Science.gov

Sample records for 1-n-butyl-3-methylimidazolium chloride bmimcl

  1. Preparation of cellulose/polyvinyl alcohol biocomposite films using 1-n-butyl-3-methylimidazolium chloride.

    PubMed

    Abdulkhani, Ali; Hojati Marvast, Ebrahim; Ashori, Alireza; Hamzeh, Yahya; Karimi, Ali Naghi

    2013-11-01

    This study has been focused on developing cellulose/polyvinyl alcohol (PVA), a biocomposite film, pretreated with 1-n-butyl-3-methylimidazolium chloride ([bmim]Cl). The dissolved polymers were blended and their biocomposite films including cellulose and cellulose/PVA were prepared. The effect of PVA composition with cellulose was evaluated by comparing the physical, mechanical, chemical and thermal characteristics of produced films with neat cellulosic film. The results showed that the ionic liquid had a great capability in dissolving the polymers. Furthermore, in composition of the raw cellulose some chemical bonds were incorporated between the two components. Water uptake, thickness swelling and water vapor permeability of blend films were increased comparing to cellulosic film. Mechanical strength and Young's modulus of the films made of cellulose/PVA were decreased while the strain at break was increased. The optical transparency and thermal properties of the blend films were almost the same as neat cellulosic film. This work demonstrated a promising route for the preparation of biodegradable green composites. In addition, this biocomposite film is composed of sustainable biodegradable resources, which is suitable for release to the environment. The biocomposite films showed good optical transparency, thermal stabilities properties.

  2. Molecular Dynamics Simulations of the Ionic Liquid 1-n-Butyl-3-Methylimidazolium Chloride and Its Binary Mixtures with Ethanol.

    PubMed

    Chen, Mo; Pendrill, Robert; Widmalm, Göran; Brady, John W; Wohlert, Jakob

    2014-10-14

    Room temperature ionic liquids (ILs) of the imidazolium family have attracted much attention during the past decade for their capability to dissolve biomass. Besides experimental work, numerous compuational studies have been concerned with the physical properties of both neat ILs and their interactions with different solutes, in particular, carbohydrates. Many classical force fields designed specifically for ILs have been found to yield viscosities that are too high for the liquid state, which has been attributed to the fact that the effective charge densities are too high due to the lack of electronic polarizability. One solution to this problem has been uniform scaling of the partial charges by a scale factor in the range 0.6-0.9, depending on model. This procedure has been shown to improve the viscosity of the models, and also to positively affect other properties, such as diffusion constants and ionic conductivity. However, less attention has been paid to how this affects the overall thermodynamics of the system, and the problems it might create when the IL models are combined with other force fields (e.g., for solutes). In the present work, we employ three widely used IL force fields to simulate 1-n-butyl-3-methyl-imidazolium chloride in both the crystal and the liquid state, as well as its binary mixture with ethanol. Two approaches are used: one in which the ionic charge is retained at its full integer value and one in which the partial charges are uniformly reduced to 85%. We investigate and calculate crystal and liquid structures, molar heat capacities, heats of fusion, self-diffusion constants, ionic conductivity, and viscosity for the neat IL, and ethanol activity as a function of ethanol concentration for the binary mixture. We show that properties of the crystal are less affected by charge scaling compared to the liquid. In the liquid state, transport properties of the neat IL are generally improved by scaling, whereas values for the heat of fusion are

  3. Understanding the large solubility of lidocaine in 1-n-butyl-3-methylimidazolium based ionic liquids using molecular simulation

    NASA Astrophysics Data System (ADS)

    Ley, Ryan T.; Paluch, Andrew S.

    2016-02-01

    Room temperature ionic liquids have been proposed as replacement solvents in a wide range of industrial separation processes. Here, we focus on the use of ionic liquids as solvents for the pharmaceutical compound lidocaine. We show that the solubility of lidocaine in seven common 1-n-butyl-3-methylimidazolium based ionic liquids is greatly enhanced relative to water. The predicted solubility is greatest in [BMIM]+[CH3CO2]-, which we find results from favorable hydrogen bonding between the lidocaine amine hydrogen and the [CH3CO2]- oxygen, favorable electrostatic interactions between the lidocaine amide oxygen with the [BMIM]+ aromatic ring hydrogens, while lidocaine does not interfere with the association of [BMIM]+ with [CH3CO2]-. Additionally, by removing functional groups from the lidocaine scaffold while maintaining the important amide group, we found that as the van der Waals volume increases, solubility in [BMIM]+[CH3CO2]- relative to water increases.

  4. Understanding the large solubility of lidocaine in 1-n-butyl-3-methylimidazolium based ionic liquids using molecular simulation.

    PubMed

    Ley, Ryan T; Paluch, Andrew S

    2016-02-28

    Room temperature ionic liquids have been proposed as replacement solvents in a wide range of industrial separation processes. Here, we focus on the use of ionic liquids as solvents for the pharmaceutical compound lidocaine. We show that the solubility of lidocaine in seven common 1-n-butyl-3-methylimidazolium based ionic liquids is greatly enhanced relative to water. The predicted solubility is greatest in [BMIM](+)[CH3CO2](-), which we find results from favorable hydrogen bonding between the lidocaine amine hydrogen and the [CH3CO2](-) oxygen, favorable electrostatic interactions between the lidocaine amide oxygen with the [BMIM](+) aromatic ring hydrogens, while lidocaine does not interfere with the association of [BMIM](+) with [CH3CO2](-). Additionally, by removing functional groups from the lidocaine scaffold while maintaining the important amide group, we found that as the van der Waals volume increases, solubility in [BMIM](+)[CH3CO2](-) relative to water increases. PMID:26931706

  5. Magnetic ionic liquids produced by the dispersion of magnetic nanoparticles in 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf2).

    PubMed

    Medeiros, Anderson M M S; Parize, Alexandre L; Oliveira, Vanda M; Neto, Brenno A D; Bakuzis, Andris F; Sousa, Marcelo H; Rossi, Liane M; Rubim, Joel C

    2012-10-24

    ̀This paper reports on the advancement of magnetic ionic liquids (MILs) as stable dispersions of surface-modified γ-Fe(2)O(3), Fe(3)O(4), and CoFe(2)O(4) magnetic nanoparticles (MNPs) in a hydrophobic ionic liquid, 1-n-butyl 3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf(2)). The MNPs were obtained via coprecipitation and were characterized using powder X-ray diffraction, transmission electron microscopy, Raman spectroscopy and Fourier transform near-infrared (FT-NIR) spectroscopy, and magnetic measurements. The surface-modified MNPs (SM-MNPs) were obtained via the silanization of the MNPs with the aid of 1-butyl-3-[3-(trimethoxysilyl)propyl]imidazolium chloride (BMSPI.Cl). The SM-MNPs were characterized by Raman spectroscopy and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy and by magnetic measurements. The FTIR-ATR spectra of the SM-MNPs exhibited characteristic absorptions of the imidazolium and those of the Fe-O-Si-C moieties, confirming the presence of BMSPI.Cl on the MNP surface. Thermogravimetric analysis (TGA) showed that the SM-MNPs were modified by at least one BMSPI.Cl monolayer. The MILs were characterized using Raman spectroscopy, differential scanning calorimetry (DSC), and magnetic measurements. The Raman and DSC results indicated an interaction between the SM-MNPs and the IL. This interaction promotes the formation of a supramolecular structure close to the MNP surface that mimics the IL structure and is responsible for the stability of the MIL. Magnetic measurements of the MILs indicated no hysteresis. Superparamagnetic behavior and a saturation magnetization of ~22 emu/g could be inferred from the magnetic measurements of a sample containing 50% w/w γ-Fe(2)O(3) SM-MNP/BMI.NTf(2).

  6. How hydrogen bonds influence the mobility of imidazolium-based ionic liquids. A combined theoretical and experimental study of 1-n-butyl-3-methylimidazolium bromide.

    PubMed

    Kohagen, Miriam; Brehm, Martin; Lingscheid, Yves; Giernoth, Ralf; Sangoro, Joshua; Kremer, Friedrich; Naumov, Sergej; Iacob, Ciprian; Kärger, Jörg; Valiullin, Rustem; Kirchner, Barbara

    2011-12-29

    The virtual laboratory allows for computer experiments that are not accessible via real experiments. In this work, three previously obtained charge sets were employed to study the influence of hydrogen bonding on imidazolium-based ionic liquids in molecular dynamics simulations. One set provides diffusion coefficients in agreement with the experiment and is therefore a good model for real-world systems. Comparison with the other sets indicates hydrogen bonding to influence structure and dynamics differently. Furthermore, in one case the total charge was increased and in another decreased by 0.1 e. Both the most acidic proton as well as the corresponding carbon atom were artificially set to zero, sequentially and simultaneously. In the final setup a negative charge was placed on the proton in order to introduce a barrier for the anion to contact the cation via this most acidic hydrogen atom. The following observations were made: changing the hydrogen bonding ability strongly influences the structure while the dynamic properties, such as diffusion and viscosity, are only weakly changed. However, the introduction of larger alterations (stronger hydrogen bonding and antihydrogen bonding) also strongly influences the diffusion coefficients. The dynamics of the hydrogen bond, ion pairing, and the ion cage are all affected by the level of hydrogen bonding. A change in total charges predominantly influences transport properties rather than structure. For ion cage dynamics with respect to transport porperties, we find a good correlation and a weak or no correlation for the ion pair or the hydrogen bond dynamics, respectively. Nevertheless, the hydrogen bond does influence ion cage dynamics. Therefore, we confirm that ionic liquids rather consist of loosely interacting counterions than of discrete ion pairs. Hydrogen bonding affects the properties only in a secondary or indirect manner.

  7. Chemical modification of cellulose by in situ reactive extrusion in ionic liquid.

    PubMed

    Zhang, Yue; Li, Haifeng; Li, Xinda; Gibril, Magdi E; Yu, Muhuo

    2014-01-01

    In order to prepare the spinning solution of cellulose with high concentration in environmentally friendly solvent, cellulose was chemically modified by in situ reactive extrusion with several chemicals, such as urea, phthalic anhydride (PA), maleic anhydride (MA) and butyl glycidyl ether (BGE) and with ionic liquid namely 1-N-butyl-3-methylimidazolium chloride (BMIMCl) as reaction medium. These four modifiers all in situ grafted onto cellulose and the modification effectiveness was found to decrease in the sequence, MA>PA>BGE>urea. The formation of side chain on cellulose backbone destroyed the regularity of cellulose chains and the hydrogen bond network efficiently. The concentration of modified cellulose in spinning solution can be up to 14-25%, comparing with 9% for unmodified cellulose in BMIMCl. The high solid content results in high efficiency and less energy consumption of fiber production and solvent recycle. PMID:24274488

  8. Formation of higher chloride complexes of Np(IV) and Pu(IV) in water-stable room-temperature ionic liquid [BuMeIm][Tf2N].

    PubMed

    Nikitenko, Sergey I; Moisy, Philippe

    2006-02-01

    A UV/vis/near-IR spectroscopic study shows that in [BuMeIm][(CF3SO2)2N] hydrophobic room-temperature ionic liquid solutions, [BuMeIm]2[AnCl6] complexes, where BuMeIm+ is 1-n-butyl-3-methylimidazolium and An(IV) is Np(IV) or Pu(IV), have an octahedral An(IV) environment similar to that observed in solid complexes. Water has no influence on the absorption spectra of AnCl6(2-) complexes, indicating their stability to hydrolysis in ionic liquid. Adding [BuMeIm]Cl modifies the UV/vis/near-IR absorption spectra of An(IV) in the ionic liquid and causes solids to precipitate. The solid-state reflectance spectra of the precipitates reveal considerable differences from the corresponding An(IV) hexachloro complexes. A voltammetric study indicates that AnCl6(2-) complexes are electrochemically inert in [BuMeIm][(CF3SO2)2N] at the glassy carbon working electrode. By contrast, quasi-reversible electrochemical reduction An(IV)/An(III) and An(IV) oxidation are observed in ionic liquids in the presence of [BuMeIm]Cl. The oxidation wave of noncoordinated chloride ions interferes with the An(IV) oxidation waves. The spectroscopic and voltammetric data clearly indicate the formation of nonoctahedral actinide(IV) chloride complexes with a Cl-/An(IV) ratio exceeding 6/1 in [BuMeIm][(CF3SO2)2N] in excess chloride ions.

  9. A comparison of methods for melting point calculation using molecular dynamics simulations

    SciTech Connect

    Zhang, Y; Maginn, EJ

    2012-04-14

    Accurate and efficient prediction of melting points for complex molecules is still a challenging task for molecular simulation, although many methods have been developed. Four melting point computational methods, including one free energy-based method (the pseudo-supercritical path (PSCP) method) and three direct methods (two interface-based methods and the voids method) were applied to argon and a widely studied ionic liquid 1-n-butyl-3-methylimidazolium chloride ([BMIM][Cl]). The performance of each method was compared systematically. All the methods under study reproduce the argon experimental melting point with reasonable accuracy. For [BMIM][Cl], the melting point was computed to be 320 K using a revised PSCP procedure, which agrees with the experimental value 337-339 K very well. However, large errors were observed in the computed results using the direct methods, suggesting that these methods are inappropriate for large molecules with sluggish dynamics. The strengths and weaknesses of each method are discussed. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.3702587

  10. Hydrolysis of insoluble cellulose to glucose catalyzed by cellulase-containing liposomes in an aqueous solution of 1-butyl-3-methylimidazolium chloride.

    PubMed

    Yoshimoto, Makoto; Tanimura, Kazuhiko; Tokunaga, Kazuki; Kamimura, Akio

    2013-01-01

    The liposome containing cellulase from Trichoderma viride was prepared under the condition that an appreciable amount of cellulase was incorporated in lipid membranes. The liposomal cellulase and free enzyme were examined in their hydrolytic activities to insoluble cellulose powder CC31 in the acetate buffer solution (pH 4.8) of 15 w/w% [Bmim][Cl] (1-butyl-3-methylimidazolium chloride). The mean diameter and size distribution of cellulase-containing liposome were practically unchanged under the above condition. The free cellulase was deactivated more rapidly than the liposomal cellulase in catalyzing the hydrolysis of 2.0 g/l CC31 at 45°C in the presence of [Bmim][Cl] for 48 h. The activities of liposomal and free cellulase to cellobiose as soluble substrate were less susceptible to [Bmim][Cl] than their cellulolytic activities to CC31, meaning that β-glucosidase is relatively stable among the three enzyme components of cellulase. The rate of glucose production could be appreciably improved by the pretreatment of CC31 with [Bmim][Cl] alone at 120°C for 30 min followed by the liposomal cellulase-catalyzed hydrolysis of the substrate at 45°C at the [Bmim][Cl] concentration of 15 w/w%. PMID:23813807

  11. Melting and freezing behaviors of prototype ionic liquids, 1-butyl-3-methylimidazolium bromide and its chloride, studied by using a nano-Watt differential scanning calorimeter.

    PubMed

    Nishikawa, Keiko; Wang, Shaolan; Katayanagi, Hideki; Hayashi, Satoshi; Hamaguchi, Hiro-o; Koga, Yoshikata; Tozaki, Ken-ichi

    2007-05-10

    1-Butyl-3-methylimidazolium bromide ([bmim]Br) and its chloride ([bmim]Cl) are representative prototypes of ionic liquids. We investigated the melting and freezing behaviors of [bmim]Br and [bmim]Cl by using a homemade differential scanning calorimeter (DSC) with nano-Watt stability and sensitivity. The measurements were carried out at heating and cooling rates slow enough to mimic quasi-static processes. Their thermal behaviors of melting and freezing show characteristic features such as a wide pre-melting range and excessive supercooling and individual behaviors of single crystals even for the same substance. The melting temperatures of [bmim]Br and [bmim]Cl were determined from the broad DSC traces and discussed in relation to the crystal structure. We suggest that the observed characteristics are due to the dynamics of the cooperative change between gauche-trans (GT) and trans-trans (TT) conformations of the butyl group in the [bmim]+ cation.

  12. Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

    SciTech Connect

    Baker, Gary A; Heller, William T

    2009-01-01

    As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

  13. A two step method for the preparation of carbamate cross-linked cellulose films using an ionic liquid and their water retention properties.

    PubMed

    Amarasekara, Ananda S; Hasan, Muhammad A; Ha, Uyen

    2016-12-10

    Carbamate cross-linked cellulose films can be prepared in a two step method using cellulose dissolved in 1-n-butyl-3-methylimidazolium chloride ionic liquid. The new technique involves casting the film from cellulose ionic liquid solution onto a glass surface and application of alkyl/aryl diisocyanate in dry dimethylsulfoxide solution onto the cellulose - ionic liquid coating on glass and allowing the cross-linking reaction to occur on the pre-formed cellulose coating. The carbamate cross-linked cellulose films formed were characterized by FT-IR, and TG-DTA. The water retention values of the films are shown to decrease with the increase in hydrophobicity of the alky/aryl group linker in the carbamate bridges. PMID:27577890

  14. A two step method for the preparation of carbamate cross-linked cellulose films using an ionic liquid and their water retention properties.

    PubMed

    Amarasekara, Ananda S; Hasan, Muhammad A; Ha, Uyen

    2016-12-10

    Carbamate cross-linked cellulose films can be prepared in a two step method using cellulose dissolved in 1-n-butyl-3-methylimidazolium chloride ionic liquid. The new technique involves casting the film from cellulose ionic liquid solution onto a glass surface and application of alkyl/aryl diisocyanate in dry dimethylsulfoxide solution onto the cellulose - ionic liquid coating on glass and allowing the cross-linking reaction to occur on the pre-formed cellulose coating. The carbamate cross-linked cellulose films formed were characterized by FT-IR, and TG-DTA. The water retention values of the films are shown to decrease with the increase in hydrophobicity of the alky/aryl group linker in the carbamate bridges.

  15. Characterization of the influence of 1-butyl-3-methylimidazolium chloride on the structure and thermal stability of green fluorescent protein

    SciTech Connect

    Heller, William T; O'Neill, Hugh Michael; Zhang, Qiu; Baker, Gary A

    2010-01-01

    Ionic liquids (ILs) are finding a vast array of applications as novel solvents for a wide variety of processes that include enzymatic chemistry, particularly as more biocompatible ILs are designed and discovered. While it is assumed that a native or near-native structure is required for enzymatic activity, there is some evidence that ILs alter protein structure and oligomerization states in a manner than can negatively impact function. The IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, is a well-studied, water-miscible member of the popular 1-alkyl-3-methylimidazolium IL family. To improve our understanding of the impact of water-miscible ILs on proteins, we have characterized the structure and oligomerization state of green fluorescent protein (GFP) in aqueous solutions containing 25 and 50 vol % [bmim]Cl using a combination of optical spectroscopy and small-angle neutron scattering (SANS). Measurements were also performed as a function of temperature to provide insight into the effect of the IL on the thermal stability of GFP. While GFP exists as a dimer in water, the presence of 25 vol % [bmim]Cl causes GFP to transition to a monomeric state. The SANS data indicate that GFP is a great deal less compact in 50 vol % [bmim]Cl than in neat water, indicative of unfolding from the native structure. The oligomerization state of the protein in IL-containing aqueous solution changes from a dimer to a monomer in response to the IL, but does not change as a function of temperature in the IL-containing solution. The SANS and spectroscopic results also demonstrate that the addition of [bmim]Cl to the solution decreases the thermal stability of GFP, allowing the protein to unfold at lower temperatures than in aqueous solution.

  16. Highly ordered cellulose II crystalline regenerated from cellulose hydrolyzed by 1-butyl-3-methylimidazolium chloride.

    PubMed

    Ahn, Yongjun; Song, Younghan; Kwak, Seung-Yeop; Kim, Hyungsup

    2016-02-10

    This research focused on the preparation of highly ordered cellulose II crystalline by cellulose hydrolysis in ionic liquid, and the influence of molecular mobility on recrystallization of cellulose. The molar mass of cellulose was controlled by hydrolysis using 1-butyl-3-methylimidazolium chloride (BmimCl). The molecular mobility of cellulose dissolved in BmimCl was characterized by rheological properties. After characterization of cellulose solution and regeneration, change of molar mass and conversion to crystalline were monitored using gel-permeation chromatography and powder X-ray diffraction, respectively. The molar mass of the cellulose in BmimCl was remarkably decreased with an increase in duration time, resulting in better mobility and a lower conformational constraint below critical molar mass. The decrease in molar mass surprisingly increased the crystallinity up to ∼ 85%, suggesting a recrystallization rate dependence of the mobility. The correlation between the mobility and recrystallization rate represented quit different behavior above and below a critical molar mass, which strongly demonstrated to the effect of mobility on the conversion of amorphous state to crystalline structure.

  17. Comparison and Characterisation of Regenerated Chitosan from 1-Butyl-3-methylimidazolium Chloride and Chitosan from Crab Shells.

    PubMed

    Islam, Saniyat; Arnold, Lyndon; Padhye, Rajiv

    2015-01-01

    Chitosan is a biopolymer derived from chitin which is naturally occurring in the exoskeleton of crustaceans. This paper reports dissolution and regeneration of chitosan by directly dissolving in an ionic liquid solvent, 1-butyl-3-methylimidazolium chloride (BMIMCl). This will provide an ideal platform to solubilise these kinds of polymers to achieve the dissolution. The current study dissolved chitosan from crab shell utilising BMIMCl as a solvent and characterised the resultant regenerated polymer. The regenerated chitosan showed increased hydrogen bonding when characterised by Fourier transform infrared (FTIR) spectral analysis. In addition, the study also compared the characteristics of regenerated and generic chitosan. The regenerated chitosan was also evaluated for antimicrobial properties and showed to possess antibacterial features similar to the commercial grade. This method can be utilised in future for blending of polymers with chitosan in a dissolved phase.

  18. Comparison and Characterisation of Regenerated Chitosan from 1-Butyl-3-methylimidazolium Chloride and Chitosan from Crab Shells

    PubMed Central

    Arnold, Lyndon

    2015-01-01

    Chitosan is a biopolymer derived from chitin which is naturally occurring in the exoskeleton of crustaceans. This paper reports dissolution and regeneration of chitosan by directly dissolving in an ionic liquid solvent, 1-butyl-3-methylimidazolium chloride (BMIMCl). This will provide an ideal platform to solubilise these kinds of polymers to achieve the dissolution. The current study dissolved chitosan from crab shell utilising BMIMCl as a solvent and characterised the resultant regenerated polymer. The regenerated chitosan showed increased hydrogen bonding when characterised by Fourier transform infrared (FTIR) spectral analysis. In addition, the study also compared the characteristics of regenerated and generic chitosan. The regenerated chitosan was also evaluated for antimicrobial properties and showed to possess antibacterial features similar to the commercial grade. This method can be utilised in future for blending of polymers with chitosan in a dissolved phase. PMID:26090452

  19. Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose.

    PubMed

    Qi, Xinhua; Li, Luyang; Tan, Tengfei; Chen, Wenting; Smith, Richard L

    2013-03-19

    Functional carbonaceous material (FCM) loaded with carboxylic groups was prepared by hydrothermal carbonization of cellulose in the presence of acrylic acid. The resulting FCM was used as adsorbent for recovery of a water-soluble ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). The FCM consisted of microspheres (100-150 nm) and had a low surface area (ca. 20 m(2)/g), but exhibited adsorption capacity comparable to that of commercial activated carbon which can be attributed to the presence of high content of polar oxygenated groups (-OH, -C═O, -COOH) as revealed by spectral analyses. Sorption of [BMIM][Cl] onto FCM adsorbent could be well-described by pseudo-second-order kinetics. Thermodynamic and adsorption isothermal analyses revealed that the adsorption process was spontaneous, exothermic, and could be described by the Freundlich adsorption model. The FCM adsorbent could be regenerated effectively and recycled for at least three times without loss of adsorption capacity. The results of this work provide a facile method for production of functional carbonaceous materials from renewable resources that can be used for treatment of aqueous streams containing small concentrations of ionic liquid, [BMIM][Cl]. PMID:23410095

  20. Influence of the current density on the electrochemical treatment of concentrated 1-butyl-3-methylimidazolium chloride solutions on diamond electrodes.

    PubMed

    Marcionilio, Suzana M L de Oliveira; Alves, Gisele M; E Silva, Rachel B Góes; Marques, Pablo J Lima; Maia, Poliana D; Neto, Brenno A D; Linares, José J

    2016-10-01

    This paper focuses on the influence of the current density treatment of a concentrated 1-butyl-3-methylimidazolium chloride (BMImCl) solution on an electrochemical reactor with a boron-doped diamond (BDD) anode. The decrease in the total organic carbon (TOC) and the BMImCl concentration demonstrate the capability of BDD in oxidizing ionic liquids (ILs) and further mineralizing (to CO2 and NO3 (-)) more rapidly at higher current densities in spite of the reduced current efficiency of the process. Moreover, the presence of Cl(-) led to the formation of oxychlorinated anions (mostly ClO3 (-) and ClO4 (-)) and, in combination with the ammonia generated in the cathode from the nitrate reduction, chloramines, more intensely at higher current density. Finally, the analysis of the intermediates formed revealed no apparent influence of the current density on the BMImCl degradation mechanism. The current density presents therefore a complex influence on the IL treatment process that is discussed throughout this paper.

  1. Adsorption of 1-butyl-3-methylimidazolium chloride ionic liquid by functional carbon microspheres from hydrothermal carbonization of cellulose.

    PubMed

    Qi, Xinhua; Li, Luyang; Tan, Tengfei; Chen, Wenting; Smith, Richard L

    2013-03-19

    Functional carbonaceous material (FCM) loaded with carboxylic groups was prepared by hydrothermal carbonization of cellulose in the presence of acrylic acid. The resulting FCM was used as adsorbent for recovery of a water-soluble ionic liquid, 1-butyl-3-methyl-imidazolium chloride ([BMIM][Cl]). The FCM consisted of microspheres (100-150 nm) and had a low surface area (ca. 20 m(2)/g), but exhibited adsorption capacity comparable to that of commercial activated carbon which can be attributed to the presence of high content of polar oxygenated groups (-OH, -C═O, -COOH) as revealed by spectral analyses. Sorption of [BMIM][Cl] onto FCM adsorbent could be well-described by pseudo-second-order kinetics. Thermodynamic and adsorption isothermal analyses revealed that the adsorption process was spontaneous, exothermic, and could be described by the Freundlich adsorption model. The FCM adsorbent could be regenerated effectively and recycled for at least three times without loss of adsorption capacity. The results of this work provide a facile method for production of functional carbonaceous materials from renewable resources that can be used for treatment of aqueous streams containing small concentrations of ionic liquid, [BMIM][Cl].

  2. Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel

    PubMed Central

    Dharaskar, Swapnil A.; Varma, Mahesh N.; Shende, Diwakar Z.; Yoo, Chang Kyoo; Wasewar, Kailas L.

    2013-01-01

    The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency. PMID:24307868

  3. Chloride Test

    MedlinePlus

    ... Addison disease, or increased salt intake. If both chloride and sodium levels are high in a person on a ... anything else I should know? Drugs that affect sodium blood levels will also cause changes in chloride. In addition, swallowing large amounts of baking soda ...

  4. Vinyl chloride and polyvinyl chloride.

    PubMed

    Lewis, R

    1999-01-01

    Polyvinyl chloride (PVC) is an important plastic resin for construction, pipe and tubing, siding, and other uses. Exposures to vinyl chloride monomer during the early years of production resulted in an important sentinel health event: the recognition of an excess of a rare liver cancer, hepatic angiosarcoma, at facilities throughout the world. Several other syndromes, including acro-osteolysis, also have been associated with PVC, but less clearly with vinyl chloride. Extensive research ranging from large-scale epidemiologic studies to biomarker research into molecular mechanisms continues to provide valuable insight into the pathogenesis of occupational cancer.

  5. Rheological Behaviors of Polyacrylonitrile/1-Butyl-3-Methylimidazolium Chloride Concentrated Solutions

    PubMed Central

    Liu, Weiwei; Cheng, Lingyan; Zhang, Hongyan; Zhang, Yumei; Wang, Huaping; Yu, Mingfang

    2007-01-01

    One of the room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was chosen to prepare the concentrated solutions of Polyacrylonitrile (PAN). The rheological behaviors of the solutions were measured with rotational rheometry under different conditions, including temperatures, concentration, and molecular weight of PAN. The solutions exhibited shear-thinning behaviors, similar to that of PAN/DMF solutions. The viscosities decreased with the increasing of shear rates. However, the viscosity decreased sharply at high shear rates when the concentration was up to 16wt%. The dependence of the viscosity on temperature was analyzed through the determination of the apparent activation energy. Unusually, the viscosity of solutions of higher concentration is lower than that of lower concentration. Similarly, the viscosity of low molecular weight PAN was higher than high molecular weight PAN at high shear rates. The dynamic rheological measurement indicates the loss modulus is much higher than storage modulus. The trend of complex viscosity is similar with the result of static rheological measurement. The interaction between PAN and ionic liquid [BMIM]Cl was discussed.

  6. Mepiquat chloride

    Integrated Risk Information System (IRIS)

    Mepiquat chloride ; CASRN 24307 - 26 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  7. Methyl chloride

    Integrated Risk Information System (IRIS)

    Methyl chloride ; CASRN 74 - 87 - 3 ( 07 / 17 / 2001 ) Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for

  8. Ethyl chloride

    Integrated Risk Information System (IRIS)

    Ethyl chloride ; CASRN 75 - 00 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  9. Benzyl chloride

    Integrated Risk Information System (IRIS)

    Benzyl chloride ; CASRN 100 - 44 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic E

  10. Vinyl chloride

    Integrated Risk Information System (IRIS)

    Vinyl chloride ; CASRN 75 - 01 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  11. Acetyl chloride

    Integrated Risk Information System (IRIS)

    Acetyl chloride ; CASRN 75 - 36 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  12. Hydrogen chloride

    Integrated Risk Information System (IRIS)

    Hydrogen chloride ; CASRN 7647 - 01 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogeni

  13. Allyl chloride

    Integrated Risk Information System (IRIS)

    Allyl chloride ; CASRN 107 - 05 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  14. Electron density analysis of 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    del Olmo, Lourdes; Morera-Boado, Cercis; López, Rafael; García de la Vega, José M

    2014-06-01

    An analysis of the electron density of different conformers of the 1-butyl-3-methylimidazolium chloride (bmimCl) ionic liquid by using DFT through the BVP86 density functional has been obtained within the framework of Bader's atom in molecules (AIM), localized orbital locator (LOL), natural bond orbital (NBO), and deformed atoms in molecules (DAM). We also present an analysis of the reduced density gradients that deliver the non-covalent interaction regions and allow to understand the nature of intermolecular interactions. The most polar conformer can be characterized as ionic by AIM, LOL, and DAM methods while the most stable and the least polar shows shared-type interactions. The NBO method allows to comprehend what causes the stabilization of the most stable conformer based on analysis of the second-order perturbative energy and the charge transferred among the natural orbitals involved in the interaction. PMID:24878801

  15. Electron density analysis of 1-butyl-3-methylimidazolium chloride ionic liquid.

    PubMed

    del Olmo, Lourdes; Morera-Boado, Cercis; López, Rafael; García de la Vega, José M

    2014-06-01

    An analysis of the electron density of different conformers of the 1-butyl-3-methylimidazolium chloride (bmimCl) ionic liquid by using DFT through the BVP86 density functional has been obtained within the framework of Bader's atom in molecules (AIM), localized orbital locator (LOL), natural bond orbital (NBO), and deformed atoms in molecules (DAM). We also present an analysis of the reduced density gradients that deliver the non-covalent interaction regions and allow to understand the nature of intermolecular interactions. The most polar conformer can be characterized as ionic by AIM, LOL, and DAM methods while the most stable and the least polar shows shared-type interactions. The NBO method allows to comprehend what causes the stabilization of the most stable conformer based on analysis of the second-order perturbative energy and the charge transferred among the natural orbitals involved in the interaction.

  16. Chloride in diet

    MedlinePlus

    ... found in table salt or sea salt as sodium chloride. It is also found in many vegetables. Foods ... Nutrition Board. Dietary Reference Intakes for Water, Potassium, Sodium, Chloride, and Sulfate. National Academy Press, Washington, DC: 2005. ...

  17. CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING IN CENTER, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING IN CENTER, CALCIUM CHLORIDE STORAGE BUILDING ON RIGHT WITH SA (SODA ASH) BUILDING IN RIGHT BACKGROUND. - Solvay Process Company, Calcium Chloride Plant, Between Willis & Milton Avenues, Solvay, Onondaga County, NY

  18. Phosphonium chloride for thermal storage

    NASA Technical Reports Server (NTRS)

    Sutton, J. G.; Heimlich, P. F.; Tepper, E. H.

    1972-01-01

    Development of systems for storage of thermal energy is discussed. Application of phosphonium chloride for heat storage through reversible dissociation is described. Chemical, physical, and thermodynamic properties of phosphonium chloride are analyzed and dangers in using phosphonium chloride are explained.

  19. Chloride flux in phagocytes.

    PubMed

    Wang, Guoshun

    2016-09-01

    Phagocytes, such as neutrophils and macrophages, engulf microbes into phagosomes and launch chemical attacks to kill and degrade them. Such a critical innate immune function necessitates ion participation. Chloride, the most abundant anion in the human body, is an indispensable constituent of the myeloperoxidase (MPO)-H2 O2 -halide system that produces the potent microbicide hypochlorous acid (HOCl). It also serves as a balancing ion to set membrane potentials, optimize cytosolic and phagosomal pH, and regulate phagosomal enzymatic activities. Deficient supply of this anion to or defective attainment of this anion by phagocytes is linked to innate immune defects. However, how phagocytes acquire chloride from their residing environment especially when they are deployed to epithelium-lined lumens, and how chloride is intracellularly transported to phagosomes remain largely unknown. This review article will provide an overview of chloride protein carriers, potential mechanisms for phagocytic chloride preservation and acquisition, intracellular chloride supply to phagosomes for oxidant production, and methods to measure chloride levels in phagocytes and their phagosomes. PMID:27558337

  20. CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING ON LEFT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CALCIUM CHLORIDE PLANT LOOKING EAST. CALCIUM CHLORIDE BUILDING ON LEFT, CALCIUM CHLORIDE STORAGE BUILDING ON RIGHT OF CENTER WITH TOP OF SA (SODA ASH) BUILDING IN RIGHT BACKGROUND. - Solvay Process Company, Calcium Chloride Plant, Between Willis & Milton Avenues, Solvay, Onondaga County, NY

  1. Strontium-89 Chloride

    MedlinePlus

    ... ask your doctor or pharmacist for more information.Strontium-89 chloride is in a class of drugs known as radioisotopes. It delivers radiation to cancer sites and ultimately decreases bone pain. The length of treatment depends on the ...

  2. Mercuric chloride poisoning

    MedlinePlus

    ... Mercuric chloride is a very poisonous form of mercury. It is a type of mercury salt. There are different types of mercury poisonings . This article discusses poisoning from swallowing mercuric ...

  3. Hydrogen chloride test set

    NASA Technical Reports Server (NTRS)

    Workman, G. L.

    1976-01-01

    Detector uses tertiary amine, which makes reaction fairly specific for relatively small highly polarized hydrogen chloride molecule. Reaction is monitored by any microbalance capable of measuring extremely small mass differences in real time.

  4. Ionic liquids entrapped in reverse micelles as nanoreactors for bimolecular nucleophilic substitution reaction. Effect of the confinement on the chloride ion availability.

    PubMed

    Blach, Diana; Pessêgo, Marcia; Silber, Juana J; Correa, N Mariano; García-Río, Luis; Falcone, R Darío

    2014-10-21

    In this work was explored how the confinement of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (bmimCl) and 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), inside toluene/benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) affects the Cl(-) nucleophilicity on the bimolecular nucleophilic substitution (SN2) reaction between this anion and dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate. The results obtained show that, upon confinement, the ionic interactions between the ILs with the cationic surfactant polar head group and the surfactant counterion modify substantially the performance of both ILs as solvents. In toluene/BHDC/bmimCl RMs, the Cl(-) interacts strongly with bmim(+) (and/or BHD(+)) in such a way that its nucleophilicity is reduced in comparison with neat IL. In toluene/BHDC/bmimBF4 RMs, an ionic exchange equilibrium produces segregation of bmim(+) and BF4(-) ions, changing the composition of the RMs interface and affecting dramatically the Cl(-) availability. These results show the versatility of this kind of organized system to alter the ionic organization and influence on reaction rate when used as nanoreactors.

  5. Chloride Channels of Intracellular Membranes

    PubMed Central

    Edwards, John C.; Kahl, Christina R.

    2010-01-01

    Proteins implicated as intracellular chloride channels include the intracellular ClC proteins, the bestrophins, the cystic fibrosis transmembrane conductance regulator, the CLICs, and the recently described Golgi pH regulator. This paper examines current hypotheses regarding roles of intracellular chloride channels and reviews the evidence supporting a role in intracellular chloride transport for each of these proteins. PMID:20100480

  6. Chloride channels as drug targets

    PubMed Central

    Verkman, Alan S.; Galietta, Luis J. V.

