Science.gov

Sample records for 10-m digital elevation

  1. Digital Elevation Models

    USGS Publications Warehouse

    ,

    1993-01-01

    The Earth Science Information Center (ESIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is the line map information in digital form. These data files include information on base data categories, such as transportation, hypsography, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The third type is Land Use and Land Cover digital data which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

  2. 1-Meter Digital Elevation Model specification

    USGS Publications Warehouse

    Arundel, Samantha T.; Archuleta, Christy-Ann M.; Phillips, Lori A.; Roche, Brittany L.; Constance, Eric W.

    2015-10-21

    In January 2015, the U.S. Geological Survey National Geospatial Technical Operations Center began producing the 1-Meter Digital Elevation Model data product. This new product was developed to provide high resolution bare-earth digital elevation models from light detection and ranging (lidar) elevation data and other elevation data collected over the conterminous United States (lower 48 States), Hawaii, and potentially Alaska and the U.S. territories. The 1-Meter Digital Elevation Model consists of hydroflattened, topographic bare-earth raster digital elevation models, with a 1-meter x 1-meter cell size, and is available in 10,000-meter x 10,000-meter square blocks with a 6-meter overlap. This report details the specifications required for the production of the 1-Meter Digital Elevation Model.

  3. 1-Meter Digital Elevation Model specification

    USGS Publications Warehouse

    Arundel, Samantha T.; Archuleta, Christy-Ann M.; Phillips, Lori A.; Roche, Brittany L.; Constance, Eric W.

    2015-01-01

    In January 2015, the U.S. Geological Survey National Geospatial Technical Operations Center began producing the 1-Meter Digital Elevation Model data product. This new product was developed to provide high resolution bare-earth digital elevation models from light detection and ranging (lidar) elevation data and other elevation data collected over the conterminous United States (lower 48 States), Hawaii, and potentially Alaska and the U.S. territories. The 1-Meter Digital Elevation Model consists of hydroflattened, topographic bare-earth raster digital elevation models, with a 1-meter x 1-meter cell size, and is available in 10,000-meter x 10,000-meter square blocks with a 6-meter overlap. This report details the specifications required for the production of the 1-Meter Digital Elevation Model.

  4. US GeoData Digital Elevation Models

    USGS Publications Warehouse

    ,

    2000-01-01

    Digital elevation model (DEM) data are arrays of regularly spaced elevation values referenced horizontally either to a Universal Transverse Mercator (UTM) projection or to a geographic coordinate system. The grid cells are spaced at regular intervals along south to north profiles that are ordered from west to east. The U.S. Geological Survey (USGS) produces five primary types of elevation data: 7.5-minute DEM, 30-minute DEM, 1-degree DEM, 7.5-minute Alaska DEM, and 15-minute Alaska DEM.

  5. Stochastic Downscaling of Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Rasera, Luiz Gustavo; Mariethoz, Gregoire; Lane, Stuart N.

    2016-04-01

    High-resolution digital elevation models (HR-DEMs) are extremely important for the understanding of small-scale geomorphic processes in Alpine environments. In the last decade, remote sensing techniques have experienced a major technological evolution, enabling fast and precise acquisition of HR-DEMs. However, sensors designed to measure elevation data still feature different spatial resolution and coverage capabilities. Terrestrial altimetry allows the acquisition of HR-DEMs with centimeter to millimeter-level precision, but only within small spatial extents and often with dead ground problems. Conversely, satellite radiometric sensors are able to gather elevation measurements over large areas but with limited spatial resolution. In the present study, we propose an algorithm to downscale low-resolution satellite-based DEMs using topographic patterns extracted from HR-DEMs derived for example from ground-based and airborne altimetry. The method consists of a multiple-point geostatistical simulation technique able to generate high-resolution elevation data from low-resolution digital elevation models (LR-DEMs). Initially, two collocated DEMs with different spatial resolutions serve as an input to construct a database of topographic patterns, which is also used to infer the statistical relationships between the two scales. High-resolution elevation patterns are then retrieved from the database to downscale a LR-DEM through a stochastic simulation process. The output of the simulations are multiple equally probable DEMs with higher spatial resolution that also depict the large-scale geomorphic structures present in the original LR-DEM. As these multiple models reflect the uncertainty related to the downscaling, they can be employed to quantify the uncertainty of phenomena that are dependent on fine topography, such as catchment hydrological processes. The proposed methodology is illustrated for a case study in the Swiss Alps. A swissALTI3D HR-DEM (with 5 m resolution

  6. A global digital elevation model - GTOP030

    USGS Publications Warehouse

    1999-01-01

    GTOP030, the U.S. Geological Survey's (USGS) digital elevation model (DEM) of the Earth, provides the flrst global coverage of moderate resolution elevation data.  The original GTOP30 data set, which was developed over a 3-year period through a collaborative effort led by the USGS, was completed in 1996 at the USGS EROS Data Center in Sioux Falls, South Dakota.  The collaboration involved contributions of staffing, funding, or source data from cooperators including the National Aeronautics and Space Administration (NASA), the United Nations Environment Programme Global Resource Information Database (UNEP/GRID), the U.S. Agency for International Development (USAID), the Instituto Nacional de Estadistica Geografia e Informatica (INEGI) of Mexico, the Geographical Survey Institute (GSI) of Japan, Manaaki Whenua Landcare Research of New Zealand, and the Scientific Committee on Antarctic Research (SCAR). In 1999, work was begun on an update to the GTOP030 data set. Additional data sources are being incorporated into GTOP030 with an enhanced and improved data set planned for release in 2000.

  7. Digital Elevation Models of the Lunar Surface

    NASA Astrophysics Data System (ADS)

    Cook, A. C.; Robinson, M. S.

    1999-01-01

    Several digital elevation models (DEMs) have been produced at a scale of 1km/pixel and covering approximately one-fifth of the lunar surface. These were produced mostly by semiautomatically matching the stereo available between Clementine UV/VIS images, although some localized DEMs have been produced by applying this technique to Apollo Metric stereo pairs, or by digitizing an existing Apollo Metric contour map. The DEMS that result from Clementine UV/VIS images, although Of Poorer height accuracy (1300-600 in for a single matched point) than the Clementine laser altimeter point measurements (<+/-100 m), do provide considerably higher spatial resolution (e.g., every kilometer vs. every tens of kilometers) and allow topography in the polar regions to be determined. Nadir-pointing Clementine UV-VIS stereo pairs are automatically stereo matched using a patch-based matcher and fed through A stereo intersection camera model to yield a digital terrain model (DTM) of longitude, latitude, and height points. The DTM for each stereo pair is then replotted and interpolated to form map-projected DEM tiles. The DEM files can then be fitted to absolute height laser altimeter points, or iteratively to each other, to form a DEM mosaic. Uncertainties in UV-VIS camera pointing and the need to accumulate a sufficiently good topographic S/N ratio necessitates the use of 1 km pixels for the UV-VIS derived DEMs. For Apollo Metric stereo, an internal camera geometry correction and a full photogrammetric block adjustment must be performed using ground- control points to derive a DEM. The image scale of Apollo Metric, as well as the stereo angle, allow for a DEM with 100 m pixels and a height accuracy of +/- 25m. Apollo Metric imagery had previously been used to derive contour maps for much of the lunar equatorial regions; however, to recover this information in digital form these maps must be digitized. Most of the mare areas mapped contain noticeable topographic noise. This results from

  8. Evaluation Digital Elevation Model Generated by Synthetic Aperture Radar Data

    NASA Astrophysics Data System (ADS)

    Makineci, H. B.; Karabörk, H.

    2016-06-01

    Digital elevation model, showing the physical and topographical situation of the earth, is defined a tree-dimensional digital model obtained from the elevation of the surface by using of selected an appropriate interpolation method. DEMs are used in many areas such as management of natural resources, engineering and infrastructure projects, disaster and risk analysis, archaeology, security, aviation, forestry, energy, topographic mapping, landslide and flood analysis, Geographic Information Systems (GIS). Digital elevation models, which are the fundamental components of cartography, is calculated by many methods. Digital elevation models can be obtained terrestrial methods or data obtained by digitization of maps by processing the digital platform in general. Today, Digital elevation model data is generated by the processing of stereo optical satellite images, radar images (radargrammetry, interferometry) and lidar data using remote sensing and photogrammetric techniques with the help of improving technology. One of the fundamental components of remote sensing radar technology is very advanced nowadays. In response to this progress it began to be used more frequently in various fields. Determining the shape of topography and creating digital elevation model comes the beginning topics of these areas. It is aimed in this work , the differences of evaluation of quality between Sentinel-1A SAR image ,which is sent by European Space Agency ESA and Interferometry Wide Swath imaging mode and C band type , and DTED-2 (Digital Terrain Elevation Data) and application between them. The application includes RMS static method for detecting precision of data. Results show us to variance of points make a high decrease from mountain area to plane area.

  9. Digital elevation modeling via curvature interpolation for lidar data

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Digital elevation model (DEM) is a three-dimensional (3D) representation of a terrain's surface - for a planet (including Earth), moon, or asteroid - created from point cloud data which measure terrain elevation. Its modeling requires surface reconstruction for the scattered data, which is an ill-p...

  10. Probabilistic Digital Elevation Model Generation For Spatial Accuracy Assessment

    NASA Astrophysics Data System (ADS)

    Jalobeanu, A.

    2008-12-01

    We propose a new method for the measurement of high resolution topography from a stereo pair. The main application area is the study of planetary surfaces. Digital elevation models (DEM) computed from image pairs using state of the art algorithms usually lack quantitative error estimates. This can be a major issue when the result is used to measure actual physical parameters, such as slope or terrain roughness. Thus, we propose a new method to infer a dense bidimensional disparity map from two images, that also estimates the spatial distribution of errors. We adopt a probabilistic approach, which provides a rigorous framework for parameter estimation and uncertainty evaluation. All the parameters are described in terms of random variables within a Bayesian framework. We start by defining a forward model, which mainly consists of warping the observed scene using B-Splines and using a spatially adaptive radiometric change map for robustness purposes. An a priori smoothness model is introduced in order to stabilize the solution. Solving the inverse problem to recover the disparity map requires to optimize a global non-convex energy function, which is difficult in practice due to multiple local optima. A deterministic optimization technique based on a multi-grid strategy, followed by a local energy analysis at the optimum, allows to recover the a posteriori probability density function (pdf) of the disparity, which encodes both the optimal solution and the related error map. Finally, the disparity field is converted into a DEM through a geometric camera model. This camera model is either known initially, or calibrated automatically using the estimated disparity map and available measurements of the topography (existing low-resolution DEM or ground control points). Automatic calibration from uncertain disparity and topography measurements allows for efficient error propagation from the initial data to the generated elevation model. Results from Mars Express HRSC data

  11. Carving and adaptive drainage enforcement of grid digital elevation models

    NASA Astrophysics Data System (ADS)

    Soille, Pierre; Vogt, Jürgen; Colombo, Roberto

    2003-12-01

    An effective and widely used method for removing spurious pits in digital elevation models consists of filling them until they overflow. However, this method sometimes creates large flat regions which in turn pose a problem for the determination of accurate flow directions. In this study, we propose to suppress each pit by creating a descending path from it to the nearest point having a lower elevation value. This is achieved by carving, i.e., lowering, the terrain elevations along the detected path. Carving paths are identified through a flooding simulation starting from the river outlets. The proposed approach allows for adaptive drainage enforcement whereby river networks coming from other data sources are imposed to the digital elevation model only in places where the automatic river network extraction deviates substantially from the known networks. An improvement to methods for routing flow over flat regions is also introduced. Detailed results are presented over test areas of the Danube basin.

  12. The effects of wavelet compression on Digital Elevation Models (DEMs)

    USGS Publications Warehouse

    Oimoen, M.J.

    2004-01-01

    This paper investigates the effects of lossy compression on floating-point digital elevation models using the discrete wavelet transform. The compression of elevation data poses a different set of problems and concerns than does the compression of images. Most notably, the usefulness of DEMs depends largely in the quality of their derivatives, such as slope and aspect. Three areas extracted from the U.S. Geological Survey's National Elevation Dataset were transformed to the wavelet domain using the third order filters of the Daubechies family (DAUB6), and were made sparse by setting 95 percent of the smallest wavelet coefficients to zero. The resulting raster is compressible to a corresponding degree. The effects of the nulled coefficients on the reconstructed DEM are noted as residuals in elevation, derived slope and aspect, and delineation of drainage basins and streamlines. A simple masking technique also is presented, that maintains the integrity and flatness of water bodies in the reconstructed DEM.

  13. The Rational Polynomial Coefficients Modification Using Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Alidoost, F.; Azizi, A.; Arefi, H.

    2015-12-01

    The high-resolution satellite imageries (HRSI) are as primary dataset for different applications such as DEM generation, 3D city mapping, change detection, monitoring, and deformation detection. The geo-location information of HRSI are stored in metadata called Rational Polynomial Coefficients (RPCs). There are many methods to improve and modify the RPCs in order to have a precise mapping. In this paper, an automatic approach is presented for the RPC modification using global Digital Elevation Models. The main steps of this approach are: relative digital elevation model generation, shift parameters calculation, sparse point cloud generation and shift correction, and rational polynomial fitting. Using some ground control points, the accuracy of the proposed method is evaluated based on statistical descriptors in which the results show that the geo-location accuracy of HRSI can be improved without using Ground Control Points (GCPs).

  14. Shaded relief map of US topography from digital elevations

    USGS Publications Warehouse

    Pike, R.J.; Thelin, G.P.

    1989-01-01

    Much geologic and geophysical information that lies encoded within land surface form can be revealed by image processing large files of digitized elevations in fast machines and mapping the results. This convergence of computers, analytic software, data, and output devices has created exciting opportunities for automating the numerical and spatial study of topography. One recent result is the accompanying shaded relief map of the conterminous 48 states. -from Authors

  15. Extraction of terrain features from digital elevation models

    USGS Publications Warehouse

    Price, Curtis V.; Wolock, David M.; Ayers, Mark A.

    1989-01-01

    Digital elevation models (DEMs) are being used to determine variable inputs for hydrologic models in the Delaware River basin. Recently developed software for analysis of DEMs has been applied to watershed and streamline delineation. The results compare favorably with similar delineations taken from topographic maps. Additionally, output from this software has been used to extract other hydrologic information from the DEM, including flow direction, channel location, and an index describing the slope and shape of a watershed.

  16. Digital elevation model visibility including Earth's curvature and atmosphere refraction

    NASA Astrophysics Data System (ADS)

    Santossilva, Ewerton; Vieiradias, Luiz Alberto

    1990-03-01

    There are some instances in which the Earth's curvature and the atmospheric refraction, optical or electronic, are important factors when digital elevation models are used for visibility calculations. This work deals with this subject, suggesting a practical approach to solve this problem. Some examples, from real terrain data, are presented. The equipment used was an IBM-PC like computer with a SITIM graphic card.

  17. Accuracy Assessment of Digital Elevation Models Using GPS

    NASA Astrophysics Data System (ADS)

    Farah, Ashraf; Talaat, Ashraf; Farrag, Farrag A.

    2008-01-01

    A Digital Elevation Model (DEM) is a digital representation of ground surface topography or terrain with different accuracies for different application fields. DEM have been applied to a wide range of civil engineering and military planning tasks. DEM is obtained using a number of techniques such as photogrammetry, digitizing, laser scanning, radar interferometry, classical survey and GPS techniques. This paper presents an assessment study of DEM using GPS (Stop&Go) and kinematic techniques comparing with classical survey. The results show that a DEM generated from (Stop&Go) GPS technique has the highest accuracy with a RMS error of 9.70 cm. The RMS error of DEM derived by kinematic GPS is 12.00 cm.

  18. Generation of a new Greenland Ice Sheet Digital Elevation Model

    NASA Astrophysics Data System (ADS)

    Nagarajan, S.; Csatho, B. M.; Schenk, A. F.; Babonis, G. S.; Scambos, T. A.; Haran, T. M.; Kjaer, K. H.; Korsgaard, N. J.

    2011-12-01

    Currently available Digital Elevation Models(DEMs) of the Greenland Ice Sheet (GrIS) were originally derived from radar altimetry data, e.g. Bamber (Bamber et al., 2001) and later improved by photoclinometry to fill the regions between orbits (Scambos and Haran, 2002). The elevation error of these DEMs is a few meters in the higher part (above 2000 m) of the ice sheet, but it can be as much as 50-100 meters in marginal regions. The relatively low resolution and accuracy poses a problem, especially for ice sheet modeling. Although accurate elevation data have been collected by airborne and spaceborne laser altimetry (airborne: Airborne Topographic Mapper (ATM) (1993-present), Laser Vegetation Imaging Sensor(LVIS) (2007,2009 and 2011); spaceborne: Ice, Cloud, and land Elevation Satellite (ICESat) (2003-2009)) and DEMs have been derived from stereo satellite imagery (e.g., SPOT (40 m), ASTER (15 m)), a high resolution, consistent DEM of GrIS is not yet available. This is due to various problems, such as different error sources in the data and different dates of data acquisition. In order to overcome these difficulties, we generated a multi-resolution DEM of GrIS, reflecting June 2008 conditions, by fusing a photoclinometry DEM, SPOT and ASTER DEMs as well as elevations from ICESat, ATM and LVIS laser altimetry. The new multi-resolution DEM has a resolution of 40 m x 40 m in the marginal ice sheet regions and 250 m elsewhere. The ice sheet margin is mapped from SPOT and Landsat imagery and SPOT DEMs are used to cover the complex topography of ice sheet marginal regions. The accuracy of SPOT DEMs is approximately ± 6 m except in the areas covered by clouds regions, where the SPOT elevations were replaced by ASTER DEMs. The ASTER DEMs were checked and improved by the DEM derived from aerial photography from the 1980s. A new photoclinometry DEM, derived from Advanced Very High Resolution Radiometer (AVHRR) and Moderate Resolution Imaging Spectroradiometer (MODIS) imagery

  19. Improving merge methods for grid-based digital elevation models

    NASA Astrophysics Data System (ADS)

    Leitão, J. P.; Prodanović, D.; Maksimović, Č.

    2016-03-01

    Digital Elevation Models (DEMs) are used to represent the terrain in applications such as, for example, overland flow modelling or viewshed analysis. DEMs generated from digitising contour lines or obtained by LiDAR or satellite data are now widely available. However, in some cases, the area of study is covered by more than one of the available elevation data sets. In these cases the relevant DEMs may need to be merged. The merged DEM must retain the most accurate elevation information available while generating consistent slopes and aspects. In this paper we present a thorough analysis of three conventional grid-based DEM merging methods that are available in commercial GIS software. These methods are evaluated for their applicability in merging DEMs and, based on evaluation results, a method for improving the merging of grid-based DEMs is proposed. DEMs generated by the proposed method, called MBlend, showed significant improvements when compared to DEMs produced by the three conventional methods in terms of elevation, slope and aspect accuracy, ensuring also smooth elevation transitions between the original DEMs. The results produced by the improved method are highly relevant different applications in terrain analysis, e.g., visibility, or spotting irregularities in landforms and for modelling terrain phenomena, such as overland flow.

  20. ICESat Lidar and Global Digital Elevation Models: Application to DESDynI

    NASA Technical Reports Server (NTRS)

    Carabajal, Claudia C.; Harding, David J.; Suchdeo, Vijay P.

    2010-01-01

    Geodetic control is extremely important in the production and quality control of topographic data sets, enabling elevation results to be referenced to an absolute vertical datum. Global topographic data with improved geodetic accuracy achieved using global Ground Control Point (GCP) databases enable more accurate characterization of land topography and its change related to solid Earth processes, natural hazards and climate change. The multiple-beam lidar instrument that will be part of the NASA Deformation, Ecosystem Structure and Dynamics of Ice (DESDynI) mission will provide a comprehensive, global data set that can be used for geodetic control purposes. Here we illustrate that potential using data acquired by NASA's Ice, Cloud and land Elevation Satellite (ICEsat) that has acquired single-beam, globally distributed laser altimeter profiles (+/-86deg) since February of 2003 [1, 2]. The profiles provide a consistently referenced elevation data set with unprecedented accuracy and quantified measurement errors that can be used to generate GCPs with sub-decimeter vertical accuracy and better than 10 m horizontal accuracy. Like the planned capability for DESDynI, ICESat records a waveform that is the elevation distribution of energy reflected within the laser footprint from vegetation, where present, and the ground where illuminated through gaps in any vegetation cover [3]. The waveform enables assessment of Digital Elevation Models (DEMs) with respect to the highest, centroid, and lowest elevations observed by ICESat and in some cases with respect to the ground identified beneath vegetation cover. Using the ICESat altimetry data we are developing a comprehensive database of consistent, global, geodetic ground control that will enhance the quality of a variety of regional to global DEMs. Here we illustrate the accuracy assessment of the Shuttle Radar Topography Mission (SRTM) DEM produced for Australia, documenting spatially varying elevation biases of several meters

  1. Registering Thematic Mapper imagery to digital elevation models

    NASA Technical Reports Server (NTRS)

    Frew, J.

    1984-01-01

    The problems encountered when attempting to register Landsat Thematic Mapper (TM) data to U.S. geological survey digital elevation models (DEMs) are examined. It is shown that TM and DEM data are not available in the same map projection, necessitating geometric transformation of one of the data type, that the TM data are not accurately located in their nominal projection, and that TM data have higher resolution than most DEM data, but oversampling the DEM data to TM resolution introduces systematic noise. Further work needed in this area is discussed.

  2. Applications of hydrologic information automatically extracted from digital elevation models

    USGS Publications Warehouse

    Jenson, S.K.

    1991-01-01

    Digital elevation models (DEMs) can be used to derive a wealth of information about the morphology of a land surface. Traditional raster analysis methods can be used to derive slope, aspect, and shaded relief information; recently-developed computer programs can be used to delineate depressions, overland flow paths, and watershed boundaries. These methods were used to delineate watershed boundaries for a geochemical stream sediment survey, to compare the results of extracting slope and flow paths from DEMs of varying resolutions, and to examine the geomorphology of a Martian DEM. -Author

  3. Void-Filled SRTM Digital Elevation Model of Afghanistan

    USGS Publications Warehouse

    Chirico, Peter G.; Barrios, Boris

    2005-01-01

    EXPLANATION The purpose of this data set is to provide a single consistent elevation model to be used for national scale mapping, GIS, remote sensing applications, and natural resource assessments for Afghanistan's reconstruction. For 11 days in February of 2000, the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency ian Space Agency (ASI) flew X-band and C-band radar interferometry onboard the Space Shuttle Endeavor. The mission covered the Earth between 60?N and 57?S and will provide interferometric digital elevation models (DEMs) of approximately 80% of the Earth's land mass when processing is complete. The radar-pointing angle was approximately 55? at scene center. Ascending and descending orbital passes generated multiple interferometric data scenes for nearly all areas. Up to eight passes of data were merged to form the final processed Shuttle Radar Topography Mission (SRTM) DEMs. The effect of merging scenes averages elevation values recorded in coincident scenes and reduces, but does not completely eliminate, the amount of area with layover and terrain shadow effects. The most significant form of data processing for the Afghanistan DEM was gap-filling areas where the SRTM data contained a data void. These void areas are as a result of radar shadow, layover, standing water, and other effects of terrain as well as technical radar interferometry phase unwrapping issues. To fill these gaps, topographic contours were digitized from 1:200,000 - scale Soviet General Staff Topographic Maps which date from the middle to late 1980's. Digital contours were gridded to form elevation models for void areas and subsequently were merged with the SRTM data through GIS and image processing techniques. The data contained in this publication includes SRTM DEM quadrangles projected and clipped in geographic coordinates for the entire country. An index of all available SRTM DEM quadrangles is displayed here: Index_Geo_DD.pdf. Also

  4. Analysis of accuracy of digital elevation models created from captured data by digital photogrammetry method

    NASA Astrophysics Data System (ADS)

    Hudec, P.

    2011-12-01

    A digital elevation model (DEM) is an important part of many geoinformatic applications. For the creation of DEM, spatial data collected by geodetic measurements in the field, photogrammetric processing of aerial survey photographs, laser scanning and secondary sources (analogue maps) are used. It is very important from a user's point of view to know the vertical accuracy of a DEM. The article describes the verification of the vertical accuracy of a DEM for the region of Medzibodrožie, which was created using digital photogrammetry for the purposes of water resources management and modeling and resolving flood cases based on geodetic measurements in the field.

  5. Geometric correction and digital elevation extraction using multiple MTI datasets

    USGS Publications Warehouse

    Mercier, Jeffrey A.; Schowengerdt, Robert A.; Storey, James C.; Smith, Jody L.

    2007-01-01

    Digital Elevation Models (DEMs) are traditionally acquired from a stereo pair of aerial photographs sequentially captured by an airborne metric camera. Standard DEM extraction techniques can be naturally extended to satellite imagery, but the particular characteristics of satellite imaging can cause difficulties. The spacecraft ephemeris with respect to the ground site during image collects is the most important factor in the elevation extraction process. When the angle of separation between the stereo images is small, the extraction process typically produces measurements with low accuracy, while a large angle of separation can cause an excessive number of erroneous points in the DEM from occlusion of ground areas. The use of three or more images registered to the same ground area can potentially reduce these problems and improve the accuracy of the extracted DEM. The pointing capability of some sensors, such as the Multispectral Thermal Imager (MTI), allows for multiple collects of the same area from different perspectives. This functionality of MTI makes it a good candidate for the implementation of a DEM extraction algorithm using multiple images for improved accuracy. Evaluation of this capability and development of algorithms to geometrically model the MTI sensor and extract DEMs from multi-look MTI imagery are described in this paper. An RMS elevation error of 6.3-meters is achieved using 11 ground test points, while the MTI band has a 5-meter ground sample distance.

  6. Online, On Demand Access to Coastal Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Long, J.; Bristol, S.; Long, D.; Thompson, S.

    2014-12-01

    Process-based numerical models for coastal waves, water levels, and sediment transport are initialized with digital elevation models (DEM) constructed by interpolating and merging bathymetric and topographic elevation data. These gridded surfaces must seamlessly span the land-water interface and may cover large regions where the individual raw data sources are collected at widely different spatial and temporal resolutions. In addition, the datasets are collected from different instrument platforms with varying accuracy and may or may not overlap in coverage. The lack of available tools and difficulties in constructing these DEMs lead scientists to 1) rely on previously merged, outdated, or over-smoothed DEMs; 2) discard more recent data that covers only a portion of the DEM domain; and 3) use inconsistent methodologies to generate DEMs. The objective of this work is to address the immediate need of integrating land and water-based elevation data sources and streamline the generation of a seamless data surface that spans the terrestrial-marine boundary. To achieve this, the U.S. Geological Survey (USGS) is developing a web processing service to format and initialize geoprocessing tasks designed to create coastal DEMs. The web processing service is maintained within the USGS ScienceBase data management system and has an associated user interface. Through the map-based interface, users define a geographic region that identifies the bounds of the desired DEM and a time period of interest. This initiates a query for elevation datasets within federal science agency data repositories. A geoprocessing service is then triggered to interpolate, merge, and smooth the data sources creating a DEM based on user-defined configuration parameters. Uncertainty and error estimates for the DEM are also returned by the geoprocessing service. Upon completion, the information management platform provides access to the final gridded data derivative and saves the configuration parameters

  7. How processing digital elevation models can affect simulated water budgets

    USGS Publications Warehouse

    Kuniansky, E.L.; Lowery, M.A.; Campbell, B.G.

    2009-01-01

    For regional models, the shallow water table surface is often used as a source/sink boundary condition, as model grid scale precludes simulation of the water table aquifer. This approach is appropriate when the water table surface is relatively stationary. Since water table surface maps are not readily available, the elevation of the water table used in model cells is estimated via a two-step process. First, a regression equation is developed using existing land and water table elevations from wells in the area. This equation is then used to predict the water table surface for each model cell using land surface elevation available from digital elevation models (DEM). Two methods of processing DEM for estimating the land surface for each cell are commonly used (value nearest the cell centroid or mean value in the cell). This article demonstrates how these two methods of DEM processing can affect the simulated water budget. For the example presented, approximately 20% more total flow through the aquifer system is simulated if the centroid value rather than the mean value is used. This is due to the one-third greater average ground water gradients associated with the centroid value than the mean value. The results will vary depending on the particular model area topography and cell size. The use of the mean DEM value in each model cell will result in a more conservative water budget and is more appropriate because the model cell water table value should be representative of the entire cell area, not the centroid of the model cell.

  8. Preparation of the Digital Elevation Model for Orthophoto CR Production

    NASA Astrophysics Data System (ADS)

    Švec, Z.; Pavelka, K.

    2016-06-01

    The Orthophoto CR is produced in co-operation with the Land Survey Office and the Military Geographical and Hydrometeorological Office. The product serves to ensure a defence of the state, integrated crisis management, civilian tasks in support of the state administration and the local self-government of the Czech Republic as well. It covers the whole area of the Republic and for ensuring its up-to-datedness is reproduced in the biennial period. As the project is countrywide, it keeps the project within the same parameters in urban and rural areas as well. Due to economic reasons it cańt be produced as a true ortophoto because it requires large side and forward overlaps of the aerial photographs and a preparation of the digital surface model instead of the digital terrain model. Use of DTM without some objects of DSM for orthogonalization purposes cause undesirable image deformations in the Orthophoto. There are a few data sets available for forming a suitable elevation model. The principal source should represent DTMs made from data acquired by the airborne laser scanning of the entire area of the Czech Republic that was carried out in the years 2009-2013, the DMR4G in the grid form and the DMR5G in TIN form respectively. It can be replenished by some vector objects (bridges, dams, etc.) taken from the geographic base data of the Czech Republic or obtained by new stereo plotting. It has to be taken into account that the option of applying DSM made from image correlation is also available. The article focuses on the possibilities of DTM supplement for ortogonalization. It looks back to the recent transition from grid to hybrid elevation models, problems that occurred, its solution and getting some practical remarks. Afterwards it assesses the current state and deals with the options for updating the model. Some accuracy analysis are included.

  9. Watershed boundaries and digital elevation model of Oklahoma derived from 1:100,000-scale digital topographic maps

    USGS Publications Warehouse

    Cederstrand, J.R.; Rea, A.H.

    1995-01-01

    This document provides a general description of the procedures used to develop the data sets included on this compact disc. This compact disc contains watershed boundaries for Oklahoma, a digital elevation model, and other data sets derived from the digital elevation model. The digital elevation model was produced using the ANUDEM software package, written by Michael Hutchinson and licensed from the Centre for Resource and Environmental Studies at The Australian National University. Elevation data (hypsography) and streams (hydrography) from digital versions of the U.S. Geological Survey 1:100,000-scale topographic maps were used by the ANUDEM package to produce a hydrologically conditioned digital elevation model with a 60-meter cell size. This digital elevation model is well suited for drainage-basin delineation using automated techniques. Additional data sets include flow-direction, flow-accumulation, and shaded-relief grids, all derived from the digital elevation model, and the hydrography data set used in producing the digital elevation model. The watershed boundaries derived from the digital elevation model have been edited to be consistent with contours and streams from the U.S. Geological Survey 1:100,000-scale topographic maps. The watershed data set includes boundaries for 11-digit Hydrologic Unit Codes (watersheds) within Oklahoma, and 8-digit Hydrologic Unit Codes (cataloging units) outside Oklahoma. Cataloging-unit boundaries based on 1:250,000-scale maps outside Oklahoma for the Arkansas, Red, and White River basins are included. The other data sets cover Oklahoma, and where available, portions of 1:100,000-scale quadrangles adjoining Oklahoma.

  10. Fast Ray Tracing of Lunar Digital Elevation Models

    NASA Technical Reports Server (NTRS)

    McClanahan, Timothy P.; Evans, L. G.; Starr, R. D.; Mitrofanov, I.

    2009-01-01

    Ray-tracing (RT) of Lunar Digital Elevation Models (DEM)'s is performed to virtually derive the degree of radiation incident to terrain as a function of time, orbital and ephemeris constraints [I- 4]. This process is an integral modeling process in lunar polar research and exploration due to the present paucity of terrain information at the poles and mission planning activities for the anticipated spring 2009 launch of the Lunar Reconnaissance Orbiter (LRO). As part of the Lunar Exploration Neutron Detector (LEND) and Lunar Crater Observation and Sensing Satellite (LCROSS) preparations RI methods are used to estimate the critical conditions presented by the combined effects of high latitude, terrain and the moons low obliquity [5-7]. These factors yield low incident solar illumination and subsequently extreme thermal, and radiation conditions. The presented research uses RT methods both for radiation transport modeling in space and regolith related research as well as to derive permanently shadowed regions (PSR)'s in high latitude topographic minima, e.g craters. These regions are of scientific and human exploration interest due to the near constant low temperatures in PSRs, inferred to be < 100 K. Hydrogen is thought to have accumulated in PSR's through the combined effects of periodic cometary bombardment and/or solar wind processes, and the extreme cold which minimizes hydrogen sublimation [8-9]. RT methods are also of use in surface position optimization for future illumination dependent on surface resources e.g. power and communications equipment.

  11. 3D Color Digital Elevation Map of AFM Sample

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This color image is a three dimensional (3D) view of a digital elevation map of a sample collected by NASA's Phoenix Mars Lander's Atomic Force Microscope (AFM).

    The image shows four round pits, only 5 microns in depth, that were micromachined into the silicon substrate, which is the background plane shown in red. This image has been processed to reflect the levelness of the substrate.

    A Martian particle only one micrometer, or one millionth of a meter, across is held in the upper left pit.

    The rounded particle shown at the highest magnification ever seen from another world is a particle of the dust that cloaks Mars. Such dust particles color the Martian sky pink, feed storms that regularly envelop the planet and produce Mars' distinctive red soil.

    The particle was part of a sample informally called 'Sorceress' delivered to the AFM on the 38th Martian day, or sol, of the mission (July 2, 2008). The AFM is part of Phoenix's microscopic station called MECA, or the Microscopy, Electrochemistry, and Conductivity Analyzer.

    The AFM was developed by a Swiss-led consortium, with Imperial College London producing the silicon substrate that holds sampled particles.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  12. Calibration of Mercury Laser Altimeter Data Using Digital Elevation Models Derived from Stereo Image Pairs

    NASA Astrophysics Data System (ADS)

    Bauer, R. S.; Barker, M. K.; Mazarico, E.; Neumann, G. A.

    2015-12-01

    Knowledge of Mercury's topography is crucial to understanding Mercury's complex geology and history, as well as its current rotation state. From onboard the MESSENGER spacecraft, the Mercury Laser Altimeter (MLA) made around 26 million measurements of Mercury's topography, with radial and horizontal accuracies of ~10 m and ~100 m, respectively. Prior to orbit insertion in 2011, MESSENGER conducted three gravity-assist flybys of Mercury. During the January and October 2008 flybys, MLA made its first altimetric measurements, but the radial and horizontal accuracies were respectively limited to ~100 and ~1000 meters due to uncertainties in the spacecraft and planetary ephemerides. To reduce these geolocation uncertainties, the MLA flyby data have been compared to images taken by the Mercury Dual Imaging System (MDIS), another instrument on MESSENGER. Stereo image pairs acquired by MDIS were selected from a database of over 500,000 image pairs located within 5 degrees of the equator. The selected stereo pairs have high surface resolutions (~200 m/pixel), large overlap areas (overlap ratio > 0.3), and well-matched illumination conditions. Using the NASA Ames Stereo Pipeline, digital elevation models (DEMs) were constructed from the image pairs that contained MLA flyby data points. We then ran an alignment program on these DEMs to match included MLA altimetry bounce points as closely as possible to the DEM surfaces. The resulting estimated track displacements were aggregated, and the general trends of these displacements can be used to perform a full-flyby orbit adjustment. Such an adjustment would enable more reliable determination of Mercury's surface elevation and MESSENGER's trajectory during the 2008 flybys. Accurate elevation measurements from these flybys are especially important because they passed over the southern hemisphere, where MLA coverage from the orbital mission is sparse. Calibration of these MLA data will improve our knowledge of Mercury's orientation

  13. Topogrid Derived 10 Meter Resolution Digital Elevation Model of Charleston, and Parts of Berkeley, Colleton, Dorchester and Georgetown Counties, South Carolina

    USGS Publications Warehouse

    Chirico, Peter G.

    2005-01-01

    EXPLANATION The purpose of developing a new 10m resolution digital elevation model (DEM) of the Charleston Region was to more accurately depict geologic structure, surfical geology, and landforms of the Charleston County Region. Previously, many areas northeast and southwest of Charleston were originally mapped with a 20 foot contour interval. As a result, large areas within the National Elevation Dataset (NED) depict flat terraced topography where there was a lack of higher resolution elevation data. To overcome these data voids, the new DEM is supplemented with additional elevation data and break-lines derived from aerial photography and topographic maps. The resultant DEM is stored as a raster grid at uniform 10m horizontal resolution. The elevation model contained in this publication was prodcued utilizing the ANUDEM algorthim. ANUDEM allows for the inclusion of contours, streams, rivers, lake and water body polygons as well as spot height data to control the development of the elevation model. A preliminary statistical analysis using over 788 vertical elevation check points, primarily located in the northeastern part of the study area, derived from USGS 7.5 Minute Topographic maps reveals that the final DEM, has a vertical accuracy of ?3.27 meters. A table listing the elevation comparison between the elevation check points and the final DEM is provided.

  14. Interpolation of phenological phases on a digital elevation model (DEM)

    NASA Astrophysics Data System (ADS)

    Schöngaßner, Thomas C.; Scheifinger, Helfried

    2010-05-01

    The main objective of the VegDyn project (a cooperation between Joanneum Research, Institute of Digital Image Processing, LFZ Raumberg-Gumpenstein and ZAMG) consists in quantifying and modelling the relationship between individual growth stages of grassland on the one hand and atmospheric parameters, remotely sensed data and phenological observations on the other. The model simulates the beginning and the end of the vegetation period and the growth stages of grassland with temperature as input variable. Thus it will be possible to explore changes of the timing of the vegetation period and the growth stages of grassland in possible future climate scenarios, which are calculated by climate models. In the context of the VegDyn project we developed methods for the spatial interpolation of phenological phases on a digital elevation model with a 250 m grid resolution in the complex terrain of the Alps. The final result is a series of maps of long term mean entry dates and maps of entry dates of individual years, which can for instance be related with the Net Difference Vegetation Index (NDVI) parameter maps from satellite observations. Apart from the yearly input via the conventional observational network based on voluntary observers and the input via the web interface, the Austrian phenological data base is still being supplemented by data from the paper archive. The elevation of the station network ranges from 100 to 1700 m. The station density can reach up to 100 or more stations per phase and season during 1951 - 2009. From more than 280 observed phases including phases from wild (woody and herbaceous) and agricultural plants those have been selected, which are related to cultivated grassland and which can be detected by remote sensing. In order to be selected for spatial interpolation the phase must satisfy a number of criteria: a minimum number of stations and, in order to have a meaningful long term mean entry date, a minimum number of observations per station

  15. An evaluation of onshore digital elevation models for tsunami inundation modelling

    NASA Astrophysics Data System (ADS)

    Griffin, J.; Latief, H.; Kongko, W.; Harig, S.; Horspool, N.; Hanung, R.; Rojali, A.; Maher, N.; Fountain, L.; Fuchs, A.; Hossen, J.; Upi, S.; Dewanto, S. E.; Cummins, P. R.

    2012-12-01

    Tsunami inundation models provide fundamental information about coastal areas that may be inundated in the event of a tsunami along with additional parameters such as flow depth and velocity. This can inform disaster management activities including evacuation planning, impact and risk assessment and coastal engineering. A fundamental input to tsunami inundation models is adigital elevation model (DEM). Onshore DEMs vary widely in resolution, accuracy, availability and cost. A proper assessment of how the accuracy and resolution of DEMs translates into uncertainties in modelled inundation is needed to ensure results are appropriately interpreted and used. This assessment can in turn informdata acquisition strategies depending on the purpose of the inundation model. For example, lower accuracy elevation data may give inundation results that are sufficiently accurate to plan a community's evacuation route but not sufficient to inform engineering of a vertical evacuation shelters. A sensitivity study is undertaken to assess the utility of different available onshore digital elevation models for tsunami inundation modelling. We compare airborne interferometric synthetic aperture radar (IFSAR), ASTER and SRTM against high resolution (<1 m horizontal resolution, < 0.15 m vertical accuracy) LiDAR or stereo-camera data in three Indonesian locations with different coastal morphologies (Padang, West Sumatra; Palu, Central Sulawesi; and Maumere, Flores), using three different computational codes (ANUGA, TUNAMI-N3 and TsunAWI). Tsunami inundation extents modelled with IFSAR are comparable with those modelled with the high resolution datasets and with historical tsunami run-up data. Large vertical errors (> 10 m) and poor resolution of the coastline in the ASTER and SRTM elevation models cause modelled inundation to be much less compared with models using better data and with observations. Therefore we recommend that ASTER and SRTM should not be used for modelling tsunami

  16. Quality Assessment for the First Part of the Tandem-X Global Digital Elevation Model

    NASA Astrophysics Data System (ADS)

    Brautigam, B.; Martone, M.; Rizzoli, P.; Gonzalez, C.; Wecklich, C.; Borla Tridon, D.; Bachmann, M.; Schulze, D.; Zink, M.

    2015-04-01

    TanDEM-X is an innovative synthetic aperture radar (SAR) mission with the main goal to generate a global and homogeneous digital elevation model (DEM) of the Earth's land masses. The final DEM product will reach a new dimension of detail with respect to resolution and quality. The absolute horizontal and vertical accuracy shall each be less than 10 m in a 90% confidence interval at a pixel spacing of 12 m. The relative vertical accuracy specification for the TanDEM-X mission foresees a 90% point-to-point error of 2 m (4 m) for areas with predominant terrain slopes smaller than 20% (greater than 20%) within a 1° longitude by 1° latitude cell. The global DEM is derived from interferometric SAR acquisitions performed by two radar satellites flying in close orbit formation. Interferometric performance parameters like the coherence between the two radar images have been monitored and evaluated throughout the mission. In a further step, over 500,000 single SAR scenes are interferometrically processed, calibrated, and mosaicked into a global DEM product which will be completely available in the second half of 2016. This paper presents an up-todate quality status of the single interferometric acquisitions as well as of 50% of the final DEM. The overall DEM quality of these first products promises accuracies well within the specification, especially in terms of absolute height accuracy.

  17. A new lunar digital elevation model from the Lunar Orbiter Laser Altimeter and SELENE Terrain Camera

    NASA Astrophysics Data System (ADS)

    Barker, M. K.; Mazarico, E.; Neumann, G. A.; Zuber, M. T.; Haruyama, J.; Smith, D. E.

    2016-07-01

    We present an improved lunar digital elevation model (DEM) covering latitudes within ±60°, at a horizontal resolution of 512 pixels per degree (∼60 m at the equator) and a typical vertical accuracy ∼3 to 4 m. This DEM is constructed from ∼ 4.5 ×109 geodetically-accurate topographic heights from the Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter, to which we co-registered 43,200 stereo-derived DEMs (each 1° × 1°) from the SELENE Terrain Camera (TC) (∼1010 pixels total). After co-registration, approximately 90% of the TC DEMs show root-mean-square vertical residuals with the LOLA data of <5 m compared to ∼ 50% prior to co-registration. We use the co-registered TC data to estimate and correct orbital and pointing geolocation errors from the LOLA altimetric profiles (typically amounting to <10 m horizontally and <1 m vertically). By combining both co-registered datasets, we obtain a near-global DEM with high geodetic accuracy, and without the need for surface interpolation. We evaluate the resulting LOLA + TC merged DEM (designated as "SLDEM2015") with particular attention to quantifying seams and crossover errors.

  18. 2010 bathymetric survey and digital elevation model of Corte Madera Bay, California

    USGS Publications Warehouse

    Foxgrover, Amy C.; Finlayson, David P.; Jaffe, Bruce E.; Takekawa, John Y.; Thorne, Karen M.; Spragens, Kyle A.

    2011-01-01

    A high-resolution bathymetric survey of Corte Madera Bay, California, was collected in early 2010 in support of a collaborative research project initiated by the San Francisco Bay Conservation and Development Commission and funded by the U.S. Environmental Protection Agency. The primary objective of the Innovative Wetland Adaptation in the Lower Corte Madera Creek Watershed Project is to develop shoreline adaptation strategies to future sea-level rise based upon sound science. Fundamental to this research was the development of an of an up-to-date, high-resolution digital elevation model (DEM) extending from the subtidal environment through the surrounding intertidal marsh. We provide bathymetric data collected by the U.S. Geological Survey and have merged the bathymetry with a 1-m resolution aerial lidar data set that was collected by the National Oceanic and Atmospheric Administration during the same time period to create a seamless, high-resolution DEM of Corte Madera Bay and the surrounding topography. The bathymetric and DEM surfaces are provided at both 1 m and 10 m resolutions formatted as both X, Y, Z text files and ESRI Arc ASCII files, which are accompanied by Federal Geographic Data Committee compliant metadata.

  19. Accuracy assessment of photogrammetric digital elevation models generated for the Schultz Fire burn area

    NASA Astrophysics Data System (ADS)

    Muise, Danna K.

    This paper evaluates the accuracy of two digital photogrammetric software programs (ERDAS Imagine LPS and PCI Geomatica OrthoEngine) with respect to high-resolution terrain modeling in a complex topographic setting affected by fire and flooding. The site investigated is the 2010 Schultz Fire burn area, situated on the eastern edge of the San Francisco Peaks approximately 10 km northeast of Flagstaff, Arizona. Here, the fire coupled with monsoon rains typical of northern Arizona drastically altered the terrain of the steep mountainous slopes and residential areas below the burn area. To quantify these changes, high resolution (1 m and 3 m) digital elevation models (DEMs) were generated of the burn area using color stereoscopic aerial photographs taken at a scale of approximately 1:12000. Using a combination of pre-marked and post-marked ground control points (GCPs), I first used ERDAS Imagine LPS to generate a 3 m DEM covering 8365 ha of the affected area. This data was then compared to a reference DEM (USGS 10 m) to evaluate the accuracy of the resultant DEM. Findings were then divided into blunders (errors) and bias (slight differences) and further analyzed to determine if different factors (elevation, slope, aspect and burn severity) affected the accuracy of the DEM. Results indicated that both blunders and bias increased with an increase in slope, elevation and burn severity. It was also found that southern facing slopes contained the highest amount of bias while northern facing slopes contained the highest proportion of blunders. Further investigations compared a 1 m DEM generated using ERDAS Imagine LPS with a 1 m DEM generated using PCI Geomatica OrthoEngine for a specific region of the burn area. This area was limited to the overlap of two images due to OrthoEngine requiring at least three GCPs to be located in the overlap of the imagery. Results indicated that although LPS produced a less accurate DEM, it was much more flexible than OrthoEngine. It was also

  20. High Resolution Digital Elevation Models of Pristine Explosion Craters

    NASA Technical Reports Server (NTRS)

    Farr, T. G.; Krabill, W.; Garvin, J. B.

    2004-01-01

    In order to effectively capture a realistic terrain applicable to studies of cratering processes and landing hazards on Mars, we have obtained high resolution digital elevation models of several pristine explosion craters at the Nevada Test Site. We used the Airborne Terrain Mapper (ATM), operated by NASA's Wallops Flight Facility to obtain DEMs with 1 m spacing and 10 cm vertical errors of 4 main craters and many other craters and collapse pits. The main craters that were mapped are Sedan, Scooter, Schooner, and Danny Boy. The 370 m diameter Sedan crater, located on Yucca Flat, is the largest and freshest explosion crater on Earth that was formed under conditions similar to hypervelocity impact cratering. As such, it is effectively pristine, having been formed in 1962 as a result of a controlled detonation of a 100 kiloton thermonuclear device, buried at the appropriate equivalent depth of burst required to make a simple crater. Sedan was formed in alluvium of mixed lithology and subsequently studied using a variety of field-based methods. Nearby secondary craters were also formed at the time and were also mapped by ATM. Adjacent to Sedan and also in alluvium is Scooter, about 90 m in diameter and formed by a high-explosive event. Schooner (240 m) and Danny Boy (80 m) craters were also important targets for ATM as they were excavated in hard basalt and therefore have much rougher ejecta. This will allow study of ejecta patterns in hard rock as well as engineering tests of crater and rock avoidance and rover trafficability. In addition to the high resolution DEMs, crater geometric characteristics, RMS roughness maps, and other higher-order derived data products will be generated using these data. These will provide constraints for models of landing hazards on Mars and for rover trafficability. Other planned studies will include ejecta size-frequency distribution at the resolution of the DEM and at finer resolution through air photography and field measurements

  1. A quality control system for digital elevation data

    NASA Astrophysics Data System (ADS)

    Knudsen, Thomas; Kokkendorf, Simon; Flatman, Andrew; Nielsen, Thorbjørn; Rosenkranz, Brigitte; Keller, Kristian

    2015-04-01

    In connection with the introduction of a new version of the Danish national coverage Digital Elevation Model (DK-DEM), the Danish Geodata Agency has developed a comprehensive quality control (QC) and metadata production (MP) system for LiDAR point cloud data. The architecture of the system reflects its origin in a national mapping organization where raw data deliveries are typically outsourced to external suppliers. It also reflects a design decision of aiming at, whenever conceivable, doing full spatial coverage tests, rather than scattered sample checks. Hence, the QC procedure is split in two phases: A reception phase and an acceptance phase. The primary aim of the reception phase is to do a quick assessment of things that can typically go wrong, and which are relatively simple to check: Data coverage, data density, strip adjustment. If a data delivery passes the reception phase, the QC continues with the acceptance phase, which checks five different aspects of the point cloud data: Vertical accuracy Vertical precision Horizontal accuracy Horizontal precision Point classification correctness The vertical descriptors are comparatively simple to measure: The vertical accuracy is checked by direct comparison with previously surveyed patches. The vertical precision is derived from the observed variance on well defined flat surface patches. These patches are automatically derived from the road centerlines registered in FOT, the official Danish map data base. The horizontal descriptors are less straightforward to measure, since potential reference material for direct comparison is typically expected to be less accurate than the LiDAR data. The solution selected is to compare photogrammetrically derived roof centerlines from FOT with LiDAR derived roof centerlines. These are constructed by taking the 3D Hough transform of a point cloud patch defined by the photogrammetrical roof polygon. The LiDAR derived roof centerline is then the intersection line of the two primary

  2. An algorithm for treating flat areas and depressions in digital elevation models using linear interpolation

    EPA Science Inventory

    Digital elevation model (DEM) data are essential to hydrological applications and have been widely used to calculate a variety of useful topographic characteristics, e.g., slope, flow direction, flow accumulation area, stream channel network, topographic index, and others. Excep...

  3. LROC NAC Digital Elevation Model of Gruithuisen Gamma

    NASA Astrophysics Data System (ADS)

    Braden, S.; Tran, T. N.; Robinson, M. S.

    2009-12-01

    The Gruithuisen Domes have long been of interest as examples of non-mare volcanism [1]. Their form suggests extrusion of silica-rich magmas, possibly dating to 3.7-3.85 Ga (around the same time as the Iridum event), and were subsequently embayed by mare [2,3]. Non-mare volcanism is indicated by spectral features known as “red spots” which have (a) high albedo, (b) strong absorption in the ultraviolet, and (c) a wide range of morphologies [4,5,6]. The composition of red spot domes is still unknown, but dacitic or rhyolitic KREEP-rich compositions [5] and mature, low iron and low titanium agglutinate-rich soils [7] have been suggested. The existence of non-mare volcanism has major implications for the thermal history and crustal evolution of the Moon. A new digital elevation model (DEM), derived from stereo image pairs acquired with the Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC), allows detailed investigation of the morphology and thus origin of Mons Gruithuisen Gamma (36.6° N, 40.5° W). The 10 meter per pixel DEM shows relief of ~1500 meters from the summit plateau of Gruithuisen Gamma to the nearby mare surface. This measurement is close to previous estimates of over 1200 meters from Apollo era images [4]. Previous estimates also suggested that the overall slopes ranged from 15-30° [7]. Radial profiles (n=25) across the eastern two-thirds of the Gruithuisen Gamma DEM show that the overall slope is 17-18° along the north- and northeastern-facing slopes, 14° along the eastern-most edge, 12° on the side facing the contact of the dome material and highlands material, and 11° on the directly southern-facing slope. The north-south diameter of the dome is ~24 km and the east-west diameter is ~18 km. The textures on each slope are remarkably similar and distinct from the highlands and crater slopes, with irregular furrows oriented down-slope. The same furrowed texture is not seen on mare domes, which are generally much smoother, flatter

  4. Levee crest elevation profiles derived from airborne lidar-based high resolution digital elevation models in south Louisiana

    USGS Publications Warehouse

    Palaseanu-Lovejoy, Monica; Thatcher, Cindy A.; Barras, John A.

    2014-01-01

    This study explores the feasibility of using airborne lidar surveys to derive high-resolution digital elevation models (DEMs) and develop an automated procedure to extract levee longitudinal elevation profiles for both federal levees in Atchafalaya Basin and local levees in Lafourche Parish. Generally, the use of traditional manual surveying methods to map levees is a costly and time consuming process that typically produces cross-levee profiles every few hundred meters, at best. The purpose of our paper is to describe and test methods for extracting levee crest elevations in an efficient, comprehensive manner using high resolution lidar generated DEMs. In addition, the vertical uncertainty in the elevation data and its effect on the resultant estimate of levee crest heights is addressed in an assessment of whether the federal levees in our study meet the USACE minimum height design criteria.

  5. Comparison of 7.5-minute and 1-degree digital elevation models

    NASA Technical Reports Server (NTRS)

    Isaacson, Dennis L.; Ripple, William J.

    1995-01-01

    We compared two digital elevation models (DEM's) for the Echo Mountain SE quadrangle in the Cascade Mountains of Oregon. Comparisons were made between 7.5-minute (1:24,000-scale) and 1-degree (1:250,000-scale) images using the variables of elevation, slope aspect, and slope gradient. Both visual and statistical differences are presented.

  6. Tectonic development of the Northwest Bonaparte Basin, Australia by using Digital Elevation Model (DEM)

    NASA Astrophysics Data System (ADS)

    Wahid, Ali; Salim, Ahmed Mohamed Ahmed; Ragab Gaafar, Gamal; Yusoff, AP Wan Ismail Wan

    2016-02-01

    The Bonaparte Basin consist of majorly offshore part is situated at Australia's NW continental margin, covers an area of approx. 270,000km2. Bonaparte Basin having a number of sub-basins and platform areas of Paleozoic and Mesozoic is structurally complex. This research established the geologic and geomorphologic studies using Digital Elevation Model (DEM) as a substitute approach in morphostructural analysis to unravel the geological complexities. Although DEMs have been in practice since 1990s, they still have not become common tool for mapping studies. The research work comprised of regional structural analysis with the help of integrated elevation data, satellite imageries, available open topograhic images and internal geological maps with interpreted seismic. The structural maps of the study area have been geo-referenced which further overlaid onto SRTM data and satellite images for combined interpretation which facilitate to attain Digital Elevation Model of the study area. The methodology adopts is to evaluate and redefine development of geodynamic processes involved in formation of Bonaparte Basin. The main objectives is to establish the geological histories by using digital elevation model. The research work will be useful to incorporate different tectonic events occurred at different Geological times in a digital elevation model. The integrated tectonic analysis of different digital data sets benefitted substantially from combining them into a common digital database. Whereas, the visualization software facilitates the overlay and combined interpretation of different data sets which is helpful to reveal hidden information not obvious or accessible otherwise for regional analysis.

  7. Calculation and Error Analysis of a Digital Elevation Model of Hofsjokull, Iceland from SAR Interferometry

    NASA Technical Reports Server (NTRS)

    Barton, Jonathan S.; Hall, Dorothy K.; Sigurosson, Oddur; Williams, Richard S., Jr.; Smith, Laurence C.; Garvin, James B.

    1999-01-01

    Two ascending European Space Agency (ESA) Earth Resources Satellites (ERS)-1/-2 tandem-mode, synthetic aperture radar (SAR) pairs are used to calculate the surface elevation of Hofsjokull, an ice cap in central Iceland. The motion component of the interferometric phase is calculated using the 30 arc-second resolution USGS GTOPO30 global digital elevation product and one of the ERS tandem pairs. The topography is then derived by subtracting the motion component from the other tandem pair. In order to assess the accuracy of the resultant digital elevation model (DEM), a geodetic airborne laser-altimetry swath is compared with the elevations derived from the interferometry. The DEM is also compared with elevations derived from a digitized topographic map of the ice cap from the University of Iceland Science Institute. Results show that low temporal correlation is a significant problem for the application of interferometry to small, low-elevation ice caps, even over a one-day repeat interval, and especially at the higher elevations. Results also show that an uncompensated error in the phase, ramping from northwest to southeast, present after tying the DEM to ground-control points, has resulted in a systematic error across the DEM.

  8. The AEI 10 m prototype interferometer

    NASA Astrophysics Data System (ADS)

    Goßler, S.; Bertolini, A.; Born, M.; Chen, Y.; Dahl, K.; Gering, D.; Gräf, C.; Heinzel, G.; Hild, S.; Kawazoe, F.; Kranz, O.; Kühn, G.; Lück, H.; Mossavi, K.; Schnabel, R.; Somiya, K.; Strain, K. A.; Taylor, J. R.; Wanner, A.; Westphal, T.; Willke, B.; Danzmann, K.

    2010-04-01

    A 10 m prototype interferometer facility is currently being set up at the AEI in Hannover, Germany. The prototype interferometer will be housed inside a 100 m3 ultra-high vacuum envelope. Seismically isolated optical tables inside the vacuum system will be interferometrically interconnected via a suspension platform interferometer. Advanced isolation techniques will be used, such as inverted pendulums and geometrical anti-spring filters in combination with multiple-cascaded pendulum suspensions, containing an all-silica monolithic last stage. The light source is a 35 W Nd:YAG laser, geometrically filtered by passing it through a photonic crystal fibre and a rigid pre-modecleaner cavity. Laser frequency stabilisation will be achieved with the aid of a high finesse suspended reference cavity in conjunction with a molecular iodine reference. Coating thermal noise will be reduced by the use of Khalili cavities as compound end mirrors. Data acquisition and control of the experiments is based on the AdvLIGO digital control and data system. The aim of the project is to test advanced techniques for GEO 600 as well as to conduct experiments in macroscopic quantum mechanics. Reaching standard quantum-limit sensitivity for an interferometer with 100 g mirrors and subsequently breaching this limit, features most prominently among these experiments. In this paper we present the layout and current status of the AEI 10 m Prototype Interferometer project.

  9. Elevating student potential: creating digital video to teach neurotransmission.

    PubMed

    Jarvinen, Michael K; Jarvinen, Lamis Z

    2012-01-01

    Students today have unprecedented access to technology, the Internet, and social media. Their nearly ubiquitous use of these platforms is well documented. Given that today's students may be primed to learn using a different medium, incorporating various technological elements into the classroom in a manner compatible with traditional approaches to teaching becomes a challenge. We recently designed and implemented a strategy that capitalized on this knowledge. Students in their first neuroscience course were required to create a 3-5 minute digital video using video-making freeware available on any Mac or PC. They used images, text, animation, as well as downloaded music to describe the fundamental process of neurotransmission as it applies to a topic of their choice. In comparison to students taught using other more traditional approaches to demonstrate the process of neurotransmission, we observed that students who took part in the video-making project exhibited better understanding of the neurological process at multiple levels, as defined by Bloom's revised taxonomy. This was true even of students who had no aspirations of pursuing a Neuroscience career, thus suggesting that there was an overall increased level of student engagement regardless of personal career interests. The utility of our approach was validated by both direct and indirect assessments. Importantly, this particular strategy to teaching difficult concepts offers a high degree of flexibility allowing it to potentially be incorporated into any upper-level Neuroscience course. PMID:23493934

  10. Object representations at multiple scales from digital elevation models

    PubMed Central

    Drăguţ, Lucian; Eisank, Clemens

    2011-01-01

    In the last decade landform classification and mapping has developed as one of the most active areas of geomorphometry. However, translation from continuous models of elevation and its derivatives (slope, aspect, and curvatures) to landform divisions (landforms and landform elements) is filtered by two important concepts: scale and object ontology. Although acknowledged as being important, these two issues have received surprisingly little attention. This contribution provides an overview and prospects of object representation from DEMs as a function of scale. Relationships between object delineation and classification or regionalization are explored, in the context of differences between general and specific geomorphometry. A review of scales issues in geomorphometry—ranging from scale effects to scale optimization techniques—is followed by an analysis of pros and cons of using cells and objects in DEM analysis. Prospects for coupling multi-scale analysis and object delineation are then discussed. Within this context, we propose discrete geomorphometry as a possible approach between general and specific geomorphometry. Discrete geomorphometry would apply to and describe land-surface divisions defined solely by the criteria of homogeneity in respect to a given land-surface parameter or a combination of several parameters. Homogeneity, in its turn, should always be relative to scale. PMID:21760655

  11. Object representations at multiple scales from digital elevation models.

    PubMed

    Drăguţ, Lucian; Eisank, Clemens

    2011-06-15

    In the last decade landform classification and mapping has developed as one of the most active areas of geomorphometry. However, translation from continuous models of elevation and its derivatives (slope, aspect, and curvatures) to landform divisions (landforms and landform elements) is filtered by two important concepts: scale and object ontology. Although acknowledged as being important, these two issues have received surprisingly little attention.This contribution provides an overview and prospects of object representation from DEMs as a function of scale. Relationships between object delineation and classification or regionalization are explored, in the context of differences between general and specific geomorphometry. A review of scales issues in geomorphometry-ranging from scale effects to scale optimization techniques-is followed by an analysis of pros and cons of using cells and objects in DEM analysis. Prospects for coupling multi-scale analysis and object delineation are then discussed. Within this context, we propose discrete geomorphometry as a possible approach between general and specific geomorphometry. Discrete geomorphometry would apply to and describe land-surface divisions defined solely by the criteria of homogeneity in respect to a given land-surface parameter or a combination of several parameters. Homogeneity, in its turn, should always be relative to scale. PMID:21760655

  12. Digital elevation model (DEM) of Cascadia, latitude 39N-53N, longitude 116W-133W

    USGS Publications Warehouse

    Haugerud, Ralph A.

    1999-01-01

    This report contains a 250-meter digital elevation model (DEM) for Cascadia (latitude 39N - 53N, longitude 116W - 133W), a region that encompasses the Cascade volcanic arc, the Cascadia subduction zone, and the Juan de Fuca Ridge system. The DEM is distributed as file cascdem.tar.gz (39 MB; 78MB uncompressed).

  13. The effects of digital elevation model resolution on the calculation and predictions of topographic wetness indices.

    SciTech Connect

    Drover, Damion, Ryan

    2011-12-01

    One of the largest exports in the Southeast U.S. is forest products. Interest in biofuels using forest biomass has increased recently, leading to more research into better forest management BMPs. The USDA Forest Service, along with the Oak Ridge National Laboratory, University of Georgia and Oregon State University are researching the impacts of intensive forest management for biofuels on water quality and quantity at the Savannah River Site in South Carolina. Surface runoff of saturated areas, transporting excess nutrients and contaminants, is a potential water quality issue under investigation. Detailed maps of variable source areas and soil characteristics would therefore be helpful prior to treatment. The availability of remotely sensed and computed digital elevation models (DEMs) and spatial analysis tools make it easy to calculate terrain attributes. These terrain attributes can be used in models to predict saturated areas or other attributes in the landscape. With laser altimetry, an area can be flown to produce very high resolution data, and the resulting data can be resampled into any resolution of DEM desired. Additionally, there exist many maps that are in various resolutions of DEM, such as those acquired from the U.S. Geological Survey. Problems arise when using maps derived from different resolution DEMs. For example, saturated areas can be under or overestimated depending on the resolution used. The purpose of this study was to examine the effects of DEM resolution on the calculation of topographic wetness indices used to predict variable source areas of saturation, and to find the best resolutions to produce prediction maps of soil attributes like nitrogen, carbon, bulk density and soil texture for low-relief, humid-temperate forested hillslopes. Topographic wetness indices were calculated based on the derived terrain attributes, slope and specific catchment area, from five different DEM resolutions. The DEMs were resampled from LiDAR, which is a

  14. Digital Elevation Models Aid the Analysis of Double Layered Ejecta (DLE) Impact Craters on Mars

    NASA Astrophysics Data System (ADS)

    Mouginis-Mark, P. J.; Boyce, J. M.; Garbeil, H.

    2014-12-01

    Considerable debate has recently taken place concerning the origin of the inner and outer ejecta layers of double layered ejecta (DLE) craters on Mars. For craters in the diameter range ~10 to ~25 km, the inner ejecta layer of DLE craters displays characteristic grooves extending from the rim crest, and has led investigators to propose three hypotheses for their formation: (1) deposition of the primary ejecta and subsequent surface scouring by either atmospheric vortices or a base surge; (2) emplacement through a landslide of the near-rim crest ejecta; and (3) instabilities (similar to Gortler vortices) generated by high flow-rate, and high granular temperatures. Critical to resolving between these models is the topographic expression of both the ejecta layer and the groove geometry. To address this problem, we have made several digital elevation models (DEMs) from CTX and HiRISE stereo pairs using the Ames Stereo Pipeline at scales of 24 m/pixel and 1 m/pixel, respectively. These DEMs allow several key observations to be made that bear directly upon the origin of the grooves associated with DLE craters: (1) Grooves formed on the sloping ejecta layer surfaces right up to the preserved crater rim; (2) There is clear evidence that grooves traverse the topographic boundary between the inner and outer ejecta layers; and (3) There are at least two different sets of radial grooves, with smaller grooves imprinted upon the larger grooves. There are "deep-wide" grooves that have a width of ~200 m and a depth of ~10 m, and there are "shallow-narrow" grooves with a width of <50 m and depth <5 m. These two scales of grooves are not consistent with their formation analogous to a landslide. Two different sets of grooves would imply that, simultaneously, two different depths to the flow would have to exist if the grooves were formed by shear within the flow, something that is not physically possible. All three observations can only be consistent with a model of groove formation

  15. Digital Elevation Models of Greenland based on combined radar and laser altimetry as well as high-resolution stereoscopic imagery

    NASA Astrophysics Data System (ADS)

    Levinsen, J. F.; Smith, B. E.; Sandberg Sorensen, L.; Khvorostovsky, K.; Simonsen, S. B.; Forsberg, R.

