Science.gov

Sample records for 10-20 watt unit

  1. Remedial investigation/feasibility study report for Lower Watts Bar Reservoir Operable Unit

    SciTech Connect

    1995-03-01

    This document is the combined Remedial Investigation and Feasibility Study Report for the lower Watts Bar Reservoir (LWBR) Operable Unit (OU). The LWBR is located in Roane, Rhea, and Meigs counties, Tennessee, and consists of Watts Bar Reservoir downstream of the Clinch river. This area has received hazardous substances released over a period of 50 years from the US Department of Energy`s Oak Ridge Reservation (ORR), a National Priority List site established under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). As required by this law, the ORR and all off-site areas that have received contaminants, including LWBR, must be investigated to determine the risk to human health and the environment resulting from these releases, the need for any remedial action to reduce these risks, and the remedial actions that are most feasible for implementation in this OU. Contaminants from the ORR are primarily transported to the LWBR via the Clinch River. There is little data regarding the quantities of most contaminants potentially released from the ORR to the Clinch River, particularly for the early years of ORR operations. Estimates of the quantities released during this period are available for most radionuclides and some inorganic contaminants, indicating that releases 30 to 50 years ago were much higher than today. Since the early 1970s, the release of potential contaminants has been monitored for compliance with environmental law and reported in the annual environmental monitoring reports for the ORR.

  2. Watts Bar Unit 1 Cycle Zero Power Physics Tests Analysis with VERA-CS

    SciTech Connect

    Gehin, Jess C; Godfrey, Andrew T; Evans, Thomas M; Hamilton, Steven P; Francheschini, F.

    2014-01-01

    The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications, including a core simulation capability called VERA-CS. A key milestone for this endeavor is to validate VERA against measurements from operating nuclear power reactors. The first step in validation against plant data is to determine the ability of VERA to accurately simulate the initial startup physics tests for Watts Bar Nuclear Power Station, Unit 1 (WBN1) cycle 1. VERA-CS calculations were performed with the Insilico code developed at ORNL using cross section processing from the SCALE system and the transport capabilities within the Denovo transport code using the SPN method. The calculations were performed with ENDF/B-VII.0 cross sections in 252 groups (collapsed to 23 groups for the 3D transport solution). The key results of the comparison of calculations with measurements include initial criticality, control rod worth critical configurations, control rod worth, differential boron worth, and isothermal temperature reactivity coefficient (ITC). The VERA results for these parameters show good agreement with measurements, with the exception of the ITC, which requires additional investigation. Results are also compared to those obtained with Monte Carlo methods and a current industry core simulator.

  3. Simulation of Watts Bar Unit 1 Initial Startup Tests with Continuous Energy Monte Carlo Methods

    SciTech Connect

    Godfrey, Andrew T; Gehin, Jess C; Bekar, Kursat B; Celik, Cihangir

    2014-01-01

    The Consortium for Advanced Simulation of Light Water Reactors* is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications. One component of the testing and validation plan for VERA is comparison of neutronics results to a set of continuous energy Monte Carlo solutions for a range of pressurized water reactor geometries using the SCALE component KENO-VI developed by Oak Ridge National Laboratory. Recent improvements in data, methods, and parallelism have enabled KENO, previously utilized predominately as a criticality safety code, to demonstrate excellent capability and performance for reactor physics applications. The highly detailed and rigorous KENO solutions provide a reliable nu-meric reference for VERAneutronics and also demonstrate the most accurate predictions achievable by modeling and simulations tools for comparison to operating plant data. This paper demonstrates the performance of KENO-VI for the Watts Bar Unit 1 Cycle 1 zero power physics tests, including reactor criticality, control rod worths, and isothermal temperature coefficients.

  4. Assessment of Pellet-Clad Interaction Indicators in Watts Bar Unit 1 using the VERA Framework

    SciTech Connect

    Stimpson, Shane G; Powers, Jeffrey J; Clarno, Kevin T; Pawlowski, Roger; Bratton, Ryan

    2015-01-01

    The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high-fidelity, multiphysics simulations of light water reactors (LWRs) by coupling a variety of codes within the Virtual Environment for Reactor Analysis (VERA). One of the primary goals of CASL is to predict local cladding failure through pellet-clad interaction (PCI). This capability is currently being pursued through several different approaches, such as with Tiamat, which is a simulation tool within VERA that more tightly couples the MPACT neutron transport solver, the CTF thermal hydraulics solver, and the MOOSE-based Bison-CASL fuel performance code. However, the process in this paper focuses on running fuel performance calculations with Bison-CASL to predict PCI using the multicycle output data from coupled neutron transport/thermal hydraulics simulations. In recent work within CASL, Watts Bar Unit 1 has been simulated over 12 cycles using the VERA core simulator capability based on MPACT and CTF. Using the output from these simulations, Bison-CASL results can be obtained without rerunning all 12 cycles, while providing some insight into PCI indicators. Multi-cycle Bison-CASL results are presented and compared against results from the FRAPCON fuel performance code. There are several quantities of interest in considering PCI and subsequent fuel rod failures, such as the clad hoop stress and maximum centerline fuel temperature, particularly as a function of time. Bison-CASL performs single-rod simulations using representative power and temperature distributions, providing high-resolution results for these and a number of other quantities. This will assist in identifying fuels rods as potential failure locations for use in further analyses.

  5. The Planck Constant, the International System of Units, and the 2012 North American Watt Balance Absolute Gravity Comparison

    NASA Astrophysics Data System (ADS)

    Newell, D. B.

    2012-12-01

    As outlined in Resolution 1 of the 24th Meeting of the General Conference on Weights and Measures (CGPM) on the future revision of the International System of Units (SI) [1], the current four SI base units the kilogram, the ampere, the kelvin and the mole, will be redefined in terms of invariants of nature. The new definitions will be based on fixed numerical values of the Planck constant (h), the elementary charge (e), the Boltzmann constant (k), and the Avogadro constant (NA), respectively. While significant progress has been made towards providing the necessary experimental results for the redefinition, some disagreement among the relevant data remain. Among the set of discrepant data towards the redefinition of the SI are the determinations of the Planck constant from the National Institute of Standards and Technology (NIST) watt balance [2] and the recent result from the National Research Council Canada (NRC) watt balance [3], with the discrepancy of roughly 2.5 parts in 107 being significantly outside the reported uncertainties. Of major concern is that the watt balance experiment is seen as a key component of a mise en pratique for the new kilogram definition, once such a redefinition takes place. The basic operational principle of a watt balance relates the Planck constant to mass, length, and time through h = mgvC, where m is the mass of an artifact mass standard, g is the local acceleration of gravity, v is a velocity, and C is a combination of frequencies and scalar constants. With the total uncertainty goal for the watt balance on the order of a few parts in 108, g needs to be determined at the location of the mass standard to parts in 109 such that its uncertainty is negligible in the final watt balance result. NIST and NRC have formed a collaborative effort to reconcile the relevant discrepant data and provide further progress towards preparing and testing a mise en pratique for the new kilogram definition. As an initial step, direct comparisons of

  6. The watt or Kibble balance: a technique for implementing the new SI definition of the unit of mass

    NASA Astrophysics Data System (ADS)

    Robinson, Ian A.; Schlamminger, Stephan

    2016-10-01

    The redefinition of the SI unit of mass in terms of a fixed value of the Planck constant has been made possible by the Kibble balance, previously known as the watt balance. Once the new definition has been adopted, the Kibble balance technique will permit the realisation of the mass unit over a range from milligrams to kilograms. We describe the theory underlying the Kibble balance and practical techniques required to construct such an instrument to relate a macroscopic physical mass to the Planck constant with an uncertainty, which is achievable at present, in the region of 2 parts in 108. A number of Kibble balances have either been built or are under construction and we compare the principal features of these balances.

  7. Present and future mass standards for the LNE watt balance and the future dissemination of the mass unit in France

    NASA Astrophysics Data System (ADS)

    Pinot, Patrick; Beaudoux, Florian; Bentouati, Djilali; Espel, Patrick; Madec, Tanguy; Thomas, Matthieu; Silvestri, Zaccari; Ziane, Djamel; Piquemal, François

    2016-08-01

    The value of the Planck constant h was determined in 2014 by means of the LNE watt balance experiment. The relative standard uncertainty was 31 parts in 108. This first determination was performed in air with a 500 g mass standard made from XSH Alacrite. The main uncertainty components in air associated with the mass involve the calibration, the mass stability, the buoyancy correction and the magnetic interaction correction. The combined relative uncertainty due to the mass is 7.2 parts in 108. The use in 2016 of a mass standard made from platinum iridium alloy significantly reduces the component of uncertainty arising from the mass standard for a Planck constant measurement either in air or under vacuum. The relative uncertainty due to this contribution is estimated to be about 3 parts in 108 in air and one part in 108 under vacuum. The future system for the dissemination of the mass unit using the LNE watt balance will be based on a primary realization with three 500 g mass standards made from platinum–iridium alloy, pure iridium and Udimet 720 respectively, coupled with a pool of kilograms made from different materials. Pure iridium and Udimet 720 are new materials to make reference mass standards proposed by CNAM and LNE respectively and have never been used by any NMI for manufacturing mass standards until now. Some new results concerning their surface behavior are given.

  8. Present and future mass standards for the LNE watt balance and the future dissemination of the mass unit in France

    NASA Astrophysics Data System (ADS)

    Pinot, Patrick; Beaudoux, Florian; Bentouati, Djilali; Espel, Patrick; Madec, Tanguy; Thomas, Matthieu; Silvestri, Zaccari; Ziane, Djamel; Piquemal, François

    2016-08-01

    The value of the Planck constant h was determined in 2014 by means of the LNE watt balance experiment. The relative standard uncertainty was 31 parts in 108. This first determination was performed in air with a 500 g mass standard made from XSH Alacrite. The main uncertainty components in air associated with the mass involve the calibration, the mass stability, the buoyancy correction and the magnetic interaction correction. The combined relative uncertainty due to the mass is 7.2 parts in 108. The use in 2016 of a mass standard made from platinum iridium alloy significantly reduces the component of uncertainty arising from the mass standard for a Planck constant measurement either in air or under vacuum. The relative uncertainty due to this contribution is estimated to be about 3 parts in 108 in air and one part in 108 under vacuum. The future system for the dissemination of the mass unit using the LNE watt balance will be based on a primary realization with three 500 g mass standards made from platinum-iridium alloy, pure iridium and Udimet 720 respectively, coupled with a pool of kilograms made from different materials. Pure iridium and Udimet 720 are new materials to make reference mass standards proposed by CNAM and LNE respectively and have never been used by any NMI for manufacturing mass standards until now. Some new results concerning their surface behavior are given.

  9. Watt and joule balances

    NASA Astrophysics Data System (ADS)

    Robinson, Ian A.

    2014-04-01

    The time is fast approaching when the SI unit of mass will cease to be based on a single material artefact and will instead be based upon the defined value of a fundamental constant—the Planck constant—h . This change requires that techniques exist both to determine the appropriate value to be assigned to the constant, and to measure mass in terms of the redefined unit. It is important to ensure that these techniques are accurate and reliable to allow full advantage to be taken of the stability and universality provided by the new definition and to guarantee the continuity of the world's mass measurements, which can affect the measurement of many other quantities such as energy and force. Up to now, efforts to provide the basis for such a redefinition of the kilogram were mainly concerned with resolving the discrepancies between individual implementations of the two principal techniques: the x-ray crystal density (XRCD) method [1] and the watt and joule balance methods which are the subject of this special issue. The first three papers report results from the NRC and NIST watt balance groups and the NIM joule balance group. The result from the NRC (formerly the NPL Mk II) watt balance is the first to be reported with a relative standard uncertainty below 2 × 10-8 and the NIST result has a relative standard uncertainty below 5 × 10-8. Both results are shown in figure 1 along with some previous results; the result from the NIM group is not shown on the plot but has a relative uncertainty of 8.9 × 10-6 and is consistent with all the results shown. The Consultative Committee for Mass and Related Quantities (CCM) in its meeting in 2013 produced a resolution [2] which set out the requirements for the number, type and quality of results intended to support the redefinition of the kilogram and required that there should be agreement between them. These results from NRC, NIST and the IAC may be considered to meet these requirements and are likely to be widely debated

  10. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 17

    SciTech Connect

    Tam, P.S.

    1995-10-01

    This report supplements the Safety Evaluation Report (SER), NUREG-0847 (June 1982), Supplement No. 1 (September 1982), Supplement No. 2 (January 1984), Supplement No. 3 (January 1985), Supplement No. 4 (March 1985), Supplement No. 5 (November 1990), Supplement No. 6 (April 1991), Supplement No. 7 (September 1991), 1991), Supplement No. 8 (January 1992), Supplement No. 9 (June 1992), Supplement No. 10 (October 1992), Supplement No. 11 (April.1993), Supplement No. 12 (October 1993), Supplement No. 13 (April 1994), Supplement No. 14 (December 1994), Supplement No. 15 (June 1995), and Supplement No. 16 (September 1995) issued by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission with respect to the application filed by the Tennessee Valley Authority, as applicant and owner, for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50--390 and 50--391). The facility is located in Rhea county, Tennessee, near the Watts Bar Dam on the Tennessee River. In this supplement, NRC examines the significant problems of construction quality and quality assurance effectiveness that led TVA to withdraw its certification in 1985 that Watts Bar Unit I was ready to load fuel. Also discussed are the extensive corrective actions performed by TVA according to its nuclear performance plans and other supplemental programs, and NRC`s extensive oversight to determine whether the Watts Bar Unit 1 construction quality and TVA`s operational readiness and quality assurance effectiveness are adequate for a low-power operating license to be issued. SSER 17 does not address Watts Bar Unit 2, except for the systems which are necessary to support Unit 1 operation.

  11. Subsea thermoelectric generators. 1- 10-watt peltier effect prototypes - a step towards autonomous electrical control units at subsea wellheads

    SciTech Connect

    Weid, J.P. von der; Silva, J.A.P. da; Gama, A.L.; Sant'Anna, A.C.

    1994-05-01

    Offshore oil production activities require the operation of underwater hydraulic or electric equipment. The high cost of acquisition and installation of umbilical cables to supply power is leading to the development of independently powered cableless equipment, connected to the surface by the transmission and reception of control signals through the water. As a first step toward these autonomous wellhead control systems, the authors designed and successfully tested in laboratory conditions a thermoelectric generator able to supply at least 10 watts of electric power, extracting it from the temperature difference between the oil and the surrounding water. Hydraulic pumps and pressure accumulators, control electronics, and valve actuators for wellhead control units are all technically solved problems, even for seafloors as deep as 1,000 meters. However, an autonomous underwater wellhead control unit can only be conceived if an energy source is available at the seafloor. The development of a reliable and compact power source is indeed a fundamental step towards autonomous wet Christmas tree valve actuators.

  12. 78 FR 62709 - Tennessee Valley Authority; Watts Bar Nuclear Plant, Unit 2

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-22

    ... construction (FES-CP) of WBN, Units 1 and 2, issued on November 9, 1972 (ADAMS Accession No. ML073470580... on TVA's FES-CP as part of its review. In December 1978, the NRC staff issued NUREG-0498, ``Final.... ML082540803) for the operating-license stage (FES-OL), which addressed environmental impacts of...

  13. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391): Supplement No. 19

    SciTech Connect

    1995-11-01

    Supplement No. 19 to the Safety Evaluation Report for the application filed by the Tennessee Valley Authority for license to operate Watts Bar Nuclear Plant, Units 1 and 2, Docket Nos. 50-390 and 50-391, located in Rhea County Tennessee, has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. The purpose of this supplement is to update the Safety Evaluation with (1) additional information submitted by the applicant since Supplement No. 18 was issued, and (2) matters that the staff had under review when Supplement No. 18 was issued.

  14. Safety Evaluation Report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 12

    SciTech Connect

    Tam, P.S.

    1993-10-01

    Supplement No. 12 to the Safety Evaluation Report for the application filed by the Tennessee Valley Authority for license to operate Watts Bar Nuclear Plant, Units 1 and 2, Docket Nos. 50-390 and 50-391, located in Rhea County, Tennessee, has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. The purpose of this supplement is to update the Safety Evaluation of (1) additional information submitted by the applicant since Supplement No. 11 was issued, and (2) matters that the staff had under review when Supplement No. 11 was issued.

  15. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 15

    SciTech Connect

    Tam, P.S.

    1995-06-01

    This report supplements the Safety Evaluation Report (SER), NUREG-0847 (June 1982), Supplement No. 1 (September 1982), Supplement No. 2 (January 1984), Supplement No. 3 (January 1985), Supplement No. 4 (March 1985), Supplement No. 5 (November 1990), Supplement No. 6 (April 1991), Supplement No. 7 (September 1991), Supplement No. 8 (January 1992), Supplement No. 9 (June 1992), Supplement No. 10 (October 1992), Supplement No. 11 (April 1993), Supplement No. 12 (October 1993), Supplement No. 13 (April 1994), and Supplement No. 14 (December 1994) issued by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission with respect to the application filed by the Tennessee Valley Authority, as applicant and owner, for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). The facility is located in Rhea County, Tennessee, near the Watts Bar Dam on the Tennessee River. This supplement provides recent information regarding resolution of some of the outstanding and confirmatory items, and proposed license conditions identified in the SER.

  16. Watt and joule balances

    NASA Astrophysics Data System (ADS)

    Robinson, Ian A.

    2014-04-01

    The time is fast approaching when the SI unit of mass will cease to be based on a single material artefact and will instead be based upon the defined value of a fundamental constant—the Planck constant—h . This change requires that techniques exist both to determine the appropriate value to be assigned to the constant, and to measure mass in terms of the redefined unit. It is important to ensure that these techniques are accurate and reliable to allow full advantage to be taken of the stability and universality provided by the new definition and to guarantee the continuity of the world's mass measurements, which can affect the measurement of many other quantities such as energy and force. Up to now, efforts to provide the basis for such a redefinition of the kilogram were mainly concerned with resolving the discrepancies between individual implementations of the two principal techniques: the x-ray crystal density (XRCD) method [1] and the watt and joule balance methods which are the subject of this special issue. The first three papers report results from the NRC and NIST watt balance groups and the NIM joule balance group. The result from the NRC (formerly the NPL Mk II) watt balance is the first to be reported with a relative standard uncertainty below 2 × 10-8 and the NIST result has a relative standard uncertainty below 5 × 10-8. Both results are shown in figure 1 along with some previous results; the result from the NIM group is not shown on the plot but has a relative uncertainty of 8.9 × 10-6 and is consistent with all the results shown. The Consultative Committee for Mass and Related Quantities (CCM) in its meeting in 2013 produced a resolution [2] which set out the requirements for the number, type and quality of results intended to support the redefinition of the kilogram and required that there should be agreement between them. These results from NRC, NIST and the IAC may be considered to meet these requirements and are likely to be widely debated

  17. Safety evaluation report related to the operation of Watts Bar Nuclear Plant, Units 1 and 2 (Docket Nos. 50-390 and 50-391). Supplement No. 18

    SciTech Connect

    Tam, P.S.

    1995-10-01

    In June 1982, the Nuclear Regulatory Commission staff (NRC staff or staff) issued a Safety Evaluation Report, NUREG-0847, regarding the application by the Tennessee Valley Authority (TVA or the applicant) for licenses to operate the Watts Bar Nuclear Plant, Units 1 and 2. Each of the following sections and appendices of this supplement is numbered the same as the section or appendix of the SER that is being updated, and the discussions are supplementary to, and not in lieu of, the discussion in the SER, unless otherwise noted. Accordingly, Appendix A continues the chronology of the safety review. Appendix E lists principal contributors to this supplement. Appendix FF is added in this supplement. The other appendices are not changed by this supplement.

  18. Reproduction of a unit of power of the laser radiation in compliance with the redefinition of the optical watt

    NASA Astrophysics Data System (ADS)

    Owsik, Jan; Liberman, Anatoly A.; Kovalev, Anatoly A.; Moskalyuk, Sergey A.; Rembielinska, Anna

    2012-03-01

    The fast development of laser technology requires creating a specialistic resource base for laser production certification together with radiant power (energy) measuring devices [1, 2]. This need becomes of special importance at the time when commencement of laser production at quantum points, holes and wires, whose dynamic scope of power and energy starts from counting individual photons up to tens of kilowatts (kilojoules), and the spectrum from ultraviolet to a near infrared [3]. Such are the characteristics of currently accessible laser radiation sources, used both for laser position finding and in other spheres of laser construction. Scattered radiation receivers, which are used in conditions of registering extremely low levels of radiant power, require examining of their metrological characteristics in order to define the value of their uncertainty. Elaborating such a laser set will constitute a basis for further improvement of a system for securing uniformity of measurements of basic energy parameters, characteristic for laser radiation. A set of standards now under elaboration will allow for the certification of all kinds of lasers. Choosing the optimum scheme for the elaboration of a new standard would enable the creation of a standard encompassing: a complete relation to ISO 11554- 2008 norms; with high accuracy of reproducibility of the volume of power unit (relative expanded uncertainty ~0,02%) and transmitting its volume; with an expanded power range P=1,0•10-2÷2,0[W] and with an expanded spectrum range λ=0,3÷10,6[μm] with repeatability of measurements' results.

  19. Fractional Watt AMTEC Converter

    NASA Astrophysics Data System (ADS)

    Hunt, T. K.; Rasmussen, J. R.

    2006-01-01

    We report here the long term performance of a small, multi-tube AMTEC converter. This converter was designed to operate and produce approximately 12 watt of electrical output from a small, 4 to 6 watt radioisotope heat source for remote power applications. It was built and put on test in 1999 using electrical heaters as stand-ins for the radioisotope capsule. Since that time it has accumulated more than 5 years of run time at an input heater temperature of 700 °C, with numerous thermal cycles to ambient that were generally related to grid power failures or physical moves of the test apparatus. The power output has remained, with variations due to orientation changes and minor variations due to small temperature changes, essentially constant at 0.40 W to 0.60 W over the test period and operation is ongoing. The converter casing and mechanical structure was fabricated from 316 SS and the electrodes are sputtered titanium nitride films. Separate static tests of a multilayer insulation package suitable for use with the converter showed the capability to reach 700 °C with a thermal input of < 4 watts.

  20. Coil motion effects in watt balances: a theoretical check

    NASA Astrophysics Data System (ADS)

    Li, Shisong; Schlamminger, Stephan; Haddad, Darine; Seifert, Frank; Chao, Leon; Pratt, Jon R.

    2016-04-01

    A watt balance is a precision apparatus for the measurement of the Planck constant that has been proposed as a primary method for realizing the unit of mass in a revised International System of Units. In contrast to an ampere balance, which was historically used to realize the unit of current in terms of the kilogram, the watt balance relates electrical and mechanical units through a virtual power measurement and has far greater precision. However, because the virtual power measurement requires the execution of a prescribed motion of a coil in a fixed magnetic field, systematic errors introduced by horizontal and rotational deviations of the coil from its prescribed path will compromise the accuracy. We model these potential errors using an analysis that accounts for the fringing field in the magnet, creating a framework for assessing the impact of this class of errors on the uncertainty of watt balance results.

  1. 31 CFR 10.20 - Information to be furnished.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance: Treasury 1 2014-07-01 2014-07-01 false Information to be furnished. 10.20 Section 10.20 Money and Finance: Treasury Office of the Secretary of the Treasury PRACTICE BEFORE THE... § 10.20 Information to be furnished. (a) To the Internal Revenue Service. (1) A practitioner must, on...

  2. 31 CFR 10.20 - Information to be furnished.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance: Treasury 1 2013-07-01 2013-07-01 false Information to be furnished. 10.20 Section 10.20 Money and Finance: Treasury Office of the Secretary of the Treasury PRACTICE BEFORE THE... § 10.20 Information to be furnished. (a) To the Internal Revenue Service. (1) A practitioner must, on...

  3. 31 CFR 10.20 - Information to be furnished.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Information to be furnished. 10.20 Section 10.20 Money and Finance: Treasury Office of the Secretary of the Treasury PRACTICE BEFORE THE... § 10.20 Information to be furnished. (a) To the Internal Revenue Service. (1) A practitioner must, on...

  4. 31 CFR 10.20 - Information to be furnished.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance: Treasury 1 2012-07-01 2012-07-01 false Information to be furnished. 10.20 Section 10.20 Money and Finance: Treasury Office of the Secretary of the Treasury PRACTICE BEFORE THE... § 10.20 Information to be furnished. (a) To the Internal Revenue Service. (1) A practitioner must, on...

  5. 10 CFR 10.20 - Purpose of the procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Purpose of the procedures. 10.20 Section 10.20 Energy NUCLEAR REGULATORY COMMISSION CRITERIA AND PROCEDURES FOR DETERMINING ELIGIBILITY FOR ACCESS TO RESTRICTED DATA OR NATIONAL SECURITY INFORMATION OR AN EMPLOYMENT CLEARANCE Procedures § 10.20 Purpose of...

  6. A Simple Watt Balance for the Absolute Determination of Mass

    ERIC Educational Resources Information Center

    Quinn, Terry; Quinn, Lucas; Davis, Richard

    2013-01-01

    A watt balance is an electromechanical device that allows a mass to be determined in terms of measurable electrical and mechanical quantities, themselves traceable to the fundamental constants of physics. International plans are well advanced to redefine the unit of mass, the kilogram, in terms of a fixed numerical value for the Planck constant. A…

  7. Small Stirling dynamic isotope power system for multihundred-watt robotic missions

    NASA Technical Reports Server (NTRS)

    Bents, David J.

    1991-01-01

    Free Piston Stirling Engine (FPSE) and linear alternator (LA) technology is combined with radioisotope heat sources to produce a compact dynamic isotope power system (DIPS) suitable for multihundred watt space application which appears competitive with advance radioisotope thermoelectric generators (RTGs). The small Stirling DIPS is scalable to multihundred watt power levels or lower. The FPSE/LA is a high efficiency convertor in sizes ranging from tens of kilowatts down to only a few watts. At multihundred watt unit size, the FPSE can be directly integrated with the General Purpose Heat Source (GPHS) via radiative coupling; the resulting dynamic isotope power system has a size and weight that compares favorably with the advanced modular (Mod) RTG, but requires less than a third the amount of isotope fuel. Thus the FPSE extends the high efficiency advantage of dynamic systems into a power range never previously considered competitive for DIPS. This results in lower fuel cost and reduced radiological hazard per delivered electrical watt.

  8. Small Stirling dynamic isotope power system for multihundred-watt robotic missions

    NASA Technical Reports Server (NTRS)

    Bents, David J.

    1991-01-01

    Free piston Stirling Engine (FPSE) and linear alternator (LA) technology is combined with radioisotope heat sources to produce a compact dynamic isotope power system (DIPS) suitable for multihundred watt space application which appears competitive with advanced radioisotope thermoelectric generators (RTGs). The small Stirling DIPS is scalable to multihundred watt power levels or lower. The FPSE/LA is a high efficiency convertor in sizes ranging from tens of kilowatts down to only a few watts. At multihundred watt unit size, the FPSE can be directly integrated with the General Purpose Heat Source (GPHS) via radiative coupling; the resulting dynamic isotope power system has a size and weight that compares favorably with the advanced modular (Mod) RTG, but requires less than a third the amount of isotope fuel. Thus the FPSE extends the high efficiency advantage of dynamic systems into a power range never previously considered competitive for DIPS. This results in lower fuel cost and reduced radiological hazard per delivered electrical watt.

  9. Small Stirling dynamic isotope power system for multihundred-watt robotic missions

    NASA Astrophysics Data System (ADS)

    Bents, David J.

    Free Piston Stirling Engine (FPSE) and linear alternator (LA) technology is combined with radioisotope heat sources to produce a compact dynamic isotope power system (DIPS) suitable for multihundred watt space application which appears competitive with advance radioisotope thermoelectric generators (RTGs). The small Stirling DIPS is scalable to multihundred watt power levels or lower. The FPSE/LA is a high efficiency convertor in sizes ranging from tens of kilowatts down to only a few watts. At multihundred watt unit size, the FPSE can be directly integrated with the General Purpose Heat Source (GPHS) via radiative coupling; the resulting dynamic isotope power system has a size and weight that compares favorably with the advanced modular (Mod) RTG, but requires less than a third the amount of isotope fuel. Thus the FPSE extends the high efficiency advantage of dynamic systems into a power range never previously considered competitive for DIPS. This results in lower fuel cost and reduced radiological hazard per delivered electrical watt.

  10. Small stirling dynamic isotope power systems for multihundred-watt robotic missions

    SciTech Connect

    Bents, D.J.

    1991-01-01

    Free piston Stirling Engine (FPSE) and linear alternator (LA) technology is combined with radioisotope heat sources to produce a compact dynamic isotope power system (DIPS) suitable for multihundred watt space application which appears competitive with advanced radioisotope thermoelectric generators (RTGs). The small Stirling DIPS is scalable to multihundred watt power levels or lower. The FPSE/LA is a high efficiency convertor in sizes ranging from tens of kilowatts down to only a few watts. At multihundred watt unit size, the FPSE can be directly integrated with the General Purpose Heat Source (GPHS) via radiative coupling; the resulting dynamic isotope power system has a size and weight that compares favorably with the advanced modular (Mod) RTG, but requires less than a third the amount of isotope fuel. Thus the FPSE extends the high efficiency advantage of dynamic systems into a power range never previously considered competitive for DIPS. This results in lower fuel cost and reduced radiological hazard per delivered electrical watt.

  11. 31 CFR 10.20 - Information to be furnished.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false Information to be furnished. 10.20... § 10.20 Information to be furnished. Link to an amendment published at 76 FR 32307, June 3, 2011. (a... to be furnished. (a) * * * (3) When a proper and lawful request is made by a duly authorized...

  12. General Music 10-20-30. Guide to Implementation.

    ERIC Educational Resources Information Center

    Crawford, Lorraine, Ed.

    In Canada's province of Alberta, senior high school General Music 10-20-30 is a sequence of courses for students who are interested in a broad spectrum of musical experiences within a nonperformance-based environment but not interested in specializing in choral or instrumental performance. General Music 10, 20, and 30 courses are offered for 3 or…

  13. 33 CFR 67.10-20 - Sound signal tests.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Sound signal tests. 67.10-20... NAVIGATION AIDS TO NAVIGATION ON ARTIFICIAL ISLANDS AND FIXED STRUCTURES General Requirements for Sound signals § 67.10-20 Sound signal tests. (a) Sound signal tests must: (1) Be made by the applicant in...

  14. 33 CFR 67.10-20 - Sound signal tests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Sound signal tests. 67.10-20... NAVIGATION AIDS TO NAVIGATION ON ARTIFICIAL ISLANDS AND FIXED STRUCTURES General Requirements for Sound signals § 67.10-20 Sound signal tests. (a) Sound signal tests must: (1) Be made by the applicant in...

  15. 33 CFR 67.10-20 - Sound signal tests.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Sound signal tests. 67.10-20... NAVIGATION AIDS TO NAVIGATION ON ARTIFICIAL ISLANDS AND FIXED STRUCTURES General Requirements for Sound signals § 67.10-20 Sound signal tests. (a) Sound signal tests must: (1) Be made by the applicant in...

  16. Two-watt, 4-Kelvin closed cycle refrigerator performance

    NASA Technical Reports Server (NTRS)

    Britcliffe, M.

    1987-01-01

    A 2-watt, 4-K helium refrigerator using the Gifford-McMahon/Joule Thomson cycle is described. The unit features a removable displacer cylinder and high-efficiency, low-pressure drop heat exchangers. These improvements result in a 100 percent increase in cooling power over the existing Deep Space Network system. The effects of the heat exchanger efficiency and Gifford-McMahon expander performance on refrigerator capacity are also discussed.

  17. Reducing Leaking Electricity to 1 Watt

    SciTech Connect

    Meier, A.K.; Huber, Wolfgang; Rosen, Karen

    1998-08-01

    In this study we examine some specific opportunities toreduce standby losses in electronic appliances. A review of powerconsumption levels for the major components responsible for standbyfunctions indicates that nearly all standby functions can be performedwith a total appliance standby power consumption of one watt or less. Wetherefore propose that standby losses be limited to one watt perappliance, a significant reduction from current levels for manyappliances. This target could be achieved with little or no extra cost tomanufacturers and could save over $2 billion in annual U.S. energy costs.Globally, a one-watt plan would lead to a significant reduction in carbonemissions.

  18. God, James Watt, and the public's land

    SciTech Connect

    Wolf, R.

    1981-05-01

    The political career of James Watt, Secretary of the Interior, is chronicled. His current reputation as archenemy of the environmental movement is largely the outgrowth of three and a half years of activity on behalf of the Mountain States Legal Foundation. Since taking office in January 1981, Watt has moved swiftly to impose his individual standards on USDI. Various programs and agencies are being terminated, and public lands may soon be open for mineral and energy exploitation. (7 drawings, 1 photo)

  19. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  20. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  1. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  2. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  3. 46 CFR 105.10-20 - Pressure vacuum relief valve.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in...

  4. 46 CFR 54.10-20 - Marking and stamping.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PRESSURE VESSELS Inspection, Reports, and Stamping § 54.10-20 Marking and stamping. (a) Pressure vessels (replaces UG-116, except paragraph (k), and UG-118). Pressure vessels that are required by § 54.10-3 to be stamped with the...

  5. Social Studies 10, 20, 30: Teacher Resource Manual.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This teacher resource manual was developed to help teachers implement the Canadian province of Alberta's new Social Studies 10, 20, 30 (high school) courses. It offers suggestions on teaching social studies, planning for instruction, and instruction/evaluation strategies. For each grade level, class activities on the two topical areas to be taught…

  6. Construction of a new watt balance with the goal to realize the kilogram in the US

    NASA Astrophysics Data System (ADS)

    Schlamminger, Stephan; Haddad, Darine; Seifert, Frank; Chao, Leon; Newell, David; Pratt, Jon

    2015-04-01

    A watt balance is a mechanical device that compares mechanical power to electrical power. Since electrical power is measured using quantum physics by employing the Josephson effect and the Quantum Hall effect, electrical power can be measured as a product of a known factor, two frequencies, and the Planck constant h. Mechanical power is given by mgv , where m is the mass of a weight, g the local acceleration, and v the velocity. Hence, the watt balance provides a link between mass and Planck's constant. Currently several watt balances worldwide are employed to measure h. A redefinition of the international system of units (SI) is currently in discussion and may become reality as early as 2018. In the new SI, the numerical value of the Planck constant will be fixed and the watt balance is a means to realize the unit of mass. Researchers at NIST are preparing for a new SI and we have started in 2011 with plans to design a new watt balance capable of realizing the kilogram with relative uncertainties of a few parts in 108. Construction of the new watt balance has started in 2014. In my talk, I will show some of the latest results achieved with this apparatus.

  7. A LEGO Watt balance: An apparatus to determine a mass based on the new SI

    NASA Astrophysics Data System (ADS)

    Chao, L. S.; Schlamminger, S.; Newell, D. B.; Pratt, J. R.; Seifert, F.; Zhang, X.; Sineriz, G.; Liu, M.; Haddad, D.

    2015-11-01

    A global effort to redefine our International System of Units (SI) is underway, and the change to the new system is expected to occur in 2018. Within the newly redefined SI, the present base units will still exist but be derived from fixed numerical values of seven reference constants. In particular, the unit of mass (the kilogram) will be realized through a fixed value of the Planck constant h. A so-called watt balance, for example, can then be used to realize the kilogram unit of mass within a few parts in 108. Such a balance has been designed and constructed at the National Institute of Standards and Technology. For educational outreach and to demonstrate the principle, we have constructed a LEGO tabletop watt balance capable of measuring a gram-level masses to 1% relative uncertainty. This article presents the design, construction, and performance of the LEGO watt balance and its ability to determine h.

  8. Nathan Watt: A True American Idol

    ERIC Educational Resources Information Center

    Watt, Diana

    2006-01-01

    In this article, the author profiles her son Nathan Watt, a 14-year-old who was born with Spina Bifida, who does not allow setbacks to keep him from achieving his goals and dreams in the areas of writing, recording, and performing his own music. He has also opened a business website and turned his story, "Anything is Possible," into a color story…

  9. 500 Watt Diesel Fueled TPV Portable Power Supply

    NASA Astrophysics Data System (ADS)

    Horne, W. E.; Morgan, M. D.; Sundaram, V. S.; Butcher, T.

    2003-01-01

    A test-bed 500 watt diesel fueled thermophotovoltaic (TPV) portable power supply is described. The goal of the design is a compact, rugged field portable unit weighing less than 15 pounds without fuel. The conversion efficiency goal is set at 15% fuel energy to electric energy delivered to an external load at 24 volts. A burner/recuperator system has been developed to meet the objectives of high combustion air preheat temperatures with a compact heat exchanger, low excess air operation, and high convective heat transfer rates to the silicon carbide emitter surface. The burner incorporates a air blast atomizer with 100% of the combustion air passing through the nozzle. Designed firing rate of 2900 watts at 0.07 gallons of oil per hour. This incorporates a single air supply dc motor/fan set and avoids the need for a system air compressor. The recuperator consists of three annular, concentric laminar flow passages. Heat from the combustion of the diesel fuel is both radiantly and convectively coupled to the inside wall of a cylindrical silicon carbide emitter. The outer wall of the emitter then radiates blackbody energy at the design temperature of 1400°C. The cylindrical emitter is enclosed in a quartz envelope that separates it from the photovoltaic (PV) cells. Spectral control is accomplished by a resonant mesh IR band-pass filter placed between the emitter and the PV array. The narrow band of energy transmitted by the filter is intercepted and converted to electricity by an array of GaSb PV cells. The array consists of 216 1-cm × 1-cm GaSb cells arranged into series and parallel arrays. An array of heat pipes couple the PV cell arrays to a heat exchanger which is cooled by forced air convection. A brief status of the key TPV technologies is presented followed by data characterizing the performance of the 500 watt TPV system.

  10. Development of a 500-Watt portable generator

    NASA Astrophysics Data System (ADS)

    Knochenhauer, Robert John

    In many commercial and recreational environments where power is unavailable, there is a need for lightweight, efficient, reasonably priced and quiet power sources that can recharge batteries for various portable devices. The current benchmark device is the Honda EU1000i, a 1000-Watt (peak) generator that weighs only 29 pounds (dry) and has a respectable noise level of 59 dB (at 7 meters) under peak power loading. The intent of this thesis study is to focus on the thermal management of a novel generator design that develops peak power of 500-Watts, weighs in at less than 20 pounds (dry) and has a reasonably low noise level at peak power loading. Through the course of this assessment, two key lessons are learned: • Liquid cooling at this scale is possible, but not practical • Renewable power sources (wind turbines and/or solar panels) are viable alternatives when used in environments that offer suitable conditions.

  11. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PHYSICAL REMOVAL OF MICROBIAL CONTAMINATION AGENTS IN DRINKING WATER, WATTS P{REMIER ULTRA 5 REVERSE OSMOSIS DRINKING WATER TREATMENT SYSTEM (POU)

    EPA Science Inventory

    The Watts Premier Ultra 5 system was tested for removal of bacteria and viruses at NSF International's Laboratory. Watts Premier submitted ten units, which were split into two groups of five. One group received 25 days of conditioning prior to challenge testing, while the secon...

  12. Stephen H. Watts: A disciple of Halsted.

    PubMed

    Chitwood, W R

    1976-03-01

    Stephen Watts was one of Dr. William S. Halsted's 17 resident surgeons. He contributed much to experimental, clinical, and didactic surgery during his lifetime. Primarily, his experimental work was in vascular and transplant surgery modeled after Alexis Carrel's efforts. Clinically, he maintained the diversity and expertise propagated by Dr. Halsted. As a teacher he continued the education of young surgeons in the spirit of a true academician. PMID:769215

  13. Recent progress on the BIPM watt balance

    NASA Astrophysics Data System (ADS)

    Fang, Hao; Kiss, Adrien; Robertsson, Lennart; de Mirandés, Estefania; Solve, Stéphane; Lavergne, Thomas; Picard, Alain; Stock, Michael

    2014-08-01

    We present the recent progress on the BIPM (Bureau International des Poids et Mesures) watt balance. The existing apparatus was transferred to the dedicated new laboratory with better thermal and vibrational conditions. The apparatus is fully operational in air. An improvement by a factor of three was achieved on the S/N ratio of both the voltage-to-velocity and force-to-current ratios. The fabrication of the parts of the new magnet is completed and its assembly is finished.

  14. 77 FR 71454 - Notice of Atomic Safety And Licensing Board Reconstitution, Tennessee Valley Authority (Watts Bar...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-30

    ... COMMISSION Notice of Atomic Safety And Licensing Board Reconstitution, Tennessee Valley Authority (Watts Bar, Unit 2) Pursuant to 10 CFR 2.313(c) and 2.321(b), the Atomic Safety and Licensing Board (Board) in the... 16th day of November 2012. E. Roy Hawkens, Chief Administrative Judge, Atomic Safety and...

  15. Results of metallographical diagnostic examination of Navy half-watt thermoelectric converters degraded by accelerated tests

    NASA Technical Reports Server (NTRS)

    Rosell, F. E., Jr.; Rouklove, P. G.

    1977-01-01

    To verify the 15-year reliability of the Navy half-watt radioisotope thermoelectric generator (RTG), bismuth-telluride thermoelectric converters were submitted to testing at high temperatures which accelerated the degradation and caused failure of the converters. Metallographic diagnostic examination of failed units verified failure mechanisms. Results of diagnostic examinations are presented.

  16. Toolkits for Automatic Service Generation: WATT and Kill-A-WATT

    NASA Astrophysics Data System (ADS)

    Qu, Y.; Bollig, E. F.; Erlebacher, G.

    2007-12-01

    As part of the NSF funded VLab consortium [1], we have been involved in the automatic generation of visualization web services using the Web Automation and Translation Toolkit (WATT) compiler. The WATT compiler converts VTK Tcl input scripts into equivalent yet more efficient C++ web services by interpreting code structure, translating and then integrating bindings to the gSOAP library. WATT seeks to completely automate code distribution, integration of transport protocols and interface generation. Ideally, developers should concentrate on writing core applications, and let WATT transform them into web services in the background. Currently, the WATT compiler is limited to converting known Tcl commands and types to C++. For VTK a simple one to one mapping between Tcl and C++ is enforced, but Tcl commands without direct mappings slow the compilation process and require new mappings to be created. Loops and conditional statements are not yet implemented. In an effort to move forward with automation and not get caught up in the details of cross-language compilation, we developed a new application: Kill-A-WATT (KWATT). KWATT is a C++ application that utilizes the C++/Tcl library [2] to evaluate Tcl input scripts using the official Tcl interpreter. During evaluation of the input script, KWATT interprets code structure, integrating communication details via a Tcl-specific SOAP library [3]. Since KWATT drives the Tcl interpreter, the application has access to the full Tcl command base plus the ability to load new commands from other packages. KWATT is not a compiler; instead, it is a stand-alone application that is itself a web service. When KWATT consumes Tcl input, the generated web methods extend the list of previously available commands. This implies that C++ web methods statically defined in KWATT provide a set of standard methods available to every service. Also, since KWATT uses the Tcl interpreter, it has the potential to accept additional Tcl at any time while

  17. A Temporal Network Version of Watts's Cascade Model

    NASA Astrophysics Data System (ADS)

    Karimi, Fariba; Holme, Petter

    Threshold models of cascades in the social and economical sciences explain the spread of opinion and innovation as an effect of social influence. In threshold cascade models, fads or innovation spread between agents as determined by their interactions to other agents and their personal threshold of resistance. Typically, these models do not account for structure in the timing of interaction between the units. In this work, we extend a model of social cascades by Duncan Watts to temporal interaction networks. In our model, we assume agents are influenced by their friends and acquaintances at certain time into the past. That is, the influence of the past ages and becomes unimportant. Thus, our modified cascade model has an effective time window of influence. We explore two types of thresholds—thresholds to fractions of the neighbors, or absolute numbers. We try our model on six empirical datasets and compare them with null models.

  18. Specification for strontium-90 500-watt(e) radioisotopic thermoelectric generator. Final report

    SciTech Connect

    Hammel, T.; Himes, J.; Lieberman, A.; McGrew, J.; Owings, D.; Schumann, F.

    1983-04-01

    A conceptual design for a demonstration 500-watt(e) radioisotopic thermoelectric generator has been created for the Department of Energy. The design effort was divided into two tasks, viz., create a design specification for a capsule strength member that utilizes a standard Strontium-90 fluoride-filled WESF inner liner, and create a conceptual design for a 500-watt(e) RTG. Both tasks have been accomplished. The strength-member specification was designed to survive an external pressure of 24,500 psi and meet the requirements of special-form radioisotope heat sources. Therefore the capsule can, if desired, be licensed for domestic and international transport. The design for the RTG features a radioisotopic heat source, an array of nine capsules in a tungsten biological shield, four current-technology series-connected thermoelectric-conversion modules, low-conductivity thermal insulation, and a passive finned-housing radiator for waste-heat dissipation. The preliminary RTG specification formulated previous to contract award has been met or exceeded. The power source will generate the required power for the required service period at 28 volts dc with a conversion efficiency of 8%, provided the existing in-pool capsules at WESF meet the assumed thermal-inventory requirements.

  19. Design of multihundred-watt dynamic isotope power system for robotic space missions

    NASA Astrophysics Data System (ADS)

    Bents, D. J.; Geng, S. M.; Schreiber, J. G.; Withrow, C. A.; Schmitz, P. C.; McComas, T. J.

    The design of a multihundred-watt dynamic isotope power system (DIPS) based on the US Department of Energy (DOE) general-purpose heat source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) is described as a potential lower cost alternative to radioisotope thermoelectric generators (RTGs). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions. Since the competitive potential of FPSE as an isotope convertor was first identified, work has focused on the feasibility of directly integrating GPHS with the Stirling heater head. Thermal modeling of various radiatively coupled heat source/heater head geometries has been performed using data furnished by the developers of FPSE and GPHS. The analysis indicates that, for the 1050 K heater head configurations considered, GPHS fuel clad temperatures remain safe operating limits under all conditions including shutdown of one engine on a twin engine unit. Based on these results, preliminary characterizations of multihundred-watt units have been established. They indicate that, per electrical watt, the GPHS/small Stirling DIPS will be roughly equivalent to MOD RTG in size and mass but will require about a third the amount of isotope fuel.

  20. Design of multihundred-watt dynamic isotope power system for robotic space missions

    NASA Technical Reports Server (NTRS)

    Bents, D. J.; Geng, S. M.; Schreiber, J. G.; Withrow, C. A.; Schmitz, P. C.; Mccomas, T. J.

    1991-01-01

    The design of a multihundred-watt dynamic isotope power system (DIPS) based on the US Department of Energy (DOE) general-purpose heat source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) is described as a potential lower cost alternative to radioisotope thermoelectric generators (RTGs). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions. Since the competitive potential of FPSE as an isotope convertor was first identified, work has focused on the feasibility of directly integrating GPHS with the Stirling heater head. Thermal modeling of various radiatively coupled heat source/heater head geometries has been performed using data furnished by the developers of FPSE and GPHS. The analysis indicates that, for the 1050 K heater head configurations considered, GPHS fuel clad temperatures remain safe operating limits under all conditions including shutdown of one engine on a twin engine unit. Based on these results, preliminary characterizations of multihundred-watt units have been established. They indicate that, per electrical watt, the GPHS/small Stirling DIPS will be roughly equivalent to MOD RTG in size and mass but will require about a third the amount of isotope fuel.