    2013-01-01

    Chloride channels represent a relatively under-explored target class for drug discovery as elucidation of their identity and physiological roles has lagged behind that of many other drug targets. Chloride channels are involved in a wide range of biological functions, including epithelial fluid secretion, cell-volume regulation, neuroexcitation, smooth-muscle contraction and acidification of intracellular organelles. Mutations in several chloride channels cause human diseases, including cystic fibrosis, macular degeneration, myotonia, kidney stones, renal salt wasting and hyperekplexia. Chloride-channel modulators have potential applications in the treatment of some of these disorders, as well as in secretory diarrhoeas, polycystic kidney disease, osteoporosis and hypertension. Modulators of GABAA (γ-aminobutyric acid A) receptor chloride channels are in clinical use and several small-molecule chloride-channel modulators are in preclinical development and clinical trials. Here, we discuss the broad opportunities that remain in chloride-channel-based drug discovery. PMID:19153558

  7. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... hydrogen chloride. The pure material occurs as hydroscopic, hexagonal, dark crystals. Ferric chloride... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... Specific Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III)...

  8. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride, FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and hydrogen chloride. The pure... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ferric chloride. 184.1297 Section 184.1297...

  9. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... hydrogen chloride. The pure material occurs as hydroscopic, hexagonal, dark crystals. Ferric chloride... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... Specific Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III)...

  10. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... hydrogen chloride. The pure material occurs as hydroscopic, hexagonal, dark crystals. Ferric chloride... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ferric chloride. 184.1297 Section 184.1297 Food... Specific Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III)...

  11. Benzalkonium Chloride and Glaucoma

    PubMed Central

    Kaufman, Paul L.; Kiland, Julie A.

    2014-01-01

    Abstract Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology. PMID:24205938

  12. Nitrene transfer reactions catalysed by copper(I) complexes in ionic liquid using chloramine-T.

    PubMed

    Cano, Israel; Nicasio, M Carmen; Pérez, Pedro J

    2009-01-28

    The complex [Tpm(*,Br)Cu(NCMe)]BF4 (Tpm(*,Br) = HC(3,5-Me2-4-Br-pyrazolyl)3) catalyses the aziridination of alkenes and the amidation of cyclic ethers with chloramine-T as the nitrene source and the ionic liquid [bmim]PF6 as the reaction medium (bmim = 1-n-butyl-3-methylimidazolium). High conversions have been obtained over several cycles of catalyst recovery and reuse.

  13. Probing structural patterns of ion association and solvation in mixtures of imidazolium ionic liquids with acetonitrile by means of relative (1)H and (13)C NMR chemical shifts.

    PubMed

    Marekha, Bogdan A; Kalugin, Oleg N; Bria, Marc; Idrissi, Abdenacer

    2015-09-21

    Mixtures of ionic liquids (ILs) with polar aprotic solvents in different combinations and under different conditions (concentration, temperature etc.) are used widely in electrochemistry. However, little is known about the key intermolecular interactions in such mixtures depending on the nature of the constituents and mixture composition. In order to systematically address the intermolecular interactions, the chemical shift variation of (1)H and (13)C nuclei has been followed in mixtures of imidazolium ILs 1-n-butyl-3-methylimidazolium tetrafluoroborate (BmimBF4), 1-n-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6), 1-n-butyl-3-methylimidazolium trifluoromethanesulfonate (BmimTfO) and 1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimTFSI) with molecular solvent acetonitrile (AN) over the entire composition range at 300 K. The concept of relative chemical shift variation is proposed to assess the observed effects on a unified and unbiased scale. We have found that hydrogen bonds between the imidazolium ring hydrogen atoms and electronegative atoms of anions are stronger in BmimBF4 and BmimTfO ILs than those in BmimTFSI and BmimPF6. Hydrogen atom at position 2 of the imidazolium ring is substantially more sensitive to interionic hydrogen bonding than those at positions 4-5 in the case of BmimTfO and BmimTFSI ILs. These hydrogen bonds are disrupted upon dilution in AN due to ion dissociation which is more pronounced at high dilutions. Specific solvation interactions between AN molecules and IL cations are poorly manifested.

  14. Reactor-chromatographic determination of vinyl chloride in polyvinyl chloride

    SciTech Connect

    Berezkin, V.G.

    1986-08-01

    The authors carry out a chromatographic study of the volatile products that evolve when various grades of domestic polyvinyl chloride are heated, to determine the concentration of residual monomer. To find vinyl chloride in complex mixtures of air pollutants the authors used sorptive reaction concentration of impurities. This new combination of methods is based on preliminary separation at the sampling stage of impurities that interfere in the analysis, followed by concentration of the desired components in a trap with an adsorbent, and chromatographic determination of the concentrated trace materials. The method obtains low vinyl chloride concentrations (down to 10/sup -4/-10/sup -5/ wt. %) with +/-5 relative error.

  15. Studies Update Vinyl Chloride Hazards.

    ERIC Educational Resources Information Center

    Rawls, Rebecca

    1980-01-01

    Extensive study affirms that vinyl chloride is a potent animal carcinogen. Epidemiological studies show elevated rates of human cancers in association with extended contact with the compound. (Author/RE)

  16. An XAFS study of nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; G Cheek; K Pandya; W OGrady

    2011-12-31

    Nickel chloride was studied with cyclic voltammetry and X-ray absorption spectroscopy in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Acidic melts display metal stripping peaks which are not observed in the basic melt. EXAFS analysis shows that the nickel is tetrahedrally coordinated with chloride ions in the basic solution. In the acidic solution the nickel is coordinated by six chloride ions that are also associated with aluminum ions.

  17. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  18. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg. No. 7447-40-7) is a white... manufacturing practice. Potassium chloride may be used in infant formula in accordance with section 412(g)...

  19. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  20. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  1. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... from the filtrate on cooling. Alternatively, hydrogen chloride formed by the burning of hydrogen in... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS...

  2. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... from the filtrate on cooling. Alternatively, hydrogen chloride formed by the burning of hydrogen in... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS...

  3. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... from the filtrate on cooling. Alternatively, hydrogen chloride formed by the burning of hydrogen in... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS...

  4. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... from the filtrate on cooling. Alternatively, hydrogen chloride formed by the burning of hydrogen in... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS...

  5. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... Alternatively, hydrogen chloride formed by the burning of hydrogen in chlorine is dissolved in water and then... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium chloride. 184.1138 Section 184.1138 Food... GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is...

  6. Regeneration of zinc chloride hydrocracking catalyst

    DOEpatents

    Zielke, Clyde W.

    1979-01-01

    Improved rate of recovery of zinc values from the solids which are carried over by the effluent vapors from the oxidative vapor phase regeneration of spent zinc chloride catalyst is achieved by treatment of the solids with both hydrogen chloride and calcium chloride to selectively and rapidly recover the zinc values as zinc chloride.

  7. 21 CFR 184.1622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium chloride. 184.1622 Section 184.1622 Food... Specific Substances Affirmed as GRAS § 184.1622 Potassium chloride. (a) Potassium chloride (KCl, CAS Reg... levels not to exceed current good manufacturing practice. Potassium chloride may be used in...

  8. CHLORIDE WASHER PERFORMACE TESTING

    SciTech Connect

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  9. 21 CFR 184.1297 - Ferric chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Substances Affirmed as GRAS § 184.1297 Ferric chloride. (a) Ferric chloride (iron (III) chloride, FeC13, CAS Reg. No. 7705-08-0) may be prepared from iron and chlorine or from ferric oxide and hydrogen chloride... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ferric chloride. 184.1297 Section 184.1297 Food...

  10. Worker exposure to vinyl chloride and poly(vinyl chloride).

    PubMed

    Jones, J H

    1981-10-01

    The National Institute for Occupational Safety and Health (NIOSH) in early 1974 began industrial hygiene studies of vinyl chloride exposed workers. Three VC monomer plants, three VC polymerization plants, and seven PVC fabrication plants were surveyed. V polymerization plant workers and workers in one job category in VC monomer plants were exposed to average levels above 1 ppm. The highest average exposure was 22 ppm. NIOSH health hazard evaluation studies since these initial surveys have primarily shown nondetectable levels of vinyl chloride. A NIOSH control technology study in 1977 showed that exposure levels in VC polymerization plants had been drastically reduced but exposure levels above 1 ppm were still found in several cases.

  11. l-Nebiviololinium chloride dihydrate

    PubMed Central

    Tuchalski, Gisbert; Hänsicke, Andre; Reck, Günther; Emmerling, Franziska

    2008-01-01

    The hydro­chloride salt of chiral l-nebivolol {systematic name: (+)−(R,S,S,S)-bis­[2-(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)-2-hydroxy­ethyl]ammonium chloride dihydrate}, C22H26F2NO4 +·Cl−·2H2O, was obtained by chiral liquid chromatography as a dihydrate. The pyran rings adopt half-chair conformations. Hydrogen bonds between the cation, anions and water mol­ecules contribute to the formation of layers parallel to the ac plane. PMID:21200930

  12. Phenoxyethanol absorption by polyvinyl chloride.

    PubMed

    Lee, M G

    1984-12-01

    Phenoxyethanol was found to be absorbed by polyvinyl chloride administration sets during continuous irrigation therapy. Depending upon the conditions of administration up to 20% loss of potency could occur. Absorption of the drug by the rigid plastic luer-lock fitting of the set caused softening and decreased rigidity of the plastic.

  13. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, S.J.; Thomas, T.R.

    1975-11-14

    A method is described for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel, and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  14. Method for the abatement of hydrogen chloride

    DOEpatents

    Winston, Steven J.; Thomas, Thomas R.

    1977-01-01

    The present invention provides a method for reducing the amount of hydrogen chloride contained in a gas stream by reacting the hydrogen chloride with ammonia in the gas phase so as to produce ammonium chloride. The combined gas stream is passed into a condensation and collection vessel and a cyclonic flow is created in the combined gas stream as it passes through the vessel. The temperature of the gas stream is reduced in the vessel to below the condensation temperature of ammonium chloride in order to crystallize the ammonium chloride on the walls of the vessel. The cyclonic flow creates a turbulence which breaks off the larger particles of ammonium chloride which are, in turn, driven to the bottom of the vessel where the solid ammonium chloride can be removed from the vessel. The gas stream exiting from the condensation and collection vessel is further cleaned and additional ammonium chloride is removed by passing through additional filters.

  15. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use....

  16. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  17. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use....

  18. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  19. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  20. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  1. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  2. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use....

  3. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  4. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use....

  5. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  6. 21 CFR 582.5446 - Manganese chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  7. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  8. 21 CFR 582.5252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use....

  9. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1446 Manganese chloride. (a) Manganese chloride (MnCl2, CAS Reg. No. 7773-01-5) is a pink... manganous oxide, pyrolusite ore (MnO2), or reduced manganese ore in hydrochloric acid. The...

  10. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Specific Substances Affirmed as GRAS § 184.1446 Manganese chloride. (a) Manganese chloride (MnCl2, CAS Reg.... It is prepared by dissolving manganous oxide, pyrolusite ore (MnO2), or reduced manganese ore...

  11. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Specific Substances Affirmed as GRAS § 184.1446 Manganese chloride. (a) Manganese chloride (MnCl2, CAS Reg.... It is prepared by dissolving manganous oxide, pyrolusite ore (MnO2), or reduced manganese ore...

  12. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  13. Microbial reductive dehalogenation of vinyl chloride

    DOEpatents

    Spormann, Alfred M.; Muller, Jochen A.; Rosner, Bettina M.; Von Abendroth, Gregory; Meshulam-Simon, Galit; McCarty, Perry L

    2011-11-22

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  14. 21 CFR 184.1193 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Calcium chloride. 184.1193 Section 184.1193 Food... Specific Substances Affirmed as GRAS § 184.1193 Calcium chloride. (a) Calcium chloride (CaCl2·2H2O, CAS Reg. No. 10035-04-8) or anhydrous calcium chloride (CaCl2, CAS Reg. No. 10043-52-4) may be...

  15. 21 CFR 184.1193 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Calcium chloride. 184.1193 Section 184.1193 Food... Specific Substances Affirmed as GRAS § 184.1193 Calcium chloride. (a) Calcium chloride (CaCl2·2H2O, CAS Reg. No. 10035-04-8) or anhydrous calcium chloride (CaCl2, CAS Reg. No. 10043-52-4) may be...

  16. 21 CFR 184.1193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Calcium chloride. 184.1193 Section 184.1193 Food... Specific Substances Affirmed as GRAS § 184.1193 Calcium chloride. (a) Calcium chloride (CaCl2·2H2O, CAS Reg. No. 10035-04-8) or anhydrous calcium chloride (CaCl2, CAS Reg. No. 10043-52-4) may be...

  17. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  18. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  19. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b)...

  20. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  1. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  2. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  3. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  4. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Choline chloride. 182.8252 Section 182.8252 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use. This substance is generally recognized...

  5. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Choline chloride. 182.8252 Section 182.8252 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252 Choline chloride. (a) Product. Choline chloride. (b) Conditions of use. This substance is generally recognized...

  6. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for color... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  7. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252 Choline chloride. (a) Product. Choline chloride....

  8. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... 1 § 582.5985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance...

  9. 21 CFR 182.8985 - Zinc chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Zinc chloride. 182.8985 Section 182.8985 Food and... CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8985 Zinc chloride. (a) Product. Zinc chloride. (b) Conditions of use. This substance is generally recognized as safe when used...

  10. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  11. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  12. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  13. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  14. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  15. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  16. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  17. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  18. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  19. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  20. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  1. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  2. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  3. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  4. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  5. 7 CFR 58.434 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Calcium chloride. 58.434 Section 58.434 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Material § 58.434 Calcium chloride. Calcium chloride, when used, shall meet the requirements of the...

  6. 21 CFR 582.6193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium chloride. 582.6193 Section 582.6193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This substance is...

  7. 21 CFR 582.1193 - Calcium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium chloride. 582.1193 Section 582.1193 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1193 Calcium chloride. (a) Product. Calcium chloride. (b) Conditions of use. This...

  8. 21 CFR 582.5622 - Potassium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Potassium chloride. 582.5622 Section 582.5622 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5622 Potassium chloride. (a) Product. Potassium chloride. (b) Conditions of use....

  9. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Schulz, W.W.

    1959-08-01

    The removal of chlorides from aqueons solutions is described. The process involves contacting the aqueous chloride containing solution with a benzene solution about 0.005 M in phenyl mercuric acetate whereby the chloride anions are taken up by the organic phase and separating the organic phase from the aqueous solutions.

  10. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  11. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  12. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  13. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Food Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  14. An XAFS Study of Tantalum Chloride in the Ionic Liquid 1-ethyl-3-methyl Imidazolium Chloride/ aluminum Chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Tantalum chloride was studied with extended X-ray absorption fine structure spectroscopy (XAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride ionic liquids (ILs). Anhydrous Ta2Cl10 is more soluble in the basic solution than in the acidic solution and the X-ray absorption data shows that the coordination shell of chlorides around the tantalum is larger in the basic solution. In the acidic solution, tantalum has five chlorides in its coordination shell while in the basic solution; the tantalum is coordinated by seven chlorides. This indicates that the Lewis acidity of the tantalum chloride causes the Ta to coordinate differently in the acidic and the basic solutions.

  15. Chloride flux out of Yellowstone National Park

    USGS Publications Warehouse

    Norton, D.R.; Friedman, I.

    1985-01-01

    Monitoring of the chloride concentration, electrical conductivity, and discharge was carried out for the four major rivers of Yellowstone National Park from September 1982 to January 1984. Chloride flux out of the Park was determined from the measured values of chloride concentration and discharge. The annual chloride flux from the Park was 5.86 ?? 1010 g. Of this amount 45% was from the Madison River drainage basin, 32% from the Yellowstone River basin, 12% from the Snake River basin, and 11% from the Falls River basin. Of the annual chloride flux from the Yellowstone River drainage basin 36% was attributed to the Yellowstone Lake drainage basin. The geothermal contribution to the chloride flux was determined by subtracting the chloride contribution from rock weathering and atmospheric precipitation and is 94% of the total chloride flux. Calculations of the geothermal chloride flux for each river are given and the implications of an additional chloride flux out of the western Park boundary discussed. An anomalous increase in chloride flux out of the Park was observed for several weeks prior to the Mt. Borah earthquake in Central Idaho on October 28, 1983, reaching a peak value shortly thereafter. It is suggested that the rise in flux was a precursor of the earthquake. The information in this paper provides baseline data against which future changes in the hydrothermal systems can be measured. It also provides measurements related to the thermal contributions from the different drainage basins of the Park. ?? 1985.

  16. Salt, chloride, bleach, and innate host defense.

    PubMed

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense.

  17. Salt, chloride, bleach, and innate host defense

    PubMed Central

    Wang, Guoshun; Nauseef, William M.

    2015-01-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  18. Salt, chloride, bleach, and innate host defense.

    PubMed

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  19. Chloride Transporting CLC Proteins1

    NASA Astrophysics Data System (ADS)

    Pusch, Michael

    In the early 1980s, Chris Miller and colleagues described a curious "double-barreled" chloride channel from the electric organ of Torpedo fish reconstituted in planar lipid bilayers (Miller and White, 1980). Single-channel openings occurred in "bursts" separated by long closures. A single burst was characterized by the presence of two open conductance levels of equal size and the gating (i.e., openings and closings) during a burst could be almost perfectly described as a superposition of two identical and independent conductances that switched between open and closed states with voltage-dependent rates α and β (Hanke and Miller, 1983) (Fig. 8.1).

  20. An XAFS Study of Niobium chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride/ aluminum chloride

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    Niobium chloride was studied with extended X-ray absorption fine structure spectroscopy (EXAFS) in acidic and basic aluminum chloride/1-ethyl-3-methyl imidazolium chloride (EMIC) ionic liquids. Although anhydrous Nb2Cl10 is more soluble in the basic melt than in the acidic melt, the EXAFS data shows that the coordination shell around the niobium does not change in the different ionic liquids. Both the acidic and basic melts show a coordination of five chlorides in the first shell. This indicates that in this series of ionic liquids, the Nb2Cl10 breaks up into two NbCl5 entities in both the acidic and the basic melts.

  1. Production of anhydrous aluminum chloride composition

    DOEpatents

    Vandergrift, G.F. III; Krumpelt, M.; Horwitz, E.P.

    1981-10-08

    A process is described for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

  2. [Sodium chloride 0.9%: nephrotoxic crystalloid?].

    PubMed

    Dombre, Vincent; De Seigneux, Sophie; Schiffer, Eduardo

    2016-02-01

    Sodium chloride 0.9%, often incorrectly called physiological saline, contains higher concentration of chloride compared to plasma. It is known that the administration of sodium chloride 0.9% can cause hyperchloremic metabolic acidosis in a reproducible manner. The elevated chloride concentration in 0.9% NaCl solution can also adversely affect renal perfusion. This effect is thought to be induced by hyperchloremia that causes renal artery vasoconstriction. For these reasons, the use of 0.9% NaCl solution is raising attention and some would advocate the use of a more "physiological" solution, such as balanced solutions that contain a level of chloride closer to that of plasma. Few prospective, randomized, controlled trials are available today and most were done in a perioperative setting. Some studies suggest that the chloride excess in 0.9% NaCl solution could have clinical consequences; however, this remains to be established by quality randomized controlled trials. PMID:26999998

  3. [Sodium chloride 0.9%: nephrotoxic crystalloid?].

    PubMed

    Dombre, Vincent; De Seigneux, Sophie; Schiffer, Eduardo

    2016-02-01

    Sodium chloride 0.9%, often incorrectly called physiological saline, contains higher concentration of chloride compared to plasma. It is known that the administration of sodium chloride 0.9% can cause hyperchloremic metabolic acidosis in a reproducible manner. The elevated chloride concentration in 0.9% NaCl solution can also adversely affect renal perfusion. This effect is thought to be induced by hyperchloremia that causes renal artery vasoconstriction. For these reasons, the use of 0.9% NaCl solution is raising attention and some would advocate the use of a more "physiological" solution, such as balanced solutions that contain a level of chloride closer to that of plasma. Few prospective, randomized, controlled trials are available today and most were done in a perioperative setting. Some studies suggest that the chloride excess in 0.9% NaCl solution could have clinical consequences; however, this remains to be established by quality randomized controlled trials.

  4. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS Reg. No. 7786-30-3) is a... prepared by dissolving magnesium oxide, hydroxide, or carbonate in aqueous hydrochloric acid solution...

  5. Metal chloride cathode for a battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Bankston, C. Perry (Inventor)

    1991-01-01

    A method of fabricating a rechargeable battery is disclosed which includes a positive electrode which contains a chloride of a selected metal when the electrode is in its active state. The improvement comprises fabricating the positive electrode by: providing a porous matrix composed of a metal; providing a solution of the chloride of the selected metal; and impregnating the matrix with the chloride from the solution.

  6. Irreversible gettering of thionyl chloride

    SciTech Connect

    LeRoy Whinnery; Steve Goods; George Buffleben; Tim Sheppodd

    1999-11-01

    The authors have successfully demonstrated the irreversible gettering of SOCl{sub 2} by ZnO/ASZMTEDA carbon over a modest temperature range. While thionyl chloride decomposition was slow below {minus}20 C, lower temperatures are expected to be less of a problem than at higher temperatures. The approximately 30 cc of thionyl chloride in a typical D-cell would require 50 g of ZnO and 107 g of ASZMTEDA carbon. Fortunately, since it is unlikely to happen at all, it is common practice to assume only one cell will fail (leak) in a given battery pack. So, one charge of getter can protect the whole battery pack. In summary, ZnO/ASZMTEDA carbon fulfills all of the requirements of an ideal getter including: irreversible binding or reaction with SOCl{sub 2}, high volumetric uptake capacity, high efficiency, non-volatile, air stable, insensitive to poisoning, non-toxic, cheap, non-corrosive, and the gettering product is not a liquid or oil that could block further flow or accessibility. Future work in this area includes incorporation of the ZnO and carbon into a structural open-celled porous monolith, as well as, gettering for other types of batteries (e.g., Li/MnO{sub 2}).

  7. Enrofloxacin hydro-chloride dihydrate.

    PubMed

    Miranda-Calderón, Jorge E; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-04-01

    The asymmetric unit of the title compound, C19H23FN3O3 (+)·Cl(-)·2H2O [systematic name: 4-(3-carb-oxy-1-cyclo-propyl-6-fluoro-4-oxo-1,4-di-hydro-quin-o-lin-7-yl)-1-ethyl-piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol-ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo-propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra-molecular O-H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O-H⋯Cl, N-H⋯Cl and O-H⋯O hydrogen bonds, and a π-π inter-action between the benzene rings [centroid-centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array.

  8. Arsenic removal by ferric chloride

    SciTech Connect

    Hering, J.G.; Chen, P.Y.; Wilkie, J.A.; Elimelech, M.; Liang, S.

    1996-04-01

    Bench-scale studies were conducted in model freshwater systems to investigate how various parameters affected arsenic removal during coagulation with ferric chloride and arsenic adsorption onto preformed hydrous ferric oxide. Parameters included arsenic oxidation state and initial concentration, coagulant dosage or adsorbent concentration, pH, and the presence of co-occurring inorganic solutes. Comparison of coagulation and adsorption experiments and of experimental results with predictions based on surface complexation modeling demonstrated that adsorption is an important (though not the sole) mechanism governing arsenic removal during coagulation. Under comparable conditions, better removal was observed with arsenic(V) [As(V)] than with arsenic(III) [As(III)] in both coagulation and adsorption experiments. Below neutral pH values, As(III) removal-adsorption was significantly decreased in the presence of sulfate, whereas only a slight decrease in As(V) removal-adsorption was observed. At high pH, removal-adsorption of As(V) was increased in the presence of calcium. Removal of As(V) during coagulation with ferric chloride is both more efficient and less sensitive than that of As(III) to variations in source water composition.

  9. Production of chlorine from chloride salts

    DOEpatents

    Rohrmann, Charles A.

    1981-01-01

    A process for converting chloride salts and sulfuric acid to sulfate salts and elemental chlorine is disclosed. A chloride salt and sulfuric acid are combined in a furnace where they react to produce a sulfate salt and hydrogen chloride. Hydrogen chloride from the furnace contacts a molten salt mixture containing an oxygen compound of vanadium, an alkali metal sulfate and an alkali metal pyrosulfate to recover elemental chlorine. In the absence of an oxygen-bearing gas during the contacting, the vanadium is reduced, but is regenerated to its active higher valence state by separately contacting the molten salt mixture with an oxygen-bearing gas.

  10. Fabrication Of Metal Chloride Cathodes By Sintering

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Di Stefano, Salvador; Bankston, C. Perry

    1992-01-01

    Transition-metal chloride cathodes for use in high-temperature rechargeable sodium batteries prepared by sintering transition-metal powders mixed with sodium chloride. Need for difficult and dangerous chlorination process eliminated. Proportions of transition metal and sodium chloride in mixture adjusted to suit specific requirements. Cathodes integral to sodium/metal-chloride batteries, which have advantages over sodium/sulfur batteries including energy densities, increased safety, reduced material and thermal-management problems, and ease of operation and assembly. Being evaluated for supplying electrical power during peak demand and electric vehicles.

  11. XAFS Studies of Ni Ta and Nb Chlorides in the Ionic Liquid 1-Ethyl-3-Methyl Imidazolium Chloride / Aluminum Chloride

    SciTech Connect

    W OGrady; D Roeper; K Pandya; G Cheek

    2011-12-31

    The structures of anhydrous nickel, niobium, and tantalum chlorides have been investigated in situ in acidic and basic ionic liquids (ILs) of 1-methyl-3-ethylimidazolium chloride (EMIC)/AlCl{sub 3} with X-ray absorption spectroscopy (XAS). The coordination of NiCl{sub 2} changes from tetrahedral in basic solution to octahedral in acidic solution. The NiCl{sub 2} is a strong Lewis acid in that it can induce the AlCl{sub 3} to share its chlorides in the highly acidic IL, forming a structure with six near Cl{sup -} ions and eight further distant Al ions which share the chloride ions surrounding the Ni{sup 2+}. When Nb{sub 2}Cl{sub 10}, a dimer, is added to the acidic or basic solution, the dimer breaks apart and forms two species. In the acid solution, two trigonal bipyramids are formed with five equal chloride distances, while in the basic solution, a square pyramid with four chlorides forming a square base and one shorter axial chloride bond. Ta{sub 2}Cl{sub 10} is also a dimer and divides into half in the acidic solution and forms two trigonal bipyramids. In the basic solution, the dimer breaks apart but the species formed is sufficiently acidic that it attracts two additional chloride ions and forms a seven coordinated tantalum species.

  12. Chloride substitution in sodium borohydride

    SciTech Connect

    Ravnsbaek, Dorthe B.; Rude, Line H.; Jensen, Torben R.

    2011-07-15

    The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH{sub 4}, forming Na(BH{sub 4}){sub 0.9}Cl{sub 0.1}, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH{sub 4} is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH{sub 4}){sub 0.43}Cl{sub 0.57}. In addition, annealing results in dissolution of 10-20 mol% NaBH{sub 4} into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements. - Graphical Abstract: Dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH{sub 4}){sub 1-x}Cl{sub x} is studied. Dissolution is facilitated by two methods: ball milling or annealing at 300 deg. C for three days of NaBH{sub 4}-NaCl samples. Sample compositions and dissolution mechanism are studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction data. Highlights: > Studies of dissolution of sodium chloride and sodium borohydride into each other. > Solid state diffusion facilitated by mechanical and thermal treatments. > Dissolution is more efficiently induced by heating than by mechanical treatment. > Mechanism for dissolution studied by Rietveld refinement of in situ SR-PXD data.

  13. Chloride Analysis of RFSA Second Campaign Dissolver Solution

    SciTech Connect

    Holcomb, H.P.

    2001-05-17

    The dissolver solution from the second RFSA campaign was analyzed for chloride using the recently-developed turbidimetric method. Prior to chloride removal in head end, the solution contained 1625 ppm chloride. After chloride removal with Hg(I) and prior to feeding to solvent extraction, the solution contained only 75 ppm chloride. This report discusses those analysis results.

  14. Sodium-metal chloride batteries

    NASA Technical Reports Server (NTRS)

    Ratnakumar, B. V.; Attia, A. I.; Halpert, G.

    1992-01-01

    It was concluded that rapid development in the technology of sodium metal chloride batteries has been achieved in the last decade mainly due to the: expertise available with sodium sulfur system; safety; and flexibility in design and fabrication. Long cycle lives of over 1000 and high energy densities of approx. 100 Wh/kg have been demonstrated in both Na/FeCl2 and Na/NiCl2 cells. Optimization of porous cathode and solid electrolyte geometries are essential for further enhancing the battery performance. Fundamental studies confirm the capabilities of these systems. Nickel dichloride emerges as the candidate cathode material for high power density applications such as electric vehicle and space.

  15. Process for synthesis of beryllium chloride dietherate

    DOEpatents

    Bergeron, Charles; Bullard, John E.; Morgan, Evan

    1991-01-01

    A low temperature method of producing beryllium chloride dietherate through the addition of hydrogen chloride gas to a mixture of beryllium metal in ether in a reaction vessel is described. A reflux condenser provides an exit for hydrogen produced form the reaction. A distillation condenser later replaces the reflux condenser for purifying the resultant product.

  16. 75 FR 19657 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-15

    ... Commission found that the domestic interested party group response to its notice of institution (74 FR 31757... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of... chloride from China. SUMMARY: The Commission hereby gives notice that it will proceed with a full...

  17. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Specific Substances Affirmed as GRAS § 184.1446 Manganese chloride. (a) Manganese chloride (MnCl2·4H2O, CAS... dichloride. It is prepared by dissolving manganous oxide, pyrolusite ore (MnO2), or reduced manganese ore...

  18. 21 CFR 184.1446 - Manganese chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Specific Substances Affirmed as GRAS § 184.1446 Manganese chloride. (a) Manganese chloride (MnCl2·4H2O, CAS... dichloride. It is prepared by dissolving manganous oxide, pyrolusite ore (MnO2), or reduced manganese ore...

  19. Hydrocracking with molten zinc chloride catalyst containing 2-12% ferrous chloride

    DOEpatents

    Zielke, Clyde W.; Bagshaw, Gary H.

    1981-01-01

    In a process for hydrocracking heavy aromatic polynuclear carbonaceous feedstocks to produce hydrocarbon fuels boiling below about 475.degree. C. by contacting the feedstocks with hydrogen in the presence of a molten zinc chloride catalyst and thereafter separating at least a major portion of the hydrocarbon fuels from the spent molten zinc chloride catalyst, an improvement comprising: adjusting the FeCl.sub.2 content of the molten zinc chloride to from about 2 to about 12 mol percent based on the mixture of ferrous chloride and molten zinc chloride.

  20. Chloride transport in the cystic fibrosis enterocyte.

    PubMed

    Bijman, J; Veeze, H; Kansen, M; Tilly, B; Scholte, B; Hoogeveen, A; Halley, D; Sinaasappel, M; de Jonge, H

    1991-01-01

    Molecular mechanisms of intestinal chloride channel regulation and potential abnormalities in electrogenic chloride secretion in intestinal epithelium from cystic fibrosis (CF) patients were investigated by a combination of Ussing chamber, vesicle transport and off-cell patch-clamp analysis. Short circuit current (Isc) measurements in normal and CF rectal biopsies provided evidence for i) a defect in the cAMP-provoked activation of chloride secretion and a (hyper)expression of cAMP-dependent potassium secretion in all CF patients examined (n = 11); ii) a defect in the carbachol-provoked chloride secretion and a (hyper)expression of carbachol-induced potassium secretion in 6/11 patients; iii) a residual (but still impaired) carbachol-induced chloride secretion in 5/11 CF patients (including 2 sibs). The latter class of CF patients appeared to consist genetically of compound heterozygotes for the major delta-F508 deletion, suggesting a correlation between the nature of the mutation in the CF gene and the severity of the chloride secretory defect in CF intestine. In our search for a regulatory function of GTP-binding (G-) proteins detected previously in the luminal membrane of rat and human intestinal epithelial cells, evidence was found for the presence of a GTP[S]-activatable- and GDP[S]-inhibitable chloride conductance in the apical membrane of rat enterocytes and human colonocytes. In excised patches of human colonocyt membranes, this G-proteine-sensitive chloride conductance was identified further as a novel type of chloride channel (20pS; inwardly rectifying) that was different from the 33pS outwardly rectifying chloride channel activatable by cAMP-dependent proteinkinase (PK-A) and voltage depolarization.(ABSTRACT TRUNCATED AT 250 WORDS)

  1. Factors influencing electrochemical removal of chloride from concrete

    SciTech Connect

    Arya, C.; Sa`id-Shawqi, Q.; Vassie, P.R.W.

    1996-06-01

    Electrochemical chloride removal was studied using prisms made from concrete containing various levels of chlorides derived from sodium chloride added during mixing. The amount of chloride removed during the treatment was assessed by analyzing the anolyte. Chloride removal increased with increasing applied potential, number of reinforcing bars at a particular depth and initial chloride content of the concrete. A greater percentage of chloride was removed from prisms where the thickness of the chloride bearing layer of concrete was less than the depth of cover to the reinforcement. Where the thickness of the chloride bearing layer exceeded the cover to the reinforcement, the use of an external cathode significantly increased the total amount of chloride removed. Chloride removal from a face remote from the source of the chloride contamination (soffit desalination) was shown to be feasible.

  2. Embedded chloride detectors for roadways and bridges

    NASA Astrophysics Data System (ADS)

    Fuhr, Peter L.; Huston, Dryver R.; McPadden, Adam P.; Cauley, Robert F.

    1996-04-01

    The problems associated with the application of chloride-based deicing agents to roadways and specifically bridges include chemical pollution and accelerated corrosion of strength members (especially rebar) within the structure. In many instances, local ordinances are attempting to force state agencies to reduce, if not eliminate, the use of these chlorides (typically at the cost of increased driving hazards). With respect to the corrosion aspects of chloride application, cracks that occur in the roadway/bridge pavement allow water to seep into the pavement carrying the chloride to the rebar with the resultant increase in corrosion. In response to this problem, particularly in high roadsalt usage areas, a chloride/water impermeable membrane is placed above the rebar matrix so if/when roadway cracking occurs, the roadsalts won't be able to damage the rebar. Such a membrane is costly -- and the question of its in-service performance is questionable. In a joint effort between the University of Vermont and the Vermont Agency of Transportation, we are developing fiber optic chloride detectors which are capable of being embedded into the rebar-concrete roadway under this membrane. The sensing mechanism relies on spectroscopic analysis of a chemical reaction of chloride and reagents (which have been coated onto the ends of fibers). Laboratory results of these detectors and a usable system configuration are presented.

  3. Materials for Conoco zinc chloride hydrocracking process

    SciTech Connect

    Baylor, V.B.; Keiser, J.R.; DeVan, J.H.

    1980-01-01

    Use of zinc chloride to augment hydrogenation of coal and yield a high-octane gasoline product is the most significant feature of a coal liquefaction process being developed by Conoco Coal Development Company. The zinc chloride catalyst is regenerated in a fluidized sand bed, where the spent melt is mixed with air and hydrogen chloride at about 1000/sup 0/C. Recovery is completed at 370/sup 0/C in a condenser, where the zinc chloride is collected and the oxygen and sulfur are separated as H/sub 2/O and SO/sub 2/. The economic viability of the entire process is highly dependent on almost complete recovery of the zinc chloride. The severe environmental conditions of this recovery process cause unique materials problems. Although high-temperature oxidation and sulfidation are being studied in related programs, suitable materials to resist their combined effects along with those of chlorides have not yet been specifically addressed. Common engineering materials, such as the austenitic stainless steels and many nickel-base alloys, are unsuitable because of their inability to tolerate the elevated temperatures and sulfidation, respectively. The objectives of this task are to screen various metallic and ceramic materials for resistance to the zinc chloride recovery system environment and to determine the nature of the attack by exposing coupons to the simulated environment in the laboratory.

  4. Phenomics of Cardiac Chloride Channels

    PubMed Central

    Duan, Dayue Darrel

    2014-01-01

    Forward genetic studies have identified several chloride (Cl−) channel genes, including CFTR, ClC-2, ClC-3, CLCA, Bestrophin, and Ano1, in the heart. Recent reverse genetic studies using gene targeting and transgenic techniques to delineate the functional role of cardiac Cl− channels have shown that Cl− channels may contribute to cardiac arrhythmogenesis, myocardial hypertrophy and heart failure, and cardioprotection against ischemia reperfusion. The study of physiological or pathophysiological phenotypes of cardiac Cl− channels, however, is complicated by the compensatory changes in the animals in response to the targeted genetic manipulation. Alternatively, tissue-specific conditional or inducible knockout or knockin animal models may be more valuable in the phenotypic studies of specific Cl− channels by limiting the effect of compensation on the phenotype. The integrated function of Cl− channels may involve multiprotein complexes of the Cl− channel subproteome. Similar phenotypes can be attained from alternative protein pathways within cellular networks, which are influenced by genetic and environmental factors. The phenomics approach, which characterizes phenotypes as a whole phenome and systematically studies the molecular changes that give rise to particular phenotypes achieved by modifying the genotype under the scope of genome/proteome/phenome, may provide more complete understanding of the integrated function of each cardiac Cl− channel in the context of health and disease. PMID:23720326

  5. Binary Nucleation of Water and Sodium Chloride

    SciTech Connect

    Nemec, Thomas; Marsik, Frantisek; Palmer, Donald

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  6. Vinyl chloride-associated liver disease.

