Science.gov

Sample records for 1-butyl-3-methylimidazolium chloride bmimcl

  1. Novel Electroactive-paper Gel Preparations via 1-butyl-3-methylimidazolium chloride (BMIMCl) Solvent

    NASA Astrophysics Data System (ADS)

    Kunchornsup, Wissawin; Sirivat, Anuvat

    2010-03-01

    Papers used in the field of electro-responsive applications are known as Electroactive-papers (EAPaps), consisting primarily of a cellulose. 1-butyl-3-methylimidazolium chloride (BMIMCl) is an interesting ionic liquid that acts as an effective cellulose solvent for EAPap due to its high solubility without chain derivatization, less chain degradation, and stability in electro-responsive applications. In our work, physical and chemical cellulose gels were fabricated and studied for the effects of varying crosslinking ratio (CR) and aging time (tag), with glutaraldehyde (GA) acting as the crosslinking agent. The crosslinking reaction conversion could be increased by increasing the CR and tag; the reaction products are ketone linkages and by-product water molecules. A difference in optical properties could be observed and related to the differing amounts of ketone linkages, as confirmed by FTIR-ATR, and the degradation temperature (Td). Our paper-gels showed potential characteristics towards electro-responsive applications: less preparation time (< 14 hours) and stable gel properties.

  2. Electron density analysis of 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    del Olmo, Lourdes; Morera-Boado, Cercis; López, Rafael; García de la Vega, José M

    2014-06-01

    An analysis of the electron density of different conformers of the 1-butyl-3-methylimidazolium chloride (bmimCl) ionic liquid by using DFT through the BVP86 density functional has been obtained within the framework of Bader's atom in molecules (AIM), localized orbital locator (LOL), natural bond orbital (NBO), and deformed atoms in molecules (DAM). We also present an analysis of the reduced density gradients that deliver the non-covalent interaction regions and allow to understand the nature of intermolecular interactions. The most polar conformer can be characterized as ionic by AIM, LOL, and DAM methods while the most stable and the least polar shows shared-type interactions. The NBO method allows to comprehend what causes the stabilization of the most stable conformer based on analysis of the second-order perturbative energy and the charge transferred among the natural orbitals involved in the interaction. PMID:24878801

  3. Characterization of cellulose II nanoparticles regenerated from ionic liquid, 1-butyl-3-methylimidazolium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC)and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in ...

  4. Comparison and Characterisation of Regenerated Chitosan from 1-Butyl-3-methylimidazolium Chloride and Chitosan from Crab Shells

    PubMed Central

    Arnold, Lyndon

    2015-01-01

    Chitosan is a biopolymer derived from chitin which is naturally occurring in the exoskeleton of crustaceans. This paper reports dissolution and regeneration of chitosan by directly dissolving in an ionic liquid solvent, 1-butyl-3-methylimidazolium chloride (BMIMCl). This will provide an ideal platform to solubilise these kinds of polymers to achieve the dissolution. The current study dissolved chitosan from crab shell utilising BMIMCl as a solvent and characterised the resultant regenerated polymer. The regenerated chitosan showed increased hydrogen bonding when characterised by Fourier transform infrared (FTIR) spectral analysis. In addition, the study also compared the characteristics of regenerated and generic chitosan. The regenerated chitosan was also evaluated for antimicrobial properties and showed to possess antibacterial features similar to the commercial grade. This method can be utilised in future for blending of polymers with chitosan in a dissolved phase. PMID:26090452

  5. Rapid dissolution of switchgrass in 1-butyl-3-methylimidazolium chloride by ultrasonication.

    PubMed

    Montalbo-Lomboy, Melissa; Grewell, David

    2015-01-01

    The utilization of ultrasonics to rapidly dissolve switchgrass in ionic liquid, 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) was evaluated in this work. The objective of the study focused on determining the effects of various ultrasonic conditions on the recovery of carbohydrate from biomass, lignin removal, and enzymatic hydrolysis. Dried ground switchgrass was added to ionic liquid, then sonicated at a frequency of 20kHz. The experiments were conducted using a catenoidal horn at varying amplitudes of 96μm, 128μm, and 160μm and sonication times of 2, 3, and 4min. Similarly, ground switchgrass was dissolved in ionic liquid assisted by conventional heat treatment at 130°C for 12 and 24h. The results showed good delignification results of 53% for the 24h heat pretreated samples and of 50.8% for ultrasonic assisted samples at 160μm amplitude and 4min. Even in the presence of lignin in the recovered biopolymer, both of heat treated and ultrasonicated samples obtained 100% glucan digestibility after only 3h of enzymatic hydrolysis. Heat pretreated samples exhibited 44-59% lower xylan digestibility compared to ultrasonic pretreated samples (160μm amplitude and 4min sonication time). Scanning electron microscope images displayed significant changes in biomass structure from intact and crystalline of the untreated biomass to disintegrated and amorphous of the treated biomass (heat treated and ultrasonicated). With increasing ultrasonic amplitude the carbohydrate recovery decreased. Also, more than 50% of the hemicellulose fraction was lost during biomass recovery. Overall, it was concluded that ultrasonication was a promising technology to enhance dissolution of lignocellulose in ionic liquid. PMID:25041976

  6. Reductive splitting of cellulose in the ionic liquid 1-butyl-3-methylimidazolium chloride.

    PubMed

    Ignatyev, Igor A; Van Doorslaer, Charlie; Mertens, Pascal G N; Binnemans, Koen; De Vos, Dirk E

    2010-01-01

    The depolymerization of cellulose is carried out in the ionic liquid 1-butyl-3-methylimidazolium chloride in the presence of hydrogen gas. First, the ketal 1,1-diethoxycyclohexane and cellobiose were used as model substrates. For the depolymerization of cellulose itself, the combination of a heterogeneous metal catalyst and a homogeneous ruthenium catalyst proved effective. One of the possible roles of the ruthenium compound is to enhance the transfer of hydrogen to the metallic surface. The cellulose is fully converted under relatively mild conditions, with sorbitol as the dominant product in 51-74% yield. PMID:20049766

  7. Synthesis, characterization and application of 1-butyl-3 methylimidazolium chloride as green material for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Varma, Mahesh N; Shende, Diwakar Z; Yoo, Chang Kyoo; Wasewar, Kailas L

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, (1)H-NMR, and (13)C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  8. Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel

    PubMed Central

    Dharaskar, Swapnil A.; Varma, Mahesh N.; Shende, Diwakar Z.; Yoo, Chang Kyoo; Wasewar, Kailas L.

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  9. Characterization of cellulose II nanoparticles regenerated from 1-butyl-3-methylimidazolium chloride.

    PubMed

    Han, Jingquan; Zhou, Chengjun; French, Alfred D; Han, Guangping; Wu, Qinglin

    2013-05-15

    Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC) and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in contrast to the cellulose I form of the starting materials. Also, the RCNs have decreased crystallinity and crystallite size. The elongated RCNs produced from cotton and MCC had average lengths of 123 ± 34 and 112 ± 42 nm, and mean widths of 12 ± 5 and 12 ± 3 nm, respectively. The average diameter of spherical RCNs from MCC was 118 ± 32nm. The dimensions of the various RCNs were all well fitted with an asymmetrical log-normal distribution function. The RCN has a two-step pyrolysis, different from raw MCC and cotton that have a one-step process. PMID:23544632

  10. The genotoxic and cytotoxic effects of 1-butyl-3-methylimidazolium chloride in soil on Vicia faba seedlings.

    PubMed

    Liu, Tong; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Xie, Hui

    2015-03-21

    Although considered as "green" solvents, the toxic effects of ionic liquids (ILs) on organisms have been widely investigated in recent years. However, studies on the toxic effects of ILs on plants all focus on toxicity in nutrient solution. In the present paper, the toxic effects of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) on Vicia faba seedlings in soil at 0, 500, 1500, and 2500 mg kg(-1) on day 10 were studied. The present results showed that the growth of V. faba seedlings may be seriously inhibited when the IL concentrations were higher than 500 mg kg(-1). The EC50 values for shoot length, root length, and dry weight were 3886, 2483, and 3359 mg kg(-1), respectively. In addition, [C4mim]Cl caused lipid peroxidation and DNA damage at 500 mg kg(-1) and oxidative stress at 1500 mg kg(-1), which indicated that [C4mim]Cl may have genotoxicity and cytotoxicity on V. faba seedlings. Moreover, oxidative damage may be the main toxic mechanism of ILs. PMID:25462868

  11. Effect of 1-Butyl-3-methylimidazolium Halide on the Relative Stability between Sodium Dodecyl Sulfate Micelles and Sodium Dodecyl Sulfate-Poly(ethylene oxide) Nanoaggregates.

    PubMed

    Ferreira, Gabriel M Dias; Ferreira, Guilherme M Dias; Agudelo, Álvaro J Patiño; Hespanhol da Silva, Maria C; Rezende, Jaqueline de Paula; Pires, Ana Clarissa Dos Santos; da Silva, Luis Henrique Mendes

    2015-12-24

    It is well-known that ionic liquids (ILs) alter the properties of aqueous systems containing only surfactants. However, the effect of ILs on polymer-surfactant systems is still unknown. Here, the effect of 1-butyl-3-methylimidazolium bromide (bmimBr) and chloride (bmimCl) on the micellization of sodium dodecyl sulfate (SDS) and its interaction with poly(ethylene oxide) (PEO) was evaluated using conductimetry, fluorimetry, and isothermal titration calorimetry. The ILs decreased the critical micellar concentration (cmc) of the surfactant, stabilizing the SDS micelles. A second critical concentration (c2thc) was verified at high SDS concentrations, due to the micelle size decrease. The stability of PEO/SDS aggregates was also affected by ILs, and the critical aggregation concentration (cac) of SDS increased. Integral aggregation enthalpy changed from -0.72 in water to 2.16 kJ mol(-1) in 4.00 mM bmimBr. IL anions did not affect the SDS micellization or the beginning of PEO/SDS aggregation. Nevertheless, when chloride was replaced with bromide, the amount of SDS bound to the polymer increased. At 100.0 mM IL, the PEO-SDS interaction vanished. We suggest that the effect of ILs comes from participating in the structure of the formed aggregates, interacting with the SDS monomers at the core/interface of the micelles, and promoting preferential solvation of the polymer. PMID:26595360

  12. MICROWAVE-ASSISTED PREPARATION OF 1-BUTYL-3-METHYLIMIDAZOLIUM TETRACHLOROGALLATE AND ITS CATALYTIC USE IN ACETAL FORMATION UNDER MILD CONDITIONS

    EPA Science Inventory

    1-Butyl-3-methylimidazolium tetrachlorogallate, [bmim][GaCl4], prepared via microwave-assisted protocol, is found to be an active catalyst for the efficient acetalization of aldehydes under mild conditions.

  13. Green polymer electrolytes based on chitosan and 1-butyl-3-methylimidazolium acetate

    SciTech Connect

    Shamsudin, Intan Juliana; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2014-09-03

    Green polymer electrolytes based on chitosan as the polymer matrix and ionic liquid 1-butyl-3-methylimidazolium acetate [Bmim][OAc] as charge carriers were prepared by solution casting technique. Complexes with various amount of ionic liquid loading were investigated as possible ionic conducting polymers. The ionic conductivity was found to increase with increasing weight percent of ionic liquid. The highest ionic conductivity of the charged chitosan-[Bmim][OAc] was 2.44 × 10{sup −3} S cm{sup −1} at 90 wt.% of [Bmim][OAc] content at ambient temperature. Attenuated Total Reflection Fourier Transform infrared (ATR-FTIR) spectroscopy has proven the interaction between chitosan and [Bmim][OAc]. X-ray Diffraction (XRD) has shown that the amorphosity of the complexes increase as the amount of [Bmim][OAc] increase.

  14. Synthesis, characterization, and application of 1-butyl-3-methylimidazolium thiocyanate for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Wasewar, Kailas L; Varma, Mahesh N; Shende, Diwakar Z

    2016-05-01

    1-Butyl-3-methylimidazolium thiocyanate [BMIM]SCN has been presented on extractive desulfurization of liquid fuel. The FTIR, (1)H-NMR, and C-NMR have been discussed for the molecular confirmation of synthesized [BMIM]SCN. Further, thermal, conductivity, moisture content, viscosity, and solubility analyses of [BMIM]SCN were carried out. The effects of time, temperature, sulfur compounds, ultrasonication, and recycling of [BMIM]SCN on removal of dibenzothiophene from liquid fuel were also investigated. In extractive desulfurization, removal of dibenzothiophene in n-dodecane was 86.5 % for mass ratio of 1:1 in 30 min at 30 °C under the mild process conditions. [BMIM]SCN could be reused five times without a significant decrease in activity. Also, in the desulfurization of real fuels, multistage extraction was examined. The data and results provided in the present paper explore the significant insights of imidazolium-based ionic liquids as novel extractant for extractive desulfurization of liquid fuels. PMID:26139406

  15. DFT study of 1-butyl-3-methylimidazolium salicylate: a third-generation ionic liquid.

    PubMed

    Armaković, Stevan; Armaković, Sanja J; Vraneš, Milan; Tot, Aleksandar; Gadžurić, Slobodan

    2015-09-01

    A detailed theoretical investigation of the third-generation ionic liquid (IL) 1-butyl-3-methylimidazolium salicylate ([BMIM][Sal]), performed within the framework of density functional theory (DFT), is presented in this paper. The B3LYP-D3, M06-2X, and M06-2X-D3 functionals were used to obtain the equilibrium geometries of the two ions [BMIM](+) and [Sal](-). It is shown that the equilibrium ion geometries obtained with the dispersion-corrected B3LYP functional are very close to the ion geometries obtained with the M06-2X and M06-2X-D3 functionals. Global reactivity was assessed using molecular orbital theory and quantum molecular descriptors. Molecular electrostatic potential (MEP) surfaces and average local ionization energy (ALIE) surfaces were created in order to elucidate the charge distribution and reactivity of the investigated IL. Ion-pair binding energies were calculated with all three functionals, and the results confirmed the presence of a strong electrostatic interaction between the ions, while further insight into the interactions between the two ions was obtained by analyzing noncovalent interactions based on the reduced density gradient (RDG) surface, which revealed a total of nine interactions between the ions. Finally, the aromaticity of each ion was investigated by calculating the nucleus-independent chemical shift (NICS) parameter, which indicated that significant changes in the charge delocalization on each ion occur when the two ions interact. PMID:26318199

  16. Electrodeposition of Nanocrystalline Chromium Coatings Based on 1-Butyl-3-Methylimidazolium-Bromide Ionic Liquid.

    PubMed

    He, Xinkuai; Zhu, Qingyun; Hou, Bailong; Cai, Youxing; Li, Chen; Fu, Liqin; Wu, Luye

    2015-12-01

    The electrochemical behavior of trivalent chromium reduction from 1-butyl-3-methylimidazolium-bromide ([BMIM]Br) ionic liquid is studied. The result of cyclic voltammetry shows that the Cr(III) reduction is irreversible and occurs in two steps, Cr(III)to Cr(II), and Cr(II) to Cr(0), respectively. In the electrochemical impedance spectroscopy measurements, the preferable equivalent circuit is made to fit the experimental data. The effects of electroplating parameters on coating thickness and electrodepositon rate are investigated by potentiostatic method on Cu electrode from Cr(III)-[BMIM]Br solution. The results show that the temperature and depositing potential have great effect on the coating thickness and electrodeposition rate. The surface morphology and composition of deposited Cr are investigated using scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS). SEM analysis shows that chromium electrodeposits obtained on Cu electrodes present a ball-like structure. EDS analysis shows that the coatings are composed of Cr. Moreover, the corrosion resistance of the as-deposited chromium layer is evaluated using polarization curves. The results show that the corrosion resistance of the chromium coatings obtained at higher potential is better. PMID:26682363

  17. Influence of counterions on micellization of tetramethylammonium perfluorononanoic carboxylate in 1-butyl-3-methylimidazolium ionic liquid.

    PubMed

    Long, Panfeng; Chen, Jingfei; Wang, Dong; Hu, Ziqi; Gao, Xuedong; Li, Ziran; Hao, Jingcheng

    2012-07-01

    The influence of counterions on micellization of perfluorononanoic carboxylate ammonium salts in water and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)) solutions was investigated by surface tension and (19)F NMR measurements and freeze-fracture transmission electron microscopy (FF-TEM) observations. Changes in the counterions of the fluorocarbon surfactants have different effects on the two solvents. With the increase of counterion volume, the critical micelle concentration (cmc) value of relevant fluorinated surfactant decreases in aqueous solutions. This is because the counterions with larger size, such as (+)N(CH(3))(4), can be little hydrated, which can screen the electrostatic repulsion of the headgroups of the fluorocarbon surfactant and thus facilitate micelle formation. However, the fluorocarbon surfactants can dissolve and form micelles in [bmim]BF(4) only when they provide with largest counterion such as (+)N(CH(3))(4). This is because the counterion, (+)N(CH(3))(4), disperses the charge of the cations, which could weaken the electrostatic interaction between the ion pair of the surfactant, leading to a higher degree of counterion binding. The thermodynamic parameters estimated from the temperature dependence of the cmc values tell us that the micelle formation for tetramethylammonium perfluorononanoic carboxylate (C(8)F(17)COON(CH(3))(4), PFNT) in ionic liquids (ILs) is an entropy-driven process at low temperature but an enthalpy-driven process at high temperature. The driving force of the micellization for fluorocarbon surfactants in [bmim]BF(4) is the solvophobic effect, due to the hydrophobic and oleophobic properties of fluorocarbon chains. PMID:22690854

  18. Enzymatic synthesis of poly-L-lactide-co-glycolide in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate.

    PubMed

    Mena, María; Chanfreau, Sébastien; Gimeno, Miquel; Bárzana, Eduardo

    2010-11-01

    This article reports the lipase-catalyzed ring-opening copolymerization of L-lactide (LLA) and glycolide using the commercially available ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate as solvent media. Candida antarctica lipase B, immobilized in an acrylic support was used as biocatalyst. The reaction temperature had a direct influence on yields and molecular weights of the copolymers as well as LLA incorporation. The materials presented semi-crystalline structures assessed by DSC and powder XR diffraction analyses. PMID:20490553

  19. Multiprobe Spectroscopic Inverstigation of Molecular-level Behavior within Aqueous 1-Butyl-3-methylimidazolium Tetrafluoroborate

    SciTech Connect

    Sarkar, Abhra; Ali, Maroof; Baker, Gary A; Tetin, Sergey Y.; Ruan, Qiaoqiao; Pandey, Siddharth

    2009-01-01

    In this work, an array of molecular-level solvent featuressincluding solute-solvent/solvent-solvent interactions, dipolarity, heterogeneity, dynamics, probe accessibility, and diffusionswere investigated across the entire composition of ambient mixtures containing the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4], and pH 7.0 phosphate buffer, based on results assembled for nine different molecular probes utilized in a range of spectroscopic modes. These studies uncovered interesting and unusual solvatochromic probe behavior within this benchmark mixture. Solvatochromic absorbance probessa watersoluble betaine dye (betaine dye 33), N,N-diethyl-4-nitroaniline, and 4-nitroanilineswere employed to determine ET (a blend of dipolarity/polarizability and hydrogen bond donor contributions) and the Kamlet-Taft indices * (dipolarity/polarizability), R (hydrogen bond donor acidity), and (hydrogen bond acceptor basicity) characterizing the [bmim][BF4] + phosphate buffer system. These parameters each showed a marked deviation from ideality, suggesting selective solvation of the individual probe solutes by [bmim][BF4]. Similar conclusions were derived from the responses of the fluorescent polarity-sensitive probes pyrene and pyrene-1-carboxaldehyde. Importantly, the fluorescent microfluidity probe 1,3-bis(1-pyrenyl)propane senses a microviscosity within the mixture that significantly exceeds expectations derived from simple interpolation of the behavior in the neat solvents. On the basis of results from this probe, a correlation between microviscosity and bulk viscosity was established; pronounced solvent-solvent hydrogen-bonding interactions were implicit in this behavior. The greatest deviation from ideal additive behavior for the probes studied herein was consistently observed to occur in the buffer-rich regime. Nitromethane-based fluorescence quenching of pyrene within the [bmim][BF4] + phosphate buffer system showed unusual compliance with a sphere

  20. Local Structure in Terms of Nearest-Neighbor Approach in 1-Butyl-3-methylimidazolium-Based Ionic Liquids: MD Simulations.

    PubMed

    Marekha, Bogdan A; Koverga, Volodymyr A; Chesneau, Erwan; Kalugin, Oleg N; Takamuku, Toshiyuki; Jedlovszky, Pál; Idrissi, Abdenacer

    2016-06-01

    Description of the local microscopic structure in ionic liquids (ILs) is a prerequisite to obtain a comprehensive understanding of the influence of the nature of ions on the properties of ILs. The local structure is mainly determined by the spatial arrangement of the nearest neighboring ions. Therefore, the main interaction patterns in ILs, such as cation-anion H-bond-like motifs, cation-cation alkyl tail aggregation, and ring stacking, were considered within the framework of the nearest-neighbor approach with respect to each particular interaction site. We employed classical molecular dynamics (MD) simulations to study in detail the spatial, radial, and orientational relative distribution of ions in a set of imidazolium-based ILs, in which the 1-butyl-3-methylimidazolium (C4mim(+)) cation is coupled with the acetate (OAc(-)), chloride (Cl(-)), tetrafluoroborate (BF4(-)), hexafluorophosphate (PF6(-)), trifluoromethanesulfonate (TfO(-)), or bis(trifluoromethanesulfonyl)amide (TFSA(-)) anion. It was established that several structural properties are strongly anion-specific, while some can be treated as universally applicable to ILs, regardless of the nature of the anion. Namely, strongly basic anions, such as OAc(-) and Cl(-), prefer to be located in the imidazolium ring plane next to the C-H(2/4-5) sites. By contrast, the other four bulky and weakly coordinating anions tend to occupy positions above/below the plane. Similarly, the H-bond-like interactions involving the H(2) site are found to be particularly enhanced in comparison with the ones at H(4-5) in the case of asymmetric and/or more basic anions (C4mimOAc, C4mimCl, C4mimTfO, and C4mimTFSA), in accordance with recent spectroscopic and theoretical findings. Other IL-specific details related to the multiple H-bond-like binding and cation stacking issues are also discussed in this paper. The secondary H-bonding of anions with the alkyl hydrogen atoms of cations as well as the cation-cation alkyl chain

  1. ALPHA-AMYLASE ACTIVITY IN VARIOUS CONCENTRATIONS OF THE IONIC LIQUID, 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch is an extremely abundant, economical and versatile industrial commodity. Many industrial uses of starch depend on hydrolyzing the polymer for the conversion of glucose and maltodextrins. Starch hydrolysis is frequently achieved by utilizing alpha-amylase, which is an endo-acting enzyme that...

  2. Glycine in 1-butyl-3-methylimidazolium acetate and trifluoroacetate ionic liquids: effect of fluorination and hydrogen bonding.

    PubMed

    Podgoršek, Ajda; Macchiagodena, Marina; Ramondo, Fabio; Costa Gomes, Margarida F; Pádua, Agílio A H

    2012-05-14

    The solvation of glycine in two ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate, [C(1)C(4)Im][OAc], and 1-butyl-3-methylimidazolium trifluoroacetate, [C(1)C(4)Im][TFA], was studied by a combination of experimental and theoretical methods. The solubility of glycine in both ILs was determined at 333.15 K to be (8.1±0.5) and (1.0±0.5) wt % in [C(1)C(4)Im][OAc] and [C(1)C(4)Im][TFA], respectively. By IR spectroscopy it was found that, when dissolved in the ILs, glycine was mainly present in its zwitterionic form. Structural and energetic aspects of the solvation of glycine in the ILs and in mixtures of ILs and water were investigated by ab initio calculations and molecular dynamic simulations. It was observed that the firstly solvation shell around glycine consisted predominantly of acetate or trifluoroacetate anions, which formed hydrogen bonds either with the carboxylic group of neutral glycine or with the protonated ammonium group of the zwitterionic form. When water is present in the solutions, hydrogen bonds between water and the anion prevail. The overall energy of the system was decomposed into its components between pairs of species. It was established that the dominant contribution to the interaction energy between glycine and the IL was due to hydrogen bonds with the anions and the statistics of hydrogen bonds were analysed. PMID:22434786

  3. Swelling and hydrolysis kinetics of Kraft pulp fibers in aqueous 1-butyl-3-methylimidazolium hydrogen sulfate solutions.

    PubMed

    Mao, Jia; Abushammala, Hatem; Pereira, Laura Barcellos; Laborie, Marie-Pierre

    2016-11-20

    1Butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO4) is efficient at extracting cellulose nanocrystals from pulp fibers. To shed some light on the respective contributions of swelling and hydrolysis of pulp fibers by [Bmim]HSO4, the physical, structural and morphological characteristics of hardwood Kraft pulp fibers were monitored under various conditions of temperature, water content and time. Swelling was largely compounded by hydrolysis at the highest temperatures (120°C) as evidenced by mass loss and reduced degree of polymerization (DPn) at this temperature. At 120°C only, water content appeared to play a significant role on the extent of hydrolysis. At this temperature, a heterogeneous kinetic model involving weak links and amorphous regions best described the experimental data. Hydrolysis rates were maximum at 25% water content in the aqueous ionic liquid. PMID:27561498

  4. Anomalous Freezing of Nano-Confined Water in Room-Temperature Ionic Liquid 1-Butyl-3-Methylimidazolium Nitrate.

    PubMed

    Abe, Hiroshi; Takekiyo, Takahiro; Yoshimura, Yukihiro; Saihara, Koji; Shimizu, Akio

    2016-04-18

    Non-crystal formation of ice is investigated by simultaneous X-ray diffraction and differential scanning calorimetry measurements upon cooling to -100 °C. At room temperature, size-tunable water confinement (≈20 Å size) in a room-temperature ionic liquid (RTIL, 1-butyl-3-methylimidazolium nitrate, [C4 mim][NO3 ]) exists in a water-rich region (70-90 mol % D2 O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C4 mim][NO3 ]-x mol % D2 O (70

  5. Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

    NASA Astrophysics Data System (ADS)

    Fei, Beatrice Wong Chui; Hanifah, Sharina Abu; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2015-09-01

    Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10-4 S cm-1 at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

  6. Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

    SciTech Connect

    Fei, Beatrice Wong Chui; Hanifah, Sharina Abu; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2015-09-25

    Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10{sup −4} S cm{sup −1} at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

  7. Transport properties of binary mixtures of carbon dioxide and 1-butyl-3-methylimidazolium hexafluorophosphate studied by transient grating spectroscopy.

    PubMed

    Demizu, Masashi; Terazima, Masahide; Kimura, Yoshifumi

    2008-10-01

    Transient grating spectroscopy was applied to measurements of sound velocity and thermal diffusivity in binary mixture solutions of carbon dioxide (CO(2)) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF(6)]) along the saturated line of CO(2) at 40 degrees C up to 20.0 MPa. The sound velocity decreased more than 10% by increasing the pressure to 10 MPa, and the pressure effect was very small above 10 MPa. The change in the thermal diffusivity was small. The translational diffusion coefficients of carbon monoxide, diphenylacetylene (DPA), and diphenylcyclopropenone (DPCP) were also determined. The diffusion coefficients increased up to 10 MPa, and the pressure effect was almost saturated above 10 MPa. The pressure dependence of the diffusion coefficients of DPCP and DPA was larger than that of carbon monoxide. The results are discussed in relation with the viscosity change caused by applying pressure. PMID:18845895

  8. Dynamics of graphene nanoribbon with carbon nanotubes coexisting with [Bmim][Cl] molecules

    NASA Astrophysics Data System (ADS)

    Li, Yunfang

    2015-09-01

    Molecular dynamics simulations have been performed to investigate the dynamics of graphene nanoribbon (GNR) on single-walled carbon nanotubes (SWNTs) coexisting with 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]). The results indicate that in the wrapping and encapsulating processes when GNR interacts with SWNT, [Bmim][Cl] has an extremely different dynamics, showing an interesting dependence on tube size. Two GNRs can easily bring the [Bmim][Cl] into the hollow area of the formed double helix in the SWNT. The sequence of the interaction between these substances is E GNR-SWNT > E GNR-[Bmim][Cl] > E [Bmim][Cl]-SWNT. A high temperature will hinder the wrapping dynamics behavior of the GNR and even militate against the insertion dynamics of [Bmim][Cl]. The [Bmim][Cl] has nearly no effect on the dynamics of GNR on SWNT. Furthermore, the GNR can transport [Bmim][Cl] in the SWNT by expelling them. The proposed discoveries eventually provide a powerful way to fabricate nanoscale materials and devices and eventually tune their properties.

  9. Experimental and quantum study of corrosion of A36 mild steel towards 1-butyl-3-methylimidazolium tetrachloroferrate ionic liquid

    NASA Astrophysics Data System (ADS)

    Ullah, Sami; Bustam, Mohamad Azmi; Shariff, Azmi Mohamad; Gonfa, Girma; Izzat, Khairul

    2016-03-01

    The corrosion behaviour of ionic liquid 1-butyl-3-methylimidazolium tetrachloroferrate ([C4C1im][FeCl4]) towards A36 mild steel was studied through experiments and quantum calculations. The corrosion rates were obtained through immersion tests both in open and controlled environments. The surface morphology of the A36 mild steel was investigated using scanning electron microscopy (SEM). The effects of temperature and water content on the corrosion of the ionic liquid towards A36 mild steel were studied through electrochemical corrosion measurement techniques. The results show that the corrosion of [C4C1im][FeCl4] towards the mild steel in the open environment is 17 times higher than in the control environment. The corrosion rate increases with increasing temperature and water content in [C4C1im][FeCl4]. Density Functional Theory (DFT) calculations were performed to gain some insight into the interactions of [C4C1im][FeCl4] with the A36 mild steels surface.

  10. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    SciTech Connect

    Lisal, Martin; Izak, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  11. Role of solubilized water in micelles formed by Triton X-100 in 1-butyl-3-methylimidazolium ionic liquids.

    PubMed

    Li, Na; Zhang, Shaohua; Ma, Hongchao; Zheng, Liqiang

    2010-06-15

    We demonstrate here the aggregation behavior of a nonionic surfactant Triton X-100 in two 1-butyl-3-methylimidazolium ionic liquids (the hydrophilic IL [bmim][BF(4)] and the hydrophobic IL [bmim][PF(6)]) by surface tension measurements. The effects of added water on the microstructure of Triton X-100 in ILs micelles are investigated. When small amounts of water are added to Triton X-100 in [bmim][PF(6)] micelles, the water molecules are first bound to the ethylene oxide (EO) units of Triton X-100 and then form the water pool in the core of the microemulsion. When water molecules are added to the Triton X-100 in [bmim][BF(4)] micelles, there is no microemulsion formed; these water molecules are first solubilized in [bmim][BF(4)]. When the solubilization is saturated, the water molecules start to bind to the EO group of Triton X-100; these results are confirmed by UV-vis, FTIR, and (1)H NMR spectra. PMID:20302278

  12. Catalytic activities of fungal oxidases in hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate-based microemulsion.

    PubMed

    Zhou, Gui-Ping; Zhang, Yun; Huang, Xi-Rong; Shi, Chuan-Hong; Liu, Wei-Feng; Li, Yue-Zhong; Qu, Yin-Bo; Gao, Pei-Ji

    2008-10-01

    For hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]), an H(2)O-in-[BMIM][PF(6)] microemulsion could be formed in the presence of nonionic surfactant Triton X-100 (TX-100). In such a medium, both lignin peroxidase (LiP) and laccase could express their catalytic activity with the optimum molar ratio of H(2)O to TX-100 at 8.0 for LiP and >20 for laccase, and the optimum pH values at 3.2 for LiP and 4.2 for laccase, respectively. As compared with pure or water saturated [BMIM][PF(6)], in which the two oxidases had negligible catalytic activity due to the strong inactivating effect of [BMIM][PF(6)] on both enzymes, the use of the [BMIM][PF(6)]-based microemulsion had some advantages. Not only the catalytic activities of both fungal oxidases greatly enhanced, but also the apparent viscosity of the medium decreased. PMID:18602799

  13. Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Zhang, Jin; Xu, Hongyan; Zhao, Xueyan; Zheng, Liqiang; Li, Xinwei; Yu, Li

    2006-07-17

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented. PMID:16789041

  14. The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Zhao, Xueyan; Zhang, Jin; Cao, Quan; Zhao, Mingwei; Li, Zhen; Zhang, Gaoyong

    2007-01-01

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions. PMID:17177215

  15. Role of solubilized water in the reverse ionic liquid microemulsion of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Bai, Xiangtao; Yu, Li; Zhao, Xueyan; Zhang, Jin; Zhao, Mingwei; Li, Zhen

    2007-03-15

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) can form nonaqueous microemulsions with benzene by the aid of nonionic surfactant TX-100. The effect of water on ionic liquid-in-oil (IL/O) microemulsions was studied, and it was shown that the addition of small amount of water to the IL microemulsion contributed to the stability of microemulsion and thus increased the amount of solubilized bmimBF4 in the microemulsion. The conductivity measurements also showed that the attractive interactions between IL microdroplets were weakened, that is, the IL/O microemulsion becomes more stable in the present of some water. Fourier transform IR was carried out to analyze the states of the added water, and the result showed that these water molecules mainly behaved as bound water and trapped water, indicating that the water molecules are located in the palisade layers of the IL/O microemulsion. Furthermore, 1H NMR and 19F NMR spectra suggested that the added water molecules built the hydrogen binding network of imidazolium cations and H2O, BF4- anion and H2O, and at the same time the electronegative oxygen atoms of the oxyethylene units of TX-100 and water in the palisade layers, which made the palisade layers more firm and thus increased the stability of the microemulsion. The study can help in further understanding the formation mechanism of microemulsions. In addition, the characteristic solubilization behavior of the added water can provide an aqueous interface film for hydrolysis reactions and therefore may be used as an ideal medium to prepare porous or hollow nanomaterials. PMID:17305388

  16. New solvents designed on the basis of the molecular-microscopic properties of binary mixtures of the type (protic molecular solvent + 1-butyl-3-methylimidazolium-based ionic liquid).

    PubMed

    Fortunato, Graciela G; Mancini, Pedro M; Bravo, M Virginia; Adam, Claudia G

    2010-09-16

    The main purpose of this work is to analyze the microscopic feature of solvent systems resulting from the basis of binary mixtures formed by a protic molecular solvent (methanol, ethanol, propan-1-ol, propan-2-ol, and 2-ethoxyethanol) and a 1-butyl-3-methylimidazolium (bmim)-based ionic liquid (IL) cosolvent composed of different anions (tetrafluoroborate, hexafluorophosphate, chloride, and bromide). At the same time, a complementary aim is to evaluate the incidence of anion type on the solvation pattern. The empirical solvatochromic parameters E(T)(N), π*, β, and α were determined from the UV-vis solvatochromic shifts of adequate probes. The behavior of the solvent systems was analyzed according to their deviation from ideality. E(T)(N) polarity and π* dipolarity/polarizability exhibit positive deviation from ideal behavior in all binary mixtures at the explored compositions. Moreover, E(T)(N) and α parameters display synergetic effects in some binary mixtures composed of tetrafluoroborate and hexafluorophosphate anions. The influence of anion nature on the response patterns is clearly manifested in the basicity β and acidity α of the media. This is connected with the degree and type of interaction between the anions and the 1-butyl-3-methylimidazolium cation. The ion-pair character of the ionic liquids affects their interactions with a solute or a molecular solvent. The application of an appropriate preferential solvation model allowed us to obtain valuable information about solute-solvent and solvent-solvent interactions of the selected ionic liquid mixtures. It is possible to identify relevant mixtures paying particular attention to the most remarkable microscopic properties, the acidity and the basicity, in order to propose "new solvents". Thus, the solvating feature can be tailored selecting the molecular and/or the ionic component at a particular composition. A simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is

  17. NMR study of cation dynamics in three crystalline states of 1-butyl-3-methylimidazolium hexafluorophosphate exhibiting crystal polymorphism.

    PubMed

    Endo, Takatsugu; Murata, Hiroki; Imanari, Mamoru; Mizushima, Noriko; Seki, Hiroko; Nishikawa, Keiko

    2012-03-29

    We investigate the cation rotational dynamics of a room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium hexafluorophosphate ([C(4)mim]PF(6)) in its three crystalline states by (1)H NMR spectroscopy. Spin-lattice and spin-spin relaxation time (T(1) and T(2), respectively) measurements as a function of temperature confirm the presence of three polymorphic crystals of [C(4)mim]PF(6): crystals α, β, and γ, which we previously discovered using Raman spectroscopy and calorimetry. Second moment calculations of (1)H NMR spectra reveal that certain segmental motions of the butyl group in addition to the rapid rotation of the two methyl groups in the cation occur in all the crystals. The trend in the mobility of the segmental motions is γ < β ≤ α, which is consistent with the strength of cation-anion interactions (or crystal packing density) estimated from high-frequency Raman scattering experiments. T(1) measurements demonstrate two types of rotational motions on the nanosecond time scale in all three crystals: fast and slow motions. The three crystals have similar activation energies of 12.5-15.1 kJ mol(-1) for the fast motion, which is assigned to the rotation of the methyl group at the terminal of the butyl group. These observed activation energies were consistent with that estimated by quantum chemical calculations in the gas phase (11.9 kJ mol(-1)). In contrast, the slow motions of crystals α and γ are attributed to different segmental motions of the butyl group and that of crystal β to either a little segmental motion or a certain PF(6)(-) rotational motion. These nanosecond rotational motions obtained from the T(1) measurements do not appear to be affected by crystal packing density because local interactions in the crystalline state rather than packing density govern such nanosecond motions. With respect to the segmental motions, the mobility is likely to change significantly with the conformation of the butyl group. On the basis of these

  18. Solvent and rotational relaxation of Coumarin-153 in a micellar solution of a room-temperature ionic liquid, 1-butyl-3-methylimidazolium octyl sulfate, in ethylammonium nitrate

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Ghatak, Chiranjib; Pramanik, Rajib; Sarkar, Souravi; Sarkar, Nilmoni

    2010-10-01

    We have investigated the micelle formation by room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium octyl sulfate (bmimOs) with another RTIL, ethyl ammonium nitrate (EAN). In addition, the effect of micelle formation on the solvation and rotational relaxation dynamics have been observed using steady-state and picoseconds time-resolved spectroscopy. Both the solvent and rotational relaxations of Coumarin-153 are retarded in the micelle compared to that of neat EAN. The increase in average solvation time on going from neat EAN to bmimOs-EAN micelle is very small compared to the increase in solvation time on going from pure water to water containing micelle.

  19. Experimental and theoretical investigation of multistage extraction of 1,3-propanediol using the extraction system phosphate/1-butyl-3-methylimidazolium trifluoromethanesulfonate/water.

    PubMed

    Müller, Anja; Lutze, Philip; Górak, Andrzej

    2013-01-01

    The separation of 1,3-propanediol from fermentation broth is a challenging and energy-demanding step using conventional unit operations. One alternative process is the use of an aqueous two-phase system incorporating ionic liquids to use synergy effects of both technologies. Within this manuscript, the technical feasibility of the extraction of 1,3-propanediol using the aqueous two-phase system phosphate (salt)/1-butyl-3-methylimidazolium trifluoromethanesulfonate (ionic liquid)/water in a continuously operated process in pilot-scale is presented. The extraction was performed in a multistage mixer-settler unit and successfully modeled with an equilibrium-stage model and correlations to describe the liquid-liquid equilibrium of the salt/ionic liquid/water two-phase system. The developed and validated model was used for a further investigation of the influence of different process parameters in the determined operating window. Theses parameters include the number of stages, the phase ratio, the pH, and the mass fraction of the involved components. The results prove that the phosphate and 1-butyl-3-methylimidazolium trifluoromethanesulfonate mass fraction, the phase ratio, and the number of stages have a considerable influence on the recovery of 1,3-propanediol, whereas the pH value has only a smaller impact. Those results can be used for optimization of the system as well as for targeting future research within this area. PMID:23554391

  20. STRUCTURE AND PROPERTIES OF CORN, RICE, WHEAT AND POTATO STARCH DISPERSED IN THE IONIC LIQUID, 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Ionic liquid has gained industry attention, especially in environmentally friendly green chemistry. Researchers have utilized ionic liquid for dispersing cellulose, but no report using ionic liquid for other polysaccharides. In this study, corn, rice, wheat and potato starches were dispersed in ho...

  1. States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

    PubMed

    Li, Na; Cao, Quan; Gao, Yanan; Zhang, Jin; Zheng, Liqiang; Bai, Xiangtao; Dong, Bin; Li, Zhen; Zhao, Mingwei; Yu, Li

    2007-10-22

    We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions. PMID:17886245

  2. Physical Properties of Ionic Liquids Consisting of the 1-Butyl-3-Methylimidazolium Cation with Various Anions and the Bis(trifluoromethylsulfonyl)imide Anion with Various Cations

    SciTech Connect

    Jin, Hui; O'Hare, Bernie; Dong, Jing; Arzhantsev, Sergei; Baker, Gary A; Wishart, James F.; Benesi, Alan; Maroncelli, Mark

    2008-01-01

    Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.

  3. Rotational diffusion of neutral and charged solutes in 1-butyl-3-methylimidazolium-based ionic liquids: influence of the nature of the anion on solute rotation.

    PubMed

    Karve, Lalita; Dutt, G B

    2012-02-16

    Temperature-dependent fluorescence anisotropies of two organic solutes, 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DMDPP) and rhodamine 110 (R110), have been measured in 1-butyl-3-methylimidazolium ([bmim(+)])-based ionic liquids containing the anions hexafluorophosphate ([PF(6)(-)]), bis(trifluoromethylsulfonyl)imide ([Tf(2)N(-)]), tetrafluoroborate ([BF(4)(-)]), trifluoromethanesulfonate ([TfO(-)]), and nitrate ([NO(3)(-)]). This data has been used in conjunction with the recently published results (Dutt, G. B. J. Phys. Chem. B2010, 114, 8971) for the same solutes in [bmim(+)] tris(pentafluoroethyl)trifluorophosphate ([FAP(-)]) to understand the influence of various anions on solute rotation. The boundary condition parameter C(obs), which has been obtained from the analysis of the data using Stokes-Einstein-Debye hydrodynamic theory, for the neutral solute DMDPP is more or less the same in all the ionic liquids. Moreover, C(obs) values are close to the predictions of slip boundary condition, which indicates that solvent viscosity alone governs the rotation of DMDPP. In contrast, for R110, which experiences specific interactions with the anions of the ionic liquids, the C(obs) values are close to stick hydrodynamics. It has also been noticed that the C(obs) values vary with the nature of the anion and this variation correlates with the hydrogen bond basicities of the anions of the ionic liquids. PMID:22233259

  4. Mechanical exfoliation of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) providing graphene nanoplatelets that exhibit enhanced electrocatalysis

    NASA Astrophysics Data System (ADS)

    Hayes, William Ignatius; Lubarsky, Gennady; Li, Meixian; Papakonstantinou, Pagona

    2014-12-01

    A novel production method for graphene nanoplatelets (GPs) with enhanced electrocatalytic behaviour is presented. GPs show improvement in their oxygen reduction reaction (ORR) catalysis after prolonging the grinding of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6). Nitrogen doping of the GPs has inferred a further increase in ORR. The ORR onset potential, cathodic current magnitude and electron transfer efficiency have all improved as a direct consequence of increasing the graphite grinding duration from 30 min to 4 h. Atomic force microscopy has confirmed a decrease in the GP diameter and height as the grinding increases. Raman spectroscopy indicates a higher level of defects present after prolonging the graphite grinding in BMIM-PF6, most likely a result of the increased edge plane exposure. This increased edge plane appears to promote a higher level of nitrogen incorporation as the graphite grinding duration increases, as confirmed by X-ray photoelectron spectroscopy analysis. The stability of the cathodic current assessed by chronoamperometry analysis is higher for the GP and nitrogen doped graphene nanoplatelet (N-GP) samples than the platinum on carbon black (Pt/C). This study presents a novel process for the production of nitrogen doped graphene nanoplatelets, constituting a strategy for the up-scaled production of electrocatalysts.

