Science.gov

Sample records for 1-butyl-3-methylimidazolium chloride c4mimcl

  1. Characterization of cellulose II nanoparticles regenerated from ionic liquid, 1-butyl-3-methylimidazolium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC)and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in ...

  2. Acute toxicity, biochemical toxicity and genotoxicity caused by 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium tetrafluoroborate in zebrafish (Danio rerio) livers.

    PubMed

    Zhang, Cheng; Shao, Yuting; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Guo, Yingying

    2017-02-21

    The present study examined the potential toxicity of 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3- methylimidazolium tetrafluoroborate ([Bmim]BF4) in the liver cells of zebrafish (Danio rerio) with different doses (20-160mg/L) on 7 and 14days. The effects of [Bmim]Cl and [Bmim]BF4 on acute toxicity, reactive oxygen species (ROS), antioxidant enzymes, glutathione S-transferase (GST), malondialdehyde (MDA), and DNA damage degree in livers of zebrafish were determined. The 50% lethal concentration (LC50) values after a 96-h exposure to [Bmim]Cl and [Bmim]BF4 were 632.8±67.4 and 604.6±56.2mg/L, respectively, which indicated that the substances were practically harmless. The minor discrepancy may be caused by the different anions. The ROS levels were dose-dependent, which may cause the inhibition of antioxidant enzyme activity, lipid peroxidation, DNA damage and the stimulation of detoxifying enzyme activity. The present study can also provide scientific support for the future selection and evaluation of ionic liquids (ILs).

  3. Radiation effects on microcrystalline cellulose in 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    Hao, Yan; Peng, Jing; Ao, Yinyong; Li, Jiuqiang; Zhai, Maolin

    2012-11-06

    The radiation processing of cellulose in ionic liquids (ILs) demands a comprehensive knowledge of radiation effects on cellulose in ILs. Herein, gamma radiation-induced degradation kinetics of microcrystalline cellulose (MCC) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was studied by viscometry. The intrinsic viscosity of MCC in [Bmim]Cl decreased slightly with increasing dose; while chemical structure and crystalline state of cellulose has no obvious change up to 300 kGy. The radiation degradation rate constant (k) of MCC in [Bmim]Cl was 2.60×10(-7)/kGy, lower than that of solid cellulose, but higher than that in N-methylmorpholine-N-oxide (NMMO) solvent. Furthermore, k value decreased to 1.12×10(-7)/kGy in dimethyl sulfoxide (DMSO)/[Bmim]Cl system due to the free radicals scavenging of DMSO. The radicals generated during irradiation play main role in the radiation degradation of MCC in [Bmim]Cl. This work provides a new way to control the average molecular weight of cellulose by radiation-induced degradation of cellulose in ILs.

  4. Highly ordered cellulose II crystalline regenerated from cellulose hydrolyzed by 1-butyl-3-methylimidazolium chloride.

    PubMed

    Ahn, Yongjun; Song, Younghan; Kwak, Seung-Yeop; Kim, Hyungsup

    2016-02-10

    This research focused on the preparation of highly ordered cellulose II crystalline by cellulose hydrolysis in ionic liquid, and the influence of molecular mobility on recrystallization of cellulose. The molar mass of cellulose was controlled by hydrolysis using 1-butyl-3-methylimidazolium chloride (BmimCl). The molecular mobility of cellulose dissolved in BmimCl was characterized by rheological properties. After characterization of cellulose solution and regeneration, change of molar mass and conversion to crystalline were monitored using gel-permeation chromatography and powder X-ray diffraction, respectively. The molar mass of the cellulose in BmimCl was remarkably decreased with an increase in duration time, resulting in better mobility and a lower conformational constraint below critical molar mass. The decrease in molar mass surprisingly increased the crystallinity up to ∼ 85%, suggesting a recrystallization rate dependence of the mobility. The correlation between the mobility and recrystallization rate represented quit different behavior above and below a critical molar mass, which strongly demonstrated to the effect of mobility on the conversion of amorphous state to crystalline structure.

  5. Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

    SciTech Connect

    Baker, Gary A; Heller, William T

    2009-01-01

    As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

  6. The genotoxic and cytotoxic effects of 1-butyl-3-methylimidazolium chloride in soil on Vicia faba seedlings.

    PubMed

    Liu, Tong; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Xie, Hui

    2015-03-21

    Although considered as "green" solvents, the toxic effects of ionic liquids (ILs) on organisms have been widely investigated in recent years. However, studies on the toxic effects of ILs on plants all focus on toxicity in nutrient solution. In the present paper, the toxic effects of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) on Vicia faba seedlings in soil at 0, 500, 1500, and 2500 mg kg(-1) on day 10 were studied. The present results showed that the growth of V. faba seedlings may be seriously inhibited when the IL concentrations were higher than 500 mg kg(-1). The EC50 values for shoot length, root length, and dry weight were 3886, 2483, and 3359 mg kg(-1), respectively. In addition, [C4mim]Cl caused lipid peroxidation and DNA damage at 500 mg kg(-1) and oxidative stress at 1500 mg kg(-1), which indicated that [C4mim]Cl may have genotoxicity and cytotoxicity on V. faba seedlings. Moreover, oxidative damage may be the main toxic mechanism of ILs.

  7. Synthesis, characterization and application of 1-butyl-3 methylimidazolium chloride as green material for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Varma, Mahesh N; Shende, Diwakar Z; Yoo, Chang Kyoo; Wasewar, Kailas L

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, (1)H-NMR, and (13)C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency.

  8. Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel

    PubMed Central

    Dharaskar, Swapnil A.; Varma, Mahesh N.; Shende, Diwakar Z.; Yoo, Chang Kyoo; Wasewar, Kailas L.

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  9. Influence of the current density on the electrochemical treatment of concentrated 1-butyl-3-methylimidazolium chloride solutions on diamond electrodes.

    PubMed

    Marcionilio, Suzana M L de Oliveira; Alves, Gisele M; E Silva, Rachel B Góes; Marques, Pablo J Lima; Maia, Poliana D; Neto, Brenno A D; Linares, José J

    2016-10-01

    This paper focuses on the influence of the current density treatment of a concentrated 1-butyl-3-methylimidazolium chloride (BMImCl) solution on an electrochemical reactor with a boron-doped diamond (BDD) anode. The decrease in the total organic carbon (TOC) and the BMImCl concentration demonstrate the capability of BDD in oxidizing ionic liquids (ILs) and further mineralizing (to CO2 and NO3 (-)) more rapidly at higher current densities in spite of the reduced current efficiency of the process. Moreover, the presence of Cl(-) led to the formation of oxychlorinated anions (mostly ClO3 (-) and ClO4 (-)) and, in combination with the ammonia generated in the cathode from the nitrate reduction, chloramines, more intensely at higher current density. Finally, the analysis of the intermediates formed revealed no apparent influence of the current density on the BMImCl degradation mechanism. The current density presents therefore a complex influence on the IL treatment process that is discussed throughout this paper.

  10. Hydrolysis of insoluble cellulose to glucose catalyzed by cellulase-containing liposomes in an aqueous solution of 1-butyl-3-methylimidazolium chloride.

    PubMed

    Yoshimoto, Makoto; Tanimura, Kazuhiko; Tokunaga, Kazuki; Kamimura, Akio

    2013-01-01

    The liposome containing cellulase from Trichoderma viride was prepared under the condition that an appreciable amount of cellulase was incorporated in lipid membranes. The liposomal cellulase and free enzyme were examined in their hydrolytic activities to insoluble cellulose powder CC31 in the acetate buffer solution (pH 4.8) of 15 w/w% [Bmim][Cl] (1-butyl-3-methylimidazolium chloride). The mean diameter and size distribution of cellulase-containing liposome were practically unchanged under the above condition. The free cellulase was deactivated more rapidly than the liposomal cellulase in catalyzing the hydrolysis of 2.0 g/l CC31 at 45°C in the presence of [Bmim][Cl] for 48 h. The activities of liposomal and free cellulase to cellobiose as soluble substrate were less susceptible to [Bmim][Cl] than their cellulolytic activities to CC31, meaning that β-glucosidase is relatively stable among the three enzyme components of cellulase. The rate of glucose production could be appreciably improved by the pretreatment of CC31 with [Bmim][Cl] alone at 120°C for 30 min followed by the liposomal cellulase-catalyzed hydrolysis of the substrate at 45°C at the [Bmim][Cl] concentration of 15 w/w%.

  11. Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose.

    PubMed

    Qi, Xinhua; Li, Luyang; Tan, Tengfei; Chen, Wenting; Smith, Richard L

    2013-03-19

    Functional carbonaceous material (FCM) loaded with carboxylic groups was prepared by hydrothermal carbonization of cellulose in the presence of acrylic acid. The resulting FCM was used as adsorbent for recovery of a water-soluble ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). The FCM consisted of microspheres (100-150 nm) and had a low surface area (ca. 20 m(2)/g), but exhibited adsorption capacity comparable to that of commercial activated carbon which can be attributed to the presence of high content of polar oxygenated groups (-OH, -C═O, -COOH) as revealed by spectral analyses. Sorption of [BMIM][Cl] onto FCM adsorbent could be well-described by pseudo-second-order kinetics. Thermodynamic and adsorption isothermal analyses revealed that the adsorption process was spontaneous, exothermic, and could be described by the Freundlich adsorption model. The FCM adsorbent could be regenerated effectively and recycled for at least three times without loss of adsorption capacity. The results of this work provide a facile method for production of functional carbonaceous materials from renewable resources that can be used for treatment of aqueous streams containing small concentrations of ionic liquid, [BMIM][Cl].

  12. Characterization of the influence of the ionic liquid 1-butyl-3-methylimidazolium chloride on the structure and thermal stability of green fluorescent protein.

    PubMed

    Heller, William T; O'Neill, Hugh M; Zhang, Qiu; Baker, Gary A

    2010-11-04

    Ionic liquids (ILs) are finding a vast array of applications as novel solvents for a wide variety of processes that include enzymatic chemistry, particularly as more biocompatible ILs are designed and discovered. While it is assumed that a native or near-native structure is required for enzymatic activity, there is some evidence that ILs alter protein structure and oligomerization states in a manner than can negatively impact function. The IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, is a well-studied, water-miscible member of the popular 1-alkyl-3-methylimidazolium IL family. To improve our understanding of the impact of water-miscible ILs on proteins, we have characterized the structure and oligomerization state of green fluorescent protein (GFP) in aqueous solutions containing 25 and 50 vol % [bmim]Cl using a combination of optical spectroscopy and small-angle neutron scattering (SANS). Measurements were also performed as a function of temperature to provide insight into the effect of the IL on the thermal stability of GFP. While GFP exists as a dimer in water, the presence of 25 vol % [bmim]Cl causes GFP to transition to a monomeric state. The SANS data indicate that GFP is a great deal less compact in 50 vol % [bmim]Cl than in neat water, indicative of unfolding from the native structure. The oligomerization state of the protein in IL-containing aqueous solution changes from a dimer to a monomer in response to the IL, but does not change as a function of temperature in the IL-containing solution. The SANS and spectroscopic results also demonstrate that the addition of [bmim]Cl to the solution decreases the thermal stability of GFP, allowing the protein to unfold at lower temperatures than in aqueous solution.

  13. (BMI)3LnCl6 crystals as models for the coordination environment of LnCl3 (Ln = Sm, Eu, Dy, Er, Yb) in 1-butyl-3-methylimidazolium chloride ionic-liquid solution.

    PubMed

    Han, Yulun; Lin, Cuikun; Meng, Qingguo; Dai, Fengrong; Sykes, Andrew G; Berry, Mary T; May, P Stanley

    2014-06-02

    A series of (BMI)3LnCl6 (Ln = Sm, Eu, Dy, Er, Yb) crystals was prepared from solutions of LnCl3 dissolved in the ionic liquid, 1-butyl-3-methylimidazolium chloride (BMICl). Crystals with Ln = 5% Sm + 95% Gd and with Ln = 5% Dy + 95% Gd were also grown to assess the importance of cross-relaxation in the Sm and Dy samples. The crystals are isostructural, with monoclinic space group P21/c and four formula units per unit cell. The first coordination sphere of Ln(3+) consists of six Cl(-) anions forming a slightly distorted octahedral LnCl6(3-) center. The second coordination sphere is composed of nine BMI(+) cations. The emission spectra and luminescence lifetimes of both (BMI)3LnCl6 crystals and LnCl3 in BMICl solution were measured. The spectroscopic similarities suggest that crystalline (BMI)3LnCl6 provides a good model of the Ln(3+) coordination environment in BMICl solution.

  14. TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

    PubMed

    Gao, Yanan; Han, Shuaibing; Han, Buxing; Li, Ganzuo; Shen, Dong; Li, Zhonghao; Du, Jimin; Hou, Wanguo; Zhang, Gaoyong

    2005-06-21

    Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C. The water-in-bmimPF6, bicontinuous, and bmimPF6-in-water microregions of the microemulsions were identified by cyclic voltammetry method using potassium ferrocyanide K4Fe(CN)6 as the electroactive probe. Dynamic light scattering (DLS) and the UV-vis method were used to characterize the microemulsions. It was demonstrated that the hydrodynamic diameter (Dh) of the bmimPF6-in-water microemulsions is nearly independent of the water content but increases with increasing bmimPF6 content due to the swelling of the micelles by the ionic liquid. The UV-vis further confirmed the existence of water domains in the water-in-bmimPF6 microemulsions, and the salt potassium ferricyanide K3Fe(CN)6 could be dissolved in the water domains.

  15. MICROWAVE-ASSISTED PREPARATION OF 1-BUTYL-3-METHYLIMIDAZOLIUM TETRACHLOROGALLATE AND ITS CATALYTIC USE IN ACETAL FORMATION UNDER MILD CONDITIONS

    EPA Science Inventory

    1-Butyl-3-methylimidazolium tetrachlorogallate, [bmim][GaCl4], prepared via microwave-assisted protocol, is found to be an active catalyst for the efficient acetalization of aldehydes under mild conditions.

  16. Asymmetric criticality of binary ionic solutions containing 1-butyl-3-methylimidazolium tetrafluoroborate and alcohol.

    PubMed

    Yin, Tianxiang; Xu, Chen; Lv, Hekun; Liu, Shixia; Wang, Mingjie; Chen, Zhiyun; Shen, Weiguo

    2014-09-07

    The liquid-liquid coexistence curves for binary solutions {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 1-propanol} and {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 2-propanol} have been precisely measured. The values of the critical exponents β obtained from the liquid-liquid equilibrium data in the critical region confirmed the 3D-Ising universality. The isobaric heat capacities per unit volume were measured for {[C4mim][BF4] + 1-propanol (or 2-propanol, 1,3-propanediol, 1,4-butanediol)} in both critical and non-critical regions. The experimental results indicate a major solvophobic contribution to the criticality for the studied ionic solutions. The complete scaling theory was applied to well represent the asymmetric behavior of the diameter of the coexistence curves with the consideration of the heat capacity contribution. It was found that the contribution of the heat capacity related term in the ionic solution decreased with the increase of the permittivity of alcohol and was more important in the description of the asymmetry of the coexistence curve of the ionic solutions than that of the molecular solutions.

  17. Phase behavior and microstructure of microemulsions containing the hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate.

    PubMed

    Anjum, Nishat; Guedeau-Boudeville, Marie-Alice; Stubenrauch, Cosima; Mourchid, Ahmed

    2009-01-08

    The phase behavior and microstructure of the ternary system water/1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6))/Triton X-100 was studied as a function of temperature and ionic liquid (IL) mass fraction alpha. In the present study, a hydrophobic IL instead of commonly used organic solvents such as n-alkanes is used. The fish-shaped region is distorted at low and high values of alpha, whereas it is symmetric at intermediate alpha. With increasing alpha, the extension of the three-phase region decreases regarding the surfactant concentration range, whereas it increases regarding the temperature range. For comparison the phase behavior of two ternary water/bmimPF(6)/alkyl oligoethyleneoxide (C(i)E(j)) systems has been investigated. Our results are compared with those obtained for water/n-alkane/C(i)E(j) and IL/n-alkane/C(i)E(j) systems, respectively.

  18. Green polymer electrolytes based on chitosan and 1-butyl-3-methylimidazolium acetate

    SciTech Connect

    Shamsudin, Intan Juliana; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2014-09-03

    Green polymer electrolytes based on chitosan as the polymer matrix and ionic liquid 1-butyl-3-methylimidazolium acetate [Bmim][OAc] as charge carriers were prepared by solution casting technique. Complexes with various amount of ionic liquid loading were investigated as possible ionic conducting polymers. The ionic conductivity was found to increase with increasing weight percent of ionic liquid. The highest ionic conductivity of the charged chitosan-[Bmim][OAc] was 2.44 × 10{sup −3} S cm{sup −1} at 90 wt.% of [Bmim][OAc] content at ambient temperature. Attenuated Total Reflection Fourier Transform infrared (ATR-FTIR) spectroscopy has proven the interaction between chitosan and [Bmim][OAc]. X-ray Diffraction (XRD) has shown that the amorphosity of the complexes increase as the amount of [Bmim][OAc] increase.

  19. FE-SEM observation of swelled seaweed using hydrophilic ionic liquid; 1-butyl-3-methylimidazolium tetrafluoroborate.

    PubMed

    Takahashi, Chisato; Shirai, Takashi; Fuji, Masayoshi

    2013-01-01

    The method to observe the exact morphology of swelled seaweed as an example of biological material by field emission scanning electron microscopy (FE-SEM) with the aid of hydrophilic ionic liquid (IL); 1-butyl-3-methylimidazolium tetrafluoroborate is reported. Seaweed was first swelled in 3.5% NaCl solution and then treated with the IL and water mixture in 1:7 weight ratios and centrifuged to remove the excess IL solution. Thus treated seaweed maintained its morphology even at high magnification and did not show drying in the FE-SEM chamber. This observation technique might be useful for various kinds of biological materials to be observed under FE-SEM.

  20. Synthesis, characterization, and application of 1-butyl-3-methylimidazolium thiocyanate for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Wasewar, Kailas L; Varma, Mahesh N; Shende, Diwakar Z

    2016-05-01

    1-Butyl-3-methylimidazolium thiocyanate [BMIM]SCN has been presented on extractive desulfurization of liquid fuel. The FTIR, (1)H-NMR, and C-NMR have been discussed for the molecular confirmation of synthesized [BMIM]SCN. Further, thermal, conductivity, moisture content, viscosity, and solubility analyses of [BMIM]SCN were carried out. The effects of time, temperature, sulfur compounds, ultrasonication, and recycling of [BMIM]SCN on removal of dibenzothiophene from liquid fuel were also investigated. In extractive desulfurization, removal of dibenzothiophene in n-dodecane was 86.5 % for mass ratio of 1:1 in 30 min at 30 °C under the mild process conditions. [BMIM]SCN could be reused five times without a significant decrease in activity. Also, in the desulfurization of real fuels, multistage extraction was examined. The data and results provided in the present paper explore the significant insights of imidazolium-based ionic liquids as novel extractant for extractive desulfurization of liquid fuels.

  1. Electrical conductivity and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

    NASA Astrophysics Data System (ADS)

    Sangoro, J.; Iacob, C.; Serghei, A.; Naumov, S.; Galvosas, P.; Kärger, J.; Wespe, C.; Bordusa, F.; Stoppa, A.; Hunger, J.; Buchner, R.; Kremer, F.

    2008-06-01

    Broadband dielectric and terahertz spectroscopy (10-2-10+12 Hz) are combined with pulsed field gradient nuclear magnetic resonance (PFG-NMR) to explore charge transport and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. The dielectric spectra are interpreted as superposition of high-frequency relaxation processes associated with dipolar librations and a conductivity contribution. The latter originates from hopping of charge carriers on a random spatially varying potential landscape and quantitatively fits the observed frequency and temperature dependence of the spectra. A further analysis delivers the hopping rate and enables one to deduce-using the Einstein-Smoluchowski equation-the translational diffusion coefficient of the charge carriers in quantitative agreement with PFG-NMR measurements. By that, the mobility is determined and separated from the charge carrier density; for the former, a Vogel-Fulcher-Tammann and for the latter, an Arrhenius temperature dependence is obtained. There is no indication of a mode arising from the reorientation of stable ion pairs.

  2. Surfactant-free microemulsions of 1-butyl-3-methylimidazolium hexafluorophosphate, propylamine nitrate, and water.

    PubMed

    Xu, Jie; Deng, Huanhuan; Fu, Yunlei; Chen, Yuquan; Zhang, Jing; Hou, Wanguo

    2017-03-08

    Generally, surfactants (or amphiphiles) are believed to be necessary components of microemulsions. However, it has been demonstrated that, in the absence of traditional surfactants, microemulsions can also form from a ternary system of two immiscible fluids (i.e., oil and water phases) and an amphi-solvent, but the current understanding of such surfactant-free microemulsions (SFMEs) is very limited. Herein, we report an SFME consisting of the hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), the protic IL propylamine nitrate (PAN), and water, in which bmimPF6 and PAN are used as the oil phase and the amphi-solvent, respectively. The microstructures and structural transitions of the SFME were investigated using cyclic voltammetry, fluorescence spectroscopy, and ultraviolet-visible spectroscopy. The SFME exhibited water-in-bmimPF6 (W/IL), bicontinuous (BC), and bmimPF6-in-water (IL/W) microstructures, depending on the composition of the ternary system, similar to the case of traditional surfactant-based microemulsions (SBMEs). The three kinds of microstructures were confirmed by cryogenic transmission electron microscopy (cryo-TEM) observations. To the best of our knowledge, this is the first report on SFMEs composed of two ILs as components, especially where one is used as the amphi-solvent.

  3. Understanding the dissolution of cellulose in 1-butyl-3-methylimidazolium acetate+DMAc solvent.

    PubMed

    Xu, Airong; Guo, Xin; Xu, Rui

    2015-11-01

    Cellulose solvent ([C4mim][CH3COO]/DMAc) could be obtained by adding N,N-dimethylacetamide (DMAc) in 1-butyl-3-methylimidazolium acetate ([C4mim][CH3COO]). The solubilities of cellulose in [C4mim][CH3COO]/DMAc solvents were determined at 25°C. The effects of molar ratio of DMAc to [C4mim][CH3COO] on cellulose solubility and the possible dissolution mechanism of cellulose in [C4mim][CH3COO]/DMAc solvent have been studied. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). It was found that, cellulose was more readily dissolved in [C4mim][CH3COO]/DMAc solvent than in a neat [C4mim][CH3COO], which mainly attributed to the increased "free" [CH3COO](-) anions and [C4mim](+) cations which result from the dissociation of [C4mim][CH3COO] by DMAc. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent displayed good thermostability and similar molecular structure to the original cellulose.

  4. Multiprobe Spectroscopic Inverstigation of Molecular-level Behavior within Aqueous 1-Butyl-3-methylimidazolium Tetrafluoroborate

    SciTech Connect

    Sarkar, Abhra; Ali, Maroof; Baker, Gary A; Tetin, Sergey Y.; Ruan, Qiaoqiao; Pandey, Siddharth

    2009-01-01

    In this work, an array of molecular-level solvent featuressincluding solute-solvent/solvent-solvent interactions, dipolarity, heterogeneity, dynamics, probe accessibility, and diffusionswere investigated across the entire composition of ambient mixtures containing the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4], and pH 7.0 phosphate buffer, based on results assembled for nine different molecular probes utilized in a range of spectroscopic modes. These studies uncovered interesting and unusual solvatochromic probe behavior within this benchmark mixture. Solvatochromic absorbance probessa watersoluble betaine dye (betaine dye 33), N,N-diethyl-4-nitroaniline, and 4-nitroanilineswere employed to determine ET (a blend of dipolarity/polarizability and hydrogen bond donor contributions) and the Kamlet-Taft indices * (dipolarity/polarizability), R (hydrogen bond donor acidity), and (hydrogen bond acceptor basicity) characterizing the [bmim][BF4] + phosphate buffer system. These parameters each showed a marked deviation from ideality, suggesting selective solvation of the individual probe solutes by [bmim][BF4]. Similar conclusions were derived from the responses of the fluorescent polarity-sensitive probes pyrene and pyrene-1-carboxaldehyde. Importantly, the fluorescent microfluidity probe 1,3-bis(1-pyrenyl)propane senses a microviscosity within the mixture that significantly exceeds expectations derived from simple interpolation of the behavior in the neat solvents. On the basis of results from this probe, a correlation between microviscosity and bulk viscosity was established; pronounced solvent-solvent hydrogen-bonding interactions were implicit in this behavior. The greatest deviation from ideal additive behavior for the probes studied herein was consistently observed to occur in the buffer-rich regime. Nitromethane-based fluorescence quenching of pyrene within the [bmim][BF4] + phosphate buffer system showed unusual compliance with a sphere

  5. Synthesis and thermodynamic properties of a new task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Dan; Han, Chun; Fan, Hong-Tao

    2015-07-01

    Task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate ([BMI]Sal) was synthesized in two steps. In the temperature range of 298.15-353.15 K, the density and surface tension for pure ionic liquid were determined and the thermodynamic properties of the ionic liquid were discussed in terms of Glasser's theory. The standard molar entropy and lattice energy for [BMI]Sal have been estimated. In addition, the thermal expansion coefficient, α = 5.53 × 10-4 K-1, calculated by the interstice model is in extreme agreement with α (experimental) = 5.50 × 10-4 K-1.

  6. ALPHA-AMYLASE ACTIVITY IN VARIOUS CONCENTRATIONS OF THE IONIC LIQUID, 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch is an extremely abundant, economical and versatile industrial commodity. Many industrial uses of starch depend on hydrolyzing the polymer for the conversion of glucose and maltodextrins. Starch hydrolysis is frequently achieved by utilizing alpha-amylase, which is an endo-acting enzyme that...

  7. Glycine in 1-butyl-3-methylimidazolium acetate and trifluoroacetate ionic liquids: effect of fluorination and hydrogen bonding.

    PubMed

    Podgoršek, Ajda; Macchiagodena, Marina; Ramondo, Fabio; Costa Gomes, Margarida F; Pádua, Agílio A H

    2012-05-14

    The solvation of glycine in two ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate, [C(1)C(4)Im][OAc], and 1-butyl-3-methylimidazolium trifluoroacetate, [C(1)C(4)Im][TFA], was studied by a combination of experimental and theoretical methods. The solubility of glycine in both ILs was determined at 333.15 K to be (8.1±0.5) and (1.0±0.5) wt % in [C(1)C(4)Im][OAc] and [C(1)C(4)Im][TFA], respectively. By IR spectroscopy it was found that, when dissolved in the ILs, glycine was mainly present in its zwitterionic form. Structural and energetic aspects of the solvation of glycine in the ILs and in mixtures of ILs and water were investigated by ab initio calculations and molecular dynamic simulations. It was observed that the firstly solvation shell around glycine consisted predominantly of acetate or trifluoroacetate anions, which formed hydrogen bonds either with the carboxylic group of neutral glycine or with the protonated ammonium group of the zwitterionic form. When water is present in the solutions, hydrogen bonds between water and the anion prevail. The overall energy of the system was decomposed into its components between pairs of species. It was established that the dominant contribution to the interaction energy between glycine and the IL was due to hydrogen bonds with the anions and the statistics of hydrogen bonds were analysed.

  8. The gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide from combustion calorimetry, vapor pressure measurements, and ab initio calculations.

    PubMed

    Emel'yanenko, Vladimir N; Verevkin, Sergey P; Heintz, Andreas

    2007-04-04

    Ionic liquids are attracting growing interest as alternatives to conventional molecular solvents. Experimental values of vapor pressure, enthalpy of vaporization, and enthalpy of formation of ionic liquids are the key thermodynamic quantities, which are required for the validation and development of the molecular modeling and ab initio methods toward this new class of solvents. In this work, the molar enthalpy of formation of the liquid 1-butyl-3-methylimidazolium dicyanamide, 206.2 +/- 2.5 kJ.mol-1, was measured by means of combustion calorimetry. The molar enthalpy of vaporization of 1-butyl-3-methylimidazolium dicyanamide, 157.2 +/- 1.1 kJ.mol-1, was obtained from the temperature dependence of the vapor pressure measured using the transpiration method. The latter method has been checked with measurements of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, where data are available from the effusion technique. The first experimental determination of the gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide, 363.4 +/- 2.7 kJ.mol-1, from thermochemical measurements (combustion and transpiration) is presented. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for 1-butyl-3-methylimidazolium dicyanamide using the G3MP2 theory. Excellent agreement with experimental results has been observed. The method developed opens a new way to obtain thermodynamic properties of ionic liquids which have not been available so far.

  9. Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

    SciTech Connect

    Fei, Beatrice Wong Chui; Hanifah, Sharina Abu; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2015-09-25

    Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10{sup −4} S cm{sup −1} at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

  10. Anomalous Freezing of Nano-Confined Water in Room-Temperature Ionic Liquid 1-Butyl-3-Methylimidazolium Nitrate.

    PubMed

    Abe, Hiroshi; Takekiyo, Takahiro; Yoshimura, Yukihiro; Saihara, Koji; Shimizu, Akio

    2016-04-18

    Non-crystal formation of ice is investigated by simultaneous X-ray diffraction and differential scanning calorimetry measurements upon cooling to -100 °C. At room temperature, size-tunable water confinement (≈20 Å size) in a room-temperature ionic liquid (RTIL, 1-butyl-3-methylimidazolium nitrate, [C4 mim][NO3 ]) exists in a water-rich region (70-90 mol % D2 O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C4 mim][NO3 ]-x mol % D2 O (70

  11. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    SciTech Connect

    Hashim, Muzna; Sun, Qining; Tao, Jingming; Wells, Jr., Tyrone; Shah, Aamer; Labbe, Nicole; Ragauskas, Arthur

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% from the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.

  12. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    DOE PAGES

    Hashim, Muzna; Univ. of Tennessee, Knoxville, TN; Sun, Qining; ...

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% frommore » the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.« less

  13. Photoisomerization of cyanine derivatives in 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol: Influence of specific interactions

    SciTech Connect

    Mali, K. S.; Dutt, G. B.; Mukherjee, T.

    2008-03-28

    Photoisomerization of two cyanine derivatives, 3,3{sup '}-diethyloxadicarbocyanine iodide (DODCI) and merocyanine 540 (MC 540), has been investigated in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol (93 wt % glycerol +7 wt % water) by measuring fluorescence lifetimes and quantum yields. The aim of this work is to understand how the rates of photoisomerization of DODCI and MC 540 are influenced by specific solute-solvent interactions besides the viscosity of the medium. For DODCI, it has been observed that the nonradiative rate constants, which represent the rates of photoisomerization, are almost identical in the ionic liquid and aqueous glycerol at given temperature, indicating that viscosity is the sole parameter that governs the rate of photoisomerization. In contrast, the photoisomerization rate constants of MC 540 have been found to be a factor of 2 higher in aqueous glycerol compared to the ionic liquid. The observed behavior is due to the zwitterionic character of MC 540, a consequence of which, the twisted state gets stabilized by the solute-solvent hydrogen bonding interactions in aqueous glycerol, thus lowering the barrier for isomerization.

  14. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    NASA Astrophysics Data System (ADS)

    Lísal, Martin; Izák, Pavel

    2013-07-01

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m2 at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  15. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface.

    PubMed

    Lísal, Martin; Izák, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m(2) at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  16. Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Zhang, Jin; Xu, Hongyan; Zhao, Xueyan; Zheng, Liqiang; Li, Xinwei; Yu, Li

    2006-07-17

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.

  17. Calorimetric determination of the enthalpy of 1-butyl-3-methylimidazolium bromide synthesis: a key quantity in thermodynamics of ionic liquids.

    PubMed

    Paulechka, Yauheni U; Kabo, Andrey G; Blokhin, Andrey V

    2009-11-05

    The enthalpy of the 1-butyl-3-methylimidazolium bromide [C(4)mim]Br ionic liquid synthesis reaction 1-methylimidazole (liq) + 1-bromobutane (liq) --> [C(4)mim]Br (liq) was determined in a homemade small-volume isoperibol calorimeter to be Delta(r)H degrees (298) = -87.7 +/- 1.6 kJ x mol(-1). The activation energy for this reaction in a homogeneous system E(A) = 73 +/- 4 kJ x mol(-1) was found from the results of calorimetric measurements. The formation enthalpies for the crystalline and liquid [C(4)mim]Br were determined from the calorimetric data: Delta(f)H degrees (298)(cr) = -178 +/- 5 kJ x mol(-1) and Delta(f)H degrees (298)(liq) = -158 +/- 5 kJ x mol(-1). The ideal-gas formation enthalpy of this compound Delta(f)H degrees (298)(g) = 16 +/- 7 kJ x mol(-1) was calculated using the methods of quantum chemistry and statistical thermodynamics. The vaporization enthalpy of [C(4)mim]Br, Delta(vap)H degrees (298) = 174 +/- 9 kJ x mol(-1), was estimated from the experimental and calculated formation enthalpies. It was demonstrated that vapor pressure of this ionic liquid cannot be experimentally determined.

  18. Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

    NASA Astrophysics Data System (ADS)

    Li, Junchun; Zhang, Jianling; Han, Buxing; Wang, Yong; Gao, Liang

    2004-10-01

    We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.

  19. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    SciTech Connect

    Lisal, Martin; Izak, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  20. The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles.

    PubMed

    Ferreyra, Darío D; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2012-03-14

    The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N

  1. Hydrogen bonding behaviors of binary systems containing the ionic liquid 1-butyl-3-methylimidazolium trifluoroacetate and water/methanol.

    PubMed

    Zhang, Qing-Guo; Wang, Nan-Nan; Wang, Shuang-Long; Yu, Zhi-Wu

    2011-09-29

    The hydrogen-bonding properties of binary systems consisting of a representative Brønsted acidic hydrophilic ionic liquid (IL) 1-butyl-3-methylimidazolium trifluoroacetate ([Bmim][CF(3)CO(2)]) and a cosolvent, water or methanol, over the entire concentration range have been investigated by methods of attenuated total reflectance infrared spectroscopy, (1)H NMR spectroscopy, and quantum chemical calculations. It has been found that the hydrogen-bonding interactions between the anion [CF(3)CO(2)](-), rather than the cation, and the cosolvent molecules are dominant at low concentration of cosolvent. The H-bond interaction site between the IL anion and water/methanol is the O atom in the -COO group, while the -CF(3) group makes a positive contribution by donating electron to the carboxylic group, forming a cooperative hydrogen-bonding system. For the cation [Bmim](+), although the C2-H is the favorable proton donor in H-bonding interactions, the water/methanol molecules form H-bonds with the alkyl C-H at low water/methanol concentration due to the stronger interaction between C2-H and [CF(3)CO(2)](-). Interestingly, we found that the interaction between methanol and the IL is stronger than that between water and the IL because the methyl group in methanol has a positive contribution to the formation of H-bonds. The following sequential order of interaction strength is established: [Bmim](+)-methanol-[CF(3)CO(2)](-) > [Bmim](+)-water-[CF(3)CO(2)](-) > [Bmim](+)-[CF(3)CO(2)](-) > [CF(3)CO(2)](-)-methanol > [CF(3)CO(2)] (-)-water > [Bmim](+)-methanol > [Bmim] (+)-water.

  2. The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Zhao, Xueyan; Zhang, Jin; Cao, Quan; Zhao, Mingwei; Li, Zhen; Zhang, Gaoyong

    2007-01-01

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.

  3. Role of solubilized water in the reverse ionic liquid microemulsion of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Bai, Xiangtao; Yu, Li; Zhao, Xueyan; Zhang, Jin; Zhao, Mingwei; Li, Zhen

    2007-03-15

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) can form nonaqueous microemulsions with benzene by the aid of nonionic surfactant TX-100. The effect of water on ionic liquid-in-oil (IL/O) microemulsions was studied, and it was shown that the addition of small amount of water to the IL microemulsion contributed to the stability of microemulsion and thus increased the amount of solubilized bmimBF4 in the microemulsion. The conductivity measurements also showed that the attractive interactions between IL microdroplets were weakened, that is, the IL/O microemulsion becomes more stable in the present of some water. Fourier transform IR was carried out to analyze the states of the added water, and the result showed that these water molecules mainly behaved as bound water and trapped water, indicating that the water molecules are located in the palisade layers of the IL/O microemulsion. Furthermore, 1H NMR and 19F NMR spectra suggested that the added water molecules built the hydrogen binding network of imidazolium cations and H2O, BF4- anion and H2O, and at the same time the electronegative oxygen atoms of the oxyethylene units of TX-100 and water in the palisade layers, which made the palisade layers more firm and thus increased the stability of the microemulsion. The study can help in further understanding the formation mechanism of microemulsions. In addition, the characteristic solubilization behavior of the added water can provide an aqueous interface film for hydrolysis reactions and therefore may be used as an ideal medium to prepare porous or hollow nanomaterials.

