Science.gov

Sample records for 10-fold serial dilutions

  1. Serial Dilution Simulation Lab

    ERIC Educational Resources Information Center

    Keler, Cynthia; Balutis, Tabitha; Bergen, Kim; Laudenslager, Bryanna; Rubino, Deanna

    2010-01-01

    Serial dilution is often a difficult concept for students to understand. In this short dry lab exercise, students perform serial dilutions using seed beads. This exercise helps students gain skill at performing dilutions without using reagents, bacterial cultures, or viral cultures, while being able to visualize the process.

  2. Microfluidic serial dilution ladder.

    PubMed

    Ahrar, Siavash; Hwang, Michelle; Duncan, Philip N; Hui, Elliot E

    2014-01-01

    Serial dilution is a fundamental procedure that is common to a large number of laboratory protocols. Automation of serial dilution is thus a valuable component for lab-on-a-chip systems. While a handful of different microfluidic strategies for serial dilution have been reported, approaches based on continuous flow mixing inherently consume larger amounts of sample volume and chip real estate. We employ valve-driven circulatory mixing to address these issues and also introduce a novel device structure to store each stage of the dilution process. The dilution strategy is based on sequentially mixing the rungs of a ladder structure. We demonstrate a 7-stage series of 1 : 1 dilutions with R(2) equal to 0.995 in an active device area of 1 cm(2).

  3. Dispersion serial dilution methods using the gradient diluter device.

    PubMed

    Walling, Leslie; Schulz, Craig; Johnson, Michael

    2012-12-01

    A solute aspirated into a prefilled tube of diluent undergoes a dilution effect known as dispersion. Traditionally the effects of dispersion have been considered a negative consequence of using liquid-filled fixed-tip liquid handlers. We present a novel device and technique that utilizes the effects of dispersion to the benefit of making dilutions. The device known as the Gradient Diluter extends the dilution range of practical serial dilutions to six orders of magnitude in final volumes as low as 10 μL. Presented are the device, dispersion methods, and validation tests using fluorescence detection of sulforhodamine and the high-performance liquid chromatography/ultraviolet detection of furosemide. In addition, a T-cell inhibition assay of a relevant downstream protein is used to demonstrate IC(50) curves made with the Gradient Diluter compare favorably with those generated by hand.

  4. Statistical inference for serial dilution assay data.

    PubMed

    Lee, M L; Whitmore, G A

    1999-12-01

    Serial dilution assays are widely employed for estimating substance concentrations and minimum inhibitory concentrations. The Poisson-Bernoulli model for such assays is appropriate for count data but not for continuous measurements that are encountered in applications involving substance concentrations. This paper presents practical inference methods based on a log-normal model and illustrates these methods using a case application involving bacterial toxins.

  5. Estimation method for serial dilution experiments.

    PubMed

    Ben-David, Avishai; Davidson, Charles E

    2014-12-01

    Titration of microorganisms in infectious or environmental samples is a corner stone of quantitative microbiology. A simple method is presented to estimate the microbial counts obtained with the serial dilution technique for microorganisms that can grow on bacteriological media and develop into a colony. The number (concentration) of viable microbial organisms is estimated from a single dilution plate (assay) without a need for replicate plates. Our method selects the best agar plate with which to estimate the microbial counts, and takes into account the colony size and plate area that both contribute to the likelihood of miscounting the number of colonies on a plate. The estimate of the optimal count given by our method can be used to narrow the search for the best (optimal) dilution plate and saves time. The required inputs are the plate size, the microbial colony size, and the serial dilution factors. The proposed approach shows relative accuracy well within ±0.1log10 from data produced by computer simulations. The method maintains this accuracy even in the presence of dilution errors of up to 10% (for both the aliquot and diluent volumes), microbial counts between 10(4) and 10(12) colony-forming units, dilution ratios from 2 to 100, and plate size to colony size ratios between 6.25 to 200.

  6. Electrocoalescence based serial dilution of microfluidic droplets.

    PubMed

    Bhattacharjee, Biddut; Vanapalli, Siva A

    2014-07-01

    Dilution of microfluidic droplets where the concentration of a reagent is incrementally varied is a key operation in drop-based biological analysis. Here, we present an electrocoalescence based dilution scheme for droplets based on merging between moving and parked drops. We study the effects of fluidic and electrical parameters on the dilution process. Highly consistent coalescence and fine resolution in dilution factor are achieved with an AC signal as low as 10 V even though the electrodes are separated from the fluidic channel by insulator. We find that the amount of material exchange between the droplets per coalescence event is high for low capillary number. We also observe different types of coalescence depending on the flow and electrical parameters and discuss their influence on the rate of dilution. Overall, we find the key parameter governing the rate of dilution is the duration of coalescence between the moving and parked drop. The proposed design is simple incorporating the channel electrodes in the same layer as that of the fluidic channels. Our approach allows on-demand and controlled dilution of droplets and is simple enough to be useful for assays that require serial dilutions. The approach can also be useful for applications where there is a need to replace or wash fluid from stored drops.

  7. Electrocoalescence based serial dilution of microfluidic droplets

    PubMed Central

    Bhattacharjee, Biddut; Vanapalli, Siva A.

    2014-01-01

    Dilution of microfluidic droplets where the concentration of a reagent is incrementally varied is a key operation in drop-based biological analysis. Here, we present an electrocoalescence based dilution scheme for droplets based on merging between moving and parked drops. We study the effects of fluidic and electrical parameters on the dilution process. Highly consistent coalescence and fine resolution in dilution factor are achieved with an AC signal as low as 10 V even though the electrodes are separated from the fluidic channel by insulator. We find that the amount of material exchange between the droplets per coalescence event is high for low capillary number. We also observe different types of coalescence depending on the flow and electrical parameters and discuss their influence on the rate of dilution. Overall, we find the key parameter governing the rate of dilution is the duration of coalescence between the moving and parked drop. The proposed design is simple incorporating the channel electrodes in the same layer as that of the fluidic channels. Our approach allows on-demand and controlled dilution of droplets and is simple enough to be useful for assays that require serial dilutions. The approach can also be useful for applications where there is a need to replace or wash fluid from stored drops. PMID:25379096

  8. Serial dilution microchip for cytotoxicity test

    NASA Astrophysics Data System (ADS)

    Bang, Hyunwoo; Lim, Sun Hee; Lee, Young Kyung; Chung, Seok; Chung, Chanil; Han, Dong-Chul; Chang, Jun Keun

    2004-08-01

    Today's pharmaceutical industry is facing challenges resulting from the vast increases in sample numbers produced by high-throughput screening (HTS). In addition, the bottlenecks created by increased demand for cytotoxicity testing (required to assess compound safety) are becoming a serious problem. We have developed a polymer PDMS (polydimethylsiloxane) based microfluidic device that can perform a cytotoxicity test in a rapid and reproducible manner. The concept that the device includes is well adjustable to automated robots in huge HTS systems, so we can think of it as a potential dilution and delivery module. Cytotoxicity testing is all about the dilution and dispensing of a drug sample. Previously, we made a PDMS based microfluidic device which automatically and precisely diluted drugs with a buffer solution with serially increasing concentrations. This time, the serially diluted drug solution was directly delivered to 96 well plates for cytotoxicity testing. Cytotoxic paclitaxel solution with 2% RPMI 1640 has been used while carrying out cancerous cell based cytotoxicity tests. We believe that this rapid and robust use of the PDMS microchip will overcome the growing problem in cytotoxicity testing for HTS.

  9. A nanoliter microfluidic serial dilution bioreactor.

    PubMed

    Gu, Guo-Yue; Lee, Yi-Wei; Chiang, Chih-Chung; Yang, Ya-Tang

    2015-07-01

    Bacterial culture is a basic technique in both fundamental and applied microbiology. The excessive reagent consumption and laborious maintenance of bulk bioreactors for microbial culture have prompted the development of miniaturized on-chip bioreactors. With the minimal choice of two compartments (N = 2) and discrete time, periodic dilution steps, we realize a microfluidic bioreactor that mimics macroscopic serial dilution transfer culture. This device supports automated, long-term microbial cultures with a nanoliter-scale working volume and real-time monitoring of microbial populations at single-cell resolution. Because of the high surface-to-volume ratio, the device also operates as an effective biofilm-flow reactor to support cogrowth of planktonic and biofilm populations. We expect that such devices will open opportunities in many fields of microbiology.

  10. Upper and lower bounds for a serial dilution test.

    PubMed

    Blodgett, Robert J

    2005-01-01

    A Poisson-binomial model estimates the concentration of a target microbe from a serial dilution test. The maximum likelihood procedure gives an equation whose solution equals the estimate of the concentration. This paper gives bounds for the solution to this equation that require only minimal calculations.

  11. Implementing Inquiry-Based Learning in Teaching Serial Dilutions

    ERIC Educational Resources Information Center

    Walker, Candace L.; McGill, Michael T.; Buikema, Arthur L., Jr.; Stevens, Ann M.

    2008-01-01

    The 5E model of inquiry-based learning was incorporated into a sophomore-level microbiology laboratory to increase student understanding of serial dilutions, a concept that is often difficult for most students to comprehend. Quantitative and qualitative assessments were conducted during the semester to determine the value of this approach for…

  12. Statistical design for a small serial dilution series.

    PubMed

    Zelterman, Daniel; Tulupyev, Alexander; Heimer, Robert; Abdala, Nadia

    2010-02-10

    We describe statistical plans for a serial dilution series designed to detect and estimate the number of viral particles in a solution. The design addresses a problem when a very limited number of aliquots are available for proliferation. A gamma prior distribution on the number of viral particles allows us to describe the marginal probability distribution of all experimental outcomes. We examine a design that minimizes the expected reciprocal information and compare this with the maximum entropy design. We argue that the maximum entropy design is more useful from the point of view of the laboratory technician. The problem and design are motivated by our study of the viability of human immunodeficiency virus in syringes and other equipment that might mediate blood-borne viral transmission.

  13. Split-plot designs for robotic serial dilution assays.

    PubMed

    Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

    2011-12-01

    This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. PMID:21627628

  14. Split-plot designs for robotic serial dilution assays.

    PubMed

    Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

    2011-12-01

    This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs.

  15. ON-DEMAND SERIAL DILUTION USING QUANTIZED NANO/PICOLITER-SCALE DROPLETS

    SciTech Connect

    Jambovane, Sachin R.; Prost, Spencer A.; Sheen, Allison M.; Magnuson, Jon K.; Kelly, Ryan T.

    2014-10-29

    This paper describes a fully automated droplet-based microfluidic device for on-demand serial dilution that is capable of achieving a dilution ratio of >6000 (concentration ranges from 1 mM to 160nM) over 35 nanoliter-scale droplets. This serial diluter can be applied to high throughput and label-free kinetic assays by integrating with our previously developed on-demand droplet-based microfluidic with mass spectrometry detection.

  16. Serial dilution via surface energy trap-assisted magnetic droplet manipulation.

    PubMed

    Zhang, Yi; Shin, Dong Jin; Wang, Tza-Huei

    2013-12-21

    This paper demonstrates a facile method of generating precise serial dilutions in the form of droplets on an open surface platform. The method relies on the use of surface energy traps (SETs), etched areas of high surface energy on a Teflon coated glass substrate, to assist in the magnetic manipulation of droplets to meter and dispense liquid of defined volumes for the preparation of serial dilutions. The volume of the dispensed liquid can be precisely controlled by the size of the SETs, facilitating generation of concentration profiles of high linearity. We have applied this approach to the generation of serial dilutions of antibiotics for anti-microbial susceptibility testing (AST).

  17. Optimizing production of serially diluted compounds and distribution to multiple targets

    PubMed Central

    Harris, Cole O.; Schweiker, Stephanie L.

    2001-01-01

    The need for a multiple-target compound selectivity programme led to the establishment of a single robotic system that produces a compound's serial dilution and its distribution to multiple replicate assay plates. A Genesis RSP 150 integrated into a Zymate Laboratory Automation System XP produced the serial dilutions, and the subsequent replicate assay plates were produced quickly and accurately by an efficient use of the carousels and rapid plate. Currently, this process allows for the production of over 200 serial dilution assay plates in a workday. PMID:18924709

  18. An inline QC method for determining serial dilution performance of DMSO-based systems.

    PubMed

    Walling, Leslie A

    2011-06-01

    Serial dilution of compounds solubilized in dimethylsulfoxide (DMSO) for dose-response curves is a common method for efficacy analysis of potential drug candidates. In general, serial dilution methods are particularly prone to error propagation because each dilution is dependent on the previous concentration. Moreover, assumptions about quality control parameters (i.e., dye linearity) can lead to an erroneous process. Here, an inline performance measurement is sought to improve the precision and accuracy of dilution plates. Sulforhodamine 101 (S101) dye is introduced as the quantitative fluorometric method of choice for DMSO-based systems. Although S101 in DMSO behaves in a nonlinear fashion over its detectable range, we account for this with a direct calibration method that includes every point of the dilution template. This report contains dye selection rationale for the S101 dye and its use in quantifying the performance of 96- and 384-well dilution protocols as tested on five identical instruments.

  19. A serial dilution microfluidic device using a ladder network generating logarithmic or linear concentrations.

    PubMed

    Kim, Choong; Lee, Kangsun; Kim, Jong Hyun; Shin, Kyeong Sik; Lee, Kyu-Jung; Kim, Tae Song; Kang, Ji Yoon

    2008-03-01

    In this paper, we propose a serial dilution microfluidic chip which is able to generate logarithmic or linear step-wise concentrations. These concentrations were generated via adjustments in the flow rate of two converging fluids at the channel junctions of the ladder network. The desired dilution ratios are almost independent of the flow rate or diffusion length of molecules, as the dilution device is influenced only by the ratio of volumetric flow rates. Given a set of necessary dilution ratios, whether linear or logarithmic, a serial dilution chip can be constructed via the modification of a microfluidic resistance network. The design principle was suggested and both the logarithmic and linear dilution chips were fabricated in order to verify their performance in accordance with the fluorescence intensity. The diluted concentrations of a fluorescein solution in the microfluidic device evidenced relatively high linearity, and the cytotoxicity test of MCF-7 breast cancer cells via the logarithmic dilution chip was generally consistent with the results generated with manual dilution.

  20. Multicenter comparison of the ISO standard 20776-1 and the serial 2-fold dilution procedures to dilute hydrophilic and hydrophobic antifungal agents for susceptibility testing.

    PubMed

    Gomez-Lopez, Alicia; Arendrup, Maiken Cavling; Lass-Floerl, Cornelia; Rodriguez-Tudela, Juan-Luis; Cuenca-Estrella, Manuel

    2010-05-01

    A multicenter study was conducted to assess the accuracy of the ISO standard 20776-1 and the serial 2-fold dilution procedures for antifungal susceptibility testing. Fluconazole trays can be accurately prepared by following ISO and serial dilution schemes. However, itraconazole trays showed a significant lack of reproducibility that was independent of which method was followed.

  1. Theory of a microfluidic serial dilution bioreactor for growth of planktonic and biofilm populations.

    PubMed

    Hsu, Sze-Bi; Yang, Ya-Tang

    2016-04-01

    We present the theory of a microfluidic bioreactor with a two-compartment growth chamber and periodic serial dilution. In the model, coexisting planktonic and biofilm populations exchange by adsorption and detachment. The criteria for coexistence and global extinction are determined by stability analysis of the global extinction state. Stability analysis yields the operating diagram in terms of the dilution and removal ratios, constrained by the plumbing action of the bioreactor. The special case of equal uptake function and logistic growth is analytically solved and explicit growth curves are plotted. The presented theory is applicable to generic microfluidic bioreactors with discrete growth chambers and periodic dilution at discrete time points. Therefore, the theory is expected to assist the design of microfluidic devices for investigating microbial competition and microbial biofilm growth under serial dilution conditions.

  2. Design and analysis of serial limiting dilution assays with small sample sizes.

    PubMed

    Macken, C

    1999-01-01

    We study the design of serial limiting dilution assays (SLDAs) for estimation of effector cell frequency in settings that restrict severely the amount of material available for assay, and for which the assumption of a single-hit Poisson model is reasonable. For different designs (that is, dilution factor, number of dilution levels, and number of replicates at each level), we evaluate maximum likelihood and minimum chi-square estimators, using four quantitative criteria: probability of a non-informative assay (PNI), bias, coefficient of variation (CV), and mean squared error (MSE). Our results are exact, not simulation-based, nor approximations. We found that differences between these two estimators were insubstantial by comparison with the effect on the estimators of the experimental design. Bias was severe in small assays, and could lead, in extremely small designs, to overestimation of effector frequency by as much as 100%. These four criteria provide a rigorous basis for determining the most effective apportionment of total effort among replicates and dilution levels. By increasing the dilution factor and favoring the number of replicates over the number of dilution levels, the PNI is reduced while bias, CV and MSE are increased; and vice versa. Our study is easily extended to estimation of the density of biologically active particles per volume. It can also be extended to alternatives to the single-hit Poisson model for a serial limiting dilution assay.

  3. 2-layer based microfluidic concentration generator by hybrid serial and volumetric dilutions.

    PubMed

    Lee, Kangsun; Kim, Choong; Kim, Youngeun; Jung, Keunhui; Ahn, Byungwook; Kang, Ji Yoon; Oh, Kwang W

    2010-04-01

    We present a 2-layer based microfluidic concentration generator by a hybrid of a serial and a volumetric dilution for dose-response experiments in drug screening. The hybrid dilution method using 2-layer based microfluidic network significantly reduces the total number of cascaded serial dilution stages. The proposed strategy is capable of generating a large number of universal stepwise monotonic concentrations with a wide range of logarithmic and linear scales. We have studied an equivalent electrical circuit to that of the 2-layer based microfluidic network, where the only variable parameter is channel length. We have designed a microfluidic dilution generator simultaneously covering 14 doses with a combination of 4-order logarithmic and 4-point linear concentrations. The design has been verified by a commercial circuit analysis software (e.g., P-Spice) for the electrical circuit analysis and a computational fluid dynamics software (e.g., CFD-ACE+) for the microfluidic circuit analysis. As a real-life application of the proposed dilution generator, we have successfully performed a dose-response experiment using MCF-7 human breast cancer cells. We expect that the proposed dilution method will be useful to study not only high throughput drug screening but also optimization in biology, chemistry, medicine, and material sciences.

  4. Establishing quality assurance criteria for serial dilution operations on liquid-handling equipment.

    PubMed

    Popa-Burke, Ioana; Lupotsky, Brian; Boyer, Joseph; Gannon, William; Hughes, Rob; Kadwill, Paul; Lyerly, Donald; Nichols, Jason; Nixon, Elizabeth; Rimmer, Darren; Saiz-Nicolas, Isabel; Sanfiz-Pinto, Beatriz; Holland, Sue

    2009-09-01

    Since the advent of high-throughput screening (HTS) in the early 1990s, parallel multichannel liquid handlers have become a mainstay in every drug discovery setting. Although several peer-reviewed publications have discussed methods and criteria for stamping multiwell copies, there is very little information about establishing a standard operating procedure (SOP) for standard (microliter-level) serial dilutions of compounds used in dose-response experiments. The authors discuss the 4 main criteria any serial dilution process must pass (accuracy, precision, fold dilution, and outliers) and the process for establishing thresholds for all of these values in a compound management or biological screening laboratory. The thresholds need to be both low enough to be acceptable from a biological potency variability perspective and high enough to allow the instruments to pass the quality assurance (QA) analysis on a regular basis. In this article, the authors suggest suitable thresholds arrived at by a variety of methods, including trend analysis of QA data, survey questionnaire from the main stakeholders (screening scientists, chemists), and published criteria for single-shot stamping. A mathematical analysis of the effect of threshold values on estimated XC(50)s was performed to ensure that the variability introduced by the serial dilution step is within acceptable overall variability limits.

  5. Use of sediment serial dilution series to establish biological effect levels and clean-up goals

    SciTech Connect

    Timmer, E.; DeLong, T.; Millard, J.; Dobroski, C.

    1995-12-31

    A sediment serial dilution study was used to determine biological effect levels for two freshwater invertebrates, Chironomus tentans and Hyalella azteca. The sediments for the test were collected from a New England brook which contained elevated levels of lead and polychlorinated aromatic hydrocarbons. The objective of the sediment dilution study was two-fold: (1 ) to provide a site-specific estimation of biological effect levels, thus reducing uncertainties associated with using literature-based values, and (2) to establish clean-up goals specific to this freshwater system.

  6. Generalized serial dilution module for monotonic and arbitrary microfluidic gradient generators.

    PubMed

    Lee, Kangsun; Kim, Choong; Ahn, Byungwook; Panchapakesan, Rajagopal; Full, Anthony R; Nordee, Ledum; Kang, Ji Yoon; Oh, Kwang W

    2009-03-01

    In this paper, we propose a generalized serial dilution module for universal microfluidic concentration gradient generators including N cascaded-mixing stages in a stepwise manner. Desired concentrations were generated by means of controlled volumetric mixing ratios of two merging solutions in each stage. The flow rates were adjusted by controlling channel length, which is proportional to fluidic resistance in each channel. A generalized mathematical model for generating any complex concentration and output flow rate gradients is presented based on the fact that there is an analogy between microfluidic circuits and electrical circuits. The pressure drop corresponds to a voltage drop, the flow rate to an electrical current, and the flow resistance to an electrical resistance. A simple equivalent electrical circuit model was generalized, and in the model each channel segment was represented by an electrical resistance. As a result of the mathematical modelling, the only variable parameter in the generalized serial dilution module was the channel length. By the use of the generalized serial dilution module with N = 4, three types of microfluidic gradient generators for linear, logarithmic and Gaussian gradients were successfully designed and tested. The proposed strategy is capable of generating universal monotonic gradients with a single module or arbitrary gradients with multiple modules ranging from linear to complex non-linear shapes of concentration gradients as well as arbitrary output flow rate gradients in a stepwise manner. The simple universal gradient generation technology using the generalized serial dilution module will find widespread use in the greater chemical and biological community, and address many challenges of gradient-dependent phenomena.

  7. Standardisation and comparison of serial dilution and single dilution enzyme linked immunosorbent assay (ELISA) using different antigenic preparations of the Babesia (Theileria) equi parasite.

    PubMed

    Kumar, Sanjay; Kumar, Yogesh; Malhotra, Dharam V; Dhar, Shruti; Nichani, Anil K

    2003-01-01

    Serial dilution and single dilution enzyme linked immunosorbent assays (ELISA) were standardised and their sensitivity and specificity were compared for serodiagnosis of Babesia equi infection. The antibody titres of 24 donkey sera of known identity were determined separately by serial dilution ELISA using three different B. equi antigens namely whole merozoite (WM), cell membrane (CM) and high speed supernatant (HSS). The ratios of the optical density (OD) of known positive and known negative sera at different serum dilutions were calculated and termed as the positive/negative (P/N) ratio. The coefficients of correlation (r) were calculated between the P/N ratios at different dilutions of sera and the log10 antibody titres of the same sera were ascertained by serial dilution ELISA. The highest value of 'r' was obtained at a serum dilution of 1:200. From log10 antibody titre of sera (y) and their P/N ratio at a dilution of 1:200 (x), regression equations (y = a + bx) were calculated separately for the three antigens. Test sera were diluted to 1:200, their OD were read in duplicate wells and were converted to the P/N ratio. Antibody titres were predicted from the P/N ratio using a regression equation separately for the three antigens. Titres obtained by both ELISAs were not significantly different from each other, thus confirming that single dilution ELISA could be successfully used to replace conventional serial dilution ELISA. The sensitivity, specificity and predictive value of single dilution ELISA was validated statistically using 42 B. equi disease-positive sera and 106 B. equi disease-negative sera. The WM antigen was found to be the most sensitive with a higher predictive value for negative test sera as compared to the CM or HSS antigens. Sera positive for other equine infections including Babesia caballi showed no cross-reaction with the three B. equi antigens in ELISA, thus the test was immunologically specific. Antibody titres of 109 unknown field donkey

  8. Authentic active learning activities demonstrating the use of serial dilutions and plate counts.

    PubMed

    March, Jordon K; Jensen, Kyle C; Porter, Nathan T; Breakwell, Donald P

    2011-01-01

    Serial dilution and plate counting is often taught in courses for both microbiology and allied health students. Lecture examples and examination questions addressing how the method is used can sometimes be contrived: artificial data sets may have little or no meaning other than to have students perform a calculation. Here we provide a set of activities employing data sets acquired from the primary literature. Our objective was to have the students think critically about a real scenario in which serial dilution and plate count was used. Each activity requires students to read a paragraph describing the study, predict the results, perform the appropriate calculations, and then evaluate the results in light of their predictions. To test the efficacy of these activities, a pretest quiz was given to approximately 100 students in an allied health/general microbiology course. After a lecture on how microbes are enumerated, students were given a different quiz. The class was then divided randomly into groups of three or four students and assigned one of the activities. A postactivity quiz was also administered. Approximately two weeks later, a serial dilution/plate count question was used on an examination and served as a final posttest. Standardized learning gains were calculated for the quiz administered after each learning activity. Even though learning gains were significantly higher after the lecture, there was also a significant improvement between the lecture and the activity. Using an exercise based on an authentic set of data significantly improved student learning gains, and is a useful practice for teaching microbiology.

  9. A prototype microfluidic platform for miniaturization and automation of serial dilution and dose-response assays.

    PubMed

    Koehler, Jeffrey; Vajjhala, Surekha; Coyne, Courtney; Flynn, Terence; Pezzuto, Marci; Williams, Manda; Levine, Leanna

    2002-11-01

    A novel microfluidic device was designed and developed to miniaturize, multiplex, and automate serial dilution and three-reagent dose-response assays using submicroliter quantities of reagents. This prototype microfluidic device can be used to measure enzyme kinetics and to test a chemical lead's response to a target by fluorescent readout using common plate readers and detection systems. The prototype microfluidic system yielded serial dilution and dose-response assay data comparable to results obtained from manual titrations and reagent additions performed using a microwell plate. Enzyme kinetics were highly reproducible using these devices, although Michaelis-Menten kinetics results differed from those obtained in the microwell plate. In all cases reported here, assays performed on the microfluidic format required lower volumes of reagents compared with the microwell plate. In addition to savings in reagent consumption, the microfluidic devices and bench-top instruments offer additional advantages over conventional solutions, including a small footprint and compatibility with commercially available fluorescence detectors. Future directions for the prototype technology are discussed.

  10. Testing deviation for a set of serial dilution most probable numbers from a Poisson-binomial model.

    PubMed

    Blodgett, Robert J

    2006-01-01

    A serial dilution experiment estimates the microbial concentration in a broth by inoculating several sets of tubes with various amounts of the broth. The estimation uses the Poisson distribution and the number of tubes in each of these sets that show growth. Several factors, such as interfering microbes, toxins, or disaggregation of adhering microbes, may distort the results of a serial dilution experiment. A mild enough distortion may not raise suspicion with a single outcome. The test introduced here judges whether the entire set of serial dilution outcomes appears unusual. This test forms lists of the possible outcomes. The set of outcomes is declared unusual if any occurrence of an observed outcome is on the first list, or more than one is on the first or second list, etc. A similar test can apply when there are only a finite number of possible outcomes, and each outcome has a calculable probability, and few outcomes have tied probabilities.

  11. Correlation of the serial-dilution protamine sulfate test with models of "hypercoagulability" and thrombosis in dogs.

    PubMed

    Francis, P B; Wilson, J E

    1977-04-01

    In a dog model, combinations of venous-injury thrombosis, homologous serum-induced "hypercoagulability," and fibrinolytic blockade were evaluated to determine the factors involved in the generation of a positive serial-dilution protamine sulfate test. Stasis and operative procedures did not produce a positive test. Small local thrombi induced by electrical current produced a positive test that tended to persist only during the initial formation and propagation of the thrombus, and was blocked by pretreatment with epsilon-aminocaproic acid, suggesting in this model that the test was detecting mainly early fibrin degradation products. Homologous serum infusion without venous-injury thrombosis also produced positive serial-dilution protamine sulfate test results that could not be blocked with epsilon-aminocaproic acid suggesting here that the serial-dilution protamine sulfate test was detecting mainly soluble complexes of fibrin monomer rather than early fibrin degradation products. The serial-dilution protamine sulfate test is therefore capable of detecting both small local thrombi and serum-induced "hypercoagulability" without thrombosis in the dog model.

  12. Exploration of the key microbes involved in the cellulolytic activity of a microbial consortium by serial dilution.

    PubMed

    Zhang, Qinghua; Tian, Min; Tang, Lei; Li, Huixing; Li, Wencheng; Zhang, Jianhua; Zhang, Hongjian; Mao, Zhonggui

    2013-03-01

    A highly cellulolytic consortium was serially diluted and incubated in fermentation medium with filter paper as carbon sources. The critical dilution point of the consortium for effective degradation of filter paper was 10(-5) as further dilution resulted in the loss of degradation ability of filter paper accompanied by the disappearance of four bands in denaturing gradient gel electrophoresis profiles. The loss of bands corresponding to 16S rRNA sequences from Clostridium clariflavum DSM 19732 and a Paenibacillus species coincided with the loss of degradation ability of filter paper.

  13. Critical review and meta-analysis of serial agitated dilutions in experimental toxicology.

    PubMed

    Linde, K; Jonas, W B; Melchart, D; Worku, F; Wagner, H; Eitel, F

    1994-07-01

    1. We conducted an overview and quantitative meta-analysis of all experimental literature on the protective effects of serial agitated dilutions (SADs) of toxin preparations. 2. Articles were systematically collected and evaluated for scientific quality using pre-defined methodological criteria and then independently analysed for validity. 3. We found 105 publications exploring the effects of SAD preparations in toxicological systems. 4. The quality of evidence in these studies was low with only 43% achieving one half of the maximum possible quality score and only 31% reported in a fashion that permitted reevaluation of the data. 5. Very few studies were independently replicated using comparable models. 6. Among the high quality studies, positive effects were reported 50% more often than negative effects. 7. Four of 5 outcomes meeting quality and comparability criteria for meta-analysis showed positive effects from SAD preparations. 8. Average percent protection over controls in these preparations was 19.7 (95%Cl 6.2-33.2). 9. Further research with special attention to methodological detail and independent replication should be done.

  14. [Effect of ligand concentration on the precision of determining the parameters of ligand-receptor interaction by serial dilution methods].

    PubMed

    Bobrovnik, S A

    2004-01-01

    Earlier we suggested the method of serial dilution, which allows one to determine the parameters of ligand-receptor interaction even if the reactants are in a mixture and their concentrations are unknown. The method is especially useful if the liability of studied receptor does not allow its separation from corresponding ligand. The important prerequisite of the method's precision is that the concentration of the ligand should be sufficiently high comparing to the concentration of the receptor. In the present paper it was demonstrated that the method allows one to obtain sufficiently good precision even in the case when the concentration of the ligand is only one tenth of the receptor concentration.

  15. Comparison of the serial dilution indicator and intragastric titration methods for measurement of meal-stimulated gastric acid secretion in man.

    PubMed

    Hogan, D L; Turken, D; Stern, A I; Isenberg, J I

    1983-11-01

    Two in vivo methods that permit quantitation of gastric acid secretion immediately after the meal are currently in use: intragastric titration and the serial dilution indicator method. During intragastric titration, intragastric pH is artificially maintained at 5.5 to 7 by the continuous addition of alkali to the gastric contents, while during serial dilution the intragastric pH is permitted to seek its natural pH. This study compared gastric acid secretion and serum gastrin in response to a liquid protein meal measured by both techniques in 10 subjects. Mean (+/- SE) 3-hr acid outputs were almost identical (53.6 +/- 6.0 mmol/3 hr with intragastric titration and 52.0 +/- 8.5 mmol/3 hr with serial dilution indicator). Furthermore, 30 min secretory responses in individual subjects were highly correlated (r = 0.98 +/- 0.01, P less than 0.001). Also, in spite of intragastric pH being less than 1.5 by 90 min after the meal during the serial dilution method, total integrated serum gastrin concentrations after the meal were similar (intragastric titration = 20.6 +/- 7.3 ng min/ml versus serial dilution indicator = 23.5 +/- 9.8 ng min/ml) and individual 30-min gastrins during the two separate tests were highly correlated (r = 0.80 +/- 0.06, P less than 0.01). It is concluded that both meal-stimulated gastric acid secretion and serum gastrin concentrations as measured by intragastric titration and by the serial dilution indicator method produced similar results.

  16. Microfluidic serial dilution cell-based assay for analyzing drug dose response over a wide concentration range.

    PubMed

    Sugiura, Shinji; Hattori, Koji; Kanamori, Toshiyuki

    2010-10-01

    In this paper we report a perfusion culture microchamber array chip with a serial dilution microfluidic network for analyzing drug dose response over a concentration range spanning 6 orders of magnitude, which is required for practical drug discovery applications. The microchamber array chip was equipped with a pressure-driven interface, in which medium and drug solution were added with a micropipet and delivered into the microfluidic network by pneumatic pressure. We demonstrated that the microchamber array chip could be used to estimate the 50% growth inhibitory concentration using the model anticancer drug paclitaxel and the model cancer cell line HeLa. The results obtained by using the microchamber array chip were consistent with those obtained by a conventional assay using microplates. The microchamber array chip, with its simple interface and well-designed microfluidic network, has potential as an efficient platform for high-throughput dose response assays in drug discovery applications.

  17. EMJH medium with 5-fluorouracil and nalidixic acid associated with serial dilution technique used to recover Leptospira spp from experimentally contaminated bovine semen.

    PubMed

    Miraglia, Fabiana; de Moraes, Zenaide Maria; Melville, Priscilla Anne; Dias, Ricardo Augusto; Vasconcellos, Silvio Arruda

    2009-01-01

    Bovine semen experimentally contaminated with Leptospira santarosai serovar Guaricura was submitted to the modified EMJH medium with 5-fluorouracil (300mg/L) and nalidixic acid (20mg/L), named as "selective medium" and using the serial dilution technique, in order to evaluate the percentage of recovery of the added microorganism. The selective EMJH medium was found with higher percentage of recovery of leptospiras and minor losses of samples due to contamination with opportunistic microorganisms than the non-selective EMJH medium: 151/376 (40.0%) of positive growth; and 38/376 (10.0%) contamination and 58/376 (15%) and 129/376 (34.0%), respectively. These results were statistically significant (p<0. 0001; Fisher). Differences were found when the frequencies of positive leptospires recovery have been compared in the serial dilution technique (10(-1) to 10(-4)) between the selective and non-selective media at different dilution factors. At 1/10(th) dilution the percentages found were (0%, 0/80) and (38%, 30/80), at 1/100(th) dilution, (3%, 2/80) and (49%, 39/ 80) and at 1/1,000(th) dilution, (25%, 20/80) and (50%, 40/80), respectively. The percentage of recovery of leptospires was found to be directly proportional to the dilution used. The methodology of the serial dilution technique (setting at least three dilutions) and the use of selective EMJH medium have been found to be efficient for the isolation of leptospires from the bovine semen samples.

  18. EMJH medium with 5-fluorouracil and nalidixic acid associated with serial dilution technique used to recover Leptospira spp from experimentally contaminated bovine semen

    PubMed Central

    Miraglia, Fabiana; de Moraes, Zenaide Maria; Melville, Priscilla Anne; Dias, Ricardo Augusto; Vasconcellos, Silvio Arruda

    2009-01-01

    Bovine semen experimentally contaminated with Leptospira santarosai serovar Guaricura was submitted to the modified EMJH medium with 5-fluorouracil (300mg/L) and nalidixic acid (20mg/L), named as “selective medium” and using the serial dilution technique, in order to evaluate the percentage of recovery of the added microorganism. The selective EMJH medium was found with higher percentage of recovery of leptospiras and minor losses of samples due to contamination with opportunistic microorganisms than the non-selective EMJH medium: 151/376 (40.0%) of positive growth; and 38/376 (10.0%) contamination and 58/376 (15%) and 129/376 (34.0%), respectively. These results were statistically significant (p<0. 0001; Fisher). Differences were found when the frequencies of positive leptospires recovery have been compared in the serial dilution technique (10-1 to 10-4) between the selective and non-selective media at different dilution factors. At 1/10th dilution the percentages found were (0%, 0/80) and (38%, 30/80), at 1/100th dilution, (3%, 2/80) and (49%, 39/ 80) and at 1/1,000th dilution, (25%, 20/80) and (50%, 40/80), respectively. The percentage of recovery of leptospires was found to be directly proportional to the dilution used. The methodology of the serial dilution technique (setting at least three dilutions) and the use of selective EMJH medium have been found to be efficient for the isolation of leptospires from the bovine semen samples. PMID:24031342

  19. Differences in Median Ultraviolet Light Transmissions of Serial Homeopathic Dilutions of Copper Sulfate, Hypericum perforatum, and Sulfur.

    PubMed

    Klein, Sabine D; Sandig, Annegret; Baumgartner, Stephan; Wolf, Ursula

    2013-01-01

    Homeopathic remedies are produced by potentising, that is, the serial logarithmic dilution and succussion of a mother tincture. Techniques like ultraviolet spectroscopy, nuclear magnetic resonance, calorimetry, or thermoluminescence have been used to investigate their physical properties. In this study, homeopathic centesimal (c) potencies (6c to 30c) of copper sulfate, Hypericum perforatum, and sulfur as well as succussed water controls were prepared. Samples of these preparations were exposed to external physical factors like heat, pressure, ultraviolet radiation, or electromagnetic fields to mimic possible everyday storage conditions. The median transmissions from 190 nm to 340 nm and 220 nm to 340 nm were determined by ultraviolet light spectroscopy on five measurement days distributed over several months. Transmissions of controls and potencies of sulfur differed significantly on two of five measurement days and after exposure to physical factors. Transmissions of potencies exposed to ultraviolet light and unexposed potencies of copper sulfate and Hypericum perforatum differed significantly. Potency levels 6c to 30c were also compared, and wavelike patterns of higher and lower transmissions were found. The Kruskal-Wallis test yielded significant differences for the potency levels of all three substances. Aiming at understanding the physical properties of homeopathic preparations, this study confirmed and expanded the findings of previous studies.

  20. Quantifying uncertainty of determination by standard additions and serial dilutions methods taking into account standard uncertainties in both axes.

    PubMed

    Hyk, Wojciech; Stojek, Zbigniew

    2013-06-18

    The analytical expressions for the calculation of the standard uncertainty of the predictor variable either extrapolated or interpolated from a calibration line that takes into account uncertainties in both axes have been derived and successfully verified using the Monte Carlo modeling. These expressions are essential additions to the process of the analyte quantification realized with either the method of standard additions (SAM) or the method of serial dilutions (MSD). The latter one has been proposed as an alternative approach to the SAM procedure. In the MSD approach instead of the sequence of standard additions, the sequence of solvent additions to the spiked sample is performed. The comparison of the calculation results based on the expressions derived to their equivalents obtained from the Monte Carlo simulation, applied to real experimental data sets, confirmed that these expressions are valid in real analytical practice. The estimation of the standard uncertainty of the analyte concentration, quantified via either SAM or MSD or simply a calibration curve, is of great importance for the construction of the uncertainty budget of an analytical procedure. The correct estimation of the standard uncertainty of the analyte concentration is a key issue in the quality assurance in the instrumental analysis.

  1. Differences in Median Ultraviolet Light Transmissions of Serial Homeopathic Dilutions of Copper Sulfate, Hypericum perforatum, and Sulfur

    PubMed Central

    Klein, Sabine D.; Sandig, Annegret; Baumgartner, Stephan; Wolf, Ursula

    2013-01-01

    Homeopathic remedies are produced by potentising, that is, the serial logarithmic dilution and succussion of a mother tincture. Techniques like ultraviolet spectroscopy, nuclear magnetic resonance, calorimetry, or thermoluminescence have been used to investigate their physical properties. In this study, homeopathic centesimal (c) potencies (6c to 30c) of copper sulfate, Hypericum perforatum, and sulfur as well as succussed water controls were prepared. Samples of these preparations were exposed to external physical factors like heat, pressure, ultraviolet radiation, or electromagnetic fields to mimic possible everyday storage conditions. The median transmissions from 190 nm to 340 nm and 220 nm to 340 nm were determined by ultraviolet light spectroscopy on five measurement days distributed over several months. Transmissions of controls and potencies of sulfur differed significantly on two of five measurement days and after exposure to physical factors. Transmissions of potencies exposed to ultraviolet light and unexposed potencies of copper sulfate and Hypericum perforatum differed significantly. Potency levels 6c to 30c were also compared, and wavelike patterns of higher and lower transmissions were found. The Kruskal-Wallis test yielded significant differences for the potency levels of all three substances. Aiming at understanding the physical properties of homeopathic preparations, this study confirmed and expanded the findings of previous studies. PMID:23401712

  2. [Determining the parameters for receptor-ligand interaction by serial dilution method for the case when the ligand and receptor are in a pre-existing mixture].

    PubMed

    Bobrovnik, S A

    2005-01-01

    New methods of determining the binding parameters for ligand-receptor interaction are considered. The considered approaches are based on the earlier suggested method of serial dilution and application of so-called coordinates of dilution. It was shown that the suggested methods allow to evaluate affinity constant and ligand concentration even for the case, when the receptor and corresponding ligand of unknown concentration are in a mixture and their separation from each other is impossible. In this connection the suggested methods are especially useful for studying the ligand-receptor interaction if the receptor is very liable and its purification from the ligand would cause drastic changes of its binding properties.

  3. Serial Wars

    ERIC Educational Resources Information Center

    Van Orsdel, Lee C.; Born, Kathleen

    2007-01-01

    In a year filled with drama and hyperbole, the serials marketplace churned toward a future whose shape is the subject of fierce debate. Forecasts from commercial publishers touting collapse and disaster seemed oddly out of sync with the profits they enjoyed--around 25 percent on average. Nevertheless, in a market where prices continued to rise and…

  4. Splenectomy Causes 10-Fold Increased Risk of Portal Venous System Thrombosis in Liver Cirrhosis Patients

    PubMed Central

    Qi, Xingshun; Han, Guohong; Ye, Chun; Zhang, Yongguo; Dai, Junna; Peng, Ying; Deng, Han; Li, Jing; Hou, Feifei; Ning, Zheng; Zhao, Jiancheng; Zhang, Xintong; Wang, Ran; Guo, Xiaozhong

    2016-01-01

    Background Portal venous system thrombosis (PVST) is a life-threatening complication of liver cirrhosis. We conducted a retrospective study to comprehensively analyze the prevalence and risk factors of PVST in liver cirrhosis. Material/Methods All cirrhotic patients without malignancy admitted between June 2012 and December 2013 were eligible if they underwent contrast-enhanced CT or MRI scans. Independent predictors of PVST in liver cirrhosis were calculated in multivariate analyses. Subgroup analyses were performed according to the severity of PVST (any PVST, main portal vein [MPV] thrombosis >50%, and clinically significant PVST) and splenectomy. Odds ratios (ORs) and 95% confidence intervals (CIs) were reported. Results Overall, 113 cirrhotic patients were enrolled. The prevalence of PVST was 16.8% (19/113). Splenectomy (any PVST: OR=11.494, 95%CI=2.152–61.395; MPV thrombosis >50%: OR=29.987, 95%CI=3.247–276.949; clinically significant PVST: OR=40.415, 95%CI=3.895–419.295) and higher hemoglobin (any PVST: OR=0.974, 95%CI=0.953–0.996; MPV thrombosis >50%: OR=0.936, 95%CI=0.895–0.980; clinically significant PVST: OR=0.935, 95%CI=0.891–0.982) were the independent predictors of PVST. The prevalence of PVST was 13.3% (14/105) after excluding splenectomy. Higher hemoglobin was the only independent predictor of MPV thrombosis >50% (OR=0.952, 95%CI=0.909–0.997). No independent predictors of any PVST or clinically significant PVST were identified in multivariate analyses. Additionally, PVST patients who underwent splenectomy had a significantly higher proportion of clinically significant PVST but lower MELD score than those who did not undergo splenectomy. In all analyses, the in-hospital mortality was not significantly different between cirrhotic patient with and without PVST. Conclusions Splenectomy may increase by at least 10-fold the risk of PVST in liver cirrhosis independent of severity of liver dysfunction. PMID:27432511

  5. Dilution Confusion: Conventions for Defining a Dilution

    ERIC Educational Resources Information Center

    Fishel, Laurence A.

    2010-01-01

    Two conventions for preparing dilutions are used in clinical laboratories. The first convention defines an "a:b" dilution as "a" volumes of solution A plus "b" volumes of solution B. The second convention defines an "a:b" dilution as "a" volumes of solution A diluted into a final volume of "b". Use of the incorrect dilution convention could affect…

  6. Developments in Serials: 1977

    ERIC Educational Resources Information Center

    James, John R.

    1978-01-01

    Discusses issues and developments relating to several aspects of serials, including economics and acquisitions; bibliographic control; automation; education; serials literature and bibliographies; and copyrights. A bibliography is included. (Author/MBR)

  7. Serials in Review: 1972

    ERIC Educational Resources Information Center

    Ashford, Daisy

    1973-01-01

    Major trends in the processing and acquisition of serials during 1972 are reviewed. Principal events were the Williams and Wilkins controversy, the tripling of serials cataloging production at the Library of Congress and progress towards a machine-readable source of serial cataloging information. (23 references) (SM)

  8. Automated Serials Control System.

    ERIC Educational Resources Information Center

    Pan, Elizabeth

    In 1967, the New York State Library at Albany (NYSL) developed a tape-oriented, off-line serials control system for 10,000 active titles. The system would perform all the serials control functions: bibliographic control, check-in of current receipts, claiming for gaps in receipts and late issues, binding notification for completed sets,…

  9. HIPPI/Serial-HIPPI

    SciTech Connect

    Tolmie, D.E. ); Halvorson, M.G. )

    1991-01-01

    The High-Performance Parallel Interface (HIPPI) is a simple high-performance, point-to-point channel for transmitting digital data at peak data rates of 800 or 1600 Mbit/S. The transmission distance between data processing equipment using copper cabling can be up to 25 meters. This distance may be increased by using a Serial-HIPPI extender. This paper describes the HIPPI channel, the choices considered for a serial extender, and the resulting agreement for the Serial-HIPPI specification. 5 refs., 4 figs.

  10. Drug susceptibility testing by dilution methods.

    PubMed

    Jeannot, Katy; Plésiat, Patrick

    2014-01-01

    Serial twofold dilution methods are widely used to assess the bacteriostatic activities of antibiotics. This can be achieved by dilution of considered drugs in agar medium or in culture broth, and inoculation by calibrated inoculums. Although seemingly simple, these methods are greatly influenced by the experimental conditions used and may lead to discrepant results, in particular with untrained investigators. The present step-by-step protocol has been validated for Pseudomonas species, including P. aeruginosa. Introduction of appropriate control strains is crucial to ascertain minimal inhibitory concentration values and compare the results of independent experiments.

  11. Classifying serial killers.

    PubMed

    Promish, D I; Lester, D

    1999-11-01

    We attempted to match the appearance and demeanor of 27 serial killers to the postmortem 'signatures' found on their victims' bodies. Our results suggest that a link may exist between postmortem signatures and two complementary appearance-demeanor types.

  12. Thermodynamics of Dilute Solutions.

    ERIC Educational Resources Information Center

    Jancso, Gabor; Fenby, David V.

    1983-01-01

    Discusses principles and definitions related to the thermodynamics of dilute solutions. Topics considered include dilute solution, Gibbs-Duhem equation, reference systems (pure gases and gaseous mixtures, liquid mixtures, dilute solutions), real dilute solutions (focusing on solute and solvent), terminology, standard states, and reference systems.…

  13. Serial interprocessor communications system

    SciTech Connect

    Labiak, W.; Siemens, P.; Bailey, C.

    1980-04-03

    A serial communications system based on the EIA RS232-C standard with modem control lines has been developed. The DLV11-E interface is used for this purpose. All handshaking is done with the modem control lines. This allows totally independent full duplex communication. The message format consists of eight bit data with odd parity and a sixteen bit checksum on the whole message. All communications are fully interrupt driven. A program was written to load a program into a remote LSI-11 using the serial line without bootstrap ROM.

  14. The Effect of Dilution on the Structure of Microbial Communities

    NASA Technical Reports Server (NTRS)

    Mills, Aaron L.

    2000-01-01

    To determine how dilution of microbial communities affects the diversity of the diluted assemblage a series of numerical simulations were conducted that determined the theoretical change in diversity, richness, and evenness of the community with serial dilution. The results of the simulation suggested that the effects are non linear with a high degree of dependence on the initial evenness of the community being diluted. A series of incubation experiments using a range of dilutions of raw sewage as an inoculum into sterile sewage was used for comparison to the simulations. The diluted communities were maintained in batch fed reactors (three day retention time) for nine days. The communities were harvested and examined by conventional plating and by molecular analysis of the whole-community DNA using AFLP and T-RFLP. Additional, CLPP analysis was also applied. The effects on richness predicted by the numerical simulations were confirmed by the analyses used. The diluted communities fell into three groups, a low dilution, intermediate dilution, and high dilution group, which corresponded well with the groupings obtained for community richness in simulation. The grouping demonstrated the non-linear nature of dilution of whole communities. Furthermore, the results implied that the undiluted community consisted of a few dominant types accompanied by a number of rare (low abundance) types as is typical in unevenly distributed communities.

  15. Serial Services 1992.

    ERIC Educational Resources Information Center

    Shroyer, Andrew; Nanna, Laura

    1992-01-01

    This 1992 price index for serial services presents data on the number of titles, average price, percent of price change, and price indexed to 1977 for the following areas: business; general and humanities; law; science and technology; social sciences; U.S. documents; and H.W. Wilson services. (MES)

  16. Serial interface controller

    SciTech Connect

    Kandasamy, A.

    1995-04-14

    The idea of building a Serial Interface Controller (SIC) proposed by Paul O`Connor, Instrumentation Division, BNL is to determine the feasibility of incorporating a Serial Interface Controlled CMOS IC`s for charge amplification, shaping, analog storage and multiplexing used in particle detectors for high energy physics experiments. The serial data pumped into the CMOS ICs will be used to control many circuit parameters like digitally controlled gain, shaping time, precision preamplifier calibration circuits and many other parameters like timing discriminators mode of operation. The SIC board built will be tested on a Serial Interface Controlled Digital - to - Analog Convertor, which follows either Motorola`s SPI/QSPI or National Semiconductors Microwire interface technique. The DAC chosen for this was MAXIM`s MAX537, a Quad, 12-bit DAC. The function of this controller can be achieved by using some on-shelf micro-controllers like the Motorola`s MC68HC11, which offers dedicated SPI ports. The drawback encountered in using this controller is the overhead involved in putting together an user interface where the user can dynamically change its settings and load the SIC device. This is very critical in testing fewer number of CMOS IC`s having SIC. The SIC board described here takes care of this dynamic user interface issue.

  17. The Serials Marketplace.

    ERIC Educational Resources Information Center

    Treadwell, Jane; Ketcham, Lee

    1991-01-01

    Discusses the results of a national survey of libraries, publishers, and subscription agents that was conducted by the American Library Association (ALA) to address concerns about serials prices. Highlights include library budget trends; resource sharing; selection decisions; library automation; pricing practices of publishers; publisher services;…

  18. Suicide in serial killers.

    PubMed

    Lester, David; White, John

    2010-02-01

    In a sample of 248 killers of two victims in America from 1900 to 2005, obtained from an encyclopedia of serial killers by Newton (2006), those completing suicide did not differ in sex, race, or the motive for the killing from those who were arrested.

  19. Serial Radiohippurate Renal Scintiphotography

    PubMed Central

    Rosenthall, Leonard; Greyson, N. David; Martin, Robert H.

    1970-01-01

    The results of serial radiohippurate scintiphotography in 222 patients are analyzed. The findings in various renal diseases are discussed and compared with those obtained from the excretory urogram, BUN, serum creatinine and creatinine clearance. ImagesFIG. 1FIG. 2FIG. 3FIG. 4aFIG. 4bFIG. 5aFIG. 5b PMID:5536740

  20. Second premolar serial extraction.

    PubMed

    Joondeph, D R; Riedel, R A

    1976-02-01

    Serial extraction of mandibular second premolars should be considered if they are impacted or in cases with moderate arch length deficiency combined with an absence of dentofacial protrusion. The favorable dental changes associated with this approach greatly minimize future orthodontic treatment complexity and time.

