Science.gov

Sample records for 1-m solar telescope

  1. First generation solar adaptive optics system for 1-m New Vacuum Solar Telescope at Fuxian Solar Observatory

    NASA Astrophysics Data System (ADS)

    Rao, Chang-Hui; Zhu, Lei; Rao, Xue-Jun; Zhang, Lan-Qiang; Bao, Hua; Ma, Xue-An; Gu, Nai-Ting; Guan, Chun-Lin; Chen, Dong-Hong; Wang, Cheng; Lin, Jun; Jin, Zen-Yu; Liu, Zhong

    2016-02-01

    The first generation solar adaptive optics (AO) system, which consists of a fine tracking loop with a tip-tilt mirror (TTM) and a correlation tracker, and a high-order correction loop with a 37-element deformable mirror (DM), a correlating Shack-Hartmann (SH) wavefront sensor (WFS) based on the absolute difference algorithm and a real time controller (RTC), has been developed and installed at the 1-m New Vacuum Solar Telescope (NVST) that is part of Fuxian Solar Observatory (FSO). Compared with the 37-element solar AO system developed for the 26-cm Solar Fine Structure Telescope, administered by Yunnan Astronomical Observatories, this AO system has two updates: one is the subaperture arrangement of the WFS changed from square to hexagon; the other is the high speed camera of the WFS and the corresponding real time controller. The WFS can be operated at a frame rate of 2100 Hz and the error correction bandwidth can exceed 100 Hz. After AO correction, the averaged residual image motion and the averaged RMS wavefront error are reduced to 0.06″ and 45 nm, respectively. The results of on-sky testing observations demonstrate better contrast and finer structures of the images taken with AO than those without AO.

  2. Instrument Description and Performance Evaluation of a High-Order Adaptive Optics System for the 1 m New Vacuum Solar Telescope at Fuxian Solar Observatory

    NASA Astrophysics Data System (ADS)

    Rao, Changhui; Zhu, Lei; Rao, Xuejun; Zhang, Lanqiang; Bao, Hua; Kong, Lin; Guo, Youming; Zhong, Libo; Ma, Xue'an; Li, Mei; Wang, Cheng; Zhang, Xiaojun; Fan, Xinlong; Chen, Donghong; Feng, Zhongyi; Gu, Naiting; Liu, Yangyi

    2016-12-01

    A high-order solar adaptive optics (AO) system including a fine tracking loop and a high-order wavefront correction loop has been installed at the 1 m New Vacuum Solar Telescope of the Fuxian Solar Observatory, in routine operation since 2016. The high-order wavefront correction loop consists of a deformable mirror with 151 actuators, a correlating Shack-Hartmann wavefront sensor with 102 subapertures of which the Absolute Difference Square Algorithm is used to extract the gradients, and a custom-built real-time controller based on a Field-Programmable Gate Array (FPGA) and multi-core Digital Signal Processor (DSP). The frame rate of the wavefront sensor is up to 3500 Hz and this is, to our knowledge, the fastest solar AO system. This AO system can work with a Fried parameter r 0, at the 500 nm wavelength, of larger than 3 cm. The first 65 modes of the Zernike aberrations can be efficiently corrected and the Strehl ratio of the corrected TiO image for the solar pore is superior to 0.75 with the Fried parameter r 0 larger than 10 cm. In this paper, the design of the system is described, and high-resolution solar observational images are presented. Furthermore, the performances of the AO system are evaluated according to the data recorded by the real-time controller.

  3. A Lithium Abundance Study of Solar-type Stars in Blanco 1 using the 2.1m McDonald Telescope: Developing Undergraduate Research Experiences.

    NASA Astrophysics Data System (ADS)

    Cargile, Phillip; James, D. J.; Villalon, K.; Girgenti, S.; Mermilliod, J.

    2007-12-01

    We present a new catalog of lithium equivalent widths for 20 solar-type stars in the young (60-100 Myr), nearby (250 pc) open cluster Blanco 1, measured from high-resolution spectra (R 30,000), taken during an observing run on the 2.1m telescope at McDonald Observatory. These new lithium data, coupled with the 20 or so extant measurements in the literature, are used in combination with the results of a recently completed standardized BVIc CCD survey, and corresponding 2MASS near-infrared colors, to derive precise lithium abundances for solar-type stars in Blanco 1. Comparing these new results with the existing lithium dataset for other open clusters, we investigate the mass- and age-dependent lithium depletion distribution among early-epoch (< 1Gyr) solar-type stars, and specifically, the lithium abundance scatter as a function of mass in Blanco 1. Our scientific project is highly synergystic with a pedagogical philosophy. We have instituted a program whereby undergraduate students - typically majoring in Liberal Arts and performing an independent study in Astronomy - receive hands-on research experience observing with the 2.1m telescope at the McDonald Observatory. After their observing run, these undergraduates take part in the reduction and analysis of the acquired spectra, and their research experience typically culminates in writing an undergraduate thesis and/or giving a professional seminar to the Astronomy group at Vanderbilt University.

  4. The solar optical telescope

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Objectives of the Solar Optical Telescope are to study the physics of the Sun on the scale at which many of the important physical processes occur and to attain a resolution of 73km on the Sun or 0.1 arc seconds of angular resolution. Topics discussed in this overview of the Solar Optical Telescope include: why is the Solar Optical Telescope needed; current picture of the Sun's atmosphere and convection zone; scientific problems for the Solar Optical Telescope; a description of the telescope; the facility - science management, contamination control, and accessibility to the instruments; the scientific instruments - a coordinated instrument package for unlocking the Sun's secrets; parameters of the coordinated instrument package; science operations from the Space Shuttle; and the dynamic solar atmosphere.

  5. Design Concept for the Retrofit KAO 1m Robotic Telescope

    NASA Astrophysics Data System (ADS)

    Han, Won-Yong; Mack, Peter; Park, Jang-Hyun; Jin, Ho; Lee, Woo-Baik; Lee, Chung-Uk

    2000-12-01

    Korea Astronomy Observatory (KAO) is working to retrofit its 1m robotic telescope in collaboration with a company (ACE, Astronomical Consultants & Equipment). The telescope system is being totally refurbished to make a fully automatic telescope which can operate in both interactive and fully autonomous robotic modes. Progress has been made in design and manufacturing of the telescope mount, mechanics, and optical performance system tests are being made for re-configured primary and secondary mirrors. The optical system is designed to collect 80% incident light within 0.5 arcsec with f/7.5 Ritchey-Chretien design. The telescope mount is an equatorial fork with a friction drive system. The design allows fully programmable tracking speeds with typical range of 15 arcsec/sec with accuracy of +/-5 arcsec/hour. The mount system has integral pointing model software to correct for refraction, and all mechanical errors and misalignments. The pointing model will permit positioning to better than 30 arcsec RMS within 75o from zenith and 45 arcsec RMS elsewhere on the sky. The software is designed for interactive, remote and robotic modes of operation. In interactive and remote mode the user can manually enter coordinates or retrieve them from a computer file. In robotic mode the telescope controller downloads the coordinates in the order determined by the scheduler. The telescope will be equipped with a CCD camera and will be accessible via the internet.

  6. The Solar Telescope GREGOR

    NASA Astrophysics Data System (ADS)

    Volkmer, R.

    2008-09-01

    During the last years the new 1.5m solar telescope GREGOR was assembled at Izania on Tenerife, Spain. The telescope is designed for high-precision measurements of the magnetic field in the solar photosphere and chromosphere with a resolution of 70km on the Sun. The telescope concept offers also high resolution stellar spectroscopy. The telescope is build by a consortium of the Kiepenheuer-Institut für Sonnenphysik, the Astrophysikalische Institut Potsdam, the Institut für Astrophysik Göttingen, Max-Plank-Institut für Sonnensystemforschung and additional international Partners. The telescope is a complete open structure with active cooled main mirror. High performance post-focus instruments in the visible and near IR wavelength acquire high resolution spectra with 2 dimensional spatial resolution and polarimetric information. The commissioning of the telescope will start in 2008 to allow first science observations at the end of 2009.

  7. The GREGOR Solar Telescope

    NASA Astrophysics Data System (ADS)

    Denker, C.; Lagg, A.; Puschmann, K. G.; Schmidt, D.; Schmidt, W.; Sobotka, M.; Soltau, D.; Strassmeier, K. G.; Volkmer, R.; von der Luehe, O.; Solanki, S. K.; Balthasar, H.; Bello Gonzalez, N.; Berkefeld, T.; Collados Vera, M.; Hofmann, A.; Kneer, F.

    2012-12-01

    The 1.5-meter GREGOR solar telescope is a new facility for high-resolution observations of the Sun. The telescope is located at the Spanish Observatorio del Teide on Tenerife. The telescope incorporates advanced designs for a foldable-tent dome, an open steel-truss telescope structure, and active and passive means to minimize telescope and mirror seeing. Solar fine structure can be observed with a dedicated suite of instruments: a broad-band imaging system, the "GREGOR Fabry-Perot Interferometer", and the "Grating Infrared Spectrograph". All post-focus instruments benefit from a high-order (multi-conjugate) adaptive optics system, which enables observations close to the diffraction limit of the telescope. The inclusion of a spectrograph for stellar activity studies and the search for solar twins expands the scientific usage of the GREGOR to the nighttime domain. We report on the successful commissioning of the telescope until the end of 2011 and the first steps towards science verification in 2012.

  8. The single mirror small size telescope (SST-1M) of the Cherenkov Telescope Array

    NASA Astrophysics Data System (ADS)

    Aguilar, J. A.; Bilnik, W.; Borkowski, J.; Cadoux, F.; Christov, A.; della Volpe, D.; Favre, Y.; Heller, M.; Kasperek, J.; Lyard, E.; Marszałek, A.; Moderski, R.; Montaruli, T.; Porcelli, A.; Prandini, E.; Rajda, P.; Rameez, M.; Schioppa, E., Jr.; Troyano Pujadas, I.; Zietara, K.; Blocki, J.; Bogacz, L.; Bulik, T.; Frankowski, A.; Grudzinska, M.; Idźkowski, B.; Jamrozy, M.; Janiak, M.; Lalik, K.; Mach, E.; Mandat, D.; Michałowski, J.; Neronov, A.; Niemiec, J.; Ostrowski, M.; Paśko, P.; Pech, M.; Schovanek, P.; Seweryn, K.; Skowron, K.; Sliusar, V.; Stawarz, L.; Stodulska, M.; Stodulski, M.; Toscano, S.; Walter, R.; WiÈ©cek, M.; Zagdański, A.

    2016-07-01

    The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). The CTA south array will be composed of about 100 telescopes, out of which about 70 are of SST class, which are optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV. The SST-1M implements a Davies-Cotton optics with a 4 m dish diameter with a field of view of 9°. The Cherenkov light produced in atmospheric showers is focused onto a 88 cm wide hexagonal photo-detection plane, composed of 1296 custom designed large area hexagonal silicon photomultipliers (SiPM) and a fully digital readout and trigger system. The SST-1M camera has been designed to provide high performance in a robust as well as compact and lightweight design. In this contribution, we review the different steps that led to the realization of the telescope prototype and its innovative camera.

  9. Array of CCD's for the 1m. Schmidt telescope

    NASA Astrophysics Data System (ADS)

    Sanchez, G.; Abad, C.; della Prugna, F. A.

    2001-07-01

    We describe the array of CCDs (YIC Camera) attached to the Schmidt Telescope located in the Observatorio Nacional de Llano del Hato, Merida, Venezuela. Currently the camera has 16 CCDs (2048×2048) cooled to below -80C. The camera can be used in drift-scan mode (within 7deg of equator) or guided mode. Two filter mosaics (UBUV and BVRI) and a low-pass filter with a 7000 AA cutoff are available. An objective prism of dispersion 500 AA/mm is also available. This prototype camera was designed for the QUEST project., a collaboration of Yale and Indiana Universities (USA) with the Universidad de los Andes and CIDA (Venezuela). A second phase camera will have 96 CCDs (4096 by 1024). The system has been working since early 1997. Even thought it is still under commisioning, an important quantity of astronomical data have been acquired. Half of the dark time is assigned to the QUEST project, observing in drift-scan mode with the UBUV filter set, or with the objective prism and no filters. The rest of the time is open to projects like the Survey for low luminosity Hx emission-line galaxies (UCM - CIDA), Variability Survey near the Galactic Plane (Yale, CFA, CIDA, Indiana), Catalogo Astrometrico y movimientos para el area de la "Carte du Ciel" zona San Fernando (CIDA - ROA), Solar System Science (ULA - Yale).

  10. Satellite Imaging with Adaptive Optics on a 1 M Telescope

    NASA Astrophysics Data System (ADS)

    Bennet, F.; Price, I.; Rigaut, F.; Copeland, M.

    2016-09-01

    The Research School of Astronomy and Astrophysics at the Mount Stromlo Observatory in Canberra, Australia, have been developing adaptive optic (AO) systems for space situational awareness applications. We report on the development and demonstration of an AO system for satellite imaging using a 1 m telescope. The system uses the orbiting object as a natural guide star to measure atmospheric turbulence, and a deformable mirror to provide an optical correction. The AO system utilised modern, high speed and low noise EMCCD technology on both the wavefront sensor and imaging camera to achieve high performance, achieving a Strehl ratio in excess of 30% at 870 nm. Images are post processed with lucky imaging algorithms to further improve the final image quality. We demonstrate the AO system on stellar targets and Iridium satellites, achieving a near diffraction limited full width at half maximum. A specialised realtime controller allows our system to achieve a bandwidth above 100 Hz, with the wavefront sensor and control loop running at 2 kHz. The AO systems we are developing show how ground-based optical sensors can be used to manage the space environment. AO imaging systems can be used for satellite surveillance, while laser ranging can be used to determine precise orbital data used in the critical conjunction analysis required to maintain a safe space environment. We have focused on making this system compact, expandable, and versatile. We are continuing to develop this platform for other space situational awareness applications such as geosynchronous satellite astrometry, space debris characterisation, satellite imaging, and ground-to-space laser communication.

  11. Reviving astrometry on the McDonald observatory 2.1-m Otto Struve telescope

    NASA Astrophysics Data System (ADS)

    Ries, J.; Riddle, A.

    2014-07-01

    The first regular observations of asteroids at McDonald observatory started in 1950 with a 10-inch telescope as part of the Yerkes-McDonald survey, which was followed by a long lull after its completion in 1952. Astrometric observations resumed in the early 70s using the 2.1-m telescope, but were mainly of faint outer solar system satellites to support the emerging planetary space program. Observation of asteroids was later added to the program in order to refine the fundamental reference frame and to aid Hubble Space Telescope astrometry. Near-Earth Objects (NEOs) have been the main emphasis since 1995 using a 0.76 m telescope, which worked very well while the surveys concentrated on objects 1 km or larger. However, NASA's mission to discover and catalogue NEOs has been extended down to objects 140 m in size. Most of these new NEO candidates are outside the reach of the 0.76-m telescope. In 2011, the Otto Struve telescope has received a new instrument, the Camera for QUasars in EArly uNiverse, or CQUEAN (Park, 2012). The telescope-camera combination allows us to follow up virtually any object discovered by the various NEO search teams, as it provides measurable images of a 19th magnitude source with a single 10 second exposure in the red. The field of view is 4.8' by 4.8', with 0.281 arcsec/pixel resolution, and we can fully sample the point-spread function for precision astrometry. Although this telescope is 75 years old, we are getting circular stellar images for exposures up to 240 seconds with the CQUEAN auto-guider. We obtained images of M71 at three different air masses during two nights in the Sloan i and r filter bands. The σ of the standard coordinate residuals is a little under 0.07 seconds of arc for both cases. We have also looked at the field of view for systematic errors both in direction and magnitude, and we found it to be satisfactorily uniform. The overall quality of our data is improved due to better angular resolution and dome seeing. Based on

  12. Transit & RV Observations of Exoplanets by the 1-m Telescope at Weihai

    NASA Astrophysics Data System (ADS)

    Cao, Chen; Ren, Dayong; Gao, Dongyang; Zhang, Jicheng; Song, Nan; Wang, Feige

    2014-04-01

    By using the 1-m reflecting telescope at Weihai Observatory of Shandong University, the transit observations of seven stars are carried out to accurately estimate the physical parameters of extrasolar planets. Besides, a new high-resolution spectrograph (WES) was installed on this telescope for radial velocity measurements on exoplanets, we will show some preliminary results.

  13. EST: The European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Collados, M.

    2008-09-01

    The European Solar Telescope (EST) is a project for a 4 meter-class ground-based telescope, to be located in the Canary Islands. The project is promoted by the European Association for Solar Telescopes (EAST), a consortium formed by research organizations from 15 European countries. EST will be optimized for studies of magnetic coupling between the deep photosphere and upper chromosphere. The project has been approved for funds by the European Union, within the FP-7 framework, to produce the design of all systems and subsystems of the telescope during the next three years. This includes the optical and optomechanical design of the telescope itself and of the instruments and their control. MCAO will be included in the optical path in a natural way to compensate for atmospheric disturbances in an optimum way. The design of EST will strongly emphasize the use of a large number of visible and near-infrared instruments simultaneously which will influence the telescope design from the very beginning. This communication will center mainly on the scientific objectives that EST will address. Generally speaking, they involve understanding how the magnetic field emerges through the solar surface, interacts with the plasma dynamics to transfer energy between different regions, and finally releases it in the form of heat or as violent events in the solar chromosphere and corona. Among the many topics of interest, one may cite, as described in the EST Science Requirements Document: small-scale flux emergence in quiet sun regions, large-scale magnetic structures, magnetic flux cancellation processes, polar magnetic fields, magnetic topology of the photosphere and chromosphere, conversion of mechanical to magnetic energy in the photosphere, wave propagation from photosphere to chromosphere, energy dissipation in the chromosphere at small and large scales, etc. The present status and future perspectives of the project will also be outlined.

  14. Analysis of the Naval Observatory Flagstaff Station 1-m Telescope using Annular Zernike Polynomials

    DTIC Science & Technology

    2003-01-01

    University in Flag- staff. From 1993 to 2000 he was an optical engineer and manager of the telescope optics group at Keck Observatory on Mauna Kea , Hawaii...Analysis of the Naval Observatory Flagstaff Station 1-m telescope using annular Zernike polynomials Sergio R. Restaino Naval Research Laboratory...Mining and Technology Electrical Engineering Department 801 Leroy Place Socorro, New Mexico 87801 Michael DiVittorio U.S. Naval Observatory Flagstaff

  15. GISOT: a giant solar telescope

    NASA Astrophysics Data System (ADS)

    Hammerschlag, Robert H.; von der Lühe, Oskar F.; Bettonvil, Felix C.; Jägers, Aswin P.; Snik, Frans

    2004-10-01

    A concept is presented for an extremely large high-resolution solar telescope with an aperture of 11 m and diffraction limited for visual wavelengths. The structure of GISOT will be transparent to wind and placed on a transparent stiff tower. For efficient wind flushing, all optics, including the primary mirror, will be located above the elevation axis. The aperture will be of the order of 11 m, not rotatively symmetrical, but of an elongated shape with dimensions 11 x 4 m. It consists of a central on-axis 4 m mirror with on both sides 3 pieces of 2 m mirrors. The optical layout will be kept simple to guarantee quality and minimize stray light. A Coudé room for instruments is planned below the telescope. The telescope will not be housed in a dome-like construction, which interferes with the open principle. Instead the telescope will be protected by a foldable tent construction with a diameter of the order of 30 m, which doesn"t form any obstruction during observations, but can withstand the severe weather circumstances on mountain sites. Because of the nature of the solar scene, extremely high resolution in only one dimension is sufficient to solve many exciting problems in solar physics and in this respect the concept of GISOT is very promising.

  16. Open Principle for Large High-Resolution Solar Telescopes

    NASA Astrophysics Data System (ADS)

    Hammerschlag, Robert H.; Bettonvil, Felix C. M.; Jägers, Aswin P. L.; Sliepen, Guus

    2009-04-01

    Vacuum solar telescopes solve the problem of image deterioration inside the telescope due to refractive index fluctuations of the air heated by the solar light. However, such telescopes have a practical diameter limit somewhat over 1 m. The Dutch Open Telescope (DOT) was the pioneering demonstrator of the open-telescope technology without need of vacuum, now pursued in the German GREGOR. Important ingredients for this technology are primary beam completely open to natural wind flow, stiff but still open design by principal stiff overall geometries in combination with carefully designed joints and completely open-foldable dome constructions based on tensioned strong cloth. Further developments to large sizes are made within the framework of the design study for a European Solar Telescope (EST).

  17. DigiCam: fully digital compact camera for SST-1M telescope

    NASA Astrophysics Data System (ADS)

    Aguilar, J. A.; Bilnik, W.; Bogacz, L.; Bulik, T.; Christov, A.; della Volpe, D.; Dyrda, M.; Frankowski, A.; Grudzinska, M.; Grygorczuk, J.; Heller, M.; Idźkowski, B.; Janiak, M.; Jamrozy, M.; Karczewski, M.; Kasperek, J.; Lyard, E.; Marszałek, A.; Michałowski, J.; Moderski, R.; Montaruli, T.; Neronov, A.; Nicolau-Kukliński, J.; Niemiec, J.; Ostrowski, M.; Paśko, P.; Płatos, Ł.; Prandini, E.; Pruchniewicz, R.; Rafalski, J.; Rajda, P. J.; Rameez, M.; Rataj, M.; Rupiński, M.; Rutkowski, K.; Seweryn, K.; Sidz, M.; Stawarz, Ł.; Stodulska, M.; Stodulski, M.; Tokarz, M.; Toscano, S.; Troyano Pujadas, I.; Walter, R.; Wawer, P.; Wawrzaszek, R.; Wiśniewski, L.; Zietara, K.; Ziółkowski, P.; Żychowski, P.

    2014-08-01

    The single mirror Small Size Telescopes (SST-1M), being built by a sub-consortium of Polish and Swiss Institutions of the CTA Consortium, will be equipped with a fully digital camera with a compact photodetector plane based on silicon photomultipliers. The internal trigger signal transmission overhead will be kept at low level by introducing a high level of integration. It will be achieved by massively deploying state-of-the-art multi-gigabit transceivers, beginning from the ADC flash converters, through the internal data and trigger signals transmission over backplanes and cables, to the camera's server 10Gb/s Ethernet links. Such approach will allow fitting the size and weight of the camera exactly to the SST-1M needs, still retaining the flexibility of a fully digital design. Such solution has low power consumption, high reliability and long lifetime. The concept of the camera will be described, along with some construction details and performance results.

  18. Characterization and commissioning of the SST-1M camera for the Cherenkov Telescope Array

    NASA Astrophysics Data System (ADS)

    Aguilar, J. A.; Bilnik, W.; Błocki, J.; Bogacz, L.; Borkowski, J.; Bulik, T.; Cadoux, F.; Christov, A.; Curyło, M.; della Volpe, D.; Dyrda, M.; Favre, Y.; Frankowski, A.; Grudnik, Ł.; Grudzińska, M.; Heller, M.; Idźkowski, B.; Jamrozy, M.; Janiak, M.; Kasperek, J.; Lalik, K.; Lyard, E.; Mach, E.; Mandat, D.; Marszałek, A.; Medina Miranda, L. D.; Michałowski, J.; Moderski, R.; Montaruli, T.; Neronov, A.; Niemiec, J.; Ostrowski, M.; Paśko, P.; Pech, M.; Porcelli, A.; Prandini, E.; Rajda, P.; Rameez, M.; Schioppa, E., Jr.; Schovanek, P.; Seweryn, K.; Skowron, K.; Sliusar, V.; Sowiński, M.; Stawarz, Ł.; Stodulska, M.; Stodulski, M.; Toscano, S.; Troyano Pujadas, I.; Walter, R.; Wiȩcek, M.; Zagdański, A.; Ziȩtara, K.; Żychowski, P.

    2017-02-01

    The Cherenkov Telescope Array (CTA), the next generation very high energy gamma-rays observatory, will consist of three types of telescopes: large (LST), medium (MST) and small (SST) size telescopes. The SSTs are dedicated to the observation of gamma-rays with energy between a few TeV and a few hundreds of TeV. The SST array is expected to have 70 telescopes of different designs. The single-mirror small size telescope (SST-1 M) is one of the proposed telescope designs under consideration for the SST array. It will be equipped with a 4 m diameter segmented mirror dish and with an innovative camera based on silicon photomultipliers (SiPMs). The challenge is not only to build a telescope with exceptional performance but to do it foreseeing its mass production. To address both of these challenges, the camera adopts innovative solutions both for the optical system and readout. The Photo-Detection Plane (PDP) of the camera is composed of 1296 pixels, each made of a hollow, hexagonal light guide coupled to a hexagonal SiPM designed by the University of Geneva and Hamamatsu. As no commercial ASIC would satisfy the CTA requirements when coupled to such a large sensor, dedicated preamplifier electronics have been designed. The readout electronics also use an innovative approach in gamma-ray astronomy by adopting a fully digital approach. All signals coming from the PDP are digitized in a 250 MHz Fast ADC and stored in ring buffers waiting for a trigger decision to send them to the pre-processing server where calibration and higher level triggers will decide whether the data are stored. The latest generation of FPGAs is used to achieve high data rates and also to exploit all the flexibility of the system. As an example each event can be flagged according to its trigger pattern. All of these features have been demonstrated in laboratory measurements on realistic elements and the results of these measurements will be presented in this contribution.

  19. The New Control System for the 1 m Cassegrain Telescope at the Hoher List Observatory

    NASA Astrophysics Data System (ADS)

    Hirsch, P.; Reif, K.; Müller, Ph.

    The 1m Cassegrain (f/14.5) telescope of the Hoher List Observatory -- operated by the Sternwarte of Bonn University -- is the largest instrument on site. It was built in 1965 and its ancient electro-mechanical control had been in use until the end of last year. During the course of the last year, a new computer based control system has been developed in order to improve the pointing/tracking performance and as the basic step towards remote control and maintenance. It provides corrections for various effects, e.g. refraction, polar motion, and mechanical imperfections - -- which could not be addressed by the old control system. The new system is operational since the end of 1999 in preliminary form. The telescope control system is based on high performance encoders and general purpose industrial automation motor control units. A CAN bus connects the motor control (and eventually autoguider and dome control) units to a Linux PC running the control software. This control PC is integrated in the Hoher List LAN together with other instrumentation control and data reduction computers. The poster explains the system design and describes the current status with results from pointing and tracking tests obtained using a first telescope pointing model.

  20. Construction of the Advanced Technology Solar Telescope

    NASA Astrophysics Data System (ADS)

    Rimmele, T. R.; Keil, S.; McMullin, J.; Knölker, M.; Kuhn, J. R.; Goode, P. R.; Rosner, R.; Casini, R.; Lin, H.; Tritschler, A.; Wöger, F.; ATST Team

    2012-12-01

    The 4m Advance Technology Solar Telescope (ATST) will be the most powerful solar telescope and the world's leading ground-based resource for studying solar magnetism that controls the solar wind, flares, coronal mass ejections and variability in the Sun's output. The project has entered its construction phase. Major subsystems have been contracted. As its highest priority science driver ATST shall provide high resolution and high sensitivity observations of the dynamic solar magnetic fields throughout the solar atmosphere, including the corona at infrared wavelengths. With its 4m aperture, ATST will resolve features at 0.″03 at visible wavelengths and obtain 0.″1 resolution at the magnetically highly sensitive near infrared wavelengths. A high order adaptive optics system delivers a corrected beam to the initial set of state-of-the-art, facility class instrumentation located in the Coudé laboratory facility. The initial set of first generation instruments consists of five facility class instruments, including imagers and spectro-polarimeters. The high polarimetric sensitivity and accuracy required for measurements of the illusive solar magnetic fields place strong constraints on the polarization analysis and calibration. Development and construction of a four-meter solar telescope presents many technical challenges, including thermal control of the enclosure, telescope structure and optics and wavefront control. A brief overview of the science goals and observational requirements of the ATST will be given, followed by a summary of the design status of the telescope and its instrumentation, including design status of major subsystems, such as the telescope mount assembly, enclosure, mirror assemblies, and wavefront correction

  1. The formation of protostellar disks. I - 1 M(solar)

    NASA Technical Reports Server (NTRS)

    Yorke, Harold W.; Bodenheimer, Peter; Laughlin, Gregory

    1993-01-01

    Hydrodynamical calculations of the collapse of an axisymmetric, rotating one solar mass protostellar cloud, including the effects of radiative transfer and radiative acceleration but without magnetic fields, are presented. The results include calculations of infrared protostellar spectra as a function of time and viewing angle. A numerical algorithm involving explicit nested grids is used to resolve the region of initial disk formation and at the same time to include the outer regions in the calculation. The central part of the protostar is modeled approximately. Initial conditions are systematically varied to investigate their influence on the evolution and final configuration of central star plus circumstellar disk. The initial state for the standard case is a centrally condensed molecular cloud core of one solar mass with a mean density of 8 x 10 exp -18 g/cu cm and a specific angular momentum at the outer edge of 7 x 10 exp 20 sq cm/s. The collapse is followed for 8 x 10 exp 4 yr, at which point 0.45 solar mass is contained in a rapidly rotating central object and most of the remainder in a surrounding equilibrium disk. The stability of this final structure is qualitatively analyzed.

  2. Binary star speckle measurements during 1992-1997 from the SAO 6-m and 1-m telescopes in Zelenchuk

    NASA Astrophysics Data System (ADS)

    Balega, I. I.; Balega, Y. Y.; Maksimov, A. F.; Pluzhnik, E. A.; Shkhagosheva, Z. U.; Vasyuk, V. A.

    1999-12-01

    We present the results of speckle interferometric measurements of binary stars made with the television photon-counting camera at the 6-m Big Azimuthal Telescope (BTA) and 1-m telescope of the Special Astrophysical Observatory (SAO) between August 1992 and May 1997. The data contain 89 observations of 62 star systems on the large telescope and 21 on the smaller one. For the 6-m aperture 18 systems remained unresolved. The measured angular separation ranged from 39 mas, two times above the BTA diffraction limit, to 1593 mas.

  3. Science with the solar optical telescope

    NASA Technical Reports Server (NTRS)

    Jordan, S. D.; Hogan, G. D.

    1984-01-01

    The Solar Optical Telescope (SOT) is designed to provide the solar physics community with the data necessary for solving several fundamental problems in the energetics and dynamics of the solar atmosphere. Among these problems are questions on the origin and evolution of the sun's magnetic field, heating of the outer solar atmosphere, and sources of the solar wind in the lower lying regions of the outer atmosphere. The SOT will be built under the management of NASA's Goddard Space Flight Center, with science instruments provided by teams led by Principal Investigators. The telescope will be built by the Perkin-Elmer Corporation, and the science instruments selected for the first flight will be provided by the Lockheed Palo Alto Research Laboratory (LPARL) and the California Institute of Technology, with actual construction of a combined science instrument taking place at the LPARL. The SOT has a 1.3-meter-diameter primary mirror that will be capable of achieving diffraction-limited viewing in the visible of 0.1 arc-second. This dimension is less than a hydrodynamic scale-height or a mean-free-path of a continuum photon in the solar atmosphere. Image stability will be achieved by a control system in the telescope, which moves both the primary and tertiary mirrors in tandem, and will be further enhanced by a correlation tracker in the combined science instrument. The SOT Facility is currently scheduled for its first flight on Spacelab at the beginning of the 1990's.

  4. Solar optical telescope primary mirror controller

    NASA Technical Reports Server (NTRS)

    Brown, R. J.; Liu, D.

    1980-01-01

    The development of a technique to control the articulated primary mirror (APM) of the solar optical telescope (SOT) is discussed. Program results indicate that a single, all digital controller has sufficient capability to totally handle the computational requirements for control of the SOT APM.

  5. Solar System Science with Robotic Telescopes

    NASA Astrophysics Data System (ADS)

    Lister, T. A.

    2012-04-01

    An increasing number of sky surveys is already on-line or soon will be, leading to a large boost in the detection of Solar System objects of all types. For Near-Earth Objects (NEOs) that could potentially hit the Earth, timely follow-up is essential. I describe the development of an automated system which responds to new detections of NEOs from Pan-STARRS and automatically observes them with the LCOGT telescopes. I present results from the first few months of operation, and plans for the future with the 6-site, 40-telescope global LCOGT Network.

  6. High precision tracking method for solar telescopes

    NASA Astrophysics Data System (ADS)

    Guo, Jingjing; Yang, Yunfei; Feng, Song; Ji, Kanfan; Lin, Jiaben; Zeng, Zhen; Wang, Bingxiang

    2016-07-01

    A high-precision real-time tracking method for solar telescopes was introduced in this paper based on the barycenter of full-disk solar images algorithm. To make sure the calculation was accurate and reliable, a series of strictly logic limits were set, such as setting gray threshold, judging the displacement of the barycenter and measuring the deviation from a perfect disk. A closed-loop control system was designed in the method. We located the barycenter of the full-disk images which recorded by large array CCD image sensor in real time and eliminate noise caused by bad weather, such as clouds and fog. The displacement of the barycenter was analyzed and transferred into control signal drove the motor to adjust the axis of telescope. An Ethernet interface was also provided for remote control. In the observation, the precision of this new method was better than 1″/30 minutes.

  7. Solar Rejection Filter for Large Telescopes

    NASA Technical Reports Server (NTRS)

    Hemmati, Hamid; Lesh, James

    2009-01-01

    To reject solar radiation photons at the front aperture for large telescopes, a mosaic of large transmission mode filters is placed in front of the telescope or at the aperture of the dome. Filtering options for effective rejection of sunlight include a smaller filter down-path near the focus of the telescope, and a large-diameter filter located in the front of the main aperture. Two types of large filters are viable: reflectance mode and transmittance mode. In the case of reflectance mode, a dielectric coating on a suitable substrate (e.g. a low-thermal-expansion glass) is arranged to reflect only a single, narrow wavelength and to efficiently transmit all other wavelengths. These coatings are commonly referred to as notch filter. In this case, the large mirror located in front of the telescope aperture reflects the received (signal and background) light into the telescope. In the case of transmittance mode, a dielectric coating on a suitable substrate (glass, sapphire, clear plastic, membrane, and the like) is arranged to transmit only a single wavelength and to reject all other wavelengths (visible and near IR) of light. The substrate of the large filter will determine its mass. At first glance, a large optical filter with a diameter of up to 10 m, located in front of the main aperture, would require a significant thickness to avoid sagging. However, a segmented filter supported by a structurally rugged grid can support smaller filters. The obscuration introduced by the grid is minimal because the total area can be made insignificant. This configuration can be detrimental to a diffraction- limited telescope due to diffraction effects at the edges of each sub-panel. However, no discernable degradation would result for a 20 diffraction-limit telescope (a photon bucket). Even the small amount of sagging in each subpanel should have minimal effect in the performance of a non-diffraction limited telescope because the part has no appreciable optical power. If the

  8. Solar rejection for an orbiting telescope

    NASA Technical Reports Server (NTRS)

    Rehnberg, J. D.

    1975-01-01

    The present work discusses some of the constraints that the optical designer must deal with in optimizing spaceborne sensors that must look at or near the sun. Analytical techniques are described for predicting the effects of stray radiation from sources such as mirror scatter, baffle scatter, diffraction, and ghost images. In addition, the paper describes a sensor design that has been flown on the Apollo Telescope Mount (Skylab) to aid astronauts in locating solar flares. In addition to keeping stray radiation to a minimum, the design had to be nondegradable by the direct solar heat load.

  9. The Advanced Technology Solar Telescope: beginning construction of the world's largest solar telescope

    NASA Astrophysics Data System (ADS)

    Rimmele, T. R.; Wagner, J.; Keil, S.; Elmore, D.; Hubbard, R.; Hansen, E.; Warner, M.; Jeffers, P.; Phelps, L.; Marshall, H.; Goodrich, B.; Richards, K.; Hegwer, S.; Kneale, R.; Ditsler, J.

    2010-07-01

    The 4m Advance Technology Solar Telescope (ATST) will be the most powerful solar telescope and the world's leading ground-based resource for studying solar magnetism that controls the solar wind, flares, coronal mass ejections and variability in the Sun's output. The project has successfully passed its final design review and the Environmental Impact Study for construction of ATST on Haleakala, Maui, HI has been concluded in December of 2009. The project is now entering its construction phase. As its highest priority science driver ATST shall provide high resolution and high sensitivity observations of the dynamic solar magnetic fields throughout the solar atmosphere, including the corona at infrared wavelengths. With its 4 m aperture, ATST will resolve features at 0."03 at visible wavelengths and obtain 0."1 resolution at the magnetically highly sensitive near infrared wavelengths. A high order adaptive optics system delivers a corrected beam to the initial set of state-of-the-art, facility class instrumentation located in the coudé laboratory facility. The initial set of first generation instruments consists of five facility class instruments, including imagers and spectropolarimeters. The high polarimetric sensitivity and accuracy required for measurements of the illusive solar magnetic fields place strong constraints on the polarization analysis and calibration. Development and construction of a fourmeter solar telescope presents many technical challenges, including thermal control of the enclosure, telescope structure and optics and wavefront control. A brief overview of the science goals and observational requirements of the ATST will be given, followed by a summary of the design status of the telescope and its instrumentation, including design status of major subsystems, such as the telescope mount assembly, enclosure, mirror assemblies, and wavefront correction

  10. Mechanical design of the solar telescope GREGOR

    NASA Astrophysics Data System (ADS)

    Volkmer, R.; Eisenträger, P.; Emde, P.; Fischer, A.; von der Lühe, O.; Nicklas, H.; Soltau, D.; Schmidt, W.; Weis, U.

    2012-11-01

    The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5-meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air-conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013.

  11. The Advanced Technology Solar Telescope enclosure

    NASA Astrophysics Data System (ADS)

    Phelps, L.; Barr, J.; Dalrymple, N.; Fraser, M.; Hubbard, R.; Wagner, J.; Warner, M.

    2006-06-01

    Telescope enclosure design is based on an increasingly standard set of criteria. Enclosures must provide failsafe protection in a harsh environment for an irreplaceable piece of equipment; must allow effective air flushing to minimize local seeing while still attenuating wind-induced vibration of the telescope; must reliably operate so that the dome is never the reason for observatory down time; must provide access to utilities, lifting devices and support facilities; and they must be affordable within the overall project budget. The enclosure for the Advanced Technology Solar Telescope (ATST) has to satisfy all these challenging requirements plus one more. To eliminate so-called external dome seeing, the exterior surfaces of the enclosure must be maintained at or just below ambient air temperature while being subjected to the full solar loading of an observing day. Further complicating the design of the ATST enclosure and support facilities are the environmental sensitivities and high construction costs at the selected site - the summit of Haleakala on the island of Maui, Hawaii. Previous development work has determined an appropriate enclosure shape to minimize solar exposure while allowing effective interior flushing, and has demonstrated the feasibility of controlling the exterior skin temperature with an active cooling system. This paper presents the evolution of the design since site selection and how the enclosure and associated thermal systems have been tailored to the particular climatic and terrain conditions of the site. Also discussed are load-reduction strategies that have been identified through thermal modeling, CFD modeling, and other analyses to refine and economize the thermal control systems.

  12. Origins Space Telescope: Solar System Science

    NASA Astrophysics Data System (ADS)

    Wright, Edward L.; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its imagers and spectrographs will enable a variety of surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu.In the Solar System, OST will provide km/sec resolution on lines from planet, moons and comets. OST will measure molecular abundances and isotope ratios in planets and comets. OST will be able to do continuum surveys for faint moving sources such as Kuiper Belt Objects, enabling a census of smaller objects in the Kuiper Belt. If the putative Planet IX is massive enough to be self-luminous, then OST will be able to detect it out to thousands of AU from the Sun.

  13. New life for the THEMIS solar telescope

    NASA Astrophysics Data System (ADS)

    Gelly, Bernard; Langlois, Maud; Moretto, Gil; Douet, Richard; Lopez Ariste, Arturo; Tallon, Michel; Thiébaut, Eric; Geyskens, Nicolas; Lorgeoux, Guillaume; Léger, Johnathan; Le Men, Claude

    2016-07-01

    The THEMIS solar telescope is building a classical adaptive optics (AO) system to be operating on the Sun in 2017. To make compatible its excellent dual beam spectropolarimetric features with the AO also requires a major refurbishment of the relay optics starting at the M2 and down to the spectrograph entrance. This paper presents the design parameters and expected performances of our AO system, and explains why and how we intend to control to a few percent the Mueller matrix of the whole optical path from the prime focus to the spectropolarimetric cameras. This project is co-funded by the European Union SOLARNET Project Ref.:312495, and the Centre National de la Recherche Scientifique.

  14. Daniel K. Inouye Solar Telescope system safety

    NASA Astrophysics Data System (ADS)

    Hubbard, Robert P.; Bulau, Scott E.; Shimko, Steve; Williams, Timothy R.

    2014-08-01

    System safety for the Daniel K. Inouye Solar Telescope (DKIST) is the joint responsibility of a Maui-based safety team and the Tucson-based systems engineering group. The DKIST project is committed to the philosophy of "Safety by Design". To that end the project has implemented an aggressive hazard analysis, risk assessment, and mitigation system. It was initially based on MIL-STD-882D, but has since been augmented in a way that lends itself to direct application to the design of our Global Interlock System (GIS). This was accomplished by adopting the American National Standard for Industrial Robots and Robot Systems (ANSI/RIA R15.06) for all identified hazards that involve potential injury to personnel. In this paper we describe the details of our augmented hazard analysis system and its use by the project. Since most of the major hardware for the DKIST (e.g., the enclosure, and telescope mount assembly) has been designed and is being constructed by external contractors, the DKIST project has required our contractors to perform a uniform hazard analysis of their designs using our methods. This paper also describes the review and follow-up process implemented by the project that is applied to both internal and external subsystem designs. Our own weekly hazard analysis team meetings have now largely turned to system-level hazards and hazards related to specific tasks that will be encountered during integration, test, and commissioning and maintenance operations. Finally we discuss a few lessons learned, describing things we might do differently if we were starting over today.

  15. A retrospective of the GREGOR solar telescope in scientific literature

    NASA Astrophysics Data System (ADS)

    Denker, C.; von der Lühe, O.; Feller, A.; Arlt, K.; Balthasar, H.; Bauer, S.-M.; Bello González, N.; Berkefeld, Th.; Caligari, P.; Collados, M.; Fischer, A.; Granzer, T.; Hahn, T.; Halbgewachs, C.; Heidecke, F.; Hofmann, A.; Kentischer, T.; Klva{ňa, M.; Kneer, F.; Lagg, A.; Nicklas, H.; Popow, E.; Puschmann, K. G.; Rendtel, J.; Schmidt, D.; Schmidt, W.; Sobotka, M.; Solanki, S. K.; Soltau, D.; Staude, J.; Strassmeier, K. G.; Volkmer, R.; Waldmann, T.; Wiehr, E.; Wittmann, A. D.; Woche, M.

    2012-11-01

    In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post-focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer-reviewed journals and conference proceedings also provides the ``historical'' context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes.

  16. Photographic films for the Multi-Spectral Solar Telescope Array

    NASA Technical Reports Server (NTRS)

    Hoover, Richard B.; Walker, Arthur B. C., Jr.; Deforest, Craig E.; Allen, Maxwell J.; Lindblom, Joakim F.; Gilliam, Lou; November, Larry; Brown, Todd; Dewan, Clyde A.

    1992-01-01

    The rocketborne Multi-Spectral Solar Telescope Array (MSSTA) uses an array of Ritchey-Chretien, Cassegrain, and Herschelian telescopes to produce ultrahigh-resolution full-disk images of the sun within the soft X-ray, EUV, and FUV ranges. Such imaging of the solar disk and corona out to several solar radii placed great demands on the MSSTA's data storage capabilities; in addition, its photographic films required very low outgassing rates. Results are presented from calibration tests conducted on the MSSTA's emulsions, based on measurements at NIST's synchrotron facility.

  17. SUNRISE: a balloon-borne telescope for high resolution solar observations in the visible and UV

    NASA Astrophysics Data System (ADS)

    Solanki, Sami K.; Gandorfer, Achim M.; Schuessler, Manfred; Curdt, W.; Lites, Bruce W.; Martinez-Pillet, Valentin; Schmidt, Wolfgang; Title, Alan M.

    2003-02-01

    Sunrise is a light-weight solar telescope with a 1 m aperture for spectro-polarimetric observations of the solar atmosphere. The telescope is planned to be operated during a series of long-duration balloon flights in order to obtain time series of spectra and images at the diffraction-limit and to study the UV spectral region down to ~200 nm, which is not accessible from the ground. The central aim of Sunrise is to understand the structure and dynamics of the magnetic field in the solar atmosphere. Through its interaction with the convective flow field, the magnetic field in the solar photosphere develops intense field concentrations on scales below 100 km, which are crucial for the dynamics and energetics of the whole solar atmosphere. In addition, Sunrise aims to provide information on the structure and dynamics of the solar chromosphere and on the physics of solar irradiance changes. Sunrise is a joint project of the Max-Planck-Institut fuer Aeronomie (MPAe), Katlenburg-Lindau, with the Kiepenheuer-Institut fuer Sonnenphysik (KIS), Freiburg, the High-Altitude Observatory (HAO), Boulder, the Lockheed-Martin Solar and Astrophysics Lab. (LMSAL), Palo Alto, and the Instituto de Astrofi sica de Canarias, La Laguna, Tenerife. In addition, there are close contacts with associated scientists from a variety of institutes.

  18. World coordinate information for the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Mayer, Chris; Wampler, Steve; Goodrich, Bret

    2016-07-01

    It is a top level science requirement that data from the Daniel K Inouye Solar Telescope (DKIST) is archived and made available to the world wide astronomical community. Data from DKIST must contain sufficient meta-data to allow proper post processing. This paper describes how the Telescope Control System (TCS), Wavefront Correction Control System (WCCS) and individual instrument control systems work together with the camera systems to provide the world coordinate information (WCI) meta-data for 2-d imaging detectors.

  19. The James Webb Space Telescope: Solar System Science

    NASA Astrophysics Data System (ADS)

    Hines, Dean C.; Hammel, H. B.; Lunine, J. I.; Milam, S. N.; Kalirai, J. S.; Sonneborn, G.

    2013-01-01

    The James Webb Space Telescope (JWST) is poised to revolutionize many areas of astrophysical research including Solar System Science. Scheduled for launch in 2018, JWST is ~100 times more powerful than the Hubble and Spitzer observatories. It has greater sensitivity, higher spatial resolution in the infrared, and significantly higher spectral resolution in the mid infrared. Imaging and spectroscopy (both long-slit and integral-field) will be available across the entire 0.6 - 28.5 micron wavelength range. Herein, we discuss the capabilities of the four science instruments with a focus on Solar System Science, including instrument modes that enable observations over the huge range of brightness presented by objects within the Solar System. The telescope is being built by Northrop Grumman Aerospace Systems for NASA, ESA, and CSA. JWST development is led by NASA's Goddard Space Flight Center. The Space Telescope Science Institute (STScI) is the Science and Operations Center (S&OC) for JWST.

  20. Analysis of wavefront reconstruction in 8 meter ring solar telescope

    NASA Astrophysics Data System (ADS)

    Dai, Yichun; Jin, Zhenyu

    2016-07-01

    Chinese Giant Solar Telescope (CGST) is the next generation infrared and optical solar telescope of China, which is proposed and pushed by the solar astronomy community of China and listed into the National Plans of Major Science and Technology Infrastructures. CGST is currently proposed to be an 8 meter Ring Solar Telescope (RST) with width of 1 meter, the hollow and symmetric structure of such an annular aperture facilitates the thermal control and high precision magnetic field measurement for a solar telescope. Adaptive optics (AO) is an indispensable tool of RST to obtain diffraction limited observations. How to realize AO involved wavefront sensing and correcting, and the degree of compensating in a narrow annular aperture is the primary problem of AO implementation of RST. Wavefront reconstruction involved problems of RST are first investigated and discussed in this paper using end to end simulation based on Shack-Hartmann wavefront sensing (SHWFS). The simulation results show that performance of zonal reconstruction with measurement noise no more than 0.05 arc sec can meets the requirement of RST for diffraction-limited imaging at wavelength of 1μm, which satisfies most science cases of RST in near infrared waveband.

  1. NST: Thermal Modeling for a Large Aperture Solar Telescope

    NASA Astrophysics Data System (ADS)

    Coulter, Roy

    2011-05-01

    Late in the 1990s the Dutch Open Telescope demonstrated that internal seeing in open, large aperture solar telescopes can be controlled by flushing air across the primary mirror and other telescope structures exposed to sunlight. In that system natural wind provides a uniform air temperature throughout the imaging volume, while efficiently sweeping heated air away from the optics and mechanical structure. Big Bear Solar Observatory's New Solar Telescope (NST) was designed to realize that same performance in an enclosed system by using both natural wind through the dome and forced air circulation around the primary mirror to provide the uniform air temperatures required within the telescope volume. The NST is housed in a conventional, ventilated dome with a circular opening, in place of the standard dome slit, that allows sunlight to fall only on an aperture stop and the primary mirror. The primary mirror is housed deep inside a cylindrical cell with only minimal openings in the side at the level of the mirror. To date, the forced air and cooling systems designed for the NST primary mirror have not been implemented, yet the telescope regularly produces solar images indicative of the absence of mirror seeing. Computational Fluid Dynamics (CFD) analysis of the NST primary mirror system along with measurements of air flows within the dome, around the telescope structure, and internal to the mirror cell are used to explain the origin of this seemingly incongruent result. The CFD analysis is also extended to hypothetical systems of various scales. We will discuss the results of these investigations.

  2. The National Large Solar Telescope (NLST) of India

    NASA Astrophysics Data System (ADS)

    Hasan, S. S.

    2012-12-01

    The Indian National Large Solar Telescope (NLST) will be a state-of-the-art 2-m class telescope for carrying out high-resolution studies in the solar atmosphere. Recent numerical simulations suggest that crucial physical processes like vortex flow, dissipation of magnetic fields and the generation of MHD waves can occur efficiently over length scales of tens of kilometers. Current telescopes are unable to resolve solar feature to this level at visible wavelengths. NLST will not only achieve good spatial resolution, but will also have a high photon throughput in order to carry out spectropolarimetric observations to accurately measure vector magnetic fields in the solar atmosphere with a good signal to noise ratio. The main science goals of NLST include: a) Magnetic field generation and the solar cycle; b) Dynamics of magnetized regions; c) Helioseismology; d) Long term variability; e) Energetic phenomena and Activity; and f) Night time astronomy. The optical design of the telescope is optimized for high optical throughput and uses a minimum number of optical elements. A high order adaptive optics system is integrated as part of the design that works with a modest Fried's parameter of 7-cm to give diffraction limited performance. The telescope will be equipped with a suite of post-focus instruments including a high resolution spectrograph and a polarimeter. NLST will also be used for carrying out stellar observations during the night. The mechanical design of the telescope, building, and the innovative dome takes advantage of the natural air flush which will help to keep the open telescope in temperature equilibrium. Critical to the successful implementation of NLST is the selection of a site with optimum atmospheric properties, such as the number of sunshine hours and good "seeing" over long periods. A site characterization programme carried over several years has established the existence of suitable sites in the Ladakh region. After its completion, currently

  3. High resolution reconstruction of solar prominence images observed by the New Vacuum Solar Telescope

    NASA Astrophysics Data System (ADS)

    Xiang, Yong-yuan; Liu, Zhong; Jin, Zhen-yu

    2016-11-01

    A high resolution image showing fine structures is crucial for understanding the nature of solar prominence. In this paper, high resolution imaging of solar prominence on the New Vacuum Solar Telescope (NVST) is introduced, using speckle masking. Each step of the data reduction especially the image alignment is discussed. Accurate alignment of all frames and the non-isoplanatic calibration of each image are the keys for a successful reconstruction. Reconstructed high resolution images from NVST also indicate that under normal seeing condition, it is feasible to carry out high resolution observations of solar prominence by a ground-based solar telescope, even in the absence of adaptive optics.

  4. Daniel K. Inouye Solar Telescope optical alignment plan

    NASA Astrophysics Data System (ADS)

    Sekulic, Predrag; Liang, Chen; Gonzales, Kerry; Hubbard, Robert P.; Craig, Simon C.

    2016-07-01

    The Daniel K. Inouye Solar Telescope (DKIST) is a 4-meter solar telescope under construction at Haleakala, Hawaii. The challenge of the DKIST optical alignment is the off-axis Gregorian configuration based on an Altitude-Azimuth mount, the independently-rotating Coudé platform and the large number of relay mirrors. This paper describes the optical alignment plan of the complete telescope, including the primary 4.24-m diameter off-axis secondary mirror, the secondary 620 mm diameter off-axis mirror, the transfer optics and the Coudé optics feeding the wavefront correction system and the science instruments. A number of accurate metrology instruments will be used to align the telescope and to reach the performances, including a laser tracker for initial positioning, a theodolite for accurate tilt alignment, a Coordinate Measurement Machine (CMM) arm for local alignment in the Coudé laboratory, and a Shack-Hartmann wavefront sensor to characterize the aberrations by measuring selected target stars. The wavefront will be characterized at the primary focus, the Gregorian focus, the intermediate focus and at the telescope focal plane. The laser tracker will serve also to measure the mirrors positions as function of Altitude angle due to the Telescope Mount Assembly (TMA) structure deflection. This paper describes also the method that will be used to compute the compensating mirrors shift and tilt needed to correct the residual aberrations and position of the focal plane.

  5. Daniel K. Inouye Solar Telescope systems engineering update

    NASA Astrophysics Data System (ADS)

    Hubbard, Robert; Craig, Simon; Kneale, Ruth

    2016-08-01

    The Daniel K. Inouye Solar Telescope (DKIST), formerly the Advanced Technology Solar Telescope (ATST), is now in its sixth year of construction. During the two years that have elapsed since our last systems engineering update we have been through factory acceptance of several major subsystems including the enclosure, telescope mount assembly, and the primary mirror. With these major milestones behind us, site assembly in progress, and with the integration, test, and commissioning phase about to begin, we will discuss what has been working well in terms of DKIST systems engineering processes along with some things we could have done better and would do differently if given another chance. The paper examines examples of successes including full-scale factory assembly of major mechanical components and some less optimum outcomes. We explore the reasons for success or failure, including the early delivery and level of detail in factory acceptance test procedures.

  6. G-133: A soft X ray solar telescope

    NASA Astrophysics Data System (ADS)

    Williams, Memorie K.; Campbell, Branton; Roming, Peter W. A.; Spute, Mark K.; Moody, J. Ward

    1992-10-01

    The GOLDHELOX Project, NASA payload number G-133, is a robotic soft x ray solar telescope designed and built by an organization of undergraduate students. The telescope is designed to observe the sun at a wavelength of 171 to 181 A. Since we require observations free from atmospheric interference, the telescope will be launched in a NASA Get-Away-Special (GAS) canister with a Motorized Door Assembly (MDA). In this paper we primarily discuss the most important elements of the telescope itself. We also elaborate on some of the technical difficulties associated with doing good science in space on a small budget (about $100,000) and mention ways in which controlling the instrument environment has reduced the complexity of the system and thus saved us money.

  7. G-133: A soft x ray solar telescope

    NASA Technical Reports Server (NTRS)

    Williams, Memorie K.; Campbell, Branton; Roming, Peter W. A.; Spute, Mark K.; Moody, J. Ward

    1992-01-01

    The GOLDHELOX Project, NASA payload number G-133, is a robotic soft x ray solar telescope designed and built by an organization of undergraduate students. The telescope is designed to observe the sun at a wavelength of 171 to 181 A. Since we require observations free from atmospheric interference, the telescope will be launched in a NASA Get-Away-Special (GAS) canister with a Motorized Door Assembly (MDA). In this paper we primarily discuss the most important elements of the telescope itself. We also elaborate on some of the technical difficulties associated with doing good science in space on a small budget (about $100,000) and mention ways in which controlling the instrument environment has reduced the complexity of the system and thus saved us money.

  8. Telescope beam-profile diagnostics and the solar limb

    NASA Technical Reports Server (NTRS)

    Lindsey, Charles A.; Roellig, Thomas L.

    1991-01-01

    The basic method is described for determining the solar limb brightness profile properly corrected for spurious limb darkening caused by the far wings of the resolving beams encountered in large far-infrared and radio telescopes. When the far wings of the beam can be independently measured this problem is usually amenable to standard deconvolution procedures. Under a broad range of well-defined cases, solutions to the deconvolution problem are unique to within the discrimination provided by the core of the beam profile. The theory is applied to solar limb scans made recently on the James Clerk Maxwell Telscope to show solar limb brightening in 850 micron radiation.

  9. Telescope beam-profile diagnostics and the solar limb

    SciTech Connect

    Lindsey, C.A.; Roellig, T.L. NASA, Ames Research Center, Moffett Field, CA )

    1991-07-01

    The basic method is described for determining the solar limb brightness profile properly corrected for spurious limb darkening caused by the far wings of the resolving beams encountered in large far-infrared and radio telescopes. When the far wings of the beam can be independently measured this problem is usually amenable to standard deconvolution procedures. Under a broad range of well-defined cases, solutions to the deconvolution problem are unique to within the discrimination provided by the core of the beam profile. The theory is applied to solar limb scans made recently on the James Clerk Maxwell Telscope to show solar limb brightening in 850 micron radiation. 16 refs.

  10. Investigation of small solar system objects with the space telescope

    NASA Technical Reports Server (NTRS)

    Morrison, D.

    1979-01-01

    The application of the space telescope (ST) to study small objects in the solar system in order to understand the birth and the early evolution of the solar system is discussed. The upper size limit of the small bodies is defined as approximately 5000 km and includes planetary satellites, planetary rings, asteroids, and comets.The use of the astronomical instruments aboard the ST, such as the faint object camera, ultraviolet and infrared spectrometers, and spectrophotometers, to study the small solar system objects is discussed.

  11. Planning the 8-meter Chinese Giant Solar Telescope

    NASA Astrophysics Data System (ADS)

    Beckers, Jacques M.; Liu, Z.; Deng, Y.; Ji, H.

    2013-07-01

    The Chinese Giant Solar Telescope (CGST) will be a diffraction limited solar telescope optimized for the near-infrared (NIR) spectral region (0.8 - 2.5 microns). Its diffraction limit will be reached by the incorporation of Multi-Conjugate Adaptive Optics (MCAO) enhanced by image restoration techniques to achieve uniform (u.v) plane coverage over the angular spatial frequency region allowed by its 8-meter aperture. Thus it will complement the imaging capabilities of 4-meter telescopes being planned elsewhere which are optimized for the visible (VIS) spectral region (300 - 1000 nm) In the NIR spectral regions the CGST will have access to unique spectral features which will improve the diagnostics of the solar atmosphere. These include the CaII lines near 860 nm , the HeI lines near 1083 nm, the 1074 nm FeXIII coronal lines, the large Zeeman-split FeI line at 1548 nm, and (v) the H- continuum absorption minimum at 1.6 micron. Especially in sunspot umbrae the simultaneous observation of continua and lines across the NIR spectral range will cover a substantial depth range in the solar atmosphere. Of course the mid- and far- infrared regions are also available for unequalled high-angular resolution solar observations, for example, in the Hydrogen Bracket lines, CO molecular bands, and the MgI emission line at 12.3 microns. The CGST is a so-called ring telescope in which the light is captured by a 1 meter wide segmented ring or by a ring of 7 smaller off-axis aperture telescopes. The open central area of the telescope is large. The advantages of such a ring configuration is that (a) it covers all the spatial frequencies out to those corresponding to its outer diameter, (b) its circular symmetry makes it polarization neutral, (c) its large central hole helps thermal control, and (d) it provides ample space for the MCAO system and instrumentation in the Gregorian focus. Even though optimized for the NIR, we expect to use the CGST also at visible wavelengths in the so

  12. Design progress of the solar UV-Vis-IR telescope (SUVIT) aboard SOLAR-C

    NASA Astrophysics Data System (ADS)

    Katsukawa, Y.; Ichimoto, K.; Suematsu, Y.; Hara, H.; Kano, R.; Shimizu, T.; Matsuzaki, K.

    2013-09-01

    We present a design progress of the Solar UV-Vis-IR Telescope (SUVIT) aboard the next Japanese solar mission SOLAR-C. SUVIT has an aperture diameter of ~1.4 m for achieving spectro-polarimetric observations with spatial and temporal resolution exceeding the Hinode Solar Optical Telescope (SOT). We have studied structural and thermal designs of the optical telescope as well as the optical interface between the telescope and the focal plane instruments. The focal plane instruments are installed into two packages, filtergraph and spectrograph packages. The spectropolarimeter is the instrument dedicated to accurate polarimetry in the three spectrum windows at 525 nm, 854 nm, and 1083 nm for observing magnetic fields at both the photospheric and chromospheric layers. We made optical design of the spectrograph accommodating the conventional slit spectrograph and the integral field unit (IFU) for two-dimensional coverage. We are running feasibility study of the IFU using fiber arrays consisting of rectangular cores.

  13. First Light Infrared Observations with the 1.6 Meter Solar Telescope in Big Bear: Origins of Space Weather Telescope

    DTIC Science & Technology

    2012-08-16

    later transported toward the corona . 2)We investigated properties of magnetic fields in nearly 400 solar active regions. Time profiles of...1.6 Meter Solar Telescope in Big Bear: Origins of Space Weather Telescope. 5a. CONTRACT NUMBER FA9550-09-1-0655 5b. GRANT NUMBER 5c. PROGRAM...STATEMENT 13. SUPPLEMENTARY NOTES 14. ABSTRACT In early 2009 at Big Bear Solar Observatory (BBSO), first light science observations were made

  14. FalconSAT-7: a membrane space solar telescope

    NASA Astrophysics Data System (ADS)

    Andersen, Geoff; Asmolova, Olha; McHarg, Matthew G.; Quiller, Trey; Maldonado, Carlos

    2016-07-01

    The US Air Force Academy of Physics has built FalconSAT-7, a membrane solar telescope to be deployed from a 3U CubeSat in LEO. The primary optic is a 0.2m photon sieve - a diffractive element consisting of billions of tiny circular dimples etched into a Kapton sheet. The membrane its support structure, secondary optics, two imaging cameras and associated control, recording electronics are packaged within half the CubeSat volume. Once in space the supporting pantograph structure is deployed, extending out and pulling the membrane flat under tension. The telescope will then be directed at the Sun to gather images at H-alpha for transmission to the ground. We will present details of the optical configuration, operation and performance of the flight telescope which has been made ready for launch in early 2017.

  15. Solar System Observations with the James Webb Space Telescope

    NASA Technical Reports Server (NTRS)

    Norwood, James; Hammel, Heidi; Milam, Stefanie; Stansberry, John; Lunine, Jonathan; Chanover, Nancy; Hines, Dean; Sonneborn, George; Tiscareno, Matthew; Brown, Michael; Ferruit, Pierre

    2016-01-01

    The James Webb Space Telescope (JWST) will enable a wealth of new scientific investigations in the near- and mid-infrared, with sensitivity and spatial/spectral resolution greatly surpassing its predecessors. In this paper, we focus upon Solar System science facilitated by JWST, discussing the most current information available concerning JWST instrument properties and observing techniques relevant to planetary science. We also present numerous example observing scenarios for a wide variety of Solar System targets to illustrate the potential of JWST science to the Solar System community. This paper updates and supersedes the Solar System white paper published by the JWST Project in 2010. It is based both on that paper and on a workshop held at the annual meeting of the Division for Planetary Sciences in Reno, NV, in 2012.

  16. The Solar-A soft X-ray telescope experiment

    NASA Technical Reports Server (NTRS)

    Acton, L.; Bruner, M.; Brown, W.; Lemen, J.; Hirayama, T.

    1988-01-01

    The Japanese Solar-A mission for the study of high energy solar physics is timed to observe the sun during the next activity maximum. This small spacecraft includes a carefully coordinated complement of instruments for flare studies. In particular, the soft X-ray telescope (SXT) will provide X-ray images of flares with higher sensitivity and time resolution than have been available before. This paper describes the scientific capabilities of the SXT and illustrates its application to the study of an impulsive compact flare.

  17. The Lyman-alpha Imager onboard Solar Polar Orbit Telescope

    NASA Astrophysics Data System (ADS)

    Li, Baoquan; Li, Haitao; Zhou, Sizhong; Jiang, Bo

    2013-12-01

    Solar Polar ORbit Telescope (SPORT) was originally proposed in 2004 by the National Space Science Center, Chinese Academy of Sciences, which is currently being under background engineering study phase in China. SPORT will carry a suite of remote-sensing and in-situ instruments to observe coronal mass ejections (CMEs), solar high-latitude magnetism, and the fast solar wind from a polar orbit around the Sun. The Lyman-alpha Imager (LMI) is one of the key remotesensing instruments onboard SPORT with 45arcmin FOV, 2000mm effective focal length and 1.4arcsec/pixel spatial resolution . The size of LMI is φ150×1000mm, and the weight is less than10kg, including the 7kg telescope tube and 3kg electronic box. There are three 121.6nm filters used in the LMI optical path, so the 98% spectral purity image of 121.6nm can be achieved. The 121.6nm solar Lyman-alpha line is produced in the chromosphere and very sensitive to plasma temperature, plasma velocity and magnetism variation in the chromosphere. Solar Lyman-alpha disk image is an ideal tracker for corona magnetism variation.

  18. Design review of the Brazilian Experimental Solar Telescope

    NASA Astrophysics Data System (ADS)

    Dal Lago, A.; Vieira, L. E. A.; Albuquerque, B.; Castilho, B.; Guarnieri, F. L.; Cardoso, F. R.; Guerrero, G.; Rodríguez, J. M.; Santos, J.; Costa, J. E. R.; Palacios, J.; da Silva, L.; Alves, L. R.; Costa, L. L.; Sampaio, M.; Dias Silveira, M. V.; Domingues, M. O.; Rockenbach, M.; Aquino, M. C. O.; Soares, M. C. R.; Barbosa, M. J.; Mendes, O., Jr.; Jauer, P. R.; Branco, R.; Dallaqua, R.; Stekel, T. R. C.; Pinto, T. S. N.; Menconi, V. E.; Souza, V. M. C. E. S.; Gonzalez, W.; Rigozo, N.

    2015-12-01

    The Brazilian's National Institute for Space Research (INPE), in collaboration with the Engineering School of Lorena/University of São Paulo (EEL/USP), the Federal University of Minas Gerais (UFMG), and the Brazilian's National Laboratory for Astrophysics (LNA), is developing a solar vector magnetograph and visible-light imager to study solar processes through observations of the solar surface magnetic field. The Brazilian Experimental Solar Telescope is designed to obtain full disk magnetic field and line-of-sight velocity observations in the photosphere. Here we discuss the system requirements and the first design review of the instrument. The instrument is composed by a Ritchey-Chrétien telescope with a 500 mm aperture and 4000 mm focal length. LCD polarization modulators will be employed for the polarization analysis and a tuning Fabry-Perot filter for the wavelength scanning near the Fe II 630.25 nm line. Two large field-of-view, high-resolution 5.5 megapixel sCMOS cameras will be employed as sensors. Additionally, we describe the project management and system engineering approaches employed in this project. As the magnetic field anchored at the solar surface produces most of the structures and energetic events in the upper solar atmosphere and significantly influences the heliosphere, the development of this instrument plays an important role in advancing scientific knowledge in this field. In particular, the Brazilian's Space Weather program will benefit most from the development of this technology. We expect that this project will be the starting point to establish a strong research program on Solar Physics in Brazil. Our main aim is to progressively acquire the know-how to build state-of-art solar vector magnetograph and visible-light imagers for space-based platforms.

  19. The Advanced Technology Solar Telescope: design and early construction

    NASA Astrophysics Data System (ADS)

    McMullin, Joseph P.; Rimmele, Thomas R.; Keil, Stephen L.; Warner, Mark; Barden, Samuel; Bulau, Scott; Craig, Simon; Goodrich, Bret; Hansen, Eric; Hegwer, Steve; Hubbard, Robert; McBride, William; Shimko, Steve; Wöger, Friedrich; Ditsler, Jennifer

    2012-09-01

    The National Solar Observatory’s (NSO) Advanced Technology Solar Telescope (ATST) is the first large U.S. solar telescope accessible to the worldwide solar physics community to be constructed in more than 30 years. The 4-meter diameter facility will operate over a broad wavelength range (0.35 to 28 μm ), employing adaptive optics systems to achieve diffraction limited imaging and resolve features approximately 20 km on the Sun; the key observational parameters (collecting area, spatial resolution, spectral coverage, polarization accuracy, low scattered light) enable resolution of the theoretically-predicted, fine-scale magnetic features and their dynamics which modulate the radiative output of the sun and drive the release of magnetic energy from the Sun’s atmosphere in the form of flares and coronal mass ejections. In 2010, the ATST received a significant fraction of its funding for construction. In the subsequent two years, the project has hired staff and opened an office on Maui. A number of large industrial contracts have been placed throughout the world to complete the detailed designs and begin constructing the major telescope subsystems. These contracts have included the site development, AandE designs, mirrors, polishing, optic support assemblies, telescope mount and coudé rotator structures, enclosure, thermal and mechanical systems, and high-level software and controls. In addition, design development work on the instrument suite has undergone significant progress; this has included the completion of preliminary design reviews (PDR) for all five facility instruments. Permitting required for physically starting construction on the mountaintop of Haleakalā, Maui has also progressed. This paper will review the ATST goals and specifications, describe each of the major subsystems under construction, and review the contracts and lessons learned during the contracting and early construction phases. Schedules for site construction, key factory testing of

  20. Polarization optical components of the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Sueoka, Stacey Ritsuyo

    2016-08-01

    The Daniel K Inouye Solar Telescope (DKIST), when completed in 2019 will be the largest solar telescope built to date. DKIST will have a suite of first light polarimetric instrumentation requiring broadband polarization modulation and calibration optical elements. Compound crystalline retarders meet the design requirements for efficient modulators and achromatic calibration retarders. These retarders are the only possible large diameter optic that can survive the high flux, 5 arc minute field, and ultraviolet intense environment of a large aperture solar telescope at Gregorian focus. This dissertation presents work performed for the project. First, I measured birefringence of the candidate materials necessary to complete designs. Then, I modeled the polarization effects with three-dimensional ray-tracing codes as a function of angle of incidence and field of view. Through this analysis I learned that due to the incident converging F/13 beam on the calibration retarders, the previously assumed linear retarder model fails to account for effects above the project polarization specifications. I discuss modeling strategies such as Mueller matrix decompositions and simplifications of those strategies while still meeting fit error requirements. Finally, I present characterization techniques and how these were applied to prototype components.

  1. High resolution telescopes at the National Solar Observatory

    NASA Astrophysics Data System (ADS)

    Dunn, R. B.; Smartt, R. N.

    The principal high-resolution telescopes of the National Solar Observatory are its two evacuated telescopes of 61-cm aperture (Kitt Peak) and 75-cm aperture (Sac Peak). The 61-cm telescope is used for making full-disk magnetograms, spectromagnetograms and 10830-wave length maps that show coronal holes, and is dedicated to synoptic programs. The 75-cm telescope at Sac Peak is described. Upgrades that are under way include an adaptive mirror and fast mirror system that will feed several focal-plane instruments, including the Universal Spectrograph (a new spectrograph whose detectors are CCD cameras), and the Universal Birefringent Filter, (a Fabry-Perot Interferometer); an Advanced Stokes Polarimeter is being constructed at the High Altitude Observatory. Additional equipment planned for this telescope includes an improved temperature control subsystem for the entrance window, an instrument that continually measures Fried's parameter, and integrating more advanced data collection systems into a computer network. The observatory is also pursuing a mirror coronagraph, which should have high resolution and which could be built in apertures larger than a meter.

