Science.gov

Sample records for 1-light sash windows

  1. 15. BATHROOM INTERIOR SHOWING ILIGHT OVER 1LIGHT SASH WINDOW AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. BATHROOM INTERIOR SHOWING I-LIGHT OVER 1-LIGHT SASH WINDOW AT PHOTO CENTER, AND BUILT-IN CABINET OVER TOILET AT PHOTO LEFT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  2. INTERIOR DETAIL OF THE SIXOVERSIXLIGHT DOUBLEHUNG SASH WINDOWS. NOTE THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL OF THE SIX-OVER-SIX-LIGHT DOUBLE-HUNG SASH WINDOWS. NOTE THE TOP OF THE UPPER SASH EXTENDS ABOVE THE DROPPED CEILING. VIEW FACING EAST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI

  3. INTERIOR DETAIL, TYPICAL SIX OVER SIX SASH WINDOW IN SOUTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL, TYPICAL SIX OVER SIX SASH WINDOW IN SOUTHWEST CORNER ROOM; VIEW TO WEST - Fort Bragg, Noncommissioned Officers' Service Club, Guest House Building, South of Butner Road, Fayetteville, Cumberland County, NC

  4. 10. VIEW OF THE ARCHED TRIPARTITE STEEL SASH WINDOW OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW OF THE ARCHED TRIPARTITE STEEL SASH WINDOW OF THE 2ND FLOOR WITH CAST IRON MOLDED PANEL BELOW AT FRONT ELEVATION. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  5. 22. DETAIL INTERIOR VIEW OF OFFICE, SHOWING ORIGINAL SASH WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. DETAIL INTERIOR VIEW OF OFFICE, SHOWING ORIGINAL SASH WINDOWS AND DUCT WORK (OTHER OFFICE INTERIORS ARE GREATLY ALTERED FROM THE ORIGINAL) - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

  6. DETAIL OF ORIGINAL SIXOVERSIXLIGHT DOUBLEHUNG SASH WINDOWS WITH GRADUATED SCALE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF ORIGINAL SIX-OVER-SIX-LIGHT DOUBLE-HUNG SASH WINDOWS WITH GRADUATED SCALE IN 1' INCREMENTS. VIEW FACING NORTHWEST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI

  7. Thermally insulated window sash construction for a casement window

    SciTech Connect

    Biro, A.J.

    1987-09-01

    A window sash member is described comprising: first and second generally parallel sidewalls; first and second spaced, generally parallel transverse walls connecting the first and second sidewalls, extending between and oriented generally perpendicular to the first and second sidewalls to define a first hollow chamber; a third transverse wall, located without the first hollow chamber adjacent to and generally parallel to the first transverse wall, extending from the first sidewall and terminating short of the second sidewall; a first interior wall extending from the third transverse wall to the first transverse wall and oriented generally parallel to the first sidewall to define a second hollow chamber; a fourth transverse wall, located without the first hollow chamber adjacent to and generally to the second transverse wall, extending from the first sidewall and terminating short of the second sidewall; and a second interior wall extending from the fourth transverse wall to the second transverse wall and oriented generally parallel to the second sidewall to define a third hollow chamber.

  8. 12. INTERIOR OF WALKIN CLOSET SHOWING 1LIGHT OVER 1 LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. INTERIOR OF WALK-IN CLOSET SHOWING 1-LIGHT OVER 1 LIGHT SASH WINDOW ON REAR (WEST) WALL. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  9. 17. INTERIOR OF BEDROOM NUMBER TWO WALKIN CLOSET SHOWING 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. INTERIOR OF BEDROOM NUMBER TWO WALK-IN CLOSET SHOWING 1-LIGHT OVER 1-LIGHT SASH WINDOW ON NORTH WALL. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  10. 29. INTERIOR OF PANTRY SHOWING ORIGINAL SHELVES, PLUMBING, AND 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. INTERIOR OF PANTRY SHOWING ORIGINAL SHELVES, PLUMBING, AND 1-LIGHT OVER 1-LIGHT SASH WINDOW. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  11. 13. INTERIOR OF BEDROOM NUMBER ONE SHOWING 6LIGHT OVER 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR OF BEDROOM NUMBER ONE SHOWING 6-LIGHT OVER 1-LIGHT SASH WINDOW ON EAST (FRONT) WALL. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  12. 25. INTERIOR OF BEDROOM NUMBER FOUR SHOWING 6LIGHT OVER 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. INTERIOR OF BEDROOM NUMBER FOUR SHOWING 6-LIGHT OVER 1-LIGHT SASH WINDOWS THROUGH SOUTH (PHOTO LEFT) AND WEST (PHOTO RIGHT) WALLS. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  13. 19. INTERIOR OF BEDROOM NUMBER TWO SHOWING 6LIGHT OVER 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. INTERIOR OF BEDROOM NUMBER TWO SHOWING 6-LIGHT OVER 1-LIGHT SASH WINDOWS ON THE NORTH (PHOTO LEFT) AND EAST (PHOTO RIGHT) WALLS. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  14. 20. INTERIOR OF SIDEENTRY UTILITY ROOM SHOWING OPEN 1 LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. INTERIOR OF SIDE-ENTRY UTILITY ROOM SHOWING OPEN 1 LIGHT SIDE-EXIT DOOR AT PHOTO LEFT AND 1-LIGHT OVER 1 LIGHT SASH WINDOW INTO PANTRY AT PHOTO RIGHT. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  15. 19. INTERIOR OF SIDEENTRY UTILITY ROOM SHOWING OPEN 1LIGHT SIDEEXIT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. INTERIOR OF SIDE-ENTRY UTILITY ROOM SHOWING OPEN 1LIGHT SIDE-EXIT DOOR AT PHOTO LEFT AND 1-LIGHT OVER 1 LIGHT SASH WINDOW INTO PANTRY AT PHOTO RIGHT. ALCOVE AT PHOTO CENTER WAS ORIGINALLY DESIGNED TO BE A BROOM CLOSET. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  16. Sound isolation performance of interior acoustical sash

    NASA Astrophysics Data System (ADS)

    Tocci, Gregory

    2002-05-01

    In existing, as well as new buildings, an interior light of glass mounted on the inside of a prime window is used to improve the sound transmission loss otherwise obtained by the prime window alone. Interior acoustical sash is most often 1/4 in. (6 mm) monolithic or laminated glass, and is typically spaced 3 in. to 6 in. from the glass of the prime window. This paper presents TL data measured at Riverbank Acoustical Laboratories by Solutia (formerly Monsanto) for lightweight prime windows of various types, with and without interior acoustical sash glazed with 1/4 in. laminated glass. The TL data are used to estimate the A-weighted insertion loss of interior acoustical sash when applied to prime windows glazed with lightweight glass for four transportation noise source types-highway traffic, aircraft, electric rail, and diesel rail. The analysis also has been extended to determine the insertion loss expressed as a change in OITC. The data also exhibit the reductions in insertion loss that can result from short-circuiting the interior acoustical sash with the prime window. [Work supported by Solutia, Inc.

  17. 48. Interior detail, study, doublehung sash in the south wall. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. Interior detail, study, double-hung sash in the south wall. Most of the windows in the John Bartram House were replaced sometime in the first decades of the nineteenth century. This window contains a slightly wider muntin profile than the later sash and is probably representative of the windows used in phase III construction (Mid-1750's-1770). - John Bartram House & Garden, House, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

  18. 18. INTERIOR OF BEDROOM NUMBER TWO SHOWING 6LIGHT OVER 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. INTERIOR OF BEDROOM NUMBER TWO SHOWING 6-LIGHT OVER 1-LIGHT SASH WINDOW ON EAST (FRONT) WALL AT PHOTO LEFT, AND OPEN DOORWAY TO BEDROOM NUMBER ONE AT PHOTO RIGHT. VIEW TO EAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  19. Sliding window construction

    SciTech Connect

    Klompenburg, M.V.

    1987-07-28

    A window assembly is described in a window frame. The frame includes a head, a sill, and opposite jambs, the assembly comprising: first and second sashes each having interior and exterior surfaces, a top, a bottom, and opposite first and second sides extending between the top and the bottom: the first sash being laterally movably within the window frame between a closed position and an open position wherein the first sash is substantially in a non-planar position relative to the second sash; track means extending along one of the sill or head of the window frame; first track follower means connected to one of the top or the bottom of the first sash adjacent the first side and cooperating with the track means for supporting and guiding the first sash during lateral movement between the open and closed positions; and the track means having an opening for releasing the track follower means for cooperation only when the first sash is in the open position such that the first sash is pivotal about a vertical axis adjacent the second side between the open position and a maintenance position.

  20. 30. BEDROOM #3 INTERIOR SHOWING 1 LIGHT OVER 1 LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. BEDROOM #3 INTERIOR SHOWING 1 LIGHT OVER 1 LIGHT WINDOW ON EAST WALL AND PARTIALLY OPENED DOOR TO WINDOWED CLOSET. VIEW TO EAST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA

  1. Magnetospheric sash dependence on IMF direction

    NASA Astrophysics Data System (ADS)

    Siscoe, G. L.; Erickson, G. M.; Ö Sonnerup, B. U.; Maynard, N. C.; Siebert, K. D.; Weimer, D. R.; White, W. W.

    The magnetospheric sash is a ribbon of weak field shaped like a horseshoe with its open ends adjacent to the north and south dayside, magnetopause cusps and its closed end forming the cross-tail current sheet. The clock angle of the sash in the dawn-dusk meridian plane (as seen from the sun) rotates from 0° to 90° as the clock angle of the interplanetary magnetic field (IMF) rotates from 0° to 180°. We use a global MHD simulation to obtain the sash clock angles for IMF clock angles of 45°, 90°, and 135°. Remarkably, the results are very close to the clock angle of the magnetic null points obtained by superposing a uniform field representing the IMF on a dipole field representing the earth. Contours of magnetic field strength on cross sections perpendicular to the solar wind flow direction show how the sash evolves tailward from the dayside cusps.

  2. 22. DETAIL OF TRIPLE WINDOW, SOUTHEAST ROOM, FIRST FLOOR. Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. DETAIL OF TRIPLE WINDOW, SOUTHEAST ROOM, FIRST FLOOR. Typical for all triple windows on first and second floors. Single swing jib door under center sash opening out. Door thickness measures from flush with exterior siding to 3/4' inside bottom sash. See also Photo 12. SC-291-12. - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  3. Study of how sash movement affects performance of fume hoods

    SciTech Connect

    Hardwick, T.

    1997-12-31

    This study was conducted to determine how sash movements affect the performance of fume hoods. The performance of two fume hoods was studied as the sashes were moved from closed to open position at speeds of 2 ft/s, 1.5 ft/s, and 1 ft/s. The tests were conducted with fume hoods operated at both constant volume and variable air volume. The tests indicate that sash movements can disturb airflow patterns at the face of the hood and potentially affect the performance of the hood. The effect of the sash movement varied with hood type and speed of sash movement. The faster sash movements of 2 ft/s and 1.5 ft/s had a greater effect on the performance of the hoods than the slower movement of 1 ft/s. Constant-volume hoods and variable-air-volume hoods were both affected by sash movements. Constant-volume hoods set to a full open face velocity of 60 ft/min were more susceptible to the sash movement than at 100 ft/min full open face velocity. The performance of variable-air-volume hoods is affected not only by sash movement speed but also by the response time of the controller. The drop in face velocity that occurs when the sash is moved is determined by the speed of the VAV controller. The required response time for containment depends on the fume hood design and the speed of the sash movement.

  4. 21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH HOLLOW STEEL SASH AND POLISHED PLATE WIRE GLASS. THIS WINDOW IS AT THE FRONT OF THE BUILDING. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  5. 33. INTERIOR OF BEDROOM NO. 4 SHOWING 1LIGHT OVER 1LIGHT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. INTERIOR OF BEDROOM NO. 4 SHOWING 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOWS. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA

  6. 22. INTERIOR OR BEDROOM NO. 1 SHOWING 1LIGHT OVER 1LIGHT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. INTERIOR OR BEDROOM NO. 1 SHOWING 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOW ON EAST WALL. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA

  7. The Magnetospheric Sash and the Cross-Tail S

    NASA Astrophysics Data System (ADS)

    White, Willard W.; Siscoe, George L.; Erickson, Gary M.; Kaymaz, Zerefsan; Maynard, Nelson C.; Siebert, Keith D.; Sonnerup, Bengt U. Ö.; Weimer, Daniel R.

    As revealed in MHD simulation, the magnetospheric sash is a band of weak magnetic field that, for the usual case in which the IMF is approximately perpendicular to the geomagnetic dipole, runs tailward along the high-latitude magnetopause flanks from one dayside cusp to the other, closing via the cross-tail neutral sheet. On the magnetopause flanks, it contains the magnetic separator line, at which all three topological types of field lines meet. Seen in a cross-sectional plane through the near-Earth tail, the magnetospheric sash takes the form of the cross-tail S, a weak-field feature comprised of the tail neutral sheet with diagonally symmetric extensions along the magnetopause flanks connecting it to the separator line. The cross-tail S is evident in the MHD results and in cross-sectional maps based on IMP 8 data. The magnetopause expression of the sash is latent in prior works that described the geometry of antiparallel fields across the magnetopause and the consequent cancellation of the fields within the magnetopause layer. The sash picture bears a strong resemblance to antiparallel merging geometry.

  8. Design and construction of a storm window with increased thermal efficiency which opens to allow ventilation as needed. Final technical report, proposal number F375

    SciTech Connect

    Not Available

    1980-01-01

    The project as originally conceived and funded envisioned a conventional full - window - length storm sash mounted in the cement block window opening. Appropriate linkage would open the storm sash. This design proved to be a safety hazard and physically undesirable. The design of the storm window sash was revised. Individual storm frames were to be mounted on each awning sash. Mechanical interferences with the storm sash occurred when a two inch air space was used. This was solved by reducing the air space to the optimum dimension of 3/4 inches. The sizes and configuration of the awning type windows were studied to aid in cost effective and efficient design of the storm frame. It was discovered that in all but the later (aluminum conserving) models, the window pane was recessed 3/4 inches. This serendipidous fact resulted in the design of a triple glazed window utilizing only one storm sash glazed on both sides. The resultant combination window and storm sash is estimated to give approximately R 3.9 to R 5.2 insulation value.

  9. Assessment of the Short Acculturation Scale for Hispanics (SASH) among low-income, immigrant Hispanics.

    PubMed

    Ellison, Jennie; Jandorf, Lina; Duhamel, Katherine

    2011-09-01

    The present analysis sought to determine the usefulness and validity of the Short Acculturation Scale for Hispanics (SASH) in assessment of acculturation among Hispanics participating in a colorectal cancer screening study. Primary data was collected from 2008 to 2009 through surveys in East Harlem community-based sites and health clinics among Hispanics. Bivariate correlations and independent samples t tests assessed SASH correlation with acculturation proxies and relationships between proxies, SASH, and sociodemographics. SASH was highly correlated with commonly used acculturation proxies; inter-scale correlations and alpha scores were high. Sociodemographics associated with proxy variables were associated with SASH. In conclusion, SASH is useful and valid for assessing acculturation among Hispanics; however, a shortened version or acculturation proxy variables could also be utilized. PMID:21688089

  10. Interior view of the window wall of the enclosed office ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of the window wall of the enclosed office area taken from the main warehouse area showing the metal sash windows, view facing west - U.S. Marine Corps Base Hawaii, Kaneohe Bay, Warehouse 250, Aviation Storehouse, C Street between Fifth & Sixth Streets, Kaneohe, Honolulu County, HI

  11. DETAIL OF ORIGINAL WINDOWS ON SECOND FLOOR AT THE EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF ORIGINAL WINDOWS ON SECOND FLOOR AT THE EAST END, SHOWING CLEARANCE BETWEEN WINDOW SASH AND PILASTER. VIEW FACING NORTH-NORTHWEST. - U.S. Naval Base, Pearl Harbor, Aviation Storehouse, Vincennes Avenue at Simms Street, Pearl City, Honolulu County, HI

  12. VIEW OF ORIGINAL WINDOWS (TYPICAL) OF BUILDING 445, FROM EXTERIOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF ORIGINAL WINDOWS (TYPICAL) OF BUILDING 445, FROM EXTERIOR OF THE BUILDING. THESE ORIGINAL STEEL SASHED WINDOWS ARE SHOWN WITH THE STEEL SHUTTERS OPEN. - U.S. Naval Base, Pearl Harbor, Magazine Building, Kuakua Avenue near Wharf S-20, Pearl City, Honolulu County, HI

  13. VIEW OF ORIGINAL WINDOWS (TYPICAL) OF BUILDING 416, FROM EXTERIOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF ORIGINAL WINDOWS (TYPICAL) OF BUILDING 416, FROM EXTERIOR OF THE BUILDING. THESE ORIGINAL STEEL SASHED WINDOWS ARE SHOWN WITH THE STEEL SHUTTERS OPEN. - U.S. Naval Base, Pearl Harbor, Magazine Building, Kuakua Avenue near Wharf S-19, Pearl City, Honolulu County, HI

  14. 17. DINING ROOM INTERIOR SHOWING GROUP OF THREE 1 LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. DINING ROOM INTERIOR SHOWING GROUP OF THREE 1 LIGHT OVER 1 LIGHT WINDOWS, AND DOORWAY INTO KITCHEN. VIEW TO EAST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA

  15. Downregulation of SASH1 correlates with tumor progression and poor prognosis in ovarian carcinoma

    PubMed Central

    REN, XIAOYAN; LIU, YIFEI; TAO, YUMEI; ZHU, GUOXIANG; PEI, MEILAN; ZHANG, JIANGUO; LIU, JIAN

    2016-01-01

    SAM- and SH3-domain containing 1 (SASH1) is a recently identified tumor suppressor gene that is required in the tumorigenesis of breast and other solid carcinomas. The SASH1 protein contains SH3 and SAM domains, indicating that it may serve an important role in intracellular signal transduction. The purpose of the present study was to investigate the expression of SASH1 in ovarian carcinoma and the correlation between its expression with clinical pathological features and clinical significance, and the effect of SASH1 on cell proliferation, apoptosis and migration of ovarian SKOV3 cells. The human ovarian carcinoma tissues and adjacent normal tissues were collected following surgery. Reverse transcription-quantitative polymerase chain reaction and western blot analysis were used to detect the expression levels of SASH1 mRNA and protein, respectively. The expression levels of SASH1 mRNA and protein in ovarian carcinoma tissues were significantly lower than that observed in adjacent normal tissues (P<0.05). The expression levels of SASH1 in samples from patients without lymph nodes metastasis and patients with early FIGO stage was lower than those with lymph nodes metastasis and patients with advanced FIGO stage (P<0.05). Flow cytometry analysis and Transwell invasion chamber experiments were used to investigate the effect of SASH1 on the cell proliferation, apoptosis and migration of SKOV3 cells. The recombinant plasmid pcDNA3.1-SASH1 was constructed and transfected into SKOV3 cells. In addition, the SKOV3 cells in the pcDNA3.1-SASH1 group exhibited significantly reduced cell growth, proliferation, and migration ability compared to the empty vector group and normal group (P<0.01). There were a greater number of apoptotic cells in the pcDNA3.1-SASH1 group compared to the empty vector group and normal group (P<0.01). Taken together, these results indicated that SASH1 may be a tumor suppressor gene in ovarian carcinoma, and SASH1 expression inhibited growth

  16. 12. INTERIOR OF KITCHEN/UTILITY AREA SHOWING ORIGINAL 1LIGHT OVER 1LIGHT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. INTERIOR OF KITCHEN/UTILITY AREA SHOWING ORIGINAL 1-LIGHT OVER 1-LIGHT, DOUBLE HUNG WINDOW OVER SINK, AND BUILT-IN KITCHEN CABINETRY. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  17. Multiply glazed window and door assemblies with screened breathing passages

    SciTech Connect

    Chludil, S.T.

    1987-04-14

    This patent describes a multiply glazed, vented window or door assembly comprising: spaced apart glass panes sealably secured perimetrally in parallel side sash members and parallel upper and lower sash members. At least one of the sash members has in its outer surface, a linear groove perimetrally aligned with the space between the panes and further having a breathing port extending from the marginal wall of the groove through to the space between the panes; an elongate flat plate having fine perforations and parallel end flanges projecting generally perpendicularly therefrom, fitting into and sealing off the groove at spaced distances from the port to provide an air circulation manifold under the plate. The plate is sufficiently long to have sufficient perforations to provide a cross-sectional area which correlates with the cross-sectional area of the port; and means for securing the plate in place.

  18. Prediction of Alfvénic turbulence near the magnetospheric sash

    NASA Astrophysics Data System (ADS)

    Erickson, G. M.; Siscoe, G. L.; Weimer, D. R.; Siebert, K. D.; Heinemann, M. A.; Sonnerup, B. U. Ö.; Maynard, N. C.; White, W. W.

    2002-04-01

    Results of global MHD simulations are used to examine the susceptibility of magnetosheath plasma to anisotropy-driven instabilities, specifically the mirror mode, electromagnetic ion cyclotron (EMIC), and firehose instabilities. Advection of magnetosheath plasma is followed along MHD-specified streamlines assuming double-adiabatic equations of state, while the anisotropic pressure is constrained by the instability threshold criteria and the condition that the trace of the gyrotropic pressure tensor be three times the MHD specification for the (isotropic) pressure. Following this procedure, mirror mode and EMIC turbulence is indicated in the dayside magnetosheath and in a layer adjacent to the dayside magnetopause, generally in accord with theoretical and observational expectations. The new result is the prediction of strong firehose or Alfvénic turbulence in the magnetosheath adjacent to the magnetospheric sash. Alfvén waves will propagate downwind from the sash. Also, as magnetic field strength increases downwind from the sash, mirror mode and EMIC waves are again indicated.

  19. 30. INTERIOR OF BEDROOM NO. 3 SHOWING SINGLE 1LIGHT OVER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. INTERIOR OF BEDROOM NO. 3 SHOWING SINGLE 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOW AT NORTHWEST ROOM CORNER. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA

  20. Aerosol Optical Depth Value-Added Product for the SAS-He Instrument

    SciTech Connect

    Ermold, B; Flynn, CJ; Barnard, J

    2013-11-27

    The Shortwave Array Spectroradiometer – Hemispheric (SAS-He) is a ground-based, shadowband instrument that measures the direct and diffuse solar irradiance. In this regard, the instrument is similar to the Multi-Filter Rotating Shadowband Radiometer (MFRSR) – an instrument that has been in the ARM suite of instruments for more than 15 years. However, the two instruments differ significantly in wavelength resolution and range. In particular, the MFRSR only observes the spectrum in six discrete wavelength channels of about 10 nm width from 415 to 940 nm. The SAS-He, in contrast, incorporates two fiber-coupled grating spectrometers: a Si CCD spectrometer with over 2000 pixels covering the range from 325-1040 nm with ~ 2.5 nm resolution ,and an InGaAs array spectrometer with 256 pixels covering the wavelength range from 960-1700 nm with ~ 6 nm resolution.

  1. 8. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN, 6-LIGHT OVER 1-LIGHT SASH WINDOWS ON FRONT WALL AT PHOTO LEFT, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON BACK WALL AT EXTREME PHOTO RIGHT. VIEW TO EAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  2. Autosomal-recessive SASH1 variants associated with a new genodermatosis with pigmentation defects, palmoplantar keratoderma and skin carcinoma.

    PubMed

    Courcet, Jean-Benoît; Elalaoui, Siham Chafai; Duplomb, Laurence; Tajir, Mariam; Rivière, Jean-Baptiste; Thevenon, Julien; Gigot, Nadège; Marle, Nathalie; Aral, Bernard; Duffourd, Yannis; Sarasin, Alain; Naim, Valeria; Courcet-Degrolard, Emilie; Aubriot-Lorton, Marie-Hélène; Martin, Laurent; Abrid, Jamal Eddin; Thauvin, Christel; Sefiani, Abdelaziz; Vabres, Pierre; Faivre, Laurence

    2015-07-01

    SASH1 (SAM and SH3 domain-containing protein 1) is a tumor suppressor gene involved in the tumorigenesis of a spectrum of solid cancers. Heterozygous SASH1 variants are known to cause autosomal-dominant dyschromatosis. Homozygosity mapping and whole-exome sequencing were performed in a consanguineous Moroccan family with two affected siblings presenting an unclassified phenotype associating an abnormal pigmentation pattern (hypo- and hyperpigmented macules of the trunk and face and areas of reticular hypo- and hyperpigmentation of the extremities), alopecia, palmoplantar keratoderma, ungueal dystrophy and recurrent spinocellular carcinoma. We identified a homozygous variant in SASH1 (c.1849G>A; p.Glu617Lys) in both affected individuals. Wound-healing assay showed that the patient's fibroblasts were better able than control fibroblasts to migrate. Following the identification of SASH1 heterozygous variants in dyschromatosis, we used reverse phenotyping to show that autosomal-recessive variants of this gene could be responsible for an overlapping but more complex phenotype that affected skin appendages. SASH1 should be added to the list of genes responsible for autosomal-dominant and -recessive genodermatosis, with no phenotype in heterozygous patients in the recessive form, and to the list of genes responsible for a predisposition to skin cancer. PMID:25315659

  3. Air leakage of newly instaled residential windows

    SciTech Connect

    Weidt, J.; Weidt, J.

    1980-06-01

    The air-leakage characteristics of five major window designs were measured in a field survey conducted in Twin Cities, Minnesota. A total of 192 windows (16 manufacturers) were tested at 58 sites representing a cross-section of single-family homes, townhouses, low- and high-rise apartments, and condominiums. Air-leakage measurements of the installed windows were compared with the current standard used by industry and government of 0.50 ft/sup 3//min/linear ft of crack. Other parameters studied were: effect of sash and frame material, effect of leakage between window frame and wall, differences among the product lines of a single manufacturer and between manufacturers, effect of installation practices, effect of cold weather on performance, change in performance over time for older windows, and performance of fixed glazing. Based on industry and government standards, 40% of all windows tested showed air-leakage characteristics higher than the 0.50 cfm/lfc standard, and 60% exceeded manufacturers' specifications for performance which in some cases were lower than the general industry standard. Analysis of the impact of various parameters on air-leakage performance showed that the operational design of the window was the most critical determinant although the ranking changes if performance is expressed in cfm/unit area or cfm/opening area. Air leakage was measured using a portable pressurization chamber. Smoke pencils, thermographic techniques and extensive photographic documentation provided additional data as to the location and cause of air leakage problems.

  4. 19. INTERIOR OF PANTRY SHOWING SHELVES, PLUMBING FOR A SINK, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. INTERIOR OF PANTRY SHOWING SHELVES, PLUMBING FOR A SINK, AND 1-LIGHT OVER 1-LIGHT SASH WINDOW ON SOUTH WALL. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  5. Fur Trade Era Interpretation. The Voyageur Sash and Garter and a Fur Trade Emblem: A Curiosity Ripe for Interpretation.

    ERIC Educational Resources Information Center

    Davis, Wendy; Henderson, Bob

    1998-01-01

    Provides outdoor educators with background information for historical interpretation activities during Canadian canoe trips. Discusses the history, evolution, and uses of brightly colored sashes and garters worn by voyageurs during the fur trade era, and speculates on the origins of the Lauburu canoe emblem, used by both the Mic Mac peoples and…

  6. Observation of the magnetospheric ``sash'' and its implications relative to solar-wind/magnetospheric coupling: A multisatellite event analysis

    NASA Astrophysics Data System (ADS)

    Maynard, N. C.; Savin, S.; Erickson, G. M.; Kawano, H.; Němeček, Z.; Peterson, W. K.; Šafránoková, J.; Sandahl, I.; Scudder, J. D.; Siscoe, G. L.; Sonnerup, B. U. Ö.; Weimer, D. R.; White, W. W.; Wilson, G. R.

    2001-04-01

    Using a unique data set from the Wind, Polar, Interball 1, Magion 4, and Defense Meteorological Satellite Program (DMSP) F11 satellites, comparisons with the Integrated Space Weather Model (ISM) have provided validation of the global structure predicted by the ISM model, which in turn has allowed us to use the model to interpret the data to further understand boundary layers and magnetospheric processes. The comparisons have shown that the magnetospheric ``sash'' [White et al., 1998], a region of low magnetic field discovered by the MHD modeling which extends along the high-latitude flank of the magnetopause, is related to the turbulent boundary layer on the high-latitude magnetopause, recently mapped by Interball 1. The sash in the data and in the model has rotational discontinuity properties, expected for a reconnection site. At some point near or behind the terminator, the sash becomes a site for reconnection of open field lines, which were previously opened by merging on the dayside. This indicates that significant reconnection in the magnetotail occurs on the flanks. Polar mapped to the high-density extension of the sash into the tilted plasma sheet. The source of the magnetosheath plasma observed by Polar on closed field lines behind the terminator was plasma entry through the low field connection of the sash to the central plasma sheet. The Polar magnetic field line footprints in each hemisphere are moving in different directions. Above and below the tilted plasma sheet the flows in the model are consistent with the corresponding flows in the ionosphere. The turbulence in the plasma sheet allows the convection patterns from each hemisphere to adjust. The boundary layer in the equatorial plane on the flank for this interplanetary magnetic field BY condition, which is below the tilted central plasma sheet, is several RE thick and is on tailward flowing open field lines. This thick boundary layer shields the magnetopause from viscous forces and must be driven

  7. 9. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN AT PHOTO LEFT CENTER, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON REAR WALL AT PHOTO RIGHT. FIREPLACE ORIGINALLY OCCUPIED SPACE TO THE EXTREME PHOTO RIGHT OF SASH WINDOW ON THE REAR WALL. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  8. 15. INTERIOR OF SOUTH BEDROOM SHOWING 6LIGHT OVER 1LIGHT, DOUBLEHUNG, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. INTERIOR OF SOUTH BEDROOM SHOWING 6-LIGHT OVER 1-LIGHT, DOUBLE-HUNG, WOOD-FRAME WINDOWS ON EAST AND SOUTH WALL. VIEW TO SOUTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  9. 25. INTERIOR OF KITCHEN NO. 2 SHOWING BUILTIN CABINETS, 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. INTERIOR OF KITCHEN NO. 2 SHOWING BUILT-IN CABINETS, 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOW, AND DOORWAY TO UTILITY ROOM. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA

  10. Aortopulmonary window

    MedlinePlus

    Aortopulmonary window is a rare heart defect in which there is a hole connecting the major artery taking blood ... rest of the body. Babies with an aortopulmonary window have a hole in between the aorta and ...

  11. Mammary tumor growth and metastasis are reduced in c-Kit mutant Sash mice.

    PubMed

    He, Licai; Zhu, Zhenfeng; Chen, Shang; Wang, Yongping; Gu, Haihua

    2016-06-01

    Besides its well-known function in allergic response, mast cell, one of the key immune cells present in tumor microenvironment, plays important roles in cancer progression. However, the functional role of mast cells in breast cancer development and metastasis is not well understood. To test the involvement of mast cells in breast cancer, we examined the effects of loss of mast cells on mammary tumor development by crossing the well-known mast cell deficient mouse strain sash (Kit(W-sh/W-sh) ) with the mammary tumor transgenic mouse strain MMTV-Polyoma Middle T antigen (PyMT). Although mammary tumor onset was not affected in the absence of mast cells, mammary growth and metastasis were reduced in PyMT/Kit(W-sh/W-sh) mice compared with PyMT/wild-type mice (WT). Histological and immunofluorescent analyses showed that tumors from PyMT/Kit(W-sh/W-sh) mice showed largely differentiated morphology with reduced angiogenesis compared with MMTV-PyMT/WT mice. Our results suggest that mast cells may promote breast cancer growth and metastasis. Agents that can block mast cells growth are potential new therapies to treat metastatic breast cancer. PMID:26992445

  12. 21. INTERIOR OF BEDROOM NUMBER THREE SHOWING 6LIGHT OVER 1 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. INTERIOR OF BEDROOM NUMBER THREE SHOWING 6-LIGHT OVER 1 LIGHT SASH WINDOWS THROUGH WEST (PHOTO LEFT) AND NORTH (PHOTO RIGHT) WALLS. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  13. 10. LIVING ROOM INTERIOR SHOWING 1 OVER 1 LIGHT, DOUBLEHUNG, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. LIVING ROOM INTERIOR SHOWING 1 OVER 1 LIGHT, DOUBLEHUNG, WOOD-FRAME WINDOWS FLANKING FRONT ENTRANCE DOOR AND SOUTH END DOOR TO ENCLOSED SLEEPING PORCH/STAIR ACCESS TO ATTIC. CEILING AND WALLS IN THIS ROOM AND THROUGHOUT THE HOUSE ARE COVERED WITH ORIGINAL FIBERBOARD. THE FLOOR IN THIS ROOM AND ALL OTHERS EXCEPT THE BATHROOM, KITCHEN AND DINING ROOM ARE HARDWOOD. VIEW TO SOUTHEAST. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA

  14. CAVE WINDOW

    DOEpatents

    Levenson, M.

    1960-10-25

    A cave window is described. It is constructed of thick glass panes arranged so that interior panes have smaller windowpane areas and exterior panes have larger areas. Exterior panes on the radiation exposure side are remotely replaceable when darkened excessively. Metal shutters minimize exposure time to extend window life.

  15. Effects of sash movement and walk-bys on aerodynamics and contaminant leakage of laboratory fume cupboards.

    PubMed

    Tseng, Li-Ching; Huang, Rong Fung; Chen, Chih-Chieh; Chang, Cheng-Ping

    2007-04-01

    In order to speculate the physical mechanisms of contaminant leakage during sash movement and walk-bys through a laboratory fume cupboard, the complicated three-dimensional flow patterns and the real-time tracer gas leakage are studied via the laser-assisted flow visualization method and the standard gas sampling technique, respectively, over a transparent, full scale chemical fume cupboard. Through the flow visualization, the evolution of drastic changes of the flow pattern is demonstrated. The highly turbulent jet-like currents are induced by the unsteady flow motion near the cupboard face. Large-scale turbulent eddies accompanied with the jet-like currents obviously bring large amount of in-cupboard smoke out to the atmosphere. The turbulent mixing extends the size and the strength of the large-scale eddy circulations, and predominantly contributes to the mechanism that causes the severe spread of contaminant leakage in few seconds. The tracer gas tests that are conducted by employing pr-EN 14175:2003 method show consistent containment results with the flow visualization findings. The temporally evolving large-scale turbulent eddies induced by the sash movement and the walk-bys cause substantially high contaminant leakage to the environment and the breathing zone of the operator. PMID:17485863

  16. Effects of walk-by and sash movement on contaminant leakage of air curtain-isolated fume hood.

    PubMed

    Huang, Rong Fung; Chen, Hong Da; Hung, Chien-Hsiung

    2007-12-01

    The effects of the walk-by motion and sash movement on the containment leakage of an air curtain-isolated fume hood were evaluated and compared with the results of a corresponding conventional fume hood. The air curtain was generated by a narrow planar jet issued from the double-layered sash and a suction slot-flow arranged on the floor of the hood just behind the doorsill. The conventional fume hood used for comparison had the major dimensions identical to the air-curtain hood. SF tracer-gas concentrations were released and measured following the prEN 14175-3:2003 protocol to examine the contaminant leakage levels. Experimental results showed that operating the air-curtain hood at the suction velocity above about 6 m/s and jet velocity about 1 m/s could provide drastically high containment performance when compared with the corresponding conventional fume hood operated at the face velocity of 0.5 m/s. The total air flow required for the air-curtain hood operated at 6 m/s suction velocity and 1 m/s jet velocity was about 20% less than that exhausted by the conventional fume hood. If the suction velocity of the air-curtain hood was increased above 8 m/s, the containment leakage during dynamic motions could be reduced to ignorable level (about 10(3) ppm). PMID:18212476

  17. Cluster observations of the dusk flank magnetopause near the sash: Ion dynamics and flow-through reconnection

    NASA Astrophysics Data System (ADS)

    Maynard, Nelson C.; Farrugia, Charles J.; Burke, William J.; Ober, Daniel M.; Mozer, Forrest S.; Rème, Henri; Dunlop, Malcolm; Siebert, Keith D.

    2012-10-01

    Compared to the dayside, dynamics on the flanks of the magnetopause are poorly understood. To help bridge this knowledge gap we analyzed Cluster plasma and field measurements acquired during a 90-min period on 20 November 2003 when Cluster crossed the magnetopause four times in the vicinity of the sash. MHD simulations provide a context for Cluster observations. Crossings were between the magnetosheath and an S-shaped plasma sheet, rather than to the open-field lobes of the magnetotail. Cluster encountered two regions of MHD-breaking differences between perpendicular ion velocities and E × B convection. Ion adiabatic expansion parameter (δi) calculations show that ion gyrotropy was not broken during an episode of strong Alfvén wave activity in the magnetosheath. However, gyrotropy was broken (δi > 1) during the fourth magnetopause crossing. In the magnetosheath, ion guiding-center motion was maintained but inertial effects associated with temporally varying electric fields are probable sources of velocity differences. Regarding the magnetopause crossing, the generalized Ohm's law limits possible sources for breaking ion gyrotropy to inertial forces and/or electron pressure gradients associated with a nearby reconnection event. We suggest that Cluster witnessed effects of a temporally varying and spatially limited, flow-through reconnection event between open mantle field lines from the two polar caps adding new closed flux to the LLBL at the sash. Future modeling of flank dynamics must consider inertial forces as significant drivers at the magnetopause and in the adjacent magnetosheath.

  18. Mast cell-deficient Kit(W-sh) "Sash" mutant mice display aberrant myelopoiesis leading to the accumulation of splenocytes that act as myeloid-derived suppressor cells.

    PubMed

    Michel, Anastasija; Schüler, Andrea; Friedrich, Pamela; Döner, Fatma; Bopp, Tobias; Radsak, Markus; Hoffmann, Markus; Relle, Manfred; Distler, Ute; Kuharev, Jörg; Tenzer, Stefan; Feyerabend, Thorsten B; Rodewald, Hans-Reimer; Schild, Hansjörg; Schmitt, Edgar; Becker, Marc; Stassen, Michael

    2013-06-01

    Mast cell-deficient Kit(W-sh) "sash" mice are widely used to investigate mast cell functions. However, mutations of c-Kit also affect additional cells of hematopoietic and nonimmune origin. In this study, we demonstrate that Kit(W-sh) causes aberrant extramedullary myelopoiesis characterized by the expansion of immature lineage-negative cells, common myeloid progenitors, and granulocyte/macrophage progenitors in the spleen. A consistent feature shared by these cell types is the reduced expression of c-Kit. Populations expressing intermediate and high levels of Ly6G, a component of the myeloid differentiation Ag Gr-1, are also highly expanded in the spleen of sash mice. These cells are able to suppress T cell responses in vitro and phenotypically and functionally resemble myeloid-derived suppressor cells (MDSC). MDSC typically accumulate in tumor-bearing hosts and are able to dampen immune responses. Consequently, transfer of MDSC from naive sash mice into line 1 alveolar cell carcinoma tumor-bearing wild-type littermates leads to enhanced tumor progression. However, although it can also be observed in sash mice, accelerated growth of transplanted line 1 alveolar cell carcinoma tumors is a mast cell-independent phenomenon. Thus, the Kit(W-sh) mutation broadly affects key steps in myelopoiesis that may have an impact on mast cell research. PMID:23636054

  19. 17. INTERIOR OF NORTH BEDROOM SHOWING 6LIGHT OVER 1LIGHT, DOUBLEHUNG, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. INTERIOR OF NORTH BEDROOM SHOWING 6-LIGHT OVER 1-LIGHT, DOUBLE-HUNG, WOOD-FRAME WINDOWS IN PAIRED ARRANGEMENT ON NORTH WALL AND SINGLY ON EAST WALL. VIEW TO NORTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  20. 4. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR OF SOUTH END OF BUILDING 104 SHOWING 1-LIGHT SIDE EXIT DOOR AND ORIGINAL WOOD-FRAMED SLIDING GLASS KITCHEN WINDOWS AT PHOTO CENTER, AND TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME ON BACK WALL OF HOUSE. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  1. [Aortopulmonary window].

