Science.gov

Sample records for 1-butyl-3-methylimidazolium tetrafluoroborate c4mimbf4

  1. Acute toxicity, biochemical toxicity and genotoxicity caused by 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium tetrafluoroborate in zebrafish (Danio rerio) livers.

    PubMed

    Zhang, Cheng; Shao, Yuting; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Guo, Yingying

    2017-02-21

    The present study examined the potential toxicity of 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3- methylimidazolium tetrafluoroborate ([Bmim]BF4) in the liver cells of zebrafish (Danio rerio) with different doses (20-160mg/L) on 7 and 14days. The effects of [Bmim]Cl and [Bmim]BF4 on acute toxicity, reactive oxygen species (ROS), antioxidant enzymes, glutathione S-transferase (GST), malondialdehyde (MDA), and DNA damage degree in livers of zebrafish were determined. The 50% lethal concentration (LC50) values after a 96-h exposure to [Bmim]Cl and [Bmim]BF4 were 632.8±67.4 and 604.6±56.2mg/L, respectively, which indicated that the substances were practically harmless. The minor discrepancy may be caused by the different anions. The ROS levels were dose-dependent, which may cause the inhibition of antioxidant enzyme activity, lipid peroxidation, DNA damage and the stimulation of detoxifying enzyme activity. The present study can also provide scientific support for the future selection and evaluation of ionic liquids (ILs).

  2. Asymmetric criticality of binary ionic solutions containing 1-butyl-3-methylimidazolium tetrafluoroborate and alcohol.

    PubMed

    Yin, Tianxiang; Xu, Chen; Lv, Hekun; Liu, Shixia; Wang, Mingjie; Chen, Zhiyun; Shen, Weiguo

    2014-09-07

    The liquid-liquid coexistence curves for binary solutions {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 1-propanol} and {1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) + 2-propanol} have been precisely measured. The values of the critical exponents β obtained from the liquid-liquid equilibrium data in the critical region confirmed the 3D-Ising universality. The isobaric heat capacities per unit volume were measured for {[C4mim][BF4] + 1-propanol (or 2-propanol, 1,3-propanediol, 1,4-butanediol)} in both critical and non-critical regions. The experimental results indicate a major solvophobic contribution to the criticality for the studied ionic solutions. The complete scaling theory was applied to well represent the asymmetric behavior of the diameter of the coexistence curves with the consideration of the heat capacity contribution. It was found that the contribution of the heat capacity related term in the ionic solution decreased with the increase of the permittivity of alcohol and was more important in the description of the asymmetry of the coexistence curve of the ionic solutions than that of the molecular solutions.

  3. FE-SEM observation of swelled seaweed using hydrophilic ionic liquid; 1-butyl-3-methylimidazolium tetrafluoroborate.

    PubMed

    Takahashi, Chisato; Shirai, Takashi; Fuji, Masayoshi

    2013-01-01

    The method to observe the exact morphology of swelled seaweed as an example of biological material by field emission scanning electron microscopy (FE-SEM) with the aid of hydrophilic ionic liquid (IL); 1-butyl-3-methylimidazolium tetrafluoroborate is reported. Seaweed was first swelled in 3.5% NaCl solution and then treated with the IL and water mixture in 1:7 weight ratios and centrifuged to remove the excess IL solution. Thus treated seaweed maintained its morphology even at high magnification and did not show drying in the FE-SEM chamber. This observation technique might be useful for various kinds of biological materials to be observed under FE-SEM.

  4. Electrical conductivity and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

    NASA Astrophysics Data System (ADS)

    Sangoro, J.; Iacob, C.; Serghei, A.; Naumov, S.; Galvosas, P.; Kärger, J.; Wespe, C.; Bordusa, F.; Stoppa, A.; Hunger, J.; Buchner, R.; Kremer, F.

    2008-06-01

    Broadband dielectric and terahertz spectroscopy (10-2-10+12 Hz) are combined with pulsed field gradient nuclear magnetic resonance (PFG-NMR) to explore charge transport and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. The dielectric spectra are interpreted as superposition of high-frequency relaxation processes associated with dipolar librations and a conductivity contribution. The latter originates from hopping of charge carriers on a random spatially varying potential landscape and quantitatively fits the observed frequency and temperature dependence of the spectra. A further analysis delivers the hopping rate and enables one to deduce-using the Einstein-Smoluchowski equation-the translational diffusion coefficient of the charge carriers in quantitative agreement with PFG-NMR measurements. By that, the mobility is determined and separated from the charge carrier density; for the former, a Vogel-Fulcher-Tammann and for the latter, an Arrhenius temperature dependence is obtained. There is no indication of a mode arising from the reorientation of stable ion pairs.

  5. Multiprobe Spectroscopic Inverstigation of Molecular-level Behavior within Aqueous 1-Butyl-3-methylimidazolium Tetrafluoroborate

    SciTech Connect

    Sarkar, Abhra; Ali, Maroof; Baker, Gary A; Tetin, Sergey Y.; Ruan, Qiaoqiao; Pandey, Siddharth

    2009-01-01

    In this work, an array of molecular-level solvent featuressincluding solute-solvent/solvent-solvent interactions, dipolarity, heterogeneity, dynamics, probe accessibility, and diffusionswere investigated across the entire composition of ambient mixtures containing the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4], and pH 7.0 phosphate buffer, based on results assembled for nine different molecular probes utilized in a range of spectroscopic modes. These studies uncovered interesting and unusual solvatochromic probe behavior within this benchmark mixture. Solvatochromic absorbance probessa watersoluble betaine dye (betaine dye 33), N,N-diethyl-4-nitroaniline, and 4-nitroanilineswere employed to determine ET (a blend of dipolarity/polarizability and hydrogen bond donor contributions) and the Kamlet-Taft indices * (dipolarity/polarizability), R (hydrogen bond donor acidity), and (hydrogen bond acceptor basicity) characterizing the [bmim][BF4] + phosphate buffer system. These parameters each showed a marked deviation from ideality, suggesting selective solvation of the individual probe solutes by [bmim][BF4]. Similar conclusions were derived from the responses of the fluorescent polarity-sensitive probes pyrene and pyrene-1-carboxaldehyde. Importantly, the fluorescent microfluidity probe 1,3-bis(1-pyrenyl)propane senses a microviscosity within the mixture that significantly exceeds expectations derived from simple interpolation of the behavior in the neat solvents. On the basis of results from this probe, a correlation between microviscosity and bulk viscosity was established; pronounced solvent-solvent hydrogen-bonding interactions were implicit in this behavior. The greatest deviation from ideal additive behavior for the probes studied herein was consistently observed to occur in the buffer-rich regime. Nitromethane-based fluorescence quenching of pyrene within the [bmim][BF4] + phosphate buffer system showed unusual compliance with a sphere

  6. Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Zhang, Jin; Xu, Hongyan; Zhao, Xueyan; Zheng, Liqiang; Li, Xinwei; Yu, Li

    2006-07-17

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.

  7. Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

    NASA Astrophysics Data System (ADS)

    Li, Junchun; Zhang, Jianling; Han, Buxing; Wang, Yong; Gao, Liang

    2004-10-01

    We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.

  8. The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Zhao, Xueyan; Zhang, Jin; Cao, Quan; Zhao, Mingwei; Li, Zhen; Zhang, Gaoyong

    2007-01-01

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.

  9. Role of solubilized water in the reverse ionic liquid microemulsion of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene.

    PubMed

    Gao, Yan'an; Li, Na; Zheng, Liqiang; Bai, Xiangtao; Yu, Li; Zhao, Xueyan; Zhang, Jin; Zhao, Mingwei; Li, Zhen

    2007-03-15

    The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) can form nonaqueous microemulsions with benzene by the aid of nonionic surfactant TX-100. The effect of water on ionic liquid-in-oil (IL/O) microemulsions was studied, and it was shown that the addition of small amount of water to the IL microemulsion contributed to the stability of microemulsion and thus increased the amount of solubilized bmimBF4 in the microemulsion. The conductivity measurements also showed that the attractive interactions between IL microdroplets were weakened, that is, the IL/O microemulsion becomes more stable in the present of some water. Fourier transform IR was carried out to analyze the states of the added water, and the result showed that these water molecules mainly behaved as bound water and trapped water, indicating that the water molecules are located in the palisade layers of the IL/O microemulsion. Furthermore, 1H NMR and 19F NMR spectra suggested that the added water molecules built the hydrogen binding network of imidazolium cations and H2O, BF4- anion and H2O, and at the same time the electronegative oxygen atoms of the oxyethylene units of TX-100 and water in the palisade layers, which made the palisade layers more firm and thus increased the stability of the microemulsion. The study can help in further understanding the formation mechanism of microemulsions. In addition, the characteristic solubilization behavior of the added water can provide an aqueous interface film for hydrolysis reactions and therefore may be used as an ideal medium to prepare porous or hollow nanomaterials.

  10. States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

    PubMed

    Li, Na; Cao, Quan; Gao, Yanan; Zhang, Jin; Zheng, Liqiang; Bai, Xiangtao; Dong, Bin; Li, Zhen; Zhao, Mingwei; Yu, Li

    2007-10-22

    We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions.

  11. Application of the Bahe's pseudolattice-theory to water-1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures at 298.15K Part I. Autoprotolysis constants.

    PubMed

    Bou Malham, I; Letellier, P; Turmine, M

    2007-04-15

    The autoprotolysis constants (K(s)) of water - 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) mixtures were determined at 298K over the composition range of 0 to 77.43vol.% bmimBF(4) using potentiometric method with a glass electrode. A slight increase in the autoprotolysis constant was observed when the salt was added to the water. The value of the ionic product of the medium then decreases as the bmimBF(4) content increases from about 20vol.%. The acid-base properties of these media were perfectly described by Bahe's approaches that were completed by Varela et al. concerning structured electrolyte solutions with large short-range interactions.

  12. A novel, sensitive, reusable and low potential acetylcholinesterase biosensor for chlorpyrifos based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotubes gel.

    PubMed

    Zamfir, Lucian-Gabriel; Rotariu, Lucian; Bala, Camelia

    2011-04-15

    A novel, low potential and highly sensitive acetylcholinesterase (AChE) biosensor was developed based on 1-butyl-3-methylimidazolium tetrafluoroborate/multiwalled carbon nanotube composite gel thiocholine sensor. Composite gel promoted electron transfer reaction at a lower potential (+50 mV) and catalyzed electrochemical oxidation of thiocholine with high sensitivity. AChE was immobilized in sol-gel matrix that provides a good support for enzyme without any inhibition effect from the ionic liquid. The amount of immobilized enzyme and incubation time with chlorpyrifos were optimized. Chlorpyrifos could be determined in the range of 10(-8)-10(-6)M with a detection limit of 4 nM. Fast and efficient enzyme reactivation was obtained at low obidoxime concentration (0.1mM). Moreover, the biosensor exhibited a good stability and reproducibility and could be use for multiple determinations of pesticide with no loss of the enzyme activity.

  13. 1-Butyl-3-Methylimidazolium Tetrafluoroborate Film as a Highly Selective Sensing Material for Non-Invasive Detection of Acetone Using a Quartz Crystal Microbalance

    PubMed Central

    Tao, Wenyan; Lin, Peng; Liu, Sili; Xie, Qingji; Ke, Shanming; Zeng, Xierong

    2017-01-01

    Breath acetone serves as a biomarker for diabetes. This article reports 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), a type of room temperature ionic liquid (RTIL), as a selective sensing material for acetone. The RTIL sensing layer was coated on a quartz crystal microbalance (QCM) for detection. The sensing mechanism is based on a decrease in viscosity and density of the [bmim][BF4] film due to the solubilization of acetone leading to a positive frequency shift in the QCM. Acetone was detected with a linear range from 7.05 to 750 ppmv. Sensitivity and limit of detection were found to be 3.49 Hz/ppmv and 5.0 ppmv, respectively. The [bmim][BF4]-modified QCM sensor demonstrated anti-interference ability to commonly found volatile organic compounds in breath, e.g., isoprene, 1,2-pentadiene, d-limonene, and dl-limonene. This technology is useful for applications in non-invasive early diabetic diagnosis. PMID:28117697

  14. Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water.

    PubMed

    Gao, Yanan; Hilfert, Liane; Voigt, Andreas; Sundmacher, Kai

    2008-03-27

    In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.

  15. Dielectric relaxation and solvation dynamics in a prototypical ionic liquid + dipolar protic liquid mixture: 1-butyl-3-methylimidazolium tetrafluoroborate + water.

    PubMed

    Zhang, Xin-Xing; Liang, Min; Hunger, Johannes; Buchner, Richard; Maroncelli, Mark

    2013-12-12

    Dielectric and solvation data on mixtures of 1-butyl-3-methylimidazilium tetrafluoroborate ([Im41][BF4]) + water are reported and used to examine the utility of dielectric solvation models. Dielectric permittivity and loss spectra (25 °C) were recorded over the frequency range 200 MHz to 89 GHz at 17 compositions and fit to a 4-Debye form. Dynamic Stokes shift measurements on the solute coumarin 153 (C153), made by combining fluorescence upconversion (80 fs resolution) and time-correlated single photon counting data (20 ns range), were used to determine the solvation response at 7 compositions (20.5 °C). All properties measured here were found to depend upon mixture composition in a simple continuous manner, especially when viewed in terms of volume fraction. Solvation response functions predicted by a simple dielectric continuum model are similar to but ∼7-fold faster than the spectral response functions measured with C153. The solvation data are in better agreement with the recently published predictions of a semimolecular model of Biswas and co-workers [J. Phys. Chem. B 2011, 115, 4011], but these latter predictions are systematically slow by a factor of ∼3.

  16. Solvent and rotational relaxation of coumarin-153 and coumarin-480 in ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) modified sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) micelle

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Banerjee, Chiranjib; Mandal, Sarthak; Ghosh, Surajit; Sarkar, Nilmoni

    2013-02-01

    Understanding ion transport dynamics, structure of surfactant aggregates in ionic liquids or ionic liquid/water solutions are quite interesting and potentially important due to widespread applications of surfactant-based systems. In this manuscript we have investigated the effect of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) addition on solvent and rotational relaxation of coumarin-153 (C-153) and coumarin-480 (C-480) in aqueous solution of sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (NaAOT) using steady state and picosecond time resolved fluorescence spectroscopy. The strong adsorption of the bmim+ at the interface and the role of the ionic liquid particularly the cation bmim+ in the modification of the interfacial geometry were probed by the analysis of decay parameters and the rotational relaxation parameters. Since the addition of the NaAOT in water-bmimBF4 mixture above critical micellar concentration (48 mM, obtained from observing pyrene fluorescence) causes strong adsorption of the ionic liquid particularly the cation bmim+, the average solvation time, particularly the slow component increases significantly. More importantly we have found the probe dependent solvation dynamics due to the different location of the probe molecules, C-153 and C-480. C-153 being hydrophobic in nature resides in the stern layer and the adsorption of the bmim+ at the interface modifies stern layer more effectively. So we have observed more pronounced change in solvation dynamics in case of C-153 compared to that in case of C-480. The fluorescence anisotropy decays of the probe molecules were found to be biexponential in nature. The anisotropy decay was interpreted by using a model which consists of the wobbling (rotational) and translational diffusion of the dye coupled with the rotational motion of the micelle as a whole.

  17. TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

    PubMed

    Gao, Yanan; Han, Shuaibing; Han, Buxing; Li, Ganzuo; Shen, Dong; Li, Zhonghao; Du, Jimin; Hou, Wanguo; Zhang, Gaoyong

    2005-06-21

    Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C. The water-in-bmimPF6, bicontinuous, and bmimPF6-in-water microregions of the microemulsions were identified by cyclic voltammetry method using potassium ferrocyanide K4Fe(CN)6 as the electroactive probe. Dynamic light scattering (DLS) and the UV-vis method were used to characterize the microemulsions. It was demonstrated that the hydrodynamic diameter (Dh) of the bmimPF6-in-water microemulsions is nearly independent of the water content but increases with increasing bmimPF6 content due to the swelling of the micelles by the ionic liquid. The UV-vis further confirmed the existence of water domains in the water-in-bmimPF6 microemulsions, and the salt potassium ferricyanide K3Fe(CN)6 could be dissolved in the water domains.

  18. Characterization of cellulose II nanoparticles regenerated from ionic liquid, 1-butyl-3-methylimidazolium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Regenerated cellulose nanoparticles (RCNs) including both elongated fiber and spherical structures were prepared from microcrystalline cellulose (MCC)and cotton using 1-butyl-3-methylimidazolium chloride followed by high-pressure homogenization. The crystalline structure of RCNs was cellulose II in ...

  19. MICROWAVE-ASSISTED PREPARATION OF 1-BUTYL-3-METHYLIMIDAZOLIUM TETRACHLOROGALLATE AND ITS CATALYTIC USE IN ACETAL FORMATION UNDER MILD CONDITIONS

    EPA Science Inventory

    1-Butyl-3-methylimidazolium tetrachlorogallate, [bmim][GaCl4], prepared via microwave-assisted protocol, is found to be an active catalyst for the efficient acetalization of aldehydes under mild conditions.

  20. Phase behavior and microstructure of microemulsions containing the hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate.

    PubMed

    Anjum, Nishat; Guedeau-Boudeville, Marie-Alice; Stubenrauch, Cosima; Mourchid, Ahmed

    2009-01-08

    The phase behavior and microstructure of the ternary system water/1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6))/Triton X-100 was studied as a function of temperature and ionic liquid (IL) mass fraction alpha. In the present study, a hydrophobic IL instead of commonly used organic solvents such as n-alkanes is used. The fish-shaped region is distorted at low and high values of alpha, whereas it is symmetric at intermediate alpha. With increasing alpha, the extension of the three-phase region decreases regarding the surfactant concentration range, whereas it increases regarding the temperature range. For comparison the phase behavior of two ternary water/bmimPF(6)/alkyl oligoethyleneoxide (C(i)E(j)) systems has been investigated. Our results are compared with those obtained for water/n-alkane/C(i)E(j) and IL/n-alkane/C(i)E(j) systems, respectively.

  1. Green polymer electrolytes based on chitosan and 1-butyl-3-methylimidazolium acetate

    SciTech Connect

    Shamsudin, Intan Juliana; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2014-09-03

    Green polymer electrolytes based on chitosan as the polymer matrix and ionic liquid 1-butyl-3-methylimidazolium acetate [Bmim][OAc] as charge carriers were prepared by solution casting technique. Complexes with various amount of ionic liquid loading were investigated as possible ionic conducting polymers. The ionic conductivity was found to increase with increasing weight percent of ionic liquid. The highest ionic conductivity of the charged chitosan-[Bmim][OAc] was 2.44 × 10{sup −3} S cm{sup −1} at 90 wt.% of [Bmim][OAc] content at ambient temperature. Attenuated Total Reflection Fourier Transform infrared (ATR-FTIR) spectroscopy has proven the interaction between chitosan and [Bmim][OAc]. X-ray Diffraction (XRD) has shown that the amorphosity of the complexes increase as the amount of [Bmim][OAc] increase.

  2. Radiation effects on microcrystalline cellulose in 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    Hao, Yan; Peng, Jing; Ao, Yinyong; Li, Jiuqiang; Zhai, Maolin

    2012-11-06

    The radiation processing of cellulose in ionic liquids (ILs) demands a comprehensive knowledge of radiation effects on cellulose in ILs. Herein, gamma radiation-induced degradation kinetics of microcrystalline cellulose (MCC) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was studied by viscometry. The intrinsic viscosity of MCC in [Bmim]Cl decreased slightly with increasing dose; while chemical structure and crystalline state of cellulose has no obvious change up to 300 kGy. The radiation degradation rate constant (k) of MCC in [Bmim]Cl was 2.60×10(-7)/kGy, lower than that of solid cellulose, but higher than that in N-methylmorpholine-N-oxide (NMMO) solvent. Furthermore, k value decreased to 1.12×10(-7)/kGy in dimethyl sulfoxide (DMSO)/[Bmim]Cl system due to the free radicals scavenging of DMSO. The radicals generated during irradiation play main role in the radiation degradation of MCC in [Bmim]Cl. This work provides a new way to control the average molecular weight of cellulose by radiation-induced degradation of cellulose in ILs.

  3. Synthesis, characterization, and application of 1-butyl-3-methylimidazolium thiocyanate for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Wasewar, Kailas L; Varma, Mahesh N; Shende, Diwakar Z

    2016-05-01

    1-Butyl-3-methylimidazolium thiocyanate [BMIM]SCN has been presented on extractive desulfurization of liquid fuel. The FTIR, (1)H-NMR, and C-NMR have been discussed for the molecular confirmation of synthesized [BMIM]SCN. Further, thermal, conductivity, moisture content, viscosity, and solubility analyses of [BMIM]SCN were carried out. The effects of time, temperature, sulfur compounds, ultrasonication, and recycling of [BMIM]SCN on removal of dibenzothiophene from liquid fuel were also investigated. In extractive desulfurization, removal of dibenzothiophene in n-dodecane was 86.5 % for mass ratio of 1:1 in 30 min at 30 °C under the mild process conditions. [BMIM]SCN could be reused five times without a significant decrease in activity. Also, in the desulfurization of real fuels, multistage extraction was examined. The data and results provided in the present paper explore the significant insights of imidazolium-based ionic liquids as novel extractant for extractive desulfurization of liquid fuels.

  4. Surfactant-free microemulsions of 1-butyl-3-methylimidazolium hexafluorophosphate, propylamine nitrate, and water.

    PubMed

    Xu, Jie; Deng, Huanhuan; Fu, Yunlei; Chen, Yuquan; Zhang, Jing; Hou, Wanguo

    2017-03-08

    Generally, surfactants (or amphiphiles) are believed to be necessary components of microemulsions. However, it has been demonstrated that, in the absence of traditional surfactants, microemulsions can also form from a ternary system of two immiscible fluids (i.e., oil and water phases) and an amphi-solvent, but the current understanding of such surfactant-free microemulsions (SFMEs) is very limited. Herein, we report an SFME consisting of the hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), the protic IL propylamine nitrate (PAN), and water, in which bmimPF6 and PAN are used as the oil phase and the amphi-solvent, respectively. The microstructures and structural transitions of the SFME were investigated using cyclic voltammetry, fluorescence spectroscopy, and ultraviolet-visible spectroscopy. The SFME exhibited water-in-bmimPF6 (W/IL), bicontinuous (BC), and bmimPF6-in-water (IL/W) microstructures, depending on the composition of the ternary system, similar to the case of traditional surfactant-based microemulsions (SBMEs). The three kinds of microstructures were confirmed by cryogenic transmission electron microscopy (cryo-TEM) observations. To the best of our knowledge, this is the first report on SFMEs composed of two ILs as components, especially where one is used as the amphi-solvent.

  5. Highly ordered cellulose II crystalline regenerated from cellulose hydrolyzed by 1-butyl-3-methylimidazolium chloride.

    PubMed

    Ahn, Yongjun; Song, Younghan; Kwak, Seung-Yeop; Kim, Hyungsup

    2016-02-10

    This research focused on the preparation of highly ordered cellulose II crystalline by cellulose hydrolysis in ionic liquid, and the influence of molecular mobility on recrystallization of cellulose. The molar mass of cellulose was controlled by hydrolysis using 1-butyl-3-methylimidazolium chloride (BmimCl). The molecular mobility of cellulose dissolved in BmimCl was characterized by rheological properties. After characterization of cellulose solution and regeneration, change of molar mass and conversion to crystalline were monitored using gel-permeation chromatography and powder X-ray diffraction, respectively. The molar mass of the cellulose in BmimCl was remarkably decreased with an increase in duration time, resulting in better mobility and a lower conformational constraint below critical molar mass. The decrease in molar mass surprisingly increased the crystallinity up to ∼ 85%, suggesting a recrystallization rate dependence of the mobility. The correlation between the mobility and recrystallization rate represented quit different behavior above and below a critical molar mass, which strongly demonstrated to the effect of mobility on the conversion of amorphous state to crystalline structure.

  6. Understanding the dissolution of cellulose in 1-butyl-3-methylimidazolium acetate+DMAc solvent.

    PubMed

    Xu, Airong; Guo, Xin; Xu, Rui

    2015-11-01

    Cellulose solvent ([C4mim][CH3COO]/DMAc) could be obtained by adding N,N-dimethylacetamide (DMAc) in 1-butyl-3-methylimidazolium acetate ([C4mim][CH3COO]). The solubilities of cellulose in [C4mim][CH3COO]/DMAc solvents were determined at 25°C. The effects of molar ratio of DMAc to [C4mim][CH3COO] on cellulose solubility and the possible dissolution mechanism of cellulose in [C4mim][CH3COO]/DMAc solvent have been studied. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). It was found that, cellulose was more readily dissolved in [C4mim][CH3COO]/DMAc solvent than in a neat [C4mim][CH3COO], which mainly attributed to the increased "free" [CH3COO](-) anions and [C4mim](+) cations which result from the dissociation of [C4mim][CH3COO] by DMAc. Moreover, the regenerated cellulose from [C4mim][CH3COO]/DMAc solvent displayed good thermostability and similar molecular structure to the original cellulose.

  7. Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

    SciTech Connect

    Baker, Gary A; Heller, William T

    2009-01-01

    As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

  8. Simultaneous separation of basic and acidic proteins using 1-butyl-3-methylimidazolium-based ion liquid as dynamic coating and background electrolyte in capillary electrophoresis.

    PubMed

    Wu, Xiaoping; Wei, Weiping; Su, Qingmei; Xu, Liangjun; Chen, Guonan

    2008-06-01

    1-Butyl-3-methylimidazolium tetrafluoroborate ionic liquids (1B-3MI-TFB ILs) were employed as a coating material and BGE in CE for simultaneous separation of basic and acidic proteins such as lysozyme, cytochrome C, ribonuclease A, albumin, and alpha-lactalbumin. 1B-3MI-TFB ILs effectively reversed the surface charges on the capillary inner surface, preventing the adsorption of positively charged proteins onto the silica surface, as well as associated with proteins, thus benefiting the separation efficiencies and reproducibility. Consequently, simultaneous baseline separation of five proteins was achieved within 14 min by using 10 mM of 1B-3MI-TFB ILs as dynamic coating and the only running electrolyte at the voltage of +20 kV. The proposed coating technique is simple, less time-consuming, reproducible, and also stable enough for proteins separation without the need of additives. Symmetrical peaks with efficiencies up to 670,000 plates/m were obtained. Recoveries of proteins with RSD (for migration times) of 0.23-0.42% (run-to-run) and 2.5-3.8% (day-to-day) were achieved, respectively. The applicability of the proposed method in proteins separation was evaluated by the separation of egg white samples.

  9. Synthesis and thermodynamic properties of a new task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Dan; Han, Chun; Fan, Hong-Tao

    2015-07-01

    Task-specific ionic liquid 1-butyl-3-methylimidazolium salicylate ([BMI]Sal) was synthesized in two steps. In the temperature range of 298.15-353.15 K, the density and surface tension for pure ionic liquid were determined and the thermodynamic properties of the ionic liquid were discussed in terms of Glasser's theory. The standard molar entropy and lattice energy for [BMI]Sal have been estimated. In addition, the thermal expansion coefficient, α = 5.53 × 10-4 K-1, calculated by the interstice model is in extreme agreement with α (experimental) = 5.50 × 10-4 K-1.

  10. Glycine in 1-butyl-3-methylimidazolium acetate and trifluoroacetate ionic liquids: effect of fluorination and hydrogen bonding.

    PubMed

    Podgoršek, Ajda; Macchiagodena, Marina; Ramondo, Fabio; Costa Gomes, Margarida F; Pádua, Agílio A H

    2012-05-14

    The solvation of glycine in two ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium acetate, [C(1)C(4)Im][OAc], and 1-butyl-3-methylimidazolium trifluoroacetate, [C(1)C(4)Im][TFA], was studied by a combination of experimental and theoretical methods. The solubility of glycine in both ILs was determined at 333.15 K to be (8.1±0.5) and (1.0±0.5) wt % in [C(1)C(4)Im][OAc] and [C(1)C(4)Im][TFA], respectively. By IR spectroscopy it was found that, when dissolved in the ILs, glycine was mainly present in its zwitterionic form. Structural and energetic aspects of the solvation of glycine in the ILs and in mixtures of ILs and water were investigated by ab initio calculations and molecular dynamic simulations. It was observed that the firstly solvation shell around glycine consisted predominantly of acetate or trifluoroacetate anions, which formed hydrogen bonds either with the carboxylic group of neutral glycine or with the protonated ammonium group of the zwitterionic form. When water is present in the solutions, hydrogen bonds between water and the anion prevail. The overall energy of the system was decomposed into its components between pairs of species. It was established that the dominant contribution to the interaction energy between glycine and the IL was due to hydrogen bonds with the anions and the statistics of hydrogen bonds were analysed.

  11. The gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide from combustion calorimetry, vapor pressure measurements, and ab initio calculations.

    PubMed

    Emel'yanenko, Vladimir N; Verevkin, Sergey P; Heintz, Andreas

    2007-04-04

    Ionic liquids are attracting growing interest as alternatives to conventional molecular solvents. Experimental values of vapor pressure, enthalpy of vaporization, and enthalpy of formation of ionic liquids are the key thermodynamic quantities, which are required for the validation and development of the molecular modeling and ab initio methods toward this new class of solvents. In this work, the molar enthalpy of formation of the liquid 1-butyl-3-methylimidazolium dicyanamide, 206.2 +/- 2.5 kJ.mol-1, was measured by means of combustion calorimetry. The molar enthalpy of vaporization of 1-butyl-3-methylimidazolium dicyanamide, 157.2 +/- 1.1 kJ.mol-1, was obtained from the temperature dependence of the vapor pressure measured using the transpiration method. The latter method has been checked with measurements of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, where data are available from the effusion technique. The first experimental determination of the gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide, 363.4 +/- 2.7 kJ.mol-1, from thermochemical measurements (combustion and transpiration) is presented. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for 1-butyl-3-methylimidazolium dicyanamide using the G3MP2 theory. Excellent agreement with experimental results has been observed. The method developed opens a new way to obtain thermodynamic properties of ionic liquids which have not been available so far.

  12. Polymer electrolyte based on crosslinked poly(glycidyl methacrylate) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

    SciTech Connect

    Fei, Beatrice Wong Chui; Hanifah, Sharina Abu; Ahmad, Azizan; Hassan, Nur Hasyareeda

    2015-09-25

    Polymer electrolytes based on crosslinked poly(glycidyl methacrylate) as polymer host and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) as incorporated salt were prepared by in-situ photopolymerization technique. The complexes with different mass ratio of glycidyl methacrylate (GMA) monomer to BmimTFSI were investigated. The ionic conductivity of the polymer electrolyte was increased and reach the highest value of 7.50 × 10{sup −4} S cm{sup −1} at the ratio of 3:7 (GMA: BmimTFSI). The interaction between the polymer host and ionic liquid was proved by Attenuated Total Reflectance-Fourier Transformation Infra-Red Spectroscopy (ATR-FTIR). Meanwhile, the X-ray diffraction analysis shows the amorphousity of the polymer electrolyte film increase with the ionic liquid ratio.

  13. Anomalous Freezing of Nano-Confined Water in Room-Temperature Ionic Liquid 1-Butyl-3-Methylimidazolium Nitrate.

    PubMed

    Abe, Hiroshi; Takekiyo, Takahiro; Yoshimura, Yukihiro; Saihara, Koji; Shimizu, Akio

    2016-04-18

    Non-crystal formation of ice is investigated by simultaneous X-ray diffraction and differential scanning calorimetry measurements upon cooling to -100 °C. At room temperature, size-tunable water confinement (≈20 Å size) in a room-temperature ionic liquid (RTIL, 1-butyl-3-methylimidazolium nitrate, [C4 mim][NO3 ]) exists in a water-rich region (70-90 mol % D2 O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C4 mim][NO3 ]-x mol % D2 O (70

  14. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    SciTech Connect

    Hashim, Muzna; Sun, Qining; Tao, Jingming; Wells, Jr., Tyrone; Shah, Aamer; Labbe, Nicole; Ragauskas, Arthur

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% from the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.

  15. Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

    DOE PAGES

    Hashim, Muzna; Univ. of Tennessee, Knoxville, TN; Sun, Qining; ...

    2016-11-02

    The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% frommore » the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.« less

  16. New solvents designed on the basis of the molecular-microscopic properties of binary mixtures of the type (protic molecular solvent + 1-butyl-3-methylimidazolium-based ionic liquid).

    PubMed

    Fortunato, Graciela G; Mancini, Pedro M; Bravo, M Virginia; Adam, Claudia G

    2010-09-16

    The main purpose of this work is to analyze the microscopic feature of solvent systems resulting from the basis of binary mixtures formed by a protic molecular solvent (methanol, ethanol, propan-1-ol, propan-2-ol, and 2-ethoxyethanol) and a 1-butyl-3-methylimidazolium (bmim)-based ionic liquid (IL) cosolvent composed of different anions (tetrafluoroborate, hexafluorophosphate, chloride, and bromide). At the same time, a complementary aim is to evaluate the incidence of anion type on the solvation pattern. The empirical solvatochromic parameters E(T)(N), π*, β, and α were determined from the UV-vis solvatochromic shifts of adequate probes. The behavior of the solvent systems was analyzed according to their deviation from ideality. E(T)(N) polarity and π* dipolarity/polarizability exhibit positive deviation from ideal behavior in all binary mixtures at the explored compositions. Moreover, E(T)(N) and α parameters display synergetic effects in some binary mixtures composed of tetrafluoroborate and hexafluorophosphate anions. The influence of anion nature on the response patterns is clearly manifested in the basicity β and acidity α of the media. This is connected with the degree and type of interaction between the anions and the 1-butyl-3-methylimidazolium cation. The ion-pair character of the ionic liquids affects their interactions with a solute or a molecular solvent. The application of an appropriate preferential solvation model allowed us to obtain valuable information about solute-solvent and solvent-solvent interactions of the selected ionic liquid mixtures. It is possible to identify relevant mixtures paying particular attention to the most remarkable microscopic properties, the acidity and the basicity, in order to propose "new solvents". Thus, the solvating feature can be tailored selecting the molecular and/or the ionic component at a particular composition. A simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is

  17. Photoisomerization of cyanine derivatives in 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol: Influence of specific interactions

    SciTech Connect

    Mali, K. S.; Dutt, G. B.; Mukherjee, T.

    2008-03-28

    Photoisomerization of two cyanine derivatives, 3,3{sup '}-diethyloxadicarbocyanine iodide (DODCI) and merocyanine 540 (MC 540), has been investigated in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate and aqueous glycerol (93 wt % glycerol +7 wt % water) by measuring fluorescence lifetimes and quantum yields. The aim of this work is to understand how the rates of photoisomerization of DODCI and MC 540 are influenced by specific solute-solvent interactions besides the viscosity of the medium. For DODCI, it has been observed that the nonradiative rate constants, which represent the rates of photoisomerization, are almost identical in the ionic liquid and aqueous glycerol at given temperature, indicating that viscosity is the sole parameter that governs the rate of photoisomerization. In contrast, the photoisomerization rate constants of MC 540 have been found to be a factor of 2 higher in aqueous glycerol compared to the ionic liquid. The observed behavior is due to the zwitterionic character of MC 540, a consequence of which, the twisted state gets stabilized by the solute-solvent hydrogen bonding interactions in aqueous glycerol, thus lowering the barrier for isomerization.

  18. The genotoxic and cytotoxic effects of 1-butyl-3-methylimidazolium chloride in soil on Vicia faba seedlings.

    PubMed

    Liu, Tong; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Xie, Hui

    2015-03-21

    Although considered as "green" solvents, the toxic effects of ionic liquids (ILs) on organisms have been widely investigated in recent years. However, studies on the toxic effects of ILs on plants all focus on toxicity in nutrient solution. In the present paper, the toxic effects of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) on Vicia faba seedlings in soil at 0, 500, 1500, and 2500 mg kg(-1) on day 10 were studied. The present results showed that the growth of V. faba seedlings may be seriously inhibited when the IL concentrations were higher than 500 mg kg(-1). The EC50 values for shoot length, root length, and dry weight were 3886, 2483, and 3359 mg kg(-1), respectively. In addition, [C4mim]Cl caused lipid peroxidation and DNA damage at 500 mg kg(-1) and oxidative stress at 1500 mg kg(-1), which indicated that [C4mim]Cl may have genotoxicity and cytotoxicity on V. faba seedlings. Moreover, oxidative damage may be the main toxic mechanism of ILs.

  19. Synthesis, characterization and application of 1-butyl-3 methylimidazolium chloride as green material for extractive desulfurization of liquid fuel.

    PubMed

    Dharaskar, Swapnil A; Varma, Mahesh N; Shende, Diwakar Z; Yoo, Chang Kyoo; Wasewar, Kailas L

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, (1)H-NMR, and (13)C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency.

  20. Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel

    PubMed Central

    Dharaskar, Swapnil A.; Varma, Mahesh N.; Shende, Diwakar Z.; Yoo, Chang Kyoo; Wasewar, Kailas L.

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  1. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    NASA Astrophysics Data System (ADS)

    Lísal, Martin; Izák, Pavel

    2013-07-01

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m2 at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  2. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface.

    PubMed

    Lísal, Martin; Izák, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf2N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 μmol/m(2) at 300 K. For [bmim][Tf2N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are ±0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf2N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  3. Influence of the current density on the electrochemical treatment of concentrated 1-butyl-3-methylimidazolium chloride solutions on diamond electrodes.

    PubMed

    Marcionilio, Suzana M L de Oliveira; Alves, Gisele M; E Silva, Rachel B Góes; Marques, Pablo J Lima; Maia, Poliana D; Neto, Brenno A D; Linares, José J

    2016-10-01

    This paper focuses on the influence of the current density treatment of a concentrated 1-butyl-3-methylimidazolium chloride (BMImCl) solution on an electrochemical reactor with a boron-doped diamond (BDD) anode. The decrease in the total organic carbon (TOC) and the BMImCl concentration demonstrate the capability of BDD in oxidizing ionic liquids (ILs) and further mineralizing (to CO2 and NO3 (-)) more rapidly at higher current densities in spite of the reduced current efficiency of the process. Moreover, the presence of Cl(-) led to the formation of oxychlorinated anions (mostly ClO3 (-) and ClO4 (-)) and, in combination with the ammonia generated in the cathode from the nitrate reduction, chloramines, more intensely at higher current density. Finally, the analysis of the intermediates formed revealed no apparent influence of the current density on the BMImCl degradation mechanism. The current density presents therefore a complex influence on the IL treatment process that is discussed throughout this paper.

  4. Calorimetric determination of the enthalpy of 1-butyl-3-methylimidazolium bromide synthesis: a key quantity in thermodynamics of ionic liquids.

    PubMed

    Paulechka, Yauheni U; Kabo, Andrey G; Blokhin, Andrey V

    2009-11-05

    The enthalpy of the 1-butyl-3-methylimidazolium bromide [C(4)mim]Br ionic liquid synthesis reaction 1-methylimidazole (liq) + 1-bromobutane (liq) --> [C(4)mim]Br (liq) was determined in a homemade small-volume isoperibol calorimeter to be Delta(r)H degrees (298) = -87.7 +/- 1.6 kJ x mol(-1). The activation energy for this reaction in a homogeneous system E(A) = 73 +/- 4 kJ x mol(-1) was found from the results of calorimetric measurements. The formation enthalpies for the crystalline and liquid [C(4)mim]Br were determined from the calorimetric data: Delta(f)H degrees (298)(cr) = -178 +/- 5 kJ x mol(-1) and Delta(f)H degrees (298)(liq) = -158 +/- 5 kJ x mol(-1). The ideal-gas formation enthalpy of this compound Delta(f)H degrees (298)(g) = 16 +/- 7 kJ x mol(-1) was calculated using the methods of quantum chemistry and statistical thermodynamics. The vaporization enthalpy of [C(4)mim]Br, Delta(vap)H degrees (298) = 174 +/- 9 kJ x mol(-1), was estimated from the experimental and calculated formation enthalpies. It was demonstrated that vapor pressure of this ionic liquid cannot be experimentally determined.

  5. Molecular dynamics simulations of n-hexane at 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide interface

    SciTech Connect

    Lisal, Martin; Izak, Pavel

    2013-07-07

    Molecular dynamics simulations of n-hexane adsorbed onto the interface of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([bmim][Tf{sub 2}N]) are performed at three n-hexane surface densities, ranged from 0.7 to 2.3 {mu}mol/m{sup 2} at 300 K. For [bmim][Tf{sub 2}N] room-temperature ionic liquid, we use a non-polarizable all-atom force field with the partial atomic charges based on ab initio calculations for the isolated ion pair. The net charges of the ions are {+-}0.89e, which mimics the anion to cation charge transfer and polarization effects. The OPLS-AA force field is employed for modeling of n-hexane. The surface tension is computed using the mechanical route and its value decreases with increase of the n-hexane surface density. The [bmim][Tf{sub 2}N]/n-hexane interface is analyzed using the intrinsic method, and the structural and dynamic properties of the interfacial, sub-interfacial, and central layers are computed. We determine the surface roughness, global and intrinsic density profiles, and orientation ordering of the molecules to describe the structure of the interface. We further compute the survival probability, normal and lateral self-diffusion coefficients, and re-orientation correlation functions to elucidate the effects of n-hexane on dynamics of the cations and anions in the layers.

  6. Hydrogen bonding behaviors of binary systems containing the ionic liquid 1-butyl-3-methylimidazolium trifluoroacetate and water/methanol.

    PubMed

    Zhang, Qing-Guo; Wang, Nan-Nan; Wang, Shuang-Long; Yu, Zhi-Wu

    2011-09-29

    The hydrogen-bonding properties of binary systems consisting of a representative Brønsted acidic hydrophilic ionic liquid (IL) 1-butyl-3-methylimidazolium trifluoroacetate ([Bmim][CF(3)CO(2)]) and a cosolvent, water or methanol, over the entire concentration range have been investigated by methods of attenuated total reflectance infrared spectroscopy, (1)H NMR spectroscopy, and quantum chemical calculations. It has been found that the hydrogen-bonding interactions between the anion [CF(3)CO(2)](-), rather than the cation, and the cosolvent molecules are dominant at low concentration of cosolvent. The H-bond interaction site between the IL anion and water/methanol is the O atom in the -COO group, while the -CF(3) group makes a positive contribution by donating electron to the carboxylic group, forming a cooperative hydrogen-bonding system. For the cation [Bmim](+), although the C2-H is the favorable proton donor in H-bonding interactions, the water/methanol molecules form H-bonds with the alkyl C-H at low water/methanol concentration due to the stronger interaction between C2-H and [CF(3)CO(2)](-). Interestingly, we found that the interaction between methanol and the IL is stronger than that between water and the IL because the methyl group in methanol has a positive contribution to the formation of H-bonds. The following sequential order of interaction strength is established: [Bmim](+)-methanol-[CF(3)CO(2)](-) > [Bmim](+)-water-[CF(3)CO(2)](-) > [Bmim](+)-[CF(3)CO(2)](-) > [CF(3)CO(2)](-)-methanol > [CF(3)CO(2)] (-)-water > [Bmim](+)-methanol > [Bmim] (+)-water.

  7. Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium thiocyanate ionic liquid + organic solvent or water).

    PubMed

    Domańska, Urszula; Laskowska, M; Pobudkowska, Aneta

    2009-05-07

    (Solid + liquid) phase equilibria (SLE) for the binary systems, ionic liquid (IL) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN] with an alcohol (1-octanol, 1-nonanol, 1-decanol, 1-undecanol, or 1-dodecanol) or water, and (liquid + liquid) phase equilibria (LLE) for the binary systems of [BMIM][SCN] with an alkane (n-hexane, n-heptane, n-octane, n-nonane, or n-decane), benzene, an alkylbenzenes (toluene or ethylbenzene), tetrahydrofuran (THF), cycloalkanes (cyclohexane or cycloheptane), or ethers (di-n-propyl ether, di-n-butyl ether, di-n-pentyl ether, n-butylmethyl ether, tert-butylmethyl ether (MTBE), or tert-butylethyl ether (ETBE)) have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from 250 to 430 K. In the case of systems IL + alkane, cycloalkane, or ether, the mutual immiscibility with an upper critical solution temperature (UCST) was detected, and in the systems of IL + benzene, alkylbenzene, or THF, the mutual immiscibility with a lower critical solution temperature (LCST) was observed. UV-vis spectroscopy was used to determine the very small compositions of the IL in the n-hexane (about 2 x 10(-5) IL mole fraction), benzene (about 2 x 10(-3) IL mole fraction), cyclohexane (about 2 x 10(-5) IL mole fraction), and THF (about 1.2 x 10(-2) IL mole fraction). For the binary systems containing alcohol, it was noticed that with increasing chain length of an alcohol, the solubility decreases. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by the simultaneous TG/DTA experiments. Well-known UNIQUAC, Wilson, and NRTL equations have been used to correlate the experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + alkane

  8. Electrochemical reduction of aromatic ketones in 1-butyl-3-methylimidazolium-based ionic liquids in the presence of carbon dioxide: the influence of the ketone substituent and the ionic liquid anion on bulk electrolysis product distribution.

    PubMed

    Zhao, Shu-Feng; Horne, Mike; Bond, Alan M; Zhang, Jie

    2015-07-15

    Electrochemical reduction of aromatic ketones, including acetophenone, benzophenone and 4-phenylbenzophenone, has been undertaken in 1-butyl-3-methylimidazolium-based ionic liquids containing tetrafluoroborate ([BF4](-)), trifluoromethanesulfonate ([TfO](-)) and tris(pentafluoroethyl)trifluorophosphate ([FAP](-)) anions in the presence of carbon dioxide in order to investigate the ketone substituent effect and the influence of the acidic proton on the imidazolium cation (C2-H) on bulk electrolysis product distribution. For acetophenone, the minor products were dimers (<10%) in all ionic liquids, which are the result of acetophenone radical anion coupling. For benzophenone and 4-phenylbenzophenone, no dimers were formed due to steric hindrance. In these cases, even though carboxylic acids were obtained, the main products generated were alcohols (>50%) derived from proton coupled electron transfer reactions involving the electrogenerated radical anions and C2-H. In the cases of both acetophenone and benzophenone, the product distribution is essentially independent of the ionic liquid anion. By contrast, 4-phenylbenzophenone shows a product distribution that is dependent on the ionic liquid anion. Higher yields of carboxylic acids (∼40%) are obtained with [TfO](-) and [FAP](-) anions because in these ionic liquids the C2-H is less acidic, making the formation of alcohol less favourable. In comparison with benzophenone, a higher yield of carboxylic acid (>30% versus ∼15%) was obtained with 4-phenylbenzophenone in all ionic liquids due to the weaker basicity of 4-phenylbenzophenone radical anion.

  9. Solvent and rotational relaxation of Coumarin-153 in a micellar solution of a room-temperature ionic liquid, 1-butyl-3-methylimidazolium octyl sulfate, in ethylammonium nitrate

    NASA Astrophysics Data System (ADS)

    Rao, Vishal Govind; Ghatak, Chiranjib; Pramanik, Rajib; Sarkar, Souravi; Sarkar, Nilmoni

    2010-10-01

    We have investigated the micelle formation by room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium octyl sulfate (bmimOs) with another RTIL, ethyl ammonium nitrate (EAN). In addition, the effect of micelle formation on the solvation and rotational relaxation dynamics have been observed using steady-state and picoseconds time-resolved spectroscopy. Both the solvent and rotational relaxations of Coumarin-153 are retarded in the micelle compared to that of neat EAN. The increase in average solvation time on going from neat EAN to bmimOs-EAN micelle is very small compared to the increase in solvation time on going from pure water to water containing micelle.

  10. Experimental and theoretical investigation of multistage extraction of 1,3-propanediol using the extraction system phosphate/1-butyl-3-methylimidazolium trifluoromethanesulfonate/water.

    PubMed

    Müller, Anja; Lutze, Philip; Górak, Andrzej

    2013-01-01

    The separation of 1,3-propanediol from fermentation broth is a challenging and energy-demanding step using conventional unit operations. One alternative process is the use of an aqueous two-phase system incorporating ionic liquids to use synergy effects of both technologies. Within this manuscript, the technical feasibility of the extraction of 1,3-propanediol using the aqueous two-phase system phosphate (salt)/1-butyl-3-methylimidazolium trifluoromethanesulfonate (ionic liquid)/water in a continuously operated process in pilot-scale is presented. The extraction was performed in a multistage mixer-settler unit and successfully modeled with an equilibrium-stage model and correlations to describe the liquid-liquid equilibrium of the salt/ionic liquid/water two-phase system. The developed and validated model was used for a further investigation of the influence of different process parameters in the determined operating window. Theses parameters include the number of stages, the phase ratio, the pH, and the mass fraction of the involved components. The results prove that the phosphate and 1-butyl-3-methylimidazolium trifluoromethanesulfonate mass fraction, the phase ratio, and the number of stages have a considerable influence on the recovery of 1,3-propanediol, whereas the pH value has only a smaller impact. Those results can be used for optimization of the system as well as for targeting future research within this area.

  11. Synergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity

    PubMed Central

    2015-01-01

    An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities. PMID:25068078

  12. Interaction between amphiphilic ionic liquid 1-butyl-3-methylimidazolium octyl sulfate and anionic polymer of sodium polystyrene sulfonate in aqueous medium

    NASA Astrophysics Data System (ADS)

    Barhoumi, Z.; Saini, M.; Amdouni, N.; Pal, A.

    2016-09-01

    The micellization of an aqueous solution of the surface active ionic liquid (SAIL), 1-butyl-3-methylimidazolium octylsufate (C4mim)(C8OSO3) and its interaction with an anionic polymer sodium polystyrene sulfonate, (NaPSS) were studied using conductimetry, tensiometry and fluorimetry. Surface tension profile shows a more dramatic increase in the value of surface tension of aqueous (C4mim)(C8OSO3) before the critical micelle concentration (cmc) of IL. The critical micelle concentration (cmc) value of this surfactant was found out from conductance measurements. The thermodynamic parameters, i.e., Gibb's free energy, enthalpy, and entropy of micellization of the IL in aqueous solution have been calculated. Behavior of fluorescence probe confirms the binding interactions between SAIL and the polyelectrolyte.

  13. Physical Properties of Ionic Liquids Consisting of the 1-Butyl-3-Methylimidazolium Cation with Various Anions and the Bis(trifluoromethylsulfonyl)imide Anion with Various Cations

    SciTech Connect

    Jin, Hui; O'Hare, Bernie; Dong, Jing; Arzhantsev, Sergei; Baker, Gary A; Wishart, James F.; Benesi, Alan; Maroncelli, Mark

    2008-01-01

    Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.

  14. Syntheses and crystal structures of two ionic liquids with halogen-bonding groups: 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates

    NASA Astrophysics Data System (ADS)

    Mukai, Tomohiro; Nishikawa, Keiko

    2010-05-01

    We have prepared and characterized two novel Lewis acidic ionic liquids, 4,5-dibromo- and 4,5-diiodo-1-butyl-3-methylimidazolium trifluoromethanesulfonates, using differential scanning calorimetry and single-crystal X-ray analysis. The effect of the halogen species on the phase transition behaviour and the cation-anion interacting geometry was investigated. The minor difference in chemical structure strongly affects the melting point, glass transition temperature and crystal structure because of the different halogen-bonding strength and linearity between C-Br⋯O and C-I⋯O. Both the salts melt above room temperature, but the fused salts show glass-forming property and poor crystallizability.

  15. Vibrational sum-frequency generation spectroscopy of ionic liquid 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate at the air-water interface

    NASA Astrophysics Data System (ADS)

    Saha, Ankur; SenGupta, Sumana; Kumar, Awadhesh; Choudhury, Sipra; Naik, Prakash D.

    2016-08-01

    The structure and orientation of room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate [PF3(C2F5)3], commonly known as [bmim][fap], have been investigated at the air-[bmim][fap] and air-water interfaces, employing vibrational sum-frequency generation (VSFG) spectroscopy. The VSFG spectra in the CH stretch region suggest presence of the [bmim] cation at the interfaces. Studies reveal that the butyl chain protrudes out into air, and the imidazolium ring lies almost planar to the interface. The CH stretch intensities get enhanced at the air-water interface, mainly because of polar orientation of imidazolium cation induced by interfacial water molecules. The OH stretch intensities are also enhanced at the air-water interface due to polar orientation of interfacial water molecules induced by [bmim][fap]. The Brewster angle microscopy suggests self aggregation of [bmim][fap] in the presence of water, and the aggregation becomes extensive showing dense surface domains with time. However, the surface pressure is almost unaffected due to aggregation.

  16. How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

    PubMed

    Lépori, Cristian M O; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2016-01-21

    The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

  17. Electrochemical and Thermodynamic Properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) in 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid

    PubMed Central

    Yang, Xiao; He, Ling; Qin, Song; Tao, Guo-Hong; Huang, Ming; Lv, Yi

    2014-01-01

    The electrochemical behavior and thermodynamic properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) were studied in 1-butyl-3-methylimidazolium bromide ionic liquid (BmimBr) at a glassy carbon (GC) electrode in the range of 293–338 K. The electrode reaction of Eu(III) was found to be quasi-reversible by the cyclic voltammetry, the reactions of the other three lanthanide ions were regarded as irreversible systems. An increase of the current intensity was obtained with the temperature increase. At 293 K, the cathodic peak potentials of −0.893 V (Eu(III)), −0.596 V (Sm(III)), −0.637 V (Dy(III)) and −0.641 V (Nd(III)) were found, respectively, to be assigned to the reduction of Ln(III) to Ln(II). The diffusion coefficients (Do), the transfer coefficients (α) of Ln(III) (Ln = Eu, Sm, Dy, Nd) and the charge transfer rate constants (ks) of Eu(III) were estimated. The apparent standard potential (E0*) and the thermodynamic properties of the reduction of Eu(III) to Eu(II) were also investigated. PMID:24752584

  18. Physicochemical properties, structure, and conformations of 1-Butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim]NTf2 ionic liquid.

    PubMed

    Blokhin, Andrey V; Paulechka, Yauheni U; Strechan, Aliaksei A; Kabo, Gennady J

    2008-04-10

    Thermodynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim]NTf2) ionic liquid have been studied by adiabatic calorimetry in the temperature range of 5 to 370 K. This compound has been found to form crystal, liquid, and glass. The temperature and enthalpy of fusion for [C(4)mim]NTf(2) have been determined to be T(fus) = 270.22 +/- 0.02 K and Delta(fus)H = 23.78 +/- 0.04 kJ.mol(-1), respectively. The heat capacity of crystalline [C(4)mim]NTf(2) in the T range of 205 to 255 K may vary by a few percent, subject to the procedure of the crystal preparation. The glass transition temperature for [C(4)mim]NTf(2) has been found to be T(g) = 181.5 +/- 0.1 K. On the basis of the results of DFT quantum chemical calculations, the experimental vibrational spectra, and the available literature data, thermodynamic properties of [C(4)mim]NTf(2) in the ideal-gas state have been calculated by the statistical thermodynamic methods. The entropy values for the gaseous compound obtained from the experimental data and the calculations are in satisfactory agreement.

  19. Hydrolysis of insoluble cellulose to glucose catalyzed by cellulase-containing liposomes in an aqueous solution of 1-butyl-3-methylimidazolium chloride.

    PubMed

    Yoshimoto, Makoto; Tanimura, Kazuhiko; Tokunaga, Kazuki; Kamimura, Akio

    2013-01-01

    The liposome containing cellulase from Trichoderma viride was prepared under the condition that an appreciable amount of cellulase was incorporated in lipid membranes. The liposomal cellulase and free enzyme were examined in their hydrolytic activities to insoluble cellulose powder CC31 in the acetate buffer solution (pH 4.8) of 15 w/w% [Bmim][Cl] (1-butyl-3-methylimidazolium chloride). The mean diameter and size distribution of cellulase-containing liposome were practically unchanged under the above condition. The free cellulase was deactivated more rapidly than the liposomal cellulase in catalyzing the hydrolysis of 2.0 g/l CC31 at 45°C in the presence of [Bmim][Cl] for 48 h. The activities of liposomal and free cellulase to cellobiose as soluble substrate were less susceptible to [Bmim][Cl] than their cellulolytic activities to CC31, meaning that β-glucosidase is relatively stable among the three enzyme components of cellulase. The rate of glucose production could be appreciably improved by the pretreatment of CC31 with [Bmim][Cl] alone at 120°C for 30 min followed by the liposomal cellulase-catalyzed hydrolysis of the substrate at 45°C at the [Bmim][Cl] concentration of 15 w/w%.

  20. Mechanical exfoliation of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) providing graphene nanoplatelets that exhibit enhanced electrocatalysis

    NASA Astrophysics Data System (ADS)

    Hayes, William Ignatius; Lubarsky, Gennady; Li, Meixian; Papakonstantinou, Pagona

    2014-12-01

    A novel production method for graphene nanoplatelets (GPs) with enhanced electrocatalytic behaviour is presented. GPs show improvement in their oxygen reduction reaction (ORR) catalysis after prolonging the grinding of graphite in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6). Nitrogen doping of the GPs has inferred a further increase in ORR. The ORR onset potential, cathodic current magnitude and electron transfer efficiency have all improved as a direct consequence of increasing the graphite grinding duration from 30 min to 4 h. Atomic force microscopy has confirmed a decrease in the GP diameter and height as the grinding increases. Raman spectroscopy indicates a higher level of defects present after prolonging the graphite grinding in BMIM-PF6, most likely a result of the increased edge plane exposure. This increased edge plane appears to promote a higher level of nitrogen incorporation as the graphite grinding duration increases, as confirmed by X-ray photoelectron spectroscopy analysis. The stability of the cathodic current assessed by chronoamperometry analysis is higher for the GP and nitrogen doped graphene nanoplatelet (N-GP) samples than the platinum on carbon black (Pt/C). This study presents a novel process for the production of nitrogen doped graphene nanoplatelets, constituting a strategy for the up-scaled production of electrocatalysts.

  1. Amplified electrochemical sensor employing CuO/SWCNTs and 1-butyl-3-methylimidazolium hexafluorophosphate for selective analysis of sulfisoxazole in the presence of folic acid.

    PubMed

    Karimi-Maleh, Hassan; Amini, Fatemeh; Akbari, Ahmad; Shojaei, Moein

    2017-06-01

    In the present work, CuO nanoparticle decorated on single wall carbon nanotubes (CuO/SWCNTs) nanocomposite was successfully synthesized by chemical precipitation method and used for modification of carbon paste electrode (CPE) in the presence of 1-butyl-3-methylimidazolium hexafluorophosphate (1-B-3-MIHFP) liquid as binder. The novel voltammetric sensor was used as first electrochemical sensor for determination of sulfisoxazole (SFX). CuO/SWCNTs nanocomposite characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD) methods. Voltammetric methods such as cyclic voltammetry, square wave voltammetry (SWV), electrochemical impedance spectroscopy (EIS) and chronoamperometry were performed to assess the electrochemical performance of CuO/SWCNTs/1-B-3-MIHFP/CPE towards SFX in aqueous solution. The voltammetric obtained data confirm the significant enhancement of oxidation current and reduction overvoltage for electro-oxidation of SFX at a surface of CuO/SWCNTs/1-B-3-MIHFP/CPE. The square wave voltammetric response shows the linear increment of oxidation signals with an increase in the concentration of SFX in the range of 0.08-650μM with limit of detection 0.04μM. Using CuO/SWCNTs/1-B-3-MIHFP/CPE the SFX and folic acid peaks are separated ca. 0.72 and 0.895V, respectively; hence SFX can be detected in the presence of folic acid. Finally, the CuO/SWCNTs/1-B-3-MIHFP/CPE was used as high sensitive tools for analysis of SFX and folic acid in real samples.

  2. Conductivity and spectroscopic investigation of bis(trifluoromethanesulfonyl)imide solution in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide.

    PubMed

    Yu, Lei; Pizio, Benjamin S; Vaden, Timothy D

    2012-06-07

    Protic ionic liquids (PILs) are promising alternatives to water for swelling Nafion as a fuel cell proton exchange membrane (PEM). PILs can significantly improve the high-temperature performance of a PEM. The proton dissociation and solvation mechanisms in a PIL, which are keys to understanding the proton transportation and conductivity, have not been fully explored. In this paper, we used FTIR, Raman, and electronic spectroscopy with computational simulation techniques to explore the spectroscopic properties of bis(trifluoromethanesulfonyl)imide (HTFSI) solutions in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI) ionic liquid at concentrations from ∼0.1 to as high as ∼1.0 M. Solution conductivities were measured at room temperature and elevated temperatures up to ∼65 °C. The solution structure and properties depend on the concentration of HTFSI. At lower concentration, around 0.1 M, the HTFSI solution has higher conductivity than pure BMITFSI. However, the conductivity decreases when the concentration increases from 0.1 to 1.0 M. Temperature-dependent conductivities followed the Vogel-Fulcher-Tamman equation at all concentrations. Conductivity and spectroscopy results elucidate the complicated ionization and solvation mechanism of HTFSI in BMITFSI solutions. Raman spectroscopy and density functional theory (DFT) calculations are consistent with the complete ionization of HTFSI to generate solvated H(+) at low concentrations. FTIR, Raman, and electronic spectroscopic results as well as DFT computational simulation indicated that when the concentration is as high as 1.0 M, a significant amount of TFSI(-) is protonated, most likely at the imide nitrogen.

  3. Characterization of the influence of the ionic liquid 1-butyl-3-methylimidazolium chloride on the structure and thermal stability of green fluorescent protein.

    PubMed

    Heller, William T; O'Neill, Hugh M; Zhang, Qiu; Baker, Gary A

    2010-11-04

    Ionic liquids (ILs) are finding a vast array of applications as novel solvents for a wide variety of processes that include enzymatic chemistry, particularly as more biocompatible ILs are designed and discovered. While it is assumed that a native or near-native structure is required for enzymatic activity, there is some evidence that ILs alter protein structure and oligomerization states in a manner than can negatively impact function. The IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, is a well-studied, water-miscible member of the popular 1-alkyl-3-methylimidazolium IL family. To improve our understanding of the impact of water-miscible ILs on proteins, we have characterized the structure and oligomerization state of green fluorescent protein (GFP) in aqueous solutions containing 25 and 50 vol % [bmim]Cl using a combination of optical spectroscopy and small-angle neutron scattering (SANS). Measurements were also performed as a function of temperature to provide insight into the effect of the IL on the thermal stability of GFP. While GFP exists as a dimer in water, the presence of 25 vol % [bmim]Cl causes GFP to transition to a monomeric state. The SANS data indicate that GFP is a great deal less compact in 50 vol % [bmim]Cl than in neat water, indicative of unfolding from the native structure. The oligomerization state of the protein in IL-containing aqueous solution changes from a dimer to a monomer in response to the IL, but does not change as a function of temperature in the IL-containing solution. The SANS and spectroscopic results also demonstrate that the addition of [bmim]Cl to the solution decreases the thermal stability of GFP, allowing the protein to unfold at lower temperatures than in aqueous solution.

  4. Electrochemical and spectral properties of ferrocene (Fc) in ionic liquid: 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)]. Concentration effects.

    PubMed

    Vorotyntsev, Mikhail A; Zinovyeva, Veronika A; Konev, Dmitry V; Picquet, Michel; Gaillon, Laurent; Rizzi, Cecile

    2009-01-29

    Several earlier studies of the electrochemical oxidation of ferrocene (Fc) in room-temperature ionic liquids revealed an essentially nonlinear dependence of the oxidation current on the Fc concentration in its relatively dilute solutions, with its formally calculated diffusion coefficient strongly increasing with the concentration. Since no plausible mechanism leading to this very unusual finding had been proposed, our study of Fc solutions in 1-butyl-3-methylimidazolium triflimide, [BMIM][NTf(2)], was performed to verify whether the above observation originated from an incorrect determination of the dissolved Fc concentration. Our observations have demonstrated that reliable control of the Fc concentration in solution is complicated by factors such as the low amount of Fc used to prepare small-volume solutions or the great difficulty to dissolve completely a solid powder in a solvent with an extremely high viscosity. An unexpected additional complication is related to a sufficiently high volatility of Fc which manifests itself even at room temperature and especially at elevated temperatures or/and in the course of vacuum treatment of its solutions or its solid powder. Parallel measurements of electrochemical responses and UV-visible spectra for several series of Fc solutions of various concentrations (prepared with the use of different procedures) have shown a perfect parallelism between the peak current and the intensity of the absorption band in the range of 360-550 nm, leading us to the conclusion of a linear relationship between the oxidation current and the molecularly dissolved Fc concentration. The relations of these measured characteristics with the estimated Fc concentration in these solutions have demonstrated a much greater dispersion (attributed to the difficulty of a precise measurement of the latter) but without a significant deviation from the linearity in general. This finding has allowed us to estimate the diffusion coefficient of this species: D

  5. Ultrasound-promoted catalyst-free one-pot four component synthesis of 2H-indazolo[2,1-b]phthalazine-triones in neutral ionic liquid 1-butyl-3-methylimidazolium bromide.

    PubMed

    Shekouhy, Mohsen; Hasaninejad, Alireza

    2012-03-01

    A catalyst-free one-pot four component methodology for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones under ultrasonic irradiation at room temperature using 1-butyl-3-methylimidazolium bromide, [Bmim]Br, as a neutral reaction medium is described. A broad range of structurally diverse aldehydes (aromatic aldehydes bearing electron withdrawing and/or electron releasing groups as well as heteroaromatic aldehydes) were applied successfully, and corresponding products were obtained in good to excellent yields without any byproduct.

  6. The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles.

    PubMed

    Ferreyra, Darío D; Correa, N Mariano; Silber, Juana J; Falcone, R Darío

    2012-03-14

    The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N

  7. (BMI)3LnCl6 crystals as models for the coordination environment of LnCl3 (Ln = Sm, Eu, Dy, Er, Yb) in 1-butyl-3-methylimidazolium chloride ionic-liquid solution.

    PubMed

    Han, Yulun; Lin, Cuikun; Meng, Qingguo; Dai, Fengrong; Sykes, Andrew G; Berry, Mary T; May, P Stanley

    2014-06-02

    A series of (BMI)3LnCl6 (Ln = Sm, Eu, Dy, Er, Yb) crystals was prepared from solutions of LnCl3 dissolved in the ionic liquid, 1-butyl-3-methylimidazolium chloride (BMICl). Crystals with Ln = 5% Sm + 95% Gd and with Ln = 5% Dy + 95% Gd were also grown to assess the importance of cross-relaxation in the Sm and Dy samples. The crystals are isostructural, with monoclinic space group P21/c and four formula units per unit cell. The first coordination sphere of Ln(3+) consists of six Cl(-) anions forming a slightly distorted octahedral LnCl6(3-) center. The second coordination sphere is composed of nine BMI(+) cations. The emission spectra and luminescence lifetimes of both (BMI)3LnCl6 crystals and LnCl3 in BMICl solution were measured. The spectroscopic similarities suggest that crystalline (BMI)3LnCl6 provides a good model of the Ln(3+) coordination environment in BMICl solution.

  8. Dynamics of solvent and rotational relaxation of coumarin 153 in room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate confined in Brij-35 micelles: a picosecond time-resolved fluorescence spectroscopic study.

    PubMed

    Chakraborty, Anjan; Seth, Debabrata; Chakrabarty, Debdeep; Setua, Palash; Sarkar, Nilmoni

    2005-12-15

    The dynamics of solvent and rotational relaxation of Coumarin 153 (C-153) in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and in the ionic liquid confined in Brij-35 micellar aggregates have been investigated using steady-state and time-resolved fluorescence spectroscopy. We observed slower dynamics in the presence of micellar aggregates as compared to the pure IL. However, the slowing down in the solvation time on going from neat IL to IL-confined micelles is much smaller compared to that on going from water to water-confined micellar aggregates. The increase in solvation and rotational time in micelles is attributed to the increase in viscosity of the medium. The slow component is assumed to be dependent on the viscosity of the solution and involves large-scale rearrangement of the anions and cations while fast component is assumed to originate from the initial response of the anions during excitation. The slow component increases due to the increase in the viscosity of the medium and increase in fast component is probably due to the hydrogen bonding between the anions and polar headgroup of the surfactant. The dynamics of solvent relaxation was affected to a small extent due to the micelle formation.

  9. Interaction of ionic liquid with water in ternary microemulsions (Triton X-100/water/1-butyl-3-methylimidazolium hexafluorophosphate) probed by solvent and rotational relaxation of coumarin 153 and coumarin 151.

    PubMed

    Seth, Debabrata; Chakraborty, Anjan; Setua, Palash; Sarkar, Nilmoni

    2006-08-29

    The interaction of ionic liquid with water in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/Triton X-100 (TX-100)/H2O ternary microemulsions, i.e., "[bmim][PF6]-in-water" microregions of the microemulsions, has been studied by the dynamics of solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 151 (C-151). The variation of the time constants of solvent relaxation of C-153 is very small with an increase in the [bmim][PF6]/TX-100 ratio (R). The rotational relaxation time of C-153 also remains unchanged in all micremulsions of different R values. The invariance of solvation and rotational relaxation times of C-153 indicates that the position of C-153 remains unaltered with an increase in R and probably the probe is located at the interfacial region of [bmim][PF6] and TX-100 in the microemulsions. On the other hand, in the case of C-151, with an increase in R the fast component of the solvation time gradually increases and the slow component gradually decreases, although the change in solvation time is small in comparison to that of microemulsions containing common polar solvents such as water, methanol, acetonitrile, etc. The rotational relaxation time of C-151 increases with an increase in R. This indicates that with an increase in the [bmim][PF6] content the number of C-151 molecules in the core of the microemulsions gradually increases. In general, the solvent relaxation time is retarded in this room temperature ionic liquid/water-containing microemulsion compared to that of a neat solvent, although retardation is very small compared to that of the solvent relaxation time of the conventional solvent in the core of the microemulsions.

  10. Co-electroosmotic capillary electrophoresis of basic proteins with 1-alkyl-3-methylimidazolium tetrafluoroborate ionic liquids as non-covalent coating agents of the fused-silica capillary and additives of the electrolyte solution.

    PubMed

    Corradini, Danilo; Nicoletti, Isabella; Bonn, Günther K

    2009-06-01

    The paper reports the results of a study carried out to evaluate the use of three 1-alkyl-3-methylimidazolium-based ionic liquids as non-covalent coating agents for bare fused-silica capillaries and additives of the electrolyte solutions (BGE) for CE of basic proteins in the co-EOF separation mode. The three ionic liquids are differentiated from each other by the length of the alkyl group on the imidazolium cation, consisting of either an ethyl, butyl or octyl substituent, whereas tetrafluoroborate is the common anionic component of the ionic liquids. Coating the capillary with the ionic liquid resulted in improved peak shape and protein separation, while the EOF was maintained cathodic. This indicates that each ionic liquid is effective at masking the protein interaction sites on the inner surface of the capillary, also when its adsorption onto the capillary wall has not completely neutralized all the negative charges arising from the ionization of the silanol groups and the ionic liquid is not incorporated into the BGE employed for separation. Using the coated capillaries with BGE containing the ionic liquid employed for the coating, at concentration low enough to maintaining the EOF cathodic, both peak shape and protein separation varied to different extents, based on the particular ionic liquid used and its concentration. Fast and efficient separation of the model basic protein mixture in co-electroosmotic CE is obtained with the 1-butyl-3-methylimidazolium tetrafluoroborate coated capillary and 100 mM acetate buffer (pH 4.0) containing 4.4 mM 1-butyl-3-methylimidazolium tetrafluoroborate as the BGE.

  11. Electrospray of 1-Butyl-3-Methylimidazolium Dicyanamide Under Variable Flow Rate Operations

    DTIC Science & Technology

    2014-06-27

    between the cone and jet structure known as the neck . The second zone occurs at the jet breakup region located at the jet tip. Along with small ions...Droplets Extractor Ion Emission Zones Neck Fig. 1 Taylor cone structure and ion emission zones of a capillary emitter. Table 1 Physical properties of...varies as a ring of the integrated current hemisphere. Each ring has the circumference at the given angle on the hemisphere and a width of 0.85 mm

  12. ALPHA-AMYLASE ACTIVITY IN VARIOUS CONCENTRATIONS OF THE IONIC LIQUID, 1-BUTYL-3-METHYLIMIDAZOLIUM CHLORIDE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch is an extremely abundant, economical and versatile industrial commodity. Many industrial uses of starch depend on hydrolyzing the polymer for the conversion of glucose and maltodextrins. Starch hydrolysis is frequently achieved by utilizing alpha-amylase, which is an endo-acting enzyme that...

  13. Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose.

    PubMed

    Qi, Xinhua; Li, Luyang; Tan, Tengfei; Chen, Wenting; Smith, Richard L

    2013-03-19

    Functional carbonaceous material (FCM) loaded with carboxylic groups was prepared by hydrothermal carbonization of cellulose in the presence of acrylic acid. The resulting FCM was used as adsorbent for recovery of a water-soluble ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). The FCM consisted of microspheres (100-150 nm) and had a low surface area (ca. 20 m(2)/g), but exhibited adsorption capacity comparable to that of commercial activated carbon which can be attributed to the presence of high content of polar oxygenated groups (-OH, -C═O, -COOH) as revealed by spectral analyses. Sorption of [BMIM][Cl] onto FCM adsorbent could be well-described by pseudo-second-order kinetics. Thermodynamic and adsorption isothermal analyses revealed that the adsorption process was spontaneous, exothermic, and could be described by the Freundlich adsorption model. The FCM adsorbent could be regenerated effectively and recycled for at least three times without loss of adsorption capacity. The results of this work provide a facile method for production of functional carbonaceous materials from renewable resources that can be used for treatment of aqueous streams containing small concentrations of ionic liquid, [BMIM][Cl].

  14. CRYSTAL POLYMORPHISM IN 1-BUTYL-3-METHYLIMIDAZOLIUM HALIDES: SUPPORTING IONIC LIQUID FORMATION THROUGH INHIBITION OF CRYSTALLIZATION. (R828257)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  15. Ionic liquid 1-butyl-3-methylimidazolium cyanamide (bmim [dca]) as a solvent and catalyst for acylation of maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have found a novel method to prepare maltodextrin stearate with DS upto 0.60 in 90% yields from maltodextrin in IL bmim[dca] reacted with vinyl stearate or stearic acid. In this work we have demonstrated that IL could simultaneously act as a solvent and as a catalyst for reaction of maltodextrin...