  2. Construction status of the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    McMullin, Joseph P.; Rimmele, Thomas R.; Martínez Pillet, Valentin; Berger, Thomas E.; Casini, Roberto; Craig, Simon C.; Elmore, David F.; Goodrich, Bret D.; Hegwer, Steve L.; Hubbard, Robert P.; Johansson, Erik M.; Kuhn, Jeffrey R.; Lin, Haosheng; McVeigh, William; Schmidt, Wolfgang; Shimko, Steve; Tritschler, Alexandra; Warner, Mark; Wöger, Friedrich

    2014-07-01

    The Daniel K. Inouye Solar Telescope (DKIST, renamed in December 2013 from the Advanced Technology Solar Telescope) will be the largest solar facility built when it begins operations in 2019. Designed and developed to meet the needs of critical high resolution and high sensitivity spectral and polarimetric observations of the Sun, the observatory will enable key research for the study of solar magnetism and its influence on the solar wind, flares, coronal mass ejections and solar irradiance variations. The 4-meter class facility will operate over a broad wavelength range (0.38 to 28 microns, initially 0.38 to 5 microns), using a state-of-the-art adaptive optics system to provide diffraction-limited imaging and the ability to resolve features approximately 25 km on the Sun. Five first-light instruments will be available at the start of operations: Visible Broadband Imager (VBI; National Solar Observatory), Visible SpectroPolarimeter (ViSP; NCAR High Altitude Observatory), Visible Tunable Filter (VTF; Kiepenheuer Institut für Sonnenphysik), Diffraction Limited Near InfraRed SpectroPolarimeter (DL-NIRSP; University of Hawai'i, Institute for Astronomy) and the Cryogenic Near InfraRed SpectroPolarimeter (Cryo-NIRSP; University of Hawai'i, Institute for Astronomy). As of mid-2014, the key subsystems have been designed and fabrication is well underway, including the site construction, which began in December 2012. We provide an update on the development of the facilities both on site at the Haleakalā Observatories on Maui and the development of components around the world. We present the overall construction and integration schedule leading to the handover to operations in mid 2019. In addition, we outline the evolving challenges being met by the project, spanning the full spectrum of issues covering technical, fiscal, and geographical, that are specific to this project, though with clear counterparts to other large astronomical construction projects.

  3. Daniel K. Inouye Solar Telescope: Overview and Status

    NASA Astrophysics Data System (ADS)

    Rimmele, Thomas; McMullin, Joseph; Warner, Mark; Craig, Simon; Woeger, Friedrich; Tritschler, Alexandra; Cassini, Roberto; Kuhn, Jeff; Lin, Haosheng; Schmidt, Wolfgang; Berukoff, Steve; Reardon, Kevin; Goode, Phil; Knoelker, Michael; Rosner, Robert; Mathioudakis, Mihalis; DKIST TEAM

    2015-08-01

    The 4m Daniel K. Inouye Solar Telescope (DKIST) currently under construction on Haleakala, Maui will be the world’s largest solar telescope. Designed to meet the needs of critical high resolution and high sensitivity spectral and polarimetric observations of the sun, this facility will perform key observations of our nearest star that matters most to humankind. DKIST’s superb resolution and sensitivity will enable astronomers to unravel many of the mysteries the Sun presents, including the origin of solar magnetism, the mechanisms of coronal heating and drivers of the solar wind, flares, coronal mass ejections and variability in solar output. The all-reflecting, off-axis design allows the facility to observe over a broad wavelength range and enables DKIST to operate as a coronagraph. In addition, the photon flux provided by its large aperture will be capable of routine and precise measurements of the currently elusive coronal magnetic fields. The state-of-the-art adaptive optics system provides diffraction limited imaging and the ability to resolve features approximately 20 km on the Sun. Five first light instruments, representing a broad community effort, will be available at the start of operations: Visible Broadband Imager (National Solar Observatory), Visible Spectro-Polarimeter (High Altitude Observatory), Visible Tunable Filter (Kiepenheuer Institute, Germany), Diffraction Limited NIR Spectro-Polarimeter (University of Hawaii) and the Cryogenic NIR Spectro-Polarimeter (University of Hawaii). High speed cameras for capturing highly dynamic processes in the solar atmosphere are being developed by a UK consortium. Site construction on Haleakala began in December 2012 and is progressing on schedule. Operations are scheduled to begin in 2019. We provide an overview of the facility, discuss the construction status, and present progress with DKIST operations planning.

  4. On the co-alignment of solar telescopes. A new approach to solar pointing

    NASA Astrophysics Data System (ADS)

    Staiger, J.

    2013-06-01

    Helioseismological measurements require long observing times and thus may be adversely affected by lateral image drifts as caused by pointing instabilities. At the Vacuum Tower Telescope VTT, Tenerife we have recorded drift values of up to 5" per hour under unstable thermal conditions (dome opening, strong day-to-day thermal gradients). Typically drifts of 0.5" - 1.0" per hour may be encountered under more favorable conditions. Past experience has shown that most high-resolution solar telescopes may be affected by this problem to some degree. This inherent shortcoming of solar pointing is caused by the fact that the guiding loop can be closed only within the guiding beam but not within the telescope's main beam. We have developed a new approach to this problem. We correlate continuum brightness patterns observed from within the telescope main beam with patterns originating from a full disk telescope. We show that brightness patterns of sufficient size are unique with respect to solar location at any instant of time and may serve as a location identifier. We make use of the fact that averaged location information of solar structures is invariant with respect to telescope resolution. We have carried out tests at the VTT together with SDO. We have used SDO as a full disk reference. We were able to reduce lateral image drifts by an order of magnitude.

  5. Science cases in the integrated modeling of Chinese Giant Solar Telescope

    NASA Astrophysics Data System (ADS)

    Liu, Zhong; Ji, Haisheng; Jin, Zhenyu; Lin, Jun; Deng, Yuanyong

    2016-07-01

    Science goals of telescopes are the fundament data of integrated modeling of astronomical telescopes. The differences between science goals are sources of telescope's diversities. Solar telescopes are a very special type in astronomical telescopes. Chinese Giant Solar Telescope1 (CGST) is currently designed to be an 8-meter Ring Interferometric Telescope (RIT). Even compare with the other solar telescopes, CGST is also an unusual telescope due to its ring aperture and distinctive science goals. As the initial data of integrated modeling of CGST, the main science cases determine the basic structure of the telescope as well as its working mode. This paper will discuss the importance of the primary science case in integrated modeling of CGST.

  6. Construction status of the Daniel K. Inouye solar telescope

    NASA Astrophysics Data System (ADS)

    McMullin, Joseph P.; Rimmele, Thomas R.; Warner, Mark; Pillet, Valentin M.; Casini, Roberto; Berukoff, Steve; Craig, Simon C.; Elmore, David; Ferayorni, Andrew; Goodrich, Bret D.; Hubbard, Robert P.; Harrington, David; Hegwer, Steve; Jeffers, Paul; Johansson, Erik M.; Kuhn, Jeff; Lin, Haosheng; Marshall, Heather; Mathioudakis, Mihalis; McBride, William R.; McVeigh, William; Phelps, LeEllen; Schmidt, Wolfgang; Shimko, Steve; Sueoka, Stacey; Tritschler, Alexandra; Williams, Timothy R.; Wöger, Friedrich

    2016-08-01

    We provide an update on the construction status of the Daniel K. Inouye Solar Telescope. This 4-m diameter facility is designed to enable detection and spatial/temporal resolution of the predicted, fundamental astrophysical processes driving solar magnetism at their intrinsic scales throughout the solar atmosphere. These data will drive key research on solar magnetism and its influence on solar winds, flares, coronal mass ejections and solar irradiance variability. The facility is developed to support a broad wavelength range (0.35 to 28 microns) and will employ state-of-the-art adaptive optics systems to provide diffraction limited imaging, resolving features approximately 20 km on the Sun. At the start of operations, there will be five instruments initially deployed: Visible Broadband Imager (VBI; National Solar Observatory), Visible SpectroPolarimeter (ViSP; NCAR High Altitude Observatory), Visible Tunable Filter (VTF (a Fabry-Perot tunable spectropolarimeter); Kiepenheuer Institute for Solarphysics), Diffraction Limited NIR Spectropolarimeter (DL-NIRSP; University of Hawaii, Institute for Astronomy) and the Cryogenic NIR Spectropolarimeter (Cryo-NIRSP; University of Hawaii, Institute for Astronomy). As of mid-2016, the project construction is in its 4th year of site construction and 7th year overall. Major milestones in the off-site development include the conclusion of the polishing of the M1 mirror by University of Arizona, College of Optical Sciences, the delivery of the Top End Optical Assembly (L3), the acceptance of the Deformable Mirror System (Xinetics); all optical systems have been contracted and are either accepted or in fabrication. The Enclosure and Telescope Mount Assembly passed through their factory acceptance in 2014 and 2015, respectively. The enclosure site construction is currently concluding while the Telescope Mount Assembly site erection is underway. The facility buildings (Utility and Support and Operations) have been completed with

  7. Front-end and slow control electronics for large area SiPMs used for the single mirror Small Size Telescope (SST-1M) of the Cherenkov Telescope Array (CTA)

    NASA Astrophysics Data System (ADS)

    Aguilar, J. A.; Bilnik, W.; Borkowski, J.; Cadoux, F.; Christov, A.; della Volpe, D.; Favre, Y.; Heller, M.; Kasperek, J.; Lyard, E.; Marszalek, A.; Moderski, R.; Montaruli, T.; Porcelli, A.; Prandini, E.; Rajda, P.; Rameez, M.; Schioppa, E., Jr.; Troyano Pujadas, I.; Zietara, K.; Blocki, J.; Bogacz, L.; Bulik, T.; Curyło, M.; Dyrda, M.; Frankowski, A.; Grudniki, Ł.; Grudzinska, M.; Idźkowski, B.; Jamrozy, M.; Janiak, M.; Lalik, K.; Mach, E.; Mandat, D.; Michalowski, J.; Neronov, A.; Niemiec, J.; Ostrowski, M.; Paśko, P.; Pech, M.; Schovanek, P.; Seweryn, K.; Skowron, K.; Sliusar, V.; Sowinski, M.; Stawarz, Ł.; Stodulska, M.; Stodulski, M.; Toscano, S.; Walter, R.; Wiecek, M.; Zagdański, A.; Żychowski, P.

    2016-07-01

    The single mirror Small Size Telescope (SST-1M) project proposes a design among others for the smallest type of telescopes (SST), that will compose the south observatory of the Cherenkov Telescope Array (CTA). The SST camera collecting the Cherenkov light resulting from very high energy gamma-ray interactions in the atmosphere proposes to use Silicon PhotoMultipliers (SiPM). The SST-1M design has led to the use of unique pixel shape and size that required a dedicated development by the University of Geneva and Hamamatsu. An active surface of 94 mm2 and a resulting total capacitance of 3.4 nF combined with the stringent requirements of the CTA project on timing and charge resolution have led the University of Geneva to develop a custom preamplifier stage and slow-control system. The design and performance of the tailor made preamplifier stage and of the slow control electronics will be briefly described. The bias circuit of the sensor contains a resistor meant to prevent the sensor from drawing high current. However this resistor also introduces a voltage drop at the sensor input impacting the stability of its operation. A model has been developed in order to derive the parameters needed to account for it at the data analysis level. A solution based on the SST-1M front-end and digital readout is proposed to compensate for the voltage drop at the sensor cathode.

  8. An Airborne Infrared Telescope and Spectrograph for Solar Eclipse Observations

    NASA Astrophysics Data System (ADS)

    DeLuca, Edward E.; Cheimets, Peter; Golub, Leon

    2014-06-01

    The solar infrared spectrum offers great possibilities for direct spatially resolved measurements of the solar coronal magnetic fields, via imaging of the plasma that is constrained to follow the magnetic field direction and via spectro-polarimetry that permits measurement of the field strength in the corona. Energy stored in coronal magnetic fields is released in flares and coronal mass ejections (CME) and provides the ultimate source of energy for space weather. The large scale structure of the coronal field, and the opening up of the field in a transition zone between the closed and open corona determines the speed and structure of the solar wind, providing the background environment through which CMEs propagate. At present our only direct measurements of the solar magnetic fields are in the photosphere and chromosphere. The ability to determine where and why the corona transitions from closed to open, combined with measurements of the field strength via infrared coronal spectro-polarimetry will give us a powerful new tool in our quest to develop the next generation of forecasting models.We describe a first step in achieving this goal: a proposal for a new IR telescope, image stabilization system, and spectrometer, for the NCAR HIPER GV aircraft. The telescope/spectrograph will operate in the 2-6micron wavelength region, during solar eclipses, starting with the trans-north American eclipse in August 2017. The HIAPER aircraft flying at ~35,000 ft will provide an excellent platform for IR observations. Our imaging and spectroscopy experiment will show the distribution and intensity of IR forbidden lines in the solar corona.

  9. Hubble Space Telescope solar cell module thermal cycle test

    NASA Technical Reports Server (NTRS)

    Douglas, Alexander; Edge, Ted; Willowby, Douglas; Gerlach, Lothar

    1992-01-01

    The Hubble Space Telescope (HST) solar array consists of two identical double roll-out wings designed after the Hughes flexible roll-up solar array (FRUSA) and was developed by the European Space Agency (ESA) to meet specified HST power output requirements at the end of 2 years, with a functional lifetime of 5 years. The requirement that the HST solar array remain functional both mechanically and electrically during its 5-year lifetime meant that the array must withstand 30,000 low Earth orbit (LEO) thermal cycles between approximately +100 and -100 C. In order to evaluate the ability of the array to meet this requirement, an accelerated thermal cycle test in vacuum was conducted at NASA's Marshall Space Flight Center (MSFC), using two 128-cell solar array modules which duplicated the flight HST solar array. Several other tests were performed on the modules. The thermal cycle test was interrupted after 2,577 cycles, and a 'cold-roll' test was performed on one of the modules in order to evaluate the ability of the flight array to survive an emergency deployment during the dark (cold) portion of an orbit. A posttest static shadow test was performed on one of the modules in order to analyze temperature gradients across the module. Finally, current in-flight electrical performance data from the actual HST flight solar array will be tested.

  10. Solar System Observations with the James Webb Space Telescope

    NASA Astrophysics Data System (ADS)

    Hammel, Heidi B.; Lunine, J.; Sonneborn, G.; Rieke, G.; Rieke, M.; Stansberry, J.; Schaller, E.; Orton, G.; Isaacs, J.

    2010-10-01

    The James Webb Space Telescope is a large infrared space telescope currently scheduled for launch in 2014. Webb will reside in a elliptical orbit about the semi-stable second Lagrange point (L2). Its 6.5-meter primary mirror is designed to work primarily in the infrared, with some capability in the visible (i.e., from 0.6 to 27 microns). Webb has four science instruments: the Near InfraRed Camera (NIRCam), the Near InfraRed Spectrograph (NIRSpec), the Mid-InfraRed Instrument (MIRI), and the Fine Guidance Sensor Tunable Filter Camera (FGS-TFI). One of Webb's science themes is "Planetary Systems and the Origins of Life" which includes observations of Solar System objects; the telescope will be able to track moving targets with rates up to 0.030 arcseconds per second. Its combination of broad wavelength range, high sensitivity, and near-diffraction limited imaging around 2 microns make it a superb facility for a variety of Solar System programs. In this poster, we present an overview of Webb's scientific capabilities and their relevance to current topics in planetary science.

  11. The soft x ray telescope for Solar-A

    NASA Technical Reports Server (NTRS)

    Brown, W. A.; Acton, L. W.; Bruner, M. E.; Lemen, J. R.; Strong, K. T.

    1989-01-01

    The Solar-A satellite being prepared by the Institute for Sapce and Astronautical Sciences (ISAS) in Japan is dedicated to high energy observations of solar flares. The Soft X Ray Telescope (SXT) is being prepared to provide filtered images in the 2 to 60 A interval. The flight model is now undergoing tests in the 1000 foot tunnel at MSFC. Launch will be in September 1991. Earlier resolution and efficiency tests on the grazing incidence mirror have established its performance in soft x rays. The one-piece, two mirror grazing incidence telescope is supported in a strain free mount separated from the focal plane assembly by a carbon-epoxy metering tube whose windings and filler are chosen to minimize thermal and hygroscopic effects. The CCD detector images both the x ray and the concentric visible light aspect telescope. Optical filters provide images at 4308 and 4700 A. The SXT will be capable of producing over 8000 of the smallest partial frame images per day, or fewer but larger images, up to 1024 x 1024 pixel images. Image sequence with two or more of the five x ray analysis filters, with automatic exposure compensation to optimize the charge collection by the CCD detector, will be used to provide plasma diagnostics. Calculations using a differential emission measure code were used to optimize filter selection over the range of emission measure variations and to avoid redundancy, but the filters were chosen primarily to give ratios that are monotonic in plasma temperature.

  12. Correlation tracking study for meter-class solar telescope on space shuttle. [solar granulation

    NASA Technical Reports Server (NTRS)

    Smithson, R. C.; Tarbell, T. D.

    1977-01-01

    The theory and expected performance level of correlation trackers used to control the pointing of a solar telescope in space using white light granulation as a target were studied. Three specific trackers were modeled and their performance levels predicted for telescopes of various apertures. The performance of the computer model trackers on computer enhanced granulation photographs was evaluated. Parametric equations for predicting tracker performance are presented.

  13. Considerations for the next generation of solar telescopes: A systems approach to solar physics

    NASA Astrophysics Data System (ADS)

    Title, A.

    2010-06-01

    The exciting new high resolution images from the one meter Sunrise balloon telescope and the first images from the 1.6 meter Big Bear telescope together with the continuing data from the 1 meter Swedish Solar Observatory demonstrate the promise of the new generation of multimeter solar telescopes. While the promise of the new generation of telescopes is great the technical challenges to build them will require the efforts of a significant fraction of the solar community. In this talk I will emphasize the need for an integrated systems approach to the development of the telescope, its instruments, its software, and its operations and management structures. The experience of several decades of space mission has taught us a great deal about the value of planning mission development from the definition of the primary scientific objectives to the delivery of the data to the science community. Much of these lessons learned, often painfully, should provide guidance to those in developing the new telescope systems.

  14. Athermalization design of collimating lens system for space solar telescope

    NASA Astrophysics Data System (ADS)

    Tao, Shuaiyang; Yang, Jianfeng; Ma, Xiaolong

    2015-11-01

    The Solar Magnetic Field Telescope (MFT) , which imaged directly towards the sun , received about 1000W heat load irradiating into the telescope system, resulting in changes of ambient temperature. According to the principles of athermal design, a collimating lens system was designed, allowing MFT to work properly between a wider temperature range . The collimating lens system with F number of 3.55, worked in the visible spectrum, had the effective focal length of 156.4mm and the full field of view of 2.8 arc min ×2.8 arc min. Through the passive optical athermal method , the optimized lens works at ambient temperature ranging from -40° to 60°.The radii of RMS are all smaller than the pixel pitch. The image quality approaches to diffraction limit and the MTF value is over 0.75, which satisfies the system specifications.

  15. Solar Patrol Polarization Telescopes at 45 and 90 GHz

    NASA Astrophysics Data System (ADS)

    Valio, A.; Kaufmann, P.; Gimenez de Castro, C. G.; Raulin, J.-P.; Fernandes, L. O.; Marun, A.

    2012-12-01

    The spectra of solar flares provide important information about the physics involved in the flaring process. Presently, however, there is a large frequency gap at radio frequencies between 20 and 200 GHz. Unfortunately, this gap hinders the determination of important flare parameters such as: (i) the frequency of the peak of the spectra, or turnover frequency, which yields the magnetic field intensity in the flaring source and electron density; (ii) the optically thin frequency slope, that is related to the accelerated electrons with a power-law energy distribution, allowing information about the acceleration mechanism; (iii) and other physical parameters such as source size and inhomogeneities that may also be estimated from spectra with complete spectral coverage. Recently a new spectral component at high frequencies was discovered with fluxes increasing above 200 GHz, distinct from the traditional microwave component, with peak frequencies at about 10 GHz. To elucidate the nature of both components and fully characterize the spectra of solar flares, we analyze new observations at the intermediate frequencies obtained by two antennas with receivers at 45 and 90 GHz, capable of measuring circular polarization. The telescope, installed at CASLEO Observatory (Argentina), is described in detail. We also analyze the observations of the flares it has already detected, including their spectra especially when data at 212 and 405 GHz from the Solar Submillimeter Telescope (SST), located at the same site, is available.

  16. The 100 cm solar telescope primary mirror study

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The manufacturing impact of primary mirror configuration on the performance of a 100 cm aperture solar telescope was studied. Three primary mirror configurations were considered: solid, standard lightweight, and mushroom. All of these are of low expansion material. Specifically, the study consisted of evaluating the mirrors with regard to: manufacturing metrology, manufacturing risk factors and ultimate quality assessment. As a result of this evaluation, a performance comparison of the configurations was made, and a recommendation of mirror configuration is the final output. These evaluations, comparisons and recommendations are discussed in detail. Other investigations were completed and are documented in the appendices.

  17. Planet imaging polarimetry with the solar telescope GREGOR

    NASA Astrophysics Data System (ADS)

    Gisler, Daniel; Berkefeld, Thomas; Berdyugina, Svetlana

    2016-07-01

    Polarimetry of planets and planetary systems provide unique information on physics and chemistry of planetary atmospheres. We have built a new instrument, GREGOR Planet Polarimeter (GPP), which includes fast polarimetric modulation, high-rate readout CCD, and adaptive optics. It operates at the solar telescope GREGOR on Tenerife, Canary Islands, and it benefits from the possibility to calibrate the entire optical train after the secondary mirror. Here we present the instrument design, performance tests, and first scientific data. This research is supported by the ERC Advanced Grant HotMol.

  18. The cern axion solar telescope (CAST): an update

    NASA Astrophysics Data System (ADS)

    Andriamonje, S.; Arsov, V.; Aune, S.; Aune, T.; Avignone, F. T.; Barth, K.; Belov, A.; Beltran, B.; Bräuninger, H.; Carmona, J.; Cebrián, S.; Chesi, E.; Cipolla, G.; Collar, J.; Creswick, R.; Dafni, T.; Davenport, M.; Dedousis, S.; Delattre, M.; Delbart, A.; Deoliveira, R.; Dilella, L.; Eleftheriadis, C.; Engelhauser, J.; Fanourakis, G.; Farach, H.; Ferrer, E.; Fischer, H.; Formenti, F.; Franz, J.; Friedrich, P.; Geralis, T.; Giomataris, I.; Gninenko, S.; Golubev, N.; Hartmann, R.; Hasinoff, M.; Heinsius, F.-H.; Hoffmann, D. H. H.; Irastorza, I.; Jacoby, J.; Joux, J.-N.; Kang, D.; Königsmann, K.; Kotthaus, R.; Krcmar, M.; Kuster, M.; Lakic, B.; Lasseur, C.; Liolios, A.; Lippitsch, A.; Ljubicic, A.; Lutz, G.; Luzon, G.; Morales, A.; Morales, J.; Mutterer, M.; Nikolaidis, A.; de Solorzano, A. Ortiz; Papaevangelou, T.; Placci, A.; Raffelt, G.; Rammos, P.; Robert, J. P.; Ruz, J.; Sarsa, M.; Schill, C.; Serber, W.; Semertzidis, Y.; Vieira, J.; Villar, J.; Vullierme, B.; Walckiers, L.; Zioutas, K.

    2005-01-01

    The CERN Axion Solar Telescope (CAST), a 10 meter long LHC, 9 Tesla, test magnet is mounted on a moving platform that tracks the sun about 1.5 hours during sunrise, again during sunset. It moves ±80 vertically and ±400 horizontally. It has been taking data continuously since July 10, 2003. Data analyzed thus far yield an upper bound on the photon-axion coupling constant, gaγγ ⩽ 3 × 10-10 GeV-1 for axion masses less than 5 × 10-2 eV.

  19. Solar System Observing Capabilities With The James Webb Space Telescope

    NASA Astrophysics Data System (ADS)

    Sonneborn, George; Milam, S. N.; Hines, D. C.; Stansberry, J. A.; Hammel, H. B.; Lunine, J. I.

    2014-01-01

    The James Webb Space Telescope (JWST) will provide important new capabilities to study our Solar System. JWST is a large aperture, cryogenic, infrared-optimized space observatory under construction by NASA, ESA, and CSA for launch in 2018 into a L2 orbit. Imaging, spectroscopy, and coronography covers 0.6-29 microns. Integral-field spectroscopy is performed with apertures 3 to 7 arcsec square (spatial slices of 0.1 to 0.6 arcsec). JWST is designed to observe Solar System objects having apparent rates of motion up to 0.030 arcseconds/second. This tracking capability includes the planets, satellites, asteroids, Trans-Neptunian Objects, and comets beyond Earth’s orbit. JWST will observe in the solar elongation range of 85 to 135 degrees, and a roll range of +/-5 degrees about the telescope’s optical axis. During an observation of a moving target, the science target is held fixed in the desired science aperture by controlling the guide star to follow the inverse of the target’s trajectory. The pointing control software uses polynomial ephemerides for the target generated using data from JPL’s HORIZON system. The JWST guider field of view (2.2x2.2 arcmin) is located in the telescope focal plane several arcmin from the science apertures. The instrument apertures are fixed with respect to the telescope focal plane. For targets near the ecliptic, those apertures also have a nearly fixed orientation relative to the ecliptic. This results from the fact that the Observatory's sunshield and solar panels must always be between the telescope and the Sun. On-board scripts autonomously control the execution of the JWST science timeline. The event-driven scripts respond to actual slew and on-board command execution, making operations more efficient. Visits are scheduled with overlapping windows to provide execution flexibility and to avoid lost time. An observing plan covering about ten days will be uplinked weekly. Updates could be more frequent if necessary (for example

  20. Solar System Observing Capabilities With The James Webb Space Telescope

    NASA Astrophysics Data System (ADS)

    Sonneborn, George; Milam, S. N.; Hines, D. C.; Stansberry, J.; Hammel, H. B.; Lunine, J. I.

    2013-10-01

    The James Webb Space Telescope (JWST) will provide breakthrough capabilities to study our Solar System. JWST is a large aperture, cryogenic, infrared-optimized space observatory under construction by NASA, ESA, and CSA for launch in 2018 into a L2 orbit. Imaging, spectroscopy, and coronography covers 0.6-29 microns. JWST is designed to observe Solar System objects having apparent rates of motion up to 0.030 arcseconds/second. This capability includes the planets, satellites, asteroids, Trans-Neptunian Objects, and comets beyond Earth’s orbit. JWST can observe solar elongation of 85 to 135 degrees, and a roll range of +/-5 degrees about the telescope’s optical axis. During the observation of a moving target, the science target is held fixed in the desired science aperture by controlling the guide star to follow the inverse of the target’s trajectory. The pointing control software uses polynomial ephemerides for the target generated using JPL’s HORIZON system. The JWST guider field of view (2.2x2.2 arcmin) is located in the telescope focal plane several arcmin from the science apertures. The instrument apertures are fixed with respect to the telescope focal plane. For targets near the ecliptic, those apertures also have a nearly-fixed orientation relative to the ecliptic. This resultsfrom the fact that the Observatory's sun-shade and solar panels must always be between the telescope and the Sun. On-board scripts autonomously control the execution of the JWST science timeline. The event-driven scripts respond to actual slew and on-board command execution, making operations more efficient. Visits are scheduled with overlapping windows to provide execution flexibility and to avoid lost time. An observing plan covering about ten days will be uplinked weekly. Updates could be more frequent if necessary (for example, to accommodate a Target of Opportunity - TOO). The event-driven operations system supports time-critical observations and TOOs. The minimum response

  1. Advanced Technology Solar Telescope lower enclosure thermal system

    NASA Astrophysics Data System (ADS)

    Phelps, L.; Warner, M.

    2008-07-01

    The exterior of the Advanced Technology Solar Telescope enclosure requires cooling to eliminate so-called external dome seeing caused by solar loading during the observing day. This is achieved by way of coolant circulation through external plate coil panels, thereby maintaining the exterior surfaces of the enclosure at or just below ambient air temperature. As the distance from the optical path increases (e.g., on the surface of the lower enclosure), the stringency of the temperature requirement is diminished, thereby allowing a greater difference between the surface temperature and the ambient air temperature. This paper presents a comparison of the modeled performance of an active thermal control strategy on the lower enclosure to a passive strategy that employs concrete panels. A life-cycle cost analysis of each option is also presented.

  2. The feasibility of large refracting telescopes for solar coronal research

    NASA Astrophysics Data System (ADS)

    Nelson, Peter G.; Tomczyk, Steven; Elmore, David F.; Kolinski, Donald J.

    2008-07-01

    Measuring magnetic fields in the solar corona requires a large aperture telescope with exceptionally low levels of scattered light. For internally-occulted coronagraphs the main source is scattering from dust or microroughness on the primary lens or mirror. We show refracting primaries offer significantly lower levels for both sources. To observe magnetic fields in the solar corona with scientifically interesting spatial and temporal resolutions, a 1 meter aperture or larger is required. For a long time such large-scale refractors have been deemed impractical or impossible to construct due to gravitational deformation of the lens. We present the results of finite-element and optical analyses of the gravitational deformation, stress-induced birefringence, and absorptive heating of a (see manuscript)1.5 meter f/5 fused silica lens. These studies demonstrate the traditional objections to large refractors are unfounded and large refracting primaries have unique capabilities.

  3. Goldhelox: a soft x-ray solar telescope.

    PubMed

    Durfee, D S; Moody, J W; Brady, K D; Brown, C; Campbell, B; Durfee, M K; Early, D; Hansen, E; Madsen, D W; Morey, D B; Roming, P W; Savage, M B; Eastman, P F; Jensen, V

    1995-01-01

    The Goldhelox Project is the construction and use of a near-normal incidence soft x-ray robotic solar telescope by undergraduate students at Brigham Young University. Once it is completed and tested, it will be deployed from a Get-Away-Special (GAS) canister in the bay of a space shuttle. It will image the sun at a wavelength of 171-181Å with a time resolution of 1 sec and a spatial resolution of 2.5 arcsec. The observational bandpass was chosen to image x-rays from highly ionized coronal Fe lines. The data will be an aid in better understanding the beginning phases of solar flares and how flaring relates to the physics of the corona-chromosphere transition region. Goldhelox is tentatively scheduled to fly on a space shuttle sometime in 1995 or 1996. This paper outlines the project goals, basic instrument design, and the unique aspects of making this an undergraduate endeavor.

  4. Adjustment of a tower solar telescope and spectrograph: A method manual

    NASA Astrophysics Data System (ADS)

    Stepanian, N. N.; Sunitsa, G. A.; Malashchuk, V. M.

    2014-06-01

    Questions of the mounting and adjustment of a tower solar telescope are considered through the example of the TST-2 telescope of the Crimean Astrophysical Observatory Scientific Research Institute. The authors describe the optical circuits of the telescope and spectrograph and list the basic requirements for the mutual arrangement of individual components of the telescope. Simple methods for adjusting elements of the telescope and spectrograph are described.

  5. Reliability models applicable to space telescope solar array assembly system

    NASA Technical Reports Server (NTRS)

    Patil, S. A.

    1986-01-01

    A complex system may consist of a number of subsystems with several components in series, parallel, or combination of both series and parallel. In order to predict how well the system will perform, it is necessary to know the reliabilities of the subsystems and the reliability of the whole system. The objective of the present study is to develop mathematical models of the reliability which are applicable to complex systems. The models are determined by assuming k failures out of n components in a subsystem. By taking k = 1 and k = n, these models reduce to parallel and series models; hence, the models can be specialized to parallel, series combination systems. The models are developed by assuming the failure rates of the components as functions of time and as such, can be applied to processes with or without aging effects. The reliability models are further specialized to Space Telescope Solar Arrray (STSA) System. The STSA consists of 20 identical solar panel assemblies (SPA's). The reliabilities of the SPA's are determined by the reliabilities of solar cell strings, interconnects, and diodes. The estimates of the reliability of the system for one to five years are calculated by using the reliability estimates of solar cells and interconnects given n ESA documents. Aging effects in relation to breaks in interconnects are discussed.

  6. Broad band imager for the European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Munari, Matteo; Scuderi, Salvo; Cecconi, Massimo

    2010-07-01

    The European Solar Telescope (EST) is a joint project of several European research institutes to design and realize a 4-m class solar telescope. The EST broad band imager is an imaging instrument whose function is to obtain diffraction limited images over the full field of view of EST at multiple wavelengths and high frame rate. Its scientific objective is the study of fundamental astrophysical processes at their intrinsic scales in the Sun's atmosphere. The current layout foresee two observation modes: a maximum field of view mode and a high resolution mode. The imager will have a 2'x2' corrected field of view in the first mode and an angular resolution better than 0.04" at 500nm in the latter mode. The imager will cover a wavelength range spanning from 390nm to 900nm through a number of filters with bandpasses between 0.05nm and 0.5nm. To optimize optical performances and throughput there will be two arms working simultaneously: a blue arm (covering the 380nm - 500nm range) and a red arm (600nm - 900nm). The blue arm will have two channels while the red arm only one. Each channel will be divided in three subchannels: one will host narrow band filters for chromospheric observations, another one, in focus wide band filters used as reference for speckle reconstruction and photospheric observations, and the last one, out of focus wide band filters for phase diversity reconstruction of photospheric observations.

  7. The Multi-Spectral Solar Telescope Array (MSSTA)

    NASA Technical Reports Server (NTRS)

    Walker, A. B. C., Jr.; Barbee, Troy W., Jr.; Hoover, Richard B.

    1997-01-01

    In 1987, our consortium pioneered the application of normal incidence multilayer X-ray optics to solar physics by obtaining the first high resolution narrow band, "thermally differentiated" images of the corona', using the emissions of the Fe IX/Fe X complex at ((lambda)lambda) approx. 171 A to 175 A, and He II Lyman (beta) at 256 A. Subsequently, we developed a rocket borne solar observatory, the Multi Spectral Solar Telescope Array (MSSTA) that pioneered multi-thermal imaging of the solar atmosphere, using high resolution narrow band X-ray, EUV and FUV optical systems. Analysis of MSSTA observations has resulted in four significant insights into the structure of the solar atmosphere: (1) the diameter of coronal loops is essentially constant along their length; (2) models of the thermal and density structure of polar plumes based on MSSTA observations have been shown to be consistent with the thesis that they are the source of high speed solar wind streams; (3) the magnetic structure of the footpoints of polar plumes is monopolar, and their thermal structure is consistent with the thesis that the chromosphere at their footpoints is heated by conduction from above; (4) coronal bright points are small loops, typically 3,500 - 20,000 km long (5 sec - 30 sec); their footpoints are located at the poles of bipolar magnetic structures that are are distinguished from other network elements by having a brighter Lyman a signature. Loop models derived for 26 bright points are consistent with the thesis that the chromosphere at their footpoints is heated by conduction from the corona.

  8. Infrared Observations with the 1.6 Meter New Solar Telescope in Big Bear: Origins of Space Weather

    DTIC Science & Technology

    2015-05-21

    COVERED (From - To)      01-04-2012 to 31-03-2015 4.  TITLE AND SUBTITLE Infrared Observations with the 1.6 Meter New Solar Telescope in Big Bear : Origins...utilized the 1.6 m clear aperture solar telescope in Big Bear Lake, CA. This telescope is the largest aperture and most powerful solar telescope ever...solar telescope in Big Bear Lake, CA. This telescope is the largest aperture and most powerful solar telescope ever built, which enable the high

  9. An astro-comb calibrated solar telescope to search for the radial velocity signature of Venus

    NASA Astrophysics Data System (ADS)

    Phillips, David F.; Glenday, Alex G.; Dumusque, Xavier; Buchschacher, Nicolas; Cameron, Andrew Collier; Cecconi, Massimo; Charbonneau, David; Cosentino, Rosario; Ghedina, Adriano; Haywood, Raphäelle; Latham, David W.; Li, Chih-Hao; Lodi, Marcello; Lovis, Christophe; Molinari, Emilio; Pepe, Francesco; Sasselov, Dimitar; Szentgyorgyi, Andrew; Udry, Stephane; Walsworth, Ronald L.

    2016-07-01

    We recently demonstrated sub-m/s sensitivity in measuring the radial velocity (RV) between the Earth and Sun using a simple solar telescope feeding the HARPS-N spectrograph at the Italian National Telescope, which is calibrated with a green astro-comb. We are using the solar telescope to characterize the effects of stellar (solar) RV jitter due to activity on the solar surface with the goal of detecting the solar RV signal from Venus, thereby demonstrating the sensitivity of these instruments to detect true Earth-twin exoplanets.

  10. Solar System Observing with the Space Infrared Telescope Facility (SIRTF)

    NASA Technical Reports Server (NTRS)

    Cleve, J. Van; Meadows, V. S.; Stansberry, J.

    2003-01-01

    SIRTF is NASA's Space Infrared Telescope Facility. Currently planned for launch on 15 Apr 2003, it is the final element in NASA's Great Observatories Program. SIRTF has an 85 cm diameter f/12 lightweight beryllium telescope, cooled to lekss than 5.5K. It is diffraction-limited at 6.5 microns, and has wavelengthcoverage from 3-180 microns. Its estimated lifetime (limited by cryogen) is 2.5 years at minimum, with a goal of 5+ years. SIRTF has three instruments, IRAC, IRS, and MIPS. IRAC (InfraRed Array Camera) provides simultaneous images at wavelengths of 3.6, 4.5, 5.8, and 8.0 microns. IRS (InfraRed Spectrograph) has 4 modules providing low-resolution (R=60-120) spectra from 5.3 to 40 microns, high-resolution (R=600) spectra from 10 to 37 microns, and an autonomous target acquisition system (PeakUp) which includes small-field imaging at 15 microns. MIPS (Multiband Imaging Photometer for SIRTF)} does imaging photometry at 24, 70, and 160 m and low-resolution (R=15-25) spectroscopy (SED) between 55 and 96 microns. The SIRTF Guaranteed Time Observers (GTOs) are planning to observe Outer Solar System satellites and planets, extinct comets and low-albedo asteroids, Centaurs and Kuiper Belt Objects, cometary dust trails, and a few active short-period comets. The GTO programs are listed in detail in the SIRTF Reserved Observations Catalog (ROC). We would like to emphasize that there remain many interesting subjects for the General Observers (GO). Proposal success for the planetary observer community in the first SIRTF GO proposal cycle (GO-1) determines expectations for future GO calls and Solar System use of SIRTF, so we would like promote a strong set of planetary GO-1 proposals. Towards that end, we present this poster, and we will convene a Solar System GO workshop 3.5 months after launch.

  11. Multiple-etalon systems for the Advanced Technology Solar Telescope

    NASA Technical Reports Server (NTRS)

    Gary, G. Allen; Balasubramaniam, K. S.; Sigwarth, Michael

    2003-01-01

    Multiple etalon systems are discussed that meet the science requirements for a narrow-passband imaging system for the 4-meter National Solar Observatory (NSO)/Advance Technology Solar Telescope (ATST). A multiple etalon system can provide an imaging interferometer that works in four distinct modes: as a spectro-polarimeter, a filter-vector magnetograph, an intermediate-band imager, and broadband high-resolution imager. Specific dual and triple etalon configurations are described that provide a spectrographic passband of 2.0-3.5 micron and reduce parasitic light levels to 10(exp -4) as required for precise polarization measurement, e.g., Zeeman measurements of magnetic sensitive lines. A TESOS-like (Telecentric Etalon SOlar Spectrometer) triple etalon system provides a spectral purity of 10(exp -5). The triple designs have the advantage of reducing the finesse requirement on each etalon; allow the use of more stable blocking filters, and have very high spectral purity. A dual-etalon double-pass (Cavallini-like) system can provide a competing configuration. Such a dual-etalon design can provide high contrast. The selection of the final focal plane instrument will depend on a trade-off between an ideal instrument and practical reality. The trade study will include the number of etalons, their aperture sizes, complexities of the optical train, number of blocking filters, configuration of the electronic control system, computer interfaces, temperature controllers, etalon controllers, and their associated feedback electronics. The heritage of single and multiple etalon systems comes from their use in several observatories, including the Marshall Space Flight Center (MSFC) Solar Observatory, Sacramento Peak Observatory (NSO), and Kiepenheuer-Institut fur Sonnenphysik (KIS, Germany), Mees Solar Observatory (University of Hawaii), and Arcetri Astrophysical Observatory (Italy). The design of the ATST multiple etalon system will benefit from the experience gained at these

  12. Multiple Etalon Systems for the Advanced Technology Solar Telescope

    NASA Technical Reports Server (NTRS)

    Gary, G. Allen; Balasubramaniam, K. S.; Sigwarth, Michael; Six, N. Frank (Technical Monitor)

    2002-01-01

    Multiple etalons systems are discussed that meet the 4-meter NSO/Advance Technology Solar Telescope (http://www.nso.edu/ATST/index.html) instrument and science requirements for a narrow bandpass imaging system. A multiple etalon system can provide an imaging interferometer working in four distinct modes: as a spectro-polarimeter, a filter-vector magnetograph, and a wide-band and broad-band high-resolution imager. Specific dual and triple etalon configurations will be described that provides spectrographic passband of 2.0-3.5nm and reduces parasitic light levels to 1/10000 as required by precise polarization measurement, e.g., Zeeman measurements of magnetic sensitive lines. A TESOS-like triple etalon system provides for spectral purity of 100 thousandths. The triple designs have the advantage of reducing the finesse requirement on each etalon, allowing much more stable blocking filters, and can have very high spectral purity. A dual-etalon double-pass Cavallini-like configuration can provide a competing configuration. This design can provide high contrast with only a double etalon. The selection of the final focal plan instrument will depend on a trade-off of the ideal instrument versus reality, the number of etalons, the aperture of etalons, the number of blocking filters the electronic control system and computer interfaces, the temperature control and controllers for the etalons and the electronics. The use of existing experience should provide significant cost savings. The heritage of use of etalons and multiple etalon systems in solar physics come from a number of observatories, which includes MSFC Solar Observatory (NASA), Sac Peak Observatory (NSO), and Kiepenheuer Institute for Solar Physics (Germany), Mees Solar Observatory (University of Hawaii), and Arcetri Astrophysical Observatory (Italy). The design of the ATST multiple etalon system will reply on the existing experience from these observatories.

  13. Telescoping Solar Array Concept for Achieving High Packaging Efficiency

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin; Pappa, Richard; Warren, Jay; Rose, Geoff

    2015-01-01

    Lightweight, high-efficiency solar arrays are required for future deep space missions using high-power Solar Electric Propulsion (SEP). Structural performance metrics for state-of-the art 30-50 kW flexible blanket arrays recently demonstrated in ground tests are approximately 40 kW/cu m packaging efficiency, 150 W/kg specific power, 0.1 Hz deployed stiffness, and 0.2 g deployed strength. Much larger arrays with up to a megawatt or more of power and improved packaging and specific power are of interest to mission planners for minimizing launch and life cycle costs of Mars exploration. A new concept referred to as the Compact Telescoping Array (CTA) with 60 kW/cu m packaging efficiency at 1 MW of power is described herein. Performance metrics as a function of array size and corresponding power level are derived analytically and validated by finite element analysis. Feasible CTA packaging and deployment approaches are also described. The CTA was developed, in part, to serve as a NASA reference solar array concept against which other proposed designs of 50-1000 kW arrays for future high-power SEP missions could be compared.

  14. Investigation of Umbral Dots with the New Vacuum Solar Telescope

    NASA Astrophysics Data System (ADS)

    Ji, Kaifan; Jiang, Xia; Feng, Song; Yang, Yunfei; Deng, Hui; Wang, Feng

    2016-02-01

    Umbral dots (UDs) are small isolated brightenings observed in sunspot umbrae. They are convective phenomena existing inside umbrae. UDs are usually divided into central UDs (CUDs) and peripheral UDs (PUDs) according to their positions inside an umbra. Our purpose is to investigate UD properties and analyze their relationships, and further to find whether or not the properties depend on umbral magnetic field strengths. Thus, we selected high-resolution TiO images of four active regions (ARs) taken under the best seeing conditions with the New Vacuum Solar Telescope in the Fuxian Solar Observatory of the Yunnan Astronomical Observatory, China. The four ARs (NOAA 11598, 11801, 12158, and 12178) include six sunspots. A total of 1220 CUDs and 603 PUDs were identified. Meanwhile, the radial component of the vector magnetic field of the sunspots taken with the Helioseismic and Magnetic Imager on-board the Solar Dynamics Observatory was used to analyze relationships between UD properties and umbral magnetic field strengths. We find that diameters and lifetimes of UDs exhibit an increasing trend with the brightness, but velocities do not. Moreover, diameters, intensities, lifetimes and velocities depend on the surrounding magnetic field. A CUD diameter was found larger, the CUD brighter, its lifetime longer, and its motion slower in a weak umbral magnetic field environment than in a strong one.

  15. Layer-oriented adaptive optics for solar telescopes.

    PubMed

    Kellerer, Aglaé

    2012-08-10

    First multiconjugate adaptive-optical (MCAO) systems are currently being installed on solar telescopes. The aim of these systems is to increase the corrected field of view with respect to conventional adaptive optics. However, this first generation is based on a star-oriented approach, and it is then difficult to increase the size of the field of view beyond 60-80 arc sec in diameter. We propose to implement the layer-oriented approach in solar MCAO systems by use of wide-field Shack-Hartmann wavefront sensors conjugated to the strongest turbulent layers. The wavefront distortions are averaged over a wide field: the signal from distant turbulence is attenuated and the tomographic reconstruction is thus done optically. The system consists of independent correction loops, which only need to account for local turbulence: the subapertures can be enlarged and the correction frequency reduced. Most importantly, a star-oriented MCAO system becomes more complex with increasing field size, while the layer-oriented approach benefits from larger fields and will therefore be an attractive solution for the future generation of solar MCAO systems.

  16. First Solar System Results of the Spitzer Space Telescope

    NASA Technical Reports Server (NTRS)

    VanCleve, J.; Cruikshank, D. P.; Stansberry, J. A.; Burgdorf, M. J.; Devost, D.; Emery, J. P.; Fazio, G.; Fernandez, Y. R.; Glaccum, W.; Grillmair, C.

    2004-01-01

    The Spitzer Space Telescope, formerly known as SIRTF, is now operational and delivers unprecedented sensitivity for the observation of Solar System targets. Spitzer's capabilities and first general results were presented at the January 2004 AAS meeting. In this poster, we focus on Spitzer's performance for moving targets, and the first Solar System results. Spitzer has three instruments, IRAC, IRS, and MIPS. IRAC (InfraRed Array Camera) provides simultaneous images at wavelengths of 3.6, 4.5, 5.8, and 8.0 microns. IRS (InfraRed Spectrograph) has 4 modules providing low-resolution (R=60-120) spectra from 5.3 to 40 microns, high-resolution (R=600) spectra from 10 to 37 m, and an autonomous target acquisition system (PeakUp) which includes small-field imaging at 15 m. MIPS (Multiband Imaging Photometer for SIRTF) does imaging photometry at 24, 70, and 160 m and low-resolution (R=15-25) spectroscopy (SED) between 55 and 96 microns. Guaranteed Time Observer (GTO) programs include the moons of the outer Solar System, Pluto, Centaurs, Kuiper Belt Objects, and comets

  17. Electron-Proton and High Energy Telescopes for Solar Orbiter

    NASA Astrophysics Data System (ADS)

    Kulkarni, Shrinivasrao R.; Grunau, Jan; Boden, Sebastian; Steinhagen, Jan; Martin, Cesar; Wimmer-Schweingruber, Robert F.; Boettcher, Stephan; Rodríguez-Pacheco, Javier; Seimetz, Lars; Schuster, Bjoern; Kulemzin, Alexander; Wetzel, Moritz; Ravanbakhsh, Ali

    2013-04-01

    The Energetic Particle Detector (EPD) suite for ESA's Solar Orbiter will provide key measurements to address particle acceleration at and near the Sun. The EPD suite consists of five sensors (STEIN, SIS, EPT, LET and HET). The University of Kiel in Germany is responsible for the design, development, and build of EPT and HET which are presented here. The Electron Proton Telescope (EPT) is designed to cleanly separate and measure electrons in the energy range from 20 - 400 keV and protons from 20 - 7000 keV. The Solar Orbiter EPT electron measurements from 20 - 400 keV will cover the gap with some overlap between suprathermal electrons measured by STEIN and high energy electrons measured by HET. The proton measurements from 20 -7000 keV will cover the gap between STEIN and LET. The Electron and Proton Telescope relies on the magnet/foil-technique. The High-Energy Telescope (HET) on ESA's Solar Orbiter mission, will measure electrons from 300 keV up to about 30 MeV, protons from 10 -100 MeV, and heavy ions from ~20 to 200 MeV/nuc. Thus, HET covers the energy range which is of specific interest for studies of the space environment and will perform the measurements needed to understand the origin of high-energy events at the Sun which occasionally accelerate particles to such high energies that they can penetrate the Earth's atmosphere and be measured at ground level (ground-level events). These measurement capabilities are reached by a combination of solid-state detectors and a scintillator calorimeter which allows use of the dE/dx vs. total E technique for particle identification and energy measurement. The upper limits on energy listed above refer to particles (ions) stopping in the scintillator and careful modeling of HET properties will allow discrimination of forward/backward penetrating particles in a wider energy range. Here we present the current development status of EPT-HET units focusing on the test and calibration results obtained with the demonstration

  18. Calibration of the Multi-Spectral Solar Telescope Array multilayer mirrors and XUV filters

    NASA Technical Reports Server (NTRS)

    Allen, Maxwell J.; Willis, Thomas D.; Kankelborg, Charles C.; O'Neal, Ray H.; Martinez-Galarce, Dennis S.; Deforest, Craig E.; Jackson, Lisa; Lindblom, Joakim; Walker, Arthur B. C., Jr.; Barbee, Troy W., Jr.

    1993-01-01

    The Multi-Spectral Solar Telescope Array (MSSTA), a rocket-borne solar observatory, was successfully flown in May, 1991, obtaining solar images in eight XUV and FUV bands with 12 compact multilayer telescopes. Extensive measurements have recently been carried out on the multilayer telescopes and thin film filters at the Stanford Synchrotron Radiation Laboratory. These measurements are the first high spectral resolution calibrations of the MSSTA instruments. Previous measurements and/or calculations of telescope throughputs have been confirmed with greater accuracy. Results are presented on Mo/Si multilayer bandpass changes with time and experimental potassium bromide and tellurium filters.

  19. An astro-comb calibrated solar telescope to study solar activity and search for the radial velocity signature of Venus

    NASA Astrophysics Data System (ADS)

    Phillips, David; HARPS-N Collaboration

    2017-01-01

    We recently demonstrated sub-m/s sensitivity in measuring the radial velocity (RV) between the Earth and Sun using a simple solar telescope feeding the HARPS-N spectrograph at the Italian National Telescope, which is calibrated with a laser frequency comb calibrator optimized for calibrating high resolution spectrographs and referred to as an astro-comb. We are using the solar telescope to characterize the effects of stellar (solar) RV jitter due to activity on the solar surface over the course of many hours every clear day. With the help of solar satellites such as the Solar Dynamics Observatory (SDO), we are characterizing the correlation between observed RV and detailed imaging of the solar photosphere. We plan to use these tools to mitigate the effects of stellar jitter with the goal of the detection of Venus from its solar RV signature, thus showing the potential of the RV technique to detect true Earth-twins.

  20. Transverse Oscillations of Loops with Coronal Rain Observed by Hinode/Solar Optical Telescope

    NASA Astrophysics Data System (ADS)

    Antolin, P.; Verwichte, E.

    2011-08-01

    The condensations composing coronal rain, falling down along loop-like structures observed in cool chromospheric lines such as Hα and Ca II H, have long been a spectacular phenomenon of the solar corona. However, considered a peculiar sporadic phenomenon, it has not received much attention. This picture is rapidly changing due to recent high-resolution observations with instruments such as the Hinode/Solar Optical Telescope (SOT), CRISP of the Swedish 1-m Solar Telescope, and the Solar Dynamics Observatory. Furthermore, numerical simulations have shown that coronal rain is the loss of thermal equilibrium of loops linked to footpoint heating. This result has highlighted the importance that coronal rain can play in the field of coronal heating. In this work, we further stress the importance of coronal rain by showing the role it can play in the understanding of the coronal magnetic field topology. We analyze Hinode/SOT observations in the Ca II H line of a loop in which coronal rain puts in evidence in-phase transverse oscillations of multiple strand-like structures. The periods, amplitudes, transverse velocities, and phase velocities are calculated, allowing an estimation of the energy flux of the wave and the coronal magnetic field inside the loop through means of coronal seismology. We discuss the possible interpretations of the wave as either standing or propagating torsional Alfvén or fast kink waves. An estimate of the plasma beta parameter of the condensations indicates a condition that may allow the often observed separation and elongation processes of the condensations. We also show that the wave pressure from the transverse wave can be responsible for the observed low downward acceleration of coronal rain.

  1. TRANSVERSE OSCILLATIONS OF LOOPS WITH CORONAL RAIN OBSERVED BY HINODE/SOLAR OPTICAL TELESCOPE

    SciTech Connect

    Antolin, P.; Verwichte, E. E-mail: erwin.verwichte@warwick.ac.uk

    2011-08-01

    The condensations composing coronal rain, falling down along loop-like structures observed in cool chromospheric lines such as H{alpha} and Ca II H, have long been a spectacular phenomenon of the solar corona. However, considered a peculiar sporadic phenomenon, it has not received much attention. This picture is rapidly changing due to recent high-resolution observations with instruments such as the Hinode/Solar Optical Telescope (SOT), CRISP of the Swedish 1-m Solar Telescope, and the Solar Dynamics Observatory. Furthermore, numerical simulations have shown that coronal rain is the loss of thermal equilibrium of loops linked to footpoint heating. This result has highlighted the importance that coronal rain can play in the field of coronal heating. In this work, we further stress the importance of coronal rain by showing the role it can play in the understanding of the coronal magnetic field topology. We analyze Hinode/SOT observations in the Ca II H line of a loop in which coronal rain puts in evidence in-phase transverse oscillations of multiple strand-like structures. The periods, amplitudes, transverse velocities, and phase velocities are calculated, allowing an estimation of the energy flux of the wave and the coronal magnetic field inside the loop through means of coronal seismology. We discuss the possible interpretations of the wave as either standing or propagating torsional Alfven or fast kink waves. An estimate of the plasma beta parameter of the condensations indicates a condition that may allow the often observed separation and elongation processes of the condensations. We also show that the wave pressure from the transverse wave can be responsible for the observed low downward acceleration of coronal rain.

  2. First results from the CERN axion solar telescope.

    PubMed

    Zioutas, K; Andriamonje, S; Arsov, V; Aune, S; Autiero, D; Avignone, F T; Barth, K; Belov, A; Beltrán, B; Bräuninger, H; Carmona, J M; Cebrián, S; Chesi, E; Collar, J I; Creswick, R; Dafni, T; Davenport, M; Di Lella, L; Eleftheriadis, C; Englhauser, J; Fanourakis, G; Farach, H; Ferrer, E; Fischer, H; Franz, J; Friedrich, P; Geralis, T; Giomataris, I; Gninenko, S; Goloubev, N; Hasinoff, M D; Heinsius, F H; Hoffmann, D H H; Irastorza, I G; Jacoby, J; Kang, D; Königsmann, K; Kotthaus, R; Krcmar, M; Kousouris, K; Kuster, M; Lakić, B; Lasseur, C; Liolios, A; Ljubicić, A; Lutz, G; Luzón, G; Miller, D W; Morales, A; Morales, J; Mutterer, M; Nikolaidis, A; Ortiz, A; Papaevangelou, T; Placci, A; Raffelt, G; Ruz, J; Riege, H; Sarsa, M L; Savvidis, I; Serber, W; Serpico, P; Semertzidis, Y; Stewart, L; Vieira, J D; Villar, J; Walckiers, L; Zachariadou, K

    2005-04-01

    Hypothetical axionlike particles with a two-photon interaction would be produced in the sun by the Primakoff process. In a laboratory magnetic field ("axion helioscope"), they would be transformed into x-rays with energies of a few keV. Using a decommissioned Large Hadron Collider test magnet, the CERN Axion Solar Telescope ran for about 6 months during 2003. The first results from the analysis of these data are presented here. No signal above background was observed, implying an upper limit to the axion-photon coupling g(agamma)<1.16x10(-10) GeV-1 at 95% C.L. for m(a) less, similar 0.02 eV. This limit, assumption-free, is comparable to the limit from stellar energy-loss arguments and considerably more restrictive than any previous experiment over a broad range of axion masses.

  3. Deflectometry measurement of Daniel K. Inouye Solar Telescope primary mirror

    NASA Astrophysics Data System (ADS)

    Huang, Run; Su, Peng; Burge, James H.

    2015-08-01

    SCOTS (Software Configurable Optical Test System) is a high-precision slope measurement technique based on deflectometry. It utilizes a well-calibrated commercial LCD screen and a diffraction-limited camera to provide high dynamic range, non-contact and full-field metrology of reflective/refractive optics of high accuracy but low cost. Recently, we applied this metrology method on the fabrication of the primary mirror of Daniel K. Inouye Solar Telescope (DKIST), which is a 4.2 meter off-axis parabolic segment with more than 8 mm peak-to-valley aspheric departure. Sophisticated calibrations and compensations including camera mapping, screen nonlinearity and screen shape deformation are performed to achieve high accuracy measurement results. By measuring the mirror at different orientations, non-symmetrical systematic errors are eliminated. The metrology system also includes dual cameras that provide self- verification test. The measurement results are being used to guide the fabrication process.

  4. Surveying the Inner Solar System with an Infrared Space Telescope

    NASA Astrophysics Data System (ADS)

    Buie, Marc W.; Reitsema, Harold J.; Linfield, Roger P.

    2016-11-01

    We present an analysis of surveying the inner solar system for objects that may pose some threat to Earth. Most of the analysis is based on understanding the capability provided by Sentinel, a concept for an infrared space-based telescope placed in a heliocentric orbit near the distance of Venus. From this analysis, we show that (1) the size range being targeted can affect the survey design, (2) the orbit distribution of the target sample can affect the survey design, (3) minimum observational arc length during the survey is an important metric of survey performance, and (4) surveys must consider objects as small as D=15{--}30 m to meet the goal of identifying objects that have the potential to cause damage on Earth in the next 100 yr. Sentinel will be able to find 50% of all impactors larger than 40 m in a 6.5 yr survey. The Sentinel mission concept is shown to be as effective as any survey in finding objects bigger than D = 140 m but is more effective when applied to finding smaller objects on Earth-impacting orbits. Sentinel is also more effective at finding objects of interest for human exploration that benefit from lower propulsion requirements. To explore the interaction between space and ground search programs, we also study a case where Sentinel is combined with the Large Synoptic Survey Telescope (LSST) and show the benefit of placing a space-based observatory in an orbit that reduces the overlap in search regions with a ground-based telescope. In this case, Sentinel+LSST can find more than 70% of the impactors larger than 40 m assuming a 6.5 yr lifetime for Sentinel and 10 yr for LSST.

  5. HUBBLE SPACE TELESCOPE SPECTROPHOTOMETRY AND MODELS FOR SOLAR ANALOGS

    SciTech Connect

    Bohlin, R. C.

    2010-04-15

    Absolute flux distributions for seven solar analog stars are measured from 0.3 to 2.5 {mu}m by Hubble Space Telescope (HST) spectrophotometry. In order to predict the longer wavelength mid-IR fluxes that are required for James Webb Space Telescope calibration, the HST spectral energy distributions are fit with Castelli and Kurucz model atmospheres; and the results are compared with fits from the MARCS model grid. The rms residuals in 10 broadband bins are all <0.5% for the best fits from both model grids. However, the fits differ systematically: the MARCS fits are 40-100 K hotter in T {sub eff}, 0.25-0.80 higher in log g, 0.01-0.10 higher in log z, and 0.008-0.021 higher in the reddening E(B - V), probably because their specifications include different metal abundances. Despite these differences in the parameters of the fits, the predicted mid-IR fluxes differ by only {approx}1%; and the modeled flux distributions of these G stars have an estimated ensemble accuracy of 2% out to 30 {mu}m.

  6. A broad band imager for the European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Munari, Matteo; Scuderi, Salvatore; Cecconi, Massimo

    2012-09-01

    We report on the results of the conceptual design study of a broad band imager for the European Solar Telescope (EST), a joint project of several European research institutes to design and realize a 4-m class solar telescope. The EST broad band imager is an imaging instrument whose function is to obtain diffraction limited images over the full field of view of EST at multiple wavelengths and high frame rate. Its scientific objective is the study of fundamental astrophysical processes at their intrinsic scales in the Sun's atmosphere. The optical layout foresee two observational modes: a maximum field of view mode and a high resolution mode. The imager will have a 2'x2' corrected field of view in the first mode and an angular resolution better than 0.04" at 500nm in the latter mode. The imager will cover a wavelength range spanning from 390nm to 900nm through a number of filters with bandpasses between 0.05nm and 0.5nm. The selected optical layout is an all refractive design. To optimize optical performances and throughput there will be two arms working simultaneously: a blue arm (covering the 380nm - 500nm range) and a red arm (600nm - 900nm). The blue arm will have two channels while the red arm only one. Each channel will be divided in three subchannels: one will host narrow band filters for chromospheric observations, another one, in focus wide band filters used as reference for speckle reconstruction and photospheric observations, and the last one, out of focus wide band filters for phase diversity reconstruction of photospheric observations.

  7. Solar System Studies with the Space Infrared Telescope Facility (SIRTF)

    NASA Technical Reports Server (NTRS)

    Cruikshank, Dale P.; DeVincenzi, Donald L. (Technical Monitor)

    1998-01-01

    SIRTF (Space Infrared Telescope Facility) is the final element in NASA's 'Great Observatories' program. It consists of an 85-cm cryogenically-cooled observatory for infrared astronomy from space. SIRTF is scheduled for launch in late 2001 or early 2002 on a Delta rocket into a heliocentric orbit trailing the Earth. Data from SIRTF will be processed and disseminated to the community through the SIRTF Science Center (SSC) located at the Infrared Processing and Analysis Center (IPAC) at Caltech. Some 80/% of the total observing time (estimated at a minimum of 7500 hours of integration time per year for the mission lifetime of about 4 years) will be available to the scientific community at large through a system of refereed proposals. Three basic instruments are located in the SIRTF focal plane. The Multiband Imaging Photometer (MIPS), the Infrared Array Camera (IRAC), and the Infrared Spectrometer (IRS), taken together, provide imaging and spectroscopy from 3.5 to 160 microns. Among the solar system studies suited to SIRTF are the following: 1) spectroscopy and radiometry of small bodies from the asteroid main belt, through the Trojan clouds, to the Kuiper Disk; 2) dust distribution in the zodiacal cloud and the Earth's heliocentric dust ring; 3) spectroscopy and radiometry of comets; and 4) spectroscopy and radiometry of planets and their satellites. Searches for, and studies of dust disks around other stars, brown dwarfs, and superplanets will also be conducted with SIRTF. The SORTIE web site (http://ssc.ipac.caltech.edu/sirtf) contains important details and documentation on the project, the spacecraft, the telescope, instruments, and observing procedures. A community-wide workshop for solar system studies with SIRTF is in the planning stages by the author and Martha S. Hanner for the summer of 1999.

  8. Thin film multilayer filters for solar EUV telescopes.

    PubMed

    Chkhalo, N I; Drozdov, M N; Kluenkov, E B; Kuzin, S V; Lopatin, A Ya; Luchin, V I; Salashchenko, N N; Tsybin, N N; Zuev, S Yu

    2016-06-10

    Al, with a passband in the wavelength range of 17-60 nm, and Zr, with a passband in the wavelength range of 6.5-17 nm, thin films on a support grid or support membrane are frequently used as UV, visible, and near-IR blocking filters in solar observatories. Although they possess acceptable optical performance, these filters also have some shortcomings such as low mechanical strength and low resistance to oxidation. These shortcomings hinder meeting the requirements for filters of future telescopes. We propose multilayer thin film filters on the basis of Al, Zr, and other materials with improved characteristics. It was demonstrated that stretched multilayer films on a support grid with a mesh size up to 5 mm can withstand vibration loads occurring during spacecraft launch. A large mesh size is preferable for filters of high-resolution solar telescopes, since it allows image distortion caused by light diffraction on the support grid to be avoided. We have investigated the thermal stability of Al/Si and Zr/Si multilayers assuming their possible application as filters in the Intergelioprobe project, in which the observation of coronal plasma will take place close to the Sun. Zr/Si films show high thermal stability and may be used as blocking filters in the wavelength range of 12.5-17 nm. Al/Si films show lower thermal stability: a significant decrease in the film's transmission in the EUV spectral range and an increase in the visible spectrum have been observed. We suppose that the low thermal stability of Al/Si films restricts their application in the Intergelioprobe project. Thus, there is a lack of filters for the wavelength range of λ>17  nm. Be/Si and Cr/Si filters have been proposed for the wavelength range near 30.4 nm. Although these filters have lower transparency than Al/Si, they are superior in thermal stability. Multilayer Sc/Al filters with relatively high transmission at a wavelength of 58.4 nm (HeI line) and simultaneously sufficient rejection in the

  9. The dynamic solar chromosphere: recent advances from high resolution telescopes

    NASA Astrophysics Data System (ADS)

    Tziotziou, Konstantinos; Tsiropoula, Georgia

    This review focuses on the solar chromosphere, a very inhomogeneous and dynamic layer that exhibits phenomena on a large range of spatial and temporal scales. High-resolution observa-tions from existing telescopes (DST, SST, DOT), as well as long-duration observations with Hinode's SOT employing lines such as the Ca II infrared lines, the Ca II HK and above all the Hα line reveal an incredibly rich, dynamic and highly structured environment, both in quiet and active regions. The fine-structure chromosphere, is mainly constituted by fibrilar features that connect various parts of active regions or span across network cell interiors. We discuss this highly dynamical solar chromosphere, especially below the magnetic canopy, which is gov-erned by flows reflecting both the complex geometry and dynamics of the magnetic field and the propagation and dissipation of waves in the different atmospheric layers. A comprehensive view of the fine-structure chromosphere requires deep understanding of the physical processes involved, investigation of the intricate link with structures/processes at lower photospheric lev-els and analysis of its impact on the mass and energy transport to higher atmospheric layers through flows resulting from different physical processes such as magnetic reconnection and waves. Furthermore, we assess the challenges facing theory and numerical modelling which require the inclusion of several physical ingredients, such as non-LTE and three-dimensional numerical simulations.

  10. Solar System science with the Large Synoptic Survey Telescope

    NASA Astrophysics Data System (ADS)

    Jones, Lynne; Brown, Mike; Ivezić, Zeljko; Jurić, Mario; Malhotra, Renu; Trilling, David

    2015-11-01

    The Large Synoptic Survey Telescope (LSST; http://lsst.org) will be a large-aperture, wide-field, ground-based telescope that will survey half the sky every few nights in six optical bands from 320 to 1050 nm. It will explore a wide range of astrophysical questions, ranging from performing a census of the Solar System, to examining the nature of dark energy. It is currently in construction, slated for first light in 2019 and full operations by 2022.The LSST will survey over 20,000 square degrees with a rapid observational cadence, to typical limiting magnitudes of r~24.5 in each visit (9.6 square degree field of view). Automated software will link the individual detections into orbits; these orbits, as well as precisely calibrated astrometry (~50mas) and photometry (~0.01-0.02 mag) in multiple bandpasses will be available as LSST data products. The resulting data set will have tremendous potential for planetary astronomy; multi-color catalogs of hundreds of thousands of NEOs and Jupiter Trojans, millions of asteroids, tens of thousands of TNOs, as well as thousands of other objects such as comets and irregular satellites of the major planets.LSST catalogs will increase the sample size of objects with well-known orbits 10-100 times for small body populations throughout the Solar System, enabling a major increase in the completeness level of the inventory of most dynamical classes of small bodies and generating new insights into planetary formation and evolution. Precision multi-color photometry will allow determination of lightcurves and colors, as well as spin state and shape modeling through sparse lightcurve inversion. LSST is currently investigating survey strategies to optimize science return across a broad range of goals. To aid in this investigation, we are making a series of realistic simulated survey pointing histories available together with a Python software package to model and evaluate survey detections for a user-defined input population. Preliminary

  11. DOT tomography of the solar atmosphere. I. Telescope summary and program definition

    NASA Astrophysics Data System (ADS)

    Rutten, R. J.; Hammerschlag, R. H.; Bettonvil, F. C. M.; Sütterlin, P.; de Wijn, A. G.

    2004-01-01

    The Dutch Open Telescope (DOT) on La Palma is an innovative optical solar telescope capable of reaching 0.2 arcsec angular resolution over extended durations. The DOT presently progresses from technology testbed to a stable science configuration providing multi-wavelength imaging and multi-camera speckle data acquisition for tomographic mapping of the solar atmosphere. Large-volume speckle processing will soon enable frequent usage and community-wide time allocation, in particular for tandem operation with other solar telescopes pursuing spectropolarimetry and EUV imaging. We summarize the DOT hardware and software in the context of this increasing availability and outline the corresponding ``open-DOT'' program.

  12. The Focal Plane Package of the Solar Optical telescope on Solar B

    NASA Astrophysics Data System (ADS)

    Tarbell, Theodore D.

    2006-06-01

    The Solar-B satellite will be launched into a full-sun low-earth orbit in the fall of 2006 from Japan's Uchinoura Space center. It includes the 50-cm diameter Solar Optical Telescope with its Focal Plane Package (FPP), for near-UV and visible observations of the photosphere and chromosphere at very high (diffraction limited) angular resolution. The FPP has a Spectro-Polarimeter (SP) for precision measurements of photospheric vector magnetic fields over a 160 x 320 arcsecond field of view; a Narrowband Filter Imager (NFI) with a tunable birefringent filter for magnetic, Doppler, and intensity maps over the same field of view; and a Broadband Filter Imager (BFI) for highest resolution images in six wavelengths (G band, Ca II H, continua, etc.) over two-thirds of that field of view. A polarization modulator in the telescope allows measurement of Stokes parameters at all wavelengths in the SP and NFI. The NFI wavelengths include both photospheric and chromospheric lines (Fe I, Mg b, Na D, H-alpha). All images are stabilized by a tip-tilt mirror and correlation tracker. This presentation will include pictures and description of the instrument, results from calibration and sun testing, portions of the draft science plan, and some preliminary JOP's. Solar-B is an international cooperative mission between JAXA/ISAS of Japan, NASA of the United States, and PPARC of the United Kingdom. The Solar Optical Telescope has been developed by the National Astronomical Observatory of Japan, Mitsubishi Electric Company, and JAXA/ISAS. The FPP has been developed by the Lockheed Martin Advanced Technology Center, High Altitude Observatory, and NASA.

  13. Multi-conjugate AO for the European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Montilla, I.; Béchet, C.; Le Louarn, M.; Tallon, M.; Sánchez-Capuchino, J.; Collados Vera, M.

    2012-07-01

    The European Solar Telescope (EST) will be a 4-meter diameter world-class facility, optimized for studies of the magnetic coupling between the deep photosphere and upper chromosphere. It will specialize in high spatial resolution observations and therefore it has been designed to incorporate an innovative built-in Multi-Conjugate Adaptive Optics system (MCAO). It combines a narrow field high order sensor that will provide the information to correct the ground layer and a wide field low order sensor for the high altitude mirrors used in the MCAO mode. One of the challenging particularities of solar AO is that it has to be able to correct the turbulence for a wide range of observing elevations, from zenith to almost horizon. Also, seeing is usually worse at day-time, and most science is done at visible wavelengths. Therefore, the system has to include a large number of high altitude deformable mirrors. In the case of the EST, an arrangement of 4 high altitude DMs is used. Controlling such a number of mirrors makes it necessary to use fast reconstruction algorithms to deal with such large amount of degrees of freedom. For this reason, we have studied the performance of the Fractal Iterative Method (FriM) and the Fourier Transform Reconstructor (FTR), to the EST MCAO case. Using OCTOPUS, the end-to-end simulator of the European Southern Observatory, we have performed several simulations with both algorithms, being able to reach the science requirement of a homogeneous Strehl higher that 50% all over the 1 arcmin field of view.

  14. Solar System Observations with Spitzer Space Telescope: Preliminary Results

    NASA Technical Reports Server (NTRS)

    Cruikshank, Dale P.