    PubMed

    González-Marín, María Arántzazu; Jiménez-Díaz, Javier; Centeno-Jiménez, Miriam; García-Cabezas, M Ángel

    2015-01-01

    The aortopulmonary window is a rare cause of heart failure in the neonate. It must be ruled out if there are signs of pulmonary edema without the most frequent left-right shunts. We report the echocardiographic images of a newborn who was admitted with symptoms of heart failure at our institution. PMID:25698530

  2. Particle entry through "Sash" groove simulated by Global 3D Electromagnetic Particle code with duskward IMF By

    NASA Astrophysics Data System (ADS)

    Yan, X.; Cai, D.; Nishikawa, K.; Lembege, B.

    2004-12-01

    We made our efforts to parallelize the global 3D HPF Electromagnetic particle model (EMPM) for several years and have also reported our meaningful simulation results that revealed the essential physics involved in interaction of the solar wind with the Earth's magnetosphere using this EMPM (Nishikawa et al., 1995; Nishikawa, 1997, 1998a, b, 2001, 2002) in our PC cluster and supercomputer(D.S. Cai et al., 2001, 2003). Sash patterns and related phenomena have been observed and reported in some satellite observations (Fujumoto et al. 1997; Maynard, 2001), and have motivated 3D MHD simulations (White and al., 1998). We also investigated it with our global 3D parallelized HPF EMPM with dawnward IMF By (K.-I. Nishikawa, 1998) and recently new simulation with dusk-ward IMF By was accomplished in the new VPP5000 supercomputer. In the new simulations performed on the new VPP5000 supercomputer of Tsukuba University, we used larger domain size, 305×205×205, smaller grid size (Δ ), 0.5R E(the radium of the Earth), more total particle number, 220,000,000 (about 8 pairs per cell). At first, we run this code until we get the so-called quasi-stationary status; After the quasi-stationary status was established, we applied a northward IMF (B z=0.2), and then wait until the IMF arrives around the magnetopuase. After the arrival of IMF, we begin to change the IMF from northward to duskward (IMF B y=-0.2). The results revealed that the groove structure at the day-side magnetopause, that causes particle entry into inner magnetosphere and the cross structure or S-structure at near magneto-tail are formed. Moreover, in contrast with MHD simulations, kinetic characteristic of this event is also analyzed self-consistently with this simulation. The new simulation provides new and more detailed insights for the observed sash event.

  3. Flow and containment characteristics of a sash-less, variable-height inclined air-curtain fume hood.

    PubMed

    Huang, Rong Fung; Chen, Jia-Kun; Hung, Wei-Lun

    2013-08-01

    To increase containment efficiency and reduce energy consumption, a sash-less, variable-height inclined air-curtain fume hood (sIAC hood) was developed and tested by a laser-assisted flow visualization technique and tracer-gas detection method. This novel design requires neither sash nor baffle. The sIAC hood employed the inclined push-pull air-curtain technique and two deflection plates installed on the side walls of the hood to induce a tetra-vortex flow structure. The results of flow visualization showed that the slot for suction flow, offset from the slot for the up-blowing jet, caused the air curtain to incline towards the rear wall, thus enhancing the robustness of the tetra-vortex flow structure. Such a flow structure could reduce the influence of draught and human walk-by across the hood face. The containment around the central area of the hood was isolated by the inclined push-pull air curtain. The pollutants carried by the reverse flow induced by the flow separation were guided by the deflection plates from the side walls towards the rear, thus contributing to the formation of the tetra-vortex flow structure. The up/down movable ceiling positioned the suction slot close to the device's pollutant emission opening, but left room (less than 50 cm) for unrestricted hand movement. Testing was carried out based on the methodology described in EN14175. The results of a static test showed that small face velocities of 0.25 and 0.16 m s(-1) were enough to obtain nearly null leakage levels for low and tall pollutant sources. The results of a traversing plate test showed that the face velocity, 0.32 m s(-1), would cause negligibly small leakage levels. The sIAC hood could obtain significantly higher containment efficiency than a conventional hood by operating at a face velocity significantly lower than that of conventional hoods. PMID:23519947

  4. Window comparator

    NASA Technical Reports Server (NTRS)

    Black, J. M. (Inventor)

    1977-01-01

    A window comparator is described, comprising two operational amplifiers, one with two feedback circuits, each feedback circuit having a diode connected to the amplifier output and poled for forward current conduction of opposite polarity, to provide an algebraic difference between an input signal and a selected set-point voltage. Differential input terminals of the second operational amplifier were connected to the separate feedback circuits of the first operational amplifier, one input terminal to the output of one diode, and the other to the output of the other diode. A selected window-width voltage was connected through a coupling resistor to one of the input terminals of the second operational amplifier to determine when the algebraic difference of the input signal and the setpoint voltage has exceeded a predetermined tolerance after that difference has changed signs.

  5. 9. INTERIOR OF LIVING ROOM SHOWING ALUMINUM SLIDING GLASS WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR OF LIVING ROOM SHOWING ALUMINUM SLIDING GLASS WINDOW FRONT DOOR, AND ORIGINAL 6-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOWS IN SINGLE AND DOUBLE ARRANGEMENTS. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  6. 10. INTERIOR OF KITCHEN/UTILITY AREA SHOWING 1LIGHT THREE PANEL WOOD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR OF KITCHEN/UTILITY AREA SHOWING 1-LIGHT THREE PANEL WOOD OUTSIDE DOOR SOUTH SIDE OF HOUSE, PLUMBING HOOKUPS FOR WASHER BELOW BUILT-IN CABINETS AT PHOTO LEFT, AND PAIRED ARRANGEMENTS OF 4-LIGHT OVER 4-LIGHT, DOUBLE-HUNG, WOOD-FRAMED WINDOWS ON SOUTH AND WEST WALLS. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  7. 4. EXTERIOR OF SOUTH END OF BUILDING 103 SHOWING 1LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. EXTERIOR OF SOUTH END OF BUILDING 103 SHOWING 1-LIGHT SIDE EXIT DOOR AND ORIGINAL WOOD-FRAMED SLIDING GLASS KITCHEN WINDOWS AT PHOTO LEFT, CRISS-CROSS WOOD BALUSTRADE AROUND FRONT PORCH WITH OPEN DOOWAY TO BASEMENT BENEATH, AND STONE FACING ALONG ORIGINAL PORTION OF HOUSE FRONT AT PHOTO RIGHT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  8. Human rights violations and smoking status among South African adults enrolled in the South Africa Stress and Health (SASH) study

    PubMed Central

    Dutra, Lauren M; Williams, David R; Gupta, Jhumka; Kawachi, Ichiro; Okechukwu, Cassandra A

    2014-01-01

    Despite South Africa’s history of violent political conflict, and the link between stressful experiences and smoking in the literature, no public health study has examined South Africans’ experiences of human rights violations and smoking. Using data from participants in the nationally representative cross-sectional South Africa Stress and Health study (SASH), this analysis examined the association between respondent smoking status and both human rights violations experienced by the respondent and violations experienced by the respondents’ close friends and family members. SAS-Callable SUDAAN was used to construct separate log-binomial models by political affiliation during apartheid (government or liberation supporters). In comparison to those who reported no violations, in adjusted analyses, government supporters who reported violations of themselves but not others (RR=1.76, 95%CI: 1.25–2.46) had a significantly higher smoking prevalence. In comparison to liberation supporters who reported no violations, those who reported violations of self only (RR=1.56, 95%CI: 1.07–2.29), close others only (RR=1.97, 95%CI: 1.12–3.47), or violations of self and close others due to close others’ political beliefs and the respondent’s political beliefs (RR=2.86, 95%CI: 1.70–4.82) had a significantly higher prevalence of smoking. The results of this analysis suggest that a relationship may exist between human rights violations and smoking among South Africa adults. Future research should use longitudinal data to assess causality, test the generalizability of these findings, and consider how to apply these findings to smoking cessation interventions. PMID:24509050

  9. Particle entry through sash in the magnetopause with a dawndard IMF as simulated by a 3-D EM particle code

    NASA Astrophysics Data System (ADS)

    Cai, D.; Yan, X.; Lembege, B.; Nishikawa, K.

    2003-12-01

    We report a new progress in the long-term effort to represent the global interaction of the solar wind with the Earth's magnetosphere using a three-dimensional electromagnetic particle code with the improved resolutions using the HPF Tristan code. After a quasi-steady state is established with an unmagnetized solar wind we gradually switch on a northward interplanetary magnetic field (IMF), which causes a magnetic reconnection at the nightside cusps and the magnetosphere to be depolarized. In the case that the northward IMF is switched gradually to dawnward, there is no signature of reconnection in the near-Earth magnetotail as in the case with the southward turning. On the contrary analysis of magnetic fields in the magnetopause confirms a signature of magnetic reconnection at both the dawnside and duskside. And the plasma sheet in the near-Earth magnetotail clearly thins as in the case of southward turning. Arrival of dawnward IMF to the magnetopause creates a reconnection groove which cause particle entry into the deep region of the magnetosphere via field lines that go near the magnetopause. This deep connection is more fully recognized tailward of Earth. The flank weak-field fan joins onto the plasma sheet and the current sheet to form a geometrical feature called the cross-tail S that structurally integrates the magnetopause and the tail interior. This structure contributes to direct plasma entry between the magnetosheath to the inner magnetosphere and plasma sheet, in which the entry process heats the magnetosheath plasma to plasma sheet temperatures. These phenomena have been found by Cluster observations. Further investigation with Cluster observations will provide new insights for unsolved problems such as hot flow anomalies (HFAs), substorms, and storm-substorm relationship. 3-D movies with sash structure will be presented at the meeting.

  10. Human rights violations and smoking status among South African adults enrolled in the South Africa Stress and Health (SASH) study.

    PubMed

    Dutra, Lauren M; Williams, David R; Gupta, Jhumka; Kawachi, Ichiro; Okechukwu, Cassandra A

    2014-03-01

    Despite South Africa's history of violent political conflict, and the link between stressful experiences and smoking in the literature, no public health study has examined South Africans' experiences of human rights violations and smoking. Using data from participants in the nationally representative cross-sectional South Africa Stress and Health study (SASH), this analysis examined the association between respondent smoking status and both human rights violations experienced by the respondent and violations experienced by the respondents' close friends and family members. SAS-Callable SUDAAN was used to construct separate log-binomial models by political affiliation during apartheid (government or liberation supporters). In comparison to those who reported no violations, in adjusted analyses, government supporters who reported violations of themselves but not others (RR = 1.76, 95% CI: 1.25-2.46) had a significantly higher smoking prevalence. In comparison to liberation supporters who reported no violations, those who reported violations of self only (RR = 1.56, 95%CI: 1.07-2.29), close others only (RR = 1.97, 95%CI: 1.12-3.47), or violations of self and close others due to close others' political beliefs and the respondent's political beliefs (RR = 2.86, 95%CI: 1.70-4.82) had a significantly higher prevalence of smoking. The results of this analysis suggest that a relationship may exist between human rights violations and smoking among South Africa adults. Future research should use longitudinal data to assess causality, test the generalizability of these findings, and consider how to apply these findings to smoking cessation interventions. PMID:24509050

  11. 22. INTERIOR OF BATHROOM NUMBER TWO LOOKING BACK THROUGH OPEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. INTERIOR OF BATHROOM NUMBER TWO LOOKING BACK THROUGH OPEN DOOR TO BEDROOM NUMBER THREE. MIRRORED MEDICINE CABINET FLANKED BY 1-LIGHT OVER 1 LIGHT SASH WINDOWS IN GROUPED ARRANGEMENT ON WEST WALL ABOVE SINK AT PHOTO LEFT. VIEW TO NORTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  12. 14. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOORS TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOORS TO WALK-IN CLOSETS, AND 1-LIGHT OVER 1-LIGHT SASH WINDOW ON NORTH WALL. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  13. 8. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR OF LIVING ROOM SHOWING OPEN DOORWAY TO KITCHEN AT PHOTO RIGHT, 6-LIGHT OVER 1-LIGHT SASH WINDOWS ON FRONT (EAST) WALL AT PHOTO CENTER. ENTRY ROOM AND OPEN 1-LIGHT FRONT DOOR AT EXTREME PHOTO LEFT. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  14. 32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. INTERIOR OF STORM PORCH ADDITION SHOWING FLUSH SIDEEXIT DOOR AT PHOTO LEFT CENTER AND 1-LIGHT OVER 1LIGHT SASH WINDOW THROUGH WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  15. 30. INTERIOR OF ORIGINAL SIDEENTRY UTILITY ROOM FROM STORM PORCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. INTERIOR OF ORIGINAL SIDE-ENTRY UTILITY ROOM FROM STORM PORCH ADDITION SHOWING DOOR TO KITCHEN AT PHOTO RIGHT, PANEL DOOR TO BROOM CLOSET AT PHOTO LEFT, AND 1-LIGHT OVER 1-LIGHT SASH WINDOW INTO PANTRY AT PHOTO CENTER. VIEW TO NORTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  16. 13. INTERIOR OF LIVING ROOM SHOWING 2LIGHT OVER 2LIGHT, DOUBLEHUNG, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR OF LIVING ROOM SHOWING 2-LIGHT OVER 2-LIGHT, DOUBLE-HUNG, WOOD-FRAMED WINDOWS ON SOUTHEAST WALL, AND UNUSUAL 1-LIGHT SASH WINDOW WITH TRANSOM AT PHOTO LEFT. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  17. The design and testing of a highly insulating glazing system for use with conventional window systems

    SciTech Connect

    Arasteh, D.; Selkowitz, S.; Wolfe, J.R.

    1989-02-01

    In most areas of the United States, windows are by far the poorest insulating material used in buildings. As a result, approximately 3 percent of the nation's energy use is used to offset heat lost through windows. Under cold conditions, conventional double glazings create uncomfortable spaces and collect condensation. However, with the recent introduction of low-emissivity (low-E) coatings and low/conductivity gas filling to respectively reduce radiative and conductive/convective heat transfer between glazing layers, some manufacturers are beginning to offer windows with R-values (resistance to heat transfer) of 4 hr-ft/sup 2/-F/Btu (0.70m/sup 2/-C/W). This papers presents designs for and analysis and test results of an insulated glass unit with a center-of-glass R-value of 8-10; approximately twice as good as gas-filled low-E units, and four times that of conventional double glazing. This high-R design starts with a conventional insulated-glass unit and adds two low-emissivity coatings, a thin glass middle glazing layer, and a Krypton or Krypton/Argon gas fill. The unit's overall width is 1 in. (25 mm) or less, consistent with most manufacturers' frame and sash design requirements. Using state-of-the-art low-emissivity coatings does not significantly degrade the solar heat gain potential or visible transmittance of the window. Work to date has substantiated this concept of a high-R window although specific components require further research and engineering development. Demonstration projects, in conjunction with utilities and several major window manufacturers, are planned. This high-R window design is the subject of a DOE patent application.

  18. 1. Light brick buildings on left constitute 1885 mill built ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Light brick buildings on left constitute 1885 mill built by George Woodruff; lower section was probably a leading area. - Empire Mills Company, Front Avenue between Eighth & Tenth Streets, Columbus, Muscogee County, GA

  19. 1. Light tower, oil house close by, boathouse and keeper's ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Light tower, oil house close by, boathouse and keeper's house, view northwest, south or southeast sides - Goat Island Light Station, Goat Island, next to entrance to Cape Porpoise Harbor, just south of Trott Island, Cape Porpoise, York County, ME

  20. 1. Light tower and keeper's house, view southwest, northwest and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Light tower and keeper's house, view southwest, northwest and northeast sides - Little River Light Station, East end of Little River Island, at mouth of Little River & entrance to Cutler Harbor, Cutler, Washington County, ME

  1. Efficient Windows Collaborative

    SciTech Connect

    Nils Petermann

    2010-02-28

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  2. Air transparent soundproof window

    SciTech Connect

    Kim, Sang-Hoon; Lee, Seong-Hyun

    2014-11-15

    A soundproof window or wall which is transparent to airflow is presented. The design is based on two wave theories: the theory of diffraction and the theory of acoustic metamaterials. It consists of a three-dimensional array of strong diffraction-type resonators with many holes centered on each individual resonator. The negative effective bulk modulus of the resonators produces evanescent wave, and at the same time the air holes with subwavelength diameter existed on the surfaces of the window for macroscopic air ventilation. The acoustic performance levels of two soundproof windows with air holes of 20mm and 50mm diameters were measured. The sound level was reduced by about 30 - 35dB in the frequency range of 400 - 5,000Hz with the 20mm window, and by about 20 - 35dB in the frequency range of 700 - 2,200Hz with the 50mm window. Multi stop-band was created by the multi-layers of the window. The attenuation length or the thickness of the window was limited by background noise. The effectiveness of the soundproof window with airflow was demonstrated by a real installation.

  3. Color Wheel Windows

    ERIC Educational Resources Information Center

    Leonard, Stephanie

    2012-01-01

    In this article, the author describes a painting and drawing lesson which was inspired by the beautiful circular windows found in cathedrals and churches (also known as "rose windows"). This two-week lesson would reinforce both the concept of symmetry and students' understanding of the color wheel. (Contains 1 online resource.)

  4. Multi-functional windows

    NASA Astrophysics Data System (ADS)

    Nag, Nagendra; Goldman, Lee M.; Balasubramanian, Sreeram; Sastri, Suri

    2013-06-01

    The requirements for modern aircraft are driving the need for conformal windows for future sensor systems. However, limitations on optical systems and the physical properties of optically transparent materials currently limit the geometry of existing windows and window assemblies to faceted assemblies of flat windows held in weight bearing frames. Novel material systems will have to be developed which combine different materials (e.g. ductile metals with transparent ceramics) into structures that combine transparency with structural integrity. Surmet's demonstrated ability to produce novel transparent ceramic/metal structures will allow us to produce such structures in the types of conformal shapes required for future aircraft applications. Furthermore, the ability to incorporate transparencies into such structures also holds out the promise of creating multi-functional windows which provide a broad range of capabilities that might include RF antennas and de-icing in addition to transparency. Recent results in this area will be presented.

  5. Windows technology assessment

    SciTech Connect

    Baron, J.J.

    1995-10-01

    This assessment estimates that energy loss through windows is approximately 15 percent of all the energy used for space heating and cooling in residential and commercial buildings in New York State. The rule of thumb for the nation as a whole is about 25 percent. The difference may reflect a traditional assumption of single-pane windows while this assessment analyzed installed window types in the region. Based on the often-quoted assumption, in the United States some 3.5 quadrillion British thermal units (Btu) of primary energy, costing some $20 billion, is annually consumed as a result of energy lost through windows. According to this assessment, in New York State, the energy lost due to heat loss through windows is approximately 80 trillion Btu at an annual cost of approximately $1 billion.

  6. Zero Energy Windows

    SciTech Connect

    Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

    2006-05-17

    Windows in the U.S. consume 30 percent of building heating and cooling energy, representing an annual impact of 4.1 quadrillion BTU (quads) of primary energy. Windows have an even larger impact on peak energy demand and on occupant comfort. An additional 1 quad of lighting energy could be saved if buildings employed effective daylighting strategies. The ENERGY STAR{reg_sign} program has made standard windows significantly more efficient. However, even if all windows in the stock were replaced with today's efficient products, window energy consumption would still be approximately 2 quads. However, windows can be ''net energy gainers'' or ''zero-energy'' products. Highly insulating products in heating applications can admit more useful solar gain than the conductive energy lost through them. Dynamic glazings can modulate solar gains to minimize cooling energy needs and, in commercial buildings, allow daylighting to offset lighting requirements. The needed solutions vary with building type and climate. Developing this next generation of zero-energy windows will provide products for both existing buildings undergoing window replacements and products which are expected to be contributors to zero-energy buildings. This paper defines the requirements for zero-energy windows. The technical potentials in terms of national energy savings and the research and development (R&D) status of the following technologies are presented: (1) Highly insulating systems with U-factors of 0.1 Btu/hr-ft{sup 2}-F; (2) Dynamic windows: glazings that modulate transmittance (i.e., change from clear to tinted and/or reflective) in response to climate conditions; and (3) Integrated facades for commercial buildings to control/ redirect daylight. Market transformation policies to promote these technologies as they emerge into the marketplace are then described.

  7. Selecting windows for energy efficiency

    SciTech Connect

    1997-05-01

    New window technologies have increased energy benefits and comfort, and have provided more practical options for consumers. This selection guide will help homeowners, architects, and builders take advantage of the expanding window market. The guide contains three sections: an explanation of energy-related window characteristics, a discussion of window energy performance ratings, and a convenient checklist for window selection.

  8. GA microwave window development

    SciTech Connect

    Moeller, C.P.; Kasugai, A.; Sakamoto, K.; Takahashi, K.

    1994-10-01

    The GA prototype distributed window was tested in a 32 mm diam. waveguide system at a power density suitable for a MW gyrotron, using the JAERI/Toshiba 110 GHz long pulse internal converter gyrotron in the JAERI test stand. The presence of the untilted distributed window had no adverse effect on the gyrotron operation. A pulse length of 10 times the calculated thermal equilibrium time (1/e time) of 30 msec was reached, and the window passed at least 750 pulses greater than 30 msec and 343 pulses greater than 60 msec. Beyond 100 msec, the window calorimetry reached steady state, allowing the window dissipation to be measured in a single pulse. The measured loss of 4.0% agrees both with the estimated loss, on which the stress calculations are based, and with the attenuation measured at low power in the HE{sub 11} mode. After the end of the tests, the window was examined; no evidence of arcing air coating was found in the part of the window directly illuminated by the microwaves, although there was discoloration in a recess containing an optical diagnostic which outgassed, causing a local discharge to occur in that recess. Finally, there was no failure of the metal-sapphire joints during a total operating time of 50 seconds consisting of pulses longer than 30 msec.

  9. The Efficient Windows Collaborative

    SciTech Connect

    Petermann, Nils

    2006-03-31

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  10. double hung window details, hall window details, entrance door profiles ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    double hung window details, hall window details, entrance door profiles - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Help's Quarters, Prince William Forest Park, Triangle, Prince William County, VA

  11. Cordilleran slab windows

    SciTech Connect

    Thorkelson, D.J.; Taylor, R.P. )

    1989-09-01

    The geometry and geologic implications of subducted spreading ridges are topics that have bedeviled earth scientists ever since the recognition of plate tectonics. As a consequence of subduction of the Kula-Farallon and East Pacific rises, slab windows formed and migrated beneath the North American Cordillera. The probable shape and extent of these windows, which represent the asthenosphere-filled gaps between two separating, subducting oceanic plates, are depicted from the Late Cretaceous to the present. Possible effects of the existence and migration of slab windows on the Cordillera at various times include cessation of arc volcanism and replacement by rift or plate-edge volcanism; lithospheric uplift, attenuation, and extension; and increased intensity of compressional tectonism. Eocene extensional tectonism and alkaline magmatism in southern British Columbia and the northwestern United States were facilitated by slab-window development.

  12. Superconducting radiofrequency window assembly

    DOEpatents

    Phillips, H.L.; Elliott, T.S.

    1997-03-11

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly has a superconducting metal-ceramic design. The srf window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  13. Superconductive radiofrequency window assembly

    DOEpatents

    Phillips, H.L.; Elliott, T.S.

    1998-05-19

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The SRF window assembly has a superconducting metal-ceramic design. The SRF window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the SRF window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  14. Energy-efficient windows

    SciTech Connect

    1994-10-01

    This fact sheet describes energy efficient windows for the reduction of home heating and cooling energy consumption. It discusses controlling air leaks by caulking and weatherstripping and by replacing window frames. Reducing heat loss and condensation is discussed by describing the types of glazing materials, the number of glass and air spaces, frame and spacer materials, and the use of movable insulation (shutters, drapes, etc.). A resource list is provided for further information.

  15. The deep oval window.

    PubMed

    Kapur, T R

    1991-09-01

    This article presents the results of an analysis of the variable and surgically important relationship between the oval window, the fossular walls and the related posterior tympanic recesses in 50 temporal bones. The visual impressions of superficial and deep oval windows seem to correspond fairly closely to the depth of the inferior wall of the fossula fenestra vestibuli (FFV). The depth of the superior and anterior walls of the FFV by themselves, did not appear to have such a dominating relationship in determining the deep oval window. There does not appear to be a well defined posterior wall in the vast majority of the specimens (86 per cent). In the event of scar tissue forming between the superior, inferior and anterior walls, the gap between the postero-superior part of the promontory and the posterior tympanic wall (posterior communication) could allow aeration of the region of the deep oval window in such an instance. Closure of this gap by a solid shelf of ponticulus or scar tissue could cause a localized malaeration of the fossula in most cases of deep oval windows. This is an entirely new concept of the likely problems of malaeration of a deep oval window which could arise due to anatomical variations and of the possible safety valve mechanism which could prevent such malaeration and its consequences. PMID:1919338

  16. High Performance Window Retrofit

    SciTech Connect

    Shrestha, Som S; Hun, Diana E; Desjarlais, Andre Omer

    2013-12-01

    The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

  17. 16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO CENTER, OPEN PANEL DOOR FROM BEDROOM NUMBER ONE AT EXTREME PHOTO LEFT, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON NORTH WALL AT PHOTO RIGHT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  18. 9. INTERIOR OF LIVING ROOM SHOWING OPEN 6LIGHT FRONT ENTRY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR OF LIVING ROOM SHOWING OPEN 6-LIGHT FRONT ENTRY DOOR, OPEN PANEL DOOR TO BEDROOM NUMBER ONE, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON REAR WALL AT PHOTO LEFT CENTER. FIREPLACE ORIGINALLY OCCUPIED SPACE UNDER ROUND HEATER VENT HOLE AT PHOTO LEFT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  19. 10. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER ONE AT PHOTO CENTER, AND SECOND 6 LIGHT OVER 1-LIGHT SASH WINDOW ON REAR WALL AT PHOTO LEFT. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  20. 15. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO VESTIBULE AT PHOTO RIGHT, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW THROUGH SOUTH WALL AT PHOTO LEFT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  1. 8. INTERIOR OF LIVING ROOM SHOWING 6LIGHT FRONT ENTRY DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR OF LIVING ROOM SHOWING 6-LIGHT FRONT ENTRY DOOR AND TWO 6-LIGHT OVER 1-LIGHT SASH WINDOWS TO PHOTO RIGHT OF FRONT DOOR OVERLOOKING PORCH. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  2. 14. INTERIOR OF BEDROOM NUMBER TWO SHOWING FLOOR TO CEILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR OF BEDROOM NUMBER TWO SHOWING FLOOR TO CEILING BUILT-IN CLOSET OCCUPING ENTIRE NORTH END OF ROOM, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON EAST WALL. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  3. 13. INTERIOR OF BEDROOM NUMBER ONE SHOWING 6LIGHT OVER 1 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR OF BEDROOM NUMBER ONE SHOWING 6-LIGHT OVER 1 LIGHT SASH WINDOW ON EAST WALL AND OPEN PANEL DOOR TO BATHROOM ON NORTH WALL. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  4. 9. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER ONE AT PHOTO RIGHT, 6-LIGHT OVER 1 LIGHT SASH WINDOW ON REAR WALL AT PHOTO LEFT CENTER. FIREPLACE ORIGINALLY OCCUPIED SPACE UNDER ROUND HEATER VENT HOLE AT PHOTO LEFT. VIEW TO NORTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  5. 9. INTERIOR OF LIVING ROOM SHOWING OPEN 6LIGHT FRONT ENTRY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR OF LIVING ROOM SHOWING OPEN 6-LIGHT FRONT ENTRY DOOR AND TWO 6-LIGHT OVER 1-LIGHT SASH WINDOWS OVERLOOKING FRONT ENTRY STEPS. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  6. 7. INTERIOR LIVING ROOM SHOWING 6LIGHT FRONT DOOR FLANKED BY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR LIVING ROOM SHOWING 6-LIGHT FRONT DOOR FLANKED BY ONE OF TWO 6-LIGHT OVER 1-LIGHT SASH WINDOWS AT PHOTO RIGHT, AND OPEN DOORWAY TO BEDROOM NUMBER ONE (AND BEDROOM NUMBER TWO IN BACKGROUND) AT PHOTO LEFT. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  7. 1. Light tower and fog signal house, view south southeast, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Light tower and fog signal house, view south southeast, east and north sides of tower, northeast and northwest sides of signal house - Libby Island Light Station, At southern tip of Libby Island at entrance to Machias Bay, Machiasport, Washington County, ME

  8. 46 CFR 111.75-1 - Lighting feeders.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Lighting feeders. 111.75-1 Section 111.75-1 Shipping... REQUIREMENTS Lighting Circuits and Protection § 111.75-1 Lighting feeders. (a) Passenger vessels. On a passenger vessel with fire bulkheads forming main vertical and horizontal fire zones, the...

  9. 46 CFR 111.75-1 - Lighting feeders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Lighting feeders. 111.75-1 Section 111.75-1 Shipping... REQUIREMENTS Lighting Circuits and Protection § 111.75-1 Lighting feeders. (a) Passenger vessels. On a passenger vessel with fire bulkheads forming main vertical and horizontal fire zones, the...

  10. 46 CFR 111.75-1 - Lighting feeders.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Lighting feeders. 111.75-1 Section 111.75-1 Shipping... REQUIREMENTS Lighting Circuits and Protection § 111.75-1 Lighting feeders. (a) Passenger vessels. On a passenger vessel with fire bulkheads forming main vertical and horizontal fire zones, the...

  11. 46 CFR 111.75-1 - Lighting feeders.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Lighting feeders. 111.75-1 Section 111.75-1 Shipping... REQUIREMENTS Lighting Circuits and Protection § 111.75-1 Lighting feeders. (a) Passenger vessels. On a passenger vessel with fire bulkheads forming main vertical and horizontal fire zones, the...

  12. 46 CFR 111.75-1 - Lighting feeders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Lighting feeders. 111.75-1 Section 111.75-1 Shipping... REQUIREMENTS Lighting Circuits and Protection § 111.75-1 Lighting feeders. (a) Passenger vessels. On a passenger vessel with fire bulkheads forming main vertical and horizontal fire zones, the...

  13. High performance sapphire windows

    NASA Technical Reports Server (NTRS)

    Bates, Stephen C.; Liou, Larry

    1993-01-01

    High-quality, wide-aperture optical access is usually required for the advanced laser diagnostics that can now make a wide variety of non-intrusive measurements of combustion processes. Specially processed and mounted sapphire windows are proposed to provide this optical access to extreme environment. Through surface treatments and proper thermal stress design, single crystal sapphire can be a mechanically equivalent replacement for high strength steel. A prototype sapphire window and mounting system have been developed in a successful NASA SBIR Phase 1 project. A large and reliable increase in sapphire design strength (as much as 10x) has been achieved, and the initial specifications necessary for these gains have been defined. Failure testing of small windows has conclusively demonstrated the increased sapphire strength, indicating that a nearly flawless surface polish is the primary cause of strengthening, while an unusual mounting arrangement also significantly contributes to a larger effective strength. Phase 2 work will complete specification and demonstration of these windows, and will fabricate a set for use at NASA. The enhanced capabilities of these high performance sapphire windows will lead to many diagnostic capabilities not previously possible, as well as new applications for sapphire.

  14. Adaptive Liquid Crystal Windows

    SciTech Connect

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of

  15. BERKELEY LAB WINDOW

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records frommore » IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of

  16. BERKELEY LAB WINDOW

    SciTech Connect

    Curcija, Dragan Charlie; Zhu, Ling; Czarnecki, Stephen; Mitchell, Robin D.; Kohler, Christian; Vidanovic, Simon V.; Huizenga, Charlie

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records from IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of the

  17. Mast Cell-Deficient W-sash c-kit Mutant KitW-sh/W-sh Mice as a Model for Investigating Mast Cell Biology in Vivo

    PubMed Central

    Grimbaldeston, Michele A.; Chen, Ching-Cheng; Piliponsky, Adrian M.; Tsai, Mindy; Tam, See-Ying; Galli, Stephen J.

    2005-01-01

    Mice carrying certain mutations in the white spotting (W) locus (ie, c-kit) exhibit reduced c-kit tyrosine kinase-dependent signaling that results in mast cell deficiency and other phenotypic abnormalities. The c-kit mutations in KitW/W-v mice impair melanogenesis and result in anemia, sterility, and markedly reduced levels of tissue mast cells. In contrast, KitW-sh/W-sh mice, bearing the W-sash (Wsh) inversion mutation, have mast cell deficiency but lack anemia and sterility. We report that adult KitW-sh/W-sh mice had a profound deficiency in mast cells in all tissues examined but normal levels of major classes of other differentiated hematopoietic and lymphoid cells. Unlike KitW/W-v mice, KitW-sh/W-sh mice had normal numbers of TCRγδ intraepithelial lymphocytes in the intestines and did not exhibit a high incidence of idiopathic dermatitis, ulcers, or squamous papillomas of the stomach, but like KitW/W-v mice, they lacked interstitial cells of Cajal in the gut and exhibited bile reflux into the stomach. Systemic or local reconstitution of mast cell populations was achieved in nonirradiated adult KitW-sh/W-sh mice by intravenous, intraperitoneal, or intradermal injection of wild-type bone marrow-derived cultured mast cells but not by transplantation of wild-type bone marrow cells. Thus, KitW-sh/W-sh mice represent a useful model for mast cell research, especially for analyzing mast cell function in vivo. PMID:16127161

  18. Mast cell-deficient W-sash c-kit mutant Kit W-sh/W-sh mice as a model for investigating mast cell biology in vivo.

    PubMed

    Grimbaldeston, Michele A; Chen, Ching-Cheng; Piliponsky, Adrian M; Tsai, Mindy; Tam, See-Ying; Galli, Stephen J

    2005-09-01

    Mice carrying certain mutations in the white spotting (W) locus (ie, c-kit) exhibit reduced c-kit tyrosine kinase-dependent signaling that results in mast cell deficiency and other phenotypic abnormalities. The c-kit mutations in Kit(W/W-v) mice impair melanogenesis and result in anemia, sterility, and markedly reduced levels of tissue mast cells. In contrast, Kit(W-sh/W-sh) mice, bearing the W-sash (W(sh)) inversion mutation, have mast cell deficiency but lack anemia and sterility. We report that adult Kit(W-sh/W-sh) mice had a profound deficiency in mast cells in all tissues examined but normal levels of major classes of other differentiated hematopoietic and lymphoid cells. Unlike Kit(W/W-v) mice, Kit(W-sh/W-sh) mice had normal numbers of TCR gammadelta intraepithelial lymphocytes in the intestines and did not exhibit a high incidence of idiopathic dermatitis, ulcers, or squamous papillomas of the stomach, but like Kit(W/W-v) mice, they lacked interstitial cells of Cajal in the gut and exhibited bile reflux into the stomach. Systemic or local reconstitution of mast cell populations was achieved in nonirradiated adult Kit(W-sh/W-sh) mice by intravenous, intraperitoneal, or intradermal injection of wild-type bone marrow-derived cultured mast cells but not by transplantation of wild-type bone marrow cells. Thus, Kit(W-sh/W-sh) mice represent a useful model for mast cell research, especially for analyzing mast cell function in vivo. PMID:16127161

  19. "Stained Glass" Landscape Windows

    ERIC Educational Resources Information Center

    Vannata, Janine

    2008-01-01

    Both adults and children alike marvel at the grand vivid stained-glass windows created by American artist Louis Comfort Tiffany. Today he is commonly recognized as one of America's most influential designers and artists throughout the last nineteenth and early twentieth century. In the lesson described in this article, students created their own…

  20. Exploring Shop Window Displays

    ERIC Educational Resources Information Center

    Christopoulou, Martha

    2011-01-01

    Using visual resources from everyday life in art lessons can enrich students' knowledge about the creation of visual images, artifacts, and sites, and develop their critical understanding about the cultural impact of these images and their effects on people's lives. Through examining an exhibition in the windows of Selfridges department store in…

  1. Opening the Literature Window

    ERIC Educational Resources Information Center

    Jago, Carol

    2012-01-01

    Great literature gives students a window to other places and times, but it often requires students to step outside their comfort zones and take on challenges they wouldn't usually attempt. Unfortunately, research shows that many schools are not assigning literature that pushes students beyond their current reading level. Jago encourages teachers…

  2. Foamglass solar window collector

    NASA Astrophysics Data System (ADS)

    Grande, P. C.

    Solar heating of a living area by means of a foamglass window collector is reported. The collector was built with readily available materials available at most local hardware stores. The payback period was found to be 3.7 years, slightly longer than anticipated.

  3. Apollo window meteoroid experiment

    NASA Technical Reports Server (NTRS)

    Cour-Palais, B. G.; Flaherty, R. E.; Brown, M. L.

    1972-01-01

    Apollo window meteoroid experiment for obtaining data from crater counts and analysis of meteoroid residue combined with fused glass in described. A preliminary estimate of the flux resulting from seven Apollo spacecraft is found to be in agreement with the Surveyor 3 data, but is lower than the model environment.

  4. Software: Looking Through WINDOW.

    ERIC Educational Resources Information Center

    Classroom Computer News, 1983

    1983-01-01

    Reviews the educational value, design quality, and ease of use of "WINDOW," an educational "magazine" on a disk for the Apple II/IIe microcomputer. Indicates that the articles, software reviews, and other informative material are greatly enhanced by sound, graphics, and the chance to try out reviewed programs. (JN)

  5. Candles in Our Windows

    ERIC Educational Resources Information Center

    McGrath, Kathryn

    2005-01-01

    "Candles in Our Windows"--also titled "Nightlights"--is a play developed for elementary and middle school students about how residents in Billings, Montana, took a stand against hate. Last March, the 6th-grade students of Woodland Elementary School in New Jersey performed an early version of the play based on a children's book, "The Christmas…

  6. Migration to Windows NT.

    ERIC Educational Resources Information Center

    Doles, Daniel T.