    2015-12-01

    A number of Digital Elevation Models (DEMs) of Greenland exist, each of which are applicable for different purposes. This study presents two such DEMs: One developed by merging contemporary radar and laser altimeter data, and one derived from high-resolution stereoscopic imagery. All products are made freely available. The former DEM covers the entire Greenland. It is specific to the year 2010, providing it with an advantage over previous models suffering from either a reduced spatial/ temporal data coverage or errors from surface elevation changes (SEC) occurring during data acquisition. Radar data are acquired with Envisat and CryoSat-2, and laser data with the Ice, Cloud, and land Elevation Satellite, the Land, Vegetation, and Ice Sensor, and the Airborne Topographic Mapper. Correcting radar data for errors from slope effects and surface penetration of the echoes, and merging these with laser data, yields a DEM capable of resolving both surface depressions as well as topographic features at higher altitudes. The spatial resolution is 2 x 2 km, making the DEM ideal for application in surface mass balance studies, SEC detection from radar altimetry, or for correcting such data for slope-induced errors. The other DEM is developed in a pilot study building the expertise to map all ice-free parts of Greenland. The work combines WorldView-2 and -3 as well as GeoEye1 imagery from 2014 and 2015 over the Disko, Narsaq, Tassilaq, and Zackenberg regions. The novelty of the work is the determination of the product specifications after elaborate discussions with interested parties from government institutions, the tourist industry, etc. Thus, a 10 m DEM, 1.5 m orthophotos, and vector maps are produced. This opens to the possibility of using orthophotos with up-to-date contour lines or for deriving updated coastlines to aid, e.g., emergency management. This allows for a product development directly in line with the needs of parties with specific interests in Greenland.

  16. Digital elevation data as an aid to land use and land cover classification

    USGS Publications Warehouse

    Colvocoresses, Alden P.

    1981-01-01

    In relatively well mapped areas such as the United States and Europe, digital data can be developed from topographic maps or from the stereo aerial photographic movie. For poorer mapped areas (which involved most of the world's land areas), a satellite designed to obtain stereo data offers the best hope for a digital elevation database. Such a satellite, known as Mapsat, has been defined by the U.S. Geological Survey. Utilizing modern solid state technology, there is no reason why such stereo data cannot be acquired simultaneously with the multispectral response, thus simplifying the overall problem of land use and land cover classification.

  17. A seamless, high-resolution digital elevation model (DEM) of the north-central California coast

    USGS Publications Warehouse

    Foxgrover, Amy C.; Barnard, Patrick L.

    2012-01-01

    A seamless, 2-meter resolution digital elevation model (DEM) of the north-central California coast has been created from the most recent high-resolution bathymetric and topographic datasets available. The DEM extends approximately 150 kilometers along the California coastline, from Half Moon Bay north to Bodega Head. Coverage extends inland to an elevation of +20 meters and offshore to at least the 3 nautical mile limit of state waters. This report describes the procedures of DEM construction, details the input data sources, and provides the DEM for download in both ESRI Arc ASCII and GeoTIFF file formats with accompanying metadata.

  18. Validating Flood Mapping Products Using a Digital Elevation Model Comparison Technique

    NASA Astrophysics Data System (ADS)

    Fayne, J.

    2014-12-01

    This preliminary study assessed the validity of a pixel analysis elevation comparison technique and determined necessary steps for improvement. The pixel analysis sought to assess the probability of a flood occurring in a particular area by comparing the spatial extent of flood mapping products to the local elevation. The method was developed to determine if the physical relationship between elevation and floods as shown in satellite images is accurately represented in a flood mapping product. The data incorporated in this study are raster digital elevation model (DEM) tiles, a scene from Landsat 5 during a flood period, and a scene from the NASA DEVELOP Flood Disasters Team Flood Product. Pixels representing flooded areas were compared to the elevation height pixels using horizontal transect lines to create pixel value profiles across a 727 km transect of Vietnam and Cambodia. The elevation model comparison validates the Flood Product by depicting water presence in alignment with areas of low elevation. Initial findings indicate that the technique can be used to improve the assessment of flood mapping products in transects less than 10 km. Future research will focus on streamlining the pixel analysis process to yield comprehensive results for larger areas.

  19. Analyzing remote sensing geobotanical trends in Quetico Provincial Park, Ontario, Canada, using digital elevation data

    NASA Technical Reports Server (NTRS)

    Warner, Timothy A.; Campagna, David J.; Levandowski, Don W.; Cetin, Haluk; Evans, Carla S.

    1991-01-01

    A 10 x 13-km area in Quetico Provincial Park, Canada has been studied using a digital elevation model to separate different drainage classes and to examine the influence of site factors and lithology on vegetation. Landsat Thematic Mapper data have been classified into six forest classes of varying deciduous-coniferous cover through nPDF, a procedure based on probability density functions. It is shown that forests growing on mafic lithologies are enriched in deciduous species, compared to those growing on granites. Of the forest classes found on mafics, the highest coniferous component was on north facing slopes, and the highest deciduous component on south facing slopes. Granites showed no substantial variation between site classes. The digital elevation derived site data is considered to be an important tool in geobotanical investigations.

  20. 1:100,000-scale topographic contours derived from digital elevation models, San Francisco Bay region, California: a digital database

    USGS Publications Warehouse

    Wright, Heather M.; Wentworth, Carl M.

    2001-01-01

    This report presents a consistent set of 1:100,000-scale vector topographic contours for all eleven 30x60-minute quadrangles in the San Francisco Bay region for use in visualizing the topography and preparing maps of the region. The contours were prepared by contouring an areally continuous 30-m altitude grid (National Elevation Dataset, Jan., 1999), and differ from USGS hypsographic DLG's (available for only part of the region). The report consists of 26 numbered parts, which represent text, spatial data, and 1:100,000-scale map graphics. Most of the files are provided in two or three different digital formats. All files are available for download here.

  1. An evaluation of onshore digital elevation models for modelling tsunami inundation zones

    NASA Astrophysics Data System (ADS)

    Griffin, Jonathan; Latief, Hamzah; Kongko, Widjo; Harig, Sven; Horspool, Nick; Hanung, Raditya; Rojali, Aditia; Maher, Nicola; Fuchs, Annika; Hossen, Jakir; Upi, Supriyati; Edi, Dewanto; Rakowsky, Natalja; Cummins, Phil

    2015-06-01

    A sensitivity study is undertaken to assess the utility of different onshore digital elevation models (DEM) for simulating the extent of tsunami inundation using case studies from two locations in Indonesia. We compare airborne IFSAR, ASTER and SRTM against high resolution LiDAR and stereo-camera data in locations with different coastal morphologies. Tsunami inundation extents modelled with airborne IFSAR DEMs are comparable with those modelled with the higher resolution datasets and are also consistent with historical run-up data, where available. Large vertical errors and poor resolution of the coastline in the ASTER and SRTM elevation datasets cause the modelled inundation extent to be much less compared with the other datasets and observations. Therefore ASTER and SRTM should not be used to underpin tsunami inundation models. a model mesh resolution of 25 m was sufficient for estimating the inundated area when using elevation data with high vertical accuracy in the case studies presented here. Differences in modelled inundation between digital terrain models (DTM) and digital surface models (DSM) for LiDAR and IFSAR are greater than differences between the two data types. Models using DTM may overestimate inundation while those using DSM may underestimate inundation when a constant Manning’s roughness value is used. We recommend using DTM for modelling tsunami inundation extent with further work needed to resolve the scale at which surface roughness should be parameterised.

  2. Topogrid Derived 10 Meter Resolution Digital Elevation Model of the Shenandoah National Park and Surrounding Region, Virginia

    USGS Publications Warehouse

    Chirico, Peter G.; Tanner, Seth D.

    2004-01-01

    Explanation The purpose of developing a new 10m resolution DEM of the Shenandoah National Park Region was to more accurately depict geologic structure, surfical geology, and landforms of the Shenandoah National Park Region in preparation for automated landform classification. Previously, only a 30m resolution DEM was available through the National Elevation Dataset (NED). During production of the Shenandoah10m DEM of the Park the Geography Discipline of the USGS completed a revised 10m DEM to be included into the NED. However, different methodologies were used to produce the two similar DEMs. The ANUDEM algorithm was used to develop the Shenadoah DEM data. This algorithm allows for the inclusion of contours, streams, rivers, lake and water body polygons as well as spot height data to control the elevation model. A statistical analysis using over 800 National Geodetic Survey (NGS) first and second order vertical control points reveals that the Shenandoah10m DEM, produced as a part of the Appalachian Blue Ridge Landscape project, has a vertical accuracy of ?4.87 meters. The metadata for the 10m NED data reports a vertical accuracy of ?7m. A table listing the NGS control points, the elevation comparison, and the RMSE for the Shenandoah10m DEM is provided. The process of automated terrain classification involves developing statistical signatures from the DEM for each type of surficial deposit and landform type. The signature will be a measure of several characteristics derived from the elevation data including slope, aspect, planform curvature, and profile curvature. The quality of the DEM is of critical importance when extracting terrain signatures. The highest possible horizontal and vertical accuracy is required. The more accurate Shenandoah 10m DEM can now be analyzed and integrated with the geologic observations to yield statistical correlations between the two in the development of landform and surface geology mapping projects.

  3. Comparative Analysis of Global Digital Elevation Models and Ultra-Prominent Mountain Peaks

    NASA Astrophysics Data System (ADS)

    Grohmann, Carlos H.

    2016-06-01

    Global Digital Elevation Models (GDEMs) are datasets of vital importance for regional-scale analysis in areas such as geomorphology, [paleo]climatology, oceanography and biodiversity. In this work I present a comparative assessment of the datasets ETOPO1 (1' resolution), GTOPO30, GLOBE, SRTM30 PLUS, GMTED2010 and ACE2 (30") against the altitude of the world's ultra prominent peaks. GDEMs' elevations show an expected tendency of underestimating the peak's altitude, but differences reach 3,500 m. None of the GDEMs captures the full range of elevation on Earth and they do not represent well the altitude of the most prominent peaks. Some of these problems could be addressed with the release of NASADEM, but the smoothing effect caused by moving-window resampling can only be tackled by using new techniques, such as scale-adaptative kernels and curvature-based terrain generalisation.

  4. Assessment of Required Accuracy of Digital Elevation Data for Hydrologic Modeling

    NASA Technical Reports Server (NTRS)

    Kenward, T.; Lettenmaier, D. P.

    1997-01-01

    The effect of vertical accuracy of Digital Elevation Models (DEMs) on hydrologic models is evaluated by comparing three DEMs and resulting hydrologic model predictions applied to a 7.2 sq km USDA - ARS watershed at Mahantango Creek, PA. The high resolution (5 m) DEM was resempled to a 30 m resolution using method that constrained the spatial structure of the elevations to be comparable with the USGS and SIR-C DEMs. This resulting 30 m DEM was used as the reference product for subsequent comparisons. Spatial fields of directly derived quantities, such as elevation differences, slope, and contributing area, were compared to the reference product, as were hydrologic model output fields derived using each of the three DEMs at the common 30 m spatial resolution.

  5. Revealing topographic lineaments through IHS enhancement of DEM data. [Digital Elevation Model

    NASA Technical Reports Server (NTRS)

    Murdock, Gary

    1990-01-01

    Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

  6. A geomorphology based approach for digital elevation model fusion - case study in Danang City, Vietnam

    NASA Astrophysics Data System (ADS)

    Tran, T. A.; Raghavan, V.; Masumoto, S.; Vinayaraj, P.; Yonezawa, G.

    2014-04-01

    Global Digital Elevation Model (DEM) is considered as vital spatial information and finds wide use in several applications. Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global DEM (GDEM) and Shuttle Radar Topographic Mission (SRTM) DEM offer almost global coverage and provide elevation data for geospatial analysis. However, GDEM and SRTM still contain some height errors that affect the quality of elevation data significantly. This study aims to examine methods to improve the resolution as well as accuracy of available free DEMs by data fusion technique and evaluating the results with high quality reference DEM. The DEM fusion method is based on the accuracy assessment of each global DEM and geomorphological characteristics of the study area. Land cover units were also considered to correct the elevation of GDEM and SRTM with respect to the bare earth surface. Weighted averaging method was used to fuse the input DEMs based on landform classification map. According to the landform types, the different weights were used for GDEM and SRTM. Finally, a denoising algorithm (Sun et al., 2007) was applied to filter the output fused DEM. This fused DEM shows excellent correlation to the reference DEM having correlation coefficient R2 = 0.9986 and the accuracy was also improved from Root Mean Square Error (RMSE) 14.9 m in GDEM and 14.8 m in SRTM into 11.6 m in fused DEM.

  7. Initial Everglades Depth Estimation Network (EDEN) Digital Elevation Model Research and Development

    USGS Publications Warehouse

    Jones, John W.; Price, Susan D.

    2007-01-01

    Introduction The Everglades Depth Estimation Network (EDEN) offers a consistent and documented dataset that can be used to guide large-scale field operations, to integrate hydrologic and ecological responses, and to support biological and ecological assessments that measure ecosystem responses to the Comprehensive Everglades Restoration Plan (Telis, 2006). To produce historic and near-real time maps of water depths, the EDEN requires a system-wide digital elevation model (DEM) of the ground surface. Accurate Everglades wetland ground surface elevation data were non-existent before the U.S. Geological Survey (USGS) undertook the collection of highly accurate surface elevations at the regional scale. These form the foundation for EDEN DEM development. This development process is iterative as additional high accuracy elevation data (HAED) are collected, water surfacing algorithms improve, and additional ground-based ancillary data become available. Models are tested using withheld HAED and independently measured water depth data, and by using DEM data in EDEN adaptive management applications. Here the collection of HAED is briefly described before the approach to DEM development and the current EDEN DEM are detailed. Finally future research directions for continued model development, testing, and refinement are provided.

  8. Statistical correction of lidar-derived digital elevation models with multispectral airborne imagery in tidal marshes

    USGS Publications Warehouse

    Buffington, Kevin J.; Dugger, Bruce D.; Thorne, Karen M.; Takekawa, John

    2016-01-01

    Airborne light detection and ranging (lidar) is a valuable tool for collecting large amounts of elevation data across large areas; however, the limited ability to penetrate dense vegetation with lidar hinders its usefulness for measuring tidal marsh platforms. Methods to correct lidar elevation data are available, but a reliable method that requires limited field work and maintains spatial resolution is lacking. We present a novel method, the Lidar Elevation Adjustment with NDVI (LEAN), to correct lidar digital elevation models (DEMs) with vegetation indices from readily available multispectral airborne imagery (NAIP) and RTK-GPS surveys. Using 17 study sites along the Pacific coast of the U.S., we achieved an average root mean squared error (RMSE) of 0.072 m, with a 40–75% improvement in accuracy from the lidar bare earth DEM. Results from our method compared favorably with results from three other methods (minimum-bin gridding, mean error correction, and vegetation correction factors), and a power analysis applying our extensive RTK-GPS dataset showed that on average 118 points were necessary to calibrate a site-specific correction model for tidal marshes along the Pacific coast. By using available imagery and with minimal field surveys, we showed that lidar-derived DEMs can be adjusted for greater accuracy while maintaining high (1 m) resolution.

  9. State of Texas - Highlighting Low-Lying Areas Derived from USGS Digital Elevation Data

    USGS Publications Warehouse

    Kosovich, John J.

    2008-01-01

    In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts a color shaded relief representation of Texas and a grayscale relief of the surrounding areas. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED data were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. The NED source data for this map consists of a mixture of 30-meter- and 10-meter-resolution DEMs. State and county boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. The NED data were downloaded in 2002. Shaded relief over Mexico was obtained from the USGS National Atlas.

  10. Where’s the Ground Surface? – Elevation Bias in LIDAR-derived Digital Elevation Models Due to Dense Vegetation in Oregon Tidal Marshes

    EPA Science Inventory

    Light Detection and Ranging (LIDAR) is a powerful resource for coastal and wetland managers and its use is increasing. Vegetation density and other land cover characteristics influence the accuracy of LIDAR-derived ground surface digital elevation models; however the degree to wh...

  11. Enhancing a RADARSAT/ICESat Digital Elevation Model of West Antarctica Using MODIS Imagery

    NASA Astrophysics Data System (ADS)

    Haran, T. M.; Scambos, T. A.

    2007-12-01

    An image enhancement approach is used to develop a new digital elevation map of West Antarctica, combining multiple MODIS images and both radar altimetry and ICESat laser altimetry Digital Elevation Model (DEM) data. The method combines the wide image coverage of MODIS, and its high radiometric sensitivity (which equates to high sunward slope sensitivity), with the high precision and accuracy of ICESat and combined ICESat and radar altimetry DEMs. We calibrate brightness-to-slope relationships for several MODIS images of the central West Antarctic using smoothed DEMs derived from both sources. Using the calibrations, we then created, first, a slope map of the ice sheet surface from the image data (regressing slope information from many images), and then integrated this absolute slope map to yield complete DEMs for the region. ICESat (as of September 2007) has acquired a series of eleven near-repeat tracks over the Antarctic during the period September 2003 to April 2007, covering the continent to 86 deg S. ICESat data are acquired as a series of spot elevations, averaging a ~60m diameter surface region every ~172m. However, ICESat track paths have spacings wide enough (2 km at 85 deg; 20 - 50 km at 75 deg) that some surface ice dynamical features (e.g. flowlines, undulations, ice rises) are missed by the track data used to construct the ICESat DEM. Radar altimetry can provide some of the missing data north of 81.5 deg, but only to a maximum resolution of about 5 km. A set of cloud-cleared MODIS band 1 data from both the Aqua and Terra platforms acquired during the 2003-2004 austral summer, used in generating the Mosaic of Antarctica, MOA, surface morphology image map, were used for the image enhancement. Past analyses of the slope-brightness relationship for MODIS have shown ice surface slope precisions of +/- 0.00015. ICESat spot elevations have nominal precisions of ~5 cm under ideal conditions, although thin-cloud effects and mislocation errors can magnify these

  12. Perspectives on open access high resolution digital elevation models to produce global flood hazard layers

    NASA Astrophysics Data System (ADS)

    Sampson, Christopher; Smith, Andrew; Bates, Paul; Neal, Jeffrey; Trigg, Mark

    2015-12-01

    Global flood hazard models have recently become a reality thanks to the release of open access global digital elevation models, the development of simplified and highly efficient flow algorithms, and the steady increase in computational power. In this commentary we argue that although the availability of open access global terrain data has been critical in enabling the development of such models, the relatively poor resolution and precision of these data now limit significantly our ability to estimate flood inundation and risk for the majority of the planet's surface. The difficulty of deriving an accurate 'bare-earth' terrain model due to the interaction of vegetation and urban structures with the satellite-based remote sensors means that global terrain data are often poorest in the areas where people, property (and thus vulnerability) are most concentrated. Furthermore, the current generation of open access global terrain models are over a decade old and many large floodplains, particularly those in developing countries, have undergone significant change in this time. There is therefore a pressing need for a new generation of high resolution and high vertical precision open access global digital elevation models to allow significantly improved global flood hazard models to be developed.

  13. Construction of a 3-arcsecond digital elevation model for the Gulf of Maine

    USGS Publications Warehouse

    Twomey, Erin R.; Signell, Richard P.

    2013-01-01

    A system-wide description of the seafloor topography is a basic requirement for most coastal oceanographic studies. The necessary detail of the topography obviously varies with application, but for many uses, a nominal resolution of roughly 100 m is sufficient. Creating a digital bathymetric grid with this level of resolution can be a complex procedure due to a multiplicity of data sources, data coverages, datums and interpolation procedures. This report documents the procedures used to construct a 3-arcsecond (approximately 90-meter grid cell size) digital elevation model for the Gulf of Maine (71°30' to 63° W, 39°30' to 46° N). We obtained elevation and bathymetric data from a variety of American and Canadian sources, converted all data to the North American Datum of 1983 for horizontal coordinates and the North American Vertical Datum of 1988 for vertical coordinates, used a combination of automatic and manual techniques for quality control, and interpolated gaps using a surface-fitting routine.

  14. Delineating small karst watersheds based on digital elevation model and eco-hydrogeological principles

    NASA Astrophysics Data System (ADS)

    Jie Luo, Guang; Jie Wang, Shi; Bai, Xiao Yong; Liu, Xiu Ming; Cheng, An Yun

    2016-03-01

    Dominated by specific eco-hydrogeological backgrounds, a small watershed delineated by using the traditional method is always inauthentic in karst regions because it cannot accurately reflect the eco-hydrological process of the dual structure of the surface and subsurface. This study proposes a new method for the delineation of small watersheds based on digital elevation models (DEMs) and eco-hydrogeological principles in karst regions. This method is applied to one section of the tributary area (Sancha River) of the Yangtze River in China. By comparing the quantity, shape, superimposition, and characteristics of the internal hydrological process of a small watershed extracted by using the digital elevation model with that extracted by using the proposed method of this study, we conclude that the small karst watersheds extracted by the new method accurately reflect the hydrological process of the river basin. Furthermore, we propose that the minimum unit of the river basin in karst regions should be the watershed, whose exit is the corrosion and corrasion baselevel and a further division of watershed may cause a significant inconsistency with the true eco-hydrological process.

  15. Quantification of soil losses from tourist trails - use of Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Tomczyk, Aleksandra

    2010-05-01

    Tourism impacts in protected mountain areas are one of the main concerns for land managers. Impact to environment is most visible at locations of highly concentrated activities like tourist trails, campsites etc. The main indicators of the tourist trail degradation are: vegetation loss (trampling of vegetation cover), change of vegetation type and composition, widening of the trails, muddiness and soil erosion. The last one is especially significant, since it can cause serious transformation of the land surface. Such undesirable changes cannot be repaired without high-cost management activities, and, in some cases they can made the trails difficult and unsafe to use. Scientific understanding of soil erosion related to human impact can be useful for more effective management of the natural protected areas. The aim of this study was to use of digital elevation models (DEMs) to precisely quantify of soil losses from tourist trails. In the study precise elevation data were gathered in several test fields of 4 by 5 m spatial dimension. Measurements were taken in 13 test fields, located in two protected natural areas in south Poland: Gorce National Park and Popradzki Landscape Park. The measuring places were located on trails characterized by different slope, type of vegetation and type of use. Each test field was established by four special marks, firmly dug into the ground. Elevation data were measured with the electronic total station. Irregular elevation points were surveying with essential elements of surrounding terrain surface being included. Moreover, surveys in fixed profile lines were done. For each test field a set of 30 measurements in control points has been collected and these data provide the base for verification of digital elevation models. Average density of the surveying was 70 points per square meter (1000 - 1500 elevation points per each test fields). Surveys in each test field were carried out in August and September of 2008, June 2009 and August

  16. State of Louisiana - Highlighting Low-Lying Areas Derived from USGS Digital Elevation Data

    USGS Publications Warehouse

    Kosovich, John J.

    2008-01-01

    In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts a color shaded relief representation highlighting the State of Louisiana and depicts the surrounding areas using muted elevation colors. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED data are a mixture of data and were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Approximately one-half of the area shown on this map has DEM source data at a 30-meter resolution, with the remaining half consisting of mostly 10-meter contour-derived DEM data and some small areas of higher-resolution LIght Detection And Ranging (LIDAR) data along parts of the coastline. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and parish boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. The NED data were downloaded in 2007.

  17. Assessing the quality for hydrological applications of digital elevation models derived from contours

    NASA Astrophysics Data System (ADS)

    Wise, Stephen

    2000-07-01

    Digital elevation models (DEMs) are becoming increasingly important tools in hydrological research and in water resources management. The quality of DEMs, however, normally is reported simply as the root mean square error of elevation, a statistic that fails to capture the numerous sources of error in DEMs or to predict their effect on the result of using the DEM. This paper presents a review of other approaches to assessing DEM quality, and argues that a full assessment of DEM quality must focus on the accuracy and reliability of the final product of the DEM analysis. A number of DEMs for the Slapton Ley catchments in Devon derived from digitized contour data are compared in an initial assessment of their sustainability for use in hydrological work. Two are available for purchase from data suppliers, and five more were created using a variety of interpolation techniques in widely available geographical information system software. The different interpretation methods produce DEMs with different artefacts, although analyses of the distribution of elevation values, and visual techniques, suggested that none of these were of a particularly pronounced nature. The results of using the DEMs to derive drainage networks and catchment areas showed that at the broad scale there was a high level of agreement between the DEMs. There were, however, important differences of detail. For example, some DEMs predicted drainage lines that occasionally crossed the original contours. The results of calculating the TOPMODEL topographic index showed far more variation, because the index is calculated for each pixel in the area, rather than being an aggregate result derived from numerous pixels. The main conclusion was that care should always be taken to assess the quality of a DEM before attempting to use it, and that results should always be checked to ensure that they appear to be reasonable.

  18. Open-Source Digital Elevation Model (DEMs) Evaluation with GPS and LiDAR Data

    NASA Astrophysics Data System (ADS)

    Khalid, N. F.; Din, A. H. M.; Omar, K. M.; Khanan, M. F. A.; Omar, A. H.; Hamid, A. I. A.; Pa'suya, M. F.

    2016-09-01

    Advanced Spaceborne Thermal Emission and Reflection Radiometer-Global Digital Elevation Model (ASTER GDEM), Shuttle Radar Topography Mission (SRTM), and Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010) are freely available Digital Elevation Model (DEM) datasets for environmental modeling and studies. The quality of spatial resolution and vertical accuracy of the DEM data source has a great influence particularly on the accuracy specifically for inundation mapping. Most of the coastal inundation risk studies used the publicly available DEM to estimated the coastal inundation and associated damaged especially to human population based on the increment of sea level. In this study, the comparison between ground truth data from Global Positioning System (GPS) observation and DEM is done to evaluate the accuracy of each DEM. The vertical accuracy of SRTM shows better result against ASTER and GMTED10 with an RMSE of 6.054 m. On top of the accuracy, the correlation of DEM is identified with the high determination of coefficient of 0.912 for SRTM. For coastal zone area, DEMs based on airborne light detection and ranging (LiDAR) dataset was used as ground truth data relating to terrain height. In this case, the LiDAR DEM is compared against the new SRTM DEM after applying the scale factor. From the findings, the accuracy of the new DEM model from SRTM can be improved by applying scale factor. The result clearly shows that the value of RMSE exhibit slightly different when it reached 0.503 m. Hence, this new model is the most suitable and meets the accuracy requirement for coastal inundation risk assessment using open source data. The suitability of these datasets for further analysis on coastal management studies is vital to assess the potentially vulnerable areas caused by coastal inundation.

  19. Application of Low-Cost Digital Elevation Models to Detect Change in Forest Carbon Sequestration Projects

    SciTech Connect

    Kenneth Glenn MacDicken

    2007-07-31

    This two-year study evaluated advanced multispectral digital imagery applications for assessment of forest carbon stock change. A series of bench and field studies in North Carolina and Ohio tested aerial assessments of forest change between two time periods using two software packages (ERDAS and TERREST) for Digital Elevation Model (DEM) creation, automated classification software (eCognition) for canopy segmentation and a multiple ranging laser designed to improve quality of elevation data. Results of the DEM software comparison showed that while TERREST has the potential to produce much higher resolution DEM than ERDAS, it is unable to resolve crucial canopy features adequately. Lab tests demonstrated that additional laser data improves image registration and Z-axis DEM quality. Data collected in the field revealed difficult challenges in correctly modeling the location of laser strike and subsequently determining elevations in both software packages. Automated software segmentation of tree canopies provided stem diameter and biomass carbon estimates that were within 3% of comparable ground based estimates in the Ohio site and produced similar biomass estimates for a limited number of plots in the Duke forest. Tree height change between time periods and canopy segmentation from multispectral imagery allowed calculation of forest carbon stock change at costs that are comparable to those for ground-based methods. This work demonstrates the potential of lower cost imagery systems enhanced with laser data to collect high quality imagery and paired laser data for forestry and environmental applications. Additional research on automated canopy segmentation and multi-temporal image registration is needed to refine these methods for commercial use.

  20. A Seamless, High-Resolution, Coastal Digital Elevation Model (DEM) for Southern California

    USGS Publications Warehouse

    Barnard, Patrick L.; Hoover, Daniel

    2010-01-01

    A seamless, 3-meter digital elevation model (DEM) was constructed for the entire Southern California coastal zone, extending 473 km from Point Conception to the Mexican border. The goal was to integrate the most recent, high-resolution datasets available (for example, Light Detection and Ranging (Lidar) topography, multibeam and single beam sonar bathymetry, and Interferometric Synthetic Aperture Radar (IfSAR) topography) into a continuous surface from at least the 20-m isobath to the 20-m elevation contour. This dataset was produced to provide critical boundary conditions (bathymetry and topography) for a modeling effort designed to predict the impacts of severe winter storms on the Southern California coast (Barnard and others, 2009). The hazards model, run in real-time or with prescribed scenarios, incorporates atmospheric information (wind and pressure fields) with a suite of state-of-the-art physical process models (tide, surge, and wave) to enable detailed prediction of water levels, run-up, wave heights, and currents. Research-grade predictions of coastal flooding, inundation, erosion, and cliff failure are also included. The DEM was constructed to define the general shape of nearshore, beach and cliff surfaces as accurately as possible, with less emphasis on the detailed variations in elevation inland of the coast and on bathymetry inside harbors. As a result this DEM should not be used for navigation purposes.

  1. Spatial disaggregation of satellite-derived irradiance using a high-resolution digital elevation model

    SciTech Connect

    Ruiz-Arias, Jose A.; Tovar-Pescador, Joaquin; Cebecauer, Tomas; Suri, Marcel

    2010-09-15

    Downscaling of the Meteosat-derived solar radiation ({proportional_to}5 km grid resolution) is based on decomposing the global irradiance and correcting the systematic bias of its components using the elevation and horizon shadowing that are derived from the SRTM-3 digital elevation model (3 arc sec resolution). The procedure first applies the elevation correction based on the difference between coarse and high spatial resolution. Global irradiance is split into direct, diffuse circumsolar and diffuse isotropic components using statistical models, and then corrections due to terrain shading and sky-view fraction are applied. The effect of reflected irradiance is analysed only in the theoretical section. The method was applied in the eastern Andalusia, Spain, and the validation was carried out for 22 days on April, July and December 2006 comparing 15-min estimates of the satellite-derived solar irradiance and observations from nine ground stations. Overall, the corrections of the satellite estimates in the studied region strongly reduced the mean bias of the estimates for clear and cloudy days from roughly 2.3% to 0.4%. (author)

  2. Digital Elevation Model from Non-Metric Camera in Uas Compared with LIDAR Technology

    NASA Astrophysics Data System (ADS)

    Dayamit, O. M.; Pedro, M. F.; Ernesto, R. R.; Fernando, B. L.

    2015-08-01

    Digital Elevation Model (DEM) data as a representation of surface topography is highly demanded for use in spatial analysis and modelling. Aimed to that issue many methods of acquisition data and process it are developed, from traditional surveying until modern technology like LIDAR. On the other hands, in a past four year the development of Unamend Aerial System (UAS) aimed to Geomatic bring us the possibility to acquire data about surface by non-metric digital camera on board in a short time with good quality for some analysis. Data collectors have attracted tremendous attention on UAS due to possibility of the determination of volume changes over time, monitoring of the breakwaters, hydrological modelling including flood simulation, drainage networks, among others whose support in DEM for proper analysis. The DEM quality is considered as a combination of DEM accuracy and DEM suitability so; this paper is aimed to analyse the quality of the DEM from non-metric digital camera on UAS compared with a DEM from LIDAR corresponding to same geographic space covering 4 km2 in Artemisa province, Cuba. This area is in a frame of urban planning whose need to know the topographic characteristics in order to analyse hydrology behaviour and decide the best place for make roads, building and so on. Base on LIDAR technology is still more accurate method, it offer us a pattern for test DEM from non-metric digital camera on UAS, whose are much more flexible and bring a solution for many applications whose needs DEM of detail.

  3. Preliminary development of digital elevation and relief models for ICESat-2 onboard processing

    NASA Astrophysics Data System (ADS)

    Leigh, H. W.; Magruder, L. A.; Carabajal, C. C.

    2012-12-01

    ATLAS (Advanced Topographic Laser Altimeter System) is a photon-counting laser ranging instrument that will fly onboard NASA's ICESat-2 mission to collect global altimetry data for the primary purpose of determining volumetric changes in the Polar Regions. While photon-counting systems provide the advantage of using small, low power lasers, they are typically much more susceptible to noise and require the use of sophisticated algorithms both onboard and in ground based processing to ensure capture of valid data and production of accurate data products. An onboard receiver algorithm is being developed for ATLAS to ensure that valid data is returned while adhering to the 577 Gb/day limit on data telemetry. The onboard receiver algorithm makes use of multiple onboard databases, two of which are the DEM (Digital Elevation Model) and the DRM (Digital Relief Map). The DEM provides start and stop times for software-induced range gating on the ATLAS detectors, and is a nested, three-tiered grid to account for a 6 km overall constraint on the allowable limit for ranging acquisition. The DRM contains the maximum values of relief seen across 140m- and 700m-long flight path segments, which are used in statistically determining the presence of a valid surface return and in deciding which bands to telemeter. Both onboard databases are to be primarily constructed from existing digital elevation models and must provide global coverage referenced to latitude and longitude. Production of the grids is complicated by the lack of global data products of sufficient resolution and accuracy such that preliminary analysis is required for DEM selection and usage in addition to the determination of how to intelligently merge differing data sets. This initial investigation is also focused on determining the impact of the selected DEM quality on the ICESat-2 onboard algorithms as well as the precipitated error induced on the DRM. These results are required in order to determine the expected

  4. Side-specific effect of yolk testosterone elevation on second-to-fourth digit ratio in a wild passerine.

    PubMed

    Nagy, Gergely; Blázi, György; Hegyi, Gergely; Török, János

    2016-02-01

    Second-to-fourth digit ratio is a widely investigated sexually dimorphic morphological trait in human studies and could reliably indicate the prenatal steroid environment. Conducting manipulative experiments to test this hypothesis comes up against ethical limits in humans. However, oviparous tetrapods may be excellent models to experimentally investigate the effects of prenatal steroids on offspring second-to-fourth digit ratio. In this field study, we injected collared flycatcher (Ficedula albicollis) eggs with physiological doses of testosterone. Fledglings from eggs with elevated yolk testosterone, regardless of their sex, had longer second digits on their left feet than controls, while the fourth digit did not differ between groups. Therefore, second-to-fourth digit ratio was higher in the testosterone-injected group, but only on the left foot. This is the first study which shows experimentally that early testosterone exposure can affect second-to-fourth digit ratio in a wild population of a passerine bird. PMID:26732381

  5. Side-specific effect of yolk testosterone elevation on second-to-fourth digit ratio in a wild passerine

    NASA Astrophysics Data System (ADS)

    Nagy, Gergely; Blázi, György; Hegyi, Gergely; Török, János

    2016-02-01

    Second-to-fourth digit ratio is a widely investigated sexually dimorphic morphological trait in human studies and could reliably indicate the prenatal steroid environment. Conducting manipulative experiments to test this hypothesis comes up against ethical limits in humans. However, oviparous tetrapods may be excellent models to experimentally investigate the effects of prenatal steroids on offspring second-to-fourth digit ratio. In this field study, we injected collared flycatcher ( Ficedula albicollis) eggs with physiological doses of testosterone. Fledglings from eggs with elevated yolk testosterone, regardless of their sex, had longer second digits on their left feet than controls, while the fourth digit did not differ between groups. Therefore, second-to-fourth digit ratio was higher in the testosterone-injected group, but only on the left foot. This is the first study which shows experimentally that early testosterone exposure can affect second-to-fourth digit ratio in a wild population of a passerine bird.

  6. Side-specific effect of yolk testosterone elevation on second-to-fourth digit ratio in a wild passerine.

    PubMed

    Nagy, Gergely; Blázi, György; Hegyi, Gergely; Török, János

    2016-02-01

    Second-to-fourth digit ratio is a widely investigated sexually dimorphic morphological trait in human studies and could reliably indicate the prenatal steroid environment. Conducting manipulative experiments to test this hypothesis comes up against ethical limits in humans. However, oviparous tetrapods may be excellent models to experimentally investigate the effects of prenatal steroids on offspring second-to-fourth digit ratio. In this field study, we injected collared flycatcher (Ficedula albicollis) eggs with physiological doses of testosterone. Fledglings from eggs with elevated yolk testosterone, regardless of their sex, had longer second digits on their left feet than controls, while the fourth digit did not differ between groups. Therefore, second-to-fourth digit ratio was higher in the testosterone-injected group, but only on the left foot. This is the first study which shows experimentally that early testosterone exposure can affect second-to-fourth digit ratio in a wild population of a passerine bird.

  7. A geomorphology-based approach for digital elevation model fusion - case study in Danang city, Vietnam

    NASA Astrophysics Data System (ADS)

    Tran, T. A.; Raghavan, V.; Masumoto, S.; Vinayaraj, P.; Yonezawa, G.

    2014-07-01

    Global digital elevation models (DEM) are considered a source of vital spatial information and find wide use in several applications. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global DEM (GDEM) and Shuttle Radar Topographic Mission (SRTM) DEM offer almost global coverage and provide elevation data for geospatial analysis. However, GDEM and SRTM still contain some height errors that affect the quality of elevation data significantly. This study aims to examine methods to improve the resolution as well as accuracy of available free DEMs by data fusion techniques and evaluating the results with a high-quality reference DEM. The DEM fusion method is based on the accuracy assessment of each global DEM and geomorphological characteristics of the study area. Land cover units were also considered to correct the elevation of GDEM and SRTM with respect to the bare-earth surface. The weighted averaging method was used to fuse the input DEMs based on a landform classification map. According to the landform types, the different weights were used for GDEM and SRTM. Finally, a denoising algorithm (Sun et al., 2007) was applied to filter the output-fused DEM. This fused DEM shows excellent correlation to the reference DEM, having a correlation coefficient R2 = 0.9986, and the accuracy was also improved from a root mean square error (RMSE) of 14.9 m in GDEM and 14.8 m in SRTM to 11.6 m in the fused DEM. The results of terrain-related parameters extracted from this fused DEM such as slope, curvature, terrain roughness index and normal vector of topographic surface are also very comparable to reference data.

  8. Gulf of Mexico Region - Highlighting Low-Lying Areas Derived from USGS Digital Elevation Data

    USGS Publications Warehouse

    Kosovich, John J.

    2008-01-01

    In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts a color shaded relief representation of the area surrounding the Gulf of Mexico. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED data were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s data) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Approximately one-half of the area shown on this map has DEM source data at a 30-meter resolution, with the remaining half consisting of 10-meter contour-derived DEM data or higher-resolution LIDAR data. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and county boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. The NED data were downloaded in 2005.

  9. An algorithm for treating flat areas and depressions in digital elevation models using linear interpolation

    NASA Astrophysics Data System (ADS)

    Pan, Feifei; Stieglitz, Marc; McKane, Robert B.

    2012-06-01

    Digital elevation model (DEM) data are essential to hydrological applications and have been widely used to calculate a variety of useful topographic characteristics, e.g., slope, flow direction, flow accumulation area, stream channel network, topographic index, and others. Except for slope, none of the other topographic characteristics can be calculated until the flow direction at each pixel within a DEM is determined. However, flow direction cannot be accurately calculated until depressions and flat areas within a DEM have been rectified. This is a routine problem in hydrologic modeling, because virtually all DEMs contain flat and sink pixels, both real and artifactual, that if left untreated will prevent accurate simulation of hydrologic flow paths. Although a number of algorithms are available for rectifying flat and sink pixels in DEM data, treatment of flat areas and depressions and calculation of flow direction remain problematic for reasons of complexity and uncertainty. A new algorithm that effectively rectifies flat and sink pixels was developed and tested. The approach is to use linear interpolation between low elevation grid cells on the edge of each flat area or depression defined as outlets and higher elevation grid cells on the opposite side defined as inflow pixels. The implementation requires an iterative solution to accommodate the irregular geometry of flat areas or depressions and exceptions that arise. Linear interpolation across flat areas or depressions provides a natural way to scale elevation adjustments based on the vertical scale of the surrounding topography, thereby avoiding the addition or subtraction of arbitrary small numbers that we regard as a disadvantage in some prior techniques. Tests for two virtual terrains and one real terrain show that our algorithm effectively rectifies flat areas and depressions, even in low-relief terrain, and produces realistic patterns of flow accumulation and extracted channel networks.

  10. Back to the Future: Have Remotely Sensed Digital Elevation Models Improved Hydrological Parameter Extraction?

    NASA Astrophysics Data System (ADS)

    Jarihani, B.

    2015-12-01

    Digital Elevation Models (DEMs) that accurately replicate both landscape form and processes are critical to support modeling of environmental processes. Pre-processing analysis of DEMs and extracting characteristics of the watershed (e.g., stream networks, catchment delineation, surface and subsurface flow paths) is essential for hydrological and geomorphic analysis and sediment transport. This study investigates the status of the current remotely-sensed DEMs in providing advanced morphometric information of drainage basins particularly in data sparse regions. Here we assess the accuracy of three available DEMs: (i) hydrologically corrected "H-DEM" of Geoscience Australia derived from the Shuttle Radar Topography Mission (SRTM) data; (ii) the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) version2 1-arc-second (~30 m) data; and (iii) the 9-arc-second national GEODATA DEM-9S ver3 from Geoscience Australia and the Australian National University. We used ESRI's geospatial data model, Arc Hydro and HEC-GeoHMS, designed for building hydrologic information systems to synthesize geospatial and temporal water resources data that support hydrologic modeling and analysis. A coastal catchment in northeast Australia was selected as the study site where very high resolution LiDAR data are available for parts of the area as reference data to assess the accuracy of other lower resolution datasets. This study provides morphometric information for drainage basins as part of the broad research on sediment flux from coastal basins to Great Barrier Reef, Australia. After applying geo-referencing and elevation corrections, stream and sub basins were delineated for each DEM. Then physical characteristics for streams (i.e., length, upstream and downstream elevation, and slope) and sub-basins (i.e., longest flow lengths, area, relief and slopes) were extracted and compared with reference datasets from LiDAR. Results showed that

  11. Robust Mosaicking of Stereo Digital Elevation Models from the Ames Stereo Pipeline

    NASA Technical Reports Server (NTRS)

    Kim, Tae Min; Moratto, Zachary M.; Nefian, Ara Victor

    2010-01-01

    Robust estimation method is proposed to combine multiple observations and create consistent, accurate, dense Digital Elevation Models (DEMs) from lunar orbital imagery. The NASA Ames Intelligent Robotics Group (IRG) aims to produce higher-quality terrain reconstructions of the Moon from Apollo Metric Camera (AMC) data than is currently possible. In particular, IRG makes use of a stereo vision process, the Ames Stereo Pipeline (ASP), to automatically generate DEMs from consecutive AMC image pairs. However, the DEMs currently produced by the ASP often contain errors and inconsistencies due to image noise, shadows, etc. The proposed method addresses this problem by making use of multiple observations and by considering their goodness of fit to improve both the accuracy and robustness of the estimate. The stepwise regression method is applied to estimate the relaxed weight of each observation.

  12. Bathymetry and digital elevation models of Coyote Creek and Alviso Slough, South San Francisco Bay, California

    USGS Publications Warehouse

    Foxgrover, Amy C.; Finlayson, David P.; Jaffe, Bruce E.; Fregoso, Theresa A.

    2011-01-01

    The bathymetry surveys were conducted using the state-of-the-art research vessel R/V Parke Snavely outfitted with an interferometric sidescan sonar for swath mapping in extremely shallow water. We provide high-resolution bathymetric data collected by the USGS. For the 2010 baseline survey we have merged the bathymetry with aerial lidar data that were collected for the USGS during the same time period to create a seamless, high-resolution digital elevation model (DEM) of the study area. The series of bathymetry datasets are provided at 1 m resolution and the 2010 bathymetric/topographic DEM at 2 m resolution. The data are formatted as both X, Y, Z text files and ESRI Arc ASCII files that are accompanied by FGDC compliant metadata.

  13. Vegetation Cover Mapping Based on Remote Sensing and Digital Elevation Model Data

    NASA Astrophysics Data System (ADS)

    Korets, M. A.; Ryzhkova, V. A.; Danilova, I. V.; Prokushkin, A. S.

    2016-06-01

    An algorithm of forest cover mapping based on combined GIS-based analysis of multi-band satellite imagery, digital elevation model, and ground truth data was developed. Using the classification principles and an approach of Russian forest scientist Kolesnikov, maps of forest types and forest growing conditions (FGC) were build. The first map is based on RS-composite classification, while the second map is constructed on the basis of DEM-composite classification. The spatial combination of this two layers were also used for extrapolation and mapping of ecosystem carbon stock values (kgC/m2). The proposed approach was applied for the test site area (~3600 km2), located in the Northern Siberia boreal forests of Evenkia near Tura settlement.

  14. Digital Elevation Model, 0.25 m, Barrow Environmental Observatory, Alaska, 2013

    DOE Data Explorer

    Cathy Wilson; Garrett Altmann

    2015-11-20

    This 0.25m horizontal resolution digital elevation model, DEM, was developed from Airborne Laser Altimetry flown by Aerometric Inc, now known as Quantum Spatial, Inc. on 12 July, 2013. One Mission was flown and the data jointly processed with LANL personnel to produce a 0.25m DEM covering a region approximately 2.8km wide and 12.4km long extending from the coast above North Salt Lagoon to south of Gas Well Road. This DEM encompasses a diverse range of hydrologic, geomorphic, geophysical and biological features typical of the Barrow Peninsula. Vertical accuracy at the 95% confidence interval was computed as 0.143m. The coordinate system, datum, and geoid for this DEM are UTM Zone 4N, NAD83 (2011), NAVD88 (GEOID09).

  15. Hydrologic analysis of a flood based on a new Digital Elevation Model

    NASA Astrophysics Data System (ADS)

    Nishio, M.; Mori, M.

    2015-06-01

    These The present study aims to simulate the hydrologic processes of a flood, based on a new, highly accurate Digital Elevation Model (DEM). The DEM is provided by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) of Japan, and has a spatial resolution of five meters. It was generated by the new National Project in 2012. The Hydrologic Engineering Center - Hydrologic Modeling System (HEC-HMS) is used to simulate the hydrologic process of a flood of the Onga River in Iizuka City, Japan. A large flood event in the typhoon season in 2003 caused serious damage around the Iizuka City area. Precise records of rainfall data from the Automated Meteorological Data Acquisition System (AMeDAS) were input into the HEC-HMS. The estimated flood area of the simulation results by HEC-HMS was identical to the observed flood area. A watershed aggregation map is also generated by HEC-HMS around the Onga River.

  16. Global detection of large lunar craters based on the CE-1 digital elevation model

    NASA Astrophysics Data System (ADS)

    Luo, Lei; Mu, Lingli; Wang, Xinyuan; Li, Chao; Ji, Wei; Zhao, Jinjin; Cai, Heng

    2013-12-01

    Craters, one of the most significant features of the lunar surface, have been widely researched because they offer us the relative age of the surface unit as well as crucial geological information. Research on crater detection algorithms (CDAs) of the Moon and other planetary bodies has concentrated on detecting them from imagery data, but the computational cost of detecting large craters using images makes these CDAs impractical. This paper presents a new approach to crater detection that utilizes a digital elevation model instead of images; this enables fully automatic global detection of large craters. Craters were delineated by terrain attributes, and then thresholding maps of terrain attributes were used to transform topographic data into a binary image, finally craters were detected by using the Hough Transform from the binary image. By using the proposed algorithm, we produced a catalog of all craters ⩾10 km in diameter on the lunar surface and analyzed their distribution and population characteristics.

  17. A Digital Elevation Model for Seaside, Oregon: Procedures, Data Sources, and Analysis

    NASA Astrophysics Data System (ADS)

    Venturato, A. J.

    2004-12-01

    As part of a pilot study to modernize Flood Insurance Rate Maps for the Federal Emergency Management Agency (FEMA), a digital elevation model (DEM) was developed for the purpose of modeling tsunami inundation for Seaside, Oregon. The DEM consists of elevation data values with a horizontal grid spacing of 1/3 arc seconds, or approximately 10 meters. The DEM was generated from several topographic and bathymetric data sources, requiring significant processing challenges. These challenges included conversion to a single specified projection, units, horizontal datum, and vertical datum; analysis and removal of errant data from hydrographic, topographic, and LIDAR surveys; and a point-by-point analysis of overlapping data sources. Data were collected from the National Oceanic and Atmospheric Administration National Ocean Service and National Geophysical Data Center, the U.S. Geological Survey, the Oregon Geospatial Data Center, the University of Oregon, and the Oregon Department of Geology and Mineral Industries. Data were converted into formats compatible with ESRI ArcGIS 3.3 software. ArcGIS was used for spatial analysis, error correction, and surface grid development using triangular irregular networking. Post-processing involved a consistency analysis and comparison with original data and control data sources. The final DEM was compared with a previous DEM developed for tsunami inundation modeling in 1997. Significant shoreline differences were found between the DEMs, resulting in an analysis of the shoreline changes around the mouth of the Necanicum River. The shoreline analysis includes a spatial analysis of digital orthophotos over the recent past and a review of historical accretion and erosion rates along the Columbia River littoral cell.

  18. New Techniques and Metrics for Describing Rivers Using High Resolution Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Bailey, P.; McKean, J. A.; Poulsen, F.; Ochoski, N.; Wheaton, J. M.

    2013-12-01

    Techniques for collecting high resolution digital elevation models (DEMs) of fluvial environments are cheaper and more widely accessible than ever before. These DEMs improve over traditional transect-based approaches because they represent the channel bed as a continuous surface. Advantages beyond the obvious more accurate representations of channel area and volume include the three dimensional representation of geomorphic features that directly influence the behavior of river organisms. It is possible to identify many of these habitats using topography alone, but when combined with the spatial arrangement of these areas within the channel, a more holistic view of biologic existence can be gleaned from the three dimensional representation of the channel. We present a new approach for measuring and describing channels that leverages the continuous nature of digital elevation model surfaces. Delivered via the River Bathymetry Toolkit (RBT) this approach is capable of not only reproducing the traditional transect-based metrics, but also includes novel techniques for generating stage independent channel measurements, regardless of the flow that occurred at the time of data capture. The RBT also possesses the capability of measuring changes over time, accounting for uncertainty using approaches adopted from the Geomorphic Change Detection (GCD) literature and producing maps and metrics for erosion and deposition. This new approach is available via the River Bathymetry Toolit that is structured to enable repeat systematic measurements over an unlimited number of sites. We present how this approach has been applied to over 500 sites in the Pacific Northwest as part of the Columbia Habitat Mapping Program (CHaMP). We demonstrate the new channel metrics for a range of these sites, both at the observed and simulated flows as well as examples of changes in channel morphology over time. We present an analysis comparing these new metrics against traditional transect based

  19. Digital elevation model and orthophotographs of Greenland based on aerial photographs from 1978-1987.

    PubMed

    Korsgaard, Niels J; Nuth, Christopher; Khan, Shfaqat A; Kjeldsen, Kristian K; Bjørk, Anders A; Schomacker, Anders; Kjær, Kurt H

    2016-01-01

    Digital Elevation Models (DEMs) play a prominent role in glaciological studies for the mass balance of glaciers and ice sheets. By providing a time snapshot of glacier geometry, DEMs are crucial for most glacier evolution modelling studies, but are also important for cryospheric modelling in general. We present a historical medium-resolution DEM and orthophotographs that consistently cover the entire surroundings and margins of the Greenland Ice Sheet 1978-1987. About 3,500 aerial photographs of Greenland are combined with field surveyed geodetic ground control to produce a 25 m gridded DEM and a 2 m black-and-white digital orthophotograph. Supporting data consist of a reliability mask and a photo footprint coverage with recording dates. Through one internal and two external validation tests, this DEM shows an accuracy better than 10 m horizontally and 6 m vertically while the precision is better than 4 m. This dataset proved successful for topographical mapping and geodetic mass balance. Other uses include control and calibration of remotely sensed data such as imagery or InSAR velocity maps. PMID:27164457

  20. Digital elevation model and orthophotographs of Greenland based on aerial photographs from 1978-1987.

    PubMed

    Korsgaard, Niels J; Nuth, Christopher; Khan, Shfaqat A; Kjeldsen, Kristian K; Bjørk, Anders A; Schomacker, Anders; Kjær, Kurt H

    2016-05-10

    Digital Elevation Models (DEMs) play a prominent role in glaciological studies for the mass balance of glaciers and ice sheets. By providing a time snapshot of glacier geometry, DEMs are crucial for most glacier evolution modelling studies, but are also important for cryospheric modelling in general. We present a historical medium-resolution DEM and orthophotographs that consistently cover the entire surroundings and margins of the Greenland Ice Sheet 1978-1987. About 3,500 aerial photographs of Greenland are combined with field surveyed geodetic ground control to produce a 25 m gridded DEM and a 2 m black-and-white digital orthophotograph. Supporting data consist of a reliability mask and a photo footprint coverage with recording dates. Through one internal and two external validation tests, this DEM shows an accuracy better than 10 m horizontally and 6 m vertically while the precision is better than 4 m. This dataset proved successful for topographical mapping and geodetic mass balance. Other uses include control and calibration of remotely sensed data such as imagery or InSAR velocity maps.

  1. Digital elevation model and orthophotographs of Greenland based on aerial photographs from 1978–1987

    PubMed Central

    Korsgaard, Niels J.; Nuth, Christopher; Khan, Shfaqat A.; Kjeldsen, Kristian K.; Bjørk, Anders A.; Schomacker, Anders; Kjær, Kurt H.

    2016-01-01

    Digital Elevation Models (DEMs) play a prominent role in glaciological studies for the mass balance of glaciers and ice sheets. By providing a time snapshot of glacier geometry, DEMs are crucial for most glacier evolution modelling studies, but are also important for cryospheric modelling in general. We present a historical medium-resolution DEM and orthophotographs that consistently cover the entire surroundings and margins of the Greenland Ice Sheet 1978–1987. About 3,500 aerial photographs of Greenland are combined with field surveyed geodetic ground control to produce a 25 m gridded DEM and a 2 m black-and-white digital orthophotograph. Supporting data consist of a reliability mask and a photo footprint coverage with recording dates. Through one internal and two external validation tests, this DEM shows an accuracy better than 10 m horizontally and 6 m vertically while the precision is better than 4 m. This dataset proved successful for topographical mapping and geodetic mass balance. Other uses include control and calibration of remotely sensed data such as imagery or InSAR velocity maps. PMID:27164457

  2. TecDEM: A MATLAB Based Toolbox for understanding Tectonics from Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Shahzad, F.; Mahmood, S. A.; Gloaguen, R.

    2009-04-01

    TecDEM is a MATLAB based tool box for understanding the tectonics from digital elevation models (DEMs) of any area. These DEMs can be derived from data of any spatial resolution (Low, medium and High). In the first step we extract drainage network from the DEMs using flow grid approach. Drainage network is a group of streams having elevation and catchment area information as a function of spatial locations. We implement an array of stream structure to study this drainage network. Knickpoints can be identified on each stream of the drainage network by a graphical user interface and are helpful for understanding stream morphology. Stream profile analysis in steady state condition is applied on all streams to calculate geomorphic parameters and regional uplift rates. Hack index is calculated for all the profiles at a certain interval and over the change of knickpoints. Reports menu of this tool box generates detailed statistics report, complete tabulated report, graphical output of each analyzed stream profile and Hack index profile. All the calculated values are part of stream structure and is saved as .mat file for later use with this tool box. The spatial distribution of geomorphic parameters, uplift rates and knickpoints are exported as a shape files for visualization in professional GIS software. We test this tool box on DEMs from different tectonic settings worldwide and received verifiable results with other studies.

  3. High Resolution Photogrammetric Digital Elevation Models Across Calving Fronts and Meltwater Channels in Greenland

    NASA Astrophysics Data System (ADS)

    Le Bel, D. A.; Brown, S.; Zappa, C. J.; Bell, R. E.; Frearson, N.; Tinto, K. J.

    2014-12-01

    Photogrammetric digital elevation models (DEMs) are a powerful approach for understanding elevation change and dynamics along the margins of the large ice sheets. The IcePod system, mounted on a New York Air National Guard LC-130, can measure high-resolution surface elevations with a Riegl VQ580 scanning laser altimeter and Imperx Bobcat IGV-B6620 color visible-wavelength camera (6600x4400 resolution); the surface temperature with a Sofradir IRE-640L infrared camera (spectral response 7.7-9.5 μm, 640x512 resolution); and the structure of snow and ice with two radar systems. We show the use of IcePod imagery to develop DEMs across calving fronts and meltwater channels in Greenland. Multiple over-flights of the Kangerlussaq Airport ramp have provided a test of the technique at a location with accurate, independently-determined elevation. Here the photogrammetric DEM of the airport, constrained by ground control measurements, is compared with the Lidar results. In July 2014 the IcePod ice-ocean imaging system surveyed the calving fronts of five outlet glaciers north of Jakobshavn Isbrae. We used Agisoft PhotoScan to develop a DEM of each calving front using imagery captured by the IcePod systems. Adjacent to the ice sheet, meltwater plumes foster mixing in the fjord, moving warm ocean water into contact with the front of the ice sheet where it can undercut the ice front and trigger calving. The five glaciers provide an opportunity to examine the calving front structure in relation to ocean temperature, fjord circulation, and spatial scale of the meltwater plumes. The combination of the accurate DEM of the calving front and the thermal imagery used to constrain the temperature and dynamics of the adjacent plume provides new insights into the ice-ocean interactions. Ice sheet margins provide insights into the connections between the surface meltwater and the fate of the water at the ice sheet base. Surface meltwater channels are visualized here for the first time using

  4. Investigation of potential sea level rise impact on the Nile Delta, Egypt using digital elevation models.

    PubMed

    Hasan, Emad; Khan, Sadiq Ibrahim; Hong, Yang

    2015-10-01

    In this study, the future impact of Sea Level Rise (SLR) on the Nile Delta region in Egypt is assessed by evaluating the elevations of two freely available Digital Elevation Models (DEMs): the SRTM and the ASTER-GDEM-V2. The SLR is a significant worldwide dilemma that has been triggered by recent climatic changes. In Egypt, the Nile Delta is projected to face SLR of 1 m by the end of the 21th century. In order to provide a more accurate assessment of the future SLR impact on Nile Delta's land and population, this study corrected the DEM's elevations by using linear regression model with ground elevations from GPS survey. The information for the land cover types and future population numbers were derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) land cover and the Gridded Population of the Worlds (GPWv3) datasets respectively. The DEM's vertical accuracies were assessed using GPS measurements and the uncertainty analysis revealed that the SRTM-DEM has positive bias of 2.5 m, while the ASTER-GDEM-V2 showed a positive bias of 0.8 m. The future inundated land cover areas and the affected population were illustrated based on two SLR scenarios of 0.5 m and 1 m. The SRTM DEM data indicated that 1 m SLR will affect about 3900 km(2) of cropland, 1280 km(2) of vegetation, 205 km(2) of wetland, 146 km(2) of urban areas and cause more than 6 million people to lose their houses. The overall vulnerability assessment using ASTER-GDEM-V2 indicated that the influence of SLR will be intense and confined along the coastal areas. For instance, the data indicated that 1 m SLR will inundate about 580 Km(2) (6%) of the total land cover areas and approximately 887 thousand people will be relocated. Accordingly, the uncertainty analysis of the DEM's elevations revealed that the ASTER-GDEM-V2 dataset product was considered the best to determine the future impact of SLR on the Nile Delta region. PMID:26410824

  5. Investigation of potential sea level rise impact on the Nile Delta, Egypt using digital elevation models.

    PubMed

    Hasan, Emad; Khan, Sadiq Ibrahim; Hong, Yang

    2015-10-01

    In this study, the future impact of Sea Level Rise (SLR) on the Nile Delta region in Egypt is assessed by evaluating the elevations of two freely available Digital Elevation Models (DEMs): the SRTM and the ASTER-GDEM-V2. The SLR is a significant worldwide dilemma that has been triggered by recent climatic changes. In Egypt, the Nile Delta is projected to face SLR of 1 m by the end of the 21th century. In order to provide a more accurate assessment of the future SLR impact on Nile Delta's land and population, this study corrected the DEM's elevations by using linear regression model with ground elevations from GPS survey. The information for the land cover types and future population numbers were derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) land cover and the Gridded Population of the Worlds (GPWv3) datasets respectively. The DEM's vertical accuracies were assessed using GPS measurements and the uncertainty analysis revealed that the SRTM-DEM has positive bias of 2.5 m, while the ASTER-GDEM-V2 showed a positive bias of 0.8 m. The future inundated land cover areas and the affected population were illustrated based on two SLR scenarios of 0.5 m and 1 m. The SRTM DEM data indicated that 1 m SLR will affect about 3900 km(2) of cropland, 1280 km(2) of vegetation, 205 km(2) of wetland, 146 km(2) of urban areas and cause more than 6 million people to lose their houses. The overall vulnerability assessment using ASTER-GDEM-V2 indicated that the influence of SLR will be intense and confined along the coastal areas. For instance, the data indicated that 1 m SLR will inundate about 580 Km(2) (6%) of the total land cover areas and approximately 887 thousand people will be relocated. Accordingly, the uncertainty analysis of the DEM's elevations revealed that the ASTER-GDEM-V2 dataset product was considered the best to determine the future impact of SLR on the Nile Delta region.

  6. A time series of TanDEM-X digital elevation models to monitor a glacier surge

    NASA Astrophysics Data System (ADS)

    Wendt, Anja; Mayer, Christoph; Lambrecht, Astrid; Floricioiu, Dana

    2016-04-01

    Bivachny Glacier, a tributary of the more than 70 km long Fedchenko Glacier in the Pamir Mountains, Central Asia, is a surge-type glacier with three known surges during the 20th century. In 2011, the most recent surge started which, in contrast to the previous ones, evolved down the whole glacier and reached the confluence with Fedchenko Glacier. Spatial and temporal glacier volume changes can be derived from high-resolution digital elevation models (DEMs) based on bistatic InSAR data from the TanDEM-X mission. There are nine DEMs available between 2011 and 2015 covering the entire surge period in time steps from few months up to one year. During the surge, the glacier surface elevation increased by up to 130 m in the lower part of the glacier; and change rates of up to 0.6 m per day were observed. The surface height dataset was complemented with glacier surface velocity information from TerraSAR-X/ TanDEM-X data as well as optical Landsat imagery. While the glacier was practically stagnant in 2000 after the end of the previous surge in the 1990s, the velocity increase started in 2011 in the upper reaches of the ablation area and successively moved downwards and intensified, reaching up to 4.0 m per day. The combination of surface elevation changes and glacier velocities, both of high temporal and spatial resolution, provides the unique opportunity to describe and analyse the evolution of the surge in unprecedented detail. Especially the relation between the mobilization front and the local mass transport provides insight into the surge dynamics.

  7. Validation of the ASTER Global Digital Elevation Model Version 2 over the conterminous United States

    USGS Publications Warehouse

    Gesch, Dean B.; Oimoen, Michael J.; Zhang, Zheng; Meyer, David J.; Danielson, Jeffrey J.

    2012-01-01

    The ASTER Global Digital Elevation Model Version 2 (GDEM v2) was evaluated over the conterminous United States in a manner similar to the validation conducted for the original GDEM Version 1 (v1) in 2009. The absolute vertical accuracy of GDEM v2 was calculated by comparison with more than 18,000 independent reference geodetic ground control points from the National Geodetic Survey. The root mean square error (RMSE) measured for GDEM v2 is 8.68 meters. This compares with the RMSE of 9.34 meters for GDEM v1. Another important descriptor of vertical accuracy is the mean error, or bias, which indicates if a DEM has an overall vertical offset from true ground level. The GDEM v2 mean error of -0.20 meters is a significant improvement over the GDEM v1 mean error of -3.69 meters. The absolute vertical accuracy assessment results, both mean error and RMSE, were segmented by land cover to examine the effects of cover types on measured errors. The GDEM v2 mean errors by land cover class verify that the presence of aboveground features (tree canopies and built structures) cause a positive elevation bias, as would be expected for an imaging system like ASTER. In open ground classes (little or no vegetation with significant aboveground height), GDEM v2 exhibits a negative bias on the order of 1 meter. GDEM v2 was also evaluated by differencing with the Shuttle Radar Topography Mission (SRTM) dataset. In many forested areas, GDEM v2 has elevations that are higher in the canopy than SRTM.

  8. Bathymetric survey and digital elevation model of Little Holland Tract, Sacramento-San Joaquin Delta, California

    USGS Publications Warehouse

    Snyder, Alexander G.; Lacy, Jessica R.; Stevens, Andrew W.; Carlson, Emily M.

    2016-06-10

    The U.S. Geological Survey conducted a bathymetric survey in Little Holland Tract, a flooded agricultural tract, in the northern Sacramento-San Joaquin Delta (the “Delta”) during the summer of 2015. The new bathymetric data were combined with existing data to generate a digital elevation model (DEM) at 1-meter resolution. Little Holland Tract (LHT) was historically diked off for agricultural uses and has been tidally inundated since an accidental levee breach in 1983. Shallow tidal regions such as LHT have the potential to improve habitat quality in the Delta. The DEM of LHT was developed to support ongoing studies of habitat quality in the area and to provide a baseline for evaluating future geomorphic change. The new data comprise 138,407 linear meters of real-time-kinematic (RTK) Global Positioning System (GPS) elevation data, including both bathymetric data collected from personal watercraft and topographic elevations collected on foot at low tide. A benchmark (LHT15_b1) was established for geodetic control of the survey. Data quality was evaluated both by comparing results among surveying platforms, which showed systematic offsets of 1.6 centimeters (cm) or less, and by error propagation, which yielded a mean vertical uncertainty of 6.7 cm. Based on the DEM and time-series measurements of water depth, the mean tidal prism of LHT was determined to be 2,826,000 cubic meters. The bathymetric data and DEM are available at http://dx.doi.org/10.5066/F7RX9954. 

  9. Bathymetric survey and digital elevation model of Little Holland Tract, Sacramento-San Joaquin Delta, California

    USGS Publications Warehouse

    Snyder, Alexander G.; Lacy, Jessica R.; Stevens, Andrew W.; Carlson, Emily M.