  1. Suicide in serial killers.

    PubMed

    Lester, David; White, John

    2010-02-01

    In a sample of 248 killers of two victims in America from 1900 to 2005, obtained from an encyclopedia of serial killers by Newton (2006), those completing suicide did not differ in sex, race, or the motive for the killing from those who were arrested. PMID:20402450

  2. Classifying serial killers.

    PubMed

    Promish, D I; Lester, D

    1999-11-01

    We attempted to match the appearance and demeanor of 27 serial killers to the postmortem 'signatures' found on their victims' bodies. Our results suggest that a link may exist between postmortem signatures and two complementary appearance-demeanor types. PMID:10643649

  3. Stress in Harmonic Serialism

    ERIC Educational Resources Information Center

    Pruitt, Kathryn Ringler

    2012-01-01

    This dissertation proposes a model of word stress in a derivational version of Optimality Theory (OT) called Harmonic Serialism (HS; Prince and Smolensky 1993/2004, McCarthy 2000, 2006, 2010a). In this model, the metrical structure of a word is derived through a series of optimizations in which the "best" metrical foot is chosen…

  4. Malaysian Serials: Issues and Problems.

    ERIC Educational Resources Information Center

    Bahri, Che Norma

    This paper analyzes the issues and problems while looking at the trends and developments of serials publishing in Malaysia. The first section provides background; topics addressed include the country and people of Malaysia, the history of serials publishing in Malaysia, categories and formats of serials publishing, academic publications,…

  5. Composition during serial learning: a serial position effect.

    PubMed

    Frensch, P A

    1994-03-01

    Composition is a computational learning mechanism that merges serially performed elementary processes into hierarchically organized knowledge structures. The main goals of this research were to explore (a) the role of serial position in composition and (b) the relation between degree of composition and explicit serial recall in serial learning. In 3 experiments, Ss performed a rule-based serial reaction time task in which they had to categorize a sequence of 12 stimuli shown simultaneously on a video monitor. A procedure based on the comparison of reaction times to random sequences and a repeating sequence identified a serial position effect of composition that was, however, moderated by Ss' explicit, postexperimental recall of the repeating sequence. A production-system-based computational model of composition is described that qualitatively reproduces the empirical findings. Implications for the mechanisms governing serial learning are discussed.

  6. Delaware's first serial killer.

    PubMed

    Inguito, G B; Sekula-Perlman, A; Lynch, M J; Callery, R T

    2000-11-01

    The violent murder of Shirley Ellis on November 29, 1987, marked the beginning of the strange and terrible tale of Steven Bryan Pennell's reign as the state of Delaware's first convicted serial killer. Three more bodies followed the first victim, and all had been brutally beaten and sadistically tortured. The body of a fifth woman has never been found. State and county police collaborated with the FBI to identify and hunt down their suspect, forming a task force of over 100 officers and spending about one million dollars. Through their knowledge and experience with other serial killers, the FBI was able to make an amazingly accurate psychological profile of Delaware's serial killer. After months of around-the-clock surveillance, Steven Pennell was arrested on November 29, 1988, one year to the day after the first victim was found. Pennell was found guilty in the deaths of the first two victims on November 29, 1989, and plead no contest to the murder of two others on October 30, 1991. Still maintaining his innocence, he asked for the death penalty so that he could spare his family further agony. Steven Pennell was executed by lethal injection on March 15, 1992.

  7. Delaware's first serial killer.

    PubMed

    Inguito, G B; Sekula-Perlman, A; Lynch, M J; Callery, R T

    2000-11-01

    The violent murder of Shirley Ellis on November 29, 1987, marked the beginning of the strange and terrible tale of Steven Bryan Pennell's reign as the state of Delaware's first convicted serial killer. Three more bodies followed the first victim, and all had been brutally beaten and sadistically tortured. The body of a fifth woman has never been found. State and county police collaborated with the FBI to identify and hunt down their suspect, forming a task force of over 100 officers and spending about one million dollars. Through their knowledge and experience with other serial killers, the FBI was able to make an amazingly accurate psychological profile of Delaware's serial killer. After months of around-the-clock surveillance, Steven Pennell was arrested on November 29, 1988, one year to the day after the first victim was found. Pennell was found guilty in the deaths of the first two victims on November 29, 1989, and plead no contest to the murder of two others on October 30, 1991. Still maintaining his innocence, he asked for the death penalty so that he could spare his family further agony. Steven Pennell was executed by lethal injection on March 15, 1992. PMID:11125664

  8. Chromogenic assay of human coagulation factor VIII: statistical comparison of 2 working dilution procedures.

    PubMed

    Alonso, C; Gonzalez, A; Frutos, G

    2005-08-01

    The effect of 2 different practices for preparation of working dilutions in the chromogenic substrate method for potency assay of factor VIII was evaluated. In this study the potency of several concentrate materials was shown to be statistically equivalent, whether performing the assay with independent or serial working dilutions.

  9. The mathematics of dilution.

    PubMed

    Chatterjee, Barun Kumar

    2014-04-01

    The major objection to homeopathic medicine is that the doses of medicine prescribed in some cases are too dilute for any active ingredient to be present. The medicines would hence be rendered inactive, necessitating novel explanations for the action. A further examination of dilution in the light of the Langmuir equation shows that homeopathic medicines may not be as dilute as a simplistic application of Avogadro's Principle suggests, due to surface effects.

  10. Serial replica exchange.

    PubMed

    Hagen, Morten; Kim, Byungchan; Liu, Pu; Friesner, Richard A; Berne, B J

    2007-02-15

    Parallel tempering (or the replica exchange method (REM)) is a powerful method for speeding up the sampling of conformational states of systems with rough energy landscapes, like proteins, where stable conformational states can be separated by large energy barriers. The usual implementation of the REM is performed on local computer clusters (or parallel processors) where the different replicas must be run synchronously. Here, we present serial replica exchange (SREM), a method that is equivalent to the standard REM in terms of efficiency yet runs asynchronously on a distributed network of computers. A second advantage is the method's greatly enhanced fault tolerance, which enables the study of biological systems on worldwide distributed computing environments, such as Folding@Home. For proof of concept, we apply the SREM to a single alanine dipeptide molecule in explicit water. We show that the SREM reproduces the thermodynamic and structural properties determined by the REM.

  11. Serial Replica Exchange

    PubMed Central

    Hagen, Morten; Kim, Byungchan; Liu, Pu; Friesner, Richard A.; Berne, B. J.

    2009-01-01

    Parallel tempering (or the replica exchange method (REM)) is a powerful method for speeding up the sampling of conformational states of systems with rough energy landscapes, like proteins, where stable conformational states can be separated by large energy barriers. The usual implementation of the REM is performed on local computer clusters (or parallel processors) where the different replicas must be run synchronously. Here, we present serial replica exchange (SREM), a method that is equivalent to the standard REM in terms of efficiency yet runs asynchronously on a distributed network of computers. A second advantage is the method’s greatly enhanced fault tolerance, which enables the study of biological systems on worldwide distributed computing environments, such as Folding@Home.1 For proof of concept, we apply the SREM to a single alanine dipeptide molecule in explicit water. We show that the SREM reproduces the thermodynamic and structural properties determined by the REM. PMID:17249714

  12. Measuring dilution of microbicide gels with optical imaging.

    PubMed

    Drake, Tyler K; Shah, Tejen; Peters, Jennifer J; Wax, Adam; Katz, David F

    2013-01-01

    We present a novel approach for measuring topical microbicide gel dilution using optical imaging. The approach compares gel thickness measurements from fluorimetry and multiplexed low coherence interferometry in order to calculate dilution of a gel. As a microbicide gel becomes diluted at fixed thickness, its mLCI thickness measurement remains constant, while the fluorimetry signal decreases in intensity. The difference between the two measurements is related to the extent of gel dilution. These two optical modalities are implemented in a single endoscopic instrument that enables simultaneous data collection. A preliminary validation study was performed with in vitro placebo gel measurements taken in a controlled test socket. It was found that change in slope of the regression line between fluorimetry and mLCI based measurements indicates dilution. A dilution calibration curve was then generated by repeating the test socket measurements with serial dilutions of placebo gel with vaginal fluid simulant. This methodology can provide valuable dilution information on candidate microbicide products, which could substantially enhance our understanding of their in vivo functioning.

  13. A bit serial sequential circuit

    NASA Technical Reports Server (NTRS)

    Hu, S.; Whitaker, S.

    1990-01-01

    Normally a sequential circuit with n state variables consists of n unique hardware realizations, one for each state variable. All variables are processed in parallel. This paper introduces a new sequential circuit architecture that allows the state variables to be realized in a serial manner using only one next state logic circuit. The action of processing the state variables in a serial manner has never been addressed before. This paper presents a general design procedure for circuit construction and initialization. Utilizing pass transistors to form the combinational next state forming logic in synchronous sequential machines, a bit serial state machine can be realized with a single NMOS pass transistor network connected to shift registers. The bit serial state machine occupies less area than other realizations which perform parallel operations. Moreover, the logical circuit of the bit serial state machine can be modified by simply changing the circuit input matrix to develop an adaptive state machine.

  14. Specific binding of gibberellic acid by cytokinin-specific binding proteins: a new aspect of plant hormone-binding proteins with the PR-10 fold.

    PubMed

    Ruszkowski, Milosz; Sliwiak, Joanna; Ciesielska, Agnieszka; Barciszewski, Jakub; Sikorski, Michal; Jaskolski, Mariusz

    2014-07-01

    Pathogenesis-related proteins of class 10 (PR-10) are a family of plant proteins with the same fold characterized by a large hydrophobic cavity that allows them to bind various ligands, such as phytohormones. A subfamily with only ~20% sequence identity but with a conserved canonical PR-10 fold have previously been recognized as Cytokinin-Specific Binding Proteins (CSBPs), although structurally the binding mode of trans-zeatin (a cytokinin phytohormone) was found to be quite diversified. Here, it is shown that two CSBP orthologues from Medicago truncatula and Vigna radiata bind gibberellic acid (GA3), which is an entirely different phytohormone, in a conserved and highly specific manner. In both cases a single GA3 molecule is found in the internal cavity of the protein. The structural data derived from high-resolution crystal structures are corroborated by isothermal titration calorimetry (ITC), which reveals a much stronger interaction with GA3 than with trans-zeatin and pH dependence of the binding profile. As a conclusion, it is postulated that the CSBP subfamily of plant PR-10 proteins should be more properly linked with general phytohormone-binding properties and termed phytohormone-binding proteins (PhBP).

  15. The copper-mobilizing-potential of dissolved organic matter in soils varies 10-fold depending on soil incubation and extraction procedures.

    PubMed

    Amery, Fien; Degryse, Fien; Degeling, Wim; Smolders, Erik; Merckx, Roel

    2007-04-01

    Copper is mobilized in soil by dissolved organic matter (DOM) but the role of DOM quality in this process is unclear. A one-step resin-exchange method was developed to measure the Cu-Mobilizing-Potential (CuMP) of DOM at pCu 11.3 and pH 7.0, representing background values. The CuMP of DOM was measured in soil solutions of 13 uncontaminated soils with different DOM extraction methods. The CuMP, expressed per unit dissolved organic carbon (DOC), varied 10-fold and followed the order water extracts > 0.01 M CaCl2 extracts > pore water. Soil solutions, obtained from soils that were stored air-dry for a long time or were subjected to drying-wetting cycles, had elevated DOC concentration, but the DOM had a low CuMP. Prolonged soil incubations decreased the DOC concentration and increased the CuMP, suggesting that most of the initially elevated DOM is less humified and has lower Cu affinity than DOM remaining after incubation. A significant positive correlation between the specific UV-absorption of DOM (indicating aromaticity) and CuMP was found for all DOM samples (R(2) = 0.58). It is concluded that the DOC concentration in soil is an insufficient predictor for the Cu mobilization and that DOM samples isolated from air-dried soils are distinct from those of soils kept moist. PMID:17438775

  16. Serial Network Flow Monitor

    NASA Technical Reports Server (NTRS)

    Robinson, Julie A.; Tate-Brown, Judy M.

    2009-01-01

    Using a commercial software CD and minimal up-mass, SNFM monitors the Payload local area network (LAN) to analyze and troubleshoot LAN data traffic. Validating LAN traffic models may allow for faster and more reliable computer networks to sustain systems and science on future space missions. Research Summary: This experiment studies the function of the computer network onboard the ISS. On-orbit packet statistics are captured and used to validate ground based medium rate data link models and enhance the way that the local area network (LAN) is monitored. This information will allow monitoring and improvement in the data transfer capabilities of on-orbit computer networks. The Serial Network Flow Monitor (SNFM) experiment attempts to characterize the network equivalent of traffic jams on board ISS. The SNFM team is able to specifically target historical problem areas including the SAMS (Space Acceleration Measurement System) communication issues, data transmissions from the ISS to the ground teams, and multiple users on the network at the same time. By looking at how various users interact with each other on the network, conflicts can be identified and work can begin on solutions. SNFM is comprised of a commercial off the shelf software package that monitors packet traffic through the payload Ethernet LANs (local area networks) on board ISS.

  17. Helium dilution refrigeration system

    DOEpatents

    Roach, Patrick R.; Gray, Kenneth E.

    1988-01-01

    A helium dilution refrigeration system operable over a limited time period, and recyclable for a next period of operation. The refrigeration system is compact with a self-contained pumping system and heaters for operation of the system. A mixing chamber contains .sup.3 He and .sup.4 He liquids which are precooled by a coupled container containing .sup.3 He liquid, enabling the phase separation of a .sup.3 He rich liquid phase from a dilute .sup.3 He-.sup.4 He liquid phase which leads to the final stage of a dilution cooling process for obtaining low temperatures. The mixing chamber and a still are coupled by a fluid line and are maintained at substantially the same level with the still cross sectional area being smaller than that of the mixing chamber. This configuration provides maximum cooling power and efficiency by the cooling period ending when the .sup.3 He liquid is depleted from the mixing chamber with the mixing chamber nearly empty of liquid helium, thus avoiding unnecessary and inefficient cooling of a large amount of the dilute .sup.3 He-.sup.4 He liquid phase.

  18. Helium dilution refrigeration system

    DOEpatents

    Roach, P.R.; Gray, K.E.

    1988-09-13

    A helium dilution refrigeration system operable over a limited time period, and recyclable for a next period of operation is disclosed. The refrigeration system is compact with a self-contained pumping system and heaters for operation of the system. A mixing chamber contains [sup 3]He and [sup 4]He liquids which are precooled by a coupled container containing [sup 3]He liquid, enabling the phase separation of a [sup 3]He rich liquid phase from a dilute [sup 3]He-[sup 4]He liquid phase which leads to the final stage of a dilution cooling process for obtaining low temperatures. The mixing chamber and a still are coupled by a fluid line and are maintained at substantially the same level with the still cross sectional area being smaller than that of the mixing chamber. This configuration provides maximum cooling power and efficiency by the cooling period ending when the [sup 3]He liquid is depleted from the mixing chamber with the mixing chamber nearly empty of liquid helium, thus avoiding unnecessary and inefficient cooling of a large amount of the dilute [sup 3]He-[sup 4]He liquid phase. 2 figs.

  19. Dilution, Concentration, and Flotation

    ERIC Educational Resources Information Center

    Liang, Ling; Schmuckler, Joseph S.

    2004-01-01

    As both classroom teaching practice and literature show, many students have difficulties learning science concepts such as density. Here are some investigations that identify the relationship between density and floating through experimenting with successive dilution of a liquid, or the systematic change of concentration of a saltwater solution.…

  20. Serial Input Output

    SciTech Connect

    Waite, Anthony; /SLAC

    2011-09-07

    Serial Input/Output (SIO) is designed to be a long term storage format of a sophistication somewhere between simple ASCII files and the techniques provided by inter alia Objectivity and Root. The former tend to be low density, information lossy (floating point numbers lose precision) and inflexible. The latter require abstract descriptions of the data with all that that implies in terms of extra complexity. The basic building blocks of SIO are streams, records and blocks. Streams provide the connections between the program and files. The user can define an arbitrary list of streams as required. A given stream must be opened for either reading or writing. SIO does not support read/write streams. If a stream is closed during the execution of a program, it can be reopened in either read or write mode to the same or a different file. Records represent a coherent grouping of data. Records consist of a collection of blocks (see next paragraph). The user can define a variety of records (headers, events, error logs, etc.) and request that any of them be written to any stream. When SIO reads a file, it first decodes the record name and if that record has been defined and unpacking has been requested for it, SIO proceeds to unpack the blocks. Blocks are user provided objects which do the real work of reading/writing the data. The user is responsible for writing the code for these blocks and for identifying these blocks to SIO at run time. To write a collection of blocks, the user must first connect them to a record. The record can then be written to a stream as described above. Note that the same block can be connected to many different records. When SIO reads a record, it scans through the blocks written and calls the corresponding block object (if it has been defined) to decode it. Undefined blocks are skipped. Each of these categories (streams, records and blocks) have some characteristics in common. Every stream, record and block has a name with the condition that each

  1. A simplified semiquantitative determination of hepatitis C virus genome molecules by the end-point dilution method.

    PubMed

    Bathelier, C; Mercier, G; Lucotte, G

    1996-12-01

    We describe a semiquantitative method to measure hepatitis C virus (HCV) viral particle numbers, by carrying out reverse-transcription polymerase chain reaction (RT-PCR) on serial dilutions of serum samples. The virus concentrations measured were 10(3)-10(6) viral particles ml-1 of serum. The method described is relatively quick, and the only required manipulation is dilution of the serum. An optimal RT-PCR method is used for diluted and undiluted samples.

  2. Bit-serial neuroprocessor architecture

    NASA Technical Reports Server (NTRS)

    Tawel, Raoul (Inventor)

    2001-01-01

    A neuroprocessor architecture employs a combination of bit-serial and serial-parallel techniques for implementing the neurons of the neuroprocessor. The neuroprocessor architecture includes a neural module containing a pool of neurons, a global controller, a sigmoid activation ROM look-up-table, a plurality of neuron state registers, and a synaptic weight RAM. The neuroprocessor reduces the number of neurons required to perform the task by time multiplexing groups of neurons from a fixed pool of neurons to achieve the successive hidden layers of a recurrent network topology.

  3. Implementing a Serials Barcoding Project.

    ERIC Educational Resources Information Center

    Lennertz, Lora L.; Conway, Cheryl L.

    1997-01-01

    Discusses the process of planning and implementing a barcode project for library serials based on experiences at the University of Arkansas Fayetteville library. Topics include dumb versus smart barcodes, cataloging, classification, application rate of barcode labels, and library staff participation. (Author/LRW)

  4. The Serial Process in Visual Search

    ERIC Educational Resources Information Center

    Gilden, David L.; Thornton, Thomas L.; Marusich, Laura R.

    2010-01-01

    The conditions for serial search are described. A multiple target search methodology (Thornton & Gilden, 2007) is used to home in on the simplest target/distractor contrast that effectively mandates a serial scheduling of attentional resources. It is found that serial search is required when (a) targets and distractors are mirror twins, and (b)…

  5. Serials Control System Procedures and Policies.

    ERIC Educational Resources Information Center

    Schlembach, Mary C.

    This document includes procedures and policies for a networked serials control system originally developed at the Grainger Engineering Library Information Center at the University of Illinois at Urbana-Champaign (UIUC). The serials control systems encompass serials processing, public service, and end-user functions. The system employs a…

  6. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the...

  7. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Serial number. 3280.6 Section 3280... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.6 Serial number. (a) A manufactured home serial number which will identify the manufacturer and the state in which the...

  8. Diluted magnetic semiconductors

    NASA Astrophysics Data System (ADS)

    Anderson, James R.

    1990-03-01

    Growth and physical properties of diluted magnetic semiconductors (DMS) were investigated. Growth included Bridgman, solid state recrystallization, and liquid phase epitaxy of Mercury(1-x)Manganese(x)Telluride and Mercury(1-x-y)Manganese(x)Cadmium(y)Telluride. Very uniform crystals were produced by solid state recrystallization. Physical properties studied included magnetization, optical response, and magnetotransport. From magnetization, the exchange interactions among magnetic ions have been deduced. Modulated spectroscopy gave details of the electronic structure of DMS and the quality of the material was indicated by the line widths. Magnetotransport, carried out in some cases to 30 T, showed a large negative magnetoresistance and subsequent increase. The Hg(1-x-y)Mn(x)Cd(y)Te has considerable promise for avalanche photodiodes between 1.2 and 1.8 micrometers.

  9. Dilution jet mixing program

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Coleman, E.; Johnson, K.

    1984-01-01

    Parametric tests were conducted to quantify the mixing of opposed rows of jets (two-sided injection) in a confined cross flow. Results show that jet penetrations for two sided injections are less than that for single-sided injections, but the jet spreading rates are faster for a given momentum ratio and orifice plate. Flow area convergence generally enhances mixing. Mixing characteristics with asymmetric and symmetric convergence are similar. For constant momentum ratio, the optimum S/H(0) with in-line injections is one half the optimum value for single sided injections. For staggered injections, the optimum S/H(0) is twice the optimum value for single-sided injection. The correlations developed predicted the temperature distributions within first order accuracy and provide a useful tool for predicting jet trajectory and temperature profiles in the dilution zone with two-sided injections.

  10. Serial dependence in visual perception.

    PubMed

    Fischer, Jason; Whitney, David

    2014-05-01

    Visual input often arrives in a noisy and discontinuous stream, owing to head and eye movements, occlusion, lighting changes, and many other factors. Yet the physical world is generally stable; objects and physical characteristics rarely change spontaneously. How then does the human visual system capitalize on continuity in the physical environment over time? We found that visual perception in humans is serially dependent, using both prior and present input to inform perception at the present moment. Using an orientation judgment task, we found that, even when visual input changed randomly over time, perceived orientation was strongly and systematically biased toward recently seen stimuli. Furthermore, the strength of this bias was modulated by attention and tuned to the spatial and temporal proximity of successive stimuli. These results reveal a serial dependence in perception characterized by a spatiotemporally tuned, orientation-selective operator-which we call a continuity field-that may promote visual stability over time.

  11. The fallacy of serial extractions.

    PubMed

    Lee, K Paul

    2013-11-01

    It is suggested that lingually-positioned lower lateral incisors in young children are anatomically correct and not a symptom of crowding. Primary canines with intact periodontal attachments have an important role to play as proprioceptors to encourage growth of the alveolar arch. Extractions of primary cuspids would deprive the alveolus of important growth stimuli. Clinical evidence suggests that serial extraction is counter-productive. The early extraction of primary cuspids will invariably result in crowding of the permanent cuspids. It is a common belief that serial extraction corrects the crowding of lower incisors but the procedure is not evidence based. In reality, the problem is maintained and the 'crowding' shifts to involve the permanent cuspids. Let us not forget the most basic canon of the health profession which is 'first do no harm, and if it is not broken, do not try to fix it'.

  12. The fallacy of serial extractions.

    PubMed

    Lee, K Paul

    2013-11-01

    It is suggested that lingually-positioned lower lateral incisors in young children are anatomically correct and not a symptom of crowding. Primary canines with intact periodontal attachments have an important role to play as proprioceptors to encourage growth of the alveolar arch. Extractions of primary cuspids would deprive the alveolus of important growth stimuli. Clinical evidence suggests that serial extraction is counter-productive. The early extraction of primary cuspids will invariably result in crowding of the permanent cuspids. It is a common belief that serial extraction corrects the crowding of lower incisors but the procedure is not evidence based. In reality, the problem is maintained and the 'crowding' shifts to involve the permanent cuspids. Let us not forget the most basic canon of the health profession which is 'first do no harm, and if it is not broken, do not try to fix it'. PMID:24380143

  13. Nanoflow electrospinning serial femtosecond crystallography

    SciTech Connect

    Sierra, Raymond G.; Laksmono, Hartawan; Kern, Jan; Tran, Rosalie; Hattne, Johan; Alonso-Mori, Roberto; Lassalle-Kaiser, Benedikt; Glöckner, Carina; Hellmich, Julia; Schafer, Donald W.; Echols, Nathaniel; Gildea, Richard J.; Grosse-Kunstleve, Ralf W.; Sellberg, Jonas; McQueen, Trevor A.; Fry, Alan R.; Messerschmidt, Marc M.; Miahnahri, Alan; Seibert, M. Marvin; Hampton, Christina Y.; Starodub, Dmitri; Loh, N. Duane; Sokaras, Dimosthenis; Weng, Tsu-Chien; Zwart, Petrus H.; Glatzel, Pieter; Milathianaki, Despina; White, William E.; Adams, Paul D.; Williams, Garth J.; Boutet, Sébastien; Zouni, Athina; Messinger, Johannes; Sauter, Nicholas K.; Bergmann, Uwe; Yano, Junko; Yachandra, Vittal K.; Bogan, Michael J.

    2012-11-01

    A low flow rate liquid microjet method for delivery of hydrated protein crystals to X-ray lasers is presented. Linac Coherent Light Source data demonstrates serial femtosecond protein crystallography with micrograms, a reduction of sample consumption by orders of magnitude. An electrospun liquid microjet has been developed that delivers protein microcrystal suspensions at flow rates of 0.14–3.1 µl min{sup −1} to perform serial femtosecond crystallography (SFX) studies with X-ray lasers. Thermolysin microcrystals flowed at 0.17 µl min{sup −1} and diffracted to beyond 4 Å resolution, producing 14 000 indexable diffraction patterns, or four per second, from 140 µg of protein. Nanoflow electrospinning extends SFX to biological samples that necessitate minimal sample consumption.

  14. Serial murder by healthcare professionals.

    PubMed

    Yorker, Beatrice Crofts; Kizer, Kenneth W; Lampe, Paula; Forrest, A R W; Lannan, Jacquetta M; Russell, Donna A

    2006-11-01

    The prosecution of Charles Cullen, a nurse who killed at least 40 patients over a 16-year period, highlights the need to better understand the phenomenon of serial murder by healthcare professionals. The authors conducted a LexisNexis search which yielded 90 criminal prosecutions of healthcare providers that met inclusion criteria for serial murder of patients. In addition we reviewed epidemiologic studies, toxicology evidence, and court transcripts, to provide data on healthcare professionals who have been prosecuted between 1970 and 2006. Fifty-four of the 90 have been convicted; 45 for serial murder, four for attempted murder, and five pled guilty to lesser charges. Twenty-four more have been indicted and are either awaiting trial or the outcome has not been published. The other 12 prosecutions had a variety of legal outcomes. Injection was the main method used by healthcare killers followed by suffocation, poisoning, and tampering with equipment. Prosecutions were reported from 20 countries with 40% taking place in the United States. Nursing personnel comprised 86% of the healthcare providers prosecuted; physicians 12%, and 2% were allied health professionals. The number of patient deaths that resulted in a murder conviction is 317 and the number of suspicious patient deaths attributed to the 54 convicted caregivers is 2113. These numbers are disturbing and demand that systemic changes in tracking adverse patient incidents associated with presence of a specific healthcare provider be implemented. Hiring practices must shift away from preventing wrongful discharge or denial of employment lawsuits to protecting patients from employees who kill.

  15. Serial murder by healthcare professionals.

    PubMed

    Yorker, Beatrice Crofts; Kizer, Kenneth W; Lampe, Paula; Forrest, A R W; Lannan, Jacquetta M; Russell, Donna A

    2008-01-01

    The prosecution of Charles Cullen, a nurse who killed at least 40 patients over a 16-year period, highlights the need to better understand the phenomenon of serial murder by healthcare professionals. The authors conducted a LexisNexis search which yielded 90 criminal prosecutions of healthcare providers that met inclusion criteria for serial murder of patients. In addition we reviewed epidemiologic studies, toxicology evidence, and court transcripts, to provide data on healthcare professionals who have been prosecuted between 1970 and 2006. Fifty-four of the 90 have been convicted; 45 for serial murder, four for attempted murder, and five pled guilty to lesser charges. Twenty-four more have been indicted and are either awaiting trial or the outcome has not been published. The other 12 prosecutions had a variety of legal outcomes. Injection was the main method used by healthcare killers followed by suffocation, poisoning, and tampering with equipment. Prosecutions were reported from 20 countries with 40% taking place in the United States. Nursing personnel comprised 86% of the healthcare providers prosecuted; physicians 12%, and 2% were allied health professionals. The number of patient deaths that resulted in a murder conviction is 317 and the number of suspicious patient deaths attributed to the 54 convicted caregivers is 2113. These numbers are disturbing and demand that systemic changes in tracking adverse patient incidents associated with presence of a specific healthcare provider be implemented. Hiring practices must shift away from preventing wrongful discharge or denial of employment lawsuits to protecting patients from employees who kill.

  16. Stress in dilute suspensions

    NASA Technical Reports Server (NTRS)

    Passman, Stephen L.

    1989-01-01

    Generally, two types of theory are used to describe the field equations for suspensions. The so-called postulated equations are based on the kinetic theory of mixtures, which logically should give reasonable equations for solutions. The basis for the use of such theory for suspensions is tenuous, though it at least gives a logical path for mathematical arguments. It has the disadvantage that it leads to a system of equations which is underdetermined, in a sense that can be made precise. On the other hand, the so-called averaging theory starts with a determined system, but the very process of averaging renders the resulting system underdetermined. A third type of theory is proposed in which the kinetic theory of gases is used to motivate continuum equations for the suspended particles. This entails an interpretation of the stress in the particles that is different from the usual one. Classical theory is used to describe the motion of the suspending medium. The result is a determined system for a dilute suspension. Extension of the theory to more concentrated systems is discussed.

  17. Serial murder by healthcare professionals.

    PubMed

    Yorker, Beatrice Crofts; Kizer, Kenneth W; Lampe, Paula; Forrest, A R W; Lannan, Jacquetta M; Russell, Donna A

    2006-11-01

    The prosecution of Charles Cullen, a nurse who killed at least 40 patients over a 16-year period, highlights the need to better understand the phenomenon of serial murder by healthcare professionals. The authors conducted a LexisNexis search which yielded 90 criminal prosecutions of healthcare providers that met inclusion criteria for serial murder of patients. In addition we reviewed epidemiologic studies, toxicology evidence, and court transcripts, to provide data on healthcare professionals who have been prosecuted between 1970 and 2006. Fifty-four of the 90 have been convicted; 45 for serial murder, four for attempted murder, and five pled guilty to lesser charges. Twenty-four more have been indicted and are either awaiting trial or the outcome has not been published. The other 12 prosecutions had a variety of legal outcomes. Injection was the main method used by healthcare killers followed by suffocation, poisoning, and tampering with equipment. Prosecutions were reported from 20 countries with 40% taking place in the United States. Nursing personnel comprised 86% of the healthcare providers prosecuted; physicians 12%, and 2% were allied health professionals. The number of patient deaths that resulted in a murder conviction is 317 and the number of suspicious patient deaths attributed to the 54 convicted caregivers is 2113. These numbers are disturbing and demand that systemic changes in tracking adverse patient incidents associated with presence of a specific healthcare provider be implemented. Hiring practices must shift away from preventing wrongful discharge or denial of employment lawsuits to protecting patients from employees who kill. PMID:17199622

  18. The sexually sadistic serial killer.

    PubMed

    Warren, J I; Hazelwood, R R; Dietz, P E

    1996-11-01

    This article explores characteristics and crime scene behavior of 20 sexually sadistic serial murderers. The pairing of character pathology with paraphilic arousal to the control and degradation of others is examined as it manifests itself in their murders. Commonalities across murders and across murderers are highlighted, i.e., the execution of murders that are well-planned, the use of preselected locations, captivity, a variety of painful sexual acts, sexual bondage, intentional torture, and death by means of strangulation and stabbing. PMID:8914287

  19. Serial analysis of gene expression.

    PubMed

    Velculescu, V E; Zhang, L; Vogelstein, B; Kinzler, K W

    1995-10-20

    The characteristics of an organism are determined by the genes expressed within it. A method was developed, called serial analysis of gene expression (SAGE), that allows the quantitative and simultaneous analysis of a large number of transcripts. To demonstrate this strategy, short diagnostic sequence tags were isolated from pancreas, concatenated, and cloned. Manual sequencing of 1000 tags revealed a gene expression pattern characteristic of pancreatic function. New pancreatic transcripts corresponding to novel tags were identified. SAGE should provide a broadly applicable means for the quantitative cataloging and comparison of expressed genes in a variety of normal, developmental, and disease states. PMID:7570003

  20. Application specific serial arithmetic arrays

    NASA Technical Reports Server (NTRS)

    Winters, K.; Mathews, D.; Thompson, T.

    1990-01-01

    High performance systolic arrays of serial-parallel multiplier elements may be rapidly constructed for specific applications by applying hardware description language techniques to a library of full-custom CMOS building blocks. Single clock pre-charged circuits have been implemented for these arrays at clock rates in excess of 100 Mhz using economical 2-micron (minimum feature size) CMOS processes, which may be quickly configured for a variety of applications. A number of application-specific arrays are presented, including a 2-D convolver for image processing, an integer polynomial solver, and a finite-field polynomial solver.

  1. Reconciling rising serials costs, the serials budget, and reference needs in a medical library serials retrenchment program: a methodology.

    PubMed

    Spang, L

    1995-01-01

    Devising a coherent serials retrenchment plan while maintaining quality reference service is a dilemma faced by increasing numbers of medical librarians. In 1991, the staff of the Shiffman Medical Library, Wayne State University, began to address increasing serials budget reductions that by 1994 amounted to a projected 20% maximum cut. The resulting retrenchment plan combined an ongoing serials use study, faculty and librarian reviews of cancellation lists, and systematic refinements in interlibrary cooperation and document delivery service. The Shiffman plan provides a constructive framework that can be adapted to other medical libraries facing immediate, major serials retrenchment.

  2. The Relationship Context of Premarital Serial Cohabitation.

    PubMed

    Cohen, Jessica; Manning, Wendy

    2010-09-01

    Even though serial cohabitation is on the rise, it has not been integrated into recent family research. We analyze the National Survey of Family Growth (NSFG) cycle 6 to explore the relationship context of serial cohabitation for women throughout emerging adulthood (N=3,397). We provide a relationship context for serial cohabitation by examining the age at first cohabitation, duration of cohabiting unions, marital expectations and transitions, as well as premarital sexual histories. Furthermore, we examine the change in these relationship indicators across women's birth cohorts. We find that serial cohabitors' co-residential unions are about the same duration as single-instance cohabiting unions. Serial cohabitors start cohabiting younger, report lower marital expectations than single-instance cohabitors and a smaller proportion marry before age 30. Women who have more premarital sex partners have significantly greater odds of serial cohabiting. These findings indicate that women face increasingly complex relationship trajectories during emerging adulthood.

  3. Evolution of human serial pairbonding.

    PubMed

    Fisher, H E

    1989-03-01

    Data on divorce taken for all available years between 1947 and 1981 from the Demographic Yearbooks of the United Nations on 58 peoples illustrate that divorce has a consistent pattern. Divorces exhibit a skewed distribution, characterized by the occurrence of the mode early in marriage (with a divorce peak on or around the fourth year) and a gradual, long-tailed decline following this peak. Divorce risk peaks in age category 25-29 for males and age categories 20-24 and 25-29 for females, the height of reproductive and parenting years, and divorce counts peak among couples with two or fewer children. These properties of divorce are unrelated to divorce rate; they occur in societies with both high and low divorce rates. Data on available horticultural and gathering/hunting societies illustrate that divorce also peaks among young couples early in marriage. Remarriage by divorced and widowed individuals of reproductive age is also common cross-culturally. It is proposed that the above four-year modal marriage duration among couples of reproductive age who divorce reflects a hominid reproductive strategy that probably evolved some time after the appearance of Homo in response to increased female "reproductive burden" and functioned to ensure the survival of the hominid infant through weaning. Serial pairbonding during the female's reproductive years had ancestral adaptive advantages, producing the modern cross-cultural pattern of serial pairbonding. PMID:2929738

  4. Dilution refrigeration for space applications

    NASA Technical Reports Server (NTRS)

    Israelsson, U. E.; Petrac, D.

    1990-01-01

    Dilution refrigerators are presently used routinely in ground based applications where temperatures below 0.3 K are required. The operation of a conventional dilution refrigerator depends critically on the presence of gravity. To operate a dilution refrigerator in space many technical difficulties must be overcome. Some of the anticipated difficulties are identified in this paper and possible solutions are described. A single cycle refrigerator is described conceptually that uses forces other than gravity to function and the stringent constraints imposed on the design by requiring the refrigerator to function on the earth without using gravity are elaborated upon.

  5. Serial turbo trellis coded modulation using a serially concatenated coder

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush (Inventor); Dolinar, Samuel J. (Inventor); Pollara, Fabrizio (Inventor)

    2011-01-01

    Serial concatenated trellis coded modulation (SCTCM) includes an outer coder, an interleaver, a recursive inner coder and a mapping element. The outer coder receives data to be coded and produces outer coded data. The interleaver permutes the outer coded data to produce interleaved data. The recursive inner coder codes the interleaved data to produce inner coded data. The mapping element maps the inner coded data to a symbol. The recursive inner coder has a structure which facilitates iterative decoding of the symbols at a decoder system. The recursive inner coder and the mapping element are selected to maximize the effective free Euclidean distance of a trellis coded modulator formed from the recursive inner coder and the mapping element. The decoder system includes a demodulation unit, an inner SISO (soft-input soft-output) decoder, a deinterleaver, an outer SISO decoder, and an interleaver.

  6. A Dilute-and-Shoot LC-MS Method for Quantitating Opioids in Oral Fluid.

    PubMed

    Enders, Jeffrey R; McIntire, Gregory L

    2015-10-01

    Opioid testing represents a dominant share of the market in pain management clinical testing facilities. Testing of this drug class in oral fluid (OF) has begun to rise in popularity. OF analysis has traditionally required extensive clean-up protocols and sample concentration, which can be avoided. This work highlights the use of a fast, 'dilute-and-shoot' method that performs no considerable sample manipulation. A quantitative method for the determination of eight common opioids and associated metabolites (codeine, morphine, hydrocodone, hydromorphone, norhydrocodone, oxycodone, noroxycodone and oxymorphone) in OF is described herein. OF sample is diluted 10-fold in methanol/water and then analyzed using an Agilent chromatographic stack coupled with an AB SCIEX 4500. The method has a 2.2-min LC gradient and a cycle time of 2.9 min. In contrast to most published methods of this particular type, this method uses no sample clean-up or concentration and has a considerably faster LC gradient, making it ideal for very high-throughput laboratories. Importantly, the method requires only 100 μL of sample and is diluted 10-fold prior to injection to help with instrument viability. Baseline separation of all isobaric opioids listed above was achieved on a phenyl-hexyl column. The validated calibration range for this method is 2.5-1,000 ng/mL. This 'dilute-and-shoot' method removes the unnecessary, costly and time-consuming extraction steps found in traditional methods and still surpasses all analytical requirements. PMID:26378142

  7. Intermittency in dilute granular flows

    NASA Astrophysics Data System (ADS)

    Guo, Wenxuan; Zhang, Qiang; Wylie, Jonathan J.

    2016-07-01

    In this letter, we show that dilute granular systems can exhibit a type of intermittency that has no analogue in gas dynamics. We consider a simple system in which a very dilute set of granular particles falls under gravity through a nozzle. This setting is analogous to the classical problem of high-speed nozzle flow in the study of compressible gases. It is well known that very dilute granular systems exhibit behavior qualitatively similar to gases, and that gas flowing through a nozzle does not exhibit intermittency. Nevertheless, we show that the intermittency in dilute granular nozzle flows can occur and corresponds to complicated transitions between supersonic and subsonic regimes. We also provide detailed explanations of the mechanism underlying this phenomenon.

  8. Cluster approach to dilute magnetism

    NASA Astrophysics Data System (ADS)

    Holvorcem, Paulo R. C.; Osório, Roberto

    1988-10-01

    A cluster algebra is developed for the definition of independent correlation functions in the cluster-variation method (CVM) for the spin-1 Ising model. A scheme is then introduced for the study of site-dilute spin- {1}/{2} Ising models by means of the CVM. The procedure regards the site-dilute spin- {1}/{2} model as the spin-1 model with additional constraints due to dilution. The Desjardins-Steinsvoll algortihm is used for the transformation of the CVM equations into a set of differential equations for the independent correlation functions with the inverse temperature as parameter. The evolution of the correlation functions with temperature and the behavior of response functions such as the specific heat and the susceptability are then obtained for any degree of dilution. As an introduction to this scheme, its detailed application is presented here for the simple case of the pair approximation.

  9. Scientific and Technical Serials Holdings Optimization in an Inefficient Market: A LSU Serials Redesign Project Exercise.

    ERIC Educational Resources Information Center

    Bensman, Stephen J.; Wilder, Stanley J.

    1998-01-01

    Analyzes the structure of the library market for scientific and technical (ST) serials. Describes an exercise aimed at a theoretical reconstruction of the ST-serials holdings of Louisiana State University (LSU) Libraries. Discusses the set definitions, measures, and algorithms necessary in the design of a computer program to appraise ST serials.…

  10. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... dilution system, you may use a laminar flow element, an ultrasonic flow meter, a subsonic venturi, a... § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow meter to determine instantaneous diluted exhaust flow rates or total diluted exhaust flow over a...

  11. DAVINCI: Dilute Aperture VIsible Nulling Coronagraphic Imager

    NASA Technical Reports Server (NTRS)

    Shao, Michael; Levine, B. M.; Vasisht, G.; Lane, B. F.; Woodruff, R.; Vasudevan, G.; Samuele, R.; Lloyd, C. A.; Clampin, M.; Lyon, R.; Guyon, O.

    2008-01-01

    This slide presentation gives an overview of DAVINCI (Dilute Aperture VIsible Nulling Coronagraphic Imager). The presentation also includes information about dilute aperture coronagraph, and lyot efficiency.

  12. Precise quantitation of antinuclear antibodies on HEp-2 cells without the need for serial dilution.

    PubMed

    Hollingsworth, P N; Dawkins, R I; Peter, J B

    1996-07-01

    Using HEp-2 cells as a substrate, we developed a method to quantitate antinuclear antibodies (ANA) by comparing the green fluorescence intensity of unknown samples with that of calibrated standards. Intensity was then converted to international units per milliliter by reference to a standard curve. This method is accurate and precise around the cutoff for positively (5 to 10 IU/ml) and therefore provides a reliable screening test for active, untreated systemic lupus erythematosus. Furthermore, the method can identify sera likely to contain autoantibodies commonly detected in ANA-positive sera (SS-A, SS-B, Sm, small nuclear ribonucleoprotein, Scl-70, and double-stranded DNA).

  13. Serial Order: A Parallel Distributed Processing Approach.

    ERIC Educational Resources Information Center

    Jordan, Michael I.

    Human behavior shows a variety of serially ordered action sequences. This paper presents a theory of serial order which describes how sequences of actions might be learned and performed. In this theory, parallel interactions across time (coarticulation) and parallel interactions across space (dual-task interference) are viewed as two aspects of a…

  14. The Serial Murderer's Motivations: An Interdisciplinary Review.

    ERIC Educational Resources Information Center

    DeHart, Dana D.; Mahoney, John M.

    1994-01-01

    Defines serial killer as individual who murders two or more victims over an extended period of time, ranging from days to years, with the crimes often being sexually motivated. Reviews existing motivational theories of serial murder and proposes additional explications from range of disciplines. Presents suggestions for future research and…

  15. Modus operandi of female serial killers.

    PubMed

    Wilson, W; Hilton, T

    1998-04-01

    The modus operandi of female serial killers was examined from a chronology of 58 cases in America and 47 cases in 17 other countries, compiled over 25-year intervals. Female serial killers in other countries accounted for a disproportionately greater number of victims, but those in America managed a longer killing career when associated with a low profile modus operandi.

  16. Serials standards work: the next frontier.

    PubMed

    Tseng, S C; Arcand, J L; Brugger, J M; Finn, M; Olson, A J; Somers, S

    1990-04-01

    Serials, one of the more complicated areas of library technical endeavors, has lacked the benefit of standards for a long time. Even now, with standards beginning to be available, the majority of institutions are not working within standard serials formats. A survey to determine the use of serials standards in libraries was conducted in 1988 by the American Library Association, Resources and Technical Services Division, Serials Section, Committee to Study Serials Standards. In the spring of 1988 a survey was sent to a group encompassing the Association of Research Libraries members, CONSER participants, United States Newspaper Program participants, Microform Project libraries, and some vendors and librarians who attended the Committee meetings on a regular basis. The survey questionnaire assessed the current level of serials standards awareness of librarians and vendors. Topics included the type of serials systems used, standards relevant to serials control and union listing and whether or not they are implemented, types and levels of training staff received in the application of standards, benefits of the standards, and areas where standards are most needed. PMID:10104416

  17. [Guided tooth eruption via serial extraction].

    PubMed

    Luyten, C

    1995-01-01

    Crowding of teeth is the result of arch length discrepancy (ALD). Minimal crowding can be solved with slice-technique, more severe crowding (ALD > or = 5 mm) can be intercepted with a serial extraction procedure. In this paper a sequence of serial extraction will be explained and illustrated with case reports.

  18. Modus operandi of female serial killers.

    PubMed

    Wilson, W; Hilton, T

    1998-04-01

    The modus operandi of female serial killers was examined from a chronology of 58 cases in America and 47 cases in 17 other countries, compiled over 25-year intervals. Female serial killers in other countries accounted for a disproportionately greater number of victims, but those in America managed a longer killing career when associated with a low profile modus operandi. PMID:9621726

  19. 47 CFR 95.671 - Serial number.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis....

  20. 47 CFR 95.671 - Serial number.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis....

  1. Serial Cohabitation and the Marital Life Course

    ERIC Educational Resources Information Center

    Lichter, Daniel T.; Qian, Zhenchao

    2008-01-01

    Using cohort data from the National Longitudinal Survey of Youth, this paper tracks the experiences of "serial cohabitors." Results indicate that only a minority of cohabiting women (about 15%-20%) were involved in multiple cohabitations. Serial cohabitations were overrepresented among economically disadvantaged groups, especially those with low…

  2. Serial Position Functions in General Knowledge

    ERIC Educational Resources Information Center

    Kelley, Matthew R.; Neath, Ian; Surprenant, Aimée M.

    2015-01-01

    Serial position functions with marked primacy and recency effects are ubiquitous in episodic memory tasks. The demonstrations reported here explored whether bow-shaped serial position functions would be observed when people ordered exemplars from various categories along a specified dimension. The categories and dimensions were: actors and age;…

  3. Serial killers with military experience: applying learning theory to serial murder.

    PubMed

    Castle, Tammy; Hensley, Christopher

    2002-08-01

    Scholars have endeavored to study the motivation and causality behind serial murder by researching biological, psychological, and sociological variables. Some of these studies have provided support for the relationship between these variables and serial murder. However, the study of serial murder continues to be an exploratory rather than explanatory research topic. This article examines the possible link between serial killers and military service. Citing previous research using social learning theory for the study of murder, this article explores how potential serial killers learn to reinforce violence, aggression, and murder in military boot camps. As with other variables considered in serial killer research, military experience alone cannot account for all cases of serial murder. Future research should continue to examine this possible link.

  4. Serial killers with military experience: applying learning theory to serial murder.

    PubMed

    Castle, Tammy; Hensley, Christopher

    2002-08-01

    Scholars have endeavored to study the motivation and causality behind serial murder by researching biological, psychological, and sociological variables. Some of these studies have provided support for the relationship between these variables and serial murder. However, the study of serial murder continues to be an exploratory rather than explanatory research topic. This article examines the possible link between serial killers and military service. Citing previous research using social learning theory for the study of murder, this article explores how potential serial killers learn to reinforce violence, aggression, and murder in military boot camps. As with other variables considered in serial killer research, military experience alone cannot account for all cases of serial murder. Future research should continue to examine this possible link. PMID:12150084

  5. Bicosomes: Bicelles in Dilute Systems

    PubMed Central

    Rodríguez, Gelen; Soria, Guadalupe; Coll, Elisenda; Rubio, Laia; Barbosa-Barros, Lucyanna; López-Iglesias, Carmen; Planas, Anna M.; Estelrich, Joan; de la Maza, Alfons; López, Olga

    2010-01-01

    Abstract Bicelles are discoidal phospholipid nanostructures at high lipid concentrations. Under dilute conditions, bicelles become larger and adopt a variety of morphologies. This work proposes a strategy to preserve the discoidal morphology of bicelles in environments with high water content. Bicelles were formed in concentrated conditions and subsequently encapsulated in liposomes. Later dilution of these new structures, called bicosomes, demonstrated that lipid vesicles were able to isolate and protect bicelles entrapped inside them from the medium. Characterization of systems before and after dilution by dynamic light-scattering spectroscopy and cryo-transmission electron microscopy showed that free bicelles changed in size and morphology, whereas encapsulated bicelles remained unaltered by the effect of dilution. Free and entrapped bicelles (containing the paramagnetic contrast agent gadodiamide) were injected into rat brain lateral ventricles. Coronal and sagittal visualization was performed by magnetic resonance imaging. Whereas rats injected with free bicelles did not survive the surgery, those injected with bicosomes did, and a hyperintensity effect due to gadodiamide was observed in the cerebrospinal fluid. These results indicate that bicosomes are a good means of preserving the morphology of bicelles under dilution conditions. PMID:20643066

  6. The effect of dilution and the use of a post-extraction nucleic acid purification column on the accuracy, precision, and inhibition of environmental DNA samples

    USGS Publications Warehouse

    Mckee, Anna M.; Spear, Stephen F.; Pierson, Todd W.

    2015-01-01

    Isolation of environmental DNA (eDNA) is an increasingly common method for detecting presence and assessing relative abundance of rare or elusive species in aquatic systems via the isolation of DNA from environmental samples and the amplification of species-specific sequences using quantitative PCR (qPCR). Co-extracted substances that inhibit qPCR can lead to inaccurate results and subsequent misinterpretation about a species’ status in the tested system. We tested three treatments (5-fold and 10-fold dilutions, and spin-column purification) for reducing qPCR inhibition from 21 partially and fully inhibited eDNA samples collected from coastal plain wetlands and mountain headwater streams in the southeastern USA. All treatments reduced the concentration of DNA in the samples. However, column purified samples retained the greatest sensitivity. For stream samples, all three treatments effectively reduced qPCR inhibition. However, for wetland samples, the 5-fold dilution was less effective than other treatments. Quantitative PCR results for column purified samples were more precise than the 5-fold and 10-fold dilutions by 2.2× and 3.7×, respectively. Column purified samples consistently underestimated qPCR-based DNA concentrations by approximately 25%, whereas the directional bias in qPCR-based DNA concentration estimates differed between stream and wetland samples for both dilution treatments. While the directional bias of qPCR-based DNA concentration estimates differed among treatments and locations, the magnitude of inaccuracy did not. Our results suggest that 10-fold dilution and column purification effectively reduce qPCR inhibition in mountain headwater stream and coastal plain wetland eDNA samples, and if applied to all samples in a study, column purification may provide the most accurate relative qPCR-based DNA concentrations estimates while retaining the greatest assay sensitivity.

  7. Serial position encoding of signs.

    PubMed

    Miozzo, Michele; Petrova, Anna; Fischer-Baum, Simon; Peressotti, Francesca

    2016-09-01

    Reduced short-term memory (STM) capacity has been reported for sign as compared to speech when items have to be recalled in a specific order. This difference has been attributed to a more precise and efficient serial position encoding in verbal STM (used for speech) than visuo-spatial STM (used for sign). We tested in the present investigation whether the reduced STM capacity with signs stems from a lack of positional encoding available in verbal STM. Error analyses reported in prior studies have revealed that positions are defined in verbal STM by distance from both the start and the end of the sequence (both-edges positional encoding scheme). Our analyses of the errors made by deaf participants with finger-spelled letters revealed that the both-edges positional encoding scheme underlies the STM representation of signs. These results indicate that the cause of the STM disadvantage is not the type of positional encoding but rather the difficulties in binding an item in visuo-spatial STM to its specific position in the sequence. Both-edges positional encoding scheme could be specific of sign, since it has not been found in visuo-spatial STM tasks conducted with hearing participants. PMID:27244095

  8. Revisiting the Dilution Procedure Used To Manipulate Microbial Biodiversity in Terrestrial Systems

    PubMed Central

    Yan, Yan; Kuramae, Eiko E.; Klinkhamer, Peter G. L.