  1. ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project

    SciTech Connect

    Walker, Randy M; Gross, Ian G; Smith, Cyrus M; Hill, David E

    2011-11-01

    Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to find a Federal sponsor

  2. Registration error study of digital watt-hour meters under distorted conditions

    NASA Astrophysics Data System (ADS)

    Reta-Hernandez, Manuel

    The increasing application of non-linear loads based on the use of converters, uninterruptible power supplies, and other solid-state switching devices has increased the harmonic content in voltage and current at metering points. One of many problems caused by the voltage and current distortion is the effect on the watt-hour meter performance. The digital watt-hour meter is replacing the old induction meter for measuring electric energy, obtaining additional flexibility and functionality. However, the digital meter performance can be deeply affected when a dc current component is added to the distorted conditions. This dissertation presents a study of the digital watt-hour meter's performance under different nonsinusoidal conditions, including a dc current component. The work is divided into two sections: experimental and analytical. The experimental section consists of accuracy testing on several models of digital meters, both single-phase and three-phase units, subjected to computer-controlled distortion. The system setup used for the measurements was designed by using 12-bits data acquisition hardware (DAQ) and virtual-instrument software (VI) installed in a personal computer. Additional testing on electromechanical watt-hour meters is included for comparison purposes.

  3. Multi-Watt Small Radioisotope Thermoelectric Generator Conceptual Design Study

    NASA Astrophysics Data System (ADS)

    Determan, William R.; Otting, William; Frye, Patrick; Abelson, Robert; Ewell, Richard; Miyake, Bob; Synder, Jeff

    2007-01-01

    A need has been identified for a small, light-weight, reliable power source using a radioisotope heat source, to power the next generation of NASA's small surface rovers and exploration probes. Unit performance, development costs, and technical risk are key criteria to be used to select the best design approach. Because safety can be a major program cost and schedule driver, RTG designs should utilize the DOE radioisotope safety program's data base to the maximum extent possible. Other aspects important to the conceptual design include: 1) a multi-mission capable design for atmospheric and vacuum environments, 2) a module size based on one GPHS Step 2 module, 3) use of flight proven thermoelectric converter technologies, 4) a long service lifetime of up to 14 years, 5) maximize unit specific power consistent with all other requirements, and 6) be ready by 2013. Another critical aspect of the design is the thermal integration of the RTG with the rover or probe's heat rejection subsystem and the descent vehicle's heat rejection subsystem. This paper describes two multi-watt RTG design concepts and their integration with a MER-class rover.

  4. Development of over 300-watts average power excimer laser

    NASA Astrophysics Data System (ADS)

    Hirata, Kazuhiro; Kawamura, Joichi; Katou, Hiroyuki; Sajiki, Kazuaki; Okada, Makoto

    2004-05-01

    The high power excimer laser was developed. We have supplied the 240 watts (800 mJ, 300 Hz) average power excimer laser for industrial use, mainly for TFT LCD annealing. We are going to add the 300 watts (1 J, 300 Hz) average power laser for our line-up. This 300 watts new laser is based on the 240 watts laser, but improved some points. The electrodes size is longer and the electrical power circuit is reinforcement. Laser gas recipe is changed to be good for new system. In our test, we could oscillate over 300 watts average power operation. 310 watts servo operation is able to oscillate over 40 million pulses with less than 1.0 per cent for σ output stability. 330 watts servo operation is able to oscillate over 30 million pulses with almost less than 1.0 per cent for σ output stability. Experimental and theoretical studies of various parameters influencing the laser performance will be continued with further investigations and future improvements. We have confidence that it will be possible for this laser to produce higher power with long gas life.

  5. Solid state watt-hour meter

    SciTech Connect

    Hurley, J.R.; Gilker, C.S.

    1984-08-21

    A watt-hour meter is disclosed which includes: a microprocessor coupled to a solid-state Hall-Effect sensor; an electrically alterable ROM coupled to the microprocessor; a power supply; a power outage timing means using the discharge characteristic of a capacitor; apparatus for supplying a 60 Hz clock signal to the microprocessor; a readout device coupled to the microprocessor to provide an indication of the power consumed; an output on the microprocessor for controlling a circuit breaker; and a switch for overriding the microprocessor controlled circuit breaker. The microprocessor and the electrically alterable ROM are connected and programmed: to sense the time of day as determined from an initial time of day and setting the 60 Hz clock signal; to sense and compute the power used by the consumer; to automatically open the circuit breaker when power demand on the electric power source is high and/or the cost per kilowatt hour is high; to automatically close the circuit breaker when the power demand on the source of electric power is low and/or the cost per kilowatt power is low; and to allow a consumer to override the microprocessor's control of the circuit breaker.

  6. Fe(0) Nanomotors in Ton Quantities (10(20) Units) for Environmental Remediation.

    PubMed

    Teo, Wei Zhe; Zboril, Radek; Medrik, Ivo; Pumera, Martin

    2016-03-24

    Despite demonstrating potential for environmental remediation and biomedical applications, the practical environmental applications of autonomous self-propelled micro-/nanorobots have been limited by the inability to fabricate these devices in large (kilograms/tons) quantities. In view of the demand for large-scale environmental remediation by micro-/nanomotors, which are easily synthesized and powered by nontoxic fuel, we have developed bubble-propelled Fe(0) Janus nanomotors by a facile thermally induced solid-state procedure and investigated their potential as decontamination agents of pollutants. These Fe(0) Janus nanomotors, stabilized by an ultrathin iron oxide shell, were fuelled by their decomposition in citric acid, leading to the asymmetric bubble propulsion. The degradation of azo-dyes was dramatically increased in the presence of moving self-propelled Fe(0) nanomotors, which acted as reducing agents. Such enhanced pollutant decomposition triggered by biocompatible Fe(0) (nanoscale zero-valent iron motors), which can be handled in the air and fabricated in ton quantities for low cost, will revolutionize the way that environmental remediation is carried out.

  7. Optimization of solar cell contacts by system cost-per-watt minimization

    NASA Technical Reports Server (NTRS)

    Redfield, D.

    1977-01-01

    New, and considerably altered, optimum dimensions for solar-cell metallization patterns are found using the recently developed procedure whose optimization criterion is the minimum cost-per-watt effect on the entire photovoltaic system. It is also found that the optimum shadow fraction by the fine grid is independent of metal cost and resistivity as well as cell size. The optimum thickness of the fine grid metal depends on all these factors, and in familiar cases it should be appreciably greater than that found by less complete analyses. The optimum bus bar thickness is much greater than those generally used. The cost-per-watt penalty due to the need for increased amounts of metal per unit area on larger cells is determined quantitatively and thereby provides a criterion for the minimum benefits that must be obtained in other process steps to make larger cells cost effective.

  8. The watt balance: determination of the Planck constant and redefinition of the kilogram.

    PubMed

    Stock, M

    2011-10-28

    Since 1889, the international prototype of the kilogram has served as the definition of the unit of mass in the International System of Units (SI). It is the last material artefact to define a base unit of the SI, and it influences several other base units. This situation is no longer acceptable in a time of ever-increasing measurement precision. It is therefore planned to redefine the unit of mass by fixing the numerical value of the Planck constant. At the same time three other base units, the ampere, the kelvin and the mole, will be redefined. As a first step, the kilogram redefinition requires a highly accurate determination of the Planck constant in the present SI system, with a relative uncertainty of the order of 1 part in 10(8). The most promising experiment for this purpose, and for the future realization of the kilogram, is the watt balance. It compares mechanical and electrical power and makes use of two macroscopic quantum effects, thus creating a relationship between a macroscopic mass and the Planck constant. In this paper, the operating principle of watt balance experiments is explained and the existing experiments are reviewed. An overview is given of all available experimental determinations of the Planck constant, and it is shown that further investigation is needed before the redefinition of the kilogram can take place. Independent of this requirement, a consensus has been reached on the form that future definitions of the SI base units will take.

  9. 60-watt isotopic heat source for terrestrial applications

    NASA Astrophysics Data System (ADS)

    Brittain, Wayne M.

    1995-01-01

    A sealed isotopic heat source (IHS) with a nominal thermal inventory of 60 watts is being developed by the U.S. Department of Energy (DOE) for use in remote terrestrial applications that require isotopic power for electrical power generation. Emphasis is on use in radioisotope thermoelectric generators (RTGs) and dynamic cycle power units. The selected IHS design incorporates technologies developed for prior space and terrestrial IHSs to minimize development cost and span time. A General Purpose Heat Source (GPHS) Fueled Clad (FC), comprised of a plutonium-238 enriched pressed-plutonia pellet contained within a vented iridium clad, is the source for thermal energy. The GPHS FC technology was developed by DOE for use in space RTGs. The GPHS FC is, in turn, enclosed within a three-layer cladding system similar to that developed by DOE for earlier terrestrial heat sources. The cladding system provides for retention of the helium gas generated by the decay of the isotopic fuel and containment of the isotopic fuel under normal operating and accident conditions. Test hardware is currently being fabricated and safety demonstration testing is scheduled to be completed in early 1995.

  10. 46 CFR 30.10-20 - Deadweight or DWT-TB/ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... gravity 1.025 at the load waterline corresponding to the summer freeboard assigned according to 46 CFR... 46 Shipping 1 2010-10-01 2010-10-01 false Deadweight or DWT-TB/ALL. 30.10-20 Section 30.10-20...-20 Deadweight or DWT—TB/ALL. The term deadweight or DWT means the difference in metric tons...

  11. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Liquid level gaging devices-TB/ALL. 38.10-20 Section 38... Piping, Valves, Fittings, and Accessory Equipment § 38.10-20 Liquid level gaging devices—TB/ALL. (a) Each tank shall be fitted with a liquid level gaging device of approved design to indicate the maximum...

  12. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Liquid level gaging devices-TB/ALL. 38.10-20 Section 38... Piping, Valves, Fittings, and Accessory Equipment § 38.10-20 Liquid level gaging devices—TB/ALL. (a) Each tank shall be fitted with a liquid level gaging device of approved design to indicate the maximum...

  13. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Liquid level gaging devices-TB/ALL. 38.10-20 Section 38... Piping, Valves, Fittings, and Accessory Equipment § 38.10-20 Liquid level gaging devices—TB/ALL. (a) Each tank shall be fitted with a liquid level gaging device of approved design to indicate the maximum...

  14. Automating Visualization Service Generation with the WATT Compiler

    NASA Astrophysics Data System (ADS)

    Bollig, E. F.; Lyness, M. D.; Erlebacher, G.; Yuen, D. A.

    2007-12-01

    As tasks and workflows become increasingly complex, software developers are devoting increasing attention to automation tools. Among many examples, the Automator tool from Apple collects components of a workflow into a single script, with very little effort on the part of the user. Tasks are most often described as a series of instructions. The granularity of the tasks dictates the tools to use. Compilers translate fine-grained instructions to assembler code, while scripting languages (ruby, perl) are used to describe a series of tasks at a higher level. Compilers can also be viewed as transformational tools: a cross-compiler can translate executable code written on one computer to assembler code understood on another, while transformational tools can translate from one high-level language to another. We are interested in creating visualization web services automatically, starting from stand-alone VTK (Visualization Toolkit) code written in Tcl. To this end, using the OCaml programming language, we have developed a compiler that translates Tcl into C++, including all the stubs, classes and methods to interface with gSOAP, a C++ implementation of the Soap 1.1/1.2 protocols. This compiler, referred to as the Web Automation and Translation Toolkit (WATT), is the first step towards automated creation of specialized visualization web services without input from the user. The WATT compiler seeks to automate all aspects of web service generation, including the transport layer, the division of labor and the details related to interface generation. The WATT compiler is part of ongoing efforts within the NSF funded VLab consortium [1] to facilitate and automate time-consuming tasks for the science related to understanding planetary materials. Through examples of services produced by WATT for the VLab portal, we will illustrate features, limitations and the improvements necessary to achieve the ultimate goal of complete and transparent automation in the generation of web

  15. A 20 GHz, 75 watt helix TWT for space communications

    NASA Technical Reports Server (NTRS)

    Heney, J. F.; Tamashiro, R. N.

    1982-01-01

    A space-qualified, helix-type traveling wave tube is being developed for satellite communication systems in the frequency band of 17.7 to 21.2 GHz. The design approach stresses very high efficiency operation, but with very low distortion. The tube provides multi-mode operation, permitting CW saturated power output levels of 75 watts, 40 watt and 7.5 watts. Operation is also anticipated at 5 dB below these saturation levels to achieve the required low distortion levels. Advanced construction features include a 5 stage depressed collector, a diamond supported helix slow-wave circuit, and a type M dispenser cathode. High reliability and long life (10 years) are objectives of the tube design. The status of the development and recent experimental results are presented.

  16. 10-20-30 training increases performance and lowers blood pressure and VEGF in runners.

    PubMed

    Gliemann, Lasse; Gunnarsson, Thomas P; Hellsten, Ylva; Bangsbo, Jens

    2015-10-01

    The present study examined the effect of training by the 10-20-30 concept on performance, blood pressure (BP), and skeletal muscle angiogenesis as well as the feasibility of completing high-intensity interval training in local running communities. One hundred sixty recreational runners were divided into either a control group (CON; n = 28), or a 10-20-30 training group (10-20-30; n = 132) replacing two of three weekly training sessions with 10-20-30 training for 8 weeks and performance of a 5-km run (5-K) and BP was measured. VO2max was measured and resting muscle biopsies were taken in a subgroup of runners (n = 18). 10-20-30 improved 5-K time (38 s) and lowered systolic BP (2 ± 1 mmHg). For hypertensive subjects in 10-20-30 (n = 30), systolic and diastolic BP was lowered by 5 ± 4 and 3 ± 2 mmHg, respectively, which was a greater reduction than in the non-hypertensive subjects (n = 102). 10-20-30 increased VO2max but did not influence muscle fiber area, distribution or capillarization, whereas the expression of the pro-angiogenic vascular endothelial growth factor (VEGF) was lowered by 22%. No changes were observed in CON. These results suggest that 10-20-30 training is an effective and easily implemented training intervention improving endurance performance, VO2max and lowering BP in recreational runners, but does not affect muscle morphology and reduces muscle VEGF. PMID:25439558

  17. One watt initiative: A global effort to reduce leaking electricity

    SciTech Connect

    Meier, Alan K.; LeBot, Benoit

    1999-05-30

    Many domestic appliances and commercial equipment consume some electric power when they are switched off or not performing their primary purpose. The typical loss per appliance is low (from 1 to 25 W) but, when multiplied by the billions of appliances in houses and in commercial buildings, standby losses represent a significant fraction of total electricity use. Several initiatives to reduce standby losses have appeared in different parts of the world. One proposal, the 1-watt plan, seeks to harmonize these initiatives by establishing a single target for all appliances. This paper explains the background to the 1-watt plan, identifies some unresolved aspects, and gives some estimates of energy savings.

  18. High-efficiency, 200 watt, 12-gigahertz traveling wave tube

    NASA Technical Reports Server (NTRS)

    Kosmahl, H. G.; Mcnary, B. D.; Sauseng, O.

    1974-01-01

    Design and performance of a highly efficient experimental 200-watt traveling wave tube for space communications are described. The tube uses a coupled cavity slow wave structure with periodic permanent magnet focusing. A two-step velocity taper is incorporated in the slow wave structure for velocity resynchronization with the modulated beam. The spent beam is reconditioned in a refocusing section before it is collected in a novel multistage depressed collector. The collector is radiation cooled and heat insulated from the tube body. At saturation the tube provides peak output power of 240 watts with a 35-db gain and an overall maximum efficiency of 56 percent.

  19. A 200 watt traveling wave-tube for the communications technology satellite

    NASA Technical Reports Server (NTRS)

    Jones, C. L.

    1976-01-01

    The results of the design, development, and test of experimental and production units of PPM focused traveling wave tube that produces 225 watts of CW RF power over 85 MHz centered at 12.080 GHz are presented. The tube uses a coupled cavity RF circuit with a velocity taper for greater than 26 percent basic efficiency. Overall efficiency of 50 percent is achieved by the incorporation of a multistage depressed collector designed at NASA Lewis Research Center. The collector is cooled by direct radiation to deep space. The tube was designed to be used for broadcasting power transmission from a satellite.

  20. An Interview with Toni Watt, 2004 Award Winner

    ERIC Educational Resources Information Center

    Journal of Chemical Education, 2004

    2004-01-01

    Toni Austin Watt, the winner of the 2004 James Bryant Conant Award in High School Chemistry Teaching says that she was always an average student and had to invest more time in improving her skills and getting experiences, thus she is exhilarated that her efforts have received such acclaim and is honored that people thought her efforts were…

  1. Fishery status assessment of Watts Bar Reservoir with management recommendations

    SciTech Connect

    Alexander, C.M.

    1987-09-01

    Watts Bar Reservior was impounded in 1942 and has been inventoried 16 of the following 44 years. The previous inventory was 1980. Fish biomass has increased over the years, most noticeably in prey and commercial species. Sport fish biomass has been the most stable overall. However, creel data indicate some important sport species numbers have had extreme fluctuations. 21 refs., 20 figs., 9 tabs.

  2. 300-Watt Power Source Development at the Jet Propulsion Laboratory

    NASA Technical Reports Server (NTRS)

    Valdez, Thomas I.

    2005-01-01

    This viewgraph presentation reviews the JPL program to develop a 300 Watt direct methanol fuel cell. The immediate use of the fuel cell is to power test instrumentation on armored vehicles. It reviews the challenges, the system design and the system demonstration.

  3. Watt balance experiments for the determination of the Planck constant and the redefinition of the kilogram

    NASA Astrophysics Data System (ADS)

    Stock, M.

    2013-02-01

    Since 1889 the international prototype of the kilogram has served as the definition of the unit of mass in the International System of Units (SI). It is the last material artefact to define a base unit of the SI, and it influences several other base units. This situation is no longer acceptable in a time of ever increasing measurement precision. It is therefore planned to redefine the unit of mass by fixing the numerical value of the Planck constant. At the same time three other base units, the ampere, the kelvin and the mole, will be redefined. As a first step, the kilogram redefinition requires a highly accurate determination of the Planck constant in the present SI system, with a relative uncertainty of the order of 1 part in 108. The most promising experiment for this purpose, and for the future realization of the kilogram, is the watt balance. It compares mechanical and electrical power and makes use of two macroscopic quantum effects, thus creating a relationship between a macroscopic mass and the Planck constant. In this paper the background for the choice of the Planck constant for the kilogram redefinition is discussed and the role of the Planck constant in physics is briefly reviewed. The operating principle of watt balance experiments is explained and the existing experiments are reviewed. An overview is given of all presently available experimental determinations of the Planck constant, and it is shown that further investigation is needed before the redefinition of the kilogram can take place. This article is based on a lecture given at the International School of Physics ‘Enrico Fermi’, Course CLXXXV: Metrology and Physical Constants, held in Varenna on 17-27 July 2012. It will also be published in the proceedings of the school, edited by E Bava, M Kühne and A M Rossi (IOS Press, Amsterdam and SIF, Bologna).

  4. Accounting 10-20-30. Senior High School Teacher Resource Manual.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This manual is intended to help teachers meet the objectives of the 1985 Alberta, Canada, Accounting 10-20-30 curriculum. The manual is organized in nine sections. The first section introduces the curriculum and lists the course objectives, and the following section provides a flowchart of the accounting modules. Information on planning the…

  5. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., shall be so designed that the bleed valve maximum opening is not larger than a No. 54 drill size (0.055-inch diameter), unless provided with an excess flow valve. (e) For pressure vessel type tanks each... Piping, Valves, Fittings, and Accessory Equipment § 38.10-20 Liquid level gaging devices—TB/ALL. (a)...

  6. 38 CFR 10.20 - “Demand for payment” certification.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false âDemand for paymentâ... ADJUSTED COMPENSATION Adjusted Compensation; General § 10.20 “Demand for payment” certification. Certification to the execution of demand for payment forms appearing on the reverse side of adjusted...

  7. Alignment of the magnetic circuit of the BIPM watt balance

    NASA Astrophysics Data System (ADS)

    Bielsa, F.; Lu, Y. F.; Lavergne, T.; Kiss, A.; Fang, H.; Stock, M.

    2015-12-01

    The International Bureau of Weights and Measures (BIPM) is developing a watt balance for the forthcoming redefinition of the kilogram. An improved version of the apparatus, based on a new closed magnetic circuit is now being assembled. The new apparatus will significantly reduce the type B uncertainty due to misalignment of the magnetic circuit as this work demonstrates. We present two techniques recently developed to accurately align the magnetic field of the circuit perpendicular to the direction defined by the local acceleration of gravity. Uncertainty below 30 μrad was achieved for both techniques which fulfils the requirements for the BIPM watt balance to enable a Planck constant determination at the 1  ×  10-8 level.

  8. Static phase improvements in the LNE watt balance

    NASA Astrophysics Data System (ADS)

    Pinot, P.; Espel, P.; Liu, Y.; Thomas, M.; Ziane, D.; Palacios-Restrepo, M.-A.; Piquemal, F.

    2016-10-01

    This paper describes the mechanical and electrical modifications carried out on the LNE watt balance to reduce the noise level associated with the static phase. The mechanical improvements concern the home-made balance beam using flexure hinges as pivots of the force comparator. The electrical improvements involve the source used to servo-control the equilibrium position of the beam during the static phase. All these modifications have led to a significant improvement of the repeatability and reproducibility of the results of static phase measurements.

  9. Two-watt radioisotope power generators for underwater applications

    NASA Technical Reports Server (NTRS)

    Caputo, R. S.; Truscello, V. C.

    1974-01-01

    Materials and design considerations are discussed for a low-cost, reliable radio-isotope-fueled thermoelectric generator for use in an undersea application. Plutonium has been selected as fuel, and the generator has to meet design goals of 2 watts after 20 years with a direct output voltage of 6-8 volts. The pressed and sintered form of Bi2Te3 appears to be the most appropriate thermoelectric material. Both fibrous and multilayer foil insulation could be used with proper processing and quality control, but there is less risk with fibrous type insulation. Min-K 1400 is recommended with a nitrogen cover gas. The heat source recommended is a three-layer capsule using T-111 for both the liner and strength member with an outer liner of Hastelloy-C.

  10. The Cabinet Member as a Representative of the President: The Case of James Watt.

    ERIC Educational Resources Information Center

    Renz, Mary Ann

    1987-01-01

    Compares the environmental rhetoric of former U.S. Interior Secretary James Watt and U.S. President Ronald Reagan, explaining that Watt's political value outweighed his political liability. Notes that cabinet members extend a President's influence by reaching issue-specific audiences while maintaining philosophical consistency, and serve as…

  11. 78 FR 53494 - Dam Safety Modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... Dam Safety Modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams AGENCY: Tennessee... preferred alternative in its final environmental impact statement (EIS) for the dam safety modifications at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams. The notice of availability (NOA) of the...

  12. Request for One-Time Shipment of 32 Watt PU-328 Source in 9968 Packaging

    SciTech Connect

    Massey, W.M.

    1998-11-25

    The 9968 package is designed for surface shipment of fissile and other radioactive materials where a high degree of double containment is required. The use of the 9968 radioactive material package for a one time shipment of a 32 watt heat source versus the SARP approved maximum 30 watt heat source is addressed in this report. The analyses show that the small increase in heat load from 30 watts to 32 watts does not substantially increase internal temperatures or pressures that would approach limits for the package. Also, the weight of the content is within the current 9968 package limits. It is concluded that the 32-watt heat source can be safely shipped in the 9968 package and therefore a waiver to ship the source is justified.

  13. Evaluation of study patients with Lyme disease, 10-20-year follow-up.

    PubMed

    Kalish, R A; Kaplan, R F; Taylor, E; Jones-Woodward, L; Workman, K; Steere, A C

    2001-02-01

    To determine the long-term impact of Lyme disease, we evaluated 84 randomly selected, original study patients from the Lyme, Connecticut, region who had erythema migrans, facial palsy, or Lyme arthritis 10-20 years ago and 30 uninfected control subjects. The patients in the 3 study groups and the control group did not differ significantly in current symptoms or neuropsychological test results. However, patients with facial palsy, who frequently had more widespread nervous system involvement, more often had residual facial or peripheral nerve deficits. Moreover, patients with facial palsy who did not receive antibiotics for acute neuroborreliosis more often now had joint pain and sleep difficulty and lower scores on the body pain index and standardized physical component sections of the Short-Form 36 Health Assessment Questionnaire than did antibiotic-treated patients with facial palsy. Thus, the overall current health status of each patient group was good, but sequelae were apparent primarily among patients with facial palsy who did not receive antibiotics for acute neuroborreliosis.

  14. Sludge quality after 10-20 years of treatment in reed bed systems.

    PubMed

    Nielsen, Steen; Bruun, Esben Wilson

    2015-09-01

    The effect on the environment of the operation of sludge treatment in reed beds (STRB) system is seen as quite limited compared to traditional sludge treatment systems such as mechanical dewatering, drying and incineration with their accompanying use of chemicals and energy consumption. There are several STRB systems in Denmark receiving sludge from urban wastewater treatment plants. Stabilization and mineralization of the sludge in the STRB systems occur during a period between 10 and 20 years, where after the basins are emptied and the sludge residue typically is spread on agricultural land. In the present study, the sludge residue quality after treatment periods of 10-20 years from four Danish STRBs is presented. After reduction, dewatering and mineralization of the feed sludge (dry solid content of 0.5-3 %) in the STRB systems, the sludge residue achieved up to 26 % dry solid, depending on the sludge quality and dimensioning of the STRB system. The concentration of heavy metals and hazardous organic compounds in the sludge residue that are listed in the Danish and EU legislation for farmland application of sludge was below the limit values. The nitrogen and phosphorus concentrations as an average in the sludge residue were 28 and 36 g/kg dry solid (DS), respectively. In addition, mineralization on average across the four STRB systems removed up to 27 % of the organic solids in the sludge. The investigation showed that the sludge residue qualities of the four STRBs after a full treatment period all complied with the Danish and European Union legal limits for agricultural land disposal.

  15. Sludge quality after 10-20 years of treatment in reed bed systems.

    PubMed

    Nielsen, Steen; Bruun, Esben Wilson

    2015-09-01

    The effect on the environment of the operation of sludge treatment in reed beds (STRB) system is seen as quite limited compared to traditional sludge treatment systems such as mechanical dewatering, drying and incineration with their accompanying use of chemicals and energy consumption. There are several STRB systems in Denmark receiving sludge from urban wastewater treatment plants. Stabilization and mineralization of the sludge in the STRB systems occur during a period between 10 and 20 years, where after the basins are emptied and the sludge residue typically is spread on agricultural land. In the present study, the sludge residue quality after treatment periods of 10-20 years from four Danish STRBs is presented. After reduction, dewatering and mineralization of the feed sludge (dry solid content of 0.5-3 %) in the STRB systems, the sludge residue achieved up to 26 % dry solid, depending on the sludge quality and dimensioning of the STRB system. The concentration of heavy metals and hazardous organic compounds in the sludge residue that are listed in the Danish and EU legislation for farmland application of sludge was below the limit values. The nitrogen and phosphorus concentrations as an average in the sludge residue were 28 and 36 g/kg dry solid (DS), respectively. In addition, mineralization on average across the four STRB systems removed up to 27 % of the organic solids in the sludge. The investigation showed that the sludge residue qualities of the four STRBs after a full treatment period all complied with the Danish and European Union legal limits for agricultural land disposal. PMID:25422113

  16. Photoionization mass spectrometric study of the prebiotic species formamide in the 10-20 eV photon energy range.

    PubMed

    Leach, Sydney; Jochims, Hans-Werner; Baumgärtel, Helmut

    2010-04-15

    A photoion mass spectrometry study of the prebiotic species formamide was carried out using synchrotron radiation over the photon energy range 10-20 eV. Photoion yield curves were measured for the parent ion and seven fragment ions. The ionization energy of formamide was determined as IE (1(2)A') = 10.220 +/- 0.005 eV, in agreement with a value obtained by high resolution photoelectron spectroscopy. The adiabatic energy of the first excited state of the ion, 1(2)A'', was revised to 10.55 eV. A comparison of the ionization energies of related formamides, amino acids, and polypeptides provides useful information on the varied effects of methylation and shows that polymerization does not substantially alter the ionization properties of the amino acid monomer units. Assignments of the fragment ions and the pathways of their formation by dissociative photoionization were made on the basis of ion appearance energies in conjunction with thermochemical data and the results of earlier electron impact mass spectral studies. Some of the dissociation pathways are considered to involve coupling between the 1(2)A' ground state and the low-lying 1(2)A'' excited state of the cation. Heats of formation are derived for all ions detected and are compared with literature values where they exist. Formation of the HNCO(+) ion occurs by two separate paths, one involving H(2) loss, the other H + H. In the conclusion a brief discussion is given of some astrophysical implications of these results. PMID:20085361

  17. Feasibility study of a 200 watt per kilogram lightweight solar array system. [for interplanetary spacecraft

    NASA Technical Reports Server (NTRS)

    Stanhouse, R.; Cokonis, J.; Rayl, G.

    1976-01-01

    Progress in an investigation of the feasibility of designing a lightweight solar array with a power-to-weight ratio of 200 watts per kilogram is described. This solar array will produce 10,000 watts of electrical power at 1 A.U. at its beginning of life (BOL), and degrade less than 20% over a three year period in interplanetary flight. A review of existing lightweight solar array system concepts is presented along with discussion pertaining to their applicable technology as it relates to a 200 watt/kilogram array. Also presented is a discussion of the candidate development solar cells being considered, and various deployable boom concepts under investigation.

  18. Noisy probability judgment, the conjunction fallacy, and rationality: Comment on Costello and Watts (2014).

    PubMed

    Crupi, Vincenzo; Tentori, Katya

    2016-01-01

    According to Costello and Watts (2014), probability theory can account for key findings in human judgment research provided that random noise is embedded in the model. We concur with a number of Costello and Watts's remarks, but challenge the empirical adequacy of their model in one of their key illustrations (the conjunction fallacy) on the basis of recent experimental findings. We also discuss how our argument bears on heuristic and rational thinking. PMID:26709413

  19. Persistence of immunoglobulin M or immunoglobulin G antibody responses to Borrelia burgdorferi 10-20 years after active Lyme disease.

    PubMed

    Kalish, R A; McHugh, G; Granquist, J; Shea, B; Ruthazer, R; Steere, A C

    2001-09-15

    The interpretation of serological results for patients who had Lyme disease many years ago is not well defined. We studied the serological status of 79 patients who had had Lyme disease 10-20 years ago and did not currently have signs or symptoms of active Lyme disease. Of the 40 patients who had had early Lyme disease alone, 4 (10%) currently had IgM responses to Borrelia burgdorferi, and 10 (25%) still had IgG reactivity to the spirochete, as determined by a 2-test approach (enzyme-linked immunosorbent assay and Western blot). Of the 39 patients who had had Lyme arthritis, 6 (15%) currently had IgM responses and 24 (62%) still had IgG reactivity to the spirochete. IgM or IgG antibody responses to B. burgdorferi may persist for 10-20 years, but these responses are not indicative of active infection.

  20. A discussion of Bl conservation on a two dimensional magnetic field plane in watt balances

    NASA Astrophysics Data System (ADS)

    Li, Shisong; Zhao, Wei; Huang, Songling

    2016-05-01

    The watt balance is an experiment being pursued in national metrology institutes for precision determination of the Planck constant h. In watt balances, the 1/r magnetic field, expected to generate a geometrical factor Bl independent to any coil horizontal displacement, can be created by a strict two dimensional, symmetric (horizontal r and vertical z) construction of the magnet system. In this paper, we present an analytical understanding of magnetic field distribution when the r symmetry of the magnet is broken and the establishment of the Bl conservation is shown. By using either Gauss’s law on magnetism with monopoles or conformal transformations, we extend the Bl conservation to arbitrary two dimensional magnetic planes where the vertical magnetic field component equals zero. The generalized Bl conservation allows a relaxed physical alignment criteria for watt balance magnet systems.

  1. 1-watt composite-slab Er:YAG laser. Revision 1

    SciTech Connect

    Page, R.H.; Bartels, R.A.; Beach, R.J.; Sutton, S.B.; Furu, L.H.; LaSala, J.E.

    1997-02-13

    A diode-side-pumped discrete-optic Er{sup 3+} :YAG laser employs pump-light coupling through a sapphire plate diffusion-bonded to the laser slab, removing heat directly at the pump face of the slab instead of requiring conduction through to its far side. This lowers the temperature in the gain region and gives reduced thermal lensing, which produces exceptional beam quality (M{sup 2} {approx} 1.3) at output powers {approx} 0.3 Watt. Powers above 1 Watt have been demonstrated with peak slope efficiencies {approx}20%. The novel architecture is also applicable to other side-pumped lasers.

  2. The experimental verification of metrological properties of direct current Watt-hour meter

    NASA Astrophysics Data System (ADS)

    Otomański, P.; Zazula, P.

    2013-09-01

    The paper presents a method for evaluating the accuracy of indications of the direct current Watt-hour meters in a designed and constructed measuring system. Such measuring system is composed of two multi-function calibrators, and a specialised high-voltage attachment dedicated for this system, which makes it possible to generate direct voltages in a required range up to 4 kV with a suitably high precision. The authors described in detail particular elements of the measuring system together with the results of its calibration. They showed the results of experiments carried out on a large and representative number of LE3000plus Watt-hour meter items.

  3. High intensity discharge 400-watt sodium ballast. Phase I. Final report

    SciTech Connect

    Felper, G.

    1980-06-01

    The results of a research and development program directed toward design, test, and evaluation of energy efficient High Intensity Discharge (HID) Solid State 400-Watt Ballast lighting system are reported. Phase I of the project which was designed to modify the existing Datapower ballast to LBL configuration, measure performance characteristics, and compare efficiency with a core/coil ballast including energy loss analysis is covered. In addition, Datapower was tasked to build six (6) prototype 400-Watt High Pressure Sodium Ballasts for verification tests by an independent test facility and follow-on performance and life tests at LBL.

  4. 78 FR 33117 - Tennessee Valley Authority; Watts Bar Nuclear Plant, Unit 1; Applications and Amendments to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-03

    ... reasons why intervention should be permitted with particular reference to the following general... entities participating under 10 CFR 2.315(c), must be filed in accordance with the NRC E-Filing rule (72 FR... determines that the reason for granting the exemption from use of E-Filing no longer exists....

  5. 75 FR 12314 - Tennessee Valley Authority: Watts Bar Nuclear Plant, Units 1 and 2 Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-15

    ... update aging equipment and incorporate state-of-the-art technology to meet or exceed regulatory... change was incorporated into the final rule (74 FR 13926, March 27, 2009). From this, it is clear that... have a significant effect on the quality of the human environment (75 FR 3945, dated January 25,...

  6. 78 FR 35989 - Tennessee Valley Authority; Watts Bar Nuclear Plant, Unit 2

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-14

    ... published in the Federal Register on May 1, 2009 (74 FR 20350). A notice of intent to prepare a supplement... scoping process was published in the Federal Register on September 11, 2009 (74 FR 46799). On October 6...). The U.S. Environmental Protection Agency Notice of Filing in the Federal Register (76 FR...

  7. Productive Resources in Students' Ideas about Energy: An Alternative Analysis of Watts' Original Interview Transcripts

    ERIC Educational Resources Information Center

    Harrer, Benedikt W.; Flood, Virginia J.; Wittmann, Michael C.

    2013-01-01

    For over 30 years, researchers have investigated students' ideas about energy with the intent of reforming instructional practice. In this pursuit, Watts contributed an influential study with his 1983 paper "Some alternative views of energy" ["Phys. Educ." 18, 213 (1983)]. Watts' "alternative frameworks"…

  8. Rock the Watt: An Energy Conservation Campaign at Pacific Northwest National Lab

    SciTech Connect

    2016-01-01

    Case study describes Pacific Northwest National Laboratory's (PNNL) three-month Rock the Watt campaign to reduce energy use at its main campus in Richland, Washington. The campaign objectives were to educate PNNL employees about energy conservation opportunities in their workplace and to motivate them to help PNNL save energy and costs and to reduce greenhouse gas emissions.

  9. Heuristics can produce surprisingly rational probability estimates: Comment on Costello and Watts (2014).

    PubMed

    Nilsson, Håkan; Juslin, Peter; Winman, Anders

    2016-01-01

    Costello and Watts (2014) present a model assuming that people's knowledge of probabilities adheres to probability theory, but that their probability judgments are perturbed by a random noise in the retrieval from memory. Predictions for the relationships between probability judgments for constituent events and their disjunctions and conjunctions, as well as for sums of such judgments were derived from probability theory. Costello and Watts (2014) report behavioral data showing that subjective probability judgments accord with these predictions. Based on the finding that subjective probability judgments follow probability theory, Costello and Watts (2014) conclude that the results imply that people's probability judgments embody the rules of probability theory and thereby refute theories of heuristic processing. Here, we demonstrate the invalidity of this conclusion by showing that all of the tested predictions follow straightforwardly from an account assuming heuristic probability integration (Nilsson, Winman, Juslin, & Hansson, 2009). We end with a discussion of a number of previous findings that harmonize very poorly with the predictions by the model suggested by Costello and Watts (2014). PMID:26709414

  10. Electrodes from carbon nanotubes/NiO nanocomposites synthesized in modified Watts bath for supercapacitors

    NASA Astrophysics Data System (ADS)

    Hakamada, Masataka; Abe, Tatsuhiko; Mabuchi, Mamoru

    2016-09-01

    A modified Watts bath coupled with pulsed current electroplating is used to uniformly deposit ultrafine nickel oxide particles (diameter < 4 nm) on multiwalled carbon nanotubes. The capacitance of the multiwalled carbon nanotubes/nickel oxide electrodes was as high as 2480 F g-1 (per mass of nickel oxide), which is close to the theoretical capacitance of NiO.

  11. Stable 1.25 watts CW far infrared laser radiation at the 119 micron methanol line

    NASA Technical Reports Server (NTRS)

    Farhoomand, Jam; Pickett, Herbert M.

    1987-01-01

    Far-infrared CW radiation of 1.25 watts has been obtained at the 119 micron methanol line with a CO2 pump power of 125 watts, and the maximum frequency fluctuation of the free running laser is measured to be less than + or - 100 kHz per hour. Reflecting optics have been used, when possible, to minimize CO2 degradation, and the frequency stability is ensured by cooling the input and output couplers. The input and output assemblies within the lasing medium are enclosed to minimize the external effects on the cavity length and to eliminate the mechanical instabilities associated with the use of bellows. The vibrational bottle-neck is broken by cooling the resonator wall to 5 deg and adding He as the buffer gas.

  12. High efficiency Tm:YAG slab laser with hundred-watts-level output power.

    PubMed

    Liu, Pian; Jin, Lin; Liu, Xuan; Huang, Haitao; Shen, Deyuan

    2016-04-01

    We report on a hundred-watts-level high power Tm:YAG slab laser system operating at room temperature. The laser has a threshold pump power of 46.7 W, benefiting from the good mode matching of an end-pumping scheme and the excellent heat-dissipation capability of our cooling system. At 350 W of incident pump power, 100 W of output power at ∼2015  nm has been generated, corresponding to a slope efficiency of 33.6% with respect to the incident pump power and an optical-to-optical conversion efficiency of 28.6%. As far as we know, this is the highest optical-to-optical conversion efficiency so far achieved in a high power Tm:YAG laser system operating at a hundred-watts level. PMID:27139649

  13. Monolithic watt-level millimeter-wave diode-grid frequency tripler array

    NASA Technical Reports Server (NTRS)

    Hwu, R. J.; Luhmann, N. C., Jr.; Rutledge, D. B.; Hancock, B.; Lieneweg, U.

    1988-01-01

    In order to provide watt-level CW output power throughout the millimeter and submillimeter wave region, thousands of solid-state diodes have been monolithically integrated using a metal grid to produce a highly efficient frequency multiplier. Devices considered include GaAs Schottky diodes, thin MOS diodes, and GaAs Barrier-Intrinsic-N(+)diodes. The performance of the present compact low-cost device has been theoretically and experimentally validated.

  14. Zinc and cadmium residues in striped bass from Cherokee, Norris, and Watts Bar reservoirs

    SciTech Connect

    Tisa, M.S.; Strange, R.J.

    1981-10-01

    Zinc and cadmium concentrations in muscle, liver, and kidney were measured in striped bass (Morone saxatilis) from Cherokee, Norris, and Watts Bar reservoirs in East Tennessee to determine if these metals had contributed to fish kills observed in Cherokee during the 1970's. The range of mean concentrations of zinc from collections of Cherokee striped bass (muscle 11-14, liver 98-106, kidney 88-105 mg Zn/kg dry weight) were comparable to ranges in fish from Norris and Watts Bar (muscle 12-13, liver 83-132, kidney 96-108 mg/kg dry weight). With the exception of concentrations in the kidneys of one collection, cadmium residues from Cherokee striped bass (muscle 0.02-0.09, liver 0.3-0.7, kidney 0.2-4.0 mg Cd/kg dry weight) were also similar to residues from Norris and Watts Bar fish (muscle 0.05-0.13, liver 0.3-2.1, kidney 0.3-0.5 mg Cd/kg dry weight). There were significant differences in tissue residues among seasons (summer 1979, spring 1980, summer 1980) in Cherokee Reservoir, as well as significant differences among the three reservoirs (Cherokee, Norris, Watts Bar) during the same season (spring 1980). All concentrations, however, were well below those reported for fish exposed to the maximum non-harmful concentrations of zinc and the lowest potentially harmful concentration of cadmium and moreover, were within the range typically reported for fish tissues. It is, therefore, believed that in at least the last two years, zinc and cadmium in the tissues of striped bass from Cherokee Reservoir have not been harmful to the fish.

  15. Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

    NASA Technical Reports Server (NTRS)

    Miller, W. S.

    1974-01-01

    A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.

  16. The success of shock wave lithotripsy (SWL) in treating moderate-sized (10-20 mm) renal stones.

    PubMed

    Chung, Vera Y; Turney, Benjamin W

    2016-10-01

    Many centres favour endourological management over shock wave lithotripsy (SWL) in the management of moderate-sized (10-20 mm) renal stones. International guidelines support all available modalities for the treatment of these stones. The aim of this study was to evaluate the efficacy of SWL in the treatment of 10- to 20-mm renal stones. From January 2013 to October 2014, all patients with a renal stone measuring between 10 and 20 mm in maximum diameter on CT scan that were eligible for lithotripsy were included. 130 consecutive patients were evaluated. Demographics, location of stone within the kidney, number of SWL sessions and treatment outcomes were analysed. Treatment success was classified into complete stone clearance and the presence of clinically insignificant residual fragments <4 mm (CIRF). 119 patients (92 %) completed treatment and radiological follow-up. Eleven patients were excluded due to incomplete follow-up data. The mean age was 56.8 (23-88). Male to female ratio was 1.9:1 (78:41) and the mean BMI was 28.4 (17.9-58). The mean stone size was 12.8 mm (10-14 mm: n = 87; 15-20 mm: n = 32). The mean number of treatments was 2.14 and 2.82 for stones 10-14 and 15-20 mm, respectively. Overall treatment success was 66.4 % (combined complete stone clearance and CIRFs). Subdivided by stone size <15 mm and ≥15 mm, the success rate was 70.4 and 53.1 %, respectively. The treatment success by stone location was 65, 64 and 70 % for upper, middle and lower pole stones, respectively and 67 % for PUJ stones. For those who failed SWL treatment, the majority 50 % (n = 20) were managed expectantly, 42.5 % (n = 17) required URS, and 7.5 % (n = 3) required PNL. This study suggests that SWL has an efficacy for treating larger renal stones (10-20 mm) that is equivalent to success rates for smaller stones in other series. As a low-risk and non-invasive procedure SWL should be considered a first-line treatment for these stones. PMID:26743071

  17. Towards ten-watt-level 3-5 µm Raman lasers using tellurite fiber.

    PubMed

    Zhu, Gongwen; Geng, Lixiang; Zhu, Xiushan; Li, Li; Chen, Qian; Norwood, R A; Manzur, T; Peyghambarian, N

    2015-03-23

    Raman lasers based on mid-infrared fibers operating at 3-5 µm atmospheric transparency window are attractive sources for several applications. Compared to fluoride and chalcogenide fibers, tellurite fibers are more advantageous for high power Raman fiber laser sources at 3-5 µm because of their broader Raman gain bandwidth, much larger Raman shift and better physical and chemical properties. Here we report on our simulations for the development of 10-watt-level 3-5 µm Raman lasers using tellurite fibers as the nonlinear gain medium and readily available continuous-wave (cw) and Q-switched erbium-doped fluoride fiber lasers at 2.8 µm as the pump sources. Our results show that a watt-level or even ten-watt-level fiber laser source in the 3-5 µm atmospheric transparency window can be achieved by utilizing the 1st- and 2nd-order Raman scattering in the tellurite fiber. The presented numerical study provides valuable guidance for future 3-5 um Raman fiber laser development. PMID:25837094

  18. Intermittent watt-level ultrasonication facilitates vancomycin release from therapeutic acrylic bone cement.

    PubMed

    Cai, Xun-Zi; Chen, Xian-Zhen; Yan, Shi-Gui; Ruan, Zou-Rong; Yan, Rui-Jian; Ji, Kang; Xu, Jia

    2009-07-01

    Ultrasound holds promise for enhancing the vancomycin release from cement though the length of time when local drug level exceeded the minimum inhibitory concentration (T(>MIC)) was not prolonged by the previous protocol of milliwatt-level ultrasonication. Here vancomycin-loaded cements were subjected to continuous watt-level ultrasonication (CUG), intermittent watt-level ultrasonication (IUG) or no ultrasonication (NUG) for 14 d during immersion in 40-ml phosphate buffered saline (PBS) for 28 d. The T(>MIC) for IUG was more than three times that for NUG. In contrast, T(>MIC) for CUG was slightly shortened. The subtherapeutic release of vancomycin between 15 d and 28 d for IUG was one-ninth that for NUG. The fitting equations indicated a significant enhancement on the burst release and the slow release for IUG; however, the continuous ultrasonication hampered the slow release. SEM images exhibited denser craters and pores with larger diameters and less residual drug in specimens from IUG relative to those from both CUG and NUG. Intermittent watt-level ultrasonication improved the ultrasound-enhanced vancomycin release from cement in view of the prolonged T(>MIC) and the inhibited subtherapeutic release compared with continuous ultrasonication. The mechanisms may be associated with the distinctive effects of detaching forces and pushing forces by acoustic microstreams. PMID:19090490

  19. Feasibility study of a 110 watt per kilogram lightweight solar array system

    NASA Technical Reports Server (NTRS)

    Shepard, N. F.; Stahle, C. V.; Hanson, K. L.; Schneider, A.; Blomstrom, L. E.; Hansen, W. T.; Kirpich, A.