    2016-01-01

    The U.S. Geological Survey conducted a bathymetric survey in Little Holland Tract, a flooded agricultural tract, in the northern Sacramento-San Joaquin Delta (the “Delta”) during the summer of 2015. The new bathymetric data were combined with existing data to generate a digital elevation model (DEM) at 1-meter resolution. Little Holland Tract (LHT) was historically diked off for agricultural uses and has been tidally inundated since an accidental levee breach in 1983. Shallow tidal regions such as LHT have the potential to improve habitat quality in the Delta. The DEM of LHT was developed to support ongoing studies of habitat quality in the area and to provide a baseline for evaluating future geomorphic change. The new data comprise 138,407 linear meters of real-time-kinematic (RTK) Global Positioning System (GPS) elevation data, including both bathymetric data collected from personal watercraft and topographic elevations collected on foot at low tide. A benchmark (LHT15_b1) was established for geodetic control of the survey. Data quality was evaluated both by comparing results among surveying platforms, which showed systematic offsets of 1.6 centimeters (cm) or less, and by error propagation, which yielded a mean vertical uncertainty of 6.7 cm. Based on the DEM and time-series measurements of water depth, the mean tidal prism of LHT was determined to be 2,826,000 cubic meters. The bathymetric data and DEM are available at http://dx.doi.org/10.5066/F7RX9954. 

  10. Using Selective Drainage Methods to Extract Continuous Surface Flow from 1-Meter Lidar-Derived Digital Elevation Data

    USGS Publications Warehouse

    Poppenga, Sandra K.; Worstell, Bruce B.; Stoker, Jason M.; Greenlee, Susan K.

    2010-01-01

    Digital elevation data commonly are used to extract surface flow features. One source for high-resolution elevation data is light detection and ranging (lidar). Lidar can capture a vast amount of topographic detail because of its fine-scale ability to digitally capture the surface of the earth. Because elevation is a key factor in extracting surface flow features, high-resolution lidar-derived digital elevation models (DEMs) provide the detail needed to consistently integrate hydrography with elevation, land cover, structures, and other geospatial features. The U.S. Geological Survey has developed selective drainage methods to extract continuous surface flow from high-resolution lidar-derived digital elevation data. The lidar-derived continuous surface flow network contains valuable information for water resource management involving flood hazard mapping, flood inundation, and coastal erosion. DEMs used in hydrologic applications typically are processed to remove depressions by filling them. High-resolution DEMs derived from lidar can capture much more detail of the land surface than courser elevation data. Therefore, high-resolution DEMs contain more depressions because of obstructions such as roads, railroads, and other elevated structures. The filling of these depressions can significantly affect the DEM-derived surface flow routing and terrain characteristics in an adverse way. In this report, selective draining methods that modify the elevation surface to drain a depression through an obstruction are presented. If such obstructions are not removed from the elevation data, the filling of depressions to create continuous surface flow can cause the flow to spill over an obstruction in the wrong location. Using this modified elevation surface improves the quality of derived surface flow and retains more of the true surface characteristics by correcting large filled depressions. A reliable flow surface is necessary for deriving a consistently connected drainage

  11. ASTER-Derived 30-Meter-Resolution Digital Elevation Models of Afghanistan

    USGS Publications Warehouse

    Chirico, Peter G.; Warner, Michael B.

    2007-01-01

    INTRODUCTION The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is an imaging instrument aboard the Terra satellite, launched on December 19, 1999, as part of the National Aeronautics and Space Administration's (NASA) Earth Observing System (EOS). The ASTER sensor consists of three subsystems: the visible and near infrared (VNIR), the shortwave infrared (SWIR), and the thermal infrared (TIR), each with a different spatial resolution (VNIR, 15 meters; SWIR, 30 meters, TIR 90 meters). The VNIR system has the capability to generate along-track stereo images that can be used to create digital elevation models (DEMs) at 30-meter resolution. Currently, the only available DEM dataset for Afghanistan is the 90-meter-resolution Shuttle Radar Topography Mission (SRTM) data. This dataset is appropriate for macroscale DEM analysis and mapping. However, ASTER provides a low cost opportunity to generate higher resolution data. For this publication, study areas were identified around populated areas and areas where higher resolution elevation data were desired to assist in natural resource assessments. The higher resolution fidelity of these DEMs can also be used for other terrain analysis including landform classification and geologic structure analysis. For this publication, ASTER scenes were processed and mosaicked to generate 36 DEMs which were created and extracted using PCI Geomatics' OrthoEngine 3D Stereo software. The ASTER images were geographically registered to Landsat data with at least 15 accurate and well distributed ground control points with a root mean square error (RMSE) of less that one pixel (15 meters). An elevation value was then assigned to each ground control point by extracting the elevation from the 90-meter SRTM data. The 36 derived DEMs demonstrate that the software correlated on nearly flat surfaces and smooth slopes accurately. Larger errors occur in cloudy and snow-covered areas, lakes, areas with steep slopes, and

  12. A 10m telescope for submillimetre astronomy

    NASA Astrophysics Data System (ADS)

    Baars, J. W. M.; Mezger, P. G.

    1982-08-01

    Several atmospheric transmission windows between 350 micro m and 3 mm wavelength which allow astronomical observations from a sufficiently high and dry mountain site are examined. The design of a telescope for themm wavelength region, which will exhibit full performance at 350 micro m is outlined. The diameter of the reflector is approximately 10 m, the surface accuracy is 15 micro m and the pointing accuracy 1". Extensive use of carbon fiber reinforced plastic enables a light and stiff construction without significant thermal deformations.

  13. Scoria cones on Mars: Detailed investigation of morphometry based on high-resolution digital elevation models

    NASA Astrophysics Data System (ADS)

    Brož, Petr; Čadek, Ondřej; Hauber, Ernst; Rossi, Angelo Pio

    2015-09-01

    We analyze the shapes of 28 hypothesized scoria cones in three regions on Mars, i.e., Ulysses and Hydraotes Colles and Coprates Chasma. Using available High-Resolution Imaging Science Experiment and Context Camera (CTX) digital elevation models, we determine the basic morphometric characteristics of the cones and estimate from ballistic modeling the physical parameters of volcanic eruptions that could have formed them. When compared to terrestrial scoria cones, most of the studied cones show larger volumes (up to 4.2 × 109 m3), larger heights (up to 573 m), and smaller average slopes. The average slopes of the Ulysses, Hydraotes, and Coprates cones range between 7° and 25°, and the maximum slopes only rarely exceed 30°, which suggests only a minor role of scoria redistribution by avalanching. Ballistic analysis indicates that all cones were formed in a similar way, and their shapes are consistent with an ejection velocity about 2 times larger and a particle size about 20 times smaller than on Earth. Our results support the hypothesis that the investigated edifices were formed by low-energy Strombolian volcanic eruptions and hence are equivalent to terrestrial scoria cones. The cones in Hydraotes Colles and Coprates Chasma are on average smaller and steeper than the cones in Ulysses Colles, which is likely due to the difference in topographic elevation and the associated difference in atmospheric pressure. This study provides the expected morphometric characteristics of Martian scoria cones, which can be used to identify landforms consistent with this type of activity elsewhere on Mars and distinguish them from other conical edifices.

  14. Comparison of Surface Flow Features from Lidar-Derived Digital Elevation Models with Historical Elevation and Hydrography Data for Minnehaha County, South Dakota

    USGS Publications Warehouse

    Poppenga, Sandra K.; Worstell, Bruce B.; Stoker, Jason M.; Greenlee, Susan K.

    2009-01-01

    The U.S. Geological Survey (USGS) has taken the lead in the creation of a valuable remote sensing product by incorporating digital elevation models (DEMs) derived from Light Detection and Ranging (lidar) into the National Elevation Dataset (NED), the elevation layer of 'The National Map'. High-resolution lidar-derived DEMs provide the accuracy needed to systematically quantify and fully integrate surface flow including flow direction, flow accumulation, sinks, slope, and a dense drainage network. In 2008, 1-meter resolution lidar data were acquired in Minnehaha County, South Dakota. The acquisition was a collaborative effort between Minnehaha County, the city of Sioux Falls, and the USGS Earth Resources Observation and Science (EROS) Center. With the newly acquired lidar data, USGS scientists generated high-resolution DEMs and surface flow features. This report compares lidar-derived surface flow features in Minnehaha County to 30- and 10-meter elevation data previously incorporated in the NED and ancillary hydrography datasets. Surface flow features generated from lidar-derived DEMs are consistently integrated with elevation and are important in understanding surface-water movement to better detect surface-water runoff, flood inundation, and erosion. Many topographic and hydrologic applications will benefit from the increased availability of accurate, high-quality, and high-resolution surface-water data. The remotely sensed data provide topographic information and data integration capabilities needed for meeting current and future human and environmental needs.

  15. Validation of the Aster Global Digital Elevation Model Version 3 Over the Conterminous United States

    NASA Astrophysics Data System (ADS)

    Gesch, D.; Oimoen, M.; Danielson, J.; Meyer, D.

    2016-06-01

    The ASTER Global Digital Elevation Model Version 3 (GDEM v3) was evaluated over the conterminous United States in a manner similar to the validation conducted for the original GDEM Version 1 (v1) in 2009 and GDEM Version 2 (v2) in 2011. The absolute vertical accuracy of GDEM v3 was calculated by comparison with more than 23,000 independent reference geodetic ground control points from the U.S. National Geodetic Survey. The root mean square error (RMSE) measured for GDEM v3 is 8.52 meters. This compares with the RMSE of 8.68 meters for GDEM v2. Another important descriptor of vertical accuracy is the mean error, or bias, which indicates if a DEM has an overall vertical offset from true ground level. The GDEM v3 mean error of -1.20 meters reflects an overall negative bias in GDEM v3. The absolute vertical accuracy assessment results, both mean error and RMSE, were segmented by land cover type to provide insight into how GDEM v3 performs in various land surface conditions. While the RMSE varies little across cover types (6.92 to 9.25 meters), the mean error (bias) does appear to be affected by land cover type, ranging from -2.99 to +4.16 meters across 14 land cover classes. These results indicate that in areas where built or natural aboveground features are present, GDEM v3 is measuring elevations above the ground level, a condition noted in assessments of previous GDEM versions (v1 and v2) and an expected condition given the type of stereo-optical image data collected by ASTER. GDEM v3 was also evaluated by differencing with the Shuttle Radar Topography Mission (SRTM) dataset. In many forested areas, GDEM v3 has elevations that are higher in the canopy than SRTM. The overall validation effort also included an evaluation of the GDEM v3 water mask. In general, the number of distinct water polygons in GDEM v3 is much lower than the number in a reference land cover dataset, but the total areas compare much more closely.

  16. Validation of the ASTER Global Digital Elevation Model version 3 over the conterminous United States

    USGS Publications Warehouse

    Gesch, Dean B.; Oimoen, Michael J.; Danielson, Jeffrey J.; Meyer, David

    2016-01-01

    The ASTER Global Digital Elevation Model Version 3 (GDEM v3) was evaluated over the conterminous United States in a manner similar to the validation conducted for the original GDEM Version 1 (v1) in 2009 and GDEM Version 2 (v2) in 2011. The absolute vertical accuracy of GDEM v3 was calculated by comparison with more than 23,000 independent reference geodetic ground control points from the U.S. National Geodetic Survey. The root mean square error (RMSE) measured for GDEM v3 is 8.52 meters. This compares with the RMSE of 8.68 meters for GDEM v2. Another important descriptor of vertical accuracy is the mean error, or bias, which indicates if a DEM has an overall vertical offset from true ground level. The GDEM v3 mean error of −1.20 meters reflects an overall negative bias in GDEM v3. The absolute vertical accuracy assessment results, both mean error and RMSE, were segmented by land cover type to provide insight into how GDEM v3 performs in various land surface conditions. While the RMSE varies little across cover types (6.92 to 9.25 meters), the mean error (bias) does appear to be affected by land cover type, ranging from −2.99 to +4.16 meters across 14 land cover classes. These results indicate that in areas where built or natural aboveground features are present, GDEM v3 is measuring elevations above the ground level, a condition noted in assessments of previous GDEM versions (v1 and v2) and an expected condition given the type of stereo-optical image data collected by ASTER. GDEM v3 was also evaluated by differencing with the Shuttle Radar Topography Mission (SRTM) dataset. In many forested areas, GDEM v3 has elevations that are higher in the canopy than SRTM. The overall validation effort also included an evaluation of the GDEM v3 water mask. In general, the number of distinct water polygons in GDEM v3 is much lower than the number in a reference land cover dataset, but the total areas compare much more closely.

  17. Shoreline extraction from light detection and ranging digital elevation model data and aerial images

    NASA Astrophysics Data System (ADS)

    Yousef, Amr; Iftekharuddin, Khan M.; Karim, Mohammad A.

    2014-01-01

    There is an increased demand for understanding the accurate position of the shorelines. The automatic extraction of shorelines utilizing the digital elevation models (DEMs) obtained from light detection and ranging (LiDAR), aerial images, and multispectral images has become very promising. In this article, we develop two innovative algorithms that can effectively extract shorelines depending on the available data sources. The first is a multistep morphological technique that works on LiDAR DEM with respect to a tidal datum, whereas the second depends on the availability of training data to extract shorelines from LiDAR DEM fused with aerial images. Unlike similar techniques, the morphological approach detects and eliminates the outliers that result from waves, etc., by means of an anomaly test with neighborhood constraints. Additionally, it eliminates docks, bridges, and fishing piers along the extracted shorelines by means of Hough transform. The second approach extracts the shoreline by means of color space conversion of the aerial images and the support vector machines classifier to segment the fused data into water and land. We perform Monte-Carlo simulations to estimate the confidence interval for the error in shoreline position. Compared with other relevant techniques in literature, the proposed methods offer better accuracy in shoreline extraction.

  18. Problems and Solutions for InSAR Digital Elevation Model Generation of Mountainous Terrain

    NASA Astrophysics Data System (ADS)

    Eineder, M.

    2004-06-01

    During the last decade, the techniques to generate digital elevation models (DEM) from SAR interferometry have been demonstrated and refined to a quasi-operational status using data from the ERS tandem mission. With this experience and an improved single-pass system concept, data from the Shuttle Radar Topography Mission (SRTM) acquired in 2000 have been used to produce a global DEM with unprecedented quality. However, under the extreme viewing conditions in mountainous terrain both ERS and SRTM suffer from or even fail due to the radar specific layover and shadow effect that leaves significant areas uncovered and poses severe problems to phase unwrapping. The paper quantifies the areas leading to layover and shadow, and shows innovative ways to overcome shadow and improve phase unwrapping in general. The paper is organized in three major sections. Firstly, the problem to map slopes is addressed in a simplified statistical way. Strategies to optimize the incidence angle for single and multiple observations are proposed. Secondly, a new algorithm is presented that makes the best from shadow by actively using it to help phase unwrapping. Thirdly, an outlook on the use of deltak interferometry for phase unwrapping is given. The paper aims to improve the understanding of the mapping geometry of radar systems and the data currently available and to improve the concepts of future systems and missions.

  19. Prediction of Wind Speeds Based on Digital Elevation Models Using Boosted Regression Trees

    NASA Astrophysics Data System (ADS)

    Fischer, P.; Etienne, C.; Tian, J.; Krauß, T.

    2015-12-01

    In this paper a new approach is presented to predict maximum wind speeds using Gradient Boosted Regression Trees (GBRT). GBRT are a non-parametric regression technique used in various applications, suitable to make predictions without having an in-depth a-priori knowledge about the functional dependancies between the predictors and the response variables. Our aim is to predict maximum wind speeds based on predictors, which are derived from a digital elevation model (DEM). The predictors describe the orography of the Area-of-Interest (AoI) by various means like first and second order derivatives of the DEM, but also higher sophisticated classifications describing exposure and shelterness of the terrain to wind flux. In order to take the different scales into account which probably influence the streams and turbulences of wind flow over complex terrain, the predictors are computed on different spatial resolutions ranging from 30 m up to 2000 m. The geographic area used for examination of the approach is Switzerland, a mountainious region in the heart of europe, dominated by the alps, but also covering large valleys. The full workflow is described in this paper, which consists of data preparation using image processing techniques, model training using a state-of-the-art machine learning algorithm, in-depth analysis of the trained model, validation of the model and application of the model to generate a wind speed map.

  20. The Need of Nested Grids for Aerial and Satellite Images and Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Villa, G.; Mas, S.; Fernández-Villarino, X.; Martínez-Luceño, J.; Ojeda, J. C.; Pérez-Martín, B.; Tejeiro, J. A.; García-González, C.; López-Romero, E.; Soteres, C.

    2016-06-01

    Usual workflows for production, archiving, dissemination and use of Earth observation images (both aerial and from remote sensing satellites) pose big interoperability problems, as for example: non-alignment of pixels at the different levels of the pyramids that makes it impossible to overlay, compare and mosaic different orthoimages, without resampling them and the need to apply multiple resamplings and compression-decompression cycles. These problems cause great inefficiencies in production, dissemination through web services and processing in "Big Data" environments. Most of them can be avoided, or at least greatly reduced, with the use of a common "nested grid" for mutiresolution production, archiving, dissemination and exploitation of orthoimagery, digital elevation models and other raster data. "Nested grids" are space allocation schemas that organize image footprints, pixel sizes and pixel positions at all pyramid levels, in order to achieve coherent and consistent multiresolution coverage of a whole working area. A "nested grid" must be complemented by an appropriate "tiling schema", ideally based on the "quad-tree" concept. In the last years a "de facto standard" grid and Tiling Schema has emerged and has been adopted by virtually all major geospatial data providers. It has also been adopted by OGC in its "WMTS Simple Profile" standard. In this paper we explain how the adequate use of this tiling schema as common nested grid for orthoimagery, DEMs and other types of raster data constitutes the most practical solution to most of the interoperability problems of these types of data.

  1. TERRAIN: A computer program to process digital elevation models for modeling surface flow

    SciTech Connect

    Schwartz, P.M.; Levine, D.A.; Hunsaker, C.T.; Timmins, S.P.

    1995-08-01

    This document provides a step by step procedure, TERRAIN, for processing digital elevation models to calculate overland flow paths, watershed boundaries, slope, and aspect. The algorithms incorporated into TERRAIN have been used at two different geographic scales: first for small research watersheds where surface wetness measurements are made, and second for regional water modeling for entire counties. For small areas methods based on flow distribution may be more desirable, especially if time-dependent flow models are to be used. The main improvement in TERRAIN compared with earlier programs on which it is based is that it combines the conditioning routines, which remove depressions to avoid water storage, into a single process. Efficiency has also been improved, reducing run times as much as 10:1 and enabling the processing of very large grids in strips for regional modeling. Additionally, the ability to calculate the nutrient load delivered any cell in a watershed has been added. These improvements make TERRAIN a powerful tool for modeling surface flow.

  2. Automated delineation of karst sinkholes from LiDAR-derived digital elevation models

    NASA Astrophysics Data System (ADS)

    Wu, Qiusheng; Deng, Chengbin; Chen, Zuoqi

    2016-08-01

    Sinkhole mapping is critical for understanding hydrological processes and mitigating geological hazards in karst landscapes. Current methods for identifying sinkholes are primarily based on visual interpretation of low-resolution topographic maps and aerial photographs with subsequent field verification, which is labor-intensive and time-consuming. The increasing availability of high-resolution LiDAR-derived digital elevation data allows for an entirely new level of detailed delineation and analyses of small-scale geomorphologic features and landscape structures at fine scales. In this paper, we present a localized contour tree method for automated extraction of sinkholes in karst landscapes. One significant advantage of our automated approach for sinkhole extraction is that it may reduce inconsistencies and alleviate repeatability concerns associated with visual interpretation methods. In addition, the proposed method has contributed to improving the sinkhole inventory in several ways: (1) detection of non-inventoried sinkholes; (2) identification of previously inventoried sinkholes that have been filled; (3) delineation of sinkhole boundaries; and (4) characterization of sinkhole morphometric properties. We applied the method to Fillmore County in southeastern Minnesota, USA, and identified three times as many sinkholes as the existing database for the same area. The results suggest that previous visual interpretation method might significantly underestimate the number of potential sinkholes in the region. Our method holds great potential for creating and updating sinkhole inventory databases at a regional scale in a timely manner.

  3. Parallel Priority-Flood depression filling for trillion cell digital elevation models on desktops or clusters

    NASA Astrophysics Data System (ADS)

    Barnes, Richard

    2016-11-01

    Algorithms for extracting hydrologic features and properties from digital elevation models (DEMs) are challenged by large datasets, which often cannot fit within a computer's RAM. Depression filling is an important preconditioning step to many of these algorithms. Here, I present a new, linearly scaling algorithm which parallelizes the Priority-Flood depression-filling algorithm by subdividing a DEM into tiles. Using a single-producer, multi-consumer design, the new algorithm works equally well on one core, multiple cores, or multiple machines and can take advantage of large memories or cope with small ones. Unlike previous algorithms, the new algorithm guarantees a fixed number of memory access and communication events per subdivision of the DEM. In comparison testing, this results in the new algorithm running generally faster while using fewer resources than previous algorithms. For moderately sized tiles, the algorithm exhibits ∼60% strong and weak scaling efficiencies up to 48 cores, and linear time scaling across datasets ranging over three orders of magnitude. The largest dataset on which I run the algorithm has 2 trillion (2×1012) cells. With 48 cores, processing required 4.8 h wall-time (9.3 compute-days). This test is three orders of magnitude larger than any previously performed in the literature. Complete, well-commented source code and correctness tests are available for download from a repository.

  4. Grid digital elevation model based algorithms for determination of hillslope width functions through flow distance transforms

    NASA Astrophysics Data System (ADS)

    Liu, Jintao; Chen, Xi; Zhang, Xingnan; Hoagland, Kyle D.

    2012-04-01

    Recently developed hillslope storage dynamics theory can represent the essential physical behavior of a natural system by accounting explicitly for the plan shape of a hillslope in an elegant and simple way. As a result, this theory is promising for improving catchment-scale hydrologic modeling. In this study, grid digital elevation model (DEM) based algorithms for determination of hillslope geometric characteristics (e.g., hillslope units and width functions in hillslope storage dynamics models) are presented. This study further develops a method for hillslope partitioning, established by Fan and Bras (1998), by applying it on a grid network. On the basis of hillslope unit derivation, a flow distance transforms method (TD∞) is suggested in order to decrease the systematic error of grid DEM-based flow distance calculation caused by flow direction approximation to streamlines. Hillslope width transfer functions are then derived to convert the probability density functions of flow distance into hillslope width functions. These algorithms are applied and evaluated on five abstract hillslopes, and detailed tests and analyses are carried out by comparing the derivation results with theoretical width functions. The results demonstrate that the TD∞ improves estimations of the flow distance and thus hillslope width function. As the proposed procedures are further applied in a natural catchment, we find that the natural hillslope width function can be well fitted by the Gaussian function. This finding is very important for applying the newly developed hillslope storage dynamics models in a real catchment.

  5. A method for the processing and analysis of digital terrain elevation data. [Shiprock and Gallup Quadrangles, Arizona and New Mexico

    NASA Technical Reports Server (NTRS)

    Junkin, B. G. (Principal Investigator)

    1979-01-01

    A method is presented for the processing and analysis of digital topography data that can subsequently be entered in an interactive data base in the form of slope, slope length, elevation, and aspect angle. A discussion of the data source and specific descriptions of the data processing software programs are included. In addition, the mathematical considerations involved in the registration of raw digitized coordinate points to the UTM coordinate system are presented. Scale factor considerations are also included. Results of the processing and analysis are illustrated using the Shiprock and Gallup Quadrangle test data.

  6. Building a 2.5D Digital Elevation Model from 2D Imagery

    NASA Technical Reports Server (NTRS)

    Padgett, Curtis W.; Ansar, Adnan I.; Brennan, Shane; Cheng, Yang; Clouse, Daniel S.; Almeida, Eduardo

    2013-01-01

    When projecting imagery into a georeferenced coordinate frame, one needs to have some model of the geographical region that is being projected to. This model can sometimes be a simple geometrical curve, such as an ellipse or even a plane. However, to obtain accurate projections, one needs to have a more sophisticated model that encodes the undulations in the terrain including things like mountains, valleys, and even manmade structures. The product that is often used for this purpose is a Digital Elevation Model (DEM). The technology presented here generates a high-quality DEM from a collection of 2D images taken from multiple viewpoints, plus pose data for each of the images and a camera model for the sensor. The technology assumes that the images are all of the same region of the environment. The pose data for each image is used as an initial estimate of the geometric relationship between the images, but the pose data is often noisy and not of sufficient quality to build a high-quality DEM. Therefore, the source imagery is passed through a feature-tracking algorithm and multi-plane-homography algorithm, which refine the geometric transforms between images. The images and their refined poses are then passed to a stereo algorithm, which generates dense 3D data for each image in the sequence. The 3D data from each image is then placed into a consistent coordinate frame and passed to a routine that divides the coordinate frame into a number of cells. The 3D points that fall into each cell are collected, and basic statistics are applied to determine the elevation of that cell. The result of this step is a DEM that is in an arbitrary coordinate frame. This DEM is then filtered and smoothed in order to remove small artifacts. The final step in the algorithm is to take the initial DEM and rotate and translate it to be in the world coordinate frame [such as UTM (Universal Transverse Mercator), MGRS (Military Grid Reference System), or geodetic] such that it can be saved in

  7. Coastal Digital Elevation Models (DEMs) for tsunami hazard assessment on the French coasts

    NASA Astrophysics Data System (ADS)

    Maspataud, Aurélie; Biscara, Laurie; Hébert, Hélène; Schmitt, Thierry; Créach, Ronan

    2015-04-01

    Building precise and up-to-date coastal DEMs is a prerequisite for accurate modeling and forecasting of hydrodynamic processes at local scale. Marine flooding, originating from tsunamis, storm surges or waves, is one of them. Some high resolution DEMs are being generated for multiple coast configurations (gulf, embayment, strait, estuary, harbor approaches, low-lying areas…) along French Atlantic and Channel coasts. This work is undertaken within the framework of the TANDEM project (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) (2014-2017). DEMs boundaries were defined considering the vicinity of French civil nuclear facilities, site effects considerations and potential tsunamigenic sources. Those were identified from available historical observations. Seamless integrated topographic and bathymetric coastal DEMs will be used by institutions taking part in the study to simulate expected wave height at regional and local scale on the French coasts, for a set of defined scenarii. The main tasks were (1) the development of a new capacity of production of DEM, (2) aiming at the release of high resolution and precision digital field models referred to vertical reference frameworks, that require (3) horizontal and vertical datum conversions (all source elevation data need to be transformed to a common datum), on the basis of (4) the building of (national and/or local) conversion grids of datum relationships based on known measurements. Challenges in coastal DEMs development deal with good practices throughout model development that can help minimizing uncertainties. This is particularly true as scattered elevation data with variable density, from multiple sources (national hydrographic services, state and local government agencies, research organizations and private engineering companies) and from many different types (paper fieldsheets to be digitized, single beam echo sounder, multibeam sonar, airborne laser

  8. Differences in topographic characteristics computed from 100- and 1000-m resolution digital elevation model data

    USGS Publications Warehouse

    Wolock, D.M.; McCabe, G.J.

    2000-01-01

    Topographic characteristics computed from 100- and 1000-m resolution digital elevation model (DEM) data are compared for 50 locations representing varied terrain in the conterminous USA. The topographic characteristics are three parameters used extensively in hydrological research and modelling - slope (S), specific catchment area (A(s)) and a wetness index computed as the logarithm of the specific catchment area divided by slope [ln(A(s)/S)]. Slope values computed from 1000-m DEMs are smaller than those computed from 100-m DEMs; specific catchment area and the wetness index are larger for the 1000-m DEMs compared with the 100-m DEMs. Most of the differences between the 100- and 1000-m resolution DEMs can be attributed to terrain-discretization effects in the computation of the topographic characteristics and are not the result of smoothing or loss of terrain detail in the coarse data. In general, the terrain-discretization effects are greatest on flat terrain with long length-scale features, and the smoothing effects are greatest on steep terrain with short length-scale features. For the most part, the differences in the average values of the topographic characteristics computed from 100- and 1000-m resolution DEMs are predictable; that is, biases in the mean values for the characteristics computed from a 1000-m DEM can be corrected with simple linear equations. Copyright (C) 2000 John Wiley and Sons, Ltd.Topographic characteristics computed from 100- and 1000-m resolution digital elevation model (DEM) data are compared for 50 locations representing varied terrain in the conterminous USA. The topographic characteristics are three parameters used extensively in hydrological research and modelling - slope (S), specific catchment area (As) and a wetness index computed as the logarithm of the specific catchment area divided by slope [In(As/S)]. Slope values computed from 1000-m DEMs are smaller than those computed from 100-m DEMs; specific catchment area and the

  9. Assessment of multiresolution segmentation for delimiting drumlins in digital elevation models.

    PubMed

    Eisank, Clemens; Smith, Mike; Hillier, John

    2014-06-01

    Mapping or "delimiting" landforms is one of geomorphology's primary tools. Computer-based techniques such as land-surface segmentation allow the emulation of the process of manual landform delineation. Land-surface segmentation exhaustively subdivides a digital elevation model (DEM) into morphometrically-homogeneous irregularly-shaped regions, called terrain segments. Terrain segments can be created from various land-surface parameters (LSP) at multiple scales, and may therefore potentially correspond to the spatial extents of landforms such as drumlins. However, this depends on the segmentation algorithm, the parameterization, and the LSPs. In the present study we assess the widely used multiresolution segmentation (MRS) algorithm for its potential in providing terrain segments which delimit drumlins. Supervised testing was based on five 5-m DEMs that represented a set of 173 synthetic drumlins at random but representative positions in the same landscape. Five LSPs were tested, and four variants were computed for each LSP to assess the impact of median filtering of DEMs, and logarithmic transformation of LSPs. The testing scheme (1) employs MRS to partition each LSP exhaustively into 200 coarser scales of terrain segments by increasing the scale parameter (SP), (2) identifies the spatially best matching terrain segment for each reference drumlin, and (3) computes four segmentation accuracy metrics for quantifying the overall spatial match between drumlin segments and reference drumlins. Results of 100 tests showed that MRS tends to perform best on LSPs that are regionally derived from filtered DEMs, and then log-transformed. MRS delineated 97% of the detected drumlins at SP values between 1 and 50. Drumlin delimitation rates with values up to 50% are in line with the success of manual interpretations. Synthetic DEMs are well-suited for assessing landform quantification methods such as MRS, since subjectivity in the reference data is avoided which increases the

  10. Assessing water erosion in small watersheds using WEPP with GIS and digital elevation models

    SciTech Connect

    Cochrane, T.A.; Flanagan, D.C.

    1999-07-01

    Watershed erosion is a cause of nonpoint source pollution that can have an adverse effect on downstream and ecosystem water quality. Three different approaches using geographical information systems (GIS) and digital elevation models (DEMs) are described and evaluated for applying the Water Erosion Prediction Project (WEPP) model to assess water erosion in small watersheds. The first approach describes a typical application of the watershed version of WEPP using GIS only as an aid for construction of required input files. The second approach presents an automated method for the application of WEPP through the extraction of hillslopes and channels from DEMs. The third approach was WEPP model simulations on all possible flowpaths within a watershed. The three methods were applied to six research watersheds: one from Treynor, IA, two from Watkinsville, Ga., and three from Holly Springs, Miss. A statistical analysis for all methods and watersheds compared the predicted vs. measured runoff and sediment yield from watershed outlets on an event-by-event basis for runoff and sediment loss. The results indicate that the automatic hillslope method performs as well as the manual technique for all watersheds. A comparison of erosion from only hillslopes for all three methods indicates that the flowpath method is statistically comparable to the other methods. Results of the analysis suggest that, given an accurate DEM and valid input data for a simple watershed, the automatic hillslope method can be used to facilitate the application of the watershed version of WEPP, and that predictions should be comparable to an expert user's application of WEPP.

  11. Digital Elevation Models Aid the Analysis of Flows at Hrad Vallis, Mars

    NASA Astrophysics Data System (ADS)

    Mouginis-Mark, P. J.; Hamilton, C.; Garbeil, H.

    2015-12-01

    We have identified several landforms in the Hrad Vallis region of Mars (33.0o - 35.5oN, 216o - 218oW), which suggest that this area was covered by an ice sheet concurrent with volcanic eruptions. Using digital elevation models derived from High Resolution Imaging Science (HiRISE) and Context Camera (CTX) data, a reexamination of the area reveals a complex history including flow inflation and topographic control by transient topographic barriers. Among Amazonian-age outflow channels, Hrad Vallis is exceptional as it exhibits good evidence of magma/water interactions. It is inferred to have formed in association with a shallow igneous sill that melted part of the martian cryosphere and/or released water from an extensive aquifer to produce enormous lahar-like mud flows. Exposed ~30 m high dikes, 20 m high eroded mounds, and flow paths that are inconsistent with present-day topographic gradients, lead us to speculate that this area was covered by at least ~40 m of material (eolian deposits or ice) at the time of volcanic dike intrusion and flow emplacement. This material was subsequently removed leaving no clear morphologic signs (e.g., wind streaks, if eolian material; moraines, if ice). We favor the ice model because if this area was once ice-covered, it offers a plausible mode of formation (as pingoes) for some enigmatic 30 m high domes in the vicinity. At least one 120 km long flow from Hrad Vallis was emplaced as a pahoehoe-like flow that was confined by topographic obstacles and subsequently inflated to thickness of ~45 m. Although the direct relationship between this flow and Hrad Vallis remains to be determined, the inflated flow suggests a longer period of eruption/emplacement at a slower effusion rate than was previously believed.

  12. Testing 3D landform quantification methods with synthetic drumlins in a real digital elevation model

    NASA Astrophysics Data System (ADS)

    Hillier, John K.; Smith, Mike J.

    2012-06-01

    Metrics such as height and volume quantifying the 3D morphology of landforms are important observations that reflect and constrain Earth surface processes. Errors in such measurements are, however, poorly understood. A novel approach, using statistically valid ‘synthetic' landscapes to quantify the errors is presented. The utility of the approach is illustrated using a case study of 184 drumlins observed in Scotland as quantified from a Digital Elevation Model (DEM) by the ‘cookie cutter' extraction method. To create the synthetic DEMs, observed drumlins were removed from the measured DEM and replaced by elongate 3D Gaussian ones of equivalent dimensions positioned randomly with respect to the ‘noise' (e.g. trees) and regional trends (e.g. hills) that cause the errors. Then, errors in the cookie cutter extraction method were investigated by using it to quantify these ‘synthetic' drumlins, whose location and size is known. Thus, the approach determines which key metrics are recovered accurately. For example, mean height of 6.8 m is recovered poorly at 12.5 ± 0.6 (2σ) m, but mean volume is recovered correctly. Additionally, quantification methods can be compared: A variant on the cookie cutter using an un-tensioned spline induced about twice (× 1.79) as much error. Finally, a previously reportedly statistically significant (p = 0.007) difference in mean volume between sub-populations of different ages, which may reflect formational processes, is demonstrated to be only 30-50% likely to exist in reality. Critically, the synthetic DEMs are demonstrated to realistically model parameter recovery, primarily because they are still almost entirely the original landscape. Results are insensitive to the exact method used to create the synthetic DEMs, and the approach could be readily adapted to assess a variety of landforms (e.g. craters, dunes and volcanoes).

  13. Assessment of multiresolution segmentation for delimiting drumlins in digital elevation models

    NASA Astrophysics Data System (ADS)

    Eisank, Clemens; Smith, Mike; Hillier, John

    2014-06-01

    Mapping or "delimiting" landforms is one of geomorphology's primary tools. Computer-based techniques such as land-surface segmentation allow the emulation of the process of manual landform delineation. Land-surface segmentation exhaustively subdivides a digital elevation model (DEM) into morphometrically-homogeneous irregularly-shaped regions, called terrain segments. Terrain segments can be created from various land-surface parameters (LSP) at multiple scales, and may therefore potentially correspond to the spatial extents of landforms such as drumlins. However, this depends on the segmentation algorithm, the parameterization, and the LSPs. In the present study we assess the widely used multiresolution segmentation (MRS) algorithm for its potential in providing terrain segments which delimit drumlins. Supervised testing was based on five 5-m DEMs that represented a set of 173 synthetic drumlins at random but representative positions in the same landscape. Five LSPs were tested, and four variants were computed for each LSP to assess the impact of median filtering of DEMs, and logarithmic transformation of LSPs. The testing scheme (1) employs MRS to partition each LSP exhaustively into 200 coarser scales of terrain segments by increasing the scale parameter (SP), (2) identifies the spatially best matching terrain segment for each reference drumlin, and (3) computes four segmentation accuracy metrics for quantifying the overall spatial match between drumlin segments and reference drumlins. Results of 100 tests showed that MRS tends to perform best on LSPs that are regionally derived from filtered DEMs, and then log-transformed. MRS delineated 97% of the detected drumlins at SP values between 1 and 50. Drumlin delimitation rates with values up to 50% are in line with the success of manual interpretations. Synthetic DEMs are well-suited for assessing landform quantification methods such as MRS, since subjectivity in the reference data is avoided which increases the

  14. Assessment of multiresolution segmentation for delimiting drumlins in digital elevation models.

    PubMed

    Eisank, Clemens; Smith, Mike; Hillier, John

    2014-06-01

    Mapping or "delimiting" landforms is one of geomorphology's primary tools. Computer-based techniques such as land-surface segmentation allow the emulation of the process of manual landform delineation. Land-surface segmentation exhaustively subdivides a digital elevation model (DEM) into morphometrically-homogeneous irregularly-shaped regions, called terrain segments. Terrain segments can be created from various land-surface parameters (LSP) at multiple scales, and may therefore potentially correspond to the spatial extents of landforms such as drumlins. However, this depends on the segmentation algorithm, the parameterization, and the LSPs. In the present study we assess the widely used multiresolution segmentation (MRS) algorithm for its potential in providing terrain segments which delimit drumlins. Supervised testing was based on five 5-m DEMs that represented a set of 173 synthetic drumlins at random but representative positions in the same landscape. Five LSPs were tested, and four variants were computed for each LSP to assess the impact of median filtering of DEMs, and logarithmic transformation of LSPs. The testing scheme (1) employs MRS to partition each LSP exhaustively into 200 coarser scales of terrain segments by increasing the scale parameter (SP), (2) identifies the spatially best matching terrain segment for each reference drumlin, and (3) computes four segmentation accuracy metrics for quantifying the overall spatial match between drumlin segments and reference drumlins. Results of 100 tests showed that MRS tends to perform best on LSPs that are regionally derived from filtered DEMs, and then log-transformed. MRS delineated 97% of the detected drumlins at SP values between 1 and 50. Drumlin delimitation rates with values up to 50% are in line with the success of manual interpretations. Synthetic DEMs are well-suited for assessing landform quantification methods such as MRS, since subjectivity in the reference data is avoided which increases the

  15. A robust interpolation method for constructing digital elevation models from remote sensing data

    NASA Astrophysics Data System (ADS)

    Chen, Chuanfa; Liu, Fengying; Li, Yanyan; Yan, Changqing; Liu, Guolin

    2016-09-01

    A digital elevation model (DEM) derived from remote sensing data often suffers from outliers due to various reasons such as the physical limitation of sensors and low contrast of terrain textures. In order to reduce the effect of outliers on DEM construction, a robust algorithm of multiquadric (MQ) methodology based on M-estimators (MQ-M) was proposed. MQ-M adopts an adaptive weight function with three-parts. The weight function is null for large errors, one for small errors and quadric for others. A mathematical surface was employed to comparatively analyze the robustness of MQ-M, and its performance was compared with those of the classical MQ and a recently developed robust MQ method based on least absolute deviation (MQ-L). Numerical tests show that MQ-M is comparative to the classical MQ and superior to MQ-L when sample points follow normal and Laplace distributions, and under the presence of outliers the former is more accurate than the latter. A real-world example of DEM construction using stereo images indicates that compared with the classical interpolation methods, such as natural neighbor (NN), ordinary kriging (OK), ANUDEM, MQ-L and MQ, MQ-M has a better ability of preserving subtle terrain features. MQ-M replaces thin plate spline for reference DEM construction to assess the contribution to our recently developed multiresolution hierarchical classification method (MHC). Classifying the 15 groups of benchmark datasets provided by the ISPRS Commission demonstrates that MQ-M-based MHC is more accurate than MQ-L-based and TPS-based MHCs. MQ-M has high potential for DEM construction.

  16. Applying SRTM digital elevation model to unravel Quaternary drainage in forested areas of Northeastern Amazonia

    NASA Astrophysics Data System (ADS)

    Mantelli, Luiz Rogério; Rossetti, Dilce de Fátima; Albuquerque, Paulo Gurgel; Valeriano, Márcio de Morisson

    2009-12-01

    There has been an increasing number of articles stressing the advantage of applying remote sensing products of synthetic aperture radar (SAR) and interferometric synthetic aperture radar (InSAR) for rapidly enhancing the volume of geological data in Amazonian areas, where forest cover is dense and high, clouds are abundant and accessibility is limited. The majority of these studies has emphasized geomorphology as a tool for both discussing tectonic reactivations during the Cenozoic and reconstructing Quaternary paleolandscapes. This work applies Digital Elevation Model (DEM) derived from the Shuttle Radar Topography Mission (SRTM) for delineating past morphological features under dense rainforest in an Amazonian lowland area. Previous use of this tool in southwestern Marajó Island (northern Brazil) helped to delineate, with exceptional precision, a paleochannel network hidden under the rainforest, which would be barely detected with other available remote sensing products. Fieldwork revealed that these paleochannels are related to palimpsest drainage systems developed mostly during the last 40,000 14C yr B.P. Measured altitudes acquired during topographic surveys attested that paleochannel areas are slightly higher than adjacent floodplains. This fact determined the successful application of SRTM-DEM for mapping paleochannels in Marajó Island. Integration of SRTM data with sedimentological information collected during fieldwork suggests paleoflows derived from continental areas located to south of the study area. This paleodrainage was active when the island was still connected to mainland. With island detachment due to reactivation of tectonic faults, the channels became abandoned and were progressively forested. The results obtained in the present study indicate that SRTM-DEM has high potential for unraveling similar morphological features from many other Amazonian areas with low topography and a dense forest cover.

  17. Coupling of digital elevation model and rainfall-runoff model in storm drainage network design

    NASA Astrophysics Data System (ADS)

    Gumbo, Bekithemba; Munyamba, Nelson; Sithole, George; Savenije, Hubert H. G.

    Often planners and engineers are faced with various options and questions in storm drainage network design e.g. flow pattern, direction, runoff quantity and therefore size of drain, or scenario after a road, airfield or building has been constructed. In most instances planning without drainage in mind has caused failure or extensive damage to property including the storm water drains which channel the water away. With the advent of various modelling and geographic information systems (GIS) tools this problem can be averted. The University of Zimbabwe’s (UZ) main campus had its storm drainage network reconstructed at a cost of about US$100 000, because of persistent flooding. This paper describes a method of assessing the effectiveness of storm drainage networks by combining a digital elevation model (DEM) with a rainfall-runoff model based on the Soil Conservation Service South African manual (SCS-SA). The UZ campus was used as the test site. The DEM was generated from aerial photographs and the data imported into ArcView. The 3.0 km 2 basin was then delineated into sub-catchments using ArcView Hydro extension tools. The land-use, watershed and soil map of the UZ were merged in ArcView and initial curve numbers (CN) assigned. Using three years of daily rainfall data, runoff and peak flows were calculated for each sub-catchment. By overlaying the natural flow lines derived from the DEM with the reconstructed physical drains a comparison of the flow direction and the orientation of the drains was achieved. Peak flows where calculated for each delineated watershed and the results used to check the adequacy of the trapezoidal concrete lined drains. A combination of a DEM and rainfall-runoff model within a GIS platform proves to be useful in estimating runoff on partly urbanised watersheds and in determining the size and orientation of storm drains. It is particularly useful for new areas where development is being contemplated.

  18. Assessment of multiresolution segmentation for delimiting drumlins in digital elevation models

    PubMed Central

    Eisank, Clemens; Smith, Mike; Hillier, John

    2014-01-01

    Mapping or “delimiting” landforms is one of geomorphology's primary tools. Computer-based techniques such as land-surface segmentation allow the emulation of the process of manual landform delineation. Land-surface segmentation exhaustively subdivides a digital elevation model (DEM) into morphometrically-homogeneous irregularly-shaped regions, called terrain segments. Terrain segments can be created from various land-surface parameters (LSP) at multiple scales, and may therefore potentially correspond to the spatial extents of landforms such as drumlins. However, this depends on the segmentation algorithm, the parameterization, and the LSPs. In the present study we assess the widely used multiresolution segmentation (MRS) algorithm for its potential in providing terrain segments which delimit drumlins. Supervised testing was based on five 5-m DEMs that represented a set of 173 synthetic drumlins at random but representative positions in the same landscape. Five LSPs were tested, and four variants were computed for each LSP to assess the impact of median filtering of DEMs, and logarithmic transformation of LSPs. The testing scheme (1) employs MRS to partition each LSP exhaustively into 200 coarser scales of terrain segments by increasing the scale parameter (SP), (2) identifies the spatially best matching terrain segment for each reference drumlin, and (3) computes four segmentation accuracy metrics for quantifying the overall spatial match between drumlin segments and reference drumlins. Results of 100 tests showed that MRS tends to perform best on LSPs that are regionally derived from filtered DEMs, and then log-transformed. MRS delineated 97% of the detected drumlins at SP values between 1 and 50. Drumlin delimitation rates with values up to 50% are in line with the success of manual interpretations. Synthetic DEMs are well-suited for assessing landform quantification methods such as MRS, since subjectivity in the reference data is avoided which increases the

  19. Combining MESSENGER Data in Production and Analysis of Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Becker, K. J.; Howington-Kraus, E.; Thomas, O. H.; Neumann, G. A.; Mazarico, E.; Kirk, R. L.; Weller, L. A.; Edmundson, K. L.; Stephens, J. S.; Sawyers, R. J.; Robinson, M. S.; Solomon, S. C.

    2012-12-01

    The U.S. Geological Survey is combining image and laser altimetry data of Mercury acquired from instruments on the MESSENGER [1] spacecraft for the production and analysis of digital elevation models (DEMs). Precise image measurements that tie Mercury Laser Altimeter (MLA) [2] point data to Mercury Dual Imaging System (MDIS) [3] stereo pairs are obtained using the SOCET SET (®BAE Systems) digital photogrammetry software suite. These measurements will be added to existing Integrated Software for Imagers and Spectrometers [4] control networks used to produce global cartographic basemaps and a global DEM [5]. The MLA points serve as three-dimensional control points in a least-squares bundle adjustment [6] that improves image attitude and/or position parameters and generates improved triangulated ground coordinates for all tie and control points. The resulting point cloud is used to create an updated global DEM controlled to the MLA data. The MLA-to-MDIS image comparison also provides the boresight relationship between the two instruments. For quality assurance, several regional DEMs are created with SOCET SET for selected sites on Mercury that provide variation in terrain and observation conditions. These sites are used in the analysis and comparison of DEMs produced with a variety of methods and data sources (photogrammetry, photoclinometry, stereo techniques, and MLA), similar to comparisons that have been done for HRSC [7] and LRO [8] DEMs. Ultimately orthorectified cartographic products will be created by projecting MDIS images using the highest quality shape model available. [1] Solomon, S.C. et al., 2001. The MESSENGER mission to Mercury: Scientific objectives and implementation, Planet. Space Sci., 49, 1445-1465. [2] Zuber, M.T. et al., 2011. Orbital observations of Mercury with the Mercury Laser Altimeter, EPSC-DPS Joint Meeting, 6, abstract EPSC-DPS2011-278. [3] Hawkins, S.E. III et al., 2007. The Mercury Dual Imaging System on the MESSENGER spacecraft

  20. The use of UAV to document sloping landscapes to produce digital elevation models to examine environmental degradation

    NASA Astrophysics Data System (ADS)

    Themistocleous, K.; Agapiou, A.; Papadavid, G.; Christoforou, M.; Hadjimitsis, D. G.

    2015-10-01

    This paper focuses on the use of Unmanned Aerial Vehicles (UAVs) over the study area of Pissouri in Cyprus to document the sloping landscapes of the area. The study area has been affected by overgrazing, which has led to shifts in the vegetation patterns and changing microtopography of the soil. The UAV images were used to generate digital elevation models (DEMs) to examine the changes in microtopography. Next to that orthophotos were used to detect changes in vegetation patterns. The combined data of the digital elevation models and the orthophotos will be used to detect the occurrence of catastrophic shifts and mechanisms for desertification in the study area due to overgrazing. This study is part of the "CASCADE- Catastrophic shifts in dryland" project.

  1. The Importance of Precise Digital Elevation Models (DEM) in Modelling Floods

    NASA Astrophysics Data System (ADS)

    Demir, Gokben; Akyurek, Zuhal

    2016-04-01

    Digital elevation Models (DEM) are important inputs for topography for the accurate modelling of floodplain hydrodynamics. Floodplains have a key role as natural retarding pools which attenuate flood waves and suppress flood peaks. GPS, LIDAR and bathymetric surveys are well known surveying methods to acquire topographic data. It is not only time consuming and expensive to obtain topographic data through surveying but also sometimes impossible for remote areas. In this study it is aimed to present the importance of accurate modelling of topography for flood modelling. The flood modelling for Samsun-Terme in Blacksea region of Turkey is done. One of the DEM is obtained from the point observations retrieved from 1/5000 scaled orthophotos and 1/1000 scaled point elevation data from field surveys at x-sections. The river banks are corrected by using the orthophotos and elevation values. This DEM is named as scaled DEM. The other DEM is obtained from bathymetric surveys. 296 538 number of points and the left/right bank slopes were used to construct the DEM having 1 m spatial resolution and this DEM is named as base DEM. Two DEMs were compared by using 27 x-sections. The maximum difference at thalweg of the river bed is 2m and the minimum difference is 20 cm between two DEMs. The channel conveyance capacity in base DEM is larger than the one in scaled DEM and floodplain is modelled in detail in base DEM. MIKE21 with flexible grid is used in 2- dimensional shallow water flow modelling. The model by using two DEMs were calibrated for a flood event (July 9, 2012). The roughness is considered as the calibration parameter. From comparison of input hydrograph at the upstream of the river and output hydrograph at the downstream of the river, the attenuation is obtained as 91% and 84% for the base DEM and scaled DEM, respectively. The time lag in hydrographs does not show any difference for two DEMs and it is obtained as 3 hours. Maximum flood extents differ for the two DEMs

  2. High-resolution digital elevation model of lower Cowlitz and Toutle Rivers, adjacent to Mount St. Helens, Washington, based on an airborne lidar survey of October 2007

    USGS Publications Warehouse

    Mosbrucker, Adam

    2015-01-01

    Castle and Coldwater Lakes. Final results averaged about two laser last-return points per square meter. As reported by Watershed Sciences, Inc., vertical accuracy is 10 centimeters (cm) at the 95-percent confidence interval on bare road surfaces; however, over natural terrain, USGS found vertical accuracy to be 10–50 cm. This USGS data series contains the bare-earth lidar data as 1- and 10-meter (m) resolution Esri grid files. Digital-elevation data can be downloaded (1m_DEM.zip and 10m_DEM.zip), as well as a 1-m resolution hillshade image with pyramids (1m_hillshade.zip). These geospatial data files require geographic information system (GIS) software for viewing.

  3. High-resolution digital elevation model of Mount St. Helens crater and upper North Fork Toutle River basin, Washington, based on an airborne lidar survey of September 2009

    USGS Publications Warehouse

    Mosbrucker, Adam

    2014-01-01

    -return points per square meter. As reported by Watershed Sciences, Inc., vertical accuracy is 10 centimeters (cm) at the 95-percent confidence interval on bare road surfaces; however, over natural terrain, USGS found vertical accuracy to be 10–50 cm. This USGS data series contains the bare-earth lidar data as 1- and 10-meter (m) resolution Esri grid files. Digital-elevation data can be downloaded (1m_DEM.zip and 10m_DEM.zip), as well as a 1-m resolution hillshade image with pyramids (1m_hillshade.zip). These geospatial data files require geographic information system (GIS) software for viewing.

  4. Digital Elevation Models of the Earth derived from space-based observations: Advances and potential for geomorphological studies

    NASA Astrophysics Data System (ADS)

    Mouratidis, Antonios

    2013-04-01

    Digital Elevation Models (DEMs) are an inherently interdisciplinary topic, both due to their production and validation methods, as well as their significance for numerous disciplines. The most utilized contemporary topographic datasets worldwide are those of global DEMs. Several space-based sources have been used for the production of (almost) global DEMs, namely satellite Synthetic Aperture Radar (SAR) Interferometry/InSAR, stereoscopy of multispectral satellite images and altimetry, producing several versions of autonomous or mixed products (i.e. SRTM, ACE, ASTER-GDEM). Complementary space-based observations, such as those of Global Navigation Satellite Systems (GNSS), are also used, mainly for validation purposes. The apparent positive impact of these elevation datasets so far has been consolidated by the plethora of related scientific, civil and military applications. Topography is a prominent element for almost all Earth sciences, but in Geomorphology it is even more fundamental. In geomorphological studies, elevation data and thus DEMs can be extensively used for the extraction of both qualitative and quantitative information, such as relief classification, determination of slope and slope orientation, delineation of drainage basins, extraction of drainage networks and much more. Global DEMs are constantly becoming finer, i.e. of higher spatial resolution and more "sensitive" to elevation changes, i.e. of higher vertical accuracy and these progresses are undoubtedly considered as a major breakthrough, each time a new improved global DEM is released. Nevertheless, for Geomorphology in particular, if not already there, we are close to the point in time, where the need for discrimination between DSM (Digital Surface Model) and DTM (Digital Terrain Model) is becoming critical; if the distinction between vegetation and man-made structures on one side (DSM), and actual terrain elevation on the other side (DTM) cannot be made, then, in many cases, any further

  5. Stable isotopes and Digital Elevation Models to study nutrient inputs in high-Arctic lakes

    NASA Astrophysics Data System (ADS)

    Calizza, Edoardo; Rossi, David; Costantini, Maria Letizia; Careddu, Giulio; Rossi, Loreto

    2016-04-01

    Ice cover, run-off from the watershed, aquatic and terrestrial primary productivity, guano deposition from birds are key factors controlling nutrient and organic matter inputs in high-Arctic lakes. All these factors are expected to be significantly affected by climate change. Quantifying these controls is a key baseline step to understand what combination of factors subtends the biological productivity in Arctic lakes and will drive their ecological response to environmental change. Basing on Digital Elevation Models, drainage maps, and C and N elemental content and stable isotope analysis in sediments, aquatic vegetation and a dominant macroinvertebrate species (Lepidurus arcticus Pallas 1973) belonging to Tvillingvatnet, Storvatnet and Kolhamna, three lakes located in North Spitsbergen (Svalbard), we propose an integrated approach for the analysis of (i) nutrient and organic matter inputs in lakes; (ii) the role of catchment hydro-geomorphology in determining inter-lake differences in the isotopic composition of sediments; (iii) effects of diverse nutrient inputs on the isotopic niche of Lepidurus arcticus. Given its high run-off and large catchment, organic deposits in Tvillingvatnet where dominated by terrestrial inputs, whereas inputs were mainly of aquatic origin in Storvatnet, a lowland lake with low potential run-off. In Kolhamna, organic deposits seem to be dominated by inputs from birds, which actually colonise the area. Isotopic signatures were similar between samples within each lake, representing precise tracers for studies on the effect of climate change on biogeochemical cycles in lakes. The isotopic niche of L. aricticus reflected differences in sediments between lakes, suggesting a bottom-up effect of hydro-geomorphology characterizing each lake on nutrients assimilated by this species. The presented approach proven to be an effective research pathway for the identification of factors subtending to nutrient and organic matter inputs and transfer

  6. Rockfall susceptibility mapping of Yosemite Valley (USA) using a high-resolution digital elevation model

    NASA Astrophysics Data System (ADS)

    Pannatier, A.; Oppikofer, T.; Jaboyedoff, M.; Stock, G. M.

    2009-04-01

    In Yosemite National Park (California, USA) rockfalls from the steep valley flanks are frequent (>600 documented events in 150 years) and threaten infrastructure in this popular tourist area. This study focuses on a methodology to map the susceptibility to rockfall initiation based on a high-resolution digital elevation model (HRDEM) obtained from aerial laser scanning (1 meter cell size). This methodology is based on geometric factors derived from the HRDEM, i.e., the steepness of the topography, the presence of joints or fractures enabling either a planar or a wedge failure mechanism, and a high denudation potential. The slope angle histogram computed using standard GIS routines was simulated using Gaussian distributions, which were attributed to different parts of the topography, i.e., the cliffs, the valley flanks and the valley floor. Slopes steeper than 36° are found to form cliffs and thus potentially lead to rockfalls. A morpho-structural analysis of the HRDEM was performed in Coltop3D software to determine the major discontinuity sets that shape the topography. Kinematic analyses were made for each of these 7 discontinuity sets in order to determine the HRDEM cells that fulfil the geometric criteria for a planar or wedge failure mechanism. Most of the cliffs in Yosemite Valley enable one or both of these failure mechanisms. The denudation potential was assessed using the sloping local base level (SLBL) concept. The SLBL defines a basal erosion surface and the above lying rock masses (up to 400 m in some of the vertical cliffs) are susceptible to erosion by mass wasting. A thickness of 20 m above the SLBL surface was chosen as lower limit for the denudation potential criterion. The HRDEM cells that satisfy 1, 2 or all 3 criteria are considered having low, moderate and high susceptibility to rockfall initiation. The areas with highest susceptibility (El Capitan, Glacier Point, Yosemite Falls and Half Dome) coincide well with post-glacial talus accumulations

  7. Geomorphic Map of Worcester County, Maryland, Interpreted from a LIDAR-Based, Digital Elevation Model

    USGS Publications Warehouse

    Newell, Wayne L.; Clark, Inga

    2008-01-01

    A recently compiled mosaic of a LIDAR-based digital elevation model (DEM) is presented with geomorphic analysis of new macro-topographic details. The geologic framework of the surficial and near surface late Cenozoic deposits of the central uplands, Pocomoke River valley, and the Atlantic Coast includes Cenozoic to recent sediments from fluvial, estuarine, and littoral depositional environments. Extensive Pleistocene (cold climate) sandy dune fields are deposited over much of the terraced landscape. The macro details from the LIDAR image reveal 2 meter-scale resolution of details of the shapes of individual dunes, and fields of translocated sand sheets. Most terrace surfaces are overprinted with circular to elliptical rimmed basins that represent complex histories of ephemeral ponds that were formed, drained, and overprinted by younger basins. The terrains of composite ephemeral ponds and the dune fields are inter-shingled at their margins indicating contemporaneous erosion, deposition, and re-arrangement and possible internal deformation of the surficial deposits. The aggregate of these landform details and their deposits are interpreted as the products of arid, cold climate processes that were common to the mid-Atlantic region during the Last Glacial Maximum. In the Pocomoke valley and its larger tributaries, erosional remnants of sandy flood plains with anastomosing channels indicate the dynamics of former hydrology and sediment load of the watershed that prevailed at the end of the Pleistocene. As the climate warmed and precipitation increased during the transition from late Pleistocene to Holocene, dune fields were stabilized by vegetation, and the stream discharge increased. The increased discharge and greater local relief of streams graded to lower sea levels stimulated down cutting and created the deeply incised valleys out onto the continental shelf. These incised valleys have been filling with fluvial to intertidal deposits that record the rising sea

  8. Analysis of the influence of the digital elevation model characteristics on hydrodynamic simulations: the case of the Tagus River

    NASA Astrophysics Data System (ADS)

    Falcão, Ana Paula; Pestana, Rita; Matias, Magda P.; Gonçalves, Alexandre; Heleno, Sandra

    2014-05-01

    Floods are one of the major and hazardous natural events, with the potential to cause fatalities, displacement of people and damage to the environment, to severely compromise economic development and to undermine the economic activities, as the Floods Directive of the European Union clearly recalls (Directive 2007/60/EC). This Directive establishes a framework for the assessment and management of flood risks. As such, it relies on hydrodynamic simulation of floods. For this a single digital elevation model valid for the whole study area is a requirement and its construction usually implies the use of topographic and bathymetric data collected by distinct equipment and methods, at different times and acquired with a variety of spatial resolutions and accuracies. In this paper we present a comparison of hydrodynamic simulation results, in flood extension and water elevation level, of a Tagus River flood event cover the period between 5pm of December 29th, 2000 until 1am of January 9th, 2001, by using the combined digital elevation model resampled at a cell size of 15m, 30m and 50m. The study area is a section of 70 km of the Tagus River, between Tramagal and Santarém. The Tagus River is the longest of the Iberian Peninsula and is responsible for periodical floods in one of the most important agricultural areas in Portugal. For this area a digital elevation model acquired in 2008 by advanced interferometric techniques is available (5m of spatial resolution), accurate in the floodplain area but with no information in river channel since the radar signal has no ability to penetrate into water, and 29 cross-sections acquired by eco-sounder equipment in 2012, with 3km intervals are available. In order to analyse and validate those differences, a dataset with SAR imagery, provided by ESA, and the water levels measured at Almourol hydrometric station were used.

  9. Topographic analysis for tectonic geomorphology using digital image processing of elevation data from the Mississippi embayment and adjacent areas

    SciTech Connect

    Mayer, L. . Dept. of Geology)

    1993-03-01

    Image processing of digital elevation data provides a framework within which to evaluate the relative importance of tectonic and erosional signatures on the landscape. Shaded relief imaging of the elevation data illuminates regional topographic features coincident with the physiographic provinces bounding the Mississippi embayment portion of the Coastal Plain: the Ozark Plateaus and Ouachitas on the west, the Central Lowland on the north, and the Interior Low Plateaus on the east. Grayscale or colors from custom color lookup tables are assigned based on elevation. Stretching can be used to enhance a particular elevation range while spatial convolution kernels can be used to provide a robust and rapid means of designing high- and low-pass filters for the purpose of restricting the frequency range examined. Thresholding the elevation ranges and assigning boundaries of the resultant binary images allow for the rapid delineation of topographic contour lines and permits quantization of planform geometry. Forty one-degree by 30-minute quadrangles have been imaged for the purpose of delineating topographic features of possible tectonic origin.

  10. Determining the Suitability of Different Digital Elevation Models and Satellite Images for Fancy Maps. An Example of Cyprus

    NASA Astrophysics Data System (ADS)

    Drachal, J.; Kawel, A. K.

    2016-06-01

    The article describes the possibility of developing an overall map of the selected area on the basis of publicly available data. Such a map would take the form designed by the author with the colors that meets his expectations and a content, which he considers to be appropriate. Among the data available it was considered the use of satellite images of the terrain in real colors and, in the form of shaded relief, digital terrain models with different resolutions of the terrain mesh. Specifically the considered data were: MODIS, Landsat 8, GTOPO-30, SRTM-30, SRTM-1, SRTM-3, ASTER. For the test area the island of Cyprus was chosen because of the importance in tourism, a relatively small area and a clearly defined boundary. In the paper there are shown and discussed various options of the Cyprus terrain image obtained synthetically from variants of Modis, Landsat and digital elevation models of different resolutions.

  11. Synergetic merging of Cartosat-1 and RAMP to generate improved digital elevation model of Schirmacher oasis, east Antarctica

    NASA Astrophysics Data System (ADS)

    Jawak, S. D.; Luis, A. J.

    2014-11-01

    Available digital elevation models (DEMs) of Antarctic region generated by using radar altimetry and the Antarctic digital database (ADD) indicate elevation variations of up to hundreds of meters, which necessitates the generation of local DEM and its validation by using ground reference. An enhanced digital elevation model (eDEM) of the Schirmacher oasis region, east Antarctica, is generated synergistically by using Cartosat-1 stereo pair-derived photogrammetric DEM (CartoDEM)-based point elevation dataset and multitemporal radarsat Antarctic mapping project version 2 (RAMPv2) DEM-based point elevation dataset. In this study, we analyzed suite of interpolation techniques for constructing a DEM from RAMPv2 and CartoDEM-based point elevation datasets, in order to determine the level of confidence with which the interpolation techniques can generate a better interpolated continuous surface, and eventually improves the elevation accuracy of DEM from synergistically fused RAMPv2 and CartoDEM point elevation datasets. RAMPv2 points and CartoDEM points were used as primary data for various interpolation techniques such as ordinary kriging (OK), simple kriging (SK), universal kriging (UK), disjunctive kriging (DK) techniques, inverse distance weighted (IDW), global polynomial (GP) with power 1 and 2, local polynomial (LP) and radial basis functions (RBF). Cokriging of 2 variables with second dataset was used for ordinary cokriging (OCoK), simple cokriging (SCoK), universal cokriging (UCoK) and disjunctive cokriging (DCoK). The IDW, GP, LP, RBF, and kriging methods were applied to one variable, while Cokriging experiments were employed on two variables. The experiment of dataset and its combination produced two types of point elevation map categorized as (1) one variable (RAMPv2 Point maps and CartoDEM Point maps) and (2) two variables (RAMPv2 Point maps + CartoDEM Point maps). Interpolated surfaces were evaluated with the help of differential global positioning system

  12. Appraisal of digital terrain elevation data for low-altitude flight

    NASA Technical Reports Server (NTRS)

    Zelenka, Richard E.; Swenson, Harry N.

    1992-01-01

    The use of terrain elevation databases in advanced guidance and navigation systems has greatly expanded. However, the limitations and accuracies of these databases must be considered and established prior to safe system flight evaluation. A simple approach to quantify reasonable flight limits is presented and evaluated for a helicopter guidance system dependent on a terrain database. The flight test evaluated involved a helicopter equipped with a Global Positioning System (GPS) receiver and radar altimeter, and a ground station GPS receiver which provided improved helicopter positioning. The precision navigation and radar altimeter data was acquired while flying low-altitude missions in south-central Pennsylvania. The aircraft-determined terrain elevations were compared with the terrain predicted by the Defense Mapping Agency (DMA) Level 1 terrain elevation data for the same area. The results suggest a safe set clearance altitude of 220 ft for flight testing of a DMA-based guidance avionic in the same area.