    In the constantly changing world of technology, migration is not only inevitable but many times necessary for survival, especially when the end result is simplicity for both users and IT support staff. This paper describes the migration at Franklin College (Indiana). It discusses the reasons for selecting Windows NT, the steps taken to complete…

  7. Windows to Art Excitement.

    ERIC Educational Resources Information Center

    Laird, Shirley; Crumpecker, Cheryl

    2003-01-01

    Describes an art project that aimed to bring more attention to an art program. Explains that the students created themed murals on the windows of the art classroom, such as a "Jungle,""Ocean,""Masterpiece Paintings," and "Rainforest Tree Frogs." Discusses how the murals were created. (CMK)

  8. Microwave Workshop for Windows.

    ERIC Educational Resources Information Center

    White, Colin

    1998-01-01

    "Microwave Workshop for Windows" consists of three programs that act as teaching aid and provide a circuit design utility within the field of microwave engineering. The first program is a computer representation of a graphical design tool; the second is an accurate visual and analytical representation of a microwave test bench; the third is a more…

  9. Windows and lighting program

    SciTech Connect

    Not Available

    1990-06-01

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  10. Windows into Art Classrooms.

    ERIC Educational Resources Information Center

    Grauer, Kit, Ed.

    1995-01-01

    An editorial by Kit Grauer introduces this collection of articles which establish that there is no such thing as a simple definition of art education even within one culture, and that people's views can be reflected by art educators across the world. The first article, "A Window on Three Singapore Art Classrooms" (Jane Chia; John Matthews; Paul…

  11. Superconductive radiofrequency window assembly

    DOEpatents

    Phillips, Harry Lawrence; Elliott, Thomas S.

    1998-01-01

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  12. Superconducting radiofrequency window assembly

    DOEpatents

    Phillips, Harry L.; Elliott, Thomas S.

    1997-01-01

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  13. Double window viewing chamber assembly

    NASA Technical Reports Server (NTRS)

    Keller, V. W. (Inventor); Owen, R. B. (Inventor); Elkins, B. R. (Inventor); White, W. T. (Inventor)

    1986-01-01

    A viewing chamber which permits observation of a sample retained therein includes a pair of double window assemblies mounted in opposed openings in the walls thereof so that a light beam can directly enter and exit from the chamber. A flexible mounting arrangement for the outer windows of the window assemblies enables the windows to be brought into proper alignment. An electrical heating arrangement prevents fogging of the outer windows whereas desiccated air in the volume between the outer and inner windows prevents fogging of the latter.

  14. VIEW OF THREE SOUTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE SOUTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED ADJACENT TO THE ALTER. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  15. VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED ADJACENT TO THE ALTAR. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  16. VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED JUST BELOW THE CHOIR LOFT. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  17. details: window jamb from first period of construction; window jamb, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    details: window jamb from first period of construction; window jamb, sill profile, and transom profile from second period of construction - Joseph Poffenberger Farm, House, 17834 Mansfield Avenue, Sharpsburg, Washington County, MD

  18. Lens window simplifies TDL housing

    NASA Technical Reports Server (NTRS)

    Robinson, D. M.; Rowland, C. W.

    1979-01-01

    Lens window seal in tunable-diode-laser housing replaces plan parallel window. Lens seals housing and acts as optical-output coupler, thus eliminating need for additional reimaging or collimating optics.

  19. A Window-Washing Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2010-01-01

    Skyscrapers sure do have a lot of windows, and these windows are cleaned and checked regularly. All this takes time, money, and puts workers at potential risk. Might there be a better way to do it? In this article, the author discusses a window-washing challenge and describes how students can tackle this task, pick up the challenge, and creatively…

  20. Beam Window for Pressure Chambers

    NASA Technical Reports Server (NTRS)

    Bransford, J. W.; Austin, J. G., Jr.

    1985-01-01

    Window resists products of combustion experiments. Sodium chloride window seals over chamber pressures from 0.1 to 13.8 MPa while absorbing minimal energy from CO2 laser beam that passes through it into chamber. Window inexpensive and easily replacable.

  1. Windows: The Benefits Are Clear.

    ERIC Educational Resources Information Center

    Sturgeon, Julie

    1999-01-01

    Discusses the importance of specifying windows in a school renovation or building project in order to energize a campus. Explains how windows are psychologically uplifting, how glass accentuates excitement and its shapes signal stability, and how windows convey the institution's confidence in the present. (GR)

  2. 10. INTERIOR OF WEST END OF BEDROOM NUMBER ONE SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR OF WEST END OF BEDROOM NUMBER ONE SHOWING ORIGINAL LOCATION OF BATHROOM AND WALK-IN CLOSET. SMALL 1-LIGHT OVER 1-LIGHT SASH WINDOW AT PHOTO LEFT WAS ORIGINALLY ON BACK WALL OF CLOSET. BATHROOM PROJECTION ON NORTH WALL IS NOW OCCUPIED BY RECESSED BUILT-IN CLOSET SHOWN AT PHOTO RIGHT CENTER. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  3. Sunlight Responsive Thermochromic Window System

    SciTech Connect

    Millett, F,A; Byker,H, J

    2006-10-27

    Pleotint has embarked on a novel approach with our Sunlight Responsive Thermochromic, SRT™, windows. We are integrating dynamic sunlight control, high insulation values and low solar heat gain together in a high performance window. The Pleotint SRT window is dynamic because it reversibly changes light transmission based on thermochromics activated directly by the heating effect of sunlight. We can achieve a window package with low solar heat gain coefficient (SHGC), a low U value and high insulation. At the same time our windows provide good daylighting. Our innovative window design offers architects and building designers the opportunity to choose their desired energy performance, excellent sound reduction, external pane can be self-cleaning, or a resistance to wind load, blasts, bullets or hurricanes. SRT windows would provide energy savings that are estimated at up to 30% over traditional window systems. Glass fabricators will be able to use existing equipment to make the SRT window while adding value and flexibility to the basic design. Glazing installers will have the ability to fit the windows with traditional methods without wires, power supplies and controllers. SRT windows can be retrofit into existing buildings,

  4. Windows on the axion

    SciTech Connect

    Turner, M.S.

    1989-04-01

    Peccei-Quinn symmetry with attendant axion is a most compelling, and perhaps the most minimal, extension of the standard model, as it provides a very elegant solution to the nagging strong CP-problem associated with the THETA vacuum structure of QCD. However, particle physics gives little guidance as to the axion mass; a priori, the plausible values span the range: 10/sup /minus/12/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup 6/ eV, some 18 orders-of-magnitude. Axions have a host of interesting astrophysical and cosmological effects, including, modifying the evolution of stars of all types (our sun, red giants, white dwarfs, and neutron stars), contributing significantly to the mass density of the Universe today, and producing detectable line radiation through the decays of relic axions. Consideration of these effects has probed 14 orders-of-magnitude in axion mass, and has left open only two windows for further exploration: 10/sup /minus/6/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup /minus/3/ eV and 1 eV /approx lt/ m/sub a/ /approx lt/ 5 eV (hadronic axions only). Both these windows are accessible to experiment, and a variety of very interesting experiments, all of which involve ''heavenly axions,'' are being planned or are underway. 58 refs., 6 figs., 1 tab.

  5. Window defect planar mapping technique

    NASA Technical Reports Server (NTRS)

    Minton, F. R.; Minton, U. O. (Inventor)

    1976-01-01

    A method of planar mapping defects in a window having an edge surface and a planar surface. The method is comprised of steps for mounting the window on a support surface. Then a light sensitive paper is placed adjacent to the window surface. A light source is positioned adjacent to the window edge. The window is then illuminated with the source of light for a predetermined interval of time. Defects on the surface of the glass, as well as in the interior of the glass are detected by analyzing the developed light sensitive paper. The light source must be in the form of optical fibers or a light tube whose light transmitting ends are placed near the edge surface of the window.

  6. Window Observational Research Facility (WORF)

    NASA Technical Reports Server (NTRS)

    Pelfrey, Joseph; Sledd, Annette

    2007-01-01

    This viewgraph document concerns the Window Observational Research Facility (WORF) Rack, a unique facility designed for use with the US Lab Destiny Module window. WORF will provide valuable resources for Earth Science payloads along with serving the purpose of protecting the lab window. The facility can be used for remote sensing instrumentation test and validation in a shirt sleeve environment. WORF will also provide a training platform for crewmembers to do orbital observations of other planetary bodies. WORF payloads will be able to conduct terrestrial studies utilizing the data collected from utilizing WORF and the lab window.

  7. Subject Responses to Electrochromic Windows

    SciTech Connect

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-03-03

    Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

  8. INTERIOR DETAIL, RETRACTABLE WINDOW SHUTTERS, VENETIAN WINDOW IN THE SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL, RETRACTABLE WINDOW SHUTTERS, VENETIAN WINDOW IN THE SOUTHEAST CABINET. (NOTE THE MIRRORED PANEL IN THE FORWARD SHUTTER’S LOWER SECTION. DURING THE HAMILTONIAN OCCUPANCY, MIRRORS LIKE THESE WERE USED LIBERALLY THROUGHOUT THE HOUSE’S PUBLIC ROOMS - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  9. Destiny's Earth Observation Window

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Astronaut Michael J. Bloomfield, STS-110 mission commander, looks through the Earth observation window in the Destiny laboratory aboard the International Space Station (ISS). The STS-110 mission prepared the ISS for future spacewalks by installing and outfitting the S0 (S-zero) truss and the Mobile Transporter. The 43-foot-long S0 Truss, weighing in at 27,000 pounds, was the first of 9 segments that will make up the Station's external framework that will eventually stretch 356 feet (109 meters), or approximately the length of a football field. This central truss segment also includes a flatcar called the Mobile Transporter and rails that will become the first 'space railroad,' which will allow the Station's robotic arm to travel up and down the finished truss for future assembly and maintenance. The completed truss structure will hold solar arrays and radiators to provide power and cooling for additional international research laboratories from Japan and Europe that will be attached to the Station. Milestones of the STS-110 mission included the first time the ISS robotic arm was used to maneuver spacewalkers around the Station and marked the first time all spacewalks were based out of the Station's Quest Airlock. It was also the first Shuttle to use three Block II Main Engines. The Space Shuttle Orbiter Atlantis, STS-110 mission, was launched April 8, 2002 and returned to Earth April 19, 2002.

  10. Prism Window for Optical Alignment

    NASA Technical Reports Server (NTRS)

    Tang, Hong

    2008-01-01

    A prism window has been devised for use, with an autocollimator, in aligning optical components that are (1) required to be oriented parallel to each other and/or at a specified angle of incidence with respect to a common optical path and (2) mounted at different positions along the common optical path. The prism window can also be used to align a single optical component at a specified angle of incidence. Prism windows could be generally useful for orienting optical components in manufacture of optical instruments. "Prism window" denotes an application-specific unit comprising two beam-splitter windows that are bonded together at an angle chosen to obtain the specified angle of incidence.

  11. Tokamak physics experiment: Diagnostic windows study

    SciTech Connect

    Merrigan, M.; Wurden, G.A.

    1995-11-01

    We detail the study of diagnostic windows and window thermal stress remediation in the long-pulse, high-power Tokamak Physics Experiment (TPX) operation. The operating environment of the TPX diagnostic windows is reviewed, thermal loads on the windows estimated, and cooling requirements for the windows considered. Applicable window-cooling technology from other fields is reviewed and its application to the TPX windows considered. Methods for TPX window thermal conditioning are recommended, with some discussion of potential implementation problems provided. Recommendations for further research and development work to ensure performance of windows in the TPX system are presented.

  12. Holography through optically active windows

    NASA Technical Reports Server (NTRS)

    Decker, A. J.

    1979-01-01

    By using two orthogonally polarized reference beams, holograms can be recorded through stressed windows and the reconstructed virtual image will show no stress pattern. As shown analytically, the stress-pattern-free hologram is recordable for any polarization state of the object illumination. Hence, the more efficient nondepolarizing diffuser can be used in performing holography through stressed windows if two reference beams are used. Results are presented for a pair of machined polysulfone windows intended for use in a holographic flow-visualization setup in a single-stage-compressor test rig.

  13. Window Design for Manned Spaceflight

    NASA Astrophysics Data System (ADS)

    Lamoure, Richard; Kitchingman, Ian; Novo, Francisco; Sinnema, Gerben

    2012-07-01

    The Window Design for Manned Spacecraft (WDM) project being undertaken by Magna Parva Ltd, under contract with the European Space Agency, aims to develop and improve the current structural integrity verification program for manned spacecraft pressurised windows. A critical review of the existing requirements and current state-of-the-art in spacecraft window design, materials and verification practice is conducted. Possible areas for improvement are identified. An experimental test programme is designed to perform and assess mechanical characterisation methods at material level. Tests are intended to increase familiarity with material testing methods and investigate the effects of sample size, surface finish and load type on material characterisation. Novel methods and their applicability are investigated. Results of characterisation testing will be employed in the design and verification of a breadboard window.

  14. Window-closing safety system

    DOEpatents

    McEwan, T.E.

    1997-08-26

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only an inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window. 5 figs.

  15. Window-closing safety system

    DOEpatents

    McEwan, Thomas E.

    1997-01-01

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only and inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window.

  16. A window on urban sustainability

    SciTech Connect

    Stigt, Rien van; Driessen, Peter P.J.; Spit, Tejo J.M.

    2013-09-15

    Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of ‘decision windows’ can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: • Decision-making about sustainable urban development occurs in networks. • The concept of ‘decision windows’ was further elaborated. • Decision windows help understand how environmental interests enter decision-making. • Decision windows can, to some extent, be influenced.

  17. Extending the X Window System

    SciTech Connect

    Brenkosh, J.P.

    1993-12-23

    The X Window System was originally developed in 1984 at Massachusetts Institute of Technology. It provides client-server computing functionality and also facilitates the establishment of a distributed computing environment. Since its inception the X Window System has undergone many enhancements. Despite these enhancements there will always be a functionality desired in the standard released version of X that is not supported or commercially or academically available. The developers of the X Window System have designed it in such a way that it is possible to add functionality that is not included in the standard release. This is called an extension. Extensions are one method used to develop a customized version of the X Window System to support a specialized application. This report presents the mechanics of adding an extension and examines a particular extension that was developed at Sandia National Laboratories to support data compression in X Windows which was one aspect of the Desktop Video and Collaborative Engineering Laboratory Directed Research and Development (LDRD).

  18. Switchable Materials for Smart Windows.

    PubMed

    Wang, Yang; Runnerstrom, Evan L; Milliron, Delia J

    2016-06-01

    This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting. PMID:27023660

  19. 16 CFR 455.3 - Window form.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Window form. 455.3 Section 455.3 Commercial... Window form. (a) Form given to buyer. Give the buyer of a used vehicle sold by you the window form...) Incorporated into contract. The information on the final version of the window form is incorporated into...

  20. Windows and daylighting: A brighter outlook

    SciTech Connect

    Not Available

    1994-11-01

    This is an overview of energy efficient window glazing and framing technology. The topics of the report include: windows and energy use, a point of view; a challenging federal opportunity; DOE window research; advanced optical technologies such as spectrally selective glazing, switchable glazing, super windows with low-emissivity coatings and noble gas fills; and performance evaluation and design tools.

  1. A robust industrial accelerator window design

    NASA Astrophysics Data System (ADS)

    Schuetz, Marlin N.; Vroom, David A.

    1998-06-01

    An improved design for the thin metal foil window associated with high power industrial accelarators has been developed and tested. This design, which employs specifically shaped flanges, greatly reduce the stresses normally present on accelerators windows and has lead to longer window lifetime and a better means of window cooling.

  2. Music@Microsoft.Windows: Composing Ambience

    ERIC Educational Resources Information Center

    Rickert, Thomas

    2010-01-01

    It is well known, of course, that all Windows versions except for 3.1 have a brief (four to six second) piece of music indicating that Windows is booted and ready for use. While the music may indicate Windows has booted, it bears no immediately discernable relation to the various uses we might actually put Windows to--working, gaming,…

  3. 17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO BATHROOM NUMBER ONE AT EXTREME PHOTO LEFT, OPEN PANEL DOOR TO THE WALK-IN CLOSET AT PHOTO CENTER LEFT, OPEN PANEL DOOR TO HALL AT PHOTO CENTER RIGHT, AND A 6-LIGHT OVER 1-LIGHT SASH WINDOW ON THE WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA

  4. The Benefits of Aluminum Windows.

    ERIC Educational Resources Information Center

    Goyal, R. C.

    2002-01-01

    Discusses benefits of aluminum windows for college construction and renovation projects, including that aluminum is the most successfully recycled material, that it meets architectural glass deflection standards, that it has positive thermal energy performance, and that it is a preferred exterior surface. (EV)

  5. Creating a Window Cleaner Company.

    ERIC Educational Resources Information Center

    Sarquis, A. M.; And Others

    1995-01-01

    Provides a description of a project used in the Cool Science and Technology Camps in which campers are presented with the challenge of developing and marketing their own brand of window cleaner. Topics such as chemistry, marketing, and cost analysis are intertwined as students prepare and plan their approach to product development. (DDR)

  6. Notes on UHV beryllium windows

    SciTech Connect

    Hartman, P.L.

    1986-10-01

    Techniques are described for making large ultrahigh vacuum beryllium windows for use in synchrotron radiation installations. Procedures are given for affecting both hard brazed seals and demountable seals involving either lead or copper gaskets. Brazed seals can be made to either stainless steel or copper. Possible alternative methods are suggested.

  7. Closing the Windows on Opportunity.

    ERIC Educational Resources Information Center

    Coombs, Norman

    1995-01-01

    The rapid adoption of graphic user interface (GUI), as indicated by Microsoft's Windows95 and the Internet's increased use of graphics, is threatening information technology opportunities for people with disabilities. Recent legislation requires that schools provide access to computers and information technology, and producers of Mosaic are…

  8. Removable Window System for Space Vehicles

    NASA Technical Reports Server (NTRS)

    Grady, James P. (Inventor)

    2015-01-01

    A window system for a platform comprising a window pane, a retention frame, and a biasing system. The window pane may be configured to contact a sealing system. The retention frame may be configured to contact the sealing system and hold the window pane against the support frame. The biasing system may be configured to bias the retention frame toward the support frame while the support frame and the retention frame are in a configuration that holds the window pane. Removal of the biasing system may cause the retention frame and the window pane to be removable.

  9. Measured winter performance of storm windows

    SciTech Connect

    Klems, Joseph H.

    2002-08-23

    Direct comparison measurements were made between various prime/storm window combinations and a well-weatherstripped, single-hung replacement window with a low-E selective glazing. Measurements were made using an accurate outdoor calorimetric facility with the windows facing north. The doublehung prime window was made intentionally leaky. Nevertheless, heat flows due to air infiltration were found to be small, and performance of the prime/storm combinations was approximately what would be expected from calculations that neglect air infiltration. Prime/low-E storm window combinations performed very similarly to the replacement window. Interestingly, solar heat gain was not negligible, even in north-facing orientation.

  10. 1. Light tower/keeper's house and abandoned light tower, view northwest, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Light tower/keeper's house and abandoned light tower, view northwest, south southeast and east northeast sides - Matinicus Rock Light Station, Matinicus Island, on Matinicus Rock, Matinicus, Knox County, ME

  11. Windows in the Milky Way

    NASA Technical Reports Server (NTRS)

    Waller, William H.; Tacconi-Garman, Lowell Evan; Boulanger, Francois; Okumura, Koryo

    1991-01-01

    The objectives were twofold: (1) to study the IRAS emission levels in the vicinity of Baade's Window and in other optically transparent regions near the Galactic Center; and (2) to study the IRAS emission levels along sightlines in the Milky Way that exhibit very little CO emission. Tests were attempted to see whether the optically transparent 'windows' near the Galactic center can be identified (as FIR-weak regions) in the IRAS data base; and if so, whether the CO weak regions found elsewhere in the Milky Way represent similarly FIR weak and thus optically transparent sightlines through the Galaxy. The CO weak regions were also targeted in an effort to study the diffuse intercloud dust and its warming by the interstellar radiation field.

  12. Electrochromic Windows: Advanced Processing Technology

    SciTech Connect

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  13. RUGGED CERAMIC WINDOW FOR RF APPLICATIONS

    SciTech Connect

    MIKE NEUBAUER

    2012-11-01

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  14. Rugged Ceramic Window for RF Applications

    SciTech Connect

    Neubauer, Michael; Johnson, Rolland P.; Rimmer, Robert; Elliot, Tom; Stirbet, Mircea

    2009-05-04

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  15. Beryllium window for an APS diagnostics beamline

    SciTech Connect

    Sheng, I.C.; Yang, B.X.; Sharma, Y.S.

    1997-09-01

    A beryllium (Be) window for an Advanced Photon Source (APS) diagnostics beamline has been designed and built. The window, which has a double concave axisymmetrical profile with a thickness of 0.5 mm at the center, receives 160 W/mm{sup 2} (7 GeV/100 mA stored beam) from an undulator beam. The window design as well as thermal and thermomechanical analyses, including thermal buckling of the Be window, are presented.

  16. Space station proximity operations and window design

    NASA Technical Reports Server (NTRS)

    Haines, Richard F.

    1988-01-01

    On-orbit proximity operations (PROX-OPS) consist of all extravehicular activity (EVA) within 1 km of the space station. Because of the potentially large variety of PROX-OPS, very careful planning for space station windows is called for and must consider a great many human factors. The following topics are discussed: (1) basic window design philosophy and assumptions; (2) the concept of the local horizontal - local vertical on-orbit; (3) window linear dimensions; (4) selected anthropomorphic considerations; (5) displays and controls relative to windows; and (6) full window assembly replacement.

  17. Purged window apparatus utilizing heated purge gas

    DOEpatents

    Ballard, Evan O.

    1984-01-01

    A purged window apparatus utilizing tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows, and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube. Use of this apparatus prevents backstreaming of gases under investigation which are flowing past the mouth of the mounting tube which would otherwise deposit on the windows. Lengthy spectroscopic investigations and analyses can thereby be performed without the necessity of interrupting the procedures in order to clean or replace contaminated windows.

  18. Rigid thin windows for vacuum applications

    DOEpatents

    Meyer, Glenn Allyn; Ciarlo, Dino R.; Myers, Booth Richard; Chen, Hao-Lin; Wakalopulos, George

    1999-01-01

    A thin window that stands off atmospheric pressure is fabricated using photolithographic and wet chemical etching techniques and comprises at least two layers: an etch stop layer and a protective barrier layer. The window structure also comprises a series of support ribs running the width of the window. The windows are typically made of boron-doped silicon and silicon nitride and are useful in instruments such as electron beam guns and x-ray detectors. In an electron beam gun, the window does not impede the electrons and has demonstrated outstanding gun performance and survivability during the gun tube manufacturing process.

  19. Durable coatings for IR windows

    NASA Astrophysics Data System (ADS)

    Goldman, Lee M.; Jha, Santosh K.; Gunda, Nilesh; Cooke, Rick; Agarwal, Neeta; Sastri, Suri A.; Harker, Alan; Kirsch, Jim

    2005-05-01

    Durable coatings of silicon-carbon-oxy-nitride (a.k.a. SiCON) are being developed to protect high-speed missile windows from the environmental loads during flight. Originally developed at Rockwell Scientific Corporation (RSC) these coatings exhibited substantial promise, but were difficult to deposit. Under a DoD DARPA SBIR Phase I program, Surmet Corporation, working closely with RSC, is depositing these coatings using an innovative vacuum vapor deposition process. High rate of coating deposition and the ease of manipulating the process variables, make Surmet"s process suitable for the deposition of substantially thick films (up to 30 μm) with precisely controlled chemistry. Initial work has shown encouraging results, and the refinement of the coating and coating process is still underway. Coupons of SiN and SiCON coatings with varying thickness on a variety of substrates such as Si-wafer, ZnS and ALON were fabricated and used for the study. This paper will present and discuss the results of SiN and SiCON coatings deposition and characterization (physical, mechanical and optical properties) as a basis for evaluating their suitability for high speed missile windows application.

  20. Interferometer for Space Station Windows

    NASA Technical Reports Server (NTRS)

    Hall, Gregory

    2003-01-01

    Inspection of space station windows for micrometeorite damage would be a difficult task insitu using current inspection techniques. Commercially available optical profilometers and inspection systems are relatively large, about the size of a desktop computer tower, and require a stable platform to inspect the test object. Also, many devices currently available are designed for a laboratory or controlled environments requiring external computer control. This paper presents an approach using a highly developed optical interferometer to inspect the windows from inside the space station itself using a self- contained hand held device. The interferometer would be capable as a minimum of detecting damage as small as one ten thousands of an inch in diameter and depth while interrogating a relatively large area. The current developmental state of this device is still in the proof of concept stage. The background section of this paper will discuss the current state of the art of profilometers as well as the desired configuration of the self-contained, hand held device. Then, a discussion of the developments and findings that will allow the configuration change with suggested approaches appearing in the proof of concept section.

  1. Downsampling Photodetector Array with Windowing

    NASA Technical Reports Server (NTRS)

    Patawaran, Ferze D.; Farr, William H.; Nguyen, Danh H.; Quirk, Kevin J.; Sahasrabudhe, Adit

    2012-01-01

    In a photon counting detector array, each pixel in the array produces an electrical pulse when an incident photon on that pixel is detected. Detection and demodulation of an optical communication signal that modulated the intensity of the optical signal requires counting the number of photon arrivals over a given interval. As the size of photon counting photodetector arrays increases, parallel processing of all the pixels exceeds the resources available in current application-specific integrated circuit (ASIC) and gate array (GA) technology; the desire for a high fill factor in avalanche photodiode (APD) detector arrays also precludes this. Through the use of downsampling and windowing portions of the detector array, the processing is distributed between the ASIC and GA. This allows demodulation of the optical communication signal incident on a large photon counting detector array, as well as providing architecture amenable to algorithmic changes. The detector array readout ASIC functions as a parallel-to-serial converter, serializing the photodetector array output for subsequent processing. Additional downsampling functionality for each pixel is added to this ASIC. Due to the large number of pixels in the array, the readout time of the entire photodetector is greater than the time between photon arrivals; therefore, a downsampling pre-processing step is done in order to increase the time allowed for the readout to occur. Each pixel drives a small counter that is incremented at every detected photon arrival or, equivalently, the charge in a storage capacitor is incremented. At the end of a user-configurable counting period (calculated independently from the ASIC), the counters are sampled and cleared. This downsampled photon count information is then sent one counter word at a time to the GA. For a large array, processing even the downsampled pixel counts exceeds the capabilities of the GA. Windowing of the array, whereby several subsets of pixels are designated

  2. Challenger Center's Window on the Universe

    NASA Astrophysics Data System (ADS)

    Livengood, T. A.; Goldstein, J. J.; Smith, S.; Bobrowsky, M.; Radnofsky, M.; Perelmuter, J.-M.; Jaggar, L.

    2001-11-01

    Challenger Center for Space Science Education's Window on the Universe program aims to create a network of under-served communities across the nation dedicated to sustained science, math, and technology education. Window communities presently include Broken Arrow, OK; Muncie, IN; Moscow, ID; Nogales, AZ; Tuskegee, AL; Marquette, MI; Altamont, KS; Washington, D.C.; and other emerging sites. Window uses themes of human space flight and the space sciences as interdisciplinary means to inspire entire communities. Practicing scientists and engineers engaged in these disciplines are invited to volunteer to become a part of these communities for a week, each visitor reaching roughly 2000 K-12 students through individual classroom visits and Family Science Night events during an intense Window on the Universe Week. In the same Window Week, Challenger Center scientists and educators present a workshop for local educators to provide training in the use of a K-12 educational module built around a particular space science and exploration theme. Window communities follow a 3-year development: Year 1, join the network, experience Window Week presented by Challenger Center and visiting researchers; Year 2, same as Year 1 plus workshop on partnering with local organizations to develop sources of visiting researchers and to enhance connections with local resources; Year 3 and subsequent, the community stages its own Window Week, with Challenger Center providing new education modules and training workshops for "master educators" from the Window community, after which the master educators return home to conduct training workshops of their own. Challenger Center remains a resource and clearinghouse for Window communities to acquire experience, technical information, and opportunities for distance collaboration with other Window communities. Window on the Universe is dedicated to assessing degree of success vs. failure in each program component and as a whole, using pre- and post

  3. Hybrid window layer for photovoltaic cells

    SciTech Connect

    Deng, Xunming; Liao, Xianbo; Du, Wenhui

    2011-02-01

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  4. Hybrid window layer for photovoltaic cells

    SciTech Connect

    Deng, Xunming; Liao, Xianbo; Du, Wenhui

    2011-10-04

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  5. Hybrid window layer for photovoltaic cells

    DOEpatents

    Deng, Xunming

    2010-02-23

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  6. Lithography process window analysis with calibrated model

    NASA Astrophysics Data System (ADS)

    Zhou, Wenzhan; Yu, Jin; Lo, James; Liu, Johnson

    2004-05-01

    As critical-dimension shrink below 0.13 μm, the SPC (Statistical Process Control) based on CD (Critical Dimension) control in lithography process becomes more difficult. Increasing requirements of a shrinking process window have called on the need for more accurate decision of process window center. However in practical fabrication, we found that systematic error introduced by metrology and/or resist process can significantly impact the process window analysis result. Especially, when the simple polynomial functions are used to fit the lithographic data from focus exposure matrix (FEM), the model will fit these systematic errors rather than filter them out. This will definitely impact the process window analysis and determination of the best process condition. In this paper, we proposed to use a calibrated first principle model to do process window analysis. With this method, the systematic metrology error can be filtered out efficiently and give a more reasonable window analysis result.

  7. Laser sealed vacuum insulation window

    DOEpatents

    Benson, David K.; Tracy, C. Edwin

    1987-01-01

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the glass panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  8. Laser sealed vacuum insulating window

    DOEpatents

    Benson, D.K.; Tracy, C.E.

    1985-08-19

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the galss panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  9. Window Observational Rack Facility (WORF)

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Developed by Boeing, at the Marshall Space Flight Center (MSFC) Space Station Manufacturing building, the Window Observational Rack Facility (WORF) will help Space Station crews take some of the best photographs ever snapped from an orbiting spacecraft by eliminating glare and allowing researchers to control their cameras and other equipment from the ground. The WORF is designed to make the best possible use of the high-quality research window in the Space Station's U.S. Destiny laboratory module. Engineers at the MSFC proposed a derivative of the EXPRESS (Expedite the Processing of Experiments to the Space Station) Rack already used on the Space Station and were given the go-ahead. The EXPRESS rack can hold a wide variety of experiments and provide them with power, communications, data, cooling, fluids, and other utilities - all the things that Earth-observing experiment instruments would need. WORF will supply payloads with power, data, cooling, video downlink, and stable, standardized interfaces for mounting imaging instruments. Similar to specialized orbital observatories, the interior of the rack is sealed against light and coated with a special low-reflectant black paint, so payloads will be able to observe low-light-level subjects such as the faint glow of auroras. Cameras and remote sensing instruments in the WORF can be preprogrammed, controlled from the ground, or operated by a Station crewmember by using a flexible shroud designed to cinch tightly around the crewmember's waist. The WORF is scheduled to be launched aboard the STS-114 Space Shuttle mission in the year 2003.

  10. 7. INTERIOR OF VESTIBULE SHOWING OPEN 1LIGHT FRONT DOOR AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. INTERIOR OF VESTIBULE SHOWING OPEN 1-LIGHT FRONT DOOR AT PHOTO RIGHT, AND OPEN PANEL DOOR TO BEDROOM ADDITION (BEDROOM NUMBER TWO) AT PHOTO CENTER. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  11. Contoured insulation window for evacuated solar collector

    SciTech Connect

    Coppola, F. T.; Lentz, W. P.; Vandewoestine, R. V.

    1980-02-05

    An insulating contoured window is provided for use with an enclosed chamber such as an evacuated flat plate solar heat collector with the contoured solar window being of minimum thickness and supported solely about its peripheral edge portions. The window is contoured in both its longitudinal and transverse directions, such that in its longitudinal direction the window is composed of a plurality of sinusoidal corrugations whereas in its transverse direction the peaks of such corrugations are contoured in the form of paraboloids so that the structure may withstand the forces generated thereon by the atmosphere.

  12. Manufacturing of diamond windows for synchrotron radiation

    SciTech Connect

    Schildkamp, W.; Nikitina, L.

    2012-09-15

    A new diamond window construction is presented and explicit manufacturing details are given. This window will increase the power dissipation by about a factor of 4 over present day state of the art windows to absorb 600 W of power. This power will be generated by in-vacuum undulators with the storage ring ALBA operating at a design current of 400 mA. Extensive finite element (FE) calculations are included to predict the windows behavior accompanied by explanations for the chosen boundary conditions. A simple linear model was used to cross-check the FE calculations.

  13. Window type: 2x3 fixed multipaned steel window flanked by 1x3 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: 2x3 fixed multipaned steel window flanked by 1x3 multipaned steel casements. Concrete sill and spandrel also illustrated. Building 43, facing east - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  14. Glass-windowed ultrasound transducers.

    PubMed

    Yddal, Tostein; Gilja, Odd Helge; Cochran, Sandy; Postema, Michiel; Kotopoulis, Spiros

    2016-05-01

    In research and industrial processes, it is increasingly common practice to combine multiple measurement modalities. Nevertheless, experimental tools that allow the co-linear combination of optical and ultrasonic transmission have rarely been reported. The aim of this study was to develop and characterise a water-matched ultrasound transducer architecture using standard components, with a central optical window larger than 10 mm in diameter allowing for optical transmission. The window can be used to place illumination or imaging apparatus such as light guides, miniature cameras, or microscope objectives, simplifying experimental setups. Four design variations of a basic architecture were fabricated and characterised with the objective to assess whether the variations influence the acoustic output. The basic architecture consisted of a piezoelectric ring and a glass disc, with an aluminium casing. The designs differed in piezoelectric element dimensions: inner diameter, ID=10 mm, outer diameter, OD=25 mm, thickness, TH=4 mm or ID=20 mm, OD=40 mm, TH=5 mm; glass disc dimensions OD=20-50 mm, TH=2-4 mm; and details of assembly. The transducers' frequency responses were characterised using electrical impedance spectroscopy and pulse-echo measurements, the acoustic propagation pattern using acoustic pressure field scans, the acoustic power output using radiation force balance measurements, and the acoustic pressure using a needle hydrophone. Depending on the design and piezoelectric element dimensions, the resonance frequency was in the range 350-630 kHz, the -6 dB bandwidth was in the range 87-97%, acoustic output power exceeded 1 W, and acoustic pressure exceeded 1 MPa peak-to-peak. 3D stress simulations were performed to predict the isostatic pressure required to induce material failure and 4D acoustic simulations. The pressure simulations indicated that specific design variations could sustain isostatic pressures up to 4.8 MPa.The acoustic simulations were able to

  15. Humeral windows in revision total elbow arthroplasty.

    PubMed

    Peach, Chris A; Salama, Amir; Stanley, David

    2016-04-01

    The use of cortical windows for revision elbow arthroplasty has not previously been widely reported. Their use aids safe revision of a well fixed humeral prosthesis and can be used in the setting of dislocation, periprosthetic fracture or aseptic loosening of the ulnar component. We describe our technique and results of cortical windows in the distal humerus for revision elbow arthroplasty surgery. PMID:27583011

  16. Microfibrillar collagen in the oval window.

    PubMed

    Liston, S L

    1982-01-01

    Compressed microfibrillar collagen was used to seal openings in cat oval windows. Histologic examination showed the material was well tolerated and produced a good oval window seal. Because of its hemostatic properties, this material should prove to be useful when bleeding is encountered during a stapedectomy. PMID:10994440

  17. Thermal measurements of microwave transmitter feedhorn window

    NASA Technical Reports Server (NTRS)

    Perez, R. M.; Hoppe, D. J.

    1989-01-01

    Thermal measurements of microwave transmitter feedhorn windows were performed using an imaging infrared radiometer. The measurement technique is described and results are presented for windows made of 0.001-in. Kapton (trademark of Dupont Chemical Co.) and 0.1-in. HTP-6 (Space Shuttle tile material). Measured and calculated temperatures agree well.

  18. Window Cleaner—New and Improved?

    NASA Astrophysics Data System (ADS)

    Jacobsen, Erica K.

    2007-11-01

    A recent coupon advertisement for window cleaner in the Sunday newspaper was reminiscent of a past JCE Classroom Activity . The new product says it offers a cheaper way to clean your windows and is a way to cut down on the number of plastic spray containers you throw away.

  19. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    SciTech Connect

    Baker, P.

    2012-12-01

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  20. Measured Rattle Threshold of Residential House Windows

    NASA Technical Reports Server (NTRS)

    Sizov, Natalia; Schultz, Troy; Hobbs, Christopher; Klos, Jacob

    2008-01-01

    Window rattle is a common indoor noise effect in houses exposed to low frequency noise from such sources as railroads, blast noise and sonic boom. Human perception of rattle can be negative that is a motivating factor of the current research effort to study sonic boom induced window rattle. A rattle study has been conducted on residential houses containing windows of different construction at a variety of geographic locations within the United States. Windows in these houses were excited by a portable, high-powered loudspeaker and enclosure specifically designed to be mounted on the house exterior to cover an entire window. Window vibration was measured with accelerometers placed on different window components. Reference microphones were also placed inside the house and inside of the loudspeaker box. Swept sine excitation was used to identify the vibration threshold at which the response of the structure becomes non-linear and begins to rattle. Initial results from this study are presented and discussed. Future efforts will continue to explore the rattle occurrence in windows of residential houses exposed to sonic booms.

  1. A redox-flow electrochromic window.

    PubMed

    Jennings, James R; Lim, Wei Yang; Zakeeruddin, Shaik M; Grätzel, Michael; Wang, Qing

    2015-02-01

    A low-cost electrochromic (EC) window based on a redox-flow system that does not require expensive transparent conductive oxide (TCO) substrates is introduced and demonstrated for the first time. An aqueous I3–/I– redox electrolyte is used in place of a TCO to oxidize/reduce a molecular layer of an EC triphenylamine derivative that is anchored to a mesoporous TiO2 scaffold on the inner faces of a double-paned window. The redox electrolyte is electrochemically oxidized/reduced in an external two-compartment cell and circulated through the window cavity using an inexpensive peristaltic pump, resulting in coloration or decoloration of the window due to reaction of the redox solution with the triphenylamine derivative. The absorption characteristics, coloration/decoloration times, and cycling stability of the prototype EC window are evaluated, and prospects for further development are discussed. PMID:25584903

  2. Internally cooled window for endoatmospheric homing

    NASA Astrophysics Data System (ADS)

    Wojciechowski, C. J.; Leary, D. F.; Bouska, D. H.

