Science.gov

Sample records for 1175-5326 print edition

  1. [Textual research of existing block-printed edition of Source of Acupuncture and Moxibustion (Zhenjiu Fengyuan)].

    PubMed

    Soldan, Jan; Ren, Yu-Lan; Zou, Peng; Liang, Fan-Rong

    2013-08-01

    Based on comprehensive arrangement and analysis of edition origin and development, system, characteristic, archive holding situation of Zhenjiu Fengyuan (Source of Acupuncture and Moxibustion writlen) by LI Xue-chuan in Qing dynasty, the error and mistakes in Summary of TCM Ancient books in China, Union Catalog of TCM Books and Grand Chinese Dictionary of Medical Books are pointed out. On the other hand, under full evaluation and comparison among three types of block-printed editions, Dihua Caotang edition in 2 years of Daoguang emperor, Qing Dynasty (about 1822) that is collected in the library of Beijing University of CM is considered as good edition. PMID:24195227

  2. Journal of Teaching in Marriage and Family: Innovations in Family Science Education. Archival Print Edition, 2001.

    ERIC Educational Resources Information Center

    Gentry, Deborah, Ed.

    2002-01-01

    This document comprises the archival print edition of the first volume of a quarterly electronic journal providing a forum for information on leading-edge teaching innovations and research findings in the field of family science. The foci of the journal are the family science curriculum, instruction issues, evaluation and assessment, and…

  3. The first printed edition of Tycho's 1004 star catalogue

    NASA Astrophysics Data System (ADS)

    Truffa, Giancarlo

    One of the most important contribution to astronomy by Tycho Brahe has been the preparation of a star catalogue based on new observations. It is known in two versions, the shorter with 777 stars, was published in the first volume of Astronomiae Instauratae Progymnasmata, published in 1602 after Tycho's death. The longest version, containing 1004 stars, was distributed in manuscript form by Tycho himself only to important people, scientists and rulers, of his time as testified by the extant copies. This version is commonly considered to be printed for the first time by Kepler as an appendix to the Rudolphine Tables. Indeed it was printed in 1604 by a little known Italian mathematician, Francesco Pifferi, who, using the manuscripts sent to Magini and to the Venice Republic, inserted the new star catalogue in his Italian translation of Clavius' In Sphaeram Ioannis de Sacro Bosco commentarius. This work had very little distribution and the few references to it in contemporary works did not mentioned the new additions so it was completely forgotten.

  4. Dyed and Printed Textiles: Javanese Batik [and] Dutch Wax Prints [and] West African Adire. Third Edition.

    ERIC Educational Resources Information Center

    Burke, Sue

    Three booklets focusing on dyed and printed textile techniques of Java, West Africa, and the Netherlands describe historical and ethnographic materials as well as the development of particular technical traditions. Each section may be used alone or with either or both of the others. When used together, these booklets illustrate the…

  5. Printing Appleworks V1.3 Spreadsheet Files Using the Apple IIe Computer. First Edition.

    ERIC Educational Resources Information Center

    Schlenker, Richard M.; Schlenker, Deborah S.

    This guide was developed as a "how to" training device for printing spreadsheet files using AppleWorks on the Apple IIe computer with a Duodisk or two disk drives. Step-by-step instructions are provided for selecting the print option; printing entire files; and for printing specific rows, columns, or blocks of the file. For each step, a diagram of…

  6. Printing Appleworks V1.3 Word Processor Files Using the Apple IIe Computer. First Edition.

    ERIC Educational Resources Information Center

    Schlenker, Richard M.; Schlenker, Deborah S.

    This guide was developed as a "how to" training device for printing word processor files using AppleWorks on the Apple IIe computer with a Duodisk or two disk drives. Step-by-step instructions are provided for file loading, selecting the print option, and printing files. For each procedure, a diagram of the screen display is included. (GL)

  7. [Review on fragmentary volume of original block - printed edition of Nan jing ben yi (Gist of the Classic of Questioning)].

    PubMed

    Shi, Changyong

    2002-01-01

    Nan jing ben yi (Gist of the Classic of Questioning) was written by Hua Shou of the Yuan dynasty. The extant first volume of the original block - printed edition, revised by Lü Fu, was collected in the Library of China Academy of Military Medical Science. There is a preface written by Jie Hong, a Director Ministry of Techndogy in 1366 at the front of this volume. The red seal in the first page showed that it had been collected by Yun Xiang, Pan Zuyin et al. It is highly possible that this volume is the only existing copy. PMID:12015054

  8. Printing and Publishing Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

    ERIC Educational Resources Information Center

    Bureau of Labor Statistics (DOL), Washington, DC.

    Focusing on printing and publishing occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include newspaper reporters, photographers,…

  9. The Effect of Format on Performance: Editing Text in Print versus Digital Formats

    ERIC Educational Resources Information Center

    Eden, Sigal; Eshet-Alkalai, Yoram

    2013-01-01

    In light of the present-day proliferation of digital texts and the increase in situations that require active digital text reading in learning, it is becoming increasingly important to shed light on the comparison between print and digital reading under active reading conditions. In this study, the active reading abilities of 93 university…

  10. [An introduction on the editions of Zhang Gao's Yi shuo (Medical Narrations)].

    PubMed

    Wang, Xuguang; Lu, Xiang

    2014-11-01

    Zhang Gao's Yi shuo (Medical Narrations) of the Southern Song Dynasty had 2 kinds of editions: domestic editions and foreign editions. The former includes 1 Song edition, 14 Ming editions, 3 Qing editions and 25 editions after the Republic of China. The latter, mainly 2 classes, the Japanese edition and Korean printing type edition. In the Ming Dynasty, the editions of Yi shuo generated 2 branches: inherited edition and supplementary edition. The inherited editions include Gu Dingfang's edition, Zhang Yaode's edition, Wu Mianxue's edition, Wu Zhongheng's edition, Wang Kentang's edition, editions from Si ku quan shu (Imperial Collection of Four), stereotype edition of the 3th year of Xuantong reign (1911) from Shanghai Civilization Bookstore, edition of the 2(nd) year of Manji of Japan etc. The supplemental editions include Zhang Zili's edition, Shen Fan's edition, Fu Feng'ao's edition, transcript of the late Ming Dynasty preserved in the Library of Peking University, and Korean printing type edition etc. PMID:25620361

  11. Consumer Education Resources Catalog: 16mm Films, Multi Media Kits, Video Cassettes, Simulations & Games, Printed Materials. 1978 Edition.

    ERIC Educational Resources Information Center

    Jones, Sandra; Neal, Kathy

    This consumer education resources catalog provides an annotated guide to 16mm films, multi-media kits, video cassettes, simulations and games, and printed materials related to consumer education available from Michigan Department of Education's Regional Education Media Centers. The first major section lists available media by specific subject…

  12. [Textual research on the edition of WU Kun's books].

    PubMed

    Wang, Xu-Guang; Lu, Xiang

    2013-03-01

    WU Kun is a famous physician of the Xin'an School. He wrote a 6-volume Yi fang kao (Textual Research on Recipes) in 1584, a 24-volume Wu zhu su wen (Wu's Annotation of Plain Questions) in 1594, a 6-volume Zhen fang liu ji (Six Collections of Acupuncture and Prescription) in 1618 block-printed and funded by CHENG Biao, and a 2-volume Mai yu (Language of Pulse) with writing date unknown. For Yi fang kao, there were 4 editions, including Ming-dynasty block-printed edition, Japanese and Korean block-printed edition, old hand-copied edition and modern printing edition. For Wu zhu su wen, there were 5 editions, Ming-Qing-dynasty block-printed edition, Japanese block-printed edition, old hand-copied edition, photocopy and modern edition. For Zhen fang liu ji, there were Ming-dynasty block-printed edition, hand-copied edition, photocopy and modern edition. Mai yu always was printed together with Yi fang kao, and its editions were same as those of Yi fang kao, except some modern printing edition with Mai yu excluded. PMID:24135480

  13. Science Policy: A Working Glossary. Fourth Edition. Committee on Science and Technology, U.S. House of Representatives, Ninety-Fifth Congress, Second Session. Committee Print.

    ERIC Educational Resources Information Center

    Huddle, Franklin P., Ed.; Carlson, Elaine, Ed.

    Presented is the fourth edition of the Working Glossary on Science Policy, prepared by the Congressional Research Service for the Subcommittee on Science, Research and Technology in the House of Representatives. The purpose of the glossary is to facilitate communication between Congress and persons engaged in the study of science policy. This…

  14. The New Grolier Multimedia Encyclopedia 1994 Edition.

    ERIC Educational Resources Information Center

    Online Libraries and Microcomputers, 1994

    1994-01-01

    Reviews the 1994 edition of "The New Grolier Multimedia Encyclopedia" which is available on CD-ROM. Topics addressed include video files; content; ease of use; system requirements; cost; and print capabilities. (LRW)

  15. Leaf Printing.

    ERIC Educational Resources Information Center

    Mitchell, Charles W.

    1985-01-01

    Using many different media, students can turn leaves into images which can be used for study, bulletin boards, collections, and identification. The simple techniques described include pastel printing, smoke prints, ink or tempura printing, bleach printing on t-shirts, ditto machine printing using carbon paper, and making cutouts. (DH)

  16. Print. Outreach Series Paper Number 1.

    ERIC Educational Resources Information Center

    Assael, Daniel; Trohanis, Pascal

    A brief introduction outlines a general print product planning, production, and distribution process which is followed by explanations of 26 print process concepts with references to the ideas of experts in the field. The alphabetically-arranged concepts include audience, brochures, content, disclaimers, editing, format, grammar, halftones, inks,…

  17. Resources on Professional Development Schools: An Annotated Bibliography and Resource Guide. Third Edition.

    ERIC Educational Resources Information Center

    Abdal-Haqq, Ismat, Comp.

    This third edition includes 136 annotations and abstracts on Professional Development Schools (PDSs). Most resources are published since 1997. Because earlier editions of this publication are now out of print, annotations of several works from the second edition were chosen for inclusion in the current edition. In many cases, the older entries…

  18. The Print and Computer Enlargement System--PACE. Final Report.

    ERIC Educational Resources Information Center

    Morford, Ronald A.

    The Print and Computer Enlargement (PACE) System is being designed as a portable computerized reading and writing system that enables a low-vision person to read regular print and then create and edit text using large-print computerized output. The design goal was to develop a system that: weighed no more than 12 pounds so it could be easily…

  19. 48 CFR 1352.208-70 - Restrictions on printing and duplicating.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ....208-70 Restrictions on printing and duplicating. As prescribed in 48 CFR 1308.802-70, insert the... Government Printing and Binding Regulations. (b) This clause does not preclude writing, editing,...

  20. Image analysis of Renaissance copperplate prints

    NASA Astrophysics Data System (ADS)

    Hedges, S. Blair

    2008-02-01

    From the fifteenth to the nineteenth centuries, prints were a common form of visual communication, analogous to photographs. Copperplate prints have many finely engraved black lines which were used to create the illusion of continuous tone. Line densities generally are 100-2000 lines per square centimeter and a print can contain more than a million total engraved lines 20-300 micrometers in width. Because hundreds to thousands of prints were made from a single copperplate over decades, variation among prints can have historical value. The largest variation is plate-related, which is the thinning of lines over successive editions as a result of plate polishing to remove time-accumulated corrosion. Thinning can be quantified with image analysis and used to date undated prints and books containing prints. Print-related variation, such as over-inking of the print, is a smaller but significant source. Image-related variation can introduce bias if images were differentially illuminated or not in focus, but improved imaging technology can limit this variation. The Print Index, the percentage of an area composed of lines, is proposed as a primary measure of variation. Statistical methods also are proposed for comparing and identifying prints in the context of a print database.

  1. The Best of "The Running Record." Revised Edition.

    ERIC Educational Resources Information Center

    Reading Recovery Council of North America, Columbus, OH.

    This revised edition of the first volume of the "Best of the Running Record Newsletter" contains 23 articles published between March 1989 and Spring 1998--some selections are from the now out-of-print first edition. Articles are arranged by subject matter to assist the reader in finding articles which address a particular point of interest.…

  2. Printed Electronics

    NASA Technical Reports Server (NTRS)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2015-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  3. Printed electronics

    NASA Technical Reports Server (NTRS)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel A. (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2012-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  4. Printed Electronics

    NASA Technical Reports Server (NTRS)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel A. (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2014-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  5. Asia: A Guide to Paperbacks. Revised Edition.

    ERIC Educational Resources Information Center

    Embree, Ainslie T., Ed.

    The guide includes in-print titles which were listed in the original guide and the supplement, new titles which appeared between December 1965 and December 1967, books published in 1968 provided by some publishers, and a few titles omitted from earlier editions. All the books are listed alphabetically by author within five subject areas:…

  6. ASIA A Guide to Paperbacks. Revised Edition.

    ERIC Educational Resources Information Center

    Embree, Ainslie T., Ed.

    The guide includes in-print titles which were listed in the original guide and the supplement, new titles which appeared between December 1965 and December 1967, books published in 1968 provided by some publishers, and a few titles omitted from earlier editions. All the books are listed alphabetically by author within five subject areas:…

  7. Molecular printing

    PubMed Central

    Braunschweig, Adam B.; Huo, Fengwei; Mirkin, Chad A.

    2014-01-01

    Molecular printing techniques, which involve the direct transfer of molecules to a substrate with submicrometre resolution, have been extensively developed over the past decade and have enabled many applications. Arrays of features on this scale have been used to direct materials assembly, in nanoelectronics, and as tools for genetic analysis and disease detection. The past decade has witnessed the maturation of molecular printing led by two synergistic technologies: dip-pen nanolithography and soft lithography. Both are characterized by material and substrate flexibility, but dip-pen nanolithography has unlimited pattern design whereas soft lithography has limited pattern flexibility but is low in cost and has high throughput. Advances in DPN tip arrays and inking methods have increased the throughput and enabled applications such as multiplexed arrays. A new approach to molecular printing, polymer-pen lithography, achieves low-cost, high-throughput and pattern flexibility. This Perspective discusses the evolution and future directions of molecular printing. PMID:21378889

  8. How We 3D-Print Aerogel

    SciTech Connect

    2015-04-23

    A new type of graphene aerogel will make for better energy storage, sensors, nanoelectronics, catalysis and separations. Lawrence Livermore National Laboratory researchers have made graphene aerogel microlattices with an engineered architecture via a 3D printing technique known as direct ink writing. The research appears in the April 22 edition of the journal, Nature Communications. The 3D printed graphene aerogels have high surface area, excellent electrical conductivity, are lightweight, have mechanical stiffness and exhibit supercompressibility (up to 90 percent compressive strain). In addition, the 3D printed graphene aerogel microlattices show an order of magnitude improvement over bulk graphene materials and much better mass transport.

  9. Printed photodetectors

    NASA Astrophysics Data System (ADS)

    Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

    2015-10-01

    Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems.

  10. Unit: Petroleum, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of a unit on petroleum developed for the Australian Science Education Project. The package contains the teacher's edition of the written material and a script for a film entitled "The Extraordinary Experience of Nicholas Nodwell" emphasizing the uses of petroleum and petroleum products in daily life and designed to…

  11. Modern Newspaper Editing. Second Edition.

    ERIC Educational Resources Information Center

    Gilmore, Gene; Root, Robert

    This volume explains recent technological changes in newspaper publication, comments on how the copy editor must adjust to facilitate these changes, and provides a discussion of some of the ethical and moral questions which every editor must face in appraising the news, in deciding what to print and what to feature, and in displaying material. The…

  12. WikiPrints: rendering enterprise Wiki content for printing

    NASA Astrophysics Data System (ADS)

    Berkner, Kathrin

    2010-02-01

    Wikis have become a tool of choice for collaborative, informative communication. In contrast to the immense Wikipedia, that serves as a reference web site and typically covers only one topic per web page, enterprise wikis are often used as project management tools and contain several closely related pages authored by members of one project. In that scenario it is useful to print closely related content for review or teaching purposes. In this paper we propose a novel technique for rendering enterprise wiki content for printing called WikiPrints, that creates a linearized version of wiki content formatted as a mixture between web layout and conventional document layout suitable for printing. Compared to existing print options for wiki content, Wikiprints automatically selects content from different wiki pages given user preferences and usage scenarios. Meta data such as content authors or time of content editing are considered. A preview of the linearized content is shown to the user and an interface for making manual formatting changes provided.

  13. Reconsidering Print.

    ERIC Educational Resources Information Center

    Development Communication Report, 1978

    1978-01-01

    The role of print in serving the poor majority populations in the developing world is explored through discussions of (1) a rural Ghanian newspaper, the "Densu Times," (2) a popular French language magazine entitled "Famille et Developpement," published in Senegal, West Africa for change agents, (3) a series of cloth posters for classroom use in…

  14. The Technique of Film Editing. Enlarged Edition.

    ERIC Educational Resources Information Center

    Reisz, Karel; Millar, Gavin

    Film editing is discussed from the point of view, not only of the person in the cutting room, but also of the person who has responsibility for the final film. Part I outlines the history of editing from the silent film to 1953. It discusses the practice of editing for action, dialogue, comedy, and montage sequences, as well as in documentaries,…

  15. Basic Wiring. Third Edition. Teacher Edition [and] Student Edition.

    ERIC Educational Resources Information Center

    Kaltwasser, Stan; Flowers, Gary; Blasingame, Don; Batson, Larry; Ipock, Dan; Carroll, Charles; Friesen, Wade; Fleming, Glenn

    This publication contains both a teacher edition and a student edition of materials for a foundation course in an electrical wiring program. The course introduces basic concepts and skills that are prerequisites to residential wiring and commercial and industrial wiring courses. The contents of the materials are tied to measurable and observable…

  16. Major Appliance Repair. Teacher Edition and Student Edition. Second Edition.

    ERIC Educational Resources Information Center

    Smreker, Gene; Calvert, King

    This second edition contains teacher and student guides for 14 units of instruction in major appliance repair. Each unit in the teacher edition includes some or all of the following basic components: objective sheet, suggested activities, answers to assignment sheets, answers to the written test, written test, a unit evaluation form, teacher…

  17. Diesel Technology: Introduction. Teacher Edition [and] Student Edition. Second Edition.

    ERIC Educational Resources Information Center

    Joerschke, John D.; Eichhorn, Lane

    This complete teacher edition of a diesel technology course consists of introductory pages, teacher pages, and the student edition. The introductory pages provide these tools: training and competency profile; National Automotive Technicians Education Foundation Crosswalk; instructional/task analysis; basic skills icons and classifications; basic…

  18. The levels of edit, second edition

    NASA Technical Reports Server (NTRS)

    Vanburen, R.; Buehler, M. F.

    1980-01-01

    The editorial process is analyzed, and five levels of edit are identified. These levels represent cumulative combinations of nine types of edit: Coordination, Policy, Integrity, Screening, Copy Clarification, Format, Mechanical Style, Language, and Substantive. The levels and types of edit, although developed for specific use with external reports at the Jet Propulsion Laboratory, cover the general range of technical editing, especially as it applies to an in-house technical publications organization. Each type of edit is set forth in terms of groups of actions to be performed by editor. The edit-level concept has enhanced understanding and communication among editors, authors, and publications managers concerning the specific editorial work to be done on each manuscript. It has also proved useful as a management tool for estimating and monitoring cost.

  19. Wikipedia editing dynamics

    NASA Astrophysics Data System (ADS)

    Gandica, Y.; Carvalho, J.; Sampaio dos Aidos, F.

    2015-01-01

    A model for the probabilistic function followed in editing Wikipedia is presented and compared with simulations and real data. It is argued that the probability of editing is proportional to the editor's number of previous edits (preferential attachment), to the editor's fitness, and to an aging factor. Using these simple ingredients, it is possible to reproduce the results obtained for Wikipedia editing dynamics for a collection of single pages as well as the averaged results. Using a stochastic process framework, a recursive equation was obtained for the average of the number of edits per editor that seems to describe the editing behavior in Wikipedia.

  20. Wikipedia editing dynamics.

    PubMed

    Gandica, Y; Carvalho, J; Sampaio Dos Aidos, F

    2015-01-01

    A model for the probabilistic function followed in editing Wikipedia is presented and compared with simulations and real data. It is argued that the probability of editing is proportional to the editor's number of previous edits (preferential attachment), to the editor's fitness, and to an aging factor. Using these simple ingredients, it is possible to reproduce the results obtained for Wikipedia editing dynamics for a collection of single pages as well as the averaged results. Using a stochastic process framework, a recursive equation was obtained for the average of the number of edits per editor that seems to describe the editing behavior in Wikipedia. PMID:25679673

  1. The 5th edition of the Roma-BZCAT. A short presentation

    NASA Astrophysics Data System (ADS)

    Massaro, E.; Maselli, A.; Leto, C.; Marchegiani, P.; Perri, M.; Giommi, P.; Piranomonte, S.

    2015-05-01

    The 5th edition of the Roma-BZCAT Multifrequency Catalogue of Blazars is available in a printed version and online at the ASDC website (http://www.asdc.asi.it/bzcat); it is also in the NED database. It presents several relevant changes with respect to the past editions which are briefly described in this paper.

  2. Program Aids In Printing FORTRAN-Coded Output

    NASA Technical Reports Server (NTRS)

    Akian, Richard A.

    1993-01-01

    FORPRINT computer program prints FORTRAN-coded output files on most non-Postscript printers with such extra features as control of fonts for Epson and Hewlett Packard printers. Rewrites data to printer and inserts correct printer-control codes. Alternative uses include ability to separate data or ASCII file during printing by use of editing software to insert "1" in first column of data line that starts new page. Written in FORTRAN 77.

  3. Microcontact printing.

    PubMed

    Xie, Yunyan; Jiang, Xingyu

    2011-01-01

    Microcontact printing (μCP) is a useful technique for transferring certain molecules onto surfaces with high spatial resolution using elastomeric stamps. The stamp for μCP is fabricated by replica molding from a master made by microlithography. After wetting with a type of material as an "ink," the stamp comes into contact with the substrate. The ink is selectively transferred onto parts of the substrate wherever the stamp makes direct contact, to generate patterns and structures with designated features. Self-assembled monolayers (SAMs) and μCP are useful in many different fields, e.g., in the studies of protein adsorption, cell attachment, and in the construction of sensors. PMID:20967634

  4. Introduction to United States Government Information Sources. Sixth Edition. Library and Information Science Text Series.

    ERIC Educational Resources Information Center

    Morehead, Joe

    This book provides an account of the general and specialized sources, in print and non-print formats, that make up the bibliographic and textual structure of federal government information. This edition has been revised to reflect the many changes that have occurred in the production and dissemination of government products within the last five…

  5. A Computerized Adaptive Edition of the Differential Aptitude Tests.

    ERIC Educational Resources Information Center

    McBride, James R.

    An overview of the development of a computerized version of the Differential Aptitude Tests (DAT) is presented. It describes the previously existing printed version of the DAT, design of the computerized adaptive edition, calibration of the test items for use in the computerized version, and two field studies that compared the Adaptive and…

  6. Reading Comprehension: Strategies for Independent Learners. Second Edition

    ERIC Educational Resources Information Center

    Blachowicz, Camille; Ogle, Donna

    2008-01-01

    The authors offer specific classroom practices that help K-9 students compare and evaluate print and online sources, develop vocabulary, build study and test-taking skills, and become motivated readers. The second edition reflects new research on informational literacy and academic and content-specific vocabulary development, and also discusses…

  7. Assistive Potencies: Reconfiguring the Scholarly Edition in an Electronic Setting

    ERIC Educational Resources Information Center

    Lyman, Eugene William

    2009-01-01

    This dissertation makes the claim that electronic scholarly editions have the potential to produce more reliable scholarly texts than their print-based antecedents. It consists of an introduction, four chapters, and a brief conclusion. It originated in my work creating the Elwood Viewer, a sophisticated software browser written to display TEI…

  8. Effective Publications for Colleges and Universities. Revised Edition.

    ERIC Educational Resources Information Center

    Arden, Kelvin J.; Whalen, William J.

    This guide is intended as an aid in producing effective institutional publications. It addresses: communicating through publications; organizing the publications office; editing and writing techniques; buying printing; the catalog; recruiting and career materials; publications; organizing the annual report; faculty, student, and other handbooks;…

  9. Miniature Environments, An Environmental Education Guidebook. Revised Edition.

    ERIC Educational Resources Information Center

    Bureau of Outdoor Recreation (Dept. of Interior), Washington, DC.

    The purpose of this booklet is to bring into the classroom the ecological processes and principles that underlie nature. Students get the opportunity to work with natural objects and to learn about the principles that regulate them. In this revised edition, a number of publications have been compiled and printed under one title. The booklet is…

  10. Unit: Males and Females, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of an Australian Science Education Project unit entitled Males and Females. Materials provided consist of a teacher's edition of the written materials, a student record book, and seven large black and white photographs showing various stages in the dissection of a pregnant rat. This unit has been written to help…

  11. Catalog of Infrared Observations, Third Edition

    NASA Technical Reports Server (NTRS)

    Gezari, Daniel Y.; Schmitz, Marion; Pitts, Patricia S.; Mead, Jaylee M.

    1993-01-01

    The Far Infrared Supplement contains a subset of the data in the full Catalog of Infrared Observations (all observations at wavelengths greater than 4.6 microns). The Catalog of Infrared Observations (CIO), NASA RP-1294, is a compilation of infrared astronomical observational data obtained from an extensive literature search of scientific journals and major astronomical catalogs and surveys. The literature search is complete for years 1965 through 1990 in this Third Edition. The Catalog contains about 210,000 observations of roughly 20,000 individual sources and supporting appendices. The expanded Third Edition contains coded IRAS 4-band data for all CIO sources detected by IRAS. The appendices include an atlas of infrared source positions (also included in this volume), two bibliographies of Catalog listings, and an atlas of infrared spectral ranges. The complete CIO database is available to qualified users in printed, microfiche, and magnetic-tape formats.

  12. Commercial printing and electronic color printing

    NASA Astrophysics Data System (ADS)

    Webb, Joseph W.

    1995-04-01

    Technologies such as Xeikon, Indigo, and the Heidelberg/Presstek GTO-DI can change both the way print buyers may purchase printed material and the way printers and trade services respond to changing demands. Our recent study surveys the graphic arts industry for their current views of these new products and provides forecasts of installations and usage with breakdowns by market segment and size of firm. The acceptance of desktop publishing and electronic prepress have not only paved the way for a totally electronic printing process, but it has broadened the base of people who develop color originals for reproduction. Electronic printing adds the ability to customize jobs on the fly. How print providers will respond to the impact of electronic color printing depends on how each firm perceives the 'threat.' Most printing companies are run by entrepreneurial individuals who have, as their highest priority, their own economic survival. Service bureaus are already looking at electronic color printing as yet another way to differentiate their businesses. The study was based on a mail survey with 682 responses from graphic arts firms, interviews with printers, suppliers, associations and industry executives, and detailed secondary research. Results of a new survey in progress in January 1995 is also presented.

  13. Explanatory Supplement to the Astronomical Almanac, Third Edition

    NASA Astrophysics Data System (ADS)

    Seidelmann, P. Kenneth; Urban, S. E.

    2010-01-01

    "The Explanatory Supplement to the Astronomical Almanac" (hereafter "The Explanatory Supplement") is a comprehensive reference book on the topic of positional astronomy, covering the theories and algorithms used to produce "The Astronomical Almanac" (AsA), an annual publication produced jointly by the Nautical Almanac Office of the US Naval Observatory (USNO) and Her Majesty's Nautical Almanac Office (HMNAO) of the UK Hydrographic Office. The first edition of The Explanatory Supplement appeared in 1961 and was reprinted with amendments during the 1970s. The second edition was printed in 1992 and reprinted until 2006. Since the second edition, several changes have taken place in positional astronomy regarding reference systems and internationally accepted models, data sets, and computational methods; these have been incorporated into the AsA. Additionally, the data presented in the AsA have been modified over the years, with new tables being added and some being discontinued. Given these changes, a new edition of The Explanatory Supplement is appropriate. The third edition has been in development for the last few years and will be available in 2010. The book is organized similarly to the second (1991) edition, with each chapter written by subject matter experts. Authors from USNO and HMNAO contributed to the majority of the book, but there are authors from Jet Propulsion Laboratory, Technical University of Dresden, National Geospatial-Intelligence Agency, University of Texas Austin, and University of Virginia. This paper will discuss this latest edition of the Explanatory Supplement.

  14. Developing new levels of edit

    SciTech Connect

    Prono, J.; DeLanoy, M.; Deupree, R.; Skiby, J.; Thompson, B.

    1998-07-01

    In 1985, the writing and editing group at Los Alamos National Laboratory established four levels of edit for technical reports. When a survey in 1994 showed that both authors and editors felt the levels were not meeting author needs, the authors set about revising them. Their goals were to simplify the editing process, focus editing on improving technical clarity, and ensure that value was added in editing. This paper describes the revision process and product -- three author-based levels of edit.

  15. High Relief Block Printing.

    ERIC Educational Resources Information Center

    Foster, Michael

    1989-01-01

    Explains a method of block printing using styrofoam shapes to make high relief. Describes the creation of the block design as well as the actual printing process. Uses a range of paper types for printing so children can see the results of using different media. (LS)

  16. Large Print Bibliography, 1990.

    ERIC Educational Resources Information Center

    South Dakota State Library, Pierre.

    This bibliography lists materials that are available in large print format from the South Dakota State Library. The annotated entries are printed in large print and include the title of the material and its author, call number, publication date, and type of story or subject area covered. Some recorded items are included in the list. The entries…

  17. Digital Video Editing

    ERIC Educational Resources Information Center

    McConnell, Terry

    2004-01-01

    Monica Adams, head librarian at Robinson Secondary in Fairfax country, Virginia, states that librarians should have the technical knowledge to support projects related to digital video editing. The process of digital video editing and the cables, storage issues and the computer system with software is described.

  18. Editing Newton in Geneva and Rome: The Annotated Edition of the Principia by Calandrini, Le Seur and Jacquier.

    PubMed

    Guicciardini, Niccolò

    2015-07-01

    This contribution examines the circumstances of composition of the annotated edition of Newton's Principia that was printed in Geneva in 1739-1742, which ran to several editions and was still in print in Britain in the mid-nineteenth century. This edition was the work of the Genevan Professor of Mathematics, Jean Louis Calandrini, and of two Minim friars based in Rome, Thomas Le Seur and François Jacquier. The study of the context in which this edition was conceived sheds light on the early reception of Newtonianism in Geneva and Rome. By taking into consideration the careers of Calandrini, Le Seur and Jacquier, as authors, lecturers and leading characters of Genevan and Roman cultural life, I will show that their involvement in the enterprise of annotating Newton's Principia answered specific needs of Genevan and Roman culture. The publication and reception of the Genevan annotated edition has also a broader European dimension. Both Calandrini and Jacquier were in touch with the French république des lettres, most notably with Clairaut and Du Châtelet, and with the Bernoulli family in Basel. Therefore, this study is also relevant for the understanding of the dissemination of Newton's ideas in Europe. PMID:26104303

  19. Compact organic vapor jet printing print head

    DOEpatents

    Forrest, Stephen R; McGraw, Gregory

    2013-12-24

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print header further includes a first layer comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  20. Compact organic vapor jet printing print head

    DOEpatents

    Forrest, Stephen; McGraw, Gregory

    2016-02-02

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print head further includes a first layer further comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  1. Compact organic vapor jet printing print head

    SciTech Connect

    Forrest, Stepehen R; McGraw, Gregory

    2015-01-27

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print head further includes a first layer further comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  2. Characterization of relief printing

    NASA Astrophysics Data System (ADS)

    Liu, Xing; Chen, Lin; Ortiz-Segovia, Maria-Valezzka; Ferwerda, James; Allebach, Jan

    2014-03-01

    Relief printing technology developed by Océ allows the superposition of several layers of colorant on different types of media which creates a variation of the surface height defined by the input to the printer. Evaluating the reproduction accuracy of distinct surface characteristics is of great importance to the application of the relief printing system. Therefore, it is necessary to develop quality metrics to evaluate the relief process. In this paper, we focus on the third dimension of relief printing, i.e. height information. To achieve this goal, we define metrics and develop models that aim to evaluate relief prints in two aspects: overall fidelity and surface finish. To characterize the overall fidelity, three metrics are calculated: Modulation Transfer Function (MTF), difference and root-mean-squared error (RMSE) between the input height map and scanned height map, and print surface angle accuracy. For the surface finish property, we measure the surface roughness, generate surface normal maps and develop a light reflection model that serves as a simulation of the differences between ideal prints and real prints that may be perceived by human observers. Three sets of test targets are designed and printed by the Océ relief printer prototypes for the calculation of the above metrics: (i) twisted target, (ii) sinusoidal wave target, and (iii) ramp target. The results provide quantitative evaluations of the printing quality in the third dimension, and demonstrate that the height of relief prints is reproduced accurately with respect to the input design. The factors that affect the printing quality include: printing direction, frequency and amplitude of the input signal, shape of relief prints. Besides the above factors, there are two additional aspects that influence the viewing experience of relief prints: lighting condition and viewing angle.

  3. CRISPR Genome Editing

    Cancer.gov

    A research article about a technique for gene editing known as CRISPR-Cas9. The technique has made it much easier and faster for cancer researchers to study mutations and test new therapeutic targets.

  4. Developing new levels of edit

    SciTech Connect

    Prono, J.K.

    1997-06-01

    Since 1985, Los Alamos National Laboratory (LANL) staff have had four levels of edit to choose from for technical reports. When a CQI survey showed that both authors and editors felt the levels were not meeting author needs, LANL set about revising them. The goals were to simplify the editing process, focus editing on improving technical clarity, and ensure value added in editing. This paper describes the revision process and product--three author-based levels of edit.

  5. Printed circuit board industry.

    PubMed

    LaDou, Joseph

    2006-05-01

    The printed circuit board is the platform upon which microelectronic components such as semiconductor chips and capacitors are mounted. It provides the electrical interconnections between components and is found in virtually all electronics products. Once considered low technology, the printed circuit board is evolving into a high-technology product. Printed circuit board manufacturing is highly complicated, requiring large equipment investments and over 50 process steps. Many of the high-speed, miniaturized printed circuit boards are now manufactured in cleanrooms with the same health and safety problems posed by other microelectronics manufacturing. Asia produces three-fourths of the world's printed circuit boards. In Asian countries, glycol ethers are the major solvents used in the printed circuit board industry. Large quantities of hazardous chemicals such as formaldehyde, dimethylformamide, and lead are used by the printed circuit board industry. For decades, chemically intensive and often sloppy manufacturing processes exposed tens of thousands of workers to a large number of chemicals that are now known to be reproductive toxicants and carcinogens. The printed circuit board industry has exposed workers to high doses of toxic metals, solvents, acids, and photolithographic chemicals. Only recently has there been any serious effort to diminish the quantity of lead distributed worldwide by the printed circuit board industry. Billions of electronics products have been discarded in every region of the world. This paper summarizes recent regulatory and enforcement efforts. PMID:16580876

  6. Engraving Print Classification

    SciTech Connect

    Hoelck, Daniel; Barbe, Joaquim

    2008-04-15

    A print is a mark, or drawing, made in or upon a plate, stone, woodblock or other material which is cover with ink and then is press usually into a paper reproducing the image on the paper. Engraving prints usually are image composed of a group of binary lines, specially those are made with relief and intaglio techniques. Varying the number and the orientation of lines, the drawing of the engraving print is conformed. For this reason we propose an application based on image processing methods to classify engraving prints.

  7. The Official Records of the American Civil War: A Researcher's Guide. 2nd Edition.

    ERIC Educational Resources Information Center

    Aimone, Alan Conrad

    Official reports and correspondence of the American Civil War were printed by the United States Government Printing Office as the "Official Records, Army" (O.R.) in 129 volumes and the "Official Records, Navy" (N.O.R.) in 31 volumes. This corrected and expanded edition of the guide provides a brief historical sketch of the O.R. and N.O.R. and…

  8. The Circle Block Print

    ERIC Educational Resources Information Center

    Shaw, Annita

    2011-01-01

    Most students enjoy the printing process. Some may have experimented with printing in the past using found objects or cutouts made of cardboard. In this article, students create a design on a pie-shaped piece and then repeat it to make a radial design.

  9. Printing Ancient Terracotta Warriors

    ERIC Educational Resources Information Center

    Gadecki, Victoria L.

    2010-01-01

    Standing in awe in Xian, China, at the Terra Cotta warrior archaeological site, the author thought of sharing this experience and excitement with her sixth-grade students. She decided to let her students carve patterns of the ancient soldiers to understand their place in Chinese history. They would make block prints and print multiple soldiers on…

  10. Construction Print Reading.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on construction print reading is designed to provide Marines of all ranks and Military Occupation Specialities with the basic information to recognize the terms and symbols used in construction prints; it is adaptable for nonmilitary instruction.…

  11. [Printed material distributed by pharmaceutical propaganda agents].