  13. A computational-grid based system for continental drainage network extraction using SRTM digital elevation models

    NASA Technical Reports Server (NTRS)

    Curkendall, David W.; Fielding, Eric J.; Pohl, Josef M.; Cheng, Tsan-Huei

    2003-01-01

    We describe a new effort for the computation of elevation derivatives using the Shuttle Radar Topography Mission (SRTM) results. Jet Propulsion Laboratory's (JPL) SRTM has produced a near global database of highly accurate elevation data. The scope of this database enables computing precise stream drainage maps and other derivatives on Continental scales. We describe a computing architecture for this computationally very complex task based on NASA's Information Power Grid (IPG), a distributed high performance computing network based on the GLOBUS infrastructure. The SRTM data characteristics and unique problems they present are discussed. A new algorithm for organizing the conventional extraction algorithms [1] into a cooperating parallel grid is presented as an essential component to adapt to the IPG computing structure. Preliminary results are presented for a Southern California test area, established for comparing SRTM and its results against those produced using the USGS National Elevation Data (NED) model.

  14. Catchment properties in the Kruger National Park derived from the new TanDEM-X Intermediate Digital Elevation Model (IDEM)

    NASA Astrophysics Data System (ADS)

    Baade, J.; Schmullius, C.

    2015-04-01

    Digital Elevation Models (DEM) represent fundamental data for a wide range of Earth surface process studies. Over the past years the German TanDEM-X mission acquired data for a new, truly global Digital Elevation Model with unpreceded geometric resolution, precision and accuracy. First processed data sets (i. e. IDEM) with a geometric resolution of 0.4 to 3 arcsec have been made available for scientific purposes. This includes four 1° x 1° tiles covering the Kruger National Park in South Africa. Here we document the results of a local scale IDEM validation exercise utilizing RTK-GNSS-based ground survey points from a dried out reservoir basin and its vicinity characterized by pristine open Savanna vegetation. Selected precursor data sets (SRTM1, SRTM90, ASTER-GDEM2) were included in the analysis and highlight the immense progress in satellite-based Earth surface surveying over the past two decades. Surprisingly, the high precision and accuracy of the IDEM data sets have only little impact on the delineation of watersheds and the calculation of catchment size. But, when it comes to the derivation of topographic catchment properties (e.g. mean slope, etc.) the high resolution of the IDEM04 is of crucial importance, if - from a geomorphologist's view - it was not for the disturbing vegetation.

  15. Application of the Shuttle Laser Altimeter in an Accuracy Assessment of Global 1-Kilometer Digital Elevation Data

    NASA Technical Reports Server (NTRS)

    Harding, David J.; Carabajal, Claudia C.; Luthcke, Scott B.; Gesch, Dean B.

    1998-01-01

    Shuttle Laser Altimeter (SLA) data have been used to evaluate the accuracy of GTOPO30, the first comprehensive, 1 km resolution, global topographic data set. GTOPO30 was developed by the USGS Eros Data Center (EDC), in part, to address NASA's needs for a global topographic model in support of remote sensing instruments aboard the Earth Observing System AM-1 spacecraft. SLA flew as a part of the STS-72 mission in January, 1996 observing the latitude band from +/- 28.5 deg, and on STS-85 in August, 1997 extending the observations to +/- 57 deg. Combining the SLA ranging data with shuttle position and pointing knowledge yields surface elevation data of very high vertical accuracy in an Earth-centered, absolute reference frame (2.8 m rms difference for SLA-01 with respect to ocean reference surface). Use of the well-determined mean sea surface reference for calibration allows propagation of high accuracy altimetry onto the continents. 436,635 SLA-01 land elevations were compared to the GTOPO30 grid after conversion to a mean sea level vertical datum using the Earth Geoid Model 96, jointly developed by Goddard and NIMA. The comparison reveals systematic elevation biases in southern Asia, Africa, Australia, and south America on the order 10's to 100 meters in the GTOPO30 compilation on spatial scales of 100's to 1000's of kilometers. These biases are likely due to vertical datum errors in the topographic source materials used to compile GTOPO30, which primarily consist of Defense Mapping Agency (DMA) digital elevation and topographic map products. These biases imply that elevation corrections applied to land gravity measurements using these DMA source materials will be biased, leading to errors in geoid models incorporating these land gravity data.

  16. Implications of different digital elevation models and preprocessing techniques to delineate debris flow inundation hazard zones in El Salvador

    NASA Astrophysics Data System (ADS)

    Anderson, E. R.; Griffin, R.; Irwin, D.

    2013-12-01

    Heavy rains and steep, volcanic slopes in El Salvador cause numerous landslides every year, posing a persistent threat to the population, economy and environment. Although potential debris inundation hazard zones have been delineated using digital elevation models (DEMs), some disparities exist between the simulated zones and actual affected areas. Moreover, these hazard zones have only been identified for volcanic lahars and not the shallow landslides that occur nearly every year. This is despite the availability of tools to delineate a variety of landslide types (e.g., the USGS-developed LAHARZ software). Limitations in DEM spatial resolution, age of the data, and hydrological preprocessing techniques can contribute to inaccurate hazard zone definitions. This study investigates the impacts of using different elevation models and pit filling techniques in the final debris hazard zone delineations, in an effort to determine which combination of methods most closely agrees with observed landslide events. In particular, a national DEM digitized from topographic sheets from the 1970s and 1980s provide an elevation product at a 10 meter resolution. Both natural and anthropogenic modifications of the terrain limit the accuracy of current landslide hazard assessments derived from this source. Global products from the Shuttle Radar Topography Mission (SRTM) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM) offer more recent data but at the cost of spatial resolution. New data derived from the NASA Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) in 2013 provides the opportunity to update hazard zones at a higher spatial resolution (approximately 6 meters). Hydrological filling of sinks or pits for current hazard zone simulation has previously been achieved through ArcInfo spatial analyst. Such hydrological processing typically only fills pits and can lead to drastic modifications of original elevation values

  17. A fast topographic characterization of seismic station locations in Iran through integrated use of digital elevation models and GIS

    NASA Astrophysics Data System (ADS)

    Karimzadeh, Sadra; Miyajima, Masakatsu; Kamel, Batoul; Pessina, Vera

    2015-10-01

    We present topographic slope positions of seismic stations within four independent networks (IGUT, IIEES, GSI, and BHRC) in Iran through integrated use of digital elevation models and GIS. Since topographic amplification factor (TAF) due to ground surface irregularity could be one of the reasons of earthquake wave amplification and unexpected damage of structures located on the top of ridges in many previous studies, the ridge stations in the study area are recognized using topographic position index (TPI) as a spatial-based scale-dependent approach that helps in classification of topographic positions. We also present the correlation between local topographic positions and V {/s 30} along with Voronoi tiles of two networks (IGUT and IIEES). The obtained results can be profitably used in seismology to establish homogeneous subnetworks based on Voronoi tiles with precise feedback and in the formulation of new ground motion prediction equations with respect to topographic position and topographic amplification factor.

  18. Quantifying the performance of automated GIS-based geomorphological approaches for riparian zone delineation using digital elevation models

    NASA Astrophysics Data System (ADS)

    Fernández, D.; Barquín, J.; Álvarez-Cabria, M.; Peñas, F. J.

    2012-10-01

    Riparian zone delineation is a central issue for managing rivers and adjacent areas; however, criteria used to delineate them are still under debate. The area inundated by a 50-yr flood has been indicated as an optimal hydrological descriptor for riparian areas. This detailed hydrological information is usually only available for populated areas at risk of flooding. In this work we created several floodplain surfaces by means of two different GIS-based geomorphological approaches using digital elevation models (DEMs), in an attempt to find hydrologically meaningful potential riparian zones for river networks at the river basin scale. Objective quantification of the performance of the two geomorphologic models is provided by analysing coinciding and exceeding areas with respect to the 50-yr flood surface in different river geomorphological types.

  19. An automated approach for extracting Barrier Island morphology from digital elevation models

    NASA Astrophysics Data System (ADS)

    Wernette, Phillipe; Houser, Chris; Bishop, Michael P.

    2016-06-01

    The response and recovery of a barrier island to extreme storms depends on the elevation of the dune base and crest, both of which can vary considerably alongshore and through time. Quantifying the response to and recovery from storms requires that we can first identify and differentiate the dune(s) from the beach and back-barrier, which in turn depends on accurate identification and delineation of the dune toe, crest and heel. The purpose of this paper is to introduce a multi-scale automated approach for extracting beach, dune (dune toe, dune crest and dune heel), and barrier island morphology. The automated approach introduced here extracts the shoreline and back-barrier shoreline based on elevation thresholds, and extracts the dune toe, dune crest and dune heel based on the average relative relief (RR) across multiple spatial scales of analysis. The multi-scale automated RR approach to extracting dune toe, dune crest, and dune heel based upon relative relief is more objective than traditional approaches because every pixel is analyzed across multiple computational scales and the identification of features is based on the calculated RR values. The RR approach out-performed contemporary approaches and represents a fast objective means to define important beach and dune features for predicting barrier island response to storms. The RR method also does not require that the dune toe, crest, or heel are spatially continuous, which is important because dune morphology is likely naturally variable alongshore.

  20. Extracting topographic structure from digital elevation data for geographic information-system analysis

    USGS Publications Warehouse

    Jenson, Susan K.; Domingue, Julia O.

    1988-01-01

    The first phase of analysis is a conditioning phase that generates three data sets: the original OEM with depressions filled, a data set indicating the flow direction for each cell, and a flow accumulation data set in which each cell receives a value equal to the total number of cells that drain to it. The original OEM and these three derivative data sets can then be processed in a variety of ways to optionally delineate drainage networks, overland paths, watersheds for userspecified locations, sub-watersheds for the major tributaries of a drainage network, or pour point linkages between watersheds. The computer-generated drainage lines and watershed polygons and the pour point linkage information can be transferred to vector-based geographic information systems for futher analysis. Comparisons between these computergenerated features and their manually delineated counterparts generally show close agreement, indicating that these software tools will save analyst time spent in manual interpretation and digitizing.

  1. Releasing the digital elevation model for the whole Italian territory: a case study reporting two years of core-data dissemination for Earth Sciences communities and other stakeholders

    NASA Astrophysics Data System (ADS)

    Tarquini, Simone; Nannipieri, Luca

    2014-05-01

    EPOS (European Plate Observing System) is the European initiative for the implementation and integration of European Research Infrastructures in the field of Solid Earth Sciences. In particular, EPOS is aimed at creating a common environment for data exchange for both the scientific community and relevant stakeholders interested in Earth Sciences. In such a context, a service providing access to the complete topography of one of the countries participating in EPOS represents a step forward towards the realization of the EPOS mission. Here we report about two years of activity of a data dissemination service which released (for free) a digital elevation model (DEM) of the whole Italian territory at 10 m-resolution named TINTALY/01. The new TINITALY/01 DEM for the whole Italian territory was completed and presented by INGV in 2007. This DEM was the final result of a project funded by the Italian Ministry of the Environment. TINITALY/01 was completed in two phases: in a first phase, independent elevation models for single regions were derived, and in a second phase, all the regional models were merged into a single, seamless model covering the whole territory of Italy. In early 2012, a web portal was published (http://tinitaly.pi.ingv.it/) through which the above DEM is open for a full web-GIS navigation (3-D navigation in anaglyph mode or standard 2-D hillshade), and where internet navigators can ask for the download of the DEM dataset (in grid format, 10 m-resolution) through the compilation of an online form (http://tinitaly.pi.ingv.it/account_request_form.html). Submission of the form implies stating the destination of use for the data, and acceptance of the policy of use (i.e. no-profit use). After nearly two years from the opening of the portal, the DEM is still browsed by up to 10-20 users per day (about 3000 visits throughout 2013). As of 31 December 2013, about 220 users affiliated to nearly 150 different institutions or associations (i.e. universities

  2. Digital elevation model of King Edward VII Peninsula, West Antarctica, from SAR interferometry and ICESat laser altimetry

    USGS Publications Warehouse

    Baek, S.; Kwoun, Oh-Ig; Braun, Andreas; Lu, Zhiming; Shum, C.K.

    2005-01-01

    We present a digital elevation model (DEM) of King Edward VII Peninsula, Sulzberger Bay, West Antarctica, developed using 12 European Remote Sensing (ERS) synthetic aperture radar (SAR) scenes and 24 Ice, Cloud, and land Elevation Satellite (ICESat) laser altimetry profiles. We employ differential interferograms from the ERS tandem mission SAR scenes acquired in the austral fall of 1996, and four selected ICESat laser altimetry profiles acquired in the austral fall of 2004, as ground control points (GCPs) to construct an improved geocentric 60-m resolution DEM over the grounded ice region. We then extend the DEM to include two ice shelves using ICESat profiles via Kriging. Twenty additional ICESat profiles acquired in 2003-2004 are used to assess the accuracy of the DEM. After accounting for radar penetration depth and predicted surface changes, including effects due to ice mass balance, solid Earth tides, and glacial isostatic adjustment, in part to account for the eight-year data acquisition discrepancy, the resulting difference between the DEM and ICESat profiles is -0.57 ?? 5.88 m. After removing the discrepancy between the DEM and ICESat profiles for a final combined DEM using a bicubic spline, the overall difference is 0.05 ?? 1.35 m. ?? 2005 IEEE.

  3. A digital elevation model of the Greenland Ice Sheet derived from combined laser and radar altimetry data

    NASA Astrophysics Data System (ADS)

    Fredenslund Levinsen, Joanna; Smith, Ben; Sørensen, Louise S.; Forsberg, René

    2014-05-01

    When estimating elevation changes of ice-covered surfaces from radar altimetry, it is important to correct for slope-induced errors. They cause the reflecting point of the pulse to move up-slope and thus return estimates in the wrong coordinates. Slope-induced errors can be corrected for by introducing a Digital Elevation Model (DEM). In this work, such a DEM is developed for the Greenland Ice Sheet using a combination of Envisat radar and ICESat laser altimetry. If time permits, CryoSat radar altimetry will be included as well. The reference year is 2010 and the spatial resolution 2.5 x 2.5 km. This is in accordance with the results obtained in the ESA Ice Sheets CCI project showing that a 5 x 5 km grid spacing is reasonable for ice sheet-wide change detection (Levinsen et al., 2013). Separate DEMs will be created for the given data sets, and the geostatistical spatial interpolation method collocation will be used to merge them, thus adjusting for potential inter-satellite biases. The final DEM is validated with temporally and spatially agreeing airborne lidar data acquired in the NASA IceBridge and ESA CryoVex campaigns. The motivation for developing a new DEM is based on 1) large surface changes presently being observed, and mainly in margin regions, hence necessitating updated topography maps for accurately deriving and correcting surface elevation changes, and 2) although radar altimetry is subject to surface penetration of the signal into the snowpack, data is acquired continuously in time. This is not the case with e.g. ICESat, where laser altimetry data were obtained in periods of active lasers, i.e. three times a year with a 35-day repeat track. Previous DEMs e.g. have 2007 as the nominal reference year, or they are built merely from ICESat data. These have elevation errors as small as 10 cm, which is lower than for Envisat and CryoSat. The advantage of an updated DEM consisting of combined radar and laser altimetry therefore is the possibility of

  4. Assessing the quality of digital elevation models obtained from mini unmanned aerial vehicles for overland flow modelling in urban areas

    NASA Astrophysics Data System (ADS)

    Leitão, João P.; Moy de Vitry, Matthew; Scheidegger, Andreas; Rieckermann, Jörg

    2016-04-01

    Precise and detailed digital elevation models (DEMs) are essential to accurately predict overland flow in urban areas. Unfortunately, traditional sources of DEM, such as airplane light detection and ranging (lidar) DEMs and point and contour maps, remain a bottleneck for detailed and reliable overland flow models, because the resulting DEMs are too coarse to provide DEMs of sufficient detail to inform urban overland flows. Interestingly, technological developments of unmanned aerial vehicles (UAVs) suggest that they have matured enough to be a competitive alternative to satellites or airplanes. However, this has not been tested so far. In this study we therefore evaluated whether DEMs generated from UAV imagery are suitable for urban drainage overland flow modelling. Specifically, 14 UAV flights were conducted to assess the influence of four different flight parameters on the quality of generated DEMs: (i) flight altitude, (ii) image overlapping, (iii) camera pitch, and (iv) weather conditions. In addition, we compared the best-quality UAV DEM to a conventional lidar-based DEM. To evaluate both the quality of the UAV DEMs and the comparison to lidar-based DEMs, we performed regression analysis on several qualitative and quantitative metrics, such as elevation accuracy, quality of object representation (e.g. buildings, walls and trees) in the DEM, which were specifically tailored to assess overland flow modelling performance, using the flight parameters as explanatory variables. Our results suggested that, first, as expected, flight altitude influenced the DEM quality most, where lower flights produce better DEMs; in a similar fashion, overcast weather conditions are preferable, but weather conditions and other factors influence DEM quality much less. Second, we found that for urban overland flow modelling, the UAV DEMs performed competitively in comparison to a traditional lidar-based DEM. An important advantage of using UAVs to generate DEMs in urban areas is

  5. Use of TOPSAR digital elevation data to determine the 3-dimensional shape of an alluvial fan

    NASA Technical Reports Server (NTRS)

    Farr, Tom G.

    1995-01-01

    Landforms in arid regions record the interplay between tectonic forces and climate. Alluvial fans are a common landform in desert regions where the rate of uplift is greater than weathering or sedimentation. Changes in uplift rate or climatic conditions can lead to isolation of the currently forming fan surface through entrenchment and construction of another fan either further from the mountain front (decreased uplift or increased runoff) or closer to the mountain front (increased uplift or decreased runoff). Thus, many alluvial fans are made up of a mosaic of fan units of different age, some older than 1 million years. For this reason, determination of the stages of fan evolution can lead to a history of uplift and runoff. In an attempt to separate the effects of tectonic (uplift) and climatic (weathering, runoff, sedimentation) processes on the shapes of alluvial fan units, a modified conic equation developed by Troeh (1965) was fitted to TOPSAR digital topographic data for the Trail Canyon alluvial fan in Death Valley, California. This allows parameters for the apex position, slope, and radial curvature to be compared with unit age.

  6. Determination of fractal dimensions of digital elevation models for the watershed of Lake Jocasse, South Carolina

    SciTech Connect

    Wagenseil, R.

    1991-01-01

    There are persistent difficulties in monitoring nonpoint source pollution and in the related field of hydrology. The problems stem from variations in spatial distribution which are poorly understood and difficult to model with established methods. Two recent developments may offer a solution, if they are combined with care. The first development is the increasing capability of computer mapping, called geographic information systems (GIS). These systems can store, retrieve, and manipulate data with an explicit spatial structure. The second development is the field of fractal mathematics. Fractal mathematics includes geometric sets which have simple descriptions, despite complex appearances. One family of such fractal sets are the Brownian surfaces, which capture many of the qualities of natural land surfaces in a simple statistical model. Up until now, the Brownian models have been constrained by the assumption that the same statistical relationship holds over the entire surface. This is called the constraint of stationarity. The need to study how the landscape differs by location leads to relaxing the constraint of stationarity. This, in turn, causes some profound changes in the model. A special computer program applies the new model to a set of three-dimensional digital maps of natural terrain (DEMs). The model performs well, and highlights differences in landforms. This suggests several new approaches to spatial variation.

  7. The Sensitivity of a Volcanic Flow Model to Digital Elevation Models From Diverse Sources: Digitized Map Contours and Airborne Interferometric Radar

    NASA Astrophysics Data System (ADS)

    Stevens, N. F.; Manville, V.; Heron, D. W.

    2001-12-01

    A growing trend in the field of volcanic hazard assessment is the use of computer models of a variety of flows to predict potential areas of devastation. The accuracy of these computer models depends on two factors, the nature and veracity of the flow model itself, and the accuracy of the topographic data set over which it is run. All digital elevation models (DEMs) contain innate errors. The nature of these depends on the accuracy of the original measurements of the terrain, and on the method used to build the DEM. We investigate the effect that these errors have on the performance of a simple volcanic flow model designed to delineate areas at risk from lahar inundation. The volcanic flow model was run over two DEMs of southern Ruapehu volcano derived from (1) digitized 1:50,000 topographic maps, and (2) airborne C-band synthetic aperture radar interferometry obtained using the NASA AIRSAR system. On steep slopes (exceeding 4 degrees), drainage channels are more likely to be incised deeply, and flow paths predicted by the model are generally in agreement for both DEMs despite the differing nature of the source data. Over shallow slopes (approx. 4 degrees and less), where channels are less deep and are more likely to meander, problems were encountered with flow path prediction in both DEMs due to interpolation errors and forestry. The predicted lateral and longitudinal extent of deposit inundation was also sensitive to the type of DEM used, most likely in response to the differing degrees of surface texture preserved in the DEMs. A technique to refine contour-derived DEMs and reduce the error in predicted flow paths was tested to improve the reliability of the modeled flow path predictions. The suitability of forthcoming topographic measurements acquired by a single-pass space-borne instrument, the NASA Shuttle Radar Topography Mission (SRTM) are also tested.

  8. Drainage networks and watersheds delineation derived from TIN-based digital elevation models

    NASA Astrophysics Data System (ADS)

    Freitas, Henrique Rennó de Azeredo; Freitas, Corina da Costa; Rosim, Sergio; Oliveira, João Ricardo de Freitas

    2016-07-01

    Triangulated Irregular Networks (TIN) efficiently define terrain models from which drainage networks and watersheds can be extracted with important applications in hydrology. In this work, the TIN model is represented by a constrained Delaunay triangulation obtained from contour lines and sampled points. Paths of steepest descent calculated from the TIN are connected by processing the triangles according to an associated priority, then forming a drainage graph structure proposed to generate drainage networks from accumulated flows. Major problems such as flat areas and pits that create inconsistencies in the terrain model and discontinuities in flows are removed with procedures that interpolate the elevation values of particular points on the TIN. Drainage networks are defined by arbitrary threshold values, and their associated watersheds and subwatersheds are then delineated. TIN results are qualitatively and quantitatively compared to an available reference drainage network, and also to regular grid results generated with the TerraHidro system. The drainage networks automatically obtained from the drainage graph highly agree to the main courses of water on the terrain, indicating that the TIN is an attractive alternative terrain model for hydrological purposes, and that the proposed drainage graph can be used for the automatic extraction of drainage networks that are consistent with real-world hydrological patterns.

  9. Delineation of Flood Prone Areas using Digital Elevation Models: Scale Dependence

    NASA Astrophysics Data System (ADS)

    di Leo, M.; Manfreda, S.; Sole, A.; Fiorentino, M.

    2009-04-01

    The delineation of the areas subject to flood inundations raises complex problems regarding the definition of hydrological forcing and the parametrization of models for flood wave propagation (e.g., Horritt & Bates, 2000, 2002). The increasing availability of new technologies for the measurement of surface elevation (eg GPS, SAR interferometry, radar and laser altimetry) led to an increase in the attraction of DEM-based procedures for the delineation of floodplains. In recent years, much effort has gone into the identification of flood prone areas through the use of hydrological and hydraulic studies carried out by River Basin Authorities (public institutions dedicated to river basins management). These studies are generally based on topographic surveys and numerical modelling for the flood wave propagation providing an enormous database rarely used for post processing. Manfreda et al. (2006) have recently used the technical documentation, produced during the definition of Hydrogeological Management Plan by the River Basin Authorities, to define a synthetic procedure for the delineation of flood inundation exposure. The relevance of such techniques lies in the ability to characterize, at least at first approximation, portions of the territory where is not possible to run expensive hydrological-hydraulic simulations. The development of simplified methodologies is taken further in the present study to investigate the relationship between areas exposed to flood inundation and the geomorphologic characteristics of the terrain (contributing area, local slope of the surface, curvature, TOPMODEL topographic index) showing a strong correlation with the TOPMODEL topographic index. Manfreda et al. (2006) also defined a new expression of the topographical index more suited to the task of delineating flood exposure directly from a DEM analysis. This permitted the definition of a fast procedure for the calculation of flood inundation areas using a threshold level (ITms) to

  10. Digital Elevation Model Creation Using SfM on High-Altitude Snow-Covered Surfaces at Summit, Greenland

    NASA Astrophysics Data System (ADS)

    Millstein, J. D.; Hawley, R. L.

    2015-12-01

    Structure from Motion (SfM) provides a means through which a digital elevation model (DEM) can be constructed with data acquired at a relatively low cost when compared to other current alternatives. Using an Unmanned Aerial Vehicle (UAV), a large area can be efficiently covered at high spatial resolution to quantify regional topography. Structure from Motion applied to photogrammetric techniques from a UAV has proven to be a successful tool, but challenges to UAV-based SfM include high-altitude locations with few distinctive surface features and minor textural differences. In June 2015, we piloted a small UAV (Quest) in order to conduct a topographical survey of Summit Camp, Greenland using SfM. Summit Camp sits at a surface elevation of 3200 meters above sea level, and occupies a snow-covered surface. The flat, very uniform terrain proved to be a challenge when flying the UAV and processing imagery using SfM techniques. In this presentation we discuss the issues both with operating a UAV instrument platform at high-altitude in the polar regions and interpreting the resulting DEM from a snow-covered region. The final DEM of Summit Camp covers a large portion of the surface area directly impacted by camp activities. In particular, volume calculations of drifting snow gauge an estimate of the equipment hours that will be required to clear and unearth structures. Investigation of surface roughness at multiple length scales can similarly provide insight on the accuracy of the DEM when observing texturally uniform surfaces.

  11. Development of an Antarctic digital elevation model by integrating cartographic and remotely sensed data: A geographic information system based approach

    NASA Astrophysics Data System (ADS)

    Liu, Hongxing; Jezek, Kenneth C.; Li, Biyan

    1999-10-01

    We present a high-resolution digital elevation model (DEM) of the Antarctic. It was created in a geographic information system (GIS) environment by integrating the best available topographic data from a variety of sources. Extensive GIS-based error detection and correction operations ensured that our DEM is free of gross errors. The carefully designed interpolation algorithms for different types of source data and incorporation of surface morphologic information preserved and enhanced the fine surface structures present in the source data. The effective control of adverse edge effects and the use of the Hermite blending weight function in data merging minimized the discontinuities between different types of data, leading to a seamless and topographically consistent DEM throughout the Antarctic. This new DEM provides exceptional topographical details and represents a substantial improvement in horizontal resolution and vertical accuracy over the earlier, continental-scale renditions, particularly in mountainous and coastal regions. It has a horizontal resolution of 200 m over the rugged mountains, 400 m in the coastal regions, and approximately 5 km in the interior. The vertical accuracy of the DEM is estimated at about 100-130 m over the rugged mountainous area, better than 2 m for the ice shelves, better than 15 m for the interior ice sheet, and about 35 m for the steeper ice sheet perimeter. The Antarctic DEM can be obtained from the authors.

  12. Using X-band Weather Radar Measurements to Monitor the Integrity of Digital Elevation Models for Synthetic Vision Systems

    NASA Technical Reports Server (NTRS)

    Young, Steve; UijtdeHaag, Maarten; Sayre, Jonathon

    2003-01-01

    Synthetic Vision Systems (SVS) provide pilots with displays of stored geo-spatial data representing terrain, obstacles, and cultural features. As comprehensive validation is impractical, these databases typically have no quantifiable level of integrity. Further, updates to the databases may not be provided as changes occur. These issues limit the certification level and constrain the operational context of SVS for civil aviation. Previous work demonstrated the feasibility of using a realtime monitor to bound the integrity of Digital Elevation Models (DEMs) by using radar altimeter measurements during flight. This paper describes an extension of this concept to include X-band Weather Radar (WxR) measurements. This enables the monitor to detect additional classes of DEM errors and to reduce the exposure time associated with integrity threats. Feature extraction techniques are used along with a statistical assessment of similarity measures between the sensed and stored features that are detected. Recent flight-testing in the area around the Juneau, Alaska Airport (JNU) has resulted in a comprehensive set of sensor data that is being used to assess the feasibility of the proposed monitor technology. Initial results of this assessment are presented.

  13. Capturing Micro-topography of an Arctic Tundra Landscape through Digital Elevation Models (DEMs) Acquired from Various Remote Sensing Platforms

    NASA Astrophysics Data System (ADS)

    Vargas, S. A., Jr.; Tweedie, C. E.; Oberbauer, S. F.

    2013-12-01

    The need to improve the spatial and temporal scaling and extrapolation of plot level measurements of ecosystem structure and function to the landscape level has been identified as a persistent research challenge in the arctic terrestrial sciences. Although there has been a range of advances in remote sensing capabilities on satellite, fixed wing, helicopter and unmanned aerial vehicle platforms over the past decade, these present costly, logistically challenging (especially in the Arctic), technically demanding solutions for applications in an arctic environment. Here, we present a relatively low cost alternative to these platforms that uses kite aerial photography (KAP). Specifically, we demonstrate how digital elevation models (DEMs) were derived from this system for a coastal arctic landscape near Barrow, Alaska. DEMs of this area acquired from other remote sensing platforms such as Terrestrial Laser Scanning (TLS), Airborne Laser Scanning, and satellite imagery were also used in this study to determine accuracy and validity of results. DEMs interpolated using the KAP system were comparable to DEMs derived from the other platforms. For remotely sensing acre to kilometer square areas of interest, KAP has proven to be a low cost solution from which derived products that interface ground and satellite platforms can be developed by users with access to low-tech solutions and a limited knowledge of remote sensing.

  14. An efficient variant of the Priority-Flood algorithm for filling depressions in raster digital elevation models

    NASA Astrophysics Data System (ADS)

    Zhou, Guiyun; Sun, Zhongxuan; Fu, Suhua

    2016-05-01

    Depressions are common features in raster digital elevation models (DEMs) and they are usually filled for the automatic extraction of drainage networks. Among existing algorithms for filling depressions, the Priority-Flood algorithm substantially outperforms other algorithms in terms of both time complexity and memory requirement. The Priority-Flood algorithm uses a priority queue to process cells. This study proposes an efficient variant of the Priority-Flood algorithm, which considerably reduces the number of cells processed by the priority queue by using region-growing procedures to process the majority of cells not within depressions or flat regions. We present three implementations of the proposed variant: two-pass implementation, one-pass implementation and direct implementation. Experiments are conducted on thirty DEMs with a resolution of 3m. All three implementations run faster than existing variants of the algorithm for all tested DEMs. The one-pass implementation runs the fastest and the average speed-up over the fastest existing variant is 44.6%.

  15. Using X-band weather radar measurements to monitor the integrity of digital elevation models for synthetic vision systems

    NASA Astrophysics Data System (ADS)

    Young, Steven D.; Uijt de Haag, Maarten; Sayre, Jonathon

    2003-09-01

    Synthetic Vision Systems (SVS) provide pilots with displays of stored geo-spatial data representing terrain, obstacles, and cultural features. As comprehensive validation is impractical, these databases typically have no quantifiable level of integrity. Futher, updates to the databases may not be provided as changes occur. These issues limit the certification level and constrain the operational context of SVS for civil aviation. Previous work demonstrated the feasibility of using a real-time monitor to bound the integrity of Digital Elevation Models (DEMs) by using radar altimeter measurements during flight. This paper describes an extension of this concept to include X-band Weather Radar (WxR) measurements. This enables the monitor to detect additional classes of DEM errors and to reduce the exposure time associated with integrity threats. Feature extraction techniques are used along with a statistical assessment of similarity measures between the sensed and stored features that are detected. Recent flight-testing in the area around Juneau, Alaska Airport (JNU) has resulted in a comprehensive set of sensor data that is being used to assess the feasibility of the proposed monitor technology. Initial results of this assessment are presented.

  16. Extraction of cross sections from digital elevation model for one-dimensional dam-break wave propagation in mountain valleys

    NASA Astrophysics Data System (ADS)

    Pilotti, Marco

    2016-01-01

    Shallow Water Equations (SWE) provide a fundamental component for the quantification and mapping of hydraulic hazard. In steep mountain valleys, the use of one-dimensional SWE (also known as St. Venant Equations, SVE) is often legitimate and computationally competitive against two-dimensional solvers. However, in the same environment, the solution of SVE is hindered by the need of an accurate bathymetric reconstruction, which implies a number of cross sections which cannot be readily acquired by conventional field surveys. On the other hand, Digital Elevation Models (DEM) with resolution adequate for studies of flood propagation are available in many areas of the world. In this paper, I propose to compute cross sections automatically by operating along the channel network derived from a valley's raster DEM, on the basis of algorithms that hitherto have been used for geomorphological and hydrological purposes. The extraction process can be refined by varying cross section inter-distance and width, in order to prevent superimpositions that might occur due to the sinuosity of the thalweg and to better capture the valley's local topography. At the end of this process, the geometric functions needed by SVE solvers can be computed for each cross section. A software tool that implements the described algorithm is provided to the scientific community.

  17. Evaluation of the effects of the seasonal variation of solar elevation angle and azimuth on the processes of digital filtering and thematic classification of relief units

    NASA Technical Reports Server (NTRS)

    Parada, N. D. J. (Principal Investigator); Novo, E. M. L. M.

    1983-01-01

    The effects of the seasonal variation of illumination over digital processing of LANDSAT images are evaluated. Two sets of LANDSAT data referring to the orbit 150 and row 28 were selected with illumination parameters varying from 43 deg to 64 deg for azimuth and from 30 deg to 36 deg for solar elevation respectively. IMAGE-100 system permitted the digital processing of LANDSAT data. Original images were transformed by means of digital filtering so as to enhance their spatial features. The resulting images were used to obtain an unsupervised classification of relief units. Topographic variables (declivity, altitude, relief range and slope length) were used to identify the true relief units existing on the ground. The LANDSAT over pass data show that digital processing is highly affected by illumination geometry, and there is no correspondence between relief units as defined by spectral features and those resulting from topographic features.

  18. Shot Noise Thermometry down to 10 mK

    NASA Astrophysics Data System (ADS)

    Spietz, Lafe; Schoelkopf, Robert

    2007-03-01

    We report measurements of the Shot Noise Thermometer (SNT), a primary thermometer based on the electronic noise from a tunnel junction, in the range from 10 mK to 200 mK. We demonstrate operation of the SNT down to 10 mK with 10% accuracy at the lowest measured temperature. At 10 mK, where for a measurement frequency of f=450 MHz, hf=2.5kBT, we demonstrate that, provided that quantum corrections are taken into account, the SNT continues to be a practical thermometer. We also show that self-heating is not a measurable problem and demonstrate a simplified readout of the SNT.

  19. Sequential digital elevation models of active lava flows from ground-based stereo time-lapse imagery

    NASA Astrophysics Data System (ADS)

    James, M. R.; Robson, S.

    2014-11-01

    We describe a framework for deriving sequences of digital elevation models (DEMs) for the analysis of active lava flows using oblique stereo-pair time-lapse imagery. A photo-based technique was favoured over laser-based alternatives due to low equipment cost, high portability and capability for network expansion, with images of advancing flows captured by digital SLR cameras over durations of up to several hours. However, under typical field scale scenarios, relative camera orientations cannot be rigidly maintained (e.g. through the use of a stereo bar), preventing the use of standard stereo time-lapse processing software. Thus, we trial semi-automated DEM-sequence workflows capable of handling the small camera motions, variable image quality and restricted photogrammetric control that result from the practicalities of data collection at remote and hazardous sites. The image processing workflows implemented either link separate close-range photogrammetry and traditional stereo-matching software, or are integrated in a single software package based on structure-from-motion (SfM). We apply these techniques in contrasting case studies from Kilauea volcano, Hawaii and Mount Etna, Sicily, which differ in scale, duration and image texture. On Kilauea, the advance direction of thin fluid lava lobes was difficult to forecast, preventing good distribution of control. Consequently, volume changes calculated through the different workflows differed by ∼10% for DEMs (over ∼30 m2) that were captured once a minute for 37 min. On Mt. Etna, more predictable advance (∼3 m h-1 for ∼3 h) of a thicker, more viscous lava allowed robust control to be deployed and volumetric change results were generally within 5% (over ∼500 m2). Overall, the integrated SfM software was more straightforward to use and, under favourable conditions, produced results comparable to those from the close-range photogrammetry pipeline. However, under conditions with limited options for photogrammetric

  20. Accuracy assessment of airborne photogrammetrically derived high-resolution digital elevation models in a high mountain environment

    NASA Astrophysics Data System (ADS)

    Müller, Johann; Gärtner-Roer, Isabelle; Thee, Patrick; Ginzler, Christian

    2014-12-01

    High-resolution digital elevation models (DEMs) generated by airborne remote sensing are frequently used to analyze landform structures (monotemporal) and geomorphological processes (multitemporal) in remote areas or areas of extreme terrain. In order to assess and quantify such structures and processes it is necessary to know the absolute accuracy of the available DEMs. This study assesses the absolute vertical accuracy of DEMs generated by the High Resolution Stereo Camera-Airborne (HRSC-A), the Leica Airborne Digital Sensors 40/80 (ADS40 and ADS80) and the analogue camera system RC30. The study area is located in the Turtmann valley, Valais, Switzerland, a glacially and periglacially formed hanging valley stretching from 2400 m to 3300 m a.s.l. The photogrammetrically derived DEMs are evaluated against geodetic field measurements and an airborne laser scan (ALS). Traditional and robust global and local accuracy measurements are used to describe the vertical quality of the DEMs, which show a non Gaussian distribution of errors. The results show that all four sensor systems produce DEMs with similar accuracy despite their different setups and generations. The ADS40 and ADS80 (both with a ground sampling distance of 0.50 m) generate the most accurate DEMs in complex high mountain areas with a RMSE of 0.8 m and NMAD of 0.6 m They also show the highest accuracy relating to flying height (0.14‰). The pushbroom scanning system HRSC-A produces a RMSE of 1.03 m and a NMAD of 0.83 m (0.21‰ accuracy of the flying height and 10 times the ground sampling distance). The analogue camera system RC30 produces DEMs with a vertical accuracy of 1.30 m RMSE and 0.83 m NMAD (0.17‰ accuracy of the flying height and two times the ground sampling distance). It is also shown that the performance of the DEMs strongly depends on the inclination of the terrain. The RMSE of areas up to an inclination <40° is better than 1 m. In more inclined areas the error and outlier occurrence

  1. Shot noise thermometry down to 10 mK

    NASA Astrophysics Data System (ADS)

    Spietz, Lafe; Schoelkopf, R. J.; Pari, Patrick

    2006-10-01

    The authors report measurements of the shot noise thermometer (SNT), a primary thermometer based on the electronic noise from a tunnel junction, in the range from 10to200mK. They demonstrate operation of the SNT down to 10mK with 10% accuracy at the lowest measured temperature. At 10mK, where for a measurement frequency of f =450MHz, hf =2.5kBT, the authors demonstrate that provided that quantum corrections are taken into account, the SNT continues to be a practical thermometer. They also show that self-heating is not a measurable problem and demonstrate a simplified readout of the SNT.

  2. A Combined SRTM Digital Elevation Model for Zanjan State of Iran Based on the Corrective Surface Idea

    NASA Astrophysics Data System (ADS)

    Kiamehr, Ramin

    2016-04-01

    One arc-second high resolution version of the SRTM model recently published for the Iran by the US Geological Survey database. Digital Elevation Models (DEM) is widely used in different disciplines and applications by geoscientist. It is an essential data in geoid computation procedure, e.g., to determine the topographic, downward continuation (DWC) and atmospheric corrections. Also, it can be used in road location and design in civil engineering and hydrological analysis. However, a DEM is only a model of the elevation surface and it is subject to errors. The most important parts of errors could be comes from the bias in height datum. On the other hand, the accuracy of DEM is usually published in global sense and it is important to have estimation about the accuracy in the area of interest before using of it. One of the best methods to have a reasonable indication about the accuracy of DEM is obtained from the comparison of their height versus the precise national GPS/levelling data. It can be done by the determination of the Root-Mean-Square (RMS) of fitting between the DEM and leveling heights. The errors in the DEM can be approximated by different kinds of functions in order to fit the DEMs to a set of GPS/levelling data using the least squares adjustment. In the current study, several models ranging from a simple linear regression to seven parameter similarity transformation model are used in fitting procedure. However, the seven parameter model gives the best fitting with minimum standard division in all selected DEMs in the study area. Based on the 35 precise GPS/levelling data we obtain a RMS of 7 parameter fitting for SRTM DEM 5.5 m, The corrective surface model in generated based on the transformation parameters and included to the original SRTM model. The result of fitting in combined model is estimated again by independent GPS/leveling data. The result shows great improvement in absolute accuracy of the model with the standard deviation of 3.4 meter.

  3. Monitoring fine-sediment volume in the Colorado River ecosystem, Arizona: construction and analysis of digital elevation models

    USGS Publications Warehouse

    Kaplinski, Matt; Hazel, Joseph E.; Grams, Paul E.; Davis, Philip A.

    2014-01-01

    Digital elevation models (DEMs) of eleven 2–5 kilometer reaches of the Colorado River ecosystem (CRE) in Grand Canyon were constructed from repeat bathymetric and topographic surveys collected between August 2000 and December 2004. The DEMs will be used by researchers to study the effects of Glen Canyon Dam (GCD) operations on the sediment resources of the CRE in Grand Canyon by quantifying morphological changes and sediment transfer within and among the study reaches. Airborne surveys collected light detection and ranging (lidar) and photogrammetric data, whereas ground topographic and bathymetric data were collected simultaneously on river trips. Surveys were conducted in August 2000, September 2000, May 2002, May 2004, November 2004, and December 2004. The aerial lidar and photogrammetric data were merged with the ground topographic and bathymetric data to create DEMs of the study areas with a grid resolution of 1 meter. For each survey period, the vertical component of uncertainty (specifically, reproducibility or precision) was estimated for each data type (lidar/photogrammetry, ground surveys, bathymetry) and for two different types of bed-surface texture (smooth and rough). The resulting DEMs from this study are a valuable contribution to ongoing efforts in assessing the effects of GCD operations on the CRE. The DEMs can be used to map the spatial characteristics of geomorphic change within the study reaches and to estimate sediment budgets for different time periods by calculating the difference in sediment volume between surveys. In addition, the DEMs provide essential boundary conditions for numerical models of sediment transport and deposition, as well as help define the spatial distribution of habitat for fisheries investigations.

  4. Digital elevation models in 10 minute time steps - a status report on 4D monitoring of an active erosional scar

    NASA Astrophysics Data System (ADS)

    Kaiser, Andreas; Neugirg, Fabian; Hass, Erik; Jose, Steffen; Haas, Florian; Schmidt, Jürgen

    2016-04-01

    In erosional research a variety of processes are well understood and have been mimicked under laboratory conditions. In complex natural systems such as Alpine environments a multitude of influencing factors tend to superimpose single processes in a mixed signal which impedes a reliable interpretation. These mixed signals can already be captured by geoscientific research approaches such as sediment collectors, erosion pins or remote sensing surveys. Nevertheless, they fail to distinguish between single processes and their individual impact on slope morphology. Throughout the last two years a highly active slope of unsorted glacial deposits in the northern Alps has been monitored by repeated terrestrial laser scans roughly every three months. Resulting high resolution digital elevation models of difference were produced to identify possible seasonal patterns. By reproducing the TLS results with a physically based erosion model (EROSION 3D) ran with in situ input data from rainfall simulations and a climate station a better understanding of individual mechanism could be achieved. However, the already elaborate combination of soil science and close range remote sensing could not answer all questions concerning the slopes behaviour, especially not for freeze and thaw cycles and the winter period. Therefore, an array of three fully automatic synchronised cameras was setup to generate continuous 3D surface models. Among the main challenges faced for the system were the energy supply and durability, perspectives of the cameras to avoid shadowing and to guarantee sufficient overlap, a certain robustness to withstand rough alpine weather conditions, the scaling of each 3D model by tracked ground control points and the automatic data handling. First results show individual processes sculpting the slope's morphology but further work is required to improve automatic point cloud creation and change monitoring.

  5. An approach of crater automatic recognition based on contour digital elevation model from Chang'E Missions

    NASA Astrophysics Data System (ADS)

    Zuo, W.; Li, C.; Zhang, Z.; Li, H.; Feng, J.

    2015-12-01

    In order to provide fundamental information for exploration and related scientific research on the Moon and other planets, we propose a new automatic method to recognize craters on the lunar surface based on contour data extracted from a digital elevation model (DEM). First, we mapped 16-bits DEM to 256 gray scales for data compression, then for the purposes of better visualization, the grayscale is converted into RGB image. After that, a median filter is applied twice to DEM for data optimization, which produced smooth, continuous outlines for subsequent construction of contour plane. Considering the fact that the morphology of crater on contour plane can be approximately expressed as an ellipse or circle, we extract the outer boundaries of contour plane with the same color(gray value) as targets for further identification though a 8- neighborhood counterclockwise searching method. Then, A library of training samples is constructed based on above targets calculated from some sample DEM data, from which real crater targets are labeled as positive samples manually, and non-crater objects are labeled as negative ones. Some morphological feathers are calculated for all these samples, which are major axis (L), circumference(C), area inside the boundary(S), and radius of the largest inscribed circle(R). We use R/L, R/S, C/L, C/S, R/C, S/L as the key factors for identifying craters, and apply Fisher discrimination method on the sample library to calculate the weight of each factor and determine the discrimination formula, which is then applied to DEM data for identifying lunar craters. The method has been tested and verified with DEM data from CE-1 and CE-2, showing strong recognition ability and robustness and is applicable for the recognition of craters with various diameters and significant morphological differences, making fast and accurate automatic crater recognition possible.

  6. Projection of Stabilized Aerial Imagery Onto Digital Elevation Maps for Geo-Rectified and Jitter-Free Viewing

    NASA Technical Reports Server (NTRS)

    Ansar, Adnan I.; Brennan, Shane; Clouse, Daniel S.

    2012-01-01

    As imagery is collected from an airborne platform, an individual viewing the images wants to know from where on the Earth the images were collected. To do this, some information about the camera needs to be known, such as its position and orientation relative to the Earth. This can be provided by common inertial navigation systems (INS). Once the location of the camera is known, it is useful to project an image onto some representation of the Earth. Due to the non-smooth terrain of the Earth (mountains, valleys, etc.), this projection is highly non-linear. Thus, to ensure accurate projection, one needs to project onto a digital elevation map (DEM). This allows one to view the images overlaid onto a representation of the Earth. A code has been developed that takes an image, a model of the camera used to acquire that image, the pose of the camera during acquisition (as provided by an INS), and a DEM, and outputs an image that has been geo-rectified. The world coordinate of the bounds of the image are provided for viewing purposes. The code finds a mapping from points on the ground (DEM) to pixels in the image. By performing this process for all points on the ground, one can "paint" the ground with the image, effectively performing a projection of the image onto the ground. In order to make this process efficient, a method was developed for finding a region of interest (ROI) on the ground to where the image will project. This code is useful in any scenario involving an aerial imaging platform that moves and rotates over time. Many other applications are possible in processing aerial and satellite imagery.

  7. A multi-directional and multi-scale roughness filter to detect lineament segments on digital elevation models - analyzing spatial objects in R

    NASA Astrophysics Data System (ADS)

    Baumann, Sebastian; Robl, Jörg; Wendt, Lorenz; Willingshofer, Ernst; Hilberg, Sylke

    2016-04-01

    Automated lineament analysis on remotely sensed data requires two general process steps: The identification of neighboring pixels showing high contrast and the conversion of these domains into lines. The target output is the lineaments' position, extent and orientation. We developed a lineament extraction tool programmed in R using digital elevation models as input data to generate morphological lineaments defined as follows: A morphological lineament represents a zone of high relief roughness, whose length significantly exceeds the width. As relief roughness any deviation from a flat plane, defined by a roughness threshold, is considered. In our novel approach a multi-directional and multi-scale roughness filter uses moving windows of different neighborhood sizes to identify threshold limited rough domains on digital elevation models. Surface roughness is calculated as the vertical elevation difference between the center cell and the different orientated straight lines connecting two edge cells of a neighborhood, divided by the horizontal distance of the edge cells. Thus multiple roughness values depending on the neighborhood sizes and orientations of the edge connecting lines are generated for each cell and their maximum and minimum values are extracted. Thereby negative signs of the roughness parameter represent concave relief structures as valleys, positive signs convex relief structures as ridges. A threshold defines domains of high relief roughness. These domains are thinned to a representative point pattern by a 3x3 neighborhood filter, highlighting maximum and minimum roughness peaks, and representing the center points of lineament segments. The orientation and extent of the lineament segments are calculated within the roughness domains, generating a straight line segment in the direction of least roughness differences. We tested our algorithm on digital elevation models of multiple sources and scales and compared the results visually with shaded relief map

  8. Use of Digital Elevation Models to understand map landforms and history of the magmatism Khibiny Massif (Kola Peninsula, Russia)

    NASA Astrophysics Data System (ADS)

    Chesalova, Elena; Asavin, Alex

    2016-04-01

    This work presents an improved geomorphological methodology that uses 3D model of relief, remotely-sensed data, geological, geophysical maps and tools of Geographical Information Systems. On the basis of maps of 1: 50,000 and 1: 200,000 the Digital Elevation model (DEM) of Khibiny massif was developed. We used software ARC / INFO v10.2 ESRI. A DEM was used for analyzing landform by extracting the slope gradient, curvature, valley pro?les, slope, aspect and so on. The results were gradually re?ned from the interpretation of satellite imagery and geological map Geomorphological analysis will allow us to determine spatial regularities in inner massive construction. We try to found areas where gas emissions (CH4/H2) enrich, according to morphometry, geology, tectonic and other environments. The main regional blocks were de?ned by different morphological evidences: impression zone, similar to subsidence caldera; uplift zone, domed area (located in the highest part of massif and zone of intersection of main faults) and others. It says that there are the few stages in the development of the Khibiny massif. There is no common concept of the consequence of intrudes magmatic phases now. And we hope that our geomorphical analysis take a new evidences about this problems. Locations of the blocks' borders (tectonic zones) were recognized by lineament analysis of valleys and tectonic faults presented in relief. Erosion system is represented by valleys of 4 ranks. It inherits the zone of tectonic disturbances 3 groups of faults were recognized: 1) Global lineament system cross whole peninsula - existing before Khibiny massif intrusion; 2) Faults associated with the formation of the intrusive phases sequence and magma differentiation and with later collision history during magma cooling; 3) Crack system related to neotectonic process. We believed that if different magmatic phases intrude in similar tectonic environment, the common spatial system of faults will be formed. Really we

  9. Demonstration of a 10-m Solar Sail System

    NASA Technical Reports Server (NTRS)

    Murphy, David M.; Macy, Brian D.; Gaspar, James L.

    2004-01-01

    The NASA In-Space Propulsion (ISP) program has been sponsoring system design development and hardware demonstration activities of solar sail technology over the past 16 months. Efforts to validate by test a moderate-scale (10-m) 1/4 symmetry ground demonstration sail system are nearly complete. Results of testing and analytical model validation of component and assembly functional, strength, stiffness, shape, and dynamic behavior are discussed.

  10. 10-m platform array telescope design for the AMIBA project

    NASA Astrophysics Data System (ADS)

    Martin, Robert N.; Kingsley, Jeffrey S.

    2000-07-01

    We present a unique hexapod platform array for the new Taiwanese AMIBA project. AMIBA is a 90 GHz radio interferometric array consisting of 19 elements mounted on a roughly 10 m diameter platform. A hexapod mount is used to steer this platform. The resulting design is lightweight in comparison to a more conventional mount. The design goals of pointing stability, platform accuracy and reduced cost can be met with this design. A metrology system for pointing is proposed for inclusion in the design.

  11. A critical source area phosphorus index with topographic transport factors using high resolution LiDAR digital elevation models

    NASA Astrophysics Data System (ADS)

    Thomas, Ian; Murphy, Paul; Fenton, Owen; Shine, Oliver; Mellander, Per-Erik; Dunlop, Paul; Jordan, Phil

    2015-04-01

    A new phosphorus index (PI) tool is presented which aims to improve the identification of critical source areas (CSAs) of phosphorus (P) losses from agricultural land to surface waters. In a novel approach, the PI incorporates topographic indices rather than watercourse proximity as proxies for runoff risk, to account for the dominant control of topography on runoff-generating areas and P transport pathways. Runoff propensity and hydrological connectivity are modelled using the Topographic Wetness Index (TWI) and Network Index (NI) respectively, utilising high resolution digital elevation models (DEMs) derived from Light Detection and Ranging (LiDAR) to capture the influence of micro-topographic features on runoff pathways. Additionally, the PI attempts to improve risk estimates of particulate P losses by incorporating an erosion factor that accounts for fine-scale topographic variability within fields. Erosion risk is modelled using the Unit Stream Power Erosion Deposition (USPED) model, which integrates DEM-derived upslope contributing area and Universal Soil Loss Equation (USLE) factors. The PI was developed using field, sub-field and sub-catchment scale datasets of P source, mobilisation and transport factors, for four intensive agricultural catchments in Ireland representing different agri-environmental conditions. Datasets included soil test P concentrations, degree of P saturation, soil attributes, land use, artificial subsurface drainage locations, and 2 m resolution LiDAR DEMs resampled from 0.25 m resolution data. All factor datasets were integrated within a Geographical Information System (GIS) and rasterised to 2 m resolution. For each factor, values were categorised and assigned relative risk scores which ranked P loss potential. Total risk scores were calculated for each grid cell using a component formulation, which summed the products of weighted factor risk scores for runoff and erosion pathways. Results showed that the new PI was able to predict

  12. Testing Pixel Translation Digital Elevation Models to Reconstruct Slip Histories: An Example from the Agua Blanca Fault, Baja California, Mexico

    NASA Astrophysics Data System (ADS)

    Wilson, J.; Wetmore, P. H.; Malservisi, R.; Ferwerda, B. P.; Teran, O.

    2012-12-01

    We use recently collected slip vector and total offset data from the Agua Blanca fault (ABF) to constrain a pixel translation digital elevation model (DEM) to reconstruct the slip history of this fault. This model was constructed using a Perl script that reads a DEM file (Easting, Northing, Elevation) and a configuration file with coordinates that define the boundary of each fault segment. A pixel translation vector is defined as a magnitude of lateral offset in an azimuthal direction. The program translates pixels north of the fault and prints their pre-faulting position to a new DEM file that can be gridded and displayed. This analysis, where multiple DEMs are created with different translation vectors, allows us to identify areas of transtension or transpression while seeing the topographic expression in these areas. The benefit of this technique, in contrast to a simple block model, is that the DEM gives us a valuable graphic which can be used to pose new research questions. We have found that many topographic features correlate across the fault, i.e. valleys and ridges, which likely have implications for the age of the ABF, long term landscape evolution rates, and potentially provide conformation for total slip assessments The ABF of northern Baja California, Mexico is an active, dextral strike slip fault that transfers Pacific-North American plate boundary strain out of the Gulf of California and around the "Big Bend" of the San Andreas Fault. Total displacement on the ABF in the central and eastern parts of the fault is 10 +/- 2 km based on offset Early-Cretaceous features such as terrane boundaries and intrusive bodies (plutons and dike swarms). Where the fault bifurcates to the west, the northern strand (northern Agua Blanca fault or NABF) is constrained to 7 +/- 1 km. We have not yet identified piercing points on the southern strand, the Santo Tomas fault (STF), but displacement is inferred to be ~4 km assuming that the sum of slip on the NABF and STF is

  13. Analysis of vertical dispersion and relative concentration of an elevated plume in the tropical boundary layer using video digitization

    NASA Astrophysics Data System (ADS)

    Templeman, B.; Raman, S.; Templeman, S.; Nigam, S.; Singh, M. P.

    Digital analysis of smoke plume imagery is applied to video and photographs of a smoke plume taken on 22 June 1987 at the Badrapur Power Plant in New Delhi, India. Using a medium resolution video digitizer, these photographs and video are digitized and analyzed to produce a composite averaged plume that corresponds to a sampling interval of 2 min. These estimates are then used to estimate parameters of vertical dispersion and relative centerline concentration. Estimates of vertical dispersion are compared with Briggs' recommended values for stability class C (slightly unstable conditions). The digital technique produces values of σz that compare well with those estimated using Briggs' formulations. The values obtained using the digital method did not vary by more than 5 per cent from those formulated by Briggs. Estimates of relative concentration, which are values normalized by the concentration associated with a travel distance of 100 m, are compared with relative concentrations obtained using the Gaussian diffusion equation. The digital method produces estimates of relative concentration that compare well with the Gaussian diffusion equation, the differences encountered varying by less than 10 per cent throughout the calculated travel distance.

  14. Use of Digital Elevation Models to understand map landforms and history of the magmatism Khibiny Massif (Kola Peninsula, Russia)

    NASA Astrophysics Data System (ADS)

    Chesalova, Elena; Asavin, Alex

    2016-04-01

    This work presents an improved geomorphological methodology that uses 3D model of relief, remotely-sensed data, geological, geophysical maps and tools of Geographical Information Systems. On the basis of maps of 1: 50,000 and 1: 200,000 the Digital Elevation model (DEM) of Khibiny massif was developed. We used software ARC / INFO v10.2 ESRI. A DEM was used for analyzing landform by extracting the slope gradient, curvature, valley pro?les, slope, aspect and so on. The results were gradually re?ned from the interpretation of satellite imagery and geological map Geomorphological analysis will allow us to determine spatial regularities in inner massive construction. We try to found areas where gas emissions (CH4/H2) enrich, according to morphometry, geology, tectonic and other environments. The main regional blocks were de?ned by different morphological evidences: impression zone, similar to subsidence caldera; uplift zone, domed area (located in the highest part of massif and zone of intersection of main faults) and others. It says that there are the few stages in the development of the Khibiny massif. There is no common concept of the consequence of intrudes magmatic phases now. And we hope that our geomorphical analysis take a new evidences about this problems. Locations of the blocks' borders (tectonic zones) were recognized by lineament analysis of valleys and tectonic faults presented in relief. Erosion system is represented by valleys of 4 ranks. It inherits the zone of tectonic disturbances 3 groups of faults were recognized: 1) Global lineament system cross whole peninsula - existing before Khibiny massif intrusion; 2) Faults associated with the formation of the intrusive phases sequence and magma differentiation and with later collision history during magma cooling; 3) Crack system related to neotectonic process. We believed that if different magmatic phases intrude in similar tectonic environment, the common spatial system of faults will be formed. Really we

  15. Landscape unit based digital elevation model development for the freshwater wetlands within the Arthur C. Marshall Loxahatchee National Wildlife Refuge, Southeastern Florida

    USGS Publications Warehouse

    Xie, Zhixiao; Liu, Zhongwei; Jones, John W.; Higer, Aaron L.; Telis, Pamela A.

    2011-01-01

    The hydrologic regime is a critical limiting factor in the delicate ecosystem of the greater Everglades freshwater wetlands in south Florida that has been severely altered by management activities in the past several decades. "Getting the water right" is regarded as the key to successful restoration of this unique wetland ecosystem. An essential component to represent and model its hydrologic regime, specifically water depth, is an accurate ground Digital Elevation Model (DEM). The Everglades Depth Estimation Network (EDEN) supplies important hydrologic data, and its products (including a ground DEM) have been well received by scientists and resource managers involved in Everglades restoration. This study improves the EDEN DEMs of the Loxahatchee National Wildlife Refuge, also known as Water Conservation Area 1 (WCA1), by adopting a landscape unit (LU) based interpolation approach. The study first filtered the input elevation data based on newly available vegetation data, and then created a separate geostatistical model (universal kriging) for each LU. The resultant DEMs have encouraging cross-validation and validation results, especially since the validation is based on an independent elevation dataset (derived by subtracting water depth measurements from EDEN water surface elevations). The DEM product of this study will directly benefit hydrologic and ecological studies as well as restoration efforts. The study will also be valuable for a broad range of wetland studies.

  16. Mapping mine wastes and analyzing areas affected by selenium-rich water runoff in southeast Idaho using AVIRIS imagery and digital elevation data

    USGS Publications Warehouse

    Mars, J.C.; Crowley, J.K.

    2003-01-01

    Remotely sensed hyperspectral and digital elevation data from southeastern Idaho are combined in a new method to assess mine waste contamination. Waste rock from phosphorite mining in the area contains selenium, cadmium, vanadium, and other metals. Toxic concentrations of selenium have been found in plants and soils near some mine waste dumps. Eighteen mine waste dumps and five vegetation cover types in the southeast Idaho phosphate district were mapped by using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) imagery and field data. The interaction of surface water runoff with mine waste was assessed by registering the AVIRIS results to digital elevation data, enabling determinations of (1) mine dump morphologies, (2) catchment watershed areas above each mine dump, (3) flow directions from the dumps, (4) stream gradients, and (5) the extent of downstream wetlands available for selenium absorption. Watersheds with the most severe selenium contamination, such as the South Maybe Canyon watershed, are associated with mine dumps that have large catchment watershed areas, high stream gradients, a paucity of downstream wetlands, and dump forms that tend to obstruct stream flow. Watersheds associated with low concentrations of dissolved selenium, such as Angus Creek, have mine dumps with small catchment watershed areas, low stream gradients, abundant wetlands vegetation, and less obstructing dump morphologies. ?? 2002 Elsevier Science Inc. All rights reserved.

  17. Long-term stability of peneplains and landscape evolution in southern Tibet inferred from field data, cosmogenic nuclides, and digital elevation models

    NASA Astrophysics Data System (ADS)

    Strobl, M.; Hetzel, R.; Ding, L.; Zhang, L.

    2010-05-01

    Peneplains constitute a widespread and well developed geomorphic element on the Tibetan Plateau, nevertheless little is known about their formation and the subsequent landscape evolution. In southern Tibet, north of Nam Co (~31° 20'N, 90° E), a particularly well-preserved peneplain occurs at an elevation of ~5350 m in Cretaceous granitoids. The main planation surface has been incised by small streams that formed additional small low-relief surfaces at lower elevations. Fluvial incision of the main peneplain has generated a local relief of up to ~700 m. The progressive incision has led to hillslope gradients that increase with decreasing elevation, i.e. from the main peneplain at ~5350 m down to the current base level at ~4650 m, as revealed by field observations and the analysis of digital elevation model. In order to quantify the landscape evolution of the peneplain region we determined local and catchment-wide erosion rates from the concentration of in situ-produced cosmogenic 10Be. Local erosion rates on the main peneplain and the low-relief bedrock surfaces at lower elevation range from 6 to 12 m Ma-1 and indicate that the geomorphic surfaces are stable over long periods of time. Spatially integrated erosion rates of small river systems that are incising and eroding headwards into the main peneplain are only slightly higher and range from 11 to 18 m Ma-1. Even if river incision has proceeded at a rate that is 2-4 times higher than the catchment-wide erosion rates, i.e. at 30 to 60 m Ma-1, it would take about 10 to 20 Ma to generate the local relief of ~700 m observed today. This demonstrates that the major peneplain is a very stable geomorphic element with a minimum age of 10 to 20 Ma and that the landscape in the region has barely been modified by erosion in the last millions of years.

  18. A semi-automated tool for reducing the creation of false closed depressions from a filled LIDAR-derived digital elevation model

    USGS Publications Warehouse

    Waller, John S.; Doctor, Daniel H.; Terziotti, Silvia

    2015-01-01

    Closed depressions on the land surface can be identified by ‘filling’ a digital elevation model (DEM) and subtracting the filled model from the original DEM. However, automated methods suffer from artificial ‘dams’ where surface streams cross under bridges and through culverts. Removal of these false depressions from an elevation model is difficult due to the lack of bridge and culvert inventories; thus, another method is needed to breach these artificial dams. Here, we present a semi-automated workflow and toolbox to remove falsely detected closed depressions created by artificial dams in a DEM. The approach finds the intersections between transportation routes (e.g., roads) and streams, and then lowers the elevation surface across the roads to stream level allowing flow to be routed under the road. Once the surface is corrected to match the approximate location of the National Hydrologic Dataset stream lines, the procedure is repeated with sequentially smaller flow accumulation thresholds in order to generate stream lines with less contributing area within the watershed. Through multiple iterations, artificial depressions that may arise due to ephemeral flow paths can also be removed. Preliminary results reveal that this new technique provides significant improvements for flow routing across a DEM and minimizes artifacts within the elevation surface. Slight changes in the stream flow lines generally improve the quality of flow routes; however some artificial dams may persist. Problematic areas include extensive road ditches, particularly along divided highways, and where surface flow crosses beneath road intersections. Limitations do exist, and the results partially depend on the quality of data being input. Of 166 manually identified culverts from a previous study by Doctor and Young in 2013, 125 are within 25 m of culverts identified by this tool. After three iterations, 1,735 culverts were identified and cataloged. The result is a reconditioned

  19. Digital elevations and extents of regional hydrogeologic units in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to North Carolina

    USGS Publications Warehouse

    Pope, Jason P.; Andreasen, David C.; Mcfarland, E. Randolph; Watt, Martha K.

    2016-08-31

    Digital geospatial datasets of the extents and top elevations of the regional hydrogeologic units of the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to northeastern North Carolina were developed to provide an updated hydrogeologic framework to support analysis of groundwater resources. The 19 regional hydrogeologic units were delineated by elevation grids and extent polygons for 20 layers: the land and bathymetric surface at the top of the unconfined surficial aquifer, the upper surfaces of 9 confined aquifers and 9 confining units, and the bedrock surface that defines the base of all Northern Atlantic Coastal Plain sediments. The delineation of the regional hydrogeologic units relied on the interpretive work from source reports for New York, New Jersey, Delaware and Maryland, Virginia, and North Carolina rather than from re-analysis of fundamental hydrogeologic data. This model of regional hydrogeologic unit geometries represents interpolation, extrapolation, and generalization of the earlier interpretive work. Regional units were constructed from available digital data layers from the source studies in order to extend units consistently across political boundaries and approximate units in offshore areas.Though many of the Northern Atlantic Coastal Plain hydrogeologic units may extend eastward as far as the edge of the Atlantic Continental Shelf, the modeled boundaries of all regional hydrogeologic units in this study were clipped to an area approximately defined by the furthest offshore extent of fresh to brackish water in any part of the aquifer system, as indicated by chloride concentrations of 10,000 milligrams per liter. Elevations and extents of units that do not exist onshore in Long Island, New York, were not included north of New Jersey. Hydrogeologic units in North Carolina were included primarily to provide continuity across the Virginia-North Carolina State boundary, which was important for defining the southern edge of

  20. Generating nested wetland catchments with readily-available digital elevation data may improve evaluations of land-use change on wetlands

    USGS Publications Warehouse

    McCauley, Lisa A.; Anteau, Michael J.