    1992-05-01

    This paper presents an innovative approach to infrared (IR) sensor window cooling which will result in improved performance as well as miniaturization of the IR sensor window and coolant hardware. The successful development of this concept can lead to IR windows that can be mass produced at very low overall cost, with short production lead times. The concept involves internal cooling of an advanced diamond film/silicon window, a technique whose goal is to enhance the aero-optics performance by avoiding the turbulence and optical distortion induced by external film cooling injection. Preliminary analysis indicates that the proposed IR window concept can meet advanced interceptor mission requirements while providing significant design improvements in terms of reduced coolant subsystem mass and low manufacturing cost.

  3. Internally cooled window for endoatmospheric homing - Update

    NASA Astrophysics Data System (ADS)

    Wojciechowski, C. J.; Ravi, K. V.; Jones, G.

    1993-06-01

    This paper presents an innovative approach to infrared (IR) sensor window cooling which will result in improved performance as well as miniaturization of the IR sensor window and coolant hardware. The successful development of this concept can lead to IR windows that can be mass produced at very low overall cost, with short production lead times. The concept involves internal cooling of an advanced diamond film/silicon window, a technique whose goal is to enhance the aero-optics performance by avoiding the turbulence and optical distortion induced by external film cooling injection. Preliminary analysis indicates that the proposed IR window concept can meet advanced interceptor mission requirements while providing significant design improvements in terms of reduced coolant subsystem mass and low manufacturing cost.

  4. A monolithic thin film electrochromic window

    SciTech Connect

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. . Electro-Optics Technology Center); Wei, G. ); Yu, P.C. )

    1991-01-01

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors' institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  5. A monolithic thin film electrochromic window

    SciTech Connect

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K.; Wei, G.; Yu, P.C.

    1991-12-31

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors` institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  6. THERM 5 / WINDOW 5 NFRC simulation manual

    SciTech Connect

    Mitchell, Robin; Kohler, Christian; Arasteh, Dariush; Carmody, John; Huizenga, Charlie; Curcija, Dragan

    2003-06-01

    This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOW 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.

  7. Double window configuration as a low cost microwave waveguide window for plasma applications

    SciTech Connect

    Baskaran, R.

    1997-12-01

    Waveguide windows are major components of a transmission line used in microwave plasma devices. The function of the waveguide window is to provide vacuum isolation of the source side from the plasma chamber while transmitting microwaves with minimum attenuation. Commonly a single thin dielectric plate is sandwiched between a choke type flange and a flat flange and is used as a waveguide window. To arrive at a better window configuration in terms of the low power reflection coefficient, the voltage standing wave ratio calculation is carried out for different window configurations (single window and double window) and for various window thicknesses. It is found that the power reflection is the minimum in the case of double window configuration. The minimum power reflection is as low as 0.8{percent} for a combination of alumina and a quartz plate each of 1 cm thickness in the double window configuration. Also, it is more advantageous to use radial microwave coupling than axial coupling in order to increase the life time of the microwave waveguide window. {copyright} {ital 1997 American Institute of Physics.}

  8. Efficient Adjustable Reflectivity Smart Window

    SciTech Connect

    D. Morgan Tench

    2005-12-01

    This project addressed the key technical issues for development of an efficient smart window based on reversible electrochemical transfer of silver between a mirror electrode and a localized counter electrode. Effort to provide uniform switching over large areas focused on use of a resistive transparent electrode innerlayer to increase the interelectrode resistance. An effective edge seal was developed in collaboration with adhesive suppliers and an electrochromic device manufacturer. Work to provide a manufacturable counter electrode focused on fabricating a dot matrix electrode without photolithography by electrodeposition of Pt nuclei on inherent active sites on a transparent oxide conductor. An alternative counter electrode based on a conducting polymer and an ionic liquid electrolyte was also investigated. Work in all of these areas was successful. Sputtered large-bandgap oxide innerlayers sandwiched between conductive indium tin oxide (ITO) layers were shown to provide sufficient cross-layer resistance (>300 ohm/cm{sup 2}) without significantly affecting the electrochemical properties of the ITO overlayer. Two edge seal epoxies, one procured from an epoxy manufacturer and one provided by an electrochromic device manufacturer in finished seals, were shown to be effective barriers against oxygen intrusion up to 80 C. The optimum density of nuclei for the dot matrix counter electrode was attained without use of photolithography by electrodeposition from a commercial alkaline platinum plating bath. Silver loss issues for cells with dot matrix electrodes were successfully addressed by purifying the electrolyte and adjusting the cell cycling parameters. More than 30K cycles were demonstrated for a REM cell (30-cm square) with a dot matrix counter electrode. Larger cells (30-cm square) were successfully fabricated but could not be cycled since the nucleation layers (provided by an outside supplier) were defective so that mirror deposits could not be produced.

  9. Window Insulation: How to Sort Through the Options.

    ERIC Educational Resources Information Center

    Miller, Barbara

    This two-part report explores the efforts of businesses and individuals to improve the thermal performance of windows. Part I discusses the basics of what makes a window product insulate or save energy. Topic areas addressed include saving energy lost through windows, key components of window insulation, three basic types of window insulation,…

  10. Focal plane scanner with reciprocating spatial window

    NASA Technical Reports Server (NTRS)

    Mao, Chengye (Inventor)

    2000-01-01

    A focal plane scanner having a front objective lens, a spatial window for selectively passing a portion of the image therethrough, and a CCD array for receiving the passed portion of the image. All embodiments have a common feature whereby the spatial window and CCD array are mounted for simultaneous relative reciprocating movement with respect to the front objective lens, and the spatial window is mounted within the focal plane of the front objective. In a first embodiment, the spatial window is a slit and the CCD array is one-dimensional, and successive rows of the image in the focal plane of the front objective lens are passed to the CCD array by an image relay lens interposed between the slit and the CCD array. In a second embodiment, the spatial window is a slit, the CCD array is two-dimensional, and a prism-grating-prism optical spectrometer is interposed between the slit and the CCD array so as to cause the scanned row to be split into a plurality of spectral separations onto the CCD array. In a third embodiment, the CCD array is two-dimensional and the spatial window is a rectangular linear variable filter (LVF) window, so as to cause the scanned rows impinging on the LVF to be bandpass filtered into spectral components onto the CCD array through an image relay lens interposed between the LVF and the CCD array.

  11. Challenger Center's Window on the Universe Program

    NASA Astrophysics Data System (ADS)

    Bobrowsky, M.; Goldstein, J.; Livengood, T.; Offringa, K.; Richards, S.; Riddle, B.

    2001-05-01

    Each year, Challenger Center's Window on the Universe launches thousands of everyday people---teachers and students, parents---on a fantastic journey through our universe. Recently, for example, we visited Nogales, Arizona, where we trained 350 teachers, talked to 6000 students in classrooms, and 1500 more students and their families as part of ``Family Science Night'' presentations. Window aims to increase community involvement in science education within underserved communities throughout the United States. Challenger Center's national team works with a local team in the participating community to provide training for teachers, classroom talks, and Family Science Night presentations for the community. The national team includes at least one astronomer and one educator from Challenger Center, as well as at least two Visiting Researchers (VRs) from other institutions. (However, in Washington, D.C., there were 40 VRs from 12 different institutions who, along with the national team, visited every 6th grade classroom in the city! Window materials have become an essential part of the 6th grade curriculum in Washington, D.C.) VRs are scientists or engineers in the fields of astronomy, space science, or human space flight who are gifted at communicating their passion about research to audiences of all ages. Their research is related to the topics covered in the Window educational modules, which provide the core content for Window on the Universe programming. VRs travel to Window communities during one of the Window weeks, where they visit classrooms and sometimes conduct Family Science Night presentations. Researchers from any institution are invited to participate as VRs in Window programs and showcase their research and their institution. If you or someone from your institution is interested in participating, please visit http://challenger.org/wotu/ and click on ``Find Out More.'' Window on the Universe is funded by grants from NASA's Human Exploration and Development

  12. Optimal spectral windows for microwave diversity imaging

    NASA Technical Reports Server (NTRS)

    Farhat, Nabil H.; Bai, Baocheng

    1991-01-01

    Tomographic microwave diversity imaging is analyzed using linear system theory concepts, and optimal spectral windows for data acquisition are obtained either by considering window position in the spectral domain or by using simulated annealing to find an optimal phase weighting of the object frequency response samples collected over the specified spectral window. This study provides a means of microwave image formation that is applicable under general assumptions. Results of numerical simulations and representative images reconstructed from realistic experimental microwave scattering data are given, demonstrating that the proposed approach is superior to previous image reconstruction methods.

  13. X-ray windows for spaceborne detectors

    NASA Astrophysics Data System (ADS)

    Viitanen, Veli-Pekka; Nenonen, Seppo; Partanen, Panu; Sipila, Heikki; Mutikainen, Risto

    1992-10-01

    Several types of ultrathin entrance windows have been developed for applications in spaceborne X-ray instruments. Active area diameters up to 140 mm have been achieved. The latest windows developed have a transmission of more than 20 percent at B K-alpha and more than 40 percent at N K-alpha. A new gas block layer type utilizing aluminum nitride has been developed, as well as semitransparent support structures for the membranes. The effects of pressure-induced strain, radiation and atomic oxygen corrosion on the gas leak properties of the windows has been studied.

  14. Implementing Boot Control for Windows Vista

    NASA Astrophysics Data System (ADS)

    Ashino, Yuki; Fujita, Keisuke; Furusawa, Maiko; Uehara, Tetsutaro; Sasaki, Ryoichi

    A digital forensic logging system must prevent the booting of unauthorized programs and the modification of evidence. Our previous research developed Dig-Force2, a boot control system for Windows XP platforms that employs API hooking and a trusted platform module. However, Dig-Force2 cannot be used for Windows Vista systems because the hooked API cannot monitor booting programs in user accounts. This paper describes an enhanced version of Dig-Force2, which uses a TPM and a white list to provide boot control functionality for Windows Vista systems. In addition, the paper presents the results of security and performance evaluations of the boot control system.

  15. Apollo experience report: Spacecraft structural windows

    NASA Technical Reports Server (NTRS)

    Pigg, O. E.; Weiss, S. P.

    1973-01-01

    The window structural design and verification experience is presented for the Apollo command and lunar modules. This report presents window design philosophy, design criteria, hardware description, and qualification and acceptance test programs and discusses the problems encountered and solutions developed in these areas. The structural characteristics of glass are not generally well understood by designers. The optics and instrument glass covers were not considered to be structural components and thus were not normally subjected to the design, qualification, and acceptance standards necessary to preclude failures. These two factors contributed significantly to window problems on both Apollo spacecraft.

  16. DETAIL OF GROUND, MEZZANINE, AND FIRST FLOOW WINDOW OPENINGS AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF GROUND, MEZZANINE, AND FIRST FLOOW WINDOW OPENINGS AT CORNER OF CLAY AND 15TH STREETS. WINDOWS AND WINDOW FRAMES REMOVED - John Breuner & Company Building, 1515 Clay Street, Oakland, Alameda County, CA

  17. DETAIL VIEW, WEST VENETIAN WINDOW IN SOUTH WALL. (NOTE THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, WEST VENETIAN WINDOW IN SOUTH WALL. (NOTE THE IRON BARS ON THE CELLAR WINDOW BELOW. THIS WINDOW LETS ONTO WHAT WAS LIKELY THE ESTATE OFFICE DURING THE HAMILTONIAN RESIDENCY - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  18. Field Evaluation of Low-E Storm Windows

    SciTech Connect

    Drumheller, S. Craig; Kohler, Christian; Minen, Stefanie

    2007-07-11

    A field evaluation comparing the performance of low emittance (low-e) storm windows with both standard clear storm windows and no storm windows was performed in a cold climate. Six homes with single-pane windows were monitored over the period of one heating season. The homes were monitored with no storm windows and with new storm windows. The storm windows installed on four of the six homes included a hard coat, pyrolitic, low-e coating while the storm windows for the other two homeshad traditional clear glass. Overall heating load reduction due to the storm windows was 13percent with the clear glass and 21percent with the low-e windows. Simple paybacks for the addition of the storm windows were 10 years for the clear glass and 4.5 years forthe low-e storm windows.

  19. NREL Electrochromic Window Research Wins Award

    ScienceCinema

    None

    2013-05-29

    Winners of the CO-LABS Governor's Award for High-Impact Research in Energy Efficiency, Dr. Satyen Deb at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) discovered that a small electrical charge can change the opacity of tungsten oxide from clear to tinted. He, Dr. Dane Gillaspie, and their fellow scientists at NREL then applied this knowledge to develop and transfer the technologies required to construct an electrochromic window, which can switch between clear and heavily tinted states. Electrochromic windows allow natural light in while adding tint to reduce summer heat and glare, and going clear to allow sunlight through in the winter. Broad adaptation of these windows could reduce US total energy use by four percent and reduce building cooling loads by 20%, much of this during expensive peak hours. Windows based on these discoveries are now being installed worldwide.

  20. Opening a window on the universe

    NASA Astrophysics Data System (ADS)

    Dutson, Kate

    2015-04-01

    The Cherenkov Telescope Array will revolutionize ground-based gamma-ray astronomy, explains Kate Dutson, extending our electromagnetic window on to the universe to include the highest-energy photons ever detected.

  1. MANAGING LARGE DATABASES WITH CUSTOMIZED SAS WINDOWS

    EPA Science Inventory

    This paper discusses the principles of database management through customized windows using SAS/AF, particularly PROC BUILD, to invoke interactive and batch processing of data entry, editing, updating, automatic report generation, and custom report generation functions, including...

  2. Electrochromic sun control coverings for windows

    SciTech Connect

    Benson, D K; Tracy, C E

    1990-04-01

    The 2 billion square meters (m{sup 2}) of building windows in the United States cause a national energy drain almost as large as the energy supply of the Alaskan oil pipeline. Unlike the pipeline, the drain of energy through windows will continue well into the 21st century. A part of this energy drain is due to unwanted sun gain through windows. This is a problem throughout the country in commercial buildings because they generally require air conditioning even in cold climates. New commercial windows create an additional 1600 MW demand for peak electric power in the United States each year. Sun control films, widely used in new windows and as retrofits to old windows, help to mitigate this problem. However, conventional, static solar control films also block sunlight when it is wanted for warmth and daylighting. New electrochromic, switchable, sun-gain-control films now under development will provide more nearly optimal and automatic sun control for added comfort, decreased building operating expense, and greater energy saving. Switchable, electrochromic films can be deposited on polymers at high speeds by plasma enhanced chemical vapor deposition (PECVD) in a process that may be suitable for roll coating. This paper describes the electrochromic coatings and the PECVD processes, and speculates about their adaptability to high-speed roll coating. 8 refs., 3 figs.

  3. Windowed multipole for cross section Doppler broadening

    NASA Astrophysics Data System (ADS)

    Josey, C.; Ducru, P.; Forget, B.; Smith, K.

    2016-02-01

    This paper presents an in-depth analysis on the accuracy and performance of the windowed multipole Doppler broadening method. The basic theory behind cross section data is described, along with the basic multipole formalism followed by the approximations leading to windowed multipole method and the algorithm used to efficiently evaluate Doppler broadened cross sections. The method is tested by simulating the BEAVRS benchmark with a windowed multipole library composed of 70 nuclides. Accuracy of the method is demonstrated on a single assembly case where total neutron production rates and 238U capture rates compare within 0.1% to ACE format files at the same temperature. With regards to performance, clock cycle counts and cache misses were measured for single temperature ACE table lookup and for windowed multipole. The windowed multipole method was found to require 39.6% more clock cycles to evaluate, translating to a 7.9% performance loss overall. However, the algorithm has significantly better last-level cache performance, with 3 fewer misses per evaluation, or a 65% reduction in last-level misses. This is due to the small memory footprint of the windowed multipole method and better memory access pattern of the algorithm.

  4. Noise Transmission Characteristics of Damped Plexiglas Windows

    NASA Technical Reports Server (NTRS)

    Gibbs, Gary P.; Buehrle, Ralph D.; Klos, Jacob; Brown, Sherilyn A.

    2002-01-01

    Most general aviation aircraft utilize single layer plexiglas material for the windshield and side windows. Adding noise control treatments to transparent panels is a challenging problem. In this paper, damped plexiglas windows are evaluated for replacement of conventional windows in general aviation aircraft to reduce the structure-borne and airborne noise transmitted into the interior. In contrast to conventional solid windows, the damped plexiglas window panels are fabricated using two or three layers of plexiglas with transparent viscoelastic damping material sandwiched between the layers. Results from acoustic tests conducted in the NASA Langley Structural Acoustic Loads and Transmission (SALT) facility are used to compare different designs of the damped plexiglas panels with solid windows of the same nominal thickness. Comparisons of the solid and damped plexiglas panels show reductions in the radiated sound power of up to 8 dB at low frequency resonances and as large as 4.5 dB over a 4000 Hz bandwidth. The weight of the viscoelastic treatment was approximately 1% of the panel mass. Preliminary FEM/BEM modeling shows good agreement with experimental results for radiated sound power.

  5. Window size impact in human activity recognition.

    PubMed

    Banos, Oresti; Galvez, Juan-Manuel; Damas, Miguel; Pomares, Hector; Rojas, Ignacio

    2014-01-01

    Signal segmentation is a crucial stage in the activity recognition process; however, this has been rarely and vaguely characterized so far. Windowing approaches are normally used for segmentation, but no clear consensus exists on which window size should be preferably employed. In fact, most designs normally rely on figures used in previous works, but with no strict studies that support them. Intuitively, decreasing the window size allows for a faster activity detection, as well as reduced resources and energy needs. On the contrary, large data windows are normally considered for the recognition of complex activities. In this work, we present an extensive study to fairly characterize the windowing procedure, to determine its impact within the activity recognition process and to help clarify some of the habitual assumptions made during the recognition system design. To that end, some of the most widely used activity recognition procedures are evaluated for a wide range of window sizes and activities. From the evaluation, the interval 1-2 s proves to provide the best trade-off between recognition speed and accuracy. The study, specifically intended for on-body activity recognition systems, further provides designers with a set of guidelines devised to facilitate the system definition and configuration according to the particular application requirements and target activities. PMID:24721766

  6. Highly transparent light-harvesting window film.

    PubMed

    Cocilovo, Byron; Hashimura, Aki; Tweet, Douglas J; Voutsas, Tolis; Norwood, Robert A

    2015-10-20

    We have simulated unique textured window films that capture solar radiation without compromising the window's transparency by scattering infrared light toward photovoltaic strips located at the edges of the window. These films are ideal for powering electrochromic glass, which is difficult to install as each window requires its own power source. Our most promising design consists of an embedded array of 35° cones coated with a five-layer SiO2-Ag stack that was simulated to direct 1.4% of the incident light toward the edges and generate 1 W of power under a collimated 1000  W/m2 AM1.5G source at 60° and an average of 0.5 W over a full year when applied to a 1  m×1  m window. The internal visible transmittance of the window with the applied film is 95% at normal incidence, and remains above 85% for viewing angles up to 60°. The haze is 0.6% at normal incidence and 3.9% at 60°. PMID:26560389

  7. Window Size Impact in Human Activity Recognition

    PubMed Central

    Banos, Oresti; Galvez, Juan-Manuel; Damas, Miguel; Pomares, Hector; Rojas, Ignacio

    2014-01-01

    Signal segmentation is a crucial stage in the activity recognition process; however, this has been rarely and vaguely characterized so far. Windowing approaches are normally used for segmentation, but no clear consensus exists on which window size should be preferably employed. In fact, most designs normally rely on figures used in previous works, but with no strict studies that support them. Intuitively, decreasing the window size allows for a faster activity detection, as well as reduced resources and energy needs. On the contrary, large data windows are normally considered for the recognition of complex activities. In this work, we present an extensive study to fairly characterize the windowing procedure, to determine its impact within the activity recognition process and to help clarify some of the habitual assumptions made during the recognition system design. To that end, some of the most widely used activity recognition procedures are evaluated for a wide range of window sizes and activities. From the evaluation, the interval 1–2 s proves to provide the best trade-off between recognition speed and accuracy. The study, specifically intended for on-body activity recognition systems, further provides designers with a set of guidelines devised to facilitate the system definition and configuration according to the particular application requirements and target activities. PMID:24721766

  8. Dust adhesion on Viking lander camera window

    NASA Technical Reports Server (NTRS)

    Singh, J. J.

    1978-01-01

    Studies of dust impingement on a duplicate Viking Lander camera window indicated the possibility of window obscuration after several days of exposure even at low dust concentration levels. As a result the following corrective measures were recommended: (1) The clearance between the housing surface and the camera post should be eliminated by using an appropriately designed plastic skirt: (2) The three horizontal ledges below the window inside the cavity act as bases for pile-up of dust that slides down the window surface; they should be replaced by a single inclined plane down which the dust will slide and fall out on the ground: (3) Adhered dust on the window surface can be removed by high pressure CO2 jets directed down against the window; the amount of CO2 gas needed for the entire mission can be carried in a 3 1/2-inch diameter sphere equipped with a remotely programable valve. These measures were incorporated in the design of the lander camera system. The continued high quality of photographs transmitted from the Viking spacecraft several months after landing attests to their effectiveness.

  9. Transforming the market for residential windows: design considerations for DOE's Efficient Window Collaborative

    SciTech Connect

    Eto, J.; Arasteh, D.; Selkowitz, S.

    1998-08-01

    Market adoption of recent, commercially available technological advances that improve the energy performance of windows will lead to immediate economic and energy savings benefits to the nation. This paper is a scoping study intended to inform the design of a major DOE initiative to accelerate market adoption of these windows in the residential sector. We describe the structure of the US residential window market and the interests of the various market players. We then briefly review five recent market transformation initiatives. Finally, we summarize our findings in a list of considerations we believe will be important for the DOE's initiative to transform the US residential window market.

  10. Window contamination on Expose-R

    NASA Astrophysics Data System (ADS)

    Demets, R.; Bertrand, M.; Bolkhovitinov, A.; Bryson, K.; Colas, C.; Cottin, H.; Dettmann, J.; Ehrenfreund, P.; Elsaesser, A.; Jaramillo, E.; Lebert, M.; van Papendrecht, G.; Pereira, C.; Rohr, T.; Saiagh, K.

    2015-01-01

    Expose is a multi-user instrument for astrobiological and astrochemical experiments in space. Installed at the outer surface of the International Space Station, it enables investigators to study the impact of the open space environment on biological and biochemical test samples. Two Expose missions have been completed so far, designated as Expose-E (Rabbow et al. 2012) and Expose-R (Rabbow et al. this issue). One of the space-unique environmental factors offered by Expose is full-spectrum, ultraviolet (UV)-rich electromagnetic radiation from the Sun. This paper describes and analyses how on Expose-R, access of the test samples to Solar radiation degraded during space exposure in an unpredicted way. Several windows in front of the Sun-exposed test samples acquired a brown shade, resulting in a reduced transparency in visible light, UV and vacuum UV (VUV). Post-flight investigations revealed the discolouration to be caused by a homogenous film of cross-linked organic polymers at the inside of the windows. The chemical signature varied per sample carrier. No such films were found on windows from sealed, pressurized compartments, or on windows that had been kept out of the Sun. This suggests that volatile compounds originating from the interior of the Expose facility were cross-linked and photo-fixed by Solar irradiation at the rear side of the windows. The origin of the volatiles was not fully identified; most probably there was a variety of sources involved including the biological test samples, adhesives, plastics and printed circuit boards. The outer surface of the windows (pointing into space) was chemically impacted as well, with a probable effect on the transparency in VUV. The reported analysis of the window contamination on Expose-R is expected to help the interpretation of the scientific results and offers possibilities to mitigate this problem on future missions - in particular Expose-R2, the direct successor of Expose-R.

  11. Microelectronic device package with an integral window

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2002-01-01

    An apparatus for packaging of microelectronic devices, including an integral window. The microelectronic device can be a semiconductor chip, a CCD chip, a CMOS chip, a VCSEL chip, a laser diode, a MEMS device, or a IMEMS device. The package can include a cofired ceramic frame or body. The package can have an internal stepped structure made of one or more plates, with apertures, which are patterned with metallized conductive circuit traces. The microelectronic device can be flip-chip bonded on the plate to these traces, and oriented so that the light-sensitive side is optically accessible through the window. A cover lid can be attached to the opposite side of the package. The result is a compact, low-profile package, having an integral window that can be hermetically-sealed. The package body can be formed by low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC) multilayer processes with the window being simultaneously joined (e.g. cofired) to the package body during LTCC or HTCC processing. Multiple chips can be located within a single package. The cover lid can include a window. The apparatus is particularly suited for packaging of MEMS devices, since the number of handling steps is greatly reduced, thereby reducing the potential for contamination.

  12. Hot Cell Window Shielding Analysis Using MCNP

    SciTech Connect

    Chad L. Pope; Wade W. Scates; J. Todd Taylor

    2009-05-01

    The Idaho National Laboratory Materials and Fuels Complex nuclear facilities are undergoing a documented safety analysis upgrade. In conjunction with the upgrade effort, shielding analysis of the Fuel Conditioning Facility (FCF) hot cell windows has been conducted. This paper describes the shielding analysis methodology. Each 4-ft thick window uses nine glass slabs, an oil film between the slabs, numerous steel plates, and packed lead wool. Operations in the hot cell center on used nuclear fuel (UNF) processing. Prior to the shielding analysis, shield testing with a gamma ray source was conducted, and the windows were found to be very effective gamma shields. Despite these results, because the glass contained significant amounts of lead and little neutron absorbing material, some doubt lingered regarding the effectiveness of the windows in neutron shielding situations, such as during an accidental criticality. MCNP was selected as an analysis tool because it could model complicated geometry, and it could track gamma and neutron radiation. A bounding criticality source was developed based on the composition of the UNF. Additionally, a bounding gamma source was developed based on the fission product content of the UNF. Modeling the windows required field inspections and detailed examination of drawings and material specifications. Consistent with the shield testing results, MCNP results demonstrated that the shielding was very effective with respect to gamma radiation, and in addition, the analysis demonstrated that the shielding was also very effective during an accidental criticality.

  13. "Broken windows" and the risk of gonorrhea.

    PubMed Central

    Cohen, D; Spear, S; Scribner, R; Kissinger, P; Mason, K; Wildgen, J

    2000-01-01

    OBJECTIVES: We examined the relationships between neighborhood conditions and gonorrhea. METHODS: We assessed 55 block groups by rating housing and street conditions. We mapped all cases of gonorrhea between 1994 and 1996 and calculated aggregated case rates by block group. We obtained public school inspection reports and assigned findings to the block groups served by the neighborhood schools. A "broken windows" index measured housing quality, abandoned cars, graffiti, trash, and public school deterioration. Using data from the 1990 census and 1995 updates, we determined the association between "broken windows," demographic characteristics, and gonorrhea rates. RESULTS: The broken windows index explained more of the variance in gonorrhea rates than did a poverty index measuring income, unemployment, and low education. In high-poverty neighborhoods, block groups with high broken windows scores had significantly higher gonorrhea rates than block groups with low broken windows scores (46.6 per 1000 vs 25.8 per 1000; P < .001). CONCLUSIONS: The robust association of deteriorated physical conditions of local neighborhoods with gonorrhea rates, independent of poverty, merits an intervention trial to test whether the environment has a causal role in influencing high-risk sexual behaviors. PMID:10667184

  14. Rugged sensor window materials for harsh environments

    NASA Astrophysics Data System (ADS)

    Bayya, Shyam; Villalobos, Guillermo; Kim, Woohong; Sanghera, Jasbinger; Hunt, Michael; Aggarwal, Ishwar D.

    2014-09-01

    There are several military or commercial systems operating in very harsh environments that require rugged windows. On some of these systems, windows become the single point of failure. These applications include sensor or imaging systems, high-energy laser weapons systems, submarine photonic masts, IR countermeasures and missiles. Based on the sea or land or air based platforms the window or dome on these systems must withstand wave slap, underwater or ground based explosions, or survive flight through heavy rain and sand storms while maintaining good optical transmission in the desired wavelength range. Some of these applications still use softer ZnS or fused silica windows because of lack of availability of rugged materials in shapes or sizes required. Sapphire, ALON and spinel are very rugged materials with significantly higher strengths compared to ZnS and fused silica. There have been recent developments in spinel, ALON and sapphire materials to fabricate in large sizes and conformal shapes. We have been developing spinel ceramics for several of these applications. We are also developing β-SiC as a transparent window material as it has higher hardness, strength, and toughness than sapphire, ALON and spinel. This paper gives a summary of our recent findings.

  15. X-Windows Socket Widget Class

    NASA Technical Reports Server (NTRS)

    Barry, Matthew R.

    2006-01-01

    The X-Windows Socket Widget Class ("Class" is used here in the object-oriented-programming sense of the word) was devised to simplify the task of implementing network connections for graphical-user-interface (GUI) computer programs. UNIX Transmission Control Protocol/Internet Protocol (TCP/IP) socket programming libraries require many method calls to configure, operate, and destroy sockets. Most X Windows GUI programs use widget sets or toolkits to facilitate management of complex objects. The widget standards facilitate construction of toolkits and application programs. The X-Windows Socket Widget Class encapsulates UNIX TCP/IP socket-management tasks within the framework of an X Windows widget. Using the widget framework, X Windows GUI programs can treat one or more network socket instances in the same manner as that of other graphical widgets, making it easier to program sockets. Wrapping ISP socket programming libraries inside a widget framework enables a programmer to treat a network interface as though it were a GUI.

  16. Damped Windows for Aircraft Interior Noise Control

    NASA Technical Reports Server (NTRS)

    Buehrle, Ralph D.; Klos, Jacob; Gibbs, Gary P.

    2004-01-01

    Windows are a significant path for structure-borne and air-borne noise transmission into aircraft. To improve the acoustical performance, damped windows were fabricated using two or three layers of plexiglas with transparent viscoelastic damping material sandwiched between the layers. In this paper, numerical and experimental results are used to evaluate the acoustic benefits of damped windows. Tests were performed in the Structural Acoustic Loads and Transmission Facility at NASA Langley Research Center to measure the transmission loss for diffuse acoustic excitation and radiated sound power for point force excitation. Comparisons between uniform and damped plexiglas windows showed increased transmission loss of 6 dB at the first natural frequency, 6 dB at coincidence, and 4.5 dB over a 50 to 4k Hz range. Radiated sound power was reduced up to 7 dB at the lower natural frequencies and 3.7 dB over a 1000 Hz bandwidth. Numerical models are presented for the prediction of radiated sound power for point force excitation and transmission loss for diffuse acoustic excitation. Radiated sound power and transmission loss predictions are in good agreement with experimental data. A parametric study is presented that evaluates the optimum configuration of the damped plexiglas windows for reducing the radiated sound power.

  17. Window type: 4x4 multipaned steel window flanked by 1x4 multipaned ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: 4x4 multipaned steel window flanked by 1x4 multipaned steel, casements. Concrete stoop, entry overhang and pipe rail detail also illustrated. Building 36, facing northwest - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  18. Window type: paired 2x4 multipaned steel windows flanked by 1x4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: paired 2x4 multipaned steel windows flanked by 1x4 multipaned steel casements, breaking building corner. Raised panel door front entry also illustrated. Ground floor detail Building 19, facing north - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  19. Window type: paired 3x2 multipaned steel window flanked by 1x3 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: paired 3x2 multipaned steel window flanked by 1x3 multipaned steel casements, breaking building corner. Broad overhanging eave also illustrated. Second story detail. Building 13, facing east - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  20. The Moving Window Technique: A Window into Developmental Changes in Attention during Facial Emotion Recognition

    ERIC Educational Resources Information Center

    Birmingham, Elina; Meixner, Tamara; Iarocci, Grace; Kanan, Christopher; Smilek, Daniel; Tanaka, James W.

    2013-01-01

    The strategies children employ to selectively attend to different parts of the face may reflect important developmental changes in facial emotion recognition. Using the Moving Window Technique (MWT), children aged 5-12 years and adults ("N" = 129) explored faces with a mouse-controlled window in an emotion recognition task. An…

  1. 30 CFR 18.30 - Windows and lenses.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Windows and lenses. 18.30 Section 18.30 Mineral... § 18.30 Windows and lenses. (a) MSHA may waive testing of materials for windows or lenses except headlight lenses. When tested, material for windows or lenses shall meet the test requirements prescribed...

  2. 30 CFR 18.30 - Windows and lenses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Windows and lenses. 18.30 Section 18.30 Mineral... § 18.30 Windows and lenses. (a) MSHA may waive testing of materials for windows or lenses except headlight lenses. When tested, material for windows or lenses shall meet the test requirements prescribed...

  3. 30 CFR 18.30 - Windows and lenses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Windows and lenses. 18.30 Section 18.30 Mineral... § 18.30 Windows and lenses. (a) MSHA may waive testing of materials for windows or lenses except headlight lenses. When tested, material for windows or lenses shall meet the test requirements prescribed...

  4. 30 CFR 18.30 - Windows and lenses.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Windows and lenses. 18.30 Section 18.30 Mineral... § 18.30 Windows and lenses. (a) MSHA may waive testing of materials for windows or lenses except headlight lenses. When tested, material for windows or lenses shall meet the test requirements prescribed...

  5. 30 CFR 18.30 - Windows and lenses.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Windows and lenses. 18.30 Section 18.30 Mineral... § 18.30 Windows and lenses. (a) MSHA may waive testing of materials for windows or lenses except headlight lenses. When tested, material for windows or lenses shall meet the test requirements prescribed...

  6. Combined Pressure and Thermal Window System for Space Vehicles

    NASA Technical Reports Server (NTRS)

    Svartstrom, Kirk Nils (Inventor)

    2015-01-01

    A window system for a vehicle comprising a pressure and thermal window pane, a seal system, and a retainer system. The pressure and thermal window pane may be configured to provide desired pressure protection and desired thermal protection when exposed to an environment around the vehicle during operation of the vehicle. The pressure and thermal window pane may have a desired ductility. The seal system may be configured to contact the pressure and thermal window pane to seal the pressure and thermal window pane. The retainer system may be configured to hold the seal system and the pressure and thermal window pane.

  7. A simple hazemeter for window pollution assessment

    NASA Astrophysics Data System (ADS)

    Toy, M.; White, M. R.

    1980-03-01

    Window dirtiness is an obvious result of air pollution. The hazemeter described is a cheap and proven device for assessing two optical factors related to this. The value of measuring direct transmission loss is immediately apparent. The value of the haze or scattered light factor is not so obvious. It affects the total light passed through the window and was shown to have correlations with some of the psychological tests of which a brief mention has been made. The potential of this instrument can be extended to the design of more sophisticated analyses of the effect of pollution on windows; for example, the correlation of optical factors with deposit gauge and rain gauge readings, spectral distributions (say at twilight) and the effect on drivers of dirty windscreens.

  8. Apparatus for insulating windows and the like

    DOEpatents

    Mitchell, R.A.

    1984-06-19

    Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in kit'' form. 11 figs.

  9. Apparatus for insulating windows and the like

    DOEpatents

    Mitchell, Robert A.

    1984-01-01

    Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in "kit" form.

  10. Radcalc for Windows. Volume 2: Technical manual

    SciTech Connect

    Green, J.R.

    1995-09-27

    Radcalc for Windows is a user-friendly menu-driven Windows-compatible software program with applications in the transportation of radioactive materials. It calculates the radiolytic generation of hydrogen gas in the matrix of low-level and high-level radioactive waste using NRC-accepted methodology. It computes the quantity of a radionuclide and its associated products for a given period of time. In addition, the code categorizes shipment quantities as radioactive, Type A or Type B, limited quantity, low specific activity, highway route controlled, and fissile excepted using DOT definitions and methodologies, as outlined in 49 CFR Subchapter C. The code has undergone extensive testing and validation. Volume I is a User`s Guide, and Volume II is the Technical Manual for Radcalc for Windows

  11. High-Temperature Optical Window Design

    NASA Technical Reports Server (NTRS)

    Roeloffs, Norman; Taranto, Nick

    1995-01-01

    A high-temperature optical window is essential to the optical diagnostics of high-temperature combustion rigs. Laser Doppler velocimetry, schlieren photography, light sheet visualization, and laser-induced fluorescence spectroscopy are a few of the tests that require optically clear access to the combustor flow stream. A design was developed for a high-temperature window that could withstand the severe environment of the NASA Lewis 3200 F Lean Premixed Prevaporized (LPP) Flame Tube Test Rig. The development of this design was both time consuming and costly. This report documents the design process and the lessons learned, in an effort to reduce the cost of developing future designs for high-temperature optical windows.

  12. Fused silica windows for solar receiver applications

    NASA Astrophysics Data System (ADS)

    Hertel, Johannes; Uhlig, Ralf; Söhn, Matthias; Schenk, Christian; Helsch, Gundula; Bornhöft, Hansjörg

    2016-05-01

    A comprehensive study of optical and mechanical properties of quartz glass (fused silica) with regard to application in high temperature solar receivers is presented. The dependence of rupture strength on different surface conditions as well as high temperature is analyzed, focussing particularly on damage by devitrification and sandblasting. The influence of typical types of contamination in combination with thermal cycling on the optical properties of fused silica is determined. Cleaning methods are compared regarding effectiveness on contamination-induced degradation for samples with and without antireflective coating. The FEM-aided design of different types of receiver windows and their support structure is presented. A large-scale production process has been developed for producing fused silica dome shaped windows (pressurized window) up to a diameter of 816 mm. Prototypes were successfully pressure-tested in a test bench and certified according to the European Pressure Vessel Directive.

  13. Integral window hermetic fiber optic components

    SciTech Connect

    Dalton, R.D.; Kramer, D.P.; Massey, R.T.; Waker, D.A.

    1994-12-31

    In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam.

  14. Integration Window Position Estimation in TR Receivers

    SciTech Connect

    Nekoogar, F; Dowla, F; Spiridon, A

    2005-03-15

    Transmitted-reference (TR) receivers avoid the stringent synchronization requirements that exist in conventional pulse detection schemes. However, the performance of such receivers is highly sensitive to precise timing acquisition and tracking as well as the length of their integration window. This window in TR receivers defines the limits of the finite integrator prior to the final decision making block. In this paper, we propose a novel technique that allows us to extract the timing information of the integration window very accurately in UWB-TR receivers in the presence of channel noise. The principles of the method are presented and the BER performance of a modified UWB-TR receiver is investigated by computer simulation. Our studies show that the proposed estimation technique adds value to the conventional TR receiver structure with modest increase in complexity.

  15. Single-agent parallel window search

    NASA Technical Reports Server (NTRS)

    Powley, Curt; Korf, Richard E.

    1991-01-01

    Parallel window search is applied to single-agent problems by having different processes simultaneously perform iterations of Iterative-Deepening-A(asterisk) (IDA-asterisk) on the same problem but with different cost thresholds. This approach is limited by the time to perform the goal iteration. To overcome this disadvantage, the authors consider node ordering. They discuss how global node ordering by minimum h among nodes with equal f = g + h values can reduce the time complexity of serial IDA-asterisk by reducing the time to perform the iterations prior to the goal iteration. Finally, the two ideas of parallel window search and node ordering are combined to eliminate the weaknesses of each approach while retaining the strengths. The resulting approach, called simply parallel window search, can be used to find a near-optimal solution quickly, improve the solution until it is optimal, and then finally guarantee optimality, depending on the amount of time available.

