shorter-term placebo-controlled trials in patients with COPD demonstrated significantly higher trough forced expiratory volume in 1 second (FEV(1)) responses with tiotropium bromide than with placebo, confirming it has a duration of action of ≥24 hours and is suitable for once-daily administration. Lung function improved to a greater extent with tiotropium bromide than with ipratropium bromide or, in most instances, salmeterol. Indacaterol was shown to be noninferior to tiotropium bromide in terms of the trough FEV(1) response. The large, 4-year UPLIFT® trial did not show a significant reduction in the annual rate of decline in FEV(1) with tiotropium bromide versus placebo in patients with COPD, although subgroup analyses demonstrated a significantly lower rate of decline with tiotropium bromide than with placebo in some patient groups (e.g. patients with moderate COPD, patients aged ≥50 years, patients not receiving maintenance therapy at baseline). Tiotropium bromide prevented exacerbations in patients with COPD, with a significantly lower exacerbation rate and a significantly longer time to first exacerbation seen with tiotropium bromide than with placebo or salmeterol. Exacerbation rates did not significantly differ between patients receiving tiotropium bromide and those receiving salmeterol/fluticasone propionate. Tiotropium bromide also had beneficial effects on health-related quality of life (HR-QOL) and other endpoints, such as dyspnoea and rescue medication use. Combination therapy with tiotropium bromide plus

  2. Chlorine-36, bromide, and the origin of spring water

    USGS Publications Warehouse

    Davis, S.N.; Cecil, L.D.; Zreda, M.; Moysey, S.

    2001-01-01

    Natural ratios of chlorine-36 (36Cl) to stable chlorine (i.e., 36Cl/Cl ?? 10-15) vary in shallow groundwater of the United States from about 50 in coastal areas to about 1400 in the northern Rocky Mountains. Ratios lower than these indicate the presence of chloride (Cl-) that has been isolated from the atmosphere for hundreds of thousands of years, if not longer. Higher ratios, which can exceed 5000, usually originate from fallout from testing thermonuclear devices in the western Pacific in the 1950s. Natural mass ratios of chloride to bromide (Cl-/Br-) in precipitation vary in the United States from about 250 in coastal areas to about 50 in the north-central states. Lower ratios may suggest contamination from human sources. Higher ratios, which may exceed 2000, commonly reflect the dissolution of halite. Seawater has a Cl-/Br- ratio of 290. Both 36Cl and Cl-/Br- ratios have been measured in 21 samples of spring water collected from springs in 10 different states. Brackish water from Saratoga Springs area in New York has low values for both 36Cl and Cl-/Br- ratios. This indicates that a large component of the water has a very deep origin. Brackish water from Alexander Springs in Florida has a low 36Cl ratio but a high Cl-/Br- ratio similar to seawater. This suggests the addition of ancient seawater that may be trapped in the aquifer. Big Spring in Iowa discharges water with a very high Cl-/Br- ratio but a moderate 36Cl ratio. The high ratio of Cl-/Br- may be produced by dissolution of road salt or agricultural chemicals. Of the 21 springs sampled, only 10 appeared to have potable water not significantly affected by human activity. Chlorine-36 from testing of nuclear devices is still being flushed out of four of the spring systems that were sampled. Thus, more than 45 years have passed since 36Cl was introduced into the aquifers feeding the springs and the systems, as yet, have not been purged. Published by Elsevier Science B.V.

  3. Bromine and bromide content in soils: Analytical approach from total reflection X-ray fluorescence spectrometry.

    PubMed

    Gallardo, Helena; Queralt, Ignasi; Tapias, Josefina; Candela, Lucila; Margui, Eva

    2016-08-01

    Monitoring total bromine and bromide concentrations in soils is significant in many environmental studies. Thus fast analytical methodologies that entail simple sample preparation and low-cost analyses are desired. In the present work, the possibilities and drawbacks of low-power total reflection X-ray fluorescence spectrometry (TXRF) for the determination of total bromine and bromide contents in soils were evaluated. The direct analysis of a solid suspension using 20 mg of fine ground soil (<63 μm) gave a 3.7 mg kg(-1) limit of detection for bromine which, in most cases, was suitable for monitoring total bromine content in soils (Br content range in soils = 5-40 mg kg(-1)). Information about bromide determination in soils is also possible by analyzing the Br content in water soil extracts. In this case, the TXRF analysis can be directly performed by depositing 10 μL of the internal standardized soil extract sample on a quartz glass reflector in a measuring time of 1500 s. The bromide limit of detection by this approach was 10 μg L(-1). Good agreement was obtained between the TXRF results for the total bromine and bromide determinations in soils and those obtained by other popular analytical techniques, e.g. energy dispersive X-ray fluorescence spectrometry (total bromine) and ionic chromatography (bromide). As a study case, the TXRF method was applied to study bromine accumulation in two agricultural soils fumigated with a methyl bromide pesticide and irrigated with regenerated waste water.

  4. Characterization of soluble bromide measurements and a case study of BrO observations during ARCTAS

    NASA Astrophysics Data System (ADS)

    Liao, J.; Huey, L. G.; Scheuer, E.; Dibb, J. E.; Stickel, R. E.; Tanner, D. J.; Neuman, J. A.; Nowak, J. B.; Choi, S.; Wang, Y.; Salawitch, R. J.; Canty, T.; Chance, K.; Kurosu, T.; Suleiman, R.; Weinheimer, A. J.; Shetter, R. E.; Fried, A.; Brune, W.; Anderson, B.; Zhang, X.; Chen, G.; Crawford, J.; Hecobian, A.; Ingall, E. D.

    2012-02-01

    A focus of the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) mission was examination of bromine photochemistry in the spring time high latitude troposphere based on aircraft and satellite measurements of bromine oxide (BrO) and related species. The NASA DC-8 aircraft utilized a chemical ionization mass spectrometer (CIMS) to measure BrO and a mist chamber (MC) to measure soluble bromide. We have determined that the MC detection efficiency to molecular bromine (Br2), hypobromous acid (HOBr), bromine oxide (BrO), and hydrogen bromide (HBr) as soluble bromide (Br-) was 0.9±0.1, 1.06+0.30/-0.35, 0.4±0.1, and 0.95±0.1, respectively. These efficiency factors were used to estimate soluble bromide levels along the DC-8 flight track of 17 April 2008 from photochemical calculations constrained to in situ BrO measured by CIMS. During this flight, the highest levels of soluble bromide and BrO were observed and atmospheric conditions were ideal for the space-borne observation of BrO. The good agreement (R2 = 0.76; slope = 0.95; intercept = -3.4 pmol mol-1) between modeled and observed soluble bromide, when BrO was above detection limit (>2 pmol mol-1) under unpolluted conditions (NO<10 pmol mol-1), indicates that the CIMS BrO measurements were consistent with the MC soluble bromide and that a well characterized MC can be used to derive mixing ratios of some reactive bromine compounds. Tropospheric BrO vertical column densities (BrOVCD) derived from CIMS BrO observations compare well with BrOTROPVCD from OMI on 17 April 2008.

  5. Characterization of soluble bromide measurements and a case study of BrO observations during ARCTAS

    NASA Astrophysics Data System (ADS)

    Liao, J.; Huey, L. G.; Scheuer, E.; Dibb, J. E.; Stickel, R. E.; Tanner, D. J.; Neuman, J. A.; Nowak, J. B.; Choi, S.; Wang, Y.; Salawitch, R. J.; Canty, T.; Chance, K.; Kurosu, T.; Suleiman, R.; Weinheimer, A. J.; Shetter, R. E.; Fried, A.; Brune, W.; Anderson, B.; Zhang, X.; Chen, G.; Crawford, J.; Hecobian, A.; Ingall, E. D.

    2011-09-01

    A focus of the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) mission was examination of bromine photochemistry in the spring time, high latitude troposphere based on aircraft and satellite measurements of BrO and related species. The NASA DC-8 aircraft utilized a chemical ionization mass spectrometry (CIMS) instrument to measure BrO and a mist chamber (MC) to measure soluble bromide. We have determined that the MC detection efficiency to molecular bromine (Br2), hypobromous acid (HOBr), bromine oxide (BrO), and hydrogen bromide (HBr) as soluble bromide (Br-) was 0.9±0.1, 1.06±0.30, 0.4±0.1, and 0.95±0.1, respectively. These efficiency factors were used to estimate soluble bromide levels along the DC-8 flight track of 17 April 2008 from photochemical calculations constrained to in situ BrO measured by CIMS. During this flight, the highest levels of soluble bromide and BrO were observed and atmospheric conditions were ideal for the space-borne observation of BrO. The good agreement (R2 = 0.76; slope = 0.98; intercept = -3.5 pptv) between modeled and observed soluble bromide, when BrO was above detection limit (>2 pptv) under unpolluted conditions (NO < 100 pptv), indicates that the CIMS BrO measurements were consistent with the MC soluble bromide. Tropospheric BrO vertical column densities (BROTROPVCD) derived from CIMS BrO observations compare well with BROTROPVCD from OMI on 17 April 2008.

  6. A novel explicit approach to model bromide and pesticide transport in soils containing macropores

    NASA Astrophysics Data System (ADS)

    Klaus, J.; Zehe, E.

    2011-01-01

    The present study tests whether an explicit treatment of worm burrows is feasible for simulating water flow, bromide and pesticide transport in structured heterogeneous soils. The essence is to represent worm burrows as morphologically connected paths of low flow resistance in the spatially highly resolved model domain. A recent Monte Carlo study (Klaus and Zehe, 2010) revealed that this approach allowed successful reproduction of tile drain event discharge recorded during an irrigation experiment at a tile drained field site. However, several "hillslope architectures" that were all consistent with the available extensive data base allowed a good reproduction of tile drain flow response. Our second objective was thus to find out whether this "equifinality" in spatial model setups may be reduced when including bromide tracer data in the model falsification process. We thus simulated transport of bromide and Isoproturon (IPU) for the 13 spatial model setups, which performed best with respect to reproduce tile drain event discharge, without any further calibration. All model setups allowed a very good prediction of the temporal dynamics of cumulated bromide leaching into the tile drain, while only four of them matched the accumulated water balance and accumulated bromide loss into the tile drain. The number of behavioural model architectures could thus be reduced to four. One of those setups was used for simulating transport of IPU, using different parameter combinations to characterise adsorption according to the Footprint data base. Simulations could, however, only reproduce the observed leaching behaviour, when we allowed for retardation coefficients that were very close to one.

  7. Utility of bromide and heat tracers for aquifer characterization affected by highly transient flow conditions

    NASA Astrophysics Data System (ADS)

    Ma, Rui; Zheng, Chunmiao; Zachara, John M.; Tonkin, Matthew

    2012-08-01

    A tracer test using both bromide and heat tracers conducted at the Integrated Field Research Challenge site in Hanford 300 Area (300A), Washington, provided an instrument for evaluating the utility of bromide and heat tracers for aquifer characterization. The bromide tracer data were critical to improving the calibration of the flow model complicated by the highly dynamic nature of the flow field. However, most bromide concentrations were obtained from fully screened observation wells, lacking depth-specific resolution for vertical characterization. On the other hand, depth-specific temperature data were relatively simple and inexpensive to acquire. However, temperature-driven fluid density effects influenced heat plume movement. Moreover, the temperature data contained "noise" caused by heating during fluid injection and sampling events. Using the hydraulic conductivity distribution obtained from the calibration of the bromide transport model, the temperature depth profiles and arrival times of temperature peaks simulated by the heat transport model were in reasonable agreement with observations. This suggested that heat can be used as a cost-effective proxy for solute tracers for calibration of the hydraulic conductivity distribution, especially in the vertical direction. However, a heat tracer test must be carefully designed and executed to minimize fluid density effects and sources of noise in temperature data. A sensitivity analysis also revealed that heat transport was most sensitive to hydraulic conductivity and porosity, less sensitive to thermal distribution factor, and least sensitive to thermal dispersion and heat conduction. This indicated that the hydraulic conductivity remains the primary calibration parameter for heat transport.

  8. Mepenzolate bromide promotes diabetic wound healing by modulating inflammation and oxidative stress

    PubMed Central

    Zheng, Yongjun; Wang, Xingtong; Ji, Shizhao; Tian, Song; Wu, Haibin; Luo, Pengfei; Fang, He; Wang, Li; Wu, Guosheng; Xiao, Shichu; Xia, Zhaofan

    2016-01-01

    Diabetic wounds are characterized by persistent inflammation and the excessive production of reactive oxygen species, thus resulting in impaired wound healing. Mepenzolate bromide, which was originally used to treat gastrointestinal disorders in clinical settings, has recently been shown to display beneficial effects in chronic obstructive pulmonary disease and pulmonary fibrosis of a mouse model by inhibiting inflammatory responses and reducing oxidative stress. However,the role of mepenzolate bromide in diabetic wound healing is still unclear. In this study, full-thickness excisional skin wounds were created on the backs of db/db mice, and mepenzolate bromide was topically applied to the wound bed. We found that mepenzolate bromide significantly promoted diabetic wound healing by measuring wound closure rate and histomorphometric analyses. Further studies showed that inflammation was inhibited by assessing the number of macrophages and levels of pro-inflammatory cytokines and pro-healing cytokines in the wounds. Furthermore, oxidative stress was reduced by monitoring the levels of MDA and H2O2 and the activities of glutathione peroxidase and catalase in the wounds. These results demonstrated the potential application of mepenzolate bromide for treating diabetic ulcers and other chronic wounds in clinics. PMID:27398156

  9. [Successful lobectomy in 3 lung cancer cases with severe COPD after treatment with tiotropium bromide].

    PubMed

    Matsuyama, Wataru; Suetsugu, Takayuki; Kawabata, Takashi; Kubota, Shingo; Iwakawa, Jun; Higashimoto, Ikkou; Osame, Mitsuhiro; Arimura, Kimiyoshi

    2007-02-01

    It is well known that lung cancer patients with severe chronic obstructive pulmonary disease (COPD) have a higher risk of postoperative complications than patients without COPD. However, the information regarding preoperative treatment to improve pulmonary function of the lung cancer patients with severe COPD is limited. Here, we report 3 lung cancer cases with severe COPD. Although all patients received medication without tiotropium bromide in combination with pulmonary rehabilitation for 1 or 2 months, their pulmonary function did not improve and the predicted postoperative FEV1/predicted FEV1 was below 40% in all cases. After the approval in Japan for use of tiotropium bromide in the treatment of COPD, all patients were treated with tiotropium bromide. The pulmonary function in all patients improved 2-4 weeks after the start of tiotropium bromide, and we performed lobectomy safely. Currently all patients maintain good pulmonary function without recurrence of lung cancer. We propose that treatment of tiotropium bromide might be one of the effective preoperative methods to improve pulmonary function of lung cancer patients with severe COPD.

  10. Rocuronium Bromide Inhibits Inflammation and Pain by Suppressing Nitric Oxide Production and Enhancing Prostaglandin E2 Synthesis in Endothelial Cells

    PubMed Central

    2016-01-01

    Purpose Rocuronium bromide is a nondepolarizing neuromuscular blocking drug and has been used as an adjunct for relaxation or paralysis of the skeletal muscles, facilitation of endotracheal intubation, and improving surgical conditions during general anesthesia. However, intravenous injection of rocuronium bromide induces injection pain or withdrawal movement. The exact mechanism of rocuronium bromide-induced injection pain or withdrawal movement is not yet understood. We investigated whether rocuronium bromide treatment is involved in the induction of inflammation and pain in vascular endothelial cells. Methods For this study, calf pulmonary artery endothelial (CPAE) cells were used, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, Western blot, nitric oxide detection, and prostaglandin E2 immunoassay were conducted. Results Rocuronium bromide treatment inhibited endothelial nitric oxide synthase and suppressed nitric oxide production in CPAE cells. Rocuronium bromide activated cyclooxygenase-2, inducible nitric oxide synthase and increased prostaglandin E2 synthesis in CPAE cells. Conclusions Rocuronium bromide induced inflammation and pain in CPAE cells. Suppressing nitric oxide production and enhancing prostaglandin E2 synthesis might be associated with rocuronium bromide-induced injection pain or withdrawal movement. PMID:28043117

  11. Ionic liquid-assisted separation and determination of selenium species in food and beverage samples by liquid chromatography coupled to hydride generation atomic fluorescence spectrometry.

    PubMed

    Castro Grijalba, Alexander; Fiorentini, Emiliano F; Wuilloud, Rodolfo G

    2017-03-31

    Different ionic liquids (ILs) were assayed as mobile phase modifiers for the separation and determination of selenite [Se(IV)], selenate [Se(VI)], selenomethionine (SeMet) and Se-methylselenocysteine (SeMeSeCys) by reversed-phase high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (RP-HPLC-HG-AFS). The use of several ILs: 1-butyl-3-methylimidazolium chloride, 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), 1-octyl-3-methylimidazolium chloride, 1-dodecyl-3-methylimidazolium bromide, 1-hexadecyl-3-methylimidazolium bromide and tributyl(methyl)phosphonium methylsulphate was evaluated. Also, the effect of pH, buffer type and IL concentration on the separation of Se species was studied. Complete separation was attained within 12min using a C8 column and a gradient performed with a mobile phase containing 0.1% (v/v) [C6mim]Cl at pH 6.0. The proposed method allows the separation of inorganic and organic Se species in a single chromatographic run, adding further benefits over already reported methods based on RP-HPLC. In addition, the influence of ILs on the AFS signals of each Se species was evaluated and a multivariate methodology was used for optimization of AFS sensitivity. The limits of detection were 0.92, 0.86, 1.41 and 1.19μgL(-1) for Se(IV), Se(VI), SeMet and SeMeSeCys, respectively. The method was successfully applied for speciation analysis of Se in complex samples, such as wine, beer, yeast and garlic.

  12. Methyl bromide: ocean sources, ocean sinks, and climate sensitivity.

    PubMed

    Anbar, A D; Yung, Y L; Chavez, F P

    1996-03-01

    The oceans play an important role in the geochemical cycle of methyl bromide (CH3Br), the major carrier of O3-destroying bromine to the stratosphere. The quantity of CH3Br produced annually in seawater is comparable to the amount entering the atmosphere each year from natural and anthropogenic sources. The production mechanism is unknown but may be biological. Most of this CH3Br is consumed in situ by hydrolysis or reaction with chloride. The size of the fraction which escapes to the atmosphere is poorly constrained; measurements in seawater and the atmosphere have been used to justify both a large oceanic CH3Br flux to the atmosphere and a small net ocean sink. Since the consumption reactions are extremely temperature-sensitive, small temperature variations have large effects on the CH3Br concentration in seawater, and therefore on the exchange between the atmosphere and the ocean. The net CH3Br flux is also sensitive to variations in the rate of CH3Br production. We have quantified these effects using a simple steady state mass balance model. When CH3Br production rates are linearly scaled with seawater chlorophyll content, this model reproduces the latitudinal variations in marine CH3Br concentrations observed in the east Pacific Ocean by Singh et al. [1983] and by Lobert et al. [1995]. The apparent correlation of CH3Br production with primary production explains the discrepancies between the two observational studies, strengthening recent suggestions that the open ocean is a small net sink for atmospheric CH3Br, rather than a large net source. The Southern Ocean is implicated as a possible large net source of CH3Br to the atmosphere. Since our model indicates that both the direction and magnitude of CH3Br exchange between the atmosphere and ocean are extremely sensitive to temperature and marine productivity, and since the rate of CH3Br production in the oceans is comparable to the rate at which this compound is introduced to the atmosphere, even small

  13. Methyl bromide: ocean sources, ocean sinks, and climate sensitivity

    NASA Technical Reports Server (NTRS)

    Anbar, A. D.; Yung, Y. L.; Chavez, F. P.

    1996-01-01

    The oceans play an important role in the geochemical cycle of methyl bromide (CH3Br), the major carrier of O3-destroying bromine to the stratosphere. The quantity of CH3Br produced annually in seawater is comparable to the amount entering the atmosphere each year from natural and anthropogenic sources. The production mechanism is unknown but may be biological. Most of this CH3Br is consumed in situ by hydrolysis or reaction with chloride. The size of the fraction which escapes to the atmosphere is poorly constrained; measurements in seawater and the atmosphere have been used to justify both a large oceanic CH3Br flux to the atmosphere and a small net ocean sink. Since the consumption reactions are extremely temperature-sensitive, small temperature variations have large effects on the CH3Br concentration in seawater, and therefore on the exchange between the atmosphere and the ocean. The net CH3Br flux is also sensitive to variations in the rate of CH3Br production. We have quantified these effects using a simple steady state mass balance model. When CH3Br production rates are linearly scaled with seawater chlorophyll content, this model reproduces the latitudinal variations in marine CH3Br concentrations observed in the east Pacific Ocean by Singh et al. [1983] and by Lobert et al. [1995]. The apparent correlation of CH3Br production with primary production explains the discrepancies between the two observational studies, strengthening recent suggestions that the open ocean is a small net sink for atmospheric CH3Br, rather than a large net source. The Southern Ocean is implicated as a possible large net source of CH3Br to the atmosphere. Since our model indicates that both the direction and magnitude of CH3Br exchange between the atmosphere and ocean are extremely sensitive to temperature and marine productivity, and since the rate of CH3Br production in the oceans is comparable to the rate at which this compound is introduced to the atmosphere, even small

  14. Current and Potential Future Bromide Loads from Coal-Fired Power Plants in the Allegheny River Basin and Their Effects on Downstream Concentrations.

    PubMed

    Good, Kelly D; VanBriesen, Jeanne M

    2016-09-06

    The presence of bromide in rivers does not affect ecosystems or present a human health risk; however, elevated concentrations of bromide in drinking water sources can lead to difficulty meeting drinking water disinfection byproduct (DBP) regulations. Recent attention has focused on oil and gas wastewater and coal-fired power plant wet flue gas desulfurization (FGD) wastewater bromide discharges. Bromide can be added to coal to enhance mercury removal, and increased use of bromide at some power plants is expected. Evaluation of potential increases in bromide concentrations from bromide addition for mercury control is lacking. The present work utilizes bromide monitoring data in the Allegheny River and a mass-balance approach to elucidate bromide contributions from anthropogenic and natural sources under current and future scenarios. For the Allegheny River, the current bromide is associated approximately 49% with oil- and gas-produced water discharges and 33% with coal-fired power plants operating wet FGD, with 18% derived from natural sources during mean flow conditions in August. Median wet FGD bromide loads could increase 3-fold from 610 to 1900 kg/day if all plants implement bromide addition for mercury control. Median bromide concentrations in the lower Allegheny River in August would rise to 410, 200, and 180 μg/L under low-, mean-, and high-flow conditions, respectively, for the bromide-addition scenario.

  15. Kinetics adsorption study of the ethidium bromide by graphene oxide as adsorbent from aqueous matrices

    NASA Astrophysics Data System (ADS)

    Rajabi, M.; Moradi, O.; Zare, K.

    2017-01-01

    In this study of ethidium bromide, adsorption from aqueous matrices by graphene oxide as adsorbent was investigated. Influencing parameters in the adsorption study included contact time, temperature, and pH. The optimum time was selected 17 min, and the best value of pH was determined at 8. All adsorption experiments were performed at 298 K temperature. The maximum wavelength of ethidium bromide was 475 nm. The Elovich, four types of the pseudo-second-order, the pseudo-first-order, and intra-particle diffusion kinetic adsorption models were used for kinetic study, and the results show that adsorption of ethidium bromide on graphene oxide surface best complied with type (I) of the pseudo-second-order kinetic model.

  16. A comparison between the gastric and salivary concentration of iodide, pertechnetate, and bromide in man

    PubMed Central

    Harden, R. McG.; Alexander, W. D.; Shimmins, J.; Chisholm, D.

    1969-01-01

    The concentration of iodide (I−) and pertechnetate (TcO4−) and bromide (Br−) has been measured simultaneously in gastric juice and parotid saliva. The combined gastric and salivary clearance for iodide and pertechnetate is more than twice the clearance of these ions by the thyroid gland. The concentration of the ions was in the order I−>TcO4−>Br− in both gastric juice and saliva. Differences exist between the secretion of iodide, pertechnetate, and bromide. Bromide, in contrast to iodide and pertechnetate, was found to be more concentrated in gastric juice than in saliva. The ratio of the iodide to pertechnetate clearance was greater in gastric juice than in saliva. PMID:5358585

  17. Characterization of micelle formation of dodecyldimethyl-N-2-phenoxyethylammonium bromide in aqueous solution.

    PubMed

    Khatua, Dibyendu; Gupta, Abhisek; Dey, Joykrishna

    2006-06-01

    Aggregation behavior of dodecyldimethyl-N-2-phenoxyethylammonium bromide commonly called domiphen bromide (DB) was studied in aqueous solution. The Krafft temperature of the surfactant was measured. The surfactant has been shown to form micellar structures in a wide concentration range. The critical micelle concentration was determined by surface tension, conductivity, and fluorescence methods. The conductivity data were also employed to determine the degree of surfactant counterion dissociation. The changes in Gibb's free energy, enthalpy, and entropy of the micellization process were determined at different temperature. The steady-state fluorescence quenching measurements with pyrene and N-phenyl-1-naphthylamine as fluorescence probes were performed to obtain micellar aggregation number. The results were compared with those of dodecyltrimethylammonium bromide (DTAB) surfactant. The micelle formation is energetically more favored in DB compared to that in DTAB. The 1H-NMR spectra were used to show that the 2-phenoxyethyl group, which folds back onto the micellar surface facilitates aggregate formation in DB.

  18. Seeded Growth of Monodisperse Gold Nanorods Using Bromide-Free Surfactant Mixtures

    SciTech Connect

    Ye, XC; Gao, YZ; Chen, J; Reifsnyder, DC; Zheng, C; Murray, CB

    2013-05-01

    We demonstrate for the first time that monodisperse gold nanorods (NRs) with broadly tunable dimensions and longitudinal surface plasmon resonances can be synthesized using a bromide-free surfactant mixture composed of alkyltrimethylammonium chloride and sodium oleate. It is found that uniform gold NRs can be obtained even with an iodide concentration approaching 100 mu M in the growth solution. In contrast to conventional wisdom, our results provide conclusive evidence that neither bromide as the surfactant counterion nor a high concentration of bromide ions in the growth solution is essential for gold NR formation. Correlated electron microscopy study of three-dimensional structures of gold NRs reveals a previously unprecedented octagonal prismatic structure enclosed predominantly by high index {310} crystal planes. These findings should have profound implications for a comprehensive mechanistic understanding of seeded growth of anisotropic metal nanocrystals.

  19. [Extraction-spectrophotometric determination of carbethopendecinium-bromide in drug preparations].

    PubMed

    Lasková, M; Blesová, M

    2003-09-01

    The paper elaborated the conditions for the determination of carbethopendecinium bromide with bromthymol blue and methyl orange (concentration of the drug and the colouring agent, pH of the aqueous phase, period of extraction with chloroform). Within a carbethopendecinium bromide concentration range of 1.10(-5) to 6.10(-5) mol/l, the linear dependence of absorbance of the ion-associate with the colouring agent on concentration was confirmed. At pH 3 and pH 10, the above-described procedure was used to determine the content of carbethopendecinium bromide in medicinal preparations (eye and nasal drops) using the calibration curve and comparison with one standard. The results were reproducible and the found deviations from the declared content ranged within a tolerance of +/- 10%.

  20. Salty glycerol versus salty water surface organization: bromide and iodide surface propensities.

    PubMed

    Huang, Zishuai; Hua, Wei; Verreault, Dominique; Allen, Heather C

    2013-07-25

    Salty NaBr and NaI glycerol solution interfaces are examined in the OH stretching region using broadband vibrational sum frequency generation (VSFG) spectroscopy. Raman and infrared (IR) spectroscopy are used to further understand the VSFG spectroscopic signature. The VSFG spectra of salty glycerol solutions reveal that bromide and iodide anions perturb the interfacial glycerol organization in a manner similar as that found in aqueous halide salt solutions, thus confirming the presence of bromide and iodide anions at the glycerol surface. Surface tension measurements are consistent with the surface propensity suggested by the VSFG data and also show that the surface excess increases with increasing salt concentration, similar to that of water. In addition, iodide is shown to have more surface prevalence than bromide, as has also been determined from aqueous solutions. These results suggest that glycerol behaves similarly to water with respect to surface activity and solvation of halide anions at its air/liquid interface.

  1. In-Depth Assessment of the Palladium-Catalyzed Fluorination of Five-Membered Heteroaryl Bromides.

    PubMed

    Milner, Phillip J; Yang, Yang; Buchwald, Stephen L

    2015-10-12

    A thorough investigation of the challenging Pd-catalyzed fluorination of five-membered heteroaryl bromides is presented. Crystallographic studies and density functional theory (DFT) calculations suggest that the challenging step of this transformation is C-F reductive elimination of five-membered heteroaryl fluorides from Pd(II) complexes. On the basis of these studies, we have found that various heteroaryl bromides bearing phenyl groups in the ortho position can be effectively fluorinated under catalytic conditions. Highly activated 2-bromoazoles, such as 8-bromocaffeine, are also viable substrates for this reaction.