    1973-01-01

    The feasibility of a 10,000 watt solar array panel which has a minimum power-to-mass ratio of 110 watt/kg is discussed. The application of this ultralightweight solar array to three possible missions was investigated. With the interplanetary mission as a baseline, the constraining requirements for a geosynchronous mission and for a manned space station mission are presented. A review of existing lightweight solar array system concepts revealed that changes in the system approach are necessary to achieve the specified 110 watt/kg goal. A comprehensive review of existing component technology is presented in the areas of thin solar cells, solar cell covers, welded interconnectors, substrates and deployable booms. Advances in the state-of-the-art of solar cell and deployable boom technology were investigated. System level trade studies required to select the optimum boom bending stiffness, system aspect ratio, bus voltage level, and solar cell circuit arrangement are reported. Design analysis tasks included the thermal analysis of the solar cell blanket, thermal stress analysis of the solar cell interconnectors/substrate, and the thermostructural loading of the deployed boom.

  20. Monitoring bald eagles using lists of nests: Response to Watts and Duerr

    USGS Publications Warehouse

    Sauer, John R.; Otto, Mark C.; Kendall, William L.; Zimmerman, Guthrie

    2011-01-01

    The post-delisting monitoring plan for bald eagles (Haliaeetus leucocephalus) roposed use of a dual-frame sample design, in which sampling of known nest sites in combination with additional area-based sampling is used to estimate total number of nesting bald eagle pairs. Watts and Duerr (2010) used data from repeated observations of bald eagle nests in Virginia, USA to estimate a nest turnover rate and used this rate to simulate decline in number of occupied nests in list nests over time. Results of Watts and Duerr suggest that, given the rates of loss of nests from the list of known nest sites in Virginia, the list information will be of little value to sampling unless lists are constantly updated. Those authors criticize the plan for not placing sufficient emphasis on updating and maintaining lists of bald eagle nests. Watts and Duerr's metric of turnover rate does not distinguish detectability or temporary nonuse of nests from permanent loss of nests and likely overestimates turnover rate. We describe a multi-state capture–recapture model that allows appropriate estimation of rates of loss of nests, and we use the model to estimate rates of loss from a sample of nests from Maine, USA. The post-delisting monitoring plan addresses the need to maintain and update the lists of nests, and we show that dual frame sampling is an effective approach for sampling nesting bald eagle populations.

  1. Monitoring bald eagles using lists of nests: Response to Watts and Duerr

    USGS Publications Warehouse

    Sauer, J.R.; Otto, M.C.; Kendall, W.L.; Zimmerman, G.S.

    2011-01-01

    The post-delisting monitoring plan for bald eagles (Haliaeetus leucocephalus) roposed use of a dual-frame sample design, in which sampling of known nest sites in combination with additional area-based sampling is used to estimate total number of nesting bald eagle pairs. Watts and Duerr (2010) used data from repeated observations of bald eagle nests in Virginia, USA to estimate a nest turnover rate and used this rate to simulate decline in number of occupied nests in list nests over time. Results of Watts and Duerr suggest that, given the rates of loss of nests from the list of known nest sites in Virginia, the list information will be of little value to sampling unless lists are constantly updated. Those authors criticize the plan for not placing sufficient emphasis on updating and maintaining lists of bald eagle nests. Watts and Duerr's metric of turnover rate does not distinguish detectability or temporary nonuse of nests from permanent loss of nests and likely overestimates turnover rate. We describe a multi-state capture-recapture model that allows appropriate estimation of rates of loss of nests, and we use the model to estimate rates of loss from a sample of nests from Maine, USA. The post-delisting monitoring plan addresses the need to maintain and update the lists of nests, and we show that dual frame sampling is an effective approach for sampling nesting bald eagle populations. ?? 2011 The Wildlife Society.

  2. Sleep characteristics, chronotype and winter depression in 10-20-year-olds in northern European Russia.

    PubMed

    Borisenkov, Mikhail F; Petrova, Natalia B; Timonin, Vladimir D; Fradkova, Lyudmila I; Kolomeichuk, Sergey N; Kosova, Anna L; Kasyanova, Olga N

    2015-06-01

    The purpose of this work was to examine the relationships between geographical coordinates and the prevalence of winter depression (SADW ), and to compare the sleep characteristics and chronotype of youths with and without SADW . We conducted a cross-sectional study of self-reported sleep characteristics, chronotype and winter depression in northern European Russia. Two questionnaires, the Munich Chronotype Questionnaire (MCTQ) and the Seasonal Pattern Assessment Questionnaire (SPAQ), were administered to a total of 3435 adolescents aged 10-20 years (1517 males and 1918 females). The prevalence of SADW in the study population was 8.4% and sub-SADW 11.8%. Four variables predicted the likelihood of SADW in youths: sex [higher in females: odds ratio (OR): 1.87, P < 0.0001], age (increases with age: OR: 1.09, P < 0.001), latitude (higher in the North: OR: 1.49, P < 0.029) and position in the time zone (higher in the West: OR: 1.61, P < 0.001). Later sleeping and waking, longer sleep latencies, more severe sleep inertia, shorter total sleep times and lower sleep efficiencies were observed in both males and females with SADW . The influence of SADW on sleep characteristics was more pronounced on school days. Significant phase delays of the sleep-wake rhythm and severe social jetlag (the difference between the mid-point of sleep phase at weekends and on workdays) were observed in females with SADW , but not in males. There are significant differences in sleep characteristics and chronotype between people with SADW and no-SAD. We demonstrate that both latitude of residence and location within the time zone are significant predictors of SADW in young inhabitants of the North.

  3. 3-D model of a radial flow sub-watt methanol fuel processor

    SciTech Connect

    Holladay, J. D.; Wang, Y.

    2015-10-01

    A 3-D model is presented for a novel sub-watt packed bed reactor. The reactor uses an annular inlet flow combined with a radial flow packed bed reactor. The baseline reactor is compared to a reactor with multiple outlets and a reactor with 3 internal fins. Increasing the outlets from 1 to 4 did improve the flow distribution, but did not increase the performance in the simulation. However, inserting fins allowed a decrease in temperature with same inlet flow of approximately 35K. Or the inlet flow rate could be increased by a factor of 2.8x while maintaining >99% conversion.

  4. Lead test assembly irradiation and analysis Watts Bar Nuclear Plant, Tennessee and Hanford Site, Richland, Washington

    SciTech Connect

    1997-07-01

    The U.S. Department of Energy (DOE) needs to confirm the viability of using a commercial light water reactor (CLWR) as a potential source for maintaining the nation`s supply of tritium. The Proposed Action discussed in this environmental assessment is a limited scale confirmatory test that would provide DOE with information needed to assess that option. This document contains the environmental assessment results for the Lead test assembly irradiation and analysis for the Watts Bar Nuclear Plant, Tennessee, and the Hanford Site in Richland, Washington.

  5. Productive resources in students' ideas about energy: An alternative analysis of Watts' original interview transcripts

    NASA Astrophysics Data System (ADS)

    Harrer, Benedikt W.; Flood, Virginia J.; Wittmann, Michael C.

    2013-12-01

    For over 30 years, researchers have investigated students’ ideas about energy with the intent of reforming instructional practice. In this pursuit, Watts contributed an influential study with his 1983 paper “Some alternative views of energy” [Phys. Educ. 18, 213 (1983)]. Watts’ “alternative frameworks” continue to be used for categorizing students’ non-normative ideas about energy. Using a resources framework, we propose an alternate analysis of student responses from Watts’ interviews. In our analysis, we show how students’ activated resources about energy are disciplinarily productive. We suggest that fostering seeds of scientific understandings in students’ ideas about energy may play an important role in their development of scientific literacy.

  6. Design point characteristics of a 500 - 2500 watt isotope-Brayton power system

    NASA Technical Reports Server (NTRS)

    Barna, G. J.

    1972-01-01

    An analytical study was conducted to investigate the potential performance characteristics of an isotope-Brayton space power system at electric power levels from 500 - 2500 watts. Utilization of the Pu(238) heat source, or capsule, was assumed. A single-loop system design concept was selected. The design concept and results of first-order trade-off studies of the effects of major system parameters on system performance are presented. Results of the study indicate the potential for high system efficiency and high specific power over the entire power range.

  7. Long term spectral irradiance measurements of a 1000-watt xenon arc lamp

    NASA Technical Reports Server (NTRS)

    Schneider, W. E.

    1974-01-01

    Spectral irradiance measurements over the range of 200 to 1060 nm were made on a 1000-watt xenon arc lamp over a period of 1500 hours. Four sets of measurements were made after periods of 70, 525, 1000, and 1500 hours of operation. The lamp (Hanovia Compact Xenon Arc Lamp) was mounted in the NASA Solar Irradiation System. When used in the System, the lamp is used as the radiating source for six test stations. Measurements were made of both the longterm stability (or variation of spectral irradiance as a function of time) and the actual spectral irradiance incident on the test specimen.

  8. Lumen Maintenance Testing of the Philips 60-Watt Replacement Lamp L Prize Entry

    SciTech Connect

    Gordon, Kelly L.; Hafen, Ryan P.; Hathaway, John E.; McCullough, Jeffrey J.

    2012-09-01

    This paper describes testing conducted to evaluate the Philips' L Prize award winning 60-watt LED replacement product's ability to meet the lifetime/lumen maintenance requirement of the competition, which was: "having 70 percent of the lumen value under subparagraph (A) [producing a luminous flux greater than 900 lumens] exceeding 25,000 hours under typical conditions expected in residential use." A custom test apparatus was designed and constructed for this testing and a statistical approach was developed for use in evaluating the test results. This will be the only publicly available, third-party data set of long-term LED product operation.

  9. ELT and Development: The Place of English Language Teaching in Aid Programmes. Report on the Dunford Seminar (England, United Kingdom, August 10-20, 1987).

    ERIC Educational Resources Information Center

    Boyle, Helen, Ed.

    Proceedings of a seminar on the role of English language teaching (ELT) in British technical assistance projects are presented in the form of session and case study narrative summaries. They include descriptions of sessions on the development of ELT projects; a presentation on a project in Oman using a recommended format; a case study simulation…

  10. Feedback of 10-20-day intraseasonal oscillations on seasonal mean SST in the tropical Western North Pacific during boreal spring through fall

    NASA Astrophysics Data System (ADS)

    Wu, Renguang

    2016-09-01

    The present study documents the factors for year-to-year changes in the intensity of 10-20-day intraseasonal oscillations (ISOs) and investigates the feedback of the 10-20-day ISO intensity on seasonal mean sea surface temperature (SST) change in the tropical western North Pacific during boreal spring through fall. An analysis of local correlation reveals a significant negative correlation of the 10-20-day ISO intensity and the seasonal mean SST tendency in the tropical western North Pacific during spring, summer, and fall, suggesting a plausible feedback of the ISO intensity on seasonal mean SST anomaly. The 10-20-day ISO intensity change over the tropical western North Pacific is influenced by El Niño-Southern Oscillation (ENSO) through modulation of vertical shear of zonal winds, lower-level moisture, and upward motion. Due to the phase dependence of location of these ENSO-induced background field changes, the ISO intensity is subject to ENSO influence in different regions during the three seasons. The feedback of the 10-20-day ISO intensity on local seasonal mean SST change in the tropical western North Pacific is demonstrated by separating latent heat flux anomalies into components on different time scales. The ISO-induced latent heat flux anomalies may accumulate in a season and overcome interannual anomalies due to seasonal mean changes. Thus, the ISO-induced surface heat flux change may play an important role in the seasonal mean SST anomaly in the tropical western North Pacific.

  11. Early performance of the 12-GHz, 200-watt transmitter experiment package in the communications technology satellite

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Measured performance characteristics of the transmitter experiment package (TEP) aboard the Communications Technology Satellite for the first 90 operating days in orbit are presented. The TEP consists of a nominal 200-watt output stage tube (OST), a supporting power processing system (PPS), and a variable-conductance heat pipe system (VCHPS). The OST, a traveling-wave tube augmented with a 10-stage depressed collector, has an overall saturated average efficiency of 51.5 percent and an average saturated radiofrequency (RF) output power at center-band frequency of 240 watts. The PPS operated with a measured efficiency of 86.5 percent to 88.5 percent. The VCHPS, using three pipes to conduct heat from the PPS and the body of the OST to a 52-centimeter by 124-centimeter (20.5-in. by 48.75-in.) radiator fin, maintained by the PPS baseplate temperature below 50 C for all operating conditions. The TEP performance characteristics presented include frequency response, RF output power, efficiency, and distortions. Communications characteristics were evaluated by using both video and audio modulated signals.

  12. A five-watt G-M/J-T refrigerator for LHe target at BNL

    NASA Astrophysics Data System (ADS)

    Jia, L. X.; Wang, L.; Addessi, L.; Miglionico, G.; Martin, D.; Leskowicz, J.; McNeill, M.; Yatauro, B.; Tallerico, T.

    2002-05-01

    A five-watts G-M/J-T refrigerator was built and installed for the high-energy physics research at Brookhaven National Laboratory in 2001. A liquid helium target of 8.25 liters was required for an experiment in the proton beam line at the Alternating Gradient Synchrotron (AGS) of BNL. The large radiation heat load towards the target requires a five-watts refrigerator at 4.2 K to support a liquid helium flask of 0.2 meter in diameter and 0.3 meter in length, which is made of Mylar film of 0.35 mm in thickness. The liquid helium flask is thermally exposed to the vacuum windows that are also made of 0.35 mm thickness Mylar film at room temperature. The refrigerator uses a two-stage Gifford-McMahon cryocooler for precooling the Joule-Thomson circuit that consists of five Linde-type heat exchangers. A mass flow rate of 0.8˜1.0 grams per second at 17.7 atm is applied to the refrigerator cold box. The two-phase helium flows between the liquid target and liquid/gas separator by means of a thermosyphon. This paper presents the system design as well as the test results including the control of the thermal oscillation.

  13. A FIVE-WATTS G-M/J-T REFRIGERATOR FOR LHE TARGET AT BNL.

    SciTech Connect

    JIA,L.X.; WANG,L.; ADDESSI,L.; MIGLIONICO,G.; MARTIN,D.; LESKOWICZ,J.; MCNEILL,M.; YATAURO,B.; TALLERICO,T.

    2001-07-16

    A five-watts G-M/J-T refrigerator was built and installed for the high-energy physics research at Brookhaven National Laboratory in 2001. A liquid helium target of 8.25 liters was required for an experiment in the proton beam line at the Alternating Gradient Synchrotron (AGS) of BNL. The large radiation heat load towards the target requires a five-watts refrigerator at 4.2 K to support a liquid helium flask of 0.2 meter in diameter and 0.3 meter in length which is made of Mylar film of 0.35 mm in thickness. The liquid helium flask is thermally exposed to the vacuum windows that are also made of 0.35 mm thickness Mylar film at room temperature. The refrigerator uses a two-stage Gifford-McMahon cryocooler for precooling the Joule-Thomson circuit that consists of five Linde-type heat exchangers. A mass flow rate of 0.8 {approx} 1.0 grams per second at 17.7 atm is applied to the refrigerator cold box. The two-phase helium flows between the liquid target and liquid/gas separator by means of thermosyphon. The paper presents the system design as well as the test results including the control of thermal oscillation.

  14. Feasibility study of a 110 watt per kilogram lightweight solar array system

    NASA Technical Reports Server (NTRS)

    Shepard, N. F.; Stahle, C. V.; Schneider, A.; Hanson, K. L.

    1972-01-01

    An investigation of the feasibility of a solar array panel subsystem which will produce 10,000 watts of electrical output at 1 A.U. with an overall beginning-of-life power-to-weight ratio of at least 110 watt/kg is reported. A description of the current baseline configuration which meets these requirements is presented. A parametric analysis of the single boom, two blanket planar solar array system was performed to arrive at the optimum system aspect ratio. A novel concept for the stiffening of a lightweight solar array by canting the solar cell blankets at a small angle to take advantage of the inherent in-plane stiffness to increase the symmetric out-of-plane frequency is introduced along with a preliminary analysis of the stiffening effect. A comparison of welded and soldered solar cell interconnections leads to the conclusion that welding is required on this ultralightweight solar array. The use of a boron/aluminum composite material in a BI-STEM type deployable boom is investigated as a possible advancement in the state-of-the-art.

  15. Effects of choline chloride on electrodeposited Ni coating from a Watts-type bath

    NASA Astrophysics Data System (ADS)

    Wang, Yurong; Yang, Caihong; He, Jiawei; Wang, Wenchang; Mitsuzak, Naotoshi; Chen, Zhidong

    2016-05-01

    Electrodeposition of bright nickel (Ni) was carried out in a Watts-type bath. Choline chloride (ChCl) was applied as a multifunctional additive and substitute for nickel chloride (NiCl2) in a Watts-type bath. The function of ChCl was investigated through conductivity tests, anodic polarization, and cathodic polarization experiments. The studies revealed that ChCl performed well as a conducting salt, anodic activator, and cathodic inhibitor. The effects of ChCl on deposition rate, preferred orientation, grain size, surface morphology, and microhardness of Ni coatings were also studied. The deposition rate reached a maximum value of greater than 27 μm h-1 when 20 g L-1 ChCl was introduced to the bath. Using X-ray diffraction, it was confirmed that progressive addition of ChCl promoted the preferred crystal orientation modification from (2 0 0) and (2 2 0) to (1 1 1), refined grain size, and enhanced microhardness. The presence of ChCl lowered the roughness of the coating.

  16. Microcombustor-thermoelectric power generator for 10-50 watt applications

    NASA Astrophysics Data System (ADS)

    Marshall, Daniel S.; Cho, Steve T.

    2010-04-01

    Fuel-based portable power systems, including combustion and fuel cell systems, take advantage of the 80x higher energy density of fuel over lithium battery technologies and offer the potential for much higher energy density power sources - especially for long-duration applications, such as unattended sensors. Miniaturization of fuel-based systems poses significant challenges, including processing of fuel in small channels, catalyst poisoning, and coke and soot formation. Recent advances in micro-miniature combustors in the 200Watt thermal range have enabled the development of small power sources that use the chemical energy of heavy fuel to drive thermal-to-electric converters for portable applications. CUBE Technology has developed compact Micro-Furnace combustors that efficiently deliver high-quality heat to optimized thermal-to-electric power converters, such as advanced thermoelectric power modules and Stirling motors, for portable power generation at the 10-50Watt scale. Key innovations include a compact gas-gas recuperator, innovative heavy fuel processing, coke- & soot-free operation, and combustor optimization for low balance-of-plant power use while operating at full throttle. This combustor enables the development of robust, high energy density, miniature power sources for portable applications.

  17. Hysteresis and Related Error Mechanisms in the NIST Watt Balance Experiment

    PubMed Central

    Schwarz, Joshua P.; Liu, Ruimin; Newell, David B.; Steiner, Richard L.; Williams, Edwin R.; Smith, Douglas; Erdemir, Ali; Woodford, John

    2001-01-01

    The NIST watt balance experiment is being completely rebuilt after its 1998 determination of the Planck constant. That measurement yielded a result with an approximately 1×10−7 relative standard uncertainty. Because the goal of the new incarnation of the experiment is a ten-fold decrease in uncertainty, it has been necessary to reexamine many sources of systematic error. Hysteresis effects account for a substantial portion of the projected uncertainty budget. They arise from mechanical, magnetic, and thermal sources. The new experiment incorporates several improvements in the apparatus to address these issues, including stiffer components for transferring the mass standard on and off the balance, better servo control of the balance, better pivot materials, and the incorporation of erasing techniques into the mass transfer servo system. We have carried out a series of tests of hysteresis sources on a separate system, and apply their results to the watt apparatus. The studies presented here suggest that our improvements can be expected to reduce hysteresis signals by at least a factor of 10—perhaps as much as a factor of 50—over the 1998 experiment. PMID:27500039

  18. 70-Watt green laser with near diffraction-limited beam quality

    NASA Astrophysics Data System (ADS)

    Hu, Dan; Eisenberg, Eric; Madasamy, Pratheepan; Mead, Roy; Honea, Eric

    2009-02-01

    A 70-Watt green laser with M2<1.4 has been demonstrated. This green laser consists of an all-fiber-based IR pump laser at 1064 nm and a frequency-conversion module in a compact and flexible configuration. The IR laser produces up to 150 Watts in a polarized diffraction-limited output beam with high spectral brightness for frequency conversion. The IR laser is operating under QCW mode, e.g. 10 MHz with 3~5 ns pulse width or 700 MHz with 50 ps pulse width, to generate sufficient peak power for frequency doubling in the converter module. The IR laser and conversion module are connected via a 5-mm stainless-steel protected delivery fiber for optical beam delivery and an electrical cable harness for electrical power delivery and system control. Both the IR laser and converter module are run through embedded software that controls laser operations such as warm up and shut down. System overview and full characterization results will be presented. Such a high power green laser with near diffraction-limited output in a compact configuration will enable various scientific as well as industrial applications.

  19. Final Project Report on Arsenic Biogeochemistry in the Clinch River and Watts Bar Reservoir, Volume 1: Main Text

    SciTech Connect

    Ford, C.J.

    1993-01-01

    This study was conducted as a special project of the Clinch River Remedial Investigation, which is tasked with conducting a remedial investigation of the Clinch River and Watts Bar Reservoir by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The Clinch River Environmental Restoration Program is funded by the U. S. Department of Energy to investigate the possible corrective actions required to rectify the historic releases of hazardous waste and radioactive contaminants into the Clinch River/Watts Bar Reservoir system. The arsenic study was undertaken after preliminary screening of existing data from the Clinch River and Watts Bar Reservoir. As a result of nonconservative screening, arsenic was assigned as a definitely high priority substance for further human health consideration, and the data showed that arsenic concentrations exceeded benchmark criteria for ecological risk assessment. This study investigated the speciation, distribution, and mobility of arsenic in the sediment, pore water, and the water column seasonally over a 3-year period (1990-1992).

  20. TVA sediment-disturbing activities within the Watts Bar Reservoir and Melton Hill Reservoir areas of the Clinch River

    SciTech Connect

    1993-12-31

    The objectives of Task 5 were to review: (1) the extent of dredging, construction, and other sediment-disturbing activities conducted by the Tennessee Valley Authority (TVA) in potentially contaminated areas of Watts Bar Reservoir; and (2) the disposition of the materials from these activities. This memorandum is the final report for Task 5. This memorandum describes major activities in the Watts Bar Reservoir and Melton Hill Reservoir areas of the Clinch River that possibly resulted in significant disturbance of potentially contaminated sediments. TVA records from the construction of Watts Bar Dam, Kingston Fossil Plant, and Melton Hill Dam were reviewed to facilitate qualitative description of the effect of these activities in disturbing potentially contaminated sediments. The critical period for these activities in disturbing contaminated sediments was during or after 1956 when the peak releases of radioactive contaminants occurred from the Oak Ridge Reservation.

  1. Development and performance of power processor system for 2-gigahertz, 200-watt amplifier for communications technology satellite

    NASA Technical Reports Server (NTRS)

    Siegert, C. E.; Gourash, F.; Vasicek, R. W.

    1977-01-01

    The electrical and environmental requirements for a power processor system (PPS) designed to supply the appropriate voltages and currents to a 200-watt traveling wave tube (TWT) for a communication technology satellite is described. A block diagram of the PPS, the interface requirements between the PPS and spacecraft, the interface requirements between the PPS and 200-watt TWT, and the environmental requirements of the PPS are presented. Also included are discussions of protection circuits, interlocking sequences, and transient requirements. Predictions of the flight performance, based on ground test data, are provided.

  2. Relationship of boreal summer 10-20-day and 30-60-day intraseasonal oscillation intensity over the tropical western North Pacific to tropical Indo-Pacific SST

    NASA Astrophysics Data System (ADS)

    Wu, Renguang; Cao, Xi

    2016-07-01

    The present study contrasts interannual variations in the intensity of boreal summer 10-20-day and 30-60-day intraseasonal oscillations (ISOs) over the tropical western North Pacific and their factors. A pronounced difference is found in the relationship of the two ISOs to El Niño-Southern Oscillation. The 10-20-day ISO intensity is enhanced during El Niño developing summer, whereas the 30-60-day ISO intensity is enhanced during La Niña decaying summer. The above different relationship is interpreted as follows. The equatorial central and eastern Pacific SST anomalies modify vertical wind shear, lower-level moisture, and vertical motion in a southeast-northwest oriented band from the equatorial western Pacific to the tropical western North Pacific where the 10-20-day ISOs originate and propagate. These background field changes modulate the amplitude of 10-20-day ISOs. Preceding equatorial central and eastern Pacific SST anomalies induce SST anomalies in the North Indian Ocean in summer, which in turn modify vertical wind shear and vertical motion over the tropical western North Pacific. The modified background fields influence the amplitude of the 30-60-day ISOs when they reach the tropical western North Pacific from the equatorial region. A feedback of ISO intensity on local SST change is identified in the tropical western North Pacific likely due to a net effect of ISOs on surface heat flux anomalies. This feedback is more prominent from the 10-20-day than the 30-60-day ISO intensity change.

  3. Watt-level millimeter-wave monolithic diode-grid frequency multipliers

    NASA Technical Reports Server (NTRS)

    Hwu, J. R.; Jou, C. F.; Luhmann, N. C., Jr.; Lam, W. W.; Rutledge, D. B.; Hancock, B.; Lieneweg, U.; Maserjian, J.

    1988-01-01

    Wall-level CW solid-state sources in the millimeter-wave region are needed for plasma diagnostics. Monolithic metal-grid arrays containing in excess of 1000 Schottky diodes have produced watt-level output at 66 GHz in a doubler configuration, in excellent agreement with the large-signal predictions of the frequency multiplication. Current efforts are concentrated on fabricating and developing arrays of a novel barrier-intrinsic-N+ (BIN) diode which promise increased performance in a tripler configuration. Initial tests will be made for a configuration where a tripling efficiency of 35 percent at an output frequency of 100 GHz is predicted. Eventual goals are monolithic BIN diode grids operating at 1 THz.

  4. Performance of the 12GHz, 200 watt transmitter experiment package for the Hermes satellite

    NASA Technical Reports Server (NTRS)

    Alexovich, R. E.

    1977-01-01

    Performance characteristics from on-orbit tests of the Transmitter Experiment Package (TEP) for the Hermes Satellite are presented. The TEP consists of a Power Processing System (PPS), an Output Stage Tube (OST) and a Variable Conductance Heat Pipe System (VCHPS), all of which are described. The OST is a coupled-cavity Traveling Wave Tube (TWT) with a Multistage Depressed Collector (MDC) and a stepped velocity-tapered slow wave structure for efficiency enhancement. It has an RF output power of 233 watts and overall efficiency of 50.75 percent at a center band frequency of 12.080 GHz. The PPS provides the required operating voltages, regulation, control and protection for the OST. The VCHPS consists of a fin radiator and three dual-artery stainless steel heat pipes using methanol and a mixture of inert gases. Test results presented include efficiencies, RF output power and body current. A discussion of thermal anomalies which occurred is presented.

  5. Over 10 Watt, collinear blue and green vertical external cavity surface emitting laser

    NASA Astrophysics Data System (ADS)

    Lukowski, Michal L.; Hessenius, Chris; Meyer, Jason T.; Fallahi, Mahmoud

    2016-03-01

    A high power, two color, collinear, blue and green vertical external cavity surface emitting laser (VECSEL) is demonstrated. Two different InGaAs/GaAs VECSEL chips operating with gain centers near 970 nm and 1070 nm are used to make two separate V-folded laser cavities. Two critically phase-matched intracavity lithium triborate nonlinear crystals are used to generate blue and green outputs which are then combined in a polarizing beam splitter. This results in a single beam which contains over 10 watts of combined blue and green output power. This concept can be expanded upon by adding a red output for the creation of a high power, white laser source.

  6. Spatial prisoner's dilemma game with volunteering in Newman-Watts small-world networks

    NASA Astrophysics Data System (ADS)

    Wu, Zhi-Xi; Xu, Xin-Jian; Chen, Yong; Wang, Ying-Hai

    2005-03-01

    A modified spatial prisoner’s dilemma game with voluntary participation in Newman-Watts small-world networks is studied. Some reasonable ingredients are introduced to the game evolutionary dynamics: each agent in the network is a pure strategist and can only take one of three strategies (cooperator, defector, and loner); its strategical transformation is associated with both the number of strategical states and the magnitude of average profits, which are adopted and acquired by its coplayers in the previous round of play; a stochastic strategy mutation is applied when it gets into the trouble of local commons that the agent and its neighbors are in the same state and get the same average payoffs. In the case of very low temptation to defect, it is found that agents are willing to participate in the game in typical small-world region and intensive collective oscillations arise in more random region.

  7. Development of a 75-watt 60-GHz traveling-wave tube for intersatellite communications

    NASA Technical Reports Server (NTRS)

    Rousseau, A. L.; Tammaru, I.; Vaszari, J. P.

    1988-01-01

    This program covers the initial design and development of a 75 watt, 60 GHz traveling-wave tube for intersatellite communications. The objective frequency band was 59 to 64 GHz, with a minimum tube gain of 35 dB. The objective overall efficiency at saturation was 40 percent. The tube, designated the 961H, used a coupled-cavity interaction circuit with periodic permanent magnet beam focusing to minimize the weight. For efficiency enhancement, it incorporated a four-stage depressed collector capable of radiation cooling in space. The electron gun had a low-temperature (type-M) cathode and an isolated anode. Two tubes were built and tested; one feasibility model with a single-stage collector and one experimental model that incorporated the multistage collector.

  8. A watt-class 1-THz backward-wave oscillator based on sine waveguide

    SciTech Connect

    Xu Xiong; Wei Yanyu; Shen Fei; Yin Hairong; Xu Jin; Gong Yubin; Wang Wenxiang

    2012-01-15

    A novel backward wave oscillator was proposed by utilizing a concise sine waveguide slow-wave structure combined with sheet electron beam to operate at terahertz frequency band. First, the design method was described, and the dispersion curve and interaction impedance of the sine waveguide were calculated, then the device oscillation frequency and operating voltage were determined. Next, the circuit transmission losses were learned over the tunable frequency range. Finally, the particle-in-cell simulation method was applied to predict its signal generation performance. The investigation results show that, the backward wave oscillator can produce over 1.9 -W peak power output at the central operating frequency of 1-THz under 27-kV operating voltage and 5-mA beam current. And the interaction efficiency at 1-THz is more than 1.4% with a circuit length of 7.2-mm. It, therefore, will be considered as a promising watt-class terahertz radiation source.

  9. Examination of frit vent from Sixty-Watt Heat Source simulant fueled clad vent set

    SciTech Connect

    Ulrich, G.B.

    1995-11-01

    The flow rate and the metallurgical condition of a frit vent from a simulant-fueled clad vent set (CVS) that had been hot isostatically pressed (HIP) for the Sixty-Watt Heat Source program were evaluated. The flow rate form the defueled vent cup subassembly was reduced approximately 25% from the original flow rate. No obstructions were found to account for the reduced flow rate. Measurements indicate that the frit vent powder thickness was reduced about 30%. Most likely, the powder was compressed during the HIP operation, which increased the density of the powder layer and thus reduced the flow rate of the assembly. All other observed manufacturing attributes appeared to be normal, but the vent hole activation technique needs further refinement before it is used in applications requiring maximum CVS integrity.

  10. First Passage Percolation on the Newman-Watts Small World Model

    NASA Astrophysics Data System (ADS)

    Komjáthy, Júlia; Vadon, Viktória

    2016-02-01

    The Newman-Watts model is given by taking a cycle graph of n vertices and then adding each possible edge (i,j), |i-j|≠ 1 mod n with probability ρ /n for some ρ >0 constant. In this paper we add i.i.d. exponential edge weights to this graph, and investigate typical distances in the corresponding random metric space given by the least weight paths between vertices. We show that typical distances grow as 1/λ log n for a λ >0 and determine the distribution of smaller order terms in terms of limits of branching process random variables. We prove that the number of edges along the shortest weight path follows a Central Limit Theorem, and show that in a corresponding epidemic spread model the fraction of infected vertices follows a deterministic curve with a random shift.

  11. Cascading failures with local load redistribution in interdependent Watts-Strogatz networks

    NASA Astrophysics Data System (ADS)

    Hong, Chen; Zhang, Jun; Du, Wen-Bo; Sallan, Jose Maria; Lordan, Oriol

    2016-05-01

    Cascading failures of loads in isolated networks have been studied extensively over the last decade. Since 2010, such research has extended to interdependent networks. In this paper, we study cascading failures with local load redistribution in interdependent Watts-Strogatz (WS) networks. The effects of rewiring probability and coupling strength on the resilience of interdependent WS networks have been extensively investigated. It has been found that, for small values of the tolerance parameter, interdependent networks are more vulnerable as rewiring probability increases. For larger values of the tolerance parameter, the robustness of interdependent networks firstly decreases and then increases as rewiring probability increases. Coupling strength has a different impact on robustness. For low values of coupling strength, the resilience of interdependent networks decreases with the increment of the coupling strength until it reaches a certain threshold value. For values of coupling strength above this threshold, the opposite effect is observed. Our results are helpful to understand and design resilient interdependent networks.

  12. Evolutionary prisoner's dilemma on Newman-Watts social networks with an asymmetric payoff distribution mechanism

    NASA Astrophysics Data System (ADS)

    Du, Wen-Bo; Cao, Xian-Bin; Yang, Han-Xin; Hu, Mao-Bin

    2010-01-01

    In this paper, we introduce an asymmetric payoff distribution mechanism into the evolutionary prisoner's dilemma game (PDG) on Newman-Watts social networks, and study its effects on the evolution of cooperation. The asymmetric payoff distribution mechanism can be adjusted by the parameter α: if α > 0, the rich will exploit the poor to get richer; if α < 0, the rich are forced to offer part of their income to the poor. Numerical results show that the cooperator frequency monotonously increases with α and is remarkably promoted when α > 0. The effects of updating order and self-interaction are also investigated. The co-action of random updating and self-interaction can induce the highest cooperation level. Moreover, we employ the Gini coefficient to investigate the effect of asymmetric payoff distribution on the the system's wealth distribution. This work may be helpful for understanding cooperative behaviour and wealth inequality in society.

  13. Details of the 1998 Watt Balance Experiment Determining the Planck Constant

    PubMed Central

    Steiner, Richard; Newell, David; Williams, Edwin

    2005-01-01

    The National Institute of Standards and Technology (NIST) watt balance experiment completed a determination of Planck constant in 1998 with a relative standard uncertainty of 87 × 10−9 (k = 1), concurrently with an upper limit on the drift rate of the SI kilogram mass standard. A number of other fundamental physical constants with uncertainties dominated by this result are also calculated. This paper focuses on the details of the balance apparatus, the measurement and control procedures, and the reference calibrations. The alignment procedures are also described, as is a novel mutual inductance measurement procedure. The analysis summary discusses the data noise sources and estimates for the Type B uncertainty contributions to the uncertainty budget. Much of this detail, some historical progression, and a few recent findings have not been included in previous papers reporting the results of this experiment. PMID:27308100

  14. Narrow linewidth picosecond pulsed laser with mega-watt peak power at UV wavelength

    SciTech Connect

    Liu, Yun; Huang, Chunning; Deibele, Craig Edmond

    2013-01-01

    We demonstrate a master oscillator power amplifier (MOPA) burst mode laser system to generate 66 ps/402.5 MHz pulses with mega-watt peak power at 355 nm. The seed laser is based on a direct electro-optic modulation of a fiber laser output. A very high extinction ratio (45 dB) has been achieved by using an adaptive bias control. The multi-stage Nd:YAG amplifier system allows a uniformly temporal shaping of macropulses with tunable pulse duration. The light output form the amplifier is converted to 355 nm and over 1 MW UV peak power is obtained when the laser is operating in a 5- s/10-Hz macropulse mode. The laser output has a transform limited spectrum bandwidth with a very narrow linewidth of individual laser mode. The immediate application of the laser system is the laser assisted hydrogen ion beam stripping for the Spallation Neutron Source (SNS).

  15. Watts linkage based large band low frequency sensors for scientific applications

    NASA Astrophysics Data System (ADS)

    Barone, F.; Giordano, G.; Acernese, F.; Romano, R.

    2016-07-01

    The UNISA Folded Pendulum class of horizontal and vertical sensors, based on an innovative configuration of the classical Watt's linkage mechanical architecture, allows the design and implementation of very large band monolithic sensors (10-7 Hz to102 Hz), whose sensitivities for the most common applications are defined by the noise introduced by their readouts (e.g. <10-12 m /√{ Hz } with classical LVDT readouts). These unique features, coupled other relevant properties like scalability, compactness, lightness, high directivity, frequency tunability (typical resonance frequencies in the band 10-1 Hz to102 Hz), very high immunity to environmental noises and low cost make this class of sensors very effective for the implementation of uniaxial (horizontal and/or vertical) and triaxial seismometers and accelerometers for ground, space and underwater applications, including UHV and cryogenics ones.

  16. ETV REPORT: REMOVAL OF CHEMICAL CONTAMINANTS IN DRINKING WATER – WATTS PREMIER INC. WP-4V DRINKING WATER TREATMENT SYSTEM

    EPA Science Inventory

    The Watts Premier WP-4V POU drinking water treatment system was tested for removal of aldicarb, benzene, cadmium, carbofuran, cesium, chloroform, dichlorvos, dicrotophos, fenamiphos, mercury, mevinphos, oxamyl, strontium, and strychnine. The WP-4V employs a reverse osmosis (RO) m...

  17. 76 FR 34799 - Permanent Dam Safety Modification at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams, TN

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-14

    ... Alternatives: permanent modifications to dam structures and removal of the temporary HESCO baskets before the... Permanent Dam Safety Modification at Cherokee, Fort Loudoun, Tellico, and Watts Bar Dams, TN AGENCY... various alternatives for permanent modifications to the existing dam facilities at Cherokee, Fort...

  18. PHYSICAL REMOVAL OF MICROBIAL CONTAMINANTS IN DRINKING WATER – WATTS PREMIER INC. WP-4V DRINKING WATER TREATMENT SYSTEM

    EPA Science Inventory

    The Watts Premier WP-4V four-stage POU RO system was tested for removal of bacteria and viruses at NSF’s Drinking Water Treatment Systems Laboratory. Five systems were challenged with the bacteriophage viruses fr and MS2, and the bacteria Brevundimonas diminutaEM. The ...

  19. The Evidence for Intravenous Theophylline Levels between 10-20mg/L in Children Suffering an Acute Exacerbation of Asthma: A Systematic Review

    PubMed Central

    2016-01-01

    Background Intravenous theophyllines are a second line treatment for children suffering an acute exacerbation of asthma. Various guidelines and formularies recommend aiming for serum theophylline levels between 10-20mg/l. This review aims to assess the evidence underpinning this recommendation. Methods A systematic review comparing outcomes of children who achieved serum theophylline concentrations between 10-20mg/l with those who did not. Primary outcomes were time until resolution of symptoms, mortality and need for mechanical ventilation. Secondary outcomes were date until discharge criteria are met, actual discharge, adverse effects and FEV1. Data sources MEDLINE, CINAHL, CENTRAL and Web of Science. Search performed in October 2015. Eligibility criteria Interventional or observational studies utilizing intravenous theophyllines for an acute exacerbation of asthma in children where serum theophylline levels and clinical outcomes were measured. Findings 10 RCTs and 2 observational studies were included. Children with serum levels between 10-20mg/l did not have a reduction in duration of symptoms, length of hospital stay or need for mechanical ventilation or better spirometric results compared with levels <10mg/l. Levels above 20mg/l are not associated with higher rates of adverse effects. This study is limited due to heterogeneity in the way theophylline levels were reported and poor surveillance of adverse effects across studies. Conclusion Dosing strategies aiming for levels between 10-20mg/l are not associated with better outcomes. Clinicians should rely on clinical outcomes and not serum levels when using intravenous theophyllines in children suffering an acute exacerbation of asthma. PMID:27096742

  20. 78 FR 72120 - Tennessee Valley Authority Watts Bar Nuclear Plant Unit No. 2; Order Approving Extension of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-02

    ... in the Federal Register on October 22, 2013 (78 FR 62,709). The NRC staff determined that extending... NRC E-Filing rule (72 FR 49139, August 28, 2007). The E-Filing process requires participants to submit... Secretary by email at hearing.docket@nrc.gov , or by telephone at 301-415-1677, to request (1) a...

  1. Quest for Gold: Math/Science Curriculum Resource Units for Gifted and Talented Youngsters: Grades Eight-Twelve.

    ERIC Educational Resources Information Center

    Hayes, Donald G.; Dockery, Linda B., Ed.

    Twelve resource units are presented for the teaching of science and mathematics to gifted students in secondary school. The units present an introduction, tips for teachers, objectives, activities, and materials lists. The units include: "Functions, Relations, and Graphs" (Priscilla Watts); "More Wham to the Gram (A Study of the Metric System)"…

  2. Watt-level self-frequency-doubling Nd:GdCOB lasers.

    PubMed

    Wang, Jiyang; Zhang, Huaijin; Wang, Zhengping; Yu, Haohai; Zong, Nan; Ma, Changqin; Xu, Zuyan; Jiang, Minhua

    2010-05-24

    Laser-diode (LD) pumped self-frequency doubling (SFD) Nd:GdCa4O(BO3)3 (Nd:GdCOB) miniature laser was demonstrated. The output power as high as 1.35 W was achieved which is over than five times than previous values for Nd:LnCa4O(BO3)3 (Ln=Y or Gd) SFD lasers and becomes the highest continuous-wave output power in this field to our knowledge. The maximum optical conversion efficiency is 17%. By comparison, we found that the cutting direction along its optimal phase-matching direction out of the principal planes is the determining factor resulting in this watt-level efficient output power. Different with previous studies, the emission wavelength is centered at about 545 nm. We believed that this efficient laser will become the most competitive one in the existing commercial green lasers, especially in the laser display, medical treatment and spectroscopic analysis etc.

  3. Annual radiological environmental monitoring report: Watts Bar Nuclear Plant, 1992. Operations Services/Technical Programs

    SciTech Connect

    Not Available

    1993-04-01

    This report describes the preoperational environmental radiological monitoring program conducted by TVA in the vicinity of the Watts Bar Nuclear Plant (WBN) in 1992. The program includes the collection of samples from the environment and the determination of the concentrations of radioactive materials in the samples. Samples are taken from stations in the general area of the plant and from areas that will not be influenced by plant operations. Material sampled includes air, water, milk, foods, vegetation, soil, fish, sediment, and direct radiation levels. During plant operations, results from stations near the plant will be compared with concentrations from control stations and with preoperational measurements to determine potential impacts to the public. Exposures calculated from environmental samples were contributed by naturally occurring radioactive materials, from materials commonly found in the environment as a result of atmospheric fallout, or from the operation of other nuclear facilities in the area. Since WBN has not operated, there has been no contribution of radioactivity from the plant to the environment.

  4. Distribution and habitat selection of adult striped bass, Morone saxatilis (Walbaum), in Watts Bar Reservoir, Tennessee

    SciTech Connect

    Cheek, T.E.; Van den Avyle, M.J.; Coutant, C.C.

    1983-09-01

    Biotelemetry was used to determine seasonal distribution patterns and habitat preferences and to evaluate factors affecting movements of adult striped bass (Morone saxatilis) in Watts Bar Reservoir, Tennessee. Distribution and movement of striped bass were strongly influenced by water temperature. Mean distances moved per day during spring and winter were similar but significantly higher than rates for summer and fall. During spring, striped bass moved into headwater areas as water temperatures approached those associated with spawning (15/sup 0/ to 19/sup 0/C). Brief habitation of the main body of the reservoir was noted during summer prior to movement to cool-water refuges located in the Clinch River and Tennessee River arms. No striped bass were located in the main body of the reservoir in early fall when temperatures ranged from 24/sup 0/ to 25/sup 0/C. Fish were located in thermal refuges during this period and occupied water temperatures averaging 20.5/sup 0/C. The only extended period of striped bass habitation of the main body of the reservoir occurred in winter, when the fish occupied a mean water temperature of 11/sup 0/C. Although distribution was restricted during warmer seasons, individual fish moved freely throughout the 116-km-long reservoir at other times, indicating that subpopulations did not exist. 64 references.

  5. Conceptual Design of 500 watt portable thermophotovoltaic power supply using JP-8 fuel

    NASA Astrophysics Data System (ADS)

    DeBellis, Crispin L.; Scotto, Mark V.; Scoles, Stephen W.; Fraas, Lewis

    1997-03-01

    Babcock & Wilcox (B&W) and JX Crystals (JXC) have developed an innovative design for a compact, 500 watt net electric (We), 24-VDC thermophotovoltaic (TPV) power supply using JP-8 fuel. As currently envisioned, the TPV generator will be approximately 20 cm (8 inches) in diameter and 50 cm (20 inches) high, not including a fuel tank and controls. The total system may weigh as little as 7.5 kg (16.5 lb) without fuel. This system will achieve high efficiency and high power density relative to its size through the use of low bandgap gallium antimonide (GaSb) PV cells and a matched emitter. A thermally integrated fuel vaporizer and recuperator will boost system efficiency by transferring the unused energy in the exhaust stream to the incoming fuel and combustion air. At rated conditions and 500 We output, the system is expected to have an overall efficiency of 8% to 10%. This paper examines the trade-offs between system efficiency, power density, and weight required in the selection and configuration of the major system components.

  6. Component development for 500 watt diesel fueled portable thermophotovoltaic (TPV) power supply

    NASA Astrophysics Data System (ADS)

    DeBellis, Crispin L.; Scotto, Mark V.; Fraas, Lewis; Samaras, John; Watson, Ron C.; Scoles, Stephen W.

    1999-03-01

    McDermott Technology, Inc. (MTI) and JX Crystals have developed an innovative design for a compact, 500-watt, thermophotovoltaic (TPV) power supply using diesel fuel. Under a contract with the Defense Advanced Research Projects Agency (DARPA) and managed by the U.S. Army Communications-Electronics Command (CECOM), this design is being reduced to hardware. Prototypes of the two main subsystems, the power converter assembly (PCA) and the burner/emitter/recuperator (BER), have been designed, fabricated, and tested. The PCA uses low-band-gap gallium antimonide (GaSb) photovoltaic (PV) cells for high efficiency and power density. The prototype PCA will be air cooled for system simplicity and portability. However, initial testing was performed on a water-cooled PCA. The BER uses a thermal vaporizer to produce a stable, high-intensity, low-emissions combustion zone inside an impervious emitter. A thermally integrated recuperator is utilized to boost system efficiency by transferring the unused energy in the exhaust stream to the incoming fuel and combustion air. This paper describes the design, testing and performance of the first-generation PCA and BER along with model predictions used for design and evaluation.

  7. Watt-linkage based sensors for low frequency motion measurement and control of spacecrafts and satellites

    NASA Astrophysics Data System (ADS)

    Acernese, F.; Giordano, G.; Romano, R.; Barone, F.