  16. Solar optical materials for innovative window design

    SciTech Connect

    Lampert, C.M.

    1982-08-01

    New and innovative optical materials and coatings can greatly improve the efficiency of window energy systems. These potential materials and coatings increase energy efficiency by reducing radiative losses in the infrared, or reducing visible reflection losses or controlling overheating due to solar gain. Current progress in heat mirror coatings for glass and polymeric substrates is presented. Highly doped semiconducting oxides and metal/dielectric interference coatings are reviewed. Physical and optical properties are outlined for antireflection films and transparent aerogel insulation media. The potential for optical switching films as window elements includes discussions of electrochromic, photochromic and other physical switching processes.

  17. Error-Based Design Space Windowing

    NASA Technical Reports Server (NTRS)

    Papila, Melih; Papila, Nilay U.; Shyy, Wei; Haftka, Raphael T.; Fitz-Coy, Norman

    2002-01-01

    Windowing of design space is considered in order to reduce the bias errors due to low-order polynomial response surfaces (RS). Standard design space windowing (DSW) uses a region of interest by setting a requirement on response level and checks it by a global RS predictions over the design space. This approach, however, is vulnerable since RS modeling errors may lead to the wrong region to zoom on. The approach is modified by introducing an eigenvalue error measure based on point-to-point mean squared error criterion. Two examples are presented to demonstrate the benefit of the error-based DSW.

  18. Window for radiation detectors and the like

    DOEpatents

    Sparks, C.J. Jr.; Ogle, J.C.

    1975-10-28

    An improved x- and gamma-radiation and particle transparent window for the environment-controlling enclosure of various types of radiation and particle detectors is provided by a special graphite foil of a thickness of from about 0.1 to 1 mil. The graphite must have very parallel hexagonal planes with a mosaic spread no greater than 5$sup 0$ to have the necessary strength in thin sections to support one atmosphere or more of pressure. Such graphite is formed by hot- pressing and annealing pyrolytically deposited graphite and thereafter stripping off layers of sufficient thickness to form the window.

  19. Interior and Exterior Low-E Storm Window Installation

    SciTech Connect

    Witters, Sarah

    2014-09-03

    Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings. A new and improved low-e storm window boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement. A recent whole-home experiment performed by PNNL suggests that attaching low-e storm windows can result in as much energy savings replacing the windows.

  20. Aberration and boresight error correction for conformal aircraft windows using the inner window surface and tilted fixed correctors.

    PubMed

    Zhao, Chunzhu; Cui, Qingfeng; Mao, Shan

    2016-04-01

    A static solution to aberrations and boresight error for tilted conformal aircraft windows at different look angles is reported. The solution uses the inner window surface to correct the window aberrations at a 0° look angle and uses fixed correctors behind the window to correct the residual window aberrations at other look angles. Then, the boresight error for the window at different look angles is corrected by tilting the fixed correctors. The principle of the solution is discussed, and a design example shows that the solution is effective in correcting the aberrations and boresight error for a tilted conformal aircraft window at different look angles. PMID:27139665

  1. Improved Performance of Energy Window Ratio Criteria Obtained Using Multiple Windows at Radiation Portal Monitoring Sites

    SciTech Connect

    Weier, Dennis R.; Lopresti, Charles A.; Ely, James H.; Bates, Derrick J.; Kouzes, Richard T.

    2006-06-07

    Radiation portal monitors are being used to detect radioactive target materials in vehicles transporting cargo. As vehicles pass through the portal monitors, they generate count profiles over time that can be compared to the average panel background counts obtained just prior to the time the vehicle entered the area of the monitors. Pacific Northwest National Laboratory, in support of U.S. Customs and Border Protection (CBP) and U.S. Domestic Nuclear Detection Office (DNDO) under the U.S. Department of Homeland Security (DHS), has accumulated considerable data regarding such background radiation and vehicle profiles from portal installations. Energy window criteria have been shown to increase sensitivity to certain types of target radioactive sources while also controlling to a manageable level the rate of false or nuisance alarms. First generation equipment had only two-window capability, and while energy windowing for such systems was shown to be useful for detecting certain types of sources, it was subsequently found that improved performance could be obtained with more windows. Second generation equipment instead has more windows and can thus support additional energy window criteria which can be shown to be sensitive to a wider set of target sources. Detection likelihoods are generated for various sources and energy window criteria, as well as for gross count decision criteria, based on computer simulated injections of sources into archived vehicle profiles. (PIET-43741-TM-534)

  2. Inexpensive anti-fog coating for windows

    NASA Technical Reports Server (NTRS)

    Carmin, D. L., Jr.; Morrison, H. D.

    1971-01-01

    Coating applications include anti-fog protection for deep-sea diving equipment, fire protection helmets, and windows of vehicles used in hazardous environments. Basic coating composition includes liquid detergent, deionized water, and oxygen compatible fire-resistant oil. Composition prevents visor fogging under maximum metabolic load for 5 hours and longer.

  3. A simple image display application for windows.

    PubMed

    Conrad, G R

    1997-08-01

    The purpose of this project was to develop a simple application for displaying low-to-moderate resolution digital images under the Windows operating environment. The display of scintigraphic images was of special interest, and for this reason the program was designed to show sequences of images and to account for broad ranges of pixel values. In order to function under a variety of Windows versions, the program was developed using the 16-bit Microsoft C +2 compiler and targeted for Windows 3.1 enhanced. It was tested with Trionix images for nuclear medicine and Siemens for computed tomography (CT) and magnetic resonance (MR). The resulting application, called SID, successfully read Magnetom, Somatom, Trionix, and Interfile images of dimension 512 or less on Intel-based Windows PCs with 256 color SVGA-compatible (Super Video Graphics Adapters) video hardware. Early applications of the program included remote monitoring of image studies, resident review of teaching cases, review of research images, and preparation of educational materials. This article describes the features, operation, and potential applications of SID. PMID:9268906

  4. Polycrystal GaAs infrared windows

    NASA Astrophysics Data System (ADS)

    Wada, Hideo; Shibata, Ken-ichiro; Yamashita, Masashi; Nakayama, Shigeru; Fujii, Akihito

    2001-09-01

    There are difficult points such as lowering of the detection or recognition capability of some targets by aerodynamic heating with speedup of the aircraft and missile and restriction of the operation by the raindrop in rainfall time on the conventional ZnS infrared window application used for missile seeker and FLIR equipment. Therefore, in this study, the promising polycrystal GaAs which has low infrared radiations in high temperature was produced using HB method (Horizontal Boat method) and VG method (Vertical Boat method) as a new infrared window material expected the durability for rain erosion. As the result, 70mm2 windows by the HB method and 100mm diameter windows by VB method were realized. Moreover, their optical characteristics, mechanical properties and thermal shock durabilities were measured and they were confirmed to be about 56% in average transmittance in the wavelength of 10micrometers bands, 530~630kg/mm2 in their hardness and thermostable at 300 degree(s)C.

  5. Considerations When Upgrading and Renovating Window Systems

    ERIC Educational Resources Information Center

    Gille, Steve

    2010-01-01

    Today's educational facilities managers face many challenges. As stewards of their campus' physical assets, these professionals are charged with improving students' learning environments, saving money, and maintaining the historical and aesthetic integrity of their buildings. For schools and universities that have not replaced their windows in…

  6. Sliding, Insulating Window Panel Reduces Heat Loss.

    ERIC Educational Resources Information Center

    School Business Affairs, 1984

    1984-01-01

    A new sliding insulated panel reduces window heat loss up to 86 percent, and infiltration 60-90 percent, paying for itself in 3-9 years. This article discusses the panel's use and testing in the upper Midwest, reporting both technical characteristics and users' reactions. (MCG)

  7. Windows 8: What Educators Need to Know

    ERIC Educational Resources Information Center

    Vedder, Richard G.

    2012-01-01

    In October 2012, Microsoft will release the commercial version of its next operating system, presently called "Windows 8." This version represents a significant departure from the past. Microsoft wants this operating system to meet user needs regardless of physical platform (e.g., desktop, notebook, tablet, mobile phone). As part of this mission,…

  8. Schools Facing the Expiration of Windows XP

    ERIC Educational Resources Information Center

    Cavanagh, Sean

    2013-01-01

    Microsoft's plans to end support for Windows XP, believed to be the dominant computer operating system in K-12 education, could pose big technological and financial challenges for districts nationwide--issues that many school systems have yet to confront. The giant software company has made it clear for years that it plans to stop supporting XP…

  9. An acoustic window for sustainable buildings

    NASA Astrophysics Data System (ADS)

    Kang, Jian; Brocklesby, Martin; Li, Zhemin; Oldham, David J.

    2005-04-01

    Encouraging the use of natural ventilation is an important tendency in the green building movement, but opening windows can often cause noise problems. This research develops a window system which allows natural ventilation while reducing noise transmission. The core idea is to create a ventilation path by staggering two layers of glass and using micro-perforated absorbers (MPA) along the path created to reduce noise. The MPA are made from transparent materials so that daylighting is relatively unaffected. Starting with a brief introduction of the MPA theory and its application in ducts, the paper presents a series of numerical simulations using finite element method based software FEMLAB, and experiment results measured between a semi-anechoic chamber and a reverberation chamber. Performance in acoustics, ventilation and daylighting are all taken into account. A basic window configuration is first considered, studying the effectiveness of various window parameters. A number of strategic designs are then examined, including external hoods and louvers in the sound path. There is generally a good agreement between simulation and measurement, and the noise reduction can be as good as a single glazing, with air movement to achieve occupant comfort, rather than just for minimum air exchange. [Work supported by EPSRC.

  10. New Window into the Human Body

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Michael Vannier, MD, a former NASA engineer, recognized the similarity between NASA's computerized image processing technology and nuclear magnetic resonance. With technical assistance from Kennedy Space Center, he developed a computer program for Mallinckrodt Institute of Radiology enabling Nuclear Magnetic Resonance (NMR) to scan body tissue for earlier diagnoses. Dr. Vannier feels that "satellite imaging" has opened a new window into the human body.

  11. Sphere-cone-polynomial special window with good aberration characteristic

    NASA Astrophysics Data System (ADS)

    Wang, Chao; Zhang, Xin; Qu, He-Meng; Wang, Ling-Jie; Wang, Yu

    2013-07-01

    Optical windows with external surfaces shaped to satisfy operational environment needs are known as special windows. A novel special window, a sphere-cone-polynomial (SCP) window, is proposed. The formulas of this window shape are given. An SCP MgF2 window with a fineness ratio of 1.33 is designed as an example. The field-of-regard (FOR) angle is ±75°. From the window system simulation results obtained with the calculated fluid dynamics (CFD) and optical design software, we find that compared to the conventional window forms, the SCP shape can not only introduce relatively less drag in the airflow, but also have the minimal effect on imaging. So the SCP window optical system can achieve a high image quality across a super wide FOR without adding extra aberration correctors. The tolerance analysis results show that the optical performance can be maintained with a reasonable fabricating tolerance to manufacturing errors.

  12. Convex optimization-based windowed Fourier filtering with multiple windows for wrapped-phase denoising.

    PubMed

    Yatabe, Kohei; Oikawa, Yasuhiro

    2016-06-10

    The windowed Fourier filtering (WFF), defined as a thresholding operation in the windowed Fourier transform (WFT) domain, is a successful method for denoising a phase map and analyzing a fringe pattern. However, it has some shortcomings, such as extremely high redundancy, which results in high computational cost, and difficulty in selecting an appropriate window size. In this paper, an extension of WFF for denoising a wrapped-phase map is proposed. It is formulated as a convex optimization problem using Gabor frames instead of WFT. Two Gabor frames with differently sized windows are used simultaneously so that the above-mentioned issues are resolved. In addition, a differential operator is combined with a Gabor frame in order to preserve discontinuity of the underlying phase map better. Some numerical experiments demonstrate that the proposed method is able to reconstruct a wrapped-phase map, even for a severely contaminated situation. PMID:27409020

  13. Photodetachment neutralizer development: Laser window design study: Volume 2, Window design details: Final report

    SciTech Connect

    Not Available

    1987-01-01

    During 1983, TRW conducted a photodetachment neutralizer development (PDN) - Laser Resonator study. The emphasis of this contract was to assess a technology base of the PDN concept. Three technology assessments were conducted: Mirror Technology assessments, Window Engineering Analysis/Technology assessment, and COIL medium modeling with emphasis on PDN issues. Based on the results of these technology assessments the follow-on contract was funded to develop a technology verification. Due to funding limitations this technology verification program was divided into two separate follow-on contracts. Under this follow-on contract, the following tasks were performed: Measure Attenuation Coefficient of 3M FC-104, FC-77, FC-43 with temperature and attenuation coefficient of sapphire, generate finite element/finite difference thermal/structural model of the HEX double window, determine thermal/structural response from the proposed operating conditions, develop option response data from the deflection/stress inputs, recommend design and operating parameters for demonstrator and operational HEX double window, generate Level 1 layouts and drawings of double paned demonstrator window and window mount/manifold, and generate preliminary layout drawings of shutter. Thermal and structural analyses were conducted for both the operational and demonstrator window heat exchanger (HEX) designs and operating conditions.

  14. WINDOW 4.0: Documentation of calculation procedures

    SciTech Connect

    Finlayson, E.U.; Arasteh, D.K.; Huizenga, C.; Rubin, M.D.; Reilly, M.S.

    1993-07-01

    WINDOW 4.0 is a publicly available IBM PC compatible computer program developed by the Building Technologies Group at the Lawrence Berkeley Laboratory for calculating the thermal and optical properties necessary for heat transfer analyses of fenestration products. This report explains the calculation methods used in WINDOW 4.0 and is meant as a tool for those interested in understanding the procedures contained in WINDOW 4.0. All the calculations are discussed in the International System of units (SI). WINDOW 4.0 is the latest in a series of programs released by the Lawrence Berkeley Laboratory. The WINDOW program has its roots in a paper detailing a method for calculating heat transfer through windows [Rubin, 1982]. WINDOW 4.0 replaces the widely used 3.1 version. Although WINDOW 4.0 is a major revision, many of the algorithms used in WINDOW 4.0 build upon those previously documented [Arasteh, 1989b], [Furler, 1991]. This report documents the calculations that are unchanged from WINDOW 3.1, as well as those calculations that are new to WINDOW 4.0. This report uses the organization of the WINDOW 4.0 program. Results displayed on a WINDOW 4.0 screen are discussed in a section describing that screen. In the conclusion the aspects of the calculation method currently slated for revision are discussed. A glossary of variables used throughout the report is found in Section 11.

  15. Continuous neural network with windowed Hebbian learning.

    PubMed

    Fotouhi, M; Heidari, M; Sharifitabar, M

    2015-06-01

    We introduce an extension of the classical neural field equation where the dynamics of the synaptic kernel satisfies the standard Hebbian type of learning (synaptic plasticity). Here, a continuous network in which changes in the weight kernel occurs in a specified time window is considered. A novelty of this model is that it admits synaptic weight decrease as well as the usual weight increase resulting from correlated activity. The resulting equation leads to a delay-type rate model for which the existence and stability of solutions such as the rest state, bumps, and traveling fronts are investigated. Some relations between the length of the time window and the bump width is derived. In addition, the effect of the delay parameter on the stability of solutions is shown. Also numerical simulations for solutions and their stability are presented. PMID:25677526

  16. A CLIPS/X-window interface

    NASA Technical Reports Server (NTRS)

    Pohl, Kym Jason

    1991-01-01

    The design and implementation of an interface between the C Language Integrated Production System (CLIPS) expert system development environment and the graphic user interface development tools of the X-Window system are described. The underlying basis of the CLIPS/X-Window is a client-server model in which multiple clients can attach to a single server that interprets, executes, and returns operation results, in response to client action requests. Implemented in an AIX (UNIX) operating system environment, the interface has been successfully applied in the development of graphics interfaces for production rule cooperating agents in a knowledge-based computer aided design (CAD) system. Initial findings suggest that the client-server model is particularly well suited to a distributed parallel processing operational mode in a networked workstation environment.

  17. Performance Criteria for Residential Zero Energy Windows

    SciTech Connect

    Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

    2006-10-09

    This paper shows that the energy requirements for today's typical efficient window products (i.e. ENERGY STAR{trademark} products) are significant when compared to the needs of Zero Energy Homes (ZEHs). Through the use of whole house energy modeling, typical efficient products are evaluated in five US climates and compared against the requirements for ZEHs. Products which meet these needs are defined as a function of climate. In heating dominated climates, windows with U-factors of 0.10 Btu/hr-ft{sup 2}-F (0.57 W/m{sup 2}-K) will become energy neutral. In mixed heating/cooling climates a low U-factor is not as significant as the ability to modulate from high SHGCs (heating season) to low SHGCs (cooling season).

  18. OBSERVATIONAL WINDOW FUNCTIONS IN PLANET TRANSIT SURVEYS

    SciTech Connect

    Von Braun, Kaspar; Kane, Stephen R.; Ciardi, David R. E-mail: skane@ipac.caltech.edu

    2009-09-01

    The probability that an existing planetary transit is detectable in one's data is sensitively dependent upon the window function of the observations. We quantitatively characterize and provide visualizations of the dependence of this probability as a function of orbital period upon several observing strategy and astrophysical parameters, such as length of observing run, observing cadence, length of night, transit duration and depth, and the minimum number of sampled transits. The ability to detect a transit is directly related to the intrinsic noise of the observations. In our simulations of observational window functions, we explicitly address noncorrelated (Gaussian or white) noise and correlated (red) noise and discuss how these two noise components affect transit detectability in fundamentally different manners, especially for long periods and/or small transit depths. We furthermore discuss the consequence of competing effects on transit detectability, elaborate on measures of observing strategies, and examine the projected efficiency of different transit survey scenarios with respect to certain regions of parameter space.

  19. Shatter-Resistant, Flame-Resistant Window

    NASA Technical Reports Server (NTRS)

    Richardson, William R.; Walker, Ernie D.

    1989-01-01

    Combustion-chamber window combines properties of polycarbonate and sapphire. Inner layer of sapphire, withstands flame in chamber. Outer layer of polycarbonate tough but susceptible to weakening by flame and protected from flame by sapphire layer. Resists flames, shattering, and high pressure. Windows withstand 60 lb/in. to second power (414 kPa) in hydrostatic pressure vessel. Also survives leak test under internal pressure of 2 atm (0.2 MPa) of helium and external pressure of 10 to negative fifth power torr (1.3 mPa). Has transmission density of 0.08 to 0.11 in visible light. In contrast, unbonded layers have transmission density of 0.13 to 0.16.

  20. An expert system for window glazing design

    SciTech Connect

    Foss, R.V. ); Droste, D.H.

    1990-01-01

    An integrated expert system was developed to facilitate the design of window glass for structural strength, hydrostatic loads, sound attenuation, and solar control. The integrated software consists of a text-based interface, a rule-based expert system, and two neural networks. The text of a glazing design guide is linked by related topics and concepts. The software's design feature lets the user enter design parameters for the window choice via an interactive consultation in to a rule-based expert system that critiques the design. The technical aspects of the glass's structural strength are based primarily on linear methods published by the American Architectural Manufacturers Association Statistical correlations for the new nonlinear failure prediction for glass strength are used to automatically design for the minimum glass thickness required to withstand a specified load. Neural networks estimate values for sound attenuation and solar transmission characteristics from laboratory test data on selected glass constructions.

  1. Energy performance analysis of prototype electrochromic windows

    SciTech Connect

    Sullivan, R.; Rubin, M.; Selkowitz, S.

    1996-12-01

    This paper presents the results of a study investigating the energy performance of three newly developed prototype electrochromic devices. The DOE-2.1 E energy simulation program was used to analyze the annual cooling, lighting, and total electric energy use and peak demand as a function of window type and size. The authors simulated a prototypical commercial office building module located in the cooling-dominated locations of Phoenix, AZ and Miami, FL. Heating energy use was also studied in the heating-dominated location of Madison, WI. Daylight illuminance was used to control electrochromic state-switching. Two types of window systems were analyzed; i.e., the outer pane electrochromic glazing was combined with either a conventional low-E or a spectrally selective inner pane. The properties of the electrochromic glazings are based on measured data of new prototypes developed as part of a cooperative DOE-industry program. The results show the largest difference in annual electric energy performance between the different window types occurs in Phoenix and is about 6.5 kWh/m{sup 2} floor area (0.60 kWh/ft{sup 2}) which can represent a cost of about $.52/m{sup 2} ($.05/ft{sup 2}) using electricity costing $.08/kWh. In heating-dominated locations, the electrochromic should be maintained in its bleached state during the heating season to take advantage of beneficial solar heat gain which would reduce the amount of required heating. This also means that the electrochromic window with the largest solar heat gain coefficient is best.

  2. Diamond windows in a thermal shock environment

    SciTech Connect

    Klein, C.A.

    1995-12-31

    For most infrared-transmitting materials the primary cause of failure in a missile window/dome application can be attributed to brittle fracture induced by tensile stresses originating from instantaneous temperature gradients generated by aerodynamic heating. To describe the thermal shock I rely on the well known expression for the maximum stress experienced by a clamped plate (or a complete sphere), if there is a linear temperature variation across the thickness and both surfaces are free to expand.

  3. Diamondlike carbon protective coatings for optical windows

    NASA Technical Reports Server (NTRS)

    Swec, Diane M.; Mirtich, Michael J.

    1989-01-01

    Diamondlike carbon (DLC) films were deposited on infrared transmitting optical windows and were evaluated as protective coatings for these windows exposed to particle and rain erosion. The DLC films were deposited on zinc selenide (ZnSe) and zinc sulfide (ZnS) by three different ion beam methods: (1) sputter deposition from a carbon target using an 8-cm argon ion source; (2) direct deposition by a 30-cm hollow cathode ion source with hydrocarbon gas in argon; and (3) dual beam direct deposition by the 30-cm hollow cathode ion source and an 8-cm argon ion source. In an attempt to improve the adherence of the DLC films on ZnSc and ZnS, ion beam cleaning, ion implantation with helium and neon ions, or sputter deposition of a thin, ion beam intermediate coating was employed prior to deposition of the DLC film. The protection that the DLC films afforded the windows from particle and rain erosion was evaluated, along with the hydrogen content, adherence, intrinsic stress, and infrared transmittance of the films. Because of the elevated stress levels in the ion beam sputtered DLC films and in those ion beam deposited with butane, films thicker than 0.1 micron and with good adherence on ZnS and ZnSe could not be generated. An intermediate coating of germanium successfully allowed the DLC films to remain adherent to the optical windows and caused only negligible reduction in the specular transmittance of the ZnS and ZnSe at 10 microns.

  4. DETAIL VIEW, OXEYE WINDOW, SOUTH WALL OF SOUTH GARRET. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, OX-EYE WINDOW, SOUTH WALL OF SOUTH GARRET. THE MUNTIN PATTERN USED IN THIS WINDOW WAS REFERRED TO AS “GOTHIC” IN THE EIGHTEENTH CENTURY - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  5. Evaluation criteria and test methods for electrochromic windows

    SciTech Connect

    Czanderna, A.W. ); Lampert, C.M. )

    1990-07-01

    Report summarizes the test methods used for evaluating electrochromic (EC) windows, and summarizes what is known about degradation of their performance, and recommends methods and procedures for advancing EC windows for buildings applications. 77 refs., 13 figs., 6 tabs.

  6. 10. TYPICAL SIDE WALL WINDOW AND WATER TABLE. The water ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. TYPICAL SIDE WALL WINDOW AND WATER TABLE. The water table is an extension of the order base, and the lower torus breaks for ventilation, which applies to all windows. - Westminster Presbyterian Church, 273 Meeting Street, Charleston, Charleston County, SC

  7. WINDOW WITH ORIGINAL PANELED FOLDING SHUTTERS, SECOND FLOOR FRONT ROOM, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WINDOW WITH ORIGINAL PANELED FOLDING SHUTTERS, SECOND FLOOR FRONT ROOM, LOOKING OUT WALNUT STREET (SOUTH). NOTE ALTERED LOWER SECTION MADE CA. 1840. Compare window in PA-1436 A-37 - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA

  8. 35. DETAIL VIEW, WEST WINDOW IN WEST ELEVATION GABLE (NOTE: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. DETAIL VIEW, WEST WINDOW IN WEST ELEVATION GABLE (NOTE: THE MOLDED STRINGCOURSE THAT PROJECTS FROM THE BASE OF THE FIRST FLOOR WINDOW ARCH AND VISIBLE WATERTABLE) - Kenworthy Hall, State Highway 14 (Greensboro Road), Marion, Perry County, AL

  9. Diamond technology for Endo-KEW seeker windows

    NASA Astrophysics Data System (ADS)

    Ravi, K. V.

    1992-05-01

    The attractions of low pressure synthesized diamond films and thick diamond slabs for Endo-KEW seeker window applications are presented. The use of diamond in two forms, as thin films in combination with silicon windows and as thick, free standing windows are discussed. A novel concept of internally cooled silicon/diamond windows that can withstand the rigors of high velocity, endo-atmospheric flight, that do not suffer from window irradiation resulting from aero-optic effects and have the potential for application as multispectral windows is discussed. The synthesis and processing aspects of thin diamond films and free standing diamond windows are presented with an analysis of the significant advantages of silicon and diamond for the fabrication of Endo-KEW seeker windows.

  10. DETAIL, EAST ELEVATION. THIS LUNETTE WINDOW POSITIONED IN A BLIND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL, EAST ELEVATION. THIS LUNETTE WINDOW POSITIONED IN A BLIND ARCH ECHOES A SIMILAR TREATMENT OF THE VENETIAN WINDOWS IN THE HOUSE - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  11. 12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all triple windows on first and second floors. Note single swing jib door - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  12. 23. CORNICES AND WINDOW ARCHITRAVES OF SOUTHEAST AND SOUTHWEST ROOMS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. CORNICES AND WINDOW ARCHITRAVES OF SOUTHEAST AND SOUTHWEST ROOMS, FIRST FLOOR. Door architraves similar to window architraves. - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  13. Orthogonal sets of data windows constructed from trigonometric polynomials

    NASA Technical Reports Server (NTRS)

    Greenhall, C. A.

    1989-01-01

    Suboptimal, easily computable substitutes for the discrete prolate-spheroidal windows used by Thomson for spectral estimation are given. Trigonometric coefficients and energy leakages of the window polynomials are tabulated.

  14. 13. INTERIOR OF NORTHEAST PHOTO TOWER WITH WINDOW OPEN; ELECTRICAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR OF NORTHEAST PHOTO TOWER WITH WINDOW OPEN; ELECTRICAL POWER BOX BELOW WINDOW - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  15. Energy and Power Evaluation Program for Windows

    2000-06-27

    ENPEP for windows has its origins in the DOS version of the software, however, the Windows release is significantly modified and rather different in structure and capabilities from the older DOS version of ENPEP. ENPEP for Windows provides the user with a graphical interface for designing a comprehensive model of the energy system of a country or region. The BALANCE submodel processes a representative network of all energy production, conversion, transport, distribution, and utilization activitiesmore » in a country (or region) as well as the flows of energy and fuels among these activities. The objective of the model is to simulate energy market and determine energy supply and demand balance over a long-term period of up to 75 years. The environmental aspect is also taken into account by calculating the emissions of various pollutants. In addition to the energy costs, the environmental costs are also calculated by the model. These costs can be used to affect the solution found by the market equilibrium algorithm. The main purpose of the software is to provide analytical capability and tools for the various analyses of energy and environmental systems, as well as for development of long-term energy strategy of a country or region.« less

  16. Microwave Plasma Window Theory and Experiments

    NASA Astrophysics Data System (ADS)

    McKelvey, Andrew; Zheng, Peng; Franzi, Matthew; Lau, Y. Y.; Gilgenbach, Ronald; Plasma, Pulsed Power,; Microwave Laboratory Team

    2011-10-01

    The microwave plasma window is an experiment designed to promote RF breakdown in a controlled vacuum-gas environment using a DC bias. Experimental data has shown that this DC bias will significantly reduce the RF power required to yield breakdown, a feature also shown in recent simulation. The cross-polarized conducting array is biased at (100's V) DC on the surface of a Lucite vacuum window. Microwave power is supplied to the window's surface by a single 1-kW magnetron operating at 2.45 GHz CW. The goal of this project is to establish controllable characteristics relating vacuum pressure, DC bias, RF power required for surface breakdown, as well as RF transmission after the formation of plasma. Experimental data will be compared with multipactor susceptibility curves generated using a Monte Carlo simulation which incorporates an applied DC bias and finite pressures of air and argon. Research supported by an AFOSR grant on the Basic Physics of Distributed Plasma Discharge, AFRL, L-3 Communications, and Northrop Grumman.

  17. A review of electrochromic window performance factors

    SciTech Connect

    Selkowitz, S.E.; Rubin, M.; Lee, E.S.; Sullivan, R.; Finlayson, E.; Hopkins, D.

    1994-04-01

    The performance factors which will influence the market acceptance of electrochromic windows are reviewed. A set of data representing the optical properties of existing and foreseeable electrochromic window devices was generated. The issue of reflective versus absorbing electrochromics was explored. This data was used in the DOE 2.1 building energy model to calculate the expected energy savings compared to conventional glazings. The effects of several different control strategies were tested. Significant energy and peak electric demand benefits were obtained for some electrochromic types. Use of predictive control algorithms to optimize cooling control may result in greater energy savings. Initial economic results considering annual savings, cooling equipment cost savings, and electrochromic window costs are presented. Calculations of thermal and visual comfort show additional benefits from electrochromics but more work is needed to quantify their importance. The design freedom and aesthetic possibilities of these dynamic glazings should provide additional market benefits, but their impact is difficult to assess at this time. Ultimately, a full assessment of the market viability of electrochromics must consider the impacts of all of these issues.

  18. Flexible solid-state photoelectrochromic windows

    SciTech Connect

    Pichot, F.; Ferrere, S.; Pitts, R.J.; Gregg, B.A.

    1999-11-01

    Photoelectrochromic smart window technology is extended to include the use of flexible substrates and solid-state electrolytes. This should facilitate their application as retrofit modifications of office windows, where, by blocking incoming solar irradiation, they could substantially lower air-conditioning costs. These devices are based on a dye-sensitized TiO{sub 2} electrode coupled with a 500 nm thick WO{sub 3} electrochromic counter electrode, separated by a cross-linked polymer electrolyte containing LiI. A novel method for preparing conducting nanoporous TiO{sub 2} films is described that allows for the construction of these devices on flexible organic substrates. Colloidal solutions of TiO{sub 2} free of surfactants were spin-coated onto indium-tin oxide coated polyester substrates, resulting in highly transparent films ranging from 100 nm to 1 {micro}m in thickness. Upon annealing at 100 C, these films were strongly adherent and displayed excellent photoconductivity as shown by their current-voltage characteristics. The devices typically transmit 75% of visible light in the bleached state. After a few minutes of exposure to white light (75 mW/cm{sup 2}), the windows turn dark blue, transmitting only 30% of visible light. They spontaneously bleach back to their initial noncolored state upon removal of the light source.

  19. Window Area and Development Drive Spatial Variation in Bird-Window Collisions in an Urban Landscape

    PubMed Central

    Hager, Stephen B.; Cosentino, Bradley J.; McKay, Kelly J.; Monson, Cathleen; Zuurdeeg, Walt; Blevins, Brian

    2013-01-01

    Collisions with windows are an important human-related threat to birds in urban landscapes. However, the proximate drivers of collisions are not well understood, and no study has examined spatial variation in mortality in an urban setting. We hypothesized that the number of fatalities at buildings varies with window area and habitat features that influence avian community structure. In 2010 we documented bird-window collisions (BWCs) and characterized avian community structure at 20 buildings in an urban landscape in northwestern Illinois, USA. For each building and season, we conducted 21 daily surveys for carcasses and nine point count surveys to estimate relative abundance, richness, and diversity. Our sampling design was informed by experimentally estimated carcass persistence times and detection probabilities. We used linear and generalized linear mixed models to evaluate how habitat features influenced community structure and how mortality was affected by window area and factors that correlated with community structure. The most-supported model was consistent for all community indices and included effects of season, development, and distance to vegetated lots. BWCs were related positively to window area and negatively to development. We documented mortalities for 16/72 (22%) species (34 total carcasses) recorded at buildings, and BWCs were greater for juveniles than adults. Based on the most-supported model of BWCs, the median number of annual predicted fatalities at study buildings was 3 (range = 0–52). These results suggest that patchily distributed environmental resources and levels of window area in buildings create spatial variation in BWCs within and among urban areas. Current mortality estimates place little emphasis on spatial variation, which precludes a fundamental understanding of the issue. To focus conservation efforts, we illustrate how knowledge of the structural and environmental factors that influence bird-window collisions can be used

  20. A Windowing Frequency Domain Adaptive Filter for Acoustic Echo Cancellation

    NASA Astrophysics Data System (ADS)

    Wu, Sheng; Qiu, Xiaojun

    This letter proposes a windowing frequency domain adaptive algorithm, which reuses the filtering error to apply window function in the filter updating symmetrically. By using a proper window function to reduce the negative influence of the spectral leakage, the proposed algorithm can significantly improve the performance of the acoustic echo cancellation for speech signals.

  1. 14 CFR 29.775 - Windshields and windows.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Windshields and windows. 29.775 Section 29.775 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Accommodations § 29.775 Windshields and windows. Windshields and windows must be made of material that will...

  2. 14 CFR 27.775 - Windshields and windows.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Windshields and windows. 27.775 Section 27.775 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... § 27.775 Windshields and windows. Windshields and windows must be made of material that will not...

  3. Nonuniform Effects of Reinstatement within the Time Window

    ERIC Educational Resources Information Center

    Galluccio, Llissa; Rovee-Collier, Carolyn

    2006-01-01

    A time window is a limited period after an event initially occurs in which additional information can be integrated with the memory of that event. It shuts when the memory is forgotten. The time window hypothesis holds that the impact of a manipulation at different points within the time window is nonuniform. In two operant conditioning…

  4. A note on windowing for the waveform relaxation

    NASA Technical Reports Server (NTRS)

    Zhang, Hong

    1994-01-01

    The technique of windowing has been often used in the implementation of the waveform relaxations for solving ODE's or time dependent PDE's. Its efficiency depends upon problem stiffness and operator splitting. Using model problems, the estimates for window length and convergence rate are derived. The electiveness of windowing is then investigated for non-stiff and stiff cases respectively. lt concludes that for the former, windowing is highly recommended when a large discrepancy exists between the convergence rate on a time interval and the ones on its subintervals. For the latter, windowing does not provide any computational advantage if machine features are disregarded. The discussion is supported by experimental results.

  5. Measure Guideline. Energy-Efficient Window Performance and Selection

    SciTech Connect

    Carmody, John; Haglund, Kerry

    2012-11-01

    This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all U.S. climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The report also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well.

  6. Highly Insulating Windows Volume Purchase Program Final Report

    SciTech Connect

    2013-04-01

    This report documents the development, execution outcomes and lessons learned of the Highly Insulating Windows Volume Purchase (WVP) Program carried out over a three-year period from 2009 through 2012. The primary goals of the program were met: 1) reduce the incremental cost of highly insulating windows compared to ENERGY STAR windows; and 2) raise the public and potential buyers’ awareness of highly insulating windows and their benefits. A key outcome of the program is that the 2013 ENERGY STAR Most Efficient criteria for primary residential windows were adopted from the technical specifications set forth in the WVP program.

  7. Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools

    SciTech Connect

    Gustavsen, Arild; Arasteh, Dariush; Jelle, Bjorn Petter; Curcija, Charlie; Kohler, Christian

    2008-09-11

    While window frames typically represent 20-30% of the overall window area, their impact on the total window heat transfer rates may be much larger. This effect is even greater in low-conductance (highly insulating) windows that incorporate very low-conductance glazing. Developing low-conductance window frames requires accurate simulation tools for product research and development. Based on a literature review and an evaluation of current methods of modeling heat transfer through window frames, we conclude that current procedures specified in ISO standards are not sufficiently adequate for accurately evaluating heat transfer through the low-conductance frames. We conclude that the near-term priorities for improving the modeling of heat transfer through low-conductance frames are: (1) Add 2D view-factor radiation to standard modeling and examine the current practice of averaging surface emissivity based on area weighting and the process of making an equivalent rectangular frame cavity. (2) Asses 3D radiation effects in frame cavities and develop recommendation for inclusion into the design fenestration tools. (3) Assess existing correlations for convection in vertical cavities using CFD. (4) Study 2D and 3D natural convection heat transfer in frame cavities for cavities that are proven to be deficient from item 3 above. Recommend improved correlations or full CFD modeling into ISO standards and design fenestration tools, if appropriate. (5) Study 3D hardware short-circuits and propose methods to ensure that these effects are incorporated into ratings. (6) Study the heat transfer effects of ventilated frame cavities and propose updated correlations.

  8. Two Cases of Malleostapedotomy in Congenital Oval Window Atresia

    PubMed Central

    Ahn, Sang Hyeon; Kim, Da Hee; Choi, Jae Young

    2013-01-01

    Congenital anomaly of the oval window with an abnormal facial nerve course is an uncommon embryological defect, which is related to the underdevelopment of second branchial arch derivatives. Some treatments for improving hearing levels are available; these include hearing aids, vestibulotomy, neo-oval window formation, and stapes surgeries, including incudostapedotomy and malleostapedotomy. However, surgery for congenital anomalies of the oval window has rarely been described, usually in very small series of patients. We describe two cases of congenital anomalies of the oval window with aberrant facial nerve courses. One was a 40-year-old male diagnosed with unilateral congenital oval window atresia; the other was a 10-year-old male diagnosed with bilateral congenital oval window atresia. We also describe the clinical manifestations and treatment outcomes of malleostapedotomy for congenital anomalies of the oval window with aberrant facial nerve courses. PMID:24653925

  9. Improving Wang-Landau sampling with adaptive windows

    NASA Astrophysics Data System (ADS)

    Cunha-Netto, A. G.; Caparica, A. A.; Tsai, Shan-Ho; Dickman, Ronald; Landau, D. P.

    2008-11-01

    Wang-Landau sampling (WLS) of large systems requires dividing the energy range into “windows” and joining the results of simulations in each window. The resulting density of states (and associated thermodynamic functions) is shown to suffer from boundary effects in simulations of lattice polymers and the five-state Potts model. Here, we implement WLS using adaptive windows. Instead of defining fixed energy windows (or windows in the energy-magnetization plane for the Potts model), the boundary positions depend on the set of energy values on which the histogram is flat at a given stage of the simulation. Shifting the windows each time the modification factor f is reduced, we eliminate border effects that arise in simulations using fixed windows. Adaptive windows extend significantly the range of system sizes that may be studied reliably using WLS.