    2005-01-01

    The programs of observations of Solar System bodies conducted in the first year of the operation of the Spitzer Space Telescope as part of the Guaranteed Observing Time allocations are described. Initial results include the determination of the albedos of a number of Kuiper Belt objects and Centaurs from observations of their flux densities at 24 and 70 microns, and the detection of emission bands in the spectra of several distant asteroids (Trojans) around 10 and 25 microns. The 10 Kuiper Belt objects observed to date have albedos in the range 0.08 - 0.15, significantly higher than the earlier estimated 0.04. An additional KBO [(55565) 2002 AW(sub l97)] has an albedo of 0.17 plus or minus 0.03. The emission bands in the asteroid spectra are indicative of silicates, but specific minerals have not yet been identified. The Centaur/comet 29P/Schwassmann-Wachmann 1 has a nucleus surface albedo of 0.025 plus or minus 0.01, and its dust production rate was calculated from the properties of the coma. Several other investigations are in progress as the incoming data are processed and analyzed.

  15. Functional safety for the Advanced Technology Solar Telescope

    NASA Astrophysics Data System (ADS)

    Bulau, Scott; Williams, Timothy R.

    2012-09-01

    Since inception, the Advanced Technology Solar Telescope (ATST) has planned to implement a facility-wide functional safety system to protect personnel from harm and prevent damage to the facility or environment. The ATST will deploy an integrated safety-related control system (SRCS) to achieve functional safety throughout the facility rather than relying on individual facility subsystems to provide safety functions on an ad hoc basis. The Global Interlock System (GIS) is an independent, distributed, facility-wide, safety-related control system, comprised of commercial off-the-shelf (COTS) programmable controllers that monitor, evaluate, and control hazardous energy and conditions throughout the facility that arise during operation and maintenance. The GIS has been designed to utilize recent advances in technology for functional safety plus revised national and international standards that allow for a distributed architecture using programmable controllers over a local area network instead of traditional hard-wired safety functions, while providing an equivalent or even greater level of safety. Programmable controllers provide an ideal platform for controlling the often complex interrelationships between subsystems in a modern astronomical facility, such as the ATST. A large, complex hard-wired relay control system is no longer needed. This type of system also offers greater flexibility during development and integration in addition to providing for expanded capability into the future. The GIS features fault detection, self-diagnostics, and redundant communications that will lead to decreased maintenance time and increased availability of the facility.

  16. Daniel K. Inouye Solar Telescope: integration, testing, and commissioning planning

    NASA Astrophysics Data System (ADS)

    Craig, Simon; Gonzales, Kerry; Hubbard, Robert P.; Liang, Chen; Kneale, Ruth A.; McBride, William R.; Sekulic, Predrag; Williams, Timothy R.

    2016-08-01

    The Daniel K. Inouye Solar Telescope (DKIST) has been in its construction phase since 2010, anticipating the onset of the integration, test, and commissioning (IT&C) phase in early 2017, and the commencement of science verification in 2019. The works on Haleakala are progressing at a phenomenal rate and many of the various subsystems are either through or about to enter their Factory (or Laboratory) acceptance. The delays in obtaining site planning permissions, while a serious issue for Project Management, has allowed the sub-systems to develop well ahead of their required delivery to site. We have benefited from the knowledge that many sub-systems will be on site and ready for integration well before affecting the critical path. Opportunities have been presented for additional laboratory/factory testing which, while not free, significantly reduce the risks of potential delays and rework on site. From the perspective of IT&C this has provided an opportunity to develop the IT&C plans and schedules free from the pressures of imminent deployment. In this paper we describe the ongoing planning of the Integration, Testing and Commissioning (IT&C) phase of the project in particular the detailed planning phase that we are currently developing.

  17. Cooling a solar telescope enclosure: plate coil thermal analysis

    NASA Astrophysics Data System (ADS)

    Gorman, Michael; Galapon, Chriselle; Montijo, Guillermo; Phelps, LeEllen; Murga, Gaizka

    2016-08-01

    The climate of Haleakalā requires the observatories to actively adapt to changing conditions in order to produce the best possible images. Observatories need to be maintained at a temperature closely matching ambient or the images become blurred and unusable. The Daniel K. Inouye Solar Telescope is a unique telescope as it will be active during the day as opposed to the other night-time stellar observatories. This means that it will not only need to constantly match the ever-changing temperature during the day, but also during the night so as not to sub-cool and affect the view field of other telescopes while they are in use. To accomplish this task, plate coil heat exchanger panels will be installed on the DKIST enclosure that are designed to keep the temperature at ambient temperature +0°C/-4°C. To verify the feasibility of this and to validate the design models, a test rig has been installed at the summit of Haleakalā. The project's purpose is to confirm that the plate coil panels are capable of maintaining this temperature throughout all seasons and involved collecting data sets of various variables including pressures, temperatures, coolant flows, solar radiations and wind velocities during typical operating hours. Using MATLAB, a script was written to observe the plate coil's thermal performance. The plate coil did not perform as expected, achieving a surface temperature that was generally 2ºC above ambient temperature. This isn't to say that the plate coil does not work, but the small chiller used for the experiment was undersized resulting in coolant pumped through the plate coil that was not supplied at a low enough temperature. Calculated heat depositions were about 23% lower than that used as the basis of the design for the hillers to be used on the full system, a reasonable agreement given the fact that many simplifying assumptions were used in the models. These were not carried over into the testing. The test rig performance showing a 23% margin

  18. Optical focusing and alignment of the Multi-Spectral Solar Telescope Array II payload

    NASA Astrophysics Data System (ADS)

    Gore, David B.; Hadaway, James B.; Hoover, Richard B.; Walker, Arthur B.; Kankelborg, Charles C.

    1995-06-01

    The Multi-Spectral Solar Telescope Array (MSSTA) is a sounding rocket borne observatory designed to image the sun at many spectral lines in soft x-ray, EUV, and FUV wavelengths. Of the nineteen telescopes flown on November 3, 1994 the two Cassegrain telescopes and three of the six Ritchey-Cretien telescopes were focussed at NASA/Marshall Space Flight Center (MSFC) with a Zygo double-pass interferometer to determine the best positions of back focus. The remaining three Ritchey-Cretien and eleven Herschellian telescopes were focussed in situ at White Sands Missile Range by magnifying the telescopic image through a Gaertner traveling microscope and recording the position of best focus. From the data obtained at visible wavelengths, it is not unreasonable to expect that many of our telescopes did attain the sub-arc second resolution for which they were designed.

  19. Study of a Solar X-Ray Telescope

    NASA Technical Reports Server (NTRS)

    Golub, Leon

    1997-01-01

    the spatial resolution of the observing instrument, this effect will not be directly observable. For organizational purposes, we provide a listing of some scientific objectives for a Solar-B x-ray telescope, arranged in terms of identifiable features in the corona.

  20. Narrow-band Imager for Multi-Application Solar Telescope (MAST) at Udaipur Solar Observatory

    NASA Astrophysics Data System (ADS)

    Raja Bayanna, A.; Mathew, Shibu K.; Venkatakrishnan, Parameswaran; Srivastava, Nandita

    2013-04-01

    Multi-Application Solar Telescope (MAST) is an off-axis Gregorian solar telescope of 50 cm clear aperture installed at the lake site of Udaipur solar observatory (USO). A narrow band imager is being developed for near simultaneous observations of the solar atmosphere at different heights. The heart of the system is two Fabry-Perot (FP) etalons working in tandem. The substrate of the etalons is made of Lithium Niobate electro-optic crystal. The filter is tuned by changing the refractive index of the crystal with the application of the voltage. It is important to know the voltage required per unit wavelength shift to tune the system for different wavelength regions for near simultaneous observations. A littrow spectrograph was set up to calibrate the FP etalons. The achieved spectral resolution with the spectrograph at 6173 Å is 35 mÅ. Calibration is carried-out for the Fe I 6173 Å, H-alpha 6563 Å and Ca K 8542 Å. Free spectral range (FSR) obtained for FP1 and FP2 in tandem for 6173 Å is 6.7Å and 150 mÅ respectively. Voltage range of the system allows us to scan the entire line profile of 6173 in the range of ±220 mÅ with a sampling of 20 mÅ. We also performed temperature tuning and voltage tuning of the system. Similar exercise is performed for other two wavelengths. Here we present the details of the calibration set-up and obtained parameters and first-light results of the system.

  1. Slipping reconnection in a solar flare observed in high resolution with the GREGOR solar telescope

    NASA Astrophysics Data System (ADS)

    Sobotka, M.; Dudík, J.; Denker, C.; Balthasar, H.; Jurčák, J.; Liu, W.; Berkefeld, T.; Collados Vera, M.; Feller, A.; Hofmann, A.; Kneer, F.; Kuckein, C.; Lagg, A.; Louis, R. E.; von der Lühe, O.; Nicklas, H.; Schlichenmaier, R.; Schmidt, D.; Schmidt, W.; Sigwarth, M.; Solanki, S. K.; Soltau, D.; Staude, J.; Strassmeier, K. G.; Volkmer, R.; Waldmann, T.

    2016-11-01

    A small flare ribbon above a sunspot umbra in active region 12205 was observed on November 7, 2014, at 12:00 UT in the blue imaging channel of the 1.5 m GREGOR telescope, using a 1 Å Ca ii H interference filter. Context observations from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO), the Solar Optical Telescope (SOT) onboard Hinode, and the Interface Region Imaging Spectrograph (IRIS) show that this ribbon is part of a larger one that extends through the neighboring positive polarities and also participates in several other flares within the active region. We reconstructed a time series of 140 s of Ca ii H images by means of the multiframe blind deconvolution method, which resulted in spatial and temporal resolutions of 0.1″ and 1 s. Light curves and horizontal velocities of small-scale bright knots in the observed flare ribbon were measured. Some knots are stationary, but three move along the ribbon with speeds of 7-11 km s-1. Two of them move in the opposite direction and exhibit highly correlated intensity changes, which provides evidence of a slipping reconnection at small spatial scales. Movies associated to Figs. 1 and 2 are available at http://www.aanda.org

  2. The IMaX polarimeter for the solar telescope SUNRISE of the NASA long duration balloon program

    NASA Astrophysics Data System (ADS)

    Alvarez-Herrero, A.; Martínez-Pillet, V.; Del Toro Iniesta, J. C.; Domingo, V.

    2010-06-01

    On June 8th 2009 the SUNRISE mission was successfully launched. This mission consisted of a 1m aperture solar telescope on board of a stratospheric balloon within the Long Duration Balloon NASA program. The flight followed the foreseen circumpolar trajectory over the Artic and the duration was 5 days and 17 hours. One of the two postfocal instruments onboard was IMaX, the Imaging Magnetograph eXperiment. This instrument is a solar magnetograph which is a diffraction limited imager capable to resolve 100 km on the solar surface, and simultaneously a high sensitivity polarimeter (<10-3) and a high resolution spectrograph (bandwidth <70mÅ). The magnetic vectorial map can be extracted thanks to the well-know Zeeman effect, which takes place in the solar atoms, allowing to relate polarization and spectral measurements to magnetic fields. The technological challenge of the IMaX development has a special relevance due to the utilization of innovative technologies in the Aeroespacial field and it is an important precedent for future space missions such as Solar Orbiter from ESA. Among these novel technologies the utilization of Liquid Crystal Variable Retarders (LCVRs) as polarization modulators and a LiNbO3 etalon as tunable spectral filter are remarkable. Currently the data obtained is being analyzed and the preliminary results show unprecedented information about the solar dynamics.

  3. Solar system radio emissions studies with the largest low-frequency radio telescopes

    NASA Astrophysics Data System (ADS)

    Zakharenko, V.; Konovalenko, A.; Litvinenko, G.; Kolyadin, V.; Zarka, P.; Mylostna, K.; Vasylieva, I.; Griessmeier, J.-M.; Sidorchuk, M.; Rucker, H.; Fischer, G.; Cecconi, B.; Coffre, A.; Denis, L.; Shevchenko, V.; Nikolaenko, V.

    2014-04-01

    We describe the trends and tasks in the field of lowfrequency studies of radio emission from the Solar system's objects. The world's largest decameter radio telescopes UTR-2 and URAN have a unique combination of sensitivity and time/frequency resolution parameters, providing the capability of the most detailed studies of various types of solar and planetary emissions.

  4. SUAVE: a UV telescope for space weather and solar variability studies

    NASA Astrophysics Data System (ADS)

    Damé, L.; Meftah, M.; Irbah, A.; Hauchecorne, A.; Keckhut, P.; Quémerais, E.

    2014-07-01

    SUAVE (Solar Ultraviolet Advanced Variability Experiment) is a far ultraviolet (FUV) imaging solar telescope of novel design for ultimate thermal stability and long lasting performances. SUAVE is a 90 mm Ritchey- Chrétien telescope with SiC (Silicon Carbide) mirrors and no entrance window for long and uncompromised observations in the UV (no coatings of mirrors, flux limited to less than a solar constant on filters to avoid degradation), associated with an ultimate thermal control (heat evacuation, focus control, stabilization). Design of the telescope and early thermal modeling leading to a representative breadboard (a R and T program supported by CNES) will be presented. SUAVE is the main instrument of the SUITS (Solar Ultraviolet Influence on Troposphere/Stratosphere) microsatellite mission, a small-size mission proposed to CNES and ESA.

  5. Kees Zwaan, open principle, future of high-resolution solar telescopes

    NASA Astrophysics Data System (ADS)

    Hammerschlag, R. H.; Bettonvil, F. C. M.

    2013-01-01

    It was around the 1970s that during site-test campaigns masts were erected up till 30 m height with sensors at several heights for the measurement of temperature fluctuations. Kees Zwaan discovered that the fluctuations decrease drastically at heights from about 15 m and upward when there is some wind. The conclusion from this experience was the open telescope principle: a telescope completely free in the air 15 m or more above the ground. The Dutch Open Telescope (DOT) was the pioneering demonstrator of the open-telescope technology. Now that larger high-resolution telescopes come in view, it is time to analyze again the principle: the essentials for proper working of the open principle and the design consequences for the new generation of high-resolution solar telescopes.

  6. Cornelis Zwaan, open principle, and the future of high-resolution solar telescopes

    NASA Astrophysics Data System (ADS)

    Hammerschlag, Robert H.; Bettonvil, Felix C. M.; Jägers, Aswin P. L.; Sliepen, Guus

    2008-07-01

    It was in the years around 1970 that during site-test campaigns for JOSO masts were erected up till 30 m height with sensors at several heights for the measurement of temperature fluctuations. Cornelis (Kees) Zwaan discovered that the fluctuations decrease drastically at heights from about 15 m and upward when there is some wind. The conclusion from this experience was the open telescope principle: the telescope should be completely free in the air 15 m or more above the ground. The Dutch Open Telescope (DOT) was the pioneering demonstrator of the open-telescope technology. Now that larger high-resolution telescopes come in view, it is time to analyze again the principle: (i) the essentials for proper working of the open principle; (ii) the differences with nighttime observations particularly concerning the seeing; (iii) the design consequences for the new generation of high-resolution solar telescopes.

  7. FalconSAT-7: A Photon Sieve Solar Telescope

    DTIC Science & Technology

    2011-09-01

    technology has only incrementally improved in areal mass since the beginning of space -based imagery. For example, the Hubble Space Telescope has a mirror... space -based photon sieve telescope from a CubeSat platform. Fig. 1: Solid Works picture of Peregrine, a 0.2m photon sieve deployed from a 3U...with 180 kg/m2 while the James Webb Space Telescope has reduced this to just 25 kg/m2 over a quarter of a century later. Not only is size an issue

  8. Optomechanical and thermal design of the Multi-Application Solar Telescope for USO

    NASA Astrophysics Data System (ADS)

    Denis, Stefan; Coucke, Pierre; Gabriel, Eric; Delrez, Christophe; Venkatakrishnan, Parameshwaran

    2008-07-01

    The Multi-Application Solar Telescope (MAST) is a 50 cm diameter class telescope to be installed on the Udaipur Solar Observatory's Island on the Lake Fatehsagar in Udaipur, India. It is dedicated to solar observation. The telescope is designed, manufactured, assembled and installed on-site by the belgian company AMOS SA for the Udaipur Solar Observatory (USO), an academic division of the Physical Research Laboratory (PRL) in India. Despite its limited size, the telescope is expected to be competitive with respect to worldwide large and costly projects thanks to its versatility regarding science goals and also thanks to its demanding optomechanical and thermal specification. This paper describes the optomechanical and thermal design of this telescope and presents solutions adopted by AMOS to meet the specific requirements. The optical configuration of the telescope is based on an afocal off-axis gregorian combination integrated on an Alt.-Az. mechanical mount, with a suite of flat folding mirrors to provide the required stationary collimated beam.

  9. Characterization of optical turbulence at the GREGOR solar telescope: temporal and local behavior and its influence on the solar observations

    NASA Astrophysics Data System (ADS)

    Sprung, D.; Sucher, E.; Stein, K.; von der Lühe, O.; Berkefeld, Th.

    2016-10-01

    Local atmospheric turbulence at the telescope level is regarded as a major reason for affecting the performance of the adaptive optics systems using wavelengths in the visible and infrared for solar observations. During the day the air masses around the telescope dome are influenced by flow distortions. Additionally heating of the infrastructure close to telescope causes thermal turbulence. Thereby optical turbulence is produced and leads to quality changes in the local seeing throughout the day. Image degradation will be yielded affecting the performance of adaptive optical systems. The spatial resolution of the solar observations will be reduced. For this study measurements of the optical turbulence, represented by the structure function parameter of the refractive index Cn2 were performed on several locations at the GREGOR telescope at the Teide observatory at Tenerife at the Canary Islands / Spain. Since September 2012 measurements of Cn2 were carried out between the towers of the Vacuum Tower Telescope (VTT) and of GREGOR with a laser-scintillometer. The horizontal distance of the measurement path was about 75 m. Additional from May 2015 up to March 2016 the optical turbulence was determined at three additional locations close to the solar telescope GREGOR. The optical turbulence is derived from sonic anemometer measurements. Time series of the sonic temperature are analyzed and compared to the direct measurements of the laser scintillometer. Meteorological conditions are investigated, especially the influence of the wind direction. Turbulence of upper atmospheric layers is not regarded. The measured local turbulence is compared to the system performance of the GREGOR telescopes. It appears that the mountain ridge effects on turbulence are more relevant than any local causes of seeing close to the telescope. Results of these analyses and comparison of nearly one year of measurements are presented and discussed.

  10. STS-31 Hubble Space Telescope (HST) solar array (SA) mockup at MSFC, Alabama

    NASA Technical Reports Server (NTRS)

    1990-01-01

    A close-up shot shows an extravehicular mobility unit (EMU)-suited astronaut inspecting a solar array (SA) on the Hubble Space Telescope (HST) mockup in the Neutral Buoyancy Simulator (NBS) at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. MSFC managed the design and development of the telescope. The weightlessness simulator was used to practice SA contingency procedures that might be used in space. Astronauts also practiced SA servicing missions in the simulator which they will perform on the telescope in space. The solar arrays which supply electrical power to the space telescope were developed and contributed by the European Space Agency (ESA). ESA's two prime contractors were British Aerospace in England and AEG in West Germany. The two wing-like solar arrays contain 48,000 solar cells. They convert the sun's energy to electricity during that portion of an orbit when they are exposed to sunlight. The power is stored in six batteries to support the telescope during

  11. Adaptive optics real time processing design for the advanced technology solar telescope

    NASA Astrophysics Data System (ADS)

    Richards, Kit

    2012-07-01

    The four meter Advanced Technology Solar Telescope (ATST) adaptive optics (AO) system will require at least twenty-four times the real time processing power as the Dunn Solar Telescope AO system. An FPGA solution for ATST AO real time processing is being pursued instead of the parallel DSP approach used for the Dunn AO76 system. An analysis shows FPGAs will have lower latency and lower hardware cost than an equivalent DSP solution. Interfacing to the proposed high speed camera and the deformable mirror will be simpler and have lower latency than with DSPs. This paper will discuss the current design and progress toward implementing the FPGA solution.

  12. The soft X-ray telescope for the SOLAR-A mission

    NASA Technical Reports Server (NTRS)

    Tsuneta, S.; Acton, L.; Bruner, M.; Lemen, J.; Brown, W.; Caravalho, R.; Catura, R.; Freeland, S.; Jurcevich, B.; Owens, J.

    1991-01-01

    The Soft X-ray Telescope (SXT) of the SOLAR-A mission is designed to produce X-ray movies of flares with excellent angular and time resolution as well as full-disk X-ray images for general studies. A selection of thin metal filters provide a measure of temperature discrimination and aid in obtaining the wide dynamic range required for solar observing. The co-aligned SXT aspect telescope will yield optical images for aspect reference, white-light flare and sunspot studies, and, possibly, helioseismology. This paper describes the capabilities and characteristics of the SXT for scientific observing.

  13. The Lyman-α Solar Telescope (LST) for the ASO-S mission

    NASA Astrophysics Data System (ADS)

    Li, Hui

    The Lyman-α (Lyα) Solar Telescope (LST) is one of the payloads for the proposed Space-Borne Advanced Solar Observatory (ASO-S). LST consists of a Solar Disk Imager (SDI) with a field-of-view (FOV) of 1.2 R⊙ (R⊙ = solar radius), a Solar Corona Imager (SCI) with an FOV of 1.1 - 2.5 R⊙, and a full-disk White-light Solar Telescope (WST) with the same FOV as the SDI, which also serves as the guiding telescope. The SCI is designed to work in the Lyα (121.6 nm) waveband and white-light (for polarization brightness observation), while the SDI will work in the Lyα waveband only. The WST works in both visible (for guide) and ultraviolet (for science) broadband. The LST will observe the Sun from disk-center up to 2.5 R⊙ for both solar flares and coronal mass ejections with high tempo-spatial resolution

  14. The Lyman-alpha Solar Telescope for the ASO-S

    NASA Astrophysics Data System (ADS)

    Li, Hui

    2015-08-01

    The Lyman-alpha Solar Telescope (LST) is one of the payloads for the proposed Space-Borne Advanced Solar Observatory (ASO-S). LST consists of a Solar Disk Imager (SDI) with a field-of-view (FOV) of 1.2 Rsun, a Solar Corona Imager (SCI) with an FOV of 1.1 - 2.5 Rsun, and a full-disk White-light Solar Telescope (WST) with an FOV of 1.2 Rsun, which also serves as the guiding telescope. The SCI is designed to work at the Lyman-alpha waveband and white-light, while the SDI will work at the Lyman-alpha waveband only. The WST works both in visible (for guide) and ultraviolet (for science) white-light. The LST will observe the Sun from disk-center up to 2.5 solar radii for both solar flares and coronal mass ejections. In this presentation, I will give an introduction to LST, including scientific objectives, science requirement, instrument design and current status.

  15. Cross-Calibrating Sunspot Magnetic Field Strength Measurements from the McMath-Pierce Solar Telescope and the Dunn Solar Telescope

    NASA Astrophysics Data System (ADS)

    Watson, Fraser T.; Beck, Christian; Penn, Matthew J.; Tritschler, Alexandra; Pillet, Valentín Martinez; Livingston, William C.

    2015-11-01

    In this article we describe a recent effort to cross-calibrate data from an infrared detector at the McMath-Pierce Solar Telescope and the Facility InfraRed Spectropolarimeter (FIRS) at the Dunn Solar Telescope. A synoptic observation program at the McMath-Pierce has measured umbral magnetic field strengths since 1998, and this data set has recently been compared with umbral magnetic field observations from SOHO/MDI and SDO/HMI. To further improve on the data from McMath-Pierce, we compared the data with measurements taken at the Dunn Solar Telescope with far greater spectral resolution than has been possible with space instrumentation. To minimise potential disruption to the study, concurrent umbral measurements were made so that the relationship between the two datasets can be most accurately characterised. We find that there is a strong agreement between the umbral magnetic field strengths recorded by each instrument, and we reduced the FIRS data in two different ways to successfully test this correlation further.

  16. The Multi-Spectral Solar Telescope Array. II - Soft X-ray/EUV reflectivity of the multilayer mirrors

    NASA Technical Reports Server (NTRS)

    Barbee, Troy W., Jr.; Weed, J. W.; Hoover, Richard B. C., Jr.; Allen, Max J.; Lindblom, Joakim F.; O'Neal, Ray H.; Kankelborg, Charles C.; Deforest, Craig E.; Paris, Elizabeth S.; Walker, Arthur B. C.

    1992-01-01

    We have developed seven compact soft X-ray/EUV (XUV) multilayer coated and two compact FUV interference film coated Cassegrain and Ritchey-Chretien telescopes for a rocket borne observatory, the Multi-Spectral Solar Telescope Array. We report here on extensive measurements of the efficiency and spectral bandpass of the XUV telescopes carried out at the Stanford Synchrotron Radiation Laboratory.

  17. The Large Millimeter Telescope and Solar Like Stars

    NASA Astrophysics Data System (ADS)

    Chavez, M.; Hughes, D.; LMT Project Team

    2013-04-01

    This paper describes the current status of the Large Millimeter Telescope (LMT), the near-term plans for the telescope and the initial suite of instrumentation. It also briefly describes two astronomical branches in which the LMT will certainly have a major impact: the study of thermal emission of circumstellar material around main sequence stars and the analysis of the molecular contents of this material in relatively young stars. The LMT is a bi-national collaboration between Mexico and the USA, led by the Instituto Nacional de Astrofísica, Optica y Electrónica (INAOE) and the University of Massachusetts at Amherst, to construct, commission and operate a 50m-diameter millimeter-wave radio telescope. Construction of the telescope structure is complete at the 4600 m LMT site on the summit of Volcán Sierra Negra, an extinct volcano in the Mexican state of Puebla. First-light with the LMT was successfully conducted in June and July 2011 with observations at both 3 and 1.1 mm. The commissioning and future scientific operation of the LMT is divided into two major phases. As part of phase I, following the improvement in the alignment of the surface segments within the inner 32 meter diameter of the antenna, the project will begin the first shared risk scientific observations in the spring of 2013. In phase II, we will continue the installation and alignment of the remainder of the reflector surface, after which the final commissioning of the full 50m LMT will take place. The LMT antenna, outfitted with its initial complement of scientific instruments, will be a world-leading scientific research facility for millimeter-wave astronomy.

  18. Ultra-Deep Hubble Space Telescope Imaging of the Small Magellanic Cloud: The Initial Mass Function of Stars with M <~ 1 M

    NASA Astrophysics Data System (ADS)

    Kalirai, Jason S.; Anderson, Jay; Dotter, Aaron; Richer, Harvey B.; Fahlman, Gregory G.; Hansen, Brad M. S.; Hurley, Jarrod; Reid, I. Neill; Rich, R. Michael; Shara, Michael M.

    2013-02-01

    We present a new measurement of the stellar initial mass function (IMF) based on ultra-deep, high-resolution photometry of >5000 stars in the outskirts of the Small Magellanic Cloud (SMC) galaxy. The Hubble Space Telescope (HST) Advanced Camera for Surveys observations reveal this rich, cospatial population behind the foreground globular cluster 47 Tuc, which we targeted for 121 HST orbits. The stellar main sequence of the SMC is measured in the F606W, F814W color-magnitude diagram down to ~30th magnitude, and is cleanly separated from the foreground star cluster population using proper motions. We simulate the SMC population by extracting stellar masses (single and unresolved binaries) from specific IMFs and converting those masses to luminosities in our bandpasses. The corresponding photometry for these simulated stars is drawn directly from a rich cloud of 4 million artificial stars, thereby accounting for the real photometric scatter and completeness of the data. Over a continuous and well-populated mass range of M = 0.37-0.93 M ⊙ (e.g., down to a ~75% completeness limit at F606W = 28.7), we demonstrate that the IMF is well represented by a single power-law form with slope α = -1.90 (+0.15 -0.10) (3σ error) (e.g., dN/dMvprop M α). This is shallower than the Salpeter slope of α = -2.35, which agrees with the observed stellar luminosity function at higher masses. Our results indicate that the IMF does not turn over to a more shallow power-law form within this mass range. We discuss implications of this result for the theory of star formation, the inferred masses of galaxies, and the (lack of a) variation of the IMF with metallicity. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555. These observations are associated with proposal GO-11677.

  19. Automatic detection and extraction of ultra-fine bright structure observed with new vacuum solar telescope

    NASA Astrophysics Data System (ADS)

    Deng, Linhua

    2017-02-01

    Solar magnetic structures exhibit a wealth of different spatial and temporal scales. Presently, solar magnetic element is believed to be the ultra-fine magnetic structure in the lower solar atmospheric layer, and the diffraction limit of the largest-aperture solar telescope (New Vacuum Solar Telescope; NVST) of China is close to the spatial scale of magnetic element. This implies that modern solar observations have entered the era of high resolution better than 0.2 arc-second. Since the year of 2011, the NVST have successfully established and obtained huge observational data. Moreover, the ultra-fine magnetic structure rooted in the dark inter-graunlar lanes can be easily resolved. Studies on the observational characteristics and physical mechanism of magnetic bright points is one of the most important aspects in the field of solar physics, so it is very important to determine the statistical and physical parameters of magnetic bright points with the feature extraction techniques and numerical analysis approaches. For identifying such ultra-fine magnetic structure, an automatically and effectively detection algorithm, employed the Laplacian transform and the morphological dilation technique, is proposed and examined. Then, the statistical parameters such as the typical diameter, the area distribution, the eccentricity, and the intensity contrast are obtained. And finally, the scientific meaning for investigating the physical parameters of magnetic bright points are discussed, especially for understanding the physical processes of solar magnetic energy transferred from the photosphere to the corona.

  20. Seeing the Deep Sky: Telescopic Astronomy Projects Beyond the Solar System

    NASA Astrophysics Data System (ADS)

    Schaaf, Fred

    1992-03-01

    Packed with a vast array of telescopic projects involving different kind of stars, star clusters, nebulae and galaxies which lie beyond our solar system. Takes a look at stars of diverse chemical or atomic ``brew'', old and new, tiny or vast, dense or tenuous; the ways in which they behave and much more.

  1. Polarization modeling for the main optics of Chinese Giant Solar Telescope

    NASA Astrophysics Data System (ADS)

    Yuan, Shu; Fu, Yu; Jin, Zhenyu

    2016-07-01

    Chinese Giant Solar Telescope, which has a 8m diameter segmented primary mirror, is a plan for the next generation ground-based large solar telescope in China. A major scientific requirement for this telescope is the high accuracy polarimetry. In this paper, the instrumental polarization of the main optics is analyzed by polarization modeling, which is caused by off-axial field of view, spider asymmetry, nonuniform segment gap and segment coating. The result shows that the net polarization is sensitive to the asymmetrical spider leg widening and the uniformity of the segment optical property. For meeting the accuracy requirement, the extinction ratio and retardence error for each segment should be less than 0.3% and 0.8 degree, respectively. Generally, the ring segmented primary mirror have advantage in controlling the instrumental polarization for large main optics.

  2. Summary of studies for a solar optical telescope in space: 1968-1976

    NASA Technical Reports Server (NTRS)

    Bremer, J.; Kaul, R.

    1976-01-01

    The primary objective of this review is to tabulate the basic recommendations of several solar telescope studies. A primary matrix, listing some of the basic optical parameters, was compiled and forms the basis for a table. From this table it is apparent that a strong consensus exists on the configuration of the telescope and on its fundamental dimensionless parameters. Other tables presented in this document address the basic approach of each study to the telescope design as well as to the design of critical subsystems. These subsystem problems include the material, coating, configuration, mounting, launch locks, and thermal control of the primary mirror, the structure of the main telescope and the instrument bay, the mechanisms for radiation rejection, thermal control, and meteoroid shielding, and methods of maintaining image quality by proper alignment and by image motion compensation.

  3. Solar observations with a low frequency radio telescope

    NASA Astrophysics Data System (ADS)

    Myserlis, I.; Seiradakis, J.; Dogramatzidis, M.

    2012-01-01

    We have set up a low frequency radio monitoring station for solar bursts at the Observatory of the Aristotle University in Thessaloniki. The station consists of a dual dipole phased array, a radio receiver and a dedicated computer with the necessary software installed. The constructed radio receiver is based on NASA's Radio Jove project. It operates continuously, since July 2010, at 20.1 MHz (close to the long-wavelength ionospheric cut-off of the radio window) with a narrow bandwidth (~5 kHz). The system is properly calibrated, so that the recorded data are expressed in antenna temperature. Despite the high interference level of an urban region like Thessaloniki (strong broadcasting shortwave radio stations, periodic experimental signals, CBs, etc), we have detected several low frequency solar radio bursts and correlated them with solar flares, X-ray events and other low frequency solar observations. The received signal is monitored in ordinary ASCII format and as audio signal, in order to investigate and exclude man-made radio interference. In order to exclude narrow band interference and calculate the spectral indices of the observed events, a second monitoring station, working at 36 MHz, is under construction at the village of Nikiforos near the town of Drama, about 130 km away of Thessaloniki. Finally, we plan to construct a third monitoring station at 58 MHz, in Thessaloniki. This frequency was revealed to be relatively free of interference, after a thorough investigation of the region.

  4. Active thermal control for the 1.8-m primary mirror of the solar telescope CLST

    NASA Astrophysics Data System (ADS)

    Liu, Yangyi; Gu, Naiting; Li, Cheng; Cheng, Yuntao; Yao, Benxi; Wang, Zhiyong; Rao, Changhui

    2016-07-01

    The 1.8-m primary mirror of solar telescope is heated by the solar radiation and introduce harmful mirror seeing degrading the imaging quality. For the Chinese Large Solar Telescope (CLST), the thermal requirement based on the quantitative evaluation on mirror seeing effect shows that the temperature rise on mirror surface should be within 1 kelvin. To meet the requirement, an active thermal control system design for the CLST primary mirror is proposed, and realized on the subscale prototype of the CLST. The experimental results show that the temperature on the mirror surface is well controlled. The average and maximum thermal controlled error are less than 0.3 and 0.7 kelvins respectively, which completely meets the requirements.

  5. EIT: Solar corona synoptic observations from SOHO with an Extreme-ultraviolet Imaging Telescope

    NASA Technical Reports Server (NTRS)

    Delaboudiniere, J. P.; Gabriel, A. H.; Artzner, G. E.; Michels, D. J.; Dere, K. P.; Howard, R. A.; Catura, R.; Stern, R.; Lemen, J.; Neupert, W.

    1988-01-01

    The Extreme-ultraviolet Imaging Telescope (EIT) of SOHO (solar and heliospheric observatory) will provide full disk images in emission lines formed at temperatures that map solar structures ranging from the chromospheric network to the hot magnetically confined plasma in the corona. Images in four narrow bandpasses will be obtained using normal incidence multilayered optics deposited on quadrants of a Ritchey-Chretien telescope. The EIT is capable of providing a uniform one arc second resolution over its entire 50 by 50 arc min field of view. Data from the EIT will be extremely valuable for identifying and interpreting the spatial and temperature fine structures of the solar atmosphere. Temporal analysis will provide information on the stability of these structures and identify dynamical processes. EIT images, issued daily, will provide the global corona context for aid in unifying the investigations and in forming the observing plans for SOHO coronal instruments.

  6. ULTRA-DEEP HUBBLE SPACE TELESCOPE IMAGING OF THE SMALL MAGELLANIC CLOUD: THE INITIAL MASS FUNCTION OF STARS WITH M {approx}< 1 M {sub Sun}

    SciTech Connect

    Kalirai, Jason S.; Anderson, Jay; Dotter, Aaron; Reid, I. Neill; Richer, Harvey B.; Fahlman, Gregory G.; Hansen, Brad M. S.; Rich, R. Michael; Hurley, Jarrod; Shara, Michael M. E-mail: jayander@stsci.edu E-mail: richer@astro.ubc.ca E-mail: hansen@astro.ucla.edu E-mail: jhurley@swin.edu.au

    2013-02-15

    We present a new measurement of the stellar initial mass function (IMF) based on ultra-deep, high-resolution photometry of >5000 stars in the outskirts of the Small Magellanic Cloud (SMC) galaxy. The Hubble Space Telescope (HST) Advanced Camera for Surveys observations reveal this rich, cospatial population behind the foreground globular cluster 47 Tuc, which we targeted for 121 HST orbits. The stellar main sequence of the SMC is measured in the F606W, F814W color-magnitude diagram down to {approx}30th magnitude, and is cleanly separated from the foreground star cluster population using proper motions. We simulate the SMC population by extracting stellar masses (single and unresolved binaries) from specific IMFs and converting those masses to luminosities in our bandpasses. The corresponding photometry for these simulated stars is drawn directly from a rich cloud of 4 million artificial stars, thereby accounting for the real photometric scatter and completeness of the data. Over a continuous and well-populated mass range of M = 0.37-0.93 M {sub Sun} (e.g., down to a {approx}75% completeness limit at F606W = 28.7), we demonstrate that the IMF is well represented by a single power-law form with slope {alpha} = -1.90 ({sup +0.15} {sub -0.10}) (3{sigma} error) (e.g., dN/dM{proportional_to} M {sup {alpha}}). This is shallower than the Salpeter slope of {alpha} = -2.35, which agrees with the observed stellar luminosity function at higher masses. Our results indicate that the IMF does not turn over to a more shallow power-law form within this mass range. We discuss implications of this result for the theory of star formation, the inferred masses of galaxies, and the (lack of a) variation of the IMF with metallicity.

  7. Solar EUV, XUV and soft X-ray telescope facilities

    NASA Technical Reports Server (NTRS)

    Withbroe, G. L.

    1982-01-01

    Facility class, high resolution instrumentation can enable maximum spatial, spectral and temporal resolutions and provide understanding of the complex physical conditions in the outer solar atmosphere and the mechanisms responsible for these conditions. The scientific rationale for facility class instruments operating in the EUV, XUV, and soft X ray spectral ranges are discussed. Possible configurations for these facilities and priorities for their development are considered.

  8. The x-ray/EUV telescope for the Solar-C mission: science and development activities

    NASA Astrophysics Data System (ADS)

    Sakao, Taro; Narukage, Noriyuki; Imada, Shinsuke; Suematsu, Yoshinori; Shimojo, Masumi; Tsuneta, Saku; DeLuca, Edward E.; Watanabe, Kyoko; Ishikawa, Shin-nosuke

    2012-09-01

    We report science and development activities of the X-ray/EUV telescope for the Japanese Solar-C mission whose projected launch around 2019. The telescope consists of a package of (a) a normal-incidence (NI) EUV telescope and (b) a grazing-incidence (GI) soft X-ray telescope. The NI telescope chiefly provides images of low corona (whose temperature 1 MK or even lower) with ultra-high angular resolution (0.2-0.3"/pixel) in 3 wavelength bands (304, 171, and 94 angstroms). On the other hand, the GI telescope provides images of the corona with a wide temperature coverage (1 MK to beyond 10 MK) with the highest-ever angular resolution (~0.5"/pixel) as a soft X-ray coronal imager. The set of NI and GI telescopes should provide crucial information for establishing magnetic and gas-dynamic connection between the corona and the lower atmosphere of the Sun which is essential for understanding heating of, and plasma activities in, the corona. Moreover, we attempt to implement photon-counting capability for the GI telescope with which imaging-spectroscopy of the X-ray corona will be performed for the first time, in the energy range from ~0.5 keV up to 10 keV. The imaging-spectroscopic observations will provide totally-new information on mechanism(s) for the generation of hot coronal plasmas (heated beyond a few MK), those for magnetic reconnection, and even generation of supra-thermal electrons associated with flares. An overview of instrument outline and science for the X-ray photoncounting telescope are presented, together with ongoing development activities in Japan towards soft X-ray photoncounting observations, focusing on high-speed X-ray CMOS detector and sub-arcsecond-resolution GI mirror.

  9. Quantitative evaluation on internal seeing induced by heat-stop of solar telescope.

    PubMed

    Liu, Yangyi; Gu, Naiting; Rao, Changhui

    2015-07-27

    heat-stop is one of the essential thermal control devices of solar telescope. The internal seeing induced by its temperature rise will degrade the imaging quality significantly. For quantitative evaluation on internal seeing, an integrated analysis method based on computational fluid dynamics and geometric optics is proposed in this paper. Firstly, the temperature field of the heat-affected zone induced by heat-stop temperature rise is obtained by the method of computational fluid dynamics calculation. Secondly, the temperature field is transformed to refractive index field by corresponding equations. Thirdly, the wavefront aberration induced by internal seeing is calculated by geometric optics based on optical integration in the refractive index field. This integrated method is applied in the heat-stop of the Chinese Large Solar Telescope to quantitatively evaluate its internal seeing. The analytical results show that the maximum acceptable temperature rise of heat-stop is up to 5 Kelvins above the ambient air at any telescope pointing directions under the condition that the root-mean-square of wavefront aberration induced by internal seeing is less than 25nm. Furthermore, it is found that the magnitude of wavefront aberration gradually increases with the increase of heat-stop temperature rise for a certain telescope pointing direction. Meanwhile, with the variation of telescope pointing varying from the horizontal to the vertical direction, the magnitude of wavefront aberration decreases at first and then increases for the same heat-stop temperature rise.

  10. Implementation of 1-bit Image Correlator on the Space Solar Telescope

    NASA Astrophysics Data System (ADS)

    Jiang, Zhao; Jin, Sheng-Zhen; Jiang, Ai-Min

    2007-06-01

    2-D image correlation tracking is a key factor for the Main Optical Telescope on the Space Solar Telescope to reach its 0.1" spatial resolution. In order to realize fast image correlation, 1-bit correlation arithmetic is proposed, and the hardware design of 1-bit correlator based on DSP and FPGA is given. Only 0.33 ms is needed to realize a 32 × 32 image correlation algorithm on XCV800 FPGA chip with 20 MHz clock. The FPGA resource consumption is only 1/9 that of FFT - based (12-bit data) correlator.

  11. Structural mechanics of the solar-A Soft X-ray Telescope

    NASA Technical Reports Server (NTRS)

    Jurcevich, B. K.; Bruner, M. E.; Gowen, K. F.

    1992-01-01

    The Soft X-ray Telescope (SXT) is one of four major instruments that constitute the payload of the NASA-Japanese mission YOHKOH (formerly known as Solar-A), scheduled to be launched in August, 1991. This paper describes the design of the SXT, the key system requirements, and the SXT optical and structural systems. Particular attention is given to the design considerations for stiffness and dimensional stability, temperature compensation, and moisture sensitivyty control. Consideration is also given to the X-ray mirror, the aspect telescope, the entrance filters, the mechanical structure design, the aft support plate and mount, the SXT finite element model, and other subsystems.

  12. The Soft X-ray Telescope for Solar-A - Design evolution and lessons learned

    NASA Technical Reports Server (NTRS)

    Bruner, Marilyn E.

    1992-01-01

    The Japanese Solar-A satellite mission's Soft X-ray Telescope uses grazing-incidence optics, a CCD detector, and a pair of filter wheels for wavelength selection. A coaxially-mounted visible-light lens furnished sunspot and magnetic plage images, together with aspect information which aids in aligning the soft X-ray images with those from the satellite's Hard X-ray Telescope. Instrument electronics are microprocessor-based, and imbedded in a tightly integrated distributed system. Control software is divided between the instrument microprocessor and the spacecraft control computer.

  13. A silicon surface barrier telescope for solar particles identification

    NASA Technical Reports Server (NTRS)

    Sequeiros, J.; Medina, J.

    1985-01-01

    From the results three conclusions can be made: (1) the detector system described and tested is capable of good charge resolution from He to Al although beyond Ne the statistic is very poor; (2) in the high gain mode, isotopic resolution has been achieved for Li-6/Li-7 Be-7/Be-9; (3) the much higher yield of He over He and of Be-9 over Be-10 in these types of nuclear reactions prevents obtaining experimental evidence of those isotopes, although it is believed that, at least He-3/He-4 can be resolved under other more favorable conditions (i.e., solar He-3-rich events).

  14. Thermal effects in the Solar Disk Sextant telescope

    NASA Astrophysics Data System (ADS)

    Spagnesi, Chiara; Vannoni, Maurizio; Molesini, Giuseppe; Righini, Alberto

    2004-02-01

    The Solar Disk Sextant (SDS) is an instrument conceived to monitor the diameter of the Sun and its oscillations. A key component of the SDS is the Beam Splitting Wedge (BSW), whose function is to provide calibration to the geometry of the focal plane. The thermal behavior of the BSW is critical, as it affects the overall performance of the instrument. Modeling the elements of the BSW and the basic thermal processes is shown to account for experimental evidences of defocusing observed in early measurements with a balloon borne prototype. Basic requirements for accurate thermal stabilization on board of the final instrument are derived.

  15. Determination of orientation of space vehicle Sich-1M from the date of ferroprobe magnetometers and Solar detector

    NASA Astrophysics Data System (ADS)

    Kozak, L.; Suhorukov, A.

    On 24 December 2004 a launch of the satellite Sich-1M was made Unfortunately instead of the planned orbit with the altitude of near 670 km the satellite went up to the elliptical orbit with the altitude 280 km In addition the satellite got some swing The motion of the satellite in such dense atmosphere layers decreases its lifetime down to one year At the end of December the gravitational beam was pulled out from the satellite which partly stabilized its motion Oscillations of the satellite set inessential limitations on realization of scientific tasks of the project Variant because there is a possibility to determine the satellite orientation for a given time moment with the help of measurements of ferroprobe magnetometer FZM or onboard magnetometer The device FZM measures three components of magnetic field Bx By Bz of the Earth in coordinate system of the satellite To determine the satellite orientation we have used the fact that each of the component of the magnetic field at the present time moment is a function of geographical coordinates of the satellite latitude longitude height over sea level its orientation and components of a vector of Earth magnetic field in this point calculated from magnetosphere model Thus having direct satellite measurements of Bx By Bz at given time moment in given point orbital elements and position of the satellite on the orbit and using the standard model of Earth s magnetosphere one can calculate the satellite orientation as function of time For the calculation we have used the magnetosphere model The

  16. Elemental abundance analyses with the EBASIM spectrograph of the 2.1-m CASLEO Observatory Telescope. I. The late B and early A stars vec xi Octantis, alpha Sextantis, and 68 Tauri

    NASA Astrophysics Data System (ADS)

    Pintado, O. I.; Adelman, S. J.

    2003-08-01

    We used data from the EBASIM spectrograph of the 2.1-m CASLEO telescope to study three rather sharp-lined late B to early A stars xi Oct (B6 IV), alpha Sex (B9.5 III), and 68 Tau (A2 IV). These measurements are compared with those from the Anglo-Austrialian Telescope for the first star and to those from the coudé spectrograph of the 1.22-m telescope of the Dominion Astrophysical Observatory (DAO) for the other two stars. The equivalent width scales of the EBASIM and the DAO data are similar. Thus for the latter two stars the DAO data is also used in the analyses. Both xi Oct and alpha Sex generally have abundances close to those of the Sun in the range of values found for other normal stars with similar effective temperatures. The abundance pattern for 68 Tau is that of a metallic-lined star as is well known. Tables 5 to 7 are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/406/987

  17. Detection of Solar Wind Disturbances: Mexican Array Radio Telescope IPS Observations at 140 MHz

    NASA Astrophysics Data System (ADS)

    Romero-Hernandez, E.; Gonzalez-Esparza, J. A.; Aguilar-Rodriguez, E.; Ontiveros-Hernandez, V.; Villanueva-Hernandez, P.

    2015-09-01

    The interplanetary scintillation (IPS) technique is a remote-sensing method for monitoring solar-wind perturbations. The Mexican Array Radio Telescope (MEXART) is a single-station instrument operating at 140 MHz, fully dedicated to performing solar-wind studies employing the IPS technique. We report MEXART solar-wind measurements (scintillation indices and solar-wind velocities) using data obtained during the 2013 and 2014 campaigns. These solar-wind measurements were calculated employing a new methodology based on the wavelet transform (WT) function. We report the variation of the scintillation indices versus the heliocentric distance for two IPS sources (3C48 and 3C147). We found different average conditions of the solar-wind density fluctuations in 2013 and 2014. We used the fittings of the radial dependence of the scintillation index to calculate g-indices. Based on the g-index value, we identified 17 events that could be associated with strong compression regions in the solar wind. We present the first ICME identifications in our data. We associated 14 IPS events with preceding CME counterparts by employing white-light observations from the Large Angle and Spectrometric Coronagraph (LASCO) onboard the Solar and Heliospheric Observatory (SOHO) spacecraft. We found that most of the IPS events, detected during the solar maximum of Cycle 24 were associated with complex CME events. For the IPS events associated with single CME counterparts, we found a deceleration tendency of the CMEs as they propagate in the interplanetary medium. These results show that the instrument detects solar-wind disturbances, and the WT methodology provides solar-wind information with good accuracy. The MEXART observations will complement solar-wind IPS studies using other frequencies, and the tracking of solar-wind disturbances by other stations located at different longitudes.

  18. Fermi Large Area Telescope observations of high-energy gamma-ray emission from Solar flares

    NASA Astrophysics Data System (ADS)

    Pesce Rollins, Melissa

    2017-01-01

    The Fermi Large Area Telescope (LAT) observations of the active Sun provide the largest sample of detected solar flares with emission greater than 30 MeV to date. These include detections of impulsive and sustained emission, extending up to 20 hours in the case of the 2012 March 7 X-class flares. These high-energy flares are coincident with GOES X-ray flares of X, M and C classes as well as very fast Coronal Mass Ejections (CME). We will present results from the First Fermi-LAT solar flare catalog covering the majority of Solar Cycle 24 including correlation studies with the associated Solar Energetic Particles (SEP) and CMEs.

  19. Solar-Array-Induced Disturbance of the Hubble Space Telescope Pointing System

    NASA Technical Reports Server (NTRS)

    Foster, Carlton L.; Tinker, Michael L.; Nurre, Gerald S.; Till, William A.

    1995-01-01

    The investigation of the vibrational disturbances of the Hubble Space Telescope that were discovered soon after deployment in orbit is described in detail. It was found that the disturbances were particularly evident during orbital day-night crossings, and that the magnitude of the disturbances was considerably larger than the design jitter requirement. This paper describes the process by which the vibrations were characterized and isolated to a particular mechanism. The analysis of the flight data and comparisons with computer simulation results showed that the source of the disturbances was the thermally driven deformation of the solar arrays in conjunction with frictional effects in the array mechanisms. The control system was successfully modified to attenuate the disturbances to tolerable levels pending mechanical and thermal redesign of the solar arrays. The new arrays were installed during the first Space Telescope servicing mission, and in combination with the enhanced control system algorithm reduced the disturbances to satisfactory levels.

  20. The solar array-induced disturbance of the Hubble Space Telescope pointing system

    NASA Technical Reports Server (NTRS)

    Foster, C. L.; Tinker, M. L.; Nurre, G. S.; Till, W. A.

    1995-01-01

    The investigation of the vibrational disturbances of the Hubble Space Telescope that were discovered soon after deployment in orbit is described in detail. It was found that the disturbances were particularly evident during orbital day-night crossings, and that the magnitudes of the disturbances were considerably larger than the design jitter requirements. This paper describes the process by which the vibrations were characterized and isolated to a particular mechanism. The analysis of the flight data and comparisons with computer simulation results showed that the source of the disturbances was the thermally driven deformation of the solar arrays in conjunction with frictional effects in the array mechanisms. The control system was successfully modified to attenuate the disturbances to tolerable levels pending mechanical and thermal redesign of the solar arrays. The new arrays were installed during the first space telescope servicing mission and, in combination with the enhanced control system algorithm, reduced the disturbances to satisfactory levels.

  1. Solar System Studies in the Infrared with the Spitzer Space Telescope

    NASA Technical Reports Server (NTRS)

    Cruikshank, D. P.; Stansberry, J. A.; Cleve, J. Van; Burgdorf, M. J.; Fernandez, Y. R.; Meadows, V. S.; Reach, W. T.

    2004-01-01

    The Spitzer Space Telescope, formerly known as SIRTF, is a cryogenic telescope (85 cm diameter) operating in a heliocentric orbit trailing the Earth. Its three instruments provide capabilities for spectroscopy, wide-field and small-field imaging at many wavelengths in the range 3.5-160 microns. Observations to be executed in the first two years in programs defined by the Guaranteed Time Observer (GTO) group (the authors of this presentation) consist of photometry, spectroscopy, and radiometry of many Solar System objects, including Titan and other satellites of the outer planets, Pluto, Centaurs, trans-Neptunian objects, comers, asteroids, Uranus, and Neptune. At the time of the preparation of this abstract, some preliminary observations have been made, but the final calibration and reduction of the data are still in progress. The latest results of the Solar System investigations will be presented here.

  2. Thermal/Dynamic Characterization Test of the Solar Array Panel for Hubble Space Telescope

    NASA Technical Reports Server (NTRS)

    Jenkins, Kathleen; Hershfeld, Donald J.

    1999-01-01

    The Hubble Space Telescope has experienced a problem maintaining pointing accuracy during emergence of the spacecraft from the Earth's shadow. The problem has been attributed to the rapid thermal gradient that develops when the heat from the Sun strikes the cold solar arrays. The thermal gradient causes the solar arrays to deflect or bend and this motion is sufficient to disturb the pointing control system. In order to alleviate this problem, a new design for the solar arrays has been fabricated. These new solar arrays will replace the current solar arrays during a future Hubble servicing mission. The new solar arrays have been designed so that the effective net motion of the center of mass of each panel is essentially zero. Although the solar array thermal deflection problem has been studied extensively over a period of years, a full scale test of the actual flight panels was required in order to establish confidence in the analyses. This test was conducted in the JPL Solar Simulation Facility in April, 1999. This presentation will discuss the objectives and methods of the test and present some typical test data.

  3. The Multi-Spectral Solar Telescope Array - Initial results and future plans

    NASA Technical Reports Server (NTRS)

    Walker, Arthur B. C., Jr.; Hoover, Richard B.; Barbee, Troy W., Jr.

    1993-01-01

    We review the scientific objectives, configuration, and initial flight results of the Multi-Spectral Solar Telescope Array (MSSTA). The MSSTA is a comprehensive solar rocket-borne observatory which utilizes multilayer coated optics to achieve high resolution thermally resolved images of the sun at FUV, EUV and soft X-ray wavelengths. The MSSTA was successfully flown on May 13, 1991, obtaining high resolution images of chromospheric and coronal structures, including loops, filaments, polar plumes, and coronal holes. We also discuss plans to expand the capabilities of the MSSTA for future flights.

  4. Features of the solar array drive mechanism for the space telescope

    NASA Technical Reports Server (NTRS)

    Hostenkamp, R. G.

    1985-01-01

    The solar array drive mechanism for the Space Telescope embodies several features not customarily found on solar array drives. Power and signal transfer is achieved by means of a flexible wire harness for which the chosen solution, consisting of 168 standard wires, is described. The torque performance data of the harness over its temperature range are presented. The off load system which protects the bearings from the launch loads is released by a trigger made from Nitinol, the memory alloy. The benefits of memory alloy and the caveats for the design are briefly discussed. The design of the off load system is described and test experience is reported.

  5. A CCD image transducer and processor suitable for space flight. [satellite borne solar telescope instrumentation

    NASA Technical Reports Server (NTRS)

    Michels, D. J.

    1975-01-01

    A satellite borne extreme ultraviolet solar telescope makes use of CCD area arrays for both image readout and onboard data processing. The instrument is designed to view the inner solar corona in the wavelength band 170 - 630 A, and the output video stream may be selected by ground command to present the coronal scene, or the time-rate-of-change of the scene. Details of the CCD application to onboard image processing are described, and a discussion of the processor's potential for telemetry bandwidth compression is included. Optical coupling methods, data storage requirements, spatial and temporal resolution, and nonsymmetry of resolution (pitch) in the CCD are discussed.

  6. X-ray photographs of a solar active region with a multilayer telescope at normal incidence

    NASA Technical Reports Server (NTRS)

    Underwood, J. H.; Bruner, M. E.; Haisch, B. M.; Brown, W. A.; Acton, L. W.

    1987-01-01

    An astronomical photograph was obtained with a multilayer X-ray telescope. A 4-cm tungsten-carbon multilayer mirror was flown as part of an experimental solar rocket payload, and successful images were taken of the sun at normal incidence at a wavelength of 44 A. Coronal Si XII emission from an active region was recorded on film; as expected, the structure is very similar to that observed at O VIII wavelengths by the Solar Maximum Mission flat-crystal spectrometer at the same time. The small, simple optical system used in this experiment appears to have achieved a resolution of 5 to 10 arcsec.

  7. Multi-Spectral Solar Telescope Array. IV - The soft X-ray and extreme ultraviolet filters

    NASA Technical Reports Server (NTRS)

    Lindblom, Joakim F.; O'Neal, Ray H.; Walker, Arthur B. C., Jr.; Powell, Forbes R.; Barbee, Troy W., Jr.; Hoover, Richard B.

    1991-01-01

    NASA's Multi-Spectral Solar Telescope Array uses various combinations of thin foil filters composed of Al, C, Te, Be, Mo, Rh, and phthalocyanine to achieve the requisite radiation-rejection characteristics. Such rejection is demanded by the presence of strong EUV radiation at longer wavelengths where the specular reflectivity of multilayer mirrors can cause 'contamination' of the image in the narrow band defined by the Bragg condition.

  8. STS-31 Hubble Space Telescope (HST) solar array panel deploy aboard OV-103

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Held in appendage deploy position by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS), the Hubble Space Telescope's (HST's) starboard solar array (SA) bistem cassette is released from its stowed position on the Support System Module (SSM) forward shell. The spreader bar and bistem begin to unfurl the SA wing. View was taken by an STS-31 crewmember through an overhead window and is backdropped against the surface of the Earth.

  9. MuSICa image slicer prototype at 1.5-m GREGOR solar telescope

    NASA Astrophysics Data System (ADS)

    Calcines, A.; López, R. L.; Collados, M.; Vega Reyes, N.

    2014-07-01

    Integral Field Spectroscopy is an innovative technique that is being implemented in the state-of-the-art instruments of the largest night-time telescopes, however, it is still a novelty for solar instrumentation. A new concept of image slicer, called MuSICa (Multi-Slit Image slicer based on collimator-Camera), has been designed for the integral field spectrograph of the 4-m European Solar Telescope. This communication presents an image slicer prototype of MuSICa for GRIS, the spectrograph of the 1.5-m GREGOR solar telescope located at the Observatory of El Teide. MuSICa at GRIS reorganizes a 2-D field of view of 24.5 arcsec into a slit of 0.367 arcsec width by 66.76 arcsec length distributed horizontally. It will operate together with the TIP-II polarimeter to offer high resolution integral field spectropolarimetry. It will also have a bidimensional field of view scanning system to cover a field of view up to 1 by 1 arcmin.

  10. Solar Sail - Fresnel Zone Plate Lens for a Large Space Based Telescope

    SciTech Connect

    Early, J T

    2002-02-13

    A Fresnel zone plate lens made with solar sail material could be used as the primary optic for a very large aperture telescope on deep space probes propelled by solar sails. The large aperture telescope capability could enable significant science on fly-by missions to the asteroids, Pluto, Kuiper belt or the tort cloud and could also enable meaningful interstellar fly-by missions for laser propelled sails. This type of lens may also have some potential for laser communications and as a solar concentrator. The techniques for fabrication of meter size and larger Fresnel phase plate optics are under development at LLNL, and we are extending this technology to amplitude zone plates made from sail materials. Corrector optics to greatly extend the bandwidth of these Fresnel optics will be demonstrated in the future. This novel telescope concept will require new understanding of the fabrication, deployment and control of gossamer space structures. It will also require new materials technology for fabricating these optics and understanding their long term stability in a space environment.

  11. Imaging Spectropolarimeter for the Multi-Application Solar Telescope at Udaipur Solar Observatory: Characterization of Polarimeter and Preliminary Observations

    NASA Astrophysics Data System (ADS)

    Tiwary, Alok Ranjan; Mathew, Shibu K.; Bayanna, A. Raja; Venkatakrishnan, P.; Yadav, Rahul

    2017-04-01

    The Multi-Application Solar Telescope (MAST) is a 50 cm off-axis Gregorian telescope that has recently become operational at the Udaipur Solar Observatory (USO). An imaging spectropolarimeter is being developed as one of the back-end instruments of MAST to gain a better understanding of the evolution and dynamics of solar magnetic and velocity fields. This system consists of a narrow-band filter and a polarimeter. The polarimeter includes a linear polarizer and two sets of liquid crystal variable retarders (LCVRs). The instrument is intended for simultaneous observations in the spectral lines 6173 Å and 8542 Å, which are formed in the photosphere and chromosphere, respectively. In this article, we present results from the characterization of the LCVRs for the spectral lines of interest and the response matrix of the polarimeter. We also present preliminary observations of an active region obtained using the spectropolarimeter. For verification purposes, we compare the Stokes observations of the active region obtained from the Helioseismic Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO) with that of MAST observations in the spectral line 6173 Å. We find good agreement between the two observations, considering the fact that MAST observations are limited by seeing.

  12. Multi-Spectral Solar Telescope Array. II - Soft X-ray/EUV reflectivity of the multilayer mirrors

    NASA Technical Reports Server (NTRS)

    Barbee, Troy W., Jr.; Weed, J. W.; Hoover, Richard B.; Allen, Maxwell J.; Lindblom, Joakim F.; O'Neal, Ray H.; Kankelborg, Charles C.; Deforest, Craig E.; Paris, Elizabeth S.; Walker, Arthur B. C., Jr.

    1991-01-01

    The Multispectral Solar Telescope Array is a rocket-borne observatory which encompasses seven compact soft X-ray/EUV, multilayer-coated, and two compact far-UV, interference film-coated, Cassegrain and Ritchey-Chretien telescopes. Extensive measurements are presented on the efficiency and spectral bandpass of the X-ray/EUV telescopes. Attention is given to systematic errors and measurement errors.

  13. Daniel K. Inouye Solar Telescope: High-resolution observing of the dynamic Sun

    NASA Astrophysics Data System (ADS)

    Tritschler, A.; Rimmele, T. R.; Berukoff, S.; Casini, R.; Kuhn, J. R.; Lin, H.; Rast, M. P.; McMullin, J. P.; Schmidt, W.; Wöger, F.; DKIST Team

    2016-11-01

    The 4-m aperture Daniel K. Inouye Solar Telescope (DKIST) formerly known as the Advanced Technology Solar Telescope (ATST) is currently under construction on Haleakalā (Maui, Hawai'i) projected to start operations in 2019. At the time of completion, DKIST will be the largest ground-based solar telescope providing unprecedented resolution and photon collecting power. The DKIST will be equipped with a set of first-light facility-class instruments offering unique imaging, spectroscopic and spectropolarimetric observing opportunities covering the visible to infrared wavelength range. This first-light instrumentation suite will include: a Visible Broadband Imager (VBI) for high-spatial and -temporal resolution imaging of the solar atmosphere; a Visible Spectro-Polarimeter (ViSP) for sensitive and accurate multi-line spectropolarimetry; a Fabry-Pérot based Visible Tunable Filter (VTF) for high-spatial resolution spectropolarimetry; a fiber-fed Diffraction-Limited Near Infra-Red Spectro-Polarimeter (DL-NIRSP) for two-dimensional high-spatial resolution spectropolarimetry (simultaneous spatial and spectral information); and a Cryogenic Near Infra-Red Spectro-Polarimeter (Cryo-NIRSP) for coronal magnetic field measurements and on-disk observations of, e.g., the CO lines at 4.7 μm. We will provide an overview of the DKIST's unique capabilities with strong focus on the first-light instrumentation suite, highlight some of the additional properties supporting observations of transient and dynamic solar phenomena, and touch on some operational strategies and the DKIST critical science plan.

  14. The Advanced Technology Solar Telescope: Science Goals, Design and Project Status. (Invited)

    NASA Astrophysics Data System (ADS)

    Rimmele, T.; Keil, S. L.; Wagner, J.

    2009-12-01

    The 4m Advance Technology Solar Telescope (ATST) on Haleakala will be the most powerful solar telescope and the world’s leading resource for studying solar magnetism that controls the solar wind, flares, coronal mass ejections and variability in the Sun’s output. The project is about to enter the construction phase and is expected to be fully commissioned in 2017. A brief overview of the science goals and observational requirements of the ATST will be given followed by a summary of the design status of the telescope and its instrumentation will during which the technical and engineering challenges the ATST project faces will be discussed. ATST will provide high resolution and high sensitivity observations of the dynamic solar magnetic fields throughout the solar atmosphere, including the corona. With its 4 m aperture, ATST will resolve features at 0.”03 (20km on the sun) at visible wavelengths. The science requirement for polarimetric sensitivity (10-5 relative to intensity) and accuracy (5x10-4 relative to intensity) place strong constraints on the polarization analysis and calibration units. A high order adaptive optics system delivers a corrected beam to the initial set of state-of-the-art, facility class instrumentation located in the Coude lab facility. A few examples of the many unique science capabilities of the 4m ATST will be discussed. The initial set of first generation instruments includes: 1: the Visible Broadband Imager will provide images at the highest possible spatial and temporal resolution at a number of specified wavelengths in the range from 390 nm to 860 nm. 2: the Visible Spectro-Polarimeter will provide precision vector field measurements simultaneously at diverse wavelengths in the visible spectrum and thus deliver quantitative diagnostics of the magnetic field vector as a function of height in the solar atmosphere, along with the associated variation of the thermodynamic properties. 3: the Diffraction-Limited Near-Infrared Spectro

  15. The Greenwich Photo-heliographic Results (1874 - 1885): Observing Telescopes, Photographic Processes, and Solar Images

    NASA Astrophysics Data System (ADS)

    Willis, D. M.; Wild, M. N.; Appleby, G. M.; Macdonald, L. T.

    2016-11-01

    Potential sources of inhomogeneity in the sunspot measurements published by the Royal Observatory, Greenwich, during the early interval 1874 - 1885 are examined critically. Particular attention is paid to inhomogeneities that might arise because the sunspot measurements were derived from solar photographs taken at various contributing solar observatories, which used different telescopes, experienced different seeing conditions, and employed different photographic processes. The procedures employed in the Solar Department at the Royal Greenwich Observatory (RGO), Herstmonceux, during the final phase of sunspot observations provide a modern benchmark for interpreting the early sunspot measurements. The different observing telescopes used at the contributing solar observatories during the interval 1874 - 1885 are discussed in detail, using information gleaned from the official RGO publications and other relevant historical documents. Likewise, the different photographic processes employed at the different solar observatories are reviewed carefully. The procedures used by RGO staff to measure the positions and areas of sunspot groups on photographs of the Sun having a nominal radius of either four or eight inches are described. It is argued that the learning curve for the use of the Kew photoheliograph at the Royal Observatory, Greenwich, actually commenced in 1858, not 1874. The RGO daily number of sunspot groups is plotted graphically and analysed statistically. Similarly, the changes of metadata at each solar observatory are shown on the graphical plots and analysed statistically. It is concluded that neither the interleaving of data from the different solar observatories nor the changes in metadata invalidates the RGO count of the number of sunspot groups, which behaves as a quasi-homogeneous time series. Furthermore, it is emphasised that the correct treatment of days without photographs is quite crucial to the correct calculation of Group Sunspot Numbers.

  16. Calibration development strategies for the Daniel K. Inouye Solar Telescope (DKIST) data center

    NASA Astrophysics Data System (ADS)

    Watson, Fraser T.; Berukoff, Steven J.; Hays, Tony; Reardon, Kevin; Speiss, Daniel J.; Wiant, Scott

    2016-07-01

    The Daniel K. Inouye Solar Telescope (DKIST), currently under construction on Haleakalā, in Maui, Hawai'i will be the largest solar telescope in the world and will use adaptive optics to provide the highest resolution view of the Sun to date. It is expected that DKIST data will enable significant and transformative discoveries that will dramatically increase our understanding of the Sun and its effects on the Sun-Earth environment. As a result of this, it is a priority of the DKIST Data Center team at the National Solar Observatory (NSO) to be able to deliver timely and accurately calibrated data to the astronomical community for further analysis. This will require a process which allows the Data Center to develop calibration pipelines for all of the facility instruments, taking advantage of similarities between them, as well as similarities to current generation instruments. There will also be a challenges which are addressed in this article, such as the large volume of data expected, and the importance of supporting both manual and automated calibrations. This paper will detail the current calibration development strategies being used by the Data Center team at the National Solar Observatory to manage this calibration effort, so as to ensure delivery of high quality scientific data routinely to users.

  17. STATISTICAL DISTRIBUTION OF SIZE AND LIFETIME OF BRIGHT POINTS OBSERVED WITH THE NEW SOLAR TELESCOPE

    SciTech Connect

    Abramenko, Valentyna; Yurchyshyn, Vasyl; Goode, Philip; Kilcik, Ali

    2010-12-10

    We present results of 2 hr non-interrupted observations of solar granulation obtained under excellent seeing conditions with the largest aperture ground-based solar telescope-the New Solar Telescope (NST)-of Big Bear Solar Observatory. Observations were performed with adaptive optics correction using a broadband TiO filter in the 705.7 nm spectral line with a time cadence of 10 s and a pixel size of 0.''0375. Photospheric bright points (BPs) were detected and tracked. We find that the BPs detected in NST images are cospatial with those visible in Hinode/SOT G-band images. In cases where Hinode/SOT detects one large BP, NST detects several separated BPs. Extended filigree features are clearly fragmented into separate BPs in NST images. The distribution function of BP sizes extends to the diffraction limit of NST (77 km) without saturation and corresponds to a log-normal distribution. The lifetime distribution function follows a log-normal approximation for all BPs with lifetime exceeding 100 s. A majority of BPs are transient events reflecting the strong dynamics of the quiet Sun: 98.6% of BPs live less than 120 s. The longest registered lifetime was 44 minutes. The size and maximum intensity of BPs were found to be proportional to their lifetimes.

  18. The 2016 Transit of Mercury Observed from Major Solar Telescopes and Satellites

    NASA Astrophysics Data System (ADS)

    Pasachoff, Jay M.; Schneider, Glenn; Gary, Dale; Chen, Bin; Sterling, Alphonse C.; Reardon, Kevin P.; Dantowitz, Ronald; Kopp, Greg A.

    2016-10-01

    We report observations from the ground and space of the 9 May 2016 transit of Mercury. We build on our explanation of the black-drop effect in transits of Venus based on spacecraft observations of the 1999 transit of Mercury (Schneider, Pasachoff, and Golub, Icarus 168, 249, 2004). In 2016, we used the 1.6-m New Solar Telescope at the Big Bear Solar Observatory with active optics to observe Mercury's transit at high spatial resolution. We again saw a small black-drop effect as 3rd contact neared, confirming the data that led to our earlier explanation as a confluence of the point-spread function and the extreme solar limb darkening (Pasachoff, Schneider, and Golub, in IAU Colloq. 196, 2004). We again used IBIS on the Dunn Solar Telescope of the Sacramento Peak Observatory, as A. Potter continued his observations, previously made at the 2006 transit of Mercury, at both telescopes of the sodium exosphere of Mercury (Potter, Killen, Reardon, and Bida, Icarus 226, 172, 2013). We imaged the transit with IBIS as well as with two RED Epic IMAX-quality cameras alongside it, one with a narrow passband. We show animations of our high-resolution ground-based observations along with observations from XRT on JAXA's Hinode and from NASA's Solar Dynamics Observatory. Further, we report on the limit of the transit change in the Total Solar Irradiance, continuing our interest from the transit of Venus TSI (Schneider, Pasachoff, and Willson, ApJ 641, 565, 2006; Pasachoff, Schneider, and Willson, AAS 2005), using NASA's SORCE/TIM and the Air Force's TCTE/TIM. See http://transitofvenus.info and http://nicmosis.as.arizona.edu.Acknowledgments: We were glad for the collaboration at Big Bear of Claude Plymate and his colleagues of the staff of the Big Bear Solar Observatory. We also appreciate the collaboration on the transit studies of Robert Lucas (Sydney, Australia) and Evan Zucker (San Diego, California). JMP appreciates the sabbatical hospitality of the Division of Geosciences and

  19. A long duration balloon-borne telescope for solar gamma-ray astronomy

    NASA Technical Reports Server (NTRS)

    Owens, Alan; Chupp, Edward L.; Dunphy, Philip P.

    1989-01-01

    A new solar gamma-ray telescope is described which is intended to take advantage of current long-duration ballon facilities such as the RACOON system. The primary scientific objective is to detect and measure gamma-ray lines from solar flares, along with the associated low-energy continuum. The proposed instrument is centered on a multiheaded Ge system and is designed to operate over the energy range 50 keV to 200 200 MeV. In the nuclear transition energy region, the average energy resolution of the primary detectors is over 20 times better than that achieved with the gamma-ray spectrometer on the Solar Maximum Mission satellite.