    PubMed

    Mejía, R; Avalos, A

    2001-01-01

    Pharmaceutical sales representatives (drug reps) frequently visit 70% to 90% of physicians during their daily clinical practice and many consider the promotional printed material to be a major source of clinical information. We evaluated samples of the promotional printed material distributed to physicians by drug reps in order to determine whether the data contained in the promotional material is correct and supported by references accessible in Argentina. A consecutive sample of all the promotional material distributed by drug reps in the general internal medicine program (Hospital de Clínicas) was collected between March 15 and April 15, 2000. Reprints and monographs were excluded. Clinical information was reviewed by two general internists and compared to information in a major pharmacology textbook and in an electronic medical information program. References cited were reviewed for correct listing and accessibility in any of the four major medical libraries in Buenos Aires. Of the sixty-four pieces of promotional material collected, thirty were randomly selected and evaluated. In twenty one (70%) the therapeutic effect promoted in advertisement appeared in Goodman & Gilman's 9th edition textbook of pharmacology, in the pharmacology section of the Up-to-Date version 8.1 or in both. Only eighteen (60%) of the thirty promotional printed material evaluated had statements supported by cited references. From a total of 131 references cited in promotional materials, sixty (46%) were incorrectly listed according to the International Committee of Medical Journal Editors. These references were inaccessible. Of the 71 references correctly cited, 49 (69%) were not available in any of the four major medical libraries in Buenos Aires and 8 were available in only two of the libraries. Twenty-two references were reviewed, and in twelve of these (54%), the objective of the research study concurred with the statement of the promotional printed material. Adverse reactions

  12. Editing graphs for maximum effect

    SciTech Connect

    Murphy, P.W.; Rhiner, R.W.

    1991-01-08

    The paper contains over eighty rules for editing graphs, arranged under nine major headings in a logical sequence for editing all the graphs in a manuscript. It is excerpted from a monograph used at the Lawrence Livermore National Laboratory to train beginning technical editors in editing graphs; a corresponding Hypercard stack is also used in this training. 6 refs., 4 figs.

  13. When Reference Works Are Not Books. The New Edition of the "Guide to Reference Books."

    ERIC Educational Resources Information Center

    Kieft, Robert H.

    2002-01-01

    Discusses the history of the "Guide to Reference Books" and reviews considerations that have informed planning for the new edition planned for 2004 which will be called "Guide to Reference Sources" to reflect the change from print format to a Web-based online product. (LRW)

  14. Edward Ardizzone Revisited: Lucy Brown and the Moral Editing of Art.

    ERIC Educational Resources Information Center

    Martin, Rebecca

    2000-01-01

    Suggests implications of the story line of "Lucy Brown and Mr. Grimes" provoked controversy among American librarians in the 1930s, leading to its 33-year out-of-print status. Compares the two editions of these issues. Considers a definition of a quality picture book and if they are for children only. Considers if revisions meant to modernize a…

  15. Reference Encyclopedia of the American Indian. Volume 1, 4th Edition.

    ERIC Educational Resources Information Center

    Klein, Barry T., Ed.

    Volume 1 of the fourth edition of the encyclopedia contains directory and descriptive listings of organizations in the United States and Canada, resource materials concerning North American Indians, and a bibliography of in-print books about the American Indian. The first section of the volume contains source listings of government agencies,…

  16. MENTAL DEFICIENCY. SECOND EDITION.

    ERIC Educational Resources Information Center

    HILLIARD, L.T.; KIRMAN, BRIAN H.

    REVISED TO INCLUDE LEGISLATIVE AND ADMINISTRATIVE PROCEDURES NEW IN BRITAIN SINCE THE 1957 EDITION, THE TEXT INCLUDES RECENT ADVANCES IN ETIOLOGY, PATHOLOGY, AND TREATMENT OF MENTAL DEFICIENCY. CONSIDERATION OF THE BACKGROUND OF MENTAL DEFICIENCY INCLUDES HISTORICAL AND LEGAL ASPECTS, THE SOCIAL BACKGROUND OF MENTAL DEFECT, PRENATAL CAUSES OF…

  17. Behaviour Recovery. Second Edition

    ERIC Educational Resources Information Center

    Rogers, Bill

    2004-01-01

    This second edition of Behaviour Recovery puts emphasis on teaching behaviour concerning children with emotional and behavioural disorders (EBD). These children have many factors in their lives that affect their behaviour over which schools have limited control. This book acknowledges the challenge and explores the practical realities, options and…

  18. Beginning to edit physics

    SciTech Connect

    Murphy, P.W.

    1995-02-01

    A physicist-turned-editor shows you the basics required for copyediting physics papers (physical quantities, symbols, units, scientific notation, the structure of mathematical expressions, the nature of graphs), and points the way to learning enough ``editorial physics`` to begin substantive editing.

  19. Contaminant hydrogeology. 2. edition

    SciTech Connect

    Fetter, C.W.

    1999-08-01

    This book is a major revision of the 1993 edition and includes the important practical concepts that have since emerged. Contents include: mass transport in saturated media; transformation, retardation, and attenuation of solutes; flow and mass transport in the vadose zone; multiphase flow; inorganic chemicals in groundwater; organic compounds in groundwater; groundwater and soil monitoring; and site remediation.

  20. Editing Technical Writing.

    ERIC Educational Resources Information Center

    Samson, Donald C., Jr.

    Intended for students in upper-division technical communication courses and professionals in business and government who want to learn how to edit technical writing, this book describes what technical editors do and how they do it. Throughout the book are exercises that students can use as self-tests; answer keys are provided for checking work.…

  1. Stop, Look, Listen, Print

    ERIC Educational Resources Information Center

    Schwing, Pauline E.

    1972-01-01

    Article describes the use of audiovisual aids in teaching third-graders how to make brayer, string, Styrofoam and gadget prints. Author advises close cooperation between art and classroom teachers. Printmaking as a means of communication is touched upon. (PD)

  2. Spanish-Language Health Communication Teaching Aids. A List of Printed Materials and Their Sources.

    ERIC Educational Resources Information Center

    Isquith, Robert N., Comp.; Webb, Charles T., Comp.

    Over 450 Spanish printed materials about the various aspects of health and their sources are listed in this publication. Italics are used to indicate either the translation of Spanish titles or the titles of English-language editions. Publications with bilingual texts are shown by hyphenated titles. Information about the distribution of materials…

  3. "Soft Copy" and the Illusion of Laser-Printed Text (A Teaching Tip).

    ERIC Educational Resources Information Center

    Taylor, Todd

    1995-01-01

    Provides ways to use the standard functions of word processors to help students effectively edit on-screen "soft copy" as well as ways to counter the illusion of perfection caused by drafts printed on high-resolution laser printers with proportional fonts. (RS)

  4. 32 CFR Appendix D to Part 247 - AFIS Print Media Directorate

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... annual almanac edition highlights DoD's organization and statistical information. 3. Defense Billboard, a... magazines. 2. Headquarters of the DoD Components and their subordinate commands. 3. Proponent offices of DoD... 32 National Defense 2 2013-07-01 2013-07-01 false AFIS Print Media Directorate D Appendix D...

  5. 32 CFR Appendix D to Part 247 - AFIS Print Media Directorate

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... annual almanac edition highlights DoD's organization and statistical information. 3. Defense Billboard, a... magazines. 2. Headquarters of the DoD Components and their subordinate commands. 3. Proponent offices of DoD... 32 National Defense 2 2012-07-01 2012-07-01 false AFIS Print Media Directorate D Appendix D...

  6. 32 CFR Appendix D to Part 247 - AFIS Print Media Directorate

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... annual almanac edition highlights DoD's organization and statistical information. 3. Defense Billboard, a... magazines. 2. Headquarters of the DoD Components and their subordinate commands. 3. Proponent offices of DoD... 32 National Defense 2 2014-07-01 2014-07-01 false AFIS Print Media Directorate D Appendix D...

  7. A Comparison of Guides to Non-Print Media. Updated 1975.

    ERIC Educational Resources Information Center

    Rawnsley, David E., Comp.

    An update of the 1973 Comparison of Guides to Non-Print Media, which lists guides and indexes to nonprint instructional media, has been compiled. The 1975 edition is cumulative, with 17 new indexes and guides included, and out-of-date indexes and guides excluded. Five comprehensive guides covering a number of content areas have been added, 2 have…

  8. Video Editing System

    NASA Technical Reports Server (NTRS)

    Schlecht, Leslie E.; Kutler, Paul (Technical Monitor)

    1998-01-01

    This is a proposal for a general use system based, on the SGI IRIS workstation platform, for recording computer animation to videotape. In addition, this system would provide features for simple editing and enhancement. Described here are a list of requirements for the system, and a proposed configuration including the SGI VideoLab Integrator, VideoMedia VLAN animation controller and the Pioneer rewritable laserdisc recorder.

  9. BOK-Printed Electronics

    NASA Technical Reports Server (NTRS)

    Ghaffarian, Reza

    2013-01-01

    The use of printed electronics technologies (PETs), 2D or 3D printing approaches either by conventional electronic fabrication or by rapid graphic printing of organic or nonorganic electronic devices on various small or large rigid or flexible substrates, is projected to grow exponentially in commercial industry. This has provided an opportunity to determine whether or not PETs could be applicable for low volume and high-reliability applications. This report presents a summary of literature surveyed and provides a body of knowledge (BOK) gathered on the current status of organic and printed electronics technologies. It reviews three key industry roadmaps- on this subject-OE-A, ITRS, and iNEMI-each with a different name identification for this emerging technology. This followed by a brief review of the status of the industry on standard development for this technology, including IEEE and IPC specifications. The report concludes with key technologies and applications and provides a technology hierarchy similar to those of conventional microelectronics for electronics packaging. Understanding key technology roadmaps, parameters, and applications is important when judicially selecting and narrowing the follow-up of new and emerging applicable technologies for evaluation, as well as the low risk insertion of organic, large area, and printed electronics.

  10. Printed hybrid systems

    NASA Astrophysics Data System (ADS)

    Karioja, Pentti; Mäkinen, Jukka-Tapani; Keränen, Kimmo; Aikio, Janne; Alajoki, Teemu; Jaakola, Tuomo; Koponen, Matti; Keränen, Antti; Heikkinen, Mikko; Tuomikoski, Markus; Suhonen, Riikka; Hakalahti, Leena; Kopola, Pälvi; Hast, Jukka; Liedert, Ralf; Hiltunen, Jussi; Masuda, Noriyuki; Kemppainen, Antti; Rönkä, Kari; Korhonen, Raimo

    2012-04-01

    This paper presents research activities carried out at VTT Technical Research Centre of Finland in the field of hybrid integration of optics, electronics and mechanics. Main focus area in our research is the manufacturing of electronic modules and product structures with printed electronics, film-over-molding and polymer sheet lamination technologies and the goal is in the next generation of smart systems utilizing monolithic polymer packages. The combination of manufacturing technologies such as roll-to-roll -printing, injection molding and traditional component assembly is called Printed Hybrid Systems (PHS). Several demonstrator structures have been made, which show the potential of polymer packaging technology. One demonstrator example is a laminated structure with embedded LED chips. Element thickness is only 0.3mm and the flexible stack of foils can be bent in two directions after assembly process and was shaped curved using heat and pressure. The combination of printed flexible circuit boards and injection molding has also been demonstrated with several functional modules. The demonstrators illustrate the potential of origami electronics, which can be cut and folded to 3D shapes. It shows that several manufacturing process steps can be eliminated by Printed Hybrid Systems technology. The main benefits of this combination are small size, ruggedness and conformality. The devices are ideally suited for medical applications as the sensitive electronic components are well protected inside the plastic and the structures can be cleaned easily due to the fact that they have no joints or seams that can accumulate dirt or bacteria.

  11. CAD-CAM printed circuit board design

    NASA Astrophysics Data System (ADS)

    Agy, W. E.

    A step-by-step procedure for a printed circuit design achieved by CAD is presented. The operator at the interactive CRT station moves a stylus across a graphics tablet and intersperses commands which result in computer-generated pictorial forms on the screen that were drawn on the pad. Standard symbols are used for commands allowing, for instance, connections to be made of specific types in certain locations, which can be automatically edited from a materials list. An entire network of drawn lines can be referenced by a signal name for recall, and a finished circuit schematic can be checked for designs rules compliance, including fault reporting in terms of designator/pin number. A map may be present delineating the boundaries of the circuitry area, and previously completed circuitry segments can be recalled for piece-by-piece assembly of the circuit board.

  12. PROGRAMMES IN PRINT 1966.

    ERIC Educational Resources Information Center

    CAVANAGH, PETER, COMP., ED.; JONES, CLIVE, COMP., ED.

    APPROXIMATELY 1200 PROGRAMS ARE LISTED WITH TITLE, AUTHOR, DATE OF PUBLICATION, PUBLISHER, PRICE, COUNTRY OF ORIGIN, DATE OF LATEST EDITION IF REVISED, MONTHLY RENTAL PRICE, TYPE OF PROGRAM, NUMBER OF FRAMES, NUMBER OF PAGES IF A BOOK PROGRAM, TARGET POPULATION, STUDY TIME, AVAILABILITY FOR MACHINE USE, AND SUPPLEMENTARY MATERIALS WITH THEIR…

  13. MANCHESTER MILLS, PRINT WORKS: BLUE DYE AND SOAPING; PRINTING AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MANCHESTER MILLS, PRINT WORKS: BLUE DYE AND SOAPING; PRINTING AND BLEACHING BUILDINGS. PHOTOCOPY OF c. 1905 VIEW LOOKING NORTHEAST. From the collection of Mr. George Durette, Photographer, Manchester, N. H. - Amoskeag Millyard, Canal Street, Manchester, Hillsborough County, NH

  14. Inkjet printing of graphene.

    PubMed

    Arapov, Kirill; Abbel, Robert; de With, Gijsbertus; Friedrich, Heiner

    2014-01-01

    The inkjet printing of graphene is a cost-effective, and versatile deposition technique for both transparent and non-transparent conductive films. Printing graphene on paper is aimed at low-end, high-volume applications, i.e., in electromagnetic shielding, photovoltaics or, e.g., as a replacement for the metal in antennas of radio-frequency identification devices, thereby improving their recyclability and biocompatibility. Here, we present a comparison of two graphene inks, one prepared by the solubilization of expanded graphite in the presence of a surface active polymer, and the other by covalent graphene functionalization followed by redispersion in a solvent but without a surfactant. The non-oxidative functionalization of graphite in the form of a donor-type graphite intercalation compound was carried out by a Birch-type alkylation, where graphene can be viewed as a macrocarbanion. To increase the amount of functionalization we employed a graphite precursor with a high edge to bulk carbon ratio, thus, allowing us to achieve up to six weight percent of functional groups. The functionalized graphene can be readily dispersed at concentrations of up to 3 mg ml(-1) in non-toxic organic solvents, and is colloidally stable for more than 2 months. The two inks are readily inkjet printable with good to satisfactory spreading. Analysis of the sheet resistance of the deposited films demonstrated that the inks based on expanded graphite outperform the functionalized graphene inks, possibly due to the significantly larger graphene sheet size in the former, which minimizes the number of sheet-to-sheet contacts along the conductive path. We found that the sheet resistance of printed large-area films decreased with an increase of the number of printed layers. Conductivity levels reached approximately 1-2 kΩ □(-1) for 15 printing passes, which roughly equals a film thickness of 800 nm for expanded graphite based inks, and 2 MΩ □(-1) for 15 printing passes of

  15. REDIdb: the RNA editing database

    PubMed Central

    Picardi, Ernesto; Regina, Teresa Maria Rosaria; Brennicke, Axel; Quagliariello, Carla

    2007-01-01

    The RNA Editing Database (REDIdb) is an interactive, web-based database created and designed with the aim to allocate RNA editing events such as substitutions, insertions and deletions occurring in a wide range of organisms. The database contains both fully and partially sequenced DNA molecules for which editing information is available either by experimental inspection (in vitro) or by computational detection (in silico). Each record of REDIdb is organized in a specific flat-file containing a description of the main characteristics of the entry, a feature table with the editing events and related details and a sequence zone with both the genomic sequence and the corresponding edited transcript. REDIdb is a relational database in which the browsing and identification of editing sites has been simplified by means of two facilities to either graphically display genomic or cDNA sequences or to show the corresponding alignment. In both cases, all editing sites are highlighted in colour and their relative positions are detailed by mousing over. New editing positions can be directly submitted to REDIdb after a user-specific registration to obtain authorized secure access. This first version of REDIdb database stores 9964 editing events and can be freely queried at . PMID:17175530

  16. Using Environmental Print to Enhance Emergent Literacy and Print Motivation

    ERIC Educational Resources Information Center

    Neumann, Michelle M.; Hood, Michelle; Ford, Ruth M.

    2013-01-01

    Given the ubiquitous and salient nature of environmental print, it has the potential to scaffold emergent literacy in young children. This randomised control study evaluated the effects of using environmental print compared to standard print (the same labels in manuscript form) in an 8-week intervention (30 min per week) to foster 3- to…

  17. NASA Thesaurus Supplement: A Three-Part Cumulative Update of the 1998 Edition of the NASA Thesaurus. Supplement 7

    NASA Technical Reports Server (NTRS)

    2001-01-01

    The NASA Thesaurus Supplement is a cumulative update to the 1998 edition of the NASA Thesaurus (NASA/SP-1998-7501). The Supplement, published every six months, includes all new terms and associated hierarchies added since the cutoff for the 1998 edition (December 1997). Parts 1 and 2 (Hierarchical Listing and Rotated Term Display) correspond to Volumes 1 and 2 of the 1998 printed edition of the NASA Thesaurus. Definitions are included in Part 1; uppercase/lowercase forms are provided in both Parts 1 and 2. Part 3 is a list of deletions or changes to valid terms.

  18. NASA Thesaurus Supplement: A Three-Part Cumulative Update of the 1998 Edition of the NASA Thesaurus. Supplement 5

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The NASA Thesaurus Supplement is a cumulative update to the 1998 edition of the NASA Thesaurus (NASA/SP-1998-7501). The Supplement, published every 6 months, includes all new terms and associated hierarchies added since the cutoff for the 1998 edition (December 1997). Parts 1 and 2 (Hierarchical Listing and Rotated Term Display) correspond to Volumes 1 and 2 of the 1998 printed edition of the NASA Thesaurus. Definitions are included in Part 1; uppercase/lowercase forms are provided in both Parts 1 and 2. Part 3 is a list of deletions or changes to valid terms.

  19. NASA Thesaurus Supplement: A Three-Part Cumulative Update of the 1998 Edition of the NASA Thesaurus

    NASA Technical Reports Server (NTRS)

    2001-01-01

    The NASA Thesaurus Supplement is a cumulative update to the 1998 edition of the NASA Thesaurus (NASA/SP-1998-7501). The Supplement, published every six months, includes all new terms and associated hierarchies added since the cutoff for the 1998 edition (December 1997). Parts 1 and 2 (Hierarchical Listing and Rotated Term Display) correspond to Volumes 1 and 2 of the 1998 printed edition of the NASA Thesaurus. Definitions are included in Part 1; uppercase/lowercase forms are provided in both Parts 1 and 2. Part 3 is a list of deletions or changes to valid terms.

  20. NASA Thesaurus Supplement: A Three-Part Cumulative Update of the 1998 Edition of the NASA Thesaurus. Supplement 4

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The NASA Thesaurus Supplement is a cumulative update to the 1998 edition of the NASA Thesaurus (NASA/SP-1998-7501). The Supplement, published every six months, includes all new terms and associated hierarchies added since the cutoff for the 1998 edition (December 1997). Parts 1 and 2 (Hierarchical Listing and Rotated Term Display) correspond to Volumes 1 and 2 of the 1998 printed edition. Definitions are included in Part 1; uppercase/lowercase forms are provided in both Parts 1 and 2. Part 3 is a list of deletions or changes to valid terms.

  1. For the Classroom: Print Shop.

    ERIC Educational Resources Information Center

    Current, 1984

    1984-01-01

    Presents an activity for students (ages 5-6 and 7-14) to identify external characteristics of marine life and plants through printing (using homemade stamp pads). Includes procedures and list of materials, and printing ideas. (JN)

  2. Music Sequencing and Printing Software.

    ERIC Educational Resources Information Center

    Kassner, Kirk

    2000-01-01

    States that sequencing and printing software eliminates the barriers to students composing music. Describes "Master Tracks Pro," a sequencing program, and "Rhapsody," a printing program. Includes a lesson plan for setting pentatonic music to a poem. (CMK)

  3. Editing the Small Magazine. 2nd Edition Revised.

    ERIC Educational Resources Information Center

    Ferguson, Rowena

    Designed for the aspiring journalist and the professional editor, this revised second edition serves as a standard reference work as well as an ideal means of keeping abreast of new trends and developments in the editing of small magazines. It describes the latest technological developments in type-setting and production; discusses and evaluates…

  4. Serendipitous Stencil Prints

    ERIC Educational Resources Information Center

    Tam, Jeff

    2008-01-01

    Printing, stamping, and rubbings are enjoyed by all ages, and the image-making capabilities of this media are endless and very spontaneous. In printmaking, images can be repeated, overlapped, inked in various colors, cut up, reassembled, and manipulated. Students find these methods to be engaging and serendipitous. This lesson, designed for eighth…

  5. Bloomin' Color Celery Prints.

    ERIC Educational Resources Information Center

    Skophammer, Karen

    2002-01-01

    Describes a second and third grade art activity in which students used celery cores to create pictures in the style of Georgia O'Keefe. Explains that the students learned about O'Keefe's artwork and describes how the students created their prints. (CMK)

  6. Print Advertisements in Malaysia

    ERIC Educational Resources Information Center

    Hashim, Azirah

    2010-01-01

    This paper examines print advertisements in Malaysia to determine how advertisers seek to achieve their primary goal of persuading or influencing an audience by the use of both language and visuals. It describes the main component moves and rhetorical strategies used by writers to articulate the communicative purpose of the genre and the language…

  7. Legibility of Print.

    ERIC Educational Resources Information Center

    Bloodsworth, James Gaston

    Legibility refers to the physical appearance of printed materials: line lengths, type size, style of type face, space between lines and between letters, margins, and physical format are some of the factors that are involved. After the turn of the century, especially after 1925, research became fairly common in this area, but has been meager since…

  8. Just press print

    NASA Astrophysics Data System (ADS)

    Ornes, Stephen

    2013-09-01

    Patients requiring an organ transplant may one day no longer have to wait for a matching donor. As Stephen Ornes explains, researchers are making progress towards creating human organs with techniques such as 3D printing, using the patient's own cells for ink.

  9. "Printed-circuit" rectenna

    NASA Technical Reports Server (NTRS)

    Dickinson, R. M.

    1977-01-01

    Rectifying antenna is less bulky structure for absorbing transmitted microwave power and converting it into electrical current. Printed-circuit approach, using microstrip technology and circularly polarized antenna, makes polarization orientation unimportant and allows much smaller arrays for given performance. Innovation is particularly useful with proposed electric vehicles powered by beam microwaves.

  10. Tin Can Textile Printing.

    ERIC Educational Resources Information Center

    Mansfield, Patricia; Sanford, Barbara

    1979-01-01

    Describes the process of "canning"--applying textile pigment or dye to cloth by moving a pigment-filled can across the fabric to create a linear design. This printing process is described as low-cost, easy, and suitable for all age and artistic levels. (Author/SJL)

  11. Printing and the Online Catalog.

    ERIC Educational Resources Information Center

    Price, Bennett J.

    1984-01-01

    Discusses issues involved in offering printing for online library catalogs and weighs advantages and disadvantages of screen printing versus remote printing--speed, quality, privacy, convenience, noise, control, costs, accessibility and service. Additional technical issues discussed are buffered versus unbuffered asynchronous printer ports,…

  12. A laser printing based approach for printed electronics

    NASA Astrophysics Data System (ADS)

    Zhang, T.; Hu, M.; Liu, Y.; Guo, Q.; Wang, X.; Zhang, W.; Lau, W.; Yang, J.

    2016-03-01

    Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

  13. 48 CFR 952.208-70 - Printing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., acquisition, and dissemination of printed matter. Such printing must be obtained from the Government Printing Office (GPO), a contract source designated by GPO or a Joint Committee on Printing authorized federal... subcontract for, any printing (as that term is defined in Title I of the U.S. Government Printing and...

  14. 48 CFR 952.208-70 - Printing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., acquisition, and dissemination of printed matter. Such printing must be obtained from the Government Printing Office (GPO), a contract source designated by GPO or a Joint Committee on Printing authorized federal... subcontract for, any printing (as that term is defined in Title I of the U.S. Government Printing and...

  15. 48 CFR 952.208-70 - Printing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., acquisition, and dissemination of printed matter. Such printing must be obtained from the Government Printing Office (GPO), a contract source designated by GPO or a Joint Committee on Printing authorized federal... subcontract for, any printing (as that term is defined in Title I of the U.S. Government Printing and...

  16. 48 CFR 952.208-70 - Printing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., acquisition, and dissemination of printed matter. Such printing must be obtained from the Government Printing Office (GPO), a contract source designated by GPO or a Joint Committee on Printing authorized federal... subcontract for, any printing (as that term is defined in Title I of the U.S. Government Printing and...

  17. Direct volume editing.

    PubMed

    Bürger, Kai; Krüger, Jens; Westermann, Rüdiger

    2008-01-01

    In this work we present basic methodology for interactive volume editing on GPUs, and we demonstrate the use of these methods to achieve a number of different effects. We present fast techniques to modify the appearance and structure of volumetric scalar fields given on Cartesian grids. Similar to 2D circular brushes as used in surface painting we present 3D spherical brushes for intuitive coloring of particular structures in such fields. This paint metaphor is extended to allow the user to change the data itself, and the use of this functionality for interactive structure isolation, hole filling, and artefact removal is demonstrated. Building on previous work in the field we introduce high-resolution selection volumes, which can be seen as a resolution-based focus+context metaphor. By utilizing such volumes we present a novel approach to interactive volume editing at sub-voxel accuracy. Finally, we introduce a fast technique to paste textures onto iso-surfaces in a 3D scalar field. Since the texture resolution is independent of the volume resolution, this technique allows structure-aligned textures containing appearance properties or textual information to be used for volume augmentation and annotation. PMID:18988988

  18. Natural Hazards, Second Edition

    NASA Astrophysics Data System (ADS)

    Rouhban, Badaoui

    Natural disaster loss is on the rise, and the vulnerability of the human and physical environment to the violent forces of nature is increasing. In many parts of the world, disasters caused by natural hazards such as earthquakes, floods, landslides, drought, wildfires, intense windstorms, tsunami, and volcanic eruptions have caused the loss of human lives, injury, homelessness, and the destruction of economic and social infrastructure. Over the last few years, there has been an increase in the occurrence, severity, and intensity of disasters, culminating with the devastating tsunami of 26 December 2004 in South East Asia.Natural hazards are often unexpected or uncontrollable natural events of varying magnitude. Understanding their mechanisms and assessing their distribution in time and space are necessary for refining risk mitigation measures. This second edition of Natural Hazards, (following a first edition published in 1991 by Cambridge University Press), written by Edward Bryant, associate dean of science at Wollongong University, Australia, grapples with this crucial issue, aspects of hazard prediction, and other issues. The book presents a comprehensive analysis of different categories of hazards of climatic and geological origin.

  19. Children in Sport. Second Edition.

    ERIC Educational Resources Information Center

    Magill, Richard A., Ed.; And Others

    This anthology of papers is designed to serve both as a textbook and as a synthesis of research efforts in youth sport. Half of the 20 papers are reprinted from the first edition of this volume; of the remainder, some were written especially for this edition, while others are culled from journals and conference proceedings. Five subject sections…

  20. Drug Abuse Films, Second Edition.

    ERIC Educational Resources Information Center

    National Coordinating Council on Drug Education, Washington, DC.

    This second edition updates and expands a 1971 evaluation of films and audiovisuals related to drug education performed by the National Coordinating Council on Drug Education. Materials in this edition are evaluated both for accuracy and effectiveness as a communications tool. They are separated into two sections--films and other audiovisuals…

  1. Residential and Light Commercial HVAC. Teacher Edition and Student Edition. Second Edition.

    ERIC Educational Resources Information Center

    Stephenson, David

    This package contains teacher and student editions of a residential and light commercial heating, ventilation, and air conditioning (HVAC) course of study. The teacher edition contains information on the following: using the publication; national competencies; competency profile; related academic and workplace skills list; tools, equipment, and…

  2. Graphic Arts: Process Camera, Stripping, and Platemaking. Fourth Edition. Teacher Edition [and] Student Edition.

    ERIC Educational Resources Information Center

    Multistate Academic and Vocational Curriculum Consortium, Stillwater, OK.

    This publication contains both a teacher edition and a student edition of materials for a course in graphic arts that covers the process camera, stripping, and platemaking. The course introduces basic concepts and skills necessary for entry-level employment in a graphic communication occupation. The contents of the materials are tied to measurable…

  3. Oxyacetylene Welding and Oxyfuel Cutting. Third Edition. Teacher Edition [and] Student Edition [and] Student Workbook.

    ERIC Educational Resources Information Center

    Knapp, John; Harper, Eddie

    This Oklahoma curriculum guide, which includes a teacher edition, a student edition, and a student workbook, provides three units for a course on oxyacetylene welding, oxyfuel cutting, and cutting done with alternative fuels such as MAPP, propane, and natural gas. The three units are: "Oxyacetylene Welding"; "Oxyfuel Cutting"; and "Oxyacetylene…

  4. Fundamentals of Welding. Teacher Edition [and] Student Edition [and] Student Workbook. Second Edition.

    ERIC Educational Resources Information Center

    Fortney, Clarence; Gregory, Mike; New, Larry

    Teacher and student editions and a student workbook for fundamentals of welding comprise the first of six in a series of competency-based instructional materials for welding programs. Introductory pages in the teacher edition are training and competency profile, instructional/task analysis, basic skills icons and classifications, basic skills…

  5. Introduction to Surgical Technology. Third Edition. Teacher Edition [and] Student Edition.

    ERIC Educational Resources Information Center

    Bushey, Vicki; Hildebrand, Bob; Hildebrand, Dinah; Johnson, Dave; Sikes, John; Tahah, Ann; Walker, Susan; Zielsdorf, Lani

    These teacher and student editions provide instructional materials for an introduction to surgical technology course. Introductory materials in the teacher edition include information on use, instructional/task analysis, academic and workplace skill classifications and definitions, related academic and workplace skill list, and crosswalk to…

  6. From Primer to Pleasure in Reading; An Introduction to the History of Children's Books in England from the Invention of Printing to 1914 with an Outline of Some Developments in Other Countries.

    ERIC Educational Resources Information Center

    Thwaite, Mary F.

    This revised edition of "From Primer to Pleasure" examines the history of children's books in England and elsewhere from the invention of printing to 1914. Sections and chapters are divided according to sources (printing, romance and traditional literature, and developments in the sixteenth and seventeenth centuries), foundations (reason versus…

  7. The Elementary School Library Collection: A Guide to Books and Other Media, Phases 1-2-3. 20th Edition.

    ERIC Educational Resources Information Center

    Homa, Linda L., Ed.; And Others

    This collection development aid lists more than 10,000 titles of children's materials available in a variety of formats (in addition to print materials, the guide also includes sound recordings, video cassettes, microcomputer software programs, CD-ROM products, and videodiscs). This 20th anniversary edition contains several special features,…

  8. Developments in the recovery of colour in fine art prints using spatial image processing

    NASA Astrophysics Data System (ADS)

    Rizzi, A.; Parraman, C.

    2010-06-01

    Printmakers have at their disposal a wide range of colour printing processes. The majority of artists will utilise high quality materials with the expectation that the best materials and pigments will ensure image permanence. However, as many artists have experienced, this is not always the case. Inks, papers and materials can deteriorate over time. For artists and conservators who need to restore colour or tone to a print could benefit from the assistance of spatial colour enhancement tools. This paper studies two collections from the same edition of fine art prints that were made in 1991. The first edition has been kept in an archive and not exposed to light. The second edition has been framed and exposed to light for about 18 years. Previous experiments using colour enhancement methods [9,10] have involved a series of photographs that had been taken under poor or extreme lighting conditions, fine art works, scanned works. There are a range of colour enhancement methods: Retinex, RSR, ACE, Histogram Equalisation, Auto Levels, which are described in this paper. In this paper we will concentrate on the ACE algorithm and use a range of parameters to process the printed images and describe these results.

  9. Biomimetic 4D printing.

    PubMed

    Gladman, A Sydney; Matsumoto, Elisabetta A; Nuzzo, Ralph G; Mahadevan, L; Lewis, Jennifer A

    2016-04-01

    Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies. PMID:26808461

  10. Biomimetic 4D printing

    NASA Astrophysics Data System (ADS)

    Sydney Gladman, A.; Matsumoto, Elisabetta A.; Nuzzo, Ralph G.; Mahadevan, L.; Lewis, Jennifer A.

    2016-04-01

    Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.

  11. Electrohydrodynamic Printing and Manufacturing

    NASA Technical Reports Server (NTRS)

    Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor); Poon, Hak Fei (Inventor); Korkut, Sibel (Inventor); Chen, Chuan-hua (Inventor)

    2014-01-01

    An stable electrohydrodynamic filament is obtained by causing a straight electrohydrodynamic filament formed from a liquid to emerge from a Taylor cone, the filament having a diameter of from 10 nm to 100.mu.m. Such filaments are useful in electrohydrodynamic printing and manufacturing techniques and their application in liquid drop/particle and fiber production, colloidal deployment and assembly, and composite materials processing.

  12. Plasmonic colour laser printing

    NASA Astrophysics Data System (ADS)

    Zhu, Xiaolong; Vannahme, Christoph; Højlund-Nielsen, Emil; Mortensen, N. Asger; Kristensen, Anders

    2016-04-01

    Colour generation by plasmonic nanostructures and metasurfaces has several advantages over dye technology: reduced pixel area, sub-wavelength resolution and the production of bright and non-fading colours. However, plasmonic colour patterns need to be pre-designed and printed either by e-beam lithography (EBL) or focused ion beam (FIB), both expensive and not scalable processes that are not suitable for post-processing customization. Here we show a method of colour printing on nanoimprinted plasmonic metasurfaces using laser post-writing. Laser pulses induce transient local heat generation that leads to melting and reshaping of the imprinted nanostructures. Depending on the laser pulse energy density, different surface morphologies that support different plasmonic resonances leading to different colour appearances can be created. Using this technique we can print all primary colours with a speed of 1 ns per pixel, resolution up to 127,000 dots per inch (DPI) and power consumption down to 0.3 nJ per pixel.

  13. Ethics manual: fifth edition.

    PubMed

    Snyder, Lois; Leffler, Cathy

    2005-04-01

    Medicine, law, and social values are not static. Reexamining the ethical tenets of medical practice and their application in new circumstances is a necessary exercise. The fifth edition of the College's Ethics Manual covers emerging issues in medical ethics and revisits old ones. It reflects on many of the ethical tensions faced by internists and their patients and attempts to shed light on how existing principles extend to emerging concerns. In addition, by reiterating ethical principles that have provided guidance in resolving past ethical problems, the Manual may help physicians avert future problems. The Manual is not a substitute for the experience and integrity of individual physicians, but it may serve as a reminder of the shared obligations and duties of the medical profession. PMID:15809467

  14. Tool steels. 5. edition

    SciTech Connect

    Roberts, G.; Krauss, G.; Kennedy, R.

    1998-12-31

    The revision of this authoritative work contains a significant amount of new information from the past nearly two decades presented in an entirely new outline, making this a must have reference for engineers involved in tool-steel production, as well as in the selection and use of tool steels in metalworking and other materials manufacturing industries. The chapter on tool-steel manufacturing includes new production processes, such as electroslag refining, vacuum arc remelting, spray deposition processes (Osprey and centrifugal spray), and powder metal processing. The seven chapters covering tool-steel types in the 4th Edition have been expanded to 11 chapters covering nine main groups of tool steels as well as other types of ultrahigh strength steels sometimes used for tooling. Each chapter discusses in detail processing, composition, and applications specific to the particular group. In addition, two chapters have been added covering surface modification and trouble shooting production and performance problems.

  15. Volcanoes, Third Edition

    NASA Astrophysics Data System (ADS)

    Nye, Christopher J.