  16. Thermodynamic, Dynamic, and Structural Properties of Ionic Liquids Comprised of 1-butyl-3-methylimidazolium Cation and Nitrate, Azide, or Dicyanamide Anions

    DTIC Science & Technology

    2010-04-28

    Voth used a coarse-grained model to investigate spatial heterogeneities in alkyl imidazolium based ILs with NO3 anion.xxii These simulations showed... imidazolium -based cations and N3 anion have been reported in the literature. II. Simulation details. Subsequently to the publication of the original...by examining atomistic intermolecular pair distribution functions. Specifically, in Figure 3 we show g(r) between hydrogens on imidazolium ring (Hi

  17. Ultraviolet Photoionization Efficiency of the Vaporized Ionic Liquid 1-Butyl-3-Methylimidazolium Tricyanomethanide: Direct Detection of the Intact Ion Pair (Post Print)

    DTIC Science & Technology

    2012-09-21

    Lovelock , K. R. J.; Satterly, C. J.; Villar-Garcia, I. J. Phys. Chem. Chem. Phys. 2007, 9, 982−990. (11) Strasser, D.; Goulay, F.; Kelkar, M. S.; Maginn, E...J.; Leone, S. R. J. Phys. Chem. A 2007, 111, 3191−3915. (12) Lovelock , K. R. J.; Deyko, A.; Corfield, J.-A.; Gooden, P. N.; Licence, P.; Jones, R. G

  18. Phase Behavior of N2O and CO2 in Room-Temperature Ionic Liquids [bmim][Tf2N], [bmim][BF4], [bmim][N(CN)2], [bmim][Ac], [eam][NO3], and [bmim][SCN

    NASA Astrophysics Data System (ADS)

    Shiflett, Mark B.; Niehaus, Anne Marie S.; Elliott, Beth A.; Yokozeki, A.

    2012-03-01

    The gas solubility of nitrous oxide (N2O) in room-temperature ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium thiocyanate, and ethylammonium nitrate has been measured at isothermal conditions from about (283 to 348)K using a gravimetric microbalance. The observed pressure-temperature composition ( PTx) data have been analyzed by use of a generic Redlich-Kwong equation-of-state (EOS) model, which has been successfully applied in our previous works. The interaction parameters have been determined using our measured vapor-liquid equilibrium data. Vapor-liquid-liquid equilibrium measurements have been made and validate EOS model predictions which suggest that these systems demonstrate Type III and Type V phase behavior, according to the classification of van Konynenburg and Scott. The global phase behavior of N2O has also been compared with both the measured data from this study and literature data for carbon dioxide (CO2) in each ionic liquid and Henry's law constants are compared at room temperature (298.15 K).

  19. Ionic liquid-in-oil microemulsions.

    PubMed

    Eastoe, Julian; Gold, Sarah; Rogers, Sarah E; Paul, Alison; Welton, Tom; Heenan, Richard K; Grillo, Isabelle

    2005-05-25

    Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets.

  20. Properties of an ionic liquid-tolerant Bacillus amyloliquefaciens CMW1 and its extracellular protease.

    PubMed

    Kurata, Atsushi; Senoo, Humiya; Ikeda, Yasuyuki; Kaida, Hideaki; Matsuhara, Chiaki; Kishimoto, Noriaki

    2016-07-01

    An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF3SO3) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF3SO3). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF3SO3, [BMIM]Cl, [BMIM]CF3SO3, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0-12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.

  1. Aminodifluorosulfinium Tetrafluoroborate Salts as Stable and Crystalline Deoxofluorinating Reagents

    PubMed Central

    2009-01-01

    Aminodifluorosulfinium tetrafluoroborate salts were found to act as efficient deoxofluorinating reagents when promoted by an exogenous fluoride source and, in most cases, exhibited greater selectivity by providing less elimination byproduct as compared to DAST and Deoxo-Fluor. Aminodifluorosulfinium tetrafluoroborates are easy handled crystalline salts that show enhanced thermal stability over dialkylaminosulfur trifluorides, are storage-stable, and unlike DAST and Deoxo-Fluor do not react violently with water. PMID:19799406

  2. Microemulsions with an ionic liquid surfactant and room temperature ionic liquids as polar pseudo-phase.

    PubMed

    Zech, Oliver; Thomaier, Stefan; Bauduin, Pierre; Rück, Thomas; Touraud, Didier; Kunz, Werner

    2009-01-15

    In this investigation we present for the first time microemulsions comprising an ionic liquid as surfactant and a room-temperature ionic liquid as polar pseudo-phase. Microemulsions containing the long- chain ionic liquid1-hexadecyl-3-methyl-imidazolium chloride ([C16mim][Cl]) as surfactant, decanol as cosurfactant, dodecaneas continuous phase and room temperature ionic liquids (ethylammonium nitrate (EAN) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim

  3. Ionic liquids influence on the surface properties of electron beam irradiated wood

    NASA Astrophysics Data System (ADS)

    Croitoru, Catalin; Patachia, Silvia; Doroftei, Florica; Parparita, Elena; Vasile, Cornelia

    2014-09-01

    In this paper, the influence of three imidazolium-based ionic liquids (1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-hexyl-3-methylimidazolium chloride) on the structure and surface properties of sycamore maple (Acer pseudoplatanus) veneers submitted to electron beam irradiation with a dose of 50 kGy has been studied by using Fourier transform infrared spectroscopy, as well as image, scanning electron microscopy/SEM/EDX, atomic force microscopy and contact angle analysis. The experimental results have proven that the studied ionic liquids determine a better preservation of the structural features of wood (cellulose crystallinity index and lignin concentration on the surface) as well as some of surface properties such as surface energy, roughness, color upon irradiation with electron beam, in comparison with the reference wood, but surface composition is changed by treatment with imidazolium-based ionic liquids mainly with 1-butyl-3-methylimidazolium tetrafluoroborate. Also, under electron beam irradiation covalent bonding of the imidazolium moiety to wood determines a higher resistance to water penetration and spreading on the surface.

  4. Ionic-liquid-assisted synthesis of YF{sub 3} with different crystalline phases and morphologies

    SciTech Connect

    Zhong Haoxiang; Hong Jianming; Cao Xiaofeng; Chen Xuetai Xue Ziling

    2009-03-05

    YF{sub 3} with different crystalline phases and morphologies have been prepared via a facile hydrothermal route assisted by imidazolium ionic liquids 1-butyl-3-methylimidazolium tetrafluoroborate (C{sub 4}mimBF{sub 4}) or 1-butyl-3-methylimidazolium hexafluorophosphate (C{sub 4}mimPF{sub 6}). The microstructures and morphologies of YF{sub 3} particles were characterized by X-ray powder diffraction, X-ray photoelectron spectra (XPS), transmission electron microscopy (TEM), high resolution electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). Cubic and orthorhombic YF{sub 3} were selectively synthesized by adjusting the molar ratio of the reagents and using C{sub 4}mimBF{sub 4} as the fluoride source, while only orthorhombic YF{sub 3} was obtained using C{sub 4}mimPF{sub 6}, indicating that the crystalline phases and morphologies of the products were significantly influenced by fluoride source and reaction media.

  5. Spectroscopic properties and amplified spontaneous emission of fluorescein laser dye in ionic liquids as green media

    NASA Astrophysics Data System (ADS)

    AL-Aqmar, Dalal M.; Abdelkader, H. I.; Abou Kana, Maram T. H.

    2015-09-01

    The use of ionic liquids (ILs) as milieu materials for laser dyes is a promising field and quite competitive with volatile organic solvents and solid state-dye laser systems. This paper investigates some photo-physical parameters of fluorescein dye incorporated into ionic liquids; 1-Butyl-3-methylimidazolium chloride (BMIM Cl), 1-Butyl-3-methylimidazolium tetrachloroaluminate (BMIM AlCl4) and 1-Butyl-3-methylimidazolium tetrafluoroborate (BMIM BF4) as promising host matrix in addition to ethanol as reference. These parameters are: absorption and emission cross-sections, fluorescence lifetime and quantum yield, in addition to the transition dipole moment, the attenuation length and oscillator strength were also investigated. Lasing characteristics such as amplified spontaneous emission (ASE), the gain, and the photostability of fluorescein laser dye dissolved in different host materials were assessed. The composition and properties of the matrix of ILs were found that it has great interest in optimizing the laser performance and photostability of the investigated laser dye. Under transverse pumping of fluorescein dye by blue laser diode (450 nm) of (400 mW), the initial ASE for dye dissolved in BMIM AlCl4 and ethanol were decreased to 39% and 36% respectively as time progressed 132 min. Relatively high efficiency and high fluorescence quantum yield (11.8% and 0.82% respectively) were obtained with good photostability in case of fluorescein in BMIM BF4 that was decreased to ∼56% of the initial ASE after continuously pumping with 400 mW for 132 min.

  6. Effect of the physicochemical properties of binary ionic liquids on lipase activity and stability.

    PubMed

    Yao, Peipei; Yu, Xinxin; Huang, Xirong

    2015-01-01

    In the present study, the lipase-catalyzed hydrolysis of p-nitrophenyl butyrate is used as a model reaction to determine the activity and stability of Candida rugosa lipase in binary ionic liquids (ILs). The binary ILs consist of hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF6) and a small amount of hydrophilic 1-butyl-3-methylimidazolium nitrate ([Bmim]NO3) or 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim]CF3SO3) or 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4). The activity and the stability of lipase are first correlated with the physicochemical properties of the binary ILs. In the three binary IL systems, both the hydrophilicity and the polarity of the systems increase with the increase of the content of hydrophilic ILs (HILs). At a fixed concentration of HIL, they vary in a descending order of [Bmim]PF6/[Bmim]NO3>[Bmim]PF6/[Bmim]CF3SO3>[Bmim]PF6/[Bmim]BF4. This order is in contrast with the order of the lipase conformation stability, i.e., the higher the polarity of ILs, the more unstable the lipase conformation. However, both the activity and the stability of lipase depend on the type and the content of the HIL in binary ILs, showing a complex dependency. Analysis shows that the catalytic performance of lipase in the binary ILs is affected not only by the direct influence of the ILs on lipase conformation, but also through their indirect influence on the physicochemical properties of water. The present study helps to explore binary IL mixtures suitable for lipase-based biocatalysis.

  7. NITROSATION OF ARYL AND HETEROARYLTRIFLUOROBORATES WITH NITROSONIUM TETRAFLUOROBORATE

    PubMed Central

    Cavalcanti, Livia N.

    2012-01-01

    Organotrifluoroborates have emerged as an alternative to toxic and air- and moisture sensitive organometallic species for the synthesis of functionalized aryl and heteroaryl compounds. It has been shown that the trifluoroborate moiety can be easily converted into a variety of different substituents in a late synthetic stage. In this paper we disclose a mild, selective, and convenient method for the ipso-nitrosation of organotrifluoroborates using nitrosonium tetrafluoroborate (NOBF4). Aryl- and heteroaryltrifluoroborates were converted into the corresponding nitroso products in good to excellent yields. This method proved to be tolerant of a broad range of functional groups. PMID:22524190

  8. Tris(acetonitrile)chloropalladium tetrafluoroborate synthesis, application and structural analysis

    NASA Astrophysics Data System (ADS)

    Dybała, Izabela; Demchuk, Oleg M.

    2016-10-01

    Results of the single crystal X-ray diffraction analysis of tris(acetonitrile)chloropalladium tetrafluoroborate [PdCl(CH3CN)3]BF4 are presented in details. It was found that the title compound crystallises in the monoclinic system, in the space group C2/c. The role of charge-assisted C-HṡṡṡF-B interactions in crystal architecture was investigated. Due to its untypical properties the prepared [PdCl(CH3CN)3]BF4 has proved to be an excellent palladium source in the synthesis of phosphine-palladium complexes.

  9. Tetrapyrazineplatinum(II) bis(tetrafluoroborate) acetonitrile hemisolvate

    SciTech Connect

    Derry, Paul J.; Wang, Xiaoping; Smucker, Bradley W.

    2008-01-01

    The improved synthesis and characterization of tetrapyrazineplatinum(II) bis(tetrafluoroborate) acetonitrile hemisolvate, [Pt(C4H4N2)4](BF4)2 0.5CH3CN, is reported. The unit cell contains a half equivalent of an acetonitrile solvent molecule per tetrapyrazineplatinum(II) ion. The coordination geometry of the PtII ion is almost square-planar, with the Pt atom residing on an inversion center. The BF4- counter-anion, located at a general position, has an idealized tetrahedral geometry and an acetonitrile solvent molecule, the methyl group of which is disordered over two equal positions, sits on a twofold rotation axis.

  10. Synthesis of Novel Flower-Like Zn(OH)F via a Microwave-Assisted Ionic Liquid Route and Transformation into Nanoporous ZnO by Heat Treatment

    PubMed Central

    2009-01-01

    Zinc hydroxide fluoride (Zn(OH)F) with novel flower-like morphology has been prepared via a microwave-assisted ionic liquid route. The flower-like Zn(OH)F particle has six petals and every petal is composed of lots of acicular nano-structure. Nanoporous ZnO is obtained by thermal decomposition of as-prepared Zn(OH)F in air, and the flower-like morphology is well retained. In the process of synthesis, ionic liquid 1-Butyl-3-methylimidazolium tetrafluoroborate is used as both the reactant and the template. PMID:20651922

  11. Synthesis of Novel Flower-Like Zn(OH)F via a Microwave-Assisted Ionic Liquid Route and Transformation into Nanoporous ZnO by Heat Treatment

    NASA Astrophysics Data System (ADS)

    Song, Jia-Kui; Zheng, Ming-Bo; Yang, Zhen-Jiang; Chen, Hui-Qin; Wang, Hai-Yan; Liu, Jin-Song; Ji, Guang-Bin; Zhang, Hai-Qian; Cao, Jie-Ming

    2009-12-01

    Zinc hydroxide fluoride (Zn(OH)F) with novel flower-like morphology has been prepared via a microwave-assisted ionic liquid route. The flower-like Zn(OH)F particle has six petals and every petal is composed of lots of acicular nano-structure. Nanoporous ZnO is obtained by thermal decomposition of as-prepared Zn(OH)F in air, and the flower-like morphology is well retained. In the process of synthesis, ionic liquid 1-Butyl-3-methylimidazolium tetrafluoroborate is used as both the reactant and the template.

  12. Low-temperature dielectric relaxation in ferroelectric pyridinium tetrafluoroborate

    NASA Astrophysics Data System (ADS)

    Shin, H. K.

    2015-09-01

    The dielectric behavior of polycrystalline pyridinium tetrafluoroborate, C5NH6BF4, has been investigated in detail at temperatures in the range of 120 K ≤ T ≤ 280 K and frequencies in the range of 10 Hz ≤ ν ≤ 105 Hz. The marked dielectric dispersion observed at temperatures below 205 K was analyzed by using the sum of two different relaxation processes. The temperature dependence of the relaxation time for the main one with dominant strength revealed an excellent fit to the Arrhenius equation with an activation energy E = 2702 ± 6 K and a pre-exponential factor τ0 = 2.2 × 10-11 s. The coupled reorienting motion of the pyridinium cation and the BF4 anion is suggested to account for the main process. The relaxation time for the other weak process also obeys the Arrhenius law with E = 815±14 K and τ0 = 7.9×10-5 s. The origin of the weak process is ascribed to the ferroelectric domain-wall motion.

  13. Understanding chemical reactions of CO{sub 2} and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: The case of CS{sub 2} in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations

    SciTech Connect

    Cabaço, M. Isabel; Besnard, Marcel; Danten, Yann; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J.; Coutinho, João A. P.

    2014-06-28

    NMR spectroscopy ({sup 1}H, {sup 13}C, {sup 15}N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS{sub 2} leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH{sub 3}COS{sup −}), CO{sub 2}, OCS, and trithiocarbonate (CS{sub 3}{sup 2−}). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro]{sup +} cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS{sub 2}-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO{sub 2}-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS{sub 2} reacts with the acetate anion leading to the formation of CH{sub 3}COS{sup −}, CO{sub 2}, and OCS. After these reactions have proceeded the nascent CO{sub 2} and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO{sub 2}) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO{sub 2}-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO{sub 2} molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO{sub 2}, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS{sub 2} is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2)

  14. Understanding chemical reactions of CO2 and its isoelectronic molecules with 1-butyl-3-methylimidazolium acetate by changing the nature of the cation: the case of CS2 in 1-butyl-1-methylpyrrolidinium acetate studied by NMR spectroscopy and density functional theory calculations.

    PubMed

    Cabaço, M Isabel; Besnard, Marcel; Chávez, Fabián Vaca; Pinaud, Noël; Sebastião, Pedro J; Coutinho, João A P; Danten, Yann

    2014-06-28

    NMR spectroscopy ((1)H, (13)C, (15)N) shows that carbon disulfide reacts spontaneously with 1-butyl-1-methylpyrrolidinium acetate ([BmPyrro][Ac]) in the liquid phase. It is found that the acetate anions play an important role in conditioning chemical reactions with CS2 leading, via coupled complex reactions, to the degradation of this molecule to form thioacetate anion (CH3COS(-)), CO2, OCS, and trithiocarbonate (CS3 (2-)). In marked contrast, the cation does not lead to the formation of any adducts allowing to conclude that, at most, its role consists in assisting indirectly these reactions. The choice of the [BmPyrro](+) cation in the present study allows disentangling the role of the anion and the cation in the reactions. As a consequence, the ensemble of results already reported on CS2-[Bmim][Ac] (1), OCS-[Bmim][Ac] (2), and CO2-[Bmim][Ac] (3) systems can be consistently rationalized. It is argued that in system (1) both anion and cation play a role. The CS2 reacts with the acetate anion leading to the formation of CH3COS(-), CO2, and OCS. After these reactions have proceeded the nascent CO2 and OCS interact with the cation to form imidazolium-carboxylate ([Bmim] CO2) and imidazolium-thiocarboxylate ([Bmim] COS). The same scenario also applies to system (2). In contrast, in the CO2-[Bmim] [Ac] system a concerted cooperative process between the cation, the anion, and the CO2 molecule takes place. A carbene issued from the cation reacts to form the [Bmim] CO2, whereas the proton released by the ring interacts with the anion to produce acetic acid. In all these systems, the formation of adduct resulting from the reaction between the solute molecule and the carbene species originating from the cation is expected. However, this species was only observed in systems (2) and (3). The absence of such an adduct in system (1) has been theoretically investigated using DFT calculations. The values of the energetic barrier of the reactions show that the formation of [Bmim] CS2 is unfavoured and that the anion offers a competitive reactive channel via an oxygen-sulphur exchange mechanism with the solute in systems (1) and (2).

  15. The use of CE ECL with ionic liquid for the determination of drug alkaloids and applications in human urine.

    PubMed

    Liu, Yan-Ming; Tian, Wei; Jia, Yu-Xiu; Yue, Hai-Yan

    2009-04-01

    A new approach for the determination of methylephedrine hydrochloride (ME), thebaine, codeine phosphate (CP), and acetylcodeine (AC) was established by CE-ECL with ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate). The conditions for the CE separation, ECL detection, and the effect of ionic liquid were systematically investigated. Under the optimal conditions, the four analytes were well separated within 8 min using 1-butyl-3-methylimidazolium tetrafluoroborate as additive in the electrophoretic buffer. The concentration detection limits of ME, thebaine, CP, and AC were 2.1 x 10(-8), 1.4 x 10(-7), 6.3 x 10(-8), and 3.6 x 10(-8) mol/L (S/N=3), respectively. The LOQs (S/N=10) in real human urine samples were 7.6 x 10(-7) mol/L for ME, 3.6 x 10(-6) mol/L for thebaine, 6.5 x 10(-7) mol/L for CP, and 4.6 x 10(-7) mol/L for AC, respectively. The recoveries of four alkaloids at different levels in human urine samples were between 90.0 and 103.5%. The developed method was successfully applied to the determination of four drug alkaloids in human urine samples.

  16. Dynamics of Loop 1 of Domain I in Human Serum Albumin WhenDissolved in Ionic Liquids

    SciTech Connect

    Page, Taylor; Kraut, Nadine; Page, Phillip; Baker, Gary A; Bright, Frank

    2009-01-01

    We report on the rotational reorientation dynamics associated with loop 1 of domain I within a large multidomain protein (human serum albumin, HSA) when it is dissolved in binary mixtures of ionic liquid (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), or 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6])) and distilled deionized water (ddH2O) as a function of temperature and water loading. In IL/2% ddH2O (v/v) mixtures, loop 1 of domain I is more significantly denatured in comparison to the protein dissolved in aqueous solutions containing strong chemical denaturants (e.g., 8 M guanidine HCl (Gu HCl) or urea). As water loading increases, there is evidence for progressive refolding of loop 1 of domain I followed by recoupling with domains I, II, and III in the [C4mim][BF4]/ddH2O mixtures at 20 C. Above 30% (v/v) water, where domain I appears refolded, the Ac reporter molecule s semiangle steadily decreases from 35 to 20 with increasing water loading. From the perspective of domain I in HSA, this behavior is similar to the effects of dilution from 4 to 0 M Gu HCl in aqueous solution. Overall, these results lend insight into the tangle of biocatalytic and structural/dynamical mechanisms that enzymes may undergo in ionic liquid-based systems. It will be particularly motivating to extend this work to include enzyme-attuned ionic liquids shown to improve biocatalytic performance beyond that possible in the native (predominantly aqueous) setting.

  17. Direct synthesis of silver nanoparticles in ionic liquid

    NASA Astrophysics Data System (ADS)

    Corrêa, Cíntia M.; Bizeto, Marcos A.; Camilo, Fernanda F.

    2016-05-01

    Ionic liquids have structural organization at nanoscale that can trigger the spontaneous ordering of structures in nanoscopic range. Due to this characteristic, several metal nanoparticles have been prepared in this media. In this paper, we describe the direct preparation of silver nanoparticles in the following imidazolium ionic liquids: 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, 1,2-dimethyl-3-butylimidazolium bis(trifluoromethanesulfonyl)imide, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-octyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, and in citrate tetrabutylammonium, that is an ionic liquid that acts as solvent and reducing agent at the same time. We also evaluated the morphology of the nanoparticles and the stability of the dispersions. Spherical silver nanoparticles with surface Plasmon bands in the range of 400-430 nm were produced in all the ionic liquids, with the only exception for the 1-octyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide that produced a black precipitate. The best results were obtained by using 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and citrate tetrabutylammonium ionic liquids. The former resulted in concentrated spherical silver nanoparticles dispersion (ca. 1.0 mM of Ag) with diameters ranging from 6 to 12 nm and by adding polyvinylpyrrolidone (PVP) to the dispersions they became stable for at least 1 month. The citrate tetrabutylammonium ionic liquid produced even more concentrated dispersion of spherical silver nanoparticles with diameters ranging from 2 to 6 nm. These dispersions were quite stable without the need of PVP, since the Plasmon band in the electronic absorption spectra remained unaltered for months after the preparation. The citrate tetrabutylammonium ionic liquid offers a slow kinetic for the silver nanoparticle formation as the citrate is a milder reducing agent than borohydride.

  18. The effect of water on the microstructure and properties of benzene/[bmim][AOT]/[bmim][BF4] microemulsions.

    PubMed

    Bai, Tingting; Ge, Rile; Gao, Yanan; Chai, Jinling; Slattery, John M

    2013-11-28

    In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium bis 2-ethylhexyl sulfosuccinate ([bmim][AOT]) based 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])-in-benzene reverse microemulsions are emphasized. The microemulsion aggregates have demonstrated features in common with traditional aqueous systems, such as a normal microemulsion droplet size and decreased stability due to the addition of a polar component. Dynamic light scattering (DLS) showed that the size change of microemulsion with added water depends on the loaded [bmim][BF4] content in the microemulsion: when the [bmim][BF4] content is low, the microemulsion diameter first decreases and then increases, while the size remains about the same for microemulsions with a moderate [bmim][BF4] loading and a successive increase in size was found for high-loaded [bmim][BF4] microemulsions. (1)H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) revealed that water molecules formed wide interactions with both 1-butyl-3-methylimidazolium ([bmim]) and bis 2-ethylhexyl sulfosuccinate ([AOT]), leading to a decrease in the headgroup area of [bmim][AOT], i.e. α value, which will decrease the microemulsion size. On the other hand, addition of water can simultaneously swell the microemulsions, causing an increase in the diameter. It is also deduced that the Coulomb forces between the [AOT] and [bmim] should be one of the main driving forces for the formation of [bmim][BF4]-in-benzene microemulsions.

  19. The phytotoxicity of ionic liquids from natural pool of (-)-menthol with tetrafluoroborate anion.

    PubMed

    Biczak, Robert; Pawłowska, Barbara; Feder-Kubis, Joanna

    2015-08-01

    Over the last several decades, ionic liquids have become a promising alternative to conventional organic solvents. Initially, ionic liquids were described as "environmentally friendly" substances. However, the results of numerous studies proved that the effects of these compounds on individual ecosystems might be adverse. The presented paper discusses the effect of ionic salts containing natural chiral substituent: (1R,2S,5R)-(-)-menthol in cation and a tetrafluoroborate anion of a general formula of [Cn-Im-Men][BF4] of implementation into the soil on the growth of spring barley and common radish in their early development stages. The obtained results showed that the greatest phytotoxicity was exhibited by ionic liquids containing substituents with the smallest possible number of carbon atoms. The further increase in the length of the chain did not increase the toxicity of these salts for terrestrial plants. Moreover, a compound with a substituent having a chain length of 11 carbon atoms was found to be non-toxic to common radish. The experiment under discussion showed also the effect of these tetrafluoroborates, used in the form of spray, on the development of common sorrel, gallant soldier and white goosefoot. The tests carried out also showed that the most toxic were the compounds with 1 and 3 carbon atoms. The phytotoxicity of tetrafluoroborates was positively correlated with the concentration of these compounds in the soil and was dependent on the genetic features of the genres and varieties of plants used in the experiment.

  20. Mixed ionic liquid as electrolyte for lithium batteries

    NASA Astrophysics Data System (ADS)

    Diaw, M.; Chagnes, A.; Carré, B.; Willmann, P.; Lemordant, D.

    Ionic liquids like 1-butyl-3-methylimidazolium tetrafluoroborate (IMIBF 4) or hexafluorophosphate (IMIPF 6) and 1-butyl-4-methylpyridinium tetrafluoroborate (PyBF 4) were mixed with organic solvents such as butyrolactone (BL) and acetonitrile (ACN). A lithium salt (LiBF 4 or LiPF 6) was added to these mixtures for possible application in the field of energy storage (batteries or supercapacitors). Viscosities, conductivities and electrochemical windows at a Pt electrode of these electrolytes were investigated. All studied electrolytes are stable toward oxidation and exhibit a vitreous phase transition, which has been determined by application of the VTF theory to conductivity measurements. Mixtures containing the BF 4- anion exhibit the lowest viscosity and the highest conductivity. Two mixtures have been optimized in terms of conductivity: BL/IMIBF 4 (60/40, v/v) and ACN/IMIBF 4 (70/30, v/v).

  1. Morphology-controlled synthesis of nanostructured zinc hydroxide fluoride via a microwave-assisted ionic liquid route

    NASA Astrophysics Data System (ADS)

    Zhang, Songtao; Zheng, Mingbo; Song, Jiakui; Li, Nianwu; Lu, Hongling; Cao, Jieming

    2014-12-01

    Zinc hydroxide fluoride (Zn(OH)F) with multiform morphologies such as flower-like particles, pumpkin-like aggregates, and hollow orange-like aggregates are prepared by a microwave-assisted ionic liquid method. During synthesis, microwave irradiation accelerates the reaction rate and shortens the reaction time. 1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) or 1-2-hydroxylethyl-3-methylimidazolium tetrafluoroborate ([C2OHmim][BF4]) is used as both reactant and template. Experimental results indicate that the morphology evolution of Zn(OH)F is mainly controlled by the concentration of zinc acetate solution. A possible mechanism underlying the formation of nanostructured Zn(OH)F with diverse morphologies is proposed. Furthermore, nanoporous ZnO is obtained by the thermal decomposition of as-prepared Zn(OH)F in air, and the morphology is well retained.

  2. Ionic liquids for improving the extraction of NSAIDs in water samples using dispersive liquid-liquid microextraction by high performance liquid chromatography-diode array-fluorescence detection.

    PubMed

    Toledo-Neira, Carla; Álvarez-Lueje, Alejandro

    2015-03-01

    A rapid, sensitive and efficient analytical method based on the use of ionic liquids for determination of non-steroidal anti-inflammatory drugs (NSAIDs) in water samples was developed. High-performance liquid chromatography equipped with a diode array and fluorescence detector was used for quantification of ketoprofen, ibuprofen and diclofenac in tap and river water samples. This new method relies on the use of two ionic liquids with multiple functionalities: one functions as an extraction solvent (1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), and the other changes the polarity in the aqueous medium (1-butyl-3-methylimidazolium tetrafluoroborate, ([BMIM][BF4]). Factors such as the type and volume of the ILs and dispersive solvent, sample volume, and centrifugation time were investigated and optimized. The optimized method exhibited good precision, with relative standard deviation values between 2% and 3%, for the three NSAIDs. Limits of detection achieved for all of the analytes were between 17 and 95 ng mL(-1), and the recoveries ranged from 89% to 103%. Furthermore, the enrichment factors ranged from 49 to 57. The proposed method was successfully applied to the analysis of NSAIDs in tap and river water samples.

  3. Screening of lignan patterns in Schisandra species using ultrasonic assisted temperature switch ionic liquid microextraction followed by UPLC-MS/MS analysis.

    PubMed

    Dong, Wei; Yu, Shuijing; Deng, Yangwu; Pan, Tao

    2016-01-01

    The ultrasonic assisted temperature-switch ionic liquid microextraction (UATS-ILME) has been successfully applied in extracting of seven lignans from Schisandra. 1-Butyl-3-methylimidazolium tetrafluoroborate ([C4MIM][BF4]) aqueous solution was selected for extracting the target analytes in raw material at 80°C. The lignans were deposited into a single drop by in situ forming 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) by cooling down to 0°C and centrifuging for 10min. The extracts were analyzed by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) in a robust multiple-reaction monitoring (MRM) mode in five minutes. Meanwhile, the proposed method was validated and successfully applied to the determination of seven lignans in twelve Schisandra species. The results indicated that UATS-ILME combined with UPLC-MS/MS is a powerful and practical tool, which has great potential for comprehensive quality control of herbal medicines.

  4. Determination of atenolol in human plasma using ionic-liquid-based ultrasound-assisted in situ solvent formation microextraction followed by high-performance liquid chromatography.

    PubMed

    Zeeb, Mohsen; Farahani, Hadi; Papan, Mohammad Kazem

    2016-06-01

    An efficient analytical method called ionic-liquid-based ultrasound-assisted in situ solvent formation microextraction followed by high-performance liquid chromatography was developed for the determination of atenolol in human plasma. A hydrophobic ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) was formed by the addition of a hydrophilic ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) to a sample solution containing an ion-pairing agent during microextraction. The analyte was extracted into the ionic liquid phase while the microextraction solvent was dispersed throughout the sample by utilizing ultrasound. The sample was then centrifuged, and the extracting phase retracted into the microsyringe and injected to liquid chromatography. After optimization, the calibration curve showed linearity in the range of 2-750 ng/mL with the regression coefficient corresponding to 0.998. The limits of detection (S/N = 3) and quantification (S/N = 10) were 0.5 and 2 ng/mL, respectively. A reasonable relative recovery range of 90-96.7% and satisfactory intra-assay (4.8-5.1%, n = 6) and interassay (5.0-5.6%, n = 9) precision along with a substantial sample clean-up demonstrated good performance of the procedure. It was applied for the determination of atenolol in human plasma after oral administration and some pharmacokinetic data were obtained.

  5. Investigation of binary and ternary systems of ionic liquids with water and/or supercritical CO2 by in situ attenuated total reflection infrared spectroscopy.

    PubMed

    Andanson, Jean-Michel; Jutz, Fabian; Baiker, Alfons

    2010-02-18

    Two commonly used ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]), as well as binary and ternary mixtures of them with water and/or supercritical CO(2) (scCO(2)) were investigated by means of infrared spectroscopy at high pressure. The experiments were performed using attenuated total reflection (ATR) infrared spectroscopy on dry and wet ILs at 40 degrees C and pressures up to 150 bar of scCO(2). The studies indicate that the content of water does not change significantly the solubility of CO(2) in the ionic liquids tested. Furthermore, the presence of water does not change significantly the interaction between the IL anion and CO(2), which explains why the presence of water in IL does not modify the solubility of CO(2) in the system, even in the case of an initial molar ratio of approximately 50/50 of water in [bmim][BF(4)]. We show that despite the limited solubility of water in supercritical CO(2) an ionic liquid can be efficiently dried using scCO(2) extraction even in the case of a hydrophilic ionic liquid (e.g., [bmim][BF(4)]). During the scCO(2) extraction, the concentration of water was followed in situ using attenuated total reflection (ATR) infrared spectroscopy. After extraction, no residual water could be detected by this technique, which corresponds approximately to a water concentration of below 320 ppm.

  6. The vapour of imidazolium-based ionic liquids: a mass spectrometry study.

    PubMed

    Deyko, A; Lovelock, K R J; Licence, P; Jones, R G

    2011-10-06

    Eight common dialkylimidazolium-based ionic liquids have been successfully evaporated in ultra-high vacuum and their vapours analysed by line of sight mass spectrometry using electron ionisation. The ionic liquids investigated were 1-alkyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]imide, [C(n)C(1)Im][Tf(2)N] (where n = 2, 4, 6, 8), 1-alkyl-3-methylimidazolium tetrafluoroborate, [C(n)C(1)Im][BF(4)] (where n = 4, 8), 1-butyl-3-methylimidazolium octylsulfate, [C(4)C(1)Im][C(8)OSO(3)] and 1-butyl-3-methylimidazolium tetrachloroferrate, [C(4)C(1)Im][FeCl(4)]. All ionic liquids studied here evaporated as neutral ion pairs; no evidence of decomposition products in the vapour phase were observed. Key fragment cations of the ionised vapour of the ionic liquids are identified. The appearance energies, E(app), of the parent cation were measured and used to estimate the ionisation energies, E(i), for the vapour phase neutral ion pairs. Measured ionisation energies ranged from 10.5 eV to 13.0 eV. Using both the identity and E(app) values, the fragmentation pathways for a number of fragment cations are postulated. It will be shown that the enthalpy of vaporisation, Δ(vap)H, can successfully be measured using more than one fragment cation, although caution is required as many fragment cations can also be formed by ionisation of decomposition products.

  7. Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids.

    PubMed

    Ha, Sung Ho; Mai, Ngoc Lan; Koo, Yoon-Mo

    2010-12-03

    Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.

  8. A nonaqueous lyotropic liquid crystal fabricated by a polyoxyethylene amphiphile in protic ionic liquid.

    PubMed

    Ma, Fumin; Chen, Xiao; Zhao, Yurong; Wang, Xudong; Li, Qiuhong; Lv, Chao; Yue, Xiu

    2010-06-01

    The aggregation behaviors of oleyl polyoxyethylene (10) ether, Brij 97, in room temperature ionic liquids, ethylammonium nitrate (EAN), pyrrolidinium nitrate ([Pyrr][NO(3)]), ethylammonium butyrate (EAB), 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF(6)]), and 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), have been investigated. Only in the Brij 97/EAN binary system is the hexagonal liquid crystalline phase formed, and its ordering is found to decrease with increasing temperature. The lattice spacing values measured from the small-angle X-ray scattering (SAXS) shrink with reduction of ionic liquid content at room temperature. The general rules for aggregate formation in these ionic liquids are discussed and compared with that in water. A degraded ability to produce the ordered self-assembly of Brij 97 from H(2)O to EAN to [Bmim][PF(6)], [Bmim][BF(4)], [Pyrr][NO(3)], and EAB is found and analyzed based on the molecular packing and Gordon parameters and also hydrogen-bonding or solvophobic interactions. Steady-shear rheological measurements combined with the frequency sweep data indicate the highly viscoelastic nature of this liquid crystalline phase.

  9. Determining diffusion coefficients of ionic liquids by means of field cycling nuclear magnetic resonance relaxometry.

    PubMed

    Kruk, D; Meier, R; Rachocki, A; Korpała, A; Singh, R K; Rössler, E A

    2014-06-28

    Field Cycling Nuclear Magnetic Resonance (FC NMR) relaxation studies are reported for three ionic liquids: 1-ethyl-3- methylimidazolium thiocyanate (EMIM-SCN, 220-258 K), 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4, 243-318 K), and 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6, 258-323 K). The dispersion of (1)H spin-lattice relaxation rate R1(ω) is measured in the frequency range of 10 kHz-20 MHz, and the studies are complemented by (19)F spin-lattice relaxation measurements on BMIM-PF6 in the corresponding frequency range. From the (1)H relaxation results self-diffusion coefficients for the cation in EMIM-SCN, BMIM-BF4, and BMIM-PF6 are determined. This is done by performing an analysis considering all relevant intra- and intermolecular relaxation contributions to the (1)H spin-lattice relaxation as well as by benefiting from the universal low-frequency dispersion law characteristic of Fickian diffusion which yields, at low frequencies, a linear dependence of R1 on square root of frequency. From the (19)F relaxation both anion and cation diffusion coefficients are determined for BMIM-PF6. The diffusion coefficients obtained from FC NMR relaxometry are in good agreement with results reported from pulsed- field-gradient NMR. This shows that NMR relaxometry can be considered as an alternative route of determining diffusion coefficients of both cations and anions in ionic liquids.

  10. Copper-Promoted Trifluoromethanesulfonylation and Trifluoromethylation of Arenediazonium Tetrafluoroborates with NaSO2CF3.

    PubMed

    Zhang, Ke; Xu, Xiu-Hua; Qing, Feng-Ling

    2015-08-07

    A tunable chemoselective trifluoromethanesulfonylation and trifluoromethylation of arenediazonium tetrafluoroborates with Langlois' reagent (NaSO2CF3) was developed. The Cu2O-catalyzed reaction in DMSO gave aryl trifluoromethanesulfones as the major products. On the other hand, the trifluoromethylated arenes were produced in the presence of oxidant tert-butyl hydroperoxide, CuBF4(MeCN)4, and 2,2';6',2″-terpyridine (tpy). Both of these transformations proceed under mild conditions and tolerate functional groups.

  11. A simple, enaminone-based approach to some bicyclic pyridazinium tetrafluoroborates

    PubMed Central

    Josefík, František; Svobodová, Markéta; Bertolasi, Valerio

    2013-01-01

    Summary Easily obtainable cyclic enaminones (piperidin-2-ylidenealkanones) can be transformed into substituted bicyclic pyridazinium tetrafluoroborates upon treatment with corresponding diazonium salts. The transformation can be performed either in a one-pot way or in a two-step process with the isolation of single azo-coupled enaminone as the intermediate. The former method is superior. Under the optimized conditions, a number of pyridazinium salts substituted with both electron-donating and electron-withdrawing substituents was easily synthesized. A mechanism of the formation of the pyridazinium salts is suggested. A partial drawback is the possibility of the formation of a mixture of products when using a different diazonium salt in each step due to a reversibility of the azo coupling. This can be suppressed by using a more reactive diazonium salt before a less reactive one. PMID:23946844

  12. TiO2 nanoparticles: low-temperature hydrothermal synthesis in ionic liquids/water and the photocatalytic degradation for o-nitrophenol.

    PubMed

    Dai, Jingtao; He, Ruiyu; Yuan, Yuan; Wang, Wei; Fanga, Dong

    2014-01-01

    The well-crystallized anatase TiO2-IL nanoparticles were synthesized by one-step routes under low-temperature using room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate as an additional solvent with water. The photocatalytic properties of TiO2 nanoparticles were evaluated by photocatalytic degradation experiments of o-nitrophenol. The TiO2 nanoparticles show a higher photocatalytic activity than the TiO2 with pure water and commercial TiO2 (P25), which may be related to the high crystallinity. The TiO2-IL nanoparticles still hold a high photocatalytic activity after the catalyst was recycled nine times. Chemical oxygen demand removal was achieved under optimum experimental conditions.

  13. Poly(ethylene oxide) Mushrooms Adsorbed at Silica-Ionic Liquid Interfaces Reduce Friction.

    PubMed

    Sweeney, James; Webber, Grant B; Atkin, Rob

    2016-03-01

    The adsorbed layer conformation and lubricity of 35, 100, and 300 kDa PEO adsorbed to ionic liquid (IL)-silica interfaces from 0.01 wt % solutions have been investigated using colloid probe atomic force microscopy. The ILs used were propylammonium nitrate (PAN) and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), which are protic and aprotic ILs, respectively. Normal force curves reveal steric interactions consistent with adsorbed polymer layers which are best fit using the mushroom model. Friction measurements show that the adsorbed polymer layer markedly reduces friction compared to surfaces sliding in the pure ILs and that lubricity increases with polymer length. When polymer is adsorbed to the sliding surfaces, friction is controlled by the creation and disruption of intermolecular interactions between entangled chains and the dragging of polymer chains through the interpenetration region. These experiments show that added polymer can reduce friction while maintaining the useful properties of ILs as lubricants.

  14. Salting-out effects in aqueous ionic liquid solutions: cloud-point temperature shifts.

    PubMed

    Trindade, Joana R; Visak, Zoran P; Blesic, Marijana; Marrucho, Isabel M; Coutinho, João A P; Lopes, José N Canongia; Rebelo, Luis P N

    2007-05-10

    The effects of the addition of three inorganic salts, namely, NaCl, Na(2)SO(4), and Na(3)PO(4), on the liquid-liquid (L-L) phase diagram of aqueous solutions containing the model ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF(4)], were investigated. All three inorganic salts trigger salting-out effects, leading to significant upward shifts of the L-L demixing temperatures of the systems. The magnitude of the shifts depends on both the water-structuring nature of the salt and its concentration; that is, the effects are correlated with the ionic strength of the solution and the Gibbs free energy of hydration of the inorganic salt. The pH effect and the occurrence of salt precipitation in concentrated solutions are also discussed.

  15. Dynamics of solvation and rotational relaxation of Coumarin 153 in ionic liquid confined nanometer-sized microemulsions.

    PubMed

    Chakrabarty, Debdeep; Seth, Debabrata; Chakraborty, Anjan; Sarkar, Nilmoni

    2005-03-31

    The effects of confinement of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate on solvation dynamics and rotational relaxation of Coumarin 153 (C-153) in Triton X-100/cyclohexane microemulsions have been explored using steady-state and picosecond time-resolved emission spectroscopy. The steady-state and rotational relaxation data indicate that C-153 molecules are incorporated in the core of the microemulsions. The average rotational relaxation time increases with increase in w ([bmim][BF(4)]/[TX-100]) values. The solvent relaxation in the core of the microemulsion occurs on two different time scales and is almost insensitive to the increase in w values. The solvent relaxation is retarded in the pool of the microemulsions compared to the neat solvent. Though, the retardation is very small compared to several-fold retardation of the solvation time of the conventional solvent inside the pool of the microemulsions.

  16. Microregion detection of ionic liquid microemulsions.

    PubMed

    Gao, Yanan; Wang, Suqing; Zheng, Liqiang; Han, Shuaibing; Zhang, Xuan; Lu, Deming; Yu, Li; Ji, Yongqiang; Zhang, Gaoyong

    2006-09-15

    Nonaqueous ionic liquid (IL) microemulsion consisting of IL, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), surfactant TX-100, and toluene was prepared and the phase behavior of the ternary system was investigated. Electrical conductivity measurement was used for investigating the microregions of the nonaqueous IL microemulsions. On the basis of the percolation theory, the bmimBF(4)-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF(4) (O/IL) microregions of the microemulsions were successfully identified using insulative toluene as the titration phase. However, this method was invalid when conductive bmimBF(4) acted as the titration phase. The microregions obtained by conductivity measurements were further proved by electrochemical cyclic voltammetry experiments. The results indicated that the conductivity method was feasible for identifying microstructures of the nonaqueous IL microemulsions.

  17. Nacre-like calcium carbonate controlled by ionic liquid/graphene oxide composite template.

    PubMed

    Yao, Chengli; Xie, Anjian; Shen, Yuhua; Zhu, Jinmiao; Li, Hongying

    2015-06-01

    Nacre-like calcium carbonate nanostructures have been mediated by an ionic liquid (IL)-graphene oxide (GO) composite template. The resultant crystals were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray powder diffractometry (XRD). The results showed that either 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4) or graphene oxide can act as a soft template for calcium carbonate formation with unusual morphologies. Based on the time-dependent morphology changes of calcium carbonate particles, it is concluded that nacre-like calcium carbonate nanostructures can be formed gradually utilizing [BMIM]BF4/GO composite template. During the process of calcium carbonate formation, [BMIM]BF4 acted not only as solvents but also as morphology templates for the fabrication of calcium carbonate materials with nacre-like morphology. Based on the observations, the possible mechanisms were also discussed.

  18. Molecular dynamics simulation of the behaviour of water in nano-confined ionic liquid-water mixtures

    NASA Astrophysics Data System (ADS)

    Docampo-Álvarez, B.; Gómez-González, V.; Montes-Campos, H.; Otero-Mato, J. M.; Méndez-Morales, T.; Cabeza, O.; Gallego, L. J.; Lynden-Bell, R. M.; Ivaništšev, V. B.; Fedorov, M. V.; Varela, L. M.

    2016-11-01

    This work describes the behaviour of water molecules in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid under nanoconfinement, between graphene sheets. By means of molecular dynamics simulations, the adsorption of water molecules at the graphene surface is studied. A depletion of water molecules in the vicinity of the neutral and negatively charged graphene surfaces, and their adsorption at the positively charged surface are observed in line with the preferential hydration of the ionic liquid anions. The findings are appropriately described using a two-level statistical model. The confinement effect on the structure and dynamics of the mixtures is thoroughly analyzed using the density and the potential of mean force profiles, as well as by the vibrational densities of the states of water molecules near the graphene surface. The orientation of water molecules and the water-induced structural transitions in the layer closest to the graphene surface are also discussed.

  19. A comparative study on the ionic liquid [bmim][BF 4] and its solution with transient absorption spectroscopy

    NASA Astrophysics Data System (ADS)

    Zhu, Guanglai; Wu, Guozhong; Xu, Xinsheng; Ji, Xuehan

    2011-11-01

    A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF 4]) with its solution in water or acetonitrile. It was concluded that the excited triplet state 3[bmim] +* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] rad and the cation radical [bmim] 2+rad were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF 4] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF 4] and β-carotene further affirmed the existence of 3[bmim] +*. And the reaction that the hydrated electron captured by [bmim] + to produce [bmim] rad in solution was observed.

  20. Solution Growth of a Novel Nonlinear Optical Material: L-Histidine Tetrafluoroborate

    NASA Technical Reports Server (NTRS)

    Aggarwal, M. D.; Choi, J.; Wang, W. S.; Bhat, K.; Lal, R. B.; Shields, Angela D.; Penn, Benjamin G.; Frazier, Donald O.

    1998-01-01

    Single crystals of L-Histidine tetrafluoroborate (L-HFB), a semiorganic nonlinear optical (NLO) material have been successfully grown by the temperature lowering and evaporation methods in our laboratory. Solubility curves of L-HFB have been determined in different solvents, such as water, ethanol and acetone. The solubility of L-HFB is very low in acetone, and ethanol, therefore, it is not feasible to grow L-HFB single crystals using these solvents. Good quality single crystals of a novel nonlinear optical material L-HFB have been grown from aqueous solution. Effects of seed orientation on morphologies of L-HFB crystals were studied. The advantages and disadvantage of both the evaporation and the temperature lowering techniques are compared. The single crystals in size 20 x 20 x 10 cubic mm were grown with deionized water as solvent in two weeks with an approximate growth rate of 1.4mm/day. The transmission range for these crystals has been found to be from 250 nm to 1500 nm.

  1. Selective quenching of 2-naphtholate fluorescence by imidazolium ionic liquids.

    PubMed

    Kumar, Vinod; Pandey, Siddharth

    2012-10-04

    The effect of addition of water-miscible ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([bmim][OTf]), and 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate ([bmpyrr][OTf]), on photophysical properties of 2-naphthol in water at various pHs is reported. Electronic absorbance behavior of 2-naphthol dissolved in aqueous mixtures of ILs is observed to be similar to that found in water at different pHs. The excited-state properties, however, are changed dramatically as the IL is added to the milieu. The presence of imidazolium IL results in significant quenching of the fluorescence emission from 2-naphtholate. On the contrary, pyrrolidinium IL does not quench the fluorescence from the anionic species. The quenching of 2-naphtholate fluorescence by aromatic imidazolium cations in aqueous IL mixtures is found to follow simple Stern-Volmer behavior. The aromatic imidazolium cation acts as an electron/charge acceptor during the quenching process where formation of a weakly fluorescent complex between the imidazolium cation and the excited 2-naphtholate anion possibly involving the acidic C2 proton of imidazolium is proposed. Because of the absence of such an acidic proton, the nonaromatic pyrrolidinium cation is not able to form a complex with the excited 2-naphtholate and cannot act as an electron/charge acceptor. Excited-state emission intensity decay data further corroborate this hypothesis as the intensity decay fits well to a single-exponential decay with no change in recovered lifetimes as [bmpyrr][OTf] is added; a double-exponential decay is required to satisfactorily fit the decay data in the presence of [bmim][BF(4)], hinting at the presence of a weakly fluorescent complex. The uniqueness of ILs in affecting excited-state properties of the 2-naphthol system is demonstrated through comparison with NaBF(4), NaCl, and polyethylene glycol with an average molecular weight of

  2. Dynamic phase change and local structures in IL-containing mixtures: classical MD simulations and experiments.

    PubMed

    Wu, Yang; Wang, Xia; Liu, Qiaozhen; Ma, Xiaoxue; Fang, Dawei; Jiang, Xuefei; Guan, Wei

    2017-01-25

    The dynamic phase change between a homogeneous mixture and a liquid-liquid biphase and separation of phases are explored in three-component mixtures composed of 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]), and water through a classical simulation method and experiment. Different experimental and theoretical tools, including density measurement, dynamic light scattering study, radial distribution, mean square displacement, an interstice model, and statistical function, are used to describe the structural modifications of the ions as a function of solution concentration. An analysis of the relation between the phase and the state of the component ions indicates that the phase separation pattern is governed by the hydrophilicity/hydrophobicity of anions. We proposed the existence of a critical point, that is, 1 : 3 : 8 for [Bmim][PF6]/[Bmim][BF4]/H2O (mole fraction). Before this critical point, obvious phase separation was seen in the mixtures. The separation phase became homogeneous with the addition of [Bmim][BF4] after this critical point. However, this homogeneous mixed solution was phase separated again upon the addition of [Bmim][PF6] or water. The existing nanostructures were present in the [Bmim][PF6]/[Bmim][BF4]/H2O mixtures, and their size abruptly decreased close to the critical point. We provided evidence of the formation of double salt ionic liquids of [Bmim][PF6]0.25[BF4]0.75·2H2O and discussed the interactions involved in these systems by examining their physicochemical properties. The ionic phase response of such three-component mixtures could be useful in various applications, especially in the dynamic control of extraction/separation processing.

  3. Reactions of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We found that starches are found to be soluble at 80 ºC in ionic liquids such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-butyl-3-methylimidazolium dicyanamide (BMIMdca) in concentration up to 10% (w/w). Higher concentrations of biopolymers in these novel solvents resulted in solutions w...

  4. Catalysis of the carbonylation of olefins by the cationic chromium complexes allyl(arene)dicarbonylchromium(I) tetrafluoroborates

    SciTech Connect

    Magomedov, G.K.I.; Morozova, L.V.; Sigachev, S.A.; Krivykh, V.V.; Taits, E.S.; Rybinskaya, M.I.

    1986-11-10

    A qualitative comparison of the catalytic activities of the title complexes and cobalt carbonyl showed that (arene)allyldicarbonylchromium(I) tetrafluoroborates are more active than cobalt carbonyl, and this applies particularly to (C/sub 6/H/sub 6/Cr(CO)/sub 2/..pi..-C/sub 3/H/sub 5/)/sup +/BF/sub 4/. The possibility is not ruled out that in the course of the synthesis the acid HBF/sub 4/ is generated, and this is known to be a catalyst for the Koch reaction, but in this reaction only secondary and tertiary carboxy derivatives, i.e., only products of addition in accordance with the Markovnikov rule, are formed. In view of these results the authors investigated the activity of the title complexes in the hydroformylation process, an important industrial method for the preparation of aldehydes and alcohols.

  5. Pore-size dependent effects on structure and vibrations of 1-ethyl-3-methylimidazolium tetrafluoroborate in nanoporous carbon

    NASA Astrophysics Data System (ADS)

    Thürmer, Stephan; Kobayashi, Yoshikazu; Ohba, Tomonori; Kanoh, Hirofumi

    2015-09-01

    We report XRD and IR measurements of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMI-BF4) adsorbed in activated carbons, molecular sieving carbon, and single wall carbon nanohorn, where we specifically chose a wide range of pore sizes from 0.5 nm to 2.5 nm. Electron radial distribution function analysis reveals denser packing upon adsorption in two steps, for pore widths larger and comparable to the ion size. Average ion-distance was decreased by 0.05 nm in the latter case. With support of DFT calculations we identify a suppression of specific vibrational modes, which are interpreted as constrainment by the pore walls. Possible consequences for supercapacitor application are discussed.

  6. On the interfacial behavior of ionic liquids: surface tensions and contact angles.

    PubMed

    Restolho, José; Mata, José L; Saramago, Benilde

    2009-12-01

    In this work the liquid/vapour and the solid/liquid interfaces of a series of ionic liquids: 1-ethyl-3-methylpyridinium ethyl sulfate, [EMPy][EtSO4], 1-ethyl-3-methylimidazolium ethyl sulfate, [EMIM][EtSO4], 1-ethanol-3-methylimidazolium tetrafluoroborate, [C2OHMIM][BF4], 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF4], and 1-octyl-3-methylimidazolium tetrafluoroborate, [OMIM][BF4], were investigated. The surface tension was measured in a wide temperature range, (298-453) K. The contact angles were determined on substrates of different polarities. Both on the polar (glass) and the non-polar substrates ((poly-(tetrafluoroethylene) and poly-(ethylene)), the liquids with maximum and minimum surface tensions lead, respectively, to the highest and the lowest contact angles. The dispersive, gamma(L)(d), and non-dispersive, gamma(L)(nd), components of the liquid surface tension, gamma(L), were calculated from the contact angles on the non-polar substrates using the Fowkes approach. The polarity fraction, gamma(L)(nd)/gamma(L), was compared with the polarity parameter, k, obtained from the fitting of the surface tension vs. temperature data to the Eötvös equation. Good agreement was found for the extreme cases: [OMIM][BF4] exhibits the lowest polarity and [BMIM][BF4], the highest. When compared with the polarity fractions of standard liquids considered as "polar" liquids, the ionic liquids studied may be considered as moderately polar.

  7. Photochemical synthesis of silver particles in Tween 20/water/ionic liquid microemulsions.

    PubMed

    Harada, Masafumi; Kimura, Yoshifumi; Saijo, Kenji; Ogawa, Tetsuya; Isoda, Seiji

    2009-11-15

    Metal particles of silver (Ag) were synthesized by the photoreduction of silver perchlorate (AgClO(4)) in water-in-ionic liquid (ILs) microemulsions consisting of Tween 20, water and ionic liquids. The ILs were tetrafluoroborate anions associated with the cations 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF(4)]) and 1-octyl-3-methylimidazolium tetrafluoroborate ([OMIm][BF(4)]). The time evolution of Ag particle formation by photoreduction using UV-irradiation was investigated by UV-Vis, cryo-TEM, extended X-ray absorption fine structure (EXAFS) and small angle X-ray scattering (SAXS) measurements. The average diameter of the metallic Ag particles prepared in the water-in-[BMIm][BF(4)] and water-in-[OMIm][BF(4)] microemulsions was estimated from TEM to be 8.9 and 4.9nm, respectively, which was consistent with that obtained from the SAXS analysis. Using Guinier plots in a low q-range (<0.16nm(-1)), we demonstrate that the average diameter of the water droplets that consisted of aggregates of ionic precursors of AgClO(4) before reduction and Ag particles after reduction, in the microemulsions, was estimated to be about 20-40nm. The diameter of the water droplets increased as a function of photoreduction time because of the formation of Ag particles and their aggregates. EXAFS analysis indicated that Ag(+) ions were completely reduced to Ag(0) atoms during the photoreduction, followed by the formation of larger Ag particles.

  8. Thermodynamic and transport properties of spiro-(1,1')-bipyrrolidinium tetrafluoroborate and acetonitrile mixtures: A molecular dynamics study

    NASA Astrophysics Data System (ADS)

    Qing-Yin, Zhang; Peng, Xie; Xin, Wang; Xue-Wen, Yu; Zhi-Qiang, Shi; Shi-Huai, Zhao

    2016-06-01

    Organic salts such as spiro-(1,1')-bipyrrolidinium tetrafluoroborate ([SBP][BF4]) dissolved in liquid acetonitrile (ACN) are a new kind of organic salt solution, which is expected to be used as an electrolyte in electrical double layer capacitors (EDLCs). To explore the physicochemical properties of the solution, an all-atom force field is established on the basis of AMBER parameter values and quantum mechanical calculations. Molecular dynamics (MD) simulations are carried out to explore the liquid structure and physicochemical properties of [SBP][BF4] electrolyte at room temperature. The computed thermodynamic and transport properties match the available experimental results very well. The microscopic structures of [SBP][BF4] salt solution are also discussed in detail. The method used in this work provides an efficient way of predicting the properties of organic salt solvent as an electrolyte in EDLCs. Project supported by the National Natural Science Foundation of China (Grant Nos. 21476172 and 51172160), the National High Technology Research and Development Program of China (Grant No. 2013AA050905), and the Natural Science Foundation of Tianjin, China (Grant Nos. 12JCZDJC28400, 14RCHZGX00859, 14JCTPJC00484, and 14JCQNJC07200).

  9. Spiro-(1,1‧)-bipyrrolidinium tetrafluoroborate salt as high voltage electrolyte for electric double layer capacitors

    NASA Astrophysics Data System (ADS)

    Yu, Xuewen; Ruan, Dianbo; Wu, Changcheng; Wang, Jing; Shi, Zhiqiang

    2014-11-01

    A novel quaternary ammonium salt based on spiro-(1,1‧)-bipyrolidinium tetrafluoroborate (SBP-BF4) has been synthesized and dissolved in propylene carbonate (PC) with 1.5 mol L-1 (M) concentration for electric double-layer capacitors (EDLCs). The physic-chemical properties and electrochemical performance of SBP-BF4/PC electrolyte are investigated. Compared with the standard electrolyte 1.5 M TEMA-BF4 in PC, the novel SBP-BF4/PC electrolyte exhibited much better electrochemical performance due to its smaller cation size, lower viscosity and higher conductivity. The specific discharge capacitance of activated carbon electrode based EDLCs using SBP-BF4/PC electrolyte is 120 F g-1, the energy density and power density can reach 31 kW kg-1 and 6938 W kg-1, respectively, when the working voltage is 2.7 V and current density is 50 mA g-1. The withstand voltage of activated carbon based EDLCs with SBP-BF4/PC electrolyte can reach to 3.2 V, where the stable discharge capacitance and energy density are 121 F g-1 and 43 Wh kg-1, respectively.

  10. Electrochemical performance of microporous and mesoporous activated carbons in neat and diluted 1-ethyl-3-methylimidazolium tetrafluoroborate

    NASA Astrophysics Data System (ADS)

    Kumagai, Seiji; Hatomi, Masaki; Tashima, Daisuke

    2017-03-01

    1-Ethyl-3-methylimidazolium tetrafluoroborate (EMIm·BF4), neat and diluted with propylene carbonate to 1 mol L-1, have been employed as electrolytes of electrical double-layer capacitors (EDLCs). The effects of microporosity and mesoporosity in activated carbon (AC) electrodes on the capacitive and resistive performances upon the use of neat and diluted EMIm·BF4 have been explored. In addition to cyclic voltammetry and galvanostatic charge-discharge tests, electrochemical impedance spectroscopy has been performed employing Kang's equivalent circuit model consisting of three resistances, three constant phase elements, and one bounded Warburg impedance. The overall impedance of the EDLC cell was separated into components of intrinsic resistance, bulk electrolyte, diffusion layer, and Helmholtz layer. The specific capacitance and the equivalent series resistance (ESR) of mesoporous AC were found to be highly dependent on the rate of ionic transfer. Lower cell voltage was identified as being responsible for lower specific capacitance and larger ESR of mesoporous AC, which was similarly seen in the neat and diluted EMIm·BF4, and could be alleviated by increasing the cell voltage. The inferior rate performance and the cell-voltage-dependent performance of mesoporous AC, which were more distinctly observed in the neat EMIm·BF4, could be attributed to the lower mobility of EMIm+ and BF4- in mesopores.

  11. SEM Observation of Hydrous Superabsorbent Polymer Pretreated with Room-Temperature Ionic Liquids

    PubMed Central

    Tsuda, Tetsuya; Mochizuki, Eiko; Kishida, Shoko; Iwasaki, Kazuki; Tsunashima, Katsuhiko; Kuwabata, Susumu

    2014-01-01

    Room-temperature ionic liquid (RTIL), which is a liquid salt at or below room temperature, shows peculiar physicochemical properties such as negligible vapor pressure and relatively-high ionic conductivity. In this investigation, we used six types of RTILs as a liquid material in the pretreatment process for scanning electron microscope (SEM) observation of hydrous superabsorbent polymer (SAP) particles. Very clear SEM images of the hydrous SAP particles were obtained if the neat RTILs were used for the pretreatment process. Of them, tri-n-butylmethylphosphonium dimethylphosphate ([P4, 4, 4, 1][DMP]) provided the best result. On the other hand, the surface morphology of the hydrous SAP particles pretreated with 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) was damaged. The results of SEM observation and thermogravimetry analysis of the hydrous SAP pretreated with the RTILs strongly suggested that most water in the SAP particles are replaced with RTIL during the pretreatment process. PMID:24621609

  12. Molecular dynamics simulation of the structure and interfacial free energy barriers of mixtures of ionic liquids and divalent salts near a graphene wall.

    PubMed

    Gómez-González, Víctor; Docampo-Álvarez, Borja; Méndez-Morales, Trinidad; Cabeza, Oscar; Ivaništšev, Vladislav B; Fedorov, Maxim V; Gallego, Luis J; Varela, Luis M

    2016-12-21

    A molecular dynamics study of mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) with magnesium tetrafluoroborate (Mg[BF4]2) confined between two parallel graphene walls is reported. The structure of the system is analyzed by means of ionic density profiles, lateral structure of the first layer close to the graphene surface and angular orientations of imidazolium cations. Free energy profiles for divalent magnesium cations are calculated using two different methods in order to evaluate the height of the potential barriers near the walls, and the results are compared with those of mixtures of the same ionic liquid and a lithium salt (Li[BF4]). Preferential adsorption of magnesium cations is analyzed using a simple model and compared to that of lithium cations, and vibrational densities of states are calculated for the cations close to the walls analyzing the influence of the graphene surface charge. Our results indicate that magnesium cations next to the graphene wall have a roughly similar environment to that in the bulk. Moreover, they face higher potential barriers and are less adsorbed on the charged graphene walls than lithium cations. In other words, magnesium cations have a more stable solvation shell than lithium ones.

  13. SEM observation of hydrous superabsorbent polymer pretreated with room-temperature ionic liquids.

    PubMed

    Tsuda, Tetsuya; Mochizuki, Eiko; Kishida, Shoko; Iwasaki, Kazuki; Tsunashima, Katsuhiko; Kuwabata, Susumu

    2014-01-01

    Room-temperature ionic liquid (RTIL), which is a liquid salt at or below room temperature, shows peculiar physicochemical properties such as negligible vapor pressure and relatively-high ionic conductivity. In this investigation, we used six types of RTILs as a liquid material in the pretreatment process for scanning electron microscope (SEM) observation of hydrous superabsorbent polymer (SAP) particles. Very clear SEM images of the hydrous SAP particles were obtained if the neat RTILs were used for the pretreatment process. Of them, tri-n-butylmethylphosphonium dimethylphosphate ([P(4, 4, 4, 1)][DMP]) provided the best result. On the other hand, the surface morphology of the hydrous SAP particles pretreated with 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]) was damaged. The results of SEM observation and thermogravimetry analysis of the hydrous SAP pretreated with the RTILs strongly suggested that most water in the SAP particles are replaced with RTIL during the pretreatment process.

  14. Photochemical synthesis of silver particles using water-in-ionic liquid microemulsions in high-pressure CO2.

    PubMed

    Harada, Masafumi; Kawasaki, Chika; Saijo, Kenji; Demizu, Masashi; Kimura, Yoshifumi

    2010-03-15

    Silver particles (Ag particles) were synthesized by the photoreduction of silver perchlorate (AgClO(4)) in water-in-ionic liquid (IL) microemulsions consisting of nonionic surfactant Tween 20, water, and ionic liquids, [1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF(4)]) or 1-octyl-3-methylimidazolium tetrafluoroborate ([OMIm][BF(4)])], mixed with a high-pressure (25 MPa) CO(2). The time evolution of the Ag particle formation by photoreduction was investigated by UV-Vis, cryo-TEM, extended X-ray absorption fine structure (EXAFS), and small-angle X-ray scattering (SAXS) measurements. In the particle formation process, aggregation and precipitation of Ag particles were suppressed under high-pressure CO(2). The average diameters of the metallic Ag particles prepared in water-in-[BMIm][BF(4)] and water-in-[OMIm][BF(4)] microemulsions were estimated from TEM to be 3.2 and 3.7 nm, respectively. SAXS analysis shows that the average diameters of the water droplets, which consisted of ionic precursors of AgClO(4) and Ag particles (or Ag aggregates), were estimated to be about 30-40 nm. In the process of Ag particle formation, the water droplet size under high-pressure CO(2) is more effectively regulated than that under ambient air, thereby preventing Ag particles from aggregating and precipitating.

  15. Effects of ionic liquid as additive and the pH of the mobile phase on the retention factors of amino benzoic acids in RP-HPLC.

    PubMed

    Zheng, J; Polyakova, Y; Row, K H

    2007-01-01

    As an organic salt, ionic liquids are widely used as new solvent media. In this paper, three positional isomers, such as o-amino benzoic acid, m-amino benzoic acid, and p-amino benzoic acid are separated with four different ionic liquids as additives to the mobile phase using reversed-phase (RP) high-performance liquid chromatography (HPLC). Amino benzoic acids are biologically active substances; the p-isomer is present in a group of water-soluble vitamins and is widely known as a sunscreen agent. The ionic liquids used are 1-butyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium methylsulfate, and 1-octyl-3-methylimidazolium methylsulfate. The effects of the length of the alkyl group on the imidazolium ring and its counterion, the concentrations of the ionic liquid, and the effect of the pH of the mobile phase on the retention factor of the amino benzoic acid isomers are studied. Separation with the ionic liquid in the eluent was better than the separation without the ionic liquid. The pH mainly affected the retention and elution order of the solutes in RP-HPLC.

  16. Synthesis of Cu, Zn and Cu/Zn brass alloy nanoparticles from metal amidinate precursors in ionic liquids or propylene carbonate with relevance to methanol synthesis

    NASA Astrophysics Data System (ADS)

    Schütte, Kai; Meyer, Hajo; Gemel, Christian; Barthel, Juri; Fischer, Roland A.; Janiak, Christoph

    2014-02-01

    Microwave-induced decomposition of the transition metal amidinates {[Me(C(NiPr)2)]Cu}2 (1) and [Me(C(NiPr)2)]2Zn (2) in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) or in propylene carbonate (PC) gives copper and zinc nanoparticles which are stable in the absence of capping ligands (surfactants) for more than six weeks. Co-decomposition of 1 and 2 yields the intermetallic nano-brass phases β-CuZn and γ-Cu3Zn depending on the chosen molar ratios of the precursors. Nanoparticles were characterized by high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), dynamic light scattering and powder X-ray diffractometry. Microstructure characterizations were complemented by STEM with spatially resolved energy-dispersive X-ray spectrometry and X-ray photoelectron spectroscopy. Synthesis in ILs yields significantly smaller nanoparticles than in PC. β-CuZn alloy nanoparticles are precursors to catalysts for methanol synthesis from the synthesis gas H2/CO/CO2 with a productivity of 10.7 mol(MeOH) (kg(Cu) h)-1.Microwave-induced decomposition of the transition metal amidinates {[Me(C(NiPr)2)]Cu}2 (1) and [Me(C(NiPr)2)]2Zn (2) in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) or in propylene carbonate (PC) gives copper and zinc nanoparticles which are stable in the absence of capping ligands (surfactants) for more than six weeks. Co-decomposition of 1 and 2 yields the intermetallic nano-brass phases β-CuZn and γ-Cu3Zn depending on the chosen molar ratios of the precursors. Nanoparticles were characterized by high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), dynamic light scattering and powder X-ray diffractometry. Microstructure characterizations were complemented by STEM with spatially resolved energy-dispersive X-ray spectrometry and X-ray photoelectron spectroscopy. Synthesis in ILs yields significantly smaller nanoparticles than in PC.

  17. Toxic effects of ionic liquid 1-octyl-3-methylimidazolium tetrafluoroborate on soil enzyme activity and soil microbial community diversity.

    PubMed

    Sun, Xi; Zhu, Lusheng; Wang, Jinhua; Wang, Jun; Su, Benying; Liu, Tong; Zhang, Cheng; Gao, Chong; Shao, Yuting

    2017-01-01

    Ionic liquids (ILs) were considered as "green" solvents and have been used widely because of their excellent properties. But ILs are not as "green" as has been suggested, and the toxic effects of ILs on organisms have been shown in recent years. In the present study, the toxic effects of the IL 1-octyl-3-methylimidazolium tetrafluoroborate ([Omim]BF4) on soil enzyme activity and soil microbial communities at three different concentrations (1.0, 5.0 and 10.0mg/kg) and a control treatment over 40 days of incubation time (sampled on days 10, 20, 30 and 40) were examined under laboratory conditions. The concentrations of [Omim]BF4 in soils were detected by high performance liquid chromatography (HPLC) and the results indicated that [Omim]BF4 were maintained stable in the soil during the exposure period. However, the enzyme activity results showed that urease activity was stimulated on day 20 and then decreased after 30 days of incubation. The activity of β-glucosidase was stimulated after 20 days of incubation in both treatment groups. Moreover, both dehydrogenase and acid phosphatase were inhibited at a high level (10.0mg/kg) only on day 20. The analysis of terminal restriction fragment length polymorphism (T-RFLP) revealed that the soil microbial community structures were altered by [Omim]BF4 and that the soil microbial diversity and evenness of high levels (5.0mg/kg and 10.0mg/kg) treatments were decreased. Moreover, the dominant structure of the microbial communities was not changed by [Omim]BF4. Furthermore, the abundance of the ammonia monooxygenase (amoA) genes of both ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) was examined using real time polymerase chain reaction (RT-PCR). The results revealed that the copy numbers of the amoA-gene were decreased by [Omim]BF4 with the 5.0 and 10.0mg/kg treatments. Based on the experiment, we concluded that high levels (5.0 and 10.0mg/kg) of [Omim]BF4 could have significantly toxic effects on soil

  18. Novel microemulsions: ionic liquid-in-ionic liquid.

    PubMed

    Cheng, Siqing; Zhang, Jianling; Zhang, Zhaofu; Han, Buxing

    2007-06-28

    The hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) can be dispersed in hydrophilic IL propylammonium formate (PAF) with the aid of surfactant AOT, and [bmim][PF(6)]-in-PAF microemulsions are formed.

  19. Recent highlights in electrophilic fluorination with 1-chloromethyl-4-fluoro- 1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate).

    PubMed

    Singh, Rajendra P; Shreeve, Jean'ne M

    2004-01-01

    Synthetic and structural aspects of organofluorine compounds continue to be the focal points of vigorous research activities, as evidenced by the appearance of a large number of publications. Among the various useful methodologies for the introduction of fluorine into organic molecules, electrophilic fluorination is a promising and exciting area of research. While a variety of electrophilic fluorinating reagents are available, currently 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor) provides a remarkably straightforward and effective route. The breadth of applications realizable from this reagent in its role as a key electrophilic fluorinating reagent is highlighted here. This Account covers the literature for electrophilic fluorination reactions that employ Selectfluor during the period January 1999-January 2003.

  20. Ultrasound-mediated synthesis of 4-substituted 1,4-dihydropyridine-3,5-dicarboxylates catalyzed by 1-carboxymethyl-3-methylimidazolium tetrafluoroborate under solvent free condition.

    PubMed

    He, Jing-Yu; Jia, Hui-Zhen; Yao, Qing-Guo; Liu, Si-Jie; Yue, Hong-Kun; Yu, Hong-Wei; Hu, Rui-Sheng

    2015-01-01

    4-Substituted 1,4-dihydropyridine-3,5-dicarboxylates (4) have been synthesized by the solvent-free reaction of aldehyde, methyl propiolate and ammonium carbonate catalyzed by ionic liquid 1-carboxymethyl-3-methylimidazolium tetrafluoroborate under ultrasonic irradiation. The effects of changes in the ultrasonic power, temperature, catalysts and reactants on the synthesis of 4-substituted 1,4-dihydropyridine-3,5-dicarboxylates (4) are discussed. With the optimized reaction conditions, various aldehydes were used to synthesize 1,4-dihydropyridines (4) under the influence of ultrasound irradiation. Compared with the conventional thermal methods, the remarkable advantages of this method are the simple experimental procedure, shorter reaction time (2-10min) and high yield of product (76-95%). Furthermore, the green catalytic system can be recycled specific times without significantly decreasing the yields and reaction rates.

  1. Synthesis, spectral analysis and quantum chemical studies on molecular geometry, chemical reactivity of 7-chloro-9-(2‧-chlorophenyl)-2,3-dihydroacridin-4(1H)-one and 7-chloro-9-(2‧-fluorophenyl)-2,3-dihydroacridin-4(1H)-one

    NASA Astrophysics Data System (ADS)

    Satheeshkumar, Rajendran; Sayin, Koray; Kaminsky, Werner; Rajendra Prasad, Karnam Jayarampillai

    2017-01-01

    7-Chloro-9-(2'-chlorophenyl)-2,3-dihydroacridin-4(1H)-one (3a) and 7-chloro-9-(2'-fluorophenyl)-2,3-dihydroacridin-4-(1H)-one (3b) were synthesized from 2-amino-2‧,5-dichlorobenzophenone (1a) and 2-amino-5-chloro-2'-fluorobenzophenone (1b) respectively with 1,2-cyclohexanedione (2) in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate and InCl3 condition. The synthesized compounds have been recorded of FT-IR, NMR spectra and the structure was further confirmed by using single crystal X-ray diffraction. The synthesized compounds have been further checked the photo physical properties like UV, emission and fluorescent quantum yields were calculated. FT-NMR spectra and 1H and 13C NMR chemical shifts have been measured and computational calculations of compounds 3 are done by using B3LYP method with 6-311G basis set in gas phase. Similarly calculated vibrational frequencies were found in good agreement with experimental findings. The optimized geometry of molecules 3 was compared with experimental XRD values. DFT calculations of the molecular electrostatic potential (MEP) and HOMO - LUMO frontier orbitals identified chemically active sites of compounds 3 responsible for its chemical reactivity.

  2. Facile fabrication of a novel anisotropic gold nanoparticle-chitosan-ionic liquid/graphene modified electrode for the determination of theophylline and caffeine.