  5. Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water.

    PubMed

    Gao, Yanan; Hilfert, Liane; Voigt, Andreas; Sundmacher, Kai

    2008-03-27

    In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition. PMID:18318531

  6. Electrochemical and Thermodynamic Properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) in 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid

    PubMed Central

    Yang, Xiao; He, Ling; Qin, Song; Tao, Guo-Hong; Huang, Ming; Lv, Yi

    2014-01-01

    The electrochemical behavior and thermodynamic properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) were studied in 1-butyl-3-methylimidazolium bromide ionic liquid (BmimBr) at a glassy carbon (GC) electrode in the range of 293–338 K. The electrode reaction of Eu(III) was found to be quasi-reversible by the cyclic voltammetry, the reactions of the other three lanthanide ions were regarded as irreversible systems. An increase of the current intensity was obtained with the temperature increase. At 293 K, the cathodic peak potentials of −0.893 V (Eu(III)), −0.596 V (Sm(III)), −0.637 V (Dy(III)) and −0.641 V (Nd(III)) were found, respectively, to be assigned to the reduction of Ln(III) to Ln(II). The diffusion coefficients (Do), the transfer coefficients (α) of Ln(III) (Ln = Eu, Sm, Dy, Nd) and the charge transfer rate constants (ks) of Eu(III) were estimated. The apparent standard potential (E0*) and the thermodynamic properties of the reduction of Eu(III) to Eu(II) were also investigated. PMID:24752584

  7. Thermodynamic, dynamic, and structural properties of ionic liquids comprised of 1-butyl-3-methylimidazolium cation and nitrate, azide, or dicyanamide anions.

    PubMed

    Bedrov, Dmitry; Borodin, Oleg

    2010-10-14

    Molecular dynamics simulations of ionic liquids (IL) comprised of 1-butyl-3-methylimidazolium [bmim] cation and nitrate [NO(3)], azide [N(3)], or dicyanamide [N(CN)(2)] anions were conducted using the polarizable APPLE&P force field. Comparison of thermodynamic properties such as densities, enthalpies of vaporization, and ion binding energies as well as structural correlations obtained from simulations at atmospheric pressure and temperature range 298-393 K showed that IL with the N(CN)(2) anion shows significantly different characteristics as compared to ILs with the N(3) and NO(3) anions. [bmim][N(CN)(2)] IL was found to have the lowest enthalpy of vaporization and the weakest ion-ion structural correlation as compared to ILs with the other two ions. This trend was further manifested in dynamical properties characterized by self-diffusion coefficients and molecular rotational relaxation times, where IL with the N(CN)(2) anion showed the fastest dynamics as compared to other ILs. We also examine the dynamic correlations between the ions' translational and rotational motions as well as discuss the anisotropy of the latter. PMID:20849137

  8. Liberation of fermentable sugars from soybean hull biomass using ionic liquid 1-butyl-3-methylimidazolium acetate and their bioconversion to ethanol.

    PubMed

    da Cunha-Pereira, Fernanda; Rech, Rosane; Záchia Ayub, Marco Antônio; Pinheiro Dillon, Aldo; Dupont, Jairton

    2016-03-01

    Optimized hydrolysis of lignocellulosic waste biomass is essential to achieve the liberation of sugars to be used in fermentation process. Ionic liquids (ILs), a new class of solvents, have been tested in the pretreatment of cellulosic materials to improve the subsequent enzymatic hydrolysis of the biomass. Optimized application of ILs on biomass is important to advance the use of this technology. In this research, we investigated the effects of using 1-butyl-3-methylimidazolium acetate ([bmim][Ac]) on the decomposition of soybean hull, an abundant cellulosic industrial waste. Reaction aspects of temperature, incubation time, IL concentration, and solid load were optimized before carrying out the enzymatic hydrolysis of this residue to liberate fermentable glucose. Optimal conditions were found to be 75°C, 165 min incubation time, 57% (mass fraction) of [bmim][Ac], and 12.5% solid loading. Pretreated soybean hull lost its crystallinity, which eased enzymatic hydrolysis, confirmed by Fourier Transform Infrared analysis. The enzymatic hydrolysis of the biomass using an enzyme complex from Penicillium echinulatum liberated 92% of glucose from the cellulose matrix. The hydrolysate was free of any toxic compounds, such as hydroxymethylfurfural and furfural. The obtained hydrolysate was tested for fermentation using Candida shehatae HM 52.2, which was able to convert glucose to ethanol at yields of 0.31. These results suggest the possible use of ILs for the pretreatment of some lignocellulosic waste materials, avoiding the formation of toxic compounds, to be used in second-generation ethanol production and other fermentation processes. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:312-320, 2016. PMID:26588200

  9. Temperature-programed time-of-flight secondary ion mass spectrometry study of 1-butyl-3-methylimidazolium trifluoromethanesulfonate during glass-liquid transition, crystallization, melting, and solvation

    SciTech Connect

    Souda, Ryutaro; Guenster, Jens

    2008-09-07

    For this study, time-of-flight secondary ion mass spectrometry was used to analyze the molecular orientation of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([bmim][OTf]) and its interaction with the adsorbed Na and LiI species at temperatures of 150-300 K. A glassy [bmim][OTf] film crystallizes at around 230 K, as observed from the increase in the [bmim]{sup +} yield. LiI and Na adsorbed on the glassy film are solvated, whereas they tend to form islands on a crystalline film. The crystalline surface inertness is ascribable to the termination with the CF{sub 3} and C{sub 4}H{sub 9} groups, whereas the exposure of polar SO{sub 3} and imidazole groups at the glassy film results in the solvation. Surface layering occurs during solvation of LiI on the glassy film in such a way that the [bmim]{sup +} ([OTf]{sup -}) moiety is exposed to the vacuum (oriented to the bulk). The LiI adsorbed on the glassy film is incorporated into the bulk at temperatures higher than 200 K because of the glass-liquid transition. No further uptake of LiI is observed during crystallization, providing a contrast to the results of normal molecular solids such as water and ethanol. The surface layers of the crystal melt at temperatures below the bulk melting point, as confirmed from the dissolution of adsorbed LiI, but the melting layer retains a short-range order similar to the crystal. The [bmim][OTf] can be regarded as a strongly correlated liquid with the combined liquid property and crystal-type local structure. The origin of this behavior is discussed.

  10. Aerosol-OT in water forms fully-branched cylindrical direct micelles in the presence of the ionic liquid 1-butyl-3-methylimidazolium bromide.

    PubMed

    Murgia, Sergio; Palazzo, Gerardo; Mamusa, Marianna; Lampis, Sandrina; Monduzzi, Maura

    2011-05-28

    A recent investigation on the sodium bis(2-ethylhexyl)sulfosuccinate/water/1-butyl-3-methylimidazolium tetrafluoborate (NaAOT/W/bmimBF(4)) system showed that the anionic two-tailed surfactant NaAOT, that is known to form reverse micelles or planar interfaces (typically lamellar liquid crystals), can originate discrete spherical micelles of normal curvature because of strong interactions with the ionic liquid. The goal of the present paper was to detect macro- and microscopic modifications within such a system upon substitution of the ionic liquid's counter-ion tetrafluoroborate with bromide. Firstly, the phase diagram of the NaAOT/water/bmimBr system was determined. Then, the monophasic regions were investigated by means of NMR self-diffusion and SAXRD experiments. The results obtained proved this system to be surprisingly different from that containing bmimBF(4). This study focused mainly on the characterization of the micellar region, which turned out to be constituted of a bicontinuous nanostructure. This finding can be accounted for suggesting a decreasing of the NaAOT effective surfactant packing parameter, as in the case of NaAOT/water/bmimBF(4) system, although the effect in the presence of Br(-) is less pronounced. Data modeling showed the same degree of interfacial adsorption for the bmim(+) cation in both systems, regardless of the particular counterion used-either BF(4)(-) or Br(-). Thus, the remarkable differences between the two systems appear to be mainly due to a specific counterion effect. This result highlights once again the ions specificity, which is found ubiquitously in chemistry and biology. PMID:21468445

  11. Intramolecular Excimer Formation Dynamics of 1,3-Bis-(1-pyrenyl)propane within 1-Butyl-3-methylimidazolium Hexafluorophosphate and Its Polyethylene Glycol Mixtures.

    PubMed

    Yadav, Anita; Kurur, Narayanan D; Pandey, Siddharth

    2015-10-22

    Mixtures of ionic liquid with polyethylene glycol (PEG) have shown interesting features as solubilizing media. Intramolecular excimer formation dynamics of 1,3-bis-(1-pyrenyl)propane [1Py(3)1Py] is investigated within mixtures of a common and popular ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) with PEGs of average molecular weight (MW) 200 (PEG200), average MW 400 (PEG400), number-average MW Mn 570-630 (PEG600), and number-average MW Mn 950-1050 (PEG1000) over the complete composition range at a 10° interval in the temperature range 10-90 °C. Irrespective of the composition of the medium and the temperature, excited-state intensity decay of the excimer fluorescence best fits to a three-exponential decay function, suggesting the presence of one excited-state monomer and two kinetically distinguishable excimers where both excimers are populated simultaneously by the excited monomer with no interconversion between the two excimers. In neat PEGs for temperatures ≤ 50 °C, intensity decay data of monomer fluorescence best fits to a single-exponential decay function, which implies the dissociation of both excimers back to the monomer to be insignificant. As the temperature is increased, the fits become closer to a double-exponential decay function, implying dissociation of one of the excimers to become significant. In neat [bmim][PF6], while a double-exponential decay function is required to fit the monomer excited-state intensity decay data at lower temperatures, three exponentials are required to satisfactorily fit the data at higher temperatures, suggesting both excimers significantly dissociate back to the monomer at higher temperatures within the ionic liquid. Within long-chain PEG-containing ([bmim][PF6] + PEG) mixtures, PEG as opposed to [bmim][PF6] controls the excimer formation dynamics by supposedly wrapping around the excimer, thus hindering dissociation back to the monomer. The overall rate constant of the excimer formation

  12. Solid phase extraction of cadmium on 2-mercaptobenzothiazole loaded on sulfur powder in the medium of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate and cold vapor generation-atomic absorption spectrometric determination.

    PubMed

    Pourreza, N; Ghanemi, K

    2010-06-15

    A novel solid phase extractor for preconcentration of cadmium at ng L(-1) levels has been developed. Cadmium ions were retained on a column packed with sulfur powder modified with 2-mercaptobenzothiazole (2-MBT) in the medium of 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim](+)PF(6)(-)) ionic liquid. The presence of ionic liquid during modification of sulfur enhanced the retention of cadmium ions on the column. The retained cadmium ions were eluted with 2 mol L(-1) solution of HCl and measured by cold vapor generation-atomic absorption spectrometry (CVG-AAS). By using reaction cell-gas liquid separator (RC-GLS), gaseous cadmium vapors were produced and reached the atomic absorption spectrometer, instantaneously. The influence of different variables on both processes of solid phase extraction and CVG-AAS determination of cadmium ions was investigated. The calibration curve was linear in the range of 10-200 ng L(-1)of cadmium in the initial solution with r=0.9992 (n=8) under optimum conditions. The limit of detection based on three times the standard deviation of the blank (3S(b), n=10) was 4.6 ng L(-1). The relative standard deviation (R.S.D.) of 25 and 150 ng L(-1) of cadmium was 4.1 and 2.2% (n=8), respectively. The procedure was validated by the analysis of a certified reference material (DORM-3), water and fish samples. PMID:20176439

  13. Electrochemical reduction of aromatic ketones in 1-butyl-3-methylimidazolium-based ionic liquids in the presence of carbon dioxide: the influence of the ketone substituent and the ionic liquid anion on bulk electrolysis product distribution.

    PubMed

    Zhao, Shu-Feng; Horne, Mike; Bond, Alan M; Zhang, Jie

    2015-07-15

    Electrochemical reduction of aromatic ketones, including acetophenone, benzophenone and 4-phenylbenzophenone, has been undertaken in 1-butyl-3-methylimidazolium-based ionic liquids containing tetrafluoroborate ([BF4](-)), trifluoromethanesulfonate ([TfO](-)) and tris(pentafluoroethyl)trifluorophosphate ([FAP](-)) anions in the presence of carbon dioxide in order to investigate the ketone substituent effect and the influence of the acidic proton on the imidazolium cation (C2-H) on bulk electrolysis product distribution. For acetophenone, the minor products were dimers (<10%) in all ionic liquids, which are the result of acetophenone radical anion coupling. For benzophenone and 4-phenylbenzophenone, no dimers were formed due to steric hindrance. In these cases, even though carboxylic acids were obtained, the main products generated were alcohols (>50%) derived from proton coupled electron transfer reactions involving the electrogenerated radical anions and C2-H. In the cases of both acetophenone and benzophenone, the product distribution is essentially independent of the ionic liquid anion. By contrast, 4-phenylbenzophenone shows a product distribution that is dependent on the ionic liquid anion. Higher yields of carboxylic acids (∼40%) are obtained with [TfO](-) and [FAP](-) anions because in these ionic liquids the C2-H is less acidic, making the formation of alcohol less favourable. In comparison with benzophenone, a higher yield of carboxylic acid (>30% versus ∼15%) was obtained with 4-phenylbenzophenone in all ionic liquids due to the weaker basicity of 4-phenylbenzophenone radical anion. PMID:26136079

  14. Reactions of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We found that starches are found to be soluble at 80 ºC in ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-butyl-3-methylimidazolium dicyanamide (BMIMdca) in concentration up to 10% (w/w). Higher concentrations of biopolymers in these novel solvents resulted in solutions w...

  15. Partitioning of amino acids in the aqueous biphasic system containing the water-miscible ionic liquid 1-butyl-3-methylimidazolium bromide and the water-structuring salt potassium citrate.

    PubMed

    Zafarani-Moattar, Mohammed Taghi; Hamzehzadeh, Sholeh

    2011-07-01

    In biotechnology, extraction by means of aqueous biphasic systems (ABS) is known as a promising tool for the recovery and purification of bio-molecules. Over the past decade, the increasing emphasis on cleaner and environmentally benign extraction procedures has led to enhanced interest in the ABS containing ionic liquids (ILs)-a new class of non-volatile alternative solvents. ABS composed of the hydrophilic IL {1-butyl-3-methylimidazolium bromide ([C4 mim]Br)} and potassium citrate-which is easily degraded-represents a clean media to green separation of bio-molecules. In this regard, here, the extraction capability of this ABS was evaluated through its application to the extraction of some amino acids. To gain an insight into the driving forces of amino acid partitioning in the studied IL-based ABS, the distribution of five model amino acids (L-tryptophan, L-phenylalanine, L-tyrosine, L-leucine, and L-valine) at different aqueous medium pH values and different phase compositions was investigated. The studies indicated that hydrophobic interactions were the main driving force, although electrostatic interactions and salting-out effects were also important for the transfer of the amino acids. Moreover, based on the statistical analysis of the driving forces of amino acid partitioning in the studied IL-based ABS, a model was established to describe the partition coefficient of three model amino acids, L-tryptophan, L-phenylalanine, and L-valine, and employed to predict the partition coefficient of two other model amino acids, L-tyrosine and L-leucine. PMID:21509956

  16. Interaction of ionic liquid with water in ternary microemulsions (Triton X-100/water/1-butyl-3-methylimidazolium hexafluorophosphate) probed by solvent and rotational relaxation of coumarin 153 and coumarin 151.

    PubMed

    Seth, Debabrata; Chakraborty, Anjan; Setua, Palash; Sarkar, Nilmoni

    2006-08-29

    The interaction of ionic liquid with water in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/Triton X-100 (TX-100)/H2O ternary microemulsions, i.e., "[bmim][PF6]-in-water" microregions of the microemulsions, has been studied by the dynamics of solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 151 (C-151). The variation of the time constants of solvent relaxation of C-153 is very small with an increase in the [bmim][PF6]/TX-100 ratio (R). The rotational relaxation time of C-153 also remains unchanged in all micremulsions of different R values. The invariance of solvation and rotational relaxation times of C-153 indicates that the position of C-153 remains unaltered with an increase in R and probably the probe is located at the interfacial region of [bmim][PF6] and TX-100 in the microemulsions. On the other hand, in the case of C-151, with an increase in R the fast component of the solvation time gradually increases and the slow component gradually decreases, although the change in solvation time is small in comparison to that of microemulsions containing common polar solvents such as water, methanol, acetonitrile, etc. The rotational relaxation time of C-151 increases with an increase in R. This indicates that with an increase in the [bmim][PF6] content the number of C-151 molecules in the core of the microemulsions gradually increases. In general, the solvent relaxation time is retarded in this room temperature ionic liquid/water-containing microemulsion compared to that of a neat solvent, although retardation is very small compared to that of the solvent relaxation time of the conventional solvent in the core of the microemulsions. PMID:16922562

  17. Solvent and rotational relaxation of coumarin-153 and coumarin-480 in ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) modified sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) micelle

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Sarkar, Nilmoni

    2013-02-01

    Understanding ion transport dynamics, structure of surfactant aggregates in ionic liquids or ionic liquid/water solutions are quite interesting and potentially important due to widespread applications of surfactant-based systems. In this manuscript we have investigated the effect of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) addition on solvent and rotational relaxation of coumarin-153 (C-153) and coumarin-480 (C-480) in aqueous solution of sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) using steady state and picosecond time resolved fluorescence spectroscopy. The strong adsorption of the bmim+ at the interface and the role of the ionic liquid particularly the cation bmim+ in the modification of the interfacial geometry were probed by the analysis of decay parameters and the rotational relaxation parameters. Since the addition of the NaAOT in water-bmimBF4 mixture above critical micellar concentration (48 mM, obtained from observing pyrene fluorescence) causes strong adsorption of the ionic liquid particularly the cation bmim+, the average solvation time, particularly the slow component increases significantly. More importantly we have found the probe dependent solvation dynamics due to the different location of the probe molecules, C-153 and C-480. C-153 being hydrophobic in nature resides in the stern layer and the adsorption of the bmim+ at the interface modifies stern layer more effectively. So we have observed more pronounced change in solvation dynamics in case of C-153 compared to that in case of C-480. The fluorescence anisotropy decays of the probe molecules were found to be biexponential in nature. The anisotropy decay was interpreted by using a model which consists of the wobbling (rotational) and translational diffusion of the dye coupled with the rotational motion of the micelle as a whole.

  18. Solvent and rotational relaxation of coumarin-153 and coumarin-480 in ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) modified sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) micelle.

    PubMed

    Rao, Vishal Govind; Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Sarkar, Nilmoni

    2013-02-01

    Understanding ion transport dynamics, structure of surfactant aggregates in ionic liquids or ionic liquid/water solutions are quite interesting and potentially important due to widespread applications of surfactant-based systems. In this manuscript we have investigated the effect of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) addition on solvent and rotational relaxation of coumarin-153 (C-153) and coumarin-480 (C-480) in aqueous solution of sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) using steady state and picosecond time resolved fluorescence spectroscopy. The strong adsorption of the bmim(+) at the interface and the role of the ionic liquid particularly the cation bmim(+) in the modification of the interfacial geometry were probed by the analysis of decay parameters and the rotational relaxation parameters. Since the addition of the NaAOT in water-bmimBF(4) mixture above critical micellar concentration (48 mM, obtained from observing pyrene fluorescence) causes strong adsorption of the ionic liquid particularly the cation bmim(+), the average solvation time, particularly the slow component increases significantly. More importantly we have found the probe dependent solvation dynamics due to the different location of the probe molecules, C-153 and C-480. C-153 being hydrophobic in nature resides in the stern layer and the adsorption of the bmim(+) at the interface modifies stern layer more effectively. So we have observed more pronounced change in solvation dynamics in case of C-153 compared to that in case of C-480. The fluorescence anisotropy decays of the probe molecules were found to be biexponential in nature. The anisotropy decay was interpreted by using a model which consists of the wobbling (rotational) and translational diffusion of the dye coupled with the rotational motion of the micelle as a whole. PMID:23220680

  19. Synthesis and characterization of hybrid materials based on 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and Dawson-type tungstophosphate K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O and K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O

    SciTech Connect

    Ammam, Malika; Fransaer, Jan

    2011-04-15

    In this study, we synthesized hybrid materials using well-Dawson polyoxometalates (POMs), K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O or K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF{sub 4}]). K, W, P and CHN elemental analysis showed that one mole of [H{sub 4}PW{sub 18}O{sub 62}]{sup 7-} reacts with 6 moles of BMIM{sup +} and one mole of [P{sub 2}W{sub 18}O{sub 62}]{sup 6-} reacts with 4 moles of BMIM{sup +} to form, respectively, K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. X-ray diffraction illustrated amorphous structure of the hybrid materials. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid materials compared to the parents Dawson POMs. Cyclic voltammetry showed that the reduction peak potentials of the Dawson anion in the hybrid materials shift towards negative values and the shift is more pronounced for K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} compared to K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. This was attributed to a decrease in the acidity of the Dawson POM anion in the hybrid material. -- Graphical abstract: Powder XRD patterns of (a) PW{sub 18}, (b) K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}, (c) P{sub 2}W{sub 18}, and (d) K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. Display Omitted Research highlights: {yields} 1-butyl-3-methylimidazolium tetrafluoroborate([BMIM][BF{sub 4}]) reacts with K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O to form K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}. {yields} [BMIM][BF{sub 4}] reacts with K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O to form K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} displayed amorphous structures. {yields} K

  20. Properties of an ionic liquid-tolerant Bacillus amyloliquefaciens CMW1 and its extracellular protease.

    PubMed

    Kurata, Atsushi; Senoo, Humiya; Ikeda, Yasuyuki; Kaida, Hideaki; Matsuhara, Chiaki; Kishimoto, Noriaki

    2016-07-01

    An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF3SO3) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF3SO3). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF3SO3, [BMIM]Cl, [BMIM]CF3SO3, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0-12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents. PMID:27142029

  1. Distribution of 1-Butyl-3-methylimidazolium Bistrifluoromethylsulfonimide in Mesoporous Silica as a Function of Pore Filling

    SciTech Connect

    Han, Kee Sung; Wang, Xiqing; Hagaman, Edward {Ed} W; Dai, Sheng

    2013-01-01

    Rotational dynamics of the ionic liquid (IL) 1-butyl-3-methlyimidazolium bistrifluoromethylsulfonimide, [C4mim][Tf2N], 1, as a neat liquid and confined in mesoporous silica were investigated by 1H spin-spin (T2) and spin-lattice (T1) relaxation measurements and 13C NMR spectroscopy. Translational dynamics (self-diffusion) were monitored via the diffusion coefficient, D, obtained with 1H pulsed field gradient NMR measurements. These data were used to determine the distribution of 1 in the pores of KIT-6, a mesoporous silica with a bicontinuous gyroid pore structure, as a function of filling fraction. Relaxation studies performed as a function of filling factor and temperature, reveal a dynamic heterogeneity in both translational and rotational motions for 1 at filling factors, f, = 0.2-1.0 (f = 1 corresponds to fully filled pores). Spin-lattice and spin-spin relaxation times reveal the motion of 1 in silica mesopores conform to that expected for a two-dimensional relaxation model. The relaxation dynamics are interpreted using a two-state, fast exchange model for all motions; a slow rotation (and translation) of molecules in contact with the surface and a faster motion approximated by the values for bulk relaxation and diffusion. 1 retains liquid like behavior at all filling factors and temperatures that extend to ca. 50 degrees below the bulk melting point. Translational motion in these systems, interpreted with MD-simulated diffusivity limits, confirms the high propensity of 1 to form a monolayer film on the silica surface at low filling factors.. The attractive interaction of 1 with the surface is greater than that for self-association of 1. The trends in diffusion data at short and long diffusion time suggest that the population of surface-bound 1 is in intimate contact with 1 in the pores. This condition is most easily met at higher filling fractions with successive additions of 1 increasing the layer thickness built up on the surface layer.

  2. Spontaneous encapsulation behavior of ionic liquid into carbon nanotube.

    PubMed

    Jiang, Yanyan; Zhang, Kun; Li, Hui; He, Yezeng; Song, Xigui

    2012-11-21

    Molecular dynamics simulations and density functional theory have been performed to investigate the spontaneous encapsulation of 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) into single-walled carbon nanotubes (SWCNTs). This phenomenon can be attributed to the van der Waals attractive force, hydrogen bonds and especially the π-π stacking effect. The [Bmim][Cl] molecules enter SWCNTs with larger diameters more rapidly, showing an interesting dependence on tube size. A high temperature is not beneficial to, and may even disrupt, the encapsulation of the [Bmim][Cl] molecules. It is also worth noting that the graphene nanoribbon entering the SWCNT would have an extremely different effect on this encapsulation process from when they wrap around the outer surface. Furthermore, the [Bmim][Cl] molecules can assist water transport in the SWCNT by expelling water molecules from the SWCNT. The proposed discoveries eventually provide a powerful way to fabricate nanoscale materials and devices and tune their properties. PMID:23051856

  3. CRYSTAL POLYMORPHISM IN 1-BUTYL-3-METHYLIMIDAZOLIUM HALIDES: SUPPORTING IONIC LIQUID FORMATION THROUGH INHIBITION OF CRYSTALLIZATION. (R828257)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  4. Ionic liquid 1-butyl-3-methylimidazolium cyanamide (bmim [dca]) as a solvent and catalyst for acylation of maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have found a novel method to prepare maltodextrin stearate with DS upto 0.60 in 90% yields from maltodextrin in IL bmim[dca] reacted with vinyl stearate or stearic acid. In this work we have demonstrated that IL could simultaneously act as a solvent and as a catalyst for reaction of maltodextrin...

  5. Microwave-assisted rapid conversion of carbohydrates into 5-hydroxymethylfurfural by ScCl3 in ionic liquids.

    PubMed

    Zhou, Xuanmu; Zhang, Zehui; Liu, Bing; Xu, Zheng; Deng, Kejian

    2013-06-28

    In this study, synthesis of HMF from carbohydrates was carried out in ionic liquids 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) catalyzed by ScCl3 under microwave irradiation. Under the optimal reaction conditions, HMF was obtained in a high yield of 73.4% in 2 mins with the microwave power at 400 W. Compared with the conventional oil-bath heating manner, the use of microwave irradiation not only reduced reaction times from hours to minutes, but also improved HMF yield. This catalytic system could be reused several times without losing its catalytic activity. This efficient catalytic system will generate a promising application strategy for biomass transformation. PMID:23694706

  6. A metallacage encapsulating chloride as a probe for a solvation scale in ionic liquids.

    PubMed

    Daguenet, Corinne; Dyson, Paul J

    2007-01-22

    With the purpose of assessing the reactivity of chloride ions dissolved in ionic liquids (ILs), a relative scale for the solvation of chloride is given for a series of ILs based on the bis(trifluoromethane)sulfonimide ([Tf(2)N]) anion and different cations, 1-butyl-3-methylimidazolium ([bmim]), 1-butyl-2,3-dimethylimidazolium ([bdmim]), 1-butyl-1-methylpyrrolidinium ([bmpy]), 1-butylpyridinium ([bpy]), 1-pentyl-1,1,1-triethylammonium ([C(5)e(3)am]), and 1-(2-hydroxy)ethyl-3-methylimidazolium ([mimeOH]). Insights into the solvation of chloride are achieved by the thermodynamic study of the reaction of dissociation of a chloride-templated nickel(II) metallacage performed at various temperatures by UV-visible spectroscopy in each IL. The order of chloride solvation [C(5)e(3)am][Tf(2)N] < [bmpy][Tf(2)N] < [bmim][Tf(2)N]

  7. Synergistic effects of surfactant-assisted ionic liquid pretreatment rice straw.

    PubMed

    Chang, Ken-Lin; Chen, Xi-Mei; Han, Ye-Ju; Wang, Xiao-Qin; Potprommanee, Laddawan; Ning, Xun-An; Liu, Jing-Yong; Sun, Jian; Peng, Yen-Ping; Sun, Shui-Yu; Lin, Yuan-Chung

    2016-08-01

    The aim of this work was to study an environmentally friendly method for pretreating rice straw by using 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) as an ionic liquid (IL) assisted by surfactants. Different temperatures, reaction times, and surfactant concentrations were studied. Compared with [BMIM]Cl only pretreatment, the addition of 1% sodium dodecyl sulfate (SDS) and 1% cetyl trimethyl ammonium bromide (CTAB) increased lignin removal to 49.48% and 34.76%, respectively. Untreated and pretreated rice straw was thoroughly characterized through FTIR, XRD, and FE-SEM. Cellulose crystallinity and surface morphology of the rice straw were substantially altered after surfactant-assisted IL pretreatment. In conclusion, surfactant-assisted IL pretreatment is an effective method for producing fermentable sugars from lignocellulosic substrates. PMID:27155265

  8. Choline chloride-thiourea, a deep eutectic solvent for the production of chitin nanofibers.

    PubMed

    Mukesh, Chandrakant; Mondal, Dibyendu; Sharma, Mukesh; Prasad, Kamalesh

    2014-03-15

    Deep eutectic solvents (DESs) consisting of the mixtures of choline halide (chloride/bromide)-urea and choline chloride-thiourea were used as solvents to prepare α-chitin nanofibers (CNFs). CNFs of diameter 20-30 nm could be obtained using the DESs comprising of the mixture of choline chloride and thiourea (CCT 1:2); however, NFs could not be obtained using the DESs having urea (CCU 1:2) as hydrogen bond donor. The physicochemical properties of thus obtained NFs were compared with those obtained using a couple of imidazolium based ionic liquids namely, 1-butyl-3-methylimidazolium hydrogen sulphate [(Bmim)HSO4] and 1-methylimidazolium hydrogen sulphate [(Hmim)HSO4] as well as choline based bio-ILs namely, choline hydrogen sulphate [(Chol)HSO4] and choline acrylate. The CNFs obtained using the DES as a solvent were used to prepare calcium alginate bio-nanocomposite gel beads having enhanced elasticity in comparison to Ca-alginate beads. The bio-nanocomposite gel beads thus obtained were used to study slow release of 5-fluorouracil, an anticancer drug. PMID:24528755

  9. Alkylation of Methyl Linoleate with Propene in Ionic Liquids in the Presence of Metal Salts.

    PubMed

    Pomelli, Christian Silvio; Ghilardi, Tiziana; Chiappe, Cinzia; de Angelis, Alberto Renato; Calemma, Vincenzo

    2015-01-01

    Vegetable oils and fatty acid esters are suitable precursor molecules for the production of a variety of bio-based products and materials, such as paints and coatings, plastics, soaps, lubricants, cosmetics, pharmaceuticals, printing inks, surfactants, and biofuels. Here, we report the possibility of using Lewis acidic ionic liquids (ILs) to obtain polyunsaturated ester dimerization-oligomerization and/or, in the presence of another terminal alkene (propene), co-polymerization. In particular, we have tested the Lewis acidic mixtures arising from the addition of a proper amount of GaCl₃ (Χ > 0.5) to two chloride-based (1-butyl-3-methylimidazolium chloride, [bmim]Cl, and 1-butylisoquinolium chloride, [BuIsoq]Cl) or by dissolution of a smaller amount of Al(Tf₂N)₃ (Χ = 0.1) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][Tf₂N]. On the basis of product distribution studies, [bmim][Tf₂N]/Al(Tf₂N)₃ appears the most suitable medium in which methyl linoleate alkylation with propene can compete with methyl linoleate or propene oligomerization. PMID:26690107

  10. Water Nanocluster Formation in the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate ([C4mim][BF4])-D2O Mixtures.

    PubMed

    Gao, Jingsi; Wagner, Norman J

    2016-05-24

    The microstructure of mixtures of deuterated water in the ionic liquid [C4mim][BF4] is investigated by small-angle neutron scattering (SANS) measurement. In the salt-rich region, water dissolves in the ionic liquid up to 0.7 mole fraction, whereupon distinct, nanometer-sized water clusters are observed. These water nanoclusters increase in size with increasing water addition while the mole ratio of water dissolved into the ionic liquid nanostructure increases from 2 to 4. These results provide direct confirmation for recent simulations as well insight into the source of nonidealities in some thermophysical and transport properties (e.g., density and viscosity) of salt-rich aqueous mixtures reported in the literature. PMID:27152941

  11. The importance of ion size and electrode curvature on electrical double layers in ionic liquids

    SciTech Connect

    Feng, G.; Qiao, R.; Huang, J; Dai, S.; Sumpter, B. G.; Meunier, V.

    2011-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF{sub 6}], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF{sub 6}] (near the positive electrode) ≈ [BMIM][Cl] (near the negative electrode) ≈ [BMIM][PF{sub 6}] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a “Multiple Ion Layers with Overscreening” (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  12. The Importance of Ion Size and Electrode Curvature on Electrical Double Layers in Ionic Liquids

    SciTech Connect

    Feng, Guang; Qiao, Rui; Huang, Jingsong; Dai, Sheng; Sumpter, Bobby G; Meunier, Vincent

    2010-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF(6)] (near the positive electrode) {approx} [BMIM][Cl] (near the negative electrode) {approx} [BMIM][PF(6)] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a 'Multiple Ion Layers with Overscreening' (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  13. Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production.

    PubMed

    Wahidin, Suzana; Idris, Ani; Shaleh, Sitti Raehanah Muhamad

    2016-04-01

    The wet biomass microalgae of Nannochloropsis sp. was converted to biodiesel using direct transesterification (DT) by microwave technique and ionic liquid (IL) as the green solvent. Three different ionic liquids; 1-butyl-3-metyhlimidazolium chloride ([BMIM][Cl], 1-ethyl-3-methylimmidazolium methyl sulphate [EMIM][MeSO4] and 1-butyl-3-methylimidazolium trifluoromethane sulfonate [BMIM][CF3SO3]) and organic solvents (hexane and methanol) were used as co-solvents under microwave irradiation and their performances in terms of percentage disruption, cell walls ruptured and biodiesel yields were compared at different reaction times (5, 10 and 15 min). [EMIM][MeSO4] showed highest percentage cell disruption (99.73%) and biodiesel yield (36.79% per dried biomass) after 15 min of simultaneous reaction. The results demonstrated that simultaneous extraction-transesterification using ILs and microwave irradiation is a potential alternative method for biodiesel production. PMID:26851899

  14. Thermodynamical and structural properties of binary mixtures of imidazolium chloride ionic liquids and alcohols from molecular simulation

    NASA Astrophysics Data System (ADS)

    Raabe, Gabriele; Köhler, Jürgen

    2008-10-01

    We have performed molecular dynamics simulations to determine the densities, excess energies of mixing, and structural properties of binary mixtures of the 1-alkyl-3-methylimidazolium chloride ionic liquids (ILs) [amim][Cl] and ethanol and 1-propanol in the temperature range from 298.15to363.15K. As in our previous work [J. Chem. Phys. 128, 154509 (2008)], our simulation studies are based on a united atom model from Liu et al. [Phys. Chem. Chem. Phys. 8, 1096 (2006)] for the 1-ethyl- and 1-butyl-3-methylimidazolium cations [emim+] and [bmim+], which we have extended to the 1-hexyl-3-methylimidazolium [hmim+] cation and combined with parameters of Canongia Lopes et al. [J. Phys. Chem. B 108, 2038 (2004)] for the chloride anion [Cl-] and the force field by Khare et al. for the alcohols [J. Phys. Chem. B 108, 10071 (2004)]. With this, we provide both prediction for the densities of the mixtures that have mostly not been investigated experimentally yet and a molecular picture of the interactions between the alcohol molecules and the ions. The negative excess energies of all mixtures indicate an energetically favorable mixing of [amim][Cl] ILs and alcohols. To gain insight into the nonideality of the mixtures on the molecular level, we analyzed their local structures by radial and spatial distribution functions. These analyses show that the local ordering in these mixtures is determined by strong hydrogen-bond interactions between the chloride anion and the hydroxyls of the alcohols, enhanced interactions between the anion and the charged domain of the cation, and an increasing aggregation of the nonpolar alkyl tails of the alcohols and the cations with increasing cation size, which results in a segregation of polar and nonpolar domains.

  15. Dissolving process of a cellulose bunch in ionic liquids: a molecular dynamics study.

    PubMed

    Li, Yao; Liu, Xiaomin; Zhang, Suojiang; Yao, Yingying; Yao, Xiaoqian; Xu, Junli; Lu, Xingmei

    2015-07-21

    In recent years, a variety of ionic liquids (ILs) were found to be capable of dissolving cellulose and mechanistic studies were also reported. However, there is still a lack of detailed information at the molecular level. Here, long time molecular dynamics simulations of cellulose bunch in 1-ethyl-3-methylimidazolium acetate (EmimAc), 1-ethyl-3-methylimidazolium chloride (EmimCl), 1-butyl-3-methylimidazolium chloride (BmimCl) and water were performed to analyze the inherent interaction and dissolving mechanism. Complete dissolution of the cellulose bunch was observed in EmimAc, while little change took place in EmimCl and BmimCl, and nothing significant happened in water. The deconstruction of the hydrogen bond (H-bond) network in cellulose was found and analyzed quantitatively. The synergistic effect of cations and anions was revealed by analyzing the whole dissolving process. Initially, cations bind to the side face of the cellulose bunch and anions insert into the cellulose strands to form H-bonds with hydroxyl groups. Then cations start to intercalate into cellulose chains due to their strong electrostatic interaction with the entered anions. The H-bonds formed by Cl(-) cannot effectively separate the cellulose chain and that is the reason why EmimCl and BmimCl dissolve cellulose more slowly. These findings deepen people's understanding on how ILs dissolve cellulose and would be helpful for designing new efficient ILs to dissolve cellulose. PMID:26095890

  16. Evaluation of thermophysical properties of ionic liquids with polar solvent: a comparable study of two families of ionic liquids with various ions.

    PubMed

    Govinda, Varadhi; Attri, Pankaj; Venkatesu, Punnuru; Venkateswarlu, Ponneri

    2013-10-17

    In this work, we explore and compare the role of the ion effect on the thermophysical properties of two families of ionic liquids (ILs), namely, tetra-alkyl ammonium cation [R4N](+) with hydroxide [OH](-) anion and 1-alkyl-3-methyl imidazolium cation [amim](+) with different anions (chloride, methyl sulfate, and tetrafluoroborate), with polar solvent such as dimethylsulfoxide (DMSO) in the temperature range from 25 to 40 °C and over the whole concentration range of ILs. Two families of ILs, namely, tetramethyl ammonium hydroxide [(CH3)4N][OH] (TMAH), tetraethyl ammonium hydroxide [(C2H5)4N][OH] (TEAH), tetrapropyl ammonium hydroxide [(C3H7)4N][OH] (TPAH), and tetrabutyl ammonium hydroxide [(C4H9)4N][OH] (TBAH) from ammonium-based ILs and 1-ethyl-3-methylimidazolium chloride [Emim][Cl], 1-ethyl-3-methylimidazolium methylsulfate [Emim][MeSO4], 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF4], and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) from imidazolium family of ILs, are used in the present study. To address the molecular interactions of ILs with DMSO, densities (ρ), ultrasonic sound velocities (u), and viscosities (η) have been measured over the entire composition range and at four temperatures, 25, 30, 35, and 40 °C, under atmospheric pressure. From these experimental data, the excess molar volume (V(E)), the deviation in isentropic compressibility (Δκs), and the deviation in viscosity (Δη) were calculated and were adequately correlated by using the Redlich-Kister polynomial equation. The measured and predicted data were interpreted on the basis of intermolecular interactions and structural effects between like and unlike molecules upon mixing. The hydrogen-bonding features between ammonium-based ILs and DMSO were analyzed using molecular modeling program by HyperChem 7. PMID:24087984

  17. The solvation structures of cellulose microfibrils in ionic liquids

    SciTech Connect

    Mostofian, Barmak; Smith, Jeremy C; Cheng, Xiaolin

    2011-01-01

    The use of ionic liquids for non-derivatized cellulose dissolution promises an alternative method for the thermochemical pretreatment of biomass that may be more efficient and environmentally acceptable than more conventional techniques in aqueous solution. Here, we performed equilibrium MD simulations of a cellulose microfibril in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) and compared the solute structure and the solute-solvent interactions at the interface with those from corresponding simulations in water. The results indicate a higher occurrence of solvent-exposed orientations of cellulose surface hydroxymethyl groups in BmimCl than in water. Moreover, spatial and radial distribution functions indicate that hydrophilic surfaces are a preferred site of interaction between cellulose and the ionic liquid. In particular, hydroxymethyl groups on the hydrophilic fiber surface adopt a different conformation from their counterparts oriented towards the fiber s core. Furthermore, the glucose units with these solvent-oriented hydroxymethyls are surrounded by the heterocyclic organic cation in a preferred parallel orientation, suggesting a direct and distinct interaction scheme between cellulose and BmimCl.