    PubMed

    Berk, P D; Martin, J F; Young, R S; Creech, J; Selikoff, I J; Falk, H; Watanabe, P; Popper, H; Thomas, L

    1976-06-01

    Although polyvinyl chloride has been produced from vinyl chlride monomer for more than 40 years, recognition of toxicity among vinyl chloride polymerization workers is more recent. In the mid 1960s, workers involved in cleaning polymerization tanks were found to have acro-osteolysis. In 1974, the same population of workers was found to be at risk for an unusual type of hepatic fibrosis and angiosarcoma of the liver. We describe two cases of vinyl chloride-associated liver injury, one of hepatic fibrosis and one of angiosarcoma. Histologic features of these lesions are similar to the hepatic fibrosis and angiosarcomas resulting from chronic exposure to inorganic arsenicals. Preliminary studies suggest that the toxicity of vinyl chloride may result from formation, during high-dose exposure, of active metabolites by mixed function oxidases of the liver. Epidemiologic studies indicate an increased incidence not only of liver disease, but also of cancers of the brain, lung, and possibly other organs.

  7. Catastrophic event modeling. [lithium thionyl chloride batteries

    NASA Technical Reports Server (NTRS)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  8. Lithium thionyl chloride high rate discharge

    NASA Technical Reports Server (NTRS)

    Klinedinst, K. A.

    1980-01-01

    Improvements in high rate lithium thionyl chloride power technology achieved by varying the electrolyte composition, operating temperature, cathode design, and cathode composition are discussed. Discharge capacities are plotted as a function of current density, cell voltage, and temperature.

  9. Crystal structure of 4-carbamoylpyridinium chloride.

    PubMed

    Fellows, Simon M; Prior, Timothy J

    2016-04-01

    The hydro-chloride salt of isonicotinamide, C6H7N2O(+)·Cl(-), has been synthesized from a dilute solution of hydro-chloric acid in aceto-nitrile. The compound displays monoclinic symmetry (space group C2/c) at 150 K, similar to the related hydro-chloride salt of nicotinamide. The asymmetric unit contains one protonated isonicotinamide mol-ecule and a chloride anion. An array of hydrogen-bonding inter-actions, including a peculiar bifurcated pyridinium-chloride inter-action, results in linear chains running almost perpendicularly in the [150] and [1-50] directions within the structure. A description of the hydrogen-bonding network and comparison with similar compounds are presented. PMID:27375858

  10. Crystal structure of 4-carbamoylpyridinium chloride

    PubMed Central

    Fellows, Simon M.; Prior, Timothy J.

    2016-01-01

    The hydro­chloride salt of isonicotinamide, C6H7N2O+·Cl−, has been synthesized from a dilute solution of hydro­chloric acid in aceto­nitrile. The compound displays monoclinic symmetry (space group C2/c) at 150 K, similar to the related hydro­chloride salt of nicotinamide. The asymmetric unit contains one protonated isonicotinamide mol­ecule and a chloride anion. An array of hydrogen-bonding inter­actions, including a peculiar bifurcated pyridinium–chloride inter­action, results in linear chains running almost perpendicularly in the [150] and [1-50] directions within the structure. A description of the hydrogen-bonding network and comparison with similar compounds are presented. PMID:27375858

  11. Qualitative Determination of Nitrate with Triphenylbenzylphosphonium Chloride.

    ERIC Educational Resources Information Center

    Berry, Donna A.; Cole, Jerry J.

    1984-01-01

    Discusses two procedures for the identification of nitrate, the standard test ("Brown Ring" test) and a new procedure using triphenylbenzylphosphonium chloride (TPBPC). Effectiveness of both procedures is compared, with the TPBPC test proving to be more sensitive and accurate. (JM)

  12. The 5-(4-Ethynylophenoxy) isophthalic chloride

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M.; Jensen, B. J. (Inventor)

    1986-01-01

    Sulfone-ester polymers containing pendent ethynyl groups and a direct and multistep process for preparing them are disclosed. The multistep process involves the conversion of a pendent bromo group to the ethynyl group while the direct route involves reating hydroxy-terminated sulfone oligomer or polymers with a stoichiometric amount of 5-(4-ethynylphenoxy) isophthaloyl chloride. The 5-(4-ethynylphenoxy) isophthaloyl chloride and the process for preparing it are also disclosed.

  13. Copper chloride cathode for a secondary battery

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Nagasubramanian, Ganesan (Inventor); Bankston, Clyde P. (Inventor)

    1990-01-01

    Higher energy and power densities are achieved in a secondary battery based on molten sodium and a solid, ceramic separator such as a beta alumina and a molten catholyte such as sodium tetrachloroaluminate and a copper chloride cathode. The higher cell voltage of copper chloride provides higher energy densities and the higher power density results from increased conductivity resulting from formation of copper as discharge proceeds.

  14. Structure of complexes between aluminum chloride and other chlorides, 2: Alkali-(chloroaluminates). Gaseous complexes

    NASA Technical Reports Server (NTRS)

    Hargittai, M.

    1980-01-01

    The structural chemistry of complexes between aluminum chloride and other metal chlorides is important both for practice and theory. Condensed-phase as well as vapor-phase complexes are of interest. Structural information on such complexes is reviewed. The first emphasis is given to the molten state because of its practical importance. Aluminum chloride forms volatile complexes with other metal chlorides and these vapor-phase complexes are dealt with in the second part. Finally, the variations in molecular shape and geometrical parameters are summarized.

  15. Membrane potential, chloride exchange, and chloride conductance in Ehrlich mouse ascites tumour cells.

    PubMed

    Hoffmann, E K; Simonsen, L O; Sjøholm, C

    1979-11-01

    1. The steady-state tracer exchange flux of chloride was measured at 10-150 mM external chloride concentration, substituting either lactate or sucrose for chloride. The chloride flux saturates in both cases with a K 1/2 about 50 and 15 mM, respectively. 2. The inhibitory effect of other monovalent anions on the chloride transport was investigated by measuring the 36Cl- efflux into media where either bromide, nitrate, or thiocyanate had been substituted for part of the chloride. The sequence of increasing affinity for the chloride transport system was found to be: Br- less than Cl- less than SCN- = NO3-. 3. The chloride steady-state exchange flux in the presence of nitrate can be described by Michaelis-Menten kinetics with nitrate as a competitive inhibitor of the chloride flux. 4. The apparent activation energy (EA) was determined to be 67 +/- 6.2 kJ/mole, and was constant between 7 and 38 degrees C. 5. The membrane potential (Vm) was measured as a function of the concentration of external K+, substituting K+ for Na+. The transference number of K+ (tK) was estimated from the slope of Vm vs. log10 (K+)e, and tCl and tNa were calculated, neglecting current carried by ions other than Cl-, K+, and Na+. The diffusional net flux of K+ was calculated from the steady-state exchange flux of 42K+, assuming the flux ratio equation to be valid. From this value the K+ conductance and the Na+ and Cl- conductances were calculated. The experiments showed that GCl, GNa, and GK are all about 14 muS/cm2. 6. The net (conductive) chloride permeability derived from the chloride conductance was 4 x 10(-8) cm/sec compared with the apparent permeability of 6 x 10(-7) cm/sec as calculated from the chloride tracer exchange flux. These data suggest that about 95% of the chloride transport is mediated by an electrically silent exchange diffusion. 7. Comparable effects of phloretin (0.25 mM) on the net (conductive) permeability and the apparent permeability to chloride (about 80% inhibition

  16. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  17. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1) is the chloride salt of metallic tin that contains...

  18. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-0969-091) is the chloride salt of metallic tin that contains...

  19. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-69-1) is the chloride salt of metallic tin that contains...

  20. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... Anhydrous stannous chloride (SnCl2, CAS Reg. No. 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either chlorine or gaseous tin tetrachloride. Dihydrated stannous chloride (SnCl2·2H2O, CAS Reg. No. 10025-0969-091) is the chloride salt of metallic tin that contains...

  1. 21 CFR 178.3290 - Chromic chloride complexes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  2. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  3. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  4. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  5. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17... Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride, refrigerated... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  6. Maturation of rat proximal tubule chloride permeability.

    PubMed

    Baum, Michel; Quigley, Raymond

    2005-12-01

    We have previously shown that neonate rabbit tubules have a lower chloride permeability but comparable mannitol permeability compared with adult proximal tubules. The surprising finding of lower chloride permeability in neonate proximals compared with adults impacts net chloride transport in this segment, which reabsorbs 60% of the filtered chloride in adults. However, this maturational difference in chloride permeability may not be applicable to other species. The present in vitro microperfusion study directly examined the chloride and mannitol permeability using in vitro perfused rat proximal tubules during postnatal maturation. Whereas there was no maturational change in mannitol permeability, chloride permeability was 6.3 +/- 1.3 x 10(-5) cm/s in neonate rat proximal convoluted tubule and 16.1 +/- 2.3 x 10(-5) cm/s in adult rat proximal convoluted tubule (P < 0.01). There was also a maturational increase in chloride permeability in the rat proximal straight tubule (5.1 +/- 0.6 x 10(-5) cm/s vs. 9.3 +/- 0.6 x 10(-5) cm/s, P < 0.01). There was no maturational change in bicarbonate-to-chloride permeabilities (P(HCO3)/P(Cl)) in the rat proximal straight tubules (PST) and proximal convoluted tubules (PCT) or in the sodium-to-chloride permeability (P(Na)/P(Cl)) in the proximal straight tubule; however, there was a significant maturational decrease in proximal convoluted tubule P(Na)/P(Cl) with postnatal development (1.31 +/- 0.12 in neonates vs. 0.75 +/- 0.06 in adults, P < 0.001). There was no difference in the transepithelial resistance measured by current injection and cable analysis in the PCT, but there was a maturational decrease in the PST (7.2 +/- 0.8 vs. 4.6 +/- 0.1 ohms x cm2, P < 0.05). These studies demonstrate there are maturational changes in the rat paracellular pathway that impact net NaCl transport during development. PMID:16051720

  7. Atmospheric chloride: Its implication for foliar uptake and damage

    NASA Astrophysics Data System (ADS)

    McWilliams, E. L.; Sealy, R. L.

    Atmospheric chloride is inversely related to distance from the Texas coast; r2 = 0.86. Levels of atmospheric chloride are higher in the early summer than in the winter because of salt storms. Leaf chloride l'evels of Tillandsia usneoides L. (Spanish moss) reflect the atmospheric chloride levels; r2 = 0.78. The importance of considering the effect of atmospheric chloride on leaf damage to horticultural crops is discussed.

  8. Thermoluminescence of ultra-high dilutions of lithium chloride and sodium chloride

    NASA Astrophysics Data System (ADS)

    Rey, Louis

    2003-05-01

    Ultra-high dilutions of lithium chloride and sodium chloride (10 -30 g cm -3) have been irradiated by X- and γ-rays at 77 K, then progressively rewarmed to room temperature. During that phase, their thermoluminescence has been studied and it was found that, despite their dilution beyond the Avogadro number, the emitted light was specific of the original salts dissolved initially.

  9. Fermentation of cucumbers brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Generation of waste water containing sodium chloride from cucumber fermentation tank yards could be eliminated if cucumbers were fermented in brines that did not contain this salt. To determine if this is feasible, cucumbers were fermented in brines that contained only calcium chloride to maintain f...

  10. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    USGS Publications Warehouse

    Tommasso J.R., Wright; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  11. Commercial scale cucumber fermentations brined with calcium chloride instead of sodium chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride instead of NaCl...

  12. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    PubMed Central

    Eckhardt, M.-C.; Nielsen, P. E.

    2016-01-01

    Background. Congenital chloride diarrhea (CCD) is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3− exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L) and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected. PMID:27635272

  13. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces.

    PubMed

    Gils, C; Eckhardt, M-C; Nielsen, P E; Nybo, M

    2016-01-01

    Background. Congenital chloride diarrhea (CCD) is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl(-)/HCO3 (-) exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L) and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected. PMID:27635272

  14. Effect of mercuric chloride and methylmercury chloride exposure on tissue concentrations of six essential minerals

    SciTech Connect

    Bogden, J.D.; Kemp, F.W.; Troiano, R.A.; Jortner, B.S.; Timpone, C.; Giuliani, D.

    1980-04-01

    There are few data on the effects of mercury exposure on tissue concentrations of essential minerals. Male Sprague-Dawley rats were exposed to mercuric chloride and methylmercury chloride administered via the drinking water. Subsequently, the kidneys, spleen, liver, and brain were analyzed for mercury, calcium, copper, magnesium, manganese, iron, and zinc by atomic absorption spectrophotometry. Significant differences from controls were found for brain copper, kidney copper, and kidney zinc in the mercuric chloride-exposed animals; and for brain iron, kidney copper, kidney iron, kidney magnesium, spleen magnesium, and liver manganese in the methylmercury chloride-exposed rats. There was a fivefold higher mean kidney copper concentration in the mercuric chloride-exposed group; this may be related to the induction of renal metallothionein synthesis by mercury. Increased kidney copper may be a manifestation of heavy metal-induced renal toxicity. Both inorganic and methylmercury exposure produce significant changes in tissue concentrations of some essential minerals.

  15. Mechanism for forming hydrogen chloride and sodium sulfate from sulfur trioxide, water, and sodium chloride

    NASA Technical Reports Server (NTRS)

    Anderson, A. B.

    1984-01-01

    A molecular orbital study of sodium sulfate and hydrogen chloride formation from sulfur trioxide, water, and sodium chloride shows no activation barrier, in agreement with recent experimental work of Kohl, Fielder, and Stearns. Two overall steps are found for the process. First, gas-phase water reacts with sulfur trioxide along a pathway involving a linear O-H-O transition state yielding closely associated hydroxyl and bisulfite which rearrange to become a hydrogen sulfate molecule. Then the hydrogen sulfate molecule transfers a hydrogen atom to a surface chloride in solid sodium chloride while an electron and a sodium cation simultaneously transfer to yield sodium bisulfate and gas-phase hydrogen chloride. This process repeats. Both of these steps represent well-known reactions for which mechanisms have not been previously determined.

  16. Advanced intermediate temperature sodium copper chloride battery

    NASA Astrophysics Data System (ADS)

    Yang, Li-Ping; Liu, Xiao-Min; Zhang, Yi-Wei; Yang, Hui; Shen, Xiao-Dong

    2014-12-01

    Sodium metal chloride batteries, also called as ZEBRA batteries, possess many merits such as low cost, high energy density and high safety, but their high operation temperature (270-350 °C) may cause several issues and limit their applications. Therefore, decreasing the operation temperature is of great importance in order to broaden their usage. Using a room temperature ionic liquid (RTIL) catholyte composed of sodium chloride buffered 1-ethyl-3-methylimidazolium chloride-aluminum chloride and a dense β″-aluminates solid electrolyte film with 500 micron thickness, we report an intermediate temperature sodium copper chloride battery which can be operated at only 150 °C, therefore alleviating the corrosion issues, improving the material compatibilities and reducing the operating complexities associated with the conventional ZEBRA batteries. The RTIL presents a high ionic conductivity (0.247 S cm-1) at 150 °C and a wide electrochemical window (-2.6 to 2.18 vs. Al3+/Al). With the discharge plateau at 2.64 V toward sodium and the specific capacity of 285 mAh g-1, this intermediate temperature battery exhibits an energy density (750 mWh g-1) comparable to the conventional ZEBRA batteries (728-785 mWh g-1) and superior to commercialized Li-ion batteries (550-680 mWh g-1), making it very attractive for renewable energy integration and other grid related applications.

  17. Vinyl chloride loss during laboratory holding time.

    PubMed

    Soule, R; Symonik, D; Jones, D; Turgeon, D; Gerbec, B

    1996-06-01

    Because vinyl chloride is a potent human carcinogen, it is important that analytical results from groundwater samples accurately reflect levels of exposure to groundwater users. This study investigated the current allowable holding time of 14 days to determine if vinyl chloride is lost from samples during this time. Samples containing an initial concentration of 2 microg/liter of vinyl chloride showed progressive, increasing losses when held for 1, 2, 7, and 14 days. Due to the inherent variability of low-level laboratory results, the most statistically significant loss (alpha = 0.05) was seen for samples held for 14 days. No statistically significant differences in degradation pattern were noted between analytical detectors used (PID versus Hall) or sample type (lab versus field). There also was a loss of vinyl chloride observed during sample collection and handling. These results suggest that analytical variability at low concentrations and the establishment of health-based guidelines near the analytical detection limit require multiple samples be collected from a single location when highly accurate results are needed. These findings should be considered in public health exposure assessments and the implementation of health-based recommendations at sites with vinyl chloride groundwater contamination.

  18. Dynamic Electrochemical Measurement of Chloride Ions.

    PubMed

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-02-05

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures.

  19. Dynamic Electrochemical Measurement of Chloride Ions.

    PubMed

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-01-01

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures. PMID:26889572

  20. Combining sulfate electrowinning with chloride leaching

    NASA Astrophysics Data System (ADS)

    Fletcher, A. W.; Sudderth, R. B.; Olafson, S. M.

    1991-08-01

    Although the chloride leaching of copper sulfide concentrates has proved highly efficient, electrowinning from chloride solutions presents many difficulties, notably in cell design and the handling of the powder product. Sulfate electrowinning,on the other hand, continues to improve and has played a significant part in the widespread adoption of the solvent extraction-electrowinning process for copper recovery from low-grade ores. It has been found that the two steps can be combined by introducing a novel solvent extraction process after chloride leaching. This article presents the results of laboratory tests to prove the feasibility of this approach and discusses how it can be integrated into a commercially viable flow sheet.

  1. Is sodium chloride worth its salt?

    PubMed

    McIntosh, Euan; Andrews, Peter J

    2013-06-11

    The choice of fluid for resuscitation of the brain-injured patient remains controversial, and the 'ideal' resuscitation fluid has yet to be identified. Large volumes of hypotonic solutions must be avoided because of the risk of cerebral swelling and intracranial hypertension. Traditionally, 0.9% sodium chloride has been used in patients at risk of intracranial hypertension, but there is increasing recognition that 0.9% saline is not without its problems. Roquilly and colleagues show a reduction in the development of hyperchloremic acidosis in brain-injured patients given 'balanced' solutions for maintenance and resuscitation compared with 0.9% sodium chloride. In this commentary, we explore the idea that we should move away from 0.9% sodium chloride in favor of a more 'physiological' solution.

  2. Reactivity of vinyl chloride ionic clusters

    NASA Astrophysics Data System (ADS)

    Martrenchard, S.; Dedonder-Lardeux, C.; Dimicoli, I.; Grégoire, G.; Jouvet, C.; Mons, M.; Solgadi, D.

    1998-12-01

    The reactivity of vinyl chloride ionic clusters has been investigated by the Threshold PhotoElectron PhotoIon COincidences technique. In the case of the dimer, the competition between the three reactive channels (HCl, Cl ṡ and CH 2Cl elimination) has been studied. The main reactive channel is HCl elimination which proceeds through a 0.2 eV barrier. This elimination reaction is still observed in the trimer but not in larger clusters. For these clusters, cooling by evaporation of neutral vinyl chloride monomers seems to be the favored channel that hinders the HCl elimination step.

  3. Alkyl Chlorides as Hydrogen Bond Acceptors

    SciTech Connect

    Nadas, Janos I; Vukovic, Sinisa; Hay, Benjamin

    2012-01-01

    To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

  4. Measuring Sodium Chloride Contents of Aerosols

    NASA Technical Reports Server (NTRS)

    Sinha, M. P.; Friedlander, S. K.

    1986-01-01

    Amount of sodium chloride in individual aerosol particles measured in real time by analyzer that includes mass spectrometer. Analyzer used to determine mass distributions of active agents in therapeutic or diagnostic aerosols derived from saline solutions and in analyzing ocean spray. Aerosol particles composed of sodium chloride introduced into oven, where individually vaporized on hot wall. Vapor molecules thermally dissociated, and some of resulting sodium atoms ionized on wall. Ions leave oven in burst and analyzed by spectrometer, which is set to monitor sodium-ion intensity.

  5. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Toxic and Hazardous...

  6. 29 CFR 1915.1017 - Vinyl chloride.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Toxic and Hazardous...

  7. 21 CFR 582.5985 - Zinc chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Zinc chloride. 582.5985 Section 582.5985 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary...

  8. Mercuric chloride (HgCl2)

    Integrated Risk Information System (IRIS)

    Mercuric chloride ( HgCl2 ) ; CASRN 7487 - 94 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Nonc

  9. Absorption media for irreversibly gettering thionyl chloride

    DOEpatents

    Buffleben, George; Goods, Steven H.; Shepodd, Timothy; Wheeler, David R.; Whinnery, Jr., LeRoy

    2002-01-01

    Thionyl chloride is a hazardous and reactive chemical used as the liquid cathode in commercial primary batteries. Contrary to previous thinking, ASZM-TEDA.RTM. carbon (Calgon Corporation) reversibly absorbs thionyl chloride. Thus, several candidate materials were examined as irreversible getters for thionyl chloride. The capacity, rate and effect of temperature were also explored. A wide variety of likely materials were investigated through screening experiments focusing on the degree of heat generated by the reaction as well as the material absorption capacity and irreversibility, in order to help narrow the group of possible getter choices. More thorough, quantitative measurements were performed on promising materials. The best performing getter was a mixture of ZnO and ASZM-TEDA.RTM. carbon. In this example, the ZnO reacts with thionyl chloride to form ZnCl.sub.2 and SO.sub.2. The SO.sub.2 is then irreversibly gettered by ASZM-TEDA.RTM. carbon. This combination of ZnO and carbon has a high capacity, is irreversible and functions effectively above -20.degree. C.

  10. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  11. 21 CFR 182.8252 - Choline chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Choline chloride. 182.8252 Section 182.8252 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8252...

  12. 75 FR 20625 - Barium Chloride From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-20

    ... established a schedule for the conduct of this review (74 FR 62587, November 30, 2010). Subsequently, counsel... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION:...

  13. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... chloride. The additive may contain residues of isopropyl alcohol not in excess of 18 percent by weight when... 1990, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies... Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, and from the American Oil Chemists' Society,...

  14. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... chloride. The additive may contain residues of isopropyl alcohol not in excess of 18 percent by weight when... 1990, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies... Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, and from the American Oil Chemists' Society,...

  15. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... chloride. The additive may contain residues of isopropyl alcohol not in excess of 18 percent by weight when... 1990, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies... Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, and from the American Oil Chemists' Society,...

  16. 21 CFR 173.400 - Dimethyldialkylammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... chloride. The additive may contain residues of isopropyl alcohol not in excess of 18 percent by weight when... 1990, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies... Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, and from the American Oil Chemists' Society,...

  17. MERCURIC CHLORIDE CAPTURE BY ALKALINE SORBENTS

    EPA Science Inventory

    The paper gives results of bench-scale mechanistic studies of mercury/sorbent reactions that showed that mercuric chloride (HgC12) is readily adsorbed by alkaline sorbents, which may offers a less expensive alternative to the use of activated carbons. A laboratory-scale, fixed-b...

  18. CLC chloride channels in Caenorhabditis elegans.

    PubMed

    Schriever, A M; Friedrich, T; Pusch, M; Jentsch, T J

    1999-11-26

    The genome of the nematode Caenorhabditis elegans encodes six putative chloride channels (CeCLC-1 through CeCLC-6) that represent all three known branches of the mammalian CLC gene family. Using promoter fragments to drive the expression of the green fluorescent protein, CeCLC-2, -3, and -4 expression was studied in transgenic C. elegans. CeCLC-4 was specifically expressed in the large H-shaped excretory cell, where it was co-expressed with CeCLC-3, which is also expressed in other cells, including neurons, muscles, and epithelial cells. Also, CeCLC-2 was expressed in several cells of the nervous system, intestinal cells, and vulval muscle cells. Similar to mammalian CLC proteins, only two nematode CLC channels elicited detectable plasma membrane currents in Xenopus oocytes. CeCLC-3 currents were inwardly rectifying and were activated by positive prepulses. Its complex gating behavior can be explained by two gates, at least one of which depends on extracellular anions. In this respect it resembles some mammalian chloride channels with which it also shares a preference of chloride over iodide. C. elegans thus provides new opportunities to understand common mechanisms underlying structure and function in CLC channels and will allow for a genetic dissection of chloride channels in this simple model organism. PMID:10567397

  19. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  20. Controlling chloride ions diffusion in concrete.

    PubMed

    Zeng, Lunwu; Song, Runxia

    2013-11-28

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle.

  1. Controlling chloride ions diffusion in concrete

    PubMed Central

    Zeng, Lunwu; Song, Runxia

    2013-01-01

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle. PMID:24285220

  2. Solvothermal synthesis of strontium phosphate chloride nanowire

    NASA Astrophysics Data System (ADS)

    Lam, W. M.; Wong, C. T.; Li, Z. Y.; Luk, K. D. K.; Chan, W. K.; Yang, C.; Chiu, K. Y.; Xu, B.; Lu, W. W.

    2007-08-01

    Strontium phosphate chloride nanowire was synthesized via a solvothermal treatment of strontium tri-polyphosphate and Collin salt in 1,4-dioxane at 150 °C. The effects of 1,4-dioxane concentration on particle morphology, crystallinity and phase purity were investigated in this study. The specimen morphology was analyzed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). When the concentration of 1,4-dioxane was below 10%, micron-sized whisker was the dominant form. At 20-25% concentration of 1,4-dioxane, strontium phosphate chloride single-crystalline nanowire was 31±12 nm in diameter and 1.43±0.6 μm in length with an aspect ratio of 52.28±29.41. X-ray diffraction (XRD) pattern of this nanowire matched with that of strontium phosphate chloride (JCPDS #083-0973). When 1,4-dioxane concentration exceeded 25%, nanorod aggregate was the dominant form instead of nanowire. At 20-25% 1,4-dioxane concentration suitable strontium concentration combine with high chemical potential environment favors the formation of nanowires. By adding 1,4-dioxane impure phase such as β-strontium hydrogen phosphate, nanorod formation was suppressed. This method provides an efficient way to synthesize high aspect ratio strontium phosphate chloride nanowire. It has potential bioactive nanocomposite, high mechanical performance bioactive bone cement filler and fluorescent material applications.

  3. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  4. 21 CFR 172.180 - Stannous chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Food Preservatives § 172.180...

  5. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  6. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  7. 21 CFR 582.3845 - Stannous chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  8. Hydrolysis of ferric chloride in solution

    SciTech Connect

    Lussiez, G.; Beckstead, L.

    1996-11-01

    The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.

  9. Process for drying calcium chloride generated in high chloride flue gas desulfurization systems

    SciTech Connect

    Gleason, R.J.; Sui, C.T.

    1982-03-30

    Some flue gas desulfurization processes applied to fuels containing high chloride concentrations are utilizing, or plan to utilize, by-product gypsum from the process stream. The utilization of such a process results in a calcium chloride buildup in the flue gas desulfurization system from fuels or water resource containing significant chlorides which interferes with the absorption and utilization of the lime or limestone reagent. In this invention, a method is used to convert the calcium chloride to a dry material by utilizing flue gas at elevated temperatures, normally found before an air preheater on steam generators used to produce power or any other conventional large size steam boilers. The monohydrate is produced at temperatures above 3500 F. By applying this drying process with a power plant system, energy consumed for this drying operation is very efficient.

  10. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    NASA Astrophysics Data System (ADS)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  11. 21 CFR 184.1845 - Stannous chloride (anhydrous and dihydrated).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... 7772-99-8) is the chloride salt of metallic tin. It is prepared by reacting molten tin with either...) is the chloride salt of metallic tin that contains two molecules of water. It is prepared...

  12. Determination of mercurous chloride and total mercury in mercury ores

    USGS Publications Warehouse

    Fahey, J.J.

    1937-01-01

    A method for the determination of mercurous chloride and total mercury on the same sample is described. The mercury minerals are volatilized in a glass tube and brought into intimate contact with granulated sodium carbonate. The chlorine is fixed as sodium chloride, determined with silver nitrate, and computed to mercurous chloride. The mercury is collected on a previously weighed gold coil and weighed.

  13. Making Positive Electrodes For Sodium/Metal Chloride Cells

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Bankston, C. Perry

    1992-01-01

    High coulombic yields provided by sodium/metal chloride battery in which cathode formed by impregnating sintered nickel plaque with saturated solution of nickel chloride. Charge/discharge cycling of nickel chloride electrode results in very little loss of capacity. Used in spacecraft, electric land vehicles, and other applications in which high-energy-density power systems required.

  14. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all completely assembled respirators which are designed for use as respiratory protection during entry into...

  15. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all completely assembled respirators which are designed for use as respiratory protection during entry into...

  16. Benzalkonium chloride. Health hazard evaluation report

    SciTech Connect

    Bernholc, N.M.

    1984-01-01

    Health hazards associated with the use of benzalkonium chlorides (BAC) are reviewed. Benzalkonium chloride is extensively used as a cationic disinfectant. It is found in a great many over-the-counter and prescription eye products, disinfectants, shampoos, and deodorants, and is used in concentrations that range from 0.001 to 0.01% in eyedrops, up to 2.5% in concentrated liquid disinfectants. Solutions of 0.03 to 0.04% BAC may cause temporary eye irritation in humans but are unlikely to cause any skin response except in persons allergic to quaternary ammonium compounds. Inhalation of a vaporized 10% solution of BAC produced a bronchospasmodic reaction in a previously sensitized individual. At present no other human health effects from BAC have been documented or inferred from exposure to such dilute concentrations.

  17. Liver fibrosis in asymptomatic polyvinyl chloride workers.

    PubMed

    Hsiao, Tun-Jen; Wang, Jung-Der; Yang, Pei-Ming; Yang, Pei-Cheng; Cheng, Tsun-Jen

    2004-09-01

    This study was designed to determine whether vinyl chloride monomer (VCM) exposure is associated with liver fibrosis. A total of 347 workers with occupational exposure to VCM were systemically examined using liver ultrasonography and routine liver function tests. Vinyl chloride monomer cumulative dose (ppm-month) was estimated by summing the products of air VCM concentration levels and months of employment. Liver fibrosis was defined in subjects with precirrhosis and cirrhosis of liver diagnosed using ultrasonography. Significantly increased risks of developing liver fibrosis were found in workers who had history of high exposure jobs (odds ratio 5.5, 95% confidence interval 1.7-25.4) when compared with workers who did not have history of high exposure jobs. We concluded that there was an increased risk of developing liver fibrosis in PVC workers who had high exposure to VCM.

  18. Calcium chloride rhenate(VII) dihydrate.

    PubMed

    Jarek, Urszula; Hołyńska, Małgorzata; Rlepokura, Katarzyna; Lis, Tadeusz

    2007-09-01

    The crystal structure of calcium chloride rhenate(VII) dihydrate, CaCl(ReO4).2H2O, investigated at 85 K, consists of calcium cations, chloride anions, rhenate(VII) anions and water molecules. In the nearly tetrahedral rhenate(VII) anion, all constituent atoms lie on special positions of m2m (Re) and m (O) site symmetries. The Cl- anion and water O atom lie on special positions of m2m and 2 site symmetries, respectively. The Ca2+ ion, also on a special position (m2m), is eight-coordinated in a distorted square-antiprismatic coordination mode. The crystal has a layered structure stabilized by Ca-O coordination bonds and O-H...Cl hydrogen bonds.

  19. Precipitation of metal nitrides from chloride melts

    SciTech Connect

    Slater, S.A.; Miller, W.E.; Willit, J.L.

    1996-12-31

    Precipitation of actinides, lanthanides, and fission products as nitrides from molten chloride melts is being investigated for use as a final cleanup step in treating radioactive salt wastes generated by electrometallurgical processing of spent nuclear fuel. The radioactive components (eg, fission products) need to be removed to reduce the volume of high-level waste that requires disposal. To extract the fission products from the salt, a nitride precipitation process is being developed. The salt waste is first contacted with a molten metal; after equilibrium is reached, a nitride is added to the metal phase. The insoluble nitrides can be recovered and converted to a borosilicate glass after air oxidation. For a bench-scale experimental setup, a crucible was designed to contact the salt and metal phases. Solubility tests were performed with candidate nitrides and metal nitrides for which there are no solubility data. Experiments were performed to assess feasibility of precipitation of metal nitrides from chloride melts.

  20. Gasometric titration for dimethylaluminum chloride analysis.

    PubMed

    Wang, Lin; Maligres, Peter; Eckenroad, Kyle; Simmons, Bryon

    2016-06-01

    A gasometric titration method was developed to quantitate active alkylaluminum content in dimethylaluminum chloride solution to perform the stoichiometry calculation for the reaction charge. The procedure was reproducible with good precision, and the results showed good correlation with ICP-MS method. The gasometric titration is a simple, inexpensive alternative to analysis via ICP-MS which provides more selective analysis of methylaluminum species without the need for inertion.

  1. Radio-Purification of Neodymium Chloride

    SciTech Connect

    Hans, S.; Yeh, M.; Cumming, J. B.; Hahn, R. L.

    2011-04-27

    Organometallic liquid scintillator becomes one of the man detection mediums for neutrino experiment. Liquid-liquid extraction is the method of choice for loading metallic ions of interest into the organic solvents at BNL. High purity of all starting materials is essential for the optimization of synthesis. A newly developed 'self-scavenging' technique was applied to purify undesired radioisotopes from the starting metal compound and found to effectively remove thorium and such containments from the neodymium chloride for SNO+.

  2. Removing Chlorides From Metallurgical-Grade Silicon

    NASA Technical Reports Server (NTRS)

    Breneman, W. C.; Coleman, L. M.

    1982-01-01

    Process for making low-cost silicon for solar cells is further improved. Silane product recycled to feed stripper column converts some of heavy impurities to volatile ones that pass off at top of column with light wastes. Impurities--chlorides of arsenic, phosphorus, and boron-would otherwise be carried to subsequent distillations where they would be difficult to remove. Since only a small amount of silane is recycled, silicon production efficiency remains high.

  3. Method for the regeneration of spent molten zinc chloride

    DOEpatents

    Zielke, Clyde W.; Rosenhoover, William A.

    1981-01-01

    In a process for regenerating spent molten zinc chloride which has been used in the hydrocracking of coal or ash-containing polynuclear aromatic hydrocarbonaceous materials derived therefrom and which contains zinc chloride, zinc oxide, zinc oxide complexes and ash-containing carbonaceous residue, by incinerating the spent molten zinc chloride to vaporize the zinc chloride for subsequent condensation to produce a purified molten zinc chloride: an improvement comprising the use of clay in the incineration zone to suppress the vaporization of metals other than zinc. Optionally water is used in conjunction with the clay to further suppress the vaporization of metals other than zinc.

  4. Boldine action against the stannous chloride effect.

    PubMed

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS. PMID:10624900

  5. Understanding microwave vessel contamination by chloride species.

    PubMed

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature. PMID:27474275

  6. Understanding microwave vessel contamination by chloride species.

    PubMed

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature.

  7. An autopsy case of zinc chloride poisoning.

    PubMed

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death. PMID:27497327

  8. Watershed scale chloride storage across a gradient of urbanization

    NASA Astrophysics Data System (ADS)

    Wellen, C. C.; Oswald, C. J.; Oni, S. K.

    2014-12-01

    Sodium chloride is the main de-icing agent used during the winter in Canada and the northern United States. However, little is known about the long term fate, residence time, and ecological effects of chloride. This talk integrates work taking place across three sites in Southern Ontario, Canada: Hamilton Harbour, the Toronto lakeshore, and Lake Simcoe. We quantify chloride inputs, outputs, and changes in storage for a number of watersheds across a gradient of urbanization. For the three winter months (January, February, March), we show that stream water chloride concentrations approach those of brackish waters for urban watersheds. Chloride is also highly persistent, with stream water chloride concentrations decreasing from the winter months and approaching baseline levels only in July. These baseline levels are greater than 100 mg Cl/l in the urban watersheds, suggesting high levels of chloride storage in soil and groundwater. Using road salt application rates and groundwater levels and chloride concentrations, we estimate the magnitude and residence time of the chloride pools in a number of watersheds across a gradient of urbanization. Our results suggest that the magnitude and residence time of chloride storage varies with urbanization and other factors. We show that summer baseflow concentrations do approach the EPA's chronic exposure guideline of 230 mg Cl/l, implying more work is needed to understand the in stream and downstream ecological effects of chloride.

  9. Ionic liquids as recycling solvents for the synthesis of magnetic nanoparticles.

    PubMed

    Oliveira, Flavia C C; Effenberger, Fernando B; Sousa, Marcelo H; Jardim, Renato F; Kiyohara, Pedro K; Dupont, Jairton; Rubim, Joel C; Rossi, Liane M

    2011-08-14

    This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 °C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.

  10. Mechanistic characterization of chloride interferences in electrothermal atomization systems

    USGS Publications Warehouse

    Shekiro, J.M.; Skogerboe, R.K.; Taylor, H.E.

    1988-01-01

    A computer-controlled spectrometer with a photodiode array detector has been used for wavelength and temperature resolved characterization of the vapor produced by an electrothermal atomizer. The system has been used to study the chloride matrix interference on the atomic absorption spectrometric determination of manganese and copper. The suppression of manganese and copper atom populations by matrix chlorides such as those of calcium and magnesium is due to the gas-phase formation of an analyte chloride species followed by the diffusion of significant fractions of these species from the atom cell prior to completion of the atomization process. The analyte chloride species cannot be formed when matrix chlorides with metal-chloride bond dissociation energies above those of the analyte chlorides are the principal entitles present. The results indicate that multiple wavelength spectrometry used to obtain temperature-resolved spectra is a viable tool in the mechanistic characterization of interference effects observed with electrothermal atomization systems. ?? 1988 American Chemical Society.