    2015-01-01

    It is hard to assess experimentally the importance of microbial diversity in soil for the functioning of terrestrial ecosystems. An approach that is often used to make such assessment is the so-called dilution method. This method is based on the assumption that the biodiversity of the microbial community is reduced after dilution of a soil suspension and that the reduced diversity persists after incubation of more or less diluted inocula in soil. However, little is known about how the communities develop in soil after inoculation. In this study, serial dilutions of a soil suspension were made and reinoculated into the original soil previously sterilized by gamma irradiation. We determined the structure of the microbial communities in the suspensions and in the inoculated soils using 454-pyrosequencing of 16S rRNA genes. Upon dilution, several diversity indices showed that, indeed, the diversity of the bacterial communities in the suspensions decreased dramatically, with Proteobacteria as the dominant phylum of bacteria detected in all dilutions. The structure of the microbial community was changed considerably in soil, with Proteobacteria, Bacteroidetes, and Verrucomicrobia as the dominant groups in most diluted samples, indicating the importance of soil-related mechanisms operating in the assembly of the communities. We found unique operational taxonomic units (OTUs) even in the highest dilution in both the suspensions and the incubated soil samples. We conclude that the dilution approach reduces the diversity of microbial communities in soil samples but that it does not allow accurate predictions of the community assemblage during incubation of (diluted) suspensions in soil. PMID:25888175

  9. Revisiting the dilution procedure used to manipulate microbial biodiversity in terrestrial systems.

    PubMed

    Yan, Yan; Kuramae, Eiko E; Klinkhamer, Peter G L; van Veen, Johannes A

    2015-07-01

    It is hard to assess experimentally the importance of microbial diversity in soil for the functioning of terrestrial ecosystems. An approach that is often used to make such assessment is the so-called dilution method. This method is based on the assumption that the biodiversity of the microbial community is reduced after dilution of a soil suspension and that the reduced diversity persists after incubation of more or less diluted inocula in soil. However, little is known about how the communities develop in soil after inoculation. In this study, serial dilutions of a soil suspension were made and reinoculated into the original soil previously sterilized by gamma irradiation. We determined the structure of the microbial communities in the suspensions and in the inoculated soils using 454-pyrosequencing of 16S rRNA genes. Upon dilution, several diversity indices showed that, indeed, the diversity of the bacterial communities in the suspensions decreased dramatically, with Proteobacteria as the dominant phylum of bacteria detected in all dilutions. The structure of the microbial community was changed considerably in soil, with Proteobacteria, Bacteroidetes, and Verrucomicrobia as the dominant groups in most diluted samples, indicating the importance of soil-related mechanisms operating in the assembly of the communities. We found unique operational taxonomic units (OTUs) even in the highest dilution in both the suspensions and the incubated soil samples. We conclude that the dilution approach reduces the diversity of microbial communities in soil samples but that it does not allow accurate predictions of the community assemblage during incubation of (diluted) suspensions in soil.

  10. Background instrumental music and serial recall.

    PubMed

    Nittono, H

    1997-06-01

    Although speech and vocal music are consistently shown to impair serial recall for visually presented items, instrumental music does not always produce a significant disruption. This study investigated the features of instrumental music that would modulate the disruption in serial recall. 24 students were presented sequences of nine digits and required to recall the digits in order of presentation. Instrumental music as played either forward or backward during the task. Forward music caused significantly more disruption than did silence, whereas the reversed music did not. Some higher-order factor may be at work in the effect of background music on serial recall.

  11. Serials Librarianship, 1981-85: A Review Article.

    ERIC Educational Resources Information Center

    Clack, Mary Elizabeth

    1986-01-01

    Reviews nine significant publications in serials librarianship published from 1981 through 1985. Topics covered include publishing and electronic publishing, cataloging, acquisitions, and serials automation. (Author/EM)

  12. Dilution and the elusive baseline.

    PubMed

    Likens, Gene E; Buso, Donald C

    2012-04-17

    Knowledge of baseline conditions is critical for evaluating quantitatively the effect of human activities on environmental conditions, such as the impact of acid deposition. Efforts to restore ecosystems to prior, "pristine" condition require restoration targets, often based on some presumed or unknown baseline condition. Here, we show that rapid and relentless dilution of surface water chemistry is occurring in the White Mountains of New Hampshire, following decades of acid deposition. Extrapolating measured linear trends using a unique data set of up to 47 years, suggest that both precipitation and streamwater chemistry (r(2) >0.84 since 1985) in the Hubbard Brook Experimental Forest (HBEF) will approximate demineralized water within one to three decades. Because such dilute chemistry is unrealistic for surface waters, theoretical baseline compositions have been calculated for precipitation and streamwater: electrical conductivity of 3 and 5 μS/cm, base cation concentrations of 7 and 39 μeq/liter, acid-neutralizing capacity values of <1 and 14 μeq/liter, respectively; and pH 5.5 for both. Significantly large and rapid dilution of surface waters to values even more dilute than proposed for Pre-Industrial Revolution (PIR) conditions has important ecological, biogeochemical and water resource management implications, such as for the success of early reproductive stages of aquatic organisms.

  13. Dilution and the elusive baseline.

    PubMed

    Likens, Gene E; Buso, Donald C

    2012-04-17

    Knowledge of baseline conditions is critical for evaluating quantitatively the effect of human activities on environmental conditions, such as the impact of acid deposition. Efforts to restore ecosystems to prior, "pristine" condition require restoration targets, often based on some presumed or unknown baseline condition. Here, we show that rapid and relentless dilution of surface water chemistry is occurring in the White Mountains of New Hampshire, following decades of acid deposition. Extrapolating measured linear trends using a unique data set of up to 47 years, suggest that both precipitation and streamwater chemistry (r(2) >0.84 since 1985) in the Hubbard Brook Experimental Forest (HBEF) will approximate demineralized water within one to three decades. Because such dilute chemistry is unrealistic for surface waters, theoretical baseline compositions have been calculated for precipitation and streamwater: electrical conductivity of 3 and 5 μS/cm, base cation concentrations of 7 and 39 μeq/liter, acid-neutralizing capacity values of <1 and 14 μeq/liter, respectively; and pH 5.5 for both. Significantly large and rapid dilution of surface waters to values even more dilute than proposed for Pre-Industrial Revolution (PIR) conditions has important ecological, biogeochemical and water resource management implications, such as for the success of early reproductive stages of aquatic organisms. PMID:22455659

  14. Serial order in spatial immediate memory.

    PubMed

    Smyth, M M; Scholey, K A

    1996-02-01

    Serial order effects in spatial memory are investigated in three experiments. In the first an analysis of errors in recall data suggested that immediate transpositions were the most common error and that order errors over 2 or 3 adjacent items accounted for the majority of errors in recall. The first and last serial positions are less error-prone than is the middle position in sets of six and seven items. A second experiment investigated recognition of transpositions and found that immediate transpositions were hardest to recognize but that a traditional serial position effect was not found. This may be due to the difficulty of maintaining one set of spatial items when another set is presented for comparison. A probe experiment, in which subjects were asked to recognize whether a single item came from a memory set and then to assign it to its position in the set indicated that the first and last positions were remembered more accurately than were central positions. The combination of serial order data in recall and position data suggests that there are similarities between serial order and position effects in the verbal and spatial domains and that serial order in spatial sequences is position-based.

  15. Serial position functions in general knowledge.

    PubMed

    Kelley, Matthew R; Neath, Ian; Surprenant, Aimée M

    2015-11-01

    Serial position functions with marked primacy and recency effects are ubiquitous in episodic memory tasks. The demonstrations reported here explored whether bow-shaped serial position functions would be observed when people ordered exemplars from various categories along a specified dimension. The categories and dimensions were: actors and age; animals and weight; basketball players and height; countries and area; and planets and diameter. In all cases, a serial position function was observed: People were more accurate to order the youngest and oldest actors, the lightest and heaviest animals, the shortest and tallest basketball players, the smallest and largest countries, and the smallest and largest planets, relative to intermediate items. The results support an explanation of serial position functions based on relative distinctiveness, which predicts that serial position functions will be observed whenever a set of items can be sensibly ordered along a particular dimension. The serial position function arises because the first and last items enjoy a benefit of having no competitors on 1 side and therefore have enhanced distinctiveness relative to mid-dimension items, which suffer by having many competitors on both sides.

  16. Analyzing Current Serials in Virginia: An Application of the Ulrich's Serials Analysis System

    ERIC Educational Resources Information Center

    Metz, Paul; Gasser, Sharon

    2006-01-01

    VIVA (the Virtual Library of Virginia) was one of the first subscribers to R. R. Bowker's Ulrich's Serials Analysis System (USAS). Creating a database that combined a union report of current serial subscriptions within most academic libraries in the state with the data elements present in Ulrich's made possible a comprehensive analysis designed…

  17. [The serial murder: a few theoretical perspectives].

    PubMed

    Leistedt, S; Linkowski, P

    2011-01-01

    Despite numbers of publications and effort to try to establish the definition, the classification, the epidemiology, the clinical aspects and the psychopathology of serial killers, a universal consensus seems to say the least. Crime, though reduced in some countries, appears to impact more and more consistent worldwide, generating controversial ideas and a multitude of possible explanations. The serial killer usually presents as a caucasian man, aged between 20 and 40 years, often embedded socially and in his family, but with serious psychiatric, personal and especially family history. Usually acting alone, the serial killer plans a crime well in advance, but sometimes within the scope of impulsivity for a minority, the victim not being previously selected. In the latter case, an actual mental illness like psychosis is found. It is clear from numerous psychopathological studies conducted so far that most serial killers are defined as psychopathic sexual sadists, whose childhood was difficult, if not flouted, punctuated by physical and psychological violence situations. In addition, pervasive fantasies combined with thoughts of death, sex and violence are as much in common with the original acts of which they are the instigators. Beyond a relentless media that is constantly watering the public with stories and pictures depicting them as such, serial killers remain an enigma. We can therefore attempt to answer the various questions raised by this phenomenon, the way these people operate and how we can curb the rise, thanks to the neurobiological and neurophysiological approaches that science offers us.

  18. Science Notes: Dilution of a Weak Acid

    ERIC Educational Resources Information Center

    Talbot, Christopher; Wai, Chooi Khee

    2014-01-01

    This "Science note" arose out of practical work involving the dilution of ethanoic acid, the measurement of the pH of the diluted solutions and calculation of the acid dissociation constant, K[subscript a], for each diluted solution. The students expected the calculated values of K[subscript a] to be constant but they found that the…

  19. Stochastic modeling of a serial killer.

    PubMed

    Simkin, M V; Roychowdhury, V P

    2014-08-21

    We analyze the time pattern of the activity of a serial killer, who during 12 years had murdered 53 people. The plot of the cumulative number of murders as a function of time is of "Devil's staircase" type. The distribution of the intervals between murders (step length) follows a power law with the exponent of 1.4. We propose a model according to which the serial killer commits murders when neuronal excitation in his brain exceeds certain threshold. We model this neural activity as a branching process, which in turn is approximated by a random walk. As the distribution of the random walk return times is a power law with the exponent 1.5, the distribution of the inter-murder intervals is thus explained. We illustrate analytical results by numerical simulation. Time pattern activity data from two other serial killers further substantiate our analysis.

  20. Stochastic modeling of a serial killer

    PubMed Central

    Simkin, M.V.; Roychowdhury, V.P.

    2014-01-01

    We analyze the time pattern of the activity of a serial killer, who during twelve years had murdered 53 people. The plot of the cumulative number of murders as a function of time is of “Devil’s staircase” type. The distribution of the intervals between murders (step length) follows a power law with the exponent of 1.4. We propose a model according to which the serial killer commits murders when neuronal excitation in his brain exceeds certain threshold. We model this neural activity as a branching process, which in turn is approximated by a random walk. As the distribution of the random walk return times is a power law with the exponent 1.5, the distribution of the inter-murder intervals is thus explained. We illustrate analytical results by numerical simulation. Time pattern activity data from two other serial killers further substantiate our analysis. PMID:24721476

  1. Modeling the myocardial dilution curve of a pure intravascular indicator.

    PubMed

    Lee, J S; Karch, J; Jayaweera, A R; Lindner, J R; Lee, L P; Skyba, D M; Kaul, S

    1997-10-01

    The dispersion and dilution of contrast medium through the myocardial vasculature is examined first with a serial model comprised of arterial, capillary, and venous components in series to determine their time-concentration curves (TCC) and the myocardial dilution curve (MDC). Analysis of general characteristics shows that the first moment of the MDC, adjusted for that of the aortic TCC and mean transit time (MTT) from the aorta to the first intramyocardial artery, is one-half the MTT of the myocardial vasculature and that the ratio of the area of the MDC and aortic TCC is the fractional myocardial blood volume (MBV). The use of known coronary vascular morphometry and a set of transport functions indicates that the temporal change in MDC is primarily controlled by the MTT. An analysis of several models with heterogeneous flow distributions justifies the procedures to calculate MTT and MBV from the measured MDC. Compared with previously described models, the present model is more general and provides a physical basis for the effects of flow dispersion and heterogeneity on the characteristics of the MDC.

  2. Serial position effects in mild cognitive impairment.

    PubMed

    Howieson, Diane B; Mattek, Nora; Seeyle, Adriana M; Dodge, Hiroko H; Wasserman, Dara; Zitzelberger, Tracy; Jeffrey, Kaye

    2011-03-01

    Mild cognitive impairment (MCI) is often associated with the preclinical phase of Alzheimer's disease (AD). Special scoring of word-list recall data for serial position has been suggested to improve discrimination of normal aging from dementia. We examined serial position effects in word-list recall for MCI participants compared to Alzheimer patients and controls. Individuals with MCI, like Alzheimer patients, had a diminished primacy effect in recalling words from a list. No alternative scoring system was better than standard scoring of word-list recall in distinguishing MCI patients from controls. Retention weighted scoring improved the discrimination of MCI and AD groups.

  3. Serial multiplier arrays for parallel computation

    NASA Technical Reports Server (NTRS)

    Winters, Kel

    1990-01-01

    Arrays of systolic serial-parallel multiplier elements are proposed as an alternative to conventional SIMD mesh serial adder arrays for applications that are multiplication intensive and require few stored operands. The design and operation of a number of multiplier and array configurations featuring locality of connection, modularity, and regularity of structure are discussed. A design methodology combining top-down and bottom-up techniques is described to facilitate development of custom high-performance CMOS multiplier element arrays as well as rapid synthesis of simulation models and semicustom prototype CMOS components. Finally, a differential version of NORA dynamic circuits requiring a single-phase uncomplemented clock signal introduced for this application.

  4. The eyeball killer: serial killings with postmortem globe enucleation.

    PubMed

    Coyle, Julie; Ross, Karen F; Barnard, Jeffrey J; Peacock, Elizabeth; Linch, Charles A; Prahlow, Joseph A

    2015-05-01

    Although serial killings are relatively rare, they can be the cause of a great deal of anxiety while the killer remains at-large. Despite the fact that the motivations for serial killings are typically quite complex, the psychological analysis of a serial killer can provide valuable insight into how and why certain individuals become serial killers. Such knowledge may be instrumental in preventing future serial killings or in solving ongoing cases. In certain serial killings, the various incidents have a variety of similar features. Identification of similarities between separate homicidal incidents is necessary to recognize that a serial killer may be actively killing. In this report, the authors present a group of serial killings involving three prostitutes who were shot to death over a 3-month period. Scene and autopsy findings, including the unusual finding of postmortem enucleation of the eyes, led investigators to recognize the serial nature of the homicides.

  5. The eyeball killer: serial killings with postmortem globe enucleation.

    PubMed

    Coyle, Julie; Ross, Karen F; Barnard, Jeffrey J; Peacock, Elizabeth; Linch, Charles A; Prahlow, Joseph A

    2015-05-01

    Although serial killings are relatively rare, they can be the cause of a great deal of anxiety while the killer remains at-large. Despite the fact that the motivations for serial killings are typically quite complex, the psychological analysis of a serial killer can provide valuable insight into how and why certain individuals become serial killers. Such knowledge may be instrumental in preventing future serial killings or in solving ongoing cases. In certain serial killings, the various incidents have a variety of similar features. Identification of similarities between separate homicidal incidents is necessary to recognize that a serial killer may be actively killing. In this report, the authors present a group of serial killings involving three prostitutes who were shot to death over a 3-month period. Scene and autopsy findings, including the unusual finding of postmortem enucleation of the eyes, led investigators to recognize the serial nature of the homicides. PMID:25682709

  6. Advantages and disadvantages of phonological similarity in serial recall and serial recognition of nonwords.

    PubMed

    Lian, Arild; Karlsen, Paul Johan

    2004-03-01

    The phonological similarity effect (PSE) was studied with lists of nonwords in one task of serial recall and one task of serial recognition. PSE was critically affected by the scoring procedure and the type of phonological similarity involved, and the effect diverged in several ways from the findings of previous studies on words. PSE was absent in serial recall, regardless of scoring procedure, when phonologically similar items that shared the midvowel were compared with phonologically distinct items. PSE was reversed when serial recall and item recall scores of rhyme items and consonant frame items were compared with distinct items, but it was present in the position accuracy score of rhyme lists. In serial recognition, PSE was absent when rhyme lists were compared with distinct lists. Recognition was better for consonant frame lists than for rhyme lists, and there was a marginally significant reversal of PSE when consonant frame lists were compared with distinct lists. In the view of Fallon, Groves, and Tehan's (1999) study and the present study, rhyming improves item recall and serial recall but diminishes position accuracy, regardless of lexicality. But consonant frame lists with differing midvowels have higher item recall, serial recall, and position accuracy scores than do rhyme lists.

  7. Dilute Acid and Autohydrolysis Pretreatment

    NASA Astrophysics Data System (ADS)

    Yang, Bin; Wyman, Charles E.

    Exposure of cellulosic biomass to temperatures of about 120-210°C can remove most of the hemicellulose and produce cellulose-rich solids from which high glucose yields are possible with cellulase enzymes. Furthermore, the use of dilute sulfuric acid in this pretreatment operation can increase recovery of hemicellulose sugars substantially to about 85-95% of the maximum possible versus only about 65% if no acid is employed. The use of small-diameter tubes makes it possible to employ high solids concentrations similar to those preferred for commercial operations, with rapid heat-up, good temperature control, and accurate closure of material balances. Mixed reactors can be employed to pretreat larger amounts of biomass than possible in such small-diameter tubes, but solids concentrations are limited to about 15% or less to provide uniform temperatures. Pretreatment of large amounts of biomass at high solids concentrations is best carried out using direct steam injection and rapid pressure release, but closure of material balances in such “steam gun” devices is more difficult. Although flow of water alone or containing dilute acid is not practical commercially, such flow-through configurations provide valuable insight into biomass deconstruction kinetics not possible in the batch tubes, mixed reactors, or steam gun systems.

  8. A Microgravity Helium Dilution Cooler

    NASA Technical Reports Server (NTRS)

    Roach, Pat R.; Sperans, Joel (Technical Monitor)

    1994-01-01

    We are developing a He-3-He-4 dilution cooler to operate in microgravity. It uses charcoal adsorption pumps and heaters for its operation; it has no moving parts. It currently operates cyclically to well below 0.1 K and we have designed a version to operate continuously. We expect that the continuous version will be able to provide the long-duration cooling that many experiments need at temperatures down to 0.040 K. More importantly, such a dilution cooler could provide the precooling that enables the use of adiabatic demagnetization techniques that can reach temperatures below 0.001 K. At temperatures below 0.002 K many fascinating microgravity experiments on superfluid He-3 become possible. Among the possibilities are: research into a superfluid He-3 gyroscope, study of the nucleation of the B-phase of superfluid He-3 when the sample is floating out of contact with walls, study of the anisotropy of the surface tension of the B-phase, and NMR experiments on tiny free-floating clusters of superfluid He-3 atoms that should model the shell structure of nuclei.

  9. Serial ricinine levels in serum and urine after ricin intoxication.

    PubMed

    Røen, Bent Tore; Opstad, Aase Mari; Haavind, Anniken; Tønsager, Janne

    2013-06-01

    Ricinine is an alkaloid present in the castor bean plant (Ricinus communis) that can be used as a biomarker for ricin poisoning. Serial ricinine levels are reported in the serum and urine of a patient suffering from intentional ricin intoxication. The patient was brought to the hospital 4 h after injection and oral intake of a castor bean extract, but died 38 h later, despite intensive medical care. Ricinine was isolated from the samples by solid-phase extraction and quantitatively determined by isotopic dilution liquid chromatography-mass spectrometry. The ricinine level in serum declined from 33 to 23 ng/mL between 10 and 29 h post-exposure. Three urine samples collected from 12 to 41 h after ricin intoxication showed ricinine concentrations in the range of 20-58 ng/mL. The creatinine corrected values (21-30 µg/g) indicated a concentration-time profile with a maximum ricinine level in urine between 12 and 29 h after exposure.

  10. Neutral null models for diversity in serial transfer evolution experiments.

    PubMed

    Harpak, Arbel; Sella, Guy

    2014-09-01

    Evolution experiments with microorganisms coupled with genome-wide sequencing now allow for the systematic study of population genetic processes under a wide range of conditions. In learning about these processes in natural, sexual populations, neutral models that describe the behavior of diversity and divergence summaries have played a pivotal role. It is therefore natural to ask whether neutral models, suitably modified, could be useful in the context of evolution experiments. Here, we introduce coalescent models for polymorphism and divergence under the most common experimental evolution assay, a serial transfer experiment. This relatively simple setting allows us to address several issues that could affect diversity patterns in evolution experiments, whether selection is operating or not: the transient behavior of neutral polymorphism in an experiment beginning from a single clone, the effects of randomness in the timing of cell division and noisiness in population size in the dilution stage. In our analyses and discussion, we emphasize the implications for experiments aimed at measuring diversity patterns and making inferences about population genetic processes based on these measurements.

  11. A Serials Holdings List Using UNIX Refer.

    ERIC Educational Resources Information Center

    Boyce, Judith I.; Boyce, Bert R.

    1987-01-01

    Describes the production of an automated union list of serials holdings at minimal cost by a small consortium of state government libraries in Louisiana. Use of the UNIX Refer system without any modifications for data entry and production is described. (EM)

  12. Cooperative Serials Review: A Feasibility Study.

    ERIC Educational Resources Information Center

    Boston Library Consortium, MA.

    This report describes a 1980/81 project concerned with the formulation and validation of a model for determining whether cancellation and/or consolidation of serial subscriptions and holdings should be recommended to maximize the cost-effective use of combined collections and staff resources in the Boston Library Consortium (BLC). The publication…

  13. Inverting the modality effect in serial recall.

    PubMed

    Beaman, C Philip

    2002-04-01

    Differences in recall ability between immediate serial recall of auditorily and visually presented verbal material have traditionally been considered restricted to the end of to-be-recalled lists, the recency section of the serial position curve (e.g., Crowder & Morton, 1969). Later studies showed that--under certain circumstances--differences in recall between the two modalities can be observed across the whole of the list (Frankish, 1985). However in all these studies the advantage observed is for recall of material presented in the auditorily modality. Six separate conditions across four experiments demonstrate that a visual advantage can be obtained with serial recall if participants are required to recall the list in two distinct sections using serial recall. Judged on a list-wide basis, the visual advantage is of equivalent size to the auditory advantage of the classical modality effect. The results demonstrate that differences in representation of auditory and visual verbal material in short-term memory persist beyond lexical and phonological categorization and are problematic for current theories of the modality effect.

  14. Serial Position Curves in Free Recall

    ERIC Educational Resources Information Center

    Laming, Donald

    2010-01-01

    The scenario for free recall set out in Laming (2009) is developed to provide models for the serial position curves from 5 selected sets of data, for final free recall, and for multitrial free recall. The 5 sets of data reflect the effects of rate of presentation, length of list, delay of recall, and suppression of rehearsal. Each model…

  15. Supporting the Serial in the SERIOL Model

    ERIC Educational Resources Information Center

    Whitney, Carol

    2008-01-01

    It is commonly assumed that orthographical lexical access in visual word recognition takes place in parallel, with all letters activated at the same time. In contrast, in the SERIOL model of letter-position encoding, letters fire sequentially (Whitney, 2001). I present further support for such seriality on several fronts. (1) The reasons that led…

  16. Advances in Serials Management. Volume 6.

    ERIC Educational Resources Information Center

    Hepfer, Cindy, Ed.; Gammon, Julia, Ed.; Malinowski, Teresa, Ed.

    In order to further discussion and support constructive change, this volume presents the following eight papers on various dimensions of serials management: (1) "CD-ROMs, Surveys, and Sales: The OSA [Optical Society of America] Experience" (Frank E. Harris and Alan Tourtlotte); (2) "Management and Integration of Electronic Journals into the…

  17. Serial Position Effects in Nonword Repetition

    ERIC Educational Resources Information Center

    Gupta, P.; Lipinski, J.; Abbs, B.; Lin, P.H.

    2005-01-01

    A growing body of research has emphasized the linkage between performance in immediate serial recall of lists, nonword repetition, and word learning. Recently, it has been reported that primacy and recency effects are obtained in repetition of individual syllables within nonwords (Gupta, in press). Five experiments examined whether such…

  18. 24 CFR 3280.6 - Serial number.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Serial number. 3280.6 Section 3280.6 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND......

  19. Notes for Serials Cataloging. Second Edition.

    ERIC Educational Resources Information Center

    Geer, Beverley, Ed.; Caraway, Beatrice L., Ed.

    Notes are indispensable to serials cataloging. Researchers, reference librarians, and catalogers regularly use notes on catalog records and, as the audience for these notes has expanded from the local library community to the global Internet community, the need for notes to be cogent, clear, and useful is greater than ever. This book is a…

  20. Proposal for a National Serials Data System.

    ERIC Educational Resources Information Center

    Adams, Scott

    A hypothetical model is given for a National Serials Data System based on the best educated guesses of what the system should do and how, therefore, it should function. The model focuses attention on the ultimate goal rather than on the decision-making processes relating to choice of data elements, unique identification codes, etc. This conceptual…

  1. Parallel and Serial Processes in Visual Search

    ERIC Educational Resources Information Center

    Thornton, Thomas L.; Gilden, David L.

    2007-01-01

    A long-standing issue in the study of how people acquire visual information centers around the scheduling and deployment of attentional resources: Is the process serial, or is it parallel? A substantial empirical effort has been dedicated to resolving this issue. However, the results remain largely inconclusive because the methodologies that have…

  2. Recombinant UL30 antigen-based single serum dilution ELISA for detection of duck viral enteritis.

    PubMed

    Aravind, S; Patil, B R; Dey, Sohini; Mohan, C Madhan

    2012-11-01

    A recombinant UL30 antigen-based single serum dilution enzyme linked immunosorbent assay (ELISA) was developed to measure specific antibody in the sera of ducks against duck enteritis virus (DEV). The partial UL30 gene of DEV was cloned, expressed, purified and tested for its diagnostic use by designing a single serum dilution enzyme linked immuno-sorbent assay (ELISA). A total of 226 duck sera samples were tested using the assay. A linear relationship was found between the predicted antibody titres at a single working dilution of 1:100 and the corresponding serum titres observed as determined by the standard serial dilution method. Regression analysis was used to determine a standard curve from which an equation was derived which demonstrated this correlation. The equation was then used to convert the corrected absorbance readings of the single working dilution directly into the predicted ELISA antibody titres. The assay proved to be specific, sensitive and accurate as compared to the virus neutralization test with a specificity, sensitivity and accuracy being 96%, 95% and 95% respectively.

  3. Recalling visual serial order for verbal sequences.

    PubMed

    Logie, Robert H; Saito, Satoru; Morita, Aiko; Varma, Samarth; Norris, Dennis

    2016-05-01

    We report three experiments in which participants performed written serial recall of visually presented verbal sequences with items varying in visual similarity. In Experiments 1 and 2 native speakers of Japanese recalled visually presented Japanese Kanji characters. In Experiment 3, native speakers of English recalled visually presented words. In all experiments, items varied in visual similarity and were controlled for phonological similarity. For Kanji and for English, performance on lists comprising visually similar items was overall poorer than for lists of visually distinct items across all serial positions. For mixed lists in which visually similar and visually distinct items alternated through the list, a clear "zig-zag" pattern appeared with better recall of the visually distinct items than for visually similar items. This is the first time that this zig-zag pattern has been shown for manipulations of visual similarity in serial-ordered recall. These data provide new evidence that retaining a sequence of visual codes relies on similar principles to those that govern the retention of a sequence of phonological codes. We further illustrate this by demonstrating that the data patterns can be readily simulated by at least one computational model of serial-ordered recall, the Primacy model (Page and Norris, Psychological Review, 105(4), 761-81, 1998). Together with previous evidence from neuropsychological studies and experimental studies with healthy adults, these results are interpreted as consistent with two domain-specific, limited-capacity, temporary memory systems for phonological material and for visual material, respectively, each of which uses similar processes that have evolved to be optimal for retention of serial order.

  4. XAFS in dilute magnetic semiconductors.

    PubMed

    Sun, Zhihu; Yan, Wensheng; Yao, Tao; Liu, Qinghua; Xie, Yi; Wei, Shiqiang

    2013-10-14

    X-Ray absorption fine structure (XAFS) spectroscopy has experienced a rapid development in the last four decades and has proved to be a powerful structure characterization technique in the study of local environments in condensed matter. In this article, we first introduce the XAFS basic principles including theory, data analysis and experiment in some detail. Then we attempt to make a review on the applications of XAFS to the study of atomic and electronic structure in dilute magnetic semiconductor (DMS) systems. The power of XAFS in characterizing this interesting material system, such as determining the occupation sites and distribution of the dopants, detecting the presence of metal clusters or secondary phases, as well as identifying the defect types and dopant valence, will be illuminated by selected examples. This review should be of interest both to newcomers in the DMS field and to an interdisciplinary community of researchers working in synthesis, characterization and utilization of DMS materials. PMID:23884341

  5. Desynchronization in diluted neural networks

    SciTech Connect

    Zillmer, Ruediger; Livi, Roberto; Politi, Antonio; Torcini, Alessandro

    2006-09-15

    The dynamical behavior of a weakly diluted fully inhibitory network of pulse-coupled spiking neurons is investigated. Upon increasing the coupling strength, a transition from regular to stochasticlike regime is observed. In the weak-coupling phase, a periodic dynamics is rapidly approached, with all neurons firing with the same rate and mutually phase locked. The strong-coupling phase is characterized by an irregular pattern, even though the maximum Lyapunov exponent is negative. The paradox is solved by drawing an analogy with the phenomenon of 'stable chaos', i.e., by observing that the stochasticlike behavior is 'limited' to an exponentially long (with the system size) transient. Remarkably, the transient dynamics turns out to be stationary.

  6. Band anticrossing in dilute nitrides

    SciTech Connect

    Shan, W.; Yu, K.M.; Walukiewicz, W.; Wu, J.; Ager III, J.W.; Haller, E.E.

    2003-12-23

    Alloying III-V compounds with small amounts of nitrogen leads to dramatic reduction of the fundamental band-gap energy in the resulting dilute nitride alloys. The effect originates from an anti-crossing interaction between the extended conduction-band states and localized N states. The interaction splits the conduction band into two nonparabolic subbands. The downward shift of the lower conduction subband edge is responsible for the N-induced reduction of the fundamental band-gap energy. The changes in the conduction band structure result in significant increase in electron effective mass and decrease in the electron mobility, and lead to a large enhance of the maximum doping level in GaInNAs doped with group VI donors. In addition, a striking asymmetry in the electrical activation of group IV and group VI donors can be attributed to mutual passivation process through formation of the nearest neighbor group-IV donor nitrogen pairs.

  7. XAFS in dilute magnetic semiconductors.

    PubMed

    Sun, Zhihu; Yan, Wensheng; Yao, Tao; Liu, Qinghua; Xie, Yi; Wei, Shiqiang

    2013-10-14

    X-Ray absorption fine structure (XAFS) spectroscopy has experienced a rapid development in the last four decades and has proved to be a powerful structure characterization technique in the study of local environments in condensed matter. In this article, we first introduce the XAFS basic principles including theory, data analysis and experiment in some detail. Then we attempt to make a review on the applications of XAFS to the study of atomic and electronic structure in dilute magnetic semiconductor (DMS) systems. The power of XAFS in characterizing this interesting material system, such as determining the occupation sites and distribution of the dopants, detecting the presence of metal clusters or secondary phases, as well as identifying the defect types and dopant valence, will be illuminated by selected examples. This review should be of interest both to newcomers in the DMS field and to an interdisciplinary community of researchers working in synthesis, characterization and utilization of DMS materials.

  8. Cementable implant-supported prosthesis, serial extraction, and serial implant installation: case report.

    PubMed

    Rosen, Harry; Gornitsky, Mervyn

    2004-12-01

    Cement-retained implant-supported prostheses are particularly indicated where access for screw placement is limited or impossible like in posterior locations or where there is limited jaw opening. The patient in this case report suffered from limited jaw opening as a result of a long history of temporomandibular joint ankylosis related to hemophilia. Cement-retained implant-supported prostheses coupled with serial extraction, serial implant installations, and chairside provisional restorations made uneventful treatment possible.

  9. Evaluation of clinical chemistry analytes from a single mouse using diluted plasma: effective way to reduce the number of animals in toxicity studies.

    PubMed

    Goyal, Vinod Kumar; Pandey, Santosh Kumar; Kakade, Somesh; Nirogi, Ramakrishna

    2016-10-01

    Clinical chemistry is an essential analytical tool in many areas of research, drug assessment and development, and in the evaluation of general health. A certain amount of blood is required to evaluate all blood analytes. Experiments where mice are used, it is difficult to measure all analytes due to the small amount of blood that can be obtained from a single animal. To overcome this problem, separate cohorts of animals are used in toxicity studies for hematology and biochemistry analysis. This requires the use of extra animals and additional resources. Hence interpretation of results derived from using these different animals can be unreliable. This study was undertaken to explore the possibility of using diluted plasma for measuring various biochemistry analytes. Plasma from mice was diluted to 3, 5 and 10-fold with Water for Injection, and various biochemistry analytes were analyzed using an automated analyzer. Results of diluted and undiluted plasma from the same mouse were compared. Most of the analytes from the diluted plasma were found to be well within the ranges of the undiluted plasma except for sodium, potassium and chloride. Diluting plasma to analyze some analytes also freed up undiluted plasma for analyzing electrolytes. In conclusion, in order to obtain reliable and interpretable data from a single mouse it is worthwhile considering diluting the plasma, which should reduce the number of animals used in an experiment.

  10. Serial Recall and the Modality Effect: Effects of Word Frequency

    ERIC Educational Resources Information Center

    Watkins, Olga C.; Watkins, Michael J.

    1977-01-01

    Serial position curves for the immediate serial recall of supraspan word lists were investigated as a joint function of input modality and the frequency with which the list words occur in everyday usage. (Editor)

  11. Dilution in single pass arc welds

    SciTech Connect

    DuPont, J.N.; Marder, A.R.

    1996-06-01

    A study was conducted on dilution of single pass arc welds of type 308 stainless steel filler metal deposited onto A36 carbon steel by the plasma arc welding (PAW), gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and submerged arc welding (SAW) processes. Knowledge of the arc and melting efficiency was used in a simple energy balance to develop an expression for dilution as a function of welding variables and thermophysical properties of the filler metal and substrate. Comparison of calculated and experimentally determined dilution values shows the approach provides reasonable predictions of dilution when the melting efficiency can be accurately predicted. The conditions under which such accuracy is obtained are discussed. A diagram is developed from the dilution equation which readily reveals the effect of processing parameters on dilution to aid in parameter optimization.

  12. Magnetic Particle Recovery of Serial Numbers

    SciTech Connect

    D. Utrata; M.J. Johnson

    2003-10-01

    One method used by crime labs to recover obliterated serial numbers in steel firearms (ferrous samples) is the magnetic particle technique. The use of this method is predicated on the detection of metal deformation present under stamped serial numbers after the visible stamp has been removed. Equipment specialized for this detection is not used in these attempts; a portable magnetic yoke used typically for flaw detection on large weldments or structures, along with dry visible magnetic powders, have been the tools of criminologists working in this area. Crime labs have reported low success rates using these tools [1, 2]. This is not surprising when one considers that little formal development has apparently evolved for use in such investigations since the publication of seminal work in this area some time ago [3]. The aim of this project is to investigate specific aspects of magnetic particle inspection for serial number recovery. This includes attempts to understand the magnetic characteristics of different steels that affect their performance in the test, such as varying results for carbon steels and alloy steels after different thermal and forming treatments. Also investigated are the effects of the nature of the sample magnetization (AC, rectified DC, and true DC) and the use of various detection media, such as visible powders and fluorescent sprays, on test outcome. Additionally, some aspects of surface preparation of firearm samples prior to number recovery were included in this work. The scope of this report includes a brief overview of the magnetic particle inspection method in general and its applications to forensic serial number recovery. This is followed by a description of how such investigations were simulated on lab samples, including a look at how the microstructure of a given steel will affect its performance in the test. Investigations into the serial number recovery in a series of ferromagnetic firearms (both steel and certain stainless steels

  13. National Serials Data Program; Phase I, Final Report.

    ERIC Educational Resources Information Center

    Library of Congress, Washington, DC. Information Systems Office.

    The primary objective of the National Serials Data Program is the design and implementation of a national serials information system. The goals of this system are the provisions of timely, accurate, and comprehensive information about serial publications within a framework of quantitative efficiency and agreed upon cost effectiveness. The intent…

  14. English Literature: A Student's Guide to Serial Bibliographies.

    ERIC Educational Resources Information Center

    McGill Univ., Montreal (Quebec). McLennan Library.

    This selected guide to serial bibliographies covering English language literature is based on an essay bibliography by David E. Pownall. Other bibliographies of serial bibliographies which were consulted include "A Reference Guide to English Studies,""Periodicals Containing Reviews and Bibliographies,""Serial Bibliographies in the Humanities and…

  15. 7 CFR 29.9205 - Identification number (farm serial number).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate...

  16. 7 CFR 29.9205 - Identification number (farm serial number).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate...

  17. Output order in immediate serial recall.

    PubMed

    Tan, Lydia; Ward, Geoff

    2007-07-01

    In two experiments, we examined the effect of output order in immediate serial recall (ISR). In Experiment 1, three groups of participants saw lists of eight words and wrote down the words in the rows corresponding to their serial positions in an eight-row response grid. One group was precued to respond in forward order, a second group was precued to respond in any order, and a third group was postcued for response order. There were significant effects of output order, but not of cue type. Relative to the forward output order, the free output order led to enhanced recency and diminished primacy, with superior performance for words output early in recall. These results were replicated in Experiment 2 using six-item lists, which further suggests that output order plays an important role in the primacy effect in ISR and that the recency items are most highly accessible at recall.

  18. Serial Millisecond Crystallography of Membrane Proteins.

    PubMed

    Jaeger, Kathrin; Dworkowski, Florian; Nogly, Przemyslaw; Milne, Christopher; Wang, Meitian; Standfuss, Joerg

    2016-01-01

    Serial femtosecond crystallography (SFX) at X-ray free-electron lasers (XFELs) is a powerful method to determine high-resolution structures of pharmaceutically relevant membrane proteins. Recently, the technology has been adapted to carry out serial millisecond crystallography (SMX) at synchrotron sources, where beamtime is more abundant. In an injector-based approach, crystals grown in lipidic cubic phase (LCP) or embedded in viscous medium are delivered directly into the unattenuated beam of a microfocus beamline. Pilot experiments show the application of microjet-based SMX for solving the structure of a membrane protein and compatibility of the method with de novo phasing. Planned synchrotron upgrades, faster detectors and software developments will go hand-in-hand with developments at free-electron lasers to provide a powerful methodology for solving structures from microcrystals at room temperature, ligand screening or crystal optimization for time-resolved studies with minimal or no radiation damage. PMID:27553240

  19. Bias-corrected confidence intervals for the concentration parameter in a dilution assay.

    PubMed

    Wang, J; Basu, S

    1999-03-01

    Interval estimates of the concentration of target entities from a serial dilution assay are usually based on the maximum likelihood estimator. The distribution of the maximum likelihood estimator is skewed to the right and is positively biased. This bias results in interval estimates that either provide inadequate coverage relative to the nominal level or yield excessively long intervals. Confidence intervals based on both log transformation and bias reduction are proposed and are shown through simulations to provide appropriate coverage with shorter widths than the commonly used intervals in a variety of designs. An application to feline AIDS research, which motivated this work, is also presented.

  20. Serial correlation in the Italian futures market

    NASA Astrophysics Data System (ADS)

    Bianco, Simone; Reno, Roberto

    2005-05-01

    We study the serial correlation of high-frequency intraday returns on the Italian stock index futures (FIB30) in the period 2000-2002. We adopt three different methods of analysis: the spectral density via Fast Fourier Transform, Detrended Fluctuation Analysis (DFA) and the Variance Ratio test. We find that intraday autocorrelation is mostly negative for time scales lower than 20 minutes, but we support the efficiency of the Italian futures market.

  1. Infantile Refsum disease: serial evaluation with MRI.

    PubMed

    Cakirer, Sinan; Savas, Mahmut R

    2005-02-01

    Refsum disease is a rare metabolic disorder, which is characterized by the accumulation of phytanic acid in the blood and tissues, including the brain. A variant of this condition that occurs in young children is called infantile Refsum disease. The MRI findings of symmetrical signal change involving the corticospinal tracts, cerebellar dentate nuclei, and corpus callosum are characteristic. We report the serial MRI findings of a child with this rare metabolic disorder.

  2. Lipidic phase membrane protein serial femtosecond crystallography

    PubMed Central

    Johansson, Linda C; Arnlund, David; White, Thomas A; Katona, Gergely; DePonte, Daniel P; Weierstall, Uwe; Doak, R Bruce; Shoeman, Robert L; Lomb, Lukas; Malmerberg, Erik; Davidsson, Jan; Nass, Karol; Liang, Mengning; Andreasson, Jakob; Aquila, Andrew; Bajt, Sasa; Barthelmess, Miriam; Barty, Anton; Bogan, Michael J; Bostedt, Christoph; Bozek, John D; Caleman, Carl; Coffee, Ryan; Coppola, Nicola; Ekeberg, Tomas; Epp, Sascha W; Erk, Benjamin; Fleckenstein, Holger; Foucar, Lutz; Graafsma, Heinz; Gumprecht, Lars; Hajdu, Janos; Hampton, Christina Y; Hartmann, Robert; Hartmann, Andreas; Hauser, Günter; Hirsemann, Helmut; Holl, Peter; Hunter, Mark S; Kassemeyer, Stephan; Kimmel, Nils; Kirian, Richard A; Maia, Filipe R N C; Marchesini, Stefano; Martin, Andrew V; Reich, Christian; Rolles, Daniel; Rudek, Benedikt; Rudenko, Artem; Schlichting, Ilme; Schulz, Joachim; Seibert, M Marvin; Sierra, Raymond G; Soltau, Heike; Starodub, Dmitri; Stellato, Francesco; Stern, Stephan; Strüder, Lothar; Timneanu, Nicusor; Ullrich, Joachim; Wahlgren, Weixiao Y; Wang, Xiaoyu; Weidenspointner, Georg; Wunderer, Cornelia; Fromme, Petra; Chapman, Henry N; Spence, John C H; Neutze, Richard

    2012-01-01

    X-ray free electron laser (X-feL)-based serial femtosecond crystallography is an emerging method with potential to rapidly advance the challenging field of membrane protein structural biology. here we recorded interpretable diffraction data from micrometer-sized lipidic sponge phase crystals of the Blastochloris viridis photosynthetic reaction center delivered into an X-feL beam using a sponge phase micro-jet. PMID:22286383

  3. Lipidic phase membrane protein serial femtosecond crystallography.

    PubMed

    Johansson, Linda C; Arnlund, David; White, Thomas A; Katona, Gergely; Deponte, Daniel P; Weierstall, Uwe; Doak, R Bruce; Shoeman, Robert L; Lomb, Lukas; Malmerberg, Erik; Davidsson, Jan; Nass, Karol; Liang, Mengning; Andreasson, Jakob; Aquila, Andrew; Bajt, Saša; Barthelmess, Miriam; Barty, Anton; Bogan, Michael J; Bostedt, Christoph; Bozek, John D; Caleman, Carl; Coffee, Ryan; Coppola, Nicola; Ekeberg, Tomas; Epp, Sascha W; Erk, Benjamin; Fleckenstein, Holger; Foucar, Lutz; Graafsma, Heinz; Gumprecht, Lars; Hajdu, Janos; Hampton, Christina Y; Hartmann, Robert; Hartmann, Andreas; Hauser, Günter; Hirsemann, Helmut; Holl, Peter; Hunter, Mark S; Kassemeyer, Stephan; Kimmel, Nils; Kirian, Richard A; Maia, Filipe R N C; Marchesini, Stefano; Martin, Andrew V; Reich, Christian; Rolles, Daniel; Rudek, Benedikt; Rudenko, Artem; Schlichting, Ilme; Schulz, Joachim; Seibert, M Marvin; Sierra, Raymond G; Soltau, Heike; Starodub, Dmitri; Stellato, Francesco; Stern, Stephan; Strüder, Lothar; Timneanu, Nicusor; Ullrich, Joachim; Wahlgren, Weixiao Y; Wang, Xiaoyu; Weidenspointner, Georg; Wunderer, Cornelia; Fromme, Petra; Chapman, Henry N; Spence, John C H; Neutze, Richard

    2012-03-01

    X-ray free electron laser (X-FEL)-based serial femtosecond crystallography is an emerging method with potential to rapidly advance the challenging field of membrane protein structural biology. Here we recorded interpretable diffraction data from micrometer-sized lipidic sponge phase crystals of the Blastochloris viridis photosynthetic reaction center delivered into an X-FEL beam using a sponge phase micro-jet.

  4. Lipidic phase membrane protein serial femtosecond crystallography.

    PubMed

    Johansson, Linda C; Arnlund, David; White, Thomas A; Katona, Gergely; Deponte, Daniel P; Weierstall, Uwe; Doak, R Bruce; Shoeman, Robert L; Lomb, Lukas; Malmerberg, Erik; Davidsson, Jan; Nass, Karol; Liang, Mengning; Andreasson, Jakob; Aquila, Andrew; Bajt, Saša; Barthelmess, Miriam; Barty, Anton; Bogan, Michael J; Bostedt, Christoph; Bozek, John D; Caleman, Carl; Coffee, Ryan; Coppola, Nicola; Ekeberg, Tomas; Epp, Sascha W; Erk, Benjamin; Fleckenstein, Holger; Foucar, Lutz; Graafsma, Heinz; Gumprecht, Lars; Hajdu, Janos; Hampton, Christina Y; Hartmann, Robert; Hartmann, Andreas; Hauser, Günter; Hirsemann, Helmut; Holl, Peter; Hunter, Mark S; Kassemeyer, Stephan; Kimmel, Nils; Kirian, Richard A; Maia, Filipe R N C; Marchesini, Stefano; Martin, Andrew V; Reich, Christian; Rolles, Daniel; Rudek, Benedikt; Rudenko, Artem; Schlichting, Ilme; Schulz, Joachim; Seibert, M Marvin; Sierra, Raymond G; Soltau, Heike; Starodub, Dmitri; Stellato, Francesco; Stern, Stephan; Strüder, Lothar; Timneanu, Nicusor; Ullrich, Joachim; Wahlgren, Weixiao Y; Wang, Xiaoyu; Weidenspointner, Georg; Wunderer, Cornelia; Fromme, Petra; Chapman, Henry N; Spence, John C H; Neutze, Richard

    2012-03-01

    X-ray free electron laser (X-FEL)-based serial femtosecond crystallography is an emerging method with potential to rapidly advance the challenging field of membrane protein structural biology. Here we recorded interpretable diffraction data from micrometer-sized lipidic sponge phase crystals of the Blastochloris viridis photosynthetic reaction center delivered into an X-FEL beam using a sponge phase micro-jet. PMID:22286383

  5. Serial FBG sensor network allowing overlapping spectra

    NASA Astrophysics Data System (ADS)

    Abbenseth, S.; Lochmann, S.; Ahrens, A.; Rehm, B.

    2016-05-01

    For structure or material monitoring low impact serial fiber Bragg grating (FBG) networks have attracted increasing research interest. Common sensor networks using wavelength division multiplexing (WDM) for FBG interrogation are limited in their efficiency by the spectral width of their light source, the FBG tuning range and the spectral guard bands. Overlapping spectra are strictly forbidden in this case. Applying time division multiplexing (TDM) or active resonator schemes may overcome these restrictions. However, they introduce other substantial disadvantages like signal roundtrip dependency or sophisticated control of active resonating structures. Code division multiplexing (CDM) as a means of FBG interrogation by simple autocorrelation of appropriate codes has been shown to be superior in this respect. However, it came at the cost of a second spectrometer introducing additional equalization efforts. We demonstrate a new serial FBG sensor network utilizing CDM signal processing for efficient sensor interrogation without the need of a second spectrometer and additional state of polarization (SOP) controlling components. It allows overlapping spectra even when all sensing FBGs are positioned at the same centre wavelength and it shows a high degree of insensitivity to SOP. Sequence inversed keyed (SIK) serial signal processing utilizing quasi-orthogonal balanced codes ensures simple and quick sensor interrogation with high signal-to-interference/noise ratio.

  6. Serial reversal learning in bumblebees (Bombus impatiens).

    PubMed

    Strang, Caroline G; Sherry, David F

    2014-05-01

    Bumblebees are capable of rapidly learning discriminations, but flexibility in bumblebee learning is less well understood. We tested bumblebees (Bombus impatiens) on a serial reversal learning task. A serial reversal task requires learning of an initial discrimination between two differentially rewarded stimuli, followed by multiple reversals of the reward contingency between stimuli. A reduction in errors with repeated reversals in a serial reversal task is an indicator of behavioural flexibility. Bees were housed in a large indoor environment and tested during foraging flights. Testing free-flying bees allowed for large numbers of trials and reversals. All bees were trained to perform a simultaneous discrimination between two colours for a nectar reward, followed by nine reversals of this discrimination. Results showed that bumblebees reduced errors and improved their performance across successive reversals. A reduction in perseverative errors was the major cause of the improvement in performance. Bees showed a slight increase in error rate in their final trials, perhaps as a consequence of increasing proactive interference, but proactive interference may also have contributed to the overall improvement in performance across reversals. Bumblebees are thus capable of behavioural flexibility comparable to that of other animals and may use proactive interference as a mechanism of behavioural flexibility in varying environments.

  7. Serial Pixel Analog-to-Digital Converter

    SciTech Connect

    Larson, E D

    2010-02-01

    This method reduces the data path from the counter to the pixel register of the analog-to-digital converter (ADC) from as many as 10 bits to a single bit. The reduction in data path width is accomplished by using a coded serial data stream similar to a pseudo random number (PRN) generator. The resulting encoded pixel data is then decoded into a standard hexadecimal format before storage. The high-speed serial pixel ADC concept is based on the single-slope integrating pixel ADC architecture. Previous work has described a massively parallel pixel readout of a similar architecture. The serial ADC connection is similar to the state-of-the art method with the exception that the pixel ADC register is a shift register and the data path is a single bit. A state-of-the-art individual-pixel ADC uses a single-slope charge integration converter architecture with integral registers and “one-hot” counters. This implies that parallel data bits are routed among the counter and the individual on-chip pixel ADC registers. The data path bit-width to the pixel is therefore equivalent to the pixel ADC bit resolution.

  8. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... interval. You may use the difference between a diluted exhaust flow meter and a dilution air meter to.... We recommend that you use a diluted exhaust flow meter that meets the specifications in Table 1 of... verification in § 1065.307 and the calibration and verifications in § 1065.340 and § 1065.341. You may use...

  9. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... interval. You may use the difference between a diluted exhaust flow meter and a dilution air meter to.... We recommend that you use a diluted exhaust flow meter that meets the specifications in Table 1 of... verification in § 1065.307 and the calibration and verifications in § 1065.340 and § 1065.341. You may use...

  10. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... interval. You may use the difference between a diluted exhaust flow meter and a dilution air meter to.... We recommend that you use a diluted exhaust flow meter that meets the specifications in Table 1 of... verification in § 1065.307 and the calibration and verifications in § 1065.340 and § 1065.341. You may use...

  11. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... interval. You may use the difference between a diluted exhaust flow meter and a dilution air meter to.... We recommend that you use a diluted exhaust flow meter that meets the specifications in Table 1 of... verification in § 1065.307 and the calibration and verifications in § 1065.340 and § 1065.341. You may use...