    2014-03-01

    This paper describes a new mechanical application of the Watt-linkage for the development and implementation of mono-axial sensors aimed to low frequency motion measurement and control of spacecrafts and satellites. The basic component of these sensors is the one dimensional UNISA Folded Pendulum mechanical sensor, developed for ground-based applications, whose unique features are due to a very effective optimization of the effects of gravitational force on the folded pendulum mechanical components, that allowed the design and implementation of FP sensors compact (< 10 cm), light (< 200 g), scalable, tunable resonance frequency < 100mHz), with large band (10-7 Hz - 10Hz), high quality factor (Q > 15000 in vacuum at 1Hz), with good immunity to environmental noises and sensitivity, guaranteed by an integrated laser optical readout, and fully adaptable to the specific requirements of the application. In this paper we show how to extend the application of ground-based FP also to space, in absence of gravity, still keeping all the above interesting features and characteristics that make this class of sensors very effective in terms of large band, especially in the low frequency, sensitivity and long term reliability. Preliminary measurements on a prototype confirm the feasibility, showing also that very good performances can be relatively easily obtained.

  8. Quantum transport with long-range steps on Watts-Strogatz networks

    NASA Astrophysics Data System (ADS)

    Wang, Yan; Xu, Xin-Jian

    2016-07-01

    We study transport dynamics of quantum systems with long-range steps on the Watts-Strogatz network (WSN) which is generated by rewiring links of the regular ring. First, we probe physical systems modeled by the discrete nonlinear schrödinger (DNLS) equation. Using the localized initial condition, we compute the time-averaged occupation probability of the initial site, which is related to the nonlinearity, the long-range steps and rewiring links. Self-trapping transitions occur at large (small) nonlinear parameters for coupling ɛ=-1 (1), as long-range interactions are intensified. The structure disorder induced by random rewiring, however, has dual effects for ɛ=-1 and inhibits the self-trapping behavior for ɛ=1. Second, we investigate continuous-time quantum walks (CTQW) on the regular ring ruled by the discrete linear schrödinger (DLS) equation. It is found that only the presence of the long-range steps does not affect the efficiency of the coherent exciton transport, while only the allowance of random rewiring enhances the partial localization. If both factors are considered simultaneously, localization is greatly strengthened, and the transport becomes worse.

  9. Quantification of degeneracy in Hodgkin-Huxley neurons on Newman-Watts small world network.

    PubMed

    Man, Menghua; Zhang, Ya; Ma, Guilei; Friston, Karl; Liu, Shanghe

    2016-08-01

    Degeneracy is a fundamental source of biological robustness, complexity and evolvability in many biological systems. However, degeneracy is often confused with redundancy. Furthermore, the quantification of degeneracy has not been addressed for realistic neuronal networks. The objective of this paper is to characterize degeneracy in neuronal network models via quantitative mathematic measures. Firstly, we establish Hodgkin-Huxley neuronal networks with Newman-Watts small world network architectures. Secondly, in order to calculate the degeneracy, redundancy and complexity in the ensuing networks, we use information entropy to quantify the information a neuronal response carries about the stimulus - and mutual information to measure the contribution of each subset of the neuronal network. Finally, we analyze the interdependency of degeneracy, redundancy and complexity - and how these three measures depend upon network architectures. Our results suggest that degeneracy can be applied to any neuronal network as a formal measure, and degeneracy is distinct from redundancy. Qualitatively degeneracy and complexity are more highly correlated over different network architectures, in comparison to redundancy. Quantitatively, the relationship between both degeneracy and redundancy depends on network coupling strength: both degeneracy and redundancy increase with complexity for small coupling strengths; however, as coupling strength increases, redundancy decreases with complexity (in contrast to degeneracy, which is relatively invariant). These results suggest that the degeneracy is a general topologic characteristic of neuronal networks, which could be applied quantitatively in neuroscience and connectomics.

  10. Quantification of degeneracy in Hodgkin-Huxley neurons on Newman-Watts small world network.

    PubMed

    Man, Menghua; Zhang, Ya; Ma, Guilei; Friston, Karl; Liu, Shanghe

    2016-08-01

    Degeneracy is a fundamental source of biological robustness, complexity and evolvability in many biological systems. However, degeneracy is often confused with redundancy. Furthermore, the quantification of degeneracy has not been addressed for realistic neuronal networks. The objective of this paper is to characterize degeneracy in neuronal network models via quantitative mathematic measures. Firstly, we establish Hodgkin-Huxley neuronal networks with Newman-Watts small world network architectures. Secondly, in order to calculate the degeneracy, redundancy and complexity in the ensuing networks, we use information entropy to quantify the information a neuronal response carries about the stimulus - and mutual information to measure the contribution of each subset of the neuronal network. Finally, we analyze the interdependency of degeneracy, redundancy and complexity - and how these three measures depend upon network architectures. Our results suggest that degeneracy can be applied to any neuronal network as a formal measure, and degeneracy is distinct from redundancy. Qualitatively degeneracy and complexity are more highly correlated over different network architectures, in comparison to redundancy. Quantitatively, the relationship between both degeneracy and redundancy depends on network coupling strength: both degeneracy and redundancy increase with complexity for small coupling strengths; however, as coupling strength increases, redundancy decreases with complexity (in contrast to degeneracy, which is relatively invariant). These results suggest that the degeneracy is a general topologic characteristic of neuronal networks, which could be applied quantitatively in neuroscience and connectomics. PMID:27155043

  11. Sub-watt Power Using an Integrated Fuel Processor and Fuel Cell

    SciTech Connect

    Jones, Evan O. ); Holladay, Jamie D. ); Perry, Steven T. ); Orth, Rick J. ); Rozmiarek, Robert T. ); Hu, Jianli ); Phelps, Max R.; Guzman-Leong, Consuelo E. ); M. Matlosz, W. Ehrfield, et al.

    2002-01-01

    A sub-watt power system is being developed as an alternative to conventional battery technology to better meet energy and power densities needed for operating wireless electronic devices, such as microsensors and microelectromechanical systems. This system integrates a microscale fuel processor, which produces a hydrogen-rich stream from liquid fuels, such as methanol and butane, and a microscale fuel cell, which uses the hydrogen as fuel to produce electric power. Battelle, Pacific Northwest Division and Case Western Reserve University are developing and demonstrating this technology for the Defense Advanced Research Projects Agency. This paper describes work being performed by Battelle on the fuel processor, in particular, catalyst and reactor design and testing. The microscale fuel processor (integrated vaporizer/steam reformer/combustor) assembled, fabricated, and tested during this study generated an equivalent power level of 10 to 500 mWe. This steam reformer test system has a reactor volume of less than 0.5 mm3. Catalyst testing achieved a near-maximum theoretical conversion for methanol with <1% CO in product H2 gas. High conversion and H2 selectivity was also achieved during catalyst testing with butane, but at higher temperatures.

  12. Thermal vacuum tests of a five watt pseudo chip in a SEM-X electronic module clamped in a satellite box

    SciTech Connect

    Greenwood, W.H.; Akau, R.L.

    1995-09-01

    A five watt pseudo chip in the middle of a SEM-X circuit card was tested with various heat conduction paths in a satellite type electronic box while mounted in a vacuum chamber. Previous tests showed low temperature differentials with the use of circuit board clamps. Flight hardware with thin box walls, low mass module frames, and thin heat covers were tested to determine the temperature differential at 5.0 watts as well as at lower powers. The smallest temperature differential was 23 degrees Celsius between the 5 watt pseudo chip and the cold plate.

  13. Assessing the toxicity to fish embryos of surface water from the Watts Bar Lake/Clinch River system

    SciTech Connect

    Ivey, L.J.; Niemela, S.L.; McCracken, M.K.; Greeley, M.S. Jr.

    1995-12-31

    Successful reproduction of fish populations requires the successful development of offspring into new reproductive cohorts. In order to evaluate the ability of fish offspring to survive and develop properly in the Watts Bar Lake/Clinch River system downstream of the Department of Energy facilities in Oak Ridge, TN, a series of fish embryo-larval toxicity tests were conducted on surface water samples from Poplar Creek and the Clinch River adjacent to the Oak Ridge Reservation. Quarterly tests were conducted over an eighteen-month interval with embryos from laboratory stocks of the Japanese medaka (Oryzias latipes). Eggs obtained from largemouth bass (Micropterus salmoides) and redbreast sunfish (Lepomis auritus) collected from reference sites during their respective breeding seasons were fertilized in vitro for additional embryo-larval tests utilizing fish species indigenous to the Watts Bar/Clinch River system. Average survival of medaka embryos decreased significantly in water from Poplar Creek sites within the Oak Ridge Reservation, coincident with an increase in the prevalence of certain developmental abnormalities. Similar but less pronounced results were also obtained with redbreast sunfish embryos. Development of largemouth bass eggs was not adversely affected by any of the tested water samples. These findings suggest that the development of fish eggs and fry in certain reaches of the Watts Bar Lake/Clinch River system may be negatively impacted by activities on the Oak Ridge Reservation.

  14. Time Delay and Long-Range Connection Induced Synchronization Transitions in Newman-Watts Small-World Neuronal Networks

    PubMed Central

    Qian, Yu

    2014-01-01

    The synchronization transitions in Newman-Watts small-world neuronal networks (SWNNs) induced by time delay and long-range connection (LRC) probability have been investigated by synchronization parameter and space-time plots. Four distinct parameter regions, that is, asynchronous region, transition region, synchronous region, and oscillatory region have been discovered at certain LRC probability as time delay is increased. Interestingly, desynchronization is observed in oscillatory region. More importantly, we consider the spatiotemporal patterns obtained in delayed Newman-Watts SWNNs are the competition results between long-range drivings (LRDs) and neighboring interactions. In addition, for moderate time delay, the synchronization of neuronal network can be enhanced remarkably by increasing LRC probability. Furthermore, lag synchronization has been found between weak synchronization and complete synchronization as LRC probability is a little less than 1.0. Finally, the two necessary conditions, moderate time delay and large numbers of LRCs, are exposed explicitly for synchronization in delayed Newman-Watts SWNNs. PMID:24810595

  15. Initial clinical results of laser prostatectomy procedure for symptomatic BPH using a new 50-watt diode laser (wavelength 1000 nm)

    NASA Astrophysics Data System (ADS)

    Bhatta, Krishna M.

    1995-05-01

    Lasers have been used for symptomatic Benign Prostatic Hyperplasia (BPH) in both contact and non-contact modes with reported success rates equivalent to that of Transurethral Resection of Prostate (TURP). A new high power diode laser (Phototome), capable of delivering up to 50 watts of 1000 nm wavelength laser power via a 1 mm quartz fiber, was used to treat 15 patients with symptomatic BPH. Five patients had acute retention, 3 had long term catheter (7 - 48 months), and 8 had severe prostatism. Spinal anesthesia was used in 11 patients, and 4 patients had local anesthesia and intravenous sedation. Four quadrant coagulation with an angle firing probe delivering 50 watts of laser power for 60 seconds in one quadrant was used as the core of the treatment in 11 patients, contact vaporization of BPH tissue was performed in one patient using a 4.5 mm ball tip was used in one patient and three patients with bladder neck stenosis had bladder neck incision performed using a 1 mm quartz fiber delivering 30 watts of laser power. A foley catheter was left indwelling and removed after 5 - 7 days. All patients except one were catheter free after a mean of 8 days. One patient continued to have severe prostatism and had a TURP performed with good results after 3 months of his laser prostatectomy procedure. AUA symptom scores available in 11 patients was found to be 4 after 1 - 3 months of the initial procedure.

  16. Time delay and long-range connection induced synchronization transitions in Newman-Watts small-world neuronal networks.

    PubMed

    Qian, Yu

    2014-01-01

    The synchronization transitions in Newman-Watts small-world neuronal networks (SWNNs) induced by time delay τ and long-range connection (LRC) probability P have been investigated by synchronization parameter and space-time plots. Four distinct parameter regions, that is, asynchronous region, transition region, synchronous region, and oscillatory region have been discovered at certain LRC probability P = 1.0 as time delay is increased. Interestingly, desynchronization is observed in oscillatory region. More importantly, we consider the spatiotemporal patterns obtained in delayed Newman-Watts SWNNs are the competition results between long-range drivings (LRDs) and neighboring interactions. In addition, for moderate time delay, the synchronization of neuronal network can be enhanced remarkably by increasing LRC probability. Furthermore, lag synchronization has been found between weak synchronization and complete synchronization as LRC probability P is a little less than 1.0. Finally, the two necessary conditions, moderate time delay and large numbers of LRCs, are exposed explicitly for synchronization in delayed Newman-Watts SWNNs.

  17. 120 Watt Split-Mount 30 GHz Amplifier for the Advanced Communications Technology Satellite

    NASA Technical Reports Server (NTRS)

    Lazar, John; Jacquez, Andrew

    1996-01-01

    This paper describes an amplifier for a Ka-band communication system. The amplifier consists of two units. The radio frequency (RF) unit is mounted at the antenna to provide power to the antenna, while the power supply unit is located 12 meters away in a control station. The two units are connected by a waveguide run and a set of umbilical cables to provide all the necessary inputs for the operation and protection of the RF unit. Specifications and actual performance data are presented and discussed. Special features of each unit to meet the specifications are described in detail.

  18. Life test result of Ricor K529N 1watt linear cryocooler

    NASA Astrophysics Data System (ADS)

    Nachman, Ilan; Veprik, Alexander; Pundak, Nachman

    2007-04-01

    The authors summarize the results of the accelerated life testing of the Ricor type K529N 1 Watt linear split Stirling cooler. The test was conducted in the period 2003-2006, during which the cooler accumulated in excess of 27,500 working hours at an elevated ambient temperature, which is equivalent to 45,000 hours at normal ambient conditions, and performed about 7,500 operational cycles including cooldown and steady-state phases. The cryocooler performances were assessed through the cooldown time and power consumption; no visible degradation in performances was observed. After the cooler failure and the compressor disassembling, an electrical short was discovered in the driving coil. The analysis has shown that the wire insulating varnish was not suitable for such elevated temperatures. It is important to note that the cooler under test was taken from the earliest engineering series; in the later manufacturing line military grade wire with high temperature insulation was used, no customer complaints have been recorded in this instance Special attention was paid to the thorough examination of the technical condition of the critical components of the cooler interior. In particular, dynamic piston-cylinder seal, flying leads, internal O-rings and driving coil were examined in the compressor. As to the cold head, we focused on studying the conditions of the dynamic bushing-plunger seal, O-rings and displacer-regenerator. In addition, a leak test was performed to assess the condition of the metallic crushed seals. From the analysis, the authors draw the conclusion that the cooler design is adequate for long life performance (in excess of 20,000 working hours) applications.

  19. De Novo Transcriptome Sequencing of Oryza officinalis Wall ex Watt to Identify Disease-Resistance Genes.

    PubMed

    He, Bin; Gu, Yinghong; Tao, Xiang; Cheng, Xiaojie; Wei, Changhe; Fu, Jian; Cheng, Zaiquan; Zhang, Yizheng

    2015-12-10

    Oryza officinalis Wall ex Watt is one of the most important wild relatives of cultivated rice and exhibits high resistance to many diseases. It has been used as a source of genes for introgression into cultivated rice. However, there are limited genomic resources and little genetic information publicly reported for this species. To better understand the pathways and factors involved in disease resistance and accelerating the process of rice breeding, we carried out a de novo transcriptome sequencing of O. officinalis. In this research, 137,229 contigs were obtained ranging from 200 to 19,214 bp with an N50 of 2331 bp through de novo assembly of leaves, stems and roots in O. officinalis using an Illumina HiSeq 2000 platform. Based on sequence similarity searches against a non-redundant protein database, a total of 88,249 contigs were annotated with gene descriptions and 75,589 transcripts were further assigned to GO terms. Candidate genes for plant-pathogen interaction and plant hormones regulation pathways involved in disease-resistance were identified. Further analyses of gene expression profiles showed that the majority of genes related to disease resistance were all expressed in the three tissues. In addition, there are two kinds of rice bacterial blight-resistant genes in O. officinalis, including two Xa1 genes and three Xa26 genes. All 2 Xa1 genes showed the highest expression level in stem, whereas one of Xa26 was expressed dominantly in leaf and other 2 Xa26 genes displayed low expression level in all three tissues. This transcriptomic database provides an opportunity for identifying the genes involved in disease-resistance and will provide a basis for studying functional genomics of O. officinalis and genetic improvement of cultivated rice in the future.

  20. De Novo Transcriptome Sequencing of Oryza officinalis Wall ex Watt to Identify Disease-Resistance Genes

    PubMed Central

    He, Bin; Gu, Yinghong; Tao, Xiang; Cheng, Xiaojie; Wei, Changhe; Fu, Jian; Cheng, Zaiquan; Zhang, Yizheng

    2015-01-01

    Oryza officinalis Wall ex Watt is one of the most important wild relatives of cultivated rice and exhibits high resistance to many diseases. It has been used as a source of genes for introgression into cultivated rice. However, there are limited genomic resources and little genetic information publicly reported for this species. To better understand the pathways and factors involved in disease resistance and accelerating the process of rice breeding, we carried out a de novo transcriptome sequencing of O. officinalis. In this research, 137,229 contigs were obtained ranging from 200 to 19,214 bp with an N50 of 2331 bp through de novo assembly of leaves, stems and roots in O. officinalis using an Illumina HiSeq 2000 platform. Based on sequence similarity searches against a non-redundant protein database, a total of 88,249 contigs were annotated with gene descriptions and 75,589 transcripts were further assigned to GO terms. Candidate genes for plant–pathogen interaction and plant hormones regulation pathways involved in disease-resistance were identified. Further analyses of gene expression profiles showed that the majority of genes related to disease resistance were all expressed in the three tissues. In addition, there are two kinds of rice bacterial blight-resistant genes in O. officinalis, including two Xa1 genes and three Xa26 genes. All 2 Xa1 genes showed the highest expression level in stem, whereas one of Xa26 was expressed dominantly in leaf and other 2 Xa26 genes displayed low expression level in all three tissues. This transcriptomic database provides an opportunity for identifying the genes involved in disease-resistance and will provide a basis for studying functional genomics of O. officinalis and genetic improvement of cultivated rice in the future. PMID:26690414

  1. Results of Performance Tests Performed on the John Watts Casing Connection on 7" Pipe

    SciTech Connect

    John D. Watts

    1999-08-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his threaded connection developed for oilfield oil and gas service. This particular test required the application of a variety of loads including axial tension and compression, internal pressure (gas), external pressure (water), bending and both low and elevated temperature. These loads were used to determine the sealing and structural limits of the connection. The connection design tested had tapered threads with 10 threads per inch. A square thread form and a round thread form were tested. The square thread form had a 2{sup o} load flank and 15{sup o} stab flank. The round thread had a 0{sup o} load flank and 20{sup o} stab flank. Most of the testing was performed on the round thread form. Both a coupled connection design and an integral connection design were tested. The coupling was a pin by pin (male) thread, with the pipe having a box (female) thread. Both designs have outside and inside diameters that are flush with the pipe body. Both designs also contain a small external shoulder. The test procedure selected for this evaluation was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test was performed with four coupled samples and included most of these loads. Two integral samples were also included for limit load testing ISO makeup/breakout tests are divided into three types--initial makeup, IML1, repeated makeup within the same sample, MBL, and repeated makeup using several samples called round robin, RR. IMU and MBL were performed in this project. The ISO sealing and structural procedure is divided into four primary tests and identified as Series A, B, C and Limit Load (failure

  2. Results of Performance Tests Performed on the John Watts WW Casing Connection on 7" Pipe

    SciTech Connect

    John D. Watts

    2000-02-01

    Stress Engineering Services (SES) was contracted by Mr. John Watts to test his ''WW'' threaded connection developed for oilfield oil and gas service. This work was a continuation of testing performed by SES as reported in August of 1999. The connection design tested was identified as ''WW''. The samples were all integral (no coupled connections) and contained a wedge thread form with 90{sup o} flank angles relative to the pipe centerline. The wedge thread form is a variable width thread that primarily engages on the flanks. This thread form provides very high torque capacity and good stabbing ability and makeup. The test procedure selected for one of the samples was the newly written ISO 13679 procedure for full scale testing of casing and tubing connections, which is currently going through the ISO acceptance process. The ISO procedure requires a variety of tests that includes makeup/breakout testing, internal gas sealability/external water sealability testing with axial tension, axial compression, bending, internal gas thermal cycle tests and limit load (failure) tests. This test procedure was performed with one sample. Four samples were tested to failure. Table 1 contains a summary of the tasks performed by SES. The project started with the delivery of test samples by Mr. Watts. Pipe from the previous round of tests was used for the new samples. Figure 1 shows the structural and sealing results relative to the pipe body. Sample 1 was used to determine the torque capacity of the connection. Torque was applied to the capacity of SES's equipment which was 28,424 ft-lbs. From this, an initial recommended torque range of 7,200 to 8,800 ft-lbs. was selected. The sample was disassembled and while there was no galling observed in the threads, the end of the pin had collapsed inward. Sample 2 received three makeups. Breakouts 1 and 2 also had collapsing of the pin end, with no thread galling. From these make/breaks, it was decided to reduce the amount of lubricant

  3. Assessing ecological risks to the fish community from residual coal fly ash in Watts Bar Reservoir, Tennessee

    SciTech Connect

    Rigg, David K.; Wacksman, Mitch N.; Iannuzzi, Jacqueline; Baker, Tyler F.; Adams, Marshall; Greeley, Jr., Mark Stephen

    2014-12-18

    For this research, extensive site-specific biological and environmental data were collected to support an evaluation of risks to the fish community in Watts Bar Reservoir from residual ash from the December 2008 Tennessee Valley Authority (TVA) Kingston ash release. This paper describes the approach used and results of the risk assessment for the fish community, which consists of multiple measurement endpoints (measures of exposure and effects) for fish. The lines of evidence included 1) comparing postspill annual fish community assessments with nearby prespill data and data from other TVA reservoirs, 2) evaluating possible effects of exposures of fish eggs and larval fish to ash in controlled laboratory toxicity tests, 3) evaluating reproductive competence of field-exposed fish, 4) assessing individual fish health through physical examination, histopathology, and blood chemistry, 5) comparing fish tissue concentrations with literature-based critical body residues, and 6) comparing concentrations of ash-related contaminants in surface waters with US Environmental Protection Agency's (USEPA) Ambient Water Quality Standards for Fish and Aquatic Life. These measurement endpoints were treated as independent lines of evidence that were integrated into an overall weight-of-evidence estimate of risk to the fish community. Collectively, the data and analysis presented here indicate that ash and ash-related constituents pose negligible risks to the fish communities in Watts Bar Reservoir. This conclusion contradicts the predictions by some researchers immediately following the ash release of devastating effects on the aquatic ecology of Watts Bar Reservoir. The information presented in this article reaffirms the wisdom of carefully evaluating the evidence before predicting probable ecological effects of a major event such as the TVA Kingston ash release. Lastly, this study demonstrates that a thorough and detailed investigation using multiple measurement endpoints is needed

  4. Assessing ecological risks to the fish community from residual coal fly ash in Watts Bar Reservoir, Tennessee.

    PubMed

    Rigg, David K; Wacksman, Mitch N; Iannuzzi, Jacqueline; Baker, Tyler F; Adams, Marshall; Greeley, Mark S

    2015-01-01

    Extensive site-specific biological and environmental data were collected to support an evaluation of risks to the fish community in Watts Bar Reservoir from residual ash from the December 2008 Tennessee Valley Authority (TVA) Kingston ash release. This article describes the approach used and results of the risk assessment for the fish community, which consists of multiple measurement endpoints (measures of exposure and effects) for fish. The lines of evidence included 1) comparing postspill annual fish community assessments with nearby prespill data and data from other TVA reservoirs, 2) evaluating possible effects of exposures of fish eggs and larval fish to ash in controlled laboratory toxicity tests, 3) evaluating reproductive competence of field-exposed fish, 4) assessing individual fish health through physical examination, histopathology, and blood chemistry, 5) comparing fish tissue concentrations with literature-based critical body residues, and 6) comparing concentrations of ash-related contaminants in surface waters with US Environmental Protection Agency's (USEPA) Ambient Water Quality Standards for Fish and Aquatic Life. These measurement endpoints were treated as independent lines of evidence that were integrated into an overall weight-of-evidence estimate of risk to the fish community. Collectively, the data and analysis presented here indicate that ash and ash-related constituents pose negligible risks to the fish communities in Watts Bar Reservoir. This conclusion contradicts the predictions by some researchers immediately following the ash release of devastating effects on the aquatic ecology of Watts Bar Reservoir. The information presented in this article reaffirms the wisdom of carefully evaluating the evidence before predicting probable ecological effects of a major event such as the TVA Kingston ash release. This study demonstrates that a thorough and detailed investigation using multiple measurement endpoints is needed to properly evaluate

  5. Assessing ecological risks to the fish community from residual coal fly ash in Watts Bar Reservoir, Tennessee

    DOE PAGES

    Rigg, David K.; Wacksman, Mitch N.; Iannuzzi, Jacqueline; Baker, Tyler F.; Adams, Marshall; Greeley, Jr., Mark Stephen

    2014-12-18

    For this research, extensive site-specific biological and environmental data were collected to support an evaluation of risks to the fish community in Watts Bar Reservoir from residual ash from the December 2008 Tennessee Valley Authority (TVA) Kingston ash release. This paper describes the approach used and results of the risk assessment for the fish community, which consists of multiple measurement endpoints (measures of exposure and effects) for fish. The lines of evidence included 1) comparing postspill annual fish community assessments with nearby prespill data and data from other TVA reservoirs, 2) evaluating possible effects of exposures of fish eggs andmore » larval fish to ash in controlled laboratory toxicity tests, 3) evaluating reproductive competence of field-exposed fish, 4) assessing individual fish health through physical examination, histopathology, and blood chemistry, 5) comparing fish tissue concentrations with literature-based critical body residues, and 6) comparing concentrations of ash-related contaminants in surface waters with US Environmental Protection Agency's (USEPA) Ambient Water Quality Standards for Fish and Aquatic Life. These measurement endpoints were treated as independent lines of evidence that were integrated into an overall weight-of-evidence estimate of risk to the fish community. Collectively, the data and analysis presented here indicate that ash and ash-related constituents pose negligible risks to the fish communities in Watts Bar Reservoir. This conclusion contradicts the predictions by some researchers immediately following the ash release of devastating effects on the aquatic ecology of Watts Bar Reservoir. The information presented in this article reaffirms the wisdom of carefully evaluating the evidence before predicting probable ecological effects of a major event such as the TVA Kingston ash release. Lastly, this study demonstrates that a thorough and detailed investigation using multiple measurement endpoints

  6. The ( 3He, tf) as a surrogate reaction to determine ( n, f) cross sections in the 10-20 MeV energy range

    NASA Astrophysics Data System (ADS)

    Basunia, M. S.; Clark, R. M.; Goldblum, B. L.; Bernstein, L. A.; Phair, L.; Burke, J. T.; Beausang, C. W.; Bleuel, D. L.; Darakchieva, B.; Dietrich, F. S.; Evtimova, M.; Fallon, P.; Gibelin, J.; Hatarik, R.; Jewett, C. C.; Lesher, S. R.; McMahan, M. A.; Rodriguez-Vieitez, E.; Wiedeking, M.

    2009-06-01

    The surrogate reaction 238U( 3He, tf) is used to determine the 237Np( n, f) cross section indirectly over an equivalent neutron energy range from 10 to 20 MeV. A self-supporting ˜761 μg/cm 2 metallic 238U foil was bombarded with a 42 MeV 3He 2+ beam from the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory (LBNL). Outgoing charged particles and fission fragments were identified using the Silicon Telescope Array for Reaction Studies (STARS) consisted of two 140 μm and one 1000 μm Micron S2 type silicon detectors. The 237Np( n, f) cross sections, determined indirectly, were compared with the 237Np( n, f) cross section data from direct measurements, the Evaluated Nuclear Data File (ENDF/B-VII.0), and the Japanese Evaluated Nuclear Data Library (JENDL 3.3) and found to closely follow those datasets. Use of the ( 3He, tf) reaction as a surrogate to extract ( n, f) cross sections in the 10-20 MeV equivalent neutron energy range is found to be suitable.

  7. Gene Expression Responses Linked to Reproduction Effect Concentrations (EC10,20,50,90) of Dimethoate, Atrazine and Carbendazim, in Enchytraeus albidus

    PubMed Central

    Novais, Sara C.; De Coen, Wim; Amorim, Mónica J. B.

    2012-01-01

    Background Molecular mechanisms of response to pesticides are scarce and information on such responses from soil invertebrates is almost inexistent. Enchytraeus albidus (Oligochaeta) is a standard soil ecotoxicology model species for which effects of many pesticides are known on survival, reproduction and avoidance behaviour. With the recent microarray development additional information can be retrieved on the molecular effects. Methodology/Principal Findings Experiments were performed to investigate the transcription responses of E. albidus when exposed to three pesticides – dimethoate (insecticide), atrazine (herbicide) and carbendazim (fungicide) – in a range of concentrations that inhibited reproduction by 10%, 20%, 50% and 90% (EC10, EC20, EC50 and EC90, respectively). The goal of this study was to further identify key biological processes affected by each compound and if dose-related. All three pesticides significantly affected biological processes like translation, regulation of the cell cycle or general response to stress. Intracellular signalling and microtubule-based movement were affected by dimethoate and carbendazim whereas atrazine affected lipid and steroid metabolism (also by dimethoate) or carbohydrate metabolism (also by carbendazim). Response to DNA damage/DNA repair was exclusively affected by carbendazim. Conclusions Changes in gene expression were significantly altered after 2 days of exposure in a dose-related manner. The mechanisms of response were comparable with the ones for mammals, suggesting across species conserved modes of action. The present results indicate the potential of using gene expression in risk assessment and the advantage as early markers. PMID:22558331

  8. Pharmacokinetics, Safety and Cognitive Function Profile of Rupatadine 10, 20 and 40 mg in Healthy Japanese Subjects: A Randomised Placebo-Controlled Trial

    PubMed Central

    Täubel, Jörg; Ferber, Georg; Fernandes, Sara; Lorch, Ulrike; Santamaría, Eva; Izquierdo, Iñaki

    2016-01-01

    Introduction Rupatadine is a marketed second generation antihistamine, with anti-PAF activity, indicated for symptomatic treatment of allergic rhinitis and urticaria. This study was conducted to evaluate the pharmacokinetics (PK), pharmacodynamics (PD), safety and tolerability of rupatadine in healthy Japanese subjects after single and multiple oral doses. Methods In this randomised, double-blind, placebo-controlled study, 27 male and female healthy Japanese subjects were administered single and multiple escalating rupatadine dose of 10, 20 and 40 mg or placebo. Blood samples were collected at different time points for PK measurements and subjects were assessed for safety and tolerability. The effect of rupatadine on cognitive functioning was evaluated by means of computerized cognitive tests: rapid visual information processing (RVP), reaction time (RT), spatial working memory (SWM) and visual analogue scales (VAS). Results Exposure to rupatadine as measured by Cmax and AUC was found to increase in a dose dependent manner over the dose range of 10–40 mg for both single and multiple dose administration. The safety assessments showed that all treatment related side effects were of mild intensity and there were no serious adverse events (SAEs) or withdrawals due to treatment–emergent adverse events (TEAEs) in this study. The therapeutic dose of rupatadine did not show any CNS impairment in any of the cognitive tests. Conclusions This study demonstrated that rupatadine is safe and well tolerated by Japanese healthy subjects. The PK-PD profile confirmed previous experience with rupatadine. PMID:27632557

  9. Development testing of the two-watt RTG heat source and Hastelloy-S/T-111 alloy compatibility studies

    SciTech Connect

    Howell, E.I.; Teaney, P.E.

    1993-09-29

    The two-watt radioisotope thermoelectric generator heat source capsules were tested to determine their survivability under extreme environmental conditions: high external pressure, high impact, and high internal pressure. Test results showed that the capsules could withstand external pressures of 1,000 bars and impacts at velocities near 150 meters per second. However, the results of the internal pressure tests (stress-rupture) were not so favorable, possibly because of copper contamination, leading to a recommendation for additional testing. A material compatibility study examined the use of Hastelloy-S as a material to clad the tantalum strength member of the two-watt radioisotopic heat source. Test capsules were subjected to high temperatures for various lengths of time, then cross sectioned and examined with a scanning electron microscope. Results of the study indicate that Hastelloy-S would be compatible with the underlying alloy, not only at the normal operating temperatures of the heat source, but also when exposed to the much higher temperatures of a credible accident scenario.

  10. Metallurgical examination of an AMTEC unit

    NASA Astrophysics Data System (ADS)

    Shields, V. B.; Kisor, A. K.; Fiebig, B.; Williams, R. M.; Ryan, M. A.; Homer, M. L.

    2001-02-01

    Two AMTEC units were operated for over 300 hours and then dissected and examined. The converter units were fabricated by Advanced Modular Power Systems, Inc. using a cold end condenser manufactured by Creare. Inc. and were constructed with a stainless steel housing and stainless steel sheathed molybdenum wick. Creare Unit 1 operated for 342 hours with condenser and BASE tube cell temperatures of 663 K and 1003 K respectively: the output power varied from an initial 68 mw to a final 25 mw. Operation of Creare Unit 1 was halted due to a low initial output current and power that remained unchanged. Creare Unit 2 ran for 575 hours with condenser and BASE tube cell temperatures of 543 K and 978 K respectively: the output power varied from an initial 2.6 watts to a final 1.8 watts. Operation of Creare Unit 2 was halted due to a low power output after the heater unit supplying heat failed and was replaced. The expected output power for both units was about 1 to 4 watts. Both units were subsequently disassembled and dissected to determine a failure mechanism and analyze the internal sodium distribution. Analysis showed that the internal sodium was primarily distributed near the condenser end of the converter units extending out to a distance of 3.2 cm. No significant amounts of sodium deposits were observed in the BASE tubes or plenum of either converter unit. The wick was sliced into 2 to 3 mm sections and analyzed using a SEM and X-ray florescence to determine its sodium distribution. The sodium distribution along the wick from the condenser to the base of the evaporator was observed to be continuous throughout. The analysis however could not determine how the sodium flow varied during operation. The low power output of Creare Unit 1 and the final low power output of Creare Unit 2 was tentatively determined to result from a fracture of the structural joint at the BASE tube braze seal on several of the tubes. .

  11. Task 5: TVA sediment-disturbing activities within the Watts Bar Reservoir and Melton Hill Reservoir areas of the Clinch River

    SciTech Connect

    1997-06-01

    The objectives of Task 5 of the Interagency Agreement No. DE-AI05-91OR22007 were to review: (1) the extent of dredging, construction, and other sediment-disturbing activities conducted by the Tennessee Valley Authority (TVA) in potentially contaminated areas of Watts Bar Reservoir, and (2) the disposition of the materials from these activities. This memorandum is the final report for Task 5. This memorandum describes major activities in the Watts Bar Reservoir and Melton Hill Reservoir areas of the Clinch River that possibly resulted in significant disturbance of potentially contaminated sediments. TVA records from the construction of Watts Bar Dam, Kingston Fossil Plant, and Melton Hill Dam were reviewed to facilitate qualitative description of the effect of these activities in disturbing potentially contaminated sediments. The critical period for these activities in disturbing contaminated sediments was during or after 1956 when the peak releases of radioactive contaminants occurred from the Oak Ridge Reservation.

  12. Environmental test report on the CTI-Cryogenics 1-watt integral Stirling cooler (long-life HD-1033d). Final report, 16 June-24 July 1988

    SciTech Connect

    Doggett, G.; Dunmire, H.; Samuels, R.; Shaffer, J.

    1989-04-01

    This final report describes and provides the data on the environmental testing of the CTI-Cryogenics 1-Watt Integral Stirling Cooler (Long-Life HD-1033D). The 1-Watt Integral Cooler (HD-1033B/C) is currently used in the M1 FLIR, M60 FLIR, and the Advanced Attack Helicopter FLIR. The long life cooler (clearance seal) improves life of the cooler by approximately two and one half times. C2NVEO evaluated the cooler performance at environmental extremes per the purchase description, PD-0182-001(CR). The cooler successfully passed all the environmental tests with no failures.

  13. Difference between the maximum empirical and field measured peak Watt values of thermal power system under highly sufficient solar conditions

    NASA Astrophysics Data System (ADS)

    Elhussain, O. A.; Abdel-Magid, T. I. M.

    2016-08-01

    Mono-Crystalline solar cell module is experimentally conducted in Khartoum, Sudan to study the difference between maximum empirical value of peak Watt and maximum value of thermal power produced in field under highly sufficient solar conditions. Field measurements are recorded for incident solar radiation, produced voltage, current and temperature at several time intervals during sun shine period. The thermal power system has been calculated using fundamental principles of heat transfer. The study shows that solar power for considered module could not attain the empirical peak power irrespective to maximum value of direct incident solar radiation and maximum temperature gained. A loss of about 6% of power can be considered as the difference between field measurements and the manufacturer's indicated empirical value. Solar cell exhibits 94% efficiency in comparison with manufacturer's provided data, and is 3'% more efficient in thermal energy production than in electrical power extraction for hot-dry climate conditions.

  14. Watt-level passively Q-switched heavily Er3+-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror

    PubMed Central

    Shen, Yanlong; Wang, Yishan; Luan, Kunpeng; Huang, Ke; Tao, Mengmeng; Chen, Hongwei; Yi, Aiping; Feng, Guobin; Si, Jinhai

    2016-01-01

    A diode-cladding pumped mid-infrared passively Q-switched Er3+-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 μJ, from which the maximum peak power was calculated to be 21.9 W. To the best of our knowledge, the average power and the peak power are the highest in 3 μm region passively Q-switched fiber lasers. The influence of gain fiber length on the operation regime of the fiber laser has been investigated in detail. PMID:27225029

  15. Simple, distance-dependent formulation of the Watts-Strogatz model for directed and undirected small-world networks

    NASA Astrophysics Data System (ADS)

    Song, H. Francis; Wang, Xiao-Jing

    2014-12-01

    Small-world networks—complex networks characterized by a combination of high clustering and short path lengths—are widely studied using the paradigmatic model of Watts and Strogatz (WS). Although the WS model is already quite minimal and intuitive, we describe an alternative formulation of the WS model in terms of a distance-dependent probability of connection that further simplifies, both practically and theoretically, the generation of directed and undirected WS-type small-world networks. In addition to highlighting an essential feature of the WS model that has previously been overlooked, namely the equivalence to a simple distance-dependent model, this alternative formulation makes it possible to derive exact expressions for quantities such as the degree and motif distributions and global clustering coefficient for both directed and undirected networks in terms of model parameters.

  16. Simple, distance-dependent formulation of the Watts-Strogatz model for directed and undirected small-world networks.

    PubMed

    Song, H Francis; Wang, Xiao-Jing

    2014-12-01

    Small-world networks-complex networks characterized by a combination of high clustering and short path lengths-are widely studied using the paradigmatic model of Watts and Strogatz (WS). Although the WS model is already quite minimal and intuitive, we describe an alternative formulation of the WS model in terms of a distance-dependent probability of connection that further simplifies, both practically and theoretically, the generation of directed and undirected WS-type small-world networks. In addition to highlighting an essential feature of the WS model that has previously been overlooked, namely the equivalence to a simple distance-dependent model, this alternative formulation makes it possible to derive exact expressions for quantities such as the degree and motif distributions and global clustering coefficient for both directed and undirected networks in terms of model parameters.

  17. Ecological risk assessment for residual coal fly ash at Watts Bar Reservoir, Tennessee: Site setting and problem formulation.

    PubMed

    Walls, Suzanne J; Jones, Daniel S; Stojak, Amber R; Carriker, Neil E

    2015-01-01

    A baseline ecological risk assessment (BERA) was performed for residual ash in the Watts Bar Reservoir following a release of fly ash from the Tennessee Valley Authority (TVA) Kingston Fossil Plant. The site consists of parts of 3 rivers in eastern Tennessee comprising over 32 river kilometers. The purpose of the assessment was to determine if residual ash negatively impacts maintenance and reproduction of balanced communities or populations of potentially exposed ecological receptor groups in these rivers. This introductory article summarizes the site and environmental setting, assessment and measurement endpoints, risk characterization methods, and the study approach. Subsequent articles describe ecological risks to fish, benthic invertebrates, aquatic- and riparian-feeding wildlife, and aerial-feeding insectivores; and the role ecological risk characterization played in determining the most effective management of the residual ash, setting project remediation objectives and targets, and designing long-term monitoring to measure the effectiveness of the selected removal action. PMID:25234753

  18. Watt-level passively Q-switched heavily Er(3+)-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror.

    PubMed

    Shen, Yanlong; Wang, Yishan; Luan, Kunpeng; Huang, Ke; Tao, Mengmeng; Chen, Hongwei; Yi, Aiping; Feng, Guobin; Si, Jinhai

    2016-01-01

    A diode-cladding pumped mid-infrared passively Q-switched Er(3+)-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 μJ, from which the maximum peak power was calculated to be 21.9 W. To the best of our knowledge, the average power and the peak power are the highest in 3 μm region passively Q-switched fiber lasers. The influence of gain fiber length on the operation regime of the fiber laser has been investigated in detail. PMID:27225029

  19. Watt-level passively Q-switched heavily Er3+-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror

    NASA Astrophysics Data System (ADS)

    Shen, Yanlong; Wang, Yishan; Luan, Kunpeng; Huang, Ke; Tao, Mengmeng; Chen, Hongwei; Yi, Aiping; Feng, Guobin; Si, Jinhai

    2016-05-01

    A diode-cladding pumped mid-infrared passively Q-switched Er3+-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 μJ, from which the maximum peak power was calculated to be 21.9 W. To the best of our knowledge, the average power and the peak power are the highest in 3 μm region passively Q-switched fiber lasers. The influence of gain fiber length on the operation regime of the fiber laser has been investigated in detail.

  20. Quantum cascade laser in a master oscillator power amplifier configuration with Watt-level optical output power.

    PubMed

    Hinkov, Borislav; Beck, Mattias; Gini, Emilio; Faist, Jérôme

    2013-08-12

    We present the design and realization of short-wavelength (λ = 4.53 μm) and buried-heterostructure quantum cascade lasers in a master oscillator power amplifier configuration. Watt-level, singlemode peak optical output power is demonstrated for typical non-tapered 4 μm wide and 5.25 mm long devices. Farfield measurements prove a symmetric, single transverse-mode emission in TM(00)-mode with typical divergences of 25° and 27° in and perpendicular to growth direction, respectively. We demonstrate singlemode tuning over a range of 7.9 cm(-1) for temperatures between 263K and 313K and also singlemode emission for different driving currents. The side mode suppression ratio is measured to be higher than 20 dB. PMID:23938833

  1. Brief Report: Repetitive Behaviors in Young Children with Autism Spectrum Disorder and Developmentally Similar Peers--A Follow Up to Watt et al. (2008)

    ERIC Educational Resources Information Center

    Barber, Angela B.; Wetherby, Amy M.; Chambers, Nola W.

    2012-01-01

    The present study extended the findings of Watt et al. (J Autism Dev Disord 38:1518-1533, 2008) by investigating repetitive and stereotyped behaviors (RSB) demonstrated by children (n = 50) and typical development (TD; n = 50) matched on developmental age, gender, and parents' education level. RSB were coded from videotaped Communication and…

  2. REMOVAL OF CHEMICAL AND MICROBIAL CONTAMINANTS IN DRINKING WATER - WATTS PREMIER M-2400 POINT-OF-ENTRY REVERSE OSMOSIS DRINKINGWATER TREATMENT SYSTEM

    EPA Science Inventory

    The Watts Premier M-2400 POE RO Drinking Water Treatment System was tested at the NSF Drinking Water Treatment Systems Laboratory for removal of the viruses fr and MS2, the bacteria Brevundimonas diminuta, and chemicals aldicarb, benzene, cadmium, carbofuran, cesium, chl...

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, REMOVAL OF ARSENIC IN DRINKING WATER: WATTS PREMIER M-SERIES M-15,000 REVERSE OSMOSIS TREATMENT SYSTEM

    EPA Science Inventory

    Verification testing of the Watts Premier M-Series M-15,000 RO Treatment System was conducted over a 31-day period from April 26, 2004, through May 26, 2004. This test was conducted at the Coachella Valley Water District (CVWD) Well 7802 in Thermal, California. The source water...

  4. Warts and All: Personal Reflections on Social Justice in Counseling Psychology. Reply to Kiselica, Palmer, Thompson and Shermis, and Watts. Rejoinder

    ERIC Educational Resources Information Center

    Goodman, Lisa A.; Liang, Belle; Weintraub, Sarah R.; Helms, Janet E.; Latta, Rachel E.

    2004-01-01

    In their comments regarding Goodman, Liang, Helms, Latta, Sparks, and Weintraub's article "Training Counseling Psychologists as Social Justice Agents: Feminist and Multicultural Principles in Action," Kiselica, Palmer, Thompson and Shermis, and Watts offered a number of useful suggestions for elaborating on social justice theory, practice, and…

  5. Watts nickel and rinse water recovery via an advanced reverse osmosis system

    SciTech Connect

    Schmidt, C.; White, I.E.; Ludwig, R.

    1993-08-01

    The report summarizes the results of an eight month test program conducted at the Hewlett Packard Printed Circuit Board Production Plant, Sunnyvale, CA (H.P.) to assess the effectiveness of an advanced reverse osmosis system (AROS). The AROS unit, manufactured by Water Technologies, Inc. (WTI) of Minneapolis, MN, incorporates membrane materials and system components designed to treat metal plating rinse water and produce two product streams; (1) a concentrated metal solution suitable for the plating bath, and (2) rinse water suitable for reuse as final rinse. Waste water discharge can be virtually eliminated and significant reductions realized in the need for new plating bath solution and rinse water.

  6. Influence of single administration of different diets on the energy metabolism at temperatures of 10,20 and 30 degrees C in the golden hamster.

    PubMed

    Simek, V

    1976-01-01

    Fed animals have a higher resting metabolic rate in the thermoneutral zone than fasting ones. The metabolic increase is due to the specific dynamic action of food. With a decline of environmental temperature this increase in metabolism either declines or remains unchanged; decisive is whether the heat is used for thermoregulation or not (Mejsnar and Janský 1971). The objective of our work was to find out to what extent a single intake of a diet with a different ratio of nutrients can influence resting metabolism in the golden hamster and whether this heat can be used for thermoregulation in the cold. Female golden hamsters aged 6-8 weeks kept at a constant temperature of 22 +/-1 degrees C with twelve-hour alternation of light (6 a.m. - 6 p.m.) and darkness ( 6 p.m. - 6 a.m.) were used for the experiments. The oxygen consumption was assessed after a single intake of a standard, high-carbohydrate (76 cal.% starch), high-fat (80 cal.% margarine) and high-protein (82 cal.% casein) diet-for detailed composition see Fábry (1959). The food was given at 6.m. after previous 20 hours of fasting. Animals were then transferred into the respiration chamber and kept there for three hours, including one hour when they were left to settle down; during this period the oxygen consumption was not measured. Oxygen consumption measurement started at 9 a.m. and lasted till 11 a.m. The metabolism of the animals at rest was assessed at temperatures of 10, 20 and 30 degrees C by measuring the oxygen consumption by the interferometric method (Wollschitt et al. 1935). The results are expressed in ml of oxygen per g of body weight per hour. The relationship between the metabolism at rest and environmental temperatures in hamsters given a single dose of standard, high-proetin, high-fat or high-carbohydrate diet is apparent from Table 1. The maximum increase of oxygen consumption after administration of the experimental diets was found at a temperature of 30 degrees C. At an environmental

  7. Summary report on water quality, sediment and water chemistry data for water and sediment samples collected from source areas to Melton Hill and Watts Bar reservoirs

    SciTech Connect

    Tomaszewski, T.M.; Bruggink, D.J.; Nunn, D.L.