  20. Photogrammetric Assessment of the Hubble Space Telescope Solar Arrays During the Second Servicing Mission

    NASA Technical Reports Server (NTRS)

    Sapp, C. A.; Dragg, J. L.; Snyder, M. W.; Gaunce, M. T.; Decker, J. E.

    1998-01-01

    This report documents the photogrammetric assessment of the Hubble Space Telescope (HST) solar arrays conducted by the NASA c Center Image Science and Analysis Group during Second Servicing Mission 2 (SM-2) on STS-82 in February 1997. Two type solar array analyses were conducted during the mission using Space Shuttle payload bay video: (1) measurement of solar array motion due to induced loads, and (2) measurement of the solar array static or geometric twist caused by the cumulative array loading. The report describes pre-mission planning and analysis technique development activities conducted to acquire and analyze solar array imagery data during SM-2. This includes analysis of array motion obtained during SM-1 as a proof-of-concept of the SM-2 measurement techniques. The report documents the results of real-time analysis conducted during the mission and subsequent analysis conducted post-flight. This report also provides a summary of lessons learned on solar array imagery analysis from SM-2 and recommendations for future on-orbit measurements applicable to HST SM-3 and to the International Space Station. This work was performed under the direction of the Goddard Space Flight Center HST Flight Systems and Servicing Project.

  1. Calibration development strategies for the Daniel K. Inouye Solar Telescope (DKIST) Data Center

    NASA Astrophysics Data System (ADS)

    Watson, Fraser; Reardon, Kevin P.; Berukoff, Steven J.; Hays, Tony; Wiant, Scott; Spiess, DJ

    2016-05-01

    As telescopes have grown larger and data rates have increased, so have the challenges in providing reliable and accurate calibration strategies for transforming raw data into useful science-ready outputs. The Daniel K. Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world and will use adaptive optics to provide the highest resolution view of the Sun. Its data acquisition rates will be in the hundreds of thousands of frames per day, and it will deliver an average of 12TB of raw solar data on a daily basis. DKIST data will enable significant and transformative discoveries that will dramatically increase our understanding of the Sun and its effects on the Sun-Earth environment. As such, it is a priority of the DKIST Data Center team at the National Solar Observatory (NSO) to be able to deliver timely and accurately calibrated data to the astronomical community for further analysis.The facility will execute a variety of investigator-driven observing programs, which will produce day-to-day variations in the types of acquired data. In combination with large data rates and limited personnel, this will require some degree of automation to be incorporated into the calibration workflows to facilitate the generation of scientifically useful data. The heterogeneity of the data and the unpredictable variations in the seeing conditions (on timescales of seconds or minutes) introduce complexity, which requires a self-adapting, extensible calibration pipeline to provide sufficient automation to the process. Our knowledge of the instrument performance and telescope characteristics will grow as the telescope begins operations, and continuously through the facility lifetime. The automated calibration pipelines will be capable of modification and improvement to incorporate the new information about the DKIST system, as well as potential improvements provided by the DKIST user community.This poster will detail the calibration development strategies being used

  2. High-performance parallel image reconstruction for the New Vacuum Solar Telescope

    NASA Astrophysics Data System (ADS)

    Li, Xue-Bao; Liu, Zhong; Wang, Feng; Jin, Zhen-Yu; Xiang, Yong-Yuan; Zheng, Yan-Fang

    2015-06-01

    Many technologies have been developed to help improve spatial resolution of observational images for ground-based solar telescopes, such as adaptive optics (AO) systems and post-processing reconstruction. As any AO system correction is only partial, it is indispensable to use post-processing reconstruction techniques. In the New Vacuum Solar Telescope (NVST), a speckle-masking method is used to achieve the diffraction-limited resolution of the telescope. Although the method is very promising, the computation is quite intensive, and the amount of data is tremendous, requiring several months to reconstruct observational data of one day on a high-end computer. To accelerate image reconstruction, we parallelize the program package on a high-performance cluster. We describe parallel implementation details for several reconstruction procedures. The code is written in the C language using the Message Passing Interface (MPI) and is optimized for parallel processing in a multiprocessor environment. We show the excellent performance of parallel implementation, and the whole data processing speed is about 71 times faster than before. Finally, we analyze the scalability of the code to find possible bottlenecks, and propose several ways to further improve the parallel performance. We conclude that the presented program is capable of executing reconstruction applications in real-time at NVST.

  3. Reflectivity, polarization properties, and durability of metallic mirror coatings for the European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Feller, A.; Krishnappa, N.; Pleier, O.; Hirzberger, J.; Jobst, P. J.; Schürmann, M.

    2012-09-01

    In the context of the conceptual design study for the European Solar Telescope (EST) we have investigated different metallic mirror coatings in terms of reflectivity, polarization properties and durability. Samples of the following coating types have been studied: bare aluminum, silver with different dielectric layers for protection and UV enhancement, and an aluminum-silver combination. From 2009 to 2011 we have carried out a long-term durability test under realistic observing conditions at the VTT solar telescope of the Observatorio del Teide (Tenerife, Spain), accompanied by repeated reflectivity measurements in the EST spectral working range (0.3 - 20 μm), and by polarization measurements in the visible range. The test results allow us to find the optimum coatings for the different mirrors in the EST beampath and to eventually assess aging effects and re-coating cycles. The results of the polarization measurements are a valuable input for an EST telescope polarization model, helping to meet the stringent requirements on polarimetric accuracy.

  4. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6 m New Solar Telescope.

    PubMed

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale; Wang, Haimin

    2016-04-13

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6 m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere's response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80-200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics.

  5. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6~m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale E.; Wang, Haimin

    2016-05-01

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6~m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere's response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80-200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics.

  6. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6 m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale; Wang, Haimin

    2016-04-01

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6 m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere’s response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80–200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics.

  7. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6 m New Solar Telescope

    PubMed Central

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale; Wang, Haimin

    2016-01-01

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6 m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere’s response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80–200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics. PMID:27071459

  8. Fabrication and testing of 4.2m off-axis aspheric primary mirror of Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Oh, Chang Jin; Lowman, Andrew E.; Smith, Greg A.; Su, Peng; Huang, Run; Su, Tianquan; Kim, Daewook; Zhao, Chunyu; Zhou, Ping; Burge, James H.

    2016-07-01

    Daniel K. Inouye Solar Telescope (formerly known as Advanced Technology Solar Telescope) will be the largest optical solar telescope ever built to provide greatly improved image, spatial and spectral resolution and to collect sufficient light flux of Sun. To meet the requirements of the telescope the design adopted a 4m aperture off-axis parabolic primary mirror with challenging specifications of the surface quality including the surface figure, irregularity and BRDF. The mirror has been completed at the College of Optical Sciences in the University of Arizona and it meets every aspect of requirement with margin. In fact this mirror may be the smoothest large mirror ever made. This paper presents the detail fabrication process and metrology applied to the mirror from the grinding to finish, that include extremely stable hydraulic support, IR and Visible deflectometry, Interferometry and Computer Controlled fabrication process developed at the University of Arizona.

  9. On the use of Cherenkov Telescopes for outer Solar system body occultations

    NASA Astrophysics Data System (ADS)

    Lacki, Brian C.

    2014-12-01

    Imaging Atmospheric Cherenkov Telescopes (IACTs) are arrays of very large optical telescopes that are well-suited for rapid photometry of bright sources. I investigate their potential in observing stellar occultations by small objects in the outer Solar system, Transjovian Objects (TJOs). These occultations cast diffraction patterns on the Earth. Current IACT arrays are capable of detecting objects smaller than 100 m in radius in the Kuiper Belt and 1 km radius out to 5000 au. The future Cherenkov Telescope Array (CTA) will have even greater capabilities. Because the arrays include several telescopes, they can potentially measure the speeds of TJOs without degeneracies, and the sizes of the TJOs and background stars. I estimate the achievable precision using a Fisher matrix analysis. With CTA, the precisions of these parameter estimations will be as good as a few per cent. I consider how often detectable occultations occur by members of different TJO populations, including Centaurs, Kuiper Belt Objects (KBOs), Oort Cloud objects, and satellites and Trojans of Uranus and Neptune. The great sensitivity of IACT arrays means that they likely detect KBO occultations once every O(10) hours when looking near the ecliptic. IACTs can also set useful limits on many other TJO populations.

  10. A near ultraviolet solar-blind telescope design using silicon CCD detectors

    NASA Astrophysics Data System (ADS)

    MacKenty, John W.

    2016-07-01

    We propose a novel approach to constructing a solar-blind near ultraviolet telescope using specialized mirror coatings. Each mirror in a three or four element optical system would have a coating reflective in the 200-300nm bandpass and transmissive at wavelengths longer than 300nm. This telescope can thus use CCD detectors providing high quantum efficiency, low noise, and a large pixel count. We have procured, from Materion Corporation, sample coatings with greater than 90% reflectance in the 200-300nm bandpass and less than 10% at wavelengths longer than 300nm. With three surfaces, these coatings provide <75% in band transmission for a telescope with better than 10,000 rejection at visible wavelengths. The use of ultraviolet optimized CCD detectors, combined with a three or four element telescope, would enable an Explorer class mission with near ultraviolet survey efficiency more than 100 times that of the recent GALEX mission. We will present measured reflectance and transmission curves from 200 - 1100nm for multiple samples. We will also show simulations of the expected performance of both 3 and 4 mirror systems for a conceptual space mission.

  11. Solar System Research with the Spacewatch 1.8-m Telescope

    NASA Technical Reports Server (NTRS)

    McMillan, Robert S.

    2001-01-01

    During this grant period, the 1.8-m Spacewatch telescope was put into routine operation to search for asteroids and comets ranging in location from near-Earth space to regions beyond the orbit of Neptune. All of these classes of objects can be detected simultaneously with our uniform scanning procedures. We are studying near Earth objects (NEOs), main belt asteroids, comets, Centaurs, and trans-Neptunian objects (TNOs), as well as the interrelationships of these classes and their bearing on the origin and evolution of the solar system. The Spacewatch 1.8-meter telescope is sensitive to V(mag) < 22.6 in sidereal scanning mode and is able to reach even fainter in longer 'staring' exposures, with a field of view 0.5 degrees square. These faint limits make the operation of the Spacewatch 1.8-m telescope complementary to asteroid surveys being done by other groups. Specifically, EAs smaller than 100 m in diameter and small main belt asteroids can be found, as well as more distant objects such as Centaurs/Scattered Disk Objects (SDOs) and TNOs. The 1.8-m telescope is also being used to do recoveries and astrometry of recently-discovered asteroids that subsequently become too faint for the other groups before good orbits are established.

  12. Rocket studies of solar corona and transition region. [X-Ray spectrometer/spectrograph telescope

    NASA Technical Reports Server (NTRS)

    Acton, L. W.; Bruner, E. C., Jr.; Brown, W. A.; Nobles, R. A.

    1979-01-01

    The XSST (X-Ray Spectrometer/Spectrograph Telescope) rocket payload launched by a Nike Boosted Black Brant was designed to provide high spectral resolution coronal soft X-ray line information on a spectrographic plate, as well as time resolved photo-electric records of pre-selected lines and spectral regions. This spectral data is obtained from a 1 x 10 arc second solar region defined by the paraboloidal telescope of the XSST. The transition region camera provided full disc images in selected spectral intervals originating in lower temperature zones than the emitting regions accessible to the XSST. A H-alpha camera system allowed referencing the measurements to the chromospheric temperatures and altitudes. Payload flight and recovery information is provided along with X-ray photoelectric and UV flight data, transition camera results and a summary of the anomalies encountered. Instrument mechanical stability and spectrometer pointing direction are also examined.

  13. Isoplanatic patch considerations for solar telescope multi-conjugate adaptive optics

    NASA Astrophysics Data System (ADS)

    Beckers, Jacques M.

    2014-08-01

    I compare recent site surveys for the future large 4-meter solar and 30-meter nighttime telescopes at the nearby Haleakala and Mauna Kea sites respectively. They show that the outstanding early morning image quality at the solar site corresponds indeed to that observed at the late night one at the nighttime site. That confirms the notion that daytime solar site heating only shows itself later in the morning. The nighttime survey includes observations of the refractive index structure function Cn 2(h) to high altitudes from which the radius of the isoplanatic patch (Ɵ0) can be determined. At zenith (ζ = 00) it equals 2.5 arcsec at 500 nm wavelength. For the early morning (best) seeing at the solar site, which occurs at ζsun = 750 and the cos1.6(ζ) dependence of Θ0,that means an extremely small Ɵ0 (0.26 arcsec). Such small values compromise Adaptive Optics (AO) solar correlation wavefront sensing for which areas are needed equal to about 8"× 8" I suggest options for measuring Cn2(h), and therefore Ɵ0, during the day. These make use of the solar image as well as of daytime images of bright stars and planets. Some use the MASS technique on stars; some use the SHABAR technique using very large detector baselines on the Sun and shorter baselines on planets. It is suggested that these Cn2(h) measurements are made also during regular solar observations. In that way optimal solar observations can be planned using real-time Ɵ0 observations by image selection and optimization of the MCAO configuration.

  14. Capabilities of the Thirty-Meter Telescope (TMT) for Solar System Astronomy

    NASA Astrophysics Data System (ADS)

    Otarola, Angel; Dumas, Christophe; Meech, Karen; Sekiguchi, Tomohiko; Skidmore, Warren; Tian, Feng; Travouillon, Tony; Wong, Michael H.; Ellerbroek, Brent; Simard, Luc

    2015-11-01

    The TMT will consist of a 30-m filled-aperture segmented primary mirror and will include non-sidereal rate tracking capabilities for observing Solar System objects. Its sensitivity will be 14 times larger than that of 8-m class telescopes for seeing-limited observations -up to 200 times larger for background limited adaptive optics (AO) observations- and will allow high angular/spatial resolution with diffraction-limited capability in the near infrared. AO guiding will accommodate faint, small angular size solar system objects to serve as natural guide stars for non-sidereal observations. For Kuiper belt objects (KBOs), on-instrument wavefront sensors can crawl the field-of-view to look for background natural stars that can be used for tip/tilt correction. We will describe the main characteristics of the Thirty Meter Telescope, its first light instrumentation suite, and the most relevant science-driven requirements for its design, emphasizing the strengths of the TMT for Solar System astronomical research. Some real-case scenarios of sensitivities for solar system targets will be presented for the first-light instruments.Complementary information about TMT, and the opportunities it offers for planetary science research, will be presented at this meeting by Dumas et al., and at the TMT Solar System Town Hall event on Tuesday.The international TMT partnership includes Canada, China, India, Japan, Caltech, the University of California, and Funding is also provided by the Gordon and Betty Moore Foundation. AURA is an Associate Member of TMT on behalf of the US national community. Through a cooperative agreement with the NSF, TMT and a US TMT Science Working Group are developing a model for potential US national partnership in the TMT.

  15. The New Solar Shape and Oscillations Telescope (NSSOT) Experiment for SOLARNET

    NASA Astrophysics Data System (ADS)

    Damé, L.

    The diameter was observed to be constant over the solar cycle and as such will never be a proper solar-terrestrial climate indicator ground measures with small telescopes are spurius the Maunder Minimum ones of Picard during the XVII century not being an exception Large instruments like the 45 cm Gregorys of Axel Wittmann in Locarno and Tenerife which average seeing cells see no variations ll 40 mas as well as the space instrument MDI SOHO naturally not affected by turbulence either We present the 4 approaches Wittmann on ground with large telescopes Emilio et al 2000 and Kuhn et al 2004 whom used the 6 pixels limb data of MDI Antia 2003 with a completely different method since using the ultra-precise frequency variation of the f-modes and our approach Dam e and Cugnet 2006 using the complete 7 years of filtergrams data 150 000 photograms and magnetograms of the SOHO MDI experiment These 4 careful analysis converge towards the same insignificant below 15 mas variations or even less 0 6 km 0 8 mas in the helioseismology approach Following Antia we can conclude that If a careful analysis is performed then it turns out that there is no evidence for any variation in the solar radius There were no theoretical reasons for large solar radius variations and there is no observational evidence for them with consistent ground and space observations This being stated and admitted the radius measure keeps interest through the solar shape that might change along the cycle sub-surface convective flows

  16. Extra Solar Planetary Imaging Coronagraph and Science Requirements for the James Webb Telescope Observatory

    NASA Technical Reports Server (NTRS)

    Clampin, Mark

    2004-01-01

    1) Extra solar planetary imaging coronagraph. Direct detection and characterization of Jovian planets, and other gas giants, in orbit around nearby stars is a necessary precursor to Terrestrial Planet Finder 0 in order to estimate the probability of Terrestrial planets in our stellar neighborhood. Ground based indirect methods are biased towards large close in Jovian planets in solar systems unlikely io harbor Earthlike planets. Thus to estimate the relative abundances of terrestrial planets and to determine optimal observing strategies for TPF a pathfinder mission would be desired. The Extra-Solar Planetary Imaging Coronagraph (EPIC) is such a pathfinder mission. Upto 83 stellar systems are accessible with a 1.5 meter unobscured telescope and coronagraph combination located at the Earth-Sun L2 point. Incorporating radiometric and angular resolution considerations show that Jovians could be directly detected (5 sigma) in the 0.5 - 1.0 micron band outside of an inner working distance of 5/D with integration times of -10 - 100 hours per observation. The primary considerations for a planet imager are optical wavefront quality due to manufacturing, alignment, structural and thermal considerations. pointing stability and control, and manufacturability of coronagraphic masks and stops to increase the planetary-to- stellar contrast and mitigate against straylight. Previously proposed coronagraphic concepts are driven to extreme tolerances. however. we have developed and studied a mission, telescope and coronagraphic detection concept, which is achievable in the time frame of a Discovery class NASA mission. 2) Science requirements for the James Webb Space Telescope observatory. The James Webb Space Observatory (JWST) is an infrared observatory, which will be launched in 201 1 to an orbit at L2. JWST is a segmented, 18 mirror segment telescope with a diameter of 6.5 meters, and a clear aperture of 25 mA2. The telescope is designed to conduct imaging and spectroscopic

  17. Use of ground-based telescopes in determining the composition of the surfaces of solar system objects

    NASA Technical Reports Server (NTRS)

    Mccord, T. B.; Adams, J. B.

    1977-01-01

    Recent evidence suggests that the way that the surfaces of the solar system objects reflect solar radiation is controlled by the composition and mineralogy of the surface materials. The way sunlight is reflected from the surface as a function of wavelength, i.e., the spectral reflectance, is the most important property. Laboratory efforts to use ground-based optical telescope measurements to determine the composition of the surfaces of the solar system objects are reviewed.

  18. A Novel Lateral Deployment Mechanism for Segmented Mirror/Solar Panel of Space Telescope

    NASA Astrophysics Data System (ADS)

    Thesiya, Dignesh; Srinivas, A. R.; Shukla, Piyush

    2015-09-01

    Space telescopes require large aperture primary mirrors to capture High Definition (HD) ground image while orbiting around the Earth. Fairing Volume of launch vehicles is limited and thus the size of monolithic mirror is limited to fairing size and solar panels are arranged within a petal formation in order to provide a greater power to volume ratio. This generates need for deployable mirrors for space use. This brings out a method for designing new deployment mechanism for segmented mirror. Details of mechanism folding strategy, design of components, FE simulations, realization and Lab model validation results are discussed in order to demonstrate the design using prototype.

  19. Advanced Scintillator-Based Compton Telescope for Solar Flare Gamma-Ray Measurements

    NASA Astrophysics Data System (ADS)

    Ryan, James Michael; Bloser, Peter; McConnell, Mark; Legere, Jason; Bancroft, Christopher; Murphy, Ronald; de Nolfo, Georgia

    2015-04-01

    A major goal of future Solar and Heliospheric Physics missions is the understanding of the particle acceleration processes taking place on the Sun. Achieving this understanding will require detailed study of the gamma-ray emission lines generated by accelerated ions in solar flares. Specifically, it will be necessary to study gamma-ray line ratios over a wide range of flare intensities, down to small C-class flares. Making such measurements over such a wide dynamic range, however, is a serious challenge to gamma-ray instrumentation, which must deal with large backgrounds for faint flares and huge counting rates for bright flares. A fast scintillator-based Compton telescope is a promising solution to this instrumentation challenge. The sensitivity of Compton telescopes to solar flare gamma rays has already been demonstrated by COMPTEL, which was able to detect nuclear emission from a C4 flare, the faintest such detection to date. Modern fast scintillators, such as LaBr3, and CeBr3, are efficient at stopping MeV gamma rays, have sufficient energy resolution (4% or better above 0.5 MeV) to resolve nuclear lines, and are fast enough (~15 ns decay times) to record at very high rates. When configured as a Compton telescope in combination with a modern organic scintillator, such as p-terphenyl, sub-nanosecond coincidence resolving time allows dramatic suppression of background via time-of-flight (ToF) measurements, allowing both faint and bright gamma-ray line flares to be measured. The use of modern light readout devices, such as silicon photomultipliers (SiPMs), eliminates passive mass and permits a more compact, efficient instrument. We have flown a prototype Compton telescope using modern fast scintillators with SiPM readouts on a balloon test flight, achieving good ToF and spectroscopy performance. A larger balloon-borne instrument is currently in development. We present our test results and estimates of the solar flare sensitivity of a possible full-scale instrument

  20. The thermal environment of the fiber glass dome for the new solar telescope at Big Bear Solar Observatory

    NASA Astrophysics Data System (ADS)

    Verdoni, A. P.; Denker, C.; Varsik, J. R.; Shumko, S.; Nenow, J.; Coulter, R.

    2007-09-01

    The New Solar Telescope (NST) is a 1.6-meter off-axis Gregory-type telescope with an equatorial mount and an open optical support structure. To mitigate the temperature fluctuations along the exposed optical path, the effects of local/dome-related seeing have to be minimized. To accomplish this, NST will be housed in a 5/8-sphere fiberglass dome that is outfitted with 14 active vents evenly spaced around its perimeter. The 14 vents house louvers that open and close independently of one another to regulate and direct the passage of air through the dome. In January 2006, 16 thermal probes were installed throughout the dome and the temperature distribution was measured. The measurements confirmed the existence of a strong thermal gradient on the order of 5° Celsius inside the dome. In December 2006, a second set of temperature measurements were made using different louver configurations. In this study, we present the results of these measurements along with their integration into the thermal control system (ThCS) and the overall telescope control system (TCS).

  1. Using frequency response functions to manage image degradation from equipment vibration in the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    McBride, William R.; McBride, Daniel R.

    2016-08-01

    The Daniel K Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, providing a significant increase in the resolution of solar data available to the scientific community. Vibration mitigation is critical in long focal-length telescopes such as the Inouye Solar Telescope, especially when adaptive optics are employed to correct for atmospheric seeing. For this reason, a vibration error budget has been implemented. Initially, the FRFs for the various mounting points of ancillary equipment were estimated using the finite element analysis (FEA) of the telescope structures. FEA analysis is well documented and understood; the focus of this paper is on the methods involved in estimating a set of experimental (measured) transfer functions of the as-built telescope structure for the purpose of vibration management. Techniques to measure low-frequency single-input-single-output (SISO) frequency response functions (FRF) between vibration source locations and image motion on the focal plane are described. The measurement equipment includes an instrumented inertial-mass shaker capable of operation down to 4 Hz along with seismic accelerometers. The measurement of vibration at frequencies below 10 Hz with good signal-to-noise ratio (SNR) requires several noise reduction techniques including high-performance windows, noise-averaging, tracking filters, and spectral estimation. These signal-processing techniques are described in detail.

  2. Feasibility study of a layer-oriented wavefront sensor for solar telescopes.

    PubMed

    Marino, Jose; Wöger, Friedrich

    2014-02-01

    Solar multiconjugate adaptive optics systems rely on several wavefront sensors, which measure the incoming turbulent phase along several field directions to produce a tomographic reconstruction of the turbulent phase. In this paper, we explore an alternative wavefront sensing approach that attempts to directly measure the turbulent phase present at a particular height in the atmosphere: a layer-oriented cross-correlating Shack-Hartmann wavefront sensor (SHWFS). In an experiment at the Dunn Solar Telescope, we built a prototype layer-oriented cross-correlating SHWFS system conjugated to two separate atmospheric heights. We present the data obtained in the observations and complement these with ray-tracing computations to achieve a better understanding of the instrument's performance and limitations. The results obtained in this study strongly indicate that a layer-oriented cross-correlating SHWFS is not a practical design to measure the wavefront at a high layer in the atmosphere.

  3. Solar-B X-ray Telescope (XRT) Concept Study Report

    NASA Technical Reports Server (NTRS)

    Golub, Leon

    1999-01-01

    The X-ray observations from the Yohkoh SXT provided the greatest step forward in our understanding of the solar corona in nearly two decades. Expanding on the accomplishments of Yohkoh, we believe that the scientific objectives of the Solar-B mission are achieved with a significantly improved X-ray telescope (XRT) similar to the SXT. The Solar-B XRT will have twice the spatial resolution and a broader temperature response, while building on the knowledge gained from the successful Yohkoh mission. We present the scientific justification for this view, discuss the instrumental requirements that flow from the scientific objectives, and describe the instrumentation to meet these requirements. We then provide a detailed discussion of the design activities carried out during Phase A, noting the conclusions that were reached in terms of their implications for the detailed design activities which are now commencing. Details of the instrument that have changed as a result of the Phase A studied are specifically noted, and areas of concern going into Phase B are highlighted. XRT is a grazing-incidence (GI) modified Wolter I X-ray telescope, of 35cm inner diameter and 2.7m focal length. The 2048x2048 back-illuminated CCD (now an ISAS responsibility) has 13.5 micron pixels, corresponding to 1.0 arcsec and giving full Sun field of view. This will be the highest resolution GI X-ray telescope ever flown for Solar coronal studies, and it has been designed specifically to observe both the high and low temperature coronal plasma. A small optical telescope provides visible light images for co-alignment with the Solar-B optical and EUV instruments. The XRT science team is working in close cooperation with our Japanese colleagues in the design and construction of this instrument. All of the expertise and resources of the High Energy and Solar/Stellar Divisions of the Center for Astrophysics are being made available to this program, and our team will carry its full share of

  4. Project management and control of the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    McMullin, Joseph P.; McVeigh, William; Warner, Mark; Rimmele, Thomas R.; Craig, Simon C.; Ferayorni, Andrew; Goodrich, Bret D.; Hubbard, Robert P.; Hunter, Rex; Jeffers, Paul; Johansson, Erik; Marshall, Heather; McBride, William R.; Phelps, LeEllen; Shimko, Steve; Tritschler, Alexandra; Williams, Timothy R.; Wöger, Friedrich

    2016-08-01

    We provide a brief update on the construction status of the Daniel K. Inouye Solar Telescope, a $344M, 10-year construction project to design and build the world's largest solar physics observatory. We review the science drivers along with the challenges in meeting the evolving scientific needs over the course of the construction period without jeopardizing the systems engineering and management realization. We review the tools, processes and performance measures in use in guiding the development as well as the risks and challenges as the project transitions through various developmental phases. We elaborate on environmental and cultural compliance obligations in building in Hawai'i. We discuss the broad "lessons learned". Finally, we discuss the project in the context of the evolving management oversight within the US (in particular under the NSF).

  5. Adaptive system for solar telescopes operating in the strongly turbulent atmosphere

    NASA Astrophysics Data System (ADS)

    Antoshkin, L. V.; Botugina, N. N.; Bolbasova, L. A.; Demidov, M. L.; Grigoriev, V. M.; Emaleev, O. N.; Konyaev, P. A.; Kopylov, E. A.; Kovadlo, P. G.; Kudryashov, A. V.; Lavrinov, V. V.; Lavrinova, L. N.; Lukin, V. P.; Shikhovtcev, A. Yu.; Trifonov, V. D.

    2016-07-01

    In this article, we describe the development of the newest adaptive optics system for the Big Solar Vacuum Telescope of the Baikal Astrophysical Observatory. This system is a result of collaboration between VE Zuev Institute of Atmospheric Optics SB RAS, Tomsk, and Institute of Solar-Terrestrial Physics SB RAS, Irkutsk. The system includes two active mirrors for the correction: domestic tip-tilt and bimorph deformable (Active Optics NightN Ltd.), and separate wavefront sensors (WFS). A correlation S-H wave-front sensor is based on a Allies Prosilica GX-1050 GigE camera with speed of 309 Hz and frame size of 1248x1248 pixels. A personal computer is used for bimorph deformable mirror image processing. The mirror was successfully used during the 2010-2014 observing seasons. The system developed is capable of correcting up to 35 modes, thus providing diffraction limited images at visible wavelengths.

  6. Preparing the Public for the James Webb Space Telescope and its Exploration of the Solar System

    NASA Astrophysics Data System (ADS)

    Green, Joel D.; Smith, Denise A.; Meinke, Bonnie K.; Jirdeh, Hussein; Office of Public Outreach

    2016-10-01

    The James Webb Space Telescope (JWST) is the successor to the Hubble Space Telescope. STScI and the Office of Public Outreach are committed to bringing awareness of the technology, the excitement, and the future science potential of this great observatory to the public and to the scientific community, prior to its 2018 launch. The challenges in ensuring the high profile of JWST (understanding the infrared, the vast distance to the telescope's final position, and the unfamiliar science territory) requires us to lay the proper background. We currently engage the full range of the public and scientific communities using a variety of high impact, memorable initiatives, in combination with modern technologies to extend reach, linking the science goals of Webb to the ongoing discoveries being made by Hubble. We have injected Webb-specific content into ongoing outreach programs: for example, simulated, scientifically-inspired but aesthetic JWST scenes (illustrating the differences between JWST and previous missions); partnering with high impact science communicators such as MinutePhysics to produce timely and concise content; incorporating JWST science into activities at large scale events. JWST has unique observational capabilities that optimize its ability ot study the Solar System: monitoring weather, tracking and measuring dusty objects, collaborative parallax observations with other observatories, and more. We discuss some of the ways we engage the public on these concepts.

  7. Life Cycle Testing of Viscoelastic Material for Hubble Space Telescope Solar Array 3 Damper

    NASA Technical Reports Server (NTRS)

    Maly, Joseph R.; Reed, Benjamin B.; Viens, Michael J.; Parker, Bradford H.; Pendleton, Scott C.

    2003-01-01

    During the March 2002 Servicing Mission by Space Shuttle (STS 109), the Hubble Space Telescope (HST) was refurbished with two new solar arrays that now provide all of its power. These arrays were built with viscoelastic/titanium dampers, integral to the supporting masts, which reduce the interaction of the wing bending modes with the Telescope. Damping of over 3% of critical was achieved. To assess the damper s ability to maintain nominal performance over the 10-year on-orbit design goal, material specimens were subjected to an accelerated life test. The test matrix consisted of scheduled events to expose the specimens to pre-determined combinations of temperatures, frequencies, displacement levels, and numbers of cycles. These exposure events were designed to replicate the life environment of the damper from fabrication through testing to launch and life on-orbit. To determine whether material degradation occurred during the exposure sequence, material performance was evaluated before and after the accelerated aging with complex stiffness measurements. Based on comparison of pre- and post-life-cycle measurements, the material is expected to maintain nominal performance through end of life on-orbit. Recent telemetry from the Telescope indicates that the dampers are performing nominally.

  8. Photometry’s Bright Future: Detecting Solar System Analogs with Future Space Telescopes

    NASA Astrophysics Data System (ADS)

    Hippke, Michael; Angerhausen, Daniel

    2015-09-01

    Time-series transit photometry from the Kepler space telescope has allowed for the discovery of thousands of exoplanets. We explore the potential of yet improved future missions such as PLATO 2.0 in detecting solar system analogs. We use real-world solar data and end-to-end simulations to explore the stellar and instrumental noise properties. By injecting and retrieving planets, rings, and moons of our own solar system, we show that the discovery of Venus and Earth analogs transiting G dwarfs like our Sun is feasible at high signal-to-noise ratio after collecting 6 yr of data, but Mars and Mercury analogs will be difficult to detect owing to stellar noise. In the best cases, Saturn’s rings and Jupiter’s moons will be detectable even in single-transit observations. Through the high number (>1 billion) of observed stars by PLATO 2.0, it will become possible to detect thousands of single-transit events by cold gas giants, analogs to our Jupiter, Saturn, Uranus, and Neptune. Our own solar system aside, we also show, through signal injection and retrieval, that PLATO 2.0 class photometry will allow for the secure detection of exomoons transiting quiet M dwarfs. This is the first study analyzing in depth the potential of future missions and the ultimate limits of photometry, using realistic case examples.

  9. Search for sub-eV mass solar axions by the CERN Axion Solar Telescope with 3He buffer gas.

    PubMed

    Arik, M; Aune, S; Barth, K; Belov, A; Borghi, S; Bräuninger, H; Cantatore, G; Carmona, J M; Cetin, S A; Collar, J I; Dafni, T; Davenport, M; Eleftheriadis, C; Elias, N; Ezer, C; Fanourakis, G; Ferrer-Ribas, E; Friedrich, P; Galán, J; García, J A; Gardikiotis, A; Gazis, E N; Geralis, T; Giomataris, I; Gninenko, S; Gómez, H; Gruber, E; Guthörl, T; Hartmann, R; Haug, F; Hasinoff, M D; Hoffmann, D H H; Iguaz, F J; Irastorza, I G; Jacoby, J; Jakovčić, K; Karuza, M; Königsmann, K; Kotthaus, R; Krčmar, M; Kuster, M; Lakić, B; Laurent, J M; Liolios, A; Ljubičić, A; Lozza, V; Lutz, G; Luzón, G; Morales, J; Niinikoski, T; Nordt, A; Papaevangelou, T; Pivovaroff, M J; Raffelt, G; Rashba, T; Riege, H; Rodríguez, A; Rosu, M; Ruz, J; Savvidis, I; Silva, P S; Solanki, S K; Stewart, L; Tomás, A; Tsagri, M; van Bibber, K; Vafeiadis, T; Villar, J A; Vogel, J K; Yildiz, S C; Zioutas, K

    2011-12-23

    The CERN Axion Solar Telescope (CAST) has extended its search for solar axions by using (3)He as a buffer gas. At T=1.8 K this allows for larger pressure settings and hence sensitivity to higher axion masses than our previous measurements with (4)He. With about 1 h of data taking at each of 252 different pressure settings we have scanned the axion mass range 0.39 eV≲m(a)≲0.64 eV. From the absence of excess x rays when the magnet was pointing to the Sun we set a typical upper limit on the axion-photon coupling of g(aγ)≲2.3×10(-10) GeV(-1) at 95% C.L., the exact value depending on the pressure setting. Kim-Shifman-Vainshtein-Zakharov axions are excluded at the upper end of our mass range, the first time ever for any solar axion search. In the future we will extend our search to m(a)≲1.15 eV, comfortably overlapping with cosmological hot dark matter bounds.

  10. MAST - A mass spectrometer telescope for studies of the isotopic composition of solar, anomalous, and galactic cosmic ray nuclei

    NASA Technical Reports Server (NTRS)

    Cook, Walter R.; Cummings, Alan C.; Cummings, Jay R.; Garrard, Thomas L.; Kecman, Branislav; Mewaldt, Richard A.; Selesnick, Richard S.; Stone, Edward C.; Von Rosenvinge, T. T.

    1993-01-01

    The Mass Spectrometer Telescope (MAST) on SAMPEX is designed to provide high resolution measurements of the isotopic composition of energetic nuclei from He to Ni (Z = 2 to 28) over the energy range from about 10 to several hundred MeV/nuc. During large solar flares MAST will measure the isotopic abundances of solar energetic particles to determine directly the composition of the solar corona, while during solar quiet times MAST will study the isotopic composition of galactic cosmic rays. In addition, MAST will measure the isotopic composition of both interplanetary and trapped fluxes of anomalous cosmic rays, believed to be a sample of the nearby interstellar medium.

  11. DETECTION OF SMALL-SCALE GRANULAR STRUCTURES IN THE QUIET SUN WITH THE NEW SOLAR TELESCOPE

    SciTech Connect

    Abramenko, V. I.; Yurchyshyn, V. B.; Goode, P. R.; Kitiashvili, I. N.; Kosovichev, A. G.

    2012-09-10

    Results of a statistical analysis of solar granulation are presented. A data set of 36 images of a quiet-Sun area on the solar disk center was used. The data were obtained with the 1.6 m clear aperture New Solar Telescope at Big Bear Solar Observatory and with a broadband filter centered at the TiO (705.7 nm) spectral line. The very high spatial resolution of the data (diffraction limit of 77 km and pixel scale of 0.''0375) augmented by the very high image contrast (15.5% {+-} 0.6%) allowed us to detect for the first time a distinct subpopulation of mini-granular structures. These structures are dominant on spatial scales below 600 km. Their size is distributed as a power law with an index of -1.8 (which is close to the Kolmogorov's -5/3 law) and no predominant scale. The regular granules display a Gaussian (normal) size distribution with a mean diameter of 1050 km. Mini-granular structures contribute significantly to the total granular area. They are predominantly confined to the wide dark lanes between regular granules and often form chains and clusters, but different from magnetic bright points. A multi-fractality test reveals that the structures smaller than 600 km represent a multi-fractal, whereas on larger scales the granulation pattern shows no multi-fractality and can be considered as a Gaussian random field. The origin, properties, and role of the population of mini-granular structures in the solar magnetoconvection are yet to be explored.

  12. NEW VACUUM SOLAR TELESCOPE OBSERVATIONS OF A FLUX ROPE TRACKED BY A FILAMENT ACTIVATION

    SciTech Connect

    Yang, Shuhong; Zhang, Jun; Liu, Zhong; Xiang, Yongyuan E-mail: zjun@nao.cas.cn

    2014-04-01

    One main goal of the New Vacuum Solar Telescope (NVST) which is located at the Fuxian Solar Observatory is to image the Sun at high resolution. Based on the high spatial and temporal resolution NVST Hα data and combined with the simultaneous observations from the Solar Dynamics Observatory for the first time, we investigate a flux rope tracked by filament activation. The filament material is initially located at one end of the flux rope and fills in a section of the rope; the filament is then activated by magnetic field cancellation. The activated filament rises and flows along helical threads, tracking the twisted flux rope structure. The length of the flux rope is about 75 Mm, the average width of its individual threads is 1.11 Mm, and the estimated twist is 1π. The flux rope appears as a dark structure in Hα images, a partial dark and partial bright structure in 304 Å, and as a bright structure in 171 Å and 131 Å images. During this process, the overlying coronal loops are quite steady since the filament is confined within the flux rope and does not erupt successfully. It seems that, for the event in this study, the filament is located and confined within the flux rope threads, instead of being suspended in the dips of twisted magnetic flux.

  13. Feasibility study of a layer-oriented wavefront sensor for solar telescopes: comment.

    PubMed

    Kellerer, Aglaé

    2014-11-10

    The future generation of telescopes will be equipped with multi-conjugate adaptive-optics (MCAO) systems in order to obtain high angular resolution over large fields of view. MCAO comes in two flavors: star- and layer-oriented. Existing solar MCAO systems rely exclusively on the star-oriented approach. Earlier we suggested a method to implement the layer-oriented approach, and in view of recent concerns by Marino and Wöger [Appl. Opt.53, 685 (2014)10.1364/AO.53.000685APOPAI1559-128X], we now explain the proposed scheme in further detail. We note that in any layer-oriented system one sensor is conjugated to the pupil and the others are conjugated to higher altitudes. For the latter, not all the sensing surface is illuminated by the entire field of view. The successful implementation of nighttime layer-oriented systems shows that the field reduction is no crucial limitation. In the solar approach the field reduction is directly noticeable because it causes vignetting of the Shack-Hartmann subaperture images. It can be accounted for by a suitable adjustment of the algorithms to calculate the local wavefront slopes. We discuss a further concern related to the optical layout of a layer-oriented solar system.

  14. A year of operation of Melibea e-Callisto Solar Radio Telescope

    NASA Astrophysics Data System (ADS)

    Russu, A.; Gómez-Herrero, R.; Prieto, M.; Monstein, C.; Ivanov, H.; Rodríguez-Pacheco, J.; Blanco, J. J.

    2015-08-01

    The e-CALLISTO (Compound Astronomical Low-cost Low-frequency Instrument for Spectroscopy and Transportable Observatory) is a worldwide radio-spectrograph network with 24 hours a day solar radio burst monitoring. The e-CALLISTO network is led by the Swiss Federal Institute of Technology Zurich (ETHZ Zurich), which work up collaborations with local host institutions. In 2013 the University of Alcalá joined the e-CALLISTO network with the installation of two Solar Radio Telescopes (SRT): the EA4RKU-SRT that was located at the University of Alcalá from January 2013 till June 2013 and the Melibea-SRT that is located at Peralejos de las Truchas (Guadalajara) in operation from June 2013. The Spanish e-Callisto SRTs provide routine data to the network. We present examples of type III and type II radio-bursts observed by Melibea during its first year of operation and study their relation with soft X-ray flares observed by GOES and Coronal Mass Ejections (CMEs) and Solar Energetic Particle (SEP) events observed by space-borne instrumentation.

  15. James Webb Space Telescope Observations of Stellar Occultations by Solar System Bodies and Rings

    NASA Technical Reports Server (NTRS)

    Santos-Sanz, P.; French, R. G.; Pinilla-Alonso, N.; Stansberry, J.; Lin, Z-Y.; Zhang, Z-W.; Vilenius, E.; Mueller, Th.; Ortiz, J. L.; Braga-Ribas, F.; Bosh, A.; Duffard, R.; Lellouch, E.; Tancredi, G.; Young, Leslie; Milam, Stefanie N.

    2016-01-01

    In this paper, we investigate the opportunities provided by the James Webb Space Telescope (JWST) for significant scientific advances in the study of Solar System bodies and rings using stellar occultations. The strengths and weaknesses of the stellar occultation technique are evaluated in light of JWST's unique capabilities. We identify several possible JWST occultation events by minor bodies and rings and evaluate their potential scientific value. These predictions depend critically on accurate a priori knowledge of the orbit of JWST near the Sun–Earth Lagrange point 2 (L2). We also explore the possibility of serendipitous stellar occultations by very small minor bodies as a byproduct of other JWST observing programs. Finally, to optimize the potential scientific return of stellar occultation observations, we identify several characteristics of JWST's orbit and instrumentation that should be taken into account during JWST's development.

  16. A solar extreme ultraviolet telescope and spectrograph for space shuttle. Volume 1: Investigation and technical plan

    NASA Technical Reports Server (NTRS)

    Neupert, W. M.

    1978-01-01

    A scientific investigation of heating and mass transport in the solar corona that is currently planned for a future Shuttle/Spacelab flight is outlined. The instrument to be used is a near-normal incidence grating spectrograph fed by a grazing incidence Wolter Type 2 telescope. A toroidal grating design provides stigmatic images of the corona up to 8 arc min in extent over the spectral region from 225 A to 370 A. Spatial resolution of at least 2 arc sec and spectral resolution of 0.050 A is achievable throughout the central 4 arc min field or view. Primary scientific data are recorded on Schumann-type film. An H-alpha slit jaw monitor and zero order extreme ultraviolet monitor are also planned to support instrument operation.

  17. Application of Finite Element Method to the structure design of the Space Solar Telescope

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Chen, Zhi-Yuan; Chen, Zhi-Ping; Yang, Shi-Mo

    2005-12-01

    Finite Element Method (FEM), the primary numerical means to process structure analysis in the modern engineering field, is adopted widely in the design of astronomical instruments at present. It can help designers to find out various characteristics of the object, to discover the weakness in stiffness and strength, and to improve and optimize the design as well. It is also used widely in many processes during the designing of the Space Solar Telescope (SST), such as in the main truss and the primary cell. From the beginning of the geometry modeling and the finite element creating, many aspects such as linear static, modal analysis, transient response and thermal analysis are demonstrated in SST. The error existing in the FEM, why it exists, and how to reduce it are discussed. Finally, the development trend of FEM in the astronomical instruments especially the space astronomical instruments is presented.

  18. Design of the Polarimeter for the Fibre Arrayed Solar Optical Telescope

    NASA Astrophysics Data System (ADS)

    Dun, Guang-tao; Qu, Zhong-quan

    2013-01-01

    The theoretical design of the polarimeter used for the Fibre Arrayed Solar Optical Telescope (FASOT) is described. It has the following characteris- tics: (1) It is provided with the function of optical polarization switching, which makes the high-effciency polarimetry possible; (2) In the waveband of 750 nm, the polarimetric effciency is higher than 50% for the every Stokes parameter, and higher than 86.6% for the total polarization, thus an observer can make the simultaneous polarization measurements on multiple magnetosensitive lines in such a broad range of wavelength; (3) According to the selected photospheric and chromospheric lines, the measurement can be focused on either linear polarization or circular polarization; (4) The polarimeter has a loose tolerance on the manufacturing technology of polarimetric elements and installation errors. All this makes this polarimeter become a high-performance polarimetric device.

  19. Solar Effects on Tensile and Optical Properties of Hubble Space Telescope Silver-Teflon(Registered Trademark) Insulation

    NASA Technical Reports Server (NTRS)

    deGroh, Kim, K.; Dever, Joyce A.; Snyder, Aaron; Kaminski, Sharon; McCarthy, Catherine E.; Rapoport, Alison L.; Rucker, Rochelle N.

    2006-01-01

    A section of the retrieved Hubble Space Telescope (HST) solar array drive arm (SADA) multilayer insulation (MLI), which experienced 8.25 years of space exposure, was analyzed for environmental durability of the top layer of silver-Teflon (DuPont) fluorinated ethylene propylene (Ag-FEP). Because the SADA MLI had solar and anti-solar facing surfaces and was exposed to the space environment for a long duration, it provided a unique opportunity to study solar effects on the environmental degradation of Ag-FEP, a commonly used spacecraft thermal control material. Data obtained included tensile properties, solar absorptance, surface morphology and chemistry. The solar facing surface was found to be extremely embrittled and contained numerous through-thickness cracks. Tensile testing indicated that the solar facing surface lost 60% of its mechanical strength and 90% of its elasticity while the anti-solar facing surface had ductility similar to pristine FEP. The solar absorptance of both the solar facing surface (0.155 plus or minus 0.032) and the anti-solar facing surface (0.208 plus or minus 0.012) were found to be greater than pristine Ag-FEP (0.074). Solar facing and anti-solar facing surfaces were microscopically textured, and locations of isolated contamination were present on the anti-solar surface resulting in increased localized texturing. Yet, the overall texture was significantly more pronounced on the solar facing surface indicating a synergistic effect of combined solar exposure and increased heating with atomic oxygen erosion. The results indicate a very strong dependence of degradation, particularly embrittlement, upon solar exposure with orbital thermal cycling having a significant effect.

  20. Suppression of Astronomical Sources Using Starshades and the McMath-Pierce Solar Telescope

    NASA Astrophysics Data System (ADS)

    Novicki, Megan; Warwick, Steve; Smith, Daniel; Richards, Michael; Harness, Anthony

    2016-01-01

    The external starshade is a method for the direct detection and spectral characterization of terrestrial planets around other stars, a key goal identified in ASTRO2010. Tests of this approach have been and continue to be conducted in the lab and in the field (Samuele et al., 2010, Glassman et al., 2014) using non-collimated light sources with a spherical wavefront. We extend the current approach to performing night-time observations of astronomical objects using small-scale (approximately 1/300th) starshades and the McMath-Pierce Solar Telescope at Kitt Peak National Observatory. We placed a starshade directly in the path of the beam from an astronomical object in front of the main heliostat. Using only flat mirrors, we then directed the light through the observatory path and reflected it off the West heliostat to an external telescope located approximately 270m away, for an effective baseline of 420m.This configuration allowed us to make measurements of flat wavefront sources with a Fresnel number close to those expected in proposed full-scale space configurations. We present the results of our engineering runs conducted in 2015.

  1. Software control of the Advanced Technology Solar Telescope enclosure PLC hardware using COTS software

    NASA Astrophysics Data System (ADS)

    Borrowman, Alastair J.; de Bilbao, Lander; Ariño, Javier; Murga, Gaizka; Goodrich, Bret; Hubbard, John R.; Greer, Alan; Mayer, Chris; Taylor, Philip

    2012-09-01

    As PLCs evolve from simple logic controllers into more capable Programmable Automation Controllers (PACs), observatories are increasingly using such devices to control complex mechanisms1, 2. This paper describes use of COTS software to control such hardware using the Advanced Technology Solar Telescope (ATST) Common Services Framework (CSF). We present the Enclosure Control System (ECS) under development in Spain and the UK. The paper details selection of the commercial PLC communication library PLCIO. Implemented in C and delivered with source code, the library separates the programmer from communication details through a simple API. Capable of communicating with many types of PLCs (including Allen-Bradley and Siemens) the API remains the same irrespective of PLC in use. The ECS is implemented in Java using the observatory's framework that provides common services for software components. We present a design following a connection-based approach where all components access the PLC through a single connection class. The link between Java and PLCIO C library is provided by a thin Java Native Interface (JNI) layer. Also presented is a software simulator of the PLC based upon the PLCIO Virtual PLC. This creates a simulator operating below the library's API and thus requires no change to ECS software. It also provides enhanced software testing capabilities prior to hardware becoming available. Results are presented in the form of communication timing test data, showing that the use of CSF, JNI and PLCIO provide a control system capable of controlling enclosure tracking mechanisms, that would be equally valid for telescope mount control.

  2. Optical design of a near-infrared imaging spectropolarimeter for the Advanced Technology Solar Telescope

    NASA Astrophysics Data System (ADS)

    Greco, Vincenzo; Cavallini, Fabio

    2013-06-01

    In designing the optics of an imaging multi-etalon spectropolarimeter as a post-focus instrument for the Advanced Technology Solar Telescope (ATST), many constraints must be considered. Among these are the large entrance pupil diameter of the telescope (4 m), the demanded large field of view (≥90 arc sec), high spectral resolving power (≥200,000), and limited field-dependent blue-shift of the instrumental profile [≤3 full width at half maximum (FWHM)], which require Fabry-Perot interferometers of large diameter (≥200 mm), lighted by highly collimated beams. This implies large optical elements and long optical paths. Moreover, to use interference pre-filters with a relatively small diameter (≤70 mm) and placed between the interferometers to reduce the inter-reflections in axial-mount, a "pupil adapter" must be included with a further increase of the optical path length. Although a multi-etalon spectropolarimeter works in quasi-monochromatic light, the Fraunhofer lines of interest cover a wide range of wavelengths (850 to 1650 nm), which demands a good chromatic aberration control. A low instrumental polarization (≤0.5%) is also required to allow a high polarimetric precision. Finally, some secondary optical paths are required to perform the initial instrumental setup and to secure the best instrumental performances. A diffraction-limited optical solution for ATST is described that fulfills all the above requirements in a relative small volume.

  3. Co-Alignment System (CAS) study. Report on task 1-3. [Solar Extreme Ultraviolet Telescope and Spectrometer pointing system

    NASA Technical Reports Server (NTRS)

    Anderson, N. T.

    1980-01-01

    The design of a suitable coalignment system (CAS) for the Solar Extreme Ultraviolet Telescope and Spectrometer (SEUTS) is presented. The CAS provides offset adjustment capabilities to SEUTS which will be mounted on a single large pointing system with other devices. The suitability of existing designs is determined and modifications are suggested.

  4. TURBULENT CHARACTERISTICS IN THE INTENSITY FLUCTUATIONS OF A SOLAR QUIESCENT PROMINENCE OBSERVED BY THE HINODE SOLAR OPTICAL TELESCOPE

    SciTech Connect

    Leonardis, E.; Chapman, S. C.; Foullon, C.

    2012-02-01

    We focus on Hinode Solar Optical Telescope (SOT) calcium II H-line observations of a solar quiescent prominence (QP) that exhibits highly variable dynamics suggestive of turbulence. These images capture a sufficient range of scales spatially ({approx}0.1-100 arcsec) and temporally ({approx}16.8 s-4.5 hr) to allow the application of statistical methods used to quantify finite range fluid turbulence. We present the first such application of these techniques to the spatial intensity field of a long-lived solar prominence. Fully evolved inertial range turbulence in an infinite medium exhibits multifractal scale invariance in the statistics of its fluctuations, seen as power-law power spectra and as scaling of the higher order moments (structure functions) of fluctuations which have non-Gaussian statistics; fluctuations {delta}I(r, L) = I(r + L) - I(r) on length scale L along a given direction in observed spatial field I have moments that scale as ({delta}I(r, L){sup p}) {approx} L{sup {zeta}(p)}. For turbulence in a system that is of finite size, or that is not fully developed, one anticipates a generalized scale invariance or extended self-similarity (ESS) ({delta}I(r, L){sup p}) {approx} G(L){sup {zeta}(p)}. For these QP intensity measurements we find scaling in the power spectra and ESS. We find that the fluctuation statistics are non-Gaussian and we use ESS to obtain ratios of the scaling exponents {zeta}(p): these are consistent with a multifractal field and show distinct values for directions longitudinal and transverse to the bulk (driving) flow. Thus, the intensity fluctuations of the QP exhibit statistical properties consistent with an underlying turbulent flow.

  5. Hubble Space telescope thermal cycle test report for large solar array samples with BSFR cells (Sample numbers 703 and 704)

    NASA Technical Reports Server (NTRS)

    Alexander, D. W.

    1992-01-01

    The Hubble space telescope (HST) solar array was designed to meet specific output power requirements after 2 years in low-Earth orbit, and to remain operational for 5 years. The array, therefore, had to withstand 30,000 thermal cycles between approximately +100 and -100 C. The ability of the array to meet this requirement was evaluated by thermal cycle testing, in vacuum, two 128-cell solar cell modules that exactly duplicated the flight HST solar array design. Also, the ability of the flight array to survive an emergency deployment during the dark (cold) portion of an orbit was evaluated by performing a cold-roll test using one module.

  6. Vibration measurements of the Daniel K. Inouye Solar Telescope mount, Coudé rotator, and enclosure assemblies

    NASA Astrophysics Data System (ADS)

    McBride, William R.; McBride, Daniel R.

    2016-08-01

    The Daniel K. Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, with a 4-meter off-axis primary mirror and 16 meter rotating Coudé laboratory within the telescope pier. The off-axis design requires a mount similar to an 8-meter on-axis telescope. Both the telescope mount and the Coudé laboratory utilize a roller bearing technology in place of the more commonly used hydrostatic bearings. The telescope enclosure utilizes a crawler mechanism for the altitude axis. As these mechanisms have not previously been used in a telescope, understanding the vibration characteristics and the potential impact on the telescope image is important. This paper presents the methodology used to perform jitter measurements of the enclosure and the mount bearings and servo system in a high-noise environment utilizing seismic accelerometers and high dynamic-range data acquisition equipment, along with digital signal processing (DSP) techniques. Data acquisition and signal processing were implemented in MATLAB. In the factory acceptance testing of the telescope mount, multiple accelerometers were strategically located to capture the six axes-of-motion of the primary and secondary mirror dummies. The optical sensitivity analysis was used to map these mirror mount displacements and rotations into units of image motion on the focal plane. Similarly, tests were done with the Coudé rotator, treating the entire rotating instrument lab as a rigid body. Testing was performed by recording accelerometer data while the telescope control system performed tracking operations typical of various observing scenarios. The analysis of the accelerometer data utilized noise-averaging fast Fourier transform (FFT) routines, spectrograms, and periodograms. To achieve adequate dynamic range at frequencies as low as 3Hz, the use of special filters and advanced windowing functions were necessary. Numerous identical automated tests were compared to identify and select the data sets

  7. PET - A proton/electron telescope for studies of magnetospheric, solar, and galactic particles

    NASA Technical Reports Server (NTRS)

    Cook, Walter R.; Cummings, Alan C.; Cummings, Jay R.; Garrard, Thomas L.; Kecman, Branislav; Mewaldt, Richard A.; Selesnick, Richard S.; Stone, Edward C.; Baker, Daniel N.; Von Rosenvinge, Tycho T.

    1993-01-01

    The Proton/Electron Telescope (PET) on SAMPEX is designed to provide measurements of energetic electrons and light nuclei from solar, galactic, and magnetospheric sources. PET is an all solid-state system that will measure the differential energy spectra of electrons from about 1 to about 30 MeV and H and He nuclei from about 20 to about 300 MeV/nuc, with isotope resolution of H and He extending from about 20 to about 80 MeV/nuc. As SAMPEX scans all local times and geomagnetic cutoffs over the course of its near-polar orbit, PET will characterize precipitating relativistic electron events during periods of declining solar activity, and it will examine whether the production rate of odd nitrogen and hydrogen molecules in the middle atmosphere by precipitating electrons is sufficient to affect O3 depletion. In addition, PET will complement studies of the elemental and isotopic composition of energetic heavy (Z greater than 2) nuclei on SAMPEX by providing measurements of H, He, and electrons. Finally, PET has limited capability to identify energetic positrons from potential natural and man-made sources.

  8. Cryogenic near infrared spectropolarimeter for the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Fehlmann, Andre; Giebink, Cynthia; Kuhn, Jeffrey R.; Messersmith, Ernesto J.; Mickey, Donald L.; Scholl, Isabelle F.; James, Don; Hnat, Kirby; Schickling, Greg; Schickling, Richard

    2016-08-01

    The Cryogenic Near Infrared Spectropolarimeter for the Daniel K Inouye Solar Telescope is designed to measure polarized light from 0.5 to 5 μm. It uses an almost all reflective design for high throughput and an R2 echelle grating to achieve the required resolution of up to R = 100,000. The optics cooled to cryogenic temperatures reduce the thermal background allowing for IR observations of the faint solar corona. Both the spectrograph and its context imager use H2RG detector arrays with a newly designed controller to allow synchronized exposures at frame rates up to 10 Hz. All hardware has been built and tested and the key components met their design goals. 1) The cryogenic system uses mechanical closed cycle coolers which introduce vibrations. Our design uses a two stage approach with a floating mounting disk and flexible cold links to reduce these. The vibration amplitudes on all critical stages were measured and are smaller than 1μm. 2) The grating stage of the spectrograph uses a double stack of harmonic drives and an optical encoder to provide sub-arcsecond resolution and a measured repeatability of better than 0.5 arcsec.

  9. Non-uniform Solar Temperature Field on Large Aperture, Fully-Steerable Telescope Structure

    NASA Astrophysics Data System (ADS)

    Liu, Yan

    2016-09-01

    In this study, a 110-m fully steerable radio telescope was used as an analysis platform and the integral parametric finite element model of the antenna structure was built in the ANSYS thermal analysis module. The boundary conditions of periodic air temperature, solar radiation, long-wave radiation shadows of the surrounding environment, etc. were computed at 30 min intervals under a cloudless sky on a summer day, i.e., worstcase climate conditions. The transient structural temperatures were then analyzed under a period of several days of sunshine with a rational initial structural temperature distribution until the whole set of structural temperatures converged to the results obtained the day before. The non-uniform temperature field distribution of the entire structure and the main reflector surface RMS were acquired according to changes in pitch and azimuth angle over the observation period. Variations in the solar cooker effect over time and spatial distributions in the secondary reflector were observed to elucidate the mechanism of the effect. The results presented here not only provide valuable realtime data for the design, construction, sensor arrangement and thermal deformation control of actuators but also provide a troubleshooting reference for existing actuators.

  10. Multi-spectral solar telescope array IV; The soft x-ray and extreme ultraviolet filters

    SciTech Connect

    Lindblom, J.F.; O'Neal, R.H.; Walker, A.B.C. Jr. ); Powell, F.R. ); Barbee, T.W. Jr. ); Hoover, R.B. ); Powell, S.F. )

    1991-08-01

    The multilayer mirrors used in the normal-incidence optical systems of the Multi-Spectral Solar Telescope Array (MSSTA) are efficient reflectors for soft x-ray/extreme ultraviolet (EUV) radiation at wavelengths that satisfy the Bragg condition, thus allowing a narrow band of the soft x-ray/EUV spectrum to be isolated. However, these same mirrors are also excellent reflectors in the visible, ultraviolet, and far-ultraviolet (FUV) part of the spectrum, where normal incidence reflectivities can exceed 50%. Furthermore, the sun emits far more radiation in the ultraviolet and visible part of the spectrum than it does in the soft x-ray/EUV. For this reason, thin foil filters are employed to eliminate the unwanted longer wavelength solar emission. The MSSTA instrument uses various combinations of thin foil filters composed of aluminum carbon, tellurium, potassium bromide, beryllium, molybdenum, rhodium, and phthalocyanine to achieve the desired radiation rejection characteristics. In this paper, the authors discuss issues concerning the design, manufacture, and predicted performance of MSSTA filters.

  11. PET: a proton/electron telescope for studies of magnetospheric, solar, and galactic particles

    SciTech Connect

    Cook, W.R.; Cummings, A.C.; Cummings, J.R.; Garrard, T.L.; Kecman, B.; Mewaldt, R.A.; Selesnick, R.S.; Stone, E.C. ); Baker, D.N.; Rosenvinge, T.T. von ); Callis, L.B. ); Blake, J.B.

    1993-05-01

    The Proton/Electron Telescope (PET) on SAMPEX is designed to provide measurements of energetic electrons and light nuclei from solar, galactic, and magnetospheric sources. PET is an all solid-state system that will measure the differential energy spectra of electrons from [approximately]1 to [approximately]30 MeV and H and He nuclei from [approximately]20 to [approximately]300 MeV/nuc, with isotope resolution of H and He extending from [approximately]20 to [approximately]80 MeV/nuc. As SAMPEX scans all local times and geomagnetic cutoffs over the course of its near-polar orbit, PET will characterize precipitating relativistic electron events during periods of declining solar activity, and it will examine whether the production rate of odd nitrogen and hydrogen molecules in the middle atmosphere by precipitating electrons is sufficient to affect O[sub 3] depletion. In addition, PET will complement studies of the elemental and isotopic composition of energetic heavy (Z > 2) nuclei on SAMPEX by providing measurements of H, He, and electrons. Finally, PET has limited capability to identify energetic positrons from potential natural and man-made sources.

  12. First Results of Coordinated Observations from IRIS and New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Kosovichev, A. G.; Cao, W.; Goode, P. R.; Gorceix, N.; Kleint, L.; Plymate, C.; Varsik, J. R.; Shumko, S.; Yurchyshyn, V.

    2013-12-01

    Most of the chromospheric structuring and dynamics is controlled by the underlying photospheric processes, associated with turbulent magnetoconvection, ubiquitous magnetic flux emergence, small-scale eruptions and acoustic events. The 1.6 m New Solar Telescope (NST) of Big Bear Solar Observatory offers a substantial improvement in ground-based high-resolution capabilities, and provides important support for the IRIS mission. The primary goal of the coordinated IRIS-NST observations is to obtain complementary data for investigations of photosphere-chromosphere links and drivers of the chromospheric dynamics. The coordinated NST observations are performed using the second-generation adaptive optics system AO-308, and three instruments: Broadband Filter Imagers (G-band and TiO), Visible Imaging Spectrometer (H-alpha), and Near InfraRed Imaging Spectropolarimeter (NIRIS). NIRIS provides high-cadence data in Fe I 1565 nm doublet which is the most Zeeman sensitive probe of magnetic fields in the deep photosphere, and in the He I 1083 nm multiplet for diagnostics of the upper chromosphere. We present initial results of the coordinated observations, and discuss properties of small-scale ejections in fibril magnetic structures, obtained from analysis of IRIS and NST data.

  13. Progress on the 1.8m solar telescope: the CLST

    NASA Astrophysics Data System (ADS)

    Rao, Changhui; Gu, Naiting; Zhu, Lei; Li, Cheng; Huang, Jinglong; Cheng, Yuntao; Liu, Yangyi; Yao, Benxi; Wang, Zhiyong; Cao, Xuedong; Zhang, Ming; Zhang, Lanqiang; Liu, Hong; Wan, Yongjian; Xian, Hao; Ma, Wenli

    2016-07-01

    In order to study some special solar activities, such as the emergence, evolution and disappearance progress of the sunspot and magnetic flux, and the key role of magnetic field, a new 1.8-meter size high-resolution solar telescope —the CLST will be built in the Institute of Optics and Electronics(IOE), Chinese Academy of Science(CAS), which locates in Chengdu, China. The CLST has a classic Gregorian configuration, alt-azimuth mount, retractable dome. Besides that, a large mechanical de-rotator will be used to cancel the image rotation, and finally it will cooperate with another kind of mechanical de-rotator to cancel both of the pupil rotation and image rotation. Φ3 arc-minute field of view will help the CLST to observe the whole solar activity region, and if necessary the FOV can be enlarged to Φ 6 arc-minute. A 1.8m primary mirror with honeycomb sandwiches structure made by using ULE material will reduce about 70% of weight. Thermal controlling system will also be equipped for the CLST, which including Heat-Stop, primary mirror, tube truss, mount and the other optics elements. An experimental system for validating thermal controlling of primary mirror and Heat-Stop has been built, and the temperature tracking results will be illustrated in this paper. Currently, we have finished the detailed design of the CLST, and some important components also have been manufactured and finished. In this paper, we describe some important progresses and the latest status of the CLST project during these two years.

  14. Ultra-Narrow Negative Flare Front Observed in Helium-10830 Å Using the1.6m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Cao, Wenda; Ding, Mingde; Kleint, Lucia; Su, Jiangtao; Liu, Chang; Ji, Haisheng; Chae, Jongchul; Jing, Ju; Cho, Kyuhyoun; Cho, Kyung-Suk; Gary, Dale E.; Wang, Haimin

    2016-05-01

    Solar flares are sudden flashes of brightness on the Sun and are often associated with coronal mass ejections and solar energetic particles that have adverse effects on the near-Earth environment. By definition, flares are usually referred to as bright features resulting from excess emission. Using the newly commissioned 1.6-m New Solar Telescope at Big Bear Solar Observatory, we show a striking “negative” flare with a narrow but unambiguous “dark” moving front observed in He I 10830 Å, which is as narrow as 340 km and is associated with distinct spectral characteristics in Hα and Mg II lines. Theoretically, such negative contrast in He I 10830 Å can be produced under special circumstances by nonthermal electron collisions or photoionization followed by recombination. Our discovery, made possible due to unprecedented spatial resolution, confirms the presence of the required plasma conditions and provides unique information in understanding the energy release and radiative transfer in solar flares.

  15. The 2012 status of the MCAO testbed for the GREGOR solar telescope

    NASA Astrophysics Data System (ADS)

    Schmidt, Dirk; Berkefeld, Thomas; Heidecke, Frank

    2012-07-01

    We look back on two years of experience with the laboratory MCAO testbed for the GREGOR solar telescope. GREGOR’s MCAO features four adaptive mirrors, i. e. one tip-tilt mirror, and three DMs to compensate for turbulence around 0 km, 5 km, and 15.5 km above ground. Two different Hartmann-Shack wavefront sensor units are used for wavefront tomography. A sensor with a narrow field of view and smaller subapertures is dedicated to high-order aberrations on the optical axis. This sensor directly follows the pupil plane DM and does not see the high-altitude DMs. The second sensor features larger subapertures and 19 guide regions spread over a wide field of view for off-axis wavefront sensing. We show that high-altitude DMs cause rapidly changing pupil distortions and thus misregistration, which renders the interaction of a pupil-plane DM and a subsequent wavefront sensor non-linear. We rewrote the control software for cleaner and more flexible code, and we switched to modal wavefront reconstruction from direct reconstruction. The original digital interfacing of the DMs high-voltage electronics didn’t prove to be reliable. Thus, we developed a new interface board that is based on CameraLink/ChannelLink technology to transmit the DM commands from the control computer. In this paper we present the innovations and some of the first experimental performance measurements with two DMs. One DM failed before scientific grade data was recorded with three DMs. This DM will be replaced soon. We conclude that GREGOR’s MCAO system is now ready for first on-sky tests at the telescope.

  16. Fine Structures and Kinematics of an Intriguing Chromospheric Jet Observed by Hinode Solar Optical Telescope

    NASA Astrophysics Data System (ADS)

    Liu, W.; Berger, T. E.; Title, A. M.; Tarbell, T. D.

    2009-12-01

    Transient, small-scale ejections of plasma from the lower atmosphere are common manifestations of solar activity. Hinode, with its superior resolutions, has spurred renewed interest in solar jets since its launch. Here we report a chromospheric jet lasting for more than 1 hr on 2007 February 9 observed by the Hinode Solar Optical Telescope (SOT) in unprecedented detail. SOT Ca II H passband observations at high resolution of 0.2 arcsecond and cadence of 8 s allowed us to investigate the fine structures and kinematics of the jet. The ejection occurred in three episodes, rather than continuously, with the amount and velocity of material decreasing with time. The upward velocities along the jet range from ~440 to ~30 km/s, while the downward velocities of the material falling back have much smaller values (mean: -60 km/s) and a narrower distribution. Some tracks in the space-time plot clearly show parabolic shapes and the inferred acceleration is a fraction of the solar gravitational acceleration. The jet consists of fine threads (0.5-2 arcsecond wide), which exhibit coherent, oscillatory transverse motions perpendicular to the jet axis and about a common equilibrium position. These motions propagate upward, with the maximum phase speed of ~740 km/s found at the leading front of the jet. The transverse oscillation velocities range from 150 to 30 km/s, amplitudes from 6 to 2 Mm, and periods from 250 to 550 s. The oscillations slow down with time and cease when the material starts to fall back. The falling material travels along almost straight lines in the original direction of ascent, showing no transverse motions. These observations are consistent with the models suggested by Shibata & Uchida (1985) and Canfield et al. (1996). In this scenario, the jet involves untwisting helical threads, which rotate about the axis of a single large cylinder and shed magnetic helicity into the upper atmosphere. Implications of this event in the context of multiwavelength data in H

  17. Impacts on Hubble Space Telescope solar arrays: Discrimination between natural and man-made particles

    NASA Astrophysics Data System (ADS)

    Kearsley, A. T.; Drolshagen, G.; McDonnell, J. A. M.; Mandeville, J.-C.; Moussi, A.

    A Post-Flight Investigation was initiated by the European Space Agency to analyze impacts on solar arrays of the Hubble Space Telescope (HST), exposed to space for 8.25 years at approximately 600 km altitude. The solar cells deployed during the first Service Mission (SM-1 in December 1993) were retrieved in March 2002 as part of Service Mission 3B (SM-3B). A sub-panel of 2 m 2 was cut from the arrays for subsequent selection and removal of individual solar cells for analysis. Six cells (4.8 × 10 -3 m 2) were surveyed for flux of all craters of sizes greater than 5 microns. Analytical scanning electron microscopy was used to analyse residues in 111 features of 3-4000 micron conchoidal detachment diameter ( Dco), examined on 23 solar cells. Eighty three show identifiable residue: 38 are Space Debris impacts and 45 Micrometeoroid impacts. Of the remaining 28, 2 contain residue of ambiguous origin, 1 is probably a minor manufacturing flaw, 1 is obscured by contamination, and 24 are unresolved, lacking recognizable residue. The majority of space debris impacts on the SM-3B cells are less than 80 microns Dco, dominated by Al-rich residue, probably of solid rocket motor origin, although three may be due to sodium metal droplet impacts. Three larger features include paint pigment and binder, ferrous alloy, and possible carbon-fibre composite material debris. Micrometeoroid residues are found across the entire crater size range and dominate features of between 100 and 1000 microns, their residues are similar to those found in earlier SM-1 surveys. Fe- and Mg-rich silicates dominate; Fe sulphides are common and there are occasional vesicular Ni- and S-bearing mafic silicates of hydrous phyllosilicate origin. A single sodium aluminosilicate residue and one Fe Ni metal residue were found; as well as enigmatic Mg- and S-bearing residues, all considered as probably of micrometeoroid origin. A few Fe-, O- and C-bearing residues were classified as of ambiguous origin.

  18. UPDATED ANALYSIS OF THE UPWIND INTERPLANETARY HYDROGEN VELOCITY AS OBSERVED BY THE HUBBLE SPACE TELESCOPE DURING SOLAR CYCLE 23

    SciTech Connect

    Vincent, Frederic E.; Ben-Jaffel, Lotfi; Harris, Walter M.