  11. Properties of a new liquid desiccant solution - Lithium chloride and calcium chloride mixture

    SciTech Connect

    Ertas, A.; Anderson, E.E.; Kiris, I. )

    1992-09-01

    Desiccants, broadly classified as solid and liquid desiccants, have the property of extracting and retaining moisture from air brought into contact with them. By using either type, moisture in the air is removed and the resulting dry air can be used for air-conditioning or drying purposes. Because of its properties, lithium chloride is the most stable liquid desiccant and has a large dehydration concentration (30% to 45%), but its cost is relatively high ($9.00-13.00 per kg). It is expected that lithium chloride will reduce the relative humidity to as low as 15%. Calcium chloride is the cheapest (45 cents per kg) and most readily available desiccant, but it has the disadvantage of being unstable depending on the air inlet conditions and the concentration of the desiccant in the solution. To stabilize calcium chloride and to decrease the high cost of lithium chloride, the two can be mixed in different weight combinations. The main objective of this research is to measure the physical properties of different combinations of this mixture such as density, viscosity, and vapor pressure which are necessary for analysis of heat and mass transfer in a packed tower desiccant-air contact system. The solubility of this new liquid desiccant under certain temperature-concentrations will also be studied.

  12. Solution-Derived, Chloride-Containing Minerals as a Waste Form for Alkali Chlorides

    SciTech Connect

    Riley, Brian J.; Crum, Jarrod V.; Matyas, Josef; McCloy, John S.; Lepry, William C.

    2012-10-01

    Sodalite [Na8(AlSiO4)6Cl2] and cancrinite [(Na,K)6Ca2Al6Si6O24Cl4] are environmentally stable, chloride-containing minerals and are a logical waste form option for the mixed alkali chloride salt waste stream that is generated from a proposed electrochemical separations process during nuclear fuel reprocessing. Due to the volatility of chloride salts at moderate temperatures, the ideal processing route for these salts is a low-temperature approach such as the sol-gel process. The sodalite structure can be easily synthesized by the sol-gel process; however, it is produced in the form of a fine powder with particle sizes on the order of 1–10 µm. Due to the small particle size, these powders require additional treatment to form a monolith. In this study, the sol-gel powders were pressed into pellets and fired to achieve > 90% of theoretical density. The cancrinite structure, identified as the best candidate mineral form in terms of waste loading capacity, was only produced on a limited basis following the sol-gel process and converted to sodalite upon firing. Here we discuss the sol-gel process specifics, chemical durability of select waste forms, and the steps taken to maximize chloride-containing phases, decrease chloride loss during pellet firing, and increase pellet densities.

  13. Identification of the different sources of chlorides in streams by regression analysis using chloride-discharge relationships

    SciTech Connect

    Albek, E.

    1999-12-01

    Chloride-discharge relationships at several stations on Turkish streams are investigated, both qualitatively and quantitatively, to identify natural and anthropogenic sources of chloride. Simple expressions are used to distinguish among sources. Linear regression analysis is conducted to estimate parameters of the models. Five groups of stations are distinguished respective to different sources of chloride and change of chloride concentration with stream discharge. Emphasis is placed on the identification of anthropogenic sources of chloride to aid in water pollution control strategies. The polluted Sakarya River and its primary tributary, the Porsuk Stream, are studied in detail to trace chloride behavior along the waterway and to assess the level of pollution from cities discharging to the streams. Among natural sources of chloride, evaporite sediment sources are examined in detail.

  14. Crystal structures of salicylideneguanylhydrazinium chloride and its copper(II) and cobalt(III) chloride complexes

    SciTech Connect

    Chumakov, Yu. M. Tsapkov, V. I.; Bocelli, G.; Antosyak, B. Ya.; Shova, S. G.; Gulea, A. P.

    2006-01-15

    The crystal structures of salicylideneguanylhydrazinium chloride hydrate hemiethanol solvate (I), salicylideneguanylhydrazinium trichloroaquacuprate(II) (II), and bis(salicylideneguanylhydrazino)cobalt(III) chloride trihydrate (III) are determined using X-ray diffraction. The structures of compounds I, II, and III are solved by direct methods and refined using the least-squares procedure in the anisotropic approximation for the non-hydrogen atoms to the final factors R = 0.0597, 0.0212, and 0.0283, respectively. In the structure of compound I, the monoprotonated molecules and chlorine ions linked by hydrogen bonds form layers aligned parallel to the (010) plane. In the structure of compound II, the salicylaldehyde guanylhydrazone cations and polymer chains consisting of trichloroaquacuprate(II) anions are joined by an extended three-dimensional network of hydrogen bonds. In the structure of compound III, the [Co(LH){sub 2}]{sup +} cations, chloride ions, and molecules of crystallization water are linked together by a similar network.

  15. Substituent effects on ferrocenes in aluminum chloride-butylpyridinium chloride molten-salt mixtures

    SciTech Connect

    Edgecombe, A.L.; Fowler, J.S.; Gibbard, H.F. ); Slocum, D.W. ); Phillips, J. )

    1990-02-01

    The visible absorption spectra and reduction potentials of 11 ferrocenes containing electron-withdrawing substituents were determined in an N-n-butylpyridinium chloride-aluminum chloride molten salt. When the substituent(s) on the cyclopentadienyl ring(s) of ferrocene were varied, the reduction potential was caused to range over 1.25 V, and the wavelength for maximum absorption of visible light was varied by nearly 200 nm. These changes are greater than have been observed for similar ferrocenes in other nonaqueous solvents. Evidence is presented for specific interactions of particular ferrocenes with the molten salt.

  16. Chloride Fluxes in Isolated Dialyzed Barnacle Muscle Fibers

    PubMed Central

    DiPolo, R.

    1972-01-01

    Chloride outflux and influx has been studied in single isolated muscle fibers from the giant barnacle under constant internal composition by means of a dialysis perfusion technique. Membrane potential was continually recorded. The chloride outfluxes and influxes were 143 and 144 pmoles/cm2-sec (mean resting potential: 58 mv, temperature: 22°–24°C) with internal and external chloride concentrations of 30 and 541 mM, respectively. The chloride conductance calculated from tracer measurements using constant field assumptions is about fourfold greater than that calculated from published electrical data. Replacing 97% of the external chloride ions by propionate reduces the chloride efflux by 51%. Nitrate ions applied either to the internal or external surface of the membrane slows the chloride efflux. The external pH dependence of the chloride efflux follows the external pH dependence of the membrane conductance, in the range pH 3.9–4.7, increasing with decreasing pH. In the range pH 5–9, the chloride efflux increased with increasing pH, in a manner similar to that observed in frog muscle fibers. The titration curve for internal pH changes in the range 4.0–7.0 was quantitatively much different from that for external pH change, indicating significant asymmetry in the internal and external pH dependence of the chloride efflux. PMID:5074810

  17. Twenty years of fluorescence imaging of intracellular chloride

    PubMed Central

    Arosio, Daniele; Ratto, Gian Michele

    2014-01-01

    Chloride homeostasis has a pivotal role in controlling neuronal excitability in the adult brain and during development. The intracellular concentration of chloride is regulated by the dynamic equilibrium between passive fluxes through membrane conductances and the active transport mediated by importers and exporters. In cortical neurons, chloride fluxes are coupled to network activity by the opening of the ionotropic GABAA receptors that provides a direct link between the activity of interneurons and chloride fluxes. These molecular mechanisms are not evenly distributed and regulated over the neuron surface and this fact can lead to a compartmentalized control of the intracellular concentration of chloride. The inhibitory drive provided by the activity of the GABAA receptors depends on the direction and strength of the associated currents, which are ultimately dictated by the gradient of chloride, the main charge carrier flowing through the GABAA channel. Thus, the intracellular distribution of chloride determines the local strength of ionotropic inhibition and influences the interaction between converging excitation and inhibition. The importance of chloride regulation is also underlined by its involvement in several brain pathologies, including epilepsy and disorders of the autistic spectra. The full comprehension of the physiological meaning of GABAergic activity on neurons requires the measurement of the spatiotemporal dynamics of chloride fluxes across the membrane. Nowadays, there are several available tools for the task, and both synthetic and genetically encoded indicators have been successfully used for chloride imaging. Here, we will review the available sensors analyzing their properties and outlining desirable future developments. PMID:25221475

  18. The Structure of Nickel Chloride in the Ionic Liquid 1-Ethyl-3-methyl Imidazolium Chloride/Aluminum Chloride: X-ray Absorption Spectroscopy

    SciTech Connect

    D Roeper; K Pandya; G Cheek; W OGrady

    2011-12-31

    The structure of anhydrous nickel chloride in the ionic liquid 1-ethyl-3-methyl imidazolium chloride and aluminum chloride has been investigated with extended X-ray absorption fine structure (EXAFS) in both Lewis acid and Lewis base solutions. The EXAFS data of NiCl{sub 2} {center_dot} 6H{sub 2}O crystals were also recorded and analyzed to demonstrate the difference file technique. The difference file technique is used to obtain the structural information for the very closely spaced coordination shells of chloride and oxygen in NiCl{sub 2} {center_dot} 6H{sub 2}O and they are found to agree very closely with the X-ray diffraction data. The difference file technique is then used to analyze the nickel chloride in the ionic liquid solutions. Even though anhydrous NiCl{sub 2} is more soluble in the basic solution than in the acidic solution, the EXAFS data show a single coordination of four chlorides in a tetrahedron around the nickel atom in the basic solution. In a weak acid solution, there are six chlorides in a single octahedral coordination shell around the nickel. However, in a strong acid solution, in addition to the octahedral chloride-coordination shell, there is a second coordination shell of eight aluminum atoms in the form of a simple cube.

  19. [Experimental chronic phenylmercuric chloride poisoning in pigs].

    PubMed

    Raszyk, J; Docekalová, H; Rubes, J; Navrátil, S; Masek, J; Rodák, L

    1992-07-01

    Four gilts, sisters from one litter, aged 70 days and weighing 20-24 kg, were used for a trial. Two experimental gilts (P) were administered an experimental feed mixture containing phenylmercury chloride (40 mg/kg). Two control gilts (K) were fed the same mixture but without phenylmercury chloride. P gilts began to lag behind in their growth from day 60 of the experiment, they manifested nonphysiological postures (dog's sitting posture), paresis of hind limbs and uncoordinated movements. P gilts had cloudy, orange-brown urine from day 70 and from day 75 they began to suffer from diarrhoea. Mercury (Hg) contents in urine and blood serum of P gilts were irregularly variable: urine 0.58-2.15 mg/l, blood serum 0.02-0.37 mg/l. Hg content in excrements of P gilts fluctuated from 23 to 26 mg/kg. Vitamin A concentrations in blood serum and liver decreased in P gilts. Phenylmercury chloride feeding caused mutagenic changes in peripheral lymphocytes of P gilts (an increase in the number of aberrant cells from 2-3% to 8-9%) and reduced IgA, IgM and IgG immunoglobulin levels in blood serum. Pathological lesions were observed in the colon, kidneys and liver. None of the above-mentioned changes were observed in K gilts. Increased resistance to the negative effects of Hg was found in one experimental gilt. In comparison with K gilts, Hg concentrations in P gilts after 130 days of the experiment increased as follows: 427 times in kidneys, 333 times in liver, 106 times in guts, 71 times in pancreas, 53 times in ovaries, 50 times in muscles, 47 times in bristles and 16 times in the brain.(ABSTRACT TRUNCATED AT 250 WORDS)

  20. Active lithium chloride cell for spacecraft power

    NASA Technical Reports Server (NTRS)

    Fleischmann, C. W.; Horning, R. J.

    1988-01-01

    An active thionyl chloride high rate battery is under development for spacecraft operations. It is a 540kC (150 Ah) battery capable of pulses up to 75A. This paper describes the design and initial test data on a 'state-of-the-art' cell that has been selected to be the baseline for the prototype cell for that battery. Initial data indicate that the specification can be met with fresh cells. Data for stored cells and additional environmental test data are in the process of being developed.

  1. REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS

    DOEpatents

    Hyman, M.L.; Savolainen, J.E.

    1960-01-01

    A method is given for dissolving reactor fuel elements in which the uranium is associated with a relatively inert chromium-containing alloy such as stainless steel. An aqueous mixture of acids comprising 2 to 2.5 molar hydrochloric acid and 4 to 8 molar nitric acid is employed in dissolving the fuel element. In order io reduce corrosion in subsequent processing of the resulting solution, chloride values are removed from the solution by contacting it with concentrated nitric acid at an elevated temperature.

  2. Anodic Behavior of Alloy 22 in Calcium Chloride and in Calcium Chloride Plus Calcium Nitrate Brines

    SciTech Connect

    Evans, K J; Day, S D; Ilevbare, G O; Whalen, M T; King, K J; Hust, G A; Wong, L L; Estill, J C; Rebak, R B

    2003-05-13

    Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this work was to characterize the anodic behavior of Alloy 22 in concentrated calcium chloride (CaCl{sub 2}) brines and to evaluate the inhibitive effect of nitrate, especially to localized corrosion. Standard electrochemical tests such as polarization resistance and cyclic polarization were used. Results show that the corrosion potential of Alloy 22 was approximately -360 mV in the silver-silver chloride (SSC) scale and independent of the tested temperature. Cyclic polarization tests showed that Alloy 22 was mainly susceptible to localized attack in 5 M CaCl{sub 2} at 75 C and higher temperatures. The addition of nitrate in a molar ratio of chloride to nitrate equal to 10 increased the onset of localized corrosion to approximately 105 C. The addition of nitrate to the solution also decreased the uniform corrosion rate and the passive current of the alloy.

  3. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...(d), there is to be no discharge to the atmosphere from any relief valve on any equipment in vinyl... emissions from loading and unloading lines in vinyl chloride service which are opened to the atmosphere... unloading operation and before opening a loading or unloading line to the atmosphere, the quantity of...

  4. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...(d), there is to be no discharge to the atmosphere from any relief valve on any equipment in vinyl... emissions from loading and unloading lines in vinyl chloride service which are opened to the atmosphere... unloading operation and before opening a loading or unloading line to the atmosphere, the quantity of...

  5. Enrofloxacin hydro­chloride dihydrate

    PubMed Central

    Miranda-Calderón, Jorge E.; Gutiérrez, Lilia; Flores-Alamo, Marcos; García-Gutiérrez, Ponciano; Sumano, Héctor

    2014-01-01

    The asymmetric unit of the title compound, C19H23FN3O3 +·Cl−·2H2O [systematic name: 4-(3-carb­oxy-1-cyclo­propyl-6-fluoro-4-oxo-1,4-di­hydro­quin­o­lin-7-yl)-1-ethyl­piperazin-1-ium chloride dihydrate], consists of two independent monocations of the protonated enrofloxacin, two chloride anions and four water mol­ecules. In the cations, the piperazinium rings adopt chair conformations and the dihedral angles between the cyclo­propyl ring and the 10-membered quinoline ring system are 56.55 (2) and 51.11 (2)°. An intra­molecular O—H⋯O hydrogen bond is observed in each cation. In the crystal, the components are connected via O—H⋯Cl, N—H⋯Cl and O—H⋯O hydrogen bonds, and a π–π inter­action between the benzene rings [centroid–centroid distance = 3.6726 (13) Å], resulting in a three-dimensional array. PMID:24826167

  6. Radiolytic preparation of anhydrous tin (2) chloride

    NASA Technical Reports Server (NTRS)

    Philipp, W. H.; Marsik, S. J.

    1973-01-01

    Anhydrous tin (2) chloride (SnCl2) is prepared by radiolysis with high energy electrons of a tin (4) chloride (SnCl4) solution in heptane. The SnCl4 is reduced to insoluble SNCl2. The energy yield, G(SnCl2), molecules of SnCl2, produced per 100 eV, increases with SnCl4 concentration from 1.6 at 0.15 M SnCl4 to 3.1 at 3.0 M SnCl4. Other parameters such as temperature total dose and beam current have little influence on G(SnCl2). The method may be used to prepare other metal halides if the higher valence, more covalent metal halide is soluble in aliphatic hydrocarbons and the lower more ionic metal halide is insoluble. The reaction mechanism is discussed; the radiolysis of both heptane and SnCl4 is involved. At high SnCl4 concentration G(SnCl2) appears to be limited by the yield of SnC13 radicals.

  7. Vinyl chloride-induced hepatic angiosarcoma.

    PubMed

    Falk, H

    1987-01-01

    In early 1974, an alert plant physician reported the occurrence of several cases of the otherwise rare hepatic angiosarcoma (HAS) at a single polyvinyl chloride (PVC) production facility in Louisville, Kentucky (U.S.A.). Upon further investigation, the relative risk for HAS at this plant appeared to be approximately 5,000, strongly indicating a causal relationship with some factor at the plant. Epidemiologic studies at this and other PVC polymerization plants identified vinyl chloride monomer (VCM) as the causative agent. Experimental studies reported in early 1974 confirmed VCM as a hepatic carcinogen capable of producing HAS and other tumors. Follow-up epidemiologic studies revealed that: 1) HAS is the end stage of a progressive liver disease consisting of hepatocytic and sinusoidal cell hyperplasia, sinusoidal dilatation, and hepatic fibrosis; 2) over 100 cases of VCM-induced HAS have occurred worldwide; and 3) an increased risk of lung cancer has been reported in some cohort studies of PVC polymerization workers, although this outcome may be related to PVC dust or factors other than VCM. A national study of HAS in the United States identified 3 other causes of HAS: Thorotrast, inorganic arsenic, and androgenic-anabolic steroids. Of 168 cases found to occur during 1964 through 1974, 42 cases (25%) were associated with the 4 known etiologic agents, while 126 cases (75%) were of unknown etiology.

  8. Processing of mercurous chloride in reduced gravity

    NASA Astrophysics Data System (ADS)

    Watson, C.; Singh, N. B.; Thomas, A.; Nelson, A. E.; Rolin, T. O.; Griffin, J.; Haulenbeek, G.; Daniel, N.; Seaquist, J.; Cacioppo, C.; Weber, Jerry; Zugrav, Maria I.; Naumann, R. J.

    1996-07-01

    In a joint experiment between the Northrop-Grumman Science and Technology Center and the University of Alabama in Huntsville, Consortium for Materials Development in Space, single crystals of mercurous chloride were grown in the Space Experiment Facility (SEF) transparent furnace that was flown on Spacehab 4 in May 1996. Mercurous chloride is an acousto-optical material with an unusually low acoustic velocity and high acousto-optical figure of merit. Single crystals of this material can be readily grown in normal gravity by closed-tube physical vapor transport, but the crystals generally contain structural inhomogeneities which degrade the optical performance. The nature and cause of these defects are not completely understood, but their degree appears to correlate with the Rayleigh number that characterizes the convective transport during their growth; hence, it is suspected that uncontrolled convection may play a role in the defect structure. The objective of the flight experiment was to reduce the convective flows by several orders of magnitude to see if the structural inhomogeneities can be reduced or eliminated. This paper will describe the physical and thermal properties of the SEF furnace, the ampule design and loading procedure, and the ground testing, and will also present the preliminary flight results.

  9. Open cycle lithium chloride cooling system

    NASA Astrophysics Data System (ADS)

    Lenz, T. G.; Loef, G. O. G.; Iyer, R.; Wenger, J.

    1983-05-01

    A lithium chloride open cycle absorption chiller has been designed, built and tested. Solution reconcentration takes place in a small counter current packed column supplied with solar heated air. Removal of noncondensable gases that enter the chiller dissolved in the strong solution and the make-up refrigerant streams is accomplished by a liquid-jet ejector and a small vacuum pump. Cooling capacities approaching 1.4 tons and COP levels of 0.58 have been achieved at non-optimum operating conditions. Test results from preliminary system operation suggest that mass transfer processes in both the packed column reconcentrator and the absorber are controlled by concentration gradients in the lithium chloride solution. Liquid phase controlled mass transfer dictates an operating strategy different from the previously assumed gas phase controlled process to obtain maximum rates of evaporation in the packed column. Determination of optimal operating conditions leading to decreased electrical power consumption and improved cooling capacity and coefficient of performance will require further analysis and testing.

  10. Antagonists for acute oral cadmium chloride intoxication

    SciTech Connect

    Basinger, M.A.; Jones, M.M.; Holscher, M.A.; Vaughn, W.K.

    1988-01-01

    An examination has been carried out on the relative efficacy of a number of chelating agents when acting as antagonists for oral cadmium chloride intoxication in mice. The compounds were administered orally after the oral administration of cadmium chloride at 1 mmol/kg. Of the compounds examined, several were useful in terms of enhancing survival, but by far the most effective in both enhancing survival and leaving minimal residual levels of cadmium in the liver and the kidney, was meso-2,3-dimercaptosuccinic acid (DMSA). Several polyaminocarboxylic acids also enhanced survival. The most effective of these in reducing liver and kidney levels of cadmium were diethylenetriaminepentaacetic acid (DTPA), trans-1,2-diaminocyclohexane-N,N,N'N'-tetraacetic acid (CDTA), and triethylenetetraminehexaacetic acid (TTHA). D-Penicillamine (DPA) was found to promote survival but also led to kidney cadmium levels higher than those found in the controls. Sodium 2,3-dimercaptopropane-1-sulfonate (DMPS) was as effective in promoting survival as DMSA but left levels of cadmium in the kidney and liver that were approximately four times greater than those found with DMSA.

  11. The sodium chloride primary pressure gauge

    NASA Technical Reports Server (NTRS)

    Ruoff, A. L.; Chhabildas, L. C.

    1976-01-01

    The failure of a central force model for sodium chloride is discussed. It is noted that it does not closely satisfy the Cauchy conditions at low temperatures, and that it fails the central force requirement of the Love condition. The available shock data for sodium chloride and its analysis is examined, and two reasons why the Hugoniot transformation pressure is likely to be less than 231 kbar are discussed. The important (but unjustified) theoretical assumptions made in converting Hugoniot to isothermal data is discussed; it is noted that serious error can enter for very large pressures for a given material and that at such high pressures the isothermal data should thus be considered only semiquantitative even if the Hugoniot data itself is accurate. An alternate method of estimating the isothermal transformation pressure from the Hugoniot transformation pressure is used. This method is based on the temperature derivative of the transformation pressure. On this basis it is concluded that an upper bound for the isothermal transformation of NaCl (to a CsCl-type structure) at room temperature is 257 kbar; it is noted that the actual value may be considerably less than this.

  12. Cesium chloride compatibility testing program: Final report

    SciTech Connect

    Bryan, G.H.

    1989-11-01

    The US Department of Energy is considering the geologic disposal of the doubly encapsulated cesium chloride (CsCl) produced at the Waste Encapsulation and Storage Facility (WESF). Reliable estimates of long-term corrosion of the inner capsule material by the CsCl under repository storage conditions are needed to assess the hazards associated with geologic disposal of the fission product Cs. The Cesium Chloride Compatibility Program was carried out at PNL to obtain the short-term corrosion data required to accurately estimate long-term attack. In the compatibility tests six standard WESF CsCl capsules were placed vertically in individual insulated containers and allowed to self-heat to a nominal maximum 316L SS/CsCl interface temperature of 450{degree}C. The capsules were held at temperature for times ranging from 0.25 to 6 years. When a test was completed, the capsule was removed from the container and sectioned. Four samples were cut from the inner capsule at prescribed locations and subjected to metallographic examination. Corrosion was determined from photomicrographs of the samples. 16 refs., 41 figs., 16 tabs.

  13. The DELTA 181 lithium thionyl chloride battery

    NASA Astrophysics Data System (ADS)

    Sullivan, Ralph M.; Brown, Lawrence E.; Leigh, A. P.

    In 1986, the Johns Hopkins University/Applied Physics Laboratory (JHU/APL) undertook the development of a sensor module for the DELTA 181 spacecraft, a low earth orbit (LEO) mission of less than two months duration. A large lithium thionyl chloride battery was developed as the spacecraft's primary power source, the first known such use for this technology. The exceptionally high energy density of the lithium thionyl chloride cell was the primary driver for its use, resulting in a completed battery with a specific energy density of 120 Wh/lb. Safety requirements became the primary driver shaping all aspects of the power system design and development due to concerns about the potential hazards of this relatively new, high-energy technology. However, the program was completed without incident. The spacecraft was launched on February 8, 1988, from Kennedy Space Center (KSC) with over 60,000 Wh of battery energy. It reentered on April 2, 1988, still operating after 55 days, providing a successful, practical, and visible demonstration of the use of this technology for spacecraft applications.

  14. Picosecond dynamics from lanthanide chloride melts

    NASA Astrophysics Data System (ADS)

    Kalampounias, Angelos G.

    2012-12-01

    The picosecond dynamics of molten lanthanide chlorides is studied by means of vibrational spectroscopy. Polarized Raman spectra of molten LaCl3, NdCl3, GdCl3, DyCl3, HoCl3 and YCl3 are fitted to a model enabling to obtain the times of vibrational dephasing, tν and vibrational frequency modulation tω. Our aim is to find possible sensitive indicators of short-time dynamics. It has been found that all lanthanide chlorides exhibit qualitative similarities in the vibrational relaxation and frequency modulation times in the molten state. It appears that the vibrational correlation functions of all melts comply with the Rothschild approach assuming that the environmental modulation is described by a stretched exponential decay. The evolution of the dispersion parameter α indicates the deviation of the melts from the model simple liquid and the similar local environment in which the oscillator is placed and with which it is coupled. The "packing" of the anions around central La3+ cation seems to be the key factor for the structure and the dynamics of the melts. The results are discussed in the framework of the current phenomenological status of the field.

  15. 21 CFR 522.1862 - Sterile pralidoxime chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... Before administration of the sterile pralidoxime chloride, atropine is administered intravenously at a... milligram of atropine per pound of body weight administered intramuscularly. Then the appropriate dosage...

  16. 21 CFR 522.1862 - Sterile pralidoxime chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... Before administration of the sterile pralidoxime chloride, atropine is administered intravenously at a... milligram of atropine per pound of body weight administered intramuscularly. Then the appropriate dosage...

  17. Purification of aqueous plutonium chloride solutions via precipitation and washing.

    SciTech Connect

    Stroud, M. A.; Salazar, R. R.; Abney, Kent David; Bluhm, E. A.; Danis, J. A.

    2003-01-01

    Pyrochemical operations at Los Alamos Plutonium Facility (TA-55) use high temperature melt s of calcium chloride for the reduction of plutonium oxide to plutonium metal and hi gh temperature combined melts of sodium chloride and potassium chloride mixtures for the electrorefining purification of plutonium metal . The remaining plutonium and americium are recovered from thes e salts by dissolution in concentrated hydrochloric acid followed by either solvent extraction or io n exchange for isolation and ultimately converted to oxide after precipitation with oxalic acid . Figur e 1 illustrates the current aqueous chloride flow sheet used for plutonium processing at TA-55 .

  18. On Barium Oxide Solubility in Barium-Containing Chloride Melts

    NASA Astrophysics Data System (ADS)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V.

    2016-08-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl2-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl2-MCl systems.

  19. VOLATILE CHLORIDE PROCESS FOR THE RECOVERY OF METAL VALUES

    DOEpatents

    Hanley, W.R.

    1959-01-01

    A process is presented for recovering uranium, iron, and aluminum from centain shale type ores which contain uranium in minute quantities. The ore is heated wiih a chlorinating agent. such as chlorine, to form a volatilized stream of metal chlorides. The chloride stream is then passed through granular alumina which preferentially absorbs the volatile uranium chloride and from which the uranium may later be recovered. The remaining volatilized chlorides, chiefly those of iron and aluminum, are further treated to recover chlorine gas for recycle, and to recover ferric oxide and aluminum oxide as valuable by-products.

  20. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    PubMed

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  1. Ion chromatographic determination of chloride in mustard sauces.

    PubMed

    López Agüero, E; Bosch Bosch, N; Barrera Vázquez, C; López Ruiz, B

    1999-11-01

    A new, simple, precise, and rapid ion chromatography (IC) method has been developed to determine chloride in mustard sauces using a mixture of phthalic acid, acetone, and water adjusted to pH 5.0 as eluent. Conductometric detection was carried out. The retention time for chloride was 1.5 min. Linearity was obtained up to a concentration level of 100 mg/L NaCl. The method was statistically evaluated for accuracy and precision after being used to assay the chloride from mustard sauces. Within the same samples, the chloride levels obtained by IC were compared with the sodium concentrations quantified by atomic absorption spectrophotometry.

  2. Mild oxidation of alcohols with O-iodoxybenzoic acid (IBX) in ionic liquid 1-butyl-3-methyl-imidazolium chloride and water.

    PubMed

    Liu, Zhi; Chen, Zhen-Chu; Zheng, Qin-Guo

    2003-09-01

    [reaction: see text] A mild, efficient, and eco-friendly procedure for the oxidation of alcohols with IBX in ionic liquid [bmim]Cl and water has been developed. Simply stirring of a solution of the alcohol and IBX in [bmim]Cl/water at room temperature followed by extraction with ether or ethyl acetate and removal of the solvent gives excellent yields of the corresponding carbonyl compounds. Recycling and reuse of the oxidant and ionic liquid have also been reported.

  3. Developmental toxicity of copper chloride, methylene chloride, and 6-aminonicotinamide to embryos of the grass shrimp Palaemonetes pugio

    SciTech Connect

    Rayburn, J.R.; Fisher, W.S.

    1999-05-01

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, copper chloride, and 6-aminonicotinamide, three known teratogenic chemicals. Two exposure periods were used, 4 d and 12 d, and both periods extended through hatching. The average 4-d LC50 values for methylene chloride, copper chloride, and 6-aminonicotinamide were 0.071% v/v, 1.82 mg/L, and 0.21 mg/ml, respectively. The average 12-d LC50 values for methylene chloride, copper chloride, and 6-aminonicotinamide were 0.031% v/v, 1.44 mg/L, and 0.057 mg/ml, respectively. Eye malformations were observed with embryos exposed to concentrations greater than 3 mg/L copper chloride or greater than 0.07% v/v methylene chloride. Very few abnormalities were observed in embryos exposed to 6-aminonicotinamide. Abnormal larval development was found with exposure to copper chloride at concentrations greater than 1 mg/L. The sensitivity and low variability found here further supports the development of these relatively simple methods using grass shrimp embryos. Establishment of sublethal developmental endpoints warrants further investigation because of their potential correspondence to mechanisms of toxic action.

  4. [Gustatory sensitivity to sodium chloride and potassium chloride and certain parameters of sodium metabolism in patients with bronchial asthma].

    PubMed

    Mineev, V N; Suparnovich, I Iu

    2008-01-01

    The aim of the study was to determine threshold gustatory sensitivity (TGS) to sodium chloride and potassium chloride in patients with bronchial asthma (BA) taking into account a number of factors responsible for the enhanced risk of development and progress of this disease. Forty five practically healthy subjects were compared with 139 asthmatic patients; a separate group comprised patients treated permanently with oral glucocorticoids and those having non-pulmonary allergy. Chemically pure solutions of sodium and potassium chlorides were used in the dripping test to assess TGS. Asthmatic patients had enhanced TGS to sodium chloride compared with healthy subjects. TGS values were especially high in non-allergic bronchial asthma and minimal in allergic asthma when they were unrelated to the phase of the disease. TGS to potassium chloride in asthmatic patients also differed from that in healthy subjects; more patients were bitter-insensitive or sensitive only to high concentrations of potassium chloride. Patients treated with systemic glucocorticoids had the highest TGS to sodium chloride. Patients with non-pulmonary allergy and allergic BA had very similar TGS to potassium chloride. TGS to sodium chloride in the former was lower than in healthy subjects and patients with allergic BA. Asthmatic patients had a higher sodium ion concentration in erythrocytes than normal subjects; it reached maximum values in persons used to add salt to fully cooked food.

  5. Lead electrowinning in an acid chloride medium

    NASA Astrophysics Data System (ADS)

    Expósito, E.; Iniesta, J.; González-García, J.; Montiel, V.; Aldaz, A.

    The results of an investigation of the electrowinning of lead employing a chloride medium are reported. The electro-deposition lead reaction was studied by voltammetric methods and scanning electron microscope (SEM) microphotographs of the electro-deposited lead were taken. The effects of current density, temperature, catholyte flow and H + concentration were investigated at laboratory scale to optimise operating conditions in order to found adequate values for industrial purposes of the parameters energetic cost and production. For a working current density of 100 mA/cm 2 the current efficiency, energy consumption and production were 90%, 1.32 kW h/kg Pb and 83.4 kg Pb/m 2 per day, respectively.

  6. [Survey of plasticizers in polyvinyl chloride toys].

    PubMed

    Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2012-01-01

    Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

  7. Poly(vinyl chloride) processes and products.

    PubMed

    Wheeler, R N

    1981-10-01

    Poly(vinyl chloride) resins are produced by four basic processes: suspension, emulsion, bulk and solution polymerization. PVC suspensions resins are usually relatively dust-free and granular with varying degrees of particle porosity. PVC emulsion resins are small particle powders containing very little free monomer. Bulk PVC resins are similar to suspension PVC resins, though the particles tend to be more porous. Solution PVC resins are smaller in particle size than suspension PVC with high porosity particles containing essentially no free monomer. The variety of PVC resin products does not lend itself to broad generalizations concerning health hazards. In studying occupational hazards the particular PVC process and the product must be considered and identified in the study.

  8. Unsteady growth of ammonium chloride dendrites

    NASA Astrophysics Data System (ADS)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.

    2016-02-01

    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=сΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  9. Unsteady growth of ammonium chloride dendrites

    NASA Astrophysics Data System (ADS)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.

    2016-02-01

    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=cΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  10. Dynamics of vitreous and molten zinc chloride

    SciTech Connect

    Price, D.L.; Saboungi, M.L.; Susman, S.; Volin, K.J. ); Wright, A.C. . J.J. Thomson Physical Lab.)

    1991-09-01

    The dynamics of vitreous and molten zinc chloride have been studied with inelastic neutron scattering at the Intense Pulsed Neutron Source. The results are analyzed in terms of the scattering function S(Q,E) and the effective vibrational density of states G(E). The vibrational spectra of both glass and liquid are dominated by broad features centered at 15 and 35 MeV which are identified with F{sub 2} modes of ZnCl{sub 4}{sup 2{minus}} tetrahedra. The other two normal modes are not observed because of inadequate resolution and broadening and overlap resulting from coupling between tetrahedra. The behavior of ZnCl{sub 2} is contrasted with other tetrahedrally coordinated glasses that have been studied with the same technique. 15 refs,. 5 figs., 1 tab.

  11. Unexpected Stable Stoichiometries of Sodium Chlorides

    NASA Astrophysics Data System (ADS)

    Zhang, Weiwei; Oganov, Artem R.; Goncharov, Alexander F.; Zhu, Qiang; Boulfelfel, Salah Eddine; Lyakhov, Andriy O.; Stavrou, Elissaios; Somayazulu, Maddury; Prakapenka, Vitali B.; Konôpková, Zuzana

    2013-12-01

    Sodium chloride (NaCl), or rocksalt, is well characterized at ambient pressure. As a result of the large electronegativity difference between Na and Cl atoms, it has highly ionic chemical bonding (with 1:1 stoichiometry dictated by charge balance) and B1-type crystal structure. By combining theoretical predictions and diamond anvil cell experiments, we found that new materials with different stoichiometries emerge at high pressures. Compounds such as Na3Cl, Na2Cl, Na3Cl2, NaCl3, and NaCl7 are theoretically stable and have unusual bonding and electronic properties. To test this prediction, we synthesized cubic and orthorhombic NaCl3 and two-dimensional metallic tetragonal Na3Cl. These experiments establish that compounds violating chemical intuition can be thermodynamically stable even in simple systems at nonambient conditions.

  12. Processing of mercurous chloride in space

    NASA Astrophysics Data System (ADS)

    Watson, C.; Singh, N. B.; Thomas, A.; Nelson, A. E.; Rolin, T. O.; Griffin, J.; Haulenbeek, G.; Daniel, N.; Seaquist, J.; Cacioppo, C.; Weber, Jerry; Zugrav, Maria I.; Naumann, R. J.

    1997-07-01

    Mercurous chloride is an acoustical optical material with an unusually low acoustic velocity and high acousto-optical figure of merit, which makes it an interesting candidate for optical delay lines and Bragg cells for optical signal processors. It also has a broad range of spectral transmissivity which makes it an ideal candidate for wide band acoustically tuned optical filter (ATOF) applications. Single crystals of this material can be readily grown in normal gravity by closed-tube physical vapor transport, but the crystals appear to contain structural inhomogeneities which degrade the optical performance. The nature of these defects is not known, but their degree appears to correlate with the Rayleigh number that characterizes their growth; hence, it is suspected that uncontrolled convection may play a role in the defect structure. This prompted a space flight experiment to determine if these defects could be further reduced by virtually eliminating the buoyancy-driven convective flows which are always present to a degree in normal gravity. Single crystals of mercurous chloride (Hg2Cl2) were grown in the Space Experiment Facility (SEF) transparent furnace developed by the University of Alabama in Huntsville, Consortium for Materials Development in Space. The Northrop- Grumman Science and Technology Center provided the highly purified starting material and analyzed the crystals that were grown. This experiment was flown on Spacehab 4 (STS-77) in May 1996. The SEF is a transparent furnace which allowed the progress of the growth to be recorded by video. Extensive furnace profiling and modeling has been carried out to relate the growth front location to the thermal environment and to the crystal quality. The results of the flight experiment as well as the ground control experiments are presented.