  2. Lithium bromide-induced structural changes in a nickel bis-alkoxide complex.

    PubMed

    Ichiokai, Hiromi; Vicic, David A

    2013-01-01

    The bis-alkoxide [(DEAMP)2Ni] (1, DEAMP = 1-(diethylamino)-2-methylpropan-2-olate) was found to react with trace amounts of lithium bromide to afford the bis-LiBr adduct 2, in which the oxygens of the DEAMP ligand coordinate to lithium to form a chiral-at-metal complex. This new complex is five-coordinate at nickel, and contains nickel and oxygen atoms which are all chiral. One diastereomer precipitates from pentane solution. The two lithium ions rigidify the new structure in the solid state by coordinating to the oxygen and bromide atoms.

  3. One-pot synthesis of 1-iodoalkynes and trisubstituted alkenes from benzylic and allylic bromides.

    PubMed

    Pelletier, Guillaume; Lie, Sharon; Mousseau, James J; Charette, André B

    2012-11-02

    1-Iodoalkynes are formed in moderate to high yields from readily accessible benzylic and allylic alkyl bromides by a one-pot homologation/double elimination procedure with iodoform (CHI(3)). The developed conditions include facile purification and avoid the use of an excess of triphenylphosphine (PPh(3)), as described in classical Corey-Fuchs iodoalkynylation conditions. Replacing CHI(3) with CHI(2)Cl allows the isolation of the corresponding gem-(Z)-chloro-(E)-iodoalkene in good yield and stereoselectivity. Moreover, the use of benzhydryl bromides as nucleophiles enables the synthesis of trisubstituted alkenes under similar reaction conditions.

  4. Improved light olefin yield from methyl bromide coupling over modified SAPO-34 molecular sieves.

    PubMed

    Zhang, Aihua; Sun, Shouli; Komon, Zachary J A; Osterwalder, Neil; Gadewar, Sagar; Stoimenov, Peter; Auerbach, Daniel J; Stucky, Galen D; McFarland, Eric W

    2011-02-21

    As an alternative to the partial oxidation of methane to synthesis gas followed by methanol synthesis and the subsequent generation of olefins, we have studied the production of light olefins (ethylene and propylene) from the reaction of methyl bromide over various modified microporous silico-aluminophosphate molecular-sieve catalysts with an emphasis on SAPO-34. Some comparisons of methyl halides and methanol as reaction intermediates in their conversion to olefins are presented. Increasing the ratio of Si/Al and incorporation of Co into the catalyst framework improved the methyl bromide yield of light olefins over that obtained using standard SAPO-34.

  5. Bromidotetra-kis-(2-ethyl-1H-imidazole-κN (3))copper(II) bromide.

    PubMed

    Godlewska, Sylwia; Kelm, Harald; Krüger, Hans-Jörg; Dołęga, Anna

    2012-12-01

    The Cu(II) ion in the title mol-ecular salt, [CuBr(C5H8N2)4]Br, is coordinated in a square-pyramidal geometry by four N atoms of imidazole ligands and one bromide anion in the apical position. In the crystal, the ions are linked by N-H⋯Br hydrogen bonds involving both the coordinating and the free bromide species as acceptors. A C-H⋯Br inter-action is also observed. Overall, a three-dimensional network results.

  6. Breakdown of ionic character of molecular alkali bromides in inner-valence photoionization

    SciTech Connect

    Karpenko, A. Iablonskyi, D.; Kettunen, J. A.; Cao, W.; Huttula, M.; Aksela, H.; Urpelainen, S.

    2014-05-28

    The inner-valence region of alkali bromide XBr (X=Li, Na, K, Rb) vapours has been studied experimentally by means of synchrotron radiation excited photoelectron spectroscopy. Experimental spectra were analyzed by comparing them with available theoretical results and previous experiments. Ionic character of alkali bromides is seen to change in the inner-valence region with increasing atomic number of the alkali atom. A mechanism involving mixing between Br 4s and Rb 4p orbitals has been suggested to account for the fine structure observed in inner-valence ionization region of RbBr.

  7. Bromide, Chloride, and Sulfate Concentrations, and Specific Conductance, Lake Texoma, Texas and Oklahoma, 2007-08

    USGS Publications Warehouse

    Baldys, Stanley

    2009-01-01

    The U.S. Geological Survey, in cooperation with the City of Dallas Water Utilities Division, collected water-quality data from 11 sites on Lake Texoma, a reservoir on the Texas-Oklahoma border, during April 2007-September 2008. At 10 of the sites, physical properties (depth, specific conductance, pH, temperature, dissolved oxygen, and alkalinity) were measured and samples were collected for analysis of selected dissolved constituents (bromide, calcium, magnesium, potassium, sodium, carbonate, bicarbonate, chloride, and sulfate); at one site, only physical properties were measured. The primary constituent of interest was bromide. Bromate can form when ozone is used to disinfect raw water containing bromide, and bromate is a suspected human carcinogen. Chloride and sulfate were of secondary interest. Only the analytical results for bromide, chloride, sulfate, and measured specific conductance are discussed in this report. Median dissolved bromide concentrations ranged from 0.28 to 0.60 milligrams per liter. The largest median dissolved bromide concentration (0.60 milligram per liter at site 11) was from the Red River arm of Lake Texoma. Dissolved bromide concentrations generally were larger in the Red River arm of Lake Texoma than in the Washita arm of the lake. Median dissolved chloride concentrations were largest in the Red River arm of Lake Texoma at site 11 (431 milligrams per liter) and smallest at site 8 (122 milligrams per liter) in the Washita arm. At site 11 in the Red River arm, the mean and median chloride concentrations exceeded the secondary maximum contaminant level of 300 milligrams per liter for chloride established by the 'Texas Surface Water Quality Standards' for surface-water bodies designated for the public water supply use. Median dissolved sulfate concentrations ranged from 182 milligrams per liter at site 4 in the Big Mineral arm to 246 milligrams per liter at site 11 in the Red River arm. None of the mean or median sulfate concentrations

  8. In-Depth Assessment of the Palladium-Catalyzed Fluorination of Five-Membered Heteroaryl Bromides

    PubMed Central

    2015-01-01

    A thorough investigation of the challenging Pd-catalyzed fluorination of five-membered heteroaryl bromides is presented. Crystallographic studies and density functional theory (DFT) calculations suggest that the challenging step of this transformation is C–F reductive elimination of five-membered heteroaryl fluorides from Pd(II) complexes. On the basis of these studies, we have found that various heteroaryl bromides bearing phenyl groups in the ortho position can be effectively fluorinated under catalytic conditions. Highly activated 2-bromoazoles, such as 8-bromocaffeine, are also viable substrates for this reaction. PMID:27056379

  9. Improved synthesis of aryltriethoxysilanes via palladium(0)-catalyzed silylation of aryl iodides and bromides with triethoxysilane.

    PubMed

    Manoso, A S; DeShong, P

    2001-11-02

    The scope of the palladium-catalyzed silylation of aryl halides with triethoxysilane has been expanded to include aryl bromides. A more general Pd(0) catalyst/ligand system has been developed that activates bromides and iodides: palladium(0) dibenzylideneacetone (Pd(dba)(2)) is activated with 2-(di-tert-butylphosphino)biphenyl (Buchwald's ligand) (1:2 mol ratio of Pd/phosphine). Electron-rich para- and meta-substituted aryl halides (including unprotected aniline and phenol derivatives) undergo silylation to form the corresponding aryltriethoxysilane in fair to excellent yield; however, ortho-substituted aryl halides failed to be silylated.

  10. Structure and dynamics of cetyltrimethylammonium bromide water-in-oil microemulsions

    SciTech Connect

    Lang, J.; Zana, R. ); Mascolo, G.; Luisi, P.L. )

    1990-04-05

    The state of water, the droplet size, and interdroplet exchange of reactants between colliding droplets have been investigated by NMR, time-resolved fluorescence quenching, and electrical conductivity in water-in-oil microemulsions made of cetyltrimethylammonium bromide (CTAB) in chloroform/isooctane (2/1, v/v). The effect of the two additives cetyl bromide (CB) and trimethylamine (TMA) on the properties of the droplets has also been investigated. No interdroplet exchange of reactants has been detected in the absence of additives.

  11. Active Control of Interface Shape During the Crystal Growth of Lead Bromide

    NASA Technical Reports Server (NTRS)

    Duval, W. M. B.; Batur, C.; Singh, N. B.

    2003-01-01

    A thermal model for predicting and designing the furnace temperature profile was developed and used for the crystal growth of lead bromide. The model gives the ampoule temperature as a function of the furnace temperature, thermal conductivity, heat transfer coefficients, and ampoule dimensions as variable parameters. Crystal interface curvature was derived from the model and it was compared with the predicted curvature for a particular furnace temperature and growth parameters. Large crystals of lead bromide were grown and it was observed that interface shape was in agreement with the shape predicted by this model.

  12. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Inorganic bromide residues in peanut hay and peanut hulls; statement of policy. 180.123a Section 180.123a Protection of Environment... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut...

  13. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Inorganic bromide residues in peanut hay and peanut hulls; statement of policy. 180.123a Section 180.123a Protection of Environment... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut...

  14. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Inorganic bromide residues in peanut hay and peanut hulls; statement of policy. 180.123a Section 180.123a Protection of Environment... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut...

  15. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Inorganic bromide residues in peanut hay and peanut hulls; statement of policy. 180.123a Section 180.123a Protection of Environment... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut...

  16. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Inorganic bromide residues in peanut hay and peanut hulls; statement of policy. 180.123a Section 180.123a Protection of Environment... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut...

  17. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  18. Biomass Processing using Ionic Liquids for Jet Fuel Production

    DTIC Science & Technology

    2014-04-09

    model compounds) phase diagrams, and Thrust 3: Examination of the activity of cellulase enzymes in ILs for the conversion of cellulose to glucose...1-butyl-3-methylimidazolium acetate, do not result in any significant variation in β-glucosidase cellulase enzyme activity—this is important since

  19. Ionic liquid-in-oil microemulsions.

    PubMed

    Eastoe, Julian; Gold, Sarah; Rogers, Sarah E; Paul, Alison; Welton, Tom; Heenan, Richard K; Grillo, Isabelle

    2005-05-25

    Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets.

  20. Ultrafast Multi-Dimensional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  1. Ultrafast Multi-Dimentional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  2. Ionic Liquid as a Solvent and Catalyst for Acylation of Maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Catalyst-free esterification of maltodextrin was carried out in ionic liquid. Stearate esters of maltodextrin were obtained in various degree of substitution (DS) when vinyl stearate or stearic acid was heated with maltodextrin in ionic liquid, 1-butyl-3-methylimidazolium cyanamide (bmim[dca]). Re...

  3. Esterification of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We shall discuss the use of various ionic liquids in the preparation of starch esters. Starch was reacted with vinyl acetate in different 1-butyl-3-methylimidazolium (bmim) salts as solvents in an effort to produce starches with different acetylation patterns. Overall degree of substitution (DS) w...

  4. EPA Takes Action Against Illegal Methyl Bromide Use in Puerto Rico

    EPA Pesticide Factsheets

    (New York, N.Y.) As part of its ongoing work to address the illegal use of toxic pesticides containing methyl bromide in the Caribbean, the U.S. Environmental Protection Agency has issued legal complaints against two individuals and a pest control company

  5. Hydrology and Water Quality near Bromide Pavilion in Chickasaw National Recreation Area, Murray County, Oklahoma, 2000

    USGS Publications Warehouse

    Andrews, William J.; Burrough, Steven P.

    2002-01-01

    The Bromide Pavilion in Chickasaw National Recreation Area drew many thousands of people annually to drink the mineral-rich waters piped from nearby Bromide and Medicine Springs. Periodic detection of fecal coliform bacteria in water piped to the pavilion from the springs, low yields of the springs, or flooding by adjacent Rock Creek prompted National Park Service officials to discontinue piping of the springs to the pavilion in the 1970s. Park officials would like to resume piping mineralized spring water to the pavilion to restore it as a visitor attraction, but they are concerned about the ability of the springs to provide sufficient quantities of potable water. Pumping and sampling of Bromide and Medicine Springs and Rock Creek six times during 2000 indicate that these springs may not provide sufficient water for Bromide Pavilion to supply large numbers of visitors. A potential problem with piping water from Medicine Spring is the presence of an undercut, overhanging cliff composed of conglomerate, which may collapse. Evidence of intermittent inundation of the springs by Rock Creek and seepage of surface water into the spring vaults from the adjoining creek pose a threat of contamination of the springs. Escherichia coli, fecal coliform, and fecal streptococcal bacteria were detected in some samples from the springs, indicating possible fecal contamination. Cysts of Giardia lamblia and oocysts of Cryptosporidium parvum protozoa were not detected in the creek or the springs. Total culturable enteric viruses were detected in only one water sample taken from Rock Creek.

  6. 78 FR 36507 - Notice of Availability of a Treatment Evaluation Document; Methyl Bromide Fumigation of Blueberries

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-18

    ... schedule for methyl bromide fumigation of blueberries for Mediterranean fruit fly and South American fruit... explains why we have determined that it is effective at neutralizing these fruit flies. We are making the... risk from two fruit fly species, Ceratitis capitata (Mediterranean fruit fly, or Medfly) and...

  7. Methyl Bromide Alternatives Area-Wide Pest Management Project - South Atlantic Progress Report

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Protocols and Standard Operational Procedures (SOPs) were developed for collecting environmental and soil edaphic information during and after application of methyl bromide alternatives. Parameters measured included soil moisture, soil bulk density, percent moisture at field capacity (-0.3 bars wat...

  8. IDENTIFICATION OF NEW DRINKING WATER DISINFECTION BY-PRODUCTS FORMED IN THE PRESENCE OF BROMIDE

    EPA Science Inventory

    Using a combination of mass spectrometry and infrared spectroscopy, disinfection by-products (DBPs) were identified in ozonated drinking water containing elevated bromide levels, and in ozonated water treated with secondary chlorine or chloramine. Only one brominated by-product-d...

  9. Removal of methyl bromide in coastal seawater: Chemical and biological rates

    NASA Astrophysics Data System (ADS)

    King, Daniel B.; Saltzman, Eric S.

    1997-08-01

    A stable isotope tracer technique was used to investigate the loss rate of methyl bromide in surface ocean waters. Unfiltered and 0.2 μm-filtered or autoclaved aliquants of Biscayne Bay seawater samples were spiked with 13CH3Br at roughly 10-100 times ambient concentrations (50-800 pM) and incubated for 10-30 hours. The concentration of 13CH3Br was monitored using gas chromatography with isotope dilution mass spectrometry, with CD3Br as the isotope spike. Removal rates in unfiltered aliquants were significantly faster than in the 0.2 μm-filtered or autoclaved aliquants, indicating that some of the loss of methyl bromide was associated with particulate matter. Filtration experiments indicate that the particulate material responsible for methyl bromide loss is between 0.2 and 1.2 μm in diameter, suggesting that bacteria are likely to be responsible. The particulate-related removal of methyl bromide was inhibited by autoclaving, supporting a biological mechanism.

  10. Charging of silver bromide aqueous interface: evaluation of interfacial equilibrium constants from surface potential data.

    PubMed

    Preočanin, Tajana; Supljika, Filip; Kallay, Nikola

    2010-06-01

    A single crystal silver bromide electrode (SCr-AgBr) was used to measure the inner surface potential (Ψ(0)) at the silver bromide aqueous electrolyte interface as a function of the activities of Br(-) and Ag(+). Absolute values of the surface potential were calculated from electrode potentials of SCr-AgBr using the value of point of zero charge (pBr(pzc)=6.9 [H.A. Hoyen, R.M. Cole, J. Colloid Interface Sci. 41 (1972) 93.]) as the value of point of zero potential. Measurements were performed in potassium nitrate aqueous solutions. The Ψ(0)(pBr) function was linear and slightly dependent on the ionic strength. The reduction values of the slope with respect to the Nernst equation, expressed by the α coefficient, were 0.880,0.935, and 0.950 at ionic strengths of 10(-4), 10(-3), and 10(-2) mol dm(-3), respectively. The results were successfully interpreted by employing the surface complexation model, developed originally for metal oxides and adapted for silver halides. The thermodynamic ("intrinsic") equilibrium constants for binding of bromide (K(n)(∘)) and silver (K(p)(∘)) ions on the corresponding sites at the silver bromide surface were evaluated as lgK(n)(∘)=3.98; lgK(p)(∘)=2.48. Symmetrical counterion surface association was assumed and equilibrium constants were obtained as lgK(NO(3)(-))(∘)=lgK(K(+))(∘)=4.30.

  11. Chlorine utilization during trihalomethane formation in the presence of ammonia and bromide

    SciTech Connect

    Amy, G.L.; Chadik, P.A.; King, P.H.; Cooper, W.J.

    1984-10-01

    The chlorination of humic substances in the presence of ammonia and bromide and the resultant formation of trihalomethanes (THM) are described. The presence of ammonia substantially reduced but did not eliminate THM production during the chlorination of waters containing humic substances. The presence of bromide ion in waters containing humic substances leads to increased THM formation, both in the presence and in the absence of ammonia. In waters containing ammonia, bromide, and humic substances, brominated haloforms can form upon chlorination. Brominated species comprise a larger portion of the total THMs at higher chlorine doses within the free chlorine region of the breakpoint curve than at lower dose in the subbreakpoint region. Although the THM formation reaction is slow and may not be complete even after 1 week of reaction time, the initial rate of formation is competitive with the relatively rapid reactions of bromide oxidation and chloramine formation. After free chlorine is converted to chloramines, THM production should theoretically cease. THMs will form in parallel with chloramine formation. This behavior has important implications for water utilities that use a raw water source containing low but significant levels of ammonia such as the Biscayne Aquifer, or are considering chloramine disinfection as a THM control strategy.

  12. The use of agricultural by-products to capture methyl bromide following post-harvest fumigation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Activated carbons were prepared from plum and peach stone as well as almond and walnut shell and comparatively evaluated as sorbents to minimize the atmospheric emission of methyl bromide following postharvest fumigations. A variety of methods were used to make the activated carbons and each is desc...

  13. Experimental study of negative temperatures in lithium-bromide absorption refrigerating machines

    NASA Astrophysics Data System (ADS)

    Stepanov, K. I.; Mukhin, D. G.; Alekseenko, S. V.; Volkova, O. V.

    2015-07-01

    The authors have developed a method and presented experimental data for obtaining negative temperatures of evaporation in lithium-bromide absorption chillers driven by heat recovery. It has been found that the attainable temperature of the refrigerated medium is the value of -5 °C.

  14. Study of the antibacterial and antifungal activities of synthetic benzyl bromides, ketones, and corresponding chalcone derivatives

    PubMed Central

    Shakhatreh, Muhamad Ali K; Al-Smadi, Mousa L; Khabour, Omar F; Shuaibu, Fatima A; Hussein, Emad I; Alzoubi, Karem H

    2016-01-01

    Several applications of chalcones and their derivatives encouraged researchers to increase their synthesis as an alternative for the treatment of pathogenic bacterial and fungal infections. In the present study, chalcone derivatives were synthesized through cross aldol condensation reaction between 4-(N,N-dimethylamino)benzaldehyde and multiarm aromatic ketones. The multiarm aromatic ketones were synthesized through nucleophilic substitution reaction between 4-hydroxy acetophenone and benzyl bromides. The benzyl bromides, multiarm aromatic ketones, and corresponding chalcone derivatives were evaluated for their activities against eleven clinical pathogenic Gram-positive, Gram-negative bacteria, and three pathogenic fungi by the disk diffusion method. The minimum inhibitory concentration was determined by the microbroth dilution technique. The results of the present study demonstrated that benzyl bromide derivatives have strong antibacterial and antifungal properties as compared to synthetic chalcone derivatives and ketones. Benzyl bromides (1a and 1c) showed high ester activity against Gram-positive bacteria and fungi but moderate activity against Gram-negative bacteria. Therefore, these compounds may be considered as good antibacterial and antifungal drug discovery. However, substituted ketones (2a–b) as well as chalcone derivatives (3a–c) showed no activity against all the tested strains except for ketone (2c), which showed moderate activity against Candida albicans. PMID:27877017

  15. SYBR safe(TM) efficiently replaces ethidium bromide in Aspergillus fumigatus gene disruption.

    PubMed

    Canela, H M S; Takami, L A; Ferreira, M E S

    2017-02-08

    Invasive aspergillosis is a disease responsible for high mortality rates, caused mainly by Aspergillus fumigatus. The available drugs are limited and this disease continues to occur at an unacceptable frequency. Gene disruption is essential in the search for new drug targets. An efficient protocol for A. fumigatus gene disruption was described but it requires ethidium bromide, a genotoxic agent, for DNA staining. Therefore, the present study tested SYBR safe(TM), a non-genotoxic DNA stain, in A. fumigatus gene disruption protocol. The chosen gene was cipC, which has already been disrupted successfully in our laboratory. A deletion cassette was constructed in Saccharomyces cerevisiae and used in A. fumigatus transformation. There was no statistical difference between the tested DNA stains. The success rate of S. cerevisiae transformation was 63.3% for ethidium bromide and 70% for SYBR safe(TM). For A. fumigatus gene disruption, the success rate for ethidium bromide was 100 and 97% for SYBR safe(TM). In conclusion, SYBR safe(TM) efficiently replaced ethidium bromide, making this dye a safe and efficient alternative for DNA staining in A. fumigatus gene disruption.

  16. Steam disinfestation as a methyl bromide alternative in California cut flower nurseries

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Steam may be an effective alternative to methyl bromide in cut flower production in California. Advantages of steam include broad spectrum pest control and a zero hour re-entry interval. The principle disadvantage of sheet steaming is cost effectiveness due to current energy prices and application...

  17. Kinetics and mechanism of the oxidation of bromide by periodate in aqueous acidic solution.

    PubMed

    Szél, Viktor; Csekő, György; Horváth, Attila K

    2014-11-13

    The periodate–bromide reaction has been studied spectrophotometrically mainly in excess of bromide ion, monitoring the formation of the total amount of bromine at 450 nm at acidic buffered conditions and at a constant ionic strength in the presence of a phosphoric acid/dihydrogen phosphate buffer. The stoichiometry of the reaction was established to be strictly IO4(–) + 2Br(–) + 2H(+) → Br2 + IO3(–) + H2O. The formal kinetic order of the reactants was found to be perfectly one and two in the cases of periodate and bromide, respectively, but that of the hydrogen ion lies between one and two. We have also provided experimental evidence that dihydrogen phosphate accelerates the formation of bromine, suggesting the appearance of strong buffer assistance. On the basis of the experiments, a simple two-step kinetic model is proposed involving BrIO3 as a key intermediate that perfectly explains all of the experimental findings. Furthermore, we have also shown that in huge excess of bromide, the apparent rate coefficient obtained from the individual curve fitting method of the absorbance–time series is necessarily independent of the initial periodate concentration that may falsely be interpreted as the rate of bromine formation is also independent of the concentration of periodate.

  18. Ninety-Day Subchronic Oral Toxicity Study of Pyridostigmine Bromide in Rats. Volume 1

    DTIC Science & Technology

    1990-05-01

    myasthenia gravis because of its relative lack of untoward effects in comparison with other anticholinesterases (2). This relative lack of clinical...treatment of myasthenia gravis . Objecrive of Study The objective of this study was to determine the 90-day subchronic toxicity of pyridostigmine bromide in

  19. 77 FR 31564 - Notice of Availability of a Treatment Evaluation Document; Methyl Bromide Fumigation of Cottonseed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-29

    ... Animal and Plant Health Inspection Service Notice of Availability of a Treatment Evaluation Document... add to the Plant Protection and Quarantine Treatment Manual a treatment schedule for methyl bromide... prepared a treatment evaluation document that describes the new treatment schedule and explains why we...

  20. 76 FR 34700 - Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-14

    ... AGENCY Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications... FURTHER INFORMATION CONTACT: General Information: U.S. EPA Stratospheric Ozone Information Hotline, 1-800-296-1996; also http://www.epa.gov/ozone/mbr . Technical Information: Bill Chism, U.S....

  1. Methyl bromide release from activated carbon and the soil/water/carbon interface

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl Bromide (MB) is a major source of stratospheric bromine radical, a known depletor of ozone. The use of ozone-depleting chemicals, including MB, is regulated by the Montreal Protocol. Critical uses of MB are permitted, such as when postharvest fumigation is mandated by an importing country. Fo...

  2. EVALUATION OF CONTAINMENT AND CONTROL OPTIONS FOR METHYL BROMIDE IN COMMODITY TREATMENT

    EPA Science Inventory

    The report gives results of an investigation of means for methyl bromide (MeBr) recovery, reuse, and destruction to prevent atmospheric emissions if its limited use were still allowed. (NOTE: MeBr is an ozone-depleting chemical scheduled to be phased out by the Clean Air Act by t...

  3. Reduced rates and alternatives to methyl bromide for snapdragon production in Florida

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A field trial was conducted to evaluate soil solarization, Midas™ (iodomethane:chloropicrin 50:50, Arysta LifeScience Corp., Cary, NC) and different rates and formulations of methyl bromide under standard and metalized films for the production of snapdragon (Antirrhinum majus) in Martin County, Flor...

  4. Highly efficient synthesis of phenols by copper-catalyzed hydroxylation of aryl iodides, bromides, and chlorides.

    PubMed

    Yang, Kai; Li, Zheng; Wang, Zhaoyang; Yao, Zhiyi; Jiang, Sheng

    2011-08-19

    8-Hydroxyquinolin-N-oxide was found to be a very efficient ligand for the copper-catalyzed hydroxylation of aryl iodides, aryl bromides, or aryl chlorides under mild reaction conditions. This methodology provides a direct transformation of aryl halides to phenols and to alkyl aryl ethers. The inexpensive catalytic system showed great functional group tolerance and excellent selectivity.

  5. Practical Cross-Coupling between O-Based Electrophiles and Aryl Bromides via Ni Catalysis.

    PubMed

    Cao, Zhi-Chao; Luo, Qin-Yu; Shi, Zhang-Jie

    2016-12-02

    Cross-coupling of various O-based electrophiles with aryl bromides was developed through Ni-catalyzed C-O activation in the presence of magnesium. Beside carboxylates, carbamates, and ethers, phenols exhibited excellent reactivity under modified conditions. This chemistry was featured as a simple and environmentally benign process with low catalyst loading and easy manipulations. The method exhibited broad substrate scopes.

  6. Efficient palladium-catalyzed coupling reactions of aryl bromides and chlorides with phenols.

    PubMed

    Hu, Tongjie; Schulz, Thomas; Torborg, Christian; Chen, Xiaorong; Wang, Jun; Beller, Matthias; Huang, Jun

    2009-12-21

    A convenient and general palladium-catalyzed coupling reaction of aryl bromides and chlorides with phenols was developed. Various functional groups such as nitriles, aldehydes, ketones and esters are well tolerated and the corresponding products are obtained in good to excellent yield.

  7. Synthesis of Vinyl Trifluoromethyl Thioethers via Copper-Mediated Trifluoromethylthiolation of Vinyl Bromides.

    PubMed

    Huang, Yangjie; Ding, Jianping; Wu, Chuyi; Zheng, Huidong; Weng, Zhiqiang

    2015-03-06

    A copper-mediated trifluoromethylthiolation of vinyl bromides has been developed. This method provides ready access to vinyl trifluoromethyl thioethers in good to high yields from simple, inexpensive starting materials. A broad substrate scope is achieved, and the reaction is compatible with various functional groups, including cyano, nitro, trifluoromethyl, alkoxy, amino, halide, and heterocyclic groups.

  8. Effect of increasing bromide concentration on toxicity in treated drinking water.

    PubMed

    Sawade, Emma; Fabris, Rolando; Humpage, Andrew; Drikas, Mary

    2016-04-01

    Research is increasingly indicating the potential chronic health effects of brominated disinfection by-products (DBPs). This is likely to increase with elevated bromide concentrations resulting from the impacts of climate change, projected to include extended periods of drought and the sudden onset of water quality changes. This will demand more rigorous monitoring throughout distribution systems and improved water quality management at water treatment plants (WTPs). In this work the impact of increased bromide concentration on formation of DBPs following conventional treatment and chlorination was assessed for two water sources. Bioanalytical tests were utilised to determine cytotoxicity of the water post disinfection. Coagulation was shown to significantly reduce the cytotoxicity of the water, indicating that removal of natural organic matter DBP precursors continues to be an important factor in drinking water treatment. Most toxic species appear to form within the first half hour following disinfectant addition. Increasing bromide concentration across the two waters was shown to increase the formation of trihalomethanes and shifted the haloacetic acid species distribution from chlorinated to those with greater bromine substitution. This correlated with increasing cytotoxicity. This work demonstrates the challenges faced by WTPs and the possible effects increasing levels of bromide in source waters could have on public health.

  9. Methods to facilitate the adoption of alternatives to methyl bromide soil fumigation by California strawberry growers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The goal of this project is to facilitate the adoption of strawberry production systems that do not use methyl bromide (MB). The five year project initially focused on fumigant alternatives to MB. The project has resulted in increased use of barrier films that reduce fumigant emission. The focus s...