    PubMed

    Yang, Guangming; Zhao, Faqiong; Zeng, Baizhao

    2014-09-01

    In the present study, a suspension solution containing anisotropic gold nanoparticle (GNP), chitosan (CHIT) and ionic liquid (IL, i.e. 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF4]), is prepared by reducing HAuCl4 with sodium citrate in CHIT-IL aqueous solution. The hybrid solution is coated on a graphene (r-GO) modified glassy carbon electrode to construct an electrochemical sensor for the determination of theophylline (TP) and caffeine (CAF). The obtained hybrid film shows rough surface, and anisotropic GNPs are well dispersed on it. The factors concerning this assay strategy are carefully investigated, including the components of the hybrid film, the concentrations of r-GO, HAuCl4 and IL, and the pH of buffer solution. Under the optimized conditions, the linear response ranges are 2.50×10(-8)-2.10×10(-6) mol L(-1) and 2.50×10(-8)-2.49×10(-6) mol L(-1) for TP and CAF, respectively; the detection limits are 1.32×10(-9) mol L(-1) and 4.42×10(-9) mol L(-1), respectively. The electrochemical sensor shows good reproducibility, stability and selectivity, and it has been successfully applied to the determination of TP and CAF in real samples.

  3. ILs-based microwave-assisted extraction coupled with aqueous two-phase for the extraction of useful compounds from Chinese medicine.

    PubMed

    Lin, Xiao; Wang, Yuzhi; Liu, Xiaojie; Huang, Songyun; Zeng, Qun

    2012-09-07

    Ionic liquids-based microwave-assisted extraction (ILs-MAE) of medicinal or useful compounds from plants was investigated as an alternative to conventional organic solvent extractions. The extraction and the preconcentration of aqueous two-phase (ATP) systems have been integrated. Various operating parameters were systematically considered by single-factor and L(9) (3(4)) orthogonal array experiments. 1-Butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) has been selected to extract Apocynum venetum. The extract was then converted to the top phase by [bmim][BF(4)]/NaH(2)PO(4) system which was suitable for the preconcentration. Reversed phase high performance liquid chromatography (RP-HPLC) with ultraviolet detection was employed for the analysis of hyperin and isoquercitrin in Apocynum venetum. The optimal experiment approach could provide higher detection limit of hyperin and isoquercitrin which were 3.82 μg L(-1) and 3.00 μg L(-1) in Apocynum venetum. The recoveries of hyperin and isoquercitrin were 97.29% (RSD = 1.02%) and 99.40% (RSD = 1.13%), respectively, from aqueous samples of Apocynum venetum by the proposed method. Moreover, the extraction mechanism of ILs-MAE and the microstructures and chemical structures of the herb before and after extraction were also investigated. The method exhibited potential applicability with other complicated samples.

  4. Hydrogen-bonding interactions between [BMIM][BF4] and acetonitrile.

    PubMed

    Zheng, Yan-Zhen; Wang, Nan-Nan; Luo, Jun-Jie; Zhou, Yu; Yu, Zhi-Wu

    2013-11-07

    In this work, the interactions between a representative imidazolium-based ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) and acetonitrile (CH3CN) were investigated in detail using attenuated total reflection infrared spectroscopy (ATR-IR), hydrogen nuclear magnetic resonance ((1)H NMR), and density functional theory calculations. The main conclusions are: (1) a number of species in the [BMIM][BF4]-CH3CN mixtures were identified with the help of excess infrared spectroscopy and quantum chemical calculations. The dilution process of the ionic liquid by acetonitrile was found to be the transformation from ion clusters to ion pairs. (2) The solvent molecules cannot break apart the strong Coulombic interaction between [BMIM](+) and [BF4](-) but can break apart the ion cluster into an ion pair within the concentration range investigated. The strength of hydrogen bonds between the C-Hs of [BMIM](+) and the N of acetonitrile is enhanced during the dilution process. (3) The methyl group of CH3CN locates above/below the imidazolium ring in the solution. These in-depth studies on the properties of the ionic liquid-acetonitrile mixed solvents may shed light on exploring their applications as reaction media in electrochemistry and chemical synthesis.

  5. Ionic liquid assisted chemical strategy to TiO2 hollow nanocube assemblies with surface-fluorination and nitridation and high energy crystal facet exposure for enhanced photocatalysis.

    PubMed

    Yu, Shengli; Liu, Baocang; Wang, Qin; Gao, Yuxi; Shi, Ying; Feng, Xue; An, Xiaoting; Liu, Lixia; Zhang, Jun

    2014-07-09

    Realization of anionic nonmetal doping and high energy crystal facet exposure in TiO2 photocatalysts has been proven to be an effective approach for significantly improving their photocatalytic performance. A facile strategy of ionic liquid assisted etching chemistry by simply hydrothermally etching hollow TiO2 spheres composed of TiO2 nanoparticles with an ionic liquid of 1-butyl-3-methylimidazolium tetrafluoroborate without any other additives is developed to create highly active anatase TiO2 nanocubes and TiO2 nanocube assemblies. With this one-pot ionic liquid assisted etching process, the surface-fluorination and nitridation and high energy {001} crystal facets exposure can be readily realized simultaneously. Compared with the benchmark materials of P25 and TiO2 nanostructures with other hierarchical architectures of hollow spheres, flaky spheres, and spindles synthesized by hydrothermally etching hollow TiO2 spheres with nonionic liquid of NH4F, the TiO2 nanocubes and TiO2 nanocube assemblies used as efficient photocatalysts show super high photocatalytic activity for degradation of methylene blue, methyl orange, and rhodamine B, due to their surface-fluorination and nitridation and high energy crystal facet exposure. The ionic liquid assisted etching chemistry is facile and robust and may be a general strategy for synthesizing other metal oxides with high energy crystal facets and surface doping for improving photocatalytic activity.

  6. Ionic liquid-based aqueous two-phase system extraction of sulfonamides in milk.

    PubMed

    Shao, Mingyuan; Zhang, Xuli; Li, Na; Shi, Jiayuan; Zhang, Huijie; Wang, Zhibing; Zhang, Hanqi; Yu, Aimin; Yu, Yong

    2014-06-15

    A simple method for the determination of six sulfonamides (SAs) in milk samples was developed. 1-Butyl-3-methylimidazolium tetrafluoroborate and trisodium citrate dihydrate were used to form aqueous two-phase system. The aqueous two phase system was applied to the extraction of the SAs and the determination of the analytes was performed by high-performance liquid chromatography. To achieve optimum extraction performance, several experimental parameters, including the type and the amount of salt, the type and amount of ionic liquid, ultrasonic time and pH of sample solution, were investigated and optimized. Under the optimal experimental conditions, good linearity was observed in the range of 8.55-1036.36ngmL(-1). The limits of detection and quantification were in the range of 2.04-2.84 and 6.73-9.37ngmL(-1), respectively. The present method was successfully applied to the determination of SAs in milk samples, and the recoveries of analytes were in the range of 72.32-108.96% with relative standard deviations ranging from 0.56 to 12.20%. The results showed that the present method was rapid, feasible and environmentally friendly.

  7. Preparation of metallic pivot-based imprinted monolith for polar template.

    PubMed

    Zhong, Dan-Dan; Huang, Yan-Ping; Xin, Xue-Lei; Liu, Zhao-Sheng; Aisa, Haji Akber

    2013-09-01

    One of the main challenges in MIPs preparation is the proper MIP monolith design for water-soluble compounds due to the difficulty in satisfying the demands of both good column permeability and affinity to polar template. A new strategy of metallic pivot in a ternary porogenic system of dimethyl sulfoxide (DMSO)-dimethylformamide (DMF)-1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4) was suggested to solve this problem. An imprinted monolithic column with high porosity and good permeability was synthesized using a mixture of methyl gallate (template), 4-vinylpyridine, ethylene glycol dimethacrylate, and cobalt acetate. Some polymerization factors, such as template-monomer molar ratio and the composition of the ionic liquid, on the imprinting effect of the resulting MIPs monoliths were systematically investigated. In a mobile phase of acetonitrile-buffer, the greatest imprinting factor of 10.9 was obtained on the MIPs monolith with the optimized polymerization parameters. Thermodynamic analysis for separation demonstrated that the separation between the template and its analogs on the ion-mediated MIPs monolith is an enthalpy-controlled process.

  8. Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier.

    PubMed

    Tian, Kan; Qi, Shengda; Cheng, Yuqiao; Chen, Xingguo; Hu, Zhide

    2005-06-17

    In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.

  9. Salting-out homogenous extraction followed by ionic liquid/ionic liquid liquid-liquid micro-extraction for determination of sulfonamides in blood by high performance liquid chromatography.

    PubMed

    Liu, Zhongling; Yu, Wei; Zhang, Hanqi; Gu, Fanbin; Jin, Xiangqun

    2016-12-01

    Salting-out homogenous extraction followed by ionic liquid/ionic liquid dispersive liquid-liquid micro-extraction system was developed and applied to the extraction of sulfonamides in blood. High-performance liquid chromatography was applied to the determination of the analytes. The blood sample was centrifuged to obtain the serum. After the proteins in the serum were removed in the presence of acetonitrile, ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, dipotassium hydrogen phosphate, ionic liquid 1-Hexyl-3-methylimidazolium hexafluorophosphate were added into the resulting solution. After the resulting mixture was ultrasonically shaken and centrifuged, the precipitate was separated. The acetonitrile was added in the precipitate and the analytes were extracted into the acetonitrile phase. The parameters affecting the extraction efficiency, such as volume of ionic liquid, amount of dipotassium hydrogen phosphate, volume of dispersant, extraction time and temperature were investigated. The limits of detection of sulfamethizole (STZ), sulfachlorpyridazine (SCP), sulfamethoxazole (SMX) and Sulfisoxazole (SSZ) were 4.78, 3.99, 5.21 and 3.77μgL(-1), respectively. When the present method was applied to the analysis of real blood samples, the recoveries of analytes ranged from 90.0% to 113.0% and relative standard deviations were lower than 7.2%.

  10. Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy.

    PubMed

    Thawarkar, Sachin; Khupse, Nageshwar D; Kumar, Anil

    2016-04-04

    Electrical conductivity (σ), viscosity (η), and self-diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium-based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate, [bmIm][BF4 ], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the (1) H NMR chemical shifts of the ionic liquids. The self-diffusion coefficients D of the cation and anion of [HmIm][CH3 COO] in D2 O and in [D6 ]DMSO are determined by using (1) H nuclei with pulsed field gradient spin-echo NMR spectroscopy.

  11. Interactions of Ionic Liquids with Uranium and its Bioreduction

    SciTech Connect

    Zhang, C.; Francis, A.

    2012-09-18

    We investigated the influence of ionic liquids (ILs) 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM]{sup +}[PF{sub 6}]{sup -}, N-ethylpyridinium trifluoroacetate [EtPy]{sup +}[CF{sub 3}COO]{sup -} and N-ethylpyridinium tetrafluoroborate [Et-Py]{sup +}[BF{sub 4}]{sup -} on uranium reduction by Clostridium sp. under anaerobic conditions. Potentiometric titration, UV-vis spectrophotometry, LC-MS and EXAFS analyses showed monodentate complexation between uranyl and BF{sub 4}{sup -} PF{sub 6}{sup -}; and bidentate complexation with CF{sub 3}COO{sup -}. Ionic liquids affected the growth of Clostridium sp. as evidenced by decrease in optical density, changes in pH, gas production, and the extent of U(VI) reduction and precipitation of U(IV) from solution. Reduction of U(VI) to U(IV) was observed in the presence of [EtPy][BF{sub 4}] and [BMIM][PF{sub 6}] but not with [EtPy][CF{sub 3}COO].

  12. Ionic liquid mediated extraction, assisted by ultrasound energy, of available/mobilizable metals from sediment samples.

    PubMed

    Álvarez, Silvana M; Llamas, Natalia E; Lista, Adriana G; Álvarez, Mónica B; Domini, Claudia E

    2017-01-01

    A new extraction method for metals from sediment samples was developed. In this procedure, the chelating agent EDTA was combined with a minimal amount of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (Bmim[BF4]), assisted by ultrasound energy. The available analytes -Cd, Cr, Cu, Ni, Pb and Zn- were extracted under optimal conditions for a 12.5 ratio (extractant volume/sample mass) with 0.005molL(-1) EDTA solution, 0.1molL(-1) NaHCO3, 5.0mmolL(-1) Bmim[BF4] and 7.0min of sonication time, using an ultrasonic bath (output power of 160W). The best extractions were obtained with 100W (power dissipated in the liquid). These conditions were obtained applying the univariate method. It is important to highlight that the conventional method (extraction with 0.05molL(-1) EDTA solution only) consumes 6h to extract available metals from sediment samples selectively, and with the proposed procedure the extraction time is noticeable reduced to 7.0min. Extractable metal concentrations obtained were measured by flame atomic absorption spectrometry. The results showed good agreement with those obtained by the conventional method using a Student's paired t-test.

  13. Effect of ionic liquid-templated mesoporous anatase TiO2 on performance of dye-sensitized solar cell

    NASA Astrophysics Data System (ADS)

    Han, C. C.; Lin, Y. P.; Ho, S. Y.; Lai, Y. C.; Chen, S. Y.; Huang, J.; Chen-Yang, Y. W.

    2010-01-01

    In this study, the mesoporous anatase TiO2, TBF4, is synthesized by sol-gel polymerization using 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] as the template. The 450 °C-calcined TBF4 is found maintaining a mesoporous structure with a morphology that benefits dye adsorption and electrolyte diffusion. A series of dye-sensitized electrodes are prepared with a combination of the as-prepared TBF4 and P25, a commercial TiO2. It is found that the short-circuit photocurrent (Jsc) and open-circuit photovoltage (Voc) of the TBF4-containing electrodes are remarkably increased with the content of TBF4. The improvement is ascribed to an increase in the amount of dye molecules adsorbed and prolongation of the electron lifetimes (τeff). The highest light-to-electricity conversion efficiency (η) of the dye-sensitized solar cell is obtained from that prepared with the pure TBF4 electrode and is about 60% higher than that prepared with the pure P25 electrode under the same condition.

  14. MD simulations of the formation of stable clusters in mixtures of alkaline salts and imidazolium-based ionic liquids.

    PubMed

    Méndez-Morales, Trinidad; Carrete, Jesús; Bouzón-Capelo, Silvia; Pérez-Rodríguez, Martín; Cabeza, Óscar; Gallego, Luis J; Varela, Luis M

    2013-03-21

    Structural and dynamical properties of room-temperature ionic liquids containing the cation 1-butyl-3-methylimidazolium ([BMIM](+)) and three different anions (hexafluorophosphate, [PF6](-), tetrafluoroborate, [BF4](-), and bis(trifluoromethylsulfonyl)imide, [NTf2](-)) doped with several molar fractions of lithium salts with a common anion at 298.15 K and 1 atm were investigated by means of molecular dynamics simulations. The effect of the size of the salt cation was also analyzed by comparing these results with those for mixtures of [BMIM][PF6] with NaPF6. Lithium/sodium solvation and ionic mobilities were analyzed via the study of radial distribution functions, coordination numbers, cage autocorrelation functions, mean-square displacements (including the analysis of both ballistic and diffusive regimes), self-diffusion coefficients of all the ionic species, velocity and current autocorrelation functions, and ionic conductivity in all the ionic liquid/salt systems. We found that lithium and sodium cations are strongly coordinated in two different positions with the anion present in the mixture. Moreover, [Li](+) and [Na](+) cations were found to form bonded-like, long-lived aggregates with the anions in their first solvation shell, which act as very stable kinetic entities within which a marked rattling motion of salt ions takes place. With very long MD simulation runs, this phenomenon is proved to be on the basis of the decrease of self-diffusion coefficients and ionic conductivities previously reported in experimental and computational results.

  15. Investigation of the local structure of mixtures of an ionic liquid with polar molecular species through molecular dynamics: cluster formation and angular distributions.

    PubMed

    Carrete, Jesús; Méndez-Morales, Trinidad; Cabeza, Óscar; Lynden-Bell, Ruth M; Gallego, Luis J; Varela, Luis M

    2012-05-24

    In this work, we used molecular dynamics simulations to analyze in detail the spatial distributions of the different constituents in mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate with three polar molecular species: water and two alcohols of different chain lengths (methanol and ethanol). In particular, we report results regarding the influence of the chosen species and its concentration on the formation of ionic and molecular clusters over the whole miscibility range, as well as on the angular distribution of polar molecules around the anion and the cation in these systems. Both analyses showed that addition of a molecular species breaks down the polar network of the pure ionic liquid in clusters whose mean size decreases progressively as more molecules are added. At very high concentrations of the molecular species, the ions are found to be isolated in mixtures with water and methanol, but they tend to form pairs in ethanol. In mixtures with water we identified large clusters that form a water network at very high water concentrations, while at low water concentrations polar molecules tend to form smaller aggregates. In contrast, in mixtures with alkanols there is no evidence of the formation of large alcohol clusters at any concentration. Spatial order in alcohol was also studied by means of the Kirkwood G factor, reaching the conclusion that the angular correlations which appear in pure alcohols due to dipole interactions are destroyed by the ionic liquid, even when present only in tiny amounts.

  16. Microwave irradiation for the facile synthesis of transition-metal nanoparticles (NPs) in ionic liquids (ILs) from metal-carbonyl precursors and Ru-, Rh-, and Ir-NP/IL dispersions as biphasic liquid-liquid hydrogenation nanocatalysts for cyclohexene.

    PubMed

    Vollmer, Christian; Redel, Engelbert; Abu-Shandi, Khalid; Thomann, Ralf; Manyar, Haresh; Hardacre, Christopher; Janiak, Christoph

    2010-03-22

    Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M-NPs) have been reproducibly obtained by facile, rapid (3 min), and energy-saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal-carbonyl precursors [M(x)(CO)(y)] in the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF(4)]). This MWI synthesis is compared to UV-photolytic (1000 W, 15 min) or conventional thermal decomposition (180-250 degrees C, 6-12 h) of [M(x)(CO)(y)] in ILs. The MWI-obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long-term stable M-NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid-liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)(-1) h(-1) and 884 (mol product) (mol Rh)(-1) h(-1) and give almost quantitative conversion within 2 h at 10 bar H(2) and 90 degrees C. Catalyst poisoning experiments with CS(2) (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru-NPs.

  17. Ionic liquid tunes microemulsion curvature.

    PubMed

    Liu, Liping; Bauduin, Pierre; Zemb, Thomas; Eastoe, Julian; Hao, Jingcheng

    2009-02-17

    Middle-phase microemulsions formed from cationic dioctadecyldimethylammonium chloride (DODMAC), anionic sodium dodecylsulfate (SDS), n-butanol, and n-heptane were studied. An ionic liquid (IL), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), was employed as the electrolyte in the aqueous media instead of inorganic salts usually used in microemulsion formulation. Studies have been carried out as a function of the concentrations of [bmim][BF4], n-butanol, total surfactant (cDODMAC+SDS), and temperature on the phase behavior and the ultralow interfacial tensions in which the anionic component is present in excess in the catanionic film. Ultralow interfacial tension measurements confirmed the formation of middle-phase microemulsions and the necessary conditions for stabilizing middle-phase microemulsions. Electrical conductivity, small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS) experiments were also performed, indicating that the typical heptane domain size has an average radius of 360 A and the ionic liquid induces softening of the charged catanionic film. Most interestingly, the IL concentration (cIL) is shown to act as an effective interfacial curvature-control parameter, representing a new approach to tuning the formulation of microemulsions and emulsions. The results expand the potential uses of ILs but also point to the design of new ILs that may achieve superefficient control over interfacial and self-assembly systems.

  18. Organic solvents induce the formation of oil-in-ionic liquid microemulsion aggregations.

    PubMed

    Gao, Yanan; Li, Na; Zhang, Shaohua; Zheng, Liqiang; Li, Xinwei; Dong, Bin; Yu, Li

    2009-02-05

    The role of four organic solvents in the formation process of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) based ionic liquid (IL) microemulsions is investigated. The results showed that the addition of Triton X-100 remarkably decreased the conductivity of bmimBF4. The added organic solvents provided a strong apolar environment for the hydrophobic tails of Triton X-100 and caused the surfactant molecules to aggregate into the interfacial film of oil-in-bmimBF4 (O/IL) microemulsions. As a result, the conductivities of the solutions were initially increased because the insulative Triton X-100 molecules were assembled, which corresponded to increasing the concentration of continuous bmimBF4 solutions. The hydrophobic interaction between the dispersed organic solvents and the hydrophobic tails of Triton X-100 may be the driving force for the formation of O/IL microemulsions. The droplets of O/IL microemulsions were successively swollen by organic solvents, and a bicontinuous IL-containing microemulsion was observed by freeze-fracture transmission electron microscopy for the first time. The current study can help in further understanding the ILs-containing microemulsions and thereby improve microemulsion theory.

  19. Nanodroplet cluster formation in ionic liquid microemulsions.

    PubMed

    Gao, Yanan; Voigt, Andreas; Hilfert, Liane; Sundmacher, Kai

    2008-08-04

    A common ionic liquid (IL), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), is used as polar solvent to induce the formation of a reverse bmimBF(4)-in-toluene IL microemulsion with the aid of the nonionic surfactant Triton X-100. The swelling process of the microemulsion droplets by increasing bmimBF(4) content is detected by dynamic light scattering (DLS), conductivity, UV/Vis spectroscopy, and freeze-fracture transmission electron microscopy (FF-TEM). The results show that the microemulsion droplets initially formed are enlarged by the addition of bmimBF(4). However, successive addition of bmimBF(4) lead to the appearance of large-sized microemulsion droplet clusters (200-400 nm). NMR spectroscopic analysis reveal that the special structures and properties of bmimBF(4) and Triton X-100 together with the polar nature of toluene contribute to the formation of such self-assemblies. These unique self-assembled structures of IL-based microemulsion droplet clusters may have some unusual and unique properties with a number of interesting possibilities for potential applications.

  20. Dielectric analysis of micelles and microemulsions formed in a hydrophilic ionic liquid. I. Interaction and percolation.

    PubMed

    Lian, Yiwei; Zhao, Kongshuang

    2011-10-06

    Dielectric measurements were carried out on binary mixtures of Triton X-100 (TX-100, a nonionic surfactant with a polyoxyethylene chain) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)], a hydrophilic ionic liquid), and [bmim][BF(4)]/TX-100/cyclohexane microemulsions in a wide frequency range to study the molecular interaction and percolation in these systems. Striking dielectric relaxations were observed, and the dc conductivity data were obtained from the measured total dielectric loss spectra. The interaction between TX-100 and [bmim][BF(4)] is estimated by analyzing the dc conductivity of TX-100/[bmim][BF(4)] solutions in light of the Bruggeman's effective medium approximation, which indicates that spherical micelles are formed when the TX-100 volume fraction is below 48% and the number of cations associated with every TX-100 molecule is eight. For IL-oil microemulsions, both the dependence of dc conductivity and the permittivity (for fixed frequency) on cyclohexane concentration were used to identify the oil-in-IL, bicontinuous, and IL-in-oil microregions. Both the conduction and dielectric relaxation behavior suggest that a static percolation occurs in this hydrophilic IL microemulsion.

  1. Temperature-induced microstructural changes in ionic liquid-based microemulsions.

    PubMed

    Gao, Yanan; Li, Na; Hilfert, Liane; Zhang, Shaohua; Zheng, Liqiang; Yu, Li

    2009-02-03

    In the present contribution, results concerning the effect of temperature on the nonionic surfactant Triton X-100 based 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane and bmimBF4-in-toluene ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) along with freeze-fracture transmission electron microscopy (FF-TEM) measurements revealed that the sizes of single microemulsion droplets increased with increasing temperature. However, a decreased temperature led to the appearance of droplet clusters, which have also been observed previously when the single microemulsion droplets were swollen by added bmimBF4 to a certain extent (Gao, Y. A.; Vogit, A.; Hilfert, L.; Sundmacher, K. ChemPhysChem, 2008, 9, 1603-1609). Compared to traditional aqueous microemulsions, IL microemulsions revealed relatively high temperature-independence. The droplet-shaped microstructure was always kept in a large range of temperature. The temperature-independence is ascribed to the temperature-insensitive electrostatic attraction between the solubilized bmimBF4 and Triton X-100, which was considered to be the driving force for solubilizing bmimBF4 into the cores of Triton X-100 aggregates. Two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further confirmed the microstructural change with temperature.

  2. Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies.

    PubMed

    Falcone, R Dario; Baruah, Bharat; Gaidamauskas, Ernestas; Rithner, Christopher D; Correa, N Mariano; Silber, Juana J; Crans, Debbie C; Levinger, Nancy E

    2011-06-06

    Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room-temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. (1)H, (11)B, and (19)F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X-100 (TX-100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim](+) and [BF(4)](-) in the presence of TX-100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim](+) and [BF(4)](-) and migration of Cl(-) within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures.

  3. Studies on the micropolarities of bmimBF4/TX-100/toluene ionic liquid microemulsions and their behaviors characterized by UV-visible spectroscopy.

    PubMed

    Li, Na; Gao, Yan'an; Zheng, Liqiang; Zhang, Jin; Yu, Li; Li, Xinwei

    2007-01-30

    Ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), were substituted for polar water and formed nonaqueous microemulsions with toluene by the aid of nonionic surfactant TX-100. The phase behavior of the ternary system was investigated, and microregions of bmimBF4-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF4 (O/IL) were identified by traditional electrical conductivity measurements. Dynamic light scattering (DLS) revealed the formation of the IL microemulsions. The micropolarities of the IL/O microemulsions were investigated by the UV-vis spectroscopy using the methyl orange (MO) and methylene blue (MB) as absorption probes. The results indicated that the polarity of the IL/O microemulsion increased only before the IL pools were formed, whereas a relatively fixed polar microenvironment was obtained in the IL pools of the microemulsions. Moreover, UV-vis spectroscopy has also shown that ionic salt compounds such as Ni(NO3)2, CoCl2, CuCl2, and biochemical reagent riboflavin could be solubilized into the IL/O microemulsion droplets, indicating that the IL/O microemulsions have potential application in the production of metallic or semiconductor nanomaterials, and in biological extractions or as solvents for enzymatic reactions. The IL/O microemulsions may have some expected effects due to the unique features of ILs and microemulsions.

  4. Optimization of Micellar Electrokinetic Chromatography Method for the Simultaneous Determination of Seven Hydrophilic and Four Lipophilic Bioactive Components in Three Salvia Species.

    PubMed

    Cao, Jiliang; Hu, Ji; Wei, Jinchao; Li, Baocai; Zhang, Mi; Xiang, Cheng; Li, Peng

    2015-08-21

    A micellar electrokinetic chromatography (MEKC) method was developed for the simultaneous determination of seven hydrophilic phenolic acids and four lipophilic tanshinones in three Salvia species. In normal MEKC mode using SDS as surfactant, the investigated 11 compounds could not be well separated. Therefore, several buffer modifiers including β-cyclodextrins (β-CD), ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF4) and organic solvents have been added to the buffer solution to improve the separation selectivity. Under the optimized conditions (BGE, 15 mM sodium tetraborate with 10 mM SDS, 5 mM β-CD, 10 mM [bmim]BF4 and 15% ACN (v/v) as additives; buffer pH, 9.8; voltage, 20 kV; temperature, 25 °C), the 11 investigated analytes could achieve baseline separation in 34 min. The proposed MEKC was additionally validated by evaluating the linearity (R(2) ≥ 0.9965), LODs (0.27-1.39 μg·mL(-1)), and recovery (94.26%-105.17%), demonstrating this method was reproducible, accurate and reliable. Moreover, the contents of the 11 compounds in three Salvia species, including S. miltiorrhiza, S. przewalskii and S. castanea were analyzed. The result showed that the established MEKC method was simple and practical for the simultaneous determination of the hydrophilic and lipophilic bioactive components in Salvia species, which could be used to effectively evaluate the quality of these valued medicinal plants.

  5. Sulfonic Acid- and Lithium Sulfonate-Grafted Poly(Vinylidene Fluoride) Electrospun Mats As Ionic Liquid Host for Electrochromic Device and Lithium-Ion Battery.

    PubMed

    Zhou, Rui; Liu, Wanshuang; Leong, Yew Wei; Xu, Jianwei; Lu, Xuehong

    2015-08-05

    Electrospun polymer nanofibrous mats loaded with ionic liquids (ILs) are promising nonvolatile electrolytes with high ionic conductivity. The large cations of ILs are, however, difficult to diffuse into solid electrodes, making them unappealing for application in some electrochemical devices. To address this issue, a new strategy is used to introduce proton conduction into an IL-based electrolyte. Poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) copolymer is functionalized with sulfonic acid through covalent attachment of taurine. The sulfonic acid-grafted P(VDF-HFP) electrospun mats consist of interconnected nanofibers, leading to remarkable improvement in dimensional stability of the mats. IL-based polymer electrolytes are prepared by immersing the modified mats in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM(+)BF4(-)). It is found that the SO3(-) groups can have Lewis acid-base interactions with the cations (BMIM(+)) of IL to promote the dissociation of ILs, and provide additional proton conduction, resulting in significantly improved ionic conductivity. Using this novel electrolyte, polyaniline-based electrochromic devices show higher transmittance contrast and faster switching behavior. Furthermore, the sulfonic acid-grafted P(VDF-HFP) electrospun mats can also be lithiated, giving additional lithium ion conduction for the IL-based electrolyte, with which Li/LiCoO2 batteries display enhanced C-rate performance.

  6. Conformational and Dynamic Properties of Poly(ethylene oxide) in an Ionic Liquid: Development and Implementation of a First-Principles Force Field.

    PubMed

    McDaniel, Jesse G; Choi, Eunsong; Son, Chang-Yun; Schmidt, J R; Yethiraj, Arun

    2016-01-14

    The conformational properties of polymers in ionic liquids are of fundamental interest but not well understood. Atomistic and coarse-grained molecular models predict qualitatively different results for the scaling of chain size with molecular weight, and experiments on dilute solutions are not available. In this work, we develop a first-principles force field for poly(ethylene oxide) (PEO) in the ionic liquid 1-butyl 3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) using symmetry adapted perturbation theory (SAPT). At temperatures above 400 K, simulations employing both the SAPT and OPLS-AA force fields predict that PEO displays ideal chain behavior, in contrast to previous simulations at lower temperature. We therefore argue that the system shows a transition from extended to more compact configurations as the temperature is increased from room temperature to the experimental lower critical solution temperature. Although polarization is shown to be important, its implicit inclusion in the OPLS-AA force is sufficient to describe the structure and energetics of the mixture. The simulations emphasize the difference between ionic liquids from typical solvents for polymers.

  7. First-Principles, Physically Motivated Force Field for the Ionic Liquid [BMIM][BF4].

    PubMed

    Choi, Eunsong; McDaniel, Jesse G; Schmidt, J R; Yethiraj, Arun

    2014-08-07

    Molecular simulations play an important role in establishing structure-property relations in complex fluids such as room-temperature ionic liquids. Classical force fields are the starting point when large systems or long times are of interest. These force fields must be not only accurate but also transferable. In this work, we report a physically motivated force field for the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) based on symmetry-adapted perturbation theory. The predictions (from molecular dynamics simulations) of the liquid density, enthalpy of vaporization, diffusion coefficients, viscosity, and conductivity are in excellent agreement with experiment, with no adjustable parameters. The explicit energy decomposition inherent in the force field enables a quantitative analysis of the important physical interactions in these systems. We find that polarization is crucial and there is little evidence of charge transfer. We also argue that the often used procedure of scaling down charges in molecular simulations of ionic liquids is unphysical for [BMIM][BF4]. Because all intermolecular interactions in the force field are parametrized from first-principles, we anticipate good transferability to other ionic liquid systems and physical conditions.

  8. Monolithic column incorporated with lanthanide metal-organic framework for capillary electrochromatography.

    PubMed

    Zhang, Li-Shun; Du, Pei-Yao; Gu, Wen; Zhao, Qing-Li; Huang, Yan-Ping; Liu, Zhao-Sheng

    2016-08-26

    A new lanthanide metal-organic frameworks NKU-1 have successfully incorporated into poly (BMA-co-EDMA) monolith and evaluated by capillary electrochromatography (CEC). Lanthanide metal-organic frameworks [Eu2(ABTC)1.5(H2O)3(DMA)] (NKU-1) were synthesized by self-assembly of Eu(III) ions and 3,3',5,5'-azo benzene tetracarboxylic acid ligands have been fabricated into poly(BMA-co-EDMA) monoliths. 1-Butyl-3-methylimidazolium tetrafluoroborate and N,N-dimethylformamide were developed as binary porogen obtaining homogeneous dispersibility for NKU-1 and high permeability for monolithic column. The successful incorporation of NKU-1 into poly(BMA-co-EDMA) was confirmed and characterized by FT-IR spectra, scanning electron microscopy, X-ray diffraction, energy dispersive spectrometer area scanning, and transmission electron microscopy. Separation ability of the NKU-1-poly (BMA-co-EDMA) monoliths was demonstrated by separating four groups of analytes in CEC, including alkylbenzenes, polycyclic aromatic hydrocarbon, aniline series and naphthyl substitutes. Compared with bare monolithic (column efficiency of 100,000plates/m), the NKU-1-poly (BMA-co-EDMA) monoliths have displayed greater column efficiency (maximum 210,000plates/m) and higher permeability, as well as less peak tailing. The results showed that the NKU-1-poly (BMA-co-EDMA) monoliths are promising stationary phases for CEC separations.

  9. Role of LiBF4 in Ionic Liquid Membranes for Facilitated CO2 Transport.

    PubMed

    Choi, Yeji; Hong, Gil Hwan; Kang, Sang Wook

    2016-03-01

    The ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM BF4)/LiBF4 electrolyte was prepared for highly selective facilitated CO2 transport membranes. When LiBF4 was incorporated into BMIM BF4, synergy effects by free Li+ ion and imidazolium cations is expected to enhance the separation performance for CO2/N2 and CO2/CH4. The free state of BF4- ions in BMIM BF4/LiBF4 solutions was investigated by FT-Raman spectroscopy. For the coordination of LiBF4 with BMIMBF4, thermal gravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) was utilized. Electrolyte membranes consisting of BMIM BF4 and LiBF4 showed selectivities of 8.40 and 8.25 for CO2/N2 and CO2/CH4, respectively. Neat BMIM BF4 membrane showed selectivities of 5.0 and 4.8, respectively. Enhanced separation performance was attributed to increased free Li+ and abundant free imidazolium cations.

  10. Thermal stability, complexing behavior, and ionic transport of polymeric gel membranes based on polymer PVdF-HFP and ionic liquid, [BMIM][BF4].

    PubMed

    Shalu; Chaurasia, S K; Singh, R K; Chandra, S

    2013-01-24

    PVdF-HFP + IL(1-butyl-3-methylimidazolium tetrafluoroborate; [BMIM][BF(4)]) polymeric gel membranes containing different amounts of ionic liquid have been synthesized and characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared (FTIR), differential scanning calorimetry, thermogravimetric analysis (TGA), and complex impedance spectroscopic techniques. Incorporation of IL in PVdF-HFP polymer changes different physicochemical properties such as melting temperature (T(m)), thermal stability, structural morphology, amorphicity, and ionic transport. It is shown by FTIR, TGA (also first derivative of TGA, "DTGA") that IL partly complexes with the polymer PVdF-HFP and partly remains dispersed in the matrix. The ionic conductivity of polymeric gel membranes has been found to increase with increasing concentration of IL and attains a maximum value of 1.6 × 10(-2) S·cm(-1) for polymer gel membrane containing 90 wt % IL at room temperature. Interestingly, the values of conductivity of membranes with 80 and 90 wt % of IL were higher than that of pure IL (100 wt %). The polymer chain breathing model has been suggested to explain it. The variation of ionic conductivity with temperature of these gel polymeric membranes follows Arrhenius type thermally activated behavior.

  11. Thermostable gel polymer electrolyte based on succinonitrile and ionic liquid for high-performance solid-state supercapacitors

    NASA Astrophysics Data System (ADS)

    Pandey, Gaind P.; Liu, Tao; Hancock, Cody; Li, Yonghui; Sun, Xiuzhi Susan; Li, Jun

    2016-10-01

    A flexible, free-standing, thermostable gel polymer electrolyte based on plastic crystalline succinonitrile (SN) and ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF4) entrapped in copolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) is prepared and optimized for application in solvent-free solid-state supercapacitors. The synthesized gel polymer electrolyte exhibits a high ionic conductivity over a wide temperature range (from ∼5 × 10-4 S cm-1 at -30 °C up to ∼1.5 × 10-2 S cm-1 at 80 °C) with good electrochemical stability window (-2.9 to 2.5 V). Thermal studies confirm that the SN containing gel polymer electrolyte remains stable in the same gel phase over a wide temperature range from -30 to 90 °C. The electric double layer capacitors (EDLCs) have been fabricated using activated carbon as active materials and new gel polymer electrolytes. Electrochemical performance of the EDLCs is assessed through cyclic voltammetry, galvanostatic charge-discharge cycling and impedance spectroscopy. The EDLC cells with the proper SN-containing gel polymer electrolyte has been found to give high specific capacitance 176 F g-1 at 0.18 A g-1 and 138 F g-1 at 8 A g-1. These solid-state EDLC cells show good cycling stability and the capability to retain ∼80% of the initial capacitance after 10,000 cycles.

  12. Green synthesis of polymer monoliths incorporated with carbon nanotubes in room temperature ionic liquid and deep eutectic solvents.

    PubMed

    Zhang, Li-Shun; Gao, Shu-Ping; Huang, Yan-Ping; Liu, Zhao-Sheng

    2016-07-01

    In this work, an efficient method to prepare polymer monoliths with incorporated carbon nanotubes in a mixture of room temperature ionic liquid and deep eutectic solvents was developed. With assistance of the binary green solvent, 1-butyl-3-methylimidazolium tetrafluoroborate and choline chloride/ethylene glycol, single-walled carbon nanotubes were dispersed successfully in pre-polymerization mixture without need of oxidative cutting of carbon nanotubes, which may allow depletion of the emission of volatile organic compounds into environment. The novel single-walled carbon nanotubes monolith was evaluated by capillary electrochromatography. Compared with the monolith made without single-walled carbon nanotubes, the monolith with the incorporation of single-walled carbon nanotubes exhibited high column efficiency (251,000plates/m) in the chromatographic separation. The morphology of the monolith can be tuned by the composition of mixture of ionic liquids and deep eutectic solvents to afford good column permeability and excellent separation ability for small molecules of alkyl phenones and alkyl benzenes. The results demonstrated that the method is a green strategy for the fabrication of multifunctional polymer monoliths.

  13. Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids

    NASA Astrophysics Data System (ADS)

    Shahid, Robina; Muhammad, Nawshad; Gonfa, Girma; Toprak, Muhammet S.; Muhammed, Mamoun

    2015-10-01

    Zinc sulfide (ZnS) quantum dots (QDs) were synthesized using the microwave assisted ionic liquid (MAIL) route. Three ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4]), trihexyl(tetradecyl) phosphonium bis(trifluoromethanesulfonyl) amide ([P6,6,6,14][TSFA]) and trihexyl(tetradecyl) phosphonium chloride ([P6,6,6,14][Cl]) were used in this study. The size and structure of the QDs were characterized by high-resolution transmission electron microscopy (HR-TEM) and selected area electron diffraction (SAED) pattern, respectively. The synthesized QDs were of wurtzite crystalline structure with size less than 5 nm. The QDs were more uniformly distributed while using the phosponium based ILs as a reaction medium during synthesis. The optical properties were investigated by UV-vis absorption and photoluminescence (PL) emission spectroscopy. The optical properties of QDs showed the quantum confinement effect in their absorption and the effect of cation and anion structural moiety was observed on their bandedge emission. The QDs emission intensity was measured higher for [P6,6,6,14][Cl] due to their better dispersion as well as high charge density of Cl anion. The capability of the ILs in stabilizing the QDs was interpreted by density functional theory (DFT) computations. The obtained results are in good agreement with the theoretical prediction.

  14. Molecular physics of electrical double layers in electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Feng, Guang

    tetraethylammonium tetrafluoroborate (TEABF4) in the aprotic solvent of acetonitrile (ACN). Firstly, the solvation of TEA+ and BF4 - ions is found to be much weaker than that of small inorganic ions. This characteristic accounts for the rich structure of EDLs near the electrodes. In particular, near charged electrodes, the ion distribution cannot be explained by the traditional EDL models. Secondly, the computed capacitances of EDLs agree well with those inferred from experimental measurements. Finally, we probed the dynamics of EDLs in organic electrolytes by analyzing the rotational dynamics of solvent and the self diffusion coefficients of ion/solvent. For the ILs, we performed the MD simulations of EDLs at the interface between an IL of 1-butyl-3-methylimidazolium nitrate ([BMIM][NO3]) and planar electrodes. The results revealed that the structure of the EDL is significantly affected by the liquid nature of the IL, the short-range ion--electrode and ion--ion interactions, and the charge delocalization of ions. We showed that the differential capacitance is a quantitative measure of the response of the EDL structure to a change of electrode surface charge density, and the concave-shaped capacitance--potential (C--V ) curve is in good agreement with that in the literature. To further acquire the theoretical understanding of EDLs in ILs, we investigated the effects of ion size and electrode curvature on the EDLs in ILs of 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]). The results indicated that the ion size considerably affects the ion distribution and orientational structure of EDLs, and the EDL capacitances follow a certain order of the ion size. It was also found that the EDL capacitance increases as the electrode curvature increases. Based on the insights gained from the EDL structure and capacitance, a "Multiple Ion Layers with Overscreening" (MILO) model was proposed for EDLs in ILs. The capacitance

  15. Effect of the structure of imidazolium cations in [BF4](-)-type ionic liquids on direct electrochemistry and electrocatalysis of horseradish peroxidase in Nafion films.

    PubMed

    Lu, Lu; Huang, Xirong; Qu, Yinbo

    2011-10-01

    The direct electrochemistry and bioelectrocatalysis of horseradish peroxidase (HRP) in Nafion films at glassy carbon electrode (GCE) was investigated in three [BF(4)](-)-type room-temperature ionic liquids (ILs) to understand the structural effect of imidazolium cations. The three ILs are 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF(4)]), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]) and 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim][BF(4)]). A small amount of water in the three ILs is indispensable for maintaining the electrochemical activity of HRP in Nafion films, and the optimum water contents decrease with the increase of alkyl chain length on imidazole ring. Analysis shows that the optimum water contents are primarily determined by the hydrophilicity of ILs used. In contrast to aqueous medium, ILs media facilitate the direct electron transfer of HRP, and the electrochemical parameters obtained in different ILs are obviously related to the nature of ILs. The direct electron transfer between HRP and GCE is a surface-confined quasi-reversible single electron transfer process. The apparent heterogeneous electron transfer rate constant decreases gradually with the increase of alkyl chain length on imidazole ring, but the changing extent is relatively small. The electrocatalytic reduction current of H(2)O(2) at the present electrode decreases obviously with the increase of alkyl chain length, and the mass transfer of H(2)O(2) via diffusion in ILs should be responsible for the change. In addition, the modified electrode has good stability and reproducibility; the ability to tolerate high levels of F(-) has been greatly enhanced due to the use of Nafion film. When an appropriate mediator is included in the sensing layer, a sensitive nonaqueous biosensor could be fabricated.

  16. Molecular dynamics simulations of the structure of the graphene-ionic liquid/alkali salt mixtures interface.

    PubMed

    Méndez-Morales, Trinidad; Carrete, Jesús; Pérez-Rodríguez, Martín; Cabeza, Óscar; Gallego, Luis J; Lynden-Bell, Ruth M; Varela, Luis M

    2014-07-14

    We performed molecular dynamics simulations of mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate with lithium tetrafluoroborate and potassium tetrafluoroborate between two charged and uncharged graphene walls, in order to analyze the structure of the well-known formation of layers that takes place on liquids under confinement. For this purpose, we studied the molecular density profiles, free energy profiles for bringing lithium and potassium cations from the bulk mixture to the graphene wall and the orientational distributions of imidazolium rings within the first adsorbed layer as a function of salt concentration and electrode potential. The charge densities in the electrodes were chosen to be zero and ±1 e nm(-2), and the salt molar percentages were %salt = 0, 10 and 25. We found that the layered structure extends up to 1-2 nm, where the bulk behaviour is recovered. In addition, whereas for the neutral surface the layers are composed of both ionic species, increasing the electrode potential, the structure changes to alternating cationic and anionic layers leading to an overcompensation of the charge of the previous layer. We also calculated the distribution of angles of imidazolium rings near neutral and charged graphene walls, finding a limited influence of the added salt. In addition, the average tilt of the imidazolium ring within the first layer goes from 36° with respect to a normal vector to the uncharged graphene wall to 62° in the presence of charged walls. The free energy profiles revealed that lithium and potassium ions are adsorbed on the negative surface only for the highest amount of salt, since the free energy barriers for approaching this electrode are considerably higher than kBT.

  17. Video-microscopic observation of ionic liquid/alcohol interface and the corresponding molecular simulation study

    NASA Astrophysics Data System (ADS)

    Zhu, Peixi

    This research is aimed at studying the ionic liquid/n-pentanol interface via video-microscopy and molecular dynamic simulations. Understanding the interfacial phenomena and interfacial transport between ionic liquids and other liquids is of interest to the development and application of ionic liquids in a number of areas. One such area is the biphasic hydroformylation of alkenes to obtain alcohol and aldehyde, in which case ionic liquid is the reaction medium where a catalyst resides. The dissolution of an ionic liquid into an alcohol was studied by microscopically observing and measuring the shrinking of a micropipette-produced droplet in real time. Although microscopic investigation of droplet dissolution has been studied before, no attempt had been made to measure the diffusion coefficient D of the droplet species in the surrounding medium. A key finding of this work is that the Epstein-Plesset mathematical model, which describes the dissolution of a droplet/bubble in another fluid medium, can be used to measure D. Other experimental studies of the ionic liquid/alcohol system include electrical conductivity and UV-visible spectroscopy measurements of solutions of 1-hexyl-3-methylimidazolium tetrafluoroborate in n-pentanol. Those experiments were done in order to understand the molecular state of the particular ionic liquid in n-pentanol, as well as obtaining the dissociation constant K of such weak electrolyte solution. The experimental results provide an entry to the assessment of ionic liquid interaction with n-pentanol at molecular scale. Subsequently, molecular dynamics simulation was implemented for the investigation of such interaction. The computation started with simulation of the bulk phase of 1-butyl-3-methylimidazolium tetrafluoroborate, an affine ionic liquid on which molecular simulations had already been reported. A generalized probability based on Fuoss approximation for the closest ion to a distinguished countercharge ion was developed. In

  18. Conductance, a contrivance to explore ion association and solvation behavior of an ionic liquid (tetrabutylphosphonium tetrafluoroborate) in acetonitrile, tetrahydrofuran, 1,3-dioxolane, and their binaries.

    PubMed

    Ekka, Deepak; Roy, Mahendra Nath

    2012-09-27

    Precise measurements on electrical conductance (Λ) of solutions of an ionic liquid (IL) tetrabutylphosphonium tetrafluoroborate in acetonitrile (ACN), tetrahydrofuran (THF), and 1,3-dioxolane (1,3-DO) and their binary mixtures have been reported at 298.15 K. The conductance data have been analyzed by the Fuoss conductance equation (1978) in terms of the limiting molar conductance (Λ(o)), the association constant (K(A)), and the association diameter (R) for ion-pair formation. The Walden product is obtained and discussed. However, the deviation of the conductometric curves (Λ versus √c) from linearity for the electrolyte in THF and 1,3-DO and their binary mixtures indicated triple-ion formation and therefore the corresponding conductance data have been analyzed by the Fuoss–Kraus theory of triple ions. The limiting ionic conductances (λ(o)(±)) have been estimated from the appropriate division of the limiting molar conductivity value of tetrabutylammonium tetraphenylborate [Bu(4)NBPh(4)] as the “reference electrolyte” method along with a numerical evaluation of ion-pair and triple-ion formation constants (K(P) ≈ K(A) and K(T)). The results have been discussed in terms of solvent properties and configurational theory. Ionic association in the limiting molar conductances as well as the single-ion conductivity values have been determined for the electrolyte in the solvent media.

  19. Analysis of Reaction between α-Lipoic Acid and 2-Chloro-1-methylquinolinium Tetrafluoroborate Used as a Precolumn Derivatization Technique in Chromatographic Determination of α-Lipoic Acid.

    PubMed

    Godlewska, Magdalena; Odachowska, Angelika; Turkowicz, Monika; Karpinska, Joanna

    2015-01-01

    The present study offers results of analysis concerning the course of reaction between reduced α-lipoic acid (LA) and 2-chloro-1-methylquinolinium tetrafluoroborate (CMQT). In water environments, the reaction between CMQT and hydrophilic thiols proceeds very rapidly and the resultant products are stable. For the described analysis, optimum reaction conditions, such as concentration of the reducing agent, environment pH, and concentration of the reagent were carefully selected. The spectrophotometric assay was carried out measuring absorbance at λ = 348 nm (i.e., the spectral band of the obtained reaction product). Furthermore, the calibration curve of lipoic acid was registered. It was concluded that the Lambert-Beer law was observed within the range 1-10 μmol L(-1). Later, the reaction between LA and CMQT was used as precolumn derivatization in a chromatographic determination of the lipoic acid in the range 2.5-50 μmol L(-1). Practical applicability of the designed methods was evaluated by determining lipoic acid in Revitanerv pharmaceutical preparation which contains 300 mg LA in a single capsule. The error of the determination did not exceed 0.5% in relation to the declared value.

  20. Analysis of Reaction between α-Lipoic Acid and 2-Chloro-1-methylquinolinium Tetrafluoroborate Used as a Precolumn Derivatization Technique in Chromatographic Determination of α-Lipoic Acid

    PubMed Central

    Godlewska, Magdalena; Odachowska, Angelika; Turkowicz, Monika; Karpinska, Joanna

    2015-01-01

    The present study offers results of analysis concerning the course of reaction between reduced α-lipoic acid (LA) and 2-chloro-1-methylquinolinium tetrafluoroborate (CMQT). In water environments, the reaction between CMQT and hydrophilic thiols proceeds very rapidly and the resultant products are stable. For the described analysis, optimum reaction conditions, such as concentration of the reducing agent, environment pH, and concentration of the reagent were carefully selected. The spectrophotometric assay was carried out measuring absorbance at λ = 348 nm (i.e., the spectral band of the obtained reaction product). Furthermore, the calibration curve of lipoic acid was registered. It was concluded that the Lambert-Beer law was observed within the range 1–10 μmol L−1. Later, the reaction between LA and CMQT was used as precolumn derivatization in a chromatographic determination of the lipoic acid in the range 2.5–50 μmol L−1. Practical applicability of the designed methods was evaluated by determining lipoic acid in Revitanerv pharmaceutical preparation which contains 300 mg LA in a single capsule. The error of the determination did not exceed 0.5% in relation to the declared value. PMID:26504616

  1. Thermodynamic behavior of the binaries 1-butylpyridinium tetrafluoroborate with water and alkanols: their interpretation using 1H NMR spectroscopy and quantum-chemistry calculations.

    PubMed

    Vreekamp, Remko; Castellano, Desire; Palomar, José; Ortega, Juan; Espiau, Fernando; Fernández, Luís; Penco, Eduvigis

    2011-07-14

    Here we present experimental data of different properties for a set of binary mixtures composed of water or alkanols (methanol to butanol) with an ionic liquid (IL), butylpyridinium tetrafluoroborate [bpy][BF(4)]. Solubility data (x(IL),T) are presented for each of the mixtures, including water, which is found to have a small interval of compositions in IL, x(IL), with immiscibility. In each case, the upper critical solubility temperature (UCST) is determined and a correlation was observed between the UCST and the nature of the compounds in the mixtures. Miscibility curves establish the composition and temperature intervals where thermodynamic properties of the mixtures, such as enthalpies H(m)(E) and volumes V(m)(E), can be determined. Hence, at 298.15 and 318.15 K these can only be found with the first four alkanols. All mixing properties are correlated with a suitable equation ξ (x(IL),T,Y(m)(E) = 0. An analysis on the influence of the temperature in the properties is shown, likewise a comparison between the results obtained here and those of analogous mixtures, discussing the position of the -CH(3) group in the pyridinic ring. The (1)H NMR spectra are determined to analyze the molecular interactions present, especially those due to hydrogen bonds. Additional information about the molecular interactions and their influence on the mixing properties is obtained by quantum chemistry calculations.

  2. High power density supercapacitors based on the carbon dioxide activated D-glucose derived carbon electrodes and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid

    NASA Astrophysics Data System (ADS)

    Tooming, T.; Thomberg, T.; Kurig, H.; Jänes, A.; Lust, E.

    2015-04-01

    The electrochemical impedance spectroscopy, cyclic voltammetry, constant current charge/discharge and the constant power discharge methods have been applied to establish the electrochemical characteristics of the electrical double-layer capacitor (EDLC) consisting of the 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4) ionic liquid and microporous carbon electrodes. Microporous carbon material used for preparation of electrodes (GDAC - glucose derived activated carbon), has been synthesised from D-(+)-glucose by the hydrothermal carbonization method, including subsequent pyrolysis, carbon dioxide activation and surface cleaning step with hydrogen. The Brunauer-Emmett-Teller specific surface area (SBET = 1540 m2 g-1), specific surface area calculated using the non-local density functional theory in conjunction with stable adsorption integral equation using splines (SAIEUS) model SSAIEUS = 1820 m2 g-1, micropore surface area (Smicro = 1535 m2 g-1), total pore volume (Vtot = 0.695 cm3 g-1) and the pore size distribution were obtained from the N2 sorption data. The SBET, Smicro and Vtot values have been correlated with the electrochemical characteristics strongly dependent on the carbon activation conditions applied for EDLCs. Wide region of ideal polarizability (ΔV ≤ 3.2 V), very short charging/discharging time constant (2.7 s), and high specific series capacitance (158 F g-1) have been calculated for the optimized carbon material GDAC-10h (activation of GDAC with CO2 during 10 h) in EMImBF4 demonstrating that this system can be used for completing the EDLC with high energy- and power densities.

  3. Effective methylation of phosphonic acids related to chemical warfare agents mediated by trimethyloxonium tetrafluoroborate for their qualitative detection and identification by gas chromatography-mass spectrometry.

    PubMed

    Valdez, Carlos A; Leif, Roald N; Alcaraz, Armando

    2016-08-24

    The effective methylation of phosphonic acids related to chemical warfare agents (CWAs) employing trimethyloxonium tetrafluoroborate (TMO·BF4) for their qualitative detection and identification by gas chromatography-mass spectrometry (GC-MS) is presented. The methylation occurs in rapid fashion (1 h) and can be conveniently carried out at ambient temperature, thus providing a safer alternative to the universally employed diazomethane-based methylation protocols. Optimization of the methylation parameters led us to conclude that methylene chloride was the ideal solvent to carry out the derivatization, and that even though methylated products can be observed surfacing after only 1 h, additional time was not found to be detrimental but beneficial to the process particularly when dealing with analytes at low concentrations (∼10 μg mL(-1)). Due to its insolubility in methylene chloride, TMO·BF4 conveniently settles to the bottom during the reaction and does not produce additional interfering by-products that may further complicate the GC-MS analysis. The method was demonstrated to successfully methylate a variety of Schedule 2 phosphonic acids, including their half esters, resulting in derivatives that were readily detected and identified using the instrument's spectral library. Most importantly, the method was shown to simultaneously methylate a mixture of the organophosphorus-based nerve agent hydrolysis products: pinacolyl methylphosphonate (PMPA), cyclohexyl methylphosphonate (CyMPA) and ethyl methylphosphonate (EMPA) (at a 10 μg mL(-1) concentration each) in a fatty acid ester-rich organic matrix (OPCW-PT-O3) featured in the 38th Organisation for the Prohibition of Chemical Weapons (OPCW) Proficiency Test. In addition, the protocol was found to effectively methylate N,N-diethylamino ethanesulfonic acid and N,N-diisopropylamino ethanesulfonic acid that are products arising from the oxidative degradation of the V-series agents VR and VX respectively. The

  4. Enzymatic Transesterification of Kraft Lignin with Long Acyl Chains in Ionic Liquids.

    PubMed

    Hulin, Lise; Husson, Eric; Bonnet, Jean-Pierre; Stevanovic, Tatjana; Sarazin, Catherine

    2015-09-09

    Valorization of lignin is essential for the economic viability of the biorefinery concept. For example, the enhancement of lignin hydrophobicity by chemical esterification is known to improve its miscibility in apolar polyolefin matrices, thereby helping the production of bio-based composites. To this end and due to its many reactive hydroxyl groups, lignin is a challenging macromolecular substrate for biocatalyzed esterification in non-conventional media. The present work describes for the first time the lipase-catalyzed transesterification of Kraft lignin in ionic liquids (ILs). Three lipases, three 1-butyl-3-methylimidazolium based ILs and ethyl oleate as long chain acyl donor were selected. Best results were obtained with a hydrophilic/hydrophobic binary IL system (1-butyl-3-methylimidazolium trifluoromethanesulfonate/1-butyl-3-methylimidazolium hexafluoro- phosphate, 1/1 v/v) and the immobilized lipase B from Candida antarctica (CALB) that afforded a promising transesterification yield (ca. 30%). Similar performances were achieved by using 1-butyl-3-methylimidazolium hexafluorophosphate as a coating agent for CALB rather than as a co-solvent in 1-butyl-3-methylimidazolium trifluoromethane-sulfonate thus limiting the use of hydrophobic IL. Structural characterization of lignin oleate was performed by spectroscopic studies (FTIR and ¹H-NMR). The synthesized lignin oleate exhibited interesting thermal and textural properties, different from those of the original Kraft lignin.

  5. Understanding lignin treatment in dialkylimidazolium-based ionic liquid-water mixtures.

    PubMed

    Yan, Bing; Li, Kunlan; Wei, Ligang; Ma, Yingchong; Shao, Guolin; Zhao, Deyang; Wan, Wenying; Song, Lili

    2015-11-01

    The treatment of enzymatically hydrolyzed lignin (EHL) in dialkylimidazolium-based ionic liquid (IL)-water mixtures (50-100wt% IL content) was investigated at 150°C for 3h. pH, IL type, and IL content were found to greatly influence the degradation of lignin and the structure of regenerated lignin. 1-Butyl-3-methylimidazolium methylsulfonate-water mixtures with low pH facilitated lignin depolymerization but destroyed the regenerated lignin substructure. Regenerated lignin with low molecular weight and narrow polydispersity index (2.2-7.7) was obtained using a 1-butyl-3-methylimidazolium acetate-based system. Water addition inhibited lignin depolymerization at 50-100wt% IL content, except for 70wt% 1-butyl-3-methylimidazolium chloride-water mixture. Compared with pure IL treatment, obvious differences were observed in the breakdown of inter-unit linkages and ratio of syringyl to guaiacyl units in regenerated lignin with IL-water treatment.

  6. Ultrasonic-electrodeposition of PtPd alloy nanoparticles on ionic liquid-functionalized graphene paper: towards a flexible and versatile nanohybrid electrode

    NASA Astrophysics Data System (ADS)

    Sun, Yimin; Zheng, Huaming; Wang, Chenxu; Yang, Mengmeng; Zhou, Aijun; Duan, Hongwei

    2016-01-01

    Here we fabricate a new type of flexible and versatile nanohybrid paper electrode by ultrasonic-electrodeposition of PtPd alloy nanoparticles on freestanding ionic liquid (IL)-functionalized graphene paper, and explore its multifunctional applications in electrochemical catalysis and sensing systems. The graphene-based paper materials demonstrate intrinsic flexibility, exceptional mechanical strength and high electrical conductivity, and therefore can serve as an ideal freestanding flexible electrode for electrochemical devices. Furthermore, the functionalization of graphene with IL (i.e., 1-butyl-3-methylimidazolium tetrafluoroborate) not only increases the electroactive surface area of a graphene-based nanohybrid paper electrode, but also improves the adhesion and dispersion of metal nanoparticles on the paper surface. These unique attributes, combined with the merits of an ultrasonic-electrodeposition method, lead to the formation of PtPd alloy nanoparticles on IL-graphene paper with high loading, uniform distribution, controlled morphology and favourable size. Consequently, the resultant nanohybrid paper electrode exhibits remarkable catalytic activity as well as excellent cycle stability and improved anti-poisoning ability towards electrooxidation of fuel molecules such as methanol and ethanol. Furthermore, for nonenzymatic electrochemical sensing of some specific biomarkers such as glucose and reactive oxygen species, the nanohybrid paper electrode shows high selectivity, sensitivity and biocompatibility in these bio-catalytic processes, and can be used for real-time tracking hydrogen peroxide secretion by living human cells. All these features demonstrate its promising application as a versatile nanohybrid electrode material in flexible and lightweight electrochemical energy conversion and biosensing systems such as bendable on-chip power sources, wearable/implantable detectors and in vivo micro-biosensors.Here we fabricate a new type of flexible and

  7. Predicting the partitioning of biological compounds between room-temperature ionic liquids and water by means of the solvation-parameter model.

    PubMed

    Padró, Juan M; Ponzinibbio, Agustín; Mesa, Leidy B Agudelo; Reta, Mario

    2011-03-01

    The partition coefficients, P(IL/w), for different probe molecules as well as for compounds of biological interest between the room-temperature ionic liquids (RTILs) 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF(6)], 1-hexyl-3-methylimidazolium hexafluorophosphate, [HMIM][PF(6)], 1-octyl-3-methylimidazolium tetrafluoroborate, [OMIM][BF(4)] and water were accurately measured. [BMIM][PF(6)] and [OMIM][BF(4)] were synthesized by adapting a procedure from the literature to a simpler, single-vessel and faster methodology, with a much lesser consumption of organic solvent. We employed the solvation-parameter model to elucidate the general chemical interactions involved in RTIL/water partitioning. With this purpose, we have selected different solute descriptor parameters that measure polarity, polarizability, hydrogen-bond-donor and hydrogen-bond-acceptor interactions, and cavity formation for a set of specifically selected probe molecules (the training set). The obtained multiparametric equations were used to predict the partition coefficients for compounds not present in the training set (the test set), most being of biological interest. Partial solubility of the ionic liquid in water (and water into the ionic liquid) was taken into account to explain the obtained results. This fact has not been deeply considered up to date. Solute descriptors were obtained from the literature, when available, or else calculated through commercial software. An excellent agreement between calculated and experimental log P(IL/w) values was obtained, which demonstrated that the resulting multiparametric equations are robust and allow predicting partitioning for any organic molecule in the biphasic systems studied.

  8. Ionic Liquid-Induced Unprecedented Size Enhancement of Aggregates within Aqueous Sodium Dodecylbenzene Sulfonate

    SciTech Connect

    Rai, Rewa; Baker, Gary A; Behera, Kamalakanta; Mohanty, Pravakar; Kurur, Narayanan; Pandey, Siddharth

    2010-01-01

    Physicochemical properties of aqueous micellar solutions may change in the presence of ionic liquids (ILs). Micelles help to increase the aqueous solubility of ILs. The average size of the micellar aggregates within aqueous sodium dodecylbenzene sulfonate (SDBS) is observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM) to increase in a sudden and drastic fashion as the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) is added. Similar addition of [bmim][PF6] to aqueous sodium dodecyl sulfate (SDS) results in only a slow gradual increase in average aggregate size. While addition of the IL [bmim][BF4] also gives rise to sudden aggregate size enhancement within aqueous SDBS, the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF4]), and inorganic salts NaPF6 and NaBF4, only gradually increase the assembly size upon their addition. Bulk dynamic viscosity, microviscosity, dipolarity (indicated by the fluorescent reporter pyrene), zeta potential, and electrical conductance measurements were taken to gain insight into this unusual size enhancement. It is proposed that bmim cations of the IL undergo Coulombic attractive interactions with anionic headgroups at the micellar surface at all [bmim][PF6] concentrations in aqueous SDS; in aqueous SDBS, beyond a critical IL concentration, bmim becomes involved in cation- interaction with the phenyl moiety of SDBS within micellar aggregates with the butyl group aligned along the alkyl chain of the surfactant. This relocation of bmim results in an unprecedented size increase in micellar aggregates. Aromaticity of the IL cation alongside the presence of sufficiently aliphatic (butyl or longer) alkyl chains on the IL appear to be essential for this dramatic critical expansion in self-assembly dimensions within aqueous SDBS.

  9. Hydrogen-bonding interactions between [BMIM][BF4] and dimethyl sulfoxide

    NASA Astrophysics Data System (ADS)

    Zheng, Yan-Zhen; He, Hong-Yan; Zhou, Yu; Yu, Zhi-Wu

    2014-07-01

    Mixtures of Ionic liquids and small polar organic solvent are potential green solvents for cellulose dissolution under mild conditions. In this work, the interactions between a representative imidazolium-based ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) and dimethyl sulfoxide (DMSO) were investigated in detail by attenuated total reflection infrared spectroscopy (ATR-IR) and density functional theory calculations (DFT). The main conclusions are: (1) C2-H is the main interaction site in forming cation-anion, cation-DMSO, and [BMIM][BF4]-DMSO complexes. (2) The two turning points of the wavenumber shift changes of C2-H may indicate that the dilution process can be divided into several stages: from larger ion clusters to smaller ion clusters, then to ion pairs, and finally to individual ions. The solvent molecules cannot break apart the strong Coulombic interaction between [BMIM]+ and [BF4]- but can break apart the ion clusters into ion pairs when the mole fraction of DMSO is less than 0.9. When the mole fraction of DMSO is greater than 0.9, ion pairs can be broke into ions. (3) The hydrogen-bonds of the aromatic C-Hs in [BMIM]+ are strengthened in the dilution process while those of the alkyl C-Hs of [BMIM]+ are weakened. (4) The aromatic C-Hs of the [BMIM]+ cation strength before the weakening of the alkyl C-Hs. These in-depth studies on the properties of the ionic liquid-DMSO mixed solvents may shed light on exploring their applications as mixed solvents in cellulose dissolution and other practices.

  10. Interfacial Design of Ternary Mixed Matrix Membranes Containing Pebax 1657/Silver-Nanopowder/[BMIM][BF4] for Improved CO2 Separation Performance.

    PubMed

    Ghasemi Estahbanati, Ehsan; Omidkhah, Mohammadreza; Ebadi Amooghin, Abtin

    2017-03-08

    In this research, Pebax1657 as an organic phase and silver nanoparticles as an inorganic phase were used for preparation of binary mixed matrix membranes (MMMs). Silver nanoparticles as a filler could enter the polymer chains and enhance the gas permeability by increasing the fractional free volume of membranes. Afterward, ternary MMMs were fabricated by addition of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) ionic liquid, in order to have better polymer/filler adhesion and eliminate interfacial defects and nonselective voids. In addition, positively polarized silver nanoparticles in the presence of the IL could interact with PEO segment of the polymer and increase the CO2 affinity of membranes, which results in increasing the CO2/light gases permselectivity of MMMs. Gas permeation properties of MMMs were studied at a temperature of 35 °C and operating pressures from 2 to 10 bar. Moreover, fabricated membranes were characterized by fourier transform infrared-attenuated total reflectance (FTIR-ATR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimeter (DSC). The analysis revealed that there is a proper adhesion between positively charged surface of nanoparticles and the polymer, and both filler and IL decrease the crystallinity of the membranes, which could enhance the polar gas transport properties. Gas permeation results showed significant enhancement in CO2 permeability (325 Barrer) for binary membrane (Pebax 1657/1%Ag) at 35 °C and 10 bar. Moreover, ternary MMM (Pebax 1657/0.5%Ag/50%IL) encountered significant increase in both permeability and selectivity in comparison with neat membrane. Indeed, the CO2 permeability increased from 110 Barrer to 180 (about 64%). Moreover, the related CO2/CH4 and CO2/N2 selectivities were increased from 20.8 to 61.0 (more than 193%) and from 78.6 to 187.5 (about 139%), respectively.

  11. Stokes shift dynamics in (ionic liquid + polar solvent) binary mixtures: composition dependence.

    PubMed

    Daschakraborty, Snehasis; Ranjit, Biswas

    2011-04-14

    An approximate semimolecular theory has been developed to investigate the composition dependence of Stokes shift dynamics of a fluorescent dye molecule dissolved in binary mixtures of an ionic liquid (IL) with a conventional polar solvent at different mole fractions. The theory expresses the dynamic Stokes shift as a sum of contributions from the dye-IL and the dye-polar solvent interactions and suggests substantial solute-cation dipole-dipole interaction contribution to the solvation energy relaxation. The theory, when applied to aqueous mixtures of 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF(6)]) and tetrafluoroborate ([Bmim][BF(4)]), and binary mixtures of ([Bmim][BF(4)] + acetonitrile), predicts reduction of Stokes shift but acceleration of the dynamics upon increasing the polar solvent concentration for the most part of the mixture composition. The decrease in dynamic Stokes shift values has been found to occur due to decrease of the dye-IL interaction in the presence of the added polar solvent. For aqueous binary mixtures of IL, the predicted results are in semiquantitative agreement with the available experimental results. However, the calculated dynamics suggest much weaker composition dependence than that observed in experiments. In addition, the theory predicts a turn around for dynamic Stokes shift in its composition dependence for ([Bmim][BF(4)] + acetonitrile) mixtures at higher dilutions of the IL. Interestingly, effective dipolar medium calculations for Stokes shift dynamics in ([Bmim][BF(4)] + dichloromethane) binary mixtures predict a very weak or even nonexistent nonlinear composition dependence. These predictions should be reexamined in experiments.

  12. Static and dynamic electrowetting of an ionic liquid in a solid/liquid/liquid system.

    PubMed

    Paneru, Mani; Priest, Craig; Sedev, Rossen; Ralston, John

    2010-06-23

    A droplet of an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmim.BF(4)) is immersed in an immiscible liquid (n-hexadecane) and electrowetted on a flat Teflon AF1600-coated ITO electrode. The static contact angle decreases significantly when voltage is applied between the droplet and the electrode: from 145 degrees down to 50 degrees (with DC voltage) and 15 degrees (with AC voltage). The electrowetting curves (contact angle versus voltage) are similar to the ones obtained in other solid/liquid/vapor and solid/liquid/liquid systems: symmetric with respect to zero voltage and correctly described by Young-Lippmann equation below saturation. The reversibility is excellent and contact angle hysteresis is minimal (approximately 2 degrees). The step size used in applying the DC voltage and the polarity of the voltage are unimportant. The saturation contact angle cannot be predicted with the simple zero-interfacial tension theory. Spreading (after applying a DC voltage) and retraction (after switching off the voltage) of the droplet is monitored. The base area of the droplet varies exponentially during wetting (exponential saturation) and dewetting (exponential decay). The characteristic time is 20 ms for spreading and 35 ms for retraction (such asymmetry is not observed with water-glycerol mixtures of a similar viscosity). The spreading kinetics (dynamic contact angle versus contact line speed) can be described by the hydrodynamic model (Voinov's equation) for small contact angles and by the molecular-kinetic model (Blake's equation) for large contact angles. The role of viscous and molecular dissipation follows the scheme outlined by Brochard-Wyart and de Gennes.

  13. Toxicity of ionic liquids to Clostridium sp. and effects on uranium biosorption.

    PubMed

    Zhang, C; Malhotra, S V; Francis, A J

    2014-01-15

    As green solvents ionic liquids (ILs) show high potential in nuclear industry for extraction and purification of actinides. However, to date relatively little information has been gained on ILs application in microbial processes, for example biosorption of radionuclides. We investigated the effects of three ILs, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), N-ethylpyridinium trifluoroacetate (EtPyCF3COO) and N-ethylpyridinium tetrafluoroborate (EtPyBF4) on the growth and biosorption of uranium by Clostridium sp. The ILs affected the growth of the bacterium as evidenced by decreases in optical density, total gas production, and organic acids production from glucose metabolism. The IC50-48h of three ILs decreased in the order of BMIMPF6 (8.26mM)>EtPyBF4 (7.04mM)>EtPyCF3COO (4.05mM). Uranium biosorption by the bacterial cells decreased by 75% in the presence of 1% (v/v) BMIMPF6 and by about 90% with 1% (v/v) EtPyBF4 or EtPyCF3COO, in comparison to the control without ILs. The diminished biosorption may be attributed to the membrane damages induced by EtPyBF4 and EtPyCF3COO, which can be visualized by Transmission Electron Microscope (TEM) analysis. Energy-dispersive X-ray spectroscopy (EDS) analysis revealed the accumulation of uranium inside peripheral membrane of the cells exposed to uranium alone or with BMIMPF6, while little or no accumulation was observed in the presence of EtPyBF4 and EtPyCF3COO. These results imply that potential toxicity of ILs towards microorganisms is a particularly important issue in limiting its biotechnological applications.

  14. Coated capillaries with highly charged polyelectrolytes and carbon nanotubes co-aggregated with sodium dodecyl sulphate for the analysis of sulfonylureas by capillary electrophoresis.

    PubMed

    El-Debs, Racha; Nehmé, Reine; Claude, Bérengère; Motteau, Solène; Togola, Anne; Berho, Catherine; Morin, Philippe

    2014-11-07

    Sulfonylureas (SUs) are one of the most widely used herbicides to control weeds in crops. Herein, capillary electrophoresis (CE) was used to determine four sulfonylureas in natural waters, namely chlorsulfuron (CS), iodosulfuron methyl (IM), metsulfuron methyl (MSM) and mesosulfuron methyl (MSS). First of all, a bare silica capillary was chosen with 10mM of 1-butyl-3-methylimidazolium tetrafluoroborate (bminBF4) as electrophoretic buffer (pH 9.6) containing 2 mg L(-1) of surfactant-coated single-wall carbon nanotubes (SC-SWCNTs). A dramatic deviation in migration times was observed. Therefore, a poly(diallyldimethylammonium) chloride (PDADMAC) statically coated cationic capillary was used to improve repeatability and to alter the selectivity of the separation. The electroosmotic flow (EOF) measurement revealed that the SC-SWCNTs were strongly adsorbed at the surface of the PDADMAC coating even in the absence of the surfactant-coated nanotubes in the electrolyte buffer. Consequently, a stable strong cathodic EOF and excellent repeatabilities were obtained with relative standard deviations (RSDs) on migration times and on corrected peak areas below 0.9 and 1.5%, respectively. The separation of the SUs was conducted in only 6 min. No regeneration of the coating between analyses was necessary, and high peak efficiencies up to 173,000 theoretical plates were obtained. The bi-layer coating was subsequently used to analyze sulfonylureas in tap water, in several mineral waters as well as in underground waters spiked with SUs and directly injected into the CE capillary.