  13. Pharmacodynamics of benzyl chloride in rats.

    PubMed

    Saxena, S; Abdel-Rahman, M S

    1989-09-01

    In today's world of high industrialization, toxicity and pollution have become common terms of references. Both laymen and experts are becoming increasingly concerned about various health hazards created by occupational and industrial wastes dumped in and around public places. Benzyl chloride (BCl) was one of the chemicals dumped by Hooker Chemicals in Love Canal, N.Y. Benzyl chloride (BCl) is extensively used in industry in the manufacture of dyes, perfumes, resins, and synthetic tannins. It has been found at various dump sites and industrial wastes, which has led to potential hazards to health. This study was conducted to investigate the pharmacodynamics of BCl in rats. Rats were given 14C-BCl in corn oil by gavage. The peak plasma level was reached at 30 min and began to decline. BCl elimination pattern follows a two compartment model. The distribution half-life (alpha-phase) was 1.3 hr while the half-life of elimination (beta-phase) was 58.53 hr. Distribution studies after 48 hr of BCl administration revealed that the concentration of radioisotopes was highest in the stomach, gastric content, ileum, and duodenum followed by liver, adrenal, bone marrow, whole blood, pancreas, lung, esophagus, skin, kidney, heart, thymus, fat, testes, spleen, brain, and carcass. Approximately 76% of the initial dose was excreted by kidney during the 72 hr studies. About 7% was detected in expired air as 14CO2, while less than 1.3% was present as 14C-BCl or 14C-BCl metabolites in expired air during 72 hr. Metabolism studies revealed that S-benzyl-N-acetyl cysteine, benzyl alcohol, and benzaldehyde were the metabolites present in the urine.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2802671

  14. The electrowinning of copper from a cupric chloride solution

    NASA Astrophysics Data System (ADS)

    Lin, H. K.; Wu, X. J.; Rao, P. D.

    1991-08-01

    In this work, the Eh pCl diagram of the CuCl-H2O system was established, and the kinetics of copper dissolution in cupric chloride solution were studied with an emphasis on possible difficulties that may occur during copper electrowinning. The results were used to guide an investigation of copper electrowinning from cupric chloride solution.

  15. TOXICOLOGY OF MONO- AND DI-ALKYLTIN CHLORIDES

    EPA Science Inventory

    Mono- and di-alkyltin chlorides are reactive compounds used in the production of stabilizers for polyvinyl chloride (PVC) plastics, primarily used for water distribution pipes. Health effects data were compiled or developed by the manufacturers for the EPA's HPV Challenge progra...

  16. TOXICOLOGY OF MONO- AND DI-ALKYLTIN CHLORIDES.

    EPA Science Inventory

    Mono- and di-alkyltin chlorides are reactive compounds used in the production of stabilizers for polyvinyl chloride (PVC) plastics, primarily used for water distribution pipes. Health effects data were compiled or developed by the manufacturers for the EPA's HPV Challenge progra...

  17. Calcium chloride: a new solution for frozen coal

    SciTech Connect

    Boley, D.G.

    1984-01-01

    Proved in emergency situations as fast and economical, calcium chloride can be used in conjunction with other techniques for effective prevention of coal freezing. Calcium chloride solution depresses the freezing point, and should the temperature drop below this point, the ice that does form has a far lower compressive strength than ice normally exhibits.

  18. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  19. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    ERIC Educational Resources Information Center

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  20. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride solution... solution must be lined with rubber, corrosion resistant plastic, or a material approved by the...

  1. 46 CFR 151.50-75 - Ferric chloride solution.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Ferric chloride solution. 151.50-75 Section 151.50-75... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-75 Ferric chloride solution... solution must be lined with rubber, corrosion resistant plastic, or a material approved by the...

  2. Molybdenum In Cathodes Of Sodium/Metal Chloride Cells

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Attia, Alan I.; Halpert, Gerald

    1992-01-01

    Cyclic voltammetric curves of molybdenum wire in NaAlCl4 melt indicate molybdenum chloride useful as cathode material in rechargeable sodium/metal chloride electrochemical cells. Batteries used in electric vehicles, for electric-power load leveling, and other applications involving high energy and power densities.

  3. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  4. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  5. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  6. Behavior and products of mechano-chemical dechlorination of polyvinyl chloride and poly (vinylidene chloride).

    PubMed

    Xiao, Xiao; Zeng, Zigao; Xiao, Songwen

    2008-02-28

    The mechano-chemical (MC) dechlorination of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) was performed by mechanical milling PVC/PVDC powder with zinc powder in a planetary ball mill, and the products of dechlorination were characterized by Infrared spectra (IR), X-ray diffraction (XRD), Raman spectroscopy, gas chromatography-mass spectrometry (GC-MS), and 13C solid-state nuclear magnetic resonance (NMR). The experimental results show that PVC/PVDC can be easily dechlorinated by milling with zinc powder, and formed various kinds of inorganic and organic products. Inorganic compounds included Zn2OCl(2).2H2O, Zn5(OH)8Cl2.H2O etc., and organic products involved diamond-like carbon, carbyne fragment, polyacetylene etc. Organic products formed following the paths of dechlorination, dehydrochlorination, crosslink, and oxidation. The mechano-chemical dechlorination process of PVC/PVDC may be an effective approach for carbyne synthesizing in the appropriate condition.

  7. Review of pulmonary effects of poly(vinyl chloride) and vinyl chloride exposure.

    PubMed

    Lilis, R

    1981-10-01

    The contributions of several recent reports to the definition of pulmonary effects of PVC dust inhalation are reviewed. Granulomatous reaction, with inclusion of PVC particles in macrophages and histocytes, and associated interstitial pulmonary fibrosis have been found to lead to exertional dyspnoea, diffuse micronodular chest radiographic opacities and restrictive pulmonary dysfunction. The effects of vinyl chloride (VC) monomer (gas) on proteins and the immunologic mechanisms triggered by the altered protein are possible mechanisms for the development in some cases of interstitial pulmonary fibrosis secondary to VC exposure. Vinyl chloride, a confirmed carcinogen, has been associated with, among other malignant tumors, a significant increase in the incidence of lung cancer. The magnitude of this effect has not yet been completely evaluated.

  8. Measurements of the partial electronic conductivity in lithium chloride - potassium chloride molten salts

    SciTech Connect

    Reynolds, G.J.; Huggins, R.A.; Lee, M.C.Y.

    1983-05-01

    The partial electronic conductivity of the lithium chloride-potassium chloride eutectic molten salt electrolyte has been studied as a function of lithium activity, temperature and melt composition using the Wagner asymmetric d-c polarization technique. Measurements were made over the temperature range 383-465/sup 0/C and at lithium activities extending from 1.95 X 10/sup -7/ to unity. The results confirmed the applicability of this technique to molten salt systems. The partial electronic conductivity was shown to be much greater than the partial hole conductivity over the range of lithium activities investigated, and was found to increase monotonically with temperature and lithium activity, but decreased on addition of excess LiCl to the eutectic composition. Approximate values of self-discharge currents for cells utilizing an ''Al/LiAl'' negative electrode and a LiCl-KCl molten salt electrolyte have been calculated.

  9. Determination of the heat capacities of Lithium/BCX (bromide chloride in thionyl chloride) batteries

    NASA Technical Reports Server (NTRS)

    Kubow, Stephen A.; Takeuchi, Kenneth J.; Takeuchi, Esther S.

    1989-01-01

    Heat capacities of twelve different Lithium/BCX (BrCl in thionyl chloride) batteries in sizes AA, C, D, and DD were determined. Procedures and measurement results are reported. The procedure allowed simple, reproducible, and precise determinations of heat capacities of industrially important Lithium/BCX cells, without interfering with performance of the cells. Use of aluminum standards allowed the accuracy of the measurements to be maintained. The measured heat capacities were within 5 percent of calculated heat capacity values.

  10. [Properties of benzethonium chloride in micellar solutions and the effect of added sodium chloride].

    PubMed

    Kopecký, F; Kopecká, B; Kaclík, P

    2006-07-01

    Aqueous solutions of the antimicrobially effective quaternary ammonium salt benzethonium chloride (hyamine 1622) were studied using UV spectrophotometry and partially conductometry. The spectra of micellar solutions of benzethonium chloride revealed a concentration-dependent bathochromic and hyperchromic shift of a weak UV absorption band in the region 250-300 nm. This served to elaborate the spectrophotometric determination of the critical micellar concentration (CMC) of benzethonium chloride and the concentration of free benzethonium cations in micellar solutions without an addition of NaCl and with a constant addition of NaCl 0.003, 0.1 and 0.15 mol/l. Premicellar associations were not observed and in NaCl-free solutions CMC 0.0028 mol/l was spectrophotometrically determined. An addition of NaCl resulted in an increased hyperchromic effect and strengthening of micellization, manifested by a more than ten-times decrease in the CMC as well as the concentration of free benzethonium cations in micellar solutions. The courses of the determined concentrations of free benzethonium cations in the solutions both without and with the presence of NaCl were quite similar; their maximal values were always just a little higher than the corresponding CMC and with a further growth of the total concentration of benzethonium chloride there was, on the other hand, a marked decrease in the concentration of its free cations in micellar solution. Possible effects of a decreased concentration of free benzethonium cations due to an added electrolyte on antimicrobial activity and formation of ionic pairs are discussed.

  11. Conversion of bacteriorhodopsin into a chloride ion pump

    SciTech Connect

    Sasaki, J.; Chon, Y.S.; Kandori, H.

    1995-07-07

    In the light-driven proton pump bacteriorhodopsin, proton transfer from the retinal Schiff base to aspartate-85 is the crucial reaction of the transport cycle. In halorhodopsin, a light-driven chloride ion pump, the equivalent of residue 85 is threonine. When aspartate-85 was replaced with threonine, the mutated bacteriorhodopsin became a chloride ion pump when expressed in Halobacterium salinarium and, like halorhodopsin, actively transported chloride ions in the direction opposite from the proton pump. Chloride was bound to it, as revealed by large shifts of the absorption maximum of the chromophore, and its photointermediates included a red-shifted state in the millisecond time domain, with its amplitude and decay rate dependent on chloride concentration. Bacteriorhodopsin and halorhodopsin thus share a common transport mechanism, and the interaction of residue 85 with the retinal Schiff base determines the ionic specificity. 28 refs., 4 figs.

  12. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, Candido

    1999-01-01

    A method for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700.degree. C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite.

  13. Method for synthesizing pollucite from chabazite and cesium chloride

    DOEpatents

    Pereira, C.

    1999-02-23

    A method is described for immobilizing waste chlorides salts containing radionuclides and hazardous nuclear material for permanent disposal, and in particular, a method is described for immobilizing waste chloride salts containing cesium, in a synthetic form of pollucite. The method for synthesizing pollucite from chabazite and cesium chloride includes mixing dry, non-aqueous cesium chloride with chabazite and heating the mixture to a temperature greater than the melting temperature of the cesium chloride, or above about 700 C. The method further comprises significantly improving the rate of retention of cesium in ceramic products comprised of a salt-loaded zeolite by adding about 10% chabazite by weight to the salt-loaded zeolite prior to conversion at elevated temperatures and pressures to the ceramic composite. 3 figs.

  14. Atmospheric corrosion and chloride deposition on metal surfaces

    SciTech Connect

    Matthes, Steven A.; Holcomb, Gordon R.; Cramer, Stephen D.; Covino, Bernard S., Jr.; Bullard, Sophie J.

    2004-01-01

    Atmospheric corrosion and chloride deposition on metal surfaces was studied at an unpolluted coastal (marine) site, an unpolluted rural inland site, and a polluted urban site. Chloride deposition by both wet (precipitation) and dry deposition processes over a multi-year period was measured using ion chromatography analysis of incident precipitation and precipitation runoff from the surface of metal samples. Chloride deposition was measured on zinc, copper, lead, mild steel, and non-reactive blank panels, as well as two panels coated with thermal-sprayed zinc alloys. Chloride deposition measured by runoff chemistry was compared with chloride deposition measurements made by the ASTM wet candle technique. Corrosion mass loss as a function of distance from the ocean is presented for copper and mild steel in bold exposures on the west coast.

  15. Apparatus and method for making metal chloride salt product

    DOEpatents

    Miller, William E.; Tomczuk, Zygmunt; Richmann, Michael K.

    2007-05-15

    A method of producing metal chlorides is disclosed in which chlorine gas is introduced into liquid Cd. CdCl.sub.2 salt is floating on the liquid Cd and as more liquid CdCl.sub.2 is formed it separates from the liquid Cd metal and dissolves in the salt. The salt with the CdCl.sub.2 dissolved therein contacts a metal which reacts with CdCl.sub.2 to form a metal chloride, forming a mixture of metal chloride and CdCl.sub.2. After separation of bulk Cd from the salt, by gravitational means, the metal chloride is obtained by distillation which removes CdCl.sub.2 and any Cd dissolved in the metal chloride.

  16. Monoclonal Antibodies to the Apical Chloride Channel in Necturus Gallbladder Inhibit the Chloride Conductance

    NASA Astrophysics Data System (ADS)

    Finn, Arthur L.; Tsai, Lih-Min; Falk, Ronald J.

    1989-10-01

    Monoclonal antibodies raised by injecting Necturus gallbladder cells into mice were tested for their ability to inhibit the apical chloride conductance induced by elevation of cellular cAMP. Five of these monoclonal antibodies bound to the apical cells, as shown by indirect immunofluorescence microscopy, and inhibited the chloride conductance; one antibody that bound only to subepithelial smooth muscle, by indirect immunofluorescence microscopy, showed no inhibition of chloride transport. The channel or a closely related molecule is present in the membrane whether or not the pathway is open, since, in addition to inhibiting the conductance of the open channel, the antibody also bound to the membrane in the resting state and prevented subsequent opening of the channel. The antibody was shown to recognize, by ELISA, epitopes from the Necturus gallbladder and small intestine. Finally, by Western blot analysis of Necturus gallbladder homogenates, the antibody was shown to recognize two protein bands of Mr 219,000 and Mr 69,000. This antibody should permit isolation and characterization of this important ion channel.

  17. Acute lethal and teratogenic effects of tributyltin chloride and copper chloride on mahi mahi (Coryphaena hippurus) eggs and larvae.

    PubMed

    Adema-Hannes, Rachel; Shenker, Jonathan

    2008-10-01

    Acute and chronic bioassays were used to evaluate the lethal and sublethal effects of copper chloride and tributyltin chloride on mahi mahi (Coryphaena hippurus) embryos, a pelagic life stage often found in the surface microlayer where anthropogenic contaminants can accumulate. Acute bioassay testing determined the median lethal concentration (LC50) for the test organism after 48 h of exposure. Chronic toxicity tests were used to determine the measurement of sublethal parameters, such as developmental abnormalities after 72-h exposures to the toxicants. Embryos were collected 4 h postfertilization and subsequently exposed to 1, 5, 25, 50, and 100 microg/L of copper chloride and 3, 10, 20, 30, and 50 microg/L of tributyltin chloride. Analysis of hatch rate percentage determined that the mean 48-h LC50 of copper chloride and tributyltin chloride was 32.8 and 16.7 microg/L, respectively, based on the pooled data of four experiments with four replicates for each metal. Consistent abnormalities, such as yolk sac swelling, spinal deformities, and decreased hatch rates, were observed for each metal. Teratogenic responses to copper chloride and tributyltin chloride demonstrate the need to investigate further the impacts of pollution in the open oceans to a species indigenous to, and commercially important to, the Florida (USA) coasts. This information could then lead to the future development of a surface microlayer bioassay using mahi mahi embryos. PMID:18419170

  18. Acetogenic microbial degradation of vinyl chloride

    USGS Publications Warehouse

    Bradley, P.M.; Chapelle, F.H.

    2000-01-01

    Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C- acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries, respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and humic acids- reducing conditions.Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C-acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and

  19. Fate and effects of methylene chloride in activated sludge.

    PubMed Central

    Klecka, G M

    1982-01-01

    Activated sludge obtained from a municipal wastewater treatment plant was acclimated to methylene chloride at concentrations between 1 and 100 mg/liter by continuous exposure to the compound for 9 to 11 days. Acclimated cultures were shown to mineralize methylene chloride to carbon dioxide and chloride. Rates of methylene chloride degradation were 0.14, 2.3, and 7.4 mg of CH2Cl2 consumed per h per g of mixed-liquor suspended solids for cultures incubated in the presence of 1, 10, and 100 mg/liter, respectively. Concentrations of methylene chloride between 10 and 1,000 mg/liter had no significant effect on O2 consumption or glucose metabolism by activated sludge. A hypothetical model was developed to examine the significance of volatilization and biodegradation for the removal of methylene chloride from an activated sludge reactor. Application of the model indicated that the rate of biodegradation was approximately 12 times greater than the rate of volatilization. Thus, biodegradation may be the predominant process determining the fate of methylene chloride in activated sludge systems continuously exposed to the compound. PMID:7138008

  20. Chlormequat chloride retards rat embryo growth in vitro.

    PubMed

    Xiagedeer, Bayindala; Wu, Shuang; Liu, Yingjuan; Hao, Weidong

    2016-08-01

    Chlormequat chloride is the most widely used plant growth regulator in agriculture to promote sturdier growth of grain crops by avoidance of lodging. Therefore, human exposure to chlormequat chloride is very common, but its developmental toxicity has not been studied. Thus, we investigated the developmental toxicity of chlormequat chloride by applying rat whole embryo culture (WEC) model, limb bud micromass culture and 3T3 fibroblast cytotoxicity test. Chlormequat chloride at 150μg/ml (0.93mM) retarded the rat embryo growth without causing significant morphological malformations and at 500μg/ml (3.1mM) caused both retardation and morphological malformation of the embryos. However, the proliferation and differentiation of limb bud cells were not affected by chlormequat chloride at as high as up to 1000μg/ml (6.2mM) applied. This concentration of chlormequat chloride did not affect the cell viability as examined by 3T3 fibroblast cytotoxicity test either, suggesting that cellular toxicity may not play a role in chlormequat induced inhibition of rat embryo growth. Collectively, our results demonstrated that chlormequat chloride may affect embryo growth and development without inhibiting cell viability.

  1. Strong emission of methyl chloride from tropical plants.

    PubMed

    Yokouchi, Yoko; Ikeda, Masumi; Inuzuka, Yoko; Yukawa, Tomohisa

    2002-03-14

    Methyl chloride is the largest natural source of ozone-depleting chlorine compounds, and accounts for about 15 per cent of the present atmospheric chlorine content. This contribution was likely to have been relatively greater in pre-industrial times, when additional anthropogenic sources-such as chlorofluorocarbons-were absent. Although it has been shown that there are large emissions of methyl chloride from coastal lands in the tropics, there remains a substantial shortfall in the overall methyl chloride budget. Here we present observations of large emissions of methyl chloride from some common tropical plants (certain types of ferns and Dipterocarpaceae), ranging from 0.1 to 3.7 microg per gram of dry leaf per hour. On the basis of these preliminary measurements, the methyl chloride flux from Dipterocarpaceae in southeast Asia alone is estimated at 0.91 Tg yr-1, which could explain a large portion of missing methyl chloride sources. With continuing tropical deforestation, natural sources of chlorine compounds may accordingly decrease in the future. Conversely, the abundance of massive ferns in the Carboniferous period may have created an atmosphere rich in methyl chloride.

  2. An Apical-Membrane Chloride Channel in Human Tracheal Epithelium

    NASA Astrophysics Data System (ADS)

    Welsh, Michael J.

    1986-06-01

    The mechanism of chloride transport by airway epithelia has been of substantial interest because airway and sweat gland-duct epithelia are chloride-impermeable in cystic fibrosis. The decreased chloride permeability prevents normal secretion by the airway epithelium, thereby interfering with mucociliary clearance and contributing to the morbidity and mortality of the disease. Because chloride secretion depends on and is regulated by chloride conductance in the apical cell membrane, the patch-clamp technique was used to directly examine single-channel currents in primary cultures of human tracheal epithelium. The cells contained an anion-selective channel that was not strongly voltage-gated or regulated by calcium in cell-free patches. The channel was also blocked by analogs of carboxylic acid that decrease apical chloride conductance in intact epithelia. When attached to the cell, the channel was activated by isoproterenol, although the channel was also observed to open spontaneously. However, in some cases, the channel was only observed after the patch was excised from the cell. These results suggest that this channel is responsible for the apical chloride conductance in airway epithelia.

  3. Urinary sodium and chloride during renal salt retention.

    PubMed

    Sherman, R A; Eisinger, R P

    1983-09-01

    One hundred ten episodes of renal salt retention (urinary sodium and/or chloride less than 10 mEq/L) were studied retrospectively to determine the significance of discordance of urinary sodium from chloride. In 16 episodes the urinary sodium exceeded chloride by at least 15 mEq/L. This disparity was associated with the necessity for urinary excretion of substantial quantities of poorly reabsorbed anions (penicillin, ketones, or diatrizoate), a rapidly falling serum bicarbonate level (due to resolving metabolic or developing respiratory alkalosis), or substantial renal insufficiency (serum creatinine greater than 3 mg/dL). In 14 of 110 episodes, urinary chloride exceeded urinary sodium by at least 15 mEq/L. These patients were more often oliguric and had a higher mean serum chloride than patients without this dissociation. In patients with oliguria, hyponatremia, or metabolic alkalosis, measurement of urinary sodium or chloride alone will, in a substantial number of cases, fail to detect renal salt retention. When evidence is sought for renal salt retention, both urinary sodium and chloride should be determined. PMID:6613992

  4. Anomalous chloride flux discharges from Yellowstone National Park

    USGS Publications Warehouse

    Friedman, I.; Norton, D.R.

    1990-01-01

    The chloride concentration of some thermal springs in and adjacent to Yellowstone National Park is constant through time although their discharge varies seasonally. As a result the chloride flux from these springs increases during periods of increased discharge. We believe that this is caused by changes in the height of the local groundwater table, which affects the discharge of the springs but not their chloride concentration. The discharge from Mammoth Hot Springs varies seasonally, but its chloride concentration remains constant. We take this as evidence that this major thermal feature is derived from orifices that are tapping the local water table close to its surface. Three of the four major rivers (Yellowstone, Snake and Falls) exiting the Park also show an increased chloride flux during the spring runoff that cannot be explained solely by the contribution of snowmelt, nor by release of hot-spring-derived chloride stored in the soil during the winter and released in the spring. The increased chloride flux in these rivers is attributed to their draining shallow hot springs similar to those mentioned above. In contrast to the Yellowstone, Snake and Falls Rivers, the Firehole and Gibbon Rivers, which unite to form the Madison River and which collectively drain several major geyser basins, display a poor correlation between chloride flux and discharge. The cause, we believe, is that a large part of the thermal water input to these two rivers originated at great depths where the seasonal variation in the height of the water table had a negligible effect on hot spring discharge. Monitoring of seasonal discharge and chloride concentration of thermal features yields information on the depths at which these thermal features tap the local water table. ?? 1990.

  5. [Effect of methylrosanilinium chloride to MRSA nasal carriers].

    PubMed

    Ogino, J; Murakami, Y; Yamada, T

    1992-03-01

    Since the end of 1987, we have noticed an increasing incidence of Methicillin resistant Staphylococcus aureus (MRSA) among the inpatients of Yamanashi Medical College Hospital. MRSA strains were identified in 70-80 percent of the specimens obtained from patients with Staphylococcus aureus. From 1988 we performed yearly bacteriological examinations of the nares of medical personnel at Yamanashi Medical College Hospital. We treated nasal carriers with OFLX drop lotion or Povidone-iodine applied to the nares. In 1991 we treated eight nasal carriers, who had been unsuccessfully treated with Povidone-iodine, with 0.01% Methylrosanilinium Chloride ointment which was applied to the nares once a day for two weeks. A post-bacteriological examination again revealed that MRSA vanished from the nares of six nasal carriers. The minimum inhibitory concentration (MIC) of Methylrosanilinium Chloride was determined by the agar plate dilution method. The 100% MICs of MSSA were 1.0 microgram/ml and of MRSA were 1.0 microgram/ml by Methylrosanilinium Chloride. Moreover we examined the MICs of Methylrosanilinium Chloride against MRSA under the existing 5% Albumin, and consequently the 100% MICs were 4.0 micrograms/ml. Therefore a 0.01% Methylrosanilinium Chloride has sufficient efficacy against MRSA. The reaction of the skin and nasal mucosa to Methylrosanilinium Chloride was examined by using three groups of guinea pigs. 0.1% and 0.01% Methylrosanilinium Chloride ointment and hydrophylic poloid were applied to the nares and skin once a day for two weeks. Post-observation with an opticmicroscope revealed no significant findings. Methylrosanilinium Chloride shows good anti-Staphylococcus aureus ability. Further investigation is needed to determine if Methylrosanilinium Chloride has additional clinical application.

  6. Chloride transport across placental microvillous membranes measured by fluorescence

    SciTech Connect

    Illsley, N.P.; Glaubensklee, C.; Davis, B.; Verkman, A.S. )

    1988-12-01

    Chloride transport across human placental microvillous vesicle membrane was investigated using the fluorescent probe SPQ (6-methoxy-N(3-sulfopropyl)quinolinium). Chloride influx (J{sub Cl}) was calculated from the initial rate of quenching of intravesicular SPQ fluorescence by chloride. J{sub Cl} measured by SPQ fluorescence was not significantly different from J{sub Cl} measured by uptake of {sup 36}Cl; SPQ did not affect measurements of J{sub Cl}. J{sub Cl} was increased 51% by a 58-mV membrane potential. Voltage-stimulated J{sub Cl} showed a saturable dependence on chloride concentration with a dissociation constant (K{sub d}) of 18 {plus minus} 5 mM and was inhibited by diphenylamine-2-carboxylate with an apparent inhibitory constant of 0.13 {plus minus} 0.03 mM. The activation energy calculated for voltage-stimulated J{sub Cl} was 4.6 {plus minus} 0.6 kcal/mol. J{sub Cl} was also stimulated by a reduction in the external pH from 7.0 to 5.5 (internal pH = 70). pH-stimulated chloride influx was increased by trans-HCO{sub 3} and was inhibited by dihydro-4,4{prime}-diisothiocyano-2,2{prime}-disulfonic stilbene. Uptake of {sup 36}Cl into microvillous vesicles was stimulated by trans-Cl. pH-stimulated J{sub Cl} showed a saturable dependence on chloride with a K{sub d} of 38 {plus minus} 6 mM but was not affected by membrane potential. No evidence was found for Na- or K-coupled chloride cotransport. These findings demonstrate the presence of a saturable chloride conductance and an electroneutral chloride-bicarbonate exchanger in the placental microvillous membrane.

  7. Anomalous chloride flux discharges from Yellowstone National Park

    NASA Astrophysics Data System (ADS)

    Friedman, Irving; Norton, Daniel R.

    1990-08-01

    The chloride concentration of some thermal springs in and adjacent to Yellowstone National Park is constant through time although their discharge varies seasonally. As a result the chloride flux from these springs increases during periods of increased discharge. We believe that this is caused by changes in the height of the local groundwater table, which affects the discharge of the springs but not their chloride concentration. The discharge from Mammoth Hot Springs varies seasonally, but its chloride concentration remains constant. We take this as evidence that this major thermal feature is derived from orifices that are tapping the local water table close to its surface. Three of the four major rivers (Yellowstone, Snake and Falls) exiting the Park also show an increased chloride flux during the spring runoff that cannot be explained solely by the contribution of snowmelt, nor by release of hot-spring-derived chloride stored in the soil during the winter and released in the spring. The increased chloride flux in these rivers is attributed to their draining shallow hot springs similar to those mentioned above. In contrast to the Yellowstone, Snake and Falls Rivers, the Firehole and Gibbon Rivers, which unite to form the Madison River and which collectively drain several major geyser basins, display a poor correlation between chloride flux and discharge. The cause, we believe, is that a large part of the thermal water input to these two rivers originated at great depths where the seasonal variation in the height of the water table had a negligible effect on hot spring discharge. Monitoring of seasonal discharge and chloride concentration of thermal features yields information on the depths at which these thermal features tap the local water table.

  8. Regulation of neuronal chloride homeostasis by neuromodulators.

    PubMed

    Mahadevan, Vivek; Woodin, Melanie A

    2016-05-15

    KCC2 is the central regulator of neuronal Cl(-) homeostasis, and is critical for enabling strong hyperpolarizing synaptic inhibition in the mature brain. KCC2 hypofunction results in decreased inhibition and increased network hyperexcitability that underlies numerous disease states including epilepsy, neuropathic pain and neuropsychiatric disorders. The current holy grail of KCC2 biology is to identify how we can rescue KCC2 hypofunction in order to restore physiological levels of synaptic inhibition and neuronal network activity. It is becoming increasingly clear that diverse cellular signals regulate KCC2 surface expression and function including neurotransmitters and neuromodulators. In the present review we explore the existing evidence that G-protein-coupled receptor (GPCR) signalling can regulate KCC2 activity in numerous regions of the nervous system including the hypothalamus, hippocampus and spinal cord. We present key evidence from the literature suggesting that GPCR signalling is a conserved mechanism for regulating chloride homeostasis. This evidence includes: (1) the activation of group 1 metabotropic glutamate receptors and metabotropic Zn(2+) receptors strengthens GABAergic inhibition in CA3 pyramidal neurons through a regulation of KCC2; (2) activation of the 5-hydroxytryptamine type 2A serotonin receptors upregulates KCC2 cell surface expression and function, restores endogenous inhibition in motoneurons, and reduces spasticity in rats; and (3) activation of A3A-type adenosine receptors rescues KCC2 dysfunction and reverses allodynia in a model of neuropathic pain. We propose that GPCR-signals are novel endogenous Cl(-) extrusion enhancers that may regulate KCC2 function. PMID:26876607

  9. Antibiotic bonding to polytetrafluoroethylene with tridodecylmethylammonium chloride

    SciTech Connect

    Harvey, R.A.; Alcid, D.V.; Greco, R.S.

    1982-09-01

    Polytetrafluoroethylene (PTFE) treated with the cationic surfactant, triodecylmethylammonium chloride (TDMAC), binds /sup 14/C-penicillin (1.5 to 2 mg antibiotic/cm graft), whereas untreated PTFE or PTFE treated with anionic detergents shows little binding of antibiotic. TDMAC-treated PTFE concomitantly binds penicillin and heparin, generating a surface that potentially can resist both infection and thrombosis. The retention of these biologically active molecules is not due to passive entrapment in the PTFE but reflects an ionic interaction between the anionic ligands and surface-bound TDMAC. Penicillin bound to PTFE is not removed by exhaustive washing in aqueous buffers but is slowly released in the presence of plasma or when the PTFE is placed in a muscle pouch in the rat. Muscle tissue adjacent to the treated PTFE shows elevated levels of antibiotic following implantation. PTFE treated with TDMAC and placed in a muscle pouch binds /sup 14/C-penicillin when it is locally irrigated with antibiotic or when penicillin is administered intravenously. Thus, the TDMAC surface treated either in vitro or in vivo with penicillin provides an effective in situ source for the timed release of antibiotic.

  10. The leaching of chalcopyrite with cupric chloride

    NASA Astrophysics Data System (ADS)

    Hirato, Tetsuji; Majima, Hiroshi; Awakura, Yasuhiro

    1987-03-01

    A comparative study of electrochemical leaching and chemical leaching of chalcopyrite was performed mainly at 343 K to elucidate the leaching mechanism of chalcopyrite with CuCl2. Also, the morphology of the leached chalcopyrite surface was studied by using a single chalcopyrite crystal. The leaching with CuCl2 produced a porous elemental sulfur layer on the chalcopyrite surface, showing a similar morphology to that produced during leaching with FeCl3. The leaching kinetics were found to be linear over an extended period, followed by an acceleration stage, as a result of an increase in the reaction surface area. The leaching rate of chalcopyrite was proportional to C(CuCl2)0.5, whereas it was inversely proportional to C(CuCl)0.5. The mixed potential of chalcopyrite exhibited a 66 mV decade-1 dependency upon C(CuCl2), and—69 mV decade-1 upon C(CuCl). Based on these observations together with other findings, an electrochemical mechanism involving the oxidation of chalcopyrite and CuCl{-/2} and the reduction of CuCl+ was proposed. The Tafel plot between the mixed potential and the current density obtained by converting the rate of chemical leaching gave a straight line whose slope was in good agreement with that of the electrochemical leaching. These findings strongly support the electrochemical mechanism of chalcopyrite leaching with cupric chloride.

  11. Ferric Chloride-induced Murine Thrombosis Models.

    PubMed

    Li, Wei; Nieman, Marvin; Sen Gupta, Anirban

    2016-01-01

    Arterial thrombosis (blood clot) is a common complication of many systemic diseases associated with chronic inflammation, including atherosclerosis, diabetes, obesity, cancer and chronic autoimmune rheumatologic disorders. Thrombi are the cause of most heart attacks, strokes and extremity loss, making thrombosis an extremely important public health problem. Since these thrombi stem from inappropriate platelet activation and subsequent coagulation, targeting these systems therapeutically has important clinical significance for developing safer treatments. Due to the complexities of the hemostatic system, in vitro experiments cannot replicate the blood-to-vessel wall interactions; therefore, in vivo studies are critical to understand pathological mechanisms of thrombus formation. To this end, various thrombosis models have been developed in mice. Among them, ferric chloride (FeCl3) induced vascular injury is a widely used model of occlusive thrombosis that reports platelet activation and aggregation in the context of an aseptic closed vascular system. This model is based on redox-induced endothelial cell injury, which is simple and sensitive to both anticoagulant and anti-platelets drugs. The time required for the development of a thrombus that occludes blood flow gives a quantitative measure of vascular injury, platelet activation and aggregation that is relevant to thrombotic diseases. We have significantly refined this FeCl3-induced vascular thrombosis model, which makes the data highly reproducible with minimal variation. Here we describe the model and present representative data from several experimental set-ups that demonstrate the utility of this model in thrombosis research. PMID:27684194

  12. Chloride Regulation in the Pain Pathway

    PubMed Central

    Price, Theodore J; Cervero, Fernando; Gold, Michael S; Hammond, Donna L; Prescott, Steven A

    2009-01-01

    Melzack and Wall’s Gate Control Theory of Pain laid the theoretical groundwork for a role of spinal inhibition in endogenous pain control. While the Gate Control Theory was based on the notion that spinal inhibition is dynamically regulated, mechanisms underlying the regulation of inhibition have turned out to be far more complex than Melzack and Wall could have ever imagined. Recent evidence indicates that an exquisitely sensitive form of regulation involves changes in anion equilibrium potential (Eanion), which subsequently impacts fast synaptic inhibition mediated GABAA, and to a lesser extent, glycine receptor activation, the prototypic ligand gated anion channels. The cation-chloride co-transporters (in particular NKCC1 and KCC2) have emerged as proteins that play a critical role in the dynamic regulation of Eanion which in turn appears to play a critical role in hyperalgesia and allodynia following peripheral inflammation or nerve injury. This review summarizes the current state of knowledge in this area with particular attention to how such findings relate to endogenous mechanisms of hyperalgesia and allodynia and potential applications for therapeutics based on modulation of intracellular Cl− gradients or pharmacological interventions targeting GABAA receptors PMID:19167425

  13. Chloride, bromide and iodide scintillators with europium

    DOEpatents

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  14. Processing of mercurous chloride in reduced gravity

    SciTech Connect

    Watson, C.; Thomas, A.

    1996-12-31

    In a joint experiment between the Northrop-Grumman Science and Technology Center and the University of Alabama in Huntsville, Consortium for Materials Development in Space (UAH/CMDS), single crystals of mercurous chloride (Hg{sub 2}Cl{sub 2}) were grown in the Space Experiment Facility (SEF) transparent furnace that was flown on Spacelab 4 (STS-77) in May 1996. Single crystals of this material can be readily grown in normal gravity by closed-tube physical vapor transport, but the crystals generally contain structural inhomogeneities which degrade the optical performance. The nature and cause of these defects are not completely understood, but their degree appears to correlate with the Rayleigh number that characterizes the convective transport during their growth; hence, it is suspected that uncontrolled convection may play a role in the defect structure. The objective of the flight experiment was to reduce the convective flows by several orders of magnitude to see if the structural inhomogeneities can be reduced or eliminated. This paper will describe the physical and thermal properties of the SEF furnace, the ampoule design and loading procedure, and the ground testing, and will also present the preliminary flight results.

  15. Kinetics of radiational hydrosilylation of vinyl chloride by methyldichlorosilane

    SciTech Connect

    Bryantseva, N.V.; Lugovoi, Yu.M.; Garsiya, I.K.; Shostenko, A.G.

    1988-03-01

    The main product of the radiational interaction of methyldichlorosilane with vinyl chloride is 2-chloroethylmethyldichlorosilane, formed according to a radical-chain addition scheme. The energy of activation of the addition reaction of the methyldichlorosilyl radical to vinyl chloride is 14 +/- 4 kJ/mole. Its low value is explained by the p..pi..-d..pi.. interaction in the transition state of the reaction. This interaction also explains the similar values of the energies of activation of the radical addition reactions of methyldichlorosilane to 1-hexene and vinyl chloride.