  4. New solvents designed on the basis of the molecular-microscopic properties of binary mixtures of the type (protic molecular solvent + 1-butyl-3-methylimidazolium-based ionic liquid).

    PubMed

    Fortunato, Graciela G; Mancini, Pedro M; Bravo, M Virginia; Adam, Claudia G

    2010-09-16

    The main purpose of this work is to analyze the microscopic feature of solvent systems resulting from the basis of binary mixtures formed by a protic molecular solvent (methanol, ethanol, propan-1-ol, propan-2-ol, and 2-ethoxyethanol) and a 1-butyl-3-methylimidazolium (bmim)-based ionic liquid (IL) cosolvent composed of different anions (tetrafluoroborate, hexafluorophosphate, chloride, and bromide). At the same time, a complementary aim is to evaluate the incidence of anion type on the solvation pattern. The empirical solvatochromic parameters E(T)(N), π*, β, and α were determined from the UV-vis solvatochromic shifts of adequate probes. The behavior of the solvent systems was analyzed according to their deviation from ideality. E(T)(N) polarity and π* dipolarity/polarizability exhibit positive deviation from ideal behavior in all binary mixtures at the explored compositions. Moreover, E(T)(N) and α parameters display synergetic effects in some binary mixtures composed of tetrafluoroborate and hexafluorophosphate anions. The influence of anion nature on the response patterns is clearly manifested in the basicity β and acidity α of the media. This is connected with the degree and type of interaction between the anions and the 1-butyl-3-methylimidazolium cation. The ion-pair character of the ionic liquids affects their interactions with a solute or a molecular solvent. The application of an appropriate preferential solvation model allowed us to obtain valuable information about solute-solvent and solvent-solvent interactions of the selected ionic liquid mixtures. It is possible to identify relevant mixtures paying particular attention to the most remarkable microscopic properties, the acidity and the basicity, in order to propose "new solvents". Thus, the solvating feature can be tailored selecting the molecular and/or the ionic component at a particular composition. A simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is

  5. Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium thiocyanate ionic liquid + organic solvent or water).

    PubMed

    Domańska, Urszula; Laskowska, M; Pobudkowska, Aneta

    2009-05-07

    (Solid + liquid) phase equilibria (SLE) for the binary systems, ionic liquid (IL) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN] with an alcohol (1-octanol, 1-nonanol, 1-decanol, 1-undecanol, or 1-dodecanol) or water, and (liquid + liquid) phase equilibria (LLE) for the binary systems of [BMIM][SCN] with an alkane (n-hexane, n-heptane, n-octane, n-nonane, or n-decane), benzene, an alkylbenzenes (toluene or ethylbenzene), tetrahydrofuran (THF), cycloalkanes (cyclohexane or cycloheptane), or ethers (di-n-propyl ether, di-n-butyl ether, di-n-pentyl ether, n-butylmethyl ether, tert-butylmethyl ether (MTBE), or tert-butylethyl ether (ETBE)) have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from 250 to 430 K. In the case of systems IL + alkane, cycloalkane, or ether, the mutual immiscibility with an upper critical solution temperature (UCST) was detected, and in the systems of IL + benzene, alkylbenzene, or THF, the mutual immiscibility with a lower critical solution temperature (LCST) was observed. UV-vis spectroscopy was used to determine the very small compositions of the IL in the n-hexane (about 2 x 10(-5) IL mole fraction), benzene (about 2 x 10(-3) IL mole fraction), cyclohexane (about 2 x 10(-5) IL mole fraction), and THF (about 1.2 x 10(-2) IL mole fraction). For the binary systems containing alcohol, it was noticed that with increasing chain length of an alcohol, the solubility decreases. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by the simultaneous TG/DTA experiments. Well-known UNIQUAC, Wilson, and NRTL equations have been used to correlate the experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + alkane

  6. Solvent and rotational relaxation of Coumarin-153 in a micellar solution of a room-temperature ionic liquid, 1-butyl-3-methylimidazolium octyl sulfate, in ethylammonium nitrate

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Ghatak, Chiranjib; Pramanik, Rajib; Sarkar, Souravi; Sarkar, Nilmoni

    2010-10-01

    We have investigated the micelle formation by room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium octyl sulfate (bmimOs) with another RTIL, ethyl ammonium nitrate (EAN). In addition, the effect of micelle formation on the solvation and rotational relaxation dynamics have been observed using steady-state and picoseconds time-resolved spectroscopy. Both the solvent and rotational relaxations of Coumarin-153 are retarded in the micelle compared to that of neat EAN. The increase in average solvation time on going from neat EAN to bmimOs-EAN micelle is very small compared to the increase in solvation time on going from pure water to water containing micelle.

  7. Experimental and theoretical investigation of multistage extraction of 1,3-propanediol using the extraction system phosphate/1-butyl-3-methylimidazolium trifluoromethanesulfonate/water.

    PubMed

    Müller, Anja; Lutze, Philip; Górak, Andrzej

    2013-01-01

    The separation of 1,3-propanediol from fermentation broth is a challenging and energy-demanding step using conventional unit operations. One alternative process is the use of an aqueous two-phase system incorporating ionic liquids to use synergy effects of both technologies. Within this manuscript, the technical feasibility of the extraction of 1,3-propanediol using the aqueous two-phase system phosphate (salt)/1-butyl-3-methylimidazolium trifluoromethanesulfonate (ionic liquid)/water in a continuously operated process in pilot-scale is presented. The extraction was performed in a multistage mixer-settler unit and successfully modeled with an equilibrium-stage model and correlations to describe the liquid-liquid equilibrium of the salt/ionic liquid/water two-phase system. The developed and validated model was used for a further investigation of the influence of different process parameters in the determined operating window. Theses parameters include the number of stages, the phase ratio, the pH, and the mass fraction of the involved components. The results prove that the phosphate and 1-butyl-3-methylimidazolium trifluoromethanesulfonate mass fraction, the phase ratio, and the number of stages have a considerable influence on the recovery of 1,3-propanediol, whereas the pH value has only a smaller impact. Those results can be used for optimization of the system as well as for targeting future research within this area.

  8. Synergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity

    PubMed Central

    2015-01-01

    An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities. PMID:25068078

  9. Interaction between amphiphilic ionic liquid 1-butyl-3-methylimidazolium octyl sulfate and anionic polymer of sodium polystyrene sulfonate in aqueous medium

    NASA Astrophysics Data System (ADS)

    Barhoumi, Z.; Saini, M.; Amdouni, N.; Pal, A.

    2016-09-01

    The micellization of an aqueous solution of the surface active ionic liquid (SAIL), 1-butyl-3-methylimidazolium octylsufate (C4mim)(C8OSO3) and its interaction with an anionic polymer sodium polystyrene sulfonate, (NaPSS) were studied using conductimetry, tensiometry and fluorimetry. Surface tension profile shows a more dramatic increase in the value of surface tension of aqueous (C4mim)(C8OSO3) before the critical micelle concentration (cmc) of IL. The critical micelle concentration (cmc) value of this surfactant was found out from conductance measurements. The thermodynamic parameters, i.e., Gibb's free energy, enthalpy, and entropy of micellization of the IL in aqueous solution have been calculated. Behavior of fluorescence probe confirms the binding interactions between SAIL and the polyelectrolyte.

  10. States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

    PubMed

    Li, Na; Cao, Quan; Gao, Yanan; Zhang, Jin; Zheng, Liqiang; Bai, Xiangtao; Dong, Bin; Li, Zhen; Zhao, Mingwei; Yu, Li

    2007-10-22

    We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions.

  11. Physical Properties of Ionic Liquids Consisting of the 1-Butyl-3-Methylimidazolium Cation with Various Anions and the Bis(trifluoromethylsulfonyl)imide Anion with Various Cations

    SciTech Connect

    Jin, Hui; O'Hare, Bernie; Dong, Jing; Arzhantsev, Sergei; Baker, Gary A; Wishart, James F.; Benesi, Alan; Maroncelli, Mark

    2008-01-01

    Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.

  12. Application of the Bahe's pseudolattice-theory to water-1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures at 298.15K Part I. Autoprotolysis constants.

    PubMed

    Bou Malham, I; Letellier, P; Turmine, M

    2007-04-15

    The autoprotolysis constants (K(s)) of water - 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures were determined at 298K over the composition range of 0 to 77.43vol.% bmimBF(4) using potentiometric method with a glass electrode. A slight increase in the autoprotolysis constant was observed when the salt was added to the water. The value of the ionic product of the medium then decreases as the bmimBF(4) content increases from about 20vol.%. The acid-base properties of these media were perfectly described by Bahe's approaches that were completed by Varela et al. concerning structured electrolyte solutions with large short-range interactions.

  13. Syntheses and crystal structures of two ionic liquids with halogen-bonding groups: 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates

    NASA Astrophysics Data System (ADS)

    Mukai, Tomohiro; Nishikawa, Keiko

    2010-05-01

    We have prepared and characterized two novel Lewis acidic ionic liquids, 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates, using differential scanning calorimetry and single-crystal X-ray analysis. The effect of the halogen species on the phase transition behaviour and the cation-anion interacting geometry was investigated. The minor difference in chemical structure strongly affects the melting point, glass transition temperature and crystal structure because of the different halogen-bonding strength and linearity between C-Br⋯O and C-I⋯O. Both the salts melt above room temperature, but the fused salts show glass-forming property and poor crystallizability.

  14. A novel, sensitive, reusable and low potential acetylcholinesterase biosensor for chlorpyrifos based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotubes gel.

    PubMed

    Zamfir, Lucian-Gabriel; Rotariu, Lucian; Bala, Camelia

    2011-04-15

    A novel, low potential and highly sensitive acetylcholinesterase (AChE) biosensor was developed based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotube composite gel thiocholine sensor. Composite gel promoted electron transfer reaction at a lower potential (+50 mV) and catalyzed electrochemical oxidation of thiocholine with high sensitivity. AChE was immobilized in sol-gel matrix that provides a good support for enzyme without any inhibition effect from the ionic liquid. The amount of immobilized enzyme and incubation time with chlorpyrifos were optimized. Chlorpyrifos could be determined in the range of 10(-8)-10(-6)M with a detection limit of 4 nM. Fast and efficient enzyme reactivation was obtained at low obidoxime concentration (0.1mM). Moreover, the biosensor exhibited a good stability and reproducibility and could be use for multiple determinations of pesticide with no loss of the enzyme activity.

  15. Vibrational sum-frequency generation spectroscopy of ionic liquid 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate at the air-water interface

    NASA Astrophysics Data System (ADS)

    Saha, Ankur; SenGupta, Sumana; Kumar, Awadhesh; Choudhury, Sipra; Naik, Prakash D.

    2016-08-01

    The structure and orientation of room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate [PF3(C2F5)3], commonly known as [bmim][fap], have been investigated at the air-[bmim][fap] and air-water interfaces, employing vibrational sum-frequency generation (VSFG) spectroscopy. The VSFG spectra in the CH stretch region suggest presence of the [bmim] cation at the interfaces. Studies reveal that the butyl chain protrudes out into air, and the imidazolium ring lies almost planar to the interface. The CH stretch intensities get enhanced at the air-water interface, mainly because of polar orientation of imidazolium cation induced by interfacial water molecules. The OH stretch intensities are also enhanced at the air-water interface due to polar orientation of interfacial water molecules induced by [bmim][fap]. The Brewster angle microscopy suggests self aggregation of [bmim][fap] in the presence of water, and the aggregation becomes extensive showing dense surface domains with time. However, the surface pressure is almost unaffected due to aggregation.

  16. How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

    PubMed

    Lépori, Cristian M O; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2016-01-21

    The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

  17. Electrochemical and Thermodynamic Properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) in 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid

    PubMed Central

    Yang, Xiao; He, Ling; Qin, Song; Tao, Guo-Hong; Huang, Ming; Lv, Yi

    2014-01-01

    The electrochemical behavior and thermodynamic properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) were studied in 1-butyl-3-methylimidazolium bromide ionic liquid (BmimBr) at a glassy carbon (GC) electrode in the range of 293–338 K. The electrode reaction of Eu(III) was found to be quasi-reversible by the cyclic voltammetry, the reactions of the other three lanthanide ions were regarded as irreversible systems. An increase of the current intensity was obtained with the temperature increase. At 293 K, the cathodic peak potentials of −0.893 V (Eu(III)), −0.596 V (Sm(III)), −0.637 V (Dy(III)) and −0.641 V (Nd(III)) were found, respectively, to be assigned to the reduction of Ln(III) to Ln(II). The diffusion coefficients (Do), the transfer coefficients (α) of Ln(III) (Ln = Eu, Sm, Dy, Nd) and the charge transfer rate constants (ks) of Eu(III) were estimated. The apparent standard potential (E0*) and the thermodynamic properties of the reduction of Eu(III) to Eu(II) were also investigated. PMID:24752584

  18. 1-Butyl-3-Methylimidazolium Tetrafluoroborate Film as a Highly Selective Sensing Material for Non-Invasive Detection of Acetone Using a Quartz Crystal Microbalance

    PubMed Central

    Tao, Wenyan; Lin, Peng; Liu, Sili; Xie, Qingji; Ke, Shanming; Zeng, Xierong

    2017-01-01

    Breath acetone serves as a biomarker for diabetes. This article reports 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), a type of room temperature ionic liquid (RTIL), as a selective sensing material for acetone. The RTIL sensing layer was coated on a quartz crystal microbalance (QCM) for detection. The sensing mechanism is based on a decrease in viscosity and density of the [bmim][BF4] film due to the solubilization of acetone leading to a positive frequency shift in the QCM. Acetone was detected with a linear range from 7.05 to 750 ppmv. Sensitivity and limit of detection were found to be 3.49 Hz/ppmv and 5.0 ppmv, respectively. The [bmim][BF4]-modified QCM sensor demonstrated anti-interference ability to commonly found volatile organic compounds in breath, e.g., isoprene, 1,2-pentadiene, d-limonene, and dl-limonene. This technology is useful for applications in non-invasive early diabetic diagnosis. PMID:28117697

  19. Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water.

    PubMed

    Gao, Yanan; Hilfert, Liane; Voigt, Andreas; Sundmacher, Kai

    2008-03-27

    In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.

  20. Physicochemical properties, structure, and conformations of 1-Butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim]NTf2 ionic liquid.

    PubMed

    Blokhin, Andrey V; Paulechka, Yauheni U; Strechan, Aliaksei A; Kabo, Gennady J

    2008-04-10

    Thermodynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim]NTf2) ionic liquid have been studied by adiabatic calorimetry in the temperature range of 5 to 370 K. This compound has been found to form crystal, liquid, and glass. The temperature and enthalpy of fusion for [C(4)mim]NTf(2) have been determined to be T(fus) = 270.22 +/- 0.02 K and Delta(fus)H = 23.78 +/- 0.04 kJ.mol(-1), respectively. The heat capacity of crystalline [C(4)mim]NTf(2) in the T range of 205 to 255 K may vary by a few percent, subject to the procedure of the crystal preparation. The glass transition temperature for [C(4)mim]NTf(2) has been found to be T(g) = 181.5 +/- 0.1 K. On the basis of the results of DFT quantum chemical calculations, the experimental vibrational spectra, and the available literature data, thermodynamic properties of [C(4)mim]NTf(2) in the ideal-gas state have been calculated by the statistical thermodynamic methods. The entropy values for the gaseous compound obtained from the experimental data and the calculations are in satisfactory agreement.

  1. Simultaneous separation of basic and acidic proteins using 1-butyl-3-methylimidazolium-based ion liquid as dynamic coating and background electrolyte in capillary electrophoresis.

    PubMed

    Wu, Xiaoping; Wei, Weiping; Su, Qingmei; Xu, Liangjun; Chen, Guonan

    2008-06-01

    1-Butyl-3-methylimidazolium tetrafluoroborate ionic liquids (1B-3MI-TFB ILs) were employed as a coating material and BGE in CE for simultaneous separation of basic and acidic proteins such as lysozyme, cytochrome C, ribonuclease A, albumin, and alpha-lactalbumin. 1B-3MI-TFB ILs effectively reversed the surface charges on the capillary inner surface, preventing the adsorption of positively charged proteins onto the silica surface, as well as associated with proteins, thus benefiting the separation efficiencies and reproducibility. Consequently, simultaneous baseline separation of five proteins was achieved within 14 min by using 10 mM of 1B-3MI-TFB ILs as dynamic coating and the only running electrolyte at the voltage of +20 kV. The proposed coating technique is simple, less time-consuming, reproducible, and also stable enough for proteins separation without the need of additives. Symmetrical peaks with efficiencies up to 670,000 plates/m were obtained. Recoveries of proteins with RSD (for migration times) of 0.23-0.42% (run-to-run) and 2.5-3.8% (day-to-day) were achieved, respectively. The applicability of the proposed method in proteins separation was evaluated by the separation of egg white samples.

  2. Mechanical exfoliation of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) providing graphene nanoplatelets that exhibit enhanced electrocatalysis

    NASA Astrophysics Data System (ADS)

    Hayes, William Ignatius; Lubarsky, Gennady; Li, Meixian; Papakonstantinou, Pagona

    2014-12-01

    A novel production method for graphene nanoplatelets (GPs) with enhanced electrocatalytic behaviour is presented. GPs show improvement in their oxygen reduction reaction (ORR) catalysis after prolonging the grinding of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6). Nitrogen doping of the GPs has inferred a further increase in ORR. The ORR onset potential, cathodic current magnitude and electron transfer efficiency have all improved as a direct consequence of increasing the graphite grinding duration from 30 min to 4 h. Atomic force microscopy has confirmed a decrease in the GP diameter and height as the grinding increases. Raman spectroscopy indicates a higher level of defects present after prolonging the graphite grinding in BMIM-PF6, most likely a result of the increased edge plane exposure. This increased edge plane appears to promote a higher level of nitrogen incorporation as the graphite grinding duration increases, as confirmed by X-ray photoelectron spectroscopy analysis. The stability of the cathodic current assessed by chronoamperometry analysis is higher for the GP and nitrogen doped graphene nanoplatelet (N-GP) samples than the platinum on carbon black (Pt/C). This study presents a novel process for the production of nitrogen doped graphene nanoplatelets, constituting a strategy for the up-scaled production of electrocatalysts.

  3. Amplified electrochemical sensor employing CuO/SWCNTs and 1-butyl-3-methylimidazolium hexafluorophosphate for selective analysis of sulfisoxazole in the presence of folic acid.

    PubMed

    Karimi-Maleh, Hassan; Amini, Fatemeh; Akbari, Ahmad; Shojaei, Moein

    2017-06-01

    In the present work, CuO nanoparticle decorated on single wall carbon nanotubes (CuO/SWCNTs) nanocomposite was successfully synthesized by chemical precipitation method and used for modification of carbon paste electrode (CPE) in the presence of 1-butyl-3-methylimidazolium hexafluorophosphate (1-B-3-MIHFP) liquid as binder. The novel voltammetric sensor was used as first electrochemical sensor for determination of sulfisoxazole (SFX). CuO/SWCNTs nanocomposite characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD) methods. Voltammetric methods such as cyclic voltammetry, square wave voltammetry (SWV), electrochemical impedance spectroscopy (EIS) and chronoamperometry were performed to assess the electrochemical performance of CuO/SWCNTs/1-B-3-MIHFP/CPE towards SFX in aqueous solution. The voltammetric obtained data confirm the significant enhancement of oxidation current and reduction overvoltage for electro-oxidation of SFX at a surface of CuO/SWCNTs/1-B-3-MIHFP/CPE. The square wave voltammetric response shows the linear increment of oxidation signals with an increase in the concentration of SFX in the range of 0.08-650μM with limit of detection 0.04μM. Using CuO/SWCNTs/1-B-3-MIHFP/CPE the SFX and folic acid peaks are separated ca. 0.72 and 0.895V, respectively; hence SFX can be detected in the presence of folic acid. Finally, the CuO/SWCNTs/1-B-3-MIHFP/CPE was used as high sensitive tools for analysis of SFX and folic acid in real samples.

  4. Conductivity and spectroscopic investigation of bis(trifluoromethanesulfonyl)imide solution in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide.

    PubMed

    Yu, Lei; Pizio, Benjamin S; Vaden, Timothy D

    2012-06-07

    Protic ionic liquids (PILs) are promising alternatives to water for swelling Nafion as a fuel cell proton exchange membrane (PEM). PILs can significantly improve the high-temperature performance of a PEM. The proton dissociation and solvation mechanisms in a PIL, which are keys to understanding the proton transportation and conductivity, have not been fully explored. In this paper, we used FTIR, Raman, and electronic spectroscopy with computational simulation techniques to explore the spectroscopic properties of bis(trifluoromethanesulfonyl)imide (HTFSI) solutions in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI) ionic liquid at concentrations from ∼0.1 to as high as ∼1.0 M. Solution conductivities were measured at room temperature and elevated temperatures up to ∼65 °C. The solution structure and properties depend on the concentration of HTFSI. At lower concentration, around 0.1 M, the HTFSI solution has higher conductivity than pure BMITFSI. However, the conductivity decreases when the concentration increases from 0.1 to 1.0 M. Temperature-dependent conductivities followed the Vogel-Fulcher-Tamman equation at all concentrations. Conductivity and spectroscopy results elucidate the complicated ionization and solvation mechanism of HTFSI in BMITFSI solutions. Raman spectroscopy and density functional theory (DFT) calculations are consistent with the complete ionization of HTFSI to generate solvated H(+) at low concentrations. FTIR, Raman, and electronic spectroscopic results as well as DFT computational simulation indicated that when the concentration is as high as 1.0 M, a significant amount of TFSI(-) is protonated, most likely at the imide nitrogen.

  5. Electrochemical and spectral properties of ferrocene (Fc) in ionic liquid: 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)]. Concentration effects.

    PubMed

    Vorotyntsev, Mikhail A; Zinovyeva, Veronika A; Konev, Dmitry V; Picquet, Michel; Gaillon, Laurent; Rizzi, Cecile

    2009-01-29

    Several earlier studies of the electrochemical oxidation of ferrocene (Fc) in room-temperature ionic liquids revealed an essentially nonlinear dependence of the oxidation current on the Fc concentration in its relatively dilute solutions, with its formally calculated diffusion coefficient strongly increasing with the concentration. Since no plausible mechanism leading to this very unusual finding had been proposed, our study of Fc solutions in 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)], was performed to verify whether the above observation originated from an incorrect determination of the dissolved Fc concentration. Our observations have demonstrated that reliable control of the Fc concentration in solution is complicated by factors such as the low amount of Fc used to prepare small-volume solutions or the great difficulty to dissolve completely a solid powder in a solvent with an extremely high viscosity. An unexpected additional complication is related to a sufficiently high volatility of Fc which manifests itself even at room temperature and especially at elevated temperatures or/and in the course of vacuum treatment of its solutions or its solid powder. Parallel measurements of electrochemical responses and UV-visible spectra for several series of Fc solutions of various concentrations (prepared with the use of different procedures) have shown a perfect parallelism between the peak current and the intensity of the absorption band in the range of 360-550 nm, leading us to the conclusion of a linear relationship between the oxidation current and the molecularly dissolved Fc concentration. The relations of these measured characteristics with the estimated Fc concentration in these solutions have demonstrated a much greater dispersion (attributed to the difficulty of a precise measurement of the latter) but without a significant deviation from the linearity in general. This finding has allowed us to estimate the diffusion coefficient of this species: D

  6. Ultrasound-promoted catalyst-free one-pot four component synthesis of 2H-indazolo[2,1-b]phthalazine-triones in neutral ionic liquid 1-butyl-3-methylimidazolium bromide.

    PubMed

    Shekouhy, Mohsen; Hasaninejad, Alireza

    2012-03-01

    A catalyst-free one-pot four component methodology for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones under ultrasonic irradiation at room temperature using 1-butyl-3-methylimidazolium bromide, [Bmim]Br, as a neutral reaction medium is described. A broad range of structurally diverse aldehydes (aromatic aldehydes bearing electron withdrawing and/or electron releasing groups as well as heteroaromatic aldehydes) were applied successfully, and corresponding products were obtained in good to excellent yields without any byproduct.

  7. Dynamics of solvent and rotational relaxation of coumarin 153 in room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate confined in Brij-35 micelles: a picosecond time-resolved fluorescence spectroscopic study.

    PubMed

    Chakraborty, Anjan; Seth, Debabrata; Chakrabarty, Debdeep; Setua, Palash; Sarkar, Nilmoni

    2005-12-15

    The dynamics of solvent and rotational relaxation of Coumarin 153 (C-153) in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and in the ionic liquid confined in Brij-35 micellar aggregates have been investigated using steady-state and time-resolved fluorescence spectroscopy. We observed slower dynamics in the presence of micellar aggregates as compared to the pure IL. However, the slowing down in the solvation time on going from neat IL to IL-confined micelles is much smaller compared to that on going from water to water-confined micellar aggregates. The increase in solvation and rotational time in micelles is attributed to the increase in viscosity of the medium. The slow component is assumed to be dependent on the viscosity of the solution and involves large-scale rearrangement of the anions and cations while fast component is assumed to originate from the initial response of the anions during excitation. The slow component increases due to the increase in the viscosity of the medium and increase in fast component is probably due to the hydrogen bonding between the anions and polar headgroup of the surfactant. The dynamics of solvent relaxation was affected to a small extent due to the micelle formation.

  8. Electrochemical reduction of aromatic ketones in 1-butyl-3-methylimidazolium-based ionic liquids in the presence of carbon dioxide: the influence of the ketone substituent and the ionic liquid anion on bulk electrolysis product distribution.

    PubMed

    Zhao, Shu-Feng; Horne, Mike; Bond, Alan M; Zhang, Jie

    2015-07-15

    Electrochemical reduction of aromatic ketones, including acetophenone, benzophenone and 4-phenylbenzophenone, has been undertaken in 1-butyl-3-methylimidazolium-based ionic liquids containing tetrafluoroborate ([BF4](-)), trifluoromethanesulfonate ([TfO](-)) and tris(pentafluoroethyl)trifluorophosphate ([FAP](-)) anions in the presence of carbon dioxide in order to investigate the ketone substituent effect and the influence of the acidic proton on the imidazolium cation (C2-H) on bulk electrolysis product distribution. For acetophenone, the minor products were dimers (<10%) in all ionic liquids, which are the result of acetophenone radical anion coupling. For benzophenone and 4-phenylbenzophenone, no dimers were formed due to steric hindrance. In these cases, even though carboxylic acids were obtained, the main products generated were alcohols (>50%) derived from proton coupled electron transfer reactions involving the electrogenerated radical anions and C2-H. In the cases of both acetophenone and benzophenone, the product distribution is essentially independent of the ionic liquid anion. By contrast, 4-phenylbenzophenone shows a product distribution that is dependent on the ionic liquid anion. Higher yields of carboxylic acids (∼40%) are obtained with [TfO](-) and [FAP](-) anions because in these ionic liquids the C2-H is less acidic, making the formation of alcohol less favourable. In comparison with benzophenone, a higher yield of carboxylic acid (>30% versus ∼15%) was obtained with 4-phenylbenzophenone in all ionic liquids due to the weaker basicity of 4-phenylbenzophenone radical anion.

  9. Interaction of ionic liquid with water in ternary microemulsions (Triton X-100/water/1-butyl-3-methylimidazolium hexafluorophosphate) probed by solvent and rotational relaxation of coumarin 153 and coumarin 151.

    PubMed

    Seth, Debabrata; Chakraborty, Anjan; Setua, Palash; Sarkar, Nilmoni

    2006-08-29

    The interaction of ionic liquid with water in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/Triton X-100 (TX-100)/H2O ternary microemulsions, i.e., "[bmim][PF6]-in-water" microregions of the microemulsions, has been studied by the dynamics of solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 151 (C-151). The variation of the time constants of solvent relaxation of C-153 is very small with an increase in the [bmim][PF6]/TX-100 ratio (R). The rotational relaxation time of C-153 also remains unchanged in all micremulsions of different R values. The invariance of solvation and rotational relaxation times of C-153 indicates that the position of C-153 remains unaltered with an increase in R and probably the probe is located at the interfacial region of [bmim][PF6] and TX-100 in the microemulsions. On the other hand, in the case of C-151, with an increase in R the fast component of the solvation time gradually increases and the slow component gradually decreases, although the change in solvation time is small in comparison to that of microemulsions containing common polar solvents such as water, methanol, acetonitrile, etc. The rotational relaxation time of C-151 increases with an increase in R. This indicates that with an increase in the [bmim][PF6] content the number of C-151 molecules in the core of the microemulsions gradually increases. In general, the solvent relaxation time is retarded in this room temperature ionic liquid/water-containing microemulsion compared to that of a neat solvent, although retardation is very small compared to that of the solvent relaxation time of the conventional solvent in the core of the microemulsions.

  10. Solvent and rotational relaxation of coumarin-153 and coumarin-480 in ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) modified sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) micelle

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Sarkar, Nilmoni

    2013-02-01

    Understanding ion transport dynamics, structure of surfactant aggregates in ionic liquids or ionic liquid/water solutions are quite interesting and potentially important due to widespread applications of surfactant-based systems. In this manuscript we have investigated the effect of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) addition on solvent and rotational relaxation of coumarin-153 (C-153) and coumarin-480 (C-480) in aqueous solution of sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) using steady state and picosecond time resolved fluorescence spectroscopy. The strong adsorption of the bmim+ at the interface and the role of the ionic liquid particularly the cation bmim+ in the modification of the interfacial geometry were probed by the analysis of decay parameters and the rotational relaxation parameters. Since the addition of the NaAOT in water-bmimBF4 mixture above critical micellar concentration (48 mM, obtained from observing pyrene fluorescence) causes strong adsorption of the ionic liquid particularly the cation bmim+, the average solvation time, particularly the slow component increases significantly. More importantly we have found the probe dependent solvation dynamics due to the different location of the probe molecules, C-153 and C-480. C-153 being hydrophobic in nature resides in the stern layer and the adsorption of the bmim+ at the interface modifies stern layer more effectively. So we have observed more pronounced change in solvation dynamics in case of C-153 compared to that in case of C-480. The fluorescence anisotropy decays of the probe molecules were found to be biexponential in nature. The anisotropy decay was interpreted by using a model which consists of the wobbling (rotational) and translational diffusion of the dye coupled with the rotational motion of the micelle as a whole.

  11. Electrospray of 1-Butyl-3-Methylimidazolium Dicyanamide Under Variable Flow Rate Operations

    DTIC Science & Technology

    2014-06-27

    between the cone and jet structure known as the neck . The second zone occurs at the jet breakup region located at the jet tip. Along with small ions...Droplets Extractor Ion Emission Zones Neck Fig. 1 Taylor cone structure and ion emission zones of a capillary emitter. Table 1 Physical properties of...varies as a ring of the integrated current hemisphere. Each ring has the circumference at the given angle on the hemisphere and a width of 0.85 mm

  12. Dielectric relaxation and solvation dynamics in a prototypical ionic liquid + dipolar protic liquid mixture: 1-butyl-3-methylimidazolium tetrafluoroborate + water.

    PubMed

    Zhang, Xin-Xing; Liang, Min; Hunger, Johannes; Buchner, Richard; Maroncelli, Mark

    2013-12-12

    Dielectric and solvation data on mixtures of 1-butyl-3-methylimidazilium tetrafluoroborate ([Im41][BF4]) + water are reported and used to examine the utility of dielectric solvation models. Dielectric permittivity and loss spectra (25 °C) were recorded over the frequency range 200 MHz to 89 GHz at 17 compositions and fit to a 4-Debye form. Dynamic Stokes shift measurements on the solute coumarin 153 (C153), made by combining fluorescence upconversion (80 fs resolution) and time-correlated single photon counting data (20 ns range), were used to determine the solvation response at 7 compositions (20.5 °C). All properties measured here were found to depend upon mixture composition in a simple continuous manner, especially when viewed in terms of volume fraction. Solvation response functions predicted by a simple dielectric continuum model are similar to but ∼7-fold faster than the spectral response functions measured with C153. The solvation data are in better agreement with the recently published predictions of a semimolecular model of Biswas and co-workers [J. Phys. Chem. B 2011, 115, 4011], but these latter predictions are systematically slow by a factor of ∼3.

  13. CRYSTAL POLYMORPHISM IN 1-BUTYL-3-METHYLIMIDAZOLIUM HALIDES: SUPPORTING IONIC LIQUID FORMATION THROUGH INHIBITION OF CRYSTALLIZATION. (R828257)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  14. Ionic liquid 1-butyl-3-methylimidazolium cyanamide (bmim [dca]) as a solvent and catalyst for acylation of maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have found a novel method to prepare maltodextrin stearate with DS upto 0.60 in 90% yields from maltodextrin in IL bmim[dca] reacted with vinyl stearate or stearic acid. In this work we have demonstrated that IL could simultaneously act as a solvent and as a catalyst for reaction of maltodextrin...

  15. Reactions of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We found that starches are found to be soluble at 80 ºC in ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-butyl-3-methylimidazolium dicyanamide (BMIMdca) in concentration up to 10% (w/w). Higher concentrations of biopolymers in these novel solvents resulted in solutions w...

  16. [Effects of imidazolium chloride ionic liquids on the acute toxicity and weight of earthworm].

    PubMed

    Huang, Ruo-Nan; Fan, Jun-Jie; Tu, Hong-Zhi; Tang, Ling-Yan; Liu, Hui-Jun; Xu, Dong-Mei

    2013-04-01

    Standard contact filter paper test of OECD and artificial soil test were used to study the acute lethal effect of three imidazolium chloride ionic liquids, 1-butyl- 3-methylimidazolium chloride ([Bmim] Cl), 1-hexyl- 3-methylimidazolium chloride ([Hmim] Cl), and 1-octyl- 3-methylimidazolium chloride ([Omim] Cl) on earthworm (Eisenia fetida), and the weight of the earthworms was measured after subtle exposure. The 24 h-LC50 values of [Bmim] Cl, [Hmim] Cl and [Omim] Cl using the contact filter paper method were 109.60, 50.38 and 7.94 microg x cm(-2), respectively. The 48 h-LC50 values were 98.52, 39.14 and 3.61 microg x cm(-2), respectively. Using the artificial soil method, the 7 d-LC50 values of [Bmim] Cl, [Hmim] Cl and [Omim] Cl were 447.78, 245.56 and 180.51 mg x kg(-1), respectively, and the 14 d-LC50 values were 288.42, 179.75, 150.35 mg x kg(-1), respectively. There were differences in poisoning symptoms of the three ionic liquids on earthworms. The growth of Eisenia fetida was inhibited and declined with increasing ionic liquid concentration. The toxicity of ionic liquids on Eisenia fetida increased with the length of carbon chain.

  17. Choline chloride-thiourea, a deep eutectic solvent for the production of chitin nanofibers.

    PubMed

    Mukesh, Chandrakant; Mondal, Dibyendu; Sharma, Mukesh; Prasad, Kamalesh

    2014-03-15

    Deep eutectic solvents (DESs) consisting of the mixtures of choline halide (chloride/bromide)-urea and choline chloride-thiourea were used as solvents to prepare α-chitin nanofibers (CNFs). CNFs of diameter 20-30 nm could be obtained using the DESs comprising of the mixture of choline chloride and thiourea (CCT 1:2); however, NFs could not be obtained using the DESs having urea (CCU 1:2) as hydrogen bond donor. The physicochemical properties of thus obtained NFs were compared with those obtained using a couple of imidazolium based ionic liquids namely, 1-butyl-3-methylimidazolium hydrogen sulphate [(Bmim)HSO4] and 1-methylimidazolium hydrogen sulphate [(Hmim)HSO4] as well as choline based bio-ILs namely, choline hydrogen sulphate [(Chol)HSO4] and choline acrylate. The CNFs obtained using the DES as a solvent were used to prepare calcium alginate bio-nanocomposite gel beads having enhanced elasticity in comparison to Ca-alginate beads. The bio-nanocomposite gel beads thus obtained were used to study slow release of 5-fluorouracil, an anticancer drug.