  18. Conversion of xylan, d-xylose and lignocellulosic biomass into furfural using AlCl3 as catalyst in ionic liquid.

    PubMed

    Zhang, Luxin; Yu, Hongbing; Wang, Pan; Dong, Heng; Peng, Xinhong

    2013-02-01

    In order to define a new green catalytic pathway for the production of furfural, the catalyzed conversion of xylan into furfural in 1-butyl-3-methylimidazolium chloride was studied by using mineral acids and metal chlorides as catalysts under microwave irradiation. Amongst these catalysts, AlCl(3) resulted in the highest furfural yield of 84.8% at 170°C for 10s. The effect of AlCl(3) on the conversion efficiency of d-xylose and untreated lignocellulosic biomass was also investigated, the yields of furfural from corncob, grass and pine wood catalyzed by AlCl(3) in [BMIM]Cl were in the range of 16-33%. [BMIM]Cl and AlCl(3) could be recycled for four runs with stable catalytic activity. AlCl(3) is less corrosive than mineral acids, and the use of ionic liquid as reaction medium will no longer generate toxic wastewater, thus this reaction system is more ecologically viable. PMID:23306118

  19. Catalytic hydrolysis of lignocellulosic biomass into 5-hydroxymethylfurfural in ionic liquid.

    PubMed

    Wang, Pan; Yu, Hongbing; Zhan, Sihui; Wang, Shengqiang

    2011-03-01

    Production of 5-hydroxymethylfurfural (HMF) from cellulose catalyzed by solid acids and metal chlorides was studied in the 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) under microwave irradiation. Among the applied catalysts, the use of CrCl(3)/LiCl resulted in the highest yield of HMF. The effects of catalyst dosage (mole ratio of catalyst to glucose units in the feedstock) and reaction temperature on HMF yields were investigated to obtain optimal process conditions. With the 1:1 mol ratio of catalyst to glucose unit, the HMF yield reached 62.3% at 160°C for 10 min. Untreated wheat straw was also investigated as feedstock to produce HMF for the practical use of raw biomass, in which the HMF yield was comparable to that from pure cellulose. After the extraction of HMF, [BMIM]Cl and CrCl(3)/LiCl could be reused and exhibited no activity loss after three successive runs. PMID:21232942

  20. Electrochemistry of Iodide, Iodine, and Iodine Monochloride in Chloride Containing Nonhaloaluminate Ionic Liquids.

    PubMed

    Bentley, Cameron L; Bond, Alan M; Hollenkamp, Anthony F; Mahon, Peter J; Zhang, Jie

    2016-02-01

    The electrochemical behavior of iodine remains a contemporary research interest due to the integral role of the I(-)/I3(-) couple in dye-sensitized solar cell technology. The neutral (I2) and positive (I(+)) oxidation states of iodine are known to be strongly electrophilic, and thus the I(-)/I2/I(+) redox processes are sensitive to the presence of nucleophilic chloride or bromide, which are both commonly present as impurities in nonhaloaluminate room temperature ionic liquids (ILs). In this study, the electrochemistry of I(-), I2, and ICl has been investigated by cyclic voltammetry at a platinum macrodisk electrode in a binary IL mixture composed of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C2mim][NTf2]). In the absence of chloride (e.g., in neat [C2mim][NTf2]), I(-) is oxidized in an overall one electron per iodide ion process to I2 via an I3(-) intermediate, giving rise to two resolved I(-)/I3(-) and I3(-)/I2 processes, as per previous reports. In the presence of low concentrations of chloride ([Cl(-)] and [I(-)] are both <30 mM), an additional oxidation process appears at potentials less positive than the I3(-)/I2 process, which corresponds to the oxidation of I3(-) to the interhalide complex anion [ICl2](-), in an overall two electron per iodide ion process. In the presence of a large excess of Cl(-) ([I(-)] ≈ 10 mM and [Cl(-)] ≈ 3.7 M), I(-) is oxidized in an overall two electron per iodide ion process to [ICl2](-) via an [I2Cl](-) intermediate (confirmed by investigating the voltammetric response of ICl and I2 under these conditions). In summary, the I(-)/I2/I(+) processes in nonhaloaluminate ILs involve a complicated interplay between multiple electron transfer pathways and homogeneous chemical reactions which may not be at equilibrium on the voltammetric time scale. PMID:26708364

  1. Morphology- and facet-controlled synthesis of CuO micro/nanomaterials and analysis of their lithium ion storage properties

    NASA Astrophysics Data System (ADS)

    Liu, Xiaodi; Liu, Guangyin; Wang, Lijuan; Li, Yinping; Ma, Yupei; Ma, Jianmin

    2016-04-01

    Hierarchical CuO architectures and monodisperse CuO nanoplates are synthesized via a hydrothermal method with the assistance of ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The products are characterized by XRD, SEM, TEM, HRTEM, BET, and XPS, and the results indicate that the CuO architectures are composed of nanosheets with exposed (001) facets and the CuO nanoplates are single crystals enclosed by (200) facets. More specially, it is found that [Bmim]Cl serves as an effective template for the synthesis of CuO nanoplates by adsorbing on the (200) planes of monoclinic CuO. When evaluated as anode materials for lithium-ion batteries, CuO architectures possess higher discharge capacity, better cycling stability, and better rate capability than CuO nanoplates. The initial discharge capacity of CuO architectures is 1096 mAh g-1 at a rate of 0.5 C, whereas CuO nanoplates exhibit a lower capacity of 878.4 mAh g-1. Moreover, after 50 cycles, CuO architectures and CuO nanoplates can deliver discharge capacities of 465.6 and 281.6 mAh g-1, respectively.

  2. Catalytic conversion of carbohydrates into 5-hydroxymethylfurfural over cellulose-derived carbonaceous catalyst in ionic liquid.

    PubMed

    Hu, Lei; Zhao, Geng; Tang, Xing; Wu, Zhen; Xu, Jiaxing; Lin, Lu; Liu, Shijie

    2013-11-01

    Three environmental-benign and low-cost carbon-based solid acid catalysts containing -SO3H, -COOH and phenolic -OH groups were prepared and used for the conversion of glucose into 5-hydroxymethylfurfural (HMF) in ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM]Cl). The results demonstrated that cellulose-derived carbonaceous catalyst (CCC) possessed the highest catalytic activity, which resulted in 46.4% HMF yield at 160°C for only 15 min. In addition, the reaction kinetics for the conversion of glucose into HMF over CCC was fitted with the first-order rate equation. The slightly-deactivated CCC after four successive reaction runs could be easily regenerated by a simple carbonization and sulfonation process. More gratifyingly, the combination of CCC and [BMIM]Cl were confirmed to be suitable for converting other carbohydrates such as fructose, sucrose, maltose, cellobiose, starch and cellulose into HMF. Particularly, a plausible mechanism involving hydrolysis, isomerization and dehydration for the conversion of carbohydrates into HMF was also proposed. PMID:24090810

  3. Abnormal Viscosity Behaviour of Ionic Liquid 1-n-Butyl-3-methylimidazolium Chloride

    NASA Astrophysics Data System (ADS)

    Takada, Akihiko; Imaichi, Kenta; Takahashi, Yoshiaki

    2008-07-01

    Effect of adding an inorganic salt, lithium chloride, and water on viscosity of an ionic liquid, 1-n-butyl-3-methylimidazolium chloride (BmimCl), was investigated by shear stress measurements with a rheometer. Shear rate dependence of viscosity showed shear thinning behaviour, which implies that some structure should exist in the liquid and the structure should change at high shear rates. Addition of LiCl enhances the viscosity of BmimCl. The logarithmic value of zero shear viscosity, η0, of BmimCl increases linearly and largely with increasing the added salt contents. The increasing rate of the viscosity by addition of LiCl was about ten times larger than that for aqueous solution of LiCl. When water is added into BmimCl, viscosity decreased. The increasing rate of the viscosity by addition of LiCl for BmimCl with about 5 wt% of water was almost the same as that for BmimCl without addition of water.

  4. The Overriding Roles of Concentration and Hydrophobic Effect on Structure and Stability of Heme Protein Induced by Imidazolium-Based Ionic Liquids.

    PubMed

    Jha, Indrani; Kumar, Awanish; Venkatesu, Pannuru

    2015-07-01

    Spectroscopic and molecular docking investigations were carried out to characterize the effect of imidazolium-based ionic liquids (ILs) with varying chain length of the cation on the thermal stability as well as spectroscopic behavior of heme protein hemoglobin (Hb). The goal of this work is to investigate the role of concentration of ILs, the effect of alkyl chain length of the cation, and the related Hofmeister series on the structure of Hb. To achieve this goal, a series of ILs possessing same Cl(-) anion and a set of cation [Cnmim](+) with increasing chain length such as 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]), 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), 1-hexyl-3-methylimidazolium chloride ([Hmim][Cl]), and 1-decyl-3-methylimidazolium chloride ([Dmim][Cl]) were used in this study. It was observed that the stability of the protein was concentration dependent as well as the hydrophobic interactions between [Cnmim](+) of ILs, and the amino acid residues in the protein played a major role in protein unfolding. As a consequence, the destabilization tendency of the ILs toward the Hb increases with increasing chain length of the cation of ILs. Additionally, the cations of the ILs obeyed the Hofmeister series when arranged in the order of providing stability to Hb structure. PMID:26069954

  5. A study of the acid-catalyzed hydrolysis of cellulose dissolved in ionic liquids and the factors influencing the dehydration of glucose and the formation of humins.

    PubMed

    Dee, Sean J; Bell, Alexis T

    2011-08-22

    An investigation was carried out into the hydrolysis of cellulose dissolved in 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]) and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) catalyzed by mineral acids. Glucose, cellobiose, and 5-hydroxymethylfurfural (5-HMF) were observed as the primary reaction products. The initial rate of glucose formation was determined to be of first order in the concentrations of dissolved glucan and protons and of zero order in the concentration of water. The absence of a dependence on water concentration suggests that cleavage of the β-1,4-glycosidic linkages near chain ends is irreversible. The apparent activation energy for glucose formation is 96 kJ mol(-1). The absence of oligosaccharides longer than cellobiose suggests that cleavage of interior glycosidic bonds is reversible due to the slow diffusional separation of cleaved chains in the highly viscous glucan/ionic liquid solution. Progressive addition of water during the course of glucan hydrolysis inhibited the rate of glucose dehydration to 5-HMF and the formation of humins. The inhibition of glucose dehydration is attributed to stronger interaction of protons with water than the 2-OH atom of the pyranose ring of glucose, the critical step in the proposed mechanism for the formation of 5-HMF. The reduction in humin formation associated with water addition is ascribed to the lowered concentration of 5-HMF, since the formation of humins is suggested to proceed through the condensation polymerization of 5-HMF with glucose. PMID:21809450

  6. Comparison of different ionic liquids pretreatment for corn stover enzymatic saccharification.

    PubMed

    Mood, Sohrab Haghighi; Golfeshan, Amir Hossein; Tabatabaei, Meisam; Abbasalizadeh, Saeed; Ardjmand, Mehdi; Jouzani, Gholamreza Salehi

    2014-01-01

    Recently, application of ionic liquids (ILs) has received much attention due to their special solvency properties as a promising method of pretreatment for lignocellulosic biomass. Easy recovery of ionic liquids, chemical stability, temperature stability, nonflammability, low vapor pressure, and wide liquidus range are among those unique properties. These solvents are also known as green solvents due to their low vapor pressure. The present study was set to compare the effect of five different ILs, namely, 1-ethyl-3-methylimidazolium acetate ([EMIM][Ac]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), 1-ethyl-3-methyl imidazolium diethyl phosphate ([EMIM][DEP]), 1-allyl-3-methylimidazolium chloride ([AMIM][Cl]), and 1-ethyl-3-methylimidazolium-hydrogen sulfate ([EMIM][HSO₄]), on corn stover in a bioethanol production process. The performance of ILs was evaluated based on the change observed in chemical structure, crystallinity index, cellulose digestibility, and glucose release. Overall, [EMIM][Ac]-pretreated corn stover led to significantly higher saccharification, with cellulose digestibility reaching 69% after 72 hr, whereas digestibility of untreated barley straw was measured at only 21%. PMID:24397717

  7. Modulation of cellulase activity by charged lipid bilayers with different acyl chain properties for efficient hydrolysis of ionic liquid-pretreated cellulose.

    PubMed

    Mihono, Kai; Ohtsu, Takeshi; Ohtani, Mai; Yoshimoto, Makoto; Kamimura, Akio

    2016-10-01

    The stability of cellulase activity in the presence of ionic liquids (ILs) is critical for the enzymatic hydrolysis of insoluble cellulose pretreated with ILs. In this work, cellulase was incorporated in the liposomes composed of negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) and zwitterionic phosphatidylcholines (PCs) with different length and degree of unsaturation of the acyl chains. The liposomal cellulase-catalyzed reaction was performed at 45°C in the acetate buffer solution (pH 4.8) with 2.0g/L CC31 as cellulosic substrate. The crystallinity of CC31 was reduced by treating with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at 120°C for 30min. The liposomal cellulase continuously catalyzed hydrolysis of the pretreated CC31 for 48h producing glucose in the presence of 15wt% [Bmim]Cl. The charged lipid membranes were interactive with [Bmim](+), as elucidated by the [Bmim]Cl-induced alterations in fluorescence polarization of the membrane-embedded 1,6-diphenyl-1,3,5-hexatriene (DPH) molecules. The charged membranes offered the microenvironment where inhibitory effects of [Bmim]Cl on the cellulase activity was relieved. The maximum glucose productivity GP of 10.8 mmol-glucose/(hmol-lipid) was obtained at the reaction time of 48h with the cellulase incorporated in the liposomes ([lipid]=5.0mM) composed of 50mol% POPG and 1,2-dilauroyl-sn-glycero-3-phosohocholine (DLPC) with relatively short and saturated acyl chains. PMID:27318965

  8. Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model.

    PubMed

    Lantz, Andrew W; Pino, Verónica; Anderson, Jared L; Armstrong, Daniel W

    2006-05-19

    The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces

  9. Extraction of proteins from biological fluids by use of an ionic liquid/aqueous two-phase system.

    PubMed

    Du, Zhuo; Yu, Yong-Liang; Wang, Jian-Hua

    2007-01-01

    An ionic liquid/aqueous two-phase system based on the hydrophilic ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) and K(2)HPO(4) has been employed for direct extraction of proteins from human body fluids for the first time. Proteins present at low levels were quantitatively extracted into the BmimCl-rich upper phase with a distribution ratio of about 10 between the upper and lower phase and an enrichment factor of 5. Addition of an appropriate amount of K(2)HPO(4) to the separated upper phase results in a further phase separation, giving rise to an improved enrichment factor of 20. FTIR and UV spectroscopy demonstrated that no chemical (bonding) interactions between the ionic liquid and the protein functional groups were identifiable, while no alterations of the natural properties of the proteins were observed. The partitioning of proteins in the two-phase system was assumed to have been facilitated by the electrostatic potential difference between the coexisting phases, as well as by salting out effects. The system could be applied successfully for the quantification of proteins in human urine after on-line phase separation in a flow system. The use of an ionic liquid, as a green solvent, offers clear advantages over traditional liquid-liquid extractions, in which the use of toxic organic solvents is unavoidable. PMID:17136782

  10. Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid.

    PubMed

    Soheilmoghaddam, Mohammad; Wahit, Mat Uzir

    2013-07-01

    In this study, novel nanocomposite films based on regenerated cellulose/halloysite nanotube (RC/HNT) have been prepared using an environmentally friendly ionic liquid 1-butyl-3-methylimidazolium chloride (BMIMCl) through a simple green method. The structural, morphological, thermal and mechanical properties of the RC/HNT nanocomposites were investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), thermal analysis and tensile strength measurements. The results obtained revealed interactions between the halloysite nanotubes and regenerated cellulose matrix. The thermal stability and mechanical properties of the nanocomposite films, compared with pure regenerated cellulose film, were significantly improved When the halloysite nanotube (HNT) loading was only 2 wt.%, the 20% weight loss temperature (T20) increased 20°C. The Young's modulus increased from 1.8 to 4.1 GPa, while tensile strength increased from 35.30 to 60.50 MPa when 8 wt.% halloysite nanotube (HNT) was incorporated, interestingly without loss of ductility. The nanocomposite films exhibited improved oxygen barrier properties and water absorption resistance compared to regenerated cellulose. PMID:23567285

  11. Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes.

    PubMed

    Mohtar, S S; Tengku Malim Busu, T N Z; Md Noor, A M; Shaari, N; Yusoff, N A; Bustam Khalil, M A; Abdul Mutalib, M I; Mat, H B

    2015-09-01

    The objective of this study is to extract and characterize lignin from oil palm biomass (OPB) by dissolution in 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), followed by the lignin extraction through the CO2 gas purging prior to addition of aluminum potassium sulfate dodecahydrate (AlK(SO4)2 · 12H2O). The lignin yield, Y(L) (%wt.) was found to be dependent of the types of OPB observed for all precipitation methods used. The lignin recovery, RL (%wt.) obtained from CO2-AlK(SO4)2 · 12H2O precipitation was, however dependent on the types of OPB, which contradicted to that of the acidified H2SO4 and HCl solutions of pH 0.7 and 2 precipitations. Only about 54% of lignin was recovered from the OPB. The FTIR results indicate that the monodispersed lignin was successfully extracted from the OPT, OPF and OPEFB having a molecular weight (MW) of 1331, 1263 and 1473 g/mol, and degradation temperature of 215, 207.5 and 272 °C, respectively. PMID:26038325

  12. Charge engineering of cellulases improves ionic liquid tolerance and reduces lignin inhibition.

    PubMed

    Nordwald, Erik M; Brunecky, Roman; Himmel, Michael E; Beckham, Gregg T; Kaar, Joel L

    2014-08-01

    We report a novel approach to concurrently improve the tolerance to ionic liquids (ILs) as well as reduce lignin inhibition of Trichoderma reesei cellulase via engineering enzyme charge. Succinylation of the cellulase enzymes led to a nearly twofold enhancement in cellulose conversion in 15% (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). The improvement in activity upon succinylation correlated with the apparent preferential exclusion of the [Cl] anion in fluorescence quenching assays. Additionally, modeling analysis of progress curves of Avicel hydrolysis in buffer indicated that succinylation had a negligible impact on the apparent KM of cellulase. As evidence of reducing lignin inhibition of T. reesei cellulase, succinylation resulted in a greater than twofold increase in Avicel conversion after 170 h in buffer with 1 wt% lignin. The impact of succinylation on lignin inhibition of cellulase further led to the reduction in apparent KM of the enzyme cocktail for Avicel by 2.7-fold. These results provide evidence that naturally evolved cellulases with highly negative surface charge densities may similarly repel lignin, resulting in improved cellulase activity. Ultimately, these results underscore the potential of rational charge engineering as a means of enhancing cellulase function and thus conversion of whole biomass in ILs. PMID:24522957

  13. Significantly improving enzymatic saccharification of high crystallinity index's corn stover by combining ionic liquid [Bmim]Cl-HCl-water media with dilute NaOH pretreatment.

    PubMed

    He, Yu-Cai; Liu, Feng; Gong, Lei; Zhu, Zheng-Zhong; Ding, Yun; Wang, Cheng; Xue, Yu-Feng; Rui, Huan; Tao, Zhi-Cheng; Zhang, Dan-Ping; Ma, Cui-Luan

    2015-01-01

    In this study, a pretreatment by combining acidified aqueous ionic liquid 1-butyl-3-methylimidazolium chloride (IL [Bmim]Cl) solution with dilute NaOH extraction was employed to pretreat high crystallinity index (CrI) of corn stover before its enzymatic saccharification. After NaOH extraction, [Bmim]Cl-HCl-water (78.8:1.2:20, w/w/w) media was used for further pretreatment at 130 °C for 30 min. After being enzymatically hydrolyzed for 48 h, corn stover pretreated could be biotransformed into reducing sugars in the yield of 95.1%. Furthermore, SEM, XRD and FTIR analyses of untreated and pretreated corn stovers were examined. It was found that the intact structure was disrupted by combination pretreatment and resulted in a porous and amorphous regenerated cellulosic material that greatly improved enzymatic hydrolysis. Finally, the recovered hydrolyzates obtained from the enzymatic hydrolysis of pretreated corn stovers could be fermented into ethanol efficiently. In conclusion, the combination pretreatment shows high potential application in future. PMID:25921785

  14. Ionic Liquid-Assisted Hydrothermal Method Synthesis of Flower-Like MoS2 and Their Electrochemical Performances.

    PubMed

    Li, Maohua; Yang, Bo; Hao, Junying; Lu, Yi; Long, Zerong; Liu, Yumei

    2016-06-01

    Molybdenum disulfide (MoS2) was prepared successfully via hydrothermal reaction at 200 degrees C in water/ethanol (1:1) solvent system using the ammonium molybdate and sodium thiosulfate as the molybdenum sources and sulfur sources, 1-butyl-3-methylimidazolium chloride salt [BMIM][Cl] as the additive agent. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to examine the morphology and structure of flower-like products. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy spectrum analysis results show that the as-prepared product is a pure phase of MoS2. The prepared products are used as electrode materials for Li-ion batteries and showed excellent cycle stability and high Coulombic efficiency at a current density of 200 mA x g(-1) in the voltage range of 0.01 - 3.00 V (vs. Li/Li+). In addition, this paper also examined the influence of the reaction time and the amount of template agent on morphology, and discussed the reaction mechanism of the formation of flower-like morphology. PMID:27427696

  15. Hydrolysis of cellulose catalyzed by novel acidic ionic liquids.

    PubMed

    Zhuo, Kelei; Du, Quanzhou; Bai, Guangyue; Wang, Congyue; Chen, Yujuan; Wang, Jianji

    2015-01-22

    The conversion of cellulosic biomass directly into valuable chemicals becomes a hot subject. Six novel acidic ionic liquids (ILs) based on 2-phenyl-2-imidazoline were synthesized and characterized by UV-VIS, TGA, and NMR. The novel acidic ionic liquids were investigated as catalysts for the hydrolysis of cellulose in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The acidic ionic liquids with anions HSO4(-) and Cl(-) showed better catalytic performance for the hydrolysis of cellulose than those with H2PO4(-). The temperature and dosage of water affect significantly the yield of total reducing sugar (TRS). When the hydrolysis of cellulose was catalyzed by 1-propyl sulfonic acid-2-phenyl imidazoline hydrogensulfate (IL-1) and the dosage of water was 0.2g, the TRS yield was up to 85.1% within 60 min at 100°C. These new acidic ionic liquids catalysts are expected to have a wide application in the conversion of cellulose into valuable chemicals. PMID:25439867

  16. Novel cellulosic gel preparation for using in electro-responsive applications

    NASA Astrophysics Data System (ADS)

    Kunchornsup, Wissawin; Sirivat, Anuvat

    2010-04-01

    Electroactive-papers (EAPaps) are paper that used in the field of electro-responsive applications, consisting primarily of a cellulose. 1-butyl-3-methylimidazolium chloride (BMIMCl) is an interesting ionic liquid that acts as an effective cellulose solvent for EAPap due to its high solubility without chain derivatization, less chain degradation, and stability in electro-responsive applications. In our work, physical and chemical cellulose gels were fabricated and studied for the effects of varying crosslinking ratio (CR) with glutaraldehyde (GA) as the crosslinking agent. The crosslinking reaction conversion could be increased by increasing the CR; the reaction products are ketone linkages and by-product water molecules. A difference in optical properties could be observed and related to the differing amounts of ketone linkages, as confirmed by Fourier transform infrared spectroscopy: Attenuated total reflectance (FTIR-ATR), and the degradation temperature (Td). All of the prepared gels show no significant differences in electrical conductivity; however they can be classified in the level of semiconductors. Our paper-gels showed potential characteristics towards electro-responsive applications as the ionic migration is a promising mechanism and with less preparation time (< 14 hours).

  17. Elucidation of the effect of ionic liquid pretreatment on rice husk via structural analyses

    PubMed Central

    2012-01-01

    Background In the present study, three ionic liquids, namely 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), and 1-ethyl-3-methylimidazolium diethyl phosphate ([EMIM]DEP), were used to partially dissolve rice husk, after which the cellulose were regenerated by the addition of water. The aim of the investigation is to examine the implications of the ionic liquid pretreatments on rice husk composition and structure. Results From the attenuated total reflectance Fourier transform-infrared (ATR FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results, the regenerated cellulose were more amorphous, less crystalline, and possessed higher structural disruption compared with untreated rice husk. The major component of regenerated cellulose from [BMIM]Cl and [EMIM]DEP pretreatments was cellulose-rich material, while cellulose regenerated from [EMIM]OAc was a matrix of cellulose and lignin. Cellulose regenerated from ionic pretreatments could be saccharified via enzymatic hydrolysis, and resulted in relatively high reducing sugars yields, whereas enzymatic hydrolysis of untreated rice husk did not yield reducing sugars. Rice husk residues generated from the ionic liquid pretreatments had similar chemical composition and amorphousity to that of untreated rice husk, but with varying extent of surface disruption and swelling. Conclusions The structural architecture of the regenerated cellulose and rice husk residues showed that they could be used for subsequent fermentation or derivation of cellulosic compounds. Therefore, ionic liquid pretreatment is an alternative in the pretreatment of lignocellulosic biomass in addition to the conventional chemical pretreatments. PMID:22958710

  18. Acid-catalyzed dehydration of fructose into 5-hydroxymethylfurfural by cellulose-derived amorphous carbon.

    PubMed

    Qi, Xinhua; Guo, Haixin; Li, Luyang; Smith, Richard L

    2012-11-01

    Carbonaceous solid (CS) catalysts with --SO₃H, --COOH, and phenolic --OH groups were prepared by incomplete hydrothermal carbonization of cellulose followed by either sulfonation with H₂SO₄ to give carbonaceous sulfonated solid (CSS) material or by both chemical activation with KOH and sulfonation to give activated carbonaceous sulfonated solid (a-CSS) material. The obtained carbon products (CS, CSS, and a-CSS) were amorphous; the CSS material had a small surface area (<0.5 m² g⁻¹) and a high --SO₃H group concentration (0.953 mmol g⁻¹), whereas the a-CSS material had a large surface area (514 m²  g ⁻¹) and a low --SO₃H group concentration (0.172 mmol g⁻¹). The prepared materials were evaluated as catalysts for the dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) in the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). Remarkably high 5-HMF yields (83 %) could be obtained efficiently (80 °C and 10 min reaction time). CSS and a-CSS catalysts had similar catalytic activities and efficiencies for the conversion of fructose to 5-HMF in [BMIM][Cl]; this could be explained by the trade-off between --SO₃H group concentration (high for CSS) and surface area (high for a-CSS). The cellulose-derived catalysts and ionic liquid exhibited constant activity for five successive recycles, and thus, the methods developed provide a renewable strategy for biomass conversion. PMID:22927099

  19. Isolation and Analysis of Keratins and Keratin-Associated Proteins from Hair and Wool.

    PubMed

    Deb-Choudhury, Santanu; Plowman, Jeffrey E; Harland, Duane P

    2016-01-01

    The presence of highly cross-linked protein networks in hair and wool makes them very difficult substrates for protein extraction, a prerequisite for further protein analysis and characterization. It is therefore imperative that these cross-links formed by disulfide bridges are first disrupted for the efficient extraction of proteins. Chaotropes such as urea are commonly used as efficient extractants. However, a combination of urea and thiourea not only improves recovery of proteins but also results in improved resolution of the keratins in 2DE gels. Reductants also play an important role in protein dissolution. Dithiothreitol effectively removes keratinous material from the cortex, whereas phosphines, like Tris(2-carboxyethyl)phosphine, remove material from the exocuticle. The relative extractability of the keratins and keratin-associated proteins is also dependent on the concentration of chaotropes, reductants, and pH, thus providing a means to preferentially extract these proteins. Ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIM(+)[Cl](-)) are known to solubilize wool by disrupting noncovalent interactions, specifically intermolecular hydrogen bonds. BMIM(+)[Cl](-) proved to be an effective extractant of wool proteins and complementary in nature to chaotropes such as urea and thiourea for identifying unique peptides of wool proteins using mass spectrometry (MS). Successful identification of proteins resolved by one- or two-dimensional electrophoresis and MS is highly dependent on the optimal recovery of its protease-digested peptides with an efficient removal of interfering substances. The detergent sodium deoxycholate used in conjunction with Empore™ disks improved identification of proteins by mass spectrometry leading to higher percentage sequence coverage, identification of unique peptides and higher score. PMID:26795475

  20. Ionic liquid and deep eutectic solvent-activated CelA2 variants generated by directed evolution.

    PubMed

    Lehmann, Christian; Bocola, Marco; Streit, Wolfgang R; Martinez, Ronny; Schwaneberg, Ulrich

    2014-06-01

    Chemoenzymatic cellulose degradation is one of the key steps for the production of biomass-based fuels under mild conditions. An effective cellulose degradation process requires diverse physico-chemical dissolution of the biomass prior to enzymatic degradation. In recent years, "green" solvents, such as ionic liquids and, more recently, deep eutectic liquids, have been proposed as suitable alternatives for biomass dissolution by homogenous catalysis. In this manuscript, a directed evolution campaign of an ionic liquid tolerant β-1,4-endoglucanase (CelA2) was performed in order to increase its performance in the presence of choline chloride/glycerol (ChCl:Gly) or 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), as a first step to identify residues which govern ionic strength resistance and obtaining insights for employing cellulases on the long run in homogenous catalysis of lignocellulose degradation. After mutant library screening, variant M4 (His288Phe, Ser300Arg) was identified, showing a dramatically reduced activity in potassium phosphate buffer and an increased activity in the presence of ChCl:Gly or [BMIM]Cl. Further characterization showed that the CelA2 variant M4 is activated in the presence of these solvents, representing a first report of an engineered enzyme with an ionic strength activity switch. Structural analysis revealed that Arg300 could be a key residue for the ionic strength activation through a salt bridge with the neighboring Asp287. Experimental and computational results suggest that the salt bridge Asp287-Arg300 generates a nearly inactive CelA2 variant and activity is regained when ChCl:Gly or [BMIM]Cl are supplemented (~5-fold increase from 0.64 to 3.37 μM 4-MU/h with the addition ChCl:Gly and ~23-fold increase from 3.84 to 89.21 μM 4-pNP/h with the addition of [BMIM]Cl). Molecular dynamic simulations further suggest that the salt bridge between Asp287 and Arg300 in variant M4 (His288Phe, Ser300Arg) modulates the observed salt

  1. Ionic liquids-lithium salts pretreatment followed by ultrasound-assisted extraction of vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside and vitexin from Phyllostachys edulis leaves.

    PubMed

    Hou, Kexin; Chen, Fengli; Zu, Yuangang; Yang, Lei

    2016-01-29

    An efficient method for the extraction of vitexin, vitexin-4″-O-glucoside, and vitexin-2″-O-rhamnoside from Phyllostachys edulis leaves comprises heat treatment using an ionic liquid-lithium salt mixture (using 1-butyl-3-methylimidazolium bromide as the solvent and lithium chloride as the additive), followed by ultrasound-assisted extraction. To obtain higher extraction yields, the effects of the relevant experimental parameters (including heat treatment temperature and time, relative amounts of 1-butyl-3-methylimidazolium bromide and lithium chloride, power and time of the ultrasound irradiation, and the liquid-solid ratio) are evaluated and response surface methodology is used to optimize the significant factors. The morphologies of the treated and untreated P. edulis leaves are studied by scanning electron microscopy. The improved extraction method proposed provides high extraction yield, good repeatability and precision, and has wide potential applications in the analysis of plant samples. PMID:26763300

  2. Organo-niobate Ionic Liquids: Synthesis, Characterization and Application as Acid Catalyst in Pechmann Reactions

    PubMed Central

    Soares, Valerio C. D.; Alves, Melquizedeque B.; Souza, Ernesto R.; Pinto, Ivana O.; Rubim, Joel C.; Andrade, Carlos Kleber Z.; Suarez, Paulo A. Z.

    2007-01-01

    The combinations of 1-butyl-3-methylimidazolium chloride with NbCl5 yielded ionic mixtures with different melting point temperatures and acidity depending on the niobium molar fraction. The mixtures were characterized by thermal (DSC) and spectroscopic (FT-IR and 1H NMR) analysis. The Pechmann reactions of different phenols with ethylacetoacetate, producing coumarins, was used as model to evaluate the catalytic behavior of these mixtures as acid Lewis catalyst. These reactions were carried out using acidic mixtures of 60 mol%.

  3. Preparation of tamarind gum based soft ion gels having thixotropic properties.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2014-02-15

    Tamarind gum was used to prepare ion gels using both synthetic ionic liquids (ILs) namely 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium bromide and bio-based ionic liquids (Bio-ILs) namely choline acrylate, choline caproate and choline caprylate by heating cooling process. The gels were found to have good thermal stability and exhibited thixotropic behaviour. Upon relaxation after applied breaking strain, the recovery of gel structures after ten consecutive cycles was observed. The hydrogel of the gum prepared using ethanol aqueous solution had much inferior quality in terms of viscosity, viscoelasticity, thermal stability and thixotropicity when compared with the ion gels. The ion gels also showed very good adherence to human finger muscles and skin. The ion gels thus prepared may find application in electrochemistry, sensors, actuators and the gels prepared with Bio-ILs could even be useful in biomedical applications. PMID:24507307

  4. Rapid and sensitive analysis of microcystins using ionic liquid-based in situ dispersive liquid-liquid microextraction.

    PubMed

    Yu, Honglian; Clark, Kevin D; Anderson, Jared L

    2015-08-01

    Three structurally different ionic liquids (ILs), namely 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), 1-(6-hydroxyethyl)-3-methylimidazolium chloride ([HeOHMIM][Cl]) and 1-benzyl-3-(2-hydroxyethyl)imidazolium bromide ([BeEOHIM][Br]), were applied as extraction solvents using in situ dispersive liquid-liquid microextraction (in situ DLLME) for the preconcentration of two microcystin variants, microcystin-RR (MC-RR) and microcystin-LR (MC-LR) from aqueous samples. Extraction parameters including sample solution pH, ratio of IL to metathesis reagent, sample volume, IL quantity, and salt concentration were optimized to achieve the best extraction efficiency. The [BeEOHIM][Br] IL, which contains both an aromatic moiety and a hydroxyl group within its chemical structure, exhibited superior extraction efficiency compared to the other two ILs. The analytical performance of the [BeEOHIM][Br] IL as an extraction solvent for in situ DLLME of microcystins was investigated using HPLC-UV and HPLC-MS. The limits of detection (LODs) for MC-RR and MC-LR were 0.7μgL(-1) using UV detection with a linear range from 1 to 50μgL(-1). The separation method was successfully adapted for ESI-MS/SIM detection, wherein the LODs for MC-RR and MC-LR were greatly improved to 0.005 and 0.003μgL(-1), respectively. The accuracy of the method was demonstrated by examining the relative recovery using tap water and river water and produced recoveries ranging from 45.0 to 109.7% and from 46.3 to 103.2%, respectively. PMID:26087964

  5. Elucidating Interactions and Conductivity of Newly Synthesised Low Bandgap Polymer with Protic and Aprotic Ionic Liquids

    PubMed Central

    Attri, Pankaj; Lee, Seung-Hyun; Hwang, Sun Woo; Kim, Joong I. L.; Lee, Sang Woo; Kwon, Gi-Chung; Choi, Eun Ha; Kim, In Tae

    2013-01-01

    In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities. PMID:23874829

  6. Physico-Chemical Properties and Phase Behavior of the Ionic Liquid-β-Cyclodextrin Complexes

    PubMed Central

    Rogalski, Marek; Modaressi, Ali; Magri, Pierre; Mutelet, Fabrice; Grydziuszko, Aleksandra; Wlazło, Michał; Domańska, Urszula

    2013-01-01

    The solubility of β-cyclodextrin (β-CD) in ionic liquids (ILs) and the activity coefficients at infinite dilution ( γ13∞) of more than 20 solutes (alkanes, aromatic hydrocarbons, alcohols) were measured in four chosen ionic liquids, their mixtures with β-CD, and in the β-CD at high temperatures from 338 to 398 K using the inverse gas chromatography. The intermolecular interactions, inclusion complexes and the possible increasing of the solubility of β-CD in water using the IL are presented. The solubility of β-CD in ten chosen hydrophobic ILs at the temperature T = 423 K was detected. The solid-liquid phase diagrams (SLE) of {IL (1) + β-CD (2)} binary systems at the high mole fraction of the IL were measured for three systems (1-ethyl-3-methylimidazolium chloride, [EMIM][Cl], 1-ethyl-3-methylimidazolium bromide, [EMIM][Br]; and for 1-butyl-3-methylimidazolium chloride, [BMIM][Cl]). The eutectic points were determined at the high IL concentration for all binary systems. The intermolecular interaction and the possibility of inclusion complexes of the IL and/or solvents with β-CD were discussed. The infrared spectroscopy, IR was used for the description of the intermolecular interactions in the (β-CD + IL) systems. It was shown via the activity coefficients at infinite dilution results that the inclusion complexes are dependent on the temperature. The addition of β-CD to the IL does not improve the selectivity of the separation of the aliphatics from aromatics. PMID:23945559

  7. Spectroscopic properties and amplified spontaneous emission of fluorescein laser dye in ionic liquids as green media

    NASA Astrophysics Data System (ADS)

    AL-Aqmar, Dalal M.; Abdelkader, H. I.; Abou Kana, Maram T. H.

    2015-09-01

    The use of ionic liquids (ILs) as milieu materials for laser dyes is a promising field and quite competitive with volatile organic solvents and solid state-dye laser systems. This paper investigates some photo-physical parameters of fluorescein dye incorporated into ionic liquids; 1-Butyl-3-methylimidazolium chloride (BMIM Cl), 1-Butyl-3-methylimidazolium tetrachloroaluminate (BMIM AlCl4) and 1-Butyl-3-methylimidazolium tetrafluoroborate (BMIM BF4) as promising host matrix in addition to ethanol as reference. These parameters are: absorption and emission cross-sections, fluorescence lifetime and quantum yield, in addition to the transition dipole moment, the attenuation length and oscillator strength were also investigated. Lasing characteristics such as amplified spontaneous emission (ASE), the gain, and the photostability of fluorescein laser dye dissolved in different host materials were assessed. The composition and properties of the matrix of ILs were found that it has great interest in optimizing the laser performance and photostability of the investigated laser dye. Under transverse pumping of fluorescein dye by blue laser diode (450 nm) of (400 mW), the initial ASE for dye dissolved in BMIM AlCl4 and ethanol were decreased to 39% and 36% respectively as time progressed 132 min. Relatively high efficiency and high fluorescence quantum yield (11.8% and 0.82% respectively) were obtained with good photostability in case of fluorescein in BMIM BF4 that was decreased to ∼56% of the initial ASE after continuously pumping with 400 mW for 132 min.

  8. Base-Promoted Ammonia Borane Hydrogen-Release

    SciTech Connect

    Himmelberger, Daniel W.; Yoon, Chang W.; Bluhm, Martin E.; Carroll, Patrick J.; Sneddon, Larry G.

    2009-10-07

    The strong non-nucleophilic base bis(dimethylamino)naphthalene (Proton Sponge, PS) has been found to promote the rate and extent of H2-release from ammonia borane (AB) either in the solid state or in ionic-liquid and tetraglyme solutions. For example, AB reactions in 1-butyl-3-methylimidazolium chloride (bmimCl) containing 5.3 mol % PS released 2 equiv of H2 in 171 min at 85 °C and only 9 min at 110 °C, whereas comparable reactions without PS required 316 min at 85 °C and 20 min at 110 °C. Ionic-liquid solvents proved more favorable than tetraglyme since they reduced the formation of undesirable products such as borazine. Solid-state and solution 11B NMR studies of PS-promoted reactions in progress support a reaction pathway involving initial AB deprotonation to form the H3BNH2 - anion. This anion can then initiate AB dehydropolymerization to form branched-chain polyaminoborane polymers. Subsequent chain-branching and dehydrogenation reactions lead ultimately to a cross-linked polyborazylene-type product. AB dehydrogenation by lithium and potassium triethylborohydride was found to produce the stabilized Et3BNH2BH3 - anion, with the crystallographically determined structure of the [Et3BNH2BH3]-K+ · 18-crown-6 complex showing that, following AB nitrogen-deprotonation by the triethylborohydride, the Lewis-acidic triethylborane group coordinated at the nitrogen. Model studies of the reactions of [Et3BNH2BH3]-Li+ with AB show evidence of chain-growth, providing additional support for a PS-promoted AB anionic dehydropolymerization H2- release process.

  9. Regenerating cellulose from ionic liquids for an accelerated enzymatic hydrolysis

    SciTech Connect

    Zhao, Hua; Jones, Cecil L; Baker, Gary A; Xia, Shuqian; Olubajo, Olarongbe; Person, Vernecia

    2009-01-01

    The efficient conversion of lignocellulosic materials into fuel ethanol has become a research priority in producing affordable and renewable energy. The pretreatment of lignocelluloses is known to be key to the fast enzymatic hydrolysis of cellulose. Recently, certain ionic liquids (ILs)were found capable of dissolving more than 10 wt% cellulose. Preliminary investigations [Dadi, A.P., Varanasi, S., Schall, C.A., 2006. Enhancement of cellulose saccharification kinetics using an ionic liquid pretreatment step. Biotechnol. Bioeng. 95, 904 910; Liu, L., Chen, H., 2006. Enzymatic hydrolysis of cellulose materials treated with ionic liquid [BMIM]Cl. Chin. Sci. Bull. 51, 2432 2436; Dadi, A.P., Schall, C.A., Varanasi, S., 2007. Mitigation of cellulose recalcitrance to enzymatic hydrolysis by ionic liquid pretreatment. Appl. Biochem. Biotechnol. 137 140, 407 421] suggest that celluloses regenerated from IL solutions are subject to faster saccharification than untreated substrates. These encouraging results offer the possibility of using ILs as alternative and nonvolatile solvents for cellulose pretreatment. However, these studies are limited to two chloride-based ILs: (a) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), which is a corrosive, toxic and extremely hygroscopic solid (m.p. 70 C), and (b) 1-allyl-3-methylimidazolium chloride ([AMIM]Cl), which is viscous and has a reactive side-chain. Therefore, more in-depth research involving other ILs is much needed to explore this promising pretreatment route. For this reason, we studied a number of chloride- and acetate-based ILs for cellulose regeneration, including several ILs newly developed in our laboratory. This will enable us to select inexpensive, efficient and environmentally benign solvents for processing cellulosic biomass. Our data confirm that all regenerated celluloses are less crystalline (58 75% lower) and more accessible to cellulase (>2 times) than untreated substrates. As a result, regenerated Avicel

  10. Understanding chemical reactions of CO2 and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS2 in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

    NASA Astrophysics Data System (ADS)

    Cabaço, M. Isabel; Besnard, Marcel; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J.; Coutinho, João A. P.; Danten, Yann

    2014-06-01

    NMR spectroscopy (1H, 13C, 15N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS2 leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH3COS-), CO2, OCS, and trithiocarbonate (CS32-). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]+ cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS2-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO2-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS2 reacts with the acetate anion leading to the formation of CH3COS-, CO2, and OCS. After these reactions have proceeded the nascent CO2 and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO2) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO2-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO2 molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO2, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS2 is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2).

  11. Understanding chemical reactions of CO{sub 2} and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS{sub 2} in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

    SciTech Connect

    Cabaço, M. Isabel; Besnard, Marcel; Danten, Yann; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J.; Coutinho, João A. P.

    2014-06-28

    NMR spectroscopy ({sup 1}H, {sup 13}C, {sup 15}N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS{sub 2} leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH{sub 3}COS{sup −}), CO{sub 2}, OCS, and trithiocarbonate (CS{sub 3}{sup 2−}). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]{sup +} cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS{sub 2}-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO{sub 2}-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS{sub 2} reacts with the acetate anion leading to the formation of CH{sub 3}COS{sup −}, CO{sub 2}, and OCS. After these reactions have proceeded the nascent CO{sub 2} and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO{sub 2}) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO{sub 2}-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO{sub 2} molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO{sub 2}, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS{sub 2} is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2)

  12. Fabrication and Characterization of Polysaccharide Ion Gels with Ionic Liquids and Their Further Conversion into Value-Added Sustainable Materials

    PubMed Central

    Takada, Akihiko; Kadokawa, Jun-ichi

    2015-01-01

    A review of the fabrication of polysaccharide ion gels with ionic liquids is presented. From various polysaccharides, the corresponding ion gels were fabricated through the dissolution with ionic liquids. As ionic liquids, in the most cases, 1-butyl-3-methylimidazolium chloride has been used, whereas 1-allyl-3methylimidazolium acetate was specifically used for chitin. The resulting ion gels have been characterized by suitable analytical measurements. Characterization of a pregel state by viscoelastic measurement provided the molecular weight information. Furthermore, the polysaccharide ion gels have been converted into value-added sustainable materials by appropriate procedures, such as exchange with other disperse media and regeneration. PMID:25793912

  13. Chloride Test

    MedlinePlus

    ... Addison disease, or increased salt intake. If both chloride and sodium levels are high in a person on a ... anything else I should know? Drugs that affect sodium blood levels will also cause changes in chloride. In addition, swallowing large amounts of baking soda ...

  14. Vinyl chloride

    Integrated Risk Information System (IRIS)

    Vinyl chloride ; CASRN 75 - 01 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  15. Methyl chloride

    Integrated Risk Information System (IRIS)

    Methyl chloride ; CASRN 74 - 87 - 3 ( 07 / 17 / 2001 ) Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for

  16. Ethyl chloride

    Integrated Risk Information System (IRIS)

    Ethyl chloride ; CASRN 75 - 00 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  17. Benzyl chloride

    Integrated Risk Information System (IRIS)

    Benzyl chloride ; CASRN 100 - 44 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic E

  18. Hydrogen chloride

    Integrated Risk Information System (IRIS)

    Hydrogen chloride ; CASRN 7647 - 01 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogeni

  19. Mepiquat chloride

    Integrated Risk Information System (IRIS)

    Mepiquat chloride ; CASRN 24307 - 26 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  20. Allyl chloride

    Integrated Risk Information System (IRIS)

    Allyl chloride ; CASRN 107 - 05 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  1. Acetyl chloride

    Integrated Risk Information System (IRIS)

    Acetyl chloride ; CASRN 75 - 36 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  2. Functionalized Agarose Self-Healing Ionogels Suitable for Supercapacitors.