  10. TRIBROMOPYRROLE, BROMINATED ACIDS, AND OTHER DISINFECTION BYPRODUCTS PRODUCED BY DISINFECTION OF DRINKING WATER RICH IN BROMIDE

    EPA Science Inventory

    Using gas chromatography/mass spectrometry (GC/MS), we investigated the formation of disinfection byproducts (DBPs) from high bromide waters (2 mg/L) treated with chlorine or chlorine dioxide used in combination with chlorine and chloramines. This study represents the first comp...

  11. Neuropsychological Functioning in Gulf War Veterans Exposed to Pesticides and Pyridostigmine Bromide

    DTIC Science & Technology

    2008-08-01

    this sweeping pesticide review, the EPA also suggested that some OP pesticides may have endocrine disrupting properties at doses much lower than would...EPA because of its persistence in the environment, ability to bioaccumulate, potential as a carcinogen and evidence as an endocrine disruptor (http...War Veterans Exposed to Pesticides and Pyridostigmine Bromide PRINCIPAL INVESTIGATOR: Maxine Krengel, Ph.D. CONTRACTING

  12. 78 FR 32646 - Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-31

    ... on Substances that Deplete the Ozone Layer for industrialized countries and to allow EPA to provide a... AGENCY Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications... FURTHER INFORMATION CONTACT: General Information: U.S. EPA Stratospheric Ozone Information Hotline,...

  13. 77 FR 29341 - Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-17

    ... to the provisions of the Montreal Protocol on Substances that Deplete the Ozone Layer for... AGENCY Protection of Stratospheric Ozone: Request for Methyl Bromide Critical Use Exemption Applications... FURTHER INFORMATION CONTACT: General Information: U.S. EPA Stratospheric Ozone Information Hotline,...

  14. Headspace gas chromatographic method for determination of methyl bromide in food ingredients

    SciTech Connect

    DeVries, J.W.; Broge, J.M.; Schroeder, J.P.; Bowers, R.H.; Larson, P.A.; Burns, N.M.

    1985-11-01

    A headspace gas chromatographic (GC) method, which can be automated, has been developed for determination of methyl bromide. This method has been applied to wheat, flour, cocoa, and peanuts. Samples to be analyzed are placed in headspace sample vials, water is added, and the vials are sealed with Teflon-lined septa. After an appropriate equilibration time at 32 degrees C, the samples are analyzed within 10 h. A sample of the headspace is withdrawn and analyzed on a gas chromatograph equipped with an electron capture detector (ECD). Methyl bromide levels were quantitated by comparison of peak area with a standard. The standard was generated by adding a known amount of methyl bromide to a portion of the matrix being analyzed and which was known to be methyl bromide free. The detection limit of the method was 0.4 ppb. The coefficient of variation (CV) was 6.5% for wheat, 8.3% for flour, 3.3% for cocoa, and 11.6% for peanuts.

  15. OZONATION BYPRODUCTS: IDENTIFICATION OF BROMOHYDRINS FROM THE OZONATION OF NATURAL WATERS WITH ENHANCED BROMIDE LEVELS

    EPA Science Inventory

    When ozone is used in the treatment of drinking water, it reacts with both inorganic and organic compounds to form byproducts. f bromide is present, it may be oxidized to hydrobromous acid, which may than react with natural organic matter to form brominated organic compounds. he ...

  16. A novel explicit approach to model bromide and pesticide transport in connected soil structures

    NASA Astrophysics Data System (ADS)

    Klaus, J.; Zehe, E.

    2011-07-01

    The present study tests whether an explicit treatment of worm burrows and tile drains as connected structures is feasible for simulating water flow, bromide and pesticide transport in structured heterogeneous soils at hillslope scale. The essence is to represent worm burrows as morphologically connected paths of low flow resistance in a hillslope model. A recent Monte Carlo study (Klaus and Zehe, 2010, Hydrological Processes, 24, p. 1595-1609) revealed that this approach allowed successful reproduction of tile drain event discharge recorded during an irrigation experiment at a tile drained field site. However, several "hillslope architectures" that were all consistent with the available extensive data base allowed a good reproduction of tile drain flow response. Our second objective was thus to find out whether this "equifinality" in spatial model setups may be reduced when including bromide tracer data in the model falsification process. We thus simulated transport of bromide for the 13 spatial model setups that performed best with respect to reproduce tile drain event discharge, without any further calibration. All model setups allowed a very good prediction of the temporal dynamics of cumulated bromide leaching into the tile drain, while only four of them matched the accumulated water balance and accumulated bromide loss into the tile drain. The number of behavioural model architectures could thus be reduced to four. One of those setups was used for simulating transport of Isoproturon, using different parameter combinations to characterise adsorption according to the Footprint data base. Simulations could, however, only reproduce the observed leaching behaviour, when we allowed for retardation coefficients that were very close to one.

  17. Kinetics of Chlorination of Benzophenone-3 in the Presence of Bromide and Ammonia.

    PubMed

    Abdallah, Pamela; Deborde, Marie; Dossier Berne, Florence; Karpel Vel Leitner, Nathalie

    2015-12-15

    The aim of this study was to assess the impact of chlorination on the degradation of one of the most commonly used UV filters (benzophenone-3 (BP-3)) and the effects of bromide and ammonia on the kinetics of BP-3 elimination. Bromide and ammonia are rapidly converted to bromine and chloramines during chlorination. At first, the rate constants of chlorine, bromine and monochloramine with BP-3 were determined at various pH levels. BP-3 was found to react rapidly with chlorine and bromine, with values of apparent second order rate constants equal to 1.25(±0.14) × 10(3) M(-1)·s(-1) and 4.04(±0.54) × 10(6) M(-1)·s(-1) at pH 8.5 for kChlorine/BP-3 and kBromine/BP-3, respectively, whereas low monochloramine reactivity was observed (kNH2Cl/BP-3 = 0.112 M(-1)·s(-1)). To assess the impact of the inorganic content of water on BP-3 degradation, chlorination experiments with different added concentrations of bromide and/or ammonia were conducted. Under these conditions, BP-3 degradation was found to be enhanced in the presence of bromide due to the formation of bromine, whereas it was inhibited in the presence of ammonia. However, the results obtained were pH dependent. Finally, a kinetic model considering 18 reactions was developed using Copasi to estimate BP-3 degradation during chlorination in the presence of bromide and ammonia.

  18. Utility of Bromide and Heat Tracers for Aquifer Characterization Affected by Highly Transient Flow Conditions

    SciTech Connect

    Ma, Rui; Zheng, Chunmiao; Zachara, John M.; Tonkin, Matthew J.

    2012-08-29

    A tracer test using both bromide and heat tracers conducted at the Integrated Field Research Challenge site in Hanford 300 Area (300A), Washington, provided an instrument for evaluating the utility of bromide and heat tracers for aquifer characterization. The bromide tracer data were critical to improving the calibration of the flow model complicated by the highly dynamic nature of the flow field. However, most bromide concentrations were obtained from fully screened observation wells, lacking depth-specific resolution for vertical characterization. On the other hand, depth-specific temperature data were relatively simple and inexpensive to acquire. However, temperature-driven fluid density effects influenced heat plume movement. Moreover, the temperature data contained “noise” caused by heating during fluid injection and sampling events. Using the hydraulic conductivity distribution obtained from the calibration of the bromide transport model, the temperature depth profiles and arrival times of temperature peaks simulated by the heat transport model were in reasonable agreement with observations. This suggested that heat can be used as a cost-effective proxy for solute tracers for calibration of the hydraulic conductivity distribution, especially in the vertical direction. However, a heat tracer test must be carefully designed and executed to minimize fluid density effects and sources of noise in temperature data. A sensitivity analysis also revealed that heat transport was most sensitive to hydraulic conductivity and porosity, less sensitive to thermal distribution factor, and least sensitive to thermal dispersion and heat conduction. This indicated that the hydraulic conductivity remains the primary calibration parameter for heat transport.

  19. Comparison of salbutamol and ipratropium bromide versus salbutamol alone in the treatment of acute severe asthma.

    PubMed

    Hossain, A S; Barua, U K; Roy, G C; Sutradhar, S R; Rahman, I; Rahman, G

    2013-04-01

    The use of nebulized Ipratropium bromide, quaternary anticholinergic bronchodilators in combination with beta-agonist for the treatment of acute asthma in adults is controversial. In a view of different recommendation the present study is undertaken in Bangladeshi patients. Combination of inhaled Ipratropium bromide and Salbutamol provides greater bronchodilatation than mono therapy with Salbutamol alone in acute severe asthma. Patients of severe asthma (PEFR <50% of predicted) were enrolled into control group (Salbutamol only) and case (Salbutamol + Ipratropium bromide) group. After measurement of peak expiratory flow, patient received 3 doses of 2.5 mg Salbutamol (n=40) only or 3 doses of both 2.5mg Salbutamol and 500mcg Ipratropium bromide at an interval of 20 minutes (n=40) through a jet nebulizer. Peak flow was reassessed 30 & 60 minutes after treatment. Peak flow at baseline was similar in two groups. Then at 30 minutes after nebulization, the mean±SD percentage increase in peak flow was greater in combination group (60.01±35.01%) than Salbutamol group (44.47±25.03%) with difference of 16% (p=0.025). At 60 minutes the percentage increase in peak flow was about 32% greater in combination group than Salbutamol group (94.44±33.70% vs. 62.57±29.26%, p=0.000) and combination group reached percentage predicted peak flow more than 60% while Sabutamol group did not. Ipratropium Bromide and Salbutamol nebulized combinedly have better bronchodilating effect than Salbultamol alone in acute severe asthma.

  20. Improvement of Quality of Nonanesthetic Colonoscopy by Preoperative Administration of Pinaverium Bromide

    PubMed Central

    Wang, Xiao-Lin; Zhou, Jian-Ning; Ren, Li; Pan, Xiao-Li; Ren, Hong-Yu; Liu, Jun

    2017-01-01

    Background: Nonanesthetic colonoscopy is popular in clinical practice in China. However, intestinal spasms often result in a prolonged examination time, increased operating difficulties, decreased polyp detection rate, and failure to complete the procedure clinically. Therefore, exploring alternative approaches that can reduce the pain in patients during colonoscopy is of utmost importance, and finding the optimal preoperative administration to improve the quality of nonanesthetic colonoscopy is also necessary. This study aimed to investigate the effects of the prophylactic administration of pinaverium bromide before colonoscopy and the effects of pinaverium bromide alone at different time points or combined with scopolamine butylbromide. Methods: A randomized controlled trial was performed on a cohort of 1000 patients who underwent colonoscopy in outpatient clinic of Wuhan Union Hospital. The patients were randomly assigned to the following groups: Group A, given oral pinaverium bromide (100 mg, three times a day) one day before examination combined with intramuscular injection of scopolamine butylbromide (20 mg) 10 min before colonoscopy; Group B0, given pinaverium bromide alone on the day of colonoscopy (100 mg, three times a day); Group B1, given pinaverium bromide alone (100 mg, three times a day) one day before colonoscopy; Group B2, given pinaverium bromide alone (100 mg, three times a day) two days before colonoscopy; and Group C, given scopolamine butylbromide alone (20 mg) before colonoscopy. The successful rate of colonoscopy, procedure time, degree of abdominal pain, and polyp detection rate were recorded and compared among all groups. Results: The successful rate of colonoscopy in Group B1 (82.0%) and Group B2 (83.0%) was significantly higher than that in Group B0 (62.0%, all P < 0.01). The time to reach the ileocecal region in Group B1 and Group B2 were lower than those in Group B0 (all P < 0.05). However, no significant differences were observed in

  1. Gold-ionic liquid nanofluids with preferably tribological properties and thermal conductivity

    NASA Astrophysics Data System (ADS)

    Wang, Baogang; Wang, Xiaobo; Lou, Wenjing; Hao, Jingcheng

    2011-12-01

    Gold/1-butyl-3-methylimidazolium hexafluorophosphate (Au/[Bmim][PF6]) nanofluids containing different stabilizing agents were fabricated by a facile one-step chemical reduction method, of which the nanofluids stabilized by cetyltrimethylammonium bromide (CTABr) exhibited ultrahighly thermodynamic stability. The transmission electron microscopy, UV-visible absorption, Fourier transform infrared, and X-ray photoelectron characterizations were conducted to reveal the stable mechanism. Then, the tribological properties of these ionic liquid (IL)-based gold nanofluids were first investigated in more detail. In comparison with pure [Bmim][PF6] and the nanofluids possessing poor stability, the nanofluids with high stability exhibited much better friction-reduction and anti-wear properties. For instance, the friction coefficient and wear volume lubricated by the nanofluid with rather low volumetric concentration (1.02 × 10-3%) stabilized by CTABr under 800 N are 13.8 and 45.4% lower than that of pure [Bmim][PF6], confirming that soft Au nanoparticles (Au NPs) also can be excellent additives for high performance lubricants especially under high loads. Moreover, the thermal conductivity (TC) of the stable nanofluids with three volumetric fraction (2.55 × 10-4, 5.1 × 10-4, and 1.02 × 10-3%) was also measured by a transient hot wire method as a function of temperature (33 to 81°C). The results indicate that the TC of the nanofluid (1.02 × 10-3%) is 13.1% higher than that of [Bmim][PF6] at 81°C but no obvious variation at 33°C. The conspicuously temperature-dependent and greatly enhanced TC of Au/[Bmim][PF6] nanofluids stabilized by CTABr could be attributed to micro-convection caused by the Brownian motion of Au NPs. Our results should open new avenues to utilize Au NPs and ILs in tribology and the high-temperature heat transfer field.

  2. Gold-ionic liquid nanofluids with preferably tribological properties and thermal conductivity.

    PubMed

    Wang, Baogang; Wang, Xiaobo; Lou, Wenjing; Hao, Jingcheng

    2011-03-28

    Gold/1-butyl-3-methylimidazolium hexafluorophosphate (Au/[Bmim][PF6]) nanofluids containing different stabilizing agents were fabricated by a facile one-step chemical reduction method, of which the nanofluids stabilized by cetyltrimethylammonium bromide (CTABr) exhibited ultrahighly thermodynamic stability. The transmission electron microscopy, UV-visible absorption, Fourier transform infrared, and X-ray photoelectron characterizations were conducted to reveal the stable mechanism. Then, the tribological properties of these ionic liquid (IL)-based gold nanofluids were first investigated in more detail. In comparison with pure [Bmim][PF6] and the nanofluids possessing poor stability, the nanofluids with high stability exhibited much better friction-reduction and anti-wear properties. For instance, the friction coefficient and wear volume lubricated by the nanofluid with rather low volumetric concentration (1.02 × 10-3%) stabilized by CTABr under 800 N are 13.8 and 45.4% lower than that of pure [Bmim][PF6], confirming that soft Au nanoparticles (Au NPs) also can be excellent additives for high performance lubricants especially under high loads. Moreover, the thermal conductivity (TC) of the stable nanofluids with three volumetric fraction (2.55 × 10-4, 5.1 × 10-4, and 1.02 × 10-3%) was also measured by a transient hot wire method as a function of temperature (33 to 81°C). The results indicate that the TC of the nanofluid (1.02 × 10-3%) is 13.1% higher than that of [Bmim][PF6] at 81°C but no obvious variation at 33°C. The conspicuously temperature-dependent and greatly enhanced TC of Au/[Bmim][PF6] nanofluids stabilized by CTABr could be attributed to micro-convection caused by the Brownian motion of Au NPs. Our results should open new avenues to utilize Au NPs and ILs in tribology and the high-temperature heat transfer field.

  3. Ionic liquids as a key medium for efficient extraction of copper complexes from chia seeds (Salvia hispanica L.).

    PubMed

    Wojcieszek, Justyna; Popowski, Dominik; Ruzik, Lena

    2016-05-15

    Due to insufficient information, the aim of study was to concern on the optimization of extraction procedure of selected metal complexes with flavonoids from chia seeds. Evaluation of the amount of elements in compound, not only their total concentration content, is highly important due to the fact, that only a part from total content of metal is absorbed by human body. At the beginning the total amount of elements in chia seeds was established as 14.51±0.42 µg g(-1) for copper, 57.44±1.23 µg g(-1) for manganese, 81.12±1.89 µg g(-1) for zinc and 0.35±0.13 µg g(-1) for cobalt. After the most suitable solvent was established, effects of several parameters on the efficiency of metal extraction were studied. Solvent concentration, solid-solvent ratio, extraction method, extraction time and temperature have been investigated as independent variables. The optimal extraction conditions included vortexing during 20 min in 50°C, using an ionic liquid (1-butyl-3-methylimidazolium bromide) as an extractant, with solid-solvent ratio of 1:20. The determination of total and extractable amount of metals in chia seeds was carried out by standalone ICP MS. In addition, a complementary analysis of extracted metal complexes was performed using SEC-ICP MS method. It was confirmed that the ionic liquid is able to extract different copper complexes in comparison with commonly used solvents. The study indicated that extraction by using an ionic liquid has been successfully applied for determination of metals and metal complexes in chia seeds.

  4. Rapid and sensitive analysis of microcystins using ionic liquid-based in situ dispersive liquid-liquid microextraction.

    PubMed

    Yu, Honglian; Clark, Kevin D; Anderson, Jared L

    2015-08-07

    Three structurally different ionic liquids (ILs), namely 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), 1-(6-hydroxyethyl)-3-methylimidazolium chloride ([HeOHMIM][Cl]) and 1-benzyl-3-(2-hydroxyethyl)imidazolium bromide ([BeEOHIM][Br]), were applied as extraction solvents using in situ dispersive liquid-liquid microextraction (in situ DLLME) for the preconcentration of two microcystin variants, microcystin-RR (MC-RR) and microcystin-LR (MC-LR) from aqueous samples. Extraction parameters including sample solution pH, ratio of IL to metathesis reagent, sample volume, IL quantity, and salt concentration were optimized to achieve the best extraction efficiency. The [BeEOHIM][Br] IL, which contains both an aromatic moiety and a hydroxyl group within its chemical structure, exhibited superior extraction efficiency compared to the other two ILs. The analytical performance of the [BeEOHIM][Br] IL as an extraction solvent for in situ DLLME of microcystins was investigated using HPLC-UV and HPLC-MS. The limits of detection (LODs) for MC-RR and MC-LR were 0.7μgL(-1) using UV detection with a linear range from 1 to 50μgL(-1). The separation method was successfully adapted for ESI-MS/SIM detection, wherein the LODs for MC-RR and MC-LR were greatly improved to 0.005 and 0.003μgL(-1), respectively. The accuracy of the method was demonstrated by examining the relative recovery using tap water and river water and produced recoveries ranging from 45.0 to 109.7% and from 46.3 to 103.2%, respectively.

  5. Severe Illness from Methyl Bromide Exposure at a Condominium Resort--U.S. Virgin Islands, March 2015.

    PubMed

    Kulkarni, Prathit A; Duncan, Mary Anne; Watters, Michelle T; Graziano, Leah T; Vaouli, Elena; Cseh, Larry F; Risher, John F; Orr, Maureen F; Hunte-Ceasar, Tai C; Ellis, Esther M

    2015-07-24

    On March 22, 2015, the Agency for Toxic Substances and Disease Registry (ATSDR) was notified by the U.S. Environmental Protection Agency (EPA) of four cases of suspected acute methyl bromide toxicity among family members vacationing at a condominium resort in the U.S. Virgin Islands. Methyl bromide is a pesticide that has been banned in the United States for use in homes and other residential settings. An investigation conducted by the U.S. Virgin Islands Department of Health (VIDOH), the U.S. Virgin Islands Department of Planning and Natural Resources (DPNR), and EPA confirmed that methyl bromide had been used as a fumigant on March 18 in the building where the family had been residing, 2 days before they were transported to the hospital; three family members had life-threatening illness. On March 25, 2015, a stop-use order for methyl bromide was issued by DPNR to the pest control company that had performed the fumigation. Subsequent investigation revealed that previous fumigation with methyl bromide had occurred on October 20, 2014, at the same condominium resort. In addition to the four ill family members, 37 persons who might have been exposed to methyl bromide as a result of the October 2014 or March 2015 fumigations were identified by VIDOH and ATSDR. Standardized health questionnaires were administered to 16 of the 20 persons for whom contact information was available; six of 16 had symptoms consistent with methyl bromide exposure, including headache and fatigue. Pest control companies should be aware that use of methyl bromide is banned in homes and other residential settings, and clinicians should be aware of the toxicologic syndrome that exposure to methyl bromide can cause.

  6. Bromate formation in bromide-containing water through the cobalt-mediated activation of peroxymonosulfate.

    PubMed

    Li, Zhaobing; Chen, Zhi; Xiang, Yingying; Ling, Li; Fang, Jingyun; Shang, Chii; Dionysiou, Dionysios D

    2015-10-15

    Bromate formation in bromide-containing water through the cobalt (Co)-mediated activation of peroxymonosulfate (PMS) was investigated. Increasing the PMS dosage and the cobalt dosage increased the formation of bromate and bromate yields of up to 100% were recorded under the test conditions. The bromate yield increased to a maximum as the pH rose from 2.7 to 6 before decreasing by over 90% as the pH rose further from 6 to above 9. The bromate formation is a two-step process involving free bromine as a key intermediate and bromate as the final product. In the first step, apart from the known oxidation of bromide to free bromine and of free bromine to bromate by sulfate radicals (SO4(-)), Co(III) produced from the oxidation of Co(II) by PMS and SO4(-) also oxidizes bromide to free bromine. The contribution of Co(III) to the bromate formation was verified with the addition of methanol and EDTA, a radical scavenger and a Co(III) ligand, respectively. In the presence of methanol, free bromine formation increased with increasing Co(II) dosage but no bromate was detected, indicating that Co(III) oxidized bromide to form free bromine but not bromate. In the presence of both EDTA and methanol, no free bromine or bromate was detected, as Co(III) was stabilized by EDTA to form the Co(III)EDTA(-) complex, which could not oxidize bromide. Mathematical simulation further suggested that Co(III) outweighed SO4(-) to oxidize bromide to free bromine. On the other hand, SO4(-) is essential for the oxidation of free bromine to bromate in the second step. In real water, the presence of NOM significantly decreased the bromate formation but caused the brominated organic DBP formation with high quantity. This is the first study to demonstrate the significant bromate formation in the Co/PMS system and the substantial contribution of Co(III) to the formation.

  7. Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model.

    PubMed

    Lantz, Andrew W; Pino, Verónica; Anderson, Jared L; Armstrong, Daniel W

    2006-05-19

    The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces

  8. Properties of an ionic liquid-tolerant Bacillus amyloliquefaciens CMW1 and its extracellular protease.

    PubMed

    Kurata, Atsushi; Senoo, Humiya; Ikeda, Yasuyuki; Kaida, Hideaki; Matsuhara, Chiaki; Kishimoto, Noriaki

    2016-07-01

    An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF3SO3) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF3SO3). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF3SO3, [BMIM]Cl, [BMIM]CF3SO3, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0-12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.

  9. Atmospheric volatilization of methyl bromide, 1,3-dichloropropene, and propargyl bromide through two plastic films: transfer coefficient and temperature effect

    NASA Astrophysics Data System (ADS)

    Wang, D.; Yates, S. R.; Gan, J.; Knuteson, J. A.

    Atmospheric emission of methyl bromide (MeBr) and its potential alternative chemicals such as 1,3-dichloropropene (1,3-D) and propargyl bromide (PrBr) can contribute to air pollution and ozone depletion (for MeBr). One of the main sources of these chemicals is from agricultural soil fumigation. To understand the volatilization dynamics, emission of MeBr, 1,3-D, and PrBr through a polyethylene-based high-barrier film (HBF) and a virtually impermeable film (VIF) was measured using an air flow and sampling system that produced >90% mass balance. The experiment was conducted outdoors and was subjected to ambient daily temperature variations. The HBF film was found to be very permeable to 1,3-D and PrBr, but somewhat less permeable to MeBr. The VIF film was very impermeable to 1,3-D, PrBr, or MeBr. Measured volatilization flux, in general, exhibited strong diurnal variations which were controlled by film temperature. Unlike the HBF film, a time lag (˜12 h) was observed between high-temperatures and high-emission flux values for the VIF film. An impermeable film may be used as an effective means of controlling the atmospheric emission of MeBr and its alternative chemicals.

  10. Underpotential deposition of Cu on Pt(001): Interface structure and the influence of adsorbed bromide

    NASA Astrophysics Data System (ADS)

    Lucas, C. A.; Markovic, N. M.; Ross, P. N.

    1998-05-01

    Using in situ x-ray diffraction, we studied the underpotential deposition (UPD) of copper onto a Pt(001) electrode both in pure perchloric acid and in the presence of bromide anions. In pure perchloric acid, the Cu is deposited in pseudomorphic p(1×1) islands. In the presence of bromide anions, the strong Pt-Br interaction significantly broadens the potential range of Cu UPD. We propose that Br remains in the interface region throughout the UPD process, at first in a disordered Cu-Br phase and then, at more negative potential, forming a c(2×2) closed-packed monolayer on top of the completed p(1×1) Cu monolayer. The structures are compared to those found during Cu UPD onto Pt(111), and explained in terms of the metal-halide interactions and the Pt surface atomic geometry.

  11. Maintaining Flatness of a Large Aperture Potassium Bromide Beamsplitter through Mounting and Vibration

    NASA Technical Reports Server (NTRS)

    Losch, Patricia; Lyons, James, III; Morell, Armando; Heaney, Jim

    1998-01-01

    The Composite Infrared Spectrometer (CIRS) instrument on the Cassini Mission launched in October of 1997. The CIRS instrument contains a mid-infrared and a far-infrared interferometer and operates at 170 Kelvin. The mid-infrared interferometer is a Michelson- type Fourier transform spectrometer utilizing a 3 inch diameter potassium bromide beamsplitter/compensator pair. The potassium bromide elements were tested to verify effects of cooldown and vibration prior to integration into the instrument. The instrument was then aligned at ambient temperatures, tested cryogenically and re-verified after vibration. The stringent design optical figure requirements for the beamsplitter and compensator included fabrication errors, mounting stresses and vibration load effects. This paper describes the challenges encountered in mounting the elements to minimize distortion and to survive vibration.

  12. Maintaining Flatness of a Large Aperture Potassium Bromide Beamsplitter Through Mounting and Vibration

    NASA Technical Reports Server (NTRS)

    Losch, Patricia; Lyons, James J., III; Morell, Armando; Heaney, Jim

    1998-01-01

    The Composite Infrared Spectrometer (CIRS) instrument on the Cassini Mission launched in October of 1997. The CIRS instrument contains a mid-infrared (MIR) and a far-infrared interferometer (FIR) and operates at 170 Kelvin. The MIR is a Michelson Fourier transform spectrometer utilizing a 76 mm (3 inch) diameter potassium bromide beamsplitter and compensator pair. The potassium bromide elements were tested to verify effects of cooldown and vibration prior to integration into the instrument. The instrument was then aligned at ambient temperatures, tested cryogenically and re-verified after vibration. 'Me stringent design optical figure requirements for the beamsplitter and compensator included fabrication errors, mounting stresses and vibration load effects. This paper describes the challenges encountered in mounting the elements to minimize distortion and to survive vibration.

  13. Flow Boiling Heat Transfer to Lithium Bromide Aqueous Solution in Subcooled Region

    NASA Astrophysics Data System (ADS)

    Kaji, Masao; Furukawa, Masahiro; Nishizumi, Takeharu; Ozaki, Shinji; Sekoguchi, Kotohiko

    A theoretical prediction model of the boiling heat transfer coefficient in the subcooled region for water and lithium bromide aqueous solution flowing in a rectangular channel is proposed. In the present heat transfer model, a heat flux is assumed to consist of both the forced convective and the boiling effect components. The forced convective component is evaluated from the empirical correlation of convective heat transfer coefficient for single-phase flow considering the effect of increase of liquid velocity due to net vapor generation. Empirical correlations for determining the heat flux due to the boiling effect and the quality at the onset point of net vapor generation are obtained from the data presented in the first report1). Agreement between the present theoretical prediction and the experimental data is satisfactorily good both for water and lithium bromide aqueous solution.

  14. Effect of Concentration on Evaporation Rate for Lithium Bromide Aqueous Solution in a Falling Film Heater

    NASA Astrophysics Data System (ADS)

    Matsuda, Akira; Ide, Tetsuo

    Experiments on evaporation for lithium bromide aqueous solution (0-55 wt% LiBr) were made in Summary a externally heated wetted-wall column under reduced pressures. The evaporation rates of 5 and 8 wt% LiBr-water solutions were similar to those of water. The evaporation rates, however, owered with further increase of the concentration of LiBr, and at low feed rates the evaporation rates lowered with decrease of the feed rate because the temperature of the falling film rose. On the other hand, at high feed rates the evaporation rates lowered with increase of feed rates because the heat transfer coefficients of the falling film decreased. Therefore, a maximum evaporation rate existed and it was supposed that there is the optimum feed rate. The experimental data agreed with the values that were calculated numerically based on the unidirectional model that lithium bromide didn't move through falling film.