  18. Thermodynamic, Dynamic, and Structural Properties of Ionic Liquids Comprised of 1-butyl-3-methylimidazolium Cation and Nitrate, Azide, or Dicyanamide Anions

    DTIC Science & Technology

    2010-04-28

    Voth used a coarse-grained model to investigate spatial heterogeneities in alkyl imidazolium based ILs with NO3 anion.xxii These simulations showed... imidazolium -based cations and N3 anion have been reported in the literature. II. Simulation details. Subsequently to the publication of the original...by examining atomistic intermolecular pair distribution functions. Specifically, in Figure 3 we show g(r) between hydrogens on imidazolium ring (Hi

  19. Ultraviolet Photoionization Efficiency of the Vaporized Ionic Liquid 1-Butyl-3-Methylimidazolium Tricyanomethanide: Direct Detection of the Intact Ion Pair (Post Print)

    DTIC Science & Technology

    2012-09-21

    Lovelock , K. R. J.; Satterly, C. J.; Villar-Garcia, I. J. Phys. Chem. Chem. Phys. 2007, 9, 982−990. (11) Strasser, D.; Goulay, F.; Kelkar, M. S.; Maginn, E...J.; Leone, S. R. J. Phys. Chem. A 2007, 111, 3191−3915. (12) Lovelock , K. R. J.; Deyko, A.; Corfield, J.-A.; Gooden, P. N.; Licence, P.; Jones, R. G

  20. The importance of timescale for hydrogen bonding in imidazolium chloride ionic liquids.

    PubMed

    Skarmoutsos, Ioannis; Welton, Tom; Hunt, Patricia A

    2014-02-28

    Hydrogen bond (H-bond) dynamics have been investigated for "hot" 1-ethyl-3-methylimidazolium chloride and "cold" 1-butyl-3-methylimidazolium chloride ionic liquids (IL). While the average number of H-bonds remains constant for a ≈100 °C temperature change we show that the underlying dynamics of the H-bonding changes dramatically. H-bond dynamics are investigated based on distance and angle criteria, and on the H-bond state (zero, single or bifurcated H-bonds). Temperature effects on the cation ring reorientational dynamics are also examined. Angle deformations are found to be more important than bond stretching in determining the lifetime of individual H-bonds, and decay occurs on two time scales related to the magnitude of the deviation from linearity. Rapid angular oscillation of the anion breaks the H-bond (for the first time) and minimal temperature effects indicate that H-bonds are readily reformed even near the melting point. Intermittent H-bonds repeatedly break and reform over a longer timescale, and exhibit very strong temperature effects. In the hot IL H-bonding with ring and alkyl chain H-atoms occurs, ring reorientational dynamics is anisotropic and the corresponding lifetimes are similar to the intermittent H-bond lifetimes. In the cold IL ring H-atoms dominate the H-bonding and intermittent H-bonds last for ≈5 ns, ring reorientation occurs on a much slower timescale. The hot IL favours single H-bonds, but the individual ions often change, while the cold IL favours bifurcated H-bonds with the same co-located ions.

  1. Thermodynamical and structural properties of binary mixtures of imidazolium chloride ionic liquids and alcohols from molecular simulation

    NASA Astrophysics Data System (ADS)

    Raabe, Gabriele; Köhler, Jürgen

    2008-10-01

    We have performed molecular dynamics simulations to determine the densities, excess energies of mixing, and structural properties of binary mixtures of the 1-alkyl-3-methylimidazolium chloride ionic liquids (ILs) [amim][Cl] and ethanol and 1-propanol in the temperature range from 298.15to363.15K. As in our previous work [J. Chem. Phys. 128, 154509 (2008)], our simulation studies are based on a united atom model from Liu et al. [Phys. Chem. Chem. Phys. 8, 1096 (2006)] for the 1-ethyl- and 1-butyl-3-methylimidazolium cations [emim+] and [bmim+], which we have extended to the 1-hexyl-3-methylimidazolium [hmim+] cation and combined with parameters of Canongia Lopes et al. [J. Phys. Chem. B 108, 2038 (2004)] for the chloride anion [Cl-] and the force field by Khare et al. for the alcohols [J. Phys. Chem. B 108, 10071 (2004)]. With this, we provide both prediction for the densities of the mixtures that have mostly not been investigated experimentally yet and a molecular picture of the interactions between the alcohol molecules and the ions. The negative excess energies of all mixtures indicate an energetically favorable mixing of [amim][Cl] ILs and alcohols. To gain insight into the nonideality of the mixtures on the molecular level, we analyzed their local structures by radial and spatial distribution functions. These analyses show that the local ordering in these mixtures is determined by strong hydrogen-bond interactions between the chloride anion and the hydroxyls of the alcohols, enhanced interactions between the anion and the charged domain of the cation, and an increasing aggregation of the nonpolar alkyl tails of the alcohols and the cations with increasing cation size, which results in a segregation of polar and nonpolar domains.

  2. Understanding lignin treatment in dialkylimidazolium-based ionic liquid-water mixtures.

    PubMed

    Yan, Bing; Li, Kunlan; Wei, Ligang; Ma, Yingchong; Shao, Guolin; Zhao, Deyang; Wan, Wenying; Song, Lili

    2015-11-01

    The treatment of enzymatically hydrolyzed lignin (EHL) in dialkylimidazolium-based ionic liquid (IL)-water mixtures (50-100wt% IL content) was investigated at 150°C for 3h. pH, IL type, and IL content were found to greatly influence the degradation of lignin and the structure of regenerated lignin. 1-Butyl-3-methylimidazolium methylsulfonate-water mixtures with low pH facilitated lignin depolymerization but destroyed the regenerated lignin substructure. Regenerated lignin with low molecular weight and narrow polydispersity index (2.2-7.7) was obtained using a 1-butyl-3-methylimidazolium acetate-based system. Water addition inhibited lignin depolymerization at 50-100wt% IL content, except for 70wt% 1-butyl-3-methylimidazolium chloride-water mixture. Compared with pure IL treatment, obvious differences were observed in the breakdown of inter-unit linkages and ratio of syringyl to guaiacyl units in regenerated lignin with IL-water treatment.

  3. Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model.

    PubMed

    Lantz, Andrew W; Pino, Verónica; Anderson, Jared L; Armstrong, Daniel W

    2006-05-19

    The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces

  4. Properties of an ionic liquid-tolerant Bacillus amyloliquefaciens CMW1 and its extracellular protease.

    PubMed

    Kurata, Atsushi; Senoo, Humiya; Ikeda, Yasuyuki; Kaida, Hideaki; Matsuhara, Chiaki; Kishimoto, Noriaki

    2016-07-01

    An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF3SO3) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF3SO3). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF3SO3, [BMIM]Cl, [BMIM]CF3SO3, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0-12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.

  5. Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples.

    PubMed

    Xia, Gao; Jing, Fan; Guifen, Zhu; Xiaolong, Wang; Jianji, Wang

    2013-10-01

    A novel 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted solid-phase sorbent was synthesized. The as-prepared material was characterized by SEM, Brunauer-Emmett-Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C(n)mimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1-butyl-3-methyl imidazolium chloride ionic liquid. The average recoveries of 1-butyl-3-methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0-102.0% with the RSD lower than 5.8%.

  6. Ionic liquids-lithium salts pretreatment followed by ultrasound-assisted extraction of vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside and vitexin from Phyllostachys edulis leaves.

    PubMed

    Hou, Kexin; Chen, Fengli; Zu, Yuangang; Yang, Lei

    2016-01-29

    An efficient method for the extraction of vitexin, vitexin-4″-O-glucoside, and vitexin-2″-O-rhamnoside from Phyllostachys edulis leaves comprises heat treatment using an ionic liquid-lithium salt mixture (using 1-butyl-3-methylimidazolium bromide as the solvent and lithium chloride as the additive), followed by ultrasound-assisted extraction. To obtain higher extraction yields, the effects of the relevant experimental parameters (including heat treatment temperature and time, relative amounts of 1-butyl-3-methylimidazolium bromide and lithium chloride, power and time of the ultrasound irradiation, and the liquid-solid ratio) are evaluated and response surface methodology is used to optimize the significant factors. The morphologies of the treated and untreated P. edulis leaves are studied by scanning electron microscopy. The improved extraction method proposed provides high extraction yield, good repeatability and precision, and has wide potential applications in the analysis of plant samples.

  7. Organo-niobate Ionic Liquids: Synthesis, Characterization and Application as Acid Catalyst in Pechmann Reactions

    PubMed Central

    Soares, Valerio C. D.; Alves, Melquizedeque B.; Souza, Ernesto R.; Pinto, Ivana O.; Rubim, Joel C.; Andrade, Carlos Kleber Z.; Suarez, Paulo A. Z.

    2007-01-01

    The combinations of 1-butyl-3-methylimidazolium chloride with NbCl5 yielded ionic mixtures with different melting point temperatures and acidity depending on the niobium molar fraction. The mixtures were characterized by thermal (DSC) and spectroscopic (FT-IR and 1H NMR) analysis. The Pechmann reactions of different phenols with ethylacetoacetate, producing coumarins, was used as model to evaluate the catalytic behavior of these mixtures as acid Lewis catalyst. These reactions were carried out using acidic mixtures of 60 mol%.

  8. Cellulose/gold nanocrystal hybrids via an ionic liquid/aqueous precipitation route.

    PubMed

    Li, Zhonghao; Taubert, Andreas

    2009-11-18

    Injection of a mixture of HAuCl(4) and cellulose dissolved in the ionic liquid (IL) 1-butyl-3-methylimidazolium chloride [Bmim]Cl into aqueous NaBH4 leads to colloidal gold nanoparticle/cellulose hybrid precipitates. This process is a model example for a very simple and generic approach towards (noble) metal/cellulose hybrids, which could find applications in sensing, sterile filtration, or as biomaterials.

  9. Microemulsions with an ionic liquid surfactant and room temperature ionic liquids as polar pseudo-phase.

    PubMed

    Zech, Oliver; Thomaier, Stefan; Bauduin, Pierre; Rück, Thomas; Touraud, Didier; Kunz, Werner

    2009-01-15

    In this investigation we present for the first time microemulsions comprising an ionic liquid as surfactant and a room-temperature ionic liquid as polar pseudo-phase. Microemulsions containing the long- chain ionic liquid1-hexadecyl-3-methyl-imidazolium chloride ([C16mim][Cl]) as surfactant, decanol as cosurfactant, dodecaneas continuous phase and room temperature ionic liquids (ethylammonium nitrate (EAN) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim

  10. Sensor technologies based on a cellulose supported platform.

    PubMed

    Poplin, Jane Holly; Swatloski, Richard P; Holbrey, John D; Spear, Scott K; Metlen, Andreas; Grätzel, Michael; Nazeeruddin, Mohammad K; Rogers, Robin D

    2007-05-28

    A simple approach to sensor development based on encapsulating a probe molecule in a cellulose support followed by regeneration from an ionic liquid solution is demonstrated here by the codissolution of cellulose and 1-(2-pyridylazo)-2-naphthol in 1-butyl-3-methylimidazolium chloride followed by regeneration with water to form strips which exhibit a proportionate (1 : 1) response to Hg(II) in aqueous solution.

  11. Preparation of tamarind gum based soft ion gels having thixotropic properties.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2014-02-15

    Tamarind gum was used to prepare ion gels using both synthetic ionic liquids (ILs) namely 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium bromide and bio-based ionic liquids (Bio-ILs) namely choline acrylate, choline caproate and choline caprylate by heating cooling process. The gels were found to have good thermal stability and exhibited thixotropic behaviour. Upon relaxation after applied breaking strain, the recovery of gel structures after ten consecutive cycles was observed. The hydrogel of the gum prepared using ethanol aqueous solution had much inferior quality in terms of viscosity, viscoelasticity, thermal stability and thixotropicity when compared with the ion gels. The ion gels also showed very good adherence to human finger muscles and skin. The ion gels thus prepared may find application in electrochemistry, sensors, actuators and the gels prepared with Bio-ILs could even be useful in biomedical applications.

  12. Effect of the conditions of anodizing on the morphology of nanotitania

    NASA Astrophysics Data System (ADS)

    Root, N. V.; Kultin, D. Yu.; Kustov, L. M.; Kudryavtsev, I. K.; Lebedeva, O. K.

    2017-02-01

    The effect the current density, treatment time, surface pretreatment, and electrolyte composition have on the morphology of titania obtained via electrochemical treatment in such ionic liquids (ILs) as 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf2] and 1-butyl-3-methylimidazolium chloride [BMIM]Cl is studied. The anodic formation of titania nanostructures in the form of nanotubes or nanorods is found to occur in times of up to 100 s. The role of water in the formation of these titania nanostructures is shown. Pretreatment has no effect on the morphology of the formed oxide. The formation of products that are poorly soluble in ILs (e.g., hydrated oxides) results in the emergence of a layer partially covering the open parts of nanotubes, preventing their further growth.

  13. Spectroscopic properties and amplified spontaneous emission of fluorescein laser dye in ionic liquids as green media

    NASA Astrophysics Data System (ADS)

    AL-Aqmar, Dalal M.; Abdelkader, H. I.; Abou Kana, Maram T. H.

    2015-09-01

    The use of ionic liquids (ILs) as milieu materials for laser dyes is a promising field and quite competitive with volatile organic solvents and solid state-dye laser systems. This paper investigates some photo-physical parameters of fluorescein dye incorporated into ionic liquids; 1-Butyl-3-methylimidazolium chloride (BMIM Cl), 1-Butyl-3-methylimidazolium tetrachloroaluminate (BMIM AlCl4) and 1-Butyl-3-methylimidazolium tetrafluoroborate (BMIM BF4) as promising host matrix in addition to ethanol as reference. These parameters are: absorption and emission cross-sections, fluorescence lifetime and quantum yield, in addition to the transition dipole moment, the attenuation length and oscillator strength were also investigated. Lasing characteristics such as amplified spontaneous emission (ASE), the gain, and the photostability of fluorescein laser dye dissolved in different host materials were assessed. The composition and properties of the matrix of ILs were found that it has great interest in optimizing the laser performance and photostability of the investigated laser dye. Under transverse pumping of fluorescein dye by blue laser diode (450 nm) of (400 mW), the initial ASE for dye dissolved in BMIM AlCl4 and ethanol were decreased to 39% and 36% respectively as time progressed 132 min. Relatively high efficiency and high fluorescence quantum yield (11.8% and 0.82% respectively) were obtained with good photostability in case of fluorescein in BMIM BF4 that was decreased to ∼56% of the initial ASE after continuously pumping with 400 mW for 132 min.

  14. Ionic liquids influence on the surface properties of electron beam irradiated wood

    NASA Astrophysics Data System (ADS)

    Croitoru, Catalin; Patachia, Silvia; Doroftei, Florica; Parparita, Elena; Vasile, Cornelia

    2014-09-01

    In this paper, the influence of three imidazolium-based ionic liquids (1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-hexyl-3-methylimidazolium chloride) on the structure and surface properties of sycamore maple (Acer pseudoplatanus) veneers submitted to electron beam irradiation with a dose of 50 kGy has been studied by using Fourier transform infrared spectroscopy, as well as image, scanning electron microscopy/SEM/EDX, atomic force microscopy and contact angle analysis. The experimental results have proven that the studied ionic liquids determine a better preservation of the structural features of wood (cellulose crystallinity index and lignin concentration on the surface) as well as some of surface properties such as surface energy, roughness, color upon irradiation with electron beam, in comparison with the reference wood, but surface composition is changed by treatment with imidazolium-based ionic liquids mainly with 1-butyl-3-methylimidazolium tetrafluoroborate. Also, under electron beam irradiation covalent bonding of the imidazolium moiety to wood determines a higher resistance to water penetration and spreading on the surface.

  15. Understanding chemical reactions of CO{sub 2} and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS{sub 2} in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

    SciTech Connect

    Cabaço, M. Isabel; Besnard, Marcel; Danten, Yann; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J.; Coutinho, João A. P.

    2014-06-28

    NMR spectroscopy ({sup 1}H, {sup 13}C, {sup 15}N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS{sub 2} leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH{sub 3}COS{sup −}), CO{sub 2}, OCS, and trithiocarbonate (CS{sub 3}{sup 2−}). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]{sup +} cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS{sub 2}-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO{sub 2}-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS{sub 2} reacts with the acetate anion leading to the formation of CH{sub 3}COS{sup −}, CO{sub 2}, and OCS. After these reactions have proceeded the nascent CO{sub 2} and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO{sub 2}) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO{sub 2}-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO{sub 2} molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO{sub 2}, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS{sub 2} is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2)

  16. Understanding chemical reactions of CO2 and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: the case of CS2 in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations.

    PubMed

    Cabaço, M Isabel; Besnard, Marcel; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J; Coutinho, João A P; Danten, Yann

    2014-06-28

    NMR spectroscopy ((1)H, (13)C, (15)N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS2 leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH3COS(-)), CO2, OCS, and trithiocarbonate (CS3 (2-)). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro](+) cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS2-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO2-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS2 reacts with the acetate anion leading to the formation of CH3COS(-), CO2, and OCS. After these reactions have proceeded the nascent CO2 and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO2) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO2-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO2 molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO2, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS2 is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2).

  17. Fabrication and Characterization of Polysaccharide Ion Gels with Ionic Liquids and Their Further Conversion into Value-Added Sustainable Materials

    PubMed Central

    Takada, Akihiko; Kadokawa, Jun-ichi

    2015-01-01

    A review of the fabrication of polysaccharide ion gels with ionic liquids is presented. From various polysaccharides, the corresponding ion gels were fabricated through the dissolution with ionic liquids. As ionic liquids, in the most cases, 1-butyl-3-methylimidazolium chloride has been used, whereas 1-allyl-3methylimidazolium acetate was specifically used for chitin. The resulting ion gels have been characterized by suitable analytical measurements. Characterization of a pregel state by viscoelastic measurement provided the molecular weight information. Furthermore, the polysaccharide ion gels have been converted into value-added sustainable materials by appropriate procedures, such as exchange with other disperse media and regeneration. PMID:25793912

  18. Structural study of lysozyme in two ionic liquids at cryogenic temperature

    NASA Astrophysics Data System (ADS)

    Yoshimura, Yukihiro; Takekiyo, Takahiro; Mori, Takahiro

    2016-11-01

    We have investigated the structure and activity of chicken egg-white lysozyme in aqueous solutions of two typical ionic liquids, 1-butyl-3-methylimidazolium chloride and ethylammonium nitrate, at cryogenic temperature. An increase in structural disorder due to the unfolding and a decrease in the α-helical structure of lysozyme were noticeable upon glass formation. However, a decrease in the structural stability after cooling was less than that before cooling. The secondary and tertiary structures showed good reversibility upon cooling to 77 K and then reverting back to ambient temperature. We discussed an influence of a cooling upon the structure in aqueous ionic liquid solutions.

  19. Microwave-assisted rapid conversion of carbohydrates into 5-hydroxymethylfurfural by ScCl3 in ionic liquids.

    PubMed

    Zhou, Xuanmu; Zhang, Zehui; Liu, Bing; Xu, Zheng; Deng, Kejian

    2013-06-28

    In this study, synthesis of HMF from carbohydrates was carried out in ionic liquids 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) catalyzed by ScCl3 under microwave irradiation. Under the optimal reaction conditions, HMF was obtained in a high yield of 73.4% in 2 mins with the microwave power at 400 W. Compared with the conventional oil-bath heating manner, the use of microwave irradiation not only reduced reaction times from hours to minutes, but also improved HMF yield. This catalytic system could be reused several times without losing its catalytic activity. This efficient catalytic system will generate a promising application strategy for biomass transformation.

  20. Alkylation of Methyl Linoleate with Propene in Ionic Liquids in the Presence of Metal Salts.

    PubMed

    Pomelli, Christian Silvio; Ghilardi, Tiziana; Chiappe, Cinzia; de Angelis, Alberto Renato; Calemma, Vincenzo

    2015-12-07

    Vegetable oils and fatty acid esters are suitable precursor molecules for the production of a variety of bio-based products and materials, such as paints and coatings, plastics, soaps, lubricants, cosmetics, pharmaceuticals, printing inks, surfactants, and biofuels. Here, we report the possibility of using Lewis acidic ionic liquids (ILs) to obtain polyunsaturated ester dimerization-oligomerization and/or, in the presence of another terminal alkene (propene), co-polymerization. In particular, we have tested the Lewis acidic mixtures arising from the addition of a proper amount of GaCl₃ (Χ > 0.5) to two chloride-based (1-butyl-3-methylimidazolium chloride, [bmim]Cl, and 1-butylisoquinolium chloride, [BuIsoq]Cl) or by dissolution of a smaller amount of Al(Tf₂N)₃ (Χ = 0.1) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][Tf₂N]. On the basis of product distribution studies, [bmim][Tf₂N]/Al(Tf₂N)₃ appears the most suitable medium in which methyl linoleate alkylation with propene can compete with methyl linoleate or propene oligomerization.

  1. Chloride Test

    MedlinePlus

    ... of the imbalance. In persons with too much base, urine chloride measurements can tell the healthcare practitioner whether the cause ... healthcare practitioner will look at whether the chloride measurement changes ... an acid-base imbalance and helps to guide treatment. ^ Back to ...

  2. The Highly Selective and Near-Quantitative Conversion of Glucose to 5-Hydroxymethylfurfural Using Ionic Liquids

    PubMed Central

    Eminov, Sanan; Brandt, Agnieszka; Wilton-Ely, James D. E. T.

    2016-01-01

    A number of ionic liquids have been shown to be excellent solvents for lignocellulosic biomass processing, and some of these are particularly effective in the production of the versatile chemical building block 5-hydroxymethylfurfural (HMF). In this study, the production of HMF from the simple sugar glucose in ionic liquid media is discussed. Several aspects of the selective catalytic formation of HMF from glucose have been elucidated using metal halide salts in two distinct ionic liquids, 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium hydrogen sulfate as well as mixtures of these, revealing key features for accelerating the desired reaction and suppressing byproduct formation. The choice of ionic liquid anion is revealed to be of particular importance, with low HMF yields in the case of hydrogen sulfate-based salts, which are reported to be effective for HMF production from fructose. The most successful system investigated in this study led to almost quantitative conversion of glucose to HMF (90% in only 30 minutes using 7 mol% catalyst loading at 120°C) in a system which is selective for the desired product, has low energy intensity and is environmentally benign. PMID:27711238

  3. Functionalized Agarose Self-Healing Ionogels Suitable for Supercapacitors.

    PubMed

    Trivedi, Tushar J; Bhattacharjya, Dhrubajyoti; Yu, Jong-Sung; Kumar, Arvind

    2015-10-12

    Agarose has been functionalized (acetylated/carbanilated) in an ionic liquid (IL) medium of 1-butyl-3-methylimidazolium acetate at ambient conditions. The acetylated agarose showed a highly hydrophobic nature, whereas the carbanilated agarose could be dissolved in water as well as in the IL medium. Thermoreversible ionogels were obtained by cooling the IL sols of carbanilated agarose at room temperature. The ionogel prepared from a protic-aprotic mixed-IL system (1-butyl-3-methylimidazolium chloride and N-(2-hydroxyethyl)ammonium formate) demonstrated a superior self-healing property, as confirmed from rheological measurements. The superior self-healing property of such an ionogel has been attributed to the unique inter-intra hydrogen-bonding network of functional groups inserted in the agarose. The ionogel was tested as a flexible solid electrolyte for an activated-carbon-based supercapacitor cell. The measured specific capacitance was found to be comparable with that of a liquid electrolyte system at room temperature and was maintained for up to 1000 charge-discharge cycles. Such novel functionalized-biopolymer self-healing ionogels with flexibility and good conductivity are desirable for energy-storage devices and electronic skins with superior lifespans and robustness.

  4. Hydrogen chloride

    Integrated Risk Information System (IRIS)

    Hydrogen chloride ; CASRN 7647 - 01 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogeni

  5. Mepiquat chloride

    Integrated Risk Information System (IRIS)

    Mepiquat chloride ; CASRN 24307 - 26 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  6. Acetyl chloride

    Integrated Risk Information System (IRIS)

    Acetyl chloride ; CASRN 75 - 36 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  7. Methyl chloride

    Integrated Risk Information System (IRIS)

    EPA / 635 / R01 / 003 TOXICOLOGICAL REVIEW OF METHYL CHLORIDE ( CAS No . 74 - 87 - 3 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) June 2001 U.S . Environmental Protection Agency Washington , DC DISCLAIMER This document has been reviewed in accordance with U.

  8. Vinyl chloride

    Integrated Risk Information System (IRIS)

    EPA / 635R - 00 / 004 TOXICOLOGICAL REVIEW OF VINYL CHLORIDE ( CAS No . 75 - 01 - 4 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) May 2000 U.S . Environmental Protection Agency Washington , DC DISCLAIMER This document has been reviewed in accordance with U.S

  9. Ethyl chloride

    Integrated Risk Information System (IRIS)

    Ethyl chloride ; CASRN 75 - 00 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  10. Benzyl chloride

    Integrated Risk Information System (IRIS)

    Benzyl chloride ; CASRN 100 - 44 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic E

  11. Allyl chloride

    Integrated Risk Information System (IRIS)

    Allyl chloride ; CASRN 107 - 05 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  12. Dissolution of cellulose in ionic liquid: A review

    NASA Astrophysics Data System (ADS)

    Mohd, N.; Draman, S. F. S.; Salleh, M. S. N.; Yusof, N. B.

    2017-02-01

    Dissolution of cellulose with ionic liquids (IL) and deep eutectic solvent (DES) lets the comprehensive dissolution of cellulose. Basically, cellulose can be dissolved, in some hydrophilic ionic liquids, such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-allyl-3-methylimidazolium chloride (AMIMCl). Chloride based ionic liquids are suitable solvents for cellulose dissolution. Although the ILs is very useful in fine chemical industry, its application in the pharmaceutical and food industry have been very limited due to issues with toxicity, purity, and high cost. Seeing to these limitations, new green alternative solvent which is DES was used. This green solvents, may be definitely treated as the next-generation reagents for more sustainable industrial development. Thus, this review aims to discuss the dissolution of cellulose either with ionic liquids or DES and its application.

  13. Radiation stability of some room temperature ionic liquids

    NASA Astrophysics Data System (ADS)

    Jagadeeswara Rao, Ch.; Venkatesan, K. A.; Tata, B. V. R.; Nagarajan, K.; Srinivasan, T. G.; Vasudeva Rao, P. R.

    2011-05-01

    Radiation stability of some room temperature ionic liquids (RTILs) that find useful electrochemical applications in nuclear fuel cycle has been evaluated. The ionic liquids such as protonated betaine bis(trifluoromethylsulfonyl)imide (HbetNTf 2), aliquat 336 (tri-n-octlymethylammonium chloride), 1-butyl-3-methylimidazolium chloride (bmimCl), 1-hexyl-3-methylimidazolium chloride (hmimCl), N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMPyNTf 2) and N-methyl-N-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPiNTf 2) have been irradiated to various absorbed dose levels, up to 700 kGy. The effect of gamma radiation on these ionic liquids has been evaluated by determining the variations in the physical properties such as color, density, viscosity, refractive index and electrochemical window. The changes in density, viscosity and refractive index of these ionic liquids upon irradiation were insignificant; however, the color and electrochemical window varied significantly with increase of absorbed dose.

  14. [Te8][NbOCl4]2 containing an infinite chain-like {[Te-Te-Te-(Te5)]2+}n polycation.

    PubMed

    Feldmann, Claus; Freudenmann, Dominic

    2012-10-01

    The title compound, [Te(8)][NbOCl(4)](2), was obtained as translucent black crystals by reaction of elemental tellurium, niobium(V) chloride and niobium(V) oxychloride in the ionic liquid BMImCl (BMImCl is 1-butyl-3-methylimidazolium chloride). The synthesis was performed in argon-filled glass ampoules. According to X-ray structure analysis based on single crystals, the title compound crystallizes with triclinic lattice symmetry and consists of infinite {[Te(8)](2+)}(n) cations associated with pyramidal [NbOCl(4)](-) anions. The novel catena-octatellurium(2+) cation is composed of Te(5) rings that are linked via Te(3) units [Te-Te = 2.6455 (18)-2.8164 (19) Å]. The composition and purity of [Te(8)][NbOCl(4)](2) were further confirmed by energy-dispersive X-ray diffraction (EDX) analysis.

  15. Evaluation of a hydrophilic ionic liquid as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system for aqueous biphasic extraction separation.

    PubMed

    Hirayama, Naoki; Higo, Takaaki; Imura, Hisanori

    2012-01-01

    The use of a hydrophilic ionic liquid (IL), 1-butyl-3-methylimidazolium chloride (C(4)mimCl), as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system was studied for possible applications to novel aqueous biphasic extraction separation. The IL showed a salting-out phase-separation ability. Also, differences in the polarity between the formed two phases were smaller than that when using NaCl as a salting-out agent. This result suggested that C(4)mimCl remaining in water-rich phase acts not only as a salting-out agent, but also a component of a mixed-solvent. Possible uses of C(4)mimCl/NaCl mixed salting-out agent system were also discussed.

  16. The effect of surfactant-assisted ultrasound-ionic liquid pretreatment on the structure and fermentable sugar production of a water hyacinth.

    PubMed

    Chang, Ken-Lin; Han, Ye-Ju; Wang, Xiao-Qin; Chen, Xi-Mei; Leu, Shao-Yuan; Liu, Jing-Yong; Peng, Yen-Ping; Liao, Yu-Ling; Potprommanee, Laddawan

    2017-02-15

    This study investigated the possibility of enhancing the disruption of water hyacinth (WH) in an ultrasound-ionic liquid (US-IL) pretreatment assisted by sodium dodecyl sulfate (SDS). 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was used to dissolve the WH. The optimum concentration of SDS for the highest production of reducing sugar was also determined. Compared to the US-IL pretreatment, the production of reducing sugars, cellulose conversion and delignification were increased by 72.23%, 58.74% and 21.01%, respectively, upon addition of 0.5% SDS. Moreover, the enhancement of SDS in the US-IL pretreatment was confirmed by the analysis of structural features, which demonstrated that the SDS increased the removal of lignin and decreased the cellulose crystallinity.

  17. Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization.

    PubMed

    Li, Jihua; Wei, Xiaoyi; Wang, Qinghuang; Chen, Jiacui; Chang, Gang; Kong, Lingxue; Su, Junbo; Liu, Yuhuan

    2012-11-06

    Nanocellulose from sugarcane bagasse was isolated by high pressure homogenization in a homogeneous media. Pretreatment with an ionic liquid (1-butyl-3-methylimidazolium chloride ([Bmim]Cl)) was initially involved to dissolve the bagasse cellulose. Subsequently, the homogeneous solution was passed through a high pressure homogenizer without any clogging. The nanocellulose was obtained at 80 MPa for 30 cycles with recovery of 90% under the optimum refining condition. Nanocellulose had been characterized by Fourier transformed infrared spectra, X-ray diffraction, thermogravimetric analysis, rheological measurements and transmission electron microscopy. The results showed that nanocellulose was 10-20 nm in diameter, and presented lower thermal stability and crystallinity than the original cellulose. The developed nanocellulose would be a very versatile renewable material.

  18. Separation of lignin from corn stover hydrolysate with quantitative recovery of ionic liquid

    SciTech Connect

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

    2015-02-20

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent biorenewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. In this paper, we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. Finally, the isolated lignin is not only free from ionic liquid but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals.

  19. Enzymatic membrane reactor for full saccharification of ionic liquid-pretreated microcrystalline cellulose.

    PubMed

    Lozano, Pedro; Bernal, Berenice; Jara, Antonio G; Belleville, Marie-Pierre

    2014-01-01

    Ultrafiltration reactors based on polymeric or ceramic membranes were shown to be suitable catalytic systems for fast enzymatic saccharification of cellulose, allowing the full recovery and reuse of enzymes. By pre-treating cellulose with the IL 1-butyl-3-methylimidazolium chloride, the suitability of this substrate for enzymatic saccharification in a reactor based on polymeric ultrafiltration membranes was demonstrated, leading to 95% cellulose hydrolysis in 4h at 50°C. The filtration process gave a clear glucose solution (up to 113 mM) at constant permeate flow (24.7 L h(-1) m(-2)), allowing the enzyme to be reused for 9 operation cycles under semi-continuous operation, without any loss of enzyme activity. Under continuous operation mode and using ceramic ultrafiltration membranes at different residence times, the enzymatic reactor showed constant profiles in both the permeate flow rate and the glucose concentration, demonstrating the excellent suitability of the proposed approach for the saccharification of cellulose.

  20. Separation of lignin from corn stover hydrolysate with quantitative recovery of ionic liquid

    DOE PAGES

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; ...

    2015-02-20

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent biorenewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. In this paper, we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. Finally, themore » isolated lignin is not only free from ionic liquid but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals.« less

  1. The first molecular level monitoring of carbohydrate conversion to 5-hydroxymethylfurfural in ionic liquids. B2O3--an efficient dual-function metal-free promoter for environmentally benign applications.

    PubMed

    Khokhlova, Elena A; Kachala, Vadim V; Ananikov, Valentine P

    2012-04-01

    The mechanistic nature of the conversion of carbohydrates to the sustainable platform chemical 5-hydroxymethylfurfural (5-HMF) was revealed at the molecular level. A detailed study of the key sugar units involved in the biomass conversion process has shown that the simple dissolution of fructose in the ionic liquid 1-butyl-3-methylimidazolium chloride significantly changes the anomeric composition and favors the formation of the open fructoketose form. A special NMR approach was developed for the determination of molecular structures and monitoring of chemical reactions directly in ionic liquids. The transformation of glucose to 5-HMF has been followed in situ through the detection of intermediate species. A new environmentally benign, easily available, metal-free promoter with a dual functionality (B(2)O(3)) was developed for carbohydrate conversion to 5-HMF.

  2. Impact of regeneration process on the crystalline structure and enzymatic hydrolysis of cellulose obtained from ionic liquid.

    PubMed

    Cao, Xuefei; Peng, Xinwen; Sun, Shaoni; Zhong, Linxin; Wang, Sha; Lu, Fachuang; Sun, Runcang

    2014-10-13

    The present study investigated the impact of regeneration process on the crystalline structure and enzymatic hydrolysis behaviors of microcrystalline cellulose (MCC) regenerated from ionic liquid 1-butyl-3-methylimidazolium chloride. The crystalline structures of these regenerated samples were analyzed by X-ray diffraction. Results suggested that almost amorphous cellulose was obtained by regenerating MCC in acetone (DRC-a), while partial cellulose II structure could be found in these regenerated samples from water and ethanol. Additionally, the enzymatic hydrolysis behaviors of MCC and its regenerated samples were comparatively studied. Results showed that above 90% of cellulose could be converted into glucose within 4h for DRC-a and regenerated cellulose without drying (WRC-w) as compared to that of MCC (9.7%). Therefore, the regeneration process could significantly influence the crystallinity and digestibility of cellulose.

  3. Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production.

    PubMed

    Wahidin, Suzana; Idris, Ani; Shaleh, Sitti Raehanah Muhamad

    2016-04-01

    The wet biomass microalgae of Nannochloropsis sp. was converted to biodiesel using direct transesterification (DT) by microwave technique and ionic liquid (IL) as the green solvent. Three different ionic liquids; 1-butyl-3-metyhlimidazolium chloride ([BMIM][Cl], 1-ethyl-3-methylimmidazolium methyl sulphate [EMIM][MeSO4] and 1-butyl-3-methylimidazolium trifluoromethane sulfonate [BMIM][CF3SO3]) and organic solvents (hexane and methanol) were used as co-solvents under microwave irradiation and their performances in terms of percentage disruption, cell walls ruptured and biodiesel yields were compared at different reaction times (5, 10 and 15 min). [EMIM][MeSO4] showed highest percentage cell disruption (99.73%) and biodiesel yield (36.79% per dried biomass) after 15 min of simultaneous reaction. The results demonstrated that simultaneous extraction-transesterification using ILs and microwave irradiation is a potential alternative method for biodiesel production.

  4. Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid.