  12. Implementation of a Multichannel Serial Data Streaming Algorithm using the Xilinx Serial RapidIO Solution

    NASA Technical Reports Server (NTRS)

    Doxley, Charles A.

    2016-01-01

    In the current world of applications that use reconfigurable technology implemented on field programmable gate arrays (FPGAs), there is a need for flexible architectures that can grow as the systems evolve. A project has limited resources and a fixed set of requirements that development efforts are tasked to meet. Designers must develop robust solutions that practically meet the current customer demands and also have the ability to grow for future performance. This paper describes the development of a high speed serial data streaming algorithm that allows for transmission of multiple data channels over a single serial link. The technique has the ability to change to meet new applications developed for future design considerations. This approach uses the Xilinx Serial RapidIO LOGICORE Solution to implement a flexible infrastructure to meet the current project requirements with the ability to adapt future system designs.

  13. A spatial modality effect in serial memory.

    PubMed

    Tremblay, Sébastien; Parmentier, Fabrice B R; Guérard, Katherine; Nicholls, Alastair P; Jones, Dylan M

    2006-09-01

    In 2 experiments, the authors tested whether the classical modality effect-that is, the stronger recency effect for auditory items relative to visual items-can be extended to the spatial domain. An order reconstruction task was undertaken with four types of material: visual-spatial, auditory-spatial, visual-verbal, and auditory-verbal. Similar serial position curves were obtained regardless of the nature of the to-be-remembered sequences, with the exception that a modality effect was found with spatial as well as with verbal materials. The results are discussed with regard to a number of models of short-term memory.

  14. Serial Femtosecond Crystallography of Membrane Proteins.

    PubMed

    Zhu, Lan; Weierstall, Uwe; Cherezov, Vadim; Liu, Wei

    2016-01-01

    Membrane proteins, including G protein-coupled receptors (GPCRs), constitute the most important drug targets. The increasing number of targets requires new structural information, which has proven tremendously challenging due to the difficulties in growing diffraction-quality crystals. Recent developments of serial femtosecond crystallography at X-ray free electron lasers combined with the use of membrane-mimetic gel-like matrix of lipidic cubic phase (LCP-SFX) for crystal growth and delivery hold significant promise to accelerate structural studies of membrane proteins. This chapter describes the development and current status of the LCP-SFX technology and elaborates its future role in structural biology of membrane proteins. PMID:27553241

  15. CAR-T cells are serial killers

    PubMed Central

    Davenport, Alexander J; Jenkins, Misty R; Ritchie, David S; Prince, H Miles; Trapani, Joseph A; Kershaw, Michael H; Darcy, Phillip K; Neeson, Paul J

    2015-01-01

    Chimeric antigen receptor (CAR) T cells have enjoyed unprecedented clinical success against haematological malignancies in recent years. However, several aspects of CAR T cell biology remain unknown. We recently compared CAR and T cell receptor (TCR)-based killing in the same effector cell and showed that CAR T cells can not only efficiently kill single tumor targets, they can also kill multiple tumor targets in a sequential manner. Single and serial killing events were not sustained long term due to CAR down-regulation after 20 hours. PMID:26587330

  16. Serial cholinesterase estimation in carbamate poisoning.

    PubMed

    Pinakini, K S; Kumar, T S Mohan

    2006-07-01

    Poisoning is one of the most important causes of morbidity and mortality in developing countries like India. Anticholinesterase compounds like organophosphates (OP) and carbamates account for the majority of these poisoning cases because of their easy availability and agricultural use. Carbamates are as popular as OPs as insecticides that often go undiagnosed. A fatal case of carbofuran poisoning is presented where serial cholinesterase estimation played a major role in the diagnosis of the same. The pertinent medical literature on carbofuran poisoning is reviewed. The establishment of poison information center in each state is needed for proper diagnosis and management of poisoning cases.

  17. Automated Serial Sectioning for 3D Reconstruction

    NASA Technical Reports Server (NTRS)

    Alkemper, Jen; Voorhees, Peter W.

    2003-01-01

    Some aspects of an apparatus and method for automated serial sectioning of a specimen of a solder, aluminum, or other relatively soft opaque material are discussed. The apparatus includes a small milling machine (micromiller) that takes precise, shallow cuts (increments of depth as small as 1 micron) to expose successive sections. A microscope equipped with an electronic camera, mounted in a fixed position on the micromiller, takes pictures of the newly exposed specimen surface at each increment of depth. The images are digitized, and the resulting data are subsequently processed to reconstruct three-dimensional (3D) features of the specimen.

  18. Fast serial link using optical fibers

    NASA Astrophysics Data System (ADS)

    Leach, R. W.

    1986-01-01

    In virtue of offering complete immunity from EMI, fiber-optics links for digital data are useful in the isolation of sensitive detecting apparatus from noisy digital computers. Attention is presently given to one such serial data link employing commercially available transmitter, receiver, cable and connector components together with an encoder/decoder circuit employing standard TTL digital logic components. Although designed for high speed fiber-optic operation, the circuit is equally well suited to medium- or low-speed operation over wires and does not have to transmit a separate clock. A data error rate is measured through operation of the link for a lengthy period of time.

  19. Impact of recycling stillage on conversion of dilute sulfuric acid pretreated corn stover to ethanol.

    PubMed

    Mohagheghi, Ali; Schell, Daniel J

    2010-04-01

    Both the current corn starch to ethanol industry and the emerging lignocellulosic biofuels industry view recycling of spent fermentation broth or stillage as a method to reduce fresh water use. The objective of this study was to understand the impact of recycling stillage on conversion of corn stover to ethanol. Sugars in a dilute-acid pretreated corn stover hydrolysate were fermented to ethanol by the glucose-xylose fermenting bacteria Zymomonas mobilis 8b. Three serial fermentations were performed at two different initial sugar concentrations using either 10% or 25% of the stillage as makeup water for the next fermentation in the series. Serial fermentations were performed to achieve near steady state concentration of inhibitors and other compounds in the corn stover hydrolysate. Little impact on ethanol yields was seen at sugar concentrations equivalent to pretreated corn stover slurry at 15% (w/w) with 10% recycle of the stillage. However, ethanol yields became progressively poorer as the sugar concentration increased and fraction of the stillage recycled increased. At an equivalent corn stover slurry concentration of 20% with 25% recycled stillage the ethanol yield was only 5%. For this microorganism with dilute-acid pretreated corn stover, recycling a large fraction of the stillage had a significant negative impact on fermentation performance. Although this finding is of concern for biochemical-based lignocellulose conversion processes, other microorganism/pretreatment technology combinations will likely perform differently.

  20. Impact of recycling stillage on conversion of dilute sulfuric acid pretreated corn stover to ethanol.

    PubMed

    Mohagheghi, Ali; Schell, Daniel J

    2010-04-01

    Both the current corn starch to ethanol industry and the emerging lignocellulosic biofuels industry view recycling of spent fermentation broth or stillage as a method to reduce fresh water use. The objective of this study was to understand the impact of recycling stillage on conversion of corn stover to ethanol. Sugars in a dilute-acid pretreated corn stover hydrolysate were fermented to ethanol by the glucose-xylose fermenting bacteria Zymomonas mobilis 8b. Three serial fermentations were performed at two different initial sugar concentrations using either 10% or 25% of the stillage as makeup water for the next fermentation in the series. Serial fermentations were performed to achieve near steady state concentration of inhibitors and other compounds in the corn stover hydrolysate. Little impact on ethanol yields was seen at sugar concentrations equivalent to pretreated corn stover slurry at 15% (w/w) with 10% recycle of the stillage. However, ethanol yields became progressively poorer as the sugar concentration increased and fraction of the stillage recycled increased. At an equivalent corn stover slurry concentration of 20% with 25% recycled stillage the ethanol yield was only 5%. For this microorganism with dilute-acid pretreated corn stover, recycling a large fraction of the stillage had a significant negative impact on fermentation performance. Although this finding is of concern for biochemical-based lignocellulose conversion processes, other microorganism/pretreatment technology combinations will likely perform differently. PMID:19998277

  1. Report of the ARL Serials Prices Project. A Compilation of Reports Examining the Serials Prices Problem.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC.

    The rising prices of journals and serials--major information sources for academic and research communities--are explored in this work, which presents two contractor reports on the topic. These two reports are introduced by an overview and summary together with recommendations for further Association of Research Libraries (ARL) action, short…

  2. Concurrent Cognitive Processes in Rat Serial Pattern Learning: Item Memory, Serial Position, and Pattern Structure

    ERIC Educational Resources Information Center

    Muller, Melissa D.; Fountain, Stephen B.

    2010-01-01

    Three experiments examined the processes mediating rat serial pattern learning for rule-consistent versus rule-violating pattern elements ("violation elements"). In all three experiments, rats were trained to press retractable levers in a circular array in a specific sequence for brain-stimulation reward (BSR). Experiment 1 examined the role of…

  3. Calibration graphs in isotope dilution mass spectrometry.

    PubMed

    Pagliano, Enea; Mester, Zoltán; Meija, Juris

    2015-10-01

    Isotope-based quantitation is routinely employed in chemical measurements. Whereas most analysts seek for methods with linear theoretical response functions, a unique feature that distinguishes isotope dilution from many other analytical methods is the inherent possibility for a nonlinear theoretical response curve. Most implementations of isotope dilution calibration today either eliminate the nonlinearity by employing internal standards with markedly different molecular weight or they employ empirical polynomial fits. Here we show that the exact curvature of any isotope dilution curve can be obtained from three-parameter rational function, y = f(q) = (a0 + a1q)/(1 + a2q), known as the Padé[1,1] approximant. The use of this function allows eliminating an unnecessary source of error in isotope dilution analysis when faced with nonlinear calibration curves. In addition, fitting with Padé model can be done using linear least squares.

  4. Helium Dilution Cryocooler for Space Applications

    NASA Technical Reports Server (NTRS)

    Roach, Pat; Hogan, Robert (Technical Monitor)

    2001-01-01

    NASA's New Millenium Program Space Technology presents the Helium Dilution Cryocooler for Space Applications. The topics include: 1) Capability; 2) Applications; and 3) Advantages. This paper is in viewgraph form.

  5. Malingering, coaching, and the serial position effect.

    PubMed

    Suhr, Julie A

    2002-01-01

    The normal pattern of performance on list-learning tasks is to recall more words from the beginning (primacy) and end (recency) of the list. This pattern is also seen in patients with closed head injury, but malingerers tend to recall less words from the beginning of word lists, leading to a suppressed primacy effect. The present study examined this pattern on both learning trials and delayed recall of the Auditory Verbal Learning Test (AVLT) in 34 persons performing with normal effort, 38 naive malingerers, 33 warned malingerers, and 29 head-injured patients. Both malingering groups had lower scores on the primacy portion of the list during learning trials, while normals and head-injured patients had normal serial position curves. During delayed recall, normals and head-injured patients did better than the two malingering groups on middle and recency portions of the list. Findings suggest that the serial position effect during learning trials may be a useful pattern of performance to watch for when suspicious of malingering.

  6. [Linkage analysis of serial sex crimes].

    PubMed

    Yokota, Kaeko; Watanabe, Kazumi; Wachi, Taeko; Otsuka, Yusuke; Kuraishi, Hiroki; Fujita, Goro

    2015-08-01

    The purpose of this study was twofold: first, to create an index for a behavioral linkage analysis of serial sex crimes, and second, to construct a predictive model for the analysis. Data on 720 sex crimes (rape, indecent assault) committed by 360 offenders arrested between 1993 and 2005 throughout Japan were collected. The following seven behaviors were examined during a series of analyses aimed at illustrating the effectiveness of crime linkage in serial sex crimes: victim age group, area type, publicness of offense site, weapon, time, contact method, and day of the week. The results indicated that six of the seven behaviors (excluding "day of the week") significantly distinguished between linked and unlinked crime pairs. Under a logistic regression of these six variables, which were dichotomously coded in terms of the concordance or discordance between each pair of incidents, the area under the receiver operating characteristic (ROC) curve was 0.85 (95% CI = 0.82-0.87), indicating a high level of discriminative accuracy in identifying disparate sex crimes committed by the same person. PMID:26402952

  7. Data Exploration Toolkit for serial diffraction experiments

    SciTech Connect

    Zeldin, Oliver B.; Brewster, Aaron S.; Hattne, Johan; Uervirojnangkoorn, Monarin; Lyubimov, Artem Y.; Zhou, Qiangjun; Zhao, Minglei; Weis, William I.; Sauter, Nicholas K.; Brunger, Axel T.

    2015-02-01

    This paper describes a set of tools allowing experimentalists insight into the variation present within large serial data sets. Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the ‘diffraction before destruction’ nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography data sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing.

  8. Breaking the indexing ambiguity in serial crystallography.

    PubMed

    Brehm, Wolfgang; Diederichs, Kay

    2014-01-01

    In serial crystallography, a very incomplete partial data set is obtained from each diffraction experiment (a `snapshot'). In some space groups, an indexing ambiguity exists which requires that the indexing mode of each snapshot needs to be established with respect to a reference data set. In the absence of such re-indexing information, crystallographers have thus far resorted to a straight merging of all snapshots, yielding a perfectly twinned data set of higher symmetry which is poorly suited for structure solution and refinement. Here, two algorithms have been designed for assembling complete data sets by clustering those snapshots that are indexed in the same way, and they have been tested using 15,445 snapshots from photosystem I [Chapman et al. (2011), Nature (London), 470, 73-77] and with noisy model data. The results of the clustering are unambiguous and enabled the construction of complete data sets in the correct space group P63 instead of (twinned) P6322 that researchers have been forced to use previously in such cases of indexing ambiguity. The algorithms thus extend the applicability and reach of serial crystallography.

  9. Galileo - The Serial-Production AIT Challenge

    NASA Technical Reports Server (NTRS)

    Ragnit, Ulrike; Brunner, Otto

    2008-01-01

    The Galileo Project is one of the most demanding projects of ESA, being Europe's autarkic navigation system and a constellation composed of 30 satellites. This presentation points out the different phases of the project up to the full operational capability and the corresponding launch options with respect to launch vehicles as well as launch configurations. One of the biggest challenges is to set up a small serial 'production line' for the overall integration and test campaign of satellites. This production line demands an optimization of all relevant tasks, taking into account also backup and recovery actions. A comprehensive AIT concept is required, reflecting a tightly merged facility layout and work flow design. In addition a common data management system is needed to handle all spacecraft related documentation and to have a direct input-out flow for all activities, phases and positions at the same time. Process optimization is a well known field of engineering in all small high tech production lines, nevertheless serial production of satellites are still not the daily task in space business and therefore new concepts have to be put in place. Therefore, and in order to meet the satellites overall system optimization, a thorough interface between unit/subsystem manufacturing and satellite AIT must be realized to ensure a smooth flow and to avoid any process interruption, which would directly lead to a schedule impact.

  10. [Linkage analysis of serial sex crimes].

    PubMed

    Yokota, Kaeko; Watanabe, Kazumi; Wachi, Taeko; Otsuka, Yusuke; Kuraishi, Hiroki; Fujita, Goro

    2015-08-01

    The purpose of this study was twofold: first, to create an index for a behavioral linkage analysis of serial sex crimes, and second, to construct a predictive model for the analysis. Data on 720 sex crimes (rape, indecent assault) committed by 360 offenders arrested between 1993 and 2005 throughout Japan were collected. The following seven behaviors were examined during a series of analyses aimed at illustrating the effectiveness of crime linkage in serial sex crimes: victim age group, area type, publicness of offense site, weapon, time, contact method, and day of the week. The results indicated that six of the seven behaviors (excluding "day of the week") significantly distinguished between linked and unlinked crime pairs. Under a logistic regression of these six variables, which were dichotomously coded in terms of the concordance or discordance between each pair of incidents, the area under the receiver operating characteristic (ROC) curve was 0.85 (95% CI = 0.82-0.87), indicating a high level of discriminative accuracy in identifying disparate sex crimes committed by the same person.

  11. Serial Cognition and Personality in Macaques

    PubMed Central

    Altschul, Drew M.; Terrace, Herbert S.; Weiss, Alexander

    2016-01-01

    We examined the associations between serial cognition and personality in rhesus macaques (Macaca mulatta). Nine macaques were tested on a simultaneous chaining task to assess their cognitive abilities. They were also rated for personality traits and scored according to a previously extracted six component structure derived from free-ranging rhesus macaques. Friendliness and Openness were positively associated with good performance on three measures of accuracy on the serial learning task: Progress, Error, and Rewarded (i.e., correctly completed) Trials. Faster Reaction Times were associated with lower Friendliness and higher Confidence, as well as higher Openness when only correct responses were analyzed. We also used regularized exploratory factor analysis to extract two, three, four, five, and six factor structures, and found consistent associations between accuracy and single factors within each of these structures. Prior results on intelligence in other nonhuman primate species have focused on basic intelligence tests; this study demonstrates that more complex, abstract cognitive tasks can be used to assess intelligence and personality in nonhuman primates. PMID:27158661

  12. Flux balance analysis accounting for metabolite dilution.

    PubMed

    Benyamini, Tomer; Folger, Ori; Ruppin, Eytan; Shlomi, Tomer

    2010-01-01

    Flux balance analysis is a common method for predicting steady-state flux distributions within metabolic networks, accounting for the growth demand for the synthesis of a predefined set of essential biomass precursors. Ignoring the growth demand for the synthesis of intermediate metabolites required for balancing their dilution leads flux balance analysis to false predictions in some cases. Here, we present metabolite dilution flux balance analysis, which addresses this problem, resulting in improved metabolic phenotype predictions. PMID:20398381

  13. Flux balance analysis accounting for metabolite dilution.

    PubMed

    Benyamini, Tomer; Folger, Ori; Ruppin, Eytan; Shlomi, Tomer

    2010-01-01

    Flux balance analysis is a common method for predicting steady-state flux distributions within metabolic networks, accounting for the growth demand for the synthesis of a predefined set of essential biomass precursors. Ignoring the growth demand for the synthesis of intermediate metabolites required for balancing their dilution leads flux balance analysis to false predictions in some cases. Here, we present metabolite dilution flux balance analysis, which addresses this problem, resulting in improved metabolic phenotype predictions.

  14. Representation of the serial killer on the Italian Internet.

    PubMed

    Villano, P; Bastianoni, P; Melotti, G

    2001-10-01

    The representation of serial killers was examined from the analysis of 317 Web pages in the Italian language to study how the psychological profiles of serial killers are described on the Italian Internet. The correspondence analysis of the content of these Web pages shows that in Italy the serial killer is associated with words such as "monster" and "horror," which suggest and imply psychological perversion and aberrant acts. These traits are peculiar for the Italian scenario.

  15. CAMAC serial highway interface for the LSI-11

    SciTech Connect

    Lau, N.H.

    1980-04-03

    A CAMAC Serial Highway Interface has been designed for the Local Control and Instrumentation System of the Mirror Fusion Test Facility. There are over 50 distinguishable systems in the facility, each of which consists of the LSI-11 computer, fiber optic communication links, and the CAMAC system. The LSI-11 computer includes a 32k memory, serial modem interface and the CAMAC Serial Highway Interface.

  16. Representation of the serial killer on the Italian Internet.

    PubMed

    Villano, P; Bastianoni, P; Melotti, G

    2001-10-01

    The representation of serial killers was examined from the analysis of 317 Web pages in the Italian language to study how the psychological profiles of serial killers are described on the Italian Internet. The correspondence analysis of the content of these Web pages shows that in Italy the serial killer is associated with words such as "monster" and "horror," which suggest and imply psychological perversion and aberrant acts. These traits are peculiar for the Italian scenario. PMID:11783573

  17. Minimal Coital Dilution in Accra, Ghana

    PubMed Central

    Jenness, Samuel M.; Biney, Adriana A. E.; Ampofo, William Kwabena; Dodoo, F. Nii-Amoo; Cassels, Susan

    2015-01-01

    Background Coital dilution, the reduction in the coital frequency per partner when an additional ongoing partner is added, may reduce the transmission potential of partnership concurrency for HIV and other sexually transmitted infections. Empirical estimates of dilution, especially dilution of sexual acts unprotected by condoms, are needed to inform prevention research. Methods Sexually active adults in Accra, Ghana were recruited in a multi-stage household probability sample. Degree (number of ongoing partners), total acts, and unprotected acts were measured retrospectively for each month in the past year through an event-history calendar. Random effects negative binomial models estimated the association between degree and coital frequency. Results Compared to person-months with a single partner (monogamy), 2.06 times as many total acts and 1.94 times as many unprotected acts occurred in months with 2 partners. In months with 3 partners, 2.90 times as many total acts and 2.39 times as many unprotected acts occurred compared to monogamous months. Total acts but not unprotected acts also declined with partnership duration. Conclusions No dilution was observed for total acts with up to three concurrent partners, but a small amount of dilution was observed for unprotected acts for months with multiple concurrencies. This suggests moderate selective condom use in months with multiple concurrencies. The implications of the observed dilution for future HIV transmission must be investigated with mathematical models. PMID:25622062

  18. Gluconeogenesis from labeled carbon: estimating isotope dilution

    SciTech Connect

    Kelleher, J.K.

    1986-03-01

    To estimate the rate of gluconeogenesis from steady-state incorporation of labeled 3-carbon precursors into glucose, isotope dilution must be considered so that the rate of labeling of glucose can be quantitatively converted to the rate of gluconeogenesis. An expression for the value of this isotope dilution can be derived using mathematical techniques and a model of the tricarboxylic acid (TCA) cycle. The present investigation employs a more complex model than that used in previous studies. This model includes the following pathways that may affect the correction for isotope dilution: 1) flux of 3-carbon precursor to the oxaloacetate pool via acetyl-CoA and the TCA cycle; 2) flux of 4- or 5-carbon compounds into the TCA cycle; 3) reversible flux between oxaloacetate (OAA) and pyruvate and between OAA and fumarate; 4) incomplete equilibrium between OAA pools; and 5) isotope dilution of 3-carbon tracers between the experimentally measured pool and the precursor for the TCA-cycle OAA pool. Experimental tests are outlined which investigators can use to determine whether these pathways are significant in a specific steady-state system. The study indicated that flux through these five pathways can significantly affect the correction for isotope dilution. To correct for the effects of these pathways an alternative method for calculating isotope dilution is proposed using citrate to relate the specific activities of acetyl-CoA and OAA.

  19. Malignant sex and aggression: an overview of serial sexual homicide.

    PubMed

    Myers, W C; Reccoppa, L; Burton, K; McElroy, R

    1993-01-01

    Serial murderers have attracted considerable attention in the popular press and criminal justice field, but scientific literature about these individuals is limited. This article provides an overview, from a psychiatric perspective, of serial sexual homicide, one type of serial killing. Characteristics of this type of murder and of these offenders are discussed. Defining qualities and diagnoses applicable to serial sexual killers are reviewed. Various etiologic theories are discussed, with emphasis on the role of fantasy and psychodynamic explanations. Governmental agencies involved in combating this type of crime, along with the role of mental health professionals in criminal profiling, are presented. Finally, the authors explore the reaction of society to this phenomenon.

  20. A psychological profile of a serial killer: a case report.

    PubMed

    Dogra, T D; Leenaars, Antoon A; Chadha, R K; Manju, Mehta; Lalwani, Sanjeev; Sood, Mamta; Lester, David; Raina, Anupuma; Behera, C

    2012-01-01

    Serial killers have always fascinated society. A serial killer is typically defined as a perpetrator who murders three or more people over a period of time. Most reported cases of serial killers come from the United States and Canada. In India, there are few reported cases. We present, to the best of our knowledge, the first Indian case in the literature. The present case is of a 28-year-old man, Surinder Koli. The Department of Forensic Medicine & Toxicology, All India Institute of Medical Sciences, New Delphi handled the forensic study. We present a most unique psychological investigation into the mind of a serial killer.

  1. Malignant sex and aggression: an overview of serial sexual homicide.

    PubMed

    Myers, W C; Reccoppa, L; Burton, K; McElroy, R

    1993-01-01

    Serial murderers have attracted considerable attention in the popular press and criminal justice field, but scientific literature about these individuals is limited. This article provides an overview, from a psychiatric perspective, of serial sexual homicide, one type of serial killing. Characteristics of this type of murder and of these offenders are discussed. Defining qualities and diagnoses applicable to serial sexual killers are reviewed. Various etiologic theories are discussed, with emphasis on the role of fantasy and psychodynamic explanations. Governmental agencies involved in combating this type of crime, along with the role of mental health professionals in criminal profiling, are presented. Finally, the authors explore the reaction of society to this phenomenon. PMID:8054674

  2. A psychological profile of a serial killer: a case report.

    PubMed

    Dogra, T D; Leenaars, Antoon A; Chadha, R K; Manju, Mehta; Lalwani, Sanjeev; Sood, Mamta; Lester, David; Raina, Anupuma; Behera, C

    2012-01-01

    Serial killers have always fascinated society. A serial killer is typically defined as a perpetrator who murders three or more people over a period of time. Most reported cases of serial killers come from the United States and Canada. In India, there are few reported cases. We present, to the best of our knowledge, the first Indian case in the literature. The present case is of a 28-year-old man, Surinder Koli. The Department of Forensic Medicine & Toxicology, All India Institute of Medical Sciences, New Delphi handled the forensic study. We present a most unique psychological investigation into the mind of a serial killer. PMID:23115894

  3. [Accelerated determination of microbial sensitivity to antibiotics and chemotherapeutic preparations by serial dilutions using the peroxidase test].

    PubMed

    Fel'dman, Iu M; Leĭbman, E T

    1980-02-01

    A rapid method for determination of microbial sensitivity to antibiotics and chemotherapeutic drugs with the use of the peroxidase test is described. The procedure takes 6 hours. Peroxidase is determined by a change in the color of the methyl-para-amino phenol sulfate solution added to the broth culture in 6 hours (simultaneously with hydrogen peroxide). The peroxidase test provides detection of the microbe multiplication even when no turbidity is observed.

  4. Data Exploration Toolkit for serial diffraction experiments

    DOE PAGES

    Zeldin, Oliver B.; Brewster, Aaron S.; Hattne, Johan; Uervirojnangkoorn, Monarin; Lyubimov, Artem Y.; Zhou, Qiangjun; Zhao, Minglei; Weis, William I.; Sauter, Nicholas K.; Brunger, Axel T.

    2015-01-23

    Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the 'diffraction before destruction' nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography datamore » sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing.« less

  5. Data Exploration Toolkit for serial diffraction experiments

    PubMed Central

    Zeldin, Oliver B.; Brewster, Aaron S.; Hattne, Johan; Uervirojnangkoorn, Monarin; Lyubimov, Artem Y.; Zhou, Qiangjun; Zhao, Minglei; Weis, William I.; Sauter, Nicholas K.; Brunger, Axel T.

    2015-01-01

    Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the ‘diffraction before destruction’ nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography data sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing. PMID:25664746

  6. Serial murder by children and adolescents.

    PubMed

    Myers, Wade C

    2004-01-01

    Six cases of serial murder by children and adolescents spanning the past 150 years are presented. The available literature pertaining to this area is reviewed. Each of these six offenders committed sexually homicidal behavior as demonstrated by their expression of erotic interest or engagement in overt sexual behavior at the crime scenes. From a DSM-IV-TR perspective they all exhibited signs of sexual sadism, and their crime characteristics reflected behavior of a more predatory than affective nature. Hands on methods of killing were preferred, i.e., cutting, stabbing, or strangulation. These crimes are extremely rare. Case reports in this area are encouraged to advance our knowledge of these youths. PMID:15211557

  7. Serial Endosymbiotic Theory (set): the biosemiotic update.

    PubMed

    Witzany, Günther

    2006-01-01

    The Serial Endosymbiotic Theory explains the origin of nucleated eukaryotic cells by a merging of archaebacterial and eubacterial cells. The paradigmatic change is that the driving force behind evolution is not ramification but merging. Lynn Margulis describes the symbiogenetic processes in the language of mechanistic biology in such terms as "merging", "fusion", and "incorporation". Biosemiotics argues that all cell-cell interactions are (rule-governed) sign-mediated interactions, i.e., communication processes. As the description of plant communication demonstrates, the biosemiotic approach is not limited to the level of molecular biology, but is also helpful in examining all sign-mediated interactions between organisms on the phenotypic level. If biosemiotics also uses the notions of "language" and "communication" to describe non-human sign-mediated interactions, then the underlying scientific justification of such usage should be critically considered. Therefore, I summarize the history of this discussion held between 1920 and 1980 and present its result, the pragmatic turn.

  8. New method of tracing blood hemoglobin concentration to hematocrit ratio for monitoring plasma dilution and osmotic origin shifts in blood.

    PubMed

    Andrijauskas, Audrius; Ivaskevicius, Juozas

    2006-01-01

    Blood hemoglobin concentration and hematocrit are probably the most widely used parameters for outpatient and inpatient examination. In addition to their inherent significance for evaluation of blood viscosity and oxygen carrying capacity, these parameters are traditionally used as tracers of plasma dilution. Blood test derived results are conventionally recorded on multiple pages in patient's medical records making dynamical investigations tedious and time-consuming. In addition, research results describing plasma dilution by means of hemoglobin or hematocrit are presented in a clinically unpractical way. A new method, referred to as HBS Graphics (patent pending--USA serial # 60/712809) is introduced for the first time in this article. This method of evaluation of dynamical hemoglobin concentration, hematocrit and mean corpuscular hemoglobin concentration value deploys interfering parameter shifts for the evaluation of plasma dilution in relation to osmotic dynamics. The HBS Graphics complements two coordinate systems--hemoglobin concentration and hematocrit--with incorporated mean corpuscular hemoglobin concentration value specific trends referred to as radiating lines. Isosmotic plasma dilution and erythrocyte volume shifts follow radiating lines, while osmotic shifts induce intertrend shifts. This article also reviews other methods of tracing plasma dilution by means of blood hemoglobin concentration and hematocrit dynamics.

  9. An alternative approach for quantitative bioanalysis using diluted blood to profile oral exposure of small molecule anticancer drugs in mice.

    PubMed

    Liederer, Bianca M; Berezhkovskiy, Leonid M; Ubhayakar, Savita S; Deng, Yuzhong

    2013-02-01

    A quantitative bioanalytical method for pharmacokinetic studies using diluted whole blood from serially bled mice was developed. Oral exposure profiles in mice for five model anticancer compounds dacarbazine, gefitinib, gemcitabine, imatinib, and topotecan were determined following discrete and cassette (five-in-one) dosing. Six micro blood samples per animal were collected and added to a fixed amount of water. This dilution served several purposes: the red blood cells were lysed; an anticoagulant was unnecessary and the fluid volume of diluted sample was sufficient for bioanalytical assays. AUC values obtained from blood concentrations were within twofold for discrete and cassette dosing except for imatinib (2.1-fold difference) and in agreement with those obtained from plasma concentrations after discrete dosing. All compounds were stable in plasma and diluted blood samples for at least 2 weeks at approximately -80°C. Matrix and intermatrix effects were evaluated to ensure robustness and integrity of the bioanalytical assays. This method provides significant process improvement by enhancing efficiency for sample collection and processing and reducing resources (e.g., reduced compound, cost, and animal requirement) compared with conventional methods. Our study demonstrates the applicability of using diluted micro blood samples for small molecule quantitative bioanalysis to support mouse studies in drug discovery. PMID:23225118

  10. Declining ecosystem health and the dilution effect.

    PubMed

    Khalil, Hussein; Ecke, Frauke; Evander, Magnus; Magnusson, Magnus; Hörnfeldt, Birger

    2016-01-01

    The "dilution effect" implies that where species vary in susceptibility to infection by a pathogen, higher diversity often leads to lower infection prevalence in hosts. For directly transmitted pathogens, non-host species may "dilute" infection directly (1) and indirectly (2). Competitors and predators may (1) alter host behavior to reduce pathogen transmission or (2) reduce host density. In a well-studied system, we tested the dilution of the zoonotic Puumala hantavirus (PUUV) in bank voles (Myodes glareolus) by two competitors and a predator. Our study was based on long-term PUUV infection data (2003-2013) in northern Sweden. The field vole (Microtus agrestis) and the common shrew (Sorex araneus) are bank vole competitors and Tengmalm's owl (Aegolius funereus) is a main predator of bank voles. Infection probability in bank voles decreased when common shrew density increased, suggesting that common shrews reduced PUUV transmission. Field voles suppressed bank vole density in meadows and clear-cuts and indirectly diluted PUUV infection. Further, Tengmalm's owl decline in 1980-2013 may have contributed to higher PUUV infection rates in bank voles in 2003-2013 compared to 1979-1986. Our study provides further evidence for dilution effect and suggests that owls may have an important role in reducing disease risk. PMID:27499001

  11. Price Index for U.S. Serial Services 1991.

    ERIC Educational Resources Information Center

    Shroyer, Andrew

    1991-01-01

    Presents the annual survey of prices for U.S. serial services for 1991 which was compiled in conjunction with the Faxon Company. Comparative data for 1977-91 are included for the areas of business, humanities, law, science and technology, social science, and documents, as well as serial services from the H.W. Wilson Company. (LRW)

  12. Serials Control and Deselection Projects. SPEC Kit 147.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This Systems and Procedures Exchange Center (SPEC) Kit on serials control and deselection projects provides a timely review of the efforts of research libraries to control the increasing costs of serial subscriptions. This kit contains documents from 13 libraries: University of California at Los Angeles and Riverside; Universities of Florida,…

  13. A Management Information System for Serials and Continuations.

    ERIC Educational Resources Information Center

    Olson, Nancy B.; Lester, Daniel W.

    Cutbacks in funding and personnel required the Mankato State College Library to gain more effective control over its serials collection. The task was to integrate the various data, some unrecorded, on standing orders and serials holdings and to produce for the library directors specialized lists of many types: all titles ordered from a specific…

  14. Serial Rapid Naming Skills in Children with Reading Disabilities.

    ERIC Educational Resources Information Center

    Snyder, Lynn S.; Downey, Doris M.

    1995-01-01

    This study found that 30 children with reading disability (RD) performed more poorly than 30 children with normal reading achievement on tasks of serial rapid naming, verbal fluency, letter-based word retrieval, and articulatory speed. RD children had significantly longer reaction times and production durations on the serial naming task. Findings…

  15. Speech and Language Processing Mechanisms in Verbal Serial Recall

    ERIC Educational Resources Information Center

    Allen, Richard; Hulme, Charles

    2006-01-01

    We report two experiments examining the role of concreteness and word phonological neighborhood characteristics on immediate serial recall. In line with previous findings concreteness, word frequency, and larger neighborhood size are associated with better serial recall. Both concreteness and word neighborhood size were also positively associated…

  16. Infants' Memory Processing of a Serial List: List Length Effects.

    ERIC Educational Resources Information Center

    Gulya, Michele; Sweeney, Becky; Rovee-Collier, Carolyn

    1999-01-01

    Three experiments demonstrated that increasing the length of a mobile serial list impaired 6-month olds' memory for serial order. Findings indicated that the primacy effect was absent on a 24-hour delayed recognition test and was exhibited on a reactivation test, adding to growing evidence that young infants possess two functionally distinct…

  17. List Onset and Isolation in Continuous Serial Learning

    ERIC Educational Resources Information Center

    Lippman, Louis G.

    1974-01-01

    This experiment attempted to obtain an estimate of perceptual isolation effects when the isolated item was the only distinctive feature in the list and to obtain data on continuous serial learning in order that isolation and serial-position effects could be compared directly. (Author/RK)

  18. Listening to French and the Serial Position Effect.

    ERIC Educational Resources Information Center

    Garrott, Carl L.

    This study sought to determine the extent of the serial position effect in listening to French and to specify the relationship between problem areas in listening to French and the position effect. The study addressed three hypotheses relative to the serial position effect and listening to French: (1) Was there a significant difference between the…

  19. Forgetting in Immediate Serial Recall: Decay, Temporal Distinctiveness, or Interference?

    ERIC Educational Resources Information Center

    Oberauer, Klaus; Lewandowsky, Stephan

    2008-01-01

    Three hypotheses of forgetting from immediate memory were tested: time-based decay, decreasing temporal distinctiveness, and interference. The hypotheses were represented by 3 models of serial recall: the primacy model, the SIMPLE (scale-independent memory, perception, and learning) model, and the SOB (serial order in a box) model, respectively.…

  20. Serials Information on CD-ROM: A Reference Perspective.

    ERIC Educational Resources Information Center

    Karch, Linda S.

    1990-01-01

    Describes Ulrich's PLUS (a CD-ROM version of Ulrich's serials directories) and EBSCO's CD-ROM version of "The Serials Directory," and compares the two in terms of their use as reference tools. Areas discussed include database content, user aids, system features, search features, and a comparison of search results. Equipment requirements for both…

  1. Indexing Serialized Fiction: May the Force Be with You.

    ERIC Educational Resources Information Center

    Barr, Melissa M.

    The adult novel offers indexers an unusual opportunity to create a serialized fiction index. This research paper involved designing and creating a Character Index, Thesaurus, Glossary, and Abstract (with descriptors) for 21 novels based on the "Star Wars" movies. The novels are an unusual example of serialized fiction featuring main characters,…

  2. Antisocial personality disorder, sexual sadism, malignant narcissism, and serial murder.

    PubMed

    Geberth, V J; Turco, R N

    1997-01-01

    This paper examines the research on serial murder and its relationship to antisocial personality disorder and sexual sadism. The concept of malignant narcissism is also discussed. Case studies of serial killers are examined regarding the nature of sexual violation and crime scene behavior.

  3. Serial Magnetization Transfer Imaging in Acute Optic Neuritis

    ERIC Educational Resources Information Center

    Hickman, S. J.; Toosy, A. T.; Jones, S. J.; Altmann, D. R.; Miszkiel, K. A.; MacManus, D. G.; Barker, G. J.; Plant, G. T.; Thompson, A. J.; Miller, D.H.

    2004-01-01

    In serial studies of multiple sclerosis lesions, reductions in magnetization transfer ratio (MTR) are thought to be due to demyelination and axonal loss, with later rises due to remyelination. This study followed serial changes in MTR in acute optic neuritis in combination with clinical and electrophysiological measurements to determine if the MTR…

  4. Retrospective Revaluation Effects Following Serial Compound Training and Target Extinction

    ERIC Educational Resources Information Center

    Effting, Marieke; Vervliet, Bram; Kindt, Merel

    2010-01-01

    Using a conditioned suppression task, two experiments examined retrospective revaluation effects after serial compound training in a release from overshadowing design. In Experiment 1, serial X [right arrow] A+ training produced suppression to target A, which was enhanced when preceded by feature X, whereas X by itself elicited no suppression.…

  5. Antisocial personality disorder, sexual sadism, malignant narcissism, and serial murder.

    PubMed

    Geberth, V J; Turco, R N

    1997-01-01

    This paper examines the research on serial murder and its relationship to antisocial personality disorder and sexual sadism. The concept of malignant narcissism is also discussed. Case studies of serial killers are examined regarding the nature of sexual violation and crime scene behavior. PMID:8988574

  6. The Effect of Concurrent Semantic Categorization on Delayed Serial Recall

    ERIC Educational Resources Information Center

    Acheson, Daniel J.; MacDonald, Maryellen C.; Postle, Bradley R.

    2011-01-01

    The influence of semantic processing on the serial ordering of items in short-term memory was explored using a novel dual-task paradigm. Participants engaged in 2 picture-judgment tasks while simultaneously performing delayed serial recall. List material varied in the presence of phonological overlap (Experiments 1 and 2) and in semantic content…

  7. Using a Text-Processing Language for Serial Record Conversion.

    ERIC Educational Resources Information Center

    Lowrey, James R.; Hardiman, Paul V.

    1985-01-01

    Describes the automation of the machine-readable library serials file at Golda Meir Library, University of Wisconsin-Milwaukee. Highlights include purchase of the PERLINE/BOOKLINE system including a MARC interface module called MICA, five main aspects of the problem posed by the library serials conversion project, and use of the text-processing…

  8. Multiple Serial List Learning with Two Mnemonic Techniques.

    ERIC Educational Resources Information Center

    Marston, Paul T.; Young, Robert K.

    The classic mnemonic for learning serial lists, the method of loci, and its modern counterpart, the peg system, were compared by having subjects learn three 20-item serial lists. In addition to the type of mnemonic training, list imagery was either high (rated 6-7) or medium (rated 4-5), and instructions were either progressive elaboration (e.g.,…

  9. Union List Development: Control of the Serial Literature *

    PubMed Central

    Sawyers, Elizabeth J.

    1972-01-01

    The discussion covers the development of a national union list or finding tool for biomedical serial holdings and its integration into the National Serials Data Program, which is being developed under the auspices of the three National Libraries. Specific topics which are covered include: (1) Selection of the Union Catalog of Medical Periodicals (UCMP) as the basis for a biomedical list and the status of that activity; (2) discussion of the various methods of recording holdings; (3) status of the National Serials Data Program and a discussion of its relationship to the UCMP file; and (4) status of the Standard Serial Number and its relationship to other existing coding schemes for serial titles. PMID:5054307

  10. Automatic dilution gaging of rapidly varying flow

    USGS Publications Warehouse

    Duerk, M.D.

    1983-01-01

    The analysis showed that the discharges measured by dye-dilution techniques were generally within ± 10 percent of the discharges determined from ratings established by current-meter measurements. Larger differences were noted at the start of and on the rising limb of four hydrographs. Of the 20 storms monitored, dilution measurements on 17 were of acceptable accuracy. Peak discharges from the open-channel site ranged from 0 to 12 percent departures from the existing rating whereas the comparison of peak discharge at the storm sewer site ranged from 0 to 5 percent departures from the existing rating.

  11. Diluted magnetic semiconductor nanowires exhibiting magnetoresistance

    DOEpatents

    Yang, Peidong; Choi, Heonjin; Lee, Sangkwon; He, Rongrui; Zhang, Yanfeng; Kuykendal, Tevye; Pauzauskie, Peter

    2011-08-23

    A method for is disclosed for fabricating diluted magnetic semiconductor (DMS) nanowires by providing a catalyst-coated substrate and subjecting at least a portion of the substrate to a semiconductor, and dopant via chloride-based vapor transport to synthesize the nanowires. Using this novel chloride-based chemical vapor transport process, single crystalline diluted magnetic semiconductor nanowires Ga.sub.1-xMn.sub.xN (x=0.07) were synthesized. The nanowires, which have diameters of .about.10 nm to 100 nm and lengths of up to tens of micrometers, show ferromagnetism with Curie temperature above room temperature, and magnetoresistance up to 250 Kelvin.

  12. Conversion of the Minnesota Union List of Serials (MULS) To National Serials Data Program (NSDP) Requirements: A Proposal. Final Report.

    ERIC Educational Resources Information Center

    Grosch, Audrey N., Comp.

    The methodologies and costs of converting the Minnesota Union List of Serials (MULS) to the National Serials Data Program (NSDP) requirements are outlined in this document. The conversion is considered under four logical areas: 1) providing quantitative estimates of the amount of computer analysis and programing manpower required to perform a…

  13. Impact of dilution on microbial community structure and functional potential: comparison of numerical simulations and batch culture experiments

    NASA Technical Reports Server (NTRS)

    Franklin, R. B.; Garland, J. L.; Bolster, C. H.; Mills, A. L.

    2001-01-01

    A series of microcosm experiments was performed using serial dilutions of a sewage microbial community to inoculate a set of batch cultures in sterile sewage. After inoculation, the dilution-defined communities were allowed to regrow for several days and a number of community attributes were measured in the regrown assemblages. Based upon a set of numerical simulations, community structure was expected to differ along the dilution gradient; the greatest differences in structure were anticipated between the undiluted-low-dilution communities and the communities regrown from the very dilute (more than 10(-4)) inocula. Furthermore, some differences were expected among the lower-dilution treatments (e.g., between undiluted and 10(-1)) depending upon the evenness of the original community. In general, each of the procedures used to examine the experimental community structures separated the communities into at least two, often three, distinct groups. The groupings were consistent with the simulated dilution of a mixture of organisms with a very uneven distribution. Significant differences in community structure were detected with genetic (amplified fragment length polymorphism and terminal restriction fragment length polymorphism), physiological (community level physiological profiling), and culture-based (colony morphology on R2A agar) measurements. Along with differences in community structure, differences in community size (acridine orange direct counting), composition (ratio of sewage medium counts to R2A counts, monitoring of each colony morphology across the treatments), and metabolic redundancy (i.e., generalist versus specialist) were also observed, suggesting that the differences in structure and diversity of communities maintained in the same environment can be manifested as differences in community organization and function.

  14. The Impact of International Standardization on the Rules of Entry for Serials

    ERIC Educational Resources Information Center

    Cannan, Judith Proctor

    1975-01-01

    The major provisions of the International Serials Data System and International Standard Bibliographic Description for Serials are presented and related to present rules of entry for serials as detailed in the Anglo-American Cataloging Rules. (Author)

  15. Passive serialization in a multitasking environment

    SciTech Connect

    Hennessey, J.P.; Osisek, D.L.; Seigh, J.W. II

    1989-02-28

    In a multiprocessing system having a control program in which data objects are shared among processes, this patent describes a method for serializing references to a data object by the processes so as to prevent invalid references to the data object by any process when an operation requiring exclusive access is performed by another process, comprising the steps of: permitting the processes to reference data objects on a shared access basis without obtaining a shared lock; monitoring a point of execution of the control program which is common to all processes in the system, which occurs regularly in the process' execution and across which no references to any data object can be maintained by any process, except references using locks; establishing a system reference point which occurs after each process in the system has passed the point of execution at least once since the last such system reference point; requesting an operation requiring exclusive access on a selected data object; preventing subsequent references by other processes to the selected data object; waiting until two of the system references points have occurred; and then performing the requested operation.

  16. Switch for serial or parallel communication networks

    DOEpatents

    Crosette, Dario B.

    1994-01-01

    A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination.

  17. Task based synthesis of serial manipulators

    PubMed Central

    Patel, Sarosh; Sobh, Tarek

    2015-01-01

    Computing the optimal geometric structure of manipulators is one of the most intricate problems in contemporary robot kinematics. Robotic manipulators are designed and built to perform certain predetermined tasks. There is a very close relationship between the structure of the manipulator and its kinematic performance. It is therefore important to incorporate such task requirements during the design and synthesis of the robotic manipulators. Such task requirements and performance constraints can be specified in terms of the required end-effector positions, orientations and velocities along the task trajectory. In this work, we present a comprehensive method to develop the optimal geometric structure (DH parameters) of a non-redundant six degree of freedom serial manipulator from task descriptions. In this work we define, develop and test a methodology to design optimal manipulator configurations based on task descriptions. This methodology is devised to investigate all possible manipulator configurations that can satisfy the task performance requirements under imposed joint constraints. Out of all the possible structures, the structures that can reach all the task points with the required orientations are selected. Next, these candidate structures are tested to see whether they can attain end-effector velocities in arbitrary directions within the user defined joint constraints, so that they can deliver the best kinematic performance. Additionally least power consuming configurations are also identified. PMID:26257946

  18. Serial pattern learning during skilled walking.

    PubMed

    Wallace, Douglas G; Winter, Shawn S; Metz, Gerlinde A

    2012-03-01

    Rats possess a rich repertoire of sequentially organized, natural behaviors. It is possible that these natural behaviors may reflect implicit learning or relatively fixed movement patterns. The present study was conducted to determine whether factors known to influence implicit learning produce similar effects on the acquisition of skilled walking. Three groups of rats were trained to cross a horizontal ladder with rungs spaced according to three different levels of complexity. All training and testing were performed under dark conditions to assess the influence of non-visual modalities on skilled walking. Although all groups' performance improved throughout training, pattern complexity influenced the rate of improvement. In addition, performance during a probe session provided further evidence that each group encoded the rung spacing pattern experienced during training to create an internal representation. These observations demonstrate that the engram established during repetitive training represents either the temporal or spatial characteristics of rung spacing. These findings indicate that implicit learning contributes to the acquisition of natural sequential behaviors. Furthermore, serial pattern learning of rung spacing provides a novel task to determine sensory and motor contributions to the consolidation of skilled movement. PMID:22744781

  19. Serial femtosecond crystallography: the first five years

    PubMed Central

    Schlichting, Ilme

    2015-01-01

    Protein crystallography using synchrotron radiation sources has had a tremendous impact on biology, having yielded the structures of thousands of proteins and given detailed insight into their mechanisms. However, the technique is limited by the requirement for macroscopic crystals, which can be difficult to obtain, as well as by the often severe radiation damage caused in diffraction experiments, in particular when using tiny crystals. To slow radiation damage, data collection is typically performed at cryogenic temperatures. With the advent of free-electron lasers (FELs) capable of delivering extremely intense femtosecond X-ray pulses, this situation appears to be remedied, allowing the structure determination of undamaged macromolecules using either macroscopic or microscopic crystals. The latter are exposed to the FEL beam in random orientations and their diffraction data are collected at cryogenic or room temperature in a serial fashion, since each crystal is destroyed upon a single exposure. The new approaches required for crystal growth and delivery, and for diffraction data analysis, including de novo phasing, are reviewed. The opportunities and challenges of SFX are described, including applications such as time-resolved measurements and the analysis of radiation damage-prone systems. PMID:25866661

  20. Switch for serial or parallel communication networks

    DOEpatents

    Crosette, D.B.

    1994-07-19

    A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination. 9 figs.

  1. Declining ecosystem health and the dilution effect

    PubMed Central

    Khalil, Hussein; Ecke, Frauke; Evander, Magnus; Magnusson, Magnus; Hörnfeldt, Birger

    2016-01-01

    The “dilution effect” implies that where species vary in susceptibility to infection by a pathogen, higher diversity often leads to lower infection prevalence in hosts. For directly transmitted pathogens, non-host species may “dilute” infection directly (1) and indirectly (2). Competitors and predators may (1) alter host behavior to reduce pathogen transmission or (2) reduce host density. In a well-studied system, we tested the dilution of the zoonotic Puumala hantavirus (PUUV) in bank voles (Myodes glareolus) by two competitors and a predator. Our study was based on long-term PUUV infection data (2003–2013) in northern Sweden. The field vole (Microtus agrestis) and the common shrew (Sorex araneus) are bank vole competitors and Tengmalm’s owl (Aegolius funereus) is a main predator of bank voles. Infection probability in bank voles decreased when common shrew density increased, suggesting that common shrews reduced PUUV transmission. Field voles suppressed bank vole density in meadows and clear-cuts and indirectly diluted PUUV infection. Further, Tengmalm’s owl decline in 1980–2013 may have contributed to higher PUUV infection rates in bank voles in 2003–2013 compared to 1979–1986. Our study provides further evidence for dilution effect and suggests that owls may have an important role in reducing disease risk. PMID:27499001

  2. Osmosis is not driven by water dilution.

    PubMed

    Kramer, Eric M; Myers, David R

    2013-04-01

    There is a misconception among plant scientists that osmosis is driven by the tendency of solutes to dilute water. In this opinion article, we discuss the quantitative and qualitative failures of this view, and go on to review the correct kinetic picture of osmosis as it appears in physics textbooks.

  3. Sulfuric Acid and Water: Paradoxes of Dilution

    ERIC Educational Resources Information Center

    Leenson, I. A.

    2004-01-01

    On equilibrium properties of aqueous solutions of sulfuric acid, Julius Thomsen has marked that the heat evolved on diluting liquid sulfuric acid with water is a continuous function of the water used, and excluded absolutely the acceptance of definite hydrates as existing in the solution. Information about thermochemical measurement, a discussion…

  4. Infants' memory processing of a serial list: list length effects.

    PubMed

    Gulya, M; Sweeney, B; Rovee-Collier, C

    1999-05-01

    Six-month-olds, trained with a three-mobile serial list, exhibit a primacy effect 24 h later. In three experiments, we demonstrated that increasing list length impairs their memory for serial order. In all experiments, 6-month-olds were trained with a five-mobile list. In Experiment 1, infants failed to exhibit a primacy effect on a 24-h delayed recognition test, recognizing mobiles from all serial positions. In Experiment 2, infants did exhibit a primacy effect on a reactivation (priming) test, suggesting that they may originally have encoded serial-order information. Experiment 3 confirmed that serial-order information was represented in infants' training memory. After the reactivation treatment, infants were precued with one list member and tested for recognition of another. When precues specified valid order information, infants recognized test mobiles from the later serial positions. The memory dissociation for serial order on delayed recognition and reactivation tests adds to the growing evidence that young infants possess two functionally distinct memory systems.