  15. Waveguide Chirped-Pulse Fourier Transform Microwave Spectroscopy of Allyl Bromide

    NASA Astrophysics Data System (ADS)

    McCabe, Morgan N.; Shipman, Steven

    2014-06-01

    The rotational spectrum of allyl bromide was recorded from 8.7 to 26.5 GHz at -20 °C with a waveguide chirped-pulse Fourier transform microwave spectrometer. The rotational spectrum of allyl bromide has been previously studied by Niide and coworkers. However, previous assignments of this spectrum only extended to J = 12 and K_a = 1. Newly acquired data from our spectrometer has allowed us to extend the previous work to higher values of J and K_a, leading to significant improvements in the distortion constants in particular. Comparisons between the spectra and conformational preferences of the allyl halides will also be discussed. Y. Niide, M, Takano,T. Satoh, and Y. Sasada J. Mol. Spectrosc., 63, 108(1976) Niide, Yuzuru, J. Sci. Hiroshima Univ., Ser. A, 48, 1(1984)

  16. Structure, temperature effect and bonding order analysis of hydrated bromide clusters

    NASA Astrophysics Data System (ADS)

    Wen, Hui; Huang, Teng; Liu, Yi-Rong; Jiang, Shuai; Peng, Xiu-Qiu; Miao, Shou-Kui; Wang, Chun-Yu; Hong, Yu; Huang, Wei

    2016-11-01

    Halide ions have been received intense interest in charactering and understanding their implications in atmospheric chemistry since they are related to the ozone destruction in the stratosphere. In the current study, structures, thermodynamic properties, and spectroscopic signatures of hydrated bromide Br-(H2O)n (n = 1-8) clusters are thoroughly studied and compared with available studies, the new global minima were observed for the larger size Br-(H2O)7,8 clusters. The numbers of isomer increase with the increasing water molecules, considering the growing complexity, the isomer populations of each size clusters are provided under a wide temperature range, it was shown that different type of structures possess different temperature dependences. In addition, the bond order of different bond types of hydrated bromide has been systematically investigated for the first time.

  17. Surface tension of aqueous lithium bromide solutions containing 1-octanol as a heat-transfer additive

    SciTech Connect

    Ishida, Kenji; Mori, Y.H.

    1996-11-01

    The surface tension of simulated heat-pump working fluids, aqueous solutions of lithium bromide containing 1-octanol, has been measured, for the first time using a recently developed technique (Ishida et al., Rev. Sci. Instrum. 64, 1,324 (1993)) which is inherently suitable for characterizing the surfactant solution surfaces from the aspects of thermodynamic adsorption equilibrium and adsorption kinetics. The measurement has revealed that even the highest-grade reagents of lithium bromide commercially available are not necessarily free from surfactant impurities. Obtained data on the surface tension vs 1-octanol concentration have been examined on the basis of an equilibrium adsorption model. Through the optimal fitting of the Langmuir-type surface equation of state to the data, they have calculated the surface tension vs surface excess relation and also the variation in surface tension vs 1-octanol concentration relation with the surface area per unit volume of a given solution.

  18. Evaluation of alternatives to methyl bromide in melon crops in Guatemala.

    PubMed

    Díaz-Pérez, M; Camacho-Ferre, F; Diánez-Martínez, F; De Cara-García, M; Tello-Marquina, J C

    2009-02-01

    The monoculture of melon in Guatemala has caused the massive appearance of plants with an analogous syndrome for the well-known disease commonly called melon collapse, or vine decline, causing significant losses in crops. Methyl bromide is commonly used to sterilize soil prior to planting in Guatemala, but it must be phased out by 2015. The objective of this study was to evaluate the technique of grafting melon onto hybrids of Cucurbita (Cucurbita maxima x Cucurbita moschata), as an alternative to using soil disinfectants (such as Metam sodium, 1,3-dichloropropene, and methyl bromide) for the control of collapse. The results suggested that both soil disinfection and grafting were not necessary in these locations, since there were no statistical differences in terms of yields between the treatments and the untreated control. Furthermore, these results demonstrate that decisions to disinfect the soil must be based on the firm identification of the causal agents, in addition to preliminary assessments of yield losses.

  19. Influence of bromide on the performance of the amphipod Hyalella azteca in reconstituted waters.

    PubMed

    Ivey, Chris D; Ingersoll, Chris G

    2016-10-01

    Poor performance of the amphipod Hyalella azteca has been observed in exposures using reconstituted waters. Previous studies have reported success in H. azteca water-only exposures with the addition of relatively high concentrations of bromide. The present study evaluated the influence of lower environmentally representative concentrations of bromide on the response of H. azteca in 42-d water-only exposures. Improved performance of H. azteca was observed in reconstituted waters with >0.02 mg Br/L. Environ Toxicol Chem 2016;35:2425-2429. Published 2016 Wiley Periodicals Inc. on behalf of SETAC. This article is a US Government work and, as such, is in the public domain in the United States of America.

  20. Replacing Conventional Carbon Nucleophiles with Electrophiles: Nickel-Catalyzed Reductive Alkylation of Aryl Bromides and Chlorides

    PubMed Central

    2012-01-01

    A general method is presented for the synthesis of alkylated arenes by the chemoselective combination of two electrophilic carbons. Under the optimized conditions, a variety of aryl and vinyl bromides are reductively coupled with alkyl bromides in high yields. Under similar conditions, activated aryl chlorides can also be coupled with bromoalkanes. The protocols are highly functional-group tolerant (−OH, −NHTs, −OAc, −OTs, −OTf, −COMe, −NHBoc, −NHCbz, −CN, −SO2Me), and the reactions are assembled on the benchtop with no special precautions to exclude air or moisture. The reaction displays different chemoselectivity than conventional cross-coupling reactions, such as the Suzuki–Miyaura, Stille, and Hiyama–Denmark reactions. Substrates bearing both an electrophilic and nucleophilic carbon result in selective coupling at the electrophilic carbon (R–X) and no reaction at the nucleophilic carbon (R–[M]) for organoboron (−Bpin), organotin (−SnMe3), and organosilicon (−SiMe2OH) containing organic halides (X–R–[M]). A Hammett study showed a linear correlation of σ and σ(−) parameters with the relative rate of reaction of substituted aryl bromides with bromoalkanes. The small ρ values for these correlations (1.2–1.7) indicate that oxidative addition of the bromoarene is not the turnover-frequency determining step. The rate of reaction has a positive dependence on the concentration of alkyl bromide and catalyst, no dependence upon the amount of zinc (reducing agent), and an inverse dependence upon aryl halide concentration. These results and studies with an organic reductant (TDAE) argue against the intermediacy of organozinc reagents. PMID:22463689

  1. Effect of lignocaine, sodium cromoglycate, and ipratropium bromide in exercise-induced asthma

    PubMed Central

    Tullett, WM; Patel, KR; Berkin, KE; Kerr, JW

    1982-01-01

    Eight patients with exercise-induced asthma participated in a single-blind trial comparing the protective effects of inhaled lignocaine (estimated dose 48 mg), sodium cromoglycate (estimated dose 12 mg), and ipratropium bromide (estimated dose 120 μg). Saline was used as control. Effects were assessed from the mean maximal percentage fall in forced expiratory volume in one second (FEV1) and maximal mid-expiratory flow rates (MMFR) after they had run on a treadmill for eight minutes. There was no significant change in baseline FEV1 or MMFR before each agent was given. Saline, lignocaine, and sodium cromoglycate did not alter the mean baseline FEV1 or MMFR significantly. Ipratropium caused bronchodilatation with an increase of 16·3% in the mean FEV1 (p<0·001) and of 43·4% in the mean MMFR (p<0·05). After exercise the maximal percentage falls in FEV1 (means and SEM) after saline, lignocaine, sodium cromoglycate, and ipratropium bromide were 38·1% (5·0), 34·5% (6·1), 11·3% (3·7), and 19·3% (7·4) respectively. Similarly, the mean maximal falls in MMFR after saline, lignocaine, sodium cromoglycate, and ipratropium bromide were 54·4% (5·2), 52·9% (7·7), 23·6% (6·6), and 32·1% (10·5) respectively. The inhibitory effects of sodium cromoglycate and ipratropium bromide were significant whereas lignocaine failed to produce an effect. These results suggest that mediator release is an important factor in exercise-induced asthma and that in some patients the effects of the mediators may be on the postsynaptic muscarinic receptors. Local anaesthesia of sensory vagal receptors, on the other hand, does not prevent exercise asthma and these receptors do not appear to have any important role in exercise-induced bronchoconstriction. PMID:6218645

  2. Ruthenium-catalyzed meta/ortho-selective C-H alkylation of azoarenes using alkyl bromides.

    PubMed

    Li, Gang; Ma, Xingxing; Jia, Chunqi; Han, Qingqing; Wang, Ya; Wang, Junjie; Yu, Liuyang; Yang, Suling

    2017-01-19

    meta/ortho-Selective CAr-H (di)alkylation reactions of azoarenes have been achieved via [Ru(p-cymene)Cl2]2 catalyzed ortho-metalation using various types of alkyl bromides. Particularly, dual meta-alkylation of azoarene and reduction offer an attractive strategy for the synthesis of meta-alkylanilines, which are difficult to access via traditional aniline functionalization methods.

  3. High resolution single strand conformation polymorphism analysis using formamide and ethidium bromide staining.

    PubMed Central

    Xie, T; Ho, S L; Ma, O C

    1997-01-01

    Single strand conformation polymorphism (SSCP) analysis using ethidium bromide can be improved by adding formamide as the denaturant. This gives higher resolution than previous SSCP methods; it had 100% sensitivity in the discrimination of 14 PCR samples from two different genes, even for a long fragment close to the upper limit of 250 base pairs. This modified procedure is a rapid, simple, safe, and yet highly sensitive method for detecting structural differences in DNA fragments. Images PMID:9497922

  4. Synthesis of dimethyl aryl acylsulfonium bromides from aryl methyl ketones in a DMSO-HBr system.

    PubMed

    Cao, Zhiling; Shi, Dahua; Qu, Yingying; Tao, Chuanzhou; Liu, Weiwei; Yao, Guowei

    2013-12-16

    A new, simplified method for the synthesis of dimethyl aryl acylsulfonium salts has been developed. A series of dimethyl aryl acylsulfonium bromides were prepared by the reaction of aryl methyl ketones with hydrobromic acid and dimethylsulfoxide (DMSO). This sulfonium salt confirms that bromine production and the bromination reaction take place in the DMSO-HBr oxidation system. What's more, it is also a key intermediate for the synthesis of arylglyoxals.

  5. Nickel-catalyzed cross-electrophile coupling of 2-chloropyridines with alkyl bromides.

    PubMed

    Everson, Daniel A; Buonomo, Joseph A; Weix, Daniel J

    2014-01-01

    The synthesis of 2-alkylated pyridines by the nickel-catalyzed cross-coupling of two different electrophiles, 2-chloropyridines with alkyl bromides, is described. Compared to our previously published conditions for aryl halides, this method uses the different, more rigid bathophenanthroline ligand and is conducted at high concentration in DMF solvent. The method displays promising functional group compatibility and the conditions are orthogonal to the Stille coupling.

  6. Volatilization Mechanism of 1-Ethyl-3-methylimidazolium Bromide Ionic Liquid (Briefing Charts)

    DTIC Science & Technology

    2012-04-01

    116.1±6.6 kJ/mol and H.‡(CH3CH2Br) = 122.9±7.2 kJ/mol, and the results are found to be in agreement with calculated values for the SN2 reactions ...bromides and alkylimidazoles, presumably through alkyl abstraction via an SN2 type mechanism, and that vaporization of intact ion pairs or the formation

  7. Quartz Crystal Microbalance Studies of Deposition and Dissolution Mechanisms of Electrochromic Films of Diheptylviologen Bromide

    DTIC Science & Technology

    1988-07-07

    to I (3 H*- ~" 2 study monolayer oxide formation on gold electrodes (28a), underpotential deposition of various metals (27b,c), bulk metal deposition ...total delivery of reactant to the surface. Thus, as was recently pointed out by Deakin and Melroy for the case of underpotential deposition (27c), the...Microbalance Studies of Deposition and Dissolution Mechanisms of Electrochromic Films of Diheptylviologen Bromide 12. PERSONAL AUTHOR(S) Gregory S. Ostrom

  8. Mechanism of HERG potassium channel inhibition by tetra-n-octylammonium bromide and benzethonium chloride

    SciTech Connect

    Long, Yan; Lin, Zuoxian; Xia, Menghang; Zheng, Wei; Li, Zhiyuan

    2013-03-01

    Tetra-n-octylammonium bromide and benzethonium chloride are synthetic quaternary ammonium salts that are widely used in hospitals and industries for the disinfection and surface treatment and as the preservative agent. Recently, the activities of HERG channel inhibition by these compounds have been found to have potential risks to induce the long QT syndrome and cardiac arrhythmia, although the mechanism of action is still elusive. This study was conducted to investigate the mechanism of HERG channel inhibition by these compounds by using whole-cell patch clamp experiments in a CHO cell line stably expressing HERG channels. Tetra-n-octylammonium bromide and benzethonium chloride exhibited concentration-dependent inhibitions of HERG channel currents with IC{sub 50} values of 4 nM and 17 nM, respectively, which were also voltage-dependent and use-dependent. Both compounds shifted the channel activation I–V curves in a hyperpolarized direction for 10–15 mV and accelerated channel activation and inactivation processes by 2-fold. In addition, tetra-n-octylammonium bromide shifted the inactivation I–V curve in a hyperpolarized direction for 24.4 mV and slowed the rate of channel deactivation by 2-fold, whereas benzethonium chloride did not. The results indicate that tetra-n-octylammonium bromide and benzethonium chloride are open-channel blockers that inhibit HERG channels in the voltage-dependent, use-dependent and state-dependent manners. - Highlights: ► Tetra-n-octylammonium and benzethonium are potent HERG channel inhibitors. ► Channel activation and inactivation processes are accelerated by the two compounds. ► Both compounds are the open-channel blockers to HERG channels. ► HERG channel inhibition by both compounds is use-, voltage- and state dependent. ► The in vivo risk of QT prolongation needs to be studied for the two compounds.

  9. Bromidotetra-kis-(2-isopropyl-1H-imidazole-κN)copper(II) bromide.

    PubMed

    Godlewska, Sylwia; Socha, Joanna; Baranowska, Katarzyna; Dołęga, Anna

    2011-10-01

    The Cu(II) atom in the title salt, [CuBr(C(6)H(10)N(2))(4)]Br, is coordinated in a square-pyramidal geometry by four imidazole N atoms and one bromide anion that is located at the apex of the pyramid. The cations and the anions form a two-dimensional network parallel to (001) through N-H⋯Br hydrogen bonds.

  10. Laboratory Evaluation of Drop-in Solvent Alternatives to n-Propyl Bromide for Vapor Degreasing

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark A.; Lowrey, Nikki M.

    2012-01-01

    Based on this limited laboratory study, solvent blends of trans-1,2 dichloroethylene with HFEs, HFCs, or PFCs appear to be viable alternatives to n-propyl bromide for vapor degreasing. The lower boiling points of these blends may lead to greater solvent loss during use. Additional factors must be considered when selecting a solvent substitute, including stability over time, VOC, GWP, toxicity, and business considerations.

  11. Fast analysis of glycosaminoglycans by microchip electrophoresis with in situ fluorescent detection using ethidium bromide.

    PubMed

    Matsuno, Yu-ki; Kinoshita, Mitsuhiro; Kakehi, Kazuaki

    2005-03-09

    We analyzed some glycosaminoglycans and natural and artificial acidic polysaccharides using microchip electrophoresis in the buffer containing ethidium bromide, and found that they were successfully separated and detected within 150 s with comparable sensitivity with that of conventional electrophoresis using cellulose acetate membrane. We applied the technique to the analysis of glycosaminoglycans in pharmaceutical preparations and also in cultured cancer cells. Rapidness and easy operation of the proposed technique are quite useful for routine analysis of glycosaminoglycans.

  12. Uses of chloride/bromide ratios in studies of potable water

    USGS Publications Warehouse

    Davis, S.N.; Whittemore, D.O.; Fabryka-Martin, J.

    1998-01-01

    In natural ground water systems, both chlorine and bromine occur primarily as monovalent anions, chloride and bromide. Although dissolution or precipitation of halite, biological activity in the root zone, anion sorption, and exchange can affect chloride/bromide ratios in some settings, movement of the ions in potable ground water is most often conservative. Atmospheric precipitation will generally have mass ratios between 50 and 150; shallow ground water, between 100 and 200; domestic sewage, between 300 and 600; water affected by dissolution of halite, between 1000 and 10,000; and summer runoff from urban streets, between 10 and 100. These, and other distinctive elemental ratios, are useful in the reconstruction of the origin and movement of ground water, as illustrated by case studies investigating sources of salinity in ground water from Alberta, Kansas, and Arizona, and infiltration rates and pathways at Yucca Mountain, Nevada.In natural ground water systems, both chlorine and bromine occur primarily as monovalent anions, chloride and bromide. Although dissolution or precipitation of halite, biological activity in the root zone, anion sorption, and exchange can affect chloride/bromide ratios in some settings, movement of the ions in potable ground water is most often conservative. Atmospheric precipitation will generally have mass ratios between 50 and 150; shallow ground water, between 100 and 200; domestic sewage, between 300 and 600; water affected by dissolution of halite, between 1000 and 10,000; and summer runoff from urban streets, between 10 and 100. These, and other distinctive elemental ratios, are useful in the reconstruction of the origin and movement of ground water; as illustrated by case studies investigating sources of salinity in ground water from Alberta, Kansas, and Arizona, and infiltration rates and pathways at Yucca Mountain, Nevada.

  13. Study on Durability and Stability of an Aqueous Electrolyte Solution for Zinc Bromide Hybrid Flow Batteries

    NASA Astrophysics Data System (ADS)

    Kim, Donghyeon; Jeon, Joonhyeon

    2015-01-01

    Zinc-bromine flow battery using aqueous electrolyte has advantages of cost effective and high energy density, but there still remains a problem improving stability and durability of electrolyte materials during long-time cell operation. This paper focuses on providing a homogeneous aqueous solution for durability and stability of zinc bromide electrolyte. For performance experiments of conventional and proposed electrolyte solutions, detailed cyclic voltammetry (CV) measurements (at a scan rate of 20 mV s-1 in the range of -1.5 V~1.5 V) are carried out for 40 cycles and five kinds of electrolytes containing which has one of additives, such as (conventionally) zinc chloride, potassium chloride, (newly) lithium perchlorate, sodium perchlorate and zeolite-Y are compared with the 2.0 M ZnBr2 electrolyte, respectively. Experimental results show that using the proposed three additives provides higher anodic and cathodic peak current density of electrolytes than using other two conventional additives, and can lead to improved chemical reversibility of zinc bromide electrolyte. Especially, the solution of which the zeolite-Y added, shows enhanced electrochemical stability of zinc bromide electrolyte. Consequently, proposed electrolytes have a significant advantage in comparison with conventional electrolytes on higher stability and durability.

  14. Flight Experiment to Study Double-Diffusive Instabilities in Silver-Doped Lead Bromide Crystals

    NASA Technical Reports Server (NTRS)

    Singh, N. B.; Rosch, W. R.; Suhre, D. R.; Coriell, S. R.; Duval, W. M. B.

    1999-01-01

    A detailed study on the effect of convection on crystal quality was carried out by growing lead bromide crystals in transparent Bridgman furnace. Direct observations were made on the solid-liquid interface and a new kind of instability was observed. This could be explained on the basis of toroidal flow in the AgBr-doped lead bromide sample. With the increasing translation velocity, the interface changed from flat to depressed, and then formed a cavity in the center of the growth tube. The crystal grown at the lowest thermal Rayleigh number showed the highest quality and crystal grown at the largest thermal Rayleigh number showed the worst quality. Numerical studies were carried out to provide a framework for interpreting the observed convective and morphological instabilities, and to determine the critical (limiting) concentration of dopant for a particular growth velocity and gravity level. Theoretical instability diagrams were compared with data obtained from the experimental studies. These studies provided basic data on convective behavior in doped lead bromide crystals grown by the commercially important Bridgman process.

  15. Toxic impact of bromide and iodide on drinking water disinfected with chlorine or chloramines.

    PubMed

    Yang, Yang; Komaki, Yukako; Kimura, Susana Y; Hu, Hong-Ying; Wagner, Elizabeth D; Mariñas, Benito J; Plewa, Michael J

    2014-10-21

    Disinfectants inactivate pathogens in source water; however, they also react with organic matter and bromide/iodide to form disinfection byproducts (DBPs). Although only a few DBP classes have been systematically analyzed for toxicity, iodinated and brominated DBPs tend to be the most toxic. The objectives of this research were (1) to determine if monochloramine (NH2Cl) disinfection generated drinking water with less toxicity than water disinfected with free chlorine (HOCl) and (2) to determine the impact of added bromide and iodide in conjunction with HOCl or NH2Cl disinfection on mammalian cell cytotoxicity and genomic DNA damage induction. Water disinfected with chlorine was less cytotoxic but more genotoxic than water disinfected with chloramine. For both disinfectants, the addition of Br(-) and I(-) increased cytotoxicity and genotoxicity with a greater response observed with NH2Cl disinfection. Both cytotoxicity and genotoxicity were highly correlated with TOBr and TOI. However, toxicity was weakly and inversely correlated with TOCl. Thus, the forcing agents for cytotoxicity and genotoxicity were the generation of brominated and iodinated DBPs rather than the formation of chlorinated DBPs. Disinfection practices need careful consideration especially when using source waters containing elevated bromide and iodide.

  16. A Systematic Study on the Mesomorphic Behavior of Asymmetrical 1-Alkyl-3-dodecylimidazolium Bromides

    SciTech Connect

    Yang, Mei; Mallick, Bert; Mudring, Anja-Verena

    2014-04-02

    To determine the essential parameters for mesophase formation in imidazolium-based ionic liquids (ILs), a library of 1-alkyl-3-dodecylimidazolium bromides was synthesized, abbreviated as CnC12, where 0 ≤ n ≤ 13, as the general notion is that a dodecyl side chain would guarantee the formation of an ionic liquid crystal (ILC). All salts were fully characterized by NMR spectroscopy and mass spectrometry. Their thermal properties were recorded, and mesophase formation was assessed. An odd–even effect is observed for 5 ≤ n ≤ 10 in the temperatures of melting transitions. While the majority of this series, as expected, formed mesophases, surprisingly compounds C2C12 and C6C12 could not be classified as ILCs, the latter being a room temperature IL, while C2C12 is a crystalline solid with melting point at 37 °C. The single crystal structure of compound 1-ethyl-3-dodecylimidazolium bromide (C2C12) was successfully obtained. Remarkably, the arrangement of imidazolium cores in the structure is very complicated due to multiple nonclassical hydrogen bonds between bromide anions and imidazolium head groups. In this arrangement, neighboring imidazolium rings are forced by hydrogen bonds to form a “face-to-face” conformation. This seems to be responsible for the elimination of a mesophase. To conclude, the general view of a dodecyl chain being a functional group to generate a mesophase is not entirely valid.

  17. Transport of bromide measured by soil coring, suction plates, and lysimeters under transient flow conditions.

    NASA Astrophysics Data System (ADS)

    Kasteel, R.; Pütz, Th.; Vereecken, H.

    2003-04-01

    Lysimeter studies are one step within the registration procedure of pesticides. Flow and transport in these free-draining lysimeters do not reflect the field situation mainly because of the occurence of a zone of local saturation at the lower boundary (seepage face). The objective of this study is to evaluate the impact of flow and transport behaviour of bromide detected with different measuring devices (lysimeters, suction plates, and soil coring) by comparing experimental results with numerical simulations in heterogeneous flow domains. We applied bromide as a small pulse to the bare soil surface (Orthic Luvisol) of the three devices and the displacement of bromide was regurlarly sampled for three years under natural wheather conditions. Based on the mean breakthrough curves we observe experimentally that lysimeters have a lower effective pore-water velocity and exhibit more solute spreading resulting in a larger dispersivity than the suction plates. This can be ascribed to the artefact of the lower boundary. We performed numerical transport simulations in 2-D heterogeneous flow fields (scaling approach) choosing appropriate boundary conditions for the various devices. The simulations allow to follow the temporal evolution of flow and transport processes in the various devices and to gain additional process understanding. We conclude that the model is essentially capable to reproduce the main experimental findings only if we account for the spatial correlation structure of the hydraulic properties, i.e. soil heterogeneity.

  18. The influence of ipratropium bromide and sodium cromoglycate on benzalkonium chloride-induced bronchoconstriction in asthma.

    PubMed Central

    Miszkiel, K A; Beasley, R; Holgate, S T

    1988-01-01

    1. Benzalkonium chloride, an antibacterial preservative that is added to nebuliser solutions, has been shown to cause bronchoconstriction when inhaled by asthmatic subjects. 2. To investigate the potential role of reflex and mast cell-dependent mechanisms in the pathogenesis of bronchoconstriction produced by benzalkonium chloride we examined the effects of ipratropium bromide and sodium cromoglycate on this response in both concentration-response and time-course studies in nine asthmatic subjects. 3. Pretreatment with inhaled ipratropium bromide (1 mg) and sodium cromoglycate (40 mg) displaced the benzalkonium chloride concentration-response curves to the right by a mean 2.2 fold and 3.1 fold respectively. 4. Ipratropium bromide and sodium cromoglycate markedly attenuated the airway response to benzalkonium chloride throughout the 45 min time course period, inhibiting the overall response by 56% and 78% respectively. 5. We conclude that benzalkonium chloride provokes bronchoconstriction in asthmatic subjects through a combination of mast cell activation and stimulation of peripheral and central neural pathways. PMID:2972308

  19. Interaction of ozone and carbon dioxide with polycrystalline potassium bromide and its atmospheric implication

    NASA Astrophysics Data System (ADS)

    Levanov, Alexander V.; Isaikina, Oksana Ya.; Maksimov, Ivan B.; Lunin, Valerii V.

    2017-03-01

    It has been discovered for the first time that gaseous ozone in the presence of carbon dioxide and water vapor interacts with crystalline potassium bromide giving gaseous Br2 and solid salts KHCO3 and KBrO3. Molecular bromine and hydrocarbonate ion are the products of one and the same reaction described by the stoichiometric equation 2KBr(cr.) + O3(gas) + 2CO2(gas) + H2O(gas) → 2KHCO3(cr.) + Br2(gas) + O2(gas). The dependencies of Br2, KHCO3 and KBrO3 formation rates on the concentrations of O3 and CO2, humidity of initial gas mixture, and temperature have been investigated. A kinetic scheme has been proposed that explains the experimental regularities found in this work on the quantitative level. According to the scheme, the formation of molecular bromine and hydrocarbonate is due to the reaction between hypobromite BrO-, the primary product of bromide oxidation by ozone, with carbon dioxide and water; bromate results from consecutive oxidation of bromide ion by ozone Br- → +O3 , -O2 BrO- → +O3 , -O2 BrO2- → +O3, -O2 BrO3- .

  20. Room temperature synthesis of silver nanowires from tabular silver bromide crystals in the presence of gelatin

    SciTech Connect

    Liu Suwen; Wehmschulte, Rudolf J. . E-mail: rwehmsch@fit.edu; Lian Guoda; Burba, Christopher M.

    2006-03-15

    Long silver nanowires were synthesized at room temperature by a simple and fast process derived from the development of photographic films. A film consisting of an emulsion of tabular silver bromide grains in gelatin was treated with a photographic developer (4-(methylamino)phenol sulfate (metol), citric acid) in the presence of additional aqueous silver nitrate. The silver nanowires have lengths of more than 50 {mu}m, some even more than 100 {mu}m, and average diameters of about 80 nm. Approximately, 70% of the metallic silver formed in the reduction consists of silver nanowires. Selected area electron diffraction (SAED) results indicate that the silver nanowires grow along the [111] direction. It was found that the presence of gelatin, tabular silver bromide crystals and silver ions in solution are essential for the formation of the silver nanowires. The nanowires appear to originate from the edges of the silver bromide crystals. They were characterized by transmission electron microscopy (TEM), SAED, scanning electron microscopy (SEM), and powder X-ray diffraction (XRD)

  1. Enhancement of pool boiling heat transfer to lithium bromide aqueous solution

    NASA Astrophysics Data System (ADS)

    Kaji, Masuo; Furukawa, Masahiro; Suyama, Takayuki; Sekoguchi, Kotohiko

    1995-04-01

    An experimental study on enhancement of nucleate pool boiling heat transfer by placing a sponge metal, which had a three-dimensional mesh structure like sponge, close to a plain smooth heat transfer surface was conducted to improve the heat transfer performance of the high temperature generator of absorption chiller/heaters. Boiling curves of water and lithium bromide aqueous solution of mass concentration of 55 to 58% at the atmospheric pressure were presented. Heat transfer characteristics were improved by two to three times both for water and lithium bromide aqueous solution when the sponge metal was attached with an appropriate clearance. Three kinds of sponge metals were tested for lithium bromide aqueous solution under a reduced pressure (24 kPa). The sponge metal #6, which had the finest mesh among the three sponge metals, brought about excellent results at lower heat fluxes, but it caused deterioration of heat transfer at higher heat fluxes. For the wide range of heat flux (5 x 10(exp 4) approximately 2 x 10(exp 5) W/m(exp 2), it was found that the sponge metal #4 with the middle fineness was the most suitable and the optimal clearance was in the range of 0.1 approximately 0.5 mm. The employment of sponge metals for enhancing boiling heat transfer is practically excellent, since no special manufacturing is required to mount them on the heated surface.