    2014-01-01

    The important ecosystem functions wetlands perform are influenced by land-use changes in their surrounding uplands and thus, identifying the upland area that flows into a wetland is important. We provide a method to define wetland catchments as the portion of the landscape that flows into a wetland; we allowed catchments to be nested and include other wetlands and their catchments, forming a hydrologic wetland complex. We generated catchments using multiple sources and resolutions of digital elevation data to evaluate whether catchment sizes generated from those data were similar. While non-contributing areas, or sinks, differed between elevation data sets, catchment areas were similar among high-resolution LiDAR- and IfSAR-derived data and readily available lower resolution data from the National Elevation Dataset. Accordingly, the higher-resolution DEM data, which may be expensive or not available, will not likely yield more accurate wetland catchment boundaries in flat or glaciated landscapes. We contend that this method to generate wetland catchments can be used to improve wetland studies where the location of a wetland within a catchment is important. Furthermore, the size of the catchment is important for understanding how wetlands respond to climate, land-use practices, and contamination.

  1. State of Florida 1:24,000- and 1:100,000-scale Quadrangle Index Map - Highlighting Low-Lying Areas Derived from USGS Digital Elevation Models

    USGS Publications Warehouse

    Kosovich, John J.

    2008-01-01

    In support of U.S. Geological Survey (USGS) disaster preparedness efforts, this map depicts 1:24,000- and 1:100,000-scale quadrangle footprints over a color shaded relief representation of the State of Florida. The first 30 feet of relief above mean sea level are displayed as brightly colored 5-foot elevation bands, which highlight low-elevation areas at a coarse spatial resolution. Standard USGS National Elevation Dataset (NED) 1 arc-second (nominally 30-meter) digital elevation model (DEM) data are the basis for the map, which is designed to be used at a broad scale and for informational purposes only. The NED source data for this map consists of a mixture of 30-meter- and 10-meter-resolution DEMs. The NED data were derived from the original 1:24,000-scale USGS topographic map bare-earth contours, which were converted into gridded quadrangle-based DEM tiles at a constant post spacing (grid cell size) of either 30 meters (data before the mid-1990s) or 10 meters (mid-1990s and later data). These individual-quadrangle DEMs were then converted to spherical coordinates (latitude/longitude decimal degrees) and edge-matched to ensure seamlessness. Figure 1 shows a similar representation for the entire U.S. Gulf Coast, using coarsened 30-meter NED data. Areas below sea level typically are surrounded by levees or some other type of flood-control structures. State and county boundary, hydrography, city, and road layers were modified from USGS National Atlas data downloaded in 2003. Quadrangle names, dated April, 2006, were obtained from the Federal Geographic Names Information System. The NED data were downloaded in 2004.

  2. Exploring the relationship between hydrologic parameters and nutrient loads using digital elevation model and GIS - a case study from Sugarcreek headwaters, Ohio, U.S.A.

    PubMed

    Prasad, V Krishna; Ortiz, Ariel; Stinner, Ben; McCartney, David; Parker, Jason; Hudgins, Deana; Hoy, Casey; Moore, Richard

    2005-11-01

    Ohio is typical among the Midwestern and Eastern United States with high levels of water pollutants, the main sources being from agriculture. In this study, we used a digital elevation model in conjunction with hydrological indices to determine the role of landscape complexity affecting the spatial and temporal variation in pollutant levels, in one of the most impaired headwater streams in Ohio. More than eighty five percent of the study area is dominated by agriculture. Spatial distribution of slope (S), altitude and wetness index along with other watershed parameters such as flow direction, flow accumulation, stream networks, flow stream orders and erosion index were used within a Geographic Information Systems framework to quantify variation in nitrate and phosphate loads to headwater streams. Stream monitoring data for nutrient loads were used to correlate the observed spatial and temporal patterns with hydrological parameters using multiple linear regressions. Results from the wetness index calculated from a digital elevation model suggested a range of 0.10-16.39, with more than 35% having values less than 4.0. A Revised Universal Soil Loss Equation (RUSLE) predicted soil loss in the range of 0.01-4.0 t/ha/yr. Nitrate nitrogen levels in the study area paralleled precipitation patterns over time, with higher nitrate levels corresponding to high precipitation. Atmospheric deposition through precipitation could explain approximately 35% of total nitrate levels observed in streams. Among the different topographic variables and hydrological indices, results from the step-wise multiple regression suggested the following best predictors, (1) elevation range and upstream flow length for nitrate, (2) flow direction and upstream flow length for ammonia-nitrogen and slope, and (3) elevation range for phosphate levels. Differences in the landscape models observed for nitrate, phosphate and ammonia-nitrogen in the surface waters were attributed partly to differences in the

  3. An automated, open-source pipeline for mass production of digital elevation models (DEMs) from very-high-resolution commercial stereo satellite imagery

    NASA Astrophysics Data System (ADS)

    Shean, David E.; Alexandrov, Oleg; Moratto, Zachary M.; Smith, Benjamin E.; Joughin, Ian R.; Porter, Claire; Morin, Paul

    2016-06-01

    We adapted the automated, open source NASA Ames Stereo Pipeline (ASP) to generate digital elevation models (DEMs) and orthoimages from very-high-resolution (VHR) commercial imagery of the Earth. These modifications include support for rigorous and rational polynomial coefficient (RPC) sensor models, sensor geometry correction, bundle adjustment, point cloud co-registration, and significant improvements to the ASP code base. We outline a processing workflow for ∼0.5 m ground sample distance (GSD) DigitalGlobe WorldView-1 and WorldView-2 along-track stereo image data, with an overview of ASP capabilities, an evaluation of ASP correlator options, benchmark test results, and two case studies of DEM accuracy. Output DEM products are posted at ∼2 m with direct geolocation accuracy of <5.0 m CE90/LE90. An automated iterative closest-point (ICP) co-registration tool reduces absolute vertical and horizontal error to <0.5 m where appropriate ground-control data are available, with observed standard deviation of ∼0.1-0.5 m for overlapping, co-registered DEMs (n = 14, 17). While ASP can be used to process individual stereo pairs on a local workstation, the methods presented here were developed for large-scale batch processing in a high-performance computing environment. We are leveraging these resources to produce dense time series and regional mosaics for the Earth's polar regions.

  4. Assessing the quality of Digital Elevation Models obtained from mini-Unmanned Aerial Vehicles for overland flow modelling in urban areas

    NASA Astrophysics Data System (ADS)

    Leitão, J. P.; Moy de Vitry, M.; Scheidegger, A.; Rieckermann, J.

    2015-06-01

    Precise and detailed Digital Elevation Models (DEMs) are essential to accurately predict overland flow in urban areas. Unfortunately, traditional sources of DEM remain a bottleneck for detailed and reliable overland flow models, because the resulting DEMs are too coarse to provide DEMs of sufficient detail to inform urban overland flows. Interestingly, technological developments of Unmanned Aerial Vehicles (UAVs) suggest that they have matured enough to be a competitive alternative to satellites or airplanes. However, this has not been tested so far. In this this study we therefore evaluated whether DEMs generated from UAV imagery are suitable for urban drainage overland flow modelling. Specifically, fourteen UAV flights were conducted to assess the influence of four different flight parameters on the quality of generated DEMs: (i) flight altitude, (ii) image overlapping, (iii) camera pitch and (iv) weather conditions. In addition, we compared the best quality UAV DEM to a conventional Light Detection and Ranging (LiDAR)-based DEM. To evaluate both the quality of the UAV DEMs and the comparison to LiDAR-based DEMs, we performed regression analysis on several qualitative and quantitative metrics, such as elevation accuracy, quality of object representation (e.g., buildings, walls and trees) in the DEM, which were specifically tailored to assess overland flow modelling performance, using the flight parameters as explanatory variables. Our results suggested that, first, as expected, flight altitude influenced the DEM quality most, where lower flights produce better DEMs; in a similar fashion, overcast weather conditions are preferable, but weather conditions and other factors influence DEM quality much less. Second, we found that for urban overland flow modelling, the UAV DEMs performed competitively in comparison to a traditional LiDAR-based DEM. An important advantage of using UAVs to generate DEMs in urban areas is their flexibility that enables more frequent

  5. Decadal region-wide and glacier-wide mass balances derived from multi-temporal ASTER satellite digital elevation models. Validation over the Mont-Blanc area

    NASA Astrophysics Data System (ADS)

    Berthier, Etienne; Cabot, Vincent; Vincent, Christian; Six, Delphine

    2016-06-01

    Since 2000, a vast archive of stereo-images has been built by the Advanced Spaceborne Thermal Emission and Reflection (ASTER) satellite. Several studies already extracted glacier mass balances from multi-temporal ASTER digital elevation models (DEMs) but they lacked accurate independent data for validation. Here, we apply a linear regression to a time series of 3D-coregistered ASTER DEMs to estimate the rate of surface elevation changes (dh/dtASTER) and geodetic mass balances of Mont-Blanc glaciers (155 km²) between 2000 and 2014. Validation using field and spaceborne geodetic measurements reveals large errors at the individual pixel level (> 1 m a-1) and an accuracy of 0.2-0.3 m a-1 for dh/dtASTER averaged over areas larger than 1 km². For all Mont-Blanc glaciers, the ASTER region-wide mass balance (-1.05±0.37 m water equivalent (w.e.) a-1) agrees remarkably with the one measured using Spot5 and Pléiades DEMs (-1.06±0.23 m w.e. a-1) over their common 2003-2012 period. This multi-temporal ASTER DEM strategy leads to smaller errors than the simple differencing of two ASTER DEMs. By extrapolating dh/dtASTER to mid-February 2000, we infer a mean penetration depth of about 9±3 m for the C-band Shuttle Radar Topographic Mission (SRTM) radar signal, with a strong altitudinal dependency (range 0-12 m). This methodology thus reveals the regional pattern of glacier surface elevation changes and improves our knowledge of the penetration of the radar signal into snow and ice.

  6. Optimization of the resolution of remotely sensed digital elevation model to facilitate the simulation and spatial propagation of flood events in flat areas

    NASA Astrophysics Data System (ADS)

    Karapetsas, Nikolaos; Skoulikaris, Charalampos; Katsogiannos, Fotis; Zalidis, George; Alexandridis, Thomas

    2013-04-01

    The use of satellite remote sensing products, such as Digital Elevation Models (DEMs), under specific computational interfaces of Geographic Information Systems (GIS) has fostered and facilitated the acquisition of data on specific hydrologic features, such as slope, flow direction and flow accumulation, which are crucial inputs to hydrology or hydraulic models at the river basin scale. However, even though DEMs of different resolution varying from a few km up to 20m are freely available for the European continent, these remotely sensed elevation data are rather coarse in cases where large flat areas are dominant inside a watershed, resulting in an unsatisfactory representation of the terrain characteristics. This scientific work aims at implementing a combing interpolation technique for the amelioration of the analysis of a DEM in order to be used as the input ground model to a hydraulic model for the assessment of potential flood events propagation in plains. More specifically, the second version of the ASTER Global Digital Elevation Model (GDEM2), which has an overall accuracy of around 20 meters, was interpolated with a vast number of aerial control points available from the Hellenic Mapping and Cadastral Organization (HMCO). The uncertainty that was inherent in both the available datasets (ASTER & HMCO) and the appearance of uncorrelated errors and artifacts was minimized by incorporating geostatistical filtering. The resolution of the produced DEM was approximately 10 meters and its validation was conducted with the use of an external dataset of 220 geodetic survey points. The derived DEM was then used as an input to the hydraulic model InfoWorks RS, whose operation is based on the relief characteristics contained in the ground model, for defining, in an automated way, the cross section parameters and simulating the flood spatial distribution. The plain of Serres, which is located in the downstream part of the Struma/Strymon transboundary river basin shared

  7. Measurement of post-eruptive deformation and depositional features from the 2009 Redoubt Volcanic Eruption using high-resolution digital elevation models

    NASA Astrophysics Data System (ADS)

    McAlpin, D. B.; Meyer, F.; Webley, P.

    2010-12-01

    We present a system to examine changes in volcanic morphology and topography using a new multi-sensor approach to produce high-resolution digital elevation models (DEMs), and measure post-eruption volcanic deformation and depositional features, including lava domes, lahars, and pyroclastic flow deposits. The developed system exploits available data sets that have not been previously subjected to systematic or fully coordinated use. By employing readily available space borne remote sensing data, resources are used in a manner that is routine in method, but of sufficient quality and availability to answer many important geophysical questions. The multi-sensor approach involves a mix of stereoscopic optical, interferometric radar, and thermal space borne imagery to generate DEMs and multi-sensor analyses of volcanic activity. Interferometric Synthetic Aperture Radar (InSAR) data originates from the European Remote Sensing (ERS)-2 / Envisat Advanced Synthetic Aperture Radar (ASAR) tandem campaign, whose setup allows DEM generation with sub-meter accuracy in flat to moderately hilly terrain. For areas not suitable for SAR analysis, accurate elevations are determined by photogrammetric analysis of high-resolution, stereoscopic optical data from the Japanese Aerospace Exploration Agency’s (JAXA’s) Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) carried by the Advanced Land-Observing Satellite (ALOS). The generated DEMs are associated with a time stamp and are stored in a database. The time annotation and elevation information of DEMs in volcanic areas that are subject to rapid and drastic topographic changes enable us to perform topographical correction of interferograms, with the appropriate elevation information. It also allows us to determine volume estimates of low-relief deposits such as lahars and other volcanic deposits along with their evolution over time. Higher relief features, such as volcanic domes, are similarly examined at a somewhat

  8. Digital Elevation Models of the Pre-Eruption 2000 Crater and 2004-07 Dome-Building Eruption at Mount St. Helens, Washington, USA

    USGS Publications Warehouse

    Messerich, J.A.; Schilling, S.P.; Thompson, R.A.

    2008-01-01

    Presented in this report are 27 digital elevation model (DEM) datasets for the crater area of Mount St. Helens. These datasets include pre-eruption baseline data collected in 2000, incremental model subsets collected during the 2004-07 dome building eruption, and associated shaded-relief image datasets. Each dataset was collected photogrammetrically with digital softcopy methods employing a combination of manual collection and iterative compilation of x,y,z coordinate triplets utilizing autocorrelation techniques. DEM data points collected using autocorrelation methods were rigorously edited in stereo and manually corrected to ensure conformity with the ground surface. Data were first collected as a triangulated irregular network (TIN) then interpolated to a grid format. DEM data are based on aerotriangulated photogrammetric solutions for aerial photograph strips flown at a nominal scale of 1:12,000 using a combination of surveyed ground control and photograph-identified control points. The 2000 DEM is based on aerotriangulation of four strips totaling 31 photographs. Subsequent DEMs collected during the course of the eruption are based on aerotriangulation of single aerial photograph strips consisting of between three and seven 1:12,000-scale photographs (two to six stereo pairs). Most datasets were based on three or four stereo pairs. Photogrammetric errors associated with each dataset are presented along with ground control used in the photogrammetric aerotriangulation. The temporal increase in area of deformation in the crater as a result of dome growth, deformation, and translation of glacial ice resulted in continual adoption of new ground control points and abandonment of others during the course of the eruption. Additionally, seasonal snow cover precluded the consistent use of some ground control points.

  9. Evaluating the Effects of Reductions in LiDAR Data on the Visual and Statistical Characteristics of the Created Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Asal, F. F.

    2016-06-01

    With continuous developments in LiDAR technologies high point cloud densities have been attainable but accompanied by challenges for processing big volumes of data. Reductions in high point cloud densities are expected to lower data acquisition and data processing costs; however this could affect the characteristics of the generated Digital Elevation Models (DEMs). This research aimed to evaluate the effects of reductions in airborne LiDAR point cloud data densities on the visual and statistical characteristics of the generated DEMs. DEMs have been created from a dataset which constitutes last returns of raw LiDAR data that was acquired at bare lands for Gilmer County, USA between March and April 2004, where qualitative and quantitative testing analyses have been performed. Visual analysis has shown that the DEM can withstand a considerable degree of quality with reduced densities down to 0.128 pts/m2 (47 % of the data remaining), however degradations in the DEM visual characteristics appeared in coarser tones and rougher textures have occurred with more reductions. Additionally, the statistical analysis has indicated that the standard deviations of the DEM elevations have decreased by only 22 % of the total decrease with data density reductions down to 0.101 pts/m2 (37 % of the data remaining) while greater rate of decreasing in the standard deviations has occurred with more reductions referring to greater rate of surface smoothing and elevation approximating. Furthermore, the accuracy analysis testing has given that the DEM accuracy has degraded by only 4.83 % of the total degradations with data density reductions down to 0.128 pts/m2, however great deteriorations in the DEM accuracy have occurred with more data reductions. Finally, it is recommended that LiDAR data can withstand point density reductions down to 0.128 pts/m2 (about 50 % of the data) without big deteriorations in the visual and

  10. Delineation of alluvial fans from Digital Elevation Models with a GIS algorithm for the geomorphological mapping of the Earth and Mars

    NASA Astrophysics Data System (ADS)

    Norini, Gianluca; Zuluaga, Maria Clara; Ortiz, Iris Jill; Aquino, Dakila T.; Lagmay, Alfredo Mahar F.

    2016-11-01

    Alluvial fans are prominent depositional geomorphic features present in nearly all global climates on Earth, and also found on Mars. In this study, we present a Geographic Information System (GIS) algorithm designed for the semi-automated detection of alluvial fans that are connected to their contributing upstream drainage network, from the analysis of Digital Elevation Models (DEMs). Through a combination of spatial analysis procedures, the GIS algorithm generates maps of alluvial fans and their upstream source drainage and watersheds. Tests of the algorithm in areas with well-known alluvial fans indicate that this new GIS procedure is capable of high-accuracy mapping of the fan apexes and correct delineation of fan deposits, in both arid and humid climates. Possible future applications of the GIS algorithm presented in this study include the systematic survey of alluvial fans at the local, regional and planetary scales, important for geologic hazard assessment, studies on the evolution of climate, analysis of continental sedimentary environments, understanding of the interplay between the endogenous dynamics and exogenous processes, and the evaluation of natural resources.

  11. Adjustment of measurements with multiplicative errors: error analysis, estimates of the variance of unit weight, and effect on volume estimation from LiDAR-type digital elevation models.

    PubMed

    Shi, Yun; Xu, Peiliang; Peng, Junhuan; Shi, Chuang; Liu, Jingnan

    2014-01-10

    Modern observation technology has verified that measurement errors can be proportional to the true values of measurements such as GPS, VLBI baselines and LiDAR. Observational models of this type are called multiplicative error models. This paper is to extend the work of Xu and Shimada published in 2000 on multiplicative error models to analytical error analysis of quantities of practical interest and estimates of the variance of unit weight. We analytically derive the variance-covariance matrices of the three least squares (LS) adjustments, the adjusted measurements and the corrections of measurements in multiplicative error models. For quality evaluation, we construct five estimators for the variance of unit weight in association of the three LS adjustment methods. Although LiDAR measurements are contaminated with multiplicative random errors, LiDAR-based digital elevation models (DEM) have been constructed as if they were of additive random errors. We will simulate a model landslide, which is assumed to be surveyed with LiDAR, and investigate the effect of LiDAR-type multiplicative error measurements on DEM construction and its effect on the estimate of landslide mass volume from the constructed DEM.

  12. Prototype land-cover mapping of the Huascarán Biosphere Reserve (Peru) using a digital elevation model, and the NDSI and NDVI indices

    NASA Astrophysics Data System (ADS)

    Silverio, Walter; Jaquet, Jean-Michel

    2009-03-01

    On the basis of Landsat 7 ETM+ imagery, a prototype land-cover map was prepared for the Huascarán Biosphere Reserve (Peru). This document should contribute to the sustainable management of the Huascarán Biosphere Reserve, while making it possible to establish a regional planning policy and to prepare a natural risks map, which is still lacking in the region. The influence of the topography on radiometry was attenuated by using the normalized difference snow index (NDSI) and normalized difference vegetation index (NDVI), which were segmented using their histogram. A digital elevation model (DEM) was introduced to define the "highlands" and "lowlands". In the latter, the slope derived from the DEM was combined with the NDVI to map the agricultural surfaces. Twenty-one spectral classes were defined and their correspondence with land-cover themes was checked by field observations. The land-cover map provides original information on the extent of the glacial cover, debris-covered glaciers, 881 lakes, vegetation density, agricultural surfaces, urban zones and mines.

  13. Validating NASA's Airborne Multikilohertz Microlaser Altimeter (Microaltimeter) by Direct Comparison of Data Taken Over Ocean City, Maryland Against an Existing Digital Elevation Model

    NASA Technical Reports Server (NTRS)

    Abel, Peter

    2003-01-01

    NASA's Airborne Multikilohertz Microlaser Altimeter (Microaltimeter) is a scanning, photon-counting laser altimeter, which uses a low energy (less than 10 microJuoles), high repetition rate (approximately 10 kHz) laser, transmitting at 532 nm. A 14 cm diameter telescope images the ground return onto a segmented anode photomultiplier, which provides up to 16 range returns for each fire. Multiple engineering flights were made during 2001 and 2002 over the Maryland and Virginia coastal area, all during daylight hours. Post-processing of the data to geolocate the laser footprint and determine the terrain height requires post- detection Poisson filtering techniques to extract the actual ground returns from the noise. Validation of the instrument's ability to produce accurate terrain heights will be accomplished by direct comparison of data taken over Ocean City, Maryland with a Digital Elevation Model (DEM) of the region produced at Ohio State University (OSU) from other laser altimeter and photographic sources. The techniques employed to produce terrain heights from the Microaltimeter ranges will be shown, along with some preliminary comparisons with the OSU DEM.

  14. High-resolution digital elevation model from tri-stereo Pleiades-1 satellite imagery for lava flow volume estimates at Fogo Volcano

    NASA Astrophysics Data System (ADS)

    Bagnardi, Marco; González, Pablo J.; Hooper, Andrew

    2016-06-01

    Resolving changes in topography through time using accurate high-resolution digital elevation models (DEMs) is key to understanding active volcanic processes. For the first time in a volcanic environment, we utilize very high-resolution tri-stereo optical imagery acquired by the Pleiades-1 satellite constellation and generate a 1 m resolution DEM of Fogo Volcano, Cape Verde -- the most active volcano in the Eastern Atlantic region. Point cloud density is increased by a factor of 6.5 compared to conventional stereo imagery, and the number of 1 m2 pixels with no height measurements is reduced by 43%. We use the DEM to quantify topographic changes associated with the 2014-2015 eruption at Fogo. Height differences between the posteruptive Pleiades-1 DEM and the preeruptive topography from TanDEM-X give a lava flow volume of 45.83 ± 0.02 × 106 m3, emplaced over an area of 4.8 km2 at a mean rate of 6.8 m3 s-1.

  15. Adjustment of Measurements with Multiplicative Errors: Error Analysis, Estimates of the Variance of Unit Weight, and Effect on Volume Estimation from LiDAR-Type Digital Elevation Models

    PubMed Central

    Shi, Yun; Xu, Peiliang; Peng, Junhuan; Shi, Chuang; Liu, Jingnan

    2014-01-01

    Modern observation technology has verified that measurement errors can be proportional to the true values of measurements such as GPS, VLBI baselines and LiDAR. Observational models of this type are called multiplicative error models. This paper is to extend the work of Xu and Shimada published in 2000 on multiplicative error models to analytical error analysis of quantities of practical interest and estimates of the variance of unit weight. We analytically derive the variance-covariance matrices of the three least squares (LS) adjustments, the adjusted measurements and the corrections of measurements in multiplicative error models. For quality evaluation, we construct five estimators for the variance of unit weight in association of the three LS adjustment methods. Although LiDAR measurements are contaminated with multiplicative random errors, LiDAR-based digital elevation models (DEM) have been constructed as if they were of additive random errors. We will simulate a model landslide, which is assumed to be surveyed with LiDAR, and investigate the effect of LiDAR-type multiplicative error measurements on DEM construction and its effect on the estimate of landslide mass volume from the constructed DEM. PMID:24434880

  16. Adjustment of measurements with multiplicative errors: error analysis, estimates of the variance of unit weight, and effect on volume estimation from LiDAR-type digital elevation models.

    PubMed

    Shi, Yun; Xu, Peiliang; Peng, Junhuan; Shi, Chuang; Liu, Jingnan

    2013-01-01

    Modern observation technology has verified that measurement errors can be proportional to the true values of measurements such as GPS, VLBI baselines and LiDAR. Observational models of this type are called multiplicative error models. This paper is to extend the work of Xu and Shimada published in 2000 on multiplicative error models to analytical error analysis of quantities of practical interest and estimates of the variance of unit weight. We analytically derive the variance-covariance matrices of the three least squares (LS) adjustments, the adjusted measurements and the corrections of measurements in multiplicative error models. For quality evaluation, we construct five estimators for the variance of unit weight in association of the three LS adjustment methods. Although LiDAR measurements are contaminated with multiplicative random errors, LiDAR-based digital elevation models (DEM) have been constructed as if they were of additive random errors. We will simulate a model landslide, which is assumed to be surveyed with LiDAR, and investigate the effect of LiDAR-type multiplicative error measurements on DEM construction and its effect on the estimate of landslide mass volume from the constructed DEM. PMID:24434880

  17. Satellite Remote Sensing of Landscape Freeze/Thaw State Dynamics for Complex Topography and Fire Disturbance Areas Using Multi-Sensor Radar and SRTM Digital Elevation Models

    NASA Astrophysics Data System (ADS)

    Podest, E.; McDonald, K.; Kimball, J.; Randerson, J. T.

    2003-12-01

    The annual freeze/thaw cycle drives the length of the growing season in the boreal forest, and is a major factor determining annual productivity and associated exchange of CO2 with the atmosphere. Variations in freeze/thaw processes are spatially and temporally complex in boreal environments, particularly in areas of complex topography and in fire disturbance regimes. We investigate the spatial and temporal characteristics of seasonal freeze/thaw dynamics in complex boreal landscapes, as derived from radar backscatter measured with ERS (C-band, VV polarization, 200m resolution) and JERS-1 (L-band, HH polarization, 100m resolution) Synthetic Aperture Radars (SARs), and with the SeaWinds scatterometer (Ku-band, 25km resolution). C- and L-band backscatter are applied to characterize freeze/thaw transitions for a chronosequence of recovering burn sites near Delta Junction, Alaska, and for a region of complex topography on the Kenai Peninsula, Alaska. We characterize differences in radar-derived freeze/thaw state, examining transitions over complex terrain and landscape disturbance regimes. In areas of complex terrain, we explore freeze/thaw dynamics related to elevation, slope aspect and varying landcover. In the burned regions, we explore the timing of seasonal freeze/thaw transition as related to the recovering landscape, relative to that of a nearby control site. We apply in situ biophysical measurements, including flux tower measurements to validate and interpret the remotely sensed parameters. A multi-scale analysis is performed relating high-resolution SAR backscatter and moderate resolution scatterometer measurements to assess trade-offs in spatial and temporal resolution in the remotely sensed fields. A temporal change discriminator is applied to classify time series radar imagery to classify the landscape freeze-thaw state. We apply a 30m-resolution digital elevation model (DEM) derived from Shuttle Radar Topography Mission (SRTM) data to orthorectify the time

  18. Satellite-derived Digital Elevation Model (DEM) selection, preparation and correction for hydrodynamic modelling in large, low-gradient and data-sparse catchments

    NASA Astrophysics Data System (ADS)

    Jarihani, Abdollah A.; Callow, John N.; McVicar, Tim R.; Van Niel, Thomas G.; Larsen, Joshua R.

    2015-05-01

    Digital Elevation Models (DEMs) that accurately replicate both landscape form and processes are critical to support modelling of environmental processes. Topographic accuracy, methods of preparation and grid size are all important for hydrodynamic models to efficiently replicate flow processes. In remote and data-scarce regions, high resolution DEMs are often not available and therefore it is necessary to evaluate lower resolution data such as the Shuttle Radar Topography Mission (SRTM) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) for use within hydrodynamic models. This paper does this in three ways: (i) assessing point accuracy and geometric co-registration error of the original DEMs; (ii) quantifying the effects of DEM preparation methods (vegetation smoothed and hydrologically-corrected) on hydrodynamic modelling relative accuracy; and (iii) quantifying the effect of the hydrodynamic model grid size (30-2000 m) and the associated relative computational costs (run time) on relative accuracy in model outputs. We initially evaluated the accuracy of the original SRTM (∼30 m) seamless C-band DEM (SRTM DEM) and second generation products from the ASTER (ASTER GDEM) against registered survey marks and altimetry data points from the Ice, Cloud, and land Elevation Satellite (ICESat). SRTM DEM (RMSE = 3.25 m,) had higher accuracy than ASTER GDEM (RMSE = 7.43 m). Based on these results, the original version of SRTM DEM, the ASTER GDEM along with vegetation smoothed and hydrologically corrected versions were prepared and used to simulate three flood events along a 200 km stretch of the low-gradient Thompson River, in arid Australia (using five metrics: peak discharge, peak height, travel time, terminal water storage and flood extent). The hydrologically corrected DEMs performed best across these metrics in simulating floods compared with vegetation smoothed DEMs and original DEMs. The response of model performance to grid size was non

  19. Precise computation of the direct and indirect topographic effects of Helmert's 2nd method of condensation using SRTM30 digital elevation model

    NASA Astrophysics Data System (ADS)

    Wang, Y.

    2011-01-01

    The direct topographic effect (DTE) and indirect topographic effect (ITE) of Helmert's 2nd method of condensation are computed using the digital elevation model (DEM) SRTM30 in 30 arc-seconds globally. The computations assume a constant density of the topographic masses. Closed formulas are used in the inner zone of half degree, and Nagy's formulas are used in the innermost column to treat the singularity of integrals. To speed up the computations, 1-dimensional fast Fourier transform (1D FFT) is applied in outer zone computations. The computation accuracy is limited to 0.1 mGal and 0.1cm for the direct and indirect effect, respectively. The mean value and standard deviation of the DTE are -0.8 and ±7.6 mGal over land areas. The extreme value -274.3 mGal is located at latitude -13.579° and longitude 289.496°, at the height of 1426 meter in the Andes Mountains. The ITE is negative everywhere and has its minimum of -235.9 cm at the peak of Himalayas (8685 meter). The standard deviation and mean value over land areas are ±15.6 cm and -6.4 cm, respectively. Because the Stokes kernel does not contain the zero and first degree spherical harmonics, the mean value of the ITE can't be compensated through the remove-restore procedure under the Stokes-Helmert scheme, and careful treatment of the mean value in the ITE is required.

  20. Digital map of the elevation of the base of the High Plains Aquifer in the Republican River Basin upstream of Hardy, Nebraska, in parts of Nebraska, Kansas, and Colorado

    USGS Publications Warehouse

    Johnson, Michaela R.; Cornwall, James F.; Landon, Matthew K.

    2002-01-01

    This digital spatial data set consists of the aquifer base elevation contours (50-foot contour interval) for part of the High Plains aquifer in the central United States. This subset of the High Plains aquifer covers the Republican River Basin in Nebraska, Kansas, and Colorado upstream from the streamflow station on the Republican River near Hardy, Nebraska, near the Kansas/Nebraska border. In Nebraska, the digitized contours extend to the South Platte, Platte, and Little Blue Rivers. In Colorado and Kansas, the digital contours extend to the edge of the High Plains aquifer. These boundaries were chosen to simplify boundary conditions for a computer simulation model being used for a hydrologic study of the Republican River Basin. The data are not intended for use at scales larger than 1:500,000.

  1. The sensitivity of a volcanic flow model to digital elevation model accuracy: experiments with digitised map contours and interferometric SAR at Ruapehu and Taranaki volcanoes, New Zealand

    NASA Astrophysics Data System (ADS)

    Stevens, N. F.; Manville, V.; Heron, D. W.

    2003-01-01

    A growing trend in the field of volcanic hazard assessment is the use of computer models of a variety of flows to predict potential areas of devastation. These can be compared against historic and geologic evidence of past events for model calibration, or used to construct hazard zone maps for mitigation and planning purposes. The accuracy of these computer models depends on two factors, the nature and veracity of the flow model itself, and the accuracy of the topographic data set over which it is run. All digital elevation models (DEMs) contain innate errors. The nature of these depends on the accuracy of the original measurements of the terrain, and on the method used to build the DEM. In this paper we investigate the effect that these errors have on the performance of a volcanic flow model designed to delineate areas at risk from lahar inundation. The model was run over two DEMs of southern Ruapehu volcano derived from (1) digitised 1:50 000 topographic maps, and (2) airborne C-band synthetic aperture radar (SAR) interferometry obtained using the NASA AIRSAR system. On steep slopes of ˜4° or more, drainage channels are more likely to be incised deeply, and flow paths predicted by the model are generally in agreement for both DEMs despite the differing nature of the source data. Over shallow slopes (˜<4°), where channels are less deep and are more likely to meander, problems were encountered with flow path prediction in both DEMs due to interpolation errors between contours, and due to forestry. The predicted lateral and longitudinal extent of deposit inundation was also sensitive to the type of DEM used, most likely in response to the differing degrees of surface texture preserved in the DEMs. A technique to refine contour-derived DEMs and reduce the error in predicted flow paths was tested to improve the reliability of the modelled flow path predictions. In areas where high-resolution topographic maps are unavailable, forthcoming topographic measurements

  2. Countrywide digital elevation models for the Islamic Republic of Mauritania—SRTM and ASTER (phase V, deliverable 65): Chapter F in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

    USGS Publications Warehouse

    Lee, Gregory K.

    2015-01-01

    A digital elevation model (DEM) of the entire country of the Islamic Republic of Mauritania was produced using Shuttle Radar Topography Mission (SRTM) data as required for deliverable 65 of the contract. In addition, because of significant recent advancements of availability, seamlessness, and validity of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) global elevation data, the U.S. Geological Survey (USGS) extended its efforts to include a higher resolution countrywide ASTER DEM as value added to the required Deliverable 63, which was limited to five areas within the country. Both SRTM and ASTER countrywide DEMs have been provided in ERDAS Imagine (.img) format that is also directly compatible with ESRI ArcMap, ArcGIS Explorer, and other GIS applications.

  3. Assessment of Photogrammetry Structure-from-Motion Compared to Terrestrial LiDAR Scanning for Generating Digital Elevation Models. Application to the Austre Lovéenbreen Polar Glacier Basin, Spitsbergen 79°N

    NASA Astrophysics Data System (ADS)

    Tolle, F.; Friedt, J. M.; Bernard, É.; Prokop, A.; Griselin, M.

    2014-12-01

    Digital Elevation Model (DEM) is a key tool for analyzing spatially dependent processes including snow accumulation on slopes or glacier mass balance. Acquiring DEM within short time intervals provides new opportunities to evaluate such phenomena at the daily to seasonal rates.DEMs are usually generated from satellite imagery, aerial photography, airborne and ground-based LiDAR, and GPS surveys. In addition to these classical methods, we consider another alternative for periodic DEM acquisition with lower logistics requirements: digital processing of ground based, oblique view digital photography. Such a dataset, acquired using commercial off the shelf cameras, provides the source for generating elevation models using Structure from Motion (SfM) algorithms. Sets of pictures of a same structure but taken from various points of view are acquired. Selected features are identified on the images and allow for the reconstruction of the three-dimensional (3D) point cloud after computing the camera positions and optical properties. This cloud point, generated in an arbitrary coordinate system, is converted to an absolute coordinate system either by adding constraints of Ground Control Points (GCP), or including the (GPS) position of the cameras in the processing chain. We selected the opensource digital signal processing library provided by the French Geographic Institute (IGN) called Micmac for its fine processing granularity and the ability to assess the quality of each processing step.Although operating in snow covered environments appears challenging due to the lack of relevant features, we observed that enough reference points could be identified for 3D reconstruction. Despite poor climatic environment of the Arctic region considered (Ny Alesund area, 79oN) is not a problem for SfM, the low lying spring sun and the cast shadows appear as a limitation because of the lack of color dynamics in the digital cameras we used. A detailed understanding of the processing steps

  4. CXCL10 mRNA expression predicts response to neoadjuvant chemoradiotherapy in rectal cancer patients.

    PubMed

    Li, Cong; Wang, Zhimin; Liu, Fangqi; Zhu, Ji; Yang, Li; Cai, Guoxiang; Zhang, Zhen; Huang, Wei; Cai, Sanjun; Xu, Ye

    2014-10-01

    Chemoradiotherapy has been commonly used as neoadjuvant therapy for rectal cancer to allow for less aggressive surgical approaches and to improve quality of life. In cancer, it has been reported that CXCL10 has an anti-tumor function. However, the association between CXCL10 and chemoradiosensitivity has not been fully investigated. We performed this study to investigate the relationship between CXCL10 expression and chemoradiosensitivity in rectal cancer patients. Ninety-five patients with rectal cancer who received neoadjuvant chemoradiotherapy (NCRT) were included. Clinical parameters were compared with the outcome of NCRT and CXCL10 messenger RNA (mRNA) expression between the pathological complete response (pCR) group and non-pathological complete response (npCR) group. CXCL10 mRNA and protein expressions between groups were analyzed using the Student's t test and chi-square test. The mean mRNA level of CXCL10 in the pCR group was significantly higher than that in the npCR group (p = 0.010). In the pCR group, 73.7 % of the patients had high CXCL10 mRNA expression, and 61.4 % of the patients in the npCR group had low CXCL10 mRNA expression. Subjects with high CXCL10 mRNA expression demonstrated a higher sensitivity to NCRT (p = 0.011). The receiver operating characteristic curve showed that the diagnostic performance of CXCL10 mRNA expression had an area under the curve of 0.720 (95 % confidence interval, 0.573-0.867). There were no differences between the pCR and npCR groups in CXCL10 protein expression (p > 0.05). High CXCL10 mRNA expression is associated with a better tumor response to NCRT in rectal cancer patients and may predict the outcome of NCRT in this malignancy.

  5. Computer Programs to Display and Modify Data in Geographic Coordinates and Methods to Transfer Positions to and from Maps, with Applications to Gravity Data Processing, Global Positioning Systems, and 30-Meter Digital Elevation Models

    USGS Publications Warehouse

    Plouff, Donald

    1998-01-01

    Computer programs were written in the Fortran language to process and display gravity data with locations expressed in geographic coordinates. The programs and associated processes have been tested for gravity data in an area of about 125,000 square kilometers in northwest Nevada, southeast Oregon, and northeast California. This report discusses the geographic aspects of data processing. Utilization of the programs begins with application of a template (printed in PostScript format) to transfer locations obtained with Global Positioning Systems to and from field maps and includes a 5-digit geographic-based map naming convention for field maps. Computer programs, with source codes that can be copied, are used to display data values (printed in PostScript format) and data coverage, insert data into files, extract data from files, shift locations, test for redundancy, and organize data by map quadrangles. It is suggested that 30-meter Digital Elevation Models needed for gravity terrain corrections and other applications should be accessed in a file search by using the USGS 7.5-minute map name as a file name, for example, file '40117_B8.DEM' contains elevation data for the map with a southeast corner at lat 40? 07' 30' N. and lon 117? 52' 30' W.

  6. Optical positions of ICRF sources from CTIO 1.0m data

    NASA Astrophysics Data System (ADS)

    Zacharias, M. I.; Berghea, C.; Dieck, C.; Dudik, R.; Hennessy, G.; Veillette, D.; Zacharias, N.

    2015-10-01

    As part of the USNO radio-optical reference frame link project, data were taken with the CTIO 1.0 m telescope in 2009. First position results of 5 ICRF sources are presented as part of this primarily photometric investigation of optical counterparts.

  7. An approach to regional wetland digital elevation model development using a differential global positioning system and a custom-built helicopter-based surveying system

    USGS Publications Warehouse

    Jones, J.W.; Desmond, G.B.; Henkle, C.; Glover, R.

    2012-01-01

    Accurate topographic data are critical to restoration science and planning for the Everglades region of South Florida, USA. They are needed to monitor and simulate water level, water depth and hydroperiod and are used in scientific research on hydrologic and biologic processes. Because large wetland environments and data acquisition challenge conventional ground-based and remotely sensed data collection methods, the United States Geological Survey (USGS) adapted a classical data collection instrument to global positioning system (GPS) and geographic information system (GIS) technologies. Data acquired with this instrument were processed using geostatistics to yield sub-water level elevation values with centimetre accuracy (??15 cm). The developed database framework, modelling philosophy and metadata protocol allow for continued, collaborative model revision and expansion, given additional elevation or other ancillary data. ?? 2012 Taylor & Francis.

  8. The National Map - Elevation

    USGS Publications Warehouse

    Gesch, Dean; Evans, Gayla; Mauck, James; Hutchinson, John; Carswell, William J.

    2009-01-01

    The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS. The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories. The NED is derived from diverse source data sets that are processed to a specification with a consistent resolution, coordinate system, elevation units, and horizontal and vertical datums. The NED is the logical result of the maturation of the long-standing USGS elevation program, which for many years concentrated on production of topographic map quadrangle-based digital elevation models. The NED serves as the elevation layer of The National Map, and provides basic elevation information for earth science studies and mapping applications in the United States. The NED is a multi-resolution dataset that is updated bimonthly to integrate newly available, improved elevation source data. NED data are available nationally at grid spacings of 1 arc-second (approximately 30 meters) for the conterminous United States, and at 1/3 and 1/9 arc-seconds (approximately 10 and 3 meters, respectively) for parts of the United States. Most of the NED for Alaska is available at 2-arc-second (about 60 meters) grid spacing, where only lower resolution source data exist. Part of Alaska is available at the 1/3-arc-second resolution, and plans are in development for a significant upgrade in elevation data coverage of the State over the next 5 years. Specifications for the NED include the following: *Coordinate system: Geographic (decimal degrees of latitude and longitude), *Horizontal datum: North American Datum of 1983 (NAD 83), *Vertical datum: North American Vertical Datum of 1988 (NAVD 88) over the conterminous United States and varies in other areas, and *Elevation units: Decimal meters.

  9. Design of the 10 m AEI prototype facility for interferometry studies. A brief overview

    NASA Astrophysics Data System (ADS)

    Westphal, T.; Bergmann, G.; Bertolini, A.; Born, M.; Chen, Y.; Cumming, A. V.; Cunningham, L.; Dahl, K.; Gräf, C.; Hammond, G.; Heinzel, G.; Hild, S.; Huttner, S.; Jones, R.; Kawazoe, F.; Köhlenbeck, S.; Kühn, G.; Lück, H.; Mossavi, K.; Pöld, J. H.; Somiya, K.; van Veggel, A. M.; Wanner, A.; Willke, B.; Strain, K. A.; Goßler, S.; Danzmann, K.

    2012-03-01

    The AEI 10 m prototype interferometer facility is currently being constructed at the Albert Einstein Institute in Hannover, Germany. It aims to perform experiments for future gravitational wave detectors using advanced techniques. Seismically isolated benches are planned to be interferometrically interconnected and stabilized, forming a low-noise testbed inside a 100 m3 ultra-high vacuum system. A well-stabilized high-power laser will perform differential position readout of 100 g test masses in a 10 m suspended arm-cavity enhanced Michelson interferometer at the crossover of measurement (shot) noise and back-action (quantum radiation pressure) noise, the so-called Standard Quantum Limit (SQL). Such a sensitivity enables experiments in the highly topical field of macroscopic quantum mechanics. In this article we introduce the experimental facility and describe the methods employed; technical details of subsystems will be covered in future papers.

  10. DISSOLUTION OF PLUTONIUM METAL IN 8-10 M NITRIC ACID

    SciTech Connect

    Rudisill, T.; Pierce, R.

    2012-02-21

    The H-Canyon facility will be used to dissolve Pu metal for subsequent purification and conversion to plutonium dioxide (PuO{sub 2}) using Phase II of HB-Line. To support the new mission, the development of a Pu metal dissolution flowsheet which utilizes concentrated (8-10 M) nitric acid (HNO{sub 3}) solutions containing potassium fluoride (KF) is required. Dissolution of Pu metal in concentrated HNO{sub 3} is desired to eliminate the need to adjust the solution acidity prior to purification by anion exchange. The preferred flowsheet would use 8-10 M HNO{sub 3}, 0.015-0.07 M KF, and 0.5-1.0 g/L Gd to dissolve the Pu up to 6.75 g/L. An alternate flowsheet would use 8-10 M HNO{sub 3}, 0.1-0.2 M KF, and 1-2 g/L B to dissolve the Pu. The targeted average Pu metal dissolution rate is 20 mg/min-cm{sup 2}, which is sufficient to dissolve a 'standard' 2250-g Pu metal button in 24 h. Plutonium metal dissolution rate measurements showed that if Gd is used as the nuclear poison, the optimum dissolution conditions occur in 10 M HNO{sub 3}, 0.04-0.05 M KF, and 0.5-1.0 g/L Gd at 112 to 116 C (boiling). These conditions will result in an estimated Pu metal dissolution rate of {approx}11-15 mg/min-cm{sup 2} and will result in dissolution times of 36-48 h for standard buttons. The recommended minimum and maximum KF concentrations are 0.03 M and 0.07 M, respectively. The maximum KF concentration is dictated by a potential room-temperature Pu-Gd-F precipitation issue at low Pu concentrations. The purpose of the experimental work described in this report was two-fold. Initially a series of screening experiments was performed to measure the dissolution rate of Pu metal as functions of the HNO{sub 3}, KF, and Gd or B concentrations. The objective of the screening tests was to propose optimized conditions for subsequent flowsheet demonstration tests. Based on the rate measurements, this study found that optimal dissolution conditions in solutions containing 0.5-1.0 g/L Gd occurred in 8-10

  11. ELEVATING MECHANISM

    DOEpatents

    Frederick, H.S.; Kinsella, M.A.

    1959-02-24

    An elevator is described, which is arranged for movement both in a horizontal and in a vertical direction so that the elevating mechanism may be employed for servicing equipment at separated points in a plant. In accordance with the present invention, the main elevator chassis is suspended from a monorail. The chassis, in turn supports a vertically moveable carriage, a sub- carriage vertically moveable on the carriage, and a turntable carried by the sub- carriage and moveable through an arc of 90 with the equipment attached thereto. In addition, the chassis supports all the means required to elevate or rotate the equipment.

  12. Satellite remote sensing of landscape freeze/thaw state dynamics for complex Topography and Fire Disturbance Areas Using multi-sensor radar and SRTM digital elevation models

    NASA Technical Reports Server (NTRS)

    Podest, Erika; McDonald, Kyle; Kimball, John; Randerson, James

    2003-01-01

    We characterize differences in radar-derived freeze/thaw state, examining transitions over complex terrain and landscape disturbance regimes. In areas of complex terrain, we explore freezekhaw dynamics related to elevation, slope aspect and varying landcover. In the burned regions, we explore the timing of seasonal freeze/thaw transition as related to the recovering landscape, relative to that of a nearby control site. We apply in situ biophysical measurements, including flux tower measurements to validate and interpret the remotely sensed parameters. A multi-scale analysis is performed relating high-resolution SAR backscatter and moderate resolution scatterometer measurements to assess trade-offs in spatial and temporal resolution in the remotely sensed fields.

  13. Recent Observations of IC443 with the Whipple 10m Telescope

    SciTech Connect

    Holder, J.; Badran, H.M.; Blaylock, G.; Bond, I.H.; Boyle, P.J.; Bradbury, S.M.; Buckley, J.H.; Byrum, K.; Carter-Lewis, D.A.; Celik, O.; Cogan, P.; Cui, W.; Calle Perez, I. de la; Daniel, M.K.; Duke, C.; Falcone, A.; Fegan, D.J.; Fegan, S.J.; Finley, J.P.; Fortson, L.F.

    2005-02-21

    We present here the results of recent observations made with the Whipple 10m imaging Cherenkov telescope of the region of the supernova remnant IC443. No evidence for gamma-ray emission was found, and we obtain an upper limit above 500 GeV (99.9% confidence) of 0.6 x 10-7 ph m-2 s-1 (0.11 Crab) at the location of the recently identified X-ray plerion nebula and 0.8 x 10-7 ph m-2 s-1 (0.14 Crab) at the site of the OH maser at the densest part of the molecular cloud.

  14. Investigation on High Performance of 10m Semi Anechoic Chamber by using Open-Top Hollow Pyramidal Hybrid EM Wave Absorber

    NASA Astrophysics Data System (ADS)

    Kurihara, Hiroshi; Saito, Toshifumi; Suzuki, Yoshikazu; Nishikata, Atsuhiro; Hashimoto, Osamu

    The emission radiated from electric and electronic equipments is evaluated through OATS. Recently, it is not fully prepared the environment for OATS because of a variety of communication radiation sources (e.g., digital television broadcast and cellular phone station). Therefore, the EM anechoic chambers are becoming more and more important as EMI test site. On the other hand, the EM anechoic chambers are needed high performance in order to cut down EMI countermeasure cost and calculate the antenna factor. The objective of this paper is mainly to present the EM wave absorber design in order to obtain within ±2dB against the theoretical site attenuation values in the 10m semi anechoic chamber at 30MHz to 300MHz. We get the necessary reflectivity of EM wave absorber by the basic site attenuation equation. We design the open-top hollow pyramidal new hybrid EM wave absorber consisted of 180cm long dielectric loss foam and ferrite tiles. Then, we design the 10m semi anechoic chamber by using the ray-tracing simulation and construct it in the size of L24m×W15.2m×H11.2m. More over, we measure the site attenuation of the constructed 10m semi anechoic chamber by using the broadband calculable dipole antennas. As the result, we confirm the validity of the designed open-top hollow pyramidal new hybrid EM wave absorber.

  15. DISSOLUTION OF PLUTONIUM METAL IN 8-10 M NITRIC ACID

    SciTech Connect

    Rudisill, T. S.; Pierce, R. A.

    2012-07-02

    The H-Canyon facility will be used to dissolve Pu metal for subsequent purification and conversion to plutonium dioxide (PuO{sub 2}) using Phase II of HB-Line. To support the new mission, the development of a Pu metal dissolution flowsheet which utilizes concentrated (8-10 M) nitric acid (HNO{sub 3}) solutions containing potassium fluoride (KF) is required. Dissolution of Pu metal in concentrated HNO{sub 3} is desired to eliminate the need to adjust the solution acidity prior to purification by anion exchange. The preferred flowsheet would use 8-10 M HNO{sub 3}, 0.015-0.07 M KF, and 0.5-1.0 g/L Gd to dissolve the Pu up to 6.75 g/L. An alternate flowsheet would use 8-10 M HNO{sub 3}, 0.05-0.2 M KF, and 1-2 g/L B to dissolve the Pu. The targeted average Pu metal dissolution rate is 20 mg/min-cm{sup 2}, which is sufficient to dissolve a “standard” 2250-g Pu metal button in 24 h. Plutonium metal dissolution rate measurements showed that if Gd is used as the nuclear poison, the optimum dissolution conditions occur in 10 M HNO{sub 3}, 0.04-0.05 M KF, and 0.5-1.0 g/L Gd at 112 to 116 °C (boiling). These conditions will result in an estimated Pu metal dissolution rate of ~11-15 mg/min-cm{sup 2} and will result in dissolution times of 36-48 h for standard buttons. The recommended minimum and maximum KF concentrations are 0.03 M and 0.07 M, respectively. The data also indicate that lower KF concentrations would yield dissolution rates for B comparable to those observed with Gd at the same HNO{sub 3} concentration and dissolution temperature. To confirm that the optimal conditions identified by the dissolution rate measurements can be used to dissolve Pu metal up to 6.75 g/L in the presence of representative concentrations of Fe and Gd or B, a series of experiments was performed to demonstrate the flowsheets. In three of the five experiments, the offgas generation rate during the dissolution was measured and samples were analyzed for hydrogen gas (H{sub 2}). The use of

  16. Constraining the Bulk Density of 10m-Class Near-Earth Asteroid 2012 LA

    NASA Astrophysics Data System (ADS)

    Mommert, Michael; Hora, Joseph; Farnocchia, Davide; Trilling, David; Chesley, Steve; Harris, Alan; Mueller, Migo; Smith, Howard

    2016-08-01

    The physical properties of near-Earth asteroids (NEAs) provide important hints on their origin, as well as their past physical and orbital evolution. Recent observations seem to indicate that small asteroids are different than expected: instead of being monolithic bodies, some of them instead resemble loose conglomerates of smaller rocks, so called 'rubble piles'. This is surprising, since self-gravitation is practically absent in these bodies. Hence, bulk density measurements of small asteroids, from which their internal structure can be estimated, provide unique constraints on asteroid physical models, as well as models for asteroid evolution. We propose Spitzer Space Telescope observations of 10 m-sized NEA 2012 LA, which will allow us to constrain the diameter, albedo, bulk density, macroporosity, and mass of this object. We require 30 hrs of Spitzer time to detect our target with a minimum SNR of 3 in CH2. In order to interpret our observational results, we will use the same analysis technique that we used in our successful observations and analyses of tiny asteroids 2011 MD and 2009 BD. Our science goal, which is the derivation of the target's bulk density and its internal structure, can only be met with Spitzer. Our observations will produce only the third comprehensive physical characterization of an asteroid in the 10m size range (all of which have been carried out by our team, using Spitzer). Knowledge of the physical properties of small NEAs, some of which pose an impact threat to the Earth, is of importance for understanding their evolution and estimating the potential of destruction in case of an impact, as well as for potential manned missions to NEAs for either research or potential commercial uses.

  17. Improved mapping of flood extent and flood depth using space based SAR data in combination with very high resolution digital elevation data

    NASA Astrophysics Data System (ADS)

    Zwenzner, H.

    2009-04-01

    Due to their capability to present a synoptic view of the spatial extent of floods, remote sensing technology, and especially synthetic aperture radar (SAR) systems, have been successfully applied for flood mapping and monitoring applications during the past decades. However, the quality and accuracy of the flood masks and derived flood parameters highly depend on the geometric precision of the satellite data as well as on the classification accuracy of the derived water mask. The incorporation of high resolution elevation data from LiDAR measurements for example can help to improve the plausibility and reliability of the flood masks. On the basis of the improved flood masks more sophisticated parameters such as inundation depth can be derived. A cross section approach is presented that allows the dynamic fitting of the position of the flood mask profiles according to the underlying terrain information from the DEM. The method was tested on the River Severn (UK), for which TerraSAR-X stripmap data with 3 meters pixel spacing acquired during the 2007 summer flood are used in combination with a LiDAR DEM of 2 meters pixel size. Initially, the cross sections were established perpendicularly to the major flow direction along the 7 km reach of the River Severn. The profile spacing was set to 50 meters. For each cross section profile the water level was extracted at the position of the left and the right border of the flood. On the basis of the longitudinal profile, which contains the sequence of all cross section profiles, a moving average was applied on the water levels in order to get a smooth water surface and to reduce single outliers. However, in case of obvious irregularities in the water levels illustrated in the longitudinal profile and caused by misclassification the respective cross-sections had to be excluded from further analysis. It must be taken into account, that the approach is mainly affected by possible classification errors in the dimension of more

  18. Evaluating the Impact of Sea Level Rise and Coastal Flooding on NASA Centers and Facilities by Implementing Terrestrial Laser Scanning Surveys to Improve Coastal Digital Elevation and Inundation Models

    NASA Astrophysics Data System (ADS)

    Bell, L. J.; Nerem, R. S.; Williams, K.; Meertens, C.; Lestak, L.; Masters, D.

    2014-12-01

    Sea level is rising in response to climate change. Currently the global mean rate is a little over 3 mm/year, but it is expected to accelerate significantly over this century. This will have a profound impact on coastal populations and infrastructure, including NASA centers and facilities. A detailed study proposed by the University of Colorado's Center for Astrodynamics Research on the impact of sea level rise on several of NASA's most vulnerable facilities was recently funded by NASA. Individual surveys at several high-risk NASA centers were conducted and used as case studies for a broader investigation that needs to be done for coastal infrastructure around the country. The first two years of this study included implementing and conducting a terrestrial laser scanning (TLS) and GPS survey at Kennedy Space Center, Cape Canaveral, Florida, Wallops Flight Facility, Wallops Island, Virginia, Langley Research Center, Hampton, Virginia, and Ames Research Center, Moffett Field, California. We are currently using airborne LiDAR (Light Detection and Ranging) data and TLS (Terrestrial Laser Scanning) data to construct detailed digital elevation models (DEMs) of the facilities that we have assessed. The TLS data acquired at each center provides a very dense point cloud that is being used to improve the detail and accuracy of the digital elevation models currently available. We are also using GPS data we acquired at each center to assess the rate of vertical land movement at the facilities and to tie the DEM to tide gauges and other reference points. With completed, detailed DEMs of the topography and facilities at each center, a series of simple inundation models will then be applied to each area. We will use satellite altimeter data from TOPEX, Jason-1, and Jason-2 to assess the sea level changes observed near these NASA facilities over the last 20 years along with sea level projections from global climate models (GCMs) and semi-empirical projections to make detailed maps

  19. A Digital Solar Aspect Sensor

    NASA Technical Reports Server (NTRS)

    Albus, James S.

    1961-01-01

    The solar aspect sensor described herein performs the analog-to-digital conversion of data optically. To accomplish this, it uses a binary "Gray code" light mask to produce a digital indication, in vehicle-fixed coordinates, of the elevation and azimuth angles of incident light from the sun. This digital solar aspect sensor system, in Explorer X, provided measurements of both elevation and azimuth angles to +/- 2 degrees at a distance of over 140,000 statute miles.

  20. Size-frequency distribution of boulders ≥10 m on comet 103P/Hartley 2

    NASA Astrophysics Data System (ADS)

    Pajola, Maurizio; Lucchetti, Alice; Bertini, Ivano; Marzari, Francesco; A'Hearn, Michael F.; La Forgia, Fiorangela; Lazzarin, Monica; Naletto, Giampiero; Barbieri, Cesare

    2016-01-01

    Aims: We derive the size-frequency distribution of boulders on comet 103P/Hartley 2, which are computed from the images taken by the Deep Impact/HRI-V imaging system. We indicate the possible physical processes that lead to these boulder size distributions. Methods: We used images acquired by the High Resolution Imager-Visible CCD camera on 4 November 2010. Boulders ≥10 m were identified and manually extracted from the datasets with the software ArcGIS. We derived the global size-frequency distribution of the illuminated side of the comet (~50%) and identified the power-law indexes characterizing the two lobes of 103P. The three-pixel sampling detection, together with the shadowing of the surface, enables unequivocally detection of boulders scattered all over the illuminated surface. Results: We identify 332 boulders ≥10 m on the imaged surface of the comet, with a global number density of nearly 140/km2 and a cumulative size-frequency distribution represented by a power law with index of -2.7 ± 0.2. The two lobes of 103P show similar indexes, i.e., -2.7 ± 0.2 for the bigger lobe (called L1) and -2.6+ 0.2/-0.5 for the smaller lobe (called L2). The similar power-law indexes and similar maximum boulder sizes derived for the two lobes both point toward a similar fracturing/disintegration phenomena of the boulders as well as similar lifting processes that may occur in L1 and L2. The difference in the number of boulders per km2 between L1 and L2 suggests that the more diffuse H2O sublimation on L1 produce twice the boulders per km2 with respect to those produced on L2 (primary activity CO2 driven). The 103P comet has a lower global power-law index (-2.7 vs. -3.6) with respect to 67P. The global differences between the two comets' activities, coupled with a completely different surface geomorphology, make 103P hardly comparable to 67P. A shape distribution analysis of boulders ≥30 m performed on 103P suggests that the cometary boulders show more elongated shapes

  1. Size-Frequency Distribution of Boulders ≥ 10 m on Comet 103P/Hartley 2

    NASA Astrophysics Data System (ADS)

    Pajola, M.; Lucchetti, A.; A'Hearn, M. F.; Bertini, I.; Marzari, F.; La Forgia, F.; Lazzarin, M.; Naletto, G.; Barbieri, C.

    2015-12-01

    We present the first size-frequency distribution of boulders ≥ 10 m identified on comet 103P/Hartley 2, computed from the images taken by the Deep Impact/High Resolution Imager - Visible CCD camera on 4 November 2010. We derived the size-frequency distribution of the illuminated side of the comet (˜ 50%), as well as identified the power-law indexes characterizing the two lobes of 103P. 332 boulders larger than 10 m were identified on the imaged surface of the comet, with a global number density of nearly 140/km2 and a cumulative size-frequency distribution represented by a power-law with index of -2.7 ± 0.2. The two lobes of 103P show close indexes, i.e. -2.7 ± 0.2 for the bigger lobe (L1) and -2.6 +0.2/-0.5 for the smaller one (L2). Both the similar power-law indexes and the similar maximum boulder sizes derived for the two lobes point towards a similar fracturing/disintegration phenomena of the boulders as well as similar lifting processes that may occur in L1 and L2. Nonetheless, the significative difference in the number of boulders per km2 between the two lobes suggests that the more diffuse H2O sublimation on the bigger lobe produce twice the boulders per km2 with respect to those produced on the small lobe (primary activity CO2 driven). If we compare the boulder distribution of the hyperactive 103P comet with similar studies performed on 67P (67P/Churyumov-Gerasimenko, i.e. the comet studied by Rosetta spacecraft), we derive that 103P shows a lower global power-law index (-2.7 vs -3.6). The size-frequency boulder trend of 103P is somehow closer to the -2.2 value measured on the neck region of 67P, i.e. the most active region of the northern hemisphere of 67P; nevertheless the hyperactivity of 103P works in a very different way than the normal activity of 67P in the neck/Hapi area. In addition to the global differences between the two comets' activities, the absence of cliffs and walls on 103P show a completely different surface geomorphology between

  2. Deformation twinning in Ni–Mn–Ga micropillars with 10M martensite

    PubMed Central

    Reinhold, M.; Kiener, D.; Knowlton, W. B.; Dehm, G.; Müllner, P.

    2009-01-01

    The maximum actuation frequency of magnetic shape-memory alloys (MSMAs) significantly increases with decreasing size of the transducer making MSMAs interesting candidates for small scale actuator applications. To study the mechanical properties of Ni–Mn–Ga single crystals on small length scales, two single-domain micropillars with dimensions of 10×15×30 μm3 were fabricated from a Ni–Mn–Ga monocrystal using dual beam focused ion beam machining. The pillars were oriented such that the crystallographic c direction was perpendicular to the loading direction. The pillars were compressed to maximum stresses of 350 and 50 MPa, respectively. Atomic force microscopy and magnetic force microscopy were performed prior to fabrication of the pillars and following the deformation experiments. Both micropillars were deformed by twinning as evidenced by the stress-strain curve. For one pillar, a permanent deformation of 3.6% was observed and ac twins (10M martensite) were identified after unloading. For the other pillar, only 0.7% remained upon unloading. No twins were found in this pillar after unloading. The recovery of deformation is discussed in the light of pseudoelastic twinning and twin-substrate interaction. The twinning stress was higher than in similar macroscopic material. However, further studies are needed to substantiate a size effect. PMID:19859577

  3. Invited review article: A 10 mK scanning probe microscopy facility.

    PubMed

    Song, Young Jae; Otte, Alexander F; Shvarts, Vladimir; Zhao, Zuyu; Kuk, Young; Blankenship, Steven R; Band, Alan; Hess, Frank M; Stroscio, Joseph A

    2010-12-01

    We describe the design, development and performance of a scanning probe microscopy (SPM) facility operating at a base temperature of 10 mK in magnetic fields up to 15 T. The microscope is cooled by a custom designed, fully ultra-high vacuum (UHV) compatible dilution refrigerator (DR) and is capable of in situ tip and sample exchange. Subpicometer stability at the tip-sample junction is achieved through three independent vibration isolation stages and careful design of the dilution refrigerator. The system can be connected to, or disconnected from, a network of interconnected auxiliary UHV chambers, which include growth chambers for metal and semiconductor samples, a field-ion microscope for tip characterization, and a fully independent additional quick access low temperature scanning tunneling microscope (STM) and atomic force microscope (AFM) system. To characterize the system, we present the cooling performance of the DR, vibrational, tunneling current, and tip-sample displacement noise measurements. In addition, we show the spectral resolution capabilities with tunneling spectroscopy results obtained on an epitaxial graphene sample resolving the quantum Landau levels in a magnetic field, including the sublevels corresponding to the lifting of the electron spin and valley degeneracies.

  4. High Resolution Imaging of Satellites with Ground-Based 10-m Astronomical Telescopes

    SciTech Connect

    Marois, C

    2007-01-04

    High resolution imaging of artificial satellites can play an important role in current and future space endeavors. One such use is acquiring detailed images that can be used to identify or confirm damage and aid repair plans. It is shown that a 10-m astronomical telescope equipped with an adaptive optics system (AO) to correct for atmospheric turbulence using a natural guide star can acquire high resolution images of satellites in low-orbits using a fast shutter and a near-infrared camera even if the telescope is not capable of tracking satellites. With the telescope pointing towards the satellite projected orbit and less than 30 arcsec away from a guide star, multiple images of the satellite are acquired on the detector using the fast shutter. Images can then be shifted and coadded by post processing to increase the satellite signal to noise ratio. Using the Keck telescope typical Strehl ratio and anisoplanatism angle as well as a simple diffusion/reflection model for a satellite 400 km away observed near Zenith at sunset or sunrise, it is expected that such system will produced > 10{sigma} K-band images at a resolution of 10 cm inside a 60 arcsec diameter field of view. If implemented, such camera could deliver the highest resolution satellite images ever acquired from the ground.

  5. Realization of a 10M/100Mbps CMOS monolithic optical receiver

    NASA Astrophysics Data System (ADS)

    Yan, Huangping; Li, Jifang; Cheng, Xiang; Lu, Jing; Huang, Yuanqing; Chen, Chao

    2009-11-01

    A monolithic optical receiver fabricated in standard 0.5μm CMOS process is presented. The fingered doublephotodetector with structure of P+/N-well and N-well/P-substrate is designed. Some critical characteristics of doublephotodetector are analyzed in detail. At 2.5V reverse voltage, the maximum dark current is 10 pA. The intrinsic cut-off frequency is above 100MHz. The measured and simulated responsivity is 0.04A/W and 0.03A/W at 850nm wavelength, respectively. In the testing of double-photodetector, the minimum and maximum of rise time is 2.67ns and 7.11ns while the minimum and maximum of fall time is 2.67ns and 31.78ns. A Spice model of DPD is established for the compatibledesign of OEIC. In simulation of pre-amplifier circuit, the pass-band gain is approximate 18.8 KΩ. The lower cut-off frequency is 7KHz while the upper cut-off frequency is 700MHz. The simulated eye diagram of OEIC at 100Mbps is featured of clear trace, wide eye-opening and small zero-crossing distortion. The small signal bandwidth of OEIC is about 54MHz. The eye diagram at 50Mbps and 250Mbps has some distortion due to direct current malajustment. In the point-to-point optical interconnection, the transmission bit rate of 72Mbps is achieved. The monolithic optical receiver can be applied in 10M/100Mbps optical data transmission.