    2011-09-10

    The interplanetary hydrogen (IPH), a population of neutrals that fill the space between planets inside the heliosphere, carries the signature of the interstellar medium (ISM) and the heliospheric interface. As the incoming ISM-ionized component deflects at the heliopause, charge exchange reactions decelerate the bulk motion of the neutrals that penetrate the heliosphere. Inside the heliosphere, the IPH bulk velocity is further affected by solar gravity, radiation pressure, and ionization processes, with the latter two processes dependent on solar activity. Solar cycle 23 provided the first partial temporal map of the IPH velocity, including measurements from the Hubble Space Telescope (HST) spectrometers (Goddard High Resolution Spectrograph (GHRS) and Space Telescope Imaging Spectrograph (STIS)) and the Solar and Heliospheric Observatory/Solar Wind ANisotropies (SWAN) instrument. We present an updated analysis of IPH velocity measurements from GHRS and STIS and compare these results with those of SWAN and two different time-dependent models. Our reanalysis of STIS data reveals a significant change in IPH velocity relative to earlier reports, because of the contamination by geocoronal oxygen that was not accounted for. While current models of the heliospheric interface predict the observed IPH velocity for solar maximum, they are not consistent with data covering solar minimum. With updates to the HST data points, we now find that all data can be fit by the existing models to within 1{sigma}, with the exception of SWAN observations taken at solar minimum (1997/1998). We conclude that the current data lack the temporal coverage and/or precision necessary to determine the detailed characteristics of the solar cycle dependence. Hence, new observations are merited.

  19. Dynamics in Sunspot Umbra as Seen in New Solar Telescope and Interface Region Imaging Spectrograph Data

    NASA Astrophysics Data System (ADS)

    Yurchyshyn, V.; Abramenko, V.; Kilcik, A.

    2015-01-01

    We analyze sunspot oscillations using Interface Region Imaging Spectrograph (IRIS) slit-jaw and spectral data and narrow-band chromospheric images from the New Solar Telescope (NST) for the main sunspot in NOAA AR 11836. We report that the difference between the shock arrival times as measured by the Mg II k 2796.35 Å and Si IV 1393.76 Å line formation levels changes during the observed period, and peak-to-peak delays may range from 40 s to zero. The intensity of chromospheric shocks also displays long-term (about 20 min) variations. NST's high spatial resolution Hα data allowed us to conclude that, in this sunspot, umbral flashes (UFs) appeared in the form of narrow bright lanes stretched along the light bridges and around clusters of umbral bright points. The time series also suggested that UFs preferred to appear on the sunspot-center side of light bridges, which may indicate the existence of a compact sub-photospheric driver of sunspot oscillations. The sunspot's umbra as seen in the IRIS chromospheric and transition region data appears bright above the locations of light bridges and the areas where the dark umbra is dotted with clusters of umbral dots. Co-spatial and co-temporal data from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory showed that the same locations were associated with bright footpoints of coronal loops suggesting that the light bridges may play an important role in heating the coronal sunspot loops. Finally, the power spectra analysis showed that the intensity of chromospheric and transition region oscillations significantly vary across the umbra and with height, suggesting that umbral non-uniformities and the structure of sunspot magnetic fields may play a role in wave propagation and heating of umbral loops.

  20. DYNAMICS IN SUNSPOT UMBRA AS SEEN IN NEW SOLAR TELESCOPE AND INTERFACE REGION IMAGING SPECTROGRAPH DATA

    SciTech Connect

    Yurchyshyn, V.; Abramenko, V.; Kilcik, A.

    2015-01-10

    We analyze sunspot oscillations using Interface Region Imaging Spectrograph (IRIS) slit-jaw and spectral data and narrow-band chromospheric images from the New Solar Telescope (NST) for the main sunspot in NOAA AR 11836. We report that the difference between the shock arrival times as measured by the Mg II k 2796.35 Å and Si IV 1393.76 Å line formation levels changes during the observed period, and peak-to-peak delays may range from 40 s to zero. The intensity of chromospheric shocks also displays long-term (about 20 min) variations. NST's high spatial resolution Hα data allowed us to conclude that, in this sunspot, umbral flashes (UFs) appeared in the form of narrow bright lanes stretched along the light bridges and around clusters of umbral bright points. The time series also suggested that UFs preferred to appear on the sunspot-center side of light bridges, which may indicate the existence of a compact sub-photospheric driver of sunspot oscillations. The sunspot's umbra as seen in the IRIS chromospheric and transition region data appears bright above the locations of light bridges and the areas where the dark umbra is dotted with clusters of umbral dots. Co-spatial and co-temporal data from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory showed that the same locations were associated with bright footpoints of coronal loops suggesting that the light bridges may play an important role in heating the coronal sunspot loops. Finally, the power spectra analysis showed that the intensity of chromospheric and transition region oscillations significantly vary across the umbra and with height, suggesting that umbral non-uniformities and the structure of sunspot magnetic fields may play a role in wave propagation and heating of umbral loops.

  1. Analysis of Flows inside Quiescent Prominences as Captured by Hinode/Solar Optical Telescope

    NASA Astrophysics Data System (ADS)

    Freed, M. S.; McKenzie, D. E.; Longcope, D. W.; Wilburn, M.

    2016-02-01

    Developing an understanding of how magnetic fields can become entangled in a prominence is important for predicting a possible eruption. This work investigates the kinetic energy and vorticity associated with plasma motion residing inside quiescent prominences (QPs). These plasma flow characteristics can be utilized to improve our understanding of how the prominence maintains a stable magnetic field configuration. Three different contrast-enhanced solar prominence observations from Hinode/Solar Optical Telescope were used to construct velocity maps—in the plane of the sky—via a Fourier local correlation tracking program. The resulting velocities were then used to perform the first-ever analysis of the two-dimensional kinetic energy and enstrophy spectra of a prominence. Enstrophy is introduced here as a means of quantifying the vorticity that has been observed in many QPs. The kinetic energy power spectral density (PSD) produced indices ranging from -1.00 to -1.60. There was a consistent anisotropy in the kinetic energy spectrum of all three prominences examined. Examination of the intensity PSD reveals that a different scaling relationship exists between the observed prominence structure and velocity maps. All of the prominences exhibited an inertial range of at least 0.8≤slant k≤slant 2.0 {rads} {{Mm}}-1. Quasi-periodic oscillations were also detected in the centroid of the velocity distributions for one prominence. Additionally, a lower limit was placed on the kinetic energy density (ɛ ˜ 0.22-7.04 {{km}}2 {{{s}}}-2) and enstrophy density (ω ˜ 1.43-13.69 × \\quad {10}-16 {{{s}}}-2) associated with each prominence.

  2. Telescopes and recording systems used by amateurs for studying planets in our solar system - an overview

    NASA Astrophysics Data System (ADS)

    Kowollik, S.; Gaehrken, B.; Fiedler, M.; Gerstheimer, R.; Sohl, F.; Koschny, D.

    2008-09-01

    During the last couple of years, engaged amateur astronomers have benefited by the rapid development in the field of commercial CCD cameras, video techniques, and the availability of mirror telescopes with high quality. Until recently, such technical equipment and the related handling experience had been reserved to research institutes. This contribution presents the potential capabilities of amateur astronomers and describes the approach to the production of data. The quality of the used telescopes is described with respect to aperture and resolving power; as well as the quantum efficiency of the used sensitive b/w CCD cameras with respect to the detectable wavelength. Beyond these facts the necessary exposure times for CCD images using special filters are discussed. Today's amateur astronomers are able to image the bodies of the solar system in the wavelength range between 340 and 1050 nm [1], [2], [3], [4]. This covers a wide range of the spectrum which is investigated with cameras on board of space telescopes or planetary probes. While space probes usually obtain high-resolution images of individual Surface or atmospheric features of the planets, the images of amateur astronomers show the entire surface of the observed planet. Both datasets together permit a more comprehensive analysis of the data aquired in each case. The "Venus Amateur Observing Project" of the European Space Agency [5] is a first step into a successful co-operation between amateur astronomers and planetary scientists. Individual CCD images captured through the turbulent atmosphere of the Earth usually show characteristic distortions of the arriving wave fronts. If one captures hundreds or thousands of images on a video stream in very short time, there will be always also undistorted images within the data. Computer programmes are available to identify and retrieve these undistorted images and store them for further processing [7]. This method is called "Lucky Imaging" and it allows to

  3. Development of a correlation tracker system for the New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Choi, Seonghwan; Nah, Jakyoung; Moon, Yong-Jae; Wang, Haimin; Coulter, Roy

    2008-07-01

    In this paper, we report on the development of a correlation tracker system for the New Solar Telescope (NST). It consists of three sub-systems: a tip-tilt mirror unit, a camera unit, and a control unit. Its software has been developed via Microsoft Visual C++, which enables us to take images from the high-speed CMOS camera in order to measure the image motions induced by atmospheric turbulence by using SAD algorithm and 2-D FFT cross-correlation, and to control the high-dynamics Piezo tip-tilt mirror for tip-tilt correction. We adopted the SIMD technology and parallel programming technology based on the Intel Core 2 Quad processor without any additional processing system (FPGA or DSP) for high-speed performance. As a result, we can make a tip-tilt correction with about seven hundreds of Hz in a closed loop mode. The prototype system has been successfully developed in a laboratory and will be installed on the NST.

  4. Opto-thermal analysis of a lightweighted mirror for solar telescope.

    PubMed

    Banyal, Ravinder K; Ravindra, B; Chatterjee, S

    2013-03-25

    In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative heating and energy exchange of the mirror with surroundings. The numerical simulations show the non-uniform temperature distribution and associated thermo-elastic distortions of the mirror blank clearly mimicking the underlying discrete geometry of the lightweighted substrate. The computed mechanical deformation data is analyzed with surface polynomials and the optical quality of the mirror is evaluated with the help of a ray-tracing software. The thermal print-through distortions are further shown to contribute to optical figure changes and mid-spatial frequency errors of the mirror surface. A comparative study presented for three commonly used substrate materials, namely, Zerodur, Pyrex and Silicon Carbide (SiC) is relevant to vast area of large optics requirements in ground and space applications.

  5. Plate coil thermal test bench for the Daniel K. Inouye Solar Telescope (DKIST) carousel cooling system

    NASA Astrophysics Data System (ADS)

    Phelps, LeEllen; Murga, Gaizka; Montijo, Guillermo; Hauth, David

    2014-08-01

    Analyses have shown that even a white-painted enclosure requires active exterior skin-cooling systems to mitigate dome seeing which is driven by thermal nonuniformities that change the refractive index of the air. For the Daniel K. Inouye Solar Telescope (DKIST) Enclosure, this active surface temperature control will take the form of a system of water cooled plate coils integrated into the enclosure cladding system. The main objective of this system is to maintain the surface temperature of the enclosure as close as possible to, but always below, local ambient temperature in order to mitigate this effect. The results of analyses using a multi-layer cladding temperature model were applied to predict the behavior of the plate coil cladding system and ultimately, with safety margins incorporated into the resulting design thermal loads, the detailed designs. Construction drawings and specifications have been produced. Based on these designs and prior to procurement of the system components, a test system was constructed in order to measure actual system behavior. The data collected during seasonal test runs at the DKIST construction site on Haleakalā are used to validate and/or refine the design models and construction documents as appropriate. The test fixture was also used to compare competing hardware, software, components, control strategies, and configurations. This paper outlines the design, construction, test protocols, and results obtained of the plate coil thermal test bench for the DKIST carousel cooling system.

  6. MAGNETIC RECONNECTION BETWEEN SMALL-SCALE LOOPS OBSERVED WITH THE NEW VACUUM SOLAR TELESCOPE

    SciTech Connect

    Yang, Shuhong; Zhang, Jun; Xiang, Yongyuan

    2015-01-01

    Using the high tempo-spatial resolution Hα images observed with the New Vacuum Solar Telescope, we report solid observational evidence of magnetic reconnection between two sets of small-scale, anti-parallel loops with an X-shaped topology. The reconnection process contains two steps: a slow step with a duration of more than several tens of minutes, and a rapid step lasting for only about three minutes. During the slow reconnection, two sets of anti-parallel loops gradually reconnect, and new loops are formed and stacked together. During the rapid reconnection, the anti-parallel loops approach each other quickly, and then rapid reconnection takes place, resulting in the disappearance of the former loops. In the meantime, new loops are formed and separate. The region between the approaching loops is brightened, and the thickness and length of this region are determined to be about 420 km and 1.4 Mm, respectively. During the rapid reconnection process, obvious brightenings at the reconnection site and apparent material ejections outward along reconnected loops are observed. These observed signatures are consistent with predictions by reconnection models. We suggest that the successive slow reconnection changes the conditions around the reconnection site and triggers instabilities, thus leading to the rapid approach of the anti-parallel loops and resulting in the rapid reconnection.

  7. Witnessing magnetic twist with high-resolution observation from the 1.6-m New Solar Telescope

    PubMed Central

    Wang, Haimin; Cao, Wenda; Liu, Chang; Xu, Yan; Liu, Rui; Zeng, Zhicheng; Chae, Jongchul; Ji, Haisheng

    2015-01-01

    Magnetic flux ropes are highly twisted, current-carrying magnetic fields. They are crucial for the instability of plasma involved in solar eruptions, which may lead to adverse space weather effects. Here we present observations of a flaring using the highest resolution chromospheric images from the 1.6-m New Solar Telescope at Big Bear Solar Observatory, supplemented by a magnetic field extrapolation model. A set of loops initially appear to peel off from an overall inverse S-shaped flux bundle, and then develop into a multi-stranded twisted flux rope, producing a two-ribbon flare. We show evidence that the flux rope is embedded in sheared arcades and becomes unstable following the enhancement of its twists. The subsequent motion of the flux rope is confined due to the strong strapping effect of the overlying field. These results provide a first opportunity to witness the detailed structure and evolution of flux ropes in the low solar atmosphere. PMID:25919706

  8. Witnessing magnetic twist with high-resolution observation from the 1.6-m New Solar Telescope.

    PubMed

    Wang, Haimin; Cao, Wenda; Liu, Chang; Xu, Yan; Liu, Rui; Zeng, Zhicheng; Chae, Jongchul; Ji, Haisheng

    2015-04-28

    Magnetic flux ropes are highly twisted, current-carrying magnetic fields. They are crucial for the instability of plasma involved in solar eruptions, which may lead to adverse space weather effects. Here we present observations of a flaring using the highest resolution chromospheric images from the 1.6-m New Solar Telescope at Big Bear Solar Observatory, supplemented by a magnetic field extrapolation model. A set of loops initially appear to peel off from an overall inverse S-shaped flux bundle, and then develop into a multi-stranded twisted flux rope, producing a two-ribbon flare. We show evidence that the flux rope is embedded in sheared arcades and becomes unstable following the enhancement of its twists. The subsequent motion of the flux rope is confined due to the strong strapping effect of the overlying field. These results provide a first opportunity to witness the detailed structure and evolution of flux ropes in the low solar atmosphere.

  9. Ultra-narrow Negative Flare Front Observed in Helium-10830 Å Using the 1.6 m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Cao, Wenda; Ding, Mingde; Kleint, Lucia; Su, Jiangtao; Liu, Chang; Ji, Haisheng; Chae, Jongchul; Jing, Ju; Cho, Kyuhyoun; Cho, Kyungsuk; Gary, Dale; Wang, Haimin

    2016-03-01

    Solar flares are sudden flashes of brightness on the Sun and are often associated with coronal mass ejections and solar energetic particles that have adverse effects on the near-Earth environment. By definition, flares are usually referred to as bright features resulting from excess emission. Using the newly commissioned 1.6 m New Solar Telescope at Big Bear Solar Observatory, we show a striking “negative” flare with a narrow but unambiguous “dark” moving front observed in He i 10830 Å, which is as narrow as 340 km and is associated with distinct spectral characteristics in Hα and Mg ii lines. Theoretically, such negative contrast in He i 10830 Å can be produced under special circumstances by nonthermal electron collisions or photoionization followed by recombination. Our discovery, made possible due to unprecedented spatial resolution, confirms the presence of the required plasma conditions and provides unique information in understanding the energy release and radiative transfer in astronomical objects.

  10. Measurement of the point spread function and effective area of the Solar-A Soft X-ray Telescope mirror

    NASA Technical Reports Server (NTRS)

    Lemen, J. R.; Claflin, E. S.; Brown, W. A.; Bruner, M. E.; Catura, R. C.

    1989-01-01

    A grazing incidence solar X-ray telescope, Soft X-ray Telescope (SXT), will be flown on the Solar-A satellite in 1991. Measurements have been conducted to determine the focal length, Point Spread Function (PSF), and effective area of the SXT mirror. The measurements were made with pinholes, knife edges, a CCD, and a proportional counter. The results show the 1/r character of the PSF, and indicate a half power diameter of 4.9 arcsec and an effective area of 1.33 sq cm at 13.3 A (0.93 keV). The mirror was found to provide a high contrast image with very little X-ray scattering.

  11. Impacts on Hubble Space Telescope solar arrays: discrimination between natural and man-made particles.

    NASA Astrophysics Data System (ADS)

    Kearsley, A. T.; Drolshagen, G.; McDonnell, J. A. M.; Mandeville, J.-C.; Moussi, A.

    A Post-Flight Investigation was initiated by the European Space Agency to analyze impact fluxes on solar arrays of the Hubble Space Telescope (HST), exposed to space for 8.25 years at approximately 600 km altitude. The solar cells were deployed during servicing mission SM-1 (December 1993), and retrieved by shuttle orbiter Columbia in March 2002 (SM-3B). A sub-panel of 2 m2 was cut from the --V2 wing and cells were selected for in-depth analysis. Twelve cells (9.6x10-3 m2) were surveyed for flux of all craters of sizes greater than 5 microns Dco; six at the NHM, and six at ONERA. Cumulative flux plots reveal slightly greater abundance of very small craters than in a comparable survey of SM-1 cells. Analytical scanning electron microscopy was used to locate impact features and to analyse residues at the NHM. 103 features of 3 -- 4000 micron conchoidal detachment diameter (Dco) were located on a total of 17 solar cells. 78 features show identifiable residue: 36 are Space Debris impacts and 42 Micrometeoroid impacts. Of the remaining 25: 4 contain residue of ambiguous origin, 1 is a minor manufacturing flaw, 1 is obscured by contamination, and 19 are unresolved, lacking recognizable residue. Space debris impacts on the SM-3B cells are all less than 80 microns Dco, dominated by Al- rich residue, probably of solid rocket motor origin, some may be unburnt fuel. Three craters may be sodium metal droplet impacts. No residues from paint pigment, aluminium or ferrous alloys, or copper- and tin-bearing metal were found. All craters larger than 100 microns are of micrometeoroid origin, or unresolved. Most residues are magnesium-iron silicate or iron sulfide. A few craters show vesicular Mg, S, Fe and Ni residue. A single Fe Ni metal residue was found, as well as enigmatic Mg- and S-bearing residues, all considered of micrometeoroid origin. A few Fe-, O- and C-bearing residues were classified as of ambiguous origin. The quality and quantity of residue is clearly linked to the

  12. Repackaging and characterizing of a HgCdTe CMOS infrared camera for the New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Cao, Wenda; Coulter, Roy; Gorceix, Nicolas; Goode, Philip R.

    2010-07-01

    The 1.6-meter New Solar Telescope (NST) is currently the world's largest aperture solar telescope. The NST is newly built at Big Bear Solar Observatory (BBSO). Among other instruments, the NST is equipped with several focal plane instruments operating in the near infrared (NIR). In order to satisfy the diverse observational requirements of these scientific instruments, a 1024 × 1024 HgCdTe TCM8600 CMOS camera manufactured by Rockwell Scientific Company has been repackaged and upgraded at Infrared Laboratories Inc. A new ND-5 dewar was designed to house the TCM8600 array with a low background filter wheel, inverted operation and at least 12 hours of hold time between fills. The repackaged camera will be used for high-resolution NIR photometry at the NST Nasmyth focus on the telescope and high-precision NIR spectro-polarimetry in the NST Coudé Lab below. In March 2010, this repackaged camera was characterized in the Coudé Lab at BBSO. This paper presents the design of new dewar, the detailed process of repackaging and characterizing the camera, and a series of test results.

  13. Production of the 4.26 m ZERODUR mirror blank for the Advanced Technology Solar telescope (ATST)

    NASA Astrophysics Data System (ADS)

    Jedamzik, Ralf; Werner, Thomas; Westerhoff, Thomas

    2014-07-01

    The Daniel K. Inouye Solar Telescope (DKIST, formerly the Advanced Technology Solar Telescope, ATST) will be the most powerful solar telescope in the world. It is currently being built by the Association of Universities for Research in Astronomy (AURA) in a height of 3000 m above sea level on the mountain Haleakala of Maui, Hawaii. The primary mirror blank of diameter 4.26 m is made of the extremely low thermal expansion glass ceramic ZERODUR® of SCHOTT AG Advanced Optics. The DKIST primary mirror design is extremely challenging. With a mirror thickness of only 78 to 85 mm it is the smallest thickness ever machined on a mirror of 4.26 m in diameter. Additionally the glassy ZERODUR® casting is one of the largest in size ever produced for a 4 m class ZERODUR® mirror blank. The off axis aspherical mirror surface required sophisticated grinding procedures to achieve the specified geometrical tolerance. The small thickness of about 80 mm required special measures during processing, lifting and transport. Additionally acid etch treatment was applied to the convex back-surface and the conical shaped outer diameter surface to improve the strength of the blank. This paper reports on the challenging tasks and the achievements on the material property and dimensional specification parameter during the production of the 4.26 m ZERODUR® primary mirror blank for AURA.

  14. Daniel K. Inouye Solar Telescope: computational fluid dynamic analyses and evaluation of the air knife model

    NASA Astrophysics Data System (ADS)

    McQuillen, Isaac; Phelps, LeEllen; Warner, Mark; Hubbard, Robert

    2016-08-01

    Implementation of an air curtain at the thermal boundary between conditioned and ambient spaces allows for observation over wavelength ranges not practical when using optical glass as a window. The air knife model of the Daniel K. Inouye Solar Telescope (DKIST) project, a 4-meter solar observatory that will be built on Haleakalā, Hawai'i, deploys such an air curtain while also supplying ventilation through the ceiling of the coudé laboratory. The findings of computational fluid dynamics (CFD) analysis and subsequent changes to the air knife model are presented. Major design constraints include adherence to the Interface Control Document (ICD), separation of ambient and conditioned air, unidirectional outflow into the coudé laboratory, integration of a deployable glass window, and maintenance and accessibility requirements. Optimized design of the air knife successfully holds full 12 Pa backpressure under temperature gradients of up to 20°C while maintaining unidirectional outflow. This is a significant improvement upon the .25 Pa pressure differential that the initial configuration, tested by Linden and Phelps, indicated the curtain could hold. CFD post- processing, developed by Vogiatzis, is validated against interferometry results of initial air knife seeing evaluation, performed by Hubbard and Schoening. This is done by developing a CFD simulation of the initial experiment and using Vogiatzis' method to calculate error introduced along the optical path. Seeing error, for both temperature differentials tested in the initial experiment, match well with seeing results obtained from the CFD analysis and thus validate the post-processing model. Application of this model to the realizable air knife assembly yields seeing errors that are well within the error budget under which the air knife interface falls, even with a temperature differential of 20°C between laboratory and ambient spaces. With ambient temperature set to 0°C and conditioned temperature set to 20

  15. Reconstruction of Radio Images of the Sun Obtained by the Siberian Solar Radio Telescope

    NASA Astrophysics Data System (ADS)

    Lesovoy, S. V.

    2002-11-01

    Reconstruction of radio images of the Sun obtained by the Siberian Solar Radio Telescope (SSRT) encounters two main problems. First, since the solar radio images at a wavelength of 5.2 cm have a high contrast, the amplitude-phase distribution in the antenna-feeder section should be known with a very high accuracy. Second, since such images comprise not only bright compact components but also low-contrast diffuse areas, there is a problem of deconvolution of these diffuse sources, which is inherent to the CLEAN algorithm. To solve the first problem, we determine the amplitude-phase distortions by an iterative analysis of the image itself, in which the opposite sidelobes of the point-source response are compared. To suppress the influence of other sources on the response, we analyze several compact sources. The phase distortions are determined from the asymmetry of the sidelobes, and the amplitude distortions, from sidelobe values. The image is corrected in the spatial-spectrum domain after each iteration. On the one hand, the problems encountered when reconstructing extended sources are related to the fact that the CLEAN algorithm requires significant computer resources. On the other hand, reconstructing images of extended areas requires that the number of cycles of this algorithm should be increased. Another problem consists in the fact that the use of the same ``clean'' antenna pattern for reconstructing compact and extended sources results in appearance of high-frequency distortions of the latter sources. If the CLEAN algorithm is applied, then the computer resources are mainly spent to shift the pattern and to find the maximum of the initial image. We decrease the time necessary for shifting the pattern by excluding the points near the zero value from the antenna-pattern data set and by sorting the remaining data points. The time of finding the maximum was decreased by using a local search window. In addition, we use a number of cutoff levels and search the next

  16. Hot Plasma from Solar Active-Region Cores: Constraints from the Hinode X-Ray Telescope

    NASA Astrophysics Data System (ADS)

    Schmelz, J. T.; Christian, G. M.; Matheny, P. O.

    2016-12-01

    Mechanisms invoked to heat the solar corona to millions of degrees kelvin involve either magnetic waves or magnetic reconnections. Turbulence in the convection zone produces MHD waves, which travel upward and dissipate. Photospheric motions continuously build up magnetic energy, which is released through magnetic reconnection. In this paper, we concentrate on hot non-flaring plasma with temperatures of 5 MK < T < 10 MK because it is one of the few observables for which wave and reconnection models make different predictions. Wave models predict no (or little) hot plasma, whereas reconnection models predict it, although in amounts that are challenging to detect with current instrumentation. We used data from the X-ray Telescope (XRT) and the Atmospheric Imaging Assembly (AIA). We requested a special XRT observing sequence, which cycled through the thickest XRT filter several times per hour so we could average these images and improve the signal-to-noise. We did differential emission measure (DEM) analysis using the time-averaged thick-filter data as well as all available channels from both the XRT and AIA for regions observed on 2014 December 11. Whereas our earlier work was only able to determine that plasma with a temperature greater than 5 MK was present, we are now able to find a well-constrained DEM distribution. We have therefore added a strong observational constraint that must be explained by any viable coronal heating model. Comparing state-of-the-art wave and reconnection model predictions, we can conclude that reconnection is heating the hot plasma in these active regions.

  17. Support optimization of the ring primary mirror of a 2m solar telescope

    NASA Astrophysics Data System (ADS)

    Yang, Dehua; Jin, Zhenyu; Liu, Zhong

    2016-08-01

    A special 2-m Ring Solar Telescope (2-m RST) is to be built by YNAO-Yunnan Astronomical Observatory, Kunming, China. Its distinct primary mirror is distinctively shaped in a ring with an outer diameter of 2.02 m and a ring width of 0.35 m. Careful calculation and optimization of the mirror support pattern have been carried out first of all to define optimum blank parameters in view of performance balance of support design, fabrication and cost. This paper is to review the special consideration and optimization of the support design for the unique ring mirror. Schott zerodur is the prevailing candidate for the primary mirror blank. Diverse support patterns with various blank thicknesses have been discussed by extensive calculation of axial support pattern of the mirror. We reached an optimum design of 36 axial supports for a blank thickness of 0.15 m with surface error of 5 nm RMS. Afterwards, lateral support scheme was figured out for the mirror with settled parameters. A classical push-and-pull scheme was used. Seeing the relative flexibility of the ring mirror, special consideration was taken to unusually set the acting direction of the support forces not in the mirror gravity plane, but along the gravity of the local virtual slices of the mirror blank. Nine couples of the lateral push-pull force are considered. When pointing to horizon, the mirror surface exhibits RMS error of 5 nm with three additional small force couples used to compensate for the predominant astigmatism introduced by lateral supports. Finally, error estimation has been performed to evaluate the surface degradation with introduced errors in support force and support position, respectively, for both axial and lateral supports. Monte Carlo approach was applied using unit seeds for amplitude and position of support forces. The comprehensive optimization and calculation suggests the support systems design meet the technic requirements of the ring mirror of the 2-m RST.

  18. Integration of functional safety systems on the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Williams, Timothy R.; Hubbard, Robert P.; Shimko, Steve

    2016-07-01

    The Daniel K. Inouye Solar Telescope (DKIST) was envisioned from an early stage to incorporate a functional safety system to ensure the safety of personnel and equipment within the facility. Early hazard analysis showed the need for a functional safety system. The design used a distributed approach in which each major subsystem contains a PLC-based safety controller. This PLC-based system complies with the latest international standards for functional safety. The use of a programmable controller also allows for flexibility to incorporate changes in the design of subsystems without adversely impacting safety. Various subsystems were built by different contractors and project partners but had to function as a piece of the overall control system. Using distributed controllers allows project contractors and partners to build components as standalone subsystems that then need to be integrated into the overall functional safety system. Recently factory testing was concluded on the major subsystems of the facility. Final integration of these subsystems is currently underway on the site. Building on lessons learned in early factory tests, changes to the interface between subsystems were made to improve the speed and ease of integration of the entire system. Because of the distributed design each subsystem can be brought online as it is delivered and assembled rather than waiting until the entire facility is finished. This enhances safety during the risky period of integration and testing. The DKIST has implemented a functional safety system that has allowed construction of subsystems in geographically diverse locations but that function cohesively once they are integrated into the facility currently under construction.

  19. Stray light control for asteroid detection at low solar elongation for the NEOSSat micro-satellite telescope

    NASA Astrophysics Data System (ADS)

    Isbrucker, Victor; Stauder, John; Laurin, Denis; Hollinger, Allan

    2012-09-01

    The Near Earth Object Surveillance Satellite (NEOSSat) is a small satellite dedicated to finding near Earth asteroids. Its surveying strategy consists of imaging areas of the sky to low solar elongation, while in a sun synchronous polar orbit (dawn-dusk). A high performance baffle will control stray light mainly due to Earth shine. Observation scenarios require solar shielding down to 45 degree solar elongation over a wide range of ecliptic latitudes. In order to detect the faintest objects (approx 20th v mag) given a 15 cm telescope and CCD detection system, background from stray light is a critical operational concern. The required attenuation is in the order of 10-12. The requirement was verified by analyses; testing was not attempted because the level of attenuation is difficult to measure reliably. We report consistent results of stray light optical modelling from two independent analyses. Launch is expected for late 2012.

  20. Flows in and around Active Region NOAA12118 Observed with the GREGOR Solar Telescope and SDO/HMI

    NASA Astrophysics Data System (ADS)

    Verma, M.; Denker, C.; Balthasar, H.; Kuckein, C.; González Manrique, S. J.; Sobotka, M.; Bello González, N.; Hoch, S.; Diercke, A.; Kummerow, P.; Berkefeld, T.; Collados, M.; Feller, A.; Hofmann, A.; Kneer, F.; Lagg, A.; Löhner-Böttcher, J.; Nicklas, H.; Pastor Yabar, A.; Schlichenmaier, R.; Schmidt, D.; Schmidt, W.; Schubert, M.; Sigwarth, M.; Solanki, S. K.; Soltau, D.; Staude, J.; Strassmeier, K.; Volkmer, R.; von der Lühe, O.; Waldmann, T.

    2016-04-01

    Accurate measurements of magnetic and velocity fields in and around solar active regions are key to unlocking the mysteries of the formation and the decay of sunspots. High spatial resolution images and spectral sequences with a high cadence obtained with the GREGOR solar telescope give us an opportunity to scrutinize 3-D flow fields with local correlation tracking and imaging spectroscopy. We present GREGOR early science data acquired in 2014 July - August with the GREGOR Fabry-Pérot Interferometer and the Blue Imaging Channel. Time-series of blue continuum (λ 450.6 nm) images of the small active region NOAA 12118 were restored with the speckle masking technique to derive horizontal proper motions and to track the evolution of morphological changes. In addition, high-resolution observations are discussed in the context of synoptic data from the Solar Dynamics Observatory.

  1. Probing Seismic Solar Analogues Through Observations With The NASA Kepler Space Telescope and Hermes High-Resolution Spectrograph

    NASA Astrophysics Data System (ADS)

    Beck, P. G.; Salabert, D.; Garcia, R. A.; do Nascimento, J., Jr.; Duarte, T. S. S.; Mathis, S.; Regulo, C.; Ballot, J.; Egeland, R.; Castro, M.; Pérez-Herńandez, F.,; Creevey, O.; Tkachenko, A.; van Reeth, T.; Bigot, L.; Corsaro, E.; Metcalfe, T.; Mathur, S.; Palle, P. L.; Allende Prieto, C.; Montes, D.; Johnston, C.; Andersen, M. F.; van Winckel, H.

    2016-11-01

    Stars similar to the Sun, known as solar analogues, provide an excellent opportunity to study the preceding and following evolutionary phases of our host star. The unprecedented quality of photometric data collected by the Kepler NASA mission allows us to characterise solar-like stars through asteroseismology and study diagnostics of stellar evolution, such as variation of magnetic activity, rotation and the surface lithium abundance. In this project, presented in a series of papers by Salabert et al (2016ab) and Beck et al. (2016ab), we investigate the link between stellar activity, rotation, lithium abundance and oscillations in a group of 18 solar-analogue stars through space photometry, obtained with the NASA Kepler space telescope and from currently 50+ hours of ground-based, high-resolution spectroscopy with the Hermes instrument. In these proceedings, we first discuss the selection of the stars in the sample, observations and calibrations and then summarise the main results of the project. By investigating the chromospheric and photospheric activity of the solar analogues in this sample, it was shown that for a large fraction of these stars the measured activity levels are compatible to levels of the 11-year solar activity cycle 23. A clear correlation between the lithium abundance and surface rotation was found for rotation periods shorter than the solar value. Comparing the lithium abundance measured in the solar analogues to evolutionary models with the Toulouse-Geneva Evolutionary Code (TGEC), we found that the solar models calibrated to the Sun also correctly describe the set of solar/stellar analogs showing that they share the same internal mixing physics. Finally, the star KIC3241581 and KIC10644353 are discussed in more detail.

  2. Simulated Solar Flare X-Ray and Thermal Cycling Durability Evaluation of Hubble Space Telescope Thermal Control Candidate Replacement Materials

    NASA Technical Reports Server (NTRS)

    deGroh, Kim K.; Banks, Bruce A.; Sechkar, Edward A.; Scheiman, David A.

    1998-01-01

    During the Hubble Space Telescope (HST) second servicing mission (SM2), astronauts noticed that the multilayer insulation (MLI) covering the telescope was damaged. Large pieces of the outer layer of MLI (aluminized Teflon fluorinated ethylene propylene (Al-FEP)) were torn in several locations around the telescope. A piece of curled up Al-FEP was retrieved by the astronauts and was found to be severely embrittled, as witnessed by ground testing. Goddard Space Flight Center (GSFC) organized a HST MLI Failure Review Board (FRB) to determine the damage mechanism of FEP in the HST environment, and to recommend replacement insulation material to be installed on HST during the third servicing mission (SM3) in 1999. Candidate thermal control replacement materials were chosen by the FRB and tested for environmental durability under various exposures and durations. This paper describes durability testing of candidate materials which were exposed to charged particle radiation, simulated solar flare x-ray radiation and thermal cycling under load. Samples were evaluated for changes in solar absorptance and tear resistance. Descriptions of environmental exposures and durability evaluations of these materials are presented.

  3. A normal incidence, high resolution X-ray telescope for solar coronal observations

    NASA Technical Reports Server (NTRS)

    Golub, L.

    1984-01-01

    A Normal Incidence high resolution X-ray Telescope is reported. The design of a telescope assembly which, after fabrication, will be integrated with the mirror fabrication process is described. The assembly is engineered to fit into the Black Brant rocket skin to survive sounding rocket launch conditions. A flight ready camera is modified and tested.

  4. Search for solar axions by the CERN axion solar telescope with 3He buffer gas: closing the hot dark matter gap.

    PubMed

    Arik, M; Aune, S; Barth, K; Belov, A; Borghi, S; Bräuninger, H; Cantatore, G; Carmona, J M; Cetin, S A; Collar, J I; Da Riva, E; Dafni, T; Davenport, M; Eleftheriadis, C; Elias, N; Fanourakis, G; Ferrer-Ribas, E; Friedrich, P; Galán, J; García, J A; Gardikiotis, A; Garza, J G; Gazis, E N; Geralis, T; Georgiopoulou, E; Giomataris, I; Gninenko, S; Gómez, H; Gómez Marzoa, M; Gruber, E; Guthörl, T; Hartmann, R; Hauf, S; Haug, F; Hasinoff, M D; Hoffmann, D H H; Iguaz, F J; Irastorza, I G; Jacoby, J; Jakovčić, K; Karuza, M; Königsmann, K; Kotthaus, R; Krčmar, M; Kuster, M; Lakić, B; Lang, P M; Laurent, J M; Liolios, A; Ljubičić, A; Luzón, G; Neff, S; Niinikoski, T; Nordt, A; Papaevangelou, T; Pivovaroff, M J; Raffelt, G; Riege, H; Rodríguez, A; Rosu, M; Ruz, J; Savvidis, I; Shilon, I; Silva, P S; Solanki, S K; Stewart, L; Tomás, A; Tsagri, M; van Bibber, K; Vafeiadis, T; Villar, J; Vogel, J K; Yildiz, S C; Zioutas, K

    2014-03-07

    The CERN Axion Solar Telescope has finished its search for solar axions with (3)He buffer gas, covering the search range 0.64 eV ≲ ma ≲ 1.17 eV. This closes the gap to the cosmological hot dark matter limit and actually overlaps with it. From the absence of excess x rays when the magnet was pointing to the Sun we set a typical upper limit on the axion-photon coupling of gaγ ≲ 3.3 × 10(-10)  GeV(-1) at 95% C.L., with the exact value depending on the pressure setting. Future direct solar axion searches will focus on increasing the sensitivity to smaller values of gaγ, for example by the currently discussed next generation helioscope International AXion Observatory.

  5. RE-EVALUATION OF THE NEUTRON EMISSION FROM THE SOLAR FLARE OF 2005 SEPTEMBER 7, DETECTED BY THE SOLAR NEUTRON TELESCOPE AT SIERRA NEGRA

    SciTech Connect

    González, L. X.; Valdés-Galicia, J. F.; Musalem, O.; Hurtado, A.; Sánchez, F.; Muraki, Y.; Sako, T.; Matsubara, Y.; Nagai, Y.; Watanabe, K.; Shibata, S.; Sakai, T.

    2015-12-01

    The X17.0 solar flare of 2005 September 7 released high-energy neutrons that were detected by the Solar Neutron Telescope (SNT) at Sierra Negra, Mexico. In three separate and independent studies of this solar neutron event, several of its unique characteristics were studied; in particular, a power-law energy spectra was estimated. In this paper, we present an alternative analysis, based on improved numerical simulations of the detector using GEANT4, and a different technique for processing the SNT data. The results indicate that the spectral index that best fits the neutron flux is around 3, in agreement with previous works. Based on the numerically calculated neutron energy deposition on the SNT, we confirm that the detected neutrons might have reached an energy of 1 GeV, which implies that 10 GeV protons were probably produced; these could not be observed at Earth, as their parent flare was an east limb event.

  6. The James Webb Space Telescope's Plan for Operations and Instrument Capabilities for Observations in the Solar System

    NASA Technical Reports Server (NTRS)

    Milam, Stefanie N.; Stansberry, John A.; Sonneborn, George; Thomas, Cristina

    2016-01-01

    The James Webb Space Telescope (JWST) is optimized for observations in the near- and mid-infrared and will provide essential observations for targets that cannot be conducted from the ground or other missions during its lifetime. The state-of-the-art science instruments, along with the telescope's moving target tracking, will enable the infrared study, with unprecedented detail, for nearly every object (Mars and beyond) in the Solar System. The goals of this special issue are to stimulate discussion and encourage participation in JWST planning among members of the planetary science community. Key science goals for various targets, observing capabilities for JWST, and highlights for the complementary nature with other missions/observatories are described in this paper.

  7. Soft X-ray Images of the Solar Corona with a Normal-Incidence Cassegrain Multilayer Telescope.

    PubMed

    Walker, A B; Lindblom, J F; Barbee, T W; Hoover, R B

    1988-09-30

    High-resolution images of the sun in the soft x-ray to extreme ultraviolet(EUV) regime have been obtained with normal-incidence Cassegrain multilayer telescopes operated from a sounding rocket in space. The inherent energy-selective property of multilayer-coated optics allowed distinct groups of emission lines to be isolated in the solar corona and the transition region. The Cassegrain telescopes provided images in bands centered at 173 and 256 angstroms. The bandpass centered at 173 angstroms is dominated by emission from the ions Fe IX Fe X. This emission is from coronal plasma in the temperature range 0.8 x 10(6) to 1.4 x 10(6)K. The images have angular resolution of about 1.0 to 1.5 arc seconds, and show no degradation because of x-ray scattering. Many features of coronal structure, including magnetically confined loops of hot plasma, coronal plumes, polar coronal holes, faint structures on the size scale of supergranulation and smaller, and features due to overlying cool prominences are visible in the images. The density structure of polar plumes, which are thought to contribute to the solar wind, has been derived from the observations out to 1.7 solar radii.

  8. Use of graphite epoxy composites in the Solar-A Soft X-Ray Telescope

    NASA Technical Reports Server (NTRS)

    Jurcevich, B. K.; Bruner, M. E.

    1990-01-01

    This paper describes the use of composite materials in the Soft X-Ray Telescope (SXT). One of the primary structural members of the telescope is a graphite epoxy metering tube. The metering tube maintains the structural stability of the telescope during launch as well as the focal length through various environmental conditions. The graphite epoxy metering tube is designed to have a negative coefficient of thermal expansion to compensate for the positive expansion of titanium structural supports. The focus is maintained to + or - 0.001 inch by matching the CTE of the composite tube to the remaining structural elements.

  9. QUIESCENT PROMINENCE DYNAMICS OBSERVED WITH THE HINODE SOLAR OPTICAL TELESCOPE. I. TURBULENT UPFLOW PLUMES

    SciTech Connect

    Berger, Thomas E.; Slater, Gregory; Hurlburt, Neal; Shine, Richard; Tarbell, Theodore; Title, Alan; Okamoto, Takenori J.; Ichimoto, Kiyoshi; Katsukawa, Yukio; Magara, Tetsuya; Suematsu, Yoshinori; Shimizu, Toshifumi

    2010-06-20

    Hinode/Solar Optical Telescope (SOT) observations reveal two new dynamic modes in quiescent solar prominences: large-scale (20-50 Mm) 'arches' or 'bubbles' that 'inflate' from below into prominences, and smaller-scale (2-6 Mm) dark turbulent upflows. These novel dynamics are related in that they are always dark in visible-light spectral bands, they rise through the bright prominence emission with approximately constant speeds, and the small-scale upflows are sometimes observed to emanate from the top of the larger bubbles. Here we present detailed kinematic measurements of the small-scale turbulent upflows seen in several prominences in the SOT database. The dark upflows typically initiate vertically from 5 to 10 Mm wide dark cavities between the bottom of the prominence and the top of the chromospheric spicule layer. Small perturbations on the order of 1 Mm or less in size grow on the upper boundaries of cavities to generate plumes up to 4-6 Mm across at their largest widths. All plumes develop highly turbulent profiles, including occasional Kelvin-Helmholtz vortex 'roll-up' of the leading edge. The flows typically rise 10-15 Mm before decelerating to equilibrium. We measure the flowfield characteristics with a manual tracing method and with the Nonlinear Affine Velocity Estimator (NAVE) 'optical flow' code to derive velocity, acceleration, lifetime, and height data for several representative plumes. Maximum initial speeds are in the range of 20-30 km s{sup -1}, which is supersonic for a {approx}10,000 K plasma. The plumes decelerate in the final few Mm of their trajectories resulting in mean ascent speeds of 13-17 km s{sup -1}. Typical lifetimes range from 300 to 1000 s ({approx}5-15 minutes). The area growth rate of the plumes (observed as two-dimensional objects in the plane of the sky) is initially linear and ranges from 20,000 to 30,000 km{sup 2} s{sup -1} reaching maximum projected areas from 2 to 15 Mm{sup 2}. Maximum contrast of the dark flows relative to

  10. A normal incidence, high resolution X-ray telescope for solar coronal observations

    NASA Technical Reports Server (NTRS)

    Golub, L.

    1984-01-01

    Efforts directed toward the completion of an X-ray telescope assembly design, the procurement of major components, and the coordination of optical fabrication and X-ray multilayer testing are reported.

  11. Thermally Induced Vibrations of the Hubble Space Telescope's Solar Array 3 in a Test Simulated Space Environment

    NASA Technical Reports Server (NTRS)

    Early, Derrick A.; Haile, William B.; Turczyn, Mark T.; Griffin, Thomas J. (Technical Monitor)

    2001-01-01

    NASA Goddard Space Flight Center and the European Space Agency (ESA) conducted a disturbance verification test on a flight Solar Array 3 (SA3) for the Hubble Space Telescope using the ESA Large Space Simulator (LSS) in Noordwijk, the Netherlands. The LSS cyclically illuminated the SA3 to simulate orbital temperature changes in a vacuum environment. Data acquisition systems measured signals from force transducers and accelerometers resulting from thermally induced vibrations of the SAI The LSS with its seismic mass boundary provided an excellent background environment for this test. This paper discusses the analysis performed on the measured transient SA3 responses and provides a summary of the results.

  12. Development of compact metal-mirror image slicer unit for optical telescope of the SOLAR-C mission

    NASA Astrophysics Data System (ADS)

    Suematsu, Y.; Saito, K.; Koyama, M.; Enokida, Y.; Okura, Y.; Nakayasu, T.; Sukegawa, T.

    2016-07-01

    To realize an integral field unit (IFU) for a one-meter class optical telescope (SUVIT) on board Japanese next solar mission (SOLAR-C), we studied an optical design and manufacturing method to attain high optical performances for IFU, using a novel manufacturing technique developed by Canon. The IFU consists of micro-image slicer of 45 arrayed 30-micron-thick metal mirrors and a pseudo-pupil mirror array for making three pseudo-slits, providing possible optical configuration for a coexistence with a usual slit spectrograph without movable mechanism. The IFU mirrors were deposited by a protected silver coating for high reflectivity in visible and near IR wavelength region. We present the optical design, performance of prototype IFU and space qualification tests of the silver coating.

  13. Thermal Performance of the Hubble Space Telescope (HST) Solar Array-3 During the Disturbance Verification Test (DVT)

    NASA Technical Reports Server (NTRS)

    Nguyen, Daniel H.; Skladany, Lynn M.; Prats, Benito D.; Griffin, Thomas J. (Technical Monitor)

    2001-01-01

    The Hubble Space Telescope (HST) is one of NASA's most productive astronomical observatories. Launched in 1990, the HST continues to gather scientific data to help scientists around the world discover amazing wonders of the universe. To maintain HST in the fore front of scientific discoveries, NASA has routinely conducted servicing missions to refurbish older equipment as well as to replace existing scientific instruments with better, more powerful instruments. In early 2002, NASA will conduct its fourth servicing mission to the HST. This servicing mission is named Servicing Mission 3B (SM3B). During SM3B, one of the major refurbishment efforts will be to install new rigid-panel solar arrays as a replacement for the existing flexible-foil solar arrays. This is necessary in order to increase electrical power availability for the new scientific instruments. Prior to installing the new solar arrays on HST, the HST project must be certain that the new solar arrays will not cause any performance degradations to the observatory. One of the major concerns is any disturbance that can cause pointing Loss of Lock (LOL) for the telescope. While in orbit, the solar-array temperature transitions quickly from sun to shadow. The resulting thermal expansion and contraction can cause a "mechanical disturbance" which may result in LOL. To better characterize this behavior, a test was conducted at the European Space Research and Technology Centre (ESTEC) in the Large Space Simulator (LSS) thermal-vacuum chamber. In this test, the Sun simulator was used to simulate on-orbit effects on the solar arrays. This paper summarizes the thermal performance of the Solar Array-3 (SA3) during the Disturbance Verification Test (DVT). The test was conducted between 26 October 2000 and 30 October 2000. Included in this paper are: (1) brief description of the SA3's components and its thermal design; (2) a summary of the on-orbit temperature predictions; (3) pretest thermal preparations; (4) a

  14. ULTRA-NARROW NEGATIVE FLARE FRONT OBSERVED IN HELIUM-10830 Å USING THE 1.6 m NEW SOLAR TELESCOPE

    SciTech Connect

    Xu, Yan; Liu, Chang; Jing, Ju; Wang, Haimin; Cao, Wenda; Gary, Dale; Ding, Mingde; Kleint, Lucia; Su, Jiangtao; Ji, Haisheng; Chae, Jongchul; Cho, Kyuhyoun; Cho, Kyungsuk

    2016-03-10

    Solar flares are sudden flashes of brightness on the Sun and are often associated with coronal mass ejections and solar energetic particles that have adverse effects on the near-Earth environment. By definition, flares are usually referred to as bright features resulting from excess emission. Using the newly commissioned 1.6 m New Solar Telescope at Big Bear Solar Observatory, we show a striking “negative” flare with a narrow but unambiguous “dark” moving front observed in He i 10830 Å, which is as narrow as 340 km and is associated with distinct spectral characteristics in Hα and Mg ii lines. Theoretically, such negative contrast in He i 10830 Å can be produced under special circumstances by nonthermal electron collisions or photoionization followed by recombination. Our discovery, made possible due to unprecedented spatial resolution, confirms the presence of the required plasma conditions and provides unique information in understanding the energy release and radiative transfer in astronomical objects.

  15. Imaging Extra-Solar Planets with an Ultra-Large Space Telescope

    NASA Technical Reports Server (NTRS)

    Taylor, Charles R.

    1998-01-01

    NASA's Origins Program is directed toward two main goals: Imaging of galactic evolution in the early universe, and searching for planets orbiting nearby stars. The Next-Generation Space Telescope (NGST), operating at low temperature with an 8-m aperture, is well designed to meet the first goal. The goal of imaging planets orbiting nearby stars is more problematic. One line of investigation has been the ULTIMA concept (Ultra-Large Telescope, Integrated Missions in Astronomy). In this report, I will lay out the resolution requirements for telescopes to achieve the imaging of extrasolar planets, and describe a modeling tool created to investigate the requirements for imaging a planet when it is very near a much brighter star.

  16. NEAT: an astrometric space telescope to search for habitable exoplanets in the solar neighborhood

    NASA Astrophysics Data System (ADS)

    Crouzier, A.; Malbet, F.; Kern, P.; Feautrier, P.; Preiss, O.; Martin, G.; Henault, F.; Stadler, E.; Lafrasse, S.; Behar, E.; Saintpe, M.; Dupont, J.; Potin, S.; Lagage, P.-O.; Cara, C.; Leger, A.; Leduigou, J.-M.; Shao, M.; Goullioud, R.

    2014-03-01

    The last decade has witnessed a spectacular development of exoplanet detection techniques, which led to an exponential number of discoveries and a great diversity of known exoplanets. However, it must be noted that the quest for the holy grail of astrobiology, i.e. a nearby terrestrial exoplanet in habitable zone around a solar type star, is still ongoing and proves to be very hard. Radial velocities will have to overcome stellar noise if there are to discover habitable planets around stars more massive than M ones. For very close systems, transits are impeded by their low geometrical probability. Here we present an alternative concept: space astrometry. NEAT (Nearby Earth Astrometric Telescope) is a concept of astrometric mission proposed to ESA which goal is to make a whole sky survey of close (less then 20 pc) planetary systems. The detection limit required for the instrument is the astrometric signal of an Earth analog (at 10 pc). Differential astrometry is a very interesting tool to detect nearby habitable exoplanets. Indeed, for F, G and K main sequence stars, the astrophysical noise is smaller than the astrometric signal, contrary to the case for radial velocities. The difficulty lies in the fact that the signal of an exo-Earth around a G type star at 10 pc is a tiny 0.3 micro arc sec, which is equivalent to a coin on the moon, seen from the Earth: the main challenge is related to instrumentation. In order to reach this specification, NEAT consists of two formation flying spacecraft at a 40m distance, one carries the mirror and the other one the focal plane. Thus NEAT has a configuration with only one optical surface: an off-axis parabola. Consequently, beamwalk errors are common to the whole field of view and have a small effect on differential astrometry. Moreover a metrology system projects young fringes on the focal plane, which can characterize the pixels whenever necessary during the mission. NEAT has two main scientific objectives: combined with

  17. A normal incidence, high resolution X-ray telescope for solar coronal observations

    NASA Technical Reports Server (NTRS)

    Golub, L.

    1985-01-01

    The following major activities were advanced or completed: complete design of the entire telescope assembly and fabrication of all front-end components; specification of all rocket skin sections including bulkheads, feedthroughs and access door; fabrication, curing, and delivery of the large graphite-epoxy telescope tube; engineering analysis of the primary mirror vibration test was completed and a decision made to redesign the mirror attachment to a kinematic three-point mount; detail design of the camera control, payload and housekeeping electronics; and multilayer mirror flats with 2d spacings of 50 A and 60 A.

  18. The Hadean, Through a Glass Telescopically: Observations of Young Solar Analogs

    NASA Technical Reports Server (NTRS)

    Gaidos, E. J.

    1998-01-01

    Investigations into the Earth's surface environment during the Hadean eon (prior to 3.8 Ga) are hampered by the paucity of the geological and geochemical record and the relative inaccessibility of better-preserved surfaces with possibly similar early histories (i.e., Mars). One approach is to observe nearby, young solar-mass stars as analogs to the Hadean Sun and its environment. A catalog of 38 G and early K stars within 25 pc was constructed based on main-sequence status, bolometric luminosity, lack of known stellar companions within 800 AU, and coronal X-ray luminosities commensurate with the higher activity of solar-mass stars <0.8 b.y. old. Spectroscopic data support the assignment of ages of 0.2 - 0.8 Ga for most of these stars. Observations of these objects will provide insight into external forces that influenced Hadean atmosphere, ocean, and surface evolution (and potential ecosystems), including solar luminosity evolution, the flux and spectrum of solar ultraviolet radiation, the intensity of the solar wind, and the intensity and duration of a late period of heavy bombardment. The standard model of solar evolution predicts a luminosity of 0.75 solar luminosity at the end of the Hadean, implying a terrestrial surface temperature inconsistent with the presence of liquid water and motivating atmospheric greenhouse models. An alternative model fo solar evolution that invokes mass loss, constructed to explain solar Li depletion, attenuates or reverses this luminosity evolution of the atmospheres of Earth and the other terrestrial planets. This model can be tested by Li abundance measurements. The continuum emission from stellar wind plasma during significant mass loss may be detectable at millimeter and radio wavelengths. The Earth (and Moon) experienced a period of intense bombardment prior to 3.8 Ga, long after accretion was completed in the inner solar system and possibly associated with the clearing of residual planetesimals in the outer solar system. Such

  19. UMBRAS: a matched occulter and telescope for imaging extrasolar planets

    NASA Astrophysics Data System (ADS)

    Schultz, Alfred B.; Jordan, Ian J.; Kochte, Mark; Fraquelli, Dorothy A.; Bruhweiler, Fred; Hollis, Jan M.; Carpenter, Kenneth G.; Lyon, Richard G.; DiSanti, Mike A.; Miskey, Cherie L.; Leitner, Jesse; Burns, Richard D.; Starin, Scott R.; Rodrigue, Melodi; Fadali, M. S.; Skelton, Dennis L.; Hart, Helen M.; Hamilton, Forrest C.; Cheng, Kwang-Ping

    2003-02-01

    We describe a 1-meter space telescope plus free-flying occulter craft mission that would provide direct imaging and spectroscopic observations of Jovian and Uranus-sized planets about nearby stars not detectable by Doppler techniques. The Doppler technique is most sensitive for the detection of massive, close-in extrasolar planets while the use of a free-flying occulter would make it possible to image and study stellar systems with planets comparable to our own Solar System. Such a mission with a larger telescope has the potential to detect earth-like planets. Previous studies of free-flying occulters reported advantages in having the occulting spot outside the telescope compared to a classical coronagraph onboard a space telescope. Using an external occulter means light scatter within the telescope is reduced due to fewer internal obstructions and less light entering the telescope and the polishing tolerances of the primary mirror and the supporting optics can be less stringent, thereby providing higher contrast and fainter detection limits. In this concept, the occulting spot is positioned over the star by translating the occulter craft, at distances of 1,000 to 15,000 kms from the telescope, on the sky instead of by moving the telescope. Any source within the telescope field-of-view can be occulted without moving the telescope. In this paper, we present our current concept for a 1-m space telescope matched to a free-flying occulter, the Umbral Missions Blocking Radiating Astronomical Sources (UMBRAS) space mission. An UMBRAS space mission consists of a Solar Powered Ion Driven Eclipsing Rover (SPIDER) occulter craft and a matched (apodized) telescope. The occulter spacecraft would be semi-autonomous, with its own propulsion systems, internal power (solar cells), communications, and navigation capability. Spacecraft rendezvous and formation flying would be achieved with the aid of telescope imaging, RF or laser ranging, celestial navigation inputs, and formation

  20. Proposed conversion of the McMath telescope to 4.0 meter aperture for solar observations in the IR

    NASA Astrophysics Data System (ADS)

    Livingston, William

    1991-09-01

    Located on a 2076 m summit in Arizona, the present all-reflective McMath optical system consists of a 2.0-m CERVIT flat mounted as a heliostat to follow the sun, a 1.6-m 86.4 m focal-length quartz concave positioned within an inclined underground tunnel, and a 1.5-m CERVIT flat which directs the image to different fixed instrument stations. The building is adequate to accommodate a 6.0-m tracking feed and a 4.0-m concave, resulting in an f/22 beam. A 4.0 m aperture is desirable for adequate flux and resolution at 12 microns where a number of Zeeman sensitive atomic lines are found, lines which are a diagnostic for solar magnetism. At 12 microns, the diffraction limit is 0.75 arcsec, and this resolution might be realized a significant fraction of time because of improved seeing at these IR wavelengths. Direct vector measurements of solar magnetic fields would become possible because effective Zeeman splitting is proportional to wavelength, both the linear and circular Stokes amplitudes are proportional to their vector field components, and instrumental polarization becomes negligible at 12 microns. The telescope would also be used at night by the solar/stellar community.

  1. Telescopes and space exploration

    NASA Technical Reports Server (NTRS)

    Brandt, J. C.; Maran, S. P.

    1976-01-01

    The necessity for different types of telescopes for astronomical investigations is discussed. Major findings in modern astronomy by ground-based and spaceborne telescopes are presented. Observations of the Crab Nebula, solar flares, interstellar gas, and the Black Hole are described. The theory of the oscillating universe is explored. Operating and planned telescopes are described.

  2. A deployment mechanism for the double roll-out flexible solar array on the space telescope

    NASA Technical Reports Server (NTRS)

    Cawsey, T. R.

    1982-01-01

    A roll-out flexible array which provides more than 4 kW of power for the space telescope was developed. The Array is configured as two wings. The deployment mechanism for each wing is based on flight-proven FRUSA design. Modifications have been incorporated to accommodate an increase in size and mission requirements. The assembly and operation of the deployment mechanism are described together with environmental and functional tests results.

  3. A CATALOG OF SOLAR X-RAY PLASMA EJECTIONS OBSERVED BY THE SOFT X-RAY TELESCOPE ON BOARD YOHKOH

    SciTech Connect

    Tomczak, M.; Chmielewska, E. E-mail: chmielewska@astro.uni.wroc.pl

    2012-03-01

    A catalog of X-ray plasma ejections (XPEs) observed by the Soft X-ray Telescope on board the Yohkoh satellite has been recently developed in the Astronomical Institute of University of Wroclaw. The catalog contains records of 368 events observed in years 1991-2001 including movies and cross-references to associated events like flares and coronal mass ejections (CMEs). One hundred sixty-three XPEs out of 368 in the catalog were not reported until now. A new classification scheme of XPEs is proposed in which morphology, kinematics, and recurrence are considered. The relation between individual subclasses of XPEs and the associated events was investigated. The results confirm that XPEs are strongly inhomogeneous, responding to different processes that occur in the solar corona. A subclass of erupting loop-like XPEs is a promising candidate to be a high-temperature precursor of CMEs.

  4. Observations of Dark Lanes in Umbral Fine Structure from the Hinode Solar Optical Telescope: Evidence for Magnetoconvection

    NASA Astrophysics Data System (ADS)

    Bharti, Lokesh; Joshi, Chandan; Jaaffrey, S. N. A.

    2007-11-01

    An analysis of high-resolution G-band images of active region NOAA 10930 is presented. The observations were recorded with the Broadband Filter Imager (BFI) attached to the Solar Optical Telescope (SOT) on board the Hinode mission. We observed dark lanes in umbral dots up to six folds in larger ones. Formation of umbral dots from dark core penumbral filament shows dark lanes. The evolution of the light bridge from the dark core penumbral filament is observed, which further disintegrates into umbral dots. These observations are compatible with the simulations of three-dimensional radiative magnetoconvection with gray radiative transfer in sunspot umbra by Schüssler & Vögler, which support the notion that these structures appear as a result of magnetoconvection.

  5. Limitations Placed on the Time Coverage, Isoplanatic Patch Size and Exposure Time for Solar Observations Using Image Selection Procedures in the Presence of Telescope Aberrations

    NASA Astrophysics Data System (ADS)

    Beckers, J. M.; Rimmele, T. R.

    1996-12-01

    Image selection, adaptive optics and post-facto image restoration methods are all techniques being used for diffraction limited imaging with ground-based solar and stellar telescopes. Often these techniques are used in a hybrid form like e.g. the application of adaptive optics and/or post-facto image restoration in combination with already good images obtained by image selection in periods of good seeing. Fried (JOSA 56, 1372, 1966), Hecquet and Coupinot (J. Optics/Paris 16, 21, 1985) and Beckers ("Solar and Stellar Granulation", Kluwer, Rutten & Severino Eds, 55, 1988) already discussed the usefulness of image selection, or the "Lucky Observer" mode, for high resolution imaging. All assumed perfect telescope optics. In case of moderate telescope aberrations image selection can still lead to diffraction limited imaging but only when the atmospheric wavefront aberration happens to compensate that of the telescope. In this "Very Lucky Observer" mode the probability of obtaining a good image is reduced over the un-aberrated case, as are the size of the isoplanatic patch and the exposure time. We describe an analysis of these effects for varying telescope aberrations. These result in a strong case for the removal of telescope aberrations either by initial implementation or by the use of slow active optics.

  6. Effect of Solar Exposure on the Atomic Oxygen Erosion of Hubble Space Telescope Aluminized-Teflon Thermal Shields

    NASA Technical Reports Server (NTRS)

    Guo, Aobo; Ashmead, Claire C.; deGroh, Kim K.

    2012-01-01

    When exposed to low Earth orbital (LEO) environment, external spacecraft materials degrade due to radiation, thermal cycling, micrometeoroid and debris impacts, and atomic oxygen (AO) interaction. Collisions between AO and spacecraft can result in oxidation of external spacecraft surface materials, which can lead to erosion and severe structural and/or optical property deterioration. It is therefore essential to understand the AO erosion yield (Ey), the volume loss per incident oxygen atom (cu cm/atom), of polymers to assure durability of spacecraft materials. The objective of this study was to determine whether solar radiation exposure can increase the rate of AO erosion of polymers in LEO. The material studied was a section of aluminized-Teflon (DuPont) fluorinated ethylene propylene (Al-FEP) thermal shield exposed to space on the Hubble Space Telescope (HST) for 8.25 years. Retrieved samples were sectioned from the circular thermal shield and exposed to ground laboratory thermal energy AO. The results indicate that the average Ey of the solar facing HST Al-FEP was 1.9 10(exp -24)cu cm/atom, while the average Ey of the anti-solar HST Al-FEP was 1.5 10(exp -24)cu cm/atom. The Ey of the pristine samples was 1.6- 1.7 10(exp -24)cu cm/atom. These results indicate that solar exposure affects the post-flight erosion rate of FEP in a plasma asher. Therefore, it likely affects the erosion rate while in LEO.

  7. Simultaneous observations of solar sporadic radio emission by the radio telescopes UTR-2, URAN-2 and NDA within the frequency range 8-42 MHz

    NASA Astrophysics Data System (ADS)

    Melnik, V.; Konovalenko, A.; Brazhenko, A.; Briand, C.; Dorovskyy, V.; Zarka, P.; Denis, L.; Bulatzen, V.; Frantzusenko, A.; Rucker, H.; Stanislavskyy, A.

    2012-09-01

    From 25 June till 12 August 2011 sporadic solar radio emission was observed simultaneously by three separate radio telescopes: UTR-2 (Kharkov, Ukraine), URAN-2 (Poltava, Ukraine) and NDA (Nancay, France). During these observations some interesting phenomena were observed. Some of them are discussed in this paper.

  8. Feasibility study of a layer-oriented wavefront sensor for solar telescopes: reply.

    PubMed

    Marino, Jose; Wöger, Friedrich

    2014-11-10

    We appreciate the thoughtful comments by Kellerer [Appl. Opt.53, 7643 (2014)10.1364/AO.53.007643] to our recent study [Appl. Opt.53, 685 (2014)10.1364/AO.53.000685] in which we evaluate the practicability of a layer-oriented wavefront sensing approach suggested for use in solar multiconjugate adaptive optics. After careful review of Kellerer's comment, we remain cautious about the feasibility of a solar-layer-oriented Shack-Hartmann wavefront sensor. However, we strongly encourage further analysis and proof-of-concept work that addresses the difficulties outlined in our original paper and that demonstrates the operating principles behind such an instrument.

  9. Doppler winds mapped around the lower thermospheric terminator of Venus: 2012 solar transit observations from the James Clerk Maxwell Telescope

    NASA Astrophysics Data System (ADS)

    Clancy, R. Todd; Sandor, Brad J.; Hoge, James

    2015-07-01

    Doppler shifts of sub-millimeter 12 CO (346 GHz) and 13 CO (330 GHz) and millimeter 12 CO (230 GHz) line absorptions were mapped around the circum-disk terminator of Venus before, during, and after the June 5, 2012 solar transit, employing the James Clerk Maxwell Telescope (JCMT). Radiative transfer analysis of the solar transit 12 CO thermal line absorptions yields cross-terminator winds in the Venus lower thermosphere (100-120 km) over the local time (LT) and latitude extent of the atmospheric limb presented by the inferior conjunction, nightside apparent disk of Venus. The unique solar transit geometry provides enhanced spatial resolution of the terminator (0.2 h in local time, LT) associated with solar illumination of this atmospheric limb region, and so provides the first characterization of the instantaneous distribution of cross terminator flow in the Venus lower thermosphere versus LT and latitude. Furthermore, by mapping Doppler winds over the nightside disk preceding and following the solar transit, we place the highly variable zonal and subsolar-to-antisolar (SSAS) circulation components of the nightside lower thermosphere (Clancy, R.T., Sandor, B.J., Moriarty-Schieven, G.H. [2012a]. Icarus 217, 794-812) in the context of the day-to-night cross terminator flow that drives this chaotic nightside dynamical regime. The solar transit observations indicate substantially supersonic (200-300 m/s) day-to-night cross terminator winds that are significantly (by 50-150 m/s) stronger over the evening versus the morning terminator. They also exhibit surprisingly large (50%) variations over a 1-2 h timescale that challenge explanation. These behaviors likely contribute to both the variability and the apparent retrograde zonal component of circulation in the Venus nightside upper atmosphere. Hence, these observations support dynamical arguments for preferential deceleration of the morning sector SSAS circulation (e.g., Alexander, M.J. [1992]. Geophys. Res. Lett. 19

  10. Search and study of electrostatic discharges in the Solar System with the radio telescope UTR-2

    NASA Astrophysics Data System (ADS)

    Zakharenko, V.; Mylostna, K.; Konovalenko, A.; Kolyadin, V.; Zarka, P.; Griessmeier, J.-M.; Litvinenko, G.; Sidorchuk, M.; Rucker, H.; Fischer, G.; Cecconi, B.; Coffre, A.; Denis, L.; Shevchenko, V.; Nikolaenko, V.

    2012-09-01

    Successful ground-based detection of Saturn's lightning despite terrestrial interferences is the necessary basis for further detailed study of their characteristics. Modern observational equipment provide high temporal and spectral resolution and allows to resolve the fine structure of lightning. Also it give us a hope to detect much weaker electrostatic discharges in the atmospheres of another planets of the Solar System.

  11. Telescoping in on the Microscopic Origins of the Fast Solar Wind

    NASA Astrophysics Data System (ADS)

    Cranmer, S. R.

    2011-12-01

    Despite many years of study, the basic physical processes that are responsible for producing the solar wind are not known (or at least not universally agreed upon). The fact that we have an overabundance of proposed ideas for solving the problems of coronal heating and wind acceleration can be seen as both a blessing and a curse. It is a blessing because it highlights the insight and creativity of the community, but it is a curse because we still do not know how to validate or falsify many of these ideas. Discerning the presence of any given proposed mechanism is difficult not only because measurements are limited, but also because many of the suggested processes act on a wide range of spatial scales (from centimeters to solar radii) with complex feedback effects that are not yet understood. This presentation will discuss a few key examples and controversies regarding the importance of small spatial and temporal scales in the regions where the solar wind is accelerated. For example, new observations have led to a revived debate about whether the hot plasma in the solar wind is injected dynamically from cooler regions below or whether it "evaporates" from the combined effects of radiation and conduction from above. There is also debate about how the open field lines are energized: Is the energy input from waves and turbulent eddies that propagate up from the Sun and dissipate, or is the constantly evolving magnetic carpet responsible for heating the plasma via reconnection? In some areas, traditional observational diagnostics of magnetohydrodynamic plasma properties may not be sufficient to distinguish between competing predictions. Thus, this presentation will also describe why it is probably wise to confront the truly microscopic (nonlinear, non-Maxwellian, collisionless) nature of the relevant particles and fields. Theories and measurements that "zoom in" to this level of kinetic detail have the greatest potential for improving our understanding of the origins of

  12. Observations of Oppositely Directed Umbral Wavefronts Rotating in Sunspots Obtained from the New Solar Telescope of BBSO

    NASA Astrophysics Data System (ADS)

    Su, J. T.; Ji, K. F.; Cao, W.; Banerjee, D.; Priya, T. G.; Zhao, J. S.; Bai, X. Y.; Chen, J.; Zhang, M.; Ji, H. S.

    2016-02-01

    We study the umbral waves as observed by chromospheric imaging observations of two sunspots with the New Solar Telescope at the Big Bear Solar Observatory. We find that the wavefronts (WFs) rotate clockwise and form a one-armed spiral structure in the first sunspot, whereas two- and three-armed structures arise in the second sunspot where the WFs rotate anticlockwise and clockwise alternately. All the spiral arms display propagation outwards and become running penumbral waves once they cross the umbral boundaries, suggesting that the umbral and penumbral waves propagate along the same inclined field lines. We propose that the one-armed spiral structure may be produced by the WF reflections at the chromospheric umbral light bridge, and the multi-armed spirals may be related to the twist of the magnetic field in the umbra. Additionally, the time lag of the umbral oscillations in between the data of He i 10830 Å and {{H}}α -0.4 Å is ∼17 s, and it is ∼60 s for that in between the data of 304 Å and {{H}}α -0.4 Å. This indicates that these disturbances are slow magnetoacoustic waves in nature, and that they propagate upward along the inclined lines with fast radial expansions causing horizontal velocities of the running waves.

  13. Observations of the structure and evolution of solar flares with a soft X-ray telescope

    NASA Technical Reports Server (NTRS)

    Vorpahl, J. A.; Gibson, E. G.; Landecker, P. B.; Mckenzie, D. L.; Underwood, J. M.

    1975-01-01

    Soft X ray flare events were observed with the S-056 X-ray telescope that was part of the ATM complement of instruments aboard SKYLAB. Analyses of these data are reported. The observations are summarized and a detailed discussion of the X-ray flare structures is presented. The data indicated that soft X-ray emitted by a flare come primarily from an intense well-defined core surrounded by a region of fainter, more diffuse emission. An analysis of flare evolution indicates evidence for preliminary heating and energy release prior to the main phase of the flare. Core features are found to be remarkably stable and retain their shape throughout a flare. Most changes in the overall configuration seem to be result of the appearance, disappearance or change in brightness of individual features, rather than the restructuring or reorientation of these features. Brief comparisons with several theories are presented.