  2. Enhancement of Pool Boiling Heat Transfer to Lithium Bromide Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Furukawa, Masahiro; Kaji, Masuo; Suyama, Takayuki; Sekoguchi, Kotohiko

    An experimental study on enhancement of nucleate pool boiling heat tranfer by placing a sponge metal close to a plain heated surface was conducted in order to improve the heat transfer performance of the high temperature generator of absorption chiller/heater. The sponge metal has three dimensional porous mesh framework like sponge. Boiling curves of water under the atmospheric pressure were compared with those of lithium bromide aqueous solution of mass concentration 55 to 58%. Heat transfer characteristics were improved by 2 to3 times both for water and lithium bromide aqueous solution when the sponge metal was placed on the heated surface with and without cleareance. Three kinds of sponge metals were used for lithium bromide aqueous solution under the reduced pressure (24 kPa). At lower heat fluxes,#6 sponge metal which has the finest mesh and the lowest porosity shows excellent results. At high heat fluxes, however,it causes deterioration of heat transfer. Over the wide range of heat fluxes,# 4 sponge metal was found to be most suitable and the optimal clearence was determined as 0.5 mm. The sponge metal is of good practical use as a device to enhance the boiling, since no special manufacturing is required for placing it on the heated surface.

  3. Continuous Inhalation of Ipratropium Bromide for Acute Asthma Refractory to β2-agonist Treatment.

    PubMed

    Koumbourlis, Anastassios C; Mastropietro, Christopher

    2015-01-01

    To present the case of a patient with persistent bronchospasm, refractory to treatment with β2-agonists, that resolved promptly with continuous inhalation of large dose (1000 mcg/hr) ipratropium bromide, and to discuss the possibility of tolerance to β2-agonists as the cause for his failure to respond to adrenergic medications. The patient had received multiple doses of albuterol, as well as subcutaneous terbutaline (0.3 mg), intravenous magnesium sulfate (1 g) and intravenous dexamethasone (10 mg) prior to his admission to the intensive care unit. He remained symptomatic despite systemic intravenous steroids, continuous intravenous terbutaline (up to 0.6 mcg/kg/min), and continuous nebulized albuterol (up to 20 mg/hr for 57 hr) followed by 49 hours of continuous levalbuterol (7 mg/hr). Due to the lack of response, all β2-agonists were discontinued at 106 hours post-admission, and he was started on large dose ipratropium bromide (1000 mcg/hr) by continuous nebulization. Clinical improvement was evident within 1 hour and complete resolution of his symptoms within 4 hours. Continuous inhalation of large dose ipratropium bromide may be an effective regimen for the treatment of patients hospitalized with acute asthma who are deemed to be nonresponsive and/or tolerant to β2-agonist therapy.

  4. Granular Activated Carbon Treatment May Result in Higher Predicted Genotoxicity in the Presence of Bromide.

    PubMed

    Krasner, Stuart W; Lee, Tiffany Chih Fen; Westerhoff, Paul; Fischer, Natalia; Hanigan, David; Karanfil, Tanju; Beita-Sandí, Wilson; Taylor-Edmonds, Liz; Andrews, Robert C

    2016-09-06

    Certain unregulated disinfection byproducts (DBPs) are more of a health concern than regulated DBPs. Brominated species are typically more cytotoxic and genotoxic than their chlorinated analogs. The impact of granular activated carbon (GAC) on controlling the formation of regulated and selected unregulated DBPs following chlorine disinfection was evaluated. The predicted cyto- and genotoxicity of DBPs was calculated using published potencies based on the comet assay for Chinese hamster ovary cells (assesses the level of DNA strand breaks). Additionally, genotoxicity was measured using the SOS-Chromotest (detects DNA-damaging agents). The class sum concentrations of trihalomethanes, haloacetic acids, and unregulated DBPs, and the SOS genotoxicity followed the breakthrough of dissolved organic carbon (DOC), however the formation of brominated species did not. The bromide/DOC ratio was higher than the influent through much of the breakthrough curve (GAC does not remove bromide), which resulted in elevated brominated DBP concentrations in the effluent. Based on the potency of the haloacetonitriles and halonitromethanes, these nitrogen-containing DBPs were the driving agents of the predicted genotoxicity. GAC treatment of drinking or reclaimed waters with appreciable levels of bromide and dissolved organic nitrogen may not control the formation of unregulated DBPs with higher genotoxicity potencies.

  5. Leisingera methylohalidivorans gen. nov., sp. nov., a marine methylotroph that grows on methyl bromide

    USGS Publications Warehouse

    Schaefer, J.K.; Goodwin, K.D.; McDonald, I.R.; Murrell, J.C.; Oremland, R.S.

    2002-01-01

    A marine methylotroph, designated strain MB2T, was isolated for its ability to grow on methyl bromide as a sole carbon and energy source. Methyl chloride and methyl iodide also supported growth, as did methionine and glycine betaine. A limited amount of growth was observed with dimethyl sulfide. Growth was also noted with unidentified components of the complex media marine broth 2216, yeast extract and Casamino acids. No growth was observed on methylated amines, methanol, formate, acetate, glucose or a variety of other substrates. Growth on methyl bromide and methyl iodide resulted in their oxidation to CO2 with stoichiometric release of bromide and iodide, respectively. Strain MB2T exhibited growth optima at NaCl and Mg2+ concentrations similar to that of seawater. Phylogenetic analysis of the 16S rDNA sequence placed this strain in the ??-Proteobacteria in proximity to the genera Ruegeria and Roseobacter. It is proposed that strain MB2T (= ATCC BAA-92T = DSM 14336T) be designated Leisingera methylohalidivorans gen. nov., sp. nov.

  6. Improving food and agriculture productivity and the environment: Canadian initiatives in methyl bromide alternatives and emission control technologies. Revised edition

    SciTech Connect

    Marcotte, M.; Tibelius, C.

    1998-12-31

    Methyl bromide, a fumigant used in the agricultural sector, was listed as an ozone-depleting substance under the Montreal Protocol and is scheduled for phasing out in Canada. This report begins with a review of the joint industry/government approach being taken to plan and manage this phase-out. It then reviews alternative solutions that have been formulated and tested as replacements for the use of methyl bromide in greenhouse cultivation, soil fumigation, strawberry transplant production, tobacco production, grain production, and food processing facilities. Contact names and addresses are provided for those seeking further information. The final sections describe activities in methyl bromide recovery and recycling and list industry and government organizations that have expertise in methyl bromide alternatives.

  7. Detection of water contamination from hydraulic fracturing wastewater: a μPAD for bromide analysis in natural waters.

    PubMed

    Loh, Leslie J; Bandara, Gayan C; Weber, Genevieve L; Remcho, Vincent T

    2015-08-21

    Due to the rapid expansion in hydraulic fracturing (fracking), there is a need for robust, portable and specific water analysis techniques. Early detection of contamination is crucial for the prevention of lasting environmental damage. Bromide can potentially function as an early indicator of water contamination by fracking waste, because there is a high concentration of bromide ions in fracking wastewaters. To facilitate this, a microfluidic paper-based analytical device (μPAD) has been developed and optimized for the quantitative colorimetric detection of bromide in water using a smartphone. A paper microfluidic platform offers the advantages of inexpensive fabrication, elimination of unstable wet reagents, portability and high adaptability for widespread distribution. These features make this assay an attractive option for a new field test for on-site determination of bromide.

  8. Estimating Potential Increased Bladder Cancer Risk Due to Increased Bromide Concentrations in Sources of Disinfected Drinking Waters - slides

    EPA Science Inventory

    Public water systems are increasingly facing higher bromide levels in their source waters from anthropogenic contamination through coal-fired powerplants, conventional oil and gas extraction, and hydraulic fracturing. Climate change is likely to exacerbate this in coming years. W...

  9. Estimating Potential Increased Bladder Cancer Risk Due to Increased Bromide Concentrations in Sources of Disinfected Drinking Waters

    EPA Science Inventory

    Public water systems are increasingly facing higher bromide levels in their source waters from anthropogenic contamination through coal-fired power plants, conventional oil and gas extraction, and hydraulic fracturing. Climate change is likely to exacerbate this in coming years. ...

  10. Scenario Analysis of the Impact on Drinking Water Intakes from Bromide in the Discharge of Treated Oil and Gas Wastewater

    EPA Pesticide Factsheets

    EPA scientists created different scenarios for conventional commercial wastewater treatment plants that treat oil and gas wastewaters to evaluate the impact from bromide in discharges by the CWTP plants.

  11. Trihalomethane formation by chlorination of ammonium- and bromide-containing groundwater in water supplies of Hanoi, Vietnam.

    PubMed

    Duong, Hong Anh; Berg, Michael; Hoang, Minh Hang; Pham, Hung Viet; Gallard, Hervé; Giger, Walter; von Gunten, Urs

    2003-07-01

    The occurrence and the fate of trihalomethanes (THMs) in the water supply system of Hanoi City, Vietnam was investigated from 1998 to 2001. The chlorination efficiency, THM speciation, and, THM formation potential (THMFP) was determined in the water works and in tap water. With regard to THM formation, three types of groundwater resources were identified: (I) high bromide, (II) low bromide, and (III) high bromide combined with high ammonia and high dissolved organic carbon (DOC) concentrations. Under typical treatment conditions (total chlorine residual 0.5-0.8 mg/L), the total THM formation was always below WHO, EU, and USEPA drinking water standards and decreased in the order type I > type II > type III, although the THMFP was > 400 micrograms/L for type III water. The speciation showed > 80% of bromo-THMs in type I water due to the noticeable high bromide level (< or = 140 micrograms/L). In type II water, the bromo-THMs still accounted for some 40% although the bromide concentration is significantly lower (< or = 30 micrograms/L). In contrast, only traces of bromo-THMs were formed (approximately 5%) in type III water, despite bromide levels were high (< or = 240 micrograms/L). This observation could be explained by competition kinetics of chlorine reacting with ammonia and bromide. Based on chlorine exposure (CT) estimations, it was concluded that the current chlorination practice for type I and II waters is sufficient for > or = 2-log inactivation of Giardia lamblia cysts. However, in type III water the applied chlorine is masked as chloramine with a much lower disinfection efficiency. In addition to high levels of ammonia, type III groundwater is also contaminated by arsenic that is not satisfactory removed during treatment. N-nitrosodimethylamine, a potential carcinogen suspected to be formed during chloramination processes, was below the detection limit of 0.02 microgram/L in type III water.

  12. Examining the interrelationship between DOC, bromide and chlorine dose on DBP formation in drinking water--a case study.

    PubMed

    Bond, Tom; Huang, Jin; Graham, Nigel J D; Templeton, Michael R

    2014-02-01

    During drinking water treatment aqueous chlorine and bromine compete to react with natural organic matter (NOM). Among the products of these reactions are potentially harmful halogenated disinfection by-products, notably four trihalomethanes (THM4) and nine haloacetic acids (HAAs). Previous research has concentrated on the role of bromide in chlorination reactions under conditions of a given NOM type and/or concentration. In this study different concentrations of dissolved organic carbon (DOC) from U.K. lowland water were reacted with varying amounts of bromide and chlorine in order to examine the interrelationship between the three reactants in the formation of THM4, dihaloacetic acids (DHAAs) and trihaloacetic acids (THAAs). Results showed that, in general, molar yields of THM4 increased with DOC, bromide and chlorine concentrations, although yields did fluctuate versus chlorine dose. In contrast both DHAA and THAA yields were mainly independent of changes in bromide and chlorine dose at low DOC (1 mg·L(-1)), but increased with chlorine dose at higher DOC concentrations (4 mg·L(-1)). Bromine substitution factors reached maxima of 0.80, 0.67 and 0.65 for the THM4, DHAAs and THAAs, respectively, at the highest bromide/chlorine ratio studied. These results suggest that THM4 formation kinetics depend on both oxidation and halogenation steps, whereas for DHAAs and THAAs oxidation steps are more important. Furthermore, they indicate that high bromide waters may prove more problematic for water utilities with respect to THM4 formation than for THAAs or DHAAs. While mass concentrations of all three groups increased in response to increased bromide incorporation, only the THMs also showed an increase in molar yield. Overall, the formation behaviour of DHAA and THAA was more similar than that of THM4 and THAA.

  13. Enhanced degradation of the volatile fumigant-nematicides 1,3-d and methyl bromide in soil.

    PubMed

    Ou, L T

    1998-03-01

    The use of the gaseous funaigant-nematicide methyl bromide in agriculture is scheduled to be phased out in the year 2001.1,3-Dichloropropene (1,3-D) in combination with chloropicrin and an herbicide is considered to be a viable alternative to methyl bromide for some crops. 1,3-Dichloropropene consists of two isomers, cis- and trans-l,3-D. A number of soil bacteria have been shown to initially degrade 1,3-D or one of its isomers, cis-l,3-D, via hydrolysis. Until recently, the degradation of cis- and trans-l,3-D in soils was considered to exhibit similar kinetics, witla their degradation rates increasing with increases in soil temperature. Enhanced degradation of 1,3-D in soil from a site in Florida with a history of repeated annual applications of 1,3-D was observed in 1994. Biological hydrolysis was involved in the initial degradation of cis- and trans-l,3-D. The two isomers were degraded at different rates, with the trans isomer being degraded more rapidly than the cis isomer. Cis- and trans-l,3-D in soil from the control site were degraded at a similar rate but more slowly than in the enhanced soil. Methyl bromide in soils can be degraded through chemical hydrolysis and methylation to soil organic matter. Some methanotrophic bacteria and ammonia-oxidation bacteria during the oxidation of their primary substrates (methane and ammonia) also have the capacity to cooxidize methyl bromide to formaldehyde and bromide ion. It was recently observed that degradation of methyl bromide was stimulated in methanotrophic soils and in soils treated with ammonium sulfate. Soil methanotrophic bacteria and soil nitrifiers are apparently responsible for cooxidation of methyl bromide in methanotrophic and ammonia treated soils, respectively.

  14. The structure of adsorbed bromide concurrent with the underpotential deposition (UPD) of Cu on Pt(111)

    NASA Astrophysics Data System (ADS)

    Marković, Nenad M.; Lucas, Chris A.; Gasteiger, Hubert A.; Ross, Philip N.

    1997-02-01

    The adsorption of bromide anions concurrent with the underpotential deposition (UPD) of Cu on Pt(111) was examined utilizing ex-situ LEED and in-situ surface X-ray scattering for structure determination, in combination with coverage determination by rotating ring disk flux measurements with the Pt(111) single crystal as the disk electrode. The results show definitively that Cu UPD on Pt(111) in the presence of bromide is a two-step process, with the total amount of Cu deposited at underpotentials ˜0.95 ± 5% ML (1 ML = 1 adatom per Pt atom). The results also indicate that the surface coverage by adsorbed bromide undergoes only a small (<0.05 ML) change upon the deposition of Cu, even up to a nominal monolayer. We propose a model wherein the first stage of deposition occurs by displacement of the close-packed hexagonal layer of Br adatoms by Cu adatoms through a "turn-over" process, in which Cu is sandwiched between the Pt surface and the Br overlayer, leading to the formation of an ordered Pt(111)CuBr bilayer intermediate phase which closely resembles the (111) planes of the Cu(I)Br crystal. The coverage of both Cu and Br in this intermediate phase is ˜0.5 ML. The second stage is the filling-in of the Cu plane of the bilayer to form a pseudomorphic (1 × 1) Cu monolayer and a disordered Br adlayer with a coverage of ˜0.4 ML. The same mechanism is suggested for Cu UPD on Pt(111) in solutions containing chloride anions.

  15. Aerodynamic measurements of methyl bromide volatilization from tarped and nontarped fields

    USGS Publications Warehouse

    Majewski, M.S.; McChesney, M.M.; Woodrow, J.E.; Prueger, J.H.; Seiber, J.N.

    1995-01-01

    Methyl bromide (MeBr) is used extensively in agriculture as a soil fumigant and there is growing concern over the role it may play in the depletion of stratospheric ozone. Methyl bromide is applied using various techniques and very little is known about how much of the applied fumigant volatilizes into the atmosphere after the application. This held study was designed to estimate the post-application methyl bromide volatilization loss rates from two different application practices. The fields were approximately 6 km apart in Monterey County, California, and were treated in conformity with local practices as of 1992. The MeBr was injected at a depth of 25 to 30 cm. One field was covered simultaneously with a high-barrier plastic film tarp during the application, and the other was left uncovered, but the furrows made by the injection shanks were bedded over. Volatilization fluxes were estimated using an aerodynamic-gradient technique immediately following the completion of the application process and continued for 9 d for the tarped held and 6 d for the nontarped field. The cumulative volatilization losses from the tarped field were 22% of the nominal application within the first 5 d of the experiment and about 32% of the nominal application within 9 d including the one day after the tarp was removed on Day 8 after application. In contrast, the nontarped field lost 89% of the nominal application by volatilization in 5 d. The volatilization rate from the tarped field was shown to he significantly lower than the nontarped field at a 95% confidence level.

  16. Aerodynamic measurements of methyl bromide volatilization from tarped and nontarped fields

    SciTech Connect

    Majewski, M.S.; McChesney, M.M.; Woodrow, J.E.; Seiber, J.N.

    1995-07-01

    Methyl bromide (MeBr) is used extensively in agriculture as a soil fumigant and there is growing concern over the role it may play in the depletion of stratospheric ozone. Methyl bromide is applied using various techniques and very little is known about how much of the applied fumigant volatilizes into the atmosphere after the application. This field study was designed to estimate the post-application methyl bromide volatilization loss rates from two different application practices. The fields were approximately 6 km apart in Monterey County, California, and were treated in conformity with local practices as of 1992. The MeBr was injected at a depth of 25 to 30 cm. One field was covered simultaneously with a high-barrier plastic film tarp during the application, and the other was left uncovered, but the furrows made by the injection shanks were bedded over. Volatilization fluxes were estimated using an aerodynamic-gradient technique immediately following the completion of the application process and continued for 9 d for the tarped field and 6 d for the nontarped field. The cumulative volatilization losses from the tarped field were 22% of the nominal application within the first 5 d of the experiment and about 32% of the nominal application within 9 d including the one day after the tarp was removed on Day 8 after application. In contrast, the nontarped field lost 89% of the nominal application by volatilization in 5 d. The volatilization rate from the tarped field was shown to be significantly lower than the nontarped field at a 95% confidence level. 43 refs., 5 figs., 3 tabs.

  17. Measurement and computation of movement of bromide ions and carbofuran in ridged humic-sandy soil.

    PubMed

    Leistra, Minze; Boesten, Jos J T I

    2010-07-01

    Water flow and pesticide transport in the soil of fields with ridges and furrows may be more complex than in the soil of more level fields. Prior to crop emergence, the tracer bromide ion and the insecticide carbofuran were sprayed on the humic-sandy soil of a potato field with ridges and furrows. Rainfall was supplemented by sprinkler irrigation. The distribution of the substances in the soil profile of the ridges and furrows was measured on three dates in the potato growing season. Separate ridge and furrow systems were simulated by using the pesticide emission assessment at regional and local scales (PEARL) model for pesticide behavior in soil-plant systems. The substances travelled deeper in the furrow soil than in the ridge soil, because of runoff from the ridges to the furrows. At 19 days after application, the peak of the bromide distribution was measured to be in the 0.1-0.2 m layer of the ridges, while it was in the 0.3-0.5 m layer of the furrows. After 65 days, the peak of the carbofuran distribution in the ridge soil was still in the 0.1 m top layer, while the pesticide was rather evenly distributed in the top 0.6 m of the furrow soil. The wide ranges in concentration measured with depth showed that preferential water flow and substance transport occurred in the sandy soil. Part of the bromide ion distribution was measured to move faster in soil than the computed wave. The runoff of water and pesticide from the ridges to the furrows, and the thinner root zone in the furrows, are expected to increase the risk of leaching to groundwater in ridged fields, in comparison with more level fields.

  18. Bromide oxidation by ferrate(VI): The formation of active bromine and bromate.

    PubMed

    Jiang, Yanjun; Goodwill, Joseph E; Tobiason, John E; Reckhow, David A

    2016-06-01

    Ferrate (VI) (abbreviated as Fe(VI)) has long been considered as a green oxidant that does not produce any known hazardous byproducts. However, this work shows that Fe(VI) can slowly oxidize bromide forming active bromine (HOBr/OBr(-)) and bromate, and in natural waters total organic bromine (TOBr) can also be detected. Results showed that the highest levels of active bromine and bromate were formed at lower pHs and in the absence of phosphate. Hydrogen peroxide, which forms from the reaction of Fe(VI) and water, plays an essential role in suppressing bromate formation by reducing active bromine back to bromide. Fe(VI) decomposition products (assumed to be particulate phase Fe(III)) can catalyze the decomposition of hydrogen peroxide by Fe(VI). Phosphate had a substantial inhibiting effect on the formation of active bromine, but less so on bromate formation. The presence of the raw water matrix in natural water suppressed bromate formation. For a natural water spiked with 0.1 mg/L of bromide, the bromate and TOBr concentrations after Fe(VI) oxidation were below 3.0 and 15 μg/L, respectively. No consistent trend regarding the effect of pH or buffer ions on TOBr formation was observed due to the competition between Fe(VI), hydrogen peroxide, and natural organic matter (NOM) for reaction with active bromine. Under environmentally relevant conditions, the formation of bromate and TOBr would not be a problem for Fe(VI) application as their concentration levels are quite low.

  19. Ipratropium bromide-mediated myocardial injury in in vitro models of myocardial ischaemia/reperfusion.

    PubMed

    Harvey, Kate L; Hussain, Afthab; Maddock, Helen L

    2014-04-01

    Ipratropium bromide, a nonselective muscarinic antagonist, is widely prescribed for the treatment of chronic obstructive pulmonary disease (COPD). Analyses of COPD patients, with underlying ischaemic heart disease, receiving anticholinergics, have indicated increased risk of severity and occurrence of cardiovascular events (including myocardial infarction). The present study explored whether ipratropium bromide induces myocardial injury in nonclinical models of simulated myocardial ischaemia/reperfusion injury. Adult Sprague Dawley rat hearts/primary ventricular myocytes were exposed to simulated ischaemia/hypoxia prior to administration of ipratropium at the onset of reperfusion/reoxygenation. Infarct to risk ratio and cell viability was measured via triphenyl tetrazolium chloride staining and thiazolyl blue tetrazolium bromide (MTT) assay. The involvement of apoptosis and necrosis was evaluated by flow cytometry. Mitochondrial-associated responses were detected by tetramethylrhodamine methyl ester fluorescence and myocyte contracture. Ipratropium (1 × 10⁻¹¹ M - 1 × 10⁻⁴ M) significantly increased infarct/risk ratio and decreased cell viability in a dose-dependent manner. Increased levels of necrosis and apoptosis were observed via flow cytometry, accompanied by increased levels of cleaved caspase-3 following ipratropium treatment. Levels of endogenous myocardial acetylcholine were verified via use of an acetylcholine assay. In these experimental models, exogenous acetylcholine (1 × 10⁻⁷ M) showed protective properties, when administered alone, as well as abrogating the exacerbation of myocardial injury during ischaemia/reperfusion following ipratropium coadministration. In parallel experiments, under conditions of myocardial ischaemia/reperfusion, a similar injury was observed following atropine (1 × 10⁻⁷ M) administration. These data demonstrate for the first time in a nonclinical setting that ipratropium exacerbates ischaemia

  20. Measurement and Computation of Movement of Bromide Ions and Carbofuran in Ridged Humic-Sandy Soil

    PubMed Central

    Boesten, Jos J. T. I.

    2009-01-01

    Water flow and pesticide transport in the soil of fields with ridges and furrows may be more complex than in the soil of more level fields. Prior to crop emergence, the tracer bromide ion and the insecticide carbofuran were sprayed on the humic-sandy soil of a potato field with ridges and furrows. Rainfall was supplemented by sprinkler irrigation. The distribution of the substances in the soil profile of the ridges and furrows was measured on three dates in the potato growing season. Separate ridge and furrow systems were simulated by using the pesticide emission assessment at regional and local scales (PEARL) model for pesticide behavior in soil–plant systems. The substances travelled deeper in the furrow soil than in the ridge soil, because of runoff from the ridges to the furrows. At 19 days after application, the peak of the bromide distribution was measured to be in the 0.1–0.2 m layer of the ridges, while it was in the 0.3–0.5 m layer of the furrows. After 65 days, the peak of the carbofuran distribution in the ridge soil was still in the 0.1 m top layer, while the pesticide was rather evenly distributed in the top 0.6 m of the furrow soil. The wide ranges in concentration measured with depth showed that preferential water flow and substance transport occurred in the sandy soil. Part of the bromide ion distribution was measured to move faster in soil than the computed wave. The runoff of water and pesticide from the ridges to the furrows, and the thinner root zone in the furrows, are expected to increase the risk of leaching to groundwater in ridged fields, in comparison with more level fields. PMID:20041324

  1. Mixed micelles of benzyldimethyltetradecylammonium chloride with tetradecyltrimethylammonium and tetradecyltriphenylphosphonium bromides: a head group contribution.

    PubMed

    Bakshi, Mandeep Singh; Kaur, Ishpinder; Sood, Rohit; Singh, Jasmeet; Singh, Kulbir; Sachar, Shweta; Singh, Kanwar Jit; Kaur, Gurinder

    2004-03-01

    Mixed micelle formation by tetradecyltrimethylammonium (TTAB) and tetradecyltriphenylphosphonium bromides (TTPB) with benzyldimethyltetradecylammonium chloride (BTDACl) was studied with the help of conductivity and Kraft point measurements. The BTDACl + TTAB mixtures showed synergistic interactions whereas those of BTDACl + TTPB indicated weak antagonistic behavior. From Kraft temperature measurements, the enthalpy of fusion (H(1)(0)) from solid hydrated BTDACl to the liquid state in the presence of TTAB or TTPB was computed. It was found that DeltaH(1)(0) was much more positive for BTDACl + TTPB than for BTDACl + TTAB mixtures.

  2. Copper(I) Bromide: An Alternative Emitter for Blue-Colored Flame Pyrotechnics.

    PubMed

    Juknelevicius, Dominykas; Karvinen, Eero; Klapötke, Thomas M; Kubilius, Rytis; Ramanavicius, Arunas; Rusan, Magdalena

    2015-10-19

    Copper(I) bromide was evaluated as an alternative emitter for blue flame pyrotechnic compositions. CuBr and CuCl emission spectra were recorded from a butane torch flame and compared. Cu(BrO3 )2 was synthesized and used in pyrotechnic compositions as an oxidizer and the source for the generation of CuBr species. Pyrotechnic compositions, which contained copper and potassium bromates as oxidizers, were optimized for the generation of blue flames. The experimental data, including emission spectra of the flames, chromaticity coordinates, burning rates, luminous intensities, and sensitivity tests, were analyzed and compared.

  3. The effect of ethidium bromide on the liquid crystalline phases of aqueous DNA.

    PubMed

    Gottarelli, G; Spada, G P; Mariani, P; Miranda de Morais, M

    1991-01-01

    The influence of the intercalation of ethidium bromide (EB) on the characteristics of the DNA cholesteric and hexagonal mesophases is studied by optical microscopy, circular dichroism, and X-ray diffraction. The distance between DNA rods in the hexagonal phase is not modified by the presence of EB whereas the pitch of the cholesteric mesophase is considerably shortened by the dye. This seems to be related to the stereochemical effect of the intercalation rather than to the presence of a random distribution of the positive charge of the dye.

  4. Synthesis of Allenamides by Copper-Catalyzed Coupling of Propargylic Bromides and Nitrogen Nucleophiles.

    PubMed

    Demmer, Charles S; Benoit, Emeline; Evano, Gwilherm

    2016-03-18

    An efficient and general synthesis of allenamides derived from oxazolidinones and hydantoins is reported. Upon activation with a combination of a copper catalyst and a 2,2'-bipyridine derivative in the presence of an inorganic base, propargylic bromides were found to be suitable reagents for the direct allenylation of nitrogen nucleophiles by a formal copper-catalyzed S(N)2' reaction. Besides the availability of the starting materials, notable features of this route to allenamides are its mild reaction conditions, the reaction being performed at room temperature in most cases, and its applicability to the preparation of mono-, di-, as well as trisubstituted allenamides.

  5. Corrosion inhibition in lithium bromide absorption fluid for advanced and current absorption cycle machines

    SciTech Connect

    Verma, S.K.; Mekhjian, M.S.; Sandor, G.R.; Nakada, N.

    1999-07-01

    This paper presents the results of a novel corrosion inhibitor that exhibits improved protection of carbon steel over the inhibitors currently in practice. This inhibitor, formulated in 65 wt% lithium bromide solution, offers excellent corrosion protection to carbon steel. Corrosion rates were determined using autoclave coupon testing. The corrosion rate in the 300 F to 450 F range was found to be low (1 to 4 mils per year), and the product also showed very low hydrogen generation (0.03 mg/in.{sup 2} of carbon steel per week). The metal was protected with a stable and adherent film.