  15. Fabrication of hollow mesoporous NiO hexagonal microspheres via hydrothermal process in ionic liquid

    SciTech Connect

    Zhao, Jinbo; Wu, Lili; Zou, Ke

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer Ni(OH){sub 2} precursors were synthesized in ionic liquid and water solution by hydrothermal method. Black-Right-Pointing-Pointer NiO hollow microspheres were prepared by thermal treatment of Ni(OH){sub 2} precursors. Black-Right-Pointing-Pointer NiO hollow microspheres were self-assembled by mesoporous cubic and hexagonal nanocrystals with high specific surface area. Black-Right-Pointing-Pointer The mesoporous structure is stable at 773 K. Black-Right-Pointing-Pointer The ionic liquid absorbed on the O-terminate surface of the crystals to form hydrogen bond and played key roles in determining the final shape of the NiO novel microstructure. -- Abstract: The novel NiO hexagonal hollow microspheres have been successfully prepared by annealing Ni(OH){sub 2}, which was synthesized via an ionic liquid-assisted hydrothermal method. The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), N{sub 2} adsorption-desorption and Fourier transform infrared spectrometer (FTIR). The results show that the hollow NiO microstructures are self-organized by mesoporous cubic and hexagonal nanocrystals. The mesoporous structure possessed good thermal stability and high specific surface area (ca. 83 m{sup 2}/g). The ionic liquid 1-butyl-3methylimidazolium tetrafluoroborate ([Bmim][BF{sub 4}]) was found to play a key role in controlling the morphology of NiO microstructures during the hydrothermal process. The special hollow mesoporous architectures will have potential applications in many fields, such as catalysts, absorbents, sensors, drug-delivery carriers, acoustic insulators and supercapacitors.

  16. J-aggregation of ionic liquid solutions of meso-tetrakis(4-sulfonatophenyl)porphyrin

    SciTech Connect

    Ali, Maroof; Kumar, Vinod; Baker, Sheila N; Baker, Gary A; Pandey, Siddharth

    2010-01-01

    The title porphyrin was dissolved in the hydrophilic ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4], and triggered to assemble into J-aggregates by the addition of incremental volumes of water containing various amounts of acid (0.1, 0.2, or 1.0 M HCl). In contrast to recent studies, the current investigation is unique in that it centers on media that contain a predominant ionic liquid component (2.9 5.4 M [bmim][BF4]), as opposed to an aqueous electrolyte containing a small fraction of ionic liquid as dissociated solute. Complex aggregation and underlying photophysical behavior are revealed from absorption spectroscopy, steady-state fluorescence, and resonance light scattering studies. Upon addition of aqueous HCl, the efficient formation of H4TPPS2 J-aggregates from the diprotonated form of meso-tetrakis(4-sulfonatophenyl)porphyrin (H2TPPS4) occurs in [bmim][BF4]-rich media in a manner highly dependent upon the acidity, TPPS concentration, and solvent composition. The unique features of TPPS aggregation in this ionic liquid were elucidated, including the surprising disassembly of J-aggregates at higher aqueous contents, and our results are described qualitatively in terms of the molecular exciton theory. Finally, the potential of this system for the optical sensing of water at a sensitivity below 0.5 wt% is demonstrated. Overall, our findings accentuate how little is known about functional self-assembly within ionic liquids and suggest a number of avenues for exploring this completely untouched research landscape.

  17. Non-covalent interactions in ionic liquid ion pairs and ion pair dimers: a quantum chemical calculation analysis.

    PubMed

    Marekha, Bogdan A; Kalugin, Oleg N; Idrissi, Abdenacer

    2015-07-14

    Ionic liquids (ILs) being composed of bulky multiatomic ions reveal a plethora of non-covalent interactions which determine their microscopic structure. In order to establish the main peculiarities of these interactions in an IL-environment, we have performed quantum chemical calculations for a set of representative model molecular clusters. These calculations were coupled with advanced methods of analysis of the electron density distribution, namely, the quantum theory of atoms in molecules (QTAIM) and the non-covalent interaction (NCI; J. Am. Chem. Soc., 2010, 132, 6499) approaches. The former allows for profound quantitative characterization of non-covalent interactions between atoms while the latter gives an overview of spatial extent, delocalization, and relative strength of such interactions. The studied systems consist of 1-butyl-3-methylimidazolium (Bmim(+)) cations and different perfluorinated anions: tetrafluoroborate (BF4(-)), hexafluorophosphate (PF6(-)), trifluoromethanesulfonate (TfO(-)), and bis(trifluoromethanesulfonyl)imide (TFSI(-)). IL ion pairs and ion pair dimers were considered as model structures for the neat ILs and large aggregates. Weak electrostatic hydrogen bonding was found between the anions and the imidazolium ring hydrogen atoms of cations. Weaker but still appreciable hydrogen bonding was also noted for hydrogen atoms adjacent to the imidazolium ring alkyl groups of Bmim(+). The relative strength of the hydrogen bonding is higher in BmimTfO and BmimBF4 ILs than in BmimPF6 and BmimTFSI, whereas BmimTfO and BmimTFSI reveal higher sensitivity of hydrogen bonding at the different hydrogen atoms of the imidazolium ring.

  18. Ultrafast vibrational spectroscopy (2D-IR) of CO{sub 2} in ionic liquids: Carbon capture from carbon dioxide’s point of view

    SciTech Connect

    Brinzer, Thomas; Berquist, Eric J.; Ren, Zhe; Dutta, Samrat; Johnson, Clinton A.; Krisher, Cullen S.; Lambrecht, Daniel S.; Garrett-Roe, Sean

    2015-06-07

    The CO{sub 2}ν{sub 3} asymmetric stretching mode is established as a vibrational chromophore for ultrafast two-dimensional infrared (2D-IR) spectroscopic studies of local structure and dynamics in ionic liquids, which are of interest for carbon capture applications. CO{sub 2} is dissolved in a series of 1-butyl-3-methylimidazolium-based ionic liquids ([C{sub 4}C{sub 1}im][X], where [X]{sup −} is the anion from the series hexafluorophosphate (PF{sub 6}{sup −}), tetrafluoroborate (BF{sub 4}{sup −}), bis-(trifluoromethyl)sulfonylimide (Tf{sub 2}N{sup −}), triflate (TfO{sup −}), trifluoroacetate (TFA{sup −}), dicyanamide (DCA{sup −}), and thiocyanate (SCN{sup −})). In the ionic liquids studied, the ν{sub 3} center frequency is sensitive to the local solvation environment and reports on the timescales for local structural relaxation. Density functional theory calculations predict charge transfer from the anion to the CO{sub 2} and from CO{sub 2} to the cation. The charge transfer drives geometrical distortion of CO{sub 2}, which in turn changes the ν{sub 3} frequency. The observed structural relaxation timescales vary by up to an order of magnitude between ionic liquids. Shoulders in the 2D-IR spectra arise from anharmonic coupling of the ν{sub 2} and ν{sub 3} normal modes of CO{sub 2}. Thermal fluctuations in the ν{sub 2} population stochastically modulate the ν{sub 3} frequency and generate dynamic cross-peaks. These timescales are attributed to the breakup of ion cages that create a well-defined local environment for CO{sub 2}. The results suggest that the picosecond dynamics of CO{sub 2} are gated by local diffusion of anions and cations.

  19. COSMO-RS analysis on mixing properties obtained for the systems 1-butyl-X-methylpyridinium tetrafluoroborate [X = 2,3,4] and 1,ω-dibromoalkanes [ω = 1-6].

    PubMed

    Navas, Ana; Ortega, Juan; Palomar, José; Díaz, Carlos; Vreekamp, Remko

    2011-05-07

    A theoretical-experimental study for a set of 18 binary systems comprised of [bXmpy][BF(4)] (X=2-4) + 1,ω-Br(CH(2))(v)Br (v =ω=1-6) at a temperature of 298.15 K is presented. The solubility curves are determined for each binary system, establishing the intervals of measurement for the excess properties, H(E)(m) and V(E)(m). These properties are then determined for those systems that present a miscibility zone. Binary systems containing 1,ω-dibromoalkanes with ω=5,6 present reduced solubility intervals at the temperature of 298.15 K. However, the mixtures with 1,1-dibromomethane were totally miscible with the three isomers of 1-butyl-X-methylpyridinium tetrafluoroborate. Mixtures with dibromomethane present H(E)(m) <0, whereas H(E)(m) >0 for the other binary systems. Sigmoidal curves were observed for the V(E)(m) describing expansion and contraction processes for all the systems, except for the mixtures of [b2mpy][BF(4)] with the smaller dibromoalkanes, which present contraction effects. The COSMO-RS methodology was used to estimate the solubilities and the intermolecular interaction energies, giving an acceptable explanation of the behavioral structure of pure compounds and solutions.

  20. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  1. Biomass Processing using Ionic Liquids for Jet Fuel Production

    DTIC Science & Technology

    2014-04-09

    model compounds) phase diagrams, and Thrust 3: Examination of the activity of cellulase enzymes in ILs for the conversion of cellulose to glucose...1-butyl-3-methylimidazolium acetate, do not result in any significant variation in β-glucosidase cellulase enzyme activity—this is important since

  2. Ultrafast Multi-Dimensional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  3. Ultrafast Multi-Dimentional Infrared Vibrational Echo Spectroscopy of Molecular Dynamics on Surfaces and in Bulk Systems

    DTIC Science & Technology

    2012-02-28

    trifluoromethanesulfonyl ) imide (alkyl = ethyl, butyl, hexyl, octyl) room temperature ionic liquids (RTIL). The two fluorescent probe molecules display...principally orientational relaxation, caused by the addition of lithium bis (trifluoromethylsulfonyl) imide to the ionic liquid 1-butyl 3-methylimidazolium... bis (trifluoromethylsulfonyl) imide . The lithium salt concentration was found to affect the dynamics on multiple time scales and discontinuities in

  4. A Sustainable Approach to the Stereoselective Synthesis of Diazaheptacyclic Cage Systems Based on a Multicomponent Strategy in an Ionic Liquid.

    PubMed

    Suresh Kumar, Raju; Almansour, Abdulrahman I; Arumugam, Natarajan; Altaf, Mohammad; Menéndez, José Carlos; Kumar, Raju Ranjith; Osman, Hasnah

    2016-01-29

    The microwave-assisted three-component reactions of 3,5-bis(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones, acenaphthenequinone and cyclic α-amino acids in an ionic liquid, 1-butyl-3-methylimidazolium bromide, occurred through a domino sequence affording structurally intriguing diazaheptacyclic cage-like compounds in excellent yields.

  5. Ionic Liquid as a Solvent and Catalyst for Acylation of Maltodextrin

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Catalyst-free esterification of maltodextrin was carried out in ionic liquid. Stearate esters of maltodextrin were obtained in various degree of substitution (DS) when vinyl stearate or stearic acid was heated with maltodextrin in ionic liquid, 1-butyl-3-methylimidazolium cyanamide (bmim[dca]). Re...

  6. Esterification of Starch in Ionic Liquids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We shall discuss the use of various ionic liquids in the preparation of starch esters. Starch was reacted with vinyl acetate in different 1-butyl-3-methylimidazolium (bmim) salts as solvents in an effort to produce starches with different acetylation patterns. Overall degree of substitution (DS) w...

  7. Simultaneous determination of hydrazine and phenyl hydrazine using 4′-(4-carboxyphenyl)-2,2′:6′,2″ terpyridine diacetonitrile triphenylphosphine ruthenium(II) tetrafluoroborate complex functionalized multiwalled carbon nanotubes modified electrode

    SciTech Connect

    Tiwari, Ida; Gupta, Mandakini; Sinha, Preeti; Banks, Craig E.

    2014-12-15

    Highlights: • A nanocomposite of ruthenium(II) terpyridine, triphenylphosphine based complex and multiwalled carbon nanotubes have been used first time for simultaneous detection of hydrazine and phenyl hydrazine. • The detection limit reported is lower as compared to other reported works. • The paper also focuses towards effect of ligand variation attached to ruthenium(II) terpyridine based complexes complex for the hydrazine and phenyl hydrazine detection. • Nanocomposite does not involve any biological entity hence high stability. - Abstract: A nanocomposite based on the incorporation of the complex 4′-(4-carboxyphenyl)-2,2′:6′,2″ terpyridine triphenylphosphine diacetonitrile ruthenium(II) tetrafluoroborate with multiwalled carbon nanotubes and ionomer supported upon a glassy carbon electrode substrate is reported and characterized with scanning electron microscopy, transmission electron microscopy and infrared spectroscopy. The electrochemical behavior and stability of the composite electrode was investigated via cyclic voltammetry. The modified electrode exhibits an electro-catalytic activity towards the oxidation of both hydrazine and phenyl hydrazine in 0.1 M phosphate buffer solution (PBS, pH 7.4). The oxidation of hydrazine and phenyl hydrazine occurs at 0.81 V and 0.32 V with limit of detection found to be 3.7 × 10{sup −7} M and 1.15 × 10{sup −7} M and having a linear range from 5 × 10{sup −6} M to 6.5 × 10{sup −3} M, and 5 × 10{sup −6} M to 0.2 × 10{sup −3} M, respectively.

  8. (18)F-tetrafluoroborate ((18)F-TFB), a PET probe for imaging sodium-iodide symporter expression: Whole-body biodistribution, safety and radiation dosimetry in thyroid cancer patients.

    PubMed

    O' Doherty, Jim; Jauregui-Osoro, Maite; Brothwood, Teresa; Szyszko, Teresa; Marsden, Paul; O' Doherty, Michael; Cook, Gary; Blower, Philip; Lewington, Val

    2017-04-06

    Rationale: We report the safety, biodistribution and internal radiation dosimetry, in humans with thyroid cancer, of (18)F-tetrafluoroborate ((18)F-TFB), a novel PET radioligand for imaging the human sodium/iodide symporter (hNIS). Methods: Serial whole-body PET scans of 5 subjects with recently diagnosed with thyroid cancer were acquired prior to surgery for up to 4 hours after injection of 184 ± 15 MBq of (18)F-TFB. Activity was determined in whole blood, plasma and urine. Mean organ absorbed doses and effective doses were calculated via quantitative image analysis and using OLINDA/EXM software. Results: Images showed high uptake of (18)F-TFB in known areas of high hNIS expression (thyroid, salivary glands and stomach). Excretion was predominantly renal. No adverse effects in relation to safety of the radiopharmaceutical were observed. The effective dose was 0.0326 ± 0.0018 mSv/MBq. The critical tissues/organs receiving the highest mean sex-averaged absorbed doses were thyroid (0.135 ± 0.079 mSv/MBq), stomach (0.069 ± 0.022 mSv/MBq) and salivary glands (parotids 0.031 ± 0.011 mSv/MBq, submandibular 0.061 ± 0.031 mSv/MBq). Other organs of interest were the bladder (0.102 ± 0.046 mSv/MBq) and kidneys (0.029 ± 0.009 mSv/MBq). Conclusion: Imaging using (18)F-TFB imparts a radiation exposure similar in magnitude to many other (18)F--labeled radiotracers. (18)F-TFB shows a similar biodistribution to (99m)Tc-pertechnetate, a known non-organified hNIS tracer, and is pharmacologically and radiobiologically safe in humans. Phase 2 trials as a hNIS imaging agent are warranted.

  9. Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model.

    PubMed

    Lantz, Andrew W; Pino, Verónica; Anderson, Jared L; Armstrong, Daniel W

    2006-05-19

    The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces

  10. Dielectric relaxation in ionic liquid/dipolar solvent binary mixtures: A semi-molecular theory

    NASA Astrophysics Data System (ADS)

    Daschakraborty, Snehasis; Biswas, Ranjit

    2016-03-01

    A semi-molecular theory is developed here for studying dielectric relaxation (DR) in binary mixtures of ionic liquids (ILs) with common dipolar solvents. Effects of ion translation on DR time scale, and those of ion rotation on conductivity relaxation time scale are explored. Two different models for the theoretical calculations have been considered: (i) separate medium approach, where molecularities of both the IL and dipolar solvent molecules are retained, and (ii) effective medium approach, where the added dipolar solvent molecules are assumed to combine with the dipolar ions of the IL, producing a fictitious effective medium characterized via effective dipole moment, density, and diameter. Semi-molecular expressions for the diffusive DR times have been derived which incorporates the effects of wavenumber dependent orientational static correlations, ion dynamic structure factors, and ion translation. Subsequently, the theory has been applied to the binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) with water (H2O), and acetonitrile (CH3CN) for which experimental DR data are available. On comparison, predicted DR time scales show close agreement with the measured DR times at low IL mole fractions (xIL). At higher IL concentrations (xIL > 0.05), the theory over-estimates the relaxation times and increasingly deviates from the measurements with xIL, deviation being the maximum for the neat IL by almost two orders of magnitude. The theory predicts negligible contributions to this deviation from the xIL dependent collective orientational static correlations. The drastic difference between DR time scales for IL/solvent mixtures from theory and experiments arises primarily due to the use of the actual molecular volume ( Vmol dip ) for the rotating dipolar moiety in the present theory and suggests that only a fraction of Vmol dip is involved at high xIL. Expectedly, nice agreement between theory and experiments appears when experimental

  11. Conductive polymer as a controlled microenvironment for the potentiometric high-throughput evaluation of ionic liquid cell toxicity.

    PubMed

    Qiu, Weilian; Zeng, Xiangqun

    2008-09-01

    This paper presents both biological and potentiometric evaluations of the cell toxicity of a widely used ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)), to Chinese hamster lung fibroblast cells (V79 cell line). The innovative potentiometric study takes advantage of the unique properties of conductive polymer polypyrrole (PPY) for the potentiometric evaluation of cell toxicity of [bmim]BF(4) to the V79 cells in a real-time, noninvasive and high-throughput manner. The conductive polymer PPY provides a controlled microenvironment that allows the quantitative release of the anions of the ionic liquids into the cells being monitored in real time and noninvasively. Parallel biological assay results showed that V79 cells exposed to [bmim]BF(4) usually grew in clusters, and that many small vacuoles could be seen in the cytoplasm. At the 24th hour after the V79 cells had been exposed to the ionic liquid (IL), the half inhibition concentration (EC(50)) of [bmim]BF(4) was around 5 mM. From a cell cycle study performed using a FACScan flow cytometer, it was found that the V79 cells could be partially locked to the G(1) phase by [bmim]BF(4), which extended the doubling time for cell growth. Comparing with the EC(50) values of cadmium chloride and mercury chloride, [bmim]BF(4) is not very toxic, but it may have a long-term toxic effect on mammalian cells. Compared to traditional biological in vitro assays, the use of a conductive polymer substrate in combination with a potentiometric sensor array is much more sensitive, faster, and enables a simpler evaluation of chemical cell toxicity. Additionally, it simplifies the study of the reversibility of cell toxicity, i.e., cell recovery, because there is no need to refresh the culture medium since a finite amount of chemicals can be doped and released. We found that the cytotoxicity of [bmim]BF(4) at a concentration of less than 6 mM was reversible for the V79 cell line, because cell morphology and

  12. A counter-charge layer in generalized solvents framework for electrical double layers in neat and hybrid ionic liquid electrolytes

    SciTech Connect

    Huang, Jingsong; Feng, Guang; Sumpter, Bobby G; Qiao, Rui; Meunier, Vincent

    2011-01-01

    Room-temperature ionic liquids (RTILs) have received significant attention as electrolytes due to a number of attractive properties such as their wide electrochemical windows. Since electrical double layers (EDLs) are the cornerstone for the applications of RTILs in electrochemical systems such as supercapacitors, it is important to develop an understanding of the structure capacitance relationships for these systems. Here we present a theoretical framework termed counter-charge layer in generalized solvents (CGS) for describing the structure and capacitance of the EDLs in neat RTILs and in RTILs mixed with different mass fractions of organic solvents. Within this framework, an EDL is made up of a counter-charge layer exactly balancing the electrode charge, and of polarized generalized solvents (in the form of layers of ion pairs, each of which has a zero net charge but has a dipole moment the ion pairs thus can be considered as a generalized solvent) consisting of all RTILs inside the system except the counter-ions in the counter-charge layer, together with solvent molecules if present. Several key features of the EDLs that originate from the strong ion ion correlation in RTILs, e.g., overscreening of electrode charge and alternating layering of counter-ions and co-ions, are explicitly incorporated into this framework. We show that the dielectric screening in EDLs is governed predominately by the polarization of generalized solvents (or ion pairs) in the EDL, and the capacitance of an EDL can be related to its microstructure with few a priori assumptions or simplifications. We use this framework to understand two interesting phenomena observed in molecular dynamics simulations of EDLs in a neat IL of 1-butyl-3- methylimidazolium tetrafluoroborate ([BMIM][BF4]) and in a mixture of [BMIM][BF4] and acetonitrile (ACN): (1) the capacitance of the EDLs in the [BMIM][BF4]/ACN mixture increases only slightly when the mass fraction of ACN in the mixture increases from zero

  13. Dielectric relaxation in ionic liquid/dipolar solvent binary mixtures: A semi-molecular theory.

    PubMed

    Daschakraborty, Snehasis; Biswas, Ranjit

    2016-03-14

    A semi-molecular theory is developed here for studying dielectric relaxation (DR) in binary mixtures of ionic liquids (ILs) with common dipolar solvents. Effects of ion translation on DR time scale, and those of ion rotation on conductivity relaxation time scale are explored. Two different models for the theoretical calculations have been considered: (i) separate medium approach, where molecularities of both the IL and dipolar solvent molecules are retained, and (ii) effective medium approach, where the added dipolar solvent molecules are assumed to combine with the dipolar ions of the IL, producing a fictitious effective medium characterized via effective dipole moment, density, and diameter. Semi-molecular expressions for the diffusive DR times have been derived which incorporates the effects of wavenumber dependent orientational static correlations, ion dynamic structure factors, and ion translation. Subsequently, the theory has been applied to the binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) with water (H2O), and acetonitrile (CH3CN) for which experimental DR data are available. On comparison, predicted DR time scales show close agreement with the measured DR times at low IL mole fractions (x(IL)). At higher IL concentrations (x(IL) > 0.05), the theory over-estimates the relaxation times and increasingly deviates from the measurements with x(IL), deviation being the maximum for the neat IL by almost two orders of magnitude. The theory predicts negligible contributions to this deviation from the x(IL) dependent collective orientational static correlations. The drastic difference between DR time scales for IL/solvent mixtures from theory and experiments arises primarily due to the use of the actual molecular volume (V(mol)(dip)) for the rotating dipolar moiety in the present theory and suggests that only a fraction of V(mol)(dip) is involved at high x(IL). Expectedly, nice agreement between theory and experiments appears when

  14. Modulation of the aggregation properties of sodium deoxycholate in presence of hydrophilic imidazolium based ionic liquid: water dynamics study to probe the structural alteration of the aggregates.

    PubMed

    Kundu, Niloy; Banik, Debasis; Roy, Arpita; Kuchlyan, Jagannath; Sarkar, Nilmoni

    2015-10-14

    In this article, we have investigated the effect of a hydrophilic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]-BF4), on the aggregation properties of a biological surfactant, sodium deoxycholate (NaDC), in water. In solution, unlike conventional surfactants it shows stepwise aggregation and the effect of the conventional ionic liquid on the aggregation properties is rather interesting. We have observed concentration dependent dual role of the ionic liquid; at their low concentration, the aggregated structure of NaDC reorganizes itself into an elongated rod like structure. However, the aggregated network is disintegrated into small aggregates upon further addition of ionic liquid. TEM (Transmission Electron Microscopy), SEM (Scanning Electron Microscopy) and FLIM (Fluorescence Lifetime Imaging Microscopy) images also confirmed the structural alteration of NaDC upon varying the concentration of the ionic liquid. The proton NMR data indicate that hydrophobic as well as electrostatic interaction is solely responsible for such structural adaptation of NaDC in the presence of an ionic liquid. The host-guest interaction inside the aggregates is monitored using Coumarin-153 (C-153) and the location of C-153 is probed by varying the excitation wavelength from 375 nm to 440 nm and the two binding sites of the aggregates are affected in a different fashion in the presence of ionic liquid. Excitation in the blue region selects the fluorophores which preferably bind to the buried region of the aggregates, whereas 440 nm excitation corresponds to the guest molecules which are exposed to the solvent molecules. The average solvation time of C-153 is increased in the presence of 1.68 wt% [bmim]-BF4 at λexc = 440 nm i.e. the probe molecules relocate themselves to a more restricted region. However, the average solvation time became 2.6 times faster in the presence of 11.2 wt% [bmim]-BF4, which corresponds to a more polar and exposed region. The time resolved

  15. Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis.

    PubMed

    Łuczak, Justyna; Paszkiewicz, Marta; Krukowska, Anna; Malankowska, Anna; Zaleska-Medynska, Adriana

    2016-01-01

    Ionic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in the Part 1 of this review paper. Part 2 of the paper gives a comprehensive overview of recent experimental studies dealing with application of ionic liquids for preparation of metal and semiconductor based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids is presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting and ray-mediated methods (microwave, ultrasound, UV-radiation and γ-radiation). It was found that ionic liquids formed of a 1-butyl-3-methylimidazolium [BMIM] combined with tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethanesulfonyl)imide [Tf2N] are the most often used ILs in the synthesis of nano- and microparticles, due to their low melting temperature, low viscosity and good transportation properties. Nevertheless, examples of other IL classes with intrinsic nanoparticles stabilizing abilities such as phosphonium and ammonium derivatives are also presented. Experimental data revealed that structure of ILs (both anion and cation type) affects the size and shape of formed metal particles, and in some cases may even determine possibility of particles formation. The nature of the metal precursor determines its affinity to polar or nonpolar domains of ionic liquid, and therefore, the size of the nanoparticles depends on the size of these regions. Ability of ionic liquids to form varied extended interactions with particle precursor as well as other compounds presented in the reaction media (water, organic solvents etc.) provides nano- and

  16. Tetramethylammonium tetrafluoroborate: The smallest quaternary ammonium tetrafluoroborate salt for use in electrochemical double layer capacitors

    NASA Astrophysics Data System (ADS)

    Park, Sieun; Kim, Ketack

    2017-01-01

    Tetramethylammonium (TMA) ion is the smallest quaternary ammonium ion (QAI) that can be used in electrochemical double layer capacitor (EDLC) applications. Small ions improve the capacitance of EDLCs by increasing the adsorbed ionic density. Herein, we first report the utilization of TMA BF4 in EDLCs and the properties of the smallest QAI are investigated. However, because of the poor solubility of TMA BF4, it must be combined with another salt, forming a binary-salt electrolyte. In this study, the maximum TMA BF4 concentration used was 5 mol%. These binary salt mixtures contain a conventional electrolyte salt such as tetraethylammonium BF4, trimethylethylammonium BF4, or spiro-bipyrrolidinium BF4. In addition, 4-5 mol% TMA BF4 was added to the conventional salt solution and a binary-salt electrolyte was obtained, leading to 12-13% increase in the capacitance compared to that of a 100 mol% conventional electrolyte at 10 A g-1. This work proposes a new method to improve the performance of EDLCs by using binary-salt electrolytes.

  17. Accurate measurements of thermodynamic properties of solutes in ionic liquids using inverse gas chromatography.

    PubMed

    Mutelet, Fabrice; Jaubert, Jean-Noël

    2006-01-13

    Activity coefficients at infinite dilution of 29 organic compounds in two room temperature ionic liquids were determined using inverse gas chromatography. The measurements were carried out at different temperatures between 323.15 and 343.15K. To establish the influence of concurrent retention mechanisms on the accuracy of activity coefficients at infinite dilution for 1-butyl-3-methylimidazolium octyl sulfate and 1-ethyl-3-methylimidazolium tosylate, phase loading studies of the net retention volume per gram of packing as a function of the percent phase loading were used. It is shown that most of the solutes are retained largely by partition with a small contribution from adsorption on 1-butyl-3-methylimidazolium octyl sulfate and that the n-alkanes are retained predominantly by interfacial adsorption on 1-ethyl-3-methylimidazolium tosylate.

  18. Ionic liquids-lithium salts pretreatment followed by ultrasound-assisted extraction of vitexin-4″-O-glucoside, vitexin-2″-O-rhamnoside and vitexin from Phyllostachys edulis leaves.

    PubMed

    Hou, Kexin; Chen, Fengli; Zu, Yuangang; Yang, Lei

    2016-01-29

    An efficient method for the extraction of vitexin, vitexin-4″-O-glucoside, and vitexin-2″-O-rhamnoside from Phyllostachys edulis leaves comprises heat treatment using an ionic liquid-lithium salt mixture (using 1-butyl-3-methylimidazolium bromide as the solvent and lithium chloride as the additive), followed by ultrasound-assisted extraction. To obtain higher extraction yields, the effects of the relevant experimental parameters (including heat treatment temperature and time, relative amounts of 1-butyl-3-methylimidazolium bromide and lithium chloride, power and time of the ultrasound irradiation, and the liquid-solid ratio) are evaluated and response surface methodology is used to optimize the significant factors. The morphologies of the treated and untreated P. edulis leaves are studied by scanning electron microscopy. The improved extraction method proposed provides high extraction yield, good repeatability and precision, and has wide potential applications in the analysis of plant samples.

  19. Preparation of tamarind gum based soft ion gels having thixotropic properties.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2014-02-15

    Tamarind gum was used to prepare ion gels using both synthetic ionic liquids (ILs) namely 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium bromide and bio-based ionic liquids (Bio-ILs) namely choline acrylate, choline caproate and choline caprylate by heating cooling process. The gels were found to have good thermal stability and exhibited thixotropic behaviour. Upon relaxation after applied breaking strain, the recovery of gel structures after ten consecutive cycles was observed. The hydrogel of the gum prepared using ethanol aqueous solution had much inferior quality in terms of viscosity, viscoelasticity, thermal stability and thixotropicity when compared with the ion gels. The ion gels also showed very good adherence to human finger muscles and skin. The ion gels thus prepared may find application in electrochemistry, sensors, actuators and the gels prepared with Bio-ILs could even be useful in biomedical applications.

  20. Anion effects in the extraction of lanthanide 2-thenoyltrifluoroacetone complexes into an ionic liquid

    SciTech Connect

    Jensen, Mark P.; Beitz, James V.; Rickert, Paul G.; Borkowski, Marian; Laszak, Ivan; Dietz, Mark L.

    2012-07-01

    The extraction of trivalent lanthanides from an aqueous phase containing 1 M NaClO{sub 4} into the room temperature ionic liquid 1-butyl-3-methylimidazolium nonafluoro-1-butane sulfonate by the beta-diketone extractant 2-thenoyltrifluoroacetone (Htta) was studied. Radiotracer distribution, absorption spectroscopy, time-resolved laser-induced fluorescence spectroscopy, and X-ray absorption fine structure measurements point to the extraction of multiple lanthanide species. At low extractant concentrations, fully hydrated aqua cations of the lanthanides are present in the ionic liquid phase. As the extractant concentration is increased 1:2 and 1:3 lanthanide:tta species are observed. In contrast, 1:4 Ln:tta complexes were observed in the extraction of lanthanides by Htta into 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide. (authors)

  1. Effect of the conditions of anodizing on the morphology of nanotitania

    NASA Astrophysics Data System (ADS)

    Root, N. V.; Kultin, D. Yu.; Kustov, L. M.; Kudryavtsev, I. K.; Lebedeva, O. K.

    2017-02-01

    The effect the current density, treatment time, surface pretreatment, and electrolyte composition have on the morphology of titania obtained via electrochemical treatment in such ionic liquids (ILs) as 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf2] and 1-butyl-3-methylimidazolium chloride [BMIM]Cl is studied. The anodic formation of titania nanostructures in the form of nanotubes or nanorods is found to occur in times of up to 100 s. The role of water in the formation of these titania nanostructures is shown. Pretreatment has no effect on the morphology of the formed oxide. The formation of products that are poorly soluble in ILs (e.g., hydrated oxides) results in the emergence of a layer partially covering the open parts of nanotubes, preventing their further growth.

  2. Organo-niobate Ionic Liquids: Synthesis, Characterization and Application as Acid Catalyst in Pechmann Reactions

    PubMed Central

    Soares, Valerio C. D.; Alves, Melquizedeque B.; Souza, Ernesto R.; Pinto, Ivana O.; Rubim, Joel C.; Andrade, Carlos Kleber Z.; Suarez, Paulo A. Z.

    2007-01-01

    The combinations of 1-butyl-3-methylimidazolium chloride with NbCl5 yielded ionic mixtures with different melting point temperatures and acidity depending on the niobium molar fraction. The mixtures were characterized by thermal (DSC) and spectroscopic (FT-IR and 1H NMR) analysis. The Pechmann reactions of different phenols with ethylacetoacetate, producing coumarins, was used as model to evaluate the catalytic behavior of these mixtures as acid Lewis catalyst. These reactions were carried out using acidic mixtures of 60 mol%.

  3. Cellulose/gold nanocrystal hybrids via an ionic liquid/aqueous precipitation route.

    PubMed

    Li, Zhonghao; Taubert, Andreas

    2009-11-18

    Injection of a mixture of HAuCl(4) and cellulose dissolved in the ionic liquid (IL) 1-butyl-3-methylimidazolium chloride [Bmim]Cl into aqueous NaBH4 leads to colloidal gold nanoparticle/cellulose hybrid precipitates. This process is a model example for a very simple and generic approach towards (noble) metal/cellulose hybrids, which could find applications in sensing, sterile filtration, or as biomaterials.

  4. Influence of cation structure on binary liquid-liquid equilibria for systems containing ionic liquids based on trifluoromethanesulfonate anion with hydrocarbons.

    PubMed

    Marciniak, Andrzej; Karczemna, Ewa

    2010-04-29

    Binary liquid-liquid equilibria for 15 systems containing an ionic liquid (1-butyl-3-methylimidazolium trifluoromethanesulfonate, 1-butyl-3-methylpyridinium trifluoromethanesulfonate, 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate) with a hydrocarbon (n-hexane, n-heptane, cyclohexane, benzene, toluene) were measured by the dynamic method. The influence of cation structure of trifluoromethanesulfonate anion based ionic liquids on solubility of aliphatic and aromatic hydrocarbons is discussed.

  5. Femtosecond Raman-Induced Kerr Effect Study of Temperature-Dependent Intermolecular Dynamics in Imidazolium-Based Ionic Liquids: Effects of Anion Species and Cation Alkyl Groups.

    PubMed

    Kakinuma, Shohei; Ishida, Tateki; Shirota, Hideaki

    2017-01-12

    The temperature dependence of the intermolecular vibrational dynamics in imidazolium-based ionic liquids (ILs) with 10 different anions was studied by femtosecond Raman-induced Kerr effect spectroscopy. For all ILs investigated in this study, the intensity in the low-frequency region below 50 cm(-1) increases, and the spectral density in the high-frequency region above 80 cm(-1) decreases (and shows a redshift) with increasing temperature. The first phenomenon would be attributed to the activation of the translational vibrational motions, whereas the second one is ascribed to the slowing librational motion of the imidazolium ring with increasing temperature. Calculated spectra of the density of states for the intermolecular vibrations of 1-butyl-3-methylimidazolium hexafluorophosphate, which is one of the experiment samples studied here, obtained by molecular dynamics simulation agreed well with the experimental results and confirmed the spectral assignments. When we compared the difference spectra between spectra measured at various temperatures and the spectrum measured at 293 K, a clear difference was found in the ∼50 cm(-1) region of the Kerr spectra of 1-butyl-3-methylimidazolium thiocyanate and 1-butyl-3-methylimidazolium dicyanamide from those of the other ILs. The difference might have originated from the librational motions of the corresponding anions. We also compared the temperature-dependent Kerr spectra of hexafluorophosphate salts of 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium, and 1-heptyl-3-methylimidazolium cations. These ILs showed a similar temperature dependence, which was not affected by the alkyl group length. The temperature-dependent viscosities and glass transition temperatures of the ILs were also estimated to determine their fragilities.

  6. Sensor technologies based on a cellulose supported platform.

    PubMed

    Poplin, Jane Holly; Swatloski, Richard P; Holbrey, John D; Spear, Scott K; Metlen, Andreas; Grätzel, Michael; Nazeeruddin, Mohammad K; Rogers, Robin D

    2007-05-28

    A simple approach to sensor development based on encapsulating a probe molecule in a cellulose support followed by regeneration from an ionic liquid solution is demonstrated here by the codissolution of cellulose and 1-(2-pyridylazo)-2-naphthol in 1-butyl-3-methylimidazolium chloride followed by regeneration with water to form strips which exhibit a proportionate (1 : 1) response to Hg(II) in aqueous solution.

  7. Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples.

    PubMed

    Xia, Gao; Jing, Fan; Guifen, Zhu; Xiaolong, Wang; Jianji, Wang

    2013-10-01

    A novel 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted solid-phase sorbent was synthesized. The as-prepared material was characterized by SEM, Brunauer-Emmett-Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C(n)mimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1-butyl-3-methyl imidazolium chloride ionic liquid. The average recoveries of 1-butyl-3-methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0-102.0% with the RSD lower than 5.8%.

  8. Effects of Tetrafluoroborate and Bis(trifluoromethylsulfonyl)amide Anions on the Microscopic Structures of 1-Methyl-3-octylimidazolium-Based Ionic Liquids and Benzene Mixtures: A Multiple Approach by ATR-IR, NMR, and Femtosecond Raman-Induced Kerr Effect Spectroscopy.

    PubMed

    Shirota, Hideaki; Kakinuma, Shohei; Itoyama, Yu; Umecky, Tatsuya; Takamuku, Toshiyuki

    2016-01-28

    The microscopic aspects of the two series of mixtures of 1-methyl-3-octylimidazolium tetrafluoroborate ([MOIm][BF4])-benzene and 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)amide ([MOIm][NTf2])-benzene were investigated by several spectroscopic techniques such as attenuated total reflectance IR (ATR-IR), NMR, and fs-Raman-induced Kerr effect spectroscopy (fs-RIKES). All three different spectroscopic results indicate that the anions more strongly interact with the cations in the [MOIm][BF4]-benzene mixtures than in the [MOIm][NTf2]-benzene mixtures. This also explains the different miscibility features between the two mixture systems well. The xC6H6 dependences of the chemical shifts and the C-H out-of-plane bending mode of benzene are similar: the changes are large in the high benzene concentration (xC6H6 > ∼ 0.6) compared to the low benzene concentration. In contrast, the linear xC6H6 dependences of the first moments of the low-frequency spectra less than 200 cm(-1) were observed in both the [MOIm][BF4]-benzene and [MOIm][NTf2]-benzene systems. The difference in the xC6H6 dependent features between the chemical shifts and intramolecular vibrational mode and the intermolecular/interionic vibrational bands might come from the different probing space scales. The traces of the parallel aromatic ring structure and the T-shape structure were found in the ATR-IR and NMR experiments, but fs-RIKES did not observe a clear trace of the local structure. This might imply that the interactions between the imidazolium and benzene rings are not strong enough to librate the imidazolium and benzene rings together. The bulk properties, such as miscibility, density, viscosity, and surface tension, of the two ionic liquid-benzene mixture series were also compared to the microscopic aspects.

  9. Supramolecular aggregation of inorganic molecules at Au(111) electrodes under a strong ionic atmosphere.

    PubMed

    Fu, Yong-Chun; Su, Yu-Zhuan; Wu, De-Yin; Yan, Jia-Wei; Xie, Zhao-Xiong; Mao, Bing-Wei

    2009-10-21

    Neutral inorganic molecules are generally weak in surface adsorption and intermolecular interactions. Self-assembly of such types of molecule would provide valuable information about various interactions. At electrochemical interfaces, the relative strength of these interactions may be modified through control of electrode potential and electrolyte, which may lead to the discovery of new structures and new phenomena. However, studies of this nature are as yet lacking. In this work, we consider the covalent-bound semimetal compound molecules, XCl(3) (X = Sb, Bi), as model systems of neutral inorganic molecules to investigate their self-assembly at electrochemical interfaces under a high ionic atmosphere. To fulfill such investigations, in situ STM and cyclic voltammetry are employed, and comparative experiments are performed on Au(111) in ionic liquids as well as aqueous solutions with high ionic strength. In the room temperature ionic liquid of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF(4)), potential-dependent partial charge transfer between the Au surface and XCl(3) molecules creates a molecule-surface interaction and provides the driving force for adsorption of the molecules. Supramolecular aggregations of adsorbed XCl(3) are promoted through chlorine-based short-range intermolecular correlation under crystallographic constraint, while repulsive Coulombic interactions created between the partially charged aggregations facilitate their long-range ordering. For SbCl(3) molecules, hexagonally arranged 6- or 7-member clusters are formed at 0.08 to -0.2 V (vs Pt), which assemble into a secondary ( radical31 x radical31)R8.9 degrees structure. For BiCl(3) molecules, both the 6-membered hexagonal and 3-membered trigonal clusters are formed in the narrow potential range -0.3 to -0.35 V, and are also arranged into an ordered secondary structure. Comparative studies were performed with SbCl(3) in concentrated aqueous solutions containing 2 M HCl to simulate the

  10. Lithium ion conductive behavior of TiO2 nanotube/ionic liquid matrices

    PubMed Central

    2014-01-01

    A series of TiO2 nanotube (TNT)/ionic liquid matrices were prepared, and their lithium ion conductive properties were studied. SEM images implied that ionic liquid was dispersed on the whole surface of TNT. Addition of TNT to ionic liquid (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide (BMImTFSA)) resulted in significant increase of ionic conductivity. Furthermore, lithium transference number was also largely enhanced due to the interaction of anion with TNT. Vogel-Fulcher-Tammann parameter showed higher carrier ion number for TNT/BMImTFSA in comparison with BMImTFSA. PMID:25313300

  11. Synthesis of (S)-ricinoleic acid and its methyl ester with the participation of ionic liquid.

    PubMed

    Kula, Józef; Bonikowski, Radoslaw; Szewczyk, Malgorzata; Ciolak, Kornelia

    2014-10-01

    (R)-ricinoleic acid methyl ester obtained from commercial castor oil was transformed in a three-step procedure into its S-enantiomer in overall 36% yield using ionic liquid (1-butyl-3-methylimidazolium acetate) in the key step process. The developed procedure provides easy access to (S)-ricinoleic acid and its methyl ester of over 95% enantiomeric excess. Optical rotations of the newly obtained compounds as well as their chromatographic and spectral characteristics are provided and discussed in the context of enantiopurity both of the substrate material and the final products.

  12. A study of the time-resolved fluorescence spectrum and red edge effect of ANF in a room-temperature ionic liquid.

    PubMed

    Hu, Zhonghan; Margulis, Claudio J

    2006-06-15

    In a recent article, we have analyzed using molecular dynamics simulations the steady-state red edge effect (REE) observed by Samanta and co-workers when the fluorescent probe 2-amino-7-nitrofluorene (ANF) is photoexcited at different wavelengths in 1-butyl-3-methylimidazolium ([BMIM+]) hexafluorophosphate ([PF6-]). In this letter, we predict the time- and wavelength-dependent emission spectra of ANF in the same ionic solvent. From the analysis of our simulated data, we are able to derive an approximate time scale for reorganization of the solvent around the solute probe. The effect that slow varying local liquid environments have on the overall time-dependent signal is also discussed.

  13. Electrodeposition of Three Dimensionally Ordered Macroporous Germanium from Two Different Ionic Liquids.

    PubMed

    Hao, Jian; Zhao, Jiupeng; Zhang, Yiwen; An, Xiaokun; Liu, Xin; Li, Yao; Endres, Frank

    2016-01-01

    Three dimensionally ordered macroporous (3DOM) Ge films have been made via ordered polystyrene (PS) templates by electrodeposition from ionic liquids 1-Butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) amide and 1-Ethyl-3-methylimidazolium tris (pentafluoroethyl) trifluorophosphate at room temperature. We discuss the possibility of obtaining high quality 3DOM Ge films from two different ionic liquids by the simple and inexpensive template-assisted electrochemical pathway. Scanning electron microscopy confirms the quality of the samples, and the optical measurements demonstrate that 3DOM Ge made electrochemically shows photonic crystal behavior. Such a material has the potential to make 3DOM Ge feasible for electrical, optical applications and for photonic crystal solar cells.

  14. Fabrication and Characterization of Polysaccharide Ion Gels with Ionic Liquids and Their Further Conversion into Value-Added Sustainable Materials

    PubMed Central

    Takada, Akihiko; Kadokawa, Jun-ichi

    2015-01-01

    A review of the fabrication of polysaccharide ion gels with ionic liquids is presented. From various polysaccharides, the corresponding ion gels were fabricated through the dissolution with ionic liquids. As ionic liquids, in the most cases, 1-butyl-3-methylimidazolium chloride has been used, whereas 1-allyl-3methylimidazolium acetate was specifically used for chitin. The resulting ion gels have been characterized by suitable analytical measurements. Characterization of a pregel state by viscoelastic measurement provided the molecular weight information. Furthermore, the polysaccharide ion gels have been converted into value-added sustainable materials by appropriate procedures, such as exchange with other disperse media and regeneration. PMID:25793912

  15. Structural study of lysozyme in two ionic liquids at cryogenic temperature

    NASA Astrophysics Data System (ADS)

    Yoshimura, Yukihiro; Takekiyo, Takahiro; Mori, Takahiro

    2016-11-01

    We have investigated the structure and activity of chicken egg-white lysozyme in aqueous solutions of two typical ionic liquids, 1-butyl-3-methylimidazolium chloride and ethylammonium nitrate, at cryogenic temperature. An increase in structural disorder due to the unfolding and a decrease in the α-helical structure of lysozyme were noticeable upon glass formation. However, a decrease in the structural stability after cooling was less than that before cooling. The secondary and tertiary structures showed good reversibility upon cooling to 77 K and then reverting back to ambient temperature. We discussed an influence of a cooling upon the structure in aqueous ionic liquid solutions.

  16. Lipid extraction from microalgae using a single ionic liquid

    DOEpatents

    Salvo, Roberto Di; Reich, Alton; Dykes, Jr., H. Waite H.; Teixeira, Rodrigo

    2013-05-28

    A one-step process for the lysis of microalgae cell walls and separation of the cellular lipids for use in biofuel production by utilizing a hydrophilic ionic liquid, 1-butyl-3-methylimidazolium. The hydrophilic ionic liquid both lyses the microalgae cell walls and forms two immiscible layers, one of which consists of the lipid contents of the lysed cells. After mixture of the hydrophilic ionic liquid with a suspension of microalgae cells, gravity causes a hydrophobic lipid phase to move to a top phase where it is removed from the mixture and purified. The hydrophilic ionic liquid is recycled to lyse new microalgae suspensions.

  17. Microwave-assisted rapid conversion of carbohydrates into 5-hydroxymethylfurfural by ScCl3 in ionic liquids.

    PubMed

    Zhou, Xuanmu; Zhang, Zehui; Liu, Bing; Xu, Zheng; Deng, Kejian

    2013-06-28

    In this study, synthesis of HMF from carbohydrates was carried out in ionic liquids 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) catalyzed by ScCl3 under microwave irradiation. Under the optimal reaction conditions, HMF was obtained in a high yield of 73.4% in 2 mins with the microwave power at 400 W. Compared with the conventional oil-bath heating manner, the use of microwave irradiation not only reduced reaction times from hours to minutes, but also improved HMF yield. This catalytic system could be reused several times without losing its catalytic activity. This efficient catalytic system will generate a promising application strategy for biomass transformation.

  18. Recombination of Photogenerated Lophyl Radicals in Imidazolium-Based Ionic Liquids

    SciTech Connect

    Strehmel, V.; Wishart, J.; Polyansky, D.E.; Strehmel, B.

    2009-10-20

    Laser flash photolysis is applied to study the recombination reaction of lophyl radicals in ionic liquids in comparison with dimethylsulfoxide as an example of a traditional organic solvent. The latter exhibits a similar micropolarity as the ionic liquids. The ionic liquids investigated are 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (1), 1-hexyl-3-methylimidazolium hexafluorophosphate (2), and 1-butyl-3-methylimidazolium tetafluoroborate (3). The recombination of the photolytic generated lophyl radicals occur significantly faster in the ionic liquids than expected from their macroscopic viscosities and is a specific effect of these ionic liquids. On the other hand, this reaction can be compared with the macroscopic viscosity in the case of dimethylsulfoxide. Activation parameters obtained for lophyl radical recombination suggest different, anion-dependent mechanistic effects. Quantum chemical calculations based on density functional theory provide a deeper insight of the molecular properties of the lophyl radical and its precursor. Thus, excitation energies, spin densities, molar volumes, and partial charges are calculated. Calculations show a spread of spin density over the three carbon atoms of the imidazolyl moiety, while only low spin density is calculated for the nitrogens.

  19. Effects of substituents and substitution positions on alkaline stability of imidazolium cations and their corresponding anion-exchange membranes.

    PubMed

    Si, Zhihong; Qiu, Lihua; Dong, Huilong; Gu, Fenglou; Li, Youyong; Yan, Feng

    2014-03-26

    Imidazolium cations with butyl groups at various substitution positions (N1-, C2-, and N3-), 1-butyl-2,3-dimethylimidazolium ([N1-BDMIm](+)), 2-butyl-1,3-dimethylimidazolium ([C2-BDMIm](+)), and 3-butyl-1,2-dimethylimidazolium ([N3-BDMIm](+)), were synthesized. Quantitative (1)H NMR spectra and density functional theory calculation were applied to investigate the chemical stability of the imidazolium cations in alkaline solutions. The results suggested that the alkaline stability of the imidazolium cations was drastically affected by the C2-substitution groups. The alkaline stability of imidazolium cations with various substitution groups at the C2-position, including 2-ethyl-1-butyl-3-methylimidazolium ([C2-EBMIm](+)), 1,2-dibutyl-3-methylimidazolium ([C2-BBMIm](+)), and 2-hydroxymethyl-1-butyl-3-methylimidazolium ([C2-HMBMIm](+)), was further studied. The butyl group substituted imidazolium cation ([C2-BBMIm](+)) exhibited the highest alkaline stability at the elevated temperatures. The synthesized anion-exchange membranes based on the [C2-BBMIm](+) cation showed promising alkaline stability. These observations should pave the way to the practical application of imidazolium-based anion exchange membrane fuel cells.

  20. The Highly Selective and Near-Quantitative Conversion of Glucose to 5-Hydroxymethylfurfural Using Ionic Liquids

    PubMed Central

    Eminov, Sanan; Brandt, Agnieszka; Wilton-Ely, James D. E. T.

    2016-01-01

    A number of ionic liquids have been shown to be excellent solvents for lignocellulosic biomass processing, and some of these are particularly effective in the production of the versatile chemical building block 5-hydroxymethylfurfural (HMF). In this study, the production of HMF from the simple sugar glucose in ionic liquid media is discussed. Several aspects of the selective catalytic formation of HMF from glucose have been elucidated using metal halide salts in two distinct ionic liquids, 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium hydrogen sulfate as well as mixtures of these, revealing key features for accelerating the desired reaction and suppressing byproduct formation. The choice of ionic liquid anion is revealed to be of particular importance, with low HMF yields in the case of hydrogen sulfate-based salts, which are reported to be effective for HMF production from fructose. The most successful system investigated in this study led to almost quantitative conversion of glucose to HMF (90% in only 30 minutes using 7 mol% catalyst loading at 120°C) in a system which is selective for the desired product, has low energy intensity and is environmentally benign. PMID:27711238

  1. Ionic liquid-linked dual magnetic microextraction of lead(II) from environmental samples prior to its micro-sampling flame atomic absorption spectrometric determination.

    PubMed

    Yilmaz, Erkan; Soylak, Mustafa

    2013-11-15

    A novel and rapid microextraction approach termed as ionic liquid-linked dual magnetic microextraction (IL-DMME), was developed for the atomic absorption spectrometric determination of lead. The developed method based on a combination of dispersive liquid-liquid microextraction (DLLME) and dispersive micro solid-phase extraction (D-μ-SPE). In the first DLLME step, 1-butyl-3-methylimidazolium hexafluorophosphate [C4mim][PF6], was selected to extract the lead-pyrrolidine-dithiocarbamate (Pb-PDC) complex from sample solution by the assistance of vortex agitator. After the first step, fifty milligrams of Fe3O4 magnetic nanoparticles (MNPs) were added to extraction of the ionic liquid and Pb-PDC complex in aqueous solution. The effective factors in proposed IL-DMME procedure, including volume of 1-butyl-3-methylimidazolium hexafluorophosphate, amount of Fe3O4 magnetic nanoparticles, vortex time, amount of ammonium pyrrolidinedithiocarbamate, sample volume and matrix effect were optimized in details. Under the optimal conditions, the method present has low detection limit (0.57 μg L(-1)), high preconcentration factor (160) and good repeatability (<7.5%, n=10). The accuracy of the developed method was evaluated by the analysis of the certified reference materials and addition-recovery tests. The method was successfully applied to the determination of lead in water, plant and hair samples.

  2. Mutual and thermal diffusivity of binary mixtures of the ionic liquids [BMIM][C(CN)3] and [BMIM][B(CN)4] with dissolved CO2 by dynamic light scattering.

    PubMed

    Rausch, Michael H; Heller, Andreas; Herbst, Jonas; Koller, Thomas M; Bahlmann, Matthias; Schulz, Peter S; Wasserscheid, Peter; Fröba, Andreas P

    2014-05-01

    Ionic liquids (ILs) are promising solvents for gas separation processes such as carbon dioxide (CO2) capture from flue gases. For the design of corresponding processes and apparatus, thermophysical properties of ILs containing dissolved gases are required. In the present study, it is demonstrated that with a single optical setup, mutual and thermal diffusivities as well as refractive indices can be measured quasi-simultaneously for such mixtures. Dynamic light scattering (DLS) from bulk fluids was applied to determine mutual and thermal diffusivities for mixtures of 1-butyl-3-methylimidazolium tricyanomethanide ([BMIM][C(CN)3]) or 1-butyl-3-methylimidazolium tetracyanoborate ([BMIM][B(CN)4]) with dissolved CO2 at temperatures from 303.15 to 333.15 K and pressures between 2 and 26 bar in macroscopic thermodynamic equilibrium. Good agreement with literature data and only slight differences between the diffusivities measured for the two systems at the same temperature and comparable mole fractions of CO2 were found. Increasing mutual diffusivities with increasing mole fractions of CO2 are consistent with decreasing viscosities reported for other IL-CO2 mixtures in the literature and can be attributed to weakening of molecular interactions by the dissolved gas. For the conditions studied, no dependence of the thermal diffusivity on the temperature or the mole fraction of CO2 could be found.

  3. Heats of vaporization of room temperature ionic liquids by tunable vacuum ultraviolet photoionization

    SciTech Connect

    Chambreau, Steven D.; Vaghjiani, Ghanshyam L.; To, Albert; Koh, Christine; Strasser, Daniel; Kostko, Oleg; Leone, Stephen R.

    2009-11-25

    The heats of vaporization of the room temperature ionic liquids (RTILs) N-butyl-N-methylpyrrolidinium bistrifluorosulfonylimide, N-butyl-N-methylpyrrolidinium dicyanamide, and 1-butyl-3-methylimidazolium dicyanamide are determined using a heated effusive vapor source in conjunction with single photon ionization by a tunable vacuum ultraviolet synchrotron source. The relative gas phase ionic liquid vapor densities in the effusive beam are monitored by clearly distinguished dissociative photoionization processes via a time-of-flight mass spectrometer at a tunable vacuum ultraviolet beamline 9.0.2.3 (Chemical Dynamics Beamline) at the Advanced Light Source synchrotron facility. Resulting in relatively few assumptions, through the analysis of both parent cations and fragment cations, the heat of vaporization of N-butyl-N-methylpyrrolidinium bistrifluorosulfonylimide is determined to be Delta Hvap(298.15 K) = 195+-19 kJ mol-1. The observed heats of vaporization of 1-butyl-3-methylimidazolium dicyanamide (Delta Hvap(298.15 K) = 174+-12 kJ mol-1) and N-butyl-N-methylpyrrolidinium dicyanamide (Delta Hvap(298.15 K) = 171+-12 kJ mol-1) are consistent with reported experimental values using electron impact ionization. The tunable vacuum ultraviolet source has enabled accurate measurement of photoion appearance energies. These appearance energies are in good agreement with MP2 calculations for dissociative photoionization of the ion pair. These experimental heats of vaporization, photoion appearance energies, and ab initio calculations corroborate vaporization of these RTILs as intact cation-anion ion pairs.

  4. Alkylation of Methyl Linoleate with Propene in Ionic Liquids in the Presence of Metal Salts.

    PubMed

    Pomelli, Christian Silvio; Ghilardi, Tiziana; Chiappe, Cinzia; de Angelis, Alberto Renato; Calemma, Vincenzo

    2015-12-07

    Vegetable oils and fatty acid esters are suitable precursor molecules for the production of a variety of bio-based products and materials, such as paints and coatings, plastics, soaps, lubricants, cosmetics, pharmaceuticals, printing inks, surfactants, and biofuels. Here, we report the possibility of using Lewis acidic ionic liquids (ILs) to obtain polyunsaturated ester dimerization-oligomerization and/or, in the presence of another terminal alkene (propene), co-polymerization. In particular, we have tested the Lewis acidic mixtures arising from the addition of a proper amount of GaCl₃ (Χ > 0.5) to two chloride-based (1-butyl-3-methylimidazolium chloride, [bmim]Cl, and 1-butylisoquinolium chloride, [BuIsoq]Cl) or by dissolution of a smaller amount of Al(Tf₂N)₃ (Χ = 0.1) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][Tf₂N]. On the basis of product distribution studies, [bmim][Tf₂N]/Al(Tf₂N)₃ appears the most suitable medium in which methyl linoleate alkylation with propene can compete with methyl linoleate or propene oligomerization.

  5. Solvent extraction separation of Th-227 and Ac-225 in room temperature ionic liquids

    SciTech Connect

    Bell, Jason R; Boll, Rose Ann; Dai, Sheng; Luo, Huimin

    2012-01-01

    The solvent extractions of Th-227 and Ac-225 from the aqueous phase into ionic liquids (ILs) were investigated by using N,N,N ,N - tetraoctyldiglycolamide (TODGA) or di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant. Four ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim][NTf2]), 1-butyl-3-methylimidazolium bis(perfluoroethanesulfonyl)imide ([C4mim][BETI]), 1-butyl-2,3-trimethyleneimidazolium (trifluoromethanesulfonyl)imide [BuI5][NTf2], and 1-benzyl pyridinium bis(trifluoromethanesulfonyl)imide ([PhCH2Py][NTf2]) were used as extraction solvents for separation of Th-227 and Ac-225 in this study. Excellent extraction efficiencies and selectivities were found for Th-227/Ac-225 when HDEHP was used as an extractant in these ionic liquids. The effects of different extractant concentrations in ionic liquids and acidities of the aqueous phase on extraction efficiencies and selectivities of Th-227/Ac-225 are also presented in this article.

  6. Surface tension of room temperature ionic liquids measured by dynamic light scattering.

    PubMed

    Osada, R; Hoshino, T; Okada, K; Ohmasa, Y; Yao, M

    2009-05-14

    Using dynamic light scattering techniques, we obtained the surface tension sigma, surface excess entropy S(sigma), surface excess enthalpy H(sigma), and viscosity eta for the following seven room temperature ionic liquids in a wide temperature range from 30 to around 140 degrees C: 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide, N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide, 1-butyl-3-methylimidazolium hexafluorophosphate, 1-hexyl-3-methylimidazolium hexafluorophosphate, and 1-octyl-3-methyl imidazolium hexafluorophosphate. We have found that sigma increases systematically with decreasing the anion size and the alkyl side chain length. On the other hand, S(sigma) and eta increase with decreasing the anion size but decrease with decreasing the alkyl chain length. H(sigma) seems to decrease with increasing the anion size, but it has no clear dependence on the alkyl chain length. We discuss the bulk and surface properties, referring to the Coulomb interactions and van der Waals interactions.

  7. Surface tension of room temperature ionic liquids measured by dynamic light scattering

    NASA Astrophysics Data System (ADS)

    Osada, R.; Hoshino, T.; Okada, K.; Ohmasa, Y.; Yao, M.

    2009-05-01

    Using dynamic light scattering techniques, we obtained the surface tension σ, surface excess entropy S(σ), surface excess enthalpy H(σ), and viscosity η for the following seven room temperature ionic liquids in a wide temperature range from 30 to around 140 °C: 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide, N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide, 1-butyl-3-methylimidazolium hexafluorophosphate, 1-hexyl-3-methylimidazolium hexafluorophosphate, and 1-octyl-3-methyl imidazolium hexafluorophosphate. We have found that σ increases systematically with decreasing the anion size and the alkyl side chain length. On the other hand, S(σ) and η increase with decreasing the anion size but decrease with decreasing the alkyl chain length. H(σ) seems to decrease with increasing the anion size, but it has no clear dependence on the alkyl chain length. We discuss the bulk and surface properties, referring to the Coulomb interactions and van der Waals interactions.

  8. Rotational Diffusion of Charged and Nondipolar Solutes in Ionic Liquid-Organic Solvent Mixtures: Evidence for Stronger Specific Solute-Solvent Interactions in Presence of Organic Solvent.

    PubMed

    Prabhu, Sugosh R; Dutt, G B

    2015-08-20

    Rotational diffusion of a charged solute, rhodamine 110 (R110), and a nondipolar solute, 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DMDPP), has been investigated in ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM][Tf2N]) and 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([BMIM][FAP]), with 0.8 mole fraction of dibenzyl ether (DBE). This study has been undertaken to find out how specific interactions between the solute and the ionic liquid are affected upon dilution with a nondipolar solvent. It has been observed that at a given viscosity (η) and temperature (T), the reorientation times of R110 increase by 40-60% in the ionic liquid-organic solvent mixtures compared to ones in the corresponding neat ionic liquids. In the case of DMDPP, the influence of DBE is less pronounced, and its reorientation times increase by 25-50% at a given η/T. The addition of DBE weakens the numerous interactions prevailing between the cations and the anions of the ionic liquids, which results in stronger specific interactions between the solutes and the constituent ions, consequently leading to slower rotation of the solutes.

  9. Ionic liquid-based dispersive liquid-liquid microextraction followed by RP-HPLC determination of saquinavir in rat serum: application to pharmacokinetics.

    PubMed

    Ramisetti, Nageswara Rao; Nimmu, Narendra Varma; Challa, Gangu Naidu

    2014-12-01

    An ionic liquid-based dispersive liquid-liquid microextraction followed by RP-HPLC determination of the most commonly prescribed protease inhibitor, saquinavir, in rat plasma was developed and validated. The effects of different ionic liquids, dispersive solvents, extractant/disperser ratio and salt concentration on sample recovery and enrichment were studied. Among the ionic liquids investigated, 1-butyl-3-methylimidazolium hexafluorophosphate was found to be most effective for extraction of saquinavir from rat serum. The recovery was found to be 95% at an extractant/disperser ratio of 0.43 using 1-butyl-3-methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents. The recovery was further enhanced to 99.5% by addition of 5.0% NaCl. A threefold enhancement in detection and quantification limits was achieved, at 0.01 and 0.03 µg/mL, compared with the conventional protein precipitation method. A linear relationship was observed in the range of 0.035-10.0 µg/mL with a correlation coefficient (r(2) ) of 0.9996. The method was validated and applied to study pharmacokinetics of saquinavir in rat serum.

  10. Molecular dynamics study of ionic liquids complexation within β-cyclodextrins.

    PubMed

    Semino, Rocío; Rodríguez, Javier

    2015-04-09

    We have studied 1:1 inclusion complexes of two imidazole-based ionic liquids within β-cyclodextrin: 1-dodecyl-3-methylimidazolium and 1-butyl-3-methylimidazolium. By means of an adaptive biasing force scheme, we obtained the free energy profile along two different pathways, differing in the orientations of the head-to-tail vector with respect to the primary-secondary rim axis. Regarding 1-dodecyl-3-methylimidazolium, we found one minimum energy structure for each pathway, in which the hydrophobic tail remains embedded within the cyclodextrin, while the headgroup lies ∼11-12 Å from one of the rims; the structure where the polar head lies near the primary rim is the most stable. The analysis of the free energy of encapsulation of 1-butyl-3-methylimidazolium shows two minima for each insertion pathway, each of them associated with configurations where the imidazolium head lies close to one of the polar rims. As such, the most stable structure corresponds to one where the hydrophobic tail lies embedded within the cyclodextrin, while its head is localized near the secondary rim. The results are interpreted in terms of a simple model which captures the essential features that control the encapsulation process. A comparison with available experimental data is presented.

  11. Oxidative desulfurization of dibenzothiophene from model oil using ionic liquids as extracting agent

    NASA Astrophysics Data System (ADS)

    Taha, Mohd F.; Atikah, N.; Chong, F. K.; Shaharun, Maizatul S.

    2012-09-01

    The oxidative desulfurization of dibenzothiophene (DBT) from model oil (in n-dodecane) was carried out using ionic liquid as the extractant and catalyst, and hydrogen peroxide (H2O2) in combination with acetic acid (CH3COOH) and sulphuric acid (H2SO4) as the oxidant. The ionic liquids used were 1-butyl-3-methylimidazolium octyl sulphate ([Bmim][OcSO4]) and 1-butyl-3-methylimidazolium acetate ([Bmim][Ac]). The effect of the amounts of H2O2 on oxidative desulphurization of model oil was first investigated without the usage of ionic liquids at room temperature. The results indicate that greater amount of H2O2 give higher desulfurization and the maximum desulfurization in this study, i.e. 34 %, was occurred when the molar ratio of H2O2 to sulfur was 5:1. With the usage of ionic liquid and the molar ratio of 5:1 (H2O2:sulfur), the efficiency of DBT removal from model oil was increased significantly in terms of percent removal and removal time. Ionic liquid of [Bmim][OcSO4] performed better than [Bmim][Ac] with 72 % DBT removal. When molar ratio of H2O2 to sulphur was 5:1, volume ratio of ionic liquid to model oil was 1:1 and mixing time was 60 min at room temperature. The results indicate the potential of ionic liquids as the extractant and catalyst for oxidative desulfurization of hydrocarbon fuels.

  12. Heteroatom-Containing Porous Carbons Derived from Ionic Liquid-Doped Alkali Organic Salts for Supercapacitors.

    PubMed

    Zhu, Jingyue; Xu, Dan; Qian, Wenjing; Zhang, Jinyu; Yan, Feng

    2016-04-13

    A simple strategy for the synthesis of heteroatom-doped porous carbon materials (CMs) via using ionic liquid (IL)-doped alkali organic salts as small molecular precursors is developed. Doping of alkali organic salts (such as sodium glutamate, sodium tartrate, and sodium citrate) with heteroatoms containing ILs (including 1-butyl-3-methylimidazolium chlorine and 3-butyl-4-methythiazolebromination) not only incorporates the heteroatoms into the carbon frameworks but also highly improves the carbonization yield, as compared with that of either alkali organic salts or ILs as precursors. The porous structure of CMs can be tuned by adjusting the feed ratio of ILs. The porous CMs derived from 1-butyl-3-methylimidazolium chlorine-doped sodium glutamate exhibit high charge storage capacity with a specific capacitance of 287 F g(-1) and good stability over 5000 cycles in 6 m KOH at a current density of 1 A g(-1) for supercapacitors. This strategy opens a simple and efficient method for the synthesis of heteroatom-doped porous CMs.

  13. Functionalized Agarose Self-Healing Ionogels Suitable for Supercapacitors.

    PubMed

    Trivedi, Tushar J; Bhattacharjya, Dhrubajyoti; Yu, Jong-Sung; Kumar, Arvind

    2015-10-12

    Agarose has been functionalized (acetylated/carbanilated) in an ionic liquid (IL) medium of 1-butyl-3-methylimidazolium acetate at ambient conditions. The acetylated agarose showed a highly hydrophobic nature, whereas the carbanilated agarose could be dissolved in water as well as in the IL medium. Thermoreversible ionogels were obtained by cooling the IL sols of carbanilated agarose at room temperature. The ionogel prepared from a protic-aprotic mixed-IL system (1-butyl-3-methylimidazolium chloride and N-(2-hydroxyethyl)ammonium formate) demonstrated a superior self-healing property, as confirmed from rheological measurements. The superior self-healing property of such an ionogel has been attributed to the unique inter-intra hydrogen-bonding network of functional groups inserted in the agarose. The ionogel was tested as a flexible solid electrolyte for an activated-carbon-based supercapacitor cell. The measured specific capacitance was found to be comparable with that of a liquid electrolyte system at room temperature and was maintained for up to 1000 charge-discharge cycles. Such novel functionalized-biopolymer self-healing ionogels with flexibility and good conductivity are desirable for energy-storage devices and electronic skins with superior lifespans and robustness.

  14. Immobilization of pectinase on silica-based supports: Impacts of particle size and spacer arm on the activity.

    PubMed

    Alagöz, Dilek; Tükel, S Seyhan; Yildirim, Deniz

    2016-06-01

    The pectinase was separately immobilized onto Florisil and nano silica supports through both glutaraldehyde and 3-glyoxypropyltrietoxysilane spacer arms. The effects of spacer arm, particle size of support and ionic liquids on the activities of pectinase preparations were investigated. The immobilization of pectinase onto Florisil and nano silica through 3-glyoxypropyltrietoxysilane spacer arm completely led to inactivation of enzyme; however, 10 and 75% pectinase activity were retained when it was immobilized through glutaraldehyde spacer arm onto Florisil and nano silica, respectively. The pectinase immobilized onto nano silica through glutaraldehyde spacer arm showed 6.3-fold higher catalytic efficiency than that of the pectinase immobilized onto Florisil through same spacer arm. A 2.3-fold increase in thermal stability of pectinase was provided upon immobilization onto nano silica at 35°C. The effects of IL/buffer mixture and volume ratio of IL/buffer mixture on the catalytic activities of free and immobilized pectinase preparations were also tested. All the pectinase preparations showed highest activity in 10% (v/v) 1-butyl-3-methylimidazolium hexafluorophosphate containing medium and their activities significantly affected from the concentration of 1-butyl-3-methylimidazolium hexafluorophosphate.

  15. Extraction of ranitidine and nizatidine with using imidazolium ionic liquids prior spectrophotometric and chromatographic detection.

    PubMed

    Kiszkiel, Ilona; Starczewska, Barbara; Leśniewska, Barbara; Późniak, Patrycja

    2015-03-15

    A new extraction medium was proposed for liquid-liquid extraction of the histamine H2 receptor antagonists ranitidine (RNT) and nizatidine (NZT). The ionic liquids with low vapor pressure and favorable solvating properties for a range of compounds such as 1-butyl-3-methylimidazolium hexafluorophosphate [C4mim][PF6] and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C4mim][Tf2N] were tested for isolation of analytes. The extraction parameters of RNT and NZT, namely, amount of ionic liquid, pH of sample solution, shaking and centrifugation time were optimized. The isolation processes were performed with 1 mL of the ionic liquids. The extracted samples (pH values near 4) were shaken at 1750 rpm. The influence of interfering substances on the efficiency of extraction process was also studied. Methods for the histamine H2 receptor antagonists (ranitidine and nizatidine) determination after their separation using imidazolium ionic liquids by high performance liquid chromatography (HPLC) combined with UV spectrophotometry were developed. The application of ionic liquids in extraction step allows for selective isolation of analytes from aqueous matrices and their preconcentration. The above methods were applied to the determination of RNT and NZT in environmental samples (river water and wastewater after treatment).

  16. Determination of rifaximin in rat serum by ionic liquid based dispersive liquid-liquid microextraction combined with RP-HPLC.

    PubMed

    Rao, Ramisetti Nageswara; Vali, Rajavarapu Mastan; Rao, Alamanda Vara Prasada

    2012-08-01

    An efficient and environmental friendly ionic liquid based dispersive liquid-liquid microextraction procedure was optimized for determination of rifaximin in rat serum by reverse phase high-performance liquid chromatography. The effect of ionic liquids, dispersive solvents, extractant/disperser ratio, and salt concentrations on sample recovery and enrichment factors were studied. Among the five ionic liquids studied in the present investigation, 1-butyl-3-methylimidazolium hexafluorophosphate was found to be most effective for extraction of rifaximin. The recovery was found to be more than 98% using 1-butyl-3-methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents, at an extractant/disperser ratio of 0.43. The recovery was further enhanced to 99.5% by the addition of 5.0% NaCl solution. A threefold enhancement in detection limit was achieved when compared to protein precipitation. The ionic liquid containing the extracted rifaximin was directly injected into HPLC system. The linear relationship was observed in the range of 0.03-10.0 μg/mL with the correlation coefficient (r(2)) 0.9998. Limits of detection and quantification were found to be 0.01 and 0.03 μg/mL, respectively. The relative standard deviation was 2.5%. The method was validated and applied to study pharmacokinetics of rifaxmin in rat serum.

  17. Scalable procedure for the fragmentation of hydroperoxides mediated by copper and iron tetrafluoroborate salts†

    PubMed Central

    Huang, David; Schuppe, Alexander W.; Liang, Michael Z.

    2016-01-01

    An improved protocol for the formal elimination of propene from organic substrates is reported. This process entails the ozonolytic conversion of an alkene to a methoxy hydroperoxide which undergoes fragmentation mediated by copper and iron. The use of soluble Cu(BF4)2 and Fe(BF4)2 results in reproducible results up to a 100 gram scale. PMID:27273761

  18. Reactions of Ions with Ionic Liquid Vapors by Selected-Ion Flow Tube Mass Spectrometry.

    PubMed

    Chambreau, Steven D; Boatz, Jerry A; Vaghjiani, Ghanshyam L; Friedman, Jeffrey F; Eyet, Nicole; Viggiano, A A

    2011-04-21

    Room-temperature ionic liquids exert vanishingly small vapor pressures under ambient conditions. Under reduced pressure, certain ionic liquids have demonstrated volatility, and they are thought to vaporize as intact cation-anion ion pairs. However, ion pair vapors are difficult to detect because their concentration is extremely low under these conditions. In this Letter, we report the products of reacting ions such as NO(+), NH4(+), NO3(-), and O2(-) with vaporized aprotic ionic liquids in their intact ion pair form. Ion pair fragmentation to the cation or anion as well as ion exchange and ion addition processes are observed by selected-ion flow tube mass spectrometry. Free energies of the reactions involving 1-ethyl-3-methylimidazolium bis-trifluoromethylsulfonylimide determined by ab initio quantum mechanical calculations indicate that ion exchange or ion addition are energetically more favorable than charge-transfer processes, whereas charge-transfer processes can be important in reactions involving 1-butyl-3-methylimidazolium dicyanamide.

  19. Fabrication of normally-off AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors by photo-electrochemical gate recess etching in ionic liquid

    NASA Astrophysics Data System (ADS)

    Zhang, Zhili; Qin, Shuangjiao; Fu, Kai; Yu, Guohao; Li, Weiyi; Zhang, Xiaodong; Sun, Shichuang; Song, Liang; Li, Shuiming; Hao, Ronghui; Fan, Yaming; Sun, Qian; Pan, Gebo; Cai, Yong; Zhang, Baoshun

    2016-08-01

    We characterized an ionic liquid (1-butyl-3-methylimidazolium nitrate, C8H15N3O3) as a photo-electrochemical etchant for fabricating normally-off AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs). Using the ionic liquid, we achieved an etching rate of ˜2.9 nm/min, which is sufficiently low to facilitate good etching control. The normally-off AlGaN/GaN MIS-HEMT was fabricated with an etching time of 6 min, with the 20 nm low-pressure chemical vapor deposition (LPCVD) silicon nitride (Si3N4) gate dielectric exhibiting a threshold voltage shift from -10 to 1.2 V, a maximum drain current of more than 426 mA/mm, and a breakdown voltage of 582 V.

  20. Atomic Resolution Insights into the Structural Aggregations and Optical Properties of Neat Imidazolium-Based Ionic Liquids.