    It takes confidence to title a smallish book merely “Volcanoes” because of the impliction that the myriad facets of volcanism—chemistry, physics, geology, meteorology, hazard mitigation, and more—have been identified and addressed to some nontrivial level of detail. Robert and Barbara Decker have visited these different facets seamlessly in Volcanoes, Third Edition. The seamlessness comes from a broad overarching, interdisciplinary, professional understanding of volcanism combined with an exceptionally smooth translation of scientific jargon into plain language.The result is a book which will be informative to a very broad audience, from reasonably educated nongeologists (my mother loves it) to geology undergraduates through professional volcanologists. I bet that even the most senior professional volcanologists will learn at least a few things from this book and will find at least a few provocative discussions of subjects they know.

  16. [The activity of searching for books of Shang Han Lun (Treatise on Cold Pathogenic Diseases) of the Song edition].

    PubMed

    Qian, Chao-chen

    2010-01-01

    Originally, Shang Han Lun in the Song edition referred to the Shang Han Lun with large and small Chinese characters printed in the Northern Song Dynasty. In the Ming Dynasty, its only edition of Shang Han Lun with small Chinese characters was again block-printed in Zhong Jing Quan Shu (Zhongjing's Complete Works) by Zhao Keimei and then the original one disappeared. So the Shang Han Lun in Zhong Jing Quan Shu was considered as the Song edition. Only 6 sets were in existence in the world, and were read by myself; I have detailed records and photos of 5 of them. The article is the result of textual research on Shang Han Lun of Zhong Jing Quan Shu preserved in Taiwan National Palace Museum. PMID:20403262

  17. Practical writing and editing techniques

    SciTech Connect

    Hallinan, E.J.

    1984-01-01

    Technical writing and editing involve more than a knowledge of style and format. Often a draft must be prepared from existing documents and edited for content as well as style. A practical approach to writing and editing tasks includes increasing writer/editor exposure with cognizant personnel, researching source and legal documents, participating in project meetings, and reviewing the document by checking for inconsistencies and selectively questioning the contents. This approach will help the writer/editor prepare a reasonably accurate, politically acceptable document with a minimum of supervision.

  18. [Textual research on the engraved editions of Nei wai yan fang mi chuan (Secret Teaching of Proved Prescriptions for Internal and External Diseases)].

    PubMed

    Liu, Juan

    2015-01-01

    Zhao Lian's book Nei wai yan fang mi chuan (Secret Teaching of Proved Prescriptions for Internal and External Diseases) was firstly engraved in the 21st year of Guangxu reign of the Qing dynasty. There are altogether four different engraved editions separately collected in the Library of Academy of Medical Sciences, Library of Zhenjiang City, Library of Changchun University of TCM, and Library of Shanghai University of TCM, printed in different times with different sizes of its contents. It is better to call all these editions the engraved versions of Guangxu reign. All of them are engraved and printed after the mother edition with some blocks hollowed-out and supplemented. Hence, the title "engraved edition of Yiyou or the 11th year of Guangxu reign (1885) of the Qing dynasty" carried in The General Catalogue of Ancient Books of TCM is wrong. PMID:26268259

  19. Cell filling in gravure printing for printed electronics.

    PubMed

    Cen, Jialiang; Kitsomboonloha, Rungrot; Subramanian, Vivek

    2014-11-18

    Highly scaled direct gravure is a promising printing technique for printed electronics due to its large throughput, high resolution, and simplicity. Gravure can print features in the single micron range at printing speeds of ∼1 m/s by using an optimized cell geometry and optimized printing conditions. The filling of the cells on the gravure cylinder is a critical process, since the amount of ink in the cells strongly impacts printed feature size and quality. Therefore, an understanding of cell filling is crucial to make highly scaled gravure printed electronics viable. In this work we report a novel experimental setup to investigate the filling process in real time, coupled with numerical simulations to gain insight into the experimental observations. By varying viscosity and filling speed, we ensure that the dimensionless capillary number is a good indicator of filling regime in real gravure printing. In addition, we also examine the effect of cell size on filling as this is important for increasing printing resolution. In the light of experimental and simulation results, we are able to rationalize the dominant failure in the filling process, i.e., air entrapment, which is caused by contact line pinning and interface deformation over the cell opening. PMID:25343219

  20. Recent trends in print portals and Web2Print applications

    NASA Astrophysics Data System (ADS)

    Tuijn, Chris

    2009-01-01

    For quite some time now, the printing business has been under heavy pressure because of overcapacity, dropping prices and the delocalization of the production to low income countries. To survive in this competitive world, printers have to invest in tools that, on one hand, reduce the production costs and, on the other hand, create additional value for their customers (print buyers). The creation of customer portals on top of prepress production systems allowing print buyers to upload their content, approve the uploaded pages based on soft proofs (rendered by the underlying production system) and further follow-up the generation of the printed material, has been illustrative in this respect. These developments resulted in both automation for the printer and added value for the print buyer. Many traditional customer portals assume that the printed products have been identified before they are presented to the print buyer in the portal environment. The products are, in this case, typically entered by the printing organization in a so-called MISi system after the official purchase order has been received from the print buyer. Afterwards, the MIS system then submits the product to the customer portal. Some portals, however, also support the initiation of printed products by the print buyer directly. This workflow creates additional flexibility but also makes things much more complex. We here have to distinguish between special products that are defined ad-hoc by the print buyer and standardized products that are typically selected out of catalogs. Special products are most of the time defined once and the level of detail required in terms of production parameters is quite high. Systems that support such products typically have a built-in estimation module, or, at least, a direct connection to an MIS system that calculates the prices and adds a specific mark-up to calculate a quote. Often, the markup is added by an account manager on a customer by customer basis; in this

  1. Edit while watching: home video editing made easy

    NASA Astrophysics Data System (ADS)

    Campanella, Marco; Weda, Hans; Barbieri, Mauro

    2007-01-01

    In recent years, more and more people capture their experiences in home videos. However, home video editing still is a difficult and time-consuming task. We present the Edit While Watching system that allows users to automatically create and change a summary of a home video in an easy, intuitive and lean-back way. Based on content analysis, video is indexed, segmented, and combined with proper music and editing effects. The result is an automatically generated home video summary that is shown to the user. While watching it, users can indicate whether they like certain content, so that the system will adapt the summary to contain more content that is similar or related to the displayed content. During the video playback users can also modify and enrich the content, seeing immediately the effects of their changes. Edit While Watching does not require a complex user interface: a TV and a few keys of a remote control are sufficient. A user study has shown that it is easy to learn and to use, even if users expressed the need for more control in the editing operations and in the editing process.

  2. Water quality management library. 2. edition

    SciTech Connect

    Eckenfelder, W.W.; Malina, J.F.; Patterson, J.W.

    1998-12-31

    A series of ten books offered in conjunction with Water Quality International, the Biennial Conference and Exposition of the International Association on Water Pollution Research and Control (IAWPRC). Volume 1, Activated Sludge Process, Design and Control, 2nd edition, 1998: Volume 2, Upgrading Wastewater Treatment Plants, 2nd edition, 1998: Volume 3, Toxicity Reduction, 2nd edition, 1998: Volume 4, Municipal Sewage Sludge Management, 2nd edition, 1998: Volume 5, Design and Retrofit of Wastewater Treatment Plants for Biological Nutrient Removal, 1st edition, 1992: Volume 6, Dynamics and Control of the Activated Sludge Process, 2nd edition, 1998: Volume 7: Design of Anaerobic Processes for the Treatment of Industrial and Municipal Wastes, 1st edition, 1992: Volume 8, Groundwater Remediation, 1st edition, 1992: Volume 9, Nonpoint Pollution and Urban Stormwater Management, 1st edition, 1995: Volume 10, Wastewater Reclamation and Reuse, 1st edition, 1998.

  3. Multilaser print head

    NASA Astrophysics Data System (ADS)

    Goodman, Douglas S.; Roblee, Jeffrey W.; Plummer, William T.; Clark, Peter P.

    1998-12-01

    This paper discusses the optical and opto-mechanical design of a new laser head developed at Polaroid for printing Helios binary film for printing high quality medical hard copy images. The head is part of an external drum printer for 14' X 17' film. The pixel size is 84 X 84 micrometer, produced by four lasers, with the smallest printable spot 3 X 6 micrometer, to produce 4096 gray levels. Two pixels side-by-side are simultaneously printed. The head has eight independent 840 nm diode lasers manufactured by Polaroid. Each laser emits up to 1.1 W over an emission length of about 100 micrometer, with a particularly uniform nearfield irradiance. The lasers are microlensed to equalize the divergences in the two principal meridians. Each packaged laser is aligned in a field-replaceable illuminator whose output beam, focused at infinity, is bore-sighted in a mechanical cylinder. The illuminators are arranged roughly radially. Eight lenses image the laser nearfields on a multi-facet mirror produced by diamond machining. The mirror facets truncate the beams to give the desired pixel shapes and separations. A reducing afocal relay images the mirror onto the film. The final element is a molded aspheric lens, mounted in an actuator to maintain focus on the film. The focusing unit also comprises a triangulation-based focus sensor. The alignment procedures and fixtures were devised concurrently with the head for manufacturing simplicity. The main physical structure is a casting, into which reference surfaces are machined. All optical subassemblies are attached to this casting, with a mixture of optical alignment and self-location. Semi-kinematic cylinder-in-V methodology is utilized. The active alignment steps are done in a sequence that tends to reduce errors from previous steps.

  4. Versioning of printed products

    NASA Astrophysics Data System (ADS)

    Tuijn, Chris

    2004-12-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  5. Versioning of printed products

    NASA Astrophysics Data System (ADS)

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  6. Reproducing the old masters: applying colour mixing and painting methodologies to inkjet printing

    NASA Astrophysics Data System (ADS)

    Olen, Melissa; Padfield, Joseph; Parraman, Carinna

    2014-01-01

    This research investigates multi-channel inkjet printing methods, which deviate from standard colour management workflows by reflecting on art historical processes, including the construction of colour in old master works, to reproduce specific colour pigment mixes in print. This is approached by incorporating artist colour mixing principles relevant to traditional art making processes through direct n-channel printing and the implementation of multiple pass printing. By demanding specific ink colourants to be employed in print, as well as the application of mixing colour though layering, we can mimic the effects of the traditional processes. These printing methods also generate colour through a variety of colour mixtures that may not have been employed or achieved by the printer driver. The objective of this research is to explore colour mixing and layering techniques in the printing of inkjet reproductions of original artworks that will maintain subtle colour transitions in dark shadow regions. While these colours are lost in traditional inkjet reproduction, by using direct n-channel editing capabilities to reproduce a painted original with high dynamic range we can improve colour variation in the shadow regions.

  7. Marine botany. Second edition

    SciTech Connect

    Dawes, C.J.

    1998-12-01

    Marine plants are a diverse group that include unicellular algae, seaweeds, seagrasses, salt marshes, and mangrove forests. They carry out a variety of ecological functions and serve as the primary producers in coastal wetlands and oceanic waters. The theme that connects such a wide variety of plants is their ecology, which was also emphasized in the 1981 edition. The goal of this revision is to present taxonomic, physiological, chemical, and ecological aspects of marine plants, their adaptations, and how abiotic and biotic factors interact in their communities. The data are presented in a concise, comparative manner in order to identify similarities and differences between communities such as salt marsh and mangroves or subtidal seaweeds and seagrasses. To accomplish this, the text is organized into five chapters that introduce the marine habitats, consider abiotic and biotic factors, and anthropogenic influences on the communities followed by seven chapters that deal with microalgae, seaweeds, salt marshes, mangroves, seagrasses, and coral reefs. Two appendixes are included; one presents simple field techniques and the other is a summary of seaweed uses.

  8. Block-Cell-Printing for live single-cell printing

    PubMed Central

    Zhang, Kai; Chou, Chao-Kai; Xia, Xiaofeng; Hung, Mien-Chie; Qin, Lidong

    2014-01-01

    A unique live-cell printing technique, termed “Block-Cell-Printing” (BloC-Printing), allows for convenient, precise, multiplexed, and high-throughput printing of functional single-cell arrays. Adapted from woodblock printing techniques, the approach employs microfluidic arrays of hook-shaped traps to hold cells at designated positions and directly transfer the anchored cells onto various substrates. BloC-Printing has a minimum turnaround time of 0.5 h, a maximum resolution of 5 µm, close to 100% cell viability, the ability to handle multiple cell types, and efficiently construct protrusion-connected single-cell arrays. The approach enables the large-scale formation of heterotypic cell pairs with controlled morphology and allows for material transport through gap junction intercellular communication. When six types of breast cancer cells are allowed to extend membrane protrusions in the BloC-Printing device for 3 h, multiple biophysical characteristics of cells—including the protrusion percentage, extension rate, and cell length—are easily quantified and found to correlate well with their migration levels. In light of this discovery, BloC-Printing may serve as a rapid and high-throughput cell protrusion characterization tool to measure the invasion and migration capability of cancer cells. Furthermore, primary neurons are also compatible with BloC-Printing. PMID:24516129

  9. To edit or not to edit: regulation of ADAR editing specificity and efficiency.

    PubMed

    Deffit, Sarah N; Hundley, Heather A

    2016-01-01

    Hundreds to millions of adenosine (A)-to-inosine (I) modifications are present in eukaryotic transcriptomes and play an essential role in the creation of proteomic and phenotypic diversity. As adenosine and inosine have different base-pairing properties, the functional consequences of these modifications or 'edits' include altering coding potential, splicing, and miRNA-mediated gene silencing of transcripts. However, rather than serving as a static control of gene expression, A-to-I editing provides a means to dynamically rewire the genetic code during development and in a cell-type specific manner. Interestingly, during normal development, in specific cells, and in both neuropathological diseases and cancers, the extent of RNA editing does not directly correlate with levels of the substrate mRNA or the adenosine deaminase that act on RNA (ADAR) editing enzymes, implying that cellular factors are required for spatiotemporal regulation of A-to-I editing. The factors that affect the specificity and extent of ADAR activity have been thoroughly dissected in vitro. Yet, we still lack a complete understanding of how specific ADAR family members can selectively deaminate certain adenosines while others cannot. Additionally, in the cellular environment, ADAR specificity and editing efficiency is likely to be influenced by cellular factors, which is currently an area of intense investigation. Data from many groups have suggested two main mechanisms for controlling A-to-I editing in the cell: (1) regulating ADAR accessibility to target RNAs and (2) protein-protein interactions that directly alter ADAR enzymatic activity. Recent studies suggest cis- and trans-acting RNA elements, heterodimerization and RNA-binding proteins play important roles in regulating RNA editing levels in vivo. WIREs RNA 2016, 7:113-127. doi: 10.1002/wrna.1319. PMID:26612708

  10. [Research on Zhang's collated edition of Lei gong pao zhi lun (Master Lei's Discourse on Processing of Chinese Materia Medica)].

    PubMed

    Cheng, Li

    2010-05-01

    Lei gong pao zhi lun (Master Lei's Discourse on Processing of Chinese Materia Medica) collated by Zhang Ji, and printed by Zhang's Yisheng Tang in Chengdu in 1932 was the first collated edition. Its original edition was not Jing shi zheng lei bei ji ben cao (Classified Materia Medica from Historical Classics for Emergency) of the Song Dynasty, but was Xiu shi zhi nan (Instruction for Drug Processing) and Lei gong pao zhi yao xing jie (Explanation on Master Lei's Properties of Drugs Processing) of the Qing Dynasty. The contents of this collated edition was far from Lei gong pao zhi lun with many mistakes, and was not the best edition to study Lei gong pao zhi lun. PMID:21029711

  11. Guide to Producing Print Materials.

    ERIC Educational Resources Information Center

    Far West Lab. for Educational Research and Development, San Francisco, CA.

    This is a simple how-to-do it manual intended to help projects that wish to produce print materials. It highlights the stages involved in producing print materials, giving an overview of the steps required and offering hints on different approaches to the various processes. The manual begins with the comprehensive layout (dummy) stage and proceeds…

  12. CTD Writing and Editing Standards

    SciTech Connect

    Caruthers, C.M.

    1991-03-01

    The Computer and Telecommunication Division (CTD) recognizes that the communication of clear, accurate, reasonably complete information is essential to the success of its Laboratory mission. CTD therefore encourages all Division personnel to adhere to the principles of good writing and to the standards for grammar, usage, style, formats, and publication procedures that are described in CTD Writing and Editing Standards. We encourage CTD personnel to read CTD Writing and Editing Standards and to use it continually as a desktop reference. It will help CTD writers to produce better documents consistent with CTD standards in less time. Applying the principles specified in this document on how to write and organize technical information will speed up the editing, review, and revision processes. CTD Writing and Editing Standards complements the Argonne National Laboratory Technical Publications Guide, which serves as the basic Argonne documentation reference on issues concerning DOE orders and guidelines, NRC directives, and other sponsor requirements. However, this Laboratory-wide document does not address matters of grammar or style. Documents recommended in CTD Writing and Editing Standards are usually available for purchase at the Document Distribution Counter (Building 221, Room A-134) or through the mail (by calling extension 2-5405 and ordering copies).

  13. Printed Module Interconnects

    SciTech Connect

    Stockert, Talysa R.; Fields, Jeremy D.; Pach, Gregory F.; Mauger, Scott A.; van Hest, Maikel F. A. M.

    2015-06-14

    Monolithic interconnects in photovoltaic modules connect adjacent cells in series, and are typically formed sequentially involving multiple deposition and scribing steps. Interconnect widths of 500 um every 10 mm result in 5% dead area, which does not contribute to power generation in an interconnected solar panel. This work expands on previous work that introduced an alternative interconnection method capable of producing interconnect widths less than 100 um. The interconnect is added to the module in a single step after deposition of the photovoltaic stack, eliminating the need for scribe alignment. This alternative method can be used for all types of thin film photovoltaic modules. Voltage addition with copper-indium-gallium-diselenide (CIGS) solar cells using a 2-scribe printed interconnect approach is demonstrated. Additionally, interconnect widths of 250 um are shown.

  14. Understanding Editing Behaviors in Multilingual Wikipedia.

    PubMed

    Kim, Suin; Park, Sungjoon; Hale, Scott A; Kim, Sooyoung; Byun, Jeongmin; Oh, Alice H

    2016-01-01

    Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary) languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language. PMID:27171158

  15. Understanding Editing Behaviors in Multilingual Wikipedia

    PubMed Central

    Hale, Scott A.; Kim, Sooyoung; Byun, Jeongmin; Oh, Alice H.

    2016-01-01

    Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary) languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language. PMID:27171158

  16. A structural determinant required for RNA editing

    PubMed Central

    Tian, Nan; Yang, Yun; Sachsenmaier, Nora; Muggenhumer, Dominik; Bi, Jingpei; Waldsich, Christina; Jantsch, Michael F.; Jin, Yongfeng

    2011-01-01

    RNA editing by adenosine deaminases acting on RNAs (ADARs) can be both specific and non-specific, depending on the substrate. Specific editing of particular adenosines may depend on the overall sequence and structural context. However, the detailed mechanisms underlying these preferences are not fully understood. Here, we show that duplex structures mimicking an editing site in the Gabra3 pre-mRNA unexpectedly fail to support RNA editing at the Gabra3 I/M site, although phylogenetic analysis suggest an evolutionarily conserved duplex structure essential for efficient RNA editing. These unusual results led us to revisit the structural requirement for this editing by mutagenesis analysis. In vivo nuclear injection experiments of mutated editing substrates demonstrate that a non-conserved structure is a determinant for editing. This structure contains bulges either on the same or the strand opposing the edited adenosine. The position of these bulges and the distance to the edited base regulate editing. Moreover, elevated folding temperature can lead to a switch in RNA editing suggesting an RNA structural change. Our results indicate the importance of RNA tertiary structure in determining RNA editing. PMID:21427087

  17. Gas Metal Arc Welding and Flux-Cored Arc Welding. Third Edition. Teacher Edition [and] Student Edition [and] Student Workbook.

    ERIC Educational Resources Information Center

    Knapp, John; Harper, Eddie

    This packet, containing a teacher's edition, a student edition, and a student workbook, introduces students to high deposition welding and processes for "shielding" a weld. In addition to general information, the teacher edition consists of introductory pages and teacher pages, as well as unit information that corresponds to the materials in the…

  18. Gas Tungsten Arc Welding and Plasma Arc Cutting. Teacher Edition [and] Student Edition [and] Student Workbook. Second Edition.

    ERIC Educational Resources Information Center

    Harper, Eddie; Knapp, John

    This packet of instructional materials for a gas tungsten arc welding (GTAW) and plasma arc cutting course is comprised of a teacher edition, student edition, and student workbook. The teacher edition consists of introductory pages and teacher pages. Introductory pages include training and competency profile, state duty/task crosswalk,…

  19. Genome editing comes of age.

    PubMed

    Kim, Jin-Soo

    2016-09-01

    Genome editing harnesses programmable nucleases to cut and paste genetic information in a targeted manner in living cells and organisms. Here, I review the development of programmable nucleases, including zinc finger nucleases (ZFNs), TAL (transcription-activator-like) effector nucleases (TALENs) and CRISPR (cluster of regularly interspaced palindromic repeats)-Cas9 (CRISPR-associated protein 9) RNA-guided endonucleases (RGENs). I specifically highlight the key advances that set the foundation for the rapid and widespread implementation of CRISPR-Cas9 genome editing approaches that has revolutionized the field. PMID:27490630

  20. Language Editing at Astronomy & Astrophysics

    NASA Astrophysics Data System (ADS)

    Adams, J.

    2011-07-01

    In 2002, the A&A Board of Directors voted that all articles must be written in English and decided to improve the overall quality of the language in the articles with the help of a team of language editors. This article reviews the general advantages of editing the English expression and describes both the aims of this effort and its place in the full publication process. This is followed by the Guide to language editing that has been available on the Journal's website for several years now.

  1. Concepts of genetics: II edition

    SciTech Connect

    Klug, W.S.; Cummings, M.R.

    1986-01-01

    This book provides an introduction to the molecule, and progresses logically through cellular genetics and the genetics of organisms to the larger picture of population genetics. The Second Edition features new chapters on quantitative inheritance and recombinant DNA, a new appendix with a human gene map and coverage of gene disorders, expanded coverage of bacterial and viral genetics, and consolidated coverage of sex linkage, sex determination, sex chromosome abberations, and sex differentiation. Dozens of new figures are added in this edition. All diagrams, photographs, and tables work hand-in-hand with the text to explain important concepts. Practical exercises with answers at the back of the text provide immediate feedback.

  2. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    ERIC Educational Resources Information Center

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  3. Shielded Metal Arc Pipe Welding. Teacher Edition. Second Edition.

    ERIC Educational Resources Information Center

    Fortney, Clarence; And Others

    This second edition of the shielded metal arc pipe welding curriculum guide presents both basic and advanced pipe welding skills. All specifications for procedure and welder qualification are presented according to national standards. The standards also include the test position for both groove and fillet pipe welding. The guide contains three…

  4. Civil Technology Applications. Teacher Edition [and] Student Edition.

    ERIC Educational Resources Information Center

    Schertz, Karen

    Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

  5. Inkjet-printed graphene electronics.

    PubMed

    Torrisi, Felice; Hasan, Tawfique; Wu, Weiping; Sun, Zhipei; Lombardo, Antonio; Kulmala, Tero S; Hsieh, Gen-Wen; Jung, Sungjune; Bonaccorso, Francesco; Paul, Philip J; Chu, Daping; Ferrari, Andrea C

    2012-04-24

    We demonstrate inkjet printing as a viable method for large-area fabrication of graphene devices. We produce a graphene-based ink by liquid phase exfoliation of graphite in N-methylpyrrolidone. We use it to print thin-film transistors, with mobilities up to ∼95 cm(2) V(-1) s(-1), as well as transparent and conductive patterns, with ∼80% transmittance and ∼30 kΩ/□ sheet resistance. This paves the way to all-printed, flexible, and transparent graphene devices on arbitrary substrates. PMID:22449258

  6. Conductive nanomaterials for printed electronics.

    PubMed

    Kamyshny, Alexander; Magdassi, Shlomo

    2014-09-10

    This is a review on recent developments in the field of conductive nanomaterials and their application in printed electronics, with particular emphasis on inkjet printing of ink formulations based on metal nanoparticles, carbon nanotubes, and graphene sheets. The review describes the basic properties of conductive nanomaterials suitable for printed electronics (metal nanoparticles, carbon nanotubes, and graphene), their stabilization in dispersions, formulations of conductive inks, and obtaining conductive patterns by using various sintering methods. Applications of conductive nanomaterials for electronic devices (transparent electrodes, metallization of solar cells, RFID antennas, TFTs, and light emitting devices) are also briefly reviewed. PMID:25340186

  7. Requirements for printed wiring boards

    NASA Technical Reports Server (NTRS)

    1984-01-01

    In order to maintain the high standards of the NASA printed wiring programs, this publication: prescribes NASA's requirements for assuring reliable rigid printed wiring boards; describes and incorporates basic considerations necessary to assure reliable rigid printed wiring boards; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

  8. Controlled flexibility in technical editing - The levels-of-edit concept at JPL

    NASA Technical Reports Server (NTRS)

    Buehler, M. F.

    1977-01-01

    The levels-of-edit concept, which can be used to specify the amount of editorial effort involved in the preparation of a manuscript for publication, is discussed. Nine types of editing are identified and described. These include coordination edit (preparing estimates, gathering cost data, monitoring production processes), policy edit, integrity edit (making sure that parts of a publication match in a physical or numerical sense), screening edit (ensuring that the quality of camera-ready copy is sufficient for external publication), copy clarification edit, format edit, mechanical style edit, language edit, and substantive edit (reviewing the manuscript for content coherence, emphasis, subordination and parallelism). These functions are grouped into five levels of edit. An edit-level number is assigned to each manuscript, providing a quantitative and qualitative indicator of the editing to be done which is clearly understood by authors, managers, and editors alike. In addition, clear boundaries are drawn between normal and extraordinary editing tasks. Individual organizations will group various edits in different ways to reflect their needs and priorities; the essential element of the system is unambiguous definition and coding of the types and amount of work to be done.

  9. Strategies of Qualitative Inquiry. Third Edition

    ERIC Educational Resources Information Center

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    2007-01-01

    "Strategies of Qualitative Inquiry, Third Edition," the second volume in the paperback version of "The SAGE Handbook of Qualitative Research, 3rd Edition," consists of Part III of the handbook ("Strategies of Inquiry"). "Strategies of Qualitative Inquiry, Third Edition" presents the major tactics--historically, the research methods--that…

  10. 48 CFR 53.102 - Current editions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Current editions. 53.102... AND FORMS FORMS General 53.102 Current editions. The form prescriptions in subpart 53.2 and the illustrations in subpart 53.3 contain current edition dates. Contracting officers shall use the current...

  11. 48 CFR 53.102 - Current editions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Current editions. 53.102... AND FORMS FORMS General 53.102 Current editions. The form prescriptions in subpart 53.2 and the illustrations in subpart 53.3 contain current edition dates. Contracting officers shall use the current...

  12. 48 CFR 53.102 - Current editions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false Current editions. 53.102... AND FORMS FORMS General 53.102 Current editions. The form prescriptions in subpart 53.2 and the illustrations in subpart 53.3 contain current edition dates. Contracting officers shall use the current...

  13. 48 CFR 53.102 - Current editions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false Current editions. 53.102... AND FORMS FORMS General 53.102 Current editions. The form prescriptions in subpart 53.2 and the illustrations in subpart 53.3 contain current edition dates. Contracting officers shall use the current...

  14. 48 CFR 53.102 - Current editions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Current editions. 53.102... AND FORMS FORMS General 53.102 Current editions. The form prescriptions in subpart 53.2 and the illustrations in subpart 53.3 contain current edition dates. Contracting officers shall use the current...

  15. Detection of latent prints by Raman imaging

    SciTech Connect

    Lewis, Linda Anne; Connatser, Raynella Magdalene; Lewis, Sr., Samuel Arthur

    2011-01-11

    The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

  16. Environmental Print: Real-World Early Reading

    ERIC Educational Resources Information Center

    Prior, Jennifer

    2009-01-01

    What is environmental print? It is symbols all around. Environmental print is on signs, billboards, packages, junk mail, and everywhere. Young children easily recognize environmental print in their surroundings. Their everyday experiences with print are an important classroom tool to help children connect what they already know about written…

  17. Using the Internet, Online Services, and CD-ROMs for Writing Research and Term Papers, Second Edition. Neal-Schuman NetGuide Series.

    ERIC Educational Resources Information Center

    Harmon, Charles, Ed.

    Like its predecessor, this second edition combines the best of two traditional generic texts: "how to write a term paper" and "how to use the library." Particularly helpful for high school and first year college students, this guide explains how to utilize online library catalogs, the most commonly available indexes and databases (in print,…

  18. 3D Printed Robotic Hand

    NASA Technical Reports Server (NTRS)

    Pizarro, Yaritzmar Rosario; Schuler, Jason M.; Lippitt, Thomas C.

    2013-01-01

    Dexterous robotic hands are changing the way robots and humans interact and use common tools. Unfortunately, the complexity of the joints and actuations drive up the manufacturing cost. Some cutting edge and commercially available rapid prototyping machines now have the ability to print multiple materials and even combine these materials in the same job. A 3D model of a robotic hand was designed using Creo Parametric 2.0. Combining "hard" and "soft" materials, the model was printed on the Object Connex350 3D printer with the purpose of resembling as much as possible the human appearance and mobility of a real hand while needing no assembly. After printing the prototype, strings where installed as actuators to test mobility. Based on printing materials, the manufacturing cost of the hand was $167, significantly lower than other robotic hands without the actuators since they have more complex assembly processes.

  19. 3D printing in dentistry.

    PubMed

    Dawood, A; Marti Marti, B; Sauret-Jackson, V; Darwood, A

    2015-12-01

    3D printing has been hailed as a disruptive technology which will change manufacturing. Used in aerospace, defence, art and design, 3D printing is becoming a subject of great interest in surgery. The technology has a particular resonance with dentistry, and with advances in 3D imaging and modelling technologies such as cone beam computed tomography and intraoral scanning, and with the relatively long history of the use of CAD CAM technologies in dentistry, it will become of increasing importance. Uses of 3D printing include the production of drill guides for dental implants, the production of physical models for prosthodontics, orthodontics and surgery, the manufacture of dental, craniomaxillofacial and orthopaedic implants, and the fabrication of copings and frameworks for implant and dental restorations. This paper reviews the types of 3D printing technologies available and their various applications in dentistry and in maxillofacial surgery. PMID:26657435

  20. Strengthening Family Resilience, Second Edition

    ERIC Educational Resources Information Center

    Walsh, Froma

    2006-01-01

    In a fully revised, updated, and expanded second edition, this informative clinical resource and text presents Froma Walsh's family resilience framework for intervention and prevention with clients dealing with adversity. Drawing on extensive research and clinical experience, the author describes key processes in resilience for practitioners to…

  1. Teaching Population Concepts. Revised Edition.

    ERIC Educational Resources Information Center

    King, Pat; Landahl, John

    This edition is designed to help teachers provide their students with some basic population concepts with stress placed on the elements of decision making. In the first section of the pamphlet, some of the basic concepts of population study are presented. These include populations, growth rates, birth and death rates, doubling time, migration, age…

  2. Veterinary Microbiology, 3rd Edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...

  3. Nuclear Electricity. 5th Edition.

    ERIC Educational Resources Information Center

    Hore-Lacy, Ian

    Educators must address the need for young people to be informed about both the scientific concepts and the reasons for controversy when dealing with controversial issues. Young people must be given the opportunity to form their own opinions when presented with evidence for conflicting arguments. Previous editions of "Nuclear Electricity" have…

  4. The Horizon Report. 2007 Edition

    ERIC Educational Resources Information Center

    New Media Consortium, 2007

    2007-01-01

    This fourth edition of the New Media Consortium's (NMC) annual "Horizon Report" describes the continuing work of the Horizon Project, a research-oriented effort that seeks to identify and describe emerging technologies likely to have a large impact on teaching, learning, or creative expression within higher education. Drawing on ongoing…

  5. Biology Teachers' Handbook, Second Edition.

    ERIC Educational Resources Information Center

    Klinckmann, Evelyn; And Others

    This is the second edition of the handbook written for teachers using the Biological Sciences Curriculum Study (BSCS) materials. Section one describes the historical background, aims and emphases of the BSCS materials and includes behavioral objectives for teaching inquiry processes. Section two includes 44 "Invitations to Enquiry." Section three,…

  6. A Writer's Reference. Third Edition.

    ERIC Educational Resources Information Center

    Hacker, Diana

    Designed to save the user time and packaged in a compact size which lies flat, this book is easy to consult while revising and editing a written draft. The book's "main menu," just inside the front cover, displays the contents as briefly and simply as possible. Each of the 12 sections in the book's main menu leads the user to a tabbed divider, on…

  7. Teaching Reading Sourcebook, Second Edition

    ERIC Educational Resources Information Center

    Honig, Bill; Diamond, Linda; Gutlohn, Linda

    2008-01-01

    The "Teaching Reading Sourcebook, Second Edition" is a comprehensive reference about reading instruction. Organized according to the elements of explicit instruction (what? why? when? and how?), the "Sourcebook" includes both a research-informed knowledge base and practical sample lesson models. It teaches the key elements of an effective reading…

  8. The Foundation Directory, Edition 4.

    ERIC Educational Resources Information Center

    Lewis, Marianna O., Ed.; Bowers, Patricia, Ed.

    The fourth edition of "The Foundation Directory" lists and describes 5,454 foundations and surveys their grants. The directory was prepared from foundation reports and government records. The foundations listed either have assets of $500.00 or made grants totally at least $25,000.00 in the year of record. Education is the leading beneficiary of…

  9. Promoting School Success. Third Edition

    ERIC Educational Resources Information Center

    Lovitt, Thomas C.

    2007-01-01

    Like its two predecessors, "Preventing School Dropouts" [C1991] and "Preventing School Failure" [C2000], this third edition is a book about teaching. Although primarily written for teachers, tutors and parents may also find this book helpful. It is a collection of carefully selected teaching techniques aimed at helping young adults learn important…

  10. Resident Care Guide. Third Edition.

    ERIC Educational Resources Information Center

    Woodbridge State School, NJ.

    The third edition of the Woodbridge State School Cottage Life Department Resident Care Guide is explained to be a developmental status scale devised in 1969 as part of a 5-year study for the purposes of measuring the entire population's self-help training abilities. The department is said to serve 954 residents; 424 are non-ambulatory and 530 are…

  11. Modern Indian Psychology. Revised Edition.

    ERIC Educational Resources Information Center

    Bryde, John F.

    Written on the basis of senior Indian verbal relatings collected over a 23-year span, this revised edition on modern Indian psychology incorporates suggestions from Indian students and their teachers, Indian and non-Indian social studies experts, and other Indian people. The book contains 6 major divisions: (1) "Culture and Indian Values" relates…

  12. Money and Schools. Fifth Edition

    ERIC Educational Resources Information Center

    Thompson, David C.; Crampton, Faith E.; Wood, R. Craig

    2012-01-01

    In the new edition of this essential, all-inclusive text, the authors provide more important research for future principals and others enrolled in graduate-level school finance courses. Written in a style that is highly readable, the book offers strong connections to real-world experiences. Readers get both a broad overview of funding concepts and…

  13. Unlocking Mathematics Teaching. Second Edition

    ERIC Educational Resources Information Center

    Koshy, Valsa, Ed.; Murray, Jean, Ed.

    2011-01-01

    Now in a fully updated second edition, "Unlocking Mathematics Teaching" is a comprehensive guide to teaching mathematics in the primary school. Combining theory and practice, selected experts outline the current context of mathematics education. They suggest strategies, activities and examples to help develop readers understanding and confidence…

  14. The Horizon Report. 2006 Edition

    ERIC Educational Resources Information Center

    New Media Consortium, 2006

    2006-01-01

    This third edition of the New Media Consortium's (NMC) annual "Horizon Report" describes the continuing work of the Horizon Project, a research-oriented effort that seeks to identify and describe emerging technologies likely to have a large impact on teaching, learning, or creative expression within higher education. Drawing on ongoing discussions…

  15. Writing Back: Revising and Editing.

    ERIC Educational Resources Information Center

    Johnstone, Velerie M.