    PubMed

    Sidik, Dilaeleyana Abu Bakar; Ngadi, Norzita; Amin, Nor Aishah Saidina

    2013-05-01

    The production of lignin from empty fruit bunch (EFB) has been carried out using liquefaction method with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) ionic liquid (IL), in presence of sulfuric acid (H2SO4) as a catalyst. Response surface methodology (RSM) based on a factorial Central Composite Design (CCD) was employed to identify the optimum condition for lignin yield. The result indicated that the second order model was adequate for all the independent variables on the response with R(2)=0.8609. The optimum temperature, time, ionic liquid to EFB ratio, and catalyst concentration were 150.5 °C, 151 min, 3:1 wt/wt and 4.73 wt%, respectively for lignin yield=26.6%. The presence of lignin liquefied product was confirmed by UV-Vis and FTIR analysis. It was also demonstrated lignin extraction from lignocellulosic using recycled IL gave sufficient performance.

  5. Plasticizing effect of ionic liquid on cellulose acetate obtained by melt processing.

    PubMed

    Bendaoud, Amine; Chalamet, Yvan

    2014-08-08

    Cellulose acetate (CA) plasticized by 1-butyl-3-methylimidazolium chloride (BMIMCl) and with diethylphtalate (DEP) was obtained by melt processing at 150°C. The effect and the interaction of ionic liquid with the cellulose acetate and their influence on structural, thermo-mechanical, rheological and tensile properties of CA materials were investigated. Ionic liquid (BMIMCl) has shown a good plasticization and more efficient destruction of the crystalline structure of cellulose acetate than the DEP plasticized CA. BMIMCl interacts intensively with CA molecules due to the pronounced van der Waals interactions, hydrogen bonding and electrostatic nature of ionic liquid. The tensile test and the low Young's modulus for plasticized CA suggest a strong reduction of the interaction between the CA chains due to the presence of the ionic liquid.

  6. Separation of Lignin from Corn Stover Hydrolysate with Quantitative Recovery of Ionic Liquid

    PubMed Central

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

    2015-01-01

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent bio-renewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. Here we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. The isolated lignin is not only free from ionic liquid, but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals. PMID:25866701

  7. CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING IN CENTER, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING IN CENTER, CALCIUM CHLORIDE STORAGE BUILDING ON RIGHT WITH SA (SODA ASH) BUILDING IN RIGHT BACKGROUND. - Solvay Process Company, Calcium Chloride Plant, Between Willis & Milton Avenues, Solvay, Onondaga County, NY

  8. The Importance of Ion Size and Electrode Curvature on Electrical Double Layers in Ionic Liquids

    SciTech Connect

    Feng, Guang; Qiao, Rui; Huang, Jingsong; Dai, Sheng; Sumpter, Bobby G; Meunier, Vincent

    2010-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF(6)] (near the positive electrode) {approx} [BMIM][Cl] (near the negative electrode) {approx} [BMIM][PF(6)] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a 'Multiple Ion Layers with Overscreening' (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  9. The importance of ion size and electrode curvature on electrical double layers in ionic liquids

    SciTech Connect

    Feng, G.; Qiao, R.; Huang, J; Dai, S.; Sumpter, B. G.; Meunier, V.

    2011-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF{sub 6}], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF{sub 6}] (near the positive electrode) ≈ [BMIM][Cl] (near the negative electrode) ≈ [BMIM][PF{sub 6}] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a “Multiple Ion Layers with Overscreening” (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  10. Selective extraction of emerging contaminants from water samples by dispersive liquid-liquid microextraction using functionalized ionic liquids.

    PubMed

    Yao, Cong; Li, Tianhao; Twu, Pamela; Pitner, William R; Anderson, Jared L

    2011-03-25

    Functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion were used as extraction solvents in dispersive liquid-liquid microextraction (DLLME) for the extraction of 14 emerging contaminants from water samples. The extraction efficiencies and selectivities were compared to those of an in situ IL DLLME method which uses an in situ metathesis reaction to exchange 1-butyl-3-methylimidazolium chloride (BMIM-Cl) to 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf(2)). Compounds containing tertiary amine functionality were extracted with high selectivity and sensitivity by the 1-(6-amino-hexyl)-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (HNH(2)MPL-FAP) IL compared to other FAP-based ILs and the BMIM-NTf(2) IL. On the other hand, polar or acidic compounds without amine groups exhibited higher enrichment factors using the BMIM-NTf(2) IL. The detection limits for the studied analytes varied from 0.1 to 55.1 μg/L using the traditional IL DLLME method with the HNH(2)MPL-FAP IL as extraction solvent, and from 0.1 to 55.8 μg/L using in situ IL DLLME method with BMIM-Cl+LiNTf(2) as extraction solvent. A 93-fold decrease in the detection limit of caffeine was observed when using the HNH(2)MPL-FAP IL compared to that obtained using in situ IL DLLME method. Real water samples including tap water and creek water were analyzed with both IL DLLME methods and yielded recoveries ranging from 91% to 110%.

  11. Phosphonium chloride for thermal storage

    NASA Technical Reports Server (NTRS)

    Sutton, J. G.; Heimlich, P. F.; Tepper, E. H.

    1972-01-01

    Development of systems for storage of thermal energy is discussed. Application of phosphonium chloride for heat storage through reversible dissociation is described. Chemical, physical, and thermodynamic properties of phosphonium chloride are analyzed and dangers in using phosphonium chloride are explained.

  12. Chloride flux in phagocytes.

    PubMed

    Wang, Guoshun

    2016-09-01

    Phagocytes, such as neutrophils and macrophages, engulf microbes into phagosomes and launch chemical attacks to kill and degrade them. Such a critical innate immune function necessitates ion participation. Chloride, the most abundant anion in the human body, is an indispensable constituent of the myeloperoxidase (MPO)-H2 O2 -halide system that produces the potent microbicide hypochlorous acid (HOCl). It also serves as a balancing ion to set membrane potentials, optimize cytosolic and phagosomal pH, and regulate phagosomal enzymatic activities. Deficient supply of this anion to or defective attainment of this anion by phagocytes is linked to innate immune defects. However, how phagocytes acquire chloride from their residing environment especially when they are deployed to epithelium-lined lumens, and how chloride is intracellularly transported to phagosomes remain largely unknown. This review article will provide an overview of chloride protein carriers, potential mechanisms for phagocytic chloride preservation and acquisition, intracellular chloride supply to phagosomes for oxidant production, and methods to measure chloride levels in phagocytes and their phagosomes.

  13. CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING ON LEFT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING ON LEFT, CALCIUM CHLORIDE STORAGE BUILDING ON RIGHT OF CENTER WITH TOP OF SA (SODA ASH) BUILDING IN RIGHT BACKGROUND. - Solvay Process Company, Calcium Chloride Plant, Between Willis & Milton Avenues, Solvay, Onondaga County, NY

  14. Chloride in diet

    MedlinePlus

    Institute of Medicine. Food and Nutrition Board. Dietary Reference Intakes for Water, Potassium, Sodium, Chloride, and Sulfate. National Academy Press, Washington, DC: 2005. PMID: 101209392 www.ncbi.nlm.nih.gov/nlmcatalog/101209392 Mason JB. Vitamins, trace ...

  15. Hydrogen chloride test set

    NASA Technical Reports Server (NTRS)

    Workman, G. L.

    1976-01-01

    Detector uses tertiary amine, which makes reaction fairly specific for relatively small highly polarized hydrogen chloride molecule. Reaction is monitored by any microbalance capable of measuring extremely small mass differences in real time.

  16. Lithium Sulfuryl Chloride Battery.

    DTIC Science & Technology

    Primary batteries , Electrochemistry, Ionic current, Electrolytes, Cathodes(Electrolytic cell), Anodes(Electrolytic cell), Thionyl chloride ...Phosphorus compounds, Electrical conductivity, Calibration, Solutions(Mixtures), Electrical resistance, Performance tests, Solvents, Lithium compounds

  17. Mercuric chloride poisoning

    MedlinePlus

    ... Mercuric chloride is a very poisonous form of mercury. It is a type of mercury salt. There are different types of mercury poisonings . This article discusses poisoning from swallowing mercuric ...

  18. Strontium-89 Chloride

    MedlinePlus

    ... ever had bone marrow disease, blood disorders, or kidney disease.you should know that strontium-89 chloride may interfere with the normal menstrual cycle (period) in women and may stop sperm production ...

  19. Novel microemulsions: ionic liquid-in-ionic liquid.

    PubMed

    Cheng, Siqing; Zhang, Jianling; Zhang, Zhaofu; Han, Buxing

    2007-06-28

    The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.

  20. CHLORIDE RETENTION IN EXPERIMENTAL HYDRONEPHROSIS

    PubMed Central

    Keith, Norman M.; Pulford, D. Schuyler

    1923-01-01

    1. In acute experimental hydronephrosis chloride retention occurs as well as retention of water, urea, and phenolsulfonephthalein. 2. If both water and chlorides are retained there may be no appreciable rise in the plasma chloride content. 3. When chlorides are retained, but not water, the chloride content of the plasma rises strikingly. 4. After the removal of the ureteral obstruction in acute hydronephrosis all renal functions, water, urea, and chloride excretion, may be rapidly restored in equal degree, or the chlorides may be retained temporarily while there is free excretion of water and urea. 5. In chronic hydronephrosis adequate daily excretion of urea and chlorides may be maintained by a compensatory polyuria. 6. Chloride retention or an abnormal chloride excretion may occur in certain renal lesions when there is no change in the urea, phenolsulfonephthalein, or water excretion. PMID:19868720

  1. Cyclic Voltammetry of Silver Chloride in Lithium Chloride-Potassium Chloride Eutectic.

    DTIC Science & Technology

    TRY), Fused salts, Silver, Reduction(Chemistry), Dissolving, ChloridesSilver chloride, Cyclic voltammetry , *VoltammetryThe technique of cyclic ... voltammetry was employed to study the deposition and dissolution of silver metal at platinum wire electrodes in molten lithium chloride-potassium chloride

  2. Chloride removal from vitrification offgas

    SciTech Connect

    Slaathaug, E.J.

    1995-06-01

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations.

  3. Moxifloxacinium chloride monohydrate

    PubMed Central

    Qian, Jing-Jing; Gu, Jian-Ming; Shen, Jin; Hu, Xiu-Rong; Wu, Su-Xiang

    2011-01-01

    The title compound {systematic name: 7-[(1S,6S)-8-aza-2-azonia­bicyclo­[4.3.0]non-8-yl]-1-cyclo­propyl-6-fluoro-8-meth­oxy-4-oxo-1,4-dihydro­quinoline-3-carb­oxy­lic acid chloride monohydrate}, C21H25FN3O4 +·Cl−·H2O, crystallizes with two moxi­floxa­cinium cations, two chloride ions and two uncoordinated water mol­ecules in the unit cell. The crystal structure has a pseudo-inversion center except for the chloride ions. In both moxi­floxa­cinium cations, the quinoline rings are approximately planar, the maximum atomic deviations being 0.107 (3) and 0.118 (3) Å. The piperidine rings adopt a chair conformation while the pyrrolidine rings display a half-chair conformation. In the crystal, the carboxyl groups, the protonated piperidyl groups, the uncoordinated water mol­ecule and chloride anions participate in O—H⋯O, O—H⋯Cl and N—H⋯Cl hydrogen bonding; weak inter­molecular C—H⋯O and C—H⋯Cl hydrogen bonding is also present in the crystal structure. PMID:22058817

  4. A Quick Reference on Chloride.

    PubMed

    Bohn, Andrea A; de Morais, Helio Autran

    2017-03-01

    Chloride is an essential element, playing important roles in digestion, muscular activity, regulation of body fluids, and acid-base balance. As the most abundant anion in extracellular fluid, chloride plays a major role in maintaining electroneutrality. Chloride is intrinsically linked to sodium in maintaining osmolality and fluid balance and has an inverse relationship with bicarbonate in maintaining acid-base balance. It is likely because of these close ties that chloride does not get the individual attention it deserves; we can use these facts to simplify and interpret changes in serum chloride concentrations.

  5. Chloride channels as drug targets

    PubMed Central

    Verkman, Alan S.; Galietta, Luis J. V.

    2013-01-01

    Chloride channels represent a relatively under-explored target class for drug discovery as elucidation of their identity and physiological roles has lagged behind that of many other drug targets. Chloride channels are involved in a wide range of biological functions, including epithelial fluid secretion, cell-volume regulation, neuroexcitation, smooth-muscle contraction and acidification of intracellular organelles. Mutations in several chloride channels cause human diseases, including cystic fibrosis, macular degeneration, myotonia, kidney stones, renal salt wasting and hyperekplexia. Chloride-channel modulators have potential applications in the treatment of some of these disorders, as well as in secretory diarrhoeas, polycystic kidney disease, osteoporosis and hypertension. Modulators of GABAA (γ-aminobutyric acid A) receptor chloride channels are in clinical use and several small-molecule chloride-channel modulators are in preclinical development and clinical trials. Here, we discuss the broad opportunities that remain in chloride-channel-based drug discovery. PMID:19153558

  6. Oxomemazine hydro-chloride.

    PubMed

    Siddegowda, M S; Butcher, Ray J; Akkurt, Mehmet; Yathirajan, H S; Ramesh, A R

    2011-08-01

    IN THE TITLE COMPOUND [SYSTEMATIC NAME: 3-(5,5-dioxo-phen-othia-zin-10-yl)-N,N,2-trimethyl-propanaminium chloride], C(18)H(23)N(2)O(2)S(+)·Cl(-), the dihedral angle between the two outer aromatic rings of the phenothia-zine unit is 30.5 (2)°. In the crystal, the components are linked by N-H⋯Cl and C-H⋯Cl hydrogen bonds and C-H⋯π inter-actions.

  7. The Overriding Roles of Concentration and Hydrophobic Effect on Structure and Stability of Heme Protein Induced by Imidazolium-Based Ionic Liquids.

    PubMed

    Jha, Indrani; Kumar, Awanish; Venkatesu, Pannuru

    2015-07-02

    Spectroscopic and molecular docking investigations were carried out to characterize the effect of imidazolium-based ionic liquids (ILs) with varying chain length of the cation on the thermal stability as well as spectroscopic behavior of heme protein hemoglobin (Hb). The goal of this work is to investigate the role of concentration of ILs, the effect of alkyl chain length of the cation, and the related Hofmeister series on the structure of Hb. To achieve this goal, a series of ILs possessing same Cl(-) anion and a set of cation [Cnmim](+) with increasing chain length such as 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]), 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), 1-hexyl-3-methylimidazolium chloride ([Hmim][Cl]), and 1-decyl-3-methylimidazolium chloride ([Dmim][Cl]) were used in this study. It was observed that the stability of the protein was concentration dependent as well as the hydrophobic interactions between [Cnmim](+) of ILs, and the amino acid residues in the protein played a major role in protein unfolding. As a consequence, the destabilization tendency of the ILs toward the Hb increases with increasing chain length of the cation of ILs. Additionally, the cations of the ILs obeyed the Hofmeister series when arranged in the order of providing stability to Hb structure.

  8. Benzalkonium Chloride and Glaucoma

    PubMed Central

    Kaufman, Paul L.; Kiland, Julie A.

    2014-01-01

    Abstract Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology. PMID:24205938

  9. Benzalkonium chloride and glaucoma.

    PubMed

    Rasmussen, Carol A; Kaufman, Paul L; Kiland, Julie A

    2014-01-01

    Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology.

  10. Measurement of atmospheric vinyl chloride.

    PubMed

    Lande, S S

    1979-02-01

    Methods for atmospheric vinyl chloride measurement have been reviewed. The lowest detection limits and most specific measurement are achieved by scrubbing atmospheric samples with activated charcoal, desorbing the vinyl chloride, and assaying it by gas chromatography (GC). NIOSH currently recommends collecting samples using tubes packed with 150 mg of coconut shell charcoal, desorbing with carbon disulfide, and analyzing by GC equipped with flame-ionization detection (FID); the method is capable of detecting less than 1 ppm vinyl chloride and has an apparent recovery of abo the ppb level with no loss of accuracy or precision. Some field methods, such as infrared analysis and conductivity measurement, are capable of detecting 1 ppm or lower but are subject to interferences by other contaminants; th-y could be useful for evaluating sources of vinyl chloride leaks and for continuous monitoring. Permeation tubes are superior to gravimetric or volumetric methods for generating atmospheres of known vinyl chloride concentration.

  11. Antiviral effect of lithium chloride.

    PubMed

    Cernescu, C; Popescu, L; Constantinescu, S; Cernescu, S

    1988-01-01

    Studies in human embryo fibroblasts infected with measles or herpes simplex virus showed a reduction in virus yield when cultures were pretreated with 1-10 mM lithium chloride doses. Maximum effect was obtained by a 1 h treatment with 10 mM lithium chloride, preceding viral infection by 19-24 hours. A specific antiviral effect against measles virus was manifest immediately after culture pretreatment. Intermittent treatment with 10 mM lithium chloride of cultures persistently infected with measles or herpes virus obtained from human myeloid K-562 cell line shows a reduction in the extracellular virus yield. In the K-562/herpes virus system, the culture treatment with lithium chloride and acyclovir (10 microM) has an additive inhibitory effect on virus production. The paper is focused on the mechanism of lithium chloride antiviral action and the expediency of lithium therapy in SSPE (subacute sclerosing panencephalitis).

  12. Combined effects of raw materials and solvent systems on the preparation and properties of regenerated cellulose fibers.

    PubMed

    Chen, Jinghuan; Guan, Ying; Wang, Kun; Zhang, Xueming; Xu, Feng; Sun, Runcang

    2015-09-05

    To investigate the combined effects of materials and solvents on the preparation, structural and mechanical properties of regenerated cellulose fibers, four cellulosic materials (microcrystalline cellulose, cotton linter pulp, bamboo pulp and bleached softwood sulfite dissolving pulp) and six non-derivative solvents (NaOH/urea aqueous solution, N,N-dimethylacetamide/lithium chloride, N-methyl-morpholine-N-oxide, 1-butyl-3-methylimidazolium chloride, 1-allyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate) were used to prepare fibers with wet spinning method. The results showed that the dissolvability of solvent was the determining factor in cellulose dissolution, and the dissolving time was influenced by the raw materials' properties, such as molecular weight, exposed area and hemicellulose content. The crystallinity and elongation at break of the fibers were almost fixed and not affected by the materials and solvents. However, the tensile strength of the fibers was directly proportional to the molecular weight of the raw materials, and varied with the type of solvents through cellulose degradation.

  13. Molecular physics of electrical double layers in electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Feng, Guang

    tetraethylammonium tetrafluoroborate (TEABF4) in the aprotic solvent of acetonitrile (ACN). Firstly, the solvation of TEA+ and BF4 - ions is found to be much weaker than that of small inorganic ions. This characteristic accounts for the rich structure of EDLs near the electrodes. In particular, near charged electrodes, the ion distribution cannot be explained by the traditional EDL models. Secondly, the computed capacitances of EDLs agree well with those inferred from experimental measurements. Finally, we probed the dynamics of EDLs in organic electrolytes by analyzing the rotational dynamics of solvent and the self diffusion coefficients of ion/solvent. For the ILs, we performed the MD simulations of EDLs at the interface between an IL of 1-butyl-3-methylimidazolium nitrate ([BMIM][NO3]) and planar electrodes. The results revealed that the structure of the EDL is significantly affected by the liquid nature of the IL, the short-range ion--electrode and ion--ion interactions, and the charge delocalization of ions. We showed that the differential capacitance is a quantitative measure of the response of the EDL structure to a change of electrode surface charge density, and the concave-shaped capacitance--potential (C--V ) curve is in good agreement with that in the literature. To further acquire the theoretical understanding of EDLs in ILs, we investigated the effects of ion size and electrode curvature on the EDLs in ILs of 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]). The results indicated that the ion size considerably affects the ion distribution and orientational structure of EDLs, and the EDL capacitances follow a certain order of the ion size. It was also found that the EDL capacitance increases as the electrode curvature increases. Based on the insights gained from the EDL structure and capacitance, a "Multiple Ion Layers with Overscreening" (MILO) model was proposed for EDLs in ILs. The capacitance

  14. Lithium-Thionyl Chloride Battery.

    DTIC Science & Technology

    1981-04-01

    EEEElhIhEEEEEE 1111 1 - MI(CRO( fy Hl ff1Sf UIIIUN Ift I IA I~t Research and Development Technical Report DELET - TR - 78 - 0563 - F Cq LITHIUM - THIONYL CHLORIDE ...2b(1110) S. TYPE OF REPORT & PERIOD COVERED Lithium - Thionyl Chloride Battery -10/1/78 - 11/30/80 6. PNING ORG. REPORT NUMBER Z %A a.~as B.,OWRACT OR...block number) Inorganic Electrolyte battery, Thionyl Chloride , lithium , high rate D cell, high rate flat cylindrical cell, laser designator battery. C//i

  15. Studies Update Vinyl Chloride Hazards.

    ERIC Educational Resources Information Center

    Rawls, Rebecca

    1980-01-01

    Extensive study affirms that vinyl chloride is a potent animal carcinogen. Epidemiological studies show elevated rates of human cancers in association with extended contact with the compound. (Author/RE)

  16. Phase Behavior of N2O and CO2 in Room-Temperature Ionic Liquids [bmim][Tf2N], [bmim][BF4], [bmim][N(CN)2], [bmim][Ac], [eam][NO3], and [bmim][SCN

    NASA Astrophysics Data System (ADS)

    Shiflett, Mark B.; Niehaus, Anne Marie S.; Elliott, Beth A.; Yokozeki, A.

    2012-03-01

    The gas solubility of nitrous oxide (N2O) in room-temperature ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium thiocyanate, and ethylammonium nitrate has been measured at isothermal conditions from about (283 to 348)K using a gravimetric microbalance. The observed pressure-temperature composition ( PTx) data have been analyzed by use of a generic Redlich-Kwong equation-of-state (EOS) model, which has been successfully applied in our previous works. The interaction parameters have been determined using our measured vapor-liquid equilibrium data. Vapor-liquid-liquid equilibrium measurements have been made and validate EOS model predictions which suggest that these systems demonstrate Type III and Type V phase behavior, according to the classification of van Konynenburg and Scott. The global phase behavior of N2O has also been compared with both the measured data from this study and literature data for carbon dioxide (CO2) in each ionic liquid and Henry's law constants are compared at room temperature (298.15 K).

  17. Enzymatic Transesterification of Kraft Lignin with Long Acyl Chains in Ionic Liquids.

    PubMed

    Hulin, Lise; Husson, Eric; Bonnet, Jean-Pierre; Stevanovic, Tatjana; Sarazin, Catherine

    2015-09-09

    Valorization of lignin is essential for the economic viability of the biorefinery concept. For example, the enhancement of lignin hydrophobicity by chemical esterification is known to improve its miscibility in apolar polyolefin matrices, thereby helping the production of bio-based composites. To this end and due to its many reactive hydroxyl groups, lignin is a challenging macromolecular substrate for biocatalyzed esterification in non-conventional media. The present work describes for the first time the lipase-catalyzed transesterification of Kraft lignin in ionic liquids (ILs). Three lipases, three 1-butyl-3-methylimidazolium based ILs and ethyl oleate as long chain acyl donor were selected. Best results were obtained with a hydrophilic/hydrophobic binary IL system (1-butyl-3-methylimidazolium trifluoromethanesulfonate/1-butyl-3-methylimidazolium hexafluoro- phosphate, 1/1 v/v) and the immobilized lipase B from Candida antarctica (CALB) that afforded a promising transesterification yield (ca. 30%). Similar performances were achieved by using 1-butyl-3-methylimidazolium hexafluorophosphate as a coating agent for CALB rather than as a co-solvent in 1-butyl-3-methylimidazolium trifluoromethane-sulfonate thus limiting the use of hydrophobic IL. Structural characterization of lignin oleate was performed by spectroscopic studies (FTIR and ¹H-NMR). The synthesized lignin oleate exhibited interesting thermal and textural properties, different from those of the original Kraft lignin.

  18. Development of Bitter Taste Sensor Using Ionic-Liquid/Polymer Membranes

    NASA Astrophysics Data System (ADS)

    Akutagawa, Nobuyuki; Toida, Jinichi; Amano, Yoshihiko; Ikezaki, Hidekazu; Toko, Kiyoshi; Arikawa, Yukihiko

    A taste sensor is composed of several kinds of lipid/polymer membranes as transducers which convert taste information to electric signal. Thus, the role of membranes is very important to detect various taste components. In this paper, we developed novel membranes which specifically respond to quinine that is typical bitter substances. These membranes were composed of hydrophobic ionic liquid such as N, N, N-trimethyl-N-propylammonium bis(trifluoromethansulfonyl)imide, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butylpyridinium hexafluorophosphate, a plasticizer, 2-nitrophenyl octyl ether and a polymer, polyvinyl chloride. In addition to quinine, they also showed response to both several kinds of alkaloids such as caffeine and strychnine, and non-alkaloid such as phenylthiocarbamide. The order of these responses was equal to that of the tongue glossopharyngeal nerve of flog. Furthermore, there were the other alkaloids which response to these membranes. Especially in these alkaloids, they showed high response to denatonium benzoate and berberin chloride which have a strong bitter taste.

  19. Investigation of the interaction of pepsin with ionic liquids by using fluorescence spectroscopy.

    PubMed

    Fan, Yunchang; Zhang, Sheli; Wang, Qiang; Li, Junhai; Fan, Haotian; Shan, Dongkai

    2013-06-01

    The molecular mechanism of the interaction between pepsin and two typical ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) and 1-octyl-3-methylimidazolium chloride ([C8mim]Cl), was investigated with fluorescence spectroscopy, ultraviolet absorption, and circular dichroism spectroscopy at a pH value of 1.6. The results suggest that ILs could quench the intrinsic fluorescence of pepsin, probably via a dynamic quenching mechanism. The fluorescence quenching constants were determined by employing the classic Stern-Volmer equation. The constant values are very small, indicating that only a very weak interaction between ILs and pepsin exists. The Gibbs free-energy change, enthalpy change (ΔH), and entropy change (ΔS) during the interaction of pepsin and ILs were estimated. Positive values of ΔH and ΔS indicate that the interaction between ILs and pepsin is mainly driven by hydrophobic interaction. Synchronous and three-dimensional fluorescence spectra demonstrate that the addition of ILs (0-0.20 mol L(-1) for each IL) does not bring apparent changes to the microenvironments of tyrosine and tryptophan residues. Activity experiments show that the activity of pepsin is concentration dependent; higher concentrations of ILs (>0.22 mol L(-1) for [C8mim]Cl and >0.30 mol L(-1) for [C4mim]Cl) cause the remarkable reduction of enzyme activity. The presence of ILs also does not improve the thermal stability of pepsin.

  20. A study of the acid-catalyzed hydrolysis of cellulose dissolved in ionic liquids and the factors influencing the dehydration of glucose and the formation of humins.

    PubMed

    Dee, Sean J; Bell, Alexis T

    2011-08-22

    An investigation was carried out into the hydrolysis of cellulose dissolved in 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]) and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) catalyzed by mineral acids. Glucose, cellobiose, and 5-hydroxymethylfurfural (5-HMF) were observed as the primary reaction products. The initial rate of glucose formation was determined to be of first order in the concentrations of dissolved glucan and protons and of zero order in the concentration of water. The absence of a dependence on water concentration suggests that cleavage of the β-1,4-glycosidic linkages near chain ends is irreversible. The apparent activation energy for glucose formation is 96 kJ mol(-1). The absence of oligosaccharides longer than cellobiose suggests that cleavage of interior glycosidic bonds is reversible due to the slow diffusional separation of cleaved chains in the highly viscous glucan/ionic liquid solution. Progressive addition of water during the course of glucan hydrolysis inhibited the rate of glucose dehydration to 5-HMF and the formation of humins. The inhibition of glucose dehydration is attributed to stronger interaction of protons with water than the 2-OH atom of the pyranose ring of glucose, the critical step in the proposed mechanism for the formation of 5-HMF. The reduction in humin formation associated with water addition is ascribed to the lowered concentration of 5-HMF, since the formation of humins is suggested to proceed through the condensation polymerization of 5-HMF with glucose.

  1. An XAFS study of nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; G Cheek; K Pandya; W OGrady

    2011-12-31

    Nickel chloride was studied with cyclic voltammetry and X-ray absorption spectroscopy in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Acidic melts display metal stripping peaks which are not observed in the basic melt. EXAFS analysis shows that the nickel is tetrahedrally coordinated with chloride ions in the basic solution. In the acidic solution the nickel is coordinated by six chloride ions that are also associated with aluminum ions.

  2. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Cetylpyridinium chloride. 173.375 Section 173.375... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No....1666 of this chapter, at a concentration of 1.5 times that of cetylpyridinium chloride. (c)...

  3. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Dimethyldialkylammonium chloride. 173.400 Section... § 173.400 Dimethyldialkylammonium chloride. Dimethyldialkylammonium chloride may be safely used in food... subsequently reacted with methyl chloride to form the quaternary ammonium compounds consisting primarily...

  4. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Cetylpyridinium chloride. 173.375 Section 173.375... Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No. 123-93-5) may be safely used in food in... cetylpyridinium chloride. (c) The additive is used as follows: (1) As a fine mist spray of an ambient...

  5. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Cetylpyridinium chloride. 173.375 Section 173.375... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No....1666 of this chapter, at a concentration of 1.5 times that of cetylpyridinium chloride. (c)...

  6. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  7. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  8. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  9. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg. No. 7447-40-7) is a white... manufacturing practice. Potassium chloride may be used in infant formula in accordance with section 412(g)...

  10. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  11. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride, FeC13, CAS... (III) chloride hexahydrate, FeC13. 6H20, CAS Reg. No. 10025-77-1) is readily formed when...

  12. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride, FeC13, CAS Reg. No. 7705-08... hexahydrate, FeC13. 6H20, CAS Reg. No. 10025-77-1) is readily formed when ferric chloride is exposed...

  13. Regeneration of zinc chloride hydrocracking catalyst

    DOEpatents

    Zielke, Clyde W.

    1979-01-01

    Improved rate of recovery of zinc values from the solids which are carried over by the effluent vapors from the oxidative vapor phase regeneration of spent zinc chloride catalyst is achieved by treatment of the solids with both hydrogen chloride and calcium chloride to selectively and rapidly recover the zinc values as zinc chloride.

  14. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  15. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Cetylpyridinium chloride. 173.375 Section 173.375... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No....1666 of this chapter, at a concentration of 1.5 times that of cetylpyridinium chloride. (c)...

  16. 21 CFR 173.375 - Cetylpyridinium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Cetylpyridinium chloride. 173.375 Section 173.375... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No....1666 of this chapter, at a concentration of 1.5 times that of cetylpyridinium chloride. (c)...

  17. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34... chloride (vinyl chloride monomer). (a) Copper, aluminum, magnesium, mercury, silver, and their alloys shall... equipment that may come in contact with vinyl chloride liquid or vapor. (b) Valves, flanges, and...

  18. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34... chloride (vinyl chloride monomer). (a) Copper, aluminum, magnesium, mercury, silver, and their alloys shall... equipment that may come in contact with vinyl chloride liquid or vapor. (b) Valves, flanges, and...

  19. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34... chloride (vinyl chloride monomer). (a) Copper, aluminum, magnesium, mercury, silver, and their alloys shall... equipment that may come in contact with vinyl chloride liquid or vapor. (b) Valves, flanges, and...

  20. CHLORIDE WASHER PERFORMACE TESTING

    SciTech Connect

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  1. Lubiprostone: a chloride channel activator.

    PubMed

    Lacy, Brian E; Levy, L Campbell

    2007-04-01

    In January 2006 the Food and Drug Administration approved lubiprostone for the treatment of chronic constipation in men and women aged 18 and over. Lubiprostone is categorized as a prostone, a bicyclic fatty acid metabolite of prostaglandin E1. Lubiprostone activates a specific chloride channel (ClC-2) in the gastrointestinal (GI) tract to enhance intestinal fluid secretion, which increases GI transit and improves symptoms of constipation. This article reviews the role of chloride channels in the GI tract, describes the structure, function, and pharmacokinetics of lubiprostone, and discusses clinically important data on this new medication.

  2. Pretreatment of corn stover by combining ionic liquid dissolution with alkali extraction.

    PubMed

    Geng, Xinglian; Henderson, Wesley A

    2012-01-01

    Pretreatment plays an important role in the efficient enzymatic hydrolysis of biomass into fermentable sugars for biofuels. A highly effective pretreatment method is reported for corn stover which combines mild alkali-extraction followed by ionic liquid (IL) dissolution of the polysaccharides and regeneration (recovery of the polysaccharides as solids). Air-dried, knife-milled corn stover was soaked in 1% NaOH at a moderate condition (90°C, 1 h) and then thoroughly washed with hot deionized (DI) water. The alkali extraction solublized 75% of the lignin and 37% of the hemicellulose. The corn stover fibers became softer and smoother after the alkali extraction. Unextracted and extracted corn stover samples were separately dissolved in an IL, 1-butyl-3-methylimidazolium chloride (C(4) mimCl), at 130°C for 2 h and then regenerated with DI water. The IL dissolution process did not significantly change the chemical composition of the materials, but did alter their structural features. Untreated and treated corn stover samples were hydrolyzed with commercial enzyme preparations including cellulases and hemicellulases at 50°C. The glucose yield from the corn stover sample that was both alkali-extracted and IL-dissolved was 96% in 5 h of hydrolysis. This is a highly effective methodology for minimizing the enzymatic loading for biomass hydrolysis and/or maximizing the conversion of biomass polysaccharides into sugars.

  3. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules

    PubMed Central

    Su, Jielong; Raghuwanshi, Vikram S.; Raverty, Warwick; Garvey, Christopher J.; Holden, Peter J.; Gillon, Marie; Holt, Stephen A.; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-01-01

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR. PMID:27796332

  4. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules.

    PubMed

    Su, Jielong; Raghuwanshi, Vikram S; Raverty, Warwick; Garvey, Christopher J; Holden, Peter J; Gillon, Marie; Holt, Stephen A; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-10-31

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR.

  5. Morphology- and facet-controlled synthesis of CuO micro/nanomaterials and analysis of their lithium ion storage properties

    NASA Astrophysics Data System (ADS)

    Liu, Xiaodi; Liu, Guangyin; Wang, Lijuan; Li, Yinping; Ma, Yupei; Ma, Jianmin

    2016-04-01

    Hierarchical CuO architectures and monodisperse CuO nanoplates are synthesized via a hydrothermal method with the assistance of ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The products are characterized by XRD, SEM, TEM, HRTEM, BET, and XPS, and the results indicate that the CuO architectures are composed of nanosheets with exposed (001) facets and the CuO nanoplates are single crystals enclosed by (200) facets. More specially, it is found that [Bmim]Cl serves as an effective template for the synthesis of CuO nanoplates by adsorbing on the (200) planes of monoclinic CuO. When evaluated as anode materials for lithium-ion batteries, CuO architectures possess higher discharge capacity, better cycling stability, and better rate capability than CuO nanoplates. The initial discharge capacity of CuO architectures is 1096 mAh g-1 at a rate of 0.5 C, whereas CuO nanoplates exhibit a lower capacity of 878.4 mAh g-1. Moreover, after 50 cycles, CuO architectures and CuO nanoplates can deliver discharge capacities of 465.6 and 281.6 mAh g-1, respectively.

  6. Comparative investigation of underpotential deposition of Ag from aqueous and ionic electrolytes: An electrochemical and in situ STM study.

    PubMed

    Borissov, D; Aravinda, C L; Freyland, W

    2005-06-16

    Underpotential deposition (UPD) of Ag on Au(111) has been studied with two different electrolytes: aqueous 0.1 M H2SO4 solution in comparison with the ionic liquid 1-butyl-3-methylimidazolium chloride BMICl + AlCl3. Of particular interest is the distinct behavior of 2D phase formation at both interfaces, which has been investigated by cyclic and linear sweep voltammetry in combination with in situ electrochemical scanning tunneling microscopy (STM). It is found that one monolayer (ML) of Ag is formed in the UPD region in both electrolytes. In aqueous solution, atomically resolved STM images at 500 mV versus Ag/Ag+ show a (3 x 3) adlayer of Ag, whereas after sweeping the potential just before the commencement of the bulk Ag deposition, a transition from expanded (3 x 3) to pseudomorphic ML of Ag on Au(111) occurs. In BMICl-AlCl3, the first UPD process of Ag exhibits two peaks at 410 and 230 mV indicating that two distinct processes on the surface take place. For the first time, STM images with atomic resolution reveal a transition from an inhomogeneous to an ordered phase with a (square root of 3 x square root of 3)R30 degrees structure and an adsorption of AlCl4- anions having a superlattice of (1.65 x square root of 3)R30 degrees preceding the deposition of Ag.