    PubMed

    Du, Likai; Geng, Cuihuan; Zhang, Dongju; Lan, Zhenggang; Liu, Chengbu

    2016-07-14

    A fundamental understanding of the structural heterogeneity and optical properties of ionic liquids is crucial for their potential applications in catalysis, optical measurement, and solar cells. Herein, a synergistic approach combining molecular dynamics simulations, excited-state calculations, and statistical analysis was used to explore the explicit correlation between the structural and optical properties of one imidazolium amino acid-based ionic liquid, 1-butyl-3-methylimidazolium glycine. The estimated absorption spectrum successfully rationalizes the unusual and non-negligible absorption band beyond 300 nm for the neat imidazolium-based ionic liquid. The absorption behavior of imidazolium-based ionic liquids is shown to be sensitive to the details of their locally heterogeneous environments. We quantitatively highlight the imidazolium moiety and its various molecular aggregations, rather than the monomeric imidazolium moiety, that are responsible for the absorption characteristics. These results would improve our understanding of the preliminary interplay between structural heterogeneity and optical properties for neat imidazolium-based ionic liquids.

  1. An efficient one-pot synthesis, characterization and antibacterial activity of novel chromeno-pyrimidine derivatives

    NASA Astrophysics Data System (ADS)

    Suresh, Lingala; Kumar, P. Sagar Vijay; Chandramouli, G. V. P.

    2017-04-01

    A simple and efficient one-pot three component, green protocol was established for the synthesis of chromenopyrano[2,3-d]pyrimidine derivatives starting from 3-amino-pyrano[2,3-c]chromene-2-carbonitrile, N,N-dimethylformamide dimethylacetal and aromatic amines in the presence of 1-butyl-3-methylimidazolium hydrogen sulphate[Bmim]HSO4 ionic liquid. The present procedure offers a domino reaction strategy, cleaner conversion, short reaction times and high yields. Among the screened derivatives, the compounds 4g and 4h were identified as lead molecules which established promising antimicrobial towards Gram-positive bacterial strains such as Staphylococcus aureus MTCC 96, Staphylococcus aureus MLS16 MTCC 2940 and Bacillus subtilis MTCC 121.

  2. Trivalent actinide and lanthanide separations using tetraalkyldiglycolamides (TCnDGA) in molecular and ionic liquid diluents

    SciTech Connect

    Bruce J. Mincher; Robert V. Fox; Mary E. Mincher; Chien M. Wai

    2014-09-01

    The use of the diglycolamide, tetrabutyldiglycolamide was investigated for intergroup separations of the lanthanides, focusing especially on those lanthanides (Y, Ce, Eu, Tb, Dy, Er, and Yb) found in lighting phosphors. Tetrabutyldiglycolamide extraction efficiency for the lanthanides varied depending on whether the diluent was the conventional molecular diluent 1-octanol, the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide, or a mixture of the two. This was attributed to extraction of either neutral, cationic or anionic lanthanide metal complexes with nitrate ion. Based on the batch contact solvent extraction results measured here, a series of extractions providing product streams containing separated Y, Ce, Eu, Tb/Dy, and Er/Yb are proposed.

  3. Surface Nanocrystallization of an Ionic Liquid

    SciTech Connect

    Jeon, Yoonnam; Vaknin, David; Bu, Wei; Sung, Jaeho; Ouchi, Yukio; Sung, Woongmo; Kim, Doseok

    2012-03-26

    Surface crystallization at the vapor-liquid interface of the ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) is observed in synchrotron x-ray diffraction studies. Sharp Bragg reflections emerge in grazing-angle x-ray diffraction patterns 37 C above the bulk melting temperature, indicating the presence of a long-range ordered phase at the surface in coexistence with the bulk parent liquid. The unique structure of the vapor-liquid interface where butyl chains attached to the cations are expelled to the vapor side facilitates interionic electrostatic interactions that lead to the crystallization. Our results demonstrate the complexity of ionic-liquid structure with their tendency to spontaneously phase separate into nanodomains with finite correlation lengths in coexistence with the liquid phase. By virtue of interfacial boundary conditions, these nanodomains grow laterally to form quasi-two-dimensional crystals.

  4. Development of sample preparation method for isoliquiritigenin, liquiritin, and glycyrrhizic acid analysis in licorice by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection.

    PubMed

    Yang, Lei; Li, Li-li; Liu, Ting-ting; Zu, Yuan-gang; Yang, Feng-jian; Zhao, Chun-jian; Zhang, Lin; Chen, Xiao-qiang; Zhang, Zhong-hua

    2013-05-01

    An ionic liquid-based ultrasonic-assisted extraction (ILUAE) method had been used for the effective extraction of isoliquiritigenin (IQ), liquiritin (LQ) and glycyrrhizic acid (GA) from licorice. The ionic liquids with different cations and anions were investigated in this work and 0.5 M 1-butyl-3-methylimidazolium bromide solution was selected as solvent. In addition, the technical parameters including soaking time, solid-liquid ratio, ultrasonic power and time were optimized. Compared with the conventional solvent extraction, the proposed approach exhibited higher efficiency, which indicated the ILUAE was an efficient, rapid and simple sample preparation technique. There was no degradation of the target analytes had been observed at the optimum conditions which was evidenced by the stability studies performed with standard of IQ, LQ and GA. The proposed method also showed high reproducibility and was environmental friendly.

  5. Biodiesel production using alkaline ionic liquid and adopted as lubricity additive for low-sulfur diesel fuel.

    PubMed

    Luo, Hui; Fan, Weiyu; Li, Yang; Nan, Guozhi

    2013-07-01

    Preparation of biodiesel from vegetable oils, such as rapeseed oil, soybean oil and sunflower oil, catalyzed by an alkaline ionic liquid 1-butyl-3-methylimidazolium imidazolide ([Bmim]Im) was investigated in this work. The results demonstrated that [Bmim]Im exhibited high activity and the yield of biodiesel was up to 95% or more when molar ratio of methanol to vegetable oil was 6:1, ionic liquid dosage was 6 wt.%, reaction temperature was 60°C, and reaction time was 60 min. After [Bmim]Im was used for the sixth time, the yield of biodiesel still remained at about 95%. The effects of the biodiesels on the lubricity of low-sulfur diesel fuel were also investigated using the High Frequency Reciprocating Rig method, and the results showed that sunflower biodiesel and soybean biodiesel had higher lubrication performance than that of rapeseed biodiesel.

  6. An electrochemical fungicide pyrimethanil sensor based on carbon nanotubes/ionic-liquid construction modified electrode.

    PubMed

    Yang, Jichun; Wang, Qiong; Zhang, Minhui; Zhang, Shuming; Zhang, Lei

    2015-11-15

    In this study, a simple, rapid, sensitive and environmentally friendly electroanalytical detection method for pyrimethanil (PMT) was developed, which was based on multi-walled carbon nanotubes (MWCNTs) and ionic liquids (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) modified glassy carbon electrode (GCE). MWCNTs-IL modified electrode significantly enhanced the oxidation peak current of PMT by combining the excellent electrochemical properties of MWCNTs and IL, suggesting that the modified electrode can remarkably improve the sensitivity of PMT detection. Under the optimum conditions, this electrochemical sensor exhibited a linear concentration range for PMT of 1.0 × 10(-7)-1.0 × 10(-4) mol L(-1) and the detection limit was 1.6 × 10(-8) mol L(-1) (S/N = 3). The fabricated electrode showed good reproducibility, stability and anti-interference, and also it was successfully employed to detect PMT in real samples.

  7. Evaluation of a hydrophilic ionic liquid as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system for aqueous biphasic extraction separation.

    PubMed

    Hirayama, Naoki; Higo, Takaaki; Imura, Hisanori

    2012-01-01

    The use of a hydrophilic ionic liquid (IL), 1-butyl-3-methylimidazolium chloride (C(4)mimCl), as a salting-out phase separation agent to a water-tetrahydrofuran homogeneous system was studied for possible applications to novel aqueous biphasic extraction separation. The IL showed a salting-out phase-separation ability. Also, differences in the polarity between the formed two phases were smaller than that when using NaCl as a salting-out agent. This result suggested that C(4)mimCl remaining in water-rich phase acts not only as a salting-out agent, but also a component of a mixed-solvent. Possible uses of C(4)mimCl/NaCl mixed salting-out agent system were also discussed.

  8. The effect of surfactant-assisted ultrasound-ionic liquid pretreatment on the structure and fermentable sugar production of a water hyacinth.

    PubMed

    Chang, Ken-Lin; Han, Ye-Ju; Wang, Xiao-Qin; Chen, Xi-Mei; Leu, Shao-Yuan; Liu, Jing-Yong; Peng, Yen-Ping; Liao, Yu-Ling; Potprommanee, Laddawan

    2017-02-15

    This study investigated the possibility of enhancing the disruption of water hyacinth (WH) in an ultrasound-ionic liquid (US-IL) pretreatment assisted by sodium dodecyl sulfate (SDS). 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was used to dissolve the WH. The optimum concentration of SDS for the highest production of reducing sugar was also determined. Compared to the US-IL pretreatment, the production of reducing sugars, cellulose conversion and delignification were increased by 72.23%, 58.74% and 21.01%, respectively, upon addition of 0.5% SDS. Moreover, the enhancement of SDS in the US-IL pretreatment was confirmed by the analysis of structural features, which demonstrated that the SDS increased the removal of lignin and decreased the cellulose crystallinity.

  9. Controlling hydrolysis reaction rates with binary ionic liquid mixtures by tuning hydrogen-bonding interactions.

    PubMed

    Weber, Cameron C; Masters, Anthony F; Maschmeyer, Thomas

    2012-02-16

    The ability of a binary ionic liquid (IL) system consisting of a phosphonium transition state analogue (TSA) and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][NTf(2)]) to accelerate the rate of the well-studied hydrolysis of a tert-alkyl picolinium salt by influencing the solvent structure was investigated. A significant rate enhancement was observed in the presence of the TSA; however, comparison with other cations illustrated that this enhancement was not unique to the chosen TSA. Instead, the rate enhancements were correlated with the dilution of hydrogen bonding by the added cations. This phenomenon was further examined by the use of 1-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide ([BMMIM][NTf(2)]) as a cosolvent and the use of Reichardt's dye to measure the extent of hydrogen bonding on solutes in these systems. The rate increases are rationalized in terms of weaker hydrogen bonding from the solvent system to water.

  10. [Te8][NbOCl4]2 containing an infinite chain-like {[Te-Te-Te-(Te5)]2+}n polycation.

    PubMed

    Feldmann, Claus; Freudenmann, Dominic

    2012-10-01

    The title compound, [Te(8)][NbOCl(4)](2), was obtained as translucent black crystals by reaction of elemental tellurium, niobium(V) chloride and niobium(V) oxychloride in the ionic liquid BMImCl (BMImCl is 1-butyl-3-methylimidazolium chloride). The synthesis was performed in argon-filled glass ampoules. According to X-ray structure analysis based on single crystals, the title compound crystallizes with triclinic lattice symmetry and consists of infinite {[Te(8)](2+)}(n) cations associated with pyramidal [NbOCl(4)](-) anions. The novel catena-octatellurium(2+) cation is composed of Te(5) rings that are linked via Te(3) units [Te-Te = 2.6455 (18)-2.8164 (19) Å]. The composition and purity of [Te(8)][NbOCl(4)](2) were further confirmed by energy-dispersive X-ray diffraction (EDX) analysis.

  11. Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization.

    PubMed

    Li, Jihua; Wei, Xiaoyi; Wang, Qinghuang; Chen, Jiacui; Chang, Gang; Kong, Lingxue; Su, Junbo; Liu, Yuhuan

    2012-11-06

    Nanocellulose from sugarcane bagasse was isolated by high pressure homogenization in a homogeneous media. Pretreatment with an ionic liquid (1-butyl-3-methylimidazolium chloride ([Bmim]Cl)) was initially involved to dissolve the bagasse cellulose. Subsequently, the homogeneous solution was passed through a high pressure homogenizer without any clogging. The nanocellulose was obtained at 80 MPa for 30 cycles with recovery of 90% under the optimum refining condition. Nanocellulose had been characterized by Fourier transformed infrared spectra, X-ray diffraction, thermogravimetric analysis, rheological measurements and transmission electron microscopy. The results showed that nanocellulose was 10-20 nm in diameter, and presented lower thermal stability and crystallinity than the original cellulose. The developed nanocellulose would be a very versatile renewable material.

  12. Separation of lignin from corn stover hydrolysate with quantitative recovery of ionic liquid

    SciTech Connect

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

    2015-02-20

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent biorenewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. In this paper, we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. Finally, the isolated lignin is not only free from ionic liquid but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals.

  13. Performance of Liquid Phase Exfoliated Graphene As Electrochemical Double Layer Capacitors Electrodes

    NASA Astrophysics Data System (ADS)

    Huffstutler, Jacob; Wasala, Milinda; Richie, Julianna; Winchester, Andrew; Ghosh, Sujoy; Kar, Swastik; Talapatra, Saikat

    2014-03-01

    We will present the results of our investigations of electrochemical double layer capacitors (EDLCs) or supercapacitors (SC) fabricated using liquid-phase exfoliated graphene. Several electrolytes, such as aqueous potassium hydroxide KOH (6M), ionic 1-Butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6], and ionic 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate[BMP][FAP] were used. These EDLC's show good performance compared to other carbon nanomaterials based EDLC's devices. We found that the liquid phase exfoliated graphene based devices possess specific capacitance values as high as 262 F/g, when used with ionic liquid electrolyte[BMP][FAP], with power densities (~ 454 W/kg) and energy densities (~ 0.38Wh/kg). Further, these devices indicated rapid charge transfer response even without the use of any binders or specially prepared current collectors. A detailed electrochemical impedance spectroscopy analysis in order to understand the phenomenon of charge storage in these materials will be presented.

  14. Development of sample preparation method for eleutheroside B and E analysis in Acanthopanax senticosus by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection.

    PubMed

    Yang, Lei; Ge, Hongshuang; Wang, Wenjie; Zu, Yuangang; Yang, Fengjian; Zhao, Chunjian; Zhang, Lin; Zhang, Ying

    2013-12-01

    An ionic liquids-based ultrasonic-assisted extraction (ILUAE) method was successfully developed for extracting eleutheroside B and E from Radix Acanthopanax senticosus. Thirteen 1-alkyl-3-methylimidazolium ionic liquids with different cations and anions were investigated and 1-butyl-3-methylimidazolium bromide ([C4mim]Br) solution was selected as the solvent. The conditions for ILUAE, including the ionic liquid concentration, soaking time, ultrasonic power, ultrasonic time, solid-liquid ratio and number of extraction cycles, were optimized. With the proposed method, the energy consumption time was reduced to 30 min, whereas conventional method requires about 4h. The proposed method had good recovery (97.96-103.39%) and reproducibility (RSD, n=5; 3.3% for eleutheroside B, 4.6% for eleutheroside E). ILUAE was an efficient, rapid and simple sample preparation technique that showed high reproducibility and was environmental friendly.

  15. Application of a nanostructured sensor based on NiO nanoparticles modified carbon paste electrode for determination of methyldopa in the presence of folic acid

    NASA Astrophysics Data System (ADS)

    Fouladgar, Masoud; Ahmadzadeh, Saeid

    2016-08-01

    A new method for determination of methyldopa in the presence of folic acid has been described in this work. This method is based on modification of carbon paste electrode with NiO nanoparticles and an ionic liquid (1-Butyl-3-methylimidazolium hexafluorophosphate). Electrochemical studies showed that on the surface of modified electrode, oxidation current of methyldopa has been enhanced and shifted to negative potentials. The fabricated electrode exhibited a linear response to concentration of methyldopa from 0.1 to 700.0 μmol L-1. The sensitivity of the modified electrode to methyldopa not changed in the presence of folic acid and simultaneous or independent measurements of them are possible. The performance of proposed method was investigated by determination of methyldopa in real samples.

  16. Dissolution of cellulose in ionic liquid: A review

    NASA Astrophysics Data System (ADS)

    Mohd, N.; Draman, S. F. S.; Salleh, M. S. N.; Yusof, N. B.

    2017-02-01

    Dissolution of cellulose with ionic liquids (IL) and deep eutectic solvent (DES) lets the comprehensive dissolution of cellulose. Basically, cellulose can be dissolved, in some hydrophilic ionic liquids, such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-allyl-3-methylimidazolium chloride (AMIMCl). Chloride based ionic liquids are suitable solvents for cellulose dissolution. Although the ILs is very useful in fine chemical industry, its application in the pharmaceutical and food industry have been very limited due to issues with toxicity, purity, and high cost. Seeing to these limitations, new green alternative solvent which is DES was used. This green solvents, may be definitely treated as the next-generation reagents for more sustainable industrial development. Thus, this review aims to discuss the dissolution of cellulose either with ionic liquids or DES and its application.

  17. Spectroscopic analysis of 1-butyl-2,3-dimethylimidazolium ionic liquids: Cation-anion interactions

    NASA Astrophysics Data System (ADS)

    Men, Shuang; Jiang, Jing; Licence, Peter

    2017-04-01

    In this study, four 1-butyl-2,3-dimethylimidazolium ionic liquids are analysed by X-ray photoelectron spectroscopy, together with three 1-butyl-3-methylimidazolium ionic liquids. A reliable fitting model for the carbon 1s region of 1-butyl-2,3-dimethylimidazolium ionic liquids is modified according to established models. The effect of the anion on the electronic environment of the cation is explored based upon the comparison between measured binding energies of nitrogen 1s and the hydrogen bond acceptor ability. The effect of the cation on the cation-anion interaction is also demonstrated by carefully comparing the hydrogen bond donating ability of different cations, with a definite anion.

  18. Development of Ionic Liquid Modified Disposable Graphite Electrodes for Label-Free Electrochemical Detection of DNA Hybridization Related to Microcystis spp.

    PubMed

    Sengiz, Ceren; Congur, Gulsah; Erdem, Arzum

    2015-09-09

    In this present study, ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (IL)) modified pencil graphite electrode (IL-PGEs) was developed for electrochemical monitoring of DNA hybridization related to Microcystis spp. (MYC). The characterization of IL-PGEs was performed using microscopic and electrochemical techniques. DNA hybridization related to MYC was then explored at the surface of IL-PGEs using differential pulse voltammetry (DPV) technique. After the experimental parameters were optimized, the sequence-selective DNA hybridization related to MYC was performed in the case of hybridization between MYC probe and its complementary DNA target, noncomplementary (NC) or mismatched DNA sequence (MM), or and in the presence of mixture of DNA target: NC (1:1) and DNA target: MM (1:1).

  19. Preparation and characterisation of high-density ionic liquids incorporating halobismuthate anions.

    PubMed

    Cousens, Nico E A; Taylor Kearney, Leah J; Clough, Matthew T; Lovelock, Kevin R J; Palgrave, Robert G; Perkin, Susan

    2014-07-28

    A range of ionic liquids containing dialkylimidazolium cations and halobismuthate anions ([BiBr(x)Cl(y)I(z)](-) and [Bi2Br(x)Cl(y)I(z)](-)) were synthesised by combining dialkylimidazolium halide ionic liquids with bismuth(III) halide salts. The majority were room temperature liquids, all with very high densities. The neat ionic liquids and their mixtures with 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide were characterised using Densitometry, Viscometry, NMR Spectroscopy, Electrospray Ionisation Mass Spectrometry (ESI), Liquid Secondary Ion Mass Spectrometry (LSIMS), Matrix-assisted Laser Desorption/Ionization Mass Spectrometry (MALDI), X-Ray Photoelectron Spectroscopy (XPS) and Thermogravimetric Analysis (TGA), to establish their speciation and suitability for high-temperature applications.

  20. Development of Ionic Liquid Modified Disposable Graphite Electrodes for Label-Free Electrochemical Detection of DNA Hybridization Related to Microcystis spp.

    PubMed Central

    Sengiz, Ceren; Congur, Gulsah; Erdem, Arzum

    2015-01-01

    In this present study, ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (IL)) modified pencil graphite electrode (IL-PGEs) was developed for electrochemical monitoring of DNA hybridization related to Microcystis spp. (MYC). The characterization of IL-PGEs was performed using microscopic and electrochemical techniques. DNA hybridization related to MYC was then explored at the surface of IL-PGEs using differential pulse voltammetry (DPV) technique. After the experimental parameters were optimized, the sequence-selective DNA hybridization related to MYC was performed in the case of hybridization between MYC probe and its complementary DNA target, noncomplementary (NC) or mismatched DNA sequence (MM), or and in the presence of mixture of DNA target: NC (1:1) and DNA target: MM (1:1). PMID:26371004

  1. Electrocatalysis of CO2 Reduction in Brush Polymer Ion Gels.

    PubMed

    McNicholas, Brendon J; Blakemore, James D; Chang, Alice B; Bates, Christopher M; Kramer, Wesley W; Grubbs, Robert H; Gray, Harry B

    2016-09-07

    The electrochemical characterization of brush polymer ion gels containing embedded small-molecule redox-active species is reported. Gels comprising PS-PEO-PS triblock brush polymer, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIm-TFSI), and some combination of ferrocene (Fc), cobaltocenium (CoCp2(+)), and Re(bpy)(CO)3Cl (1) exhibit diffusion-controlled redox processes with diffusion coefficients approximately one-fifth of those observed in neat BMIm-TFSI. Notably, 1 dissolves homogeneously in the interpenetrating matrix domain of the ion gel and displays electrocatalytic CO2 reduction to CO in the gel. The catalytic wave exhibits a positive shift versus Fc(+/0) compared with analogous nonaqueous solvents with a reduction potential 450 mV positive of onset and 90% Faradaic efficiency for CO production. These materials provide a promising and alternative approach to immobilized electrocatalysis, creating numerous opportunities for application in solid-state devices.

  2. Nonaqueous microemulsions based on n,n'-alkylimidazolium alkylsulfate ionic liquids.

    PubMed

    Rojas, Oscar; Tiersch, Brigitte; Rabe, Christian; Stehle, Ralf; Hoell, Armin; Arlt, Bastian; Koetz, Joachim

    2013-06-11

    The ternary system composed of the ionic liquid surfactant (IL-S) 1-butyl-3-methylimidazolium dodecylsulfate ([Bmim][DodSO4]), the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO4]), and toluene has been investigated. Three major mechanisms guiding the structure of the isotropic phase were identified by means of conductometric experiments, which have been correlated to the presence of oil-in-IL, bicontinuous, and IL-in-oil microemulsions. IL-S forms micelles in toluene, which swell by adding RTIL as to be shown by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) experiments. Therefore, it is possible to form water-free IL-in-oil reverse microemulsions ≤10 nm in size as a new type of nanoreactor.

  3. Fabrication of ionic liquid ultrathin film by sequential deposition

    NASA Astrophysics Data System (ADS)

    Morino, Yusuke; Kanai, Yuta; Imanishi, Akihito; Yokota, Yasuyuki; Fukui, Ken-ichi

    2014-01-01

    A simple, mild, reproducible, and controllable nanodeposition method for ionic liquids (ILs) by ejection of IL solution through a high-speed electromagnetic valve (pulse valve) to a substrate under vacuum is proposed (pulse-valve method). Sequential deposition of an IL [1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM-TFSI)] on Au(111) substrates from its methanol solution was examined by adopting the pulse-valve method and the deposited IL films were analyzed by X-ray photoelectron spectroscopy (XPS) and tapping-mode atomic force microscopy (AFM). The amount of IL deposited per a pulse was successfully reduced to less than an equivalent thickness of 0.2 nm. The deposited IL was homogeneously distributed over a substrate area of 1 × 1 cm2 substrate area and the deposited amount was reproducible for independent depositions.

  4. Supported Ionic Liquid Membranes and Ion-Jelly® Membranes with [BMIM][DCA]: Comparison of Its Performance for CO2 Separation

    PubMed Central

    Couto, Ricardo; Neves, Luísa; Simões, Pedro; Coelhoso, Isabel

    2015-01-01

    In this work, a supported ionic liquid membrane (SILM) was prepared by impregnating a PVDF membrane with 1-butyl-3-methylimidazolium dicyanamide ([BMIM][DCA]) ionic liquid. This membrane was tested for its permeability to pure gases (CO2, N2 and O2) and ideal selectivities were calculated. The SILM performance was also compared to that of Ion-Jelly® membranes, a new type of gelled membranes developed recently. It was found that the PVDF membrane presents permeabilities for pure gases similar or lower to those presented by the Ion-Jelly® membranes, but with increased ideal selectivities. This membrane presents also the highest ideal selectivity (73) for the separation of CO2 from N2 when compared with SILMs using the same PVDF support but with different ionic liquids. PMID:25594165

  5. Cryogenic neon matrix-isolation FTIR spectroscopy of evaporated ionic liquids: geometrical structure of cation-anion 1:1 pair in the gas phase.

    PubMed

    Akai, Nobuyuki; Parazs, David; Kawai, Akio; Shibuya, Kazuhiko

    2009-04-09

    Low-temperature infrared spectra of thermally evaporated ionic liquids, 1-ethyl- and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and bis(trifluoromethanesulfonyl)amide have been measured in a cryogenic Ne matrix. The experimental IR spectrum of bis(trifluoromethanesulfonyl)amide can be reproduced theoretically by not B3LYP/6-31G* but MP2/6-31G* calculation, which suggests that the vibrational analysis for ionic liquids composed of bis(trifluoromethanesulfonyl)imide anion would be more successfully performed using the MP2 calculation. By comparison of the matrix-isolation spectra of the ionic liquids with the MP2 calculation, their geometrical structures in the gas phase are determined to be of C(2-position)-H(+)...N(-) interaction structure, which corresponds to the geometry of the energetically second-lowest ion-pair structure. The present study may provide a valuable clue to understand a vaporization mechanism of ionic liquid.

  6. Surface segregation in binary mixtures of imidazolium-based ionic liquids

    NASA Astrophysics Data System (ADS)

    Souda, Ryutaro

    2010-09-01

    Surface composition of binary mixtures of room-temperature ionic liquids has been investigated using time-of-flight secondary ion mass spectrometry at room temperature over a wide composition range. The imidazolium cations with longer aliphatic groups tend to segregate to the surface, and a bis(trifluoromethanesulfonyl)imide anion (Tf 2N -) is enriched at the surface relative to hexafluorophosphate (PF 6-). The surface of an equimolar mixture of Li[Tf 2N] and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF 6]) has a nominal composition of [bmim][Tf 2N] because of surface segregation and ligand exchange. The surface segregation of cations and anions is likely to result from alignment of specific ligand-exchanged molecules at the topmost surface layer to exclude more hydrophobic part of the molecules.

  7. Optimization of covalent immobilization of Trichoderma reesei cellulase onto modified ReliZyme HA403 and Sepabeads EC-EP supports for cellulose hydrolysis, in buffer and ionic liquids/buffer media.

    PubMed

    Bilgin, Ramazan; Yalcin, M Serkan; Yildirim, Deniz

    2016-08-01

    The covalent immobilization of Trichoderma reesei cellulase onto modified ReliZyme HA403 and Sepabeads EC-EP supports were carried out. The optimal immobilization conditions were determined using response surface methodology. The hydrolysis of cellulose using the free and immobilized cellulase preparations in ionic liquids (IL) using cosolvents was investigated. The hydrolytic activities in buffer medium containing 25% (v/v) of 1-butyl-3-methylimidazolium hexafluorophosphate were around 2.6-, 1.6-, and 5.5-fold higher than the activities in buffer medium. The retained initial activities were 32% and 57%, respectively for cellulase preparations immobilized onto Sepabeads EC-EP support and onto modified ReliZyme HA403 support after 5 reuses.

  8. Enzymatic membrane reactor for full saccharification of ionic liquid-pretreated microcrystalline cellulose.

    PubMed

    Lozano, Pedro; Bernal, Berenice; Jara, Antonio G; Belleville, Marie-Pierre

    2014-01-01

    Ultrafiltration reactors based on polymeric or ceramic membranes were shown to be suitable catalytic systems for fast enzymatic saccharification of cellulose, allowing the full recovery and reuse of enzymes. By pre-treating cellulose with the IL 1-butyl-3-methylimidazolium chloride, the suitability of this substrate for enzymatic saccharification in a reactor based on polymeric ultrafiltration membranes was demonstrated, leading to 95% cellulose hydrolysis in 4h at 50°C. The filtration process gave a clear glucose solution (up to 113 mM) at constant permeate flow (24.7 L h(-1) m(-2)), allowing the enzyme to be reused for 9 operation cycles under semi-continuous operation, without any loss of enzyme activity. Under continuous operation mode and using ceramic ultrafiltration membranes at different residence times, the enzymatic reactor showed constant profiles in both the permeate flow rate and the glucose concentration, demonstrating the excellent suitability of the proposed approach for the saccharification of cellulose.

  9. Supported Ionic Liquid Membranes and Ion-Jelly® Membranes with [BMIM][DCA]: Comparison of Its Performance for CO2 Separation.

    PubMed

    Couto, Ricardo; Neves, Luísa; Simões, Pedro; Coelhoso, Isabel

    2015-01-14

    In this work, a supported ionic liquid membrane (SILM) was prepared by impregnating a PVDF membrane with 1-butyl-3-methylimidazolium dicyanamide ([BMIM][DCA]) ionic liquid. This membrane was tested for its permeability to pure gases (CO2, N2 and O2) and ideal selectivities were calculated. The SILM performance was also compared to that of Ion-Jelly® membranes, a new type of gelled membranes developed recently. It was found that the PVDF membrane presents permeabilities for pure gases similar or lower to those presented by the Ion-Jelly® membranes, but with increased ideal selectivities. This membrane presents also the highest ideal selectivity (73) for the separation of CO2 from N2 when compared with SILMs using the same PVDF support but with different ionic liquids.

  10. Solute-solvent interactions in imidazolium camphorsulfonate ionic liquids.

    PubMed

    Nobuoka, Kaoru; Kitaoka, Satoshi; Iio, Masashi; Harran, Thomas; Ishikawa, Yuichi

    2007-11-28

    We directly observe the interaction between 1-butyl-3-methylimidazolium (bmim) or 1-butyl-2,3-dimethylimidazolium (bm(2)im) and the solute, ethyl acrylate (EA), which is the popular dienophile in the Diels-Alder reaction and an H-bonding acceptor, by using specially designed electrospray mass spectrometry. In imidazolium ionic liquids, cation-anion interactions are controlled by selecting the appropriate anion, and the naked C(2)-H of imidazolium, which loosely interacts with its counterion, can readily interact with an H-bonding acceptable solute. The ion-counterion (solvent-solvent) interaction affects the ion-solute (solvent-solute) interaction. This relation is one of the key criteria for selecting the cation-anion combination in tailoring ILs.

  11. The Effect of Microporous Polymeric Support Modification on Surface and Gas Transport Properties of Supported Ionic Liquid Membranes

    PubMed Central

    Akhmetshina, Alsu A.; Davletbaeva, Ilsiya M.; Grebenschikova, Ekaterina S.; Sazanova, Tatyana S.; Petukhov, Anton N.; Atlaskin, Artem A.; Razov, Evgeny N.; Zaripov, Ilnaz I.; Martins, Carla F.; Neves, Luísa A.; Vorotyntsev, Ilya V.

    2015-01-01

    Microporous polymers based on anionic macroinitiator and toluene 2,4-diisocyanate were used as a support for 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf2N]) immobilization. The polymeric support was modified by using silica particles associated in oligomeric media, and the influence of the modifier used on the polymeric structure was studied. The supported ionic liquid membranes (SILMs) were tested for He, N2, NH3, H2S, and CO2 gas separation and ideal selectivities were calculated. The high values of ideal selectivity for ammonia-based systems with permanent gases were observed on polymer matrixes immobilized with [bmim][PF6] and [emim][Tf2N]. The modification of SILMs by nanosize silica particles leads to an increase of NH3 separation relatively to CO2 or H2S. PMID:26729177

  12. Rapid Carbonation for Calcite from a Solid-Liquid-Gas System with an Imidazolium-Based Ionic Liquid

    PubMed Central

    Ibrahim, Abdul-Rauf; Vuningoma, Jean Bosco; Huang, Yan; Wang, Hongtao; Li, Jun

    2014-01-01

    Aqueous carbonation of Ca(OH)2 is a complex process that produces calcite with scalenohedral calcite phases and characterized by inadequate carbonate species for effective carbonation due to the poor dissolution of CO2 in water. Consequently, we report a solid-liquid-gas carbonation system with an ionic liquid (IL), 1-butyl-3-methylimidazolium bromide, in view of enhancing the reaction of CO2 with Ca(OH)2. The use of the IL increased the solubility of CO2 in the aqueous environment and enhanced the transport of the reactive species (Ca2+ and CO32−) and products. The presence of the IL also avoided the formation of the CaCO3 protective and passivation layer and ensured high carbonation yields, as well as the production of stoichiometric rhombohedral calcite phases in a short time. PMID:24968273

  13. Interfacial interactions in aprotic ionic liquid based protonic membrane and its correlation with high temperature conductivity and thermal properties.

    PubMed

    Mistry, Mayur K; Subianto, Surya; Choudhury, Namita Roy; Dutta, Naba K

    2009-08-18

    Novel supported liquid membranes (SLMs) have been developed by impregnating Nafion and Hyflon membranes with ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-BTSI). These supported liquid membranes were characterized in terms of their ionic liquid uptake behavior, leaching of ionic liquid by water, thermal stability, mechanical properties, glass transition temperature, ion exchange capacity, and proton conductivity. In general, modified membranes are more flexible than unmodified samples due to the plasticization effects of the ionic liquid. However, these supported liquid membranes exhibit a significant increase in their operational stability and proton conductivity over unmodified membranes. We also demonstrate that proton conductivity of these supported liquid membranes allows conduction of protons in anhydrous conditions with conductivity increasing with temperature. Conductivity of up to 3.58 mS cm(-1) has been achieved at 160 degrees C in dry conditions, making these materials promising for various electrochemical applications.

  14. Recovery of ionic liquid via a hybrid methodology of electrodialysis with ultrafiltration after biomass pretreatment.

    PubMed

    Liang, Xiaocong; Fu, Yan; Chang, Jie

    2016-11-01

    Hybrid membrane-based methodology of electrodialysis (ED) with ultrafiltration (UF) was employed to recover the IL BmimBr (1-Butyl-3-methylimidazolium bromide) after biomass fractionation. Ultrafiltration was used to remove the residual lignin in IL solutions. Influence of molecular weight interception of UF treatment, initial IL concentration in dilute section, applied voltage and flow rate in each section of ED module were studied in detail. In this study, the highest overall IL recovery ratio reached 75.2% and the current efficiency of ED process approached 79.1%. Besides, the highest IL recovery performance of specific energy consumption was about 514.1g/kw·h. Insight gained from this study suggests a potential methodology for IL recovery after the pretreatment process for biomass.

  15. Temperature effects on the capacitance of an imidazolium-based ionic liquid on a graphite electrode: a molecular dynamics simulation.

    PubMed

    Liu, Xiaohong; Han, Yining; Yan, Tianying

    2014-08-25

    Temperature-dependent electric double layer (EDL) and differential capacitance-potential (C(d)-U) curves of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM(+)/PF6(-)) were studied on a graphite electrode by molecular dynamics simulations. It was found that all C(d)-U curves were asymmetric camel-shaped with higher C(d) at negative polarization, attributed to the specific adsorption of BMIM(+). In addition, the maxima of Cd at the negative polarization decrease monotonically with temperature due to the thicker EDL, whereas at the positive polarization they gradually increase from 450 to 550 K and decrease at 600 K. Such temperature effects at positive polarization may be understood in terms of the competition between two aspects: the weakening specific adsorption of BMIM(+) allows more effective screening to the positive charge and overall increasing EDL thickness. Although the former dominates from 450 to 550 K, the latter becomes dominant at 600 K.

  16. Ionic liquids as novel solvents for biosynthesis of octenyl succinic anhydride-modified waxy maize starch.

    PubMed

    Li, Dandan; Zhang, Xiwen; Tian, Yaoqi

    2016-05-01

    Biosynthesis of octenyl succinic anhydride (OSA) starch was investigated using ionic liquids (ILs) as reaction media. Waxy maize starch was pretreated in 1-butyl-3-methylimidazolium chlorine and then esterified with OSA in 1-octyl-3-methylimidazolium nitrate by using Novozyme 435 as catalyst. The degree of substitution of OSA starch reached 0.0130 with 5 wt% starch concentration and 1 wt% lipase dosage based on ILs weight at 50 °C for 3h. The formation of OSA starch was confirmed by fourier transform infrared spectroscopy. Scanning electron microscopy and X-ray diffraction revealed that the morphology and crystal structure of starch were significantly destroyed. Thermogravimetric analysis showed that esterification decreased the thermal stability of starch. The successful lipase-catalyzed synthesis of OSA starch in ILs suggests that ILs are potential replacement of traditional organic solvents for starch ester biosynthesis.

  17. Separation of lignin from corn stover hydrolysate with quantitative recovery of ionic liquid

    DOE PAGES

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; ...

    2015-02-20

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent biorenewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. In this paper, we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. Finally, themore » isolated lignin is not only free from ionic liquid but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals.« less

  18. The first molecular level monitoring of carbohydrate conversion to 5-hydroxymethylfurfural in ionic liquids. B2O3--an efficient dual-function metal-free promoter for environmentally benign applications.

    PubMed

    Khokhlova, Elena A; Kachala, Vadim V; Ananikov, Valentine P

    2012-04-01

    The mechanistic nature of the conversion of carbohydrates to the sustainable platform chemical 5-hydroxymethylfurfural (5-HMF) was revealed at the molecular level. A detailed study of the key sugar units involved in the biomass conversion process has shown that the simple dissolution of fructose in the ionic liquid 1-butyl-3-methylimidazolium chloride significantly changes the anomeric composition and favors the formation of the open fructoketose form. A special NMR approach was developed for the determination of molecular structures and monitoring of chemical reactions directly in ionic liquids. The transformation of glucose to 5-HMF has been followed in situ through the detection of intermediate species. A new environmentally benign, easily available, metal-free promoter with a dual functionality (B(2)O(3)) was developed for carbohydrate conversion to 5-HMF.

  19. Impact of regeneration process on the crystalline structure and enzymatic hydrolysis of cellulose obtained from ionic liquid.

    PubMed

    Cao, Xuefei; Peng, Xinwen; Sun, Shaoni; Zhong, Linxin; Wang, Sha; Lu, Fachuang; Sun, Runcang

    2014-10-13

    The present study investigated the impact of regeneration process on the crystalline structure and enzymatic hydrolysis behaviors of microcrystalline cellulose (MCC) regenerated from ionic liquid 1-butyl-3-methylimidazolium chloride. The crystalline structures of these regenerated samples were analyzed by X-ray diffraction. Results suggested that almost amorphous cellulose was obtained by regenerating MCC in acetone (DRC-a), while partial cellulose II structure could be found in these regenerated samples from water and ethanol. Additionally, the enzymatic hydrolysis behaviors of MCC and its regenerated samples were comparatively studied. Results showed that above 90% of cellulose could be converted into glucose within 4h for DRC-a and regenerated cellulose without drying (WRC-w) as compared to that of MCC (9.7%). Therefore, the regeneration process could significantly influence the crystallinity and digestibility of cellulose.

  20. Encapsulated Ionic Liquids for CO2 Capture: Using 1-Butyl-methylimidazolium Acetate for Quick and Reversible CO2 Chemical Absorption.

    PubMed

    Moya, Cristian; Alonso-Morales, Noelia; Gilarranz, Miguel A; Rodriguez, Juan J; Palomar, Jose

    2016-12-05

    The potential advantages of applying encapsulated ionic liquid (ENIL) to CO2 capture by chemical absorption with 1-butyl-3-methylimidazolium acetate [bmim][acetate] are evaluated. The [bmim][acetate]-ENIL is a particle material with solid appearance and 70 % w/w in ionic liquid (IL). The performance of this material as CO2 sorbent was evaluated by gravimetric and fixed-bed sorption experiments at different temperatures and CO2 partial pressures. ENIL maintains the favourable thermodynamic properties of the neat IL regarding CO2 absorption. Remarkably, a drastic increase of CO2 sorption rates was achieved using ENIL, related to much higher contact area after discretization. In addition, experiments demonstrate reversibility of the chemical reaction and the efficient ENIL regeneration, mainly hindered by the unfavourable transport properties. The common drawback of ILs as CO2 chemical absorbents (low absorption rate and difficulties in solvent regeneration) are overcome by using ENIL systems.

  1. Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production.

    PubMed

    Wahidin, Suzana; Idris, Ani; Shaleh, Sitti Raehanah Muhamad

    2016-04-01

    The wet biomass microalgae of Nannochloropsis sp. was converted to biodiesel using direct transesterification (DT) by microwave technique and ionic liquid (IL) as the green solvent. Three different ionic liquids; 1-butyl-3-metyhlimidazolium chloride ([BMIM][Cl], 1-ethyl-3-methylimmidazolium methyl sulphate [EMIM][MeSO4] and 1-butyl-3-methylimidazolium trifluoromethane sulfonate [BMIM][CF3SO3]) and organic solvents (hexane and methanol) were used as co-solvents under microwave irradiation and their performances in terms of percentage disruption, cell walls ruptured and biodiesel yields were compared at different reaction times (5, 10 and 15 min). [EMIM][MeSO4] showed highest percentage cell disruption (99.73%) and biodiesel yield (36.79% per dried biomass) after 15 min of simultaneous reaction. The results demonstrated that simultaneous extraction-transesterification using ILs and microwave irradiation is a potential alternative method for biodiesel production.

  2. Theoretical investigation of polarization effects in solution: Importance of solvent collective motions

    SciTech Connect

    Ishida, Tateki

    2015-01-22

    Recent theoretical studies on interesting topics related to polarization effects in solutions are presented. As one of interesting topics, ionic liquids (ILs) solvents are focused on. The collective dynamics of electronic polarizability through interionic dynamics and the effect of polarization in ILs, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF{sub 6}]), are studied with molecular dynamics simulation. Also, the time-dependent polarization effect on the probe betaine dye molecule, pyridinium N-phenoxide, in water is investigated by a time-dependent reference interaction site model self-consistent field (time-dependent RISM-SCF) approach. The importance of considering polarization effects on solution systems related to solvent collective motions is shown.

  3. Radiation stability of some room temperature ionic liquids

    NASA Astrophysics Data System (ADS)

    Jagadeeswara Rao, Ch.; Venkatesan, K. A.; Tata, B. V. R.; Nagarajan, K.; Srinivasan, T. G.; Vasudeva Rao, P. R.

    2011-05-01

    Radiation stability of some room temperature ionic liquids (RTILs) that find useful electrochemical applications in nuclear fuel cycle has been evaluated. The ionic liquids such as protonated betaine bis(trifluoromethylsulfonyl)imide (HbetNTf 2), aliquat 336 (tri-n-octlymethylammonium chloride), 1-butyl-3-methylimidazolium chloride (bmimCl), 1-hexyl-3-methylimidazolium chloride (hmimCl), N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BMPyNTf 2) and N-methyl-N-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPiNTf 2) have been irradiated to various absorbed dose levels, up to 700 kGy. The effect of gamma radiation on these ionic liquids has been evaluated by determining the variations in the physical properties such as color, density, viscosity, refractive index and electrochemical window. The changes in density, viscosity and refractive index of these ionic liquids upon irradiation were insignificant; however, the color and electrochemical window varied significantly with increase of absorbed dose.

  4. Theoretical investigation of polarization effects in solution: Importance of solvent collective motions

    NASA Astrophysics Data System (ADS)

    Ishida, Tateki

    2015-01-01

    Recent theoretical studies on interesting topics related to polarization effects in solutions are presented. As one of interesting topics, ionic liquids (ILs) solvents are focused on. The collective dynamics of electronic polarizability through interionic dynamics and the effect of polarization in ILs, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF6]), are studied with molecular dynamics simulation. Also, the time-dependent polarization effect on the probe betaine dye molecule, pyridinium N-phenoxide, in water is investigated by a time-dependent reference interaction site model self-consistent field (time-dependent RISM-SCF) approach. The importance of considering polarization effects on solution systems related to solvent collective motions is shown.

  5. Synthesis of Asymmetrical Organic Carbonates using CO2 as a Feedstock in AgCl/Ionic Liquid System at Ambient Conditions.

    PubMed

    Hu, Jiayin; Ma, Jun; Lu, Lu; Qian, Qingli; Zhang, Zhaofu; Xie, Chao; Han, Buxing

    2017-03-22

    Synthesis of asymmetrical organic carbonates from the renewable and inexpensive CO2 is of great importance but also challenging, especially at ambient conditions. Herein, we found that some metal salt/ionic liquid catalyst systems were highly active for the synthesis of asymmetrical organic carbonates from CO2 , propargylic alcohols, and primary alcohols. Especially, the AgCl/1-butyl-3-methylimidazolium acetate ([Bmim][OAc]) system was very efficient for the reactions of a wide range of substrates at room temperature and atmospheric pressure, and the yields of the asymmetrical organic carbonates could approach 100 %. The catalyst system could be reused at least five times without changing its catalytic performance, and could be easily recovered and reused. A detailed study indicated that AgCl and [Bmim][OAc] catalyzed the reactions cooperatively, resulting in unique catalytic performance.

  6. Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid.

    PubMed

    Sidik, Dilaeleyana Abu Bakar; Ngadi, Norzita; Amin, Nor Aishah Saidina

    2013-05-01

    The production of lignin from empty fruit bunch (EFB) has been carried out using liquefaction method with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) ionic liquid (IL), in presence of sulfuric acid (H2SO4) as a catalyst. Response surface methodology (RSM) based on a factorial Central Composite Design (CCD) was employed to identify the optimum condition for lignin yield. The result indicated that the second order model was adequate for all the independent variables on the response with R(2)=0.8609. The optimum temperature, time, ionic liquid to EFB ratio, and catalyst concentration were 150.5 °C, 151 min, 3:1 wt/wt and 4.73 wt%, respectively for lignin yield=26.6%. The presence of lignin liquefied product was confirmed by UV-Vis and FTIR analysis. It was also demonstrated lignin extraction from lignocellulosic using recycled IL gave sufficient performance.

  7. Plasticizing effect of ionic liquid on cellulose acetate obtained by melt processing.

    PubMed

    Bendaoud, Amine; Chalamet, Yvan

    2014-08-08

    Cellulose acetate (CA) plasticized by 1-butyl-3-methylimidazolium chloride (BMIMCl) and with diethylphtalate (DEP) was obtained by melt processing at 150°C. The effect and the interaction of ionic liquid with the cellulose acetate and their influence on structural, thermo-mechanical, rheological and tensile properties of CA materials were investigated. Ionic liquid (BMIMCl) has shown a good plasticization and more efficient destruction of the crystalline structure of cellulose acetate than the DEP plasticized CA. BMIMCl interacts intensively with CA molecules due to the pronounced van der Waals interactions, hydrogen bonding and electrostatic nature of ionic liquid. The tensile test and the low Young's modulus for plasticized CA suggest a strong reduction of the interaction between the CA chains due to the presence of the ionic liquid.

  8. Sensitive determination of Amaranth in drinks by highly dispersed CNT in graphene oxide "water" with the aid of small amounts of ionic liquid.

    PubMed

    Wang, Meiling; Sun, Yinlu; Yang, Xiongbo; Zhao, Jianwei

    2015-07-15

    Graphene oxide (GO) is a pH-dependent amphiphile. In this paper, it was found that carbon nanotubes (CNTs) can be highly dispersed in graphene oxide "water" with the aid of prototype ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]). The introduction of [BMIM][PF6] not only can minimize the defects of poor electrical conductivity of GO, but also can improve the dispersibility of CNT in water. Hence, a new composite of CNT/GO-[BMIM][PF6] with high dispersibility and strong conductivity was presented for the first time and employed in the sensitive determination of Amaranth in soft drinks. The detection limit achieved (0.1 nM) is much lower than the guideline values in soft drinks. The ease of preparation, low background current, high sensitivity and stability can create novel avenues and applications for fabricating robust sensors for determination of other azo dyes in foods.

  9. Understanding changes in cellulose crystalline structure of lignocellulosic biomass during ionic liquid pretreatment by XRD.

    PubMed

    Zhang, Jiafu; Wang, Yixun; Zhang, Liye; Zhang, Ruihong; Liu, Guangqing; Cheng, Gang

    2014-01-01

    X-ray diffraction (XRD) was used to understand the interactions of cellulose in lignocellulosic biomass with ionic liquids (ILs). The experiment was designed in such a way that the process of swelling and solubilization of crystalline cellulose in plant cell walls was followed by XRD. Three different feedstocks, switchgrass, corn stover and rice husk, were pretreated using 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) at temperatures of 50-130°C for 6h. At a 5 wt.% biomass loading, increasing pretreatment temperature led to a drop in biomass crystallinity index (CrI), which was due to swelling of crystalline cellulose. After most of the crystalline cellulose was swollen with IL molecules, a low-order structure was found in the pretreated samples. Upon further increasing temperature, cellulose II structure started to form in the pretreated biomass samples as a result of solubilization of cellulose in [C4mim][OAc] and subsequent regeneration.

  10. Separation of Lignin from Corn Stover Hydrolysate with Quantitative Recovery of Ionic Liquid

    PubMed Central

    Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

    2015-01-01

    Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent bio-renewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. Here we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. The isolated lignin is not only free from ionic liquid, but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals. PMID:25866701

  11. The Effect of Microporous Polymeric Support Modification on Surface and Gas Transport Properties of Supported Ionic Liquid Membranes.

    PubMed

    Akhmetshina, Alsu A; Davletbaeva, Ilsiya M; Grebenschikova, Ekaterina S; Sazanova, Tatyana S; Petukhov, Anton N; Atlaskin, Artem A; Razov, Evgeny N; Zaripov, Ilnaz I; Martins, Carla F; Neves, Luísa A; Vorotyntsev, Ilya V

    2015-12-30

    Microporous polymers based on anionic macroinitiator and toluene 2,4-diisocyanate were used as a support for 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]) immobilization. The polymeric support was modified by using silica particles associated in oligomeric media, and the influence of the modifier used on the polymeric structure was studied. The supported ionic liquid membranes (SILMs) were tested for He, N₂, NH₃, H₂S, and CO₂ gas separation and ideal selectivities were calculated. The high values of ideal selectivity for ammonia-based systems with permanent gases were observed on polymer matrixes immobilized with [bmim][PF₆] and [emim][Tf₂N]. The modification of SILMs by nanosize silica particles leads to an increase of NH₃ separation relatively to CO₂ or H₂S.

  12. Ultrasound-assisted ionic liquid-based dispersive liquid-liquid microextraction for preconcentration of patent blue V and its determination in food samples by UV-visible spectrophotometry.

    PubMed

    Unsal, Yunus Emre; Soylak, Mustafa; Tuzen, Mustafa

    2015-04-01

    Ultrasound-assisted ionic liquid-based dispersive liquid-liquid microextraction procedure (UA-IL-DLLME) was developed for determination of trace levels of patent blue V prior to its determination by UV-visible spectrophotometry. Patent blue V was extracted from 25-mL sample into a 100-μL volume of ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), with the aid of sonication in an ultrasonic bath. Several variables affecting microextraction efficiency were optimized. Under the optimum experimental conditions, the detection limit (3 s) was 0.68 μg L(-1), and the preconcentration factor was 100. The relative standard deviation for six replicate determinations of patent blue V was 4.5%. The method was applied to the determination of patent blue V in food samples. The proposed procedure is effective, very simple, and fast.

  13. Advanced two-photon photolithography for patterning of transparent, electrically conductive ionic liquid-polymer nanostructures

    NASA Astrophysics Data System (ADS)

    Bakhtina, Natalia A.; MacKinnon, Neil; Korvink, Jan G.

    2016-04-01

    A key challenge in micro- and nanotechnology is the direct patterning of functional structures. For example, it is highly desirable to possess the ability to create three-dimensional (3D), conductive, and optically transparent structures. Efforts in this direction have, to date, yielded less than optimal results since the polymer composites had low optical transparency over the visible range, were only slightly conductive, or incompatible with high resolution structuring. We have previously presented the novel cross-linkable, conductive, highly transparent composite material based on a photoresist (IP-L 780, OrmoComp, or SU-8) and the ionic liquid 1-butyl-3-methylimidazolium dicyanamide. Material patterning by conventional and two-photon photolithography has been demonstrated as proof-of-concept. Aiming to increase the resolution and to extend the spectrum of exciting applications we continued our research into identifying new ionic liquid - polymer composites. In this paper, we report the precise 3D single-step structuring of optically transparent and electrically conductive ionic liquid - polymer nanostructures with the highest spatial resolution (down to 150 nm) achieved to date. This was achieved via the development of novel cross-linkable composite based on the photoresist IP-G 780 and the ionic liquid 1-butyl-3-methylimidazolium dicyanamide. The successful combination of the developed material with the advanced direct laser writing technique enabled the time- and cost-saving direct manufacturing of transparent, electrically conductive components. We believe that the excellent characteristics of the structured material will open a wider range of exciting applications.

  14. Effects of ionic liquid and nanogold particles on high-performance liquid chromatography-electrochemical detection and their application in highly efficient separation and sensitive analysis of five phenolic acids in Xuebijing injection.

    PubMed

    Jia, Pu; Wang, Shixiang; Meng, Xue; Lan, Wei; Luo, Jing; Liao, Sha; Xiao, Chaoni; Zheng, Xiaopu; Li, Lianshe; Liu, Qinshe; Zheng, Jianbin; Zhou, Yuanzhen; Zheng, Xiaohui

    2013-03-30

    A novel high performance liquid chromatography-electrochemical detector (HPLC-ECD) analytical system was developed in this study by integratedly utilizing ionic liquid (IL) of 1-butyl-3-methylimidazolium bromide and an additive of gold nanoparticles. The resulted pilot study was first performed to assess the effects of 1-butyl-3-methylimidazolium bromide and gold nanoparticles on the chromatographic characteristics of five phenolic acids in Xuebijing injection, including danshensu (DSS), protocatechuic acid (PA), protocatechuic aldehyde (PAH), hydroxy safflower yellow A (HSYA) and ferulic acid (FA). It was notable to observe that retainability of the phenolic acids were markly lowered by IL addition. Compared with the cases without IL addition, the retention times of DSS, PA, PAH, HSYA and FA have decreased 2.851, 1.532, 1.53, 0.818 and 0.552 min, respectively when 0.6% IL in the mobile phase. In addition, the corresponding theoretical plate numbers and peak areas for these compounds were significantly increased. Area response for DSS, PA, PAH, HSYA and FA were enhanced by 772%, 628%, 584%, 703% and 600%, respectively. It was observed that nano-gold catalysis power enabled peak areas of DSS, PAH, FA and PA to enhance 5.7, 6.2, 8.5 and 66.5 times relative to the case with addition of IL. Altogether, the optimized HPLC-ECD system was successfully applied to the pharmacokinetics study of Xuebijing injection with underlying applicability to in vivo and in vitro analysis of a variety of natural product from Chinese medicine plants, TCM formulae and associated patent TCM preparation.

  15. The Importance of Ion Size and Electrode Curvature on Electrical Double Layers in Ionic Liquids

    SciTech Connect

    Feng, Guang; Qiao, Rui; Huang, Jingsong; Dai, Sheng; Sumpter, Bobby G; Meunier, Vincent

    2010-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF(6)] (near the positive electrode) {approx} [BMIM][Cl] (near the negative electrode) {approx} [BMIM][PF(6)] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a 'Multiple Ion Layers with Overscreening' (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  16. The importance of ion size and electrode curvature on electrical double layers in ionic liquids

    SciTech Connect

    Feng, G.; Qiao, R.; Huang, J; Dai, S.; Sumpter, B. G.; Meunier, V.

    2011-01-01

    Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF{sub 6}], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF{sub 6}] (near the positive electrode) ≈ [BMIM][Cl] (near the negative electrode) ≈ [BMIM][PF{sub 6}] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a “Multiple Ion Layers with Overscreening” (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.

  17. Selective extraction of emerging contaminants from water samples by dispersive liquid-liquid microextraction using functionalized ionic liquids.

    PubMed

    Yao, Cong; Li, Tianhao; Twu, Pamela; Pitner, William R; Anderson, Jared L

    2011-03-25

    Functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion were used as extraction solvents in dispersive liquid-liquid microextraction (DLLME) for the extraction of 14 emerging contaminants from water samples. The extraction efficiencies and selectivities were compared to those of an in situ IL DLLME method which uses an in situ metathesis reaction to exchange 1-butyl-3-methylimidazolium chloride (BMIM-Cl) to 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf(2)). Compounds containing tertiary amine functionality were extracted with high selectivity and sensitivity by the 1-(6-amino-hexyl)-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (HNH(2)MPL-FAP) IL compared to other FAP-based ILs and the BMIM-NTf(2) IL. On the other hand, polar or acidic compounds without amine groups exhibited higher enrichment factors using the BMIM-NTf(2) IL. The detection limits for the studied analytes varied from 0.1 to 55.1 μg/L using the traditional IL DLLME method with the HNH(2)MPL-FAP IL as extraction solvent, and from 0.1 to 55.8 μg/L using in situ IL DLLME method with BMIM-Cl+LiNTf(2) as extraction solvent. A 93-fold decrease in the detection limit of caffeine was observed when using the HNH(2)MPL-FAP IL compared to that obtained using in situ IL DLLME method. Real water samples including tap water and creek water were analyzed with both IL DLLME methods and yielded recoveries ranging from 91% to 110%.

  18. Monitoring the Rate Solvolytic Decomposition of Benzenediazonium Tetrafluoroborate in Aqueous Media Using a pH Electrode

    ERIC Educational Resources Information Center

    Wiseman, Floyd L.

    2005-01-01

    A lab rotary experiment using the pH measurements of an aqueous solution to monitor the course of a solvolytic reaction was conducted. This experiment allowed the students to gain experience in taking precise pH measurement, to use nonlinear analysis techniques for analyzing kinetic data and to use the Arrhenius equation for determination of…

  19. The electrochemical reduction of the purines guanine and adenine at platinum electrodes in several room temperature ionic liquids.

    PubMed

    Zanoni, Maria Valnice Boldrin; Rogers, Emma I; Hardacre, Christopher; Compton, Richard G

    2010-02-05

    The reduction of guanine was studied by microelectrode voltammetry in the room temperature ionic liquids (RTILs) N-hexyltriethylammonium bis (trifluoromethanesulfonyl) imide [N(6,2,2,2)][N(Tf)(2)], 1-butyl-3-methylimidazolium hexafluorosphosphate [C(4)mim][PF(6)], N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide [C(4)mpyrr][N(Tf)(2)], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C(4)mim][N(Tf)(2)], N-butyl-N-methyl-pyrrolidinium dicyanamide [C(4)mpyrr][N(NC)(2)] and tris(P-hexyl)-tetradecylphosphonium trifluorotris(pentafluoroethyl)phosphate [P(14,6,6,6)][FAP] on a platinum microelectrode. In [N(6,2,2,2)][NTf(2)] and [P(14,6,6,6)][FAP], but not in the other ionic liquids studied, guanine reduction involves a one-electron, diffusion-controlled process at very negative potential to produce an unstable radical anion, which is thought to undergo a dimerization reaction, probably after proton abstraction from the cation of the ionic liquid. The rate of this subsequent reaction depends on the nature of the ionic liquid, and it is faster in the ionic liquid [P(14,6,6,6)][FAP], in which the formation of the resulting dimer can be voltammetrically monitored at less negative potentials than required for the reduction of the parent molecule. Adenine showed similar behaviour to guanine but the pyrimidines thymine and cytosine did not; thymine was not reduced at potentials less negative than required for solvent (RTIL) decomposition while only a poorly defined wave was seen for cytosine. The possibility for proton abstraction from the cation in [N(6,2,2,2)][NTf(2)] and [P(14,6,6,6)][FAP] is noted and this is thought to aid the electrochemical dimerization process. The resulting rapid reaction is thought to shift the reduction potentials for guanine and adenine to lower values than observed in RTILs where the scope for proton abstraction is not present. Such shifts are characteristic of so-called EC processes where reversible electron transfer

  20. Radiation effects on hydrophobic ionic liquid [C4mim][NTf2] during extraction of strontium ions.

    PubMed

    Yuan, Liyong; Peng, Jing; Xu, Ling; Zhai, Maolin; Li, Jiuqiang; Wei, Genshuan

    2009-07-02

    The applications of room-temperature ionic liquids (RTILs) in separation of high level radioactive nuclides demand a comprehensive knowledge of the stability and metal ion extraction of RTILs under radiation. Herein, we assessed the influence of gamma-irradiation on the [C(4)mim][NTf(2)]-based extraction system, where [C(4)mim](+) is 1-butyl-3-methylimidazolium and [NTf(2)](-) is bis(trifluoromethylsulfonyl)imide, by solvent extraction of Sr(2+) using irradiated [C(4)mim][NTf(2)] in combination with dicyclohexyl-18-crown-6 (DCH18C6). It was found that the degree of extraction for Sr(2+) from water to irradiated [C(4)mim][NTf(2)] decreased compared with that to unirradiated [C(4)mim][NTf(2)], and the decrement enhanced obviously with increasing dose. NMR spectroscopic probe analysis revealed the formation of acids during irradiation of [C(4)mim][NTf(2)]. The decrease of Sr(2+) partitioning in irradiated [C(4)mim][NTf(2)] is attributed to the competition between H(+) with Sr(2+) to interact with DCH18C6. Accordingly, washing irradiated [C(4)mim][NTf(2)] with water gives a simple way of ionic liquid recycling. Furthermore, the degree of extraction for Sr(2+) from 3 mol.L(-1) nitric acid solution to [C(4)mim][NTf(2)] is independent of the irradiation of [C(4)mim][NTf(2)] since the amount of the radiation-generated H(+) is negligible in such a high acidic solution.

  1. Low-temperature heat capacities of 1-alkyl-3-methylimidazolium bis(oxalato)borate ionic liquids and the influence of anion structural characteristics on thermodynamic properties.

    PubMed

    Yang, Miao; Zhao, Jun-Ning; Liu, Qing-Shan; Sun, Li-Xian; Yan, Pei-Fang; Tan, Zhi-Cheng; Welz-Biermann, Urs

    2011-01-07

    Two chelated orthoborate ionic liquids (ILs), 1-butyl-3-methylimidazolium bis(oxalato)borate ([Bmim][BOB]) and 1-hexyl-3-methylimidazolium bis(oxalato)borate ([Hmim][BOB]), were prepared and characterized. Their thermodynamic properties were studied using adiabatic calorimetry and differential scanning calorimetry (DSC). The thermodynamic properties of the two ILs were evaluated and compared with each other, and then with those of other [Bmim] type ILs. The results clearly indicate that for a given cation (or anion) and at a certain temperature, the more atoms in the anion (or cation), the higher the heat capacity; the higher glass-transition temperatures of [BOB] type ILs than others are mainly caused by the higher symmetry of the orthoborate anion structure. It is suggested that a high content of strong electronegative atoms and C(n) or C(nv) (n = 1,2,3,…,∞) point group symmetry in the anion are favorable for the design and synthesis of room temperature ILs with a wide liquid range.

  2. Phase Transitions of Triflate-Based Ionic Liquids under High Pressure.

    PubMed

    Faria, Luiz F O; Ribeiro, Mauro C C

    2015-11-05

    Raman spectroscopy has been used to study phase transitions of ionic liquids based on the triflate anion, [TfO](-), as a function of pressure or temperature. Raman spectra of ionic liquids containing the cations 1-butyl-3-methylimidazolium, [C4C1Im](+), 1-octyl-3-methylimidazolium, [C8C1Im](+), 1-butyl-2,3-dimethylimidazolium, [C4C1C1Im](+), and 1-butyl-1-methylpyrrolidinium, [C4C1Pyr](+), were compared. Vibrational frequencies and binding energy of ionic pairs were calculated by quantum chemistry methods. The ionic liquids [C4C1Im][TfO] and [C4C1Pyr][TfO] crystallize at 1.0 GPa when the pressure is increased in steps of ∼ 0.2 GPa from the atmospheric pressure, whereas [C8C1Im][TfO] and [C4C1C1Im][TfO] do not crystallize up to 2.3 GPa of applied pressure. The low-frequency range of the Raman spectrum of [C4C1Im][TfO] indicates that the system undergoes glass transition, rather than crystallization, when the pressure applied on the liquid has been increased above 2.0 GPa in a single step. Strong hysteresis of spectral features (frequency shift and bandwidth) of the high-pressure crystalline phase when the pressure was released stepwise back to the atmospheric pressure has been found .

  3. Effect of unsaturation on the absorption of ethane and ethylene in imidazolium-based ionic liquids.

    PubMed

    Moura, Leila; Mishra, Manas; Bernales, Varinia; Fuentealba, Patricio; Padua, Agilio A H; Santini, Catherine C; Costa Gomes, Margarida F

    2013-06-20

    The influence of the presence of imidazolium side chain unsaturation on the solubility of ethane and ethylene was studied in three ionic liquids: 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide-saturated alkyl side-chain in the cation; 1-methyl-3-(buten-3-yl)imidazolium bis(trifluorosulfonyl)imide-double bond in the side-chain of the cation; and 1-methyl-3-benzylimidazolium bis(trifluorosulfonyl)imide-benzyl group in the side-chain of the cation. The solubility of both gases decreases when the side-chain of the cations is functionalized with an unsaturated group. This can be explained by a less favorable enthalpy of solvation. The difference of solubility between ethane and ethylene can be explained from a balance of enthalpic and entropic factors: for the ionic liquid with the saturated alkyl side-chain and the benzyl-substituted side-chain, it is the favorable entropy of solvation that explains the larger ethylene solubility, whereas in the case of the saturated side-chain, it is the more favorable enthalpy of solvation. Molecular simulation allowed the identification of the mechanisms of solvation and the preferential solvation sites for each gas in the different ionic liquids. Simulations have shown that the entropy of solvation is more favorable when the presence of the gas weakens the cation-anion interactions or when the gas can be solvated near different sites of the ionic liquid.

  4. Measurement of Ultraslow Rotational Dynamics of Probes in Imidazolium-Based Ionic Liquids Near and Below the Glass Transition Temperature: Studying the Role of Structural Heterogeneity on Dynamic Heterogeneity

    NASA Astrophysics Data System (ADS)

    Mendoza, Kayla; Udugama-Arachchilage, Rakhitha; Bardak, Fehmi; Tamas, George; Quitevis, Edward

    2014-03-01

    The dynamics of imidazolium-based ionic liquids were probed in the supercooled liquid regime by observing the fluorescence recovery after photobleaching of directionally oriented tetracene molecules. Spatial heterogeneity arises in ionic liquids containing a 1-alkyl-3-methylimidazolium cation for alkyl chain lengths equal to and exceeding four carbons; aggregation of the alkyl tails leads to the formation of non-polar domains, which increase in size with increasing alkyl chain length. Near the glass transition, supercooled liquids relax non-exponentially, and this non-exponentiality has been attributed to dynamic heterogeneity. The purpose of this study was to observe the role of structural heterogeneity on dynamic heterogeneity. The rotational dynamics of tetracene in 1-butyl-3-methylimidazolium bistriflate, 1, 3-dibutylimidazolium bistriflate, and 1-heptyl-3-methylimidazlium bistriflate were observed in the vicinity of their glass transition temperatures. From the weak dependence of the degree of non-exponentiality exhibited by the relaxation function on alky chain length and cation symmetry, it was concluded that structural heterogeneity does not play a strong role in determining dynamic heterogeneity. This work was supported by NSF grant CHE-1153077.

  5. Pretreatment of corn stover by combining ionic liquid dissolution with alkali extraction.

    PubMed

    Geng, Xinglian; Henderson, Wesley A

    2012-01-01

    Pretreatment plays an important role in the efficient enzymatic hydrolysis of biomass into fermentable sugars for biofuels. A highly effective pretreatment method is reported for corn stover which combines mild alkali-extraction followed by ionic liquid (IL) dissolution of the polysaccharides and regeneration (recovery of the polysaccharides as solids). Air-dried, knife-milled corn stover was soaked in 1% NaOH at a moderate condition (90°C, 1 h) and then thoroughly washed with hot deionized (DI) water. The alkali extraction solublized 75% of the lignin and 37% of the hemicellulose. The corn stover fibers became softer and smoother after the alkali extraction. Unextracted and extracted corn stover samples were separately dissolved in an IL, 1-butyl-3-methylimidazolium chloride (C(4) mimCl), at 130°C for 2 h and then regenerated with DI water. The IL dissolution process did not significantly change the chemical composition of the materials, but did alter their structural features. Untreated and treated corn stover samples were hydrolyzed with commercial enzyme preparations including cellulases and hemicellulases at 50°C. The glucose yield from the corn stover sample that was both alkali-extracted and IL-dissolved was 96% in 5 h of hydrolysis. This is a highly effective methodology for minimizing the enzymatic loading for biomass hydrolysis and/or maximizing the conversion of biomass polysaccharides into sugars.

  6. Characterization of compounds derived from copper-oxamate and imidazolium by X-ray absorption and vibrational spectroscopies

    NASA Astrophysics Data System (ADS)

    do Nascimento, Gustavo M.; do Pim, Walace D.; Reis, Daniella O.; Simões, Tatiana R. G.; Pradie, Noriberto A.; Stumpf, Humberto O.

    2015-05-01

    In this work, compounds derived from copper-oxamate anions (ortho, meta, and para)-phenylenebis (oxamate) and imidazolium cations (1-butyl-3-methylimidazolium) were synthesized. The compounds were characterized by Raman and FTIR spectroscopies and the band assignments were supported by DFT calculations. Strong IR bands from 1610 to 1700 cm-1 dominated the spectra of the complex and can be assigned to νCdbnd O vibrations of the [Cu(opba)]2- anions by the comparison with the DFT data. In opposition to the FTIR spectra, the main vibrational bands in the Raman spectra are observed in the 1350-1600 cm-1 range. All bands in this region are associated to the modified benzene vibrations of the copper-phenylenebis(oxamate) anions. X-ray absorption near edge (XANES) at different energies (NK and Cu L2,3 edges) was also used to probe the interionic interactions. XANES data show that anion-cation interaction in the Cu-oxamate-imidazolium changes the electronic structure around the sbnd Cusbnd Nsbnd sites in the oxamate anion.

  7. Ionic Liquid as Reaction Medium for Synthesis of Hierarchically Structured One-Dimensional MoO2 for Efficient Hydrogen Evolution.

    PubMed

    Zhang, Baohua; Xue, Yiguo; Jiang, Anning; Xue, Zhimin; Li, Zhonghao; Hao, Jingcheng

    2017-03-01

    Hierarchically structured one-dimensional (1D) MoO2 is synthesized for the first time in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][Tf2N]). The synthesis system is very simple (single [BMIM][Tf2N] solvent plus MoO2(acac)2 reactant). [BMIM][Tf2N] itself works as both the reaction medium and the template for the formation of these interesting 1D MoO2 particles with ultrathin nanosheet subunits. The as-synthesized hierarchically 1D MoO2_40 particles exhibit remarkable electrocatalytic activity with good long-term cycle stability for the hydrogen evolution reaction (HER) in acidic media. The HER activity of present synthesized MoO2 is comparable to those of the most active Mo-based electrocatalysts in acid media reported up to now. Therefore, the ionic liquid route provides us with a newly powerful tool for the synthesis of interesting alternative to noble metal catalysts for efficient electrocatalytic production of hydrogen in acidic environment.

  8. Why the partition coefficient of ionic liquids is concentration-dependent.

    PubMed

    Köddermann, Thorsten; Reith, Dirk; Arnold, A

    2013-09-19

    The partition coefficient of a substance measures its solubility in octanol compared with water and is widely used to estimate toxicity. If a substance is hardly soluble in octanol, then it is practically impossible for it to enter (human) cells and therefore is less likely to be toxic. For novel drugs it might be important to penetrate the cell through the membrane or even integrate into it. While for most simple substances the partition coefficient is concentration-independent at low concentrations, this is not true for a few important classes of complex molecules, such as ionic liquids or tensides. We present a simple association-dissociation model for concentration dependence of the partition coefficient of ionic liquids. Atomistic computer simulations serve to parametrize our model by calculating solvation free energies in water and octanol using thermodynamic integration. We demonstrate the validity of the method by reproducing the concentration-independent partition coefficients of small alcohols and the concentration-dependent partition coefficient of a commonly used ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C4MIM][NTf2]. The concentration dependence is accurately predicted in a concentration range of several orders of magnitude.

  9. The glass-liquid transition of water on hydrophobic surfaces.

    PubMed

    Souda, Ryutaro

    2008-09-28

    Interactions of thin water films with surfaces of graphite and vitrified room-temperature ionic liquid [1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)])] were investigated using time-of-flight secondary ion mass spectrometry as a function of temperature and annealing time to elucidate the glass-liquid transition of water at the molecular level. Surface diffusion of water occurs at temperatures higher than 120 K, thereby forming three-dimensional clusters (a two-dimensional layer) on the [bmim][PF(6)] (graphite) surface. The hydrophobic effect of the surface decreases with increasing coverage of water; the bulklike properties evolve up to 40 ML, as evidenced by the occurrence of film dewetting at around the conventional glass transition temperature (140 K). Results also showed that aging is necessary for the water monolayer (a 40 ML water film) to dewet the graphite ([bmim][PF(6)]) surface. The occurrence of aging is explainable by the successive evolution of two distinct liquids during the glass-liquid transition: low density liquid is followed by supercooled liquid water. The water monolayer on graphite is characterized by the preferred orientation of unpaired OH groups toward the surface; this structure is arrested during the aging time despite the occurrence of surface diffusion. However, the water monolayer formed on the [bmim][PF(6)] surface agglomerates immediately after the commencement of surface diffusion. The structure of low density liquid tends to be arrested by the attractive interaction with the neighbors.

  10. [Effects of imidazolium chloride ionic liquids on the acute toxicity and weight of earthworm].

    PubMed

    Huang, Ruo-Nan; Fan, Jun-Jie; Tu, Hong-Zhi; Tang, Ling-Yan; Liu, Hui-Jun; Xu, Dong-Mei

    2013-04-01

    Standard contact filter paper test of OECD and artificial soil test were used to study the acute lethal effect of three imidazolium chloride ionic liquids, 1-butyl- 3-methylimidazolium chloride ([Bmim] Cl), 1-hexyl- 3-methylimidazolium chloride ([Hmim] Cl), and 1-octyl- 3-methylimidazolium chloride ([Omim] Cl) on earthworm (Eisenia fetida), and the weight of the earthworms was measured after subtle exposure. The 24 h-LC50 values of [Bmim] Cl, [Hmim] Cl and [Omim] Cl using the contact filter paper method were 109.60, 50.38 and 7.94 microg x cm(-2), respectively. The 48 h-LC50 values were 98.52, 39.14 and 3.61 microg x cm(-2), respectively. Using the artificial soil method, the 7 d-LC50 values of [Bmim] Cl, [Hmim] Cl and [Omim] Cl were 447.78, 245.56 and 180.51 mg x kg(-1), respectively, and the 14 d-LC50 values were 288.42, 179.75, 150.35 mg x kg(-1), respectively. There were differences in poisoning symptoms of the three ionic liquids on earthworms. The growth of Eisenia fetida was inhibited and declined with increasing ionic liquid concentration. The toxicity of ionic liquids on Eisenia fetida increased with the length of carbon chain.