    1995-08-01

    Contamination of surface water and sediments in the Clinch River and Watts Bar Reservoir (CR/WBR) system as a result of past and present activities by the US Department of Energy (DOE) on the Oak Ridge Reservation (ORR) and also activities by non-ORR facilities are being studied by the Clinch River Environmental Restoration Program (CR-ERP). Previous studies have documented the presence of heavy metals, organics, and radionuclides in the sediments of reservoirs in the vicinity. In support of the CR-ERP, during the summer of 1991, TVA collected and evaluated water and sediment samples from swimming areas and municipal water intakes on Watts Bar Reservoir, Melton Hill Reservoir (which is considered part of the Clinch River and Watts Bar Reservoir System), and Norris Reservoir, which was considered a source of less-contaminated reference or background data. Results of this study indicated that the levels of contamination in the samples from the Watts Bar and Melton Hill Reservoir sites did not pose a threat to human health. Despite the numerous studies, until the current work documented by this report, relatively few sediment or water samples had been collected by the CR-ERP in the immediate vicinity of contaminant point sources. This work focused on water and sediment samples taken from points immediately downstream from suspected effluent point sources both on and off the ORR. In August and September, 1994, TVA sampled surface water and sediment at twelve locations in Melton Hill and Watts Bar Reservoirs. Eleven of the sampling sites were selected based on existence of pollutant discharge permits, known locations of hazardous waste sites, and knowledge of past practices. The twelfth sample site was selected as a relatively less contaminated reference site for comparison purposes.

  8. Reproductive effects assessment of largemouth bass and bluegill in the Watts Bar Lake/Clinch River system

    SciTech Connect

    Niemela, S.L.; McCracken, M.K.; Ivey, L.J.; Greeley, M.S. Jr.

    1995-12-31

    Successful reproduction is key to the survival and maintenance of viable fish populations and therefore an important consideration in ecological risk assessments. In order to evaluate the reproductive health of fish in the Watts Bar Lake/Clinch River system downstream of the Department of Energy facilities in Oak Ridge, TN, largemouth bass (Micropterus salmoides) and bluegill sunfish (Lepomis macrochirus) were collected from seven sites at the beginning of the spawning period and a suite of parameters indicative of reproductive condition were measured. Measures of reproductive condition common to male and female fish included gonadal somatic index (GSI), and plasma concentrations of reproductive hormones. Gender specific analyses included a histological examination of the testes in males and a quantitative evaluation of ovarian parameters in females including determinations of fecundity, the number of vitellogenic and atretic oocytes, and the incidences of ovarian parasites. Evidence of reproductive impairment in largemouth bass at the two sites immediately adjacent to the Oak Ridge Reservation included lower GSIs and reproductive hormone levels (males and females), and reduced fecundity and an increase in the number of atretic oocytes (females). Similar trends were not observed in bluegill sunfish. These findings suggest that reproduction in a top-level predatory fish species, the largemouth bass, may be negatively affected by activities on the Oak Ridge Reservation.

  9. Transport and accumulation of cesium-137 and mercury in the Clinch River and Watts Bar Reservoir system. Environmental Restoration Program

    SciTech Connect

    Olsen, C.R.; Larsen, I.L.; Lowry, P.D.; Moriones, C.R.; Ford, C.J.; Dearstone, K.C.; Turner, R.R.; Kimmel, B.L.; Brandt, C.C.

    1992-06-01

    Operations and waste disposal activities at the Oak Ridge Y-12 Plant, the Oak Ridge National Laboratory (ORNL), and the Oak Ridge K-25 Site (formerly the Oak Ridge Gaseous Diffusion Plant) on the US Department of Energy (DOE) Oak Ridge Reservation (ORR) have introduced a variety of airborne, liquid, and solid wastes into the surrounding environment. Some of these wastes may affect off-site areas by entering local streams, which ultimately drain into the Clinch and Tennessee river system. Previously reported concentrations of radionuclides, metals and organic compounds in water, sediment, and biota of the Clinch River and Watts Bar Reservoir suggest the presence of a variety of contaminants of possible concern to the protection of human health and the environment. The work reported here represents part of the initial scoping phase for the Clinch River RCRA Facility Investigation. In this work, the distribution of {sup 137}Cs is used to identify contaminant accumulation patterns and potential problem, or ``hot-spot,`` areas with regard to environmental hazard or human health. Radiocesium was chosen for this scoping effort because (1) its history of release into the Clinch River is reasonably well documented, (2) it is easy and inexpensive to measure by gamma spectrometry, and (3) it is rapidly sorbed to particulate matter and thus serves as a cost-effective tracer for identifying the transport and accumulation patterns of many other particle-reactive contaminants, such as mercury (Hg), lead (Pb), and plutonium (Pu), and polychlorinated biphenyls (PCBs).

  10. Transport and accumulation of cesium-137 and mercury in the Clinch River and Watts Bar Reservoir system

    SciTech Connect

    Olsen, C.R.; Larsen, I.L.; Lowry, P.D.; Moriones, C.R.; Ford, C.J.; Dearstone, K.C.; Turner, R.R.; Kimmel, B.L.; Brandt, C.C.

    1992-06-01

    Operations and waste disposal activities at the Oak Ridge Y-12 Plant, the Oak Ridge National Laboratory (ORNL), and the Oak Ridge K-25 Site (formerly the Oak Ridge Gaseous Diffusion Plant) on the US Department of Energy (DOE) Oak Ridge Reservation (ORR) have introduced a variety of airborne, liquid, and solid wastes into the surrounding environment. Some of these wastes may affect off-site areas by entering local streams, which ultimately drain into the Clinch and Tennessee river system. Previously reported concentrations of radionuclides, metals and organic compounds in water, sediment, and biota of the Clinch River and Watts Bar Reservoir suggest the presence of a variety of contaminants of possible concern to the protection of human health and the environment. The work reported here represents part of the initial scoping phase for the Clinch River RCRA Facility Investigation. In this work, the distribution of {sup 137}Cs is used to identify contaminant accumulation patterns and potential problem, or hot-spot,'' areas with regard to environmental hazard or human health. Radiocesium was chosen for this scoping effort because (1) its history of release into the Clinch River is reasonably well documented, (2) it is easy and inexpensive to measure by gamma spectrometry, and (3) it is rapidly sorbed to particulate matter and thus serves as a cost-effective tracer for identifying the transport and accumulation patterns of many other particle-reactive contaminants, such as mercury (Hg), lead (Pb), and plutonium (Pu), and polychlorinated biphenyls (PCBs).

  11. Periodic coupling strength-dependent multiple coherence resonance by time delay in Newman-Watts neuronal networks.

    PubMed

    Wu, Yanan; Gong, Yubing; Xu, Bo

    2013-12-01

    Recently, multiple coherence resonance induced by time delay has been observed in neuronal networks with constant coupling strength. In this paper, by employing Newman-Watts Hodgkin-Huxley neuron networks with time-periodic coupling strength, we study how the temporal coherence of spiking behavior and coherence resonance by time delay change when the frequency of periodic coupling strength is varied. It is found that delay induced coherence resonance is dependent on periodic coupling strength and increases when the frequency of periodic coupling strength increases. Periodic coupling strength can also induce multiple coherence resonance, and the coherence resonance occurs when the frequency of periodic coupling strength is approximately multiple of the spiking frequency. These results show that for periodic coupling strength time delay can more frequently optimize the temporal coherence of spiking activity, and periodic coupling strength can repetitively optimize the temporal coherence of spiking activity as well. Frequency locking may be the mechanism for multiple coherence resonance induced by periodic coupling strength. These findings imply that periodic coupling strength is more efficient for enhancing the temporal coherence of spiking activity of neuronal networks, and thus it could play a more important role in improving the time precision of information processing and transmission in neural networks.

  12. Sub-hundred Watt operation demonstration of HVM LPP-EUV source

    NASA Astrophysics Data System (ADS)

    Mizoguchi, Hakaru; Nakarai, Hiroaki; Abe, Tamotsu; Ohta, Takeshi; Nowak, Krzysztof M.; Kawasuji, Yasufumi; Tanaka, Hiroshi; Watanabe, Yukio; Hori, Tsukasa; Kodama, Takeshi; Shiraishi, Yutaka; Yanagida, Tatsuya; Yamada, Tsuyoshi; Yamazaki, Taku; Okazaki, Shinji; Saitou, Takashi

    2014-04-01

    light source unit is 2015.

  13. Lipid-altering efficacy of switching from atorvastatin 10 mg/day to ezetimibe/simvastatin 10/20 mg/day compared to doubling the dose of atorvastatin in hypercholesterolaemic patients with atherosclerosis or coronary heart disease.

    PubMed

    Barrios, V; Amabile, N; Paganelli, F; Chen, J-W; Allen, C; Johnson-Levonas, A O; Massaad, R; Vandormael, K

    2005-12-01

    This randomised, double-blind study evaluated the efficacy and safety of ezetimibe/simvastatin (EZE/SIMVA) 10/20 mg tablet compared to doubling the atorvastatin (ATV) dose in hypercholesterolaemic patients with atherosclerotic or coronary heart disease (CHD). The study group included 435 male and female CHD patients (aged >or=18 years) who had not achieved their low-density lipoprotein cholesterol (LDL-C) goal of <2.50 mmol/l while on a stable dose of ATV 10 mg for >or=6 weeks. After a 1-week diet/stabilisation period, patients with LDL-C >or=2.50 mmol/l and 10/20 mg/day (n = 221) or ATV 20 mg/day (n = 214) for 6 weeks. The primary efficacy objective was to determine the per cent reduction from baseline in LDL-C at week 6. EZE/SIMVA 10/20 mg produced significantly greater mean per cent changes from baseline in LDL-C compared with ATV 20 mg (-32.8 vs. -20.3%; p 10/20 mg for 6 weeks (p < 0.05 for all parameters). EZE/SIMVA 10/20 mg was generally well tolerated, with an overall safety profile similar to that of ATV 20 mg. EZE/SIMVA 10/20 mg produced superior lipid-altering efficacy by dual inhibition of cholesterol synthesis and intestinal absorption compared with doubling the dose of ATV from 10 to 20 mg.

  14. Australian Marsh Beetles (Coleoptera: Scirtidae). 8. The new genera
    Cygnocyphon, Eximiocyphon, Paracyphon, Leptocyphon, Tectocyphon,
    and additions to Contacyphon de Gozis, Nanocyphon Zwick and Eurycyphon Watts.

    PubMed

    Zwick, Peter

    2015-07-07

    New monotypic genera proposed are: Cygnocyphon ibex n. gen., n. sp., Eximiocyphon excisus n. gen., n. sp., and Paracyphon avicularis n. gen., n. sp. Also proposed are the new genera Leptocyphon n. gen., with L. furcalonga, n. sp. and L. quadricornutus, n. sp., Tectocyphon n. gen., with T. microphallus n. sp., T. hirsutus n. sp., and T. victoriae n. sp. The diagnosis of genus Eurycyphon Watts is amended, E. fulvus Watts and E. aquilus Watts are partly redescribed. New species are: Eurycyphon barringtoni n. sp., E. castaneus n. sp., E. falcatus n. sp., E. parvus n. sp., E. perlatus n. sp., E. thunguttii, n. sp., E. tomweiri n. sp., and E. tricornis n. sp. Species of Nanocyphon are discussed and N. tasmanicus n. sp. is described. Contacyphon forcipatus n. sp. is described and an apparently introduced population of the European Contacyphon putonii Gozis is reported from West Australia. For comparison with some of the new taxa the redescription of Pseudomicrocara orientalis Armstrong, type species of the genus, is supplemented.

  15. Report on water quality, sediment and water chemistry data for water and sediment samples collected from source areas to Melton Hill and Watts Bar reservoirs

    SciTech Connect

    Tomaszewski, T.M.; Bruggink, D.J.; Nunn, D.L.

    1995-08-18

    Contamination of surface water and sediments in the Clinch River and Watts Bar Reservoir (CR/WBR) system as a result of past and present activities by the US Department of Energy (DOE) on the Oak Ridge Reservation (ORR) and also activities by non-ORR facilities are being studied by the Clinch River Environmental Restoration Program (CR-ERP). Previous studies have documented the presence of heavy metals, organics, and radionuclides in the sediments of reservoirs in the vicinity. In support of the CR-ERP, during the summer of 1991, TVA collected and evaluated water and sediment samples from swimming areas and municipal water intakes on Watts Bar Reservoir, Melton Hill Reservoir and Norris Reservoir, which was considered a source of less-contaminated reference or background data. Despite the numerous studies, until the current work documented by this report, relatively few sediment or water samples had been collected by the CR-ERP in the immediate vicinity of contaminant point sources. This work focused on water and sediment samples taken from points immediately downstream from suspected effluent point sources both on and off the ORR. In August and September, 1994, TVA sampled surface water and sediment at twelve locations in melton Hill and Watts Bar Reservoirs.

  16. Assessment of potential impact of the Clinch River Breeder Reactor Plant thermal effluent on the Watts Bar Reservoir striped bass population

    SciTech Connect

    Heuer, J H; McIntosh, D; Ostrowski, P; Tomljanovich, D A

    1983-11-01

    This report is an assessment of potential adverse impact to striped bass (Morone saxatilis) in Watts Bar Reservoir caused by thermal effluent from operation of the Clinch River Breeder Reactor Plant (CRBRP). The Clinch River arm of Watts Bar Reservoir is occupied by adult striped bass during the warmest months of the year. Concern was raised that operation of the CRBRP, specifically thermal discharges, could conflict with management of striped bass. In all cases examined the thermal plume becomes nearly imperceptible within a short distance from the discharge pipe (about 30 ft (10 m)) compared to river width (about 630 ft (190 m)). Under worst case conditions any presence of the plume in the main channel (opposite side of the river from the discharge) will be confined to the surface layer of the water. An ample portion of river cross sections containing ambient temperature water for passage or residence of adult striped bass will always be available in the vicinity of this thermal effluent. Although a small portion of river cross section would exceed the thermal tolerance of striped bass, the fish would naturally avoid this area and seek out adjacent cooler water. Therefore, it is concluded the CRBRP thermal effluent will not significantly affect the integrity of the striped bass thermal refuge in the Clinch River arm of Watts Bar Reservoir. At this time there is no need to consider alternative diffuser designs and thermal modeling. 8 references, 3 figures, 2 tables.

  17. Results of sediment and water sampling and inorganic, organic, and radionuclide analysis at recreation areas and water intakes - Norris, Melton Hill, and Watts Bar Lakes - Data report

    SciTech Connect

    1991-10-01

    Suspected water quality contamination in Watts Bar Reservoir as a result of activities in past decades at the Department of Energy`s (DOE) Oak Ridge facility is of public concern. DOE, the Tennessee Valley Authority (TVA), the State of Tennessee, and other agencies and officials have received many inquiries from the public in recent years concerning this suspected pollution, especially how this potential contamination may affect the health and safety of those persons who use beaches in the area for swimming or other water-body-contact sports. As a result of these concerns, TVA conducted a study in May and June 1991 to obtain data on potential contaminants of concern in the water and sediment of Watts Bar Reservoir. TVA collected water and sediment samples at a total of 29 sites, including 18 recreation areas and 11 water intake locations, located throughout Norris, Melton Hill, and Watts Bar Reservoirs. The samples were analyzed for radionuclides, metals, and organic compounds which could pose a threat to human health.

  18. Results of sediment and water sampling for inorganic, organic, and radionuclide analysis at recreation areas and water intakes -- Norris, Melton Hill, and Watts Bar Lakes. Data report

    SciTech Connect

    1991-10-01

    Suspected water quality contamination in Watts Bar Reservoir as a result of activities in past decades at the Department of Energy`s (DOE) Oak Ridge facility is of public concern. DOE, the Tennessee Valley Authority (TVA), the State of Tennessee, and other agencies and officials have received many inquiries from the public in recent years concerning this suspected pollution, especially how this potential contamination may affect the health and safety of those persons who use beaches in the area for swimming or other water-body-contact sports. As a result of these concerns, TVA conducted a study in May and June 1991 to obtain data on potential contaminants of concern in the water and sediment of Watts Bar Reservoir. TVA collected water and sediment samples at a total of 29 sites, including 18 recreation areas and 11 water intake locations, located throughout Norris, Melton Hill, and Watts Bar Reservoirs. The samples were analyzed for radionuclides, metals, and organic compounds which could pose a threat to human health.

  19. Search for the astrophysical sources of the Fly's Eye event with the highest to date cosmic ray energy E=3.2\\cdot10^{20} eV

    NASA Astrophysics Data System (ADS)

    Gnatyk, R. B.; Kudrya, Yu. N.; Zhdanov, V. I.

    2016-09-01

    Among the registered extremely high energy cosmic rays (EHECR, E>10^{20} eV) an event with the highest to date energy of E=3.2\\cdot10^{20} eV was detected by the Fly's Eye experiment (FE event) in 1991. With the use of the back-tracking method for the calculation of the EHECR trajectories in Galactic and extragalactic magnetic fields, we show that the galaxies UGC 03574 and UGC 03394 are the most promising candidates among the nearby extragalactic sources for the cases of iron and C-N-O group primary nucleus respectively. The most likely accelerating mechanisms are the newly-born millisecond pulsars, magnetar flares and tidal disruption events in these galaxies.

  20. 7 CFR 3300.64 - Application for certificate for new equipment produced or assembled in the United States or in a...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... case of a unit of equipment (i.e., the insulated body with its mechanical refrigerating appliance... insulated body have been tested separately: (1) For the reference mechanical refrigerating appliance: (i... refrigerating capacity, W, in watts, of the appliance at an outside temperature of +30 °C and the...

  1. Interstellar extinction at 10-20 microns

    NASA Technical Reports Server (NTRS)

    Simpson, Janet P.; Rubin, Robert H.

    1989-01-01

    The IRAS low-resolution spectra (LRS) spectra of 117 stars of excellent signal/noise with optically thin silicate dust shells were analyzed. The stellar continua (assumed to be a cool black body) were subtracted, and the resulting dust shell spectra were fit with simple models F(sub lambda) assuming uniform mass loss and dust temperature as a function of distance from the star, calculated using the optical constants for silcates of Draine (1985). From the comparison of the spectra and the models, functions for the emissivity, kappa(sub lambda), were derived.

  2. On-chip power-combining techniques for watt-level linear power amplifiers in 0.18 μm CMOS

    NASA Astrophysics Data System (ADS)

    Zhixiong, Ren; Kefeng, Zhang; Lanqi, Liu; Cong, Li; Xiaofei, Chen; Dongsheng, Liu; Zhenglin, Liu; Xuecheng, Zou

    2015-09-01

    Three linear CMOS power amplifiers (PAs) with high output power (more than watt-level output power) for high data-rate mobile applications are introduced. To realize watt-level output power, there are two 2.4 GHz PAs using an on-chip parallel combining transformer (PCT) and one 1.95 GHz PA using an on-chip series combining transformer (SCT) to combine output signals of multiple power stages. Furthermore, some linearization techniques including adaptive bias, diode linearizer, multi-gated transistors (MGTR) and the second harmonic control are applied in these PAs. Using the proposed power combiner, these three PAs are designed and fabricated in TSMC 0.18 μm RFCMOS process. According to the measurement results, the proposed two linear 2.4 GHz PAs achieve a gain of 33.2 dB and 34.3 dB, a maximum output power of 30.7 dBm and 29.4 dBm, with 29% and 31.3% of peak PAE, respectively. According to the simulation results, the presented linear 1.95 GHz PA achieves a gain of 37.5 dB, a maximum output power of 34.3 dBm with 36.3% of peak PAE. Project supported by the National Natural Science Foundation of China (No. 61076030).

  3. "Watts per person" paradigm to design net zero energy buildings: Examining technology interventions and integrating occupant feedback to reduce plug loads in a commercial building

    NASA Astrophysics Data System (ADS)

    Yagi Kim, Mika

    As building envelopes have improved due to more restrictive energy codes, internal loads have increased largely due to the proliferation of computers, electronics, appliances, imaging and audio visual equipment that continues to grow in commercial buildings. As the dependency on the internet for information and data transfer increases, the electricity demand will pose a challenge to design and operate Net Zero Energy Buildings (NZEBs). Plug Loads (PLs) as a proportion of the building load has become the largest non-regulated building energy load and represents the third highest electricity end-use in California's commercial office buildings, accounting for 23% of the total building electricity consumption (Ecova 2011,2). In the Annual Energy Outlook 2008 (AEO2008), prepared by the Energy Information Administration (EIA) that presents long-term projections of energy supply and demand through 2030 states that office equipment and personal computers are the "fastest growing electrical end uses" in the commercial sector. This thesis entitled "Watts Per Person" Paradigm to Design Net Zero Energy Buildings, measures the implementation of advanced controls and behavioral interventions to study the reduction of PL energy use in the commercial sector. By integrating real world data extracted from an energy efficient commercial building of its energy use, the results produce a new methodology on estimating PL energy use by calculating based on "Watts Per Person" and analyzes computational simulation methods to design NZEBs.

  4. Powering a Home with Just 25 Watts of Solar PV. Super-Efficient Appliances Can Enable Expanded Off-Grid Energy Service Using Small Solar Power Systems

    SciTech Connect

    Phadke, Amol A.; Jacobson, Arne; Park, Won Young; Lee, Ga Rick; Alstone, Peter; Khare, Amit

    2015-04-01

    Highly efficient direct current (DC) appliances have the potential to dramatically increase the affordability of off-grid solar power systems used for rural electrification in developing countries by reducing the size of the systems required. For example, the combined power requirement of a highly efficient color TV, four DC light emitting diode (LED) lamps, a mobile phone charger, and a radio is approximately 18 watts and can be supported by a small solar power system (at 27 watts peak, Wp). Price declines and efficiency advances in LED technology are already enabling rapidly increased use of small off-grid lighting systems in Africa and Asia. Similar progress is also possible for larger household-scale solar home systems that power appliances such as lights, TVs, fans, radios, and mobile phones. When super-efficient appliances are used, the total cost of solar home systems and their associated appliances can be reduced by as much as 50%. The results vary according to the appliances used with the system. These findings have critical relevance for efforts to provide modern energy services to the 1.2 billion people worldwide without access to the electrical grid and one billion more with unreliable access. However, policy and market support are needed to realize rapid adoption of super-efficient appliances.

  5. Melting and freezing behaviors of prototype ionic liquids, 1-butyl-3-methylimidazolium bromide and its chloride, studied by using a nano-Watt differential scanning calorimeter.

    PubMed

    Nishikawa, Keiko; Wang, Shaolan; Katayanagi, Hideki; Hayashi, Satoshi; Hamaguchi, Hiro-o; Koga, Yoshikata; Tozaki, Ken-ichi

    2007-05-10

    1-Butyl-3-methylimidazolium bromide ([bmim]Br) and its chloride ([bmim]Cl) are representative prototypes of ionic liquids. We investigated the melting and freezing behaviors of [bmim]Br and [bmim]Cl by using a homemade differential scanning calorimeter (DSC) with nano-Watt stability and sensitivity. The measurements were carried out at heating and cooling rates slow enough to mimic quasi-static processes. Their thermal behaviors of melting and freezing show characteristic features such as a wide pre-melting range and excessive supercooling and individual behaviors of single crystals even for the same substance. The melting temperatures of [bmim]Br and [bmim]Cl were determined from the broad DSC traces and discussed in relation to the crystal structure. We suggest that the observed characteristics are due to the dynamics of the cooperative change between gauche-trans (GT) and trans-trans (TT) conformations of the butyl group in the [bmim]+ cation.

  6. Type-II vertical-external-cavity surface-emitting laser with Watt level output powers at 1.2 μm

    NASA Astrophysics Data System (ADS)

    Möller, C.; Fuchs, C.; Berger, C.; Ruiz Perez, A.; Koch, M.; Hader, J.; Moloney, J. V.; Koch, S. W.; Stolz, W.

    2016-02-01

    Semiconductor laser characteristics based on type-II band-aligned quantum well heterostructures for the emission at 1.2 μm are presented. Ten "W"-quantum wells consisting of GaAs/(GaIn)As/Ga(AsSb)/(GaIn)As/GaAs are arranged as resonant periodic gain in a vertical-external-cavity surface-emitting laser. Its structure is analyzed by X-ray diffraction, photoluminescence, and reflectance measurements. The laser's power curves and spectra are investigated. Output powers at Watt level are achieved, with a maximum output power of 4 W. It is confirmed that laser operation only involves the type-II transition. A blue shift of the material gain is observed while the modal gain exhibits a red shift.

  7. One-Watt level mid-IR output, singly resonant, continuous-wave optical parametric oscillator pumped by a monolithic diode laser.

    PubMed

    Nieuwenhuis, Ab F; Lee, Chris J; Sumpf, Bernd; van der Slot, Peter J M; Erbert, Götz; Boller, Klaus-J

    2010-05-24

    We report more than 1.1 Watt of idler power at 3373 nm in a singly resonant optical parametric oscillator (SRO), directly pumped by a single-frequency monolithic tapered diode laser. The SRO is based on a periodically poled MgO:LiNbO3 crystal in a four mirror cavity and is excited by 8.05 W of 1062 nm radiation. The SRO pump power at threshold is 4 W. The internal slope-efficiency and conversion efficiency reach 89% and 44% respectively. The signal and idler waves are temperature tuned in the range of 1541 to 1600 nm and 3154 to 3415 nm respectively. To the best of our knowledge, this is the highest output obtained for a diode pumped optical parametric oscillator (OPO), and the first time a SRO is directly pumped by a monolithic tapered diode laser. PMID:20588971

  8. Watts-level super-compact narrow-linewidth Tm-doped silica all-fiber laser near 1707 nm with fiber Bragg gratings

    NASA Astrophysics Data System (ADS)

    Xiao, X. S.; Guo, H. T.; Lu, M.; Yan, Z. J.; Wang, H. S.; Wang, Y. S.; Xu, Y. T.; Gao, C. X.; Cui, X. X.; Guo, Q.; Peng, B.

    2016-11-01

    Watts-level ultra-short wavelength operation of a Tm-doped all fiber laser was developed by using a 1550 nm Er-doped fiber laser pump source and a pair of fiber Bragg gratings (FBGs). The laser yielded 1.28 W of continuous-wave output at 1707.01 nm with a narrow linewidth of ~44 pm by means of a 20 cm Tm-doped fiber. The dependencies of the slope efficiencies and pump threshold of the Tm-doped fiber laser versus the length of active fiber and reflectivity of the output mirror (FBG) were investigated in detail, in which the maximum average slope efficiency was 36.1%. There is no doubt that this all fiber laser will be a perfect pump source for mid-IR laser output.

  9. Light Weight Radioisotope Heater Unit (LWRHU) production for the Galileo mission

    NASA Astrophysics Data System (ADS)

    Rinehart, Gary H.

    The Light Weight Radioisotope Heater Unit (LWRHU) is a (Pu-238)O2-fueled heat source designed to provide a thermal watt of power for space missions. The LWRHU will be used to maintain the temperature of various components on the spacecraft at the required level. The heat source consists of a (Pu-238)O2-fuel pellet, a Pt-30 pct Rh capsule, a pyrolytic graphite insulator, and a woven graphite aeroshell assembly. Los Alamos National Laboratory has fabricated 134 heater units which will be used on the Galileo mission.

  10. Concerning Units.

    ERIC Educational Resources Information Center

    Wadlinger, Robert L.

    1983-01-01

    SI units come in two distinct types: fundamental (kilogram, meter) and descriptive (atom, molecule). Proper/improper uses of atom/molecule from historical cases are presented followed by a re-introduction of a light "wave (cycle)" unit and the clearly defined photon model which is deduced. Also examines omission of the fundamental unit "radon."…

  11. Thermal Performance of ATLAS Laser Thermal Control System Demonstration Unit

    NASA Technical Reports Server (NTRS)

    Ku, Jentung; Robinson, Franklin; Patel, Deepak; Ottenstein, Laura

    2013-01-01

    than 135 watts of heater power. 4) The LHP reservoir control heater power is limited to 15 watts with a 70 percent duty cycle. 5) The voltage of the power supply can vary between 26 volts direct current and 34 volts direct current during the spacecraft lifetime. A design analysis shows that a single LTCS can satisfy these requirements. However, shutdown of· the LHP is particularly challenging and the shutdown heater must be wired in series with two reservoir thermostats and two CCHP thermostats at different set points. An LTCS demonstration unit has been tested to verify these performance characteristics experimentally prior to proceeding to the final LTCS design and fabrication. Test results showed that the LHP shutdown scheme would be able to shut down the LHP as designed and the reservoir control heater can maintain the ATLAS mass simulator within the plus or minus 1 degrees Centigrade accuracy under various combinations of the heat load, sink temperature, and power supply voltage.

  12. Fabrication of light weight radioisotope heater unit hardware components

    NASA Astrophysics Data System (ADS)

    McNeil, Dennis C.

    1996-03-01

    The Light Weight Radioisotope Heater Unit (LWRHU) is planned to be used on the National Aeronautics and Space Administration (NASA) Cassini Mission, to provide localized thermal energy as strategic locations on the spacecraft. These one watt heater units will support the operation of many on-board instruments that require a specific temperature range to function properly. The system incorporates a fuel pellet encapsulated in a vented metallic clad fabricated from platinum-30% rhodium (Pt-30%Rh) tubing, sheet and foil materials. To complete the package, the clad assemblies are placed inside a combination of graphite components. This report describes the techniques employed by Mound related to the fabrication and sub assembly processes of the LWRHU clad hardware components. Included are details concerning configuration control systems, material procurement and certification, hardware fabrication specifics, and special processes that are utilized.

  13. Light weight radioisotope heater unit (LWRHU): a technical description of the reference design

    SciTech Connect

    Tate, R.E.

    1982-01-01

    The Light Weight Radioisotope Heater Unit (LWRHU), a new radioisotope heater unit for use in space missions, is a /sup 238/PuO/sub 2/-fueled unit designed to provide a thermal watt in dispersed locations on a spacecraft. The LWRHU is required to maintain the temperature of a component at a level where the component will function reliably in space. Two major constraints are placed on the unit's design; it must be as light as possible and must provide enough protection to immobilize the plutonium fuel to the maximum extent in all phases of the unit's lifetime. The four components are pelletized fuel, platinum-alloy encapsulation, pyrolytic graphite thermal insulation, and high-technology graphite ablation shell. The LWRHU is a cylinder 32 mm (1.26 in.) high and 26 mm (1.02 in.) in diameter. It weighs slightly less than 40 g(.09 lb).

  14. Unit Cells

    ERIC Educational Resources Information Center

    Olsen, Robert C.; Tobiason, Fred L.

    1975-01-01

    Describes the construction of unit cells using clear plastic cubes which can be disassembled, and one inch cork balls of various colors, which can be cut in halves, quarters, or eighths, and glued on the inside face of the cube, thus simulating a unit cell. (MLH)

  15. UNIT, PETROLOGY.

    ERIC Educational Resources Information Center

    Louisiana Arts and Science Center, Baton Rouge.

    THIS TEACHER'S GUIDE FOR A UNIT ON PETROLOGY IS SUITABLE FOR ADAPTATION AT EITHER THE UPPER ELEMENTARY OR THE JUNIOR HIGH SCHOOL LEVELS. THE UNIT BEGINS WITH A STORY THAT INTRODUCES VOLCANIC ACTION AND IGNEOUS ROCK FORMATION. SELECTED CONCEPTS ARE LISTED FOLLOWED BY SUGGESTED ACTIVITIES. A BIBLIOGRAPHY, FILM LIST, VOCABULARY LIST, AND QUESTION AND…

  16. UNIT, ALASKA.

    ERIC Educational Resources Information Center

    Louisiana Arts and Science Center, Baton Rouge.

    THE UNIT DESCRIBED IN THIS BOOKLET DEALS WITH THE GEOGRAPHY OF ALASKA. THE UNIT IS PRESENTED IN OUTLINE FORM. THE FIRST SECTION DEALS PRINCIPALLY WITH THE PHYSICAL GEOGRAPHY OF ALASKA. DISCUSSED ARE (1) THE SIZE, (2) THE MAJOR LAND REGIONS, (3) THE MOUNTAINS, VOLCANOES, GLACIERS, AND RIVERS, (4) THE NATURAL RESOURCES, AND (5) THE CLIMATE. THE…

  17. Suppression of spurious mode oscillation in mega-watt 77-GHz gyrotron as a high quality probe beam source for the collective Thomson scattering in LHD

    SciTech Connect

    Ogasawara, S.; Kubo, S.; Nishiura, M.; Tanaka, K.; Shimozuma, T.; Yoshimura, Y.; Igami, H.; Takahashi, H.; Ito, S.; Takita, Y.; Kobayashi, S.; Mizuno, Y.; Okada, K.; Tatematsu, Y.; Saito, T.; Minami, R.; Kariya, T.; Imai, T.

    2012-10-15

    Collective Thomson scattering (CTS) diagnostic requires a strong probing beam to diagnose a bulk and fast ion distribution function in fusion plasmas. A mega-watt gyrotron for electron cyclotron resonance heating is used as a probing beam in the large helical device. Spurious mode oscillations are often observed during the turning on/off phase of the modulation. The frequency spectra of the 77-GHz gyrotron output power have been measured, and then one of the spurious modes, which interferes with the CTS receiver system, is identified as the TE{sub 17,6} mode at the frequency of 74.7 GHz. The mode competition calculation indicates that the increase of the magnetic field strength at the gyrotron resonator can avoid such a spurious mode and excite only the main TE{sub 18,6} mode. The spurious radiation at the 74.7 GHz is experimentally demonstrated to be suppressed in the stronger magnetic field than that optimized for the high-power operation.

  18. Suppression of spurious mode oscillation in mega-watt 77-GHz gyrotron as a high quality probe beam source for the collective Thomson scattering in LHD.

    PubMed

    Ogasawara, S; Kubo, S; Nishiura, M; Tatematsu, Y; Saito, T; Tanaka, K; Shimozuma, T; Yoshimura, Y; Igami, H; Takahashi, H; Ito, S; Takita, Y; Kobayashi, S; Mizuno, Y; Okada, K; Minami, R; Kariya, T; Imai, T

    2012-10-01

    Collective Thomson scattering (CTS) diagnostic requires a strong probing beam to diagnose a bulk and fast ion distribution function in fusion plasmas. A mega-watt gyrotron for electron cyclotron resonance heating is used as a probing beam in the large helical device. Spurious mode oscillations are often observed during the turning on/off phase of the modulation. The frequency spectra of the 77-GHz gyrotron output power have been measured, and then one of the spurious modes, which interferes with the CTS receiver system, is identified as the TE(17,6) mode at the frequency of 74.7 GHz. The mode competition calculation indicates that the increase of the magnetic field strength at the gyrotron resonator can avoid such a spurious mode and excite only the main TE(18,6) mode. The spurious radiation at the 74.7 GHz is experimentally demonstrated to be suppressed in the stronger magnetic field than that optimized for the high-power operation.

  19. Ultra-compact Watt-level flat supercontinuum source pumped by noise-like pulse from an all-fiber oscillator.

    PubMed

    Chen, He; Zhou, Xuanfeng; Chen, Sheng-Ping; Jiang, Zong-Fu; Hou, Jing

    2015-12-28

    We demonstrate Watt-level flat visible supercontinuum (SC) generation in photonic crystal fibers, which is directly pumped by broadband noise-like pulses from an Yb-doped all-fiber oscillator. The novel SC generator is featured with elegant all-fiber-integrated architecture, high spectral flatness and high efficiency. Wide optical spectrum spanning from 500 nm to 2300 nm with 1.02 W optical power is obtained under the pump of 1.4 W noise-like pulse. The flatness of the spectrum in the range of 700 nm~1600 nm is less than 5 dB (including the pump residue). The exceptional simplicity, economical efficiency and the comparable performances make the noise-like pulse oscillator a competitive candidate to the widely used cascade amplified coherent pulse as the pump source of broadband SC. To the best of our knowledge, this is the first demonstration of SC generation which is directly pumped by an all-fiber noise-like pulse oscillator. PMID:26831958

  20. 'The trial the world is watching': the 1972 prosecution of Derk Crichton and James Watts, abortion, and the regulation of the medical profession in apartheid South Africa.

    PubMed

    Klausen, Susanne M

    2014-04-01

    After its formation in 1910 as a self-governing dominion within the British empire, the Union of South Africa followed a combination of English and Roman-Dutch common laws on abortion that decreed the procedure permissible only when necessary to save a woman's life. The government continued doing so after South Africa withdrew from the Commonwealth and became a republic in 1961. In 1972 a sensational trial took place in the South African Supreme Court that for weeks placed clandestine abortion on the front pages of the country's newspapers. Two men, one an eminent doctor and the other a self-taught abortionist, were charged with conspiring to perform illegal abortions on twenty-six white teenagers and young unmarried women. The prosecution of Dr Derk Crichton and James Watts occurred while the National Party government was in the process of drafting abortion legislation and was perceived by legal experts as another test of the judiciary's stance on the common law on abortion. The trial was mainly intended to regulate the medical profession and ensure doctors ceased helping young white women evade their 'duty' to procreate within marriage. Ultimately, the event encapsulated a great deal about elites' attempt to buttress apartheid culture and is significant for, among other reasons, contributing to the production of South Africa's extremely restrictive Abortion and Sterilisation Act (1975).

  1. Design of polarizers for a mega-watt long-pulse millimeter-wave transmission line on the large helical device.

    PubMed

    Ii, T; Kubo, S; Shimozuma, T; Kobayashi, S; Okada, K; Yoshimura, Y; Igami, H; Takahashi, H; Ito, S; Mizuno, Y; Okada, K; Makino, R; Kobayashi, K; Goto, Y; Mutoh, T

    2015-02-01

    The polarizer is one of the critical components in a high-power millimeter-wave transmission line. It requires full and highly efficient coverage of any polarization states, high-power tolerance, and low-loss feature. Polarizers with rounded shape at the edge of the periodic groove surface are designed and fabricated by the machining process for a mega-watt long-pulse millimeter-wave transmission line of the electron cyclotron resonance heating system in the large helical device. The groove shape of λ/8- and λ/4-type polarizers for an 82.7 GHz transmission line is optimally designed in an integral method developed in the vector theories of diffraction gratings so that the efficiency to realize any polarization state can be maximized. The dependence of the polarization states on the combination of the two polarizer rotation angles (Φλ/8, Φλ/4) is examined experimentally in a low-power test with the newly developed polarization monitor. The results show that the measured polarization characteristics are in good agreement with the calculated ones.

  2. Ultra-compact Watt-level flat supercontinuum source pumped by noise-like pulse from an all-fiber oscillator.

    PubMed

    Chen, He; Zhou, Xuanfeng; Chen, Sheng-Ping; Jiang, Zong-Fu; Hou, Jing

    2015-12-28

    We demonstrate Watt-level flat visible supercontinuum (SC) generation in photonic crystal fibers, which is directly pumped by broadband noise-like pulses from an Yb-doped all-fiber oscillator. The novel SC generator is featured with elegant all-fiber-integrated architecture, high spectral flatness and high efficiency. Wide optical spectrum spanning from 500 nm to 2300 nm with 1.02 W optical power is obtained under the pump of 1.4 W noise-like pulse. The flatness of the spectrum in the range of 700 nm~1600 nm is less than 5 dB (including the pump residue). The exceptional simplicity, economical efficiency and the comparable performances make the noise-like pulse oscillator a competitive candidate to the widely used cascade amplified coherent pulse as the pump source of broadband SC. To the best of our knowledge, this is the first demonstration of SC generation which is directly pumped by an all-fiber noise-like pulse oscillator.

  3. 'The trial the world is watching': the 1972 prosecution of Derk Crichton and James Watts, abortion, and the regulation of the medical profession in apartheid South Africa.

    PubMed

    Klausen, Susanne M

    2014-04-01

    After its formation in 1910 as a self-governing dominion within the British empire, the Union of South Africa followed a combination of English and Roman-Dutch common laws on abortion that decreed the procedure permissible only when necessary to save a woman's life. The government continued doing so after South Africa withdrew from the Commonwealth and became a republic in 1961. In 1972 a sensational trial took place in the South African Supreme Court that for weeks placed clandestine abortion on the front pages of the country's newspapers. Two men, one an eminent doctor and the other a self-taught abortionist, were charged with conspiring to perform illegal abortions on twenty-six white teenagers and young unmarried women. The prosecution of Dr Derk Crichton and James Watts occurred while the National Party government was in the process of drafting abortion legislation and was perceived by legal experts as another test of the judiciary's stance on the common law on abortion. The trial was mainly intended to regulate the medical profession and ensure doctors ceased helping young white women evade their 'duty' to procreate within marriage. Ultimately, the event encapsulated a great deal about elites' attempt to buttress apartheid culture and is significant for, among other reasons, contributing to the production of South Africa's extremely restrictive Abortion and Sterilisation Act (1975). PMID:24775430

  4. Design of polarizers for a mega-watt long-pulse millimeter-wave transmission line on the large helical device

    SciTech Connect

    Ii, T. Kubo, S.; Shimozuma, T.; Kobayashi, S.; Okada, K.; Yoshimura, Y.; Igami, H.; Takahashi, H.; Ito, S.; Mizuno, Y.; Okada, K.; Mutoh, T.; Makino, R.; Kobayashi, K.; Goto, Y.

    2015-02-15

    The polarizer is one of the critical components in a high-power millimeter-wave transmission line. It requires full and highly efficient coverage of any polarization states, high-power tolerance, and low-loss feature. Polarizers with rounded shape at the edge of the periodic groove surface are designed and fabricated by the machining process for a mega-watt long-pulse millimeter-wave transmission line of the electron cyclotron resonance heating system in the large helical device. The groove shape of λ/8- and λ/4-type polarizers for an 82.7 GHz transmission line is optimally designed in an integral method developed in the vector theories of diffraction gratings so that the efficiency to realize any polarization state can be maximized. The dependence of the polarization states on the combination of the two polarizer rotation angles (Φ{sub λ/8}, Φ{sub λ/4}) is examined experimentally in a low-power test with the newly developed polarization monitor. The results show that the measured polarization characteristics are in good agreement with the calculated ones.

  5. Photosynthetic units.

    PubMed

    Schmid, G H; Gaffron, H

    1968-08-01

    Leaf tissues of aurea mutants of tobacco and Lespedeza have been shown to have higher photosynthetic capacity per molecule of chlorophyll, a higher saturation intensity, a simpler lamellar structure, and the same quantum yield as their dark green parents. Here we report on the values of photosynthetic units for both types of plants and some algae. The unit has been assumed to be about as uniform and steady in the plant world as the quantum efficiency. The number on which all theoretical discussions have been based so far is 2400 per O(2) evolved or CO(2) reduced. With dark green plants and algae our determinations of units by means of 40 microsec flashes superimposed on a steady rate of background photosynthesis at 900 ergs cm(-2) sec(-1) of red light yielded mostly numbers between 2000 and 2700. However, the photosynthetic unit turned out to be very variable, even in these objects. In aurea mutants the unit was distinctly smaller, averaging 600 chl/CO(2). By choosing the right combination of colors for flash and background light, units as low as 300 chl/CO(2) or 40 chl/e(-) could be measured consistently. We found five well-defined groups of units composed of multiples of its smallest member. These new findings are discussed in terms of structural entities that double or divide under the influence of far-red light.

  6. Subduction of Young Lithosphere at Critical Thermal Ages (10-20 Ma): Incites From Thermal Models and the Trans-Mexican Subduction System with Emphasis on the Importance of Slab Travel Times

    NASA Astrophysics Data System (ADS)

    Grose, C. J.

    2007-12-01

    The Trans-Mexican Volcanic Belt (TMVB) is a system where the age range of subducting plates is typically thought of as critical in their relation to lithospheric thermal structure (~10-20 Ma). I refer to this age range as "critical" because it is in this range where thermal lithospheres begin to rapidly decrease their correlative influence on the thermal state of the subduction system above the crust/mantle wedge interface for most systems. After ~20 Ma the cool upper portion of downgoing lithosphere becomes sufficiently thick so that crustal reheating and corresponding heat flow in the time between trench subduction and the zone of melt generation, due to the accumulation of conductive and frictional heating, behaves somewhat similarly with little regard to age. Typical slab travel times are on the order of 1.5-2.5 My. However, low dip angles and flat-slab behavior in the Eastern end of the TMVB facilitates anomalously long travel times exceeding 6.5 My! Here I show that while the influence of plate age is clearly significant in determining the holistic thermal geodynamics of subduction systems, the influence can be dampened or enhanced by auxiliary factors. I present thermal modeling cases using a solution for the conduction of heat into an evolving semi-infinite half-space with variable boundary conditions. Preliminary results indicate that extraordinary slab travel times and flat-slab behavior, mantle wedge advection regimes, and plate age thermally enhance and dampen each other. Geochemically, the TMVB shows consistent along-arc changes in light element abundance systematics (B/Be, Li/Yb, Be/Zr). Moderately elevated B/Be (Easterly increases from ~4 to ~12 ppm B/Be) observed in the eastern shallow subduction region is thought to correlate with subduction of an older, cooler portion of the slab. However, greater slab travel times in the Eastern TVMB should simultaneously act to warm the slab and depreciate these values which may partly explain the minimal

  7. Multimegabit Operation Multiplexer System. [PCM telemetry unit for space applications

    NASA Technical Reports Server (NTRS)

    Giri, R. R.; Maxwell, M. S.

    1973-01-01

    The Multimegabit Operation Multiplexer System (MOMS) is a high-data-rate PCM telemetry unit capable of sampling and encoding 60 scanning radiometer and four vidicon channels at 250 kilosamples/second and 5 megasamples/second, respectively. This sampling capacity plus the seven-bit quantization requires a total throughput rate of 40 megasamples/second and 280 megabits/second. To produce these rates efficiently, the system was divided into a pair of identical 140-megabit blocks. A low-power 20-MHz analog multiplexer and analog-to-digital converter were developed together with a video sample-and-hold that features an aperture time error of less than 50 psec. Breadboard testing of these basic building blocks confirmed the design prediction that the total system would consume 27 watts of power. Two 140-megabit output parts are suitable for quadriphase modulation.

  8. [Conservation Units.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin.

    Instructional units deal with each aspect of conservation: forests, wildlife, rangelands, water, minerals, and soil. The area of the secondary school curriculum with which each is correlated is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the topic, questions to…

  9. [Conservation Units.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin.