  6. Radial velocities with CRIRES. Pushing precision down to 5-10 m/s

    NASA Astrophysics Data System (ADS)

    Figueira, P.; Pepe, F.; Melo, C. H. F.; Santos, N. C.; Lovis, C.; Mayor, M.; Queloz, D.; Smette, A.; Udry, S.

    2010-02-01

    With the advent of high-resolution infrared spectrographs, radial relocity (RV) searches enter into a new domain. As of today, the most important technical question to address is which wavelength reference is the most suitable for high-precision RV measurements. In this work we use atmospheric absorption features as wavelength reference on CRIRES data obtained on two programs and three different targets. We analyzed the data from the TW Hya campaign again, reaching a dispersion of about 6 m/s on the RV standard on a time scale of roughly 1 week. We confirm that there is a low-amplitude RV signal on TW Hya itself, with an amplitude roughly 3 times smaller than the one reported at visible wavelengths. We present RV measurements of Gl 86 as well, showing that our approach is capable of detecting the signal induced by a planet and correctly quantifying it. Our data show that CRIRES is capable of reaching an RV precision of less than 10 m/s on a time scale of one week. The limitations of this particular approach are discussed, along with the limiting factors on RV precision in the IR in a general way. The implications of this work on the design of future dedicated IR spectrographs are addressed as well. Based on observations taken at the VLT (Paranal), under programs 280.C-5064(A) and 60.A-9051(A), and with the CORALIE spectrograph at the Euler Swiss telescope (La Silla). Tables 2 and 3 are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/511/A55

  7. Monocular Elevation Deficiency - Double Elevator Palsy

    MedlinePlus

    ... Eye Terms Conditions Frequently Asked Questions Español Condiciones Chinese Conditions Monocular Elevation Deficiency/ Double Elevator Palsy En Español Read in Chinese What is monocular elevation deficiency (Double Elevator Palsy)? ...

  8. Terrain synthesis from digital elevation models.

    PubMed

    Zhou, Howard; Sun, Jie; Turk, Greg; Rehg, James M

    2007-01-01

    In this paper, we present an example-based system for terrain synthesis. In our approach, patches from a sample terrain (represented by a height field) are used to generate a new terrain. The synthesis is guided by a user-sketched feature map that specifies where terrain features occur in the resulting synthetic terrain. Our system emphasizes large-scale curvilinear features (ridges and valleys) because such features are the dominant visual elements in most terrains. Both the example height field and user's sketch map are analyzed using a technique from the field of geomorphology. The system finds patches from the example data that match the features found in the user's sketch. Patches are joined together using graph cuts and Poisson editing. The order in which patches are placed in the synthesized terrain is determined by breadth-first traversal of a feature tree and this generates improved results over standard raster-scan placement orders. Our technique supports user-controlled terrain synthesis in a wide variety of styles, based upon the visual richness of real-world terrain data.

  9. Intra- and Inter-Seasonal Supra-glacial Water Variability over the West Greenland Ice Sheet as Estimated from Combining High Resolution Satellite Optical Data and a Digital Elevation Model

    NASA Astrophysics Data System (ADS)

    Brown, M. G.; Tedesco, M.; Smith, L. C.; Rennermalm, A. K.; Yang, K.

    2015-12-01

    The supra-glacial hydrology of the Greenland Ice Sheet (GrIS) plays a crucial role on the surface energy and mass balance budgets of the ice sheet as a whole. The surface hydrology network variability of small streams in the ablation zone of Greenland is poorly understood both spatially and temporally. Using satellites that can spatially resolve the presence and associated properties of small streams, the scientific community is now able to be provided with accurate spatial and temporal analysis of surface hydrology on the ice sheet (that could not have been resolved with other sensors such as those on board MODIS or LANDSAT). In this study we report mapped supra-glacial water networks over a region of the West GrIS (approximately 164 km2) derived from high resolution multispectral satellite imagery from the Quickbird and WorldView - 2 satellites in tandem with a 2 meter stereographic SETSM DEM (digital elevation model). The branching complexity of the identified surface streams is computed from the available DEM as well as the intra- and inter seasonal changes observed in the hydrological system. The stream networks created during the melt season (at several different stages of melting) are compared and discussed as well as the networks mapped between consecutive years for proximate dates. Also, depth and volume estimations for the surface water features identified were extracted via band math algorithms, threshold classifications, and morphological operations. Our results indicate that the higher stream orders have the largest amount of stored surface water per km but the lower stream orders, specifically 1st order with widths of ~ 2 meters, hold more stored surface water overall. We also employ and compare runoff data from the numerical model MAR (Modèle Atmosphérique Régional) to the estimations found using imagery and the DEM.

  10. a New High-Resolution Elevation Model of Greenland Derived from Tandem-X

    NASA Astrophysics Data System (ADS)

    Wessel, B.; Bertram, A.; Gruber, A.; Bemm, S.; Dech, S.

    2016-06-01

    In this paper we present for the first time the new digital elevation model (DEM) for Greenland produced by the TanDEM-X (TerraSAR add-on for digital elevation measurement) mission. The new, full coverage DEM of Greenland has a resolution of 0.4 arc seconds corresponding to 12 m. It is composed of more than 7.000 interferometric synthetic aperture radar (InSAR) DEM scenes. X-Band SAR penetrates the snow and ice pack by several meters depending on the structures within the snow, the acquisition parameters, and the dielectricity constant of the medium. Hence, the resulting SAR measurements do not represent the surface but the elevation of the mean phase center of the backscattered signal. Special adaptations on the nominal TanDEM-X DEM generation are conducted to maintain these characteristics and not to raise or even deform the DEM to surface reference data. For the block adjustment, only on the outer coastal regions ICESat (Ice, Cloud, and land Elevation Satellite) elevations as ground control points (GCPs) are used where mostly rock and surface scattering predominates. Comparisons with ICESat data and snow facies are performed. In the inner ice and snow pack, the final X-Band InSAR DEM of Greenland lies up to 10 m below the ICESat measurements. At the outer coastal regions it corresponds well with the GCPs. The resulting DEM is outstanding due to its resolution, accuracy and full coverage. It provides a high resolution dataset as basis for research on climate change in the arctic.

  11. Elevation changes

    USGS Publications Warehouse

    Jayko, A. S.; Marshall, G.A.; Carver, G.A.

    1992-01-01

    Elevation changes, as well as horizontal displacements of the Earth's surface, are an expected consequence of dip-slip displacement on earthquake faults. the rock surrounding and overlying the fault is forced to stretch and bend to accommodate fault slip. Slip in the case of the April 25 mainshock is thought to have occurred on a gently inclined plane dipping to the northeast at a small angle (see article on preliminary seismological results in this issue).The associated fault-plane solution implies that rock overlying the fault plane (the hanging-wall block west and south of the epicenter) rose and shifted to the northeast. The map on the next page shows the location of the epicenter and approximate extent of uplift and subsidence derived from estimates of the geometry, location. and slip on the buried fault plane. 

  12. High-resolution digital elevation dataset for Crater Lake National Park and vicinity, Oregon, based on LiDAR survey of August-September 2010 and bathymetric survey of July 2000

    USGS Publications Warehouse

    Robinson, Joel E.

    2012-01-01

    Crater Lake partially fills the caldera that formed approximately 7,700 years ago during the eruption of a 12,000-foot volcano known as Mount Mazama. The caldera-forming or climactic eruption of Mount Mazama devastated the surrounding landscape, left a thick deposit of pumice and ash in adjacent valleys, and spread a blanket of volcanic ash as far away as southern Canada. Because the Crater Lake region is potentially volcanically active, knowledge of past events is important to understanding hazards from future eruptions. Similarly, because the area is seismically active, documenting and evaluating geologic faults is critical to assessing hazards from earthquakes. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne LiDAR (Light Detection And Ranging) data collection at several volcanoes in the Cascade Range through the Oregon LiDAR Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon LiDAR Consortium contracted with Watershed Sciences, Inc., to conduct the data collection surveys. Collaborating agencies participating with the Oregon LiDAR Consortium for data collection in the Crater Lake region include Crater Lake National Park (National Park Service) and the Federal Highway Administration. In the immediate vicinity of Crater Lake National Park, 798 square kilometers of LiDAR data were collected, providing a digital elevation dataset of the ground surface beneath forest cover with an average resolution of 1.6 laser returns/m2 and both vertical and horizontal accuracies of ±5 cm. The LiDAR data were mosaicked in this report with bathymetry of the lake floor of Crater Lake, collected in 2000 using high-resolution multibeam sonar in a collaborative effort between the U.S. Geological Survey, Crater Lake National Park, and the Center for Coastal and Ocean Mapping at the University of New Hampshire. The bathymetric survey

  13. Digital terrain tapes: user guide

    USGS Publications Warehouse

    ,

    1980-01-01

    DMATC's digital terrain tapes are a by-product of the agency's efforts to streamline the production of raised-relief maps. In the early 1960's DMATC developed the Digital Graphics Recorder (DGR) system that introduced new digitizing techniques and processing methods into the field of three-dimensional mapping. The DGR system consisted of an automatic digitizing table and a computer system that recorded a grid of terrain elevations from traces of the contour lines on standard topographic maps. A sequence of computer accuracy checks was performed and then the elevations of grid points not intersected by contour lines were interpolated. The DGR system produced computer magnetic tapes which controlled the carving of plaster forms used to mold raised-relief maps. It was realized almost immediately that this relatively simple tool for carving plaster molds had enormous potential for storing, manipulating, and selectively displaying (either graphically or numerically) a vast number of terrain elevations. As the demand for the digital terrain tapes increased, DMATC began developing increasingly advanced digitizing systems and now operates the Digital Topographic Data Collection System (DTDCS). With DTDCS, two types of data elevations as contour lines and points, and stream and ridge lines are sorted, matched, and resorted to obtain a grid of elevation values for every 0.01 inch on each map (approximately 200 feet on the ground). Undefined points on the grid are found by either linear or or planar interpolation.

  14. A method for producing digital probabilistic seismic landslide hazard maps

    USGS Publications Warehouse

    Jibson, R.W.; Harp, E.L.; Michael, J.A.

    2000-01-01

    The 1994 Northridge, California, earthquake is the first earthquake for which we have all of the data sets needed to conduct a rigorous regional analysis of seismic slope instability. These data sets include: (1) a comprehensive inventory of triggered landslides, (2) about 200 strong-motion records of the mainshock, (3) 1:24 000-scale geologic mapping of the region, (4) extensive data on engineering properties of geologic units, and (5) high-resolution digital elevation models of the topography. All of these data sets have been digitized and rasterized at 10 m grid spacing using ARC/INFO GIS software on a UNIX computer. Combining these data sets in a dynamic model based on Newmark's permanent-deformation (sliding-block) analysis yields estimates of coseismic landslide displacement in each grid cell from the Northridge earthquake. The modeled displacements are then compared with the digital inventory of landslides triggered by the Northridge earthquake to construct a probability curve relating predicted displacement to probability of failure. This probability function can be applied to predict and map the spatial variability in failure probability in any ground-shaking conditions of interest. We anticipate that this mapping procedure will be used to construct seismic landslide hazard maps that will assist in emergency preparedness planning and in making rational decisions regarding development and construction in areas susceptible to seismic slope failure. ?? 2000 Elsevier Science B.V. All rights reserved.

  15. Evaluation of the U.S. Geological Survey standard elevation products in a two-dimensional hydraulic modeling application for a low relief coastal floodplain

    USGS Publications Warehouse

    Witt, Emitt C.

    2015-01-01

    Growing use of two-dimensional (2-D) hydraulic models has created a need for high resolution data to support flood volume estimates, floodplain specific engineering data, and accurate flood inundation scenarios. Elevation data are a critical input to these models that guide the flood-wave across the landscape allowing the computation of valuable engineering specific data that provides a better understanding of flooding impacts on structures, debris movement, bed scour, and direction. High resolution elevation data are becoming publicly available that can benefit the 2-D flood modeling community. Comparison of these newly available data with legacy data suggests that better modeling outcomes are achieved by using 3D Elevation Program (3DEP) lidar point data and the derived 1 m Digital Elevation Model (DEM) product relative to the legacy 3 m, 10 m, or 30 m products currently available in the U.S. Geological Survey (USGS) National Elevation Dataset. Within the low topographic relief of a coastal floodplain, the newer 3DEP data better resolved elevations within the forested and swampy areas achieving simulations that compared well with a historic flooding event. Results show that the 1 m DEM derived from 3DEP lidar source provides a more conservative estimate of specific energy, static pressure, and impact pressure for grid elements at maximum flow relative to the legacy DEM data. Better flood simulations are critically important in coastal floodplains where climate change driven storm frequency and sea level rise will contribute to more frequent flooding events.

  16. Evaluation of the U.S. Geological Survey standard elevation products in a two-dimensional hydraulic modeling application for a low relief coastal floodplain

    NASA Astrophysics Data System (ADS)

    Witt, Emitt C.

    2015-12-01

    Growing use of two-dimensional (2-D) hydraulic models has created a need for high resolution data to support flood volume estimates, floodplain specific engineering data, and accurate flood inundation scenarios. Elevation data are a critical input to these models that guide the flood-wave across the landscape allowing the computation of valuable engineering specific data that provides a better understanding of flooding impacts on structures, debris movement, bed scour, and direction. High resolution elevation data are becoming publicly available that can benefit the 2-D flood modeling community. Comparison of these newly available data with legacy data suggests that better modeling outcomes are achieved by using 3D Elevation Program (3DEP) lidar point data and the derived 1 m Digital Elevation Model (DEM) product relative to the legacy 3 m, 10 m, or 30 m products currently available in the U.S. Geological Survey (USGS) National Elevation Dataset. Within the low topographic relief of a coastal floodplain, the newer 3DEP data better resolved elevations within the forested and swampy areas achieving simulations that compared well with a historic flooding event. Results show that the 1 m DEM derived from 3DEP lidar source provides a more conservative estimate of specific energy, static pressure, and impact pressure for grid elements at maximum flow relative to the legacy DEM data. Better flood simulations are critically important in coastal floodplains where climate change driven storm frequency and sea level rise will contribute to more frequent flooding events.

  17. Corrosion Inhibition of Mild Steel in 1.0 M HCl by Amino Compound: Electrochemical and DFT Studies

    NASA Astrophysics Data System (ADS)

    Musa, Ahmed Y.; Mohamad, Abu Bakar; Kadhum, Abdul Amir H.; Takriff, Mohd Sobri

    2012-05-01

    The purpose of this study was to examine the inhibitory effect of 4-amino-5-methyl-4H-1, 2, 4-triazole-3-thiol (AMTT) on the corrosion of mild steel in 1.0 M HCl solution using weight loss, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization. The results indicate that AMTT performed as a good mixed-type inhibitor for mild steel corrosion in a 1.0 M HCl solution, and the inhibition efficiencies increased and tend to saturate with inhibitor concentration. Potentiodynamic polarization results showed that AMTT is a mixed-type inhibitor. Adsorption of AMTT molecules is a spontaneous process, and its adsorption behavior obeys Langmuir's adsorption isotherm model. The reactivity of AMTT was analyzed through theoretical calculations based on density functional theory. Results showed that the reactive sites were located on the nitrogen and sulfur (N1, N2, and S) atoms.

  18. Corrosion Inhibition of Mild Steel in 1.0 M HCl by Amino Compound: Electrochemical and DFT Studies

    NASA Astrophysics Data System (ADS)

    Musa, Ahmed Y.; Mohamad, Abu Bakar; Kadhum, Abdul Amir H.; Takriff, Mohd Sobri

    2012-09-01

    The purpose of this study was to examine the inhibitory effect of 4-amino-5-methyl-4H-1, 2, 4-triazole-3-thiol (AMTT) on the corrosion of mild steel in 1.0 M HCl solution using weight loss, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization. The results indicate that AMTT performed as a good mixed-type inhibitor for mild steel corrosion in a 1.0 M HCl solution, and the inhibition efficiencies increased and tend to saturate with inhibitor concentration. Potentiodynamic polarization results showed that AMTT is a mixed-type inhibitor. Adsorption of AMTT molecules is a spontaneous process, and its adsorption behavior obeys Langmuir's adsorption isotherm model. The reactivity of AMTT was analyzed through theoretical calculations based on density functional theory. Results showed that the reactive sites were located on the nitrogen and sulfur (N1, N2, and S) atoms.

  19. Digital Libraries.

    ERIC Educational Resources Information Center

    Fox, Edward A.; Urs, Shalini R.

    2002-01-01

    Provides an overview of digital libraries research, practice, and literature. Highlights include new technologies; redefining roles; historical background; trends; creating digital content, including conversion; metadata; organizing digital resources; services; access; information retrieval; searching; natural language processing; visualization;…

  20. Structures and Stabilities of the Metal Doped Gold Nano-Clusters: M@Au10 (M = W, Mo, Ru, Co)

    PubMed Central

    Hossain, Delwar; Pittman, Charles U.; Gwaltney, Steven R.

    2014-01-01

    The structures and stabilities of a series of endohedral gold clusters containing ten gold atoms M@Au10 (M = W, Mo, Ru, Co) have been determined using density functional theory. The gradient-corrected functional BP86, the Tao-Perdew-Staroverov-Scuseria TPSS meta-GGA functional, and the hybrid density functionals B3LYP and PBE1PBE were employed to calculate the structures, binding energies, adiabatic ionization potentials, and adiabatic electron affinities for these clusters. The LanL2DZ effective core potentials and the corresponding valence basis sets were employed. The M@Au10 (M = W, Mo, Ru, Co) clusters have higher binding energies than an empty Au10 cluster. In addition, the large HOMO–LUMO gaps suggest that the M@Au10 (M = W, Mo, Ru, Co) clusters are all likely to be stable chemically. The ionization potentials and electron affinities for these clusters are very high, and the W@Au10 and Mo@Au10 clusters have electron affinities similar to the super-halogen Al13. PMID:24611036

  1. Structures and Stabilities of the Metal Doped Gold Nano-Clusters: M@Au10 (M = W, Mo, Ru, Co).

    PubMed

    Hossain, Delwar; Pittman, Charles U; Gwaltney, Steven R

    2014-01-01

    The structures and stabilities of a series of endohedral gold clusters containing ten gold atoms M@Au10 (M = W, Mo, Ru, Co) have been determined using density functional theory. The gradient-corrected functional BP86, the Tao-Perdew-Staroverov-Scuseria TPSS meta-GGA functional, and the hybrid density functionals B3LYP and PBE1PBE were employed to calculate the structures, binding energies, adiabatic ionization potentials, and adiabatic electron affinities for these clusters. The LanL2DZ effective core potentials and the corresponding valence basis sets were employed. The M@Au10 (M = W, Mo, Ru, Co) clusters have higher binding energies than an empty Au10 cluster. In addition, the large HOMO-LUMO gaps suggest that the M@Au10 (M = W, Mo, Ru, Co) clusters are all likely to be stable chemically. The ionization potentials and electron affinities for these clusters are very high, and the W@Au10 and Mo@Au10 clusters have electron affinities similar to the super-halogen Al13. PMID:24611036

  2. Noninvasive allograft imaging of acute rejection: evaluation of (131)I-anti-CXCL10 mAb.

    PubMed

    Cheng, Dayan; Sun, Hukui; Liang, Ting; Zhang, Chao; Song, Jing; Hou, Guihua

    2015-02-01

    The purpose of this study was to investigate the use of iodine-131-labeled anti-CXCL10 mAb as tracer targeted at CXCL10 to detect acute rejection (AR) with mice model. Expression of CXCL10 was proved by RT-PCR, ELISA, and immunochemistry staining. All groups were submitted to whole-body autoradioimaging and ex vivo biodistribution studies after tail vein injection of (131)I-anti-CXCL10 mAb. The highest concentration/expression of CXCL10 was detected in allograft tissue compared with allograft treated with tacrolimus and isograft control. Tacrolimus could obviously inhibit the rejection of allograft. Allograft could be obviously imaged at all checking points, much clearer than the other two groups. The biodistribution results showed the highest uptake of radiotracer in allograft. T/NT (target/nontarget) ratio was 4.15 ± 0.25 at 72 h, apparently different from allograft treated with tacrolimus (2.29 ± 0.10), P < 0.05. These data suggest that CXCL10 is a promising target for early stage AR imaging and (131)I-CXCL10 mAb can successfully image AR and monitor the effect of immunosuppressant.

  3. Utility Towers, Insulator Detail, Front Elevation, Side Elevation, Elevation, Double ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Utility Towers, Insulator Detail, Front Elevation, Side Elevation, Elevation, Double Pole Tower, Single Pole Tower - La Bajada Historic Trails and Roads, Approximately 1 mile East/Northeast of intersection of State Highway 16 and Indian Service Road 841, La Bajada, Santa Fe County, NM

  4. Digital Preservation.

    ERIC Educational Resources Information Center

    Yakel, Elizabeth

    2001-01-01

    Reviews research on digital preservation issues, including born-digital and digitally recreated documents. Discusses electronic records research; metadata and other standards; electronic mail; Web-based documents; moving images media; selection of materials for digitization, including primary sources; administrative issues; media stability…

  5. Mars digital terrain model

    NASA Technical Reports Server (NTRS)

    Wu, Sherman S. C.; Howington, Annie-Elpis

    1987-01-01

    The Mars Digital Terrain Model (DTM) is the result of a new project to: (1) digitize the series of 1:2,000,000-scale topographic maps of Mars, which are being derived photogrammetically under a separate project, and (2) reformat the digital contour information into rasters of elevation that can be readily registered with the Digital Image Model (DIM) of Mars. Derivation of DTM's involves interpolation of elevation values into 1/64-degree resolution and transformation of them to a sinusoidal equal-area projection. Digital data are produced in blocks corresponding with the coordinates of the original 1:2,000,000-scale maps, i.e., the dimensions of each block in the equatorial belt are 22.5 deg of longitude and 15 deg of latitude. This DTM is not only compatible with the DIM, but it can also be registered with other data such as geologic units or gravity. It will be the most comprehensive record of topographic information yet compiled for the Martian surface. Once the DTM's are established, any enhancement of Mars topographic information made with updated data, such as data from the planned Mars Observer Mission, will be by mathematical transformation of the DTM's, eliminating the need for recompilation.

  6. Digital cartography of Mars

    NASA Technical Reports Server (NTRS)

    Batson, R. M.

    1987-01-01

    A medium-resolution Digital Image Model (DIM) of Mars is being compiled. A DIM is a mosaic of radiometrically corrected, photometrically modelled spacecraft images displaying accurate reflectance properties at uniform resolution, and geometrically tied to the best available control. The Mars medium-resolution DIM contains approximately 4700 Viking Orbiter image frames that were used to compile the recently completed 1:2,000,000-scale controlled photomosaic series of Mars. This DIM provides a planimetric control base to which all other Mars maps will be registered. A similar control base of topographic elevations (Digital Terrain Model, or DTM) is also being compiled. These products are scheduled for completion in 1989.

  7. National Digital Orthophoto Program

    USGS Publications Warehouse

    ,; ,; ,; ,; ,

    1996-01-01

    A critical component of the National Spatial Data Infrastructure (NSDI) is Framework. Framework provides a base on which to collect, register, and integrate geospatial information accurately and consistently. The Federal Geographic Data Committee (FGDC) proposed that Framework include geodetic control, orthoimagery, elevation, transportation, hydrography, governmental units, and cadastral data. The Mapping Science Committee of the National Research Council recommends that geodetic control, orthoimagery, and elevation data become the critical foundation of the NSDI. The National Digital Orthophoto Program (NDOP) is a working model on how Federal, State, and local government, as well as private industry, can participate to develop the orthoimagery Framework for the Nation.

  8. Elevated temperature biaxial fatigue

    NASA Technical Reports Server (NTRS)

    Jordan, E. H.

    1985-01-01

    A 3 year experimental program for studying elevated temperature biaxial fatigue of a nickel based alloy Hastelloy-X has been completed. A new high temperature fatigue test facility with unique capabilities has been developed. Effort was directed toward understanding multiaxial fatigue and correlating the experimental data to the existing theories of fatigue failure. The difficult task of predicting fatigue lives for nonproportional loading was used as an ultimate test for various life prediction methods being considered. The primary means of reaching improved understanding were through several critical nonproportional loading experiments. The direction of cracking observed on failed specimens was also recorded and used to guide the development of the theory. Cyclic deformation responses were permanently recorded digitally during each test. It was discovered that the cracking mode switched from primarily cracking on the maximum shear planes at room temperature to cracking on the maximum normal strain planes at 649 C. In contrast to some other metals, loading path in nonproportional loading had little effect on fatigue lives. Strain rate had a small effect on fatigue lives at 649 C. Of the various correlating parameters the modified plastic work and octahedral shear stress were the most successful.

  9. Utilization of Photo-Cross-Linkable Polymer for Mild Steel Corrosion Inhibition in 1.0 M HCl Medium

    NASA Astrophysics Data System (ADS)

    Baskar, R.; Gopiraman, M.; Kesavan, D.; Subramanian, K.; Gopalakrishnan, S.

    2015-08-01

    Novel biphenyl-based photo-cross-linkable polymers were synthesized and characterized by nuclear magnetic resonance and Fourier transform infrared spectroscopy. Upon UV irradiation, the polymers were cross-linked even in the absence of photo initiator or sensitizers, and the rate of photo-cross-linking was examined and discussed. The effectiveness of both virgin and cross-linked polymers for corrosion resistance on mild steel in 1.0 M hydrochloric acid medium was investigated, using polarization studies, electrochemical impedance measurements as well as by adsorption isotherm and surface analysis. The results clearly indicated a dramatic increase in the efficiency of inhibition of corrosion on mild steel by the photo-cross-linked polymer as compared to virgin polymers.

  10. SIM.EM-K3 Key comparison of 10 mH inductance standards at 1 kHz

    NASA Astrophysics Data System (ADS)

    Moreno, J. A.; Côté, M.; Koffman, A.; Castro, B. I.; Vasconcellos, R. de Barros e.; Kyriazis, G.; Cazabat, M.; Izquierdo, D.; Faverio, C.; Slomovitz, D.

    2016-01-01

    A key comparison of 10 mH inductance standards at 1 kHz has been carried out with the participation of seven National Metrology Institutes of the Inter-American Metrology System, within the frame of the International Committee for Weights and Measures Mutual Recognition Arrangement (MRA), which was piloted by CENAM, Mexico. Three previously characterized commercial inductors, contained in individual enclosures with controlled temperature were used as traveling standards. This document presents the results and technical details of the comparison. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCEM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  11. Digital Citizenship

    ERIC Educational Resources Information Center

    Isman, Aytekin; Canan Gungoren, Ozlem

    2014-01-01

    Era in which we live is known and referred as digital age.In this age technology is rapidly changed and developed. In light of these technological advances in 21st century, schools have the responsibility of training "digital citizen" as well as a good citizen. Digital citizens must have extensive skills, knowledge, Internet and …

  12. Digital Natives or Digital Tribes?

    ERIC Educational Resources Information Center

    Watson, Ian Robert

    2013-01-01

    This research builds upon the discourse surrounding digital natives. A literature review into the digital native phenomena was undertaken and found that researchers are beginning to identify the digital native as not one cohesive group but of individuals influenced by other factors. Primary research by means of questionnaire survey of technologies…

  13. Boric acid flux synthesis, structure and magnetic property of MB12O14(OH)10 (M=Mn, Fe, Zn)

    NASA Astrophysics Data System (ADS)

    Yang, Dingfeng; Cong, Rihong; Gao, Wenliang; Yang, Tao

    2013-05-01

    Three new borates MB12O14(OH)10 (M=Mn, Fe, Zn) have been synthesized by boric acid flux methods, which are isotypic to NiB12O14(OH)10. Single-crystal XRD was performed to determine the crystal structures in detail. They all crystallize in the monoclinic space group P21/c. The size of MO6 (M=Mg, Mn, Fe, Co, Ni, Zn) octahedron shows a good agreement with the Shannon effective ionic radii of M2+. Magnetic measurements indicate MnB12O14(OH)10 is antiferromagnetic without a long-range ordering down to 2 K. The values of its magnetic superexchange constants were evaluated by DFT calculations, which explain the observed magnetic behavior. The UV-vis diffuse reflectance spectrum of ZnB12O14(OH)10 suggests a band gap ˜4.6 eV. DFT calculations indicate it has a direct band gap 4.9 eV. The optical band gap is contributed by charge transfers from the occupied O 2p to the unoccupied Zn 4s states.

  14. 1. GREAT NORTHERN ELEVATORS. 1900 STEEL ELEVATOR WITH SQUARE BINS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. GREAT NORTHERN ELEVATORS. 1900 STEEL ELEVATOR WITH SQUARE BINS (AS OPPOSED) TO THE SIMILAR STEEL ELEVATOR IN BUFFALO NEW YORK WITH ROUND ELEVATOR BINS. - Great Northern Elevator "S", Saint Louis Bay, Superior, Douglas County, WI

  15. The Space Elevator

    NASA Astrophysics Data System (ADS)

    Laubscher, Bryan E.

    2005-09-01

    The Space Elevator is conceived to be a carbon nanotube ribbon stretching from an Earth station in the ocean on the equator to far beyond geosynchronous altitude. This elevator co-rotates with the Earth. Climbers ascend the ribbon using power beamed from Earth to launch spacecraft in orbit or to other worlds. The requirements of the ribbon material, challenges to the building of the space elevator, deployment and the promise of the space elevator are briefly discussed in this paper.

  16. National requirements for improved elevation data

    USGS Publications Warehouse

    Snyder, Gregory I.; Sugarbaker, Larry J.; Jason, Allyson L.; Maune, David F.

    2014-01-01

    This report presents the results of surveys, structured interviews, and workshops conducted to identify key national requirements for improved elevation data for the United States and its territories, including coastlines. Organizations also identified and reported the expected economic benefits that would be realized if their requirements for improved elevation were met (appendixes 1–3). This report describes the data collection methodology and summarizes the findings. Participating organizations included 34 Federal agencies, 50 States and two territories, and a sampling of local governments, tribes, and nongovernmental orgnizations. The nongovernmental organizations included The Nature Conservancy and a sampling of private sector businesses. These data were collected in 2010-2011 as part of the National Enhanced Elevation Assessment (NEEA), a study to identify program alternatives for better meeting the Nation’s elevation data needs. NEEA tasks included the collection of national elevation requirements; analysis of the benefits and costs of meeting these requirements; assessment of emerging elevation technologies, lifecycle data management needs, and costs for managing and distributing a national-scale dataset and derived products; and candidate national elevation program alternatives that balance costs and benefits in meeting the Nation’s elevation requirements. The NEEA was sponsored by the National Digital Elevation Program (NDEP), a government coordination body with the U.S. Geological Survey (USGS) as managing partner that includes the National Geospatial-Intelligence Agency (NGA), the Federal Emergency Management Agency (FEMA), the Natural Resources Conservation Service (NRCS), the U.S. Army Corps of Engineers (USACE), and the National Oceanic and Atmospheric Administration (NOAA), among the more than a dozen agencies and organizations. The term enhanced elevation data as used in this report refers broadly to three-dimensional measurements of land or

  17. HST luminosity functions of the globular clusters M10, M22, and M55. A comparison with other clusters

    NASA Astrophysics Data System (ADS)

    Piotto, G.; Zoccali, M.

    1999-05-01

    From a combination of deep Hubble Space Telescope V and I images with groundbased images in the same bands, we have obtained color-magnitude diagrams of M10, M22, and M55, extending from just above the hydrogen burning limit to the tip of the red giant branch, down to the white dwarf cooling sequence. We have used the color-magnitude arrays to extract main sequence luminosity functions (LFs) from the turnoff to m ~ 0.13m_sun. The LFs of M10 is significantly steeper than that for the other two clusters. The difference cannot be due to a difference in metallicity. A comparison with the LFs from Piotto et al. (1997), shows a large spread in the LF slopes. This spread is also present in the local mass functions (MFs) obtained from the observed LFs using different theoretical mass-luminosity relations. The dispersion in the MF slopes remains also after removing the mass segregation effects by using multimass King-Michie models. The globular cluster MF slopes are also flatter than the MF slope of the field stars and of the Galactic clusters in the same mass interval. We interpret the MF slope dispersion and the MF flatness as an evidence of dynamical evolution which makes the present day globular cluster stellar MFs different from the initial MFs. The slopes of the present day MFs exclude that the low mass star can be dynamically relevant for the Galactic globular clusters. Based on HST observations retrieved from the ESO ST-ECF Archive, and on observations made at the European Southern Observatory, La Silla, Chile, and at the JKT telescope at La Palma, Islas Canarias.

  18. B cells expressing IL-10 mRNA modulate memory T cells after DNA-Hsp65 immunization.

    PubMed

    Fontoura, I C; Trombone, A P F; Almeida, L P; Lorenzi, J C C; Rossetti, R A M; Malardo, T; Padilha, E; Schluchting, W; Silva, R L L; Gembre, A F; Fiuza, J E C; Silva, C L; Panunto-Castelo, A; Coelho-Castelo, A A M

    2015-12-01

    In DNA vaccines, the gene of interest is cloned into a bacterial plasmid that is engineered to induce protein production for long periods in eukaryotic cells. Previous research has shown that the intramuscular immunization of BALB/c mice with a naked plasmid DNA fragment encoding the Mycobacterium leprae 65-kDa heat-shock protein (pcDNA3-Hsp65) induces protection against M. tuberculosis challenge. A key stage in the protective immune response after immunization is the generation of memory T cells. Previously, we have shown that B cells capture plasmid DNA-Hsp65 and thereby modulate the formation of CD8+ memory T cells after M. tuberculosis challenge in mice. Therefore, clarifying how B cells act as part of the protective immune response after DNA immunization is important for the development of more-effective vaccines. The aim of this study was to investigate the mechanisms by which B cells modulate memory T cells after DNA-Hsp65 immunization. C57BL/6 and BKO mice were injected three times, at 15-day intervals, with 100 µg naked pcDNA-Hsp65 per mouse. Thirty days after immunization, the percentages of effector memory T (TEM) cells (CD4+ and CD8+/CD44high/CD62Llow) and memory CD8+ T cells (CD8+/CD44high/CD62Llow/CD127+) were measured with flow cytometry. Interferon γ, interleukin 12 (IL-12), and IL-10 mRNAs were also quantified in whole spleen cells and purified B cells (CD43-) with real-time qPCR. Our data suggest that a B-cell subpopulation expressing IL-10 downregulated proinflammatory cytokine expression in the spleen, increasing the survival of CD4+ TEM cells and CD8+ TEM/CD127+ cells. PMID:26397973

  19. B cells expressing IL-10 mRNA modulate memory T cells after DNA-Hsp65 immunization

    PubMed Central

    Fontoura, I. C.; Trombone, A.P.F.; Almeida, L. P.; Lorenzi, J. C. C.; Rossetti, R. A. M.; Malardo, T.; Padilha, E.; Schluchting, W.; Silva, R. L. L.; Gembre, A. F.; Fiuza, J. E. C.; Silva, C. L.; Panunto-Castelo, A.; Coelho-Castelo, A. A. M.

    2015-01-01

    In DNA vaccines, the gene of interest is cloned into a bacterial plasmid that is engineered to induce protein production for long periods in eukaryotic cells. Previous research has shown that the intramuscular immunization of BALB/c mice with a naked plasmid DNA fragment encoding the Mycobacterium leprae 65-kDa heat-shock protein (pcDNA3-Hsp65) induces protection against M. tuberculosis challenge. A key stage in the protective immune response after immunization is the generation of memory T cells. Previously, we have shown that B cells capture plasmid DNA-Hsp65 and thereby modulate the formation of CD8+ memory T cells after M. tuberculosis challenge in mice. Therefore, clarifying how B cells act as part of the protective immune response after DNA immunization is important for the development of more-effective vaccines. The aim of this study was to investigate the mechanisms by which B cells modulate memory T cells after DNA-Hsp65 immunization. C57BL/6 and BKO mice were injected three times, at 15-day intervals, with 100 µg naked pcDNA-Hsp65 per mouse. Thirty days after immunization, the percentages of effector memory T (TEM) cells (CD4+ and CD8+/CD44high/CD62Llow) and memory CD8+ T cells (CD8+/CD44high/CD62Llow/CD127+) were measured with flow cytometry. Interferon γ, interleukin 12 (IL-12), and IL-10 mRNAs were also quantified in whole spleen cells and purified B cells (CD43−) with real-time qPCR. Our data suggest that a B-cell subpopulation expressing IL-10 downregulated proinflammatory cytokine expression in the spleen, increasing the survival of CD4+ TEM cells and CD8+ TEM/CD127+ cells. PMID:26397973

  20. Evaluating DEM conditioning techniques, elevation source data, and grid resolution for field-scale hydrological parameter extraction

    NASA Astrophysics Data System (ADS)

    Woodrow, Kathryn; Lindsay, John B.; Berg, Aaron A.

    2016-09-01

    Although digital elevation models (DEMs) prove useful for a number of hydrological applications, they are often the end result of numerous processing steps that each contains uncertainty. These uncertainties have the potential to greatly influence DEM quality and to further propagate to DEM-derived attributes including derived surface and near-surface drainage patterns. This research examines the impacts of DEM grid resolution, elevation source data, and conditioning techniques on the spatial and statistical distribution of field-scale hydrological attributes for a 12,000 ha watershed of an agricultural area within southwestern Ontario, Canada. Three conditioning techniques, including depression filling (DF), depression breaching (DB), and stream burning (SB), were examined. The catchments draining to each boundary of 7933 agricultural fields were delineated using the surface drainage patterns modeled from LiDAR data, interpolated to a 1 m, 5 m, and 10 m resolution DEMs, and from a 10 m resolution photogrammetric DEM. The results showed that variation in DEM grid resolution resulted in significant differences in the spatial and statistical distributions of contributing areas and the distributions of downslope flowpath length. Degrading the grid resolution of the LiDAR data from 1 m to 10 m resulted in a disagreement in mapped contributing areas of between 29.4% and 37.3% of the study area, depending on the DEM conditioning technique. The disagreements among the field-scale contributing areas mapped from the 10 m LiDAR DEM and photogrammetric DEM were large, with nearly half of the study area draining to alternate field boundaries. Differences in derived contributing areas and flowpaths among various conditioning techniques increased substantially at finer grid resolutions, with the largest disagreement among mapped contributing areas occurring between the 1 m resolution DB DEM and the SB DEM (37% disagreement) and the DB-DF comparison (36.5% disagreement in mapped

  1. Digital printing

    NASA Astrophysics Data System (ADS)

    Sobotka, Werner K.

    1997-02-01

    Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

  2. Digital metamaterials.

    PubMed

    Della Giovampaola, Cristian; Engheta, Nader

    2014-12-01

    Balancing complexity and simplicity has played an important role in the development of many fields in science and engineering. One of the well-known and powerful examples of such balance can be found in Boolean algebra and its impact on the birth of digital electronics and the digital information age. The simplicity of using only two numbers, '0' and '1', in a binary system for describing an arbitrary quantity made the fields of digital electronics and digital signal processing powerful and ubiquitous. Here, inspired by the binary concept, we propose to develop the notion of digital metamaterials. Specifically, we investigate how one can synthesize an electromagnetic metamaterial with a desired permittivity, using as building blocks only two elemental materials, which we call 'metamaterial bits', with two distinct permittivity functions. We demonstrate, analytically and numerically, how proper spatial mixtures of such metamaterial bits lead to elemental 'metamaterial bytes' with effective material parameters that are different from the parameters of the metamaterial bits. We then apply this methodology to several design examples of optical elements, such as digital convex lenses, flat graded-index digital lenses, digital constructs for epsilon-near-zero (ENZ) supercoupling and digital hyperlenses, thus highlighting the power and simplicity of the methodology.

  3. Bright features in Neptune on 2013-2015 from ground-based observations with small (40 cm) and large telescopes (10 m)

    NASA Astrophysics Data System (ADS)

    Hueso, Ricardo; Delcroix, Marc; Baranec, Christoph; Sánchez-Lavega, Agustín; María Gómez-Forrellad, Josep; Félix Rojas, Jose; Luszcz-Cook, Statia; de Pater, Imke; de Kleer, Katherine; Colas, François; Guarro, Joan; Goczynski, Peter; Jones, Paul; Kivits, Willem; Maxson, Paul; Phillips, Michael; Sussenbach, John; Wesley, Anthony; Hammel, Heidi B.; Pérez-Hoyos, Santiago; Mendikoa, Iñigo; Riddle, Reed; Law, Nicholas M.; Sayanagi, Kunio

    2015-11-01

    Observations of Neptune over the last few years obtained with small telescopes (30-50 cm) have resulted in several detections of bright features on the planet. In 2013, 2014 and 2015, different observers have repeatedly observed features of high contrast at Neptune’s mid-latitudes using long-pass red filters. This success at observing Neptune clouds with such small telescopes is due to the presence of strong methane absorption bands in Neptune’s spectra at red and near infrared wavelengths; these bands provide good contrast for elevated cloud structures. In each case, the atmospheric features identified in the images survived at least a few weeks, but were essentially much more variable and apparently shorter-lived, than the large convective system recently reported on Uranus [de Pater et al. 2015]. The latest and brightest spot on Neptune was first detected on July 13th 2015 with the 2.2m telescope at Calar Alto observatory with the PlanetCam UPV/EHU instrument. The range of wavelengths covered by PlanetCam (from 350 nm to the H band including narrow-band and wide-band filters in and out of methane bands) allows the study of the vertical cloud structure of this bright spot. In particular, the spot is particularly well contrasted at the H band where it accounted to a 40% of the total planet brightness. Observations obtained with small telescopes a few days later provide a good comparison that can be used to scale similar structures in 2013 and 2014 that were observed with 30-50 cm telescopes and the Robo-AO instrument at Palomar observatory. Further high-resolution observations of the 2015 event were obtained in July 25th with the NIRC2 camera in the Keck 2 10-m telescope. These images show the bright spot as a compact bright feature in H band with a longitudinal size of 8,300 km and a latitudinal extension of 5,300 km, well separated from a nearby bright band. The ensemble of observations locate the structure at -41º latitude drifting at about +24.27º/day or

  4. Digital Discrimination

    ERIC Educational Resources Information Center

    Blansett, Jim

    2008-01-01

    In recent years, the Internet has become a digital commons of commerce and education. However, accessibility standards have often been overlooked online, and the digital equivalents to curb-cuts and other physical accommodations have only rarely been implemented to serve those with print disabilities. (A print disability can be a learning…

  5. Digitizing Preservation.

    ERIC Educational Resources Information Center

    Conway, Paul

    1994-01-01

    Discussion of digital imaging technology focuses on its potential use for preservation of library materials. Topics addressed include converting microfilm to digital; the high cost of conversion from paper or microfilm; quality; indexing; database management issues; incompatibility among imaging systems; longevity; cooperative pilot projects; and…

  6. Digital Roundup

    ERIC Educational Resources Information Center

    Horn, Michael B.

    2013-01-01

    State policy is crucial to the spread of digital-learning opportunities at the elementary and secondary level. A review of recent legislative action reveals policies that are constantly in flux and differ quite markedly from one state to another. Some have hoped for model digital-learning legislation that could handle all the various issues…

  7. Digital TMI

    NASA Technical Reports Server (NTRS)

    Rios, Joseph

    2012-01-01

    Presenting the current status of the Digital TMI project to visiting members of the FAA Command Center. Digital TMI is an effort to store national-level traffic management initiatives in a standards-compliant manner. Work is funded by the FAA.

  8. Elevation Map of Kathmandu, Nepal

    NASA Technical Reports Server (NTRS)

    2002-01-01

    These Shuttle Radar Topgraphy Mission (SRTM) images show the basin of Kathmandu, the capital of Nepal: On the left a detail (27 km x 20.5 km) of the X-SAR digital elevation model (shown below), on the right the corresponding radar amplitude image. The amplitude is a measure of the backscattering of the transmitted microwaves. In the amplitude image the 'Bagmati-River' is visible south of the city center and the international Airport in the eastern part. The runway appears as a dark stripe. The airport is infamous for its difficult landing/takeoff conditions due to the close vicinity of the surrounding high mountains. For more information and a image of the region around Kathmandu, visit the German Remote Sensing Data Center SRTM Treasure Vault. Image courtesy German Remote Sensing Data Center

  9. Validation Of DEM Data Dvied From World View 3 Stero Imagery For Low Elevation Majuro Atoll, Marchall Islands

    EPA Science Inventory

    The availability of surface elevation data for the Marshall Islands has been identified as a "massive" data gap for conducting vulnerability assessments and the subsequent development of climate change adaption strategies. Specifically, digital elevation model (DEM) data are nee...

  10. Long periods (1 -10 mHz) geomagnetic pulsations variation with solar cycle in South Atlantic Magnetic Anomaly

    NASA Astrophysics Data System (ADS)

    Rigon Silva, Willian; Schuch, Nelson Jorge; Guimarães Dutra, Severino Luiz; Babulal Trivedi, Nalin; Claudir da Silva, Andirlei; Souza Savian, Fernando; Ronan Coelho Stekel, Tardelli; de Siqueira, Josemar; Espindola Antunes, Cassio

    The occurrence and intensity of the geomagnetic pulsations Pc-5 (2-7 mHz) and its relationship with the solar cycle in the South Atlantic Magnetic Anomaly -SAMA is presented. The study of geomagnetic pulsations is important to help the understanding of the physical processes that occurs in the magnetosphere region and help to predict geomagnetic storms. The fluxgate mag-netometers H, D and Z, three axis geomagnetic field data from the Southern Space Observatory -SSO/CRS/INPE -MCT, São Martinho da Serra (29.42° S, 53.87° W, 480m a.s.l.), RS, Brasil, a were analyzed and correlated with the solar wind parameters (speed, density and temperature) from the ACE and SOHO satellites. A digital filtering to enhance the 2-7 mHz geomagnetic pulsations was used. Five quiet days and five perturbed days in the solar minimum and in the solar maximum were selected for this analysis. The days were chosen based on the IAGA definition and on the Bartels Musical Diagrams (Kp index) for 2001 (solar maximum) and 2008 (solar minimum). The biggest Pc-5 amplitude averages differences between the H-component is 78,35 nT for the perturbed days and 1,60nT for the quiet days during the solar maximum. For perturbed days the average amplitude during the solar minimum is 8,32 nT, confirming a direct solar cycle influence in the geomagnetic pulsations intensity for long periods.

  11. 54. West elevation of portion of elevated Mainline structure (Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. West elevation of portion of elevated Mainline structure (Section F-5) over Washington Street - looking East - at the corner of Bray Street. - Boston Elevated Railway, Elevated Mainline, Washington Street, Boston, Suffolk County, MA

  12. Ice elevations and surface change on the Malaspina Glacier, Alaska

    USGS Publications Warehouse

    Sauber, J.; Molnia, B.; Carabajal, C.; Luthcke, S.; Muskett, R.

    2005-01-01

    Here we use Ice, Cloud and land Elevation Satellite (ICESat)-derived elevations and surface characteristics to investigate the Malaspina Glacier of southern Alaska. Although there is significant elevation variability between ICESat tracks on this glacier, we were able to discern general patterns in surface elevation change by using a regional digital elevation model (DEM) as a reference surface. Specifically, we report elevation differences between ICESat Laser 1-3 observations (February 2003 - November 2004) and a Shuttle Radar Topography Mission (SRTM)-derived DEM from February 2000. Elevation decreases of up to 20-25 m over a 3-4 year time period were observed across the folded loop moraine on the southern portion of the Malaspina Glacier. Copyright 2005 by the American Geophysical Union.

  13. Use of the ER-2 and IFSAR for digital terrain matrix, difference digital terrain matrix, and vector difference digital terrain matrix collection

    SciTech Connect

    Malliot, H.A.

    1996-10-01

    A national digital terrain matrix (DTM) archive with sub-meter elevation precision and three meter or less post spacing will have numerous commercial government and research uses. The Lockheed Martin Missiles and Space Digital Terrain Elevation Mapping System (DTEMS) will be used to collect a DTM archive with average relative one {sigma} elevation precision of 0.3 meter, average absolute one U elevation precision less than 0.6 meter, and one to three meter post spacing (posting). DTEMS data will satisfy National Map Accuracy Standards (NMAS) contour intervals of one to two meters. DTEMS will also archive orth-rectified digital polarimetric synthetic aperture radar (SAR) imagery with one to three meter resolution. A difference digital terrain matrix (DDTM) is defined as a digital data file containing elevation changes in a DTM. A DDTM archive will be useful for detection and measurement of natural or man made changes in terrain elevation. Using DTEMS to make periodic repeat DTM collections and coherent elevation change detection (CECD) to sense small elevation changes, DTEMS will be capable of resolving elevation changes of a few centimeters. A vector difference digital terrain matrix (VDDTM) is defined as a digital data file containing the X, Y and Z displacements of the ground. Using CECD with a sub-pixel digital image correlation (SPDIC) technique on pairs of DTM`s and radar images collected by DTEMS, it will be possible to measure X and Y ground displacements with resolutions of ten centimeters at posts with spacing of ten meters and measure the elevation (Z) displacement with a resolution of a few centimeters. 8 refs., 6 figs.

  14. Digital Epidemiology

    PubMed Central

    Salathé, Marcel; Bengtsson, Linus; Bodnar, Todd J.; Brewer, Devon D.; Brownstein, John S.; Buckee, Caroline; Campbell, Ellsworth M.; Cattuto, Ciro; Khandelwal, Shashank; Mabry, Patricia L.; Vespignani, Alessandro

    2012-01-01

    Mobile, social, real-time: the ongoing revolution in the way people communicate has given rise to a new kind of epidemiology. Digital data sources, when harnessed appropriately, can provide local and timely information about disease and health dynamics in populations around the world. The rapid, unprecedented increase in the availability of relevant data from various digital sources creates considerable technical and computational challenges. PMID:22844241

  15. Digital Collections, Digital Libraries & the Digitization of Cultural Heritage Information.

    ERIC Educational Resources Information Center

    Lynch, Clifford

    2002-01-01

    Discusses digital collections and digital libraries. Topics include broadband availability; digital rights protection; content, both non-profit and commercial; digitization of cultural content; sustainability; metadata harvesting protocol; infrastructure; authorship; linking multiple resources; data mining; digitization of reference works;…

  16. Digital image transformation and rectification of spacecraft and radar images

    NASA Technical Reports Server (NTRS)

    Wu, S. S. C.

    1985-01-01

    The application of digital processing techniques to spacecraft television pictures and radar images is discussed. The use of digital rectification to produce contour maps from spacecraft pictures is described; images with azimuth and elevation angles are converted into point-perspective frame pictures. The digital correction of the slant angle of radar images to ground scale is examined. The development of orthophoto and stereoscopic shaded relief maps from digital terrain and digital image data is analyzed. Digital image transformations and rectifications are utilized on Viking Orbiter and Lander pictures of Mars.

  17. National Enhanced Elevation Assessment at a glance

    USGS Publications Warehouse

    Snyder, Gregory I.

    2012-01-01

    Elevation data are essential for hazards mitigation, conservation, infrastructure development, national security, and many other applications. Under the leadership of the U.S. Geological Survey and the member States of the National Digital Elevation Program (NDEP), Federal agencies, State agencies, and others work together to acquire high-quality elevation data for the United States and its territories. New elevation data are acquired using modern technology to replace elevation data that are, on average, more than 30 years old. Through the efforts of the NDEP, a project-by-project data acquisition approach resulted in improved, publicly available data for 28 percent of the conterminous United States and 15 percent of Alaska over the past 15 years. Although the program operates efficiently, the rate of data collection and the typical project specifications are currently insufficient to address the needs of government, the private sector, and other organizations. The National Enhanced Elevation Assessment was conducted to (1) document national-level requirements for improved elevation data, (2) estimate the benefits and costs of meeting those requirements, and (3) evaluate multiple national-level program-implementation scenarios. The assessment was sponsored by the NDEP's member agencies. The study participants came from 34 Federal agencies, agencies from all 50 States, selected local government and Tribal offices, and private and not-for-profit organizations. A total of 602 mission-critical activities were identified that need significantly more accurate data than are currently available. The results of the assessment indicate that a national-level enhanced-elevation-data program has the potential to generate from $1.2 billion to $13 billion in new benefits annually.

  18. A method for producing digital probabilistic seismic landslide hazard maps; an example from the Los Angeles, California, area

    USGS Publications Warehouse

    Jibson, Randall W.; Harp, Edwin L.; Michael, John A.

    1998-01-01

    The 1994 Northridge, California, earthquake is the first earthquake for which we have all of the data sets needed to conduct a rigorous regional analysis of seismic slope instability. These data sets include (1) a comprehensive inventory of triggered landslides, (2) about 200 strong-motion records of the mainshock, (3) 1:24,000-scale geologic mapping of the region, (4) extensive data on engineering properties of geologic units, and (5) high-resolution digital elevation models of the topography. All of these data sets have been digitized and rasterized at 10-m grid spacing in the ARC/INFO GIS platform. Combining these data sets in a dynamic model based on Newmark's permanent-deformation (sliding-block) analysis yields estimates of coseismic landslide displacement in each grid cell from the Northridge earthquake. The modeled displacements are then compared with the digital inventory of landslides triggered by the Northridge earthquake to construct a probability curve relating predicted displacement to probability of failure. This probability function can be applied to predict and map the spatial variability in failure probability in any ground-shaking conditions of interest. We anticipate that this mapping procedure will be used to construct seismic landslide hazard maps that will assist in emergency preparedness planning and in making rational decisions regarding development and construction in areas susceptible to seismic slope failure.

  19. [Elevated gastric lesions].

    PubMed

    de Careaga, B; Villagómez, G; Pabón, J; Calderón, O; Elío, D; Pérez, J; Martínez, M; Patiño, F; Ponce, R; Lora, J

    1986-01-01

    Elevated gastric lesions, represent an important group among gastric pathology. To establish its incidence in our experience, we studied the endoscopic reports of two important hospitals in La Paz city: Instituto de Gastroenterología Boliviano Japonés and Hospital Obrero No. 1. In order to make a good endoscopic diagnosis among different elevated lesions we use some parameters like: location, shape, size, diameter, surface of the lesion and surrounding mucosa and characteristics of the falls. 10.472 endoscopic reports were reviewed, 497 elevated gastric lesions were found, 475 corresponded to mucosal lesions (352 benign lesions and 123 malignant lesions), 11 to submucosal and 11 extragastric lesions.

  20. Digital Radiography

    NASA Technical Reports Server (NTRS)

    1986-01-01

    System One, a digital radiography system, incorporates a reusable image medium (RIM) which retains an image. No film is needed; the RIM is read with a laser scanner, and the information is used to produce a digital image on an image processor. The image is stored on an optical disc. System allows the radiologist to "dial away" unwanted images to compare views on three screens. It is compatible with existing equipment and cost efficient. It was commercialized by a Stanford researcher from energy selective technology developed under a NASA grant.

  1. Light: Isometric Casing with Lens, South Elevation, North Elevation, Top ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Light: Isometric Casing with Lens, South Elevation, North Elevation, Top Plan, Base Plan; Fresnel Lens: Isometric, Elevation, Plan - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  2. Digital Batteries

    NASA Astrophysics Data System (ADS)

    Hubler, Alfred

    2009-03-01

    The energy density in conventional capacitors is limited by sparking. We present nano-capacitor arrays, where - like in laser diodes and quantum wells [1] - quantization prevents dielectric breakthrough. We show that the energy density and the power/weight ratio are very high, possibly larger than in hydrogen [2]. Digital batteries are a potential clean energy source for cars, laptops, and mobile devices. The technology is related to flash drives. However, because of the high energy density, safety is a concern. Digital batteries can be easily and safely charged and discharged. In the discharged state they pose no danger. Even if a charged digital battery were to explode, it would produce no radioactive waste, no long-term radiation, and probably could be designed to produce no noxious chemicals. We discuss methodologies to prevent shorts and other measures to make digital batteries safe. [1] H. Higuraskh, A. Toriumi, F. Yamaguchi, K. Kawamura, A. Hubler, Correlation Tunnel Device, U. S. Patent No. 5,679,961 (1997) [2] Alfred Hubler, http://server10.how-why.com/blog/

  3. Digital Badges

    ERIC Educational Resources Information Center

    Frederiksen, Linda

    2013-01-01

    Unlike so much of the current vocabulary in education and technology that seems to stir more confusion than clarity, most public service librarians may already have a general idea about digital badges. As visual representations of individual accomplishments, competencies or skills that are awarded by groups, institutions, or organizations, they…

  4. Digital Tidbits

    ERIC Educational Resources Information Center

    Kumaran, Maha; Geary, Joe

    2011-01-01

    Technology has transformed libraries. There are digital libraries, electronic collections, online databases and catalogs, ebooks, downloadable books, and much more. With free technology such as social websites, newspaper collections, downloadable online calendars, clocks and sticky notes, online scheduling, online document sharing, and online…

  5. Geometric rectification of radar imagery using digital elevation models

    NASA Technical Reports Server (NTRS)

    Naraghi, M.; Stromberg, W.; Daily, M.

    1983-01-01

    Geologic analysis of radar imagery requires accurate spatial rectification to allow rock type discrimination and meaningful exploitation of multisensor data files. A procedure is described which removes distortions produced by most sources including the heretofore elusive problem of terrain induced effects. Rectified imagery is presented which displays geologic features not apparent in the distorted data.

  6. Time course and cellular localization of interleukin-10 mRNA and protein expression in autoimmune inflammation of the rat central nervous system.

    PubMed Central

    Jander, S.; Pohl, J.; D'Urso, D.; Gillen, C.; Stoll, G.

    1998-01-01

    Experimental autoimmune encephalomyelitis of the Lewis rat is a T-cell-mediated autoimmune disease of the central nervous system characterized by a self-limiting monophasic course. In this study, we analyzed the expression of the anti-inflammatory cytokine interleukin (IL)-10 at the mRNA and protein level in experimental autoimmune encephalomyelitis actively induced with the encephalitogenic 68-86 peptide of guinea pig myelin basic protein. Semiquantitative reverse transcriptase-polymerase chain reaction revealed that IL-10 mRNA expression peaked during the acute phase of the disease at days 11 and 13. IL-10 mRNA was synchronously induced with mRNA for the proinflammatory cytokine interferon-gamma. Immunocytochemistry with a monoclonal antibody against rat IL-10 showed that the peak of IL-10 mRNA was accompanied by an abundant expression of IL-10 protein during the acute stage of the disease. Both in situ hybridization and double labeling immunocytochemistry in combination with confocal microscopy identified T cells, macrophages/microglia, and astrocytes as major cellular sources of IL-10 in vivo. The early peak of IL-10 production was unexpected in light of its well-documented anti-inflammatory properties. Additional studies are required to determine whether endogenous IL-10 contributes to rapid clinical remission typical for Lewis rat experimental autoimmune encephalomyelitis or if it plays other, yet undefined, roles in central nervous system autoimmunity. Images Figure 1 Figure 2 Figure 3 Figure 4 PMID:9546358

  7. National Elevation Dataset

    USGS Publications Warehouse

    ,

    2002-01-01

    The National Elevation Dataset (NED) is a new raster product assembled by the U.S. Geological Survey. NED is designed to provide National elevation data in a seamless form with a consistent datum, elevation unit, and projection. Data corrections were made in the NED assembly process to minimize artifacts, perform edge matching, and fill sliver areas of missing data. NED has a resolution of one arc-second (approximately 30 meters) for the conterminous United States, Hawaii, Puerto Rico and the island territories and a resolution of two arc-seconds for Alaska. NED data sources have a variety of elevation units, horizontal datums, and map projections. In the NED assembly process the elevation values are converted to decimal meters as a consistent unit of measure, NAD83 is consistently used as horizontal datum, and all the data are recast in a geographic projection. Older DEM's produced by methods that are now obsolete have been filtered during the NED assembly process to minimize artifacts that are commonly found in data produced by these methods. Artifact removal greatly improves the quality of the slope, shaded-relief, and synthetic drainage information that can be derived from the elevation data. Figure 2 illustrates the results of this artifact removal filtering. NED processing also includes steps to adjust values where adjacent DEM's do not match well, and to fill sliver areas of missing data between DEM's. These processing steps ensure that NED has no void areas and artificial discontinuities have been minimized. The artifact removal filtering process does not eliminate all of the artifacts. In areas where the only available DEM is produced by older methods, then "striping" may still occur.

  8. 60. FORWARD AIRPLANE ELEVATOR PIT WITH ELEVATOR IN RAISED POSITION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    60. FORWARD AIRPLANE ELEVATOR PIT WITH ELEVATOR IN RAISED POSITION AFT LOOKING FORWARD ON CENTERLINE SHOWING ELEVATOR GUIDES, WIREWAYS, SHEAVES, HYDRAULIC OIL TANKS AND ELEVATOR LANDING PADS. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  9. Digital psychiatry.

    PubMed

    Tang, S; Helmeste, D

    2000-02-01

    The American managed care movement has been viewed as a big experiment and is being watched closely by the rest of the world. In the meanwhile, computer-based information technology (IT) is changing the practice of medicine, much more rapidly than managed care. A New World of digitized knowledge and information has been created. Although literature on IT in psychiatry is largely absent in peer-reviewed psychiatric journals, IT is finding its way into all aspects of medicine, particularly psychiatry. Telepsychiatry programs are becoming very popular. At the same time, medical information sites are flourishing and evolving into a new health-care industry. Patient-physician information asymmetry is decreasing as patients are gaining easy access to medical information hitherto only available to professionals. Thus, psychiatry is facing another paradigm shift, at a time when most attention has been focused on managed care. In this new digital world, knowledge and information are no longer the sole property of professionals. Value will migrate from traditional in-person office-based therapy to digital clinical products, from in-person library search and classroom didactic instruction to interactive on-line searches and distance learning. In this time of value migration, psychiatrists have to determine what their 'distinctive competence' is and where best to add value in the health-care delivery value chain. The authors assess the impact of IT on clinical psychiatry and review how clinical practice, education and research in psychiatry are expected to change in this emerging digital world. PMID:15558872

  10. DNA synthesis and microtubule assembly-related events in fertilized Paracentrotus lividus eggs: reversible inhibition by 10 mM procaine.

    PubMed

    Raymond, M N; Foucault, G; Coffe, G; Pudles, J

    1986-04-01

    This report describes the effects of 10 mM procaine on microtubule assembly and on DNA synthesis, as followed by [3H]colchicine binding assays and [3H]thymidine incorporation respectively, in fertilized Paracentrotus lividus eggs. In the absence of microtubule assembly inhibitors, about 25% of the total egg tubulin is submitted to two cycles of polymerization prior to the first cell division, this polymerization process precedes DNA synthesis. If the zygotes are treated with 10 mM procaine in the course of the cell cycle, tubulin polymerization is inhibited or microtubules are disassembled. DNA synthesis is inhibited when procaine treatment is performed 10 min, before the initiation of the S-period. However, when the drug is applied in the course of this synthetic period, the process is normally accomplished, but the next S-period becomes inhibited. Moreover, procaine treatment increases the cytoplasmic pH of the fertilized eggs by about 0.6 to 0.8 pH units. This pH increase precedes microtubule disassembly and inhibition of DNA synthesis. Washing out the drug induces a decrease of the intracellular pH which returns to about the same value as that of the fertilized egg controls. This pH change is then followed by the reinitiation of microtubule assembly, DNA synthesis and cell division. Our results show that the inhibition of both tubulin polymerization and DNA synthesis in fertilized eggs treated with 10 mM procaine, appears to be related to the drug-induced increase in cytoplasmic pH. PMID:3709552

  11. Elevated temperature crack growth

    NASA Technical Reports Server (NTRS)

    Yau, J. F.; Malik, S. N.; Kim, K. S.; Vanstone, R. H.; Laflen, J. H.

    1985-01-01

    The objective of the Elevated Temperature Crack Growth Project is to evaluate proposed nonlinear fracture mechanics methods for application to combustor liners of aircraft gas turbine engines. During the first year of this program, proposed path-independent (P-I) integrals were reviewed for such applications. Several P-I integrals were implemented into a finite-element postprocessor which was developed and verified as part of the work. Alloy 718 was selected as the analog material for use in the forthcoming experimental work. A buttonhead, single-edge notch specimen was designed and verified for use in elevated-temperature strain control testing with significant inelastic strains. A crack mouth opening displacement measurement device was developed for further use.

  12. Digital Maps, Matrices and Computer Algebra

    ERIC Educational Resources Information Center

    Knight, D. G.

    2005-01-01

    The way in which computer algebra systems, such as Maple, have made the study of complex problems accessible to undergraduate mathematicians with modest computational skills is illustrated by some large matrix calculations, which arise from representing the Earth's surface by digital elevation models. Such problems are often considered to lie in…

  13. Investigation of the Accuracy of Google Earth Elevation Data

    NASA Astrophysics Data System (ADS)

    El-Ashmawy, Khalid L. A.

    2016-09-01

    Digital Elevation Models (DEMs) comprise valuable source of elevation data required for many engineering applications. Contour lines, slope - aspect maps are part of their many uses. Moreover, DEMs are used often in geographic information systems (GIS), and are the most common basis for digitally-produced relief maps. This paper proposes a method of generating DEM by using Google Earth elevation data which is easier and free. The case study consisted of three different small regions in the northern beach in Egypt. The accuracy of the Google earth derived elevation data are reported using root mean square error (RMSE), mean error (ME) and maximum absolute error (MAE). All these accuracy statistics were computed using the ground coordinates of 200 reference points for each region of the case study. The reference data was collected with total station survey. The results showed that the accuracies for the prepared DEMs are suitable for some certain engineering applications but inadequate to meet the standard required for fine/small scale DEM for very precise engineering study. The obtained accuracies for terrain with small height difference can be used for preparing large area cadastral, city planning, or land classification maps. In general, Google Earth elevation data can be used only for investigation and preliminary studies with low cost. It is strongly concluded that the users of Google Earth have to test the accuracy of elevation data by comparing with reference data before using it.