  11. DFT Study of the Reaction Mechanisms of Carbon Dioxide and its Isoelectronic Molecules CS2 and OCS Dissolved in Pyrrolidinium and Imidazolium Acetate Ionic Liquids.

    PubMed

    Danten, Y; Cabaço, M I; Coutinho, J A P; Pinaud, Noël; Besnard, M

    2016-06-16

    The reaction mechanisms of CO2 and its isoelectronic molecules OCS and CS2 dissolved in N-butyl-N-methylpyrrolidinium acetate and in 1-butyl-3-methylimidazolium acetate were investigated by DFT calculations in "gas phase". The analysis of predicted multistep pathways allowed calculating energies of reaction and energy barriers of the processes. The major role played by the acetate anion in the degradation of the solutes CS2 and OCS as well as in the capture of OCS and CO2 by the imidazolium ring is highlighted. In both ionic liquids, this anion governs the conversion of CS2 into OCS and of OCS into CO2 through interatomic S-O exchanges between the anion and the solutes with formation of thioacetate anions. In imidazolium acetate, the selective capture of CS2 and OCS by the imidazolium ring competes with the S-O exchanges. From the calculated values of the energy barriers a basicity scale of the anions is proposed. The (13)C NMR chemical shifts of the predicted adducts were calculated and agree well with the experimental observations. It is argued that the scenario issued from the calculated pathways is shown qualitatively to be independent from the functionals and basis set used, constitute a valuable tool in the understanding of chemical reactions taking place in liquid phase.

  12. Interfacial Restructuring of Ionic Liquids Determined by Sum-Frequency Generation Spectroscopy and X-ray Reflectivity

    SciTech Connect

    Jeon, Yoonnam; Sung, Jaeho; Bu, Wei; Vaknin, David; Ouchi, Yukio; Kim, Doseok

    2009-01-16

    Surface sum-frequency generation spectroscopy and X-ray reflectivity were used to study the surface of [BMIM][X] ionic liquids (BMIM = 1-butyl-3-methylimidazolium cation, X = BF{sub 4}{sup -}, PF{sub 6}{sup -}, and I{sup -}). Sum-frequency signal strength from the terminal methyl groups of the cation at the surface indicates that the topmost surface of these ionic liquids is occupied by polar-oriented hydrophobic butyl chains having approximately 1/3 of the in-plane density of fully packed alkyl chains as observed by the same method for the hexadecanol Langmuir monolayer. X-ray reflectivity data reveal a layer with density larger than that of bulk. However, the reflectivity is not sufficiently sensitive to the exact location of this layer either at the vacuum interface or sandwiched between the bulk and the low-density alkyl chain, as observed in the sum-frequency measurements. Analysis of the reflectivity data in conjunction with the sum-frequency spectra strongly suggests the molecules forming the topmost layer are on average polar-oriented with their (loosely packed) butyl chains toward the gas/liquid interface, while the (densely packed) imidazolium cores/anions are in contact with the bulk liquid.

  13. Characterization of compounds derived from copper-oxamate and imidazolium by X-ray absorption and vibrational spectroscopies.

    PubMed

    do Nascimento, Gustavo M; do Pim, Walace D; Reis, Daniella O; Simões, Tatiana R G; Pradie, Noriberto A; Stumpf, Humberto O

    2015-05-05

    In this work, compounds derived from copper-oxamate anions (ortho, meta, and para)-phenylenebis (oxamate) and imidazolium cations (1-butyl-3-methylimidazolium) were synthesized. The compounds were characterized by Raman and FTIR spectroscopies and the band assignments were supported by DFT calculations. Strong IR bands from 1610 to 1700cm(-1) dominated the spectra of the complex and can be assigned to νCO vibrations of the [Cu(opba)](2-) anions by the comparison with the DFT data. In opposition to the FTIR spectra, the main vibrational bands in the Raman spectra are observed in the 1350-1600cm(-1) range. All bands in this region are associated to the modified benzene vibrations of the copper-phenylenebis(oxamate) anions. X-ray absorption near edge (XANES) at different energies (NK and Cu L2,3 edges) was also used to probe the interionic interactions. XANES data show that anion-cation interaction in the Cu-oxamate-imidazolium changes the electronic structure around the CuN sites in the oxamate anion.

  14. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules

    PubMed Central

    Su, Jielong; Raghuwanshi, Vikram S.; Raverty, Warwick; Garvey, Christopher J.; Holden, Peter J.; Gillon, Marie; Holt, Stephen A.; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-01-01

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR. PMID:27796332

  15. Ionic liquid and aqueous two-phase extraction based on salting-out coupled with high-performance liquid chromatography for the determination of seven rare ginsenosides in Xue-Sai-Tong injection.

    PubMed

    Li, Lan-Jie; Jin, Yong-Ri; Wang, Xiao-Zhong; Liu, Ying; Wu, Qian; Shi, Xiao-Lei; Li, Xu-Wen

    2015-09-01

    A method of ionic liquid salt aqueous two-phase extraction coupled with high-performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg6 , F4 , 20(S)-Rg3 , 20(R)-Rg3 , Rk3 , Rk1 , and Rg5 in Xue-Sai-Tong injection. The injection was mixed with ionic liquid 1-butyl-3-methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two-phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue-Sai-Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.

  16. Effect of a room-temperature ionic liquid on the structure and properties of electrospun poly(vinylidene fluoride) nanofibers.

    PubMed

    Xing, Chenyang; Guan, Jipeng; Li, Yongjin; Li, Jingye

    2014-03-26

    Novel anti-static nanofibers based on blends of poly(vinylidene fluoride) (PVDF) and a room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6], were fabricated using an electrospinning approach. The effects of the RTIL on the morphology, crystal structure, and physical properties of the PVDF nanofibers were investigated. Incorporation of RTIL leads to an increase in the mean fiber diameter and the rough fiber surface of the PVDF/RTIL composite nanofibers compared with the neat PVDF nanofibers. The PVDF in the PVDF/RTIL nanofibers exhibits an extremely high content (almost 100%) of β crystals, in contrast to the dominance of PVDF γ crystals in bulk melt-blended PVDF/RTIL blends. Nonwoven fabrics produced from the electrospun PVDF/RTIL composite nanofibers show better stretchability and higher electrical conductivity than those made from neat PVDF without RTIL, and are thus excellent antielectrostatic fibrous materials. In addition, RTIL greatly improved the hydrophobicity of the PVDF fibers, enabling them to effectively separate a mixture of tetrachloromethane (CCl4) and water. The extremely high β content, excellent antielectrostatic properties, better stretchability, and hydrophobicity of the present PVDF/RTIL nanofibers make them a promising candidate for micro- and nanoscale electronic device applications.

  17. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules.

    PubMed

    Su, Jielong; Raghuwanshi, Vikram S; Raverty, Warwick; Garvey, Christopher J; Holden, Peter J; Gillon, Marie; Holt, Stephen A; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-10-31

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR.

  18. Two solid-phase recycling method for basic ionic liquid [C4mim]Ac by macroporous resin and ion exchange resin from Schisandra chinensis fruits extract.

    PubMed

    Ma, Chun-hui; Zu, Yuan-gang; Yang, Lei; Li, Jian

    2015-01-22

    In this study, two solid-phase recycling method for basic ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim]Ac) were studied through a digestion extraction system of extracting biphenyl cyclooctene lignans from Schisandra chinensis. The RP-HPLC detection method for [C4mim]Ac was established in order to investigate the recovery efficiency of IL. The recycling method of [C4mim]Ac is divided into two steps, the first step was the separation of lignans from the IL solution containing HPD 5000 macroporous resin, the recovery efficiency and purity of [C4mim]Ac achieved were 97.8% and 67.7%, respectively. This method cannot only separate the lignans from [C4mim]Ac solution, also improve the purity of lignans, the absorption rate of lignans in [C4mim]Ac solution was found to be higher (69.2%) than that in ethanol solution (57.7%). The second step was the purification of [C4mim]Ac by the SK1B strong acid ion exchange resin, an [C4mim]Ac recovery efficiency of 55.9% and the purity higher than 90% were achieved. Additionally, [C4mim]Ac as solvent extraction of lignans from S. chinensis was optimized, the hydrolysis temperature was 90°C and the hydrolysis time was 2h.

  19. Field Effect Transistors Using Atomically Thin Layers of Copper Indium Selenide (CuInSe)

    NASA Astrophysics Data System (ADS)

    Patil, Prasanna; Ghosh, Sujoy; Wasala, Milinda; Lei, Sidong; Vajtai, Robert; Ajayan, Pulickel; Talapatra, Saikat

    We will report fabrication of field-effect transistors (FETs) using few-layers of Copper Indium Selenide (CuInSe) flakes exfoliated from crystals grown using chemical vapor transport technique. Our transport measurements indicate n-type FET with electron mobility µ ~ 3 cm2 V-1 s-1 at room temperature when Silicon dioxide (SiO2) is used as a back gate. Mobility can be further increased significantly when ionic liquid 1-Butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) is used as top gate. Similarly subthreshold swing can be further improved from 103 V/dec to 0.55 V/dec by using ionic liquid as a top gate. We also found ON/OFF ratio of ~ 102 for both top and back gate. Comparison between ionic liquid top gate and SiO2 back gate will be presented and discussed. This work is supported by the U.S. Army Research Office through a MURI Grant # W911NF-11-1-0362.

  20. Morphology- and facet-controlled synthesis of CuO micro/nanomaterials and analysis of their lithium ion storage properties

    NASA Astrophysics Data System (ADS)

    Liu, Xiaodi; Liu, Guangyin; Wang, Lijuan; Li, Yinping; Ma, Yupei; Ma, Jianmin

    2016-04-01

    Hierarchical CuO architectures and monodisperse CuO nanoplates are synthesized via a hydrothermal method with the assistance of ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The products are characterized by XRD, SEM, TEM, HRTEM, BET, and XPS, and the results indicate that the CuO architectures are composed of nanosheets with exposed (001) facets and the CuO nanoplates are single crystals enclosed by (200) facets. More specially, it is found that [Bmim]Cl serves as an effective template for the synthesis of CuO nanoplates by adsorbing on the (200) planes of monoclinic CuO. When evaluated as anode materials for lithium-ion batteries, CuO architectures possess higher discharge capacity, better cycling stability, and better rate capability than CuO nanoplates. The initial discharge capacity of CuO architectures is 1096 mAh g-1 at a rate of 0.5 C, whereas CuO nanoplates exhibit a lower capacity of 878.4 mAh g-1. Moreover, after 50 cycles, CuO architectures and CuO nanoplates can deliver discharge capacities of 465.6 and 281.6 mAh g-1, respectively.

  1. Noncovalent approach to one-dimensional ion conductors: enhancement of ionic conductivities in nanostructured columnar liquid crystals.

    PubMed

    Shimura, Harutoki; Yoshio, Masafumi; Hoshino, Koji; Mukai, Tomohiro; Ohno, Hiroyuki; Kato, Takashi

    2008-02-06

    Noncovalent design of new liquid-crystalline (LC) columnar assemblies based on an ionic liquid has shown to be useful to achieve anisotropic high ionic conductivities. An equimolar mixture of an ionic liquid, 1-butyl-3-methylimidazolium bromide, and 3-[3,4,5-tri(octyloxy)benzoyloxy]propane-1,2-diol, which is partially miscible with the ionic liquid, exhibits an LC hexagonal columnar phase from -4 to 63 degrees C. This columnar supramolecular assembly forming the nanostructures shows the one-dimensional (1D) ionic conductivity of 3.9 x 10(-3) S cm(-1) at 50 degrees C along the column, which is more than 700 times higher than that of the corresponding covalent-type columnar ionic liquid, 1-methyl-3-[3,4,5-tri(octyloxy)benzyl]imidazolium bromide, which is 5.3 x 10(-6) S cm(-1) at 50 degrees C. This significant enhancement of the ionic conductivity is attributed to the increase of the mobility of the ionic part.

  2. Ultrasensitive electrochemical biosensor based on reduced graphene oxide-tetraethylene pentamine-BMIMPF6 hybrids for the detection of α2,6-sialylated glycans in human serum.

    PubMed

    Li, Yuliang; He, Junlin; Niu, Yazhen; Yu, Chao

    2015-12-15

    In this paper, a simple, ultrasensitive and label-free electrochemical α2,6-sialylated glycans biosensor based on reduced graphene oxide-tetraethylene pentamine-1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) hybrids was developed. Due to the abundance of amino groups from reduced graphene oxide-tetraethylene pentamine (rGO-TEPA) and the electrostatic interaction of BMIMPF6, bimetallic gold platinum alloy nanoparticles (AuPtNPs) were densely adsorbed onto the surface of the nanocomposite, providing a large surface area available for the immobilization of Sambucus nigra agglutinin (SNA). AuPtNPs have excellent conductivity and catalytic activity, which can promote electron transfer between the electrolyte solution and the surface of electrode and can enhance the sensitivity of biosensor. SNA, which specifically binds α2,6-sialylated glycans, was covalently immobilized on AuPtNPs for specific detection of α2,6-sialylated glycans in human serum. Under optimal experimental conditions, amperometric response changes were used to detect α2,6-sialylated glycans with a broad linear range of 10 fg mL(-1) -1 μg mL(-1) and a low detection limit of 3 fg mL(-1) (S/N=3). When applied to spiked serum samples, the recovery of the developed biosensor ranged from 100.8% to 101.4%, suggesting that the electrochemical biosensor would be suitable for the practical detection of α2,6-sialylated glycans.

  3. Comparative investigation of underpotential deposition of Ag from aqueous and ionic electrolytes: An electrochemical and in situ STM study.

    PubMed

    Borissov, D; Aravinda, C L; Freyland, W

    2005-06-16

    Underpotential deposition (UPD) of Ag on Au(111) has been studied with two different electrolytes: aqueous 0.1 M H2SO4 solution in comparison with the ionic liquid 1-butyl-3-methylimidazolium chloride BMICl + AlCl3. Of particular interest is the distinct behavior of 2D phase formation at both interfaces, which has been investigated by cyclic and linear sweep voltammetry in combination with in situ electrochemical scanning tunneling microscopy (STM). It is found that one monolayer (ML) of Ag is formed in the UPD region in both electrolytes. In aqueous solution, atomically resolved STM images at 500 mV versus Ag/Ag+ show a (3 x 3) adlayer of Ag, whereas after sweeping the potential just before the commencement of the bulk Ag deposition, a transition from expanded (3 x 3) to pseudomorphic ML of Ag on Au(111) occurs. In BMICl-AlCl3, the first UPD process of Ag exhibits two peaks at 410 and 230 mV indicating that two distinct processes on the surface take place. For the first time, STM images with atomic resolution reveal a transition from an inhomogeneous to an ordered phase with a (square root of 3 x square root of 3)R30 degrees structure and an adsorption of AlCl4- anions having a superlattice of (1.65 x square root of 3)R30 degrees preceding the deposition of Ag.

  4. Comparative ecotoxicology study of two neoteric solvents: Imidazolium ionic liquid vs. glycerol derivative.

    PubMed

    Perales, Eduardo; García, Cristina Belén; Lomba, Laura; Aldea, Luis; García, José Ignacio; Giner, Beatriz

    2016-10-01

    In this study we have compared the acute ecotoxicity of two solvents, with very different structure and origin, but sharing many physical-chemical properties, so they can be used for similar purposes; a well-known ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and a solvent partially derived from biomass, 3-bis(2,2,2-trifluoroethoxy)propan-2-ol (BTFIP). We have used three biomodels (Vibrio fischeri, Daphnia magna and Danio rerio) and performed the comparison applying the Environmental, Health and Safety (EHS) hazard assessment. According to the results, ecotoxicity of [BMIM][PF6] and BTFIP is quite similar in the simplest model Vibrio fischeri, while in Daphnia magna [BMIM][PF6] is clearly more toxic. However, in Danio rerio, toxicity of these chemicals is again quite similar and both can be classified as "nontoxic". The higher index value of [BMIM][PF6] in water mediate effect in the EHS assessment indicates that this ionic liquid is more dangerous than BTFIP, although accumulation and degradation properties have not been taken into account. Further studies will be necessary to ascertain these conclusions.

  5. Esterification of potato starch by a biocatalysed reaction in an ionic liquid.

    PubMed

    Zarski, Arkadiusz; Ptak, Sylwia; Siemion, Przemyslaw; Kapusniak, Janusz

    2016-02-10

    In this study, potato starch was esterified with oleic acid, using 1-butyl-3-methylimidazolium chloride as a reaction medium and an immobilised lipase from Thermomyces lanuginosus as a catalyst. The degree of substitution (DS) of the products was determined by the volumetric method; and the best esterified product (with the highest DS) was determined by an elemental analysis. The effect of the reaction parameters on the DS, such as the time and the temperature, were also studied. The product with the highest DS (0.22) was found in the reaction carried out at 60 °C for 4h. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses confirmed the esterification of the potato starch. Furthermore, the results of X-ray diffraction (XRD) and a scanning electron microscopy (SEM) revealed that the crystallinity and the morphology of the native potato starch was slightly changed during its partial gelatinisation in the ionic liquid, and was completely destroyed as a result of the formation of the esters. The thermal stability of the starch oleate decreased, when compared to the unmodified starch, as was indicated by a thermal gravimetric analysis (TGA).

  6. Oligomerization of n-butenes catalyzed by nickel complexes dissolved in organochloroaluminate ionic liquids

    SciTech Connect

    Chauvin, Y.; Olivier, H.; Wyrvalski, C.N.

    1997-01-15

    The industrial synthesis of higher olefins is generally performed via oligomerization of lower olefins by transition metal complexes or acidic catalysts. The broad variety of olefins that are nowadays produced by these reactions are used as polyethylene co-monomers or as intermediates in the synthesis of detergents, surface active compounds, lubricating oils, and plasticizers. Thus, in the Dimersol{reg_sign} process, butenes are dimerized into C{sub 8} olefins which are usually further hydroformylated giving C{sub 9} alcohols used in the manufacture of plasticizers. In spite of important research efforts devoted to these homogeneous phase oligomerization reactions, activity and conversion still need to be improved. In a more general sense, the separation of the products from the catalyst and the solvent is a major drawback, which leads to increased operational costs and environmental impact. Organochloroaluminate ionic liquids have been envisioned as solvents of nickel catalysts in oligomerization reactions to overcome this technical limitation. The solubility of nickel complexes and the poor solubility of olefins in polar and non-coordinating ionic liquids make possible the separation of the reaction products by simple decantation, with low costs and absence of by-products. In the present article, the authors report the use of 1-butyl-3-methylimidazolium chloro-ethyl-aluminate ionic liquids as solvents in butene oligomerization catalyzed by nickel complexes in a two-phase system. 24 refs., 2 figs., 2 tabs.

  7. All-cellulose and all-wood composites by partial dissolution of cotton fabric and wood in ionic liquid.

    PubMed

    Shibata, Mitsuhiro; Teramoto, Naozumi; Nakamura, Taro; Saitoh, Yoshinobu

    2013-11-06

    After cotton fabric (CF) and hinoki lumber (HL) were dipped in 1-butyl-3-methylimidazolium chloride (BMIMCl) at 100 °C, the BMIMCl-impregnated CF and HL were hot-pressed to give CF-BMIMCl and HL-BMIMCl composites, respectively. The BMIMCl contained in the composites was removed by Soxhlet extraction, and subsequently annealed to produce all-cellulose and all-wood composites (CF-A and HL-A). The SEM analyses revealed that cellulose fibers combined together for CF-A and the surface of HL-A became smooth, respectively. The XRD measurements indicated that the crystallinity index of cellulose component decreased by the hot press, increased by the extraction, and further increased by the annealing for both the composites. The tensile modulus of CF-A increased with increasing pressure of hot-press. Although tensile strength of HL-A was a little lower than that of original HL, tensile modulus of the former was much higher than that of the latter.

  8. Ionic liquid biodegradability depends on specific wastewater microbial consortia.

    PubMed

    Docherty, Kathryn M; Aiello, Steven W; Buehler, Barbara K; Jones, Stuart E; Szymczyna, Blair R; Walker, Katherine A

    2015-10-01

    Complete biodegradation of a newly-synthesized chemical in a wastewater treatment plant (WWTP) eliminates the potential for novel environmental pollutants. However, differences within- and between-WWTP microbial communities may alter expectations for biodegradation. WWTP communities can also serve as a source of unique consortia that, when enriched, can metabolize chemicals that tend to resist degradation, but are otherwise promising green alternatives. We tested the biodegradability of three ionic liquids (ILs): 1-octyl-3-methylpyridinium bromide (OMP), 1-butyl-3-methylpyridinium bromide (BMP) and 1-butyl-3-methylimidazolium chloride (BMIM). We performed tests using communities from two WWTPs at three time points. Site-specific and temporal variation both influenced community composition, which impacted the success of OMP biodegradability. Neither BMP nor BMIM degraded in any test, suggesting that these ILs are unlikely to be removed by traditional treatment. Following standard biodegradation assays, we enriched for three consortia that were capable of quickly degrading OMP, BMP and BMIM. Our results indicate WWTPs are not functionally redundant with regard to biodegradation of specific ionic liquids. However, consortia can be enriched to degrade chemicals that fail biodegradability assays. This information can be used to prepare pre-treatment procedures and prevent environmental release of novel pollutants.

  9. Development of Bitter Taste Sensor Using Ionic-Liquid/Polymer Membranes

    NASA Astrophysics Data System (ADS)

    Akutagawa, Nobuyuki; Toida, Jinichi; Amano, Yoshihiko; Ikezaki, Hidekazu; Toko, Kiyoshi; Arikawa, Yukihiko

    A taste sensor is composed of several kinds of lipid/polymer membranes as transducers which convert taste information to electric signal. Thus, the role of membranes is very important to detect various taste components. In this paper, we developed novel membranes which specifically respond to quinine that is typical bitter substances. These membranes were composed of hydrophobic ionic liquid such as N, N, N-trimethyl-N-propylammonium bis(trifluoromethansulfonyl)imide, 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butylpyridinium hexafluorophosphate, a plasticizer, 2-nitrophenyl octyl ether and a polymer, polyvinyl chloride. In addition to quinine, they also showed response to both several kinds of alkaloids such as caffeine and strychnine, and non-alkaloid such as phenylthiocarbamide. The order of these responses was equal to that of the tongue glossopharyngeal nerve of flog. Furthermore, there were the other alkaloids which response to these membranes. Especially in these alkaloids, they showed high response to denatonium benzoate and berberin chloride which have a strong bitter taste.

  10. Hydrothermal microwave valorization of eucalyptus using acidic ionic liquid as catalyst toward a green biorefinery scenario.

    PubMed

    Xu, Ji-Kun; Chen, Jing-Huan; Sun, Run-Cang

    2015-10-01

    The application of the acidic ionic liquid (IL), 1-butyl-3-methylimidazolium hydrogensulfate ([bmim]HSO4), as a catalyst in the hydrothermal microwave treatment (HMT) and green upgradation of eucalyptus biomass has been investigated. The process was carried out in a microwave reactor system at different temperatures (140-200°C) and evaluated for severities. The xylooligosaccharides (XOS, refers to a DP of 2-6) yield up to 5.04% (w/w) of the initial biomass and 26.72% (w/w) of xylan were achieved. Higher temperature resulted in lower molecular weight product, and enhanced the concentration of monosaccharides and byproducts. The morphology and structure of the solid residues were performed using an array of techniques, such as SEM, XRD, FTIR, BET surface area, and CP/MAS (13)C NMR, by which the increase of crystallinity, the destruction of surface structure, and the changes in functional groups and compositions were studied after the pretreatment, thus significantly enhancing the enzymatic hydrolysis.

  11. Self-healing guar gum and guar gum-multiwalled carbon nanotubes nanocomposite gels prepared in an ionic liquid.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2013-10-15

    Guar gum is a galactomannan extracted from the seed of the leguminous shrub Cyamopsis tetragonoloba. It was found to form a soft viscoelastic gel in 1-butyl-3-methylimidazolium chloride, an ionic liquid at an optimized concentration of 10%w/v. A nanocomposite gel of the gum with enhanced strength could be prepared with 0.2%w/v of multiwalled carbon nanotubes (MWCNTs) in the ionic liquid. When the gels thus prepared were subjected to surface fractures or bisected completely, they found to self-heal at room temperature without any external interventions. The self-healing process could be repeated several times. These viscoelastic gel systems showed thixotropic nature and recovery of the storage modulus with time for several cycles was observed upon rheological investigations. The interaction took place between ionic liquid, guar gum and MWCNT was studied by SEM, TEM, FT-IR, powder XRD and rheometry. The results suggested that, upon standing at room temperature development of electrostatic interactions and the van der Waals interactions among the ionic liquid molecules facilitated the formation of reversible noncovalent bonds and eventually activated the self-healing in the gel systems through appropriate chain entanglements.

  12. Heterogeneity in a room-temperature ionic liquid: persistent local environments and the red-edge effect.

    PubMed

    Hu, Zhonghan; Margulis, Claudio J

    2006-01-24

    In this work, we investigate the slow dynamics of 1-butyl-3-methylimidazolium hexafluorophosphate, a very popular room-temperature ionic solvent. Our study predicts the existence of heterogeneity in the liquid and shows that this heterogeneity is the underlying microscopic cause for the recently reported "red-edge effect" (REE) observed in the study of fluorescence of the organic probe 2-amino-7-nitrofluorene. This theoretical work explains in microscopic terms the relation between REE and dynamic heterogeneity in a room-temperature ionic liquid (IL). The REE is typical of micellar or colloidal systems, which are characterized by microscopic environments that are structurally very different. In contrast, in the case of this room-temperature IL, the REE occurs because of the long period during which molecules are trapped in quasistatic local solvent cages. This trapping time, which is longer than the lifetime of the excited-state probe, together with the inability of the surroundings to adiabatically relax, induces a set of site-specific spectroscopic responses. Subensembles of fluorescent molecules associated with particular local environments absorb and emit at different frequencies. We describe in detail the absorption wavelength-dependent emission spectra of 2-amino-7-nitrofluorene and show that this dependence on lambda(ex) is characteristic of the IL and, as is to be expected, is absent in the case of a normal solvent such as methanol.

  13. A novel ionic liquid/micro-volume back extraction procedure combined with flame atomic absorption spectrometry for determination of trace nickel in samples of nutritional interest.

    PubMed

    Dadfarnia, Shayesteh; Shabani, Ali Mohammad Haji; Bidabadi, Mahboubeh Shirani; Jafari, Abbas Ali

    2010-01-15

    A simple, highly sensitive and environment-friendly method for the determination of trace amount of nickel ion in different matrices is proposed. In the preconcentration step, the nickel from 10 mL of an aqueous solution was extracted into 500 microL of ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C(4)MIM][PF(6)], containing PAN as complexing agent. Subsequently, the PAN complex was back-extracted into 250 microL of nitric acid solution, and 100 microL of it was analyzed by flow injection flame atomic absorption spectrometry (FI-FAAS). The main parameter influencing the extraction and determination of nickel, such as pH, concentration of PAN, extraction time and temperature, ionic strength, and concentration of stripping acid solution, were optimized. An enhancement factor of 40.2 was achieved with 25 mL sample. The limit of detection (LOD) and quantification obtained under the optimum conditions were 12.5 and 41.0 microg L(-1), respectively. To validate the proposed methods two certified reference materials 681-I and BCR No. 288 were analyzed and the results were in good agreement with the certified values. The proposed method was successfully applied to determination of nickel in water samples, rice flour and black tea.

  14. New Alkylether-Thiazolium Room-Temperature Ionic Liquid Lubricants: Surface Interactions and Tribological Performance.

    PubMed

    Espinosa, Tulia; Sanes, José; Bermúdez, María-Dolores

    2016-07-20

    The use of newly synthesized alkylether-thiazolium ionic liquids as lubricants is described for the first time. Two ionic liquids composed of a thiazolium cation and a bis(trifluoromethanesulfonyl)amide ([Th][Tf2N]) or dicyanamide ([Th][(NC)2N]) anion have been studied, and their tribological behavior has been compared with that of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([Im][Tf2N]) in pin-on-disk tests using sapphire balls against AISI 52100 or AISI 316L steels. All ionic liquids show higher contact angles on AISI 316L steel than on AISI 52100, the lowest values found for ([Im][Tf2N]) on both steel surfaces. AISI 52100 shows similar friction coefficients for all lubricants, and negligible wear rates for the ionic liquids containing the bis(trifluoromethanesulfonyl)amide anion. Immersion tests show no corrosion of AISI 52100 in imidazolium or thiazolium bis(trifluoromethanesulfonyl)amide ionic liquids. AISI 316L shows similar friction coefficients for both bis(trifluoromethanesulfonyl)amide ionic liquids, but the lowest wear rate is obtained for [Th][Tf2N]. An increase in friction coefficient and wear rate is observed for thiazolium dicyanamide. This increase is related to a tribocorrosion process due to decomposition of the thiazolium cation. XPS shows the formation of iron sulfide on the wear track on AISI 316L after lubrication with thiazolium dicyanamide. No tribocorrosion processes take place for the [Tf2N] ionic liquids.

  15. Syntheses and crystal structures of benzene-sulfonate and -carboxylate copper polymers and their application in the oxidation of cyclohexane in ionic liquid under mild conditions.

    PubMed

    Hazra, Susanta; Ribeiro, Ana P C; Guedes da Silva, M Fátima C; Nieto de Castro, Carlos A; Pombeiro, Armando J L

    2016-09-21

    The syntheses, crystal structures and catalytic activities of the polymers derived from 2-(2-pyridylmethyleneamino)benzenesulfonic acid (HL), viz. [CuL(H2tma)]n (1) and [{Cu2L2(H2pma)}·(8H2O)]n (2) [H3tma = benzene-1,3,5-tricarboxylic (trimesic) acid and H4pma = benzene-1,2,4,5-tetracarboxylic (pyromellitic) acid], are presented. Despite the comparable combinations and compositions of ligands (sulfonate and carboxylate) in these two polymers the bridging moiety in 1 is sulfonate while in 2 it is carboxylate. Complexes 1 and 2 act as catalysts in the peroxidative oxidation of cyclohexane under mild conditions using either the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF6] or acetonitrile as the solvent. The ionic liquid medium leads to increases in the yields and in the turnover numbers, achieved in shorter reaction times in comparison with those when using the conventional acetonitrile solvent. A simple recycling of the catalysts in the ionic liquid medium is achieved without loss of activity and selectivity.

  16. Ligandless ultrasonic-assisted and ionic liquid-based dispersive liquid-liquid microextraction of copper, nickel and lead in different food samples.

    PubMed

    Jalbani, N; Soylak, M

    2015-01-15

    A simple and rapid ultrasonic assisted-ionic liquid based-liquid-liquid microextraction (UA-IL-DLLME) method has been developed for the enrichment and separation of Cu(II), Ni(II) and Pb(II). A two level factorial design was used to determine the effect of key factors such as pH, volume of ionic liquid (IL), carbon tetra chloride (CCl4) and sonication time (St). 1-Butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) and CCl4 were used as an extractant and dispersant solvent, respectively. The accuracy of the proposed method was evaluated by analysing of SRM Apple Leaves 1515 certified reference material. The limits of detections (LODs) were 0.17 μg/L, 0.49 μg/L and 0.95 μg/L for Cu, Ni and Pb, respectively. The enrichment factor (EF) was 100. The method has been successfully applied for the analysis of the content of Cu, Ni and Pb in spice, vegetable and fruit samples by flame atomic absorption spectrometry (FAAS).

  17. Self-Assembled Functional Nanostructure of Plasmid DNA with Ionic Liquid [Bmim][PF₆]: Enhanced Efficiency in Bacterial Gene Transformation.

    PubMed

    Soni, Sarvesh K; Sarkar, Sampa; Mirzadeh, Nedaossadat; Selvakannan, P R; Bhargava, Suresh K

    2015-04-28

    The electrostatic interaction between the negatively charged phosphate groups of plasmid DNA and the cationic part of hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]), initiates spontaneous self-assembly to form the functional nanostructures made up of DNA and ionic liquid (IL). These functional nanostructures were demonstrated as promising synthetic nonviral vectors for the efficient bacterial pGFP gene transformation in cells. In particular, the functional nanostructures that were made up of 1 μL of IL ([Bmim][PF6]) and 1 μg of plasmid DNA can increase the transformation efficiency by 300-400% in microbial systems, without showing any toxicity for E. coli DH5α cells. (31)P nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron (XPS) spectroscopic analysis revealed that the electrostatic interaction between negatively charged phosphate oxygen and cationic Bmim(+) tends to initiate the self-assembly process. Thermogravimetric analysis of the DNA-IL functional nanostructures showed that these nanostructures consist of ∼16 wt % ionic liquid, which is considered to provide the stability to the plasmid DNA that eventually enhanced the transformation efficiency.

  18. Extraction of testosterone and epitestosterone in human urine using aqueous two-phase systems of ionic liquid and salt.

    PubMed

    He, Chiyang; Li, Shehong; Liu, Huwei; Li, Kean; Liu, Feng

    2005-08-05

    Based on aqueous two-phase systems (ATPS) consisting of 1-butyl-3-methylimidazolium chloride, a hydrophilic ionic liquid (IL), and K2HPO4, a new and simple extraction technique, coupled with a reversed-phase high performance liquid chromatography (RP-HPLC), was developed for the simultaneous concentration and analysis of testosterone (T) and epitestosterone (ET) in human urine. Under the optimal conditions, the extraction efficiencies for both analytes were 80-90% in a one-step extraction. The method required only 3.0 mL of urine and a single hydrolysis/deproteinization/extraction step followed by direct injection of the IL-rich upper phase into HPLC system for analysis. The method has been satisfactorily applied to the analysis of T and ET in human urine with detection limits of 1 ng/mL and linear ranges of 10-500 ng/mL for both compounds. Compared with conventional liquid-liquid extraction or solid phase extraction, this new method is much "greener" due to no use of volatile organic solvent and low consumption of IL. The proposed extraction technique opens up new possibilities in the separation of other drugs.

  19. Speciation of rare-earth metal complexes in ionic liquids: a multiple-technique approach.

    PubMed

    Nockemann, Peter; Thijs, Ben; Lunstroot, Kyra; Parac-Vogt, Tatjana N; Görller-Walrand, Christiane; Binnemans, Koen; Van Hecke, Kristof; Van Meervelt, Luc; Nikitenko, Sergey; Daniels, John; Hennig, Christoph; Van Deun, Rik

    2009-01-01

    The dissolution process of metal complexes in ionic liquids was investigated by a multiple-technique approach to reveal the solvate species of the metal in solution. The task-specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf(2)N]) is able to dissolve stoichiometric amounts of the oxides of the rare-earth elements. The crystal structures of the compounds [Eu(2)(bet)(8)(H(2)O)(4)][Tf(2)N](6), [Eu(2)(bet)(8)(H(2)O)(2)][Tf(2)N](6) x 2 H(2)O, and [Y(2)(bet)(6)(H(2)O)(4)][Tf(2)N](6) were found to consist of dimers. These rare-earth complexes are well soluble in the ionic liquids [Hbet][Tf(2)N] and [C(4)mim][Tf(2)N] (C(4)mim = 1-butyl-3-methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, (1)H, (13)C, and (89)Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X-ray absorption fine structure) and HEXS (high-energy X-ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.

  20. Choline chloride-thiourea, a deep eutectic solvent for the production of chitin nanofibers.

    PubMed

    Mukesh, Chandrakant; Mondal, Dibyendu; Sharma, Mukesh; Prasad, Kamalesh

    2014-03-15

    Deep eutectic solvents (DESs) consisting of the mixtures of choline halide (chloride/bromide)-urea and choline chloride-thiourea were used as solvents to prepare α-chitin nanofibers (CNFs). CNFs of diameter 20-30 nm could be obtained using the DESs comprising of the mixture of choline chloride and thiourea (CCT 1:2); however, NFs could not be obtained using the DESs having urea (CCU 1:2) as hydrogen bond donor. The physicochemical properties of thus obtained NFs were compared with those obtained using a couple of imidazolium based ionic liquids namely, 1-butyl-3-methylimidazolium hydrogen sulphate [(Bmim)HSO4] and 1-methylimidazolium hydrogen sulphate [(Hmim)HSO4] as well as choline based bio-ILs namely, choline hydrogen sulphate [(Chol)HSO4] and choline acrylate. The CNFs obtained using the DES as a solvent were used to prepare calcium alginate bio-nanocomposite gel beads having enhanced elasticity in comparison to Ca-alginate beads. The bio-nanocomposite gel beads thus obtained were used to study slow release of 5-fluorouracil, an anticancer drug.

  1. Facile synthesis of nitrogen and sulfur codoped carbon from ionic liquid as metal-free catalyst for oxygen reduction reaction.

    PubMed

    She, Yiyi; Lu, Zhouguang; Ni, Meng; Li, Li; Leung, Michael K H

    2015-04-08

    Developing metal-free catalysts for oxygen reduction reaction (ORR) is a great challenge in the development of fuel cells. Nitrogen and sulfur codoped carbon with remarkably high nitrogen content up to 13.00 at % was successfully fabricated by pyrolysis of homogeneous mixture of exfoliated graphitic flakes and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bimi][Tf2N]). The exfoliated graphite flakes served as a structure-directing substance as well as additional carbon source in the fabrication. It was demonstrated that the use of graphite flakes increased the nitrogen doping level, optimized the composition of active nitrogen configurations, and enlarged the specific surface area of the catalysts. Electrochemical characterizations revealed that the N and S codoped carbon fabricated by this method exhibited superior catalytic activities toward ORR under both acidic and alkaline conditions. Particularly in alkaline solution, the current catalyst compared favorably to the conventional 20 wt % Pt/C catalyst via four-electron transfer pathway with better ORR selectivity. The excellent catalytic activity was mainly ascribed to high nitrogen doping content, appropriate constitution of active nitrogen configurations, large specific surface area, and synergistic effect of N and S codoping.

  2. Preconcentration and determination of lead and cadmium levels in blood samples of adolescent workers consuming smokeless tobacco products in Pakistan.

    PubMed

    Arain, Sadaf Sadia; Kazi, Tasneem Gul; Afridi, Hassan Imran; Brahman, Kapil Dev; Naeemullah; Khan, Sumaira; Panhwar, Abdul Haleem; Kamboh, Muhammad Afzal; Memon, Jamil R

    2015-05-01

    The present study was aimed to evaluate the cadmium (Cd) and lead (Pb) levels in the blood samples of adolescent boys, chewing different smokeless tobacco (SLT) products in Pakistan. For comparative purpose, boys of the same age group (12-15 years), not consumed any SLT products were selected as referents. To determine trace levels of Cd and Pb in blood samples, a preconcentration method, vortex-assisted liquid-liquid microextraction (VLLME) has been developed, prior to analysis by flame atomic absorption spectrometry. The hydrophobic chelates of Cd and Pb with ammonium pyrrolidinedithiocarbamate were extracted into the fine droplets of ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate, while nonionic surfactant, Triton X-114 was used as a dispersing medium. The main factors affecting the recoveries of Cd and Pb, such as concentration of APDC, centrifugation time, volume of IL and TX-114, were investigated in detail. It was also observed that adolescent boys who consumed different SLT products have 2- to 3-fold higher levels of Cd and Pb in their blood samples as compared to referent boys (p < 0.001).

  3. [Separation and determination of optical isomers of phenylephrine by chiral ligand exchange capillary elcctrophoresis coupling with the promoting effect of ionic liquid].

    PubMed

    Yang, Simei; Zhang, Jiayao; Li, Fei; Hu, Xufang; Cao, Qiue

    2016-01-01

    A method for the separation and determination of optical isomers of phenylephrine was developed based on the promoting effect of non-chiral ionic liquid on chiral ligand-exchange capillary electrophoresis after the electrophoretic parameters were optimized systematically. R-phenylephrine and S-phenylephrine can be separated and determined effectively in 20 mmol/L Tris-H3PO4 buffer solution (pH 5.4) composed of 4.0 mmol/L Cu(II), 8.0 mmol/L L-proline (L-Pro) and 15 mmol/L 1-butyl-3-methylimidazolium chloride ([BMIM] Cl) with the applied voltage of 20 kV, capillary temperature of 25 °C , detection wavelength of 254 nm, and injection of 5 s at 3,447 Pa. The resolution of R- and S-phenylephrines was 1. 42. The linear ranges for the determination of R-phenylephrine and S-phenylephrine were 12. 5 - 150 mg/L and 15. 0-150 mg/L, respectively. The method has been satisfactorily used for the determination of R-phenylephrine and S-phenylephrine in the spiked blood and urine samples. The spiked recoveries in the urine sample were in the range of 93. 7% -108. 2% with the RSDs lower than 3. 18% (n= 3) , and the spiked recoveries in the blood sample were in the range of 91. 4% and 113. 1% with the RSDs lower than 4. 82% (n =3).

  4. Laser desorption from a room temperature ionic liquid

    NASA Astrophysics Data System (ADS)

    Harris, Peter Ronald

    We report laser desorption from a Room Temperature Ionic Liquid (RTIL) as a novel source for time of flight mass spectrometry. We use the 2nd harmonic of an Nd:YAG laser to deposit intensities of 1-50 MW/cm2 via backside illumination onto our RTIL desorption sample. A microstructured metal grid situated on top of a glass microscope slide coated with RTIL serves as our desorption sample. The RTIL we use, 1-Butyl, 3-Methylimidazolium Hexafluorophosphate, remains liquid at pressures below 10-8 torr. The use of liquid desorption sample allows for improved surface conditions, homogeneity and sample life as compared to Matrix Assisted Laser Desorption Ionization (MALDI) techniques. Our desorption technique is also unique as it allows the study of both multiphoton and acoustic desorption processes within the same time of flight spectra. Our technique yields intrinsically high resolution, low noise data. We observe differences between ion species in their preference for desorption by a particular desorption method. Specifically, we observe desorption solely by acoustic means of an entire RTIL molecule adducted with an RTIL cation. Finally, we report the applicability of this technique for the desorption of biomolecules.

  5. Development of biosensor for phenolic compounds containing PPO in β-cyclodextrin modified support and iridium nanoparticles.

    PubMed

    da Silva, Cristiano P; Franzoi, Ana C; Fernandes, Suellen C; Dupont, Jairton; Vieira, Iolanda C

    2013-04-10

    A biosensor based on the iridium nanoparticles dispersed in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (Ir-BMI·PF6) and a celery (Apium graveolens) extract as a source of polyphenol oxidase (PPO) was constructed. A modified support based on β-cyclodextrin (β-CDEP) was used for enzyme immobilization. The behavior of phenolic compounds was investigated by square-wave voltammetry and rutin was selected by presenting the greatest signal. The best performance was obtained with a composition of 70:10:10:10% (w/w/w/w) of the graphite powder:β-CDEP:Nujol:Ir-BMI·PF6 composition, a PPO concentration of 500unitsmL(-1), in 0.1M phosphate buffer solution (pH 6.0) with frequency, pulse amplitude and scan increment at 100Hz, 60mV, and 3.0mV, respectively. Under optimized conditions, the cathodic currents increased linearly for the rutin concentration range of 1.3×10(-7)-2.0×10(-6)M with a detection limit of 7.9×10(-8)M. This sensor demonstrated acceptable repeatability and reproducibility and the results for the rutin recovery ranged from 92.8 to 103.4%. A relative error of 0.7% was obtained in the rutin determination in simulated samples.

  6. Separation and pre-concentration of glucocorticoids in water samples by ionic liquid supported vortex-assisted synergic microextraction and HPLC determination.

    PubMed

    Qin, Hui; Li, Bi; Liu, Mou Sheng; Yang, Ya Ling

    2013-04-01

    We have developed a synergic microextraction procedure based on ionic liquid for the pre-concentration and determination of glucocorticoids in water samples. Using nonionic surfactant Triton X-100 (TX-100) as synergic reagent, 1-butyl-3-methylimidazolium hexa-fluorophosphate accomplished extraction rapidly without heating in water bath. One key property of ionic liquids that highlights their potential is their wide liquid temperature range. The improved extraction was named as ionic liquid supported vortex-assisted synergic microextraction. Compared with the traditional liquid-liquid extraction and cloud point extraction, ionic liquid supported vortex-assisted synergic microextraction was accomplished in 8 min with considerably high recovery. The proposed method greatly improved the sensitivity of HPLC for the determination of glucocorticoids. The results obtained indicated a good linearity with the correlation coefficient of 0.997 over the range of 0.6-300 ng/mL and high sensitivity with LODs of 4.11, 9.19, and 7.50 ng/mL for hydrocortisone butyrate, beclomethasone dipropionate, and nandrolone phenylpropionate, respectively. The RSD of the method was 1.57-1.81% (n = 6) with enrichment factor of 99.85, and good recovery (≥97.24%). The method was successfully applied to the determination of glucocorticoids in mineral water, water of Dianchi lake, and tap water samples.

  7. Temperature-controlled ionic liquid-based ultrasound-assisted microextraction for preconcentration of trace quantity of cadmium and nickel by using organic ligand in artificial saliva extract of smokeless tobacco products

    NASA Astrophysics Data System (ADS)

    Arain, Sadaf Sadia; Kazi, Tasneem Gul; Arain, Asma Jabeen; Afridi, Hassan Imran; Baig, Jameel Ahmed; Brahman, Kapil Dev; Naeemullah; Arain, Salma Aslam

    2015-03-01

    A new approach was developed for the preconcentration of cadmium (Cd) and nickel (Ni) in artificial saliva extract of dry snuff (brown and black) products using temperature-controlled ionic liquid-based ultrasound-assisted dispersive liquid-liquid microextraction (TIL-UDLLμE) followed by electrothermal atomic absorption spectrometry (ETAAS). The Cd and Ni were complexed with ammonium pyrrolidinedithiocarbamate (APDC), extracted in ionic liquid drops, 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6]. The multivariate strategy was applied to estimate the optimum values of experimental variables influence the % recovery of analytes by TIL-UDLLμE method. At optimum experimental conditions, the limit of detection (3s) were 0.05 and 0.14 μg L-1 while relative standard deviations (% RSD) were 3.97 and 3.55 for Cd and Ni respectively. After extraction, the enhancement factors (EF) were 87 and 79 for Cd and Ni, respectively. The RSD for six replicates of 10 μg L-1 Cd and Ni were 3.97% and 3.55% respectively. To validate the proposed method, certified reference material (CRM) of Virginia tobacco leaves was analyzed, and the determined values of Cd and Ni were in good agreement with the certified values. The concentration of Cd and Ni in artificial saliva extracts corresponds to 39-52% and 21-32%, respectively, of the total contents of both elements in dry brown and black snuff products.

  8. Catalysis of rice straw hydrolysis by the combination of immobilized cellulase from Aspergillus niger on β-cyclodextrin-Fe3O4 nanoparticles and ionic liquid.

    PubMed

    Huang, Po-Jung; Chang, Ken-Lin; Hsieh, Jung-Feng; Chen, Shui-Tein

    2015-01-01

    Cellulase from Aspergillus niger was immobilized onto β-cyclodextrin-conjugated magnetic particles by silanization and reductive amidation. The immobilized cellulase gained supermagnetism due to the magnetic nanoparticles. Ninety percent of cellulase was immobilized, but the activity of immobilized cellulase decreased by 10%. In this study, ionic liquid (1-butyl-3-methylimidazolium chloride) was introduced into the hydrolytic process because the original reaction was a solid-solid reaction. The activity of immobilized cellulase was improved from 54.87 to 59.11 U g immobilized cellulase(-1) at an ionic liquid concentration of 200 mM. Using immobilized cellulase and ionic liquid in the hydrolysis of rice straw, the initial reaction rate was increased from 1.629 to 2.739 g h(-1) L(-1). One of the advantages of immobilized cellulase is high reusability--it was usable for a total of 16 times in this study. Compared with free cellulase, magnetized cellulase can be recycled by magnetic field and the activity of immobilized cellulase was shown to remain at 85% of free cellulase without denaturation under a high concentration of glucose (15 g L(-1)). Therefore, immobilized cellulase can hydrolyze rice straw continuously compared with free cellulase. The amount of harvested glucose can be up to twentyfold higher than that from the hydrolysis by free cellulase.

  9. Enhancement in ionic liquid tolerance of cellulase immobilized on PEGylated graphene oxide nanosheets: Application in saccharification of lignocellulose.

    PubMed

    Xu, Jiaxing; Sheng, Zhenhuan; Wang, Xinfeng; Liu, Xiaoyan; Xia, Jun; Xiong, Peng; He, Bingfang

    2016-01-01

    The objective of the present work was to improve ionic liquid (IL) tolerance of cellulase based on the exploration of functional nanoscale carriers for potential application in lignocellulosic biorefinery. PEGylated graphene oxide (GO) composite was successfully fabricated by chemical binding of 4-arm-PEG-NH2 and GO and applied to the immobilization of cellulase. The PEGylated GO-Cellulase retained 61% of the initial activity in 25% (w/v) 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) while free cellulase only retained 2%. The IL stability was enhanced more than 30 times. The relatively minor change in Km value (from 2.7 to 3.2mgmL(-1)) after the immobilization suggested that PEGylated GO-Cellulase was capable of closely mimicking the performance of free enzyme. After treating rice straw with [Bmim][Cl] and dilution to a final IL concentration of 15% (w/v), the slurry was directly hydrolyzed using PEGylated GO-Cellulase without IL removing and a high hydrolysis rate of 87% was achieved.

  10. Collagen/cellulose hydrogel beads reconstituted from ionic liquid solution for Cu(II) adsorption.

    PubMed

    Wang, Jilei; Wei, Ligang; Ma, Yingchong; Li, Kunlan; Li, Minghui; Yu, Yachen; Wang, Lei; Qiu, Huihui

    2013-10-15

    A novel adsorbent, biodegradable collagen/cellulose hydrogel beads (CCHBs), was prepared by reconstitution from a 1-butyl, 3-methylimidazolium chloride ([C4mim]Cl) solution. The adsorption properties of the CCHBs for Cu(II) ion removal from aqueous solutions were investigated and compared with those of cellulose hydrogel beads (CHBs). The CCHBs have a three-dimensional macroporous structure whose amino groups are believed to be the main active binding sites of Cu(II) ions. The equilibrium adsorption capacity (qe) of the CCHBs is greatly influenced by the collagen/cellulose mass ratio, and steeply increases until the collagen/cellulose mass ratio exceeds 2/1. The maximum adsorption is obtained at pH 6. The qe of Cu(II) ions increases with increased initial concentration of the solution. Based on Langmuir isotherms, the maximum adsorption capacity (qm) of CCHB3 (collagen/cellulose mass ratio of 3/1) is 1.06 mmol/g. The CCHBs maintain good adsorption properties after the fourth cycle of adsorption-desorption.

  11. Development and optimization of a naphthoic acid-based ionic liquid as a "non-organic solvent microextraction" for the determination of tetracycline antibiotics in milk and chicken eggs.

    PubMed

    Gao, Jiajia; Wang, Hui; Qu, Jingang; Wang, Huili; Wang, Xuedong

    2017-01-15

    In traditional ionic liquids (ILs)-based microextraction, ILs are often used as extraction and dispersive solvents; however, their functional effects are not fully utilized. Herein, we developed a novel ionic liquid 1-butyl-3-methylimidazolium naphthoic acid salt ([C4MIM][NPA]) with strong acidity. It was used as a mixed dispersive solvent with conventional [C2MIM][BF4] in "functionalized ionic liquid-based non-organic solvent microextraction (FIL-NOSM)" for determination of tetracycline antibiotics (TCs) in milk and eggs. Utilization of [C4MIM][NPA] in FIL-NOSM method increased extraction recoveries (ERs) of TCs by more than 20% and eliminated the pH adjustment step because of its strong acidity. Under optimized conditions based on central composite design, the ERs of four TCs were 94.1-102.1%, and the limitsofdetection were 0.08-1.12μgkg(-1) in milk and egg samples. This proposed method provides high extraction efficiency, less pretreatment time and requires non-organic solvents for determination of trace TC concentrations in complex animal-based food matrices.

  12. (R)-PAC biosynthesis in [BMIM][PF₆]/aqueous biphasic system using Saccharomyces cerevisiae BY4741 cells.

    PubMed

    Kandar, Smita; Suresh, A K; Noronha, Santosh B

    2015-02-01

    (R)-phenylacetylcarbinol or (R)-PAC is a pharmaceutical precursor of (1R, 2S) ephedrine and (1S, 2S) pseudoephedrine. Biotransformation of benzaldehyde and glucose by pyruvate decarboxylase produces (R)-PAC. This biotransformation suffers from toxicity of the substrate, product [(R)-PAC] and by-product (benzyl alcohol). In the present study, ionic liquid/aqueous biphasic system was employed to enhance (R)-PAC production. Fermented broth was the reaction medium in which Saccharomyces cerevisiae BY4741 was the source of pyruvate decarboxylase. Hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) was the non-aqueous phase in which toxic compounds reside. Biocompatibility of [BMIM][PF6] and adequate distribution coefficients of benzaldehyde, (R)-PAC and benzyl alcohol were determined. A Box-Behnken design and response surface methodology were used for the optimization of biotransformation variables in order to maximize (R)-PAC yield and productivity. The results showed higher (R)-PAC yield and productivity of ∼1.5-fold each in the biphasic biotransformation of phase volume ratio 0.05 as compared to the monophasic (conventional) biotransformation. Moreover, the level of major by-product benzyl alcohol was also 3.5-fold lower in biphasic biotransformation. [BMIM][PF6]/aqueous biphasic system is a new approach which could intensify the (R)-PAC production.

  13. Studies on structural, thermal and AC conductivity scaling of PEO-LiPF6 polymer electrolyte with added ionic liquid [BMIMPF6

    NASA Astrophysics Data System (ADS)

    Chaurasia, S. K.; Saroj, A. L.; Shalu, Singh, V. K.; Tripathi, A. K.; Gupta, A. K.; Verma, Y. L.; Singh, R. K.

    2015-07-01

    Preparation and characterization of polymer electrolyte films of PEO+10wt.% LiPF6 + xwt.% BMIMPF6 (1-butyl-3-methylimidazolium hexafluorophosphate) containing dopant salt lithium hexafluorophosphate (LiPF6) and ionic liquid (BMIMPF6) having common anion PF6 - are reported. The ionic conductivity of the polymer electrolyte films has been found to increase with increasing concentration of BMIMPF6 in PEO+10 wt.% LiPF6 due to the plasticization effect of ionic liquid. DSC and XRD results show that the crystallinity of polymer electrolyte decreases with BMIMPF6 concentration which, in turn, is responsible for the increase in ionic conductivity. FTIR spectroscopic study shows the complexation of salt and/or ionic liquid cations with the polymer backbone. Ion dynamics behavior of PEO+LiPF6 as well as PEO+LiPF6 + BMIMPF6 polymer electrolytes was studied by frequency dependent conductivity, σ(f) measurements. The values σ(f) at various temperatures have been analyzed in terms of Jonscher power law (JPL) and scaled with respect to frequency which shows universal power law characteristics at all temperatures.

  14. A novel impedimetric nanobiosensor for low level determination of hydrogen peroxide based on biocatalysis of catalase.

    PubMed

    Shamsipur, Mojtaba; Asgari, Mehdi; Maragheh, Mohammad Ghannadi; Moosavi-Movahedi, Ali Akbar

    2012-02-01

    A robust and effective nanocomposite film-glassy carbon modified electrode based on multi-walled carbon nanotubes and a room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate was prepared by a layer-by-layer self-assembly method. The fabricated modified electrode was used as a novel impedimetric catalase nanobiosensor for the determination of H(2)O(2). Direct electron transfer and electrocatalysis of catalase were fully investigated. The results suggested that catalase could be firmly adsorbed at the modified electrode. A pair of quasi-reversible redox peaks of catalase was observed in a 0.20 M degassed phosphate buffer solution of pH 7.0. The nanocomposite film showed a pronounced increase in direct electron transfer between catalase and the electrode. The immobilized catalase exhibited an excellent electrocatalytic activity towards the reduction of H(2)O(2). The electrochemical impedance spectroscopy measurements revealed that the charge transfer resistance decreases significantly after enzymatic reaction with hydrogen peroxide, so that the prepared modified electrode can be used for the detection of ultra traces of H(2)O(2) (5-1700 nM).

  15. Topochemical pretreatment of wood biomass to enhance enzymatic hydrolysis of polysaccharides to sugars.

    PubMed

    Mou, Hong-Yan; Orblin, Elina; Kruus, Kristiina; Fardim, Pedro

    2013-08-01

    The surface chemistry of milled birch and pine wood pretreated by ionic liquid, hydrothermal and hydrotropic methods, followed by enzymatic hydrolysis was studied in this work. Surface coverage by lignin was measured by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to describe the surface chemical composition after pretreatment in detail, and the morphology after pretreatment was investigated by FE-SEM. Ionic liquid (1-ethyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium chloride) pretreatment at room temperature made the samples swell but did not dissolve the wood. Comparing the surface coverage by lignin, both in the case of birch and pine wood, hydrotropic worked best to remove the lignin hampering enzymatic hydrolysis. ToF-SIMS supported this finding, and showed that in birch, the carbohydrates were degraded more than in pine after hydrotropic pretreatment. The glucose yield of birch was improved by hydrotropic pretreatment from 5.1% to 83.9%, more significantly than in case of pine.

  16. Improvement of the BiOI photocatalytic activity optimizing the solvothermal synthesis

    NASA Astrophysics Data System (ADS)

    Mera, Adriana C.; Moreno, Yanko; Contreras, David; Escalona, Nestor; Meléndrez, Manuel F.; Mangalaraja, Ramalinga Viswanathan; Mansilla, Héctor D.

    2017-01-01

    BiOI nanostructured microspheres were obtained from the solvothermal synthesis route in the presence of ethylene glycol and KI as solvent and source of iodide, respectively. Optimal conditions for the synthesis were obtained by using multivariate analysis and choosing the photocatalytic oxidation rate constant of 3,4,5-trihydroxybenzoic acid (gallic acid) as response factor under simulated solar radiation. Response surface methodology (RSM) was used to determine the optimum values of the reaction time and temperature which were 18 h and 126 °C, respectively, to obtain the most active catalyst. In addition, BiOI synthesis using ionic liquid 1-butyl-3-methylimidazolium iodide ([bmim]I) as iodide source was also carried out for the comparison of microstructure and its photocatalytic efficiency. The obtained BiOI nanostructures were characterized by scanning electron microscopy (SEM) attached with energy dispersive spectrometer (EDS), nitrogen adsorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetry (TG), Fourier transform infrared (FTIR) spectrometry, diffuse reflectance spectroscopy (DRS) and cyclic voltammetry (CV) analyses for their changes in morphological and structural behaviors. It was observed that the synthesis temperature of BiOI nanostructures strongly influenced the morphology, crystalline phase, surface area and electrochemical behavior, and thus affecting the photocatalytic efficiency. The higher photocatalytic removal of gallic acid (60%) was reached within 30 min of irradiation with UV-A on microspheres obtained with ionic liquid. The (1 1 0) crystal phase of BiOI influenced the photocatalytic efficiency.

  17. Combined effects of raw materials and solvent systems on the preparation and properties of regenerated cellulose fibers.

    PubMed

    Chen, Jinghuan; Guan, Ying; Wang, Kun; Zhang, Xueming; Xu, Feng; Sun, Runcang

    2015-09-05

    To investigate the combined effects of materials and solvents on the preparation, structural and mechanical properties of regenerated cellulose fibers, four cellulosic materials (microcrystalline cellulose, cotton linter pulp, bamboo pulp and bleached softwood sulfite dissolving pulp) and six non-derivative solvents (NaOH/urea aqueous solution, N,N-dimethylacetamide/lithium chloride, N-methyl-morpholine-N-oxide, 1-butyl-3-methylimidazolium chloride, 1-allyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate) were used to prepare fibers with wet spinning method. The results showed that the dissolvability of solvent was the determining factor in cellulose dissolution, and the dissolving time was influenced by the raw materials' properties, such as molecular weight, exposed area and hemicellulose content. The crystallinity and elongation at break of the fibers were almost fixed and not affected by the materials and solvents. However, the tensile strength of the fibers was directly proportional to the molecular weight of the raw materials, and varied with the type of solvents through cellulose degradation.

  18. Genotoxicity, mutagenicity and cytotoxicity of carotenoids extracted from ionic liquid in multiples organs of Wistar rats.

    PubMed

    Larangeira, Paula Martins; de Rosso, Veridiana Vera; da Silva, Victor Hugo Pereira; de Moura, Carolina Foot Gomes; Ribeiro, Daniel Araki

    2016-11-01

    The ionic liquid or melted salt 1-Butyl-3-methylimidazolium is an alternative process to extract natural pigments, such as carotenoids. Lycopene represents 80-90% of total of carotenoids presents in tomatoes and it has been widely studied due its potent antioxidant action. The aim of this study was to evaluate genotoxicity, mutagenicity and cytotoxicity of carotenoids extracted from ionic liquid using experimental model in vivo. For this purpose, a total of 20 male Wistar rats were distributed into four groups (n=5), as follows: control group; received a corresponding amount of corn oil for 7days by intragastric gavage (i.g.), ionic liquid group, received 10mgkg(-1) body weight for 7days by gavage; 10mg carotenoids group, received 10mgkg(-1) bw dissolved in corn oil for 7days by gavage and 500mg carotenoids group, received 500mgkg(-1) bw dissolved in corn oil for 7days by gavage. Rat liver treated with ionic liquid exhibited moderate histopathological changes randomly distributed in the parenchyma, such as cytoplasmic eosinophilia, apoptotic bodies, inflammatory infiltrate and focal necrosis. DNA damage was found in peripheral blood and liver cells of rats treated with ionic liquid or carotenoids at 500mg. An increase of micronucleated cells and 8-OhDG immunopositive cells were also detected in rats treated with carotenoids at 500mg. In summary, our results demonstrate that recommended dose for human daily intake of carotenoids extracted by ionic liquid did not induce genotoxicity, mutagenicity and cytotoxicity in multiple organs of rats.

  19. Understanding positive and negative deviations in polarity of ionic liquid mixtures by pseudo-solvent approach.

    PubMed

    Beniwal, Vijay; Kumar, Anil

    2016-08-24

    Physico-chemical properties of liquid mixtures in general display large deviations from linear behaviour, arising out of complex specific and non-specific intermolecular interactions. The polarity of liquid mixtures displaying large positive and negative deviations can be minimized and linear mixing can be achieved in liquids using a pseudo-solvent methodology. The work described herein is designed to investigate the influence of different physical parameters on the linear pseudo-solvent composition in ionic liquid mixtures. For this purpose, we have determined the deviations from linearity, ΔE values (defined as given by ) for binary mixtures of a variety of ionic liquids, including two molecular solvents, DMSO and formamide. Firstly, the investigations were carried out in three 1-butyl-3-methylimidazolium cation based aprotic ionic liquids and the roles of anionic structure and hydrogen bond acceptor basicities (β values) of the ionic liquids were determined. The influence of the cationic structure, i.e., the hydrogen bond donor acidity (α values) and non-associative nature of the ionic liquids, was determined using C2-methylated analogs, 1-butyl-2,3-dimethylimidazolium cation based ionic liquids. The role of the protic nature of ionic liquids was studied in two protic ionic liquids, viz., 1-methylimidazolium formate and 1-methylimidazolium acetate. The effects of the temperature, pseudo-solvent structure and solvatochromic probe structure on the ΔE values were also explored.

  20. Decomposition of Imidazolium-Based Ionic Liquids in Contact with Lithium Metal.

    PubMed

    Schmitz, Paulo; Jakelski, Rene; Pyschik, Marcelina; Jalkanen, Kirsi; Nowak, Sascha; Winter, Martin; Bieker, Peter

    2017-03-09

    Ionic liquids (ILs) are considered to be suitable electrolyte components for lithium-metal batteries. Imidazolium cation based ILs were previously found to be applicable for battery systems with a lithium-metal negative electrode. However, herein it is shown that, in contrast to the well-known IL N-butyl-N-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide ([Pyr14 ][TFSI]), 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C2MIm][TFSI]) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C4MIm][TFSI]) are chemically unstable versus metallic lithium. A lithium-metal sheet was immersed in pure imidazolium-based IL samples and aged at 60 °C for 28 days. Afterwards, the aged IL samples were investigated to deduce possible decomposition products of the imidazolium cation. The chemical instability of the ILs in contact with lithium metal and a possible decomposition starting point are shown for the first time. Furthermore, the investigated imidazolium-based ILs can be utilized for lithium-metal batteries through the addition of the solid-electrolyte interphase (SEI) film-forming additive fluoroethylene carbonate.

  1. Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules

    NASA Astrophysics Data System (ADS)

    Su, Jielong; Raghuwanshi, Vikram S.; Raverty, Warwick; Garvey, Christopher J.; Holden, Peter J.; Gillon, Marie; Holt, Stephen A.; Tabor, Rico; Batchelor, Warren; Garnier, Gil

    2016-10-01

    Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR.

  2. Liquid-liquid extraction of Pu(IV), U(VI) and Am(III) using malonamide in room temperature ionic liquid as diluent.

    PubMed

    Rout, Alok; Venkatesan, K A; Srinivasan, T G; Vasudeva Rao, P R

    2012-06-30

    The extraction behavior of U(VI), Pu(IV) and Am(III) from nitric acid medium by a solution of N,N-dimethyl-N,N-dioctyl-2-(2-hexyloxyethyl)malonamide (DMDOHEMA) in the room temperature ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (C(4)mimNTf(2)), was studied. The distribution ratio of these actinides in DMDOHEMA/C(4)mimNTf(2) was measured as a function of various parameters such as the concentration of nitric acid, DMDOHEMA, NTf(2)(-), alkyl chain length of ionic liquid. The extraction of actinides in the absence of DMDOHEMA was insignificant and the distribution ratio achieved in conjunction with C(4)mimNTf(2), was remarkable. The separation factor of U(VI) and Pu(IV) achieved with the use of DMDOHEMA, ionic liquid was compared with Am(III) and other fission products. The stoichiometry of the metal-solvate was determined to be 1:2 for U(VI) and Pu(IV) and 1:3 for Am(III).

  3. Multi-podant diglycolamides and room temperature ionic liquid impregnated resins: An excellent combination for extraction chromatography of actinides.

    PubMed

    Gujar, R B; Ansari, S A; Verboom, W; Mohapatra, P K

    2016-05-27

    Extraction chromatography resins, prepared by impregnating two multi-podant diglycolamide ligands, viz. diglycolamide-functionalized calix[4]arene (C4DGA) and tripodal diglycolamide (T-DGA) dissolved in the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide (RTIL: C4mimTf2N) on Chromosorb-W (an inert solid support), gave excellent results for the removal of trivalent actinides from acidic waste solutions. Distribution coefficient measurements on several metal ions showed selective sorption of Am(III) over hexavalent uranyl ions and other fission product elements such as strontium and cesium. The sorbed metal ions could be efficiently desorbed with a complexing solution containing guanidine carbonate and EDTA buffer. The sorption of Am(III) on both resins followed pseudo-second order rate kinetics with rate constants of 1.37×10(-6) and 6.88×10(-7)g/cpmmin for T-DGA and C4DGA resins, respectively. The metal sorption on both resins indicated the Langmuir monolayer chemisorption phenomenon with Eu(III) sorption capacities of 4.83±0.21 and 0.52±0.05mg per g of T-DGA and C4DGA resins, respectively. The results of column studies show that these resins are of interest for a possible application for the recovery of hazardous trivalent actinides from dilute aqueous solutions.

  4. Insights into the mechanism of extraction of uranium (VI) from nitric acid solution into an ionic liquid by using tri-n-butyl phosphate.

    PubMed

    Gaillard, Dr Clotilde; Boltoeva, Maria; Billard, Isabelle; Georg, Sylvia; Mazan, Valérie; Ouadi, Ali; Ternova, Dariia; Hennig, Christoph

    2015-08-24

    We present new results on the liquid-liquid extraction of uranium (VI) from a nitric acid aqueous phase into a tri-n-butyl phosphate/1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (TBP/[C4 mim][Tf2 N]) phase. The individual solubilities of the ionic-liquid ions in the upper part of the biphasic system are measured over the whole acidic range and as a function of the TBP concentration. New insights into the extraction mechanism are obtained through the in situ characterization of the extracted uranyl complexes by coupling UV/Vis and extended X-ray absorption fine structure (EXAFS) spectroscopy. We propose a chemical model to explain uranium (VI) extraction that describes the data through a fit of the uranyl distribution ratio DU . In this model, at low acid concentrations uranium (VI) is extracted as the cationic complex [UO2 (TBP)2 ](2+) , by an exchange with one proton and one C4 mim(+) . At high acid concentrations, the extraction proceeds through a cationic exchange between [UO2 (NO3 )(HNO3 )(TBP)2 ](+) and one C4 mim(+) . As a consequence of this mechanism, the variation of DU as a function of TBP concentration depends on the C4 mim(+) concentration in the aqueous phase. This explains why noninteger values are often derived by analysis of DU versus [TBP] plots to determine the number of TBP molecules involved in the extraction of uranyl in an ionic-liquid phase.

  5. Direct UV-spectroscopic measurement of selected ionic-liquid vapors

    SciTech Connect

    Dai, Sheng; Luo, Huimin; Wang, Congmin; Li, Haoran

    2010-01-01

    The hallmark of ionic liquids lies in their negligible vapor pressure. This ultralow vapor pressure makes it difficult to conduct the direct spectroscopic measurement of ionic-liquid vapors. In fact, there have been no electronic spectroscopic data currently available for ionic-liquid vapors. This deficiency significantly hampers the fundamental understanding of the unique molecular structures of ionic liquids. Herein, the UV absorption spectra of eight ionic liquids, such as 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bmim{sup +}] [Tf{sub 2}N{sup -}]) and 1-ethyl-3-methylimidazolium bis(perfluoroethylsulfonyl)imide ([Emim{sup +}][beti{sup -}]) in the vapor phase in a distillation-like environment, were measured through a high-temperature spectroscopic technique to fill this knowledge gap. Two strong absorption peaks of the [Bmim{sup +}][Tf{sub 2}N{sup -}] vapor lie at 202 and 211 nm, slightly different from those of the neat [Bmim{sup +}][Tf{sub 2}N{sup -}] thin film and its solution in water. Based on the quantitative determination of the vapor absorption spectra as a function of temperature, the vaporization enthalpies of these ionic liquids vapors were measured and found to be in good agreement with the corresponding literature values. This in situ method opens up a new avenue to study the nature of ionic-liquid vapors and to determine the vaporization enthalpies of ionic liquids.

  6. Development of a high speed counter-current chromatography system with Cu(II)-chiral ionic liquid complexes and hydroxypropyl-β-cyclodextrin as dual chiral selectors for enantioseparation of naringenin.

    PubMed

    Wang, Shanshan; Han, Chao; Wang, Sisi; Bai, Lijuan; Li, Shanshan; Luo, Jianguang; Kong, Lingyi

    2016-11-04

    Cu(II) complexed amino acid ionic liquid, Cu(II)-[1-butyl-3-methylimidazolium][L-Pro] (Cu(II)-[BMIm][L-Pro]), was successfully adopted as chiral ligand to improve the enantioseparation efficiency in high speed counter-current chromatography (HSCCC). For the enantioseparation of intractable naringenin (NRG) racemic mixtures, Cu(II)-[BMIm][L-Pro] coupled with hydroxypropyl-β-cyclodextrin (HP-β-CD) was successfully applied as dual chiral selectors in HSCCC. The influence of important parameters, including the concentration of the chiral selectors, the pH value, and the temperature were investigated. Under optimal conditions, 4.5mg of (+)-NRG and 4.1mg of (-)-NRG were successfully separated from 10mg NRG racemic mixtures with the purity of 98%. The chiral recognition mechanism of dual chiral selectors was illuminated by the UV-vis and NMR spectra, suggesting that the enantioseparation was upon the difference of the thermodynamic stability of the quaternary complexes of Cu(II), [BMIm][L-Pro], HP-β-CD, and NRG. The results illustrated that the developed HSCCC system, based on the synergistic mechanism of Cu(II)-[BMIm][L-Pro] and HP-β-CD, exhibited better performance on enantioseparation and had great application potential in preparative chiral separation of natural products.

  7. Magnetic stirrer induced dispersive ionic-liquid microextraction for the determination of vanadium in water and food samples prior to graphite furnace atomic absorption spectrometry.

    PubMed

    Naeemullah; Kazi, Tasneem Gul; Tuzen, Mustafa

    2015-04-01

    A new dispersive liquid-liquid microextraction, magnetic stirrer induced dispersive ionic-liquid microextraction (MS-IL-DLLME) was developed to quantify the trace level of vanadium in real water and food samples by graphite furnace atomic absorption spectrometry (GFAAS). In this extraction method magnetic stirrer was applied to obtained a dispersive medium of 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6] in aqueous solution of (real water samples and digested food samples) to increase phase transfer ratio, which significantly enhance the recovery of vanadium - 4-(2-pyridylazo) resorcinol (PAR) chelate. Variables having vital role on desired microextraction methods were optimised to obtain the maximum recovery of study analyte. Under the optimised experimental variables, enhancement factor (EF) and limit of detection (LOD) were achieved to be 125 and 18 ng L(-1), respectively. Validity and accuracy of the desired method was checked by analysis of certified reference materials (SLRS-4 Riverine water and NIST SRM 1515 Apple leaves). The relative standard deviation (RSD) for 10 replicate determinations at 0.5 μg L(-1) of vanadium level was found to be <5.0%. This method was successfully applied to real water and acid digested food samples.

  8. Ionic liquid-based extraction followed by graphite-furnace atomic absorption spectrometry for the determination of trace heavy metals in high-purity iron metal.

    PubMed

    Matsumiya, Hiroaki; Kato, Tatsuya; Hiraide, Masataka

    2014-02-01

    The analysis of high-purity materials for trace impurities is an important and challenging task. The present paper describes a facile and sensitive method for the determination of trace heavy metals in high-purity iron metal. Trace heavy metals in an iron sample solution were rapidly and selectively preconcentrated by the extraction into a tiny volume of an ionic liquid [1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide] for the determination by graphite-furnace atomic absorption spectrometry (GFAAS). A nitrogen-donating neutral ligand, 2,4,6-tris(2-pyridyl)-1,3,5-triazine (TPTZ), was found to be effective in the ionic liquid-based selective extraction, allowing the nearly complete (~99.8%) elimination of the iron matrix. The combination with the optimized GFAAS was successful. The detectability reached sub-μg g(-1) levels in iron metal. The novel use of TPTZ in ionic liquid-based extraction followed by GFAAS was successfully applied to the determination of traces of Co, Ni, Cu, Cd, and Pb in certified reference materials for high-purity iron metal.

  9. Development of a new green non-dispersive ionic liquid microextraction method in a narrow glass column for determination of cadmium prior to couple with graphite furnace atomic absorption spectrometry.