  16. Acid copper sulfate plating bath: Control of chloride and copper

    SciTech Connect

    Borhani, K.J.

    1992-08-01

    Plated-through holes in high-reliability printed wiring boards require a ductile copper plate of uniform consistency. The level of control of the chemical constituents in the electroplating solutions dictates the physical properties of the copper plate. To improve the control of the chemical bath constituents, in-situ methods for electrochemically determining copper and chloride in acid copper sulfate baths were developed. A solid-state ion-selective electrode was used for the chloride ion and proved to be more reproducible than conventional silver chloride turbidimetric methods. The use of a copper solid-state ion-selective electrode in-situ was also successful in this application.

  17. Aggregate influence on chloride ion diffusion into concrete

    SciTech Connect

    Hobbs, D.W.

    1999-12-01

    An attempt is made to predict the probable effect of the aggregate on chloride ion diffusion into saturated concrete. It is shown that if the chloride ion diffusion coefficient of an aggregate ranges from 0.2 to 10 times that of the cement past matrix, then this could result in variations in the concrete chloride ion diffusion coefficient of up to 10:1. Such a variation is equivalent to a change in free water-cement ration from 0.77 to 0.45.

  18. Copper Chloride Cathode For Liquid-Sodium Cell

    NASA Technical Reports Server (NTRS)

    Bugga, Ratnakumar V.; Distefano, Salvador; Nagasubramanian, Ganesan; Bankston, Clyde P.

    1990-01-01

    Rechargeable liquid-sodium cell with copper chloride cathode offers substantial increase in energy density over cells made with other cathode materials. Unit has theoretical maximum energy density of 1135 W.h/kg. Generates electricity by electrochemical reaction of molten sodium and solid copper chloride immersed in molten electrolyte, sodium tetrachloroaluminate at temperature of equal to or greater than 200 degrees C. Wall of alumina tube separates molten electrolyte from molten sodium anode. Copper chloride cathode embedded in pores of sintered nickel cylinder or directly sintered.

  19. Method for the production of uranium chloride salt

    DOEpatents

    Westphal, Brian R.; Mariani, Robert D.

    2013-07-02

    A method for the production of UCl.sub.3 salt without the use of hazardous chemicals or multiple apparatuses for synthesis and purification is provided. Uranium metal is combined in a reaction vessel with a metal chloride and a eutectic salt- and heated to a first temperature under vacuum conditions to promote reaction of the uranium metal with the metal chloride for the production of a UCl.sub.3 salt. After the reaction has run substantially to completion, the furnace is heated to a second temperature under vacuum conditions. The second temperature is sufficiently high to selectively vaporize the chloride salts and distill them into a condenser region.

  20. The ionic product of water in concentrated tetramethylammonium chloride solutions.

    PubMed

    Sipos, P; Bódi, I; May, P M; Hefter, G T

    1997-04-01

    The ionic product of water, pK(w) = - log[H(+)][OH(-)] has been determined in aqueous solutions of tetramethylammonium chloride over the concentration range of 0.1-5.5 M at 25 degrees C using high-precision glass electrode potentiometric titrations. pK(w) data relating to aqueous potassium and sodium chlorides at ionic strengths up to 5 M are markedly lower than the tetramethylammonium chloride results. These differences are almost certainly due to weak associations between potassium and (especially) sodium and hydroxide ions.

  1. Urinary thiodiglycolic acid levels for vinyl chloride monomer-exposed polyvinyl chloride workers.

    PubMed

    Cheng, T J; Huang, Y F; Ma, Y C

    2001-11-01

    Thiodiglycolic acid (TdGA) is the major metabolite of vinyl chloride monomer (VCM) detected in human urine. Although urinary TdGA has been reported to be associated with ambient VCM exposure, the relationship between urinary TdGA and a low level of air VCM is not clear. Questionnaires were administered to 16 polyvinyl chloride manufacturing workers to obtain a detailed history of occupation and lifestyle. For each worker, personal air monitoring for VCM was performed and a time-weighted average for VCM exposure was calculated. The urinary TdGA levels at the end of a work shift, and at the commencement of the next shift, were also assessed for each worker. Urine analysis revealed that TdGA levels at the beginning of the next shift were higher than those at the end of that shift. Workers experiencing a VCM exposure greater than 5 ppm in air revealed a urinary TdGA level significantly greater than those experiencing a VCM exposure of less than 5 ppm (P < 0.05). The best fit of regression for urinary TdGA on air VCM was Y = 1.06 + 0.57X for urine collected at the commencement of the following work shift, where X is the air VCM concentration and Y is the urinary TdGA concentration (r2 = 0.65, P < 0.01). We conclude that the urinary TdGA level is best detected at the commencement of the next shift and that it can be used as an exposure marker for polyvinyl chloride workers when the air VCM level to which they are exposed is greater than 5 ppm.

  2. Molecular dynamics simulations of threadlike cetyltrimethylammonium chloride micelles: effects of sodium chloride and sodium salicylate salts.

    PubMed

    Wang, Zuowei; Larson, Ronald G

    2009-10-22

    We use atomistic molecular dynamics simulations to probe the effects of added sodium chloride (NaCl) and sodium salicylate (NaSal) salts on the spherical-to-threadlike micelle shape transition in aqueous solutions of cetyltrimethylammonium chloride (CTAC) surfactants. Long threadlike micelles are found to be unstable and break into spherical micelles at low concentrations of NaCl, but remain stable for 20 ns above a threshold value of [NaCl] approximately 3.0 M, which is about 2.5 times larger than the experimental salt concentration at which the transition between spherical and rodlike micelles occurs. The chloride counterions associate weakly on the surface of the CTAC micelles with the degree of counterion dissociation decreasing slightly with increasing [NaCl] on spherical micelles, but dropping significantly on the threadlike micelles at high [NaCl]. This effect indicates that the electrolyte ions drive the micellar shape transition by screening the electrostatic repulsions between the micellar headgroups. The aromatic salicylate counterions, on the other hand, penetrate inside the micelle with their hydrophilic groups staying in the surfactant headgroup region and the hydrophobic groups partially embedded into the hydrophobic core of the micelle. The strong association of the salicylate ions with the surfactant headgroups leads to dense packing of the surfactant molecules, which effectively reduces the surface area per surfactant, and increases intramicellar ordering of the surfactant headgroups, favoring the formation of long threadlike micelles. Simulation predictions of the geometric and electrostatic properties of the spherical and threadlike micelles are in good agreement with experiments.

  3. A Synthetic Chloride Channel Restores Chloride Conductance in Human Cystic Fibrosis Epithelial Cells

    PubMed Central

    Wang, Fei; Yao, Xiaoqiang; Yang, Dan

    2012-01-01

    Mutations in the gene-encoding cystic fibrosis transmembrane conductance regulator (CFTR) cause defective transepithelial transport of chloride (Cl−) ions and fluid, thereby becoming responsible for the onset of cystic fibrosis (CF). One strategy to reduce the pathophysiology associated with CF is to increase Cl− transport through alternative pathways. In this paper, we demonstrate that a small synthetic molecule which forms Cl− channels to mediate Cl− transport across lipid bilayer membranes is capable of restoring Cl− permeability in human CF epithelial cells; as a result, it has the potential to become a lead compound for the treatment of human diseases associated with Cl− channel dysfunction. PMID:22514656

  4. The management of Frey's syndrome with aluminium chloride hexahydrate antiperspirant.

    PubMed Central

    Black, M. J.; Gunn, A.

    1990-01-01

    Nine patients suffering from gustatory sweating (Frey's syndrome) following parotidectomy have been treated by topical applications of aluminium chloride hexahydrate. Treatment has successfully controlled gustatory sweating using application intervals varying from 1 to 50 days. Images Figure 1 PMID:2301903

  5. [Biochemical changes in rats under the influence of cesium chloride].

    PubMed

    Mel'nykova, N M; Iermishev, O V

    2013-01-01

    Cesium is lately accumulated actively in the environment, but its influence on human and animal organism is the least studied among heavy metals. It is shown that the action of cesium chloride in rats caused significant changes in blood chemistry, which are characterized by a decrease of total protein content, pH, an increase in the level of urea, creatinine, glucose and total hemoglobin. The results showed that potassium content in all the studied organs and tissues of poisoned rats decreases under the action of cesium chloride. Histological examination of the heart tissue in rats poisoned with cesium chloride indicates the onset of pathology of cardiovascular system. It was found out that use of the drug "Asparkam" reduces the negative effect of cesium chloride on the body of rats.

  6. Vinyl chloride removal from an air stream by biotrickling filter.

    PubMed

    Faraj, S H Esmaeili; Esfahany, M Nasr; Kadivar, M; Zilouei, H

    2012-01-01

    A biofiltration process was used for degradation of vinyl chloride as a hazardous material in the air stream. Three biotrickling filters in series-parallel allowing uniform feed and moisture distribution all over the bed were used. Granular activated carbon mixed with compost was employed as carrier bed. The biological culture consisted of mixture of activated sludge from PVC wastewater treatment plant. Concurrent flow of gas and liquid was used in the bed. Results indicated that during the operation period of 110 days, the biotrickling bed was able to remove over 35% of inlet vinyl chloride. Maximum elimination capacity was calculated to be 0.56 g.m(-3).hr(-1). The amount of chlorine accumulated in the circulating liquid due to the degradation of vinyl chloride was measured to be equal to the vinyl chloride removed from the air stream.

  7. Electrical, thermal and abusive tests on lithium thionyl chloride cells

    NASA Technical Reports Server (NTRS)

    Frank, H. A.

    1980-01-01

    Electrical characterizations, thermal characterizations, and outer limits tests of lithium thionyl chloride cells are discussed. Graphs of energy density vs power density and heat rate vs time are presented along with results of forced reversal and high rate discharge tests.

  8. Lithium orotate, carbonate and chloride: pharmacokinetics, polyuria in rats.

    PubMed Central

    Smith, D F

    1976-01-01

    1 The pharmacokinetics of the lithium ion administered as lithium orotate were studied in rats. Parallel studies were carried out with lithium carbonate and lithium chloride. 2 No differences in the uptake, distribution and excretion of the lithium ion were observed between lithium orotate, lithium carbonate and lithium chloride after single intraperitoneal, subcutaneous or intragastric injections (0.5-1.0 mEq lithium/kg) or after administration of the lithium salts for 20 days in the food. 3 The findings oppose the notion that the pharmacokinetics of the lithium ion given as lithium orotate differ from lithium chloride or lithium carbonate. 4 Polyuria and polydipsia developed more slowly in rats given lithium orotate than in those given lithium carbonate or lithium chloride, perhaps due to an effect of the orotate anion. PMID:1260219

  9. Electrolysis of dilute sodium chloride solution in a diaphragm cell

    SciTech Connect

    Kubasov, V.L.; Ivanter, I.A.; Druzhinin, E.A.; Vorob'eva, V.B.

    1986-02-10

    In some cases, as in the production of iodine and bromine, dilute solutions of sodium chloride remain unutilized. In view of the existence of large amounts of unutilized spent sodium chloride solutions and their harmful effect when discharged into the environment, it is desirable to develop a process for production of chlorine and alkali with high current efficiencies, satisfying industrial requirements, from dilute sodium chloride solutions. The authors have therefore studied electrolysis of solutions containing 160 and 180 kg/m/sup 3/ of sodium chloride, having pH of 11.0-11.5, close in composition to solutions from the Cheleken chemical factory. The chlorine and alkali current efficiencies and the compositions of the anolyte, catholyte, and anode gas were determined.

  10. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    PubMed

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications. PMID:21922094

  11. Tested Demonstrations. A Chemiluminescence Demonstration - Oxalyl Chloride Oxidation.

    ERIC Educational Resources Information Center

    Gilber, George L., Ed.

    1979-01-01

    This inexpensive, effective chemiluminescence demonstration requires minimal preparation. It is based on the oxidation of oxalyl chloride by hydrogen peroxide in the presence of an appropriate fluorescent sensitizer. The reaction mechanism is not completely understood. (BB)

  12. Automatic electrochemical ambient air monitor for chloride and chlorine

    DOEpatents

    Mueller, Theodore R.

    1976-07-13

    An electrochemical monitoring system has been provided for determining chloride and chlorine in air at levels of from about 10-1000 parts per billion. The chloride is determined by oxidation to chlorine followed by reduction to chloride in a closed system. Chlorine is determined by direct reduction at a platinum electrode in 6 M H.sub.2 SO.sub.4 electrolyte. A fully automated system is utilized to (1) acquire and store a value corresponding to electrolyte-containing impurities, (2) subtract this value from that obtained in the presence of air, (3) generate coulometrically a standard sample of chlorine mixed with air sample, and determine it as chlorine and/or chloride, and (4) calculate, display, and store for permanent record the ratio of the signal obtained from the air sample and that obtained with the standard.

  13. Thermodynamic calculation of self-diffusion in sodium chloride

    NASA Astrophysics Data System (ADS)

    Zhang, Baohua; Li, Chengbo; Shan, Shuangming

    2016-05-01

    Using the available pressure-volume-temperature equation of state of sodium chloride, we show that the self-diffusion coefficients of sodium and chloride in sodium chloride as a function of temperature and pressure can be successfully reproduced in terms of bulk elastic and expansivity data. We use a thermodynamic model that interconnects point-defect parameters with bulk properties. Our calculated diffusion coefficients and point-defect parameters, including activation enthalpy, activation entropy, and activation volume, well agree with reported experimental results when uncertainties are considered. Furthermore, the ionic conductivity of sodium chloride inferred from our predicted diffusivities of sodium through the Nernst-Einstein equation is compared with previous experimental data.

  14. Lithium orotate, carbonate and chloride: pharmacokinetics, polyuria in rats.

    PubMed

    Smith, D F

    1976-04-01

    1 The pharmacokinetics of the lithium ion administered as lithium orotate were studied in rats. Parallel studies were carried out with lithium carbonate and lithium chloride. 2 No differences in the uptake, distribution and excretion of the lithium ion were observed between lithium orotate, lithium carbonate and lithium chloride after single intraperitoneal, subcutaneous or intragastric injections (0.5-1.0 mEq lithium/kg) or after administration of the lithium salts for 20 days in the food. 3 The findings oppose the notion that the pharmacokinetics of the lithium ion given as lithium orotate differ from lithium chloride or lithium carbonate. 4 Polyuria and polydipsia developed more slowly in rats given lithium orotate than in those given lithium carbonate or lithium chloride, perhaps due to an effect of the orotate anion. PMID:1260219

  15. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    PubMed

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications.

  16. SUBSTITUTION OF CADMIUM CYANIDE ELECTROPLATING WITH ZINC CHLORIDE ELECTROPLATING

    EPA Science Inventory

    The study evaluated the zinc chloride electroplating process as a substitute for cadmium cyanide electroplating in the manufacture of industrial connectors and fittings at Aeroquip Corporation. The process substitution eliminates certain wastes, specifically cadmium and cyanide, ...

  17. Heterogeneous Reaction gaseous chlorine nitrate and solid sodium chloride

    NASA Technical Reports Server (NTRS)

    Timonen, Raimo S.; Chu, Liang T.; Leu, Ming-Taun

    1994-01-01

    The heterogeneous reaction of gaseous chlorine nitrate and solid sodium chloride was investigated over a temperature range of 220 - 300 K in a flow-tube reactor interfaced with a differentially pumped quadrupole mass spectrometer.

  18. Vinyl chloride: still a cause for concern.

    PubMed Central

    Kielhorn, J; Melber, C; Wahnschaffe, U; Aitio, A; Mangelsdorf, I

    2000-01-01

    Vinyl chloride (VC) is both a known carcinogen and a regulated chemical, and its production capacity has almost doubled over the last 20 years, currently 27 million tons/year worldwide. According to recent reports it is still a cause for concern. VC has been found as a degradation product of chloroethylene solvents (perchloroethylene and trichloroethylene) and in landfill gas and groundwater at concentrations up to 200 mg/m(3) and 10 mg/L, respectively. Worldwide occupational exposure to VC still seems to be high in some countries (e.g., averages of approximately 1,300 mg/m(3) until 1987 in one factory), and exposure may also be high in others where VC is not regulated. By combining the most relevant epidemiologic studies from several countries, we observed a 5-fold excess of liver cancer, primarily because of a 45-fold excess risk from angiosarcoma of the liver (ASL). The number of ASL cases reported up to the end of 1998 was 197 worldwide. The average latency for ASL is 22 years. Some studies show a small excess risk for hepatocellular carcinoma, and others suggest a possible risk of brain tumors among highly exposed workers. Lung cancer, lymphomas, or leukemia do not seem to be related to VC exposure according to recent results. The mutation spectra observed in rat and human liver tumors (ASL and/or hepatocellular carcinoma) that are associated with exposure to VC are clearly distinct from those observed in sporadic liver tumors or hepatic tumors that are associated with other exposures. In rats, the substitution mutations found at A:T base pairs in the ras and p53 genes are consistent with the promutagenic properties of the DNA adduct 1,N(6)-ethenoadenine formed from VC metabolites. Risk assessments derived from animal studies seem to overestimate the actual risk of cancer when comparing estimated and reported cases of ASL. Images Figure 1 Figure 2 PMID:10905993

  19. Corneal Neurotoxicity Due to Topical Benzalkonium Chloride

    PubMed Central

    Sarkar, Joy; Chaudhary, Shweta; Namavari, Abed; Ozturk, Okan; Chang, Jin-Hong; Yco, Lisette; Sonawane, Snehal; Khanolkar, Vishakha; Hallak, Joelle; Jain, Sandeep

    2012-01-01

    Purpose. The aim of this study was to determine and characterize the effect of topical application of benzalkonium chloride (BAK) on corneal nerves in vivo and in vitro. Methods. Thy1-YFP+ neurofluorescent mouse eyes were treated topically with vehicle or BAK (0.01% or 0.1%). Wide-field stereofluorescence microscopy was performed to sequentially image the treated corneas in vivo every week for 4 weeks, and changes in stromal nerve fiber density (NFD) and aqueous tear production were determined. Whole-mount immunofluorescence staining of corneas was performed with antibodies to axonopathy marker SMI-32. Western immunoblot analyses were performed on trigeminal ganglion and corneal lysates to determine abundance of proteins associated with neurotoxicity and regeneration. Compartmental culture of trigeminal ganglion neurons was performed in Campenot devices to determine whether BAK affects neurite outgrowth. Results. BAK-treated corneas exhibited significantly reduced NFD and aqueous tear production, and increased inflammatory cell infiltration and fluorescein staining at 1 week (P < 0.05). These changes were most significant after 0.1% BAK treatment. The extent of inflammatory cell infiltration in the cornea showed a significant negative correlation with NFD. Sequential in vivo imaging of corneas showed two forms of BAK-induced neurotoxicity: reversible neurotoxicity characterized by axonopathy and recovery, and irreversible neurotoxicity characterized by nerve degeneration and regeneration. Increased abundance of beta III tubulin in corneal lysates confirmed regeneration. A dose-related significant reduction in neurites occurred after BAK addition to compartmental cultures of dissociated trigeminal ganglion cells. Although both BAK doses (0.0001% and 0.001%) reduced nerve fiber length, the reduction was significantly more with the higher dose (P < 0.001). Conclusion. Topical application of BAK to the eye causes corneal neurotoxicity, inflammation, and reduced aqueous

  20. Output of histamine chloride from 7 nebulizers.

    PubMed

    Nortoft, E; Bundgaard, A

    1986-01-01

    The aim of the study was to assess the amount of aerosol delivered by seven different nebulizers. Six of the nebulizers were supplied by an airstream of 7.5 l/min and the seventh (Pari Inhalierboy) connected to a compressor supplying an airstream of 15 l/min. The nebulizer plus solution was weighed before and after one min of nebulization. In this way the amount of aerosol delivered was measured ten times for each nebulizer. Results are given as mean values +/- SD (gram/min): Hudson nebulizer model no. 2720: 0.2950 +/- 0.0154, Mefar Respi-Neb: 0.3574 +/- 0.0100, Sandoz: 0.4399 +/- 0.0201, VIx: 0.2824 +/- 0.0121, Acorn: 0.3619 +/- 0.0088, Pari Inhalierboy: 0.4865 +/- 0.0105, Raindrop: 0.2668 +/- 0.0082. Standard deviation calculated as per cent of the average were: Hudson nebulizer model no. 1720: 5.22%, Mefar Respi-Neb: 2.80%, Sandoz: 4.57% Vix: 4.28%, Acorn 2.43%, Pari Inhalierboy: 2.16%, Raindrop: 3.00%. Per cent variation between the products giving Hudson 100%: Mefar Respi-Neb: +18.77, Sandoz +46.19, Vix: -6.14, Acorn: +20.27, Pari Inhalierboy: +61.68, Raindrop: -9.56. The Hudson nebulizer was also tested with three different volumes of histamine chloride: 2 ml, 3 ml, and 4 ml. The mean values +/- SD (gram/min) for the aerosols were: 2 ml: 0.2986 +/- 0.0071, 3 ml: 0.2981 +/- 0.0080 and 4 ml: 0.2976 +/- 0.0056. The mean value of output from ten different Hudson nebulizers +/- SD was: 0.2767 +/- 0.0105 gram/min.

  1. Regulation of neuronal chloride homeostasis by neuromodulators

    PubMed Central

    Mahadevan, Vivek; Woodin, Melanie A.

    2016-01-01

    Abstract KCC2 is the central regulator of neuronal Cl− homeostasis, and is critical for enabling strong hyperpolarizing synaptic inhibition in the mature brain. KCC2 hypofunction results in decreased inhibition and increased network hyperexcitability that underlies numerous disease states including epilepsy, neuropathic pain and neuropsychiatric disorders. The current holy grail of KCC2 biology is to identify how we can rescue KCC2 hypofunction in order to restore physiological levels of synaptic inhibition and neuronal network activity. It is becoming increasingly clear that diverse cellular signals regulate KCC2 surface expression and function including neurotransmitters and neuromodulators. In the present review we explore the existing evidence that G‐protein‐coupled receptor (GPCR) signalling can regulate KCC2 activity in numerous regions of the nervous system including the hypothalamus, hippocampus and spinal cord. We present key evidence from the literature suggesting that GPCR signalling is a conserved mechanism for regulating chloride homeostasis. This evidence includes: (1) the activation of group 1 metabotropic glutamate receptors and metabotropic Zn2+ receptors strengthens GABAergic inhibition in CA3 pyramidal neurons through a regulation of KCC2; (2) activation of the 5‐hydroxytryptamine type 2A serotonin receptors upregulates KCC2 cell surface expression and function, restores endogenous inhibition in motoneurons, and reduces spasticity in rats; and (3) activation of A3A‐type adenosine receptors rescues KCC2 dysfunction and reverses allodynia in a model of neuropathic pain. We propose that GPCR‐signals are novel endogenous Cl− extrusion enhancers that may regulate KCC2 function. PMID:26876607

  2. Micellar solubilization in strongly interacting binary surfactant systems. [Binary surfactant systems of: dodecyltrimethylammonium chloride + sodium dodecyl sulfate; benzyldimethyltetradecylammonium chloride + tetradecyltrimethylammonium chloride

    SciTech Connect

    Treiner, C. ); Nortz, M.; Vaution, C. )

    1990-07-01

    The apparent partition coefficient P of barbituric acids between micelles and water has been determined in mixed binary surfactant solutions from solubility measurements in the whole micellar composition range. The binary systems chosen ranged from the strongly interacting system dodecyltrimethylammonium chloride + sodium dodecyl sulfate to weakly interacting systems such as benzyldimethyltetradecylammonium chloride + tetradecyltrimethyammonium chloride. In all cases studied, mixed micelle formation is unfavorable to micellar solubilization. A correlation is found between the unlike surfactants interaction energy, as measured by the regular solution parameter {beta} and the solute partition coefficient change upon surfactant mixing. By use of literature data on micellar solubilization in binary surfactant solutions, it is shown that the change of P for solutes which are solubilized by surface adsorption is generally governed by the sign and amplitude of the interaction parameter {beta}.

  3. Electromagnetic-induction logging to monitor changing chloride concentrations.

    PubMed

    Metzger, Loren F; Izbicki, John A

    2013-01-01

    Water from the San Joaquin Delta, having chloride concentrations up to 3590 mg/L, has intruded fresh water aquifers underlying Stockton, California. Changes in chloride concentrations at depth within these aquifers were evaluated using sequential electromagnetic (EM) induction logs collected during 2004 through 2007 at seven multiple-well sites as deep as 268 m. Sequential EM logging is useful for identifying changes in groundwater quality through polyvinyl chloride-cased wells in intervals not screened by wells. These unscreened intervals represent more than 90% of the aquifer at the sites studied. Sequential EM logging suggested degrading groundwater quality in numerous thin intervals, typically between 1 and 7 m in thickness, especially in the northern part of the study area. Some of these intervals were unscreened by wells, and would not have been identified by traditional groundwater sample collection. Sequential logging also identified intervals with improving water quality-possibly due to groundwater management practices that have limited pumping and promoted artificial recharge. EM resistivity was correlated with chloride concentrations in sampled wells and in water from core material. Natural gamma log data were used to account for the effect of aquifer lithology on EM resistivity. Results of this study show that a sequential EM logging is useful for identifying and monitoring the movement of high-chloride water, having lower salinities and chloride concentrations than sea water, in aquifer intervals not screened by wells, and that increases in chloride in water from wells in the area are consistent with high-chloride water originating from the San Joaquin Delta rather than from the underlying saline aquifer.

  4. Electromagnetic-induction logging to monitor changing chloride concentrations

    USGS Publications Warehouse

    Metzger, Loren F.; Izbicki, John A.

    2013-01-01

    Water from the San Joaquin Delta, having chloride concentrations up to 3590 mg/L, has intruded fresh water aquifers underlying Stockton, California. Changes in chloride concentrations at depth within these aquifers were evaluated using sequential electromagnetic (EM) induction logs collected during 2004 through 2007 at seven multiple-well sites as deep as 268 m. Sequential EM logging is useful for identifying changes in groundwater quality through polyvinyl chloride-cased wells in intervals not screened by wells. These unscreened intervals represent more than 90% of the aquifer at the sites studied. Sequential EM logging suggested degrading groundwater quality in numerous thin intervals, typically between 1 and 7 m in thickness, especially in the northern part of the study area. Some of these intervals were unscreened by wells, and would not have been identified by traditional groundwater sample collection. Sequential logging also identified intervals with improving water quality—possibly due to groundwater management practices that have limited pumping and promoted artificial recharge. EM resistivity was correlated with chloride concentrations in sampled wells and in water from core material. Natural gamma log data were used to account for the effect of aquifer lithology on EM resistivity. Results of this study show that a sequential EM logging is useful for identifying and monitoring the movement of high-chloride water, having lower salinities and chloride concentrations than sea water, in aquifer intervals not screened by wells, and that increases in chloride in water from wells in the area are consistent with high-chloride water originating from the San Joaquin Delta rather than from the underlying saline aquifer.

  5. Determination of chloride in geological samples by ion chromatography

    USGS Publications Warehouse

    Wilson, S.A.; Gent, C.A.

    1983-01-01

    Samples of silicate rocks are prepared by sodium carbonate fusion and then treated by ion chromatography. The method was tested for geological standards with chloride concentration between 0.003 and 3%. Observed chloride concentrations comparedd favorably with literature values. The relative standard deviation and detection limit for the method were 8% and 7 ppm, respectively. Up to 30 determination per 24-hour period were possible. ?? 1983.

  6. Macrocycle Synthesis by Chloride-Templated Amide Bond Formation.

    PubMed

    Martí-Centelles, Vicente; Burguete, M Isabel; Luis, Santiago V

    2016-03-01

    A new family of pseudopeptidic macrocyclic compounds has been prepared involving an anion-templated amide bond formation reaction at the macrocyclization step. Chloride anion was found to be the most efficient template in the macrocyclization process, producing improved macrocyclization yields with regard to the nontemplated reaction. The data suggest a kinetic effect of the chloride template, providing an appropriate folded conformation of the open-chain precursor and reducing the energy barrier for the formation of the macrocyclic product. PMID:26820908

  7. [Determination of Chloride Salt Solution by NIR Spectroscopy].

    PubMed

    Zhang, Bin; Chen, Jian-hong; Jiao, Ming-xing

    2015-07-01

    Determination of chloride salt solution by near infrared spectrum plays a very important role in Biomedicine. The near infrared spectrum analysis of Sodium chloride, potassium chloride, calcium chloride aqueous solution shows that the concentration change of chloride salt can affect hydrogen bond, resulting in the variation of near infrared spectrum of water. The temperature influence on NIR spectrum has been decreased by choosing reasonable wavelength range and the wavelength where the temperature effects are zero (isosbestic point). Chlorine salt prediction model was established based on partial least squares method and used for predicting the concentration of the chlorine ion. The impact on near infrared spectrum of the cation ionic radius, the number of ionic charge, the complex effect of ionic in water has also discussed in this article and the reason of every factor are analysed. Experimental results show that the temperature and concentration will affect the near-infrared spectrum of the solution, It is found that the effect of temperature plays the dominant role at low concentrations of chlorine salt; rather, the ionic dominates at high concentration. Chloride complexes are formed in aqueous solution, It has an effect on hydrogen bond of water combining with the cations in chlorine salt solution, Comparing different chloride solutions at the same concentration, the destruction effects of chloride complexes and catnions on the hydrogen bond of water increases in the sequences: CaCl2 >NaCl>KC. The modeling result shows that the determination coefficients (R2) = 99.97%, the root mean square error of cross validation (RM- SECV) = 4.51, and the residual prediction deviation (RPD) = 62.7, it meets the daily requirements of biochemical detection accuracy.

  8. Simultaneous chloride removal and realkalinization of old concrete structures

    SciTech Connect

    Chatterji, S. )

    1994-01-01

    Many of the old concrete structures in Denmark and many other countries, especially those exposed to marine conditions, contain chloride. Many of these structures show extensive reinforcement corrosion. In this note an improved electrolytic technique has been suggested for simultaneous removal of chloride and realkalinization of old concrete structures. In the suggested technique auxiliary electrodes, Ca(OH)[sub 2] and Ca(NO[sub 3])[sub 2] solutions are used to avoid some of the risks associated with direct electrolysis.

  9. A new system for early chloride detection in concrete

    NASA Astrophysics Data System (ADS)

    Laferrière, Francine; Inaudi, Daniele; Kronenberg, Pascal; Smith, Ian F. C.

    2008-08-01

    In a national and worldwide context, countless reinforced concrete structures are in an advanced state of deterioration. A principal cause of such degradation is chloride induced corrosion of reinforcement bars. This phenomenon is accentuated in countries where de-icing salts are used for road safety, as well as in maritime zones. To date, no non-destructive method quantifying chloride content during the corrosion initiation phase has been established. Measurement of such a parameter is important for the development of a better understanding of the complexity of corrosion phenomena and, more practically, for better management of existing structures. This paper proposes a new method for non-destructive measurement, for monitoring continuously and in real time free chloride content in concrete pores. In this context, a chemical sensor that employs optical fibers was developed and tested. The sensor functions using the fluorescence of an indicator dye that is sensitive to chlorides. Through fluorescence spectroscopy, variations in the concentration of free chlorides are related to intensity fluctuations of fluorescence. The use of optical fibers also provides an advantage compared with existing electric non-destructive detection systems due to superior electromagnetic stability. Theoretical and experimental studies calibrated and validated the sensor for implementation within mortar samples. Free chloride concentrations between 30 and 350 mM can be detected. Two experiments reproduced climatic variations in a controlled environment. The first test simulated a hot maritime climate and the second test simulated a cold continental climate. These tests confirmed that it is possible to determine with precision the free chloride content. Also, fluorescence spectroscopy with optical fibers offers an innovative means for early and non-destructive detection of free chloride content in concrete. As a result, this new method has potential for improving the science of corrosion

  10. SOLVENT EXTRACTION PROCESS FOR URANIUM FROM CHLORIDE SOLUTIONS

    DOEpatents

    Blake, C.A. Jr.; Brown, K.B.; Horner, D.E.

    1960-05-24

    An improvement was made in a uranium extraction process wherein the organic extractant is a phosphine oxide. An aqueous solution containing phosphate ions or sulfate ions together with uranium is provided with a source of chloride ions during the extraction step. The presence of the chloride ions enables a phosphine oxide to extract uranium in the presence of strong uranium- complexing ions such as phosphate or sulfate ions.

  11. Synthesis and structural characterization of polyaniline/cobalt chloride composites

    NASA Astrophysics Data System (ADS)

    Asha, Goyal, Sneh Lata; Kishore, Nawal

    2016-05-01

    Polyaniline (PANI) and PANI /cobalt chloride composites were synthesized by in situ chemical oxidative polymerization of aniline with CoCl2.6H2O using ammonium peroxidisulphate as an oxidant. These composites were characterized by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). The XRD study reveals that both PANI and composites are amorphous. The XRD and SEM results confirm the presence of cobalt chloride in the composites.

  12. Fractal Dimensionality of Vinyl Chloride Monomer Adsorption on Polyvinyl Chloride Particles

    PubMed

    Demertzis; Pomonis

    1997-02-15

    The extent of adsorption of vinyl chloride monomer (VCM) on polyvinyl chloride (PVC) beads of various size was examined using the inverse gas chromatography technique at 288, 295, 303, and 313 K. The sizes of the PVC beads were 60-80, 100-120, and 150-200 mesh. On them the specific retention volume Vg (ml/g) of the injected gaseous monomer was determined. Vg depends on the mean particle size &dmacr; of PVC beads according to the relationship log Vg = (D - 3)log &dmacr;, from which the mass fractal D values were determined between 2.95 and 2.63 depending on the temperature and the dilution of monomer. Higher temperatures (313 K) are associated with lower D values (2.63-2.67), whereas lower temperatures (288 K) are associated with higher D values (2.87-2.95). These results suggest that the PVC behaves more as a two-dimensional material in relation to VCM adsorption at higher temperatures, whereas at lower temperatures it looks more like a three-dimensional Euclidean solid.

  13. Aluminum Chloride Hexahydrate in a Salicylic Acid Gel

    PubMed Central

    Valins, Whitney

    2009-01-01

    Hyperhidrosis is a common dermatological condition that has a tremendous impact on the quality of life of affected patients. Aluminum chloride hexahydrate is considered first-line therapy for patients with mild-to-moderate hyperhidrosis. This treatment has been proven to be effective in the treatment of hyperhidrosis; however, its use has been limited by significant irritation. In many patients, the irritant dermatitis is so severe that, despite clinical efficacy, this therapy must be discontinued. There are many topical aluminum chloride therapies available. Observations from a busy hyperhidrosis practice revealed decreased irritation and increased efficacy with a novel therapy that combines 15% aluminum chloride hexahydrate with 2% salicylic acid in a gel base. This combination of 15% aluminum chloride hexahydrate with 2% salicylic acid offers patients who have failed aluminum chloride hexahydrate in the past excellent efficacy with minimal irritation. We report seven cases of patients with a history of severe irritation from aluminum chloride who maintained excellent results with this new topical without any significant irritation. PMID:20729946

  14. Microwave nondestructive detection of chloride in cement based materials

    SciTech Connect

    Benally, Aaron D.; Bois, Karl J.; Zoughi, Reza; Nowak, Paul S.

    1999-12-02

    Preliminary results pertaining to the near-field microwave nondestructive detection and evaluation of chloride in cement paste and mortar specimens are presented. The technique used for this purpose utilizes an open-ended rectangular waveguide at the aperture of which the reflection properties of the specimens are measured. It is shown that the magnitude of reflection coefficient is a useful parameter for detecting chloride in these specimens. Furthermore, the difference in the amount of chloride present in these various specimens, at the time of mixing, can also be determined. Reflection property measurements were conducted in S-band (2.6 GHz-3.95 GHz) and X-band (8.2-12.4 GHz) for two sets of four mortar specimens with 0.50 and 0.60 water-to-cement ratio and varying salt (NaCl) contents added to the mixing water used in producing these specimens. It is shown that the reflection properties of these materials vary considerably as a function of their chloride content. Also, by monitoring the daily variation in the reflection coefficient of each specimen during the curing period, the effect of chloride on curing can be nondestructively ascertained. Finally, it is shown that the detection and evaluation of chloride content in cement based materials can be performed using a simple comparative process with respect to a non-contaminated specimen.

  15. Removal of chloride from electric arc furnace dust.

    PubMed

    Chen, Wei-Sheng; Shen, Yun-Hwei; Tsai, Min-Shing; Chang, Fang-Chih

    2011-06-15

    Electric arc furnace (EAF) dust with high chloride content increases the threat of dioxin emissions and the high chloride content reduces the value of recycled zinc oxide produced by EAF dust recycling plants. This study conducts a number of laboratory experiments to determine the technical feasibility of a new dechlorination method. These methods consist of a series of roasting processes and water washing processes. In the roasting process, EAF dust was heated in a tube furnace to evaluate the parameters of atmospheric conditions, roasting temperature, and roasting time. Results indicate that sulfation roasting is more efficient in reducing chloride content than other roasting processes. The water washing process can totally remove water-soluble chloride at a solid to liquid ratio of 1:10. However, the remaining water-insoluble substance is difficult to dechlorinate. For example, lead chloride forms a hydroxyl-halide (PbOHCl) and lead chloride carbonate (Pb(2)CO(3)Cl(2)) agglutinative matrix that is hard to wash away.