  14. Influence of Elevation Data Source on 2D Hydraulic Modelling

    NASA Astrophysics Data System (ADS)

    Bakuła, Krzysztof; Stępnik, Mateusz; Kurczyński, Zdzisław

    2016-08-01

    The aim of this paper is to analyse the influence of the source of various elevation data on hydraulic modelling in open channels. In the research, digital terrain models from different datasets were evaluated and used in two-dimensional hydraulic models. The following aerial and satellite elevation data were used to create the representation of terrain - digital terrain model: airborne laser scanning, image matching, elevation data collected in the LPIS, EuroDEM, and ASTER GDEM. From the results of five 2D hydrodynamic models with different input elevation data, the maximum depth and flow velocity of water were derived and compared with the results of the most accurate ALS data. For such an analysis a statistical evaluation and differences between hydraulic modelling results were prepared. The presented research proved the importance of the quality of elevation data in hydraulic modelling and showed that only ALS and photogrammetric data can be the most reliable elevation data source in accurate 2D hydraulic modelling.

  15. Comparison of different landform classification methods for digital landform and soil mapping of the Iranian loess plateau

    NASA Astrophysics Data System (ADS)

    Hoffmeister, Dirk; Kramm, Tanja; Curdt, Constanze; Maleki, Sedigheh; Khormali, Farhad; Kehl, Martin

    2016-04-01

    The Iranian loess plateau is covered by loess deposits, up to 70 m thick. Tectonic uplift triggered deep erosion and valley incision into the loess and underlying marine deposits. Soil development strongly relates to the aspect of these incised slopes, because on northern slopes vegetation protects the soil surface against erosion and facilitates formation and preservation of a Cambisol, whereas on south-facing slopes soils were probably eroded and weakly developed Entisols formed. While the whole area is intensively stocked with sheep and goat, rain-fed cropping of winter wheat is practiced on the valley floors. Most time of the year, the soil surface is unprotected against rainfall, which is one of the factors promoting soil erosion and serious flooding. However, little information is available on soil distribution, plant cover and the geomorphological evolution of the plateau, as well as on potentials and problems in land use. Thus, digital landform and soil mapping is needed. As a requirement of digital landform and soil mapping, four different landform classification methods were compared and evaluated. These geomorphometric classifications were run on two different scales. On the whole area an ASTER GDEM and SRTM dataset (30 m pixel resolution) was used. Likewise, two high-resolution digital elevation models were derived from Pléiades satellite stereo-imagery (< 1m pixel resolution, 10 by 10 km). The high-resolution information of this dataset was aggregated to datasets of 5 and 10 m scale. The applied classification methods are the Geomorphons approach, an object-based image approach, the topographical position index and a mainly slope based approach. The accuracy of the classification was checked with a location related image dataset obtained in a field survey (n ~ 150) in September 2015. The accuracy of the DEMs was compared to measured DGPS trenches and map-based elevation data. The overall derived accuracy of the landform classification based on the

  16. New concepts for designing d10 -M(L)n catalysts: d regime, s regime and intrinsic bite-angle flexibility.

    PubMed

    Wolters, Lando P; van Zeist, Willem-Jan; Bickelhaupt, F Matthias

    2014-09-01

    Our aim is to understand the electronic and steric factors that determine the activity and selectivity of transition-metal catalysts for cross-coupling reactions. To this end, we have used the activation strain model to quantum-chemically analyze the activity of catalyst complexes d(10) -M(L)n toward methane C-H oxidative addition. We studied the effect of varying the metal center M along the nine d(10) metal centers of Groups 9, 10, and 11 (M=Co(-), Rh(-), Ir(-), Ni, Pd, Pt, Cu(+), Ag(+), Au(+)), and, for completeness, included variation from uncoordinated to mono- to bisligated systems (n=0, 1, 2), for the ligands L=NH(3), PH(3), and CO. Three concepts emerge from our activation strain analyses: 1) bite-angle flexibility, 2) d-regime catalysts, and 3) s-regime catalysts. These concepts reveal new ways of tuning a catalyst's activity. Interestingly, the flexibility of a catalyst complex, that is, its ability to adopt a bent L-M-L geometry, is shown to be decisive for its activity, not the bite angle as such. Furthermore, the effect of ligands on the catalyst's activity is totally different, sometimes even opposite, depending on the electronic regime (d or s) of the d(10) -M(L)n complex. Our findings therefore constitute new tools for a more rational design of catalysts. PMID:25081592

  17. Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground Floor Plan, Section A-A - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  18. 3. Building 9 elevation, showing connection between elevator shaft and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Building 9 elevation, showing connection between elevator shaft and Building 11 on right. View looking NWW. - John & James Dobson Carpet Mill (West Parcel), Building No. 9, 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA

  19. 2. Building 5 west elevation, showing Building 4 west elevation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Building 5 west elevation, showing Building 4 west elevation and stack associated with Building 3 to right. View looking SEE. - John & James Dobson Carpet Mill (West Parcel), Building No. 5, 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA

  20. 2. Building 9 north elevation oblique including elevator shaft. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Building 9 north elevation oblique including elevator shaft. View looking west. - John & James Dobson Carpet Mill (West Parcel), Building No. 9, 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA

  1. 3. NORTH ELEVATION OF BOILER HOUSE; PARTIAL NORTH ELEVATION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. NORTH ELEVATION OF BOILER HOUSE; PARTIAL NORTH ELEVATION OF ENGINE HOUSE, LEFT REAR. - Providence Sewage Treatment System, Ernest Street Pumping Station, Boiler House, Ernest Street & Allens Avenue, Providence, Providence County, RI

  2. north elevation, south elevation, building section, window details Chopawamsic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    north elevation, south elevation, building section, window details - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Main Arts and Crafts Lodge, Prince William Forest Park, Triangle, Prince William County, VA

  3. location plan, floor plan, west elevation, east elevation Chopawamsic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    location plan, floor plan, west elevation, east elevation - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Main Arts and Crafts Lodge, Prince William Forest Park, Triangle, Prince William County, VA

  4. 33. Coal Fuel Elevator (diagonal in foreground), Fuel Elevator (left), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. Coal Fuel Elevator (diagonal in foreground), Fuel Elevator (left), Fuel Storage Bins (center), and Power Plant (right) Photographs taken by Joseph E.B. Elliot - Huber Coal Breaker, 101 South Main Street, Ashley, Luzerne County, PA

  5. 3. A general elevation view looking west highlights the Elevator ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. A general elevation view looking west highlights the Elevator and Silo Complex C, commonly known as the 'Landmark' (1940). - Quaker Oats Cereal Factory, Southeast corner of Broadway & Mill Streets, Akron, Summit County, OH

  6. Building C west elevation showing south elevation of Building B ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building C west elevation showing south elevation of Building B (on left) and north elevation of Building D (on right). The Germantown Dyeworks complex and smoke stack appear in the background. View looking east - Hinckley Knitting Mills, Building C, 21-35 East Wister Street, Philadelphia, Philadelphia County, PA

  7. Elevations and Floor Plan of Shed No. 1, Elevations and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Elevations and Floor Plan of Shed No. 1, Elevations and Floor Plan of Work Shed, Elevations and Floor Plan of Garage - Roberts-Dolezal Farmstead, 75 miles northeast of the intersection of CR27 and FM 1722, Garrett, Ellis County, TX

  8. 3. Occident Terminal Elevator. Reinforced concrete. First total "electric" elevator ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Occident Terminal Elevator. Reinforced concrete. First total "electric" elevator at Duluth. (Powered by electrical substation instead of steam generator). - Occident Terminal Elevator & Storage Annex, South side of second slip, north from outer end of Rice's Point, east of Garfield Avenue, Duluth, St. Louis County, MN

  9. Digital demodulator

    NASA Technical Reports Server (NTRS)

    Shull, T. A. (Inventor)

    1982-01-01

    A digital demodulator for converting pulse code modulated data from phase shift key (PSK) to non return to zero (NRZ) and to biphase data is described. The demodulator is composed of standard integrated logic circuits. The key to the demodulation function is a pair of cross coupled one shot multivibrators and which with a flip-flop produce the NRZ-L is all that is required, the circuitry is greatly simplified and the 2(v) times bit rate contraint can be removed from the carrier. A flip-flop, an OR gate, and AND gate and a binary counter generate the bit rate clock (BTCK) for the NRZ-L. The remainder of the circuitry is for converting the NRZ-L and BTCK into biphase data. The device was designed for use in the space shuttle bay environment measurements.

  10. Digital Avionics

    NASA Technical Reports Server (NTRS)

    Koelbl, Terry G.; Ponchak, Denise; Lamarche, Teresa

    2003-01-01

    Digital Avionics activities played an important role in the advancements made in civil aviation, military systems, and space applications. This document profiles advances made in each of these areas by the aerospace industry, NASA centers, and the U.S. military. Emerging communication technologies covered in this document include Internet connectivity onboard aircraft, wireless broadband communication for aircraft, and a mobile router for aircraft to communicate in multiple communication networks over the course of a flight. Military technologies covered in this document include avionics for unmanned combat air vehicles and microsatellites, and head-up displays. Other technologies covered in this document include an electronic flight bag for the Boeing 777, and surveillance systems for managing airport operations.

  11. Digital structural

    USGS Publications Warehouse

    Dohm, J.M.; Anderson, R.C.; Tanaka, K.L.

    1998-01-01

    Magmatic and tectonic activity have both contributed significantly to the surface geology of Mars. Digital structural mapping techniques have now been used to classify and date centers of tectonic activity in the western equatorial region. For example, our results show a center of tectonic activity at Valles Marineris, which may be associated with uplift caused by intrusion. Such evidence may help explain, in part, the development of the large troughs and associated outflow channels and chaotic terrain. We also find a local centre of tectonic activity near the source region of Warrego Valles. Here, we suggest that the valley system may have resulted largely from intrusive-related hydrothermal activity. We hope that this work, together with the current Mars Global Surveyor mission, will lead to a better understanding of the geological processes that shaped the Martian surface.

  12. Digital Avionics

    NASA Technical Reports Server (NTRS)

    Koelbl, Terry G.; Ponchak, Denise; Lamarche, Teresa

    2002-01-01

    The field of digital avionics experienced another year of important advances in civil aviation, military systems, and space applications. As a result of the events of 9/11/2001, NASA has pursued activities to apply its aerospace technologies toward improved aviation security. Both NASA Glenn Research Center and Langley Research Center have performed flight research demonstrations using advanced datalink concepts to transmit live pictures from inside a jetliner, and to downlink the contents of the plane's 'black box' recorder in real time. The U.S. Navy and General Electric demonstrated survivable engine control (SEC) algorithms during engine ground tests at the Weapons Survivability Laboratory at China Lake. The scientists at Boeing Satellite Systems advanced the field of stellar inertial technology with the development of a new method for positioning optical star trackers on satellites.

  13. Experimental prototype of an electric elevator

    NASA Astrophysics Data System (ADS)

    Gaiceanu, M.; Epure, S.; Ciuta, S.

    2016-08-01

    The main objective is to achieve an elevator prototype powered by a three-phase voltage system via a bidirectional static power converter ac-ac with regenerating capability. In order to diminish the power size of the electric motor up to 1/3 of rated power, the elevator contains two carriages of the same weight, one serving as the payload, and the other as counterweight. Before proper operation of the static power converter, the capacitor must be charged at rated voltage via a precharge circuit. At the moment of stabilizing the DC voltage at nominal value, the AC-AC power converter can operates in the proper limits. The functions of the control structure are: the load control task, speed and torque controls. System includes transducers for current measuring, voltage sensors and encoder. As reserve power sources the hybrid battery-photovoltaic panels are used. The control voltage is modulated by implementing four types of pulse width modulations: sinusoidal, with reduced commutation, third order harmonic insertion, and the space vector modulation. Therefore, the prototype could operates with an increased efficiency, in spite of the existing ones. The experimental results confirm the well design of the chosen solution. The control solution assures bidirectional power flow control, precharge control, and load control and it is implemented on a digital signal processor. The elevator capacity is between 300-450 kg, and it is driven by using a 1.5 kW three-phase asynchronous machine.

  14. Using the solar elevation angle and radiance conversion to normalize forest spectral signatures

    NASA Technical Reports Server (NTRS)

    Middleton, E. M.; Lu, Y.-C.

    1984-01-01

    A number of spectral signals associated with forest cover were selected in order to test the usefulness of adjustments to Landsat MSS digital count values. The signatures were taken from 26 independent regional land cover inventories in the northeastern US. A regression analysis was conducted which revealed a significant relationship between digital count values and variation in the solar elevation angles in MSS bands four, six, and seven for deciduous forests and in all MSS bands for conifers. When signatures were adjusted for solar elevation angles and MSS sensor calibration differences, the dependence on solar elevation angle was reduced. The adjustments also significantly reduced the variance with Level II forest categories among scenes.

  15. The 3D Elevation Program: summary of program direction

    USGS Publications Warehouse

    Snyder, Gregory I.

    2012-01-01

    The 3D Elevation Program (3DEP) initiative responds to a growing need for high-quality topographic data and a wide range of other three-dimensional representations of the Nation's natural and constructed features. The National Enhanced Elevation Assessment (NEEA), which was completed in 2011, clearly documented this need within government and industry sectors. The results of the NEEA indicated that enhanced elevation data have the potential to generate $13 billion in new benefits annually. The benefits apply to food risk management, agriculture, water supply, homeland security, renewable energy, aviation safety, and other areas. The 3DEP initiative was recommended by the National Digital Elevation Program and its 12 Federal member agencies and was endorsed by the National States Geographic Information Council (NSGIC) and the National Geospatial Advisory Committee (NGAC).

  16. Elevations and Distances

    USGS Publications Warehouse

    ,

    2005-01-01

    Photographs and other images of the Earth taken from the air and from space show a great deal about the planet's landforms, vegetation, and resources. Aerial and satellite images, known as remotely sensed images, permit accurate mapping of land cover and make landscape features understandable on regional, continental, and even global scales. Transient phenomena, such as seasonal vegetation vigor and contaminant discharges, can be studied by comparing images acquired at different times. The U.S. Geological Survey (USGS), which began using aerial photographs for mapping in the 1930's, archives photographs from its mapping projects and from those of some other Federal agencies. In addition, many images from such space programs as Landsat, begun in 1972, are held by the USGS. Most satellite scenes can be obtained only in digital form for use in computer-based image processing and geographic information systems, but in some cases are also available as photographic products.

  17. Compact 10 mW all-solid-state 491 nm laser based on frequency doubling a master oscillator power amplifier laser diode

    NASA Astrophysics Data System (ADS)

    Fluck, Daniel; Pliska, Tomas; Günter, Peter

    1996-02-01

    We report on continuous-wave blue-green light generation by direct frequency doubling a monolithically integrated master oscillator power amplifier laser diode in a potassium niobate (KNbO 3) crystal. 10 mW of diffraction limited ( M2 ≤ 1.1) second-harmonic light at 491 nm is generated with a fundamental power of 760 mW incident on a 17 mm long crystal. The blue-green laser radiation is 100% polarised and single-longitudinal mode with a frequency linewidth of ˜33 GHz corresponding to a coherence length of ˜6 mm. The root-mean-square fluctuations of the second-harmonic output power is as low as 0.1% and the power drift is less than 3% over six hours.

  18. An Overview of the MOS Capabilities of the 4-10 m Telescopes at La Palma Observatory for Investigating Galaxy Clusters

    NASA Astrophysics Data System (ADS)

    Barrena, R.; Rubiño-Martín, J. A.; Streblyanska, A.; Ferragamo, A.

    2016-10-01

    La Palma Observatory offers four multi-object spectrographs installed on 4 and 10 m class telescopes. We present an overview of these four instruments. As a scientific case for two of them, we present the optical follow-up of Sunyaev-Zeldovich (SZ) sources undertaken by the Planck collaboration, focused on the detection, redshifts determination and mass estimation of the (SZ) galaxies cluster candidates. After three years of observations we have found optical counterparts for 120 candidates confirmed spectroscopically. We have determined dynamical masses for more than 30 systems with redshifts of z<0.85. Our experience demonstrates that DOLORES (TNG) and OSIRIS (GTC) are the ideal multi-object spectroscopy (MOS) instruments to investigate galaxy clusters at z<0.45 and 0.45

  19. Elucidation of the Corrosion Inhibition of Mild Steel in 1.0 M HCl by Catechin Monomers from Commercial Green Tea Extracts

    NASA Astrophysics Data System (ADS)

    Nofrizal, S.; Rahim, Afidah A.; Saad, Bahruddin; Bothi Raja, P.; Shah, Affaizza M.; Yahya, S.

    2012-04-01

    The inhibitive action of commercial green tea extracts on mild steel (MS) in a 1.0 M hydrochloric acid solution was investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). A high-performance liquid chromatographic (HPLC) analysis showed conclusively that of the eight catechin monomers and caffeine found in the original extracts, only four components were responsible for the inhibition of MS. The decreasing adsorption capacity of monomers on MS is related to the stereochemistry of molecules and the number of phenolic groups, and it is as follows: epigallocatechin gallate > epicatechin gallate > epigallocatechin > epicatechin. Adsorption of green tea extract constituent was found to follow Langmuir adsorption isotherm and the calculated Gibb's free energy values indicated the physisorption of inhibitor over MS surface. Physisorption was supported well by the potential zero charge (PZC) and molecular surface energy-level calculations.

  20. Can We Teach Digital Natives Digital Literacy?

    ERIC Educational Resources Information Center

    Ng, Wan

    2012-01-01

    In recent years, there has been much debate about the concept of digital natives, in particular the differences between the digital natives' knowledge and adoption of digital technologies in informal versus formal educational contexts. This paper investigates the knowledge about educational technologies of a group of undergraduate students…

  1. Elevated temperature biaxial fatigue

    NASA Technical Reports Server (NTRS)

    Jordan, E. H.

    1984-01-01

    A three year experimental program for studying elevated temperature biaxial fatigue of a nickel based alloy Hastelloy-X has been completed. A new high temperature fatigue test facility with unique capabilities has been developed. Effort was directed toward understanding multiaxial fatigue and correlating the experimental data to the existing theories of fatigue failure. The difficult task of predicting fatigue lives for non-proportional loading was used as an ultimate test for various life prediction methods being considered. The primary means of reaching improved undertanding were through several critical non-proportional loading experiments. It was discovered that the cracking mode switched from primarily cracking on the maximum shear planes at room temperature to cracking on the maximum normal strain planes at 649 C.

  2. Digital photorefraction

    NASA Astrophysics Data System (ADS)

    Costa, Manuel F.; Jorge, Jorge M.

    1997-12-01

    The early evaluation of the visual status of human infants is of a critical importance. It is of utmost importance to the development of the child's visual system that she perceives clear, focused, retinal images. Furthermore if the refractive problems are not corrected in due time amblyopia may occur. Photorefraction is a non-invasive clinical tool rather convenient for application to this kind of population. A qualitative or semi-quantitative information about refractive errors, accommodation, strabismus, amblyogenic factors and some pathologies (cataracts) can the easily obtained. The photorefraction experimental setup we established using new technological breakthroughs on the fields of imaging devices, image processing and fiber optics, allows the implementation of both the isotropic and eccentric photorefraction approaches. Essentially both methods consist on delivering a light beam into the eyes. It is refracted by the ocular media, strikes the retina, focusing or not, reflects off and is collected by a camera. The system is formed by one CCD color camera and a light source. A beam splitter in front of the camera's objective allows coaxial illumination and observation. An optomechanical system also allows eccentric illumination. The light source is a flash type one and is synchronized with the camera's image acquisition. The camera's image is digitized displayed in real time. Image processing routines are applied for image's enhancement and feature extraction.

  3. Digital photorefraction

    NASA Astrophysics Data System (ADS)

    Costa, Manuel F. M.; Jorge, Jorge M.

    1998-01-01

    The early evaluation of the visual status of human infants is of a critical importance. It is of utmost importance to the development of the child's visual system that she perceives clear, focused, retinal images. Furthermore if the refractive problems are not corrected in due time amblyopia may occur. Photorefraction is a non-invasive clinical tool rather convenient for application to this kind of population. A qualitative or semi-quantitative information about refractive errors, accommodation, strabismus, amblyogenic factors and some pathologies (cataracts) can the easily obtained. The photorefraction experimental setup we established using new technological breakthroughs on the fields of imaging devices, image processing and fiber optics, allows the implementation of both the isotropic and eccentric photorefraction approaches. Essentially both methods consist on delivering a light beam into the eyes. It is refracted by the ocular media, strikes the retina, focusing or not, reflects off and is collected by a camera. The system is formed by one CCD color camera and a light source. A beam splitter in front of the camera's objective allows coaxial illumination and observation. An optomechanical system also allows eccentric illumination. The light source is a flash type one and is synchronized with the camera's image acquisition. The camera's image is digitized displayed in real time. Image processing routines are applied for image's enhancement and feature extraction.

  4. Digital atlas of Oklahoma

    USGS Publications Warehouse

    Rea, A.H.; Becker, C.J.

    1997-01-01

    This compact disc contains 25 digital map data sets covering the State of Oklahoma that may be of interest to the general public, private industry, schools, and government agencies. Fourteen data sets are statewide. These data sets include: administrative boundaries; 104th U.S. Congressional district boundaries; county boundaries; latitudinal lines; longitudinal lines; geographic names; indexes of U.S. Geological Survey 1:100,000, and 1:250,000-scale topographic quadrangles; a shaded-relief image; Oklahoma State House of Representatives district boundaries; Oklahoma State Senate district boundaries; locations of U.S. Geological Survey stream gages; watershed boundaries and hydrologic cataloging unit numbers; and locations of weather stations. Eleven data sets are divided by county and are located in 77 county subdirectories. These data sets include: census block group boundaries with selected demographic data; city and major highways text; geographic names; land surface elevation contours; elevation points; an index of U.S. Geological Survey 1:24,000-scale topographic quadrangles; roads, streets and address ranges; highway text; school district boundaries; streams, river and lakes; and the public land survey system. All data sets are provided in a readily accessible format. Most data sets are provided in Digital Line Graph (DLG) format. The attributes for many of the DLG files are stored in related dBASE(R)-format files and may be joined to the data set polygon attribute or arc attribute tables using dBASE(R)-compatible software. (Any use of trade names in this publication is for descriptive purposes only and does not imply endorsement by the U.S. Government.) Point attribute tables are provided in dBASE(R) format only, and include the X and Y map coordinates of each point. Annotation (text plotted in map coordinates) are provided in AutoCAD Drawing Exchange format (DXF) files. The shaded-relief image is provided in TIFF format. All data sets except the shaded

  5. H. Sapiens Digital: From Digital Immigrants and Digital Natives to Digital Wisdom

    ERIC Educational Resources Information Center

    Prensky, Marc

    2009-01-01

    As we move further into the 21st century, the digital native/digital immigrant paradigm created by Marc Prensky in 2001 is becoming less relevant. In this article, Prensky suggests that we should focus instead on the development of what he calls "digital wisdom." Arguing that digital technology can make us not just smarter but truly wiser, Prensky…

  6. Digital Sensor Technology

    SciTech Connect

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  7. Digital signal processing: Handbook

    NASA Astrophysics Data System (ADS)

    Goldenberg, L. M.; Matiushkin, B. D.; Poliak, M. N.

    The fundamentals of the theory and design of systems and devices for the digital processing of signals are presented. Particular attention is given to algorithmic methods of synthesis and digital processing equipment in communication systems (e.g., selective digital filtering, spectral analysis, and variation of the signal discretization frequency). Programs for the computer-aided analysis of digital filters are described. Computational examples are presented, along with tables of transfer function coefficients for recursive and nonrecursive digital filters.

  8. 10 m/25 Gbps LiFi transmission system based on a two-stage injection-locked 680 nm VCSEL transmitter.

    PubMed

    Lu, Hai-Han; Li, Chung-Yi; Chu, Chien-An; Lu, Ting-Chien; Chen, Bo-Rui; Wu, Chang-Jen; Lin, Dai-Hua

    2015-10-01

    A 10  m/25  Gbps light-based WiFi (LiFi) transmission system based on a two-stage injection-locked 680 nm vertical-cavity surface-emitting laser (VCSEL) transmitter is proposed. A LiFi transmission system with a data rate of 25 Gbps is experimentally demonstrated over a 10 m free-space link. To the best of our knowledge, it is the first time a two-stage injection-locked 680 nm VCSEL transmitter in a 10  m/25  Gbps LiFi transmission system has been employed. Impressive bit error rate performance and a clear eye diagram are achieved in the proposed systems. Such a 10  m/25  Gbps LiFi transmission system provides the advantage of a communication link for higher data rates that could accelerate the deployment of visible laser light communication. PMID:26421582

  9. The very high energy gamma ray spectra of IES 1959+650 and Mrk 421 as measured with the Whipple 10 m telescope

    SciTech Connect

    Daniel, M.K.; Badran, H.M.; Bond, I.H.; Boyle, P.J.; Bradbury, S. M.; Buckley, J.H.; Byrum, K.; Carter-Lewis, D.A.; Celik, O.; Cogan, P.; Cui, W.; Calle Perez, I. de la; Duke, C.; Falcone, A.; Fegan, D.J.; Fegan, S.J.; Finley, J.P.; Fortson, L.F.; Gammell, S.; Gibbs, K.

    2005-02-21

    In observations made with the Whipple 10 m telescope, 1ES 1959+650 (z 0.048) was caught in a high flaring state in May 2002, concurrent with a high X-ray state, and in June 2002, for which there was no corresponding X-ray flare. The spectra for both of those occasions are well fitted by a power law of differential spectral index {approx} -2.8. The relative stability of the spectral index for those flares argues strongly in favour of a two-component model as to the emission zones for the two radiation regimes.Markarian 421 (z = 0.031) was observed to be in a high flaring state, at levels of {>=} 3 Crab, during March and April 2004. The average spectrum over this time period shows evidence for a cut-off in the spectrum at {approx} 5 TeV, similar to a cut-off seen during an equivalently strong episode of flaring activity in 2001. The continued appearance of this feature indicates a long term stability, either in the physical conditions at the source, or in the intervening medium (such as attenuation on the extra-galactic infra-red background radiation)

  10. Assessing topsoil and bedrock hydrodynamic properties from natural and artificial rainfalls over a 10m2 steep plot in Cevennes area (France)

    NASA Astrophysics Data System (ADS)

    Adamovic, Marko; Bouvier, Christophe; Brunet, Pascal; Ayral, Pierre-Alain

    2016-04-01

    Flash floods are feature of Mediterranean climate characterized by heavy rainfalls in a few hours. Hydrological processes depend on both the topsoil and bedrock properties, which are still poorly known in the mountainous areas. Thus, special attention was paid to characterize the water fluxes in the shallow near-surface area. This study focuses on a 10-m2plot within a granitic hillslope in Cevennes area. Water content was monitored at several depths (up to 70cm) during both intense artificial and natural rainfall events, in order to study both infiltration and saturation processes in both extreme and normal conditions. Inverse modeling was performed in order to estimate parameters, such as θs, θr, α, n, Ks associated to the Mualem-Van Genuchten formulation, using the HYDRUS-1D software. The deep boundary condition was also calibrated to assess the properties of the deep layers. Although the topsoil depth is rather small (˜40 cm), the water storage during the rainfalls was estimated to be some hundreds millimeters, which largely exceeds the topsoil capacity. It suggests that the weathered area (and maybe the fractured rock area) below the soil, can have an active role in the water storage and sub-surface flow dynamics. Similar parameters were used to perform correct simulations under both artificial and natural rainfalls: thus artificial rainfalls enhance extreme conditions corresponding to flash floods occurrence, and the identified flux patterns are robust in natural conditions.

  11. Extracellular vesicles shed by melanoma cells contain a modified form of H1.0 linker histone and H1.0 mRNA-binding proteins

    PubMed Central

    Schiera, Gabriella; Di Liegro, Carlo Maria; Puleo, Veronica; Colletta, Oriana; Fricano, Anna; Cancemi, Patrizia; Di Cara, Gianluca; Di Liegro, Italia

    2016-01-01

    Extracellular vesicles (EVs) are now recognized as a fundamental way for cell-to-cell horizontal transfer of properties, in both physiological and pathological conditions. Most of EV-mediated cross-talk among cells depend on the exchange of proteins, and nucleic acids, among which mRNAs, and non-coding RNAs such as different species of miRNAs. Cancer cells, in particular, use EVs to discard molecules which could be dangerous to them (for example differentiation-inducing proteins such as histone H1.0, or antitumor drugs), to transfer molecules which, after entering the surrounding cells, are able to transform their phenotype, and even to secrete factors, which allow escaping from immune surveillance. Herein we report that melanoma cells not only secrete EVs which contain a modified form of H1.0 histone, but also transport the corresponding mRNA. Given the already known role in tumorigenesis of some RNA binding proteins (RBPs), we also searched for proteins of this class in EVs. This study revealed the presence in A375 melanoma cells of at least three RBPs, with apparent MW of about 65, 45 and 38 kDa, which are able to bind H1.0 mRNA. Moreover, we purified one of these proteins, which by MALDI-TOF mass spectrometry was identified as the already known transcription factor MYEF2. PMID:27633859

  12. Serum FSH level below 10 mIU/mL at twelve years old is an index of spontaneous and cyclical menstruation in Turner syndrome.

    PubMed

    Aso, Keiko; Koto, Shinobu; Higuchi, Asako; Ariyasu, Daisuke; Izawa, Masako; Miyamoto Igaki, Junko; Hasegawa, Yukihiro

    2010-01-01

    The gonadal function of patients with Turner syndrome (TS) is variable. Individuals with mosaicism characterized by 45,X/46,XX or 45,X/47,XXX are more likely to experience spontaneous menarche compared with other karyotypes. Prepubertal gonadotropins of TS patients with spontaneous menarche are reportedly normal or significantly lower than those of patients with induced menarche. The present study investigated an index of spontaneous and cyclical menstruation at 10-12 years old in TS. Subjects comprised 50 patients with TS, divided into three groups: Group A (n=7), with spontaneous menarche before 16 years old and regular menstruation for at least 1 year and 6 months; Group B (n=6), with irregular menstruation since menarche leading to secondary amenorrhea despite spontaneous menarche before 16 years old; and Group C (n=37), without spontaneous breast budding before 14 years old or without spontaneous menarche before 16 years old. Karyotype, LH and FSH concentrations at 10 and 12 years old were analyzed retrospectively. Spontaneous and cyclical menstruation was more frequently observed in TS with mosaicism characterized by 45,X/46,XX or 45,X/47,XXX than in TS with other karyotypes, as previously described. Spontaneous and cyclical menstruation in TS was observed when serum FSH level was <10 mIU/mL at 12 years old, suggesting this FSH level as an index of spontaneous and cyclical menstruation in TS. PMID:20798475

  13. 10 m/25 Gbps LiFi transmission system based on a two-stage injection-locked 680 nm VCSEL transmitter.

    PubMed

    Lu, Hai-Han; Li, Chung-Yi; Chu, Chien-An; Lu, Ting-Chien; Chen, Bo-Rui; Wu, Chang-Jen; Lin, Dai-Hua

    2015-10-01

    A 10  m/25  Gbps light-based WiFi (LiFi) transmission system based on a two-stage injection-locked 680 nm vertical-cavity surface-emitting laser (VCSEL) transmitter is proposed. A LiFi transmission system with a data rate of 25 Gbps is experimentally demonstrated over a 10 m free-space link. To the best of our knowledge, it is the first time a two-stage injection-locked 680 nm VCSEL transmitter in a 10  m/25  Gbps LiFi transmission system has been employed. Impressive bit error rate performance and a clear eye diagram are achieved in the proposed systems. Such a 10  m/25  Gbps LiFi transmission system provides the advantage of a communication link for higher data rates that could accelerate the deployment of visible laser light communication.

  14. 180 degree view of Building 7 elevations, illustrating front elevation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    180 degree view of Building 7 elevations, illustrating front elevation of two story unit type with one story step-down on street side. View facing west - Harbor Hills Housing Project, One & Two Story Townhouse Type, 26607 Western Avenue, Lomita, Los Angeles County, CA

  15. 180 degree view of Building 7 elevations, illustrating rear elevation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    180 degree view of Building 7 elevations, illustrating rear elevation of two story unit type with one story step-down on street side. View facing east - Harbor Hills Housing Project, One & Two Story Townhouse Type, 26607 Western Avenue, Lomita, Los Angeles County, CA

  16. 35. Coal Fuel Elevator (diagonal in center), Fuel Elevator (left), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. Coal Fuel Elevator (diagonal in center), Fuel Elevator (left), Fuel Storage Bins (center), and Power Plant (far center), and Retail Coal Storage Bins (right) Photograph taken by George Harven - Huber Coal Breaker, 101 South Main Street, Ashley, Luzerne County, PA

  17. 34. Coal Fuel Elevator (diagonal in foreground), Fuel Elevator (left), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. Coal Fuel Elevator (diagonal in foreground), Fuel Elevator (left), Fuel Storage Bins (center), and Power Plant (far center), and Retail Coal Storage Bins (right) Photograph taken by George Harven - Huber Coal Breaker, 101 South Main Street, Ashley, Luzerne County, PA

  18. Influence of elevation modelling on hydrodynamic simulations of a tidally-dominated estuary

    NASA Astrophysics Data System (ADS)

    Falcão, Ana Paula; Mazzolari, Andrea; Gonçalves, Alexandre B.; Araújo, Maria Amélia V. C.; Trigo-Teixeira, António

    2013-08-01

    Hydrodynamic simulation of estuaries requires a single digital elevation model (DEM) resulting from merging of both topographic and bathymetric data. These two datasets are usually produced using different technologies, co-ordinate systems and datums. Intertidal data in particular are often lacking due to the difficulty of data acquisition using conventional survey techniques. This paper presents a fast, accurate and low-cost methodology to fill this gap and highlights the effect of the digital elevation model characteristics, such as the interpolation method and spatial resolution, on modelled water levels and flooded areas. The Lima river estuary, located in North-western Portugal, is used as a case study. Validation tests for commonly available spatial interpolators showed ordinary kriging to be the most adequate interpolator. Digital elevation models with regular grids of 5 m and 50 m resolution were used, together with the original (not interpolated) elevation dataset, as input to a finite element hydrodynamic model for astronomic tide simulation. Results indicate that the larger differences between using different elevation models occur at low tide during spring tide, marginally impacting the flood modelling. The effect of a vertical offset of the chart datum with respect to a part of the digital elevation model was finally investigated, showing a limited influence in the determination of the water levels.

  19. Modeling Water-Surface Elevations and Virtual Shorelines for the Colorado River in Grand Canyon, Arizona

    USGS Publications Warehouse

    Magirl, Christopher S.; Breedlove, Michael J.; Webb, Robert H.; Griffiths, Peter G.

    2008-01-01

    Using widely-available software intended for modeling rivers, a new one-dimensional hydraulic model was developed for the Colorado River through Grand Canyon from Lees Ferry to Diamond Creek. Solving one-dimensional equations of energy and continuity, the model predicts stage for a known steady-state discharge at specific locations, or cross sections, along the river corridor. This model uses 2,680 cross sections built with high-resolution digital topography of ground locations away from the river flowing at a discharge of 227 m3/s; synthetic bathymetry was created for topography submerged below the 227 m3/s water surface. The synthetic bathymetry was created by adjusting the water depth at each cross section up or down until the model?s predicted water-surface elevation closely matched a known water surface. This approach is unorthodox and offers a technique to construct one-dimensional hydraulic models of bedrock-controlled rivers where bathymetric data have not been collected. An analysis of this modeling approach shows that while effective in enabling a useful model, the synthetic bathymetry can differ from the actual bathymetry. The known water-surface profile was measured using elevation data collected in 2000 and 2002, and the model can simulate discharges up to 5,900 m3/s. In addition to the hydraulic model, GIS-based techniques were used to estimate virtual shorelines and construct inundation maps. The error of the hydraulic model in predicting stage is within 0.4 m for discharges less than 1,300 m3/s. Between 1,300-2,500 m3/s, the model accuracy is about 1.0 m, and for discharges between 2,500-5,900 m3/s, the model accuracy is on the order of 1.5 m. In the absence of large floods on the flow-regulated Colorado River in Grand Canyon, the new hydraulic model and the accompanying inundation maps are a useful resource for researchers interested in water depths, shorelines, and stage-discharge curves for flows within the river corridor with 2002 topographic

  20. The Digital Pipetting Badge: A Method to Improve Student Hands-On Laboratory Skills

    ERIC Educational Resources Information Center

    Towns, Marcy; Harwood, Cynthia J.; Robertshaw, M. Brooke; Fish, Jason; O'Shea, Kevin

    2015-01-01

    An evidence centered design approach was used to develop, implement, and assess a novel and innovative digital pipetting badge using Purdue's Passport system. Each student in a large lecture course created a video demonstrating how to use a 10 mL pipet to dispense liquid. The video was uploaded into the Passport system, which allowed instructors…

  1. Efficient and Flexible Strategy Use on Multi-Digit Sums: A Choice/No-Choice Study

    ERIC Educational Resources Information Center

    Torbeyns, Joke; Verschaffel, Lieven

    2013-01-01

    This study analysed children's use of mental computation strategies and standard written algorithms in the domain of multi-digit addition and subtraction, using the choice/no-choice method. Twenty-one Flemish fourth-graders (M[subscript Age] =9y10m) solved problem-items that either stimulated the use of mental computation strategies or a standard…

  2. Anthropogenic Elevation Change in the Pacific Northwest

    NASA Astrophysics Data System (ADS)

    Prush, V. B.; Lohman, R. B.

    2013-12-01

    Over the past few decades, interferometric synthetic aperture radar (InSAR) has emerged as a valuable tool for studying crustal deformation signals. Its applications to studies of tectonic and non-tectonic sources are varied, including earthquakes and fault-related processes, volcanic deformation, vegetation structure, and anthropogenic signals. In addition to studies of crustal deformation, the sensitivity of interferometric phase to topography makes InSAR a superb tool for the generation of digital elevation models (DEMs). While much of the focus of InSAR research in recent years has been on deformation, changes in the elevation of the ground surface can be of great scientific or societal interest as well. Examples include elevation and volume change due to anthropogenic processes such as landfill and open-pit mining operations, and natural processes such as glacier thinning or terrain alteration resulting from effusive volcanic eruptions. Our study describes two elevation change signals observed in the Pacific Northwest that are of anthropogenic origin. Using the baseline-dependent nature of the topographic component of interferometric phase, we have determined a proxy for canopy height using coherent interferometric phase differences between adjacent logged and forested regions, as well as a means for determining estimates of the amount and time history of material displaced during mining operations at the Centralia Coal Mine in Centralia, Washington. Quantifying the amount of surface change due to anthropogenic activities is not only critical for tracking the altering landscape of the Pacific Northwest and reducing the observed error in interferograms attributable to elevation change. Deforestation is one of the most significant contributors to global carbon emissions, and quantifying changes in vegetation structure can assist in efforts to monitor and mitigate the effects of deforestation on climate change. Similarly, mining operations can have a lasting

  3. Interpolation and elevation errors: the impact of the DEM resolution

    NASA Astrophysics Data System (ADS)

    Achilleos, Georgios A.

    2015-06-01

    Digital Elevation Models (DEMs) are developing and evolving at a fast pace, given the progress of computer science and technology. This development though, is not accompanied by an advancement of knowledge on the quality of the models and their indigenous inaccuracy. The user on most occasions is not aware of this quality thus in not aware of the correlating product uncertainty. Extensive research has been conducted - and still is - towards this direction. In the research presented in this paper there is an analysis of elevation errors behavior which are recorded in a DEM. The behavior of these elevation errors, is caused by altering the DEM resolution upon the application of the algorithm interpolation. Contour lines are used as entry data from a topographical map. Elevation errors are calculated in the positions of the initial entry data and wherever the elevation is known. The elevation errors that are recorded, are analyzed, in order to reach conclusions about their distribution and the way in which they occur.

  4. Pictometry digital video mapping

    NASA Astrophysics Data System (ADS)

    Ciampa, John A.

    1995-09-01

    Pictometry is a proprietary digital imaging process which computationally maps each pixel of a digital land image to actual geographic coordinates, so that features in a mosaic of land images may be located and or measured.

  5. Digital floodplain mapping and an analysis of errors involved

    USGS Publications Warehouse

    Hamblen, C.S.; Soong, D.T.; Cai, X.

    2007-01-01

    Mapping floodplain boundaries using geographical information system (GIS) and digital elevation models (DEMs) was completed in a recent study. However convenient this method may appear at first, the resulting maps potentially can have unaccounted errors. Mapping the floodplain using GIS is faster than mapping manually, and digital mapping is expected to be more common in the future. When mapping is done manually, the experience and judgment of the engineer or geographer completing the mapping and the contour resolution of the surface topography are critical in determining the flood-plain and floodway boundaries between cross sections. When mapping is done digitally, discrepancies can result from the use of the computing algorithm and digital topographic datasets. Understanding the possible sources of error and how the error accumulates through these processes is necessary for the validation of automated digital mapping. This study will evaluate the procedure of floodplain mapping using GIS and a 3 m by 3 m resolution DEM with a focus on the accumulated errors involved in the process. Within the GIS environment of this mapping method, the procedural steps of most interest, initially, include: (1) the accurate spatial representation of the stream centerline and cross sections, (2) properly using a triangulated irregular network (TIN) model for the flood elevations of the studied cross sections, the interpolated elevations between them and the extrapolated flood elevations beyond the cross sections, and (3) the comparison of the flood elevation TIN with the ground elevation DEM, from which the appropriate inundation boundaries are delineated. The study area involved is of relatively low topographic relief; thereby, making it representative of common suburban development and a prime setting for the need of accurately mapped floodplains. This paper emphasizes the impacts of integrating supplemental digital terrain data between cross sections on floodplain delineation

  6. Structural and electronic properties of Genm- and KGen- Zintl anions (n=3-10;m=2-4) from density functional theory

    NASA Astrophysics Data System (ADS)

    Li, Si-Dian; Guo, Qiao-Ling; Zhao, Xiu-Feng; Wu, Hai-Shun; Jin, Zhi-Hao

    2002-07-01

    Structural optimizations and frequency analyses have been performed on free Genm- and KGen- (n=3-10, m=2-4) Zintl anions and ionization potentials and electron affinities calculated for KGen using the density functional theory (DFT) of Becke's three-parameter hybrid functional with the Perdew/Wang 91 expression. The DFT results obtained for small clusters (n=3-5) are further checked with both the second-order Moller-Plesset perturbation theory (MP2) and the configuration interaction calculations with all single and double substitutions from the Hartree-Fock reference determinant (CISD). Free Gen2- anions are found to share the same geometries as naked Zintl anions observed in solids with a systematical expansion in bond lengths within about 5%. Intensive searches indicate that two isomers, a tricapped trigonal prism (D3h) and a slightly distorted tricapped trigonal prism (C2v), exist for Ge92- and Ge93-, while nido-Ge94- clearly favors the monocapped antisquare prism (C4v) structure. HOMO-LUMO energy gaps >2.23 eV are obtained for Genm- series at the DFT level, except Ge93- which has a much narrower energy gap of 1.16 eV. The calculated Gibbs free energy change of Ge92-+Ge94-=2 Ge93- conversion reaction involving nonagermanides has the value of Delta]G[deg=-2.91 x105 J mol-1, providing the first quantum chemistry evidence that the geometrically deduced mixed valent couple of Ge92- and Ge94- in a previous study is thermodynamically unstable compared to two Ge93- anions. The calculated stabilization energies of Gen2-, Gen-, and Gen exhibit similar variation trends, clearly indicating a maximum at n=7, a minimum at n=8, and an obvious recovery at n=9 and 10. The calculated normal vibrational frequencies reproduce the six observed Raman peaks of naked Ge52- with an averaged discrepancy of 11 cm-1. Face-capped or edge-capped deltahedral structures are predicted for binary KGen- anions and KGen and K2Gen neutrals. The magic numbers at n=5, 9, and 10 obtained in both

  7. Digital flight control research

    NASA Technical Reports Server (NTRS)

    Potter, J. E.; Stern, R. G.; Smith, T. B.; Sinha, P.

    1974-01-01

    The results of studies which were undertaken to contribute to the design of digital flight control systems, particularly for transport aircraft are presented. In addition to the overall design considerations for a digital flight control system, the following topics are discussed in detail: (1) aircraft attitude reference system design, (2) the digital computer configuration, (3) the design of a typical digital autopilot for transport aircraft, and (4) a hybrid flight simulator.

  8. Validation of DEM Data Derived from World View 3 Stereo Imagery for Low Elevation Majuro Atoll, Marshall Islands

    EPA Science Inventory

    The availability of surface elevation data for the Marshall Islands has been identified as a “massive” data gap for conducting vulnerability assessments and the subsequent development of climate change adaption strategies. Specifically, digital elevation model (DEM) data are need...

  9. 'Columbia Hills' Color Elevation Map

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Figure 1: Spirit's Long Journey, Sol 450

    This elevation map shows the region of the 'Columbia Hills' where NASA's Mars Exploration Rover Spirit has been working since mid-2004. Areas colored blue are lower in elevation and areas colored yellow are higher in elevation. The map imagery is from the Mars Orbiter Camera on NASA's Mars Global Surveyor orbiter.

    Spirit's Long Journey, Sol 450 More than 15 months after landing on Mars, NASA's Spirit rover is still going strong, having traveled a total of 4,276 meters (2.66 miles) as of martian day, or sol, 450 (April 8, 2005). This elevation map shows the traverse followed by Spirit since arriving at the 'Columbia Hills' in June, 2004. The areas colored blue are low in elevation and areas colored yellow are high in elevation. The blue area at the foot of the 'Columbia Hills' is approximately 20 meters (66 feet) higher in elevation than the site where Spirit landed in Gusev Crater. The highest peak is on the order of 80 meters (262 feet) higher still. In other words, the hills Spirit is exploring are more than 250 feet high. The map imagery is from the Mars Orbiter Camera on NASA's Mars Global Surveyor.

  10. Digital Language Death

    PubMed Central

    Kornai, András

    2013-01-01

    Of the approximately 7,000 languages spoken today, some 2,500 are generally considered endangered. Here we argue that this consensus figure vastly underestimates the danger of digital language death, in that less than 5% of all languages can still ascend to the digital realm. We present evidence of a massive die-off caused by the digital divide. PMID:24167559

  11. Digital Literacy. Research Brief

    ERIC Educational Resources Information Center

    Williamson, Ronald

    2011-01-01

    21st Century students need a complex set of skills to be successful in a digital environment. Digital literacy, similar to traditional definitions of literacy, is a set of skills students use to locate, organize, understand, evaluate and create information. The difference is that it occurs in an environment where a growing set of digital tools…

  12. Bridging the Digital Divide

    ERIC Educational Resources Information Center

    Clarke, Alan; Milner, Helen; Killer, Terry; Dixon, Genny

    2008-01-01

    As the Government publishes its action plan for consultation on digital inclusion, the authors consider some of the challenges and opportunities for the delivery of digital inclusion. Clarke argues that digital inclusion requires more than access to technology or the skills to use it effectively, it demands information and media literacy. Milner…

  13. Reconceptualising Critical Digital Literacy

    ERIC Educational Resources Information Center

    Pangrazio, Luciana

    2016-01-01

    While it has proved a useful concept during the past 20 years, the notion of "critical digital literacy" requires rethinking in light of the fast-changing nature of young people's digital practices. This paper contrasts long-established notions of "critical digital literacy" (based primarily around the critical consumption of…

  14. 1. 'Front Elevation, End Elevation of Parapet, Section on Centerline ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. 'Front Elevation, End Elevation of Parapet, Section on Centerline of Portal,' Southern Pacific Standard Single-Track Tunnel, 1909. Compare to photos in documentation sets for Tunnel 23 (HAER No. CA-198), Tunnel 24 (HAER No. CA-200), Tunnel 25 (HAER No. CA-201), Tunnel 27 (HAER No. CA-203), Tunnel 28 (HAER No. CA-204), and Tunnel 29 (HAER No. CA-205). - Central Pacific Transcontinental Railroad, Sacramento to Nevada state line, Sacramento, Sacramento County, CA

  15. Actinide Thermodynamics at Elevated Temperatures

    SciTech Connect

    Friese, Judah I.; Rao, Linfeng; Xia, Yuanxian; Bachelor, Paula P.; Tian, Guoxin

    2007-11-16

    The postclosure chemical environment in the proposed Yucca Mountain repository is expected to experience elevated temperatures. Predicting migration of actinides is possible if sufficient, reliable thermodynamic data on hydrolysis and complexation are available for these temperatures. Data are scarce and scattered for 25 degrees C, and nonexistent for elevated temperatures. This collaborative project between LBNL and PNNL collects thermodynamic data at elevated temperatures on actinide complexes with inorganic ligands that may be present in Yucca Mountain. The ligands include hydroxide, fluoride, sulfate, phosphate and carbonate. Thermodynamic parameters of complexation, including stability constants, enthalpy, entropy and heat capacity of complexation, are measured with a variety of techniques including solvent extraction, potentiometry, spectrophotometry and calorimetry

  16. Proposed U.S. Geological Survey standard for digital orthophotos

    USGS Publications Warehouse

    Hooper, David; Caruso, Vincent

    1991-01-01

    The U.S. Geological Survey has added the new category of digital orthophotos to the National Digital Cartographic Data Base. This differentially rectified digital image product enables users to take advantage of the properties of current photoimagery as a source of geographic information. The product and accompanying standard were implemented in spring 1991. The digital orthophotos will be quadrangle based and cast on the Universal Transverse Mercator projection and will extend beyond the 3.75-minute or 7.5-minute quadrangle area at least 300 meters to form a rectangle. The overedge may be used for mosaicking with adjacent digital orthophotos. To provide maximum information content and utility to the user, metadata (header) records exist at the beginning of the digital orthophoto file. Header information includes the photographic source type, date, instrumentation used to create the digital orthophoto, and information relating to the DEM that was used in the rectification process. Additional header information is included on transformation constants from the 1927 and 1983 North American Datums to the orthophoto internal file coordinates to enable the user to register overlays on either datum. The quadrangle corners in both datums are also imprinted on the image. Flexibility has been built into the digital orthophoto format for future enhancements, such as the provision to include the corresponding digital elevation model elevations used to rectify the orthophoto. The digital orthophoto conforms to National Map Accuracy Standards and provides valuable mapping data that can be used as a tool for timely revision of standard map products, for land use and land cover studies, and as a digital layer in a geographic information system.

  17. Digital Mammography and Digital Breast Tomosynthesis.

    PubMed

    Moseley, Tanya W

    2016-06-01

    Breast imaging technology has advanced significantly from the 1930s until the present. American women have a 1 in 8 chance of developing breast cancer. Mammography has been proven in multiple clinical trials to reduce breast cancer mortality. Although a mainstay of breast imaging and improved from film-screen mammography, digital mammography is not a perfect examination. Overlapping obscuring breast tissue limits mammographic interpretation. Breast digital tomosynthesis reduces and/or eliminates overlapping obscuring breast tissue. Although there are some disadvantages with digital breast tomosynthesis, this relatively lost-cost technology may be used effectively in the screening and diagnostic settings. PMID:27101241

  18. Space Elevators Preliminary Architectural View

    NASA Astrophysics Data System (ADS)

    Pullum, L.; Swan, P. A.

    Space Systems Architecture has been expanded into a process by the US Department of Defense for their large scale systems of systems development programs. This paper uses the steps in the process to establishes a framework for Space Elevator systems to be developed and provides a methodology to manage complexity. This new approach to developing a family of systems is based upon three architectural views: Operational View OV), Systems View (SV), and Technical Standards View (TV). The top level view of the process establishes the stages for the development of the first Space Elevator and is called Architectural View - 1, Overview and Summary. This paper will show the guidelines and steps of the process while focusing upon components of the Space Elevator Preliminary Architecture View. This Preliminary Architecture View is presented as a draft starting point for the Space Elevator Project.

  19. Space Elevator Base Leg Architecture

    NASA Astrophysics Data System (ADS)

    Swan, C.; Swan, P. A.

    While the Space Elevator stretches for 104,000 kilometers, the region of most concern, from the survival perspective, is 2,500 kms and below. The threats inside this dangerous arena include debris, spacecraft, meteorites, lightening, winds, rogue waves, aircraft, and intentional human acts. Two major questions will be addressed that will influence the overall systems architecture of a Space Elevator. While the deployment phase of the development of the Space Elevator will only have a single ribbon from the surface of the Earth to well beyond the Geosynchronous altitude, a mature Space Elevator must never allow a complete sever of the system. Design approaches, materials selections, international policy development and assembly must ensure that the integrity of the Space Elevator be maintained. The trade space analysis will address the probability of an individual ribbon being severed, the length of time to repair, and the potential for a catastrophic Space Elevator cut. The architecture proposed for the base leg portion will address two questions: Shall there be multiple base legs to 2,500 kms altitude? And Should the anchor be based on land or at sea?

  20. Digital map of salt-affected soils of Khakassia

    NASA Astrophysics Data System (ADS)

    Chernousenko, G. I.; Kalinina, N. V.; Rukhovich, D. I.; Koroleva, P. V.

    2012-11-01

    A new methodological approach aimed at the creation and correction of digital soil maps on the basis of systematized and georeferenced available cartographic and attribute information arranged into a GIS project has been tested. The particular stages and methods of the creation of a digital map of salt-affected soils of Khakassia with the use of GIS technologies in the ArcInfo format are described. All the available cartographic materials, including the Soils of Russia GIS project, digital elevation models, remote sensing data, and analytical data on 82 soil pits (including the authors' materials and previously published data), have been used for the creation of this new map.

  1. Digital Collections, Digital Libraries and the Digitization of Cultural Heritage Information.

    ERIC Educational Resources Information Center

    Lynch, Clifford

    2002-01-01

    Discusses the development of digital collections and digital libraries. Topics include digitization of cultural heritage information; broadband issues; lack of compelling content; training issues; types of materials being digitized; sustainability; digital preservation; infrastructure; digital images; data mining; and future possibilities for…

  2. US GeoData: Digital cartographic and geographic data

    USGS Publications Warehouse

    ,

    1985-01-01

    The increasing use of computers for storing and analyzing earth science information has sparked a growth in the demand for various types of cartographic data in digital form. The production of map data in computerized form is called digital cartography, and it involves the collection, storage, processing, analysis, and display of map data with the aid of computers. The U.S. Geological Survey, the Nation's largest earth science research agency, has expanded its national mapping program to incorporate operations associated with digital cartography, including the collection of planimetric, elevation, and geographic names information in digital form. This digital information is available for use in meeting the multipurpose needs and applications of the map user community.

  3. 2. 'Tunnel No 6 West End, Front Elevation, Sectional Elevation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. 'Tunnel No 6 West End, Front Elevation, Sectional Elevation on Centerline of Portal,' Southern Pacific Standard Single-Track Tunnel, 1910. Tunnel 6, which today would be Tunnel 20, was daylighted and no longer exists. Compare to photos in documentation sets for Tunnel 23 (HAER No. CA-198), Tunnel 24 (HAER No. CA-200), Tunnel 25 (HAER No. CA-201), Tunnel 27 (HAER No. CA-203), Tunnel 28 (HAER No. CA-204), and Tunnel 29 (HAER No. CA-205). - Central Pacific Transcontinental Railroad, Sacramento to Nevada state line, Sacramento, Sacramento County, CA

  4. Radiation dose reduction in the evaluation of scoliosis: an application of digital radiography

    SciTech Connect

    Kushner, D.C.; Cleveland, R.H.; Herman, T.E.; Zaleske, D.J.; Ehrlich, M.G.; Correia, J.A.

    1986-10-01

    This report documents the clinical testing of scanning beam digital radiography as an imaging method in patients with scoliosis. This type of digital imaging requires a skin exposure of only 2.4 mR (0.619 microC/kg) per image, compared with the lowest possible posteroanterior screen-film exposure of 10 mR (2.58 microC/kg) at the chest and 60 mR (15.48 microC/kg) at the lumbar spine. Digital radiographic and screen-film images were obtained on multiple test objects and 273 patients. Scoliosis measurements using screen-film radiographs and digital radiographs were comparable to within a mean difference of 1 degrees at many different degrees of severity. The low-dose digital images were found to be useful and accurate for the detection and measurement of scoliosis after the first screen-film radiographs have excluded tumors and structural abnormalities.

  5. Converting Topographic Maps into Digital Form to Aid in Archeological Research in the Peten, Guatemala

    NASA Technical Reports Server (NTRS)

    Aldrich, Serena R.

    1999-01-01

    The purpose of my project was to convert a topographical map into digital form so that the data can be manipulated and easily accessed in the field. With the data in this particular format, Dr. Sever and his colleagues can highlight the specific features of the landscape that they require for their research of the ancient Mayan civilization. Digital elevation models (DEMs) can also be created from the digitized contour features adding another dimension to their research.

  6. Digital work-flow

    PubMed Central

    MARSANGO, V.; BOLLERO, R.; D’OVIDIO, N.; MIRANDA, M.; BOLLERO, P.; BARLATTANI, A.

    2014-01-01

    SUMMARY Objective. The project presents a clinical case in which the digital work-flow procedure was applied for a prosthetic rehabilitation in natural teeth and implants. Materials. Digital work-flow uses patient’s photo for the aesthetic’s planning, digital smile technology for the simulation of the final restoration and real time scanning to register the two arches. Than the scanning are sent to the laboratory that proceed with CAD-CAM production. Results. Digital work-flow offers the opportunities to easily speak with laboratory and patients, gives better clinical results and demonstrated to be a less invasiveness method for the patient. Conclusion. Intra-oral scanner, digital smile design, preview using digital wax-up, CAD-CAM production, are new predictable opportunities for prosthetic team. This work-flow, compared with traditional methods, is faster, more precise and predictable. PMID:25694797

  7. Digital Longitudinal Tomosynthesis

    NASA Astrophysics Data System (ADS)

    Rimkus, Daniel Steven

    1985-12-01

    The purpose of this dissertation was to investigate the clinical utility of digital longitudinal tomosynthesis in radiology. By acquiring a finite group of digital images during a longitudinal tomographic exposure, and processing these images, tomographic planes, other than the fulcrum plane, can be reconstructed. This process is now termed "tomosynthesis". A prototype system utilizing this technique was developed. Both phantom and patient studies were done with this system. The phantom studies were evaluated by subjective, visual criterion and by quantitative analysis of edge sharpness and noise in the reconstructions. Two groups of patients and one volunteer were studied. The first patient group consisted of 8 patients undergoing intravenous urography (IVU). These patients had digital tomography and film tomography of the abdomen. The second patient group consisted of 4 patients with lung cancer admitted to the hospital for laser resection of endobronchial tumor. These patients had mediastinal digital tomograms to evaluate the trachea and mainstem bronchi. The knee of one volunteer was imaged by film tomography and digital tomography. The results of the phantom studies showed that the digital reconstructions accurately produced images of the desired planes. The edge sharpness of the reconstructions approached that of the acquired images. Adequate reconstructions were achieved with as few as 5 images acquired during the exposure, with the quality of the reconstructions improving as the number of images acquired increased. The IVU patients' digital studies had less contrast and spatial resolution than the film tomograms. The single renal lesion visible on the film tomograms was also visible in the digital images. The digital mediastinal studies were felt by several radiologists to be superior to a standard chest xray in evaluating the airways. The digital images of the volunteer's knee showed many of the same anatomic features as the film tomogram, but the digital

  8. Digital Sensor Technology

    SciTech Connect

    Thomas, Ken D.; Quinn, Edward L.; Mauck, Jerry L.; Bockhorst, Richard M.

    2015-02-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

  9. Debunking the "Digital Native": Beyond Digital Apartheid, towards Digital Democracy

    ERIC Educational Resources Information Center

    Brown, C.; Czerniewicz, L.

    2010-01-01

    This paper interrogates the currently pervasive discourse of the "net generation" finding the concept of the "digital native" especially problematic, both empirically and conceptually. We draw on a research project of South African higher education students' access to and use of Information and Communication Technologies (ICTs) to show that age is…

  10. Digital In, Digital Out: Digital Editing with Firewire.

    ERIC Educational Resources Information Center

    Doyle, Bob; Sauer, Jeff

    1997-01-01

    Reviews linear and nonlinear digital video (DV) editing equipment and software, using the IEEE 1394 (FireWire) connector. Includes a chart listing specifications and rating eight DV editing systems, reviews two DV still-photo cameras, and previews beta DV products. (PEN)

  11. Exploring digital professionalism.

    PubMed

    Ellaway, Rachel H; Coral, Janet; Topps, David; Topps, Maureen

    2015-01-01

    The widespread use of digital media (both computing devices and the services they access) has blurred the boundaries between our personal and professional lives. Contemporary students are the last to remember a time before the widespread use of the Internet and they will be the first to practice in a largely e-health environment. This article explores concepts of digital professionalism and their place in contemporary medical education, and proposes a series of principles of digital professionalism to guide teaching, learning and practice in the healthcare professions. Despite the many risks and fears surrounding their use, digital media are not an intrinsic threat to medical professionalism. Professionals should maintain the capacity for deliberate, ethical, and accountable practice when using digital media. The authors describe a digital professionalism framework structured around concepts of proficiency, reputation, and responsibility. Digital professionalism can be integrated into medical education using strategies based on awareness, alignment, assessment, and accountability. These principles of digital professionalism provide a way for medical students and medical practitioners to embrace the positive aspects of digital media use while being mindful and deliberate in its use to avoid or minimize any negative consequences. PMID:26030375

  12. Exploring digital professionalism.

    PubMed

    Ellaway, Rachel H; Coral, Janet; Topps, David; Topps, Maureen

    2015-01-01

    The widespread use of digital media (both computing devices and the services they access) has blurred the boundaries between our personal and professional lives. Contemporary students are the last to remember a time before the widespread use of the Internet and they will be the first to practice in a largely e-health environment. This article explores concepts of digital professionalism and their place in contemporary medical education, and proposes a series of principles of digital professionalism to guide teaching, learning and practice in the healthcare professions. Despite the many risks and fears surrounding their use, digital media are not an intrinsic threat to medical professionalism. Professionals should maintain the capacity for deliberate, ethical, and accountable practice when using digital media. The authors describe a digital professionalism framework structured around concepts of proficiency, reputation, and responsibility. Digital professionalism can be integrated into medical education using strategies based on awareness, alignment, assessment, and accountability. These principles of digital professionalism provide a way for medical students and medical practitioners to embrace the positive aspects of digital media use while being mindful and deliberate in its use to avoid or minimize any negative consequences.

  13. Experiments in digital literacy.

    PubMed

    Eshet-Alkali, Yoram; Amichai-Hamburger, Yair

    2004-08-01

    Having digital literacy requires more than just the ability to use software or to operate a digital device; it includes a large variety of complex skills such as cognitive, motoric, sociological, and emotional that users need to have in order to use digital environments effectively. A conceptual model that was recently described by the authors suggests that digital literacy comprises five major digital skills: photo-visual skills ("reading" instructions from graphical displays), reproduction skills (utilizing digital reproduction to create new, meaningful materials from preexisting ones), branching skills (constructing knowledge from non-linear, hypertextual navigation), information skills (evaluating the quality and validity of information), and socio-emotional skills (understanding the "rules" that prevail in cyberspace and applying this understanding in online cyberspace communication). The present paper presents results from a performance-based pioneer study that investigated the application of the above digital literacy skills conceptual model among different groups of scholars. Results clearly indicate that the younger participants performed better than the older ones, with photo-visual and branching literacy tasks, whereas the older participants were found to be more literate in reproduction and information literacy tasks. Research results shed light on the cognitive skills that users utilize in performing with digital environments, and provide educators and software developers with helpful guidelines for designing better user-centered digital environments. PMID:15331029

  14. Digital security technology simplified.

    PubMed

    Scaglione, Bernard J

    2007-01-01

    Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

  15. Digital solar system geology

    NASA Technical Reports Server (NTRS)

    Batson, R. M.; Kozak, R. C.; Isbell, Nancy K.

    1991-01-01

    All available synoptic maps of the solid-surface bodies of the Solar System were digitized for presentation in the planned Atlas of the Solar System by Greeley and Batson. Since the last report (Batson et al., 1990), preliminary Uranian satellite maps were replaced with improved versions, Galilean satellite geology was simplified and digitized, structure was added to many maps, and the maps were converted to a standard format, with corresponding standing colors for the mapped units. Following these changes, the maps were re-reviewed by their authors and are now undergoing final editing before preparation for publication. In some cases (for Mercury, Venus, and Mars), more detailed maps were digitized and then simplified for the Atlas. Other detailed maps are planned to be digitized in the coming year for the Moon and the Galilean satellites. For most of the remaining bodies such as the Uranian satellites, the current digitized versions contain virtually all the detail that can be mapped given the available data; those versions will be unchanged for the Atlas. These digital geologic maps are archived at the digital scale of 1/16 degree/ pixel, in sinusoidal format. The availability of geology of the Solar System in a digital database will facilitate comparisons and integration with other data: digitized lunar geologic maps have already been used in a comparison with Galileo SSI observations of the Moon.

  16. Digitization Best Practices

    SciTech Connect

    Xue, Fei; Holtkamp, Irma S.; Knudson, Frances L.

    2012-07-31

    This project involved performing tests and documenting results to determine best practices for digitizing older print documents. The digitization process is complicated, especially when original documents exhibit non-standard fonts and are faded. Tests focused on solutions to improve high quality scanning, increase OCR accuracy, and efficiently use embedded metadata. Results are summarized. From the test results on the right sides, we know that when we plan to digitize documents, we should balance Quantity and Quality based on our expectation, and then make final decision for the digitization process.

  17. Digital shaded-relief map of Venezuela

    USGS Publications Warehouse

    Garrity, Christopher P.; Hackley, Paul C.; Urbani, Franco

    2004-01-01

    The Digital Shaded-Relief Map of Venezuela is a composite of more than 20 tiles of 90 meter (3 arc second) pixel resolution elevation data, captured during the Shuttle Radar Topography Mission (SRTM) in February 2000. The SRTM, a joint project between the National Geospatial-Intelligence Agency (NGA) and the National Aeronautics and Space Administration (NASA), provides the most accurate and comprehensive international digital elevation dataset ever assembled. The 10-day flight mission aboard the U.S. Space Shuttle Endeavour obtained elevation data for about 80% of the world's landmass at 3-5 meter pixel resolution through the use of synthetic aperture radar (SAR) technology. SAR is desirable because it acquires data along continuous swaths, maintaining data consistency across large areas, independent of cloud cover. Swaths were captured at an altitude of 230 km, and are approximately 225 km wide with varying lengths. Rendering of the shaded-relief image required editing of the raw elevation data to remove numerous holes and anomalously high and low values inherent in the dataset. Customized ArcInfo Arc Macro Language (AML) scripts were written to interpolate areas of null values and generalize irregular elevation spikes and wells. Coastlines and major water bodies used as a clipping mask were extracted from 1:500,000-scale geologic maps of Venezuela (Bellizzia and others, 1976). The shaded-relief image was rendered with an illumination azimuth of 315? and an altitude of 65?. A vertical exaggeration of 2X was applied to the image to enhance land-surface features. Image post-processing techniques were accomplished using conventional desktop imaging software.