  10. High-R Window Technology Development : Phase II Final Report.

    SciTech Connect

    Arasteh, Dariush

    1991-01-01

    Of all building envelope elements, windows always have had the highest heat loss rates. However, recent advances in window technologies such as low-emissivity (low-E) coatings and low- conductivity gas fillings have begun to change the status of windows in the building energy equation, raising the average R-value (resistance to heat flow) from 2 to 4 h-ft{sup 2}-{degrees}F/Btu. Building on this trend and using a novel combination of low-E coatings, gas-fills, and three glazing layers, the authors developed a design concept for R-6 to R-10 super'' windows. Three major window manufacturers produced prototype superwindows based this design for testing and demonstration in three utility-sponsored and -monitored energy-conserving homes in northwestern Montana. This paper discusses the design and tested performance of these three windows and identifies areas requiring further research if these window concepts are to be successfully developed for mass markets.

  11. High-R window technology development. Phase 2, Final report

    SciTech Connect

    Arasteh, D.

    1991-01-01

    Of all building envelope elements, windows always have had the highest heat loss rates. However, recent advances in window technologies such as low-emissivity (low-E) coatings and low- conductivity gas fillings have begun to change the status of windows in the building energy equation, raising the average R-value (resistance to heat flow) from 2 to 4 h-ft{sup 2}-{degrees}F/Btu. Building on this trend and using a novel combination of low-E coatings, gas-fills, and three glazing layers, the authors developed a design concept for R-6 to R-10 ``super`` windows. Three major window manufacturers produced prototype superwindows based this design for testing and demonstration in three utility-sponsored and -monitored energy-conserving homes in northwestern Montana. This paper discusses the design and tested performance of these three windows and identifies areas requiring further research if these window concepts are to be successfully developed for mass markets.

  12. Mechanical charactization of sonar window materials

    SciTech Connect

    DeTeresa, S.J.; Groves, S.E.; Harwood, P.J.; Sanchez, R.J.

    1996-03-25

    The three-dimensional mechanical behavior of thick Spectra/epoxy sonar window materials containing various special materials is summarized in this report. Three different materials, which were fabricated by two companies known as `A` and `B` were received from the Naval Warfare Center. The three materials designated `A with microspheres (A micron),` `A without microspheres (A),` and `B` were measured for all properties. The total number of tests was reduced through the assumption that the two orthogonal, in-place directions were identical. Consequently, these materials should have only six independent elastic variables. The measured constants and strengths are given.

  13. Infrared window materials and their fabrication

    SciTech Connect

    Chess, D.L.; White, W.B.

    1984-07-24

    Process for making densified ternary sulfide ceramics as infrared window materials using sulfide compounds MLn/sub 2/S/sub 4/ belonging to the Th/sub 3/P/sub 4/, CaFe/sub 2/O/sub 4/ and spinel structure types. These refractory sulfides show good sinterability especially when fired in flowing hydrogen sulfide, and they can be densified by a combination of hot-pressing and hot-isostatic pressing into ceramic pieces approaching their theoretical density with closed pores and which have good transmission characteristics in the infrared region.

  14. X-Windows PVT Widget Class

    NASA Technical Reports Server (NTRS)

    Barry, Matthew R.

    2006-01-01

    The X-Windows Process Validation Table (PVT) Widget Class ( Class is used here in the object-oriented-programming sense of the word) was devised to simplify the task of implementing network registration services for Information Sharing Protocol (ISP) graphical-user-interface (GUI) computer programs. Heretofore, ISP PVT programming tasks have required many method calls to identify, query, and interpret the connections and messages exchanged between a client and a PVT server. Normally, programmers have utilized direct access to UNIX socket libraries to implement the PVT protocol queries, necessitating the use of many lines of source code to perform frequent tasks. Now, the X-Windows PVT Widget Class encapsulates ISP client server network registration management tasks within the framework of an X Windows widget. Use of the widget framework enables an X Windows GUI program to interact with PVT services in an abstract way and in the same manner as that of other graphical widgets, making it easier to program PVT clients. Wrapping the PVT services inside the widget framework enables a programmer to treat a PVT server interface as though it were a GUI. Moreover, an alternate subclass could implement another service in a widget of the same type. This program was written by Matthew R. Barry of United Space Alliance for Johnson Space Center. For further information, contact the Johnson Technology Transfer Office at (281) 483-3809. MSC-23582 Shuttle Data Center File- Processing Tool in Java A Java-language computer program has been written to facilitate mining of data in files in the Shuttle Data Center (SDC) archives. This program can be executed on a variety of workstations or via Web-browser programs. This program is partly similar to prior C-language programs used for the same purpose, while differing from those programs in that it exploits the platform-neutrality of Java in implementing several features that are important for analysis of large sets of time-series data

  15. Window taper functions for subaperture processing.

    SciTech Connect

    Doerry, Armin Walter

    2013-12-01

    It is well known that the spectrum of a signal can be calculated with a Discrete Fourier Transform (DFT), where best resolution is achieved by processing the entire data set. However, in some situations it is advantageous to use a staged approach, where data is first processed within subapertures, and the results are then combined and further processed to a final result. An artifact of this approach is the creation of grating lobes in the final response. The nature of the grating lobes, including their amplitude and spacing, is an artifact of window taper functions, subaperture offsets, and subaperture processing parameters. We assess these factors and exemplify their effects.

  16. Fused Silica and Other Transparent Window Materials

    NASA Technical Reports Server (NTRS)

    Salem, Jon

    2016-01-01

    Several transparent ceramics, such as spinel and AlONs are now being produced in sufficient large areas to be used in space craft window applications. The work horse transparent material for space missions from Apollo to the International Space Station has been fused silica due in part to its low coefficient of expansion and optical quality. Despite its successful use, fused silica exhibits anomalies in its crack growth behavior, depending on environmental preconditioning and surface damage. This presentation will compare recent optical ceramics to fused silica and discuss sources of variation in slow crack growth behavior.

  17. "Virtual Cockpit Window" for a Windowless Aerospacecraft

    NASA Technical Reports Server (NTRS)

    Abernathy, Michael F.

    2003-01-01

    A software system processes navigational and sensory information in real time to generate a three-dimensional-appearing image of the external environment for viewing by crewmembers of a windowless aerospacecraft. The design of the particular aerospacecraft (the X-38) is such that the addition of a real transparent cockpit window to the airframe would have resulted in unacceptably large increases in weight and cost. When exerting manual control, an aircrew needs to see terrain, obstructions, and other features around the aircraft in order to land safely. The X-38 is capable of automated landing, but even when this capability is utilized, the crew still needs to view the external environment: From the very beginning of the United States space program, crews have expressed profound dislike for windowless vehicles. The wellbeing of an aircrew is considerably promoted by a three-dimensional view of terrain and obstructions. The present software system was developed to satisfy the need for such a view. In conjunction with a computer and display equipment that weigh less than would a real transparent window, this software system thus provides a virtual cockpit window. The key problem in the development of this software system was to create a realistic three-dimensional perspective view that is updated in real time. The problem was solved by building upon a pre-existing commercial program LandForm C3 that combines the speed of flight-simulator software with the power of geographic-information-system software to generate real-time, three-dimensional-appearing displays of terrain and other features of flight environments. In the development of the present software, the pre-existing program was modified to enable it to utilize real-time information on the position and attitude of the aerospacecraft to generate a view of the external world as it would appear to a person looking out through a window in the aerospacecraft. The development included innovations in realistic

  18. Environment resistant windows for space greenhouses

    NASA Astrophysics Data System (ADS)

    Gan, B. K.; Kondyurin, A.; Bilek, M.; Latella, B. A.

    One of the ways of providing a self-sustainable environment in space is to provide food and life support systems through bio-regenerative power i e a greenhouse It is an essential structure because it provides oxygen and food in a controlled environment The windows and frames of a greenhouse are generally made from glass or polymer panels which allow sunlight to enter Polymers are useful because they are lightweight transparent corrosion resistant and inexpensive However windows which are made from polymeric materials or polymer-based composites suffer from accelerated erosion due to the presence of atomic oxygen in space environment A metal oxide deposited on the surface of the polymer will aid in the resistance of these polymers to chemical attack as well as improving surface hardness and wear resistance characteristics In this study we modified the surfaces of polycarbonate PC by deposition and implantation of thin and transparent aluminium oxide Al 2 O 3 coatings The Al 2 O 3 plasma was produced using a cathodic arc deposition system with a combination of plasma immersion ion implantation PIII The coatings were then tested for resistance to atomic oxygen environment These were carried out by monitoring the mass loss of the deposited samples exposed to an rf oxygen plasma The morphology and optical properties of the coatings before and after exposure to oxygen plasma were then examined using electron microscopy profilometry and ellipsometry Mechanical properties and adhesion characteristics of the coatings

  19. The GODDESS ionization chamber: developing robust windows

    NASA Astrophysics Data System (ADS)

    Blanchard, Rose; Baugher, Travis; Cizewski, Jolie; Pain, Steven; Ratkiewicz, Andrew; Goddess Collaboration

    2015-10-01

    Reaction studies of nuclei far from stability require high-efficiency arrays of detectors and the ability to identify beam-like particles, especially when the beam is a cocktail beam. The Gammasphere ORRUBA Dual Detectors for Experimental Structure Studies (GODDESS) is made up of the Oak Ridge-Rutgers University Barrel Array (ORRUBA) of silicon detectors for charged particles inside of the gamma-ray detector array Gammasphere. A high-rate ionization chamber is being developed to identify beam-like particles. Consisting of twenty-one alternating anode and cathode grids, the ionization chamber sits downstream of the target chamber and is used to measure the energy loss of recoiling ions. A critical component of the system is a thin and robust mylar window which serves to separate the gas-filled ionization chamber from the vacuum of the target chamber with minimal energy loss. After construction, windows were tested to assure that they would not break below the required pressure, causing harm to the wire grids. This presentation will summarize the status of the ionization chamber and the results of the first tests with beams. This work is supported in part by the U.S. Department of Energy and National Science Foundation.

  20. Prediction of particulate contamination on aperture window

    NASA Technical Reports Server (NTRS)

    Lee, Aleck L.; Fong, Michael C.

    1994-01-01

    This paper presents an analysis to predict the effects of light scattering by surface particles on the sensor window of a missile during ascent flight. The particulate contaminant distribution on the window is calculated by tallying the number of particles in a set of size ranges. The particulate contamination at the end of the mission is predicted by adding the contributions from the events of ground and flight operations. The surface particle redistributions caused by vibroacoustically induced surface acceleration was found to contribute the most of the particulate surface contamination. The analytical surface obscuration calculation with a set of particle counts was compared to the results of image analyzer measurement. The analytical results, which were calculated with a given function of particle shape depending on the size, were more conservative than the measurement. A scattering calculation using a verified BSDF model showed that the scattering was less than 0.001 at 20 off the direction of the incident light in the mid IR wavelength when the surfaces were at Level 300 initially.

  1. User's manual for the Gaussian windows program

    NASA Technical Reports Server (NTRS)

    Jaeckel, Louis A.

    1992-01-01

    'Gaussian Windows' is a method for exploring a set of multivariate data, in order to estimate the shape of the underlying density function. The method can be used to find and describe structural features in the data. The method is described in two earlier papers. I assume that the reader has access to both of these papers, so I will not repeat material from them. The program described herein is written in BASIC and it runs on an IBM PC or PS/2 with the DOS 3.3 operating system. Although the program is slow and has limited memory space, it is adequate for experimenting with the method. Since it is written in BASIC, it is relatively easy to modify. The program and some related files are available on a 3-inch diskette. A listing of the program is also available. This user's manual explains the use of the program. First, it gives a brief tutorial, illustrating some of the program's features with a set of artificial data. Then, it describes the results displayed after the program does a Gaussian window, and it explains each of the items on the various menus.

  2. Real time programming environment for Windows

    SciTech Connect

    LaBelle, D.R.

    1998-04-01

    This document provides a description of the Real Time Programming Environment (RTProE). RTProE tools allow a programmer to create soft real time projects under general, multi-purpose operating systems. The basic features necessary for real time applications are provided by RTProE, leaving the programmer free to concentrate efforts on his specific project. The current version supports Microsoft Windows{trademark} 95 and NT. The tasks of real time synchronization and communication with other programs are handled by RTProE. RTProE includes a generic method for connecting a graphical user interface (GUI) to allow real time control and interaction with the programmer`s product. Topics covered in this paper include real time performance issues, portability, details of shared memory management, code scheduling, application control, Operating System specific concerns and the use of Computer Aided Software Engineering (CASE) tools. The development of RTProE is an important step in the expansion of the real time programming community. The financial costs associated with using the system are minimal. All source code for RTProE has been made publicly available. Any person with access to a personal computer, Windows 95 or NT, and C or FORTRAN compilers can quickly enter the world of real time modeling and simulation.

  3. Wide field camera observations of Baade's Window

    NASA Technical Reports Server (NTRS)

    Holtzman, Jon A.; Light, R. M.; Baum, William A.; Worthey, Guy; Faber, S. M.; Hunter, Deidre A.; O'Neil, Earl J., Jr.; Kreidl, Tobias J.; Groth, E. J.; Westphal, James A.

    1993-01-01

    We have observed a field in Baade's Window using the Wide Field Camera (WFC) of the Hubble Space Telescope (HST) and obtain V- and I-band photometry down to V approximately 22.5. These data go several magnitudes fainter than previously obtained from the ground. The location of the break in the luminosity function suggests that there are a significant number of intermediate age (less than 10 Gyr) stars in the Galactic bulge. This conclusion rests on the assumptions that the extinction towards our field is similar to that seen in other parts of Baade's Window, that the distance to the bulge is approximately 8 kpc, and that we can determine fairly accurate zero points for the HST photometry. Changes in any one of these assumptions could increase the inferred age, but a conspiracy of lower reddening, a shorter distance to the bulge, and/or photometric zero-point errors would be needed to imply a population entirely older than 10 Gyr. We infer an initial mass function slope for the main-sequence stars, and find that it is consistent with that measured in the solar neighborhood; unfortunately, the slope is poorly constrained because we sample only a narrow range of stellar mass and because of uncertainties in the observed luminosity function at the faint end.

  4. Portable Handheld Optical Window Inspection Device

    NASA Technical Reports Server (NTRS)

    Ihlefeld, Curtis; Dokos, Adam; Burns, Bradley

    2010-01-01

    The Portable Handheld Optical Window Inspection Device (PHOWID) is a measurement system for imaging small defects (scratches, pits, micrometeor impacts, and the like) in the field. Designed primarily for window inspection, PHOWID attaches to a smooth surface with suction cups, and raster scans a small area with an optical pen in order to provide a three-dimensional image of the defect. PHOWID consists of a graphical user interface, motor control subsystem, scanning head, and interface electronics, as well as an integrated camera and user display that allows a user to locate minute defects before scanning. Noise levels are on the order of 60 in. (1.5 m). PHOWID allows field measurement of defects that are usually done in the lab. It is small, light, and attaches directly to the test article in any orientation up to vertical. An operator can scan a defect and get useful engineering data in a matter of minutes. There is no need to make a mold impression for later lab analysis.

  5. Some Statistical Properties Of The Median Window

    NASA Astrophysics Data System (ADS)

    Frieden, B. R.

    1984-02-01

    Abstract. The median window operation is being increasingly used to process images. Although the deterministic properties of the median are fairly well known, its statistical properties are not. Consider a median window of width N scanning a noisy background image with white power spectrum. We present here the probability law for the median outputs, its mean, variance, and signal-to-noise ratio, and the probability that two successive median outputs are equal. Specialization is made to speckle imagery. Key results are as follows: the probability law is of a Bernoulli multinomial form; the mean is asymptotic with N to the average background times In 2, and hence is about 30% less than the background value; the variance is asymptotic with N to a 1/N dependence; signal-to-noise ratio is asymptotic with N to Ni171 In 2. Finally, the probability that two successive median outputs are equal is 2-1(N-1)/N, or slightly less than 0.5 for N >~ 7. This is independent of the type of image data at hand, i.e., whether speckle, Poisson, or normal, provided that it has a white power spectrum.

  6. Energy Efficient Electrochromic Windows Incorporating Ionic Liquids

    SciTech Connect

    Cheri Boykin; James Finley; Donald Anthony; Julianna Knowles; Richard Markovic; Michael Buchanan; Mary Ann Fuhry; Lisa Perrine

    2008-11-30

    One approach to increasing the energy efficiency of windows is to control the amount of solar radiation transmitted through a window by using electrochromic technology. What is unique about this project is that the electrochromic is based on the reduction/oxidation reactions of cathodic and anodic organic semi-conducting polymers using room temperature ionic liquids as ion transport electrolytes. It is believed that these types of coatings would be a lower cost alternative to traditional all inorganic thin film based electrochromic technologies. Although there are patents1 based on the proposed technology, it has never been reduced to practice and thoroughly evaluated (i.e. durability and performance) in a window application. We demonstrate that by using organic semi-conductive polymers, specific bands of the solar spectrum (specifically visible and near infrared) can be targeted for electrochemical variable transmittance responsiveness. In addition, when the technology is incorporated into an insulating glass unit, the energy parameters such as the solar heat gain coefficient and the light to solar gain ratio are improved over that of a typical insulating glass unit comprised of glass with a low emissivity coating. A minimum of {approx}0.02 quads of energy savings per year with a reduction of carbon emissions for electricity of {approx}320 MKg/yr benefit is achieved over that of a typical insulating glass unit including a double silver low-E coating. Note that these values include a penalty in the heating season. If this penalty is removed (i.e. in southern climates or commercial structures where cooling is predominate year-round) a maximum energy savings of {approx}0.05 quad per year and {approx}801 MKg/yr can be achieved over that of a typical insulating glass unit including a double silver low-E coating. In its current state, the technology is not durable enough for an exterior window application. The primary downfall is that the redox chemistry fails to

  7. An innovative transparent cranial window based on skull optical clearing An innovative transparent cranial window

    NASA Astrophysics Data System (ADS)

    Wang, J.; Zhang, Y.; Xu, T. H.; Luo, Q. M.; Zhu, D.

    2012-06-01

    Noninvasive optical methods for viewing the structural and functional organization of cortex have been playing important roles in brain research, which usually suffer from turbid skull. Various cranial window models based on surgical operation have been proposed, but have respective limitations. Here, an innovative transparent cranial window of mouse was established by topically treatment with a skull optical clearing solution (SOCS), rather than by craniotomy. Based on the experiment of optical clearing efficacy of skull in vitro, we found that the turbid skull became transparent within 25 min after application of SOCS. The USAF target is visible through the treated skull, and the calculated resolution can achieve 8.4 μm. After the in vivo skull was topically treated with SOCS, the cortical micro-vessels can be visible clearly. The quantitative analysis indicated that the minimum resolution diameter of micro-vessels in 14.4±0.8 μm through the transparent cranial window closed to that in 12.8±0.9 μm of the exposed cortical micro-vessels. Further, preliminary results from Laser Speckle Imaging demonstrated that there was no influence on cortical blood flow distribution of mouse after topically treatment with SOCS on skull. This transparent cranial window will provide a convenient model for cortex imaging in vivo, which is very significant for neuroscience research.

  8. Design of the beryllium window for Brookhaven Linac Isotope Producer

    SciTech Connect

    Nayak, S.; Mapes, M.; Raparia, D.

    2015-11-01

    In the Brookhaven Linac Isotope Producer (BLIP) beam line, there were two Beryllium (Be) windows with an air gap to separate the high vacuum upstream side from low vacuum downstream side. There had been frequent window failures in the past which affected the machine productivity and increased the radiation dose received by workers due to unplanned maintenance. To improve the window life, design of Be window is reexamined. Detailed structural and thermal simulations are carried out on Be window for different design parameters and loading conditions to come up with better design to improve the window life. The new design removed the air gap and connect the both beam lines with a Be window in-between. The new design has multiple advantages such as 1) reduces the beam energy loss (because of one window with no air gap), 2) reduces air activation due to nuclear radiation and 3) increased the machine reliability as there is no direct pressure load during operation. For quick replacement of this window, an aluminum bellow coupled with load binder was designed. There hasn’t been a single window failure since the new design was implemented in 2012.

  9. Bi-level microelectronic device package with an integral window

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2004-01-06

    A package with an integral window for housing a microelectronic device. The integral window is bonded directly to the package without having a separate layer of adhesive material disposed in-between the window and the package. The device can be a semiconductor chip, CCD chip, CMOS chip, VCSEL chip, laser diode, MEMS device, or IMEMS device. The multilayered package can be formed of a LTCC or HTCC cofired ceramic material, with the integral window being simultaneously joined to the package during LTCC or HTCC processing. The microelectronic device can be flip-chip bonded so that the light-sensitive side is optically accessible through the window. The package has at least two levels of circuits for making electrical interconnections to a pair of microelectronic devices. The result is a compact, low-profile package having an integral window that is hermetically sealed to the package prior to mounting and interconnecting the microelectronic device(s).

  10. Single level microelectronic device package with an integral window

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2003-12-09

    A package with an integral window for housing a microelectronic device. The integral window is bonded directly to the package without having a separate layer of adhesive material disposed in-between the window and the package. The device can be a semiconductor chip, CCD chip, CMOS chip, VCSEL chip, laser diode, MEMS device, or IMEMS device. The package can be formed of a multilayered LTCC or HTCC cofired ceramic material, with the integral window being simultaneously joined to the package during cofiring. The microelectronic device can be flip-chip interconnected so that the light-sensitive side is optically accessible through the window. A glob-top encapsulant or protective cover can be used to protect the microelectronic device and electrical interconnections. The result is a compact, low profile package having an integral window that is hermetically sealed to the package prior to mounting and interconnecting the microelectronic device.

  11. Radiation detector and method of opaquing the mica window

    SciTech Connect

    Morris, H.; Christianson, C.

    1983-10-11

    An improved particle detection tube is disclosed including a method for applying a radiation transparent electrically non-conductive, opaque to ultraviolet light coating to the mica window of the tube. The coating reduces erroneous counts by preventing arcing between the tube anode and window. A purified mineral bituminous hydrocarbon based wax coating is applied to the mica window by cleaning the window with a hydrocarbon or chlorinated solvent rinsing with isopropyl alcohol drying the window dissolving 4 to 20 milligrams of purified bituminous hydrocarbon based wax in 1 to 2 milliliters of a hydrocarbon or chlorinated solvent on the window, and rotating the tube until the solvent evaporates to produce a film of the wax thereon.

  12. Measure Guideline: Energy-Efficient Window Performance and Selection

    SciTech Connect

    Carmody, J.; Haglund, K.

    2012-11-01

    This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all US climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The document also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well. This document is for builders, homeowners, designers and anyone making decisions about selecting energy efficient window. It is intended to complement other Building America information and efforts.

  13. Two-dimensional lattice polymers: Adaptive windows simulations

    NASA Astrophysics Data System (ADS)

    Cunha-Netto, A. G.; Dickman, Ronald; Caparica, A. A.

    2009-04-01

    We report a numerical study of self-avoiding polymers on the square lattice, including an attractive potential between nonconsecutive monomers occupying neighboring lattice sites. Using Wang-Landau sampling (WLS) with adaptive windows, we obtain the density of states for chains of up to N=300 monomers and associated thermodynamic quantities. Finite size scaling analysis yields a transition temperature of Θ=1.505(18). WLS with adaptive windows enables one to simulate accurately the low-temperature regime, which is virtually inaccessible using traditional methods. Instead of defining fixed energy windows, as in usual WLS, this method uses windows with boundaries that depend on the set of energy values on which the histogram is flat at a given stage of the simulation. Shifting the windows each time the modification factor f is reduced, we eliminate border effects that arise in simulations using fixed windows.

  14. Simulating Complex Window Systems using BSDF Data

    SciTech Connect

    Konstantoglou, Maria; Jonsson, Jacob; Lee, Eleanor

    2009-06-22

    Nowadays, virtual models are commonly used to evaluate the performance of conventional window systems. Complex fenestration systems can be difficult to simulate accurately not only because of their geometry but also because of their optical properties that scatter light in an unpredictable manner. Bi-directional Scattering Distribution Functions (BSDF) have recently been developed based on a mixture of measurements and modelling to characterize the optics of such systems. This paper describes the workflow needed to create then use these BSDF datasets in the Radiance lighting simulation software. Limited comparisons are made between visualizations produced using the standard ray-tracing method, the BSDF method, and that taken in a full-scale outdoor mockup.

  15. Porting salinas to the windows platform.

    SciTech Connect

    Reese, Garth M.; Wilson, Christopher Riley

    2006-06-01

    The ASC program has enabled significant development of high end engineering applications on massively parallel machines. There is a great benefit in providing these applications on the desktop of the analysts and designers, at least insofar as the small models may be run on these platforms, thus providing a tool set that spans the application needs. This effort documents the work of porting Salinas to the WINDOWS{trademark} platform. Selection of the tools required to compile, link, test and run Salinas in this environment is discussed. Significant problems encountered along the way are listed along with an estimation of the overall cost of the port. This report may serve as a baseline for streamlining further porting activities with other ASC codes.

  16. Isocurvature forecast in the anthropic axion window

    SciTech Connect

    Hamann, J.; Hannestad, S.; Raffelt, G.G.; Wong, Y.Y.Y. E-mail: sth@phys.au.dk E-mail: yvonne.wong@cern.ch

    2009-06-01

    We explore the cosmological sensitivity to the amplitude of isocurvature fluctuations that would be caused by axions in the ''anthropic window'' where the axion decay constant f{sub a} >> 10{sup 12} GeV and the initial misalignment angle Θ{sub i} << 1. In a minimal ΛCDM cosmology extended with subdominant scale-invariant isocurvature fluctuations, existing data constrain the isocurvature fraction to α < 0.09 at 95% C.L. If no signal shows up, Planck can improve this constraint to 0.042 while an ultimate CMB probe limited only by cosmic variance in both temperature and E-polarisation can reach 0.017, about a factor of five better than the current limit. In the parameter space of f{sub a} and H{sub I} (Hubble parameter during inflation) we identify a small region where axion detection remains within the reach of realistic cosmological probes.

  17. Low heat transfer, high strength window materials

    DOEpatents

    Berlad, Abraham L.; Salzano, Francis J.; Batey, John E.

    1978-01-01

    A multi-pane window with improved insulating qualities; comprising a plurality of transparent or translucent panes held in an essentially parallel, spaced-apart relationship by a frame. Between at least one pair of panes is a convection defeating means comprising an array of parallel slats or cells so designed as to prevent convection currents from developing in the space between the two panes. The convection defeating structures may have reflective surfaces so as to improve the collection and transmittance of the incident radiant energy. These same means may be used to control (increase or decrease) the transmittance of solar energy as well as to decouple the radiative transfer between the interior surfaces of the transparent panes.

  18. The uncrowded window of object recognition

    PubMed Central

    Pelli, Denis G; Tillman, Katharine A

    2009-01-01

    It is now emerging that vision is usually limited by object spacing rather than size. The visual system recognizes an object by detecting and then combining its features. ‘Crowding’ occurs when objects are too close together and features from several objects are combined into a jumbled percept. Here, we review the explosion of studies on crowding—in grating discrimination, letter and face recognition, visual search, selective attention, and reading—and find a universal principle, the Bouma law. The critical spacing required to prevent crowding is equal for all objects, although the effect is weaker between dissimilar objects. Furthermore, critical spacing at the cortex is independent of object position, and critical spacing at the visual field is proportional to object distance from fixation. The region where object spacing exceeds critical spacing is the ‘uncrowded window’. Observers cannot recognize objects outside of this window and its size limits the speed of reading and search. PMID:18828191

  19. Launch window definition for sky target experiments.

    NASA Technical Reports Server (NTRS)

    Michaud, N. H.

    1973-01-01

    This paper is a brief report on the computer program developed for the Extraterrestrial Physics Barium Ion Cloud (BIC) Project. The mathematical analysis developed for the program along with its programing characteristics are pointed out to show that this program is adaptable to similar sky target projects. Definite viewing constraints are specified so that the chosen ground tracking stations can photograph the behavior of the sky target after its release. Viewing factors include the illumination of the target by the sun, the relative elevation look angle to the target from each tracking station, the solar and lunar depression angles at each tracking station, and the total sky background brightness of the target relative to each tracking station. Numeric values are assigned to each factor through program input. The program output is flexible so that the results of the window calculations can be studied to the depth required.

  20. Managing coherence via put/get windows

    DOEpatents

    Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Hoenicke, Dirk; Ohmacht, Martin

    2011-01-11

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  1. Managing coherence via put/get windows

    DOEpatents

    Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Hoenicke, Dirk; Ohmacht, Martin

    2012-02-21

    A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

  2. High efficiency novel window air conditioner

    DOE PAGESBeta

    Bansal, Pradeep

    2015-01-01

    This paper presents the technical development of a high efficiency window air conditioner. In order to achieve higher energy efficiency ratio (EER), the original capacity of the R410A unit was downgraded by replacing the original compressor with a lower capacity but higher EER compressor, while all heat exchangers and the chassis from the original unit were retained. The other subsequent major modifications included – the AC fan motor being replaced with a brushless high efficiency electronically commuted motor (ECM) motor, the capillary tube being replaced with a needle valve to better control the refrigerant flow and refrigerant set points, andmore » R410A being replaced with drop-in environmentally friendly binary mixture of R32 (85% molar concentration)/R125 (15% molar concentration). All these modifications resulted in significant EER enhancement of the modified unit.« less

  3. High efficiency novel window air conditioner

    SciTech Connect

    Bansal, Pradeep

    2015-01-01

    This paper presents the technical development of a high efficiency window air conditioner. In order to achieve higher energy efficiency ratio (EER), the original capacity of the R410A unit was downgraded by replacing the original compressor with a lower capacity but higher EER compressor, while all heat exchangers and the chassis from the original unit were retained. The other subsequent major modifications included – the AC fan motor being replaced with a brushless high efficiency electronically commuted motor (ECM) motor, the capillary tube being replaced with a needle valve to better control the refrigerant flow and refrigerant set points, and R410A being replaced with drop-in environmentally friendly binary mixture of R32 (85% molar concentration)/R125 (15% molar concentration). All these modifications resulted in significant EER enhancement of the modified unit.

  4. INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS

    SciTech Connect

    Michael Arney, Ph.D.

    2002-12-31

    The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

  5. MAVIS III -- A Windows 95/NT Upgrade

    SciTech Connect

    Hardwick, M.F.

    1997-12-01

    MAVIS (Modeling and Analysis of Explosive Valve Interactions) is a computer program that simulates operation of explosively actuated valve. MAVIS was originally written in Fortran in the mid 1970`s and was primarily run on the Sandia Vax computers in use through the early 1990`s. During the mid to late 1980`s MAVIS was upgraded to include the effects of plastic deformation and it became MAVIS II. When the Vax computers were retired, the Gas Transfer System (GTS) Development Department ported the code to the Macintosh and PC platforms, where it ran as a simple console application. All graphical output was lost during these ports. GTS code developers recently completed an upgrade that provides a Windows 95/NT MAVIS application and restores all of the original graphical output. This upgrade is called MAVIS III version 1.0. This report serves both as a user`s manual for MAVIS III v 1.0 and as a general software development reference.

  6. THE METABOLOMIC WINDOW INTO HEPATOBILIARY DISEASE

    PubMed Central

    Beyoğlu, Diren; Idle, Jeffrey R.

    2014-01-01

    Summary The emergent discipline of metabolomics has attracted considerable research effort in hepatology. Here we review the metabolomic data for nonalcoholic fatty liver disease (NAFLD), nonalcoholic steatohepatitis (NASH), cirrhosis, hepatocellular carcinoma (HCC), cholangiocarcinoma (CCA), alcoholic liver disease (ALD), hepatitis B and C, cholecystitis, cholestasis, liver transplantation and acute hepatotoxicity in animal models. A metabolomic window has permitted a view into the changing biochemistry occurring in the transitional phases between a healthy liver and hepatocellular carcinoma or cholangiocarcinoma. Whether provoked by obesity and diabetes, alcohol use or oncogenic viruses, the liver develops a core metabolomic phenotype (CMP) that involves dysregulation of bile acid and phospholipid homeostasis. The CMP commences at the transition between the healthy liver (Phase 0) and NAFLD/NASH, ALD or viral hepatitis (Phase 1). This CMP is maintained in the presence or absence of cirrhosis (Phase 2) and whether or not either HCC or CCA (Phase 3) develop. Inflammatory signalling in the liver triggers the appearance of the CMP. Many other metabolomic markers distinguish between Phases 0, 1, 2 and 3. A metabolic remodelling in HCC has been described but metabolomic data from all four Phases demonstrate that the Warburg shift from mitochondrial respiration to cytosolic glycolysis foreshadows HCC and may occur as early as Phase 1. The metabolic remodelling also involves an upregulation of fatty acid β-oxidation, also beginning in Phase 1. The storage of triglycerides in fatty liver provides high energy-yielding substrates for Phases 2 and 3 of liver pathology. The metabolomic window into hepatobiliary disease sheds new light on the systems pathology of the liver. PMID:23714158

  7. Windows on the axion. [quantum chromodynamics (QCD)

    NASA Technical Reports Server (NTRS)

    Turner, Michael S.

    1989-01-01

    Peccei-Quinn symmetry with attendant axion is a most compelling, and perhaps the most minimal, extension of the standard model, as it provides a very elegant solution to the nagging strong CP-problem associated with the theta vacuum structure of QCD. However, particle physics gives little guidance as to the axion mass; a priori, the plausible values span the range: 10(-12)eV is approx. less than m(a) which is approx. less than 10(6)eV, some 18 orders-of-magnitude. Laboratory experiments have excluded masses greater than 10(4)eV, leaving unprobed some 16 orders-of-magnitude. Axions have a host of interesting astrophysical and cosmological effects, including, modifying the evolution of stars of all types (our sun, red giants, white dwarfs, and neutron stars), contributing significantly to the mass density of the Universe today, and producting detectable line radiation through the decays of relic axions. Consideration of these effects has probed 14 orders-of-magnitude in axion mass, and has left open only two windows for further exploration: 10(-6)eV is approx. less than m(a) is approx. less than 10(-3)eV and 1eV is approx. less than m(a) is approx. less than 5eV (hadronic axions only). Both these windows are accessible to experiment, and a variety of very interesting experiments, all of which involve heavenly axions, are being planned or are underway.

  8. Adaptive explanations for sensitive windows in development

    PubMed Central

    2015-01-01

    Development in many organisms appears to show evidence of sensitive windows—periods or stages in ontogeny in which individual experience has a particularly strong influence on the phenotype (compared to other periods or stages). Despite great interest in sensitive windows from both fundamental and applied perspectives, the functional (adaptive) reasons why they have evolved are unclear. Here we outline a conceptual framework for understanding when natural selection should favour changes in plasticity across development. Our approach builds on previous theory on the evolution of phenotypic plasticity, which relates individual and population differences in plasticity to two factors: the degree of uncertainty about the environmental conditions and the extent to which experiences during development (‘cues’) provide information about those conditions. We argue that systematic variation in these two factors often occurs within the lifetime of a single individual, which will select for developmental changes in plasticity. Of central importance is how informational properties of the environment interact with the life history of the organism. Phenotypes may be more or less sensitive to environmental cues at different points in development because of systematic changes in (i) the frequency of cues, (ii) the informativeness of cues, (iii) the fitness benefits of information and/or (iv) the constraints on plasticity. In relatively stable environments, a sensible null expectation is that plasticity will gradually decline with age as the developing individual gathers information. We review recent models on the evolution of developmental changes in plasticity and explain how they fit into our conceptual framework. Our aim is to encourage an adaptive perspective on sensitive windows in development. PMID:26816521

  9. Biaxial flexural strength of optical window materials

    NASA Astrophysics Data System (ADS)

    Klein, Claude A.

    2009-10-01

    The design of high-energy laser windows critically depends on the availability of appropriate numbers for the allowable tensile stress. Relying on a "modulus of rupture" in conjunction with a "safety factor" usually results in overestimating the required thickness, which degrades the optical performance. The primary purpose of this paper is to clarify issues relating to Weibull's theory of brittle fracture and make use of the theory to assess the results of equibiaxial flexure testing that was carried out on laser-window material candidates. Specifically, we describe the failure-probability distribution in terms of the characteristic strength σC--i.e., the effective strength of a uniformly stressed 1-cm2 area---and the shape parameter m, which reflects the dispersion of surface-flaw sizes. A statistical analysis of flexural strength data thus amounts to obtaining the parameters σC and m, which is best done by directly fitting estimated cumulative failure probabilities to the appropriate expression derived from Weibull's theory. In this light, we demonstrate that (a) at the 1% failure-probability level, fusion-cast CaF2 and OxyFluoride Glass perform poorly compared to CVD-ZnSe; (b) available data for fused SiO2 and sapphire confirm the area-scaling principle, thus validating Weibull's theory; and (c) compressive coatings enhance the characteristic strength but degrade the shape parameter, which mitigates their benefit. In Appendix, it is shown that four-point bending data for fusion-cast CaF2 do not obey a simple two-parameter model but are indicative of a bimodal surface-flaw population.

  10. WORM - WINDOWED OBSERVATION OF RELATIVE MOTION

    NASA Technical Reports Server (NTRS)

    Bauer, F.

    1994-01-01

    The Windowed Observation of Relative Motion, WORM, program is primarily intended for the generation of simple X-Y plots from data created by other programs. It allows the user to label, zoom, and change the scale of various plots. Three dimensional contour and line plots are provided, although with more limited capabilities. The input data can be in binary or ASCII format, although all data must be in the same format. A great deal of control over the details of the plot is provided, such as gridding, size of tick marks, colors, log/semilog capability, time tagging, and multiple and phase plane plots. Many color and monochrome graphics terminals and hard copy printer/plotters are supported. The WORM executive commands, menu selections and macro files can be used to develop plots and tabular data, query the WORM Help library, retrieve data from input files, and invoke VAX DCL commands. WORM generated plots are displayed on local graphics terminals and can be copied using standard hard copy capabilities. Some of the graphics features of WORM include: zooming and dezooming various portions of the plot; plot documentation including curve labeling and function listing; multiple curves on the same plot; windowing of multiple plots and insets of the same plot; displaying a specific on a curve; and spinning the curve left, right, up, and down. WORM is written in PASCAL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.7 with a virtual memory requirement of approximately 392K of 8 bit bytes. It uses the QPLOT device independent graphics library included with WORM. It was developed in 1988.

  11. Rose windows and other details. San Bernardino Valley Union Junior ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Rose windows and other details. San Bernardino Valley Union Junior College, Auditorium Building. Rose window; front windows; drinking fountain alcove; proscenium arch; stage door. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 12, job no. 692. Various scales. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  12. Stand-alone photovoltaic (PV) powered electrochromic window

    DOEpatents

    Benson, D.K.; Crandall, R.S.; Deb, S.K.; Stone, J.L.

    1995-01-24

    A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired. 11 figures.

  13. Stand-alone photovoltaic (PV) powered electrochromic window

    DOEpatents

    Benson, David K.; Crandall, Richard S.; Deb, Satyendra K.; Stone, Jack L.

    1995-01-01

    A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired.