    PubMed

    Trivedi, Tushar J; Bhattacharjya, Dhrubajyoti; Yu, Jong-Sung; Kumar, Arvind

    2015-10-12

    Agarose has been functionalized (acetylated/carbanilated) in an ionic liquid (IL) medium of 1-butyl-3-methylimidazolium acetate at ambient conditions. The acetylated agarose showed a highly hydrophobic nature, whereas the carbanilated agarose could be dissolved in water as well as in the IL medium. Thermoreversible ionogels were obtained by cooling the IL sols of carbanilated agarose at room temperature. The ionogel prepared from a protic-aprotic mixed-IL system (1-butyl-3-methylimidazolium chloride and N-(2-hydroxyethyl)ammonium formate) demonstrated a superior self-healing property, as confirmed from rheological measurements. The superior self-healing property of such an ionogel has been attributed to the unique inter-intra hydrogen-bonding network of functional groups inserted in the agarose. The ionogel was tested as a flexible solid electrolyte for an activated-carbon-based supercapacitor cell. The measured specific capacitance was found to be comparable with that of a liquid electrolyte system at room temperature and was maintained for up to 1000 charge-discharge cycles. Such novel functionalized-biopolymer self-healing ionogels with flexibility and good conductivity are desirable for energy-storage devices and electronic skins with superior lifespans and robustness. PMID:26280813

  3. On the formation of new reverse micelles: a comparative study of benzene/surfactants/ionic liquids systems using UV-visible absorption spectroscopy and dynamic light scattering.

    PubMed

    Falcone, R Darío; Correa, N Mariano; Silber, Juana J

    2009-09-15

    The microenvironment of the polar core generated in different ionic liquid reverse micelle (IL RM) systems were investigated using the solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) as an absorption probe and dynamic light scattering (DLS) technique. The novel RM systems consist of two different ILs--1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (bmimTf2N)--sequestrated by two different surfactants--Triton X-100 (TX-100) and benzyl-n-hexadecyldimethylammonium chloride (BHDC)--in order to make IL/surfactant/benzene RMs. The effect of the variation of Ws (Ws=[IL]/[surfactant]) on the QB spectroscopy was used to characterize these nonaqueous RMs. DLS results confirm the formation of these IL RM systems because increasing Ws increases the droplet sizes. Moreover it is demonstrated that the structure of the sequestrated ILs depends strongly on the type of surfactant use to create the RMs. PMID:19678620

  4. Desulfurization of oxidized diesel using ionic liquids

    NASA Astrophysics Data System (ADS)

    Wilfred, Cecilia D.; Salleh, M. Zulhaziman M.; Mutalib, M. I. Abdul

    2014-10-01

    The extraction of oxidized sulfur compounds from diesel were carried out using ten types of ionic liquids consisting of different cation and anion i.e. 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazoium thiocyanate, 1-butyl-3-methylimidazoium dicyanamide, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, 1-butyl-3-methylimidazoliumhexafluorophosphate, 1-hexyl-3-methylimidazolium trifluoromethanesulfonate, trioctylmethylammonium chloride, 1-propionitrile-3-butylimidazolium thiocyanate, 1-propionitrile-3-butylimidazolium dicyanamide and 1-butyl-6-methylquinolinium dicyanamide. The oxidation of diesel was successfully done using phosphotungstic acid as the catalyst, hydrogen peroxide (H2O2) as the oxidant and trioctylmethylammonium chloride as the phase transfer agent. The oxidation of diesel changes the sulfur compounds into sulfone which increases its polarity and enhances the ionic liquid's extraction performance. Result showed that ionic liquid [C4mquin][N(CN)2] performed the highest sulfur removal (91% at 1:5 diesel:IL ratio) compared to the others.

  5. Chloride in diet

    MedlinePlus

    ... found in table salt or sea salt as sodium chloride. It is also found in many vegetables. Foods ... Nutrition Board. Dietary Reference Intakes for Water, Potassium, Sodium, Chloride, and Sulfate. National Academy Press, Washington, DC: 2005. ...

  6. Ionic liquid-based aqueous two-phase system, a sample pretreatment procedure prior to high-performance liquid chromatography of opium alkaloids.

    PubMed

    Li, Shehong; He, Chiyang; Liu, Huwei; Li, Kean; Liu, Feng

    2005-11-01

    An ionic liquid, 1-butyl-3-methylimidazolium chloride ([C4 mim]Cl)/salt aqueous two-phase systems (ATPS) was presented as a simple, rapid and effective sample pretreatment technique coupled with high-performance liquid chromatography (HPLC) for analysis of the major opium alkaloids in Pericarpium papaveris. To find optimal conditions, the partition behaviors of codeine and papaverine in ionic liquid/salt aqueous two-phase systems were investigated. Various factors were considered systematically, and the results indicated that both the pH value and the salting-out ability of salt had great influence on phase separation. The recoveries of codeine and papaverine were 90.0-100.2% and 99.3-102.0%, respectively, from aqueous samples of P. papaveris by the proposed method. PMID:16143571

  7. The first molecular level monitoring of carbohydrate conversion to 5-hydroxymethylfurfural in ionic liquids. B2O3--an efficient dual-function metal-free promoter for environmentally benign applications.

    PubMed

    Khokhlova, Elena A; Kachala, Vadim V; Ananikov, Valentine P

    2012-04-01

    The mechanistic nature of the conversion of carbohydrates to the sustainable platform chemical 5-hydroxymethylfurfural (5-HMF) was revealed at the molecular level. A detailed study of the key sugar units involved in the biomass conversion process has shown that the simple dissolution of fructose in the ionic liquid 1-butyl-3-methylimidazolium chloride significantly changes the anomeric composition and favors the formation of the open fructoketose form. A special NMR approach was developed for the determination of molecular structures and monitoring of chemical reactions directly in ionic liquids. The transformation of glucose to 5-HMF has been followed in situ through the detection of intermediate species. A new environmentally benign, easily available, metal-free promoter with a dual functionality (B(2)O(3)) was developed for carbohydrate conversion to 5-HMF. PMID:22359390

  8. Modified pineapple peel cellulose hydrogels embedded with sepia ink for effective removal of methylene blue.

    PubMed

    Dai, Hongjie; Huang, Huihua

    2016-09-01

    Novel composite hydrogels based on pineapple peel cellulose and sepia ink were synthesized by homogeneous acetylation of cellulose in ionic liquid 1-butyl-3-methylimidazolium chloride. The structure and morphology of the prepared hydrogels were characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscope, X-ray diffraction, thermogravimetry and differential scanning calorimetry. The effects of acetylation time, acetylation temperature, molar ratio of acetic anhydride/anhydroglucose unit and the additive amount of sepia ink on methylene blue adsorption capacity of the hydrogels embedded with sepia ink were also investigated. Methylene blue adsorption of the hydrogels followed pseudo-second-order kinetic model and sepia ink improved adsorption capacity significantly. The adsorption capacity at equilibrium was increased from 53.72 to 138.25mg/g when the additive amount of sepia ink of the hydrogels was 10%. PMID:27185109

  9. Separation of Lignin from Corn Stover Hydrolysate with Quantitative Recovery of Ionic Liquid

    PubMed Central

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

    2015-01-01

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent bio-renewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. Here we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. The isolated lignin is not only free from ionic liquid, but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals. PMID:25866701

  10. Advances in the electrodeposition of aluminum from ionic liquid based electrolytes

    NASA Astrophysics Data System (ADS)

    Leadbetter, Kirt C.

    . Advancements of this nonaqueous aluminum plating process have the potential to lead to a novel and competitive commercial aluminum deposition process. In this investigation aluminum electrodeposition from ionic liquid based electrolytes onto steel, copper and magnesium substrates without conversion coatings or strike layers was evaluated in six different ionic liquid based electrolytes in two technical setups. Three of which are commercially available aluminum plating electrolytes, three of which, discussed in literature were created on site by research personnel in the laboratory. The three commercially available electrolytes were: 1-Butyl-3-methylimidazolium chloride ([BMIm]Cl) * 1.5 AlCl3 with proprietary additives from IoLiTec, 1-Ethyl-3-methylimidazolium chloride ([EMIm]Cl) * 1.5 AlCl3 with proprietary additives from IoLiTec, and BasionicsTM AL-02, an aluminum plating electrolyte containing [EMIm]Cl * 1.5 AlCl3 with additives from BASF. The three electrolytes created on site were based on the 1-ethyl-3-methylimidazolium chloride ionic liquid with added 1.5 AlCl3 and one with added sodium dodecyl sulfate. Small scale plating tests in a 25-mL plating cell were conducted to provide a comparative analysis of the six different electrolytes considered. From these investigations, two were chosen to be evaluated in a larger 1-liter plating cell; designed and constructed to provide a more realistic evaluation of plating parameters with selected electrolytes to better portray industrial electroplating conditions. The effect of current density (10-40 mA/cm 2), temperature (30-90° Celsius) and plating bath agitation on current efficiency, corrosion resistance by the ASTM B117 method, adhesion, microstructure, and chemical composition (evaluated with energy-dispersive x-ray spectroscopy) of the plated Al-layer was explored in both the 25-mL and 1-L plating cell investigations. In addition development of pre- and post-treatment processes for the metal substrates was attempted. While

  11. Melaminium chloride hemihydrate.

    PubMed

    Janczak, J; Perpétuo, G J

    2001-09-01

    The crystals of a new melaminium salt, 2,4,6-triamino-1,3,5-triazin-1-ium chloride hemihydrate, C(3)H(7)N(6)(+).Cl(-).0.5H(2)O, are built up from single-protonated melaminium residues, chloride anions and water molecules. The protonated melaminium cations lie on a twofold axis, while the chloride anions and water molecule lie on the m plane. The melaminium residues are interconnected by N-H...N hydrogen bonds, forming chains parallel to the (001) plane. The chains of melaminium residues form a three-dimensional network through hydrogen-bond interactions with chloride anions and water molecules. PMID:11588391

  12. Phosphonium chloride for thermal storage

    NASA Technical Reports Server (NTRS)

    Sutton, J. G.; Heimlich, P. F.; Tepper, E. H.

    1972-01-01

    Development of systems for storage of thermal energy is discussed. Application of phosphonium chloride for heat storage through reversible dissociation is described. Chemical, physical, and thermodynamic properties of phosphonium chloride are analyzed and dangers in using phosphonium chloride are explained.

  13. Chloride flux in phagocytes.

    PubMed

    Wang, Guoshun

    2016-09-01

    Phagocytes, such as neutrophils and macrophages, engulf microbes into phagosomes and launch chemical attacks to kill and degrade them. Such a critical innate immune function necessitates ion participation. Chloride, the most abundant anion in the human body, is an indispensable constituent of the myeloperoxidase (MPO)-H2 O2 -halide system that produces the potent microbicide hypochlorous acid (HOCl). It also serves as a balancing ion to set membrane potentials, optimize cytosolic and phagosomal pH, and regulate phagosomal enzymatic activities. Deficient supply of this anion to or defective attainment of this anion by phagocytes is linked to innate immune defects. However, how phagocytes acquire chloride from their residing environment especially when they are deployed to epithelium-lined lumens, and how chloride is intracellularly transported to phagosomes remain largely unknown. This review article will provide an overview of chloride protein carriers, potential mechanisms for phagocytic chloride preservation and acquisition, intracellular chloride supply to phagosomes for oxidant production, and methods to measure chloride levels in phagocytes and their phagosomes. PMID:27558337

  14. Strontium-89 Chloride

    MedlinePlus

    ... ask your doctor or pharmacist for more information.Strontium-89 chloride is in a class of drugs known as radioisotopes. It delivers radiation to cancer sites and ultimately decreases bone pain. The length of treatment depends on the ...

  15. Mercuric chloride poisoning

    MedlinePlus

    ... Mercuric chloride is a very poisonous form of mercury. It is a type of mercury salt. There are different types of mercury poisonings . This article discusses poisoning from swallowing mercuric ...

  16. Hydrogen chloride test set

    NASA Technical Reports Server (NTRS)

    Workman, G. L.

    1976-01-01

    Detector uses tertiary amine, which makes reaction fairly specific for relatively small highly polarized hydrogen chloride molecule. Reaction is monitored by any microbalance capable of measuring extremely small mass differences in real time.

  17. Chloride removal from vitrification offgas

    SciTech Connect

    Slaathaug, E.J.

    1995-06-01

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations.

  18. Strontium-89 Chloride

    MedlinePlus

    ... doctor if you have or have ever had bone marrow disease, blood disorders, or kidney disease.you should know that strontium-89 chloride may interfere with the normal menstrual cycle (period) in women and may stop sperm production in men. However, ...

  19. Lithium thionyl chloride battery

    SciTech Connect

    Saathoff, D.J.; Venkatasetty, H.V.

    1982-10-19

    The discharge rate and internal conductivity of electrochemical cell including a lithium anode, and a cathode and an electrolyte including LiAlCl4 and SOC2 is improved by the addition of an amount of a mixture containing AlCl3 and butyl pyridinium chloride.

  20. PHOTOOXIDATION OF ALLYL CHLORIDE

    EPA Science Inventory

    The photooxidation of allyl chloride was studied by irradiation either in 100-L Teflon bags or in a 22.7-cu m Teflon smog chamber in the presence of added NOx. In the absence of added hydrocarbons, the reaction involves a Cl atom chain, which leads to a highly reactive system. A ...

  1. Chloride Channels of Intracellular Membranes

    PubMed Central

    Edwards, John C.; Kahl, Christina R.

    2010-01-01

    Proteins implicated as intracellular chloride channels include the intracellular ClC proteins, the bestrophins, the cystic fibrosis transmembrane conductance regulator, the CLICs, and the recently described Golgi pH regulator. This paper examines current hypotheses regarding roles of intracellular chloride channels and reviews the evidence supporting a role in intracellular chloride transport for each of these proteins. PMID:20100480

  2. [Degradation of succinylcholine chloride].

    PubMed

    Németh, G; Török, I; Paál, T

    1993-05-01

    Quantitative thin-layer chormatographic method has been developed for the investigation of the degradation of injection formulations containing succinylcholinium chloride. The method is based on the denistometric determination of the main degradation product, choline at 430 nm after visualization with iodine vapour. The stability of the injection was investigated under various storage conditions and it has been stated that considerable decomposition takes place during as short a period as one week. PMID:8362654

  3. Chloride channels as drug targets

    PubMed Central

    Verkman, Alan S.; Galietta, Luis J. V.

    2013-01-01

    Chloride channels represent a relatively under-explored target class for drug discovery as elucidation of their identity and physiological roles has lagged behind that of many other drug targets. Chloride channels are involved in a wide range of biological functions, including epithelial fluid secretion, cell-volume regulation, neuroexcitation, smooth-muscle contraction and acidification of intracellular organelles. Mutations in several chloride channels cause human diseases, including cystic fibrosis, macular degeneration, myotonia, kidney stones, renal salt wasting and hyperekplexia. Chloride-channel modulators have potential applications in the treatment of some of these disorders, as well as in secretory diarrhoeas, polycystic kidney disease, osteoporosis and hypertension. Modulators of GABAA (γ-aminobutyric acid A) receptor chloride channels are in clinical use and several small-molecule chloride-channel modulators are in preclinical development and clinical trials. Here, we discuss the broad opportunities that remain in chloride-channel-based drug discovery. PMID:19153558

  4. Oxomemazine hydro-chloride.

    PubMed

    Siddegowda, M S; Butcher, Ray J; Akkurt, Mehmet; Yathirajan, H S; Ramesh, A R

    2011-08-01

    IN THE TITLE COMPOUND [SYSTEMATIC NAME: 3-(5,5-dioxo-phen-othia-zin-10-yl)-N,N,2-trimethyl-propanaminium chloride], C(18)H(23)N(2)O(2)S(+)·Cl(-), the dihedral angle between the two outer aromatic rings of the phenothia-zine unit is 30.5 (2)°. In the crystal, the components are linked by N-H⋯Cl and C-H⋯Cl hydrogen bonds and C-H⋯π inter-actions. PMID:22090928

  5. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride, FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and hydrogen chloride. The...

  6. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... Specific Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride... hydrogen chloride. The pure material occurs as hydroscopic, hexagonal, dark crystals. Ferric...

  7. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... Specific Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride... hydrogen chloride. The pure material occurs as hydroscopic, hexagonal, dark crystals. Ferric...

  8. Benzalkonium Chloride and Glaucoma

    PubMed Central

    Kaufman, Paul L.; Kiland, Julie A.

    2014-01-01

    Abstract Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology. PMID:24205938

  9. Reactor-chromatographic determination of vinyl chloride in polyvinyl chloride

    SciTech Connect

    Berezkin, V.G.

    1986-08-01

    The authors carry out a chromatographic study of the volatile products that evolve when various grades of domestic polyvinyl chloride are heated, to determine the concentration of residual monomer. To find vinyl chloride in complex mixtures of air pollutants the authors used sorptive reaction concentration of impurities. This new combination of methods is based on preliminary separation at the sampling stage of impurities that interfere in the analysis, followed by concentration of the desired components in a trap with an adsorbent, and chromatographic determination of the concentrated trace materials. The method obtains low vinyl chloride concentrations (down to 10/sup -4/-10/sup -5/ wt. %) with +/-5 relative error.

  10. Combined effects of raw materials and solvent systems on the preparation and properties of regenerated cellulose fibers.

    PubMed

    Chen, Jinghuan; Guan, Ying; Wang, Kun; Zhang, Xueming; Xu, Feng; Sun, Runcang

    2015-09-01

    To investigate the combined effects of materials and solvents on the preparation, structural and mechanical properties of regenerated cellulose fibers, four cellulosic materials (microcrystalline cellulose, cotton linter pulp, bamboo pulp and bleached softwood sulfite dissolving pulp) and six non-derivative solvents (NaOH/urea aqueous solution, N,N-dimethylacetamide/lithium chloride, N-methyl-morpholine-N-oxide, 1-butyl-3-methylimidazolium chloride, 1-allyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate) were used to prepare fibers with wet spinning method. The results showed that the dissolvability of solvent was the determining factor in cellulose dissolution, and the dissolving time was influenced by the raw materials' properties, such as molecular weight, exposed area and hemicellulose content. The crystallinity and elongation at break of the fibers were almost fixed and not affected by the materials and solvents. However, the tensile strength of the fibers was directly proportional to the molecular weight of the raw materials, and varied with the type of solvents through cellulose degradation. PMID:26005150

  11. Studies Update Vinyl Chloride Hazards.

    ERIC Educational Resources Information Center

    Rawls, Rebecca

    1980-01-01

    Extensive study affirms that vinyl chloride is a potent animal carcinogen. Epidemiological studies show elevated rates of human cancers in association with extended contact with the compound. (Author/RE)

  12. Chloride channels in stroke

    PubMed Central

    Zhang, Ya-ping; Zhang, Hao; Duan, Dayue Darrel

    2013-01-01

    Vascular remodeling of cerebral arterioles, including proliferation, migration, and apoptosis of vascular smooth muscle cells (VSMCs), is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain, ie, stroke. Accumulating evidence strongly supports an important role for chloride (Cl−) channels in vascular remodeling and stroke. At least three Cl− channel genes are expressed in VSMCs: 1) the TMEM16A (or Ano1), which may encode the calcium-activated Cl− channels (CACCs); 2) the CLC-3 Cl− channel and Cl−/H+ antiporter, which is closely related to the volume-regulated Cl− channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR), which encodes the PKA- and PKC-activated Cl− channels. Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization, vasoconstriction, and inhibition of VSMC proliferation. Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species, induces proliferation and inhibits apoptosis of VSMCs. Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension. In addition, Cl− current mediated by gamma-aminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death. This review focuses on the functional roles of Cl− channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Cl− channels as new targets for the prevention and treatment of stroke. PMID:23103617

  13. An XAFS study of nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; G Cheek; K Pandya; W OGrady

    2011-12-31

    Nickel chloride was studied with cyclic voltammetry and X-ray absorption spectroscopy in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Acidic melts display metal stripping peaks which are not observed in the basic melt. EXAFS analysis shows that the nickel is tetrahedrally coordinated with chloride ions in the basic solution. In the acidic solution the nickel is coordinated by six chloride ions that are also associated with aluminum ions.

  14. Regeneration of zinc chloride hydrocracking catalyst

    DOEpatents

    Zielke, Clyde W.

    1979-01-01

    Improved rate of recovery of zinc values from the solids which are carried over by the effluent vapors from the oxidative vapor phase regeneration of spent zinc chloride catalyst is achieved by treatment of the solids with both hydrogen chloride and calcium chloride to selectively and rapidly recover the zinc values as zinc chloride.

  15. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  16. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  17. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  18. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  19. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg. No. 7447-40-7) is a white... manufacturing practice. Potassium chloride may be used in infant formula in accordance with section 412(g)...

  20. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  1. CHLORIDE WASHER PERFORMACE TESTING

    SciTech Connect

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  2. Theoretical Elucidation of Glucose Dehydration to 5-Hydroxymethylfurfural Catalyzed by a SO3H-Functionalized Ionic Liquid.

    PubMed

    Li, Jingjing; Li, Jinghua; Zhang, Dongju; Liu, Chengbu

    2015-10-22

    While the catalytic conversion of glucose to 5-hydroxymethyl furfural (HMF) catalyzed by SO3H-functioned ionic liquids (ILs) has been achieved successfully, the relevant molecular mechanism is still not understood well. Choosing 1-butyl-3-methylimidazolium chloride [C4SO3HmimCl] as a representative of SO3H-functioned IL, this work presents a density functional theory (DFT) study on the catalytic mechanism for conversion of glucose into HMF. It is found that the conversion may proceed via two potential pathways and that throughout most of elementary steps, the cation of the IL plays a substantial role, functioning as a proton shuttle to promote the reaction. The chloride anion interacts with the substrate and the acidic proton in the imidazolium ring via H-bonding, as well as provides a polar environment together with the imidazolium cation to stabilize intermediates and transition states. The calculated overall barriers of the catalytic conversion along two potential pathways are 32.9 and 31.0 kcal/mol, respectively, which are compatible with the observed catalytic performance of the IL under mild conditions (100 °C). The present results provide help for rationalizing the effective conversion of glucose to HMF catalyzed by SO3H-functionalized ILs and for designing IL catalysts used in biomass conversion chemistry. PMID:26434955

  3. Novel applications of ionic liquids in materials processing

    NASA Astrophysics Data System (ADS)

    Reddy, Ramana G.

    2009-05-01

    Ionic liquids are mixtures of organic and inorganic salts which are liquids at room temperature. Several potential applications of ionic liquids in the field of materials processing are electrowinning and electrodeposition of metals and alloys, electrolysis of active metals at low temperature, liquid-liquid extraction of metals. Results using 1-butyl-3-methylimidazolium chloride with AlCl3 at low temperatures yielded high purity aluminium deposits (>99.9% pure) and current efficiencies >98%. Titanium and aluminium were co-deposited with/without the addition of TiCl4 with up to 27 wt% Ti in the deposit with current efficiencies in the range of 78-85 %. Certain ionic liquids are potential replacements for thermal oils and molten salts as heat transfer fluids in solar energy applications due to high thermal stability, very low corrosivity and substantial sensible heat retentivity. The calculated storage densities for several chloride and fluoride ionic liquids are in the range of 160-210 MJ/m3. A 3-D mathematical model was developed to simulate the large scale electrowinning of aluminium. Since ionic liquids processing results in their low energy consumption, low pollutant emissions many more materials processing applications are expected in future.

  4. Chloride in vesicular trafficking and function.

    PubMed

    Stauber, Tobias; Jentsch, Thomas J

    2013-01-01

    Luminal acidification is of pivotal importance for the physiology of the secretory and endocytic pathways and its diverse trafficking events. Acidification by the proton-pumping V-ATPase requires charge compensation by counterion currents that are commonly attributed to chloride. The molecular identification of intracellular chloride transporters and the improvement of methodologies for measuring intraorganellar pH and chloride have facilitated the investigation of the physiology of vesicular chloride transport. New data question the requirement of chloride for pH regulation of various organelles and furthermore ascribe functions to chloride that are beyond merely electrically shunting the proton pump. This review surveys the currently established and proposed intracellular chloride transporters and gives an overview of membrane-trafficking steps that are affected by the perturbation of chloride transport. Finally, potential mechanisms of membrane-trafficking modulation by chloride are discussed and put into the context of organellar ion homeostasis in general. PMID:23092411

  5. Stability of succinylcholine chloride injection.

    PubMed

    Schmutz, C W; Mühlebach, S F

    1991-03-01

    The stability of succinylcholine chloride injection prepared by a hospital pharmacy was studied under a wide variety of conditions. Batches of succinylcholine chloride injection 10 mg/mL containing sodium chloride, methyl-4-hydroxybenzoate, hydrochloric acid, and water were prepared. Samples were tested for the effect of initial pH (3.0 and 4.2) and sterilization (steam treatment at 100 degrees C for 30 minutes and 121 degrees C for 20 minutes) on stability after three weeks; long-term stability under refrigeration (12, 17, and 23 months of storage at 4 degrees C); and the effect of storage temperature (4-6 degrees C, 20-26 degrees C, 35 degrees C, and 70 degrees C) and light exposure at various intervals up to 12 months. Samples were analyzed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Unlike heating at 121 degrees C, heating at 100 degrees C produced no significant loss of succinylcholine chloride, independent of the initial pH. Succinylcholine chloride was hydrolyzed only minimally over 23 months if the solution was stored at 4-6 degrees C. A 10% loss of drug content occurred if solutions were kept at 20-26 degrees C for five months, at 35 degrees C for one month, or at 70 degrees C for one day. Initial degradation was slowed if the solution was protected from light. The assessments by TLC proved to be more sensitive than the HPLC measurements. Succinylcholine chloride injection sterilized at 100 degrees C for 30 minutes can be stored for up to five months at room temperature if protected from light. The preparation is stable for at least two years under refrigeration. PMID:2028996

  6. CHEMILUMINESCENT MONITOR FOR VINYL CHLORIDE

    EPA Science Inventory

    A monitor for vinyl chloride monomer (VCM) in ambient air was constructed using commercially available components of a gas chromatograph (GC) coupled with a chemiluminescence ozone analyzer slightly modified to make it suitable for use as a GC detector. The specificity for VCM is...

  7. Laser using lead chloride vapor

    NASA Technical Reports Server (NTRS)

    Chen, C. J.

    1975-01-01

    By applying electric discharge, lead chloride vapor in tube is dissociated into lead and chlorine atoms. Population inversion of lead atoms is attained subsequently by second discharge, before chemical recombination of lead and chlorine has occurred. Optimum time interval between two discharges is required for maximum laser output.

  8. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, S.J.; Thomas, T.R.

    1975-11-14

    A method is described for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel, and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  9. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, Steven J.; Thomas, Thomas R.

    1977-01-01

    The present invention provides a method for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  10. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  11. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Quality Specifications for Raw Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  12. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  13. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M.; Muller, Jochen A.; Rosner, Bettina M.; Von Abendroth, Gregory; Meshulam-Simon, Galit; McCarty, Perry L

    2011-11-22

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  14. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  15. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b)...

  16. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  17. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  18. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  19. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  20. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  1. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  2. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  3. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  4. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  5. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schulz, W.W.

    1959-08-01

    The removal of chlorides from aqueons solutions is described. The process involves contacting the aqueous chloride containing solution with a benzene solution about 0.005 M in phenyl mercuric acetate whereby the chloride anions are taken up by the organic phase and separating the organic phase from the aqueous solutions.

  6. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  7. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138...

  8. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  9. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  10. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252 Choline chloride. (a) Product. Choline chloride....

  11. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  12. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  13. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  14. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  15. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  16. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  17. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  18. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  19. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34 Section 151.50-34 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-34 Vinyl chloride (vinyl chloride monomer). (a)...

  20. An XAFS Study of Tantalum Chloride in the Ionic Liquid 1-ethyl-3-methyl Imidazolium Chloride/ aluminum Chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Tantalum chloride was studied with extended X-ray absorption fine structure spectroscopy (XAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride ionic liquids (ILs). Anhydrous Ta2Cl10 is more soluble in the basic solution than in the acidic solution and the X-ray absorption data shows that the coordination shell of chlorides around the tantalum is larger in the basic solution. In the acidic solution, tantalum has five chlorides in its coordination shell while in the basic solution; the tantalum is coordinated by seven chlorides. This indicates that the Lewis acidity of the tantalum chloride causes the Ta to coordinate differently in the acidic and the basic solutions.

  1. Extraction of testosterone and epitestosterone in human urine using aqueous two-phase systems of ionic liquid and salt.

    PubMed

    He, Chiyang; Li, Shehong; Liu, Huwei; Li, Kean; Liu, Feng

    2005-08-01

    Based on aqueous two-phase systems (ATPS) consisting of 1-butyl-3-methylimidazolium chloride, a hydrophilic ionic liquid (IL), and K2HPO4, a new and simple extraction technique, coupled with a reversed-phase high performance liquid chromatography (RP-HPLC), was developed for the simultaneous concentration and analysis of testosterone (T) and epitestosterone (ET) in human urine. Under the optimal conditions, the extraction efficiencies for both analytes were 80-90% in a one-step extraction. The method required only 3.0 mL of urine and a single hydrolysis/deproteinization/extraction step followed by direct injection of the IL-rich upper phase into HPLC system for analysis. The method has been satisfactorily applied to the analysis of T and ET in human urine with detection limits of 1 ng/mL and linear ranges of 10-500 ng/mL for both compounds. Compared with conventional liquid-liquid extraction or solid phase extraction, this new method is much "greener" due to no use of volatile organic solvent and low consumption of IL. The proposed extraction technique opens up new possibilities in the separation of other drugs. PMID:16035355

  2. Molecular dynamics investigation of the ionic liquid/enzyme interface: application to engineering enzyme surface charge.

    PubMed

    Burney, Patrick R; Nordwald, Erik M; Hickman, Katie; Kaar, Joel L; Pfaendtner, Jim

    2015-04-01

    Molecular simulations of the enzymes Candida rugosa lipase and Bos taurus α-chymotrypsin in aqueous ionic liquids 1-butyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium ethyl sulfate were used to study the change in enzyme-solvent interactions induced by modification of the enzyme surface charge. The enzymes were altered by randomly mutating lysine surface residues to glutamate, effectively decreasing the net surface charge by two for each mutation. These mutations resemble succinylation of the enzyme by chemical modification, which has been shown to enhance the stability of both enzymes in ILs. After establishing that the enzymes were stable on the simulated time scales, we focused the analysis on the organization of the ionic liquid substituents about the enzyme surface. Calculated solvent charge densities show that for both enzymes and in both solvents that changing positively charged residues to negative charge does indeed increase the charge density of the solvent near the enzyme surface. The radial distribution of IL constituents with respect to the enzyme reveals decreased interactions with the anion are prevalent in the modified systems when compared to the wild type, which is largely accompanied by an increase in cation contact. Additionally, the radial dependence of the charge density and ion distribution indicates that the effect of altering enzyme charge is confined to short range (≤1 nm) ordering of the IL. Ultimately, these results, which are consistent with that from prior experiments, provide molecular insight into the effect of enzyme surface charge on enzyme stability in ILs. PMID:25641162

  3. Ionic Liquid Extractions of Soil Organic Matter

    NASA Astrophysics Data System (ADS)

    Patti, Antonio; Macfarlane, Douglas; Clarke, Michael

    2010-05-01

    A large range of ionic liquids with the ability to dissolve different classes of natural biopolymers (e.g. cellulose, lignin, protein) have been reported in the literature. These have the potential to isolate different fractions of soil organic matter, thus yielding novel information that is not available through other extraction procedures. The ionic liquids dimethylammonium dimethylcarbamate (DIMCARB), alkylbenzenesulfonate and 1-butyl-3methylimidazolium chloride (Bmim Cl) can solubilise selected components of soil organic matter. Soil extractions with these materials showed that the organic matter recovered showed chemical properties that were consistent with humic substances. These extracts had a slightly different organic composition than the humic acids extracted using the traditional International Humic Substances Society (IHSS) method. The ionic liquids also solubilised some inorganic matter from the soil. Humic acids recovered with alkali were also partially soluble in the ionic liquids. DIMCARB appeared to chemically interfere with organic extract, increasing the level of nitrogen in the sample. It was concluded that the ionic liquid Bmim Cl may function as a useful solvent for SOM, and may be used to recover organic matter of a different character to that obtained with alkali

  4. "One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids" [Bioresour. Technol. 102 (11) (2011)].

    PubMed

    Guo, Feng; Fang, Zhen; Tian, Xiao-fei; Long, Yun-Duo; Jiang, Li-Qun

    2013-07-01

    Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate {[BMIm][TS]} had high catalytic activity with 93% esterification rate for oleic acid at 140 °C but only 63.7% Jatropha biodiesel yield at 200 °C. When ZnCl2 was added to [BMIm][TS], a maximum Jatropha biodiesel yield of 92.5% was achieved at 180 °C. Addition of metal ions supplied Lewis acidic sites in ILs promoted both esterification and transestrification reactions. It was also found that the transition metal ions performed higher catalytic activity in transestrification than the ions of Group A. Mixture of [BMIm][TS] and ZnCl2 was easily separated from products for reuse to avoid producing pollutants. PMID:23908993

  5. Conversion of fructose and glucose into 5-hydroxymethylfurfural with lignin-derived carbonaceous catalyst under microwave irradiation in dimethyl sulfoxide-ionic liquid mixtures.

    PubMed

    Guo, Feng; Fang, Zhen; Zhou, Tie-Jun

    2012-05-01

    5-Hydroxymethylfurfural (5-HMF) was successfully produced by the dehydration of fructose and glucose using lignin-derived solid acid catalyst in DMSO-[BMIM][Cl] (dimethyl sulfoxide and 1-butyl-3-methylimidazolium chloride) mixtures. Six solid acid catalysts were synthesized by carbonization and sulfonation of raw biomass materials, i.e., glucose, fructose, cellulose, lignin, bamboo and Jatropha hulls. It was found that lignin-derived solid acid catalyst (LCC) was the most active one in the dehydration of sugars. LCC coupled with microwave irradiation was used for the 5-HMF production, 84% 5-HMF yield with 98% fructose conversion rate was achieved at 110°C for 10 min. Furthermore, 99% glucose was converted with 68% 5-HMF yield under severer condition (160°C for 50 min). LCC was recycled for five times, 5-HMF yield declined only 7%. Use of LCC combined with DMSO-[BMIM][Cl] solution and microwave irradiation is a novel method for the effective production of 5-HMF. PMID:22429401

  6. One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids.

    PubMed

    Guo, Feng; Fang, Zhen; Tian, Xiao-Fei; Long, Yun-Duo; Jiang, Li-Qun

    2011-06-01

    Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate ([BMIm][CH(3)SO(3)]; a Brønsted acidic IL) had the highest catalytic activity with 93% esterification rate for oleic acid at 140°C but only 12% biodiesel yield at 120°C. When FeCl(3) was added to [BMIm][CH(3)SO(3)], a maximum biodiesel yield of 99.7% was achieved at 120°C. Because metal ions in ILs supplied Lewis acidic sites, and more of the sites could be provided by trivalent metallic ions than those of bivalent ones. It was also found that the catalytic activity with bivalent metallic ions increased with atomic radius. Mixture of [BMIm][CH(3)SO(3)] and FeCl(3) was easily separated from products for reuse to avoid producing pollutants. PMID:21420854

  7. Nonaborane and decaborane cluster anions can enhance the ignition delay in hypergolic ionic liquids and induce hypergolicity in molecular solvents.

    PubMed

    McCrary, Parker D; Barber, Patrick S; Kelley, Steven P; Rogers, Robin D

    2014-05-01

    The dissolution of nido-decaborane, B10H14, in ionic liquids that are hypergolic (fuels that spontaneously ignite upon contact with an appropriate oxidizer), 1-butyl-3-methylimidazolium dicyanamide, 1-methyl-4-amino-1,2,4-triazolium dicyanamide, and 1-allyl-3-methylimidazolium dicyanamide, led to the in situ generation of a nonaborane cluster anion, [B9H14](-), and reductions in ignition delays for the ionic liquids suggesting salts of borane anions could enhance hypergolic properties of ionic liquids. To explore these results, four salts based on [B10H13](-) and [B9H14](-), triethylammonium nido-decaborane, tetraethylammonium nido-decaborane, 1-ethyl-3-methylimidazolium arachno-nonaborane, and N-butyl-N-methyl-pyrrolidinium arachano-nonaborane were synthesized from nido-decaborane by reaction of triethylamine or tetraethylammonium hydroxide with nido-decaborane in the case of salts containing the decaborane anion or via metathesis reactions between sodium nonaborane (Na[B9H14]) and the corresponding organic chloride in the case of the salts containing the nonaborane anion. These borane cluster anion salts form stable solutions in some combustible polar aprotic solvents such as tetrahydrofuran and ethyl acetate and trigger hypergolic reactivity of these solutions. Solutions of these salts in polar protic solvents are not hypergolic. PMID:24716643

  8. Carbene formation upon reactive dissolution of metal oxides in imidazolium ionic liquids.

    PubMed

    Wellens, Sil; Brooks, Neil R; Thijs, Ben; Meervelt, Luc Van; Binnemans, Koen

    2014-03-01

    Metal oxides were found to dissolve in different imidazolium ionic liquids with a hydrogen atom in the C2 position of the imidazolium ring, but not if a methyl substituent was present in the C2 position. The crystal structure of the product that crystallised from an ionic liquid containing dissolved silver(i) oxide showed that this was a silver(i) carbene complex. The presence of carbenes in solution was proven by (13)C NMR spectroscopy and the reactions were also monitored by Raman spectroscopy. The dissolution of other metal oxides, namely copper(ii) oxide, zinc(ii) oxide and nickel(ii) oxide, was also studied in imidazolium ionic liquids and it was found that stable zinc(ii) carbenes were formed in solution, but these did not crystallise under the given experimental conditions. A crystalline nickel(ii) carbene complex could be obtained from a solution of nickel(ii) chloride dissolved in a mixture of 1-butyl-3-methylimidazolium and 1-ethyl-3-methylimidazolium acetate. PMID:24390601

  9. Topochemical pretreatment of wood biomass to enhance enzymatic hydrolysis of polysaccharides to sugars.

    PubMed

    Mou, Hong-Yan; Orblin, Elina; Kruus, Kristiina; Fardim, Pedro

    2013-08-01

    The surface chemistry of milled birch and pine wood pretreated by ionic liquid, hydrothermal and hydrotropic methods, followed by enzymatic hydrolysis was studied in this work. Surface coverage by lignin was measured by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to describe the surface chemical composition after pretreatment in detail, and the morphology after pretreatment was investigated by FE-SEM. Ionic liquid (1-ethyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium chloride) pretreatment at room temperature made the samples swell but did not dissolve the wood. Comparing the surface coverage by lignin, both in the case of birch and pine wood, hydrotropic worked best to remove the lignin hampering enzymatic hydrolysis. ToF-SIMS supported this finding, and showed that in birch, the carbohydrates were degraded more than in pine after hydrotropic pretreatment. The glucose yield of birch was improved by hydrotropic pretreatment from 5.1% to 83.9%, more significantly than in case of pine. PMID:23774220

  10. Catalysis of Rice Straw Hydrolysis by the Combination of Immobilized Cellulase from Aspergillus niger on β-Cyclodextrin-Fe3O4 Nanoparticles and Ionic Liquid

    PubMed Central

    Huang, Po-Jung; Chang, Ken-Lin; Chen, Shui-Tein

    2015-01-01

    Cellulase from Aspergillus niger was immobilized onto β-cyclodextrin-conjugated magnetic particles by silanization and reductive amidation. The immobilized cellulase gained supermagnetism due to the magnetic nanoparticles. Ninety percent of cellulase was immobilized, but the activity of immobilized cellulase decreased by 10%. In this study, ionic liquid (1-butyl-3-methylimidazolium chloride) was introduced into the hydrolytic process because the original reaction was a solid-solid reaction. The activity of immobilized cellulase was improved from 54.87 to 59.11 U g immobilized cellulase−1 at an ionic liquid concentration of 200 mM. Using immobilized cellulase and ionic liquid in the hydrolysis of rice straw, the initial reaction rate was increased from 1.629 to 2.739 g h−1 L−1. One of the advantages of immobilized cellulase is high reusability—it was usable for a total of 16 times in this study. Compared with free cellulase, magnetized cellulase can be recycled by magnetic field and the activity of immobilized cellulase was shown to remain at 85% of free cellulase without denaturation under a high concentration of glucose (15 g L−1). Therefore, immobilized cellulase can hydrolyze rice straw continuously compared with free cellulase. The amount of harvested glucose can be up to twentyfold higher than that from the hydrolysis by free cellulase. PMID:25874210

  11. Ionic liquid tunes microemulsion curvature.

    PubMed

    Liu, Liping; Bauduin, Pierre; Zemb, Thomas; Eastoe, Julian; Hao, Jingcheng

    2009-02-17

    Middle-phase microemulsions formed from cationic dioctadecyldimethylammonium chloride (DODMAC), anionic sodium dodecylsulfate (SDS), n-butanol, and n-heptane were studied. An ionic liquid (IL), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), was employed as the electrolyte in the aqueous media instead of inorganic salts usually used in microemulsion formulation. Studies have been carried out as a function of the concentrations of [bmim][BF4], n-butanol, total surfactant (cDODMAC+SDS), and temperature on the phase behavior and the ultralow interfacial tensions in which the anionic component is present in excess in the catanionic film. Ultralow interfacial tension measurements confirmed the formation of middle-phase microemulsions and the necessary conditions for stabilizing middle-phase microemulsions. Electrical conductivity, small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS) experiments were also performed, indicating that the typical heptane domain size has an average radius of 360 A and the ionic liquid induces softening of the charged catanionic film. Most interestingly, the IL concentration (cIL) is shown to act as an effective interfacial curvature-control parameter, representing a new approach to tuning the formulation of microemulsions and emulsions. The results expand the potential uses of ILs but also point to the design of new ILs that may achieve superefficient control over interfacial and self-assembly systems. PMID:19161325

  12. Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies.

    PubMed

    Falcone, R Dario; Baruah, Bharat; Gaidamauskas, Ernestas; Rithner, Christopher D; Correa, N Mariano; Silber, Juana J; Crans, Debbie C; Levinger, Nancy E

    2011-06-01

    Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room-temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. (1)H, (11)B, and (19)F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X-100 (TX-100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim](+) and [BF(4)](-) in the presence of TX-100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim](+) and [BF(4)](-) and migration of Cl(-) within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures. PMID:21547960

  13. Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids

    NASA Astrophysics Data System (ADS)

    Shahid, Robina; Muhammad, Nawshad; Gonfa, Girma; Toprak, Muhammet S.; Muhammed, Mamoun

    2015-10-01

    Zinc sulfide (ZnS) quantum dots (QDs) were synthesized using the microwave assisted ionic liquid (MAIL) route. Three ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4]), trihexyl(tetradecyl) phosphonium bis(trifluoromethanesulfonyl) amide ([P6,6,6,14][TSFA]) and trihexyl(tetradecyl) phosphonium chloride ([P6,6,6,14][Cl]) were used in this study. The size and structure of the QDs were characterized by high-resolution transmission electron microscopy (HR-TEM) and selected area electron diffraction (SAED) pattern, respectively. The synthesized QDs were of wurtzite crystalline structure with size less than 5 nm. The QDs were more uniformly distributed while using the phosponium based ILs as a reaction medium during synthesis. The optical properties were investigated by UV-vis absorption and photoluminescence (PL) emission spectroscopy. The optical properties of QDs showed the quantum confinement effect in their absorption and the effect of cation and anion structural moiety was observed on their bandedge emission. The QDs emission intensity was measured higher for [P6,6,6,14][Cl] due to their better dispersion as well as high charge density of Cl anion. The capability of the ILs in stabilizing the QDs was interpreted by density functional theory (DFT) computations. The obtained results are in good agreement with the theoretical prediction.