  7. Esterification of potato starch by a biocatalysed reaction in an ionic liquid.

    PubMed

    Zarski, Arkadiusz; Ptak, Sylwia; Siemion, Przemyslaw; Kapusniak, Janusz

    2016-02-10

    In this study, potato starch was esterified with oleic acid, using 1-butyl-3-methylimidazolium chloride as a reaction medium and an immobilised lipase from Thermomyces lanuginosus as a catalyst. The degree of substitution (DS) of the products was determined by the volumetric method; and the best esterified product (with the highest DS) was determined by an elemental analysis. The effect of the reaction parameters on the DS, such as the time and the temperature, were also studied. The product with the highest DS (0.22) was found in the reaction carried out at 60 °C for 4h. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses confirmed the esterification of the potato starch. Furthermore, the results of X-ray diffraction (XRD) and a scanning electron microscopy (SEM) revealed that the crystallinity and the morphology of the native potato starch was slightly changed during its partial gelatinisation in the ionic liquid, and was completely destroyed as a result of the formation of the esters. The thermal stability of the starch oleate decreased, when compared to the unmodified starch, as was indicated by a thermal gravimetric analysis (TGA).

  8. All-cellulose and all-wood composites by partial dissolution of cotton fabric and wood in ionic liquid.

    PubMed

    Shibata, Mitsuhiro; Teramoto, Naozumi; Nakamura, Taro; Saitoh, Yoshinobu

    2013-11-06

    After cotton fabric (CF) and hinoki lumber (HL) were dipped in 1-butyl-3-methylimidazolium chloride (BMIMCl) at 100 °C, the BMIMCl-impregnated CF and HL were hot-pressed to give CF-BMIMCl and HL-BMIMCl composites, respectively. The BMIMCl contained in the composites was removed by Soxhlet extraction, and subsequently annealed to produce all-cellulose and all-wood composites (CF-A and HL-A). The SEM analyses revealed that cellulose fibers combined together for CF-A and the surface of HL-A became smooth, respectively. The XRD measurements indicated that the crystallinity index of cellulose component decreased by the hot press, increased by the extraction, and further increased by the annealing for both the composites. The tensile modulus of CF-A increased with increasing pressure of hot-press. Although tensile strength of HL-A was a little lower than that of original HL, tensile modulus of the former was much higher than that of the latter.

  9. Ionic liquid biodegradability depends on specific wastewater microbial consortia.

    PubMed

    Docherty, Kathryn M; Aiello, Steven W; Buehler, Barbara K; Jones, Stuart E; Szymczyna, Blair R; Walker, Katherine A

    2015-10-01

    Complete biodegradation of a newly-synthesized chemical in a wastewater treatment plant (WWTP) eliminates the potential for novel environmental pollutants. However, differences within- and between-WWTP microbial communities may alter expectations for biodegradation. WWTP communities can also serve as a source of unique consortia that, when enriched, can metabolize chemicals that tend to resist degradation, but are otherwise promising green alternatives. We tested the biodegradability of three ionic liquids (ILs): 1-octyl-3-methylpyridinium bromide (OMP), 1-butyl-3-methylpyridinium bromide (BMP) and 1-butyl-3-methylimidazolium chloride (BMIM). We performed tests using communities from two WWTPs at three time points. Site-specific and temporal variation both influenced community composition, which impacted the success of OMP biodegradability. Neither BMP nor BMIM degraded in any test, suggesting that these ILs are unlikely to be removed by traditional treatment. Following standard biodegradation assays, we enriched for three consortia that were capable of quickly degrading OMP, BMP and BMIM. Our results indicate WWTPs are not functionally redundant with regard to biodegradation of specific ionic liquids. However, consortia can be enriched to degrade chemicals that fail biodegradability assays. This information can be used to prepare pre-treatment procedures and prevent environmental release of novel pollutants.

  10. Self-healing guar gum and guar gum-multiwalled carbon nanotubes nanocomposite gels prepared in an ionic liquid.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2013-10-15

    Guar gum is a galactomannan extracted from the seed of the leguminous shrub Cyamopsis tetragonoloba. It was found to form a soft viscoelastic gel in 1-butyl-3-methylimidazolium chloride, an ionic liquid at an optimized concentration of 10%w/v. A nanocomposite gel of the gum with enhanced strength could be prepared with 0.2%w/v of multiwalled carbon nanotubes (MWCNTs) in the ionic liquid. When the gels thus prepared were subjected to surface fractures or bisected completely, they found to self-heal at room temperature without any external interventions. The self-healing process could be repeated several times. These viscoelastic gel systems showed thixotropic nature and recovery of the storage modulus with time for several cycles was observed upon rheological investigations. The interaction took place between ionic liquid, guar gum and MWCNT was studied by SEM, TEM, FT-IR, powder XRD and rheometry. The results suggested that, upon standing at room temperature development of electrostatic interactions and the van der Waals interactions among the ionic liquid molecules facilitated the formation of reversible noncovalent bonds and eventually activated the self-healing in the gel systems through appropriate chain entanglements.

  11. Ligandless ultrasonic-assisted and ionic liquid-based dispersive liquid-liquid microextraction of copper, nickel and lead in different food samples.

    PubMed

    Jalbani, N; Soylak, M

    2015-01-15

    A simple and rapid ultrasonic assisted-ionic liquid based-liquid-liquid microextraction (UA-IL-DLLME) method has been developed for the enrichment and separation of Cu(II), Ni(II) and Pb(II). A two level factorial design was used to determine the effect of key factors such as pH, volume of ionic liquid (IL), carbon tetra chloride (CCl4) and sonication time (St). 1-Butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) and CCl4 were used as an extractant and dispersant solvent, respectively. The accuracy of the proposed method was evaluated by analysing of SRM Apple Leaves 1515 certified reference material. The limits of detections (LODs) were 0.17 μg/L, 0.49 μg/L and 0.95 μg/L for Cu, Ni and Pb, respectively. The enrichment factor (EF) was 100. The method has been successfully applied for the analysis of the content of Cu, Ni and Pb in spice, vegetable and fruit samples by flame atomic absorption spectrometry (FAAS).

  12. Extraction of testosterone and epitestosterone in human urine using aqueous two-phase systems of ionic liquid and salt.

    PubMed

    He, Chiyang; Li, Shehong; Liu, Huwei; Li, Kean; Liu, Feng

    2005-08-05

    Based on aqueous two-phase systems (ATPS) consisting of 1-butyl-3-methylimidazolium chloride, a hydrophilic ionic liquid (IL), and K2HPO4, a new and simple extraction technique, coupled with a reversed-phase high performance liquid chromatography (RP-HPLC), was developed for the simultaneous concentration and analysis of testosterone (T) and epitestosterone (ET) in human urine. Under the optimal conditions, the extraction efficiencies for both analytes were 80-90% in a one-step extraction. The method required only 3.0 mL of urine and a single hydrolysis/deproteinization/extraction step followed by direct injection of the IL-rich upper phase into HPLC system for analysis. The method has been satisfactorily applied to the analysis of T and ET in human urine with detection limits of 1 ng/mL and linear ranges of 10-500 ng/mL for both compounds. Compared with conventional liquid-liquid extraction or solid phase extraction, this new method is much "greener" due to no use of volatile organic solvent and low consumption of IL. The proposed extraction technique opens up new possibilities in the separation of other drugs.

  13. [Separation and determination of optical isomers of phenylephrine by chiral ligand exchange capillary elcctrophoresis coupling with the promoting effect of ionic liquid].

    PubMed

    Yang, Simei; Zhang, Jiayao; Li, Fei; Hu, Xufang; Cao, Qiue

    2016-01-01

    A method for the separation and determination of optical isomers of phenylephrine was developed based on the promoting effect of non-chiral ionic liquid on chiral ligand-exchange capillary electrophoresis after the electrophoretic parameters were optimized systematically. R-phenylephrine and S-phenylephrine can be separated and determined effectively in 20 mmol/L Tris-H3PO4 buffer solution (pH 5.4) composed of 4.0 mmol/L Cu(II), 8.0 mmol/L L-proline (L-Pro) and 15 mmol/L 1-butyl-3-methylimidazolium chloride ([BMIM] Cl) with the applied voltage of 20 kV, capillary temperature of 25 °C , detection wavelength of 254 nm, and injection of 5 s at 3,447 Pa. The resolution of R- and S-phenylephrines was 1. 42. The linear ranges for the determination of R-phenylephrine and S-phenylephrine were 12. 5 - 150 mg/L and 15. 0-150 mg/L, respectively. The method has been satisfactorily used for the determination of R-phenylephrine and S-phenylephrine in the spiked blood and urine samples. The spiked recoveries in the urine sample were in the range of 93. 7% -108. 2% with the RSDs lower than 3. 18% (n= 3) , and the spiked recoveries in the blood sample were in the range of 91. 4% and 113. 1% with the RSDs lower than 4. 82% (n =3).

  14. Catalysis of rice straw hydrolysis by the combination of immobilized cellulase from Aspergillus niger on β-cyclodextrin-Fe3O4 nanoparticles and ionic liquid.

    PubMed

    Huang, Po-Jung; Chang, Ken-Lin; Hsieh, Jung-Feng; Chen, Shui-Tein

    2015-01-01

    Cellulase from Aspergillus niger was immobilized onto β-cyclodextrin-conjugated magnetic particles by silanization and reductive amidation. The immobilized cellulase gained supermagnetism due to the magnetic nanoparticles. Ninety percent of cellulase was immobilized, but the activity of immobilized cellulase decreased by 10%. In this study, ionic liquid (1-butyl-3-methylimidazolium chloride) was introduced into the hydrolytic process because the original reaction was a solid-solid reaction. The activity of immobilized cellulase was improved from 54.87 to 59.11 U g immobilized cellulase(-1) at an ionic liquid concentration of 200 mM. Using immobilized cellulase and ionic liquid in the hydrolysis of rice straw, the initial reaction rate was increased from 1.629 to 2.739 g h(-1) L(-1). One of the advantages of immobilized cellulase is high reusability--it was usable for a total of 16 times in this study. Compared with free cellulase, magnetized cellulase can be recycled by magnetic field and the activity of immobilized cellulase was shown to remain at 85% of free cellulase without denaturation under a high concentration of glucose (15 g L(-1)). Therefore, immobilized cellulase can hydrolyze rice straw continuously compared with free cellulase. The amount of harvested glucose can be up to twentyfold higher than that from the hydrolysis by free cellulase.

  15. Enhancement in ionic liquid tolerance of cellulase immobilized on PEGylated graphene oxide nanosheets: Application in saccharification of lignocellulose.

    PubMed

    Xu, Jiaxing; Sheng, Zhenhuan; Wang, Xinfeng; Liu, Xiaoyan; Xia, Jun; Xiong, Peng; He, Bingfang

    2016-01-01

    The objective of the present work was to improve ionic liquid (IL) tolerance of cellulase based on the exploration of functional nanoscale carriers for potential application in lignocellulosic biorefinery. PEGylated graphene oxide (GO) composite was successfully fabricated by chemical binding of 4-arm-PEG-NH2 and GO and applied to the immobilization of cellulase. The PEGylated GO-Cellulase retained 61% of the initial activity in 25% (w/v) 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) while free cellulase only retained 2%. The IL stability was enhanced more than 30 times. The relatively minor change in Km value (from 2.7 to 3.2mgmL(-1)) after the immobilization suggested that PEGylated GO-Cellulase was capable of closely mimicking the performance of free enzyme. After treating rice straw with [Bmim][Cl] and dilution to a final IL concentration of 15% (w/v), the slurry was directly hydrolyzed using PEGylated GO-Cellulase without IL removing and a high hydrolysis rate of 87% was achieved.

  16. Collagen/cellulose hydrogel beads reconstituted from ionic liquid solution for Cu(II) adsorption.

    PubMed

    Wang, Jilei; Wei, Ligang; Ma, Yingchong; Li, Kunlan; Li, Minghui; Yu, Yachen; Wang, Lei; Qiu, Huihui

    2013-10-15

    A novel adsorbent, biodegradable collagen/cellulose hydrogel beads (CCHBs), was prepared by reconstitution from a 1-butyl, 3-methylimidazolium chloride ([C4mim]Cl) solution. The adsorption properties of the CCHBs for Cu(II) ion removal from aqueous solutions were investigated and compared with those of cellulose hydrogel beads (CHBs). The CCHBs have a three-dimensional macroporous structure whose amino groups are believed to be the main active binding sites of Cu(II) ions. The equilibrium adsorption capacity (qe) of the CCHBs is greatly influenced by the collagen/cellulose mass ratio, and steeply increases until the collagen/cellulose mass ratio exceeds 2/1. The maximum adsorption is obtained at pH 6. The qe of Cu(II) ions increases with increased initial concentration of the solution. Based on Langmuir isotherms, the maximum adsorption capacity (qm) of CCHB3 (collagen/cellulose mass ratio of 3/1) is 1.06 mmol/g. The CCHBs maintain good adsorption properties after the fourth cycle of adsorption-desorption.

  17. Topochemical pretreatment of wood biomass to enhance enzymatic hydrolysis of polysaccharides to sugars.

    PubMed

    Mou, Hong-Yan; Orblin, Elina; Kruus, Kristiina; Fardim, Pedro

    2013-08-01

    The surface chemistry of milled birch and pine wood pretreated by ionic liquid, hydrothermal and hydrotropic methods, followed by enzymatic hydrolysis was studied in this work. Surface coverage by lignin was measured by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to describe the surface chemical composition after pretreatment in detail, and the morphology after pretreatment was investigated by FE-SEM. Ionic liquid (1-ethyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium chloride) pretreatment at room temperature made the samples swell but did not dissolve the wood. Comparing the surface coverage by lignin, both in the case of birch and pine wood, hydrotropic worked best to remove the lignin hampering enzymatic hydrolysis. ToF-SIMS supported this finding, and showed that in birch, the carbohydrates were degraded more than in pine after hydrotropic pretreatment. The glucose yield of birch was improved by hydrotropic pretreatment from 5.1% to 83.9%, more significantly than in case of pine.

  18. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules

    NASA Astrophysics Data System (ADS)

    Su, Jielong; Raghuwanshi, Vikram S.; Raverty, Warwick; Garvey, Christopher J.; Holden, Peter J.; Gillon, Marie; Holt, Stephen A.; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-10-01

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR.

  19. Synthesis, micellization behavior and alcohol induced amphipathic cellulose film of cellulose-based amphiphilic surfactant

    NASA Astrophysics Data System (ADS)

    Yang, Fang; Liu, Ya-nan; Yu, Jian-ling; Li, Hai-peng; Li, Gang

    2015-08-01

    This paper presented a novel preparation method of the cellulose-based amphiphilic surfactant, and the surfactant was used to prepare amphipathic cellulose membrane. The native cotton cellulose was tailored to cellulose segments in ionic liquid 1-butyl-3-methylimidazolium chloride. Then, the hydrophobic and hydrophilic modification of cellulose segments were carried out by esterification and graft polymerization of the ɛ-caprolactone (ɛ-CL) monomer onto the hydroxyl group of cellulose as well as sulphonation with sulfamic acid. The amphipathic cellulose membrane was made by cellulose-based amphiphilic surfactant cross-linking with glutaraldehyde. The molecular structure of amphipathic cellulose surfactant was confirmed by FT-IR, and its surface active properties were investigated by Wilhelmy plate method and Steady-state fluorescence probe method, respectively. Experimental results showed that cellulose-based amphiphilic surfactant caused low interfacial tension of 48.62 mN/m and its critical micelle concentration (cmc) value was 0.65 wt% when the grafting ratio of cellulose-g-PCL (poly-caprolactone) was 25.40%. The contact angle between a droplet of water and the surface of membrane was 90.84o, and the surface free energy of the alcohol induced cellulose membrane was 15.7 mJ/m2. This study may help increase using natural and biodegradable surface-activity materials with improved properties as surfactants.

  20. The solvation structures of cellulose microfibrils in ionic liquids

    SciTech Connect

    Mostofian, Barmak; Smith, Jeremy C; Cheng, Xiaolin

    2011-01-01

    The use of ionic liquids for non-derivatized cellulose dissolution promises an alternative method for the thermochemical pretreatment of biomass that may be more efficient and environmentally acceptable than more conventional techniques in aqueous solution. Here, we performed equilibrium MD simulations of a cellulose microfibril in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) and compared the solute structure and the solute-solvent interactions at the interface with those from corresponding simulations in water. The results indicate a higher occurrence of solvent-exposed orientations of cellulose surface hydroxymethyl groups in BmimCl than in water. Moreover, spatial and radial distribution functions indicate that hydrophilic surfaces are a preferred site of interaction between cellulose and the ionic liquid. In particular, hydroxymethyl groups on the hydrophilic fiber surface adopt a different conformation from their counterparts oriented towards the fiber s core. Furthermore, the glucose units with these solvent-oriented hydroxymethyls are surrounded by the heterocyclic organic cation in a preferred parallel orientation, suggesting a direct and distinct interaction scheme between cellulose and BmimCl.

  1. Ionic liquid tunes microemulsion curvature.

    PubMed

    Liu, Liping; Bauduin, Pierre; Zemb, Thomas; Eastoe, Julian; Hao, Jingcheng

    2009-02-17

    Middle-phase microemulsions formed from cationic dioctadecyldimethylammonium chloride (DODMAC), anionic sodium dodecylsulfate (SDS), n-butanol, and n-heptane were studied. An ionic liquid (IL), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), was employed as the electrolyte in the aqueous media instead of inorganic salts usually used in microemulsion formulation. Studies have been carried out as a function of the concentrations of [bmim][BF4], n-butanol, total surfactant (cDODMAC+SDS), and temperature on the phase behavior and the ultralow interfacial tensions in which the anionic component is present in excess in the catanionic film. Ultralow interfacial tension measurements confirmed the formation of middle-phase microemulsions and the necessary conditions for stabilizing middle-phase microemulsions. Electrical conductivity, small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS) experiments were also performed, indicating that the typical heptane domain size has an average radius of 360 A and the ionic liquid induces softening of the charged catanionic film. Most interestingly, the IL concentration (cIL) is shown to act as an effective interfacial curvature-control parameter, representing a new approach to tuning the formulation of microemulsions and emulsions. The results expand the potential uses of ILs but also point to the design of new ILs that may achieve superefficient control over interfacial and self-assembly systems.

  2. Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies.

    PubMed

    Falcone, R Dario; Baruah, Bharat; Gaidamauskas, Ernestas; Rithner, Christopher D; Correa, N Mariano; Silber, Juana J; Crans, Debbie C; Levinger, Nancy E

    2011-06-06

    Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room-temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. (1)H, (11)B, and (19)F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X-100 (TX-100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim](+) and [BF(4)](-) in the presence of TX-100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim](+) and [BF(4)](-) and migration of Cl(-) within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures.

  3. Catalysis of Rice Straw Hydrolysis by the Combination of Immobilized Cellulase from Aspergillus niger on β-Cyclodextrin-Fe3O4 Nanoparticles and Ionic Liquid

    PubMed Central

    Huang, Po-Jung; Chang, Ken-Lin; Chen, Shui-Tein

    2015-01-01

    Cellulase from Aspergillus niger was immobilized onto β-cyclodextrin-conjugated magnetic particles by silanization and reductive amidation. The immobilized cellulase gained supermagnetism due to the magnetic nanoparticles. Ninety percent of cellulase was immobilized, but the activity of immobilized cellulase decreased by 10%. In this study, ionic liquid (1-butyl-3-methylimidazolium chloride) was introduced into the hydrolytic process because the original reaction was a solid-solid reaction. The activity of immobilized cellulase was improved from 54.87 to 59.11 U g immobilized cellulase−1 at an ionic liquid concentration of 200 mM. Using immobilized cellulase and ionic liquid in the hydrolysis of rice straw, the initial reaction rate was increased from 1.629 to 2.739 g h−1 L−1. One of the advantages of immobilized cellulase is high reusability—it was usable for a total of 16 times in this study. Compared with free cellulase, magnetized cellulase can be recycled by magnetic field and the activity of immobilized cellulase was shown to remain at 85% of free cellulase without denaturation under a high concentration of glucose (15 g L−1). Therefore, immobilized cellulase can hydrolyze rice straw continuously compared with free cellulase. The amount of harvested glucose can be up to twentyfold higher than that from the hydrolysis by free cellulase. PMID:25874210

  4. Significantly improving enzymatic saccharification of high crystallinity index's corn stover by combining ionic liquid [Bmim]Cl-HCl-water media with dilute NaOH pretreatment.

    PubMed

    He, Yu-Cai; Liu, Feng; Gong, Lei; Zhu, Zheng-Zhong; Ding, Yun; Wang, Cheng; Xue, Yu-Feng; Rui, Huan; Tao, Zhi-Cheng; Zhang, Dan-Ping; Ma, Cui-Luan

    2015-01-01

    In this study, a pretreatment by combining acidified aqueous ionic liquid 1-butyl-3-methylimidazolium chloride (IL [Bmim]Cl) solution with dilute NaOH extraction was employed to pretreat high crystallinity index (CrI) of corn stover before its enzymatic saccharification. After NaOH extraction, [Bmim]Cl-HCl-water (78.8:1.2:20, w/w/w) media was used for further pretreatment at 130 °C for 30 min. After being enzymatically hydrolyzed for 48 h, corn stover pretreated could be biotransformed into reducing sugars in the yield of 95.1%. Furthermore, SEM, XRD and FTIR analyses of untreated and pretreated corn stovers were examined. It was found that the intact structure was disrupted by combination pretreatment and resulted in a porous and amorphous regenerated cellulosic material that greatly improved enzymatic hydrolysis. Finally, the recovered hydrolyzates obtained from the enzymatic hydrolysis of pretreated corn stovers could be fermented into ethanol efficiently. In conclusion, the combination pretreatment shows high potential application in future.

  5. Green synthesis of polymer monoliths incorporated with carbon nanotubes in room temperature ionic liquid and deep eutectic solvents.

    PubMed

    Zhang, Li-Shun; Gao, Shu-Ping; Huang, Yan-Ping; Liu, Zhao-Sheng

    2016-07-01

    In this work, an efficient method to prepare polymer monoliths with incorporated carbon nanotubes in a mixture of room temperature ionic liquid and deep eutectic solvents was developed. With assistance of the binary green solvent, 1-butyl-3-methylimidazolium tetrafluoroborate and choline chloride/ethylene glycol, single-walled carbon nanotubes were dispersed successfully in pre-polymerization mixture without need of oxidative cutting of carbon nanotubes, which may allow depletion of the emission of volatile organic compounds into environment. The novel single-walled carbon nanotubes monolith was evaluated by capillary electrochromatography. Compared with the monolith made without single-walled carbon nanotubes, the monolith with the incorporation of single-walled carbon nanotubes exhibited high column efficiency (251,000plates/m) in the chromatographic separation. The morphology of the monolith can be tuned by the composition of mixture of ionic liquids and deep eutectic solvents to afford good column permeability and excellent separation ability for small molecules of alkyl phenones and alkyl benzenes. The results demonstrated that the method is a green strategy for the fabrication of multifunctional polymer monoliths.

  6. Utilization of an ionic liquid in situ preconcentration method for the determination of the 15 + 1 European Union polycyclic aromatic hydrocarbons in drinking water and fruit-tea infusions.

    PubMed

    Germán-Hernández, Mónica; Crespo-Llabrés, Pilar; Pino, Verónica; Ayala, Juan H; Afonso, Ana M

    2013-08-01

    An ionic liquid (IL) in situ preconcentration method was optimized and applied to the monitoring of the 15 + 1 European Union polycyclic aromatic hydrocarbons in water and fruit-tea infusions. The optimized method utilizes 10 mL of water (or infusion) containing 38 μL of the IL 1-butyl-3-methylimidazolium chloride and a content of 36.1 g/L NaCl, which are mixed with Li-NTf2 (340 μL, 0.2 g/mL), followed by vortex (4 min) and centrifugation (5 min). The obtained microdroplet containing hydrocarbons is diluted with acetonitrile and injected into an HPLC with UV/Vis and fluorescence detection. The method presented average enrichment factors of 127 for water (tap water and bottled water) and 27 for two fruit-tea infusions; with average relative recoveries of 86.7 and 106% for water and fruit-tea infusions, respectively. The method was sensitive, with detection limits ranging from 0.001 to 0.050 ng/mL in water, and from 0.010 to 0.600 ng/mL in fruit-tea infusions, for the fluorescent hydrocarbons. Real extraction efficiencies ranged from 12.7 to 58.7% for water, and from 20.2 to 117% for the infusions. The method was also fast (~12 min) and free of organic solvents in the extraction step.

  7. Hydrolysis of microcrystalline cellulose using functionalized Bronsted acidic ionic liquids - A comparative study.

    PubMed

    Parveen, Firdaus; Patra, Tanmoy; Upadhyayula, Sreedevi

    2016-01-01

    Cellulose conversion to platform chemicals is required to meet the demands of increasing population and modernization of the world. Hydrolysis of microcrystalline cellulose was studied with SO3H, COOH and OH functionalized imidazole based ionic liquid using 1-butyl-3-methylimidazolium chloride [BMIM]Cl as a solvent. The influence of temperature, time, acidity of ionic liquids and catalyst loading was studied on hydrolysis reaction. The maximum %TRS yield 85%, was obtained at 100°C and 90min with 0.2g of SO3H functionalized ionic liquid. UV-vis spectroscopy using 4-nitro aniline as an indicator was performed to find out the Hammett function of ionic liquid and acidity trends are as follows: SO3H>COOH>OH. Density functional theory (DFT) calculations were performed to optimize the ionic liquid and their conjugate bases at B3LYP 6-311G++ (d, p) level using Gaussian 09 program. Theoretical findings are in agreement with the experimental results.

  8. SO₃H-functionalized acidic ionic liquids as catalysts for the hydrolysis of cellulose.

    PubMed

    Liu, Yuanyuan; Xiao, Wenwen; Xia, Shuqian; Ma, Peisheng

    2013-01-30

    The conversion of cellulose into valuable chemicals to deal with the depletion of fossil fuel has got much attention. Completing the hydrolysis of cellulose under mild conditions is the key step. In this study, six kinds of SO(3)H-functionalized acidic ionic liquids were used as acid catalyst to promote the hydrolysis of cellulose in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl). All of them were efficient for the hydrolysis of cellulose, with the maximum total reducing sugars (TRS) yields over 83% at 100 °C. Acidic ionic liquids with analogous structures showed similar catalytic activities. Triethyl-(3-sulfo-propyl)-ammonium hydrogen sulfate (IL-5 in this study) was the optimum ionic liquid for cellulose hydrolysis, with the maximum TRS yield at 100 °C up to 99% when the dosage used was 0.2g. In addition, the water in [BMIM]Cl had negative effect on cellulose hydrolysis. Therefore, controlling the content of water in a comparatively low level is quite necessary.

  9. Thinning of reverse osmosis membranes by ionic liquids

    NASA Astrophysics Data System (ADS)

    Meng, Hong; Gong, Beibei; Geng, Tao; Li, Chunxi

    2014-02-01

    In this study, ionic liquids (ILs) were used to thin out the dense layer and, in turn, tune the surface properties and separation performance of commercial aromatic polyamide reverse osmosis membranes. It was observed that the structure of the ILs and dipping time had a strong impact on the dense layer thickness and morphology. This can be understood in terms of the dissolubility and interaction force between ILs and the organic membrane surface, such as hydrogen bonding and π-π interactions. Among the ILs synthesized, 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) showed the most promising thinning effects. It was observed that the thickness of the dense layer on the surface decreased from 127 to 67 nm after dipping treatment with [BMIM]Cl for 24 h. The water flux was enhanced by 20% at the expense of a slight decline of salt rejection. AFM, contact angle and zeta potential analyses suggest that the surface hydrophilicity and electronegativity increased, while the roughness decreased, which improved the anti-fouling properties.

  10. Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes.

    PubMed

    Mohtar, S S; Tengku Malim Busu, T N Z; Md Noor, A M; Shaari, N; Yusoff, N A; Bustam Khalil, M A; Abdul Mutalib, M I; Mat, H B

    2015-09-01

    The objective of this study is to extract and characterize lignin from oil palm biomass (OPB) by dissolution in 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), followed by the lignin extraction through the CO2 gas purging prior to addition of aluminum potassium sulfate dodecahydrate (AlK(SO4)2 · 12H2O). The lignin yield, Y(L) (%wt.) was found to be dependent of the types of OPB observed for all precipitation methods used. The lignin recovery, RL (%wt.) obtained from CO2-AlK(SO4)2 · 12H2O precipitation was, however dependent on the types of OPB, which contradicted to that of the acidified H2SO4 and HCl solutions of pH 0.7 and 2 precipitations. Only about 54% of lignin was recovered from the OPB. The FTIR results indicate that the monodispersed lignin was successfully extracted from the OPT, OPF and OPEFB having a molecular weight (MW) of 1331, 1263 and 1473 g/mol, and degradation temperature of 215, 207.5 and 272 °C, respectively.

  11. Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids

    NASA Astrophysics Data System (ADS)

    Shahid, Robina; Muhammad, Nawshad; Gonfa, Girma; Toprak, Muhammet S.; Muhammed, Mamoun

    2015-10-01

    Zinc sulfide (ZnS) quantum dots (QDs) were synthesized using the microwave assisted ionic liquid (MAIL) route. Three ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4]), trihexyl(tetradecyl) phosphonium bis(trifluoromethanesulfonyl) amide ([P6,6,6,14][TSFA]) and trihexyl(tetradecyl) phosphonium chloride ([P6,6,6,14][Cl]) were used in this study. The size and structure of the QDs were characterized by high-resolution transmission electron microscopy (HR-TEM) and selected area electron diffraction (SAED) pattern, respectively. The synthesized QDs were of wurtzite crystalline structure with size less than 5 nm. The QDs were more uniformly distributed while using the phosponium based ILs as a reaction medium during synthesis. The optical properties were investigated by UV-vis absorption and photoluminescence (PL) emission spectroscopy. The optical properties of QDs showed the quantum confinement effect in their absorption and the effect of cation and anion structural moiety was observed on their bandedge emission. The QDs emission intensity was measured higher for [P6,6,6,14][Cl] due to their better dispersion as well as high charge density of Cl anion. The capability of the ILs in stabilizing the QDs was interpreted by density functional theory (DFT) computations. The obtained results are in good agreement with the theoretical prediction.

  12. Application and recovery of ionic liquids in the preparative separation of four flavonoids from Rhodiola rosea by on-line three-dimensional liquid chromatography.

    PubMed

    Ma, Shufeng; Hu, Liming; Ma, Chaoyang; Lv, Wenping; Wang, Hongxin

    2014-09-01

    A novel on-line three-dimensional liquid chromatography method was developed to separate four main flavonoids from Rhodiola rosea. Ethyl acetate/0.5 mol/L ionic liquid 1-butyl-3-methylimidazolium chloride aqueous solution was selected as the solvent system. In the first-dimension separation, the target flavonoids were entrapped and subsequently desorbed into the second-dimension high-speed countercurrent chromatographic column for separation. In the third-dimension chromatography, the residual ionic liquid in the four separated flavonoids was removed and the used ionic liquid was recovered. As a result, 35.1 mg of compound 1, 20.4 mg of compound 2, 8.5 mg of compound 3, and 10.6 mg of compound 4 were obtained from 1.53 g R. rosea extract. They were identified as rhodiosin, rhodionin, herbacetin, and kaempferol, respectively. The recovery of ionic liquid reached 99.1% of the initial amount. The results showed that this method is a powerful technology for the separation of R. rosea flavonoids and that the ionic-liquid-based solvent system has advantages over traditional solvent systems in renewable and environmentally friendly properties.

  13. [Headspace GC/MS analysis of residual vinyl chloride and vinylidene chloride in polyvinyl chloride and polyvinylidene chloride products].

    PubMed

    Ohno, Hiroyuki; Mutsuga, Motoh; Kawamura, Yoko; Suzuki, Masako; Aoyama, Taiki

    2005-02-01

    A headspace GC/MS analysis method for the simultaneous determination of residual vinyl chloride (VC) and vinylidene chloride (VDC) in polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) products was developed. A test sample was swelled overnight with N,N-dimethylacetamide in a sealed vial. The vial was incubated for 1 hour at 90 degrees C, then the headspace gas was analyzed by GC/MS using a PLOT capillary column. The recoveries from spiked PVC and PVDC samples were 90.0-112.3% for VC and 85.2-108.3% for VDC. The determination limits were 0.01 microg/g for VC and 0.06/microg/g for VDC, respectively. By this method, VC was detected in two PVC water supply pipes at the levels of 0.61 and 0.01 microg/g. On the other hand, VC and VDC were not detected in any of the food container-packages or toys tested.

  14. Mutagenicity studies of vinyl chloride.

    PubMed Central

    Fabricant, J D; Legator, M S

    1981-01-01

    Mutagenicity studies in both man and in test organisms clearly demonstrate positive mutagenic activity of vinyl chloride. In terms of the mutagenicity studies using a variety of in vitro procedures covering both eukaryotes and prokaryotes, positive effects were found. Cytogenetic in vivo studies in animals and in humans indicate not only somatic mutations, but also germinal effects with this chemical. PMID:7333237

  15. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... acids to form amines that are subsequently reacted with methyl chloride to form the quaternary ammonium... then reacted with 2-ethylhexanal, reduced, methylated, and subsequently reacted with methyl chloride...

  16. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... acids to form amines that are subsequently reacted with methyl chloride to form the quaternary ammonium... then reacted with 2-ethylhexanal, reduced, methylated, and subsequently reacted with methyl chloride...

  17. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, S.J.; Thomas, T.R.

    1975-11-14

    A method is described for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel, and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  18. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, Steven J.; Thomas, Thomas R.

    1977-01-01

    The present invention provides a method for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  19. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  20. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Nannhein, DE; Meshulam-Simon, Galit [Los Altos, CA; McCarty, Perry L [Stanford, CA

    2011-11-22

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  1. Cystic Fibrosis (CF): Chloride Sweat Test

    MedlinePlus

    ... to 2-Year-Old Cystic Fibrosis (CF) Chloride Sweat Test KidsHealth > For Parents > Cystic Fibrosis (CF) Chloride Sweat Test Print A A A What's in this ... en el sudor What It Is A chloride sweat test helps diagnose cystic fibrosis (CF) , an inherited ...

  2. 75 FR 33824 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... COMMISSION Barium Chloride From China Determination On the basis of the record\\1\\ developed in the subject... order on barium chloride from China would be likely to lead to continuation or recurrence of material... Barium Chloride from China: Investigation No. 731-TA-149 (Third Review). By order of the...

  3. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252 Choline chloride. (a) Product. Choline chloride....

  4. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b)...

  5. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  6. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  7. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  8. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL....3845 Stannous chloride. (a) Product. Stannous chloride. (b) Tolerance. This substance is...

  9. 49 CFR 173.322 - Ethyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Ethyl chloride. 173.322 Section 173.322 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.322 Ethyl chloride. Ethyl chloride must...

  10. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... chloride. The food additive stannous chloride may be safely used for color retention in asparagus packed...

  11. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely...

  12. 49 CFR 173.322 - Ethyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Ethyl chloride. 173.322 Section 173.322 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.322 Ethyl chloride. Ethyl chloride must...

  13. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  14. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely...

  15. 49 CFR 173.322 - Ethyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Ethyl chloride. 173.322 Section 173.322 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.322 Ethyl chloride. Ethyl chloride must...

  16. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  17. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL....3845 Stannous chloride. (a) Product. Stannous chloride. (b) Tolerance. This substance is...

  18. 49 CFR 173.322 - Ethyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Ethyl chloride. 173.322 Section 173.322 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.322 Ethyl chloride. Ethyl chloride must...

  19. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL....3845 Stannous chloride. (a) Product. Stannous chloride. (b) Tolerance. This substance is...

  20. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for...

  1. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL....3845 Stannous chloride. (a) Product. Stannous chloride. (b) Tolerance. This substance is...

  2. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  3. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  4. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  5. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  6. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL....3845 Stannous chloride. (a) Product. Stannous chloride. (b) Tolerance. This substance is...