  5. Charge-coupled-device parallel-to-serial converter

    NASA Technical Reports Server (NTRS)

    Tower, John R. (Inventor)

    1987-01-01

    A CCD parallel-to-serial converter comprising two successions of charge transfer stages, recurrently side-loaded with respective ones of parallelly supplied charge packets, then serially unloaded by time-interleaved respective shift register operations. The charge packets converted to time-division-multiplexed serial form are supplied to a shared electrometer, and the electrometer response is de-multiplexed. Preferably, shift register operations are carried forward concurrently at the same rate, but with the final charge transfer stages clocked in phases staggered in time.

  6. Evaluation of a diet dilution technique for measuring the response of broiler chickens to increasing concentrations of lysine.

    PubMed

    Gous, R M; Morris, T R

    1985-04-01

    Three experiments were conducted on male broiler chickens between one and three weeks of age to determine their response to dietary lysine concentrations. Serial dilutions of a summit diet shown to be first-limiting in lysine were fed in all experiments. The balance between amino acids in these diets was maintained within narrow limits. Intake of the most-limiting amino acid was the most important factor determining growth rate; protein intake as such was of little or no importance. The efficiency of utilisation of dietary lysine for protein growth was calculated to be 65.05 mg/g protein gain, representing a net efficiency of 0.85. The diet dilution technique overcomes the major disadvantage of the graded supplementation method for determining the requirements of amino acids, namely that of the amino acid balance changing systematically in successive dietary treatments.

  7. Automatic registration of serial mammary gland sections

    SciTech Connect

    Arganda-Carreras, Ignacio; Fernandez-Gonzalez, Rodrigo; Ortiz-de-Solorzano, Carlos

    2004-04-13

    We present two new methods for automatic registration of microscope images of consecutive tissue sections. They represent two possibilities for the first step in the 3-D reconstruction of histological structures from serially sectioned tissue blocks. The goal is to accurately align the sections in order to place every relevant shape contained in each image in front of its corresponding shape in the following section before detecting the structures of interest and rendering them in 3D. This is accomplished by finding the best rigid body transformation (translation and rotation) of the image being registered by maximizing a matching function based on the image content correlation. The first method makes use of the entire image information, whereas the second one uses only the information located at specific sites, as determined by the segmentation of the most relevant tissue structures. To reduce computing time, we use a multiresolution pyramidal approach that reaches the best registration transformation in increasing resolution steps. In each step, a subsampled version of the images is used. Both methods rely on a binary image which is a thresholded version of the Sobel gradients of the image (first method) or a set of boundaries manually or automatically obtained that define important histological structures of the sections. Then distance-transform of the binary image is computed. A proximity function is then calculated between the distance image of the image being registered and that of the reference image. The transformation providing a maximum of the proximity function is then used as the starting point of the following step. This is iterated until the registration error lies below a minimum value.

  8. Serial Position and Isolation Effects in a Classroom Lecture Simulation

    ERIC Educational Resources Information Center

    Holen, Michael C.; Oaster, Thomas R.

    1976-01-01

    Provides evidence of the existence of serial position and isolation effects in a classroom lecture simulation involving extended meaningful discourse. Isolating an item facilitated learning of that item. (Author/DEP)

  9. An isolation effect in serial memory for spatial information.

    PubMed

    Guérard, Katherine; Hughes, Robert W; Tremblay, Sébastien

    2008-05-01

    This paper reports the first demonstration of an isolation effect or von Restorff effect (von Restorff, 1933) in the context of a spatial-memory task: Short-term serial recall was enhanced for both the location and the serial position of one red dot presented amongst a sequence of otherwise black dots. When the serial position of the isolate was fixed, the spatial isolation effect only emerged when participants received a control block of trials before the block of isolation trials (Experiment 1). However, when the serial position of the isolate was varied across isolation trials, an isolation effect was still produced regardless of condition order (Experiment 2). It is suggested that both temporal grouping strategies and greater item-specific processing may have contributed to the enhanced retention of the isolate.

  10. Pauses and durations exhibit a serial position effect.

    PubMed

    Haberlandt, Karl; Lawrence, Holly; Krohn, Talia; Bower, Katherine; Thomas, J Graham

    2005-02-01

    This article reports evidence of two kinds of serial position effects in immediate serial recall: One involves interresponse pauses, and the other response durations. In forward and backward recall, responding was faster at initial and final positions than at center positions, exhibitinga bow-shaped function relative to serial position. These data were obtained in a spoken recall study in which ungrouped lists of four to six words and postcuing of recall direction were used. The pause pattern is consistent with several models of serial memory, including a distinctiveness model (Brown, Neath, & Chater, 2002) and a version of the ACT-R model augmented with a spontaneous grouping strategy (Maybery, Parmentier, & Jones, 2002). The duration pattern suggests that response articulation depends on the processing context, rather than being modular.

  11. Within-List Serial Position Effects in Free Recall

    ERIC Educational Resources Information Center

    Gorfein, David S.; And Others

    1976-01-01

    The present article reports six studies that both extend the range of conditions that produce within-list serial position effects and attempt to unravel three possible theoretical explanations for these functions. (Editor)

  12. Fast Grasp Contact Computation for a Serial Robot

    NASA Technical Reports Server (NTRS)

    Shi, Jianying (Inventor); Hargrave, Brian (Inventor); Diftler, Myron A. (Inventor)

    2015-01-01

    A system includes a controller and a serial robot having links that are interconnected by a joint, wherein the robot can grasp a three-dimensional (3D) object in response to a commanded grasp pose. The controller receives input information, including the commanded grasp pose, a first set of information describing the kinematics of the robot, and a second set of information describing the position of the object to be grasped. The controller also calculates, in a two-dimensional (2D) plane, a set of contact points between the serial robot and a surface of the 3D object needed for the serial robot to achieve the commanded grasp pose. A required joint angle is then calculated in the 2D plane between the pair of links using the set of contact points. A control action is then executed with respect to the motion of the serial robot using the required joint angle.

  13. Effect of serial extraction alone on crowding: spontaneous changes in dentition after serial extraction.

    PubMed

    Yoshihara, T; Matsumoto, Y; Suzuki, J; Sato, N; Oguchi, H

    2000-12-01

    We examined changes in dentition after serial extraction in subjects who wore no appliances to determine the relationships between changes in dentition and improvement in dental crowding. Mandibular dental casts and lateral cephalograms from 31 subjects who had undergone serial extraction without orthodontic treatment were analyzed at 3 stages: before extraction of the deciduous canines (T1), after extraction of first premolars (T2), and at the end of the observation period (T3). Although movements of the first molar cusp and apex from T2 to T3 were significantly greater than from T1 to T2, movements of the incisor cusp and apex from T1 to T2 were significantly greater than from T2 to T3. The first molar tipped mesially from T1 to T2 but tipped distally from T2 to T3. The distal tipping of the incisor from T1 to T2 was significantly greater than from T2 to T3. These results suggest that the main changes in dentition from T1 to T2 are different from those from T2 to T3. The correlations between the annual change in the canine movement or tipping from T2 to T3 and the annual change in the irregularity index at the same time were significant. These results suggest that the canine movement or tipping contributed to the correction of the anterior crowding from T2 to T3.

  14. Butterfly eyespot serial homology: enter the Hox genes.

    PubMed

    Hombría, James Castelli-Gair

    2011-01-01

    Hox genes modify serial homology patterns in many organisms, exemplified in vertebrates by modification of the axial skeleton and in arthropods by diversification of the body segments. Butterfly wing eyespots also appear in a serial homologous pattern that, in certain species, is subject to local modification. A paper in EvoDevo reports the Hox gene Antp is the earliest known gene to have eyespot-specific expression; however, not all Lepidoptera express Antp in eyespots, suggesting some developmental flexibility. PMID:21527048

  15. [A serial killer as exemplified by T. R. Bundy].

    PubMed

    Gałeska-Sliwka, Anita

    2008-01-01

    The question of serial homicides and their perpetrators poses a considerable problem of both a definitional and practical nature. T R. Bundy is the first perpetrator who was officially termed a "serial killer". Since that time, this concept has been commonly used and sometimes even overused, e.g. in reference to mass murderers. However, the definitions established for Bundy's case have been preserved and continue to be used in practice.

  16. Butterfly eyespot serial homology: enter the Hox genes.

    PubMed

    Hombría, James Castelli-Gair

    2011-01-01

    Hox genes modify serial homology patterns in many organisms, exemplified in vertebrates by modification of the axial skeleton and in arthropods by diversification of the body segments. Butterfly wing eyespots also appear in a serial homologous pattern that, in certain species, is subject to local modification. A paper in EvoDevo reports the Hox gene Antp is the earliest known gene to have eyespot-specific expression; however, not all Lepidoptera express Antp in eyespots, suggesting some developmental flexibility.

  17. Recombinant nucleocapsid protein based single serum dilution ELISA for the detection of antibodies to infectious bronchitis virus in poultry.

    PubMed

    Pradhan, Sunil K; Kamble, Nitin M; Pillai, Aravind S; Gaikwad, Satish S; Khulape, Sagar A; Reddy, M R; Mohan, C Madhan; Kataria, Jag Mohan; Dey, Sohini

    2014-12-01

    Avian infectious bronchitis is ubiquitous and highly contagious disease of poultry, with profound effect on commercial poultry production. For effective control of infectious bronchitis virus (IBV), quick and specific diagnosis is of utmost importance. In this study, the virus was isolated from clinical samples from India and the full length nucleocapsid (N) gene was amplified, cloned and expressed in a prokaryotic system. The purified recombinant N protein based single serum dilution enzyme linked immunosorbent assay (ELISA) was developed for IBV to measure specific antibody in the sera of chickens. A total of 310 chicken sera samples were tested using the commercial IDEXX kit along with the assay developed. A linear correlation was obtained between predicted antibody titres at a single working dilution of 1:100 and the corresponding serum titres observed as determined by the standard serial dilution method. Regression analysis was used to construct a standard curve from which an equation was derived which confirmed their correlation. The developed equation was then used to extrapolate predicated ELISA antibody titer from corrected absorbance readings of the single working dilution. The assay proved to be specific (95.8%) and sensitive (96.8%) when compared to the commercial IDEXX ELISA test.

  18. Kinetic model for dilute traffic flow

    NASA Astrophysics Data System (ADS)

    Balouchi, Ashkan; Browne, Dana A.

    The flow of traffic represents a many-particle non-equilibrium problem with important practical consequences. Traffic behavior has been studied using a variety of approaches, including fluid dynamics models, Boltzmann equation, and recently cellular automata (CA). The CA model for traffic flow that Nagel and Schreckenberg (NS) introduced can successfully mimic many of the known features of the traffic flow. We show that in the dilute limit of the NS model, where vehicles exhibit free flow, cars show significant nearest neighbor correlation primarily via a short-range repulsion. introduce an approximate analytic model to describe this dilute limit. We show that the distribution of the distance between consecutive vehicles obeys a drift-diffusion equation. We compared this model with direct simulations. The steady state solution and relaxation of this model agrees well with direct simulations. We explore how this model breaks down as the transition to jams occurs.

  19. Dilution jet mixing program, supplementary report

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; White, C.

    1986-01-01

    The velocity and temperature distributions predicted by a 3-D numerical model and experimental measurements are compared. Empirical correlations for the jet velocity trajectory developed are presented. The measured velocity distributions for all test cases of phase through phase 3 are presented in the form of contour and oblique plots. quantification of the effects of the following on the jet mixing characteristics with a confined crossflow are: (1) orifice geometry momentum flux ratio and density ratio; (2) nonuniform mainstream temperature and velocity profiles upstream of dilution orifices; (3) cold versus hot jet injection; (4) cross-stream flow are a convergence as encountered in practical dilution zone geometries; (5) 2-D slot versus circular orifices; (6) discrete noncirculcer orifices; (7) single-sided versus opposed jets; (8) single row of jets.

  20. Serial reversal learning of position discrimination in developing rats.

    PubMed

    Watson, Deborah J; Sullivan, Jesse R; Frank, Julie G; Stanton, Mark E

    2006-01-01

    The current study established a procedure to evaluate the capability of rats on postnatal days (PND) 21, 26, and 30 to perform a spatial serial reversal task using a T-maze. Training consisted of an acquisition session followed by a series of six reversal sessions. To examine the role of proactive interference in the serial reversal effect, the point of reversal was manipulated so that it occurred at the start of each session (between-sessions) or the midpoint of each session (within-sessions). Performance was initially impaired during the first reversal but improved dramatically across the series. Reversal between-sessions enhanced this serial reversal effect in comparison to reversal within-sessions. Experiment 1 showed that rats of all ages learned the between-sessions serial reversal task at a comparable rate. However, on the within-sessions task, PND21 rats were impaired relative to the PND26 and 30 rats, which did not differ. Experiment 2 revealed that the addition of a tactile cue that is correlated with each phase of reversal eliminated age and task differences in serial reversal performance. These findings suggest that higher-order cognitive processes underlying serial reversal are present during the weanling period, but there is some improvement with age under conditions involving high memory interference and/or difficulty in detecting the transition between reversal phases.

  1. Three more semantic serial position functions and a SIMPLE explanation.

    PubMed

    Kelley, Matthew R; Neath, Ian; Surprenant, Aimée M

    2013-05-01

    There are innumerable demonstrations of serial position functions-with characteristic primacy and recency effects-in episodic tasks, but there are only a handful of such demonstrations in semantic memory tasks, and those demonstrations have used only two types of stimuli. Here, we provide three more examples of serial position functions when recalling from semantic memory. Participants were asked to reconstruct the order of (1) two cartoon theme song lyrics, (2) the seven Harry Potter books, and (3) two sets of movies, and all three demonstrations yielded conventional-looking serial position functions with primacy and recency effects. The data were well-fit by SIMPLE, a local distinctiveness model of memory that was originally designed to account for serial position effects in short- and long-term episodic memory. According to SIMPLE, serial position functions in both episodic and semantic memory tasks arise from the same type of processing: Items that are more separated from their close neighbors in psychological space at the time of recall will be better remembered. We argue that currently available evidence suggests that serial position functions observed when recalling items that are presumably in semantic memory arise because of the same processes as those observed when recalling items that are presumably in episodic memory.

  2. Development of serial processing in reading and rapid naming.

    PubMed

    Protopapas, Athanassios; Altani, Angeliki; Georgiou, George K

    2013-12-01

    Serial rapid automatized naming (RAN) is more strongly related to reading fluency than naming of isolated words, suggesting that the implementation of serial processing may underlie the RAN-reading relationship. In this study, 107 Greek children from Grade 2 and 107 from Grade 6 were tested with discrete and serial naming of digits, objects, and words in 50-item arrays. The correlation between discrete and serial word reading was very high in Grade 2 but only moderate in Grade 6. In confirmatory factor analysis, a reading-naming latent structure fit the Grade 2 data best; in contrast, a serial-discrete structure fit the Grade 6 data. Thus, the superficial longitudinal stability of RAN-reading correlations belies vastly different patterns of interrelations, indicative of changes in the developing cognitive processes underlying both naming and reading. Word fluency tasks in Grade 2 are apparently accomplished largely as a series of isolated individual word naming trials even though multiple individual letters in each word may be processed in parallel. In contrast, specifically serial procedures are applied in Grade 6, presumably via simultaneous processing of multiple individual words at successive levels. It is proposed that this feat requires endogenous control of cognitive cascades.

  3. Serial CSTR digester configuration for improving biogas production from manure.

    PubMed

    Boe, Kanokwan; Angelidaki, Irini

    2009-01-01

    A new configuration of manure digesters for improving biogas production has been investigated in laboratory scale. A single thermophilic continuous-flow stirred tank reactor (CSTR) operated with a hydraulic retention time (HRT) of 15 days was compared to a serial CSTR configuration with volume distribution ratio of 80/20 and 90/10, and total HRT of 15 days. The results showed that the serial CSTR could obtain 11% higher biogas yield compared to the single CSTR. The increased biogas yield in the serial CSTR was mainly from the second reactor, which accounted for 16% and 12% of total biogas yield in the 90/10 and 80/20 configuration, respectively. VFA concentration in the serial CSTR was high in the first reactor but very low in the second reactor. The results from organic pulse load test showed that the second reactor in serial CSTR helped utilizing VFA produced from overloading in the first reactor, which improved the effluent quality and conversion efficiency of the serial CSTR.

  4. Development of serial processing in reading and rapid naming.

    PubMed

    Protopapas, Athanassios; Altani, Angeliki; Georgiou, George K

    2013-12-01

    Serial rapid automatized naming (RAN) is more strongly related to reading fluency than naming of isolated words, suggesting that the implementation of serial processing may underlie the RAN-reading relationship. In this study, 107 Greek children from Grade 2 and 107 from Grade 6 were tested with discrete and serial naming of digits, objects, and words in 50-item arrays. The correlation between discrete and serial word reading was very high in Grade 2 but only moderate in Grade 6. In confirmatory factor analysis, a reading-naming latent structure fit the Grade 2 data best; in contrast, a serial-discrete structure fit the Grade 6 data. Thus, the superficial longitudinal stability of RAN-reading correlations belies vastly different patterns of interrelations, indicative of changes in the developing cognitive processes underlying both naming and reading. Word fluency tasks in Grade 2 are apparently accomplished largely as a series of isolated individual word naming trials even though multiple individual letters in each word may be processed in parallel. In contrast, specifically serial procedures are applied in Grade 6, presumably via simultaneous processing of multiple individual words at successive levels. It is proposed that this feat requires endogenous control of cognitive cascades. PMID:24077466

  5. Three more semantic serial position functions and a SIMPLE explanation.

    PubMed

    Kelley, Matthew R; Neath, Ian; Surprenant, Aimée M

    2013-05-01

    There are innumerable demonstrations of serial position functions-with characteristic primacy and recency effects-in episodic tasks, but there are only a handful of such demonstrations in semantic memory tasks, and those demonstrations have used only two types of stimuli. Here, we provide three more examples of serial position functions when recalling from semantic memory. Participants were asked to reconstruct the order of (1) two cartoon theme song lyrics, (2) the seven Harry Potter books, and (3) two sets of movies, and all three demonstrations yielded conventional-looking serial position functions with primacy and recency effects. The data were well-fit by SIMPLE, a local distinctiveness model of memory that was originally designed to account for serial position effects in short- and long-term episodic memory. According to SIMPLE, serial position functions in both episodic and semantic memory tasks arise from the same type of processing: Items that are more separated from their close neighbors in psychological space at the time of recall will be better remembered. We argue that currently available evidence suggests that serial position functions observed when recalling items that are presumably in semantic memory arise because of the same processes as those observed when recalling items that are presumably in episodic memory. PMID:23263860

  6. The Assessment of Experimental Methods of Serial Number Restoration

    NASA Astrophysics Data System (ADS)

    Argo, Mackenzie

    Serial number restoration is a common and successful process of revealing obliterated serial numbers on firearms. In a crime laboratory setting, obliterated serial numbers are commonly processed in order to tie a person to a crime scene or provide an investigative lead for officers. Currently serial numbers are restored using a chemical etchant method that can eat away at the metal on the firearm even after the examination is complete. It can also take several hours to complete and only provide an examiner with a partial number. There are other nondestructive options however little to no literature is available. The purpose of this study is to discover new methods for nondestructive serial number restoration and to compare them to the traditional chemical method used. Metal bars of premeasured obliteration depths and different compositions were examined using three proposed experimental methods: near infrared imaging, cold frost, and scanning acoustic microscopy. Results did not indicate significant difference in the median number of visible digits recovered for each of the three proposed methods compared to the traditional chemical method. There were significant results in the median number of composition utilized and depth of obliteration. This indicates that different firearm compositions and depth of obliteration has an effect on serial number restoration.

  7. Total body skeletal muscle mass: estimation by creatine (methyl-d3) dilution in humans.

    PubMed

    Clark, Richard V; Walker, Ann C; O'Connor-Semmes, Robin L; Leonard, Michael S; Miller, Ram R; Stimpson, Stephen A; Turner, Scott M; Ravussin, Eric; Cefalu, William T; Hellerstein, Marc K; Evans, William J

    2014-06-15

    Current methods for clinical estimation of total body skeletal muscle mass have significant limitations. We tested the hypothesis that creatine (methyl-d3) dilution (D3-creatine) measured by enrichment of urine D3-creatinine reveals total body creatine pool size, providing an accurate estimate of total body skeletal muscle mass. Healthy subjects with different muscle masses [n = 35: 20 men (19-30 yr, 70-84 yr), 15 postmenopausal women (51-62 yr, 70-84 yr)] were housed for 5 days. Optimal tracer dose was explored with single oral doses of 30, 60, or 100 mg D3-creatine given on day 1. Serial plasma samples were collected for D3-creatine pharmacokinetics. All urine was collected through day 5. Creatine and creatinine (deuterated and unlabeled) were measured by liquid chromatography mass spectrometry. Total body creatine pool size and muscle mass were calculated from D3-creatinine enrichment in urine. Muscle mass was also measured by magnetic resonance imaging (MRI), dual-energy x-ray absorptiometry (DXA), and traditional 24-h urine creatinine. D3-creatine was rapidly absorbed and cleared with variable urinary excretion. Isotopic steady-state of D3-creatinine enrichment in the urine was achieved by 30.7 ± 11.2 h. Mean steady-state enrichment in urine provided muscle mass estimates that correlated well with MRI estimates for all subjects (r = 0.868, P < 0.0001), with less bias compared with lean body mass assessment by DXA, which overestimated muscle mass compared with MRI. The dilution of an oral D3-creatine dose determined by urine D3-creatinine enrichment provides an estimate of total body muscle mass strongly correlated with estimates from serial MRI with less bias than total lean body mass assessment by DXA.

  8. Dilution physics modeling: Dissolution/precipitation chemistry

    SciTech Connect

    Onishi, Y.; Reid, H.C.; Trent, D.S.

    1995-09-01

    This report documents progress made to date on integrating dilution/precipitation chemistry and new physical models into the TEMPEST thermal-hydraulics computer code. Implementation of dissolution/precipitation chemistry models is necessary for predicting nonhomogeneous, time-dependent, physical/chemical behavior of tank wastes with and without a variety of possible engineered remediation and mitigation activities. Such behavior includes chemical reactions, gas retention, solids resuspension, solids dissolution and generation, solids settling/rising, and convective motion of physical and chemical species. Thus this model development is important from the standpoint of predicting the consequences of various engineered activities, such as mitigation by dilution, retrieval, or pretreatment, that can affect safe operations. The integration of a dissolution/precipitation chemistry module allows the various phase species concentrations to enter into the physical calculations that affect the TEMPEST hydrodynamic flow calculations. The yield strength model of non-Newtonian sludge correlates yield to a power function of solids concentration. Likewise, shear stress is concentration-dependent, and the dissolution/precipitation chemistry calculations develop the species concentration evolution that produces fluid flow resistance changes. Dilution of waste with pure water, molar concentrations of sodium hydroxide, and other chemical streams can be analyzed for the reactive species changes and hydrodynamic flow characteristics.

  9. THE ANISOTROPIC TRANSPORT EFFECTS ON DILUTE PLASMAS

    SciTech Connect

    Devlen, Ebru

    2011-04-20

    We examine the linear stability analysis of a hot, dilute, and differentially rotating plasma by considering anisotropic transport effects. In dilute plasmas, the ion Larmor radius is small compared with its collisional mean free path. In this case, the transport of heat and momentum along the magnetic field lines becomes important. This paper presents a novel linear instability that may be more powerful and greater than ideal magnetothermal instability and ideal magnetorotational instability in the dilute astrophysical plasmas. This type of plasma is believed to be found in the intracluster medium (ICM) of galaxy clusters and radiatively ineffective accretion flows around black holes. We derive the dispersion relation of this instability and obtain the instability condition. There is at least one unstable mode that is independent of the temperature gradient direction for a helical magnetic field geometry. This novel instability is driven by the gyroviscosity coupled with differential rotation. Therefore, we call it gyroviscous-modified magnetorotational instability (GvMRI). We examine how the instability depends on signs of the temperature gradient and the gyroviscosity and also on the magnitude of the thermal frequency and on the values of the pitch angle. We provide a detailed physical interpretation of the obtained results. The GvMRI is applicable not only to the accretion flows and ICM but also to the transition region between cool dense gas and the hot low-density plasma in stellar coronae, accretion disks, and the multiphase interstellar medium because it is independent of the temperature gradient direction.

  10. Contribution to diagnostics/prognostics of tuberculosis in children. I. New methods of assaying zinc and simultaneously copper and zinc in diluted sera by flame atomic-absorption spectrometry.

    PubMed

    Luterotti, Svjetlana; Kordić, Tončica Vukman; Dodig, Slavica

    2015-09-01

    In an attempt to provide a reliable status of metal ions in children, new methods of analysis of children's sera are proposed. New flame atomic-absorption spectrometric (FAAS) methods are simple, cost- and time-effective and, above all, labor-, reagent- and sample-saving. Two methods were suggested: method A for simultaneous determination of Cu and Zn from 5-fold diluted sera, and method B, for assaying zinc alone in 10-fold diluted samples. Both methods are based on a single-step sample pretreatment (deproteinization with 3 mol dm-3 HCl). Method A uses a single-step calibration with a mixed standard. The main advantage of method B is an additional reduction in sample consumption. Both methods were fully validated against reference methods. Accuracy, sensitivity and precision have proven them to be comparable to the reference methods in terms of analytical performance, and applicable to analyses of children's sera.

  11. Helium 3/Helium 4 dilution cryocooler for space

    NASA Technical Reports Server (NTRS)

    Hendricks, John B.; Dingus, Michael L.

    1991-01-01

    Prototype dilution cryocoolers based on dilution refrigeration and adiabatic demagnetization refrigeration (ADR) cycles were designed, constructed, and tested. Although devices the devices did not operate as fully functional dilution cryocoolers, important information was gathered. The porous metal phase separator was demonstrated to operate in the -1-g configuration; this phase separation is the critical element in the He-3 circulation dilution cryocooler. Improvements in instrumentation needed for additional tests and development were identified.

  12. 75 FR 56916 - Viruses, Serums, Toxins, and Analogous Products; Expiration Date Required for Serials and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... serials or subserials are released for marketing before the first production serials reach the end of... of production serials beginning on the day of filling into final containers or the date final... filed Outline of Production; and Require the periodic testing of serials or subserials to monitor...

  13. Analysis of assembly serial number usage in domestic light-water reactors

    SciTech Connect

    Reich, W.J. ); Moore, R.S. )

    1991-05-01

    Domestic light-water reactor (LWR) fuel assemblies are identified by a serial number that is placed on each assembly. These serial numbers are used as identifiers throughout the life of the fuel. The uniqueness of assembly serial numbers is important in determining their effectiveness as unambiguous identifiers. The purpose of this study is to determine what serial numbering schemes are used, the effectiveness of these schemes, and to quantify how many duplicate serial numbers occur on domestic LWR fuel assemblies. The serial numbering scheme adopted by the American National Standards Institute (ANSI) ensures uniqueness of assembly serial numbers. The latest numbering scheme adopted by General Electric (GE), was also found to be unique. Analysis of 70,971 fuel assembly serial numbers from permanently discharged fuel identified 11,948 serial number duplicates. Three duplicate serial numbers were found when analysis focused on duplication within the individual fuel inventory at each reactor site, but these were traced back to data entry errors and will be corrected by the Energy Information Administration (EIA). There were also three instances where the serial numbers used to identify assemblies used for hot cell studies differed from the serial numbers reported to the EIA. It is recommended that fuel fabricators and utilities adhere to the ANSI serial numbering scheme to ensure serial number uniqueness. In addition, organizations collecting serial number information, should request that all known serial numbers physically attached or associated with each assembly be reported and identified by the corresponding number scheme. 10 refs., 5 tabs.

  14. 21 CFR 172.710 - Adjuvants for pesticide use dilutions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Adjuvants for pesticide use dilutions. 172.710... HUMAN CONSUMPTION Other Specific Usage Additives § 172.710 Adjuvants for pesticide use dilutions. The following surfactants and related adjuvants may be safely added to pesticide use dilutions by a grower...

  15. 21 CFR 172.710 - Adjuvants for pesticide use dilutions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Adjuvants for pesticide use dilutions. 172.710... HUMAN CONSUMPTION Other Specific Usage Additives § 172.710 Adjuvants for pesticide use dilutions. The following surfactants and related adjuvants may be safely added to pesticide use dilutions by a grower...

  16. Microbial structural diversity estimated by dilution-extinction of phenotypic traits and T-RFLP analysis along a land-use intensification gradient.

    PubMed

    Gomez, Elena; Garland, Jay L; Roberts, Michael S

    2004-08-01

    The present work tested whether the relationship between functional traits and inoculum density reflected structural diversity in bacterial communities from a land-use intensification gradient applying a mathematical model. Terminal restriction fragment length polymorphism (T-RFLP) analysis was also performed to provide an independent assessment of species richness. Successive 10-fold dilutions of a soil suspension were inoculated onto Biolog GN(R) microplates. Soil bacterial density was determined by total cell and plate counts. The relationship between phenotypic traits and inoculum density fit the model, allowing the estimation of maximal phenotypic potential (Rmax) and inoculum density (KI) at which Rmax will be half-reduced. Though Rmax decreased with time elapsed since clearing of native vegetation, KI remained high in two of the disturbed sites. The genetic pool of bacterial community did not experience a significant reduction, but the active fraction responding in the Biolog assay was adversely affected, suggesting a reduction in the functional potential.

  17. Hardware Implementation of Serially Concatenated PPM Decoder

    NASA Technical Reports Server (NTRS)

    Moision, Bruce; Hamkins, Jon; Barsoum, Maged; Cheng, Michael; Nakashima, Michael

    2009-01-01

    A prototype decoder for a serially concatenated pulse position modulation (SCPPM) code has been implemented in a field-programmable gate array (FPGA). At the time of this reporting, this is the first known hardware SCPPM decoder. The SCPPM coding scheme, conceived for free-space optical communications with both deep-space and terrestrial applications in mind, is an improvement of several dB over the conventional Reed-Solomon PPM scheme. The design of the FPGA SCPPM decoder is based on a turbo decoding algorithm that requires relatively low computational complexity while delivering error-rate performance within approximately 1 dB of channel capacity. The SCPPM encoder consists of an outer convolutional encoder, an interleaver, an accumulator, and an inner modulation encoder (more precisely, a mapping of bits to PPM symbols). Each code is describable by a trellis (a finite directed graph). The SCPPM decoder consists of an inner soft-in-soft-out (SISO) module, a de-interleaver, an outer SISO module, and an interleaver connected in a loop (see figure). Each SISO module applies the Bahl-Cocke-Jelinek-Raviv (BCJR) algorithm to compute a-posteriori bit log-likelihood ratios (LLRs) from apriori LLRs by traversing the code trellis in forward and backward directions. The SISO modules iteratively refine the LLRs by passing the estimates between one another much like the working of a turbine engine. Extrinsic information (the difference between the a-posteriori and a-priori LLRs) is exchanged rather than the a-posteriori LLRs to minimize undesired feedback. All computations are performed in the logarithmic domain, wherein multiplications are translated into additions, thereby reducing complexity and sensitivity to fixed-point implementation roundoff errors. To lower the required memory for storing channel likelihood data and the amounts of data transfer between the decoder and the receiver, one can discard the majority of channel likelihoods, using only the remainder in

  18. [Transcriptomes for serial analysis of gene expression].

    PubMed

    Marti, Jacques; Piquemal, David; Manchon, Laurent; Commes, Thérèse

    2002-01-01

    The availability of the sequences for whole genomes is changing our understanding of cell biology. Functional genomics refers to the comprehensive analysis, at the protein level (proteome) and at the mRNA level (transcriptome) of all events associated with the expression of whole sets of genes. New methods have been developed for transcriptome analysis. Serial Analysis of Gene Expression (SAGE) is based on the massive sequential analysis of short cDNA sequence tags. Each tag is derived from a defined position within a transcript. Its size (14 bp) is sufficient to identify the corresponding gene and the number of times each tag is observed provides an accurate measurement of its expression level. Since tag populations can be widely amplified without altering their relative proportions, SAGE may be performed with minute amounts of biological extract. Dealing with the mass of data generated by SAGE necessitates computer analysis. A software is required to automatically detect and count tags from sequence files. Criterias allowing to assess the quality of experimental data can be included at this stage. To identify the corresponding genes, a database is created registering all virtual tags susceptible to be observed, based on the present status of the genome knowledge. By using currently available database functions, it is easy to match experimental and virtual tags, thus generating a new database registering identified tags, together with their expression levels. As an open system, SAGE is able to reveal new, yet unknown, transcripts. Their identification will become increasingly easier with the progress of genome annotation. However, their direct characterization can be attempted, since tag information may be sufficient to design primers allowing to extend unknown sequences. A major advantage of SAGE is that, by measuring expression levels without reference to an arbitrary standard, data are definitively acquired and cumulative. All publicly available data can thus

  19. Effect of type III antifreeze protein dilution and mutation on the growth inhibition of ice.

    PubMed Central

    DeLuca, C I; Chao, H; Sönnichsen, F D; Sykes, B D; Davies, P L

    1996-01-01

    Mutation of residues at the ice-binding site of type III antifreeze protein (AFP) not only reduced antifreeze activity as indicated by the failure to halt ice crystal growth, but also altered ice crystal morphology to produce elongated hexagonal bipyramids. In general, the c axis to a axis ratio of the ice crystal increased from approximately 2 to over 10 with the severity of the mutation. It also increased during ice crystal growth upon serial dilution of the wild-type AFP. This is in marked contrast to the behavior of the alpha-helical type I AFPs, where neither dilution nor mutation of ice-binding residues increases the c:a axial ratio of the ice crystal above the standard 3.3. We suggest that the ice crystal morphology produced by type III AFP and its mutants can be accounted for by the protein binding to the prism faces of ice and operating by step growth inhibition. In this model a decrease in the affinity of the AFP for ice leads to filling in of individual steps at the prism surfaces, causing the ice crystals to grow with a longer c:a axial ratio. Images FIGURE 3 FIGURE 4 PMID:8913575

  20. Positional and temporal clustering in serial order memory.

    PubMed

    Solway, Alec; Murdock, Bennet B; Kahana, Michael J

    2012-02-01

    The well-known finding that responses in serial recall tend to be clustered around the position of the target item has bolstered positional-coding theories of serial order memory. In the present study, we show that this effect is confounded with another well-known finding--that responses in serial recall tend to also be clustered around the position of the prior recall (temporal clustering). The confound can be alleviated by conditioning each analysis on the positional accuracy of the previously recalled item. The revised analyses show that temporal clustering is much more prevalent in serial recall than is positional clustering. A simple associative chaining model with asymmetric neighboring, remote associations, and a primacy gradient can account for these effects. Using the same parameter values, the model produces reasonable serial position curves and captures the changes in item and order information across study-test trials. In contrast, a prominent positional coding model cannot account for the pattern of clustering uncovered by the new analyses.

  1. Visual similarity effects in immediate verbal serial recall.

    PubMed

    Logie, R H; Della Sala, S; Wynn, V; Baddeley, A D

    2000-08-01

    The role of visual working memory in temporary serial retention of verbal information was examined in four experiments on immediate serial recall of words that varied in visual similarity and letters that varied in the visual consistency between upper and lower case. Experiments 1 and 2 involved words that were either visually similar (e.g. fly, cry, dry; hew, new, few) or were visually distinct (e.g. guy, sigh, lie; who, blue, ewe). Experiments 3 and 4 involved serial recall of both letter and case from sequences of letters chosen such that the upper- and lower-case versions were visually similar, for example Kk, Cc, Zz, Ww, or were visually dissimilar, for example Dd, Hh, Rr, Qq. Hence in the latter set, case information was encoded in terms of both the shape and the size of the letters. With both words and letters, the visually similar items resulted in poorer recall both with and without concurrent articulatory suppression. This visual similarity effect was robust and was replicated across the four experiments. The effect was not restricted to any particular serial position and was particularly salient in the recall of letter case. These data suggest the presence of a visual code for retention of visually presented verbal sequences in addition to a phonological code, and they are consistent with the use of a visual temporary memory, or visual "cache", in verbal serial recall tasks.

  2. The relationship between serial sexual murder and autoerotic asphyxiation.

    PubMed

    Myers, Wade C; Bukhanovskiy, Alexandr; Justen, Elle; Morton, Robert J; Tilley, John; Adams, Kenneth; Vandagriff, Virgil L; Hazelwood, Robert R

    2008-04-01

    This case series documents and examines the association between autoerotic asphyxiation, sadomasochism, and serial sexual murderers. Autoerotic asphyxiation, along with other paraphilias found in this population, is reviewed. Five cases of serial sexual killers who engaged in autoerotic asphyxiation were identified worldwide: four from the United States and one from Russia. Case reports for each are provided. All (100%) were found to have sexual sadism in addition to autoerotic asphyxiation. Furthermore, two (40%) had bondage fetishism, and two (40%) had transvestic fetishism, consistent with these paraphilias co-occurring in those with autoerotic asphyxiation. Overall the group averaged 4.0 lifetime paraphilias. Some possible relationships were observed between the offenders' paraphilic orientation and their modus operandi, e.g., all of these serial killers strangled victims-suggesting an association between their sadistic and asphyxiative paraphilic interests. The overlap of seemingly polar opposite paraphilias in this sample--sexual sadism and autoerotic asphyxiation--is explored from a historical and clinical perspective. Multiple commonalities shared between these five offenders and serial sexual murderers in general are addressed. A primary limitation of this study is its small sample size and empirical basis; the results may not be generalizable beyond the sample. The findings from this study support the supposition that crime scene behaviors often reflect paraphilic disturbances in those who commit serial sexual homicides.

  3. Genetic programming and serial processing for time series classification.

    PubMed

    Alfaro-Cid, Eva; Sharman, Ken; Esparcia-Alcázar, Anna I

    2014-01-01

    This work describes an approach devised by the authors for time series classification. In our approach genetic programming is used in combination with a serial processing of data, where the last output is the result of the classification. The use of genetic programming for classification, although still a field where more research in needed, is not new. However, the application of genetic programming to classification tasks is normally done by considering the input data as a feature vector. That is, to the best of our knowledge, there are not examples in the genetic programming literature of approaches where the time series data are processed serially and the last output is considered as the classification result. The serial processing approach presented here fills a gap in the existing literature. This approach was tested in three different problems. Two of them are real world problems whose data were gathered for online or conference competitions. As there are published results of these two problems this gives us the chance to compare the performance of our approach against top performing methods. The serial processing of data in combination with genetic programming obtained competitive results in both competitions, showing its potential for solving time series classification problems. The main advantage of our serial processing approach is that it can easily handle very large datasets. PMID:24032750

  4. Hemodynamics in Coronary Arterial Tree of Serial Stenoses

    PubMed Central

    Lu, Bin; Jia, Xinwei; Zhong, Liang; Kassab, Ghassan S.; Tan, Wenchang

    2016-01-01

    Serial segmental narrowing frequently occurs in humans, which alters coronary hemodynamics and further affects atherosclerotic progression and plaque formation. The objective of this study was to understand the distribution of hemodynamic parameters in the epicardial left main coronary arterial (LMCA) tree with serial stenoses reconstructed from patient computer tomography angiography (CTA) images. A finite volume method was used in conjunction with the inlet pressure wave and outlet flow resistance. The time-averaged wall shear stress (TAWSS) and oscillatory shear index (OSI) were determined from the flow field. A stenosis at a mother vessel mainly deteriorated the hemodynamics near the bifurcation while a stenosis at a daughter vessel affected the remote downstream bifurcation. In comparison with a single stenosis, serial stenoses increased the peak pressure gradient along the main trunk of the epicardial left anterior descending arterial tree by > 50%. An increased distance between serial stenoses further increased the peak pressure gradient. These findings have important implications on the diagnosis and treatment of serial coronary stenoses. PMID:27685989

  5. The relationship between serial sexual murder and autoerotic asphyxiation.

    PubMed

    Myers, Wade C; Bukhanovskiy, Alexandr; Justen, Elle; Morton, Robert J; Tilley, John; Adams, Kenneth; Vandagriff, Virgil L; Hazelwood, Robert R

    2008-04-01

    This case series documents and examines the association between autoerotic asphyxiation, sadomasochism, and serial sexual murderers. Autoerotic asphyxiation, along with other paraphilias found in this population, is reviewed. Five cases of serial sexual killers who engaged in autoerotic asphyxiation were identified worldwide: four from the United States and one from Russia. Case reports for each are provided. All (100%) were found to have sexual sadism in addition to autoerotic asphyxiation. Furthermore, two (40%) had bondage fetishism, and two (40%) had transvestic fetishism, consistent with these paraphilias co-occurring in those with autoerotic asphyxiation. Overall the group averaged 4.0 lifetime paraphilias. Some possible relationships were observed between the offenders' paraphilic orientation and their modus operandi, e.g., all of these serial killers strangled victims-suggesting an association between their sadistic and asphyxiative paraphilic interests. The overlap of seemingly polar opposite paraphilias in this sample--sexual sadism and autoerotic asphyxiation--is explored from a historical and clinical perspective. Multiple commonalities shared between these five offenders and serial sexual murderers in general are addressed. A primary limitation of this study is its small sample size and empirical basis; the results may not be generalizable beyond the sample. The findings from this study support the supposition that crime scene behaviors often reflect paraphilic disturbances in those who commit serial sexual homicides. PMID:17980531

  6. Genetic programming and serial processing for time series classification.

    PubMed

    Alfaro-Cid, Eva; Sharman, Ken; Esparcia-Alcázar, Anna I

    2014-01-01

    This work describes an approach devised by the authors for time series classification. In our approach genetic programming is used in combination with a serial processing of data, where the last output is the result of the classification. The use of genetic programming for classification, although still a field where more research in needed, is not new. However, the application of genetic programming to classification tasks is normally done by considering the input data as a feature vector. That is, to the best of our knowledge, there are not examples in the genetic programming literature of approaches where the time series data are processed serially and the last output is considered as the classification result. The serial processing approach presented here fills a gap in the existing literature. This approach was tested in three different problems. Two of them are real world problems whose data were gathered for online or conference competitions. As there are published results of these two problems this gives us the chance to compare the performance of our approach against top performing methods. The serial processing of data in combination with genetic programming obtained competitive results in both competitions, showing its potential for solving time series classification problems. The main advantage of our serial processing approach is that it can easily handle very large datasets.

  7. Solubility of solutes in compressed gases: Dilute solution theory

    SciTech Connect

    Wang, X.; Tavlarides, L.L. . Dept. of Chemical Engineering)

    1994-03-01

    A dilute solution theory is developed for describing the thermodynamic behavior of a compressed gaseous dilute solution. The considerations follow generally accepted statistical treatments for describing dilute liquid solutions. The theory is self-consistent with the ideal gas law for dilute gases and with Henry's law for dilute liquid (or solid) solutions. Further, it provides a simple linear relationship which represents well the solubility behavior of a heavy solute (solid or liquid) in a gaseous solvent over relatively wide density regions of the solvent (i.e., 0 [le] [rho] [le] 2.0/V[sub c]).

  8. Magnetopolaron effect in diluted semimagnetic semiconductors

    NASA Astrophysics Data System (ADS)

    Tarasov, Georgiy G.; Mazur, Yuri I.; Rakitin, Andrey S.; Lavoric, S. R.; Tomm, Jens W.; Hoerstel, W.

    1997-08-01

    Phonon-assisted self-trapping of free carrier is considered in diluted semimagnetics. It is shown that the binding energy of free magnetic polaron can be substantially larger when the 'spin-phonon' coupling is taken into account. For the particular case of 'soft' lattice dynamics the region of stability for hole-induced polaron can be promoted to the temperature of tenths of degrees and magnetic field of a few Tesla. The possible hybridized excitations with the partition of free magnetic polaron are discussed in semimagnetic semiconductors.

  9. Steadiness in Dilute Pyroclastic Density Currents

    NASA Astrophysics Data System (ADS)

    Andrews, B. J.

    2015-12-01

    Pyroclastic density currents (PDCs) are often unsteady, as evidenced by direct observations of dilute lobes or jets emerging from the fronts of larger currents and by deposits that indicate transient transport and depositional regimes. We used scaled experiments to investigate unsteadiness in dilute PDCs. The experimental currents were run in an 8.5x6.1x2.6 m tank and comprised heated or ambient temperature 20-μm talc powder turbulently suspended in air. Experiments were scaled such that densimetric and thermal Richardson numbers, Froude number, and particle Stokes and settling numbers were dynamically similar to natural dilute PDCs. Although the experiment Reynolds numbers are substantially lower than those of natural PDCs, the experiments are fully turbulent. Experiments were observed with video and high-speed cameras and high-frequency thermocouples. Currents were generated with total eruption durations of 100 s. Unsteadiness in source conditions was produced by interrupting supply for intervals, t, with durations of 1, 2.5, 5, and 10 s in the experimental runs at 35 and 70 s. When t<2.5 s, the currents are indistinguishable from currents with steady supply. In runs with t=2.5-5 s, the individual pulses comprising each current are readily apparent near the source, but decay with distance downstream until the currents appear as single (e.g. steady) flows. In experiments with t=10 s, the 3 pulses comprising each run never merge and the currents remain unsteady. Comparison with the integral turbulent timescale, τ, and current velocity, U, show that unsteadiness is persistent when t>3<τ but currents are steady when t<τ. In currents with 3τ>t>τ, unsteadiness decays such that at a distance of ~4Ut, the currents are again steady. Applied to natural dilute PDCs, our results suggest that currents and their resulting deposits, will only show evidence of unsteadiness if they are disrupted for many seconds and those breaks may "heal" over distances of 100s of meters.

  10. Diluted Magnetic Iv-Vi Compounds

    NASA Astrophysics Data System (ADS)

    Bauer, G.; Pascher, H.

    The following sections are included: * INTRODUCTION * MAGNETIC PROPERTIES * Susceptibility * High Field Magnetization * Spin Glass Phase * Free Carrier Induced Ferromagnetism * Magnetic Properties of Layered IV-VI Diluted Magnetic Semiconductors * CALCULATION OF LANDAU STATES: MEAN FIELD THEORY FOR IV-VI COMPOUNDS * MAGNETOTRANSPORT * OPTICAL INTERBAND TRANSITIONS * Photoluminescence Without Magnetic Field * Magnetooptical Interband Transitions * COHERENT RAMAN SCATTERING * Theory * Classical approach * Nonlinear susceptibility in semiconductors * Experimental Results and Discussion * Results: Pb1-xMnxTe * Results: Pb1-xEuxSe * Effective Electron and Hole g factors * FAR INFRARED SPECTROSCOPY * COMPARISON EXPERIMENT - MOLECULAR FIELD THEORY * Band and Exchange Parameters * Selection Rules * CONCLUSION * ACKNOWLEDGEMENTS * REFERENCES

  11. Serial position effects in implicit and explicit tests of memory.

    PubMed

    Gershberg, F B; Shimamura, A P

    1994-11-01

    The effects of serial position at study on implicit and explicit tests of memory were investigated. Both primary and recency effects were observed in implicit tests of word-stem completion. These effects, however, were transient. No serial position effects were found in the second half of testing (Experiments 1 and 3) or when testing followed a 1-min, filled delay (Experiment 2). Serial position effects were also examined in explicit tests of cued recall. When performance on explicit cued recall was below ceiling levels, a primacy effect persisted throughout testing (Experiment 3). Similarly, in explicit tests of free recall, primacy effects were consistently observed, both with immediate testing (Experiments 1 and 3) and when testing followed a filled delay (Experiment 2).

  12. Serial processing in reading aloud: reply to Zorzi (2000).

    PubMed

    Rastle, K; Coltheart, M

    2000-06-01

    K. Rastle and M. Coltheart (1999; see also M. Coltheart & K. Rastle, 1994) reported data demonstrating that the cost of irregularity in reading aloud low-frequency exception words is modulated by the position of the irregularity in the word. They argued that these data implicated a serial process and falsified all models of reading aloud that operate solely in parallel, a conclusion that M. Zorzi (2000) challenged by successfully simulating the position of irregularity effect with such a model. Zorzi (2000) further claimed that a reanalysis of K. Rastle and M. Coltheart's (1999) data demonstrates sensitivity to grapheme-phoneme consistency (which he claimed was confounded across the position of irregularity manipulation) rather than the use of a serial process. Here, the authors argue that M. Zorzi's (2000) reanalyses were inappropriate and reassert that K. Rastle and M. Coltheart's (1999) findings are evidence for serial processing.

  13. A combination strategy for tracking the serial criminal

    NASA Astrophysics Data System (ADS)

    He, Chuan; Zhang, Yuan-Biao; Wan, Jiadi; Yu, Wenjing

    2010-08-01

    We build a Geographic Profiling Model to generate the criminal's geographical profile, by combining two complementary strategies: the Spatial Distribution Strategy and the Probability Distance Strategy. In the first strategy, we designate the mean of all the known crime sites as the anchor point, and build a Standard Deviational Ellipse Model, considering the effect of landscape. In the second strategy, we take many factors such as the buffer zone and distance decay theory into consideration and calculate the probability of the offender's residence in a certain area by using the Bayesian Theorem and the Rossmo Algorithm. Then, we combine the result of two strategies and get three search areas suit different conditions of the police to track the serial criminal. Apply the model to the English serial killer Peter Sutcliffe's case, the calculation result shows that the model can effectively be used to track serial criminal.

  14. The simultaneous chain: a new approach to serial learning.

    PubMed

    Terrace, Herbert S

    2005-04-01

    Recent advances have allowed the application of behaviorism's rigor to the control of complex cognitive tasks in animals. This article examines recent research on serially organized behavior in animals. 'Chaining theory', the traditional approach to the study of such behavior, reduces intelligent action to sequences of discrete stimulus-response units in which each overt response is evoked by a particular stimulus. However, such theories are too weak to explain many forms of serially organized cognition, both in humans and animals. By training non-human primates to produce arbitrary sequences that cannot be learned as chains of particular motor responses, the simultaneous chaining paradigm has overcome limitations of chaining theory in experiments on serial expertise, the use of numerical rules, knowledge of ordinal position, and distance and magnitude effects.

  15. Energy data base. Serial titles with ISSN listing

    SciTech Connect

    Hendricks, P.L.

    1984-03-01

    This issue of Serial Titles with ISSN Listing is the first revision of DOE/TIC-4579 to include the International Standard Serial Number (ISSN) for journals. The TIC journal authority was established to bring about conformity in citing the approximately 16,000 titles contained in this authority. It can prove to be a valuable tool in establishing the precise journal by ISSN and CODEN indication, especially for journals with the same title published in different locations. Serial Titles with ISSN Listing is comprised of two parts. Part 1 is an alphabetical listing by full title of the publication and also includes abbreviated title, CODEN, ISSN, coverage code, and country code. Part 2 is an ISSN-title correlation arranged in numeric order by ISSN and also includes the CODEN and full title.

  16. Towards time-resolved serial crystallography in a microfluidic device.

    PubMed

    Pawate, Ashtamurthy S; Šrajer, Vukica; Schieferstein, Jeremy; Guha, Sudipto; Henning, Robert; Kosheleva, Irina; Schmidt, Marius; Ren, Zhong; Kenis, Paul J A; Perry, Sarah L

    2015-07-01

    Serial methods for crystallography have the potential to enable dynamic structural studies of protein targets that have been resistant to single-crystal strategies. The use of serial data-collection strategies can circumvent challenges associated with radiation damage and repeated reaction initiation. This work utilizes a microfluidic crystallization platform for the serial time-resolved Laue diffraction analysis of macroscopic crystals of photoactive yellow protein (PYP). Reaction initiation was achieved via pulsed laser illumination, and the resultant electron-density difference maps clearly depict the expected pR(1)/pR(E46Q) and pR(2)/pR(CW) states at 10 µs and the pB1 intermediate at 1 ms. The strategies presented here have tremendous potential for extension to chemical triggering methods for reaction initiation and for extension to dynamic, multivariable analyses.

  17. Information transfer rate with serial and simultaneous visual display formats

    NASA Astrophysics Data System (ADS)

    Matin, Ethel; Boff, Kenneth R.