    1990-01-01

    Discusses a "write-back" strategy for use when there is insufficient class time for conferencing with peers or the teacher. Notes that the teacher agrees to respond to students' drafts within 24 hours. Discusses 3 options available to students: (1) write back/respond; (2) edit; and (3) writing back. (RS)

  16. The Horizon Report. 2004 Edition

    ERIC Educational Resources Information Center

    New Media Consortium, 2004

    2004-01-01

    This first edition of the New Media Consortium's (NMC) annual "Horizon Report" details findings of the Horizon Project, a research-oriented effort that seeks to identify and describe emerging technologies likely to have a large impact on teaching, learning, or creative expression within higher education. Drawing on an ongoing series of interviews…

  17. The Horizon Report. 2005 Edition

    ERIC Educational Resources Information Center

    New Media Consortium, 2005

    2005-01-01

    This second edition of the New Media Consortium's (NMC) annual "Horizon Report" describes the continuing work of the Horizon Project, a research-oriented effort that seeks to identify and describe emerging technologies likely to have a large impact on teaching, learning, or creative expression within higher education. Drawing on an ongoing series…

  18. Multicolor lasing prints

    NASA Astrophysics Data System (ADS)

    Ta, Van Duong; Yang, Shancheng; Wang, Yue; Gao, Yuan; He, Tingchao; Chen, Rui; Demir, Hilmi Volkan; Sun, Handong

    2015-11-01

    This work demonstrates mass production of printable multi-color lasing microarrays based on uniform hemispherical microcavities on a distributed Bragg reflector using inkjet technique. By embedding two different organic dyes into these prints, optically pumped whispering gallery mode microlasers with lasing wavelengths in green and red spectral ranges are realized. The spectral linewidth of the lasing modes is found as narrow as 0.11 nm. Interestingly, dual-color lasing emission in the ranges of 515-535 nm and 585-605 nm is simultaneously achieved by using two different dyes with certain ratios. Spectroscopic measurements elucidate the energy transfer process from the green dye (donor) to the red one (acceptor) with an energy transfer efficiency up to 80% in which the nonradiative Förster resonance energy transfer dominates. As such, the acceptor lasing in the presence of donor exhibits a significantly lower (˜2.5-fold) threshold compared with that of the pure acceptor lasing with the same concentration.

  19. Silver Ink For Jet Printing

    NASA Technical Reports Server (NTRS)

    Vest, R. W.; Singaram, Saraswathi

    1989-01-01

    Metallo-organic ink containing silver (with some bismuth as adhesion agent) applied to printed-circuit boards and pyrolized in air to form electrically conductive patterns. Ink contains no particles of silver, does not have to be mixed during use to maintain homogeneity, and applied to boards by ink-jet printing heads. Consists of silver neodecanoate and bismuth 2-ethylhexanoate dissolved in xylene and/or toluene.

  20. Organ printing: promises and challenges.

    PubMed

    Mironov, Vladimir; Kasyanov, Vladimir; Drake, Christopher; Markwald, Roger R

    2008-01-01

    Organ printing or biomedical application of rapid prototyping, also defined as additive layer-by-layer biomanufacturing, is an emerging transforming technology that has potential for surpassing traditional solid scaffold-based tissue engineering. Organ printing has certain advantages: it is an automated approach that offers a pathway for scalable reproducible mass production of tissue engineered products; it allows a precised simultaneous 3D positioning of several cell types; it enables creation tissue with a high level of cell density; it can solve the problem of vascularization in thick tissue constructs; finally, organ printing can be done in situ. The ultimate goal of organ-printing technology is to fabricate 3D vascularized functional living human organs suitable for clinical implantation. The main practical outcomes of organ-printing technology are industrial scalable robotic biofabrication of complex human tissues and organs, automated tissue-based in vitro assays for clinical diagnostics, drug discovery and drug toxicity, and complex in vitro models of human diseases. This article describes conceptual framework and recent developments in organ-printing technology, outlines main technological barriers and challenges, and presents potential future practical applications. PMID:18154465

  1. Occupational noise in printing companies.

    PubMed

    Mihailovic, Aleksandra; Grujic, Selena D; Kiurski, Jelena; Krstic, Jelena; Oros, Ivana; Kovacevic, Ilija

    2011-10-01

    The extent of noise in five printing companies in Novi Sad, Serbia, was determined using TES-1358A Sound Analyzer with RS-232 Interface. The data on equivalent A-level (dBA), as well as, maximum and minimum sound pressure levels were collected. It was found that folders and offset printing units are the predominant noise sources, with the average L (eq) levels of 87.66 and 82.7 dBA, respectively. Forty percent of the machines produced noise levels above the limiting threshold level of 85 dBA, allowed by law. The noise in all printing companies was dominated by higher frequency noise, and the maximum level mostly appeared at 4,000 Hz. For offset printing machines and folders, the means of L (eq) levels exceeded the permissible levels given by NR-80 curve at higher frequencies. There are no published studies of occupational noise and hearing impairment of workers exposed to hazardous noise in printing industry in Serbia. More extensive studies are needed to determine the exact impact of noise on the workers. Technical and organizational measures in order to control noise and prevent noise exposure, and general hearing conservation program to protect workers, should be introduced in printing industry. PMID:21161679

  2. Are substitution rates and RNA editing correlated?

    PubMed Central

    2010-01-01

    Background RNA editing is a post-transcriptional process that, in seed plants, involves a cytosine to uracil change in messenger RNA, causing the translated protein to differ from that predicted by the DNA sequence. RNA editing occurs extensively in plant mitochondria, but large differences in editing frequencies are found in some groups. The underlying processes responsible for the distribution of edited sites are largely unknown, but gene function, substitution rate, and gene conversion have been proposed to influence editing frequencies. Results We studied five mitochondrial genes in the monocot order Alismatales, all showing marked differences in editing frequencies among taxa. A general tendency to lose edited sites was observed in all taxa, but this tendency was particularly strong in two clades, with most of the edited sites lost in parallel in two different areas of the phylogeny. This pattern is observed in at least four of the five genes analyzed. Except in the groups that show an unusually low editing frequency, the rate of C-to-T changes in edited sites was not significantly higher that in non-edited 3rd codon positions. This may indicate that selection is not actively removing edited sites in nine of the 12 families of the core Alismatales. In all genes but ccmB, a significant correlation was found between frequency of change in edited sites and synonymous substitution rate. In general, taxa with higher substitution rates tend to have fewer edited sites, as indicated by the phylogenetically independent correlation analyses. The elimination of edited sites in groups that lack or have reduced levels of editing could be a result of gene conversion involving a cDNA copy (retroprocessing). If so, this phenomenon could be relatively common in the Alismatales, and may have affected some groups recurrently. Indirect evidence of retroprocessing without a necessary correlation with substitution rate was found mostly in families Alismataceae and Hydrocharitaceae

  3. Diesel Technology: Steering and Suspension. Second Edition. Teacher Edition [and] Student Edition.

    ERIC Educational Resources Information Center

    Miller, Roger; Scarberry, Terry; Tesch, Carl; Kellum, Mary

    These teacher and student editions on steering and suspension are part of the diesel mechanics series of instructional materials. The series aligns with the medium/heavy duty truck task list developed by the National Automotive Technicians Education Foundation and used by the National Institute for Automotive Service Excellence in the…

  4. Diesel Technology: Safety Skills. Teacher Edition [and] Student Edition. Second Edition.

    ERIC Educational Resources Information Center

    Kellum, Mary

    Teacher and student editions of this document are one in a series of competency-based instructional materials for diesel technology programs. The series aligns with the medium/heavy diesel duty truck task list used by the National Institute for Automotive Service Excellence in the certification of medium/heavy duty truck technicians. Introductory…

  5. Printing nanotube/nanowire for flexible microsystems

    NASA Astrophysics Data System (ADS)

    Tortorich, Ryan P.; Choi, Jin-Woo

    2014-04-01

    Printing has become an emerging manufacturing technology for mechanics, electronics, and consumer products. Additionally, both nanotubes and nanowires have recently been used as materials for sensors and electrodes due to their unique electrical and mechanical properties. Printed electrodes and conductive traces particularly offer versatility of fabricating low-cost, disposable, and flexible electrical devices and microsystems. While various printing methods such as screen printing have been conventional methods for printing conductive traces and electrodes, inkjet printing has recently attracted great attention due to its unique advantages including no template requirement, rapid printing at low cost, on-demand printing capability, and precise control of the printed material. Computer generated conductive traces or electrode patterns can simply be printed on a thin film substrate with proper conductive ink consisting of nanotubes or nanowires. However, in order to develop nanotube or nanowire ink, there are a few challenges that need to be addressed. The most difficult obstacle to overcome is that of nanotube/nanowire dispersion within a solution. Other challenges include adjusting surface tension and controlling viscosity of the ink as well as treating the surface of the printing substrate. In an attempt to pave the way for nanomaterial inkjet printing, we present a method for preparing carbon nanotube ink as well as its printing technique. A fully printed electrochemical sensor using inkjet-printed carbon nanotube electrodes is also demonstrated as an example of the possibilities for this technology.

  6. 3D printed biomimetic vascular phantoms for assessment of hyperspectral imaging systems

    NASA Astrophysics Data System (ADS)

    Wang, Jianting; Ghassemi, Pejhman; Melchiorri, Anthony; Ramella-Roman, Jessica; Mathews, Scott A.; Coburn, James; Sorg, Brian; Chen, Yu; Pfefer, Joshua

    2015-03-01

    The emerging technique of three-dimensional (3D) printing provides a revolutionary way to fabricate objects with biologically realistic geometries. Previously we have performed optical and morphological characterization of basic 3D printed tissue-simulating phantoms and found them suitable for use in evaluating biophotonic imaging systems. In this study we assess the potential for printing phantoms with irregular, image-defined vascular networks that can be used to provide clinically-relevant insights into device performance. A previously acquired fundus camera image of the human retina was segmented, embedded into a 3D matrix, edited to incorporate the tubular shape of vessels and converted into a digital format suitable for printing. A polymer with biologically realistic optical properties was identified by spectrophotometer measurements of several commercially available samples. Phantoms were printed with the retinal vascular network reproduced as ~1.0 mm diameter channels at a range of depths up to ~3 mm. The morphology of the printed vessels was verified by volumetric imaging with μ-CT. Channels were filled with hemoglobin solutions at controlled oxygenation levels, and the phantoms were imaged by a near-infrared hyperspectral reflectance imaging system. The effect of vessel depth on hemoglobin saturation estimates was studied. Additionally, a phantom incorporating the vascular network at two depths was printed and filled with hemoglobin solution at two different saturation levels. Overall, results indicated that 3D printed phantoms are useful for assessing biophotonic system performance and have the potential to form the basis of clinically-relevant standardized test methods for assessment of medical imaging modalities.

  7. Statistical Physics Approaches to RNA Editing

    NASA Astrophysics Data System (ADS)

    Bundschuh, Ralf

    2012-02-01

    The central dogma of molecular Biology states that DNA is transcribed base by base into RNA which is in turn translated into proteins. However, some organisms edit their RNA before translation by inserting, deleting, or substituting individual or short stretches of bases. In many instances the mechanisms by which an organism recognizes the positions at which to edit or by which it performs the actual editing are unknown. One model system that stands out by its very high rate of on average one out of 25 bases being edited are the Myxomycetes, a class of slime molds. In this talk we will show how the computational methods and concepts from statistical Physics can be used to analyze DNA and protein sequence data to predict editing sites in these slime molds and to guide experiments that identified previously unknown types of editing as well as the complete set of editing events in the slime mold Physarum polycephalum.

  8. Language-based color editing for mobile device

    NASA Astrophysics Data System (ADS)

    Zhao, Yonghui; Bala, Raja; Braun, Karen M.; Langford, Zahra; Rolleston, Robert J.; Stevens, Michael T.

    2011-03-01

    Natural language color (NLC) was initially developed as a web-based application and then deployed in one Xerox print driver. NLC changes the image-editing paradigm from the use of curves, sliders, and knobs, to the use of verbal text-based commands such as "make light green much less yellowish". The technology appeals to a common user who has no expert knowledge in color science, and this naturally leads one to think about its use in mobile devices. A prototype GUI design for a language-based color editing on iPhone platform will be presented that uses several of its haptic interfaces (e.g. "slot-machine", shaking, swiping, etc.). A textual interface is provided to select a color to be modified within the image and a direction of change for the modification. A swipe interface is provided to select a magnitude and polarity for the modification. Actions on the textual and swipe interface are converted to natural language commands that are in turn used to derive a color transformation that is applied to relevant portions of the image to yield a modified image. The modifications are displayed in real time to the user.

  9. Study of Impingement Types and Printing Quality during Laser Printing of Viscoelastic Alginate Solutions.

    PubMed

    Zhang, Zhengyi; Xiong, Ruitong; Corr, David T; Huang, Yong

    2016-03-29

    Laser-induced forward transfer-based laser printing has been being implemented as a promising orifice-free direct-write strategy for different printing applications. The printing quality during laser printing is largely affected by the jet and droplet formation process and subsequential impingement. The objective of this study is to investigate the impingement-based printing type and resulting printing quality during the laser printing of viscoelastic alginate solutions, which are representative inks for soft structure printing such as bioprinting. Three printing types are identified: droplet-impingement printing, jet-impingement printing with multiple breakups, and jet-impingement printing with a single breakup. Printing quality, in terms of printed droplet morphology and size, has been investigated as a function of alginate concentration, laser fluence, and direct-writing height based on a time-resolved imaging approach and microarrays of printed droplets. Of these, the best printing quality is achieved with single-breakup jet-impingement printing, followed by multiple-breakup jet-impingement printing, with droplet-impingement printing producing the lowest quality printing. The printing quality can be improved by using high-concentration alginate solutions. The increase of laser fluence may lead to a well-defined primary droplet for low-concentration alginate solutions; however, this can cause the droplet diameter to increase, which may not be desirable. The direct-writing height (i.e., ribbon coating-receiving substrate distance) also influences the print quality. For example, an increase in direct-writing height can cause the printing type to change from the ideal jet-impingement with a single breakup, to the jet-impingement with multiple breakups, and even the least desired droplet-impingement printing, with only slight variations in droplet diameter. PMID:26934283

  10. Correlation Among Lip Print Pattern, Finger Print Pattern and Abo Blood Group

    PubMed Central

    N, Srilekha; A, Anuradha; Srinivas G, Vijay; Devi R, Sabitha

    2014-01-01

    Aim: To study correlation between lip print pattern, finger print pattern and ABO blood group. Materials and Methods: The study group consisted of 27 males and 27 females who were aged between 20–40 years. Lip prints, finger prints and ABO and Rh blood groups of each individual were recorded. Lip prints were classified, based on Suzuki’s and Tsuchihashi’s classification and finger prints were classified, based on Michael’s and Kucken’s classification. The results were statistically analyzed by using Chi–square test. Results: Complete vertical lip print, loop finger print pattern, O+ blood group were predominant among individual groups. O+ blood group-type I lip print combination, loop finger print pattern-type IV lip print pattern combination, O+ blood group-loop finger print pattern combination and both B+ blood group-loop finger print pattern- type IV lip print pattern combination and O+ blood group-loop finger print pattern-type I lip print pattern were predominant. Conclusion: Though lip prints, finger prints and blood groups had their own specificities, correlation of the three parameters did not show any significance. PMID:24783079

  11. 3D Printing: Print the future of ophthalmology.

    PubMed

    Huang, Wenbin; Zhang, Xiulan

    2014-08-01

    The three-dimensional (3D) printer is a new technology that creates physical objects from digital files. Recent technological advances in 3D printing have resulted in increased use of this technology in the medical field, where it is beginning to revolutionize medical and surgical possibilities. It is already providing medicine with powerful tools that facilitate education, surgical planning, and organ transplantation research. A good understanding of this technology will be beneficial to ophthalmologists. The potential applications of 3D printing in ophthalmology, both current and future, are explored in this article. PMID:25159591

  12. The evolution of chloroplast RNA editing.

    PubMed

    Tillich, Michael; Lehwark, Pascal; Morton, Brian R; Maier, Uwe G

    2006-10-01

    RNA editing alters the nucleotide sequence of an RNA molecule so that it deviates from the sequence of its DNA template. Different RNA-editing systems are found in the major eukaryotic lineages, and these systems are thought to have evolved independently. In this study, we provide a detailed analysis of data on C-to-U editing sites in land plant chloroplasts and propose a model for the evolution of RNA editing in land plants. First, our data suggest that the limited RNA-editing system of seed plants and the much more extensive systems found in hornworts and ferns are of monophyletic origin. Further, although some eukaryotic editing systems appear to have evolved to regulate gene expression, or at least are now involved in gene regulation, there is no evidence that RNA editing plays a role in gene regulation in land plant chloroplasts. Instead, our results suggest that land plant chloroplast C-to-U RNA editing originated as a mechanism to generate variation at the RNA level, which could complement variation at the DNA level. Under this model, many of the original sites, particularly in seed plants, have been subsequently lost due to mutation at the DNA level, and the function of extant sites is merely to conserve certain codons. This is the first comprehensive model for the evolution of the chloroplast RNA-editing system of land plants and may also be applicable to the evolution of RNA editing in plant mitochondria. PMID:16835291

  13. Nanoparticle composites for printed electronics.

    PubMed

    Männl, U; van den Berg, C; Magunje, B; Härting, M; Britton, D T; Jones, S; van Staden, M J; Scriba, M R

    2014-03-01

    Printed Electronics is a rapidly developing sector in the electronics industry, in which nanostructured materials are playing an increasingly important role. In particular, inks containing dispersions of semiconducting nanoparticles, can form nanocomposite materials with unique electronic properties when cured. In this study we have extended on our previous studies of functional nanoparticle electronic inks, with the development of a solvent-based silicon ink for printed electronics which is compatible with existing silver inks, and with the investigation of other metal nanoparticle based inks. It is shown that both solvent-based and water-based inks can be used for both silver conductors and semiconducting silicon, and that qualitatively there is no difference in the electronic properties of the materials printed with a soluble polymer binder to when an acrylic binder is used. PMID:24521927

  14. Tissue printing on nitrocellulose membrane

    SciTech Connect

    Taylor, R.; Song, Yanru; Pont-Lezica, R.; Lin, Liangshiou; Ye, Zhenghua; Varner, J.E. )

    1989-04-01

    In the 1950's Daoust developed substrate film printing on gelatin and starch films to localize protease, amylase, DNAase and RNAase activities. These procedures were adapted to plant tissues by Yomo and Taylor (1973) and by Jacobsen and Knox (1973). Membranes such as nitrocellulose bind cellular materials from cut tissue surfaces with little lateral diffusion. Thus accurate chemical prints are obtained. When the tissue is pressed firmly onto nitrocellulose a physical impression is obtained which shows the anatomy of the tissue. We have used the tissue-print technique to localize (1) proteins with labeled antibodies, (2) RNA with labeled nucleic acid probes, (3) enzymes by catalytic activity, (4) glycoproteins by fluorescent lectins, (5) lectins by fluorescent sugars, (6) cysteine-rich proteins by dansylated iodoacetamide, (7) ascorbic acid by silver nitrate, (8) soluble fluorescent compounds by direct observation.

  15. Nanoparticle composites for printed electronics

    NASA Astrophysics Data System (ADS)

    Männl, U.; van den Berg, C.; Magunje, B.; Härting, M.; Britton, D. T.; Jones, S.; van Staden, M. J.; Scriba, M. R.

    2014-03-01

    Printed Electronics is a rapidly developing sector in the electronics industry, in which nanostructured materials are playing an increasingly important role. In particular, inks containing dispersions of semiconducting nanoparticles, can form nanocomposite materials with unique electronic properties when cured. In this study we have extended on our previous studies of functional nanoparticle electronic inks, with the development of a solvent-based silicon ink for printed electronics which is compatible with existing silver inks, and with the investigation of other metal nanoparticle based inks. It is shown that both solvent-based and water-based inks can be used for both silver conductors and semiconducting silicon, and that qualitatively there is no difference in the electronic properties of the materials printed with a soluble polymer binder to when an acrylic binder is used.

  16. Fingerprint + Iris = IrisPrint

    NASA Astrophysics Data System (ADS)

    Othman, Asem; Ross, Arun

    2015-05-01

    We consider the problem of generating a biometric image from two different traits. Specifically, we focus on generating an IrisPrint that inherits its structure from a fingerprint image and an iris image. To facilitate this, the continuous phase of the fingerprint image, characterizing its ridge flow, is first extracted. Next, a scheme is developed to extract "minutiae" from an iris image. Finally, an IrisPrint, that resembles a fingerprint, is created by mixing the ridge flow of the fingerprint with the iris minutiae. Preliminary experiments suggest that the new biometric image (i.e., IrisPrint) (a) can potentially be used for authentication by an existing fingerprint matcher, and (b) can potentially conceal and preserve the privacy of the original fingerprint and iris images.

  17. High resolution printing of charge

    SciTech Connect

    Rogers, John; Park, Jang-Ung

    2015-06-16

    Provided are methods of printing a pattern of charge on a substrate surface, such as by electrohydrodynamic (e-jet) printing. The methods relate to providing a nozzle containing a printable fluid, providing a substrate having a substrate surface and generating from the nozzle an ejected printable fluid containing net charge. The ejected printable fluid containing net charge is directed to the substrate surface, wherein the net charge does not substantially degrade and the net charge retained on the substrate surface. Also provided are functional devices made by any of the disclosed methods.

  18. An agent based model of genotype editing

    SciTech Connect

    Rocha, L. M.; Huang, C. F.

    2004-01-01

    This paper presents our investigation on an agent-based model of Genotype Editing. This model is based on several characteristics that are gleaned from the RNA editing system as observed in several organisms. The incorporation of editing mechanisms in an evolutionary agent-based model provides a means for evolving agents with heterogenous post-transcriptional processes. The study of this agent-based genotype-editing model has shed some light into the evolutionary implications of RNA editing as well as established an advantageous evolutionary computation algorithm for machine learning. We expect that our proposed model may both facilitate determining the evolutionary role of RNA editing in biology, and advance the current state of research in agent-based optimization.

  19. Philadelphia Printing and Publishing, 1876-1976

    ERIC Educational Resources Information Center

    Whitehead, Thomas M.

    1976-01-01

    Two Philadelphia printing histories, both reflecting the relationship of printing to publishing, are examined in this article: the manufacture by the publisher of his own product and the development and commercialization of the photomechanical halftone process. (Author)

  20. CADAT Printed-Wiring-Board Designer

    NASA Technical Reports Server (NTRS)

    Brinkerhoff, C. D.

    1982-01-01

    CADAT printed-wiring-board system (PWB) designs printed-circuit and hybrid-circuit boards. It is comprised of four programs: preprocessor, placement program, organizer program, and the router. Component placement and interconnection paths are optimized.

  1. Editing Tips for Technical Publications in the Joint Nuclear Weapons Publication System (JNWPS)

    SciTech Connect

    ALLEN, TARA S.

    2002-12-01

    These editing tips contain helpful suggestions to assist writers who are writing, editing, and publishing technical publications in the JNWPS. The suggestions clarify some of the most common writing problems and requirements of two publications used in the JNWPS: ''DOE-DTRA TP 1-1, Joint Nuclear Weapons Publications System Operating Procedures, Specifications, and Standards, and United States Government Printing Office Style Manual''. Topics include requirements for abbreviations, formats for drafts, layouts of illustrations and tables, appropriate wording for interim changes, guidance for creating a list of effective pages, how to insert and delete pages and paragraphs, referencing other technical publications, use of revision bars, requirements for safety precautions, use of hyphens, and how to place warnings, cautions, and notes. Also included are a writer's checklist, samples of draft title pages, and a section of helpful tips for the writers who use the department's desktop publishing software program, Adobe{reg_sign} FrameMaker{reg_sign}.

  2. Editing and publishing of a medical journal. Success of an unconventional workflow.

    PubMed

    Antony, Sajjeev X; Al-Hussaini, Ala'Aldin

    2004-01-01

    Regional journals often face constraints that threaten their growth, calling for novel coping strategies. This paper outlines the problems and challenges in editing and publishing the SQU Journal for Scientific Research: Medical Sciences, the only peer-reviewed medical journal in the Sultanate of Oman. These included the absence of secretarial support and the consequent need to reduce paperwork, the fact that most papers required substantial editing even after peer review, and the lack of a single workflow for creating documents for the press and the Internet. These challenges were successfully met by creating an unconventional all-electronic workflow that catered to both the print and the online versions. The paper describes this workflow and offers suggestions for journals wishing to streamline theirs. PMID:14968185

  3. Image Editing Via Searching Source Image

    NASA Astrophysics Data System (ADS)

    Yu, Han; Deng, Liang-Jian

    Image editing has important applications by changing the image texture, illumination, target location, etc. As an important application of Poisson equation, Poisson image editing processes images on the gradient domain and has been applied to seamless clone, selection editing, image denoising, etc. In this paper, we present a new application of Poisson image editing, which is based on searching source image. The main feature of the new application is all modifying information comes from the source image. Experimental results show that the proposed application performs well.

  4. Improved pen alignment for bidirectional printing

    NASA Astrophysics Data System (ADS)

    Bernal, Edgar; Allebach, Jan P.; Pizlo, Zygmunt

    2006-01-01

    The quality of the prints produced by an inkjet printer is highly dependent on the characteristics of the dots produced by the inkjet pens. While some literature discusses metrics for the objective evaluation of print quality, few of the efforts have combined automated quality tests with subjective assessment. We develop an algorithm for analyzing printed dots and study the effects of the dot characteristics on the perceived print alignment. We establish the perceptual preferences of human observers via a set of psychophysical experiments.

  5. Flexible substrate for printed wiring

    NASA Technical Reports Server (NTRS)

    Asakura, M.; Yabe, K.; Tanaka, H.; Soda, A.

    1982-01-01

    A very flexible substrate for printed wiring is disclosed which is composed of a blend of phenoxy resin-polyisocyanate-brominated epoxy resin in which the equivalent ration of the functional groups is hydroxyl grouped: isocyanate group: epoxy group = 1:0.2 to 2:0.5 to 3. The product has outstanding solder resistance and is applied to metal without using adhesives.

  6. Printing. Performance Objectives. Intermediate Course.

    ERIC Educational Resources Information Center

    Seivert, Chester

    Several intermediate performance objectives and corresponding criterion measures are listed for each of 13 terminal objectives for an intermediate printing course. The materials were developed for a two-semester (3 hours daily) course with specialized classroom, shop, and practical experiences designed to enable the student to develop proficiency…

  7. The Power of the Print

    ERIC Educational Resources Information Center

    Tam, Jeff

    2010-01-01

    The print has a long-standing tradition of carrying a political message. This can be seen in the works of artists from the German Expressionists, like Kathe Kollwitz and Emil Nolde, to Mexican printmakers like Jose Posada and Leopoldo Mendez. Whether it was during the Mexican Revolution of 1910, the War in Iraq, or the 2008 presidential election,…

  8. Qualification of security printing features

    NASA Astrophysics Data System (ADS)

    Simske, Steven J.; Aronoff, Jason S.; Arnabat, Jordi

    2006-02-01

    This paper describes the statistical and hardware processes involved in qualifying two related printing features for their deployment in product (e.g. document and package) security. The first is a multi-colored tiling feature that can also be combined with microtext to provide additional forms of security protection. The color information is authenticated automatically with a variety of handheld, desktop and production scanners. The microtext is authenticated either following magnification or manually by a field inspector. The second security feature can also be tile-based. It involves the use of two inks that provide the same visual color, but differ in their transparency to infrared (IR) wavelengths. One of the inks is effectively transparent to IR wavelengths, allowing emitted IR light to pass through. The other ink is effectively opaque to IR wavelengths. These inks allow the printing of a seemingly uniform, or spot, color over a (truly) uniform IR emitting ink layer. The combination converts a uniform covert ink and a spot color to a variable data region capable of encoding identification sequences with high density. Also, it allows the extension of variable data printing for security to ostensibly static printed regions, affording greater security protection while meeting branding and marketing specifications.

  9. Conservation of Drawings and Prints

    ERIC Educational Resources Information Center

    King, Antoinette

    1972-01-01

    Some of the basic techniques of preserving and restoring prints and drawings are outlined. Examination, dry cleaning, stain removal, mending, backing removal, and lining are discussed, as well as aspects of the complexity of bleaching, types and nature of some stains and discolorations, and materials of poor quality used by many framers. (Author)

  10. Conservation of Photographic Print Collections.

    ERIC Educational Resources Information Center

    Swan, Alice

    1981-01-01

    Provides specific information on varying photographic materials and processes to aid archivists and curators in preserving photograph collections. Preservation problems related to major types of silver prints on paper (salt, albumen, collodion, gelatin) and to the silver image (oxidation, silver sulfide) are covered. Twenty references are cited.…

  11. Latin American Folk Art Prints

    ERIC Educational Resources Information Center

    Navah, Jan

    2011-01-01

    Latin American customs and colors play an important role as second graders are introduced to multicultural experiences through food, music, dance, art, and craft. In this article, the author describes a printing project inspired by Guatemalan weavings and amate bark paintings. (Contains 2 online resources.)

  12. Design of printed circuit coils

    NASA Technical Reports Server (NTRS)

    Higgins, W. T.

    1969-01-01

    Spiral-like coil is printed with several extra turns which increase the realizable coil inductance. Included are shorting connections which not only short the extra turns, but also short out several turns of the main body. Coil tuning is accomplished by removing the shorts until the desired inductance is obtained.

  13. Projection transparencies from printed material

    NASA Technical Reports Server (NTRS)

    Grunewald, L. S.; Nickerson, T. B.

    1968-01-01

    Method for preparing project transparencies, or view graphs, permits the use of almost any expendable printed material, pictures, charts, or text, in unlimited color or black and white. The method can be accomplished by either of two techniques, with a slight difference in materials.

  14. End of the Printed Line?

    ERIC Educational Resources Information Center

    Wishengrad, Ruth

    1998-01-01

    Considers whether laptop and handheld computers will be able to replace printed textbooks in classrooms. Topics cover benefits of classroom computers, including the need for computer literacy; computer costs, including service contracts, theft, and the need for staff development; the problems with dated textbooks; publishers' concerns; and…

  15. All-printed paper memory.

    PubMed

    Lien, Der-Hsien; Kao, Zhen-Kai; Huang, Teng-Han; Liao, Ying-Chih; Lee, Si-Chen; He, Jr-Hau

    2014-08-26

    We report the memory device on paper by means of an all-printing approach. Using a sequence of inkjet and screen-printing techniques, a simple metal–insulator–metal device structure is fabricated on paper as a resistive random access memory with a potential to reach gigabyte capacities on an A4 paper. The printed-paper-based memory devices (PPMDs) exhibit reproducible switching endurance, reliable retention, tunable memory window, and the capability to operate under extreme bending conditions. In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease of data handling, which are not achievable for regular silicon-based electronic devices. We envision that the PPMDs manufactured by this cost-effective and time-efficient all-printing approach would be a key electronic component to fully activate a paper-based circuit and can be directly implemented in medical biosensors, multifunctional devices, and self-powered systems. PMID:25019420

  16. Print Referencing during Read-Alouds: A Technique for Increasing Emergent Readers' Print Knowledge

    ERIC Educational Resources Information Center

    Zucker, Tricia A.; Ward, Allison E.; Justice, Laura M.

    2009-01-01

    This article describes how educators can readily increase emergent readers' print knowledge by using an evidence-based technique called print referencing to ensure that classroom read-alouds include not only a comprehension focus, but also a complementary focus on print. Print referencing was recently described in "The Reading Teacher" as an…

  17. 48 CFR 970.5208-1 - Printing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and Operating Contracts 970.5208-1 Printing. As prescribed in 970.0808-3, insert the following clause... such printing being disallowed. (d) The Contractor shall include the substance of this clause in all... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Printing....

  18. 48 CFR 970.5208-1 - Printing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and Operating Contracts 970.5208-1 Printing. As prescribed in 970.0808-3, insert the following clause... such printing being disallowed. (d) The Contractor shall include the substance of this clause in all... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Printing....

  19. 48 CFR 970.5208-1 - Printing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and Operating Contracts 970.5208-1 Printing. As prescribed in 970.0808-3, insert the following clause... such printing being disallowed. (d) The Contractor shall include the substance of this clause in all... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Printing....

  20. 48 CFR 970.5208-1 - Printing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and Operating Contracts 970.5208-1 Printing. As prescribed in 970.0808-3, insert the following clause... such printing being disallowed. (d) The Contractor shall include the substance of this clause in all... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Printing....

  1. Corporate Web Sites in Traditional Print Advertisements.

    ERIC Educational Resources Information Center

    Pardun, Carol J.; Lamb, Larry

    1999-01-01

    Describes the Web presence in print advertisements to determine how marketers are creating bridges between traditional advertising and the Internet. Content analysis showed Web addresses in print ads; categories of advertisers most likely to link print ads with Web sites; and whether the Web site attempts to develop a database of potential…

  2. Fuel Cell Handbook, Fourth Edition

    SciTech Connect

    Stauffer, D.B; Hirschenhofer, J.H.; Klett, M.G.; Engleman, R.R.

    1998-11-01

    Robust progress has been made in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in January 1994. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultra high efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 6 describe the four major fuel cell types and their performance based on cell operating conditions. The section on polymer electrolyte membrane fuel cells has been added to reflect their emergence as a significant fuel cell technology. Phosphoric acid, molten carbonate, and solid oxide fuel cell technology description sections have been updated from the previous edition. New information indicates that manufacturers have stayed with proven cell designs, focusing instead on advancing the system surrounding the fuel cell to lower life cycle costs. Section 7, Fuel Cell Systems, has been significantly revised to characterize near-term and next-generation fuel cell power plant systems at a conceptual level of detail. Section 8 provides examples of practical fuel cell system calculations. A list of fuel cell URLs is included in the Appendix. A new index assists the reader in locating specific information quickly.

  3. Solar heating and cooling of residential buildings: design of systems, 1980 edition

    SciTech Connect

    1980-09-01

    This manual was prepared primarily for use in conducting a practical training course on the design of solar heating and cooling systems for residential and small office buildings, but may also be useful as a general reference text. The content level is appropriate for persons with different and varied backgrounds, although it is assumed that readers possess a basic understanding of heating, ventilating, and air-conditioning systems of conventional (non-solar) types. This edition is a revision of the manual with the same title, first printed and distributed by the US Government Printing Office in October 1977. The manual has been reorganized, new material has been added, and outdated information has been deleted. Only active solar systems are described. Liquid and air-heating solar systems for combined space and service water heating or service water heating are included. Furthermore, only systems with proven experience are discussed to any extent.

  4. Pediatric surgical pathology. Second edition

    SciTech Connect

    Dehner, L.P.

    1987-01-01

    The edition provides view of congenital, hereditary, infectious, and inflammatory neoplastic diseases occurring during the first two decades of life, with special reference to clinical, laboratory, and roentgenographic features. Material includes observations from some of the major national studies on Wilms' tumor and rhabdomyosarcomas, the new classification of pediatric malignant lymphomas, a discussion of the role of immunocytochemistry as it applies to the diagnosis of childhood infections and neoplasms, an examination of graft-versus-host disease in the liver and intestinal tract and more.

  5. NASA Pocket Statistics: 1997 Edition

    NASA Technical Reports Server (NTRS)

    1997-01-01

    POCKET STATISTICS is published by the NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA). Included in each edition is Administrative and Organizational information, summaries of Space Flight Activity including the NASA Major Launch Record, Aeronautics and Space Transportation and NASA Procurement, Financial and Workforce data. The NASA Major Launch Record includes all launches of Scout class and larger vehicles. Vehicle and spacecraft development flights are also included in the Major Launch Record. Shuttle missions are counted as one launch and one payload, where free flying payloads are not involved. All Satellites deployed from the cargo bay of the Shuttle and placed in a separate orbit or trajectory are counted as an additional payload.

  6. The Technology of Human Editing (The Friendly Editor).

    ERIC Educational Resources Information Center

    Bush, Don

    1992-01-01

    Contrasts robotic editing with human editing (discussing descriptive grammar, periodic sentences, theme-rheme concept, right-branching, zeugma, and Irish bulls). Maintains that, for any editing that requires thinking, humans are always superior. (SR)

  7. Grey Component Replacement In Newspaper Printing

    NASA Astrophysics Data System (ADS)

    Juhola, Helene

    1990-06-01

    The possibilities to achieve a good four-colour print quality are much more limited in newspaper printing than in heat-set or gravure web printing. Nevertheless, the percentage of four-colour printing and, consequently, the quality requirements continue to grow in newspapers. One way of making the printer's work easier in the colour separation process is the socalled Grey Component Replacement (GCR). This technology has been available with digital scanners for several years. Our laboratory has also studied its applicability, especially in newspaper printing, on different occasions.