  16. Chloride chemical form in various types of fly ash

    SciTech Connect

    Fenfen Zhu; Masaki Takaoka; Kenji Shiota; Kazuyuki Oshita; Yoshinori Kitajima

    2008-06-01

    Chloride content is a critical problem for the reuse of fly ash as a raw material in cement, and the method used by recyclers to reduce the fly ash chloride content depends on the chemical form of the chlorides. However, limited information is available on the quantitative distribution of chlorides and the identity of some chlorides such as Friedel's salt. We examined chloride forms and percentages using X-ray absorption near edge structure and X-ray diffraction analyses, as well as corresponding washing experiments. Approximately 15% of the chlorine in raw fly ash was estimated to be in the form of NaCl, 10% in KCl, 50% in CaCl{sub 2}, and the remainder in the form of Friedel's salt. Fly ash collected in a bag filter with the injection of calcium hydroxide for acid gas removal (CaFA) contained 35% chlorine as NaCl, 11% as KCl, 37% as CaCl{sub 2}, 13% as Friedel's salt, and the remaining 4% as CaClOH. In fly ash collected in a bag filter with the injection of sodium bicarbonate for acid gas removal (NaFA), approximately 79% of chlorine was in NaCl, 12% was in KCl, and 9% was in Friedel's salt. 25 refs., 4 figs., 4 tabs.

  17. Sodium-metal chloride battery research at JPL

    NASA Technical Reports Server (NTRS)

    Ratnakumar, B. V.; Attia, A. I.; Halpert, G.

    1991-01-01

    Sodium metal chloride batteries have certain distinct advantages over sodium sulfur batteries such as increased safety, inherent overcharge capability and lower operation temperatures. Two systems, i.e., Na/FeCl2 and Na/NiCl2 were developed extensively elsewhere and evaluated for various applications including electric vehicles and space. Their performance has been very encouraging and prompted a detailed fundamental study of these cathodes here at the Jet Propulsion Laboratory. A brief review of our studies on these new cathode materials is presented here. The initial efforts focussed on the methods of fabrication of the electrodes and their electrochemical characterization. Subsequent studies were aimed at establishing the reaction mechanism, determining the kinetics and identifying the rate limiting processes in the reduction of metal chloride cathodes. Nickel chloride emerged from these studies as the most promising candidate material and was taken up for further detailed study on its passivation - a rate limiting process - under different experimental conditions. Also, the feasibility of using copper chloride, which is expected to have higher energy density, has been assessed. Based on the criteria established from the voltammetric response of FeCl2, NiCl2, and CuCl2, several other transition metal chlorides were screened. Of these, molybdenum and cobalt chlorides appear promising.

  18. Effect of metal chlorides on thermal degradation of (waste) polycarbonate

    SciTech Connect

    Chiu, S.-J. . E-mail: sjchiu@ns1.mit.edu.tw; Chen, S.-H.; Tsai, C.-T.

    2006-07-01

    In this study, we investigated how to treat (waste) polycarbonate efficiently to reduce its degraded residue. The study was carried out in an isothermal reactor under continuous nitrogen flow at atmospheric pressure to pyrolyze polycarbonate (PC) alone and in the presence of metal chloride. Some metal chlorides were shown to be catalytic active for the degradation of PC at 400 deg. C, which increased degradation conversion from 8.5% to more than 58.3%. Among those active metal chlorides, ZnCl{sub 2} and SnCl{sub 2} can produce higher liquid product yields. Effects such as particle size of PC, temperature, the weight ratio of metal chloride/PC, and degradation time on the degradation conversion of PC without and with these two most active metal chlorides were studied. Results of the liquid product analysis by GC/MS demonstrated the product composition of PC degradation over the metal chlorides is much simpler than that of degradation alone. The main liquid product is phenol, p-isopropylphenol, diphenyl carbonate, and bisphenol A for all cases.

  19. DEVELOPMENTAL TOXICITY OF COPPER CHLORIDE, METHYLENE CHLORIDE,AND 6-AMINONICOTINAMIDE TO EMBRYOS OF THE GRASS SHRIMPPALAEMONETES PUGIO

    EPA Science Inventory

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, cop...

  20. A small synthetic molecule functions as a chloride-bicarbonate dual-transporter and induces chloride secretion in cells.

    PubMed

    Liu, Peng-Yun; Li, Shing-To; Shen, Fang-Fang; Ko, Wing-Hung; Yao, Xiao-Qiang; Yang, Dan

    2016-05-31

    A C2 symmetric small molecule composed of l-phenylalanine and isophthalamide was found to function as a Cl(-)/HCO3(-) dual transporter and self-assemble into chloride channels. In Ussing-chamber based short-circuit current measurements, this molecule elicited chloride-dependent short-circuit current (Isc) increase in both Calu-3 cell and CFBE41o-cell (with F508del mutant CFTR) monolayers. PMID:27188496

  1. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... chloride plants. 61.64 Section 61.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator of a polyvinyl chloride plant shall comply with the requirements of this section and § 61.65....

  2. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... chloride plants. 61.64 Section 61.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator of a polyvinyl chloride plant shall comply with the requirements of this section and § 61.65....

  3. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) before being opened. (d) Monomer recovery system. The concentration of vinyl chloride in each exhaust gas... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in...

  4. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) before being opened. (d) Monomer recovery system. The concentration of vinyl chloride in each exhaust gas... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in...

  5. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) before being opened. (d) Monomer recovery system. The concentration of vinyl chloride in each exhaust gas... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator...) Reactor. The following requirements apply to reactors: (1) The concentration of vinyl chloride in...

  6. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Calcium pantothenate, calcium chloride double salt..., calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may... information required by the Act, the following: (1) The name of the additive “calcium chloride double salt...

  7. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Calcium pantothenate, calcium chloride double salt..., calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may... information required by the Act, the following: (1) The name of the additive “calcium chloride double salt...

  8. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Calcium pantothenate, calcium chloride double salt..., calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may... information required by the Act, the following: (1) The name of the additive “calcium chloride double salt...

  9. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Calcium pantothenate, calcium chloride double salt..., calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may... information required by the Act, the following: (1) The name of the additive “calcium chloride double salt...

  10. [Pulmonary manifestations of polyvinyl chloride exposure].

    PubMed

    Süyür, Hüseyin; Bayram, Nazan; Aydın, Neriman; Uyar, Meral; Gündoğdu, Nevhiz; Elbek, Osman

    2011-01-01

    There is currently no national data on the effects of polyvinyl chloride (PVC) exposure on pulmonary function. In this study we recruited workers and administrative staff from two PVC plants between July 2008 and July 2009. A questionnaire, pulmonary function tests, carbon monoxide diffusion capacity, and peak flows were recorded. Particulate matter analyses were performed by the Adana Central Laboratory of the Directorate of Occupational Health and Safety. Data were analyzed with SPSS 13.0 software. Nine of the 147 subjects were female. The incidence of a cough was more common in the administrative group. Of the study population, 59.1% were smokers. Tobacco addiction significantly increased cough and dyspnea [OR= 1.10 (1.00-1.20, 95% CI) p= 0.007 and OR= 1.08 (1.02-1.14, 95% CI), p= 0.008, respectively]. Dust exposure was correlated with the incidence of a cough [OR= 0.20 (0.04-0.80, 95% CI) p= 0.008]. The period of work correlated with sputum production [OR= 1.00 (1.00-1.02, 95% CI) p= 0.044]. The FVC% was significantly higher in the administrative group, and FEV1/FVC and DLCO were higher in the exposed group. Tobacco addiction increased the risk of airflow limitation, as evaluated by FEV1/FVC < 70% and FEF25-75 < 50% [OR= 1.15 (1.06-1.25, 95% CI) p= 0.001 and OR= 1.09 (1.02-1.17, 95% CI) p= 0.010, respectively]. Tobacco addiction and increasing duration of work had a negative influence on DLCO in the exposed group (r= -0.270, p= 0.025 and r= -0.210, p= 0.037). In the exposed group PEF variability was significantly greater on workdays, compared with rest days. This study shows that tobacco consumption has a greater affect on the airways than PVC dust exposure. A median of 36 months exposure to PVC dust had no significant impact on pulmonary function parameters, except for DLCO and PEF variability.

  11. Effects of Cations on Corrosion of Inconel 625 in Molten Chloride Salts

    NASA Astrophysics Data System (ADS)

    Zhu, Ming; Ma, Hongfang; Wang, Mingjing; Wang, Zhihua; Sharif, Adel

    2016-04-01

    Hot corrosion of Inconel 625 in sodium chloride, potassium chloride, magnesium chloride, calcium chloride and their mixtures with different compositions is conducted at 900°C to investigate the effects of cations in chloride salts on corrosion behavior of the alloy. XRD, SEM/EDS were used to analyze the compositions, phases, and morphologies of the corrosion products. The results showed that Inconel 625 suffers more severe corrosion in alkaline earth metal chloride molten salts than alkaline metal chloride molten salts. For corrosion in mixture salts, the corrosion rate increased with increasing alkaline earth metal chloride salt content in the mixture. Cations in the chloride molten salts mainly affect the thermal and chemical properties of the salts such as vapor pressure and hydroscopicities, which can affect the basicity of the molten salt. Corrosion of Inconel 625 in alkaline earth metal chloride salts is accelerated with increasing basicity.

  12. A study of the effects of nickel chloride and calcium chloride on hydration of Portland cement

    SciTech Connect

    Akhter, H.; Cartledge, F.K.; Roy, A.; Tittlebaum, M.E. . Department of Chemistry and Institute for Recyclable Materials)

    1993-07-01

    Portland cement samples containing amounts of CaCl[sub 2] and NiCl[sub 2] ranging from approximately 1% to 20% by weight have been examined by [sup 29]Si and [sup 27]Al solid-state MAS NMR as a function of time, and some of the mature pastes have been characterized by X-ray diffraction. Changes in physical properties that had been previously observed as a function of amounts of salt added are clearly traceable to differences in the silicate matrices. Low concentrations of both salts promote Q[sup 1] formation, but high concentrations result in formation of much more Q[sup 2] at the expense of Q[sup 1]. Both salts accelerate both aluminate and silicate hydration, and the effects appear to be almost entirely due to chloride. Minor variations in hydration rates at high Ni concentrations may be the result of nickel salt precipitation.

  13. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    PubMed

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs. PMID:26512798

  14. Aspergilli Response to Benzalkonium Chloride and Novel-Synthesized Fullerenol/Benzalkonium Chloride Nanocomposite

    PubMed Central

    Unković, Nikola; Ljaljević Grbić, Milica; Stupar, Miloš; Vukojević, Jelena; Janković, Vesna; Jović, Danica; Djordjević, Aleksandar

    2015-01-01

    A comprehensive comparative analysis of antifungal potential of benzalkonium chloride and newly synthesized fullerenol/benzalkonium chloride nanocomposite was conducted to assess the possible impact of carbon-based nanocarrier on antimicrobial properties of the commonly used biocide. Physical characterization of synthesized nanocomposite showed zeta potential of +37.4 mV and inhomogeneous particles size distribution, with nanocomposite particles' dimensions within 30–143 nm and maximum number of particles at 44 nm. The effect of pure and fullerenol nanocarrier-bound biocide was evaluated in eight Aspergillus species. In mycelial growth assay, nanocomposite was more potent, as fungicidal effect of 1.04/0.6 μg mL−1 was obtained in all but one of the isolates (A. niger), while proportional concentration of pure biocide (0.6 μg mL−1) completely inhibited mycelial growth of only three Aspergillus species. However, conidia appear to be less susceptible to nanocomposite treatment, as lower fungistatic (MIC) and fungicidal (MFC) concentrations were obtained with biocide alone (MIC in range from 0.03 to 0.15 μg mL−1 and MFC from 0.075 to 0.45 μg mL−1). To a different degree, both substances stimulated aflatoxin B1 production and inhibited ochratoxin A synthesis. Very low mycelium biomass yield, in range from 1.0 to 3.0 mg dry weight, was documented in both biocide and nanocomposite enriched medium. PMID:26295057

  15. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    PubMed

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs.

  16. Recurring Slope Lineae (RSL) and Chloride Hydrates within Mars Subsurface

    NASA Astrophysics Data System (ADS)

    Lu, Y.; Wang, A.

    2012-12-01

    RSL is an important phenomenon revealed by HiRISE-MRO observations on Mars (McEwen et al., 2011). The RSL form and grow on some equator-facing slopes during warm seasons on Mars when temperature (T in afternoon) is in the range of ~250-300K. We hypothesize that chloride hydrates may exist in some areas within the subsurface of southern hemisphere on Mars, and the deliquescence of these chloride hydrates at elevated temperature may have produced large quantity of brine that caused the RSL observed by HiRISE team. This hypothesis is based on three lines of reasoning: (1) chlorine (Cl) is found to be broadly distributed on Mars (GRS-ODY) and has been detected in the chemistry of every surface samples during all Mars surface exploration missions (Vikings, Pathfinder, Spirit, Opportunity, and Phoenix). In addition, the existence of chlorides in martian southern hemisphere was suggested by a set of THEMIS-ODY data analyses (Osterloo et al., 2008, 2010). In terrestrial saline playas, large amounts of chlorides invariably appears in the precipitates from salty brines (Zheng et al., 2009, Wang et al., 2009), although the precipitation sequence of chlorides on Mars might be different from that on Earth (Tosca et al., 2008, McLennan et al., 2012). (2) A subsurface layer when enriched with ice, or hydrous sulfates or chloride hydrates (all have high thermal inertia) and covered by a dry layer of surface soils (very low thermal inertia) will be able to maintain a lower Tmax and a much smaller delta-T that are not affected by the large temperature variations at Mars surface during diurnal and seasonal cycles (Mellon, 2004). (3) Chloride hydrates (such as MgCl2.12H2O, FeCl2.6H2O, CaCL2.6H2O, etc) would form from Cl-bearing brine at low T; they would be stable in a large T range (beyond room T in lab) and their deliquescence would occur abruptly at elevated temperatures (Baumgartner & Bakker 2009, and many others). We have started a systematic laboratory investigation on the

  17. Elusive Presence of Chloride in Mixed Halide Perovskite Solar Cells.

    PubMed

    Colella, Silvia; Mosconi, Edoardo; Pellegrino, Giovanna; Alberti, Alessandra; Guerra, Valentino L P; Masi, Sofia; Listorti, Andrea; Rizzo, Aurora; Condorelli, Guglielmo Guido; De Angelis, Filippo; Gigli, Giuseppe

    2014-10-16

    The role of chloride in the MAPbI3-xClx perovskite is still limitedly understood, albeit subjected of much debate. Here, we present a combined angle-resolved X-ray photoelectron spectroscopy (AR-XPS) and first-principles DFT modeling to investigate the MAPbI3-xClx/TiO2 interface. AR-XPS analyses carried out on ad hoc designed bilayers of MAPbI3-xClx perovskite deposited onto a flat TiO2 substrate reveal that the chloride is preferentially located in close proximity to the perovskite/TiO2 interface. DFT calculations indicate the preferential location of chloride at the TiO2 interface compared to the bulk perovskite due to an increased chloride-TiO2 surface affinity. Furthermore, our calculations clearly demonstrate an interfacial chloride-induced band bending, creating a directional "electron funnel" that may improve the charge collection efficiency of the device and possibly affecting also recombination pathways. Our findings represent a step forward to the rationalization of the peculiar properties of mixed halide perovskite, allowing one to further address material and device design issues. PMID:26278605

  18. Interactions between chloride and cement-paste materials.

    PubMed

    Barberon, Fabien; Baroghel-Bouny, Véronique; Zanni, Hélène; Bresson, Bruno; d'Espinose de la Caillerie, Jean-Baptiste; Malosse, Lucie; Gan, Zehong

    2005-02-01

    The durability of cement-based materials with respect to exterior aggressions is one of the current priorities in civil engineering. Depending on their use, the cement-based materials can be exposed to different types of aggressive environments. For instance, damages to concrete structures in contact with a saline environment (sea water on bridges, deicing salts on roads, etc.) are of utmost importance. Upon exposure to saline water, Cl- ions penetrate into the structures and subsequently lead to reinforcement corrosion. Chloride attack is often combined with other aggressive influences such as temperature (e.g., freezing) or the ingress of other ions (e.g., sulfates in sea water). We therefore aim to explore the effect of sodium chloride (NaCl) on the structural chemistry of cement paste. Existing studies about reinforcement corrosion by chloride have focused on the penetration of Cl- ions and the comparison between "free" ions (water-soluble ions) and bound ones. However, little is known about the fixation mechanisms, the localization of Cl in the cement matrix and the structural interaction between Cl and the silicate and aluminate hydrate phases present in cement paste. We present here results of a multinuclear nuclear magnetic resonance study on the fixation of chloride in the hydration products and the characterization of new phases potentially appearing due to chloride ingress.

  19. Antiangiogenic activity of 2-formyl-8-hydroxy-quinolinium chloride.

    PubMed

    Lam, K-H; Lee, K K-H; Kok, S H-L; Wong, R S-M; Lau, F-Y; Cheng, G Y-M; Wong, W-Y; Tong, S-W; Chan, K-W; Chan, R Y-K; Tang, J C-O; Cheng, C-H; Hau, D K-P; Bian, Z-X; Gambari, R; Chui, C-H

    2016-05-01

    Tumour growth is closely related to the development of new blood vessels to supply oxygen and nutrients to cancer cells. Without the neovascular formation, tumour volumes cannot increase and undergo metastasis. Antiangiogenesis is one of the most promising approaches for antitumour therapy. The exploration of new antiangiogenic agents would be helpful in antitumour therapy. Quinoline is an aromatic nitrogen compound characterized by a double-ring structure which exhibits a benzene ring fused to pyridine at two adjacent carbon atoms. The high stability of quinoline makes it preferable in a variety of therapeutic and pharmaceutical applications, including antitumour treatment. This work is to examine the potential antiangiogenic activity of the synthetic compound 2-Formyl-8-hydroxy-quinolinium chloride. We found that 2-Formyl-8-hydroxy-quinolinium chloride could inhibit the growth of human umbilical vein endothelial cells in vitro. Using the diethylnitrosamine-induced hepatocarcinogenesis model, 2-Formyl-8-hydroxy-quinolinium chloride showed strong antiangiogenic activity. Furthermore, 2-Formyl-8-hydroxy-quinolinium chloride could inhibit the growth of large Hep3B xenografted tumour from the nude mice. We assume that 2-Formyl-8-hydroxy-quinolinium chloride could be a potential antiangiogenic and antitumour agent and it is worthwhile to further study its underlying working mechanism. PMID:27133051

  20. Development and critical evaluation of fluorescent chloride nanosensors.

    PubMed

    Graefe, Anja; Stanca, Sarmiza E; Nietzsche, Sandor; Kubicova, Lenka; Beckert, Rainer; Biskup, Christoph; Mohr, Gerhard J

    2008-09-01

    In this study, we describe the preparation and evaluation of new fluorescent sensor nanoparticles for the ratiometric measurement of chloride concentrations. Both a chloride-sensitive dye (lucigenin) and a reference dye (sulforhodamine derivative) were incorporated into polyacrylamide nanoparticles via inverse microemulsion polymerization and investigated for their response to chloride ions in buffered suspension as well as in living cells. The fluorescence intensity of lucigenin reversibly decreased in the presence of chloride ions due to a collisional quenching process, which can be described with the Stern-Volmer equation. The determined Stern-Volmer constant K SV for the quenching of lucigenin incorporated into particles was found to be 53 M (-1) and is considerably smaller than the Stern-Volmer constant for quenching of free lucigenin ( K SV = 250 M (-1)) under the same conditions. To test the nanosensors in living cells, we incorporated them into Chinese hamster ovary cells and mouse fibroblasts by using the conventional lipofectamin technique and monitored the response to changing chloride concentrations in the cell.

  1. Enhancement of trichothecene production in Fusarium graminearum by cobalt chloride.

    PubMed

    Tsuyuki, Rie; Yoshinari, Tomoya; Sakamoto, Naoko; Nagasawa, Hiromichi; Sakuda, Shohei

    2011-03-01

    The effects of cobalt chloride on the production of trichothecene and ergosterol in Fusarium graminearum were examined. Incorporation experiments with (13)C-labeled acetate and leucine confirmed that both 3-acetyldeoxynivalenol and ergosterol were biosynthesized via a mevalonate pathway by the fungus, although hydroxymethyl-glutaryl CoA (HMG-CoA) from intact leucine was able to be partially used for ergosterol production. Addition of cobalt chloride at concentrations of 3-30 μM into liquid culture strongly enhanced 3-acetyldeoxynivalenol production by the fungus, whereas the amount of ergosterol and the mycelial weight of the fungus did not change. The mRNA levels of genes encoding trichothecene biosynthetic proteins (TRI4 and TRI6), ergosterol biosynthetic enzymes (ERG3 and ERG25), and enzymes involved in the mevalonate pathway (HMG-CoA synthase (HMGS) and HMG-CoA reductase (HMGR)) were all strongly up-regulated in the presence of cobalt chloride. Precocene II, a specific trichothecene production inhibitor, suppressed the effects of cobalt chloride on Tri4, Tri6, HMGS, and HMGR, but did not affect erg3 and erg25. These results indicate that cobalt chloride is useful for investigating regulatory mechanisms of trichothecene and ergosterol production in F. graminearum.

  2. Evaluation of a hydrogen chloride detector for environmental monitoring

    NASA Technical Reports Server (NTRS)

    Gregory, G. L.; Moyer, R. H.

    1977-01-01

    The paper describes a hydrogen chloride detector designed to monitor concentrations of hydrogen chloride gas in the ambient environment. The detector was developed for NASA for use in launch vehicle effluent monitoring. The detector operates on chemiluminescence principles with a lower detection limit of less than 5 x 10 to the -3rd ppm (by volume). The hydrogen chloride in the air sample reacts with a bromide-bromate coating in the inlet tube of the instrument producing bromine. Bromine is then quantitated by chemiluminescent oxidation of luminol. The visible light generated in the chemiluminescent reaction is proportional to the hydrogen chloride concentration of the sampled airstream. The detector is most suited to laboratory or field studies where hydrogen chloride is the dominant pollutant, as compared to the interfering species. Interferences include strong acids, acid-forming gases, and halogen gases. Of the interferences investigated the most serious in these groups are hydrochloric and sulfuric acid, sulfur dioxide, and chlorine, respectively. The detector has been in use since 1974 and has been found to be highly portable, rugged, and stable under extreme environmental conditions.

  3. Pulmonary effects of polyvinyl chloride dust exposure on compounding workers.

    PubMed

    Ng, T P; Lee, H S; Low, Y M; Phoon, W H; Ng, Y L

    1991-02-01

    Spirometry, chest radiography, environmental measurements, and a questionnaire on respiratory symptoms were used to evaluate the effects of exposure to polyvinyl chloride (PVC) dust on 171 Chinese and Malay PVC compounding workers in comparison with an unexposed reference group. Workers with high cumulative PVC dust exposure had a lower forced expiratory volume in 1 s and forced vital capacity, and a higher prevalence of radiological profusion of small opacities. Wheezing or chest tightness was also significantly more frequent in this group. Unlike previous studies, the PVC compounding workers in this study were exposed to only negligible amounts, if any, of vinyl chloride monomer or thermal degradation products of PVC such as hydrogen chloride, phosgene, or chlorine. The conclusion was drawn that a low grade of pneumoconiosis and a small degree of lung function impairment is associated with PVC dust exposure. Reversible airways obstruction is also likely and warrants further investigation.

  4. Reflectance measurements of cotton leaf senescence altered by mepiquat chloride

    NASA Technical Reports Server (NTRS)

    Gausman, H. W.; Escobar, D. E.; Rodriguez, R. R. (Principal Investigator)

    1982-01-01

    Spectrophotometric reflectance measurements were made on plant-attached leaves to evaluate growth chamber-grown cotton leaf (Gossypium hirsutum L.) senescence (chlorophyll degradation as criterion) that was delayed by mepiquat chloride (1,1-dimethylpiperidinium chloride) rates of 0, 10, 40, 70, and 100 g a.i./ha. Mepiquat chloride (MC increased both chlorophyll and leaf water contents as compared with that of untreated leaves. Reflectance was inversely and linearly correlated (r = -0.873**) with eater content at the 1.65 micrometer wavelength and was inversely correlated (r = -0.812**) with chlorophyll concentration at the 0.55 micrometer wavelength but best fit a quadratic equation. Either wavelength measurement might be useful to remotely detect cotton leaf senescence or fields of MC-treated cotton plants.

  5. Cadmium chloride susceptibility, a characteristic of Campylobacter spp.

    PubMed Central

    Kazmi, S U; Roberson, B S; Stern, N J

    1985-01-01

    We report a simple diagnostic characteristic useful in the presumptive identification of Campylobacter jejuni and Campylobacter coli. Filter paper disks impregnated with cadmium chloride were placed on streaked agar medium. Zones of growth inhibition for Campylobacter spp. occurred at 1.25 micrograms per disk. Other enteropathogens (Salmonella spp., Shigella spp., Vibrio cholerae, Vibrio parahaemolyticus, Escherichia coli, and Yersinia enterocolitica) were resistant to at least 40 micrograms per disk, with the exception of a strain of Shigella flexneri, which showed first susceptibility at 10 micrograms per disk. Most of the 52 Campylobacter strains, which were isolated from human clinical and animal sources, showed zones of inhibition greater than 10 mm with 2.5 micrograms of cadmium chloride per disk. At 20 micrograms per disk, Campylobacter isolates from clinical sources were significantly (P less than 0.01) more susceptible to cadmium chloride inhibition than were those from meat samples. Images PMID:3998099

  6. Novel vanadium chloride/polyhalide redox flow battery

    NASA Astrophysics Data System (ADS)

    Skyllas-Kazacos, Maria

    This paper describes a novel redox flow cell which employs a polyhalide solution in the positive half-cell electrolyte and a vanadium(II)/vanadium(III) chloride redox couple as the negative half-cell electrolyte. During charging, the bromide ions in the positive half-cell are considered to undergo oxidation to the polyhalide ion Br 2Cl -; the formal potential of this couple is about 0.8 V versus the saturated calomel electrode (SCE). When combined with a formal potential of around -0.5 V versus SCE for the V(III)/V(III) coupled in the chloride supporting electrolyte, an overall cell potential of approximately 1.3 V would be expected for the vanadium chloride/polyhalide redox flow cell.

  7. Optimization of the lithium/thionyl chloride battery

    NASA Technical Reports Server (NTRS)

    White, Ralph E.

    1989-01-01

    A 1-D math model for the lithium/thionyl chloride primary cell is used in conjunction with a parameter estimation technique in order to estimate the electro-kinetic parameters of this electrochemical system. The electro-kinetic parameters include the anodic transfer coefficient and exchange current density of the lithium oxidation, alpha sub a,1 and i sub o,i,ref, the cathodic transfer coefficient and the effective exchange current density of the thionyl chloride reduction, alpha sub c,2 and a sup o i sub o,2,ref, and a morphology parameter, Xi. The parameter estimation is performed on simulated data first in order to gain confidence in the method. Data, reported in the literature, for a high rate discharge of an experimental lithium/thionyl chloride cell is used for an analysis.

  8. Vanadium oxychloride/magnesium electrode systems for chloride ion batteries.

    PubMed

    Gao, Ping; Zhao, Xiangyu; Zhao-Karger, Zhirong; Diemant, Thomas; Behm, R Jürgen; Fichtner, Maximilian

    2014-12-24

    We report a new type of rechargeable chloride ion battery using vanadium oxychloride (VOCl) as cathode and magnesium or magnesium/magnesium chloride (MgCl2/Mg) as anode, with an emphasis on the VOCl-MgCl2/Mg full battery. The charge and discharge mechanism of the VOCl cathode has been investigated by X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical measurements, demonstrating the chloride ion transfer during cycling. The VOCl cathode can deliver a reversible capacity of 101 mAh g(-1) at a current density of 10 mA g(-1) and a capacity of 60 mAh g(-1) was retained after 53 cycles in this first study.

  9. Susceptibility testing of Atopobium vaginae for dequalinium chloride

    PubMed Central

    2012-01-01

    Background Atopobium vaginae and Gardnerella vaginalis are major markers for bacterial vaginosis. We aimed to determine the MIC and MBC range of the broad-spectrum anti-infective and antiseptic dequalinium chloride for 28 strains, belonging to 4 species of the genus Atopobium, i.e. A. vaginae, A. minutum, A. rimae and A. parvulum. Methods The MIC was determined with a broth microdilution assay. Results The MIC and MBC for Atopobium spp. for dequalinium chloride ranged between < 0.0625 and 2 μg/ml. Conclusions This study demonstrated that dequalinium chloride inhibits and kills clinical isolates of A. vaginae at concentrations similar to those of clindamycin and lower than those of metronidazole. PMID:22429611

  10. Vasculitic purpura in vinyl chloride disease: a case report

    SciTech Connect

    Magnavita, N.; Bergamaschi, A.; Garcovich, A.; Giuliano, G.

    1986-05-01

    Vinyl chloride (VC), a volatile substance mostly used for polyvinyl chloride (PVC) synthesis, is a systemic toxicant particularly noxious to endothelium. Angiosarcoma of the liver, Raynaud's phenomenon, scleroderma-like lesions, acroosteolysis and neuritis are known to be typical vinyl chloride-associated manifestations (VC disease). A so far unknown feature of the disease is purpura. This was first observed by the authors in a worker of a PVC-producing plant. The skin eruption was characterized by small purpuric maculae with tiny, palpable spots and papulae, mostly concentrated on the lower part of the legs, changing into bullae, pustules and crusts and tending to spontaneous regression after withdrawal from VC exposure. A skin biopsy revealed marked inflammatory reaction with a mostly lymphocytic and histiocytic infiltration around and in the walls of dermal arterioles. The finding of increased circulating immune complexes and anti-smooth muscle autoantibodies strengthens the hypothesis that immunologic changes play a role in the appearance of ''vinylic purpura.''

  11. Effect of zinc chloride on the growth and characterization of L-proline cadmium chloride monohydrate semiorganic NLO single crystals.

    PubMed

    Vetrivel, S; Anandan, P; Kanagasabapathy, K; Bhattacharya, Suman; Gopinath, S; Rajasekaran, R

    2013-06-01

    Single crystals of zinc doped L-proline cadmium chloride monohydrate were successfully grown from aqueous solution by slow evaporation method at room temperature for different molar concentration of zinc chloride. The structural properties of grown crystals have been studied by single crystal X-ray diffraction, powder X-ray diffraction studies and Fourier transform infrared spectral analysis. The incorporation of the dopant (zinc chloride) into L-proline cadmium chloride monohydrate crystal lattice has been confirmed by EDAX analysis. UV-Vis spectral analyses showed that the doped crystals have lower UV cut-off wavelength at 200 nm combined with very good transparency about 85% in a very wide range. The second harmonic generation efficiency test has been carried out and results are discussed. The 0.2 and 0.4 mol Zinc chloride doped crystals were thermally stable up to 208.9 °C and 211.9 °C respectively. The electrical properties have been studied by dielectric constant studies. All results are compared with the results of pure L-PCCM crystals. PMID:23583849

  12. Iron, copper, and nickel behavior in buffered, neutral aluminum chloride:1-methyl-3-ethylimidazolium chloride molten salt

    SciTech Connect

    Pye, S.; Winnick, J.; Kohl, P.A.

    1997-06-01

    Iron, copper, and nickel electrodes were examined as possible metal/metal(II) chloride cathodes for the room temperature sodium/metal chloride battery in a molten salt composed of sodium chloride (NaCl), aluminum chloride (AlCl{sub 3}), and 1-methyl-3-ethylimidazolium chloride (MEIC). The iron electrode was investigated in basic, neutral-like, and acidic MEIC:AlCl{sub 3} melts. The solubility and the kinetics of the reduction of Fe(II) was a function of acidity. In the basic melt, the FeCl{sub 2} was soluble; however, its reduction was not observed due to slow kinetics. In the neutral-like and acidic melts, the quasi-reversible reduction of Fe(II) to Fe(0) was observed. The redox potential of copper was approximately 1 V more positive of iron; however, the oxidized copper was soluble in the neutral-like melt, making it unacceptable without a separator. The oxidized and reduced forms of nickel were insoluble and the redox potential was 2.5 V positive of Na/Na{sup +}. The nickel electrode supported a charge density of 3.5 mC/cm{sup 2} at room temperature, suggesting that a high-surface-area electrode would be needed in a practical device.

  13. The Contribution of Raised Intraneuronal Chloride to Epileptic Network Activity

    PubMed Central

    Alfonsa, Hannah; Merricks, Edward M.; Codadu, Neela K.; Cunningham, Mark O.; Deisseroth, Karl; Racca, Claudia

    2015-01-01

    Altered inhibitory function is an important facet of epileptic pathology. A key concept is that GABAergic activity can become excitatory if intraneuronal chloride rises. However, it has proved difficult to separate the role of raised chloride from other contributory factors in complex network phenomena, such as epileptic pathology. Therefore, we asked what patterns of activity are associated with chloride dysregulation by making novel use of Halorhodopsin to load clusters of mouse pyramidal cells artificially with Cl−. Brief (1–10 s) activation of Halorhodopsin caused substantial positive shifts in the GABAergic reversal potential that were proportional to the charge transfer during the illumination and in adult neocortical pyramidal neurons decayed with a time constant of τ = 8.0 ± 2.8s. At the network level, these positive shifts in EGABA produced a transient rise in network excitability, with many distinctive features of epileptic foci, including high-frequency oscillations with evidence of out-of-phase firing (Ibarz et al., 2010). We show how such firing patterns can arise from quite small shifts in the mean intracellular Cl− level, within heterogeneous neuronal populations. Notably, however, chloride loading by itself did not trigger full ictal events, even with additional electrical stimulation to the underlying white matter. In contrast, when performed in combination with low, subepileptic levels of 4-aminopyridine, Halorhodopsin activation rapidly induced full ictal activity. These results suggest that chloride loading has at most an adjunctive role in ictogenesis. Our simulations also show how chloride loading can affect the jitter of action potential timing associated with imminent recruitment to an ictal event (Netoff and Schiff, 2002). PMID:25995461

  14. Exercise modulates chloride homeostasis after spinal cord injury.

    PubMed

    Côté, Marie-Pascale; Gandhi, Sapan; Zambrotta, Marina; Houlé, John D

    2014-07-01

    Activity-based therapies are routinely integrated in spinal cord injury (SCI) rehabilitation programs because they result in a reduction of hyperreflexia and spasticity. However, the mechanisms by which exercise regulates activity in spinal pathways to reduce spasticity and improve functional recovery are poorly understood. Persisting alterations in the action of GABA on postsynaptic targets is a signature of CNS injuries, including SCI. The action of GABA depends on the intracellular chloride concentration, which is determined largely by the expression of two cation-chloride cotransporters (CCCs), KCC2 and NKCC1, which serve as chloride exporters and importers, respectively. We hypothesized that the reduction in hyperreflexia with exercise after SCI relies on a return to chloride homeostasis. Sprague Dawley rats received a spinal cord transection at T12 and were assigned to SCI-7d, SCI-14d, SCI-14d+exercise, SCI-28d, SCI-28d+exercise, or SCI-56d groups. During a terminal experiment, H-reflexes were recorded from interosseus muscles after stimulation of the tibial nerve and the low-frequency-dependent depression (FDD) was assessed. We provide evidence that exercise returns spinal excitability and levels of KCC2 and NKCC1 toward normal levels in the lumbar spinal cord. Acutely altering chloride extrusion using the KCC2 blocker DIOA masked the effect of exercise on FDD, whereas blocking NKCC1 with bumetanide returned FDD toward intact levels after SCI. Our results indicate that exercise contributes to reflex recovery and restoration of endogenous inhibition through a return to chloride homeostasis after SCI. This lends support for CCCs as part of a pathway that could be manipulated to improve functional recovery when combined with rehabilitation programs.

  15. Production and mitigation of acid chlorides in geothermal steam

    SciTech Connect

    Simonson, J.M.; Palmer, D.A.

    1995-06-01

    Measurements of the equilibrium distribution of relatively nonvolatile solutes between aqueous liquid and vapor phases have been made at temperatures to 350{degrees}C for HCl(aq) and chloride salts. These data are directly applicable to problems of corrosive-steam production in geothermal steam systems. Compositions of high-temperature brines which could produce steam having given concentrations of chlorides may be estimated at various boiling temperatures. Effects of mitigation methods (e.g., desuperheating) can be calculated based on liquid-vapor equilibrium constants and solute mass balances under vapor-saturation conditions.