    Each of the six instructional units deals with one aspect of conservation: forests, water, rangeland, minerals (petroleum), and soil. The area of the elementary school curriculum with which each correlates is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the…

  10. What induces watts in WAT?

    PubMed Central

    Forest, Claude; Joffin, Nolwenn; Jaubert, Anne-Marie; Noirez, Philippe

    2016-01-01

    ABSTRACT Excess calories stored in white adipose tissue (WAT) could be reduced either through the activation of brown adipose tissue (BAT) or the development of brown-like cells (“beige” or “brite”) in WAT, a process named “browning.” Calorie dissipation in brown and beige adipocytes might rely on the induction of uncoupling protein 1 (UCP1), which is absent in white fat cells. Any increase in UCP1 is commonly considered as the trademark of energy expenditure. The intracellular events involved in the recruitment process of beige precursors were extensively studied lately, as were the effectors, hormones, cytokines, nutrients and drugs able to modulate the route of browning and theoretically affect fat mass in rodents and in humans. The aim of this review is to update the characterization of the extracellular effectors that induce UCP1 in WAT and potentially provoke calorie dissipation. The potential influence of metabolic cycling in energy expenditure is also questioned. PMID:27386158

  11. 500-watt commercialized concentrator system

    SciTech Connect

    Ronney, K.; Aerni, E.

    1983-02-01

    A passively cooled, single-axis tracking, polar-axis mounted photovoltaic concentrator system has been designed, fabricated, installed, and tested. System description, design considerations, system performance and a production cost estimate are detailed.

  12. Analysis, design, fabrication and testing of the mini-Brayton rotating unit (Mini-BRU). Volume 1: Text and tables

    NASA Technical Reports Server (NTRS)

    Dobler, F. X.

    1978-01-01

    A 500 to 2100 watt power output Mini-Brayton Rotating Unit (Mini-BRU)was analyzed, designed, fabricated and tested. Performance and test data for the various components is included. Components tested include the 2.12 in. diameter compressor, the 2.86 in. diameter turbine, the Rice alternator and the cantilevered foil-type journal and thrust bearings. Also included are results on the fabrication of a C-103 turbine plenum/nozzle assembly and on offgassing of the organic materials in the alternator stator.

  13. United Kingdom.

    PubMed

    1987-01-01

    This summary of the people, geography, history, economy, government, defense and foreign affairs of the United Kingdom includes England, Wales, Scotland and Northern Ireland. The area contains 56.4 million inhabitants, with a negligible growth rate, one of the most densely populated regions in Europe, especially so in the southeast portion of England. The history of British unification, colonial expansion and industrialization is presented. Currently the British colonies are becoming independent members of the Commonwealth, retaining many British institutions, such as the parliamentary system of government. Slower economic growth recently has prompted privatization of previously nationalized industries by the conservative government in power. Britain's only natural resources are coal and North Sea oil and gas; her economy depends on manufacturing. Britain donates significant funds to developing countries, 70% of that going to Commonwealth nations. Her present military emphasis is on Europe and NATO commitments.

  14. Termination unit

    DOEpatents

    Traeholt, Chresten [Frederiksberg, DK; Willen, Dag [Klagshamn, SE; Roden, Mark [Newnan, GA; Tolbert, Jerry C [Carrollton, GA; Lindsay, David [Carrollton, GA; Fisher, Paul W [Heiskell, TN; Nielsen, Carsten Thidemann [Jaegerspris, DK

    2014-01-07

    This invention relates to a termination unit comprising an end-section of a cable. The end section of the cable defines a central longitudinal axis and comprising end-parts of N electrical phases, an end-part of a neutral conductor and a surrounding thermally insulation envelope adapted to comprising a cooling fluid. The end-parts of the N electrical phases and the end-part of the neutral conductor each comprising at least one electrical conductor and being arranged in the cable concentrically around a core former with a phase 1 located relatively innermost, and phase N relatively outermost in the cable, phase N being surrounded by the neutral conductor, electrical insulation being arrange between neighboring electrical phases and between phase N and the neutral conductor, and wherein the end-parts of the neutral conductor and the electrical phases each comprise a contacting surface electrically connected to at least one branch current lead to provide an electrical connection: The contacting surfaces each having a longitudinal extension, and being located sequentially along the longitudinal extension of the end-section of the cable. The branch current leads being individually insulated from said thermally insulation envelope by individual electrical insulators.

  15. Termination unit

    DOEpatents

    Traeholt, Chresten; Willen, Dag; Roden, Mark; Tolbert, Jerry C.; Lindsay, David; Fisher, Paul W.; Nielsen, Carsten Thidemann

    2016-05-03

    Cable end section comprises end-parts of N electrical phases/neutral, and a thermally-insulation envelope comprising cooling fluid. The end-parts each comprises a conductor and are arranged with phase 1 innermost, N outermost surrounded by the neutral, electrical insulation being between phases and N and neutral. The end-parts comprise contacting surfaces located sequentially along the longitudinal extension of the end-section. A termination unit has an insulating envelope connected to a cryostat, special parts at both ends comprising an adapter piece at the cable interface and a closing end-piece terminating the envelope in the end-section. The special parts houses an inlet and/or outlet for cooling fluid. The space between an inner wall of the envelope and a central opening of the cable is filled with cooling fluid. The special part at the end connecting to the cryostat houses an inlet or outlet, splitting cooling flow into cable annular flow and termination annular flow.

  16. Light-weight radioisotope heater unit (LWRHU) impact tests

    NASA Astrophysics Data System (ADS)

    Reimus, M. A. H.; Rinehart, G. H.; Herrera, A.; Lopez, B.; Lynch, C.; Moniz, P.

    1998-01-01

    The light-weight radioisotope heater unit (LWRHU) is a 238PuO2-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed 238PuO2 fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

  17. Light-weight radioisotope heater unit (LWRHU) impact tests

    SciTech Connect

    Reimus, M. A. H.; Rinehart, G. H.; Herrera, A.; Lopez, B.; Lynch, C.; Moniz, P.

    1998-01-15

    The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

  18. Breakeven Prices for Photovoltaics on Supermarkets in the United States

    SciTech Connect

    Ong, S.; Clark, N.; Denholm, P.; Margolis, R.

    2013-03-01

    The photovoltaic (PV) breakeven price is the PV system price at which the cost of PV-generated electricity equals the cost of electricity purchased from the grid. This point is also called 'grid parity' and can be expressed as dollars per watt ($/W) of installed PV system capacity. Achieving the PV breakeven price depends on many factors, including the solar resource, local electricity prices, customer load profile, PV incentives, and financing. In the United States, where these factors vary substantially across regions, breakeven prices vary substantially across regions as well. In this study, we estimate current and future breakeven prices for PV systems installed on supermarkets in the United States. We also evaluate key drivers of current and future commercial PV breakeven prices by region. The results suggest that breakeven prices for PV systems installed on supermarkets vary significantly across the United States. Non-technical factors -- including electricity rates, rate structures, incentives, and the availability of system financing -- drive break-even prices more than technical factors like solar resource or system orientation. In 2020 (where we assume higher electricity prices and lower PV incentives), under base-case assumptions, we estimate that about 17% of supermarkets will be in utility territories where breakeven conditions exist at a PV system price of $3/W; this increases to 79% at $1.25/W (the DOE SunShot Initiative's commercial PV price target for 2020). These percentages increase to 26% and 91%, respectively, when rate structures favorable to PV are used.

  19. Accounting 10-20-30. Business Education Curriculum Guide.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This curriculum guide is one of nine such guides developed for an Alberta high school business education program. Its content covers the main subject area or strand of accounting. Subject to the constraints outlined in the guide, the modules are to be formatted into three- or four-credit courses within each strand. Introductory materials include a…

  20. 46 CFR 151.10-20 - Hull construction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... hopper. (4) All barges in ocean or coastwise service shall be provided with a structural deck and hatches.... (3) Types I and II barges in ocean service: (i) Independent tank barges with tanks supported by three or more saddles shall be subjected to a 0.6L0.6 trochoidal wave hogsag analysis to determine...

  1. 33 CFR 67.10-20 - Sound signal tests.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... NAVIGATION AIDS TO NAVIGATION ON ARTIFICIAL ISLANDS AND FIXED STRUCTURES General Requirements for Sound... third harmonic. (c) In analyzing the test data to determine the minimum power necessary to produce...

  2. 33 CFR 67.10-20 - Sound signal tests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... NAVIGATION AIDS TO NAVIGATION ON ARTIFICIAL ISLANDS AND FIXED STRUCTURES General Requirements for Sound... third harmonic. (c) In analyzing the test data to determine the minimum power necessary to produce...

  3. 46 CFR 151.10-20 - Hull construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    .... (2) All “open hopper” type barges shall be provided with coamings around the hopper space and a 36... provided with an 18-inch minimum coaming all around the hopper. (3) All “open hopper” type barges modified... requirements of the American Bureau of Shipping. (b) Hull structural requirements. (1) All Types I, II, and...

  4. Curriculum Guide for Philosophy: Social Sciences 10-20-30.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton.

    The document presents an introduction to the study of philosophy. It is intended as an aid to secondary school social studies classroom teachers as they develop and implement programs which help students understand the relevance of philosophy and appreciate philosophical thought. The document is presented in four sections--a general introduction…

  5. 46 CFR 151.10-20 - Hull construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... rests upon a pinnacle at the water surface. The maximum hull and tank bending moment and tank saddle..., regardless of the number of saddle supports shall be subject to a still water bending analysis to determine... reactions. (iii) The still water tank bending moments and saddle reactions shall be superimposed upon...

  6. 46 CFR 151.10-20 - Hull construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... rests upon a pinnacle at the water surface. The maximum hull and tank bending moment and tank saddle..., regardless of the number of saddle supports shall be subject to a still water bending analysis to determine... reactions. (iii) The still water tank bending moments and saddle reactions shall be superimposed upon...

  7. Computer Processing 10-20-30. Business Education Curriculum Guide.

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Curriculum Branch.

    This curriculum guide is one of nine such guides developed for an Alberta high school business education program. Its content covers the main subject area or strand of computer processing. Subject to the constraints outlined in the guide, the modules are to be formatted into three- or four-credit courses within each strand. Introductory materials…

  8. 46 CFR 2.10-20 - General requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....O. Box 531030, Atlanta, GA 30353-1030. (iii) For payment by check, made payable to U.S. Treasury... (COI), 1075 Loop Road, Atlanta, GA 30337-6002. (2) For Overseas Inspection Fees: (i) For payment by... 531769, Atlanta, GA 30353-1769. (iii) For payment by check, made payable to U.S. Treasury, with...

  9. 46 CFR 2.10-20 - General requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ....O. Box 531030, Atlanta, GA 30353-1030. (iii) For payment by check, made payable to U.S. Treasury... (COI), 1075 Loop Road, Atlanta, GA 30337-6002. (2) For Overseas Inspection Fees: (i) For payment by... 531769, Atlanta, GA 30353-1769. (iii) For payment by check, made payable to U.S. Treasury, with...

  10. 46 CFR 2.10-20 - General requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....O. Box 531030, Atlanta, GA 30353-1030. (iii) For payment by check, made payable to U.S. Treasury... (COI), 1075 Loop Road, Atlanta, GA 30337-6002. (2) For Overseas Inspection Fees: (i) For payment by... 531769, Atlanta, GA 30353-1769. (iii) For payment by check, made payable to U.S. Treasury, with...

  11. 46 CFR 2.10-20 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Inspection Fees, P.O. Box 531030, Atlanta, GA 30353-1030. (iii) For payment by check, made payable to U.S... 531030 (COI), 1075 Loop Road, Atlanta, GA 30337-6002. (2) For Overseas Inspection Fees: (i) For payment..., P.O. Box 531769, Atlanta, GA 30353-1769. (iii) For payment by check, made payable to U.S....

  12. Budget Update, November 9, 2010. Report 10-20

    ERIC Educational Resources Information Center

    Woolfork, Kevin

    2010-01-01

    On October 8, Governor Arnold Schwarzenegger signed the 2010-11 Budget Act for the State of California. This budget was the outcome of many months of negotiation between the Governor and the Legislature. The Governor vetoed $963 million in spending from the Legislature's budget, arriving at a budget that addresses an estimated $19.1 billion…

  13. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet....

  14. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet....

  15. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet....

  16. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet....

  17. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet....

  18. 46 CFR 151.10-20 - Hull construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... reactions (if applicable) shall be determined. The hull bending stress shall not exceed the applicable... hull. In such case, the hull stress shall not exceed either 50 percent of the minimum ultimate tensile... such case, the hull stress shall not exceed the percentage stress values prescribed in §...

  19. The NASA - Arc 10/20 micron camera

    NASA Technical Reports Server (NTRS)

    Roellig, T. L.; Cooper, R.; Deutsch, L. K.; Mccreight, C.; Mckelvey, M.; Pendleton, Y. J.; Witteborn, F. C.; Yuen, L.; Mcmahon, T.; Werner, M. W.

    1994-01-01

    A new infrared camera (AIR Camera) has been developed at NASA - Ames Research Center for observations from ground-based telescopes. The heart of the camera is a Hughes 58 x 62 pixel Arsenic-doped Silicon detector array that has the spectral sensitivity range to allow observations in both the 10 and 20 micron atmospheric windows.

  20. Watt-level second-harmonic generation at 589  nm with a PPMgO:LN ridge waveguide crystal pumped by a DBR tapered diode laser.

    PubMed

    Bege, R; Jedrzejczyk, D; Blume, G; Hofmann, J; Feise, D; Paschke, K; Tränkle, G

    2016-04-01

    A DBR tapered diode laser in continuous wave operation was used to generate second-harmonic radiation at 589 nm in a PPMgO:LN ridge waveguide crystal. An optical output power of 0.86 W at an optical-to-optical and an electrical-to-optical efficiency of 42% and 11%, respectively, was achieved. The visible radiation was characterized by a spectral bandwidth ΔνFWHM of 230 MHz and a beam propagation parameter M1/e22 better than 1.1. The integration of such a system into a housing of a small footprint will enable a portable and highly efficient module featuring a visible output power in the watt-level range. PMID:27192279

  1. Short Note on Units: Planetary Units

    ERIC Educational Resources Information Center

    Huggins, Elisha

    2010-01-01

    While the emphasis on SI units in introductory physics textbooks has mercifully eliminated the use of English units, the exclusion of other systems of units is not necessary. For years physicists have simplified calculations by doing things like setting [h-bar] = c = 1. We could not imagine putting 4[pi][epsilon][subscript 0] into the formulas for…

  2. Guidelines for designing a digestive disease endoscopy unit: report of the World Endoscopy Organization.

    PubMed

    Mulder, Chris J J; Jacobs, Maarten A J M; Leicester, Roger J; Nageshwar Reddy, D; Shepherd, Libby E A; Axon, Anthony T; Waye, Jerome D

    2013-07-01

    A dedicated digestive disease endoscopy unit is structurally and functionally differentiating rapidly as a result of increasing diagnostic and therapeutic possibilities in the last 10-20 years. Publications with practical details are scarce, imposing a challenge in the construction of such a unit. The lack of authoritative information about endoscopy unit design means that architects produce their own design with or without consulting endoscopists working in such a unit. A working group of the World Endoscopy Organization discussed and outlined a practical approach fordesign and construction of a modern endoscopy unit. Designing the layout is extremely important, necessitating thoughtful planning to provide comfort to the endoscopy staff and patients, and efficient data archiving and transmission during endoscopic services. PMID:23701732

  3. "Madeline." A Literature Unit.

    ERIC Educational Resources Information Center

    Holzschuher, Cynthia

    Intended as a an aid to elementary school teachers, this handbook presents a literature unit based on the children's book, "Madeline" (Ludwig Bemelmans). It begins with sample lesson plans, a unit planner, getting to know the book and author, and suggestions for using the unit activities. Next, a section offers unit activities focusing on language…

  4. Accelerating sparse linear algebra using graphics processing units

    NASA Astrophysics Data System (ADS)

    Spagnoli, Kyle E.; Humphrey, John R.; Price, Daniel K.; Kelmelis, Eric J.

    2011-06-01

    The modern graphics processing unit (GPU) found in many standard personal computers is a highly parallel math processor capable of over 1 TFLOPS of peak computational throughput at a cost similar to a high-end CPU with excellent FLOPS-to-watt ratio. High-level sparse linear algebra operations are computationally intense, often requiring large amounts of parallel operations and would seem a natural fit for the processing power of the GPU. Our work is on a GPU accelerated implementation of sparse linear algebra routines. We present results from both direct and iterative sparse system solvers. The GPU execution model featured by NVIDIA GPUs based on CUDA demands very strong parallelism, requiring between hundreds and thousands of simultaneous operations to achieve high performance. Some constructs from linear algebra map extremely well to the GPU and others map poorly. CPUs, on the other hand, do well at smaller order parallelism and perform acceptably during low-parallelism code segments. Our work addresses this via hybrid a processing model, in which the CPU and GPU work simultaneously to produce results. In many cases, this is accomplished by allowing each platform to do the work it performs most naturally. For example, the CPU is responsible for graph theory portion of the direct solvers while the GPU simultaneously performs the low level linear algebra routines.

  5. Light-Weight Radioisotope Heater Unit (LWRHU) sequential impact tests

    SciTech Connect

    Reimus, M.A.H.; Rinehart, G.H.

    1997-08-01

    The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. A series of sequential impacts tests using simulant-fueled LWRHU capsules was recently conducted to determine a failure threshold. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Although the tests were conducted until the aeroshells were sufficiently distorted to be out of dimensional specification, the simulant-fueled capsules used in these tests were not severely deformed. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s. Postimpact examination revealed that the sequentially impacted capsules were slightly more deformed and were outside of dimensional specifications.

  6. ‘The Trial the World is Watching’: The 1972 Prosecution of Derk Crichton and James Watts, Abortion, and the Regulation of the Medical Profession in Apartheid South Africa

    PubMed Central

    Klausen, Susanne M.

    2014-01-01

    After its formation in 1910 as a self-governing dominion within the British empire, the Union of South Africa followed a combination of English and Roman-Dutch common laws on abortion that decreed the procedure permissible only when necessary to save a woman’s life. The government continued doing so after South Africa withdrew from the Commonwealth and became a republic in 1961. In 1972 a sensational trial took place in the South African Supreme Court that for weeks placed clandestine abortion on the front pages of the country’s newspapers. Two men, one an eminent doctor and the other a self-taught abortionist, were charged with conspiring to perform illegal abortions on twenty-six white teenagers and young unmarried women. The prosecution of Dr Derk Crichton and James Watts occurred while the National Party government was in the process of drafting abortion legislation and was perceived by legal experts as another test of the judiciary’s stance on the common law on abortion. The trial was mainly intended to regulate the medical profession and ensure doctors ceased helping young white women evade their ‘duty’ to procreate within marriage. Ultimately, the event encapsulated a great deal about elites’ attempt to buttress apartheid culture and is significant for, among other reasons, contributing to the production of South Africa’s extremely restrictive Abortion and Sterilisation Act (1975). PMID:24775430

  7. A Winter Survival Unit.

    ERIC Educational Resources Information Center

    Phillips, Ronald E.

    1979-01-01

    The article is a condensation of materials from the winter survival unit of a Canadian snow ecology course. The unit covers: cold physiology, frostbite, snowblindness, hypothermia, winter campout, and survival strategies. (SB)

  8. United Cerebral Palsy

    MedlinePlus

    ... be sure to follow us on Twitter . United Cerebral Palsy UCP educates, advocates and provides support services to ... Partners Merz Logo Sprint Relay Copyright © 2015 United Cerebral Palsy 1825 K Street NW Suite 600 Washington, DC ...

  9. Impact of cleaning regimes on dental water unit contamination.

    PubMed

    Abdallah, Soad A; Khalil, Ahmed I

    2011-12-01

    Microorganisms that have been identified in dental unit waterlines (DUWLs) are of concern because they can cause infections, especially in immunocompromised patients. This study aimed to assess the incidence of microbial contamination in DUWLs before and after intervention to reduce contamination, and to investigate the presence of coliforms, Escherichia coli and Pseudomonas aeruginosa. Water samples were collected aseptically from the waterlines. The high-speed hand-piece and dental chair units were served by one distillation apparatus, which was fed by the potable tap water of four dental clinics. Different interventions were used: chlorination, flushing before clinics and between patients, draining at the end of the day, and freshly distilled water on a daily basis. There was a significant difference between the level of contamination in the high-speed hand-piece (1.5-2.7 log CFU/ml) and dental chair unit water (2.0-3.5 log CFU/ml). Coliforms (0.9%) E. coli (0.9%) and Pseudomonas (1.8%) were detected during 2008. This study indicates the need to monitor water quality regularly and prevent stagnation in DUWLs to reduce the number of viable bacteria to <100 CFU/ml. We recommend flushing the DUWL for 2 min before the first patient and for 10-20 s between patients, flushing the dental unit at the end of the day and draining it overnight to reduce the development of biofilms, and chlorination of the DUWLs.

  10. Discharge pattern of tonically activated motor units during unloading.

    PubMed

    Gerilovsky, L; Struppler, A; Velho, F; Niehage, O

    1990-12-01

    In order to analyse the EMG pattern during unloading of brachial biceps muscle, the interference EMG and single motor unit activity were investigated. The measurements were done on seven healthy subjects with two types of unloading techniques: a) active unloading, when the subjects resisted against an external load (10, 20, 30 and 40 N) which is suddenly released, and b) passive unloading, performed by low inertia torque motors with independently adjustable background extension and suddenly applied flexion torques. Following active unloading the silent period duration, the amplitude of the rebound and its segmentation into consecutive bursts is changing with initial load, whereas the silent period latency remains constant. Following passive unloading the acceleration influences predominantly the amplitude of the rebound, without changing its latency and silent period duration. The initial voluntary activity influences both silent period duration and rebound parameters (latency, amplitude and duration). PMID:2286170

  11. Ecological risk assessment for residual coal fly ash at Watts Bar Reservoir, Tennessee: Limited alteration of riverine-reservoir benthic invertebrate community following dredging of ash-contaminated sediment.

    PubMed

    Buys, David J; Stojak, Amber R; Stiteler, William; Baker, Tyler F

    2015-01-01

    Benthic invertebrate communities were assessed after the December 2008 release of approximately 4.1 million m(3) coal fly ash from a disposal dredge cell at the Tennessee Valley Authority (TVA) Kingston Fossil Plant on Watts Bar Reservoir in Roane County, Tennessee, USA. Released ash filled the adjacent embayments and the main channel of the Emory River, migrating into reaches of the Emory, Clinch, and Tennessee Rivers. Dredging was completed in summer 2010, and the benthic community sampling was conducted in December 2010. This study is part of a series that supported an Ecological Risk Assessment for the Kingston site. Benthic invertebrate communities were sampled at transects spread across approximately 20 miles of river that includes both riverine and reservoirlike conditions. Community composition was assessed on a grab sample and transect basis across multiple cross-channel transects to gain an understanding of the response of the benthic community to a fly ash release of this magnitude. This assessment used invertebrate community metrics, similarity analysis, geospatial statistics, and correlations with sediment chemistry and habitat. The community composition was reflective of a reservoir system, with dominant taxa being insect larva, bivalves, and aquatic worms. Most community metric results were similar for ash-impacted areas and upstream reference areas. Variation in the benthic community was correlated more with habitat than with sediment chemistry or residual ash. Other studies have reported that a benthic community can take several years to a decade to recover from ash or ash-related constituents. Although released ash undoubtedly had some initial impacts on the benthic community in this study, the severity of these effects appears to be limited to the initial smothering of the organisms followed by a rapid response and the initial start of recovery postdredging.

  12. One quarter million (500×500) pixel arrays of silicon microcavity plasma devices: Luminous efficacy above 6 lumens/watt with Ne/50% Xe mixtures and a green phosphor

    NASA Astrophysics Data System (ADS)

    Chen, K.-F.; Ostrom, N. P.; Park, S.-J.; Eden, J. G.

    2006-02-01

    Arrays comprising 250 000 Si microcavity plasma devices, each with an emitting aperture of 50×50μm2 and tapered sidewalls (inverted pyramid cavity), have been fabricated in 100-mm (4″) diam. wafers and operated in the rare gases and Ar /N2 mixtures with sinusoidal ac or bipolar dc excitation. Having an overall active area of 25cm2 and a 25% filling factor, these 500×500 arrays exhibit the pixel-to-pixel emission uniformity characteristics of arrays at least a factor of 6 smaller, and yet are efficient in generating vacuum ultraviolet (VUV) radiation. Luminous efficacies above 6lm/W and luminance values approaching 2000cd/m2 are measured when a 500×500 array, operating with a Ne/50% Xe gas mixture, illuminates a 20-μm-thick film of a commercial green phosphor (Mn:Zn2SiO4). Despite the nonoptimal transmission geometry of the array-phosphor structure, the efficacy and luminance produced by the VUV-driven phosphor for a Ne/50% Xe mixture and a total pressure of 800Torr are measured to be 7.2±0.6lm/Watt and 525±75cd/m2, respectively, for a 20-kHz sinusoidal ac voltage of ˜284V rms. Maximizing the luminous efficacy-luminance product lowers the optimal pressure of Ne/50% Xe mixtures to roughly 1atm. The magnitude of the radiant output generated by these arrays, in addition to the rapid rise in emitting efficiency with increased Xe content in Ne/10%-50% Xe mixtures, suggest that this microplasma array structure will be of value for both microdisplay and biomedical applications.

  13. Unit commitment literature synopsis

    SciTech Connect

    Sheble, G.B. . Dept. of Electrical Engineering); Fahd, G.N. )

    1994-02-01

    Several optimization techniques have been applied to the solution of the thermal unit commitment problem. They range from heuristics such as complete enumeration to the more sophisticated ones such as Augmented LaGrangian. The heuristics have even reappeared as expert systems. The problem to solve is the optimal scheduling of generating units over a short-term horizon, typically 168 hours. This paper is an overview of the literature in the unit commitment field over the past twenty five years.

  14. 31 CFR 515.321 - United States; continental United States.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory...

  15. 31 CFR 535.321 - United States; continental United States.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory...

  16. 31 CFR 515.321 - United States; continental United States.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory...

  17. 31 CFR 535.321 - United States; continental United States.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory...

  18. 31 CFR 515.321 - United States; continental United States.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory...

  19. 31 CFR 535.321 - United States; continental United States.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory...

  20. 31 CFR 535.321 - United States; continental United States.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory...

  1. 31 CFR 515.321 - United States; continental United States.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory...

  2. 31 CFR 500.321 - United States; continental United States.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 500.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including U.S. trust...

  3. 31 CFR 515.321 - United States; continental United States.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 515.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof, including the Trust Territory...

  4. 31 CFR 535.321 - United States; continental United States.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States; continental United... General Definitions § 535.321 United States; continental United States. The term United States means the United States and all areas under the jurisdiction or authority thereof including the Trust Territory...

  5. Sub-microWatt threshold nanoisland lasers

    PubMed Central

    Jang, Hoon; Karnadi, Indra; Pramudita, Putu; Song, Jung-Hwan; Soo Kim, Ki; Lee, Yong-Hee

    2015-01-01

    Ultralow threshold nanolasers have been sought after as power efficient light sources in photonic integrated circuits. Here a single-cell nanobeam laser with a nanoisland quantum well is proposed and demonstrated. Continuous operation at 1.5 μm is achieved at room temperature with an ultralow lasing threshold of 210 nW in absorbed power. The size of the active medium is reduced to 0.7 × 0.25 × 0.02 μm3 by removing the absorptive quantum well region surrounding the central cavity. Relatively thick (420 nm) InP slabs are employed to improve the thermal and mechanical characteristics. The nanoisland-based structures will provide a new platform to engineer fundamental light–matter interactions by controlling the size and the location of the nanoemitters, allowing the realization of highly efficient nanophotonic devices. PMID:26391800

  6. Applied Physics at Heriot-Watt.

    ERIC Educational Resources Information Center

    Colles, M. J.

    1979-01-01

    Describes a course in applied physics with solid state electronics, aimed at providing a continuing broad background in general physics while allowing for the gradual development of an emphasis on applications, engineering expertise, and relevant industrial experience. (Author/GA)

  7. Sub-microWatt threshold nanoisland lasers.

    PubMed

    Jang, Hoon; Karnadi, Indra; Pramudita, Putu; Song, Jung-Hwan; Kim, Ki Soo; Lee, Yong-Hee

    2015-01-01

    Ultralow threshold nanolasers have been sought after as power efficient light sources in photonic integrated circuits. Here a single-cell nanobeam laser with a nanoisland quantum well is proposed and demonstrated. Continuous operation at 1.5 μm is achieved at room temperature with an ultralow lasing threshold of 210 nW in absorbed power. The size of the active medium is reduced to 0.7 × 0.25 × 0.02 μm(3) by removing the absorptive quantum well region surrounding the central cavity. Relatively thick (420 nm) InP slabs are employed to improve the thermal and mechanical characteristics. The nanoisland-based structures will provide a new platform to engineer fundamental light-matter interactions by controlling the size and the location of the nanoemitters, allowing the realization of highly efficient nanophotonic devices. PMID:26391800

  8. Light-weight radioisotope heater unit

    SciTech Connect

    Schock, A.

    1981-01-01

    DOE is developing a new generation of radioisotope-fueled 1-watt heaters, for initial use on NASA's Galileo and International Solar-Polar Missions. Each heater must contain passive safety provisions to ensure fuel retention under all credible accident conditions. Initial design reviews raised some concern about the accuracy of the predicted peak reentry temperature, and about the adequacy of the safety margin under certain unlike reentry modes. 5 refs.

  9. Commercial Carpentry: Instructional Units.

    ERIC Educational Resources Information Center

    Diehl, Donald W.; Penner, Wayman R.

    This manual contains instructional materials which measure student performance on commercial carpentry behavioral objectives; criterion-referenced evaluation instruments are also included. Each of the manual's eleven sections consists of one or more units of instruction. Each instructional unit includes behavioral objectives, suggested activities…

  10. REACH. Refrigeration Units.

    ERIC Educational Resources Information Center

    Snow, Rufus; And Others

    As a part of the REACH (Refrigeration, Electro-Mechanical, Air-Conditioning, Heating) electromechanical cluster, this student manual contains individualized instructional units in the area of refrigeration. The instructional units focus on refrigeration fundamentals, tubing and pipe, refrigerants, troubleshooting, window air conditioning, and…

  11. Units of Word Recognition.

    ERIC Educational Resources Information Center

    Santa, Carol M.; And Others

    Both psychologists and reading specialists have been interested in whether words are processed letter by letter or in larger units. A reaction time paradigm was used to evaluate these options with interest focused on potential units of word recognition which might be functional within single syllable words. The basic paradigm involved presenting…

  12. REACH. Air Conditioning Units.

    ERIC Educational Resources Information Center

    Garrison, Joe; And Others

    As a part of the REACH (Refrigeration, Electro-Mechanical, Air-Conditioning, Heating) electromechanical cluster, this student manual contains individualized instructional units in the area of air conditioning. The instructional units focus on air conditioning fundamentals, window air conditioning, system and installation, troubleshooting and…

  13. State hydrologic unit maps

    USGS Publications Warehouse

    Seaber, P.R.; Kapinos, F.P.; Knapp, G.L.

    1984-01-01

    A set of maps depicting approved boundaries of, and numerical codes for, river-basin units of the United States has been developed by the U.S. Geological Survey. These ' State Hydrologic Unit Maps ' are four-color maps that present information on drainage, culture, hydrography, and hydrologic boundaries and codes: (1) the 21 major water-resources regions and the 222 subregions designated by the U.S. Water Resources Council; (2) the 352 accounting units of the U.S. Geological Survey 's National Water Data Network; and (3) the 2,149 cataloging units of the U.S. Geological Survey 's Catalog of Information on Water Data. The maps are plotted on the Geological Survey State base-map series at a scale of 1:500,000 and, except for Alaska, depict hydrologic unit boundaries for all drainage basins greater than 700 mi squared (1,813 km squared). A complete list of all the hydrologic units, along with their drainage areas, their names, and the names of the States or outlying areas in which they reside, is contained in the report. These maps and associated codes provide a standardized base for use by water-resources organizations in locating, storing, retrieving, and exchanging hydrologic data. The Hydrologic Unit Codes shown on the maps have been approved as a Federal Information Processing Standard for use by the Federal establishment. (USGS)

  14. Mobile glazing unit

    NASA Technical Reports Server (NTRS)

    Holt, J. W.

    1981-01-01

    Unit programs thermal cycle from 100 to 2,300 F for firing ceramic gglaze coatings on refractory surfaces in any attitude and position. Device includes control console, heater assembly, protective cover, and manipulator boom; boom places heater next to surface to be fired. Unit is industrially useful for in situ repair of ceramics and curing individual refractory blocks during furnace maintenance.

  15. The United Nations University

    ERIC Educational Resources Information Center

    Salam, Abdus

    1973-01-01

    Reports the progress already made toward the establishment of a postgraduate international university under United Nations auspices. The resolution adopted by the U.N. General Assembly provides a concise statement of the nature and aims of the United Nations University, which is likely to start operating in 1974. (JR)

  16. Labour Studies Units.

    ERIC Educational Resources Information Center

    Holmes, Eric; And Others

    The nine units highlight the history, activities, values, and aspirations of the Canadian labor force. The program's purpose is to help secondary school social studies students develop a more objective appreciation of labor and of labor's role in Canadian social history. The first unit, "Union Today," analyzes contemporary union activity and…

  17. Neighbors United for Health

    ERIC Educational Resources Information Center

    Westhoff, Wayne W.; Corvin, Jaime; Virella, Irmarie

    2009-01-01

    Modeled upon the ecclesiastic community group concept of Latin America to unite and strengthen the bond between the Church and neighborhoods, a community-based organization created Vecinos Unidos por la Salud (Neighbors United for Health) to bring health messages into urban Latino neighborhoods. The model is based on five tenants, and incorporates…

  18. Camp Unit Design Guidelines.

    ERIC Educational Resources Information Center

    Hultsman, John T.; Cottrell, Richard L.

    This document provides a set of generalized guidelines for the design of units in large family campgrounds. Managers of recreational lands have two responsibilities and goals: to protect the natural resources, and to provide an enjoyable experience for users. With these goals in mind, unique variables to each unit such as shade, site aesthetics,…

  19. Quantities, Units, and Symbols.

    ERIC Educational Resources Information Center

    Royal Society, London (England).

    This booklet provides a reference to the quantities, units, and their symbols which are used in physical science. It is a revision of a 1969 report and takes account of the progress which has been made in obtaining international agreement on the definitions, names, and symbols for units and on the rules for the expression of relations involving…

  20. Associative list processing unit

    DOEpatents

    Hemmert, Karl Scott; Underwood, Keith D.

    2013-01-29

    An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full. Also, an associative list processing unit and method comprising employing a plurality of prioritized cell blocks and using a tree of prioritized multiplexers descending from the plurality of cell blocks.

  1. Composite stabilizer unit

    DOEpatents

    Ebaugh, Larry R.; Sadler, Collin P.; Carter, Gary D.

    1992-01-01

    An improved fin stabilized projectile including multiple stabilizer fins upon a stabilizer unit situated at the aft end of the projectile is provided, the improvement wherein the stabilizer fins are joined into the stabillizer unit by an injection molded engineering grade polymer.

  2. Navy closes Antarctic unit

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    After 42 years as a key participant in the United States Antarctic Program (USAP), the U.S. Navy held a ceremony on February 20 to commemorate the closing of its Naval Antarctic Support Unit stationed in New Zealand. The Navy originally had announced its decision to "disestablish" the unit in 1993, citing new global priorities with the end of the Cold War.The Navy will continue to provide limited flight support to the USAP through the end of the 1998-1999 austral research season.

  3. A high power, Coated Particle Fuel Compact Radioisotope Heat Unit

    NASA Astrophysics Data System (ADS)

    King, Jeffrey C.; El-Genk, Mohamed S.

    2001-02-01

    A Coated Particle Fuel Compact, Radioisotope Heater Unit (CPFC-RHU) is proposed, which is capable of generating thermal power in excess of 27 W. This power output is more than four times that of a Hexa-RHU, which generates only six watts of thermal power. The design of the CPFC-RHU is identical to that of the Hexa-RHU, except that the six Pt-30Rh clad fuel pellets and the POCO graphite support in the latter are replaced with single-sized, ZrC coated, 238PuO2 fuel particles ~500 μm in diameter. In addition to fully retaining the helium gas generated by the radioactive decay of the fuel, the CPFC offers promise for enhanced safety. Thermal analyses of the CPFC-RHU show that while the Hexa-RHU is suitable for use in a radioisotope power system (RPS) operating at a converter hot-side temperature of 473 K, the CPFC-RHU could also be used at higher temperatures of 773 K and 973 K with a thermal efficiency >60%. Even at a 473 K converter hot-side temperature, the CPFC-RHU offers higher thermal efficiency (>90%) than the Hexa-RHU (~75%). The CPFC-RHU final design provides constant temperature, with almost uniform radial heat flux to the converter, for enhanced performance, better integration, and higher overall efficiency of the RPS. The present CPFC-RHU fills a gap in the power needs for future space missions requiring electric power of 1-15 W, from a single RPS. .

  4. Associative list processing unit

    DOEpatents

    Hemmert, Karl Scott; Underwood, Keith D

    2014-04-01

    An associative list processing unit and method comprising employing a plurality of prioritized cell blocks and permitting inserts to occur in a single clock cycle if all of the cell blocks are not full.

  5. Exothermic brazing units

    NASA Technical Reports Server (NTRS)

    Mc Caig, J. C.

    1971-01-01

    Units are used for repairing and assembling stainless steel tubing. Heat generated by chemical reaction is used to melt brazing alloy and bonded area is not contaminated by the reactants or by-products of the reaction.

  6. Electrosurgical unit analyzers.

    PubMed

    1998-07-01

    Electrosurgical unit (ESU) analyzers automate the testing and inspection of the output circuits and safety features of ESUs. They perform testing that would otherwise require several other pieces of equipment, as well as considerably more time and greater technician expertise. They are used largely by clinical engineering departments for routine inspection and preventive maintenance (IPM) procedures and, less often, for accident investigations and troubleshooting. In this Evaluation, we tested three ESU analyzers from three suppliers. We rated all three analyzers Acceptable and ranked them in two groupings. In ranking the units, we placed the greatest weight on ease of use for routine ESU inspections, and gave additional consideration to versatility for advanced applications such as ESU research. The unit in Group 1 was the easiest to use, especially for infrequent users. The units in Group 2 were satisfactory but require more frequent use to maintain proficiency and to avoid user errors. PMID:9689540

  7. Insects: An Interdisciplinary Unit

    ERIC Educational Resources Information Center

    Leger, Heather

    2007-01-01

    The author talks about an interdisciplinary unit on insects, and presents activities that can help students practice communication skills (interpersonal, interpretive, and presentational) and learn about insects with hands-on activities.

  8. Illuminance of neonatal units.

    PubMed

    Robinson, J; Moseley, M J; Fielder, A R

    1990-07-01

    We have measured the illuminance (brightness) of seven neonatal units during both the day and the night. When the units were lit solely by fluorescent tubes the mean illuminance was 348 lux (range 192-690). During the day the mean illuminance was 470 lux (range 236-905). The high dependency regions in four of the seven units were significantly brighter than the corresponding low dependency nurseries at all times. In two of these units there is a policy of reducing the amount of artificial light in the low dependency areas at night, and in these the normal mean illuminance was 50 lux. We have measured the general levels of illumination to which a neonate might be exposed; the ocular exposure to light of a neonate depends, however, on both physical and biological factors and more research is required before an accurate estimate can be made.

  9. UnitedHealth Group

    Cancer.gov

    UnitedHealth Group provides accessible and affordable services, improved quality of care, coordinated health care efforts, and a supportive environment for shared decision making between patients and their physicians.

  10. California Groundwater Units

    USGS Publications Warehouse

    Johnson, Tyler D.; Belitz, Kenneth

    2014-01-01

    The California Groundwater Units dataset classifies and delineates areas within the State of California into one of three groundwater-based polygon units: (1) those areas previously defined as alluvial groundwater basins or subbasins, (2) highland areas that are adjacent to and topographically upgradient of groundwater basins, and (3) highland areas not associated with a groundwater basin, only a hydrogeologic province. In total, 938 Groundwater Units are represented. The Groundwater Units dataset relates existing groundwater basins with their newly delineated highland areas which can be used in subsequent hydrologic studies. The methods used to delineate groundwater-basin-associated highland areas are similar to those used to delineate a contributing area (such as for a lake or water body); the difference is that highland areas are constrained to the immediately surrounding upslope (upstream) area. Upslope basins have their own delineated highland. A geoprocessing tool was created to facilitate delineation of highland areas for groundwater basins and subbasins and is available for download.

  11. Voltage verification unit

    DOEpatents

    Martin, Edward J.

    2008-01-15

    A voltage verification unit and method for determining the absence of potentially dangerous potentials within a power supply enclosure without Mode 2 work is disclosed. With this device and method, a qualified worker, following a relatively simple protocol that involves a function test (hot, cold, hot) of the voltage verification unit before Lock Out/Tag Out and, and once the Lock Out/Tag Out is completed, testing or "trying" by simply reading a display on the voltage verification unit can be accomplished without exposure of the operator to the interior of the voltage supply enclosure. According to a preferred embodiment, the voltage verification unit includes test leads to allow diagnostics with other meters, without the necessity of accessing potentially dangerous bus bars or the like.

  12. United Leukodystrophy Foundation

    MedlinePlus

    ... Benefit Drawing to … Read More » Research Grant Applications Now Being Solicited The United Leukodystrophy Foundation is soliciting grant applications to support … Read More » Dr. Matalon Wins ULF Service Award Congratulations to Dr. Reuben Matalon ...

  13. Water sample filtration unit

    USGS Publications Warehouse

    Skougstad, M.W.; Scarbro, G.F.

    1968-01-01

    A readily portable, all plastic, pressure filtration unit is described which greatly facilitates rapid micropore membrane field filtration of up to several liters of water with a minimum risk of inorganic chemical alteration or contamination of the sample. The unit accommodates standard 10.2-cm. (4-inch) diameter filters. The storage and carrying case serves as a convenient filter stand for both field and laboratory use.

  14. Hydrologic unit maps

    USGS Publications Warehouse

    Seaber, Paul R.; Kapinos, F. Paul; Knapp, George L.

    1987-01-01

    A set of maps depicting approved boundaries of, and numerical codes for, river-basin units of the United States has been developed by the U.S . Geological Survey. These 'Hydrologic Unit Maps' are four-color maps that present information on drainage, culture, hydrography, and hydrologic boundaries and codes of (1) the 21 major water-resources regions and the 222 subregions designated by the U.S . Water Resources Council, (2) the 352 accounting units of the U.S. Geological Survey's National Water Data Network, and (3) the 2,149 cataloging units of the U.S . Geological Survey's 'Catalog of information on Water Data:' The maps are plotted on the Geological Survey State base-map series at a scale of 1 :500,000 and, except for Alaska, depict hydrologic unit boundaries for all drainage basins greater than 700 square miles (1,813 square kilometers). A complete list of all the hydrologic units, along with their drainage areas, their names, and the names of the States or outlying areas in which they reside, is contained in the report. These maps and associated codes provide a standardized base for use by water-resources organizations in locating, storing, retrieving, and exchanging hydrologic data, in indexing and inventorying hydrologic data and information, in cataloging water-data acquisition activities, and in a variety of other applications. Because the maps have undergone extensive review by all principal Federal, regional, and State water-resource agencies, they are widely accepted for use in planning and describing water-use and related land-use activities, and in geographically organizing hydrologic data . Examples of these uses are given in the report . The hydrologic unit codes shown on the maps have been approved as a Federal Information Processing Standard for use by the Federal establishment.

  15. Battery thermal management unit

    NASA Astrophysics Data System (ADS)

    Sanders, Nicholas A.

    1989-03-01

    A battery warming device has been designed which uses waste heat from an operating internal combustion engine to warm a battery. A portion of the waste heat is stored in the sensible and latent heat of a phase change type material for use in maintaining the battery temperature after the engine is shut off. The basic design of the device consists of a Phase Change Material (PCM) reservoir and a simple heat exchanger connected to the engineer's cooling system. Two types of units were built, tested and field trialed. A strap-on type which was strapped to the side of an automotive battery and was intended for the automotive after-market and a tray type on which a battery or batteries sat. This unit was intended for the heavy duty truck market. It was determined that both types of units increased the average cranking power of the batteries they were applied to. Although there were several design problems with the units such as the need for an automatic thermostatically controlled bypass valve, the overall feeling is that there is a market opportunity for both the strap-on and tray type battery warming units.

  16. The clinical skills unit.

    PubMed Central

    Bligh, J.

    1995-01-01

    Clinical skills units offer exciting and innovative ways of learning about clinical skills. Links between theoretical knowledge and clinical practice are appropriate for both undergraduate and postgraduate training. Students and doctors can practice and acquire technical and examination skills in a standardised and protected environment without being concerned about the distress such learning may cause real patients. Models and simulators used in skills units are being developed to keep pace with demand, with a corresponding increase in standards of quality and durability. As undergraduate medical courses respond to the demands of modern clinical practice the use of such facilities will increase. This paper describes the functions of skills units and provides practical examples of educational strategies in use. Images p731-a p731-b p731-c p731-d PMID:8552536

  17. Three conceptual units for behavior

    PubMed Central

    Moxley, Roy

    1987-01-01

    Three generic units for behavior are examined in terms of their background: an if-then unit for stimulus and response (S-R), a holistic unit for Kantor's behavior segment, and an AB-because-of-C unit for Skinner's three-term contingency. The units are distinguished in terms of their respective historical backgrounds, causal modes, advantages, and disadvantages. The ways in which these units may be compatible are discussed. PMID:22477957

  18. TRW utility demonstration unit

    SciTech Connect

    Not Available

    1990-01-01

    The TRW Advanced Entrained Coal Combustor Demonstration Project consists of retrofitting Orange and Rockland (O R) Utility Corporation's Lovett Plant Unit No. 3 with four (4) slagging combustors which will allow the gas/oil unit to fire 2.5% sulfur coal. The slagging combustor process will provide NO{sub x} and SO{sub x} emissions that meet NSPS and New York State Environmental Standards. During this report period, activity continued to address the total program funding shortfall. Ideas and responsibilities for further evaluation have been put forward to reduce the shortfall. In addition, an effort aimed at gaining additional program sponsorships, was initiated.

  19. Unit train loadout innovations

    SciTech Connect

    Campbell, J.A.L.; Gardner, T.G.

    1993-12-31

    A number of material handling related innovations developed by the coal, rail, and ancillary-type industries are allowing coal mining companies to be highly productive in a very competitive energy market. New technology is rapidly leading to fully automated loading, weighing, identification (reading), and quality control systems for equally new unit trains. The important innovations that have improved in-motion, unit-train coal loading include batch loading systems and coupled-in-motion weighing-feed back systems; top-off loading systems; radio-frequency car tagging (identification); and high speed coupled-in-motion weighing scales.