  14. Detail of arched windows on north elevation; camera facing southwest. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of arched windows on north elevation; camera facing southwest. - Mare Island Naval Shipyard, Smithery, California Avenue, west side at California Avenue & Eighth Street, Vallejo, Solano County, CA

  15. Cooled window for X-rays or charged particles

    DOEpatents

    Logan, Clinton M.

    1996-01-01

    A window that provides good structural integrity and a very high capacity for removal of the heat deposited by x-rays, electrons, or ions, with minimum attenuation of the desired beam. The window is cooled by providing microchannels therein through which a coolant is pumped. For example, the window may be made of silicon with etched microchannels therein and covered by a silicon member. A window made of silicon with a total thickness of 520 .mu.m transmits 96% of the x-rays at an energy of 60 keV, and the transmission is higher than 90% for higher energy photons.

  16. Cooled window for X-rays or charged particles

    DOEpatents

    Logan, C.M.

    1996-04-16

    A window is disclosed that provides good structural integrity and a very high capacity for removal of the heat deposited by x-rays, electrons, or ions, with minimum attenuation of the desired beam. The window is cooled by providing microchannels therein through which a coolant is pumped. For example, the window may be made of silicon with etched microchannels therein and covered by a silicon member. A window made of silicon with a total thickness of 520 {micro}m transmits 96% of the x-rays at an energy of 60 keV, and the transmission is higher than 90% for higher energy photons. 1 fig.

  17. DETAIL VIEW, SOUTH PORTICO, CENTER DOOR OPENING CONTAINING FRENCH WINDOWS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, SOUTH PORTICO, CENTER DOOR OPENING CONTAINING FRENCH WINDOWS. (NOTE THE INCISED STUCCO MIMICKING ASHLAR STONE COURSING - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  18. Marguerite Arnet Residence, exterior window detail, looking north. Adam ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Marguerite Arnet Residence, exterior window detail, looking north. - Adam & Bessie Arnet Homestead, Marguerite Arnet Residence, 560 feet northeast of Adam & Bessie Arnet Residence, Model, Las Animas County, CO

  19. Two-Band, Low-Loss Microwave Window

    NASA Technical Reports Server (NTRS)

    Britcliffe, Michael; Franco, Manuel

    2007-01-01

    A window for a high-sensitivity microwave receiving system allows microwave radiation to pass through to a cryogenically cooled microwave feed system in a vacuum chamber, while keeping ambient air out of the chamber and helping to keep the interior of the chamber cold. The microwave feed system comprises a feed horn and a low-noise amplifier, both of which are required to be cooled to a temperature of 15 K during operation. The window is designed to exhibit very little microwave attenuation in two frequency bands: 8 to 9 GHz and 30 to 40 GHz. The window is 15 cm in diameter. It includes three layers (see figure): 1) The outer layer is made of a poly(tetrafluoroethylene) film 0.025 mm thick. This layer serves primarily to reflect and absorb solar ultraviolet radiation to prolong the life of the underlying main window layer, which is made of a polyimide that becomes weakened when exposed to ultraviolet. The poly(tetrafluoroethylene) layer also protects the main window layer against abrasion. Moreover, the inherent hydrophobicity of poly(tetrafluoroethylene) helps to prevent the highly undesirable accumulation of water on the outer surface. 2) The polyimide main window layer is 0.08 mm thick. This layer provides the vacuum seal for the window. 3) A 20-mm-thick layer of ethylene/ propylene copolymer foam underlies the main polyimide window layer. This foam layer acts partly as a thermal insulator: it limits radiational heating of the microwave feed horn and, concomitantly, limits radiational cooling of the window. This layer has high compressive strength and provides some mechanical support for the main window layer, reducing the strength required of the main window layer. The ethylene/propylene copolymer foam layer is attached to an aluminum window ring by means of epoxy. The outer poly(tetrafluoroethylene) film and the main polyimide window layer are sandwiched together and pressed against the window ring by use of a bolted clamp ring. The window has been found to

  20. 6. DETAIL OF CORNICE, ROOF AND WINDOWS, VIEW TO SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. DETAIL OF CORNICE, ROOF AND WINDOWS, VIEW TO SOUTHEAST - Providence Sewage Treatment System, Ernest Street Pumping Station, Boiler House, Ernest Street & Allens Avenue, Providence, Providence County, RI

  1. 12. DETAIL, TYPICAL WINDOW BAY Delaware, Lackawanna & Western ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. DETAIL, TYPICAL WINDOW BAY - Delaware, Lackawanna & Western Railroad Freight & Rail Yard, Multiple Unit Light Inspection Shed, New Jersey Transit Hoboken Terminal Rail Yard, Hoboken, Hudson County, NJ

  2. TENANT HOUSE, WINDOW DETAIL, NORTH FRONT, LOOKING SOUTH Irvine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TENANT HOUSE, WINDOW DETAIL, NORTH FRONT, LOOKING SOUTH - Irvine Ranch Agricultural Headquarters, Carillo Tenant House, Southwest of Intersection of San Diego & Santa Ana Freeways, Irvine, Orange County, CA

  3. Windows Program For Driving The TDU-850 Printer

    NASA Technical Reports Server (NTRS)

    Parrish, Brett T.

    1995-01-01

    Program provides WYSIWYG compatibility between video display and printout. PDW is Microsoft Windows printer-driver computer program for use with Raytheon TDU-850 printer. Provides previously unavailable linkage between printer and IBM PC-compatible computers running Microsoft Windows. Enhances capabilities of Raytheon TDU-850 hardcopier by emulating all textual and graphical features normally supported by laser/ink-jet printers and makes printer compatible with any Microsoft Windows application. Also provides capabilities not found in laser/ink-jet printer drivers by providing certain Windows applications with ability to render high quality, true gray-scale photographic hardcopy on TDU-850. Written in C language.

  4. 7. DETAIL, NORTH FRONT, EASTERN PORTION OF MAIN BLOCK, WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL, NORTH FRONT, EASTERN PORTION OF MAIN BLOCK, WINDOWS - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  5. 7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH SIDE, NEAR WEST END. - United Engineering Company Shipyard, Inspection & Repair Shops, 2900 Main Street, Alameda, Alameda County, CA

  6. Detail of window on south elevation; camera facing north. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of window on south elevation; camera facing north. - Mare Island Naval Shipyard, Ordnance Warehouse, Blake Avenue, northeast corner of Blake Avenue & Railroad Avenue, Vallejo, Solano County, CA

  7. 7. SOUTHEAST REAR DETAIL, SHOWING WINDOWS. VIEW TO NORTHWEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. SOUTHEAST REAR DETAIL, SHOWING WINDOWS. VIEW TO NORTHWEST. - Commercial & Industrial Buildings, Key City Electric Street Railroad, Powerhouse & Storage Barn, Eighth & Washington Streets, Dubuque, Dubuque County, IA

  8. Vacuum window glazings for energy-efficient buildings

    SciTech Connect

    Benson, D.K.; Smith, L.K.; Tracy, C.E.; Potter, T.; Christensen, C. ); Soule, D.E. )

    1990-05-01

    The technical feasibility of a patented, laser-welded, evacuated insulating window was studied. The window has two edge-sealed sheets of glass separated by 0.5-mm glass spheres spaced 30 mm apart in a regular array. A highly insulating frame is required and several designs were analyzed. The vacuum window's combination of high solar transmittance and low thermal conductance makes it superior to many other windows in cold climates. In the US Pacific Northwest, the vacuum window could save about 6 MJ of heating energy annually per square meter of window in comparison to conventional, double-glazed windows. A large, vacuum laser-welding facility was designed and installed to conduct glass welding experiments and to fabricate full-sized vacuum windows. Experiments confirmed the feasibility of laser-sealing glass in vacuum but identified two difficulties. Under some circumstances, bubbles of dissolved gases form during welding and weaken the seal. Glass also vaporizes and contaminates the laser beam steering mirror. A novel moving metal foil mirror was developed to circumvent the contamination problem, but it has not yet been used to complete welding experiments and fabricate full-sized vacuum windows. 63 refs., 53 figs., 19 tabs.

  9. Automatic window size selection in Windowed Fourier Transform for 3D reconstruction using adapted mother wavelets

    NASA Astrophysics Data System (ADS)

    Fernandez, Sergio; Gdeisat, Munther A.; Salvi, Joaquim; Burton, David

    2011-06-01

    Fringe pattern analysis in coded structured light constitutes an active field of research. Techniques based on first projecting a sinusoidal pattern and then recovering the phase deviation permit the computation of the phase map and its corresponding depth map, leading to a dense acquisition of the measuring object. Among these techniques, the ones based on time-frequency analysis permit to extract the depth map from a single image, thus having potential applications measuring moving objects. The main techniques are Fourier Transform (FT), Windowed Fourier Transform (WFT) and Wavelet Transform (WT). This paper first analyzes the pros and cons of these three techniques, then a new algorithm for the automatic selection of the window size in WFT is proposed. This algorithm is compared to the traditional WT using adapted mother wavelet signals both with simulated and real objects, showing the performance results for quantitative and qualitative evaluations of the new method.

  10. Structural evolution of an antiformal window: the Scheiblingkirchen Window (Eastern Alps, Austria)

    NASA Astrophysics Data System (ADS)

    Willingshofer, Ernst; Neubauer, Franz

    2002-10-01

    The Scheiblingkirchen window, a Lower Austroalpine tectonic window at the eastern margin of the Eastern Alps (Austria) was formed during Late Cretaceous continent-continent collision. Structural investigations including structural mapping, microstructural studies and texture analysis revealed a decompression-related three-stage tectonic history of Lower Austroalpine units during the formation of the Scheiblingkirchen window. (1) Intra-Lower Austroalpine nappe stacking was by top-to-the-N out-of-sequence thrusting of the Kirchberg fold nappe over the Wechsel nappe under lower greenschist facies metamorphic conditions. The structural expression of the stacking event (D 1) comprises a penetrative foliation containing a N-S trending stretching lineation, isoclinal recumbent folds trending subparallel to the stretching lineation and ultramylonites. Quartz and calcite microstructures indicate that dynamic recrystallization processes accompanied deformation. Their commonly moderately developed lattice preferred orientation record dominant slip on the prism and rhomb planes parallel to < a>. (2) Subsequent exhumation of previously stacked rocks is related to the formation of foliation-parallel mylonitic shear zones within an E-W extensional regime (D 2). Microstructures and textures suggest similar deformation temperatures during thrusting and extension. (3) A superimposed phase of NW-SE oriented horizontal shortening (D 3) was accommodated by large- and small-scale upright folding of the area around NE-SW trending axes and by backthrusting leading to the antiformal doming of the Scheiblingkirchen Window. Subsequent subvertical flattening resulting from the shortening phase led to the formation of NE-SW trending, outcrop-scale open recumbent folds. Low temperature deformation conditions as inferred from the low degree of recrystallization of quartz and calcite aggregates and the dominance of glide on the basal planes point to a cooling-related deformation event.

  11. Aerodynamic window for high precision laser drilling

    NASA Astrophysics Data System (ADS)

    Sommer, Steffen; Dausinger, Friedrich; Berger, Peter; Hügel, Helmuth

    2007-05-01

    High precision laser drilling is getting more and more interesting for industry. Main applications for such holes are vaporising and injection nozzles. To enhance quality, the energy deposition has to be accurately defined by reducing the pulse duration and thereby reducing the amount of disturbing melting layer. In addition, an appropriate processing technology, for example the helical drilling, yields holes in steel at 1 mm thickness and diameters about 100 μm with correct roundness and thin recast layers. However, the processing times are still not short enough for industrial use. Experiments have shown that the reduction of the atmospheric pressure down to 100 hPa enhances the achievable quality and efficiency, but the use of vacuum chambers in industrial processes is normally quite slow and thus expensive. The possibility of a very fast evacuation is given by the use of an aerodynamic window, which produces the pressure reduction by virtue of its fluid dynamic features. This element, based on a potential vortex, was developed and patented as out-coupling window for high power CO II lasers by IFSW 1, 2, 3. It has excellent tightness and transmission properties, and a beam deflection is not detectable. The working medium is compressed air, only. For the use as vacuum element for laser drilling, several geometrical modifications had to be realized. The prototype is small enough to be integrated in a micromachining station and has a low gas flow. During the laser pulse, which is focussed through the potential flow, a very high fluence is reached, but the measurements have not shown any beam deflection or focal shifting. The evacuation time is below 300 ms so that material treatment with changing ambient pressure is possible, too. Experimental results have proven the positive effect of the reduced ambient pressure on the drilling process for the regime of nano- and picosecond laser pulses. Plasma effects are reduced and, because of the less absorption, the

  12. Improvements in large window and optics production

    NASA Astrophysics Data System (ADS)

    Hallock, Bob; Messner, Bill; Hall, Chris; Supranowitz, Chris

    2007-04-01

    Fabrication of large optics has been a topic of discussion for decades. As early as the late 1980s, computer-controlled equipment has been used to semi-deterministically correct the figure error of large optics over a number of process iterations. Magnetorheological Finishing, MRF®, was developed and commercialized in the late 1990's to predictably and reliably allow the user to achieve deterministic results on a variety of optical glasses, ceramics and other common optical materials. Large and small optics such as primary mirrors, conformal optics and off-axis components are efficiently fabricated using this approach. More recently, specific processes, MR Fluids and equipment have been developed and implemented to enhance results when finishing large aperture sapphire windows. MRF, by virtue of its unique removal process, overcomes many of the drawbacks of a conventional polishing process. For example, lightweighted optics often exhibit a quilted pattern coincident with their pocket cell structure following conventional pad-based polishing. MRF does not induce mid-frequency errors and is capable of removing existing quilt patterns. Further, odd aperture shapes and part geometries which can represent significant challenges to conventional polish processing are simply and easily corrected with MRF tools. Similarly, aspheric optics which can often present multiple obstacles-particularly when lightweighted and off-axis-typically have a departure from best-fit sphere that is not well matched with to static pad-based polishing tools resulting in pad misfit and associated variations in removal. The conformal subaperture polishing tool inherent to the QED process works as well on typical circular apertures as it does on irregular shapes such as rectangles, petals and trapezoids for example and matches the surface perfectly at all points. Flats, spheres, aspheres and off-axis sections are easily corrected. The schedule uncertainties driven by edge roll and edge control

  13. 29. May 1985. DETAIL OF INSCRIPTION IN WINDOW PANE IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. May 1985. DETAIL OF INSCRIPTION IN WINDOW PANE IN SITTING ROOM (window is immediately south of front, or east, doors; inscription reads: 'Another May new buds new flowers Ah why has happiness no second spring' (author and date undetermined) - Borough House, West Side State Route 261, about .1 mile south side of junction with old Garners Ferry Road, Stateburg, Sumter County, SC

  14. 16. Detail, northeast facade, operator's bow window and tower; note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Detail, northeast facade, operator's bow window and tower; note condition of slates on tower skirt roof, missing section of gutter at left side of skirt roof, missing window panes; note also knee braces carried on masonry ancons; view to southwest, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

  15. 46 CFR 127.440 - Operability of window coverings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Operability of window coverings. 127.440 Section 127.440 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Construction of Windows, Visibility, and Operability of Coverings § 127.440 Operability of...

  16. 46 CFR 127.440 - Operability of window coverings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Operability of window coverings. 127.440 Section 127.440 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS CONSTRUCTION AND ARRANGEMENTS Construction of Windows, Visibility, and Operability of Coverings § 127.440 Operability of...

  17. FACILITY 713, LIVING ROOM SHOWING DIAMONDPANED WINDOWS FLANKING THE FIREPLACE, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FACILITY 713, LIVING ROOM SHOWING DIAMOND-PANED WINDOWS FLANKING THE FIREPLACE, AND LEADED-GLASS WINDOWS IN DINING ROOM IN RIGHT BACKGROUND, VIEW FACING SOUTHEAST. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI

  18. 49 CFR 238.113 - Emergency window exits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Emergency window exits. 238.113 Section 238.113 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.113 Emergency window exits....

  19. 49 CFR 238.114 - Rescue access windows.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rescue access windows. 238.114 Section 238.114 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.114 Rescue access windows....

  20. DETAIL VIEW, CENTER FIRSTFLOOR WINDOW IN WEST WALL. ORIGINALLY, THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, CENTER FIRST-FLOOR WINDOW IN WEST WALL. ORIGINALLY, THE EXTERIOR OF THE HOUSE WAS, AT THE VERY LEAST, LIMED, AND POSSIBLY STUCCOED. THUS, THE CONTRAST BETWEEN THE NEATLY CRAFTED BRICK WINDOW SURROUNDS AND THE STONE WALL WOULD HAVE BEEN REDUCED - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  1. Solving Math Problems. Windows on Literacy: Language, Literacy & Vocabulary

    ERIC Educational Resources Information Center

    Roberts, Jason

    2006-01-01

    This book is part of the "Windows on Literacy: Language, Literacy & Vocabulary" program and shows students ways to solve problems, including drawing a picture and using a calculator. The suggested grade range is K-3; the guided reading level is N-P; the basal results level is Grade 2-Grade 3; and the Windows on Literacy Stage is Fluent Plus…

  2. Interior of processing room showing the passthrough window from the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of processing room showing the pass-through window from the shucking room. Tally board on the wall was used to keep track of the output of each shucker. Skimming table for rinsing the oyster meat is located under the pass-through window. - J.C. Lore Oyster House, 14430 Solomons Island Road, Solomons, Calvert County, MD

  3. Analysis of distributed cooled high power millimeter wave windows

    SciTech Connect

    Nelson, S.D.; Caplan, M.; Reitter, T.A.

    1995-09-09

    The sectional high-frequency (100--170 GHz) distributed cooled window has been investigated both electromagnetically and thermally previously using computational electromagnetics (EM) and thermal codes. Recent data describes the relationship to some experimental data for the window. Results are presented for time domain CW EM analyses and CW thermal and stress calculations.

  4. 14 CFR 25.775 - Windshields and windows.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Windshields and windows. 25.775 Section 25.775 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Personnel and Cargo Accommodations § 25.775 Windshields and windows....

  5. Measure Guideline. Wood Window Repair, Rehabilitation, and Replacement

    SciTech Connect

    Baker, P.; Eng, P.

    2012-12-01

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  6. 49 CFR 238.113 - Emergency window exits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Emergency window exits. 238.113 Section 238.113..., electrical locker, or kitchen); and (B) There are no more than eight seats in the seating area. (4) Cars with... have at least one emergency window exit in each such compartment. For purposes of this paragraph...

  7. 49 CFR 238.113 - Emergency window exits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Emergency window exits. 238.113 Section 238.113..., electrical locker, or kitchen); and (B) There are no more than eight seats in the seating area. (4) Cars with... have at least one emergency window exit in each such compartment. For purposes of this paragraph...

  8. Adjusting the detection window to improve the soliton communication system

    NASA Astrophysics Data System (ADS)

    Chi, Sien; Kao, Chuan-Yuan; Dung, Jeng-Cherng; Wen, Senfar

    2000-12-01

    The improvements of the Q factors of 10-Gb/s soliton systems detected by adjusting detection window are studied. We have found that the optimal width of the detection window depends on the noise-induced timing jitter, noise-induced soliton energy fluctuation, amplifier noise, dispersive wave, and soliton pulse width.

  9. InP solar cell with window layer

    NASA Technical Reports Server (NTRS)

    Jain, Raj K. (Inventor); Landis, Geoffrey A. (Inventor)

    1994-01-01

    The invention features a thin light transmissive layer of the ternary semiconductor indium aluminum arsenide (InAlAs) as a front surface passivation or 'window' layer for p-on-n InP solar cells. The window layers of the invention effectively reduce front surface recombination of the object semiconductors thereby increasing the efficiency of the cells.

  10. 33. DETAIL VIEW OF THE WEST WINDOW AT THE FIRST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. DETAIL VIEW OF THE WEST WINDOW AT THE FIRST FLOOR LEVEL OF THE TOWER (NOTE LEVEL OF ARCHITECTURAL FINISH SEEN IN THE ROUNDHEADED WINDOW WITH ITS ROUND-ARCHED, BROWNSTONE HOOD THAT TERMINATES IN BRACKETS AS WELL AS IN THE STRINGCOURSE AND IN BRICK INSET-PANELING BELOW THE BROWNSTONE SILL) - Kenworthy Hall, State Highway 14 (Greensboro Road), Marion, Perry County, AL

  11. Modeling Windows in Energy Plus with Simple Performance Indices

    SciTech Connect

    Arasteh, Dariush; Kohler, Christian; Griffith, Brent

    2009-10-12

    The building energy simulation program, Energy Plus (E+), cannot use standard window performance indices (U, SHGC, VT) to model window energy impacts. Rather, E+ uses more accurate methods which require a physical description of the window. E+ needs to be able to accept U and SHGC indices as window descriptors because, often, these are all that is known about a window and because building codes, standards, and voluntary programs are developed using these terms. This paper outlines a procedure, developed for E+, which will allow it to use standard window performance indices to model window energy impacts. In this 'Block' model, a given U, SHGC, VT are mapped to the properties of a fictitious 'layer' in E+. For thermal conductance calculations, the 'Block' functions as a single solid layer. For solar optical calculations, the model begins by defining a solar transmittance (Ts) at normal incidence based on the SHGC. For properties at non-normal incidence angles, the 'Block' takes on the angular properties of multiple glazing layers; the number and type of layers defined by the U and SHGC. While this procedure is specific to E+, parts of it may have applicability to other window/building simulation programs.

  12. Radiation-transparent windows, method for imaging fluid transfers

    DOEpatents

    Shu, Deming; Wang, Jin

    2011-07-26

    A thin, x-ray-transparent window system for environmental chambers involving pneumatic pressures above 40 bar is presented. The window allows for x-ray access to such phenomena as fuel sprays injected into a pressurized chamber that mimics realistic internal combustion engine cylinder operating conditions.

  13. Field repair of AH-16 helicopter window cutting assemblies

    NASA Technical Reports Server (NTRS)

    Bement, L. J.

    1984-01-01

    The U.S. Army uses explosively actuated window cutting assemblies to provide emergency crew ground egress. Gaps between the system's explosive cords and acrylic windows caused a concern about functional reliability for a fleet of several hundred aircraft. A field repair method, using room temperature vulcanizing silicone compound (RTV), was developed and demonstrated to fill gaps as large as 0.250 inch.

  14. High-Reliability Waveguide Vacuum/Pressure Window

    NASA Technical Reports Server (NTRS)

    Britcliffe, Michael J.; Hanson, Theodore R.; Long, Ezra M.; Montanez, Steven

    2013-01-01

    The NASA Deep Space Network (DSN) uses commercial waveguide windows on the output waveguide of Ka-band (32 GHz) low-noise amplifiers. Mechanical failure of these windows resulted in an unacceptable loss in tracking time. To address this issue, a new Ka-band WR-28 waveguide window has been designed, fabricated, and tested. The window uses a slab of low-loss, low-dielectric constant foam that is bonded into a 1/2-wave-thick waveguide/flange. The foam is a commercially available, rigid, closed-cell polymethacrylimide. It has excellent electrical properties with a dielectric constant of 1.04, and a loss tangent of 0.01. It is relatively strong with a tensile strength of 1 MPa. The material is virtually impermeable to helium. The finished window exhibits a leak rate of less than 3x10(exp -3)cu cm/s with helium. The material is also chemically resistant and can be cleaned with acetone. The window is constructed by fabricating a window body by brazing a short length of WR-28 copper waveguide into a standard rectangular flange, and machining the resulting part to a thickness of 4.6 mm. The foam is machined to a rectangular shape with a dimension of 7.06x3.53 mm. The foam is bonded into the body with a two-part epoxy. After curing, the excess glue and foam are knife-trimmed by hand. The finished window has a loss of less than 0.08 dB (2%) and a return loss of greater than 25 dB at 32 GHz. This meets the requirements for the DSN application. The window is usable for most applications over the entire 26-to-40-GHz waveguide band. The window return loss can be tuned to a required frequency by var y in g the thickness of the window slightly. Most standard waveguide windows use a thin membrane of material bonded into a recess in a waveguide flange, or sandwiched between two flanges with a polymer seal. Designs using the recessed window are prone to mechanical failure over time due to constraints on the dimensions of the recess that allow the bond to fail. Designs using the

  15. Accelerated Durability Testing of Electrochromic Windows

    SciTech Connect

    Tracy, C. E.; Zhang, J. G.; Benson, D. K.; Czanderna, A. W.; Deb, S. K.

    1998-12-29

    Prototype electrochromic windows made by several different U.S. companies have been tested in our laboratory for their long-term durability. Samples were subjected to alternate coloring and bleaching voltage cycles while exposed to simulated on 1-sun irradiance in a temperature-controlled environmental chamber with low relative humidity. The samples inside the chamber were tested under a matrix of different conditions. These conditions include: cycling at different temperatures (65 C, 85 C, and 107 C) under the irradiance, cycling versus no-cycling under the same irradiance and temperature, testing with different voltage waveforms and duty cycles with the same irradiance and temperature, cycling under various filtered irradiance intensities, and simple thermal exposure with no irradiance or cycling. The electro-optical characteristics of the samples were measured between 350 and 1,100 nm every 4,000 cycles for up to 20,000 cycles. Photographs of the samples were taken periodically wi th a digital camera to record cosmetic defects, the extent of residual coloration, and overall coloration and bleaching uniformity of the samples. Our results indicate that the most important cause of degradation is the combination of continuous cycling, elevated temperature, and irradiance. The relative importance of these variables, when considered synergistically or separately, depends on the particular device materials and design.

  16. Temporal Integration Windows for Naturalistic Visual Sequences

    PubMed Central

    Fairhall, Scott L.; Albi, Angela; Melcher, David

    2014-01-01

    There is increasing evidence that the brain possesses mechanisms to integrate incoming sensory information as it unfolds over time-periods of 2–3 seconds. The ubiquity of this mechanism across modalities, tasks, perception and production has led to the proposal that it may underlie our experience of the subjective present. A critical test of this claim is that this phenomenon should be apparent in naturalistic visual experiences. We tested this using movie-clips as a surrogate for our day-to-day experience, temporally scrambling them to require (re-) integration within and beyond the hypothesized 2–3 second interval. Two independent experiments demonstrate a step-wise increase in the difficulty to follow stimuli at the hypothesized 2–3 second scrambling condition. Moreover, only this difference could not be accounted for by low-level visual properties. This provides the first evidence that this 2–3 second integration window extends to complex, naturalistic visual sequences more consistent with our experience of the subjective present. PMID:25010517

  17. Dynamics of window glass fracture in explosions

    SciTech Connect

    Beauchamp, E.K.; Matalucci, R.V.

    1998-05-01

    An exploratory study was conducted under the Architectural Surety Program to examine the possibility of modifying fracture of glass in the shock-wave environment associated with terrorist bombings. The intent was to explore strategies to reduce the number and severity of injuries resulting from those attacks. The study consisted of a series of three experiments at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology at Socorro, NM, in which annealed and tempered glass sheets were exposed to blast waves at several different levels of overpressure and specific impulse. A preliminary assessment of the response of tempered glass to the blast environment suggested that inducing early failure would result in lowering fragment velocity as well as reducing the loading from the window to the structure. To test that possibility, two different and novel procedures (indentation flaws and spot annealing) were used to reduce the failure strength of the tempered glass while maintaining its ability to fracture into small cube-shaped fragments. Each experiment involved a comparison of the performance of four sheets of glass with different treatments.

  18. Orbiter Window Hypervelocity Impact Strength Evaluation

    NASA Technical Reports Server (NTRS)

    Estes, Lynda R.

    2011-01-01

    When the Space Shuttle Orbiter incurs damage on its windowpane during flight from particles traveling at hypervelocity speeds, it produces a distinctive damage that reduces the overall strength of the pane. This damage has the potential to increase the risk associated with a safe return to Earth. Engineers at Boeing and NASA/JSC are called to Mission Control to evaluate the damage and provide an assessment on the risk to the crew. Historically, damages like these were categorized as "accepted risk" associated with manned spaceflight, and as long as the glass was intact, engineers gave a "go ahead" for entry for the Orbiter. Since the Columbia accident, managers have given more scrutiny to these assessments, and this has caused the Orbiter window engineers to capitalize on new methods of assessments for these damages. This presentation will describe the original methodology that was used to asses the damages, and introduce a philosophy new to the Shuttle program for assessing structural damage, reliability/risk-based engineering. The presentation will also present a new, recently adopted method for assessing the damage and providing management with a reasonable assessment on the realities of the risk to the crew and vehicle for return.

  19. Context Switching with Multiple Register Windows: A RISC Performance Study

    NASA Technical Reports Server (NTRS)

    Konsek, Marion B.; Reed, Daniel A.; Watcharawittayakul, Wittaya

    1987-01-01

    Although previous studies have shown that a large file of overlapping register windows can greatly reduce procedure call/return overhead, the effects of register windows in a multiprogramming environment are poorly understood. This paper investigates the performance of multiprogrammed, reduced instruction set computers (RISCs) as a function of window management strategy. Using an analytic model that reflects context switch and procedure call overheads, we analyze the performance of simple, linearly self-recursive programs. For more complex programs, we present the results of a simulation study. These studies show that a simple strategy that saves all windows prior to a context switch, but restores only a single window following a context switch, performs near optimally.

  20. Seeker multispectral atmospheric reentry technology (SMART) window development

    NASA Astrophysics Data System (ADS)

    Gal, G.; Herman, B.; Morrow, H.; Anderson, W.; Hsu, I.; Stubbs, D.

    1992-05-01

    Seeker Multispectral Atmospheric Reentry Technology (SMART) window development is concerned with the application of innovative technologies to develop an internally cooled window with minimum aperture size for a large field-of-regard (FOR) multispectral seeker installed in an endoatmospheric hypersonic kill vehicle. The window should be very small and lightweight and have a built-in scanner to cover the FOR. The design of such a window requires input from several critical areas, including system requirements, optical design, fabrication of micro-optical components, cooling, optomechanical design, mechanical stress analysis, and flow-field analysis. This paper describes our approach to the development of a SMART window and the current state of our design.

  1. Space station proximity operations windows: Human factors design guidelines

    NASA Technical Reports Server (NTRS)

    Haines, Richard F.

    1987-01-01

    Proximity operations refers to all activities outside the Space Station which take place within a 1-km radius. Since there will be a large number of different operations involving manned and unmanned vehicles, single- and multiperson crews, automated and manually controlled flight, a wide variety of cargo, and construction/repair activities, accurate and continuous human monitoring of these operations from a specially designed control station on Space Station will be required. Total situational awareness will be required. This paper presents numerous human factors design guidelines and related background information for control windows which will support proximity operations. Separate sections deal with natural and artificial illumination geometry; all basic rendezvous vector approaches; window field-of-view requirements; window size; shape and placement criteria; window optical characteristics as they relate to human perception; maintenance and protection issues; and a comprehensive review of windows installed on U.S. and U.S.S.R. manned vehicles.

  2. Design and Characterization of the ALMA Band 5 Vacuum Window

    NASA Astrophysics Data System (ADS)

    Schroder, Arne; Murk, Axel; Yagoubov, Pavel; Patt, Ferdinand

    2016-01-01

    This paper summarizes the electromagnetic design process of the vacuum window for the Atacama Large Millimeter/sub-millimeter Array (ALMA) Band 5 (163-211 GHz). We have carried out investigations by means of numerical simulations as well as reflection and transmission measurements. Simulations were performed using the finite element method, an efficient quasi-analytical technique, and rigorous coupled-wave analysis. We used an injection-molded vacuum window prototype as a starting point of the design process and investigated deterioration in the electromagnetic performance caused by different types of manufacturing artifacts. Following these analyses, an optimization of the window has been performed based on simulations. We measured the reflectivity and transmittance of the newly designed window and this paper demonstrates that the optimized window exhibits a return loss better than -20 dB, as required by the ALMA specifications.

  3. Design of large aperture, low mass vacuum windows

    SciTech Connect

    Leonhardt, W.J.; Mapes, M.

    1993-01-01

    Large vacuum vessels are employed downstream of fixed targets in High Energy Physics experiments to provide a long path for particles to traverse without interacting with air molecules. These vessels generally have a large aperture opening known as a vacuum window which employs a thin membrane to preserve the vacuum environment yet allows the particles to pass through with a minimal effect on them. Several large windows have been built using a composite of Kevlar/Mylar including circular windows to a diameter of 96.5 cm and rectangular windows up to 193 cm x 86 cm. This paper describes the design, fabrication, testing and operating experience with these windows and relates the actual performance to theoretical predictions.

  4. Design of large aperture, low mass vacuum windows

    SciTech Connect

    Leonhardt, W.J.; Mapes, M.

    1993-07-01

    Large vacuum vessels are employed downstream of fixed targets in High Energy Physics experiments to provide a long path for particles to traverse without interacting with air molecules. These vessels generally have a large aperture opening known as a vacuum window which employs a thin membrane to preserve the vacuum environment yet allows the particles to pass through with a minimal effect on them. Several large windows have been built using a composite of Kevlar/Mylar including circular windows to a diameter of 96.5 cm and rectangular windows up to 193 cm x 86 cm. This paper describes the design, fabrication, testing and operating experience with these windows and relates the actual performance to theoretical predictions.

  5. Study of noise transmission through double wall aircraft windows

    NASA Technical Reports Server (NTRS)

    Vaicaitis, R.

    1983-01-01

    Analytical and experimental procedures were used to predict the noise transmitted through double wall windows into the cabin of a twin-engine G/A aircraft. The analytical model was applied to optimize cabin noise through parametric variation of the structural and acoustic parameters. The parametric study includes mass addition, increase in plexiglass thickness, decrease in window size, increase in window cavity depth, depressurization of the space between the two window plates, replacement of the air cavity with a transparent viscoelastic material, change in stiffness of the plexiglass material, and different absorptive materials for the interior walls of the cabin. It was found that increasing the exterior plexiglass thickness and/or decreasing the total window size could achieve the proper amount of noise reduction for this aircraft. The total added weight to the aircraft is then about 25 lbs.

  6. Multi-Window Controllers for Autonomous Space Systems

    NASA Technical Reports Server (NTRS)

    Lurie, B, J.; Hadaegh, F. Y.

    1997-01-01

    Multi-window controllers select between elementary linear controllers using nonlinear windows based on the amplitude and frequency content of the feedback error. The controllers are relatively simple to implement and perform much better than linear controllers. The commanders for such controllers only order the destination point and are freed from generating the command time-profiles. The robotic missions rely heavily on the tasks of acquisition and tracking. For autonomous and optimal control of the spacecraft, the control bandwidth must be larger while the feedback can (and, therefore, must) be reduced.. Combining linear compensators via multi-window nonlinear summer guarantees minimum phase character of the combined transfer function. It is shown that the solution may require using several parallel branches and windows. Several examples of multi-window nonlinear controller applications are presented.

  7. Thermoluminescence dosimetric properties and effective atomic numbers of window glass

    NASA Astrophysics Data System (ADS)

    Bootjomchai, Cherdsak; Laopaiboon, Raewat

    2014-03-01

    This work presents the main thermoluminescence (TL) dosimetric characteristics of commercial Thai transparent window glass. The amorphous structure of window glass was investigated by XRD. The glow curve revealed a peak (Tm) at 235 °C. The thermoluminescence response of window glass was studied after irradiation with photons in the absorb dose range of 0-14.05 mGy, which is of interest for the personal protection level of dosimetry. A linear response was obtained after both the first irradiation and the second irradiation. The minimum detectable dose of window glass was 0.15 mGy. The effective atomic number of window glass as a function of photon energy was calculated. The obtained results for the effective atomic number showed that it is very close to that of human biological tissues (Zeff = 6.7-8.4 at studied energy).

  8. Design options for low-conductivity window frames

    SciTech Connect

    Byars, N.; Arasteh, D.

    1990-10-01

    The window industry's commercialization of low-emissivity coatings and low-conductivity gas-filling over the past few years has helped to drastically reduce heat transfer rates through the glazed areas of windows. However, few changes have taken place in the design and construction of window frames and edges, leaving these elements to account for most of the heat transfer through today's state-of-the-art windows. This paper presents design and material requirements for the manufacture of low-conductivity window frames obtained through the use of finite element computer modeling. Such frames will compliment and not degrade today's most energy-efficient insulated glass units. 7 refs., 2 figs., 5 tabs.

  9. Operational efficiency increase in a copper vapor laser due to the replacement of vacuum jacket brewster windows with flat windows

    NASA Technical Reports Server (NTRS)

    Estep, Lee; Witherspoon, Ned; Holloway, John; Price, Brian; Miller, Robert

    1989-01-01

    The vacuum integrity of the discharge tube of a copper vapor laser (CVL) is normally protected by Brewster angled windows. In an attempt to increase the operating efficiency of the CVL, flat windows were used to replace the Brewster windows. Experimental data confirm that the overall efficiency of the CVL does increase when such windows are used. The experimental results are discussed in terms of a computer model found in the literature. The cause of the efficiency increase appears due to a double optical cavity set up by the flat windows. However, the variation of the efficiency due to changes in the pulse repetition frequency (PRF) and buffer gas pressure are less well understood.

  10. Windows of Opportunity for Groundwater Management

    NASA Astrophysics Data System (ADS)

    Foster, T.; Brozovic, N.; Butler, A. P.

    2015-12-01

    To date, there has been little attention focused on how the value and effectiveness of groundwater management is influenced by the timing of regulatory intervention relative to aquifer depletion. To address this question, we develop an integrated framework that couples an agro-economic model of farmers' field-level irrigation decision-making with a model of a groundwater abstraction borehole. Unlike existing models that only consider the impact of aquifer depletion on groundwater extraction costs, our model also captures the dynamic changes in well productivity and how these in turn affect crop yields and farmer incomes. We use our model to analyze how the value of imposing groundwater quotas is affected by the prior level of depletion before regulations are introduced. Our results demonstrate that there is a range of aquifer conditions within which regulating groundwater use will deliver long-term economic benefits for farmers. In this range, restricting abstraction rates slows the rate of change in well yields and, as a result, increases agricultural production over the simulated planning horizon. Contrastingly, when current saturated thickness is outside this range, regulating groundwater use will provide negligible social benefits and will impose large negative impacts on farm-level profits. We suggest that there are 'windows of opportunity' for managing aquifer depletion that are a function of local hydrology as well as economic characteristics. Regulation that is too early will harm the rural economy needlessly, while regulation that is too late will be unable to prevent aquifer exhaustion. The insights from our model can be a valuable tool to help inform policy decisions about when, and at what level, regulations should be implemented in order to maximize the benefits obtained from limited groundwater resources.

  11. Tuning sum rules with window functions for optical constant evaluation

    NASA Astrophysics Data System (ADS)

    Rodríguez-de Marcos, Luis V.; Méndez, José A.; Larruquert, Juan I.