    1988-04-01

    Information communication rate for a conventional display with three spatially separated windows was compared with rate for a serial display in which data frames were presented sequentially in one window. For both methods, each frame contained a randomly selected digit with various amounts of additional display 'clutter.' Subjects recalled the digits in a prescribed order. Large rate differences were found, with faster serial communication for all levels of the clutter factors. However, the rate difference was most pronounced for highly cluttered displays. An explanation for the latter effect in terms of visual masking in the retinal periphery was supported by the results of a second experiment. The working hypothesis that serial displays can speed information transfer for automatic but not for controlled processing is discussed.

  18. Towards time-resolved serial crystallography in a microfluidic device

    PubMed Central

    Pawate, Ashtamurthy S.; Šrajer, Vukica; Schieferstein, Jeremy; Guha, Sudipto; Henning, Robert; Kosheleva, Irina; Schmidt, Marius; Ren, Zhong; Kenis, Paul J. A.; Perry, Sarah L.

    2015-01-01

    Serial methods for crystallography have the potential to enable dynamic structural studies of protein targets that have been resistant to single-crystal strategies. The use of serial data-collection strategies can circumvent challenges associated with radiation damage and repeated reaction initiation. This work utilizes a microfluidic crystallization platform for the serial time-resolved Laue diffraction analysis of macroscopic crystals of photoactive yellow protein (PYP). Reaction initiation was achieved via pulsed laser illumination, and the resultant electron-density difference maps clearly depict the expected pR1/pRE46Q and pR2/pRCW states at 10 µs and the pB1 intermediate at 1 ms. The strategies presented here have tremendous potential for extension to chemical triggering methods for reaction initiation and for extension to dynamic, multivariable analyses. PMID:26144226

  19. Neutron scattering study of dilute supercritical solutions

    NASA Astrophysics Data System (ADS)

    Cochran, H. D.; Wignall, G. D.; Shah, V. M.; Londono, J. D.; Bienkowski, P. R.

    Dilute solutions in supercritical solvents exhibit interesting microstructures that are related to their dramatic macroscopic behavior. In typical attractive solutions, solutes are believed to be surrounded by clusters of solvent molecules, and solute molecules are believed to congregate in the vicinity of one another. Repulsive solutions, on the other hand, exhibit a local region of reduced solvent density around the solute with solute-solute congregation. Such microstructures influence solubility, partial molar volume, reaction kinetics, and many other properties. We have undertaken to observe these interesting microstructures directly by neutron scattering experiments on dilute noble gas systems including Ar. The three partial structure factors for such systems and the corresponding pair correlation functions can be determined by using the isotope substitution technique. The systems studied are uniquely suited for our objectives because of the large coherent neutron scattering length of the isotope (sup 36)Ar and because of the accurate potential energy functions that are available for use in molecular simulations and theoretical calculations to be compared with the scattering results. We will describe our experiment, the unique apparatus we have built for it, and the neutron scattering results from our initial allocations of beam time. We will also describe planned scattering experiments to follow those with noble gases, including study of long-chain molecules in supercritical solvents. Such studies will involve hydrocarbon mixtures with and without deuteration to provide contrast.

  20. Neutron scattering study of dilute supercritical solutions

    SciTech Connect

    Cochran, H.D.; Wignall, G.D.; Shah, V.M.; Londono, J.D.; Bienkowski, P.R.

    1994-10-01

    Dilute solutions in supercritical solvents exhibit interesting microstructures that are related to their dramatic macroscopic behavior. In typical attractive solutions, solutes are believed to be surrounded by clusters of solvent molecules, and solute molecules are believed to congregate in the vicinity of one another. Repulsive solutions, on the other hand, exhibit a local region of reduced solvent density around the solute with solute-solute congregation. Such microstructures influence solubility, partial molar volume, reaction kinetics, and many other properties. We have undertaken to observe these interesting microstructures directly by neutron scattering experiments on dilute noble gas systems including Ar. The three partial structure factors for such systems and the corresponding pair correlation functions can be determined by using the isotope substitution technique. The systems studied are uniquely suited for our objectives because of the large coherent neutron scattering length of the isotope {sup 36}Ar and because of the accurate potential energy functions that are available for use in molecular simulations and theoretical calculations to be compared with the scattering results. We will describe our experiment, the unique apparatus we have built for it, and the neutron scattering results from our initial allocations of beam time. We will also describe planned scattering experiments to follow those with noble gases, including study of long-chain molecules in supercritical solvents. Such studies will involve hydrocarbon mixtures with and without deuteration to provide contrast.

  1. Serial control of phonology in speech production: a hierarchical model.

    PubMed

    Vousden, J I; Brown, G D; Harley, T A

    2000-09-01

    A dynamic oscillator-based model of the sequencing of phonemes in speech production (OSCAR) is described. An analysis of phoneme movement errors (anticipations, perseverations, and exchanges) from a large naturalistic speech error corpus provides a new set of data suitable for quantitative modeling and is used to derive a set of constraints that any speech-production model must address. The new computational model is shown to account for error type proportions, movement error distance gradients, the syllable-position effect, and phonological similarity effects. The model provides an alternative to frame-based accounts, serial buffer accounts, and associative chaining theories of serial order processing in speech.

  2. Serial murder in America: case studies of seven offenders.

    PubMed

    Beasley, James O

    2004-01-01

    This article summarizes and compares information on seven interviewed serial killers in an ongoing project designed to study similarities and differences among these individuals. The aim of this article is to increase our collective knowledge of the dynamics of serial murder by examining the perpetrators' backgrounds, as well as the unique ways in which they view themselves and the world around them. Although qualitative interview research alone is not sufficient to fully understand such behavior, it is useful in many ways. Some of the information discussed based on the seven offenders interviewed is compared with broader epidemiological studies, and the strengths and limitations of each type of research are discussed.

  3. Serial murder in America: case studies of seven offenders.

    PubMed

    Beasley, James O

    2004-01-01

    This article summarizes and compares information on seven interviewed serial killers in an ongoing project designed to study similarities and differences among these individuals. The aim of this article is to increase our collective knowledge of the dynamics of serial murder by examining the perpetrators' backgrounds, as well as the unique ways in which they view themselves and the world around them. Although qualitative interview research alone is not sufficient to fully understand such behavior, it is useful in many ways. Some of the information discussed based on the seven offenders interviewed is compared with broader epidemiological studies, and the strengths and limitations of each type of research are discussed. PMID:15211559

  4. In situ serial Laue diffraction on a microfluidic crystallization device

    PubMed Central

    Perry, Sarah L.; Guha, Sudipto; Pawate, Ashtamurthy S.; Henning, Robert; Kosheleva, Irina; Srajer, Vukica; Kenis, Paul J. A.; Ren, Zhong

    2014-01-01

    Renewed interest in room-temperature diffraction has been prompted by the desire to observe structural dynamics of proteins as they function. Serial crystallography, an experimental strategy that aggregates small pieces of data from a large uniform pool of crystals, has been demonstrated at synchrotrons and X-ray free-electron lasers. This work utilizes a microfluidic crystallization platform for serial Laue diffraction from macroscopic crystals and proposes that a collection of small slices of Laue data from many individual crystals is a realistic solution to the difficulties in dynamic studies of irreversible biochemical reactions. PMID:25484843

  5. Native sulfur/chlorine SAD phasing for serial femtosecond crystallography

    SciTech Connect

    Nakane, Takanori; Song, Changyong; Suzuki, Mamoru; Nango, Eriko; Kobayashi, Jun; Masuda, Tetsuya; Inoue, Shigeyuki; Mizohata, Eiichi; Nakatsu, Toru; Tanaka, Tomoyuki; Tanaka, Rie; Shimamura, Tatsuro; Tono, Kensuke; Joti, Yasumasa; Kameshima, Takashi; Hatsui, Takaki; Yabashi, Makina; Nureki, Osamu; Iwata, So; Sugahara, Michihiro

    2015-11-27

    Sulfur SAD phasing facilitates the structure determination of diverse native proteins using femtosecond X-rays from free-electron lasers via serial femtosecond crystallography. Serial femtosecond crystallography (SFX) allows structures to be determined with minimal radiation damage. However, phasing native crystals in SFX is not very common. Here, the structure determination of native lysozyme from single-wavelength anomalous diffraction (SAD) by utilizing the anomalous signal of sulfur and chlorine at a wavelength of 1.77 Å is successfully demonstrated. This sulfur SAD method can be applied to a wide range of proteins, which will improve the determination of native crystal structures.

  6. Tumoral calcinosis: Serial images to monitor successful dietary therapy

    SciTech Connect

    Manaster, B.J.; McDowell Anderson, T. Jr.

    1982-05-01

    Tumoral calcinosis involves formation of periarticular calcified soft tissue masses. Experimental evidence suggests a metabolic etiology with dietary restriction of calcium and phosphorus as beneficial therapy. We prospectively monitored serum levels of calcium, phosphorous, alkaline phosphatase, and erythrocyte sedimentation rate (ESR) while successfully treating a patient with tumoral calcinosis. The values were compared with changes on serial radiographic and radionuclide bone and gallium images. Our work suggests using serial serum phosphate levels and the ESR as the most sensitive indications of progress in dietary treatment of tumoral calcinosis.

  7. Characterization of the Dilute Ising Antiferromagnet

    SciTech Connect

    Wiener, T.

    2000-09-12

    A spin glass is a magnetic ground state in which ferromagnetic and antiferromagnetic exchange interactions compete, thereby creating frustration and a multidegenerate state with no long range order. An Ising system is a system where the spins are constrained to lie parallel or antiparallel to a primary axis. There has been much theoretical interest in the past ten years in the effects of applying a magnetic field transverse to the primary axis in an Ising spin glass at low temperatures and thus study phase transitions at the T=0 limit. The focus of this study is to search for and characterize a new Ising spin glass system. This is accomplished by site diluting yttrium for terbium in the crystalline material TbNi{sub 2}Ge{sub 2}. The first part of this work gives a brief overview of the physics of rare earth magnetism and an overview of experimental characteristics of spin glasses. This is followed by the methodology used to manufacture the large single crystals used in this study, as well as the measurement techniques used. Next, a summary of the results of magnetic measurements on across the dilution series from pure terbium to pure yttrium is presented. This is followed by detailed measurements on particular dilutions which demonstrate spin glass behavior. Pure TbNi{sub 2}Ge{sub 2} is an Ising antiferromagnet with a several distinct metamagnetic states below 17 K. As the terbium is alloyed with yttrium, these magnetic states are weakened in a consistent manner, as is seen in measurements of the transition temperatures and analysis of Curie-Weiss behavior at high temperature. At low concentrations of terbium, below 35%, long range order is no longer present and a spin-glass-like state emerges. This state is studied through various measurements, dc and ac susceptibility, resistivity, and specific heat. This magnetic behavior was then compared to that of other well characterized spin glasses. It is concluded that there is a region of concentration s for which a spin

  8. Within-word serial order control: Adjacent mora exchange and serial position effects in repeated single-word production.

    PubMed

    Nakayama, Masataka; Saito, Satoru

    2014-06-01

    An essential function of language processing is serial order control. Computational models of serial ordering and empirical data suggest that plan representations for ordered output of sound are governed by principles related to similarity. Among these principles, the temporal distance and edge principles at a within-word level have not been empirically demonstrated separately from other principles. Specifically, the temporal distance principle assumes that phonemes that are in the same word and thus temporally close are represented similarly. This principle would manifest as phoneme movement errors within the same word. However, such errors are rarely observed in English, likely reflecting stronger effects of syllabic constraints (i.e., phonemes in different positions within the syllable are distinctly represented). The edge principle assumes that the edges of a sequence are represented distinctly from other elements/positions. This principle has been repeatedly observed as a serial position effect in the context of phonological short-term memory. However, it has not been demonstrated in single-word production. This study provides direct evidence for the two abovementioned principles by using a speech-error induction technique to show the exchange of adjacent morae and serial position effects in Japanese four-mora words. Participants repeatedly produced a target word or nonword, immediately after hearing an aurally presented distractor word. The phonologically similar distractor words, which were created by exchanging adjacent morae in the target, induced adjacent-mora-exchange errors, demonstrating the within-word temporal distance principle. There was also a serial position effect in error rates, such that errors were mostly induced at the middle positions within a word. The results provide empirical evidence for the temporal distance and edge principles in within-word serial order control.

  9. Dynamical Threshold of Diluteness of Soft Colloids

    SciTech Connect

    Chen, Wei-Ren; Do, Changwoo; Egami, T; Falus, Peter; Li, Xin; Liu, Dazhi; Porcar, L.; Sanchez-Diaz, Luis E; Smith, Gregory Scott; Wu, Bin

    2014-01-01

    The dynamics of soft colloids in solutions is characterized by internal collective motion as well as center-of-mass diffusion. Using neutron scattering we demonstrate that the competition between the relaxation processes associated with these two degrees of freedom results in strong dependence of dynamics and structure on colloid concentration, c, well below the overlap concentration c*. Triggered by the increasing inter-particle collisions, substantial structural dehydration and slowing-down of internal dynamics occurs before geometrically defined colloidal overlap develops. This observation is surprising since it is generally believed that the internal dynamics and conformation of soft colloidal particles essentially remain invariant below c*. The competition between these two relaxation processes gives rise to a new dynamically-defined dilute threshold concentration well below c*.

  10. Maximum independent set on diluted triangular lattices

    NASA Astrophysics Data System (ADS)

    Fay, C. W., IV; Liu, J. W.; Duxbury, P. M.

    2006-05-01

    Core percolation and maximum independent set on random graphs have recently been characterized using the methods of statistical physics. Here we present a statistical physics study of these problems on bond diluted triangular lattices. Core percolation critical behavior is found to be consistent with the standard percolation values, though there are strong finite size effects. A transfer matrix method is developed and applied to find accurate values of the density and degeneracy of the maximum independent set on lattices of limited width but large length. An extrapolation of these results to the infinite lattice limit yields high precision results, which are tabulated. These results are compared to results found using both vertex based and edge based local probability recursion algorithms, which have proven useful in the analysis of hard computational problems, such as the satisfiability problem.

  11. Crystallization of a dilute atomic dipolar condensate

    NASA Astrophysics Data System (ADS)

    Bisset, Russell; Blakie, Blair

    2016-05-01

    A recent experiment found that a dilute BEC of highly-magnetic dysprosium atoms may spontaneously break up into a crystal of droplets, a process reminiscent of the Rosensweig instability [ArXiv:1508.05007]. We dynamically simulate this scenario and find that the standard dipolar Gross-Pitaevskii equation (GPE) cannot explain such a droplet crystal. Indeed, the GPE predicts too much heating during the violent droplet formation, and a droplet lifetime that is much shorter than observed in the experiment. We investigate the requisite properties of the unknown stabilization mechanism, and find that an effective repulsive interaction with a higher order density dependence than the usual two-body interactions is required to quantitatively reproduce the experimental results.

  12. Dilute acid saccharification of lignocellulosic biomass

    SciTech Connect

    Penner, M.H.; Hashimoto, A.G.

    1995-12-01

    Aqueous dilute sulfuric acid solutions have been evaluated in terms of their effectiveness for the saccharification of the insoluble xylan fraction of poplar and switchgrass feedstocks. Acid concentrations ranging from .6 to 1.2% have been tested at temperatures ranging from 120 to 160{degrees}C. Treatments at optimum time, temperature, and acid combinations provided xylose yields of approximately 90% theoretical. Rate constants associated with xylan hydrolysis and xylose degradation for each of the feed-stocks have been evaluated. In general, optimum yields were associated with high temperature treatments for relatively short reaction times. Results from our laboratory will be presented with reference to previously published studies on hemicellulose saccharification and in the general context of converting lignocellulosic biomass to useful products.

  13. Hyperuniformity in periodically sheared dilute suspensions

    NASA Astrophysics Data System (ADS)

    Wilken, Sam; Guerra, Rodrigo; Pine, David J.; Chaikin, Paul M.

    Periodically sheared dilute, non-Brownian suspensions explore new configurations through collisions in an otherwise reversible flow. Below a critical strain, the particles remain active until they find a configuration with no collisions and reach an absorbing state. Recent simulations by Hexner and Levine have shown that the configuration of particles in the critically absorbing state is hyperuniform. The particle number fluctuations of hyperuniform systems decrease with counting box size more rapidly than random systems (like the same suspension that is not in a critically absorbing state). We built a compact, lightweight uni-axial shear cell where particle coordinates can be measured while shearing with a confocal microscope. We have identified hyperuniform structures with density fluctuation measurements in colloidal suspensions of up to 40% volume fraction in the critically absorbing state with a strain ramp down protocol and find hyperuniform scaling of the density fluctuations.

  14. Shock waves in a dilute granular gas

    NASA Astrophysics Data System (ADS)

    Reddy, M. H. Lakshminarayana; Ansumali, Santosh; Alam, Meheboob

    2014-12-01

    We study the evolution of shock waves in a dilute granular gas which is modelled using three variants of hydrodynamic equations: Euler, 10-moment and 14-moment models. The one-dimensional shock-wave problem is formulated and the resulting equations are solved numerically using a relaxation-type scheme. Focusing on the specific case of blast waves, the results on the density, the granular temperature, the skew temperature, the heat flux and the fourth moment are compared among three models. We find that the shock profiles are smoother for the 14-moment model compared to those predicted by the standard Euler equations. A shock-splitting phenomenon is observed in the skew granular temperature profiles for a blast wave.

  15. Negative magnetophoresis in diluted ferrofluid flow.

    PubMed

    Hejazian, Majid; Nguyen, Nam-Trung

    2015-07-21

    We report magnetic manipulation of non-magnetic particles suspended in diluted ferrofluid. Diamagnetic particles were introduced into a circular chamber to study the extent of their deflection under the effect of a non-uniform magnetic field of a permanent magnet. Since ferrofluid is a paramagnetic medium, it also experiences a bulk magnetic force that in turn induces a secondary flow opposing the main hydrodynamic flow. Sheath flow rate, particle size, and magnetic field strength were varied to examine this complex behaviour. The combined effect of negative magnetophoresis and magnetically induced secondary flow leads to various operation regimes, which can potentially find applications in separation, trapping and mixing of diamagnetic particles such as cells in a microfluidic system. PMID:26054840

  16. Dilute spin-orbit Fermi gases

    NASA Astrophysics Data System (ADS)

    Maldonado-Mundo, Daniel; He, Lianyi; Öhberg, Patrik; Valiente, Manuel

    2014-03-01

    We study repulsive Fermi gases with Rashba spin-orbit coupling in two and three dimensions when they are dilute enough that a single branch of the spectrum is occupied in the non-interacting ground state. We develop an effective renormalizable theory for fermions in the lower branch and obtain the energy of the system in three dimensions to second order in the renormalized coupling constant. We then exploit the non-Galilean-relativistic nature of spin-orbit coupled gases. We find that at finite momentum, the two-dimensional Fermi sea is deformed in a non-trivial way. Using mean-field theory to include interactions, we show that the ground-state of the system acquires a finite momentum, and is consequently deformed, when the interaction is stronger than a critical value. Heriot-Watt University. CM-DTC. SUPA. EPSRC.

  17. Nucleation of flocs in dilute colloidal suspensions

    SciTech Connect

    Agrawal, D.C.; Raj, R.; Cohen, C. )

    1989-11-01

    In contrast to earlier theories which assume that coagulation of particles in dilute colloidal suspensions occurs by random collisions, the authors present evidence that coagulation is limited by a nucleation and growth phenomenon, typical of a phase transformation. They show that suspensions of well-dispersed particles, which are almost indefinitely stable, flocculate rapidly when seeded with pregrown flocs. The nucleation argument is supported further by the observation that flocs which are grown at low {zeta} potential, where the particles strongly attract, do not peptize when the pH is changed to high {zeta} potential, where the attraction is weak. The experiments were carried out with aqueous dispersions of alumina particles. The timedependent change in cluster sizes was measured by in situ photon correlation spectroscopy. The observations raise the question of agglomeration as a phase transformation, involving a change in entropy, when the system moves from a dispersed to a flocculated state.

  18. Diluted magnetic semiconductors with narrow band gaps

    NASA Astrophysics Data System (ADS)

    Gu, Bo; Maekawa, Sadamichi

    2016-10-01

    We propose a method to realize diluted magnetic semiconductors (DMSs) with p - and n -type carriers by choosing host semiconductors with a narrow band gap. By employing a combination of the density function theory and quantum Monte Carlo simulation, we demonstrate such semiconductors using Mn-doped BaZn2As2 , which has a band gap of 0.2 eV. In addition, we found a nontoxic DMS Mn-doped BaZn2Sb2 , of which the Curie temperature Tc is predicted to be higher than that of Mn-doped BaZn2As2 , the Tc of which was up to 230 K in a recent experiment.

  19. MITESS: a moored in situ trace element serial sampler for deep-sea moorings

    NASA Astrophysics Data System (ADS)

    Bell, Jory; Betts, Joe; Boyle, Edward

    2002-11-01

    We have designed, constructed and tested a trace element clean sampling device for long term deployment (6 months or longer) on deep-sea moorings. The device collects unfiltered 500 ml samples by opening and closing a bottle originally filled with dilute acid (passively replaced by denser seawater). Each sample is collected by an independent module, so failure of a single unit does not affect others. Seven years of deployments have refined the sampler into a rugged and reliable device. The device also can be hung below a wire to collect water column samples. Automated trace element sampler (ATE), a spinoff from moored in situ trace element serial sampler, is a single-module device for allowing trace metal clean near-surface samples to be collected by personnel not trained in trace element sampling. ATE/VANE, another variation, allows the same personnel to collect upper water column profiles on conventional hydrowire. The systems have been tested by comparing samples collected for lead and iron with those collected by previously proven sampling techniques.

  20. Dilute Oxygen Combustion - Phase 3 Report

    SciTech Connect

    Riley, Michael F.

    2000-05-31

    Dilute Oxygen Combustion (DOC) burners have been successfully installed and operated in the reheat furnace at Auburn Steel Co., Inc., Auburn, NY, under Phase 3 of the Dilute Oxygen Combustion project. Two new preheat zones were created employing a total of eight 6.5 MMBtu/hr capacity burners. The preheat zones provide a 30 percent increase in maximum furnace production rate, from 75 tph to 100 tph. The fuel rate is essentially unchanged, with the fuel savings expected from oxy-fuel combustion being offset by higher flue gas temperatures. When allowance is made for the high nitrogen level and high gas phase temperature in the furnace, measured NOx emissions are in line with laboratory data on DOC burners developed in Phase 1 of the project. Burner performance has been good, and there have been no operating or maintenance problems. The DOC system continues to be used as part of Auburn Steel's standard reheat furnace practice. High gas phase temperature is a result of the high firing density needed to achieve high production rates, and little opportunity exists for improvement in that area. However, fuel and NOx performance can be improved by further conversion on furnace zones to DOC burners, which will lower furnace nitrogen levels. Major obstacles are cost and concern about increased formation of oxide scale on the steel. Oxide scale formation may be enhanced by exposure of the steel to higher concentrations of oxidizing gas components (primarily products of combustion) in the higher temperature zones of the furnace. Phase 4 of the DOC project will examine the rate of oxide scale formation in these higher temperature zones and develop countermeasures that will allow DOC burners to be used successfully in these furnace zones.

  1. Dilute Oxygen Combustion Phase 3 Final Report

    SciTech Connect

    Riley, M.F.; Ryan, H.M.

    2000-05-31

    Dilute Oxygen Combustion (DOC) burners have been successfully installed and operated in the reheat furnace at Auburn Steel Co., Inc., Auburn, NY, under Phase 3 of the Dilute Oxygen Combustion project. Two new preheat zones were created employing a total of eight 6.5 MMBtu/hr capacity burners. The preheat zones provide a 30 percent increase in maximum furnace production rate, from 75 tph to 100 tph. The fuel rate is essentially unchanged, with the fuel savings expected from oxy-fuel combustion being offset by higher flue gas temperatures. When allowance is made for the high nitrogen level and high gas phase temperature in the furnace, measured NOx emissions are in line with laboratory data on DOC burners developed in Phase 1 of the project. Burner performance has been good and there have been no operating or maintenance problems. The DOC system continues to be used as part of Auburn Steel?s standard reheat furnace practice. High gas phase temperature is a result of the high firing density needed to achieve high production rates, and little opportunity exists for improvement in that area. However, fuel and NOx performance can be improved by further conversion of furnace zones to DOC burners, which will lower furnace nitrogen levels. Major obstacles are cost and concern about increased formation of oxide scale on the steel. Oxide scale formation may be enhanced by exposure of the steel to higher concentrations of oxidizing gas components (primarily products of combustion) in the higher temperature zones of the furnace. Phase 4 of the DOC project will examine the rate of oxide scale formation in these higher temperature zones and develop countermeasures that will allow DOC burners to be used successfully in these furnace zones.

  2. Picture Detection in Rapid Serial Visual Presentation: Features or Identity?

    ERIC Educational Resources Information Center

    Potter, Mary C.; Wyble, Brad; Pandav, Rijuta; Olejarczyk, Jennifer

    2010-01-01

    A pictured object can be readily detected in a rapid serial visual presentation sequence when the target is specified by a superordinate category name such as "animal" or "vehicle". Are category features the initial basis for detection, with identification of the specific object occurring in a second stage (Evans & Treisman, 2005), or is…

  3. 10 CFR 32.201 - Serialization of nationally tracked sources.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Serialization of nationally tracked sources. 32.201 Section 32.201 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER... nationally tracked sources. Each licensee who manufactures a nationally tracked source after February 6,...

  4. Phonological Similarity in Serial Recall: Constraints on Theories of Memory

    ERIC Educational Resources Information Center

    Lewandowsky, Stephan; Farrell, Simon

    2008-01-01

    In short-term serial recall, similar-sounding items are remembered more poorly than items that do not sound alike. When lists mix similar and dissimilar items, performance on the dissimilar items is of considerable theoretical interest. Farrell and Lewandowsky [Farrell, S., & Lewandowsky, S. (2003). Dissimilar items benefit from phonological…

  5. Auditory Word Serial Recall Benefits from Orthographic Dissimilarity

    ERIC Educational Resources Information Center

    Pattamadilok, Chotiga; Lafontaine, Helene; Morais, Jose; Kolinsky, Regine

    2010-01-01

    The influence of orthographic knowledge has been consistently observed in speech recognition and metaphonological tasks. The present study provides data suggesting that such influence also pervades other cognitive domains related to language abilities, such as verbal working memory. Using serial recall of auditory seven-word lists, we observed…

  6. The Primacy Model: A New Model of Immediate Serial Recall.

    ERIC Educational Resources Information Center

    Page, Michael P. A.; Norris, Dennis

    1998-01-01

    The primacy model is presented as a new model of serial recall. This model stores order information by means of the assumption that the strength of activation of successive list items decreases across list position to form a primary gradient. The model produces accurate simulation of the effects of word length, list length, and phonological…

  7. Modelling Transposition Latencies: Constraints for Theories of Serial Order Memory

    ERIC Educational Resources Information Center

    Farrell, Simon; Lewandowsky, Stephan

    2004-01-01

    Several competing theories of short-term memory can explain serial recall performance at a quantitative level. However, most theories to date have not been applied to the accompanying pattern of response latencies, thus ignoring a rich and highly diagnostic aspect of performance. This article explores and tests the error latency predictions of…

  8. Whole-pattern fitting technique in serial femtosecond nanocrystallography

    PubMed Central

    Dilanian, Ruben A.; Williams, Sophie R.; Martin, Andrew V.; Streltsov, Victor A.; Quiney, Harry M.

    2016-01-01

    Serial femtosecond X-ray crystallography (SFX) has created new opportunities in the field of structural analysis of protein nanocrystals. The intensity and timescale characteristics of the X-ray free-electron laser sources used in SFX experiments necessitate the analysis of a large collection of individual crystals of variable shape and quality to ultimately solve a single, average crystal structure. Ensembles of crystals are commonly encountered in powder diffraction, but serial crystallography is different because each crystal is measured individually and can be oriented via indexing and merged into a three-dimensional data set, as is done for conventional crystallography data. In this way, serial femtosecond crystallography data lie in between conventional crystallography data and powder diffraction data, sharing features of both. The extremely small sizes of nanocrystals, as well as the possible imperfections of their crystallite structure, significantly affect the diffraction pattern and raise the question of how best to extract accurate structure-factor moduli from serial crystallography data. Here it is demonstrated that whole-pattern fitting techniques established for one-dimensional powder diffraction analysis can be feasibly extended to higher dimensions for the analysis of merged SFX diffraction data. It is shown that for very small crystals, whole-pattern fitting methods are more accurate than Monte Carlo integration methods that are currently used. PMID:27006776

  9. When Temporal Isolation Benefits Memory for Serial Order

    ERIC Educational Resources Information Center

    Lewandowsky, Stephan; Nimmo, Lisa M.; Brown, Gordon D. A.

    2008-01-01

    According to temporal distinctiveness models, items that are temporally isolated from their neighbors during list presentation are more distinct and thus should be recalled better. Contrary to that expectation of distinctiveness views, much recent evidence has shown that forward short-term serial recall is unaffected by temporal isolation. We…

  10. Mixed-List Phonological Similarity Effects in Delayed Serial Recall

    ERIC Educational Resources Information Center

    Farrell, Simon

    2006-01-01

    Recent experiments have shown that placing dissimilar items on lists of phonologically similar items enhances accuracy of ordered recall of the dissimilar items [Farrell, S., & Lewandowsky, S. (2003). Dissimilar items benefit from phonological similarity in serial recall. "Journal of Experimental Psychology: Learning, Memory, and Cognition," 29,…

  11. Serials Pricing and the Role of the Electronic Journal.

    ERIC Educational Resources Information Center

    Metz, Paul; Gherman, Paul M.

    1991-01-01

    This third in a series of articles on scholarly communications and serials prices focuses on the possible role of electronic journals. Highlights include the increase in scientific and scholarly productivity; price differentials between private and for-profit journals; publisher's costs and profits; copyright issues; and the role of libraries and…

  12. Serial Killers: Academic Libraries Respond to Soaring Costs.

    ERIC Educational Resources Information Center

    McCarthy, Paul

    1994-01-01

    Discusses ways in which academic libraries are responding to rising costs of serials. Topics addressed include pricing by publishers; the effect of journal cancellations on research activities; interlibrary loans and document delivery services; coordinated cancelling; electronic journals; and experiences at the University of Arizona. (LRW)

  13. Child serial murder-psychodynamics: closely watched shadows.

    PubMed

    Turco, R

    2001-01-01

    There is a malignant transformation in object relations resulting in an identification with an omnipotent and cruel object resulting in an identity transformation. If the tension, desperation, and dissociation increase, serial murder becomes spree murder. The presence of pathological narcissism and psychopathic tendencies are of diagnostic significance in understanding the murderer's personality functioning and motivation to kill. Meloy (1988) considered the degree of sadism and aggression combined with narcissistic qualities to reflect the "malignancy" of the psychopathic disturbance where gratification (of aggression) occurs in the service of narcissistic functioning--that is, cruelty toward others in the form of a triumphant victory over a rejecting object. Meloy also believes that dissociation is ubiquitious in the psychopath. The initial murder of the serial murderer may reflect a "new identity." The pathological object-relations of narcissism and the malignant narcissism are important diagnostic indicators in the personality functioning of serial killers and the occurrence of these phenomena is a significant factor in the formation of the personalities of serial killers, their inner motivations, and their pattern of commission.

  14. Union List of Serials in Pacific Island Libraries.

    ERIC Educational Resources Information Center

    Cohen, Arlene G., Comp.; Yoshida, Patricia, Comp.

    This union list contains the serial holdings from Pacific Island libraries, including the University of the South Pacific Library (Fiji), the University of Guam Robert F. Kennedy Library, Guam Public Library, College of Micronesia-FSM Library, College of the Marshall Islands Library, Micronesian Seminar Library, Palau Community College Library,…

  15. Guidelines for the Compilation of Union Catalogues of Serials.

    ERIC Educational Resources Information Center

    International Federation of Library Associations and Institutions, London (England).

    Intended for use in countries planning the establishment of new union catalogs, as well as in countries with long established traditions of library resource sharing, this document provides guiding principles and outlines standard methods and practices for the compilation of union catalogs of serials. Following definitions of relevant terminology…

  16. Prior-List Intrusions in Serial Recall Are Positional

    ERIC Educational Resources Information Center

    Osth, Adam F.; Dennis, Simon

    2015-01-01

    Henson (1996) provided a number of demonstrations of error patterns in serial recall that contradict chaining models. One such error pattern concerned when participants make intrusions from prior lists: Rather than originating from random positions in the prior list, intrusions tend to be recalled in the same position as their position in the…

  17. Nymphalid eyespot serial homologues originate as a few individualized modules.

    PubMed

    Oliver, Jeffrey C; Beaulieu, Jeremy M; Gall, Lawrence F; Piel, William H; Monteiro, Antónia

    2014-07-22

    Serial homologues are repeated traits that share similar development but occur in different parts of the body. Variation in number of repeats accounts for substantial diversity in animal form and considerable work has focused on identifying the factors accounting for this variation. Little is known, however, about how serial homologues originally become repeated, or about the relative timing of repeat individuation relative to repeat origin. Here, we show that the serially repeated eyespots on nymphalid butterfly wings most likely arose as a small cluster of units on the ventral hindwing that were later co-opted to the dorsal and anterior wing surfaces. Based on comparative analyses of over 400 species, we found support for a model of eyespot origin followed by redeployment, rather than by the conventional model, where eyespots arose as a complete row of undifferentiated units that later gained individuation. In addition, eyespots most likely evolved from simpler pattern elements, single-coloured spots, which were already individuated among different wing sectors. Finally, the late appearance of eyespots on the dorsal, hidden wing surface further suggests that these novel complex traits originally evolved for one function (thwarting predator attacks) and acquired a second function (sexual signalling) when moved to a different body location. This broad comparative analysis illustrates how serial homologues may initially evolve as a few units serving a particular function and subsequently become repeated in novel body locations with new functions. PMID:24870037

  18. Fitting a Serial Correlation Pattern to Repeated Observations.

    ERIC Educational Resources Information Center

    Edwards, Lynne K.

    1991-01-01

    When repeated observations are taken at equal time intervals, a simple form of a stationary time series structure may be fitted to the observations. Use of correction factors is discussed. A computer simulation method is used to investigate power advantages of fitting a serial correlation pattern to repeated observations. (TJH)

  19. Analysis of aging in lager brewing yeast during serial repitching.

    PubMed

    Bühligen, Franziska; Lindner, Patrick; Fetzer, Ingo; Stahl, Frank; Scheper, Thomas; Harms, Hauke; Müller, Susann

    2014-10-10

    Serial repitching of brewing yeast inoculates is an important economic factor in the brewing industry, as their propagation is time and resource intensive. Here, we investigated whether replicative aging and/or the population distribution status changed during serial repitching in three different breweries with the same brewing yeast strain but different abiotic backgrounds and repitching regimes with varying numbers of reuses. Next to bud scar numbers the DNA content of the Saccharomyces pastorianus HEBRU cells was analyzed. Gene expression patterns were investigated using low-density microarrays with genes for aging, stress, storage compound metabolism and cell cycle. Two breweries showed a stable rejuvenation rate during serial repitching. In a third brewery the fraction of virgin cells varied, which could be explained with differing wort aeration rates. Furthermore, the number of bud scars per cell and cell size correlated in all 3 breweries throughout all runs. Transcriptome analyses revealed that from the 6th run on, mainly for the cells positive gene expression could be seen, for example up-regulation of trehalose and glycogen metabolism genes. Additionally, the cells' settling in the cone was dependent on cell size, with the lowest and the uppermost cone layers showing the highest amount of dead cells. In general, cells do not progressively age during extended serial repitching. PMID:25026460

  20. 10 CFR 32.201 - Serialization of nationally tracked sources.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Serialization of nationally tracked sources. 32.201 Section 32.201 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER... nationally tracked sources. Each licensee who manufactures a nationally tracked source after February 6,...

  1. Process to restore obliterated serial numbers on metal surfaces

    NASA Technical Reports Server (NTRS)

    Young, S. G.; Parker, B.; Chisum, W. J.

    1974-01-01

    Metal smeared into grooves of serial numbers by grinding or filing can be cleaned out by process called cavitation. Ultrasonic vibrator generates very high frequency vibrations in water which create millions of microscopic bubbles. Cavitation bubbles impact metal surface at thousands of pounds per square inch pressure. Metal particles filling grooves are broken away.

  2. Counterbalancing for Serial Order Carryover Effects in Experimental Condition Orders

    ERIC Educational Resources Information Center

    Brooks, Joseph L.

    2012-01-01

    Reactions of neural, psychological, and social systems are rarely, if ever, independent of previous inputs and states. The potential for serial order carryover effects from one condition to the next in a sequence of experimental trials makes counterbalancing of condition order an essential part of experimental design. Here, a method is proposed…

  3. 27 CFR 24.260 - Serial numbers or filling date.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Serial numbers or filling date. 24.260 Section 24.260 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine...

  4. 27 CFR 24.260 - Serial numbers or filling date.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Serial numbers or filling date. 24.260 Section 24.260 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine...

  5. Child serial murder-psychodynamics: closely watched shadows.

    PubMed

    Turco, R

    2001-01-01

    There is a malignant transformation in object relations resulting in an identification with an omnipotent and cruel object resulting in an identity transformation. If the tension, desperation, and dissociation increase, serial murder becomes spree murder. The presence of pathological narcissism and psychopathic tendencies are of diagnostic significance in understanding the murderer's personality functioning and motivation to kill. Meloy (1988) considered the degree of sadism and aggression combined with narcissistic qualities to reflect the "malignancy" of the psychopathic disturbance where gratification (of aggression) occurs in the service of narcissistic functioning--that is, cruelty toward others in the form of a triumphant victory over a rejecting object. Meloy also believes that dissociation is ubiquitious in the psychopath. The initial murder of the serial murderer may reflect a "new identity." The pathological object-relations of narcissism and the malignant narcissism are important diagnostic indicators in the personality functioning of serial killers and the occurrence of these phenomena is a significant factor in the formation of the personalities of serial killers, their inner motivations, and their pattern of commission. PMID:11685995

  6. Forensic sexology: paraphilic serial rape (biastophilia) and lust murder (erotophonophilia).

    PubMed

    Money, J

    1990-01-01

    Forensic sexology is not synonymous with either forensic psychiatry or forensic psychology. It is a specialty in its own right, and is needed in the courtroom. Paraphilic sex offenders on trial are misrepresented as being, by their own choice, psychopathic or sociopathic deviates. They are unable to explain their paraphilic criminality to either themselves or society. In a case of serial rape and serial lust murder here presented, the contributory causes are examined and differentiated as hereditary predisposition, hormonal functioning; pathological relationships, sexual abuse; and syndrome overlap with bipolar disorder, schizoid disorder, antisocial personality disorder, epilepsy, and multiple personality. The precipitating causes were differentiated as childhood head injuries, and adult head injury at age 20. Left impact trauma and sexological trauma were sequelae of the adult injury. The full range of diagnostic resources was not available for a prisoner on death row. Capital punishment has not prevented the reemergence in each new generation of serial rape and serial lust murder as an epidemiological, public health problem. Punishment is an ineffectual substitute for epidemiological research into cause, effect, and prevention.

  7. Serials Standards in Convergence: ISBD(S) Developments.

    ERIC Educational Resources Information Center

    Parent, Ingrid

    This paper provides an update on the revision process undertaken to produce a new, relevant, and useful ISBD(S) (International Standard Bibliographic Description) standard for describing serial publications in both print and electronic formats. Highlights include: the concept of "integrating resource," i.e., a bibliographic resource that is added…

  8. Dyslexia: The Effects of Visual Memory and Serial Recall.

    ERIC Educational Resources Information Center

    McIntyre, Thomas C.

    Research on the role of visual memory and serial recall in dyslexia is reviewed. Findings touch on feature theory, which proposes that information is held in the form of "features," and that students for example learn to discriminate letters by marking certain identifiable aspects. Other studies are described which focus on speed of processing…

  9. Nymphalid eyespot serial homologues originate as a few individualized modules.

    PubMed

    Oliver, Jeffrey C; Beaulieu, Jeremy M; Gall, Lawrence F; Piel, William H; Monteiro, Antónia

    2014-07-22

    Serial homologues are repeated traits that share similar development but occur in different parts of the body. Variation in number of repeats accounts for substantial diversity in animal form and considerable work has focused on identifying the factors accounting for this variation. Little is known, however, about how serial homologues originally become repeated, or about the relative timing of repeat individuation relative to repeat origin. Here, we show that the serially repeated eyespots on nymphalid butterfly wings most likely arose as a small cluster of units on the ventral hindwing that were later co-opted to the dorsal and anterior wing surfaces. Based on comparative analyses of over 400 species, we found support for a model of eyespot origin followed by redeployment, rather than by the conventional model, where eyespots arose as a complete row of undifferentiated units that later gained individuation. In addition, eyespots most likely evolved from simpler pattern elements, single-coloured spots, which were already individuated among different wing sectors. Finally, the late appearance of eyespots on the dorsal, hidden wing surface further suggests that these novel complex traits originally evolved for one function (thwarting predator attacks) and acquired a second function (sexual signalling) when moved to a different body location. This broad comparative analysis illustrates how serial homologues may initially evolve as a few units serving a particular function and subsequently become repeated in novel body locations with new functions.

  10. Serial Back-Plane Technologies in Advanced Avionics Architectures

    NASA Technical Reports Server (NTRS)

    Varnavas, Kosta

    2005-01-01

    Current back plane technologies such as VME, and current personal computer back planes such as PCI, are shared bus systems that can exhibit nondeterministic latencies. This means a card can take control of the bus and use resources indefinitely affecting the ability of other cards in the back plane to acquire the bus. This provides a real hit on the reliability of the system. Additionally, these parallel busses only have bandwidths in the 100s of megahertz range and EMI and noise effects get worse the higher the bandwidth goes. To provide scalable, fault-tolerant, advanced computing systems, more applicable to today s connected computing environment and to better meet the needs of future requirements for advanced space instruments and vehicles, serial back-plane technologies should be implemented in advanced avionics architectures. Serial backplane technologies eliminate the problem of one card getting the bus and never relinquishing it, or one minor problem on the backplane bringing the whole system down. Being serial instead of parallel improves the reliability by reducing many of the signal integrity issues associated with parallel back planes and thus significantly improves reliability. The increased speeds associated with a serial backplane are an added bonus.

  11. Nymphalid eyespot serial homologues originate as a few individualized modules

    PubMed Central

    Oliver, Jeffrey C.; Beaulieu, Jeremy M.; Gall, Lawrence F.; Piel, William H.; Monteiro, Antónia

    2014-01-01

    Serial homologues are repeated traits that share similar development but occur in different parts of the body. Variation in number of repeats accounts for substantial diversity in animal form and considerable work has focused on identifying the factors accounting for this variation. Little is known, however, about how serial homologues originally become repeated, or about the relative timing of repeat individuation relative to repeat origin. Here, we show that the serially repeated eyespots on nymphalid butterfly wings most likely arose as a small cluster of units on the ventral hindwing that were later co-opted to the dorsal and anterior wing surfaces. Based on comparative analyses of over 400 species, we found support for a model of eyespot origin followed by redeployment, rather than by the conventional model, where eyespots arose as a complete row of undifferentiated units that later gained individuation. In addition, eyespots most likely evolved from simpler pattern elements, single-coloured spots, which were already individuated among different wing sectors. Finally, the late appearance of eyespots on the dorsal, hidden wing surface further suggests that these novel complex traits originally evolved for one function (thwarting predator attacks) and acquired a second function (sexual signalling) when moved to a different body location. This broad comparative analysis illustrates how serial homologues may initially evolve as a few units serving a particular function and subsequently become repeated in novel body locations with new functions. PMID:24870037

  12. Building a Virtual National Serials Collection Using the MEADS System.

    ERIC Educational Resources Information Center

    Lim, Edward

    1998-01-01

    The Australian university system can fund the creation of a scholarly collection of serials for use by the nation by increasing the average expenditure on libraries from 5.1% to 5.3% of total university expenditure. Once the national collection has been built, virtual access can be provided using a Web-based model called MEADS (Monash Electronic…

  13. Kiondo Bag Boutique: A Serial Case for Introductory Financial Accounting

    ERIC Educational Resources Information Center

    Siriwardane, Harshini P.

    2014-01-01

    Kiondo Bag Boutique is a hypothetical serial case involving a start-up retail business. The case evolves from an ambitious business idea to a successful business. Through the evolving business, the importance of accounting information is highlighted. Different iterations are used to illustrate the role of accounting in serving and managing…

  14. Reconstruct: a free editor for serial section microscopy.

    PubMed

    Fiala, J C

    2005-04-01

    Many microscopy studies require reconstruction from serial sections, a method of analysis that is sometimes difficult and time-consuming. When each section is cut, mounted and imaged separately, section images must be montaged and realigned to accurately analyse and visualize the three-dimensional (3D) structure. Reconstruct is a free editor designed to facilitate montaging, alignment, analysis and visualization of serial sections. The methods used by Reconstruct for organizing, transforming and displaying data enable the analysis of series with large numbers of sections and images over a large range of magnifications by making efficient use of computer memory. Alignments can correct for some types of non-linear deformations, including cracks and folds, as often encountered in serial electron microscopy. A large number of different structures can be easily traced and placed together in a single 3D scene that can be animated or saved. As a flexible editor, Reconstruct can reduce the time and resources expended for serial section studies and allows a larger tissue volume to be analysed more quickly.

  15. INTERPRETATIONS OF ELECTRON MICROGRAPHS OF SINGLE AND SERIAL SECTIONS

    PubMed Central

    Williams, Robley C.; Kallman, Frances

    1955-01-01

    A method of securing serial sections for electron microscopy is described. Serial sections present certain anomalies of interpretation of a nature such that a complete and detailed three-dimensional reconstruction of the sectioned tissue cannot be made. These anomalies are discussed, as well as those which have been encountered in the interpretation of single sections. Observations of the following kinds have been made in an attempt to elucidate the interpretation of single and serial sections: differing methods of mounting adjacent sections, observation of the same section by high-angle stereoscopy, and examination of sections which have been shadowed prior to and subsequent to electron microscopy. It is found that the appearance of sections is independent of the choice of side to be placed against the formvar films. Stereoscopy shows that the appearance of fine structures is strongly dependent upon the direction of the penetrating electron beam with respect to the plane of the structures. Stereoscopy, combined with shadowing, shows quantitatively that extensive sublimation of polymer occurs upon normal exposure in the electron microscope. Observation of sections shadowed prior to electron microscopy indicates that varying amounts of material are removed between sections by the action of microtomy; i.e., it is probable that the sum of the thicknesses of several serial sections is considerably less than the total thickness of material removed from the block. It is believed that this effect, combined with the effect of sublimation, aids in explaining the failure of adjacent sections to exhibit continuity in their detailed structures. PMID:13242595

  16. Problems of the National Library of Medicine Classification for Serials

    ERIC Educational Resources Information Center

    Sophanodorn, Kanchana

    1971-01-01

    A brief history of the development of serial classification patterns from the National Library of Medicine scheme is followed by the enumeration of some of the difficulties encountered by medical libraries attempting to use the scheme. Solutions to the problems utilized by five large medical libraries are described in detail. (6 references)…

  17. Dilute acid/metal salt hydrolysis of lignocellulosics

    DOEpatents

    Nguyen, Quang A.; Tucker, Melvin P.

    2002-01-01

    A modified dilute acid method of hydrolyzing the cellulose and hemicellulose in lignocellulosic material under conditions to obtain higher overall fermentable sugar yields than is obtainable using dilute acid alone, comprising: impregnating a lignocellulosic feedstock with a mixture of an amount of aqueous solution of a dilute acid catalyst and a metal salt catalyst sufficient to provide higher overall fermentable sugar yields than is obtainable when hydrolyzing with dilute acid alone; loading the impregnated lignocellulosic feedstock into a reactor and heating for a sufficient period of time to hydrolyze substantially all of the hemicellulose and greater than 45% of the cellulose to water soluble sugars; and recovering the water soluble sugars.

  18. Overlap amplitude and localization properties in aperiodic diluted and non-diluted direct electric transmission lines

    NASA Astrophysics Data System (ADS)

    Lazo, E.; Castro, C. E.; Cortés-Cortés, F.

    2016-09-01

    In this work we study the relationship existing between the localization properties of the diluted and non-diluted direct electrical transmission lines with the overlap amplitude Cijω = 2 | Iiω Ijω | , where Ijω is the amplitude of the electric current function at jth cell of the transmission line for the state with frequency ω. We distribute two values of inductances LA and LB, according to the generalized aperiodic Thue-Morse m-tupling sequence. We find that the behavior of Ci,jω is directly related to the localization properties of the aperiodic sequences measured by the ξ normalized participation number, the Rq Rényi entropies and the μq moments. In addition, we generalize the scaling relationship for the overlap amplitude Ci,jω, i.e., <(Ci,jω) 2 q > =(2/N) 2 q.

  19. Serials Management in the Electronic Era: Papers in Honor of Peter Gellatly, Founding Editor of "The Serials Librarian."

    ERIC Educational Resources Information Center

    Cole, Jim, Ed.; Williams, James W., Ed.

    This book assesses progress and technical changes in the field of serials management and anticipates future directions and challenges for librarians. The book consists of 18 chapters: (1) "Introduction" (Jim Cole and James W. Williams); (2) "Peter Gellatly--Editor with a Deft Touch" (Ruth C. Carter); (3) "The "Deseret News" Web Edition" (Stewart…

  20. Adolescent exposure to methylphenidate impairs serial pattern learning in the serial multiple choice (SMC) task in adult rats.

    PubMed

    Rowan, James D; McCarty, Madison K; Kundey, Shannon M A; Osburn, Crystal D; Renaud, Samantha M; Kelley, Brian M; Matoushek, Amanda Willey; Fountain, Stephen B

    2015-01-01

    The long-term effects of adolescent exposure to methylphenidate (MPD) on adult cognitive capacity are largely unknown. We utilized a serial multiple choice (SMC) task, which is a sequential learning paradigm for studying complex learning, to observe the effects of methylphenidate exposure during adolescence on later serial pattern acquisition during adulthood. Following 20.0mg/kg/day MPD or saline exposure for 5 days/week for 5 weeks during adolescence, male rats were trained to produce a highly structured serial response pattern in an octagonal operant chamber for water reinforcement as adults. During a transfer phase, a violation to the previously-learned pattern structure was introduced as the last element of the sequential pattern. Results indicated that while rats in both groups were able to learn the training and transfer patterns, adolescent exposure to MPD impaired learning for some aspects of pattern learning in the training phase which are learned using discrimination learning or serial position learning. In contrast adolescent exposure to MPD had no effect on other aspects of pattern learning which have been shown to tap into rule learning mechanisms. Additionally, adolescent MPD exposure impaired learning for the violation element in the transfer phase. This indicates a deficit in multi-item learning previously shown to be responsible for violation element learning. Thus, these results clearly show that adolescent MPD produced multiple cognitive impairments in male rats that persisted into adulthood long after MPD exposure ended.

  1. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2006-02-01

    There are many fractured carbonate reservoirs in US (and the world) with light oil. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). The process of using dilute anionic surfactants in alkaline solutions has been investigated in this work for oil recovery from fractured oil-wet carbonate reservoirs both experimentally and numerically. This process is a surfactant-aided gravity drainage where surfactant diffuses into the matrix, lowers IFT and contact angle, which decrease capillary pressure and increase oil relative permeability enabling gravity to drain the oil up. Anionic surfactants have been identified which at dilute concentration of 0.05 wt% and optimal salinity can lower the interfacial tension and change the wettability of the calcite surface to intermediate/water-wet condition as well or better than the cationic surfactant DTAB with a West Texas crude oil. The force of adhesion in AFM of oil-wet regions changes after anionic surfactant treatment to values similar to those of water-wet regions. The AFM topography images showed that the oil-wetting material was removed from the surface by the anionic surfactant treatment. Adsorption studies indicate that the extent of adsorption for anionic surfactants on calcite minerals decreases with increase in pH and with decrease in salinity. Surfactant adsorption can be minimized in the presence of Na{sub 2}CO{sub 3}. Laboratory-scale surfactant brine imbibition experiments give high oil recovery (20-42% OOIP in 50 days; up to 60% in 200 days) for initially oil-wet cores through wettability alteration and IFT reduction. Small (<10%) initial gas saturation does not affect significantly the rate of oil recovery in the imbibition process, but larger gas saturation decreases the oil recovery rate. As the core permeability decreases, the rate of oil recovery reduces

  2. 9 CFR 114.14 - Extension of expiration date for a serial or subserial.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... PRODUCTION REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.14 Extension of expiration date for a serial or... allowed in the filed Outline of Production. (1) Serials are approved for redating under the condition that... serial or subserial. 114.14 Section 114.14 Animals and Animal Products ANIMAL AND PLANT HEALTH...