  14. Simultaneous observations of solar plage with the solar extreme ultraviolet rocket telescope and spectrograph (SERTS), the VLA, and the Kitt Peak magnetograph

    NASA Technical Reports Server (NTRS)

    Brosius, Jeffrey W.; Davila, Joseph M.; Thompson, William T.; Thomas, Roger J.; Holman, Gordon D.; Gopalswamy, N.; White, Stephen M.; Kundu, Mukul R.; Jones, Harrison P.

    1993-01-01

    We obtained simultaneous images of solar plage on 1991, May 7 with SERTS, the VLA,4 and the NASA/National Solar Observatory spectromagnetograph at the NSO/Kitt Peak Vacuum Telescope. Using intensity ratios of Fe XVI to Fe XV emission lines, we find that the coronal plasma temperature is (2.3-2.9) x 10 exp 6 K throughout the region. The column emission measure ranges from 2.5 x 10 exp 27 to l.3 x 10 exp 28 cm exp -5. The calculated structure and intensity of the 20 cm wavelength thermal bremsstrahlung emission from the hot plasma observed by SERTS is quite similar to the observed structure and intensity of the 20 cm microwave emission observed by the VLA. Using the Meyer (1991, 1992) revised coronal iron abundance, we find no evidence either for cool absorbing plasma or for contributions from thermal gyroemission. Using the observed microwave polarization and the SERTS plasma parameters, we calculate a map of the coronal longitudinal magnetic field. The resulting values, about 30-60 G, are comparable to extrapolated values of the potential field at heights of 5000 and 10,000 km.

  15. RESOLVING THE FAN-SPINE RECONNECTION GEOMETRY OF A SMALL-SCALE CHROMOSPHERIC JET EVENT WITH THE NEW SOLAR TELESCOPE

    SciTech Connect

    Zeng, Zhicheng; Chen, Bin; Goode, Philip R.; Cao, Wenda; Ji, Haisheng

    2016-03-01

    Jets are ubiquitously present in both quiet and active regions on the Sun. They are widely believed to be driven by magnetic reconnection. A fan-spine structure has been frequently reported in some coronal jets and flares, and has been regarded as a signature of ongoing magnetic reconnection in a topology consisting of a magnetic null connected by a fan-like separatrix surface and a spine. However, for small-scale chromospheric jets, clear evidence of such structures is rather rare, although it has been implied in earlier works that showed an inverted-Y-shaped feature. Here we report high-resolution (0.″16) observations of a small-scale chromospheric jet obtained by the New Solar Telescope (NST) using 10830 Å filtergrams. Bi-directional flows were observed across the separatrix regions in the 10830 Å images, suggesting that the jet was produced due to magnetic reconnection. At the base of the jet, a fan-spine structure was clearly resolved by the NST, including the spine and the fan-like surface, as well as the loops before and after the reconnection. A major part of this fan-spine structure, with the exception of its bright footpoints and part of the base arc, was invisible in the extreme ultraviolet and soft X-ray images (observed by the Atmosphere Imaging Assembly and the X-Ray Telescope, respectively), indicating that the reconnection occurred in the upper chromosphere. Our observations suggest that the evolution of this chromospheric jet is consistent with a two-step reconnection scenario proposed by Török et al.

  16. HILT - A heavy ion large area proportional counter telescope for solar and anomalous cosmic rays

    NASA Technical Reports Server (NTRS)

    Klecker, Berndt; Hovestadt, Dietrich; Scholer, M.; Arbinger, H.; Ertl, M.; Kaestle, H.; Kuenneth, E.; Laeverenz, P.; Seidenschwang, E.; Blake, J. B.

    1993-01-01

    The HILT sensor has been designed to measure heavy ion elemental abundances, energy spectra, and direction of incidence in the mass range from He to Fe and in the energy range 4 to 250 MeV/nucleon. With its large geometric factor of 60 sq cm sr the sensor is optimized to provide compositional and spectral measurements for low intensity cosmic rays (i.e. for small solar energetic particle events and for the anomalous component of cosmic rays). The instrument combines a large area ion drift chamber-proportional counter system with two arrays of 16 Li-drift solid state detectors and 16 CsI crystals. The multi dE/dx-E technique provides a low background mass and energy determination. The sensor also measures particle direction. Combining these measurements with the information on the spacecraft position and attitude in the low-altitude polar orbit, it will be possible to infer the ionic charge of the ions from the local cutoff of the Earth's magnetic field. The ionic charge in this energy range is of particular interest because it provides unique clues to the origin of these particles and has not been investigated systematically so far. Together with the other instruments on board SAMPEX (LEICA, MAST, and PET), a comprehensive measurement of the entire solar and anomalous particle population will be achieved.

  17. DISCOVERY OF FINELY STRUCTURED DYNAMIC SOLAR CORONA OBSERVED IN THE Hi-C TELESCOPE

    SciTech Connect

    Winebarger, Amy R.; Cirtain, Jonathan; Savage, Sabrina; Alexander, Caroline; Golub, Leon; DeLuca, Edward; Schuler, Timothy

    2014-05-20

    In the Summer of 2012, the High-resolution Coronal Imager (Hi-C) flew on board a NASA sounding rocket and collected the highest spatial resolution images ever obtained of the solar corona. One of the goals of the Hi-C flight was to characterize the substructure of the solar corona. We therefore examine how the intensity scales from AIA resolution to Hi-C resolution. For each low-resolution pixel, we calculate the standard deviation in the contributing high-resolution pixel intensities and compare that to the expected standard deviation calculated from the noise. If these numbers are approximately equal, the corona can be assumed to be smoothly varying, i.e., have no evidence of substructure in the Hi-C image to within Hi-C's ability to measure it given its throughput and readout noise. A standard deviation much larger than the noise value indicates the presence of substructure. We calculate these values for each low-resolution pixel for each frame of the Hi-C data. On average, 70% of the pixels in each Hi-C image show no evidence of substructure. The locations where substructure is prevalent is in the moss regions and in regions of sheared magnetic field. We also find that the level of substructure varies significantly over the roughly 160 s of the Hi-C data analyzed here. This result indicates that the finely structured corona is concentrated in regions of heating and is highly time dependent.

  18. The Substructure of the Solar Corona Observed in the Hi-C Telescope

    NASA Technical Reports Server (NTRS)

    Winebarger, A.; Cirtain, J.; Golub, L.; DeLuca, E.; Savage, S.; Alexander, C.; Schuler, T.

    2014-01-01

    In the summer of 2012, the High-resolution Coronal Imager (Hi-C) flew aboard a NASA sounding rocket and collected the highest spatial resolution images ever obtained of the solar corona. One of the goals of the Hi-C flight was to characterize the substructure of the solar corona. We therefore calculate how the intensity scales from a low-resolution (AIA) pixels to high-resolution (Hi-C) pixels for both the dynamic events and "background" emission (meaning, the steady emission over the 5 minutes of data acquisition time). We find there is no evidence of substructure in the background corona; the intensity scales smoothly from low-resolution to high-resolution Hi-C pixels. In transient events, however, the intensity observed with Hi-C is, on average, 2.6 times larger than observed with AIA. This increase in intensity suggests that AIA is not resolving these events. This result suggests a finely structured dynamic corona embedded in a smoothly varying background.

  19. Discovery of Finely Structured Dynamic Solar Corona Observed in the Hi-C Telescope

    NASA Technical Reports Server (NTRS)

    Winebarger, A.; Cirtain, J.; Golub, L.; DeLuca, E.; Savage, S.; Alexander, C.; Schuler, T.

    2014-01-01

    In the summer of 2012, the High-resolution Coronal Imager (Hi-C) flew aboard a NASA sounding rocket and collected the highest spatial resolution images ever obtained of the solar corona. One of the goals of the Hi-C flight was to characterize the substructure of the solar corona. We therefore examine how the intensity scales from AIA resolution to Hi-C resolution. For each low-resolution pixel, we calculate the standard deviation in the contributing high-resolution pixel intensities and compare that to the expected standard deviation calculated from the noise. If these numbers are approximately equal, the corona can be assumed to be smoothly varying, i.e. have no evidence of substructure in the Hi-C image to within Hi-C's ability to measure it given its throughput and readout noise. A standard deviation much larger than the noise value indicates the presence of substructure. We calculate these values for each low-resolution pixel for each frame of the Hi-C data. On average, 70 percent of the pixels in each Hi-C image show no evidence of substructure. The locations where substructure is prevalent is in the moss regions and in regions of sheared magnetic field. We also find that the level of substructure varies significantly over the roughly 160 s of the Hi-C data analyzed here. This result indicates that the finely structured corona is concentrated in regions of heating and is highly time dependent.

  20. Thermal Properties of A Solar Coronal Cavity Observed with the X-Ray Telescope on Hinode

    NASA Technical Reports Server (NTRS)

    Reeves, Katherine K.; Gibson, Sarah E.; Kucera, Theresa A.; Hudson, Hugh S.; Kano, Ryouhei

    2011-01-01

    Coronal cavities are voids in coronal emission often observed above high latitude filament channels. Sometimes, these cavities have areas of bright X-ray emission in their centers. In this study, we use data from the X-ray Telescope (XRT) on the Hinode satellite to examine the thermal emission properties of a cavity observed during July 2008 that contains bright X-ray emission in its center. Using ratios of XRT filters, we find evidence for elevated temperatures in the cavity center. The area of elevated temperature evolves from a ring-shaped structure at the beginning of the observation, to an elongated structure two days later, finally appearing as a compact round source four days after the initial observation. We use a morphological model to fit the cavity emission, and find that a uniform structure running through the cavity does not fit the observations well. Instead, the observations are reproduced by modeling several short cylindrical cavity "cores" with different parameters on different days. These changing core parameters may be due to some observed activity heating different parts of the cavity core at different times. We find that core temperatures of 1.75 MK, 1.7 MK and 2.0 MK (for July 19, July 21 and July 23, respectively) in the model lead to structures that are consistent with the data, and that line-of-sight effects serve to lower the effective temperature derived from the filter ratio.

  1. Mass and Energy of Erupting Solar Plasma Observed with the X-Ray Telescope on Hinode

    NASA Astrophysics Data System (ADS)

    Lee, Jin-Yi; Raymond, John C.; Reeves, Katharine K.; Moon, Yong-Jae; Kim, Kap-Sung

    2015-01-01

    We investigate seven eruptive plasma observations by Hinode/XRT. Their corresponding EUV and/or white light coronal mass ejection features are visible in some events. Five events are observed in several passbands in X-rays, which allows for the determination of the eruptive plasma temperature using a filter ratio method. We find that the isothermal temperatures vary from 1.6 to 10 MK. These temperatures are an average weighted toward higher temperature plasma. We determine the mass constraints of eruptive plasmas by assuming simplified geometrical structures of the plasma with isothermal plasma temperatures. This method provides an upper limit to the masses of the observed eruptive plasmas in X-ray passbands since any clumping causes the overestimation of the mass. For the other two events, we assume the temperatures are at the maximum temperature of the X-ray Telescope (XRT) temperature response function, which gives a lower limit of the masses. We find that the masses in XRT, ~3 × 1013-5 × 1014 g, are smaller in their upper limit than the total masses obtained by LASCO, ~1 × 1015 g. In addition, we estimate the radiative loss, thermal conduction, thermal, and kinetic energies of the eruptive plasma in X-rays. For four events, we find that the thermal conduction timescales are much shorter than the duration of eruption. This result implies that additional heating during the eruption may be required to explain the plasma observations in X-rays for the four events.

  2. X-ray spectrometer spectrograph telescope system. [for solar corona study

    NASA Technical Reports Server (NTRS)

    Bruner, E. C., Jr.; Acton, L. W.; Brown, W. A.; Salat, S. W.; Franks, A.; Schmidtke, G.; Schweizer, W.; Speer, R. J.

    1979-01-01

    A new sounding rocket payload that has been developed for X-ray spectroscopic studies of the solar corona is described. The instrument incorporates a grazing incidence Rowland mounted grating spectrograph and an extreme off-axis paraboloic sector feed system to isolate regions of the sun of order 1 x 10 arc seconds in size. The focal surface of the spectrograph is shared by photographic and photoelectric detection systems, with the latter serving as a part of the rocket pointing system control loop. Fabrication and alignment of the optical system is based on high precision machining and mechanical metrology techniques. The spectrograph has a resolution of 16 milliangstroms and modifications planned for future flights will improve the resolution to 5 milliangstroms, permitting line widths to be measured.

  3. Development of the remote diagnosis system of the solar radio telescope

    NASA Astrophysics Data System (ADS)

    Kawashima, Susumu; Shinohara, Noriyuki; Sekiguchi, Hideaki

    2005-04-01

    "The remote diagnosis system" which we have developed is the one to monitor the operation conditions of two systems of solar radio observation (Nobeyama Radioheliograph and Nobeyama Radio Polarimeters) from the remote place. Under the condition of very limited human power, it is necessary to minimize the load of observers without degrading data quality. Thereupon, we have mulled measures to alleviate the load of observers, and worked out "the remote diagnosis system" which enables us to monitor the operation conditions and detect troubles, if any, in early stages, even if we are away from the observatory building where control system are concentrated. The plan was materialized by adopting an access through the INTERNET to the section where needed information for diagnosis is gathered.

  4. Multi-wavelength Study of Transition Region Penumbral Bright Dots Using Interface Region Imaging Spectrograph and New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Deng, Na; Yurchyshyn, Vasyl B.; Tian, Hui; Kleint, Lucia; Liu, Chang; Xu, Yan; Wang, Haimin

    2016-05-01

    Using high-resolution transition region (TR) observations taken by the Interface Region Imaging Spectrograph (IRIS) mission, Tian et al. (2014b) revealed numerous short-lived sub-arcsecond bright dots above sunspots (mostly located in the penumbrae), which indicate yet unexplained small-scale energy releases. Moreover, whether these TR brightenings have any signature in the lower atmosphere and how they are formed are still not fully resolved. This paper presents a study of these bright dots using a coordinated observation of a near disk-center sunspot with IRIS and the 1.6 m New Solar Telescope (NST) at the Big Bear Solar Observatory. NST provides high-resolution chromospheric and photospheric observations with narrow-band H-alpha imaging spectroscopy and broad-band TiO images, respectively, complementary to IRIS TR observations. A total of 2692 TR penumbral bright dots are identified from a 37-minute time series of IRIS 1400 A slitjaw images. Their locations tend to be associated more with downflowing and darker fibrils in the chromosphere, and weakly associated with bright penumbral features in the photosphere. However, temporal evolution analyses of the dots show that there is no consistent and convincing brightening response in the chromosphere. These results are compatible with a formation mechanism of the TR penumbral bright dots by falling plasma from coronal heights along more vertical and dense magnetic loops. The dots may also be produced by small-scale impulsive magnetic reconnection taking place sufficiently high in the atmosphere that has no energy release in the chromosphere.Acknowledgement: This work is mainly supported by NASA grants NNX14AC12G, NNX13AF76G and by NSF grant AGS 1408703.

  5. Rantiga Osservatorio, Tincana (MPC-D03): Observations and searching for small Solar System bodies using a remotely controlled telescope

    NASA Astrophysics Data System (ADS)

    Zolnowski, M.; Kusiak, M.

    2014-07-01

    Rantiga Osservatorio is the first Polish project aimed at discovering and observing small solar-system objects, including near-Earth objects and comets. The observatory officially started in March 2012, as a result of cooperation between two amateur astronomers: Michal Zolnowski and Michal Kusiak. Subsequently, our station received official designation D03 assigned by the IAU's Minor Planet Center. The equipment is installed in northern Italy, on the border between Emilia-Romagna and Tuscany, in the small village of Tincana at an altitude of 643 m. The heart of the observatory is a 0.4-meter reflector f/3.8, mounted on Paramount ME and CCD camera SBIG STX-16803. The equipment is controlled by an industrial computer connected to the internet, and software allowing for automation and remote control of the telescope from Poland. It is also the first Polish amateur observatory which has been used for the discoveries of potentially new asteroids since 1949. Between 2012 and 2013, Rantiga Osservatorio made it possible to submit over 13,000 astrometric measurements of 3,500 asteroids, and we also reported 1,151 candidates for potentially unknown objects. During our presentation, we would like to introduce details of design and several enhancements to allow a convenient and safe way to control an observing session from anywhere in the world using a smartphone.

  6. Hα Line Impact Linear Polarization Observed in the 23 July 2002 Flare with the Large Solar Vacuum Telescope (LSVT)

    NASA Astrophysics Data System (ADS)

    Firstova, N. M.; Polyakov, V. I.; Firstova, A. V.

    2012-08-01

    We present the results of studying the proton flare 2B/X4.8 on 23 July 2002, observed with the Large Solar Vacuum Telescope (LSVT) at the Baikal Astrophysical Observatory in spectropolarimetric mode with high spatial and spectral resolution. We have found some evidence for Hα line impact linear polarization, predominantly during the initial moments of the flare. For the Hα line 606 cuts were made along the dispersion in 53 spectrograms, and a polarization signal was found more or less confidently in 60 cuts (13 spectrograms). Polarization was mainly observed in one of the kernels of the flare. A particular feature of this kernel was that the Hα line was observed to show a reversal in the central part of this kernel, which created a dip in the kernel center in the photometric cut. The size of these dips and the size of the sites with the linear polarization coincide and are equal to 3 - 6 arcsec. The maximum polarization degree in this kernel reached 15 %. The direction of the polarization in the kernel is radial, except for the first two frames, where the direction of the polarization was both radial and tangential. Furthermore, we found an analogy between the effects observed at the chromospheric level in this kernel (polarization and depression in Hα line) and the temporal variation of the HXR sources.

  7. Progress in modeling polarization optical components for the Daniel K. Inouye Solar Telescope

    NASA Astrophysics Data System (ADS)

    Sueoka, Stacey Ritsuyo; Harrington, David M.

    2016-07-01

    The DKIST will have a suite of first-light polarimetric instrumentation requiring precise calibration of a complex articulated optical path. The optics are subject to large thermal loads caused by the 300Watts of collected solar irradiance across the 5 arc minute field of view. The calibration process requires stable optics to generate known polarization states. We present modeling of several optical, thermal and mechanical effects of the calibration optics, the first transmissive optical elements in the light path, because they absorb substantial heat. Previous studies showed significant angle of incidence effects from the f/13 converging beam and the 5 arc minute field of view, but were only modeled at a single nominal temperature. New thermal and polarization modeling of these calibration retarders shows heating causes significant stability limitations both in time and with field caused by the bulk temperature rise along with depth and radial thermal gradients. Modeling efforts include varying coating and material absorption, Mueller matrix stability estimates and mitigation efforts.

  8. The 26 December 2001 Solar Event Responsible for GLE63. I. Observations of a Major Long-Duration Flare with the Siberian Solar Radio Telescope

    NASA Astrophysics Data System (ADS)

    Grechnev, V. V.; Kochanov, A. A.

    2016-12-01

    Ground level enhancements (GLEs) of cosmic-ray intensity occur, on average, once a year. Because they are rare, studying the solar sources of GLEs is especially important to approach understanding their origin. The SOL2001-12-26 eruptive-flare event responsible for GLE63 seems to be challenging in some aspects. Deficient observations limited our understanding of it. Analysis of additional observations found for this event provided new results that shed light on the flare configuration and evolution. This article addresses the observations of this flare with the Siberian Solar Radio Telescope (SSRT). Taking advantage of its instrumental characteristics, we analyze the detailed SSRT observations of a major long-duration flare at 5.7 GHz without cleaning the images. The analysis confirms that the source of GLE63 was associated with an event in active region 9742 that comprised two flares. The first flare (04:30 - 05:03 UT) reached a GOES importance of about M1.6. Two microwave sources were observed, whose brightness temperatures at 5.7 GHz exceeded 10 MK. The main flare, up to an importance of M7.1, started at 05:04 UT and occurred in strong magnetic fields. The observed microwave sources reached a brightness temperature of about 250 MK. They were not static. After appearing on the weaker-field periphery of the active region, the microwave sources moved toward each other nearly along the magnetic neutral line, approaching the stronger-field core of the active region, and then moved away from the neutral line like expanding ribbons. These motions rule out an association of the non-thermal microwave sources with a single flaring loop.

  9. SYSTEMATIC MOTION OF FINE-SCALE JETS AND SUCCESSIVE RECONNECTION IN SOLAR CHROMOSPHERIC ANEMONE JET OBSERVED WITH THE SOLAR OPTICAL TELESCOPE/HINODE

    SciTech Connect

    Singh, K. A. P.; Nishida, K.; Shibata, K.; Isobe, H.

    2012-11-20

    The Solar Optical Telescope (SOT) on board Hinode allows observations with high spatiotemporal resolution and stable image quality. A {lambda}-shaped chromospheric anemone jet was observed in high resolution with SOT/Hinode. We found that several fine-scale jets were launched from one end of the footpoint to the other. These fine-scale jets ({approx}1.5-2.5 Mm) gradually move from one end of the footpoint to the other and finally merge into a single jet. This process occurs recurrently, and as time progresses the jet activity becomes more and more violent. The time evolution of the region below the jet in Ca II H filtergram images taken with SOT shows that various parts (or knots) appear at different positions. These bright knots gradually merge into each other during the maximum phase. The systematic motion of the fine-scale jets is observed when different knots merge into each other. Such morphology would arise due to the emergence of a three-dimensional twisted flux rope in which the axial component (or the guide field) appears in the later stages of the flux rope emergence. The partial appearance of the knots could be due to the azimuthal magnetic field that appears during the early stage of the flux rope emergence. If the guide field is strong and reconnection occurs between the emerging flux rope and an ambient magnetic field, this could explain the typical feature of systematic motion in chromospheric anemone jets.

  10. Systematic Motion of Fine-scale Jets and Successive Reconnection in Solar Chromospheric Anemone Jet Observed with the Solar Optical Telescope/Hinode

    NASA Astrophysics Data System (ADS)

    Singh, K. A. P.; Isobe, H.; Nishida, K.; Shibata, K.

    2012-11-01

    The Solar Optical Telescope (SOT) on board Hinode allows observations with high spatiotemporal resolution and stable image quality. A λ-shaped chromospheric anemone jet was observed in high resolution with SOT/Hinode. We found that several fine-scale jets were launched from one end of the footpoint to the other. These fine-scale jets (~1.5-2.5 Mm) gradually move from one end of the footpoint to the other and finally merge into a single jet. This process occurs recurrently, and as time progresses the jet activity becomes more and more violent. The time evolution of the region below the jet in Ca II H filtergram images taken with SOT shows that various parts (or knots) appear at different positions. These bright knots gradually merge into each other during the maximum phase. The systematic motion of the fine-scale jets is observed when different knots merge into each other. Such morphology would arise due to the emergence of a three-dimensional twisted flux rope in which the axial component (or the guide field) appears in the later stages of the flux rope emergence. The partial appearance of the knots could be due to the azimuthal magnetic field that appears during the early stage of the flux rope emergence. If the guide field is strong and reconnection occurs between the emerging flux rope and an ambient magnetic field, this could explain the typical feature of systematic motion in chromospheric anemone jets.

  11. Sub-arcsec X-Ray Telescope for Imaging The Solar Corona In the 0.25 - 1.2 keV Band

    NASA Technical Reports Server (NTRS)

    Gallagher, Dennis; Cash, Webster; Jelsma, Schuyler; Farmer, Jason

    1996-01-01

    We have developed an X-ray telescope that uses a new technique for focusing X-rays with grazing incidence optics. The telescope was built with spherical optics for all of its components, utilizing the high quality surfaces obtainable when polishing spherical (as opposed to aspherical) optics. We tested the prototype X-ray telescope in the 300 meter vacuum pipe at White Sands Missile Range, NM. The telescope features 2 degee graze angles with tungsten coatings, yielding a bandpass of 0.25-1.5 keV with a peak effective area of 0.8 sq cm at 0.83 keV. Results from X-ray testing at energies of 0.25 keV and 0.93 keV (C-K and Cu-L) verify 0.5 arcsecond performance at 0.93 keV. Results from modeling the X-ray telescope's response to the Sun show that the current design would be capable of recording 10 half arcsecond images of a solar active region during a 300 second NASA sounding rocket flight.

  12. ATST telescope mount: telescope of machine tool

    NASA Astrophysics Data System (ADS)

    Jeffers, Paul; Stolz, Günter; Bonomi, Giovanni; Dreyer, Oliver; Kärcher, Hans

    2012-09-01

    The Advanced Technology Solar Telescope (ATST) will be the largest solar telescope in the world, and will be able to provide the sharpest views ever taken of the solar surface. The telescope has a 4m aperture primary mirror, however due to the off axis nature of the optical layout, the telescope mount has proportions similar to an 8 meter class telescope. The technology normally used in this class of telescope is well understood in the telescope community and has been successfully implemented in numerous projects. The world of large machine tools has developed in a separate realm with similar levels of performance requirement but different boundary conditions. In addition the competitive nature of private industry has encouraged development and usage of more cost effective solutions both in initial capital cost and thru-life operating cost. Telescope mounts move relatively slowly with requirements for high stability under external environmental influences such as wind buffeting. Large machine tools operate under high speed requirements coupled with high application of force through the machine but with little or no external environmental influences. The benefits of these parallel development paths and the ATST system requirements are being combined in the ATST Telescope Mount Assembly (TMA). The process of balancing the system requirements with new technologies is based on the experience of the ATST project team, Ingersoll Machine Tools who are the main contractor for the TMA and MT Mechatronics who are their design subcontractors. This paper highlights a number of these proven technologies from the commercially driven machine tool world that are being introduced to the TMA design. Also the challenges of integrating and ensuring that the differences in application requirements are accounted for in the design are discussed.

  13. Solar astronomy

    NASA Technical Reports Server (NTRS)

    Rosner, Robert; Noyes, Robert; Antiochos, Spiro K.; Canfield, Richard C.; Chupp, Edward L.; Deming, Drake; Doschek, George A.; Dulk, George A.; Foukal, Peter V.; Gilliland, Ronald L.

    1991-01-01

    An overview is given of modern solar physics. Topics covered include the solar interior, the solar surface, the solar atmosphere, the Large Earth-based Solar Telescope (LEST), the Orbiting Solar Laboratory, the High Energy Solar Physics mission, the Space Exploration Initiative, solar-terrestrial physics, and adaptive optics. Policy and related programmatic recommendations are given for university research and education, facilitating solar research, and integrated support for solar research.

  14. Study of Solar-Terrestrial Connections in the Highlight of Simultaneous Observations with STEREO and UTR-2, URAN, NDA Ground-Based Radio Telescopes

    NASA Astrophysics Data System (ADS)

    Melnik, V. N.; Rucker, H. O.; Konovalenko, A. A.; Lecacheux, A.; Falkovich, I. S.

    In the present paper new opportunities, which will be appeared at simultaneous observations by STEREO and ground-based radio telescopes (UTR-2, URAN, NDA), in study of solar sporadic phenomena, having essential effects on the Earth, are discussed. CMEs, which manifest themselves in radio emission as Type II and Type IY bursts, are the most important of them. Studying of these bursts during simultaneous observations with the help of STEREO and ground-based radio telescopes will allow to find the direction of CME movement, 3D images of CME, its beaming pattern, bulk energy of both CME and shock before it, particle acceleration sites and directions of propagation of accelerated particles. Analyses of radio observations of active and quiet Sun will allow to understand pre-CME conditions in the solar corona and will give an opportunity to forecast CME appearance. Observations of different types of sporadic radio emissions (Type III bursts, drift pairs, s-bursts, bursts in absorption etc.) with high sensitivity, high frequency and time resolutions in decameter range by ground-based radio telescopes and detection of regions, where this radio emission goes out from (using STEREO results), will allow to diagnose the coronal plasmas (to define their density, magnetic fields, parameters of inhomogenieties) at altitudes 0.5-2Rs and to build adequate model of CME formation and its evolution. Using of interplanetary scintillation methods tested on UTR-2 and URAN radio telescope as well as in situ measurements on STEREO will give the information about both CME structure and shock associated with it, about spectra of density fluctuations and turbulences connected with CME at distances about 1a.u. from the Sun.

  15. Depth-dependent global properties of a sunspot observed by Hinode using the Solar Optical Telescope/Spectropolarimeter

    NASA Astrophysics Data System (ADS)

    Tiwari, Sanjiv K.; van Noort, Michiel; Solanki, Sami K.; Lagg, Andreas

    2015-11-01

    Context. For the past two decades, the three-dimensional structure of sunspots has been studied extensively. A recent improvement in the Stokes inversion technique prompts us to revisit the depth-dependent properties of sunspots. Aims: In the present work, we aim to investigate the global depth-dependent thermal, velocity, and magnetic properties of a sunspot, as well as the interconnection between various local properties. Methods: We analysed high-quality Stokes profiles of the disk-centred, regular, leading sunspot of NOAA AR 10933, acquired by the Solar Optical Telescope/Spectropolarimeter (SOT/SP) on board the Hinode spacecraft. To obtain depth-dependent stratification of the physical parameters, we used the recently developed, spatially coupled version of the SPINOR inversion code. Results: First, we study the azimuthally averaged physical parameters of the sunspot. We find that the vertical temperature gradient in the lower- to mid-photosphere is at its weakest in the umbra, while it is considerably stronger in the penumbra, and stronger still in the spot's surroundings. The azimuthally averaged field becomes more horizontal with radial distance from the centre of the spot, but more vertical with height. At continuum optical depth unity, the line-of-sight velocity shows an average upflow of ~300 ms-1 in the inner penumbra and an average downflow of ~1300 ms-1 in the outer penumbra. The downflow continues outside the visible penumbral boundary. The sunspot shows, at most, a moderate negative twist of <5° at log (τ) = 0, which increases with height. The sunspot umbra and the spines of the penumbra show considerable similarity with regard to their physical properties, albeit with some quantitative differences (weaker, somewhat more horizontal fields in spines, commensurate with their location being further away from the sunspot's core). The temperature shows a general anti-correlation with the field strength, with the exception of the heads of penumbral

  16. Space Infrared Telescope Facility (SIRTF) telescope overview

    NASA Technical Reports Server (NTRS)

    Schember, Helene; Manhart, Paul; Guiar, Cecilia; Stevens, James H.

    1991-01-01

    The Space Infrared Telescope Facility (SIRTF) will be the first true infrared observatory in space, building upon the technical and scientific experience gained through its two NASA survey-oriented predecessors: the Infrared Astronomical Satellite and the Cosmic Background Explorer. During its minimum five year lifetime, the SIRTF will perform pointed scientific observations at wavelengths from 1.8 to 1200 microns with an increase in sensitivity over previous missions of several orders of magnitude. This paper discusses a candidate design for the SIRTF telescope, encompassing optics, cryostat, and instrument accommodation, which has been undertaken to provide a fulcrum for the development of functional requirements, interface definition, risk assessment and cost. The telescope optics employ a baffled Ritchey-Chretien Cassegrain system with a 1-m class primary mirror, an active secondary mirror, and a stationary facetted tertiary mirror. The optics are embedded in a large superfluid He cryostat designed to maintain the entire telescope-instrument system at temperatures below 3 K.

  17. Hubble Space Telescope

    NASA Technical Reports Server (NTRS)

    1990-01-01

    An overview of the mission of the Hubble Space Telescope, a joint project between NASA and the European Space Agency which will be used to study deep space, as well as our solar system is presented. The video contains animations depicting the Hubble Space Telescope in orbit, as well as footage of scientists at the Space Telescope Science Institute making real time observations. The images Hubble acquires will be downloaded into a database that contains images of over 19,000,000 celestial objects called the Star Catalog.

  18. Space Telescope.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Huntsville, AL. George C. Marshall Space Flight Center.

    This pamphlet describes the Space Telescope, an unmanned multi-purpose telescope observatory planned for launch into orbit by the Space Shuttle in the 1980s. The unique capabilities of this telescope are detailed, the major elements of the telescope are described, and its proposed mission operations are outlined. (CS)

  19. Toward Active X-ray Telescopes II

    NASA Technical Reports Server (NTRS)

    O'Dell, Stephen L.; Aldroft, Thomas L.; Atkins, Carolyn; Button, Timothy W.; Cotroneo, Vincenzo; Davis, William N.; Doel, Peter; Feldman, Charlotte H.; Freeman, Mark D.; Gubarev, Mikhail V.; Johnson-Wilke, Raegan L.; Kolodziejczak, Jeffery J.; Lillie, Charles F.; Michette, Alan G.; Ramsey, Brian D.; Reid, Paul B.; Sanmartin, Daniel Rodriguez; Saha, Timo T.; Schwartz, Daniel A.; Trolier-McKinstry, Susan E.; Ulmer, Melville P.; Wilke, Rudeger H. T.; Willingale, Richard; Zhang, William W.

    2012-01-01

    In the half century since the initial discovery of an astronomical (non-solar) x-ray source, the sensitivity for detection of cosmic x-ray sources has improved by ten orders of magnitude. Largely responsible for this dramatic progress has been the refinement of the (grazing-incidence) focusing x-ray telescope. The future of x-ray astronomy relies upon the development of x-ray telescopes with larger aperture areas (greater than 1 m2) and finer angular resolution (less than 1.). Combined with the special requirements of grazing-incidence optics, the mass and envelope constraints of space-borne telescopes render such advances technologically challenging.requiring precision fabrication, alignment, and assembly of large areas (greater than 100 m2) of lightweight (approximately 1 kg m2 areal density) mirrors. Achieving precise and stable alignment and figure control may entail active (in-space adjustable) x-ray optics. This paper discusses relevant programmatic and technological issues and summarizes progress toward active x-ray telescopes.

  20. High resolution telescope

    DOEpatents

    Massie, Norbert A.; Oster, Yale

    1992-01-01

    A large effective-aperture, low-cost optical telescope with diffraction-limited resolution enables ground-based observation of near-earth space objects. The telescope has a non-redundant, thinned-aperture array in a center-mount, single-structure space frame. It employs speckle interferometric imaging to achieve diffraction-limited resolution. The signal-to-noise ratio problem is mitigated by moving the wavelength of operation to the near-IR, and the image is sensed by a Silicon CCD. The steerable, single-structure array presents a constant pupil. The center-mount, radar-like mount enables low-earth orbit space objects to be tracked as well as increases stiffness of the space frame. In the preferred embodiment, the array has elemental telescopes with subaperture of 2.1 m in a circle-of-nine configuration. The telescope array has an effective aperture of 12 m which provides a diffraction-limited resolution of 0.02 arc seconds. Pathlength matching of the telescope array is maintained by an electro-optical system employing laser metrology. Speckle imaging relaxes pathlength matching tolerance by one order of magnitude as compared to phased arrays. Many features of the telescope contribute to substantial reduction in costs. These include eliminating the conventional protective dome and reducing on-site construction activites. The cost of the telescope scales with the first power of the aperture rather than its third power as in conventional telescopes.

  1. Simultaneous observations of solar sporadic radio emission by the radio telescopes UTR-2, URAN-2 and NDA within the frequency range 8-41MHz

    NASA Astrophysics Data System (ADS)

    Melnik, V. N.; Konovalenko, A. A.; Rucker, H. O.; Brazhenko, A. I.; Briand, C.; Dorovskyy, V. V.; Zarka, P.; Denis, L.; Bulatzen, V. G.; Frantzusenko, A. V.; Stanislavskyy, A. A.

    2012-04-01

    From 25 June till 12 August 2011 sporadic solar radio emission was observed simultaneously by three separate radio telescopes: UTR-2 (Kharkov, Ukraine), URAN-2 (Poltava, Ukraine) and NDA (Nancay, France). During these observations several type II bursts with double and triple harmonics were registered, as well as type II bursts with complex herringbone structure. The events of particular interest were type II bursts registered on 9 and 11 August 2011. These bursts had opposite sign of circular polarization at different parts of their dynamic spectra. In our opinion we registered the emissions, which came from the different parts of the shock propagating through the solar corona. We have observed also groups of type III bursts merged into one burst, type III bursts with triple harmonics and type III bursts with "split" polarization. In addition some unusual solar bursts were registered: storms of strange narrow-band (up to 500kHz) bursts with high polarization degree (about 80%), decameter spikes of extremely short durations (200-300ms), "tadpole-like" bursts with durations of 1-2s and polarization degree up to 60%.

  2. Hubble Space Telescope Optical Telescope Assembly

    NASA Technical Reports Server (NTRS)

    1986-01-01

    This image illustrates the Hubble Space Telescope's (HST's) Optical Telescope Assembly (OTA). One of the three major elements of the HST, the OTA consists of two mirrors (a primary mirror and a secondary mirror), support trusses, and the focal plane structure. The mirrors collect and focus light from selected celestial objects and are housed near the center of the telescope. The primary mirror captures light from objects in space and focuses it toward the secondary mirror. The secondary mirror redirects the light to a focal plane where the Scientific Instruments are located. The primary mirror is 94.5 inches (2.4 meters) in diameter and the secondary mirror is 12.2 inches (0.3 meters) in diameter. The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth Orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from the Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The spacecraft is 42.5 feet (13 meters) long and weighs 25,000 pounds (11,600 kilograms). The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Cornecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  3. A Space-Based Near-Earth Object Survey Telescope in Support of Human Exploration, Solar System Science, and Planetary Defense

    NASA Technical Reports Server (NTRS)

    Abell, Paul A.

    2011-01-01

    Human exploration of near-Earth objects (NEOs) beginning in 2025 is one of the stated objectives of U.S. National Space Policy. Piloted missions to these bodies would further development of deep space mission systems and technologies, obtain better understanding of the origin and evolution of our Solar System, and support research for asteroid deflection and hazard mitigation strategies. As such, mission concepts have received much interest from the exploration, science, and planetary defense communities. One particular system that has been suggested by all three of these communities is a space-based NEO survey telescope. Such an asset is crucial for enabling affordable human missions to NEOs circa 2025 and learning about the primordial population of objects that could present a hazard to the Earth in the future.

  4. Fermi Large Area Telescope Observations of High-Energy Gamma-ray Emission From Behind-the-limb Solar Flares

    NASA Astrophysics Data System (ADS)

    Omodei, Nicola; Pesce-Rollins, Melissa; Petrosian, Vahe; Liu, Wei; Rubio da Costa, Fatima; Golenetskii, Sergei; Kashapova, Larisa; Krucker, Sam; Palshin, Valentin; Fermi Large Area Telescope Collaboration

    2017-01-01

    Fermi LAT >30 MeV observations of the active Sun have increased the number of detected solar flares by almost a factor of 10 with respect to previous space observations. Of particular interest are the recent detections of three solar flares whose position behind the limb was confirmed by the STEREO-B spacecraft. These observations sample flares from active regions originating from behind both the eastern and western limbs and include an event associated with the second ground level enhancement event (GLE) of the 24th Solar Cycle. While gamma-ray emission up to tens of MeV resulting from proton interactions has been detected before from occulted solar flares, the significance of these particular events lies in the fact that these are the first detections of >100 MeV gamma-ray emission from footpoint-occulted flares. These detections present an unique opportunity to diagnose the mechanisms of high-energy emission and particle acceleration and transport in solar flares. We will present the Fermi-LAT, RHESSI and STEREO observations of these flares and discuss the various emission scenarios for these sources.

  5. High-energy gamma-ray emission from solar flares: Summary of Fermi large area telescope detections and analysis of two M-class flares

    SciTech Connect

    Ackermann, M.; Ajello, M.; Albert, A.; Allafort, A.; Bechtol, K.; Bottacini, E.; Buehler, R.; Baldini, L.; Barbiellini, G.; Bastieri, D.; Buson, S.; Bellazzini, R.; Bregeon, J.; Bissaldi, E.; Bonamente, E.; Bouvier, A.; Brandt, T. J.; Brigida, M.; Bruel, P.; and others

    2014-05-20

    We present the detections of 18 solar flares detected in high-energy γ-rays (above 100 MeV) with the Fermi Large Area Telescope (LAT) during its first 4 yr of operation. This work suggests that particle acceleration up to very high energies in solar flares is more common than previously thought, occurring even in modest flares, and for longer durations. Interestingly, all these flares are associated with fairly fast coronal mass ejections (CMEs). We then describe the detailed temporal, spatial, and spectral characteristics of the first two long-lasting events: the 2011 March 7 flare, a moderate (M3.7) impulsive flare followed by slowly varying γ-ray emission over 13 hr, and the 2011 June 7 M2.5 flare, which was followed by γ-ray emission lasting for 2 hr. We compare the Fermi LAT data with X-ray and proton data measurements from GOES and RHESSI. We argue that the γ-rays are more likely produced through pion decay than electron bremsstrahlung, and we find that the energy spectrum of the proton distribution softens during the extended emission of the 2011 March 7 flare. This would disfavor a trapping scenario for particles accelerated during the impulsive phase of the flare and point to a continuous acceleration process at play for the duration of the flares. CME shocks are known for accelerating the solar energetic particles (SEPs) observed in situ on similar timescales, but it might be challenging to explain the production of γ-rays at the surface of the Sun while the CME is halfway to the Earth. A stochastic turbulence acceleration process occurring in the solar corona is another likely scenario. Detailed comparison of characteristics of SEPs and γ-ray-emitting particles for several flares will be helpful to distinguish between these two possibilities.

  6. Apollo Telescope Mount Illustration

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The Apollo Telescope Mount (ATM) served as the first marned astronomical observatory in space. It was designed for solar research from Earth orbit aboard the Skylab. This image is a cutaway illustration of the ATM canister with callouts and characteristics. The ATM was designed and developed by the Marshall Space Flight Center.

  7. Apollo Telescope Mount Illustration

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The Apollo Telescope Mount (ATM) served as the first marned astronomical observatory in space. It was designed for solar research from Earth orbit aboard the Skylab. This image is a cutaway illustration of the ATM canister. The ATM was designed and developed by the Marshall Space Flight Center.

  8. Apollo Telescope Mount Illustration

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The Apollo Telescope Mount (ATM) served as the first marned astronomical observatory in space. It was designed for solar research from Earth orbit aboard the Skylab. This image is a cutaway illustration of the ATM canister with callouts. The ATM was designed and developed by the Marshall Space Flight Center.

  9. Space Telescopes

    NASA Technical Reports Server (NTRS)

    Clampin, Mark; Flanagan, Kathryn A.

    2012-01-01

    Space telescopes have been a dominant force in astrophysics and astronomy over the last two decades. As Lyman Spitzer predicted in 1946, space telescopes have opened up much of the electromagnetic spectrum to astronomers, and provided the opportunity to exploit the optical performance of telescopes uncompromised by the turbulent atmosphere. This special section of Optical Engineering is devoted to space telescopes. It focuses on the design and implementation of major space observatories from the gamma-ray to far-infrared, and highlights the scientific and technical breakthroughs enabled by these telescopes. The papers accepted for publication include reviews of major space telescopes spanning the last two decades, in-depth discussions of the design considerations for visible and x-ray telescopes, and papers discussing concepts and technical challenges for future space telescopes.

  10. Hubble Space Telescope Assembly

    NASA Technical Reports Server (NTRS)

    1986-01-01

    This photograph shows the Hubble Space Telescope (HST) flight article assembly with multilayer insulation, high gain anterna, and solar arrays in a clean room of the Lockheed Missile and Space Company. The HST is the first of NASA's great observatories and the most complex and sensitive optical telescope ever made. The purpose of the HST is to study the cosmos from a low-Earth orbit by placing the telescope in space, enabling astronomers to collect data that is free of the Earth's atmosphere. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had overall responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company, Sunnyvale, California, produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  11. A search for small solar-system bodies near the earth using a ground-based telescope - Technique and observations

    NASA Technical Reports Server (NTRS)

    Frank, L. A.; Sigwarth, J. B.; Yeates, C. M.

    1990-01-01

    A large, previously undetected flux of small bodies near earth is identified by employing the standard technique of detection of an individual object in two consecutive frames. The observational periods and viewing coordinates for the search for small bodies are presented. A null test is performed in order to further demonstrate that the signatures in the images are not due to instrumental artifacts. The observed fluxes, orbital motions, and radii of the small bodies detected are in agreement with those for the small cometlike objects previously reported. It is pointed out that the radii of the small bodies would be in the range of meters. Since an alternative interpretation of the small bodies is possible, it is suggested that the use of a telescope with larger aperture and/or array detectors with lesser noise levels is necessary to confirm the present observations.

  12. The Dutch Open Telescope on La Palma

    NASA Astrophysics Data System (ADS)

    Rutten, R. J.; Bettonvil, F. C. M.; Hammerschlag, R. H.; Jägers, A. P. L.; Leenaarts, J.; Snik, F.; Sütterlin, P.; Tziotziou, K.; de Wijn, A. G.

    The Dutch Open Telescope (DOT) on La Palma is an innovative solar telescope combining open telescope structure and an open support tower with a multi-wavelength imaging assembly and with synchronous speckle cameras to generate high-resolution movies which sample different layers of the solar atmosphere simultaneously and co-spatially at high resolution over long durations. The DOT test and development phase is nearly concluded. The installation of an advanced speckle processor enables full science utilization including "Open-DOT" time allocation to the international community. Co-pointing with spectropolarimeters at other Canary Island telescopes and with TRACE furnishes valuable Solar-B precursor capabilities.

  13. LCOGT: A World-Wide Network of Robotic Telescopes

    NASA Astrophysics Data System (ADS)

    Brown, T.

    2013-05-01

    Las Cumbres Observatory Global Telescope (LCOGT) is an organization dedicated to time-domain astronomy. To carry out the necessary observations in fields such as supernovae, extrasolar planets, small solar-system bodies, and pulsating stars, we have developed and are now deploying a set of robotic optical telescopes at sites around the globe. In this talk I will concentrate on the core of this network, consisting of up to 15 identical 1m telescopes deployed across multiple sites in both the northern and southern hemispheres. I will summarize the technical and performance aspect of these telescopes, including both their imaging and their anticipated spectroscopic capabilities. But I will also delve into the network organization, including communication among telescopes (to assure that observations are properly carried out), interactions among the institutions and scientists who will use the network (to optimize the scientific returns), and our funding model (which until now has relied entirely on one private donor, but will soon require funding from outside sources, if the full potential of the network is to be achieved).

  14. Simultaneous oberservations of magnetospheric HF radio emission after Solar flare X1/3B at November 4, 2001 by use of different radio telescopes

    NASA Astrophysics Data System (ADS)

    Dudnik, O.; Yurovsky, Y.

    It is shown that the number of short-term (~1s) sporadic bursts of the near Earth space is changing at frequencies 100 - 500 MHz and depending on the time of the day as well as on the solar activity. The number of radio bursts of similar amplitude is increasing at the frequency 150 MHz when the proton density of high-speed solar wind streams is increasing. The level of radio noises was simultaneously registered during the high solar activity on November, 2001, at frequencies 280, 300, 150 and 500 MHz by radio telescopes, situated on the distance 700 km from each other. In spite of the slight differences of radio technical features of the receiving channels the simultaneous series of bursts have been observed after 3-4 hours from beginning of the strong 3B flare that took place on November 4, 2001. The comparative analysis of the fine structure of bursts registered in both places has been carried out. The obtained experimental data were compared with dynamics of electrons and protons fluxes of different energetic ranges in the interplanetary space by use the data of the ACE satellite as well as on the geostationary orbit by use the data of satellites of GOES series. The supposition was made on the basis of the carried out analyses that the source of HF radio bursts does not have long life space localization but it emerges sporadically for a short time from part of the second to several decades of seconds under the influence of the external factors. Such factors can be represented by fluxes of electrons and ions with energies 50 - 500 keV in the interplanetary space, that were generated in the powerful solar flare, or by ion-cyclotron waves of the outer part of the Earth's magnetosphere. The fine structure of bursts mostly does not coincide at different frequencies that testifies either the narrow band emission feature or the imposi g of local conditions on the radio waves propagation over the place of then bursts' receiving.

  15. Heinrich Hertz Telescope

    NASA Astrophysics Data System (ADS)

    Baars, Jacob W.; Martin, Robert N.

    1998-07-01

    The Heinrich Hertz Telescope is a radio telescope dedicated to the observation of submillimeter wavelength radiation from celestial sources. It is a Cassegrain telescope with a diameter of 10 m and a reflector accuracy of about 17 micrometer, yielding an excellent performance at 350 micrometer, the shortest wavelength transmitted through the atmosphere. The reflector panels and the backup structure employ carbon-fiber reinforced plastic as basic material to achieve a lightweight, stiff construction with a very small coefficient of thermal expansion. This enables us to maintain full performance of the telescope in day time under solar illumination of the structure. In this paper, we describe the structural and material characteristics of the telescope. We also describe the holographic method which enables a measurement and setting of the reflector panels to an accuracy of 10 micrometer. The telescope is located on Mt. Graham in Eastern Arizona at an altitude of 3250 m, providing good submillimeter observing conditions, especially in the winter months. This is a collaborative effort of the Max-Planck- Institut fur Radioastronomie, Bonn, Germany and Steward Observatory, University of Arizona, Tucson, AZ.

  16. Hubble Space Telescope: The Telescope, the Observations & the Servicing Mission

    NASA Astrophysics Data System (ADS)

    1999-11-01

    the way for other space-based observatories. How the mission was named Hubble Space Telescope is named after Edwin Powell Hubble (1889-1953), who was one of the great pioneers of modern astronomy. Industrial Involvement The ESA contribution to HST included the Solar Panels and the Faint Object Camera (FOC). Prime contractors for the FOC were Dornier (now DaimlerChrysler Aerospace, Germany), and Matra (France); for the Solar Panels British Aerospace (UK). Launch date: April 25, 1990 Launcher: Space Shuttle Discovery (STS-31) Launch mass: 11 110 kg Dimensions Length: 15.9 m, diameter: 4.2 m. In addition two solar panels each 2.4 x 12.1 m. Payload (current) A 2.4 m f/24 Ritchey-Chretien telescope with four main instruments, currently WFPC2, STIS, NICMOS and FOC. In addition the three fine-guidance sensors are used for astrometric observations (positional astronomy). WFPC2 - Wide Field/Planetary Camera 2 is an electronic camera working at two magnifications. It has four CCD detectors with 800 x 800 pixels. One of these (called Planetary Camera) has a higher resolution (<0.1 arcsecond). STIS - Space Telescope Imaging Spectrograph uses so-called MAMAs and CCDs to provide images and spectra. It is sensitive to a wide range of light from UV to Infrared. NICMOS - Near-Infrared Camera and Multi-Object Spectrometer provides images and spectra in the infrared. NICMOS uses cooled HgCdTe detectors. Currently NICMOS is dormant and awaits a new cooler to be provided during Servicing Mission 3B. FOC - Faint Object Camera - a very high resolution camera built by ESA. FOC is no longer in use and will be replaced by the new Advanced Camera for Surveys (ACS) during Servicing Mission 3B. Orbit Circular, 593 km with a 28.5 degree inclination. Operations Science operations are co-ordinated and conducted by the Space Telescope Science Institute (STScI) in Baltimore. Overall management of daily on-orbit operations is carried out by NASA's Goddard Space Flight Center (GSFC) in Greenbelt. Ground

  17. Telescope Equipment

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Renaissance Telescope for high resolution and visual astronomy has five 82-degree Field Tele-Vue Nagler Eyepieces, some of the accessories that contribute to high image quality. Telescopes and eyepieces are representative of a family of optical equipment manufactured by Tele-Vue Optics, Inc.

  18. The front-end electronics of the Spectrometer Telescope for Imaging X-Rays (STIX) on the ESA Solar Orbiter satellite

    NASA Astrophysics Data System (ADS)

    Grimm, O.; Bednarzik, M.; Commichau, V.; Graczyk, R.; Gröbelbauer, H. P.; Hurford, G.; Krucker, S.; Limousin, O.; Meuris, A.; Orleański, P.; Przepiórka, A.; Seweryn, K.; Skup, K.; Viertel, G.

    2012-12-01

    Solar Orbiter is an ESA mission to study the heliosphere in proximity to the Sun, scheduled for launch in January 2017. It carries a suite of ten instruments for comprehensive remote-sensing and in-situ measurements. The Spectrometer Telescope for Imaging X-Rays (STIX), one of the remote sensing instruments, images X-rays between 4 and 150keV using an Fourier technique. The angular resolution is 7 arcsec and the spectral resolution 1keV full-width-half-maximum at 6keV. X-ray detection uses pixelized Cadmium Telluride crystals provided by the Paul Scherrer Institute. The crystals are bonded to read-out hybrids developed by CEA Saclay, called Caliste-SO, incorporating a low-noise, low-power analog front-end ASIC IDeF-X HD. The crystals are cooled to -20°C to obtain very low leakage currents of less than 60pA per pixel, the prerequisite for obtaining the required spectral resolution. This article briefly describes the mission goals and then details the front-end electronics design and main challenges, resulting in part from the allocation limit in mass of 7kg and in power of 4W. Emphasis is placed on the design influence of the cooling requirement within the warm environment of a mission approaching the Sun to within the orbit of Mercury. The design for the long-term in-flight energy calibration is also explained.

  19. PHOTOSPHERIC FLOW FIELD RELATED TO THE EVOLUTION OF THE SUN'S POLAR MAGNETIC PATCHES OBSERVED BY HINODE SOLAR OPTICAL TELESCOPE

    SciTech Connect

    Kaithakkal, Anjali John; Suematsu, Y.; Kubo, M.; Iida, Y.; Tsuneta, S.; Shiota, D.

    2015-02-01

    We investigated the role of photospheric plasma motions in the formation and evolution of polar magnetic patches using time-sequence observations with high spatial resolution. The observations were obtained with the spectropolarimeter on board the Hinode satellite. From the statistical analysis using 75 magnetic patches, we found that they are surrounded by strong converging, supergranulation associated flows during their apparent lifetime and that the converging flow around the patch boundary is better observed in the Doppler velocity profile in the deeper photosphere. Based on our analysis, we suggest that the like-polarity magnetic fragments in the polar region are advected and clustered by photospheric converging flows, thereby resulting in the formation of polar magnetic patches. Our observations show that, in addition to direct cancellation, magnetic patches decay by fragmentation followed by unipolar disappearance or unipolar disappearance without fragmentation. It is possible that the magnetic patches of existing polarity fragment or diffuse away into smaller elements and eventually cancel out with opposite polarity fragments that reach the polar region around the solar cycle maximum. This could be one of the possible mechanisms by which the existing polarity decays during the reversal of the polar magnetic field.

  20. Hubble Space Telescope Assembly

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Engineers and technicians conduct a fit check of the Hubble Space Telescope (HST) Solar Array flight article in a clean room of the Lockheed Missile and Space Company. The Solar Array is 40- feet (12.1-meters) long and 8.2-feet (2.5-meters) wide, and provides power to the spacecraft. The HST is the first of NASA's great observatories and the most complex and sensitive optical telescope ever made. The purpose of the HST is to study the cosmos from a low-Earth orbit by placing the telescope in space, enabling astronomers to collect data that is free of the Earth's atmosphere. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had overall responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Cornecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company, Sunnyvale, California, produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  1. SNAP Telescope

    NASA Astrophysics Data System (ADS)

    Lampton, Michael L.; Akerlof, Carl W.; Aldering, Greg; Amanullah, R.; Astier, Pierre; Barrelet, E.; Bebek, Christopher; Bergstrom, Lars; Bercovitz, John; Bernstein, G.; Bester, Manfred; Bonissent, Alain; Bower, C. R.; Carithers, William C., Jr.; Commins, Eugene D.; Day, C.; Deustua, Susana E.; DiGennaro, Richard S.; Ealet, Anne; Ellis, Richard S.; Eriksson, Mikael; Fruchter, Andrew; Genat, Jean-Francois; Goldhaber, Gerson; Goobar, Ariel; Groom, Donald E.; Harris, Stewart E.; Harvey, Peter R.; Heetderks, Henry D.; Holland, Steven E.; Huterer, Dragan; Karcher, Armin; Kim, Alex G.; Kolbe, William F.; Krieger, B.; Lafever, R.; Lamoureux, J.; Levi, Michael E.; Levin, Daniel S.; Linder, Eric V.; Loken, Stewart C.; Malina, Roger; Massey, R.; McKay, Timothy; McKee, Shawn P.; Miquel, Ramon; Mortsell, E.; Mostek, N.; Mufson, Stuart; Musser, J. A.; Nugent, Peter E.; Oluseyi, Hakeem M.; Pain, Reynald; Palaio, Nicholas P.; Pankow, David H.; Perlmutter, Saul; Pratt, R.; Prieto, Eric; Refregier, Alexandre; Rhodes, J.; Robinson, Kem E.; Roe, N.; Sholl, Michael; Schubnell, Michael S.; Smadja, G.; Smoot, George F.; Spadafora, A.; Tarle, Gregory; Tomasch, Andrew D.; von der Lippe, H.; Vincent, R.; Walder, J.-P.; Wang, Guobin

    2002-12-01

    The SuperNova/Acceleration Probe (SNAP) mission will require a two-meter class telescope delivering diffraction limited images spanning a one degree field in the visible and near infrared wavelength regime. This requirement, equivalent to nearly one billion pixel resolution, places stringent demands on its optical system in terms of field flatness, image quality, and freedom from chromatic aberration. We discuss the advantages of annular-field three-mirror anastigmat (TMA) telescopes for applications such as SNAP, and describe the features of the specific optical configuration that we have baselined for the SNAP mission. We discuss the mechanical design and choice of materials for the telescope. Then we present detailed ray traces and diffraction calculations for our baseline optical design. We briefly discuss stray light and tolerance issues, and present a preliminary wavefront error budget for the SNAP Telescope. We conclude by describing some of tasks to be carried out during the upcoming SNAP research and development phase.

  2. SNAP telescope

    SciTech Connect

    Lampton, Michael L.; Akerlof, C.W.; Aldering, G.; Amanullah, R.; Astier, P.; Barrelet, E.; Bebek, C.; Bergstrom, L.; Bercovitz, J.; Bernstein, G.; Bester, M.; Bonissent, A.; Bower, C.; Carithers Jr., W.C.; Commins, E.D.; Day, C.; Deustua, S.E.; DiGennaro, R.; Ealet, A.; Ellis,R.S.; Eriksson, M.; Fruchter, A.; Genat, J.-F.; Goldhaber, G.; Goobar,A.; Groom, D.; Harris, S.E.; Harvey, P.R.; Heetderks, H.D.; Holland,S.E.; Huterer, D.; Karcher, A.; Kim, A.G.; Kolbe, W.; Krieger, B.; Lafever, R.; Lamoureux, J.; Levi, M.E.; Levin, D.S.; Linder, E.V.; Loken,S.C.; Malina, R.; Massey, R.; McKay, T.; McKee, S.P.; Miquel, R.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi,H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Pratt, R.; Prieto,E.; Refregier, A.; Rhodes, J.; Robinson, K.; Roe, N.; Sholl, M.; Schubnell, M.; Smadja, G.; Smoot, G.; Spadafora, A.; Tarle, G.; Tomasch,A.; von der Lippe, H.; Vincent, R.; Walder, J.-P.; Wang, G.; Wang, G.

    2002-07-29

    The SuperNova/Acceleration Probe (SNAP) mission will require a two-meter class telescope delivering diffraction limited images spanning a one degree field in the visible and near infrared wavelength regime. This requirement, equivalent to nearly one billion pixel resolution, places stringent demands on its optical system in terms of field flatness, image quality, and freedom from chromatic aberration. We discuss the advantages of annular-field three-mirror anastigmat (TMA) telescopes for applications such as SNAP, and describe the features of the specific optical configuration that we have baselined for the SNAP mission. We discuss the mechanical design and choice of materials for the telescope. Then we present detailed ray traces and diffraction calculations for our baseline optical design. We briefly discuss stray light and tolerance issues, and present a preliminary wavefront error budget for the SNAP Telescope. We conclude by describing some of tasks to be carried out during the upcoming SNAP research and development phase.

  3. Teaching Telescopes

    ERIC Educational Resources Information Center

    Reid, John S.

    1974-01-01

    Discusses experience of teaching optical experiments with emphasis upon the student's design and construction of refracting and reflecting telescopes. Concludes that the student's interest and acquired knowledge are greatly enhanced through the use of realistic experiments. (CC)

  4. Space Telescopes

    DTIC Science & Technology

    2010-01-01

    the Kirkpatrick–Baez type systems and the focussing colli- mator or ‘ lobster -eye’ systems. 1http://henke.lbl.gov/optical constants/ 176 9. Space...mirror requires a longer telescope. Focussing collimator or ‘ lobster -eye’ telescopes The Wolter and the Kirkpatrick–Baez systems have in common a...9.13: Flat-mirror two-dimensional focussing collimator or detached lobster - eye configuration (Schmidt 1975). within one tube but from adjacent walls a

  5. First Solar System Results Of The Spitzer Space Telescope, Including Imaging And Spectroscopy Of The Principal Uranian Satellites, Phoebe, And Rhea

    NASA Astrophysics Data System (ADS)

    van Cleve, J.; Cruikshank, D. P.; Stansberry, J. A.; Burgdorf, M. J.; Devost, D.; Emery, J. P.; Fazio, G.; Fernandez, Y. R.; Glaccum, W.; Grillmair, C.; Houck, J. R.; Meadows, V. S.; Morris, P.; Reach, W. T.; Reitsema, H.; Rieke, G. H.; Werner, M. W.

    2004-05-01

    The Spitzer Space Telescope, formerly known as SIRTF, is now operational and delivers unprecedented sensitivity for the observation of Solar System targets. Spitzer has three instruments, IRAC, IRS, and MIPS. IRAC (InfraRed Array Camera) provides simultaneous images at wavelengths of 3.6, 4.5, 5.8, and 8.0 μ m. IRS (InfraRed Spectrograph) has 4 modules providing low-resolution (R=60-120) spectra from 5.3 to 40 μ m, high-resolution (R=600) spectra from 10 to 37 μ m, and an autonomous target acquisition system (PeakUp) which includes small-field imaging at 15 μ m. MIPS (Multiband Imaging Photometer for SIRTF) does imaging photometry at 24, 70, and 160 μ m and low-resolution (R=15-25) spectroscopy (SED) between 55 and 96 μ m. Guaranteed Time Observer (GTO) programs include the moons of the outer Solar System, Pluto, Centaurs, Kuiper Belt Objects, and comets. For example, the "IRS Moons and Planets" program is now examining the principal satellites of outer Solar System planets, as well as Uranus and Neptune, using all SIRTF instruments. IRAC photometry will establish the hitherto unknown albedo of these cold objects at wavelengths between 3.5 and 8 μ m, IRS will do reflectance spectrosopy at wavelengths between 5.3 and 15 μ m, and thermal emission spectroscopy between 10 and 40 μ m. Combined with MIPS photometry and SED measurements, these data will provide compositional information, albedo, and thermal properties of these objects. The observations of Uranus and Neptune will be used to monitor changes in Uranus and Neptune atmospheres with season [1,2], for trace composition data, and for precise straylight subtraction for observations of their innermost principal satellites. We will observe Titan to compare spectra of the hemisphere centered on the "continent" seen in near-IR Hubble images [3] to spectra of other Titan longitudes, and interpret these differences in terms of surface composition and temperature. The poster will represent the first Solar System

  6. Apollo Telescope Mount Spar Assembly

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The Apollo Telescope Mount (ATM), designed and developed by the Marshall Space Flight Center, served as the primary scientific instrument unit aboard the Skylab. The ATM contained eight complex astronomical instruments designed to observe the Sun over a wide spectrum from visible light to x-rays. This image shows the ATM spar assembly. All solar telescopes, the fine Sun sensors, and some auxiliary systems are mounted on the spar, a cruciform lightweight perforated metal mounting panel that divides the 10-foot long canister lengthwise into four equal compartments. The spar assembly was nested inside a cylindrical canister that fit into the rack, a complex frame, and was protected by the solar shield.

  7. Development of AN Advanced Dust Telescope

    NASA Astrophysics Data System (ADS)

    Srama, R.; Srowig, A.; Rachev, M.; Grün, E.; Auer, S.; Conlon, T.; Glasmachers, A.; Harris, D.; Helfert, S.; Kempf, S.; Linnemann, H.; Moragas-Klostermeyer, G.; Tschernjawski, V.

    2004-12-01

    There are different types of dust particles in interplanetary space, such as dust from comets and asteroids, and interstellar grains traversing the solar system. Based on experience with current space dust instruments, a novel dust telescope is being developed. A dust telescope is a combination of a dust trajectory sensor for the identification and an analyzer for the elemental composition of the dust. Dust particles’ trajectories are determined by the measurement of the electric signals that are induced when a charged grain flies through a position-sensitive electrode system. The objective of the trajectory sensor is to measure dust charges in the range 10-16 10-13 C and dust speeds in the range 6 100 km/s. First tests with a laboratory setup have been performed. The chemical analyzer will have an impact area of 0.1 m2. It consists of a target with an acceleration grid and a single-stage reflectron for energy focusing, and a central ion detector. Results from SIMION simulations show that a mass resolution of M/Δ M>150 can be obtained.

  8. Comet C2012 S1 (ISON): Observations of the Dust Grains From SOFIA and of the Atomic Gas From NSO Dunn and Mcmath-Pierce Solar Telescopes

    NASA Technical Reports Server (NTRS)

    Wooden, Diane H.; Woodward, Charles E.; Harker, David E.; Kelley, Michael S. P.; Sitko, Michael; Reach, William T.; De Pater, Imke; Gehrz, Robert D.; Kolokolova, Ludmilla; Cochran, Anita L.; McKay, Adam J.; Reardon, Kevin; Cauzzi, Gianna; Tozzi, Gian Paolo; Christian, Damian J.; Jess, David B.; Mathioudakis, Mihalis; Lisse, Carey Michael; Morgenthaler, Jeffrey P.; Knight, Matthew Manning

    2013-01-01

    Comet C/2012 S1 (ISON) is unique in that it is a dynamically new comet derived from the Oort cloud reservoir of comets with a sun-grazing orbit. Infrared (IR) and visible wavelength observing campaigns were planned on NASA's Stratospheric Observatory For Infrared Astronomy (SOFIA) and on National Solar Observatory Dunn (DST) and McMath-Pierce Solar Telescopes, respectively. We highlight our SOFIA (+FORCAST) mid- to far-IR images and spectroscopy (approx. 5-35 microns) of the dust in the coma of ISON are to be obtained by the ISON-SOFIA Team during a flight window 2013 Oct 21-23 UT (r_h approx. = 1.18 AU). Dust characteristics, identified through the 10 micron silicate emission feature and its strength, as well as spectral features from cometary crystalline silicates (Forsterite) at 11.05-11.2 microns, and near 16, 19, 23.5, 27.5, and 33 microns are compared with other Oort cloud comets that span the range of small and/or highly porous grains (e.g., C/1995 O1 (Hale-Bopp) and C/2001 Q4 (NEAT) to large and/or compact grains (e.g., C/2007 N4 (Lulin) and C/2006 P1 (McNaught)). Measurement of the crystalline peaks in contrast to the broad 10 and 20 micron amorphous silicate features yields the cometary silicate crystalline mass fraction, which is a benchmark for radial transport in our protoplanetary disk. The central wavelength positions, relative intensities, and feature asymmetries for the crystalline peaks may constrain the shapes of the crystals. Only SOFIA can look for cometary organics in the 5-8 micron region. Spatially resolved measurements of atoms and simple molecules from when comet ISON is near the Sun (r_h< 0.4 AU, near Nov-20-Dec-03 UT) were proposed for by the ISON-DST Team. Comet ISON is the first comet since comet Ikeya-Seki (1965f) suitable for studying the alkalai metals Na and K and the atoms specifically attributed to dust grains including Mg, Si, Fe, as well as Ca. DST's Horizontal Grating Spectrometer (HGS) measures 4 settings: Na I, K, C2 to

  9. Opening the Dutch Open Telescope

    NASA Astrophysics Data System (ADS)

    Rutten, R. J.; de Wijn, A. G.; Sütterlin, P.; Bettonvil, F. C. M.; Hammerschlag, R. H.

    2002-10-01

    We hope to "open the DOT" to the international solar physics community as a facility for high-resolution tomography of the solar atmosphere. Our aim is to do so combining peer-review time allocation with service-mode operation in a "hands-on-telescope" education program bringing students to La Palma to assist in the observing and processing. The largest step needed is considerable speedup of the DOT speckle processing.

  10. A Novel Dust Telescope

    NASA Astrophysics Data System (ADS)

    Grün, E.; Srama, R.; Krüger, H.; Kempf, S.; Harris, D.; Conlon, T.; Auer, S.

    2001-11-01

    Dust particles in space, like photons, are born at remote sites in space and time. From knowledge of the dust particles' birthplace and the particles' bulk properties, we can learn about the remote environment out of which the particles were formed. This approach is carried out by means of a dust telescope on a dust observatory in space. A dust telescope is a combination of a dust trajectory sensor together with a chemical composition analyzer for dust particles. A novel dust telescope is described. It consists of a highly sensitive dust trajectory sensor, and a large area chemical dust analyzer. It can provide valuable information about the particles' birthplace which may not be accessible by other techniques. Dust particles' trajectories are determined by the measurement of the electric signals that are induced when a charged grain flies through an appropriately configured electrode systems. After the successful identification of a few charged micron-sized dust grains in space by the Cassini Cosmic Dust Analyzer, this dust telescope has a ten fold increased sensitivity of charge detection (10-16 Coulombs) and will be able to obtain trajectories for sub-micron sized dust grains. State-of-the art dust chemical analyzers have sufficient mass resolution to resolve ions with atomic mass numbers above 100. However, since their impact areas are small they can analyze statistically meaningful numbers of grains only in the dust-rich environments of comets or ringed planets. Therefore, this dust telescope includes a large area (0.1 m2) chemical dust analyzer of mass resolution > 100 that will allow us to obtain statistically significant measurements of interplanetary and interstellar dust grains in space.

  11. Origins Space Telescope

    NASA Astrophysics Data System (ADS)

    Cooray, Asantha R.; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. I will summarize the OST STDT, mission design and instruments, key science drivers, and the study plan over the next two years.

  12. Telescopic hindsight

    NASA Astrophysics Data System (ADS)

    Cox, Laurence

    2014-08-01

    In reply to the physicsworld.com blog post "Cosmic blunders that have held back science" (2 June, http://ow.ly/xwC7C), about an essay by the astronomer Avi Loeb in which he criticized, among others, his Harvard University predecessor Edward Pickering, who claimed in 1909 that telescopes had reached their optimal size.

  13. Infrared telescope

    NASA Technical Reports Server (NTRS)

    Karr, G. R.; Hendricks, J. B.

    1985-01-01

    The development of the Infrared Telescope for Spacelab 2 is discussed. The design, development, and testing required to interface a stationary superfluid helium dewar with a scanning cryostate capable of operating in the zero-g environment in the space shuttle bay is described.

  14. Selecting Your First Telescope.

    ERIC Educational Resources Information Center

    Harrington, Sherwood

    1982-01-01

    Designed for first-time telescope purchasers, provides information on how a telescope works; major telescope types (refractors, reflectors, compound telescopes); tripod, pier, altazimuth, and equatorial mounts; selecting a telescope; visiting an astronomy club; applications/limitations of telescope use; and tips on buying a telescope. Includes a…

  15. Observing the Fine Structure of Loops through High-resolution Spectroscopic Observations of Coronal Rain with the CRISP Instrument at the Swedish Solar Telescope

    NASA Astrophysics Data System (ADS)

    Antolin, P.; Rouppe van der Voort, L.