  6. Thermal and optical studies of some di-methyl-di-alkyl ammonium bromides

    NASA Astrophysics Data System (ADS)

    Witko, Waclaw; Godlewska, Malgorzata; Dynarowicz, Patrycja

    1998-01-01

    Phase situation of homologous series of di-alkyl-di-methyl ammonium bromides represented by the general formula: 2CnN+2C1Br-, with n equals 10, 12, 14, 16, 18, was investigated by means of differential scanning calorimetry and optical microscopy methods in the temperature range 20-180 degrees C. A more complex polymorphism as already reported was detected. All the compounds studied show at least tow anomalies on the DSC curves. The high-temperature phase which appears below the isotropic phase has lancet-like dendritic texture which can be attributed to SmB phase. The enthalpy changes at the transitions were calculated.

  7. Nitrate ion photolysis in thin water films in the presence of bromide ions.

    PubMed

    Richards, Nicole K; Wingen, Lisa M; Callahan, Karen M; Nishino, Noriko; Kleinman, Michael T; Tobias, Douglas J; Finlayson-Pitts, Barbara J

    2011-06-16

    Nitrate ions commonly coexist with halide ions in aged sea salt particles, as well as in the Arctic snowpack, where NO(3)(-) photochemistry is believed to be an important source of NO(y) (NO + NO(2) + HONO + ...). The effects of bromide ions on nitrate ion photochemistry were investigated at 298 ± 2 K in air using 311 nm photolysis lamps. Reactions were carried out using NaBr/NaNO(3) and KBr/KNO(3) deposited on the walls of a Teflon chamber. Gas phase halogen products and NO(2) were measured as a function of photolysis time using long path FTIR, NO(y) chemiluminescence and atmospheric pressure ionization mass spectrometry (API-MS). Irradiated NaBr/NaNO(3) mixtures show an enhancement in the rates of production of NO(2) and Br(2) as the bromide mole fraction (χ(NaBr)) increased. However, this was not the case for KBr/KNO(3) mixtures where the rates of production of NO(2) and Br(2) remained constant over all values of χ(KBr). Molecular dynamics (MD) simulations show that the presence of bromide in the NaBr solutions pulls sodium toward the solution surface, which in turn attracts nitrate to the interfacial region, allowing for more efficient escape of NO(2) than in the absence of halides. However, in the case of KBr/KNO(3), bromide ions do not appreciably affect the distribution of nitrate ions at the interface. Clustering of Br(-) with NO(3)(-) and H(2)O predicted by MD simulations for sodium salts may facilitate a direct intermolecular reaction, which could also contribute to higher rates of NO(2) production. Enhanced photochemistry in the presence of halide ions may be important for oxides of nitrogen production in field studies such as in polar snowpacks where the use of quantum yields from laboratory studies in the absence of halide ions would lead to a significant underestimate of the photolysis rates of nitrate ions.

  8. Phase diagram of tetradecyltrimethylammonium bromide (TTAB) + water + octanol system with application of mechanical deformation

    NASA Astrophysics Data System (ADS)

    Yavuz, Aykut Evren; Masalci, Özgür; Kazanci, Nadide

    2014-11-01

    Morphological properties of tetradecyltrimethylammonium bromide (TTAB) + water + octanol system in different concentrations have been studied. In the process, isotropic phase (L1) and nematic calamitic (NC), nematic discotic (ND), hexagonal E and lamellar D anizotropic mesophases have been determined by polarizing microscopy method and partial ternary phase diagram of the system set up. Textural properties of the anisotropic mesophases of the system have been discussed and their birefringence values measured. Mechanical deformation has been applied to the mesophases. The textural properties and the birefringence values have been observed to be changed by the deformation, after and before which changes have been compared.

  9. A New, More Stable Polymorphic Form of Otilonium Bromide: Solubility, Crystal Structure, and Phase Transformation.

    PubMed

    Vega, Daniel R; Halac, Emilia; Segovia, Luciano; Baggio, Ricardo

    2016-10-01

    A new polymorphic form of otilonium bromide is presented (Form I), and a thorough analysis of its crystal and molecular structure is performed. The compound suffers a temperature-driven first-order phase transition at about 396 K, which transforms it into the polymorph reported by Dapporto P and Sega A (Acta Cryst. 1986;C42:474-478) (Form II). Through thermal analysis and solubility experiments the relative stability of both crystal modifications were determined, confirming that at room temperature this new Form I is the more stable one, Form II existing just in a metastable state.

  10. Pharmacological mydriasis secondary to ipratropium bromide: a cause of unilateral dilated pupil.

    PubMed

    Sharma, Neil S; Ooi, Ju-Lee; Papalkar, Daya; Sharma, Shanel; Francis, Ian C; Fung, Victor S C

    2008-03-01

    Ipratropium bromide is a commonly used bronchodilator which has been rarely reported to cause pharmacological mydriasis. We report a 22-year-old woman using 6-hourly nebulised ipratropium from a multi-dose preparation, who presented with a unilateral dilated pupil which resolved spontaneously over 24h after discontinuation of her ill-fitting nebuliser mask which had been directing the drug toward that eye. No alternative cause was found despite extensive investigations. Greater recognition of this iatrogenic cause of reversible pupillary dilatation may avoid the need for unnecessary investigations.

  11. The kinetics of monochloramine decomposition in the presence of bromide. Topical report, April 1978-May 1979

    SciTech Connect

    Trofe, T.W.; Johnson, J.D.; Inman, G.W. Jr.

    1980-03-01

    Monochloramine, a major product formed by chlorine added to natural waters, is a problem because of its persistence and fish toxicity. One major route for its decomposition is through its reaction with bromide. The reaction was found to obey a rate law. The principal reaction product is postulated to be a mixed haloamine, NHBrCl, not previously identified. The electric power industry has traditionally used chlorine as an effective biocide in controlling the growth of microbial slimes and biofoulers throughout power plant cooling water systems.

  12. Cetyltrimethyl ammonium bromide-Mg/Al hydrotalcite for removal phenol in water

    NASA Astrophysics Data System (ADS)

    Kurniawati, Puji; Wiyantoko, Bayu; Purbaningtias, Tri Esti; Muzdalifah

    2017-03-01

    Hydrotalcite materials was synthesized by using Cetyltrimethyl Ammonium Bromide (CTAB) and Mg/Al layered double hydroxide with ratio molar 3:1. Synthesis of CTAB-Mg/Al hydrotalcite was carried out using ex situ co-precipitation method at pH 10±0.5. Removal of phenol was optimum at medium pH 6 and it had optimum contact time in 300 min. It followed pseudo second order with adsorption rate constant was 1.15.10-4 mM-1.min-1. The maximum adsorption capacities obtained from the Langmuir model was 35.71 mg.g-1 at room temperature.

  13. Copper bromide vapour laser with an output pulse duration of up to 320 ns

    SciTech Connect

    Gubarev, F A; Fedorov, K V; Evtushenko, G S; Fedorov, V F; Shiyanov, D V

    2016-01-31

    We report the development of a copper bromide vapour laser with an output pulse duration of up to 320 ns. To lengthen the pulse, the discharge current was limited using a compound switch comprising a pulsed hydrogen thyratron and a tacitron. This technique permits limiting the excitation of the working levels at the initial stage of the discharge development to lengthen the inversion lifetime. The longest duration of a laser pulse was reached in tubes 25 and 50 mm in diameter for a pulse repetition rate of 2 – 4 kHz. (lasers and laser beams)

  14. Total lattice potential energy of sodium bromide dihydrate NaBr · 2H 2O

    NASA Astrophysics Data System (ADS)

    Herzig, P.; Jenkins, H. D. B.; Pritchett, M. S. F.

    1984-08-01

    In addition to presenting comparative calculations by two approaches for the total lattice potential energy of sodium bromide dihydrate, NaBr · 2H 2O, found to take the value 803.9 kJ mol -1, we investigate the influence of the size and nature of the basis set used to generate multipole moments in a Hartee-Fock calculation which are in turn used to calculate the Madelung constant. The requirement is one of critical size of the basis set and once this is reached the electrostatic energy will be reliable.

  15. Formation of bromo-substituted triclosan during chlorination by chlorine in the presence of trace levels of bromide.

    PubMed

    Inaba, Kazuho; Doi, Taeko; Isobe, Noriki; Yamamoto, Takashi

    2006-08-01

    The side reactions of triclosan (2,4,4'-trichloro-2'-hydroxydiphenyl ether, TC) and chlorine in the presence of sodium chloride were investigated. In the absence of sodium chloride, three chloro-derivatives of TC, 2',3,4,4'-tetrachloro-2-hydroxydiphenyl ether (3-Cl-TC), 2',4,4',5-tetrachloro-2-hydroxydiphenyl ether (5-Cl-TC), and 2',3,4,4',5-pentachloro-2-hydroxydiphenyl ether (3,5-Cl(2)-TC) were formed, whereas in the presence of sodium chloride, 3-bromo-2',4,4'-trichloro-2-hydroxydiphenyl ether (3-Br-TC), 5-bromo-2',4,4'-trichloro-2-hydroxydiphenyl ether (5-Br-TC), (3 or 5)-bromo-2',4,4',(5 or 3)-chloro-2-hydroxydiphenyl ether ((3,5)-(BrCl)-TC), and 3,5-dibromo-2',4,4'-trichloro-2-hydroxydiphenyl ether (3,5-Br(2)-TC) were additionally formed. Radiochemical neutron activation analysis indicated that 1g of commercially available sodium chloride contained 73 microg of bromide and the bromide ion was determined to be the source of the side reactions. The rate of decrease of TC due to reaction with chlorine was greatly accelerated by the presence of bromide ion in the system: the rate with only 1 x 10(-5) M bromide ion was three times the rate in the absence of bromide.

  16. p-Bromophenacyl bromide prevents cumene hydroperoxide-induced mitochondrial permeability transition by inhibiting pyridine nucleotide oxidation.

    PubMed

    Zhukova, A; Gogvadze, G; Gogvadze, V

    2004-01-01

    Mitochondrial permeability transition is commonly characterized as a Ca2+ -dependent non-specific increase in inner membrane permeability that results in swelling of mitochondria and their de-energization. In the present study, the effect of different inhibitors of phospholipase A2--p-bromophenacyl bromide, dibucaine, and aristolochic acid--on hydroperoxide-induced permeability transitions in rat liver mitochondria was tested. p-Bromophenacyl bromide completely prevented the hydroperoxide-induced mitochondrial permeability transition while the effects of dibucaine or aristolochic acid were negligible. Organic hydroperoxides added to mitochondria undergo reduction to corresponding alcohols by mitochondrial glutathione peroxidase. This reduction occurs at the expense of GSH which, in turn, can be reduced by glutathione reductase via oxidation of mitochondrial pyridine nucleotides. The latter is considered a prerequisite step for mitochondrial permeability transition. Among all the inhibitors tested, only p-bromophenacyl bromide completely prevented hydroperoxide-induced oxidation of mitochondrial pyridine nucleotides. Interestingly, p-bromophenacyl bromide had no affect on mitochondrial glutathione peroxidase, but reacted with mitochondrial glutathione that prevented pyridine nucleotides from being oxidized. Our data suggest that p-bromophenacyl bromide prevents hydroperoxide-induced deterioration of mitochondria via interaction with glutathione rather than through inhibition of phospholipase A2.

  17. Estimating Potential Increased Bladder Cancer Risk Due to Increased Bromide Concentrations in Sources of Disinfected Drinking Waters.

    PubMed

    Regli, Stig; Chen, Jimmy; Messner, Michael; Elovitz, Michael S; Letkiewicz, Frank J; Pegram, Rex A; Pepping, T J; Richardson, Susan D; Wright, J Michael

    2015-11-17

    Public water systems are increasingly facing higher bromide levels in their source waters from anthropogenic contamination through coal-fired power plants, conventional oil and gas extraction, textile mills, and hydraulic fracturing. Climate change is likely to exacerbate this in coming years. We estimate bladder cancer risk from potential increased bromide levels in source waters of disinfecting public drinking water systems in the United States. Bladder cancer is the health end point used by the United States Environmental Protection Agency (EPA) in its benefits analysis for regulating disinfection byproducts in drinking water. We use estimated increases in the mass of the four regulated trihalomethanes (THM4) concentrations (due to increased bromide incorporation) as the surrogate disinfection byproduct (DBP) occurrence metric for informing potential bladder cancer risk. We estimate potential increased excess lifetime bladder cancer risk as a function of increased source water bromide levels. Results based on data from 201 drinking water treatment plants indicate that a bromide increase of 50 μg/L could result in a potential increase of between 10(-3) and 10(-4) excess lifetime bladder cancer risk in populations served by roughly 90% of these plants.

  18. Preliminary extraction of tannins by 1-butyl-3-methylimidazole bromide and its subsequent removal from Galla chinensis extract using macroporous resins.

    PubMed

    Lu, Chunxia; Luo, Xiaoling; Lu, Liliang; Li, Hongmin; Chen, Xia; Ji, Yong

    2013-03-01

    In recent years, ionic liquids have become increasingly attractive as 'green solvents' used in the extraction of bioactive compounds from natural plant. However, the separation of ionic liquid from the target compounds was difficult, due to their low vapour pressure and high stabilities. In our study, ionic liquid-based ultrasonic and microwave-assisted extraction was used to obtain the crude tannins, then the macroporous resin adsorption technology was further employed to purify the tannins and remove the ionic liquid from crude extract. The results showed that XDA-6 had higher separation efficiency than other tested resins, and the equilibrium experimental data were well fitted to Langmuir isotherms. Dynamic adsorption and desorption were performed on XDA-6 packed in glass columns to optimise the separation process. The optimum conditions as follows: the ratio of column height to diameter bed was 1:8, flow rate 1 BV/h (bed volume per hour), 85% ethanol was used as eluant while the elution volume was 2 BV. Under the optimised conditions, the adsorption and desoption rate of tannins in XDA-6 were 94.81 and 91.63%, respectively. The content of tannins was increased from 70.24% in Galla chinensis extract to 85.12% with a recovery of 99.06%. The result of ultra-performance liquid chromatography (UPLC)-MS/MS analysis showed that [bmim]Br could be removed from extract.

  19. Model prediction uncertainty of bromide and pesticides transport in laboratory column

    NASA Astrophysics Data System (ADS)

    Dusek, Jaromir; Dohnal, Michal; Snehota, Michal; Sobotkova, Martina; Ray, Chittaranjan; Vogel, Tomas

    2016-04-01

    Knowledge of transport parameters of reactive solutes such as pesticides is a prerequisite for reliable predictions of their fate and transport in soil porous systems. Water flow and transport of bromide tracer and five pesticides (atrazine, imazaquin, sulfometuron methyl, S-metolachlor, and imidacloprid) through an undisturbed soil column of tropical Oxisol were analyzed using a one-dimensional numerical model. Laboratory column leaching experiment with three flow interruptions was conducted. The applied numerical model is based on Richards' equation for solving water flow and the advection-dispersion equation for solving solute transport. A global optimization method was used to evaluate the model's sensitivity to transport parameters and the uncertainty of model predictions. Within the Monte Carlo modeling framework, multiple forward simulations searching through the parametric space, were executed to describe the observed breakthrough curves. All pesticides were found to be relatively mobile. Experimental data indicated significant non-conservative behavior of bromide tracer. All pesticides, with the exception of imidacloprid, were found less persistent. Three of the five pesticides (atrazine, sulfometuron methyl, and S-metolachlor) were better described by the linear kinetic sorption model, while the breakthrough curves of imazaquin and imidacloprid were more appropriately approximated using nonlinear instantaneous sorption. Sensitivity analysis suggested that the model is most sensitive to sorption distribution coefficient. The prediction limits contained most of the measured points of the experimental breakthrough curves, indicating adequate model concept and model structure for the description of transport processes in the soil column under study.

  20. Exchange equilibria between bicarbonate, carbonate, chloride and bromide on dowex 1 x 8.

    PubMed

    Lundström, U; Olin, A

    1984-07-01

    The exchange reaction 2R(+)HCO(3)(2-) + CO(3)(2-) right harpoon over left harpoon R(2)(+) CO(3)(2-) + 2HCO(3)(2-) has been studied on Dowex 1 x 8 in the presence of bicarbonate solution in equilibrium with atmospheric carbon dioxide (open system). The experiments showed, as theory predicts, that the composition of the resin phase is independent of the concentration of the bicarbonate solution. The mole fraction of carbonate at equilibrium is about 0.4 and the equilibrium constant is 0.15M at 20 degrees . With this value of the constant, the composition of the ion-exchanger for various bicarbonate concentrations has been calculated for a closed system. At [HCO(3)(-)] < 0.01M a substantial part of the resin is in the carbonate form, whereas for [HCO(3)(-)] 0.05M the resin is present almost exclusively in bicarbonate form. The exchange constants of bromide at trace level have been determined for the bicarbonate and mixed carbonate forms of the ion-exchanger. The exchange constant K(Cl)(HCO(3)) has been determined over the whole composition range and the results can be represented by K(Cl)(HCO(3))= 0.428 -0.063x(Cl) -0.115x(Cl)(2), where X(Cl) is the mole fraction of chloride in the resin. The constants are used to discuss the conditions for the Chromatographie enrichment of bromide from fresh water.

  1. Tailoring acidity of HZSM-5 nanoparticles for methyl bromide dehydrobromination by Al and Mg incorporation

    PubMed Central

    2014-01-01

    Three kinds of HZSM-5 nanoparticles with different acidity were tailored by impregnating MgO or varying Si/Al ratios. Both the textural and acidic properties of the as-prepared nanoparticles were characterized by nitrogen adsorption-desorption measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM), ammonia temperature-programmed desorption (NH3-TPD) and Fourier transform infrared spectroscopy (FTIR or Py-FTIR). It was found that the intensity of Lewis acid sites with weak strength was enhanced by impregnating MgO or reducing Al concentration, and such an enhancement could be explained by the formation of Mg(OH)+ or charge unbalance of the MgO framework on the surface of HZSM-5 support. The effect of HZSM-5 nanoparticles' acidity on methyl bromide dehydrobromination as catalyst was evaluated. As the results, MgHZ-360 catalyst with the highest concentration of Lewis acid sites showed excellent stability, which maintained methyl bromide conversion of up 97% in a period of 400 h on stream. Coke characterization by BET measurements and TGA/DTA and GC/MS analysis revealed that polymethylated naphthalenes species were formed outside the channels of the catalyst with higher acid intensity and higher Brønsted acid concentration during the initial period of reaction, while graphitic carbon formed in the channels of catalyst with lower acid intensity and higher Lewis acid concentration during the stable stage. PMID:25328502

  2. Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells.

    PubMed

    Kulbak, Michael; Gupta, Satyajit; Kedem, Nir; Levine, Igal; Bendikov, Tatyana; Hodes, Gary; Cahen, David

    2016-01-07

    Direct comparison between perovskite-structured hybrid organic-inorganic methylammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3. In order to compare device properties, we fabricated solar cells, with similarly synthesized MAPbBr3 or CsPbBr3, over mesoporous titania scaffolds. Both cell types demonstrated comparable photovoltaic performances under AM1.5 illumination, reaching power conversion efficiencies of ∼6% with a poly aryl amine-based derivative as hole transport material. Further analysis shows that Cs-based devices are as efficient as, and more stable than methylammonium-based ones, after aging (storing the cells for 2 weeks in a dry (relative humidity 15-20%) air atmosphere in the dark) for 2 weeks, under constant illumination (at maximum power), and under electron beam irradiation.

  3. Iodide, bromide, and ammonium in hydraulic fracturing and oil and gas wastewaters: environmental implications.

    PubMed

    Harkness, Jennifer S; Dwyer, Gary S; Warner, Nathaniel R; Parker, Kimberly M; Mitch, William A; Vengosh, Avner

    2015-02-03

    The expansion of unconventional shale gas and hydraulic fracturing has increased the volume of the oil and gas wastewater (OGW) generated in the U.S. Here we demonstrate that OGW from Marcellus and Fayetteville hydraulic fracturing flowback fluids and Appalachian conventional produced waters is characterized by high chloride, bromide, iodide (up to 56 mg/L), and ammonium (up to 420 mg/L). Br/Cl ratios were consistent for all Appalachian brines, which reflect an origin from a common parent brine, while the I/Cl and NH4/Cl ratios varied among brines from different geological formations, reflecting geogenic processes. There were no differences in halides and ammonium concentrations between OGW originating from hydraulic fracturing and conventional oil and gas operations. Analysis of discharged effluents from three brine treatment sites in Pennsylvania and a spill site in West Virginia show elevated levels of halides (iodide up to 28 mg/L) and ammonium (12 to 106 mg/L) that mimic the composition of OGW and mix conservatively in downstream surface waters. Bromide, iodide, and ammonium in surface waters can impact stream ecosystems and promote the formation of toxic brominated-, iodinated-, and nitrogen disinfection byproducts during chlorination at downstream drinking water treatment plants. Our findings indicate that discharge and accidental spills of OGW to waterways pose risks to both human health and the environment.

  4. Bromide transport in different soils under no till and conventional tillage

    NASA Astrophysics Data System (ADS)

    Okada, Elena; Costa, José Luis; Bedmar, Francisco

    2013-04-01

    Prediction and description of water and solute movement within different soil tillage systems is essential when investigating pesticide contamination of soils and groundwater resources. Tillage systems can modify the chemical and biological properties of soil, and furthermore it can alter the pore system and structure. Conservation tillage can accelerate leaching of non reactive solutes and pesticides. Alternatively, solute transport is reduced in conventional tillage by diminishing functional macropores. Our research focused on the study of bromide transport in undisturbed soil columns from three different soils of Argentina, from the provinces of Córdoba, Buenos Aires, and Paraná, managed under no till (NT) and conventional till (CT). Bromide was used as a tracer solute. Experimental data was fitted using the convection dispersion equation (CDE) with the program CXTFIT 2.0. The parameters pore water velocity (v) and hydrodynamic dispersion (D) where estimated. Both NT and CT soils from the province of Paraná had the highest v compared to the other examined soils. Paraná soil has the highest clay content, which may influence its structure (increasing the amount of macropores) and possibly decreasing lateral mass exchange. Additionally, this soil had a higher v under NT practices than CT, while no significant difference between NT and CT were found in soils from Córdoba and Buenos Aires. Dispersion was relatively high in all soils, particularly for Paraná soil under NT. Dispersion was considerably much higher with NT compared to CT columns of the same soil.

  5. Moving away from methyl bromide: political economy of pesticide transition for California strawberries since 2004.

    PubMed

    Mayfield, Erin N; Norman, Catherine Shelley

    2012-09-15

    We examine the progress of the phaseout of the use of the pesticide methyl bromide in the production of California field strawberries. This phaseout is required under the Montreal Protocol and has been contentious in this sector, which receives exemptions from the schedule initially agreed under the treaty, and in international negotiations over the future of the Protocol. We examine the various ex-ante predictions of the impacts on growers, consumers and trade patterns in light of several years of declining allocations under the Critical Use provisions of the Protocol and the 2010 approval of iodomethane for use in California and subsequent 2012 withdrawal of this alternative from the US market. We find that, contrary to ex-ante industry claims, the years of declining methyl bromide use have been years of rising yields, acreage, exports, revenues and market share for California growers, even when faced with a global recession and increased imports from Mexican growers who retain the right to use the chemical under the Protocol. This has implications for the Protocol as a whole and for the remainder of the US phaseout of this chemical in particular.

  6. Functional consequences of ethidium bromide demyelination of the mouse ventral spinal cord

    PubMed Central

    Kuypers, Nicholas J.; James, Kurtis T.; Enzmann, Gaby U.; Magnuson, David S.K.; Whittemore, Scott R.

    2013-01-01

    Ethidium bromide (EB) has been extensively used in the rat as a model of spinal cord demyelination. However, this lesion has not been addressed in the adult mouse, a model with unlimited genetic potential. Here we characterize behavioral function, inflammation, myelin status and axonal viability following bilateral injection of 0.20 mg/mL ethidium bromide or saline into the ventral white matter (VWM) of female C57Bl/6 mice. EB-induced VWM demyelination significantly reduced spared VWM and Basso Mouse Scale (BMS) scores persisting out to 2 months. Chronic hindlimb dysfunction was accompanied by a persistent inflammatory response (demonstrated by CD45+ immunofluorescence) and axonal loss (demonstrated by NF-M immunofluorescence and electron microscopy; EM). These cellular responses differ from the rat where inflammation resolves by 3–4 weeks and axon loss is minimal following EB demyelination. As these data suggest that EB-injection in the mouse spinal cord is a non-remyelinating lesion, we sought to ask whether wheel running could promote recovery by enhancing plasticity of local lumbar circuitry independent of remyelination. This did not occur as BMS and Treadscan® assessment revealed no significant effect of wheel running on recovery. However, this study defines the importance of descending ventral motor pathways to locomotor function in the mouse as VWM loss results in a chronic hindlimb deficit. PMID:23466931

  7. Natural Oxidation of Bromide to Bromine in Evaporated Dead Sea Brines

    NASA Astrophysics Data System (ADS)

    Gavrieli, Ittai; Golan, Rotem; Lazar, Boaz; Baer, Gidi; Zakon, Yevgeni; Ganor, Jiwchar

    2016-04-01

    Highly evaporated Dead Sea brines are found in isolated sinkholes along the Dead Sea. Many of these brines reach densities of over 1.3 kg/L and pH<5 and are the product of evaporation of Dead Sea brine that drain into the sinkholes. The low pH and the reddish to brownish hue of these brines were an enigma until recently. Despite the rather high total alkalinity (TA) of the Dead Sea (3.826 mmol/kg) the pH of the Dead Sea brine is known to be slightly acidic with a value of ~6.3. In comparison, seawater with the same alkalinity would have a pH value well above 8.3, meaning that H+ activity is 100 fold lower than that of Dead Sea brine. In the present work we assess the apparent dissociation constant value of boric acid (K`B) for the Dead Sea brine and use it to explain the brine's low pH value. We then show that pH decreases further as the brine evaporates and salinity increases. Finally we explain the reddish hue of the hypersaline brines in the sinkholes as due to the presence of dissolved bromine. The latter is the product of oxidation of dissolved bromide, a process that is enabled by the low pH of the hypersaline brines and their high bromide concentration.

  8. Enhancement of frequency domain indices of heart rate variability by cholinergic stimulation with pyridostigmine bromide.

    PubMed

    Zarei, Ali Asghar; Foroutan, Seyyed Abbas; Foroutan, Seyyed Mohsen; Erfanian Omidvar, Abbas

    2011-01-01

    Pyridostigmine bromide (PB) is a reversible cholinesterase inhibitor. The aim of this study was to determine the effect of orally administration of single dose sustained-released tablet of pyridostigmine bromide (PBSR) on the frequency domain indices of heart rate variability (HRV). Thirty-two healthy young men were participated in this study. They were divided into 2 groups; the pyridostigmine group (n = 22) and the placebo group (n = 10). Electrocardiogram (ECG) was recorded at 10, 30, 60, 90, 120, 150, 180, 210, 240, 300 and 420 min after PBSR administration. At each time, simultaneously, a blood sample was prepared and PB plasma concentration was measured by high-performance liquid chromatography (HPLC) method. Statistical analysis showed that in different indices of HRV, there is a significant increase in low frequency (LF) band at 300 min, but no difference in high frequency band (HF). It also showed significant decreases in normalized high frequency band (Hfnu), normalized low frequency band (Lfnu) and LF/HF ratio at 120, 240 and 300 min after PBSR administration. Maximum plasma concentration of PB was 150 min after the administration. In conclusion, administration of a single dose PBSR can enhance the frequency domains indices of HRV and improvesympathovagal balance.

  9. [Comparative effects of terbutaline sulphate and ipratropium bromide on the respiratory system (author's transl)].

    PubMed

    Villate Navarro, J I; Sobradillo Peña, V; Atxotequi Iaraoligoitia, V; Salaverri Nalda, A; Orive Martínez, C

    1980-04-10

    Bronchodilator action of two pharmacologically different drugs have been compared. Ipratropium bromide (Sch 1000) is a synthetic atropine derivative and terbutaline sulphate is a beta-stimulating agent. Twelve asthmatic patients and eight patients with chronic bronquitis received terbutaline 0.50 mg. and ipratropium 0.04 mg by aerosol inhalation. Both drugs were given at random on a consecutive-day schedule. All patients were clinically stable before treatment (basal FEV/VC less than 60 percent). Total lung capacity (TLC) forced expiratory volume (FEV), SRaw, and V'/V curves before and at 15, 60, 120, and 240 minutes after the produce administration were registered. Presence of side-effects was also checked. An intensive bronchodilator action was observed either after inhalation of ipratropium bromide or terbutaline, but statistical studies showed no significant differences between both drugs in relation to intensity and duration of their actions. Sch 1000 caused similar bronchodilator effects in all cases; a more intense effect in patients with chronic bronchitis could not be noticed. Evaluation of V'/V curve, and especially its relation to a same pulmonary volume, pointed out that both drugs act upon small respiratory airways. Advance side-effects were not present.