  16. Electronic properties of the silver-silver chloride cluster interface.

    PubMed

    Glaus, Stephan; Calzaferri, Gion; Hoffmann, Roald

    2002-04-15

    The objective of this study was to gain insight into the electronic structure of silver-silver chloride cluster composites and especially into the metal-semiconductor interface. For this purpose a theoretical study of (AgCl)(n) (n=4, 32, 108, 192, and 256), of Ag(m) (m=1-9, 30, 115, 276, and 409), and of the cluster composites Ag(115)-(AgCl)(192) and Ag(409)-(AgCl)(192) has been carried out. Density of levels (DOL), local density of levels (l-DOL), and projection of surface states, as well as projection of properties of individual atoms or groups of atoms obtained in molecular orbital calculations, are shown to be powerful tools for gaining deep insight into the properties of these large systems. The Ag(115)-(AgCl)(192) aggregate, consisting of a cubic Ag(115) cluster without corner atoms on top of a cubic (AgCl)(192) cluster, was found to be remarkably stable with a cluster-to-cluster distance of about 280 pm, and a geometry in which the number of bonding interactions between the silver atoms of Ag(115) and the chloride ions of (AgCl)(192) is at its maximum. A sharp jump in charge distribution occurs at the Ag(115)-(AgCl)(192) composite interface. The first AgCl slab picks up negative charge from the two adjacent silver slabs, so that in total the silver cluster is positively charged. In addition, the core of the silver cluster is positively charged with respect to its outermost layer. The main reason for the charge transfer from the silver cluster to the silver chloride is the newly formed MIGS (metal induced gap states) in the energy-gap range of the silver chloride and the MIdS (metal induced d states) in the d-orbital region. Their wave functions mix with orbitals of the silver cluster and with both the orbitals of the silver and the chloride ions of the silver chloride. The MIGS and the MIdS are of a quite localized nature. In them, nearest neighbor interactions dominate, with the exception of close-lying silver chloride surface states-which mix in to a large

  17. Importance of magnesium chloride repletion after myocardial infarction.

    PubMed

    Sheehan, J

    1989-04-18

    Data pertinent to the role of magnesium deficits in coronary artery disease and myocardial infarction are reviewed. Results of clinical, laboratory and epidemiologic studies indicate an association between magnesium deficiency and a poor prognostic outcome in patients who have had myocardial infarction. It therefore appears to be a reasonable prophylactic measure to monitor closely magnesium status in patients with coronary heart disease and other patients at risk of acute myocardial infarction, and to supplement with magnesium chloride when clinically necessary. In addition, recent studies provide supportive evidence that supplementation of magnesium chloride may reduce the incidence of fatal and nonfatal arrhythmias after an infarct.

  18. Inhibitory effects of beryllium chloride on rat liver microsomal enzymes.

    PubMed

    Teixeira, C F; Yasaka, W J; Silva, L F; Oshiro, T T; Oga, S

    1990-04-30

    A single i.v. dose (0.1 mmol Be2+/kg) of beryllium chloride prolonged the duration of pentobarbital-induced sleep and zoxazolamine-induced paralysis, in rats. The effects are correlated with changes of the pharmacokinetic parameters and with the in vitro inhibition of both aliphatic and aromatic hydroxylation of pentobarbital and zoxazolamine. In vitro N-demethylation of meperidine and aminopyrine was partially inhibited while O-demethylation of quinidine was unaffected by liver microsomes of rats pretreated with beryllium salt. The findings give clues that beryllium chloride inhibits some forms of cytochrome P-450, especially those responsible for hydroxylation of substrates, like pentobarbital and zoxazolamine.

  19. 4-Carboxy­pyridazin-1-ium chloride

    PubMed Central

    Starosta, Wojciech; Leciejewicz, Janusz

    2008-01-01

    The structure of the title compound, C5H5N2O2 +·Cl−, is composed of chloride anions and 4-carboxy­pyridazin-1-ium cations. Chloride anions bridge the cations via O—H⋯Cl and N—H⋯Cl hydrogen bonds to form ribbons. The latter, linked by van der Waals forces with lengths in the range 3.254 (2)–3.497 (2) Å, form coplanar layers. Very weak inter­actions operate also between adjacent layers, as indicated by their spacing of 3.339 (1) Å. PMID:21203256

  20. Chronic effects of mercuric chloride ingestion on rat adrenocortical function

    SciTech Connect

    Agrawal, R.; Chansouria, J.P.N. )

    1989-09-01

    Mercurial contamination of environment has increased. Mercury accumulates in various organs and adversely affects their functions. Some of the most prominent toxic effects of inorganic mercury compounds include neurotoxicity, hepatotoxicity and nephrotoxicity. Besides this, mercury has also been reported to affect various endocrine glands like pituitary, thyroid, gonadal and adrenal glands. There have been no reports on the toxic effects of chronic oral administration of varying doses of mercuric chloride on adrenocortical function in albino rats. The present work was undertaken to study the adrenocortical response to chronic oral administration of mercuric chloride of varying dose and duration in albino rats.

  1. Physicochemical changes in dry-cured hams salted with potassium, calcium and magnesium chloride as a partial replacement for sodium chloride.

    PubMed

    Aliño, M; Grau, R; Toldrá, F; Barat, J M

    2010-10-01

    The reduction of added sodium chloride in dry-cured ham has been proposed to reduce dietary sodium intake in Mediterranean countries. The effect of substituting sodium chloride with potassium chloride, calcium chloride and magnesium chloride on some physicochemical characteristics of dry-cured ham during processing was evaluated. The results showed that hams salted with a mixture of sodium and potassium chloride registered higher salt concentrations and lower water contents and thus, needed less time to reach the required weight loss at the end of the process. The opposite effect was observed when calcium and magnesium chloride were added to the salt mixture. The observed differences in the texture and colour parameters were mainly due to differences in water and salt content.

  2. Production of anhydrous aluminum chloride composition and process for electrolysis thereof

    DOEpatents

    Vandegrift, George F.; Krumpelt, Michael; Horwitz, E. Philip

    1983-01-01

    A process for producing an anhydrous aluminum chloride composition from a water-based aluminous material such as a slurry of aluminum hydroxide in a multistage extraction process in which the aluminum ion is first extracted into an organic liquid containing an acidic extractant and then extracted from the organic phase into an alkali metal chloride or chlorides to form a melt containing a mixture of chlorides of alkali metal and aluminum. In the process, the organic liquid may be recycled. In addition, the process advantageously includes an electrolysis cell for producing metallic aluminum and the alkali metal chloride or chlorides may be recycled for extraction of the aluminum from the organic phase.

  3. Repassivation Potential of Alloy 22 in Sodium and Calcium Chloride Brines

    SciTech Connect

    Rebak, R B; Ilevbare, G O; Carranza, R M

    2007-08-11

    A comprehensive matrix of 60 tests was designed to explore the effect of calcium chloride vs. sodium chloride and the ratio R of nitrate concentration over chloride concentration on the repassivation potential of Alloy 22. Tests were conducted using the cyclic potentiodynamic polarization (CPP) technique at 75 C and at 90 C. Results show that at a ratio R of 0.18 and higher nitrate was able to inhibit the crevice corrosion in Alloy 22 induced by chloride. Current results fail to show in a consistent way a different effect on the repassivation potential of Alloy 22 for calcium chloride solutions than for sodium chloride solutions.

  4. Skin and soft tissue necrosis from calcium chloride in a deicer.

    PubMed

    Kim, Min P; Raho, Vittorio J; Mak, John; Kaynar, A Murat

    2007-01-01

    Calcium chloride salt is the principle ingredient of many commercially available deicers. Calcium chloride melts snow and ice by its osmotic action. We present a case of skin and soft tissue necrosis associated with the use of a calcium chloride-containing deicer. Although calcium chloride is known to produce soft tissue necrosis if it extravasates during intravenous administration, necrosis and skin sloughing has rarely been described after topical exposure to this salt. Calcium chloride likely produces tissue injury from the heat liberated by mixing calcium chloride with water (exothermic reaction) and from direct calcium deposits in the skin (calcinosis cutis) and soft tissue.

  5. Mortality from liver disease among Italian vinyl chloride monomer/polyvinyl chloride manufacturers.

    PubMed

    Pirastu, R; Comba, P; Reggiani, A; Foa, V; Masina, A; Maltoni, C

    1990-01-01

    The possible association in humans between nonangiosarcoma primary liver tumors (PLC-non-A), particularly hepatocellular carcinoma (HCC), and exposure to vinyl chloride monomer (VCM) is supported by both experimental and human data. This article presents a review of the information regarding 253 deaths that occurred in seven plants manufacturing VCM/PVC and one plant extruding PVC. The retrieval of clinical and pathological data, in addition to the information from death certificate, is referred to as "best evidence" (BE). BE has been carried out for 63 deaths. A total of 14 primary liver cancer (PLC) were detected: seven were angiosarcoma (PLC-A), and two of the remaining seven were hepatocellular carcinoma (HCC). In our series of 14 PLC cases, there was no significant difference between PLC-A and PLC-non-A as to length of exposure and latency. There was no noticeable difference in terms of job title between ASL and non-ASL cases. The list of longest held jobs shows the presence of various job titles, different from autoclave cleaner, for primary liver cancer, PLC-A and PLC-non-A. In conclusion, our observations show that VCM may have a broader carcinogenicity action on the liver and that exposure lower than that occurring in autoclave cleaning can cause primary liver cancer, both angiosarcoma and nonangiosarcoma.

  6. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution

    PubMed Central

    Ha, Hung; Payer, Joe

    2011-01-01

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer. PMID:21516171

  7. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution.

    PubMed

    Ha, Hung; Payer, Joe

    2011-02-28

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer.

  8. [Evaluation of professional exposure to chloride vinyl monomer and vinyl idene chloride for a pharmaceutical packaging worker].

    PubMed

    Dorsi, F; De Grandis, D; Laurelli, R; Narda, R; Pietrantonio, E; Scarlini, E; Soldati, P S

    2007-01-01

    The study was conducted by Judicial Policy investigations of Prosecution's Office. The event was connected by a professional founded suspicion disease of a pharmaceutical worker. First information coming from the Authority indicated a chloride vinyl monomer (CVM) exposure. We applied a chemical risk assessment method to estimate real professional exposure. The method was based on the productive cycle, physical and chemical and toxicological properties. The method combined to environmental data permitted to formulate etiological hypothesis. The worker during drugs packaging was exposed to CVM and vinylidene chloride (CVDM) caused by blister warming and by glue deposition. We explain the evaluations by which we could consider the pollutant different distribution in workplaces.

  9. Formaldoxime hydrogen bonded complexes with ammonia and hydrogen chloride

    NASA Astrophysics Data System (ADS)

    Golec, Barbara; Mucha, Małgorzata; Sałdyka, Magdalena; Barnes, Austin; Mielke, Zofia

    2015-02-01

    An infrared spectroscopic and MP2/6-311++G(2d,2p) study of hydrogen bonded complexes of formaldoxime with ammonia and hydrogen chloride trapped in solid argon matrices is reported. Both 1:1 and 1:2 complexes between formaldoxime and ammonia, hydrogen chloride have been identified in the CH2NOH/NH3/Ar, CH2NOH/HCl/Ar matrices, respectively, their structures were determined by comparison of the spectra with the results of calculations. In the 1:1 complexes present in the argon matrices the OH group of formaldoxime acts as a proton donor for ammonia and the nitrogen atom acts as a proton acceptor for hydrogen chloride. In the 1:2 complexes ammonia or hydrogen chloride dimers interact both with the OH group and the nitrogen atom of CH2NOH to form seven membered cyclic structures stabilized by three hydrogen bonds. The theoretical spectra generally agree well with the experimental ones, but they seriously underestimate the shift of the OH stretch for the 1:1 CH2NOH⋯NH3 complex.

  10. Preparation and Spectrophotometric Analysis of Hexaamminenickel(II) Chloride.

    ERIC Educational Resources Information Center

    Wieder, Grace M.

    1986-01-01

    Describes an experiment developed at Brooklyn College (New York) in which the preparation and ammonia analysis of an amminenickel(II) chloride is extended to include a spectrophotometric analysis for nickel. Discusses the materials needed and the procedure for the experiment which takes nine hours of laboratory work. (TW)

  11. A Green Alternative to Aluminum Chloride Alkylation of Xylene

    ERIC Educational Resources Information Center

    Sereda, Grigoriy A.; Rajpara, Vikul B.

    2007-01-01

    An acutely less toxic 2-bromobutane is used to develop a simple graphite-promoted procedure of alkylation of p-xylene. It is further demonstrated that aluminum chloride is not required, the need for aqueous workup is eliminated, waste solutions are not produced and the multiple use of the catalyst is allowed.

  12. Using polyvinyl chloride dyed with bromocresol purple in radiation dosimetry.

    PubMed

    Kattan, Munzer; al Kassiri, Haroun; Daher, Yarob

    2011-02-01

    Polyvinyl chloride (PVC) dyed with bromocresol purple was investigated as a high-dose radiation dosimeter. The absorbance at 417 nm depends linearly on the dose below 50 kGy. The response depends neither on dose rate nor on the irradiation temperature. The effects of post-irradiation storage in the dark and in indirect sunlight are also discussed.

  13. Oxidative dehydrogenation of ethane on dynamically rearranging supported chloride catalysts.

    PubMed

    Gärtner, Christian A; van Veen, André C; Lercher, Johannes A

    2014-09-10

    Ethane is oxidatively dehydrogenated with a selectivity up to 95% on catalysts comprising a mixed molten alkali chloride supported on a mildly redox-active Dy2O3-doped MgO. The reactive oxyanionic OCl(-) species acting as active sites are catalytically formed by oxidation of Cl(-) at the MgO surface. Under reaction conditions this site is regenerated by O2, dissolving first in the alkali chloride melt, and in the second step dissociating and replenishing the oxygen vacancies on MgO. The oxyanion reactively dehydrogenates ethane at the melt-gas phase interface with nearly ideal selectivity. Thus, the reaction is concluded to proceed via two coupled steps following a Mars-van-Krevelen-mechanism at the solid-liquid and gas-liquid interface. The dissociation of O2 and/or the oxidation of Cl(-) at the melt-solid interface is concluded to have the lowest forward rate constants. The compositions of the oxide core and the molten chloride shell control the catalytic activity via the redox potential of the metal oxide and of the OCl(-). Traces of water may be present in the molten chloride under reaction conditions, but the specific impact of this water is not obvious at present. The spatial separation of oxygen and ethane activation sites and the dynamic rearrangement of the surface anions and cations, preventing the exposure of coordinatively unsaturated cations, are concluded to be the origin of the surprisingly high olefin selectivity. PMID:25118821

  14. Formaldoxime hydrogen bonded complexes with ammonia and hydrogen chloride.

    PubMed

    Golec, Barbara; Mucha, Małgorzata; Sałdyka, Magdalena; Barnes, Austin; Mielke, Zofia

    2015-02-01

    An infrared spectroscopic and MP2/6-311++G(2d,2p) study of hydrogen bonded complexes of formaldoxime with ammonia and hydrogen chloride trapped in solid argon matrices is reported. Both 1:1 and 1:2 complexes between formaldoxime and ammonia, hydrogen chloride have been identified in the CH2NOH/NH3/Ar, CH2NOH/HCl/Ar matrices, respectively, their structures were determined by comparison of the spectra with the results of calculations. In the 1:1 complexes present in the argon matrices the OH group of formaldoxime acts as a proton donor for ammonia and the nitrogen atom acts as a proton acceptor for hydrogen chloride. In the 1:2 complexes ammonia or hydrogen chloride dimers interact both with the OH group and the nitrogen atom of CH2NOH to form seven membered cyclic structures stabilized by three hydrogen bonds. The theoretical spectra generally agree well with the experimental ones, but they seriously underestimate the shift of the OH stretch for the 1:1 CH2NOH⋯NH3 complex.

  15. A Simple Quantitative Synthesis: Sodium Chloride from Sodium Carbonate.

    ERIC Educational Resources Information Center

    Gold, Marvin

    1988-01-01

    Describes a simple laboratory procedure for changing sodium carbonate into sodium chloride by adding concentrated HCl to cause the reaction and then evaporating the water. Claims a good stoichiometric yield can be obtained in one three-hour lab period. Suggests using fume hood for the reaction. (ML)

  16. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740 Section 154.1740 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Special Design...

  17. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Special Design...

  18. Comment on "Local impermeant anions establish the neuronal chloride concentration".

    PubMed

    Voipio, Juha; Boron, Walter F; Jones, Stephen W; Hopfer, Ulrich; Payne, John A; Kaila, Kai

    2014-09-01

    Glykys et al. (Reports, 7 February 2014, p. 670) conclude that, rather than ion transporters, "local impermeant anions establish the neuronal chloride concentration" and thereby determine "the magnitude and direction of GABAAR currents at individual synapses." If this were possible, perpetual ion-motion machines could be constructed. The authors' conclusions conflict with basic thermodynamic principles.

  19. Photonic crystal fiber based chloride chemical sensors for corrosion monitoring

    NASA Astrophysics Data System (ADS)

    Wei, Heming; Tao, Chuanyi; Krishnaswamy, Sridhar

    2016-04-01

    Corrosion of steel is one of the most important durability issues in reinforced concrete (RC) structures because aggressive ions such as chloride ions permeate concrete and corrode steel, consequently accelerating the destruction of structures, especially in marine environments. There are many practical methods for corrosion monitoring in RC structures, mostly focusing on electrochemical-based sensors for monitoring the chloride ion which is thought as one of the most important factors resulting in steel corrosion. In this work, we report a fiber-optic chloride chemical sensor based on long period gratings inscribed in a photonic crystal fiber (PCF) with a chloride sensitive thin film. Numerical simulation is performed to determine the characteristics and resonance spectral response versus the refractive indices of the analyte solution flowing through into the holes in the PCF. The effective refractive index of the cladding mode of the LPGs changes with variations of the analyte solution concentration, resulting in a shift of the resonance wavelength, hence providing the sensor signal. This fiber-optic chemical sensor has a fast response, is easy to prepare and is not susceptible to electromagnetic environment, and can therefore be of use for structural health monitoring of RC structures subjected to such aggressive environments.

  20. REMOVAL OF CHLORIDE FROM ACIDIC SOLUTIONS USING NO2

    SciTech Connect

    Visser, A; Robert Pierce, R; James Laurinat, J

    2006-08-22

    Chloride (Cl{sup -}) salt processing in strong acids is used to recycle plutonium (Pu) from pyrochemical residues. The Savannah River National Laboratory (SRNL) is studying the potential application of nitrogen dioxide (NO{sub 2}) gas to effectively convert dissolved pyrochemical salt solutions to chloride-free solutions and improve recovery operations. An NO{sub 2} sparge has been shown to effectively remove Cl{sup -} from solutions containing 6-8 M acid (H{sup +}) and up to 5 M Cl{sup -}. Chloride removal occurs as a result of the competition of at least two reactions, one which is acid-dependent. Below 4 M H+, NO2 reacts with Cl- to produce nitrosyl chloride (ClNO). Between 6 M and 8 M H{sup +}, the reaction of hydrochloric acid (HCl) with nitric acid (HNO{sub 3}), facilitated by the presence of NO{sub 2}, strongly affects the rate of Cl{sup -} removal. The effect of heating the acidic Cl{sup -} salt solution without pre-heating the NO{sub 2} gas has minimal effect on Cl{sup -} removal rates when the contact times between NO{sub 2} and the salt solution are on the order of seconds.

  1. 21 CFR 862.1170 - Chloride test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  2. 21 CFR 862.1170 - Chloride test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  3. 21 CFR 862.1170 - Chloride test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  4. 21 CFR 862.1170 - Chloride test system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  5. 21 CFR 862.1170 - Chloride test system.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  6. Calcium phosphate stabilization of fly ash with chloride extraction.

    PubMed

    Nzihou, Ange; Sharrock, Patrick

    2002-01-01

    Municipal solid waste incinerator by products include fly ash and air pollution control residues. In order to transform these incinerator wastes into reusable mineral species, soluble alkali chlorides must be separated and toxic trace elements must be stabilized in insoluble form. We show that alkali chlorides can be extracted efficiently in an aqueous extraction step combining a calcium phosphate gel precipitation. In such a process, sodium and potassium chlorides are obtained free from calcium salts, and the trace metal ions are immobilized in the calcium phosphate matrix. Moderate calcination of the chemically treated fly ash leads to the formation of cristalline hydroxylapatite. Fly ash spiked with copper ions and treated by this process shows improved stability of metal ions. Leaching tests with water or EDTA reveal a significant drop in metal ion dissolution. Hydroxylapatite may trap toxic metals and also prevent their evaporation during thermal treatments. Incinerator fly ash together with air pollution control residues, treated by the combined chloride extraction and hydroxylapatite formation process may be considered safe to use as a mineral filler in value added products such as road base or cement blocks.

  7. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Food...

  8. Low-melting imidazolium-based salts with the paramagnetic reineckate-analogue anion [Cr(NCS)4(bipy)]- (bipy = 2,2'-bipyridine): syntheses, properties, and structures.

    PubMed

    Peppel, Tim; Thiele, Philipp; Tang, Mei-Bo; Zhao, Jing-Tai; Köckerling, Martin

    2015-02-01

    In order to investigate the potential ionic liquid properties of Reineckate-analogue materials, four new salts, consisting of the heteroleptic [Cr(NCS)(4)(bipy)](-) complex anion and imidazolium-based cations A(+) = 1-ethyl-3-methylimidazolium, 1-n-butyl-3-methylimidazolium, pentamethylimidazolium, and 1,3-dimethyl-2,4,5-triphenylimidazolium, were investigated. Their structures were established by single-crystal X-ray diffraction. The compounds are paramagnetic with effective magnetic moments in the range of those expected by the number of unpaired spins of the chromium(III) ion. All melting points are above 100 °C, which prevents us from calling these compounds "ionic liquids". Nevertheless, they are low for salts of this constitution and may be useful for molten salt reactions. Cyclic voltammetry measurements show no reversible electron-transfer steps.

  9. The effect of C2 substitution on melting point and liquid phase dynamics of imidazolium based-ionic liquids: insights from molecular dynamics simulations

    SciTech Connect

    Zhang, Y; Maginn, EJ

    2012-01-01

    Using molecular dynamics simulations, the melting points and liquid phase dynamic properties were studied for four alkyl-imidazolium-based ionic liquids, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), 1-n-butyl-2,3-dimethylimidazolium hexafluorophosphate ([BMMIM][PF6]), 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), and 1-ethyl-2,3-dimethylimidazolium hexafluorophosphate ([EMMIM][PF6]), respectively. Experimentally it has been observed that the substitution of a methyl group for a hydrogen at the C2 position of the cation ring leads to an increase in both the melting point and liquid phase viscosity, contrary to arguments that had been made regarding associations between the ions. The melting points of the four ionic liquids were accurately predicted using simulations, as were the trends in viscosity. The simulation results show that the origin of the effect is mainly entropic, although enthalpy also plays an important role.

  10. Barium borohydride chlorides: synthesis, crystal structures and thermal properties.

    PubMed

    Grube, Elisabeth; Olesen, Cathrine H; Ravnsbæk, Dorthe B; Jensen, Torben R

    2016-05-10

    Here we report the synthesis, mechanism of formation, characterization and thermal decomposition of new barium borohydride chlorides prepared by mechanochemistry and thermal treatment of MBH4-BaCl2, M = Li, Na or K in ratios 1 : 1 and 1 : 2. Initially, orthorhombic barium chloride, o-BaCl2 transforms into o-Ba(BH4)xCl2-x, x ∼ 0.15. Excess LiBH4 leads to continued anion substitution and a phase transformation into hexagonal barium borohydride chloride h-Ba(BH4)xCl2-x, which accommodates higher amounts of borohydride, possibly x ∼ 0.85 and resembles h-BaCl2. Thus, two solid solutions are in equilibrium during mechano-chemical treatment of LiBH4-BaCl2 (1 : 1) whereas LiBH4-BaCl2 (2 : 1) converts to h-Ba(BH4)0.85Cl1.15. Upon thermal treatment at T > ∼200 °C, h-Ba(BH4)0.85Cl1.15 transforms into another orthorhombic barium borohydride chloride compound, o-Ba(BH4)0.85Cl1.15, which is structurally similar to o-BaBr2. The samples with M = Na and K have lower reactivity and form o-Ba(BH4)xCl2-x, x ∼ 0.1 and a solid solution of sodium chloride dissolved in solid sodium borohydride, Na(BH4)1-xClx, x = 0.07. The new compounds and reaction mechanisms are investigated by in situ synchrotron radiation powder X-ray diffraction (SR-PXD), Fourier transform infrared spectroscopy (FT-IR) and simultaneous thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), mass spectroscopy (MS) and temperature programmed photographic analysis (TPPA).

  11. [Effect of sodium chloride on elasticity of silicone matrices].

    PubMed

    Snejdrová, E; Zelenka, J; Rehula, M

    2002-09-01

    An increase in the availability of the active ingredient from silicone matrices can be achieved by using sodium chloride as the filler. An addition of sodium chloride also influences the mechanical properties of silicone systems. The temperature dependence of real Young's model E' of addition silicone systems with sodium chloride was measured. With increasing NaCl concentration in the silicone system, the values of Young's module E are increased. The increase is also influenced by the particle size of NaCl. The values of the module are moderately increased also with increasing temperature, which corresponds to the kinetic theory of caoutchouc elasticity. A significant increase in E takes place at NaCl concentrations higher than 20%. With a 50% NaCl content in the system, E is increased approximately 3.5 times in comparison with an unfilled sample. Various theories of elastic behaviour of composites can be employed for the description of the effect of the filler on the mechanical properties of silicone systems under small deformations. The effect of chloride is best described by the relation proposed by Nielsen. The value of the constant A in Nielsen's relation, dependent on the shape of the filler particles and Poisson's constant of the unfilled matrix, decreases with increasing particle size. With a change in particle size, a certain change in particle shape takes place. Hydrodynamic theory provides good results for sodium chloride particle size of 102.5 microns, but for particle sizes of 20 microns and 60 microns it is less successful than Nielsen's relation.

  12. A Stable, Commercially Available Sulfenyl Chloride for the Activation of Thioglycosides in Conjunction with Silver Trifluoromethanesulfonate

    PubMed Central

    Crich, David; Cai, Feng; Yang, Fan

    2008-01-01

    p-Nitrobenzenesulfenyl chloride is a stable commercially available sulfenyl chloride that, in conjunction with silver triflate, cleanly activates a wide range of thioglycosides for glycosylation at −78 °C in CH2Cl2. PMID:18374318

  13. Cutaneous haemangioendothelioma: a possible link with chronic exposure to vinyl chloride.

    PubMed

    Davies, M F; Curtis, M; Howat, J M

    1990-01-01

    A patient who worked with polyvinyl chloride developed a malignant haemangioendothelioma of a toe. This rare tumour is more commonly found in the liver where it has been reported to arise in association with exposure to the vinyl chloride monomer.

  14. Pore size distribution of OPC and SRPC mortars in presence of chlorides

    SciTech Connect

    Suryavanshi, A.K.; Scantlebury, J.D.; Lyon, S.B.

    1995-07-01

    The pore structure of chloride-free ordinary portland cement (OPC) and sulphate resistant portland cement (SRPC) mortars are compared with the corresponding mortars with NaCl and CaCl{sub 2} added during mixing. In both OPC and SRPC mortars the addition of chlorides reduced the total accessible pore volumes compared to the corresponding chloride-free mortars. Also, in the presence of chlorides, the number of coarse pores were increased. These changes in the pore structure are believed to be due to dense calcium silicate hydrate (C-S-H) gel morphology formed in the presence of chlorides. The SRPC showed greater changes in pore structures than the OPC with equivalent amounts of chlorides added. This may be due to the lower chloride binding capacity of the SRPC and hence the higher availability of free chlorides to modify the gel morphology.

  15. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... formation and purification: The concentration of vinyl chloride in each exhaust gas stream from any equipment used in vinyl chloride formation and/or purification is not to exceed 10 ppm (average for...

  16. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... formation and purification: The concentration of vinyl chloride in each exhaust gas stream from any equipment used in vinyl chloride formation and/or purification is not to exceed 10 ppm (average for...

  17. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... formation and purification: The concentration of vinyl chloride in each exhaust gas stream from any equipment used in vinyl chloride formation and/or purification is not to exceed 10 ppm (average for...

  18. Mortality experience of workers exposed to vinyl chloride monomer in the manufacture of polyvinyl chloride in Great Britain.

    PubMed

    Fox, A J; Collier, P F

    1977-02-01

    Identification particulars were obtained for over 7000 men who were at some time between 1940 and 1974 exposed to vinyl chloride monomer in the manufacture of polyvinyl chloride. Approximately 99% of these men have been traced and their mortality experience studied. The overall standardised mortality ratio, 75-4, shows a significant reduction compared with the national rates. Four cases of liver cancer were found. Two of these have been confirmed by a panel of liver pathologists as angiosarcoma and two as not angiosarcoma. There is no evidence to support the hypothesis that cancers other than those of the liver are associated with exposure to vinyl chloride monomer. The two cases of angiosarcoma were found in men who had been exposed to high concentrations of the monomer although the second man died only eight years after first exposure. The industry in Great Britain has expanded considerably since the second world war with over 50% of men having entered with the last decade. Conclusions drawn about the effect of vinyl chloride monomer on the mortality experience of men in this industry must consequently be tempered by the reservation that the full impact may not yet be in evidence.

  19. Fate of sputum samples transported in bottles containing cetylpyridinium chloride and sodium chloride: a national reference laboratory study.

    PubMed

    Visalakshi, Potharaju; Meharwal, Sandeep K; Arora, Jyoti; Bhalla, Manpreet; Singh, Niti; Myneedu, Vithal Prasad; Behera, Digamber

    2012-04-01

    The transportation of sputum samples may sometimes take more than one week which results in an increased contamination rate and loss of positive cultures. The current study was planned to analyze the recovery rate of mycobacteria from transported samples with and without Cetylpyridinium chloride (CPC). Addition of CPC is useful for isolation of M. tuberculosis from sputum subjected to long-term storage.

  20. 21 CFR 700.14 - Use of vinyl chloride as an ingredient, including propellant of cosmetic aerosol products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... inhalation exposure to vinyl chloride. Furthermore, vinyl chloride has recently been linked to liver disease, including liver cancer, in workers engaged in the polymerization of vinyl chloride. It is the view of...

  1. 40 CFR 415.500 - Applicability; description of the potassium chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... potassium chloride production subcategory. 415.500 Section 415.500 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Chloride Production Subcategory § 415.500 Applicability; description of the potassium chloride production subcategory. The provisions of this subpart are applicable to...

  2. 40 CFR 415.500 - Applicability; description of the potassium chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... potassium chloride production subcategory. 415.500 Section 415.500 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Chloride Production Subcategory § 415.500 Applicability; description of the potassium chloride production subcategory. The provisions of this subpart are applicable to...

  3. 40 CFR 415.500 - Applicability; description of the potassium chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... potassium chloride production subcategory. 415.500 Section 415.500 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Chloride Production Subcategory § 415.500 Applicability; description of the potassium chloride production subcategory. The provisions of this subpart are applicable to...

  4. 40 CFR 415.500 - Applicability; description of the potassium chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... potassium chloride production subcategory. 415.500 Section 415.500 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Chloride Production Subcategory § 415.500 Applicability; description of the potassium chloride production subcategory. The provisions of this subpart are applicable to...

  5. 40 CFR 415.10 - Applicability; description of the aluminum chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... aluminum chloride production subcategory. 415.10 Section 415.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Chloride Production Subcategory § 415.10 Applicability; description of the aluminum chloride production subcategory. The provisions of this subpart are applicable to discharges...

  6. 40 CFR 415.10 - Applicability; description of the aluminum chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... aluminum chloride production subcategory. 415.10 Section 415.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Chloride Production Subcategory § 415.10 Applicability; description of the aluminum chloride production subcategory. The provisions of this subpart are applicable to discharges...

  7. 40 CFR 415.10 - Applicability; description of the aluminum chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... aluminum chloride production subcategory. 415.10 Section 415.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Chloride Production Subcategory § 415.10 Applicability; description of the aluminum chloride production subcategory. The provisions of this subpart are applicable to discharges...

  8. 40 CFR 415.10 - Applicability; description of the aluminum chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... aluminum chloride production subcategory. 415.10 Section 415.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Chloride Production Subcategory § 415.10 Applicability; description of the aluminum chloride production subcategory. The provisions of this subpart are applicable to discharges...

  9. 40 CFR 415.10 - Applicability; description of the aluminum chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... aluminum chloride production subcategory. 415.10 Section 415.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Chloride Production Subcategory § 415.10 Applicability; description of the aluminum chloride production subcategory. The provisions of this subpart are applicable to discharges...

  10. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  11. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  12. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  13. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  14. Calcium-dependent chloride current in rat cerebellar Purkinje cell membranes.

    PubMed

    Vykhareva, E A; Zamoyski, V L; Grigoriev, V V; Bachurin, S O

    2015-01-01

    The presence of calcium-dependent potential-activated chloride currents in the membranes of freshly isolated rat cerebellar Purkinje cells (12-15 days) was shown by the whole-cell patch clamp technique. Chloride currents appeared in a sodium-free external solution and reversibly disappeared in the absence of external chloride and calcium ions.

  15. 40 CFR 721.10479 - Quaternary ammonium compounds, tris(hydrogenated tallow alkyl)methyl, chlorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...(hydrogenated tallow alkyl)methyl, chlorides. 721.10479 Section 721.10479 Protection of Environment..., tris(hydrogenated tallow alkyl)methyl, chlorides. (a) Chemical substance and significant new uses...(hydrogenated tallow alkyl)methyl, chlorides (PMN P-04-335; CAS No. 308074-73-9) is subject to reporting...

  16. 40 CFR 721.10479 - Quaternary ammonium compounds, tris(hydrogenated tallow alkyl)methyl, chlorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...(hydrogenated tallow alkyl)methyl, chlorides. 721.10479 Section 721.10479 Protection of Environment..., tris(hydrogenated tallow alkyl)methyl, chlorides. (a) Chemical substance and significant new uses...(hydrogenated tallow alkyl)methyl, chlorides (PMN P-04-335; CAS No. 308074-73-9) is subject to reporting...

  17. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... resulting from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of...

  18. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... resulting from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of...

  19. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... resulting from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of...

  20. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... resulting from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of...

  1. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... resulting from the production of ammonium chloride by the reaction of anhydrous ammonia with hydrogen... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of...

  2. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  3. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  4. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  5. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  6. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  7. Determination of Vinyl Chloride at ug/l. Level in Water by Gas Chromatography

    ERIC Educational Resources Information Center

    Bellar, Thomas A.; And Others

    1976-01-01

    A quantitative method for the determination of vinyl chloride in water is presented. Vinyl chloride is transfered to the gas phase by bubbling inert gas through the water. After concentration on silica gel or Carbosieve-B, determination is by gas chromatography. Confirmation of vinyl chloride is by gas chromatography-mass spectrometry. (Author/BT)

  8. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the calcium chloride production subcategory. The provisions of this subpart are applicable to...

  9. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the calcium chloride production subcategory. The provisions of this subpart are applicable to...

  10. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the calcium chloride production subcategory. The provisions of this subpart are applicable to...

  11. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the calcium chloride production subcategory. The provisions of this subpart are applicable to...

  12. 40 CFR 415.40 - Applicability; description of the calcium chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... calcium chloride production subcategory. 415.40 Section 415.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Calcium Chloride Production Subcategory § 415.40 Applicability; description of the calcium chloride production subcategory. The provisions of this subpart are applicable to...

  13. 40 CFR 415.500 - Applicability; description of the potassium chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... potassium chloride production subcategory. 415.500 Section 415.500 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Potassium Chloride Production Subcategory § 415.500 Applicability; description of the potassium chloride production subcategory. The provisions of this subpart are applicable to...

  14. 40 CFR 415.160 - Applicability; description of the sodium chloride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sodium chloride production subcategory. 415.160 Section 415.160 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Chloride Production Subcategory § 415.160 Applicability; description of the sodium... the production of sodium chloride by the solution brine-mining process and by the solar...

  15. 40 CFR 415.160 - Applicability; description of the sodium chloride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sodium chloride production subcategory. 415.160 Section 415.160 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Chloride Production Subcategory § 415.160 Applicability; description of the sodium... the production of sodium chloride by the solution brine-mining process and by the solar...

  16. 40 CFR 415.160 - Applicability; description of the sodium chloride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... sodium chloride production subcategory. 415.160 Section 415.160 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Chloride Production Subcategory § 415.160 Applicability; description of the sodium... the production of sodium chloride by the solution brine-mining process and by the solar...

  17. 40 CFR 415.160 - Applicability; description of the sodium chloride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sodium chloride production subcategory. 415.160 Section 415.160 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Chloride Production Subcategory § 415.160 Applicability; description of the sodium... the production of sodium chloride by the solution brine-mining process and by the solar...

  18. 40 CFR 415.160 - Applicability; description of the sodium chloride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... sodium chloride production subcategory. 415.160 Section 415.160 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Chloride Production Subcategory § 415.160 Applicability; description of the sodium... the production of sodium chloride by the solution brine-mining process and by the solar...

  19. Copper-catalyzed conversion of aryl and heteroaryl bromides into the corresponding chlorides.

    PubMed

    Feng, Xiujuan; Qu, Yiping; Han, Yanlei; Yu, Xiaoqiang; Bao, Ming; Yamamoto, Yoshinori

    2012-10-01

    An efficient method for the synthesis of aryl and heteroaryl chlorides is described. The reactions of aryl and heteroaryl bromides with tetramethylammonium chloride proceeded smoothly in the presence of a copper catalyst under mild reaction conditions to produce the corresponding chlorides in satisfactory to excellent yields. PMID:22895409

  20. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Calcium pantothenate, calcium chloride double salt... Dietary and Nutritional Additives § 172.330 Calcium pantothenate, calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may be safely used in foods for...