  8. The zebrafish genome editing toolkit.

    PubMed

    Ata, H; Clark, K J; Ekker, S C

    2016-01-01

    Zebrafish (Danio rerio) is a unique model organism at the functional intersection between a high fecundity and conserved vertebrate physiology while being amenable to a multitude of genome editing techniques. The genome engineering field has experienced an unprecedented rate of growth in the recent years since the introduction of designer endonucleases, such as zinc finger nucleases, transcription activator-like effector nucleases, and clustered regularly interspaced short palindromic repeats-Cas9 systems. With the ever-evolving toolset available to the scientific community, the important question one should ask is not simply how to make a mutant line, but rather how best to do so. For this purpose, understanding the toolset is just one end of the equation; understanding how DNA is repaired once double-strand breaks are induced by designer endonucleases, as well as understanding proper fish handling and line maintenance techniques, are also essential to rapidly edit the zebrafish genome. This chapter is outlined to provide a bird's-eye view on each of these three components. The goal of this chapter is to facilitate the adoption of the zebrafish as a model to study human genetic disease and to rapidly analyze the function of the vertebrate genome. PMID:27443924

  9. Mod silver metallization: Screen printing and ink-jet printing

    NASA Technical Reports Server (NTRS)

    Vest, R. W.; Vest, G. M.

    1985-01-01

    Basic material efforts have proven to be very successful. Adherent and conductive films were achieved. A silver neodecanoate/bismuth 2-ethylhexanoate mixture has given the best results in both single and double layer applications. Another effort is continuing to examine the feasibility of applying metallo-organic deposition films by use of an ink jet printer. Direct line writing would result in a saving of process time and materials. So far, some well defined lines have been printed.

  10. Mod silver metallization: Screen printing and ink-jet printing

    NASA Astrophysics Data System (ADS)

    Vest, R. W.; Vest, G. M.

    1985-06-01

    Basic material efforts have proven to be very successful. Adherent and conductive films were achieved. A silver neodecanoate/bismuth 2-ethylhexanoate mixture has given the best results in both single and double layer applications. Another effort is continuing to examine the feasibility of applying metallo-organic deposition films by use of an ink jet printer. Direct line writing would result in a saving of process time and materials. So far, some well defined lines have been printed.

  11. Automatic data editing: a brief introduction

    SciTech Connect

    Liepins, G.E.

    1982-01-01

    This paper briefly discusses the automatic data editing process: (1) check the data records for consistency, (2) analyze the inconsistent records to determine the inconsistent variables. It is stated that the application of automatic data editing is broad, and two specific examples are cited. One example, that of a vehicle maintenance data base is used to illustrate the process.

  12. Managing the Incompetent Teacher. Second Edition.

    ERIC Educational Resources Information Center

    Bridges, Edwin M.

    Featuring the same practical guidelines for ridding schools of incompetent teachers as the 1984 edition, this new edition incorporates substantially revised material on three topics: criteria and information sources for evaluating teaching effectiveness, remediation procedures, and grounds for dismissal. The book presents an eight-step systematic,…

  13. Editing Technical Proposals (The Friendly Editor).

    ERIC Educational Resources Information Center

    Bush, Don

    1994-01-01

    Makes suggestions for editing technical proposals. Discusses the marketeers, the hierarchy of hype, how to save days, managing story boards, expediting a laborious process, teaching engineers to write, writing incrementally, the art group, and the editing task. Argues that the best proposals come from starting to write early. (SR)

  14. Sex Differences in Cognitive Abilities. Fourth Edition

    ERIC Educational Resources Information Center

    Halpern, Diane F.

    2011-01-01

    The fourth edition of "Sex Differences in Cognitive Abilities" critically examines the breadth of research on this complex and controversial topic, with the principal aim of helping the reader to understand where sex differences are found--and where they are not. Since the publication of the third edition, there have been many exciting and…

  15. Web Thermo Tables (WTT) - Professional Edition

    National Institute of Standards and Technology Data Gateway

    SRD 203 NIST/TRC Web Thermo Tables (WTT) - Professional Edition (Online Subscription)   WTT - Professional Edition, a Web version of the TRC Thermodynamic Tables, represents a complete collection of critically evaluated thermodynamic property data primarily for pure organic compounds. As of Nov. 2011, WTT contains information on 23999 compounds.

  16. Web Thermo Tables (WTT) - Lite Edition

    National Institute of Standards and Technology Data Gateway

    SRD 202 NIST/TRC Web Thermo Tables (WTT) - Lite Edition (Online Subscription)   WTT - Lite Edition, a Web version of the TRC Thermodynamic Tables, represents a collection of critically evaluated thermodynamic property data for 150 commonly-used (primarily organic) pure compounds.

  17. Novel modes of RNA editing in mitochondria.

    PubMed

    Moreira, Sandrine; Valach, Matus; Aoulad-Aissa, Mohamed; Otto, Christian; Burger, Gertraud

    2016-06-01

    Gene structure and expression in diplonemid mitochondria are unparalleled. Genes are fragmented in pieces (modules) that are separately transcribed, followed by the joining of module transcripts to contiguous RNAs. Some instances of unique uridine insertion RNA editing at module boundaries were noted, but the extent and potential occurrence of other editing types remained unknown. Comparative analysis of deep transcriptome and genome data from Diplonema papillatum mitochondria reveals ∼220 post-transcriptional insertions of uridines, but no insertions of other nucleotides nor deletions. In addition, we detect in total 114 substitutions of cytosine by uridine and adenosine by inosine, amassed into unusually compact clusters. Inosines in transcripts were confirmed experimentally. This is the first report of adenosine-to-inosine editing of mRNAs and ribosomal RNAs in mitochondria. In mRNAs, editing causes mostly amino-acid additions and non-synonymous substitutions; in ribosomal RNAs, it permits formation of canonical secondary structures. Two extensively edited transcripts were compared across four diplonemids. The pattern of uridine-insertion editing is strictly conserved, whereas substitution editing has diverged dramatically, but still rendering diplonemid proteins more similar to other eukaryotic orthologs. We posit that RNA editing not only compensates but also sustains, or even accelerates, ultra-rapid evolution of genome structure and sequence in diplonemid mitochondria. PMID:27001515

  18. Michigan Library Statistical Report. 1997 Edition.

    ERIC Educational Resources Information Center

    Michigan Library, Lansing.

    This 1997 edition focuses on statistical data supplied by Michigan public libraries, public library cooperatives, and those public libraries which serve as regional or subregional outlets for blind and physically handicapped patrons. Statistics on academic libraries are also presented in this edition, and summary statistics for prior fiscal years…

  19. New Edition of Chinese Biochemistry Textbook.

    ERIC Educational Resources Information Center

    Jian-Chuan, Ma

    1988-01-01

    Discusses the four previous editions of the biochemistry medical textbooks called the "Nationwide Unified Textbooks." Notes the new (1989) edition is much smaller, is organized differently, has new material, has a reorganized Dynamic Biochemistry core, and shows great importance to clinical biochemistry. (MVL)

  20. Teaching Strategies for Ethnic Studies. Fifth Edition.

    ERIC Educational Resources Information Center

    Banks, James A.

    A major goal of this fifth edition is to help present and future teachers acquire the knowledge, concepts, strategies, and resources needed to integrate information about ethnic groups into the mainstream curriculum. This edition incorporates new terms and concepts that are emerging in the field of multicultural education. Information on ethnic…

  1. Handbook of Reference Sources. Third Edition.

    ERIC Educational Resources Information Center

    Nichols, Margaret Irby

    This third edition of popular and useful reference works, which emphasizes the needs of small libraries, contains 975 annotated entries and lists 201 additional titles (most with bibliographic and order information) in the annotations, representing an expansion of 30 percent over the second edition. The appendix lists 116 basic or core reference…

  2. Teaching Visually Impaired Children. 3rd Edition

    ERIC Educational Resources Information Center

    Bishop, Virginia E.

    2004-01-01

    In this exceptional new third edition, the author has retained much of the practical "how to" approach of the previous editions, but adds depth in two dimensions: learning theory and the educational process. This book is "so comprehensive in scope and complete in detail that it would be the most likely recommended" (from the foreword by Dr.…

  3. Exposure Factors Handbook 2011 Edition (Final)

    EPA Science Inventory

    edition_cover.jpg" vspace = "5" hspace="5" align="right" border="2" alt="Cover of the Exposure Factors Handbook: 2011 Edition"> The mission of National Center for Environmental Assessment (NCEA) of EPA's ...

  4. Applications of genome editing in insects

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Insect genome editing was first reported 1991 in Drosophila melanogaster but the technology used was not portable to other species. Not until the recent development of facile, engineered DNA endonuclease systems has gene editing become widely available to insect scientists. Most applications in inse...

  5. Novel modes of RNA editing in mitochondria

    PubMed Central

    Moreira, Sandrine; Valach, Matus; Aoulad-Aissa, Mohamed; Otto, Christian; Burger, Gertraud

    2016-01-01

    Gene structure and expression in diplonemid mitochondria are unparalleled. Genes are fragmented in pieces (modules) that are separately transcribed, followed by the joining of module transcripts to contiguous RNAs. Some instances of unique uridine insertion RNA editing at module boundaries were noted, but the extent and potential occurrence of other editing types remained unknown. Comparative analysis of deep transcriptome and genome data from Diplonema papillatum mitochondria reveals ∼220 post-transcriptional insertions of uridines, but no insertions of other nucleotides nor deletions. In addition, we detect in total 114 substitutions of cytosine by uridine and adenosine by inosine, amassed into unusually compact clusters. Inosines in transcripts were confirmed experimentally. This is the first report of adenosine-to-inosine editing of mRNAs and ribosomal RNAs in mitochondria. In mRNAs, editing causes mostly amino-acid additions and non-synonymous substitutions; in ribosomal RNAs, it permits formation of canonical secondary structures. Two extensively edited transcripts were compared across four diplonemids. The pattern of uridine-insertion editing is strictly conserved, whereas substitution editing has diverged dramatically, but still rendering diplonemid proteins more similar to other eukaryotic orthologs. We posit that RNA editing not only compensates but also sustains, or even accelerates, ultra-rapid evolution of genome structure and sequence in diplonemid mitochondria. PMID:27001515

  6. Accounting for Independent Schools. Second Edition.

    ERIC Educational Resources Information Center

    National Association of Independent Schools, Boston, MA.

    This is a thoroughly revised edition of the 1969 publication, "Accounting for Independent Schools," a guide that attempted to codify basic accounting principles and practices for specific application to independent schools. The focus of the second edition is more on refining practices than on initiating them, and more on extending the managerial…

  7. Non-GMO genetically edited crop plants.

    PubMed

    Kanchiswamy, Chidananda Nagamangala; Malnoy, Mickael; Velasco, Riccardo; Kim, Jin-Soo; Viola, Roberto

    2015-09-01

    Direct delivery of purified Cas9 protein with guide RNA into plant cells, as opposed to plasmid-mediated delivery, displays high efficiency and reduced off-target effects. Following regeneration from edited cells, the ensuing plant is also likely to bypass genetically modified organism (GMO) legislation as the genome editing complex is degraded in the recipient cells. PMID:25978870

  8. America's Children and the Environment, Third Edition

    EPA Science Inventory

    America's Children and the Environment is the U.S. EPA's report of children's environmental health indicators. Two editions of the report have been published, in 2000 and 2003, and a website is maintained with updated values for the indicators. The new Third Edition of America'...

  9. AV Instruction Media and Methods; Third Edition.

    ERIC Educational Resources Information Center

    Brown, James W., Ed.; And Others

    In addition to updating material covered in the second edition and providing more illustrative material, this edition attempts to offer a systematic approach to the integration of instructional aids into the curriculum. It discusses the use of significant new developments in instructional technology-multimedia packages or kits, programed…

  10. Exploring the RNA editing potential of RNA-Seq data by ExpEdit.

    PubMed

    D'Antonio, Mattia; Picardi, Ernesto; Castrignanò, Tiziana; D'Erchia, Anna Maria; Pesole, Graziano

    2015-01-01

    Revealing the impact of A-to-I RNA editing in RNA-Seq experiments is relevant in humans because RNA editing can influence gene expression. In addition, its deregulation has been linked to a variety of human diseases. Exploiting the RNA editing potential in complete RNA-Seq datasets, however, is a challenging task. Indeed, no dedicated software is available, and sometimes deep computational skills and appropriate hardware resources are required. To explore the impact of known RNA editing events in massive transcriptome sequencing experiments, we developed the ExpEdit web service application. In the present work, we provide an overview of ExpEdit as well as methodologies to investigate known RNA editing in human RNA-Seq datasets. PMID:25577388

  11. New Format for AGU Print Journals

    NASA Astrophysics Data System (ADS)

    Cook, Bill

    2010-08-01

    AGU has adopted a new print format for Journal of Geophysical Research, Water Resources Research, Geophysical Research Letters, and Reviews of Geophysics starting with the July 2010 issues. In the new format, pages are condensed and rotated so that two pages of journal text fit side by side on one printed page. Why has AGU chosen to go this route? The rising costs of print, the decline of print subscriptions, and the need to conserve resources used in printing have led us to consider many options in delivering our journals to our customers. The most effective version, of course, is the electronic version, but many customers still require print copies for various purposes. As long as there is a demand for print, we will attempt to meet that demand and to explore all possibilities for reducing the costs of the format.

  12. Ebola virus RNA editing depends on the primary editing site sequence and an upstream secondary structure.

    PubMed

    Mehedi, Masfique; Hoenen, Thomas; Robertson, Shelly; Ricklefs, Stacy; Dolan, Michael A; Taylor, Travis; Falzarano, Darryl; Ebihara, Hideki; Porcella, Stephen F; Feldmann, Heinz

    2013-01-01

    Ebolavirus (EBOV), the causative agent of a severe hemorrhagic fever and a biosafety level 4 pathogen, increases its genome coding capacity by producing multiple transcripts encoding for structural and nonstructural glycoproteins from a single gene. This is achieved through RNA editing, during which non-template adenosine residues are incorporated into the EBOV mRNAs at an editing site encoding for 7 adenosine residues. However, the mechanism of EBOV RNA editing is currently not understood. In this study, we report for the first time that minigenomes containing the glycoprotein gene editing site can undergo RNA editing, thereby eliminating the requirement for a biosafety level 4 laboratory to study EBOV RNA editing. Using a newly developed dual-reporter minigenome, we have characterized the mechanism of EBOV RNA editing, and have identified cis-acting sequences that are required for editing, located between 9 nt upstream and 9 nt downstream of the editing site. Moreover, we show that a secondary structure in the upstream cis-acting sequence plays an important role in RNA editing. EBOV RNA editing is glycoprotein gene-specific, as a stretch encoding for 7 adenosine residues located in the viral polymerase gene did not serve as an editing site, most likely due to an absence of the necessary cis-acting sequences. Finally, the EBOV protein VP30 was identified as a trans-acting factor for RNA editing, constituting a novel function for this protein. Overall, our results provide novel insights into the RNA editing mechanism of EBOV, further understanding of which might result in novel intervention strategies against this viral pathogen. PMID:24146620

  13. 3D-Printed Microfluidics.

    PubMed

    Au, Anthony K; Huynh, Wilson; Horowitz, Lisa F; Folch, Albert

    2016-03-14

    The advent of soft lithography allowed for an unprecedented expansion in the field of microfluidics. However, the vast majority of PDMS microfluidic devices are still made with extensive manual labor, are tethered to bulky control systems, and have cumbersome user interfaces, which all render commercialization difficult. On the other hand, 3D printing has begun to embrace the range of sizes and materials that appeal to the developers of microfluidic devices. Prior to fabrication, a design is digitally built as a detailed 3D CAD file. The design can be assembled in modules by remotely collaborating teams, and its mechanical and fluidic behavior can be simulated using finite-element modeling. As structures are created by adding materials without the need for etching or dissolution, processing is environmentally friendly and economically efficient. We predict that in the next few years, 3D printing will replace most PDMS and plastic molding techniques in academia. PMID:26854878

  14. Printed sectoral horn power combiner

    NASA Astrophysics Data System (ADS)

    Boccia, Luigi; Emanuele, Antonio; Shamsafar, Alireza; Arnieri, Emilio; Amendola, Giandomenico

    2015-02-01

    In this work, it is presented a new configuration of planar power combiner/divider based on an H-plane sectoral horn antenna. This component is proposed to realise the basic building blocks of printed power-combining amplifiers. It will be shown how the sectoral horn elements can be implemented on substrate integrated waveguide and multilayer printed circuit board technologies, thus obtaining a high integration level. In the following, the design procedure will be described reporting an example of an 11-stage power divider/combiner in C-band. A prototype has been fabricated, and the measured results compared with the numerical model. Experimental results are in good agreement with theoretical expectations showing a single-stage efficiency of about 90% and a bandwidth of 40%.

  15. Heat sinking for printed circuitry

    DOEpatents

    Wilson, S.K.; Richardson, G.; Pinkerton, A.L.

    1984-09-11

    A flat pak or other solid-state device mounted on a printed circuit board directly over a hole extends therethrough so that the bottom of the pak or device extends beyond the bottom of the circuit board. A heat sink disposed beneath the circuit board contacts the bottom of the pak or device and provides direct heat sinking thereto. Pressure may be applied to the top of the pak or device to assure good mechanical and thermal contact with the heat sink.

  16. Fuel Cell Handbook, Fifth Edition

    SciTech Connect

    Energy and Environmental Solutions

    2000-10-31

    Progress continues in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in November 1998. Uppermost, polymer electrolyte fuel cells, molten carbonate fuel cells, and solid oxide fuel cells have been demonstrated at commercial size in power plants. The previously demonstrated phosphoric acid fuel cells have entered the marketplace with more than 220 power plants delivered. Highlighting this commercial entry, the phosphoric acid power plant fleet has demonstrated 95+% availability and several units have passed 40,000 hours of operation. One unit has operated over 49,000 hours. Early expectations of very low emissions and relatively high efficiencies have been met in power plants with each type of fuel cell. Fuel flexibility has been demonstrated using natural gas, propane, landfill gas, anaerobic digester gas, military logistic fuels, and coal gas, greatly expanding market opportunities. Transportation markets worldwide have shown remarkable interest in fuel cells; nearly every major vehicle manufacturer in the U.S., Europe, and the Far East is supporting development. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultrahigh efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 8 describe the six major fuel cell types and their performance based on cell operating conditions. Alkaline and intermediate solid state fuel cells were added to this edition of the Handbook. New information indicates that manufacturers have stayed

  17. 3D Printed Bionic Ears

    PubMed Central

    Mannoor, Manu S.; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A.; Soboyejo, Winston O.; Verma, Naveen; Gracias, David H.; McAlpine, Michael C.

    2013-01-01

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the precise anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing. PMID:23635097

  18. 3D printed bionic ears.

    PubMed

    Mannoor, Manu S; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A; Soboyejo, Winston O; Verma, Naveen; Gracias, David H; McAlpine, Michael C

    2013-06-12

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing. PMID:23635097

  19. Effects of Print Publication Lag in Dual Format Journals on Scientometric Indicators

    PubMed Central

    Heneberg, Petr

    2013-01-01

    Background Publication lag between manuscript submission and its final publication is considered as an important factor affecting the decision to submit, the timeliness of presented data, and the scientometric measures of the particular journal. Dual-format peer-reviewed journals (publishing both print and online editions of their content) adopted a broadly accepted strategy to shorten the publication lag: to publish the accepted manuscripts online ahead of their print editions, which may follow days, but also years later. Effects of this widespread habit on the immediacy index (average number of times an article is cited in the year it is published) calculation were never analyzed. Methodology/Principal Findings Scopus database (which contains nearly up-to-date documents in press, but does not reveal citations by these documents until they are finalized) was searched for the journals with the highest total counts of articles in press, or highest counts of articles in press appearing online in 2010–2011. Number of citations received by the articles in press available online was found to be nearly equal to citations received within the year when the document was assigned to a journal issue. Thus, online publication of in press articles affects severely the calculation of immediacy index of their source titles, and disadvantages online-only and print-only journals when evaluating them according to the immediacy index and probably also according to the impact factor and similar measures. Conclusions/Significance Caution should be taken when evaluating dual-format journals supporting long publication lag. Further research should answer the question, on whether the immediacy index should be replaced by an indicator based on the date of first publication (online or in print, whichever comes first) to eliminate the problems analyzed in this report. Information value of immediacy index is further questioned by very high ratio of authors’ self-citations among the

  20. A novel XML-based document format with printing quality for web publishing

    NASA Astrophysics Data System (ADS)

    Qiu, Ruiheng; Tang, Zhi; Gao, Liangcai; Yu, Yinyan

    2010-02-01

    Although many XML-based document formats are available for printing or publishing on the Internet, none of them is well designed to support both high quality printing and web publishing. Therefore, we propose a novel XML-based document format for web publishing, called CEBX, in this paper. The proposed format is a fixed-layout document supporting high quality printing, which has optimized document content organization, physical structure and protection scheme to support web publishing. There are four noteworthy features of CEBX documents: (1) CEBX provides original fixed layout by graphic units for printing quality. (2) The content in CEBX document can be reflowed to fit the display device basing on the content blocks and additional fluid information. (3) XML Document Archiving model (XDA), the packaging model used in CEBX, supports document linearization and incremental edit well. (4) By introducing a segment-based content protection scheme into CEBX, some part of a document can be previewed directly while the remaining part is protected effectively such that readers only need to purchase partial content of a book that they are interested in. This will be very helpful to document distribution and support flexible business models such as try-beforebuy, on-demand reading, superdistribution, etc.

  1. Image editing with spatiograms transfer.

    PubMed

    Papadakis, Nicolas; Bugeau, Aurélie; Caselles, Vicent

    2012-05-01

    Histogram equalization is a well-known method for image contrast enhancement. Nevertheless, as histograms do not include any information on the spatial repartition of colors, their application to local image editing problems remains limited. To cope with this lack of spatial information, spatiograms have been recently proposed for tracking purposes. A spatiogram is an image descriptor that combines a histogram with the mean and the variance of the position of each color. In this paper, we address the problem of local retouching of images by proposing a variational method for spatiogram transfer. More precisely, a reference spatiogram is used to modify the color value of a given region of interest of the processed image. Experiments on shadow removal and inpainting demonstrate the strength of the proposed approach. PMID:22249712

  2. A resolution to authorize the printing of a revised edition of the Senate Rules and Manual.

    THOMAS, 113th Congress

    Sen. Schumer, Charles E. [D-NY

    2014-07-31

    07/31/2014 Submitted in the Senate, considered, and agreed to without amendment by Unanimous Consent. (consideration: CR 8/1/2014 S5315; text as passed Senate: CR S5235) (All Actions) Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

  3. LifePrints 3: ESL for Adults. Teacher's Edition; Teacher's Resource File; [Student Book].

    ERIC Educational Resources Information Center

    Newman, Christy M.; And Others

    Materials for adult English-as-a-Second-Language (ESL) instruction are presented. They are designed to enable adult ESL learners with limited oral and/or written competence in English to handle most everyday survival, social, family, and job-related situations independently, using oral and written English. Stage 3 materials, presented here, are…

  4. A resolution to authorize the printing of a revised edition of the Senate Rules and Manual.

    THOMAS, 112th Congress

    Sen. Schumer, Charles E. [D-NY

    2011-11-09

    11/09/2011 Submitted in the Senate, considered, and agreed to without amendment by Unanimous Consent. (consideration: CR S7304; text as passed Senate: CR S7304; text of measure as introduced: CR S7302) (All Actions) Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

  5. Law of Mass Communications: Freedom and Control of Print and Broadcast Media. Third Edition.

    ERIC Educational Resources Information Center

    Nelson, Harold L.; Teeter, Dwight L., Jr.

    This book is divided into three major sections: principles and development of freedom of expression, rights in conflict with free expression, and communications law and the public interest. Specific areas covered in the two chapters of the first section are freedom and control and a historical background of freedom of expression. The second…

  6. Life Prints 2: ESL for Adults. Teacher's Edition; Teacher's Resource File; [Student Book].

    ERIC Educational Resources Information Center

    Newman, Christy M.; And Others

    Materials for adult English-as-a-Second-Language (ESL) instruction are presented. They are designed to enable adult ESL learners with limited oral and/or written competence in English to handle most everyday survival, social, family, and job-related situations independently, using oral and written English. Stage 2 materials, presented here, are…

  7. Directorio Chicano, Third Edition. A Resource Listing of Chicano Media: Print & Film.

    ERIC Educational Resources Information Center

    Southwest Network, Hayward, CA.

    Based on data from a questionnaire mailed to about 235 identifiable Chicano media sources from February through May 1976, this directory presents the name and address of each media group; name of organization, if applicable; how long they have been in existence; their publication's focus, language and frequency; and subscription rates. The 190…

  8. Biosurface engineering through ink jet printing.

    PubMed

    Khan, Mohidus Samad; Fon, Deniece; Li, Xu; Tian, Junfei; Forsythe, John; Garnier, Gil; Shen, Wei

    2010-02-01

    The feasibility of thermal ink jet printing as a robust process for biosurface engineering was demonstrated. The strategy investigated was to reconstruct a commercial printer and take advantage of its colour management interface. High printing resolution was achieved by formulating bio-inks of viscosity and surface tension similar to those of commercial inks. Protein and enzyme denaturation during thermal ink jet printing was shown to be insignificant. This is because the time spent by the biomolecules in the heating zone of the printer is negligible; in addition, the air and substrate of high heat capacity absorb any residual heat from the droplet. Gradients of trophic/tropic factors can serve as driving force for cell growth or migration for tissue regeneration. Concentration gradients of proteins were printed on scaffolds to show the capability of ink jet printing. The printed proteins did not desorb upon prolonged immersion in aqueous solutions, thus allowing printed scaffold to be used under in vitro and in vivo conditions. Our group portrait was ink jet printed with a protein on paper, illustrating that complex biopatterns can be printed on large area. Finally, patterns of enzymes were ink jet printed within the detection and reaction zones of a paper diagnostic. PMID:19879112

  9. Watermarking and copyright labeling of printed images

    NASA Astrophysics Data System (ADS)

    Hel-Or, Hagit Z.

    2001-07-01

    Digital watermarking is a labeling technique for digital images which embeds a code into the digital data so the data are marked. Watermarking techniques previously developed deal with on-line digital data. These techniques have been developed to withstand digital attacks such as image processing, image compression and geometric transformations. However, one must also consider the readily available attack of printing and scanning. The available watermarking techniques are not reliable under printing and scanning. In fact, one must consider the availability of watermarks for printed images as well as for digital images. An important issue is to intercept and prevent forgery in printed material such as currency notes, back checks, etc. and to track and validate sensitive and secrete printed material. Watermarking in such printed material can be used not only for verification of ownership but as an indicator of date and type of transaction or date and source of the printed data. In this work we propose a method of embedding watermarks in printed images by inherently taking advantage of the printing process. The method is visually unobtrusive to the printed image, the watermark is easily extracted and is robust under reconstruction errors. The decoding algorithm is automatic given the watermarked image.

  10. Evolution of RNA editing in trypanosome mitochondria

    PubMed Central

    Simpson, Larry; Thiemann, Otavio H.; Savill, Nicholas J.; Alfonzo, Juan D.; Maslov, D. A.

    2000-01-01

    Two different RNA editing systems have been described in the kinetoplast-mitochondrion of trypanosomatid protists. The first involves the precise insertion and deletion of U residues mostly within the coding regions of maxicircle-encoded mRNAs to produce open reading frames. This editing is mediated by short overlapping complementary guide RNAs encoded in both the maxicircle and the minicircle molecules and involves a series of enzymatic cleavage-ligation steps. The second editing system is a C34 to U34 modification in the anticodon of the imported tRNATrp, thereby permitting the decoding of the UGA stop codon as tryptophan. U-insertion editing probably originated in an ancestor of the kinetoplastid lineage and appears to have evolved in some cases by the replacement of the original pan-edited cryptogene with a partially edited cDNA. The driving force for the evolutionary fixation of these retroposition events was postulated to be the stochastic loss of entire minicircle sequence classes and their encoded guide RNAs upon segregation of the single kinetoplast DNA network into daughter cells at cell division. A large plasticity in the relative abundance of minicircle sequence classes has been observed during cell culture in the laboratory. Computer simulations provide theoretical evidence for this plasticity if a random distribution and segregation model of minicircles is assumed. The possible evolutionary relationship of the C to U and U-insertion editing systems is discussed. PMID:10860961

  11. Changing genetic information through RNA editing

    NASA Technical Reports Server (NTRS)

    Maas, S.; Rich, A.

    2000-01-01

    RNA editing, the post-transcriptional alteration of a gene-encoded sequence, is a widespread phenomenon in eukaryotes. As a consequence of RNA editing, functionally distinct proteins can be produced from a single gene. The molecular mechanisms involved include single or multiple base insertions or deletions as well as base substitutions. In mammals, one type of substitutional RNA editing, characterized by site-specific base-modification, was shown to modulate important physiological processes. The underlying reaction mechanism of substitutional RNA editing involves hydrolytic deamination of cytosine or adenosine bases to uracil or inosine, respectively. Protein factors have been characterized that are able to induce RNA editing in vitro. A supergene family of RNA-dependent deaminases has emerged with the recent addition of adenosine deaminases specific for tRNA. Here we review the developments that have substantially increased our understanding of base-modification RNA editing over the past few years, with an emphasis on mechanistic differences, evolutionary aspects and the first insights into the regulation of editing activity.

  12. Reporting on Climate Change: Understanding the Science, Third Edition

    SciTech Connect

    Ward, Morris A.; Parker, Elissa A.

    2003-10-10

    The Environmental Law Institute, the grantee, in the final quarter of operation under Department of Energy Grant DE-FG02-02ER63414, successfully completed the following tasks associated with the grant: (1) published ''Reporting on Climate Change: Understanding the Science'', the third edition of this resource intended primarily to help print and broadcast journalists report more effectively on scientific aspects of global climate change; (2) distributed the reporters guide directly to roughly 500 journalists and journalism educators participating in the annual meeting of the Society of Environmental Journalists in New Orleans, La.; (3) distributed the reporters guide to an additional 1,500 journalists and journalism educators by mail; (4) provided journalism educators bulk copies, upon specific request, for their use in upper-level science journalism and environmental journalism classes; (5) conducted outreach to science editors and environmental reporters on availability and use of the reporter's guide; (6) completed financial reporting associated with the reporter's guide grant. ELI has provided requested bulk numbers of copies of ''Reporting on Climate Change: Understanding the Science'' to the DOE Project Officer, David C. Bader, Ph.D., and to Jeffrey Amthor, Ph.D., in the Office of Science. ELI currently has a remaining inventory of roughly 500 copies from the original printing of more than 3,000 copies of the guide. These copies are used for responding to continuing requests from journalists and educators for the guide. ELI is currently exploring opportunities for reprinting additional copies to help meet the continuing demand from the educational and journalism communities.

  13. Standards for Cataloging Nonprint Materials. Third Edition.

    ERIC Educational Resources Information Center

    Quinly, William J.; And Others

    Rules for cataloging non-print media are presented. The publication is devoted exclusively to cataloging standards since coding of many non-print media is included in the Library of Congress MARC system. All elements which should appear on the cataloging card are identified; the elements of the description are described with the MARC format in…

  14. NRP 7th Edition: Are You Prepared?

    PubMed

    Zaichkin, Jeanette; Mccarney, Linda; Weiner, Gary

    2016-01-01

    The seventh edition of the American Academy of Pediatrics/American Heart Association Neonatal Resuscitation Program (NRP) materials must be in use by January 1, 2017. As in previous editions, changes in resuscitation science are based on an international review and consensus of current resuscitation science. The seventh edition NRP materials also include enhancements to training materials aimed at improving the quality of NRP instruction and providing the opportunity for ongoing education. A standardized approach to instructor training, an online Instructor Toolkit, eSim cases, and a new learning management system are among the new resources. PMID:27461196

  15. New Approaches for Printed Electronics Manufacturing

    NASA Astrophysics Data System (ADS)

    Mahajan, Ankit

    In printed electronics, electronic inks are patterned onto flexible substrates using roll-to-roll (R2R) compatible graphic printing methods. For applications where large-area, conformal electronics are necessary, printed electronics holds a competitive advantage over rigid, semiconductor circuitry, which does not scale efficiently to large areas. However, in order to fully realize the true potential of printed electronics, several manufacturing hurdles need to be overcome. Firstly, minimum feature sizes produced by graphic printing methods are typically greater than 25 microm, which is at least an order of magnitude higher for dense, high performing electronics. In this thesis, conductive features down to 1.5 microm are demonstrated using a novel inkjet printing-based process. Secondly, high-resolution printed conductors usually have poor current-carrying capacity, especially for longer wires in large-area applications. This thesis explores the fundamentals of aerosol-jet printing and reveals the regime for printing high-resolution lines with excellent current carrying capacity. Additionally, a novel manufacturing process is demonstrated, which can process 2.5 microm wide conductive wires with linear resistances as small as 5 O mm -1. Another challenge for printed electronics manufacturing is to deal with topography produced on the substrate surface by printed features. Besides complicating the subsequent use of contact-printing methods, surface topography is a source of poor device yields as well. This thesis describes two novel methodologies of creating topography-free printed surfaces. In the first method, nanometer-level smooth, planarized silver lines are obtained using a transfer printing approach. In the second method, open microchannels, imprinted in plastic substrates, are filled with a controlled amount of metal using liquid-based additive processes, to obtain conductive wires flush with the substrate surface. Finally, this thesis addresses the issue of

  16. Marketing/Planning Library and Information Services. Second Edition.

    ERIC Educational Resources Information Center

    Weingand, Darlene E.

    In the first edition of this book, the concepts of marketing and planning library and information services were presented as effective managerial strategies. Several paragraphs from the introduction to the first edition are reproduced, with author commentary, in this edition as an affirmation that the message is still true. In this second edition,…

  17. Three-dimensional bio-printing.

    PubMed

    Gu, Qi; Hao, Jie; Lu, YangJie; Wang, Liu; Wallace, Gordon G; Zhou, Qi

    2015-05-01

    Three-dimensional (3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing. PMID:25921944

  18. Plasma jet printing for flexible substrates

    NASA Astrophysics Data System (ADS)

    Gandhiraman, Ram P.; Singh, Eric; Diaz-Cartagena, Diana C.; Nordlund, Dennis; Koehne, Jessica; Meyyappan, M.

    2016-03-01

    Recent interest in flexible electronics and wearable devices has created a demand for fast and highly repeatable printing processes suitable for device manufacturing. Robust printing technology is critical for the integration of sensors and other devices on flexible substrates such as paper and textile. An atmospheric pressure plasma-based printing process has been developed to deposit different types of nanomaterials on flexible substrates. Multiwalled carbon nanotubes were deposited on paper to demonstrate site-selective deposition as well as direct printing without any type of patterning. Plasma-printed nanotubes were compared with non-plasma-printed samples under similar gas flow and other experimental conditions and found to be denser with higher conductivity. The utility of the nanotubes on the paper substrate as a biosensor and chemical sensor was demonstrated by the detection of dopamine, a neurotransmitter, and ammonia, respectively.

  19. High speed printing with polygon scan heads

    NASA Astrophysics Data System (ADS)

    Stutz, Glenn

    2016-03-01

    To reduce and in many cases eliminate the costs associated with high volume printing of consumer and industrial products, this paper investigates and validates the use of the new generation of high speed pulse on demand (POD) lasers in concert with high speed (HS) polygon scan heads (PSH). Associated costs include consumables such as printing ink and nozzles, provisioning labor, maintenance and repair expense as well as reduction of printing lines due to high through put. Targets that are applicable and investigated include direct printing on plastics, printing on paper/cardboard as well as printing on labels. Market segments would include consumer products (CPG), medical and pharmaceutical products, universal ID (UID), and industrial products. In regards to the POD lasers employed, the wavelengths include UV(355nm), Green (532nm) and IR (1064nm) operating within the repetition range of 180 to 250 KHz.

  20. 3D Printing of Graphene Aerogels.