  18. Elevation change (2000-2004) on the Malaspina Glacier, Alaska

    NASA Technical Reports Server (NTRS)

    Sauber, J.; Molnia, B.; Carabajal, C.; Luthcke, S.; Muskett, R.

    2005-01-01

    The glaciers of the southeastern Alaska coastal region are the largest temperate glacier meltwater source on Earth and may contribute one third of the total glacier meltwater entering the global ocean. Since melt onset and refreeeze timing in this region show a tendency toward earlier onset and longer ablation seasons, accelerated glacier wastage may be occurring. In this study we focus on one of the largest temperate glacier systems on Earth, the Malaspina Glacier. This glacier, with a length of approximately 110 km and an area of approximately square 5,000 km, has the largest piedmont lobe of any temperate glacier. The entire lobe, which lies at elevations below 600 m, is within the ablation zone. We report and interpret ice elevation change between a digital elevation model (DEM) derived from the Shuttle Radar Topography Mission (SRTM C band) observations in Feb. 2000 and ICESat Laser 1-3 observations between Feb. 2003 and Nov. 2004. We use these elevation change results, along with earlier studies, to address the spatial and temporal variability in wastage of the piedmont lobe. Between 2000 and 2004 ice elevation changes of 10-30 meters occurred across the central Malaspina piedmont lobe. From 1972/73 (USGS DEM) to 1999 (SRTM corrected for estimated winter snow accumulation) Malaspina's (Agassiz, Seward Lobe, and Marvine) mean ice thinning was estimated at -47 m with maximum thinning on parts of the lobes to -160 m. The Malaspina's accumulation area is only slightly larger than its ablation area (2,575 km2 vs. 2,433 km2); unfortunately few glaciological observations are available from this source region. Snow accumulation rates have been largely inferred from low-altitude precipitation and temperature data. Comparing sequential ICESat observations in the Malaspina source region, we estimated short-term elevation increases of up to 5 meters during the winter of 2003/04.

  19. Digital line graphs from 1:24,000-scale maps

    USGS Publications Warehouse

    ,

    1990-01-01

    The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data flles are grouped into four basic types. The first of these, called a Digital Line . Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions that are usually at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as wen as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

  20. Digital line graphs from 1:100,000-scale maps

    USGS Publications Warehouse

    ,

    1989-01-01

    The National Cartographic Information Center (NCIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second form, called a Digital Elevation Model (OEM), consists of a sampled array of elevations for ground positions that are usually, but not always, at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

  1. Towards a Digital Future

    ERIC Educational Resources Information Center

    Thomson, Rachel

    2009-01-01

    A month ago, a French court ruled that internet access is a basic human right. Gordon Brown has said it is as crucial for people as electricity and water. Yet, 17 million Britons are still excluded from digital technology and an estimated 13 per cent of the population--some six million people--are both socially and digitally excluded. There are…

  2. Digital Image Access & Retrieval.

    ERIC Educational Resources Information Center

    Heidorn, P. Bryan, Ed.; Sandore, Beth, Ed.

    Recent technological advances in computing and digital imaging technology have had immediate and permanent consequences for visual resource collections. Libraries are involved in organizing and managing large visual resource collections. The central challenges in working with digital image collections mirror those that libraries have sought to…

  3. Fundamentals of Digital Logic.

    ERIC Educational Resources Information Center

    Noell, Monica L.

    This course is designed to prepare electronics personnel for further training in digital techniques, presenting need to know information that is basic to any maintenance course on digital equipment. It consists of seven study units: (1) binary arithmetic; (2) boolean algebra; (3) logic gates; (4) logic flip-flops; (5) nonlogic circuits; (6)…

  4. Digitized synchronous demodulator

    NASA Technical Reports Server (NTRS)

    Woodhouse, Christopher E. (Inventor)

    1990-01-01

    A digitized synchronous demodulator is constructed entirely of digital components including timing logic, an accumulator, and means to digitally filter the digital output signal. Indirectly, it accepts, at its input, periodic analog signals which are converted to digital signals by traditional analog-to-digital conversion techniques. Broadly, the input digital signals are summed to one of two registers within an accumulator, based on the phase of the input signal and medicated by timing logic. At the end of a predetermined number of cycles of the inputted periodic signals, the contents of the register that accumulated samples from the negative half cycle is subtracted from the accumulated samples from the positive half cycle. The resulting difference is an accurate measurement of the narrow band amplitude of the periodic input signal during the measurement period. This measurement will not include error sources encountered in prior art synchronous demodulators using analog techniques such as offsets, charge injection errors, temperature drift, switching transients, settling time, analog to digital converter missing code, and linearity errors.

  5. Digital Media and Learning

    ERIC Educational Resources Information Center

    John D. and Catherine T. MacArthur Foundation, 2012

    2012-01-01

    MacArthur launched the digital media and learning initiative in 2006 to explore how digital media are changing the way young people learn, socialize, communicate, and play. Since 2006, the Foundation has awarded grants totaling more than $100 million for research, development of innovative new technologies, new learning environments for youth,…

  6. ISDN: The Digital Difference.

    ERIC Educational Resources Information Center

    Piedmo, Greg

    1995-01-01

    Integrated services digital network (ISDN) is a dial-up digital transmission service supporting transmission of audio, video, and text data over standard copper telephone wires or fiber optic cables. Advantages of ISDN over analog transmission include the ability of one phone line to support up to three simultaneous, separate conversations (phone,…

  7. Optimization of digital designs

    NASA Technical Reports Server (NTRS)

    Whitaker, Sterling R. (Inventor); Miles, Lowell H. (Inventor)

    2009-01-01

    An application specific integrated circuit is optimized by translating a first representation of its digital design to a second representation. The second representation includes multiple syntactic expressions that admit a representation of a higher-order function of base Boolean values. The syntactic expressions are manipulated to form a third representation of the digital design.

  8. Digital Signature Management.

    ERIC Educational Resources Information Center

    Hassler, Vesna; Biely, Helmut

    1999-01-01

    Describes the Digital Signature Project that was developed in Austria to establish an infrastructure for applying smart card-based digital signatures in banking and electronic-commerce applications. Discusses the need to conform to international standards, an international certification infrastructure, and security features for a public directory…

  9. Will Digital Texts Succeed?

    ERIC Educational Resources Information Center

    Acker, Stephen R.

    2008-01-01

    With faculty changing instructional practices to take advantage of customizable, focused content (and digital delivery of that content), many people assume that digital distribution is the answer to bringing the costs of course content delivery in line. But the picture just isn't that simple. A wide continuum of options is available to faculty and…

  10. Occupying the Digital Humanities

    ERIC Educational Resources Information Center

    Rice, Jeff

    2013-01-01

    This essay questions the digital humanities' dependence on interpretation and critique as strategies for reading and responding to texts. Instead, the essay proposes suggestion as a digital rhetorical practice, one that does not replace hermeneutics, but instead offers alternative ways to respond to texts. The essay uses the Occupy movement as an…

  11. Educating Digital Citizens

    ERIC Educational Resources Information Center

    Tan, Thomas

    2011-01-01

    Digital citizenship is how educators, citizens, and parents can teach where the lines of cyber safety and ethics are in the interconnected online world their students will inhabit. Aside from keeping technology users safe, digital citizenship also prepares students to survive and thrive in an environment embedded with information, communication,…

  12. Digital Pinhole Camera

    ERIC Educational Resources Information Center

    Lancor, Rachael; Lancor, Brian

    2014-01-01

    In this article we describe how the classic pinhole camera demonstration can be adapted for use with digital cameras. Students can easily explore the effects of the size of the pinhole and its distance from the sensor on exposure time, magnification, and image quality. Instructions for constructing a digital pinhole camera and our method for…

  13. Determining Our Digital Destiny.

    ERIC Educational Resources Information Center

    Tennant, Roy

    2000-01-01

    Discusses future possibilities that libraries must consider in a digital information age. Topics include how the Internet has transformed the way people look for information; the need for better Web search engines; electronic publishing; and an information infrastructure that supports the delivery of digital objects and 24-hour reference service.…

  14. Digital Knowledge Resources

    ERIC Educational Resources Information Center

    Pandian, M. Paul

    2008-01-01

    Technology has revolutionized the concept of libraries. Networking and computing technologies have now become sufficiently advanced to support the design and deployment of large digital libraries which are capable of supporting the conventional end-user functions. Digital libraries are a natural extension of the evolution in which libraries have…

  15. Changing State Digital Libraries

    ERIC Educational Resources Information Center

    Pappas, Marjorie L.

    2006-01-01

    Research has shown that state virtual or digital libraries are evolving into websites that are loaded with free resources, subscription databases, and instructional tools. In this article, the author explores these evolving libraries based on the following questions: (1) How user-friendly are the state digital libraries?; (2) How do state digital…

  16. Music Instruction Goes Digital

    ERIC Educational Resources Information Center

    Demski, Jennifer

    2011-01-01

    Faced with meager enrollment in band, orchestra, and choir programs, schools are using digital technology to excite students about creating music on today's terms. This article discusses how music educators reinvent their profession by acknowledging and incorporating the way students interact with music today--digitally. Bill Evans, a music…

  17. Digital Video Editing

    ERIC Educational Resources Information Center

    McConnell, Terry

    2004-01-01

    Monica Adams, head librarian at Robinson Secondary in Fairfax country, Virginia, states that librarians should have the technical knowledge to support projects related to digital video editing. The process of digital video editing and the cables, storage issues and the computer system with software is described.

  18. Improved digital thermometer design.

    PubMed

    Swift, C S

    1981-01-01

    A simple digital thermometer design using a self-contained 3 1/2 digit LCD meter module is presented. The Celsius-reading (Centigrade) thermometer is powered by a single 9-V battery, has very low power drain, and uses an inexpensive NPN silicon transistor for the temperature sensor. A short bibliography on temperature measurement instrumentation is included. PMID:10253871

  19. Writing and Digital Media

    ERIC Educational Resources Information Center

    van Waes, Luuk, Ed.; Leijten, Marielle, Ed.; Neuwirth, Chris, Ed.

    2006-01-01

    Digital media has become an increasingly powerful force in modern society. This volume brings together outstanding European, American and Australian research in "writing and digital media" and explores its cognitive, social and cultural implications. In addition to presenting programs of original research by internationally known scholars from a…

  20. Creating Digital Authors

    ERIC Educational Resources Information Center

    Zoch, Melody; Langston-DeMott, Brooke; Adams-Budde, Melissa

    2014-01-01

    Elementary students find themselves engaged and learning at a digital writing camp. The authors find that such elementary students usually have limited access to technology at home and school, and posit that teachers should do all they can to give them more access to and experience in digital composing. Students were motivated and learned to use…

  1. Digital communications study

    NASA Technical Reports Server (NTRS)

    Boorstyn, R. R.

    1973-01-01

    Research is reported dealing with problems of digital data transmission and computer communications networks. The results of four individual studies are presented which include: (1) signal processing with finite state machines, (2) signal parameter estimation from discrete-time observations, (3) digital filtering for radar signal processing applications, and (4) multiple server queues where all servers are not identical.

  2. Digital rotation measurement unit

    DOEpatents

    Sanderson, S.N.

    1983-09-30

    A digital rotation indicator is disclosed for monitoring the position of a valve member having a movable actuator. The indicator utilizes mercury switches adapted to move in cooperation with the actuator. Each of the switches produces an output as it changes state when the actuator moves. A direction detection circuit is connected to the switches to produce a first digital signal indicative of the direction of rotation of the actuator. A count pulse generating circuit is also connected to the switches to produce a second digital pulse signal having count pulses corresponding to a change of state of any of the mercury switches. A reset pulse generating circuit is provided to generate a reset pulse each time a count pulse is generated. An up/down counter is connected to receive the first digital pulse signal and the second digital pulse signal and to count the pulses of the second digital pulse signal either up or down depending upon the instantaneous digital value of the first digital signal whereby a running count indicative of the movement of the actuator is maintained.

  3. Parallel digital forensics infrastructure.

    SciTech Connect

    Liebrock, Lorie M.; Duggan, David Patrick

    2009-10-01

    This report documents the architecture and implementation of a Parallel Digital Forensics infrastructure. This infrastructure is necessary for supporting the design, implementation, and testing of new classes of parallel digital forensics tools. Digital Forensics has become extremely difficult with data sets of one terabyte and larger. The only way to overcome the processing time of these large sets is to identify and develop new parallel algorithms for performing the analysis. To support algorithm research, a flexible base infrastructure is required. A candidate architecture for this base infrastructure was designed, instantiated, and tested by this project, in collaboration with New Mexico Tech. Previous infrastructures were not designed and built specifically for the development and testing of parallel algorithms. With the size of forensics data sets only expected to increase significantly, this type of infrastructure support is necessary for continued research in parallel digital forensics. This report documents the implementation of the parallel digital forensics (PDF) infrastructure architecture and implementation.

  4. 46 CFR 120.540 - Elevators.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Elevators. 120.540 Section 120.540 Shipping COAST GUARD... Requirements § 120.540 Elevators. Each elevator on a vessel must meet the requirements of American National Standards Institute (ANSI) A17.1. “Safety Code for Elevators, and Escalators,” or other standard...

  5. 46 CFR 120.540 - Elevators.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Elevators. 120.540 Section 120.540 Shipping COAST GUARD... Requirements § 120.540 Elevators. Each elevator on a vessel must meet the requirements of American National Standards Institute (ANSI) A17.1. “Safety Code for Elevators, and Escalators,” or other standard...

  6. Digital biology and chemistry.

    PubMed

    Witters, Daan; Sun, Bing; Begolo, Stefano; Rodriguez-Manzano, Jesus; Robles, Whitney; Ismagilov, Rustem F

    2014-09-01

    This account examines developments in "digital" biology and chemistry within the context of microfluidics, from a personal perspective. Using microfluidics as a frame of reference, we identify two areas of research within digital biology and chemistry that are of special interest: (i) the study of systems that switch between discrete states in response to changes in chemical concentration of signals, and (ii) the study of single biological entities such as molecules or cells. In particular, microfluidics accelerates analysis of switching systems (i.e., those that exhibit a sharp change in output over a narrow range of input) by enabling monitoring of multiple reactions in parallel over a range of concentrations of signals. Conversely, such switching systems can be used to create new kinds of microfluidic detection systems that provide "analog-to-digital" signal conversion and logic. Microfluidic compartmentalization technologies for studying and isolating single entities can be used to reconstruct and understand cellular processes, study interactions between single biological entities, and examine the intrinsic heterogeneity of populations of molecules, cells, or organisms. Furthermore, compartmentalization of single cells or molecules in "digital" microfluidic experiments can induce switching in a range of reaction systems to enable sensitive detection of cells or biomolecules, such as with digital ELISA or digital PCR. This "digitizing" offers advantages in terms of robustness, assay design, and simplicity because quantitative information can be obtained with qualitative measurements. While digital formats have been shown to improve the robustness of existing chemistries, we anticipate that in the future they will enable new chemistries to be used for quantitative measurements, and that digital biology and chemistry will continue to provide further opportunities for measuring biomolecules, understanding natural systems more deeply, and advancing molecular and

  7. Global multi-resolution terrain elevation data 2010 (GMTED2010)

    USGS Publications Warehouse

    Danielson, Jeffrey J.; Gesch, Dean B.

    2011-01-01

    In 1996, the U.S. Geological Survey (USGS) developed a global topographic elevation model designated as GTOPO30 at a horizontal resolution of 30 arc-seconds for the entire Earth. Because no single source of topographic information covered the entire land surface, GTOPO30 was derived from eight raster and vector sources that included a substantial amount of U.S. Defense Mapping Agency data. The quality of the elevation data in GTOPO30 varies widely; there are no spatially-referenced metadata, and the major topographic features such as ridgelines and valleys are not well represented. Despite its coarse resolution and limited attributes, GTOPO30 has been widely used for a variety of hydrological, climatological, and geomorphological applications as well as military applications, where a regional, continental, or global scale topographic model is required. These applications have ranged from delineating drainage networks and watersheds to using digital elevation data for the extraction of topographic structure and three-dimensional (3D) visualization exercises (Jenson and Domingue, 1988; Verdin and Greenlee, 1996; Lehner and others, 2008). Many of the fundamental geophysical processes active at the Earth's surface are controlled or strongly influenced by topography, thus the critical need for high-quality terrain data (Gesch, 1994). U.S. Department of Defense requirements for mission planning, geographic registration of remotely sensed imagery, terrain visualization, and map production are similarly dependent on global topographic data. Since the time GTOPO30 was completed, the availability of higher-quality elevation data over large geographic areas has improved markedly. New data sources include global Digital Terrain Elevation Data (DTEDRegistered) from the Shuttle Radar Topography Mission (SRTM), Canadian elevation data, and data from the Ice, Cloud, and land Elevation Satellite (ICESat). Given the widespread use of GTOPO30 and the equivalent 30-arc

  8. The Digital Carrot, the Digital Stick

    ERIC Educational Resources Information Center

    Jackson, Gregory A.

    2007-01-01

    In this article, the author asserts that technology is not the answer to digital piracy at colleges and universities. Citing the three most common explanations given for copyright infringement--that students cannot always get what they want, cannot always use what they can get, or think the price of what they can get is unfair--he asserts that the…

  9. From Digital Divide to Digital Democracy.

    ERIC Educational Resources Information Center

    de los Santos, Gerardo E., Ed.; de los Santos, Alfredo G., Jr., Ed.; Milliron, Mark David, Ed.

    This publication is one of many efforts of the League for Innovation in the Community College to address the issue of societal technology access and learning needs. This work addresses the issue of the digital divide, which includes the often conflicting perspectives of information technology (IT) access and literacy needs held by government…

  10. Computing Logarithms Digit-by-Digit

    ERIC Educational Resources Information Center

    Goldberg, Mayer

    2005-01-01

    In this work, we present an algorithm for computing logarithms of positive real numbers, that bears structural resemblance to the elementary school algorithm of long division. Using this algorithm, we can compute successive digits of a logarithm using a 4-operation pocket calculator. The algorithm makes no use of Taylor series or calculus, but…

  11. Digital Booktalk: Digital Media for Reluctant Readers

    ERIC Educational Resources Information Center

    Gunter, Glenda; Kenny, Robert

    2008-01-01

    New learning and communications paradigms of today's learners are extending the definition of literacy and directly affecting how reading and writing skills are acquired (Leu, 2000). Mirroring an ever-expanding definition of literacy, new college and K-12 curricular programs that redefine digital media are popping up all over the country. Story is…

  12. Ion implantation at elevated temperatures

    SciTech Connect

    Lam, N.Q.; Leaf, G.K.

    1985-11-01

    A kinetic model has been developed to investigate the synergistic effects of radiation-enhanced diffusion, radiation-induced segregation and preferential sputtering on the spatial redistribution of implanted solutes during implantation at elevated temperatures. Sample calculations were performed for Al and Si ions implanted into Ni. With the present model, the influence of various implantation parameters on the evolution of implant concentration profiles could be examined in detail.

  13. Science on a space elevator

    SciTech Connect

    Laubscher, B. E.; Jorgensen, A. M.

    2004-01-01

    The Space Elevator (SE) represents a major paradigm shift in space access. If the SE's promise of low cost access can be realized, everything becomes economically more feasible to accomplish in space. In this paper we describe in-situ science stations mounted on a science-dedicated space elevator tether. The concept presented here involves a carbon nanotube ribbon that is constructed by an existing space elevator and then science sensors are stationed along the ribbon at differing altitudes. The finished ribbon can be moved across the earth to the position at which its scientific measurements are to be taken. The ability to station scientific, in-situ instrumentation at different altitudes for round-the-clock observations is a unique capability of the SE. The environments that the science packages sense range from the troposphere out beyond the magnetopause of the magnetosphere on the solar side of the earth. Therefore, the very end of the SE can sense the solar wind. The measurements at various points along its length include temperature, pressure, density, sampling, chemical analyses, wind speed, turbulence, free oxygen, electromagnetic radiation, cosmic rays, energetic particles and plasmas in the earth's magnetosphere and the solar wind. There exist some altitudes that are difficult to access with aircraft or balloons or rockets and so remain relatively unexplored. The space elevator solves these problems and opens these regions up to in-situ measurements. Without the need for propulsion, the SE provides a more benign and pristine environment for atmospheric measurements than available with powered aircraft. Moreover, replacing and upgrading instrumentation is expected to be very cost effective with the SE. Moving and stationing the science SE affords the opportunity to sense multiple regions of the atmosphere. The SE's geosynchronous, orbital motion through the magnetosphere, albeit nominally with Earth's magnetic field, will trace a plane through that region

  14. The integrated analyses of digital field mapping techniques and traditional field methods: implications from the Burdur-Fethiye Shear Zone, SW Turkey as a case-study

    NASA Astrophysics Data System (ADS)

    Elitez, İrem; Yaltırak, Cenk; Zabcı, Cengiz; Şahin, Murat

    2015-04-01

    The precise geological mapping is one of the most important issues in geological studies. Documenting the spatial distribution of geological bodies and their contacts play a crucial role on interpreting the tectonic evolution of any region. Although the traditional field techniques are still accepted to be the most fundamental tools in construction of geological maps, we suggest that the integration of digital technologies to the classical methods significantly increases the resolution and the quality of such products. We simply follow the following steps in integration of the digital data with the traditional field observations. First, we create the digital elevation model (DEM) of the region of interest by interpolating the digital contours of 1:25000 scale topographic maps to 10 m of ground pixel resolution. The non-commercial Google Earth satellite imagery and geological maps of previous studies are draped over the interpolated DEMs in the second stage. The integration of all spatial data is done by using the market leading GIS software, ESRI ArcGIS. We make the preliminary interpretation of major structures as tectonic lineaments and stratigraphic contacts. These preliminary maps are controlled and precisely coordinated during the field studies by using mobile tablets and/or phablets with GPS receivers. The same devices are also used in measuring and recording the geologic structures of the study region. Finally, all digitally collected measurements and observations are added to the GIS database and we finalise our geological map with all available information. We applied this integrated method to map the Burdur-Fethiye Shear Zone (BFSZ) in the southwest Turkey. The BFSZ is an active sinistral 60-to-90 km-wide shear zone, which prolongs about 300 km-long between Suhut-Cay in the northeast and Köyceğiz Lake-Kalkan in the southwest on land. The numerous studies suggest contradictory models not only about the evolution but also about the fault geometry of this

  15. Fast transient digitizer

    DOEpatents

    Villa, Francesco

    1982-01-01

    Method and apparatus for sequentially scanning a plurality of target elements with an electron scanning beam modulated in accordance with variations in a high-frequency analog signal to provide discrete analog signal samples representative of successive portions of the analog signal; coupling the discrete analog signal samples from each of the target elements to a different one of a plurality of high speed storage devices; converting the discrete analog signal samples to equivalent digital signals; and storing the digital signals in a digital memory unit for subsequent measurement or display.

  16. Digital sonar system

    DOEpatents

    Young, K.K.; Wilkes, R.J.

    1995-11-21

    A transponder of an active digital sonar system identifies a multifrequency underwater activating sonar signal received from a remote sonar transmitter. The transponder includes a transducer that receives acoustic waves, including the activating sonar signal, and generates an analog electrical receipt signal. The analog electrical receipt signal is converted to a digital receipt signal and cross-correlated with a digital transmission signal pattern corresponding to the activating sonar signal. A relative peak in the cross-correlation value is indicative of the activating sonar signal having been received by the transponder. In response to identifying the activating sonar signal, the transponder transmits a responding multifrequency sonar signal. 4 figs.

  17. Digital sonar system

    DOEpatents

    Young, Kenneth K.; Wilkes, R. Jeffrey

    1995-01-01

    A transponder of an active digital sonar system identifies a multifrequency underwater activating sonar signal received from a remote sonar transmitter. The transponder includes a transducer that receives acoustic waves, including the activating sonar signal, and generates an analog electrical receipt signal. The analog electrical receipt signal is converted to a digital receipt signal and cross-correlated with a digital transmission signal pattern corresponding to the activating sonar signal. A relative peak in the cross-correlation value is indicative of the activating sonar signal having been received by the transponder. In response to identifying the activating sonar signal, the transponder transmits a responding multifrequency sonar signal.

  18. Digital Citizenship Means Character Education for the Digital Age

    ERIC Educational Resources Information Center

    Ohler, Jason

    2011-01-01

    The reality of students' cyber lives has thrust upon educators a new approach: creating character education programs tuned to digital youth that are both proactive and aggressive. Taking this approach will help integrate students' digital activities within the context of the communities in which they live, both local and digital. The digital age…

  19. Digital Library and Digital Reference Service: Integration and Mutual Complementarity

    ERIC Educational Resources Information Center

    Liu, Jia

    2008-01-01

    Both the digital library and the digital reference service were invented and have been developed under the networked environment. Among their intersections, the fundamental thing is their symbiotic interest--serving the user in a more efficient way. The article starts by discussing the digital library and its service and the digital reference…

  20. Digital Citizenship Means Character Education for the Digital Age

    ERIC Educational Resources Information Center

    Ohler, Jason

    2012-01-01

    The reality of students' cyber lives has thrust upon educators a new approach: creating character education programs tuned to digital youth that are proactive and aggressive. This will help integrate students' digital activities within the context of the communities in which they live, both local and digital. The digital age beckons a new era of…

  1. First Digit Law and Its Application to Digital Forensics

    NASA Astrophysics Data System (ADS)

    Shi, Yun Q.

    Digital data forensics, which gathers evidence of data composition, origin, and history, is crucial in our digital world. Although this new research field is still in its infancy stage, it has started to attract increasing attention from the multimedia-security research community. This lecture addresses the first digit law and its applications to digital forensics. First, the Benford and generalized Benford laws, referred to as first digit law, are introduced. Then, the application of first digit law to detection of JPEG compression history for a given BMP image and detection of double JPEG compressions are presented. Finally, applying first digit law to detection of double MPEG video compressions is discussed. It is expected that the first digit law may play an active role in other task of digital forensics. The lesson learned is that statistical models play an important role in digital forensics and for a specific forensic task different models may provide different performance.

  2. Implantable digital hearing aid

    NASA Technical Reports Server (NTRS)

    Kissiah, A. M., Jr.

    1979-01-01

    Hearing aid converts analog output of microphone into digital pulses in about 10 channels of audiofrequencies. Each pulse band could be directly connected to portion of auditory nerve most sensitive to that range.

  3. Digital ac monitor

    DOEpatents

    Hart, G.W.; Kern, E.C. Jr.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer. 24 figs.

  4. Digital ac monitor

    DOEpatents

    Hart, George W.; Kern, Jr., Edward C.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer.

  5. Preservation of Digital Objects.

    ERIC Educational Resources Information Center

    Galloway, Patricia

    2004-01-01

    Presents a literature review that covers the following topics related to preservation of digital objects: practical examples; stakeholders; recordkeeping standards; genre-specific problems; trusted repository standards; preservation methods; preservation metadata standards; and future directions. (Contains 82 references.) (MES)

  6. Replantation of digits

    MedlinePlus

    ... include: Reactions to medications Problems breathing Bleeding Infection Death of the replanted tissue Reduced nerve function or movement in the replanted digit Stiffness of the fingers Pain that continues after surgery

  7. Survey of digital filtering

    NASA Technical Reports Server (NTRS)

    Nagle, H. T., Jr.

    1972-01-01

    A three part survey is made of the state-of-the-art in digital filtering. Part one presents background material including sampled data transformations and the discrete Fourier transform. Part two, digital filter theory, gives an in-depth coverage of filter categories, transfer function synthesis, quantization and other nonlinear errors, filter structures and computer aided design. Part three presents hardware mechanization techniques. Implementations by general purpose, mini-, and special-purpose computers are presented.

  8. 1998 Digital Avionics Highlights

    NASA Technical Reports Server (NTRS)

    Polites, Michael E.

    1998-01-01

    This article summarizes the highlights of recent events and developments in digital avionics in space, aircraft, and weapons. The article is about 1,200 words long. Information for the article was collected from members of the Digital Avionics Technical Committee of the American Institute of Aeronautics and Astronautics. This information was previously cleared by the members' parent organization. Information for the article was also gathered from Aviation Week and Space Technology and similar sources.

  9. Sloan digital sky survey

    SciTech Connect

    Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G.; Lupton, R.

    1994-04-01

    The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

  10. Digital Video and Interactivity

    NASA Astrophysics Data System (ADS)

    Morelli, Alysson K.; Chaves, Gabriel C.; Belchior, Tiago M.

    With the growth of digital video technology, the authors have chosen to explore the potential of the DVD, in terms of interactivity. The research aims at understanding the interaction possibilities of digital video in a DVD player, while still keeping the narrative constraints. This paper explains the project, the resulting DVD, and shows that the relation of the spectator to a video can be changed by the interaction.

  11. Digital adaptive sampling.

    NASA Technical Reports Server (NTRS)

    Breazeale, G. J.; Jones, L. E.

    1971-01-01

    Discussion of digital adaptive sampling, which is consistently better than fixed sampling in noise-free cases. Adaptive sampling is shown to be feasible and, it is considered, should be studied further. It should be noted that adaptive sampling is a class of variable rate sampling in which the variability depends on system signals. Digital rather than analog laws should be studied, because cases can arise in which the analog signals are not even available. An extremely important problem is implementation.

  12. The Digital Cytocochleogram.

    PubMed

    Santi, P A; Blair, A; Bohne, B A; Lukkes, J; Nietfeld, J

    2004-06-01

    The Mouse Cochlea Database (MCD) is a collection of resources that include digital images and bibliographic information on the mouse cochlea and is available at: http://mousecochlea.ccgb.umn.edu. The purpose of this communication is to report on the development of one MCD resource: the Digital Cytocochleogram. A cytocochleogram is a graphic representation of the anatomical state of the hair cells along the complete width and length of the organ of Corti. The Digital Cytocochleogram provides Internet users with a complete collection of digital images of one or more surface preparations of the mouse organ of Corti from which morphometric information can be obtained. By moving a mouse driven, screen cursor over a digital image, the location and approximate frequency region of the anatomical structure is displayed. Users can also measure the straight-line distance between any two structures on the image. The Digital Cytocochleogram resource uses two software programs, the Coordinate Finder and Viewer, which are written as CGI scripts. The Coordinate Finder program maps each digital image to an X,Y coordinate system. The total length of the organ of Corti from all tissue segments is computed using an arc-distance approximation formula, with the lateral border of the inner pillar cell headplates serving as a trace line or reference location. After all of the digital images of the tissue segments are mapped, they are placed on the MCD Website where users can use the Viewer program to view and morphometrically assess structures using a web browser. A single, complete surface preparation from a normal mouse is presently available on the MCD website. As the MCD grows, additional images of surface preparations at different magnifications from normal, mutant, and experimentally altered mouse cochleas will become available.

  13. Escaping the Digital Dark Age.

    ERIC Educational Resources Information Center

    Brand, Stewart

    1999-01-01

    Discusses the loss of stored knowledge due to the continuous obsolescence of digital formats and platforms. Topics include digital storage versus digital preservation; the use of metadata and efforts to create standards for it; information on the Internet; and the need for long-term planning to solve digital degradation. (LRW)

  14. Digital and analog communication systems

    NASA Technical Reports Server (NTRS)

    Shanmugam, K. S.

    1979-01-01

    The book presents an introductory treatment of digital and analog communication systems with emphasis on digital systems. Attention is given to the following topics: systems and signal analysis, random signal theory, information and channel capacity, baseband data transmission, analog signal transmission, noise in analog communication systems, digital carrier modulation schemes, error control coding, and the digital transmission of analog signals.

  15. Elevated plus maze for mice.

    PubMed

    Komada, Munekazu; Takao, Keizo; Miyakawa, Tsuyoshi

    2008-01-01

    Although the mouse genome is now completely sequenced, the functions of most of the genes expressed in the brain are not known. The influence of a given gene on a specific behavior can be determined by behavioral analysis of mutant mice. If a target gene is expressed in the brain, behavioral phenotype of the mutant mice could elucidate the genetic mechanism of normal behaviors. The elevated plus maze test is one of the most widely used tests for measuring anxiety-like behavior. The test is based on the natural aversion of mice for open and elevated areas, as well as on their natural spontaneous exploratory behavior in novel environments. The apparatus consists of open arms and closed arms, crossed in the middle perpendicularly to each other, and a center area. Mice are given access to all of the arms and are allowed to move freely between them. The number of entries into the open arms and the time spent in the open arms are used as indices of open space-induced anxiety in mice. Unfortunately, the procedural differences that exist between laboratories make it difficult to duplicate and compare results among laboratories. Here, we present a detailed movie demonstrating our protocol for the elevated plus maze test. In our laboratory, we have assessed more than 90 strains of mutant mice using the protocol shown in the movie. These data will be disclosed as a part of a public database that we are now constructing. Visualization of the protocol will promote better understanding of the details of the entire experimental procedure, allowing for standardization of the protocols used in different laboratories and comparisons of the behavioral phenotypes of various strains of mutant mice assessed using this test.

  16. Lunar Pole Illumination and Communications Maps Computed from GSSR Elevation Data

    NASA Technical Reports Server (NTRS)

    Bryant, Scott

    2009-01-01

    A Digital Elevation Model of the lunar south pole was produced using Goldstone Solar System RADAR (GSSR) data obtained in 2006.12 This model has 40-meter horizontal resolution and about 5-meter relative vertical accuracy. This Digital Elevation Model was used to compute average solar illumination and Earth visibility with 100 kilometers of the lunar south pole. The elevation data were converted into local terrain horizon masks, then converted into lunar-centric latitude and longitude coordinates. The horizon masks were compared to latitude, longitude regions bounding the maximum Sun and Earth motions relative to the moon. Estimates of Earth visibility were computed by integrating the area of the region bounding the Earth's motion that was below the horizon mask. Solar illumination and other metrics were computed similarly. Proposed lunar south pole base sites were examined in detail, with the best site showing yearly solar power availability of 92 percent and Direct-To-Earth (DTE) communication availability of about 50 percent. Similar analysis of the lunar south pole used an older GSSR Digital Elevation Model with 600-meter horizontal resolution. The paper also explores using a heliostat to reduce the photovoltaic power system mass and complexity.

  17. Glacier-specific elevation changes in western Alaska

    NASA Astrophysics Data System (ADS)

    Paul, Frank; Le Bris, Raymond

    2013-04-01

    Deriving glacier-specific elevation changes from DEM differencing and digital glacier outlines is rather straight-forward if the required datasets are available. Calculating such changes over large regions and including glaciers selected for mass balance measurements in the field, provides a possibility to determine the representativeness of the changes observed at these glaciers for the entire region. The related comparison of DEM-derived values for these glaciers with the overall mean avoids the rather error-prone conversion of volume to mass changes (e.g. due to unknown densities) and gives unit-less correction factors for upscaling the field measurements to a larger region. However, several issues have to be carefully considered, such as proper co-registration of the two DEMs, date and accuracy of the datasets compared, as well as source data used for DEM creation and potential artefacts (e.g. voids). In this contribution we present an assessment of the representativeness of the two mass balance glaciers Gulkana and Wolverine for the overall changes of nearly 3200 glaciers in western Alaska over a ca. 50-year time period. We use an elevation change dataset from a study by Berthier et al. (2010) that was derived from the USGS DEM of the 1960s (NED) and a more recent DEM derived from SPOT5 data for the SPIRIT project. Additionally, the ASTER GDEM was used as a more recent DEM. Historic glacier outlines were taken from the USGS digital line graph (DLG) dataset, corrected with the digital raster graph (DRG) maps from USGS. Mean glacier specific elevation changes were derived based on drainage divides from a recently created inventory. Land-terminating, lake-calving and tidewater glaciers were marked in the attribute table to determine their changes separately. We also investigated the impact of handling potential DEM artifacts in three different ways and compared elevation changes with altitude. The mean elevation changes of Gulkana and Wolverine glaciers (about -0

  18. Diffusion rates for elevated releases

    SciTech Connect

    Ramsdell, J.V.

    1983-11-01

    A search of the literature related to diffusion from elevated sources has determined that an adequate data base exists for use in developing parameterizations for estimating diffusion rates for material released from free standing stacks at nuclear power plants. A review of published data analyses indicates that a new parameterization of horizontal diffusion rates specifically for elevated releases is not likely to significantly change the magnitudes of horizontal diffusion coefficients on the average. However, the uncertainties associated with horizontal diffusion coefficient estimates under any given set of atmospheric conditions could be reduced by a new parameterization. Similarly, a new parameterization of vertical diffusion rates would be unlikely to significantly alter the magnitudes of diffusion coefficients for unstable atmospheric conditons. However, for neutral and stable atmospheric conditions, a new parameterization of vertical diffusion rates might increase vertical diffusion coefficients significantly. The increase would move ground-level time-integrated concentration maxima closer to the plant and would increase the maxima. 55 references, 2 figures, 4 tables.

  19. Intelligent elevator management system using image processing

    NASA Astrophysics Data System (ADS)

    Narayanan, H. Sai; Karunamurthy, Vignesh; Kumar, R. Barath

    2015-03-01

    In the modern era, the increase in the number of shopping malls and industrial building has led to an exponential increase in the usage of elevator systems. Thus there is an increased need for an effective control system to manage the elevator system. This paper is aimed at introducing an effective method to control the movement of the elevators by considering various cases where in the location of the person is found and the elevators are controlled based on various conditions like Load, proximity etc... This method continuously monitors the weight limit of each elevator while also making use of image processing to determine the number of persons waiting for an elevator in respective floors. Canny edge detection technique is used to find out the number of persons waiting for an elevator. Hence the algorithm takes a lot of cases into account and locates the correct elevator to service the respective persons waiting in different floors.

  20. From Digital Divides to Digital Inequality -- The Emerging Digital Inequality in the Norwegian Unitarian School

    ERIC Educational Resources Information Center

    Krumsvik, Rune J.

    2008-01-01

    This position paper highlights existing and emerging, prospective digital divides in Norwegian schools and asks whether we are now moving from traditional digital divides to digital inequality in our digitized society and schools. Despite very good technology density in Norwegian society and schools in general, there is the reason to pay attention…

  1. USING 30-METER RESOLUTION DIGITAL ELEVATION DATA FOR BASIN ANALYSIS-A PRACTICAL UTILIZATION OF USGS 24K DIGITAL ELEVATION DATA-COMPLICATIONS AND SOLUTIONS. (R826595)

    EPA Science Inventory

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  2. The oscillating wing with aerodynamically balanced elevator

    NASA Technical Reports Server (NTRS)

    Kussner, H G; Schwartz, I

    1941-01-01

    The two-dimensional problem of the oscillating wing with aerodynamically balanced elevator is treated in the manner that the wing is replaced by a plate with bends and stages and the airfoil section by a mean line consisting of one or more straights. The computed formulas and tables permit, on these premises, the prediction of the pressure distribution and of the aerodynamic reactions of oscillating elevators and tabs with any position of elevator hinge in respect to elevator leading edge.

  3. Elevations and Distances in the United States.

    ERIC Educational Resources Information Center

    Geological Survey (Dept. of Interior), Reston, VA.

    One of a series of general interest publications on science topics, the booklet provides those interested in elevations and distances with a nontechnical introduction to the subject. The entire document consists of statistical charts depicting the nation's 50 largest cities, extreme and mean elevations, elevations of named summits over 14,000 feet…

  4. 76 FR 62329 - Proposed Flood Elevation Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... SECURITY Federal Emergency Management Agency 44 CFR Part 67 Proposed Flood Elevation Determinations... 46715-46716 was printed incorrectly. It was corrected and appears below: * Elevation in feet (NGVD) + Elevation in feet (NAVD) Depth in feet above Flooding source(s) Location of referenced ground...

  5. 46 CFR 183.540 - Elevators.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... INSTALLATION Miscellaneous Systems and Requirements § 183.540 Elevators. Each elevator on a vessel must meet the requirements of ANSI A 17.1 (incorporated by reference; see 46 CFR 175.600) or other standard... 46 Shipping 7 2011-10-01 2011-10-01 false Elevators. 183.540 Section 183.540 Shipping COAST...

  6. 46 CFR 183.540 - Elevators.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... INSTALLATION Miscellaneous Systems and Requirements § 183.540 Elevators. Each elevator on a vessel must meet the requirements of ANSI A 17.1 (incorporated by reference; see 46 CFR 175.600) or other standard... 46 Shipping 7 2010-10-01 2010-10-01 false Elevators. 183.540 Section 183.540 Shipping COAST...

  7. Digital Actuator Technology

    SciTech Connect

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  8. National Guidelines for Digital Camera Systems Certification

    NASA Astrophysics Data System (ADS)

    Yaron, Yaron; Keinan, Eran; Benhamu, Moshe; Regev, Ronen; Zalmanzon, Garry

    2016-06-01

    Digital camera systems are a key component in the production of reliable, geometrically accurate, high-resolution geospatial products. These systems have replaced film imaging in photogrammetric data capturing. Today, we see a proliferation of imaging sensors collecting photographs in different ground resolutions, spectral bands, swath sizes, radiometric characteristics, accuracies and carried on different mobile platforms. In addition, these imaging sensors are combined with navigational tools (such as GPS and IMU), active sensors such as laser scanning and powerful processing tools to obtain high quality geospatial products. The quality (accuracy, completeness, consistency, etc.) of these geospatial products is based on the use of calibrated, high-quality digital camera systems. The new survey regulations of the state of Israel specify the quality requirements for each geospatial product including: maps at different scales and for different purposes, elevation models, orthophotographs, three-dimensional models at different levels of details (LOD) and more. In addition, the regulations require that digital camera systems used for mapping purposes should be certified using a rigorous mapping systems certification and validation process which is specified in the Director General Instructions. The Director General Instructions for digital camera systems certification specify a two-step process as follows: 1. Theoretical analysis of system components that includes: study of the accuracy of each component and an integrative error propagation evaluation, examination of the radiometric and spectral response curves for the imaging sensors, the calibration requirements, and the working procedures. 2. Empirical study of the digital mapping system that examines a typical project (product scale, flight height, number and configuration of ground control points and process). The study examine all the aspects of the final product including; its accuracy, the product pixels size

  9. Digital imaging in dentistry.

    PubMed

    Essen, S Donovan

    2011-01-01

    Information technology is vital to operations, marketing, accounting, finance and administration. One of the most exciting and quickly evolving technologies in the modern dental office is digital applications. The dentist is often the business manager, information technology officer and strategic planning chief for his small business. The information systems triangle applies directly to this critical manager supported by properly trained ancillary staff and good equipment. With emerging technology driving all medical disciplines and the rapid pace at which it emerges, it is vital for the contemporary practitioner to keep abreast of the newest information technology developments. This article compares the strategic and operational advantages of digital applications, specifically imaging. The focus of this paper will be on digital radiography (DR), 3D computerized tomography, digital photography and digitally-driven CAD/CAM to what are now considered obsolescing modalities and contemplates what may arrive in the future. It is the purpose of this essay to succinctly evaluate the decisions involved in the role, application and implications of employing this tool in the dental environment PMID:22132658

  10. Digital imaging in dentistry.

    PubMed

    Essen, S Donovan

    2011-01-01

    Information technology is vital to operations, marketing, accounting, finance and administration. One of the most exciting and quickly evolving technologies in the modern dental office is digital applications. The dentist is often the business manager, information technology officer and strategic planning chief for his small business. The information systems triangle applies directly to this critical manager supported by properly trained ancillary staff and good equipment. With emerging technology driving all medical disciplines and the rapid pace at which it emerges, it is vital for the contemporary practitioner to keep abreast of the newest information technology developments. This article compares the strategic and operational advantages of digital applications, specifically imaging. The focus of this paper will be on digital radiography (DR), 3D computerized tomography, digital photography and digitally-driven CAD/CAM to what are now considered obsolescing modalities and contemplates what may arrive in the future. It is the purpose of this essay to succinctly evaluate the decisions involved in the role, application and implications of employing this tool in the dental environment

  11. Digital voltmeter technology acquisition

    NASA Astrophysics Data System (ADS)

    Chen, Qilin; Cui, Jianping

    1985-09-01

    China began its development of digital voltmeter at a fairly early stage. In 1965, the Beijing Radio Technology Research Bureau had already built a 5 digit voltmeter whose technical performance was comparable to the international standards at that time. However, at the present time, of the more than 50 models of 5 digit voltmeters produced by State designated factories, only 2 or 3 use the international standard interface and microcomputer technology; furthermore, due to the limited capability in processing, equipment and testing, they cannot be mass produced. As a result, the gap between the Chinese standard and international standard in digital voltmeter is further widened. The Beijing Radio Technology Institute prepared a plan to import the manufacturing technology of the 8520A digital system multimeters from the U.S. FLUKE Co., by using foreign exchange funds designated for mechanical and electrical instruments under the joint technology and trade program. In September 1981, an official contract and an agreement for technology cooperation were signed. The items imported to the 8520A technology and trade program can be divided into several stages: (1) import automated test and standard systems which are built using advanced technologies of the 1980's; (2) train personnel and begin production; (3) import key production equipment to coordinate with China's existing facilities; (4) modify the production lines based on FLUKE's advanced technology and begin CKD production; and (5) use the results of imported technologies in other research projects to stimulate development in related technologies.

  12. Digital image processing.

    PubMed

    Lo, Winnie Y; Puchalski, Sarah M

    2008-01-01

    Image processing or digital image manipulation is one of the greatest advantages of digital radiography (DR). Preprocessing depends on the modality and corrects for system irregularities such as differential light detection efficiency, dead pixels, or dark noise. Processing is manipulation of the raw data just after acquisition. It is generally proprietary and specific to the DR vendor but encompasses manipulations such as unsharp mask filtering within two or more spatial frequency bands, histogram sliding and stretching, and gray scale rendition or lookup table application. These processing steps have a profound effect on the final appearance of the radiograph, but they can also lead to artifacts unique to digital systems. Postprocessing refers to manipulation of the final appearance of the radiograph by the end-user and does not involve alteration of the raw data.

  13. Photon counting digital holography

    NASA Astrophysics Data System (ADS)

    Demoli, Nazif; Skenderović, Hrvoje; Stipčević, Mario; Pavičić, Mladen

    2016-05-01

    Digital holography uses electronic sensors for hologram recording and numerical method for hologram reconstruction enabling thus the development of advanced holography applications. However, in some cases, the useful information is concealed in a very wide dynamic range of illumination intensities and successful recording requires an appropriate dynamic range of the sensor. An effective solution to this problem is the use of a photon-counting detector. Such detectors possess counting rates of the order of tens to hundreds of millions counts per second, but conditions of recording holograms have to be investigated in greater detail. Here, we summarize our main findings on this problem. First, conditions for optimum recording of digital holograms for detecting a signal significantly below detector's noise are analyzed in terms of the most important holographic measures. Second, for time-averaged digital holograms, optimum recordings were investigated for exposures shorter than the vibration cycle. In both cases, these conditions are studied by simulations and experiments.

  14. Interactive digital signal processor

    NASA Technical Reports Server (NTRS)

    Mish, W. H.; Wenger, R. M.; Behannon, K. W.; Byrnes, J. B.

    1982-01-01

    The Interactive Digital Signal Processor (IDSP) is examined. It consists of a set of time series analysis Operators each of which operates on an input file to produce an output file. The operators can be executed in any order that makes sense and recursively, if desired. The operators are the various algorithms used in digital time series analysis work. User written operators can be easily interfaced to the sysatem. The system can be operated both interactively and in batch mode. In IDSP a file can consist of up to n (currently n=8) simultaneous time series. IDSP currently includes over thirty standard operators that range from Fourier transform operations, design and application of digital filters, eigenvalue analysis, to operators that provide graphical output, allow batch operation, editing and display information.

  15. Compensated digital readout family

    NASA Technical Reports Server (NTRS)

    Ludwig, David E.; Skow, Michael

    1991-01-01

    ISC has completed test on an IC which has 32 channels of amplifiers, low pass anti-aliasing filters, 13-bit analog-to-digital (A/D) converters with non-uniformity correction per channel and a digital multiplexer. The single slope class of A/D conversion is described, as are the unique variations required for incorporation of this technique for use with on-focal plane detector readout electronics. This paper describes the architecture used to implement the digital on-focal plane signal processing functions. Results from measured data on a test IC are presented for a circuit containing these functions operating at a sensor frame rate of 1000 hertz.

  16. Secure medical digital libraries.

    PubMed

    Papadakis, I; Chrissikopoulos, V; Polemi, D

    2001-12-01

    In this paper, a secure medical digital library is presented. It is based on the CORBA specifications for distributed systems. The described approach relies on a three-tier architecture. Interaction between the medical digital library and its users is achieved through a Web server. The choice of employing Web technology for the dissemination of medical data has many advantages compared to older approaches, but also poses extra requirements that need to be fulfilled. Thus, special attention is paid to the distinguished nature of such medical data, whose integrity and confidentiality should be preserved at all costs. This is achieved through the employment of Trusted Third Parties (TTP) technology for the support of the required security services. Additionally, the proposed digital library employs smartcards for the management of the various security tokens that are used from the above services.

  17. Digital magnetic temperature transducer.

    NASA Technical Reports Server (NTRS)

    Tchernev, D. I.; Collier, T. E.

    1971-01-01

    A new digital magnetic temperature transducer is reported. The device utilizes the discontinuous behavior of the initial permeability with temperature at the Curie temperature of some magnetic materials. Since the Curie temperature is determined by the chemical and crystallographic composition of the particular material only, the transducer requires no calibration and has extremely high stability and reproducibility with time. The output of the transducer is inherently digital and, therefore, is directly compatible with the digital information processing and control without A/D conversion. The temperature-sensing portion of the transducer consists only of magnetic cores and wire and, therefore, has extremely high reliability, is shock and radiation insensitive, small, and virtually indestructible.

  18. Digital signal coding

    SciTech Connect

    Gaunt, R.

    1997-05-01

    It seems that digital video has gone by as many names as Jim Blinn has Siggraph ribbons. Some of its various formats and names are: DV, Dl, 4:2:2, CCIR 601-1, ITU-Rec. 601-4,, SMPTE RP125M, and SMPTE 259M. CCIR and CCITT were both absorbed into their parent organization, the International Telecommunications Union (ITU), so technically speaking, CCIR 601 has been renamed to ITU-Rec. 601-4 (``Rec.`` stands for recommendation). But convention is often hard to change, so for some time you will see and hear Dl and CCIR 601 used for serial digital component video. Below are brief descriptions of the various names and formats for digital video.

  19. Comparative digital holography.

    PubMed

    Osten, Wolfgang; Baumbach, Torsten; Jüptner, Werner

    2002-01-01

    We described a method for direct holographic comparison of the shape or the deformation of two objects when it is not necessary that both samples be located at the same place. In contrast to the well-known incoherent techniques based on inverse fringe projection, this new approach uses a coherent mask that is imaged onto a sample object that has a microstructure different from that of the master object. The coherent mask is created by digital holography to permit instant access to complete optical information on the master object at any wanted place. Transmission of the digital master holograms to the relevant places can be made with a broadband digital telecommunication network such as the Internet.

  20. Digital cinema video compression

    NASA Astrophysics Data System (ADS)

    Husak, Walter

    2003-05-01

    The Motion Picture Industry began a transition from film based distribution and projection to digital distribution and projection several years ago. Digital delivery and presentation offers the prospect to increase the quality of the theatrical experience for the audience, reduce distribution costs to the distributors, and create new business opportunities for the theater owners and the studios. Digital Cinema also presents an opportunity to provide increased flexibility and security of the movies for the content owners and the theater operators. Distribution of content via electronic means to theaters is unlike any of the traditional applications for video compression. The transition from film-based media to electronic media represents a paradigm shift in video compression techniques and applications that will be discussed in this paper.

  1. What is digital medicine?

    PubMed

    Shaffer, David Williamson; Kigin, Colleen M; Kaput, James J; Gazelle, G Scott

    2002-01-01

    Changes in health care are a fundamental part of social and intellectual evolution. The modern practice of scientific medicine depends on the existence of the written and printed word to store medical information. Because computers can transform information as well as store it, new digital tools cannot only record clinical data, they can also generate medical knowledge. In doing so, they make it possible to develop "digital medicine" that is potentially more precise, more effective, more experimental, more widely distributed, and more egalitarian than current medical practice. Critical steps in the creation of digital medicine are careful analysis of the impact of new technologies and coordinated efforts to direct technological development towards creating a new paradigm of medical care.

  2. Digital optical conversion module

    DOEpatents

    Kotter, D.K.; Rankin, R.A.

    1988-07-19

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  3. Digital optical conversion module

    DOEpatents

    Kotter, Dale K.; Rankin, Richard A.

    1991-02-26

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

  4. Autonomic and prefrontal events during moral elevation.

    PubMed

    Piper, Walter T; Saslow, Laura R; Saturn, Sarina R

    2015-05-01

    Moral elevation, or elevation, is a specific emotional state triggered by witnessing displays of profound virtue and moral beauty. This study set out to characterize the physiology underlying elevation with measurements of heart rate (HR), respiratory sinus arrhythmia (RSA), and medial prefrontal cortex (mPFC) activity. During elevation, HR and RSA increased. These findings illustrate that elevation involves an uncommon combination of both sympathetic and parasympathetic activation, which is present in circumstances where arousal and social engagement are both required. In addition, we show evidence of content-dependent alterations of mPFC activity during elevation peaks. Altogether, this study shows that the induction of moral elevation recruits an uncommon autonomic and neural pattern that is consistent with previous understanding of socioemotional-induced allostasis.

  5. Autonomic and prefrontal events during moral elevation.

    PubMed

    Piper, Walter T; Saslow, Laura R; Saturn, Sarina R

    2015-05-01

    Moral elevation, or elevation, is a specific emotional state triggered by witnessing displays of profound virtue and moral beauty. This study set out to characterize the physiology underlying elevation with measurements of heart rate (HR), respiratory sinus arrhythmia (RSA), and medial prefrontal cortex (mPFC) activity. During elevation, HR and RSA increased. These findings illustrate that elevation involves an uncommon combination of both sympathetic and parasympathetic activation, which is present in circumstances where arousal and social engagement are both required. In addition, we show evidence of content-dependent alterations of mPFC activity during elevation peaks. Altogether, this study shows that the induction of moral elevation recruits an uncommon autonomic and neural pattern that is consistent with previous understanding of socioemotional-induced allostasis. PMID:25813121

  6. Monitoring Cyp2b10 mRNA expression at cessation of 2-year carcinogenesis bioassay in mouse liver provides evidence for a carcinogenic mechanism devoid of human relevance: The dalcetrapib experience

    SciTech Connect

    Hoflack, J-C.; Mueller, L. Fowler, S.; Braendli-Baiocco, A.; Flint, N.; Kuhlmann, O.; Singer, T.; Roth, A.

    2012-03-15

    Introduction: Dalcetrapib is a cholesteryl ester transfer protein (CETP) modulator in clinical assessment for cardiovascular outcome benefits. In compliance with regulatory requirements, dalcetrapib was evaluated in rodent 2-year carcinogenesis bioassays. In the mouse bioassay, male mice demonstrated increased liver weight and statistically increased incidences of hepatocellular adenoma/carcinoma. Hepatic cytochrome p450 (Cyp) 2b10 mRNA induction and increased Cyp2b10 enzyme activity signify activation of hepatic nuclear receptor constitutive androstane receptor (CAR), a widely established promoter of rodent-specific hepatic tumors. We therefore monitored hepatic Cyp2b10 mRNA and its enzyme activity in a subset of dalcetrapib-treated male mice from the bioassay. Methods: Liver samples were obtained from ∼ 1/3 of male mice from each dose group including vehicle-controls (mean and earliest study day of death 678 and 459 respectively). Quantitative real time PCR (qRT-PCR) was performed to determine Cyp2b10 mRNA expression and Cyp1a-, Cyp2b10- and Cyp3a-selective activities were monitored. Results: Cyp2b10 mRNA was strongly induced by dalcetrapib with an expected wide inter-individual variation (5–1421-fold). Group average fold-induction versus vehicle-controls showed a dose-related increase from 48-fold (250 mg/kg/day) to 160-fold (750 mg/kg/day), which declined slightly at 2000 mg/kg/day (97-fold). Cyp enzyme activities showed approximate doubling of total Cyp P450 content per milligram protein and a 9-fold increase in Cyp2b10-selective pentoxyresorufin O-dealkylase activity (750 mg/kg/day). Discussion: These data from hepatic Cyp2b10 monitoring are strongly suggestive of CAR activation by dalcetrapib, a mechanism devoid of relevance towards hepatocarcinogenesis in humans; results show feasibility of Cyp2b10 as a surrogate marker for this mechanism at cessation of a carcinogenesis bioassay. -- Highlights: ► Liver tumors were induced in male mice by dalcetrapib

  7. Calculation of the temperature in the container unit with a modified design for the production of {sup 99}Mo at the VVR-Ts research reactor facility (IVV.10M)

    SciTech Connect

    Kazantsev, A. A.; Sergeev, V. V.; Kochnov, O. Yu.

    2015-12-15

    The temperature regime is calculated for two different designs of containers with uranium-bearing material for the upgraded VVR-Ts research reactor facility (IVV.10M). The containers are to be used in the production of {sup 99}Mo. It is demonstrated that the modification of the container design leads to a considerable temperature reduction and an increase in the near-wall boiling margin and allows one to raise the amount of material loaded into the container. The calculations were conducted using the international thermohydraulic contour code TRAC intended to analyze the technical safety of water-cooled nuclear power units.

  8. Calculation of the temperature in the container unit with a modified design for the production of 99Mo at the VVR-Ts research reactor facility (IVV.10M)

    NASA Astrophysics Data System (ADS)

    Kazantsev, A. A.; Sergeev, V. V.; Kochnov, O. Yu.

    2015-12-01

    The temperature regime is calculated for two different designs of containers with uranium-bearing material for the upgraded VVR-Ts research reactor facility (IVV.10M). The containers are to be used in the production of 99Mo. It is demonstrated that the modification of the container design leads to a considerable temperature reduction and an increase in the near-wall boiling margin and allows one to raise the amount of material loaded into the container. The calculations were conducted using the international thermohydraulic contour code TRAC intended to analyze the technical safety of water-cooled nuclear power units.

  9. 74. East elevation of elevated Mainline structure (Section F6) looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    74. East elevation of elevated Mainline structure (Section F-6) looking West - along the Arborway toward the masonry bridge carrying the former New Haven R.R. tracks over the Arborway. Arborway overpass is at upper right. - Boston Elevated Railway, Elevated Mainline, Washington Street, Boston, Suffolk County, MA

  10. Sloan Digital Sky Survey

    SciTech Connect

    Kent, S.M.

    1993-11-01

    The Solan Digital Sky Survey is a project which will produce a detailed digital phometric map of half the northern sky to about 23 magnitude using a special purpose wide field telescope of 2.5 meter aperture. This map will be used to select about a million galaxies and 100,000 quasars, for which high resolution spectra will be obtained using the same telescope. A catalog will be produced of all the detected objects, about 100 million galaxies and a similar number of stars, and a million quasar candidates.

  11. Digital DICOM in Dentistry

    PubMed Central

    Burgess, Jeff

    2015-01-01

    Similar to Medicine, digital communication, information processing, and x-ray imaging have changed the face of dentistry. The incorporation of digital systems into medical and dental practice has necessitated development of a standard that allows reliable transmission of information between the devices taking the images, devices storing the images, and devices displaying the images. This standard is termed as DICOM. The following article briefly reviews how DICOM came about, how dentistry is involved, the various elements that are part of the DICOM system, and how DICOM is currently used in dentistry. PMID:26464603

  12. Digital Image Correlation Engine

    SciTech Connect

    Turner, Dan; Crozier, Paul; Reu, Phil

    2015-10-06

    DICe is an open source digital image correlation (DIC) tool intended for use as a module in an external application or as a standalone analysis code. It's primary capability is computing full –field displacements and strains from sequences of digital These images are typically of a material sample undergoing a materials characterization experiment, but DICe is also useful for other applications (for example, trajectory tracking). DICe is machine portable (Windows, Linux and Mac) and can be effectively deployed on a high performance computing platform. Capabilities from DICe can be invoked through a library interface, via source code integration of DICe classes or through a graphical user interface.

  13. Digital Radio Frequency Memories

    NASA Astrophysics Data System (ADS)

    Hey-Shipton, Gregory L.

    The Digital RF Memory (DRFM) is gradually replacing the recirculating Frequency Memory Loop (FML). The shortcomings of the FML in the area of limited storage time, single signal processing, and limited ECM capabilities are overcome by the use of the DRFM. There are several architectures for the DRFM but all of them accomplish the same basic function: to convert an incoming RF signal to a low enough frequency to allow storage in a digital memory and subsequent upconversion to the original signal frequency. Multiple signal handling capabilities on a pulse by pulse basis and software controlled ECM generation make the DRFM a powerful addition to any ECM suite.

  14. Error detection and rectification in digital terrain models

    NASA Technical Reports Server (NTRS)

    Hannah, M. J.

    1979-01-01

    Digital terrain models produced by computer correlation of stereo images are likely to contain occasional gross errors in terrain elevation. These errors typically result from having mismatched sub-areas of the two images, a problem which can occur for a variety of image- and terrain-related reasons. Such elevation errors produce undesirable effects when the models are further processed, and should be detected and corrected as early in the processing as possible. Algorithms have been developed to detect and correct errors in digital terrain models. These algorithms focus on the use of constraints on both the allowable slope and the allowable change in slope in local areas around each point. Relaxation-like techniques are employed in the iteration of the detection and correction phases to obtain best results.

  15. The 3D Elevation Program initiative: a call for action

    USGS Publications Warehouse

    Sugarbaker, Larry J.; Constance, Eric W.; Heidemann, Hans Karl; Jason, Allyson L.; Lukas, Vicki; Saghy, David L.; Stoker, Jason M.

    2014-01-01

    The 3D Elevation Program (3DEP) initiative is accelerating the rate of three-dimensional (3D) elevation data collection in response to a call for action to address a wide range of urgent needs nationwide. It began in 2012 with the recommendation to collect (1) high-quality light detection and ranging (lidar) data for the conterminous United States (CONUS), Hawaii, and the U.S. territories and (2) interferometric synthetic aperture radar (ifsar) data for Alaska. Specifications were created for collecting 3D elevation data, and the data management and delivery systems are being modernized. The National Elevation Dataset (NED) will be completely refreshed with new elevation data products and services. The call for action requires broad support from a large partnership community committed to the achievement of national 3D elevation data coverage. The initiative is being led by the U.S. Geological Survey (USGS) and includes many partners—Federal agencies and State, Tribal, and local governments—who will work together to build on existing programs to complete the national collection of 3D elevation data in 8 years. Private sector firms, under contract to the Government, will continue to collect the data and provide essential technology solutions for the Government to manage and deliver these data and services. The 3DEP governance structure includes (1) an executive forum established in May 2013 to have oversight functions and (2) a multiagency coordinating committee based upon the committee structure already in place under the National Digital Elevation Program (NDEP). The 3DEP initiative is based on the results of the National Enhanced Elevation Assessment (NEEA) that was funded by NDEP agencies and completed in 2011. The study, led by the USGS, identified more than 600 requirements for enhanced (3D) elevation data to address mission-critical information requirements of 34 Federal agencies, all 50 States, and a sample of private sector companies and Tribal and local

  16. Simulation of braided river elevation model time series with multiple-point statistics

    NASA Astrophysics Data System (ADS)

    Pirot, Guillaume; Straubhaar, Julien; Renard, Philippe

    2014-06-01

    A new method is proposed to generate successive topographies in a braided river system. Indeed, braided river morphology models are a key factor influencing river-aquifer interactions and have repercussions in ecosystems, flood risk or water management. It is essentially based on multivariate multiple-point statistics simulations and digital elevation models as training data sets. On the one hand, airborne photography and LIDAR acquired at successive time steps have contributed to a better understanding of the geomorphological processes although the available data are sparse over time and river scales. On the other hand, geostatistics provide simulation tools for multiple and continuous variables, which allow the exploration of the uncertainty of many assumption scenarios. Illustration of the approach demonstrates the ability of multiple-point statistics to produce realistic topographies from the information provided by digital elevation models at two time steps.

  17. Digital Natives and Digital Immigrants: Teaching with Technology

    ERIC Educational Resources Information Center

    Martin, Ellen Marie Peterson

    2011-01-01

    Education is witnessing an increasing demand for technology use in the classroom. At the same time, new teachers are entering the profession in high numbers, some being labeled as "Digital Natives" while others are labeled "Digital Immigrants". This qualitative case study investigated the technology practices of Digital Native and Digital…

  18. Digital Downsides: Exploring University Students' Negative Engagements with Digital Technology

    ERIC Educational Resources Information Center

    Selwyn, Neil

    2016-01-01

    Digital technologies are now an integral feature of university study. As such, academic research has tended to concentrate on the potential of digital technologies to support, extend and even "enhance" student learning. This paper, in contrast, explores the rather more messy realities of students' engagements with digital technology. In…

  19. Digital Storytelling as an Interactive Digital Media Context

    ERIC Educational Resources Information Center

    Anderson, Kate T.; Chua, Puay Hoe

    2010-01-01

    Digital storytelling involves the creation of short, personal narratives combining images, sounds, and text in a multimedia computer-based platform. In education, digital storytelling has been used to foster learning in formal and informal spaces worldwide. The authors offer a critical discussion of claims about digital storytelling's usefulness…

  20. Digital Preservation in Open-Source Digital Library Software

    ERIC Educational Resources Information Center

    Madalli, Devika P.; Barve, Sunita; Amin, Saiful

    2012-01-01

    Digital archives and digital library projects are being initiated all over the world for materials of different formats and domains. To organize, store, and retrieve digital content, many libraries as well as archiving centers are using either proprietary or open-source software. While it is accepted that print media can survive for centuries with…