  14. Chromatographic determination of biogenic amines in wines after treatment with ionic liquids as novel media.

    PubMed

    Jiang, Hai-Liang; Ying, Li-Yan; Zhou, Sai-Chun; Ying, Min; Shen, Wei; Qiu, Dong-He

    2011-05-01

    Room temperature ionic liquids (RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate ([C(4) MIM][PF(6) ]), were used as the novel media for derivatization, extraction and preconcentration of biogenic amines (BAs) in wines. Six BAs, tryptamine (Try), phenylethylamine (Phe), putrescine (Put), cadaverine (Cad), tyramine (Tyr) and spermine (Spe) were selected as the model compounds and dansyl chloride (Dns-Cl) as the derivatizing reagent. The derivatizations of amines were conducted in water-IL two-phase system, in which the partition property of related substance in the IL was investigated and the mechanism (http://www.iciba.com/mechanism/) of derivation and extraction of amines was discussed. The influencing factors, including sample volume, derivatizing reagent concentration, pH value and ultrasound reaction time, were optimized. The Dns-amines were separated by high-performance liquid chromatography (HPLC), and detected with UVD at 254 nm. For each of the tested amines, a good linearity was obtained in the concentration range of 0.1-20 mg/L with the correlation coefficient (R) of 0.9814-0.9930. The limits of detection reached μg/L level and the relative standard deviations (RSD, n=3) were between 3.2 and 8.1%. Satisfactory recovery for each BA was obtained, ranging from 82.3 to 114.0%. The developed method was successfully applied to determine six BAs in red wines and Chinese yellow wine. PMID:21416603

  15. Pretreatment of corn stover by combining ionic liquid dissolution with alkali extraction.

    PubMed

    Geng, Xinglian; Henderson, Wesley A

    2012-01-01

    Pretreatment plays an important role in the efficient enzymatic hydrolysis of biomass into fermentable sugars for biofuels. A highly effective pretreatment method is reported for corn stover which combines mild alkali-extraction followed by ionic liquid (IL) dissolution of the polysaccharides and regeneration (recovery of the polysaccharides as solids). Air-dried, knife-milled corn stover was soaked in 1% NaOH at a moderate condition (90°C, 1 h) and then thoroughly washed with hot deionized (DI) water. The alkali extraction solublized 75% of the lignin and 37% of the hemicellulose. The corn stover fibers became softer and smoother after the alkali extraction. Unextracted and extracted corn stover samples were separately dissolved in an IL, 1-butyl-3-methylimidazolium chloride (C(4) mimCl), at 130°C for 2 h and then regenerated with DI water. The IL dissolution process did not significantly change the chemical composition of the materials, but did alter their structural features. Untreated and treated corn stover samples were hydrolyzed with commercial enzyme preparations including cellulases and hemicellulases at 50°C. The glucose yield from the corn stover sample that was both alkali-extracted and IL-dissolved was 96% in 5 h of hydrolysis. This is a highly effective methodology for minimizing the enzymatic loading for biomass hydrolysis and/or maximizing the conversion of biomass polysaccharides into sugars. PMID:21809330

  16. Desorption of low-volatility compounds induced by dynamic friction between microdroplets and an ultrasonically vibrating blade.

    PubMed

    Usmanov, D T; Hiraoka, K; Wada, H; Morita, S; Nonami, H

    2016-02-21

    Friction plays an important role in desorption and/or ionization of nonvolatile compounds in mass spectrometry, e.g., sonic spray, easy ambient sonic-spray ionization, solvent-assisted inlet ionization, desorption electrospray, etc. In our previous work, desorption of low molecular weight compounds induced by solid/solid dynamic friction was studied. The objective of this work was to investigate desorption of low-volatility compounds induced by liquid/solid friction. Water/methanol (1/1) microdroplets with ∼30 μm in diameter were generated by using a piezoelectric microdroplet generator. They were injected to analytes deposited on the flat surface of a blade vibrating ultrasonically with the frequency of 40 kHz. Neutral molecules desorbed from the blade were ionized by a helium dielectric barrier discharge (DBD), generating strong signals for samples including drugs, explosives, and insecticides. These signals were not detected when either the blade vibrator or the piezoelectric microdroplet generator was off. In contrast, for ionic compounds such as 1-butyl-3-methylimidazolium bis(trifluoro-methylsulfonyl)imide, p-chlorobenzyl pyridinium chloride, and rhodamine B, strong ion signals were obtained when the vibrator and droplet generator were on, but DBD was off. Sub-nanogram limits of detection were attained for low-volatility compounds. PMID:26779570

  17. Ionic liquid biodegradability depends on specific wastewater microbial consortia.

    PubMed

    Docherty, Kathryn M; Aiello, Steven W; Buehler, Barbara K; Jones, Stuart E; Szymczyna, Blair R; Walker, Katherine A

    2015-10-01

    Complete biodegradation of a newly-synthesized chemical in a wastewater treatment plant (WWTP) eliminates the potential for novel environmental pollutants. However, differences within- and between-WWTP microbial communities may alter expectations for biodegradation. WWTP communities can also serve as a source of unique consortia that, when enriched, can metabolize chemicals that tend to resist degradation, but are otherwise promising green alternatives. We tested the biodegradability of three ionic liquids (ILs): 1-octyl-3-methylpyridinium bromide (OMP), 1-butyl-3-methylpyridinium bromide (BMP) and 1-butyl-3-methylimidazolium chloride (BMIM). We performed tests using communities from two WWTPs at three time points. Site-specific and temporal variation both influenced community composition, which impacted the success of OMP biodegradability. Neither BMP nor BMIM degraded in any test, suggesting that these ILs are unlikely to be removed by traditional treatment. Following standard biodegradation assays, we enriched for three consortia that were capable of quickly degrading OMP, BMP and BMIM. Our results indicate WWTPs are not functionally redundant with regard to biodegradation of specific ionic liquids. However, consortia can be enriched to degrade chemicals that fail biodegradability assays. This information can be used to prepare pre-treatment procedures and prevent environmental release of novel pollutants. PMID:25985304

  18. Esterification of potato starch by a biocatalysed reaction in an ionic liquid.

    PubMed

    Zarski, Arkadiusz; Ptak, Sylwia; Siemion, Przemyslaw; Kapusniak, Janusz

    2016-02-10

    In this study, potato starch was esterified with oleic acid, using 1-butyl-3-methylimidazolium chloride as a reaction medium and an immobilised lipase from Thermomyces lanuginosus as a catalyst. The degree of substitution (DS) of the products was determined by the volumetric method; and the best esterified product (with the highest DS) was determined by an elemental analysis. The effect of the reaction parameters on the DS, such as the time and the temperature, were also studied. The product with the highest DS (0.22) was found in the reaction carried out at 60 °C for 4h. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses confirmed the esterification of the potato starch. Furthermore, the results of X-ray diffraction (XRD) and a scanning electron microscopy (SEM) revealed that the crystallinity and the morphology of the native potato starch was slightly changed during its partial gelatinisation in the ionic liquid, and was completely destroyed as a result of the formation of the esters. The thermal stability of the starch oleate decreased, when compared to the unmodified starch, as was indicated by a thermal gravimetric analysis (TGA). PMID:26686176

  19. Solubility and solvation of monosaccharides in ionic liquids.

    PubMed

    Teles, Ana Rita R; Dinis, Teresa B V; Capela, Emanuel V; Santos, Luís M N B F; Pinho, Simão P; Freire, Mara G; Coutinho, João A P

    2016-07-20

    Herein, solubility experimental data for six monosaccharides, viz.d-(+)-glucose, d-(+)-mannose, d-(-)-fructose, d-(+)-galactose, d-(+)-xylose and l-(+)-arabinose, in four ionic liquids (ILs), at temperatures ranging from 288.2 to 348.2 K, were obtained aimed at gathering a better understanding of their solvation ability and molecular-level mechanisms which rule the dissolution process. To ascertain the chemical features that enhance the solubility of monosaccharides, ILs composed of dialkylimidazolium or tetraalkylphosphonium cations combined with the dicyanamide, dimethylphosphate or chloride anions were investigated. It was found that the ranking of the solubility of monosaccharides depends on the IL; yet, d-(+)-xylose is always the most soluble while d-(-)-fructose is the least soluble monosaccharide. The results obtained show that both the IL cation and the anion play a major role in the solubility of monosaccharides. Finally, from the determination of the respective thermodynamic properties of solution, it was found that enthalpic contributions are dominant in the solubilization process. However, the observed differences in the solubilities of monosaccharides in 1-butyl-3-methylimidazolium dicyanamide are ruled by a change in the entropy of solution. PMID:27380720

  20. Synthesis, micellization behavior and alcohol induced amphipathic cellulose film of cellulose-based amphiphilic surfactant

    NASA Astrophysics Data System (ADS)

    Yang, Fang; Liu, Ya-nan; Yu, Jian-ling; Li, Hai-peng; Li, Gang

    2015-08-01

    This paper presented a novel preparation method of the cellulose-based amphiphilic surfactant, and the surfactant was used to prepare amphipathic cellulose membrane. The native cotton cellulose was tailored to cellulose segments in ionic liquid 1-butyl-3-methylimidazolium chloride. Then, the hydrophobic and hydrophilic modification of cellulose segments were carried out by esterification and graft polymerization of the ɛ-caprolactone (ɛ-CL) monomer onto the hydroxyl group of cellulose as well as sulphonation with sulfamic acid. The amphipathic cellulose membrane was made by cellulose-based amphiphilic surfactant cross-linking with glutaraldehyde. The molecular structure of amphipathic cellulose surfactant was confirmed by FT-IR, and its surface active properties were investigated by Wilhelmy plate method and Steady-state fluorescence probe method, respectively. Experimental results showed that cellulose-based amphiphilic surfactant caused low interfacial tension of 48.62 mN/m and its critical micelle concentration (cmc) value was 0.65 wt% when the grafting ratio of cellulose-g-PCL (poly-caprolactone) was 25.40%. The contact angle between a droplet of water and the surface of membrane was 90.84o, and the surface free energy of the alcohol induced cellulose membrane was 15.7 mJ/m2. This study may help increase using natural and biodegradable surface-activity materials with improved properties as surfactants.

  1. Green synthesis of polymer monoliths incorporated with carbon nanotubes in room temperature ionic liquid and deep eutectic solvents.

    PubMed

    Zhang, Li-Shun; Gao, Shu-Ping; Huang, Yan-Ping; Liu, Zhao-Sheng

    2016-07-01

    In this work, an efficient method to prepare polymer monoliths with incorporated carbon nanotubes in a mixture of room temperature ionic liquid and deep eutectic solvents was developed. With assistance of the binary green solvent, 1-butyl-3-methylimidazolium tetrafluoroborate and choline chloride/ethylene glycol, single-walled carbon nanotubes were dispersed successfully in pre-polymerization mixture without need of oxidative cutting of carbon nanotubes, which may allow depletion of the emission of volatile organic compounds into environment. The novel single-walled carbon nanotubes monolith was evaluated by capillary electrochromatography. Compared with the monolith made without single-walled carbon nanotubes, the monolith with the incorporation of single-walled carbon nanotubes exhibited high column efficiency (251,000plates/m) in the chromatographic separation. The morphology of the monolith can be tuned by the composition of mixture of ionic liquids and deep eutectic solvents to afford good column permeability and excellent separation ability for small molecules of alkyl phenones and alkyl benzenes. The results demonstrated that the method is a green strategy for the fabrication of multifunctional polymer monoliths. PMID:27154683

  2. Shock compression of polyvinyl chloride

    NASA Astrophysics Data System (ADS)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  3. Chloride flux out of Yellowstone National Park

    NASA Astrophysics Data System (ADS)

    Norton, Daniel R.; Friedman, Irving

    1985-12-01

    Monitoring of the chloride concentration, electrical conductivity, and discharge was carried out for the four major rivers of Yellowstone National Park from September 1982 to January 1984. Chloride flux out of the Park was determined from the measured values of chloride concentration and discharge. The annual chloride flux from the Park was 5.86 × 10 10 g. Of this amount 45% was from the Madison River drainage basin, 32% from the Yellowstone River basin, 12% from the Snake River basin, and 11% from the Falls River basin. Of the annual chloride flux from the Yellowstone River drainage basin 36% was attributed to the Yellowstone Lake drainage basin. The geothermal contribution to the chloride flux was determined by subtracting the chloride contribution from rock weathering and atmospheric precipitation and is 94% of the total chloride flux. Calculations of the geothermal chloride flux for each river are given and the implications of an additional chloride flux out of the western Park boundary discussed. An anomalous increase in chloride flux out of the Park was observed for several weeks prior to the Mt. Borah earthquake in Central Idaho on October 28, 1983, reaching a peak value shortly thereafter. It is suggested that the rise in flux was a precursor of the earthquake. The information in this paper provides baseline data against which future changes in the hydrothermal systems can be measured. It also provides measurements related to the thermal contributions from the different drainage basins of the Park.

  4. Chloride flux out of Yellowstone National Park

    USGS Publications Warehouse

    Norton, D.R.; Friedman, I.

    1985-01-01

    Monitoring of the chloride concentration, electrical conductivity, and discharge was carried out for the four major rivers of Yellowstone National Park from September 1982 to January 1984. Chloride flux out of the Park was determined from the measured values of chloride concentration and discharge. The annual chloride flux from the Park was 5.86 ?? 1010 g. Of this amount 45% was from the Madison River drainage basin, 32% from the Yellowstone River basin, 12% from the Snake River basin, and 11% from the Falls River basin. Of the annual chloride flux from the Yellowstone River drainage basin 36% was attributed to the Yellowstone Lake drainage basin. The geothermal contribution to the chloride flux was determined by subtracting the chloride contribution from rock weathering and atmospheric precipitation and is 94% of the total chloride flux. Calculations of the geothermal chloride flux for each river are given and the implications of an additional chloride flux out of the western Park boundary discussed. An anomalous increase in chloride flux out of the Park was observed for several weeks prior to the Mt. Borah earthquake in Central Idaho on October 28, 1983, reaching a peak value shortly thereafter. It is suggested that the rise in flux was a precursor of the earthquake. The information in this paper provides baseline data against which future changes in the hydrothermal systems can be measured. It also provides measurements related to the thermal contributions from the different drainage basins of the Park. ?? 1985.

  5. Salt, chloride, bleach, and innate host defense

    PubMed Central

    Wang, Guoshun; Nauseef, William M.

    2015-01-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  6. Salt, chloride, bleach, and innate host defense.

    PubMed

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  7. Chloride Transporting CLC Proteins1

    NASA Astrophysics Data System (ADS)

    Pusch, Michael

    In the early 1980s, Chris Miller and colleagues described a curious "double-barreled" chloride channel from the electric organ of Torpedo fish reconstituted in planar lipid bilayers (Miller and White, 1980). Single-channel openings occurred in "bursts" separated by long closures. A single burst was characterized by the presence of two open conductance levels of equal size and the gating (i.e., openings and closings) during a burst could be almost perfectly described as a superposition of two identical and independent conductances that switched between open and closed states with voltage-dependent rates α and β (Hanke and Miller, 1983) (Fig. 8.1).

  8. Oxomemazine hydro­chloride

    PubMed Central

    Siddegowda, M. S.; Butcher, Ray J.; Akkurt, Mehmet; Yathirajan, H. S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxo­phen­othia­zin-10-yl)-N,N,2-trimethyl­propanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothia­zine unit is 30.5 (2)°. In the crystal, the components are linked by N—H⋯Cl and C—H⋯Cl hydrogen bonds and C—H⋯π inter­actions. PMID:22090928

  9. An XAFS Study of Niobium chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Niobium chloride was studied with extended X-ray absorption fine structure spectroscopy (EXAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Although anhydrous Nb2Cl10 is more soluble in the basic melt than in the acidic melt, the EXAFS data shows that the coordination shell around the niobium does not change in the different ionic liquids. Both the acidic and basic melts show a coordination of five chlorides in the first shell. This indicates that in this series of ionic liquids, the Nb2Cl10 breaks up into two NbCl5 entities in both the acidic and the basic melts.

  10. [Sodium chloride 0.9%: nephrotoxic crystalloid?].

    PubMed

    Dombre, Vincent; De Seigneux, Sophie; Schiffer, Eduardo

    2016-02-01

    Sodium chloride 0.9%, often incorrectly called physiological saline, contains higher concentration of chloride compared to plasma. It is known that the administration of sodium chloride 0.9% can cause hyperchloremic metabolic acidosis in a reproducible manner. The elevated chloride concentration in 0.9% NaCl solution can also adversely affect renal perfusion. This effect is thought to be induced by hyperchloremia that causes renal artery vasoconstriction. For these reasons, the use of 0.9% NaCl solution is raising attention and some would advocate the use of a more "physiological" solution, such as balanced solutions that contain a level of chloride closer to that of plasma. Few prospective, randomized, controlled trials are available today and most were done in a perioperative setting. Some studies suggest that the chloride excess in 0.9% NaCl solution could have clinical consequences; however, this remains to be established by quality randomized controlled trials. PMID:26999998

  11. Production of anhydrous aluminum chloride composition

    DOEpatents

    Vandergrift, G.F. III; Krumpelt, M.; Horwitz, E.P.

    1981-10-08

    A process is described for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

  12. Chloride transport in human red cells.

    PubMed Central

    Dalmark, M

    1975-01-01

    1. The chloride equilibrium flux (chloride self-exchange) was determined by measuring the rate of 36Cl efflux from radioactively labelled human red cells. The cellular chloride concentration was varied between 5 and 700 mM by the nystatin technique (Cass & Dalmark, 1973). The chloride transport capacity was not affected by the nystatin technique. 2. The chloride equilibrium flux showed saturation kinetics in the pH range between 6-2 and 9-2 (0 degrees C). The chloride transport decreased at chloride concentrations higher than those which gave the maximum transport. 3. The apparent half-saturation constant, (K1/2), depended on the pH and whether the chloride transport was perceived as a function of the chloride concentration in the medium or in the cell water. The (K1/2)m increased and the (K1/2)c decreased with increasing pH. The dependence of the chloride transport on the chloride concentration was described by Michaelis-Menten kinetics at pH 7-2, but at values of pH outside pH 7-8 S-shaped or steeper graphs were observed. 4. The chloride equilibrium flux varied with the pH at constant chloride concentration in the medium (pH 5-7-9-5). The transport had a bell-shaped pH dependence at chloride concentrations below 200 mM. At chloride concentrations between 300 and 600 mM the chloride transport increased with increasing pH to reach a plateau around pH 8. The position of the acidic branches of the pH graphs was independent of the chloride concentration (25-600 mM), but the position of the alkaline branches moved towards higher values of pH with increasing chloride concentration (5-150 mM). Thus, the position of the pH optimum increased with increasing chloride concentration. The chloride transport at low pH values was a function of the inverse second power of the hydrogen ion concentration. The pK of the groups which caused the inhibition was approximately 6 and independent of the temperature (0-18 degrees C). 5. The chloride equilibrium flux as a function of

  13. Indium-111 chloride imaging with ununited fractures

    SciTech Connect

    Sayle, B.A.; Fawcett, H.D.; Yudt, W.M.; Wang, S.C.; Mader, J.T.; Cierny, G. 3d.

    1987-03-01

    Twenty patients with ununited fractures and a suspicion of infection had In-111 chloride imaging. Surgically obtained cultures were positive for infection in 12 and negative in eight patients. In-111 chloride images were positive in all 12 patients with infection but also were positive in six of the patients with negative cultures. It is not possible to differentiate infected from noninfected ununited fractures by In-111 chloride imaging.

  14. Metal chloride cathode for a battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Bankston, C. Perry (Inventor)

    1991-01-01

    A method of fabricating a rechargeable battery is disclosed which includes a positive electrode which contains a chloride of a selected metal when the electrode is in its active state. The improvement comprises fabricating the positive electrode by: providing a porous matrix composed of a metal; providing a solution of the chloride of the selected metal; and impregnating the matrix with the chloride from the solution.

  15. Enrofloxacin hydro-chloride dihydrate.

    PubMed

    Miranda-Calderón, Jorge E; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-04-01

    The asymmetric unit of the title compound, C19H23FN3O3 (+)·Cl(-)·2H2O [systematic name: 4-(3-carb-oxy-1-cyclo-propyl-6-fluoro-4-oxo-1,4-di-hydro-quin-o-lin-7-yl)-1-ethyl-piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol-ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo-propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra-molecular O-H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O-H⋯Cl, N-H⋯Cl and O-H⋯O hydrogen bonds, and a π-π inter-action between the benzene rings [centroid-centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array. PMID:24826167

  16. Irreversible gettering of thionyl chloride

    SciTech Connect

    LeRoy Whinnery; Steve Goods; George Buffleben; Tim Sheppodd

    1999-11-01

    The authors have successfully demonstrated the irreversible gettering of SOCl{sub 2} by ZnO/ASZMTEDA carbon over a modest temperature range. While thionyl chloride decomposition was slow below {minus}20 C, lower temperatures are expected to be less of a problem than at higher temperatures. The approximately 30 cc of thionyl chloride in a typical D-cell would require 50 g of ZnO and 107 g of ASZMTEDA carbon. Fortunately, since it is unlikely to happen at all, it is common practice to assume only one cell will fail (leak) in a given battery pack. So, one charge of getter can protect the whole battery pack. In summary, ZnO/ASZMTEDA carbon fulfills all of the requirements of an ideal getter including: irreversible binding or reaction with SOCl{sub 2}, high volumetric uptake capacity, high efficiency, non-volatile, air stable, insensitive to poisoning, non-toxic, cheap, non-corrosive, and the gettering product is not a liquid or oil that could block further flow or accessibility. Future work in this area includes incorporation of the ZnO and carbon into a structural open-celled porous monolith, as well as, gettering for other types of batteries (e.g., Li/MnO{sub 2}).

  17. Arsenic removal by ferric chloride

    SciTech Connect

    Hering, J.G.; Chen, P.Y.; Wilkie, J.A.; Elimelech, M.; Liang, S.

    1996-04-01

    Bench-scale studies were conducted in model freshwater systems to investigate how various parameters affected arsenic removal during coagulation with ferric chloride and arsenic adsorption onto preformed hydrous ferric oxide. Parameters included arsenic oxidation state and initial concentration, coagulant dosage or adsorbent concentration, pH, and the presence of co-occurring inorganic solutes. Comparison of coagulation and adsorption experiments and of experimental results with predictions based on surface complexation modeling demonstrated that adsorption is an important (though not the sole) mechanism governing arsenic removal during coagulation. Under comparable conditions, better removal was observed with arsenic(V) [As(V)] than with arsenic(III) [As(III)] in both coagulation and adsorption experiments. Below neutral pH values, As(III) removal-adsorption was significantly decreased in the presence of sulfate, whereas only a slight decrease in As(V) removal-adsorption was observed. At high pH, removal-adsorption of As(V) was increased in the presence of calcium. Removal of As(V) during coagulation with ferric chloride is both more efficient and less sensitive than that of As(III) to variations in source water composition.

  18. Production of chlorine from chloride salts

    DOEpatents

    Rohrmann, Charles A.

    1981-01-01

    A process for converting chloride salts and sulfuric acid to sulfate salts and elemental chlorine is disclosed. A chloride salt and sulfuric acid are combined in a furnace where they react to produce a sulfate salt and hydrogen chloride. Hydrogen chloride from the furnace contacts a molten salt mixture containing an oxygen compound of vanadium, an alkali metal sulfate and an alkali metal pyrosulfate to recover elemental chlorine. In the absence of an oxygen-bearing gas during the contacting, the vanadium is reduced, but is regenerated to its active higher valence state by separately contacting the molten salt mixture with an oxygen-bearing gas.

  19. Chloride ingress in cement paste and mortar

    SciTech Connect

    Jensen, O.M.; Hansen, P.F.; Coats, A.M.; Glasser, F.P.

    1999-09-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature). The measurements are modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect diffusion rates.

  20. Fabrication Of Metal Chloride Cathodes By Sintering

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Di Stefano, Salvador; Bankston, C. Perry

    1992-01-01

    Transition-metal chloride cathodes for use in high-temperature rechargeable sodium batteries prepared by sintering transition-metal powders mixed with sodium chloride. Need for difficult and dangerous chlorination process eliminated. Proportions of transition metal and sodium chloride in mixture adjusted to suit specific requirements. Cathodes integral to sodium/metal-chloride batteries, which have advantages over sodium/sulfur batteries including energy densities, increased safety, reduced material and thermal-management problems, and ease of operation and assembly. Being evaluated for supplying electrical power during peak demand and electric vehicles.

  1. XAFS Studies of Ni Ta and Nb Chlorides in the Ionic Liquid 1-Ethyl-3-Methyl Imidazolium Chloride / Aluminum Chloride

    SciTech Connect

    W OGrady; D Roeper; K Pandya; G Cheek

    2011-12-31

    The structures of anhydrous nickel, niobium, and tantalum chlorides have been investigated in situ in acidic and basic ionic liquids (ILs) of 1-methyl-3-ethylimidazolium chloride (EMIC)/AlCl{sub 3} with X-ray absorption spectroscopy (XAS). The coordination of NiCl{sub 2} changes from tetrahedral in basic solution to octahedral in acidic solution. The NiCl{sub 2} is a strong Lewis acid in that it can induce the AlCl{sub 3} to share its chlorides in the highly acidic IL, forming a structure with six near Cl{sup -} ions and eight further distant Al ions which share the chloride ions surrounding the Ni{sup 2+}. When Nb{sub 2}Cl{sub 10}, a dimer, is added to the acidic or basic solution, the dimer breaks apart and forms two species. In the acid solution, two trigonal bipyramids are formed with five equal chloride distances, while in the basic solution, a square pyramid with four chlorides forming a square base and one shorter axial chloride bond. Ta{sub 2}Cl{sub 10} is also a dimer and divides into half in the acidic solution and forms two trigonal bipyramids. In the basic solution, the dimer breaks apart but the species formed is sufficiently acidic that it attracts two additional chloride ions and forms a seven coordinated tantalum species.

  2. Chloride substitution in sodium borohydride

    SciTech Connect

    Ravnsbaek, Dorthe B.; Rude, Line H.; Jensen, Torben R.

    2011-07-15

    The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH{sub 4}, forming Na(BH{sub 4}){sub 0.9}Cl{sub 0.1}, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH{sub 4} is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH{sub 4}){sub 0.43}Cl{sub 0.57}. In addition, annealing results in dissolution of 10-20 mol% NaBH{sub 4} into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements. - Graphical Abstract: Dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. Dissolution is facilitated by two methods: ball milling or annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples. Sample compositions and dissolution mechanism are studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction data. Highlights: > Studies of dissolution of sodium chloride and sodium borohydride into each other. > Solid state diffusion facilitated by mechanical and thermal treatments. > Dissolution is more efficiently induced by heating than by mechanical treatment. > Mechanism for dissolution studied by Rietveld refinement of in situ SR-PXD data.

  3. Glutamate-gated Chloride Channels*

    PubMed Central

    Wolstenholme, Adrian J.

    2012-01-01

    Glutamate-gated chloride channels (GluCls) are found only in protostome invertebrate phyla but are closely related to mammalian glycine receptors. They have a number of roles in these animals, controlling locomotion and feeding and mediating sensory inputs into behavior. In nematodes and arthropods, they are targeted by the macrocyclic lactone family of anthelmintics and pesticides, making the GluCls of considerable medical and economic importance. Recently, the three-dimensional structure of a GluCl was solved, the first for any eukaryotic ligand-gated anion channel, revealing a macrocyclic lactone-binding site between the channel domains of adjacent subunits. This minireview will highlight some unique features of the GluCls and illustrate their contribution to our knowledge of the entire Cys loop ligand-gated ion channel superfamily. PMID:23038250

  4. Chloride ion pairs in water

    SciTech Connect

    Dang, L.X.; Pettitt, B.M.

    1987-09-02

    The study of ions in water by statistical mechanical methods has made a significant contribution to the authors understanding of solution chemistry and biological processes in saline solutions. Integral equation methods have been used recently by Pettitt and Rossky to study solvent-averaged forces and the effective interactions or the potentials of mean force (PMF) for the alkali halides in water at infinite dilution. In this communication, they report a quantitative study of the Cl/sup -/-Cl/sup -/ PMF in water with use of an umbrella sampling method and the same Hamiltonian as that used in the integral equation study. The system studied here consists of two chloride ions and 295 water molecules in a rectangular box with periodic boundary conditions and lengths of 25.4, 18.6, and 18.6 A in the x,y,z directions, respectively.

  5. Sodium-metal chloride batteries

    NASA Technical Reports Server (NTRS)

    Ratnakumar, B. V.; Attia, A. I.; Halpert, G.

    1992-01-01

    It was concluded that rapid development in the technology of sodium metal chloride batteries has been achieved in the last decade mainly due to the: expertise available with sodium sulfur system; safety; and flexibility in design and fabrication. Long cycle lives of over 1000 and high energy densities of approx. 100 Wh/kg have been demonstrated in both Na/FeCl2 and Na/NiCl2 cells. Optimization of porous cathode and solid electrolyte geometries are essential for further enhancing the battery performance. Fundamental studies confirm the capabilities of these systems. Nickel dichloride emerges as the candidate cathode material for high power density applications such as electric vehicle and space.

  6. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 6 2012-07-01 2012-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  7. 29 CFR 1910.1017 - Vinyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 6 2012-07-01 2012-07-01 false Vinyl chloride. 1910.1017 Section 1910.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1017 Vinyl chloride. (a) Scope and...

  8. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  9. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  10. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  11. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  12. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  13. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  14. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  15. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  16. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  17. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  18. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a)...

  19. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride....

  20. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride....

  1. Process for synthesis of beryllium chloride dietherate

    DOEpatents

    Bergeron, Charles; Bullard, John E.; Morgan, Evan

    1991-01-01

    A low temperature method of producing beryllium chloride dietherate through the addition of hydrogen chloride gas to a mixture of beryllium metal in ether in a reaction vessel is described. A reflux condenser provides an exit for hydrogen produced form the reaction. A distillation condenser later replaces the reflux condenser for purifying the resultant product.

  2. Fiber-optic chloride sensor development

    SciTech Connect

    Cosentino, P.; Grossman, B.; Shieh, C.; Doi, S.; Xi, H.; Erbland, P.

    1995-08-01

    Chloride in the form of salt water is a major contaminant of ground water, percolating through landfill liners and causing corrosion of steel. Four fiber-optic sensors capable of detecting chloride concentrations were developed. The most promising sensor detects chloride concentrations from 100 {micro}g/mL to greater than 3,000 {micro}g/mL. This sensor works when the chloride changes a reddish-brown silver chromate strip to white silver chloride. The color change causes the intensity of light propagating through the fiber to increase. The increase is monitored, and a calibration curve depicting light intensity versus chloride concentration results. The most promising sensor was multiplexed to determine the diffusion coefficients of chloride in a saturated sand column. The development, operation, and sensitivity of the sensors are described. Upon further development the sensor could be placed in the soil or in reinforced concrete for insitu monitoring of chloride. The sensor`s advantages over electronic sensors include immunity to corrosion and electromagnetic interference, and the ability for multiplexing sensors onto a single fiber.

  3. Hydrocracking with molten zinc chloride catalyst containing 2-12% ferrous chloride

    DOEpatents

    Zielke, Clyde W.; Bagshaw, Gary H.

    1981-01-01

    In a process for hydrocracking heavy aromatic polynuclear carbonaceous feedstocks to produce hydrocarbon fuels boiling below about 475.degree. C. by contacting the feedstocks with hydrogen in the presence of a molten zinc chloride catalyst and thereafter separating at least a major portion of the hydrocarbon fuels from the spent molten zinc chloride catalyst, an improvement comprising: adjusting the FeCl.sub.2 content of the molten zinc chloride to from about 2 to about 12 mol percent based on the mixture of ferrous chloride and molten zinc chloride.

  4. Determination of residual vinyl chloride in polyvinyl chloride, vinyl chloride copolymers, and articles from polyvinyl chloride by the method of equilibrium vapor analysis

    SciTech Connect

    Kalmykova, T.A.; Konstantinova, E.I.; Lazaris, A. Ya.

    1985-11-01

    In connection with the fact that vinyl chloride (VC) has carcinogenic properties, norms for its content both in the work place and also in polyvinyl chloride (PVC) and articles made from it have been sharply reduced. The method of equilibrium vapor analysis (EVA) has been used to determine vinyl chloride; this is carried out with the aid of devices for automatic metering. In the present work, the authors have investigated the possibility of applying the EVA method to PVC resins, VC copolymers, and articles made of PVC with the objective of developing universal methods of analyzing such objects. A two-stage separation is used in which the sample is preliminarily separated in a fore-column. The separation was worked out on the model mixture of methyl chloride-VC-ethyl chloride. The limit of VC detection is shown to be 5 x 10/sup -6/ to 5 x 10/sup -7/% by wt.

  5. Embedded chloride detectors for roadways and bridges

    NASA Astrophysics Data System (ADS)

    Fuhr, Peter L.; Huston, Dryver R.; McPadden, Adam P.; Cauley, Robert F.

    1996-04-01

    The problems associated with the application of chloride-based deicing agents to roadways and specifically bridges include chemical pollution and accelerated corrosion of strength members (especially rebar) within the structure. In many instances, local ordinances are attempting to force state agencies to reduce, if not eliminate, the use of these chlorides (typically at the cost of increased driving hazards). With respect to the corrosion aspects of chloride application, cracks that occur in the roadway/bridge pavement allow water to seep into the pavement carrying the chloride to the rebar with the resultant increase in corrosion. In response to this problem, particularly in high roadsalt usage areas, a chloride/water impermeable membrane is placed above the rebar matrix so if/when roadway cracking occurs, the roadsalts won't be able to damage the rebar. Such a membrane is costly -- and the question of its in-service performance is questionable. In a joint effort between the University of Vermont and the Vermont Agency of Transportation, we are developing fiber optic chloride detectors which are capable of being embedded into the rebar-concrete roadway under this membrane. The sensing mechanism relies on spectroscopic analysis of a chemical reaction of chloride and reagents (which have been coated onto the ends of fibers). Laboratory results of these detectors and a usable system configuration are presented.

  6. Materials for Conoco zinc chloride hydrocracking process

    SciTech Connect

    Baylor, V.B.; Keiser, J.R.; DeVan, J.H.

    1980-01-01

    Use of zinc chloride to augment hydrogenation of coal and yield a high-octane gasoline product is the most significant feature of a coal liquefaction process being developed by Conoco Coal Development Company. The zinc chloride catalyst is regenerated in a fluidized sand bed, where the spent melt is mixed with air and hydrogen chloride at about 1000/sup 0/C. Recovery is completed at 370/sup 0/C in a condenser, where the zinc chloride is collected and the oxygen and sulfur are separated as H/sub 2/O and SO/sub 2/. The economic viability of the entire process is highly dependent on almost complete recovery of the zinc chloride. The severe environmental conditions of this recovery process cause unique materials problems. Although high-temperature oxidation and sulfidation are being studied in related programs, suitable materials to resist their combined effects along with those of chlorides have not yet been specifically addressed. Common engineering materials, such as the austenitic stainless steels and many nickel-base alloys, are unsuitable because of their inability to tolerate the elevated temperatures and sulfidation, respectively. The objectives of this task are to screen various metallic and ceramic materials for resistance to the zinc chloride recovery system environment and to determine the nature of the attack by exposing coupons to the simulated environment in the laboratory.

  7. Methylene chloride poisoning in a cabinet worker.

    PubMed Central

    Mahmud, M; Kales, S N

    1999-01-01

    More than a million workers are at risk for methylene chloride exposure. Aerosol sprays and paint stripping may also cause significant nonoccupational exposures. After methylene chloride inhalation, significant amounts of carbon monoxide are formed in vivo as a metabolic by-product. Poisoning predominantly affects the central nervous system and results from both carboxyhemoglobin formation and direct solvent-related narcosis. In this report, we describe a case of methylene chloride intoxication probably complicated by exogenous carbon monoxide exposure. The worker's presentation of intermittent headaches was consistent with both methylene chloride intoxication and carbon monoxide poisoning. The exposures and symptoms were corroborated by elevated carboxyhemoglobin saturations and a workplace inspection that documented significant exposures to both methylene chloride and carbon monoxide. When both carbon monoxide and methylene chloride are inhaled, additional carboxyhemoglobin formation is expected. Preventive efforts should include education, air monitoring, and periodic carboxyhemoglobin determinations. Methylene chloride should never be used in enclosed or poorly ventilated areas because of the well-documented dangers of loss of consciousness and death. Images Figure 1 PMID:10464079

  8. Shelf life of unrefrigerated succinylcholine chloride injection.

    PubMed

    Boehm, J J; Dutton, D M; Poust, R I

    1984-02-01

    The shelf life of succinylcholine chloride injection at several pH values when stored at room temperature was evaluated. Solutions containing 20 mg/ml of succinylcholine chloride were stored at 25 and 40 degrees C. The reaction was studied at pH values ranging from 3.0 to 4.5. At two-week intervals, the solutions were assayed by high-pressure liquid chromatography. The initial amount of succinylcholine chloride in all samples was 100.1 +/- 2.37% of label claim. Hydrolysis of succinylcholine chloride in unbuffered solutions followed apparent zero-order kinetics. The pH range of maximum stability was found to be from 3.75 to 4.50. Succinylcholine chloride decomposed at a considerably higher rate at 40 degrees C. Allowing for the effects of pH adjustment during manufacture and degradation during shipping, losses of 7.0% and 9.0% potency can be expected after storage at 25 degrees C for four and six weeks, respectively. Succinylcholine Chloride Injection, USP, should be stored in the refrigerator; if unbuffered succinylcholine chloride injection complying with USP pH limits must be stored at room temperature, it should not be kept for longer than four weeks. PMID:6702837

  9. L-Tryptophan L-tryptophanium chloride

    NASA Astrophysics Data System (ADS)

    Ghazaryan, V. V.; Fleck, M.; Petrosyan, A. M.

    2015-02-01

    L-Tryptophan L-tryptophanium chloride is a new salt with (A⋯A+) type dimeric cation. It crystallizes in the monoclinic system (space group P21, Z = 2). The asymmetric unit contains one zwitterionic L-tryptophan molecule, one L-tryptophanium cation and one chloride anion. The dimeric cation is formed by a Osbnd H⋯O hydrogen bond with the O⋯O distance equal to 2.5556(18) Å. The infrared and Raman spectra of the crystal are studied and compared with the spectra of L-tryptophanium chloride.

  10. Binary Nucleation of Water and Sodium Chloride

    SciTech Connect

    Nemec, Thomas; Marsik, Frantisek; Palmer, Donald

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  11. Water structure in concentrated lithium chloride solutions

    NASA Astrophysics Data System (ADS)

    Tromp, R. H.; Neilson, G. W.; Soper, A. K.

    1992-06-01

    The radial pair distribution functions gHH(r) and gOH(r) (to a good approximation) of 1 and 10 m solutions of lithium chloride in water have been obtained from neutron diffraction. It turns out that the intermolecular water structure in a solution of 10 m is affected considerably by the presence of ions—the number of hydrogen bonds is about 70% lower than in pure water. The intermolecular water structure in 1 m lithium chloride as well as the intramolecular water structure in both 1 and 10 m lithium chloride is not distinguishable from that of pure water in any measurable extent.

  12. Catastrophic event modeling. [lithium thionyl chloride batteries

    NASA Technical Reports Server (NTRS)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  13. Qualitative Determination of Nitrate with Triphenylbenzylphosphonium Chloride.

    ERIC Educational Resources Information Center

    Berry, Donna A.; Cole, Jerry J.

    1984-01-01

    Discusses two procedures for the identification of nitrate, the standard test ("Brown Ring" test) and a new procedure using triphenylbenzylphosphonium chloride (TPBPC). Effectiveness of both procedures is compared, with the TPBPC test proving to be more sensitive and accurate. (JM)

  14. Copper chloride cathode for a secondary battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Nagasubramanian, Ganesan (Inventor); Bankston, Clyde P. (Inventor)

    1990-01-01

    Higher energy and power densities are achieved in a secondary battery based on molten sodium and a solid, ceramic separator such as a beta alumina and a molten catholyte such as sodium tetrachloroaluminate and a copper chloride cathode. The higher cell voltage of copper chloride provides higher energy densities and the higher power density results from increased conductivity resulting from formation of copper as discharge proceeds.

  15. Methyl chloride via oxhydrochlorination of methane

    SciTech Connect

    Jarvis, R.F. Jr.

    1997-12-31

    Dow Corning is developing a route from methane to methyl chloride via oxyhydrochlorination (OHC) chemistry with joint support from the Gas Research Institute and the Department of Energy Federal Energy Technology Center. Dow Corning is the world`s largest producer of methyl chloride and uses it as an intermediate in the production of silicone materials. Other uses include production of higher hydrocarbons, methyl cellulose, quaternary ammonium salts and herbicides. The objective of this project is to demonstrate and develop a route to methyl chloride with reduced variable cost by using methane instead of methanol raw materials. Methyl chloride is currently produced from methanol, but U.S. demand is typically higher than available domestic supply, resulting in fluctuating prices. OHC technology utilizes domestic natural gas as a feedstock, which allows a lower-cost source of methyl chloride which is independent of methanol. In addition to other uses of methyl chloride, OHC could be a key step in a gas-to-liquid fuels process. These uses could divert significant methanol demand to methane. A stable and selective catalyst has been developed in the laboratory and evaluated in a purpose-built demonstration unit. Materials of construction issues have been resolved and the unit has been run under a range of conditions to evaluate catalyst performance and stability. Many technological advances have been made, especially in the areas of catalyst development, online FTIR analysis of the product stream, and recovery of methyl chloride product via an absorber/stripper system. Significant technological hurdles still remain including heat transfer, catalysts scaleup, orthogonality in modeling, and scaleable absorption data. Economics of the oxyhydrochlorination process have been evaluated an found to be unfavorable due to high capital and utility costs. Future efforts will focus on improved methane conversion at high methyl chloride selectivity.

  16. The 5-(4-Ethynylophenoxy) isophthalic chloride

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M.; Jensen, B. J. (Inventor)

    1986-01-01

    Sulfone-ester polymers containing pendent ethynyl groups and a direct and multistep process for preparing them are disclosed. The multistep process involves the conversion of a pendent bromo group to the ethynyl group while the direct route involves reating hydroxy-terminated sulfone oligomer or polymers with a stoichiometric amount of 5-(4-ethynylphenoxy) isophthaloyl chloride. The 5-(4-ethynylphenoxy) isophthaloyl chloride and the process for preparing it are also disclosed.

  17. Abnormal passive chloride absorption in cystic fibrosis jejunum functionally opposes the classic chloride secretory defect

    PubMed Central

    Russo, Michael A.; Högenauer, Christoph; Coates, Stephen W.; Santa Ana, Carol A.; Porter, Jack L.; Rosenblatt, Randall L.; Emmett, Michael; Fordtran, John S.