  10. Ionic liquid crystalline phases in 3-hexadecylimidazolium bromide and binary mixtures with 1-decanol.

    PubMed

    Li, Cuihua; He, Jinhua; Chen, Jiahui; Liu, Jianhong; Zhang, Qianling; Yu, Zhenqiang

    2011-07-15

    3-Hexadecylimidazolium bromide was synthesized and characterized showing formation of thermotropic smectic liquid crystals at temperatures above its melting point from 48.5 to 150.9°C. With decreasing temperature, the peak intensities in XRD patterns increase and full widths at half-maximum decrease, suggesting structural order increases with decreasing temperature. Compared with 1,2-dimethyl-3-hexadecyl-imidazolium bromide and hexafluorophosphate, the IL shows a lower melting point and less degree of chain interdigitation. The main reason is due to a more symmetrical structure and denser assembly of the IL molecules, which results in more steric resistance for the alkyl chain to interdigitate. The self-assembly behavior of the hydrophobic IL in an organic solvent was investigated showing SmA(2) lyotropic liquid crystalline phases. The first-order scattering peak shifts to lower q values with increasing IL content, which is opposite to the shift directions of the binary mixtures of the soluble imidazolium IL and water, indicating a different packing behavior of the hydrophobic IL in 1-decanol.

  11. Illness associated with exposure to methyl bromide-fumigated produce--California, 2010.

    PubMed

    2011-07-15

    Methyl bromide (MeBr) is a toxic gas used to fumigate agricultural fields and some produce. The U.S. Department of Agriculture (USDA) requires MeBr fumigation of grapes imported from Chile to prevent invasion by the Chilean false red mite, Brevipalpus chilensis. In 2010, two workers were exposed intermittently to MeBr over several months as part of their job inspecting produce at a cold-storage facility in Carson, California. Both workers had disabling neurologic symptoms (e.g., ataxia, memory difficulties, and dizziness) and elevated serum bromide concentrations. An environmental investigation revealed the potential for MeBr to accumulate in enclosed areas during the transportation and storage of fumigated grapes. Some MeBr air concentrations measured at a single point in time exceeded current 8-hour exposure limits, suggesting that exposure in confined areas could result in poisoning. Possible measures for facilities managers to consider to reduce postfumigation MeBr exposures include 1) increased aeration time, 2) reduction of packaging that might absorb MeBr or limit aeration, and 3) changes in the stacking of pallets to improve air flow. Facilities should monitor air MeBr levels if they store MeBr-fumigated commodities in enclosed spaces entered by workers. Clinicians should consider occupational and environmental exposures in their differential diagnosis, and workers who might become exposed to fumigants should be informed of the health hazards related to these pesticides.

  12. Mild copper-catalyzed vinylation reactions of azoles and phenols with vinyl bromides.

    PubMed

    Taillefer, Marc; Ouali, Armelle; Renard, Brice; Spindler, Jean-Francis

    2006-07-05

    An efficient and straightforward copper-catalyzed method allowing vinylation of N- or O-nucleophiles with di- or trisubstituted vinyl bromides is reported. The procedure is applicable to a broad range of substrates since N-vinylation of mono-, di-, and triazoles as well as O-vinylation of phenol derivatives can be performed with catalytic amounts of copper iodide and inexpensive nitrogen ligands 3 or 8. In the case of more hindered vinyl bromides, the use of the original bidentate chelator 8 was shown to be more efficient to promote the coupling reactions than our key tetradentate ligand 3. The corresponding N-(1-alkenyl)azoles and alkenyl aryl ethers are obtained in high yields and selectivities under very mild temperature conditions (35-110 degrees C for N-vinylation reactions and 50-80 degrees C for O-vinylation reactions). Moreover, to our knowledge, this method is the first example of a copper-catalyzed vinylation of various azoles. Finally, this protocol, practical on a laboratory scale and easily adaptable to an industrial scale, is very competitive compared to the existing methods that allow the synthesis of such compounds.

  13. Chemical vapor transport and solid-state exchange synthesis of new copper selenite bromides

    NASA Astrophysics Data System (ADS)

    Charkin, Dmitri O.; Kayukov, Roman A.; Zagidullin, Karim A.; Siidra, Oleg I.

    2017-02-01

    A new dimorphic copper selenite bromide, Cu5(SeO3)4Br2 was obtained via chemical transport reactions. α-Cu5(SeO3)4Br2, monoclinic (1m) and β-Cu5(SeO3)4Br2, triclinic (1a) polymorphs were produced simultaneously upon reaction of amorphous, partially dehydrated copper selenite and copper bromide. 1m is similar to Cu5(SeO3)4Cl2, whereas 1a is distantly related to Ni5(SeO3)4Br2 and Co5(SeO3)4Br2. Attempts to reproduce synthesis of 1a via exchange reaction between Na2SeO3 and CuBr2 resulted in a new Na2[Cu7O2](SeO3)4Br4 (2). Current study demonstrates for the first time, that both chemical vapor and exchange reactions can be employed in preparation of new selenite halides.

  14. Modelling of a Tracer experiment (Bromide) at the lysimeter Wagna/Austria with MIKE-SHE

    NASA Astrophysics Data System (ADS)

    Reszler, Christian; Fank, Johann

    2015-04-01

    Data of a tracer experiment with Bromide at one of the three lysimeters in Wagna/Austria are used to test the unsaturated zone solute transport model in MIKE-SHE. On April 4th, 2005 50 mg/l of Bromide were applied on the lysimeter operated with conventional farming. At this time the lysimeter was covered with bare soil until the start of the cultivation of pumpkin one month later. Concentrations at the lysimeter bottom (180 cm depth) were measured and, after break-through, plant uptake was measured to quantify mass recovery. The model using the Richards-Van Genuchten-Mualem approach is setup by comprehensive data of vegetation and soil hydraulic properties available at the lysimeter. Water movement simulation in the unsaturated zone is tested against measured seepage rates at the lysimeter bottom and soil water contents in different soil depths in a period of five years. A sensitivity study shows that, particularly in the quaternary gravel zone two different parameter sets are necessary to represent the different dynamics of water content and seepage. With both two sets the general dynamics of the tracer experiment are simulated well. However, the early rapid rise of the measured concentrations could not be represented by either parameter set, which indicates a complex pore system consisting of different flow paths in the gravel zone, e.g., a system of matrix flow and macro-pore flow.

  15. Determinants of Long-Term Persistence with Tiotropium Bromide for Chronic Obstructive Pulmonary Disease.

    PubMed

    Tanaka, Kyuto; Kamiishi, Nobufumi; Miyata, Jun; Kabata, Hiroki; Masaki, Katsunori; Ogura-Tomomatsu, Hiromi; Tomomatsu, Katsuyoshi; Suzuki, Yusuke; Fukunaga, Koichi; Sayama, Koichi; Betsuyaku, Tomoko; Asano, Koichiro

    2015-06-01

    Tiotropium bromide, a long-acting anticholinergic agent, improves pulmonary function and quality of life of patients suffering from chronic obstructive pulmonary disease (COPD). We retrospectively examined the factors that determine the long-term persistence with tiotropium bromide. Among 6,301 patients who underwent pulmonary function tests in our pulmonary clinic between 2006 and 2009, 644 met the following criteria: 1) age > 40 years, 2) ≥ 20 pack-years smoking history, and 3) forced expiratory volume in 1 sec / forced vital capacity ratio < 0.7. The clinical information, including the prescription of tiotropium, was obtained from the patients' records. Tiotropium was administered to 255 patients (40%), of whom 48 (19%) discontinued treatment within 1 year, and 65 (25%) discontinued treatment within the median observation period of 32 months. The drug was discontinued because of ineffectiveness in 35 patients (73%), and because of adverse drug effects in 13 patients (27%). Young age, current smoking, absence of respiratory symptoms alleviation, and less severe disease characterized by a) mild airflow limitation, b) mild to moderate emphysema, or c) no exacerbation of COPD during the 1(st) year of treatment were predictors of drug discontinuation.

  16. Inhibition of multi-species oral biofilm by bromide doped bioactive glass.

    PubMed

    Galarraga-Vinueza, M E; Passoni, B; Benfatti, C A M; Mesquita-Guimarães, J; Henriques, B; Magini, R S; Fredel, M C; Meerbeek, B V; Teughels, W; Souza, J C M

    2017-03-06

    Bioactive glass is an attractive biomaterial that has shown excellent osteogenic and angiogenic effects for oral bone repairing procedures. However, anti-biofilm potential related to such biomaterial has not been completely validated, mainly against multi-species biofilms involved in early tissue infections. The aim of the present study was to evaluate the anti-biofilm effect of 58S bioactive glass embedding calcium bromide compounds at different concentrations. Bioactive glass containing 0, 5, or 10wt% CaBr2 was synthesized by alkali sol-gel method and then characterized by physco-chemical and scanning electron microscopy (SEM). Then, samples were tested by microbiological assays using optical density, real time q-PCR, and SEM. Bioactive glass particles showed accurate chemical composition and an angular shape with a bimodal size distribution ranging from 0.6 to 110 µm. The mean particle size was around 29 µm. A significant anti-biofilm effect was recorded for 5wt% CaBr2 -doped bioactive glass against S. mitis, V. parvula, P. gingivais, S. gordoni, A. viscosus, F, nucleatum, P. gingivais. F. nucleatum and P. gingivalis. Such species are involved in the biofilm structure related to infections on hard and soft tissues in the oral cavity. The incorporation of calcium bromide into bioactive glass can be a strategy to enhance the anti-biofilm potential of bioactive glasses for bone healing and infection treatment. This article is protected by copyright. All rights reserved.

  17. One- and two-dimensional polymers from proline and calcium bromide.

    PubMed

    Lamberts, Kevin; Şerb, Mihaela-Diana; Englert, Ulli

    2015-04-01

    Reactions of calcium bromide with enantiopure and racemic proline in aqueous solution lead to two solids in which the zwitterionic amino acid acts as a bridging ligand between neighbouring cations. Depending on the chirality of the amino acid, topologically very different products are obtained. With racemic proline, bromide acts as a simple uncoordinated counter-anion for the cationic heterochiral chains in catena-poly[[aquacalcium(II)]-μ-aqua-μ3-DL-proline-μ2-DL-proline], {[Ca(C5H9NO2)2(H2O)2]Br2}n. In agreement with chemical intuition, only carboxylate and aqua O atoms coordinate the alkaline earth cation in a low-symmetry arrangement. In contrast, L-proline affords the two-dimensional network poly[dibromidobis(μ2-L-proline)calcium(II)], [CaBr2(C5H9NO2)2]n, with an unexpected CaBr2 unit in a more regular coordination sphere.

  18. Carbene-catalysed reductive coupling of nitrobenzyl bromides and activated ketones or imines via single-electron-transfer process

    PubMed Central

    Li, Bao-Sheng; Wang, Yuhuang; Proctor, Rupert S. J.; Zhang, Yuexia; Webster, Richard D.; Yang, Song; Song, Baoan; Chi, Yonggui Robin

    2016-01-01

    Benzyl bromides and related molecules are among the most common substrates in organic synthesis. They are typically used as electrophiles in nucleophilic substitution reactions. These molecules can also be activated via single-electron-transfer (SET) process for radical reactions. Representative recent progress includes α-carbon benzylation of ketones and aldehydes via photoredox catalysis. Here we disclose the generation of (nitro)benzyl radicals via N-heterocyclic carbene (NHC) catalysis under reductive conditions. The radical intermediates generated via NHC catalysis undergo formal 1,2-addition with ketones to eventually afford tertiary alcohol products. The overall process constitutes a formal polarity-inversion of benzyl bromide, allowing a direct coupling of two initially electrophilic carbons. Our study provides a new carbene-catalysed reaction mode that should enable unconventional transformation of (nitro)benzyl bromides under mild organocatalytic conditions. PMID:27671606

  19. Combination of ozonation and photocatalysis for purification of aqueous effluents containing formic acid as probe pollutant and bromide ion.

    PubMed

    Parrino, F; Camera-Roda, G; Loddo, V; Palmisano, G; Augugliaro, V

    2014-03-01

    The treatment by advanced oxidation processes (AOPs) of waters contaminated by organic pollutants and containing also innocuous bromide ions may generate bromate ions as a co-product. In the present work heterogeneous photocatalysis and ozonation have individually been applied and in combination (integrated process) to degrade the organic compounds in water containing also bromide anions. The results show that: i) the sole photocatalysis does not produce bromate ions and in the case of its presence, it is able to reduce bromate to innocuous bromide ions; ii) the integration of photocatalysis and ozonation synergistically enhances the oxidation capabilities; and iii) in the integrated process bromate ions are not produced as long as some oxidizable organics are present.

  20. Off-site air monitoring following methyl bromide chamber and building fumigations and evaluation of the ISCST air dispersion model

    SciTech Connect

    Barry, T.; Swgawa, R.; Wofford, P.

    1995-12-31

    The Department of Pesticide Regulation`s preliminary risk characterization of methyl bromide indicated an inadequate margin of safety for several exposure scenarios. Characterization of the air concentrations associated with common methyl bromide use patterns was necessary to determine specific scenarios that result in an unacceptable margin of safety. Field monitoring data were used in conjunction with the Industrial Source Complex, Short Tenn (ISCST) air dispersion model to characterize air concentrations associated with various types of methyl bromide applications. Chamber and building fumigations were monitored and modelled. For each fumigation the emission rates, chamber or building specifications and on-site meteorological data were input into the ISCST model. The model predicted concentrations were compared to measured air concentrations. The concentrations predicted by the ISCST model reflect both the pattern and magnitude of the measured concentrations. Required buffer zones were calculated using the ISCST output.

  1. Carbene-catalysed reductive coupling of nitrobenzyl bromides and activated ketones or imines via single-electron-transfer process

    NASA Astrophysics Data System (ADS)

    Li, Bao-Sheng; Wang, Yuhuang; Proctor, Rupert S. J.; Zhang, Yuexia; Webster, Richard D.; Yang, Song; Song, Baoan; Chi, Yonggui Robin

    2016-09-01

    Benzyl bromides and related molecules are among the most common substrates in organic synthesis. They are typically used as electrophiles in nucleophilic substitution reactions. These molecules can also be activated via single-electron-transfer (SET) process for radical reactions. Representative recent progress includes α-carbon benzylation of ketones and aldehydes via photoredox catalysis. Here we disclose the generation of (nitro)benzyl radicals via N-heterocyclic carbene (NHC) catalysis under reductive conditions. The radical intermediates generated via NHC catalysis undergo formal 1,2-addition with ketones to eventually afford tertiary alcohol products. The overall process constitutes a formal polarity-inversion of benzyl bromide, allowing a direct coupling of two initially electrophilic carbons. Our study provides a new carbene-catalysed reaction mode that should enable unconventional transformation of (nitro)benzyl bromides under mild organocatalytic conditions.

  2. [Effects of bromide and ferric ions on formation of tri-halomethanes during disinfection of drinking water by chlorine].

    PubMed

    Zhu, Zhi-Liang; Wang, Jing; Ge, Yuan-Xin; Ma, Hong-Mei; Zhao, Jian-Fu

    2007-06-01

    Effects of bromide and ferric ions on the formation and distribution of tri-halomethanes (THMs) have been investigated. As disinfection by-product (DBP) model precursors of natural water, humic acid solutions were used and a series of experiments were conducted. The results showed that bromide in this reaction system not only contributed to the increase of brominated species, but also the total tri-halomethanes. When the concentration of Br(-) was 1.0 mg/L, the total amount of produced THMs reached to 270% of that without bromide ions. In the presence of bromide, ferric ions decreased the production of THMs at pH 6, but increased the production of THMs at pH 8, especially for the amount of tri-bromomethanes. When the concentration of Fe3+ was 5 mg/L, the amount of produced tri-bromomethanes had an increment of 54% (from 51.7 microg/L to 79.4 microg/L), and the total amount of THMs increased from 113.49 microg/L to 162.09 microg/L. Bromide ions had a significant effect on carcinogenicity risk in disinfection of drinking water by chlorine, and the co-existence of ferric ion and bromide in alkalescent environment can result in the biggest challenge on carcinogenicity risk. Under the condition of 0.2 mg/L Br(-), 5 mg/L Fe3+ and pH 6, the carcinogenicity risk increased 2.5 times than that without Br(-) and Fe3+, and much higher increment of 5.1 times appeared when pH was 8.

  3. Irradiation as a disinfestation method — update on methyl bromide phase out, regulatory action and emerging opportunities

    NASA Astrophysics Data System (ADS)

    Marcotte, Michelle

    1998-06-01

    Methyl bromide (MeBr), is the most widely used agricultural fumigant in the world for the control of pests and plant diseases. It is used to control pests and diseases in food, agricultural and forestry commodities after harvest, before or during storage or transportation and/or at time of import to control quarantine or storage pests. Knowing MeBr will be phased out has spurred a search for alternative treatments and products, and has placed pressure on regulatory authorities to approve alternatives. Some of methyl bromide use could be replaced with irradiation. Methyl bromide is also used for soil and structural fumigation, and although there is some use of irradiation for packaged soil or greenhouse products, in general, these uses can not be replaced by irradiation. Some radiation processing facilities have either seen increased business to disinfest commodities, or have experienced more inquiries for service. There are many other processes and products competing for this market and irradiation will not win its share of the business without an improved regulatory picture, improved marketing to methyl bromide users and improved information to answer questions from commodity sectors. The United Nations Environment Program — Methyl Bromide Technical Options Committee (MBTOC) provides a venue for the publication or information about the use and availability of irradiation as an alternative to methyl bromide. It provides the technical base to the Montreal Protocol contributing to the setting of phase out dates; this committee is actively researching and assessing all alternatives and needs information about irradiation. The author is a member of the MBTOC committee.

  4. Hydrogen bonding. Part 21. Infrared spectral study of the high-temperature phases of choline bromide and choline iodide

    NASA Astrophysics Data System (ADS)

    Harmon, Kenneth M.; Avci, Günself F.; Thiel, Anne C.

    1986-06-01

    Infrared spectra have been obtained for the high-temperature phase of choline bromide, and for the three high-temperature phases of choline iodide, and the results correlated with our previous studies on choline chloride. All eight known phases of the choline halides contain OH⋯X hydrogen bonds. β-Choline chloride, β-choline bromide, and δ- choline iodide appear to have identical environments; thus, when secondary interionic interactions are overcome by elevated temperatures, a face-centered cubic crystal habit is preferred for all three halides.

  5. Observations of Halogen Concentrations in Polar Snow near Barrow, Alaska Indicate that Bromide is Highly Affected by Atmospheric Chemistry

    NASA Astrophysics Data System (ADS)

    Alvarez-Aviles, L.; Simpson, W. R.; Douglas, T. A.; Sturm, M.; Domine, F.

    2004-12-01

    The polar atmosphere shows unique and important atmospheric chemistry in the related phenomena of ozone depletion and mercury deposition. During these ozone depletion episodes (ODEs), ozone is depleted from background levels to nearly zero. At the same time, gas-phase mercury is oxidized to reactive gaseous mercury that subsequently deposits potentially providing a source of toxic mercury to the Arctic ecosystem. These ODEs are clearly related to reactive halogen chemistry and particularly gaseous bromine species (Br and BrO). The origin of these reactive halogen species is most likely sea salts that are liberated by poorly understood chemistry, possibly assisted by frost flower formation. These reactive halogen species eventually react to form the stable halogen anions (e.g. Bromide, Br-), that is subsequently deposited to the snowpack. Therefore, we undertook a study of halogens in the snow in the vicinity of Barrow, Alaska. Snow samples were collected in three phases along a 100 km transect from shore to inland in 2004. Phase I (29 Feb - 5 Mar), phase II (31 Mar - 13 Apr), and phase III (7 May - 11 May) snow samples were analyzed for ions to investigate snow-air interactions. Anions (F-, Cl-, Br-, NO3-, SO42-) were analyzed with ion chromatography, and cations (Ca2+, Mg2+ and Na+) with flame atomic absorption spectroscopy. Frost flower samples were approximately 4 times more concentrated in ions than sea water, but most ions (except sulfate and to a smaller extent sodium) were not fractionated with respect to sea water. The bromide to chloride ratio in the frost flowers was identical to that of sea water, indicating that possible fractionation of bromide during frost flower formation does not occur. The sulfate to chloride ratio in frost flowers was about half of that in sea water, indicating fractionation probably due to mirabalite (Na2SO4 hydrate) precipitation. In snow samples, the bromide to chloride ratio showed bromide depletion in salty samples (higher

  6. Bromidotetra­kis­(2-ethyl-1H-imidazole-κN 3)copper(II) bromide

    PubMed Central

    Godlewska, Sylwia; Kelm, Harald; Krüger, Hans-Jörg; Dołęga, Anna

    2012-01-01

    The CuII ion in the title mol­ecular salt, [CuBr(C5H8N2)4]Br, is coordinated in a square-pyramidal geometry by four N atoms of imidazole ligands and one bromide anion in the apical position. In the crystal, the ions are linked by N—H⋯Br hydrogen bonds involving both the coordinating and the free bromide species as acceptors. A C—H⋯Br inter­action is also observed. Overall, a three-dimensional network results. PMID:23468738

  7. Influence of chloride on modification of unsaturated phosphatidylcholines by the myeloperoxidase/hydrogen peroxide/bromide system.

    PubMed

    Panasenko, Oleg M; Vakhrusheva, Tatyana; Tretyakov, Vadim; Spalteholz, Holger; Arnhold, Juergen

    2007-01-01

    The leukocyte enzyme myeloperoxidase (MPO) is capable of catalyzing the oxidation of chloride and bromide ions, at physiological concentrations of these substrates, by hydrogen peroxide, generating hypochlorous acid (HOCl) and hypobromous acid (HOBr), respectively. Our previous results showed that the hypohalous acids formed react with double bonds in phosphatidylcholines (PCs) to produce chloro- and bromohydrins. Lysophosphatidylcholine (lyso-PC) is additionally formed in PCs with two or more double bonds. This study was conducted to determine the effect physiological chloride concentration (140 mM) has on the formation of bromohydrins and lyso-PC from unsaturated PC upon treatment with the myeloperoxidase/hydrogen peroxide/bromide (MPO/H2O2/Br-) system using physiological bromide concentrations (20-100 microM). The composition of reaction products was analyzed by matrix-assisted laser desorption and ionization time-of-flight mass spectrometry (MALDI-TOF MS). With monounsaturated PC, we demonstrated that the rate and extent of mono-bromohydrin formation were higher in the samples with 140 mM chloride compared to those with no added chloride. Moreover, mono-bromohydrin came to be the major product and no mono-chlorohydrin was observed already at 60 microM bromide. We attributed these effects to the involvement of HOBr arising from the reaction of MPO-derived HOCl with bromide rather than to the exchange of bromide with chlorine atoms of chlorohydrins or direct formation of HOBr by MPO. The presence of chloride shifted the pH optimum for mono-bromohydrin formation (pH 5.0) toward neutral values, and a significant yield of mono-bromohydrin was detected at physiological pH values (7.0-7.4). For polyunsaturated PC, chloride enhanced also lyso-PC production, the effect being pronounced at bromide concentrations below 40 microM. The results indicate that at physiological levels of chloride and bromide, chloride promotes MPO-mediated formation of bromohydrins and lyso

  8. Spectral and Non Radiative Decay Studies of Lead Di Bromide Single Crystals by Mode Matched Thermal Lens Technique.

    PubMed

    Rejeena, I; Lillibai, B; Thomas, V; Nampoori, V P N; Radhakrishnan, P

    2016-07-01

    In the present paper, the investigations on the non radiative decay mechanism, optical band gap determination from absorption spectroscopic studies and fluorescence emission by photo luminescence techniques using different excitation wavelengths on gel derived lead di bromide single crystals are reported. Non radiative decay of the sample is studied using high sensitive dual beam mode matched thermal lens technique. For the thermal lensing experiment the crystal in solution phase is incorporated with rhodamine 6G dye for enhancing the absorption of the crystal sample. The thermal diffusivity of lead di bromide is determined using the probe beam intensity v/s time measurements.

  9. COPD patient satisfaction with ipratropium bromide/albuterol delivered via Respimat: a randomized, controlled study

    PubMed Central

    Ferguson, Gary T; Ghafouri, Mo; Dai, Luyan; Dunn, Leonard J

    2013-01-01

    Background Ipratropium bromide/albuterol Respimat inhaler (CVT-R) was developed as an environmentally friendly alternative to ipratropium bromide/albuterol metered-dose inhaler (CVT-MDI), which uses a chlorofluorocarbon propellant. Objective The objective of this study was to evaluate patient satisfaction, device usage, and long-term safety of CVT-R compared to CVT-MDI, and to the simultaneous administration of ipratropium bromide hydrofluoroalkane (HFA; I) and albuterol HFA (A) metered-dose inhalers as dual monotherapies (I + A). Design This is a 48-week, open-label, randomized, active-controlled, parallel-group study (n = 470) comparing CVT-R to CVT-MDI and to I + A. Participants Patients were at least 40 years of age, diagnosed with chronic obstructive pulmonary disease (COPD), and current or exsmokers. Interventions Patients were randomized to receive: (1) CVT-R, one inhalation four times daily (QID); or (2) CVT-MDI, two inhalations QID; or (3) I + A two inhalations of each inhaler QID. Main measures Patient Satisfaction and Preference Questionnaire (PASAPQ) performance score (primary endpoint) and adverse events. Key results PASAPQ performance score was significantly higher (CVT-R versus CVT-MDI, 9.6; and CVT-R versus I + A, 6.2; both P < 0.001) when using CVT-R compared to CVT-MDI or I + A at all visits starting from week 3, while CVT-MDI and I + A treatment groups were similar. Time to first COPD exacerbation was slightly longer in the CVT-R group compared to the other treatment groups, although it did not reach statistical significance (CVT-R versus CVT-MDI, P = 0.57; CVT-R versus I + A, P = 0.22). Rates of withdrawal and patient refusal to continue treatment were lower in CVT-R compared with CVT-MDI and I + A groups (CVT-R versus CVT-MDI, P = 0.09; CVT-R versus I + A, P = 0.005). The percentage of patients reporting adverse events and serious adverse events was similar across all three treatment groups. Conclusion CVT-R is an effective, environmentally

  10. Hydrogen bonding Part 53. Correlation of differential scanning calorimetric data with IR and dissociation vapor pressure studies of transitions of hexamethonium chloride and bromide dihydrates and hexamethonium bromide monohydrate

    NASA Astrophysics Data System (ADS)

    Snider, Barbara L.; Harmon, Kenneth M.

    1994-03-01

    Differential scanning calorimetry of hexamethonium chloride dihydrate shows an endothermic transition of 2.70 kcal mol -1 at 36.81°C. This correlates well with the temperatures observed by IR spectra (36°C) and equilibrium dissociation vapor pressure studies (37°C) for the transition between Type I planar cluster and Type II extended linear HOH⋯Cl - hydrogen bonding, and with the value of 2.77 kcal mol -1 for this transition derived by Hess' law treatment of dissociation vapor pressure data. Differential scanning calorimetry of hexamethonium bromide shows a rapid endothermic transition of 2.38 kcal mol -1 at 35.15°C and a very slow endothermic transition of about 12-13 kcal mol -1 centered near 50°C. This latter endotherm corresponds to the transition between Type I and Type II HOH⋯Br - hydrogen bonding observed by IR and vapor pressure studies at 49°C. The nature of the 35.15°C endotherm is not known. Hexamethonium bromide also shows a third endotherm at 142.91°C, which presumably results from melting of hydrate in the sealed DSC cell. Combined analysis of differential scanning calorimetry and dissociation vapor pressure data predicts a value of about -13 kcal mol -1 for an exothermic disproportionation at 52°C of two hexamethonium bromide monohydrate to Type II dihydrate and anhydrous bromide.

  11. The role of adsorption of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide surfactants in wetting of polytetrafluoroethylene and poly(methyl methacrylate) surfaces

    NASA Astrophysics Data System (ADS)

    Harkot, Joanna; Jańczuk, Bronisław

    2009-01-01

    The role of adsorption of dodecylethyldimethylammonium bromide (C 12(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB) at water-air and polytetrafluoroethylene (PTFE)-water and poly(methyl methacrylate) (PMMA)-water interface, in wetting of PTFE and PMMA surface, was established from the measured values of the contact angle ( θ) of aqueous C 12(EDMAB) and BDDAB solutions in PTFE (PMMA)-solution drop-air system, and from the measured values of the surface tension of aqueous C 12(EDMAB) and BDDAB solutions. Adsorption of C 12(EDMAB) and BDDAB at water-air interface was determined earlier from the Gibbs equation. Adsorption at solid-water interface was deduced from the Lucassen-Reynders equation based on the relationship between adhesion tension ( γLV cos θ) and surface tension ( γLV). The slope of the γLV cos θ- γLV curve was found to be constant and equal to -1, and about -0.3 for PTFE and PMMA surface, respectively (in the case of both surfactant studied: C 12(EDMAB) and BDDAB, and in the whole range of surfactants concentration in solution). It means that the amount of the surfactant adsorbed at the PTFE-water interface, ΓSL, was essentially equal to its amount adsorbed at water-air interface, ΓLV. However, ΓSL at the PMMA-water interface was about three times smaller as compared to that at water-air interface. By extrapolating the linear dependence between γLV cos θ- γLV and dependence between cos θ- γLV and cos θ = 1 we determined the value of the critical surface tension of PTFE and PMMA surface wetting, γc. The obtained values of γc for PTFE surface were equal 23.4 and 23.8 mN/m, 23.1 and 23.2 mN/m for C 12(EDMAB) and BDDAB, respectively and they were higher than the surface tension of PTFE (20.24 mN/m). On the other hand, the obtained values of γc for PMMA surface were equal 31.4 and 30.9 mN/m, 31.7 and 31.3 mN/m for C 12(EDMAB) and BDDAB, respectively and they were smaller than the surface tension of PMMA (39.21 mN/m). Using the

  12. Crystal structure of 2-carboxy- N,N,N- trimethylethanaminium bromide monohydrate

    NASA Astrophysics Data System (ADS)

    Chen, Xiao-Ming; Mak, Thomas C. W.