  20. Base units of the SI, fundamental constants and modern quantum physics.

    PubMed

    Bordé, Christian J

    2005-09-15

    Over the past 40 years, a number of discoveries in quantum physics have completely transformed our vision of fundamental metrology. This revolution starts with the frequency stabilization of lasers using saturation spectroscopy and the redefinition of the metre by fixing the velocity of light c. Today, the trend is to redefine all SI base units from fundamental constants and we discuss strategies to achieve this goal. We first consider a kinematical frame, in which fundamental constants with a dimension, such as the speed of light c, the Planck constant h, the Boltzmann constant k(B) or the electron mass m(e) can be used to connect and redefine base units. The various interaction forces of nature are then introduced in a dynamical frame, where they are completely characterized by dimensionless coupling constants such as the fine structure constant alpha or its gravitational analogue alpha(G). This point is discussed by rewriting the Maxwell and Dirac equations with new force fields and these coupling constants. We describe and stress the importance of various quantum effects leading to the advent of this new quantum metrology. In the second part of the paper, we present the status of the seven base units and the prospects of their possible redefinitions from fundamental constants in an experimental perspective. The two parts can be read independently and they point to these same conclusions concerning the redefinitions of base units. The concept of rest mass is directly related to the Compton frequency of a body, which is precisely what is measured by the watt balance. The conversion factor between mass and frequency is the Planck constant, which could therefore be fixed in a realistic and consistent new definition of the kilogram based on its Compton frequency. We discuss also how the Boltzmann constant could be better determined and fixed to replace the present definition of the kelvin.

  1. Light-Weight Radioisotope Heater Unit Safety Analysis Report (LWRHU-SAR). Volume I. A. Introduction and executive summary. B. Reference Design Document (RDD)

    SciTech Connect

    Johnson, E.W.

    1985-10-01

    The orbiter and probe portions of the NASA Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Nuclear Projects (OSNP) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulate mission failures or malfunctions occur, which would result in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events.

  2. Light-Weight Radioisotope Heater Unit final safety analysis report (LWRHU-FSAR): Volume 1: A. Introduction and executive summary: B. Reference Design Document (RDD)

    SciTech Connect

    Johnson, E.W.

    1988-10-01

    The orbiter and probe portions of the National Aeronautics and Space Administration (NASA) Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Applications (OSA) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report, prepared by Monsanto Research Corporation (MRC), addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulated mission failures or malfunctions occur, resulting in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events. 11 refs., 44 figs., 11 tabs.

  3. SI Units to be Used in Place of Imperial Units and Old Metric Units

    ERIC Educational Resources Information Center

    Australian Science Teachers Journal, 1975

    1975-01-01

    A table lists the following quantities in imperial units, old metric units, and SI units: mass, force, energy, torque, power, pressure, temperature, thermal conductivity, frequency, dynamic viscosity, and kinematic viscosity. (MLH)

  4. Unitized paramagnetic salt thermometer

    SciTech Connect

    Abraham, B.M.

    1982-06-01

    The details of construction and assembly of a cerous magnesium nitrate (CMN) paramagnetic thermometer are presented. The thermometer is a small unit consisting of a primary, two secondaries, the salt pill, and thermal links. The thermometer calibration changes very little on successive coolings and is reliable to 35 mK. A typical calibration curve is also presented.

  5. Creative Construction: Unit Blocks.

    ERIC Educational Resources Information Center

    Texas Child Care, 1999

    1999-01-01

    Describes the use of unit blocks with young children in early childhood education (ECE) settings to expand all areas of the curriculum. Discusses the origin of blocks in ECE programs, presents developmental stages of block play, describes children's building styles, and makes recommendations for getting started in block play for children of…

  6. Women's Rights Unit.

    ERIC Educational Resources Information Center

    Weiss, Helen; Weigel, Margaret

    Designed for use in the intermediate grades, this interdisciplinary unit helps students examine traditional and modern roles of women. Fourteen lessons focus on women's activities in colonial America, reasons for women's discontent, the women's rights movement of the 1800's, changes in the roles of women, enfranchisement of women, women's role…

  7. Gemini facility calibration unit

    NASA Astrophysics Data System (ADS)

    Ramsay-Howat, Suzanne K.; Harris, John W.; Gostick, David C.; Laidlaw, Ken; Kidd, Norrie; Strachan, Mel; Wilson, Ken

    2000-08-01

    High-quality, efficient calibration instruments is a pre- requisite for the modern observatory. Each of the Gemini telescopes will be equipped with identical facility calibration units (GCALs) designed to provide wavelength and flat-field calibrations for the suite of instruments. The broad range of instrumentation planned for the telescopes heavily constrains the design of GCAL. Short calibration exposures are required over wavelengths from 0.3micrometers to 5micrometers , field sizes up to 7 arcminutes and spectral resolution from R-5 to 50,000. The output from GCAL must mimic the f-16 beam of the telescope and provide a uniform illumination of the focal plane. The calibration units are mounted on the Gemini Instrument Support Structure, two meters from the focal pane, necessitating the use of large optical components. We will discuss the opto-mechanical design of the Gemini calibration unit, with reference to those feature which allow these stringent requirements to be met. A novel reflector/diffuser unit replaces the integration sphere more normally found in calibration systems. The efficiency of this system is an order of magnitude greater than for an integration sphere. A system of two off-axis mirrors reproduces the telescope pupil and provides the 7 foot focal plane. The results of laboratory test of the uniformity and throughput of the GCAL will be presented.

  8. Teletype test unit

    NASA Technical Reports Server (NTRS)

    Couch, R. H.; Beall, H. C.

    1979-01-01

    Device may be used to facilitate testing and fault isolation in teletype and modem systems that are used for communication by people who having hearing disabilities. Unit uses CMOS digital integrated circuitry which may be operated from relatively inexpensive battery of any voltage from 3 to 18 volts.

  9. United States East Coast

    NASA Technical Reports Server (NTRS)

    2002-01-01

    MODIS captured this true-color image of clear skies over the eastern United States on December 22, 2001. To the northeast the country is blanketed with snow, but in this image only the higher elevations of the Appalachian Mountains in eastern West Virginia are dusted with white. Rod dots in Georgia indicate MODIS' detection of fires.

  10. Wyoming Indians, Unit II.

    ERIC Educational Resources Information Center

    Robinson, Terry

    This unit on Wyoming Indians provides concepts, activities, Indian stories, and resources for elementary school students. Indian values and contributions are summarized. Concepts include the incorrectness of the term "Indian," the Indians' democratic society and sophisticated culture, historical events, and conflicts with whites over the land.…

  11. Planter unit test stand

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A planter test stand was developed to evaluate individual row-crop metering units in early 2013. This test stand provided the ability to quantify actual seed metering in terms of population, seed spacing, skips, and multiples over a range of meter RPMs and vacuum pressures. Preliminary data has been...

  12. Wyoming Government, Unit VII.

    ERIC Educational Resources Information Center

    Robinson, Terry

    This unit on Wyoming government presents concepts, activities, and stories for elementary school students. Concepts stress that the functions of government are determined according to the demands, needs, and traditions of the people; each part of government has a special function; as citizens, we should be loyal to the underlying concepts of our…

  13. Flexible sucker rod unit

    SciTech Connect

    Allen, L.F.

    1987-02-03

    This patent describes a deep well having: a. an education tube with an inside diameter extending from the surface of the earth to far below the surface, b. a reciprocating pump housing attached to the bottom of the education tube, c. pump jack means at the surface for reciprocating the pump, d. a light sucker rod connected to the pump jack means and extending into the education tube, and e. a series of heavy sinker bars having a large cross sectional area in the education tube connecting the light sucker rod to the pump; f. an improved integral metal flexible rod unit interconnecting the sinker bars comprising in combination with the above: g. a coupling on each end of the integral metal flexible rod unit connecting the flexible rod unit to the contiguous sinker bar, h. a segment which is flexible as compared to the sinker bars connecting one of the couplings to i. an integral metal bearing adjacent to the other of the couplings, the bearing having j. a cylindrical surface with k. a diameter i. only slightly smaller than the inside diameter of the education tube thereby forming a sliding fit therewith, and ii. greater than the diameter of any other portion of the flexible rod unit and the sinker bar, and l. grooves in the cylindrical surface for the passage of fluid between in the education tube around the bearing.

  14. Line Replaceable Unit Analysis

    NASA Technical Reports Server (NTRS)

    Oepomo, T.; Prouty, T. V.

    1982-01-01

    Shuttle LRU (Line Replaceable Unit) Analysis Program (SLAP) aids in evaluation of LRU interface voltages in Shuttle orbiter electrical system. Slap includes reduced model of Shuttle LRU circuit. Although primarily intended for analysis of Shuttle LRU's SLAP could be adapted for voltage analysis in other situations.

  15. Sickle Cell Unit.

    ERIC Educational Resources Information Center

    Canipe, Stephen L.

    Included in this high school biology unit on sickle cell anemia are the following materials: a synopsis of the history of the discovery and the genetic qualities of the disease; electrophoresis diagrams comparing normal, homozygous and heterozygous conditions of the disease; and biochemical characteristics and population genetics of the disease. A…

  16. Consumer Mathematics. Teaching Units.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh.

    GRADES OR AGES: Secondary school. SUBJECT MATTER: Consumer mathematics including--money management, transportation, probability, swindles and gyps, insurance, housing, taxes, consumer credit, banks, savings, and investments. ORGANIZATION AND PHYSICAL APPEARANCE: The guide is divided into ten parallel units, one for each of the above areas, which…

  17. Theme Unit: Veggie Power.

    ERIC Educational Resources Information Center

    Flagg, Ann

    2000-01-01

    Presents a selection of activities for a cross-curricular unit based on vegetables. Activities address vocabulary, language arts, social studies, and health education. A student reproducible presents a tossed salad game. Game cards can be incorporated into the other activities. A poster describes plant parts that are edible. A sidebar offers…

  18. Outdoorsman, Unit II.

    ERIC Educational Resources Information Center

    Alberta Dept. of Agriculture, Edmonton.

    The second of three units of the 4-H Outdoorsman Program introduces more advanced camping and survival techniques for 4-H members in British Columbia, Alberta, Saskatchewan, and Manitoba. Backpacking, finding food in the wild, making a fire without matches, lashing techniques, axemanship, finding your way (with and without a compass), making a…

  19. Prefixes as Processing Units.

    ERIC Educational Resources Information Center

    Laudanna, Alessandro; And Others

    1994-01-01

    Two experiments assessed the performance of subjects on prefixed nonwords resulting from the incorrect combination of a prefix and a real word in Italian. The results support the view that prefixes may be represented as units of access or representation in the mental lexicon. (41 references) (MDM)

  20. NOVA SCIENCE UNIT 14.

    ERIC Educational Resources Information Center

    1964

    THE MAJOR CONCEPT OF THE UNIT IS THAT SOMETHING MUST BE DONE TO PARTICLES IN ORDER TO STUDY THEM. ATOMS ARE COMPOSED OF TWO KINDS OF CHARGED PARTICLES--PROTONS AND ELECTRONS. ANY DIFFERENCE IN THEIR NUMBERS RESULTS IN A CHARGED BODY. IF ENOUGH CHARGED BODIES ARE PRODUCED, THEY WILL AFFECT CHARGE DETECTORS. CONCLUSIONS CAN BE DRAWN FROM THE…

  1. Borehole seismic unit

    NASA Astrophysics Data System (ADS)

    Seavey, R. W.

    1982-05-01

    Fracture orientation can be measured by using a triaxial geophone package located at the fracture interval within the wellbore. Seismic signals produced by the fracture can be recorded and measured to determine the direction of the fracture. A description of a borehole seismic unit and procedures to accomplish this task are reported.

  2. Theme Unit: Mayflower Math.

    ERIC Educational Resources Information Center

    Rhodes, Mackie

    2001-01-01

    This Thanksgiving theme unit has students learn about mathematics and history by studying the voyage of the Mayflower. Students can study how many children sailed on the Mayflower, how big the ship was, and how long the voyage was. They can also solve Mayflower word problems and create recipes of food the Pilgrims would have eaten. An instructor…

  3. Whale Teaching Unit.

    ERIC Educational Resources Information Center

    Peninsula Humane Society, San Mateo, CA.

    Materials in this teaching unit are designed to foster an interest in whale preservation among intermediate grade and junior high school students. Several readings provide background information on various types of whales and the economic value of whales. Student activities include a true and false game, a crossword, and a mobile. A resource list…

  4. Social Studies Resource Units.

    ERIC Educational Resources Information Center

    Bemiss, Clair W.

    Based on the premise that fundamental solutions to environmental problems must include social solutions, these three resource units are designed to study the interrelation of man and nature as part of the social studies curriculum. A series of inquiry questions are posed with the intent of stimulating students to find solutions to our…

  5. Theme Unit. Horse Sense.

    ERIC Educational Resources Information Center

    Flagg, Ann

    1999-01-01

    This integrated, cross-curricular theme unit has children become immersed in the equine world as they broaden their vocabulary, participate in hands-on science and math, explore art, become aware of the horse's important role in history, and learn about good grooming. A student reproducible, a poetry poster, and a poster on the coloring of horses…

  6. Outdoorsman, Unit III.

    ERIC Educational Resources Information Center

    Alberta Dept. of Agriculture, Edmonton.

    The third and final unit of the 4-H Outdoorsman Program covers the most advanced and challenging campcraft skills for 4-H members in British Columbia, Alberta, Saskatchewan and Manitoba. Survival camping (including building shelters and finding food), in-depth map-reading and orienteering, game management, hiking themes and recordkeeping are all…

  7. Gloucester Marine Biology Unit.

    ERIC Educational Resources Information Center

    Shearer, Sonja; And Others

    Objectives and activities for a field trip study of the seacoast environment of Gloucester, Massachusetts, are outlined in this guide. One phase of a six-week tenth grade biology unit, the field trip features study of tidal pool and salt marsh ecosystems. Specific objectives of the trip relate to observation and identification of various forms of…

  8. Insects. Thematic Unit.

    ERIC Educational Resources Information Center

    Gosnell, Kathee

    This book is a captivating whole-language thematic unit about the study of insects, relating it to our understanding of the past and our hopes for using our knowledge in the present to balance the ecosystem in the future. It contains a wide variety of lesson ideas and reproducible pages designed for use with intermediate students. At its core,…

  9. [Environmental Education Units.

    ERIC Educational Resources Information Center

    Minneapolis Independent School District 275, Minn.

    Two of these three pamphlets describe methods of teaching young elementary school children the principles of sampling. Tiles of five colors are added to a tub and children sample these randomly; using the tiles as units for a graph, they draw a representation of the population. Pooling results leads to a more reliable sample. Practice is given in…

  10. Units that Make It Simple.

    ERIC Educational Resources Information Center

    Rayner-Canham, Geoffrey

    1985-01-01

    The International System of Units (SI) or the metric system contains related units which make science simpler for students and teachers. By emphasizing descriptive units, requiring unit use throughout calculations, and using negative exponents, teachers can help students have a better understanding of energy, pressure, and mass concepts. (DH)

  11. 77 FR 48542 - United States

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-14

    ... Antitrust Division United States v. SG Interests I, Ltd., et al.; Public Comments and Response on the... United States hereby publishes below the United States' Response to Public Comments on the proposed Final Judgment in United States v. SG Interests I, Ltd. et. al., Civil Action No. 12-cv-000395- RPM-MEH,...

  12. 40 CFR 60.3 - Units and abbreviations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...—mole N—newton ng—nanogram—10 −9 gram nm—nanometer—10 −9 meter Pa—pascal s—second V—volt W—watt Ω—ohm µg...—calorie cfm—cubic feet per minute cu ft—cubic feet dcf—dry cubic feet dcm—dry cubic meter dscf—dry...

  13. Contamination analysis unit

    DOEpatents

    Gregg, Hugh R.; Meltzer, Michael P.

    1996-01-01

    The portable Contamination Analysis Unit (CAU) measures trace quantifies of surface contamination in real time. The detector head of the portable contamination analysis unit has an opening with an O-ring seal, one or more vacuum valves and a small mass spectrometer. With the valve closed, the mass spectrometer is evacuated with one or more pumps. The O-ring seal is placed against a surface to be tested and the vacuum valve is opened. Data is collected from the mass spectrometer and a portable computer provides contamination analysis. The CAU can be used to decontaminate and decommission hazardous and radioactive surface by measuring residual hazardous surface contamination, such as tritium and trace organics It provides surface contamination data for research and development applications as well as real-time process control feedback for industrial cleaning operations and can be used to determine the readiness of a surface to accept bonding or coatings.

  14. Contamination analysis unit

    DOEpatents

    Gregg, H.R.; Meltzer, M.P.

    1996-05-28

    The portable Contamination Analysis Unit (CAU) measures trace quantities of surface contamination in real time. The detector head of the portable contamination analysis unit has an opening with an O-ring seal, one or more vacuum valves and a small mass spectrometer. With the valve closed, the mass spectrometer is evacuated with one or more pumps. The O-ring seal is placed against a surface to be tested and the vacuum valve is opened. Data is collected from the mass spectrometer and a portable computer provides contamination analysis. The CAU can be used to decontaminate and decommission hazardous and radioactive surfaces by measuring residual hazardous surface contamination, such as tritium and trace organics. It provides surface contamination data for research and development applications as well as real-time process control feedback for industrial cleaning operations and can be used to determine the readiness of a surface to accept bonding or coatings. 1 fig.

  15. Laser color recording unit

    NASA Astrophysics Data System (ADS)

    Jung, E.

    1984-05-01

    A color recording unit was designed for output and control of digitized picture data within computer controlled reproduction and picture processing systems. In order to get a color proof picture of high quality similar to a color print, together with reduced time and material consumption, a photographic color film material was exposed pixelwise by modulated laser beams of three wavelengths for red, green and blue light. Components of different manufacturers for lasers, acousto-optic modulators and polygon mirrors were tested, also different recording methods as (continuous tone mode or screened mode and with a drum or flatbed recording principle). Besides the application for the graphic arts - the proof recorder CPR 403 with continuous tone color recording with a drum scanner - such a color hardcopy peripheral unit with large picture formats and high resolution can be used in medicine, communication, and satellite picture processing.

  16. Thermal insulated glazing unit

    DOEpatents

    Selkowitz, Stephen E.; Arasteh, Dariush K.; Hartmann, John L.

    1991-01-01

    An improved insulated glazing unit is provided which can attain about R5 to about R10 thermal performance at the center of the glass while having dimensions about the same as those of a conventional double glazed insulated glazing unit. An outer glazing and inner glazing are sealed to a spacer to form a gas impermeable space. One or more rigid, non-structural glazings are attached to the inside of the spacer to divide the space between the inner and outer glazings to provide insulating gaps between glazings of from about 0.20 inches to about 0.40 inches. One or more glazing surfaces facing each thermal gap are coated with a low emissivity coating. Finally, the thermal gaps are filled with a low conductance gas such as krypton gas.

  17. Thermal insulated glazing unit

    DOEpatents

    Selkowitz, S.E.; Arasteh, D.K.; Hartmann, J.L.

    1988-04-05

    An improved insulated glazing unit is provided which can attain about R5 to about R10 thermal performance at the center of the glass while having dimensions about the same as those of a conventional double glazed insulated glazing unit. An outer glazing and inner glazing are sealed to a spacer to form a gas impermeable space. One or more rigid, non-structural glazings are attached to the inside of the spacer to divide the space between the inner and outer glazings to provide insulating gaps between glazings of from about 0.20 inches to about 0.40 inches. One or more glazing surfaces facing each thermal gap are coated with a low emissivity coating. Finally, the thermal gaps are filled with a low conductance gas such as krypton gas. 2 figs.

  18. Regenerable biocide delivery unit

    NASA Technical Reports Server (NTRS)

    Colombo, Gerald V.; Jolly, Clifford D.; Sauer, Richard L.

    1991-01-01

    The Microbial Check Valve (MCV) is used on the Space Shuttle to impart an iodine residual to the drinking water to maintain microbial control. Approximately twenty MCV locations have been identified in the Space Station Freedom design, each with a 90-day life. This translates to 2400 replacement units in 30 years of operation. An in situ regeneration concept has been demonstrated that will reduce this replacement requirement to less than 300 units based on data to date. A totally automated system will result in significant savings in crew time, resupply requirements, and replacement costs. An additional feature of the device is the ability to provide a concentrated biocide source (200 mg/liter of I2) that can be used to superiodinate systems routinely or after a microbial upset.

  19. Planetary gear unit

    SciTech Connect

    Takahashi, S.

    1986-10-07

    This patent describes a planetary gear unit for the transmission of a motor vehicle, comprising: a first planetary gear unit which includes a pinion shaft, a planet pinion rotatably mounted on the pinion shaft, a sun gear engaging the planet pinion, and an arm member supporting the pinion shaft and having an extending portion extending to a point adjacent the sun gear; a thrust washer contacting the arm member, the thrust washer having radiating conduit means formed on a contacting surface thereof so as to communicate an inner circumference of the extending portion of the arm member with the pinion shaft, the pinion shaft having a conduit formed therein so as to communicate with the radiating conduit means with an inner surface of the planet pinion wherein the radiating conduit means further comprises uniform spaced bevel surfaces and grooves in communication with the bevel surfaces.

  20. Laser system preset unit

    DOEpatents

    Goodwin, William L.

    1977-01-01

    An electronic circuit is provided which may be used to preset a digital display unit of a Zeeman-effect layer interferometer system which derives distance measurements by comparing a reference signal to a Doppler signal generated at the output of the interferometer laser head. The circuit presets dimensional offsets in the interferometer digital display by electronically inducing a variation in either the Doppler signal or the reference signal, depending upon the direction of the offset, to achieve the desired display preset.

  1. Applied Meteorology Unit (AMU)

    NASA Technical Reports Server (NTRS)

    Bauman, William; Lambert, Winifred; Wheeler, Mark; Barrett, Joe; Watson, Leela

    2007-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the second quarter of Fiscal Year 2007 (January - March 2007). Tasks reported on are: Obiective Lightning Probability Tool, Peak Wind Tool for General Forecasting, Situational Lightning Climatologies for Central Florida, Anvil Threat Corridor Forecast Tool in AWIPS, Volume Averaqed Heiqht lnteq rated Radar Reflectivity (VAHIRR), Tower Data Skew-t Tool, and Weather Research and Forecastini (WRF) Model Sensitivity Study

  2. Bipartite units of nonlocality

    SciTech Connect

    Forster, Manuel; Wolf, Stefan

    2011-10-15

    Imagine a task in which a group of separated players aim to simulate a statistic that violates a Bell inequality. Given measurement choices the players shall announce an output based solely on the results of local operations--which they can discuss before the separation--on shared random data and shared copies of a so-called unit correlation. In the first part of this paper we show that in such a setting the simulation of any bipartite correlation, not containing the possibility of signaling, can be made arbitrarily accurate by increasing the number of shared Popescu-Rohrlich (PR) boxes. This establishes the PR box as a simple asymptotic unit of bipartite nonlocality. In the second part we study whether this property extends to the multipartite case. More generally, we ask if it is possible for separated players to asymptotically reproduce any nonsignaling statistic by local operations on bipartite unit correlations. We find that nonadaptive strategies are limited by a constant accuracy and that arbitrary strategies on n resource correlations make a mistake with a probability greater or equal to c/n, for some constant c.

  3. Radiation quantities and units

    SciTech Connect

    Not Available

    1980-04-15

    This report supersedes ICRU Report 19. Since ICRU Report 19 was published, a number of discussions have taken place between members of the Report Committee on Fundamental Quantities and Units and other workers in the field. Some of these discussions have resulted in the acceptance of certain modifications in the material set out in Report 19 and these modifications are incorporated in the current report. In addition, there has been some expansion and rearrangement of the material in the earlier report. In line, with providing more didactic material and useful source material for other ICRU reports, the general considerations in subsection 1.A of Report 19 have been expanded and placed in a separate subsection. The additional material includes discussions of four terms that are used in this document - quantity, unit, stochastic, and non-stochastic - along with a brief discussion of the mathematical formalism used in ICRU reports. As in ICRU Report 19, the definitions of quantities and units specifically designed for radiation protection (Part B) are separated from those of the general quantities (Part A). The inclusion of the index concept outlined in ICRU Report 25(4) required an extension of Part B.

  4. Optical Coating Performance and Thermal Structure Design for Heat Reflectors of JWST Electronic Control Unit

    NASA Technical Reports Server (NTRS)

    Quijada, Manuel A.; Threat, Felix; Garrison, Matt; Perrygo, Chuck; Bousquet, Robert; Rashford, Robert

    2008-01-01

    The James Webb Space Telescope (JWST) consists of an infrared-optimized Optical Telescope Element (OTE) that is cooled down to 40 degrees Kelvin. A second adjacent component to the OTE is the Integrated Science Instrument Module, or ISIM. This module includes the electronic compartment, which provides the mounting surfaces and ambient thermally controlled environment for the instrument control electronics. Dissipating the 200 watts generated from the ISIM structure away from the OTE is of paramount importance so that the spacecraft's own heat does not interfere with the infrared light detected from distant cosmic sources. This technical challenge is overcome by a thermal subsystem unit that provides passive cooling to the ISIM control electronics. The proposed design of this thermal radiator consists of a lightweight structure made out of composite materials and low-emittance metal coatings. In this paper, we will present characterizations of the coating emittance, bidirectional reflectance, and mechanical structure design that will affect the performance of this passive cooling system.

  5. Thermal Isolator with Strong Mechanical Support for a Radioisotope Heating Unit

    NASA Astrophysics Data System (ADS)

    Roach, Pat R.; Kittel, Peter; Feller, Jeff; Helvensteijn, Ben

    2004-02-01

    We have developed a suspension system using pre-tensioned titanium alloy wires to support a 1 Watt Radioisotope Heating Unit (RHU) for a mission to Mars. This suspension is very strong in all directions and has quite low thermal conduction between the RHU and its colder surroundings. This will allow the RHU to operate at 250 °C for generating electrical power from an attached thermoelectric converter (TEC) after surviving multiple 300 G impacts on the Martian surface. We have tested the suspension under impact loads that have the same duration as the impacts expected from the air-bag cushions planned for the Mars mission. The suspension survives impacts of 500 G with the RHU canister at room temperature and at 250 °C. We calculate that with the RHU at 250 °C there will be only 86 mW of heat conducted through the support structure. This design in intended for use with multilayer insulation in a good vacuum. We estimate that the conduction through such insulation would be 75 mW. This leaves more than 800 mW of the heat from the RHU to flow through the TEC, yielding more than 40 mW of electrical power.

  6. Musique instrumentale 10-20-30: Instruments a vent et a percussion. (Instrumental Music 10-20-30: Wind and Percussion Instruments. Teaching Guide).

    ERIC Educational Resources Information Center

    Alberta Dept. of Education, Edmonton. Language Services Branch.

    The introduction for this Alberta (Canada) music education guide offers reasons for students to study the fine arts at the secondary school level. A philosophy of music education is presented along with 5 key outcomes and 11 music appreciation expectations for secondary students to attain. The volume features wind and percussion instruments. The…

  7. Power-processing unit

    NASA Technical Reports Server (NTRS)

    Wessel, Frank J. (Inventor); Hancock, Donald J. (Inventor)

    1987-01-01

    Power-processing unit uses AC buses (30, 32) to supply all current dependent needs such as connections (54, 56) to an ion thruster through an inductor (88) and the primary of a transformer (90), to assure limited currents to such loads. Where temperature control is also required, such as to the main discharge vaporizer heater connection (36, 38), switches (100, 102) are serially connected with inductor (96) and the primary of transformer (98). Temperature sensor (104) controls the switches (100, 102) for temperature regulation.

  8. Intensive Care Unit Psychosis

    PubMed Central

    Monks, Richard C.

    1984-01-01

    Patients who become psychotic in intensive care units are usually suffering from delirium. Underlying causes of delirium such as anxiety, sleep deprivation, sensory deprivation and overload, immobilization, an unfamiliar environment and pain, are often preventable or correctable. Early detection, investigation and treatment may prevent significant mortality and morbidity. The patient/physician relationship is one of the keystones of therapy. More severe cases may require psychopharmacological measures. The psychotic episode is quite distressing to the patient and family; an educative and supportive approach by the family physician may be quite helpful in patient rehabilitation. PMID:21279016

  9. Applied Meteorology Unit (AMU)

    NASA Technical Reports Server (NTRS)

    Bauman, William H., Jr.; Crawford, Winifred; Short, David; Barrett, Joe; Watson, Leela

    2008-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the second quarter of Fiscal Year 2008 (January - March 2008). Projects described are: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Peak Wind Tool for General Forecasting, (3) Situational Lightning Climatologies for Central Florida. Phase III, (4) Volume Averaged Height Integrated Radar Reflectivity (VAHIRR), (5) Impact of Local Sensors, (6) Radar Scan Strategies for the PAFB WSR-74C Replacement and (7) WRF Wind Sensitivity Study at Edwards Air Force Base.

  10. Applied Meteorology Unit (AMU)

    NASA Technical Reports Server (NTRS)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2010-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2010 (October - December 2009). A detailed project schedule is included in the Appendix. Included tasks are: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool, Phase III, (3) Peak Wind Tool for General Forecasting, Phase II, (4) Upgrade Summer Severe Weather Tool in Meteorological Interactive Data Display System (MIDDS), (5) Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) Update and Maintainability, (5) Verify 12-km resolution North American Model (MesoNAM) Performance, and (5) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) Graphical User Interface.

  11. Space Flyer Unit (SFU)

    NASA Technical Reports Server (NTRS)

    Ninomiya, T.; Kuriki, K.

    1991-01-01

    The DSN (Deep Space Network) mission support requirements for the Space Flyer Unit (SFU) are summarized. The SFU is an unmanned, reusable, and retrievable free-flying platform for multipurpose use. The SFU spacecraft will carry seven individual experiments to be completed during its mission period. The mission objectives are outlined and the DSN support requirements are defined through the presentation of tables and narratives describing the spacecraft flight profile; DSN support coverage; frequency assignments; support parameters for telemetry, command and support systems; and tracking support responsibility.

  12. Toxic Hazards Research Unit

    NASA Technical Reports Server (NTRS)

    Macewen, J. D.; Vernot, E. H.

    1971-01-01

    The activities of the Toxic Hazards Research Unit (THRU) for the period of June 1970 through May 1971 reviewed. Modification of the animal exposure facilities primarily for improved human safety but also for experimental integrity and continuity are discussed. Acute toxicity experiments were conducted on hydrogen fluoride (HF), hydrogen chloride (HCl), nitrogen dioxide (NO2), and hydrogen cyanide (HCN) both singly and in combination with carbon dioxide (CO). Additional acute toxicity experiments were conducted on oxygen difluoride (OF2) and chlorine pentafluoride (ClF5). Subacute toxicity studies were conducted on methylisobutylketone and dichloromethane (methylene dichloride). The interim results of further chronic toxicity experiments on monomethylhydrazine (MMH) are also described.

  13. Unite and fight.

    PubMed

    Carlisle, D

    10% of Uganda's population is thought to be infected with HIV, with the level of HIV infection reaching 25% in some subpopulations. In the face of such extensive HIV infection, the government of Uganda officially sanctioned the provision of AIDS education, and a campaign to mobilize communities against HIV/AIDS was launched in 1989. Uganda's President Yoweri Museveni wanted to get everyone talking about HIV and AIDS, and to know how to prevent contracting HIV. Over the period 1991-96, HIV prevalence among pregnant women fell from over 12% to just over 8%, and studies indicate that 80-90% of people now know and understand the need to use safer sex practices when having sexual intercourse. 60,000 boy and girl scouts are involved in the Unite project to disseminate safer sex messages among Uganda's youth. Focusing upon abstinence, behavior change, and condoms, the scouts take safer sex messages into schools and churches, where they educate their peers through poetry and traditional songs and dances in dramas about AIDS. The Unite project is funded by the scouting movement in Britain. The materials with which scouts and scout leaders were trained were developed with the assistance of health professionals.

  14. Unite and fight.

    PubMed

    Carlisle, D

    10% of Uganda's population is thought to be infected with HIV, with the level of HIV infection reaching 25% in some subpopulations. In the face of such extensive HIV infection, the government of Uganda officially sanctioned the provision of AIDS education, and a campaign to mobilize communities against HIV/AIDS was launched in 1989. Uganda's President Yoweri Museveni wanted to get everyone talking about HIV and AIDS, and to know how to prevent contracting HIV. Over the period 1991-96, HIV prevalence among pregnant women fell from over 12% to just over 8%, and studies indicate that 80-90% of people now know and understand the need to use safer sex practices when having sexual intercourse. 60,000 boy and girl scouts are involved in the Unite project to disseminate safer sex messages among Uganda's youth. Focusing upon abstinence, behavior change, and condoms, the scouts take safer sex messages into schools and churches, where they educate their peers through poetry and traditional songs and dances in dramas about AIDS. The Unite project is funded by the scouting movement in Britain. The materials with which scouts and scout leaders were trained were developed with the assistance of health professionals. PMID:9423469

  15. First Grade Social Studies Unit.

    ERIC Educational Resources Information Center

    Park Forest Public Schools District 163, IL.

    The main idea of this unit--that many different kinds of families live in the United States and are alike in some ways but different in others--is shaped through an examination of families in three cultural and physical settings. This teaching guide for the unit provides highly detailed suggestions for learning experiences and multimedia…

  16. Creative Coin Combinations. Unit Plans.

    ERIC Educational Resources Information Center

    United States Mint (Dept. of Treasury), Washington, DC.

    This unit of study for grades K-2 focuses on counting coins and coin equivalencies up to 50 cents, making use of a literature connection. The unit provides key words; recommends subject areas and approximate length of time; poses an essential question or problem; provides a unit introduction; notes four individual lessons ((1) For Sale!; (2)…

  17. What's It Worth? Unit Plans.

    ERIC Educational Resources Information Center

    United States Mint (Dept. of Treasury), Washington, DC.

    This hands-on coin unit is for students in grades 1-2. Students play games and work with coin manipulatives to practice coin and value recognition, finding coin combinations, and adding coins. The unit provides keywords; recommends subject areas and approximate length of time; poses an essential question or problem; provides a unit introduction;…

  18. Using SI Units in Mechanics.

    ERIC Educational Resources Information Center

    Meriam, J. L.

    This paper provides an historical account of the development of the International System of Units (SI), a complete listing of these units, and rules concerning their use and proper abbreviation. Ambiguities concerning the use of the system are explained. Appendices contain conversion factors for U.S. - British to SI units along with several…

  19. Snakes: An Integrated Unit Plan.

    ERIC Educational Resources Information Center

    Lawrence, Lisa

    This document presents an integrated unit plan on snakes targeting second grade students. Objectives of the unit include developing concepts of living things, understanding the contribution and importance of snakes to the environment, and making connections between different disciplines. The unit integrates the topic of snakes into the areas of…

  20. Hydrologic Unit Map -- 1974, Minnesota

    USGS Publications Warehouse

    U.S. Geological Survey

    1974-01-01

    This map and accompanying table show Hydrologic Units that are basically hydrographic in nature.  The Cataloging Units shown will supplant the Cataloging Units previously used by the U.S. Geological Survey in its Catalog of Information on Water Data (1966-72).   

  1. Design of hydraulic recuperation unit

    NASA Astrophysics Data System (ADS)

    Jandourek, Pavel; Habán, Vladimír; Hudec, Martin; Dobšáková, Lenka; Štefan, David

    2016-03-01

    This article deals with design and measurement of hydraulic recuperation unit. Recuperation unit consist of radial turbine and axial pump, which are coupled on the same shaft. Speed of shaft with impellers are 6000 1/min. For economic reasons, is design of recuperation unit performed using commercially manufactured propellers.

  2. Metric Units in Primary Schools.

    ERIC Educational Resources Information Center

    Lighthill, M. J.; And Others

    Although this pamphlet is intended as background material for teachers in English primary schools changing to the System International d'Unites (SI units), the form of the metric system being adopted by the United Kingdom, the educational implications of the change and the lists of apparatus suitable for use with children up to 14 years of age are…

  3. Measurements, Physical Quantities, and Units.

    ERIC Educational Resources Information Center

    Wilson, Laurence E.

    1988-01-01

    Explains the significance of the mole as a unit of measure by showing the relationship between physical quantities and their mathematical representations. Offers a summary of the principles of metrology that make creation of physical quantities and units seem reasonable. A table of base physical quantities and units is included. (RT)

  4. 76 FR 23839 - United States

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-28

    ... Federal Register on December 28, 2010, see United States, et al. v. Lucasfilm Ltd., 75 FR 81651; and... Antitrust Division United States v. Lucasfilm Ltd.; Public Comments and Response on Proposed Final Judgment Pursuant to the Antitrust Procedures and Penalties Act, 15 U.S.C. 16(b)-(h), the United States...

  5. 78 FR 4439 - United States

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-22

    ... Antitrust Division United States v. Oklahoma State Chiropractic Independent Physicians Association and Larry..., Stipulation, and Competitive Impact Statement have been filed with the United States District Court for the Northern District of Oklahoma in United States of America v. Oklahoma State Chiropractic...

  6. Learning unit: Thin lenses

    NASA Astrophysics Data System (ADS)

    Nita, L.-S.

    2012-04-01

    Learning unit: Thin lenses "Why objects seen through lenses are sometimes upright and sometimes reversed" Nita Laura Simona National College of Arts and Crafts "Constantin Brancusi", Craiova, Romania 1. GEOMETRIC OPTICS. 13 hours Introduction (models, axioms, principles, conventions) 1. Thin lenses (Types of lenses. Defining elements. Path of light rays through lenses. Image formation. Required physical quantities. Lens formulas). 2. Lens systems (Non-collated lenses. Focalless systems). 3. Human eye (Functioning as an optical system. Sight defects and their corrections). 4. Optical instruments (Characteristics exemplified by a magnifying glass. Paths of light rays through a simplified photo camera. Path of light rays through a classical microscope) (Physics curriculum for the IXth grade/ 2011). This scenario exposes a learning unit based on experimental sequences (defining specific competencies), as a succession of lessons started by noticing a problem whose solution assumes the setup of an experiment under laboratory conditions. Progressive learning of theme objectives are realised with sequential experimental steps. The central cognitive process is the induction or the generalization (development of new knowledge based on observation of examples or counterexamples of the concept to be learnt). Pupil interest in theme objectives is triggered by problem-situations, for example: "In order to better see small objects I need a magnifying glass. But when using a magnifier, small object images are sometimes seen upright and sometimes seen reversed!" Along the way, pupils' reasoning will converge to the idea: "The image of an object through a lens depends on the relative distances among object, lens, and observer". Associated learning model: EXPERIMENT Specific competencies: derived from the experiment model, in agreement with the following learning unit steps I. Evoking - Anticipation: Size of the problem, formulation of hypotheses and planning of experiment. II

  7. United Arab Emirates.

    PubMed

    1985-02-01

    This discussion of the United Arab Emirates focuses on the following: the people; geography; history; government; political conditions; defense; the economy; foreign relations; and relations between the US and the United Arab Emirates. In 1983 the population was estimated at 1,194,000. In 1984 the annual growth rate was negative. Life expectancy is about 60 years. Fewer than 20% of the population are UAE citizens. Indigenous Emiris are Arab; the rest of the population includes significant numbers of other Arabs -- Palestinians, Egyptians, Jordanians, Yemenis, Omanis, as well as many Iranians, Pakistanis, Indians, and West Europeans, especially in Dubai. The UAE is in the eastern Arabian Peninsula, bounded on the north by the Persian Gulf. European and Arab pirates roamed the Trucial Coast area from the 17th century into the 19th century. Early British expeditions against the pirates led to further campaigns against their headquarters. Piracy continued intermittently until 1835, when the shaikhs agreed not to engage in hostilities at sea. Primarily in reaction to the ambitions of other European countries, the UK and the Trucial States established closer bonds in an 1892 treaty. In 1968 the British government announced its decision, reaffirmed in March 1971, to end the treaty relationship with the gulf shaikhdoms. When the British protective treaty with the Trucial Shaikhdoms ended on December 1, they became fully independent. On December 2, 1971, 6 of them entered into a union called the United Arab Emirates. The 7th, Ras al-Khaimah, joined in early 1972. Administratively, the UAE is a loose federation of 7 emirates, each with its own ruler. The pace at which local government in each emirate is evolving, from traditional to modern, is set primarily by the ruler. Under the provisional constitution of 1971, each emirate reserves considerable powers, including control over mineral rights, taxation, and police powers. In this milieu, the growth of federal powers has

  8. United Arab Emirates.

    PubMed

    1985-02-01

    This discussion of the United Arab Emirates focuses on the following: the people; geography; history; government; political conditions; defense; the economy; foreign relations; and relations between the US and the United Arab Emirates. In 1983 the population was estimated at 1,194,000. In 1984 the annual growth rate was negative. Life expectancy is about 60 years. Fewer than 20% of the population are UAE citizens. Indigenous Emiris are Arab; the rest of the population includes significant numbers of other Arabs -- Palestinians, Egyptians, Jordanians, Yemenis, Omanis, as well as many Iranians, Pakistanis, Indians, and West Europeans, especially in Dubai. The UAE is in the eastern Arabian Peninsula, bounded on the north by the Persian Gulf. European and Arab pirates roamed the Trucial Coast area from the 17th century into the 19th century. Early British expeditions against the pirates led to further campaigns against their headquarters. Piracy continued intermittently until 1835, when the shaikhs agreed not to engage in hostilities at sea. Primarily in reaction to the ambitions of other European countries, the UK and the Trucial States established closer bonds in an 1892 treaty. In 1968 the British government announced its decision, reaffirmed in March 1971, to end the treaty relationship with the gulf shaikhdoms. When the British protective treaty with the Trucial Shaikhdoms ended on December 1, they became fully independent. On December 2, 1971, 6 of them entered into a union called the United Arab Emirates. The 7th, Ras al-Khaimah, joined in early 1972. Administratively, the UAE is a loose federation of 7 emirates, each with its own ruler. The pace at which local government in each emirate is evolving, from traditional to modern, is set primarily by the ruler. Under the provisional constitution of 1971, each emirate reserves considerable powers, including control over mineral rights, taxation, and police powers. In this milieu, the growth of federal powers has

  9. Last call for units

    NASA Astrophysics Data System (ADS)

    Randall, Stuart; Rosen, Ronald; Jones, Clifford; Bean, Leonard W.; Lane, Frank

    2009-09-01

    I am writing with regard to Kevin McGuigan's definition of the darwin unit, Dw, as "the mathematical probability of one undergraduate (or faculty) fatality per practical if the person in question is left to their own devices" (July p60). Although it is clear how the loss of genitals in a laboratory accident would result in a student's removal from the gene pool, McGuigan does not explain how the loss of finger (a 1 mDw event, he suggests) might impede procreation in the slightest. Perhaps McGuigan is confusing Darwin's evolution by natural selection with Lamarck's discredited theory of evolution by the inheritance of acquired characteristics. If so, the gulf between physicists and biologists seems as wide as ever.

  10. New undersea research unit

    NASA Astrophysics Data System (ADS)

    The first cold-water activity under the National Oceanic and Atmospheric Administration's (NOAA) National Undersea Research Program will begin in the Gulf of Maine in August, according to NOAA Administrator John V. Byrne. The prime objective of the new activity will be to survey ocean dumping grounds and to study the productivity of the area's valuable fish resources. (The World Court is currently deciding on the fishing boundary between the United States and Canada in and around the Gulf of Maine.)Detailed maps of dumpsites off Portland, Maine, and Boston, Mass., will be made, followed by an assessment of the effects dumping has on marine life. Dredge spoil is dumped offshore from Portland; a variety of material—from dredge spoil to munitions—is dumped off Boston.

  11. Composite material impregnation unit

    NASA Technical Reports Server (NTRS)

    Wilkinson, S. P.; Marchello, J. M.; Johnston, N. J.

    1993-01-01

    This memorandum presents an introduction to the NASA multi-purpose prepregging unit which is now installed and fully operational at the Langley Research Center in the Polymeric Materials Branch. A description of the various impregnation methods that are available to the prepregger are presented. Machine operating details and protocol are provided for its various modes of operation. These include, where appropriate, the related equations for predicting the desired prepreg specifications. Also, as the prepregger is modular in its construction, each individual section is described and discussed. Safety concerns are an important factor and a chapter has been included that highlights the major safety features. Initial experiences and observations for fiber impregnation are described. These first observations have given great insight into the areas of future work that need to be addressed. Future memorandums will focus on these individual processes and their related problems.

  12. Simulation and Optimization of Vacuum Swing Adsorption Units for Spacesuit Carbon Dioxide and Humidity Control

    NASA Technical Reports Server (NTRS)

    Swickrath, Michael J.; Anderson, Molly; McMillin, Summer; Broerman, Craig

    2011-01-01

    Controlling carbon dioxide (CO2) and humidity levels in a spacesuit is critical to ensuring both the safety and comfort of an astronaut during extra-vehicular activity (EVA). Traditionally, this has been accomplished utilizing either non-regenerative lithium hydroxide (LiOH) or regenerative but heavy metal oxide (MetOx) canisters which pose a significant weight burden. Although such technology enables air revitalization, the volume requirements to store the waste canisters as well as the mass to transport multiple units become prohibitive as mission durations increase. Consequently, motivation exists toward developing a fully regenerative technology for spacesuit environmental control. The application of solid amine materials with vacuum swing adsorption technology has shown the capacity to control CO2 while concomitantly managing humidity levels through a fully regenerative cycle eliminating constraints imposed with the traditional technologies. Prototype air revitalization units employing this technology have been fabricated in both a rectangular and cylindrical geometry. Experimental results for these test articles have been collected and are described herein. In order to accelerate the developmental efforts, an axially-dispersed plug flow model with an accompanying energy balance has been established and correlated with the experimental data. The experimental and simulation results display good agreement for a variety of flow rates (110-170 ALM), replicated metabolic challenges (100-590 Watts), and atmosphere pressures under consideration for the spacesuit (248 and 760 mm Hg). The testing and model results lend insight into the operational capabilities of these devices as well as the influence the geometry of the device has on performance. In addition, variable metabolic profiles were imposed on the test articles in order to assess the ability of the technology to transition to new metabolic conditions. The advent of the model provides the capacity to apply

  13. [United theory of aging].

    PubMed

    Trubitsyn, A G

    2012-01-01

    In attempts to develop a means of life prolongation the humankind has created more than three hundred theories of the aging; each of them offers the original cause of aging. However, none of them has given practical result by now. The majority of the theories have now only historical interest. There are several different theories that are mainly under consideration currently. They are based on reliable, proven evidence: the free radical theory, the protein error theory, the replicative senescence theory, the theory of reparation weakening, the immunological theory, several versions of neuroendocrinal theories, and programmed aging theory. The theory presented here is based on conception that the life as the phenomenon represents many of the interconnected physical and chemical processes propelled by energy of the mitochondrial bioenergetical machine. Gradual degradation of all vital processes is caused by the programmed decrease in level of bioenergetics. This theory unites all existing theories of aging constructed on authentic facts: it is shown, that such fundamental phenomena accompanying aging process as the increase in level of reactive oxygen species (ROS), the decrease in the general level of protein synthesis, the limitation of cellular dividing (Haiflick limit), decrease in efficiency of reparation mechanisms are caused by bioenergetics attenuation. Each of these phenomena in turn generates a number of harmful secondary processes. Any of the theories bases on one of these destructive phenomena or their combination. Hence, each of them describes one of sides of process of the aging initially caused by programmed decrease of level of bioenergetics. This united theory gives the chance to understand the nature of aging clock and explains a phenomenon of increase in longevity at the condition of food restriction. Failures of attempts to develop means from aging are explained by that the manipulations with the separate secondary phenomena of attenuation of

  14. Vector processing unit

    SciTech Connect

    Garcia, L.C.; Tjon-Pian-Gi, D.C.; Tucker, S.G.; Zajac, M.W.