  3. 9 CFR 114.14 - Extension of expiration date for a serial or subserial.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... PRODUCTION REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.14 Extension of expiration date for a serial or... allowed in the filed Outline of Production. (1) Serials are approved for redating under the condition that... serial or subserial. 114.14 Section 114.14 Animals and Animal Products ANIMAL AND PLANT HEALTH...

  4. Long-Term Phonological Knowledge Supports Serial Ordering in Working Memory

    ERIC Educational Resources Information Center

    Nakayama, Masataka; Tanida, Yuki; Saito, Satoru

    2015-01-01

    Serial ordering mechanisms have been investigated extensively in psychology and psycholinguistics. It has also been demonstrated repeatedly that long-term phonological knowledge contributes to serial ordering. However, the mechanisms that contribute to serial ordering have yet to be fully understood. To understand these mechanisms, we demonstrate…

  5. A SERIALS DATA PROGRAM FOR SCIENCE AND TECHNOLOGY, RESULTS OF A FEASIBILITY STUDY. FINAL REPORT.

    ERIC Educational Resources Information Center

    CREAGER, WILLIAM A.; SPARKS, DAVID E.

    THIS REPORT PRESENTS THE RESULTS OF A STUDY OF THE FEASIBILITY OF ESTABLISHING A CONTINUING NATIONAL INVENTORY OF THE WORLD'S SCIENTIFIC AND TECHNICAL SERIALS. THE MAJOR TECHNICAL, OPERATIONAL, AND ECONOMIC FACTORS INVOLVED IN THE IMPLEMENTATION AND OPERATION OF SUCH A SERIALS DATA PROGRAM HAVE BEEN EXAMINED. THE BASIC PARAMETERS OF A SERIALS DATA…

  6. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2004-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Anionic surfactants (SS-6656, Alfoterra 35, 38, 63,65,68) have been identified which can change the wettability of the calcite surface to intermediate/water-wet condition as well or better than the cationic surfactant DTAB with a West Texas crude oil in the presence of Na{sub 2}CO{sub 3}. All the carbonate surfaces (Lithographic Limestone, Marble, Dolomite and Calcite) show similar behavior with respect to wettability alteration with surfactant 4-22. Anionic surfactants (5-166, Alfoterra-33 and Alfoterra-38 and Alfoterra-68), which lower the interfacial tension with a West Texas crude oil to very low values (<10{sup -2} nM/m), have also been identified. Plans for the next quarter include conducting wettability, mobilization, and imbibition studies.

  7. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases IFT with a minimum at about 0.2 M. Addition of surfactant decreases IFT further. In the absence of surfactant the minerals are oil wet after aging with crude oil. Addition of surfactant solution decreases the contact angle to intermediate wettability. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Plans for the next quarter include conducting adsorption, phase behavior and wettability studies.

  8. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory imbibition tests show that imbibition rate is not very sensitive to the surfactant concentration (in the range of 0.05-0.2 wt%) and small amounts of trapped gas saturation. It is however very sensitive to oil permeability and water-oil-ratio. Less than 0.5 M Na2CO3 is needed for in situ soap generation and low adsorption; NaCl can be added to reach the necessary total salinity. The simulation result matches the laboratory imbibition experimental data. Small fracture spacing and high permeability would be needed for high rate of recovery.

  9. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior, interfacial tension (IFT) and wettability studies. Alfoterra-38 (0.05 wt%), Alfoterra-35 (0.05 wt%), SS-6656 (0.05 wt%), and DTAB (1 wt%) altered the wettability of the initially oil-wet calcite plate to an intermediate/water-wet state. Low IFT ({approx}10{sup -3} dynes/cm) is obtained with surfactants 5-166, Alfoterra-33 and Alfoterra-38. Plans for the next quarter include conducting wettability and mobilization studies.

  10. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2004-03-31

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Anionic surfactants (Alfoterra 35, 38) recover more than 40% of the oil in about 50 days by imbibition driven by wettability alteration in the core-scale. Anionic surfactant, Alfoterra-68, recovers about 28% of the oil by lower tension aided gravity-driven imbibition in the core-scale. Residual oil saturation showed little capillary number dependence between 10{sup -5} and 10{sup -2}. Wettability alteration increases as the number of ethoxy groups increases in ethoxy sulfate surfactants. Plans for the next quarter include conducting mobilization, and imbibition studies.

  11. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2004-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Simulation studies indicate that both wettability alteration and gravity-driven flow play significant role in oil recovery from fractured carbonates. Anionic surfactants (Alfoterra 35, 38) recover about 55% of the oil in about 150 days by imbibition driven by wettability alteration and low tension in the core-scale. Anionic surfactant, Alfoterra-68, recovers about 40% of the oil by lower tension aided gravity-driven imbibition in the core-scale. Cationic surfactant, DTAB recovers about 35% of the oil. Plans for the next quarter include conducting simulation and imbibition studies.

  12. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Imbibition in an originally oil-wet 2D capillary is the fastest in the case of Alf-38 and slowest in the case of DTAB (among the surfactants studied). Force of adhesion studies and contact angle measurements show that greater wettability alteration is possible with these anionic surfactants than the cationic surfactant studied. The water imbibition rate does not increase monotonically with an increase in the surfactant concentration. A numerical model has been developed that fits the rate of imbibition. Plans for the next quarter include conducting simulation and imbibition studies.

  13. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have acquired field oil and core samples and field brine compositions from Marathon. We have conducted preliminary adsorption and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Receding contact angles increase with surfactant adsorption. Plans for the next quarter include conducting adsorption, phase behavior and wettability studies.

  14. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior, interfacial tension (IFT) and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases IFT with a minimum at about 0.2 M. Addition of surfactant decreases IFT further. In the absence of surfactant the minerals are oil-wet after aging with crude oil. Addition of surfactant solution decreases the contact angle to intermediate-wet for many surfactants and water-wet for one surfactant. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Plans for the next quarter include conducting core adsorption, phase behavior, wettability and mobilization studies.

  15. Chain Dynamics in a Dilute Magnetorheological Fluid

    NASA Technical Reports Server (NTRS)

    Liu, Jing; Hagenbuchle, Martin

    1996-01-01

    The structure, formation, and dynamics of dilute, mono-dispersive ferrofluid emulsions in an external magnetic field have been investigated using dynamic light scattering techniques. In the absence of the magnetic field, the emulsion particles are randomly distributed and behave like hard spheres in Brownian motion. An applied magnetic field induces a magnetic dipole moment in each particle. Dipolar interactions between particles align them into chains where correlation functions show two decay processes. The short-time decay shows the motion of straight chains as a whole where the apparent chain length increases with the applied magnetic field and the particle volume fraction. Good scaling results are obtained showing that the apparent chain length grows with time following a power law with exponent of 0.6 and depends on the applied field, particle volume fraction, and diffusion constant of the particles. The long-time decay in the correlation function shows oscillation when the chains reach a certain length with time and stiffness with threshold field This result shows that chains not only fluctuate, but move in a periodic motion with a frequency of 364 Hz at lambda = 15. It may suggest the existence of phonons. This work is the first step in the understanding of the structure formation, especially chain coarsening mechanism, of magnetorheological (MR) fluids at higher volume fractions.

  16. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2005-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the best hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory-scale surfactant brine imbibition experiments give high oil recovery (35-62% OOIP) for initially oil-wet cores through wettability alteration and IFT reduction. Core-scale simulation results match those of the experiments. Initial capillarity-driven imbibition gives way to a final gravity-driven process. As the matrix block height increases, surfactant alters wettability to a lesser degree, or permeability decreases, oil production rate decreases. The scale-up to field scale will be further studied in the next quarter.

  17. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-04-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory imbibition tests show about 61% oil recovery in the case of Alf-38 and 37% in the case of DTAB. A numerical model has been developed that fits the rate of imbibition of the laboratory experiment. Field-scale fracture block simulation shows that as the fracture spacing increases, so does the time of recovery. Plans for the next quarter include simulation studies.

  18. Understanding Mental Models of Dilution in Thai Students

    ERIC Educational Resources Information Center

    Jansoon, Ninna; Coll, Richard K.; Somsook, Ekasith

    2009-01-01

    The purpose of this study was to investigate Thai students' understanding of dilution and related concepts. The literature suggests that a complete understanding of chemistry concepts such as dilution entails understanding of and the ability to integrate mental models across three levels of representation: the macroscopic, sub-microscopic and…

  19. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Dilution air background...

  20. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Dilution air background...

  1. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Dilution air background...

  2. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Dilution air background...

  3. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Dilution air background...

  4. Effects of dilution on vehicle emissions of primary particles

    NASA Astrophysics Data System (ADS)

    Hayden, K. L.; Li, S.; Liggio, G.; McCurdy, M.; Chan, T.; Rostkowski, J.

    2009-12-01

    Dilution of primary aerosols from vehicles into the ambient atmosphere can change their physical and chemical characteristics. In order to study these processes, experiments were conducted in an engine testing facility at Environment Canada in Ottawa, Ontario. Exhaust from a light duty diesel engine was vented into a constant volume sampling (CVS) system where it underwent primary dilution at an ambient temperature of 25oC, leading to a primary dilution ratio of 10-15. From the CVS, the exhaust was further diluted using a combination of a Dekati ejection diluter and mixing with zero air in a flow tube, achieving secondary dilution ratios of up to 3000. Particle and gas measurements were made through multi-ports in the CVS and the flow tube using an SMPS, FMPS, AMS, and SP2, and instruments to measure CO, CO2, NOx, and total hydrocarbons (THC). Preliminary results indicate that regardless of dilution ratios, primary particles contain significant amounts of organic material that appear to reside on small black carbon cores. With increasing dilution ratios, the primary particle sizes become progressively smaller, suggesting volatilization of the adsorbed organic material. Results from various engine operating modes (simulating different driving conditions) will be presented.

  5. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  6. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  7. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  8. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  9. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  10. 33 CFR 154.824 - Inerting, enriching, and diluting systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Systems § 154.824 Inerting, enriching, and diluting systems. (a) A vapor control system which uses... vapor control system which uses an inerting, enriching, or diluting system must be equipped with a gas... the injection point; (c) A vapor control system that uses an inerting or enriching system may not...

  11. Efficacy comparison between simple mixed-dilution and simple mid-dilution on-line hemodiafiltration techniques: a crossover study.

    PubMed

    Susantitaphong, Paweena; Tiranathanagul, Khajohn; Katavetin, Pisut; Hanwiwatwong, Orawadee; Wittayalertpanya, Supeecha; Praditpornsilpa, Kearkiat; Tungsanga, Kriang; Eiam-Ong, Somchai

    2012-12-01

    Mid-dilution and mixed-dilution on-line hemodiafiltration (OL-HDF) techniques are innovated to overcome the limitations of two standard techniques including predilution and postdilution. Unfortunately, the head-to-head comparisons between these two novel techniques in the same study are still limited. Moreover, the original mid-dilution and mixed-dilution OL-HDF need special dialyzers and special machines. In the present study, simple mid-dilution and simple mixed-dilution OL-HDF were settled with the aim for clinical use in general hemodialysis (HD) centers. The efficacies of uremic toxins removal between both modalities were measured and compared. This prospective randomized crossover study was conducted on 12 stable HD patients undergoing simple mixed-dilution and simple mid-dilution OL-HDF techniques. HD prescriptions were similar in both techniques. The dialysis efficacies were determined by calculating small- (urea, creatinine, and phosphate) and middle-molecule (beta-2 microglobulin [β2M]) removal. Moreover, potential complications such as high transmembrane pressure (TMP) and protein loss were also observed. Simple mixed-dilution OL-HDF provided significantly greater clearances of urea, creatinine, and β2M when compared with the simple mid-dilution OL-HDF techniques. Phosphate clearances in both techniques were comparable. In addition, TMP and dialysate albumin loss were not different. There were no intradialytic complications in both techniques. Simple mixed-dilution OL-HDF could provide greater efficacy for small- and middle-molecule clearances and acceptable potential risks, while phosphate removal is comparable.

  12. Identification of cardiovascular dilution systems by contrast ultrasound.

    PubMed

    Mischi, Massimo; Jansen, Annemieke H M; Korsten, Hendrikus H M

    2007-03-01

    Indicator dilution techniques permit accurate measurements of important cardiovascular parameters, such as pulmonary blood volume (PBV) and ejection fraction (EF). However, their use is limited by the need for central catheterization. Contrast ultrasonography allows overcoming this problem. PBV and EF can be measured by a dilution system identification algorithm after detection of multiple dilution curves by an ultrasound scanner. In this paper, we present a system identification method that exploits the a priori knowledge on the dilution system and finds the optimum parameters for the parametric model representing the dilution system impulse response. No subsequent model interpolation is needed. Volume measurements show accurate in-vitro results and clinical feasibility, while 50 EF measurements in patients show a 0.88 correlation coefficient with echocardiographic biplane estimates. In conclusion, adding a priori knowledge to the system identification algorithm leads to increased accuracy and robustness of the method for PBV and EF measurements.

  13. [Some criminological and psychopathologic reflexions about serial crimes].

    PubMed

    Romi, Juan Carlos

    2011-01-01

    This article reviews the concept of serial crime, including murder as well as any action for the purpose of inflicting bodily harm upon any person. It characterizes three types of multi-murderers: serial killers, mass murderers, and spree killers. These offenders often have a specific (ritual) behavior that is idiosyncratic and repeated on each crime, which allows the psychological profiling of the murderer. Examples, a psychopathological background, and a description of both their criminal behavior and dynamics are provided for each of these criminals. They are further classified according to their different motivations: psychotic, prophetic or enlightened, pleasure, secondary or pecuniary profits, power or control. Finally, the author shares his personal experience over 20 years in the assessment of sexual offenders.

  14. Theoretical Positioning Accuracy for Serial and Parallel Kinematic Structure

    NASA Astrophysics Data System (ADS)

    Kurekova, Eva; Halaj, Martin; Omachelová, Milada; Martišovitš, Ilja

    2014-10-01

    Modern production machines employ complex kinematic structures that shall enhance their performance. As those machines are very sophisticated electro-mechanical structures, their design is time consuming and financially demanding. Therefore, designers search for new possibilities how to estimate future properties of the machine as early as in the design phase. The paper gives a brief introduction to the adoption of methodology of measurement uncertainties into the design of production machines. The adapted methodology enables to estimate the theoretical positioning accuracy of the machine end effector that is one of the important indicators of machine performance. Both serial and parallel kinematic structures are considered in the paper. Methodology and sample calculations of theoretical positioning accuracy are presented for serial kinematic structure (represented by advanced plasma cutting head) and parallel kinematic structure, represented by one specific design named Tricept.

  15. Serial position effects in social transmission of food preference.

    PubMed

    Juárez-Maldonado, C Edith; Ortega-Saavedra, Guadalupe; Huichan-Olivares, Francisco; Gómez-Romero, José; Cruz-Morales, Sara E; Arriaga-Ramírez, J C Pedro

    2006-11-01

    The serial position effect in Long-Evans rats was evaluated in two experiments. In Experiment 1, the effect in a group for which an interstimulus interval (ISI) was introduced between items in a list of demonstrators was compared with that in a group without an ISI. With an ISI, a recency effect was produced. In Experiment 2, a serial position effect group was compared with four groups in which either the distinctiveness or the context of the middle item was changed, relative to the items on either side of it. A von Restorff effect was produced when a rat from a different strain was used as a demonstrator in Position 2. The results for Experiment 1 are discussed in relation to interstimulus effects in monkeys and those for Experiment 2 with respect to changes in the physical properties of middle items.

  16. [Some criminological and psychopathologic reflexions about serial crimes].

    PubMed

    Romi, Juan Carlos

    2011-01-01

    This article reviews the concept of serial crime, including murder as well as any action for the purpose of inflicting bodily harm upon any person. It characterizes three types of multi-murderers: serial killers, mass murderers, and spree killers. These offenders often have a specific (ritual) behavior that is idiosyncratic and repeated on each crime, which allows the psychological profiling of the murderer. Examples, a psychopathological background, and a description of both their criminal behavior and dynamics are provided for each of these criminals. They are further classified according to their different motivations: psychotic, prophetic or enlightened, pleasure, secondary or pecuniary profits, power or control. Finally, the author shares his personal experience over 20 years in the assessment of sexual offenders. PMID:22091451

  17. Lipidic cubic phase serial millisecond crystallography using synchrotron radiation

    PubMed Central

    Nogly, Przemyslaw; James, Daniel; Wang, Dingjie; White, Thomas A.; Zatsepin, Nadia; Shilova, Anastasya; Nelson, Garrett; Liu, Haiguang; Johansson, Linda; Heymann, Michael; Jaeger, Kathrin; Metz, Markus; Wickstrand, Cecilia; Wu, Wenting; Båth, Petra; Berntsen, Peter; Oberthuer, Dominik; Panneels, Valerie; Cherezov, Vadim; Chapman, Henry; Schertler, Gebhard; Neutze, Richard; Spence, John; Moraes, Isabel; Burghammer, Manfred; Standfuss, Joerg; Weierstall, Uwe

    2015-01-01

    Lipidic cubic phases (LCPs) have emerged as successful matrixes for the crystallization of membrane proteins. Moreover, the viscous LCP also provides a highly effective delivery medium for serial femtosecond crystallography (SFX) at X-ray free-electron lasers (XFELs). Here, the adaptation of this technology to perform serial millisecond crystallography (SMX) at more widely available synchrotron microfocus beamlines is described. Compared with conventional microcrystallography, LCP-SMX eliminates the need for difficult handling of individual crystals and allows for data collection at room temperature. The technology is demonstrated by solving a structure of the light-driven proton-pump bacteriorhodopsin (bR) at a resolution of 2.4 Å. The room-temperature structure of bR is very similar to previous cryogenic structures but shows small yet distinct differences in the retinal ligand and proton-transfer pathway. PMID:25866654

  18. Molluscan engrailed expression, serial organization, and shell evolution

    NASA Technical Reports Server (NTRS)

    Jacobs, D. K.; Wray, C. G.; Wedeen, C. J.; Kostriken, R.; DeSalle, R.; Staton, J. L.; Gates, R. D.; Lindberg, D. R.

    2000-01-01

    Whether the serial features found in some molluscs are ancestral or derived is considered controversial. Here, in situ hybridization and antibody studies show iterated engrailed-gene expression in transverse rows of ectodermal cells bounding plate field development and spicule formation in the chiton, Lepidochitona cavema, as well as in cells surrounding the valves and in the early development of the shell hinge in the clam, Transennella tantilla. Ectodermal expression of engrailed is associated with skeletogenesis across a range of bilaterian phyla, suggesting a single evolutionary origin of invertebrate skeletons. The shared ancestry of bilaterian-invertebrate skeletons may help explain the sudden appearance of shelly fossils in the Cambrian. Our interpretation departs from the consideration of canonical metameres or segments as units of evolutionary analysis. In this interpretation, the shared ancestry of engrailed-gene function in the terminal/posterior addition of serially repeated elements during development explains the iterative expression of engrailed genes in a range of metazoan body plans.

  19. Working memory capacity and controlled serial memory search.

    PubMed

    Mızrak, Eda; Öztekin, Ilke

    2016-08-01

    The speed-accuracy trade-off (SAT) procedure was used to investigate the relationship between working memory capacity (WMC) and the dynamics of temporal order memory retrieval. High- and low-span participants (HSs, LSs) studied sequentially presented five-item lists, followed by two probes from the study list. Participants indicated the more recent probe. Overall, accuracy was higher for HSs compared to LSs. Crucially, in contrast to previous investigations that observed no impact of WMC on speed of access to item information in memory (e.g., Öztekin & McElree, 2010), recovery of temporal order memory was slower for LSs. While accessing an item's representation in memory can be direct, recovery of relational information such as temporal order information requires a more controlled serial memory search. Collectively, these data indicate that WMC effects are particularly prominent during high demands of cognitive control, such as serial search operations necessary to access temporal order information from memory. PMID:27135712

  20. Fast word reading in pure alexia: "fast, yet serial".

    PubMed

    Bormann, Tobias; Wolfer, Sascha; Hachmann, Wibke; Neubauer, Claudia; Konieczny, Lars

    2015-01-01

    Pure alexia is a severe impairment of word reading in which individuals process letters serially with a pronounced length effect. Yet, there is considerable variation in the performance of alexic readers with generally very slow, but also occasionally fast responses, an observation addressed rarely in previous reports. It has been suggested that "fast" responses in pure alexia reflect residual parallel letter processing or that they may even be subserved by an independent reading system. Four experiments assessed fast and slow reading in a participant (DN) with pure alexia. Two behavioral experiments investigated frequency, neighborhood, and length effects in forced fast reading. Two further experiments measured eye movements when DN was forced to read quickly, or could respond faster because words were easier to process. Taken together, there was little support for the proposal that "qualitatively different" mechanisms or reading strategies underlie both types of responses in DN. Instead, fast responses are argued to be generated by the same serial-reading strategy.

  1. Longitudinal fibre splitting in muscular dystrophy: a serial cinematographic study

    PubMed Central

    Isaacs, Edward R.; Bradley, Walter G.; Henderson, Gerald

    1973-01-01

    A technique of block surface-staining and serial cinematography was modified to review serial sections of normal and dystrophic muscle from the Bar Harbor 129 Re strain of mice as a preliminary study of fibre splitting in dystrophic muscle. Using this technique, muscle fibres were reconstructed for up to 1·5 mm of their length without difficulty. Split fibres were identified only when the actual separation of fibres was observed. Splitting was seen to be a significant cause of the variations in fibre diameter and was at times responsible for the formation of groups of small atrophic fibres which resembled those seen in denervation atrophy. Complex multiple splitting and recombination of daughter and parent fibres was also observed and reconstructed to scale. These results may have considerable significance for the interpretation of physiological data on both human and murine dystrophic muscle. Images PMID:4753877

  2. Serial thyroid iodine content in hyperthyroid patients treated with radioiodine

    SciTech Connect

    Lee, G.S.; Sandler, M.P.; Patton, J.A.; Brill, A.B.

    1986-02-01

    X-ray fluorescent scanning was used to measure initial thyroidal iodine content in 64 patients diagnosed as being hyperthyroid and selected for I-131 therapy, and serially in 48 of these patients after therapy in an attempt to determine those patients that were at high risk of becoming hypothyroid. Iodine content fell rapidly after therapy, reaching a nadir at about three months. Based on the population studied, the chance of early hypothyroidism (within 12 months) is about 80% if the iodine content measured at three months is less than 2 mg. If the iodine content is greater than 2 mg, the chance is only about 14%. The serial measurement of thyroidal iodine content (with x-ray fluorescent scanning) may allow early identification of those patients at high risk of developing permanent hypothyroidism following a therapeutic dose of I-131.

  3. Low-Stroke Actuation for a Serial Robot

    NASA Technical Reports Server (NTRS)

    Gao, Dalong (Inventor); Ihrke, Chris A. (Inventor)

    2014-01-01

    A serial robot includes a base, first and second segments, a proximal joint joining the base to the first segment, and a distal joint. The distal joint that joins the segments is serially arranged and distal with respect to the proximal joint. The robot includes first and second actuators. A first tendon extends from the first actuator to the proximal joint and is selectively moveable via the first actuator. A second tendon extends from the second actuator to the distal joint and is selectively moveable via the second actuator. The robot includes a transmission having at least one gear element which assists rotation of the distal joint when an input force is applied to the proximal and/or distal joints by the first and/or second actuators. A robotic hand having the above robot is also disclosed, as is a robotic system having a torso, arm, and the above-described hand.

  4. Oil-free hyaluronic acid matrix for serial femtosecond crystallography

    PubMed Central

    Sugahara, Michihiro; Song, Changyong; Suzuki, Mamoru; Masuda, Tetsuya; Inoue, Shigeyuki; Nakane, Takanori; Yumoto, Fumiaki; Nango, Eriko; Tanaka, Rie; Tono, Kensuke; Joti, Yasumasa; Kameshima, Takashi; Hatsui, Takaki; Yabashi, Makina; Nureki, Osamu; Numata, Keiji; Iwata, So

    2016-01-01

    The grease matrix was originally introduced as a microcrystal-carrier for serial femtosecond crystallography and has been expanded to applications for various types of proteins, including membrane proteins. However, the grease-based matrix has limited application for oil-sensitive proteins. Here we introduce a grease-free, water-based hyaluronic acid matrix. Applications for proteinase K and lysozyme proteins were able to produce electron density maps at 2.3-Å resolution. PMID:27087008

  5. Which serial killers commit suicide? An exploratory study.

    PubMed

    Lester, David; White, John

    2012-11-30

    In a sample of 483 serial killers, 6.2% were documented to have committed suicide. Those who committed suicide were found to come from more dysfunctional homes characterized by more psychiatric disturbance in the parents. The sexual acts involved in the murders by the suicides seemed to be more deviant in some aspects, such as committing more bizarre sexual acts or more often taping the murder.

  6. Native sulfur/chlorine SAD phasing for serial femtosecond crystallography.

    PubMed

    Nakane, Takanori; Song, Changyong; Suzuki, Mamoru; Nango, Eriko; Kobayashi, Jun; Masuda, Tetsuya; Inoue, Shigeyuki; Mizohata, Eiichi; Nakatsu, Toru; Tanaka, Tomoyuki; Tanaka, Rie; Shimamura, Tatsuro; Tono, Kensuke; Joti, Yasumasa; Kameshima, Takashi; Hatsui, Takaki; Yabashi, Makina; Nureki, Osamu; Iwata, So; Sugahara, Michihiro

    2015-12-01

    Serial femtosecond crystallography (SFX) allows structures to be determined with minimal radiation damage. However, phasing native crystals in SFX is not very common. Here, the structure determination of native lysozyme from single-wavelength anomalous diffraction (SAD) by utilizing the anomalous signal of sulfur and chlorine at a wavelength of 1.77 Å is successfully demonstrated. This sulfur SAD method can be applied to a wide range of proteins, which will improve the determination of native crystal structures.

  7. Native sulfur/chlorine SAD phasing for serial femtosecond crystallography

    PubMed Central

    Nakane, Takanori; Song, Changyong; Suzuki, Mamoru; Nango, Eriko; Kobayashi, Jun; Masuda, Tetsuya; Inoue, Shigeyuki; Mizohata, Eiichi; Nakatsu, Toru; Tanaka, Tomoyuki; Tanaka, Rie; Shimamura, Tatsuro; Tono, Kensuke; Joti, Yasumasa; Kameshima, Takashi; Hatsui, Takaki; Yabashi, Makina; Nureki, Osamu; Iwata, So; Sugahara, Michihiro

    2015-01-01

    Serial femtosecond crystallography (SFX) allows structures to be determined with minimal radiation damage. However, phasing native crystals in SFX is not very common. Here, the structure determination of native lysozyme from single-wavelength anomalous diffraction (SAD) by utilizing the anomalous signal of sulfur and chlorine at a wavelength of 1.77 Å is successfully demonstrated. This sulfur SAD method can be applied to a wide range of proteins, which will improve the determination of native crystal structures. PMID:26627659

  8. A nonparametric trend test for seasonal data with serial dependence.

    USGS Publications Warehouse

    Hirsch, R.M.; Slack, J.R.

    1984-01-01

    Statistical tests for monotonic trend in seasonal (eg monthly) hydrologic time series are commonly confounded by some of the following problems: nonnormal data, missing values, seasonality, censoring and serial dependence. An extension of the Mann-Kendall test for trend (designed for such data) is presented here. Because the test is based entirely on tanks, it is robust against nonnormality and censoring.-from Authors

  9. Lipidic cubic phase injector facilitates membrane protein serial femtosecond crystallography.

    PubMed

    Weierstall, Uwe; James, Daniel; Wang, Chong; White, Thomas A; Wang, Dingjie; Liu, Wei; Spence, John C H; Bruce Doak, R; Nelson, Garrett; Fromme, Petra; Fromme, Raimund; Grotjohann, Ingo; Kupitz, Christopher; Zatsepin, Nadia A; Liu, Haiguang; Basu, Shibom; Wacker, Daniel; Han, Gye Won; Katritch, Vsevolod; Boutet, Sébastien; Messerschmidt, Marc; Williams, Garth J; Koglin, Jason E; Marvin Seibert, M; Klinker, Markus; Gati, Cornelius; Shoeman, Robert L; Barty, Anton; Chapman, Henry N; Kirian, Richard A; Beyerlein, Kenneth R; Stevens, Raymond C; Li, Dianfan; Shah, Syed T A; Howe, Nicole; Caffrey, Martin; Cherezov, Vadim

    2014-01-01

    Lipidic cubic phase (LCP) crystallization has proven successful for high-resolution structure determination of challenging membrane proteins. Here we present a technique for extruding gel-like LCP with embedded membrane protein microcrystals, providing a continuously renewed source of material for serial femtosecond crystallography. Data collected from sub-10-μm-sized crystals produced with less than 0.5 mg of purified protein yield structural insights regarding cyclopamine binding to the Smoothened receptor.

  10. Two Serial Data to Pulse Code Modulation System Interfaces

    NASA Technical Reports Server (NTRS)

    Hamory, Phil

    2006-01-01

    Two pulse code modulation (PCM) system interfaces for asynchronous serial data are described. One interface is for global positioning system (GPS) data on the NASA Dryden Flight Research Center (DFRC) F-15B (McDonnell Douglas Corporation, St. Louis, Missouri) airplane, tail number 836 (F-15B/836). The other is for flight control computer data on the duPont Aerospace (La Jolla, California) DP-1, a 53-percent scale model of the duPont Aerospace DP-2.

  11. Oil-free hyaluronic acid matrix for serial femtosecond crystallography

    NASA Astrophysics Data System (ADS)

    Sugahara, Michihiro; Song, Changyong; Suzuki, Mamoru; Masuda, Tetsuya; Inoue, Shigeyuki; Nakane, Takanori; Yumoto, Fumiaki; Nango, Eriko; Tanaka, Rie; Tono, Kensuke; Joti, Yasumasa; Kameshima, Takashi; Hatsui, Takaki; Yabashi, Makina; Nureki, Osamu; Numata, Keiji; Iwata, So

    2016-04-01

    The grease matrix was originally introduced as a microcrystal-carrier for serial femtosecond crystallography and has been expanded to applications for various types of proteins, including membrane proteins. However, the grease-based matrix has limited application for oil-sensitive proteins. Here we introduce a grease-free, water-based hyaluronic acid matrix. Applications for proteinase K and lysozyme proteins were able to produce electron density maps at 2.3-Å resolution.

  12. Which serial killers commit suicide? An exploratory study.

    PubMed

    Lester, David; White, John

    2012-11-30

    In a sample of 483 serial killers, 6.2% were documented to have committed suicide. Those who committed suicide were found to come from more dysfunctional homes characterized by more psychiatric disturbance in the parents. The sexual acts involved in the murders by the suicides seemed to be more deviant in some aspects, such as committing more bizarre sexual acts or more often taping the murder. PMID:23131308

  13. Lipidic cubic phase injector facilitates membrane protein serial femtosecond crystallography

    PubMed Central

    Weierstall, Uwe; James, Daniel; Wang, Chong; White, Thomas A.; Wang, Dingjie; Liu, Wei; Spence, John C.H.; Doak, R. Bruce; Nelson, Garrett; Fromme, Petra; Fromme, Raimund; Grotjohann, Ingo; Kupitz, Christopher; Zatsepin, Nadia A.; Liu, Haiguang; Basu, Shibom; Wacker, Daniel; Han, Gye Won; Katritch, Vsevolod; Boutet, Sébastien; Messerschmidt, Marc; Williams, Garth J.; Koglin, Jason E.; Seibert, M. Marvin; Klinker, Markus; Gati, Cornelius; Shoeman, Robert L.; Barty, Anton; Chapman, Henry N.; Kirian, Richard A.; Beyerlein, Kenneth R.; Stevens, Raymond C.; Li, Dianfan; Shah, Syed T.A.; Howe, Nicole; Caffrey, Martin; Cherezov, Vadim

    2014-01-01

    Lipidic cubic phase (LCP) crystallization has proven successful for high-resolution structure determination of challenging membrane proteins. Here we present a technique for extruding gel-like LCP with embedded membrane protein microcrystals, providing a continuously-renewed source of material for serial femtosecond crystallography. Data collected from sub-10 μm-sized crystals produced with less than 0.5 mg of purified protein yield structural insights regarding cyclopamine binding to the Smoothened receptor. PMID:24525480

  14. Lipidic cubic phase injector facilitates membrane protein serial femtosecond crystallography.

    PubMed

    Weierstall, Uwe; James, Daniel; Wang, Chong; White, Thomas A; Wang, Dingjie; Liu, Wei; Spence, John C H; Bruce Doak, R; Nelson, Garrett; Fromme, Petra; Fromme, Raimund; Grotjohann, Ingo; Kupitz, Christopher; Zatsepin, Nadia A; Liu, Haiguang; Basu, Shibom; Wacker, Daniel; Han, Gye Won; Katritch, Vsevolod; Boutet, Sébastien; Messerschmidt, Marc; Williams, Garth J; Koglin, Jason E; Marvin Seibert, M; Klinker, Markus; Gati, Cornelius; Shoeman, Robert L; Barty, Anton; Chapman, Henry N; Kirian, Richard A; Beyerlein, Kenneth R; Stevens, Raymond C; Li, Dianfan; Shah, Syed T A; Howe, Nicole; Caffrey, Martin; Cherezov, Vadim

    2014-01-01

    Lipidic cubic phase (LCP) crystallization has proven successful for high-resolution structure determination of challenging membrane proteins. Here we present a technique for extruding gel-like LCP with embedded membrane protein microcrystals, providing a continuously renewed source of material for serial femtosecond crystallography. Data collected from sub-10-μm-sized crystals produced with less than 0.5 mg of purified protein yield structural insights regarding cyclopamine binding to the Smoothened receptor. PMID:24525480

  15. Arthrogryposis wrist deformities: results of infantile serial casting.

    PubMed

    Smith, Dean W; Drennan, James C

    2002-01-01

    Arthrogryposis multiplex congenita involving the upper extremity can be associated with significant contractures of major joints. Treatment options to maximize upper extremity motion and function include passive joint stretching, serial casting, or surgical intervention. This study reviewed all patients at Carrie Tingley Hospital with arthrogrypotic wrist flexion contractures treated with passive stretching, serial casting, and custom wrist orthotics to determine the effect on wrist position and function. Seventeen infant patients with distal and classic arthrogryposis used this regimen. Average follow-up was 6 years. The greatest gain in wrist motion occurred after the first casting session for both groups. Patients with distal arthrogryposis had the largest improvement in passive wrist motion, were more functionally independent at final follow-up, and had no recurrence of deformity. Patients with classic arthrogryposis had rigid wrist flexion contractures and a 75% incidence of deformity recurrence after casting. At final follow-up, these patients remained functionally dependent, requiring >50% assistance with activities of daily living, and had less improvement in wrist motion. The authors recommend early casting of infant wrist deformities for both forms of arthrogryposis. If the wrist deformity recurs, repeat serial casting is unlikely to improve wrist extension. Other treatment options may be considered in the older child.

  16. Efficient multitasking: parallel versus serial processing of multiple tasks

    PubMed Central

    Fischer, Rico; Plessow, Franziska

    2015-01-01

    In the context of performance optimizations in multitasking, a central debate has unfolded in multitasking research around whether cognitive processes related to different tasks proceed only sequentially (one at a time), or can operate in parallel (simultaneously). This review features a discussion of theoretical considerations and empirical evidence regarding parallel versus serial task processing in multitasking. In addition, we highlight how methodological differences and theoretical conceptions determine the extent to which parallel processing in multitasking can be detected, to guide their employment in future research. Parallel and serial processing of multiple tasks are not mutually exclusive. Therefore, questions focusing exclusively on either task-processing mode are too simplified. We review empirical evidence and demonstrate that shifting between more parallel and more serial task processing critically depends on the conditions under which multiple tasks are performed. We conclude that efficient multitasking is reflected by the ability of individuals to adjust multitasking performance to environmental demands by flexibly shifting between different processing strategies of multiple task-component scheduling. PMID:26441742

  17. Efficient multitasking: parallel versus serial processing of multiple tasks.

    PubMed

    Fischer, Rico; Plessow, Franziska

    2015-01-01

    In the context of performance optimizations in multitasking, a central debate has unfolded in multitasking research around whether cognitive processes related to different tasks proceed only sequentially (one at a time), or can operate in parallel (simultaneously). This review features a discussion of theoretical considerations and empirical evidence regarding parallel versus serial task processing in multitasking. In addition, we highlight how methodological differences and theoretical conceptions determine the extent to which parallel processing in multitasking can be detected, to guide their employment in future research. Parallel and serial processing of multiple tasks are not mutually exclusive. Therefore, questions focusing exclusively on either task-processing mode are too simplified. We review empirical evidence and demonstrate that shifting between more parallel and more serial task processing critically depends on the conditions under which multiple tasks are performed. We conclude that efficient multitasking is reflected by the ability of individuals to adjust multitasking performance to environmental demands by flexibly shifting between different processing strategies of multiple task-component scheduling. PMID:26441742

  18. Serial extraction: 20 years of follow-up.

    PubMed

    Almeida, Renato Rodrigues de; Almeida, Marcio Rodrigues de; Oltramari-Navarro, Paula Vanessa Pedron; Conti, Ana Cláudia de Castro Ferreira; Navarro, Ricardo de Lima; Souza, Karen Regina Siqueira de

    2012-01-01

    This paper reports a case treated by a serial extraction program at the mixed dentition stage followed by a corrective orthodontic treatment, with a long-term follow-up period. Twenty years after the interceptive treatment, a harmonious face was observed along with treatment stability in the anterior posterior direction, deep overbite (which has been mentioned as a disadvantage of the serial extraction program), and a small relapse of anterior tooth crowding. All these conditions have been regarded as normal occurrences for most orthodontic treatments with a long-term follow-up period. This case report demonstrated that the establishment of a serial extraction protocol determined relevant esthetic changes that afforded an improvement of the patient's self-esteem, with a positive social impact. Furthermore, the low cost of this protocol permits the use of this therapy with underprivileged populations. It is important to emphasize that an early correction of tooth crowding by this protocol does not guarantee stability, but small relapses do not invalidate its accomplishment.

  19. Serial extraction: 20 years of follow-up

    PubMed Central

    de ALMEIDA, Renato Rodrigues; de ALMEIDA, Marcio Rodrigues; OLTRAMARI-NAVARRO, Paula Vanessa Pedron; CONTI, Ana Cláudia de Castro Ferreira; NAVARRO, Ricardo de Lima; de SOUZA, Karen Regina Siqueira

    2012-01-01

    This paper reports a case treated by a serial extraction program at the mixed dentition stage followed by a corrective orthodontic treatment, with a long-term follow-up period. Twenty years after the interceptive treatment, a harmonious face was observed along with treatment stability in the anterior posterior direction, deep overbite (which has been mentioned as a disadvantage of the serial extraction program), and a small relapse of anterior tooth crowding. All these conditions have been regarded as normal occurrences for most orthodontic treatments with a long-term follow-up period. This case report demonstrated that the establishment of a serial extraction protocol determined relevant esthetic changes that afforded an improvement of the patient's self-esteem, with a positive social impact. Furthermore, the low cost of this protocol permits the use of this therapy with underprivileged populations. It is important to emphasize that an early correction of tooth crowding by this protocol does not guarantee stability, but small relapses do not invalidate its accomplishment. PMID:23032213

  20. DDCMP protocol on a DMA serial-line board

    SciTech Connect

    Hunt, D.N.; Kessler, G.C.

    1982-01-01

    The Nuclear Chemistry Division of Lawrence Livermore National Laboratory is in the midst of an upgrade to their radiation counting facility. The result of this upgrade wil be a computer-based data acquisition network, the Nuclear Chemistry Counting Facility Network (NCCF-NET). This network will consist of forty dedicated LSI-11/2 based controllers, ten interactive LSI-11/23 based workstations and a VAX-11/750 central node for data reduction and storage. One of the data acquisition instruments used in this network is a Nuclear Data pulse-height analyzer, the ND66L. This analyzer communicates to a host system over a 9600-baud serial line, using the DDCMP link level protocol. In order to relieve the host computer from the overhead of handling the DDCMP protocol, an in-house designed DMA serial line board was implemented to communicate with the ND66L. The hardware used and its environment will be duscussed along with the design and implementation of the firmware, which implements the serial DDCMP link.

  1. Efficient multitasking: parallel versus serial processing of multiple tasks.

    PubMed

    Fischer, Rico; Plessow, Franziska

    2015-01-01

    In the context of performance optimizations in multitasking, a central debate has unfolded in multitasking research around whether cognitive processes related to different tasks proceed only sequentially (one at a time), or can operate in parallel (simultaneously). This review features a discussion of theoretical considerations and empirical evidence regarding parallel versus serial task processing in multitasking. In addition, we highlight how methodological differences and theoretical conceptions determine the extent to which parallel processing in multitasking can be detected, to guide their employment in future research. Parallel and serial processing of multiple tasks are not mutually exclusive. Therefore, questions focusing exclusively on either task-processing mode are too simplified. We review empirical evidence and demonstrate that shifting between more parallel and more serial task processing critically depends on the conditions under which multiple tasks are performed. We conclude that efficient multitasking is reflected by the ability of individuals to adjust multitasking performance to environmental demands by flexibly shifting between different processing strategies of multiple task-component scheduling.

  2. Voltage balancing strategies for serial connection of microbial fuel cells

    NASA Astrophysics Data System (ADS)

    Khaled, Firas; Ondel, Olivier; Allard, Bruno; Buret, François

    2015-07-01

    The microbial fuel cell (MFC) converts electrochemically organic matter into electricity by means of metabolisms of bacteria. The MFC power output is limited by low voltage and low current characteristics in the range of microwatts or milliwatts per litre. In order to produce a sufficient voltage level (>1.5 V) and sufficient power to supply real applications such as autonomous sensors, it is necessary to either scale-up one single unit or to connect multiple units together. Many topologies of connection are possible as the serial association to improve the output voltage, or the parallel connection to improve the output current or the series/parallel connection to step-up both voltage and current. The association of MFCs in series is a solution to increase the voltage to an acceptable value and to mutualize the unit's output power. The serial association of a large number of MFCs presents several issues. The first one is the hydraulic coupling among MFCs when they share the same substrate. The second one is the dispersion between generators that lead to a non-optimal stack efficiency because the maximum power point (MPP) operation of all MFCs is not permitted. Voltage balancing is a solution to compensate non-uniformities towards MPP. This paper presents solutions to improve the efficiency of a stack of serially connected MFCs through a voltage-balancing circuit. Contribution to the topical issue "Electrical Engineering Symposium (SGE 2014)", edited by Adel Razek

  3. Dilute oxygen combustion. Phase I report

    SciTech Connect

    1997-10-01

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NO{sub x}) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NO{sub x} through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NO{sub x} production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature ({approximately}1366 K) oxidant (7-27% O{sub 2} vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d{sup +} scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d{sup +} scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW ({approximately}0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric

  4. Dilute Oxygen Combustion Phase 2 Final Report

    SciTech Connect

    Ryan, H.M.; Riley, M.F.; Kobayashi, H.

    2005-09-30

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NOx) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NOx through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NOx production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature (~1366 K) oxidant (7-27% O2 vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d+ scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d+ scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW (~0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric arrangement, firing rate, and fuel injection velocity. NOx emissions

  5. Dilute Oxygen Combustion Phase I Final Report

    SciTech Connect

    Ryan, H.M.; Riley, M.F.; Kobayashi, H.

    1997-10-31

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NOx) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NOx through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NOx production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature (~1366 K) oxidant (7-27% O2 vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d+ scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d+ scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW (~0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric arrangement, firing rate, and fuel injection velocity. NOx emissions

  6. Diluted magnetic semiconductor superlattices and heterostructures

    NASA Astrophysics Data System (ADS)

    Datta, S.; Furdyna, J. K.; Gunshor, R. L.

    Diluted magnetic semiconductors (DMS) are mixed semiconducting crystals whose lattice is made up in part of substitutional magnetic ions. Cd 1-xMn xTe and Hg 1-xMn xTe are examples of such materials. Their structural and band parameters can be "tuned" by composition over a wide range. They can thus be exploited in situations completely similar to those involving Ga 1-xAl xAs. Using molecular beam epitaxy, we have grown Cd 1-xMn xTe superlattices with alternating Mn content, having up to 150 layers, with layer thickness ranging from 50 to 100 Å. The superlattice structure is clearly revealed by transmission electron microscopy and by zone-folding of the phonon spectrum observed in Raman scattering. Photoluminescence observed on Cd 1-xMn xTe superlattices is several orders of magnitude greater than that from a Cd 1-xMn xTe film with uniform Mn content, or from bulk Cd 1-xMn xTe specimens. The presence of localized magnetic moments in DMS results in a strong exchange interaction between these moments and band electrons. This in turn leads to gigantic Zeeman splittings of impurity states, exciton levels, Landau levels, and the bands themselves. Zeeman splittings as large as 20 meV (which in non-magnetic semiconductors would require unrealistic megagauss fields) are easily achieved in DMS in fields of several kilogauss. Since the magnitude of this exchange-induced splitting in DMS can be comparable to the binding energies and to the minigaps encountered in multiple quantum wells, DMS superlattices hold promise of a host of novel effects of both fundamental and applied interest.

  7. Highly Reliable, High-Speed, Unidirectional Serial Data Links

    NASA Technical Reports Server (NTRS)

    Cole, Robert M.; Bishop, Jamie

    2005-01-01

    Highly reliable, high-speed, unidirectional serial data-communication subsystems have been proposed to be installed in an upgrade of the computing systems aboard the space shuttles. The basic design concept of these serial data links is also adaptable to terrestrial use in applications in which there are requirements for highly reliable serial data communications. The hardware and software aspects of the architecture of the data links are dictated largely by a requirement, in the original space-shuttle application, for one computer to monitor the memory transactions and memory contents of other computers in real time with high reliability and without reliance on requests for retransmission. To minimize weight while affording a capability to transfer data at a required rate of 2.56 x 10(exp 8) bits per second, it was decided that the links would be serial ones of the fiber-channel type. [Fiber channel denotes a type of serial computer bus that is used to connect a computer (usually a supercomputer) with a high-speed data storage device. Depending on the specific application, the physical connection between the transmitter and receiver could be made via an optical fiber or a twisted pair of wires.] Heretofore, fiber-channel links have ordinarily been bidirectional and have operated under protocols that provide for receiving stations to detect errors and request retransmission when necessary. In the present case, the time taken by processing to request retransmission would conflict with the requirement for real-time transfer of data. To ensure reliability without retransmission, a link according to the proposal would utilize a modified version of the normal fiberchannel character set in conjunction with forward error correction by means of a Reed-Solomon code (see figure). The Reed-Solomon encoding and decoding and the translations between the normal and modified character sets would be effected by logic circuitry external to the fiber-channel transmitter and receiver

  8. Serial position memory in the visual-spatial domain: reconstructing sequences of unfamiliar faces.

    PubMed

    Smyth, Mary M; Hay, Dennis C; Hitch, Graham J; Horton, Neil J

    2005-07-01

    In two studies we presented pictures of unfamiliar faces one at a time, then presented the complete set at test and asked for serial reconstruction of the order of presentation. Serial position functions were similar to those found with verbal materials, with considerable primacy and one item recency, position errors that were mainly to the adjacent serial position, a visual similarity effect, and effects of articulatory suppression that did not interact with the serial position effect or with the similarity effect. Serial position effects were found when faces had been seen for as little as 300 ms and after a 6-s retention interval filled with articulatory suppression. Serial position effects found with unfamiliar faces are not based on verbal encoding strategies, and important elements of serial memory may be general across modalities.

  9. Biodiversity inhibits parasites: Broad evidence for the dilution effect.

    PubMed

    Civitello, David J; Cohen, Jeremy; Fatima, Hiba; Halstead, Neal T; Liriano, Josue; McMahon, Taegan A; Ortega, C Nicole; Sauer, Erin Louise; Sehgal, Tanya; Young, Suzanne; Rohr, Jason R

    2015-07-14

    Infectious diseases of humans, wildlife, and domesticated species are increasing worldwide, driving the need to understand the mechanisms that shape outbreaks. Simultaneously, human activities are drastically reducing biodiversity. These concurrent patterns have prompted repeated suggestions that biodiversity and disease are linked. For example, the dilution effect hypothesis posits that these patterns are causally related; diverse host communities inhibit the spread of parasites via several mechanisms, such as by regulating populations of susceptible hosts or interfering with parasite transmission. However, the generality of the dilution effect hypothesis remains controversial, especially for zoonotic diseases of humans. Here we provide broad evidence that host diversity inhibits parasite abundance using a meta-analysis of 202 effect sizes on 61 parasite species. The magnitude of these effects was independent of host density, study design, and type and specialization of parasites, indicating that dilution was robust across all ecological contexts examined. However, the magnitude of dilution was more closely related to the frequency, rather than density, of focal host species. Importantly, observational studies overwhelmingly documented dilution effects, and there was also significant evidence for dilution effects of zoonotic parasites of humans. Thus, dilution effects occur commonly in nature, and they may modulate human disease risk. A second analysis identified similar effects of diversity in plant-herbivore systems. Thus, although there can be exceptions, our results indicate that biodiversity generally decreases parasitism and herbivory. Consequently, anthropogenic declines in biodiversity could increase human and wildlife diseases and decrease crop and forest production.

  10. Dynamics of atmospheres with a non-dilute condensible component

    NASA Astrophysics Data System (ADS)

    Pierrehumbert, Raymond T.; Ding, Feng

    2016-06-01

    The diversity of characteristics for the host of recently discovered exoplanets opens up a great deal of fertile new territory for geophysical fluid dynamics, particularly when the fluid flow is coupled to novel thermodynamics, radiative transfer or chemistry. In this paper, we survey one of these new areas-the climate dynamics of atmospheres with a non-dilute condensible component, defined as the situation in which a condensible component of the atmosphere makes up a substantial fraction of the atmospheric mass within some layer. Non-dilute dynamics can occur for a wide range of condensibles, generically applying near both the inner and the outer edges of the conventional habitable zone and in connection with runaway greenhouse phenomena. It also applies in a wide variety of other planetary circumstances. We first present a number of analytical results developing some key features of non-dilute atmospheres, and then show how some of these features are manifest in simulations with a general circulation model adapted to handle non-dilute atmospheres. We find that non-dilute atmospheres have weak horizontal temperature gradients even for rapidly rotating planets, and that their circulations are largely barotropic. The relative humidity of the condensible component tends towards 100% as the atmosphere becomes more non-dilute, which has important implications for runaway greenhouse thresholds. Non-dilute atmospheres exhibit a number of interesting organized convection features, for which there is not yet any adequate theoretical understanding.

  11. Dilute Oxygen Combustion Phase IV Final Report

    SciTech Connect

    Riley, M.F.

    2003-04-30

    Novel furnace designs based on Dilute Oxygen Combustion (DOC) technology were developed under subcontract by Techint Technologies, Coraopolis, PA, to fully exploit the energy and environmental capabilities of DOC technology and to provide a competitive offering for new furnace construction opportunities. Capital cost, fuel, oxygen and utility costs, NOx emissions, oxide scaling performance, and maintenance requirements were compared for five DOC-based designs and three conventional air5-fired designs using a 10-year net present value calculation. A furnace direct completely with DOC burners offers low capital cost, low fuel rate, and minimal NOx emissions. However, these benefits do not offset the cost of oxygen and a full DOC-fired furnace is projected to cost $1.30 per ton more to operate than a conventional air-fired furnace. The incremental cost of the improved NOx performance is roughly $6/lb NOx, compared with an estimated $3/lb. NOx for equ8pping a conventional furnace with selective catalytic reduction (SCCR) technology. A furnace fired with DOC burners in the heating zone and ambient temperature (cold) air-fired burners in the soak zone offers low capital cost with less oxygen consumption. However, the improvement in fuel rate is not as great as the full DOC-fired design, and the DOC-cold soak design is also projected to cost $1.30 per ton more to operate than a conventional air-fired furnace. The NOx improvement with the DOC-cold soak design is also not as great as the full DOC fired design, and the incremental cost of the improved NOx performance is nearly $9/lb NOx. These results indicate that a DOC-based furnace design will not be generally competitive with conventional technology for new furnace construction under current market conditions. Fuel prices of $7/MMBtu or oxygen prices of $23/ton are needed to make the DOC furnace economics favorable. Niche applications may exist, particularly where access to capital is limited or floor space limitations

  12. Effect of dilution on carboxymethylcellulase and xylanase assays

    SciTech Connect

    Cauchon, N.; LeDuy, A.