    PubMed

    Naeemullah; Kazi, Tasneem Gul; Tuzen, Mustafa; Shah, Faheem; Afridi, Hassan Imran; Citak, Demirhan

    2014-02-17

    Easy and innovative non-dispersive ionic liquid based microextraction (NDILME) has been developed for preconcentration of trace level of cadmium (Cd) in aqueous real surface water samples prior to couple with graphite furnace atomic absorption spectrometry (GFAAS). A 200 cm long narrow glass column containing aqueous solution of standard/sample was used to increase phase transfer ratio by providing more contact area between two medium (aqueous and extractive), which drastically improve the recoveries of labile hydrophobic chelate of Cd ammonium pyrrolidinedithiocarbamate (APDC), into ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate [C4mim][PF6]. Different aspect of the desire method have been investigated and optimized. Under the optimized key experimental variables, limit of detection (LOD) and enhancement factor (EF) were achieved to be 0.5 ng L(-1) and 150, respectively. Reliability of the model method was checked by relative standard deviation (%RSD), which was found to be <5%. Validity and accuracy of the developed method was checked by analysis of certified reference water samples (SLRS-4 Riverine water) using standard addition method. Application of the model method was productively performed by analysis of Cd in real surface water samples (tap and sea).

  10. Effect of morphology of mesoporous silica on characterization of protic ionic liquid-based composite membranes

    NASA Astrophysics Data System (ADS)

    Ye, Yun-Sheng; Liang, Gao-Wei; Chen, Bo-Han; Shen, Wei-Chung; Tseng, Chi-Yung; Cheng, Ming-Yao; Rick, John; Huang, Yao-Jheng; Chang, Feng-Chih; Hwang, Bing-Joe

    Effects caused by the morphology of mesoporous silica on the characterization of protic ionic liquid-based composite membranes for anhydrous proton exchange membrane applications are investigated. Two types of SBA15 materials with platelet and fiberlike morphologies are synthesized and incorporated into a mixture of polymerizable monomers together with an ionic liquid (IL) [1-butyl-3-methylimidazolium bis(trifluoromethane sulfone)imide (BMIm-TFSI)] to form new conducting membranes using an in situ photo crosslinking process. Incorporation of a defined amount of fiber-shaped SBA 15 and platelet 15 significantly increases the ionic conductivity to between two and three times that of a plain poly(methyl methacrylate) (PMMA)/IL membrane (2.3 mS cm -1) at 160 °C. The protic ionic liquid (PIL) retention ability of the membranes is increased by the capillary forces introduced by the mesoporous silica materials, while ionic conductivity loss after leaching test is retarded. The highest ionic conductivity (5.3 mS cm -1) is obtained by incorporating 5 wt% of P-SBA 15 in the membrane to about six times that of plain PMMA/IL membrane (0.9 mS cm -1) at 160 °C after leaching test.

  11. Synthesis, micellization behavior and alcohol induced amphipathic cellulose film of cellulose-based amphiphilic surfactant

    NASA Astrophysics Data System (ADS)

    Yang, Fang; Liu, Ya-nan; Yu, Jian-ling; Li, Hai-peng; Li, Gang

    2015-08-01

    This paper presented a novel preparation method of the cellulose-based amphiphilic surfactant, and the surfactant was used to prepare amphipathic cellulose membrane. The native cotton cellulose was tailored to cellulose segments in ionic liquid 1-butyl-3-methylimidazolium chloride. Then, the hydrophobic and hydrophilic modification of cellulose segments were carried out by esterification and graft polymerization of the ɛ-caprolactone (ɛ-CL) monomer onto the hydroxyl group of cellulose as well as sulphonation with sulfamic acid. The amphipathic cellulose membrane was made by cellulose-based amphiphilic surfactant cross-linking with glutaraldehyde. The molecular structure of amphipathic cellulose surfactant was confirmed by FT-IR, and its surface active properties were investigated by Wilhelmy plate method and Steady-state fluorescence probe method, respectively. Experimental results showed that cellulose-based amphiphilic surfactant caused low interfacial tension of 48.62 mN/m and its critical micelle concentration (cmc) value was 0.65 wt% when the grafting ratio of cellulose-g-PCL (poly-caprolactone) was 25.40%. The contact angle between a droplet of water and the surface of membrane was 90.84o, and the surface free energy of the alcohol induced cellulose membrane was 15.7 mJ/m2. This study may help increase using natural and biodegradable surface-activity materials with improved properties as surfactants.

  12. Development of an ionic liquid-based microwave-assisted method for simultaneous extraction and distillation for determination of proanthocyanidins and essential oil in Cortex cinnamomi.

    PubMed

    Liu, Ye; Yang, Lei; Zu, Yuangang; Zhao, Chunjian; Zhang, Lin; Zhang, Ying; Zhang, Zhonghua; Wang, Wenjie

    2012-12-15

    Cortex cinnamomi is associated with many health benefits and is used in the food and pharmaceutical industries. In this study, an efficient ionic liquid-based microwave-assisted simultaneous extraction and distillation (ILMSED) technique was used to extract cassia oil and proanthocyanidins from Cortex cinnamomi; these were quantified by gas chromatography/mass spectrometry (GC-MS) and the vanillin-HCl colorimetric method, respectively. 0.5M 1-butyl-3-methylimidazolium bromide ionic liquid was selected as solvent. The optimum parameters of dealing with 20.0 g sample were 230 W microwave irradiation power, 15 min microwave extraction time and 10 liquid-solid ratio. The yields of essential oil and proanthocyanidins were 1.24 ± 0.04% and 4.58 ± 0.21% under the optimum conditions. The composition of the essential oil was analysed by GC-MS. Using the ILMSED method, the energy consumption was reduced and the extraction yields were improved. The proposed method was validated using stability, repeatability, and recovery experiments. The results indicated that the developed ILMSED method provided a good alternative for the extraction of both the essential oil and proanthocyanidins from Cortex cinnamomi.

  13. Highly Luminescent Salts Containing Well-Shielded Lanthanide-Centered Complex Anions and Bulky Imidazolium Countercations

    SciTech Connect

    Tang, Si-Fu; Lorbeer, Chantal; Wang, Xinjiao; Ghosh, Pushpal; Mudring, Anja-Verena

    2014-09-02

    Four salts containing imidazolium cations and europium(III)- or terbium(III)-centered complex anions have been successfully synthesized from an ethanol/H2O solution. The single-crystal X-ray diffraction analyses reveal that these compounds have a common formula of [R][Ln(DETCAP)4] [R = 1-ethyl-3-methylimidazolium (C2mim), Ln = Eu (1) and Tb (2); R = 1-butyl-3-methylimidazolium (C4mim), Ln = Eu (3) and Tb (4); DETCAP = diethyl-2,2,2-trichloroacetylphosphoramidate], in which the lanthanide centers are chelated by four chelating pseudo-β-diketonate ligands (DETCAP)-, forming the respective complex anions. Their thermal behaviors and stabilities were also investigated to study the role of the length of the side chain in the cations. Fluorescence measurements at both room temperature and liquid-nitrogen temperature show that these materials show intense characteristic europium(III) or terbium(III) emissions and have long decay times. Their overall quantum yields were determined to be in the range of 30–49%.

  14. Surface modification using ionic liquid ion beams

    NASA Astrophysics Data System (ADS)

    Takaoka, Gikan H.; Hamaguchi, Takuya; Takeuchi, Mitsuaki; Ryuto, Hiromichi

    2014-12-01

    We developed an ionic liquid (IL) ion source using 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and produced IL ion beams by applying a high electric field between the tip and the extractor. Time-of-flight measurements showed that small cluster and fragment ions were contained in the positive and negative ion beams. The positive and negative cluster ions were deposited on Si(1 0 0) substrates. X-ray photoelectron spectroscopy measurements showed that the composition of the deposited layers was similar to that of an IL solvent. This suggests that a cation (A+) or an anion (B-) was attached to an IL cluster (AB)n, resulting in the formation of positive cluster ions (AB)nA+ or negative cluster ions (AB)nB-, respectively. The surfaces of the IL layers deposited on Si(1 0 0) substrates were flat at an atomic level for positive and negative cluster ion irradiation. Moreover, the contact angles of the deposited layers were similar to that of the IL solvent. Thus, surface modification of Si(1 0 0) substrates was successfully demonstrated with BMIM-PF6 cluster ion beams.

  15. Flow-Tube Investigations of Hypergolic Reactions of a Dicyanamide Ionic Liquid Via Tunable Vacuum Ultraviolet Aerosol Mass Spectrometry.

    PubMed

    Chambreau, Steven D; Koh, Christine J; Popolan-Vaida, Denisia M; Gallegos, Christopher J; Hooper, Justin B; Bedrov, Dmitry; Vaghjiani, Ghanshyam L; Leone, Stephen R

    2016-10-07

    The unusually high heats of vaporization of room-temperature ionic liquids (RTILs) complicate the utilization of thermal evaporation to study ionic liquid reactivity. Although effusion of RTILs into a reaction flow-tube or mass spectrometer is possible, competition between vaporization and thermal decomposition of the RTIL can greatly increase the complexity of the observed reaction products. In order to investigate the reaction kinetics of a hypergolic RTIL, 1-butyl-3-methylimidazolium dicyanamide (BMIM(+)DCA(-)) was aerosolized and reacted with gaseous nitric acid, and the products were monitored via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry at the Chemical Dynamics Beamline 9.0.2 at the Advanced Light Source. Reaction product formation at m/z 42, 43, 44, 67, 85, 126, and higher masses was observed as a function of HNO3 exposure. The identities of the product species were assigned to the masses on the basis of their ionization energies. The observed exposure profile of the m/z 67 signal suggests that the excess gaseous HNO3 initiates rapid reactions near the surface of the RTIL aerosol. Nonreactive molecular dynamics simulations support this observation, suggesting that diffusion within the particle may be a limiting step. The mechanism is consistent with previous reports that nitric acid forms protonated dicyanamide species in the first step of the reaction.

  16. The solvation structures of cellulose microfibrils in ionic liquids

    SciTech Connect

    Mostofian, Barmak; Smith, Jeremy C; Cheng, Xiaolin

    2011-01-01

    The use of ionic liquids for non-derivatized cellulose dissolution promises an alternative method for the thermochemical pretreatment of biomass that may be more efficient and environmentally acceptable than more conventional techniques in aqueous solution. Here, we performed equilibrium MD simulations of a cellulose microfibril in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) and compared the solute structure and the solute-solvent interactions at the interface with those from corresponding simulations in water. The results indicate a higher occurrence of solvent-exposed orientations of cellulose surface hydroxymethyl groups in BmimCl than in water. Moreover, spatial and radial distribution functions indicate that hydrophilic surfaces are a preferred site of interaction between cellulose and the ionic liquid. In particular, hydroxymethyl groups on the hydrophilic fiber surface adopt a different conformation from their counterparts oriented towards the fiber s core. Furthermore, the glucose units with these solvent-oriented hydroxymethyls are surrounded by the heterocyclic organic cation in a preferred parallel orientation, suggesting a direct and distinct interaction scheme between cellulose and BmimCl.

  17. Investigation of the interaction of pepsin with ionic liquids by using fluorescence spectroscopy.

    PubMed

    Fan, Yunchang; Zhang, Sheli; Wang, Qiang; Li, Junhai; Fan, Haotian; Shan, Dongkai

    2013-06-01

    The molecular mechanism of the interaction between pepsin and two typical ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) and 1-octyl-3-methylimidazolium chloride ([C8mim]Cl), was investigated with fluorescence spectroscopy, ultraviolet absorption, and circular dichroism spectroscopy at a pH value of 1.6. The results suggest that ILs could quench the intrinsic fluorescence of pepsin, probably via a dynamic quenching mechanism. The fluorescence quenching constants were determined by employing the classic Stern-Volmer equation. The constant values are very small, indicating that only a very weak interaction between ILs and pepsin exists. The Gibbs free-energy change, enthalpy change (ΔH), and entropy change (ΔS) during the interaction of pepsin and ILs were estimated. Positive values of ΔH and ΔS indicate that the interaction between ILs and pepsin is mainly driven by hydrophobic interaction. Synchronous and three-dimensional fluorescence spectra demonstrate that the addition of ILs (0-0.20 mol L(-1) for each IL) does not bring apparent changes to the microenvironments of tyrosine and tryptophan residues. Activity experiments show that the activity of pepsin is concentration dependent; higher concentrations of ILs (>0.22 mol L(-1) for [C8mim]Cl and >0.30 mol L(-1) for [C4mim]Cl) cause the remarkable reduction of enzyme activity. The presence of ILs also does not improve the thermal stability of pepsin.

  18. Dielectric spectroscopy study on ionic liquid microemulsion composed of water, TX-100, and BmimPF6

    NASA Astrophysics Data System (ADS)

    Chen, Zhen; Nozaki, Ryusuke

    2012-06-01

    We report here a broadband dielectric spectroscopy study on an ionic liquid microemulsion (ILM) composed of water, Triton X-100 (TX-100), and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). It is found that the phase behavior of this ILM can be easily identified by its dielectric response. The dielectric behavior of the ILM in the GHz range is consistent with that of TX-100/water mixtures with comparable water-to-TX-100 weight ratio. It consists of the relaxations due to ethylene oxide (EO) unit relaxation, hydration water dynamics, and/or free water dynamics. The water content dependence of the EO unit relaxation suggests that this relaxation involves dynamics of hydration water molecules. In the IL-in-water microemulsion phase, it is found that bmimPF6 molecules are preferentially dissolved in water when their concentration in water is lower than the solubility. An additional dielectric relaxation that is absent in the TX-100/water mixtures is observed in the frequency range of 107-108 Hz for this ILM. This low-frequency relaxation is found closely related to the bmimPF6 molecule and could be attributed to the hopping of its cations/anions between the anionic/cationic sites.

  19. Evidence of water-in-ionic liquid microemulsion formation by nonionic surfactant Brij-35.

    PubMed

    Rai, Rewa; Pandey, Siddharth

    2014-09-02

    Brij-35, a common and popular nonionic surfactant, is shown to form water-in-ionic liquid (w/IL) microemulsions with IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) as the bulk phase. The presence of w/[bmim][PF6] microemulsions is hinted by the significantly increased solubility of water in Brij-35 solution of [bmim][PF6]. The formation of w/[bmim][PF6] microemulsions by Brij-35 is confirmed using dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) measurements. Brij-35 forms reverse micelle-type aggregates within [bmim][PF6] in the absence of added-water. These reverse micelles become w/[bmim][PF6] microemulsions as the water is added to the system. As the water loading (w0) is increased, the average diameter of the aggregates increases. Fourier transform infrared (FTIR) absorbance data reveal the presence of both "bound" and "free" water within the system. The "bound" water is associated with the water pools of the w/[bmim][PF6] microemulsions. Excited-state proton transfer (ESPT) involving probe pyranine shows deprotonation of pyranine within the water pools of the w/[bmim][PF6] microemulsions.

  20. Shape and size controlled synthesis of MOF nanocrystals with the assistance of ionic liquid mircoemulsions.

    PubMed

    Shang, Wenting; Kang, Xinchen; Ning, Hui; Zhang, Jianling; Zhang, Xiaogang; Wu, Zhonghua; Mo, Guang; Xing, Xueqing; Han, Buxing

    2013-10-29

    In this work, the La-metal-organic frameworks (La-MOFs) were synthesized using lanthanum(III) nitrate and 1,3,5-benzenetricarboxylic acid (BTC) in H2O-in-1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), bmimPF6-in-water, and the bicontinuous microemulsions stabilized by surfactant TX-100. The MOFs prepared were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and FT-IR methods, and the microstructures of the microemulsions in the H2O/bmimPF6/TX-100 system were studied by small-angle X-ray scattering (SXAS) technique. It was shown that the dispersed droplets in the water-in-bmimPF6, bicontinuous and bmimPF6-in-water microemulsions were spherical, lamellar, and cylindrical, respectively. The shapes of the La-MOFs synthesized were similar to that of the droplets in the corresponding microemulsions. This indicated that the morphology of MOFs could be controlled by the microstructures of the microemulsions. On the basis of the systematic experimental results, the mechanism for controlling the morphology of the MOFs was proposed.

  1. Role of the surfactant structure in the behavior of hydrophobic ionic liquids within aqueous micellar solutions.

    PubMed

    Behera, Kamalakanta; Kumar, Vinod; Pandey, Siddharth

    2010-04-06

    The behavior of an ionic liquid (IL) within aqueous micellar solutions is governed by its unique property to act as both an electrolyte and a cosolvent. The influence of the surfactant structure on the properties of aqueous micellar solutions of zwitterionic SB-12, nonionic Brij-35 and TX-100, and anionic sodium dodecyl sulfate (SDS) in the presence of the "hydrophobic" IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) is assessed along with the possibility of forming oil-in-water microemulsions in which the IL acts as the "oil" phase. The solubility of [bmim][PF(6)] within aqueous micellar solutions increases with increasing surfactant concentration. In contrast to anionic SDS, the zwitterionic and nonionic surfactant solutions solubilize more [bmim][PF(6)] at higher concentrations and the average aggregate size remains almost unchanged. The formation of IL-in-water microemulsions when the concentration of [bmim][PF(6)] is above its aqueous solubility is suggested for nonionic Brij-35 and TX-100 aqueous surfactant solutions.

  2. Transport properties of aqueous ionic liquid microemulsions: influence of the anion type and presence of the cosurfactant.

    PubMed

    Piekart, Jakub; Łuczak, Justyna

    2015-12-14

    Transport properties, viz. specific conductivity, dynamic viscosity and apparent diffusion coefficients, were measured as a function of water content in aqueous ionic liquid microemulsions containing 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF6] and bis(trifluoromethanesulphonyl)imide, [BMIM][Tf2N], stabilized by the nonionic surfactant TX-100, or its mixture with a cosurfactant, i.e. butanol. The investigation covered the whole water content range through various (Winsor I-III and dissolved solution) structures of the system. The comparative approach allowed closer inspection into phenomena being on the background of observed transport properties behavior taking into account the influence of the cosurfactant. The addition of butanol offers considerable advantages, such as an increase in conductivity, especially in systems containing ionic liquids with lower conductivity. This is accompanied by a significant decrease in viscosity, even to values that are comparable with those of molecular solvents. Moreover, the reasons for the surprisingly higher conductivity of [BMIM][PF6]-based systems were provided, and the conclusions were supported by cyclic voltammetry as well as spectrophotometric and dynamic light scattering measurements.

  3. Double layer in room temperature ionic liquids: influence of temperature and ionic size on the differential capacitance and electrocapillary curves.

    PubMed

    Costa, Renata; Pereira, Carlos M; Silva, Fernando

    2010-09-28

    Differential capacity-potential curves, C(E), were obtained from electrochemical impedance spectra (12 kHz-2 Hz) for the interfaces between Hg and a series of alkyl imidazolium-based room temperature ionic liquids having the same anion, bis(trifluoromethanesulfonyl) imide: 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [EMIM][Tf(2)N], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [BMIM][Tf(2)N], 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [HMIM][Tf(2)N]. The electrocapillary curves were obtained from drop time measurements and the values of the pzc were calculated. The pzc apparently becomes more negative as the imidazolium alkyl chain length increases. A small effect of the cation is seen on the C(E) curves at negative potentials. The effect of the aromatic nature of the cation is assessed by comparing 1-butyl-1-methylimidazolium bis(trifluoromethanesulfonyl) imide, with 1-butyl-3-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide [BMPyr][Tf(2)N]. The effects of temperature on the capacitance, drop time electrocapillary curve and on the pzc were also obtained. The capacity was found to increase with increasing temperature in the whole range of accessible potentials.

  4. Targeting adequate thermal stability and fire safety in selecting ionic liquid-based electrolytes for energy storage.

    PubMed

    Chancelier, L; Diallo, A O; Santini, C C; Marlair, G; Gutel, T; Mailley, S; Len, C

    2014-02-07

    The energy storage market relating to lithium based systems regularly grows in size and expands in terms of a portfolio of energy and power demanding applications. Thus safety focused research must more than ever accompany related technological breakthroughs regarding performance of cells, resulting in intensive research on the chemistry and materials science to design more reliable batteries. Formulating electrolyte solutions with nonvolatile and hardly flammable ionic liquids instead of actual carbonate mixtures could be safer. However, few definitions of thermal stability of electrolytes based on ionic liquids have been reported in the case of abuse conditions (fire, shortcut, overcharge or overdischarge). This work investigates thermal stability up to combustion of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C1C4Im][NTf2]) and 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([PYR14][NTf2]) ionic liquids, and their corresponding electrolytes containing lithium bis(trifluoromethanesulfonyl)imide LiNTf2. Their possible routes of degradation during thermal abuse testings were investigated by thermodynamic studies under several experimental conditions. Their behaviours under fire were also tested, including the analysis of emitted compounds.

  5. Surface structures of equimolar mixtures of imidazolium-based ionic liquids using high-resolution Rutherford backscattering spectroscopy

    NASA Astrophysics Data System (ADS)

    Nakajima, Kaoru; Oshima, Shinichi; Suzuki, Motofumi; Kimura, Kenji

    2012-11-01

    Surface structures of equimolar mixtures of imidazolium-based ionic liquids (ILs) having a common cation (1-butyl-3-methylimidazolium ([C4MIM]) or 1-hexyl-3-methylimidazolium ([C6MIM])) and different anions (bis(trifluoromethanesulfonyl)imide ([TFSI]), hexafluorophosphate ([PF6]) or chlorine) are studied using high-resolution Rutherford backscattering spectroscopy (HRBS). Both cations and anions have the same preferential orientations at the surface as in the pure ILs. In the mixture, the larger anion is located shallower than the smaller anion. The [TFSI] anion is slightly enriched at the surface relative to [PF6] with coverage of ~ 60% for the equimolar mixtures of [C4(6)MIM] [TFSI] and [C4(6)MIM] [PF6]. No surface segregation is observed for [C6MIM] [TFSI]0.5[Cl]0.5 and [C6MIM] [PF6]0.5[Cl]0.5. These results are different from the recent TOF-SIMS measurement where very strong surface segregation of [TFSI] was concluded for the mixture of [C4MIM] [TFSI] and [C4MIM] [PF6].

  6. A paradoxical method for NAD+/NADH accumulation on an electrode surface using a hydrophobic ionic liquid.

    PubMed

    Masuda, Miyuki; Motoyama, Yusuke; Kuwahara, Jun; Nakamura, Nobuhumi; Ohno, Hiroyuki

    2013-01-15

    In this communication, we describe a novel and facile method for the immobilization of NAD(+)/NADH on an electrode surface using a hydrophobic ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim][Tf(2)N]). By taking advantage of the insolubility of NAD(+)/NADH in hydrophobic ionic liquids, it is expected that NAD(+)/NADH can be retained on the electrode's surface. Alcohol dehydrogenase (ADH) and NAD(+)/NADH were immobilized with a gelatin hydrogel on an electrode that was modified with an electropolymerized ruthenium complex containing 5-amino-1,10-phenanthroline (pAPRu) as a mediator for NADH oxidation. The (ADH, NAD(+))/pAPRu-immobilized electrode exhibited the electrocatalytic oxidation of ethanol in [C4mim][Tf(2)N]. The obtained catalytic current in [C4mim][Tf(2)N] was comparable to that in buffer solution containing NAD(+). It was confirmed by UV-vis spectroscopy that NAD(+) did not dissolve in the [C4mim][Tf(2)N] and was retained on the electrode's surface. Furthermore, we succeeded in constructing an ethanol/O(2) biofuel cell comprised of an (ADH, NAD(+))/pAPRu anode and a bilirubin oxidase cathode using [C4mim][Tf(2)N] as an electrolyte.

  7. Theinfluence of a hierarchical porous carbon network on the coherent dynamics of a nanoconfined room temperature ionic liquid: A neutron spin echo and atomistic simulation investigation

    SciTech Connect

    Banuelos, Jose Leo; Feng, Guang; Fulvio, Pasquale F; Li, Song; Rother, Gernot; Arend, Nikolas; Faraone, Antonio; Dai, Sheng; Cummings, Peter T; Wesolowski, David J

    2014-01-01

    The molecular-scale dynamic properties of the room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, or [C4mim+ ][Tf2N ], confined in hierarchical microporous mesoporous carbon, were investigated using neutron spin echo (NSE) and molecular dynamics (MD) simulations. Both NSE and MD reveal pronounced slowing of the overall collective dynamics, including the presence of an immobilized fraction of RTIL at the pore wall, on the time scales of these approaches. A fraction of the dynamics, corresponding to RTIL inside 0.75 nm micropores located along the mesopore surfaces, are faster than those of RTIL in direct contact with the walls of 5.8 nm and 7.8 nm cylindrical mesopores. This behavior is ascribed to the near-surface confined-ion density fluctuations resulting from the ion ion and ion wall interactions between the micropores and mesopores as well as their confinement geometries. Strong micropore RTIL interactions result in less-coordinated RTIL within the micropores than in the bulk fluid. Increasing temperature from 296 K to 353 K reduces the immobilized RTIL fraction and results in nearly an order of magnitude increase in the RTIL dynamics. The observed interfacial phenomena underscore the importance of tailoring the surface properties of porous carbons to achieve desirable electrolyte dynamic behavior, since this impacts the performance in applications such as electrical energy storage devices.

  8. A roadmap to uranium ionic liquids: Anti-crystal engineering

    SciTech Connect

    Yaprak, Damla; Spielberg, Eike T.; Bäcker, Tobias; Richter, Mark; Mallick, Bert; Klein, Axel; Mudring, Anja -Verena

    2014-04-15

    In the search for uranium-based ionic liquids, tris(N,N-dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1-butyl-3-methylimidazolium (C4mim) cation. As dithiocarbamate ligands binding to the UO22+ unit, tetra-, penta-, hexa-, and heptamethylenedithiocarbamates, N,N-diethyldithiocarbamate, N-methyl-N-propyldithiocarbamate, N-ethyl-N-propyldithiocarbamate, and N-methyl-N-butyldithiocarbamate have been explored. X-ray single-crystal diffraction allowed unambiguous structural characterization of all compounds except N-methyl-N-butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X-ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase-transition behavior depending on the N,N-dialkyldithiocarbamato ligand with the aim to establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N-dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N-methyl-N-propyldithiocarbamato)uranylate, tris(N-ethyl-N-propyldithiocarbamato)uranylate, and tris(N-methyl-N-butyldithiocarbamato)uranylate, lead to the formation of (room-temperature) ionic liquids, which confirms that low-symmetry ions are indeed suitable to suppress crystallization. As a result, these materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.

  9. A roadmap to uranium ionic liquids: Anti-crystal engineering

    DOE PAGES

    Yaprak, Damla; Spielberg, Eike T.; Bäcker, Tobias; ...

    2014-04-15

    In the search for uranium-based ionic liquids, tris(N,N-dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1-butyl-3-methylimidazolium (C4mim) cation. As dithiocarbamate ligands binding to the UO22+ unit, tetra-, penta-, hexa-, and heptamethylenedithiocarbamates, N,N-diethyldithiocarbamate, N-methyl-N-propyldithiocarbamate, N-ethyl-N-propyldithiocarbamate, and N-methyl-N-butyldithiocarbamate have been explored. X-ray single-crystal diffraction allowed unambiguous structural characterization of all compounds except N-methyl-N-butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X-ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase-transition behavior depending on the N,N-dialkyldithiocarbamato ligand with the aim tomore » establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N-dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N-methyl-N-propyldithiocarbamato)uranylate, tris(N-ethyl-N-propyldithiocarbamato)uranylate, and tris(N-methyl-N-butyldithiocarbamato)uranylate, lead to the formation of (room-temperature) ionic liquids, which confirms that low-symmetry ions are indeed suitable to suppress crystallization. As a result, these materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.« less

  10. Separation of polysaccharides from rice husk and wheat bran using solvent system consisting of BMIMOAc and DMI.

    PubMed

    Hou, Qidong; Li, Weizun; Ju, Meiting; Liu, Le; Chen, Yu; Yang, Qian; Wang, Jingyu

    2015-11-20

    A solvent system consisting of 1,3-dimethyl-2-imidazolidinone (DMI), and ionic liquid 1-butyl-3-methylimidazolium acetate (BMIMOAc) was used to separate polysaccharides from rice husk and wheat bran. The effects of the DMI/BMIMOAc ratios, temperature, and time on the dissolution of rice husk and wheat bran were investigated, and the influence of anti-solvents on the regeneration of polysaccharides-rich material was evaluated. We found that the solvent system is more powerful to dissolve rice husk and wheat bran than pure BMIMOAc, and that polysaccharides-rich material can be effectively separated from the biomass solution. The polysaccharides content of regenerated material from wheat bran can reach as high as 94.4% when ethanol was used as anti-solvents. Under optimized conditions, the extraction rate of polysaccharides for wheat bran can reach as high as 71.8% at merely 50°C. The recycled solvent system exhibited constant ability to separate polysaccharides from rice husk and wheat bran.

  11. Nonaqueous CE using contactless conductivity detection and ionic liquids as BGEs in ACN.

    PubMed

    Borissova, Maria; Gorbatsova, Jelena; Ebber, Arkadi; Kaljurand, Mihkel; Koel, Mihkel; Vaher, Merike

    2007-10-01

    N,N'-Alkylmethylimidazolium cations have been separated in NACE when one of the N,N'-dialkylimidazolium salts (ionic liquids (ILs)) was used as an electrolyte additive to the organic solvent separation medium. The separated species were 1-methyl-, 1-ethyl-, 1-butyl-, 1-octyl-, 1-decyl-3-methylimidazolium and N-butyl-3-methylpyridinium cations and BGE composed of 1-ethyl-3-methylimidazolium ethylsulfate or 1-butyl-3-methylimidazolium trifluoroacetate [BMIm][FAcO] (A6; B2) diluted in ACN. It was demonstrated that contactless conductivity detection (CCD) may be applied to monitoring the separation process in nonaqueous separation media, allowing to use the UV light-absorbing imidazolium-based electrolyte additives. There could be marked three concentration regions of added ILs; at first ionic strength of BGE below 1-2 mM, and then the actual electrophoretic mobility of analytes rises from 0. At concentrations above 1-2 mM, the added IL facilitated separation. In concentration region of 1-20 mM, the actual electrophoretic mobility of analyzed imidazolium cations was increasing with decrease in separation medium ionic strength. At higher concentrations of BGE (above 30 mM), the conductivity of the separation media became too high for this detector. Some organic dyes were also successfully separated and detected by contactless conductivity detector in a 20 mM A6 separation electrolyte in ACN.

  12. Solvent effects on the polar network of ionic liquid solutions

    NASA Astrophysics Data System (ADS)

    Bernardes, Carlos E. S.; Shimizu, Karina; Canongia Lopes, José N.

    2015-05-01

    Molecular dynamics simulations were used to probe mixtures of ionic liquids (ILs) with common molecular solvents. Four types of systems were considered: (i) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide plus benzene, hexafluorobenzene or 1,2-difluorobenzene mixtures; (ii) choline-based ILs plus ether mixtures (iii) choline-based ILs plus n-alkanol mixtures; and (iv) 1-butyl-3-methylimidazolium nitrate and 1-ethyl-3-methylimidazolium ethyl sulfate aqueous mixtures. The results produced a wealth of structural and aggregation information that highlight the resilience of the polar network of the ILs (formed by clusters of alternating ions and counter-ions) to the addition of different types of molecular solvent. The analysis of the MD data also shows that the intricate balance between different types of interaction (electrostatic, van der Waals, H-bond-like) between the different species present in the mixtures has a profound effect on the morphology of the mixtures at a mesoscopic scale. In the case of the IL aqueous solutions, the present results suggest an alternative interpretation for very recently published x-ray and neutron diffraction data on similar systems.

  13. Degradation pathway and kinetics of 1-alkyl-3-methylimidazolium bromides oxidation in an ultrasonic nanoscale zero-valent iron/hydrogen peroxide system.

    PubMed

    Zhou, Haimei; Shen, Yuanyuan; Lv, Ping; Wang, Jianji; Li, Pu

    2015-03-02

    Fenton and Fenton-like oxidation has been already demonstrated to be efficient for the degradation of imidazolium ionic liquids (ILs), but little is known for their degradation pathway and kinetics in such systems. In this work, degradation pathway and kinetics of 1-alkyl-3-methylimidazolium bromides ([Cnmim]Br, n=2, 4, 6, 8, and 10) were investigated in an ultrasound nanoscale zero-valent iron/hydrogen peroxide (US-nZVI/H2O2) system. For this purpose, 1-butyl-3-methylimidazolium bromide ([C4mim]Br) was used as a representative ionic liquid to optimize pH value, nZVI dose, and H2O2 concentration for the degradation reaction. Then, the degradation kinetics of [Cnmim]Br was investigated under optimal conditions, and their degradation intermediates were monitored by gas chromatography-mass spectrometry (GC-MS). It was shown that the degradation of [Cnmim]Br in such a heterogeneous Fenton-like system could be described by a second order kinetic model, and a number of intermediate products were detected. Based on these intermediate products, detailed pathways were proposed for the degradation of [Cnmim]Br in the ultrasound-assisted nZVI/H2O2 system. These findings may be useful for the better understanding of degradation mechanism of the imidazolium ILs in aqueous solutions.

  14. Catalysis of Rice Straw Hydrolysis by the Combination of Immobilized Cellulase from Aspergillus niger on β-Cyclodextrin-Fe3O4 Nanoparticles and Ionic Liquid

    PubMed Central

    Huang, Po-Jung; Chang, Ken-Lin; Chen, Shui-Tein

    2015-01-01

    Cellulase from Aspergillus niger was immobilized onto β-cyclodextrin-conjugated magnetic particles by silanization and reductive amidation. The immobilized cellulase gained supermagnetism due to the magnetic nanoparticles. Ninety percent of cellulase was immobilized, but the activity of immobilized cellulase decreased by 10%. In this study, ionic liquid (1-butyl-3-methylimidazolium chloride) was introduced into the hydrolytic process because the original reaction was a solid-solid reaction. The activity of immobilized cellulase was improved from 54.87 to 59.11 U g immobilized cellulase−1 at an ionic liquid concentration of 200 mM. Using immobilized cellulase and ionic liquid in the hydrolysis of rice straw, the initial reaction rate was increased from 1.629 to 2.739 g h−1 L−1. One of the advantages of immobilized cellulase is high reusability—it was usable for a total of 16 times in this study. Compared with free cellulase, magnetized cellulase can be recycled by magnetic field and the activity of immobilized cellulase was shown to remain at 85% of free cellulase without denaturation under a high concentration of glucose (15 g L−1). Therefore, immobilized cellulase can hydrolyze rice straw continuously compared with free cellulase. The amount of harvested glucose can be up to twentyfold higher than that from the hydrolysis by free cellulase. PMID:25874210

  15. X-ray Reflectivity Study of the Interaction of an Imidazolium-Based Ionic Liquid with a Soft Supported Lipid Membrane.

    PubMed

    Bhattacharya, G; Giri, R P; Saxena, H; Agrawal, V V; Gupta, A; Mukhopadhyay, M K; Ghosh, S K

    2017-02-07

    Ionic liquids (ILs) are important for their antimicrobial activity and are found to be toxic to some microorganisms. To shed light on the mechanism of their activities, the interaction of an imidazolium-based IL 1-butyl-3-methylimidazolium tetrfluoroborate ([BMIM][BF4]) with E. coli bacteria and cell-membrane-mimicking lipid mono- and bilayers has been studied. The survival of the bacteria and corresponding growth inhibition are observed to be functions of the concentration of the IL. The IL alters the pressure-area isotherm of the monolayer formed at an air-water interface by the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid. The in-plane elasticity of the lipid layer is reduced as a consequence of the insertion of this IL. The X-ray reflectivity study from a polymer-supported lipid bilayer shows strong perturbation in the self-assembled structure of the bilayer due to the interaction. As a consequence, there is a considerable decrease in bilayer thickness and a corresponding increase in electron density. These results, however, depend on the chain configurations of the lipid molecules.

  16. Structural and Dielectric Properties of Ionic Liquid Doped Metal Organic Framework based Polymer Electrolyte Nanocomposites

    NASA Astrophysics Data System (ADS)

    Dutta, Rituraj; Kumar, Ashok

    2016-10-01

    Metal Organic Frameworks (MOFs) are mesoporous materials that can be treated as potential hosts for trapping guest molecules in their pores. Ion conduction and phase behavior dynamics of Ionic Liquids (ILs) can be controlled by tunable interactions of MOFs with the ILs. MOFs incorporated with ionic liquid can be dispersed in the polymers to synthesize polymer electrolyte nanocomposites with high ionic conductivity, electrochemical and thermal stability for applications in energy storage and conversion devices such as rechargeable Li-ion batteries. In the present work we have synthesized Cu-based MOF [Cu3(l,3,5-benzene tricarboxylate)2(H2O)] incorporated with the ionic liquid 1-Butyl-3-methylimidazolium bromide at different weight ratios of MOF and IL. The synthesized MOF-IL composites are dispersed in Poly (ethylene oxide) (PEO). Frequency dependent behavior of permittivity and dielectric loss of the nanocomposites depict the non-Debye dielectric relaxation mechanism. The room temperature Nyquist plots reveal decreasing bulk resistance upto 189 Ω with optimum ionic conductivity of 1.3×10-3S cm-1at maximum doping concentration of IL in the nanocomposite system.

  17. Letter: High-mass capabilities of positive-ion and negative-ion direct analysis in real time mass spectrometry.

    PubMed

    Gross, Jürgen H

    2016-01-01

    Of the ionic liquid 1-butyl-3-methylimidazolium (C(+)) tricyanomethide (A(-)) high-mass cluster ions of both positive ([C(n)A(n-1)](+)) and negative ([C(n-1)A(n)](-)) charge were generated and detected by direct analysis in real time (DART) Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry (MS). After optimization of the settings of the DART ionization source and of the mass analyzer ions of m/z values unprecedented in DART-MS were detected. Thus, the upper m/z limits of positive-ion and negative-ion DART- MS were substantially expanded. Negative-ion DART-MS delivered cluster ions up to [C(15)A(16)](-), m/z 3527 (nominal mass of monoisotopic ion), while positive-ion DART-MS even yielded ions up to [C(30)A(29)](+), m/z 6784. The identification of the cluster ions is supported by their accurate mass and exact mass differences corresponding to CA between adjacent cluster ion peaks.

  18. Ionic liquid-assisted sonochemical preparation of CeO2 nanoparticles for CO oxidation

    DOE PAGES

    Alammar, Tarek; Noei, Heshmat; Wang, Yuemin; ...

    2014-10-10

    CeO2 nanoparticles were synthesized via a one-step ultrasound synthesis in different kinds of ionic liquids based on bis(trifluoromethanesulfonylamide, [Tf2N]–, in combination with various cations including 1-butyl-3-methylimidazolium ([C4mim]+), 1-ethyl-2,3-dimethylimidazolium ([Edimim]+), butyl-pyridinium([Py4]+), 1-butyl-1-methyl-pyrrolidinium ([Pyrr14]+), and 2-hydroxyethyl-trimethylammonium ([N1112OH]+). Depending on synthetic parameters, such as ionic liquid, Ce(IV) precursor, heating method, and precipitator, formed ceria exhibits different morphologies, varying from nanospheres, nanorods, nanoribbons, and nanoflowers. The morphology, crystallinity, and chemical composition of the obtained materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and N2 adsorption. The structural and electronic propertiesmore » of the as-prepared CeO2 samples were probed by CO adsorption using IR spectroscopy under ultrahigh vacuum conditions. The catalytic activities of CeO2 nanoparticles were investigated in the oxidation of CO. CeO2 nanospheres obtained sonochemically in [C4mim][Tf2N] exhibit the best performance for low-temperature CO oxidation. As a result, the superior catalytic performance of this material can be related to its mesoporous structure, small particle size, large surface area, and high number of surface oxygen vacancy sites.« less

  19. NMR Diffusion Measurements as a Simple Method to Examine Solvent-Solvent and Solvent-Solute Interactions in Mixtures of the Ionic Liquid [Bmim][N(SO2 CF3 )2 ] and Acetonitrile.

    PubMed

    Keaveney, Sinead T; Schaffarczyk McHale, Karin S; Stranger, James W; Ganbold, Batchimeg; Price, William S; Harper, Jason B

    2016-12-05

    The self-diffusion coefficients of each component in mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bmim][N(SO2 CF3 )2 ]) and acetonitrile were determined. The results suggest that the hydrodynamic boundary conditions change from "stick" to "slip" as the solvent composition transitions from "ionic liquid dissolved in acetonitrile" (χIL <0.4) to "acetonitrile dissolved in ionic liquid" (χIL >0.4). At higher χIL , the acetonitrile species are affected by "cage" and "jump" events, as the acetonitrile molecules reside nearer to the charged centre on the ions than in the "non-polar" regions. The self-diffusion coefficients of hexan-1-amine, dipropylamine, 1-hexanol and dipropylether in mixtures of [Bmim][N(SO2 CF3 )2 ] and acetonitrile were determined. In general, the nitrogen-containing solutes were found to diffuse slower than the oxygen-containing solutes; this indicates that there are greater ionic liquid-N interactions than ionic liquid-O interactions. This work demonstrates that the self-diffusion coefficients of species can provide valuable information about solvent-solvent and solvent-solute interactions in mixtures containing an ionic liquid.

  20. Significantly improving enzymatic saccharification of high crystallinity index's corn stover by combining ionic liquid [Bmim]Cl-HCl-water media with dilute NaOH pretreatment.

    PubMed

    He, Yu-Cai; Liu, Feng; Gong, Lei; Zhu, Zheng-Zhong; Ding, Yun; Wang, Cheng; Xue, Yu-Feng; Rui, Huan; Tao, Zhi-Cheng; Zhang, Dan-Ping; Ma, Cui-Luan

    2015-01-01

    In this study, a pretreatment by combining acidified aqueous ionic liquid 1-butyl-3-methylimidazolium chloride (IL [Bmim]Cl) solution with dilute NaOH extraction was employed to pretreat high crystallinity index (CrI) of corn stover before its enzymatic saccharification. After NaOH extraction, [Bmim]Cl-HCl-water (78.8:1.2:20, w/w/w) media was used for further pretreatment at 130 °C for 30 min. After being enzymatically hydrolyzed for 48 h, corn stover pretreated could be biotransformed into reducing sugars in the yield of 95.1%. Furthermore, SEM, XRD and FTIR analyses of untreated and pretreated corn stovers were examined. It was found that the intact structure was disrupted by combination pretreatment and resulted in a porous and amorphous regenerated cellulosic material that greatly improved enzymatic hydrolysis. Finally, the recovered hydrolyzates obtained from the enzymatic hydrolysis of pretreated corn stovers could be fermented into ethanol efficiently. In conclusion, the combination pretreatment shows high potential application in future.

  1. The effect of the number of alkyl substituents on imidazolium ionic liquids phytotoxicity and oxidative stress in spring barley and common radish seedlings.

    PubMed

    Biczak, Robert; Pawłowska, Barbara; Telesiński, Arkadiusz; Ciesielski, Wojciech

    2016-12-01

    Increasing amounts of two ILs: 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6] and 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [BMMIM][PF6], were introduced to soil in which spring barley (Hordeum vulgare) and common radish (Raphanus sativus L. subvar. radicula Pers.) seedlings were cultivated, in order to evaluate the phytotoxicity of ionic liquids with imidazolium cation with two or three alkyl substituents attached. The results of the study i.e. the inhibition of the length of plants and their roots, as well as the yield of fresh weight of plants, clearly showed that differences in the number of substituents did not affect the toxicity of these ILs. Although, radish was more resistant to the applied ionic liquids than barley. Ionic liquids led to a decrease in the content of all assimilation pigments and induced oxidative stress in the plants, as showed by an increase in malondialdehyde (MDA) content, and changes in the level of H2O2 and antioxidant enzymes: superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD). The best biomarkers of oxidative stress in both plants were the changes in chlorophyll content and the increase in POD activity. Both spring barley and radish exposed to [BMIM][PF6] and [BMMIM][PF6] accumulated a large amount of fluoride ions, which further increased the toxicity of these compounds for both plants.

  2. A study of the acid-catalyzed hydrolysis of cellulose dissolved in ionic liquids and the factors influencing the dehydration of glucose and the formation of humins.

    PubMed

    Dee, Sean J; Bell, Alexis T

    2011-08-22

    An investigation was carried out into the hydrolysis of cellulose dissolved in 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]) and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) catalyzed by mineral acids. Glucose, cellobiose, and 5-hydroxymethylfurfural (5-HMF) were observed as the primary reaction products. The initial rate of glucose formation was determined to be of first order in the concentrations of dissolved glucan and protons and of zero order in the concentration of water. The absence of a dependence on water concentration suggests that cleavage of the β-1,4-glycosidic linkages near chain ends is irreversible. The apparent activation energy for glucose formation is 96 kJ mol(-1). The absence of oligosaccharides longer than cellobiose suggests that cleavage of interior glycosidic bonds is reversible due to the slow diffusional separation of cleaved chains in the highly viscous glucan/ionic liquid solution. Progressive addition of water during the course of glucan hydrolysis inhibited the rate of glucose dehydration to 5-HMF and the formation of humins. The inhibition of glucose dehydration is attributed to stronger interaction of protons with water than the 2-OH atom of the pyranose ring of glucose, the critical step in the proposed mechanism for the formation of 5-HMF. The reduction in humin formation associated with water addition is ascribed to the lowered concentration of 5-HMF, since the formation of humins is suggested to proceed through the condensation polymerization of 5-HMF with glucose.

  3. Observation of Charge Inversion of an Ionic Liquid at the Solid Salt-Liquid Interface by Sum Frequency Generation Spectroscopy.

    PubMed

    Peñalber, Chariz Y; Baldelli, Steven

    2012-04-05

    Sum frequency generation (SFG) vibrational spectroscopy of the ionic liquid, 1-butyl-3-methylimidazolium dicyanamide [BMIM][DCA], in contact with two different solid salt surfaces, BaF2(111) single crystal and solid NaCl{100}, are discussed in this Letter. This investigation describes the nature of an ionic liquid-(solid) salt interface using SFG, contributing a new understanding to the molecular-level interactions involved in salts, which are conceptually similar compounds (of purely ionic character) but of different physical properties (liquid versus solid at room temperature). Results show the presence of [BMIM](+) at the NaCl{100} surface and [DCA](-) at the BaF2(111) surface. [BMIM](+) cations adhere closely via Coulombic interactions to the negatively charged NaCl{100} surface, while [DCA](-) anions subsequently have a strong electrostatic affinity to the positively charged BaF2(111) surface. Ions of the ionic liquid adsorb to the solid salt surface to form a Helmholtz-like electric double layer.

  4. Utilization of an ionic liquid in situ preconcentration method for the determination of the 15 + 1 European Union polycyclic aromatic hydrocarbons in drinking water and fruit-tea infusions.

    PubMed

    Germán-Hernández, Mónica; Crespo-Llabrés, Pilar; Pino, Verónica; Ayala, Juan H; Afonso, Ana M

    2013-08-01

    An ionic liquid (IL) in situ preconcentration method was optimized and applied to the monitoring of the 15 + 1 European Union polycyclic aromatic hydrocarbons in water and fruit-tea infusions. The optimized method utilizes 10 mL of water (or infusion) containing 38 μL of the IL 1-butyl-3-methylimidazolium chloride and a content of 36.1 g/L NaCl, which are mixed with Li-NTf2 (340 μL, 0.2 g/mL), followed by vortex (4 min) and centrifugation (5 min). The obtained microdroplet containing hydrocarbons is diluted with acetonitrile and injected into an HPLC with UV/Vis and fluorescence detection. The method presented average enrichment factors of 127 for water (tap water and bottled water) and 27 for two fruit-tea infusions; with average relative recoveries of 86.7 and 106% for water and fruit-tea infusions, respectively. The method was sensitive, with detection limits ranging from 0.001 to 0.050 ng/mL in water, and from 0.010 to 0.600 ng/mL in fruit-tea infusions, for the fluorescent hydrocarbons. Real extraction efficiencies ranged from 12.7 to 58.7% for water, and from 20.2 to 117% for the infusions. The method was also fast (~12 min) and free of organic solvents in the extraction step.

  5. Probing the interactions between ionic liquids and water: experimental and quantum chemical approach.

    PubMed

    Khan, Imran; Kurnia, Kiki A; Mutelet, Fabrice; Pinho, Simão P; Coutinho, João A P

    2014-02-20

    For an adequate choice or design of ionic liquids, the knowledge of their interaction with other solutes and solvents is an essential feature for predicting the reactivity and selectivity of systems involving these compounds. In this work, the activity coefficient of water in several imidazolium-based ionic liquids with the common cation 1-butyl-3-methylimidazolium was measured at 298.2 K. To contribute to a deeper insight into the interaction between ionic liquids and water, COSMO-RS was used to predict the activity coefficient of water in the studied ionic liquids along with the excess enthalpies. The results showed good agreement between experimental and predicted activity coefficient of water in ionic liquids and that the interaction of water and ionic liquids was strongly influenced by the hydrogen bonding of the anion with water. Accordingly, the intensity of interaction of the anions with water can be ranked as the following: [CF3SO3](-) < [SCN](-) < [TFA](-) < Br(-) < [TOS](-) < Cl(-) < [CH3SO3](-) [DMP](-) < [Ac](-). In addition, fluorination and aromatization of anions are shown to reduce their interaction with water. The effect of temperature on the activity coefficient of water at infinite dilution was measured by inverse gas chromatography and predicted by COSMO-RS. Further analysis based on COSMO-RS provided information on the nature of hydrogen bonding between water and anion as well as the possibility of anion-water complex formation.

  6. Effects of Oxygen-Containing Functional Groups on Supercapacitor Performance

    SciTech Connect

    Kerisit, Sebastien N.; Schwenzer, Birgit; Vijayakumar, M.

    2014-07-03

    Molecular dynamics (MD) simulations of the interface between graphene and the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM OTf) were carried out to gain molecular-level insights into the performance of graphene-based supercapacitors and, in particular, determine the effects of the presence of oxygen-containing defects at the graphene surface on their integral capacitance. The MD simulations predict that increasing the surface coverage of hydroxyl groups negatively affects the integral capacitance, whereas the effect of the presence of epoxy groups is much less significant. The calculated variations in capacitance are found to be directly correlated to the interfacial structure. Indeed, hydrogen bonding between hydroxyl groups and SO3 anion moieties prevents BMIM+ and OTf- molecules from interacting favorably in the dense interfacial layer and restrains the orientation and mobility of OTf- ions, thereby reducing the permittivity of the ionic liquid at the interface. The results of the molecular simulations can facilitate the rational design of electrode materials for supercapacitors.

  7. Probing electron density of H-bonding between cation-anion of imidazolium-based ionic liquids with different anions by vibrational spectroscopy.

    PubMed

    Gao, Yan; Zhang, Liqun; Wang, Yong; Li, Haoran

    2010-03-04

    Attenuated total reflection infrared spectroscopy and density functional theory calculation have been employed to study the spectral properties of imidazolium-based ionic liquids (ILs) with different anions. ILs based on 1-butyl-3-methylimidazolium cation with different anions, OH(-), CF(3)CO(2)(-), HSO(4)(-), H(2)PO(4)(-), Cl(-), PF(6)(-), and BF(4)(-), are investigated in the present work. It has been shown that the C(2)-H stretching vibration of the imidazolium ring is closely related to the electron density of H-bonding between the two closest cations and anions for pure ILs. The electron density of H-bonding between cation and anion with different anions decreases in the order [OH](-) > [H(2)PO(4)](-) > [HSO(4)](-) > [CF(3)CO(2)](-) > [Cl](-) > [BF(4)](-) > [PF(6)](-). For aqueous ILs, with increasing water content, the aromatic C-H stretching vibration of the imidazolium cation showed systematic blue-shifts. Especially for BmimOH, the nu(C(2))(-H) undergoes a drastic blue-shift by 58 cm(-1), suggesting that the formation of the strong hydrogen bonds O-H...O may greatly weaken the electron density of H-bonding between the cation and anion of ILs.

  8. Solvation of a Cellulose Microfibril in Imidazolium Acetate Ionic Liquids: Effect of a Cosolvent.

    PubMed

    Velioglu, Sadiye; Yao, Xun; Devémy, Julien; Ahunbay, M Goktug; Tantekin-Ersolmaz, S Birgul; Dequidt, Alain; Costa Gomes, Margarida F; Pádua, Agílio A H

    2014-12-26

    The solvation and the onset of dissolution of a cellulose I(β) microcrystal in ionic liquid media are studied by molecular simulation. Ionic liquids can dissolve large amounts of cellulose, which can later be regenerated from solution, but their high viscosity is an inconvenience. Hydrogen bonding between the anion of the ionic liquid and cellulose is the main aspect determining dissolution. Here we try to elucidate the role of a molecular cosolvent, dimethyl sulfoxide (DMSO), which is an aprotic polar compound, in the system composed of cellulose and the ionic liquid 1-butyl-3-methylimidazolium acetate. We calculated quantities related to specific interactions (mainly hydrogen bonds), conformations, and the structure of local solvation environments, both for a solvated oligomer chain of cellulose and for a model microfibril composed of 36 chains in the I(β) crystal structure. We compare two solvent systems: the pure ionic liquid and a mixed solvent with an equimolar composition in ionic liquid and DMSO. All entities are represented by detailed all-atom, fully flexible force fields. The main conclusions are that DMSO behaves as an "innocent" cosolvent, lowering the viscosity and accelerating mass transport in the system, but without interacting specifically with cellulose or disrupting the interactions between cellulose with the anions of the ionic liquid. An understanding of solvation in mixed solvents composed of ionic liquids and molecular compounds can enable the design of high-performance media for the use of biomass materials.

  9. Photoinduced electron transfer between 2-methylanthraquinone and triethylamine in an ionic liquid: Time-resolved EPR and transient absorption spectroscopy study

    NASA Astrophysics Data System (ADS)

    Zhu, Guanglai; Wang, Yu; Fu, Haiying; Xu, Xinsheng; Cui, Zhifeng; Ji, Xuehan; Wu, Guozhong

    2015-02-01

    Photoinduced electron transfer between 2-methylanthraquinone (MeAQ) and triethylamine (TEA) in a room-temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), was investigated by comparing the time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy and the transient absorption spectroscopy. The results of TR-EPR spectroscopy, in which MeAQ was 8 mmol L-1 and TEA was 150 mmol L-1, indicated that the transient radical would exist longer time in [bmim][PF6] than in acetonitrile. At the delay time of 8 μs after laser excitation, the TR-EPR signal transformed from an emissive peak into an absorptive peak when the experiment was performed in [bmim][PF6]. The results of the transient absorption spectroscopy, in which MeAQ was 0.1 mmol L-1 and TEA was 2.2 mmol L-1, showed that the efficiency and the rate of the photoinduced electron transfer reaction in [bmim][PF6] were obviously lower than that in acetonitrile. It was concluded that various factors, such as concentration, viscosity and local structural transformation of the solution, have an influence on the process of photoinduced electron transfer in [bmim][PF6].

  10. Hydrolysis of microcrystalline cellulose using functionalized Bronsted acidic ionic liquids - A comparative study.

    PubMed

    Parveen, Firdaus; Patra, Tanmoy; Upadhyayula, Sreedevi

    2016-01-01

    Cellulose conversion to platform chemicals is required to meet the demands of increasing population and modernization of the world. Hydrolysis of microcrystalline cellulose was studied with SO3H, COOH and OH functionalized imidazole based ionic liquid using 1-butyl-3-methylimidazolium chloride [BMIM]Cl as a solvent. The influence of temperature, time, acidity of ionic liquids and catalyst loading was studied on hydrolysis reaction. The maximum %TRS yield 85%, was obtained at 100°C and 90min with 0.2g of SO3H functionalized ionic liquid. UV-vis spectroscopy using 4-nitro aniline as an indicator was performed to find out the Hammett function of ionic liquid and acidity trends are as follows: SO3H>COOH>OH. Density functional theory (DFT) calculations were performed to optimize the ionic liquid and their conjugate bases at B3LYP 6-311G++ (d, p) level using Gaussian 09 program. Theoretical findings are in agreement with the experimental results.

  11. SO₃H-functionalized acidic ionic liquids as catalysts for the hydrolysis of cellulose.

    PubMed

    Liu, Yuanyuan; Xiao, Wenwen; Xia, Shuqian; Ma, Peisheng

    2013-01-30

    The conversion of cellulose into valuable chemicals to deal with the depletion of fossil fuel has got much attention. Completing the hydrolysis of cellulose under mild conditions is the key step. In this study, six kinds of SO(3)H-functionalized acidic ionic liquids were used as acid catalyst to promote the hydrolysis of cellulose in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl). All of them were efficient for the hydrolysis of cellulose, with the maximum total reducing sugars (TRS) yields over 83% at 100 °C. Acidic ionic liquids with analogous structures showed similar catalytic activities. Triethyl-(3-sulfo-propyl)-ammonium hydrogen sulfate (IL-5 in this study) was the optimum ionic liquid for cellulose hydrolysis, with the maximum TRS yield at 100 °C up to 99% when the dosage used was 0.2g. In addition, the water in [BMIM]Cl had negative effect on cellulose hydrolysis. Therefore, controlling the content of water in a comparatively low level is quite necessary.

  12. The Overriding Roles of Concentration and Hydrophobic Effect on Structure and Stability of Heme Protein Induced by Imidazolium-Based Ionic Liquids.

    PubMed

    Jha, Indrani; Kumar, Awanish; Venkatesu, Pannuru

    2015-07-02

    Spectroscopic and molecular docking investigations were carried out to characterize the effect of imidazolium-based ionic liquids (ILs) with varying chain length of the cation on the thermal stability as well as spectroscopic behavior of heme protein hemoglobin (Hb). The goal of this work is to investigate the role of concentration of ILs, the effect of alkyl chain length of the cation, and the related Hofmeister series on the structure of Hb. To achieve this goal, a series of ILs possessing same Cl(-) anion and a set of cation [Cnmim](+) with increasing chain length such as 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]), 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), 1-hexyl-3-methylimidazolium chloride ([Hmim][Cl]), and 1-decyl-3-methylimidazolium chloride ([Dmim][Cl]) were used in this study. It was observed that the stability of the protein was concentration dependent as well as the hydrophobic interactions between [Cnmim](+) of ILs, and the amino acid residues in the protein played a major role in protein unfolding. As a consequence, the destabilization tendency of the ILs toward the Hb increases with increasing chain length of the cation of ILs. Additionally, the cations of the ILs obeyed the Hofmeister series when arranged in the order of providing stability to Hb structure.

  13. Dissolution of the rare-earth mineral bastnaesite by acidic amide ionic liquid for recovery of critical

    SciTech Connect

    Dai, Sheng; Freiderich, John W.; Luo, Huimin; Moyer, Bruce A.; Stankovich, Joseph J.

    2015-08-19

    Rare-earth elements provide the cornerstones to clean sustainable energy and modern technologies such as computers, communications, and transportation. As such, the recovery of rare earths (REs) from minerals such as bastnaesite remains important for modern times. As the light lanthanides (La–Nd) constitute the majority (typically > 98.7 %) of the REs in bastnaesite with the heavy REs (Sm–Lu) contributing the remainder (approximately 1.3 %), an enrichment of heavier REs may serve as an effective means of assisting rare-earth recovery. Such an extractive metallurgy process involving ionic liquids (ILs) leads to an enrichment of heavy REs by nearly an order of magnitude. The acidic IL N,N-dimethylacetamidium bis(trifluoromethylsulfonyl)imide (DMAH+NTf2) in the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM+NTf2) dissolves froth flotation bastnaesite, synthetic bastnaesite analogues (RECO3F), RE2O3, and RE2(CO3)3 minerals. Furthermore, an overall reaction for the dissolution of bastnaesite is proposed for this IL system. This IL system may provide the initial stages of a greater RE separation scheme for bastnaesite froth flotation concentrates.

  14. Unusual solvatochromic absorbance probe behaviour within mixtures of poly(ethylene glycol)-400 + ionic liquid, [bmim][Tf2N

    NASA Astrophysics Data System (ADS)

    Ali, Anwar; Ali, Maroof; Malik, Nisar Ahmad; Uzair, Sahar

    2014-03-01

    The potentially green solvents made up of ionic liquids (ILs) and poly(ethylene glycols) may have wide range of the applications in many chemical and biochemical fields. In the present work, solvatochromic absorbance probe behaviour is used to assess the physicochemical properties of the mixtures composed of PEG-400 + IL, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][Tf2N]. Lowest energy intramolecular charge-transfer absorbance maxima of a betaine dye, i.e., ETN , indicates the dipolarity/polarizability and/or hydrogen-bond donating (HBD) acidity of the [bmim][Tf2N] + PEG-400 mixtures to be even higher than that of neat [bmim][Tf2N], the solution component with higher dipolarity/polarizability and/or HBD acidity. Dipolarity/polarizability (π∗) obtained separately from the electronic absorbance response of probe N,N-diethyl-4-nitroaniline, and the HBD acidity (α) of PEG-400 + [bmim][Tf2N] mixtures are also observed to be anomalously high. A comparative study of the PEG + IL mixtures has also been done with PEG-400 + molecular organic solvents (protic polar [methanol], aprotic polar [N,N-dimethylformamide], and non polar, [benzene]) mixtures, but these mixtures do not show this type of unusual behaviour. A four-parameter simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is shown to satisfactorily predict the solvatochromic parameters within PEG-400 + different solvent mixtures.

  15. Influence of electrolyte composition on the photovoltaic performance and stability of dye-sensitized solar cells with multiwalled carbon nanotube catalysts.

    PubMed

    Seo, Seon Hee; Kim, Su Yeon; Koo, Bo-Kun; Cha, Seung-Il; Lee, Dong Yoon

    2010-06-15

    Efficient dye-sensitized solar cells (DSCs) were realized by using multiwalled carbon nanotubes (CNTs) as the counter-electrode catalyst. The catalytic layers were produced from an aqueous paste of mass-produced raw CNTs with carboxymethylcellulose polymer by low-temperature (70 degrees C) drying. We found that the highly disordered CNTs played the important role of increasing the fill factor of DSCs with electrolytes including large molecules and that the presence of Li(+) as the counter charges for I(3)(-)/I(-) redox couples reduced the chemical stability when using the CNT catalyst. Our experiments showed that by replacing the conventional Pt catalyst and Li(+)-based electrolyte with the proposed CNT catalyst and an electrolyte containing 1-butyl-3-methylimidazolium cations instead of Li(+), the energy conversion efficiency increased from 6.51% to 7.13%. This result suggests that highly defective CNT catalysts prepared by low-temperature drying are viable cost-effective alternatives for DSCs, as long as the electrolytes composition is optimized.

  16. Thinning of reverse osmosis membranes by ionic liquids

    NASA Astrophysics Data System (ADS)

    Meng, Hong; Gong, Beibei; Geng, Tao; Li, Chunxi

    2014-02-01

    In this study, ionic liquids (ILs) were used to thin out the dense layer and, in turn, tune the surface properties and separation performance of commercial aromatic polyamide reverse osmosis membranes. It was observed that the structure of the ILs and dipping time had a strong impact on the dense layer thickness and morphology. This can be understood in terms of the dissolubility and interaction force between ILs and the organic membrane surface, such as hydrogen bonding and π-π interactions. Among the ILs synthesized, 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) showed the most promising thinning effects. It was observed that the thickness of the dense layer on the surface decreased from 127 to 67 nm after dipping treatment with [BMIM]Cl for 24 h. The water flux was enhanced by 20% at the expense of a slight decline of salt rejection. AFM, contact angle and zeta potential analyses suggest that the surface hydrophilicity and electronegativity increased, while the roughness decreased, which improved the anti-fouling properties.

  17. Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes.

    PubMed

    Mohtar, S S; Tengku Malim Busu, T N Z; Md Noor, A M; Shaari, N; Yusoff, N A; Bustam Khalil, M A; Abdul Mutalib, M I; Mat, H B

    2015-09-01

    The objective of this study is to extract and characterize lignin from oil palm biomass (OPB) by dissolution in 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), followed by the lignin extraction through the CO2 gas purging prior to addition of aluminum potassium sulfate dodecahydrate (AlK(SO4)2 · 12H2O). The lignin yield, Y(L) (%wt.) was found to be dependent of the types of OPB observed for all precipitation methods used. The lignin recovery, RL (%wt.) obtained from CO2-AlK(SO4)2 · 12H2O precipitation was, however dependent on the types of OPB, which contradicted to that of the acidified H2SO4 and HCl solutions of pH 0.7 and 2 precipitations. Only about 54% of lignin was recovered from the OPB. The FTIR results indicate that the monodispersed lignin was successfully extracted from the OPT, OPF and OPEFB having a molecular weight (MW) of 1331, 1263 and 1473 g/mol, and degradation temperature of 215, 207.5 and 272 °C, respectively.

  18. A novel support for laccase immobilization: cellulose acetate modified with ionic liquid and application in biosensor for methyldopa detection.

    PubMed

    Moccelini, Sally K; Franzoi, Ana C; Vieira, Iolanda C; Dupont, Jairton; Scheeren, Carla W

    2011-04-15

    A material based on cellulose acetate (CA) and the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI·N(Tf)(2)) was developed and characterized by scanning electron microscopy, electron dispersive spectroscopy and infrared analysis. Laccase (Lac) from Aspergillus oryzae was immobilized in this material to investigate the behavior of methyldopa by square-wave voltammetry. Under optimized conditions, the Lac biosensor based on CA/BMI·N(Tf)(2) exhibited an excellent electrocatalytic performance: the analytical curve showed good linear range for methyldopa concentrations from 34.8 to 370.3 μM with a detection limit of 5.5 μM. This sensor demonstrated acceptable stability (ca. 60 days; at least 350 determinations), good repeatability and reproducibility (relative standard deviations of 1.5 and 4.3%, respectively). The recovery study of methyldopa in pharmaceutical formulations ranged from 94.1 to 105.9%. The determination of this substance using the biosensor compared favorably with that using a spectrophotometry procedure at the 95% confidence level, and indicated potential application to methyldopa determination in pharmaceutical samples.

  19. Inkjet printing of nanoporous gold electrode arrays on cellulose membranes for high-sensitive paper-like electrochemical oxygen sensors using ionic liquid electrolytes.

    PubMed

    Hu, Chengguo; Bai, Xiaoyun; Wang, Yingkai; Jin, Wei; Zhang, Xuan; Hu, Shengshui

    2012-04-17

    A simple approach to the mass production of nanoporous gold electrode arrays on cellulose membranes for electrochemical sensing of oxygen using ionic liquid (IL) electrolytes was established. The approach, combining the inkjet printing of gold nanoparticle (GNP) patterns with the self-catalytic growth of these patterns into conducting layers, can fabricate hundreds of self-designed gold arrays on cellulose membranes within several hours using an inexpensive inkjet printer. The resulting paper-based gold electrode arrays (PGEAs) had several unique properties as thin-film sensor platforms, including good conductivity, excellent flexibility, high integration, and low cost. The porous nature of PGEAs also allowed the addition of electrolytes from the back cellulose membrane side and controllably produced large three-phase electrolyte/electrode/gas interfaces at the front electrode side. A novel paper-based solid-state electrochemical oxygen (O(2)) sensor was therefore developed using an IL electrolyte, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF(6)). The sensor looked like a piece of paper but possessed high sensitivity for O(2) in a linear range from 0.054 to 0.177 v/v %, along with a low detection limit of 0.0075% and a short response time of less than 10 s, foreseeing its promising applications in developing cost-effective and environment-friendly paper-based electrochemical gas sensors.

  20. Halloysite clay nanotubes and platinum nanoparticles dispersed in ionic liquid applied in the development of a catecholamine biosensor.

    PubMed

    Brondani, Daniela; Scheeren, Carla Weber; Dupont, Jairton; Vieira, Iolanda Cruz

    2012-08-21

    Halloysite clay nanotubes were used as a support for the immobilization of the enzyme peroxidase from clover sprouts (Trifolium), and employed together with platinum nanoparticles in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Pt-BMI·PF(6)) in the development of a new biosensor for the determination of catecholamines by square-wave voltammetry. Under optimized conditions, the analytical curves showed detection limits of 0.05, 0.06, 0.07, 0.12 μM for dopamine, isoproterenol, dobutamine and epinephrine, respectively. The biosensor demonstrated high sensitivity, good repeatability and reproducibility, and long-term stability (18% decrease in response over 150 days). A recovery study of dopamine in pharmaceutical samples gave values from 97.5 to 101.4%. The proposed biosensor was successfully applied to the determination of dopamine in pharmaceutical samples, with a maximum relative error of ±1.0% in relation to the standard (spectrophotometric) method. The good analytical performance of the proposed method can be attributed to the efficient immobilization of the peroxidase in the nanoclay, and the facilitation of electron transfer between the protein and the electrode surface due to the presence of the Pt nanoparticles and ionic liquid.

  1. Experimental and numerical investigations of ionic liquid-aqueous flow in microchannel

    NASA Astrophysics Data System (ADS)

    Li, Qi; Tsaoulidis, Dimitrios; Angeli, Panagiota

    2015-11-01

    The hydrodynamic characteristics of plug flow of an ionic liquid-aqueous two-phase system in a microchannel were studied experimentally and numerically. A mixture of 0.2M N-octyl(plenyl)-N,N-diisobutylcarbamoylmethyphosphine oxide (CMOP)- 1.2 M Tri-n-butylphosphate (TBP) in room temperature ionic liquid 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide ([C4min][NTf2]), and a nitric acid solution of 1M were chosen. These fluids are relevant Eu(III) separation by extraction from nitric acid solutions. The two liquid phases were introduced into microchannels of 0.2 and 0.5mm internal diameter through a T-junction inlet. The flow pattern was visualized during plug formation at the inlet section and further downstream by means by bright field planar micro-Particle Image Velocimetry. Key features of plug flow, such as plug velocity, film thickness, plug length and recirculation intensity were measured under various experimental conditions. To gain further understanding of the 3-D flow field, Computation Fluid Dynamics (CFD) simulations approach were also conducted.

  2. On the importance of simultaneous infrared/fiber-optic temperature monitoring in the microwave-assisted synthesis of ionic liquids.

    PubMed

    Obermayer, David; Kappe, C Oliver

    2010-01-07

    The temperature profiles obtained from both an external infrared and internal fiber-optic sensor were compared for heating and synthesizing the ionic liquid 1-butyl-3-methylimidazolium bromide (bmimBr) under microwave conditions. Utilizing a single-mode microwave reactor that allows simultaneous infrared/fiber-optic temperature measurements, significant differences between the two methods of temperature monitoring were revealed. Due to the strong microwave absorptivity of ionic liquids and the delay experienced in monitoring temperature on the outer surface of a heavy-walled glass vial, external infrared temperature sensors can not be used to accurately control the temperature in the heating of ionic liquids under microwave conditions. The use of internal fiber-optic probes allows the monitoring and control of the heating behavior in a much better way. In order to prevent the strong exotherm in the synthesis of bmimBr under microwave conditions the use of a reaction vessel made out of silicon carbide is the method of choice. Because of the high thermal conductivity and effusivity of silicon carbide, the heat generated during the ionic liquid formation is efficiently exchanged with the comparatively cool air in the microwave cavity via the silicon carbide ceramic.

  3. A Comprehensive Study on Lyotropic Liquid-Crystalline Behavior of an Amphiphile in 20 Kinds of Amino Acid Ionic Liquids.

    PubMed

    Fujimura, Kanae; Ichikawa, Takahiro; Yoshio, Masafumi; Kato, Takashi; Ohno, Hiroyuki

    2016-02-18

    We examined the self-organization behavior of a designed amphiphilic molecule in 20 kinds of amino acid ionic liquids composed of 1-butyl-3-methylimidazolium cation and natural amino acid anion ([C4mim][AA]). Addition of [C4mim][AA], regardless of their anion species, to the amphiphile provided homogeneous mixtures showing lyotropic liquid-crystalline (LC) behavior. Upon increasing the component ratio of [C4mim][AA] in the mixtures, a successive change of the mesophase patterns from inverted hexagonal columnar, in some case via bicontinuous cubic, to layered phases was observed. By examining the LC properties at various temperatures and component ratios, we constructed lyotropic LC phase diagrams. Interestingly, the appearance of these phase diagrams is greatly different according to the selection of [AA]. Through comparison, we found that the self-organization behavior of an amphiphile in ionic liquids can be tuned by controlling their ability to form hydrogen-bond, van der Waals, and π-π interactions.

  4. Application and recovery of ionic liquids in the preparative separation of four flavonoids from Rhodiola rosea by on-line three-dimensional liquid chromatography.

    PubMed

    Ma, Shufeng; Hu, Liming; Ma, Chaoyang; Lv, Wenping; Wang, Hongxin

    2014-09-01

    A novel on-line three-dimensional liquid chromatography method was developed to separate four main flavonoids from Rhodiola rosea. Ethyl acetate/0.5 mol/L ionic liquid 1-butyl-3-methylimidazolium chloride aqueous solution was selected as the solvent system. In the first-dimension separation, the target flavonoids were entrapped and subsequently desorbed into the second-dimension high-speed countercurrent chromatographic column for separation. In the third-dimension chromatography, the residual ionic liquid in the four separated flavonoids was removed and the used ionic liquid was recovered. As a result, 35.1 mg of compound 1, 20.4 mg of compound 2, 8.5 mg of compound 3, and 10.6 mg of compound 4 were obtained from 1.53 g R. rosea extract. They were identified as rhodiosin, rhodionin, herbacetin, and kaempferol, respectively. The recovery of ionic liquid reached 99.1% of the initial amount. The results showed that this method is a powerful technology for the separation of R. rosea flavonoids and that the ionic-liquid-based solvent system has advantages over traditional solvent systems in renewable and environmentally friendly properties.

  5. Structure and mechanisms underlying ion transport in ternary polymer electrolytes containing ionic liquids

    NASA Astrophysics Data System (ADS)

    Mogurampelly, Santosh; Ganesan, Venkat

    2017-02-01

    We use all atom molecular dynamics simulations to investigate the influence of 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) ionic liquid on the structure and transport properties of poly(ethylene oxide) (PEO) polymer electrolytes doped with LiPF6 salt. We observe enhanced diffusivities of the Li+, PF6-, and BMIM+ ions with increasing loading of the ionic liquid. Interplay between the different ion-ion and ion-polymer interactions is seen to lead to a destabilization of the Li-PF6 coordination and increase in the strength of association between the Li+ cations and the polymer backbone. As a consequence, the polymer segmental relaxation times are shown to be only moderately affected by the addition of ionic liquids. The ionic-liquid induced changes in the mobilities of Li+ ions are seen to be correlated to polymer segmental relaxation times. However, the mobilities of BMIM+ ions are seen to be more strongly correlated to the BMIM-PF6 ion-pair relaxation times.