    2003-01-01

    Due to genetic defects in apical membrane chloride channels, the cystic fibrosis (CF) intestine does not secrete chloride normally. Depressed chloride secretion leaves CF intestinal absorptive processes unopposed, which results in net fluid hyperabsorption, dehydration of intestinal contents, and a propensity to inspissated intestinal obstruction. This theory is based primarily on in vitro studies of jejunal mucosa. To determine if CF patients actually hyperabsorb fluid in vivo, we measured electrolyte and water absorption during steady-state perfusion of the jejunum. As expected, chloride secretion was abnormally low in CF, but surprisingly, there was no net hyperabsorption of sodium or water during perfusion of a balanced electrolyte solution. This suggested that fluid absorption processes are reduced in CF jejunum, and further studies revealed that this was due to a marked depression of passive chloride absorption. Although Na+-glucose cotransport was normal in the CF jejunum, absence of passive chloride absorption completely blocked glucose-stimulated net sodium absorption and reduced glucose-stimulated water absorption 66%. This chloride absorptive abnormality acts in physiological opposition to the classic chloride secretory defect in the CF intestine. By increasing the fluidity of intraluminal contents, absence of passive chloride absorption may reduce the incidence and severity of intestinal disease in patients with CF. PMID:12840066

  18. Structure of complexes between aluminum chloride and other chlorides, 2: Alkali-(chloroaluminates). Gaseous complexes

    NASA Technical Reports Server (NTRS)

    Hargittai, M.

    1980-01-01

    The structural chemistry of complexes between aluminum chloride and other metal chlorides is important both for practice and theory. Condensed-phase as well as vapor-phase complexes are of interest. Structural information on such complexes is reviewed. The first emphasis is given to the molten state because of its practical importance. Aluminum chloride forms volatile complexes with other metal chlorides and these vapor-phase complexes are dealt with in the second part. Finally, the variations in molecular shape and geometrical parameters are summarized.

  19. Vinyl chloride loss during laboratory holding time

    SciTech Connect

    Soule, R.G.; Jones, D.B.A.; Symonik, D.M.; Gerbec, B.A.; Turgeon, D.W.

    1995-12-31

    Because vinyl chloride is a potent human carcinogen, it`s important that analytical results from groundwater samples accurately reflect levels of exposure. This study investigated the current allowable sample holding time of 14 days to determine if vinyl chloride is lost from samples during this time. In addition to lab spiked samples, groundwater was collected from a well known to contain vinyl chloride. A statistically significant (a = 0.05) decrease in vinyl chloride concentrations was observed over the 14-day holding time. The most significant loss was seen for those samples held the maximum length of time (14 days). No differences in degradation pattern were noted between analytical detectors used (PID versus Hall) or sample type (lab versus field). There also was a loss of vinyl chloride observed during the sampling and handling process. Analytical variability at low concentrations and the establishment of health-based guidelines near the analytical detection limit require that multiple samples be collected from a single location when highly accurate results are required. These findings have implications for the accurate generation of public health exposure assessments and the implementation of health-based recommendations at sites with vinyl chloride groundwater contamination.

  20. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  1. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  2. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  3. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  4. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  5. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  6. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  7. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  8. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  9. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  10. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  11. A Sustainable Approach to the Stereoselective Synthesis of Diazaheptacyclic Cage Systems Based on a Multicomponent Strategy in an Ionic Liquid.

    PubMed

    Suresh Kumar, Raju; Almansour, Abdulrahman I; Arumugam, Natarajan; Altaf, Mohammad; Menéndez, José Carlos; Kumar, Raju Ranjith; Osman, Hasnah

    2016-01-01

    The microwave-assisted three-component reactions of 3,5-bis(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones, acenaphthenequinone and cyclic α-amino acids in an ionic liquid, 1-butyl-3-methylimidazolium bromide, occurred through a domino sequence affording structurally intriguing diazaheptacyclic cage-like compounds in excellent yields. PMID:26840282

  12. Ionic Liquid as a Solvent and Catalyst for Acylation of Maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Catalyst-free esterification of maltodextrin was carried out in ionic liquid. Stearate esters of maltodextrin were obtained in various degree of substitution (DS) when vinyl stearate or stearic acid was heated with maltodextrin in ionic liquid, 1-butyl-3-methylimidazolium cyanamide (bmim[dca]). Re...

  13. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  14. Ionic liquid-in-oil microemulsions.

    PubMed

    Eastoe, Julian; Gold, Sarah; Rogers, Sarah E; Paul, Alison; Welton, Tom; Heenan, Richard K; Grillo, Isabelle

    2005-05-25

    Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets. PMID:15898765

  15. Esterification of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We shall discuss the use of various ionic liquids in the preparation of starch esters. Starch was reacted with vinyl acetate in different 1-butyl-3-methylimidazolium (bmim) salts as solvents in an effort to produce starches with different acetylation patterns. Overall degree of substitution (DS) w...

  16. Atmospheric chloride: Its implication for foliar uptake and damage

    NASA Astrophysics Data System (ADS)

    McWilliams, E. L.; Sealy, R. L.

    Atmospheric chloride is inversely related to distance from the Texas coast; r2 = 0.86. Levels of atmospheric chloride are higher in the early summer than in the winter because of salt storms. Leaf chloride l'evels of Tillandsia usneoides L. (Spanish moss) reflect the atmospheric chloride levels; r2 = 0.78. The importance of considering the effect of atmospheric chloride on leaf damage to horticultural crops is discussed.

  17. Commercial scale cucumber fermentations brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride instead of NaCl...

  18. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    PubMed Central

    Eckhardt, M.-C.; Nielsen, P. E.

    2016-01-01

    Background. Congenital chloride diarrhea (CCD) is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3− exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L) and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected.

  19. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    USGS Publications Warehouse

    Tommasso J.R., Wright, M. I.; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  20. Fermentation of cucumbers brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Generation of waste water containing sodium chloride from cucumber fermentation tank yards could be eliminated if cucumbers were fermented in brines that did not contain this salt. To determine if this is feasible, cucumbers were fermented in brines that contained only calcium chloride to maintain f...

  1. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants. 61.65 Section 61.65 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission...

  2. Thermoluminescence of ultra-high dilutions of lithium chloride and sodium chloride

    NASA Astrophysics Data System (ADS)

    Rey, Louis

    2003-05-01

    Ultra-high dilutions of lithium chloride and sodium chloride (10 -30 g cm -3) have been irradiated by X- and γ-rays at 77 K, then progressively rewarmed to room temperature. During that phase, their thermoluminescence has been studied and it was found that, despite their dilution beyond the Avogadro number, the emitted light was specific of the original salts dissolved initially.

  3. Mechanism for forming hydrogen chloride and sodium sulfate from sulfur trioxide, water, and sodium chloride

    NASA Technical Reports Server (NTRS)

    Anderson, A. B.

    1984-01-01

    A molecular orbital study of sodium sulfate and hydrogen chloride formation from sulfur trioxide, water, and sodium chloride shows no activation barrier, in agreement with recent experimental work of Kohl, Fielder, and Stearns. Two overall steps are found for the process. First, gas-phase water reacts with sulfur trioxide along a pathway involving a linear O-H-O transition state yielding closely associated hydroxyl and bisulfite which rearrange to become a hydrogen sulfate molecule. Then the hydrogen sulfate molecule transfers a hydrogen atom to a surface chloride in solid sodium chloride while an electron and a sodium cation simultaneously transfer to yield sodium bisulfate and gas-phase hydrogen chloride. This process repeats. Both of these steps represent well-known reactions for which mechanisms have not been previously determined.

  4. Advanced intermediate temperature sodium copper chloride battery

    NASA Astrophysics Data System (ADS)

    Yang, Li-Ping; Liu, Xiao-Min; Zhang, Yi-Wei; Yang, Hui; Shen, Xiao-Dong

    2014-12-01

    Sodium metal chloride batteries, also called as ZEBRA batteries, possess many merits such as low cost, high energy density and high safety, but their high operation temperature (270-350 °C) may cause several issues and limit their applications. Therefore, decreasing the operation temperature is of great importance in order to broaden their usage. Using a room temperature ionic liquid (RTIL) catholyte composed of sodium chloride buffered 1-ethyl-3-methylimidazolium chloride-aluminum chloride and a dense β″-aluminates solid electrolyte film with 500 micron thickness, we report an intermediate temperature sodium copper chloride battery which can be operated at only 150 °C, therefore alleviating the corrosion issues, improving the material compatibilities and reducing the operating complexities associated with the conventional ZEBRA batteries. The RTIL presents a high ionic conductivity (0.247 S cm-1) at 150 °C and a wide electrochemical window (-2.6 to 2.18 vs. Al3+/Al). With the discharge plateau at 2.64 V toward sodium and the specific capacity of 285 mAh g-1, this intermediate temperature battery exhibits an energy density (750 mWh g-1) comparable to the conventional ZEBRA batteries (728-785 mWh g-1) and superior to commercialized Li-ion batteries (550-680 mWh g-1), making it very attractive for renewable energy integration and other grid related applications.

  5. Combining sulfate electrowinning with chloride leaching

    NASA Astrophysics Data System (ADS)

    Fletcher, A. W.; Sudderth, R. B.; Olafson, S. M.

    1991-08-01

    Although the chloride leaching of copper sulfide concentrates has proved highly efficient, electrowinning from chloride solutions presents many difficulties, notably in cell design and the handling of the powder product. Sulfate electrowinning,on the other hand, continues to improve and has played a significant part in the widespread adoption of the solvent extraction-electrowinning process for copper recovery from low-grade ores. It has been found that the two steps can be combined by introducing a novel solvent extraction process after chloride leaching. This article presents the results of laboratory tests to prove the feasibility of this approach and discusses how it can be integrated into a commercially viable flow sheet.

  6. Reactivity, SCE induction and mutagenicity of benzyl chloride derivatives.

    PubMed

    Hemminki, K; Falck, K; Linnainmaa, K

    1983-08-01

    Benzyl chloride, benzyl bromide, p-methylbenzyl chloride, and p-nitrobenzyl chloride were used to study chemical reactivity with 4-(p-nitrobenzyl)-pyridine (NBP), and with guanosine in vitro, in relation to mutagenic potency in S. typhimurium and sister chromatid exchange (SCE) induction in CHO cells. Benzyl bromide was found to be the most reactive compound, followed by p-methylbenzyl chloride, benzyl chloride and p-nitrobenzyl chloride. The order of mutagenicity was p-nitrobenzyl chloride much greater than benzyl bromide greater than benzyl chloride approximately equal to p-methylbenzyl chloride. The compounds tested caused base-pair mutations only. The order of SCE-inducing ability decreased as follows: benzyl bromide greater than benzyl chloride approximately equal to p-nitrobenzyl chloride approximately equal to p-methylbenzyl chloride. The particularly high mutagenicity of p-nitrobenzyl chloride in bacteria may be due to reactions other than direct aralkylation, or it may react particularly actively with DNA. Among the other compounds, benzyl bromide was the most active aralkylating compound, mutagen and SCE inducer. The results suggested that reaction of N2 of guanine, as compared with N-7 of guanine, failed to show any remarkable mutagenicity or SCE induction, since p-methylbenzyl chloride, reacting preferentially at N2 of guanosine, failed to show unexceptional potency. PMID:6358331

  7. Zinc chloride (smoke bomb) inhalational lung injury

    SciTech Connect

    Matarese, S.L.; Matthews, J.I.

    1986-02-01

    Physicians, military and civilian alike, may be called upon to recognize, treat, and provide long-term care to patients who have suffered a zinc chloride (smoke bomb) inhalational injury. Pathologic changes described in the literature include laryngeal, tracheal, and bronchial mucosal edema and ulceration; interstitial edema; interstitial fibrosis; alveolar obliteration; and bronchiolitis obliterans. Acute injury is associated with a high mortality. Following is a report of a patient with a zinc chloride smoke injury which resulted in subpleural emphysematous blebs complicated by pneumothorax and abnormal exercise physiology. Gradual recovery occurred over several months. However, the chest roentgenogram remains abnormal with emphysematous blebs.

  8. Hazards of lithium thionyl chloride batteries

    NASA Technical Reports Server (NTRS)

    Parry, J. M.

    1978-01-01

    Two different topics which only relate in that they are pertinent to lithium thionyl chloride battery safety are discussed. The first topic is a hazards analysis of a system (risk assessment), a formal approach that is used in nuclear engineering, predicting oil spills, etc. It is a formalized approach for obtaining assessment of the degree of risk associated with the use of any particular system. The second topic is a small piece of chemistry related to the explosions that can occur with lithium thionyl chloride systems. After the two topics are presented, a discussion is generated among the Workshop participants.

  9. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  10. Measuring Sodium Chloride Contents of Aerosols

    NASA Technical Reports Server (NTRS)

    Sinha, M. P.; Friedlander, S. K.

    1986-01-01

    Amount of sodium chloride in individual aerosol particles measured in real time by analyzer that includes mass spectrometer. Analyzer used to determine mass distributions of active agents in therapeutic or diagnostic aerosols derived from saline solutions and in analyzing ocean spray. Aerosol particles composed of sodium chloride introduced into oven, where individually vaporized on hot wall. Vapor molecules thermally dissociated, and some of resulting sodium atoms ionized on wall. Ions leave oven in burst and analyzed by spectrometer, which is set to monitor sodium-ion intensity.

  11. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  12. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  13. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  14. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ferric chloride. 184.1297 Section 184.1297 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  15. MERCURIC CHLORIDE CAPTURE BY ALKALINE SORBENTS

    EPA Science Inventory

    The paper gives results of bench-scale mechanistic studies of mercury/sorbent reactions that showed that mercuric chloride (HgC12) is readily adsorbed by alkaline sorbents, which may offers a less expensive alternative to the use of activated carbons. A laboratory-scale, fixed-b...

  16. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  17. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  18. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  19. Absorption media for irreversibly gettering thionyl chloride

    DOEpatents

    Buffleben, George; Goods, Steven H.; Shepodd, Timothy; Wheeler, David R.; Whinnery, Jr., LeRoy

    2002-01-01

    Thionyl chloride is a hazardous and reactive chemical used as the liquid cathode in commercial primary batteries. Contrary to previous thinking, ASZM-TEDA.RTM. carbon (Calgon Corporation) reversibly absorbs thionyl chloride. Thus, several candidate materials were examined as irreversible getters for thionyl chloride. The capacity, rate and effect of temperature were also explored. A wide variety of likely materials were investigated through screening experiments focusing on the degree of heat generated by the reaction as well as the material absorption capacity and irreversibility, in order to help narrow the group of possible getter choices. More thorough, quantitative measurements were performed on promising materials. The best performing getter was a mixture of ZnO and ASZM-TEDA.RTM. carbon. In this example, the ZnO reacts with thionyl chloride to form ZnCl.sub.2 and SO.sub.2. The SO.sub.2 is then irreversibly gettered by ASZM-TEDA.RTM. carbon. This combination of ZnO and carbon has a high capacity, is irreversible and functions effectively above -20.degree. C.

  20. Potassium chloride deters Lygus hesperus feeding behavior

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A series of bioassays were conducted to determine the response of adult western tarnished plant bugs, Lygus hesperus Knight (Heteroptera: Miridae), to artificial diets containing potassium chloride (KCl). We first examined the feeding behavior of L. hesperus by direct observation on a single diet c...

  1. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  2. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  3. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  4. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  5. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  6. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  7. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  8. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  9. Mercuric chloride (HgCl2)

    Integrated Risk Information System (IRIS)

    Mercuric chloride ( HgCl2 ) ; CASRN 7487 - 94 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Nonc

  10. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Methylene chloride. 173.255 Section 173.255 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and...

  11. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Methylene chloride. 173.255 Section 173.255 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and...

  12. Controlling chloride ions diffusion in concrete

    PubMed Central

    Zeng, Lunwu; Song, Runxia

    2013-01-01

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle. PMID:24285220

  13. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Dimethyldialkylammonium chloride. 173.400 Section 173.400 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Specific Usage Additives §...

  14. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Dimethyldialkylammonium chloride. 173.400 Section 173.400 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Specific Usage Additives §...

  15. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Dimethyldialkylammonium chloride. 173.400 Section 173.400 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Specific Usage Additives §...

  16. 49 CFR 173.322 - Ethyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Ethyl chloride. 173.322 Section 173.322 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation...

  17. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Cetylpyridinium chloride. 173.375 Section 173.375 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Specific Usage Additives §...

  18. 75 FR 19657 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-15

    ... Commission found that the domestic interested party group response to its notice of institution (74 FR 31757... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of Commission determination to conduct a full five-year review concerning the antidumping duty order on...

  19. 75 FR 20625 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-20

    ... established a schedule for the conduct of this review (74 FR 62587, November 30, 2010). Subsequently, counsel... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION:...

  20. CLC chloride channels in Caenorhabditis elegans.

    PubMed

    Schriever, A M; Friedrich, T; Pusch, M; Jentsch, T J

    1999-11-26

    The genome of the nematode Caenorhabditis elegans encodes six putative chloride channels (CeCLC-1 through CeCLC-6) that represent all three known branches of the mammalian CLC gene family. Using promoter fragments to drive the expression of the green fluorescent protein, CeCLC-2, -3, and -4 expression was studied in transgenic C. elegans. CeCLC-4 was specifically expressed in the large H-shaped excretory cell, where it was co-expressed with CeCLC-3, which is also expressed in other cells, including neurons, muscles, and epithelial cells. Also, CeCLC-2 was expressed in several cells of the nervous system, intestinal cells, and vulval muscle cells. Similar to mammalian CLC proteins, only two nematode CLC channels elicited detectable plasma membrane currents in Xenopus oocytes. CeCLC-3 currents were inwardly rectifying and were activated by positive prepulses. Its complex gating behavior can be explained by two gates, at least one of which depends on extracellular anions. In this respect it resembles some mammalian chloride channels with which it also shares a preference of chloride over iodide. C. elegans thus provides new opportunities to understand common mechanisms underlying structure and function in CLC channels and will allow for a genetic dissection of chloride channels in this simple model organism. PMID:10567397

  1. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  2. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., and crystallized. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  3. Hydrolysis of ferric chloride in solution

    SciTech Connect

    Lussiez, G.; Beckstead, L.

    1996-11-01

    The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.

  4. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    NASA Astrophysics Data System (ADS)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  5. Aerobic vinyl chloride metabolism in Mycobacterium aurum L1

    SciTech Connect

    Hartmans, S.; Bont, J.A.M. de )

    1992-04-01

    Mycobacterium aurum L1, capable of growth on vinyl chloride as a sole carbon and energy source, was previously isolated from soil contaminated with vinyl chloride. The initial step in vinyl chloride metabolism in strain L1 is catalyzed by alkene monooxygenase, transforming vinyl chloride into the reactive epoxide chlorooxirane. The enzyme responsible for chlorooxirane degradation appeared to be very unstable and thus hampered the characterization of the second step in vinyl chloride metabolism. Dichloroethenes are also oxidized by vinyl chloride-grown cells of strain L1, but they are not utilized as growth substrates. Three additional bacterial strains which utilize vinyl chloride as a sole carbon and energy source were isolated from environments with no known vinyl chloride contamination. The three new isolates were similar to strain L1 and were also identified as Mycobacterium aurum.

  6. Vinyl chloride and polyvinyl chloride: Toxicology. (Latest citations from the Life Sciences Collection database). Published Search

    SciTech Connect

    1995-12-01

    The bibliography contains citations concerning the toxicity of vinyl chloride and polyvinyl chloride following short- and long-term exposure. The citations explore how these compounds are metabolized and consider their carcinogenic and teratogenetic potential. Methodologies to quantitate their presence in atmospheric dust and body tissues are discussed. Occupational hazards are also noted.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  7. Determination of mercurous chloride and total mercury in mercury ores

    USGS Publications Warehouse

    Fahey, J.J.

    1937-01-01

    A method for the determination of mercurous chloride and total mercury on the same sample is described. The mercury minerals are volatilized in a glass tube and brought into intimate contact with granulated sodium carbonate. The chlorine is fixed as sodium chloride, determined with silver nitrate, and computed to mercurous chloride. The mercury is collected on a previously weighed gold coil and weighed.

  8. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  9. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  10. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  11. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  12. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  13. 21 CFR 520.260 - n-Butyl chloride capsules.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... body weight. Capsules containing 442 milligrams of n-butyl chloride are administered to dogs weighing... 21 Food and Drugs 6 2012-04-01 2012-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride...

  14. 21 CFR 520.260 - n-Butyl chloride capsules.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... body weight. Capsules containing 442 milligrams of n-butyl chloride are administered to dogs weighing... 21 Food and Drugs 6 2011-04-01 2011-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride...

  15. 21 CFR 520.260 - n-Butyl chloride capsules.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... body weight. Capsules containing 442 milligrams of n-butyl chloride are administered to dogs weighing... 21 Food and Drugs 6 2010-04-01 2010-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride...

  16. Making Positive Electrodes For Sodium/Metal Chloride Cells

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Bankston, C. Perry

    1992-01-01

    High coulombic yields provided by sodium/metal chloride battery in which cathode formed by impregnating sintered nickel plaque with saturated solution of nickel chloride. Charge/discharge cycling of nickel chloride electrode results in very little loss of capacity. Used in spacecraft, electric land vehicles, and other applications in which high-energy-density power systems required.

  17. Precipitation of metal nitrides from chloride melts

    SciTech Connect

    Slater, S.A.; Miller, W.E.; Willit, J.L.

    1996-12-31

    Precipitation of actinides, lanthanides, and fission products as nitrides from molten chloride melts is being investigated for use as a final cleanup step in treating radioactive salt wastes generated by electrometallurgical processing of spent nuclear fuel. The radioactive components (eg, fission products) need to be removed to reduce the volume of high-level waste that requires disposal. To extract the fission products from the salt, a nitride precipitation process is being developed. The salt waste is first contacted with a molten metal; after equilibrium is reached, a nitride is added to the metal phase. The insoluble nitrides can be recovered and converted to a borosilicate glass after air oxidation. For a bench-scale experimental setup, a crucible was designed to contact the salt and metal phases. Solubility tests were performed with candidate nitrides and metal nitrides for which there are no solubility data. Experiments were performed to assess feasibility of precipitation of metal nitrides from chloride melts.

  18. Benzalkonium chloride. Health hazard evaluation report

    SciTech Connect

    Bernholc, N.M.

    1984-01-01

    Health hazards associated with the use of benzalkonium chlorides (BAC) are reviewed. Benzalkonium chloride is extensively used as a cationic disinfectant. It is found in a great many over-the-counter and prescription eye products, disinfectants, shampoos, and deodorants, and is used in concentrations that range from 0.001 to 0.01% in eyedrops, up to 2.5% in concentrated liquid disinfectants. Solutions of 0.03 to 0.04% BAC may cause temporary eye irritation in humans but are unlikely to cause any skin response except in persons allergic to quaternary ammonium compounds. Inhalation of a vaporized 10% solution of BAC produced a bronchospasmodic reaction in a previously sensitized individual. At present no other human health effects from BAC have been documented or inferred from exposure to such dilute concentrations.

  19. Method for the regeneration of spent molten zinc chloride

    DOEpatents

    Zielke, Clyde W.; Rosenhoover, William A.

    1981-01-01

    In a process for regenerating spent molten zinc chloride which has been used in the hydrocracking of coal or ash-containing polynuclear aromatic hydrocarbonaceous materials derived therefrom and which contains zinc chloride, zinc oxide, zinc oxide complexes and ash-containing carbonaceous residue, by incinerating the spent molten zinc chloride to vaporize the zinc chloride for subsequent condensation to produce a purified molten zinc chloride: an improvement comprising the use of clay in the incineration zone to suppress the vaporization of metals other than zinc. Optionally water is used in conjunction with the clay to further suppress the vaporization of metals other than zinc.

  20. Gasometric titration for dimethylaluminum chloride analysis.

    PubMed

    Wang, Lin; Maligres, Peter; Eckenroad, Kyle; Simmons, Bryon

    2016-06-01

    A gasometric titration method was developed to quantitate active alkylaluminum content in dimethylaluminum chloride solution to perform the stoichiometry calculation for the reaction charge. The procedure was reproducible with good precision, and the results showed good correlation with ICP-MS method. The gasometric titration is a simple, inexpensive alternative to analysis via ICP-MS which provides more selective analysis of methylaluminum species without the need for inertion. PMID:27017569

  1. Radio-Purification of Neodymium Chloride

    SciTech Connect

    Hans, S.; Yeh, M.; Cumming, J. B.; Hahn, R. L.

    2011-04-27

    Organometallic liquid scintillator becomes one of the man detection mediums for neutrino experiment. Liquid-liquid extraction is the method of choice for loading metallic ions of interest into the organic solvents at BNL. High purity of all starting materials is essential for the optimization of synthesis. A newly developed 'self-scavenging' technique was applied to purify undesired radioisotopes from the starting metal compound and found to effectively remove thorium and such containments from the neodymium chloride for SNO+.

  2. A Duplex Stainless Steel for Chloride Environments

    NASA Astrophysics Data System (ADS)

    Sridhar, N.; Kolts, J.; Flasche, L. H.

    1985-03-01

    This paper examines the effects of microstructural changes on the corrosion, stress corrosion cracking and corrosion fatigue resistance of a duplex stainless steel to chloride environments. The microstructural changes can be precipitation of phases such as sigma and carbides, or changes in the distribution of austenite and ferrite. The former can be important in hot forming operations while the latter is important in welding. The methods of minimizing these deleterious effects can sometimes be different from those used for austenitic stainless steel.

  3. Photolysis of aryl chlorides with aliphatic amines

    SciTech Connect

    Bunce, N.J.

    1982-05-07

    Kinetic arguments show that the aliphatic amine assisted photodechlorinations of chlorides of the benzene, naphthalene, and biphenyl series take place mainly from the triplet excited state. Deuterium labeling studies have been used to determine the origin of the hydrogen atom which replaces chlorine when 4-chlorobiphenyl is photoreduced. Three pathways are inferred: hydrogen abstraction from the solvent and protonation both within the exciplex (or radical ion pair) and by external proton donors.

  4. Lattice vibrations in lead bromide and chloride

    NASA Astrophysics Data System (ADS)

    Carabatos-Nédelec, C.; Bréhat, F.; Wyncke, B.

    Lead bromide and lead chloride lattice dynamics studies by polarized IR reflectivity and Raman scattering are reported at room temperature and at 10 K. Reflectivity spectra from 20 to 300 cm -1 have been fitted with a model of the factorized form of the dielectric function. The lattice modes frequencies, damping factors and oscillators strengths are given, as well as the effective charges of the polar modes. The study concludes the ionic character of the compounds.

  5. Manganese laser using manganese chloride as lasant

    NASA Technical Reports Server (NTRS)

    Chen, C. J.

    1974-01-01

    A manganese vapor laser utilizing manganese chloride as a lasant has been observed and investigated. Lasing is attained by means of two consecutive electrical discharges. The maximum laser output is obtained at a vapor pressure of about 3 torr, a temperature of 680 C, and a time delay between electrical discharges of 150 microsec. The maximum energy density is 1.3 microjoule per cu cm.

  6. Removing Chlorides From Metallurgical-Grade Silicon

    NASA Technical Reports Server (NTRS)

    Breneman, W. C.; Coleman, L. M.

    1982-01-01

    Process for making low-cost silicon for solar cells is further improved. Silane product recycled to feed stripper column converts some of heavy impurities to volatile ones that pass off at top of column with light wastes. Impurities--chlorides of arsenic, phosphorus, and boron-would otherwise be carried to subsequent distillations where they would be difficult to remove. Since only a small amount of silane is recycled, silicon production efficiency remains high.

  7. Inactivation of viruses by benzalkonium chloride.

    PubMed

    Armstrong, J A; Froelich, E J

    1964-03-01

    Benzalkonium chloride (as Roccal or Zephiran) was found to inactivate influenza, measles, canine distemper, rabies, fowl laryngotracheitis, vaccinia, Semliki Forest, feline pneumonitis, meningopneumonitis, and herpes simplex viruses after 10 min of exposure at 30 C or at room temperature. Poliovirus and encephalomyocarditis virus were not inactivated under the same conditions. It was concluded that all viruses tested were sensitive except members of the picorna group. The literature was reviewed. PMID:4288740

  8. Inactivation of Viruses by Benzalkonium Chloride

    PubMed Central

    Armstrong, J. A.; Froelich, E. J.

    1964-01-01

    Benzalkonium chloride (as Roccal or Zephiran) was found to inactivate influenza, measles, canine distemper, rabies, fowl laryngotracheitis, vaccinia, Semliki Forest, feline pneumonitis, meningopneumonitis, and herpes simplex viruses after 10 min of exposure at 30 C or at room temperature. Poliovirus and encephalomyocarditis virus were not inactivated under the same conditions. It was concluded that all viruses tested were sensitive except members of the picorna group. The literature was reviewed. PMID:4288740

  9. Separation, concentration and determination of chloramphenicol in environment and food using an ionic liquid/salt aqueous two-phase flotation system coupled with high-performance liquid chromatography.

    PubMed

    Han, Juan; Wang, Yun; Yu, Cuilan; Li, Chunxiang; Yan, Yongsheng; Liu, Yan; Wang, Liang

    2011-01-31

    Ionic liquid-salt aqueous two-phase flotation (ILATPF) is a novel, green, non-toxic and sensitive samples pretreatment technique. ILATPF coupled with high-performance liquid chromatography (HPLC) was developed for the analysis of chloramphenicol, which combines ionic liquid aqueous two-phase system (ILATPS) based on imidazolium ionic liquid (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl) and inorganic salt (K(2)HPO(4)) with solvent sublation. In ILATPF systems, phase behaviors of the ILATPF were studied for different types of ionic liquids and salts. The sublation efficiency of chloramphenicol in [C(4)mim]Cl-K(2)HPO(4) ILATPF was influenced by the types of salts, concentration of K(2)HPO(4) in aqueous solution, solution pH, nitrogen flow rate, sublation time and the amount of [C(4)mim]Cl. Under the optimum conditions, the average sublation efficiency is up to 98.5%. The mechanism of ILATPF contains two principal processes. One is the mechanism of IL-salt ILATPS formation, the other is solvent sublation. This method was practical when applied to the analysis of chloramphenicol in lake water, feed water, milk, and honey samples with the linear range of 0.5-500 ng mL(-1). The method yielded limit of detection (LOD) of 0.1 ng mL(-1) and limit of quantification (LOQ) of 0.3 ng mL(-1). The recovery of CAP was 97.1-101.9% from aqueous samples of environmental and food samples by the proposed method. Compared with liquid-liquid extraction, solvent sublation and ionic liquid aqueous two-phase extraction, ILATPF can not only separate and concentrate chloramphenicol with high sublation efficiency, but also efficiently reduce the wastage of IL. This novel technique is much simpler and more environmentally friendly and is suggested to have important applications for the concentration and separation of other small biomolecules. PMID:21168562

  10. Molecular simulation and experimental study of CO2 absorption in ionic liquid reverse micelle.

    PubMed

    Shi, Wei; Hong, Lei; Damodaran, Krishnan; Nulwala, Hunaid B; Luebke, David R

    2014-12-01

    The structure and dynamics for CO2 absorption in ionic liquid reverse micelle (ILRM) were studied using molecular simulations. The ILRM consisted of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) ionic liquid (IL) as the micelle core, the benzylhexadecyldimethylammonium ([BHD](+)) chloride ([Cl](-)) was the cationic surfactant, and benzene was used as the continuous solvent phase in this study. The diffusivity values of this ILRM system were also experimentally determined. Simulations indicate that there is ion exchange between the IL anion ([BF4](-)) and the surfactant anion ([Cl](-)). It was also found that the [bmim][BF4] IL exhibits small local density at the interface region between the IL core and the [BHD](+) surfactant cation layer, which leads to a smaller density for the [bmim][BF4] IL inside the reverse micelle (RM) compared with the neat IL. These simulation findings are consistent with experimental results. Both our simulations and experimental results show that [bmim][BF4] inside the RM diffuses 5-26 times faster than the neat IL, which is partly due to the fast particle diffusion for the ILRM nanodroplet (IL and surfactant) as a whole in benzene solvent compared with neat [bmim][BF4] diffusion. Additionally, it was found that [bmim][BF4] IL solved in benzene diffuses 2 orders of magnitude faster than the neat IL. Lastly, simulations show that CO2 molecules are absorbed in four different regions of the ILRM system, that is, (I) in the IL inner core, (II) in the [BHD](+) surfactant cation layer, (III) at the interface between the [BHD](+) surfactant cation layer and benzene solvent, and (IV) in the benzene solvent. The CO2 solubility was found to decrease in the order II > III ∼ IV > I, while the CO2 diffusivity and permeability decrease in the following order: IV > III > II > I. PMID:25382316

  11. Thermoelectric Potential of Polymer-Scaffolded Ionic Liquid Membranes

    NASA Astrophysics Data System (ADS)

    Datta, R. S.; Said, S. M.; Sahamir, S. R.; Karim, M. R.; Sabri, M. F. M.; Nakajo, T.; Kubouchi, M.; Hayashi, K.; Miyazaki, Y.

    2014-06-01

    Organic thin films have been viewed as potential thermoelectric (TE) materials, given their ease of fabrication, flexibility, cost effectiveness, and low thermal conductivity. However, their intrinsically low electrical conductivity is a main drawback which results in a relatively lower TE figure of merit for polymer-based TE materials than for inorganic materials. In this paper, a technique to enhance the ion transport properties of polymers through the introduction of ionic liquids is presented. The polymer is in the form of a nanofiber scaffold produced using the electrospinning technique. These fibers were then soaked in different ionic liquids based on substituted imidazolium such as 1-ethyl-3-methylimidazolium chloride or 1-butyl-3-methylimidazolium bromide. This method was applied to electrospun polyacrylonitrile and a mixture of polyvinyl alcohol and chitosan polymers. The ion transport properties of the membranes have been observed to increase with increasing concentration of ionic liquid, with maximum electrical conductivity of 1.20 × 10-1 S/cm measured at room temperature. Interestingly, the maximum electrical conductivity value surpassed the value of pure ionic liquids. These results indicate that it is possible to significantly improve the electrical conductivity of a polymer membrane through a simple and cost-effective method. This may in turn boost the TE figures of merit of polymer materials, which are well known to be considerably lower than those of inorganic materials. Results in terms of the Seebeck coefficient of the membranes are also presented in this paper to provide an overall representation of the TE potential of the polymer-scaffolded ionic liquid membranes.

  12. High-performance lithium storage in an ultrafine manganese fluoride nanorod anode with enhanced electrochemical activation based on conversion reaction.

    PubMed

    Rui, Kun; Wen, Zhaoyin; Huang, Xiao; Lu, Yan; Jin, Jun; Shen, Chen

    2016-02-01

    A facile, one-step solvothermal reaction route for the preparation of manganese fluoride nanorods is successfully developed using manganese(II) chloride tetrahydrate (MnCl2·4H2O) as the manganese source and the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BmimBF4) as the fluorine source. X-ray diffraction, field-emission scanning electron microscopy and high-resolution transmission electron microscopy (HRTEM) are conducted to characterize the structural and microstructural properties of the synthesized MnF2. The pure-phase tetragonal MnF2 displays nanorod-like morphology with a diameter of about 20 nm and a length of several hundreds of nanometers. The electrochemical performance of the MnF2 nanorod anode for rechargeable lithium batteries is investigated. A reversible discharge capacity as high as 443 mA h g(-1) at 0.1 C is obtained for the lithium uptake reaction with an initial discharge plateau around 0.7 V. The striking enhancement in electrochemical Li storage performance in ultrafine MnF2 nanorods can be attributed to the small diameters of the nanorods and efficient one-dimensional electron transport pathways. Long cycle performance for 2000 cycles at 10 C with a stabilized capacity of about 430 mA h g(-1) after activation is also achieved. Furthermore, lithiated and delithiated MnF2 anodes are analyzed with HRTEM to elucidate the conversion mechanism for the electrochemical reaction of MnF2 nanorods with Li at a microscopic level. PMID:26766389

  13. Boldine action against the stannous chloride effect.

    PubMed

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS. PMID:10624900

  14. Lead chloride crystal growth from boiling solutions

    NASA Astrophysics Data System (ADS)

    Veintemillas-Verdaguer, S.; Rodríguez-Clemente, R.; Torrent-Burgues, J.

    1993-03-01

    Lead chloride single crystals can be grown from boiling solutions using KNO3-H20 solutions as a solvent. Crystals of 1 mm size produced by gel-growth technique were used as seeds. The solubility of PbC12 increases almost linearly with the KNO3 molality being 0.63m in a 7m KNO3 aqueous solutions at 105°C and pH = 2.6; this increase is related to the decrease of the activity coefficient of lead chloride in these solutions. In the first experiments, the supersaturation was attained by solvent extraction, but due to the simultaneous changes in the concentration of the KNO3 mineralizer during the extraction, the growth rate was irregular and defective crystals were obtained. The experimental set-up was therefore modified and a transport technique was added to the system in order to feed the boiling reactor continuously with fresh lead chloride solution. The growth of the crystals takes place at constant concentration of KNO3 in these new conditions. With this experimental modification, isometric PbCI2 crystals of up to lcm size were obtained in three weeks. The observed morphology is close to that calculated by Woensdregt and Hartmann [J. Crystal Growth 87(1988)561].

  15. Pyramidal cells accumulate chloride at seizure onset

    PubMed Central

    Lillis, Kyle P; Kramer, Mark A; Mertz, Jerome; Staley, Kevin J

    2012-01-01

    Seizures are thought to originate from a failure of inhibition to quell hyperactive neural circuits, but the nature of this failure remains unknown. Here we combine high-speed two-photon imaging with electrophysiological recordings to directly evaluate the interaction between populations of interneurons and principal cells during the onset of seizure-like activity in mouse hippocampal slices. Both calcium imaging and dual patch clamp recordings reveal that in vitro seizure-like events (SLEs) are preceded by pre-ictal bursts of activity in which interneurons predominate. Corresponding changes in intracellular chloride concentration were observed in pyramidal cells using the chloride indicator Clomeleon. These changes were measurable at SLE onset and became very large during the SLE. Pharmacological manipulation of GABAergic transmission, either by blocking GABAA receptors or by hyperpolarizing the GABAA reversal potential, converted SLEs to short interictal-like bursts. Together, our results support a model in which pre-ictal GABAA receptor-mediated chloride influx shifts EGABA to produce a positive feedback loop that contributes to the initiation of seizure activity. PMID:22677032

  16. An autopsy case of zinc chloride poisoning.

    PubMed

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death. PMID:27497327

  17. Understanding microwave vessel contamination by chloride species.

    PubMed

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature. PMID:27474275

  18. Watershed scale chloride storage across a gradient of urbanization

    NASA Astrophysics Data System (ADS)

    Wellen, C. C.; Oswald, C. J.; Oni, S. K.

    2014-12-01

    Sodium chloride is the main de-icing agent used during the winter in Canada and the northern United States. However, little is known about the long term fate, residence time, and ecological effects of chloride. This talk integrates work taking place across three sites in Southern Ontario, Canada: Hamilton Harbour, the Toronto lakeshore, and Lake Simcoe. We quantify chloride inputs, outputs, and changes in storage for a number of watersheds across a gradient of urbanization. For the three winter months (January, February, March), we show that stream water chloride concentrations approach those of brackish waters for urban watersheds. Chloride is also highly persistent, with stream water chloride concentrations decreasing from the winter months and approaching baseline levels only in July. These baseline levels are greater than 100 mg Cl/l in the urban watersheds, suggesting high levels of chloride storage in soil and groundwater. Using road salt application rates and groundwater levels and chloride concentrations, we estimate the magnitude and residence time of the chloride pools in a number of watersheds across a gradient of urbanization. Our results suggest that the magnitude and residence time of chloride storage varies with urbanization and other factors. We show that summer baseflow concentrations do approach the EPA's chronic exposure guideline of 230 mg Cl/l, implying more work is needed to understand the in stream and downstream ecological effects of chloride.

  19. Lipids in Grape Roots in Relation to Chloride Transport 1

    PubMed Central

    Kuiper, Pieter J. C.

    1968-01-01

    A comparison was made between the lipids of the roots of 5 grape rootstocks which differ markedly in the extent to which they permit chloride accumulation in leaves. Monogalactose diglyceride concentration was directly related to chloride accumulation in the leaves of the 5 rootstocks. Phosphatidylcholine and phosphatidylethanolamine were inversely related to chloride accumulation. The variety with the highest chloride accumulation contained an unusually small amount of sterols. A striking negative correlation between content of lignoceric acid and chloride accumulation was observed. The lignoceric acid concentration ranged from 11.9% in the rootstock with the lowest chloride accumulation to 0.8% in the rootstock with the highest chloride accumulation. This fatty acid was found mainly in the phosphatidylcholine and the phosphatidylethanolamine lipid fractions. PMID:16656921

  20. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in each... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  1. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in each... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  2. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in each... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  3. Properties of a new liquid desiccant solution - Lithium chloride and calcium chloride mixture

    SciTech Connect

    Ertas, A.; Anderson, E.E.; Kiris, I. )

    1992-09-01

    Desiccants, broadly classified as solid and liquid desiccants, have the property of extracting and retaining moisture from air brought into contact with them. By using either type, moisture in the air is removed and the resulting dry air can be used for air-conditioning or drying purposes. Because of its properties, lithium chloride is the most stable liquid desiccant and has a large dehydration concentration (30% to 45%), but its cost is relatively high ($9.00-13.00 per kg). It is expected that lithium chloride will reduce the relative humidity to as low as 15%. Calcium chloride is the cheapest (45 cents per kg) and most readily available desiccant, but it has the disadvantage of being unstable depending on the air inlet conditions and the concentration of the desiccant in the solution. To stabilize calcium chloride and to decrease the high cost of lithium chloride, the two can be mixed in different weight combinations. The main objective of this research is to measure the physical properties of different combinations of this mixture such as density, viscosity, and vapor pressure which are necessary for analysis of heat and mass transfer in a packed tower desiccant-air contact system. The solubility of this new liquid desiccant under certain temperature-concentrations will also be studied.

  4. Solution-Derived, Chloride-Containing Minerals as a Waste Form for Alkali Chlorides

    SciTech Connect

    Riley, Brian J.; Crum, Jarrod V.; Matyas, Josef; McCloy, John S.; Lepry, William C.

    2012-10-01

    Sodalite [Na8(AlSiO4)6Cl2] and cancrinite [(Na,K)6Ca2Al6Si6O24Cl4] are environmentally stable, chloride-containing minerals and are a logical waste form option for the mixed alkali chloride salt waste stream that is generated from a proposed electrochemical separations process during nuclear fuel reprocessing. Due to the volatility of chloride salts at moderate temperatures, the ideal processing route for these salts is a low-temperature approach such as the sol-gel process. The sodalite structure can be easily synthesized by the sol-gel process; however, it is produced in the form of a fine powder with particle sizes on the order of 1–10 µm. Due to the small particle size, these powders require additional treatment to form a monolith. In this study, the sol-gel powders were pressed into pellets and fired to achieve > 90% of theoretical density. The cancrinite structure, identified as the best candidate mineral form in terms of waste loading capacity, was only produced on a limited basis following the sol-gel process and converted to sodalite upon firing. Here we discuss the sol-gel process specifics, chemical durability of select waste forms, and the steps taken to maximize chloride-containing phases, decrease chloride loss during pellet firing, and increase pellet densities.

  5. Identification of the different sources of chlorides in streams by regression analysis using chloride-discharge relationships

    SciTech Connect

    Albek, E.

    1999-12-01

    Chloride-discharge relationships at several stations on Turkish streams are investigated, both qualitatively and quantitatively, to identify natural and anthropogenic sources of chloride. Simple expressions are used to distinguish among sources. Linear regression analysis is conducted to estimate parameters of the models. Five groups of stations are distinguished respective to different sources of chloride and change of chloride concentration with stream discharge. Emphasis is placed on the identification of anthropogenic sources of chloride to aid in water pollution control strategies. The polluted Sakarya River and its primary tributary, the Porsuk Stream, are studied in detail to trace chloride behavior along the waterway and to assess the level of pollution from cities discharging to the streams. Among natural sources of chloride, evaporite sediment sources are examined in detail.