    1984-08-01

    It has been demonstrated that the dilution of samples prior to the carboxymethylcellulase and xylanase assays causes serious discrepancies in the numerical values obtained for the enzyme activities. Even when the sample is assayed with the identical procedure, one could obtain different numerical values of the enzyme activity U depending on how much this sample has been diluted before the enzyme assay. Two crude commercial cellulase samples of Aspergillus niger and Trichoderma viride as well as the culture filtrate of our newly isolated acidophilic fungus have been used for the demonstration. An empirical method for reporting the cellulolytic activity by taking into account this dilution effect is proposed.

  13. Two-stage dilute acid prehydrolysis of biomass

    DOEpatents

    Grohmann, Karel; Torget, Robert W.

    1992-01-01

    A two-stage dilute acid prehydrolysis process on xylan containing hemicellulose in biomass is effected by: treating feedstock of hemicellulosic material comprising xylan that is slow hydrolyzable and xylan that is fast hydrolyzable under predetermined low temperature conditions with a dilute acid for a residence time sufficient to hydrolyze the fast hydrolyzable xylan to xylose; removing said xylose from said fast hydrolyzable xylan and leaving a residue; and treating said residue having a slow hydrolyzable xylan with a dilute acid under predetermined high temperature conditions for a residence time required to hydrolyze said slow hydrolyzable xylan to xylose.

  14. Specialized postsynaptic morphology enhances neurotransmitter dilution and high-frequency signaling at an auditory synapse.

    PubMed

    Graydon, Cole W; Cho, Soyoun; Diamond, Jeffrey S; Kachar, Bechara; von Gersdorff, Henrique; Grimes, William N

    2014-06-11

    Sensory processing in the auditory system requires that synapses, neurons, and circuits encode information with particularly high temporal and spectral precision. In the amphibian papillia, sound frequencies up to 1 kHz are encoded along a tonotopic array of hair cells and transmitted to afferent fibers via fast, repetitive synaptic transmission, thereby promoting phase locking between the presynaptic and postsynaptic cells. Here, we have combined serial section electron microscopy, paired electrophysiological recordings, and Monte Carlo diffusion simulations to examine novel mechanisms that facilitate fast synaptic transmission in the inner ear of frogs (Rana catesbeiana and Rana pipiens). Three-dimensional anatomical reconstructions reveal specialized spine-like contacts between individual afferent fibers and hair cells that are surrounded by large, open regions of extracellular space. Morphologically realistic diffusion simulations suggest that these local enlargements in extracellular space speed transmitter clearance and reduce spillover between neighboring synapses, thereby minimizing postsynaptic receptor desensitization and improving sensitivity during prolonged signal transmission. Additionally, evoked EPSCs in afferent fibers are unaffected by glutamate transporter blockade, suggesting that transmitter diffusion and dilution, and not uptake, play a primary role in speeding neurotransmission and ensuring fidelity at these synapses.

  15. Comparison of fluorescence optical respirometry and microbroth dilution methods for testing antimicrobial compounds.

    PubMed

    Hałasa, R; Turecka, K; Orlewska, C; Werel, W

    2014-12-01

    An analysis of the usefulness of the fluorescence optical respirometry test method to study several antimicrobials was performed. An oxygen-sensitive sensor: ruthenium-tris(4,7-diphenyl-1,10-phenanthroline) dichloride (Ru(DPP)3Cl2), the phosphorescence of which is quenched by molecular oxygen, was synthesised according to a method modified by us and then applied. A prototype sensitive measurement system was designed and constructed. Analyses of the impact of various antimicrobial chemical factors were performed: ampicillin, co-trimoxazole, nystatin, and newly synthesised compounds. It was shown that optical respirometry allows for analysis of the culture growth kinetics of bacteria and fungi and determination of cell growth parameters. It was shown also that MIC values obtained by fluorescence optical respirometry are consistent with the results of the MIC determinations made by serial dilution method (traditional MIC testing using CLSI). The method allows the time to obtain results to be significantly reduced (from 24-48 h to 5-7 h for bacteria and 24 yeasts) and allows the effect of concentrations below the MIC for the metabolic activity of microorganisms to be monitored. The sensitivity of the method allowed the volume of the tested samples to be lessened from 160 μl to 50 μl. Fluorescence optical respirometry allows for the rapid detection and evaluation of the action of various chemical compounds on the metabolic activity of microorganisms in real-time measurement of fluorescence intensity.

  16. Retroviral sequences located within an intron of the dilute gene alter dilute expression in a tissue-specific manner.

    PubMed Central

    Seperack, P K; Mercer, J A; Strobel, M C; Copeland, N G; Jenkins, N A

    1995-01-01

    The murine dilute coat color locus encodes an unconventional myosin heavy chain that is thought to be required for the elaboration or maintenance of dendrites or organelle transport in melanocytes and neurons. In previous studies we showed that the d mutation carried by many inbred strains of mice (now referred to as dilute viral, dv), is caused by the integration of an ecotropic murine leukemia virus (Emv-3) into the dilute gene and that phenotypic revertants of dv (termed d+) result from viral excision; a solo viral long terminal repeat (LTR) is all that remains in revertant DNA. In the studies described here we show that Emv-3 sequences are located within an intron of the dilute gene in a region of the C-terminal tail that is differentially spliced. We also show that these Emv-3 sequences result in the production of shortened and abnormally spliced dilute transcripts and that the level of this effect varies among tissues. This tissue-specific effect on dilute expression likely accounts for the absence of neurological abnormalities observed in dv mice. Surprisingly, we also found that the solo viral LTR present in revertant d+ DNA produces a tissue-specific effect on dilute expression, although this effect is less dramatic than with the full-length provirus and produces no obvious mutant phenotype. These findings have important implications for understanding the effects of viral sequences on mammalian gene expression. Images PMID:7774591

  17. Separation processes using expulsion from dilute supercritical solutions

    DOEpatents

    Cochran, Jr., Henry D.

    1993-01-01

    A process for separating isotopes as well as other mixtures by utilizing the behavior of dilute repulsive or weakly attractive elements of the mixtures as the critical point of the solvent is approached.

  18. Success, failure and ambiguity of the dilution effect among competitors.

    PubMed

    Strauss, Alexander T; Civitello, David J; Cáceres, Carla E; Hall, Spencer R

    2015-09-01

    It remains challenging to predict variation in the magnitude of disease outbreaks. The dilution effect seeks to explain this variation by linking multiple host species to disease transmission. It predicts that disease risk increases for a focal host when host species diversity declines. However, when an increase in species diversity does not reduce disease, we are often unable to diagnose why. Here, we increase mechanistic and predictive clarity of the dilution effect with a general trait-based model of disease transmission in multi-host communities. Then, we parameterise and empirically test our model with a multi-generational case study of planktonic disease. The model-experiment combination shows that hosts that vary in competitive ability (R*) and potential to spread disease (R0 ) can produce three qualitatively disparate outcomes of dilution on disease: the dilution effect can succeed, fail, or be ambiguous/irrelevant.

  19. Separation processes using expulsion from dilute supercritical solutions

    DOEpatents

    Cochran, H.D. Jr.

    1993-04-20

    A process is described for separating isotopes as well as other mixtures by utilizing the behavior of dilute repulsive or weakly attractive elements of the mixtures as the critical point of the solvent is approached.

  20. Anatomy of the symmetry energy of dilute nuclear matter

    SciTech Connect

    De, J. N.; Samaddar, S. K.; Agrawal, B. K.

    2010-10-15

    The symmetry energy coefficients of dilute clusters nuclear matter are evaluated in the S-matrix framework. Employing a few different definitions commonly used in the literature for uniform nuclear matter, it is seen that the different definitions lead to perceptibly different results for the symmetry coefficients for dilute nuclear matter. They are found to be higher compared to those obtained for uniform matter in the low density domain. The calculated results are in reasonable consonance with those extracted recently from experimental data.

  1. Can serial scintigraphic studies detect delayed fracture union in man

    SciTech Connect

    O'Reilly, R.J.; Cook, D.J.; Gaffney, R.D.; Angel, K.R.; Paterson, D.C.

    1981-01-01

    The uptake of the bone-seeking tracer technetium-99m-methylenediphosphonate increases following bone fracture as bone healing occurs. To investigate the pattern of change in normal healing and compare it with delayed union and nonunion, an analysis of automated computer profiles was carried out on serial scan data for 22 patients. The type of fracture (simple, comminuted, etc.) influenced the appearance of the activity profile; however, no significant differences in the patterns of change were noted between normal healing and delayed or non-union.

  2. Hi-speed versatile serial crate controller for CAMAC

    SciTech Connect

    Horelick, D.

    1984-10-01

    A serial crate controller, primarily for use in the SLC CAMAC control system, has been designed, and has been in use for about 2 years. The design supports a party line approach, with up to 16 crates on a single twisted pair for data transfers, plus another pair for prompt L response. The bit rate is 5 megabits/s, and complete transaction times of about 10 ..mu..s are achieved for 16-bit data transfers over cables up to 1000 feet long. One of the primary objects of the design was simplicity - there are approximately 60 chips in the two-board unit.

  3. Controllable optomechanical coupling in serially-coupled triple resonators

    SciTech Connect

    Huang, Chenguang Zhao, Yunsong; Fan, Jiahua; Zhu, Lin

    2014-12-15

    Radiation pressure can efficiently couple mechanical modes with optical modes in an optical cavity. The coupling efficiency is quite dependent on the interaction between the optical mode and mechanical mode. In this report, we investigate a serially-coupled triple resonator system, where a freestanding beam is placed in the vicinity of the middle resonator. In this coupled system, we demonstrate that the mechanical mode of the free-standing beam can be selectively coupled to different resonance supermodes through the near field interaction.

  4. Serial femtosecond X-ray diffraction of enveloped virus microcrystals

    DOE PAGES

    Lawrence, Robert M.; Conrad, Chelsie E.; Zatsepin, Nadia A.; Grant, Thomas D.; Liu, Haiguang; James, Daniel; Nelson, Garrett; Subramanian, Ganesh; Aquila, Andrew; Hunter, Mark S.; et al

    2015-08-20

    Serial femtosecond crystallography (SFX) using X-ray free-electron lasers has produced high-resolution, room temperature, time-resolved protein structures. We report preliminary SFX of Sindbis virus, an enveloped icosahedral RNA virus with ~700 Å diameter. Microcrystals delivered in viscous agarose medium diffracted to ~40 Å resolution. Small-angle diffuse X-ray scattering overlaid Bragg peaks and analysis suggests this results from molecular transforms of individual particles. Viral proteins undergo structural changes during entry and infection, which could, in principle, be studied with SFX. This is a pertinent step toward determining room temperature structures from virus microcrystals that may enable time-resolved studies of enveloped viruses.

  5. Protein crystal screening and characterization for serial femtosecond nanocrystallography

    PubMed Central

    Darmanin, Connie; Strachan, Jamie; Adda, Christopher G.; Ve, Thomas; Kobe, Bostjan; Abbey, Brian

    2016-01-01

    The recent development of X-ray free electron lasers (XFELs) has spurred the development of serial femtosecond nanocrystallography (SFX) which, for the first time, is enabling structure retrieval from sub-micron protein crystals. Although there are already a growing number of structures published using SFX, the technology is still very new and presents a number of unique challenges as well as opportunities for structural biologists. One of the biggest barriers to the success of SFX experiments is the preparation and selection of suitable protein crystal samples. Here we outline a protocol for preparing and screening for suitable XFEL targets. PMID:27139248

  6. Occupational therapy articles in serial publications: an analysis of sources.

    PubMed Central

    Reed, K L

    1988-01-01

    This study was designed to locate and document serial literature on occupational therapy published since 1900. Emphasis is placed on finding articles on occupational therapy or by occupational therapists from sources other than those normally associated with the professional journals. Multiple sources were used including print indexes, online databases, occupational therapy bibliographies, and tables of contents or yearly indexes. Almost 7,000 articles were identified, not including those published in foreign journals. Occupational therapy publications have increased steadily since 1900, with the most rapid increase during the 1970s and 1980s when five new occupational therapy journals were initiated. Suggestions for formulating search strategies are included. PMID:3285932

  7. High-Resolution Protein Structure Determination by Serial Femtosecond Crystallography

    PubMed Central

    Boutet, Sébastien; Lomb, Lukas; Williams, Garth J.; Barends, Thomas R. M.; Aquila, Andrew; Doak, R. Bruce; Weierstall, Uwe; DePonte, Daniel P.; Steinbrener, Jan; Shoeman, Robert L.; Messerschmidt, Marc; Barty, Anton; White, Thomas A.; Kassemeyer, Stephan; Kirian, Richard A.; Seibert, M. Marvin; Montanez, Paul A.; Kenney, Chris; Herbst, Ryan; Hart, Philip; Pines, Jack; Haller, Gunther; Gruner, Sol M.; Philipp, Hugh T.; Tate, Mark W.; Hromalik, Marianne; Koerner, Lucas J.; van Bakel, Niels; Morse, John; Ghonsalves, Wilfred; Arnlund, David; Bogan, Michael J.; Caleman, Carl; Fromme, Raimund; Hampton, Christina Y.; Hunter, Mark S.; Johansson, Linda C.; Katona, Gergely; Kupitz, Christopher; Liang, Mengning; Martin, Andrew V.; Nass, Karol; Redecke, Lars; Stellato, Francesco; Timneanu, Nicusor; Wang, Dingjie; Zatsepin, Nadia A.; Schafer, Donald; Defever, James; Neutze, Richard; Fromme, Petra; Spence, John C. H.; Chapman, Henry N.; Schlichting, Ilme

    2013-01-01

    Structure determination of proteins and other macromolecules has historically required the growth of high-quality crystals sufficiently large to diffract x-rays efficiently while withstanding radiation damage. We applied serial femtosecond crystallography (SFX) using an x-ray free-electron laser (XFEL) to obtain high-resolution structural information from microcrystals (less than 1 micrometer by 1 micrometer by 3 micrometers) of the well-characterized model protein lysozyme. The agreement with synchrotron data demonstrates the immediate relevance of SFX for analyzing the structure of the large group of difficult-to-crystallize molecules. PMID:22653729

  8. High-resolution protein structure determination by serial femtosecond crystallography.

    PubMed

    Boutet, Sébastien; Lomb, Lukas; Williams, Garth J; Barends, Thomas R M; Aquila, Andrew; Doak, R Bruce; Weierstall, Uwe; DePonte, Daniel P; Steinbrener, Jan; Shoeman, Robert L; Messerschmidt, Marc; Barty, Anton; White, Thomas A; Kassemeyer, Stephan; Kirian, Richard A; Seibert, M Marvin; Montanez, Paul A; Kenney, Chris; Herbst, Ryan; Hart, Philip; Pines, Jack; Haller, Gunther; Gruner, Sol M; Philipp, Hugh T; Tate, Mark W; Hromalik, Marianne; Koerner, Lucas J; van Bakel, Niels; Morse, John; Ghonsalves, Wilfred; Arnlund, David; Bogan, Michael J; Caleman, Carl; Fromme, Raimund; Hampton, Christina Y; Hunter, Mark S; Johansson, Linda C; Katona, Gergely; Kupitz, Christopher; Liang, Mengning; Martin, Andrew V; Nass, Karol; Redecke, Lars; Stellato, Francesco; Timneanu, Nicusor; Wang, Dingjie; Zatsepin, Nadia A; Schafer, Donald; Defever, James; Neutze, Richard; Fromme, Petra; Spence, John C H; Chapman, Henry N; Schlichting, Ilme

    2012-07-20

    Structure determination of proteins and other macromolecules has historically required the growth of high-quality crystals sufficiently large to diffract x-rays efficiently while withstanding radiation damage. We applied serial femtosecond crystallography (SFX) using an x-ray free-electron laser (XFEL) to obtain high-resolution structural information from microcrystals (less than 1 micrometer by 1 micrometer by 3 micrometers) of the well-characterized model protein lysozyme. The agreement with synchrotron data demonstrates the immediate relevance of SFX for analyzing the structure of the large group of difficult-to-crystallize molecules.

  9. High-resolution protein structure determination by serial femtosecond crystallography.

    PubMed

    Boutet, Sébastien; Lomb, Lukas; Williams, Garth J; Barends, Thomas R M; Aquila, Andrew; Doak, R Bruce; Weierstall, Uwe; DePonte, Daniel P; Steinbrener, Jan; Shoeman, Robert L; Messerschmidt, Marc; Barty, Anton; White, Thomas A; Kassemeyer, Stephan; Kirian, Richard A; Seibert, M Marvin; Montanez, Paul A; Kenney, Chris; Herbst, Ryan; Hart, Philip; Pines, Jack; Haller, Gunther; Gruner, Sol M; Philipp, Hugh T; Tate, Mark W; Hromalik, Marianne; Koerner, Lucas J; van Bakel, Niels; Morse, John; Ghonsalves, Wilfred; Arnlund, David; Bogan, Michael J; Caleman, Carl; Fromme, Raimund; Hampton, Christina Y; Hunter, Mark S; Johansson, Linda C; Katona, Gergely; Kupitz, Christopher; Liang, Mengning; Martin, Andrew V; Nass, Karol; Redecke, Lars; Stellato, Francesco; Timneanu, Nicusor; Wang, Dingjie; Zatsepin, Nadia A; Schafer, Donald; Defever, James; Neutze, Richard; Fromme, Petra; Spence, John C H; Chapman, Henry N; Schlichting, Ilme

    2012-07-20

    Structure determination of proteins and other macromolecules has historically required the growth of high-quality crystals sufficiently large to diffract x-rays efficiently while withstanding radiation damage. We applied serial femtosecond crystallography (SFX) using an x-ray free-electron laser (XFEL) to obtain high-resolution structural information from microcrystals (less than 1 micrometer by 1 micrometer by 3 micrometers) of the well-characterized model protein lysozyme. The agreement with synchrotron data demonstrates the immediate relevance of SFX for analyzing the structure of the large group of difficult-to-crystallize molecules. PMID:22653729

  10. A semiautomated approach for artefact removal in serial tissue cryosections.

    PubMed

    Kindle, L M; Kakadiaris, I A; Ju, T; Carson, J P

    2011-02-01

    Thinly sliced serial tissue sections of an organ can be imaged using optical microscopy at a resolution detailing individual cells. When the tissue sections are first subjected to in situ hybridization or immunohistochemistry, these data sets can be analysed for changes in gene expression and gene products. Such spatial information is important for understanding the functional effects of experimental or environmental challenges to the organism. However, a critical step in analysing these data sets is mitigating artefacts that result from the preparation of the tissue sections. In this paper, we describe an automated method with manual validation tools that together enable detecting and addressing artefacts including dust particles and air bubbles. PMID:21118219

  11. Active accumulation of very diluted biomolecules by nano-dispensing for easy detection below the femtomolar range

    NASA Astrophysics Data System (ADS)

    Grilli, S.; Miccio, L.; Gennari, O.; Coppola, S.; Vespini, V.; Battista, L.; Orlando, P.; Ferraro, P.

    2014-11-01

    Highly sensitive detection of biomolecules is of paramount interest in many fields including biomedicine, safety and eco-pollution. Conventional analyses use well-established techniques with detection limits ~1 pM. Here we propose a pyro-concentrator able to accumulate biomolecules directly onto a conventional binding surface. The operation principle is relatively simple but very effective. Tiny droplets are drawn pyro-electro-dynamically and released onto a specific site, thus increasing the sensitivity. The reliability of the technique is demonstrated in case of labelled oligonucleotides diluted serially. The results show the possibility to detect very diluted oligonucleotides, down to a few hundreds of attomoles. Excellent results are shown also in case of a sample of clinical interest, the gliadin, where a 60-fold improved detection limit is reached, compared with standard ELISA. This method could open the way to a mass-based technology for sensing molecules at very low concentrations, in environmental as well as in diagnostics applications.

  12. Dry dilute acid pretreatment by co-currently feeding of corn stover feedstock and dilute acid solution without impregnation.

    PubMed

    He, Yanqing; Zhang, Jian; Bao, Jie

    2014-04-01

    Impregnation of lignocellulose materials with dilute acid solution is a routine operation in conventional dilute acid pretreatment. The dry dilute acid pretreatment (DDAP) at high solids content up to 70% is naturally considered to require longer impregnation time. In this study, a co-currently feeding operation of corn stover and dilute sulfuric acid solution without any impregnation was tested for DDAP. The DDAP pretreated corn stover without impregnation is found to be essentially no difference in pretreatment efficiency compared to those with impregnation in the helically agitated reactor. The yield from cellulose to ethanol in SSF again shows no obvious difference between the DDAP pretreated corn stover with and without impregnation. This study suggests that impregnation in DDAP was not necessary under the helical agitation mixing. The results provided a useful way of cost reduction and process simplification in pretreatment. PMID:24630497

  13. Dry dilute acid pretreatment by co-currently feeding of corn stover feedstock and dilute acid solution without impregnation.

    PubMed

    He, Yanqing; Zhang, Jian; Bao, Jie

    2014-04-01

    Impregnation of lignocellulose materials with dilute acid solution is a routine operation in conventional dilute acid pretreatment. The dry dilute acid pretreatment (DDAP) at high solids content up to 70% is naturally considered to require longer impregnation time. In this study, a co-currently feeding operation of corn stover and dilute sulfuric acid solution without any impregnation was tested for DDAP. The DDAP pretreated corn stover without impregnation is found to be essentially no difference in pretreatment efficiency compared to those with impregnation in the helically agitated reactor. The yield from cellulose to ethanol in SSF again shows no obvious difference between the DDAP pretreated corn stover with and without impregnation. This study suggests that impregnation in DDAP was not necessary under the helical agitation mixing. The results provided a useful way of cost reduction and process simplification in pretreatment.

  14. Transfer to changed serial position in a task of tracking a sequence of light stimuli.

    PubMed

    Inui, N

    1996-06-01

    This study examined transfer when different serial positions are changed in a task of tracking a sequence of light stimuli. Thirty subjects were divided into three groups, and all tracked a serial pattern of six movements for 20 acquisition trials. Then, on 20 more transfer trials, the last two movements were reversed for Group I, the second two movements reversed for Group II, and the first two movements reversed for the Group III. Performance during the transfer trials improved over performance during the acquisition trials for Groups I and II but not Group III. Thus, there appeared to be positive transfer when the last and middle parts of the serial pattern were changed. However, there was no positive transfer when the first part of the serial pattern was changed. This indicated a contextual interference effect dependent upon serial position in the performance of a serial tracking task.

  15. Auditory word serial recall benefits from orthographic dissimilarity.

    PubMed

    Pattamadilok, Chotiga; Lafontaine, Hélène; Morais, José; Kolinsky, Régine

    2010-01-01

    The influence of orthographic knowledge has been consistently observed in dissimilarity speech recognition and metaphonological tasks. The present study provides data suggesting that such influence also pervades other cognitive domains phonological related to language abilities, such as verbal working memory. Using serial similarity effect recall of auditory seven-word lists, we observed that inter-item orthographic dissimilarity assists verbal working memory by reducing or even avoiding verbal serial recall the detrimental effect of phonological similarity. However, this orthographic modulation of the phonological similarity effect only occurred at positions four to six of the word list. Performance at position seven benefited from a recency effect that may be assumed to result from a more surface-level (acoustic-phonetic) representation, while better performance at positions one to three is attributable to primacy effects, and can be accounted for in terms of consolidation through recapitulation. The beneficial influence of orthographic knowledge may, therefore, only be apparent when the item stored in short-term memory takes the form of an abstract but unconsolidated phonological representation.

  16. Distinctiveness and serial position effects in tonal sequences.

    PubMed

    Surprenant, A M

    2001-05-01

    The proportion-of-the-total-duration rule (Kidd & Watson, 1992) states that the detectability of a change in a component of a tonal sequence can be predicted by the proportional duration of the changed component relative to the length of the sequence as a whole. A similar viewpoint relies on temporal distinctiveness to account for primacy, recency, and other serial position effects in memory (Murdock, 1960; Neath, 1993a, 1993b). Such distinctiveness models predict that an item will be remembered if it is more distinctive along some dimension relative to possible competitors. Three experiments explored the relation between distinctiveness and proportional duration by examining the effects of the proportion of the total duration of a tone in a sequence, serial position, and interstimulus interval (ISI) on the detection of a change in one component of a tonal sequence. Experiment 1 replicated the basic effect with relatively untrained subjects and a fixed frequency difference. Experiment 2 showed that distinctiveness holds for tonal sequences and a same/different task. Experiment 3 combined the two to show that proportional duration, ISI, and position of the changed tone all contribute to discrimination performance. The present research combines theories that have been proposed in the psychophysics and memory fields and suggests that a comprehensive principle based on relative distinctiveness may be able to account for both perceptual and memory effects.

  17. Forgetting in immediate serial recall: decay, temporal distinctiveness, or interference?

    PubMed

    Oberauer, Klaus; Lewandowsky, Stephan

    2008-07-01

    Three hypotheses of forgetting from immediate memory were tested: time-based decay, decreasing temporal distinctiveness, and interference. The hypotheses were represented by 3 models of serial recall: the primacy model, the SIMPLE (scale-independent memory, perception, and learning) model, and the SOB (serial order in a box) model, respectively. The models were fit to 2 experiments investigating the effect of filled delays between items at encoding or at recall. Short delays between items, filled with articulatory suppression, led to massive impairment of memory relative to a no-delay baseline. Extending the delays had little additional effect, suggesting that the passage of time alone does not cause forgetting. Adding a choice reaction task in the delay periods to block attention-based rehearsal did not change these results. The interference-based SOB fit the data best; the primacy model overpredicted the effect of lengthening delays, and SIMPLE was unable to explain the effect of delays at encoding. The authors conclude that purely temporal views of forgetting are inadequate.

  18. Determinants of phrasing effects in rat serial pattern learning.

    PubMed

    Wallace, Douglas G; Rowan, James D; Fountain, Stephen B

    2008-04-01

    Two experiments investigated how brief pauses introduced into serial patterns as phrasing cues would affect pattern learning in rats. In Experiment 1, a 24-element pattern consisted of eight 3-element chunks, whereas a 20-element pattern consisted of four 5-element chunks. In both patterns, 3.0-s temporal pauses placed at chunk boundaries (synchronous phrasing cues) facilitated learning compared to no phrasing. Cues "out of sync" with pattern structure (asynchronous phrasing cues) facilitated learning for the 24-element pattern and retarded learning for the 20-element pattern. Evidence suggested that in the latter case, 3.0-s pauses served as "blank" trials that induced rats to "skip" to the next serial position in sequence. In Experiment 2, shorter 0.5-s pauses served as phrasing cues in the 20-element pattern of Experiment 1. Synchronous short cues facilitated learning, whereas asynchronous phrasing cues had no effect. Furthermore, removal of synchronous cues produced deficits in performance on formerly cued trials, whereas removal of asynchronous cues had no effect. The results of Experiment 2 support the notion that in both experiments phrasing cues served as discriminative cues and indirectly suggest that rats are concurrently sensitive to pattern element cues, extra-sequence cues (such as phrasing cues), and to the relative timing of sequential events.

  19. Serial femtosecond crystallography: A revolution in structural biology.

    PubMed

    Martin-Garcia, Jose M; Conrad, Chelsie E; Coe, Jesse; Roy-Chowdhury, Shatabdi; Fromme, Petra

    2016-07-15

    Macromolecular crystallography at synchrotron sources has proven to be the most influential method within structural biology, producing thousands of structures since its inception. While its utility has been instrumental in progressing our knowledge of structures of molecules, it suffers from limitations such as the need for large, well-diffracting crystals, and radiation damage that can hamper native structural determination. The recent advent of X-ray free electron lasers (XFELs) and their implementation in the emerging field of serial femtosecond crystallography (SFX) has given rise to a remarkable expansion upon existing crystallographic constraints, allowing structural biologists access to previously restricted scientific territory. SFX relies on exceptionally brilliant, micro-focused X-ray pulses, which are femtoseconds in duration, to probe nano/micrometer sized crystals in a serial fashion. This results in data sets comprised of individual snapshots, each capturing Bragg diffraction of single crystals in random orientations prior to their subsequent destruction. Thus structural elucidation while avoiding radiation damage, even at room temperature, can now be achieved. This emerging field has cultivated new methods for nanocrystallogenesis, sample delivery, and data processing. Opportunities and challenges within SFX are reviewed herein.

  20. Human thermoregulatory responses during serial cold-water immersions.

    PubMed

    Castellani, J W; Young, A J; Sawka, M N; Pandolf, K B

    1998-07-01

    This study examined whether serial cold-water immersions over a 10-h period would lead to fatigue of shivering and vasoconstriction. Eight men were immersed (2 h) in 20 degrees C water three times (0700, 1100, and 1500) in 1 day (Repeat). This trial was compared with single immersions (Control) conducted at the same times of day. Before Repeat exposures at 1100 and 1500, rewarming was employed to standardize initial rectal temperature. The following observations were made in the Repeat relative to the Control trial: 1) rectal temperature was lower and heat debt was higher (P < 0.05) at 1100; 2) metabolic heat production was lower (P < 0.05) at 1100 and 1500; 3) subjects perceived the Repeat trial as warmer at 1100. These data suggest that repeated cold exposures may impair the ability to maintain normal body temperature because of a blunting of metabolic heat production, perhaps reflecting a fatigue mechanism. An alternative explanation is that shivering habituation develops rapidly during serially repeated cold exposures. PMID:9655776

  1. Rethinking Conceptual Definitions of the Criminal Career and Serial Criminality.

    PubMed

    Edelstein, Arnon

    2016-01-01

    Since Cesare Lombroso's days, criminology seeks to define, explain, and categorize the various types of criminals, their behaviors, and motives. This aim has theoretical as well as policy-related implications. One of the important areas in criminological thinking focuses chiefly on recidivist offenders who perform large numbers of crimes and/or commit the most dangerous crimes in society (rape, murder, arson, and armed robbery). These criminals have been defined as "habitual offenders," "professional criminals," "career criminals," and "serial offenders." The interest in these criminals is a rational one, given the perception that they present a severe threat to society. The main challenge in this area of research is a conceptual problem that has significant effects across the field. To this day, scholars have reused and misused titles to define and explain different concepts. The aim of this article is 3-fold. First, to review the concepts of criminal career, professional crime, habitual offenses, and seriality with a critical attitude on confusing terms. Second, to propose the redefinition of concepts mentioned previously, mainly on the criminal career. Third, to propose a theoretical model to enable a better understanding of, and serve as a basis for, further research in this important area of criminology.

  2. Serial Determinations of Blood Lactate in Respiratory Distress Syndrome

    PubMed Central

    Beca, J. P.; Scopes, J. W.

    1972-01-01

    Blood lactate was measured 4-hourly in 21 newborn babies with respiratory distress syndrome, of whom 13 survived and 8 died. In general, lactate levels were higher in babies who died than in survivors, but there were inconsistencies which were uninterpretable if only a single estimation were made in a baby. Analysis of serial determinations showed that all patients in whom the lactate level never exceeded 35 mg/100 ml survived, and babies with high but falling values also did well. Only those who had rising lactate values, even if initially normal, died. In most cases a high or normal Pao2 was associated with normal or decreasing lactate level; but babies with Pao2 below 60 mmHg had often also normal or decreasing lactate levels. Some babies had high and increasing lactate levels despite having normal Pao2. In order to use lactate levels for prognosis in respiratory distress syndrome (RDS) serial determinations are required. It is concluded that there may be a wide range of hypoxaemia without oxygen deficit in body tissues, so that it is not possible to define a `lower acceptable Pao2' which will define adequate tissue oxygenation. PMID:5046772

  3. Forgetting in immediate serial recall: decay, temporal distinctiveness, or interference?

    PubMed

    Oberauer, Klaus; Lewandowsky, Stephan

    2008-07-01

    Three hypotheses of forgetting from immediate memory were tested: time-based decay, decreasing temporal distinctiveness, and interference. The hypotheses were represented by 3 models of serial recall: the primacy model, the SIMPLE (scale-independent memory, perception, and learning) model, and the SOB (serial order in a box) model, respectively. The models were fit to 2 experiments investigating the effect of filled delays between items at encoding or at recall. Short delays between items, filled with articulatory suppression, led to massive impairment of memory relative to a no-delay baseline. Extending the delays had little additional effect, suggesting that the passage of time alone does not cause forgetting. Adding a choice reaction task in the delay periods to block attention-based rehearsal did not change these results. The interference-based SOB fit the data best; the primacy model overpredicted the effect of lengthening delays, and SIMPLE was unable to explain the effect of delays at encoding. The authors conclude that purely temporal views of forgetting are inadequate. PMID:18729591

  4. Random-effects models for serial observations with binary response

    SciTech Connect

    Stiratelli, R.; Laird, N.; Ware, J.H.

    1984-12-01

    This paper presents a general mixed model for the analysis of serial dichotomous responses provided by a panel of study participants. Each subject's serial responses are assumed to arise from a logistic model, but with regression coefficients that vary between subjects. The logistic regression parameters are assumed to be normally distributed in the population. Inference is based upon maximum likelihood estimation of fixed effects and variance components, and empirical Bayes estimation of random effects. Exact solutions are analytically and computationally infeasible, but an approximation based on the mode of the posterior distribution of the random parameters is proposed, and is implemented by means of the EM algorithm. This approximate method is compared with a simpler two-step method proposed by Korn and Whittemore, using data from a panel study of asthmatics originally described in that paper. One advantage of the estimation strategy described here is the ability to use all of the data, including that from subjects with insufficient data to permit fitting of a separate logistic regression model, as required by the Korn and Whittemore method. However, the new method is computationally intensive.

  5. Semantic contribution to verbal short-term memory: are pleasant words easier to remember than neutral words in serial recall and serial recognition?

    PubMed

    Monnier, Catherine; Syssau, Arielle

    2008-01-01

    In the four experiments reported here, we examined the role of word pleasantness on immediate serial recall and immediate serial recognition. In Experiment 1, we compared verbal serial recall of pleasant and neutral words, using a limited set of items. In Experiment 2, we replicated Experiment 1 with an open set of words (i.e., new items were used on every trial). In Experiments 3 and 4, we assessed immediate serial recognition of pleasant and neutral words, using item sets from Experiments 1 and 2. Pleasantness was found to have a facilitation effect on both immediate serial recall and immediate serial recognition. This study supplies some new supporting arguments in favor of a semantic contribution to verbal short-term memory performance. The pleasantness effect observed in immediate serial recognition showed that, contrary to a number of earlier findings, performance on this task can also turn out to be dependent on semantic factors. The results are discussed in relation to nonlinguistic and psycholinguistic models of short-term memory.

  6. Modeling syngas-fired gas turbine engines with two dilutants

    NASA Astrophysics Data System (ADS)

    Hawk, Mitchell E.

    2011-12-01

    Prior gas turbine engine modeling work at the University of Wyoming studied cycle performance and turbine design with air and CO2-diluted GTE cycles fired with methane and syngas fuels. Two of the cycles examined were unconventional and innovative. The work presented herein reexamines prior results and expands the modeling by including the impacts of turbine cooling and CO2 sequestration on GTE cycle performance. The simple, conventional regeneration and two alternative regeneration cycle configurations were examined. In contrast to air dilution, CO2 -diluted cycle efficiencies increased by approximately 1.0 percentage point for the three regeneration configurations examined, while the efficiency of the CO2-diluted simple cycle decreased by approximately 5.0 percentage points. For CO2-diluted cycles with a closed-exhaust recycling path, an optimum CO2-recycle pressure was determined for each configuration that was significantly lower than atmospheric pressure. Un-cooled alternative regeneration configurations with CO2 recycling achieved efficiencies near 50%, which was approximately 3.0 percentage points higher than the conventional regeneration cycle and simple cycle configurations that utilized CO2 recycling. Accounting for cooling of the first two turbine stages resulted in a 2--3 percentage point reduction in un-cooled efficiency, with air dilution corresponding to the upper extreme. Additionally, when the work required to sequester CO2 was accounted for, cooled cycle efficiency decreased by 4--6 percentage points, and was more negatively impacted when syngas fuels were used. Finally, turbine design models showed that turbine blades are shorter with CO2 dilution, resulting in fewer design restrictions.

  7. New developments in electron microscopy for serial image acquisition of neuronal profiles.

    PubMed

    Kubota, Yoshiyuki

    2015-02-01

    Recent developments in electron microscopy largely automate the continuous acquisition of serial electron micrographs (EMGs), previously achieved by laborious manual serial ultrathin sectioning using an ultramicrotome and ultrastructural image capture process with transmission electron microscopy. The new systems cut thin sections and capture serial EMGs automatically, allowing for acquisition of large data sets in a reasonably short time. The new methods are focused ion beam/scanning electron microscopy, ultramicrotome/serial block-face scanning electron microscopy, automated tape-collection ultramicrotome/scanning electron microscopy and transmission electron microscope camera array. In this review, their positive and negative aspects are discussed.

  8. Management of serial ECGs and control strategies for the comparison process.

    PubMed

    Fayn, J; Rubel, P; Willems, J L

    1994-03-01

    Serial ECG management and control of the comparison process should be dynamically driven by patient data. The functional architecture requirements are specified for a computerized ECG processing system integrating serial analysis. The concepts of reference investigations and temporal events are first explained. A conceptual reference model is proposed which stratifies the serial analysis process into a few generic strategies which will be instantiated into several types of serial comparison processing tasks as a function of the clinical evolution of the patient. This model is an extension of the OEDIPE core data model developed and implemented during the AIM #2026 project.

  9. Serial agonistic attacks by greylag goose families, Anser anser, against the same opponent

    PubMed Central

    Scheiber, Isabella B.R.; Kotrschal, Kurt; Weiß, Brigitte M.

    2011-01-01

    It is known from primates that alliance partners may support each other’s interests in competition with others, for example, through repeated agonistic attacks against a particular individual. We examined serial aggressive interactions between greylag goose families and other flock members. We found that repeated attacks towards the same individual were common and that up to five serial attacks by family members followed an initial attack. Family size did not affect the frequency of such serial attacks. Juvenile geese evidently benefited most from active social support through serial attacks. About 60% of the juveniles’ lost primary interactions were subsequently reversed by another family member. This may be one of the reasons why juveniles rank higher in the social hierarchy than would be expected from their age and size alone. Losses in serial attacks predominantly occurred against other, presumably higher-ranking, family geese and ganders. We propose three major functions/consequences of serial attacks. Analogous to primates, serial attacks in greylag geese may serve to reinforce a losing experience of an opponent defeated in a preceding attack. On the side of the winning family, serial attacks may reinforce the experience of winning. Both winning and losing experiences are linked with physiological consequences in higher vertebrates, affecting the future social performance of winners or losers. Finally, serial attacks may signal the agonistic potential of a family to other flock members. This is supported by heart rate data, which indicate that greylags are competent to interpret third-party relationships. PMID:21984838

  10. New developments in electron microscopy for serial image acquisition of neuronal profiles.

    PubMed

    Kubota, Yoshiyuki

    2015-02-01

    Recent developments in electron microscopy largely automate the continuous acquisition of serial electron micrographs (EMGs), previously achieved by laborious manual serial ultrathin sectioning using an ultramicrotome and ultrastructural image capture process with transmission electron microscopy. The new systems cut thin sections and capture serial EMGs automatically, allowing for acquisition of large data sets in a reasonably short time. The new methods are focused ion beam/scanning electron microscopy, ultramicrotome/serial block-face scanning electron microscopy, automated tape-collection ultramicrotome/scanning electron microscopy and transmission electron microscope camera array. In this review, their positive and negative aspects are discussed. PMID:25564566

  11. Quantitative single serum-dilution liquid phase competitive blocking ELISA for the assessment of herd immunity and expected protection against foot-and-mouth disease virus in vaccinated cattle.

    PubMed

    Robiolo, Blanca; La Torre, José; Duffy, Sergio; Leon, Emilio; Seki, Cristina; Torres, Adriana; Mattion, Nora

    2010-06-01

    A single serum-dilution liquid phase ELISA (slpELISA) was standardized to be used for serological evaluation of herd immunity against foot-and-mouth disease. The absorbance value at a dilution 1:64 of each serum sample was interpolated in a standard curve by plotting the antibody titers of six control sera determined by end point dilution liquid phase ELISA (lpELISA), against the absorbance values for the same control sera at 1:64 dilutions. A straight line was obtained by linear regression analysis (r>0.90) in the titer range of 1.40-2.40. The reliability of the antibody titers was confirmed by the simultaneous titration of 60 cattle sera by slpELISA and lpELISA, which showed an acceptable correlation (R(2)>0.87) for viral strains A24/Cruzeiro, A/Argentina/01, O1/Campos and C3/Indaial. Titers obtained by both methods were not significantly different (p>0.05), thus confirming that slpELISA could be used successfully to replace the conventional serial dilution ELISA for the assessment of protection status of cattle in epidemiological studies. In addition, this quantitative slpELISA provides an adequate method for monitoring the effectiveness of vaccination campaigns and is also suitable for the assessment of seroconversion of naive animals during early stages of infection.

  12. Quantitative single serum-dilution liquid phase competitive blocking ELISA for the assessment of herd immunity and expected protection against foot-and-mouth disease virus in vaccinated cattle.

    PubMed

    Robiolo, Blanca; La Torre, José; Duffy, Sergio; Leon, Emilio; Seki, Cristina; Torres, Adriana; Mattion, Nora

    2010-06-01

    A single serum-dilution liquid phase ELISA (slpELISA) was standardized to be used for serological evaluation of herd immunity against foot-and-mouth disease. The absorbance value at a dilution 1:64 of each serum sample was interpolated in a standard curve by plotting the antibody titers of six control sera determined by end point dilution liquid phase ELISA (lpELISA), against the absorbance values for the same control sera at 1:64 dilutions. A straight line was obtained by linear regression analysis (r>0.90) in the titer range of 1.40-2.40. The reliability of the antibody titers was confirmed by the simultaneous titration of 60 cattle sera by slpELISA and lpELISA, which showed an acceptable correlation (R(2)>0.87) for viral strains A24/Cruzeiro, A/Argentina/01, O1/Campos and C3/Indaial. Titers obtained by both methods were not significantly different (p>0.05), thus confirming that slpELISA could be used successfully to replace the conventional serial dilution ELISA for the assessment of protection status of cattle in epidemiological studies. In addition, this quantitative slpELISA provides an adequate method for monitoring the effectiveness of vaccination campaigns and is also suitable for the assessment of seroconversion of naive animals during early stages of infection. PMID:20170683

  13. Evaluation of heavy water for indicator dilution cardiac output measurement

    SciTech Connect

    Schreiner, M.S.; Leksell, L.G.; Neufeld, G.R. )

    1989-10-01

    We evaluated deuterium oxide (D2O) as a tracer for cardiac output measurements. Cardiac output measurements made by thermodilution were compared with those made by indicator dilution with D2O and indocyanine green as tracers. Five triplicate measurements for each method were made at intervals of 30 minutes in each of 9 anesthetized, mechanically ventilated goats. Cardiac output ranged between 0.68 and 3.79 L/min. The 45 data points yielded a correlation coefficient of 0.948 for the comparison of D2O indicator dilution cardiac output measurements with thermodilution measurements and a linear regression slope of 1.046. D2O indicator dilution measurements were biased by -0.11 +/- 0.22 L/min compared with thermodilution measurements and had a standard deviation of +/- 0.12 L/min for triplicate measurements. Hematocrits ranging between 20 and 50 vol% had no effect on optical density for D2O. D2O is more stable than indocyanine green and approximately one-tenth the price (40 cents per injection compared with $4). The basic instrumentation cost of approximately $9,000 is an additional initial expense, but provides the ability to perform pulmonary extravascular water measurements with a double-indicator dilution technique. D2O has potential as a tracer for the clinical determination of indicator dilution cardiac output measurements and pulmonary extravascular water measurements.

  14. [Formation of oxalate in oxaliplatin injection diluted with infusion solutions].

    PubMed

    Eto, Seiji; Yamamoto, Kie; Shimazu, Kounosuke; Sugiura, Toshimune; Baba, Kaori; Sato, Ayaka; Goromaru, Takeshi; Hagiwara, Yoshiaki; Hara, Keiko; Shinohara, Yoshitake; Takahashi, Kojiro

    2014-01-01

    Oxaliplatin use can cause acute peripheral neuropathy characterized by sensory paresthesias, which are markedly exacerbated by exposure to cold temperatures, and is a dose-limiting factor in the treatment of colorectal cancer.Oxalate is eliminated in a series of nonenzymatic conversions of oxaliplatin in infusion solutions or biological fluids.Elimination of oxalate from oxaliplatin has been suggested as one of the reasons for the development of acute neuropathy.In this study, we developed a high-performance liquid chromatography(HPLC)-based method to detect oxalate formation, and investigated the time dependent formation of oxalate in oxaliplatin diluted with infusion solutions.The results obtained showed that the amount of oxalate in the solution corresponded to 1.6% of oxaliplatin 8 h after oxaliplatin dilution with a 5% glucose solution. On the other hand, oxalate formation from oxaliplatin diluted with a saline solution was ten-fold higher than that from oxaliplatin diluted with the 5% glucose solution.Most patients who were intravenously injected with oxaliplatin experienced venous pain.As a preventive measure against venous pain, dexamethasone was added to the oxaliplatin injection.We measured the amount of oxalate formed in the dexamethasone-containing oxaliplatin injection diluted with a 5% glucose solution.The amount of oxalate formed when dexamethasone was added did not differ significantly from that formed when dexamethasone was not added.Thus, there are no clinical problems associated with the stability of oxaliplatin solutions.

  15. Mobile Melt-Dilute Treatment for Russian Spent Nuclear Fuel

    SciTech Connect

    Peacock, H.

    2002-09-17

    Treatment of spent Russian fuel using a Melt-Dilute (MD) process is proposed to consolidate fuel assemblies into a form that is proliferation resistant and provides critically safety under storage and disposal configurations. Russian fuel elements contain a variety of fuel meat and cladding materials. The Melt-Dilute treatment process was initially developed for aluminum-based fuels so additional development is needed for several cladding and fuel meat combinations in the Russian fuel inventory (e.g. zirconium-clad, uranium-zirconium alloy fuel). A Mobile Melt-Dilute facility (MMD) is being proposed for treatment of spent fuels at reactor site storage locations in Russia; thereby, avoiding the costs of building separate treatment facilities at each site and avoiding shipment of enriched fuel assemblies over the road. The MMD facility concept is based on laboratory tests conducted at the Savannah River Technology Center (SRTC), and modular pilot-scale facilities constructed at the Savannah River Site for treatment of US spent fuel. SRTC laboratory tests have shown the feasibility of operating a Melt-Dilute treatment process with either a closed system or a filtered off-gas system. The proposed Mobile Melt-Dilute process is presented in this paper.

  16. Canine bone blood flow measurements using serial microsphere injections.

    PubMed

    McGrory, B J; Moran, C G; Bronk, J; Weaver, A L; Wood, M B

    1994-06-01

    The objective of this study was to determine the reproducibility of serial bone blood flow (BBF) quantitation using multiple microsphere injections. Three consecutive estimates of BBF were obtained, using 15-mu radionuclide-labeled microspheres from 21 anesthetized adult dogs. A dose of 3 million spheres/kg was used in seven dogs (Cohort 1); a dose of 0.5 million spheres/kg was used in the remaining 14 dogs (Cohorts 2 and 3). Estimates of BBF were made at an average of 129, 153, and 175 minutes after the animals had been anesthetized in the first two cohorts and 179, 203, and 225 minutes in Cohort 3. The dogs in Cohort 1 had no surgical intervention; the dogs in Cohorts 2 and 3 had increasingly complex surgical interventions. Despite stabilization of cardiovascular status, BBF was found to vary by 33.4% in Cohort 1, 25.7% in Cohort 2, and 42.5% in Cohort 3 over the three injections. Cortical BBF fell by 13.9%, 12.1%, and 12.4% between the first and second, and by 31.0%, 11.2%, and 29.9% between the second and third estimates for Cohorts 1, 2, and 3, respectively. Variation in right to left blood flow was used as an overall measure of error caused by technique and did not consistently increase between the first, second, or third BBF estimates in any cohort. Cortical BBF data were found to be significantly more reliable than cancellous data (p < 0.01); error caused by technique was least in the midshaft femoral or midshaft humeral cortical samples. Increasing the dose of spheres administered from 0.5 to 3 million/kg for three serial microsphere injections increased the number of reliable samples and did not lead to increased technical error or shunting. This study demonstrates that there is a significant decrease in BBF over time in the anesthetized dog; therefore, serial estimates of BBF can only be interpreted if the results are normalized or if a control group of animals is included.

  17. Examining the relationship between free recall and immediate serial recall: the serial nature of recall and the effect of test expectancy.

    PubMed

    Bhatarah, Parveen; Ward, Geoff; Tan, Lydia

    2008-01-01

    In two experiments, we examined the relationship between free recall and immediate serial recall (ISR), using a within-subjects (Experiment 1) and a between-subjects (Experiment 2) design. In both experiments, participants read aloud lists of eight words and were precued or postcued to respond using free recall or ISR. The serial position curves were U-shaped for free recall and showed extended primacy effects with little or no recency for ISR, and there was little or no difference between recall for the precued and the postcued conditions. Critically, analyses of the output order showed that although the participants started their recall from different list positions in the two tasks, the degree to which subsequent recall was serial in a forward order was strikingly similar. We argue that recalling in a serial forward order is a general characteristic of memory and that performance on ISR and free recall is underpinned by common memory mechanisms.

  18. The primacy model: a new model of immediate serial recall.

    PubMed

    Page, M P; Norris, D

    1998-10-01

    A new model of immediate serial recall is presented: the primacy model. The primacy model stores order information by means of the assumption that the strength of activation of successive list items decreases across list position to form a primacy gradient. Ordered recall is supported by a repeated cycle of operations involving a noisy choice of the most active item followed by suppression of the chosen item. Word-length and list-length effects are attributed to a decay process that occurs both during input, when effective rehearsal is prevented, and during output. The phonological similarity effect is attributed to a second stage of processing at which phonological confusions occur. The primacy model produces accurate simulations of the effects of word length, list length, and phonological similarity.

  19. Serial position functions for recognition of olfactory stimuli.

    PubMed

    Johnson, Andrew J; Miles, Christopher

    2007-10-01

    Two experiments examined item recognition memory for sequentially presented odours. Following a sequence of six odours participants were immediately presented with a series of two-alternative forced-choice (2AFC) test odours. The test pairs were presented in either the same order as learning or the reverse order of learning. Method of testing was either blocked (Experiment 1) or mixed (Experiment 2). Both experiments demonstrated extended recency, with an absence of primacy, for the reverse testing procedure. In contrast, the forward testing procedure revealed a null effect of serial position. The finding of extended recency is inconsistent with the single-item recency predicted by the two-component duplex theory (Phillips & Christie, 1977). We offer an alternative account of the data in which recognition accuracy is better accommodated by the cumulative number of items presented between item learning and item test.

  20. Immediate serial recall, word frequency, item identity and item position.

    PubMed

    Poirier, M; Saint-Aubin, J

    1996-12-01

    Eighteen subjects completed an immediate serial recall task, where the to-be-recalled lists consisted of either high, medium, or low-frequency items. Moreover, lists were either phonologically similar or distinct. Results showed that increasing frequency enhanced item information recall but had no effect on order recall. Conversely, increasing phonological similarity had a detrimental effect on order recall but no significant effect on item recall. It is argued that both effects reflect retrieval processes where degraded representations are reconstructed on the basis of long-term knowledge: Low-frequency words have reduced accessibility, lowering the probability of correct reconstruction, and phonologically similar items are more easily confused with other recall candidates.