    2012-02-01

    Observed in cool chromospheric lines, such as Hα or Ca II H, coronal rain corresponds to cool and dense plasma falling from coronal heights. Considered as a peculiar sporadic phenomenon of active regions, it has not received much attention since its discovery more than 40 years ago. Yet, it has been shown recently that a close relationship exists between this phenomenon and the coronal heating mechanism. Indeed, numerical simulations have shown that this phenomenon is most likely due to a loss of thermal equilibrium ensuing from a heating mechanism acting mostly toward the footpoints of loops. We present here one of the first high-resolution spectroscopic observations of coronal rain, performed with the CRisp Imaging Spectro Polarimeter (CRISP) instrument at the Swedish Solar Telescope. This work constitutes the first attempt to assess the importance of coronal rain in the understanding of the coronal magnetic field in active regions. With the present resolution, coronal rain is observed to literally invade the entire field of view. A large statistical set is obtained in which dynamics (total velocities and accelerations), shapes (lengths and widths), trajectories (angles of fall of the blobs), and thermodynamic properties (temperatures) of the condensations are derived. Specifically, we find that coronal rain is composed of small and dense chromospheric cores with average widths and lengths of ~310 km and ~710 km, respectively, average temperatures below 7000 K, displaying a broad distribution of falling speeds with an average of ~70 km s-1, and accelerations largely below the effective gravity along loops. Through estimates of the ion-neutral coupling in the blobs we show that coronal rain acts as a tracer of the coronal magnetic field, thus supporting the multi-strand loop scenario, and acts as a probe of the local thermodynamic conditions in loops. We further elucidate its potential in coronal heating. We find that the cooling in neighboring strands occurs

  16. OBSERVING THE FINE STRUCTURE OF LOOPS THROUGH HIGH-RESOLUTION SPECTROSCOPIC OBSERVATIONS OF CORONAL RAIN WITH THE CRISP INSTRUMENT AT THE SWEDISH SOLAR TELESCOPE

    SciTech Connect

    Antolin, P.; Rouppe van der Voort, L. E-mail: v.d.v.l.rouppe@astro.uio.no

    2012-02-01

    Observed in cool chromospheric lines, such as H{alpha} or Ca II H, coronal rain corresponds to cool and dense plasma falling from coronal heights. Considered as a peculiar sporadic phenomenon of active regions, it has not received much attention since its discovery more than 40 years ago. Yet, it has been shown recently that a close relationship exists between this phenomenon and the coronal heating mechanism. Indeed, numerical simulations have shown that this phenomenon is most likely due to a loss of thermal equilibrium ensuing from a heating mechanism acting mostly toward the footpoints of loops. We present here one of the first high-resolution spectroscopic observations of coronal rain, performed with the CRisp Imaging Spectro Polarimeter (CRISP) instrument at the Swedish Solar Telescope. This work constitutes the first attempt to assess the importance of coronal rain in the understanding of the coronal magnetic field in active regions. With the present resolution, coronal rain is observed to literally invade the entire field of view. A large statistical set is obtained in which dynamics (total velocities and accelerations), shapes (lengths and widths), trajectories (angles of fall of the blobs), and thermodynamic properties (temperatures) of the condensations are derived. Specifically, we find that coronal rain is composed of small and dense chromospheric cores with average widths and lengths of {approx}310 km and {approx}710 km, respectively, average temperatures below 7000 K, displaying a broad distribution of falling speeds with an average of {approx}70 km s{sup -1}, and accelerations largely below the effective gravity along loops. Through estimates of the ion-neutral coupling in the blobs we show that coronal rain acts as a tracer of the coronal magnetic field, thus supporting the multi-strand loop scenario, and acts as a probe of the local thermodynamic conditions in loops. We further elucidate its potential in coronal heating. We find that the cooling

  17. Hubble Space Telescope-Illustration

    NASA Technical Reports Server (NTRS)

    1989-01-01

    This illustration depicts a side view of the Hubble Space Telescope (HST). The HST is the product of a partnership between NASA, European Space Agency Contractors, and the international community of astronomers. It is named after Edwin P. Hubble, an American Astronomer who discovered the expanding nature of the universe and was the first to realize the true nature of galaxies. The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The major elements of the HST are the Optical Telescope Assembly (OTA), the Support System Module (SSM), and the Scientific Instruments (SI). The HST is approximately the size of a railroad car, with two cylinders joined together and wrapped in a silvery reflective heat shield blanket. Wing-like solar arrays extend horizontally from each side of these cylinders, and dish-shaped anternas extend above and below the body of the telescope. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  18. Hubble Space Telescope-Illustration

    NASA Technical Reports Server (NTRS)

    1986-01-01

    This is a cutaway illustration of the Hubble Space Telescope (HST) with callouts. The HST is the product of a partnership between NASA, European Space Agency Contractors, and the international community of astronomers. It is named after Edwin P. Hubble, an American Astronomer who discovered the expanding nature of the universe and was the first to realize the true nature of galaxies. The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The major elements of the HST are the Optical Telescope Assembly (OTA), the Support System Module (SSM), and the Scientific Instruments (SI). The HST is approximately the size of a railroad car, with two cylinders joined together and wrapped in a silvery reflective heat shield blanket. Wing-like solar arrays extend horizontally from each side of these cylinders, and dish-shaped anternas extend above and below the body of the telescope. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  19. Hubble Space Telescope-Concept

    NASA Technical Reports Server (NTRS)

    1986-01-01

    This is an artist's concept of the Hubble Space Telescope (HST). The HST is the product of a partnership between NASA, European Space Agency Contractors, and the international community of astronomers. It is named after Edwin P. Hubble, an American Astronomer who discovered the expanding nature of the universe and was the first to realize the true nature of galaxies. The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than is visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The major elements of the HST are the Optical Telescope Assembly (OTA), the Support System Module (SSM), and the Scientific Instruments (SI). The HST is approximately the size of a railroad car, with two cylinders joined together and wrapped in a silvery reflective heat shield blanket. Wing-like solar arrays extend horizontally from each side of these cylinders, and dish-shaped anternas extend above and below the body of the telescope. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  20. Solar Adaptive Optics.

    PubMed

    Rimmele, Thomas R; Marino, Jose

    Adaptive optics (AO) has become an indispensable tool at ground-based solar telescopes. AO enables the ground-based observer to overcome the adverse effects of atmospheric seeing and obtain diffraction limited observations. Over the last decade adaptive optics systems have been deployed at major ground-based solar telescopes and revitalized ground-based solar astronomy. The relatively small aperture of solar telescopes and the bright source make solar AO possible for visible wavelengths where the majority of solar observations are still performed. Solar AO systems enable diffraction limited observations of the Sun for a significant fraction of the available observing time at ground-based solar telescopes, which often have a larger aperture than equivalent space based observatories, such as HINODE. New ground breaking scientific results have been achieved with solar adaptive optics and this trend continues. New large aperture telescopes are currently being deployed or are under construction. With the aid of solar AO these telescopes will obtain observations of the highly structured and dynamic solar atmosphere with unprecedented resolution. This paper reviews solar adaptive optics techniques and summarizes the recent progress in the field of solar adaptive optics. An outlook to future solar AO developments, including a discussion of Multi-Conjugate AO (MCAO) and Ground-Layer AO (GLAO) will be given.

  1. Calibration of an astrophysical spectrograph below 1 m/s using a laser frequency comb.

    PubMed

    Phillips, David F; Glenday, Alexander G; Li, Chih-Hao; Cramer, Claire; Furesz, Gabor; Chang, Guoqing; Benedick, Andrew J; Chen, Li-Jin; Kärtner, Franz X; Korzennik, Sylvain; Sasselov, Dimitar; Szentgyorgyi, Andrew; Walsworth, Ronald L

    2012-06-18

    We deployed two wavelength calibrators based on laser frequency combs ("astro-combs") at an astronomical telescope. One astro-comb operated over a 100 nm band in the deep red (∼ 800 nm) and a second operated over a 20 nm band in the blue (∼ 400 nm). We used these red and blue astro-combs to calibrate a high-resolution astrophysical spectrograph integrated with a 1.5 m telescope, and demonstrated calibration precision and stability sufficient to enable detection of changes in stellar radial velocity < 1 m/s.

  2. Robotic Telescopes

    NASA Astrophysics Data System (ADS)

    Akerlof, C. W.

    2001-05-01

    Since the discovery of gamma-ray bursts, a number of groups have attempted to detect correlated optical transients from these elusive objects. Following the flight of the BATSE instrument on the Compton Gamma-Ray Observatory in 1991, a prompt burst coordinate alert service, BACODINE (now GCN) became available to ground-based telescopes. Several instruments were built to take advantage of this facility, culminating in the discovery of a bright optical flash associated with GRB990123. To date, that single observation remains unique - no other prompt flashes have been seen for a dozen or so other bursts observed with comparably short response times. Thus, GRB prompt optical luminosities may be considerably dimmer than observed for the GRB990123 event or even absent altogether. A new generation of instruments is prepared to explore these possibilties using burst coordinates provided by HETE-2, Swift, Ballerina, Agile and other satellite missions. These telescopes have response times as short as a few seconds and reach limiting magnitudes, m_v 20, guaranteeing a sensitivity sufficient to detect the afterglow many hours later. Results from these experiments should provide important new data about the dynamics and locale of GRBs.

  3. Development of a 1-m Class Telescope at TMF to Support Optical Communications Demonstrations

    NASA Technical Reports Server (NTRS)

    Wilson, K. E.; Sandusky, J.

    1998-01-01

    With the impetus towards high data rate communications in inter-satellite and space-to-ground links, the small size, low-mass, and low-power consumption of optical communications is seen as a viable alternative to radio frequency links.

  4. ADAM low- and medium-resolution spectrograph for 1.6-m AZT-33IK telescope

    NASA Astrophysics Data System (ADS)

    Afanasiev, V. L.; Dodonov, S. N.; Amirkhanyan, V. R.; Moiseev, A. V.

    2016-10-01

    We describe the design of a suspended low- and medium-resolution spectrograph ( R ≈ 300-1300) designed and made at the Special Astrophysical Observatory of the Russian Academy of Sciences for the 1.6-m AZT-33IK telescope of Sayan Observatory of the Institute of Solar-Terrestrial Physics of the Siberian Branch of the Russian Academy of Sciences. We report the results of laboratory measurements of the parameters of the instrument and tests performed on the 1-m Zeiss-1000 telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences. We measured the total quantum efficiency of the "spectrograph + telescope + detector" system on AZT-33IK telescope, which at its maximum reaches 56%. Such a hight transparency of the spectrograph allows it to be used with the 1.6-m telescope to determine the types and redshifts of objects with integrated magnitudes m AB ≈ 20-21, and this result was confirmed by actual observations.

  5. Comprehensive Analyses of Data Collected from TEREK (Solar EUV Telescope) RES-C (Solar X-Ray Spectrometer) and SORS (Solar Radio Spectrometer) on board CORONAS-1 Using Magnetohydrodynamic Models

    NASA Technical Reports Server (NTRS)

    Wu, S. T.

    1997-01-01

    By using the observed magnetic field data obtained from the Wilcox Solar Observatory at Stanford University as the inputs to a two-dimensional plane-of-sky magnetohydrodynamic model, via numerical relaxation method, we have deduced the plasma and magnetic field parameters for the observed coronal hole by CORONAS-1. The method for this self-consistent MHD analysis will be discussed in detail. Numerical results for the magnetic field configuration, velocity distribution, density and temperature distributions will be presented. We have converted the computed density to polarization brightness in order to directly compare the MHD outputs with observations. Also included is a summary of achievements made during the grant period. This section is summarized into three categories: 1) Visit of Co-Investigators; 2) Presentations; and 3) Papers published, accepted and submitted for publication in journals.

  6. Holographic telescope

    NASA Astrophysics Data System (ADS)

    Odhner, Jefferson E.

    2016-07-01

    Holographic optical elements (HOEs) work on the principal of diffraction and can in some cases replace conventional optical elements that work on the principal of refraction. An HOE can be thinner, lighter, can have more functionality, and can be lower cost than conventional optics. An HOE can serve as a beam splitter, spectral filter, mirror, and lens all at the same time. For a single wavelength system, an HOE can be an ideal solution but they have not been widely accepted for multispectral systems because they suffer from severe chromatic aberration. A refractive optical system also suffers from chromatic aberration but it is generally not as severe. To color correct a conventional refractive optical system, a flint glass and a crown glass are placed together such that the color dispersion of the flint and the crown cancel each other out making an achromatic lens (achromat) and the wavelengths all focus to the same point. The color dispersion of refractive lenses and holographic lenses are opposite from each other. In a diffractive optical system, long wavelengths focus closer (remember for HOEs: RBM "red bends more") than nominal focus while shorter wavelengths focus further out. In a refractive optical system, it is just the opposite. For this reason, diffractives can be incorporated into a refractive system to do the color correction and often cut down on the number of optical elements used [1.]. Color correction can also be achieved with an all-diffractive system by combining a holographic optical element with its conjugate. In this way the color dispersion of the first holographic optical element can be cancelled by the color dispersion of the second holographic optic. It is this technique that will be exploited in this paper to design a telescope made entirely of holographic optical elements. This telescope could be more portable (for field operations) the same technique could be used to make optics light enough for incorporation into a UAV.

  7. The Spitzer Space Telescope Mission

    NASA Technical Reports Server (NTRS)

    Werner, M. W.

    2005-01-01

    The Spitzer Space Telescope, NASA's Great Observatory for infrared astronomy, was launched 2003 August 25 and is returning excellent scientific data from its Earth-trailing solar orbit. Spitzer combines the intrinsic sensitivity achievable with a cryogenic telescope in space with the great imaging and spectroscopic power of modern detector arrays to provide the user community with huge gains in capability for exploration of the cosmos in the infrared. The observatory systems are largely performing as expected, and the projected cryogenic lifetime is about five years. Spitzer is thus both a scientific and a technical precursor to the infrared astronomy missions of the future. This very brief paper refers interested readers to several sets of recent publications which describe both the scientific and the technical features of Spitzer in detail. Note that, until 2003 December, Spitzer was known as the Space Infrared Telescope Facility (SIRTF).

  8. Dutch Open Telescope: status, results, prospects

    NASA Astrophysics Data System (ADS)

    Rutten, Robert J.; Sütterlin, Peter; de Wijn, Alfred G.; Hammerschlag, Robert H.; Bettonvil, Felix C. M.; Hoogendoorn, Piet W.; Jägers, Aswin P. L.

    2002-12-01

    The Dutch Open Telescope (DOT) on La Palma is a revolutionary telescope achieving high-resolution imaging of the solar surface. The DOT combines a pioneering open design at an excellent wind-swept site with image restoration through speckle interferometry. Its open principle is now followed in major solar-telescope projects elsewhere. In the past three years the DOT became the first solar telescope to regularly obtain 0.2" resolution in extended image sequences, i.e., reaching the diffraction limit of its 45-cm primary mirror. Our aim for 2003-2005 is to turn the DOT into a 0.2" tomographic mapper of the solar atmosphere with frequent partnership in international multi-telescope campaigns through student-serviced time allocation. After 2005 we aim to triple the DOT resolution to 0.07" by increasing the aperture to 140 cm and to renew the speckle cameras and the speckle pipeline in order to increase the field size and sequence duration appreciably. These upgrades will maintain the DOT's niche as a tomographic high-resolution mapper in the era when GREGOR, Solar-B and SDO set the stage.

  9. SNAP Telescope Latest Developments

    NASA Astrophysics Data System (ADS)

    Lampton, M.; SNAP Collaboration

    2004-12-01

    The coming era of precision cosmology imposes new demands on space telescopes with regard to spectrophotometric accuracy and image stability. To meet these requirements for SNAP we have developed an all reflecting two-meter-class space telescope of the three-mirror anastigmat type. Our design features a large flat annular field (1.5 degrees = 580mm diameter) and a telephoto advantage of 6, delivering a 22m focal length within an optical package length of only 3.5 meters. The use of highly stable materials (Corning ULE glass and carbon-fiber reinforced cyanate ester resin for the metering structure) combined with agressive distributed thermal control and an L2 orbit location will lead to unmatched figure stability. Owing to our choice of rigid structure with nondeployable solar panels, finite-element models show no structural resonances below 10Hz. An exhaustive stray light study has been completed. Beginning in 2005, two industry studies will develop plans for fabrication, integration and test, bringing SNAP to a highly realistic level of definition. SNAP is supported by the Office of Science, US DoE, under contract DE-AC03-76SF00098.

  10. The CCAT Telescope

    NASA Astrophysics Data System (ADS)

    Glenn, Jason; CCAT

    2013-01-01

    CCAT will be a 25 m diameter on-axis Gregory telescope operating in the 0.2 to 2.1 mm wavelength range. It will be located at an altitude of 5600 m on Cerro Chajnantor in northern Chile. CCAT will support cameras and spectrometers with up to 1 field of view at its f/6 Nasmyth foci. The key performance requirements for the telescope are a half wavefront error <12.5 μm rms and pointing error <0.35"/350 μm). CCAT will have an f/0.4 primary with an active surface to compensate gravitational and thermal deformations. The primary will be made of 2 m keystone-shaped segments, each with 16 machined aluminum tiles mounted on a carbon-fiber-reinforced-plastic (CFRP) subframe. The segments will be supported by a CFRP spaceframe truss on an elevation over azimuth mount made of steel. CCAT will be inside an enclosure to reduce wavefront and pointing errors due to wind forces and thermal deformation due to solar illumination.

  11. Solar physics at APL.

    NASA Astrophysics Data System (ADS)

    Rust, D. M.

    1999-12-01

    Solar reserach at APL aims to understand the fundamental physics that govern solar activity. The tools are telescopes, models, and interplanetary sampling of solar ejecta. The work is relevant to APL's mission because solar energetic protons disable satellites and endanger astronauts. Solar activity also causes geomagnetic storms, which can lead to communications disruptions, electric power network problems, satellite orbit shifts and, sometimes, satellite failure. Predicting storm conditions requires understanding solar magnetism and its fluctuations. APL scientists have made major contributions to solar activity research and have taken the lead in developing a variety of new solar research tools. They are now starting work on the Solar Terrestrial Relations Observatory, a major space mission.

  12. Infrared observations of the solar system in support of Large-Aperture Infrared Telescope (LARITS): Calibration. Final technical report, 1 July 1985-28 February 1989

    SciTech Connect

    Shorthill, R.W.

    1990-05-02

    The Purpose of this project was to improve the infrared calibration base for infrared detectors. Groundbased infrared measurements of solid-surfaced planetary bodies, such as asteroids, are being used for the calibration of spacecraft detectors. A limitation has been the relatively poor theoretical understanding of thermal emission from these objects. The goal was to: (1) develop a database of sources and, (2) improve or modify the thermal models for these sources to provide a calibration data base for spacecraft infrared detector systems. The technique consisted of five phases: (1) design and construct infrared detector system to be used with and without collecting optics, (2) acquire whole-disk infrared lunar data relative to a laboratory blackbody and tie them to Mars (Venus or Mercury) and Vega, (3) compare with thermophysical model of the mood and modify, (4) acquire infrared asteroid photometry, (5) compare the lunar disk photometry the asteroid calibrators using photometry and thermophysical models. The Si bolometer is calibrated without optics, attached to the portable telescope drive and Lunar disk measurement made. Next the bolometer is attached to the 90 inch telescope, Lunar scans are made and the remaining objects (planets, stars, asteroids) are measured.

  13. LSST telescope and site status

    NASA Astrophysics Data System (ADS)

    Gressler, William J.

    2016-07-01

    The Large Synoptic Survey Telescope (LSST) Project1 received its construction authorization from the National Science Foundation in August 2014. The Telescope and Site (T and S) group has made considerable progress towards completion in subsystems required to support the scope of the LSST science mission. The LSST goal is to conduct a wide, fast, deep survey via a 3-mirror wide field of view optical design, a 3.2-Gpixel camera, and an automated data processing system. The summit facility is currently under construction on Cerro Pachón in Chile, with major vendor subsystem deliveries and integration planned over the next several years. This paper summarizes the status of the activities of the T and S group, tasked with design, analysis, and construction of the summit and base facilities and infrastructure necessary to control the survey, capture the light, and calibrate the data. All major telescope work package procurements have been awarded to vendors and are in varying stages of design and fabrication maturity and completion. The unique M1M3 primary/tertiary mirror polishing effort is completed and the mirror now resides in storage waiting future testing. Significant progress has been achieved on all the major telescope subsystems including the summit facility, telescope mount assembly, dome, hexapod and rotator systems, coating plant, base facility, and the calibration telescope. In parallel, in-house efforts including the software needed to control the observatory such as the scheduler and the active optics control, have also seen substantial advancement. The progress and status of these subsystems and future LSST plans during this construction phase are presented.

  14. Arrays vs. single telescopes

    NASA Astrophysics Data System (ADS)

    Johnson, H. L.

    The question of the relative efficiencies of telescope arrays versus an equivalent mirror-area very large telescope is re-examined and summarized. Four separate investigations by Bowen, Johnson and Richards, Code, and Disney all came to the same conclusion: that an array of telescopes is superior, both scientifically and economically, to a single very large telescope. The costs of recently completed telescopes are compared. The costs of arrays of telescopes are shown to be significantly lower than that of a single, very large telescope, with the further advantage that because existing, proven, designs can be used, no engineering 'break-throughs' are needed.

  15. STUDY OF RAPID FORMATION OF A {delta} SUNSPOT ASSOCIATED WITH THE 2012 JULY 2 C7.4 FLARE USING HIGH-RESOLUTION OBSERVATIONS OF THE NEW SOLAR TELESCOPE

    SciTech Connect

    Wang Haimin; Liu Chang; Wang Shuo; Deng Na; Xu Yan; Jing Ju; Cao Wenda

    2013-09-10

    Rapid, irreversible changes of magnetic topology and sunspot structure associated with flares have been systematically observed in recent years. The most striking features include the increase of the horizontal field at the polarity inversion line (PIL) and the co-spatial penumbral darkening. A likely explanation of the above phenomenon is the back reaction to the coronal restructuring after eruptions: a coronal mass ejection carries the upward momentum while the downward momentum compresses the field lines near the PIL. Previous studies could only use low-resolution (above 1'') magnetograms and white-light images. Therefore, the changes are mostly observed for X-class flares. Taking advantage of the 0.''1 spatial resolution and 15 s temporal cadence of the New Solar Telescope at the Big Bear Solar Observatory, we report in detail the rapid formation of sunspot penumbra at the PIL associated with the C7.4 flare on 2012 July 2. It is unambiguously shown that the solar granulation pattern evolves to an alternating dark and bright fibril structure, the typical pattern of penumbra. Interestingly, the appearance of such a penumbra creates a new {delta} sunspot. The penumbral formation is also accompanied by the enhancement of the horizontal field observed using vector magnetograms from the Helioseismic and Magnetic Imager. We explain our observations as being due to the eruption of a flux rope following magnetic cancellation at the PIL. Subsequently, the re-closed arcade fields are pushed down toward the surface to form the new penumbra. NLFFF extrapolation clearly shows both the flux rope close to the surface and the overlying fields.

  16. Normal incidence X-ray telescope power spectra of X-ray emission from solar active regions. I - Observations. II - Theory

    NASA Technical Reports Server (NTRS)

    Gomez, Daniel O.; Martens, Petrus C. H.; Golub, Leon

    1993-01-01

    Fourier analysis is applied to very high resolution image of coronal active regions obtained by the Normal Incidence X-Ray Telescope is used to find a broad isotropic power-law spectrum of the spatial distribution of soft X-ray intensities. Magnetic structures of all sizes are present down to the resolution limit of the instrument. Power spectra for the X-ray intensities of a sample of topologically different active regions are found which fall off with increasing wavenumber as 1/k-cubed. A model is presented that relates the basic features of coronal magnetic fluctuations to the subphotospheric hydrodynamic turbulence that generates them. The model is used to find a theoretical power spectrum for the X-ray intensity which falls off with increasing wavenumber as 1/k-cubed. The implications of a turbulent regime in active regions are discussed.

  17. Observations and Modeling of Solar Coronal Structures Using High-Resolution Eclipse Images and Space-based Telescopes with Wide Field of View

    NASA Astrophysics Data System (ADS)

    Lu, Muzhou; Pasachoff, J. M.; Su, Y.; Van Ballegooijen, A. A.; Seaton, D. B.; West, M.

    2013-07-01

    We present a comparison of the solar corona observed during the total solar eclipses on 2010 July 11 and on 2012 November 13. The white light images were taken at Easter Island in 2010 and at Northeast Queensland, Australia, in 2012; while the concurrent EUV images were take with SDO/AIA and PROBA2/SWAP. The 2010 eclipse was observed at the beginning of Sunspot Cycle 24 [1], which peaked near our 2012 observation. We compare a plethora of corona features in the white light images and reveal some interesting differences in the enhanced EUV images taken by SDO/AIA and PROBA2/SWAP. We construct potential field models using our newly refined Coronal Modeling System (CMS2) software with line-of-sight photospheric magnetograms from SDO/HMI. The source surface heights derived from detailed comparison between our models and observations are compared to the standard source-surface model. We also compare the dynamics of the two eclipse observations. Similar to the 2010 eclipse, a CME was observed using temporally spaced eclipse images. We address unresolved problems in the models and observations with the hope of correcting them for future eclipse observations, such as the 2017 total solar eclipse across the continental U.S. References [1] Pasachoff, J. M., Rusin, V., Druckmüllerová, H., Saniga, M., Lu, M., Malamut, C., Seaton, D. B., Golub, L., Engell, A. J., Hill, S. W., Lucas, R., 2011, ApJ, 734, 114

  18. Galactic Cosmic Ray Proton Spectra during Solar Cycle 23 and 24 - Measurement Capabilities of the Electron Proton Helium Telescope on Board SOHO

    NASA Astrophysics Data System (ADS)

    Kühl, Patrick; Klassen, Andreas; Gieseler, Jan; Dresing, Nina; Heber, Bernd

    2016-07-01

    The solar modulation of galactic cosmic rays (GCR) can be studied in detail by long term variations of the GCR energy spectrum (e.g. on the scales of a solar cycle). With almost 20 years of data, the Electron Proton Helium INstrument (EPHIN) aboard SOHO is well suited for these kind of investigations. Although the design of the instrument is optimized to measure proton and helium isotope spectra up to 50 MeV/nucleon the capability exist that allow to determine energy spectra between 250 MeV and 1.6 GeV. Therefore we developed a sophisticated inversion method to calculate such proton spectra. The method relies on a GEANT4 Monte Carlo simulation of the instrument and a simplified spacecraft model that calculates the energy response function of EPHIN for electrons, protons and heavier ions. In order to determine the energy spectra the resulting inversion problem is solved numerically. As a result we present galactic cosmic ray spectra from 1995 to 2015. For validation, the derived spectra are compared to AMS, BESS and PAMELA data. Furthermore we discuss the spectra with respect to the solar modulation.

  19. Development of Solar Research

    NASA Astrophysics Data System (ADS)

    Wittmann, Axel D.; Wolfschmidt, Gudrun; Duerbeck, Hilmar W.

    Originally based on a workshop on “Development of Solar Research”, held in Freiburg/Breisgau, this book contains articles on megalithic structures, the Nebra sky-disk, ancient sun cults, the observation of sunspots, the photography of the sun during eclipses, eclipse maps and expeditions, solar telescopes, solar physics during the Nazi era, archives of solar observations, scientific ballooning for solar research, site-testing on the Canary Islands, as well as on international cooperation.

  20. Future Directions in Solar Physics

    NASA Technical Reports Server (NTRS)

    Rabin, Douglas

    2010-01-01

    I will discuss scientific opportunities for space-based solar physics instruments in the coming decade and their synergy with major new ground-based telescopes. l will also discuss ( pow small satellites may complement larger solar physics missions.

  1. Operations at the JPL OCTL Telescope

    NASA Technical Reports Server (NTRS)

    Wilson, Keith E.; Kovalik, Joseph M.; Biswas, Abhijit; Roberts, William T.

    2007-01-01

    The JPL Optical Communications Telescope Laboratory (OCTL) is a 200 sq-m located at 2.2.km altitude in Wrightwood California and houses a state-of-the-art 1-m telescope. The OCTL team is involved in the development of operational strategies for ground-to-space laser beam propagation for future NASA optical communications missions. Strategies include safe beam propagation through navigable air space, line of sight optical attenuation monitoring, adaptive optics, and multi-beam scintillation mitigation. This paper presents the results of recent operations at the OCTL facility including telescope characterization data and laser beam propagation experiments to Earth-orbiting retro-reflecting satellites; experiments that validate the telescope's tracking and blind-pointing performance and safe laser beam transmission procedures for propagating through navigable airspace.

  2. The Irkutsk Barium filter for narrow-band wide-field high-resolution solar images at the Dutch Open Telescope

    NASA Astrophysics Data System (ADS)

    Hammerschlag, Robert H.; Skomorovsky, Valery I.; Bettonvil, Felix C. M.; Kushtal, Galina I.; Olshevsky, Vyacheslav L.; Rutten, Robert J.; Jägers, Aswin P. L.; Sliepen, Guus; Snik, Frans

    2010-07-01

    A wide-field birefringent filter for the barium II line at 455.4nm is developed in Irkutsk. The Barium line is excellent for Doppler-shift measurements because of low thermal line-broadening and steep flanks of the line profile. The filter width is 0.008nm and the filter is tunable over 0.4nm through the whole line and far enough in the neighboring regions. A fast tuning system with servomotor is developed at the Dutch Open Telescope (DOT). Observations are done in speckle mode with 10 images per second and Keller-VonDerLühe reconstruction using synchronous images of a nearby bluecontinuum channel at 450.5nm. Simultaneous observation of several line positions, typically 3 or 5, are made with this combination of fast tuning and speckle. All polarizers are birefringent prisms which largely reduced the light loss compared to polarizing sheets. The advantage of this filter over Fabry-Perot filters is its wide field due to a large permitted entrance angle and no need of polishing extremely precise surfaces. The BaII observations at the DOT occur simultaneously with those of a fast-tunable birefringent H-alpha filter. This gives the unique possibility of simultaneous speckle-reconstructed observations of velocities in photosphere (BaII) and chromosphere (H-alpha).

  3. Spitzer Space Telescope mission design

    NASA Technical Reports Server (NTRS)

    Kwok, Johnny H.; Garcia, Mark D.; Bonfiglio, Eugene; Long, Stacia M.

    2004-01-01

    This paper gives a description of the mission design, launch, orbit, and navigation results for the Spitzer space telescope mission. The Spitzer telescope was launched by the Delta II Heavy launch vehicle into a heliocentric Earth trailing orbit. This orbit is flown for the first time and will be used by several future astronomical missions such as Kepler, SIM, and LISA. This paper describes the launch strategy for a winter versus a summer launch and how it affects communications. It also describes how the solar orbit affects the design and operations of the Observatory. It describes the actual launch timeline, launch vehicle flight performance, and the long term behavior of the as flown orbit. It also provides the orbit knowledge from in-flight navigation data.

  4. Telescope performance at the Large Binocular Telescope

    NASA Astrophysics Data System (ADS)

    Hill, John M.; Rothberg, Barry; Christou, Julian C.; Summers, Kellee R.; Summers, Douglas M.

    2016-07-01

    The Large Binocular Telescope Observatory is a collaboration between institutions in Arizona, Germany, Italy, Indiana, Minnesota, Ohio and Virginia. The telescope uses two 8.4-m diameter primary mirrors mounted sideby- side on the same AZ-EL mount to produce a collecting area equivalent to an 11.8-meter aperture. Adaptive optics loops are routinely closed with natural stars on both sides for sided and combined beam observations. Rayleigh laser guide stars provide GLAO seeing improvement. With the telescope now in operation for 10 years, we report on various statistics of telescope performance and seeing-limited image quality. Statistics of telescope performance are reported in the areas of off-axis guiding, open-loop mount tracking, active optics and vibration. Delivered image quality is reported as measured by the DIMM and several guide cameras as a function of other parameters such as temperature and wind velocity. Projects to improve image quality and dome seeing are underway.

  5. Four-cell solar tracker

    NASA Technical Reports Server (NTRS)

    Berdahl, C. M.

    1981-01-01

    Forty cm Sun tracker, consisting of optical telescope and four solar cells, stays pointed at Sun throughout day for maximum energy collection. Each solar cell generates voltage proportional to part of solar image it receives; voltages drive servomotors that keep image centered. Mirrored portion of cylinder extends acquisition angle of device by reflecting Sun image back onto solar cells.

  6. ACS (Alma Common Software) operating a set of robotic telescopes

    NASA Astrophysics Data System (ADS)

    Westhues, C.; Ramolla, M.; Lemke, R.; Haas, M.; Drass, H.; Chini, R.

    2014-07-01

    We use the ALMA Common Software (ACS) to establish a unified middleware for robotic observations with the 40cm Optical, 80cm Infrared and 1.5m Hexapod telescopes located at OCA (Observatorio Cerro Armazones) and the ESO 1-m located at La Silla. ACS permits to hide from the observer the technical specifications, like mount-type or camera-model. Furthermore ACS provides a uniform interface to the different telescopes, allowing us to run the same planning program for each telescope. Observations are carried out for long-term monitoring campaigns to study the variability of stars and AGN. We present here the specific implementation to the different telescopes.

  7. The space telescope

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Papers concerning the development of the Space Telescope which were presented at the Twenty-first Annual Meeting of the American Astronautical Society in August, 1975 are included. Mission planning, telescope performance, optical detectors, mirror construction, pointing and control systems, data management, and maintenance of the telescope are discussed.

  8. Hubble Space Telescope Servicing begins.

    NASA Astrophysics Data System (ADS)

    1993-12-01

    The day's work began when astronauts Story Musgrave and Jeff Hoffman stepped out into the cargo bay at 9h41 pm CST, Saturday (4h41 am CET, Sunday). They immediately set to work replacing two gyroscope assemblies, known as the Rate Sensor Units, two associated electronics boxes, called Electronic Control Units, and eight electrical fuse plugs. The work was completed ahead of schedule, but the astronauts had trouble closing the doors of the compartment housing the gyros and took over an hour to get them shut. The astronauts also prepared equipment for the replacement of the solar arrays. "The feeling down here is one of great satisfaction for a tremendous job today" said spacecraft communicator Greg Harbaugh in mission control. "We are very proud of the work that you all did and we are very confident in the continued success of the mission. Everything is going great and tomorrow is going to be another great day". ESA astronaut Claude Nicollier played a vital role during the spacewalk moving the astronauts and their equipment around the cargo bay with the shuttle's robot arm. The Hubble Space Telescope servicing mission features more robot arm operations than any other shuttle flight. The telescope's left-hand solar array was rolled up successfully at 6h24 am CST (1h24 pm CET). The 11-tonne observatory was rotated 180 degrees on its turntable before commands were sent to retract the second array at 8h23 am CST (3h23 pm CET). The crew stopped the retraction when it appeared the system may have jammed. Mission control instructed the crew to jettison the array, a procedure that they have trained for. Tomorrow astronauts Kathy Thornton and Tom Akers will make a six-hour spacewalk to jettison the troublesome wing, store the other in the cargo bay, and install two new panels supplied by ESA. The second set of arrays feature thermal shields and a modified thermal compensation system to prevent the flexing that affected the first pair. The Hubble Space Telescope was plucked

  9. Lunar Ultraviolet Telescope Experiment (LUTE) overview

    NASA Astrophysics Data System (ADS)

    McBrayer, R. O.; Frazier, J.; Nein, M.

    1993-09-01

    The Lunar Ultraviolet Telescope Experiment (LUTE) is a 1-m aperture telescope for imaging the stellar ultraviolet spectrum from the lunar surface. The aspects of Lute's educational value and the information it can provide on designing for the long-term exposure to the lunar environment are important considerations. This paper briefly summarizes the status of the phase A study by the Marshall Space Flight Center's (MSFC) LUTE Task Team. The primary focus will be a discussion of the merits of LUTE as a small and relatively inexpensive project that benefits a wide spectrum of interests and could be operating on the lunar surface by the turn of the century.

  10. Origins Space Telescope: Telescope Design and Instrument Specifications

    NASA Astrophysics Data System (ADS)

    Meixner, Margaret; Carter, Ruth; Leisawitz, David; Dipirro, Mike; Flores, Anel; Staguhn, Johannes; Kellog, James; Roellig, Thomas L.; Melnick, Gary J.; Bradford, Charles; Wright, Edward L.; Zmuidzinas, Jonas; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. The renaming of the mission reflects Origins science goals that will discover and characterize the most distant galaxies, nearby galaxies and the Milky Way, exoplanets, and the outer reaches of our Solar system. This poster will show the preliminary telescope design that will be a large aperture (>8 m in diameter), cryogenically cooled telescope. We will also present the specifications for the spectrographs and imagers over a potential wavelength range of ~10 microns to 1 millimeter. We look forward to community input into this mission definition over the coming year as we work on the concept design for the mission. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. We welcome you to contact the Science and Technology Definition Team (STDT) with your science needs and ideas by emailing us at firsurveyor_info@lists.ipac.caltech.edu.

  11. A decametric wavelength radio telescope for interplanetary scintillation observations

    NASA Technical Reports Server (NTRS)

    Cronyn, W. M.; Shawhan, S. D.

    1975-01-01

    A phased array, electrically steerable radio telescope (with a total collecting area of 18 acres), constructed for the purpose of remotely sensing electron density irregularity structure in the solar wind, is presented. The radio telescope is able to locate, map, and track large scale features of the solar wind, such as streams and blast waves, by monitoring a large grid of natural radio sources subject to rapid intensity fluctuation (interplanetary scintillation) caused by the irregularity structure. Observations verify the performance of the array, the receiver, and the scintillation signal processing circuitry of the telescope.

  12. Liverpool Telescope and Liverpool Telescope 2

    NASA Astrophysics Data System (ADS)

    Copperwheat, C. M.; Steele, I. A.; Barnsley, R. M.; Bates, S. D.; Clay, N. R.; Jermak, H.; Marchant, J. M.; Mottram, C. J.; Piascik, A.; Smith, R. J.

    2016-12-01

    The Liverpool Telescope is a fully robotic optical/near-infrared telescope with a 2-metre clear aperture, located at the Observatorio del Roque de los Muchachos on the Canary Island of La Palma. The telescope is owned and operated by Liverpool John Moores University, with financial support from the UK's Science and Technology Facilities Council. The telescope began routine science operations in 2004 and is a common-user facility with time available through a variety of committees via an open, peer reviewed process. Seven simultaneously mounted instruments support a broad science programme, with a focus on transient follow-up and other time domain topics well suited to the characteristics of robotic observing. Development has also begun on a successor facility, with the working title `Liverpool Telescope 2', to capitalise on the new era of time domain astronomy which will be brought about by the next generation of survey facilities such as LSST. The fully robotic Liverpool Telescope 2 will have a 4-metre aperture and an improved response time. In this paper we provide an overview of the current status of both facilities.

  13. Technical Reliability Assessment of the Actigraph GT1M Accelerometer

    ERIC Educational Resources Information Center

    Silva, Pedro; Mota, Jorge; Esliger, Dale; Welk, Gregory

    2010-01-01

    The purpose of this study was to determine the reliability of the Actigraph GT1M (Pensacola, FL, USA) accelerometer activity count and step functions. Fifty GT1M accelerometers were initialized to collect simultaneous acceleration counts and steps data using 15-sec epochs. All reliability testing was completed using a mechanical shaker plate to…

  14. The James Webb Space Telescope

    NASA Technical Reports Server (NTRS)

    Gardner, Jonathan P.

    2012-01-01

    The James Webb Space Telescope is the scientific successor to the Hubble and Spitzer Space Telescopes. It will be a large (6.6m) cold (SDK) telescope launched into orbit around the second Earth-Sun Lagrange point. It is a partnership of NASA with the European and Canadian Space Agencies. The science goals for JWST include the formation of the first stars and galaxies in the early universe; the chemical, morphological and dynamical buildup of galaxies and the formation of stars and planetary systems. Recently, the goals have expanded to include studies of dark energy, dark matter, active galactic nuclei, exoplanets and Solar System objects. Webb will have four instruments: The Near-Infrared Camera, the Near-Infrared multi-object Spectrograph, and the Near-Infrared Imager and Slitless Spectrograph will cover the wavelength range 0.6 to S microns, while the Mid-Infrared Instrument will do both imaging and spectroscopy from 5 to 28.5 microns. The observatory is confirmed for launch in 2018; the design is complete and it is in its construction phase. Recent progress includes the completion of the mirrors, the delivery of the first flight instruments and the start of the integration and test phase.

  15. Weizmann Fast Astronomical Survey Telescope (WFAST)

    NASA Astrophysics Data System (ADS)

    Nir, Guy; Ofek, Eran Oded; Ben-Ami, Sagi; Manulis, Ilan; Gal-Yam, Avishay; Diner, Oz; Rappaport, Michael

    2017-01-01

    The Weizmann Fast Astronomical Survey Telescope (W-FAST) is an experiment designed to explore variability on sub-second time scales. When completed it will consist of two robotic 55-cm f/2 Schmidt telescopes. The optics is capable of providing $\\sim0.5$" image quality over 23 deg$^2$. The focal plane will be equipped with fast readout, low read-noise sCMOS detectors. The first generation focal plane is expected to have 6.2 deg$^2$ field of view. WFAST is designed to study occultations by solar system objects (KBOs and Oort cloud objects), short time scale stellar variability, and high resolution imaging via proper coaddition.

  16. Photon Sieve Space Telescope

    NASA Astrophysics Data System (ADS)

    Andersen, G.; Dearborn, M.; Hcharg, G.

    2010-09-01

    We are investigating new technologies for creating ultra-large apertures (>20m) for space-based imagery. Our approach has been to create diffractive primaries in flat membranes deployed from compact payloads. These structures are attractive in that they are much simpler to fabricate, launch and deploy compared to conventional three-dimensional optics. In this case the flat focusing element is a photon sieve which consists of a large number of holes in an otherwise opaque substrate. A photon sieve is essentially a large number of holes located according to an underlying Fresnel Zone Plate (FZP) geometry. The advantages over the FZP are that there are no support struts which lead to diffraction spikes in the far-field and non-uniform tension which can cause wrinkling of the substrate. Furthermore, with modifications in hole size and distribution we can achieve improved resolution and contrast over conventional optics. The trade-offs in using diffractive optics are the large amounts of dispersion and decreased efficiency. We present both theoretical and experimental results from small-scale prototypes. Several key solutions to issues of limited bandwidth and efficiency have been addressed. Along with these we have studied the materials aspects in order to optimize performance and achieve a scalable solution to an on-orbit demonstrator. Our current efforts are being directed towards an on-orbit 1m solar observatory demonstration deployed from a CubeSat bus.

  17. TCS software for the SONG telescope

    NASA Astrophysics Data System (ADS)

    Wang, Hai; Ren, Changzhi

    2014-07-01

    Stellar Observations Network Group, SONG, is a Danish led international collaboration project to construct a global network of small 1m telescope around the globe. The second 1 meter SONG node telescope designed by NIAOT is installed at Delingha site in west China. TCS hardware is based on PC, UMAC, tape encoder, motor and driver. TCS software is developed in powerful Qt Creator environment under stable Debian 6.0 operation system. The design rules are modularity and simplification. Several software modules work together to realize telescope usual function . Tracking algorithm is comprised of two parts. One is UMAC motion program, another is tracking thread in PC program. Communication between TCS and OCS is complicated. The method to process remote command is described.

  18. JWST Pathfinder Telescope Integration

    NASA Technical Reports Server (NTRS)

    Matthews, Gary W.; Kennard, Scott H.; Broccolo, Ronald T.; Ellis, James M.; Daly, Elizabeth A.; Hahn, Walter G.; Amon, John N.; Mt. Pleasant, Stephen M.; Texter, Scott; Atkinson, Charles B.; McKay, Andrew; Levi, Joshua; Keski-Kuha, Ritva; Feinberg, Lee

    2015-01-01

    The James Webb Space Telescope (JWST) is a 6.5m, segmented, IR telescope that will explore the first light of the universe after the big bang. In 2014, a major risk reduction effort related to the Alignment, Integration, and Test (AI&T) of the segmented telescope was completed. The Pathfinder telescope includes two Primary Mirror Segment Assemblies (PMSA's) and the Secondary Mirror Assembly (SMA) onto a flight-like composite telescope backplane. This pathfinder allowed the JWST team to assess the alignment process and to better understand the various error sources that need to be accommodated in the flight build. The successful completion of the Pathfinder Telescope provides a final integration roadmap for the flight operations that will start in August 2015.

  19. Automated telescope scheduling

    NASA Technical Reports Server (NTRS)

    Johnston, Mark D.

    1988-01-01

    With the ever increasing level of automation of astronomical telescopes the benefits and feasibility of automated planning and scheduling are becoming more apparent. Improved efficiency and increased overall telescope utilization are the most obvious goals. Automated scheduling at some level has been done for several satellite observatories, but the requirements on these systems were much less stringent than on modern ground or satellite observatories. The scheduling problem is particularly acute for Hubble Space Telescope: virtually all observations must be planned in excruciating detail weeks to months in advance. Space Telescope Science Institute has recently made significant progress on the scheduling problem by exploiting state-of-the-art artificial intelligence software technology. What is especially interesting is that this effort has already yielded software that is well suited to scheduling groundbased telescopes, including the problem of optimizing the coordinated scheduling of more than one telescope.

  20. Airborne Infrared Astronomical Telescopes

    NASA Astrophysics Data System (ADS)

    Erickson, Edwin F.

    2017-01-01

    A unique program of infrared astronomical observations from aircraft evolved at NASA’s Ames Research Center, beginning in the 1960s. Telescopes were flown on a Convair 990, a Lear Jet, and a Lockheed C-141 - the Kuiper Airborne Observatory (KAO) - leading to the planning and development of SOFIA: a 2.7 m telescope now flying on a Boeing 747SP. The poster describes these telescopes and highlights of some of the scientific results obtained from them.

  1. Video Telescope Operating Microscopy.

    PubMed

    Divers, Stephen J

    2015-09-01

    Exotic pet veterinarians frequently have to operate on small animals, and magnification is commonly used. Existing endoscopy equipment can be used with a mechanical arm and telescope to enable video telescope operating microscopy. The additional equipment items and their specifics are described, and several case examples are provided.

  2. Goddard Robotic Telescope

    SciTech Connect

    Sakamoto, Takanori; Donato, Davide; Gehrels, Neil; Okajima, Takashi; Ukwatta, Tilan N.

    2009-05-25

    We are constructing the 14'' fully automated optical robotic telescope, Goddard Robotic Telescope (GRT), at the Goddard Geophysical and Astronomical Observatory. The aims of our robotic telescope are 1) to follow-up the Swift/Fermi Gamma-Ray Bursts (GRBs) and 2) to perform the coordinated optical observations of the Fermi/Large Area Telescope (LAT) Active Galactic Nuclei (AGN). Our telescope system consists of the 14'' Celestron Optical Telescope Assembly (OTA), the Astro-Physics 1200GTO mount, the Apogee U47 CCD camera, the JMI's electronic focuser, and the Finger Lake Instrumentation's color filter wheel with U, B, V, R and I filters. With the focal reducer, 20'x20' field of view has been achieved. The observatory dome is the Astro Haven's 7 ft clam-shell dome. We started the scientific observations on mid-November 2008. While not observing our primary targets (GRBs and AGNs), we are planning to open our telescope time to the public for having a wider use of our telescope in both a different research field and an educational purpose.

  3. Observatories and Telescopes of Modern Times

    NASA Astrophysics Data System (ADS)

    Leverington, David

    2016-11-01

    Preface; Part I. Optical Observatories: 1. Palomar Mountain Observatory; 2. The United States Optical Observatory; 3. From the Next Generation Telescope to Gemini and SOAR; 4. Competing primary mirror designs; 5. Active optics, adaptive optics and other technical innovations; 6. European Northern Observatory and Calar Alto; 7. European Southern Observatory; 8. Mauna Kea Observatory; 9. Australian optical observatories; 10. Mount Hopkins' Whipple Observatory and the MMT; 11. Apache Point Observatory; 12. Carnegie Southern Observatory (Las Campanas); 13. Mount Graham International Optical Observatory; 14. Modern optical interferometers; 15. Solar observatories; Part II. Radio Observatories: 16. Australian radio observatories; 17. Cambridge Mullard Radio Observatory; 18. Jodrell Bank; 19. Early radio observatories away from the Australian-British axis; 20. The American National Radio Astronomy Observatory; 21. Owens Valley and Mauna Kea; 22. Further North and Central American observatories; 23. Further European and Asian radio observatories; 24. ALMA and the South Pole; Name index; Optical observatory and telescope index; Radio observatory and telescope index; General index.

  4. Asteroid observations with NCSFCT's AZT-8 telescope

    NASA Astrophysics Data System (ADS)

    Kozhukhov, O. M.; Maigurova, N. V.

    2017-02-01

    The asteroid observations of the small Solar System bodies were carried out with the AZT-8 telescope (D = 0.7 m, f/4) of the National Center of Space Facilities Control and Testing (NCSFCT) during 2010-2013. The telescope is located near Yevpatoria, the observatory code according IAU is B17. The observational program included perturbed main belt asteroids and NEO's for the GAIA FUN-SSO Company. The MPC database contains more than 4500 asteroids positions and magnitudes obtained during this period at AZT-8 telescope. The article presents analysis of the positional accuracy of B17 observations obtained from the comparison with the JPL HORIZONS ephemeris, and data from AstD-yS-2 and NEODyS-2 web services.

  5. Telescope Adaptive Optics Code

    SciTech Connect

    Phillion, D.

    2005-07-28

    The Telescope AO Code has general adaptive optics capabilities plus specialized models for three telescopes with either adaptive optics or active optics systems. It has the capability to generate either single-layer or distributed Kolmogorov turbulence phase screens using the FFT. Missing low order spatial frequencies are added using the Karhunen-Loeve expansion. The phase structure curve is extremely dose to the theoreUcal. Secondly, it has the capability to simulate an adaptive optics control systems. The default parameters are those of the Keck II adaptive optics system. Thirdly, it has a general wave optics capability to model the science camera halo due to scintillation from atmospheric turbulence and the telescope optics. Although this capability was implemented for the Gemini telescopes, the only default parameter specific to the Gemini telescopes is the primary mirror diameter. Finally, it has a model for the LSST active optics alignment strategy. This last model is highly specific to the LSST

  6. Solar coronal non-thermal processes (Solar Maximum Mission)

    NASA Technical Reports Server (NTRS)

    Hudson, H. S.

    1983-01-01

    The Solar Maximum Mission was used to study solar coronal phenomena in hard X-radiation, since its instrument complement included the first solar hard X-ray telescope. Phenomena related to those discovered from OSO-5 and OSO-7 observations were emphasized.

  7. Networked Automatic Optical Telescopes

    NASA Astrophysics Data System (ADS)

    Mattox, J. R.

    2000-05-01

    Many groups around the world are developing automated or robotic optical observatories. The coordinated operation of automated optical telescopes at diverse sites could provide observing prospects which are not otherwise available, e.g., continuous optical photometry without diurnal interruption. Computer control and scheduling also offers the prospect of effective response to transient events such as γ -ray bursts. These telescopes could also serve science education by providing high-quality CCD data for educators and students. The Automatic Telescope Network (ATN) project has been undertaken to promote networking of automated telescopes. A web site is maintained at http://gamma.bu.edu/atn/. The development of such networks will be facilitated by the existence of standards. A set of standard commands for instrument and telescope control systems will allow for the creation of software for an ``observatory control system'' which can be used at any facility which complies with the TCS and ICS standards. Also, there is a strong need for standards for the specification of observations to be done, and reports on the results and status of observations. A proposed standard for this is the Remote Telescope Markup Language (RTML), which is expected to be described in another poster in this session. It may thus be feasible for amateur-astronomers to soon buy all necessary equipment and software to field an automatic telescope. The owner/operator could make otherwise unused telescope time available to the network in exchange for the utilization of other telescopes in the network --- including occasional utilization of meter-class telescopes with research-grade CCD detectors at good sites.

  8. Productivity and Impact of Optical Telescopes

    NASA Astrophysics Data System (ADS)

    Trimble, Virginia; Zaich, Paul; Bosler, Tammy

    2005-01-01

    In 2001, about 2100 papers appearing in 18 journals reported and/or analyzed data collected with ground-based optical and infrared telescopes and the Hubble Space Telescope. About 250 telescopes were represented, including 25 with primary mirror diameters of 3 m or larger. The subjects covered in the papers divide reasonably cleanly into 20 areas, from solar system to cosmology. These papers were cited 24,354 times in 2002 and 2003, for a mean rate of 11.56 citations per paper, or 5.78 citations per paper per year (sometimes called impact or impact factor). We analyze here the distributions of the papers, citations, and impact factors among the telescopes and subject areas and compare the results with those of a very similar study of papers published in 1990-1991 and cited in 1993. Some of the results are exactly as expected. Big telescopes produce more papers and more citations per paper than small ones. There are fashionable topics (cosmology and exoplanets) and less fashionable ones (binary stars and planetary nebulae). And the Hubble Space Telescope has changed the landscape a great deal. Some other results surprised us but are explicable in retrospect. Small telescopes on well-supported sites (La Silla and Cerro Tololo, for instance) produce papers with larger impact factors than similar sized telescopes in relative isolation. Not just the fraction of all papers, but the absolute numbers of papers coming out of the most productive 4 m telescopes of a decade ago have gone down. The average number of citations per paper per year resulting from the 38 telescopes (2 m and larger) considered in 1993 has gone up 38%, from 3.48 to 4.81, a form, perhaps, of grade inflation. And 53% of the 2100 papers and 38% of the citations (including 44% of the papers and 31% of the citations from mirrors of 3 m and larger) pertain to topics often not regarded as major drivers for the next generation of still larger ground-based telescopes.

  9. Dutch Open Telescope: Status and Prospects

    NASA Astrophysics Data System (ADS)

    Rutten, R. J.; Hammerschlag, R. H.; Bettonvil, F. M.; Suetterlin, P.

    2000-10-01

    The Dutch Open Telescope (DOT) on La Palma in the Canary Islands is a small but revolutionary solar telescope of which the image quality matches the superb imaging of the Swedish Vacuum Solar Telescope (from whose building the DOT is operated). The DOT is an open parabolic 45cm reflector on an open 15m high tower, relying on mirror flushing by the trade winds that bring the best seeing at La Palma to avoid internal turbulence. A water-cooled field stop in the primary image reflects most sunlight and heat out of the telescope. The first data from the DOT combined with speckle reconstruction have yielded sunspot movies of outstanding quality. At present, a multi-channel imaging system is in construction for simultaneous registration of speckle sequences in the G band, in Ca II K and in Hα. The data pipeline permits continuous speckle data acquisition up to 0.5 Tb per day. The advantage of speckle reconstruction over adaptive optics is the much larger field of the restored scene, with the DOT camera's 100x130 arcsec at 0.2 arcsec resolution. The DOT science program is to study magnetic topology and dynamics throughout the photosphere and chromosphere.

  10. Two Easily Made Astronomical Telescopes.

    ERIC Educational Resources Information Center

    Hill, M.; Jacobs, D. J.

    1991-01-01

    The directions and diagrams for making a reflecting telescope and a refracting telescope are presented. These telescopes can be made by students out of plumbing parts and easily obtainable, inexpensive, optical components. (KR)

  11. The large binocular telescope.

    PubMed

    Hill, John M

    2010-06-01

    The Large Binocular Telescope (LBT) Observatory is a collaboration among institutions in Arizona, Germany, Italy, Indiana, Minnesota, Ohio, and Virginia. The telescope on Mount Graham in Southeastern Arizona uses two 8.4 m diameter primary mirrors mounted side by side. A unique feature of the LBT is that the light from the two Gregorian telescope sides can be combined to produce phased-array imaging of an extended field. This cophased imaging along with adaptive optics gives the telescope the diffraction-limited resolution of a 22.65 m aperture and a collecting area equivalent to an 11.8 m circular aperture. This paper describes the design, construction, and commissioning of this unique telescope. We report some sample astronomical results with the prime focus cameras. We comment on some of the technical challenges and solutions. The telescope uses two F/15 adaptive secondaries to correct atmospheric turbulence. The first of these adaptive mirrors has completed final system testing in Firenze, Italy, and is planned to be at the telescope by Spring 2010.

  12. Gemini telescope structure design

    NASA Astrophysics Data System (ADS)

    Raybould, Keith; Gillett, Paul E.; Hatton, Peter; Pentland, Gordon; Sheehan, Mike; Warner, Mark

    1994-06-01

    The Gemini project is an international collaboration to design, fabricate, and assemble two 8 M telescopes, one on Mauna Kea in Hawaii, the other on Cerro Pachon in Chile. The telescopes will be national facilities designed to meet the Gemini Science Requirements (GSR), a document developed by the Gemini Science Committee (GSC) and the national project scientists. The Gemini telescope group, based on Tucson, has developed a telescope structure to meet the GSR. This paper describes the science requirements that have technically driven the design, and the features that have been incorporated to meet these requirements. This is followed by a brief description of the telescope design. Finally, analyses that have been performed and development programs that have been undertaken are described briefly. Only the designs that have been performed by the Gemini Telescope Structure, Building and Enclosure Group are presented here; control, optical systems, acquisition and guiding, active and adaptive optics, Cassegrain rotator and instrumentation issues are designed and managed by others and will not be discussed here, except for a brief description of the telescope configurations to aid subsequent discussions.

  13. HUBBLE SPACE TELESCOPE View of the Heart of Ursa Minor

    NASA Astrophysics Data System (ADS)

    Battinelli, Paolo; Demers, Serge

    1999-04-01

    Hubble Space Telescope F606W observations to 26th magnitude are used to investigate the stellar distribution in the center of the Ursa Minor dwarf spheroidal galaxy. The central surface density is found to be low, less than 700 stars arcmin^-2, with no sign of a pronounced cusp. The maximum of the surface density is not found at our adopted center but in a ringlike structure some 13" from it. We identify this feature with the subclustering identified by Olszewski & Aaronson, who believed that it was off-center. The currently accepted King's structural parameters, r_c and r_t, of Ursa Minor are found to be unsuitable to represent the stellar surface density near the center. Our star counts are used to obtain a lower limit of the central stellar density without the use of the velocity dispersion. We find a lower limit of 1.7+/-1.1 M_solar pc^-3 from stars that were counted. By extrapolating the mass function to lower masses, we estimate that the true density could increase be a factor of 7.

  14. Comet C/2012 S1 (ISON): Observations of the Dust Grains from SOFIA and of the Atomic Gas from NSO Dunn and McMath-Pierce Solar Telescopes (Invited)

    NASA Astrophysics Data System (ADS)

    Wooden, D. H.; Woodward, C. E.; Harker, D. E.; Kelley, M. S.; Sitko, M.; Reach, W. T.; De Pater, I.; Gehrz, R. D.; Kolokolova, L.; Cochran, A. L.; McKay, A. J.; Reardon, K.; Cauzzi, G.; Tozzi, G.; Christian, D. J.; Jess, D. B.; Mathioudakis, M.; Lisse, C. M.; Morgenthaler, J. P.; Knight, M. M.

    2013-12-01

    Comet C/2012 S1 (ISON) is unique in that it is a dynamically new comet derived from the Oort cloud reservoir of comets with a sun-grazing orbit. Infrared (IR) and visible wavelength observing campaigns were planned on NASA's Stratospheric Observatory For Infrared Astronomy (SOFIA) and on National Solar Observatory Dunn (DST) and McMath-Pierce Solar Telescopes, respectively. We highlight our early results. SOFIA (+FORCAST [1]) mid- to far-IR images and spectroscopy (~5-35 μm) of the dust in the coma of ISON are to be obtained by the ISON-SOFIA Team during a flight window 2013 Oct 21-23 UT (r_h≈1.18 AU). Dust characteristics, identified through the 10 μm silicate emission feature and its strength [2], as well as spectral features from cometary crystalline silicates (Forsterite) at 11.05-11.2 μm, and near 16, 19, 23.5, 27.5, and 33 μm are compared with other Oort cloud comets that span the range of small and/or highly porous grains (e.g., C/1995 O1 (Hale-Bopp) [3,4,5] and C/2001 Q4 (NEAT) [6]) to large and/or compact grains (e.g., C/2007 N4 (Lulin) [7] and C/2006 P1 (McNaught) [8]). Measurement of the crystalline peaks in contrast to the broad 10 and 20 μm amorphous silicate features yields the cometary silicate crystalline mass fraction [9], which is a benchmark for radial transport in our protoplanetary disk [10]. The central wavelength positions, relative intensities, and feature asymmetries for the crystalline peaks may constrain the shapes of the crystals [11]. Only SOFIA can look for cometary organics in the 5-8 μm region. Spatially resolved measurements of atoms and simple molecules from when comet ISON is near the Sun (r_h< 0.4 AU, near Nov-20--Dec-03 UT) were proposed for by the ISON-DST Team. Comet ISON is the first comet since comet Ikeya-Seki (1965f) [12,13] suitable for studying the alkalai metals Na and K and the atoms specifically attributed to dust grains including Mg, Si, Fe, as well as Ca. DST's Horizontal Grating Spectrometer (HGS) measures

  15. Origins Space Telescope: Community Participation

    NASA Astrophysics Data System (ADS)

    Carey, Sean J.; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its imagers and spectrographs will enable a variety of surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. This poster will outline the ways in which the astronomical community can participate in the STDT activities and a summary of tools that are currently available or are planned for the community during the study. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu.

  16. Origins Space Telescope: Study Plan

    NASA Astrophysics Data System (ADS)

    Cooray, Asantha R.; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. This presentation will provide a summary of the OST STDT, the OST Study Team based at NASA Goddard Space Flight Center, study partners, and the advisory panel to the study. This presentation will also summarize recent activities, including the process used to reach a decision on the mission architecture, the identification of key science drivers, and the key study milestones between 2017 and 2020.

  17. Telescopic vision contact lens

    NASA Astrophysics Data System (ADS)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  18. Undergraduate Research with a Small Radio Telescope

    NASA Astrophysics Data System (ADS)

    Fisher, P. L.; Williams, G. J.

    2001-11-01

    We describe the construction of a small radio telescope system at ULM and the role of radio astronomy in undergraduate education. The heart of the system is the Small Radio Telescope (SRT), which is a modified satellite TV antenna and custom receiver purchased from MIT Haystack Observatory. This telescope measures the brightness of many celestial objects at wavelengths near 21 cm. The system consists of various components to control dish movement, as well as perform analog to digital conversions allowing analysis of collected data. Undergraduate students have participated in the construction of the hardware and the task of interfacing the hardware to software on two GNU/Linux computer systems. The construction of the telescope and analysis of data allow the students to employ key concepts from mechanics, optics, electrodynamics, and thermodynamics, as well as computer and electronics skills. We will report preliminary results of solar observations conducted with this instrument and with the MIT Haystack Observatory 37m radio telescope. This work was supported by Louisiana Board of Regents grant LEQSF-ENH-UG-16, NASA/LaSPACE LURA R109139 and ULM Development Foundation Grant 97317.

  19. Multi-use lunar telescopes

    NASA Technical Reports Server (NTRS)

    Drummond, Mark; Hine, Butler; Genet, Russell; Genet, David; Talent, David; Boyd, Louis; Trueblood, Mark; Filippenko, Alexei V. (Editor)

    1991-01-01

    The objective of multi-use telescopes is to reduce the initial and operational costs of space telescopes to the point where a fair number of telescopes, a dozen or so, would be affordable. The basic approach is to develop a common telescope, control system, and power and communications subsystem that can be used with a wide variety of instrument payloads, i.e., imaging CCD cameras, photometers, spectrographs, etc. By having such a multi-use and multi-user telescope, a common practice for earth-based telescopes, development cost can be shared across many telescopes, and the telescopes can be produced in economical batches.

  20. Multi-use lunar telescopes

    NASA Technical Reports Server (NTRS)

    Genet, Russell M.; Genet, David R.; Talent, David L.; Drummond, Mark; Hine, Butler P.; Boyd, Louis J.; Trueblood, Mark

    1992-01-01

    The objective of multi-use telescopes is to reduce the initial and operational costs of space telescopes to the point where a fair number of telescopes, a dozen or so, would be affordable. The basic approach is to develop a common telescope, control system, and power and communications subsystem that can be used with a wide variety of instrument payloads, i.e., imaging CCD cameras, photometers, spectrographs, etc. By having such a multi-use and multi-user telescope, a common practice for earth-based telescopes, development cost can be shared across many telescopes, and the telescopes can be produced in economical batches.

  1. Asteroid observations with the Hubble Space Telescope and the Space Infrared Telescope Facility

    NASA Technical Reports Server (NTRS)

    Zellner, B.; Wells, Eddie N.; Chapman, Clark R.; Cruikshank, D. P.

    1989-01-01

    The ways that the asteroids can be studied with the Hubble Space Telescope (HST) and the Space Infrared Telescope Facility (SIRTF) are examined. Spectrophotometry of asteroids and the study of asteroid surfaces, shape, spins, configuration, normal reflectance, and limb darkening of asteroids using the HST are addressed along with the detection of asteroid satellites and the discovery of small asteroids using the HST. The relation of the HST to its ground system is described, as are the spectrophotometric instruments of the HST. Imaging with the HST using the Faint Object Camera and the Wide Field and Planetary Camera is examined. Finally, the SIRTF observatory, instrumentation, and capabilities for solar system science are discussed.

  2. Webb Telescope: Planetary Evolution

    NASA Video Gallery

    Stars and planets form in the dark, inside vast, cold clouds of gas and dust. The James Webb Space Telescope's large mirror and infrared sensitivity will let astronomers peer inside dusty knots whe...

  3. Holographic telescope arrays.

    PubMed

    Lohmann, A W; Sauer, F

    1988-07-15

    A typical job in optical computing is to illuminate an array of small nonlinear optical components, separated by wide gaps to avoid crosstalk. We do this by letting a wide uniform beam fall onto a densely packed array of minifying telescopes. Each telescope produces a narrow bundle of parallel rays which illuminates one of the nonlinear optical components. The holographic telescopes can do more than change the width of the bundles of parallel rays. Their image forming capability allows the transmission of many pixels per channel in parallel. The pair of lenslets of a single holographic telescope (Kepler or Galilean) is produced in rigid coupling. The monolithic production avoids adjusting the two lenslets later on.

  4. Next Generation Space Telescope

    NASA Technical Reports Server (NTRS)

    Mather, John; Stockman, H. S.; Fisher, Richard R. (Technical Monitor)

    2000-01-01

    The Next Generation Space Telescope (NGST), planned for launch in 2009, will be an 8-m class radiatively cooled infrared telescope at the Lagrange point L2. It will cover the wavelength range from 0.6 to 28 microns with cameras and spectrometers, to observe the first luminous objects after the Big Bang, and the formation, growth, clustering, and evolution of galaxies, stars, and protoplanetary clouds, leading to better understanding of our own Origins. It will seek evidence of the cosmic dark matter through its gravitational effects. With an aperture three times greater than the Hubble Space Telescope, it will provide extraordinary advances in capabilities and enable the discovery of many new phenomena. It is a joint project of the NASA, ESA, and CSA, and scientific operations will be provided by the Space Telescope Science Institute.

  5. Telescopes and space exploration

    NASA Technical Reports Server (NTRS)

    Brandt, J. C.; Maran, S. P.

    1982-01-01

    Progress in contemporary astronomy and astrophysics is shown to depend on complementary investigations with sensitive telescopes operating in several wavelength regions, some of which can be on the Earth's surface and others of which must be in space.

  6. Composite Space Telescope Truss

    NASA Video Gallery

    NASA engineers are recycling an idea for a lightweight, compact space telescope structure from the early 1990s. The 315 struts and 84 nodes were originally designed to enable spacewalking astronaut...

  7. New catadioptric telescope

    NASA Astrophysics Data System (ADS)

    Richter, J. L.

    1981-01-01

    The Acme telescope is a compound telescope that resembles the familiar Cassegrain type except that the main mirror is spherical and the secondary is an achromatic doublet mangin mirror. Three 6-in. aperture f/15 telescope designs are described. With a cemented, all spherical surface achromangin mirror, there is a small amount of coma which can be eliminated by redesigning with an air space between the crown and flint elements of the achromangin mirror, or by cementing them with one of the concave external surfaces of achromangin figured to an hyperboloid. In the examples, the spherical aberration is nil and the chromatic residual is roughly half that of an achromatic objective of the same speed, aperture, and glass types. Readily available crown and flint glasses such as Schott BK-7 and F-2 are entirely satisfactory for the achromangin mirror. Also considered are two examples of Acme-like telescopes with paraboloidal instead of spherical main mirrors.

  8. Large Binocular Telescope Project

    NASA Astrophysics Data System (ADS)

    Hill, John M.

    1997-03-01

    The large binocular telescope (LBT) project have evolved from concepts first proposed in 1985. The present partners involved in the design and construction of this 2 by 8.4 meter binocular telescope are the University of Arizona, Italy represented by the Osservatorio Astrofisico di Arcetri and the Research Corporation based in Tucson, Arizona. These three partners have committed sufficient funds to build the enclosure and the telescope populated with a single 8.4 meter optical train -- approximately 40 million dollars (1989). Based on this commitment, design and construction activities are now moving forward. Additional partners are being sought. The next mirror to be cast at the Steward Observatory Mirror Lab in the fall of 1996 will be the first borosilicate honeycomb primary for LBT. The baseline optical configuration of LBT includes wide field Cassegrain secondaries with optical foci above the primaries to provide a corrected one degree field at F/4. The infrared F/15 secondaries are a Gregorian design to allow maximum flexibility for adaptive optics. The F/15 secondaries are undersized to provide a low thermal background focal plane which is unvignetted over a 4 arcminute diameter field-of-view. The interferometric focus combining the light from the two 8.4 meter primaries will reimage two folded Gregorian focal planes to a central location. The telescope elevation structure accommodates swing arms which allow rapid interchange of the various secondary and tertiary mirrors. Maximum stiffness and minimal thermal disturbance continue to be important drivers for the detailed design of the telescope. The telescope structure accommodates installation of a vacuum bell jar for aluminizing the primary mirrors in-situ on the telescope. The detailed design of the telescope structure will be completed in 1996 by ADS Italia (Lecco) and European Industrial Engineering (Mestre). The final enclosure design is now in progress at M3 Engineering (Tucson), EIE and ADS Italia

  9. The Discovery Channel Telescope: a wide-field telescope in Northern Arizona

    NASA Astrophysics Data System (ADS)

    Sebring, Thomas A.; Dunham, Edward W.; Millis, Robert L.

    2004-10-01

    Lowell Observatory has initiated the development of a four meter class optical telescope with significant capabilities for solar system and broad spectrum astronomical research. Key to the Discovery Channel Telescope (DCT) is the ability to rapidly switch between 2 degree FOV imaging via a prime focus camera to 30 arc min FOV instrumentation at Ritchey-Chrétien (RC) focus. The telescope is to be constructed at approximately 7700 feet altitude, Southeast of Flagstaff, Arizona at a site which has exhibited 0.6 arc sec best quartile seeing. The telescope will feature active optics and alignment capability and the Prime Focus Instrument will feature a Mosaic Focal Plane array of 40 2k x 4k CCDs. The RC instrument payload will be approximately 5000 lbs, allowing either large instruments or suites of co-mounted instruments. This telescope is being developed in partnership with Discovery Communications, Inc. (DCI), who will utilize the DCT and the association with Lowell Observatory to develop educational programming about astronomy and technology. The telescope will be a substantial enhancement to the current capabilities of Lowell Observatory.

  10. The Telescope for Observation of the Photosphere of the Sun

    NASA Astrophysics Data System (ADS)

    Efimenko, V.; Kaminsky, S.

    2015-12-01

    Visual observation of solar spots on Astronomical observatory began in 1923. Since 1951 photographic observation with use of photographic plates of AGFA and ORWO were conducted. Transition from photographic plates to CCD matrixes demands modernization or replacement of thetelescope. The made analysis taking into account the parameters a CCD matrixes of the receiver proves need of production of the new telescope.Calculations, modeling and production of the telescope were executed by opportunities of Astronomical observatory. Tests of the telescope withthe digital camera showed that quality of images satisfactory, resolution of the telescope answers settlement and the telescope with the digitalcamera can be used for receiving pictures of the photosphere of the Sun. The average error of definition of numbers of Wolf doesn't exceed 10 %.

  11. Interplanetary scintillation observations with the Cocoa Cross radio telescope

    NASA Technical Reports Server (NTRS)

    Cronyn, W. M.; Shawhan, S. D.; Erskine, F. T.; Huneke, A. H.; Mitchell, D. G.