  6. Crystal structures of salicylideneguanylhydrazinium chloride and its copper(II) and cobalt(III) chloride complexes

    SciTech Connect

    Chumakov, Yu. M. Tsapkov, V. I.; Bocelli, G.; Antosyak, B. Ya.; Shova, S. G.; Gulea, A. P.

    2006-01-15

    The crystal structures of salicylideneguanylhydrazinium chloride hydrate hemiethanol solvate (I), salicylideneguanylhydrazinium trichloroaquacuprate(II) (II), and bis(salicylideneguanylhydrazino)cobalt(III) chloride trihydrate (III) are determined using X-ray diffraction. The structures of compounds I, II, and III are solved by direct methods and refined using the least-squares procedure in the anisotropic approximation for the non-hydrogen atoms to the final factors R = 0.0597, 0.0212, and 0.0283, respectively. In the structure of compound I, the monoprotonated molecules and chlorine ions linked by hydrogen bonds form layers aligned parallel to the (010) plane. In the structure of compound II, the salicylaldehyde guanylhydrazone cations and polymer chains consisting of trichloroaquacuprate(II) anions are joined by an extended three-dimensional network of hydrogen bonds. In the structure of compound III, the [Co(LH){sub 2}]{sup +} cations, chloride ions, and molecules of crystallization water are linked together by a similar network.

  7. Carcinogenicity and epidemiological profile analysis of vinyl chloride and polyvinyl chloride

    SciTech Connect

    Kalmaz, E.E.; Kalmaz, G.D.

    1984-03-01

    The carcinogenicity of vinyl chloride and polyvinyl chloride (VC/PVC) is reviewed with specific attention to the gaps in knowledge for risk estimation and epidemiological presentation of the available data. Although experimental studies have demonstrated the carcinogenicity and mutagenicity of VC/PVC in general, the epidemiologic studies available for review do not include an assessment of carcinogenic risk among humans exposed to these chemicals. This conclusion is based on the observation that the majority of cohort studies reviewed lacked sufficient statistical power because of small sample sizes. Further, in epidemiological studies, individuals were not followed over an adequate period of time during which cancer could become clinically manifest.

  8. Twenty years of fluorescence imaging of intracellular chloride

    PubMed Central

    Arosio, Daniele; Ratto, Gian Michele

    2014-01-01

    Chloride homeostasis has a pivotal role in controlling neuronal excitability in the adult brain and during development. The intracellular concentration of chloride is regulated by the dynamic equilibrium between passive fluxes through membrane conductances and the active transport mediated by importers and exporters. In cortical neurons, chloride fluxes are coupled to network activity by the opening of the ionotropic GABAA receptors that provides a direct link between the activity of interneurons and chloride fluxes. These molecular mechanisms are not evenly distributed and regulated over the neuron surface and this fact can lead to a compartmentalized control of the intracellular concentration of chloride. The inhibitory drive provided by the activity of the GABAA receptors depends on the direction and strength of the associated currents, which are ultimately dictated by the gradient of chloride, the main charge carrier flowing through the GABAA channel. Thus, the intracellular distribution of chloride determines the local strength of ionotropic inhibition and influences the interaction between converging excitation and inhibition. The importance of chloride regulation is also underlined by its involvement in several brain pathologies, including epilepsy and disorders of the autistic spectra. The full comprehension of the physiological meaning of GABAergic activity on neurons requires the measurement of the spatiotemporal dynamics of chloride fluxes across the membrane. Nowadays, there are several available tools for the task, and both synthetic and genetically encoded indicators have been successfully used for chloride imaging. Here, we will review the available sensors analyzing their properties and outlining desirable future developments. PMID:25221475

  9. The Structure of Nickel Chloride in the Ionic Liquid 1-Ethyl-3-methyl Imidazolium Chloride/Aluminum Chloride: X-ray Absorption Spectroscopy

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    The structure of anhydrous nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride and aluminum chloride has been investigated with extended X-ray absorption fine structure (EXAFS) in both Lewis acid and Lewis base solutions. The EXAFS data of NiCl{sub 2} {center_dot} 6H{sub 2}O crystals were also recorded and analyzed to demonstrate the difference file technique. The difference file technique is used to obtain the structural information for the very closely spaced coordination shells of chloride and oxygen in NiCl{sub 2} {center_dot} 6H{sub 2}O and they are found to agree very closely with the X-ray diffraction data. The difference file technique is then used to analyze the nickel chloride in the ionic liquid solutions. Even though anhydrous NiCl{sub 2} is more soluble in the basic solution than in the acidic solution, the EXAFS data show a single coordination of four chlorides in a tetrahedron around the nickel atom in the basic solution. In a weak acid solution, there are six chlorides in a single octahedral coordination shell around the nickel. However, in a strong acid solution, in addition to the octahedral chloride-coordination shell, there is a second coordination shell of eight aluminum atoms in the form of a simple cube.

  10. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Hyman, M.L.; Savolainen, J.E.

    1960-01-01

    A method is given for dissolving reactor fuel elements in which the uranium is associated with a relatively inert chromium-containing alloy such as stainless steel. An aqueous mixture of acids comprising 2 to 2.5 molar hydrochloric acid and 4 to 8 molar nitric acid is employed in dissolving the fuel element. In order io reduce corrosion in subsequent processing of the resulting solution, chloride values are removed from the solution by contacting it with concentrated nitric acid at an elevated temperature.

  11. Potentiometric determination of anhydrous aluminum chloride

    SciTech Connect

    Kofman, A.G.; Chernysh, G.V.; Vorozhtsov, G.N.

    1987-12-20

    Anhydrous aluminum chloride is a strong Lewis acid, widely used as a catalyst, in the synthesis and analysis of organic products. The aim of this article is to develop a potentiometric method of determining anhydrous AlCl/sub 3/. To estimate the validity of the results of the determination, use was made of French, Japanese, and Soviet samples of AlCl/sub 3/ with a known content of the main substance. The titration was performed in ethylene glycol. The procedure makes it possible to investigate the activity of AlCl/sub 3/ as a catalyst in different organic solvents

  12. Anodic Behavior of Alloy 22 in Calcium Chloride and in Calcium Chloride Plus Calcium Nitrate Brines

    SciTech Connect

    Evans, K J; Day, S D; Ilevbare, G O; Whalen, M T; King, K J; Hust, G A; Wong, L L; Estill, J C; Rebak, R B

    2003-05-13

    Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this work was to characterize the anodic behavior of Alloy 22 in concentrated calcium chloride (CaCl{sub 2}) brines and to evaluate the inhibitive effect of nitrate, especially to localized corrosion. Standard electrochemical tests such as polarization resistance and cyclic polarization were used. Results show that the corrosion potential of Alloy 22 was approximately -360 mV in the silver-silver chloride (SSC) scale and independent of the tested temperature. Cyclic polarization tests showed that Alloy 22 was mainly susceptible to localized attack in 5 M CaCl{sub 2} at 75 C and higher temperatures. The addition of nitrate in a molar ratio of chloride to nitrate equal to 10 increased the onset of localized corrosion to approximately 105 C. The addition of nitrate to the solution also decreased the uniform corrosion rate and the passive current of the alloy.

  13. Toxicity of vinyl chloride and poly(vinyl chloride): a critical review.

    PubMed Central

    Wagoner, J K

    1983-01-01

    In 1974, vinyl chloride (VC) was first reported in the open scientific literature to induce angiosarcoma of the liver both in humans and in animals. Additional research has now demonstrated the carcinogenicity of VC to other organs and at lower concentrations. The target organs for VC now clearly include the liver, brain and the lung, and probably the lymphohematopoietic system. The evidence for a carcinogenic risk has been extended to jobs associated with poly(vinyl chloride) exposure. Cases of liver angiosarcoma have been reported among individuals employed in PVC fabrication facilities and an epidemiological study has demonstrated a significant association between exposure to PVC dust and the risk of lung cancer mortality. Cases of angiosarcoma of the liver also have been reported among individuals living in near proximity to vinyl chloride-poly(vinyl chloride) plants. An association between PVC dust and pneumoconiosis also has been demonstrated. On the basis of findings, prudent control of PVC dust in the industrial setting is indicated. PMID:6360677

  14. Regulated trafficking of the CFTR chloride channel.

    PubMed

    Kleizen, B; Braakman, I; de Jonge, H R

    2000-08-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Whereas a key role of cAMP-dependent phosphorylation in CFTR-channel gating has been firmly established, more recent studies have provided clear evidence for the existence of a second level of cAMP regulation, i.e. the exocytotic recruitment of CFFR to the plasma membrane and its endocytotic retrieval. Regulated trafficking of the CFTR Cl- channel has sofar been demonstrated only in a subset of CFTR-expressing cell types. However, with the introduction of more sensitive methods to measure CFTR cycling and submembrane localization, it might turn out to be a more general phenomenon that could contribute importantly to both the regulation of CFTR-mediated chloride transport itself and to the regulation of other transporters and CFTR-modulated cellular functions. This review aims to summarize the present state of knowledge regarding polarized and regulated CFTR trafficking and endosomal recycling in epithelial cells, to discuss present gaps in our understanding of these processes at the cellular and molecular level, and to consider its possible implications for cystic fibrosis. PMID:11001491

  15. Open cycle lithium chloride cooling system

    NASA Astrophysics Data System (ADS)

    Lenz, T. G.; Loef, G. O. G.; Iyer, R.; Wenger, J.

    1983-05-01

    A lithium chloride open cycle absorption chiller has been designed, built and tested. Solution reconcentration takes place in a small counter current packed column supplied with solar heated air. Removal of noncondensable gases that enter the chiller dissolved in the strong solution and the make-up refrigerant streams is accomplished by a liquid-jet ejector and a small vacuum pump. Cooling capacities approaching 1.4 tons and COP levels of 0.58 have been achieved at non-optimum operating conditions. Test results from preliminary system operation suggest that mass transfer processes in both the packed column reconcentrator and the absorber are controlled by concentration gradients in the lithium chloride solution. Liquid phase controlled mass transfer dictates an operating strategy different from the previously assumed gas phase controlled process to obtain maximum rates of evaporation in the packed column. Determination of optimal operating conditions leading to decreased electrical power consumption and improved cooling capacity and coefficient of performance will require further analysis and testing.

  16. Enrofloxacin hydro­chloride dihydrate

    PubMed Central

    Miranda-Calderón, Jorge E.; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-01-01

    The asymmetric unit of the title compound, C19H23FN3O3 +·Cl−·2H2O [systematic name: 4-(3-carb­oxy-1-cyclo­propyl-6-fluoro-4-oxo-1,4-di­hydro­quin­o­lin-7-yl)-1-ethyl­piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol­ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo­propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra­molecular O—H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O—H⋯Cl, N—H⋯Cl and O—H⋯O hydrogen bonds, and a π–π inter­action between the benzene rings [centroid–centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array. PMID:24826167

  17. Radiolytic preparation of anhydrous tin (2) chloride

    NASA Technical Reports Server (NTRS)

    Philipp, W. H.; Marsik, S. J.

    1973-01-01

    Anhydrous tin (2) chloride (SnCl2) is prepared by radiolysis with high energy electrons of a tin (4) chloride (SnCl4) solution in heptane. The SnCl4 is reduced to insoluble SNCl2. The energy yield, G(SnCl2), molecules of SnCl2, produced per 100 eV, increases with SnCl4 concentration from 1.6 at 0.15 M SnCl4 to 3.1 at 3.0 M SnCl4. Other parameters such as temperature total dose and beam current have little influence on G(SnCl2). The method may be used to prepare other metal halides if the higher valence, more covalent metal halide is soluble in aliphatic hydrocarbons and the lower more ionic metal halide is insoluble. The reaction mechanism is discussed; the radiolysis of both heptane and SnCl4 is involved. At high SnCl4 concentration G(SnCl2) appears to be limited by the yield of SnC13 radicals.

  18. The sodium chloride primary pressure gauge

    NASA Technical Reports Server (NTRS)

    Ruoff, A. L.; Chhabildas, L. C.

    1976-01-01

    The failure of a central force model for sodium chloride is discussed. It is noted that it does not closely satisfy the Cauchy conditions at low temperatures, and that it fails the central force requirement of the Love condition. The available shock data for sodium chloride and its analysis is examined, and two reasons why the Hugoniot transformation pressure is likely to be less than 231 kbar are discussed. The important (but unjustified) theoretical assumptions made in converting Hugoniot to isothermal data is discussed; it is noted that serious error can enter for very large pressures for a given material and that at such high pressures the isothermal data should thus be considered only semiquantitative even if the Hugoniot data itself is accurate. An alternate method of estimating the isothermal transformation pressure from the Hugoniot transformation pressure is used. This method is based on the temperature derivative of the transformation pressure. On this basis it is concluded that an upper bound for the isothermal transformation of NaCl (to a CsCl-type structure) at room temperature is 257 kbar; it is noted that the actual value may be considerably less than this.

  19. Antagonists for acute oral cadmium chloride intoxication

    SciTech Connect

    Basinger, M.A.; Jones, M.M.; Holscher, M.A.; Vaughn, W.K.

    1988-01-01

    An examination has been carried out on the relative efficacy of a number of chelating agents when acting as antagonists for oral cadmium chloride intoxication in mice. The compounds were administered orally after the oral administration of cadmium chloride at 1 mmol/kg. Of the compounds examined, several were useful in terms of enhancing survival, but by far the most effective in both enhancing survival and leaving minimal residual levels of cadmium in the liver and the kidney, was meso-2,3-dimercaptosuccinic acid (DMSA). Several polyaminocarboxylic acids also enhanced survival. The most effective of these in reducing liver and kidney levels of cadmium were diethylenetriaminepentaacetic acid (DTPA), trans-1,2-diaminocyclohexane-N,N,N'N'-tetraacetic acid (CDTA), and triethylenetetraminehexaacetic acid (TTHA). D-Penicillamine (DPA) was found to promote survival but also led to kidney cadmium levels higher than those found in the controls. Sodium 2,3-dimercaptopropane-1-sulfonate (DMPS) was as effective in promoting survival as DMSA but left levels of cadmium in the kidney and liver that were approximately four times greater than those found with DMSA.

  20. Purification of aqueous plutonium chloride solutions via precipitation and washing.

    SciTech Connect

    Stroud, M. A.; Salazar, R. R.; Abney, Kent David; Bluhm, E. A.; Danis, J. A.

    2003-01-01

    Pyrochemical operations at Los Alamos Plutonium Facility (TA-55) use high temperature melt s of calcium chloride for the reduction of plutonium oxide to plutonium metal and hi gh temperature combined melts of sodium chloride and potassium chloride mixtures for the electrorefining purification of plutonium metal . The remaining plutonium and americium are recovered from thes e salts by dissolution in concentrated hydrochloric acid followed by either solvent extraction or io n exchange for isolation and ultimately converted to oxide after precipitation with oxalic acid . Figur e 1 illustrates the current aqueous chloride flow sheet used for plutonium processing at TA-55 .

  1. On Barium Oxide Solubility in Barium-Containing Chloride Melts

    NASA Astrophysics Data System (ADS)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V.

    2016-08-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl2-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl2-MCl systems.

  2. VOLATILE CHLORIDE PROCESS FOR THE RECOVERY OF METAL VALUES

    DOEpatents

    Hanley, W.R.

    1959-01-01

    A process is presented for recovering uranium, iron, and aluminum from centain shale type ores which contain uranium in minute quantities. The ore is heated wiih a chlorinating agent. such as chlorine, to form a volatilized stream of metal chlorides. The chloride stream is then passed through granular alumina which preferentially absorbs the volatile uranium chloride and from which the uranium may later be recovered. The remaining volatilized chlorides, chiefly those of iron and aluminum, are further treated to recover chlorine gas for recycle, and to recover ferric oxide and aluminum oxide as valuable by-products.

  3. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    PubMed

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  4. Effect of application of ammonium chloride and calcium chloride on alfalfa cation-anion content and yield.

    PubMed

    Goff, J P; Brummer, E C; Henning, S J; Doorenbos, R K; Horst, R L

    2007-11-01

    A major factor predisposing the cow to periparturient hypocalcemia, or milk fever, is being fed a prepartum ration with a high dietary cation-anion difference (DCAD). The DCAD can be favorably altered to prevent milk fever by decreasing K and Na or increasing Cl and S in forages for cows in late gestation. The objective of this study was to test the hypothesis that application of Cl to alfalfa could increase Cl in forage, thereby lowering DCAD. We conducted a field experiment at 2 Iowa locations in which established plots of alfalfa were treated in April 2001 with 0, 56, 112, or 168 kg of Cl/ha using ammonium chloride, calcium chloride, or a mix of the 2 sources with equal amounts of chloride coming from each source. Plots were harvested 4 times in 2001 and once in 2002 and plant tissue analyzed for mineral composition. Applying chloride from either source once in the spring resulted in increased plant chloride content over all 4 cuttings for that year. Averaged across both locations, chloride levels were elevated from 0.52% in control plots to 0.77, 0.87, and 0.89% Cl in plots treated with 56, 112, and 168 kg of Cl/ha, respectively. Chloride application had no effect on plant potassium, sodium, calcium, magnesium, or phosphorus. These results suggest chloride application can elevate chloride content and lower DCAD values of alfalfa, and also maintain crop yield. PMID:17954756

  5. Developmental toxicity of copper chloride, methylene chloride, and 6-aminonicotinamide to embryos of the grass shrimp Palaemonetes pugio

    SciTech Connect

    Rayburn, J.R.; Fisher, W.S.

    1999-05-01

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, copper chloride, and 6-aminonicotinamide, three known teratogenic chemicals. Two exposure periods were used, 4 d and 12 d, and both periods extended through hatching. The average 4-d LC50 values for methylene chloride, copper chloride, and 6-aminonicotinamide were 0.071% v/v, 1.82 mg/L, and 0.21 mg/ml, respectively. The average 12-d LC50 values for methylene chloride, copper chloride, and 6-aminonicotinamide were 0.031% v/v, 1.44 mg/L, and 0.057 mg/ml, respectively. Eye malformations were observed with embryos exposed to concentrations greater than 3 mg/L copper chloride or greater than 0.07% v/v methylene chloride. Very few abnormalities were observed in embryos exposed to 6-aminonicotinamide. Abnormal larval development was found with exposure to copper chloride at concentrations greater than 1 mg/L. The sensitivity and low variability found here further supports the development of these relatively simple methods using grass shrimp embryos. Establishment of sublethal developmental endpoints warrants further investigation because of their potential correspondence to mechanisms of toxic action.

  6. Reaction of. cap alpha. ,. cap alpha. ,omega-trihydroperfluoroalkanols with thionyl chloride

    SciTech Connect

    Krolevets, A.A.; Ragulin, L.I.; Popov, A.G.

    1987-06-10

    The effect of catalysts on the reaction of thionyl chloride with ..cap alpha..,..cap alpha..,omega-trihydroperfluoroalkanols was investigated. It was shown that the use of calcium chloride, aluminum chloride, ferric chloride, and magnesium chloride as catalysts makes it possible to obtain polyfluoroalkyl chlorosulfites and bis(polyfluoroalkyl) sulfites with good yields.

  7. Lithium chloride and avoidance of novel places.

    PubMed

    Kurz, E M; Levitsky, D A

    1983-06-01

    Rats were exposed to a distinctive chamber (chamber A, part of a two-chamber apparatus), which was novel for half of the rats but familiar for the other half. Each rat was subsequently injected with lithium chloride or saline. In a test trial conducted 24 hr later, all rats were given a choice between chamber A and a second chamber (B), which was novel for all rats. The main result was that the group made familiar with chamber A and then given lithium showed a significant preference for that side or an avoidance of the novel side, a "spatial neophobia." A second experiment confirmed the spatial neophobia effect and demonstrated that it was not dependent on the particular conditioning procedure used in the first experiment. The spatial neophobia effect was related to similar effects in the taste aversion literature, and to the results of research on lithium-induced decreases in exploratory behavior. PMID:6307325

  8. Characterization of directionally solidified lead chloride

    NASA Astrophysics Data System (ADS)

    Singh, Narsingh Bahadur; Duval, W. M. B.; Rosenthal, B. N.

    1988-06-01

    A complete analysis has been carried out on directionally solidified lead(II) chloride material. Purification by directional freezing consistently produced high purity material suitable for subsequent growth of single crystals. It was observed that silicon, magnesium, halogens, sulfur and phosphorous were the hardest impurities to remove from the supplied material. Direct photographic observations of the solid-liquid interface were taken at several values of G/ v ratios (denoting the temperature gradient and the translation velocity, respectively) to study the morphology of the interface and optimize the growth conditions. The solid-liquid interface morphology varied from a smooth convex shape to dendritic as the G/ v ratio decreased. Single crystals subsequently grown from the material purified by the present method showed no optical distortion, exhibited a transmission range from 0.30 to 20 μm, and displayed extremely low beam scattering.

  9. o-Phenyl­enediaminium chloride nitrate

    PubMed Central

    Soudani, Sarra; Kefi, Riadh; Jelsch, Christian; Wenger, Emmanuel; Ben Nasr, Cherif

    2013-01-01

    In the title mol­ecular salt, C6H10N2 2+·NO3 −·Cl−, the complete cation is generated by a crystallographic mirror plane. The complete nitrate ion is also generated by reflection, with the N atom and one O atom lying on the mirror plane; the chloride ion also lies on the reflection plane. In the crystal, the components are linked by N—H⋯Cl and N—H⋯(N,O) hydrogen bonds, forming (001) layers with the benzene rings projecting into the inter­layer regions. The layers are linked by weak C—H⋯O hydrogen bonds, generating a three-dimensional network. PMID:23634127

  10. Unsteady growth of ammonium chloride dendrites

    NASA Astrophysics Data System (ADS)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.

    2016-02-01

    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=сΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  11. Dynamics of vitreous and molten zinc chloride

    SciTech Connect

    Price, D.L.; Saboungi, M.L.; Susman, S.; Volin, K.J. ); Wright, A.C. . J.J. Thomson Physical Lab.)

    1991-09-01

    The dynamics of vitreous and molten zinc chloride have been studied with inelastic neutron scattering at the Intense Pulsed Neutron Source. The results are analyzed in terms of the scattering function S(Q,E) and the effective vibrational density of states G(E). The vibrational spectra of both glass and liquid are dominated by broad features centered at 15 and 35 MeV which are identified with F{sub 2} modes of ZnCl{sub 4}{sup 2{minus}} tetrahedra. The other two normal modes are not observed because of inadequate resolution and broadening and overlap resulting from coupling between tetrahedra. The behavior of ZnCl{sub 2} is contrasted with other tetrahedrally coordinated glasses that have been studied with the same technique. 15 refs,. 5 figs., 1 tab.

  12. Poly(vinyl chloride) processes and products.

    PubMed Central

    Wheeler, R N

    1981-01-01

    Poly(vinyl chloride) resins are produced by four basic processes: suspension, emulsion, bulk and solution polymerization. PVC suspensions resins are usually relatively dust-free and granular with varying degrees of particle porosity. PVC emulsion resins are small particle powders containing very little free monomer. Bulk PVC resins are similar to suspension PVC resins, though the particles tend to be more porous. Solution PVC resins are smaller in particle size than suspension PVC with high porosity particles containing essentially no free monomer. The variety of PVC resin products does not lend itself to broad generalizations concerning health hazards. In studying occupational hazards the particular PVC process and the product must be considered and identified in the study. PMID:7333230

  13. Lead electrowinning in an acid chloride medium

    NASA Astrophysics Data System (ADS)

    Expósito, E.; Iniesta, J.; González-García, J.; Montiel, V.; Aldaz, A.

    The results of an investigation of the electrowinning of lead employing a chloride medium are reported. The electro-deposition lead reaction was studied by voltammetric methods and scanning electron microscope (SEM) microphotographs of the electro-deposited lead were taken. The effects of current density, temperature, catholyte flow and H + concentration were investigated at laboratory scale to optimise operating conditions in order to found adequate values for industrial purposes of the parameters energetic cost and production. For a working current density of 100 mA/cm 2 the current efficiency, energy consumption and production were 90%, 1.32 kW h/kg Pb and 83.4 kg Pb/m 2 per day, respectively.

  14. Pharmacodynamics of benzyl chloride in rats.

    PubMed

    Saxena, S; Abdel-Rahman, M S

    1989-09-01

    In today's world of high industrialization, toxicity and pollution have become common terms of references. Both laymen and experts are becoming increasingly concerned about various health hazards created by occupational and industrial wastes dumped in and around public places. Benzyl chloride (BCl) was one of the chemicals dumped by Hooker Chemicals in Love Canal, N.Y. Benzyl chloride (BCl) is extensively used in industry in the manufacture of dyes, perfumes, resins, and synthetic tannins. It has been found at various dump sites and industrial wastes, which has led to potential hazards to health. This study was conducted to investigate the pharmacodynamics of BCl in rats. Rats were given 14C-BCl in corn oil by gavage. The peak plasma level was reached at 30 min and began to decline. BCl elimination pattern follows a two compartment model. The distribution half-life (alpha-phase) was 1.3 hr while the half-life of elimination (beta-phase) was 58.53 hr. Distribution studies after 48 hr of BCl administration revealed that the concentration of radioisotopes was highest in the stomach, gastric content, ileum, and duodenum followed by liver, adrenal, bone marrow, whole blood, pancreas, lung, esophagus, skin, kidney, heart, thymus, fat, testes, spleen, brain, and carcass. Approximately 76% of the initial dose was excreted by kidney during the 72 hr studies. About 7% was detected in expired air as 14CO2, while less than 1.3% was present as 14C-BCl or 14C-BCl metabolites in expired air during 72 hr. Metabolism studies revealed that S-benzyl-N-acetyl cysteine, benzyl alcohol, and benzaldehyde were the metabolites present in the urine.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2802671

  15. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    ERIC Educational Resources Information Center

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  16. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  17. Aerobic biodegradation of vinyl chloride in groundwater samples

    SciTech Connect

    Davis, J.W.; Carpenter, C.L. )

    1990-12-01

    Studies were conducted to examine the biodegradation of {sup 14}C-labeled vinyl chloride in samples taken from a shallow aquifer. Under aerobic conditions, vinyl chloride was readily degraded, with greater than 99% of the labeled material being degraded after 108 days and approximately 65% being mineralized to {sup 14}CO{sub 2}.

  18. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  19. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  20. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  1. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  2. PREPARATION OF ANHYDROUS CERIUM CHLORIDE, URANIUM BROMIDE OR PLUTONIUM FLUORIDE

    DOEpatents

    Marmon, K.M.; Wichers, E.

    1961-05-01

    A process is given for preparing anhydrous metal halides and converting metal oxalates to anhydrous metal halides which are free from oxyhalides. In accordance with one embodiment of the invention, cerous chloride is prepared by passing hydrogen chloride gas over hydrated cerous oxalate below lOO deg C until no more gas is absorbed and then continuing the treatmert at higher temperatures.

  3. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride...

  4. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride...

  5. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride solution. A containment system (cargo tank...

  6. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride...

  7. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride...

  8. HEALTH ASSESSMENT DOCUMENT FOR VINYLIDENE CHLORIDE. FINAL REPORT

    EPA Science Inventory

    Vinylidene chloride is a highly reactive, flammable, clear colorless liquid. In the absence of chemical inhibitors, it can produce violently explosive, complex peroxides. The estimated, ambient air level of vinylidene chloride in urban-suburban areas of the United States is 20 mi...

  9. Suzuki Coupling of Potassium Cyclopropyl- and Alkoxymethyltrifluoroborates with Benzyl Chlorides

    PubMed Central

    Colombel, Virginie; Rombouts, Frederik; Oehlrich, Daniel; Molander, Gary A.

    2012-01-01

    Efficient Csp3-Csp3 Suzuki couplings have been developed with both potassium cyclopropyl- and alkoxymethyltrifluoroborates. Moderate to good yields have been achieved in the cross-coupling of potassium cyclopropyltrifluoroborate with benzyl chlorides possessing electron-donating or electron-withdrawing substituents. Benzyl chloride was also successfully cross-coupled to potassium alkoxymethyltrifluoroborates derived from primary, secondary, and tertiary alcohols. PMID:22390789

  10. Slow Sodium: An Oral Slowly Released Sodium Chloride Preparation

    PubMed Central

    Clarkson, E. M.; Curtis, J. R.; Jewkes, R. J.; Jones, B. E.; Luck, V. A.; de Wardener, H. E.; Phillips, N.

    1971-01-01

    The use of a slowly released oral preparation of sodium chloride is described. It was given to patients and athletes to treat or prevent acute and chronic sodium chloride deficiency. Gastrointestinal side effects were not encountered after the ingestion of up to 500 mEq in one day or 200 mEq in 10 minutes. PMID:5569979

  11. ASSOCIATION BETWEEN BIRTH DEFECTS AND EXPOSURE TO AMBIENT VINYL CHLORIDE

    EPA Science Inventory

    To better define the association between exposure to vinyl chloride monomer (VCM) and the occurrence of birth defects, this epidemiological study was made in Shawinigan, Quebec, Canada, where a vinyl chloride polymerization plant has operated since 1943. Birth-defect rates in Sha...

  12. 21 CFR 520.260 - n-Butyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... a dosage level of 1 capsule per 21/2 pounds body weight. Capsules containing 884 milligrams of n... 21 Food and Drugs 6 2014-04-01 2014-04-01 false n-Butyl chloride. 520.260 Section 520.260 Food and..., FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride....

  13. 21 CFR 520.260 - n-Butyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... a dosage level of 1 capsule per 21/2 pounds body weight. Capsules containing 884 milligrams of n... 21 Food and Drugs 6 2013-04-01 2013-04-01 false n-Butyl chloride. 520.260 Section 520.260 Food and..., FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride....

  14. Suzuki coupling of potassium cyclopropyl- and alkoxymethyltrifluoroborates with benzyl chlorides.

    PubMed

    Colombel, Virginie; Rombouts, Frederik; Oehlrich, Daniel; Molander, Gary A

    2012-03-16

    Efficient Csp(3)-Csp(3) Suzuki couplings have been developed with both potassium cyclopropyl- and alkoxymethyltrifluoroborates. Moderate to good yields have been achieved in the cross-coupling of potassium cyclopropyltrifluoroborate with benzyl chlorides possessing electron-donating or electron-withdrawing substituents. Benzyl chloride was also successfully cross-coupled to potassium alkoxymethyltrifluoroborates derived from primary, secondary, and tertiary alcohols. PMID:22390789

  15. Slow sodium: an oral slowly released sodium chloride preparation.

    PubMed

    Clarkson, E M; Curtis, J R; Jewkes, R J; Jones, B E; Luck, V A; de Wardener, H E; Phillips, N

    1971-09-11

    The use of a slowly released oral preparation of sodium chloride is described. It was given to patients and athletes to treat or prevent acute and chronic sodium chloride deficiency. Gastrointestinal side effects were not encountered after the ingestion of up to 500 mEq in one day or 200 mEq in 10 minutes. PMID:5569979

  16. TOXICOLOGY OF MONO- AND DI-ALKYLTIN CHLORIDES.

    EPA Science Inventory

    Mono- and di-alkyltin chlorides are reactive compounds used in the production of stabilizers for polyvinyl chloride (PVC) plastics, primarily used for water distribution pipes. Health effects data were compiled or developed by the manufacturers for the EPA's HPV Challenge progra...

  17. TOXICOLOGY OF MONO- AND DI-ALKYLTIN CHLORIDES

    EPA Science Inventory

    Mono- and di-alkyltin chlorides are reactive compounds used in the production of stabilizers for polyvinyl chloride (PVC) plastics, primarily used for water distribution pipes. Health effects data were compiled or developed by the manufacturers for the EPA's HPV Challenge progra...

  18. An investigation of nonchlorinated substitute cleaning agents for methylene chloride

    SciTech Connect

    Salerno, R.F.; Dichiaro, J.V.; Egleston, E.E.; Koons, J.W.

    1990-01-29

    Four nonchlorinated solvents, N-methylpyrrolidinone (NMP), arco solv DPM, Bio Act EC-7, and ethyl lactate, were evaluated as substitutes for the methylene chloride used as a cleaning solvent in a ceramic component production process. NMP showed a cleaning efficiency that was superior to the other nonchlorinated solvents and to methylene chloride. 6 figs., 2 tabs.

  19. Molybdenum In Cathodes Of Sodium/Metal Chloride Cells

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Attia, Alan I.; Halpert, Gerald

    1992-01-01

    Cyclic voltammetric curves of molybdenum wire in NaAlCl4 melt indicate molybdenum chloride useful as cathode material in rechargeable sodium/metal chloride electrochemical cells. Batteries used in electric vehicles, for electric-power load leveling, and other applications involving high energy and power densities.

  20. The electrowinning of copper from a cupric chloride solution

    NASA Astrophysics Data System (ADS)

    Lin, H. K.; Wu, X. J.; Rao, P. D.

    1991-08-01

    In this work, the Eh pCl diagram of the CuCl-H2O system was established, and the kinetics of copper dissolution in cupric chloride solution were studied with an emphasis on possible difficulties that may occur during copper electrowinning. The results were used to guide an investigation of copper electrowinning from cupric chloride solution.

  1. Fast atom bombardment mass spectrometric studies of the aluminim chloride/n-butylpyridinium chloride molten salt

    SciTech Connect

    Ackermann, B.L.; Tsarbopoulos, A.; Allison, J.

    1985-07-01

    A fast atom bombardment (FAB) mass spectrometric analysis of the aluminum chloride N-n-butyl-pyridinium chloride molten salt system (AlCl/sub 3//BPCl) which is an ionic (ion-paired) liquid formed by mixing its two solid components, AlCl/sub 3/ and BPCl is reported. This system has received considerable attention recently since it is a melt at room temperature in contrast to the more commonly studied molten salt systems of the type AlCl/sub 3//MX (M is an alkali metal), which exist as melts at elevated temperatures (greater than or equal to150/sup 0/C). Results for the positive ions obtained from fast atom bombardment of a series of AlCl/sub 3//BPCl mixtures varying in composition are presented. The data obtained by FAB-MS are then discussed in light of the results previously obtained by other analytical techniques commonly used to characterize molten salts. 18 references, 2 figures.

  2. Electrochemical and spectroscopic studies of sulfur in aluminum chloride-N-(n-butyl)pyridinium chloride

    SciTech Connect

    Marassi, R.; Laher, T.M.; Mamantov, G.; Trimble, D.S.

    1985-07-01

    The behavior of sulfur in aluminum chloride-N-(n-butyl)pyridinium chloride (AlCl/sub 3/-BPC) was studied using Raman spectroscopy and electrochemical techniques. In basic (BPC-rich) melts, sulfur can be reduced to sulfide, probably in the form of an AlSCl-like species. No oxidation to positive oxidation states of sulfur is observed in basic melts. In acidic (AlCl/sub 3/-rich) melts, sulfur can be oxidized to S(I) and eventually to S(IV), which is only stabl in the melt for short periods of time. No reduction to sulfide-like species or formation of low oxidation states is observed in acidic melts.

  3. Zirconium and hafnium tetrachloride separation by extractive distillation with molten zinc chloride lead chloride solvent

    SciTech Connect

    McLaughlin, D.F.; Stoltz, R.A.

    1988-04-12

    In an extractive distillation method for separating hafniuim tetrachloride from zirconium tetrachloride of the type wherein a mixture of zirconium and hafnium tetrachlorides is introduced into an extractive distillation column, which extractive distillation column has a reboiler connected at the bottom and a reflux condenser connected at the top and wherein a molten salt solvent is circulated into the reflux condenser and through the column to provide a liquid phase, and wherein molten salt solvent containing zirconium tetrachloride is taken from the reboiler and run through a stripper to remove zirconium tetrachloride product from the molten salt solvent and the stripped molten salt solvent is returned to the reflux condenser and hafnium tetrachloride enriched vapor is taken as product from the reflux condenser, the improvement is described comprising: the molten salt having a composition of at least 30 mole percent zinc chloride and at least 10 mole percent of lead chloride.

  4. Determination of the heat capacities of Lithium/BCX (bromide chloride in thionyl chloride) batteries

    NASA Technical Reports Server (NTRS)

    Kubow, Stephen A.; Takeuchi, Kenneth J.; Takeuchi, Esther S.

    1989-01-01

    Heat capacities of twelve different Lithium/BCX (BrCl in thionyl chloride) batteries in sizes AA, C, D, and DD were determined. Procedures and measurement results are reported. The procedure allowed simple, reproducible, and precise determinations of heat capacities of industrially important Lithium/BCX cells, without interfering with performance of the cells. Use of aluminum standards allowed the accuracy of the measurements to be maintained. The measured heat capacities were within 5 percent of calculated heat capacity values.

  5. Chloride contamination of concrete by interaction with PVC combustion gases

    SciTech Connect

    Climent-Llorca, M.A.; Viqueira-Perez, E.; Vera-Almenar, G. de; Lopez-Atalaya, M.M.

    1998-02-01

    Chloride contamination of concrete by interaction with PVC combustion gases has been studied in a small-scale testing chamber, which allows simulating the conditions probably prevailing in PVC fires of different magnitude through variation of the quotient between mass of burnt PVC and exposed concrete surface (PVC/S). In all cases, a steep gradient of chloride concentration with depth is found after the fire: most chloride is detected in the outermost layer at depths below 5 mm. Surface chloride contents (within 5 mm) for prestressed and reinforced concretes, tested with a high (PVC/S) ratio, are as high as 2.5 and 5% by weight of cement, respectively. Chloride concentrations in concrete near the steels are below the corrosion thresholds after the fire, but they can rise by diffusion to values able to induce rebar corrosion, especially if concrete is exposed to a humid atmosphere.

  6. Atmospheric corrosion and chloride deposition on metal surfaces

    SciTech Connect

    Matthes, Steven A.; Holcomb, Gordon R.; Cramer, Stephen D.; Covino, Bernard S., Jr.; Bullard, Sophie J.

    2004-01-01

    Atmospheric corrosion and chloride deposition on metal surfaces was studied at an unpolluted coastal (marine) site, an unpolluted rural inland site, and a polluted urban site. Chloride deposition by both wet (precipitation) and dry deposition processes over a multi-year period was measured using ion chromatography analysis of incident precipitation and precipitation runoff from the surface of metal samples. Chloride deposition was measured on zinc, copper, lead, mild steel, and non-reactive blank panels, as well as two panels coated with thermal-sprayed zinc alloys. Chloride deposition measured by runoff chemistry was compared with chloride deposition measurements made by the ASTM wet candle technique. Corrosion mass loss as a function of distance from the ocean is presented for copper and mild steel in bold exposures on the west coast.

  7. A method for synthesizing pollucite from chabazite and cesium chloride

    SciTech Connect

    Pereira, Candido

    1997-08-11

    A method is described for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700 C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite.

  8. Apparatus and method for making metal chloride salt product

    DOEpatents

    Miller, William E.; Tomczuk, Zygmunt; Richmann, Michael K.

    2007-05-15

    A method of producing metal chlorides is disclosed in which chlorine gas is introduced into liquid Cd. CdCl.sub.2 salt is floating on the liquid Cd and as more liquid CdCl.sub.2 is formed it separates from the liquid Cd metal and dissolves in the salt. The salt with the CdCl.sub.2 dissolved therein contacts a metal which reacts with CdCl.sub.2 to form a metal chloride, forming a mixture of metal chloride and CdCl.sub.2. After separation of bulk Cd from the salt, by gravitational means, the metal chloride is obtained by distillation which removes CdCl.sub.2 and any Cd dissolved in the metal chloride.

  9. Metabolism of hexadecyltrimethylammonium chloride in Pseudomonas strain B1.

    PubMed Central

    van Ginkel, C G; van Dijk, J B; Kroon, A G

    1992-01-01

    A bacterium (strain B1) utilizing hexadecyltrimethylammonium chloride as a carbon and energy source was isolated from activated sludge and tentatively identified as a Pseudomonas sp. This bacterium only grew on alkyltrimethylammonium salts (C12 to C22) and possible intermediates of hexadecyltrimethylammonium chloride breakdown such as hexadecanoate and acetate. Pseudomonas strain B1 did not grow on amines. Simultaneous adaptation studies suggested that the bacterium oxidized only the alkyl chain of hexadecyltrimethylammonium chloride. This was confirmed by the stoichiometric formation of trimethylamine from hexadecyltrimethylammonium chloride. The initial hexadecyltrimethylammonium chloride oxygenase activity, measured by its ability to form trimethylamine, was NAD(P)H and O2 dependent. Finally, assays of aldehyde dehydrogenase, hexadecanoyl-coenzyme A dehydrogenase, and isocitrate lyase in cell extracts revealed the potential of Pseudomonas strain B1 to metabolize the alkyl chain via beta-oxidation. PMID:1444422

  10. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, Candido

    1999-01-01

    A method for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700.degree. C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite.

  11. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, C.

    1999-02-23

    A method is described for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method is described for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700 C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite. 3 figs.

  12. Monoclonal Antibodies to the Apical Chloride Channel in Necturus Gallbladder Inhibit the Chloride Conductance

    NASA Astrophysics Data System (ADS)

    Finn, Arthur L.; Tsai, Lih-Min; Falk, Ronald J.

    1989-10-01

    Monoclonal antibodies raised by injecting Necturus gallbladder cells into mice were tested for their ability to inhibit the apical chloride conductance induced by elevation of cellular cAMP. Five of these monoclonal antibodies bound to the apical cells, as shown by indirect immunofluorescence microscopy, and inhibited the chloride conductance; one antibody that bound only to subepithelial smooth muscle, by indirect immunofluorescence microscopy, showed no inhibition of chloride transport. The channel or a closely related molecule is present in the membrane whether or not the pathway is open, since, in addition to inhibiting the conductance of the open channel, the antibody also bound to the membrane in the resting state and prevented subsequent opening of the channel. The antibody was shown to recognize, by ELISA, epitopes from the Necturus gallbladder and small intestine. Finally, by Western blot analysis of Necturus gallbladder homogenates, the antibody was shown to recognize two protein bands of Mr 219,000 and Mr 69,000. This antibody should permit isolation and characterization of this important ion channel.

  13. Methyl chloride emissions from halophyte leaf litter: dependence on temperature and chloride content.

    PubMed

    Derendorp, Leonie; Wishkerman, Asher; Keppler, Frank; McRoberts, Colin; Holzinger, Rupert; Röckmann, Thomas

    2012-04-01

    Methyl chloride (CH(3)Cl) is the most abundant natural chlorine containing compound in the atmosphere, and responsible for a significant fraction of stratospheric ozone destruction. Understanding the global CH(3)Cl budget is therefore of great importance. However, the strength of the individual sources and sinks is still uncertain. Leaf litter is a potentially important source of methyl chloride, but factors controlling the emissions are unclear. This study investigated CH(3)Cl emissions from leaf litter of twelve halophyte species. The emissions were not due to biological activity, and emission rates varied between halophyte species up to two orders of magnitude. For all species, the CH(3)Cl emission rates increased with temperature following the Arrhenius relation. Activation energies were similar for all investigated plant species, indicating that even though emissions vary largely between plant species, their response to changing temperatures is similar. The chloride and methoxyl group contents of the leaf litter samples were determined, but those parameters were not significantly correlated to the CH(3)Cl emission rate. PMID:22225707

  14. Calibration of the On-Line Aerosol Monitor (OLAM) with ammonium chloride and sodium chloride aerosols

    SciTech Connect

    Brockmann, J.E.; Lucero, D.A.; Romero, T.; Pentecost, G.