  6. Dissociation of equimolar mixtures of aqueous carboxylic acids in ionic liquids: role of specific interactions.

    PubMed

    Shukla, Shashi Kant; Kumar, Anil

    2015-04-30

    Hammett acidity function observes the effect of protonation/deprotonation on the optical density/absorbance of spectrophotometric indicator. In this work, the Hammett acidity, H0, of equimolar mixtures of aqueous HCOOH, CH3COOH, and CH3CH2COOH was measured in 1-methylimidazolium-, 1-methylpyrrolidinium-, and 1-methylpiperidinium-based protic ionic liquids (PILs) and 1-butyl-3-methylimidazolium-based aprotic ionic liquid (AIL) with formate (HCOO(-)) anion. Higher H0 values were observed for the equimolar mixtures of aqueous carboxylic acids in protic ionic liquids compared with those of the aprotic ionic liquid because of the involvement of the stronger specific interactions between the conjugate acid of ionic liquid and conjugate base of carboxylic acids as suggested by the hard-soft acid base (HSAB) theory. The different H0 values for the equimolar mixtures of aqueous carboxylic acids in protic and aprotic ionic liquids were noted to depend on the activation energy of proton transfer (Ea,H(+)). The higher activation energy of proton transfer was obtained in AIL, indicating lower ability to form specific interactions with solute than that of PILs. Thermodynamic parameters determined by the "indicator overlapping method" further confirmed the involvement of the secondary interactions in the dissociation of carboxylic acids. On the basis of the thermodynamic parameter values, the potential of different ionic liquids in the dissociation of carboxylic acids was observed to depend on the hydrogen bond donor acidity (α) and hydrogen bond acceptor basicity (β), characteristics of specific interactions.

  7. Optimization of Ionic Liquid Based Simultaneous Ultrasonic- and Microwave-Assisted Extraction of Rutin and Quercetin from Leaves of Velvetleaf (Abutilon theophrasti) by Response Surface Methodology

    PubMed Central

    Zhao, Chunjian; Lu, Zhicheng; He, Xin; Li, Zhao; Shi, Kunming; Yang, Lei; Fu, Yujie; Zu, Yuangang

    2014-01-01

    An ionic liquids based simultaneous ultrasonic and microwave assisted extraction (ILs-UMAE) method has been proposed for the extraction of rutin (RU), quercetin (QU), from velvetleaf leaves. The influential parameters of the ILs-UMAE were optimized by the single factor and the central composite design (CCD) experiments. A 2.00 M 1-butyl-3-methylimidazolium bromide ([C4mim]Br) was used as the experimental ionic liquid, extraction temperature 60°C, extraction time 12 min, liquid-solid ratio 32 mL/g, microwave power of 534 W, and a fixed ultrasonic power of 50 W. Compared to conventional heating reflux extraction (HRE), the RU and QU extraction yields obtained by ILs-UMAE were, respectively, 5.49 mg/g and 0.27 mg/g, which increased, respectively, 2.01-fold and 2.34-fold with the recoveries that were in the range of 97.62–102.36% for RU and 97.33–102.21% for QU with RSDs lower than 3.2% under the optimized UMAE conditions. In addition, the shorter extraction time was used in ILs-UMAE, compared with HRE. Therefore, ILs-UMAE was a rapid and an efficient method for the extraction of RU and QU from the leaves of velvetleaf. PMID:25243207

  8. Determination of pyrethroid pesticides in tomato using ionic liquid-based dispersive liquid-liquid microextraction.

    PubMed

    Han, Dandan; Tang, Baokun; Row, Kyung Ho

    2014-03-01

    A sensitive determination method was developed for the analysis of pyrethroid pesticide residues in tomato samples using ionic liquid-based dispersive liquid-liquid microextraction. A hydrophobic ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) and acetonitrile were used as the extraction solvent and dispersive solvent, respectively. The following experimental parameters affecting the extraction efficiency were examined: types of extraction solvent and volume of extraction solvent, types of dispersive solvent and volume of dispersive solvent and pH and ion strength of the sample solution. Under the optimum conditions, the extraction recoveries ranged from 83.9 to 96.7%. Moreover, the enrichment factors for esbiothrin, fenpropathrin and cyhalothrin were 42, 48 and 45, respectively. The calibration curves were linear with correlation coefficients ranging from 0.9997 to 0.9999 at concentrations of 0.05-1.5 µg/kg. The relative standard deviation (n = 5) was 1.7-4.5%. The limits of detection for esbiothrin, fenpropathrin and cyhalothrin were 8.1, 9.9 and 14.3 µg/kg, respectively.

  9. Temperature-controlled ionic liquid-based ultrasound-assisted microextraction for preconcentration of trace quantity of cadmium and nickel by using organic ligand in artificial saliva extract of smokeless tobacco products.

    PubMed

    Arain, Sadaf Sadia; Kazi, Tasneem Gul; Arain, Asma Jabeen; Afridi, Hassan Imran; Baig, Jameel Ahmed; Brahman, Kapil Dev; Naeemullah; Arain, Salma Aslam

    2015-03-05

    A new approach was developed for the preconcentration of cadmium (Cd) and nickel (Ni) in artificial saliva extract of dry snuff (brown and black) products using temperature-controlled ionic liquid-based ultrasound-assisted dispersive liquid-liquid microextraction (TIL-UDLLμE) followed by electrothermal atomic absorption spectrometry (ETAAS). The Cd and Ni were complexed with ammonium pyrrolidinedithiocarbamate (APDC), extracted in ionic liquid drops, 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6]. The multivariate strategy was applied to estimate the optimum values of experimental variables influence the % recovery of analytes by TIL-UDLLμE method. At optimum experimental conditions, the limit of detection (3s) were 0.05 and 0.14μgL(-1) while relative standard deviations (% RSD) were 3.97 and 3.55 for Cd and Ni respectively. After extraction, the enhancement factors (EF) were 87 and 79 for Cd and Ni, respectively. The RSD for six replicates of 10μgL(-1) Cd and Ni were 3.97% and 3.55% respectively. To validate the proposed method, certified reference material (CRM) of Virginia tobacco leaves was analyzed, and the determined values of Cd and Ni were in good agreement with the certified values. The concentration of Cd and Ni in artificial saliva extracts corresponds to 39-52% and 21-32%, respectively, of the total contents of both elements in dry brown and black snuff products.

  10. Ionic liquid-based dispersive liquid-liquid microextraction for sensitive determination of aromatic amines in environmental water.

    PubMed

    Han, Dandan; Yan, Hongyuan; Row, Kyung H

    2011-05-01

    Ionic liquid-based dispersive liquid-liquid microextraction was developed for the extraction and preconcentration of aromatic amine from environmental water. A suitable mixture of extraction solvent (100 μL, 1-butyl-3-methylimidazolium hexafluorophoshate) and dispersive solvent (750 μL, methanol) were injected into the aqueous samples (10.00 mL), forming a cloudy solution. After centrifuging, enriched analytes in the sediment phase were determined by HPLC-UV. The effect of various factors, such as the extraction and dispersive solvent, sample pH, extraction time and salt effect were investigated. Under optimum conditions, enrichment factors for 2-anilinoethanol, o-chloroaniline and 4-bromo-N,N-dimethylaniline were above 50 and the limits of detection (LODs) were 0.023, 0.015 and 0.026 ng/mL, respectively. Their linear ranges were 0.8-400 ng/mL for 2-anilinoethanol, 0.5-200 ng/mL for o-chloroaniline and 0.4-200 ng/mL for 4-bromo-N,N-dimethylaniline, respectively. Relative standard deviations (RSDs) were below 5.0%. The relative recoveries from samples of environmental water were in the range of 82.0-94.0%. Compared with other methods, dispersive liquid-liquid microextraction is simple, rapid, sensitive and economical.

  11. Solvation Structure of Imidazolium Cation in Mixtures of [C4mim][TFSA] Ionic Liquid and Diglyme by NMR Measurements and MD Simulations.

    PubMed

    Shimomura, Takuya; Kodama, Daisuke; Kanakubo, Mitsuhiro; Tsuzuki, Seiji

    2017-04-06

    Interactions of 1-butyl-3-methylimidazolium cation ([C4mim](+)) with bis(trifluoromethanesulfonyl)amide anion ([TFSA](-)) and diethyleneglycol dimethyl ether (diglyme) in mixtures of [C4mim][TFSA] ionic liquid and diglyme have been investigated using (1)H and (13)C NMR spectroscopy and molecular dynamics (MD) simulations. The results of NMR chemical shift measurements and MD simulations showed that the diglyme oxygen atoms have contact with the imidazolium hydrogen atoms of [C4mim](+) in the mixtures. The contact between the hydrogen atoms of imidazolium and the oxygen atoms of [TFSA](-) remains even when the diglyme mole fraction (xdiglyme) increases up to 0.9. However, the coordination numbers of the hydrogen atoms of [C4mim](+) with oxygen atoms of diglyme increase with xdiglyme. The [TFSA](-) anions around [C4mim](+) are not completely replaced by diglyme even at xdiglyme > 0.9. The MD simulations revealed that the diglymes also have contact with the butyl group of [C4mim](+). The methyl groups of diglyme prefer to have contact with the terminal methyl group of the butyl group, whereas the diglyme oxygen atoms prefer to have contact with the methylene group connected to the imidazolium ring of [C4mim](+).

  12. Amyloid formation and disaggregation of {alpha}-synuclein and its tandem repeat ({alpha}-TR)

    SciTech Connect

    Bae, Song Yi; Kim, Seulgi; Hwang, Heejin; Kim, Hyun-Kyung; Yoon, Hyun C.; Kim, Jae Ho; Lee, SangYoon; Kim, T. Doohun

    2010-10-01

    Research highlights: {yields} Formation of the {alpha}-synuclein amyloid fibrils by [BIMbF{sub 3}Im]. {yields} Disaggregation of amyloid fibrils by epigallocatechin gallate (EGCG) and baicalein. {yields} Amyloid formation of {alpha}-synuclein tandem repeat ({alpha}-TR). -- Abstract: The aggregation of {alpha}-synuclein is clearly related to the pathogenesis of Parkinson's disease. Therefore, detailed understanding of the mechanism of fibril formation is highly valuable for the development of clinical treatment and also of the diagnostic tools. Here, we have investigated the interaction of {alpha}-synuclein with ionic liquids by using several biochemical techniques including Thioflavin T assays and transmission electron microscopy (TEM). Our data shows a rapid formation of {alpha}-synuclein amyloid fibrils was stimulated by 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BIMbF{sub 3}Im], and these fibrils could be disaggregated by polyphenols such as epigallocatechin gallate (EGCG) and baicalein. Furthermore, the effect of [BIMbF{sub 3}Im] on the {alpha}-synuclein tandem repeat ({alpha}-TR) in the aggregation process was studied.

  13. Functionalization of carbon nanotubes with water-insoluble porphyrin in ionic liquid: direct electrochemistry and highly sensitive amperometric biosensing for trichloroacetic acid.

    PubMed

    Tu, Wenwen; Lei, Jianping; Ju, Huangxian

    2009-01-01

    A functional composite of single-walled carbon nanotubes (SWNTs) with hematin, a water-insoluble porphyrin, was first prepared in 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) ionic liquid. The novel composite in ionic liquid was characterized by scanning electron microscopy, ultraviolet absorption spectroscopy, and electrochemical impedance spectroscopy, and showed a pair of direct redox peaks of the Fe(III)/Fe(II) couple. The composite-[BMIM][PF(6)]-modified glassy carbon electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid (TCA) in neutral media due to the synergic effect among SWNTs, [BMIM][PF(6)], and porphyrin, which led to a highly sensitive and stable amperometric biosensor for TCA with a linear range from 9.0x10(-7) to 1.4x10(-4) M. The detection limit was 3.8x10(-7) M at a signal-to-noise ratio of 3. The TCA biosensor had good analytical performance, such as rapid response, good reproducibility, and acceptable accuracy, and could be successfully used for the detection of residual TCA in polluted water. The functional composite in ionic liquid provides a facile way to not only obtain the direct electrochemistry of water-insoluble porphyrin, but also construct novel biosensors for monitoring analytes in real environmental samples.

  14. Direct electrochemistry and electrocatalysis of myoglobin based on silica-coated gold nanorods/room temperature ionic liquid/silica sol-gel composite film.

    PubMed

    Zhu, Wen-Lei; Zhou, Yang; Zhang, Jian-Rong

    2009-11-15

    A novel biosensor based on the silica-coated gold nanorods (GNRs@SiO(2)) and hydrophilic room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF(4)]) was fabricated for the determination of hydrogen peroxide (H(2)O(2)) and nitrite. GNRs@SiO(2) can not only act as a binder to hinder [bmim][BF(4)] (RTIL) leaking from the electrode surface, but also provide a favorable microenvironment for direct electrochemistry of myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the GNRs@SiO(2)-Mb/RTIL-sol-gel composite film modified GCE (GNRs@SiO(2)-Mb/RTIL-sol-gel/GCE) through direct electron transfer between Mb and the underlying electrode. This biosensor showed an excellent electrocatalytic activity towards hydrogen peroxide and nitrite. The linear range for the determination of H(2)O(2) was from 0.2 to 180 microM with a detection limit of 0.12 microM based on the signal-to-noise ratio of 3. In addition, the biosensor also exhibited high selectivity, good reproducibility, and long-term stability. Therefore, this kind of composite film can provide an ideal matrix for protein immobilization and biosensor fabrication.

  15. 2-Methyl-sulfanyl-5,6-dihydro-2H-1,3-dithiolo[4,5-b][1,4]dioxin-2-ium tetra-fluoro-borate.

    PubMed

    Zhou, Guoquan; Chen, Xinzhi

    2012-04-01

    The title compound, C(6)H(7)O(2)S(3) (+)·BF(4) (-), consists of a planar 2-thioxo-1,3-dithiol-4,5-yl unit [maximum deviation from the ring plane = 0.020 (3) Å], with an ethyl-enedi-oxy group fused at the 4,5-positions; the ethyl-enedi-oxy C atoms are disordered over two positions with site-occupancy factors of 0.5. The 1,4-dioxine ring has a twist-chair conformation. Weak cation-anion S⋯F inter-actions [3.022 (4)-3.095 (4) Å] and an S⋯O [3.247 (4) Å] inter-action are present.

  16. Removal of tetrafluoroborate ion from aqueous solution using magnesium-aluminum oxide produced by the thermal decomposition of a hydrotalcite-like compound.

    PubMed

    Yoshioka, Toshiaki; Kameda, Tomohito; Miyahara, Motoya; Uchida, Miho; Mizoguchi, Tadaaki; Okuwaki, Akitsugu

    2007-10-01

    Magnesium-aluminum oxide (Mg-Al oxide) prepared by the thermal decomposition of a hydrotalcite-like compound was found to have potential for treating NaBF(4) wastewater. The Mg-Al oxide removed the BF(4)(-) and F(-) and H(3)BO(3) from the NaBF(4) solution. With increasing Mg-Al oxide quantity and time, the BF(4)(-) concentration decreased and the degree of BF(4)(-), F(-), and boron removal increased. The decrease in the BF(4)(-) concentration resulted from uptake by the Mg-Al oxide and not hydrolysis. The Mg-Al oxide took up F(-) from the solution preferentially. The Mg-Al oxide also converted the H(3)BO(3) in the aqueous solution into H(2)BO(3)(-), which it took up.

  17. Effect of water on the solvent relaxation dynamics in an ionic liquid containing microemulsion of 1-butyl-3-methyl imidazolium tetrafluoroborate/TritonX-100/cyclohexane

    NASA Astrophysics Data System (ADS)

    Pramanik, Rajib; Sarkar, Souravi; Ghatak, Chiranjib; Setua, Palash; Rao, Vishal Govind; Sarkar, Nilmoni

    2010-04-01

    The dynamics of solvent and rotational relaxation have been investigated in [bmim][BF 4]/TX-100/cyclohexane microemulsions with addition of water-using steady state and time-resolved fluorescence spectroscopy as a tool and coumarin 480 (C-480) as a fluorescence probe. The added water decreases the size of the microemulsions; consequently solvent relaxation time increases. The rotational relaxation time of C-480 in microemulsions is almost unchanged with increase in amount of water in microemulsions.

  18. Interaction between the ionic liquids 1-alkyl-3-methylimidazolium tetrafluoroborate and Pluronic® P103 in aqueous solution: A DLS, SANS and NMR study

    NASA Astrophysics Data System (ADS)

    Parmar, A.; Aswal, V. K.; Bahadur, P.

    2012-11-01

    The effect of three ionic liquids (ILs) 1-alkyl 3-methyl imidazlolium tetraflouroborates (Cnmim BF4n = 4, 6, 8) on micellar solutions of an ethylene oxide-propylene oxide block copolymer (PEO-PPO-PEO), Pluronic® P103 was examined from scattering and NMR techniques. The ILs alter the cloud point and micelle size dependant on their alkyl chain length and the results are discussed in terms of their behavior as cosolvent/cosurfactant. Cloud point data support the hydrogen bonding between the imidazolium cation and P103 while dynamic light scattering (DLS) and small angle neutron scattering (SANS) reveal that presence of ionic liquid is not conducive to the micelle formation of P103. The selective nuclear Overhauser effect (NOESY) indicates that the PPO block of the P103 interacts with the alkyl group of the Cnmim+ cation by hydrophobic interaction. Through this kind of interactions, Cnmim BF4 and P103 can form mixed micelles. This result indicates that the presence of ILs hinders the micelle formation of P103 in solution and promotes P103 to orient at air/water interface.

  19. Effects of 1-butyl-3-methyl imidazolium tetrafluoroborate ionic liquid on Triton X-100 aqueous micelles: solvent and rotational relaxation studies.

    PubMed

    Pramanik, Rajib; Sarkar, Souravi; Ghatak, Chiranjib; Rao, Vishal Govind; Mandal, Sarthak; Sarkar, Nilmoni

    2011-06-02

    The effect of added room-temperature ionic liquids on the nature of water molecules in the palisade layer of a Triton X-100 (TX-100) micelle has been investigated using solvation and rotational relaxation studies of coumarin 153 in the presence of different wt % of [bmim][BF(4)] and thus to understand the changes in micellar palisade layer, especially the entrapped water structures in the palisade layer. It has been observed that in the presence of added [bmim][BF(4)] the solvation dynamics becomes faster. It has previously been demonstrated (Behera et al. J. Chem. Phys.2007, 127, 184501) that in the present micellar systems, in the presence of [bmim][BF(4)] micellar size and aggregation number (N(agg)) decreases giving rise to more water molecules penetrating in to the micellar phase which results in increased microfluidity. In accordance with solvation dynamics results, fluorescence anisotropy studies also indicate an increased microfluidity for the palisade layer of the TX-100 micelle with the added [bmim][BF(4)]. Wobbling-in-cone analysis of the anisotropy data also supports this finding.

  20. Bottom-up electrochemical preparation of solid-state carbon nanodots directly from nitriles/ionic liquids using carbon-free electrodes and the applications in specific ferric ion detection and cell imaging

    NASA Astrophysics Data System (ADS)

    Niu, Fushuang; Xu, Yuanhong; Liu, Mengli; Sun, Jing; Guo, Pengran; Liu, Jingquan

    2016-03-01

    Carbon nanodots (C-dots), a new type of potential alternative to conventional semiconductor quantum dots, have attracted numerous attentions in various applications including bio-chemical sensing, cell imaging, etc., due to their chemical inertness, low toxicity and flexible functionalization. Various methods including electrochemical (EC) methods have been reported for the synthesis of C-dots. However, complex procedures and/or carbon source-containing electrodes are often required. Herein, solid-state C-dots were simply prepared by bottom-up EC carbonization of nitriles (e.g. acetonitrile) in the presence of an ionic liquid [e.g. 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6)], using carbon-free electrodes. Due to the positive charges of BMIM+ on the C-dots, the final products presented in a precipitate form on the cathode, and the unreacted nitriles and BMIMPF6 can be easily removed by simple vacuum filtration. The as-prepared solid-state C-dots can be well dispersed in an aqueous medium with excellent photoluminescence properties. The average size of the C-dots was found to be 3.02 +/- 0.12 nm as evidenced by transmission electron microscopy. Other techniques such as UV-vis spectroscopy, fluorescence spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy were applied for the characterization of the C-dots and to analyze the possible generation mechanism. These C-dots have been successfully applied in efficient cell imaging and specific ferric ion detection.Carbon nanodots (C-dots), a new type of potential alternative to conventional semiconductor quantum dots, have attracted numerous attentions in various applications including bio-chemical sensing, cell imaging, etc., due to their chemical inertness, low toxicity and flexible functionalization. Various methods including electrochemical (EC) methods have been reported for the synthesis of C-dots. However, complex procedures and/or carbon source-containing electrodes are often

  1. Why is the electroanalytical performance of carbon paste electrodes involving an ionic liquid binder higher than paraffinic binders? A simulation investigation.

    PubMed

    Ghatee, M H; Namvar, S; Zolghadr, A R; Moosavi, F

    2015-10-14

    Recently, carbon paste electrodes (CPE) fabricated using an ionic liquid (IL) binder have shown enhanced electroanalytical performance over conventional paraffinic binders. Molecular dynamics (MD) simulations of graphite mixed with ionic liquid and with paraffin binder can unravel the potential atomistic factors responsible for such enhancement. Based on an experimentally optimized binder/graphite mass ratio, which has been reported to be crucial for such a performance, comprehensive simulations (at 323 K) are performed with the ensembles involving an ionic liquid binder (1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim]PF6) and a paraffin binder (n-C20H42) mixed with graphite comprising large-size hexagonal-shaped double graphene plates. Structural analysis indicates both binders form only a monolayer on the graphite surface, covering the surface locally by IL but all-encompassing by paraffin. With charged and uncharged graphite, the IL monolayer tends to cover mainly the graphite center without approaching the edge planes. On the contrary, a monolayer of the paraffin binder covers uniformly the center, near the center, and the edge planes. Cations and anions of the IL form well-defined two dimensional pentagonal matrixes with characteristic high adsorption energy, almost 2.4 times higher than paraffin adsorption. The cation and anion coordination ability of the IL is responsible for such a local distribution. The simulation of these phenomena under experimental conditions unravels strong two-dimensional coordination properties inherent to the ionic liquid when distributed over the graphite surface. This direct MD simulation comparison of the IL properties with an organic liquid counterpart, made for the first time, can be used to explain the high electroanalytical performance (electron transfer) of CPEs involving an IL binder over paraffin binders.

  2. Aqueous Ionic Liquids and Deep Eutectic Solvents for Cellulosic Biomass Pretreatment and Saccharification

    PubMed Central

    Xia, Shuqian; Baker, Gary A.; Li, Hao; Ravula, Sudhir; Zhao, Hua

    2014-01-01

    Ionic liquids (ILs) have proven effective solvents for pretreating lignocellulose, leading to the fast saccharification of cellulose and hemicellulose. However, the high current cost of most ILs remains a major barrier to commercializing this recent approach at a practical scale. As a strategic detour, aqueous solutions of ILs are also being explored as less costly alternatives to neat ILs for cellulose pretreatment. However, limited studies on a few select IL systems are known and there remains no systematic survey of various ILs, eluding an in-depth understanding of pretreatment mechanisms afforded by aqueous IL systems. As a step toward filling this gap, this study presents results for Avicel cellulose pretreatment by neat and aqueous solutions (1.0 and 2.0 M) of 20 different ILs and three deep eutectic solvents, correlating enzymatic hydrolysis rates of pretreated cellulose with various IL properties such as hydrogen-bond basicity, polarity, Hofmeister ranking, and hydrophobicity. The pretreatment efficiencies of neat ILs may be loosely correlated to the hydrogen-bond basicity of the constituent anion and IL polarity; however, the pretreatment efficacies for aqueous ILs are more complicated and cannot be simply related to any single IL property. Several aqueous IL systems have been identified as effective alternatives to neat ILs in lignocellulose pretreatment. In particular, this study reveals that aqueous solutions of 1-butyl-3-methylimidazolium methanesulfonate ([BMIM][MeSO3]) are effective for pretreating switchgrass (Panicum virgatum), resulting in fast saccharification of both cellulose and hemicellulose. An integrated analysis afforded by X-ray diffraction, scanning electron microscopy, thermogravimetric analysis and cellulase adsorption isotherm of lignocellulose samples is further used to deliver a more complete view of the structural changes attending aqueous IL pretreatment. PMID:24729865

  3. Can dispersion corrections annihilate the dispersion-driven nano-aggregation of non-polar groups? An ab initio molecular dynamics study of ionic liquid systems.

    PubMed

    Firaha, Dzmitry S; Thomas, Martin; Hollóczki, Oldamur; Korth, Martin; Kirchner, Barbara

    2016-11-28

    In this study, we aim at understanding the influence of dispersion correction on the ab initio molecular dynamics simulations of ionic liquid (IL) systems. We investigated a large bulk system of the 1-butyl-3-methylimidazolium triflate IL and a small cluster system of ethylamine in ethylammonium nitrate both under periodic boundary conditions. The large system displays several changes upon neglect of dispersion correction, the most striking one is the surprising decrease of the well-known microheterogeneity which is accompanied by an increase of side chain hydrogen atom-anion interplay. For the diffusion coefficient, we observe a correction towards experimental behavior in terms of the cation becoming faster than the anion with dispersion correction. Changes in the electronic structure upon dispersion correction are reflected in larger/smaller dipole moments for anions/cations also seen in the calculated IR spectrum. The energetics of different ion pair dimer subsystems (polar and non-polar) are in accordance with the analysis of the trajectories: A detailed balance in the ionic liquid system determines its particular behavior. While the overall interaction terms for dispersion-corrected calculations are higher, the decrease in microheterogeneity upon inclusion of dispersion interaction becomes obvious due to the relation between all contributions to polar-polar terms. For the small system, we clearly observe the well known behavior that the hybrid functionals show higher reaction barriers than the pure generalized gradient approximation (GGA) functionals. The correction of dispersion reduces the discrepancies in some cases. Accounting for the number of jumps, we observe that dispersion correction reduces the discrepancies from 50% to less than 10%.

  4. Gold-ionic liquid nanofluids with preferably tribological properties and thermal conductivity

    NASA Astrophysics Data System (ADS)

    Wang, Baogang; Wang, Xiaobo; Lou, Wenjing; Hao, Jingcheng

    2011-12-01

    Gold/1-butyl-3-methylimidazolium hexafluorophosphate (Au/[Bmim][PF6]) nanofluids containing different stabilizing agents were fabricated by a facile one-step chemical reduction method, of which the nanofluids stabilized by cetyltrimethylammonium bromide (CTABr) exhibited ultrahighly thermodynamic stability. The transmission electron microscopy, UV-visible absorption, Fourier transform infrared, and X-ray photoelectron characterizations were conducted to reveal the stable mechanism. Then, the tribological properties of these ionic liquid (IL)-based gold nanofluids were first investigated in more detail. In comparison with pure [Bmim][PF6] and the nanofluids possessing poor stability, the nanofluids with high stability exhibited much better friction-reduction and anti-wear properties. For instance, the friction coefficient and wear volume lubricated by the nanofluid with rather low volumetric concentration (1.02 × 10-3%) stabilized by CTABr under 800 N are 13.8 and 45.4% lower than that of pure [Bmim][PF6], confirming that soft Au nanoparticles (Au NPs) also can be excellent additives for high performance lubricants especially under high loads. Moreover, the thermal conductivity (TC) of the stable nanofluids with three volumetric fraction (2.55 × 10-4, 5.1 × 10-4, and 1.02 × 10-3%) was also measured by a transient hot wire method as a function of temperature (33 to 81°C). The results indicate that the TC of the nanofluid (1.02 × 10-3%) is 13.1% higher than that of [Bmim][PF6] at 81°C but no obvious variation at 33°C. The conspicuously temperature-dependent and greatly enhanced TC of Au/[Bmim][PF6] nanofluids stabilized by CTABr could be attributed to micro-convection caused by the Brownian motion of Au NPs. Our results should open new avenues to utilize Au NPs and ILs in tribology and the high-temperature heat transfer field.

  5. The self-assembled Ru(bpy)3(PF6)2 nanoparticle on polystyrene microfibers and its application for ECL sensing.

    PubMed

    Luo, Jiaojiao; Zhou, Cuisong; Shi, Yalin; Zhang, Lei; Xiao, Dan

    2013-10-21

    Ruthenium nanoparticle tris(2,2'-bipyridyl)ruthenium(II) bis(hexafluorophosphate) (Ru(bpy)3(PF6)2, RuNP) was self-assembled on polystyrene (PS) electrospun microfibers. The formation of RuNP is attributed to the sulfonated PS (SPS) microfibers' high adsorptive capability of 94% for Ru(bpy)3(2+), as well as the strong interaction between the Ru(bpy)3(2+) and ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate, BMIMPF6). The RuNP/SPS microfibers exhibited an enhanced electrochemiluminescence (ECL) emission, 2.3 times higher than that from Ru(bpy)3(2+)/SPS microfibers and 6.6 times higher than that from Ru(bpy)3(2+)/SPS continuous thin films. It is worthy of note that, as a result of the hydrophobic nature of the RuNP, the transfer of water-insoluble α-naphthol is accelerated, and thus the α-naphthol ECL quenching efficiency is enhanced. An ECL sensor based on the RuNP/SPS microfibers was fabricated and used to detect low concentrations of α-naphthol. The detection limit was of 1.0 nM (S/N > 3), and the linear response ranged from 0 to 18 μM. This sensor has been successfully applied to measure the α-naphthol content in pesticide carbaryl samples. Our work provides a very simple and cost-effective method to fabricate RuNP on polymer microfibers with great potential in the field of chemo/biosensors.

  6. Impact of ionic liquid-modified multiwalled carbon nanotubes on the crystallization behavior of poly(vinylidene fluoride).

    PubMed

    Xing, Chenyang; Zhao, Liping; You, Jichun; Dong, Wenyong; Cao, Xiaojun; Li, Yongjin

    2012-07-19

    The impact of pristine multiwalled carbon nanotubes (MWCNTs), an ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6], and the ionic liquid-modified MWCNTs (IL-MWCNTs) on the crystallization behavior of melt-crystallized poly(vinylidene fluoride) (PVDF) has been investigated. Pristine MWCNTs accelerate crystallization of PVDF as an efficient nucleation agent, while the formed crystals are mainly nonpolar α crystal form with few polar β crystals. Incorporation of only ionic liquid results in depression of the PVDF melt crystallization rate due to the miscibility of IL with PVDF but leads to a higher content of polar crystals (β and γ forms) than MWCNTs. The ionic liquid and MWCNTs show significant synergetic effects on both the nucleation and the formation of polar crystals for PVDF by melt crystallization. Addition of IL-MWCNTs not only improves the MWCNTs dispersion in PVDF matrix but also increases the overall crystallization rate of PVDF drastically. More important, the melt-crystallized PVDF nanocomposites with IL-MWCNTs show 100% polar polymorphs but no α crystal forms. To the best of our knowledge, this is the first report on the achievements of full polar crystal form in the melt-crystallized PVDF without mechanical deformation or electric field. The IL to MWCNTs ratio and the IL-MWCNTs loading content effects on the crystallization behavior of PVDF in the nanocomposites were also studied. It is considered that the specific interactions between >CF2 with the planar cationic imidazolium ring wrapped on the MWCNTs surface lead to the full zigzag conformations of PVDF; thus, nucleation in polar crystals (β and γ forms) lattice is achieved and full polar crystals are obtained by subsequent crystal growth from the nuclei.

  7. Aggregation behavior of Triton X-100 with a mixture of two room-temperature ionic liquids: can we identify the mutual penetration of ionic liquids in ionic liquid containing micellar aggregates?

    PubMed

    Rao, Vishal Govind; Mandal, Sarthak; Ghosh, Surajit; Banerjee, Chiranjib; Sarkar, Nilmoni

    2012-11-29

    In this manuscript, we have characterized two different micellar aggregates containing all nonvolatile components. We have shown (i) the effect of ethylammonium nitrate (EAN) addition on the properties of micellar solution of Triton X-100 in 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6)) and (ii) the effect of bmimPF(6) addition on the properties of micellar solution of Triton X-100 in EAN. To investigate the effect, we have used (1)H NMR, pulsed-field gradient spin-echo NMR (PFGSE NMR), and methyl orange (MO) and coumarin 153 (C-153) as absorption and emission probes, respectively. The penetration of added EAN inside the Triton X-100/bmimPF(6) micellar aggregates is indicated by (i) red shift in both the absorption spectra of MO and emission spectra of C-153 and (ii) downfield shift of proton signals of ethylene oxide units in Triton X-100. On the other hand, (1)H NMR and PFGSE NMR indicates the penetration of added bmimPF(6) inside the Triton X-100/EAN micellar aggregates. However, the constancy of both the absorption spectra of MO and emission spectra of C-153 indicates that the microenvironment around the probe molecules remains unaffected. We have also investigated the effect of micelle formation and the effect of penetration of ionic liquids (ILs) in micellar aggregates, on the solvation dynamics of C-153. The solvent relaxation around C-153 gets retarded on going from neat ILs to the micellar solution of Triton X-100 in ILs. In addition to this, we have also observed that with the addition of EAN in Triton X-100/bmimPF(6) micellar aggregates the solvation dynamics becomes faster, whereas with the addition of bmimPF(6) in Triton X-100/EAN micellar aggregates we did not observe any notable change in solvation dynamics. This observation further supports the conclusions drawn from UV-visible and NMR studies.

  8. Gold-ionic liquid nanofluids with preferably tribological properties and thermal conductivity.

    PubMed

    Wang, Baogang; Wang, Xiaobo; Lou, Wenjing; Hao, Jingcheng

    2011-03-28

    Gold/1-butyl-3-methylimidazolium hexafluorophosphate (Au/[Bmim][PF6]) nanofluids containing different stabilizing agents were fabricated by a facile one-step chemical reduction method, of which the nanofluids stabilized by cetyltrimethylammonium bromide (CTABr) exhibited ultrahighly thermodynamic stability. The transmission electron microscopy, UV-visible absorption, Fourier transform infrared, and X-ray photoelectron characterizations were conducted to reveal the stable mechanism. Then, the tribological properties of these ionic liquid (IL)-based gold nanofluids were first investigated in more detail. In comparison with pure [Bmim][PF6] and the nanofluids possessing poor stability, the nanofluids with high stability exhibited much better friction-reduction and anti-wear properties. For instance, the friction coefficient and wear volume lubricated by the nanofluid with rather low volumetric concentration (1.02 × 10-3%) stabilized by CTABr under 800 N are 13.8 and 45.4% lower than that of pure [Bmim][PF6], confirming that soft Au nanoparticles (Au NPs) also can be excellent additives for high performance lubricants especially under high loads. Moreover, the thermal conductivity (TC) of the stable nanofluids with three volumetric fraction (2.55 × 10-4, 5.1 × 10-4, and 1.02 × 10-3%) was also measured by a transient hot wire method as a function of temperature (33 to 81°C). The results indicate that the TC of the nanofluid (1.02 × 10-3%) is 13.1% higher than that of [Bmim][PF6] at 81°C but no obvious variation at 33°C. The conspicuously temperature-dependent and greatly enhanced TC of Au/[Bmim][PF6] nanofluids stabilized by CTABr could be attributed to micro-convection caused by the Brownian motion of Au NPs. Our results should open new avenues to utilize Au NPs and ILs in tribology and the high-temperature heat transfer field.

  9. Evaluation of the Capability of Ionic Liquid-Amino Acid Aqueous Systems for the Formation of Aqueous Biphasic Systems and Their Applications in Extraction.

    PubMed

    Noshadi, Sajjad; Sadeghi, Rahmat

    2017-03-03

    In order to obtain further experimental evidence for better understanding of the molecular mechanisms responsible for the soluting-out effect phenomena in the ternary systems composed of ionic liquid (IL), amino acid and water, systematic studies on the vapor-liquid, liquid-liquid and solid-liquid equilibrium behavior of aqueous solutions of several ILs were carried out in the presence of a range of amino acids. Water activities for binary and ternary aqueous solutions containing 1-butyl-3-methylimidazolium chloride, [C4mim]Cl, 1-hexyl-3-methylimidazolium chloride, [C6mim]Cl, 1-butyl-3-methyl-imidazolium trifluoromethanesulfonate, [C4mim][CF3SO3], l-serine, glycine, alanine, and l-proline were measured using both vapor pressure osmometry and isopiestic methods. All the ternary IL + amino acid + water systems show the negative deviations from the semi-ideal behavior and therefore the soluting-out effects have been seen in these systems. In the case of [C4mim][CF3SO3] + amino acids aqueous systems, the IL is soluted-out by the amino acids and the soluting-out effect appears by aqueous biphasic systems formation. For these systems, the phase diagram and partition coefficient of caffeine were measured at 298.15 K. However, for the [C4mim]Cl and [C6mim]Cl containing systems, the amino acids are soluted-out by the ILs and the soluting-out effect appears by precipitation of the amino acids from the solution and solubilities of the amino acids in aqueous solutions decrease in the presence of [C4mim]Cl and [C6mim]Cl.

  10. Solvothermal Synthesis of Three-Dimensional Hierarchical CuS Microspheres from a Cu-Based Ionic Liquid Precursor for High-Performance Asymmetric Supercapacitors.

    PubMed

    Zhang, Jing; Feng, Huijie; Yang, Jiaqin; Qin, Qing; Fan, Hongmin; Wei, Caiying; Zheng, Wenjun

    2015-10-07

    It is meaningful to exploit copper sulfide materials with desired structure as well as potential application due to their cheapness and low toxicity. A low-temperature and facile solvothermal method for preparing three-dimensional (3D) hierarchical covellite (CuS) microspheres from an ionic liquid precursor [Bmim]2Cu2Cl6 (Bmim = 1-butyl-3-methylimidazolium) is reported. The formation of CuS nanostructures was achieved by decomposition of intermediate complex Cu(Tu)3Cl (thiourea = Tu), which produced CuS microspheres with diameters of 2.5-4 μm assembled by nanosheets with thicknesses of 10-15 nm. The ionic liquid, as an "all-in-one" medium, played a key role for the fabrication and self-assembly of CuS nanosheets. The alkylimidazolium rings ([Bmim](+)) were found to adsorb onto the (001) facets of CuS crystals, which inhibited the crystal growth along the [001] direction, while the alkyl chain had influence on the assembly of CuS nanosheets. The CuS microspheres showed enhanced electrochemical performance and high stability for the application in supercapacitors due to intriguing structural design and large specific surface area. When this well-defined CuS electrode was assembled into an asymmetric supercapacitor (ASC) with an activated carbon (AC) electrode, the CuS//AC-ASC demonstrated good cycle performance (∼88% capacitance after 4000 cycles) and high energy density (15.06 W h kg(-1) at a power density of 392.9 W kg(-1)). This work provides new insights into the use of copper sulfide electrode materials for asymmetric supercapacitors and other electrochemical devices.

  11. Elucidating interactions and conductivity of newly synthesised low bandgap polymer with protic and aprotic ionic liquids.

    PubMed

    Attri, Pankaj; Lee, Seung-Hyun; Hwang, Sun Woo; Kim, Joong I L; Lee, Sang Woo; Kwon, Gi-Chung; Choi, Eun Ha; Kim, In Tae

    2013-01-01

    In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities.

  12. Solubility of alkali metal halides in the ionic liquid [C4C1im][OTf].

    PubMed

    Kuzmina, O; Bordes, E; Schmauck, J; Hunt, P A; Hallett, J P; Welton, T

    2016-06-28

    The solubilities of the metal halides LiF, LiCl, LiBr, LiI, NaF, NaCl, NaBr, NaI, KF, KCl, KBr, KI, RbCl, CsCl, CsI, were measured at temperatures ranging from 298.15 to 378.15 K in the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([C4C1im][OTf]). Li(+), Na(+) and K(+) salts with anions matching the ionic liquid have also been investigated to determine how well these cations dissolve in [C4C1im][OTf]. This study compares the influence of metal cation and halide anion on the solubility of salts within this ionic liquid. The highest solubility found was for iodide salts, and the lowest solubility for the three fluoride salts. There is no outstanding difference in the solubility of salts with matching anions in comparison to halide salts. The experimental data were correlated employing several phase equilibria models, including ideal mixtures, van't Hoff, the λh (Buchowski) equation, the modified Apelblat equation, and the non-random two-liquid model (NRTL). It was found that the van't Hoff model gave the best correlation results. On the basis of the experimental data the thermodynamic dissolution parameters (ΔH, ΔS, and ΔG) were determined for the studied systems together with computed gas phase metathesis parameters. Dissolution depends on the energy difference between enthalpies of fusion and dissolution of the solute salt. This demonstrates that overcoming the lattice energy of the solid matrix is the key to the solubility of inorganic salts in ionic liquids.

  13. Vortex-assisted ionic liquid-based dispersive liquid-liquid microextraction for assessment of chromium species in artificial saliva extract of different chewing tobacco products.

    PubMed

    Akhtar, Asma; Kazi, Tasneem Gul; Afridi, Hassan Imran; Musharraf, Syed Ghulam; Talpur, Farah Naz; Khan, Noman; Bilal, Muhammad; Khan, Mustafa

    2016-12-01

    A novel dispersive liquid-liquid microextraction (ILDLLμE) method using an extracting solvent (ionic liquid) and dispersant (Triton X-114) was developed for the separation and preconcentration of hexavalent chromium (Cr(6+)) in artificial saliva extract (ASE) of chewing tobacco products, gutkha, and mainpuri (n = 23). In the proposed method, the extraction of Cr(6+) was accomplished by using ammonium pyrrolidinedithiocarbamate (APDC) as complexing agent and 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM] [PF6] as extracting solvent. The tiny droplet of metal chelate was then dispersed into TX-114 emulsion, using vortex mixer. Various parameters such as concentration of APDC, pH of the solution, volume of [C4MIM] [PF6], and TX-114 as well as extraction time were studied. Under the most favorable conditions, the limit of detection was found to be 0.068 μg/L with the relative standard deviation <5 %. The enrichment factor of developed method was found as 62.5, and method has been effectively applied for the analysis of Cr species in artificial saliva extract of gutkha and mainpuri products. The Cr(6+) was quantitatively recovered (<97 %) under optimal conditions, while the recovery of trivalent specie (Cr(3+)), at the same experimental conditions, was observed to be <5 %. The Cr(3+) was determined by the difference of total Cr and Cr(6+) in artificial saliva extract of selected STP. Health risks associated with the intake of total Cr in gutkha and mainpuri were assessed in terms of estimated daily intake, such as carcinogenic and noncarcinogenic risks. Estimated daily intake of Cr via chewing 10 g/day of gutkha and mainpuri was found to be below the maximum tolerable daily intake, whereas the calculated risk of cancer for Cr was observed in the acceptable range of 10E(-6)-10E(-4), except some brands of gutkha. Graphical Abstract ᅟ.

  14. Liquid/liquid interface layering of 1-butanol and [bmim]PF6 ionic liquid: a nonlinear vibrational spectroscopy and molecular dynamics simulation study.

    PubMed

    Iwahashi, Takashi; Ishiyama, Tatsuya; Sakai, Yasunari; Morita, Akihiro; Kim, Doseok; Ouchi, Yukio

    2015-10-14

    IR-visible sum-frequency generation (IV-SFG) vibrational spectroscopy and a molecular dynamics (MD) simulation were used to study the local layering order at the interface of 1-butanol-d9 and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF6), a room-temperature ionic liquid (RTIL). The presence of a local non-polar layer at the interface of the two polar liquids was successfully demonstrated. In the SFG spectra of 1-butanol-d9, we observed significant reduction and enhancement in the strength of the CD3 symmetric stretching (r(+)) mode and the antisymmetric stretching (r(-)) mode peaks, respectively. The results can be well explained by the presence of an oppositely oriented quasi-bilayer structure of butanol molecules, where the bottom layer is strongly bound by hydrogen-bonding with the PF6(-) anion. MD simulations reveal that the hydrogen-bonding of butanol with the PF6(-) anion causes the preferential orientation of the butanols; the restriction on the rotational distribution of the terminal methyl group along their C3 axis enhances the r(-) mode. As for the [bmim](+) cations, the SFG spectra taken within the CH stretch region indicate that the butyl chain of [bmim](+) points away from the bulk RTIL phase to the butanol phase at the interface. Combining the SFG spectroscopy and MD simulation results, we propose an interfacial model structure of layering, in which the butyl chains of the butanol molecules form a non-polar interfacial layer with the butyl chains of the [bmim](+) cations at the interface.

  15. Ionic liquids as a key medium for efficient extraction of copper complexes from chia seeds (Salvia hispanica L.).

    PubMed

    Wojcieszek, Justyna; Popowski, Dominik; Ruzik, Lena

    2016-05-15

    Due to insufficient information, the aim of study was to concern on the optimization of extraction procedure of selected metal complexes with flavonoids from chia seeds. Evaluation of the amount of elements in compound, not only their total concentration content, is highly important due to the fact, that only a part from total content of metal is absorbed by human body. At the beginning the total amount of elements in chia seeds was established as 14.51±0.42 µg g(-1) for copper, 57.44±1.23 µg g(-1) for manganese, 81.12±1.89 µg g(-1) for zinc and 0.35±0.13 µg g(-1) for cobalt. After the most suitable solvent was established, effects of several parameters on the efficiency of metal extraction were studied. Solvent concentration, solid-solvent ratio, extraction method, extraction time and temperature have been investigated as independent variables. The optimal extraction conditions included vortexing during 20 min in 50°C, using an ionic liquid (1-butyl-3-methylimidazolium bromide) as an extractant, with solid-solvent ratio of 1:20. The determination of total and extractable amount of metals in chia seeds was carried out by standalone ICP MS. In addition, a complementary analysis of extracted metal complexes was performed using SEC-ICP MS method. It was confirmed that the ionic liquid is able to extract different copper complexes in comparison with commonly used solvents. The study indicated that extraction by using an ionic liquid has been successfully applied for determination of metals and metal complexes in chia seeds.

  16. Development of OPLS-AA Force Field Parameters for 68 Unique Ionic Liquids.

    PubMed

    Sambasivarao, Somisetti V; Acevedo, Orlando

    2009-04-14

    OPLS-AA force field parameters have been developed and validated for use in the simulation of 68 unique combinations of room temperature ionic liquids featuring 1-alkyl-3-methylimidazolium [RMIM] (R = Me, Et, Bu, Hex, Oct), N-alkylpyridinium [RPyr], and choline cations, along with Cl(-), PF6(-), BF4(-), NO3(-), AlCl4(-), Al2Cl7(-), TfO(-), saccharinate, and acesulfamate anions. The new parameters were fit to conformational profiles from gas-phase ab initio calculations at the LMP2/cc-pVTZ(-f)//HF/6-31G(d) theory level and compared to experimental condensed-phase structural and thermodynamic data. Monte Carlo simulations of the ionic liquids gave relative deviations from experimental densities of ca. 1-3% at 25 °C for most combinations and also yielded close agreement over a temperature range of 5 to 90 °C. Predicted heats of vaporization compared well with available experimental data and estimates. Transferability of the new parameters to multiple alkyl side-chain lengths for [RMIM] and [RPyr] was determined to give excellent agreement with charges and torsion potentials developed specific to desired alkyl lengths in 35 separate ionic liquid simulations. As further validation of the newly developed parameters, the Kemp elimination reaction of benzisoxazole via piperidine was computed in 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6] using mixed quantum and molecular mechanics (QM/MM) simulations and was found to give close agreement with the experimental free energy of activation.

  17. Thermodynamical and structural properties of binary mixtures of imidazolium chloride ionic liquids and alcohols from molecular simulation

    NASA Astrophysics Data System (ADS)

    Raabe, Gabriele; Köhler, Jürgen

    2008-10-01

    We have performed molecular dynamics simulations to determine the densities, excess energies of mixing, and structural properties of binary mixtures of the 1-alkyl-3-methylimidazolium chloride ionic liquids (ILs) [amim][Cl] and ethanol and 1-propanol in the temperature range from 298.15to363.15K. As in our previous work [J. Chem. Phys. 128, 154509 (2008)], our simulation studies are based on a united atom model from Liu et al. [Phys. Chem. Chem. Phys. 8, 1096 (2006)] for the 1-ethyl- and 1-butyl-3-methylimidazolium cations [emim+] and [bmim+], which we have extended to the 1-hexyl-3-methylimidazolium [hmim+] cation and combined with parameters of Canongia Lopes et al. [J. Phys. Chem. B 108, 2038 (2004)] for the chloride anion [Cl-] and the force field by Khare et al. for the alcohols [J. Phys. Chem. B 108, 10071 (2004)]. With this, we provide both prediction for the densities of the mixtures that have mostly not been investigated experimentally yet and a molecular picture of the interactions between the alcohol molecules and the ions. The negative excess energies of all mixtures indicate an energetically favorable mixing of [amim][Cl] ILs and alcohols. To gain insight into the nonideality of the mixtures on the molecular level, we analyzed their local structures by radial and spatial distribution functions. These analyses show that the local ordering in these mixtures is determined by strong hydrogen-bond interactions between the chloride anion and the hydroxyls of the alcohols, enhanced interactions between the anion and the charged domain of the cation, and an increasing aggregation of the nonpolar alkyl tails of the alcohols and the cations with increasing cation size, which results in a segregation of polar and nonpolar domains.

  18. Development of a novel naphthoic acid ionic liquid and its application in "no-organic solvent microextraction" for determination of triclosan and methyltriclosan in human fluids and the method optimization by central composite design.

    PubMed

    Wang, Hui; Gao, Jiajia; Yu, Nana; Qu, Jingang; Fang, Fang; Wang, Huili; Wang, Mei; Wang, Xuedong

    2016-07-01

    In traditional ionic liquids (ILs)-based microextraction, the hydrophobic and hydrophilic ILs are often used as extractant and disperser, respectively. However, the functional effects of ILs are not utilized in microextraction procedures. Herein, we introduced 1-naphthoic acid into imidazolium ring to synthesize a novel ionic liquid 1-butyl-3-methylimidazolium naphthoic acid salt ([C4MIM][NPA]), and its structure was characterized by IR, (1)H NMR and MS. On the basis of its acidic property and lower solubility than common [CnMIM][BF4], it was used as a mixing dispersive solvent with [C4MIM][BF4] in "functionalized ionic liquid-based no organic solvent microextraction (FIL-NOSM)". Utilization of [C4MIM][NPA] in FIL-NOSM procedures has two obvious advantages: (1) it promoted the non-polar environment, increased volume of the sedimented phase, and thus could enhance the extraction recoveries of triclosan (TCS) and methyltriclosan (MTCS) by more than 10%; and (2) because of the acidic property, it can act as a pH modifier, avoiding extra pH adjustment step. By combining single factor optimization and central composite design, the main factors in the FIL-NOSM method were optimized. Under the optimal conditions, the relative recoveries of TCS and MTCS reached up to 98.60-106.09%, and the LODs of them were as low as 0.12-0.15µgL(-1) in plasma and urine samples. In total, this [C4MIM][NPA]-based FIL-NOSM method provided high extraction efficiency, and required less pretreatment time and unutilized any organic solvent. To the best of our knowledge, this is the first application of [C4mim][NPA]-based microextraction method for the simultaneous quantification of trace TCS and MTCS in human fluids.

  19. Temperature controlled ionic liquid-based dispersive micro-extraction using two ligands, for determination of aluminium in scalp hair samples of Alzheimer's patients: A multivariate study

    NASA Astrophysics Data System (ADS)

    Arain, Mariam S.; Arain, Salma A.; Kazi, Tasneem G.; Afridi, Hassan I.; Ali, Jamshaid; Naeemulllah; Arain, Sadaf S.; Brahman, Kapil Dev; Mughal, Moina Akhtar

    2015-02-01

    A green and sensitive temperature controlled dispersive liquid-liquid microextraction (TIL-DLLME) methodology based on the application of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim][PF6], as an extractant solvent was proposed for the preconcentration of trace levels of aluminium (Al3+) in scalp hair samples of Alzheimer's (AD) patients, prior to analyzing by flame atomic absorption spectrometry (FAAS). The Al3+ was complexed with 8-hydrooxyquinoline (oxine) (L1) and 3,5,7,2‧-4‧ pentahydroxy flavone (morin) (L2) separately and then extracted by IL at temperature (50 ± 2.0 °C). Some effective factors that influence the TIL-DLLME efficiency such as pH, ligands concentrations, volume of IL, ionic strength, and incubation time were investigated and optimized by multivariate analysis. In the optimum experimental conditions, the limit of detection (3 s) and enhancement factor were 0.56 μg L-1, 0.64 μg L-1 and 85, 73 for both ligands, respectively. The relative standard deviation (RSD) for six replicate determinations of 100 μg L-1 Al3+ complexed with oxine and morin were found to be 3.88% and 4.74%, respectively. The developed method was validated by the analysis of certified reference material of human hair (NCSZC81002).and applied satisfactorily to the determination of Al3+ in acid digested scalp hair samples of AD patients and healthy controls. The resulted data shows significant higher level in scalp hair samples of AD male patients with related to referents of same age and socioeconomic status.

  20. Modulation of cellulase activity by charged lipid bilayers with different acyl chain properties for efficient hydrolysis of ionic liquid-pretreated cellulose.

    PubMed

    Mihono, Kai; Ohtsu, Takeshi; Ohtani, Mai; Yoshimoto, Makoto; Kamimura, Akio

    2016-10-01

    The stability of cellulase activity in the presence of ionic liquids (ILs) is critical for the enzymatic hydrolysis of insoluble cellulose pretreated with ILs. In this work, cellulase was incorporated in the liposomes composed of negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) and zwitterionic phosphatidylcholines (PCs) with different length and degree of unsaturation of the acyl chains. The liposomal cellulase-catalyzed reaction was performed at 45°C in the acetate buffer solution (pH 4.8) with 2.0g/L CC31 as cellulosic substrate. The crystallinity of CC31 was reduced by treating with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at 120°C for 30min. The liposomal cellulase continuously catalyzed hydrolysis of the pretreated CC31 for 48h producing glucose in the presence of 15wt% [Bmim]Cl. The charged lipid membranes were interactive with [Bmim](+), as elucidated by the [Bmim]Cl-induced alterations in fluorescence polarization of the membrane-embedded 1,6-diphenyl-1,3,5-hexatriene (DPH) molecules. The charged membranes offered the microenvironment where inhibitory effects of [Bmim]Cl on the cellulase activity was relieved. The maximum glucose productivity GP of 10.8 mmol-glucose/(hmol-lipid) was obtained at the reaction time of 48h with the cellulase incorporated in the liposomes ([lipid]=5.0mM) composed of 50mol% POPG and 1,2-dilauroyl-sn-glycero-3-phosohocholine (DLPC) with relatively short and saturated acyl chains.

  1. A structural and electrochemical investigation of 1-alkyl-3-methylimidazolium salts of the nitratodioxouranate(VI) anions [[UO2(NO3)2]2(mu 4-C2O4)]2-, [UO2(NO3)3]-, and [UO2(NO3)4]2-.

    PubMed

    Bradley, Antonia E; Hardacre, Christopher; Nieuwenhuyzen, Mark; Pitner, William R; Sanders, David; Seddon, Kenneth R; Thied, Robert C

    2004-04-19

    The properties of the 1-butyl-3-methylimidazolium salt of the dinuclear mu(4)-(O,O,O',O'-ethane-1,2-dioato)bis[bis(nitrato-O,O)dioxouranate(VI)] anion have been investigated using electrochemistry, single-crystal X-ray crystallography, and extended X-ray absorbance fine structure spectroscopy: the anion structures from these last two techniques are in excellent agreement with each other. Electrochemical reduction of the complex leads to the a two-electron metal-centered reduction of U(VI) to U(IV), and the production of UO(2), or a complex containing UO(2). Under normal conditions, this leads to the coating of the electrode with a passivating film. The presence of volatile organic compounds in the ionic liquids 1-alkyl-3-methylimidazolium nitrate (where the 1-alkyl chain was methyl, ethyl, propyl, butyl, pentyl, hexyl, dodecyl, hexadecyl, or octadecyl) during the oxidative dissolution of uranium(IV) oxide led to the formation of a yellow precipitate. To understand the effect of the cation upon the composition and structure of the precipitates, 1-alkyl-3-methylimidazolium salts of a number of nitratodioxouranate(VI) complexes were synthesized and then analyzed using X-ray crystallography. It was demonstrated that the length of the 1-alkyl chain played an important role, not only in the composition of the complex salt, but also in the synthesis of dinuclear anions containing the bridging mu(4)-(O,O,O',O'-ethane-1,2-dioato), or oxalato, ligand, by protecting it from further oxidation.

  2. Renewable feedstocks in green solvents: thermodynamic study on phase diagrams of D-sorbitol and xylitol with dicyanamide based ionic liquids.

    PubMed

    Paduszyński, Kamil; Okuniewski, Marcin; Domańska, Urszula

    2013-06-13

    Experimental and theoretical studies on thermodynamic properties of three ionic liquids based on dicyanamide anion (namely, 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-1-methylpyrrolidinium dicyanamide, and 1-butyl-1-methylpiperidinium dicyanamide) and their binary mixtures with sugar alcohols (D-sorbitol and xylitol) were conducted in order to assess the applicability of the salts ionic liquids for dissolution of those biomass-related materials. Density and dynamic viscosity (at ambient pressure) of pure ionic liquids are reported in the temperature range from T = 293.15 to 363.15 K. Solid-liquid equilibrium phase diagrams in binary systems {sugar alcohol + ionic liquid} were measured with dynamic method up to the fusion temperature of sugar alcohol. The impact of the chemical structure of both the ionic liquid and sugar alcohol were established and discussed. For the very first time, the experimental solubility data were reproduced and analyzed in terms of equation of state rooted in statistical mechanics. For this purpose, perturbed-chain statistical associating fluid theory (PC-SAFT) was employed. In particular, new molecular schemes for the ionic liquids, D-sorbitol, and xylitol were proposed, and then the pure chemicals were parametrized by using available density and vapor pressure data. The model allowed accurate correlation of pure fluid properties for both ionic liquids and sugar alcohols, when the association term is taken into account. The results of solid-liquid equilibria modeling were also satisfactory. However, one or two adjustable binary corrections to the adopted combining rules were required to be adjusted in order to accurately capture the phase behavior. It was shown that a consistent thermodynamic description of extremely complex systems can be achieved by using relatively simple (but physically grounded) theoretical tools and molecular schemes.

  3. Density and Viscosity of Binary Mixtures of Thiocyanate Ionic Liquids + Water as a Function of Temperature.

    PubMed

    Domańska, U; Królikowska, M

    2012-09-01

    Densities and viscosities have been determined for binary mixtures of the ionic liquids (ILs) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-butyl-4-methylpyridinium thiocyanate [BMPy][SCN], or 1-butyl-1-methylpyrrolidinium thiocyanate [BMPYR][SCN], or 1-butyl-1-methylpiperidinium thiocyanate [BMPIP][SCN] with water over wide range of temperatures (298.15-348.15) K and ambient pressure. The thermal properties of [BMPy][SCN], i.e. glass transition temperature and the heat capacity at glass transition, have been measured using a differential scanning microcalorimetry, DSC. The decomposition of [BMPy][SCN] was detected. The density and viscosity correlations for these systems have been made using an empirical second-order polynomial and by the Vogel-Fulcher-Tammann equation, respectively. The concentration dependences have been described by polynomials. The excess molar volumes and deviations in viscosity have been calculated from the experimental values and were correlated by Redlich-Kister polynomial expansions. The variations of these parameters, with compositions of the mixtures and temperature, have been discussed in terms of molecular interactions. A qualitative analysis of the trend of properties with composition and temperature was performed. Further, the excess partial molar volumes, [Formula: see text] and [Formula: see text], were calculated and discussed. The isobaric expansivities (coefficient of thermal expansion), α, and the excess isobaric expansivities, α(E), were determined for four ILs and their mixtures with water. The results indicate that the interactions of thiocyanate ILs with water is not as strong as with alcohols, which is shown by the positive/slightly negative excess molar volumes in these binary systems. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s10953-012-9875-7) contains supplementary material, which is available to authorized users.

  4. Solvation of uranyl-CMPO complexes in dry vs. humid forms of the [BMI][PF6] ionic liquid. A molecular dynamics study.

    PubMed

    Chaumont, Alain; Wipff, Georges

    2006-01-28

    The solvation of the [UO(2)(NO(3))(CMPO)](+) and [UO(2)(NO(3))(2)(CMPO)(2)] complexes (CMPO = octyl(phenyl)-N,N-diisobutylmethylcarbamoyl phosphine oxide) is investigated by molecular dynamics in the "dry" and "humid" forms of a room temperature ionic liquid (IL) based on the 1-butyl-3-methylimidazolium (BMI(+)) cation and the hexafluorophosphate (PF(6)(-)) anion. The simulations reveal the importance of the solvent anions in "dry" conditions and of water molecules in the "humid" solvent. For the [UO(2)(NO(3))(CMPO)](+) complex, the monodentate vs. bidentate coordination modes of CMPO are compared, and the first solvation shell of uranyl is completed by 1-3 PF(6)(-) anions in the dry IL and by 2-3 water molecules in the humid IL, leading to a total coordination number close to 5. The energy analysis shows that interactions with the IL stabilize the [UO(2)(NO(3))(bi)(CMPO)(mono)](+) form (with bidentate nitrate and monodentate CMPO) in the dry IL and the [UO(2)(NO(3))(mono)(CMPO)(mono)](+) form (with monodentate nitrate and CMPO) in the humid IL. The extracted compound characterized by EXAFS is thus proposed to be the [UO(2)(NO(3))(mono)(CMPO)(mono)(H(2)O)(3)](+) species. Furthermore we compare the [UO(2)(NO(3))(2)(CMPO)(2)] complex in its associated and dissociated forms ([UO(2)(NO(3))(mono)(CMPO)(mono)](+) + CMPO + NO(3)(-)) and discuss the results in the context of uranyl extraction by CMPO to ionic liquids.

  5. Ion yields for some salts in MALDI: mechanism for the gas-phase ion formation from preformed ions.

    PubMed

    Moon, Jeong Hee; Shin, Young Sik; Bae, Yong Jin; Kim, Myung Soo

    2012-01-01

    Preformed ion emission is the main assumption in one of the prevailing theories for peptide and protein ion formation in matrix-assisted laser desorption ionization (MALDI). Since salts are in preformed ion forms in the matrix-analyte mixture, they are ideal systems to study the characteristics of preformed ion emission. In this work, a reliable method to measure the ion yield (IY) in MALDI was developed and used for a solid salt benzyltriphenylphosphonium chloride and two room-temperature ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate and trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate. IY for the matrix (α-cyano-4-hydroxycinnamic acid, CHCA) was also measured. Taking 1 pmol salts in 25 nmol CHCA as examples, IYs for three salts were similar, (4-8) × 10(-4), and those for CHCA were (0.8-1.2) × 10(-7). Even though IYs for the salts and CHCA remained virtually constant at low analyte concentration, they decreased as the salt concentrations increased. Two models, Model 1 and Model 2, were proposed to explain low IYs for the salts and the concentration dependences. Both models are based on the fact that the ion-pair formation equilibrium is highly shifted toward the neutral ion pair. In Model 1, the gas-phase analyte cations were proposed to originate from the same cations in the solid that were dielectrically screened from counter anions by matrix neutrals. In Model 2, preformed ions were assumed to be released from the solid sample in the form of neutral ion pairs and the anions in the ion pairs were assumed to be eliminated via reactions with matrix-derived cations.

  6. Rational Design of Bi Nanoparticles for Efficient Electrochemical CO2 Reduction: The Elucidation of Size and Surface Condition Effects

    DOE PAGES

    Zhang, Zhiyong; Chi, Miaofang; Veith, Gabriel M.; ...

    2016-08-08

    Here we report an efficient electrochemical conversion of CO2 to CO on surface-activated bismuth nanoparticles (NPs) in acetonitrile (MeCN) under ambient conditions, with the assistance of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([bmim][OTf]). Through the comparison between electrodeposited Bi films (Bi-ED) and different types of Bi NPs, we, for the first time, demonstrate the effects of catalyst’s size and surface condition on organic phase electrochemical CO2 reduction. Our study reveals that the surface inhibiting layer (hydrophobic surfactants and Bi3+ species) formed during the synthesis and purification process hinders the CO2 reduction, leading to a 20% drop in Faradaic efficiency for CO evolution (FECO). Bimore » particle size showed a significant effect on FECO when the surface of Bi was air-oxidized, but this effect of size on FECO became negligible on surface-activated Bi NPs. After the surface activation (hydrazine treatment) that effectively removed the native inhibiting layer, activated 36-nm Bi NPs exhibited an almost-quantitative conversion of CO2 to CO (96.1% FECO), and a mass activity for CO evolution (MACO) of 15.6 mA mg–1, which is three-fold higher than the conventional Bi-ED, at ₋2.0 V (vs Ag/AgCl). Ultimately, this work elucidates the importance of the surface activation for an efficient electrochemical CO2 conversion on metal NPs and paves the way for understanding the CO2 electrochemical reduction mechanism in nonaqueous media.« less

  7. Rational Design of Bi Nanoparticles for Efficient Electrochemical CO2 Reduction: The Elucidation of Size and Surface Condition Effects

    SciTech Connect

    Zhang, Zhiyong; Chi, Miaofang; Veith, Gabriel M.; Zhang, Pengfei; Lutterman, Daniel A.; Rosenthal, Joel; Overbury, Steven H.; Dai, Sheng; Zhu, Huiyuan

    2016-08-08

    Here we report an efficient electrochemical conversion of CO2 to CO on surface-activated bismuth nanoparticles (NPs) in acetonitrile (MeCN) under ambient conditions, with the assistance of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([bmim][OTf]). Through the comparison between electrodeposited Bi films (Bi-ED) and different types of Bi NPs, we, for the first time, demonstrate the effects of catalyst’s size and surface condition on organic phase electrochemical CO2 reduction. Our study reveals that the surface inhibiting layer (hydrophobic surfactants and Bi3+ species) formed during the synthesis and purification process hinders the CO2 reduction, leading to a 20% drop in Faradaic efficiency for CO evolution (FECO). Bi particle size showed a significant effect on FECO when the surface of Bi was air-oxidized, but this effect of size on FECO became negligible on surface-activated Bi NPs. After the surface activation (hydrazine treatment) that effectively removed the native inhibiting layer, activated 36-nm Bi NPs exhibited an almost-quantitative conversion of CO2 to CO (96.1% FECO), and a mass activity for CO evolution (MACO) of 15.6 mA mg–1, which is three-fold higher than the conventional Bi-ED, at ₋2.0 V (vs Ag/AgCl). Ultimately, this work elucidates the importance of the surface activation for an efficient electrochemical CO2 conversion on metal NPs and paves the way for understanding the CO2 electrochemical reduction mechanism in nonaqueous media.

  8. Mesoscopic simulation of a micellar poly(N-isopropyl acrylamide)-b-(polyethylene oxide) copolymer system

    NASA Astrophysics Data System (ADS)

    Bautista-Reyes, Rubén; Soto-Figueroa, César; Vicente, Luis

    2016-05-01

    In this article we studied the micellar formation of poly(N-isopropyl acrylamide)-b-polyethylene oxide (PNIPAM-b-PEO) copolymers in an aqueous system. From molecular simulations the dependence on temperature of the Flory-Huggins interaction parameter χ for PNIPAM and PEO in water is obtained and compared with available experimental results and values from other theoretical calculations. By means of dissipative particle dynamics (DPD) we then simulated the coil-globule transition for PNIPAM chains in water with a transition temperature of around 305 K. The simulations for PNIPAM-b-PEO copolymers showed that at room temperature the chains are miscible in an aqueous phase but with a temperature increase the system turns into micelles at T  =  305 K. The change in micelle anisotropy due to a different ratio PNIPAM/PEO of chains is also analyzed. What is observed is that for large PEO the large number of dissolved PEO chains gives a large corona size and the micelle is not spherical but obloide and as the number of PNIPAM is increased the micelle acquires a spherical shape. As an important application we considered the system micelle-water/anionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate [BMIM]+[PF6]-). By increasing the temperature of the system from 306 K it is shown that at T  =  345 K there is a transfer of the micelle from water to the ionic liquid phase and this was due to the change in the relative affinity of PEO to water and ionic liquid expressed by the change in χ. All the simulation outcomes are qualitatively consistent with experimental results and thus to our knowledge we give the first set of χ values for the interaction between PNIPAM and water in a wide range of temperature values.

  9. Rapid ionic liquid-based ultrasound assisted dual magnetic microextraction to preconcentrate and separate cadmium-4-(2-thiazolylazo)-resorcinol complex from environmental and biological samples.

    PubMed

    Khan, Sumaira; Kazi, Tasneem Gul; Soylak, Mustafa

    2014-04-05

    A rapid and innovative microextraction technique named as, ionic liquid-based ultrasound-assisted dual magnetic microextraction (IL-UA-DMME) was developed for the preconcentration and extraction of trace cadmium from environmental and biological samples, prior to analyzed by flame atomic absorption spectrometry (FAAS). The proposed method has many obvious advantages, including evading the use of organic solvents and achieved high extraction yields by the combination of dispersive liquid-liquid microextraction (DLLME) and magnetic mediated-solid phase extraction (MM-SPE). In this approach ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate [C4mim][PF6] play an important role to extract the cadmium-4-(2-thiazolylazo)-resorcinol (Cd-TAR) complex from acid digested sample solutions and ultrasonic irradiation was applied to assist emulsification. After then, dispersed small amount of Fe3O4 magnetic nanoparticles (MNPs) in sample solutions to salvaged the IL and complete phase separation was attained. Some analytical parameters that influencing the efficiency of proposed (IL-UA-DMME) method, such as pH, volume of IL, ligand concentration, ultra-sonication time, amount of Fe3O4 MNPs, sample volume and matrix effect were optimized. Limit of detection (LOD) and enrichment factor (EF) of the method under optimal experimental conditions were found to be 0.40μgL(-1) and 100, respectively. The relative standard deviation (RSD) of 50μgL(-1) Cd was 4.29%. The validity and accuracy of proposed method, was assessed to analyzed certified reference materials of fortified lake water TMDA-54.4, SPS-WW2 waste water, spinach leaves 1570a and also checked by standard addition method. The obtained values showed good agreement with the certified values and sufficiently high recovery were found in the range of 98.1-101% for Cd. The proposed method was facile, rapid and successfully applied for the determination of Cd in environmental and different biological samples.

  10. Elucidating Interactions and Conductivity of Newly Synthesised Low Bandgap Polymer with Protic and Aprotic Ionic Liquids

    PubMed Central

    Attri, Pankaj; Lee, Seung-Hyun; Hwang, Sun Woo; Kim, Joong I. L.; Lee, Sang Woo; Kwon, Gi-Chung; Choi, Eun Ha; Kim, In Tae

    2013-01-01

    In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities. PMID:23874829

  11. Universality of Viscosity Dependence of Translational Diffusion Coefficients of Carbon Monoxide, Diphenylacetylene, and Diphenylcyclopropenone in Ionic Liquids under Various Conditions.

    PubMed

    Kimura, Y; Kida, Y; Matsushita, Y; Yasaka, Y; Ueno, M; Takahashi, K

    2015-06-25

    Translational diffusion coefficients of diphenylcyclopropenone (DPCP), diphenylacetylene (DPA), and carbon monoxide (CO) in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIm][NTf2]) and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([EMIm][NTf2]) were determined by the transient grating (TG) spectroscopy under pressure from 0.1 to 200 MPa at 298 K and from 298 to 373 K under 0.1 MPa. Diffusion coefficients of these molecules at high temperatures in tributylmethylphosphonium bis(trifluoromethanesulfonyl)imide ([P4441][NTf2]), and tetraoctylphosphonium bis(trifluoromethanesulfonyl)imide ([P8888][NTf2]), and also in the mixtures of [BMIm][NTf2], N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide ([Pp13][NTf2]), and trihexyltetradecylphosphonium bis(trifluoromethanesulfonyl)imide ([P66614][NTf2]) with ethanol or chloroform have been determined. Diffusion coefficients except in ILs of phosphonium cations were well scaled by the power law of T/η, i.e., (T/η)(P), where T and η are the absolute temperature and the viscosity, irrespective of the solvent species, pressure and temperature, and the compositions of mixtures. The values of the exponent P were smaller for the smaller size of the molecules. On the other hand, the diffusion coefficients in ILs of phosphonium cations with longer alkyl chains were larger than the values expected from the correlation obtained by other ILs and conventional liquids. The deviation becomes larger with increasing the number of carbon atoms of alkyl-chain of cation, and with decreasing the molecular size of diffusing molecules. The molecular size dependence of the diffusion coefficient was correlated by the ratio of the volume of the solute to that of the solvent as demonstrated by the preceding work (Kaintz et al., J. Phys. Chem. B 2013 , 117 , 11697 ). Diffusion coefficients have been well correlated with the power laws of both T/η and the relative volume of the solute to the solvent.

  12. Dual-Frequency Alternating Current Designer Waveform for Reliable Voltammetric Determination of Electrode Kinetics Approaching the Reversible Limit.

    PubMed

    Li, Jiezhen; Bentley, Cameron L; Bond, Alan M; Zhang, Jie

    2016-02-16

    Alternating current (ac) voltammetry provides access to faster electrode kinetics than direct current (dc) methods. However, difficulties in ac and other methods arise when the heterogeneous electron-transfer rate constant (k(0)) approaches the reversible limit, because the voltammetric characteristics become insensitive to electrode kinetics. Thus, in this near-reversible regime, even small uncertainties associated with bulk concentration (C), diffusion coefficient (D), electrode area (A), and uncompensated resistance (Ru) can lead to significant systematic error in the determination of k(0). In this study, we have introduced a kinetically sensitive dual-frequency designer waveform into the Fourier-transformed large-amplitude alternating current (FTAC) voltammetric method that is made up of two sine waves having the same amplitude but with different frequencies (e.g., 37 and 615 Hz) superimposed onto a dc ramp to quantify the close-to-reversible Fc(0/+) process (Fc = ferrocene) in two nonhaloaluminate ionic liquids. The concept is that from a single experiment the lower-frequency data set, collected on a time scale where the target process is reversible, can be used as an internal reference to calibrate A, D, C, and Ru. These calibrated values are then used to calculate k(0) from analysis of the harmonics of the higher-frequency data set, where the target process is quasi-reversible. With this approach, k(0) values of 0.28 and 0.11 cm·s(-1) have been obtained at a 50 μm diameter platinum microdisk electrode for the close-to-diffusion-controlled Fc(0/+) process in two ionic liquids, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, respectively.

  13. A hydrophobic ionic liquid compartmentalized sampling/labeling and its separation techniques in polydimethylsiloxane microchip capillary electrophoresis.

    PubMed

    Quan, Hong Hua; Li, Ming; Huang, Yan; Hahn, Jong Hoon

    2017-01-01

    This paper demonstrates a novel compartmentalized sampling/labeling method and its separation techniques using a hydrophobic ionic liquid (IL)-1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imidate (BmimNTf2 )-as the immiscible phase, which is capable of minimizing signal losses during microchip capillary electrophoresis (MCE). The MCE device consists of a silica tube connected to a straight polydimethylsiloxane (PDMS) separation channel. Poly(diallyldimethylammonium chloride) (PDDAC) was coated on the inner surface of channel to ease the introduction of IL plugs and enhance the IL wetting on the PDMS surface for sample releasing. Electroosmotic flow (EOF)-based sample compartmentalization was carried out through a sequenced injection into sampling tubes with the following order: leading IL plug/sample segment/terminal IL plug. The movement of the sample segment was easily controlled by applying an electrical voltage across both ends of the chip without a sample volume change. This approach effectively prevented analyte diffusion before injection into MCE channels. When the sample segment was ma