    PubMed

    Zhang, Qiangqiang; Zhang, Feng; Medarametla, Sai Pradeep; Li, Hui; Zhou, Chi; Lin, Dong

    2016-04-01

    3D printing of a graphene aerogel with true 3D overhang structures is highlighted. The aerogel is fabricated by combining drop-on-demand 3D printing and freeze casting. The water-based GO ink is ejected and freeze-cast into designed 3D structures. The lightweight (<10 mg cm(-3) ) 3D printed graphene aerogel presents superelastic and high electrical conduction. PMID:26861680

  1. Three Dimensional Printing in Orthopaedic Surgery

    PubMed Central

    Mulford, Jonathan; MacKay, N; Babazadeh, S

    2016-01-01

    Objectives: Three dimensional (3D) printing technology has many current and future applications in orthopaedics. The objectives of this article are to review published literature regarding applications of 3D technology in orthopaedic surgery with a focus on knee surgery. Methods: A narrative review of the applications of 3D printing technology in orthopaedic practice was achieved by a search of computerised databases, internet and reviewing references of identified publications. Results: There is current widespread use of 3D printing technology in orthopaedics. 3D technology can be used in education, preoperative planning and custom manufacturing. Custom manufacturing applications include surgical guides, prosthetics and implants. Many future applications exist including biological applications. 3D printed models of anatomy have assisted in the education of patients, students, trainees and surgeons. 3D printed models also assist with surgical planning of complex injuries or unusual anatomy. 3D printed surgical guides may simplify surgery, make surgery precise and reduce operative time. Computer models based on MRI or CT scans are utilised to plan surgery and placement of implants. Complex osteotomies can be performed using 3D printed surgical guides. This can be particularly useful around the knee. A 3D printed guide allows pre osteotomy drill holes for the plate fixation and provides an osteotomy guide to allow precise osteotomy. 3D printed surgical guides for knee replacement are widely available. 3D printing has allowed the emergence of custom implants. Custom implants that are patient specific have been particularly used for complex revision arthroplasty or for very difficult cases with altered anatomy. Future applications are likely to include biological 3D printing of cartilage and bone scaffolds. Conclusion: 3D printing in orthopaedic surgery has and will continue to change orthopaedic practice. Its role is to provide safe, reproducible, reliable models with

  2. NASA printing, duplicating, and copying management handbook

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This handbook provides information and procedures for the implementation of NASA policy and applicable laws and regulations relating to printing, duplicating, and copying. The topics addressed include a description of relevant laws and regulations, authorizations required, and responsible entities for NASA printing, duplicating, and copying. The policy of NASA is to ensure understanding and application of authority and responsibility on printing matters. Where necessary, the handbook clarifies the intent of basic laws and regulations applicable to NASA.

  3. RNA editing generates cellular subsets with diverse sequence within populations.

    PubMed

    Harjanto, Dewi; Papamarkou, Theodore; Oates, Chris J; Rayon-Estrada, Violeta; Papavasiliou, F Nina; Papavasiliou, Anastasia

    2016-01-01

    RNA editing is a mutational mechanism that specifically alters the nucleotide content in transcribed RNA. However, editing rates vary widely, and could result from equivalent editing amongst individual cells, or represent an average of variable editing within a population. Here we present a hierarchical Bayesian model that quantifies the variance of editing rates at specific sites using RNA-seq data from both single cells, and a cognate bulk sample to distinguish between these two possibilities. The model predicts high variance for specific edited sites in murine macrophages and dendritic cells, findings that we validated experimentally by using targeted amplification of specific editable transcripts from single cells. The model also predicts changes in variance in editing rates for specific sites in dendritic cells during the course of LPS stimulation. Our data demonstrate substantial variance in editing signatures amongst single cells, supporting the notion that RNA editing generates diversity within cellular populations. PMID:27418407

  4. RNA editing generates cellular subsets with diverse sequence within populations

    PubMed Central

    Harjanto, Dewi; Papamarkou, Theodore; Oates, Chris J.; Rayon-Estrada, Violeta; Papavasiliou, F. Nina; Papavasiliou, Anastasia

    2016-01-01

    RNA editing is a mutational mechanism that specifically alters the nucleotide content in transcribed RNA. However, editing rates vary widely, and could result from equivalent editing amongst individual cells, or represent an average of variable editing within a population. Here we present a hierarchical Bayesian model that quantifies the variance of editing rates at specific sites using RNA-seq data from both single cells, and a cognate bulk sample to distinguish between these two possibilities. The model predicts high variance for specific edited sites in murine macrophages and dendritic cells, findings that we validated experimentally by using targeted amplification of specific editable transcripts from single cells. The model also predicts changes in variance in editing rates for specific sites in dendritic cells during the course of LPS stimulation. Our data demonstrate substantial variance in editing signatures amongst single cells, supporting the notion that RNA editing generates diversity within cellular populations. PMID:27418407

  5. BOOK REVIEW: A Journey with Fred Hoyle (Second Edition)

    NASA Astrophysics Data System (ADS)

    Wickramasinghe, Chandra; Sterken, Christiaan

    2013-12-01

    the accepted views on the origin of life (the primordial soup theory). This led to their two "heresies": disease-causing viruses come from space, and microbial life is omnipresent in interstellar space. They also opposed Darwinian theory, and launched a frontal assault on conventional theories of biological evolution on Earth. Hoyle, though, always played the role of devil's advocate until he was convinced that there were overwhelming arguments to support one of his radical propositions. All of this was done before the era of mass communication and powerful computers. The book also is a testimony about how scientists really work and how they cope with deep cultural bias, argumentation based on articles of faith, misrepresentations, standard dogmas, prejudices, jealousies, political intrigues, irrelevant squabbles in the "cloisters of universities" and politicised academies of science. Most interesting is also that, already in the first edition, reference is made to the detrimental impact of the practice of counting research papers and citations, to the role of the media in reporting on big science, and to how the publishing business works. The story also reveals that, despite high productivity, the continuity of their team was repeatedly threatened. In this context, Chandra Wickramasinghe's statement "my work was a solace" can be seen as pep talk for the ears of any desperate young scientist. This book is well worth reading, not only by astronomy students (and their supervisors), but also by any student in the physical sciences. The book is beautifully typeset in LaTeX by Stallion Press, and printed on fine glossy paper. It is a pity that the graphics are rather poor reproductions of the original graphs. More disturbing, though, is the number of typographical errors that were present in the first edition, and were not corrected for the second edition.

  6. Printed Electronic Devices in Human Spaceflight

    NASA Technical Reports Server (NTRS)

    Bacon, John B.

    2004-01-01

    The space environment requires robust sensing, control, and automation, whether in support of human spaceflight or of robotic exploration. Spaceflight embodies the known extremes of temperature, radiation, shock, vibration, and static loads, and demands high reliability at the lowest possible mass. Because printed electronic circuits fulfill all these requirements, printed circuit technology and the exploration of space have been closely coupled throughout their short histories. In this presentation, we will explore the space (and space launch) environments as drivers of printed circuit design, a brief history of NASA's use of printed electronic circuits, and we will examine future requirements for such circuits in our continued exploration of space.

  7. Recent developments and directions in printed nanomaterials

    NASA Astrophysics Data System (ADS)

    Choi, Hyung Woo; Zhou, Tianlei; Singh, Madhusudan; Jabbour, Ghassan E.

    2015-02-01

    In this review, we survey several recent developments in printing of nanomaterials for contacts, transistors, sensors of various kinds, light-emitting diodes, solar cells, memory devices, and bone and organ implants. The commonly used nanomaterials are classified according to whether they are conductive, semiconducting/insulating or biological in nature. While many printing processes are covered, special attention is paid to inkjet printing and roll-to-roll printing in light of their complexity and popularity. In conclusion, we present our view of the future development of this field.

  8. Active origami by 4D printing

    NASA Astrophysics Data System (ADS)

    Ge, Qi; Dunn, Conner K.; Qi, H. Jerry; Dunn, Martin L.

    2014-09-01

    Recent advances in three dimensional (3D) printing technology that allow multiple materials to be printed within each layer enable the creation of materials and components with precisely controlled heterogeneous microstructures. In addition, active materials, such as shape memory polymers, can be printed to create an active microstructure within a solid. These active materials can subsequently be activated in a controlled manner to change the shape or configuration of the solid in response to an environmental stimulus. This has been termed 4D printing, with the 4th dimension being the time-dependent shape change after the printing. In this paper, we advance the 4D printing concept to the design and fabrication of active origami, where a flat sheet automatically folds into a complicated 3D component. Here we print active composites with shape memory polymer fibers precisely printed in an elastomeric matrix and use them as intelligent active hinges to enable origami folding patterns. We develop a theoretical model to provide guidance in selecting design parameters such as fiber dimensions, hinge length, and programming strains and temperature. Using the model, we design and fabricate several active origami components that assemble from flat polymer sheets, including a box, a pyramid, and two origami airplanes. In addition, we directly print a 3D box with active composite hinges and program it to assume a temporary flat shape that subsequently recovers to the 3D box shape on demand.

  9. Considerations for millimeter wave printed antennas

    NASA Technical Reports Server (NTRS)

    Pozar, D. M.

    1983-01-01

    Calculated data are presented on the performance of printed antenna elements on substrates which may be electrically thick, as would be the case for printed antennas at millimeter wave frequencies. Printed dipoles and microstrip patch antennas on polytetrafluoroethylene (PTFE), quartz, and gallium arsenide substrates are considered. Data are given for resonant length, resonant resistance, bandwidth, loss due to surface waves, loss due to dielectric heating, and mutual coupling. Also presented is an optimization procedure for maximizing or minimizing power launched into surface waves from a multielement printed antenna array. The data are calculated by a moment method solution.

  10. Multienzyme Inkjet Printed 2D Arrays.

    PubMed

    Gdor, Efrat; Shemesh, Shay; Magdassi, Shlomo; Mandler, Daniel

    2015-08-19

    The use of printing to produce 2D arrays is well established, and should be relatively facile to adapt for the purpose of printing biomaterials; however, very few studies have been published using enzyme solutions as inks. Among the printing technologies, inkjet printing is highly suitable for printing biomaterials and specifically enzymes, as it offers many advantages. Formulation of the inkjet inks is relatively simple and can be adjusted to a variety of biomaterials, while providing nonharmful environment to the enzymes. Here we demonstrate the applicability of inkjet printing for patterning multiple enzymes in a predefined array in a very straightforward, noncontact method. Specifically, various arrays of the enzymes glucose oxidase (GOx), invertase (INV) and horseradish peroxidase (HP) were printed on aminated glass surfaces, followed by immobilization using glutardialdehyde after printing. Scanning electrochemical microscopy (SECM) was used for imaging the printed patterns and to ascertain the enzyme activity. The successful formation of 2D arrays consisting of enzymes was explored as a means of developing the first surface confined enzyme based logic gates. Principally, XOR and AND gates, each consisting of two enzymes as the Boolean operators, were assembled, and their operation was studied by SECM. PMID:26214072

  11. Large Area Printing of Organic Transistors

    NASA Astrophysics Data System (ADS)

    Blanchet, Graciela B.; Rogers, J. A.; Lefenfeld, M.; Fincher, C. R.; Loo, Jueh-Lin

    2003-03-01

    Organic electronic systems offer the advantage of lightweight, mechanical flexibility and large area coverage at potentially lower manufacturing cost. Although the production of functioning plastic transistors using approaches such as ink jet, screen printing and stamping, has been described in the literature, no one-transistor layer has yet been fabricated using a technique appropriate for their commercial ization. The solution processability of many organics may ultimately allow for the printing of electronic devices in a printing press at high speeds and in a reel to reel configuration. However, designing chemically compatible solutions to be printed sequentially represents a significant technical barrier to achieving all-printed plastic electronic systems. The work presented here represents a step change in the fabrication of organic electronic devices. We introduce thermal transfer, a non-lithographic technique that enables printing multi-layer electronics devices via a dry (i.e. solvent-less) additive process. This high-speed method is capable of patterning a range of organic materials over large areas ( 1 m2 ) with micron dimensions and excellent electrical performance. The 0.5 m2 transistor array backplane printed via thermal transfer represent the most advanced demonstration of a novel printing technology applied to the fabrication of large area integrated electronic devices. Dry transfer printing may provide a practical route to realizing the benefits of plastic materials for electronics.

  12. Printed-Compliant Electrochemical Systems

    NASA Astrophysics Data System (ADS)

    Gaikwad, Abhinav Machhindra

    Compliant electronic devices such as health monitoring tags, wearable electronics, fabricated using add-on printing techniques or by patterning traditional silicon based electronics in ultrathin format, enable them to flex, stretch and twist without any noticeable change in performance. These devices require a power source---a primary or secondary battery---to power the electronics. Traditional forms of batteries are bulky and negate the advantages of this new class of devices. Herein, I investigate various printing techniques and architectures that enable compliant batteries and study the performance of such batteries under mechanical deformations. Firstly, this dissertation investigates electrochemical-mechanical performance of a dispenser printed micro-battery using a microfluidic cell. Nanoparticulate silver ink was printed and cured to form silver electrodes, which was charged in-situ to form a silver-zinc battery. The electrochemical performance of the silver-zinc micro-battery was similar to macro-sized batteries. The shear stress generated by flow of electrolyte over the electrode was used to emulate the shear stress generated during flexing and was used as a tool to study the shear strength of the silver electrode at different state of charge. The dissertation then investigates supported architecture as a reinforcement to maintain the performance of the battery under strain. We demonstrate a highly flexible Zn-MnO2 alkalinebattery by embedding the electrochemically active particles in a mesh support. The mesh support absorbs the stresses generated during flexing. A Similar principle was used to make a stretchable battery. The backbone of the stretchable electrode was a stretchable fabric with silver-coated fibers weaved through a rubber network, which served as the current collector. The fabric was coated with Zn and MnO2 to form a stretchable electrode. Due to the weave architecture the electrode could stretch by 100% without any loss is contact between

  13. Printed circuit dispersive transmission line

    DOEpatents

    Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

    1991-08-27

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

  14. Printed circuit dispersive transmission line

    DOEpatents

    Ikezi, Hiroyuki; Lin-Liu, Yuh-Ren; DeGrassie, John S.

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  15. i3DP, a robust 3D printing approach enabling genetic post-printing surface modification.

    PubMed

    Wang, Xiaolong; Cai, Xiaobing; Guo, Qiuquan; Zhang, Tengyuan; Kobe, Brad; Yang, Jun

    2013-10-01

    Initiator integrated 3D printing, namely i3DP, was developed by incorporating a vinyl-terminated initiator into UV curable resin to make functional structural materials that enable genetic post-printing surface-initiated modification. Taking advantage of 3D printing and surface-initiated ATRP, the feasible i3DP makes 3D printed complex architectures possible for nearly any desired surface modification for various applications, for example, even pouring water into a sieve was readily achieved. PMID:24002351

  16. Research Review: Magazine Editors and Editing Practices.

    ERIC Educational Resources Information Center

    Jolliffe, Lee

    1994-01-01

    Reviews and critiques literature in the subfield of magazine editing research, chiefly biographical studies of individual editors and various types of studies of editorial practices, including surveys, magazine content analyses, and close qualitative examinations of editors' relationships with others. (SR)

  17. ASTM standards on thermocouples, 2nd edition

    SciTech Connect

    Not Available

    1986-01-01

    This edition has been expanded to include sixteen selected ASTM methods and practices on thermocouples. It also contains a Temperature Electromotive Force (EMF) Table for the NICROSIL-NISIL Thermocouple System.

  18. An Automatic Editing Algorithm for GPS data

    NASA Astrophysics Data System (ADS)

    Blewitt, Geoffrey

    1990-03-01

    An algorithm has been developed to edit automatically Global Positioning System data such that outlier deletion, cycle slip identification and correction are independent of clock instability, selective availability, receiver-satellite kinematics, and tropospheric conditions. This algorithm, called TurboEdit, operates on undifferenced, dual frequency carrier phase data, and requires (1) the use of P code pseudorange data and (2) a smoothly varying ionospheric electron content. The latter requirement can be relaxed if the analysis software incorporates ambiguity resolution techniques to estimate unresolved cycle slip parameters. TurboEdit was tested on the large data set from the CASA Uno experiment, which contained over 2500 cycle slips. Analyst intervention was required on 1% of the station-satellite passes, almost all of these problems being due to difficulties in extrapolating variations in the ionospheric delay. The algorithm is presently being adapted for real time data editing in the Rogue receiver for continuous monitoring applications.

  19. A genome editing primer for the hematologist.

    PubMed

    Hoban, Megan D; Bauer, Daniel E

    2016-05-26

    Gene editing enables the site-specific modification of the genome. These technologies have rapidly advanced such that they have entered common use in experimental hematology to investigate genetic function. In addition, genome editing is becoming increasingly plausible as a treatment modality to rectify genetic blood disorders and improve cellular therapies. Genome modification typically ensues from site-specific double-strand breaks and may result in a myriad of outcomes. Even single-strand nicks and targeted biochemical modifications that do not permanently alter the DNA sequence (epigenome editing) may be powerful instruments. In this review, we examine the various technologies, describe their advantages and shortcomings for engendering useful genetic alterations, and consider future prospects for genome editing to impact hematology. PMID:27053532

  20. An automatic editing algorithm for GPS data

    NASA Technical Reports Server (NTRS)

    Blewitt, Geoffrey

    1990-01-01

    An algorithm has been developed to edit automatically Global Positioning System data such that outlier deletion, cycle slip identification, and correction are independent of clock instability, selective availability, receiver-satellite kinematics, and tropospheric conditions. This algorithm, called TurboEdit, operates on undifferenced, dual frequency carrier phase data, and requires the use of P code pseudorange data and a smoothly varying ionospheric electron content. TurboEdit was tested on the large data set from the CASA Uno experiment, which contained over 2500 cycle slips.Analyst intervention was required on 1 percent of the station-satellite passes, almost all of these problems being due to difficulties in extrapolating variations in the ionospheric delay. The algorithm is presently being adapted for real time data editing in the Rogue receiver for continuous monitoring applications.

  1. Processing A Printed Wiring Board By Single Bath Electrodeposition

    DOEpatents

    Meltzer, Michael P.; Steffani, Christopher P.; Gonfiotti, Ray A.

    2003-04-15

    A method of processing a printed wiring board by single bath electrodeposition. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from the bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  2. Processing a printed wiring board by single bath electrodeposition

    DOEpatents

    Meltzer, Michael P.; Steffani, Christopher P.; Gonfiotti, Ray A.

    2010-12-07

    A method of processing a printed wiring board. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from a bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  3. Computing services writing and editing standards

    SciTech Connect

    Caruthers, C.M.; Heiberger, A.A.

    1987-11-01

    Computing Services Writing and Editing Standards explains how to write and organize technical information clearly and concisely; it also establishes Argonne National Laboratory Computing Services standards for grammar, usage, style, formats, and publication procedures. This manual will enable writers to produce better documents consistent with Computing Services standards in less time. Applying the specified principles will also speed up the editing, review, and revision processes.

  4. Looking forward to genetically edited fruit crops.

    PubMed

    Nagamangala Kanchiswamy, Chidananda; Sargent, Daniel James; Velasco, Riccardo; Maffei, Massimo E; Malnoy, Mickael

    2015-02-01

    The availability of genome sequences for many fruit crops has redefined the boundaries of genetic engineering and genetically modified (GM) crop plants. However commercialization of GM crops is hindered by numerous regulatory and social hurdles. Here, we focus on recently developed genome-editing tools for fruit crop improvement and their importance from the consumer perspective. Challenges and opportunities for the deployment of new genome-editing tools for fruit plants are also discussed. PMID:25129425

  5. High-throughput sequencing of partially edited trypanosome mRNAs reveals barriers to editing progression and evidence for alternative editing.

    PubMed

    Simpson, Rachel M; Bruno, Andrew E; Bard, Jonathan E; Buck, Michael J; Read, Laurie K

    2016-05-01

    Uridine insertion/deletion RNA editing in kinetoplastids entails the addition and deletion of uridine residues throughout the length of mitochondrial transcripts to generate translatable mRNAs. This complex process requires the coordinated use of several multiprotein complexes as well as the sequential use of noncoding template RNAs called guide RNAs. The majority of steady-state mitochondrial mRNAs are partially edited and often contain regions of mis-editing, termed junctions, whose role is unclear. Here, we report a novel method for sequencing entire populations of pre-edited partially edited, and fully edited RNAs and analyzing editing characteristics across populations using a new bioinformatics tool, the Trypanosome RNA Editing Alignment Tool (TREAT). Using TREAT, we examined populations of two transcripts, RPS12 and ND7-5', in wild-typeTrypanosoma brucei We provide evidence that the majority of partially edited sequences contain junctions, that intrinsic pause sites arise during the progression of editing, and that the mechanisms that mediate pausing in the generation of canonical fully edited sequences are distinct from those that mediate the ends of junction regions. Furthermore, we identify alternatively edited sequences that constitute plausible alternative open reading frames and identify substantial variability in the 5' UTRs of both canonical and alternatively edited sequences. This work is the first to use high-throughput sequencing to examine full-length sequences of whole populations of partially edited transcripts. Our method is highly applicable to current questions in the RNA editing field, including defining mechanisms of action for editing factors and identifying potential alternatively edited sequences. PMID:26908922

  6. Applications of genome editing in insects.

    PubMed

    Reid, William; O'Brochta, David A

    2016-02-01

    Insect genome editing was first reported 1991 in Drosophila melanogaster but the technology used was not portable to other species. Not until the recent development of facile, engineered DNA endonuclease systems has gene editing become widely available to insect scientists. Most applications in insects to date have been technical in nature but this is rapidly changing. Functional genomics and genetics-based insect control efforts will be major beneficiaries of the application of contemporary gene editing technologies. Engineered endonucleases like Cas9 make it possible to create powerful and effective gene drive systems that could be used to reduce or even eradicate specific insect populations. 'Best practices' for using Cas9-based editing are beginning to emerge making it easier and more effective to design and use but gene editing technologies still require traditional means of delivery in order to introduce them into somatic and germ cells of insects-microinjection of developing embryos. This constrains the use of these technologies by insect scientists. Insects created using editing technologies challenge existing governmental regulatory structures designed to manage genetically modified organisms. PMID:27436552

  7. On the evaluation of segmentation editing tools

    PubMed Central

    Heckel, Frank; Moltz, Jan H.; Meine, Hans; Geisler, Benjamin; Kießling, Andreas; D’Anastasi, Melvin; dos Santos, Daniel Pinto; Theruvath, Ashok Joseph; Hahn, Horst K.

    2014-01-01

    Abstract. Efficient segmentation editing tools are important components in the segmentation process, as no automatic methods exist that always generate sufficient results. Evaluating segmentation editing algorithms is challenging, because their quality depends on the user’s subjective impression. So far, no established methods for an objective, comprehensive evaluation of such tools exist and, particularly, intermediate segmentation results are not taken into account. We discuss the evaluation of editing algorithms in the context of tumor segmentation in computed tomography. We propose a rating scheme to qualitatively measure the accuracy and efficiency of editing tools in user studies. In order to objectively summarize the overall quality, we propose two scores based on the subjective rating and the quantified segmentation quality over time. Finally, a simulation-based evaluation approach is discussed, which allows a more reproducible evaluation without the need for human input. This automated evaluation complements user studies, allowing a more convincing evaluation, particularly during development, where frequent user studies are not possible. The proposed methods have been used to evaluate two dedicated editing algorithms on 131 representative tumor segmentations. We show how the comparison of editing algorithms benefits from the proposed methods. Our results also show the correlation of the suggested quality score with the qualitative ratings. PMID:26158063

  8. Machine-printed Arabic OCR

    NASA Astrophysics Data System (ADS)

    Hassibi, Khosrow M.

    1994-02-01

    This paper presents a brief overview of our research in the development of an OCR system for recognition of machine-printed texts in languages that use the Arabic alphabet. The cursive nature of machine-printed Arabic makes the segmentation of words into letters a challenging problem. In our approach, through a novel preliminary segmentation technique, a word is broken into pieces where each piece may not represent a valid letter in general. Neural networks trained on a training sample set of about 500 Arabic text images are used for recognition of these pieces. The rules governing the alphabet and character-level contextual information are used for recombining these pieces into valid letters. Higher-level contextual analysis schemes including the use of an Arabic lexicon and n-grams is also under development and are expected to improve the word recognition accuracy. The segmentation, recognition, and contextual analysis processes are closely integrated using a feedback scheme. The details of preparation of the training set and some recent results on training of the networks will be presented.

  9. Book Review: New Perspectives on Technical Editing

    NASA Astrophysics Data System (ADS)

    Murphy, A. J. (Ed.); Sterken, Christiaan

    2012-08-01

    New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

  10. A novel approach for latent print identification using accurate overlays to prioritize reference prints.

    PubMed

    Gantz, Daniel T; Gantz, Donald T; Walch, Mark A; Roberts, Maria Antonia; Buscaglia, JoAnn

    2014-12-01

    A novel approach to automated fingerprint matching and scoring that produces accurate locally and nonlinearly adjusted overlays of a latent print onto each reference print in a corpus is described. The technology, which addresses challenges inherent to latent prints, provides the latent print examiner with a prioritized ranking of candidate reference prints based on the overlays of the latent onto each candidate print. In addition to supporting current latent print comparison practices, this approach can make it possible to return a greater number of AFIS candidate prints because the ranked overlays provide a substantial starting point for latent-to-reference print comparison. To provide the image information required to create an accurate overlay of a latent print onto a reference print, "Ridge-Specific Markers" (RSMs), which correspond to short continuous segments of a ridge or furrow, are introduced. RSMs are reliably associated with any specific local section of a ridge or a furrow using the geometric information available from the image. Latent prints are commonly fragmentary, with reduced clarity and limited minutiae (i.e., ridge endings and bifurcations). Even in the absence of traditional minutiae, latent prints contain very important information in their ridges that permit automated matching using RSMs. No print orientation or information beyond the RSMs is required to generate the overlays. This automated process is applied to the 88 good quality latent prints in the NIST Special Database (SD) 27. Nonlinear overlays of each latent were produced onto all of the 88 reference prints in the NIST SD27. With fully automated processing, the true mate reference prints were ranked in the first candidate position for 80.7% of the latents tested, and 89.8% of the true mate reference prints ranked in the top ten positions. After manual post-processing of those latents for which the true mate reference print was not ranked first, these frequencies increased to 90

  11. PERFORMANCE DEMONSTRATIONS OF ALTERNATIVE SCREEN RECLAMATION PRODUCTS FOR SCREEN PRINTING

    EPA Science Inventory

    This project evaluated environmentally-preferable products for the screen reclamation process In screen printing during month-long demonstrations at 23 printing facilities nationwide. hrough the Environmental Protection Agency (EPA) Design for the Environment Printing Project, pr...

  12. Templated Dry Printing of Conductive Metal Nanoparticles

    NASA Astrophysics Data System (ADS)

    Rolfe, David Alexander

    Printed electronics can lower the cost and increase the ubiquity of electrical components such as batteries, sensors, and telemetry systems. Unfortunately, the advance of printed electronics has been held back by the limited minimum resolution, aspect ratio, and feature fidelity of present printing techniques such as gravure, screen printing and inkjet printing. Templated dry printing offers a solution to these problems by patterning nanoparticle inks into templates before drying. This dissertation shows advancements in two varieties of templated dry nanoprinting. The first, advective micromolding in vapor-permeable templates (AMPT) is a microfluidic approach that uses evaporation-driven mold filling to create submicron features with a 1:1 aspect ratio. We will discuss submicron surface acoustic wave (SAW) resonators made through this process, and the refinement process in the template manufacturing process necessary to make these devices. We also present modeling techniques that can be applied to future AMPT templates. We conclude with a modified templated dry printing that improves throughput and isolated feature patterning by transferring dry-templated features with laser ablation. This method utilizes surface energy-defined templates to pattern features via doctor blade coating. Patterned and dried features can be transferred to a polymer substrate with an Nd:YAG MOPA fiber laser, and printed features can be smaller than the laser beam width.

  13. 48 CFR 3452.208-71 - Printing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... shall not engage in, nor subcontract for, any printing (as that term is defined in Title I of the..., shall not be deemed to be printing. A unit is defined as one side of one sheet, one color only (with black counting as a color), with a maximum image size of 103/4 by 141/4 inches on a maximum paper...

  14. 48 CFR 3452.208-71 - Printing.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... shall not engage in, nor subcontract for, any printing (as that term is defined in Title I of the..., shall not be deemed to be printing. A unit is defined as one side of one sheet, one color only (with black counting as a color), with a maximum image size of 103/4 by 141/4 inches on a maximum paper...

  15. 3D Printing and Its Urologic Applications

    PubMed Central

    Soliman, Youssef; Feibus, Allison H; Baum, Neil

    2015-01-01

    3D printing is the development of 3D objects via an additive process in which successive layers of material are applied under computer control. This article discusses 3D printing, with an emphasis on its historical context and its potential use in the field of urology. PMID:26028997

  16. Advertising Content in Physical Activity Print Materials.

    ERIC Educational Resources Information Center

    Cardinal, Bradley J.

    2002-01-01

    Evaluated the advertising content contained in physical activity print materials. Analysis of print materials obtained from 80 sources (e.g., physicians' offices and fitness events) indicated that most materials contained some form of advertising. Materials coming from commercial product vendors generally contained more advertising than materials…

  17. 32 CFR 705.12 - Print media.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Print media. 705.12 Section 705.12 National... OFFICIAL RECORDS PUBLIC AFFAIRS REGULATIONS § 705.12 Print media. Requests for reprints of items published in national media will be addressed to the Chief of Information. Commands will be careful not...

  18. Printing on the LAN: Positives and Pratfalls.

    ERIC Educational Resources Information Center

    Farmer, Lesley S. J.

    1998-01-01

    Presents insights of what does and doesn't work in school library local area network (LAN) printing in terms of five "myths": (1) "You need a network to share a printer;" (2) "Printing is much faster on a network;" (3) "All printers are created equal;" (4) "If one is good, two are better;" (5) "I'll never learn." (AEF)

  19. Medical 3D Printing for the Radiologist.

    PubMed

    Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A; Cai, Tianrun; Kumamaru, Kanako K; George, Elizabeth; Wake, Nicole; Caterson, Edward J; Pomahac, Bohdan; Ho, Vincent B; Grant, Gerald T; Rybicki, Frank J

    2015-01-01

    While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. PMID:26562233

  20. Printing (Graphic Arts): Scope and Sequence.

    ERIC Educational Resources Information Center

    Nashville - Davidson County Metropolitan Public Schools, TN.

    Intended for use by all printing (graphic arts) instructors in the Metropolitan Nashville Public Schools, this guide provides a sequential listing of course content and scope. A course description provides a brief overview of the content of the courses offered in the printing (graphic arts) program. General course objectives are then listed.…

  1. 32 CFR 705.12 - Print media.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Print media. 705.12 Section 705.12 National... OFFICIAL RECORDS PUBLIC AFFAIRS REGULATIONS § 705.12 Print media. Requests for reprints of items published in national media will be addressed to the Chief of Information. Commands will be careful not...

  2. 48 CFR 1552.208-70 - Printing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Printing. 1552.208-70 Section 1552.208-70 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY CLAUSES AND... a color inkjet or color laser printer. This is not considered “printing.” However, if the...

  3. 3D Printed Block Copolymer Nanostructures

    ERIC Educational Resources Information Center

    Scalfani, Vincent F.; Turner, C. Heath; Rupar, Paul A.; Jenkins, Alexander H.; Bara, Jason E.

    2015-01-01

    The emergence of 3D printing has dramatically advanced the availability of tangible molecular and extended solid models. Interestingly, there are few nanostructure models available both commercially and through other do-it-yourself approaches such as 3D printing. This is unfortunate given the importance of nanotechnology in science today. In this…

  4. 3D Printing and Its Urologic Applications.

    PubMed

    Soliman, Youssef; Feibus, Allison H; Baum, Neil

    2015-01-01

    3D printing is the development of 3D objects via an additive process in which successive layers of material are applied under computer control. This article discusses 3D printing, with an emphasis on its historical context and its potential use in the field of urology. PMID:26028997

  5. PREFACE: 4th International Conference on: Preservation and Conservation Issues in Digital Printing and Digital Photography

    NASA Astrophysics Data System (ADS)

    Fricker, A.; Green, P.

    2010-04-01

    These conference proceedings contain the written papers of the contributions presented at the 4th International Conference on: Preservation and Conservation Issues in Digital Printing and Digital Photography. The conference was held at the Institute of Physics, London, UK on 27th-28th May 2010. Previous conferences in this series took place in 2000, 2003 and 2006. The aim of this conference series is to inform those responsible for the preservation of digitally printed materials about developments in digital photography and printing technologies. We aim to examine progress in research on inks and substrates and their significance for conservation and preservation issues and techniques. We also hope to develop links between related industries and the conservation/preservation world. Research areas explored in this conference include current developments and future trends in digital printing and photographic technologies; the effect of environmental, storage and salvage conditions on the durability of digital prints and photographs; image processing techniques; image permanence considerations and standards for fastness, permanence and the role of scanning and file formats. We would like to thank all participants for their contribution to the conference programme and these proceedings. Our thanks go to Ms C. Gu and Mr M. Sandy for chairing conference sessions. We are also grateful to Dawn Stewart and the Institute of Physics Conference Team for their invaluable support and assistance in arranging the conference and reception. Finally we would like to extend our thanks to the Society of Imaging Science and Technology (IS&T) for their sponsorship support. The Editors Acknowledgements Conference Organising Committee: Ms A Fricker and Dr. P Green (London College of Communication, University of the Arts London). Proceedings edited and compiled by Ms A Fricker and Dr. P Green.

  6. Residential Wiring. Fourth Edition. Teacher Edition [and] Student Guide [and] Student Workbook.

    ERIC Educational Resources Information Center

    Taylor, Mark

    Residential Wiring, the second publication in a series of three wiring publications, prepares students for entry-level employment in the residential wiring trade. Instructional materials include a teacher edition, student guide, and student workbook. The teacher edition begins with introductory pages, including a training and competency profile,…

  7. Biological Science: An Ecological Approach. BSCS Green Version. Teacher's Edition. Sixth Edition.

    ERIC Educational Resources Information Center

    Biological Sciences Curriculum Study, Colorado Springs.

    This book is the teacher's edition to the 1987 edition of the Biological Sciences Curriculum Study Green Version textbook. It contains directions for teaching with this version, a description of the accompanying materials, teaching strategies by chapters, lists of useful software, safety guidelines, a materials list, chemical safety information,…

  8. The Express-Lane Edit: Making Editing Useful for Young Adolescents

    ERIC Educational Resources Information Center

    Anderson, Jeff

    2008-01-01

    Editing is a powerful tool for writers, but are our methods of teaching it really demonstrating that power for young adolescents? The author, frustrated with students' inability to edit, blames his own approach and, beginning with a grocery store epiphany, works to develop a more effective system. Elements of his successful approach include time…

  9. Mechanism of reverse-offset printing

    NASA Astrophysics Data System (ADS)

    Choi, Young-Man; Lee, Eonseok; Lee, Taik-Min

    2015-07-01

    We propose a mechanism for reverse-offset printing based on a mathematical model. In reverse-offset printing, high resolution is achieved by patterning a coated, thin ink film with an intaglio-patterned cliché. By using the relationships among the ink blanket adhesion strength, the ink cliché adhesion strength, and the ink cohesion strength, a criterion for successful patterning is derived. We found that there is a printing window in the ink blanket adhesion strength that depends on the shear strength of the ink film and the dimensions of the pattern. The printing window diminishes as the line width decreases, resulting in a minimum printable line width. The proposed mechanism was verified by printing patterns with various shapes and dimensions.

  10. Automated Visual Inspection Method For Printed Capsules

    NASA Astrophysics Data System (ADS)

    Muneki, K.; Edamatsu, K.; Komuro, A.

    1984-12-01

    This method relates to the inspection of pharmaceutical filled capsules. The object of this inspection method is to detect mainly structural defects of the capsule with or without printing. To recognize the characters which are printed on the surface of the capsule is not an object. Capsules consist of a cap and body which are telescopically fitted together, and the bodies are filled with medicinal material. The two spherical ends and near the center region of each capsule should be inspected for defects. Further the area where printing may cover should be inspected for indications of such defects as a foreign material, a body dent or a speck. On the basis of projection technique, the body/cap boundary points can be distinguished from the printing edge points near the body/cap boundary, and the size of the area which the printing may cover can also be computed.

  11. Re-editing the paradigm of Cytidine (C) to Uridine (U) RNA editing

    PubMed Central

    Fossat, Nicolas; Tam, Patrick P L

    2014-01-01

    Cytidine (C) to Uridine (U) RNA editing is a post-trancriptional modification that until recently was known to only affect Apolipoprotein b (Apob) RNA and minimally require 2 components of the C to U editosome, the deaminase APOBEC1 and the RNA-binding protein A1CF. Our latest work has identified a novel RNA-binding protein, RBM47, as a core component of the editosome, which can substitute A1CF for the editing of ApoB mRNA. In addition, new RNA species that are subjected to C to U editing have been identified. Here, we highlight these recent discoveries and discuss how they change our view of the composition of the C to U editing machinery and expand our knowledge of the functional attributes of C to U RNA editing. PMID:25585043

  12. Study of lip print types among Nigerians.

    PubMed

    Adamu, L H; Taura, M G; Hamman, W O; Ojo, S A; Dahiru, A U; Sadeeq, A A; Umar, K B

    2015-12-01

    Lip prints in a narrow sense are normal lines and fissures in the form of wrinkles and grooves present in the zone of transition of lips. The aims of this study were to determine the types and association of lip prints as well as the role of the lip print as genetic marker in ethnic differentiation in multi-ethnic population of Nigeria. A total of 820 individuals (414 males and 406 females) participated. The study sample was drawn from different ethnic groups of Nigeria. The three major ethnic groups were identified and the minor groups were lumped together. This was to provide clear evidence on the ethnic differentiation based on lip print types among Nigerians. The lip prints were collected on microscopic glass slides and developed using carbon black powder. Each print was then divided into 10 compartments and analyzed using a magnifying lens. Chi-squared test was used for association between ethnicity and lip print types; p<0.05 was set as a level of significance. The result of the study showed the following lip print pattern in Nigerian population where Type V (31.39%) was predominant, followed by Type III (24.18%), Type IV (18.70%), Type I (14.87%), Type II (10.29%) and least frequent was Type I' (0.57%). Statistically significant association (p<0.05) of lip print types with ethnicity was found in upper left lateral compartments (ULL). It was concluded that lip prints show ethnic differences. Hence, they may hold potential promise as a supplementary tool in ethnic differentiation and in personal identification. PMID:26421606

  13. Far infrared supplement. Third edition: Catalog of infrared observations (lambda greater than or equal to 4.6 micrometers)

    NASA Technical Reports Server (NTRS)

    Gezari, Daniel Y.; Schmitz, Marion; Pitts, Patricia S.; Mead, Jaylee M.