    1976-01-01

    Physical and electrical parameters for the 34.3-MHz Cocoa Cross radio telescope are given. The telescope is dedicated to the determination of solar-wind characteristics in and out of the ecliptic plane through measurement of electron-density irregularity structure as determined from IPS (interplanetary scintillation) of natural radio sources. The collecting area (72,000 sq m), angular resolution (0.4 deg EW by 0.6 deg NS), and spatial extent (1.3 km EW by 0.8 km NS) make the telescope well suited for measurements of IPS index and frequency scale for hundreds of weak radio sources without serious confusion effects.

  12. Remote Observing with Robotic Telescopes on Mt. Hopkins

    NASA Astrophysics Data System (ADS)

    Henry, G. W.

    1994-12-01

    Tennessee State University conducts remote, automatic observing with four robotic telescopes located at the Fairborn Observatory site on Mt. Hopkins, 30 miles south of Tucson. These telescopes run completely unattended; a site control computer monitors the time of day and weather conditions, opens the roof at the beginning of the night, informs each telescope's control computer when observations can begin, and shuts down the site when morning twilight or bad weather intervenes. The Automatic Telescope Instruction Set (ATIS) allows us to program the telescopes and to retrieve data via ASCII file transfers over the Internet. ATIS also includes a set of target selection rules that allow the telescopes to operate autonomously for many weeks or months without our intervention. Over the past several years, Tennessee State University has collaborated with Fairborn to develop precision photometers, software, observing techniques and quality control procedures that have culminated in the automatic acquisition and reduction of high volumes of data with millimagnitude precision. The telescopes are being used for a variety long-term monitoring programs that would be difficult or impossible (and prohibitively expensive) to conduct by traditional manual methods. A 10-inch telescope is dedicated to observations of semi-regular variable stars to uncover their multiple periods. A 16-inch telescope is dedicated to long-term observations of chromospherically active (single and binary) stars to search for activity cycles. Solar-type stars are being monitored by 30-inch and 32-inch telescopes to measure the subtle luminosity variations of these stars associated with their long-term magnetic variations as measured by the HK Project at Mt. Wilson Observatory. An additional project in collaboration with the NASA Ames Research Center seeks to apply artificial intelligence techniques to improve the scheduling of the observations on these telescopes and to develop a software package to

  13. The Multiple-Mirror Telescope

    ERIC Educational Resources Information Center

    Carleton, Nathaniel P.; Hoffmann, William F.

    1978-01-01

    Describes the basic design and principle of operating an optical-infrared telescope, the MMT. This third largest telescope in the world represents a new stage in telescope design; it uses a cluster of six reflecting telescopes, and relies on an automatic sensing and control system. (GA)

  14. VISTA Telescope opto-mechanical integration

    NASA Astrophysics Data System (ADS)

    Jeffers, Paul; Henry, David

    2010-07-01

    VISTA1 is an infrared survey telescope which delivers 0.5 arc second images over a 1.65 degree diameter unvignetted field of view. The project was split into separate work-packages, which after successful individual acceptance, were integrated by the project office. The main mechanical integration is the matching up of two sides of a controlled interface and should be a straightforward process. This covers the mounting of the M2 Hexapod, the installation of the M2 mirror assembly onto the M2 Hexapod, the M1 attachment to the M1 support system components and installation of the instrument mass simulator. The second stage of this integration is the mechanical alignment of the optical elements (i.e. M1 & M2) to the telescope mechanical axis. This is achieved through use of jigs and alignment equipment combined with the inbuilt adjustment in both the M2 on it's Hexapod and the manual adjustment of the M1 on its positional definers. This then leaves the telescope in a state ready to start optical commissioning using a Shack Hartman wavefront sensor. This paper deals with the mechanical integration and alignment of the telescope components up to the start of optical commissioning. There will be discussion of the build-up of information through the separate component acceptance details, to the equipment methodology, preparation and actual integration of the different systems. There will also be discussion of lessons learned.

  15. Design of an afocal telescope for the ARIEL mission

    NASA Astrophysics Data System (ADS)

    Da Deppo, Vania; Middleton, Kevin; Focardi, Mauro; Morgante, Gianluca; Pace, Emanuele; Claudi, Riccardo; Micela, Giuseppina

    2016-07-01

    ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is one of the three candidates for the next ESA medium-class science mission (M4) expected to be launched in 2026. This mission will be devoted to observe spectroscopically in the infrared (IR) a large population of known transiting planets in our Galaxy. ARIEL is based on a 1-m class telescope ahead of two spectrometer channels covering the band 1.95 to 7.8 microns. In addition there are four photometric channels: two wide band, also used as fine guidance sensors, and two narrow band. During its 3.5 years operations from L2 orbit, ARIEL will continuously observe exoplanets transiting their host star. The ARIEL design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is an off-axis portion of a two-mirror classic telescope coupled to a tertiary off-axis paraboloidal mirror providing a collimating output beam. The telescope and optical bench operating temperatures, as well as those of some subsystems, will be monitored and fine tuned/stabilised mainly by means of a thermal control subsystem (TCU - Telescope Control Unit) working in closed-loop feedback and hosted by the main Payload electronics unit, i.e. the Instrument Control Unit (ICU). In this paper the telescope requirements will be given together with the foreseen design. The technical solution chosen to passively cool the telescope unit will be detailed discussed.

  16. Telescopes in education

    NASA Astrophysics Data System (ADS)

    Yessayian, Rick

    Imagine sitting in your classroom with your students and controlling a Research Grade 24 inch telescope. You control where it points, you control the duration of the exposure of a high grade CCD camera, and you control all of this within your school day, on a camera half way around the globe, in real time. You can hear the telescope moving, talk to the operator sitting atop historic Mt. Wilson Observatory in California. You might be looking at comets, asteroids, galaxies, nebulas or a host of other interesting celestial objects. Perhaps you have students that are up to a real challenge -- doing real science! Students in our program have contributed the discovery of a new variable star, to the Pluto Express project, to the search for supernovas, and the collection of images of intersecting galaxies. These are among the many possible projects you might choose from. The age and ability of your students are taken into account when you choose your project. Students from Kindergarten through Grade 12 have participated in this free program. A new robotic telescope was added at Mount Wilson in 1999. The telescope is a Celestron 14" SCT mounted on a Bisque Paramount GT-1100 with an Apogee AP-7 CCD camera (512X512 pixels). In the Spring of 2001, we duplicated the 14" robotic telescope configuration and placed it at the Las Campanas Observatory, Chile (operated by the Carnegie Observatories). I installed the system in late September, 2001, and we began testing. The system requires one more upgrade and some hardware adjustments, which I will complete in June, 2002. We duplicated another 14" robotic telescope, and sent it to Brisbane Australia in January, 2002. The grand opening of the telescope will be in August 2002.

  17. Starlab ultraviolet /UV/ astronomy telescope facility

    NASA Technical Reports Server (NTRS)

    Richard, H. L.; Oberheuser, J. H.

    1979-01-01

    The paper describes a 1-m high-resolution wide field-of-view telescope (Starlab) to be used on board the Space Shuttle. The purpose of Starlab is to obtain optical astronomical observations in the UV domain of the spectrum. The discussion focuses on scientific programs and technical description of the Starlab. The use of photographic film and rapid reconfiguration is possible because Starlab is flown in the Shuttle-attached mode. The Starlab uses an f/15-modified Ritchey-Chretien telescope, followed by an instrument selector that gives access to the conventional Cassegrain focus or, by inserting a diagonal mirror, to a radial focal plane. Results of five critical subsystem-design studies confirm the feasibility of using state-of-the-art design practices in meeting the Starlab science and engineering requirements.

  18. SWAYING THREADS OF A SOLAR FILAMENT

    SciTech Connect

    Lin, Y.; Engvold, O.; Langangen, Oe.; Rouppe van der Voort, L. H. M.; Soler, R.; Ballester, J. L.; Oliver, R.

    2009-10-10

    From recent high-resolution observations obtained with the Swedish 1 m Solar Telescope in La Palma, we detect swaying motions of individual filament threads in the plane of the sky. The oscillatory characters of these motions are comparable with oscillatory Doppler signals obtained from corresponding filament threads. Simultaneous recordings of motions in the line of sight and in the plane of the sky give information about the orientation of the oscillatory plane. These oscillations are interpreted in the context of the magnetohydrodynamic (MHD) theory. Kink MHD waves supported by the thread body are proposed as an explanation of the observed thread oscillations. On the basis of this interpretation and by means of seismological arguments, we give an estimation of the thread Alfven speed and magnetic field strength by means of seismological arguments.

  19. Monolithic afocal telescope

    NASA Technical Reports Server (NTRS)

    Roberts, William T. (Inventor)

    2010-01-01

    An afocal monolithic optical element formed of a shallow cylinder of optical material (glass, polymer, etc.) with fast aspheric surfaces, nominally confocal paraboloids, configured on the front and back surfaces. The front surface is substantially planar, and this lends itself to deposition of multi-layer stacks of thin dielectric and metal films to create a filter for rejecting out-of-band light. However, an aspheric section (for example, a paraboloid) can either be ground into a small area of this surface (for a Cassegrain-type telescope) or attached to the planar surface (for a Gregorian-type telescope). This aspheric section of the surface is then silvered to create the telescope's secondary mirror. The rear surface of the cylinder is figured into a steep, convex asphere (again, a paraboloid in the examples), and also made reflective to form the telescope's primary mirror. A small section of the rear surface (approximately the size of the secondary obscuration, depending on the required field of the telescope) is ground flat to provide an unpowered surface through which the collimated light beam can exit the optical element. This portion of the rear surface is made to transmit the light concentrated by the reflective surfaces, and can support the deposition of a spectral filter.

  20. Spectroradiometry with space telescopes

    NASA Astrophysics Data System (ADS)

    Pauluhn, Anuschka; Huber, Martin C. E.; Smith, Peter L.; Colina, Luis

    2015-12-01

    Radiometry, i.e. measuring the power of electromagnetic radiation—hitherto often referred to as "photometry"—is of fundamental importance in astronomy. We provide an overview of how to achieve a valid laboratory calibration of space telescopes and discuss ways to reliably extend this calibration to the spectroscopic telescope's performance in space. A lot of effort has been, and still is going into radiometric "calibration" of telescopes once they are in space; these methods use celestial primary and transfer standards and are based in part on stellar models. The history of the calibration of the Hubble Space Telescope serves as a platform to review these methods. However, we insist that a true calibration of spectroscopic space telescopes must directly be based on and traceable to laboratory standards, and thus be independent of the observations. This has recently become a well-supported aim, following the discovery of the acceleration of the cosmic expansion by use of type-Ia supernovae, and has led to plans for launching calibration rockets for the visible and infrared spectral range. This is timely, too, because an adequate exploitation of data from present space missions, such as Gaia, and from many current astronomical projects like Euclid and WFIRST demands higher radiometric accuracy than is generally available today. A survey of the calibration of instruments observing from the X-ray to the infrared spectral domains that include instrument- or mission-specific estimates of radiometric accuracies rounds off this review.

  1. Towers for Antarctic Telescopes

    NASA Astrophysics Data System (ADS)

    Hammerschlag, R. H.; Bettonvil, F. C. M.; Jägers, A. P. L.; Nielsen, G.

    To take advantage of the exceptional seeing above the boundary layer on Antarctic sites, a high-resolution telescope must be mounted on a support tower. An open transparent tower of framework minimizes the upward temperature-disturbed airflow. A typical minimum height is 30m. The tower platform has to be extremely stable against wind-induced rotational motions, which have to be less than fractions of an arc second, unusually small from a mechanical engineering viewpoint. In a traditional structure, structural deflections result in angular deflections of the telescope platform, which introduce tip and tilt motions in the telescope. However, a structure that is designed to deflect with parallel motion relative to the horizontal plane will undergo solely translation deflections in the telescope platform and thus will not degrade the image. The use of a parallel motion structure has been effectively demonstrated in the design of the 15-m tower for the Dutch Open Telescope (DOT) on La Palma. Special framework geometries are developed, which make it possible to construct high towers in stories having platforms with extreme stability against wind-induced tilt. These geometric solutions lead to constructions, being no more massive than a normal steel framework carrying the same load. Consequently, these lightweight towers are well suited to difficult sites as on Antarctica. A geometry with 4 stories has been worked out.

  2. The Travelling Telescope

    NASA Astrophysics Data System (ADS)

    Murabona Oduori, Susan

    2015-08-01

    The telescope has been around for more than 400 years, and through good use of it scientists have made many astonishing discoveries and begun to understand our place in the universe. Most people, however, have never looked through one. Yet it is a great tool for cool science and observation especially in a continent and country with beautifully dark skies. The Travelling Telescope project aims to invite people outside under the stars to learn about those curious lights in the sky.The Travelling Telescope aims to promote science learning to a wide range of Kenyan schools in various locations exchanging knowledge about the sky through direct observations of celestial bodies using state of the art telescopes. In addition to direct observing we also teach science using various hands-on activities and astronomy software, ideal for explaining concepts which are hard to understand, and for a better grasp of the sights visible through the telescope. We are dedicated to promoting science using astronomy especially in schools, targeting children from as young as 3 years to the youth, teachers, their parents and members of the public. Our presentation focuses on the OAD funded project in rural coastal Kenya.

  3. Robotic and Survey Telescopes

    NASA Astrophysics Data System (ADS)

    Woźniak, Przemysław

    Robotic telescopes are revolutionizing the way astronomers collect their dataand conduct sky surveys. This chapter begins with a discussion of principles thatguide the process of designing, constructing, and operating telescopes andobservatories that offer a varying degree of automation, from instruments remotelycontrolled by observers to fully autonomous systems requiring no humansupervision during their normal operations. Emphasis is placed on designtrade-offs involved in building end-to-end systems intended for a wide range ofscience applications. The second part of the chapter contains descriptions ofseveral projects and instruments, both existing and currently under development.It is an attempt to provide a representative selection of actual systems thatillustrates state of the art in technology, as well as important ideas and milestonesin the development of the field. The list of presented instruments spans the fullrange in size starting from small all-sky monitors, through midrange robotic andsurvey telescopes, and finishing with large robotic instruments and surveys.Explosive growth of telescope networking is enabling entirely new modesof interaction between the survey and follow-up observing. Increasingimportance of standardized communication protocols and software is stressed.These developments are driven by the fusion of robotic telescope hardware,massive storage and databases, real-time knowledge extraction, and datacross-correlation on a global scale. The chapter concludes with examplesof major science results enabled by these new technologies and futureprospects.

  4. The South Pole Telescope

    SciTech Connect

    Ruhl, J.E.; Ade, P.A.R.; Carlstrom, J.E.; Cho, H.M.; Crawford,T.; Dobbs, M.; Greer, C.H.; Halverson, N.W.; Holzapfel, W.L.; Lanting,T.M.; Lee, A.T.; Leitch, E.M.; Leong, J.; Lu, W.; Lueker, M.; Mehl, J.; Meyer, S.S.; Mohr, J.J.; Padin, S.; Plagge, T.; Pryke, C.; Runyan, M.C.; Schwan, D.; Sharp, M.K.; Spieler, H.; Staniszewski, Z.; Stark, A.A.

    2004-11-04

    A new 10 meter diameter telescope is being constructed for deployment at the NSF South Pole research station. The telescope is designed for conducting large-area millimeter and sub-millimeter wave surveys of faint, low contrast emission, as required to map primary and secondary anisotropies in the cosmic microwave background. To achieve the required sensitivity and resolution, the telescope design employs an off-axis primary with a 10 m diameter clear aperture. The full aperture and the associated optics will have a combined surface accuracy of better than 20 microns rms to allow precision operation in the submillimeter atmospheric windows. The telescope will be surrounded with a large reflecting ground screen to reduce sensitivity to thermal emission from the ground and local interference. The optics of the telescope will support a square degree field of view at 2mm wavelength and will feed a new 1000-element micro-lithographed planar bolometric array with superconducting transition-edge sensors and frequency-multiplexed readouts. The first key project will be to conduct a survey over 4000 degrees for galaxy clusters using the Sunyaev-Zeldovich Effect. This survey should find many thousands of clusters with a mass selection criteria that is remarkably uniform with redshift. Armed with redshifts obtained from optical and infrared follow-up observations, it is expected that the survey will enable significant constraints to be placed on the equation of state of the dark energy.

  5. Cooling Technology for Large Space Telescopes

    NASA Technical Reports Server (NTRS)

    DiPirro, Michael; Cleveland, Paul; Durand, Dale; Klavins, Andy; Muheim, Daniella; Paine, Christopher; Petach, Mike; Tenerelli, Domenick; Tolomeo, Jason; Walyus, Keith

    2007-01-01

    NASA's New Millennium Program funded an effort to develop a system cooling technology, which is applicable to all future infrared, sub-millimeter and millimeter cryogenic space telescopes. In particular, this technology is necessary for the proposed large space telescope Single Aperture Far-Infrared Telescope (SAFIR) mission. This technology will also enhance the performance and lower the risk and cost for other cryogenic missions. The new paradigm for cooling to low temperatures will involve passive cooling using lightweight deployable membranes that serve both as sunshields and V-groove radiators, in combination with active cooling using mechanical coolers operating down to 4 K. The Cooling Technology for Large Space Telescopes (LST) mission planned to develop and demonstrate a multi-layered sunshield, which is actively cooled by a multi-stage mechanical cryocooler, and further the models and analyses critical to scaling to future missions. The outer four layers of the sunshield cool passively by radiation, while the innermost layer is actively cooled to enable the sunshield to decrease the incident solar irradiance by a factor of more than one million. The cryocooler cools the inner layer of the sunshield to 20 K, and provides cooling to 6 K at a telescope mounting plate. The technology readiness level (TRL) of 7 will be achieved by the active cooling technology following the technology validation flight in Low Earth Orbit. In accordance with the New Millennium charter, tests and modeling are tightly integrated to advance the technology and the flight design for "ST-class" missions. Commercial off-the-shelf engineering analysis products are used to develop validated modeling capabilities to allow the techniques and results from LST to apply to a wide variety of future missions. The LST mission plans to "rewrite the book" on cryo-thermal testing and modeling techniques, and validate modeling techniques to scale to future space telescopes such as SAFIR.

  6. Double passing the Kitt Peak 1-m Fourier transform spectrometer

    NASA Technical Reports Server (NTRS)

    Jennings, D. E.; Hubbard, R.; Brault, J. W.

    1985-01-01

    Attention is given to a simple technique for performing the conversion of the Kitt Peak 1-m Fourier transform spectrometer's dual input/output optical configuration to a double pass configuration that improves spectral resolution by a factor of 2. The modification is made by placing a flat mirror in the output beam from each cat's eye, retroreflecting the beams back through the cat's eyes to the first beam splitter. A single detector is placed at the second input port, which then becomes the instrument's output.

  7. Note: A 1-m Foucault pendulum rolling on a ball

    NASA Astrophysics Data System (ADS)

    Salva, H. R.; Benavides, R. E.; Venturino, J. A.; Cuscueta, D. J.; Ghilarducci, A. A.

    2013-10-01

    We have built a short Foucault pendulum of 1-m length. The aim of this work was to increase the sensitivity to elliptical trajectories from other longer pendula. The design was a semi-rigid pendulum that rolls over a small ball. The measurements of the movements (azimuth and elliptical trajectory) were done by an optical method. The resulting pendulum works in a medium satisfactory way due to problems of the correct choice of the mass of the bob together with the diameter of the supporting ball. It is also important to keep the rolling surface very clean.

  8. Note: A 1-m Foucault pendulum rolling on a ball.

    PubMed

    Salva, H R; Benavides, R E; Venturino, J A; Cuscueta, D J; Ghilarducci, A A

    2013-10-01

    We have built a short Foucault pendulum of 1-m length. The aim of this work was to increase the sensitivity to elliptical trajectories from other longer pendula. The design was a semi-rigid pendulum that rolls over a small ball. The measurements of the movements (azimuth and elliptical trajectory) were done by an optical method. The resulting pendulum works in a medium satisfactory way due to problems of the correct choice of the mass of the bob together with the diameter of the supporting ball. It is also important to keep the rolling surface very clean.

  9. The Nuclear Compton Telescope

    NASA Astrophysics Data System (ADS)

    Boggs, Steven E.; NCT Collaboration

    2011-09-01

    The Nuclear Compton Telescope (NCT) is a balloon-borne soft gamma-ray (0.2-10 MeV) telescope designed to perform wide-field imaging, high-resolution spectroscopy, and novel polarization analysis of astrophysical sources. NCT employs a novel Compton telescope design, utilizing 12 high spectral resolution germanium detectors, with the ability to localize photon interaction in three dimensions. NCT underwent its first science flight from Fort Sumner, NM in Spring 2009, and was partially destroyed during a second launch attempt from Alice Spring, Australia in Spring 2010. We will present an overview of the NCT program, including results from the Spring 2009 flight, as well as status and plans for the NCT program.

  10. Configurable Aperture Space Telescope

    NASA Technical Reports Server (NTRS)

    Ennico, Kimberly; Vassigh, Kenny; Bendek, Selman; Young, Zion W; Lynch, Dana H.

    2015-01-01

    In December 2014, we were awarded Center Innovation Fund to evaluate an optical and mechanical concept for a novel implementation of a segmented telescope based on modular, interconnected small sats (satlets). The concept is called CAST, a Configurable Aperture Space Telescope. With a current TRL is 2 we will aim to reach TLR 3 in Sept 2015 by demonstrating a 2x2 mirror system to validate our optical model and error budget, provide strawman mechanical architecture and structural damping analyses, and derive future satlet-based observatory performance requirements. CAST provides an alternative access to visible andor UV wavelength space telescope with 1-meter or larger aperture for NASA SMD Astrophysics and Planetary Science community after the retirement of HST.

  11. Configurable Aperture Space Telescope

    NASA Technical Reports Server (NTRS)

    Ennico, Kimberly; Bendek, Eduardo

    2015-01-01

    In December 2014, we were awarded Center Innovation Fund to evaluate an optical and mechanical concept for a novel implementation of a segmented telescope based on modular, interconnected small sats (satlets). The concept is called CAST, a Configurable Aperture Space Telescope. With a current TRL is 2 we will aim to reach TLR 3 in Sept 2015 by demonstrating a 2x2 mirror system to validate our optical model and error budget, provide straw man mechanical architecture and structural damping analyses, and derive future satlet-based observatory performance requirements. CAST provides an alternative access to visible and/or UV wavelength space telescope with 1-meter or larger aperture for NASA SMD Astrophysics and Planetary Science community after the retirement of HST

  12. LSST telescope modeling overview

    NASA Astrophysics Data System (ADS)

    Sebag, J.; Andrew, J.; Angeli, G.; Araujo, C.; Barr, J.; Callahan, S.; Cho, M.; Claver, C.; Daruich, F.; Gressler, W.; Hileman, E.; Liang, M.; Muller, G.; Neill, D.; Schoening, W.; Warner, M.; Wiecha, O.; Xin, B.; Orden Martinez, Alfredo; Perezagua Aguado, Manuel; García Marchena, Luis; Ruiz de Argandoña, Ismael

    2016-08-01

    During this early stage of construction of the Large Synoptic Survey Telescope (LSST), modeling has become a crucial system engineering process to ensure that the final detailed design of all the sub-systems that compose the telescope meet requirements and interfaces. Modeling includes multiple tools and types of analyses that are performed to address specific technical issues. Three-dimensional (3D) Computeraided Design (CAD) modeling has become central for controlling interfaces between subsystems and identifying potential interferences. The LSST Telescope dynamic requirements are challenging because of the nature of the LSST survey which requires a high cadence of rapid slews and short settling times. The combination of finite element methods (FEM), coupled with control system dynamic analysis, provides a method to validate these specifications. An overview of these modeling activities is reported in this paper including specific cases that illustrate its impact.

  13. Ultrathin zoom telescopic objective.

    PubMed

    Li, Lei; Wang, Di; Liu, Chao; Wang, Qiong-Hua

    2016-08-08

    We report an ultrathin zoom telescopic objective that can achieve continuous zoom change and has reduced compact volume. The objective consists of an annular folded lens and three electrowetting liquid lenses. The annular folded lens undertakes the main part of the focal power of the lens system. Due to a multiple-fold design, the optical path is folded in a lens with the thickness of ~1.98mm. The electrowetting liquid lenses constitute a zoom part. Based on the proposed objective, an ultrathin zoom telescopic camera is demonstrated. We analyze the properties of the proposed objective. The aperture of the proposed objective is ~15mm. The total length of the system is ~18mm with a tunable focal length ~48mm to ~65mm. Compared with the conventional zoom telescopic objective, the total length has been largely reduced.

  14. The Discovery Channel Telescope

    NASA Astrophysics Data System (ADS)

    Millis, R. L.; Dunham, E. W.; Sebring, T. A.; Smith, B. W.; de Kock, M.; Wiecha, O.

    2004-11-01

    The Discovery Channel Telescope (DCT) is a 4.2-m telescope to be built at a new site near Happy Jack, Arizona. The DCT features a large prime focus mosaic CCD camera with a 2-degree-diameter field of view especially designed for surveys of KBOs, Centaurs, NEAs and other moving or time-variable targets. The telescope can be switched quickly to a Ritchey-Chretien configuration for optical/IR spectroscopy or near-IR imaging. This flexibility allows timely follow-up physical studies of high priority objects discovered in survey mode. The ULE (ultra-low-expansion) meniscus primary and secondary mirror blanks for the telescope are currently in fabrication by Corning Glass. Goodrich Aerospace, Vertex RSI, M3 Engineering and Technology Corp., and e2v Technologies have recently completed in-depth conceptual design studies of the optics, mount, enclosure, and mosaic focal plane, respectively. The results of these studies were subjected to a formal design review in July, 2004. Site testing at the 7760-ft altitude Happy Jack site began in 2001. Differential image motion observations from 117 nights since January 1, 2003 gave median seeing of 0.84 arcsec FWHM, and the average of the first quartile was 0.62 arcsec. The National Environmental Policy Act (NEPA) process for securing long-term access to this site on the Coconino National Forest is nearing completion and ground breaking is expected in the spring of 2005. The Discovery Channel Telescope is a project of the Lowell Observatory with major financial support from Discovery Communications, Inc. (DCI). DCI plans ongoing television programming featuring the construction of the telescope and the research ultimately undertaken with the DCT. An additional partner can be accommodated in the project. Interested parties should contact the lead author.

  15. The ANTARES neutrino telescope

    NASA Astrophysics Data System (ADS)

    Distefano, Carla

    The ANTARES collaboration has completed in 2008 the construction of an underwater high-energy neutrino telescope in the Mediterranean Sea, located 40 km off the French coast at a depth of 2500 m. The detector consists of 885 optical modules, which are distributed in 12 detector lines, various calibration systems and devices for environmental measurements. With an instrumented volume of about 0.05 km3, ANTARES is the largest Cherenkov neutrino detector currently operating in the Northern hemisphere. A general overview on the ANTARES telescope is given. The preliminary results from the various physics analyses on the collected data will be presented.

  16. Large fully retractable telescope enclosures still closable in strong wind

    NASA Astrophysics Data System (ADS)

    Bettonvil, Felix C. M.; Hammerschlag, Robert H.; Jägers, Aswin P. L.; Sliepen, Guus

    2008-07-01

    Two prototypes of fully retractable enclosures with diameters of 7 and 9 m have been built for the high-resolution solar telescopes DOT (Dutch Open Telescope) and GREGOR, both located at the Canary Islands. These enclosures protect the instruments for bad weather and are fully open when the telescopes are in operation. The telescopes and enclosures also operate in hard wind. The prototypes are based on tensioned membrane between movable but stiff bows, which fold together to a ring when opened. The height of the ring is small. The prototypes already survived several storms, with often snow and ice, without any damage, including hurricane Delta with wind speeds up to 68 m/s. The enclosures can still be closed and opened with wind speeds of 20 m/s without any problems or restrictions. The DOT successfully demonstrated the open, wind-flushing concept for astronomical telescopes. It is now widely recognized that also large future telescopes benefit from wind-flushing and retractable enclosures. These telescopes require enclosures with diameters of 30 m until roughly 100 m, the largest sizes for the ELTs (Extreme Large Telescopes), which will be built in the near future. We discuss developments and required technology for the realization of these large sizes.

  17. Spectral slicing X-ray telescope

    NASA Technical Reports Server (NTRS)

    Hoover, R. B.; Shealy, D.; Chao, S.-H.

    1986-01-01

    Layered synthetic microstructure (LSM) X-ray optics is investigated as a system for coupling a conventional glancing incidence X-ray mirror to a high sensitivity X-ray detector. It is shown that, by the use of figured LSM optics, it is possible to magnify the X-ray image produced by the primary mirrors so as to maintain their high inherent spatial resolution. The results of theoretical and design analyses of several spectral slicing X-ray telescope systems that utilize LSM mirrors of hyperboloidal, spherical, ellipsoidal, and constant optical path aspheric configurations are presented. It is shown that the spherical LSM optics are the preferred configuration, yielding subarcsecond performance over the entire field. The Stanford/Marshall Space Flight Center Rocket X-ray Telescope, which will utilize normal incidence LSM optics to couple a Wolter-Schwarzschild primary mirror to high resolution detectors for solar X-ray/EUV studies, is discussed. Design diagrams are included.

  18. Solar flares: an overview.

    PubMed

    Rust, D M

    1992-01-01

    This is a survey of solar phenomena and physical models that may be useful for improving forecasts of solar flares and proton storms in interplanetary space. Knowledge of the physical processes that accelerate protons has advanced because of gamma-ray and X-ray observations from the Solar Maximum Mission telescopes. Protons are accelerated at the onset of flares, but the duration of any subsequent proton storm at 1 AU depends on the structure of the interplanetary fields. X-ray images of the solar corona show possible fast proton escape paths. Magnetographs and high-resolution visible-band images show the magnetic field structure near the acceleration region and the heating effects of sunward-directed protons. Preflare magnetic field growth and shear may be the most important clues to the physical processes that generate high energy solar particles. Any dramatic improvement in flare forecasts will require high resolution solar telescopes in space. Several possibilities for improvements in the art of flare forecasting are presented, among them: the use of acoustic tomography to probe for subsurface magnetic fields; a satellite-borne solar magnetograph; and an X-ray telescope to monitor the corona for eruptions.

  19. A Simple "Tubeless" Telescope

    ERIC Educational Resources Information Center

    Straulino, S.; Bonechi, L.

    2010-01-01

    Two lenses make it possible to create a simple telescope with quite large magnification. The set-up is very simple and can be reproduced in schools, provided the laboratory has a range of lenses with different focal lengths. In this article, the authors adopt the Keplerian configuration, which is composed of two converging lenses. This instrument,…

  20. The Falcon Telescope Network

    NASA Astrophysics Data System (ADS)

    Chun, F.; Tippets, R.; Dearborn, M.; Gresham, K.; Freckleton, R.; Douglas, M.

    2014-09-01

    The Falcon Telescope Network (FTN) is a global network of small aperture telescopes developed by the Center for Space Situational Awareness Research in the Department of Physics at the United States Air Force Academy (USAFA). Consisting of commercially available equipment, the FTN is a collaborative effort between USAFA and other educational institutions ranging from two- and four-year colleges to major research universities. USAFA provides the equipment (e.g. telescope, mount, camera, filter wheel, dome, weather station, computers and storage devices) while the educational partners provide the building and infrastructure to support an observatory. The user base includes USAFA along with K-12 and higher education faculty and students. Since the FTN has a general use purpose, objects of interest include satellites, astronomical research, and STEM support images. The raw imagery, all in the public domain, will be accessible to FTN partners and will be archived at USAFA in the Cadet Space Operations Center. FTN users will be able to submit observational requests via a web interface. The requests will then be prioritized based on the type of user, the object of interest, and a user-defined priority. A network wide schedule will be developed every 24 hours and each FTN site will autonomously execute its portion of the schedule. After an observational request is completed, the FTN user will receive notification of collection and a link to the data. The Falcon Telescope Network is an ambitious endeavor, but demonstrates the cooperation that can be achieved by multiple educational institutions.

  1. Exploring Galileo's Telescope

    ERIC Educational Resources Information Center

    Straulino, Samuele; Terzuoli, Alessandra

    2010-01-01

    In the first months of 2009, the International Year of Astronomy, the authors developed an educational project for middle-level students connected with the first astronomical discoveries that Galileo Galilei (1564-1642) made 400 years ago. The project included the construction of a basic telescope and the observation of the Moon. The project, if…

  2. The Liverpool Telescope

    NASA Astrophysics Data System (ADS)

    Smith, Robert J.; Bates, S. D.; Clay, Neil R.; Fraser, Stephen N.; Marchant, J. M.; Mottram, C. J.; Steele, I. A.; Tomlinson, M. D.

    2011-03-01

    The Liverpool Telescope (LT) is a fully robotic 2m optical telescope at a world-class observatory site. It runs autonomously without direct human control either on site or remotely. It is not operated primarily for a single science project, but rather is a common-user facility, time allocated by an open, peer-review process and conducting a variety of optical and IR imaging, spectroscopic and polarimetric programs. This paper describes some of aspects of the site infrastructure and instrument suite designed specifically to support robust and reliable unsupervised operations. Aside from the telescope hardware, the other aspect of robotic operations is the mechanisms whereby users interact with the telescope and its automated scheduler. We describe how these have been implemented for the LT. Observing routinely since 2004, the LT has demonstrated it is possible to operate a large, common-user robotic observatory. Making the most of the flexibility afforded by fully robotic operations, development continues in collaboration with both observers and other observatories to develop observing modes to enable new science across the broad discipline of time-domain astrophysics.

  3. Wearable telescopic contact lens.

    PubMed

    Arianpour, Ashkan; Schuster, Glenn M; Tremblay, Eric J; Stamenov, Igor; Groisman, Alex; Legerton, Jerry; Meyers, William; Amigo, Goretty Alonso; Ford, Joseph E

    2015-08-20

    We describe the design, fabrication, and testing of a 1.6 mm thick scleral contact lens providing both 1× and 2.8× magnified vision paths, intended for use as a switchable eye-borne telescopic low-vision aid. The F/9.7 telescopic vision path uses an 8.2 mm diameter annular entrance pupil and 4 internal reflections in a polymethyl methacrylate precision optic. This gas-impermeable insert is contained inside a smooth outer casing of rigid gas-permeable polymer, which also provides achromatic correction for refraction at the curved lens face. The unmagnified F/4.1 vision path is through the central aperture of the lens, with additional transmission between the annular telescope rings to enable peripheral vision. We discuss potential solutions for providing oxygenation for an extended wear version of the lens. The prototype lenses were characterized using a scale-model human eye, and telescope functionality was confirmed in a small-scale clinical (nondispensed) demonstration.

  4. Membrane photon sieve telescopes.

    PubMed

    Andersen, Geoff

    2010-11-20

    We present results of research into the design and construction of membrane photon sieves as primaries for next-generation lightweight space telescopes. We have created prototypes in electroformed nickel as well as diazo and CP-1 polymer films. In two such cases, diffraction-limited imaging performance was demonstrated over a narrow bandwidth.

  5. Chromospheric telescope of Baikal Astrophysical Observatory. New light

    NASA Astrophysics Data System (ADS)

    Skomorovsky, Valeriy; Kushtal, Galina; Lopteva, Lyubov; Proshin, Vladimir; Trifonov, Viktor; Chuprakov, Sergey; Khimich, Valeriy

    2016-06-01

    A chromospheric telescope is an important instrument for synoptic observations and solar research. After several decades of observations with the chromospheric telescope at Baikal Astrophysical Observatory, a need arose to improve the characteristics of this telescope and filter. A new reimaging lens to produce full-disk solar images 18 mm in diameter at the CCD camera Hamamatsu C-124 with a detector 36×24 mm (4000×2672 pixels) was designed and manufactured to replace the out-of-operation 50×50 mm Princeton Instruments camera. A contrast interference blocking filter and a new Iceland spar and quartz crystal plates instead of damaged ones were made and installed in the Hα birefringent filter (BF), manufactured by Bernhard Halle Nachfl. The optical immersion in the filter was changed. All telescope optics was cleaned and adjusted. We describe for the first time the design features and their related BF passband tuning. The wavefront interferograms of optical elements and telescope as a whole show that the wavefront distortion of the optical path is within 0.25 λ. The BF and pre-filter spectral parameters provide high-contrast monochromatic images. Besides, we give examples of solar chromospheric images in the Hα line core and wing.

  6. Multiple-Cone Sunshade for a Spaceborne Telescope

    NASA Technical Reports Server (NTRS)

    Cafferty, Terry; Ford, Virginia

    2008-01-01

    A document describes a sunshade assembly for the spaceborne telescope of the Terrestrial Planet Finder Coronagraph mission. During operation, the telescope is aimed at target stars in the semihemisphere away from the Earth's Sun. The observatory rotates about its pointing axis during a single star observation, resulting in relative movement of the Sun. The sunshade assembly protects the telescope against excessive solar-induced thermal distortions for times long enough to complete observations. The assembly includes a cylindrical baffle immediately surrounding the telescope, and a series of coaxial conical shields at half-cone angle increments of between 3 and 6. The black inner surface of the cylindrical baffle suppresses stray light. The outer surface of the cylindrical baffle and all the surfaces of the conical shields except the outermost one are specular and highly reflective in the infrared. The outer surface of the outer shield is a material with low solar absorptance and high infrared emittance, such as silverized Teflon or white paint. This arrangement strongly radiatively couples each shield layer more effectively to cold space than to adjacent shield layers. The result is that the solar-driven temperature gradients in the cylindrical baffle are nearly negated, and only weakly communicated to the highly-infrared-reflective face of the primary telescope mirror.

  7. The Importance of UV/Visible Space-Based Telescopic Observations for Planetary Science

    NASA Astrophysics Data System (ADS)

    Clarke, J. T.

    2017-02-01

    First rate science has repeatedly resulted from HST observations of solar system objects. This overview of the science goals and outcomes of some of these programs will illustrate the importance of combined telescopic and in situ measurements.

  8. Translation initiation of the HIV-1 mRNA

    PubMed Central

    Ohlmann, Théophile; Mengardi, Chloé; López-Lastra, Marcelo

    2014-01-01

    Translation initiation of the full-length mRNA of the human immunodeficiency virus can occur via several different mechanisms to maintain production of viral structural proteins throughout the replication cycle. HIV-1 viral protein synthesis can occur by the use of both a cap-dependant and IRES-driven mechanism depending on the physiological conditions of the cell and the status of the ongoing infection. For both of these mechanisms there is a need for several viral and cellular co-factors for optimal translation of the viral mRNA. In this review we will describe the mechanism used by the full-length mRNA to initiate translation highlighting the role of co-factors within this process. A particular emphasis will be given to the role of the DDX3 RNA helicase in HIV-1 mRNA translation initiation. PMID:26779410

  9. Translation initiation of the HIV-1 mRNA.

    PubMed

    Ohlmann, Théophile; Mengardi, Chloé; López-Lastra, Marcelo

    2014-09-01

    Translation initiation of the full-length mRNA of the human immunodeficiency virus can occur via several different mechanisms to maintain production of viral structural proteins throughout the replication cycle. HIV-1 viral protein synthesis can occur by the use of both a cap-dependant and IRES-driven mechanism depending on the physiological conditions of the cell and the status of the ongoing infection. For both of these mechanisms there is a need for several viral and cellular co-factors for optimal translation of the viral mRNA. In this review we will describe the mechanism used by the full-length mRNA to initiate translation highlighting the role of co-factors within this process. A particular emphasis will be given to the role of the DDX3 RNA helicase in HIV-1 mRNA translation initiation.

  10. Giant Magellan Telescope: overview

    NASA Astrophysics Data System (ADS)

    Johns, Matt; McCarthy, Patrick; Raybould, Keith; Bouchez, Antonin; Farahani, Arash; Filgueira, Jose; Jacoby, George; Shectman, Steve; Sheehan, Michael

    2012-09-01

    The Giant Magellan Telescope (GMT) is a 25-meter optical/infrared extremely large telescope that is being built by an international consortium of universities and research institutions. It will be located at the Las Campanas Observatory, Chile. The GMT primary mirror consists of seven 8.4-m borosilicate honeycomb mirror segments made at the Steward Observatory Mirror Lab (SOML). Six identical off-axis segments and one on-axis segment are arranged on a single nearly-paraboloidal parent surface having an overall focal ratio of f/0.7. The fabrication, testing and verification procedures required to produce the closely-matched off-axis mirror segments were developed during the production of the first mirror. Production of the second and third off-axis segments is underway. GMT incorporates a seven-segment Gregorian adaptive secondary to implement three modes of adaptive-optics operation: natural-guide star AO, laser-tomography AO, and ground-layer AO. A wide-field corrector/ADC is available for use in seeing-limited mode over a 20-arcmin diameter field of view. Up to seven instruments can be mounted simultaneously on the telescope in a large Gregorian Instrument Rotator. Conceptual design studies were completed for six AO and seeing-limited instruments, plus a multi-object fiber feed, and a roadmap for phased deployment of the GMT instrument suite is being developed. The partner institutions have made firm commitments for approximately 45% of the funds required to build the telescope. Project Office efforts are currently focused on advancing the telescope and enclosure design in preparation for subsystem- and system-level preliminary design reviews which are scheduled to be completed in the first half of 2013.

  11. Numerical simulation of ground-based telescope enclosures

    NASA Astrophysics Data System (ADS)

    Pan, Nian; Ma, Wenli; Huang, Jinlong

    2014-11-01

    In order to choose enclosure for the next generation telescopes, numerical simulation method was used. Firstly, the telescope, two general kinds of enclosures structure and the external flow field model were established, Then CFD(Computational Fluid Dynamics) technology was used to analyze the wind speed, static pressure, turbulence kinetic energy distribution and eddy around the telescope, when the telescope at two different pointing gestures and the external wind speed at 10m/s. The simulation results showed that when the telescope adapt the retractable enclosure, the wind speed of the main optical path between 6.1 m/s and 9.3 m/s, and the average static pressure (gauge pressure) on the primary mirror between 42.9268 Pa and 37.5579 Pa, however when telescope adapt the hemispherical enclosure, the wind speed of the main optical path between 3.4 m/s and 6.8 m/s, the average static pressure (gauge pressure) on the primary mirror between 12.1387 Pa and 11.105 Pa. Although the wind resistance of the retractable enclosure was lower than the hemispherical enclosure, no eddy generated near the main optical path, it provided the telescope a uniform flow field and ensured the quality of the image of a star. So the retractable enclosure would have better performance than the hemispherical enclosure.

  12. Reaching 1 m deep on Mars: the Icebreaker drill.

    PubMed

    Zacny, K; Paulsen, G; McKay, C P; Glass, B; Davé, A; Davila, A F; Marinova, M; Mellerowicz, B; Heldmann, J; Stoker, C; Cabrol, N; Hedlund, M; Craft, J

    2013-12-01

    The future exploration of Mars will require access to the subsurface, along with acquisition of samples for scientific analysis and ground-truthing of water ice and mineral reserves for in situ resource utilization. The Icebreaker drill is an integral part of the Icebreaker mission concept to search for life in ice-rich regions on Mars. Since the mission targets Mars Special Regions as defined by the Committee on Space Research (COSPAR), the drill has to meet the appropriate cleanliness standards as requested by NASA's Planetary Protection Office. In addition, the Icebreaker mission carries life-detection instruments; and in turn, the drill and sample delivery system have to meet stringent contamination requirements to prevent false positives. This paper reports on the development and testing of the Icebreaker drill, a 1 m class rotary-percussive drill and triple redundant sample delivery system. The drill acquires subsurface samples in short, approximately 10 cm bites, which makes the sampling system robust and prevents thawing and phase changes in the target materials. Autonomous drilling, sample acquisition, and sample transfer have been successfully demonstrated in Mars analog environments in the Arctic and the Antarctic Dry Valleys, as well as in a Mars environmental chamber. In all environments, the drill has been shown to perform at the "1-1-100-100" level; that is, it drilled to 1 m depth in approximately 1 hour with less than 100 N weight on bit and approximately 100 W of power. The drilled substrate varied and included pure ice, ice-rich regolith with and without rocks and with and without 2% perchlorate, and whole rocks. The drill is currently at a Technology Readiness Level (TRL) of 5. The next-generation Icebreaker drill weighs 10 kg, which is representative of the flightlike model at TRL 5/6.

  13. Overview of the HL-1M Tokamak Experiments

    SciTech Connect

    Liu Yong; Wang Enyao; Ding Xuantong; Yan Longwen; Qian Shangjie; Yan Jiancheng

    2002-07-15

    Experimental progress with the HL-1M tokamak has been made in many areas including confinement improvement, auxiliary heating, plasma fueling, and wall conditionings. An H-mode induced by a biased electrode was obtained with the formation of an internal transport barrier at the region of r/a {approx} 0.4 to 0.5. Confinement improvement by lower-hybrid current drive (LHCD) was extensively investigated. Confinement improvement seems to be related to the production of the radial electron field during LHCD. In off-axis electron cyclotron resonance heating (ECRH), double sawteeth in soft X-ray radiation were observed, which implies that reversed magnetic shear could be formed during ECRH. At higher ECRH power, when the resonance position is near the q = 1 surface, fishbone instability was observed and investigated. An eight-shot pellet injector was used for the experiments. The pellet ablation process was investigated with a charge-coupled device (CCD) camera and an H{sub {alpha}} emission detector array. Clearly, asymmetry in the pellet cloud was observed in both the toroidal and poloidal directions. It has been found that the pellet velocity slows down clearly after the pellet enters the plasma. The density limit has been investigated on HL-1M at different wall conditionings with three kinds of fueling methods. It was found that a higher density limit could be achieved under the following conditions: (a) a strong reduction of the impurity content after siliconization and (b) a peaked density profile with pellet injection and/or supersonic molecular beam injection. With a neutral beam injection (NBI) system of 1 MW, preliminary results of NBI experiments were obtained with an increase of ion temperature from 450 to 700 eV.

  14. The SOAR Telescope Project Southern Observatory for Astronomical Research (SOAR)

    DTIC Science & Technology

    2003-03-21

    completed SOAR dome and facility. 2. Dome The preliminary design of the dome was handled by M3 (US). A Brazilian firm, Equatorial Sistemas led the...for the Gemini Telescope during construction, now Project Manager at the National Solar Observatory • Robert Shelton, Provost of the University on

  15. Coordinated observations using the world largest low-frequency radio telescopes and space misiions

    NASA Astrophysics Data System (ADS)

    Konovalenko, A. A.; Zarka, Ph.; Kolyadin, V. L.; Zakharenko, V. V.; Stepkin, S. V.; Panchenko, M.; Lecacheux, A.; Rucker, H. O.; Fischer, G.; Ulyanov, O. M.; Melnik, V. N.; Litvinenko, G. V.; Sidorchuk, M. A.; Bubnov, I. N.; Vasilyeva, Ya. Yu.; Bojko, A. I.; Shaposhnikov, V.; Mann, G.; Kalinichenko, N. N.; Falkovich, I. S.; Koval, A. A.; Mylostna, K.; Pylaev, O. S.; Shepelev, V. A.; Reznik, A. P.

    2013-09-01

    The positive possibilities of astrophysical objects studies(including the Solar system investigations) using coordinated observations with the largest existing and coming low frequency radio telescopes are shown. The observations of the Sun, Jupiter, Saturn, ant others with UTR-2, URAN, NDA radio telescopes, and WIND, Cassini and STEREO space missions at frequencies lower than 40 MHz have been carried out.

  16. Telescope Control and Data Analysis Softwares for the SOFT

    NASA Astrophysics Data System (ADS)

    Moon, Young-Jae; Yoon, So-Yoon; Park, Young Deuk; Jang, Be-Ho

    1997-12-01

    In this paper we present a newly improved telescope control software and a newly developed data analysis software package for effective use of the Solar Flare Telescope(SOFT). The telescope control software permits us to make not only auto tracking of the SOFT, but also quantitative measurement of the solar irradiation, allowing us to provide weather monitorings. In addition we introduce an IDL widget software package for both monochromatic (MONO version) and polarimetric data (VMG version) analysis. The MONO version is capable od loading FITS files, changing colors and contrast, image processing, displaying plots, and saving displayed plots by selected formats. The VMG version, on the other hand provides a calibration of polarimetric data and plots of reduced vector magnetic fields.

  17. Skylab Apollo Telescope Mount Spar and Sun End

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The Apollo Telescope Mount (ATM) was designed and developed by the Marshall Space Flight Center and served as the primary scientific instrument unit aboard Skylab (1973-1979). The ATM contained eight complex astronomical instruments designed to observe the Sun over a wide spectrum from visible light to x-rays. This image depicts the sun end and spar of the ATM flight unit showing individual telescopes. All solar telescopes, the fine Sun sensors, and some auxiliary systems are mounted on the spar, a cruciform lightweight perforated metal mounting panel that divides the canister lengthwise into four equal compartments. The spar assembly was nested inside a cylindrical canister that fit into a complex frame named the rack, and was protected by the solar shield.

  18. Wavefront Analysis of Adaptive Telescope

    NASA Technical Reports Server (NTRS)

    Hadaway, James B.; Hillman, Lloyd

    1997-01-01

    The motivation for this work came from a NASA Headquarters interest in investigating design concepts for a large space telescope employing active optics technology. The development of telescope optical requirements and potential optical design configurations is reported.

  19. Development of solar tower observatories

    NASA Astrophysics Data System (ADS)

    Wolfschmidt, Gudrun

    Because the horizontal solar telescope, the Snow Telescope in Yerkes Observatory, was affected by air-currents from the warmed-up soil, George Ellery Hale had the idea of a tower telescope. In 1904, the 60-foot tower in Mt. Wilson was ready, in 1908 the 150-foot tower was built with the help of the Carnegie foundation. After World War I, Germany made heavy efforts to regain its former strong position in the field of science. Already in December 1919 - after the spectacular result of the English eclipse expedition in October 1919 - Erwin Finlay-Freundlich started a successful fund raising (“Einstein-Stiftungrdquo;) among German industrialists. The company Zeiss in Jena was responsible for the instrumentation of the 20-m solar tower, built in 1920-22. The optical design of the Einstein Tower in respect to light intensity surpassed even the Mt. Wilson solar observatory. Also abroad solar tower observatories were built in the 1920s: Utrecht,The Netherlands (1922), Canberra, Australia (1924), Arcetri, Italy (1926), Pasadena, California (1926) and Tokyo, Japan (1928). In the thirties, solar physics became important because of the solar maximum in 1938 and the new observational possibilities created by Bernard Lyot. At the end of the 1930s, Karl-Otto Kiepenheuer proposed to establish a solar tower observatory on Wendelstein in order to improve the predictions of radio interference by observing sunspots. By stressing the importance of the solar research for war efforts, Otto Heckmann of Göttingen observatory finally succeeded in winning the “Reichsluftfahrtministerium” to finance several solar observatories, like Wendelstein, Hainberg/Göttingen, Kanzelhöhe/Villach, and Schauinsland/Freiburg. Solar astronomy profited by the foundation of the new observatories - four of them existed still after the war. Abroad only the solar observatories of Oxford (1935) and the 50 foot tower of the McMath-Hulbert Observatory, University of Michigan (1936) should be mentioned. Only

  20. Uzaybimer Radio Telescope Control System

    NASA Astrophysics Data System (ADS)

    Balbay, R.; Öz, G. K.; Arslan, Ö.; Özeren, F. F.; Küçük, İ.

    2016-12-01

    A 13 meters former NATO radar is being converted into a radio telescope. The radio telescope is controlled by a system which has been developed at UZAYBİMER. The Telescope Control System(TCS) has been designed using modern industrial systems. TCS has been developed in LabView platform in which works Windows embedded OS. The position feedback used on radio telescopes is an industrial EtherCAT standard. ASCOM library is used for astronomical calculations.

  1. The Primeval Structure Telescope

    NASA Astrophysics Data System (ADS)

    Peterson, J. B.; Pen, U. L.; Wu, X. P.

    2004-12-01

    The Primeval Structure Telescope (PaST) will be used to study early ionization of the universe. The telescope will image and spectrally resolve hyperfine emission of neutral hydrogen at redshifts from about 6 to 20. Recently released data, obtained with the WMAP satellite, indicate that the universe was ionized very early, at around redshift 15. Right now, there is very little information on this ionization, since the WMAP data do not tell us the ionization history or the energy source. If the energy source was emission from collapsed objects, perhaps ultraviolet radiation from the first stars, the ionization did not occur homogenously. Earlier star formation in high-density regions causes these to be ionized first. Just when the ionization was half complete, the large-scale structure of the universe became visible in the ionization pattern. We will use redshifted 21 cm brightness to image the largest of the ionized bubbles in three dimensions, allowing us to determine the redshift of the early ionization. In addition, we will be able to study the evolution and merging of the ionized bubbles. PAST will be a sparse array telescope consisting of 10,000 log periodic antennas, providing over 50,000 square meters of effective collecting area. These antennas will be grouped into 80 phased arrays of 127 antennas. Current plans have these phased arrays fixed, pointed at the North Celestial Pole. Later, we can add electronic beam steering. Signals from the 80 phased arrays will be processed using a correlator built from a network of about 100 PC computers. The telescope will occupy ten square kilometers in the Ulastai Valley, Xin Jiang, China. The telescope will be built almost entirely of inexpensive commercially available off-the-shelf components. A series of tests of prototypes, made on-site, have allowed us to study the performance of the telescope and its components. We will present these results and show sky images obtained with the prototypes. We anticipate that one

  2. DKIST telescope mount factory testing overview and lessons learned

    NASA Astrophysics Data System (ADS)

    Jeffers, Paul; Trieloff, Todd; Kärcher, Hans; Seubert, Steffen; McBride, William

    2016-07-01

    The Daniel K Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, and will be able to provide the sharpest views ever taken of the solar surface. The telescope has a 4m aperture primary mirror, however due to the off axis nature of the optical layout, the telescope Mount has proportions similar to an 8 metre class telescope. The Telescope Mount Assembly (TMA) includes both the telescope Mount and the 16m diameter laboratory table or Coudé Rotator. The Coudé Rotator supports the full instrument suite of up to 40 tonnes and has full rotation capabilities similar to the Mount azimuth axis. The TMA has been going through the design, fabrication and assembly process since 2009 with Ingersoll Machine Tool's and this culminated with the Factory Acceptance Testing (FAT). The preparation for the FAT started not long after the Final Design Review was complete and planning continued through the assembly stages. The official Factory Acceptance testing of the Coudé Rotator was conducted during May/Jun 2014 and the Mount in Feb through Apr 2015. This paper provides an overview and discussion of the testing that was carried out. The depth and extent of testing will be described with discussion on what we would do differently next time. Also details of the preparation / process that lead into the testing will be presented. Most importantly the results will be summarized and lessons learned during the testing provided as well as discussion on how this influences the planned site assembly and extent of re-test post assembly.

  3. Las Cumbres Observatory 1-Meter Global Science Telescope Network

    NASA Astrophysics Data System (ADS)

    Pickles, Andrew; Dubberley, M.; Haldeman, B.; Haynes, R.; Posner, V.; Rosing, W.; staff, LCOGT

    2009-05-01

    We present the optical, mechanical and electronic design of the LCOGT 1-m telescope. These telescopes are planned to go in pairs to each of 6 sites worldwide, complementing 0.4m telescopes and 2-m telescopes at two existing sites. This science network is designed to provide continuously available photometric monitoring and spectroscopy of variable sources. The 1-m optical design is an f/8 quasi-RC system, with a doublet corrector and field flattener to provide good image quality out to 0.8 degrees. The field of view of the Fairchild 4K science CCD is 27 arcmin, with 0.39 arcsec pixels. The mechanical design includes a stiff C-ring equatorial mount and friction drive rollers, mounted on a triangular base that can be adjusted for latitude. Another friction drive is coupled at the Declination axis to the M1 mirror cell, that forms the main Optical Tube Assembly (OTA) structural element. The OTA design includes a stiff carbon fiber truss assembly, with offset vanes to an M2 drive that provides remote focus, tilt and collimation. The tube assembly weighs about 600 Kg, including Hextek mirrors, 4K science CCD, filter wheel, autoguiders and medium resolution spectrograph pick-off fiber. The telescopes will be housed in domes at existing observatory sites. They are designed to operate remotely and reliably under centralized control for automatic, optimized scheduling of observations with available hardware.

  4. Soft X-ray images of the solar corona using normal incidence optics

    NASA Technical Reports Server (NTRS)

    Bruner, M. E.; Haisch, B. M.; Brown, W. A.; Acton, L. W.; Underwood, J. H.

    1988-01-01

    A solar coronal loop system has been photographed in soft X-rays using a normal incidence telescope based on multilayer mirror technology. The telescope consisted of a spherical objective mirror of 4 cm aperture and 1 m focal length, a film cassette, and a focal plane shutter. A metallized thin plastic film filter was used to exclude visible light. The objective mirror was covered with a multilayer coating consisting of alternating layers of tungsten and carbon whose combined thicknesses satisfied the Bragg diffraction condition for 44 A radiation. The image was recorded during a rocket flight on October 25, 1985 and was dominated by emission lines arising from the Si XII spectrum. The rocket also carried a high resolution soft X-ray spectrograph that confirmed the presence of Si XII line radiation in the source. This image represents the first successful use of multilayer technology for astrophysical observations.

  5. High resolution imaging with multilayer telescopes: resolution performance of the MSSTA II telescopes

    SciTech Connect

    Martinez-Galarce, Dennis S.; Walker, Arthur B. C. II; Gore, David B.; Kankelborg, Charles C.; Hoover, Richard B.; Barbee, T. W. Jr.; Boerner, P. F. X.

    2000-04-01

    The Multi-Spectral Solar Telescope Array (MSSTA) is a sounding rocket-borne observatory composed of a set of normal-incidence multilayer-coated telescopes that obtained selected bandpass spectroheliograms (44 to 1550 Aa) of the solar atmosphere. These spectroheliograms were recorded on specially fabricated XUV and FUV 70-mm Kodak film. Rocket launches of this instrument payload took place in 1991 (MSSTA I) and 1994 (MSSTA II) at the White Sands Missile Test Range in New Mexico, sponsored by the National Aeronautics and Space Administration (NASA) sounding rocket experiment program. Immediately prior to the 1994 launch, visible light focusing tests of each telescope were performed in situ using a 1951 standard Air Force high-resolution test target, to measure optical resolution performance. We determined that the MSSTA II telescopes performed at diffraction-limited resolutions down to 0.70 arcsec at visible wavelengths. Based on these measurements, we calculate an upper bound to the focusing errors that incorporate the sum of all uncorrelated system focus errors that affect resolution performance. Coupling these upper bound estimates with the in-band diffraction limits, surface scattering errors and payload pointing jitter, we demonstrate that 11 of 19 MSSTA II telescopes--having negligible figures of focus errors in comparison to the corresponding visible diffraction limits--performed at sub arcsecond resolution at their operational FUV/EUV/XUV wavelengths during flight. We estimate the in-band performance down to 0.14{+-}0.08 arcsec. (c) 2000 Society of Photo-Optical Instrumentation Engineers.

  6. Lunar transit telescope lander design

    NASA Technical Reports Server (NTRS)

    Omar, Husam A.

    1991-01-01

    The Program Development group at NASA's Marshall Space Flight Center has been involved in studying the feasibility of placing a 16 meter telescope on the lunar surface to scan the skies using visible/ Ultraviolet/ Infrared light frequencies. The precursor telescope is now called the TRANSIT LUNAR TELESCOPE (LTT). The Program Development Group at Marshall Space Flight Center has been given the task of developing the basic concepts and providing a feasibility study on building such a telescope. The telescope should be simple with minimum weight and volume to fit into one of the available launch vehicles. The preliminary launch date is set for 2005. A study was done to determine the launch vehicle to be used to deliver the telescope to the lunar surface. The TITAN IV/Centaur system was chosen. The engineering challenge was to design the largest possible telescope to fit into the TITAN IV/Centaur launch system. The telescope will be comprised of the primary, secondary and tertiary mirrors and their supporting system in addition to the lander that will land the telescope on the lunar surface and will also serve as the telescope's base. The lunar lander should be designed integrally with the telescope in order to minimize its weight, thus allowing more weight for the telescope and its support components. The objective of this study were to design a lander that meets all the constraints of the launching system. The basic constraints of the TITAN IV/Centaur system are given.

  7. Lunar transit telescope lander design

    NASA Technical Reports Server (NTRS)

    Omar, Husam A.

    1992-01-01

    The Program Development group at NASA's Marshall Space Flight Center has been involved in studying the feasibility of placing a 16 meter telescope on the lunar surface to scan the skies using visible/ Ultraviolet/ Infrared light frequencies. The precursor telescope is now called the TRANSIT LUNAR TELESCOPE (LTT). The Program Development Group at Marshall Space Flight Center has been given the task of developing the basic concepts and providing a feasibility study on building such a telescope. The telescope should be simple with minimum weight and volume to fit into one of the available launch vehicles. The preliminary launch date is set for 2005. A study was done to determine the launch vehicle to be used to deliver the telescope to the lunar surface. The TITAN IV/Centaur system was chosen. The engineering challenge was to design the largest possible telescope to fit into the TITAN IV/Centaur launch system. The telescope will be comprised of the primary, secondary and tertiary mirrors and their supporting system in addition to the lander that will land the telescope on the lunar surface and will also serve as the telescope's base. The lunar lander should be designed integrally with the telescope in order to minimize its weight, thus allowing more weight for the telescope and its support components. The objective of this study were to design a lander that meets all the constraints of the launching system. The basic constraints of the TITAN IV/Centaur system are given.

  8. Science operations with Space Telescope

    NASA Technical Reports Server (NTRS)

    Giacconi, R.

    1982-01-01

    The operation, instrumentation, and expected contributions of the Space Telescope are discussed. Space Telescope capabilities are described. The organization and nature of the Space Telescope Science Institute are outlined, including the allocation of observing time and the data rights and data access policies of the institute.

  9. Lowell Observatory's Discovery Channel Telescope

    NASA Astrophysics Data System (ADS)

    Hall, Jeffrey C.

    2017-01-01

    Lowell Observatory broke ground on its 4.3-meter Discovery Channel Telescope (DCT) in July 2005 and celebrated first light for the telescope in July 2012. In this overview to this special session, I will discuss the origin and development of the project, the telescope's general specifications and performance, its current operating status, and the initial instrument suite.

  10. Paper Productivity of Ground-based Large Optical Telescopes from 2000 to 2009

    NASA Astrophysics Data System (ADS)

    Kim, Sang Chul

    2011-08-01

    We present an analysis of the scientific (refereed) paper productivity of the current largest (diameter>8m) ground-based optical (and infrared) telescopes during the ten-year period from 2000 to 2009. The telescopes for which we have gathered and analysed the scientific publication data are the two 10-m Keck telescopes, the four 8.2-m Very Large Telescopes (VLT), the two 8.1-m Gemini telescopes, the 8.2-m Subaru telescope, and the 9.2-m Hobby-Eberly Telescope (HET). We have analysed the numbers of papers published in various astronomical journals produced by using these telescopes. While the total numbers of papers from these observatories are largest for the VLT, followed by Keck, Gemini, Subaru, and HET, the number of papers produced by each component of the telescopes is largest for Keck, followed by VLT, Subaru, Gemini, and HET. In 2009, each telescope of the Keck, VLT, Gemini, Subaru, and HET observatories produced 135, 109, 93, 107, and 5 refereed papers, respectively. We have shown that each telescope of the Keck, VLT, Gemini, and Subaru observatories is producing 2.1+/-0.9 Nature and Science papers annually and these papers make up 1.7+/-0.8% of all refereed papers produced by using each of those telescopes. Extending this relation, we propose that this ratio of the number of Nature and Science papers to the total number of refereed papers that will be produced by future extremely large telescopes (ELTs) will remain similar. From a comparison of the publication trends of the above telescopes, we suggest that (i) having more than one telescope of the same kind at the same location and (ii) increasing the number of instruments available at the telescope are good ways to maximize the paper productivity.

  11. Solar Flares

    NASA Technical Reports Server (NTRS)

    Savage, Sabrina

    2013-01-01

    Because the Earth resides in the atmosphere of our nearest stellar neighbor, events occurring on the Sun's surface directly affect us by interfering with satellite operations and communications, astronaut safety, and, in extreme circumstances, power grid stability. Solar flares, the most energetic events in our solar system, are a substantial source of hazardous space weather affecting our increasingly technology-dependent society. While flares have been observed using ground-based telescopes for over 150 years, modern space-bourne observatories have provided nearly continuous multi-wavelength flare coverage that cannot be obtained from the ground. We can now probe the origins and evolution of flares by tracking particle acceleration, changes in ionized plasma, and the reorganization of magnetic fields. I will walk through our current understanding of why flares occur and how they affect the Earth and also show several examples of these fantastic explosions.

  12. Celestial Objects for Common Telescopes

    NASA Astrophysics Data System (ADS)

    Webb, Thomas William

    2010-06-01

    Introduction; Part I. The Instrument and the Observer: 1. The telescope; 2. The mode of observation; Part II. The Solar System: 1. The Sun; 2. Mercury; 3. Venus; 4. The Moon; 5. Index to the map of the moon; 6. Mars; 7. Jupiter; 8. Saturn; 9. Uranus and Neptune; 10. Comets; Part III. The Starry Heavens: 1. Double stars, clusters, and nebulae; 2. Andromeda; 3. Anser; 4. Antinous; 5. Aquarius; 6. Aquila; 7. Argo Navis; 8. Aries; 9. Auriga; 10. Boötes; 11. Camelopardus; 12. Cancer; 13. Canes Venatici; 14. Canis Major; 15. Canis Minor; 16. Capricornus; 17. Cassiopea; 18. Cepheus; 19. Cetus; 20. Clypeus Sobieskii; 21. Coma Berenices; 22. Corona Borealis; 23. Corvus; 24. Crater; 25. Cygnus; 26. Delphinus; 27. Draco; 28. Equuleus; 29. Eridanus; 30. Gemini; 31. Hercules; 32. Hydra; 33. Lacerta; 34. Leo; 35. Leo Minor; 36. Lepus; 37. Libra; 38. Lynx; 39. Lyra; 40. Monoceros; 41. Ophiuchus; 42. Orion; 43. Pegasus; 44. Perseus; 45. Pisces; 46. Sagitta; 47. Sagittarius; 48. Scorpio; Scutum, see Clypeus, Sobieskii; 49. Serpens; 50. Sextans; 51. Taurus; 52. Taurus Poniatowskii; 53. Triangulum; 54. Ursa Major; 55. Ursa Minor; 56. Virgo; 57. Vulpecula.

  13. The Bionic Telescope

    NASA Astrophysics Data System (ADS)

    Woolf, Neville

    2009-05-01

    Four hundred years after children in a spectacle makers workshop accidentally discovered the telescope, the development of this device has been a continuous replacement of the ``natural'' by the deliberate. The human eye is gone. The lens is gone. The tube is gone. The dome is on the verge of going. The size of the optics are ceasing to be set by transportation limits. Adaptive optics are preferred to stable optics. We deliberately break the Lagrange invariant. We focus on lasers instead of stars, and natural observing environments are being replaced by adaptive environments. The goals for the new ground based telescope encompass the oldest and newest ideas, to find signs of life elsewhere, and to find how all the universe developed.

  14. Telescopic limiting magnitudes

    NASA Technical Reports Server (NTRS)

    Schaefer, Bradley E.

    1990-01-01

    The prediction of the magnitude of the faintest star visible through a telescope by a visual observer is a difficult problem in physiology. Many prediction formulas have been advanced over the years, but most do not even consider the magnification used. Here, the prediction algorithm problem is attacked with two complimentary approaches: (1) First, a theoretical algorithm was developed based on physiological data for the sensitivity of the eye. This algorithm also accounts for the transmission of the atmosphere and the telescope, the brightness of the sky, the color of the star, the age of the observer, the aperture, and the magnification. (2) Second, 314 observed values for the limiting magnitude were collected as a test of the formula. It is found that the formula does accurately predict the average observed limiting magnitudes under all conditions.

  15. Telescopes of galileo.

    PubMed

    Greco, V; Molesini, G; Quercioli, F

    1993-11-01

    The Florentine Istituto e Museo di Storia delta Scienza houses two complete telescopes and a single objective lens (reconstructed from several fragments) that can be attributed to Galileo. These optics have been partially dismantled and made available for optical testing with state-of-the-art equipment. The lenses were investigated individually; the focal length and the radii of curvature were measured, and the optical layout of the instruments was worked out. The optical quality of the surfaces and the overall performance of the two complete telescopes have been evaluated interferometrically at a wavelength of 633 nm (with a He-Ne laser source). It was found in particular that the optics of Galileo came close to attaining diffraction-limited operation.

  16. Galileo's wondrous telescope

    NASA Astrophysics Data System (ADS)

    Cartlidge, Edwin

    2008-06-01

    If you need reminding of just how wrong the great and the good can be, take a trip to the Museum of the History of Science in Florence, Italy. The museum is staging an exhibition entitled "Galileo's telescope - the instrument that changed the world" to mark the 400th anniversary this year of Galileo Galilei's revolutionary astronomical discoveries, which were made possible by the invention of the telescope. At the start of the 17th century, astronomers assumed that all the planets and the stars in the heavens had been identified and that there was nothing new for them to discover, as the exhibition's curator, Giorgio Strano, points out. "No-one could have imagined what wondrous new things were about to be revealed by an instrument created by inserting two eyeglass lenses into the ends of a tube," he adds.

  17. Telescopic horizon scanning.

    PubMed

    Koenderink, Jan

    2014-12-20

    The problem of "distortionless" viewing with terrestrial telescopic systems (mainly "binoculars") remains problematic. The so called "globe effect" is only partially counteracted in modern designs. Theories addressing the phenomenon have never reached definitive closure. In this paper, we show that exact distortionless viewing with terrestrial telescopic systems is not possible in general, but that it is in principle possible in-very frequent in battle field and marine applications-the case of horizon scanning. However, this involves cylindrical optical elements. For opto-electronic systems, a full solution is more readily feasible. The solution involves a novel interpretation of the relevant constraints and objectives. For final design decisions, it is not necessary to rely on a corpus of psychophysical (or ergonomic) data, although one has to decide whether the instrument is intended as an extension of the eye or as a "pictorial" device.

  18. Nonmechanical bifocal zoom telescope.

    PubMed

    Valley, Pouria; Reza Dodge, Mohammad; Schwiegerling, Jim; Peyman, Gholam; Peyghambarian, N

    2010-08-01

    We report on a novel zoom lens with no moving parts in the form of a switchable Galilean telescope. This zoom telescope consists of two flat liquid-crystal diffractive lenses with apertures of 10mm that can each take on the focal lengths of -50 and +100cm, with a spacing of 50cm and, hence, a zoom ratio of 4x. The lenses are driven using a low-voltage ac source with 1.6V and exhibit millisecond switching times. The spectral characteristic of this diffractive zoom system is evaluated for light sources of various bandwidths. Potential applications for this technology include a zoom lens with no moving parts for camera phones and medical imaging devices.

  19. TAUVEX - UV Space Telescope

    NASA Astrophysics Data System (ADS)

    Topaz, Jeremy; Braun, Ofer; Brosch, Noah

    1993-01-01

    The TAUVEX UV Space Telescope currently under construction by El-Op Ltd. in Israel is designed both for recording images of the sky in the UV region and to serve as the optical monitor for the SODART X-Ray Telescope being built by the Danish Space Research Institute. The two systems, together with several other experiments, will be flown on the S-R-G satellite to be launched by the CIS in 1995. TAUVEX will image a field of about 1 deg simultaneously in three spectral bands. In addition, it will record a selected object in a high-speed time-resolved mode in these bands. The concept and design of TAUVEX is described in this paper.

  20. The Neutrino Telescope ANTARES

    NASA Astrophysics Data System (ADS)

    Hernández, Juan José

    Neutrinos can reveal a brand new Universe at high energies. The ANTARES collaboration [1] , formed in 1996, works towards the building and deployment of a neutrino telescope. This detector could observe and study high energy astrophysical sources such as X-ray binary systems, young supernova remnants or Active Galactic Nuclei and help to discover or set exclusion limits on some of the elementary particles and objects that have been put forward as candidates to fill the Universe (WIMPS, neutralinos, topological deffects, Q-balls, etc). A neutrino telescope will certainly open a new observational window and can shed light on the most energetic phenomena of the Universe. A review of the progress made by the ANTARES collaboration to achieve this goal is presented