    2016-07-01

    Sum rules are a useful tool to evaluate the global consistency of a set of optical constants. We present a procedure to spectrally tune sum rules to evaluate the local consistency of optical constants. It enables enhancing the weight of a desired spectral range within the sum-rule integral. The procedure consists in multiplying the complex refractive index with an adapted function, which is named window function. Window functions are constructed through integration of Lorentz oscillators. The asymptotic decay of these window functions enables the derivation of a multiplicity of sum rules akin to the inertial sum rule, along with one modified version of f-sum rule. This multiplicity of sum rules combined with the free selection of the photon energy range provides a double way to tune the spectral contribution within the sum rule. Window functions were applied to reported data of SrF2 and of Al films in order to check data consistency over the spectrum. The use of window functions shows that the optical constants of SrF2 are consistent in a broad spectrum. Regarding Al, some spectral ranges are seen to present a lower consistency, even though the standard sum rules with no window function did not detect inconsistencies. Hence window functions are expected to be a helpful tool to evaluate the local consistency of optical constants.

  12. Multimodality imaging in an orthotopic mammary window chamber model

    NASA Astrophysics Data System (ADS)

    Schafer, Rachel; Leung, Hui Min; Gmitro, Arthur F.

    2013-02-01

    Window chamber models have been utilized for many years to investigate cancer development and the tumor microenvironment. Orthotopic mammary window chamber model have been developed for detailed study of breast cancer. Orthotopic window chamber models, due to the native environment, support more realistic growth and tumor behavior than ectopic models. The work by other groups thus far utilizing mammary window chamber models has focused solely on optical imaging techniques, limited to probing the first millimeter or less of tissue. These techniques do not take full advantage of the unrestricted, three-dimensional tumor growth the model supports. We have developed a custom plastic structure compatible with multimodality imaging. We present in this work the implementation of our custom window chamber in a mouse model and the successful imaging of the window chamber cancer model with MRI, nuclear imaging, and optical techniques. MRI provides a full three-dimensional view of the tumor growth and allows for additional, potentially clinically translatable, approaches to be utilized in investigating the cancer microenvironment. Nuclear imaging is accomplished using the Beta Imager, which is a novel approach to nuclear imaging of window chambers. The Beta Imager detects photons after the interaction of a single positron with a scintillator, instead of the coincidence detection of annihilation gamma ray pairs. We utilized the radioisotope glucose analog, 2-deoxy-2- (18F)fluoro-D-glucose or FDG, with the Beta Imager to obtain information on the glycolytic metabolism of the tumor and surrounding region.

  13. Thermal energy conservation with draperies and a plastic window liner

    SciTech Connect

    Sloan, D.L.

    1984-01-01

    The contributions of draperies, a plastic window liner, and fabric properties to heat loss reduction were studied. Research questions were developed relative to the contribution of the following to heat loss reduction: properties of drapery fabrics, and the effectiveness of 1) a temporary plastic indoor window liner, and 2) combining draperies with a plastic window liner. Four fabrics (Malimo, Maliwatt, glass and coated) for the window treatments were selected from 12 fabrics on the basis of thermal resistance, in combination with air permeability and thickness. Density, weight, yarn count, fabric construction, and yarn construction were also determined. The draperies were tested sealed (Velcro tape and a three-sided cornice) and unsealed, and with and without a plastic window liner. The effectiveness of each treatment was determined by comparing the percentage of heat loss reduction to the heat loss at the bare window. Yarn count, thickness, density and air permeability accounted for 76% of the variability of the thermal resistance of the fabrics; mean values ranged from 0.95 ft/sup 2/ hr /sup 0/F/Btu (Maliwatt) to 0.66 ft/sup 2/ hr /sup 0/F/Btu (coated). The plastic window liner was the most effective in reducing heat loss (75%).

  14. Switchable Solar Window Devices Based on Polymer Dispersed Liquid Crystals

    NASA Astrophysics Data System (ADS)

    Murray, Joseph; Ma, Dakang; Munday, Jeremy

    Windows are an interesting target for photovoltaics due to the potential for large area of deployment and because glass is already a ubiquitous component of solar cell devices. Many demonstrations of solar windows in recent years have used photovoltaic devices which are semitransparent in the visible region. Much research has focused on enhancing device absorption in the UV and IR ranges as a means to circumvent the basic tradeoff between efficiency and transparency to visible light. Use of switchable solar window is a less investigated alternative approach; these windows utilize the visible spectrum but can toggle between high transparency and high efficiency as needed. We present a novel switchable solar window device based on Polymer Dispersed Liquid Crystals (PDLC). By applying an electric field to the PDLC layer, the device can be switched from an opaque, light diffusing, efficient photovoltaic cell to a clear, transparent window. In the off state (i.e. scattering state), these devices have the added benefits of increased reflectivity for reduced lighting and cooling costs and haze for privacy. Further, we demonstrate that these windows have the potential for self-powering due to the very low power required to maintain the on, or high transparency, state. Support From: University of Maryland and Maryland Nano-center and its Fablab.

  15. Multilayered microelectronic device package with an integral window

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2003-01-01

    An apparatus for packaging of microelectronic devices is disclosed, wherein the package includes an integral window. The microelectronic device can be a semiconductor chip, a CCD chip, a CMOS chip, a VCSEL chip, a laser diode, a MEMS device, or a IMEMS device. The package can comprise, for example, a cofired ceramic frame or body. The package has an internal stepped structure made of a plurality of plates, with apertures, which are patterned with metallized conductive circuit traces. The microelectronic device can be flip-chip bonded on the plate to these traces, and oriented so that the light-sensitive side is optically accessible through the window. A cover lid can be attached to the opposite side of the package. The result is a compact, low-profile package, having an integral window that can be hermetically-sealed. The package body can be formed by low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC) multilayer processes with the window being simultaneously joined (e.g. cofired) to the package body during LTCC or HTCC processing. Multiple chips can be located within a single package, according to some embodiments. The cover lid can include a window. The apparatus is particularly suited for packaging of MEMS devices, since the number of handling steps is greatly reduced, thereby reducing the potential for contamination. The integral window can further include a lens for optically transforming light passing through the window. The package can include an array of binary optic lenslets made integral with the window. The package can include an electrically-switched optical modulator, such as a lithium niobate window attached to the package, for providing a very fast electrically-operated shutter.

  16. Effect of window reflections on photonic Doppler velocimetry measurements

    NASA Astrophysics Data System (ADS)

    Ao, T.; Dolan, D. H.

    2011-02-01

    Photonic Doppler velocimetry (PDV) has rapidly become a standard diagnostic for measuring velocities in dynamic compression research. While free surface velocity measurements are fairly straightforward, complications occur when PDV is used to measure a dynamically loaded sample through a window. Fresnel reflections can severely affect the velocity and time resolution of PDV measurements, especially for low-velocity transients. Shock experiments of quartz compressed between two sapphire plates demonstrate how optical window reflections cause ringing in the extracted PDV velocity profile. Velocity ringing is significantly reduced by using either a wedge window or an antireflective coating.

  17. Windows for accepting or rejecting solar-heat gain

    NASA Astrophysics Data System (ADS)

    Peck, J. F.; Thompson, T. L.; Kessler, H. J.

    1982-09-01

    Ordinary fenestration may be modified at low cost using various combinations of windows, duotone venetian blinds, and drapes to control the solar heat gain. In the winter, solar radiation may be absorbed by dark blinds and transferred to the air, minimizing fading of furnishings while collecting useful energy. In the summer, more than 90% of the total potential window heat gain may be rejected by exhausting evaporatively cooled air over the blinds. The performance of several window configurations was analyzed, modeled on a computer, and verified experimentally.

  18. Ultra high vacuum broad band high power microwave window

    DOEpatents

    Nguyen-Tuong, V.; Dylla, H.F. III

    1997-11-04

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost. 5 figs.

  19. Ultra high vacuum broad band high power microwave window

    DOEpatents

    Nguyen-Tuong, Viet; Dylla, III, Henry Frederick

    1997-01-01

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost.

  20. T25 ITER ECH window development 110 GHz ECH distributed window development. Final report, May 1, 1994--December 31, 1995

    SciTech Connect

    Olstad, R.A.; Moeller, C.P.; Grunloh, H.J.

    1998-01-01

    Electron Cyclotron Heating (ECH) is one of the major candidates for Heating and Current Drive on ITER. ECH is extremely attractive from a reactor engineering point of view, offering compact launch structures, high injected power density, and a simple interface with the shield/blanket. Economic deployment of ECH for ITER requires MW unit microwave sources (gyrotrons). The present technology limitation is the availability of suitable low loss output windows. These are needed for the torus as well as the tube. The torus window, in particular, is a demanding application as it also serves as a tritium barrier. Several distinct window concepts are under development by the various Parties. This report summarizes the efforts to make and test a {open_quotes}distributed{close_quotes} window suitable for 1 MW cw operation at 110 GHz. A companion report (Final Report on Task 245+) describes the efforts to make a distributed window suitable for 1 MW cw operation at 170 GHz, the main frequency of interest to ITER. General Atomics (GA) fabricated a 4 in. x 4 in. 110 GHz distributed window which was delivered in September 1995 to Communications and Power Industries (CPI). Hot tests at CPI confirmed the power handling capability of the window. Tests were conducted with a reduced beam size at 200 kW with 0.7 s pulses without any arcing or excessive window temperatures. The power density and pulse length were equivalent to that in a full size 1.2 MW CW beam with a peak-to-average power ratio of 2.7. This window was assembled using a gold braze material to bond the sapphire strips to the niobium frame. The braze was successful except for small leaks at two locations, and re-braze efforts were unsuccessful.

  1. Detail of arched window and eaves molding on west elevation; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of arched window and eaves molding on west elevation; camera facing east. - Mare Island Naval Shipyard, Old Administrative Offices, Eighth Street, north side between Railroad Avenue & Walnut Avenue, Vallejo, Solano County, CA

  2. 6. VAL CAMERA STATION, VIEW FROM INTERIOR OUT OF WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VAL CAMERA STATION, VIEW FROM INTERIOR OUT OF WINDOW OPENING TOWARD VAL FIRING RANGE LOOKING SOUTHEAST WITH CAMERA MOUNT IN FOREGROUND. - Variable Angle Launcher Complex, Camera Stations, CA State Highway 39 at Morris Reservior, Azusa, Los Angeles County, CA

  3. Identifying the critical climatic time window that affects trait expression.

    PubMed

    van de Pol, Martijn; Cockburn, Andrew

    2011-05-01

    Identifying the critical time window during which climatic drivers affect the expression of phenological, behavioral, and demographic traits is crucial for predicting the impact of climate change on trait and population dynamics. Two widely used associative methods exist to identify critical climatic periods: sliding-window models and recursive operators in which the memory of past weather fades over time. Both approaches have different strong points, which we combine here into a single method. Our method uses flexible functions to differentially weight past weather, which can reflect competing hypotheses about time lags and the relative importance of recent and past weather for trait expression. Using a 22-year data set, we illustrate that the climatic window identified by our new method explains more of the phenological variation in a sexually selected trait than existing approaches. Our new method thus helps to better identify the critical time window and the causes of trait response to environmental variability. PMID:21508615

  4. 14. INTERIOR VIEW, FIRST FLOOR, EAST PARLOR, NORTHEAST (WINDOW) AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR VIEW, FIRST FLOOR, EAST PARLOR, NORTHEAST (WINDOW) AND SOUTHEAST (FIREPLACE) WALLS, LOOKING EAST (NOTE THE STENCILING ALONG THE CORNICE AND ON THE CEILING) - Clifton Farm, Off Baker Road, Frederick, Frederick County, MD

  5. 28. Brick apartment buildings with arched window openings, string courses, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. Brick apartment buildings with arched window openings, string courses, a brick cornice, and an interrupted brick frieze. - Butte Historic District, Bounded by Copper, Arizona, Mercury & Continental Streets, Butte, Silver Bow County, MT

  6. INTERIOR VIEW OF HALLWAY LOOKING TOWARD LOBBY, SHOWING WINDOW DETAILS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF HALLWAY LOOKING TOWARD LOBBY, SHOWING WINDOW DETAILS, VIEW FACING WEST-SOUTHWEST. - Naval Air Station Barbers Point, Control Tower & Aviation Operations Building, Near intersection of runways between Hangar 110 & Building 115, Ewa, Honolulu County, HI

  7. Detail of triple casement windows with operable transoms in north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of triple casement windows with operable transoms in north wall of garage, facing north. - Marine Barracks, Panama Canal, Officers' Quarters, 800' West of Bruja Road, Balboa, Former Panama Canal Zone, CZ

  8. Dennis Hill, Photographer May 1998 DETAIL VIEW OF WINDOW AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Dennis Hill, Photographer May 1998 DETAIL VIEW OF WINDOW AT TORPEDO ASSEMBLY BUILDING, FACING SOUTHEAST - Torpedo Assembly Building, Eastern end of Yerba Buena Island, San Francisco, San Francisco County, CA

  9. 15. Detail, northeast facade, operator's bow window and tower, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Detail, northeast facade, operator's bow window and tower, showing knee braces carried on stone ancons used to support eaves, view to northwest, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

  10. 29. CO'S STATEROOM, LOOKING IN FROM OUTSIDE PORT WINDOW, TOWARDS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. CO'S STATEROOM, LOOKING IN FROM OUTSIDE PORT WINDOW, TOWARDS WOODEN DOOR AND BUNK. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

  11. SECOND FLOOR FRONT ROOM, WINDOWS FACING ON WALNUT STREET (SOUTH), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SECOND FLOOR FRONT ROOM, WINDOWS FACING ON WALNUT STREET (SOUTH), ORIGINAL PANELED FOLDING SHUTTERS AND HARDWARE. For a view of closed shutters see PA-1436 A-16 - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA

  12. Photocopy of "sheet 4 of 8" showing window details, door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of "sheet 4 of 8" showing window details, door sill detail, vertical wall sections, and cross sections thru front, side and rear elevations. - Badger Mountain Lookout, .125 mile northwest of Badger Mountain summit, East Wenatchee, Douglas County, WA

  13. 26. VIEW WEST; DETAIL OF AUDITORIUM INTERIOR WINDOW CORNICE. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. VIEW WEST; DETAIL OF AUDITORIUM INTERIOR WINDOW CORNICE. - Naval Undersea Warfare Center, Bowditch Hall, 600 feet east of Smith Street & 350 feet south of Columbia Cove, West bank of Thames River, New London, New London County, CT

  14. Detail; Street Car Waiting House window, north wall North ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail; Street Car Waiting House window, north wall - North Philadelphia Station, Street Car Waiting House, 2900 North Broad Street, on northwest corner of Broad Street & Glenwood Avenue, Philadelphia, Philadelphia County, PA

  15. Elevation of information window on west wall of south lobby ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Elevation of information window on west wall of south lobby - National Home for Disabled Volunteer Soldiers, Pacific Branch, Main Mental Health Building, 11301 Wilshire Boulevard, West Los Angeles, Los Angeles County, CA

  16. Multilayered Microelectronic Device Package With An Integral Window

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2004-10-26

    A microelectronic package with an integral window mounted in a recessed lip for housing a microelectronic device. The device can be a semiconductor chip, a CCD chip, a CMOS chip, a VCSEL chip, a laser diode, a MEMS device, or a IMEMS device. The package can be formed of a low temperature co-fired ceramic (LTCC) or high temperature cofired ceramic (HTCC) multilayered material, with the integral window being simultaneously joined (e.g. co-fired) to the package body during LTCC or HTCC processing. The microelectronic device can be flip-chip bonded and oriented so that a light-sensitive side is optically accessible through the window. The result is a compact, low profile package, having an integral window mounted in a recessed lip, that can be hermetically sealed.

  17. Sealed symmetric multilayered microelectronic device package with integral windows

    DOEpatents

    Peterson, Kenneth A.; Watson, Robert D.

    2002-01-01

    A sealed symmetric multilayered package with integral windows for housing one or more microelectronic devices. The devices can be a semiconductor chip, a CCD chip, a CMOS chip, a VCSEL chip, a laser diode, a MEMS device, or a IMEMS device. The multilayered package can be formed of a low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC) multilayer processes with the windows being simultaneously joined (e.g. cofired) to the package body during LTCC or HTCC processing. The microelectronic devices can be flip-chip bonded and oriented so that the light-sensitive sides are optically accessible through the windows. The result is a compact, low-profile, sealed symmetric package, having integral windows that can be hermetically-sealed.

  18. CUPOLA CONTROL ROOM, VIEW OF CUPOLA & TURNTABLE THROUGH WINDOW. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CUPOLA CONTROL ROOM, VIEW OF CUPOLA & TURNTABLE THROUGH WINDOW. - United States Pipe & Foundry Company Plant, Melting & Treatment Areas, 2023 St. Louis Avenue at I-20/59, Bessemer, Jefferson County, AL

  19. INTERIOR DETAIL, WINDOW OPENING ONTO THE SERVICE STAIR FROM DINING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL, WINDOW OPENING ONTO THE SERVICE STAIR FROM DINING ROOM PASSAGE. OPENINGS LIKE THESE ARE PRESENT IN A NUMBER OF PLACES, “BORROWING LIGHT” FOR OTHERWISE DARK INTERIOR SPACES - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  20. LOOKOUT & DORMER WINDOW DETAILS, SHEET 6 OF 6. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOOKOUT & DORMER WINDOW DETAILS, SHEET 6 OF 6. - Oregon Inlet Coast Guard Station, Northern end of Pea Island, East side of State Road 1257, 0.3 mile North of North Carolina Highway 12, Rodanthe, Dare County, NC

  1. INTERIOR VIEW OF THE BEDROOM HALL. NOTE THE DOUBLEHUNG WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE BEDROOM HALL. NOTE THE DOUBLE-HUNG WINDOWS TO THE BEDROOM. VIEW FACING NORTHEAST. - Hickam Field, Fort Kamehameha Officers' Housing Type Z, 19 Worchester Avenue, Honolulu, Honolulu County, HI

  2. Building 736, second floor, view to southwest showing original window ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 736, second floor, view to southwest showing original window on the left, and electrical controls and entry ladder on the right - Mare Island Naval Shipyard, Electrical Distribution Centers, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  3. Detail of window treatment, suspended radiators, and fluorescent lights, prop ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of window treatment, suspended radiators, and fluorescent lights, prop shop. View to east. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  4. Large-area Kapton x-ray windows

    NASA Astrophysics Data System (ADS)

    Antimonov, M.; Khounsary, A.; Weigand, S.; Rix, J.; Keane, D.; Grudzinski, J. J.; Johnson, A.; Zhou, Z.; Jansma, W.

    2015-09-01

    Some X-ray instruments require the utilization of large-area windows to provide vacuum barriers. The necessary attributes of the window material include transparency to X-rays, low scattering, and possession of suitable mechanical properties for reliable long-term performance. Kapton is one such material except that it is a polymer and a large window made from Kapton with a pressure differential of one atmosphere across it can undergo substantial deformation at room temperature. In this paper, we report on the mechanical testing of Kapton samples including creep measurements, and comparison with published data. We use of these data together with analytical / numerical models to predict the changes in the profile of Kapton vacuum windows over time, and show good agreement with experimental measurements.

  5. CORNICE AND WINDOW DETAIL, WEST ELEVATION, LOOKING NORTHEAST (LIGHT AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CORNICE AND WINDOW DETAIL, WEST ELEVATION, LOOKING NORTHEAST (LIGHT AND DARK EXPOSURES). - Division Avenue Pumping Station & Filtration Plant, West 45th Street and Division Avenue, Cleveland, Cuyahoga County, OH

  6. 4. INTERIOR, SHOWING HOIST IN POSITION NEXT TO WINDOW FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. INTERIOR, SHOWING HOIST IN POSITION NEXT TO WINDOW FOR VIEWING TAILINGS PILE, SLOT IN FRONT WALL FOR VIEWING HEADFRAME. - A. D. Wilcox Drift Mine, Boiler Cabin, Linda Creek near Dalton Highway, Bettles, Yukon-Koyukuk Census Area, AK

  7. DETAIL, WEST SIDE SHOWING TYPICAL BUTTRESSES AND WINDOW BAY; VIEW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL, WEST SIDE SHOWING TYPICAL BUTTRESSES AND WINDOW BAY; VIEW TO NORTHEAST - Fort Bragg, Noncommissioned Officers' Service Club, Guest House Building, South of Butner Road, Fayetteville, Cumberland County, NC

  8. 7. Interior view of machinery looking at window of east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Interior view of machinery looking at window of east wall of 1953 addition, view to northeast. - Ellsworth Air Force Base, Waste Water Treatment Plant, Ellsworth Street, Blackhawk, Meade County, SD

  9. 7. VIEW WESTCHARACTERISTIC DOOR AND WINDOW OPENINGS IN EAST ELEVATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW WEST-CHARACTERISTIC DOOR AND WINDOW OPENINGS IN EAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD MACHINE SHOP. - Bethlehem Steel Company Shipyard, Machine Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  10. VO2 thermochromic smart window for energy savings and generation

    NASA Astrophysics Data System (ADS)

    Zhou, Jiadong; Gao, Yanfeng; Zhang, Zongtao; Luo, Hongjie; Cao, Chuanxiang; Chen, Zhang; Dai, Lei; Liu, Xinling

    2013-10-01

    The ability to achieve energy saving in architectures and optimal solar energy utilisation affects the sustainable development of the human race. Traditional smart windows and solar cells cannot be combined into one device for energy saving and electricity generation. A VO2 film can respond to the environmental temperature to intelligently regulate infrared transmittance while maintaining visible transparency, and can be applied as a thermochromic smart window. Herein, we report for the first time a novel VO2-based smart window that partially utilises light scattering to solar cells around the glass panel for electricity generation. This smart window combines energy-saving and generation in one device, and offers potential to intelligently regulate and utilise solar radiation in an efficient manner.

  11. Structure and function of window glass and Pyrex

    NASA Astrophysics Data System (ADS)

    Phillips, J. C.; Kerner, R.

    2008-05-01

    Window glass is a ternary mixture, while Pyrex (after window glass, the most common form of commercial glass) is a quaternary. Here, we investigate the chemical, physical, and mathematical factors that determine the compositions of these optimized glasses. Previously, we succeeded in deriving exactly the composition of window glass (sodium calcium silicate) without adjustable parameters. Borosilicates are a much more challenging problem, and Pyrex (sodium aluminum borosilicate) requires a different approach. Our analysis shows that mean-field (or global) models (networks without significant clustering) are sufficient for window glass and probably most other commercial silicate glasses. However, it appears that the most important property of pyrex, its ability to resist mechanical shocks, requires a cluster model (large medium range order). We propose such a model, and argue that it also follows from hierarchical principles. Our model is strongly supported by specific experiments, and we suggest further experiments to test the principles underlying commercial glasses.

  12. 7. LIGHT WELLPhotograph taken from a fourth floor window. The ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. LIGHT WELL--Photograph taken from a fourth floor window. The skylight, now covered, can be seen at the bottom. Northwest - Empire Building, 430 Sixteenth Street, South Corner of Sixteenth Street & Glenarm Place, Denver, Denver County, CO

  13. DETAIL, WINDOW ON THE NORTH FACADE, LOOKING SOUTH Eglin ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL, WINDOW ON THE NORTH FACADE, LOOKING SOUTH - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

  14. VIEW OF TYPICAL WINDOW ON THE WEST (FRONT) FACADE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF TYPICAL WINDOW ON THE WEST (FRONT) FACADE, LOOKING EAST - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

  15. DETAILS, EAVES AND WINDOWS OF THE EAST (REAR) FACADE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAILS, EAVES AND WINDOWS OF THE EAST (REAR) FACADE, LOOKING NORTH - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

  16. DETAILS, ROOF VENTS AND WINDOWS, NORTHERN CORNER SECTION OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAILS, ROOF VENTS AND WINDOWS, NORTHERN CORNER SECTION OF THE EAST (REAR) FACADE, LOOKING NORTHWEST - Eglin Air Force Base, Storehouse & Company Administration, Southeast of Flager Road, Nassau Lane, & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

  17. DETAIL OF NORTHWESTERN CORNER, WEST FACADE, SHOWING WINDOW AND LOADING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF NORTHWESTERN CORNER, WEST FACADE, SHOWING WINDOW AND LOADING DOCK RAMP, LOOKING SOUTH - Eglin Air Force Base, Motor Repair Shop, Northwest of Flager Road, Chisk Lane & southern edge of Weekly Bayou, Valparaiso, Okaloosa County, FL

  18. 12. Detail, typical window with fireproof shutters open, northeast rear, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Detail, typical window with fireproof shutters open, northeast rear, view to southwest, 135mm lens. Note cracks evidencing structural failure. - Benicia Arsenal, Powder Magazine No. 5, Junction of Interstate Highways 680 & 780, Benicia, Solano County, CA

  19. 13. Detail, typical window with fireproof shutters closed, northeast rear, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Detail, typical window with fireproof shutters closed, northeast rear, view to southwest, 135mm lens. Note cracks evidencing structural failure. - Benicia Arsenal, Powder Magazine No. 5, Junction of Interstate Highways 680 & 780, Benicia, Solano County, CA

  20. Interior detail of stainedglass window in administrative wing, looking southeast ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior detail of stained-glass window in administrative wing, looking southeast - U.S. Veterans Hospital, Jefferson Barracks, Chapel, VA Medical Center, Jefferson Barracks Division 1 Jefferson Barracks Drive, Saint Louis, Independent City, MO

  1. View of back of garage, windows of bays 13, facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of back of garage, windows of bays 1-3, facing southwest. - Presidio of San Francisco, Officers' Vehicles Garage, 1055 General Kennedy Avenue, Letterman Hospital Complex, San Francisco, San Francisco County, CA

  2. INTERIOR OF BUILDING 2, TYPICAL OFFICE (#212) WINDOW AND HEAT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF BUILDING 2, TYPICAL OFFICE (#212) WINDOW AND HEAT REGISTER, SECOND FLOOR. FACING SOUTH - Roosevelt Base, Dispensary, Corner of Colorado Street & Richardson Avenue, Long Beach, Los Angeles County, CA

  3. 4. DETAIL VIEW OF WINDOW AT CHEMICAL STORAGE BUILDING (#1776), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. DETAIL VIEW OF WINDOW AT CHEMICAL STORAGE BUILDING (#1776), LOOKING EAST - Presidio Water Treatment Plant, Chemical Storage, East of Lobos Creek at Baker Beach, San Francisco, San Francisco County, CA

  4. Windows NT Systems for Libraries: An Overview of Emerging Products.

    ERIC Educational Resources Information Center

    Cibbarelli, Pamela

    1997-01-01

    Provides a comprehensive list of all the major vendors offering the Windows NT operating system, the latest in integrated online library systems software. Describes features and capabilities; platforms; and libraries where it is installed. (AEF)

  5. Detail view highlighting the series of pointed arch windows along ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view highlighting the series of pointed arch windows along the North Carrollton facade - Reformed Episcopal Church of the Rock of Ages, 1210 West Lanvale Street, Baltimore, Independent City, MD

  6. 24. INTERIOR OF BEDROOM NO. 2 SHOWING ALUMINUMFRAMED SLIDINGGLASS WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. INTERIOR OF BEDROOM NO. 2 SHOWING ALUMINUM-FRAMED SLIDING-GLASS WINDOWS ON NORTH AND EAST WALLS. VIEW TO NORTHEAST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA

  7. High power windows for WR650 waveguide couplers

    SciTech Connect

    Mircea Stirbet; Robert Rimmer; Thomas Elliott; Edward Daly; Katherine Wilson; Lynn Vogel; Haipeng Wang; Brian Carpenter; Karl Smith; Thomas Powers; Michael Drury; Robert Nichols; G. Davis

    2007-06-01

    Based on the robust, pre-stressed planar window concept successfully tested for PEP II and LEDA, a new design for planar ceramic windows to be used with WR650 waveguide fundamental power couplers at 1300 MHz or 1500 MHz has been developed. These windows should operate in pulsed or CW mode and sustain at least 100 kW average power levels. This paper describes an overview of the simulations performed to match the ceramics in WR650 waveguides, design details, as well as the RF measurements and performance assessed by RF power tests on several high power windows manufactured at JLAB. Funding Agency: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177, and by The Office of Naval Research under contract to the Dept. of Energy.

  8. Window structure for passivating solar cells based on gallium arsenide

    NASA Technical Reports Server (NTRS)

    Barnett, Allen M. (Inventor)

    1985-01-01

    Passivated gallium arsenide solar photovoltaic cells with high resistance to moisture and oxygen are provided by means of a gallium arsenide phosphide window graded through its thickness from arsenic rich to phosphorus rich.

  9. 8. Interior view of administrator's office, showing exterior windows; near ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Interior view of administrator's office, showing exterior windows; near northwest corner of west wing; view to south. - Ellsworth Air Force Base, Administration Office, 2704 George Drive, Blackhawk, Meade County, SD

  10. 14. CLOSEUP VIEW OF WINDOW IN SIGNAL TOWER OFFICE FACING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. CLOSE-UP VIEW OF WINDOW IN SIGNAL TOWER OFFICE FACING WEST. - U.S. Naval Base, Pearl Harbor, Signal Tower, Corner of Seventh Street & Avenue D east of Drydock No. 1, Pearl City, Honolulu County, HI

  11. Interior detail of north wall with windows and stairway; camera ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior detail of north wall with windows and stairway; camera facing northeast. - Mare Island Naval Shipyard, Marine Prison, Suisun Avenue, west side between Mesa Road & San Pablo, Vallejo, Solano County, CA

  12. Detail of windows on first floor east elevation of north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of windows on first floor east elevation of north wing; camera facing west. - Mare Island Naval Shipyard, Marine Prison, Suisun Avenue, west side between Mesa Road & San Pablo, Vallejo, Solano County, CA

  13. Detail of second floor window, south wall of north wing; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of second floor window, south wall of north wing; camera facing south. - Mare Island Naval Shipyard, Marine Prison, Suisun Avenue, west side between Mesa Road & San Pablo, Vallejo, Solano County, CA

  14. 18. 'Petite Cuisine' room, view east. Window at left also ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. 'Petite Cuisine' room, view east. Window at left also shown in exterior photo HABS-CA-26121-B-8. - Deetjen's Big Sur Inn, Hayloft Building, East Side of State Highway 1, Big Sur, Monterey County, CA

  15. Steinway piano and stained glass clerestory window in lounge area, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Steinway piano and stained glass clerestory window in lounge area, upper deck. Hot water radiators can be seen at base of wall. These run throughout the houseboat. - Houseboat LA DUCHESSE, The Antique Boat Museum, Clayton, Jefferson County, NY

  16. DETAIL OF EAVES AND HOODS OVER WINDOWS ON NORTHEAST END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF EAVES AND HOODS OVER WINDOWS ON NORTHEAST END OF NORTHWEST SIDE, WITH SEABEE STATUE IN BACKGROUND. - U.S. Naval Base, Pearl Harbor, Joint Intelligence Center, Makalapa Drive in Makalapa Administration Area, Pearl City, Honolulu County, HI

  17. Hydrogen Safety Project: Chemical analysis support task. Window ``E`` analyses

    SciTech Connect

    Jones, T E; Campbell, J A; Hoppe, E W; Greenwood, L R; Gillespie, B M

    1992-09-01

    Core samples taken from tank 101-SY at Hanford during ``window E`` were analyzed for organic and radiochemical constituents by staff of the Analytical Chemistry Laboratory at Pacific Northwest Laboratory. Westinghouse Hanford company submitted these samples to the laboratory.

  18. 7. DETAIL OF NORTHWEST CORNER, SHOWING WINDOWS, PARAPET COPING AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL OF NORTHWEST CORNER, SHOWING WINDOWS, PARAPET COPING AND STONE INTERNATIONAL HARVESTER EMBLEM. VIEW TO SOUTHEAST. - Commercial & Industrial Buildings, International Harvester Company Showroom, Office & Warehouse, 10 South Main Street, Dubuque, Dubuque County, IA

  19. Detail of arched window on north portion of south wing, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of arched window on north portion of south wing, showing stone foundation; camera facing north. - Mare Island Naval Shipyard, Smithery, California Avenue, west side at California Avenue & Eighth Street, Vallejo, Solano County, CA

  20. Detail of arched window by main entry on west elevation; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of arched window by main entry on west elevation; showing Stone Foundation; camera facing east. - Mare Island Naval Shipyard, Smithery, California Avenue, west side at California Avenue & Eighth Street, Vallejo, Solano County, CA

  1. 42. DETAIL OF TRIPLE WINDOW ELEMENT WITH DECORATIVE BRICK SURROUND, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. DETAIL OF TRIPLE WINDOW ELEMENT WITH DECORATIVE BRICK SURROUND, ON EAST SIDE OF 1931 SECTION, TAKEN FROM THE EAST. - James Russell Lowell Elementary School, 4501 Crittenden Drive, Louisville, Jefferson County, KY

  2. 41. DETAIL OF DOUBLE WINDOW ELEMENT WITH ARCHED BRICK PATTERN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. DETAIL OF DOUBLE WINDOW ELEMENT WITH ARCHED BRICK PATTERN ON EAST SIDE OF 1931 SECTION, TAKEN FROM THE EAST. - James Russell Lowell Elementary School, 4501 Crittenden Drive, Louisville, Jefferson County, KY

  3. 36. DETAIL OF WINDOW ELEMENT WITH DECORATIVE BRICK PATTERN ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. DETAIL OF WINDOW ELEMENT WITH DECORATIVE BRICK PATTERN ON MAIN FRONT OF 1931 SECTION, TAKEN FROM THE NORTH. - James Russell Lowell Elementary School, 4501 Crittenden Drive, Louisville, Jefferson County, KY

  4. 18. INTERIOR DETAIL VIEW OF STAINED GLASS WINDOW LOCATED AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. INTERIOR DETAIL VIEW OF STAINED GLASS WINDOW LOCATED AT SOUTH SIDE OF ALTAR, NOTE INSCRIPTION DEDICATED IN THE MEMORY OF FATHER DAMIEN - St. Francis Catholic Church, Moloka'i Island, Kalaupapa, Kalawao County, HI

  5. Astronaut Richard Richards looks out of Discovery's flight deck window

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Astronaut Richard N. Richards, mission commander, looks through one of the Space Shuttle Discovery's overhead flight deck windows to view the space walk activities of astronauts Carl J. Meade, who took this picture, and Mark C. Lee.

  6. Original blackandwhite print, VIEW OF TYPICAL STAIRWAY WINDOW AT NORTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Original black-and-white print, VIEW OF TYPICAL STAIRWAY WINDOW AT NORTHWEST CORNER OF EXTENSION - Internal Revenue Service Headquarters Building, 1111 Constitution Avenue Northwest, Washington, District of Columbia, DC

  7. Original blackandwhite print, VIEW OF FIRST FLOOR STAIRWAY WINDOW AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Original black-and-white print, VIEW OF FIRST FLOOR STAIRWAY WINDOW AT NORTHWEST CORNER OF EXTENSION - Internal Revenue Service Headquarters Building, 1111 Constitution Avenue Northwest, Washington, District of Columbia, DC

  8. north elevation, south elevation, building section, window details Chopawamsic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    north elevation, south elevation, building section, window details - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Main Arts and Crafts Lodge, Prince William Forest Park, Triangle, Prince William County, VA

  9. View from window of southeast room (bed room no. 1), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View from window of southeast room (bed room no. 1), second floor, commandant's house, looking east across parade ground. - Fort Simcoe, Commandant's House & Blockhouse, Fort Simcoe Road, White Swan, Yakima County, WA

  10. Ground floor window detail (on west wall of the east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Ground floor window detail (on west wall of the east projecting wing) - Fitzsimons General Hospital, Main Hospital Building, Charlie Kelly Boulevard, North side, at intersection of Sharon A. Lane Drive, Aurora, Adams County, CO

  11. Windows and stairway on the north side of the building ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Windows and stairway on the north side of the building (second floor) - Fitzsimons General Hospital, Nurses' Quarters, West Charlie Kelly Boulevard, North side, between South Reed Street & South Sheehan Street, Aurora, Adams County, CO

  12. 17. Detail of window inside east half (1888 part) of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Detail of window inside east half (1888 part) of main section of roundhouse. View to north. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  13. 30. Interior detail view of arched, steelframed stainedglass windows at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. Interior detail view of arched, steel-framed stained-glass windows at the landing of the south stairs in main lobby, view looking south - University of Oregon Museum of Art, 1470 Johnson Lane, Eugene, Lane County, OR

  14. Detail of parapet, frieze, and castings at windows. South elevation; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of parapet, frieze, and castings at windows. South elevation; camera facing north. - Mare Island Naval Shipyard, Hospital Headquarters, Johnson Lane, west side at intersection of Johnson Lane & Cossey Street, Vallejo, Solano County, CA

  15. Newel Post, Handrail and Baluster; Typical Window Sill; Stair Nosing; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Newel Post, Handrail and Baluster; Typical Window Sill; Stair Nosing; Northeast Porch Railing; Newel Post Drop; Second Floor Baseboard - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Engineer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  16. Integrated smart electrochromic windows for energy saving and storage applications.

    PubMed

    Xie, Zhong; Jin, Xiujuan; Chen, Gui; Xu, Jing; Chen, Di; Shen, Guozhen

    2014-01-18

    A self-powered electrochromic smart window with tunable transmittance driven by dye-sensitized solar cells has been designed, which also acts as a photocharged electrochromic supercapacitor with high areal capacitance and reversible color changes. PMID:24281715

  17. VO₂ thermochromic smart window for energy savings and generation.

    PubMed

    Zhou, Jiadong; Gao, Yanfeng; Zhang, Zongtao; Luo, Hongjie; Cao, Chuanxiang; Chen, Zhang; Dai, Lei; Liu, Xinling

    2013-01-01

    The ability to achieve energy saving in architectures and optimal solar energy utilisation affects the sustainable development of the human race. Traditional smart windows and solar cells cannot be combined into one device for energy saving and electricity generation. A VO2 film can respond to the environmental temperature to intelligently regulate infrared transmittance while maintaining visible transparency, and can be applied as a thermochromic smart window. Herein, we report for the first time a novel VO2-based smart window that partially utilises light scattering to solar cells around the glass panel for electricity generation. This smart window combines energy-saving and generation in one device, and offers potential to intelligently regulate and utilise solar radiation in an efficient manner. PMID:24157625

  18. Interior, detail closeup shot of window with stained glass inserts ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, detail closeup shot of window with stained glass inserts in top southeast room taken from ther west - J. Weingartner & Son Cigar Factory, 414 East Walnut Street, North Wales, Montgomery County, PA

  19. 6. Vick Farm, interior perspective of stained glass window, added ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Vick Farm, interior perspective of stained glass window, added as part of deck addition on west side. - Vick Farm, North side Idlewild Road, 0.2 mile northwest of Idlewild & Maplewood Drive, Burlington, Boone County, KY

  20. 4. September 1969 DETAIL OF STAINED GLASS WINDOWS IN EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. September 1969 DETAIL OF STAINED GLASS WINDOWS IN EAST WALL, INTERIOR VIEW FROM BALCONY - Mount Zion United Methodist Church, 1334 Twenty-ninth Street Northwest, Washington, District of Columbia, DC