    1993-01-01

    The Far Infrared Supplement contains a subset of the data in the full Catalog of Infrared Observations (all observations at wavelengths greater than 4.6 microns). The Catalog of Infrared Observations (CIO), NASA RP-1294, is a compilation of infrared astronomical observational data obtained from an extensive literature search of scientific journals and major astronomical catalogs and surveys. The literature search is complete for years 1965 through 1990 in this third edition. The catalog contains about 210,000 observations of roughly 20,000 individual sources, and supporting appendices. The expanded third edition contains coded IRAS 4-band data for all CIO sources detected by IRAS. The appendices include an atlas of infrared source positions (also included in this volume), two bibliographies of catalog listings, and an atlas of infrared spectral ranges. The complete CIO database is available to qualified users in printed, microfiche, and magnetic tape formats.

  14. Site-Directed RNA Editing in Vivo Can Be Triggered by the Light-Driven Assembly of an Artificial Riboprotein

    PubMed Central

    2015-01-01

    Site-directed RNA editing allows for the manipulation of RNA and protein function by reprogramming genetic information at the RNA level. For this we assemble artificial RNA-guided editases and demonstrate their transcript repair activity in cells and in developing embryos of the annelid Platynereis dumerilii. A hallmark of our assembly strategy is the covalent attachment of guideRNA and editing enzyme by applying the SNAP-tag technology, a process that we demonstrate here to be readily triggered by light in vitro, in mammalian cell culture, and also in P. dumerilii. Lacking both sophisticated chemistry and extensive genetic engineering, this technology provides a convenient route for the light-dependent switching of protein isoforms. The presented strategy may also serve as a blue-print for the engineering of addressable machineries that apply tailored nucleic acid analogues to manipulate RNA or DNA site-specifically in living organisms. PMID:26594902

  15. Printing Technologies for Medical Applications.

    PubMed

    Shafiee, Ashkan; Atala, Anthony

    2016-03-01

    Over the past 15 years, printers have been increasingly utilized for biomedical applications in various areas of medicine and tissue engineering. This review discusses the current and future applications of 3D bioprinting. Several 3D printing tools with broad applications from surgical planning to 3D models are being created, such as liver replicas and intermediate splints. Numerous researchers are exploring this technique to pattern cells or fabricate several different tissues and organs, such as blood vessels or cardiac patches. Current investigations in bioprinting applications are yielding further advances. As one of the fastest areas of industry expansion, 3D additive manufacturing will change techniques across biomedical applications, from research and testing models to surgical planning, device manufacturing, and tissue or organ replacement. PMID:26856235

  16. Printed Arabic optical character segmentation

    NASA Astrophysics Data System (ADS)

    Mohammad, Khader; Ayyesh, Muna; Qaroush, Aziz; Tumar, Iyad

    2015-03-01

    A considerable progress in recognition techniques for many non-Arabic characters has been achieved. In contrary, few efforts have been put on the research of Arabic characters. In any Optical Character Recognition (OCR) system the segmentation step is usually the essential stage in which an extensive portion of processing is devoted and a considerable share of recognition errors is attributed. In this research, a novel segmentation approach for machine Arabic printed text with diacritics is proposed. The proposed method reduces computation, errors, gives a clear description for the sub-word and has advantages over using the skeleton approach in which the data and information of the character can be lost. Both of initial evaluation and testing of the proposed method have been developed using MATLAB and shows 98.7% promising results.

  17. Triplex-mediated genome targeting and editing.

    PubMed

    Reza, Faisal; Glazer, Peter M

    2014-01-01

    Genome targeting and editing in vitro and in vivo can be achieved through an interplay of exogenously introduced molecules and the induction of endogenous recombination machinery. The former includes a repertoire of sequence-specific binding molecules for targeted induction and appropriation of this machinery, such as by triplex-forming oligonucleotides (TFOs) or triplex-forming peptide nucleic acids (PNAs) and recombinagenic donor DNA, respectively. This versatile targeting and editing via recombination approach facilitates high-fidelity and low-off-target genome mutagenesis, repair, expression, and regulation. Herein, we describe the current state-of-the-art in triplex-mediated genome targeting and editing with a perspective towards potential translational and therapeutic applications. We detail several materials and methods for the design, delivery, and use of triplex-forming and recombinagenic molecules for mediating and introducing specific, heritable, and safe genomic modifications. Furthermore we denote some guidelines for endogenous genome targeting and editing site identification and techniques to test targeting and editing efficiency. PMID:24557900

  18. BOOK REVIEW: Quantum Gravity: third edition Quantum Gravity: third edition

    NASA Astrophysics Data System (ADS)

    Rovelli, Carlo

    2012-09-01

    The request by Classical and Quantum Gravity to review the third edition of Claus Kiefer's 'Quantum Gravity' puts me in a slightly awkward position. This is a remarkably good book, which every person working in quantum gravity should have on the shelf. But in my opinion quantum gravity has undergone some dramatic advances in the last few years, of which the book makes no mention. Perhaps the omission only attests to the current vitality of the field, where progress is happening fast, but it is strange for me to review a thoughtful, knowledgeable and comprehensive book on my own field of research, which ignores what I myself consider the most interesting results to date. Kiefer's book is unique as a broad introduction and a reliable overview of quantum gravity. There are numerous books in the field which (often notwithstanding titles) focus on a single approach. There are also countless conference proceedings and article collections aiming to be encyclopaedic, but offering disorganized patchworks. Kiefer's book is a careful and thoughtful presentation of all aspects of the immense problem of quantum gravity. Kiefer is very learned, and brings together three rare qualities: he is pedagogical, he is capable of simplifying matter to the bones and capturing the essential, and he offers a serious and balanced evaluation of views and ideas. In a fractured field based on a major problem that does not yet have a solution, these qualities are precious. I recommend Kiefer's book to my students entering the field: to work in quantum gravity one needs a vast amount of technical knowledge as well as a grasp of different ideas, and Kiefer's book offers this with remarkable clarity. This novel third edition simplifies and improves the presentation of several topics, but also adds very valuable new material on quantum gravity phenomenology, loop quantum cosmology, asymptotic safety, Horava-Lifshitz gravity, analogue gravity, the holographic principle, and more. This is a testament

  19. BOOK REVIEW: The Complete A-Z Physics Handbook, Second Edition

    NASA Astrophysics Data System (ADS)

    Breithaupt, Jim

    2000-11-01

    The first edition of this book was published in 1997 and reviewed in Physics Education in March 1988. This second edition is 13 pages longer and contains a significant number of new entries, mostly in particle physics and astrophysics, to match the latest AS/A-level specifications. Some entries on topics such as surface tension that were removed from previous AS/A-level syllabuses have now been deleted. The revised book thus provides an effective alphabetical guide to key terms used in the latest AS/A-level specifications as most AS/A-level core terms are included, apart from terms for some of the new topics such as image processing in the new IOP AS/A-level specification. The style of the second edition is the same as the first, each entry commencing with the key term in bold print followed by an explanation of the term, accompanied by the relevant equation and/or a simple diagram where appropriate. Cross-references are given in italics. For example, the entry under quarks (which is one of the new entries) lists the six quarks and their characteristic properties in bullet point format then follows up with the information about the quark composition of baryons and mesons, giving the composition of the proton, the neutron and the pions as examples. The change of quark composition due to beta decay is mentioned with a cross-reference to beta decay. Other cross-references link to entries on the proton, the neutron and the four fundamental interactions. Lengthy entries such as the photoelectric effect each cover several pages, thus providing opportunities for in-depth revision. Useful theme entries provided in the first edition have been retained and referred to in a new two-page appendix on preparing for synoptic questions. Some proofs are provided such as the proof of the kinetic theory equation. Some experiments are described, each under an appropriate entry. Technically, the entries are reasonably accurate and usually expressed in appropriate and familiar language

  20. Correlation between lip prints and finger prints in sex determination and pattern predominance in 5000 subjects.

    PubMed

    Bansal, Neha; Sheikh, Soheyl; Bansal, Richa; Pallagati, Shambulingappa

    2013-12-01

    Fingerprints are considered to be the most reliable criteria for personal identification. In the past decades, lip-print studies (Cheiloscopy) attracted the attention of many scientists as a new tool for human identification in both civil and criminal issues. The present study was undertaken to observe the correlation between lip prints and finger print pattern in sex determination and to determine the pattern predominance in a sample of 5000 individuals. The study was carried out in 5000 individuals in Department of Oral Medicine and Radiology of Maharishi Markandeshwar College of Dental Sciences and Research, M.M. University, Mullana. Of the participants, 2500 were males and 2500 females. Lip prints and finger prints of the right hand were collected then studied and analyzed statistically. For lip prints TSUCHIHASHIS Y. classification (1970) was followed; HENRYS classification(1897) was followed for finger prints. Whorls were of a high frequency in males, but females presented with a high frequency of loops. Type I, I', II lip print pattern was most predominant in females while Type III and Type IV was most predominant in males. The present study described in detail that for both males and females, the most predominant lip-print patterns showed an association with the respective predominant finger print patterns. The establishment of a database of Cheiloscopy and Dactyloscopyis recommended for all individuals in a certain locality, which could be used as a reference in civil litigations and criminal cases. Such studies may be useful particularly in Forensic science and in justice. PMID:24776436

  1. Magnetic Properties of 3D Printed Toroids

    NASA Astrophysics Data System (ADS)

    Bollig, Lindsey; Otto, Austin; Hilpisch, Peter; Mowry, Greg; Nelson-Cheeseman, Brittany; Renewable Energy; Alternatives Lab (REAL) Team

    Transformers are ubiquitous in electronics today. Although toroidal geometries perform most efficiently, transformers are traditionally made with rectangular cross-sections due to the lower manufacturing costs. Additive manufacturing techniques (3D printing) can easily achieve toroidal geometries by building up a part through a series of 2D layers. To get strong magnetic properties in a 3D printed transformer, a composite filament is used containing Fe dispersed in a polymer matrix. How the resulting 3D printed toroid responds to a magnetic field depends on two structural factors of the printed 2D layers: fill factor (planar density) and fill pattern. In this work, we investigate how the fill factor and fill pattern affect the magnetic properties of 3D printed toroids. The magnetic properties of the printed toroids are measured by a custom circuit that produces a hysteresis loop for each toroid. Toroids with various fill factors and fill patterns are compared to determine how these two factors can affect the magnetic field the toroid can produce. These 3D printed toroids can be used for numerous applications in order to increase the efficiency of transformers by making it possible for manufacturers to make a toroidal geometry.

  2. Cancer in printing workers in Denmark.

    PubMed Central

    Lynge, E; Rix, B A; Villadsen, E; Andersen, I; Hink, M; Olsen, E; Møller, U L; Silfverberg, E

    1995-01-01

    OBJECTIVES--To study the cancer incidence in printing workers in Denmark. METHODS--The cohort of 15,534 men and 3593 women working in the printing industry in 1970 were followed up for death, emigrations, and incident cancer cases until the end of 1987. Their cancer incidence was compared with that of all economically active people in Denmark. The smoking and drinking habits reported by members of the printing trade unions at a survey in 1972 were compared with habits reported by members of other trade unions. RESULTS--Lung, bladder, renal pelvis, and primary liver cancers were in excess among the printing workers. The excess risks of lung cancer among the factory workers in newspaper and magazine production, of bladder cancer in typographers in printing establishments, of renal pelvis cancer in typographers and lithographers, and of primary liver cancer among lithographers and bookbinders exceeded those expected based on the reported smoking and drinking habits. CONCLUSION--Our results indicate, in line with a previous study from Manchester, that work with rotary letterpress printing was associated with an increased risk of lung cancer. The inconsistent results from studies on bladder cancer in printing workers may point to a risk confined to a certain subgroup. The sixfold risk of primary liver cancer in Danish lithographers warrants studies in other countries. PMID:8535493

  3. USGS Map-on-Demand Printing

    USGS Publications Warehouse

    U.S. Geological Survey

    1999-01-01

    Currently, the U.S. Geological Survey (USGS) uses conventional lithographic printing techniques to produce paper copies of most of its mapping products. This practice is not economical for those products that are in low demand. With the advent of newer technologies, high-speed, large-format printers have been coupled with innovative computer software to turn digital map data into a printed map. It is now possible to store and retrieve data from vast geospatial data bases and print a map on an as-needed basis; that is, print on demand, thereby eliminating the need to warehouse an inventory of paper maps for which there is low demand. Using print-on-demand technology, the USGS is implementing map-on-demand (MOD) printing for certain infrequently requested maps. By providing MOD, the USGS can offer an alternative to traditional, large-volume printing and can improve its responsiveness to customers by giving them greater access to USGS scientific data in a format that otherwise might not be available.

  4. Dimensional accuracy of 3D printed vertebra

    NASA Astrophysics Data System (ADS)

    Ogden, Kent; Ordway, Nathaniel; Diallo, Dalanda; Tillapaugh-Fay, Gwen; Aslan, Can

    2014-03-01

    3D printer applications in the biomedical sciences and medical imaging are expanding and will have an increasing impact on the practice of medicine. Orthopedic and reconstructive surgery has been an obvious area for development of 3D printer applications as the segmentation of bony anatomy to generate printable models is relatively straightforward. There are important issues that should be addressed when using 3D printed models for applications that may affect patient care; in particular the dimensional accuracy of the printed parts needs to be high to avoid poor decisions being made prior to surgery or therapeutic procedures. In this work, the dimensional accuracy of 3D printed vertebral bodies derived from CT data for a cadaver spine is compared with direct measurements on the ex-vivo vertebra and with measurements made on the 3D rendered vertebra using commercial 3D image processing software. The vertebra was printed on a consumer grade 3D printer using an additive print process using PLA (polylactic acid) filament. Measurements were made for 15 different anatomic features of the vertebral body, including vertebral body height, endplate width and depth, pedicle height and width, and spinal canal width and depth, among others. It is shown that for the segmentation and printing process used, the results of measurements made on the 3D printed vertebral body are substantially the same as those produced by direct measurement on the vertebra and measurements made on the 3D rendered vertebra.

  5. Advances and Future Challenges in Printed Batteries.

    PubMed

    Sousa, Ricardo E; Costa, Carlos M; Lanceros-Méndez, Senentxu

    2015-11-01

    There is an increasing interest in thin and flexible energy storage devices to meet modern society's needs for applications such as radio frequency sensing, interactive packaging, and other consumer products. Printed batteries comply with these requirements and are an excellent alternative to conventional batteries for many applications. Flexible and microbatteries are also included in the area of printed batteries when fabricated using printing technologies. The main characteristics, advantages, disadvantages, developments, and printing techniques of printed batteries are presented and discussed in this Review. The state-of-the-art takes into account both the research and industrial levels. On the academic level, the research progress of printed batteries is divided into lithium-ion and Zn-manganese dioxide batteries and other battery types, with emphasis on the different materials for anode, cathode, and separator as well as in the battery design. With respect to the industrial state-of-the-art, materials, device formulations, and manufacturing techniques are presented. Finally, the prospects and challenges of printed batteries are discussed. PMID:26404647

  6. Composition of the editing complex of Trypanosoma brucei.

    PubMed

    Stuart, K; Panigrahi, A K; Schnaufer, A; Drozdz, M; Clayton, C; Salavati, R

    2002-01-29

    The RNA editing that produces most functional mRNAs in trypanosomes is catalysed by a multiprotein complex. This complex catalyses the endoribonucleolytic cleavage, uridylate addition and removal, and RNA ligation steps of the editing process. Enzymatic and in vitro editing analyses reveal that each catalytic step contributes to the specificity of the editing and, together with the interaction between gRNA and the mRNA, results in precisely edited mRNAs. Tandem mass spectrometric analysis was used to identify the genes for several components of biochemically purified editing complexes. Their identity and presence in the editing complex were confirmed using immunochemical analyses utilizing mAbs specific to the editing complex components. The genes for two RNA ligases were identified. Genetic studies show that some, but not all, of the components of the complex are essential for editing. The TbMP52 RNA ligase is essential for editing while the TbMP48 RNA ligase is not. Editing was found to be essential in bloodstream form trypanosomes. This is surprising because mutants devoid of genes encoding RNAs that become edited survive as bloodstream forms but encouraging since editing complex components may be targets for chemotherapy. PMID:11839184

  7. Ethical and regulatory aspects of genome editing.

    PubMed

    Kohn, Donald B; Porteus, Matthew H; Scharenberg, Andrew M

    2016-05-26

    Gene editing is a rapidly developing area of biotechnology in which the nucleotide sequence of the genome of living cells is precisely changed. The use of genome-editing technologies to modify various types of blood cells, including hematopoietic stem cells, has emerged as an important field of therapeutic development for hematopoietic disease. Although these technologies offer the potential for generation of transformative therapies for patients suffering from myriad disorders of hematopoiesis, their application for therapeutic modification of primary human cells is still in its infancy. Consequently, development of ethical and regulatory frameworks that ensure their safe and effective use is an increasingly important consideration. Here, we review a number of issues that have the potential to impact the clinical implementation of genome-editing technologies, and suggest paths forward for resolving them such that new therapies can be safely and rapidly translated to the clinic. PMID:27053531

  8. An aerial 3D printing test mission

    NASA Astrophysics Data System (ADS)

    Hirsch, Michael; McGuire, Thomas; Parsons, Michael; Leake, Skye; Straub, Jeremy

    2016-05-01

    This paper provides an overview of an aerial 3D printing technology, its development and its testing. This technology is potentially useful in its own right. In addition, this work advances the development of a related in-space 3D printing technology. A series of aerial 3D printing test missions, used to test the aerial printing technology, are discussed. Through completing these test missions, the design for an in-space 3D printer may be advanced. The current design for the in-space 3D printer involves focusing thermal energy to heat an extrusion head and allow for the extrusion of molten print material. Plastics can be used as well as composites including metal, allowing for the extrusion of conductive material. A variety of experiments will be used to test this initial 3D printer design. High altitude balloons will be used to test the effects of microgravity on 3D printing, as well as parabolic flight tests. Zero pressure balloons can be used to test the effect of long 3D printing missions subjected to low temperatures. Vacuum chambers will be used to test 3D printing in a vacuum environment. The results will be used to adapt a current prototype of an in-space 3D printer. Then, a small scale prototype can be sent into low-Earth orbit as a 3-U cube satellite. With the ability to 3D print in space demonstrated, future missions can launch production hardware through which the sustainability and durability of structures in space will be greatly improved.

  9. Connecting Metallic Nanoparticles by Optical Printing.

    PubMed

    Gargiulo, Julián; Cerrota, Santiago; Cortés, Emiliano; Violi, Ianina L; Stefani, Fernando D

    2016-02-10

    Optical printing is a simple and flexible method to bring colloidal nanoparticles from suspension to specific locations of a substrate. However, its application has been limited to the fabrication of arrays of isolated nanoparticles because, until now, it was never possible to bring nanoparticles closer together than approximately 300 nm. Here, we propose this limitation is due to thermophoretic repulsive forces generated by plasmonic heating of the NPs. We show how to overcome this obstacle and demonstrate the optical printing of connected nanoparticles with well-defined orientation. These experiments constitute a key step toward the fabrication by optical printing of functional nanostructures and microcircuits based on colloidal nanoparticles. PMID:26745330

  10. Transfer printing of graphene using gold film.

    PubMed

    Song, Li; Ci, Lijie; Gao, Wei; Ajayan, Pulickel M

    2009-06-23

    We report a facile transfer printing process for easily exfoliating prepatterned graphene from HOPG surfaces by using gold film as the transfer stamp. The transferred printed patterns consist of single- and few-layer graphene with macroscopic continuity. Raman spectra show that some defects appear along the edges of the graphene patterns, which were induced by the oxygen plasma-etching treatment of the HOPG surface. This transfer-printing technique paves a new and simple way to get large-scale graphene patterns on to any substrates. PMID:19438194

  11. Inkjet printing of 2D layered materials.

    PubMed

    Li, Jiantong; Lemme, Max C; Östling, Mikael

    2014-11-10

    Inkjet printing of 2D layered materials, such as graphene and MoS2, has attracted great interests for emerging electronics. However, incompatible rheology, low concentration, severe aggregation and toxicity of solvents constitute critical challenges which hamper the manufacturing efficiency and product quality. Here, we introduce a simple and general technology concept (distillation-assisted solvent exchange) to efficiently overcome these challenges. By implementing the concept, we have demonstrated excellent jetting performance, ideal printing patterns and a variety of promising applications for inkjet printing of 2D layered materials. PMID:25169938

  12. Three-dimensional Printing in Developing Countries.

    PubMed

    Ibrahim, Ahmed M S; Jose, Rod R; Rabie, Amr N; Gerstle, Theodore L; Lee, Bernard T; Lin, Samuel J

    2015-07-01

    The advent of 3-dimensional (3D) printing technology has facilitated the creation of customized objects. The lack of regulation in developing countries renders conventional means of addressing various healthcare issues challenging. 3D printing may provide a venue for addressing many of these concerns in an inexpensive and easily accessible fashion. These may potentially include the production of basic medical supplies, vaccination beads, laboratory equipment, and prosthetic limbs. As this technology continues to improve and prices are reduced, 3D printing has the potential ability to promote initiatives across the entire developing world, resulting in improved surgical care and providing a higher quality of healthcare to its residents. PMID:26301132

  13. Three-dimensional Printing in Developing Countries

    PubMed Central

    Ibrahim, Ahmed M. S.; Jose, Rod R.; Rabie, Amr N.; Gerstle, Theodore L.; Lee, Bernard T.

    2015-01-01

    Summary: The advent of 3-dimensional (3D) printing technology has facilitated the creation of customized objects. The lack of regulation in developing countries renders conventional means of addressing various healthcare issues challenging. 3D printing may provide a venue for addressing many of these concerns in an inexpensive and easily accessible fashion. These may potentially include the production of basic medical supplies, vaccination beads, laboratory equipment, and prosthetic limbs. As this technology continues to improve and prices are reduced, 3D printing has the potential ability to promote initiatives across the entire developing world, resulting in improved surgical care and providing a higher quality of healthcare to its residents. PMID:26301132

  14. Cryogenic 3D printing for tissue engineering.

    PubMed

    Adamkiewicz, Michal; Rubinsky, Boris

    2015-12-01

    We describe a new cryogenic 3D printing technology for freezing hydrogels, with a potential impact to tissue engineering. We show that complex frozen hydrogel structures can be generated when the 3D object is printed immersed in a liquid coolant (liquid nitrogen), whose upper surface is maintained at the same level as the highest deposited layer of the object. This novel approach ensures that the process of freezing is controlled precisely, and that already printed frozen layers remain at a constant temperature. We describe the device and present results which illustrate the potential of the new technology. PMID:26548335

  15. Genome editing in zebrafish: a practical overview.

    PubMed

    Sertori, Robert; Trengove, Monique; Basheer, Faiza; Ward, Alister C; Liongue, Clifford

    2016-07-01

    Zebrafish is a powerful model for the study of vertebrate development, being amenable to a wide range of genetic and other manipulations to probe the molecular basis of development and its perturbation in disease. Over recent years, genome editing approaches have become increasingly used as an efficient and sophisticated approach to precisely engineer the zebrafish genome, which has further enhanced the utility of this organism. This review provides a practical overview of genome editing and its application in zebrafish research, including alternate strategies for introducing and screening for specific genetic changes. PMID:26654901

  16. Therapeutic Genome Editing: Prospects and Challenges

    PubMed Central

    Cox, David Benjamin Turitz; Platt, Randall Jeffrey; Zhang, Feng

    2015-01-01

    Recent advances in the development of genome editing technologies based on programmable nucleases have significantly improved our ability to make precise changes in the genomes of eukaryotic cells. Genome editing is already broadening our ability to elucidate the contribution of genetics to disease by facilitating the creation of more accurate cellular and animal models of pathological processes. A particularly tantalizing application of programmable nucleases is the potential to directly correct genetic mutations in affected tissues and cells to treat diseases that are refractory to traditional therapies. Here we discuss current progress towards developing programmable nuclease-based therapies as well as future prospects and challenges. PMID:25654603

  17. Astronomy For Dummies, 2nd Edition

    NASA Astrophysics Data System (ADS)

    Maran, Stephen P.

    2005-04-01

    An accessible guide to the wonders of the night sky, now updated From asteroids to black holes, from quasars to white dwarfs, this new edition of Astronomy For Dummies takes backyard stargazers on a grand tour of the universe. Featuring star maps, charts, gorgeous full-color photographs, and easy-to-follow explanations, this fact-filled guide gives readers a leg up on the basic principles of astronomy and shows how to get the most out of binoculars, telescopes, planetarium visits, and other fun astronomical activities. This updated edition includes an updated color signature and covers the many discoveries made in recent years, as well as new astronomy Web sites.

  18. Transportation Energy Data Book, Edition 19

    SciTech Connect

    Davis, S.C.

    1999-09-01

    The Transportation Energy Data Book: Edition 19 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Transportation Technologies in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest editions of the Data Book are available to a larger audience via the Internet (http://www-cta.ornl.gov/data/tedb.htm).

  19. [On two editions of Yunyu Xuanji and their source].

    PubMed

    Deng, Yue-E

    2013-01-01

    Yunyu Xuanji is considered as one of the 400 key ancient books in the 'TCM Ancient Books Protection and Use Project' by the State Bureau of TCM. Two editions of this book are hand-written copies. The Qianyao edition was finished in the 52(nd) year of the Kangxi Period (1713). The other edition (Taoshi Xianyishukoucongshu) was probably done in the Late Qing Dynasty or the period of the Republic of China. By careful comparison, the contents of the two editions are basically the same, and only the preface of the former edition has been given some changes, which were probably made by later generations. The second manuscript was written in a more standard mode. Therefore the two editions were written according to the same literature and it is possible that the latter one is the copied edition of the Qianyao edition. PMID:23879984

  20. A systematic study of genetic algorithms with genotype editing

    SciTech Connect

    Huang, C. F.; Rocha, L. M.

    2004-01-01

    This paper presents our systematic study on an RNA-editing computational model of Genetic Algorithms (GA). This model is constructed based on several genetic editing characteristics that are gleaned from the RNA editing system as observed in several organisms. We have expanded the traditional Genetic Algorithm with artificial editing mechanisms as proposed by [15]. The incorporation of editing mechanisms provides a means for artificial agents with genetic descriptions to gain greater phenotypic plasticity, which may be environmentally regulated. The systematic study of this RNA-editing model has shed some light into the evolutionary implications of RNA editing and how to select proper RNA editors for design of more robust GAS. The results will also show promising applications to complex real-world problems. We expect that the framework proposed will both facilitate determining the evolutionary role of RNA editing in biology, and advance the current state of research in Evolutionary Computation.

  1. Printing Insecurity? The Security Implications of 3D-Printing of Weapons.

    PubMed

    Walther, Gerald

    2015-12-01

    In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the U.S. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing technology and 3D guns. It argues that current arms control and transfer policies are adequate to cover 3D-printed guns as well. However, while this analysis may hold up currently, progress in printing technology needs to be monitored to deal with future dangers pre-emptively. PMID:25520257

  2. Invisible photonic printing: computer designing graphics, UV printing and shown by a magnetic field.

    PubMed

    Hu, Haibo; Tang, Jian; Zhong, Hao; Xi, Zheng; Chen, Changle; Chen, Qianwang

    2013-01-01

    Invisible photonic printing, an emerging printing technique, is particularly useful for steganography and watermarking for anti-counterfeiting purposes. However, many challenges exist in order to realize this technique. Herein, we describe a novel photonic printing strategy targeting to overcome these challenges and realize fast and convenient fabrication of invisible photonic prints with good tenability and reproducibility. With this novel photonic printing technique, a variety of graphics with brilliant colors can be perfectly hidden in a soft and waterproof photonic-paper. The showing and hiding of the latent photonic prints are instantaneous with magnet as the only required instrument. In addition, this strategy has excellent practicality and allows end-user control of the structural design utilizing simple software on a PC. PMID:23508071

  3. Invisible photonic printing: computer designing graphics, UV printing and shown by a magnetic field

    PubMed Central

    Hu, Haibo; Tang, Jian; Zhong, Hao; Xi, Zheng; Chen, Changle; Chen, Qianwang

    2013-01-01

    Invisible photonic printing, an emerging printing technique, is particularly useful for steganography and watermarking for anti-counterfeiting purposes. However, many challenges exist in order to realize this technique. Herein, we describe a novel photonic printing strategy targeting to overcome these challenges and realize fast and convenient fabrication of invisible photonic prints with good tenability and reproducibility. With this novel photonic printing technique, a variety of graphics with brilliant colors can be perfectly hidden in a soft and waterproof photonic-paper. The showing and hiding of the latent photonic prints are instantaneous with magnet as the only required instrument. In addition, this strategy has excellent practicality and allows end-user control of the structural design utilizing simple software on a PC. PMID:23508071

  4. Shielded Metal Arc Welding and Carbon Arc Cutting--Air. Teacher Edition [and] Student Edition [and] Student Workbook. Third Edition.

    ERIC Educational Resources Information Center

    Harper, Eddie; Knapp, John

    This document contains the teacher and student texts and student workbook for a secondary-level course in shielded metal arc welding (SMAW) and carbon arc cutting that consists of units on the following topics: SMAW safety; SMAW equipment, applications, and techniques; hardfacing; and carbon arc cutting--air. The teacher edition includes the…

  5. Union catalogue of printed books of 15th, 16th and 17th centuries in European astronomical observatories.

    NASA Astrophysics Data System (ADS)

    Grassi, G.

    This catalogue deals with the scientific subjects of that historical period such as astronomy, astrology, chemistry, mathematics, physics, historia naturalis and so forth, and contains extremely rare volumes such as the first printed editions of the eminent Arab, Latin, Greek and Persian scientists Albumasar, Albohazen Aly, Aristoteles, Ptolemaeus, Pliny the Elder and Ulugh Beig. In addition the catalogue contains the first works of such great astronomers of the 16th and 17th centuries as Copernicus, Kepler, Clavius, Regiomontanus, Sacrobosco, Mercator, Newton, Gassendi, Galilei and Hevelius, just to quote the most representative ones. The catalogue is followed by a chronological index and an index of printers and publishers.

  6. Mutual impedance computation between printed dipoles

    NASA Astrophysics Data System (ADS)

    Alexopoulos, N. G.; Rana, I. E.

    1981-01-01

    The mutual impedance between microstrip dipoles printed on a grounded substrate is computed. Results for the microstrip dipoles in broadside, collinear, and echelon arrangements are presented. The significance of surface wave to mutual coupling is discussed.

  7. A New Spin: CDs as Printing Plates.

    ERIC Educational Resources Information Center

    Gamble, Harriet

    2000-01-01

    Describes a printmaking activity for use in tenth- to twelfth-grade art classes. Students use compact discs as printing plates, on which they depict a musical theme with drypoint etching. Discusses the process in detail. (CMK)

  8. 3D-printed bioanalytical devices

    NASA Astrophysics Data System (ADS)

    Bishop, Gregory W.; Satterwhite-Warden, Jennifer E.; Kadimisetty, Karteek; Rusling, James F.

    2016-07-01

    While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices.

  9. Planographic Prints--Without Inks and Brayers

    ERIC Educational Resources Information Center

    Daniel, Robert A.

    1972-01-01

    Activity described here is an outgrowth of efforts to show student teachers and in-service classroom teachers how they could introduce children to planographic printmaking without printing inks and brayers. (Author)

  10. 3D Printed Multimaterial Microfluidic Valve.

    PubMed

    Keating, Steven J; Gariboldi, Maria Isabella; Patrick, William G; Sharma, Sunanda; Kong, David S; Oxman, Neri

    2016-01-01

    We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to previous single material 3D printed valves that are stiff, these printed valves constrain fluidic deformation spatially, through combinations of stiff and flexible materials, to enable intricate geometries in an actuated, functionally graded device. Research presented marks a shift towards 3D printing multi-property programmable fluidic devices in a single step, in which integrated multimaterial valves can be used to control complex fluidic reactions for a variety of applications, including DNA assembly and analysis, continuous sampling and sensing, and soft robotics. PMID:27525809

  11. Device fabrication: Three-dimensional printed electronics

    NASA Astrophysics Data System (ADS)

    Lewis, Jennifer A.; Ahn, Bok Y.

    2015-02-01

    Can three-dimensional printing enable the mass customization of electronic devices? A study that exploits this method to create light-emitting diodes based on 'quantum dots' provides a step towards this goal.

  12. Printed wiring board system programmer's manual

    NASA Technical Reports Server (NTRS)

    Brinkerhoff, C. D.

    1973-01-01

    The printed wiring board system provides automated techniques for the design of printed circuit boards and hybrid circuit boards. The system consists of four programs: (1) the preprocessor program combines user supplied data and pre-defined library data to produce the detailed circuit description data; (2) the placement program assigns circuit components to specific areas of the board in a manner that optimizes the total interconnection length of the circuit; (3) the organizer program assigns pin interconnections to specific board levels and determines the optimal order in which the router program should attempt to layout the paths connecting the pins; and (4) the router program determines the wire paths which are to be used to connect each input pin pair on the circuit board. This document is intended to serve as a programmer's reference manual for the printed wiring board system. A detailed description of the internal logic and flow of the printed wiring board programs is included.

  13. 3D Printing for Tissue Engineering

    PubMed Central

    Jia, Jia; Yao, Hai; Mei, Ying

    2016-01-01

    Tissue engineering aims to fabricate functional tissue for applications in regenerative medicine and drug testing. More recently, 3D printing has shown great promise in tissue fabrication with a structural control from micro- to macro-scale by using a layer-by-layer approach. Whether through scaffold-based or scaffold-free approaches, the standard for 3D printed tissue engineering constructs is to provide a biomimetic structural environment that facilitates tissue formation and promotes host tissue integration (e.g., cellular infiltration, vascularization, and active remodeling). This review will cover several approaches that have advanced the field of 3D printing through novel fabrication methods of tissue engineering constructs. It will also discuss the applications of synthetic and natural materials for 3D printing facilitated tissue fabrication. PMID:26869728

  14. On the fly finger knuckle print authentication

    NASA Astrophysics Data System (ADS)

    Abe, Narishige; Shinzaki, Takashi

    2014-05-01

    Finger knuckle print authentication has been researched not only as a supplemental authentication modality to fingerprint recognition but also as a method for logging into a PC or entering a building. However, in previous works, some specific devices were necessary to capture a finger knuckle print and users had to keep their fingers perfectly still to capture their finger knuckle. In this paper, we propose a new on the fly finger knuckle print authentication system using a general web camera. In our proposed authentication system, users can input their finger knuckle prints without needing their hand to remain motionless during image capture. We also evaluate the authentication accuracy of the proposed system, achieving an 7% EER under best conditions.

  15. Cibachrome testing. [photographic processing and printing materials

    NASA Technical Reports Server (NTRS)

    Weinstein, M. S.

    1974-01-01

    The use of Cibachrome products as a solution to problems encountered when contact printing Kodak film type SO-397 onto Kodak Ektrachrome color reversal paper type 1993 is investigated. A roll of aerial imagery consisting of Kodak film types SO-397 and 2443 was contact printed onto Cibachrome and Kodak materials and compared in terms of color quality, resolution, cost, and compatibility with existing equipment and techniques. Objective measurements are given in terms of resolution and sensitometric response. Comparison prints and transparencies were viewed and ranked according to overall quality and aesthetic appeal. It is recommended that Cibachrome Print material be used in place of Kodak Ektachrome paper because it is more easily processed, the cost is equivalent, and it provides improved resolution, color quality, and image fade resistance.