  7. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Dimethyldialkylammonium chloride. 173.400 Section... HUMAN CONSUMPTION Specific Usage Additives § 173.400 Dimethyldialkylammonium chloride. Dimethyldialkylammonium chloride may be safely used in food in accordance with the following prescribed conditions:...

  8. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  9. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  10. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Dimethyldialkylammonium chloride. 173.400 Section... HUMAN CONSUMPTION Specific Usage Additives § 173.400 Dimethyldialkylammonium chloride. Dimethyldialkylammonium chloride may be safely used in food in accordance with the following prescribed conditions:...

  11. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  12. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  13. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely...

  14. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  15. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  16. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  17. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  18. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schulz, W.W.

    1959-08-01

    The removal of chlorides from aqueons solutions is described. The process involves contacting the aqueous chloride containing solution with a benzene solution about 0.005 M in phenyl mercuric acetate whereby the chloride anions are taken up by the organic phase and separating the organic phase from the aqueous solutions.

  19. Cystic Fibrosis (CF): Chloride Sweat Test

    MedlinePlus

    ... 1- to 2-Year-Old Cystic Fibrosis (CF) Chloride Sweat Test KidsHealth > For Parents > Cystic Fibrosis (CF) Chloride Sweat Test A A A What's in this ... cloruro en el sudor What It Is A chloride sweat test helps diagnose cystic fibrosis (CF) , an ...

  20. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  1. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  2. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  3. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  4. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  5. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  6. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  7. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138...

  8. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  9. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  10. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  11. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  12. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  13. Worker exposure to vinyl chloride and poly(vinyl chloride).

    PubMed Central

    Jones, J H

    1981-01-01

    The National Institute for Occupational Safety and Health (NIOSH) in early 1974 began industrial hygiene studies of vinyl chloride exposed workers. Three VC monomer plants, three VC polymerization plants, and seven PVC fabrication plants were surveyed. V polymerization plant workers and workers in one job category in VC monomer plants were exposed to average levels above 1 ppm. The highest average exposure was 22 ppm. NIOSH health hazard evaluation studies since these initial surveys have primarily shown nondetectable levels of vinyl chloride. A NIOSH control technology study in 1977 showed that exposure levels in VC polymerization plants had been drastically reduced but exposure levels above 1 ppm were still found in several cases. PMID:7333231

  14. An XAFS Study of Tantalum Chloride in the Ionic Liquid 1-ethyl-3-methyl Imidazolium Chloride/ aluminum Chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Tantalum chloride was studied with extended X-ray absorption fine structure spectroscopy (XAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride ionic liquids (ILs). Anhydrous Ta2Cl10 is more soluble in the basic solution than in the acidic solution and the X-ray absorption data shows that the coordination shell of chlorides around the tantalum is larger in the basic solution. In the acidic solution, tantalum has five chlorides in its coordination shell while in the basic solution; the tantalum is coordinated by seven chlorides. This indicates that the Lewis acidity of the tantalum chloride causes the Ta to coordinate differently in the acidic and the basic solutions.

  15. Chloride flux out of Yellowstone National Park

    USGS Publications Warehouse

    Norton, D.R.; Friedman, I.

    1985-01-01

    Monitoring of the chloride concentration, electrical conductivity, and discharge was carried out for the four major rivers of Yellowstone National Park from September 1982 to January 1984. Chloride flux out of the Park was determined from the measured values of chloride concentration and discharge. The annual chloride flux from the Park was 5.86 ?? 1010 g. Of this amount 45% was from the Madison River drainage basin, 32% from the Yellowstone River basin, 12% from the Snake River basin, and 11% from the Falls River basin. Of the annual chloride flux from the Yellowstone River drainage basin 36% was attributed to the Yellowstone Lake drainage basin. The geothermal contribution to the chloride flux was determined by subtracting the chloride contribution from rock weathering and atmospheric precipitation and is 94% of the total chloride flux. Calculations of the geothermal chloride flux for each river are given and the implications of an additional chloride flux out of the western Park boundary discussed. An anomalous increase in chloride flux out of the Park was observed for several weeks prior to the Mt. Borah earthquake in Central Idaho on October 28, 1983, reaching a peak value shortly thereafter. It is suggested that the rise in flux was a precursor of the earthquake. The information in this paper provides baseline data against which future changes in the hydrothermal systems can be measured. It also provides measurements related to the thermal contributions from the different drainage basins of the Park. ?? 1985.

  16. Shock compression of polyvinyl chloride

    NASA Astrophysics Data System (ADS)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  17. Salt, chloride, bleach, and innate host defense

    PubMed Central

    Wang, Guoshun; Nauseef, William M.

    2015-01-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  18. Salt, chloride, bleach, and innate host defense.

    PubMed

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense.

  19. An XAFS Study of Niobium chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Niobium chloride was studied with extended X-ray absorption fine structure spectroscopy (EXAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Although anhydrous Nb2Cl10 is more soluble in the basic melt than in the acidic melt, the EXAFS data shows that the coordination shell around the niobium does not change in the different ionic liquids. Both the acidic and basic melts show a coordination of five chlorides in the first shell. This indicates that in this series of ionic liquids, the Nb2Cl10 breaks up into two NbCl5 entities in both the acidic and the basic melts.

  20. Oxomemazine hydro­chloride

    PubMed Central

    Siddegowda, M. S.; Butcher, Ray J.; Akkurt, Mehmet; Yathirajan, H. S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxo­phen­othia­zin-10-yl)-N,N,2-trimethyl­propanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothia­zine unit is 30.5 (2)°. In the crystal, the components are linked by N—H⋯Cl and C—H⋯Cl hydrogen bonds and C—H⋯π inter­actions. PMID:22090928

  1. [Sodium chloride 0.9%: nephrotoxic crystalloid?].

    PubMed

    Dombre, Vincent; De Seigneux, Sophie; Schiffer, Eduardo

    2016-02-03

    Sodium chloride 0.9%, often incorrectly called physiological saline, contains higher concentration of chloride compared to plasma. It is known that the administration of sodium chloride 0.9% can cause hyperchloremic metabolic acidosis in a reproducible manner. The elevated chloride concentration in 0.9% NaCl solution can also adversely affect renal perfusion. This effect is thought to be induced by hyperchloremia that causes renal artery vasoconstriction. For these reasons, the use of 0.9% NaCl solution is raising attention and some would advocate the use of a more "physiological" solution, such as balanced solutions that contain a level of chloride closer to that of plasma. Few prospective, randomized, controlled trials are available today and most were done in a perioperative setting. Some studies suggest that the chloride excess in 0.9% NaCl solution could have clinical consequences; however, this remains to be established by quality randomized controlled trials.

  2. Production of anhydrous aluminum chloride composition

    DOEpatents

    Vandergrift, G.F. III; Krumpelt, M.; Horwitz, E.P.

    1981-10-08

    A process is described for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

  3. Metal chloride cathode for a battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Bankston, C. Perry (Inventor)

    1991-01-01

    A method of fabricating a rechargeable battery is disclosed which includes a positive electrode which contains a chloride of a selected metal when the electrode is in its active state. The improvement comprises fabricating the positive electrode by: providing a porous matrix composed of a metal; providing a solution of the chloride of the selected metal; and impregnating the matrix with the chloride from the solution.

  4. High Efficiency Lithium-Thionyl Chloride Cell.

    DTIC Science & Technology

    1982-04-01

    AD-Al14 672 HONEYWELL POWER SOURCES CENTER HORSHAM PA F/S 10/3 HIGH EFFICIENCY LITHIUM - THIONYL CHLORIDE CELLo(U) APR 82 N DODDAPANEN! OAAK20-81-C...CHART NATIONAl BUREAU OF STANDARDS 1963 A Research and Development Technical Report DELET-TR-81-0381-3 HIGH EFFICIENCY LITHIUM - THIONYL CHLORIDE CELL...reverse aide it necessary and Identify by block number) Thionyl chloride , lithium , high discharge rates, low temperatures, catalysis, cyclic

  5. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS Reg. No. 7786-30-3) is a... prepared by dissolving magnesium oxide, hydroxide, or carbonate in aqueous hydrochloric acid solution...

  6. Determination of Chloride in Hydraulic Fluids.

    DTIC Science & Technology

    1986-10-01

    chloride stock solution (1000 mg/L) was prepared by dissolv- ing sodium chloride in deionized distilled water. A 5M sodium nitrate solu- tion was used as...electrode as the reference electrode. Calibration curves were prepared by measuring the potentials (millivolts) of standard chloride solution (1, 10, 100...Therefore, it is recommended that only 10% (v/v) hydraulic fluid ( ehtylene glycol) solutions be used for analysis. The electrode must not stay in the

  7. Studies on Chloride Channels and their Modulators.

    PubMed

    Patil, Vaishali M; Gupta, Satya P

    2016-01-01

    The prime roles of mutations in the genes, encoding chloride ion channels, in various human diseases of muscle, kidney, bone and brain, such as congenital myotonia, myotonic dystrophy, cystic fibrosis, osteopetrosis, epilepsy, glioma, etc., have been well established. Chloride ion channels are also responsible for glioma progression in brain and malaria parasite in red blood cells. The present article thus emphasises on the various diseases associated with chloride channel regulation and their modulators. Studies on various chloride channels and their modulators have been discussed in detail.

  8. Production of chlorine from chloride salts

    DOEpatents

    Rohrmann, Charles A.

    1981-01-01

    A process for converting chloride salts and sulfuric acid to sulfate salts and elemental chlorine is disclosed. A chloride salt and sulfuric acid are combined in a furnace where they react to produce a sulfate salt and hydrogen chloride. Hydrogen chloride from the furnace contacts a molten salt mixture containing an oxygen compound of vanadium, an alkali metal sulfate and an alkali metal pyrosulfate to recover elemental chlorine. In the absence of an oxygen-bearing gas during the contacting, the vanadium is reduced, but is regenerated to its active higher valence state by separately contacting the molten salt mixture with an oxygen-bearing gas.

  9. Fabrication Of Metal Chloride Cathodes By Sintering

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Di Stefano, Salvador; Bankston, C. Perry

    1992-01-01

    Transition-metal chloride cathodes for use in high-temperature rechargeable sodium batteries prepared by sintering transition-metal powders mixed with sodium chloride. Need for difficult and dangerous chlorination process eliminated. Proportions of transition metal and sodium chloride in mixture adjusted to suit specific requirements. Cathodes integral to sodium/metal-chloride batteries, which have advantages over sodium/sulfur batteries including energy densities, increased safety, reduced material and thermal-management problems, and ease of operation and assembly. Being evaluated for supplying electrical power during peak demand and electric vehicles.

  10. Enrofloxacin hydro-chloride dihydrate.

    PubMed

    Miranda-Calderón, Jorge E; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-04-01

    The asymmetric unit of the title compound, C19H23FN3O3 (+)·Cl(-)·2H2O [systematic name: 4-(3-carb-oxy-1-cyclo-propyl-6-fluoro-4-oxo-1,4-di-hydro-quin-o-lin-7-yl)-1-ethyl-piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol-ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo-propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra-molecular O-H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O-H⋯Cl, N-H⋯Cl and O-H⋯O hydrogen bonds, and a π-π inter-action between the benzene rings [centroid-centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array.

  11. XAFS Studies of Ni Ta and Nb Chlorides in the Ionic Liquid 1-Ethyl-3-Methyl Imidazolium Chloride / Aluminum Chloride

    SciTech Connect

    W OGrady; D Roeper; K Pandya; G Cheek

    2011-12-31

    The structures of anhydrous nickel, niobium, and tantalum chlorides have been investigated in situ in acidic and basic ionic liquids (ILs) of 1-methyl-3-ethylimidazolium chloride (EMIC)/AlCl{sub 3} with X-ray absorption spectroscopy (XAS). The coordination of NiCl{sub 2} changes from tetrahedral in basic solution to octahedral in acidic solution. The NiCl{sub 2} is a strong Lewis acid in that it can induce the AlCl{sub 3} to share its chlorides in the highly acidic IL, forming a structure with six near Cl{sup -} ions and eight further distant Al ions which share the chloride ions surrounding the Ni{sup 2+}. When Nb{sub 2}Cl{sub 10}, a dimer, is added to the acidic or basic solution, the dimer breaks apart and forms two species. In the acid solution, two trigonal bipyramids are formed with five equal chloride distances, while in the basic solution, a square pyramid with four chlorides forming a square base and one shorter axial chloride bond. Ta{sub 2}Cl{sub 10} is also a dimer and divides into half in the acidic solution and forms two trigonal bipyramids. In the basic solution, the dimer breaks apart but the species formed is sufficiently acidic that it attracts two additional chloride ions and forms a seven coordinated tantalum species.

  12. Comparing polyaluminum chloride and ferric chloride for antimony removal.

    PubMed

    Kang, Meea; Kamei, Tasuku; Magara, Yasumoto

    2003-10-01

    Antimony has been one of the contaminants required to be regulated, however, only limited information has been collected to date regarding antimony removal by polyaluminium chloride (PACl) and ferric chloride (FC). Accordingly, the possible use of coagulation by PACl or FC for antimony removal was investigated. Jar tests were used to determine the effects of solution pH, coagulant dosage, and pre-chlorination on the removal of various antimony species. Although high-efficiency antimony removal by aluminum coagulation has been expected because antimony is similar to arsenic in that both antimony and arsenic are a kind of metalloid in group V of the periodic chart, this study indicated: (1) removal density (arsenic or antimony removed per mg coagulant) for antimony by PACl was about one forty-fifth as low as observed for As(V); (2) although the removal of both Sb(III) and Sb(V) by coagulation with FC was much higher than that of PACl, a high coagulant dose of 10.5mg of FeL(-1) at optimal pH of 5.0 was still not sufficient to meet the standard antimony level of 2 microg as SbL(-1) for drinking water when around 6 microg as SbL(-1) were initially present. Consequently, investigation of a more appropriate treatment process is necessary to develop economical Sb reduction; (3) although previous studies concluded that As(V) is more effectively removed than As(III), this study showed that the removal of Sb(III) by coagulation with FC was much more pronounced than that of Sb(V); (4) oxidation of Sb(III) with chlorine decreased the ability of FC to remove antimony. Accordingly, natural water containing Sb(III) under anoxic condition should be coagulated without pre-oxidation.

  13. Electrochemical Behavior of Copper in Thionyl Chloride Solutions.

    DTIC Science & Technology

    1980-12-01

    lithium - thionyl chloride batteries . Thionyl chloride is known *3 to react...electrolyte for lithium - thionyl chloride batteries . 8R. K. McAlpine and B. A. Soule, Prescott and Johnson’s Qualitative Chemical Analysis, D. Van...black carbon electrodes, cupric chloride appears to be a useful cathode additive for lithium - thionyl chloride batteries . Preliminary results2l

  14. Chloride substitution in sodium borohydride

    SciTech Connect

    Ravnsbaek, Dorthe B.; Rude, Line H.; Jensen, Torben R.

    2011-07-15

    The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH{sub 4}, forming Na(BH{sub 4}){sub 0.9}Cl{sub 0.1}, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH{sub 4} is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH{sub 4}){sub 0.43}Cl{sub 0.57}. In addition, annealing results in dissolution of 10-20 mol% NaBH{sub 4} into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements. - Graphical Abstract: Dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. Dissolution is facilitated by two methods: ball milling or annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples. Sample compositions and dissolution mechanism are studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction data. Highlights: > Studies of dissolution of sodium chloride and sodium borohydride into each other. > Solid state diffusion facilitated by mechanical and thermal treatments. > Dissolution is more efficiently induced by heating than by mechanical treatment. > Mechanism for dissolution studied by Rietveld refinement of in situ SR-PXD data.

  15. 75 FR 19657 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-15

    ... Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of Commission... China. SUMMARY: The Commission hereby gives notice that it will proceed with a full review pursuant to... antidumping duty order on barium chloride from China would be likely to lead to continuation or recurrence...

  16. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride....

  17. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride....

  18. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride....

  19. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride....

  20. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  1. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... chloride. Note: The requirements applicable to construction work under this section are identical to...

  2. 29 CFR 1915.1052 - Methylene chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Methylene chloride. 1915.1052 Section 1915.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1052 Methylene chloride. Note: The requirements applicable to shipyard employment under...

  3. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... chloride. Note: The requirements applicable to construction work under this section are identical to...

  4. 29 CFR 1926.1152 - Methylene chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Methylene chloride. 1926.1152 Section 1926.1152 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Methylene chloride. Note: The requirements applicable to construction employment under this section...

  5. 29 CFR 1926.1152 - Methylene chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Methylene chloride. 1926.1152 Section 1926.1152 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Methylene chloride. Note: The requirements applicable to construction employment under this section...

  6. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... chloride. Note: The requirements applicable to construction work under this section are identical to...

  7. 29 CFR 1926.1152 - Methylene chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Methylene chloride. 1926.1152 Section 1926.1152 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Methylene chloride. Note: The requirements applicable to construction employment under this section...

  8. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  9. 29 CFR 1915.1052 - Methylene chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Methylene chloride. 1915.1052 Section 1915.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1052 Methylene chloride. Note: The requirements applicable to shipyard employment under...

  10. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  11. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... chloride. Note: The requirements applicable to construction work under this section are identical to...

  12. 29 CFR 1926.1152 - Methylene chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Methylene chloride. 1926.1152 Section 1926.1152 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Methylene chloride. Note: The requirements applicable to construction employment under this section...

  13. 29 CFR 1915.1052 - Methylene chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Methylene chloride. 1915.1052 Section 1915.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1052 Methylene chloride. Note: The requirements applicable to shipyard employment under...

  14. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  15. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  16. 29 CFR 1926.1117 - Vinyl chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... chloride. Note: The requirements applicable to construction work under this section are identical to...

  17. 29 CFR 1915.1052 - Methylene chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Methylene chloride. 1915.1052 Section 1915.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1052 Methylene chloride. Note: The requirements applicable to shipyard employment under...

  18. 29 CFR 1926.1152 - Methylene chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Methylene chloride. 1926.1152 Section 1926.1152 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... Methylene chloride. Note: The requirements applicable to construction employment under this section...

  19. 29 CFR 1915.1052 - Methylene chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Methylene chloride. 1915.1052 Section 1915.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1052 Methylene chloride. Note: The requirements applicable to shipyard employment under...

  20. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 6 2010-07-01 2010-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  1. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 6 2014-07-01 2013-07-01 true Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  2. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 6 2013-07-01 2013-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  3. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 6 2011-07-01 2011-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  4. 29 CFR 1910.1052 - Methylene Chloride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 6 2012-07-01 2012-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This...

  5. Differences in antibacterial activity of benzalkonium chloride.

    PubMed

    Richards, R M; Mizrahi, L M

    1978-03-01

    Benzalkonium solutions obtained from different manufacturers were shown to have different activities. This difference in activity was related to the composition of the benzalkonium chloride. The potential seriousness of this situation is emphasized, and a recommendation is made that the official monographs on benzalkonium chloride be amended appropriately, noting the apparently superior antibacterial activity of the tetradecyl (C14) homolog.

  6. Process for synthesis of beryllium chloride dietherate

    DOEpatents

    Bergeron, Charles; Bullard, John E.; Morgan, Evan

    1991-01-01

    A low temperature method of producing beryllium chloride dietherate through the addition of hydrogen chloride gas to a mixture of beryllium metal in ether in a reaction vessel is described. A reflux condenser provides an exit for hydrogen produced form the reaction. A distillation condenser later replaces the reflux condenser for purifying the resultant product.

  7. Hydrocracking with molten zinc chloride catalyst containing 2-12% ferrous chloride

    DOEpatents

    Zielke, Clyde W.; Bagshaw, Gary H.

    1981-01-01

    In a process for hydrocracking heavy aromatic polynuclear carbonaceous feedstocks to produce hydrocarbon fuels boiling below about 475.degree. C. by contacting the feedstocks with hydrogen in the presence of a molten zinc chloride catalyst and thereafter separating at least a major portion of the hydrocarbon fuels from the spent molten zinc chloride catalyst, an improvement comprising: adjusting the FeCl.sub.2 content of the molten zinc chloride to from about 2 to about 12 mol percent based on the mixture of ferrous chloride and molten zinc chloride.

  8. Sodium-metal chloride batteries

    NASA Technical Reports Server (NTRS)

    Ratnakumar, B. V.; Attia, A. I.; Halpert, G.

    1992-01-01

    It was concluded that rapid development in the technology of sodium metal chloride batteries has been achieved in the last decade mainly due to the: expertise available with sodium sulfur system; safety; and flexibility in design and fabrication. Long cycle lives of over 1000 and high energy densities of approx. 100 Wh/kg have been demonstrated in both Na/FeCl2 and Na/NiCl2 cells. Optimization of porous cathode and solid electrolyte geometries are essential for further enhancing the battery performance. Fundamental studies confirm the capabilities of these systems. Nickel dichloride emerges as the candidate cathode material for high power density applications such as electric vehicle and space.

  9. Factors influencing electrochemical removal of chloride from concrete

    SciTech Connect

    Arya, C.; Sa`id-Shawqi, Q.; Vassie, P.R.W.

    1996-06-01

    Electrochemical chloride removal was studied using prisms made from concrete containing various levels of chlorides derived from sodium chloride added during mixing. The amount of chloride removed during the treatment was assessed by analyzing the anolyte. Chloride removal increased with increasing applied potential, number of reinforcing bars at a particular depth and initial chloride content of the concrete. A greater percentage of chloride was removed from prisms where the thickness of the chloride bearing layer of concrete was less than the depth of cover to the reinforcement. Where the thickness of the chloride bearing layer exceeded the cover to the reinforcement, the use of an external cathode significantly increased the total amount of chloride removed. Chloride removal from a face remote from the source of the chloride contamination (soffit desalination) was shown to be feasible.

  10. Ionic liquid-assisted separation and determination of selenium species in food and beverage samples by liquid chromatography coupled to hydride generation atomic fluorescence spectrometry.

    PubMed

    Castro Grijalba, Alexander; Fiorentini, Emiliano F; Wuilloud, Rodolfo G

    2017-03-31

    Different ionic liquids (ILs) were assayed as mobile phase modifiers for the separation and determination of selenite [Se(IV)], selenate [Se(VI)], selenomethionine (SeMet) and Se-methylselenocysteine (SeMeSeCys) by reversed-phase high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (RP-HPLC-HG-AFS). The use of several ILs: 1-butyl-3-methylimidazolium chloride, 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), 1-octyl-3-methylimidazolium chloride, 1-dodecyl-3-methylimidazolium bromide, 1-hexadecyl-3-methylimidazolium bromide and tributyl(methyl)phosphonium methylsulphate was evaluated. Also, the effect of pH, buffer type and IL concentration on the separation of Se species was studied. Complete separation was attained within 12min using a C8 column and a gradient performed with a mobile phase containing 0.1% (v/v) [C6mim]Cl at pH 6.0. The proposed method allows the separation of inorganic and organic Se species in a single chromatographic run, adding further benefits over already reported methods based on RP-HPLC. In addition, the influence of ILs on the AFS signals of each Se species was evaluated and a multivariate methodology was used for optimization of AFS sensitivity. The limits of detection were 0.92, 0.86, 1.41 and 1.19μgL(-1) for Se(IV), Se(VI), SeMet and SeMeSeCys, respectively. The method was successfully applied for speciation analysis of Se in complex samples, such as wine, beer, yeast and garlic.

  11. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  12. Biomass Processing using Ionic Liquids for Jet Fuel Production

    DTIC Science & Technology

    2014-04-09

    model compounds) phase diagrams, and Thrust 3: Examination of the activity of cellulase enzymes in ILs for the conversion of cellulose to glucose...1-butyl-3-methylimidazolium acetate, do not result in any significant variation in β-glucosidase cellulase enzyme activity—this is important since

  13. Ionic liquid-in-oil microemulsions.

    PubMed

    Eastoe, Julian; Gold, Sarah; Rogers, Sarah E; Paul, Alison; Welton, Tom; Heenan, Richard K; Grillo, Isabelle

    2005-05-25

    Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets.

  14. Ultrafast Multi-Dimensional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  15. Ultrafast Multi-Dimentional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  16. A Sustainable Approach to the Stereoselective Synthesis of Diazaheptacyclic Cage Systems Based on a Multicomponent Strategy in an Ionic Liquid.

    PubMed

    Suresh Kumar, Raju; Almansour, Abdulrahman I; Arumugam, Natarajan; Altaf, Mohammad; Menéndez, José Carlos; Kumar, Raju Ranjith; Osman, Hasnah

    2016-01-29

    The microwave-assisted three-component reactions of 3,5-bis(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones, acenaphthenequinone and cyclic α-amino acids in an ionic liquid, 1-butyl-3-methylimidazolium bromide, occurred through a domino sequence affording structurally intriguing diazaheptacyclic cage-like compounds in excellent yields.

  17. Ionic Liquid as a Solvent and Catalyst for Acylation of Maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Catalyst-free esterification of maltodextrin was carried out in ionic liquid. Stearate esters of maltodextrin were obtained in various degree of substitution (DS) when vinyl stearate or stearic acid was heated with maltodextrin in ionic liquid, 1-butyl-3-methylimidazolium cyanamide (bmim[dca]). Re...

  18. Esterification of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We shall discuss the use of various ionic liquids in the preparation of starch esters. Starch was reacted with vinyl acetate in different 1-butyl-3-methylimidazolium (bmim) salts as solvents in an effort to produce starches with different acetylation patterns. Overall degree of substitution (DS) w...

  19. Primary Lithium-Thionyl Chloride Cell Evaluation

    DTIC Science & Technology

    1980-08-01

    AD A09466 0 AFWAL-TR-80-2076 PRIMARY LITHIUM THIONYL - CHLORIDE CELL EVALUATION Dr. A.E. Zolla R.R. Waterhouse D.J. DeBiccari G.L. Griffin, Jr. Altus...dS.,_b,I ......... S TYPE OF REPORT A PERIOD COVERED Primary Lithium - Thionyl Chloride Final 9/79 - 4/80 Cell Evaluation, 6 PERFORMING ORG. REPORT...the high performance characteristics of the Altus lithium - thionyl chloride cell. In particular features such as the inherent high energy density, the

  20. Binary Nucleation of Water and Sodium Chloride

    SciTech Connect

    Nemec, Thomas; Marsik, Frantisek; Palmer, Donald

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  1. 75 FR 20625 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-20

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject review. DATES: Effective Date: April 9, 2010. FOR FURTHER INFORMATION CONTACT:...

  2. Catastrophic event modeling. [lithium thionyl chloride batteries

    NASA Technical Reports Server (NTRS)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  3. Crystal structure of 4-carbamoylpyridinium chloride

    PubMed Central

    Fellows, Simon M.; Prior, Timothy J.

    2016-01-01

    The hydro­chloride salt of isonicotinamide, C6H7N2O+·Cl−, has been synthesized from a dilute solution of hydro­chloric acid in aceto­nitrile. The compound displays monoclinic symmetry (space group C2/c) at 150 K, similar to the related hydro­chloride salt of nicotinamide. The asymmetric unit contains one protonated isonicotinamide mol­ecule and a chloride anion. An array of hydrogen-bonding inter­actions, including a peculiar bifurcated pyridinium–chloride inter­action, results in linear chains running almost perpendicularly in the [150] and [1-50] directions within the structure. A description of the hydrogen-bonding network and comparison with similar compounds are presented. PMID:27375858

  4. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... chloride may be present in food under the following conditions: (a) In spice oleoresins as a residue from the extraction of spice, at a level not to exceed 30 parts per million; Provided, That, if residues...

  5. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... chloride may be present in food under the following conditions: (a) In spice oleoresins as a residue from the extraction of spice, at a level not to exceed 30 parts per million; Provided, That, if residues...

  6. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... chloride may be present in food under the following conditions: (a) In spice oleoresins as a residue from the extraction of spice, at a level not to exceed 30 parts per million; Provided, That, if residues...

  7. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... chloride may be present in food under the following conditions: (a) In spice oleoresins as a residue from the extraction of spice, at a level not to exceed 30 parts per million; Provided, That, if residues...

  8. Qualitative Determination of Nitrate with Triphenylbenzylphosphonium Chloride.

    ERIC Educational Resources Information Center

    Berry, Donna A.; Cole, Jerry J.

    1984-01-01

    Discusses two procedures for the identification of nitrate, the standard test ("Brown Ring" test) and a new procedure using triphenylbenzylphosphonium chloride (TPBPC). Effectiveness of both procedures is compared, with the TPBPC test proving to be more sensitive and accurate. (JM)

  9. Vinyl chloride-associated liver disease.

    PubMed

    Berk, P D; Martin, J F; Young, R S; Creech, J; Selikoff, I J; Falk, H; Watanabe, P; Popper, H; Thomas, L

    1976-06-01

    Although polyvinyl chloride has been produced from vinyl chlride monomer for more than 40 years, recognition of toxicity among vinyl chloride polymerization workers is more recent. In the mid 1960s, workers involved in cleaning polymerization tanks were found to have acro-osteolysis. In 1974, the same population of workers was found to be at risk for an unusual type of hepatic fibrosis and angiosarcoma of the liver. We describe two cases of vinyl chloride-associated liver injury, one of hepatic fibrosis and one of angiosarcoma. Histologic features of these lesions are similar to the hepatic fibrosis and angiosarcomas resulting from chronic exposure to inorganic arsenicals. Preliminary studies suggest that the toxicity of vinyl chloride may result from formation, during high-dose exposure, of active metabolites by mixed function oxidases of the liver. Epidemiologic studies indicate an increased incidence not only of liver disease, but also of cancers of the brain, lung, and possibly other organs.

  10. Copper chloride cathode for a secondary battery

    NASA Astrophysics Data System (ADS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Nagasubramanian, Ganesan; Bankston, Clyde P.

    1990-07-01

    Higher energy and power densities are achieved in a secondary battery based on molten sodium and a solid, ceramic separator such as a beta alumina and a molten catholyte such as sodium tetrachloroaluminate and a copper chloride cathode. The higher cell voltage of copper chloride provides higher energy densities and the higher power density results from increased conductivity resulting from formation of copper as discharge proceeds.

  11. The 5-(4-Ethynylophenoxy) isophthalic chloride

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M.; Jensen, B. J. (Inventor)

    1986-01-01

    Sulfone-ester polymers containing pendent ethynyl groups and a direct and multistep process for preparing them are disclosed. The multistep process involves the conversion of a pendent bromo group to the ethynyl group while the direct route involves reating hydroxy-terminated sulfone oligomer or polymers with a stoichiometric amount of 5-(4-ethynylphenoxy) isophthaloyl chloride. The 5-(4-ethynylphenoxy) isophthaloyl chloride and the process for preparing it are also disclosed.

  12. Hydrophilization of Polyvinyl Chloride Surface by Ozonation

    NASA Astrophysics Data System (ADS)

    Kurose, Keisuke; Okuda, Tetsuji; Nakai, Satoshi; Tsai, Tsung-Yueh; Nishijima, Wataru; Okada, Mitsumasa

    The surface modification mechanism of polyvinyl chloride (PVC) by ozonation was investigated to study the selective hydrophilization of PVC surface among other plastics. Infrared analysis confirmed the increase of hydrophilic groups. XPS analysis revealed that the increase was due to the structural change in chlorine group in PVC to hydroxylic acid, ketone, and carboxylic groups by ozonation. This chemical reaction by ozone could occur only for polymers with chlorides in its structure and resulted in the selective hydrophilization of PVC among various polymers.

  13. Copper chloride cathode for a secondary battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Nagasubramanian, Ganesan (Inventor); Bankston, Clyde P. (Inventor)

    1990-01-01

    Higher energy and power densities are achieved in a secondary battery based on molten sodium and a solid, ceramic separator such as a beta alumina and a molten catholyte such as sodium tetrachloroaluminate and a copper chloride cathode. The higher cell voltage of copper chloride provides higher energy densities and the higher power density results from increased conductivity resulting from formation of copper as discharge proceeds.

  14. Abnormal passive chloride absorption in cystic fibrosis jejunum functionally opposes the classic chloride secretory defect.

    PubMed

    Russo, Michael A; Hogenauer, Christoph; Coates, Stephen W; Santa Ana, Carol A; Porter, Jack L; Rosenblatt, Randall L; Emmett, Michael; Fordtran, John S

    2003-07-01

    Due to genetic defects in apical membrane chloride channels, the cystic fibrosis (CF) intestine does not secrete chloride normally. Depressed chloride secretion leaves CF intestinal absorptive processes unopposed, which results in net fluid hyperabsorption, dehydration of intestinal contents, and a propensity to inspissated intestinal obstruction. This theory is based primarily on in vitro studies of jejunal mucosa. To determine if CF patients actually hyperabsorb fluid in vivo, we measured electrolyte and water absorption during steady-state perfusion of the jejunum. As expected, chloride secretion was abnormally low in CF, but surprisingly, there was no net hyperabsorption of sodium or water during perfusion of a balanced electrolyte solution. This suggested that fluid absorption processes are reduced in CF jejunum, and further studies revealed that this was due to a marked depression of passive chloride absorption. Although Na+-glucose cotransport was normal in the CF jejunum, absence of passive chloride absorption completely blocked glucose-stimulated net sodium absorption and reduced glucose-stimulated water absorption 66%. This chloride absorptive abnormality acts in physiological opposition to the classic chloride secretory defect in the CF intestine. By increasing the fluidity of intraluminal contents, absence of passive chloride absorption may reduce the incidence and severity of intestinal disease in patients with CF.

  15. Structure of complexes between aluminum chloride and other chlorides, 2: Alkali-(chloroaluminates). Gaseous complexes

    NASA Technical Reports Server (NTRS)

    Hargittai, M.

    1980-01-01

    The structural chemistry of complexes between aluminum chloride and other metal chlorides is important both for practice and theory. Condensed-phase as well as vapor-phase complexes are of interest. Structural information on such complexes is reviewed. The first emphasis is given to the molten state because of its practical importance. Aluminum chloride forms volatile complexes with other metal chlorides and these vapor-phase complexes are dealt with in the second part. Finally, the variations in molecular shape and geometrical parameters are summarized.

  16. Membrane potential, chloride exchange, and chloride conductance in Ehrlich mouse ascites tumour cells.

    PubMed Central

    Hoffmann, E K; Simonsen, L O; Sjøholm, C

    1979-01-01

    1. The steady-state tracer exchange flux of chloride was measured at 10-150 mM external chloride concentration, substituting either lactate or sucrose for chloride. The chloride flux saturates in both cases with a K 1/2 about 50 and 15 mM, respectively. 2. The inhibitory effect of other monovalent anions on the chloride transport was investigated by measuring the 36Cl- efflux into media where either bromide, nitrate, or thiocyanate had been substituted for part of the chloride. The sequence of increasing affinity for the chloride transport system was found to be: Br- less than Cl- less than SCN- = NO3-. 3. The chloride steady-state exchange flux in the presence of nitrate can be described by Michaelis-Menten kinetics with nitrate as a competitive inhibitor of the chloride flux. 4. The apparent activation energy (EA) was determined to be 67 +/- 6.2 kJ/mole, and was constant between 7 and 38 degrees C. 5. The membrane potential (Vm) was measured as a function of the concentration of external K+, substituting K+ for Na+. The transference number of K+ (tK) was estimated from the slope of Vm vs. log10 (K+)e, and tCl and tNa were calculated, neglecting current carried by ions other than Cl-, K+, and Na+. The diffusional net flux of K+ was calculated from the steady-state exchange flux of 42K+, assuming the flux ratio equation to be valid. From this value the K+ conductance and the Na+ and Cl- conductances were calculated. The experiments showed that GCl, GNa, and GK are all about 14 muS/cm2. 6. The net (conductive) chloride permeability derived from the chloride conductance was 4 x 10(-8) cm/sec compared with the apparent permeability of 6 x 10(-7) cm/sec as calculated from the chloride tracer exchange flux. These data suggest that about 95% of the chloride transport is mediated by an electrically silent exchange diffusion. 7. Comparable effects of phloretin (0.25 mM) on the net (conductive) permeability and the apparent permeability to chloride (about 80% inhibition

  17. 21 CFR 522.1862 - Sterile pralidoxime chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sterile pralidoxime chloride. 522.1862 Section 522....1862 Sterile pralidoxime chloride. (a) Chemical name. 2-Formyl-1-methylpyridinium chloride oxime. (b) Specifications. Sterile pralidoxime chloride is packaged in vials. Each vial contains 1 gram of...