    1988-12-13

    This patent describes a data processing system comprising: memory means for storing instruction words of operands; a central processing unit (CPU) connected to the memory means for fetching and decoding instructions and controlling execution of instructions, including transfer of operands to and from the memory means, the control of execution of instructions is effected by a CPU clock and microprogram control means connected to the CPU clock for generating periodic execution control signals in synchronism with the CPU clock; vector processing means tightly coupled to the CPU for effecting data processing on vector data; and interconnection means, connecting the CPU and the vector processing means, including operand transfer lines for transfer of vector data between the CPU and the vector processing means, control lines, status lines for signalling conditions of the vector processor means to the CPU, and a vector timing signal line connected to one of the execution control signals from the microprogram control means, whereby the vector processing means receives periodic execution control signals at the clock rate and is synchronized with the CPU clock on a clock pulse by clock pulse basis during execution of instructions.

  15. United sail windmill

    SciTech Connect

    Labrador, G.A.

    1988-07-12

    This windmill provides low cost energy out of the wind in the form of compressed air, etc, by maximizing wind-contact at the least cost construction and maintenance, at the least cost of project site - making the ''Output/Cost Ratio'' very high. This is done by making the sails very large using light fabrics with aluminum or bamboo frames forming a square face, supported by light strong ropes, by arranging the sails on a single file close to one after the other at erect posture free to clip to the right or to the left, forming a long procession line transverse to the wind which is in close loop with another long procession line parallel to it but moving to the opposite direction, to produce a very large windmill without the need of additional set up units of windmills; by carrying the large sails high about the ground for better wind-contact thru a two level Aerial Cable Railway by means of a deep-groove roller wheel attached to the top end and to the bottom end of each sail-mast; by separating the two parallel lines of sails at least 100 feet apart for better wind-contact thru the use of set of three Terminal Gear Wheels at a Half-Hexagonal formation that hold the end loops of the Power Cable Chain being tugged by each sail; by making the windmill work during strong winds and storing the energy in compressed air tunnels, elevated water.

  16. Flameless nitrogen skid unit

    SciTech Connect

    Loesch, S.B.; John, J.C.; Mints, D.K.

    1984-03-27

    A flameless nitrogen vaporizing unit includes a first internal combustion engine driving a nitrogen pump through a transmission. A second internal combustion engine drives three hydraulic oil pumps against a variable back pressure so that a variable load may be imposed upon the second engine. Liquid nitrogen is pumped from the nitrogen pump driven by the first engine into a first heat exchanger where heat is transferred from exhaust gases from the first and second internal combustion engines to the liquid nitrogen to cause the nitrogen to be transformed into a gaseous state. The gaseous nitrogen then flows into a second heat exchanger where it is superheated by an engine coolant fluid to heat the gaseous nitrogen to essentially an ambient temperature. The superheated nitrogen is then injected into the well. The engine coolant fluid flows in a coolant circulation system. Heat is transferred to the coolant fluid directly from the internal combustion engine. Heat is also provided to the coolant fluid from lubrication oil pumped by the three pumps attached to the second internal combustion engine. The coolant fluid circulating system includes a comingling chamber for comingling warmer coolant fluid flowing from the internal combustion engines to the second heat exchanger with cooler coolant fluids flowing from the second heat exchanger to the internal combustion engines. Methods of vaporizing nitrogen are also disclosed.

  17. United States West Coast

    NASA Technical Reports Server (NTRS)

    2002-01-01

    On Thursday (Feb. 14, 2002), the cloud cover that often overshadows the western United States this time of year broke to provide those at the Olympic Games with a beautiful day. The nearly cloud-free day was captured by the Moderate-resolution Imaging Spectroradiometer (MODIS), flying aboard NASAs Terra spacecraft. A thick layer of snow blankets northernmost Nevada, northern Utah, most of Idaho and western Wyoming. The snow surrounds and highlights Utahs Great Salt Lake. Just south of the lake, clouds can be seen hovering over southern Utah. (In general, clouds appear streaky and uneven on a satellite image, and snow cover appears solid with definable borders.) North of the Great Salt Lake, one can clearly discern the light gray Northern Rocky Mountains cutting through Idaho and up into Canada. Moving southwest, the spine-like Sierra Nevada mountains separate the greenery of Southern California from the brown deserts of Arizona and Nevada. Credit: Jacques Descloitres, MODIS Land Rapid Response Team, NASA/GSFC

  18. Fireplace heating unit

    SciTech Connect

    Henderson, L.L.

    1982-10-19

    An efficient heating unit for ready installation in any standard fireplace includes a refractory lined fire box contained within an outer shell to form a heat exchanger between hot gaseous fuel combustion products and living space air entering the jacket space between the walls of the fire box and the outer shell in a continuous convection cycle. Heated air re-enters the living space through a grill above the fire box and fire box flue maze. The flue maze or manifold forms a radiator of great surface area which projects into the living space immediately below the heated air grill and the maze is vented into the chimney by two nonadjustable and one adjustable vents which are sealed from the air passages of the heat exchanger. Lockable and adjustably vented doors at the front of the fire box are provided. A three piece face plate formed of thin metal having thermal contact with both the fire box and heat exchanger shell maximizes heat radiation into the living space.

  19. Biobank Report: United Kingdom.

    PubMed

    Kaye, Jane; Bell, Jessica; Briceno, Linda; Mitchell, Colin

    2016-03-01

    The United Kingdom is a leader in genomics research, and the presence of numerous types of biobanks and the linking of health data and research within the UK evidences the importance of biobank-based research in the UK. There is no biobank-specific law in the UK and research on biobank materials is governed by a confusing set of statutory law, common law, regulations, and guidance documents. Several layers of applicable law, from European to local, further complicate an understanding of privacy protections. Finally, biobanks frequently contain data in addition to the samples; the legal framework in the UK generally differentiates between data and samples and the form of the data affects the applicability of legal provisions. Biobanks must be licensed by the Human Tissue Authority; certain projects must be reviewed by Research Ethics Committees, and all projects are encouraged to be reviewed by them. Data Access Committees in biobanks are also common in the UK. While this confusing array of legal provisions leaves privacy protections in biobanking somewhat unclear, changes at the EU level may contribute to harmonization of approaches to privacy. PMID:27256127

  20. Unit pockmarks associated with Lophelia coral reefs off mid-Norway: more evidence of control by `fertilizing' bottom currents

    NASA Astrophysics Data System (ADS)

    Hovland, Martin; Jensen, Sigmund; Indreiten, Tore

    2012-12-01

    High-resolution topographic mapping of Norwegian deep-water Lophelia coral reefs and their immediate surrounding seafloor has disclosed striking associations with small (<5 m diameter) `unit' pockmarks. A total of four study areas with Lophelia reefs and unit pockmarks are here described and discussed. At the large Fauna reef, which spans 500 m in length and 100 m in width (25 m in height), there is a field of 184 unit pockmarks occurring on its suspected upstream side. Three other, intermediate-sized Morvin reefs are associated with small fields of unit pockmarks situated upstream of live Lophelia colonies. For two of the latter locations, published data exist for geochemical and microbial analyses of sediment and water samples. Results indicate that these unit pockmarks are sources of light dissolved hydrocarbons for the local water mass, together with nutrient-rich pore waters. It is suggested that the `fertilized' seawater flows with the prevailing bottom current and feeds directly into the live portion of the Lophelia reefs. With an estimated growth rate of ~1 cm per year for the Morvin Lophelia corals, it would take between 1,000 and 2,000 years for the reefs to colonize the closest unit pockmarks, currently occurring 10-20 m from their leading (live) edges.

  1. Generating Basic Units with XML

    NASA Astrophysics Data System (ADS)

    Gass, J.; Shaya, E.; Thomas, B.; Blackwell, J.; Cheung, C.

    2000-12-01

    A fundamental characteristic of any scientific data is its physical units. Unit comparisons and conversions are required in order to understand the meaning of the data and whether or not certain operations on the data are meaningful. For example, only data with equivalent units should be merged. Intelligent query of distributed systems, such as is envisioned for the NVO, will need to integrate or merge data with mixed conventions of units. It would be desirable to provide a standard process to enable machine understanding of units. We present a solution to this problem using XML entities. Our solution features a flexibility to encompass current unit systems, ease of human use, and interoperability (XML/MathML based) between heterogeneous operating systems.

  2. Six Week Slavery Novel Unit.

    ERIC Educational Resources Information Center

    Jones, Darolyn Lyn

    Developed in conjunction with a graduate course and used in classrooms with all types of learners, this paper presents a 6-week unit of study on slavery based on two adolescent novels--"NIGHTJOHN" by Gary Paulson and "My Name Is not Angelica" by Scott O'Dell. After a brief introduction to the unit, the paper presents the 14 activities of the unit:…

  3. GPS Metric Tracking Unit

    NASA Technical Reports Server (NTRS)

    2008-01-01

    As Global Positioning Satellite (GPS) applications become more prevalent for land- and air-based vehicles, GPS applications for space vehicles will also increase. The Applied Technology Directorate of Kennedy Space Center (KSC) has developed a lightweight, low-cost GPS Metric Tracking Unit (GMTU), the first of two steps in developing a lightweight, low-cost Space-Based Tracking and Command Subsystem (STACS) designed to meet Range Safety's link margin and latency requirements for vehicle command and telemetry data. The goals of STACS are to improve Range Safety operations and expand tracking capabilities for space vehicles. STACS will track the vehicle, receive commands, and send telemetry data through the space-based asset, which will dramatically reduce dependence on ground-based assets. The other step was the Low-Cost Tracking and Data Relay Satellite System (TDRSS) Transceiver (LCT2), developed by the Wallops Flight Facility (WFF), which allows the vehicle to communicate with a geosynchronous relay satellite. Although the GMTU and LCT2 were independently implemented and tested, the design collaboration of KSC and WFF engineers allowed GMTU and LCT2 to be integrated into one enclosure, leading to the final STACS. In operation, GMTU needs only a radio frequency (RF) input from a GPS antenna and outputs position and velocity data to the vehicle through a serial or pulse code modulation (PCM) interface. GMTU includes one commercial GPS receiver board and a custom board, the Command and Telemetry Processor (CTP) developed by KSC. The CTP design is based on a field-programmable gate array (FPGA) with embedded processors to support GPS functions.

  4. Apollo Telescope Mount Thermal Unit

    NASA Technical Reports Server (NTRS)

    1970-01-01

    The Apollo Telescope Mount (ATM) was designed and developed by the Marshall Space Flight Center (MSFC) and served as the primary scientific instrument unit aboard Skylab (1973-1979). The ATM consisted of eight scientific instruments as well as a number of smaller experiments. This image is of the ATM thermal unit being tested in MSFC's building 4619. The thermal unit consisted of an active fluid-cooling system of water and methanol that was circulated to radiators on the outside of the canister. The thermal unit provided temperature stability to the ultrahigh resolution optical instruments that were part of the ATM.

  5. Environmental Engineering Unit Operations and Unit Processes Laboratory Manual.

    ERIC Educational Resources Information Center

    O'Connor, John T., Ed.

    This manual was prepared for the purpose of stimulating the development of effective unit operations and unit processes laboratory courses in environmental engineering. Laboratory activities emphasizing physical operations, biological, and chemical processes are designed for various educational and equipment levels. An introductory section reviews…

  6. The Executive Process, Grade Eight. Resource Unit (Unit III).

    ERIC Educational Resources Information Center

    Minnesota Univ., Minneapolis. Project Social Studies Curriculum Center.

    This resource unit, developed by the University of Minnesota's Project Social Studies, introduces eighth graders to the executive process. The unit uses case studies of presidential decision making such as the decision to drop the atomic bomb on Hiroshima, the Cuba Bay of Pigs and quarantine decisions, and the Little Rock decision. A case study of…

  7. FACILITY 219, CARTER UNIT, UNIT 318, INTERIOR OF MASTER BEDROOM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FACILITY 219, CARTER UNIT, UNIT 318, INTERIOR OF MASTER BEDROOM (FACING 6TH ST) SHOWING CEILING/ WALL INTERSECTION AT EXTERIOR WALL. - U.S. Naval Base, Pearl Harbor, Housing Area 1, Fourplex Type, Bounded by Kamehameha Highway, Plantation Drive, South Avenue, Pearl City, Honolulu County, HI

  8. CARPORT OF UNIT B WITH THE AREA BETWEEN UNITS TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CARPORT OF UNIT B WITH THE AREA BETWEEN UNITS TO THE RIGHT. VIEW FACING NORTH - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Duplex Type 1, Acacia Road, Birch Circle, and Cedar Drive, Pearl City, Honolulu County, HI

  9. OBLIQUE VIEW OF UNIT B. THE SPACE BETWEEN UNITS IS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OBLIQUE VIEW OF UNIT B. THE SPACE BETWEEN UNITS IS ON THE RIGHT. VIEW FACING NORTHWEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Duplex Type 1, Acacia Road, Birch Circle, and Cedar Drive, Pearl City, Honolulu County, HI

  10. OBLIQUE VIEW OF UNIT A. THE SPACE BETWEEN UNITS IS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OBLIQUE VIEW OF UNIT A. THE SPACE BETWEEN UNITS IS ON THE LEFT. VIEW FACING NORTHEAST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Duplex Type 1, Acacia Road, Birch Circle, and Cedar Drive, Pearl City, Honolulu County, HI

  11. CARPORT OF UNIT B. THE SPACE BETWEEN UNITS IS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CARPORT OF UNIT B. THE SPACE BETWEEN UNITS IS IN THE BACKGROUND AT LEFT. VIEW FACING SOUTH - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Duplex Type 1, Acacia Road, Birch Circle, and Cedar Drive, Pearl City, Honolulu County, HI

  12. Developing a Solar Experiment Unit.

    ERIC Educational Resources Information Center

    Ting, Kuan-Chong

    1983-01-01

    Suggesting that selected research activities be integrated into engineering technology programs to give students experiences in new technology, this article discusses a project incorporating teaching, research, and service. A photograph and description of the solar experiment unit resulting from the project are provided. The unit runs on air,…

  13. Landforms of the United States.

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    One of a series of general interest publications on science topics, the booklet provides those interested in landforms of the United States with a nontechnical introduction to the subject. Separate sections examine deposital versus erosional landforms in the central stable region of the United States, the Appalachian Highlands, the Ozark Region,…

  14. Edison Home Community Study Unit.

    ERIC Educational Resources Information Center

    Lee County School District, Ft. Myers, FL. Dept. of Environmental Education and Instructional Development Services.

    History is not merely events that occurred in the past. The past has influenced the present, as the present will influence the future. The purpose of this community study unit is to provide fourth grade students with an opportunity to investigate some of the history of Lee County, Florida. The unit's focus is on Thomas Edison, who built a home in…

  15. Unit 903: Approaches to Grammar.

    ERIC Educational Resources Information Center

    Minnesota Univ., Minneapolis. Center for Curriculum Development in English.

    This unit is intended to give ninth-grade students a brief survey of the changes in the study of language from the time of the Greeks to the present. Organized to proceed from the teacher's introduction of a subject to class examination and discussion of an excerpt from a grammarian's work, the unit focuses on the belief that a grammarian's…

  16. NOVA SCIENCE UNIT 1. MEASUREMENT.

    ERIC Educational Resources Information Center

    Broward County Schools, Fort Lauderdale, FL.

    A SCIENCE UNIT ON MEASUREMENT IS PRESENTED. INCLUDED ARE AN INTRODUCTION TO THE METRIC SYSTEM AND SOME TOOLS OF MEASUREMENT. STUDENTS ARE GIVEN A HOMEMADE SYSTEM OF MEASUREMENT WHICH UTILIZES A GRAIN OF RICE AS ITS BASIC UNIT. THE STUDENTS ARE GIVEN EXPERIENCES WITH THE METRIC SYSTEM. THROUGH THESE EXPERIENCES, THE STUDENTS SEE THE NEED FOR…

  17. International Relations: Library Instruction Unit.

    ERIC Educational Resources Information Center

    Hall, Cathie

    In support of the United States Naval Academy's program in international relations, library reference staff developed an instruction unit featuring appropriate research guides and a videotape produced at the Naval Academy Educational Resource Center. The videotape illustrates a sample search strategy and then highlights the use of four basic…

  18. Science Unit Plans. PACE '94.

    ERIC Educational Resources Information Center

    Schoon, Kenneth J., Ed.; Wiles, Clyde A., Ed.

    This booklet contains mathematics unit plans for Biology, Chemistry, and Physical Science developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each unit plan contains suggested timing, objectives, skills to be acquired, workplace relationships, learning activities with suggested…

  19. Enrollment Management in Academic Units

    ERIC Educational Resources Information Center

    DeBiaso, Nick

    2012-01-01

    This study provides an understanding of how administrative leaders make decisions regarding enrollment management within academic units at a major research university in the southwestern United States. Key enrollment management functions of recruiting, admissions, marketing, orientation, financial aid/scholarships, academic advising, student…

  20. Climates of the United States.

    ERIC Educational Resources Information Center

    Baldwin, John L.

    This document is designed to provide basic information about the climates of the United States and the causes of these climates. Events of interest in the climatological history of the United States are described and illustrated by many maps, charts and diagrams. The booklet has three major parts. Part I discusses climate and climate control in…

  1. Mathematics Unit Plans. PACE '94.

    ERIC Educational Resources Information Center

    Wiles, Clyde A., Ed.; Schoon, Kenneth J., Ed.

    This booklet contains mathematics unit plans for Algebra 1, Geometry, Math for Technology, Mathematical Problem Solving, and Pre-Algebra developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each unit plan contains suggested timing, objectives, skills to be acquired, workplace…

  2. Multicultural Mini-Units. Elementary.

    ERIC Educational Resources Information Center

    Flora, Sherrill B.

    The teaching mini-units in this teacher's guide are designed for use with elementary level students. Thematic study units are given for each of the following countries or continents: Africa, Australia, Brazil, Canada, China, England, France, Germany, Greece, India, Israel, Italy, Japan, Mexico, Netherlands, Russia, Spain, Sweden, Thailand, and the…

  3. Multichannel electrochemical microbial detection unit

    NASA Technical Reports Server (NTRS)

    Wilkins, J. R.; Young, R. N.; Boykin, E. H.

    1978-01-01

    The paper describes the design and capabilities of a compact multichannel electrochemical unit devised to detect and automatically indicate detection time length of bacteria. By connecting this unit to a strip-chart recorder, a permanent record is obtained of the end points and growth curves for each of eight channels. The experimental setup utilizing the multichannel unit consists of a test tube (25 by 150 mm) containing a combination redox electrode plus 18 ml of lauryl tryptose broth and positioned in a 35-C water bath. Leads from the electrodes are connected to the multichannel unit, which in turn is connected to a strip-chart recorder. After addition of 2.0 ml of inoculum to the test tubes, depression of the push-button starter activates the electronics, timer, and indicator light for each channel. The multichannel unit is employed to test tenfold dilutions of various members of the Enterobacteriaceae group, and a typical dose-response curve is presented.

  4. Geysers Unit 18

    SciTech Connect

    Finney, John P.

    1980-12-01

    aversion, SDG&E still remains one of the best potential markets for any energy producer. A recent article in FORBES MAGAZINE found that SDG&E had the third highest price per kilowatt of any utility in the country--5.9{cents} per kilowatt hour for commercial customers. That was in March, 1980. Energy cost adjustment clause increases resulted in an average commercial price per kilowatt hour of 7.2{cents} in May. In July it is expected to climb to 9.2{cents}. SDG&E's rate territory continues to expand at the rate of 5% annually and it is located just over 100 miles from a major source of geothermal heat in the Imperial Valley. But today, SDG&E has no commercial geothermal heat or power purchase contracts with domestic producers. You may ask, ''Why not?'' With no incentive to spend its own money and with a high growth rate, what is SDG&E doing to obtain capacity for its existing and future customers? At the present time, most of SDG&E's capital expenditure for generation is going to the construction of San Onofre Units 2 and 3 , a nuclear project which has been under way for ten years and which is expected to start generating commercial power in 1982 and 1983. San Onofre 2 and 3 will add 440 MW of capacity from a reliable, proven generating technology to SDG&E's system.

  5. 7 CFR 1160.104 - United States.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 9 2014-01-01 2013-01-01 true United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the United......

  6. 7 CFR 1160.104 - United States.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the United......

  7. Assessment and mapping of slope stability based on slope units: A case study in Yan'an, China

    NASA Astrophysics Data System (ADS)

    Zhuang, Jianqi; Peng, Jianbing; Xu, Yonglong; Xu, Qiang; Zhu, Xinghua; Li, Wei

    2016-09-01

    Precipitation frequently triggers shallow landslides in the Loess Plateau of Shaanxi, China, resulting in loss of life, damage to gas and oil routes, and destruction of transport infrastructure and farmland. To assess the possibility of shallow landslides at different precipitation levels, a method to draw slope units and steepest slope profiles based on ARCtools and a new method for calculating slope stability are proposed. The methods were implemented in a case study conducted in Yan'an, north-west China. High resolution DEM (Digital Elevation Model) images, soil parameters from in-situ laboratory measurements and maximum depths of precipitation infiltration were used as input parameters in the method. Next, DEM and reverse DEM were employed to map 2146 slope units in the study area, based on which the steepest profiles of the slope units were constructed. Combining analysis of the water content of loess, strength of the sliding surface, its response to precipitation and the infinite slope stability equation, a new equation to calculate infinite slope stability is proposed to assess shallow landslide stability. The slope unit stability was calculated using the equation at 10-, 20-, 50- and 100-year return periods of antecedent effective precipitation. The number of slope units experiencing failure increased in response to increasing effective antecedent rainfall. These results were validated based on the occurrence of landslides in recent decades. Finally, the applicability and limitations of the model are discussed.

  8. 46 CFR 30.10-20 - Deadweight or DWT-TB/ALL.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at the load waterline corresponding to the summer freeboard assigned according to 46...

  9. 46 CFR 30.10-20 - Deadweight or DWT-TB/ALL.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at the load waterline corresponding to the summer freeboard assigned according to 46...

  10. 46 CFR 30.10-20 - Deadweight or DWT-TB/ALL.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... the lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at the load waterline corresponding to the summer freeboard assigned according to 46...

  11. 46 CFR 30.10-20 - Deadweight or DWT-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the lightweight displacement and the total displacement of a vessel measured in water of specific gravity 1.025 at the load waterline corresponding to the summer freeboard assigned according to 46...

  12. Infrared variability of three hot stars on a time scale of 10-20 years

    NASA Astrophysics Data System (ADS)

    Taranova, O. G.; Shenavrin, V. I.

    2015-03-01

    Long-term (1994-2014) near-infrared observations of P Cyg, kDra, and BUTau are analyzed. It is shown that the observed brightness and color variations in P Cyg and k Dra can be explained by variations in the parameters of the stars themselves and their ionized circumstellar shells, whose excitation requires from 5 to 15% of the star's luminosity. The emission from BU Tau in the range 1.25-3.5 µm mimics blackbody radiation, and its variability is a consequence of variations in the star's temperature and, as a result, its radius and luminosity. No excess emission from BU Tau that could be associated with an additional source has been detected.

  13. Japanese Language and Culture 10-20-30: Guide to Implementation.

    ERIC Educational Resources Information Center

    Alberta Learning, Edmonton (Canada). Curriculum Standards Branch.

    This teacher's guide provides an innovative program of studies for teaching Japanese at the secondary level, featuring a content-based curriculum, an integrated approach, results (outcomes)-based orientation, and the use of language for effective interaction. This guide provides teachers with suggestions for designing and planning a Japanese…

  14. 46 CFR 38.10-20 - Liquid level gaging devices-TB/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: Provided, That such glasses shall be made of high strength material suitable for the operating temperatures... service; or, (2) Within the operating temperature range for tanks operating below atmospheric...

  15. French Language Arts, 10-20-30: Programme d'etudes.

    ERIC Educational Resources Information Center

    Leduc, Denise; Mariez, Jean-Marie

    The Alberta (Canada) curriculum for 10th, 11th, and 12th grade French immersion instruction is presented. An introductory section describes the rationale and objectives of the program and provides a brief bibliography. The next section charts the types of discourse on which the curriculum focuses within each language skill area (listening,…

  16. 46 CFR 31.10-20 - Definitions relating to hull examinations-T/B ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... examination of all accessible parts of the vessel's underwater body and all through-hull fittings. (b... accomplished as specified in parts 38 and 151 of this chapter respectively. (d) Underwater survey means the examination, while the vessel is afloat, of all accessible parts of the vessel's underwater body and...

  17. 46 CFR 59.10-20 - Patches in shells and tube sheets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service... inside the drum or shell and sealed against leakage by welding. Such plates shall have a diameter of at... wasted portion with a new section. The ligaments between the tube holes may be joined by means of...

  18. 46 CFR 59.10-20 - Patches in shells and tube sheets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service... inside the drum or shell and sealed against leakage by welding. Such plates shall have a diameter of at... wasted portion with a new section. The ligaments between the tube holes may be joined by means of...

  19. 46 CFR 59.10-20 - Patches in shells and tube sheets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service... inside the drum or shell and sealed against leakage by welding. Such plates shall have a diameter of at... wasted portion with a new section. The ligaments between the tube holes may be joined by means of...

  20. 46 CFR 59.10-20 - Patches in shells and tube sheets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service... inside the drum or shell and sealed against leakage by welding. Such plates shall have a diameter of at... wasted portion with a new section. The ligaments between the tube holes may be joined by means of...

  1. 46 CFR 59.10-20 - Patches in shells and tube sheets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... BOILERS, PRESSURE VESSELS AND APPURTENANCES Welding Repairs to Boilers and Pressure Vessels in -Service... inside the drum or shell and sealed against leakage by welding. Such plates shall have a diameter of at... wasted portion with a new section. The ligaments between the tube holes may be joined by means of...

  2. Simulation and Optimization of Vacuum Swing Adsorption Units for Spacesuit Carbon Dioxide and Humidity Control

    NASA Technical Reports Server (NTRS)

    Swickrath, Michael J.; Anderson, Molly; McMillin, Summer; Broerman, Craig

    2010-01-01

    Controlling carbon dioxide (CO2) and humidity levels in a spacesuit is critical to ensuring both the safety and comfort of an astronaut during extra-vehicular activity (EVA). Traditionally, this has been accomplished utilizing non-regenerative lithium hydroxide (LiOH) or regenerative metal oxide (MetOx) canisters which pose a significant weight burden. Although such technology enables air revitalization, the volume requirements to store the waste canisters as well as the mass to transport multiple units become prohibitive as mission durations increase. Consequently, motivation exists toward developing a fully regenerative technology for environmental control. The application of solid amine materials with vacuum swing adsorption technology has shown the capacity to control CO2 and concomitantly manage humidity levels through a fully regenerative cycle eliminating mission constraints imposed with non-regenerative technologies. Experimental results for full-size and sub-scale test articles have been collected and are described herein. In order to accelerate the developmental efforts, an axially-dispersed plug ow model with an accompanying energy balance has been established and correlated with the experimental data. The experimental and simulation results display good agreement for a variety of ow rates (110-170 SLM), replicated metabolic challenges (100-590 Watts), and atmosphere pressures under consideration for the spacesuit (248 and 760 mm Hg). The relationship between swing adsorption cycles for an outlet criterion of 6.0 mm Hg of CO2 partial pressure has been established for each metabolic challenge. In addition, variable metabolic profiles were imposed on the test articles in order to assess the ability of the technology to transition to new operational constraints. The advent of the model provides the capacity to apply computer-aided engineering practices to support the ongoing efforts to optimize and mature this technology for future application to space

  3. Coated particle fuel for radioisotope power systems and heater units: status and future research needs

    NASA Astrophysics Data System (ADS)

    El-Genk, Mohamed S.; Tournier, Jean-Michel; Sholtis, Joseph A.; Lipinski, Ronald J.

    2000-01-01

    Coated particle fuel has been proposed recently for use in Radioisotope Power Systems (RPSs) and Radioisotope Heater Units (RHUs) for a variety of space missions requiring power levels from mWs to 10's or even hundreds of Watts. It can be made into different shapes and sizes of solid compacts, heating tapes, or paints. Using a conservative design approach, this fuel form could increase by 2.3-2.4 times the thermal power output of a LWRHU, while offering promise of enhanced safety. These performance figures are based on using single-size (500 μm) compacts of ZrC coated 238PuO2 kernels and assuming 10% and 5% He release, respectively, at 1723 K, following 10 years of storage. Using binary-size (300 and 1200 μm) fuel kernels in the compact increases the thermal power output by an additional 15%. 238PuO2 fuel kernels are intentionally sized (>=300 μm in diameter) to prevent any adverse radiological effects. They are non-respirable and non-inhalable and, if ingested, would simply be excreted with no radiological effects. The 238PuO2 fuel kernels are contained within a strong ZrC coating, which is designed to fully retain the fuel and the helium gas. Helium retention in large grain (>=300 μm) granular and polycrystalline fuel kernels is possible even at high temperatures (>1700 K). The former could be fabricated using binderless agglomeration or similar processes, while the latter could be fabricated using Sol-Gel or thermal plasma processes, with potentially less radioactive waste and fabrication contamination. In addition to summarizing the results of a recent effort investigating the performance of coated fuel particle compact (CPFC) and helium gas release, this paper identifies and discusses future research and testing needs. .

  4. Environmental Control Unit Harness Project

    NASA Technical Reports Server (NTRS)

    Oliva-Buisson, Yvette J.

    2014-01-01

    Testing four new Environmental Control Unit Harnesses for improved user comfort during SCAPE operations. Phase I, testing in a lab environment, Phase II will continue testing the best candidates in a field environment.

  5. Weather--An Integrated Unit

    ERIC Educational Resources Information Center

    McConnell, Vivian

    1976-01-01

    Outlined is a two week unit on weather offered as independent study for sixth- and seventh-year students in Vancouver, Canada, schools. Included is a section on weather lore and a chart of weather symbols. (SL)

  6. Advanced extravehicular mobility unit study

    NASA Technical Reports Server (NTRS)

    Elkins, W.

    1982-01-01

    Components of the advanced extravehicular mobility unit (suit) are described. Design considerations for radiation protection, extravehicular operational pressure, mobility effects, tool/glove/effector, anthropometric definition, lighting, and equipment turnaround are addressed.

  7. United States laws under review.

    PubMed

    Leahey, M

    2007-01-01

    As well as reauthorisation of the Medical Device User Fee and Modernization Act, others isues are under consideration by the United States Congress. These include the introduction of incentives for the development of medical devices for paediatric care.

  8. Electronegativity Equalization with Pauling Units.

    ERIC Educational Resources Information Center

    Bratsch, Steven G.

    1984-01-01

    Discusses electronegativity equalization using Pauling units. Although Pauling has qualitatively defined electronegativity as the power of an atom in a molecule to attract electrons to itself, Pauling electronegativities are treated in this paper as prebonded, isolated-atom quantities. (JN)

  9. Accelerating the performance of a novel meshless method based on collocation with radial basis functions by employing a graphical processing unit as a parallel coprocessor

    NASA Astrophysics Data System (ADS)

    Owusu-Banson, Derek

    In recent times, a variety of industries, applications and numerical methods including the meshless method have enjoyed a great deal of success by utilizing the graphical processing unit (GPU) as a parallel coprocessor. These benefits often include performance improvement over the previous implementations. Furthermore, applications running on graphics processors enjoy superior performance per dollar and performance per watt than implementations built exclusively on traditional central processing technologies. The GPU was originally designed for graphics acceleration but the modern GPU, known as the General Purpose Graphical Processing Unit (GPGPU) can be used for scientific and engineering calculations. The GPGPU consists of massively parallel array of integer and floating point processors. There are typically hundreds of processors per graphics card with dedicated high-speed memory. This work describes an application written by the author, titled GaussianRBF to show the implementation and results of a novel meshless method that in-cooperates the collocation of the Gaussian radial basis function by utilizing the GPU as a parallel co-processor. Key phases of the proposed meshless method have been executed on the GPU using the NVIDIA CUDA software development kit. Especially, the matrix fill and solution phases have been carried out on the GPU, along with some post processing. This approach resulted in a decreased processing time compared to similar algorithm implemented on the CPU while maintaining the same accuracy.

  10. United Kingdom: Health System Review.

    PubMed

    Cylus, Jonathan; Richardson, Erica; Findley, Lisa; Longley, Marcus; O'Neill, Ciaran; Steel, David

    2015-01-01

    This analysis of the United Kingdom health system reviews recent developments in organization and governance, health financing, health care provision, health reforms and health system performance. It provides an overview of how the national health services operate in the four nations that make up the United Kingdom, as responsibility for organizing health financing and services was devolved from 1997. With devolution, the health systems in the United Kingdom have diverged in the details of how services are organized and paid for, but all have maintained national health services which provide universal access to a comprehensive package of services that are mostly free at the point of use. These health services are predominantly financed from general taxation and 83.5% of total health expenditure in the United Kingdom came from public sources in 2013. Life expectancy has increased steadily across the United Kingdom, but health inequalities have proved stubbornly resistant to improvement, and the gap between the most deprived and the most privileged continues to widen, rather than close. The United Kingdom faces challenges going forward, including how to cope with the needs of an ageing population, how to manage populations with poor health behaviours and associated chronic conditions, how to meet patient expectations of access to the latest available medicines and technologies, and how to adapt a system that has limited resources to expand its workforce and infrastructural capacity so it can rise to these challenges.

  11. Basic Facts about the United Nations.

    ERIC Educational Resources Information Center

    United Nations, New York, NY. Office of Public Information.

    The work of the United Nations is described in summary form. Material is divided into sections on the origin, programs, purpose, principles, and structure of the United Nations; the United Nations at work for International Peace; the United Nations at Work for Economic and Social Development; The United Nations at Work for Decolonization; the…

  12. A BASIC CAMERA UNIT FOR MEDICAL PHOTOGRAPHY.

    PubMed

    SMIALOWSKI, A; CURRIE, D J

    1964-08-22

    A camera unit suitable for most medical photographic purposes is described. The unit comprises a single-lens reflex camera, an electronic flash unit and supplementary lenses. Simple instructions for use of th's basic unit are presented. The unit is entirely suitable for taking fine-quality photographs of most medical subjects by persons who have had little photographic training.

  13. 7 CFR 60.127 - United States.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false United States. 60.127 Section 60.127 Agriculture... FOR FISH AND SHELLFISH General Provisions Definitions § 60.127 United States. United States means the... the United States, and the waters of the United States as defined in § 60.132....

  14. 7 CFR 60.127 - United States.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false United States. 60.127 Section 60.127 Agriculture... FOR FISH AND SHELLFISH General Provisions Definitions § 60.127 United States. United States means the... the United States, and the waters of the United States as defined in § 60.132....

  15. 31 CFR 800.225 - United States.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false United States. 800.225 Section 800.225... FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any...

  16. 31 CFR 800.225 - United States.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false United States. 800.225 Section 800.225... FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any...

  17. 7 CFR 1160.104 - United States.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 9 2011-01-01 2011-01-01 false United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the......

  18. 7 CFR 60.127 - United States.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false United States. 60.127 Section 60.127 Agriculture... FOR FISH AND SHELLFISH General Provisions Definitions § 60.127 United States. United States means the... the United States, and the waters of the United States as defined in § 60.132....

  19. 31 CFR 800.225 - United States.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false United States. 800.225 Section 800.225... FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any...

  20. 7 CFR 1160.104 - United States.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 9 2012-01-01 2012-01-01 false United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the......

  1. 31 CFR 800.225 - United States.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false United States. 800.225 Section 800.225... FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any...

  2. 7 CFR 60.127 - United States.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false United States. 60.127 Section 60.127 Agriculture... FOR FISH AND SHELLFISH General Provisions Definitions § 60.127 United States. United States means the... the United States, and the waters of the United States as defined in § 60.132....

  3. 7 CFR 1160.104 - United States.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 9 2013-01-01 2013-01-01 false United States. 1160.104 Section 1160.104 Agriculture... Definitions § 1160.104 United States. United States means the 48 contiguous states in the continental United States and the District of Columbia, except that United States means the 50 states of the......

  4. Nations United: The United Nations, the United States, and the Global Campaign Against Terrorism. A Curriculum Unit & Video for Secondary Schools.

    ERIC Educational Resources Information Center

    Houlihan, Christina; McLeod, Shannon

    This curriculum unit and 1-hour videotape are designed to help students understand the purpose and functions of the United Nations (UN) and explore the relationship between the United Nations and the United States. The UN's role in the global counterterrorism campaign serves as a case study for the unit. The students are asked to develop a basic…

  5. 31 CFR 800.225 - United States.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 800.225 Section 800... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.225 United States. The term United States or U.S. means the United States of America, the States of the United States, the District of Columbia, and any...

  6. 75 FR 5373 - United States Mint

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-02

    ... United States Mint ACTION: Notification of Pricing for 2010 United States Mint Presidential $1 Coin Proof Set. \\TM\\ SUMMARY: The United States Mint is announcing the price of the 2010 United States Mint Presidential $1 Coin Proof Set. The 2010 United States Mint Presidential $1 Coin Proof Set, featuring $1...

  7. Follicular Unit Extraction Hair Transplant

    PubMed Central

    Dua, Aman; Dua, Kapil

    2010-01-01

    Hair transplantation has come a long way from the days of Punch Hair Transplant by Dr. Orentreich in 1950s to Follicular Unit Hair Transplant (FUT) of 1990s and the very recent Follicular Unit Extraction (FUE) technique. With the advent of FUE, the dream of ‘no visible scarring’ in the donor area is now looking like a possibility. In FUE, the grafts are extracted as individual follicular units in a two-step or three-step technique whereas the method of implantation remains the same as in the traditional FUT. The addition of latest automated FUE technique seeks to overcome some of the limitations in this relatively new technique and it is now possible to achieve more than a thousand grafts in one day in trained hands. This article reviews the methodology, limitations and advantages of FUE hair transplant. PMID:21031064

  8. THOR Particle Processing Unit PPU

    NASA Astrophysics Data System (ADS)

    Federica Marcucci, Maria; Bruno, Roberto; Consolini, Giuseppe; D'Amicis, Raffaella; De Lauretis, Marcello; De Marco, Rossana; De Michelis, Paola; Francia, Patrizia; Laurenza, Monica; Materassi, Massimo; Vellante, Massimo; Valentini, Francesco

    2016-04-01

    Turbulence Heating ObserveR (THOR) is the first mission ever flown in space dedicated to plasma turbulence. On board THOR, data collected by the Turbulent Electron Analyser, the Ion Mass Spectrum analyser and the Cold Solar Wind ion analyser instruments will be processed by a common digital processor unit, the Particle Processing Unit (PPU). PPU architecture will be based on the state of the art space flight processors and will be fully redundant, in order to efficiently and safely handle the data from the numerous sensors of the instruments suite. The approach of a common processing unit for particle instruments is very important for the enabling of an efficient management for correlative plasma measurements, also facilitating interoperation with other instruments on the spacecraft. Moreover, it permits technical and programmatic synergies giving the possibility to optimize and save spacecraft resources.

  9. United airway disease: current perspectives

    PubMed Central

    Giavina-Bianchi, Pedro; Aun, Marcelo Vivolo; Takejima, Priscila; Kalil, Jorge; Agondi, Rosana Câmara

    2016-01-01

    Upper and lower airways are considered a unified morphological and functional unit, and the connection existing between them has been observed for many years, both in health and in disease. There is strong epidemiologic, pathophysiologic, and clinical evidence supporting an integrated view of rhinitis and asthma: united airway disease in the present review. The term “united airway disease” is opportune, because rhinitis and asthma are chronic inflammatory diseases of the upper and lower airways, which can be induced by allergic or nonallergic reproducible mechanisms, and present several phenotypes. Management of rhinitis and asthma must be jointly carried out, leading to better control of both diseases, and the lessons of the Allergic Rhinitis and Its Impact on Asthma initiative cannot be forgotten. PMID:27257389

  10. Assessment unit meets Trust ambitions.

    PubMed

    Baillie, Jonathan

    2016-03-01

    The quality of the care environment within a new 16-bedded modular-built ward, the Gilwern Assessment Unit, at Hereford County Hopsital, has won widespread praise from the clinicians and nurses staffing it--many of whom were recruited specially to work in it. The impressive new single-storey assessment unit for frail, older patients--which admitted its first patients just before Christmas--is formed from 14 separate modules erected offsite, delivered individually on low-loaders, craned into position, and then finished and fitted out to an extremely high standard, by off-site building specialist, MTX. The new ward was completed on budget to an extremely tight schedule, met--thanks to excellent teamwork--despite the added complication of the unit being built over a former burial ground. PMID:27132303

  11. Assessment unit meets Trust ambitions.

    PubMed

    Baillie, Jonathan

    2016-03-01

    The quality of the care environment within a new 16-bedded modular-built ward, the Gilwern Assessment Unit, at Hereford County Hopsital, has won widespread praise from the clinicians and nurses staffing it--many of whom were recruited specially to work in it. The impressive new single-storey assessment unit for frail, older patients--which admitted its first patients just before Christmas--is formed from 14 separate modules erected offsite, delivered individually on low-loaders, craned into position, and then finished and fitted out to an extremely high standard, by off-site building specialist, MTX. The new ward was completed on budget to an extremely tight schedule, met--thanks to excellent teamwork--despite the added complication of the unit being built over a former burial ground.

  12. Adventures in United States History. Unit 2: A New Nation.

    ERIC Educational Resources Information Center

    Greenberg, Morris S.; And Others

    The second in a series of units on American history prepared for Los Angeles high school students discusses the founding of the nation, the constitution, and the growth and development up to 1828. Included are information on selected national leaders and the expanding frontiers. Each chapter contains a summary reading, several activities, some…

  13. Adventures in United States History. Unit 3: Americans Move West.

    ERIC Educational Resources Information Center

    Greenberg, Morris S.; And Others

    Unit Three in an American history curriculum prepared for the Los Angeles high schools is concerned with the westward movement. Discussed are the early explorers and trappers, the acquisition of new lands, California's early history, and the settlement of the Great Plains. The chapters include a summary reading, several activities, some enrichment…

  14. Auto Body Repair. Supplementary Units. Instructor Key and Student Units.

    ERIC Educational Resources Information Center

    Daniel, Linda; Muench, James F., Ed.

    These supplementary units are designed to help students with special needs learn and apply auto body repair skills. The material specifically supplements the Auto Body Repair Curriculum Guide (University of Missouri-Columbia 1988), and is intended for instructors serving the occupational needs of various categories of disadvantaged and handicapped…

  15. Organization of the POCT Unit

    PubMed Central

    2015-01-01

    Point-of-care testing (POCT) has evolved as an important part of laboratory medicine by virtue of its compactness, portability, and the feasibility of operation by nonlaboratory personnel, where fast and accurate testing methods are a primary concern and, as a result, improving the patient care. To successfully achieve POCT quality in networks, a multidisciplinary organizational approach is required. A clearly defined organizational structure should be put in place for proper functioning and optimum utilization of each POCT unit. The POCT unit must include designated authority, responsibility, and accountability.

  16. Prolift pumping unit makes debut

    SciTech Connect

    Rintoul, B.

    1983-03-01

    The ProLift is a long stroke unit designed to pump wells more efficiently and at less cost than existing walking beam type pumps. The price is competitive with other pumps on the market. The basic component of the pump unit is the yo-yo, a 30-in. diam steel drum slotted for a special belt that connects via an idler drum and a crown shiv with the rod string. The yo-yo rotates in both directions, playing out the belt on the down cycle, winding it in on the upward cycle. On the down stroke, the yo-yo generates electricity. A counterweight box travels inside the mast.

  17. Update: Influenza Activity - United States.

    PubMed

    Smith, Sophie; Blanton, Lenee; Kniss, Krista; Mustaquim, Desiree; Steffens, Craig; Reed, Carrie; Bramley, Anna; Flannery, Brendan; Fry, Alicia M; Grohskopf, Lisa A; Bresee, Joseph; Wallis, Teresa; Garten, Rebecca; Xu, Xiyan; Elal, Anwar Isa Abd; Gubareva, Larisa; Barnes, John; Wentworth, David E; Burns, Erin; Katz, Jacqueline; Jernigan, Daniel; Brammer, Lynnette

    2015-12-11

    CDC collects, compiles, and analyzes data on influenza activity year-round in the United States. The influenza season generally begins in the fall and continues through the winter and spring months; however, the timing and severity of circulating influenza viruses can vary by geographic location and season. Influenza activity in the United States remained low through October and November in 2015. Influenza A viruses have been most frequently identified, with influenza A (H3) viruses predominating. This report summarizes U.S. influenza activity for the period October 4-November 28, 2015. PMID:26656182

  18. Characterization of major lithologic units underlying the lower American River using water-borne continuous resistivity profiling, Sacramento, California, June 2008

    USGS Publications Warehouse

    Ball, Lyndsay B.; Teeple, Andrew P.

    2013-01-01

    The levee system of the lower American River in Sacramento, California, is situated above a mixed lithology of alluvial deposits that range from clay to gravel. In addition, sand deposits related to hydraulic mining activities underlie the floodplain and are preferentially prone to scour during high-flow events. In contrast, sections of the American River channel have been observed to be scour resistant. In this study, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, explores the resistivity structure of the American River channel to characterize the extent and thickness of lithologic units that may impact the scour potential of the area. Likely lithologic structures are interpreted, but these interpretations are non-unique and cannot be directly related to scour potential. Additional geotechnical data would provide insightful data on the scour potential of certain lithologic units. Additional interpretation of the resistivity data with respect to these results may improve interpretations of lithology and scour potential throughout the American River channel and floodplain. Resistivity data were collected in three profiles along the American River using a water-borne continuous resistivity profiling technique. After processing and modeling these data, inverted resistivity profiles were used to make interpretations about the extent and thickness of possible lithologic units. In general, an intermittent high-resistivity layer likely indicative of sand or gravel deposits extends to a depth of around 30 feet (9 meters) and is underlain by a consistent low-resistivity layer that likely indicates a high-clay content unit that extends below the depth of investigation (60 feet or 18 meters). Immediately upstream of the Watt Avenue Bridge, the high-resistivity layer is absent, and the low-resistivity layer extends to the surface where a scour-resistant layer has been previously observed in the river bed.

  19. Maps of the United States

    USGS Publications Warehouse

    ,

    1998-01-01

    The U.S. Geological Survey (USGS) sells a variety of maps of the United States.  Who needs these maps?  Students, land planners, politicians, teachers, marketing specialists, delivery companies, authors and illustrators, attorneys, railroad enthusiasts, travelers, Government agencies, military recruiters, newspapers, map collectors, truckers, boaters, hikers, sales representatives, communication specialists.  Everybody.

  20. An Inpatient Vocational Rehabilitation Unit.

    ERIC Educational Resources Information Center

    Bielefeld, Martin

    This paper describes the Cleveland Veterans Administration inpatient Vocational Rehabilitation Unit (VRU), an intensive vocational assessment and counseling program designed to maximize the self-reliance and productivity of patients. The VRU is presented as a minimal care, 3-month maximum treatment program in which patients work on incentive pay…