    1993-12-01

    The On-Line Aerosol Monitor (OLAM) is a light attenuation device designed and built at the Idaho National Engineering Laboratory (INEL) by EG&G Idaho. Its purpose is to provide an on-line indication of aerosol concentration in the PHEBUS-FP tests. It does this by measuring the attenuation of a light beam across a tube through which an aerosol is flowing. The OLAM does not inherently give an absolute response and must be calibrated. A calibration has been performed at Sandia National Laboratories` (SNL) Sandia Aerosol Research Laboratory (SARL) and the results are described here. Ammonium chloride and sodium chloride calibration aerosols are used for the calibration and the data for the sodium chloride aerosol is well described by a model presented in this report. Detectable instrument response is seen over a range of 0.1 cm{sup 3} of particulate material per m{sup 3} of gas to 10 cm{sup 3} of particulate material per m{sup 3} of gas.

  15. [Analysis and stability of suxamethonium chloride. 2: Study of various factors in the stability of suxamethonium chloride injection solutions].

    PubMed

    Kottke, D; Döge, G; Pohloudek-Fabini, R

    1983-06-01

    The packing material (glass ampoules and plastic disposable syringes) and the degree of purity of the active agent do not affect the stability of injectable suxamethonium chloride solutions. In contrast to this, the stability was markedly improved by lowering the temperature of storage. Injectable suxamethonium chloride solutions may be stored in plastic disposable syringes. PMID:6611640

  16. 40 CFR 415.380 - Applicability; description of the ferric chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ferric chloride production subcategory. 415.380 Section 415.380 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ferric Chloride Production Subcategory § 415.380 Applicability; description of the ferric... ferric chloride from pickle liquor....

  17. 40 CFR 415.380 - Applicability; description of the ferric chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ferric chloride production subcategory. 415.380 Section 415.380 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ferric Chloride Production Subcategory § 415.380 Applicability; description of the ferric... ferric chloride from pickle liquor....

  18. 40 CFR 415.380 - Applicability; description of the ferric chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ferric chloride production subcategory. 415.380 Section 415.380 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ferric Chloride Production Subcategory § 415.380 Applicability; description of the ferric... ferric chloride from pickle liquor....

  19. 40 CFR 415.380 - Applicability; description of the ferric chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ferric chloride production subcategory. 415.380 Section 415.380 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ferric Chloride Production Subcategory § 415.380 Applicability; description of the ferric... ferric chloride from pickle liquor....

  20. 40 CFR 415.380 - Applicability; description of the ferric chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ferric chloride production subcategory. 415.380 Section 415.380 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ferric Chloride Production Subcategory § 415.380 Applicability; description of the ferric... ferric chloride from pickle liquor....

  1. The effect of chloride ion on the ferric chloride leaching of galena concentrate

    NASA Astrophysics Data System (ADS)

    Warren, G. W.; Kim, Seon-Hyo; Henein, H.

    1987-03-01

    Previous investigations of the ferric chloride brine leaching of galena concentrate have shown that additions of chloride ion result in accelerated dissolution rates. The current study has provided the necessary information to extend and modify these previous results by incorporating the important effect of chloride ion on the dissolution kinetics. As part of this study the solubility of lead chloride in ferric chloride-brine solutions has been determined and results indicate that additions of either FeCl3 or NaCl increase the PbCl2 solubility. This is attributed to the effect of complexing on the level of free chloride ion. In addition, the dissolution kinetics of elemental lead and lead chloride were also determined and compared with the kinetics of PbS dissolution. It is significant that the rate of dissolution of PbCl2 decreases as the concentration of Cl- is decreased and as the concentration of dissolved lead increases. These results along with SEM examination of partially reacted Pb shot show that solid PbCl2 forms on the surface long before the bulk solution is saturated with lead. The PbCl2 is proposed to form by a direct electrochemical reaction between Cl- and PbS prior to the formation of dissolved lead. The reaction was determined to be first order with respect to Cl- and closely obeys the following kinetic model based on a rate limiting charge transfer reaction at the surface:1 - (1 - a)^{1/3} left[ {{5.01x10^{11} }/{r_0 }left[ {Fe^{3 + } } right]_T^{0.21} left[ {Cl^ - } right]_T^{1.0} exp left( {{ - 72100}/{RT}} right)} right]t The model is in excellent agreement with experimental results up to about 95 pct reaction as long as the solubility of PbCl2 is greater than about 0.051 M. Where these conditions are not met, deviation from the surface reaction model occurs due to the extremely slow dissolution rate of PbCl2. Therefore the effect of Cl- on the brine leaching of PbS is attributed to two factors, the direct reaction of Cl- with the pbS surface

  2. Acetogenic microbial degradation of vinyl chloride

    USGS Publications Warehouse

    Bradley, P.M.; Chapelle, F.H.

    2000-01-01

    Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C- acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries, respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and humic acids- reducing conditions.Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C-acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and

  3. Arylalkylation of 4-tert-butyltoluene with substituted benzyl chlorides

    SciTech Connect

    Pozdnyakovich Y.V.; Savyak, R.P.; Shein, S.M.

    1986-08-01

    The reaction of 4-alkylbenzyl chlorides with 4-tert-butyltoluene in the presence of titanium tetrachloride and ferric chloride leads to the formation of 2-methyl-4'-alkyl-5-tert-butyldiphenylmethanes. The arylalkylation of 4-tert-butyltoluene with 2- and 4-chlorobenzyl chlorides, catalyzed by titanium tetrachloride, leads to the formation of mixtures of 2-methyl-5-tert-butyldiphenylmethane, 2-tert-butyl-5-methyldiphenylmethane, and isomeric methyldiphenylmethanes containing a chloride atom in the benzyl fragment. The products of the reaction catalyzed by ferric chloride do not contain 2-tert-butyl-5-methylchlorodiphenylmethanes. The reaction of 4-nitrobenzyl chloride with 4-tert-butyltoluence in the presence of ferric chloride leads to the formation of a mixture of 2-methyl-4'-nitro-5-tert-butyldiphenylmethane and isomeric methylnitrodiphenylmethanes. Under the influence of AlCl/sub 3/-CH/sub 3/NO/sub 2/ in benzene 2,4'-dimethyl-5-tert-butyldiphenylmethane eliminates both the 4-methylbenzyl group and the tert-butyl group. Under analogous conditions 2-methyl-5-tert-butyldiphenylmethanes containing a chlorine atom or a nitro group in the benzyl fragment are dealkylated with the elimination of only the tert-butyl group.

  4. Chlormequat chloride retards rat embryo growth in vitro.

    PubMed

    Xiagedeer, Bayindala; Wu, Shuang; Liu, Yingjuan; Hao, Weidong

    2016-08-01

    Chlormequat chloride is the most widely used plant growth regulator in agriculture to promote sturdier growth of grain crops by avoidance of lodging. Therefore, human exposure to chlormequat chloride is very common, but its developmental toxicity has not been studied. Thus, we investigated the developmental toxicity of chlormequat chloride by applying rat whole embryo culture (WEC) model, limb bud micromass culture and 3T3 fibroblast cytotoxicity test. Chlormequat chloride at 150μg/ml (0.93mM) retarded the rat embryo growth without causing significant morphological malformations and at 500μg/ml (3.1mM) caused both retardation and morphological malformation of the embryos. However, the proliferation and differentiation of limb bud cells were not affected by chlormequat chloride at as high as up to 1000μg/ml (6.2mM) applied. This concentration of chlormequat chloride did not affect the cell viability as examined by 3T3 fibroblast cytotoxicity test either, suggesting that cellular toxicity may not play a role in chlormequat induced inhibition of rat embryo growth. Collectively, our results demonstrated that chlormequat chloride may affect embryo growth and development without inhibiting cell viability. PMID:27165806

  5. An Apical-Membrane Chloride Channel in Human Tracheal Epithelium

    NASA Astrophysics Data System (ADS)

    Welsh, Michael J.

    1986-06-01

    The mechanism of chloride transport by airway epithelia has been of substantial interest because airway and sweat gland-duct epithelia are chloride-impermeable in cystic fibrosis. The decreased chloride permeability prevents normal secretion by the airway epithelium, thereby interfering with mucociliary clearance and contributing to the morbidity and mortality of the disease. Because chloride secretion depends on and is regulated by chloride conductance in the apical cell membrane, the patch-clamp technique was used to directly examine single-channel currents in primary cultures of human tracheal epithelium. The cells contained an anion-selective channel that was not strongly voltage-gated or regulated by calcium in cell-free patches. The channel was also blocked by analogs of carboxylic acid that decrease apical chloride conductance in intact epithelia. When attached to the cell, the channel was activated by isoproterenol, although the channel was also observed to open spontaneously. However, in some cases, the channel was only observed after the patch was excised from the cell. These results suggest that this channel is responsible for the apical chloride conductance in airway epithelia.

  6. Strong emission of methyl chloride from tropical plants.

    PubMed

    Yokouchi, Yoko; Ikeda, Masumi; Inuzuka, Yoko; Yukawa, Tomohisa

    2002-03-14

    Methyl chloride is the largest natural source of ozone-depleting chlorine compounds, and accounts for about 15 per cent of the present atmospheric chlorine content. This contribution was likely to have been relatively greater in pre-industrial times, when additional anthropogenic sources-such as chlorofluorocarbons-were absent. Although it has been shown that there are large emissions of methyl chloride from coastal lands in the tropics, there remains a substantial shortfall in the overall methyl chloride budget. Here we present observations of large emissions of methyl chloride from some common tropical plants (certain types of ferns and Dipterocarpaceae), ranging from 0.1 to 3.7 microg per gram of dry leaf per hour. On the basis of these preliminary measurements, the methyl chloride flux from Dipterocarpaceae in southeast Asia alone is estimated at 0.91 Tg yr-1, which could explain a large portion of missing methyl chloride sources. With continuing tropical deforestation, natural sources of chlorine compounds may accordingly decrease in the future. Conversely, the abundance of massive ferns in the Carboniferous period may have created an atmosphere rich in methyl chloride. PMID:11894090

  7. Fate and effects of methylene chloride in activated sludge.

    PubMed

    Klecka, G M

    1982-09-01

    Activated sludge obtained from a municipal wastewater treatment plant was acclimated to methylene chloride at concentrations between 1 and 100 mg/liter by continuous exposure to the compound for 9 to 11 days. Acclimated cultures were shown to mineralize methylene chloride to carbon dioxide and chloride. Rates of methylene chloride degradation were 0.14, 2.3, and 7.4 mg of CH2Cl2 consumed per h per g of mixed-liquor suspended solids for cultures incubated in the presence of 1, 10, and 100 mg/liter, respectively. Concentrations of methylene chloride between 10 and 1,000 mg/liter had no significant effect on O2 consumption or glucose metabolism by activated sludge. A hypothetical model was developed to examine the significance of volatilization and biodegradation for the removal of methylene chloride from an activated sludge reactor. Application of the model indicated that the rate of biodegradation was approximately 12 times greater than the rate of volatilization. Thus, biodegradation may be the predominant process determining the fate of methylene chloride in activated sludge systems continuously exposed to the compound. PMID:7138008

  8. Fate and effects of methylene chloride in activated sludge.

    PubMed Central

    Klecka, G M

    1982-01-01

    Activated sludge obtained from a municipal wastewater treatment plant was acclimated to methylene chloride at concentrations between 1 and 100 mg/liter by continuous exposure to the compound for 9 to 11 days. Acclimated cultures were shown to mineralize methylene chloride to carbon dioxide and chloride. Rates of methylene chloride degradation were 0.14, 2.3, and 7.4 mg of CH2Cl2 consumed per h per g of mixed-liquor suspended solids for cultures incubated in the presence of 1, 10, and 100 mg/liter, respectively. Concentrations of methylene chloride between 10 and 1,000 mg/liter had no significant effect on O2 consumption or glucose metabolism by activated sludge. A hypothetical model was developed to examine the significance of volatilization and biodegradation for the removal of methylene chloride from an activated sludge reactor. Application of the model indicated that the rate of biodegradation was approximately 12 times greater than the rate of volatilization. Thus, biodegradation may be the predominant process determining the fate of methylene chloride in activated sludge systems continuously exposed to the compound. PMID:7138008

  9. Sodium/metal chloride batteries: Summary of status

    SciTech Connect

    Sen, R.K.

    1988-09-01

    In 1972, there was an effort underway at ESB to try to develop a sodium/antimony trichloride battery that would operate at 200/degree/C or less. These cells, like their sodium/sulfur counterpart, used beta alumina electrolyte tubes, but with a second component in the electrolyte, namely molten sodium tetrachloroaluminate. The latter was used on the acid side, i.e., with an excess of aluminum chloride. Starting a little later, about 1975 it is rumored, workers at the Anglo American Company in South Africa began experimenting with positive electrodes consisting of iron or nickel chloride, using an electrolyte system that was similar to that of ESB except that the sodium tetrachloroaluminate was used on the basic side, i.e., with an excess of sodium chloride. The Anglo American work was focused on the high-temperature chlorination of the metal carbides as the means to form the porous iron or nickel chloride positive electrodes. Ultimately, the work at ESB was abandoned, while that at Anglo American blossomed, eventually leading to the formation of Zebra Power Systems S.A. in South Africa. The latter has been involved, since about 1980, in a number of collaborative programs with UKAEA Harwell and Beta RandD Ltd. in the UK to develop the sodium/metal chloride battery technology. The embodiment with iron chloride has become known as the Zebra battery, while the nickel chloride variant is known as the Cheetah battery. 17 refs., 4 figs., 2 tabs.

  10. Anomalous chloride flux discharges from Yellowstone National Park

    USGS Publications Warehouse

    Friedman, I.; Norton, D.R.

    1990-01-01

    The chloride concentration of some thermal springs in and adjacent to Yellowstone National Park is constant through time although their discharge varies seasonally. As a result the chloride flux from these springs increases during periods of increased discharge. We believe that this is caused by changes in the height of the local groundwater table, which affects the discharge of the springs but not their chloride concentration. The discharge from Mammoth Hot Springs varies seasonally, but its chloride concentration remains constant. We take this as evidence that this major thermal feature is derived from orifices that are tapping the local water table close to its surface. Three of the four major rivers (Yellowstone, Snake and Falls) exiting the Park also show an increased chloride flux during the spring runoff that cannot be explained solely by the contribution of snowmelt, nor by release of hot-spring-derived chloride stored in the soil during the winter and released in the spring. The increased chloride flux in these rivers is attributed to their draining shallow hot springs similar to those mentioned above. In contrast to the Yellowstone, Snake and Falls Rivers, the Firehole and Gibbon Rivers, which unite to form the Madison River and which collectively drain several major geyser basins, display a poor correlation between chloride flux and discharge. The cause, we believe, is that a large part of the thermal water input to these two rivers originated at great depths where the seasonal variation in the height of the water table had a negligible effect on hot spring discharge. Monitoring of seasonal discharge and chloride concentration of thermal features yields information on the depths at which these thermal features tap the local water table. ?? 1990.

  11. Anomalous chloride flux discharges from Yellowstone National Park

    NASA Astrophysics Data System (ADS)

    Friedman, Irving; Norton, Daniel R.

    1990-08-01

    The chloride concentration of some thermal springs in and adjacent to Yellowstone National Park is constant through time although their discharge varies seasonally. As a result the chloride flux from these springs increases during periods of increased discharge. We believe that this is caused by changes in the height of the local groundwater table, which affects the discharge of the springs but not their chloride concentration. The discharge from Mammoth Hot Springs varies seasonally, but its chloride concentration remains constant. We take this as evidence that this major thermal feature is derived from orifices that are tapping the local water table close to its surface. Three of the four major rivers (Yellowstone, Snake and Falls) exiting the Park also show an increased chloride flux during the spring runoff that cannot be explained solely by the contribution of snowmelt, nor by release of hot-spring-derived chloride stored in the soil during the winter and released in the spring. The increased chloride flux in these rivers is attributed to their draining shallow hot springs similar to those mentioned above. In contrast to the Yellowstone, Snake and Falls Rivers, the Firehole and Gibbon Rivers, which unite to form the Madison River and which collectively drain several major geyser basins, display a poor correlation between chloride flux and discharge. The cause, we believe, is that a large part of the thermal water input to these two rivers originated at great depths where the seasonal variation in the height of the water table had a negligible effect on hot spring discharge. Monitoring of seasonal discharge and chloride concentration of thermal features yields information on the depths at which these thermal features tap the local water table.

  12. Hydrothermal carbonization of poly(vinyl chloride).

    PubMed

    Poerschmann, J; Weiner, B; Woszidlo, S; Koehler, R; Kopinke, F-D

    2015-01-01

    Poly(vinyl chloride) (PVC) was subjected to hydrothermal carbonization in subcritical water at 180-260 °C. Dehydrochlorination increased with increasing reaction temperature. The release of chlorine was almost quantitative above ∼235 °C. The fraction of organic carbon (OC) recovered in the hydrochar decreased with increasing operating temperature from 93% at 180 °C to 75% at 250 °C. A wide array of polycyclic aromatic hydrocarbons (PAHs) could be detected in the aqueous phase, but their combined concentration amounted to only ∼140 μg g(-1) PVC-substrate at 240 °C. A pathway for the formation of cyclic hydrocarbons and O-functionalized organics was proposed. Chlorinated hydrocarbons including chlorophenols could only be identified at trace levels (low ppb). Polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs) could not be detected. The sorption potential of the hydrochar turned out to be very low, in particular for polar organic pollutants. Our results provide strong evidence that hydrothermal carbonization of household organic wastes which can be tied to co-discarded PVC-plastic residues is environmentally sound regarding the formation of toxic organic products. Following these findings, hydrothermal treatment of PVC-waste beyond operating temperatures of ∼235 °C to allow complete release of organic chlorine should be further pursued. PMID:25150971

  13. Regulation of neuronal chloride homeostasis by neuromodulators.

    PubMed

    Mahadevan, Vivek; Woodin, Melanie A

    2016-05-15

    KCC2 is the central regulator of neuronal Cl(-) homeostasis, and is critical for enabling strong hyperpolarizing synaptic inhibition in the mature brain. KCC2 hypofunction results in decreased inhibition and increased network hyperexcitability that underlies numerous disease states including epilepsy, neuropathic pain and neuropsychiatric disorders. The current holy grail of KCC2 biology is to identify how we can rescue KCC2 hypofunction in order to restore physiological levels of synaptic inhibition and neuronal network activity. It is becoming increasingly clear that diverse cellular signals regulate KCC2 surface expression and function including neurotransmitters and neuromodulators. In the present review we explore the existing evidence that G-protein-coupled receptor (GPCR) signalling can regulate KCC2 activity in numerous regions of the nervous system including the hypothalamus, hippocampus and spinal cord. We present key evidence from the literature suggesting that GPCR signalling is a conserved mechanism for regulating chloride homeostasis. This evidence includes: (1) the activation of group 1 metabotropic glutamate receptors and metabotropic Zn(2+) receptors strengthens GABAergic inhibition in CA3 pyramidal neurons through a regulation of KCC2; (2) activation of the 5-hydroxytryptamine type 2A serotonin receptors upregulates KCC2 cell surface expression and function, restores endogenous inhibition in motoneurons, and reduces spasticity in rats; and (3) activation of A3A-type adenosine receptors rescues KCC2 dysfunction and reverses allodynia in a model of neuropathic pain. We propose that GPCR-signals are novel endogenous Cl(-) extrusion enhancers that may regulate KCC2 function. PMID:26876607

  14. Chloride Regulation in the Pain Pathway

    PubMed Central

    Price, Theodore J; Cervero, Fernando; Gold, Michael S; Hammond, Donna L; Prescott, Steven A

    2009-01-01

    Melzack and Wall’s Gate Control Theory of Pain laid the theoretical groundwork for a role of spinal inhibition in endogenous pain control. While the Gate Control Theory was based on the notion that spinal inhibition is dynamically regulated, mechanisms underlying the regulation of inhibition have turned out to be far more complex than Melzack and Wall could have ever imagined. Recent evidence indicates that an exquisitely sensitive form of regulation involves changes in anion equilibrium potential (Eanion), which subsequently impacts fast synaptic inhibition mediated GABAA, and to a lesser extent, glycine receptor activation, the prototypic ligand gated anion channels. The cation-chloride co-transporters (in particular NKCC1 and KCC2) have emerged as proteins that play a critical role in the dynamic regulation of Eanion which in turn appears to play a critical role in hyperalgesia and allodynia following peripheral inflammation or nerve injury. This review summarizes the current state of knowledge in this area with particular attention to how such findings relate to endogenous mechanisms of hyperalgesia and allodynia and potential applications for therapeutics based on modulation of intracellular Cl− gradients or pharmacological interventions targeting GABAA receptors PMID:19167425

  15. Processing of mercurous chloride in reduced gravity

    SciTech Connect

    Watson, C.; Thomas, A.

    1996-12-31

    In a joint experiment between the Northrop-Grumman Science and Technology Center and the University of Alabama in Huntsville, Consortium for Materials Development in Space (UAH/CMDS), single crystals of mercurous chloride (Hg{sub 2}Cl{sub 2}) were grown in the Space Experiment Facility (SEF) transparent furnace that was flown on Spacelab 4 (STS-77) in May 1996. Single crystals of this material can be readily grown in normal gravity by closed-tube physical vapor transport, but the crystals generally contain structural inhomogeneities which degrade the optical performance. The nature and cause of these defects are not completely understood, but their degree appears to correlate with the Rayleigh number that characterizes the convective transport during their growth; hence, it is suspected that uncontrolled convection may play a role in the defect structure. The objective of the flight experiment was to reduce the convective flows by several orders of magnitude to see if the structural inhomogeneities can be reduced or eliminated. This paper will describe the physical and thermal properties of the SEF furnace, the ampoule design and loading procedure, and the ground testing, and will also present the preliminary flight results.

  16. Piezoresistive Properties of Polyvinyl Chloride Composites

    NASA Astrophysics Data System (ADS)

    Toprakci, Hatice Aylin Karahan

    Textile based sensors provide an interface between the user and the electronic system by converting any type of physiological or environmental signal into electrical signals. Common applications include health monitoring, rehabilitation, multimedia, and surveillance. In this research we demonstrate fabrication of piezoresistive sensors on textile fabrics through application of a screen-printed conductive nanocomposite layer of plasticized poly(vinyl chloride) (PVC), and carbon nanofiber (CNF). In order to understand the behavior of conductive plastisol, morphological, mechanical and electrical properties of composite films were investigated for different molecular weights of PVC. Homogeneous filler dispersion and good filler/polymer interphase were observed without any dominant filler orientation. Mechanical and electrical properties were found to be affected by CNF, plasticizer content and matrix molecular weight. CNFs were found to provide substantial bridging in the matrix and enhance strength. These nanostructured composite sensors were found to be sensitive under different levels of strain which can be monitored by change in electrical resistance. Finally, we demonstrate the fabrication of piezoresistive sensors on textile fabrics through application of a screen-printed conductive nanocomposite layer of conductive plastisol. Conductive plastisol was found to show good adhesion to fabric with homogeneous CNF distribution. As in composite films, samples were found to show negative piezoresistance at different levels of strain. Strain level and filler concentration were found to affect the piezoresistive behavior and sensitivity of the printed sensors.

  17. Antibiotic bonding to polytetrafluoroethylene with tridodecylmethylammonium chloride

    SciTech Connect

    Harvey, R.A.; Alcid, D.V.; Greco, R.S.

    1982-09-01

    Polytetrafluoroethylene (PTFE) treated with the cationic surfactant, triodecylmethylammonium chloride (TDMAC), binds /sup 14/C-penicillin (1.5 to 2 mg antibiotic/cm graft), whereas untreated PTFE or PTFE treated with anionic detergents shows little binding of antibiotic. TDMAC-treated PTFE concomitantly binds penicillin and heparin, generating a surface that potentially can resist both infection and thrombosis. The retention of these biologically active molecules is not due to passive entrapment in the PTFE but reflects an ionic interaction between the anionic ligands and surface-bound TDMAC. Penicillin bound to PTFE is not removed by exhaustive washing in aqueous buffers but is slowly released in the presence of plasma or when the PTFE is placed in a muscle pouch in the rat. Muscle tissue adjacent to the treated PTFE shows elevated levels of antibiotic following implantation. PTFE treated with TDMAC and placed in a muscle pouch binds /sup 14/C-penicillin when it is locally irrigated with antibiotic or when penicillin is administered intravenously. Thus, the TDMAC surface treated either in vitro or in vivo with penicillin provides an effective in situ source for the timed release of antibiotic.

  18. NQR in tert-butyl chloride

    NASA Astrophysics Data System (ADS)

    Brunetti, Aldo H.

    2004-03-01

    Tert-butyl chloride has been broadly studied experimentally through various techniques such as X-ray crystallography, DTA, and NMR. It was also studied experimentally through nuclear quadrupole resonance (NQR), but this study was limited and incomplete. In this paper, we present a more detailed study of TBC through the NQR of 35Cl. Our results show that near 120 K, the onset of the CH 3 groups semirotations around symmetry axis C3 takes place with an activation energy U=16.1 kJ mol -1. This intramolecular movement produces a T1 minimum near 148 K and is the dominant mechanism of the nuclear spin-lattice relaxation in phase III of this compound. In phase II of TBC, we show that there are not only methyl groups semirotations, but also semirotations of the whole molecule around a different axis from the symmetry axis C' 3 (C-Cl bond) with an activation energy of E=10.4 kJ mol -1.

  19. NEXAFS and XPS studies of nitrosyl chloride.

    PubMed

    Schio, Luca; Li, Cui; Monti, Susanna; Salén, Peter; Yatsyna, Vasyl; Feifel, Raimund; Alagia, Michele; Richter, Robert; Falcinelli, Stefano; Stranges, Stefano; Zhaunerchyk, Vitali; Carravetta, Vincenzo

    2015-04-14

    The electronic structure of nitrosyl chloride (ClNO) has been investigated in the gas phase by X-ray Photoelectron (XPS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopy at the Cl 2p, Cl 2s, N 1s and O 1s edges in a combined experimental and theoretical study. The theoretical calculations at different levels of approximation predict ionization potential values in good agreement with the experimental data and allow us to assign the main features of the absorption spectra. An unexpected failure of the density functional model is, however, observed in the calculation of the Cl 2s binding energy, which is related to a large self-interaction error. Largely different photoabsorption cross-section patterns are experimentally observed in core excitations from the investigated quantum shells (n = 1, 2). This finding is confirmed by the oscillator strength distributions calculated at different absorption edges; in the case of the n = 2 shell the bands below the threshold are extremely weak and most of the absorption intensity is due to excitations in the continuum. PMID:25754872

  20. Industrial preparation of poly(vinyl chloride).

    PubMed Central

    Cohan, G F

    1975-01-01

    Vinyl chloride (VCM) is unloaded from railroad tank cars or tank trucks into pressurized storage spheres. VCM, emulsifiers, and catalysts are metered into polymerization vessels wherein PVC is produced through a chemical reaction in an aqueous medium under controlled conditions of temperature and pressure. After the reaction reaches a predetermined completion, the contents are transferred to a secondary vessel wherein steam is injected and the VCM containing vapors are pumped to a recovery system. The VCM-containing vapors are compressed, cooled, condensed, decanted, and recycled to the process for reuse. The stripped PVC resin water slurry is then pumped to blending tanks where the batches from multiple reaction vessels are blended for product uniformity. From the plant tanks the PVC resin water slurry is pumped to a dewatering centrifuge, where approximately 90% of the water is removed and subsequently discharged to the industrial sewer system. The PVC resin wet cake is conveyed from the centrifuge to a flash dryer where essentially all the remaining water is removed. At this point, the dry resin is buoyant in an air stream and enters a two-stage collection system for separation of conveying air. The PVC resin is then screened and air-conveyed to storage for bulk shipment, compounding, or bagging. PMID:1175567

  1. Chloride Channelopathies of ClC-2

    PubMed Central

    Bi, Miao Miao; Hong, Sen; Zhou, Hong Yan; Wang, Hong Wei; Wang, Li Na; Zheng, Ya Juan

    2014-01-01

    Chloride channels (ClCs) have gained worldwide interest because of their molecular diversity, widespread distribution in mammalian tissues and organs, and their link to various human diseases. Nine different ClCs have been molecularly identified and functionally characterized in mammals. ClC-2 is one of nine mammalian members of the ClC family. It possesses unique biophysical characteristics, pharmacological properties, and molecular features that distinguish it from other ClC family members. ClC-2 has wide organ/tissue distribution and is ubiquitously expressed. Published studies consistently point to a high degree of conservation of ClC-2 function and regulation across various species from nematodes to humans over vast evolutionary time spans. ClC-2 has been intensively and extensively studied over the past two decades, leading to the accumulation of a plethora of information to advance our understanding of its pathophysiological functions; however, many controversies still exist. It is necessary to analyze the research findings, and integrate different views to have a better understanding of ClC-2. This review focuses on ClC-2 only, providing an analytical overview of the available literature. Nearly every aspect of ClC-2 is discussed in the review: molecular features, biophysical characteristics, pharmacological properties, cellular function, regulation of expression and function, and channelopathies. PMID:24378849

  2. Kinetics of radiational hydrosilylation of vinyl chloride by methyldichlorosilane

    SciTech Connect

    Bryantseva, N.V.; Lugovoi, Yu.M.; Garsiya, I.K.; Shostenko, A.G.

    1988-03-01

    The main product of the radiational interaction of methyldichlorosilane with vinyl chloride is 2-chloroethylmethyldichlorosilane, formed according to a radical-chain addition scheme. The energy of activation of the addition reaction of the methyldichlorosilyl radical to vinyl chloride is 14 +/- 4 kJ/mole. Its low value is explained by the p..pi..-d..pi.. interaction in the transition state of the reaction. This interaction also explains the similar values of the energies of activation of the radical addition reactions of methyldichlorosilane to 1-hexene and vinyl chloride.

  3. Chloride cells and the hormonal control of teleost fish osmoregulation.

    PubMed

    Foskett, J K; Bern, H A; Machen, T E; Conner, M

    1983-09-01

    Teleost fish osmoregulation is largely the result of integrated transport activities of the gill, gut and renal system. The basic 'epithelial fabric' in each of these tissues is adapted to provide the appropriate transport mechanisms depending upon whether the fish is in fresh water or sea water. Net NaCl transport by the branchial epithelium reverses direction when euryhaline species migrate between the two media, providing a useful focus in experiments designed to elucidate mechanisms of differentiation and integration of transport function. Isolated opercular membranes and skins from certain seawater-adapted species are good models to study branchial salt extrusion mechanisms. These heterogeneous tissues generate short-circuit currents equal to net chloride secretion. The vibrating probe technique has allowed localization of all current and almost all conductance to the apical crypt of chloride cells. Area-specific surface current and conductance of chloride cells are 18 mA cm-2 and 580 mS cm-2 (1.7 omega cm2), ranking them as one of the most actively transporting and conductive cells known. There is no net sodium transport under short-circuit conditions but the chloride secretion process is sodium-dependent and ouabain and 'loop'-diuretic sensitive. Sodium fluxes through chloride cells are large (PNa = 5.2 X 10(-4) cms-1) nd appear passive and rate-limited by a single barrier. A link may exist between the active transport and leak pathways since sodium fluxes always account for 50% of chloride cell conductance. The sodium pathway is probably the chloride cell-accessory cell tight junction, although this is still unresolved. Chloride secretion can be rapidly modulated by several hormones, including catecholamines, somatostatin, glucagon, vasoactive intestinal polypeptide and urotensins I and II. Regulation by these hormones may be by rapid alterations of cellular cAMP levels. Differentiation of chloride cells and chloride secretion may be controlled by cortisol

  4. Chloride metallurgy: PGM recovery and titanium dioxide production

    NASA Astrophysics Data System (ADS)

    Puvvada, G. V. K.; Sridhar, R.; Lakshmanan, V. I.

    2003-08-01

    This paper examines in detail the thermodynamics and application of chloride metallurgy for the extraction of precious metals, such as gold and silver, and platinum-group metals. The advantages with regard to the solubilities of metal ion species and their reduction potentials in chloride media are discussed with examples. The use of chloride media for the extraction of platinum-group metals from spent autocatalysts and for the production of high-purity pigment-grade TiO2 and titanium metal from ilmenite feed stocks is discussed in the case studies provided.

  5. Method for the production of uranium chloride salt

    DOEpatents

    Westphal, Brian R.; Mariani, Robert D.

    2013-07-02

    A method for the production of UCl.sub.3 salt without the use of hazardous chemicals or multiple apparatuses for synthesis and purification is provided. Uranium metal is combined in a reaction vessel with a metal chloride and a eutectic salt- and heated to a first temperature under vacuum conditions to promote reaction of the uranium metal with the metal chloride for the production of a UCl.sub.3 salt. After the reaction has run substantially to completion, the furnace is heated to a second temperature under vacuum conditions. The second temperature is sufficiently high to selectively vaporize the chloride salts and distill them into a condenser region.

  6. Copper Chloride Cathode For Liquid-Sodium Cell

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Nagasubramanian, Ganesan; Bankston, Clyde P.

    1990-01-01

    Rechargeable liquid-sodium cell with copper chloride cathode offers substantial increase in energy density over cells made with other cathode materials. Unit has theoretical maximum energy density of 1135 W.h/kg. Generates electricity by electrochemical reaction of molten sodium and solid copper chloride immersed in molten electrolyte, sodium tetrachloroaluminate at temperature of equal to or greater than 200 degrees C. Wall of alumina tube separates molten electrolyte from molten sodium anode. Copper chloride cathode embedded in pores of sintered nickel cylinder or directly sintered.

  7. Anion effects in the extraction of lanthanide 2-thenoyltrifluoroacetone complexes into an ionic liquid

    SciTech Connect

    Jensen, Mark P.; Beitz, James V.; Rickert, Paul G.; Borkowski, Marian; Laszak, Ivan; Dietz, Mark L.

    2012-07-01

    The extraction of trivalent lanthanides from an aqueous phase containing 1 M NaClO{sub 4} into the room temperature ionic liquid 1-butyl-3-methylimidazolium nonafluoro-1-butane sulfonate by the beta-diketone extractant 2-thenoyltrifluoroacetone (Htta) was studied. Radiotracer distribution, absorption spectroscopy, time-resolved laser-induced fluorescence spectroscopy, and X-ray absorption fine structure measurements point to the extraction of multiple lanthanide species. At low extractant concentrations, fully hydrated aqua cations of the lanthanides are present in the ionic liquid phase. As the extractant concentration is increased 1:2 and 1:3 lanthanide:tta species are observed. In contrast, 1:4 Ln:tta complexes were observed in the extraction of lanthanides by Htta into 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide. (authors)

  8. Ligand-assisted soft-chemical synthesis of self-assembled different shaped mesoporous Co3O4: efficient visible light photocatalysts.

    PubMed

    Roy, Mouni; Ghosh, Sourav; Naskar, Milan Kanti

    2015-04-21

    Mesoporous self-assembled cobalt oxide (Co3O4) of different shapes was synthesized by a facile soft-chemical process using cobalt nitrate, oxalic acid and phosphoric acid in the presence of cationic templates, cetyltrimethylammonium bromide, 1-butyl-3-methylimidazolium bromide, and pyridinium bromide at 75 °C/2 h followed by calcination at 300 °C. The effect of cationic templates of the samples on the physico-chemical properties, and the photocatalytic efficiency for the degradation of Chicago Sky Blue 6B was studied. Pyridinium bromide and 1-butyl-3-methylimidazolium bromide facilitated formation of particles with different shaped morphology compared to cetyltrimethylammonium bromide. The rod-like particles having higher surface area exhibited higher photocatalytic performance. PMID:25792483

  9. Fast Measurement of Methanol Concentration in Ionic Liquids by Potential Step Method

    PubMed Central

    Hainstock, Michael L.; Tang, Yijun

    2015-01-01

    The development of direct methanol fuel cells required the attention to the electrolyte. A good electrolyte should not only be ionic conductive but also be crossover resistant. Ionic liquids could be a promising electrolyte for fuel cells. Monitoring methanol was critical in several locations in a direct methanol fuel cell. Conductivity could be used to monitor the methanol content in ionic liquids. The conductivity of 1-butyl-3-methylimidazolium tetrafluoroborate had a linear relationship with the methanol concentration. However, the conductivity was significantly affected by the moisture or water content in the ionic liquid. On the contrary, potential step could be used in sensing methanol in ionic liquids. This method was not affected by the water content. The sampling current at a properly selected sampling time was proportional to the concentration of methanol in 1-butyl-3-methylimidazolium tetrafluoroborate. The linearity still stood even when there was 2.4 M water present in the ionic liquid. PMID:25802522

  10. Accurate measurements of thermodynamic properties of solutes in ionic liquids using inverse gas chromatography.

    PubMed

    Mutelet, Fabrice; Jaubert, Jean-Noël

    2006-01-13

    Activity coefficients at infinite dilution of 29 organic compounds in two room temperature ionic liquids were determined using inverse gas chromatography. The measurements were carried out at different temperatures between 323.15 and 343.15K. To establish the influence of concurrent retention mechanisms on the accuracy of activity coefficients at infinite dilution for 1-butyl-3-methylimidazolium octyl sulfate and 1-ethyl-3-methylimidazolium tosylate, phase loading studies of the net retention volume per gram of packing as a function of the percent phase loading were used. It is shown that most of the solutes are retained largely by partition with a small contribution from adsorption on 1-butyl-3-methylimidazolium octyl sulfate and that the n-alkanes are retained predominantly by interfacial adsorption on 1-ethyl-3-methylimidazolium tosylate. PMID:16310203

  11. A Synthetic Chloride Channel Restores Chloride Conductance in Human Cystic Fibrosis Epithelial Cells

    PubMed Central

    Wang, Fei; Yao, Xiaoqiang; Yang, Dan

    2012-01-01

    Mutations in the gene-encoding cystic fibrosis transmembrane conductance regulator (CFTR) cause defective transepithelial transport of chloride (Cl−) ions and fluid, thereby becoming responsible for the onset of cystic fibrosis (CF). One strategy to reduce the pathophysiology associated with CF is to increase Cl− transport through alternative pathways. In this paper, we demonstrate that a small synthetic molecule which forms Cl− channels to mediate Cl− transport across lipid bilayer membranes is capable of restoring Cl− permeability in human CF epithelial cells; as a result, it has the potential to become a lead compound for the treatment of human diseases associated with Cl− channel dysfunction. PMID:22514656

  12. Automatic electrochemical ambient air monitor for chloride and chlorine

    DOEpatents

    Mueller, Theodore R.

    1976-07-13

    An electrochemical monitoring system has been provided for determining chloride and chlorine in air at levels of from about 10-1000 parts per billion. The chloride is determined by oxidation to chlorine followed by reduction to chloride in a closed system. Chlorine is determined by direct reduction at a platinum electrode in 6 M H.sub.2 SO.sub.4 electrolyte. A fully automated system is utilized to (1) acquire and store a value corresponding to electrolyte-containing impurities, (2) subtract this value from that obtained in the presence of air, (3) generate coulometrically a standard sample of chlorine mixed with air sample, and determine it as chlorine and/or chloride, and (4) calculate, display, and store for permanent record the ratio of the signal obtained from the air sample and that obtained with the standard.

  13. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1... granulated tin suspended in water and hydrochloric acid or chlorine. (b) Both forms of the ingredient...

  14. Conversion of waste polyvinyl chloride (PVC) to useful chemicals

    SciTech Connect

    Kamo, T.; Yamamoto, Y.; Miki, K.; Sato, Y.

    1995-12-01

    Combustion and pyrolysis of plastics have been studyed for thermal energy recycling. In this study, hydrogen chloride was removed from PVC, then liquefied the chloried free PVC in hydrogen donor solvent.

  15. Purification and reconstitution of chloride channels from kidney and trachea

    SciTech Connect

    Landry, D.W.; Akabas, M.H.; Redhead, C.; Edelman, A.; Cragoe, E.J. Jr.; Al-Awqati, Q. )

    1989-06-23

    Chloride channels mediate absorption and secretion of fluid in epithelia, and the regulation of these channels is now known to be defective in cystic fibrosis. Indanyl-oxyacetic acid 94 (IAA-94) is a high-affinity ligand for the chloride channel, and an affinity resin based on that structure was developed. Solubilized proteins from kidney and trachea membranes were applied to the affinity matrix, and four proteins with apparent molecular masses of 97, 64, 40, and 27 kilodaltons were eluted from the column by excess IAA-94. A potential-dependent {sup 36}Cl- uptake was observed after reconstituting these proteins into liposomes. Three types of chloride channels with single-channel conductances of 26, 100, and 400 picosiemens were observed after fusion of these liposomes with planar lipid bilayers. Similar types of chloride channels have been observed in epithelia.

  16. Thermodynamic calculation of self-diffusion in sodium chloride

    NASA Astrophysics Data System (ADS)

    Zhang, Baohua; Li, Chengbo; Shan, Shuangming

    2016-05-01

    Using the available pressure-volume-temperature equation of state of sodium chloride, we show that the self-diffusion coefficients of sodium and chloride in sodium chloride as a function of temperature and pressure can be successfully reproduced in terms of bulk elastic and expansivity data. We use a thermodynamic model that interconnects point-defect parameters with bulk properties. Our calculated diffusion coefficients and point-defect parameters, including activation enthalpy, activation entropy, and activation volume, well agree with reported experimental results when uncertainties are considered. Furthermore, the ionic conductivity of sodium chloride inferred from our predicted diffusivities of sodium through the Nernst-Einstein equation is compared with previous experimental data.

  17. SUBSTITUTING CADMIUM CYANIDE ELECTROPLATING WITH ZINC CHLORIDE ELECTROPLATING

    EPA Science Inventory

    The environmental and economic implications of substituting zinc chloride electroplating for cadmium cyanide electroplating were evaluated. he process substitution was successful in achieving product quality to satisfy the customer requirements for corrosion resistance. orrosion ...

  18. Lithium orotate, carbonate and chloride: pharmacokinetics, polyuria in rats.

    PubMed Central

    Smith, D F

    1976-01-01

    1 The pharmacokinetics of the lithium ion administered as lithium orotate were studied in rats. Parallel studies were carried out with lithium carbonate and lithium chloride. 2 No differences in the uptake, distribution and excretion of the lithium ion were observed between lithium orotate, lithium carbonate and lithium chloride after single intraperitoneal, subcutaneous or intragastric injections (0.5-1.0 mEq lithium/kg) or after administration of the lithium salts for 20 days in the food. 3 The findings oppose the notion that the pharmacokinetics of the lithium ion given as lithium orotate differ from lithium chloride or lithium carbonate. 4 Polyuria and polydipsia developed more slowly in rats given lithium orotate than in those given lithium carbonate or lithium chloride, perhaps due to an effect of the orotate anion. PMID:1260219

  19. SUBSTITUTION OF CADMIUM CYANIDE ELECTROPLATING WITH ZINC CHLORIDE ELECTROPLATING

    EPA Science Inventory

    The study evaluated the zinc chloride electroplating process as a substitute for cadmium cyanide electroplating in the manufacture of industrial connectors and fittings at Aeroquip Corporation. The process substitution eliminates certain wastes, specifically cadmium and cyanide, ...

  20. Heterogeneous Reaction gaseous chlorine nitrate and solid sodium chloride

    NASA Technical Reports Server (NTRS)

    Timonen, Raimo S.; Chu, Liang T.; Leu, Ming-Taun

    1994-01-01

    The heterogeneous reaction of gaseous chlorine nitrate and solid sodium chloride was investigated over a temperature range of 220 - 300 K in a flow-tube reactor interfaced with a differentially pumped quadrupole mass spectrometer.