  18. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  19. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  20. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 1 2013-10-01 2013-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  1. 21 CFR 522.1862 - Sterile pralidoxime chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sterile pralidoxime chloride. 522.1862 Section 522....1862 Sterile pralidoxime chloride. (a) Chemical name. 2-Formyl-1-methylpyridinium chloride oxime. (b) Specifications. Sterile pralidoxime chloride is packaged in vials. Each vial contains 1 gram of...

  2. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  3. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  4. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  5. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  6. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 1 2014-10-01 2014-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  7. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Quaternary ammonium chloride combination. 172.165... § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride... the following compounds: n-dodecyl dimethyl benzyl ammonium chloride (CAS Reg. No. 139-07-1);...

  8. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 1 2012-10-01 2012-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  9. Evaluation of the Capability of Ionic Liquid-Amino Acid Aqueous Systems for the Formation of Aqueous Biphasic Systems and Their Applications in Extraction.

    PubMed

    Noshadi, Sajjad; Sadeghi, Rahmat

    2017-03-03

    In order to obtain further experimental evidence for better understanding of the molecular mechanisms responsible for the soluting-out effect phenomena in the ternary systems composed of ionic liquid (IL), amino acid and water, systematic studies on the vapor-liquid, liquid-liquid and solid-liquid equilibrium behavior of aqueous solutions of several ILs were carried out in the presence of a range of amino acids. Water activities for binary and ternary aqueous solutions containing 1-butyl-3-methylimidazolium chloride, [C4mim]Cl, 1-hexyl-3-methylimidazolium chloride, [C6mim]Cl, 1-butyl-3-methyl-imidazolium trifluoromethanesulfonate, [C4mim][CF3SO3], l-serine, glycine, alanine, and l-proline were measured using both vapor pressure osmometry and isopiestic methods. All the ternary IL + amino acid + water systems show the negative deviations from the semi-ideal behavior and therefore the soluting-out effects have been seen in these systems. In the case of [C4mim][CF3SO3] + amino acids aqueous systems, the IL is soluted-out by the amino acids and the soluting-out effect appears by aqueous biphasic systems formation. For these systems, the phase diagram and partition coefficient of caffeine were measured at 298.15 K. However, for the [C4mim]Cl and [C6mim]Cl containing systems, the amino acids are soluted-out by the ILs and the soluting-out effect appears by precipitation of the amino acids from the solution and solubilities of the amino acids in aqueous solutions decrease in the presence of [C4mim]Cl and [C6mim]Cl.

  10. Elucidating interactions and conductivity of newly synthesised low bandgap polymer with protic and aprotic ionic liquids.

    PubMed

    Attri, Pankaj; Lee, Seung-Hyun; Hwang, Sun Woo; Kim, Joong I L; Lee, Sang Woo; Kwon, Gi-Chung; Choi, Eun Ha; Kim, In Tae

    2013-01-01

    In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities.

  11. Elucidating Interactions and Conductivity of Newly Synthesised Low Bandgap Polymer with Protic and Aprotic Ionic Liquids

    PubMed Central

    Attri, Pankaj; Lee, Seung-Hyun; Hwang, Sun Woo; Kim, Joong I. L.; Lee, Sang Woo; Kwon, Gi-Chung; Choi, Eun Ha; Kim, In Tae

    2013-01-01

    In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities. PMID:23874829

  12. Rapid and sensitive analysis of microcystins using ionic liquid-based in situ dispersive liquid-liquid microextraction.

    PubMed

    Yu, Honglian; Clark, Kevin D; Anderson, Jared L

    2015-08-07

    Three structurally different ionic liquids (ILs), namely 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), 1-(6-hydroxyethyl)-3-methylimidazolium chloride ([HeOHMIM][Cl]) and 1-benzyl-3-(2-hydroxyethyl)imidazolium bromide ([BeEOHIM][Br]), were applied as extraction solvents using in situ dispersive liquid-liquid microextraction (in situ DLLME) for the preconcentration of two microcystin variants, microcystin-RR (MC-RR) and microcystin-LR (MC-LR) from aqueous samples. Extraction parameters including sample solution pH, ratio of IL to metathesis reagent, sample volume, IL quantity, and salt concentration were optimized to achieve the best extraction efficiency. The [BeEOHIM][Br] IL, which contains both an aromatic moiety and a hydroxyl group within its chemical structure, exhibited superior extraction efficiency compared to the other two ILs. The analytical performance of the [BeEOHIM][Br] IL as an extraction solvent for in situ DLLME of microcystins was investigated using HPLC-UV and HPLC-MS. The limits of detection (LODs) for MC-RR and MC-LR were 0.7μgL(-1) using UV detection with a linear range from 1 to 50μgL(-1). The separation method was successfully adapted for ESI-MS/SIM detection, wherein the LODs for MC-RR and MC-LR were greatly improved to 0.005 and 0.003μgL(-1), respectively. The accuracy of the method was demonstrated by examining the relative recovery using tap water and river water and produced recoveries ranging from 45.0 to 109.7% and from 46.3 to 103.2%, respectively.

  13. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces.

    PubMed

    Gils, C; Eckhardt, M-C; Nielsen, P E; Nybo, M

    2016-01-01

    Background. Congenital chloride diarrhea (CCD) is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl(-)/HCO3 (-) exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L) and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected.

  14. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    USGS Publications Warehouse

    Tommasso J.R., Wright; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  15. Commercial scale cucumber fermentations brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride instead of NaCl...

  16. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    PubMed Central

    Eckhardt, M.-C.; Nielsen, P. E.

    2016-01-01

    Background. Congenital chloride diarrhea (CCD) is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3− exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L) and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected. PMID:27635272

  17. Fermentation of cucumbers brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Generation of waste water containing sodium chloride from cucumber fermentation tank yards could be eliminated if cucumbers were fermented in brines that did not contain this salt. To determine if this is feasible, cucumbers were fermented in brines that contained only calcium chloride to maintain f...

  18. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... in § 61.66. (3) Leakage from pump, compressor, and agitator seals: (i) Rotating pumps. Vinyl chloride emissions from seals on all rotating pumps in vinyl chloride service are to be minimized by installing sealless pumps, pumps with double mechanical seals or equivalent as provided in § 61.66. If...

  19. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... in § 61.66. (3) Leakage from pump, compressor, and agitator seals: (i) Rotating pumps. Vinyl chloride emissions from seals on all rotating pumps in vinyl chloride service are to be minimized by installing sealless pumps, pumps with double mechanical seals or equivalent as provided in § 61.66. If...

  20. Mechanism for forming hydrogen chloride and sodium sulfate from sulfur trioxide, water, and sodium chloride

    NASA Technical Reports Server (NTRS)

    Anderson, A. B.

    1984-01-01

    A molecular orbital study of sodium sulfate and hydrogen chloride formation from sulfur trioxide, water, and sodium chloride shows no activation barrier, in agreement with recent experimental work of Kohl, Fielder, and Stearns. Two overall steps are found for the process. First, gas-phase water reacts with sulfur trioxide along a pathway involving a linear O-H-O transition state yielding closely associated hydroxyl and bisulfite which rearrange to become a hydrogen sulfate molecule. Then the hydrogen sulfate molecule transfers a hydrogen atom to a surface chloride in solid sodium chloride while an electron and a sodium cation simultaneously transfer to yield sodium bisulfate and gas-phase hydrogen chloride. This process repeats. Both of these steps represent well-known reactions for which mechanisms have not been previously determined.

  1. Xylan hydrolysis in zinc chloride solution

    SciTech Connect

    Cao, N.J.; Xu, Q.; Chen, L.F

    1995-12-31

    Xylan is the major component of hemicellulose, which consists of up to one-third of the lignocellulosic biomass. When the zinc chloride solution was used as a pretreatment agent to facilitate cellulose hydrolysis, hemicellulose was hydrolyzed during the pretreatment stage. In this study, xylan was used as a model to study the hydrolysis of hemicellulose in zinc chloride solution. The degradation of xylose that is released from xylan was reduced by the formation of zinc-xylose complex. The xylose yield was > 90% (w/w) at 70{degrees}C. The yield and rate of hydrolysis were a function of temperature and the concentration of zinc chloride. The ratio of zinc chloride can be decreased from 9 to 1.3 (w/w). At this ratio, 76% of xylose yield was obtained. When wheat straw was pretreated with a concentrated zinc chloride solution, the hemicellulose hydrolysate contained only xylose and trace amounts of arabinose and oligosaccharides. With this approach, the hemicellulose hydrolysate can be separated from cellulose residue, which would be hydrolyzed subsequently to glucose by acid or enzymes to produce glucose. This production scheme provided a method to produce glucose and xylose in different streams, which can be fermented in separated fermenters.

  2. Chloride binding site of neurotransmitter sodium symporters

    PubMed Central

    Kantcheva, Adriana K.; Quick, Matthias; Shi, Lei; Winther, Anne-Marie Lund; Stolzenberg, Sebastian; Weinstein, Harel; Javitch, Jonathan A.; Nissen, Poul

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs have a serine. The LeuT-E290S mutant displays chloride-dependent activity. We show that, in LeuT-E290S cocrystallized with bromide or chloride, the anion is coordinated by side chain hydroxyls from Tyr47, Ser290, and Thr254 and the side chain amide of Gln250. The bound anion and the nearby sodium ion in the Na1 site organize a connection between their coordinating residues and the extracellular gate of LeuT through a continuous H-bond network. The specific insights from the structures, combined with results from substrate binding studies and molecular dynamics simulations, reveal an anion-dependent occlusion mechanism for NSS and shed light on the functional role of chloride binding. PMID:23641004

  3. Advanced intermediate temperature sodium copper chloride battery

    NASA Astrophysics Data System (ADS)

    Yang, Li-Ping; Liu, Xiao-Min; Zhang, Yi-Wei; Yang, Hui; Shen, Xiao-Dong

    2014-12-01

    Sodium metal chloride batteries, also called as ZEBRA batteries, possess many merits such as low cost, high energy density and high safety, but their high operation temperature (270-350 °C) may cause several issues and limit their applications. Therefore, decreasing the operation temperature is of great importance in order to broaden their usage. Using a room temperature ionic liquid (RTIL) catholyte composed of sodium chloride buffered 1-ethyl-3-methylimidazolium chloride-aluminum chloride and a dense β″-aluminates solid electrolyte film with 500 micron thickness, we report an intermediate temperature sodium copper chloride battery which can be operated at only 150 °C, therefore alleviating the corrosion issues, improving the material compatibilities and reducing the operating complexities associated with the conventional ZEBRA batteries. The RTIL presents a high ionic conductivity (0.247 S cm-1) at 150 °C and a wide electrochemical window (-2.6 to 2.18 vs. Al3+/Al). With the discharge plateau at 2.64 V toward sodium and the specific capacity of 285 mAh g-1, this intermediate temperature battery exhibits an energy density (750 mWh g-1) comparable to the conventional ZEBRA batteries (728-785 mWh g-1) and superior to commercialized Li-ion batteries (550-680 mWh g-1), making it very attractive for renewable energy integration and other grid related applications.

  4. Dynamic Electrochemical Measurement of Chloride Ions.

    PubMed

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-02-05

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures.

  5. Electrochemical chloride extraction: efficiency and side effects

    SciTech Connect

    Orellan, J.C.; Escadeillas, G.; Arliguie, G

    2004-02-01

    Some specimens of reinforced concrete cast with an alkali-resistant aggregate, previously maintained in a solution of NaCl, were subjected to an electrochemical chloride extraction (ECE). The chloride profiles before and after treatment were determined. Likewise, alkali ions profiles before and after treatment were determined. After treatment, some specimens were stored in a controlled atmosphere (60 deg. C and 100% RH) in order to accelerate the alkali-silica reaction, if any. Results of chloride content after treatment show that about 40% of the initial chloride is removed within 7 weeks. About one-half of the chloride close to steel was removed, but at the same time, significant amounts of alkali ions were observed around the steel. Microstructural observations by scanning electron microscopy (SEM) showed that after treatment, new cementitious phases containing higher concentrations of sodium, aluminum and potassium were formed. Moreover, alkali-silica gel was observed in the specimens stored at 60 deg. C and 100% RH. It may be possible that the ECE accumulates locally high amounts of alkali ions that stimulate the alkali-silica reaction even though the concrete contained nominally inert siliceous aggregates. The specimen expansions were not recorded, but no cracks were observed.

  6. Chloride binding site of neurotransmitter sodium symporters.

    PubMed

    Kantcheva, Adriana K; Quick, Matthias; Shi, Lei; Winther, Anne-Marie Lund; Stolzenberg, Sebastian; Weinstein, Harel; Javitch, Jonathan A; Nissen, Poul

    2013-05-21

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs have a serine. The LeuT-E290S mutant displays chloride-dependent activity. We show that, in LeuT-E290S cocrystallized with bromide or chloride, the anion is coordinated by side chain hydroxyls from Tyr47, Ser290, and Thr254 and the side chain amide of Gln250. The bound anion and the nearby sodium ion in the Na1 site organize a connection between their coordinating residues and the extracellular gate of LeuT through a continuous H-bond network. The specific insights from the structures, combined with results from substrate binding studies and molecular dynamics simulations, reveal an anion-dependent occlusion mechanism for NSS and shed light on the functional role of chloride binding.

  7. Is sodium chloride worth its salt?

    PubMed

    McIntosh, Euan; Andrews, Peter J

    2013-06-11

    The choice of fluid for resuscitation of the brain-injured patient remains controversial, and the 'ideal' resuscitation fluid has yet to be identified. Large volumes of hypotonic solutions must be avoided because of the risk of cerebral swelling and intracranial hypertension. Traditionally, 0.9% sodium chloride has been used in patients at risk of intracranial hypertension, but there is increasing recognition that 0.9% saline is not without its problems. Roquilly and colleagues show a reduction in the development of hyperchloremic acidosis in brain-injured patients given 'balanced' solutions for maintenance and resuscitation compared with 0.9% sodium chloride. In this commentary, we explore the idea that we should move away from 0.9% sodium chloride in favor of a more 'physiological' solution.

  8. Cesium chloride-induced torsades de pointes.

    PubMed

    Wiens, Matthew; Gordon, Wendy; Baulcomb, Daisy; Mattman, Andre; Mock, Tom; Brown, Robert

    2009-09-01

    The chloride salt of cesium, a group 1A element, is gaining popularity as an alternative treatment of advanced cancers. Cesium chloride has primarily been used in cardiovascular research for arrhythmogenesis in animals because of its potassium-blocking effects. The present report describes a 45-year-old woman with metastatic breast cancer who experienced repeated episodes of torsades de pointes polymorphic ventricular tachycardia after several months of oral cesium therapy. There was a clear temporal relationship between cesium ingestion and the arrhythmia, which later resolved following discontinuation of cesium therapy. Serial cesium plasma and whole blood levels were measured over the ensuing six months and pharmacokinetic analysis was performed.

  9. Measuring Sodium Chloride Contents of Aerosols

    NASA Technical Reports Server (NTRS)

    Sinha, M. P.; Friedlander, S. K.

    1986-01-01

    Amount of sodium chloride in individual aerosol particles measured in real time by analyzer that includes mass spectrometer. Analyzer used to determine mass distributions of active agents in therapeutic or diagnostic aerosols derived from saline solutions and in analyzing ocean spray. Aerosol particles composed of sodium chloride introduced into oven, where individually vaporized on hot wall. Vapor molecules thermally dissociated, and some of resulting sodium atoms ionized on wall. Ions leave oven in burst and analyzed by spectrometer, which is set to monitor sodium-ion intensity.

  10. Hazards of lithium thionyl chloride batteries

    NASA Technical Reports Server (NTRS)

    Parry, J. M.

    1978-01-01

    Two different topics which only relate in that they are pertinent to lithium thionyl chloride battery safety are discussed. The first topic is a hazards analysis of a system (risk assessment), a formal approach that is used in nuclear engineering, predicting oil spills, etc. It is a formalized approach for obtaining assessment of the degree of risk associated with the use of any particular system. The second topic is a small piece of chemistry related to the explosions that can occur with lithium thionyl chloride systems. After the two topics are presented, a discussion is generated among the Workshop participants.

  11. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  12. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  13. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  14. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  15. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  16. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  17. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  18. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  19. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  20. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  1. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  2. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  3. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Choline chloride. 582.5252 Section 582.5252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  4. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  5. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  6. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  7. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or...

  8. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  9. 21 CFR 173.255 - Methylene chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Methylene chloride. 173.255 Section 173.255 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents...

  10. Absorption media for irreversibly gettering thionyl chloride

    DOEpatents

    Buffleben, George; Goods, Steven H.; Shepodd, Timothy; Wheeler, David R.; Whinnery, Jr., LeRoy

    2002-01-01

    Thionyl chloride is a hazardous and reactive chemical used as the liquid cathode in commercial primary batteries. Contrary to previous thinking, ASZM-TEDA.RTM. carbon (Calgon Corporation) reversibly absorbs thionyl chloride. Thus, several candidate materials were examined as irreversible getters for thionyl chloride. The capacity, rate and effect of temperature were also explored. A wide variety of likely materials were investigated through screening experiments focusing on the degree of heat generated by the reaction as well as the material absorption capacity and irreversibility, in order to help narrow the group of possible getter choices. More thorough, quantitative measurements were performed on promising materials. The best performing getter was a mixture of ZnO and ASZM-TEDA.RTM. carbon. In this example, the ZnO reacts with thionyl chloride to form ZnCl.sub.2 and SO.sub.2. The SO.sub.2 is then irreversibly gettered by ASZM-TEDA.RTM. carbon. This combination of ZnO and carbon has a high capacity, is irreversible and functions effectively above -20.degree. C.

  11. 29 CFR 1910.1017 - Vinyl chloride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., including the following topics: (A) Alcohol intake; (B) Past history of hepatitis; (C) Work history and past... more comprehensive examination on repeated abnormal serum tests: Hepatitis B antigen, and liver... section. (b) Definitions—(1) Action level means a concentration of vinyl chloride of 0.5 ppm averaged...

  12. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and... hexahydrate (iron (III) chloride hexahydrate, FeC13. 6H20, CAS Reg. No. 10025-77-1) is readily formed...

  13. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and... hexahydrate (iron (III) chloride hexahydrate, FeC13. 6H20, CAS Reg. No. 10025-77-1) is readily formed...

  14. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and... hexahydrate (iron (III) chloride hexahydrate, FeC13. 6H20, CAS Reg. No. 10025-77-1) is readily formed...

  15. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... hydrochloric acid. The resulting solution is neutralized to precipitate heavy metals, filtered, concentrated... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  16. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... hydrochloric acid. The resulting solution is neutralized to precipitate heavy metals, filtered, concentrated... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  17. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... hydrochloric acid. The resulting solution is neutralized to precipitate heavy metals, filtered, concentrated... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  18. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... solution is neutralized to precipitate heavy metals, filtered, concentrated, and crystallized. (b) The... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED)...

  19. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... hydrochloric acid. The resulting solution is neutralized to precipitate heavy metals, filtered, concentrated... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  20. Controlling chloride ions diffusion in concrete.

    PubMed

    Zeng, Lunwu; Song, Runxia

    2013-11-28

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle.

  1. Amperometric Sensor for Detection of Chloride Ions†

    PubMed Central

    Trnkova, Libuse; Adam, Vojtech; Hubalek, Jaromir; Babula, Petr; Kizek, Rene

    2008-01-01

    Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE) and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N) for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV) we estimated the limit of detection (3 S/N) as 500 nM. PMID:27873832

  2. Mercuric chloride (HgCl2)

    Integrated Risk Information System (IRIS)

    Mercuric chloride ( HgCl2 ) ; CASRN 7487 - 94 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Nonc

  3. Localized corrosion in halides other than chlorides

    SciTech Connect

    Koch, G.H.

    1995-12-31

    This literature survey characterizes the effects of non-chloride halides on localized corrosion. It includes published material and unpublished data obtained through a questionnaire. Chapters cover Stainless Steels, Nickel, Titanium, and Zirconium. The engineer can use this information for material selection.

  4. Solvothermal synthesis of strontium phosphate chloride nanowire

    NASA Astrophysics Data System (ADS)

    Lam, W. M.; Wong, C. T.; Li, Z. Y.; Luk, K. D. K.; Chan, W. K.; Yang, C.; Chiu, K. Y.; Xu, B.; Lu, W. W.

    2007-08-01

    Strontium phosphate chloride nanowire was synthesized via a solvothermal treatment of strontium tri-polyphosphate and Collin salt in 1,4-dioxane at 150 °C. The effects of 1,4-dioxane concentration on particle morphology, crystallinity and phase purity were investigated in this study. The specimen morphology was analyzed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). When the concentration of 1,4-dioxane was below 10%, micron-sized whisker was the dominant form. At 20-25% concentration of 1,4-dioxane, strontium phosphate chloride single-crystalline nanowire was 31±12 nm in diameter and 1.43±0.6 μm in length with an aspect ratio of 52.28±29.41. X-ray diffraction (XRD) pattern of this nanowire matched with that of strontium phosphate chloride (JCPDS #083-0973). When 1,4-dioxane concentration exceeded 25%, nanorod aggregate was the dominant form instead of nanowire. At 20-25% 1,4-dioxane concentration suitable strontium concentration combine with high chemical potential environment favors the formation of nanowires. By adding 1,4-dioxane impure phase such as β-strontium hydrogen phosphate, nanorod formation was suppressed. This method provides an efficient way to synthesize high aspect ratio strontium phosphate chloride nanowire. It has potential bioactive nanocomposite, high mechanical performance bioactive bone cement filler and fluorescent material applications.

  5. MERCURIC CHLORIDE CAPTURE BY ALKALINE SORBENTS

    EPA Science Inventory

    The paper gives results of bench-scale mechanistic studies of mercury/sorbent reactions that showed that mercuric chloride (HgC12) is readily adsorbed by alkaline sorbents, which may offers a less expensive alternative to the use of activated carbons. A laboratory-scale, fixed-b...

  6. Modulation of cellulase activity by charged lipid bilayers with different acyl chain properties for efficient hydrolysis of ionic liquid-pretreated cellulose.

    PubMed

    Mihono, Kai; Ohtsu, Takeshi; Ohtani, Mai; Yoshimoto, Makoto; Kamimura, Akio

    2016-10-01

    The stability of cellulase activity in the presence of ionic liquids (ILs) is critical for the enzymatic hydrolysis of insoluble cellulose pretreated with ILs. In this work, cellulase was incorporated in the liposomes composed of negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) and zwitterionic phosphatidylcholines (PCs) with different length and degree of unsaturation of the acyl chains. The liposomal cellulase-catalyzed reaction was performed at 45°C in the acetate buffer solution (pH 4.8) with 2.0g/L CC31 as cellulosic substrate. The crystallinity of CC31 was reduced by treating with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at 120°C for 30min. The liposomal cellulase continuously catalyzed hydrolysis of the pretreated CC31 for 48h producing glucose in the presence of 15wt% [Bmim]Cl. The charged lipid membranes were interactive with [Bmim](+), as elucidated by the [Bmim]Cl-induced alterations in fluorescence polarization of the membrane-embedded 1,6-diphenyl-1,3,5-hexatriene (DPH) molecules. The charged membranes offered the microenvironment where inhibitory effects of [Bmim]Cl on the cellulase activity was relieved. The maximum glucose productivity GP of 10.8 mmol-glucose/(hmol-lipid) was obtained at the reaction time of 48h with the cellulase incorporated in the liposomes ([lipid]=5.0mM) composed of 50mol% POPG and 1,2-dilauroyl-sn-glycero-3-phosohocholine (DLPC) with relatively short and saturated acyl chains.

  7. Ion yields for some salts in MALDI: mechanism for the gas-phase ion formation from preformed ions.

    PubMed

    Moon, Jeong Hee; Shin, Young Sik; Bae, Yong Jin; Kim, Myung Soo

    2012-01-01

    Preformed ion emission is the main assumption in one of the prevailing theories for peptide and protein ion formation in matrix-assisted laser desorption ionization (MALDI). Since salts are in preformed ion forms in the matrix-analyte mixture, they are ideal systems to study the characteristics of preformed ion emission. In this work, a reliable method to measure the ion yield (IY) in MALDI was developed and used for a solid salt benzyltriphenylphosphonium chloride and two room-temperature ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate and trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate. IY for the matrix (α-cyano-4-hydroxycinnamic acid, CHCA) was also measured. Taking 1 pmol salts in 25 nmol CHCA as examples, IYs for three salts were similar, (4-8) × 10(-4), and those for CHCA were (0.8-1.2) × 10(-7). Even though IYs for the salts and CHCA remained virtually constant at low analyte concentration, they decreased as the salt concentrations increased. Two models, Model 1 and Model 2, were proposed to explain low IYs for the salts and the concentration dependences. Both models are based on the fact that the ion-pair formation equilibrium is highly shifted toward the neutral ion pair. In Model 1, the gas-phase analyte cations were proposed to originate from the same cations in the solid that were dielectrically screened from counter anions by matrix neutrals. In Model 2, preformed ions were assumed to be released from the solid sample in the form of neutral ion pairs and the anions in the ion pairs were assumed to be eliminated via reactions with matrix-derived cations.

  8. Coated capillaries with highly charged polyelectrolytes and carbon nanotubes co-aggregated with sodium dodecyl sulphate for the analysis of sulfonylureas by capillary electrophoresis.

    PubMed

    El-Debs, Racha; Nehmé, Reine; Claude, Bérengère; Motteau, Solène; Togola, Anne; Berho, Catherine; Morin, Philippe

    2014-11-07

    Sulfonylureas (SUs) are one of the most widely used herbicides to control weeds in crops. Herein, capillary electrophoresis (CE) was used to determine four sulfonylureas in natural waters, namely chlorsulfuron (CS), iodosulfuron methyl (IM), metsulfuron methyl (MSM) and mesosulfuron methyl (MSS). First of all, a bare silica capillary was chosen with 10mM of 1-butyl-3-methylimidazolium tetrafluoroborate (bminBF4) as electrophoretic buffer (pH 9.6) containing 2 mg L(-1) of surfactant-coated single-wall carbon nanotubes (SC-SWCNTs). A dramatic deviation in migration times was observed. Therefore, a poly(diallyldimethylammonium) chloride (PDADMAC) statically coated cationic capillary was used to improve repeatability and to alter the selectivity of the separation. The electroosmotic flow (EOF) measurement revealed that the SC-SWCNTs were strongly adsorbed at the surface of the PDADMAC coating even in the absence of the surfactant-coated nanotubes in the electrolyte buffer. Consequently, a stable strong cathodic EOF and excellent repeatabilities were obtained with relative standard deviations (RSDs) on migration times and on corrected peak areas below 0.9 and 1.5%, respectively. The separation of the SUs was conducted in only 6 min. No regeneration of the coating between analyses was necessary, and high peak efficiencies up to 173,000 theoretical plates were obtained. The bi-layer coating was subsequently used to analyze sulfonylureas in tap water, in several mineral waters as well as in underground waters spiked with SUs and directly injected into the CE capillary.

  9. A hydrophobic ionic liquid compartmentalized sampling/labeling and its separation techniques in polydimethylsiloxane microchip capillary electrophoresis.

    PubMed

    Quan, Hong Hua; Li, Ming; Huang, Yan; Hahn, Jong Hoon

    2017-01-01

    This paper demonstrates a novel compartmentalized sampling/labeling method and its separation techniques using a hydrophobic ionic liquid (IL)-1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imidate (BmimNTf2 )-as the immiscible phase, which is capable of minimizing signal losses during microchip capillary electrophoresis (MCE). The MCE device consists of a silica tube connected to a straight polydimethylsiloxane (PDMS) separation channel. Poly(diallyldimethylammonium chloride) (PDDAC) was coated on the inner surface of channel to ease the introduction of IL plugs and enhance the IL wetting on the PDMS surface for sample releasing. Electroosmotic flow (EOF)-based sample compartmentalization was carried out through a sequenced injection into sampling tubes with the following order: leading IL plug/sample segment/terminal IL plug. The movement of the sample segment was easily controlled by applying an electrical voltage across both ends of the chip without a sample volume change. This approach effectively prevented analyte diffusion before injection into MCE channels. When the sample segment was manipulated to the PDDAC-modified PDMS channel, the sample plug then was released from isolation under EOF while IL plugs adsorbed onto channel surfaces owing to strong adhesion. A mixture of flavin adenine nucleotides (FAD) and flavin mononucleotides (FMN) was successfully separated on a 2.5 cm long separation channel, for which the theoretical numbers of plates were 15 000 and 17 000, respectively. The obtained peak intensity was increased 6.3-fold over the corresponding value from conventional electrokinetic injection with the same sampling time. Furthermore, based on the compartmented sample segment serving as an interim reactor, an on-chip fluorescence labeling is demonstrated.

  10. Fractionation of bagasse into cellulose, hemicelluloses, and lignin with ionic liquid treatment followed by alkaline extraction.

    PubMed

    Lan, Wu; Liu, Chuan-Fu; Sun, Run-Cang

    2011-08-24

    Lignocellulose materials are potentially valuable resources for transformation into biofuels and bioproducts. However, their complicated structures make it difficult to fractionate them into cellulose, hemicelluloses, and lignin, which limits their utilization and economical conversion into value-added products. This study proposes a novel and feasible fractionation method based on complete dissolution of bagasse in 1-butyl-3-methylimidazolium chloride ([C(4)mim]Cl) followed by precipitation in acetone/water (9:1, v/v) and extraction with 3% NaOH solution. The ionic liquid [C(4)mim]Cl was easily recycled after concentration and treatment with acetonitrile. (1)H NMR analysis confirmed that there was no obvious difference between the recycled [C(4)mim]Cl and fresh material. Bagasse was fractionated with this method to 36.78% cellulose, 26.04% hemicelluloses, and 10.51% lignin, accounting for 47.17 and 33.85% of the original polysaccharides and 54.62% of the original lignin, respectively. The physicochemical properties of the isolated fractions were characterized by chemical analysis, high-performance anion exchange chromatography (HPAEC), gel permeation chromatography (GPC), Fourier transform infrared (FT-IR), and (1)H and 2D (13)C-(1)H correlation (HSQC) nuclear magnetic resonance spectroscopy. The results showed that the acetone-soluble lignin and alkaline lignin fractions had structures similar to those of milled wood lignin (MWL). The easy extraction of the noncellulose components from homogeneous bagasse solution and amorphous regenerated materials resulted in the relatively high purity of cellulosic fraction (>92%). The hemicellulosic fraction was mainly 4-O-methyl-D-glucuronoxylans with some α-L-arabinofuranosyl units substituted at C-2 and C-3.

  11. Base-Promoted Ammonia Borane Hydrogen-Release

    SciTech Connect

    Himmelberger, Daniel W.; Yoon, Chang W.; Bluhm, Martin E.; Carroll, Patrick J.; Sneddon, Larry G.

    2009-10-07

    The strong non-nucleophilic base bis(dimethylamino)naphthalene (Proton Sponge, PS) has been found to promote the rate and extent of H2-release from ammonia borane (AB) either in the solid state or in ionic-liquid and tetraglyme solutions. For example, AB reactions in 1-butyl-3-methylimidazolium chloride (bmimCl) containing 5.3 mol % PS released 2 equiv of H2 in 171 min at 85 °C and only 9 min at 110 °C, whereas comparable reactions without PS required 316 min at 85 °C and 20 min at 110 °C. Ionic-liquid solvents proved more favorable than tetraglyme since they reduced the formation of undesirable products such as borazine. Solid-state and solution 11B NMR studies of PS-promoted reactions in progress support a reaction pathway involving initial AB deprotonation to form the H3BNH2 - anion. This anion can then initiate AB dehydropolymerization to form branched-chain polyaminoborane polymers. Subsequent chain-branching and dehydrogenation reactions lead ultimately to a cross-linked polyborazylene-type product. AB dehydrogenation by lithium and potassium triethylborohydride was found to produce the stabilized Et3BNH2BH3 - anion, with the crystallographically determined structure of the [Et3BNH2BH3]-K+ · 18-crown-6 complex showing that, following AB nitrogen-deprotonation by the triethylborohydride, the Lewis-acidic triethylborane group coordinated at the nitrogen. Model studies of the reactions of [Et3BNH2BH3]-Li+ with AB show evidence of chain-growth, providing additional support for a PS-promoted AB anionic dehydropolymerization H2- release process.

  12. Probing the Interaction between a DNA Nucleotide (Adenosine-5'-Monophosphate Disodium) and Surface Active Ionic Liquids by Rotational Relaxation Measurement and Fluorescence Correlation Spectroscopy.

    PubMed

    Roy, Arpita; Banerjee, Pavel; Dutta, Rupam; Kundu, Sangita; Sarkar, Nilmoni

    2016-10-02

    This article demonstrates the interaction of a deoxyribonucleic acid (DNA) nucleotide, adenosine-5'-monophosphate disodium (AMP) with a cationic surface active ionic liquid (SAIL) 1-dodecyl-3-methylimidazoium chloride (C12mimCl) and an anionic SAIL, 1-butyl-3-methylimidazolium n-octylsulfate ([C4mim][C8SO4]). Dynamic light scattering (DLS) measurements and 1H NMR (nuclear magnetic resonance) studies indicate that substantial interaction is taking place among the DNA nucleotide, AMP and the SAILs. Moreover, cryogenic transmission electron microscopy (cryo-TEM) suggests that SAILs containing micellar assemblies are transformed into larger micellar assemblies in presence of DNA nucleotide. Additionally, the rotational motion of two oppositely charged molecules, Rhodamine 6G perchlorate (R6G) and Fluorescein sodium salt (Fl-Na) have been monitored in these aggregates. The rotational motion of R6G and Fl-Na differs significantly between SAILs micelles, and SAILs-AMP containing larger micellar aggregates. The effect of negatively charged DNA nucleotide (AMP) addition into the cationic and anionic SAILs is more prominent for the cationic charged molecule R6G than that of anionic probe Fl-Na due to the favourable electrostatic interaction between the AMP and cationic R6G. Moreover, the influence of the anionic DNA nucleotide on the cationic and anionic SAIL micelles is monitored through the variation of the lateral diffusion motion of oppositely charged probe molecules (R6G and Fl-Na) inside these aggregates. This variation in diffusion coefficient values also suggests that interaction pattern of these oppositely charged probes are different within the SAILs-nucleotide containing aggregates. Therefore, both rotational and translational diffusion measurements confirm that the DNA nucleotide (AMP) renders more rigid microenvironment within the micellar solution of SAILs.

  13. Hydrolysis of ferric chloride in solution

    SciTech Connect

    Lussiez, G.; Beckstead, L.

    1996-11-01

    The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.

  14. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    NASA Astrophysics Data System (ADS)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  15. Vinyl chloride and polyvinyl chloride: Toxicology. (Latest citations from the Life Sciences Collection database). Published Search

    SciTech Connect

    1995-12-01

    The bibliography contains citations concerning the toxicity of vinyl chloride and polyvinyl chloride following short- and long-term exposure. The citations explore how these compounds are metabolized and consider their carcinogenic and teratogenetic potential. Methodologies to quantitate their presence in atmospheric dust and body tissues are discussed. Occupational hazards are also noted.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  16. An Improved Analytical Method for Atmospheric Chlorides in Tropic Tests

    DTIC Science & Technology

    1975-07-01

    Chloride Electrode Chloride Analysis Methodology Tropic Regions Diphenylcarbazone- Panama Canal Zone Tropic Test Center Bromphenol Blue Salt Wet Candle 20...ambient salt has been measured for corrosion studies by wet- candle sampling and determining water-soluble chlorides by manual mercuric nitrate titration...of total chloride in wet- candle samplers. For the past 8 years atmospheric salt has been measured at tropic test sites by the wet- candle method

  17. Stability of Alprostadil in 0.9% Sodium Chloride Stored in Polyvinyl Chloride Containers.

    PubMed

    McCluskey, Susan V; Kirkham, Kylian; Munson, Jessica M

    2017-01-01

    The stability of alprostadil diluted in 0.9% sodium chloride stored in polyvinyl chloride (VIAFLEX) containers at refrigerated temperature, protected from light, is reported. Five solutions of alprostadil 11 mcg/mL were prepared in 250 mL 0.9% sodium chloride polyvinyl chloride (PL146) containers. The final concentration of alcohol was 2%. Samples were stored under refrigeration (2°C to 8°C) with protection from light. Two containers were submitted for potency testing and analyzed in duplicate with the stability-indicating high-performance liquid chromatography assay at specific time points over 14 days. Three containers were submitted for pH and visual testing at specific time points over 14 days. Stability was defined as retention of 90% to 110% of initial alprostadil concentration, with maintenance of the original clear, colorless, and visually particulate-free solution. Study results reported retention of 90% to 110% initial alprostadil concentration at all time points through day 10. One sample exceeded 110% potency at day 14. pH values did not change appreciably over the 14 days. There were no color changes or particle formation detected in the solutions over the study period. This study concluded that during refrigerated, light-protected storage in polyvinyl chloride (VIAFLEX) containers, a commercial alcohol-containing alprostadil formulation diluted to 11 mcg/mL with 0.9% sodium chloride 250 mL was stable for 10 days.