    1991-05-01

    A new betaine derivative, 2-carboxy- N,N,N-trimethylethanaminium bromide monohydrate, (Me 3NCH 2CH 2COOH)Br·H 2O, I, has been synthesized and characterized by X-ray crystallography. Compound I crystallizes in space group Pnma (no. 62), with a=10.452(2), b=6.855(2), c=13.737(2)Å, and Z=4. The structure ( RF=0.047 for 881 observed (⋎ FO⋎&>;6⋎ FO⋎) Mo Kα data) features a hydrogen-bonded (BR -·H 2O) ∞zigzag chain running parallel to the a axis. The quaternary ammonium ions, each attaining Cs molecular symmetry, are laterally attached by donor hydrogen bonds to the exposed water molecules of the zigzag chain. The crystal structure consists of layers each having a zipper-like arrangement of the quaternary ammonium "side-chains".

  13. Recovery of bromine from waste gas-phase hydrogen bromide streams using an electrolytic membrane

    SciTech Connect

    Wauters, C.N; Winnick, J.

    1996-09-01

    An electrochemical cell is used to demonstrate a significant improvement in the recovery of bromine (Br{sub 2}) from waste gas-phase hydrogen bromide (HBr) streams. The continuous process operates at 300 C and utilizes reticulated vitreous carbon gas-diffusion electrodes, a molten (Li{sub 0.575}K{sub 0.133}Cs{sub 0.292})Br electrolyte, and borosilicate glass fiber membrane. HBr is simultaneously electrolytically decomposed and separated into a hydrogen enriched waste stream and pure anhydrous Br{sub 2} product stream. Simulated industrial waste streams containing HBr, nitrogen, water vapor, and organic compounds have been tested. These results include removals of greater than 90% and current densities approaching 1.0 A/cm{sup 2}.

  14. Ultraviolet quantum detection efficiency of potassium bromide as an opaque photocathode applied to microchannel plates

    NASA Technical Reports Server (NTRS)

    Siegmund, Oswald H. W.; Everman, E.; Vallerga, J. V.; Sokolowski, J.; Lampton, M.

    1987-01-01

    The quantum detection efficiency (QDE) of potassium bromide as a photocathode applied directly to the surface of a microchannel plate over the 250-1600 A wavelength range has been measured. The contributions of the photocathode material in the channels and on the interchannel web to the QDE have been determined. Two broad peaks in the QDE centered at about 450 and about 1050 A are apparent, the former with about 50 percent peak QDE and the latter with about 40 percent peak QDE. The photoelectric threshold is observed at about 1600 A, and there is a narrow QDE minimum at about 750 A which correlates with 2X the band gap energy for KBr. The angular variation of the QDE from 0 to 40 deg to the channnel axis has also been examined. The stability of Kbr with time is shown to be good with no significant degradation of QDE at wavelengths below 1216 A over a 15-day period in air.

  15. Micellization of alkyltrimethylammonium bromide surfactants in choline chloride:glycerol deep eutectic solvent.

    PubMed

    Sanchez-Fernandez, Adrian; Arnold, Thomas; Jackson, Andrew J; Fussell, Sian L; Heenan, Richard K; Campbell, Richard A; Edler, Karen J

    2016-12-07

    Deep eutectic solvents have shown the ability to promote the self-assembly of surfactants in solution. However, some differences have been found compared with self-assembly in pure water and other polar organic solvents. The behaviour of alkyltrimethylammonium bromides in choline chloride:glycerol deep eutectic solvent has been studied by means of surface tension, X-ray and neutron reflectivity and small-angle neutron scattering. The surfactants were found to remain surface active and showed comparable critical micelle concentrations to the same surfactants in water. Our scattering studies demonstrate that these surfactants form globular micelles with ellipsoidal shape in solution. The size, shape and aggregation number of the aggregates were found to vary with the chain length of the surfactant. Specific solvent-headgroup interactions were not found in this system, unlike those we have previously postulated for anionic surfactants in choline chloride deep eutectic solvents.

  16. Copper bromide vapor brightness amplifiers with 100 kHz pulse repetition frequency

    NASA Astrophysics Data System (ADS)

    Trigub, M. V.; Evtushenko, G. S.; Torgaev, S. N.; Shiyanov, D. V.; Evtushenko, T. G.

    2016-10-01

    The paper presents a laser monitor with 10 μs time-resolution based on a high-frequency copper bromide vapor brightness amplifier. A sync circuit has been designed for single-pulse imaging. The analysis of amplifying characteristics of the active elements and active optical system (laser monitor) parameters allowed to determine the optimal concentration of HBr at which the images can be obtained with minimum distortions. For the active element operating at high frequencies (more than 50 kHz) as a brightness amplifier, the concentration of HBr must be lower than that needed for obtaining the maximum output power. The limiting brightness temperature of the background radiation which does not affect the image quality is determined. The potential feasibility of using a proposed brightness amplifier for visualizing processes blocked from viewing by the background radiation with the brightness temperature up to 8000 K is demonstrated.

  17. Growth and characterization of Cadmium Thiosemicarbazide Bromide crystals for antibacterial and nonlinear optical applications

    NASA Astrophysics Data System (ADS)

    Thomas Joseph Prakash, J.; Martin Sam Gnanaraj, J.

    2015-01-01

    Semiorganic nonlinear optical crystals of Cadmium Thiosemicarbazide Bromide was grown by slow evaporation solution growth technique. The unit cell parameters were estimated by subjecting the crystals to single crystal X-ray diffraction. The grown crystals were subjected to Powder X-ray diffraction for analyzing the crystalline nature of the sample. FTIR studies reveal the functional groups and the optical characters were analyzed by UV-Vis spectral studies. Mechanical stability of the sample was assessed by Vicker's micro hardness test. The presence of surface dislocations was identified by chemical etching technique. Antibacterial study was carried out against ACDP declared harmful pathogens. SHG efficiency of CTSB crystal was tested using Nd: YAG laser and it was found to be ∼1.8 times that of potassium dihydrogen phosphate.

  18. Growth, photoluminescence, thermal and mechanical behaviour of Ethyltriphenylphosphonium bromide dihydrate crystal

    NASA Astrophysics Data System (ADS)

    Parthasarathy, M.; Gopalakrishnan, R.

    2013-10-01

    Single crystal of Ethyltriphenylphosphonium bromide dihydrate (ETPB) was grown by slow evaporation solution growth technique. The grown crystal was confirmed by single crystal X-ray diffraction. The functional groups and vibrational frequencies were identified using FT-IR and FT-Raman spectral analyses. Optical properties were studied by UV-Visible and photoluminescence spectroscopic techniques to explore its efficacy towards device fabrication. Thermal characteristics of ETPB were studied using the TGA/DTA and DSC response curves. The mechanical behaviour of the grown crystal was studied using Vicker's microhardness tester and the work hardening coefficient was evaluated. The second harmonic generation of the title compound was tested by Kurtz-Perry powder technique.

  19. The matlockite-type praseodymium(III) oxide bromide PrOBr.

    PubMed

    Talmon-Gros, Pia; Schurz, Christian M; Schleid, Thomas

    2011-12-01

    The crystal structure of the praseodymium(III) oxide bromide, PrOBr, can be best described with layers of agglomerated square anti-prisms [PrO(4)Br(4)](9-). These slabs are stacked along the c axis and linked via two different secondary contacts between Pr(3+) and Br(-). The Pr(3+) cations occupy the Wyckoff site 2c with 4mm symmetry and carry four O(2-) anions as well as four primary Br(-) anions, yielding a coordination number of 8. While the Br(-) anions exhibit the same site symmetry as the Pr(3+) cations, the oxide anions are located at the Wyckoff position 2a with site symmetry [Formula: see text]m2 and have four Pr(3+) cations as neighbours, defining a tetra-hedron.

  20. On-line sample preconcentration by sweeping with dodecyltrimethylammonium bromide in capillary zone electrophoresis

    PubMed Central

    Gong, Maojun; Wehmeyer, Kenneth R.; Limbach, Patrick A.; Heineman, William R.

    2008-01-01

    On-line sample preconcentration of oligonucleotides with a new sweeping carrier was developed by using dodecyltrimethylammonium bromide (DTAB) below the critical micelle concentration (CMC). The sweeping results with DTAB below and above the CMC were compared. The use of DTAB below the CMC benefits the preconcentration of the oligonucleotides, while the use of DTAB above the CMC is good for hydrophobic small molecules. The factors affecting the sweeping results were optimized and this method was evaluated by constructing calibration curves for thrombin aptamers. The sweeping scheme produced a 112-fold sensitivity enhancement for the oligonucleotides relative to that run in a running buffer without DTAB. The sweeping method developed here can be a good reinforcement of the preconcentration scheme by sweeping when less-hydrophobic analytes or large negatively-charged molecules need to be preconcentrated. PMID:16808920

  1. Palladium-Catalyzed Cross Coupling of Secondary and Tertiary Alkyl Bromides with a Nitrogen Nucleophile

    PubMed Central

    2016-01-01

    We report a new class of catalytic reaction: the thermal substitution of a secondary and or tertiary alkyl halide with a nitrogen nucleophile. The alkylation of a nitrogen nucleophile with an alkyl halide is a classical method for the construction of C–N bonds, but traditional substitution reactions are challenging to achieve with a secondary and or tertiary alkyl electrophile due to competing elimination reactions. A catalytic process could address this limitation, but thermal, catalytic coupling of alkyl halides with a nitrogen nucleophile and any type of catalytic coupling of an unactivated tertiary alkyl halide with a nitrogen nucleophile are unknown. We report the coupling of unactivated secondary and tertiary alkyl bromides with benzophenone imines to produce protected primary amines in the presence of palladium ligated by the hindered trialkylphosphine Cy2t-BuP. Mechanistic studies indicate that this amination of alkyl halides occurs by a reversible reaction to form a free alkyl radical. PMID:27725963

  2. Evaporation for Lithium Bromide Aqueous Solution in a Falling Film Heater under Reduced Pressures

    NASA Astrophysics Data System (ADS)

    Matsuda, Akira; Ide, Tetsuo; Yukino, Keiji

    Experiments on evaporation for water and lithium bromide (LiBr) aqueous solution were made in a externally heated wetted-wall column under reduced pressures. For water, evaporation rate increased slightly as feed rate decreased. The heat transfer coefficients of falling film agreed with those for filmwise condensation. For LiBr solution, evaporation rate decreased and outlet temperature of LiBr solution increased as feed rate decreased. The equations of continuity, diffusion and energy which assume that only water moves to the surface and LiBr doesn't move through falling film of LiBr solution were solved numerically. Calculated values of evaporation rate and outlet temperature of solution agreed with experimental results. The results of this work were compared with pool boiling data reported previously, and it was shown that falling film heater is superior to pool boiling heater concerning heat transfer.

  3. Interaction between dimethyldioctadecylammonium bromide-modified PLGA microspheres and hyaluronic acid

    NASA Astrophysics Data System (ADS)

    Mulia, Kamarza; Devi, Krisanti, Elsa

    2017-02-01

    In application of intravitreal injection, an extended drug delivery system is desired so that the frequency of injection to treat diabetic retinopathy may be reduced. Poly(lactic-co-glycolic acid) polymer (PLGA) was used to encapsulate a model drug in the form of microspheres. The zeta potential of dimethyldioctadecylammonium bromide (DDAB)-modified PLGA microspheres in water was proportional to the DDAB concentration used in the preparation step, up to +57.8 mV. The scanning electron microscope pictures and the zeta potential data (SEM) confirmed that the surface of the PLGA has been modified by the cationic surfactant and that electrostatic interaction between the positively charged microspheres and the negatively charged vitreous were present.

  4. Bromidotetra-kis-(1H-2-ethyl-5-methyl-imidazole-κN)copper(II) bromide.

    PubMed

    Godlewska, Sylwia; Baranowska, Katarzyna; Socha, Joanna; Dołęga, Anna

    2011-12-01

    The Cu(II) ion in the title compound, [CuBr(C(6)H(10)N(2))(4)]Br, is coordinated in a square-based-pyramidal geometry by the N atoms of four imidazole ligands and a bromide anion in the apical site. Both the Cu(II) and Br(-) atoms lie on a crystallographic fourfold axis. In the crystal, the [CuBr(C(6)H(10)N(2))(4)](+) complex cations are linked to the uncoordinated Br(-) anions (site symmetry [Formula: see text]) by N-H⋯Br hydrogen bonds, generating a three-dimensional network. The ethyl group of the imidazole ligand was modelled as disordered over two orientations with occupancies of 0.620 (8) and 0.380 (8).

  5. Successful treatment of migrating partial seizures in Wolf-Hirschhorn syndrome with bromide.

    PubMed

    Itakura, Ayako; Saito, Yoshiaki; Nishimura, Yoko; Okazaki, Tetsuya; Ohno, Koyo; Sejima, Hitoshi; Yamamoto, Toshiyuki; Maegaki, Yoshihiro

    2016-08-01

    A girl with mild psychomotor developmental delay developed right or left hemiclonic convulsion at 10months of age. One month later, clusters of hemiclonic or bilateral tonic seizures with eyelid twitching emerged, resulting in status epilepticus. Treatment with phenobarbital and potassium bromide completely terminated the seizures within 10days. Ictal electroencephalography revealed a migrating focus of rhythmic 3-4Hz waves from the right temporal to right frontal regions and then to the left frontal regions. Genetic analysis was conducted based on the characteristic facial appearance of the patient, which identified a 2.1-Mb terminal deletion on chromosome 4p. This is the first case of Wolf-Hirschhorn syndrome complicated by epilepsy with migrating partial seizures.

  6. Effect of surfactant additive on pool boiling of concentrated lithium bromide solution

    SciTech Connect

    Wu, W.T.; Yang, Y.M.; Maa, J.R.

    1998-11-01

    The measurements of nucleate pool boiling heat transfer rate and surface tension were made for pure water and 50 wt.% lithium bromide solution with various amounts of n-octanol. Regardless of low concentration, n-octanol additive depresses considerably the surface tension of the liquids. The pool boiling data, however, reveal that the addition of surfactant results in insignificant enhancement of heat transfer for both pure water and the concentrated LiBr solution. With the results of this work, the performance improvement received from using n-octanol additive in working liquid of an absorption heat pump (AHP) is consequently due to the enhancement of heat and mass transfer in the absorber (but not generator) by the induced interfacial turbulence.

  7. Cobalt-catalyzed hydroalkylation of [60]fullerene with active alkyl bromides: selective synthesis of monoalkylated fullerenes.

    PubMed

    Lu, Shirong; Jin, Tienan; Bao, Ming; Yamamoto, Yoshinori

    2011-08-17

    The Co-catalyzed hydroalkylation of C(60) with reactive alkyl bromides 1 (RBr) in the presence of Mn reductant and H(2)O at ambient temperature gave the monoalkylated C(60) (2) in good to high yields. The use of CoLn/Mn/H(2)O under Ar atmosphere is crucial for the success of the present transformation. The reaction most probably proceeds through the Co(0 or I) complex-promoted generation of a radical (R(•)) followed by addition to C(60). This hydroalkylation method was applied to the synthesis of zinc porphyrin attached C(60) (2l), dendrimer attached C(60) (2m), and fullerene dimer (2n), which were not easily available through the previously known methods.

  8. Neuromuscular complications in patients given Pavulon (pancuronium bromide) during artificial ventilation.

    PubMed

    Op de Coul, A A; Lambregts, P C; Koeman, J; van Puyenbroek, M J; Ter Laak, H J; Gabreëls-Festen, A A

    1985-01-01

    This paper reports on 12 patients in a 3-year period (from 1st July 1980 to 1st July 1983) who were treated with artificial ventilation and with the muscle relaxant pancuronium bromide (Pavulon), over a period of 6 days or longer. After discontinuation of this drug these patients developed severe tetraparesis with areflexia, sometimes combined with disturbances of the extraocular and facial muscles and diffuse muscular atrophy, without sensory disturbances. Seven patients recovered completely after 2-5 months, two made an incomplete recovery and three died due to the primary disease. It is suggested that these neuromuscular complications were caused by prolonged high-dosage Pavulon treatment in combination with renal and hepatic disturbances and/or the use of aminoglucosides.

  9. Strain IMB-1, a novel bacterium for the removal of methyl bromide in fumigated agricultural soils

    USGS Publications Warehouse

    Connell, Hancock T.L.; Costello, A.M.; Lidstrom, M.E.; Oremland, R.S.

    1998-01-01

    A facultatively methylotrophic bacterium, strain IMB-1, that has been isolated from agricultural soil grows on methyl bromide (MeBr), methyl iodide, methyl chloride, and methylated amines, as well as on glucose, pyruvate, or acetate. Phylogenetic analysis of its 16S rRNA gene sequence indicates that strain IMB-1 classes in the alpha subgroup of the class Proteobacteria and is closely related to members of the genus Rhizobium. The ability of strain IMB-1 to oxidize MeBr to CO2 is constitutive in cells regardless of the growth substrate. Addition of cell suspensions of strain IMB-1 to soils greatly accelerates the oxidation of MeBr, as does pretreatment of soils with low concentrations of methyl iodide. These results suggest that soil treatment strategies can be devised whereby bacteria can effectively consume MeBr during field fumigations, which would diminish or eliminate the outward flux of MeBr to the atmosphere.

  10. Bilateral acute angle closure developing due to use of ipratropium bromide and salbutamol.

    PubMed

    Kola, Mehmet; Hacıoğlu, Dilek; Erdöl, Hidayet; Türk, Adem

    2017-02-06

    Acute angle closure can be seen as a side effect of some medications that can be used systemically. In this article, clinical characteristics of 54-year-old female patient who applied to our clinic with bilateral acute angle closure and has been received nebulized form of salbutamol and ipratropium bromide due to asthma for 4 days was evaluated. Right and left eye IOP were measured as 50 and 48 mmHg. IOP was reduced with anti-glaucomatous treatment. and peripheral iridectomy was done, and then the patient was discharged. It is necessary to be careful to prevent contact with the eye of nebulized form of these drugs which may result in angle closure glaucoma when used systemically.

  11. Characterization of potassium bromide crystals grown in the aqueous solution of picric acid

    NASA Astrophysics Data System (ADS)

    Maheswari, J. Uma; Krishnan, C.; Kalyanaraman, S.; Selvarajan, P.

    2016-12-01

    Potassium bromide crystals were grown in the aqueous solution of picric acid by slow evaporation technique at room temperature. X-ray Diffraction (XRD) analysis ensures that the grown sample is in Fm3m space group and FCC structure. Energy Dispersive X-ray Spectroscopy (EDX) reveals the presence of elements in the title compound. UV-Vis-NIR spectrum reveals that the grown sample is a promising nonlinear optical (NLO) material. FTIR analysis confirms the functional groups present in the sample. The thermogravimetric (TG) and differential thermogravimetric (DTA) analyses ensure that the sample material is thermally stable up to 160 °C. The second harmonic efficiency of the sample is 1.3 times greater than that of standard KDP. The mechanical strength of the grown sample is estimated by Vickers microhardness tester. The electrical properties were investigated by impedance analysis and the results of various studies of the grown crystals are discussed.

  12. Carbon nanotubes as an efficient hole collector for high voltage methylammonium lead bromide perovskite solar cells.

    PubMed

    Li, Zhen; Boix, Pablo P; Xing, Guichuan; Fu, Kunwu; Kulkarni, Sneha A; Batabyal, Sudip K; Xu, Wenjing; Cao, Anyuan; Sum, Tze Chien; Mathews, Nripan; Wong, Lydia Helena

    2016-03-28

    A high open circuit voltage (V(OC)) close to 1.4 V under AM 1.5, 100 mW cm(-2) conditions is achieved when carbon nanotubes (CNTs) are used as a hole conductor in methyl ammonium lead bromide (MAPbBr3) perovskite solar cells. Time-resolved photoluminescence and impedance spectroscopy investigations suggest that the observed high V(OC) is a result of the better charge extraction and lower recombination of the CNT hole conductor. Tandem solar cells with all perovskite absorbers are demonstrated with a MAPbBr3/CNT top cell and a MAPbI3 bottom cell, achieving a V(OC) of 2.24 V in series connection. The semitransparent and high voltage MAPbBr3/CNT solar cells show great potential for applications in solar cell windows, tandem solar cells and solar driven water splitting.

  13. Computational study of dissociative electron attachment to π-allyl ruthenium (II) tricarbonyl bromide

    NASA Astrophysics Data System (ADS)

    Thorman, Rachel M.; Bjornsson, Ragnar; Ingólfsson, Oddur

    2016-08-01

    Motivated by the current interest in low energy electron induced fragmentation of organometallic complexes in focused electron beam induced deposition (FEBID) we have evaluated different theoretical protocols for the calculation of thermochemical threshold energies for DEA to the organometallic complex π-allyl ruthenium (II) tricarbonyl bromide. Several different computational methods including density functional theory (DFT), hybrid-DFT and coupled cluster were evaluated for their ability to predict these threshold energies and compared with the respective experimental values. Density functional theory and hybrid DFT methods were surprisingly found to have poor reliability in the modelling of several DEA reactions; however, the coupled cluster method LPNO-pCCSD/2a was found to produce much more accurate results. Using the local correlation pair natural orbital (LPNO) methodology, high level coupled cluster calculations for open-shell systems of this size are now affordable, paving the way for reliable theoretical DEA predictions of such compounds.

  14. Viscosities of cetylpyridinium bromide solutions (aqueous and aqueous KBr) in the presence of alcohols and amines

    SciTech Connect

    David, S.L.; Kumar, S.; Kabir-ud-Din

    1997-01-01

    Among the large number of additives, alcohols hold a special place, being by far the most common cosurfactants which are added to surfactant-oil combinations to generate microemulsions. Though the studies using amines as cosurfactant in microemulsions are few, it has been proved that they are also potential candidates for such formulations. The effect of organic additives (aliphatic/aromatic amines or alcohols) on the viscosities of aqueous and 0.1 M KBr solutions of 0.05 or 0.1 M cetylpyridinium bromide have been measured under Newtonian flow conditions. The viscosity changed dramatically in the presence of KBr. This is explained by the favorable conditions produced by the salt which assists the micellar growth by organic additives with a concomitant enhancement in viscosity. Reasons for the effectiveness of these additives are suggested. The causes of the viscosity decrease at higher concentrations of the additive are also explained.

  15. Permanganate-bromide-silver nanoparticles as a new chemiluminescence system and its application to captopril determination.

    PubMed

    Amjadi, Mohammad; Manzoori, Jamshid L; Hassanzadeh, Javad; Sorouraddin, Mohammad H

    2013-10-15

    A novel chemiluminescence (CL) system based on the oxidation of bromide by permanganate in sulfuric acid medium is introduced. The enhancing effect of silver nanoparticles (NPs), synthesized by chemical reduction method, on this reaction was studied. It was demonstrated that spherical silver nanoparticles with average size of 18 nm had a most remarkable catalytic effect on this reaction. CL emission wavelengths and UV-vis spectra were used to characterize the system and propose a possible mechanism. Furthermore, it was found that captopril inhibits the action of NPs and decreases the intensity of CL. Based on this phenomenon, a new CL method was developed for the determination of captopril in the 3.0 × 10(-10) to 1.0 × 10(-7) mol L(-1) concentration range with a detection limit (3s) of 0.12 nmol L(-1). The method was successfully applied to the determination of captopril in pharmaceutical formulations, human urine and serum samples.

  16. The distribution of toluene in intercalation complexes of a vermiculite and alkyl trimethylammonium bromides.

    PubMed

    Williams-Daryn, S; Thomas, R K; Castro, M A; Becerro, A I

    2003-11-15

    Neutron diffraction and isotopic labeling have been used to determine the distribution of toluene sorbed into the interlamellar space of complexes of vermiculite with alkyl trimethylammonium bromide complex of alkyl chain lengths C(12), C(14), and C(16) and in a mixed C(12)/C(16) complex. The toluene remains in a liquid-like form and fills and swells the interlamellar space space up to a point where there remains a small amount of overlap of the alkyl chains of the surfactant. If the complex is between vermiculite and one surfactant only this results in the toluene concentration being reduced in the center of the interlamellar space, with maxima on either side. On the other hand, in a complex of mixed-length surfactants, the toluene distribution reaches its maximum at the center of the interlamellar space.

  17. Determination of hexabromocyclododecane in waste waters with a bromide-selective electrode

    SciTech Connect

    Paama, L.A.; Kokk, K.Y.

    1985-11-01

    This paper presents a method for the determination of microquantities of hexabromocyclodecane (HBCD), an antipyrene for the reduction of the flammability of frothing polystyrene in industrial waste waters. The method is based on the extraction of HBCD from waste waters with chloroform, evaporation of the chloroform from the extracts in a stream of air, mineralization of the dry residues, and determination of the bromide ions with a bromine-selective electrode. One of the simpler approaches is given as based on alkaline hydrolysis with dimethyl formamide or in the presence of metallic cadmium. The dry residues after evaporation of the chloroform were decomposed by boiling in a KOH solution in the presence of metallic zinc.

  18. Fabrication of diisopropylammonium bromide aligned microcrystals with in-plane uniaxial polarization

    NASA Astrophysics Data System (ADS)

    Poddar, Shashi; Lu, Haidong; Song, Jingfeng; Goit, Om; Valloppilly, Shah; Gruverman, Alexei; Ducharme, Stephen

    2016-12-01

    Textured arrays of ferroelectric microcrystals of diisopropylammonium bromide were grown from solution at room temperature onto silicon substrates and studied by means of x-ray diffraction, atomic force microscopy, electron microscopy, and piezoresponse force microscopy. The needle-shaped crystals had dimensions of approximately 50 µm  ×  5 µm in the plane and were approximately 200 nm thick, where the dimensions and arrangement were influenced by growth conditions. The observations suggest an Ostwald ripening mechanism of the microcrystal growth. The crystals had the structure of the ferroelectric phase, where the polarization axis was in-plane and parallel to the long axis of the crystals. The in-plane polarization could be switched at will with a scanning probe tip bias of 15 V and could be arranged in stable domain patterns with both charged and uncharged 180° domain walls.

  19. Copper-Mediated Perfluoroalkylation of Heteroaryl Bromides with (phen)CuRF

    PubMed Central

    2015-01-01

    The attachment of perfluoroalkyl groups onto organic compounds has been a major synthetic goal over the past several decades. Previously, our group reported phenanthroline-ligated perfluoroalkyl copper reagents, (phen)CuRF, which react with aryl iodides and aryl boronates to form the corresponding benzotrifluorides. Herein the perfluoroalkylation of a series of heteroaryl bromides with (phen)CuCF3 and (phen)CuCF2CF3 is reported. The mild reaction conditions allow the process to tolerate many common functional groups. Perfluoroethylation with (phen)CuCF2CF3 occurs in somewhat higher yields than trifluoromethylation with (phen)CuCF3, creating a method to generate fluoroalkyl heteroarenes that are less accessible from trifluoroacetic acid derivatives. PMID:24621138

  20. Reaction of myeloperoxidase compound I with chloride, bromide, iodide, and thiocyanate.

    PubMed

    Furtmüller, P G; Burner, U; Obinger, C

    1998-12-22

    Myeloperoxidase plays a fundamental role in oxidant production by neutrophils. The enzyme uses hydrogen peroxide to oxidize chloride (Cl-), bromide (Br-), iodide (I-), and the pseudohalide thiocyanate (SCN-) to their respective hypohalous acids. This study for the first time presents transient kinetic measurements of the oxidation of these halides and thiocyanate by the myeloperoxidase intermediate compound I, using the sequential mixing stopped-flow technique. At pH 7 and 15 degrees C, the two-electron reduction of compound I to the native enzyme by Cl- has a second-order rate constant of (2.5 +/- 0.3) x 10(4) M(-1) s(-1), whereas reduction of compound I by SCN- has a second-order rate constant of (9.6 +/- 0.5) x 10(6) M(-1) s(-1). Iodide [(7.2 +/- 0.7) x 10(6) M(-1) s(-1)] is shown to be a better electron donor for compound I than Br- [(1.1 +/- 0.1) x 10(6) M(-1) s(-1)]. The pH dependence studies suggest that compound I reduction by (pseudo-)halides is controlled by a residue with a pKa of about 4.6. The protonation of this group is necessary for optimum (pseudo-)halide anion oxidation. These transient kinetic results are underlined by steady-state spectral and kinetic investigations. SCN- is shown to be most effective in shifting the system myeloperoxidase/hydrogen peroxide from the peroxidatic cycle to the halogenation cycle, whereas iodide is shown to be more effective than bromide which in turn is much more effective than chloride. Decreasing pH increases the rate of this transition. Our results show that thiocyanate is an important substrate of myeloperoxidase in most environments and that hypothiocyanate is likely to contribute to leukocyte antimicrobial activity.