  18. Determination of mercurous chloride and total mercury in mercury ores

    USGS Publications Warehouse

    Fahey, J.J.

    1937-01-01

    A method for the determination of mercurous chloride and total mercury on the same sample is described. The mercury minerals are volatilized in a glass tube and brought into intimate contact with granulated sodium carbonate. The chlorine is fixed as sodium chloride, determined with silver nitrate, and computed to mercurous chloride. The mercury is collected on a previously weighed gold coil and weighed.

  19. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  20. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  1. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  2. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  3. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  4. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  5. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  6. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  7. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  8. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated liquid must comply with the following special requirements: (a) The tank car must comply...

  9. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated liquid must comply with the following special requirements: (a) The tank car must comply...

  10. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated liquid must comply with the following special requirements: (a) The tank car must comply...

  11. Making Positive Electrodes For Sodium/Metal Chloride Cells

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Bankston, C. Perry

    1992-01-01

    High coulombic yields provided by sodium/metal chloride battery in which cathode formed by impregnating sintered nickel plaque with saturated solution of nickel chloride. Charge/discharge cycling of nickel chloride electrode results in very little loss of capacity. Used in spacecraft, electric land vehicles, and other applications in which high-energy-density power systems required.

  12. 21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Vinyl chloride-ethylene copolymers. 177.1950... Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1950 Vinyl chloride-ethylene copolymers. The vinyl chloride-ethylene copolymers identified in paragraph (a) of this section may be...

  13. 21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Vinyl chloride-ethylene copolymers. 177.1950... Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1950 Vinyl chloride-ethylene copolymers. The vinyl chloride-ethylene copolymers identified in paragraph (a) of this section may be...

  14. 21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Vinyl chloride-ethylene copolymers. 177.1950... Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1950 Vinyl chloride-ethylene copolymers. The vinyl chloride-ethylene copolymers identified in paragraph (a) of this section may be...

  15. 21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Vinyl chloride-ethylene copolymers. 177.1950... Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1950 Vinyl chloride-ethylene copolymers. The vinyl chloride-ethylene copolymers identified in paragraph (a) of this section may be...

  16. Densities, Electrical Conductivities, Viscosities and Phase Equilibria of 1,3-Dialkylimidazolium Chloride - Aluminum Chloride Binary and Ternary Melts.

    DTIC Science & Technology

    1982-07-01

    FRANK J. SELLER RESEARCH LABORATORY FJSRL-TR-82-0006 JULY 1982 DENSITIES, ELEC’TRICAL CONDUCTIVITIES, VISCOSITIES AND PHASE EQUILIBRIA OF 1,3...Conductivities, Viscosities and Phase Equilibria of 1,3- Interim 6/81-7/82 Dialkylimidazolium Chloride-Aluminum Chloride 6. PERFORMING ORG. REPORT NUMBER...Entered) FJSRL-TR-82-0006 DENSITIES, ELECTRICAL CONDUCTIVITIES, VISCOSITIES AND PHASE EQUILIBRIA OF 1,3-DIALKYLIMIDAZOLIUM CHLORIDE- ALUMINUM CHLORIDE

  17. Method for the regeneration of spent molten zinc chloride

    DOEpatents

    Zielke, Clyde W.; Rosenhoover, William A.

    1981-01-01

    In a process for regenerating spent molten zinc chloride which has been used in the hydrocracking of coal or ash-containing polynuclear aromatic hydrocarbonaceous materials derived therefrom and which contains zinc chloride, zinc oxide, zinc oxide complexes and ash-containing carbonaceous residue, by incinerating the spent molten zinc chloride to vaporize the zinc chloride for subsequent condensation to produce a purified molten zinc chloride: an improvement comprising the use of clay in the incineration zone to suppress the vaporization of metals other than zinc. Optionally water is used in conjunction with the clay to further suppress the vaporization of metals other than zinc.

  18. Iron (III) chloride doping of CVD graphene.

    PubMed

    Song, Yi; Fang, Wenjing; Hsu, Allen L; Kong, Jing

    2014-10-03

    Chemical doping has been shown as an effective method of reducing the sheet resistance of graphene. We present the results of our investigations into doping large area chemical vapor deposition graphene using Iron (III) Chloride (FeCl(3)). It is shown that evaporating FeCl(3) can increase the carrier concentration of monolayer graphene to greater than 10(14) cm(-2) and achieve resistances as low as 72 Ω sq(-1). We also evaluate other important properties of the doped graphene such as surface cleanliness, air stability, and solvent stability. Furthermore, we compare FeCl(3) to three other common dopants: Gold (III) Chloride (AuCl(3)), Nitric Acid (HNO(3)), and TFSA ((CF(3)SO(2))(2)NH). We show that compared to these dopants, FeCl(3) can not only achieve better sheet resistance but also has other key advantages including better solvent stability.

  19. Benzalkonium chloride. Health hazard evaluation report

    SciTech Connect

    Bernholc, N.M.

    1984-01-01

    Health hazards associated with the use of benzalkonium chlorides (BAC) are reviewed. Benzalkonium chloride is extensively used as a cationic disinfectant. It is found in a great many over-the-counter and prescription eye products, disinfectants, shampoos, and deodorants, and is used in concentrations that range from 0.001 to 0.01% in eyedrops, up to 2.5% in concentrated liquid disinfectants. Solutions of 0.03 to 0.04% BAC may cause temporary eye irritation in humans but are unlikely to cause any skin response except in persons allergic to quaternary ammonium compounds. Inhalation of a vaporized 10% solution of BAC produced a bronchospasmodic reaction in a previously sensitized individual. At present no other human health effects from BAC have been documented or inferred from exposure to such dilute concentrations.

  20. Calcium/thionyl chloride battery technology

    NASA Astrophysics Data System (ADS)

    Counts, T.

    1985-12-01

    This final report documents the development efforts conducted by the Lithium Batteries Group of the Couples Department of Eagle-Picher Industries. The objective of the project was to develop calcium-thionyl chloride cell technology. The original project was divided into two main tasks. Task One was to consist of component optimization and stability studies. Once sufficiently advanced, the ongoing results of Task One were to be integrated with Task Two. Task Two was to consist of demonstration of an optimized primary cell. In July, 1983, the program was redirected. Task Two was split, with effort to be directed toward both the original primary cell and toward a high discharge rate reserve configuration cell. Additional electrolyte salts were to be evaluated as a means of improving the storability of the active calcium-thionyl chloride cell.

  1. Ammonium chloride poisoning in chronic renal disease

    PubMed Central

    Levene, Donald L.; Knight, Allan

    1974-01-01

    A 58-year-old woman with a long history of renal stone disease and urinary tract infection presented to the emergency room with exhaustion and air hunger. Laboratory data confirmed profound metabolic acidosis. Unduly large quantities of bicarbonate and potassium were required for correction of the deficits. She had been taking 6 g daily of ammonium chloride as a urine-acidifying agent for a period of six months in addition to agents directed against urinary tract infection. The combination of impaired renal function and effective hydrogen ion loading resulted in profound systemic acidosis. The metabolic derangements associated with the administration of ammonium chloride and its use as a therapeutic agent are discussed. PMID:4850503

  2. Watershed scale chloride storage across a gradient of urbanization

    NASA Astrophysics Data System (ADS)

    Wellen, C. C.; Oswald, C. J.; Oni, S. K.

    2014-12-01

    Sodium chloride is the main de-icing agent used during the winter in Canada and the northern United States. However, little is known about the long term fate, residence time, and ecological effects of chloride. This talk integrates work taking place across three sites in Southern Ontario, Canada: Hamilton Harbour, the Toronto lakeshore, and Lake Simcoe. We quantify chloride inputs, outputs, and changes in storage for a number of watersheds across a gradient of urbanization. For the three winter months (January, February, March), we show that stream water chloride concentrations approach those of brackish waters for urban watersheds. Chloride is also highly persistent, with stream water chloride concentrations decreasing from the winter months and approaching baseline levels only in July. These baseline levels are greater than 100 mg Cl/l in the urban watersheds, suggesting high levels of chloride storage in soil and groundwater. Using road salt application rates and groundwater levels and chloride concentrations, we estimate the magnitude and residence time of the chloride pools in a number of watersheds across a gradient of urbanization. Our results suggest that the magnitude and residence time of chloride storage varies with urbanization and other factors. We show that summer baseflow concentrations do approach the EPA's chronic exposure guideline of 230 mg Cl/l, implying more work is needed to understand the in stream and downstream ecological effects of chloride.

  3. Methyl chloride via oxyhydrochlorination of methane

    SciTech Connect

    Naasz, B.

    1992-02-10

    Purpose of this contract is to develop a process for converting light alkane gases to methyl chloride via oxyhydrochlorination using highly selective, stable catalysts (Cu) in either fixed-bed or fluid-bed reactors. Catalyst development and micro-packed bed screening studies are underway. Engineering support for pre-design on the miniplant is struggling with the unit operations problem associated with separation of products from unreacted methane.

  4. Removing Chlorides From Metallurgical-Grade Silicon

    NASA Technical Reports Server (NTRS)

    Breneman, W. C.; Coleman, L. M.

    1982-01-01

    Process for making low-cost silicon for solar cells is further improved. Silane product recycled to feed stripper column converts some of heavy impurities to volatile ones that pass off at top of column with light wastes. Impurities--chlorides of arsenic, phosphorus, and boron-would otherwise be carried to subsequent distillations where they would be difficult to remove. Since only a small amount of silane is recycled, silicon production efficiency remains high.

  5. Radio-Purification of Neodymium Chloride

    SciTech Connect

    Hans, S.; Yeh, M.; Cumming, J. B.; Hahn, R. L.

    2011-04-27

    Organometallic liquid scintillator becomes one of the man detection mediums for neutrino experiment. Liquid-liquid extraction is the method of choice for loading metallic ions of interest into the organic solvents at BNL. High purity of all starting materials is essential for the optimization of synthesis. A newly developed 'self-scavenging' technique was applied to purify undesired radioisotopes from the starting metal compound and found to effectively remove thorium and such containments from the neodymium chloride for SNO+.

  6. High chloride content calcium silicate glasses.

    PubMed

    Chen, Xiaojing; Karpukhina, Natalia; Brauer, Delia S; Hill, Robert G

    2017-03-08

    Chloride is known to volatilize from silicate glass melts and until now, only a limited number of studies on oxychloride silicate glasses have been reported. In this paper we have synthesized silicate glasses that retain large amounts of CaCl2. The CaCl2 has been added to the calcium metasilicate composition (CaO·SiO2). Glasses were produced via a melt quench route and an average of 70% of the chloride was retained after melting. Up to 31.6 mol% CaCl2 has been successfully incorporated into these silicate glasses without the occurrence of crystallization. (29)Si MAS-NMR spectra showed the silicon being present mainly as a Q(2) silicate species. This suggests that chloride formed Cl-Ca(n) species, rather than Si-Cl bonds. Upon increasing the CaCl2 content, the Tg reduced markedly from 782 °C to 370 °C. Glass density and glass crystallization temperature decreased linearly with an increase in the CaCl2 content. However, both linear regressions revealed a breakpoint at a CaCl2 content just below 20 mol%. This might be attributed to a significant change in the structure and is also correlated with the nature of the crystallizing phases formed upon heat treatment. The glasses with less than 19.2 mol% CaCl2 crystallized to wollastonite, whilst the compositions with CaCl2 content equal to or greater than 19.2 mol% are thought to crystallize to CaCl2. In practice, the crystallization of CaCl2 could not occur until the crystallization temperature fell below the melting point of CaCl2. The implications of the results along with the high chloride retention are discussed.

  7. Inactivation of Viruses by Benzalkonium Chloride

    PubMed Central

    Armstrong, J. A.; Froelich, E. J.

    1964-01-01

    Benzalkonium chloride (as Roccal or Zephiran) was found to inactivate influenza, measles, canine distemper, rabies, fowl laryngotracheitis, vaccinia, Semliki Forest, feline pneumonitis, meningopneumonitis, and herpes simplex viruses after 10 min of exposure at 30 C or at room temperature. Poliovirus and encephalomyocarditis virus were not inactivated under the same conditions. It was concluded that all viruses tested were sensitive except members of the picorna group. The literature was reviewed. PMID:4288740

  8. Mechanistic characterization of chloride interferences in electrothermal atomization systems

    USGS Publications Warehouse

    Shekiro, J.M.; Skogerboe, R.K.; Taylor, H.E.

    1988-01-01

    A computer-controlled spectrometer with a photodiode array detector has been used for wavelength and temperature resolved characterization of the vapor produced by an electrothermal atomizer. The system has been used to study the chloride matrix interference on the atomic absorption spectrometric determination of manganese and copper. The suppression of manganese and copper atom populations by matrix chlorides such as those of calcium and magnesium is due to the gas-phase formation of an analyte chloride species followed by the diffusion of significant fractions of these species from the atom cell prior to completion of the atomization process. The analyte chloride species cannot be formed when matrix chlorides with metal-chloride bond dissociation energies above those of the analyte chlorides are the principal entitles present. The results indicate that multiple wavelength spectrometry used to obtain temperature-resolved spectra is a viable tool in the mechanistic characterization of interference effects observed with electrothermal atomization systems. ?? 1988 American Chemical Society.

  9. Developing Polymer Cathode Material for the Chloride Ion Battery.

    PubMed

    Zhao, Xiangyu; Zhao, Zhigang; Yang, Meng; Xia, Hui; Yu, Tingting; Shen, Xiaodong

    2017-01-25

    The chloride ion battery is an attractive rechargeable battery owing to its high theoretical energy density and sustainable components. An important challenge for research and development of chloride ion batteries lies in the innovation of the cathode materials. Here we report a nanostructured chloride ion-doped polymer, polypyrrole chloride, as a new type of potential cathode material for the chloride ion battery. The as-prepared polypyrrole chloride@carbon nanotubes (PPyCl@CNTs) cathode shows a high reversible capacity of 118 mAh g(-1) and superior cycling stability. Reversible electrochemical reactions of the PPyCl@CNTs cathode based on the redox reactions of nitrogen species and chloride ion transfer are demonstrated. Our work may guide and offer electrode design principles for accelerating the development of rechargeable batteries with anion transfer.

  10. An autopsy case of zinc chloride poisoning.

    PubMed

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death.

  11. Boldine action against the stannous chloride effect.

    PubMed

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS.

  12. Solution-Derived, Chloride-Containing Minerals as a Waste Form for Alkali Chlorides

    SciTech Connect

    Riley, Brian J.; Crum, Jarrod V.; Matyas, Josef; McCloy, John S.; Lepry, William C.

    2012-10-01

    Sodalite [Na8(AlSiO4)6Cl2] and cancrinite [(Na,K)6Ca2Al6Si6O24Cl4] are environmentally stable, chloride-containing minerals and are a logical waste form option for the mixed alkali chloride salt waste stream that is generated from a proposed electrochemical separations process during nuclear fuel reprocessing. Due to the volatility of chloride salts at moderate temperatures, the ideal processing route for these salts is a low-temperature approach such as the sol-gel process. The sodalite structure can be easily synthesized by the sol-gel process; however, it is produced in the form of a fine powder with particle sizes on the order of 1–10 µm. Due to the small particle size, these powders require additional treatment to form a monolith. In this study, the sol-gel powders were pressed into pellets and fired to achieve > 90% of theoretical density. The cancrinite structure, identified as the best candidate mineral form in terms of waste loading capacity, was only produced on a limited basis following the sol-gel process and converted to sodalite upon firing. Here we discuss the sol-gel process specifics, chemical durability of select waste forms, and the steps taken to maximize chloride-containing phases, decrease chloride loss during pellet firing, and increase pellet densities.

  13. Crystal structures of salicylideneguanylhydrazinium chloride and its copper(II) and cobalt(III) chloride complexes

    SciTech Connect

    Chumakov, Yu. M. Tsapkov, V. I.; Bocelli, G.; Antosyak, B. Ya.; Shova, S. G.; Gulea, A. P.

    2006-01-15

    The crystal structures of salicylideneguanylhydrazinium chloride hydrate hemiethanol solvate (I), salicylideneguanylhydrazinium trichloroaquacuprate(II) (II), and bis(salicylideneguanylhydrazino)cobalt(III) chloride trihydrate (III) are determined using X-ray diffraction. The structures of compounds I, II, and III are solved by direct methods and refined using the least-squares procedure in the anisotropic approximation for the non-hydrogen atoms to the final factors R = 0.0597, 0.0212, and 0.0283, respectively. In the structure of compound I, the monoprotonated molecules and chlorine ions linked by hydrogen bonds form layers aligned parallel to the (010) plane. In the structure of compound II, the salicylaldehyde guanylhydrazone cations and polymer chains consisting of trichloroaquacuprate(II) anions are joined by an extended three-dimensional network of hydrogen bonds. In the structure of compound III, the [Co(LH){sub 2}]{sup +} cations, chloride ions, and molecules of crystallization water are linked together by a similar network.

  14. Twenty years of fluorescence imaging of intracellular chloride

    PubMed Central

    Arosio, Daniele; Ratto, Gian Michele

    2014-01-01

    Chloride homeostasis has a pivotal role in controlling neuronal excitability in the adult brain and during development. The intracellular concentration of chloride is regulated by the dynamic equilibrium between passive fluxes through membrane conductances and the active transport mediated by importers and exporters. In cortical neurons, chloride fluxes are coupled to network activity by the opening of the ionotropic GABAA receptors that provides a direct link between the activity of interneurons and chloride fluxes. These molecular mechanisms are not evenly distributed and regulated over the neuron surface and this fact can lead to a compartmentalized control of the intracellular concentration of chloride. The inhibitory drive provided by the activity of the GABAA receptors depends on the direction and strength of the associated currents, which are ultimately dictated by the gradient of chloride, the main charge carrier flowing through the GABAA channel. Thus, the intracellular distribution of chloride determines the local strength of ionotropic inhibition and influences the interaction between converging excitation and inhibition. The importance of chloride regulation is also underlined by its involvement in several brain pathologies, including epilepsy and disorders of the autistic spectra. The full comprehension of the physiological meaning of GABAergic activity on neurons requires the measurement of the spatiotemporal dynamics of chloride fluxes across the membrane. Nowadays, there are several available tools for the task, and both synthetic and genetically encoded indicators have been successfully used for chloride imaging. Here, we will review the available sensors analyzing their properties and outlining desirable future developments. PMID:25221475

  15. The Structure of Nickel Chloride in the Ionic Liquid 1-Ethyl-3-methyl Imidazolium Chloride/Aluminum Chloride: X-ray Absorption Spectroscopy

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    The structure of anhydrous nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride and aluminum chloride has been investigated with extended X-ray absorption fine structure (EXAFS) in both Lewis acid and Lewis base solutions. The EXAFS data of NiCl{sub 2} {center_dot} 6H{sub 2}O crystals were also recorded and analyzed to demonstrate the difference file technique. The difference file technique is used to obtain the structural information for the very closely spaced coordination shells of chloride and oxygen in NiCl{sub 2} {center_dot} 6H{sub 2}O and they are found to agree very closely with the X-ray diffraction data. The difference file technique is then used to analyze the nickel chloride in the ionic liquid solutions. Even though anhydrous NiCl{sub 2} is more soluble in the basic solution than in the acidic solution, the EXAFS data show a single coordination of four chlorides in a tetrahedron around the nickel atom in the basic solution. In a weak acid solution, there are six chlorides in a single octahedral coordination shell around the nickel. However, in a strong acid solution, in addition to the octahedral chloride-coordination shell, there is a second coordination shell of eight aluminum atoms in the form of a simple cube.

  16. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Hyman, M.L.; Savolainen, J.E.

    1960-01-01

    A method is given for dissolving reactor fuel elements in which the uranium is associated with a relatively inert chromium-containing alloy such as stainless steel. An aqueous mixture of acids comprising 2 to 2.5 molar hydrochloric acid and 4 to 8 molar nitric acid is employed in dissolving the fuel element. In order io reduce corrosion in subsequent processing of the resulting solution, chloride values are removed from the solution by contacting it with concentrated nitric acid at an elevated temperature.

  17. Calcium/Thionyl Chloride Battery Technology.

    DTIC Science & Technology

    1985-12-01

    report, with the exception that the cathodes utilized contained one of two additives, copper phthalocyanine or copper dust. The cathodes had either 15...slowly loaded to the 0.48 ohm level. The two cells with cathodes containing copper phthalocyanine at the 15% level achieved fewer amp-hours above 2.0...1. SUBJECT TERMS (CSnina. ong Mwe" ufe .j!wu and Ulorniff b6y ill amai 4LO GROUP SU. on. 10 02 Pover Sources]fateis Calcium, Thionyl Chloride 0 1 03

  18. Solubility of RDX, PETN and Boric Acid in Methylene Chloride

    DTIC Science & Technology

    2010-08-01

    Solubility of RDX, PETN, and Boric Acid in Methylene Chloride by Rose Pesce-Rodriguez ARL-TN-0401 August 2010...of RDX, PETN, and Boric Acid in Methylene Chloride Rose Pesce-Rodriguez Weapons and Materials Research Directorate, ARL...AND SUBTITLE Solubility of RDX, PETN and Boric Acid in Methylene Chloride 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  19. A Review of the Calcium Thionyl Chloride Electrochemical System

    DTIC Science & Technology

    1991-04-01

    the development of new battery chem- istries is the safe use of high-energy systems. The lithium thionyl chloride cell chemistry exhibits high energy... thionyl chloride batteries. When driven into reversal, lithium metal plates at the cathode and can create an internal short circuit. The heat...with Ca 2 + or Sr2+ as the counterion. Upon discharge, the reaction of calcium with thionyl chloride is similar to that of lithium : 2Ca + 2SOC1 2

  20. Localized corrosion of stainless steels in ammonium chloride solutions

    SciTech Connect

    Forsen, O.; Aromaa, J.; Tavi, M.; Virtanen, J.

    1997-05-01

    Ammonium chloride deposition is a well-known problem in oil refining. When these deposits form in a moist environment, they are corrosive to carbon steel. When unexpected corrosion problems are faced, the material is often changed to alloys like stainless steels (SS). Electrochemical measurements were used to study the corrosion resistance of SS in ammonium chloride environments with different chloride contents and at different temperatures.

  1. Investigation of Lithium-Thionyl Chloride Battery Safety Hazards.

    DTIC Science & Technology

    1983-01-01

    LITHIUM - THIONYL CHLORIDE BATTERY SAFETY HAZARDS(U) GOULD RESEARCH CENTER ROLLING MEADOWS IL MATERIALS LAB A I ATTIA ET...838-012 7 ontract No. 60921-81-C-0363 6// Investigation of Lithium - Thionyl Chloride Battery Safety Hazards AD A 1 T 2 , Alan I. Attia Gould Research...REPORT & PERIOD COVERED Investigation of Lithium - Thionyl Chloride Final Report Battery Safety Hazards 9/28/81 - 12/31/82 6. PERFORMING ORG. REPORT

  2. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the plant to be monitored by the vinyl chloride monitoring system. Measurements of background... valves or lines that are demonstrated to require significant retrofit cost to comply with the... method of measurement is to meet the requirements in § 61.67(g)(5)(i)(A) or (g)(5)(i)(B). (d) A RVD...

  3. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hydrocarbons measured are vinyl chloride, with infrared spectrophotometry, flame ion detection, or an... discharged to a wastewater treatment process; or before being discharged untreated as a wastewater. This...)(2). Monitoring for the presence of a flare pilot flame shall be conducted in accordance with §...

  4. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... hydrocarbons measured are vinyl chloride, with infrared spectrophotometry, flame ion detection, or an... discharged to a wastewater treatment process; or before being discharged untreated as a wastewater. This...)(2). Monitoring for the presence of a flare pilot flame shall be conducted in accordance with §...

  5. Toxicity of vinyl chloride and poly(vinyl chloride): a critical review.

    PubMed Central

    Wagoner, J K

    1983-01-01

    In 1974, vinyl chloride (VC) was first reported in the open scientific literature to induce angiosarcoma of the liver both in humans and in animals. Additional research has now demonstrated the carcinogenicity of VC to other organs and at lower concentrations. The target organs for VC now clearly include the liver, brain and the lung, and probably the lymphohematopoietic system. The evidence for a carcinogenic risk has been extended to jobs associated with poly(vinyl chloride) exposure. Cases of liver angiosarcoma have been reported among individuals employed in PVC fabrication facilities and an epidemiological study has demonstrated a significant association between exposure to PVC dust and the risk of lung cancer mortality. Cases of angiosarcoma of the liver also have been reported among individuals living in near proximity to vinyl chloride-poly(vinyl chloride) plants. An association between PVC dust and pneumoconiosis also has been demonstrated. On the basis of findings, prudent control of PVC dust in the industrial setting is indicated. PMID:6360677

  6. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... be used as a “check” on the required closed gauge, nor as a means or sampling. (h) The words “CANCER... legend: cancer—suspect agent in this area protective equipment required authorized personnel only must be... clean and dry for each use, to prevent skin contact with liquid vinyl chloride....

  7. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... be used as a “check” on the required closed gauge, nor as a means or sampling. (h) The words “CANCER... legend: cancer—suspect agent in this area protective equipment required authorized personnel only must be... clean and dry for each use, to prevent skin contact with liquid vinyl chloride....

  8. Anodic Behavior of Alloy 22 in Calcium Chloride and in Calcium Chloride Plus Calcium Nitrate Brines

    SciTech Connect

    Evans, K J; Day, S D; Ilevbare, G O; Whalen, M T; King, K J; Hust, G A; Wong, L L; Estill, J C; Rebak, R B

    2003-05-13

    Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this work was to characterize the anodic behavior of Alloy 22 in concentrated calcium chloride (CaCl{sub 2}) brines and to evaluate the inhibitive effect of nitrate, especially to localized corrosion. Standard electrochemical tests such as polarization resistance and cyclic polarization were used. Results show that the corrosion potential of Alloy 22 was approximately -360 mV in the silver-silver chloride (SSC) scale and independent of the tested temperature. Cyclic polarization tests showed that Alloy 22 was mainly susceptible to localized attack in 5 M CaCl{sub 2} at 75 C and higher temperatures. The addition of nitrate in a molar ratio of chloride to nitrate equal to 10 increased the onset of localized corrosion to approximately 105 C. The addition of nitrate to the solution also decreased the uniform corrosion rate and the passive current of the alloy.

  9. On Barium Oxide Solubility in Barium-Containing Chloride Melts

    NASA Astrophysics Data System (ADS)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V.

    2016-08-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl2-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl2-MCl systems.

  10. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    PubMed

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time.

  11. 21 CFR 522.1862 - Sterile pralidoxime chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... Before administration of the sterile pralidoxime chloride, atropine is administered intravenously at a... milligram of atropine per pound of body weight administered intramuscularly. Then the appropriate dosage...

  12. VOLATILE CHLORIDE PROCESS FOR THE RECOVERY OF METAL VALUES

    DOEpatents

    Hanley, W.R.

    1959-01-01

    A process is presented for recovering uranium, iron, and aluminum from centain shale type ores which contain uranium in minute quantities. The ore is heated wiih a chlorinating agent. such as chlorine, to form a volatilized stream of metal chlorides. The chloride stream is then passed through granular alumina which preferentially absorbs the volatile uranium chloride and from which the uranium may later be recovered. The remaining volatilized chlorides, chiefly those of iron and aluminum, are further treated to recover chlorine gas for recycle, and to recover ferric oxide and aluminum oxide as valuable by-products.

  13. Chloride influx provokes lamellipodium formation in microglial cells.

    PubMed

    Zierler, Susanna; Frei, Eva; Grissmer, Stephan; Kerschbaum, Hubert H

    2008-01-01

    Lamellipodium extension and retraction is the driving force for cell migration. Although several studies document that activation of chloride channels are essential in cell migration, little is known about their contribution in lamellipodium formation. To address this question, we characterized chloride channels and transporters by whole cell recording and RT-PCR, respectively, as well as quantified lamellipodium formation in murine primary microglial cells as well as the microglial cell-line, BV-2, using time-lapse microscopy. The repertoire of chloride conducting pathways in BV-2 cells included, swelling-activated chloride channels as well as the KCl cotransporters, KCC1, KCC2, KCC3, and KCC4. Swelling-activated chloride channels were either activated by a hypoosmotic solution or by a high KCl saline, which promotes K(+) and Cl(-) influx instead of efflux by KCCs. Conductance through swelling-activated chloride channels was completely blocked by flufenamic acid (200 microM), SITS (1 mM) and DIOA (10 microM). By exposing primary microglial cells or BV-2 cells to a high KCl saline, we observed a local swelling, which developed into a prominent lamellipodium. Blockade of chloride influx by flufenamic acid (200 microM) or DIOA (10 microM) as well as incubation of cells in a chloride-free high K(+) saline suppressed formation of a lamellipodium. We assume that local swellings, established by an increase in chloride influx, are a general principle in formation of lamellipodia in eukaryotic cells.

  14. Structural/Functional Role of Chloride in Photosystem II

    PubMed Central

    Rivalta, Ivan; Amin, Muhamed; Luber, Sandra; Vassiliev, Serguei; Pokhrel, Ravi; Umena, Yasufumi; Kawakami, Keisuke; Shen, Jian-Ren; Kamiya, Nobuo; Bruce, Doug; Brudvig, Gary W.; Gunner, M. R.; Batista, Victor S.

    2011-01-01

    Chloride binding in photosystem II (PSII) is essential for photosynthetic water oxidation. However, the functional roles of chloride and possible binding sites, during oxygen evolution, remain controversial. This paper examines the functions of chloride based on its binding site revealed in the X-ray crystal structure of PSII at 1.9 Å resolution. We find that chloride depletion induces formation of a salt-bridge between D2-K317 and D1-D61 that could suppress proton transfer to the lumen. PMID:21678923

  15. Identification of benzalkonium chloride in commercial grapefruit seed extracts.

    PubMed

    Takeoka, Gary R; Dao, Lan T; Wong, Rosalind Y; Harden, Leslie A

    2005-09-21

    Commercial grapefruit seed extracts (GSE) were extracted with chloroform. The solvent was evaporated, and the resulting solid was subsequently analyzed by high-performance liquid chromatography (HPLC), electrospray ionization mass spectrometry (ESI/MS), tandem mass spectrometry (ESI/MS/MS), and elemental analysis (by proton-induced X-ray emission analysis). Three major constituents were observed by HPLC and were identified as benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, and benzyldimethylhexadecylammonium chloride. This mixture of homologues is commonly known as benzalkonium chloride, a widely used synthetic antimicrobial ingredient used in cleaning and disinfection agents.

  16. Purification of aqueous plutonium chloride solutions via precipitation and washing.

    SciTech Connect

    Stroud, M. A.; Salazar, R. R.; Abney, Kent David; Bluhm, E. A.; Danis, J. A.

    2003-01-01

    Pyrochemical operations at Los Alamos Plutonium Facility (TA-55) use high temperature melt s of calcium chloride for the reduction of plutonium oxide to plutonium metal and hi gh temperature combined melts of sodium chloride and potassium chloride mixtures for the electrorefining purification of plutonium metal . The remaining plutonium and americium are recovered from thes e salts by dissolution in concentrated hydrochloric acid followed by either solvent extraction or io n exchange for isolation and ultimately converted to oxide after precipitation with oxalic acid . Figur e 1 illustrates the current aqueous chloride flow sheet used for plutonium processing at TA-55 .

  17. Protective effect of zinc chloride against cobalt chloride-induced cytotoxicity on vero cells: preliminary results.

    PubMed

    Gürbay, Aylin

    2012-07-01

    The aim of this study was to investigate the possible time- and dose-dependent cytotoxic effects of cobalt chloride on Vero cells. The cultured cells were incubated with different concentrations of cobalt chloride ranging from 0.5 to 1,000 μM, and cytotoxicity was determined by 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) and resazurin assays. Possible protective effects of vitamin E, coenzyme Q(10), and zinc chloride were also tested in this system. A gradual decrease in cell proliferation was observed at concentrations ~≥ 200 μM in incubation periods of 24, 48, 72, and 96 h with MTT assay. Exposure of cells to 500 and 1,000 μM cobalt chloride caused significant decrease in cell survival. A biphasic survival profile of cells was observed at 1-25 μM concentration range following 96 h of incubation. With resazurin assay, cytotoxicity profile of CoCl(2) was found comparable to the results of MTT assay, particularly at high concentrations and long incubation periods. Dose-dependent cytotoxicity was noted following exposure of cells to ≥ 250 μM of CoCl(2) for 24 h and ≥ 100 μM concentrations of CoCl(2) for 48-96 h. Pretreatment of cells with ZnCl(2) for 4 or 24 h provided significant protection against cobalt chloride-induced cytotoxicity when measured with MTT assay. However, vitamin E or coenzyme Q(10) was not protective. CoCl(2) had dose- and time-dependent cytotoxic effects in Vero cells. Preventive effect of ZnCl(2) against CoCl(2)-induced cytotoxicity should be considered in detail to define exact mechanism of toxicity in Vero cells.

  18. Regulated trafficking of the CFTR chloride channel.

    PubMed

    Kleizen, B; Braakman, I; de Jonge, H R

    2000-08-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Whereas a key role of cAMP-dependent phosphorylation in CFTR-channel gating has been firmly established, more recent studies have provided clear evidence for the existence of a second level of cAMP regulation, i.e. the exocytotic recruitment of CFFR to the plasma membrane and its endocytotic retrieval. Regulated trafficking of the CFTR Cl- channel has sofar been demonstrated only in a subset of CFTR-expressing cell types. However, with the introduction of more sensitive methods to measure CFTR cycling and submembrane localization, it might turn out to be a more general phenomenon that could contribute importantly to both the regulation of CFTR-mediated chloride transport itself and to the regulation of other transporters and CFTR-modulated cellular functions. This review aims to summarize the present state of knowledge regarding polarized and regulated CFTR trafficking and endosomal recycling in epithelial cells, to discuss present gaps in our understanding of these processes at the cellular and molecular level, and to consider its possible implications for cystic fibrosis.

  19. Picosecond dynamics from lanthanide chloride melts

    NASA Astrophysics Data System (ADS)

    Kalampounias, Angelos G.

    2012-12-01

    The picosecond dynamics of molten lanthanide chlorides is studied by means of vibrational spectroscopy. Polarized Raman spectra of molten LaCl3, NdCl3, GdCl3, DyCl3, HoCl3 and YCl3 are fitted to a model enabling to obtain the times of vibrational dephasing, tν and vibrational frequency modulation tω. Our aim is to find possible sensitive indicators of short-time dynamics. It has been found that all lanthanide chlorides exhibit qualitative similarities in the vibrational relaxation and frequency modulation times in the molten state. It appears that the vibrational correlation functions of all melts comply with the Rothschild approach assuming that the environmental modulation is described by a stretched exponential decay. The evolution of the dispersion parameter α indicates the deviation of the melts from the model simple liquid and the similar local environment in which the oscillator is placed and with which it is coupled. The "packing" of the anions around central La3+ cation seems to be the key factor for the structure and the dynamics of the melts. The results are discussed in the framework of the current phenomenological status of the field.

  20. Enrofloxacin hydro­chloride dihydrate

    PubMed Central

    Miranda-Calderón, Jorge E.; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-01-01

    The asymmetric unit of the title compound, C19H23FN3O3 +·Cl−·2H2O [systematic name: 4-(3-carb­oxy-1-cyclo­propyl-6-fluoro-4-oxo-1,4-di­hydro­quin­o­lin-7-yl)-1-ethyl­piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol­ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo­propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra­molecular O—H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O—H⋯Cl, N—H⋯Cl and O—H⋯O hydrogen bonds, and a π–π inter­action between the benzene rings [centroid–centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array. PMID:24826167