  16. 3D-Printed Microfluidic Automation

    PubMed Central

    Au, Anthony K.; Bhattacharjee, Nirveek; Horowitz, Lisa F.; Chang, Tim C.; Folch, Albert

    2015-01-01

    Microfluidic automation – the automated routing, dispensing, mixing, and/or separation of fluids through microchannels – generally remains a slowly-spreading technology because device fabrication requires sophisticated facilities and the technology’s use demands expert operators. Integrating microfluidic automation in devices has involved specialized multi-layering and bonding approaches. Stereolithography is an assembly-free, 3D-printing technique that is emerging as an efficient alternative for rapid prototyping of biomedical devices. Here we describe fluidic valves and pumps that can be stereolithographically printed in optically-clear, biocompatible plastic and integrated within microfluidic devices at low cost. User-friendly fluid automation devices can be printed and used by non-engineers as replacement for costly robotic pipettors or tedious manual pipetting. Engineers can manipulate the designs as digital modules into new devices of expanded functionality. Printing these devices only requires the digital file and electronic access to a printer. PMID:25738695

  17. 3D Printed Multimaterial Microfluidic Valve

    PubMed Central

    Patrick, William G.; Sharma, Sunanda; Kong, David S.; Oxman, Neri

    2016-01-01

    We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to previous single material 3D printed valves that are stiff, these printed valves constrain fluidic deformation spatially, through combinations of stiff and flexible materials, to enable intricate geometries in an actuated, functionally graded device. Research presented marks a shift towards 3D printing multi-property programmable fluidic devices in a single step, in which integrated multimaterial valves can be used to control complex fluidic reactions for a variety of applications, including DNA assembly and analysis, continuous sampling and sensing, and soft robotics. PMID:27525809

  18. Plasma etchback of multilayer printed wiring boards

    SciTech Connect

    Gentry, F.L.

    1980-06-01

    Removal of epoxy smear and glass fiber protrusions in multilayer printed wiring board holes was investigated. Gas plasma techniques, using a mixture of carbon tetrafluoride and oxygen, removed the eposies; however, the glass fibers were not affected.

  19. Towards microscale electrohydrodynamic three-dimensional printing

    NASA Astrophysics Data System (ADS)

    He, Jiankang; Xu, Fangyuan; Cao, Yi; Liu, Yaxiong; Li, Dichen

    2016-02-01

    It is challenging for the existing three-dimensional (3D) printing techniques to fabricate high-resolution 3D microstructures with low costs and high efficiency. In this work we present a solvent-based electrohydrodynamic 3D printing technique that allows fabrication of microscale structures like single walls, crossed walls, lattice and concentric circles. Process parameters were optimized to deposit tiny 3D patterns with a wall width smaller than 10 μm and a high aspect ratio of about 60. Tight bonding among neighbour layers could be achieved with a smooth lateral surface. In comparison with the existing microscale 3D printing techniques, the presented method is low-cost, highly efficient and applicable to multiple polymers. It is envisioned that this simple microscale 3D printing strategy might provide an alternative and innovative way for application in MEMS, biosensor and flexible electronics.

  20. 3D-printed bioanalytical devices.

    PubMed

    Bishop, Gregory W; Satterwhite-Warden, Jennifer E; Kadimisetty, Karteek; Rusling, James F

    2016-07-15

    While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices. PMID:27250897

  1. Gender Balance Analysis of the Metropolitan Achievement Tests, 1978 Edition.

    ERIC Educational Resources Information Center

    Jensen, Marjane; Beck, Michael D.

    The 1978 edition of the Metropolitan Achievement Tests was analyzed for sex stereotyping and for the use of male, female, or neuter references and a comparison was made with the 1970 edition. There was less bias in the new edition, and there was relatively little sex stereotyping with respect to occupations, activities, and roles for females.…

  2. Annotated Bibliography on Offender Job Training and Placement. Second Edition.

    ERIC Educational Resources Information Center

    Clem, Constance, Ed.

    This second edition of an annotated bibliography on offender job training and placement lists nearly 400 items from the collection of the National Institute of Corrections (NIC) Information Center in Longmont, Colorado, including 85 items added since the first edition in 1997. Items new to this edition are marked with an asterisk. Citations have…

  3. Genetic Architecture of Mitochondrial Editing in Arabidopsis thaliana

    PubMed Central

    Bentolila, Stéphane; Elliott, Leah E.; Hanson, Maureen R.

    2008-01-01

    We have analyzed the mitochondrial editing behavior of two Arabidopsis thaliana accessions, Landsberg erecta (Ler) and Columbia (Col). A survey of 362 C-to-U editing sites in 33 mitochondrial genes was conducted on RNA extracted from rosette leaves. We detected 67 new editing events in A. thaliana rosette leaves that had not been observed in a prior study of mitochondrial editing in suspension cultures. Furthermore, 37 of the 441 C-to-U editing events reported in A. thaliana suspension cultures were not observed in rosette leaves. Forty editing sites that are polymorphic in extent of editing were detected between Col and Ler. Silent editing sites, which do not change the encoded amino acid, were found in a large excess compared to nonsilent sites among the editing events that differed between accessions and between tissue types. Dominance relationships were assessed for 15 of the most polymorphic sites by evaluating the editing values of the reciprocal hybrids. Dominance is more common in nonsilent sites than in silent sites, while additivity was observed only in silent sites. A maternal effect was detected for 8 sites. QTL mapping with recombinant inbred lines detected 12 major QTL for 11 of the 13 editing traits analyzed, demonstrating that efficiency of editing of individual mitochondrial C targets is generally governed by a major factor. PMID:17565941

  4. Soil Carbon Sequestration and the Greenhouse Effect (2nd Edition)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This volume is a second edition of the book “Soil Carbon Sequestration and The Greenhouse Effect”. The first edition was published in 2001 as SSSA Special Publ. #57. The present edition is an update of the concepts, processes, properties, practices and the supporting data. All chapters are new co...

  5. Administration of the Small Public Library. Fourth Edition.

    ERIC Educational Resources Information Center

    Weingand, Darlene E.

    Since the publication of its first edition in 1965, this book has been a standard resource for setting up and managing cutting-edge small public library facilities. Completely revised and updated, this fourth edition continues that tradition with many more figures (28 in this edition), case studies and sample policies, and new content on grant…

  6. The role of RNA editing in dynamic environments

    SciTech Connect

    Rocha, L. M.; Huang, C. F.

    2004-01-01

    This paper presents a computational methodology based on Genetic Algorithms with Genotype Editing (GAE) for investigating the role of RNA editing in dynamic environments. This model is constructed based on several genetic editing characteristics that are gleaned from the RNA editing system as observed in several organisms. We have previously expanded the traditional Genetic Algorithm (GA) with artificial editing mechanisms (Rocha, 1995, 1997), and studied the benefits of including straightforward Genotype Editing in GA for several machine learning problems (Huang and Rocha, 2003, 2004). We show that the incorporation of genotype editing provides a means for artificial agents with genetic descriptions to gain greater phenotypic plasticity. Artificial agents use genotype edition to their advantage by linking it to environmental context. The ability to link changes in the environment with editing parameters gives organisms an adaptive advantage as genotype expression can become contextually regulated. The study of this RNA editing model in changing environments has shed some light into the evolutionary implications of RNA editing. We expect that our methodology will both facilitate determining the evolutionary role of RNA editing in biology, and advance the current state of research in Evolutionary Computation and Artificial Life.

  7. Adenosine to Inosine editing frequency controlled by splicing efficiency.

    PubMed

    Licht, Konstantin; Kapoor, Utkarsh; Mayrhofer, Elisa; Jantsch, Michael F

    2016-07-27

    Alternative splicing and adenosine to inosine (A to I) RNA-editing are major factors leading to co- and post-transcriptional modification of genetic information. Both, A to I editing and splicing occur in the nucleus. As editing sites are frequently defined by exon-intron basepairing, mRNA splicing efficiency should affect editing levels. Moreover, splicing rates affect nuclear retention and will therefore also influence the exposure of pre-mRNAs to the editing-competent nuclear environment. Here, we systematically test the influence of splice rates on RNA-editing using reporter genes but also endogenous substrates. We demonstrate for the first time that the extent of editing is controlled by splicing kinetics when editing is guided by intronic elements. In contrast, editing sites that are exclusively defined by exonic structures are almost unaffected by the splicing efficiency of nearby introns. In addition, we show that editing levels in pre- and mature mRNAs do not match. This phenomenon can in part be explained by the editing state of an RNA influencing its splicing rate but also by the binding of the editing enzyme ADAR that interferes with splicing. PMID:27112566

  8. Human Resources Administration: A School-Based Perspective. Fourth Edition

    ERIC Educational Resources Information Center

    Smith, Richard

    2009-01-01

    Enhanced and updated, this Fourth Edition of Richard E. Smith's highly successful text examines the growing role of the principal in planning, hiring, staff development, supervision, and other human resource functions. The Fourth Edition includes new sections on ethics, induction, and the role of the mentor teacher. This edition also introduces…

  9. Genome-wide identification of RNA editing in hepatocellular carcinoma.

    PubMed

    Kang, Lin; Liu, Xiaoqiao; Gong, Zhoulin; Zheng, Hancheng; Wang, Jun; Li, Yingrui; Yang, Huanming; Hardwick, James; Dai, Hongyue; Poon, Ronnie T P; Lee, Nikki P; Mao, Mao; Peng, Zhiyu; Chen, Ronghua

    2015-02-01

    We did whole-transcriptome sequencing and whole-genome sequencing on nine pairs of Hepatocellular carcinoma (HCC) tumors and matched adjacent tissues to identify RNA editing events. We identified mean 26,982 editing sites with mean 89.5% canonical A→G edits in each sample using an improved bioinformatics pipeline. The editing rate was significantly higher in tumors than adjacent normal tissues. Comparing the difference between tumor and normal tissues of each patient, we found 7 non-synonymous tissue specific editing events including 4 tumor-specific edits and 3 normal-specific edits in the coding region, as well as 292 edits varying in editing degree. The significant expression changes of 150 genes associated with RNA editing were found in tumors, with 3 of the 4 most significant genes being cancer related. Our results show that editing might be related to higher gene expression. These findings indicate that RNA editing modification may play an important role in the development of HCC. PMID:25462863

  10. Standards of Good Practice for Education Abroad. Fourth Edition

    ERIC Educational Resources Information Center

    Forum on Education Abroad, 2011

    2011-01-01

    This fourth edition of the Forum on Education Abroad's "Standards of Good Practice for Education Abroad" augments previous editions of the "Standards." Since the last edition was published in 2008, Forum member institutions and organizations have implemented the Standards in program development and assessment, using the Standards in the Forum's…

  11. The Chloroplast Genome of Pellia endiviifolia: Gene Content, RNA-Editing Pattern, and the Origin of Chloroplast Editing

    PubMed Central

    Grosche, Christopher; Funk, Helena T.; Maier, Uwe G.; Zauner, Stefan

    2012-01-01

    RNA editing is a post-transcriptional process that can act upon transcripts from mitochondrial, nuclear, and chloroplast genomes. In chloroplasts, single-nucleotide conversions in mRNAs via RNA editing occur at different frequencies across the plant kingdom. These range from several hundred edited sites in some mosses and ferns to lower frequencies in seed plants and the complete lack of RNA editing in the liverwort Marchantia polymorpha. Here, we report the sequence and edited sites of the chloroplast genome from the liverwort Pellia endiviifolia. The type and frequency of chloroplast RNA editing display a pattern highly similar to that in seed plants. Analyses of the C to U conversions and the genomic context in which the editing sites are embedded provide evidence in favor of the hypothesis that chloroplast RNA editing evolved to compensate mutations in the first land plants. PMID:23221608

  12. The boundaries of partially edited transcripts are not conserved in kinetoplastids: implications for the guide RNA model of editing.

    PubMed Central

    Landweber, L F; Fiks, A G; Gilbert, W

    1993-01-01

    We have studied partially edited molecules for the cytochrome-c oxidase subunit III (COIII) transcript from two species of the insect trypanosome Herpetomonas. We found unexpected patterns of editing, in which editing does not proceed strictly 3' to 5', in 24 of 61 partially edited clones. A comparison of the partially edited molecules between the two kinetoplastid species revealed an 8- to 10-nt shift in precisely defined editing boundaries, sites at which editing pauses before binding of the next guide RNA after formation of a stable duplex between a guide RNA and mRNA. This suggests that the region of base pairing between individual guide RNAs and the COIII transcript is not strictly conserved in kinetoplastids, implying gradual evolution of the editing process. Images Fig. 2 Fig. 3 PMID:8415685

  13. Dispenser printed electroluminescent lamps on textiles for smart fabric applications

    NASA Astrophysics Data System (ADS)

    de Vos, Marc; Torah, Russel; Tudor, John

    2016-04-01

    Flexible electroluminescent (EL) lamps are fabricated onto woven textiles using a novel dispenser printing process. Dispenser printing utilizes pressurized air to deposit ink onto a substrate through a syringe and nozzle. This work demonstrates the first use of this technology to fabricate EL lamps. The luminance of the dispenser printed EL lamps is compared to screen-printed EL lamps, both printed on textile, and also commercial EL lamps on polyurethane film. The dispenser printed lamps are shown to have a 1.5 times higher luminance than the best performing commercially available lamp, and have a comparable performance to the screen-printed lamps.

  14. Contextual advertisement placement in printed media

    NASA Astrophysics Data System (ADS)

    Liu, Sam; Joshi, Parag

    2010-02-01

    Advertisements today provide the necessary revenue model supporting the WWW ecosystem. Targeted or contextual ad insertion plays an important role in optimizing the financial return of this model. Nearly all the current ads that appear on web sites are geared for display purposes such as banner and "pay-per-click". Little attention, however, is focused on deriving additional ad revenues when the content is repurposed for alternative mean of presentation, e.g. being printed. Although more and more content is moving to the Web, there are still many occasions where printed output of web content is desirable, such as maps and articles; thus printed ad insertion can potentially be lucrative. In this paper, we describe a contextual ad insertion network aimed to realize new revenue for print service providers for web printing. We introduce a cloud print service that enables contextual ads insertion, with respect to the main web page content, when a printout of the page is requested. To encourage service utilization, it would provide higher quality printouts than what is possible from current browser print drivers, which generally produce poor outputs, e.g. ill formatted pages. At this juncture we will limit the scope to only article-related web pages although the concept can be extended to arbitrary web pages. The key components of this system include (1) the extraction of article from web pages, (2) the extraction of semantics from article, (3) querying the ad database for matching advertisement or coupon, and (4) joint content and ad layout for print outputs.

  15. Flexible composite film for printed circuit board

    NASA Technical Reports Server (NTRS)

    Yabe, K.; Asakura, M.; Tanaka, H.; Soda, A.

    1982-01-01

    A flexible printed circuit for a printed circuit board in which layers of reaction product composed of a combination of phenoxy resin - polyisocyanate - brominated epoxy resin, and in which the equivalent ratio of those functional groups is hydroxyl group: isocyanate group: epoxy group - 1 : 0.2 to 2 : 0.5 to 3 are laminated on at least one side of saturated polyester film is discussed.

  16. A printed circuit cylindrical array antenna

    NASA Astrophysics Data System (ADS)

    Agrawal, Ashok K.; Powell, Walter E.

    1986-11-01

    The design and performance of a Ku-band cylindrical antenna are described. The antenna is designed to provide a 360-deg azimuth coverage with 20-dB sidelobes and an operating bandwidth of 1 GHz (16.0-17.0 GHz). The antenna consists of 16 facets of 2 x 4 dipole arrays. The 360-deg coverage is obtained with a switch matrix network. The antenna elements and the feeding switch matrix network are printed on a single printed circuit board.

  17. Printing highly efficient organic solar cells.

    PubMed

    Hoth, Claudia N; Schilinsky, Pavel; Choulis, Stelios A; Brabec, Christoph J

    2008-09-01

    The technological attraction in organic solar cells is their compatibility to printing processes. However, up to today, nearly no literature on "printed" organic solar cells have been published and the major body of the research work was done by spin coating or blading techniques. Transferring the spin-coating or doctor blading process currently used for the fabrication of bulk heterojunction solar cell to a printing process holds morphological challenges that have not been observed or reported up to today. We highlight these challenges and we show that inkjet printing of organic bulk heterojunction solar cells requires completely novel approaches and skill sets compared to the current state of the art. By adjusting the chemical properties of the poly(3-hexylthiophene) polymer donor and by using our recently developed inkjet solvent mixture, we have gained control over the nanomorphology of poly(3-hexylthiophene):fullerene blends during the printing process and report a new record power conversion efficiency of 3.5% for inkjet printed poly(3-hexylthiophene):fullerene based solar cells. PMID:18683989

  18. Electrohydrodynamic Printing on Flat and Uneven Surfaces

    NASA Astrophysics Data System (ADS)

    Maktabi, Sepehr; Chiarot, Paul

    2015-11-01

    In electronics manufacturing, the need for high resolution patterns can be met by generating fine droplets using materials printing techniques. Other desirable features are high print speeds, high frequency droplet generation, and large stand-off distances. In this work, an array of emission modes for a tunable electrohydrodynamic (EHD) printing method is reported. Among these, the promising microdripping mode generated droplets an order of magnitude smaller than the nozzle's inner diameter at a frequency range of 2-8 kHz. This method is applied to print organic resistors using the conductive ink poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS). They were printed on flat and uneven substrates at speeds up to 50 mm/s. They had a width from 50 to 500 um and resistance from 1 to 70 Ω/um. The effect of supply flow rate, applied voltage, stand-off distance, and target substrate material properties with respect to droplet generation frequency was investigated. Experimental results reveal that frequency increases nonlinearly with the applied voltage, which is strongly influenced by the non-Newtonian shear thinning effect of PEDOT:PSS. The topology of a 3-dimensional substrate is shown to have a significant effect on the structure and function of a printed resistor.

  19. Printed Multicolor High-Contrast Electrochromic Devices.

    PubMed

    Chen, Bo-Han; Kao, Sheng-Yuan; Hu, Chih-Wei; Higuchi, Masayoshi; Ho, Kuo-Chuan; Liao, Ying-Chih

    2015-11-18

    In this study, electrochemical responses of inkjet-printed multicolored electrochromic devices (ECD) were studied to evaluate the feasibility of presenting multiple colors in one ECD. Metallo-supramolecular polymers (MEPE) solutions with two primary colors were inkjet-printed on flexible electrodes. By digitally controlling print dosages of each species, the colors of the printed EC thin film patterns can be adjusted directly without premixing or synthesizing new materials. The printed EC thin films were then laminated with a solid transparent thin film electrolyte and a transparent conductive thin film to form an ECD. After applying a dc voltage, the printed ECDs exhibited great contrast with a transmittance change (ΔT) of 40.1% and a high coloration efficiency of 445 cm(2) C(-1) within a short darkening time of 2 s. The flexible ECDs also showed the same darkening time of 2 s and still had a high ΔT of 30.1% under bending condition. This study demonstrated the feasibility to fabricate display devices with different color setups by an all-solution process and can be further extended to other types of displays. PMID:26496422

  20. Microjet printing of anamorphic microlens arrays

    NASA Astrophysics Data System (ADS)

    Cox, Weldon R.; Chen, Ting; Ussery, Daryl W.; Hayes, Donald J.; Hoenigman, R. F.; MacFarlane, Duncan L.; Rabinovich, Emmanuil M.

    1996-03-01

    The microjet printing method of micro-optical element fabrication is being used to make arrays of high-performance hemi-elliptical and hemi-cylindrical microlenses for potential use in applications such as collimation of edge-emitting diode laser array beams. The printing method enables both the fabrication of very fast (e.g., f/0.75) microlenses and the potential for reducing costs and increasing flexibility in micro-optics manufacture. The process for fabricating anamorphic microlenses, including those of square or rectangular shape, involves the dispensing and placing of precisely sized microdroplets of optical material onto optical substrates, and then controlling their coalescence and solidification. By varying the number, diameter and spacing of adjacent microdroplets of optical materials deposited at elevated temperatures onto heated substrate, both the dimensional aspect ratios and the ratio of `fast'- to-`slow' focal lengths of a printed hemi-elliptical microlens may be varied over a very wide range. Arrays of hemi-elliptical and hemi-cylindrical microlenses on the order of 100 - 300 micrometers in width and 150 micrometers to 20 mm long, with focal length ratios (fast/slow) from 1 (circular) to 0 (cylindrical), have been printed. A model for predicting printed hemi-elliptical microlens focal lengths from printed lenslet geometry is illustrated, along with an interferometric method of detecting lenslet defects and aberrations.

  1. Inkjet printed microlens array on patterned substrate

    NASA Astrophysics Data System (ADS)

    Vilmi, P.; Myllylä, R.; Fabritius, T.

    2013-03-01

    Micro lens arrays (MLA) can be utilized in various applications of light sensitive devices such as digital cameras or objective free microscopes, and 3D imaging because of their good light collection efficiencies. Many of the fabrication methods used today require heat or expensive equipment or molds and that is why there is a need for a simple and cost effective fabrication method for MLAs. An inkjet printing based production method for low-cost micro lenses is presented here. By pre-patterning the used substrate the printing accuracy and the shape of the lenses is improved. The surface patterning is done with photolithography to fabricate round, shallow reservoirs for the lenses to be printed in. The liquid lens material is then inkjet printed into them. The pattern edges prevent the spreading of the ink outside the wanted area increasing the tolerance for printing inaccuracy and resulting to the uniform array of micro lenses. By depositing the ink to the reservoir, the ink forms a convex surface a.k.a. a lens. The used lens material is negative photoresist, so after printing it is cured with UV-light and baked in a hot plate to solidify the lens matrix. By placing different amount of ink in a reservoir the height of the lenses changes and thus the focus of the lens can be adjusted making the proposed method versatile tool for MLA fabrication.

  2. Three-Dimensional Printing Surgical Applications

    PubMed Central

    Griffin, Michelle F.; Butler, Peter E.

    2015-01-01

    Introduction: Three-dimensional printing, a technology used for decades in the industrial field, gains a lot of attention in the medical field for its potential benefits. With advancement of desktop printers, this technology is accessible and a lot of research is going on in the medical field. Objective: To evaluate its application in surgical field, which may include but not limited to surgical planning, surgical education, implants, and prosthesis, which are the focus of this review. Methods: Research was conducted by searching PubMed, Web of science, and other reliable sources. We included original articles and excluded articles based on animals, those more than 10 years old, and those not in English. These articles were evaluated, and relevant studies were included in this review. Discussion: Three-dimensional printing shows a potential benefit in surgical application. Printed implants were used in patient in a few cases and show successful results; however, longer follow-up and more trials are needed. Surgical and medical education is believed to be more efficient with this technology than the current practice. Printed surgical instrument and surgical planning are also believed to improve with three-dimensional printing. Conclusion: Three-dimensional printing can be a very powerful tool in the near future, which can aid the medical field that is facing a lot of challenges and obstacles. However, despite the reported results, further research on larger samples and analytical measurements should be conducted to ensure this technology's impact on the practice. PMID:26301002

  3. Direct Numerical Simulation of Cell Printing

    NASA Astrophysics Data System (ADS)

    Qiao, Rui; He, Ping

    2010-11-01

    Structural cell printing, i.e., printing three dimensional (3D) structures of cells held in a tissue matrix, is gaining significant attention in the biomedical community. The key idea is to use desktop printer or similar devices to print cells into 3D patterns with a resolution comparable to the size of mammalian cells, similar to that in living organs. Achieving such a resolution in vitro can lead to breakthroughs in areas such as organ transplantation and understanding of cell-cell interactions in truly 3D spaces. Although the feasibility of cell printing has been demonstrated in the recent years, the printing resolution and cell viability remain to be improved. In this work, we investigate one of the unit operations in cell printing, namely, the impact of a cell-laden droplet into a pool of highly viscous liquids using direct numerical simulations. The dynamics of droplet impact (e.g., crater formation and droplet spreading and penetration) and the evolution of cell shape and internal stress are quantified in details.

  4. Cell Source for Tissue and Organ Printing

    NASA Astrophysics Data System (ADS)

    Xu, Tao; Yuan, Yuyu; Yoo, James J.

    Organ printing, a novel approach in tissue engineering, applies computer-driven deposition of cells, growth factors, biomaterials layer-by-layer to create complex 3D tissue or organ constructs. This emerging technology shows great promise in regenerative medicine, because it may help to address current crisis of tissue and organ shortage for transplantation. Organ printing is developing fast, and there are exciting new possibilities in this area. Successful cell and organ printing requires many key elements. Among these, the choice of appropriate cells for printing is vital. This chapter surveys available cell sources for cell and organ printing application and discusses factors that affect cell choice. Special emphasis is put on several important factors, including the proposed printing system and bioprinters, the assembling method, and the target tissues or organs, which need to be considered to select proper cell sources and cell types. In this chapter, characterizations of the selected cells to justify and/or refine the cell selection will also be discussed. Finally, future prospects in this field will be envisioned.

  5. An Active Approach to Hindi (Temporary Edition).

    ERIC Educational Resources Information Center

    Sharma, D.N.; Stone, James W.

    This preliminary edition of the Foreign Service Institute's text in elementary Hindi is intended to "make it possible for students to begin using Hindi, from the first hour of class, to obtain information and exchange opinions about topics which are important to them." It is based on Stevick's "Microwave" style of lesson organization, which…

  6. The Academic Job Search Handbook. Third Edition.

    ERIC Educational Resources Information Center

    Heiberger, Mary Morris; Vick, Julia Miller

    This handbook provides specific advice on all aspects of job-seeking in an increasingly tight academic market, from the timetable for the application process through seeking tenure. New material in this edition provides more information for candidates in scientific and technical fields and more advice for those applying to technical and community…

  7. Populations. Basic Edition. Science for Micronesia.

    ERIC Educational Resources Information Center

    Trust Territory of the Pacific Islands Dept. of Education, Saipan.

    This teacher's guide is for an elementary school science unit designed for use with third grade (or older) children in the Trust Territory of Micronesia. Although there is a degree of similarity to curriculum materials developed for the Science Curriculum Improvement Study, this Micronesian unit does not purport to be an adaptation or edition of…

  8. Regression Analysis by Example. 5th Edition

    ERIC Educational Resources Information Center

    Chatterjee, Samprit; Hadi, Ali S.

    2012-01-01

    Regression analysis is a conceptually simple method for investigating relationships among variables. Carrying out a successful application of regression analysis, however, requires a balance of theoretical results, empirical rules, and subjective judgment. "Regression Analysis by Example, Fifth Edition" has been expanded and thoroughly…

  9. Part C Updates. 10th Edition

    ERIC Educational Resources Information Center

    Goode, Sue; Lazara, Alex; Danaher, Joan

    2008-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the tenth volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  10. Enriching Student Teaching Relationships. Supervising Teacher Edition.

    ERIC Educational Resources Information Center

    Clothier, Grant; Kingsley, Elizabeth

    This training series was developed to improve the working relationships between supervising teachers and their student teachers. This supervising teacher's edition contains suggestions for such teachers as regards various activities dealing with the supervising/teaching situation, behavior problems, change, conference sessions, communication,…

  11. Introduction to Energy - 2nd Edition

    NASA Astrophysics Data System (ADS)

    Cassedy, Edward S.; Grossman, Peter Z.

    1998-12-01

    Energy issues such as pollution, resource depletion, global warming, nuclear power and waste are problems that demand timely solutions. This book provides a critical examination of the resources, market forces, and social impacts of modern energy production. The book addresses the dilemmas that have arisen due to society's crucial dependence on energy, particularly fossil fuels, and explores the available alternative energy producing technologies. The second edition has increased emphasis on those issues at the forefront of the current energy debate: energy sustainability, climate change, and the radical restructuring of the power industry due to de-regulation. Assuming no prior technical expertise and avoiding complex mathematical formulation, it is directed at a broad readership. The second edition will follow the first in proving especially useful as a textbook for undergraduate programs in Science, Technology and Society (STS), and as a supplementary text in a variety of courses which touch upon energy studies, including environmental and technology policy, environmental, mineral and business law, energy and resource economics. Fully updated second edition of successful first edition that was adopted on Science, Technology and Society courses Provides a critical examination of all aspects of modern energy production for non-technical readers For a broad readership from a variety of backgrounds

  12. The Complete Learning Disabilities Directory, 2007 Edition

    ERIC Educational Resources Information Center

    Grey House Publishing, 2006

    2006-01-01

    This is the thirteenth edition of the most comprehensive reference book covering the wide range of learning disabilities resources available nationwide. This directory contains well over 7,000 entries and covers the schools, learning centers, vocational training programs, associations and organizations, and government agencies involved in learning…

  13. Collecting and Interpreting Qualitative Materials. Third Edition

    ERIC Educational Resources Information Center

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book is the third volume of the paperback versions of "The SAGE Handbook of Qualitative Research, Third Edition." This portion of the handbook considers the tasks of collecting, analyzing, and interpreting empirical materials, and comprises the Handbook's Parts IV ("Methods of Collecting and Analyzing Empirical Materials") and V ("The Art and…

  14. Handbook of Qualitative Research. Second Edition.

    ERIC Educational Resources Information Center

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    This handbook's second edition represents the state of the art for the theory and practice of qualitative inquiry. It features eight new topics, including autoethnography, critical race theory, applied ethnography, queer theory, and "testimonio"every chapter in the handbook has been thoroughly revised and updated. The book contains:"Preface" (1…

  15. Marching to Different Drummers. 2nd Edition.

    ERIC Educational Resources Information Center

    Guild, Pat Burke; Garger, Stephen

    First published in 1985, this revised edition focuses on diversity in education, exploring differences in style to help educators better fulfill their responsibilities and assist people in realizing their potential. Among the new chapters are a discussion of the importance of knowledge about students' culture, learning styles in light of recent…

  16. Guide to Productivity Improvement Projects. Third Edition.

    ERIC Educational Resources Information Center

    International City Management Association, Washington, DC.

    This edition features over 400 projects that have effected cost savings and/or improved services in a broad range of functional areas of city management, a jurisdictional index as well as a topical index, in-depth reports on selected projects, and project description forms that readers can use to share their successful projects with other readers.…

  17. Grants for Higher Education. 2012 Digital Edition

    ERIC Educational Resources Information Center

    Foundation Center, 2011

    2011-01-01

    This publication is only available as a downloadable file. See who's giving and getting grants in your field. Strengthen your search for funds with the Foundation Center's digital edition of "Grants for Higher Education." This new "Grant Guide" reveals the scope of current foundation giving in the field. You'll find descriptions of 19,705 grants…

  18. Grants for Children & Youth--2012 Digital Edition

    ERIC Educational Resources Information Center

    Foundation Center, 2011

    2011-01-01

    This publication is only available as a downloadable file. See who's giving and getting grants in your field. Strengthen your search for funds with the Foundation Center's digital edition of "Grants for Children & Youth." This new "Grant Guide" reveals the scope of current foundation giving in the field. You'll find descriptions of 37,992 grants…

  19. Grants for Employment--2012 Digital Edition

    ERIC Educational Resources Information Center

    Foundation Center, 2011

    2011-01-01

    This publication is only available as a downloadable file. See who's giving and getting grants in your field. Strengthen your search for funds with the Foundation Center's digital edition of "Grants for Employment." This new "Grant Guide" reveals the scope of current foundation giving in the field. You'll find descriptions of 4,129 grants of…

  20. Researching Society and Culture. Third Edition

    ERIC Educational Resources Information Center

    Seale, Clive, Ed.

    2012-01-01

    Clear, coherent and trusted, this book is the perfect guide to the main social research methods in use today. The much anticipated Third Edition of Clive Seale's bestselling title further expands its coverage to provide an authoritative introduction to all of the social research methods used to analyze qualitative and quantitative data. Written by…

  1. Compact Geography of the Netherlands. (Third Edition).

    ERIC Educational Resources Information Center

    Information and Documentation Centre for the Geography of the Netherlands, Utrecht.

    This document presents information on the physical and human geography of the Netherlands. In this third revised edition, the contents have been brought up-to-date and expanded. In addition, sections on physical planning and environmental problems have been added. The booklet is intended for use by geography classroom teachers and students at…

  2. More Than A Native Speaker, Revised Edition

    ERIC Educational Resources Information Center

    Snow, Don, Ed.

    2006-01-01

    This revised edition includes an expanded discussion of student-directed language learning, workbook activities for volunteer teachers enrolled in courses or studying the book individually, and a full array of culture-based discussion topics for use as supplementary activities or core material for an English course. The book includes 16 chapters.…

  3. Positive Behavior Support Training Curriculum. Second Edition

    ERIC Educational Resources Information Center

    Reid, Dennis H.; Parsons, Marsha B.

    2007-01-01

    The American Association on Intellectual and Developmental Disabilities' (AAIDD's) Positive Behavior Support Training Curriculum," Second Edition" ("PBSTC"), is a curriculum for training direct support personnel and their supervisors in the values and practices of Positive Behavior Support. The curriculum is designed for direct support persons and…

  4. The WRITEACOURSE Language: Programming Manual. Revised Edition.

    ERIC Educational Resources Information Center

    Zosel, Mary; And Others

    WRITEACOURSE is a programing language for man-computer interactions. It was originally designed for writing computer assisted instruction courses, but it can also be used to control a remote terminal in a variety of applications which involve display and editing of characters. It is not suited for applications which use the computer as an…

  5. 10 Tempting Image-Editing Tasks

    ERIC Educational Resources Information Center

    Guhin, Paula

    2009-01-01

    Asking students to manipulate digital photos on the computer is one of the easiest ways the author knows to engage their attention. It's fabulous fun for them and a great teaching tool for educators. In this article, the author presents 10 ways to impress students with image-editing software. These are: (1) filters are fascinating; (2) get a move…

  6. Designing Effective Instruction. 5th Edition

    ERIC Educational Resources Information Center

    Morrison, Gary R.; Ross, Steven M.; Kemp, Jerrold E.

    2006-01-01

    This valuable resource provides instructional designers with the guidance they need to meet the challenge of creating effective and efficient instruction. Maintaining a careful balance between theory and application, the Fifth Edition presents a practical, easy-to-follow approach to instructional design that can be applied to K-12 classrooms,…

  7. Media Research Techniques. 2nd Edition.

    ERIC Educational Resources Information Center

    Berger, Arthur Asa

    Suggesting it is a good idea for students to try their hands at doing media research themselves, this book presents a number of research projects that students will find interesting and that they can do with minimum experience in a limited amount of time. The second edition has added chapters on experimentation, historical research, comparative…

  8. The Art of Electronics - 2nd Edition

    NASA Astrophysics Data System (ADS)

    Horowitz, Paul; Hill, Winfield

    1989-09-01

    This is the thoroughly revised and updated second edition of the hugely successful The Art of Electronics. Widely accepted as the single authoritative text and reference on electronic circuit design, both analog and digital, the original edition sold over 125,000 copies worldwide and was translated into eight languages. The book revolutionized the teaching of electronics by emphasizing the methods actually used by citcuit designers - a combination of some basic laws, rules to thumb, and a large nonmathematical treatment that encourages circuit values and performance. The new Art of Electronics retains the feeling of informality and easy access that helped make the first edition so successful and popular. It is an ideal first textbook on electronics for scientists and engineers and an indispensable reference for anyone, professional or amateur, who works with electronic circuits. The best self-teaching book and reference book in electronics Simply indispensable, packed with essential information for all scientists and engineers who build electronic circuits Totally rewritten chapters on microcomputers and microprocessors The first edition of this book has sold over 100,000 copies in seven years, it has a market in virtually all research centres where electronics is important

  9. Does Money Matter in Education? Second Edition

    ERIC Educational Resources Information Center

    Baker, Bruce D.

    2016-01-01

    This second edition policy brief revisits the long and storied literature on whether money matters in providing a quality education. It includes research released since the original brief in 2012 and covers a handful of additional topics. Increasingly, political rhetoric adheres to the unfounded certainty that money does not make a difference in…

  10. PIRLS 2016 Assessment Framework. 2nd Edition

    ERIC Educational Resources Information Center

    Mullis, Ina V. S., Ed.; Martin, Michael O., Ed.

    2015-01-01

    The "PIRLS 2016 Assessment Framework, 2nd Edition" provides the foundation for the three international assessments planned as part of the International Association for the Evaluation of Educational Achievement's Progress in International Reading Literacy Study (PIRLS) 2016: PIRLS, PIRLS Literacy, and ePIRLS. PIRLS represents the…

  11. Television and the American Family. Second Edition.

    ERIC Educational Resources Information Center

    Bryant, Jennings, Ed.; Bryant, J. Alison, Ed.

    Noting drastic changes in both television and the family since the 1990 edition, this revised volume provides an extensive consideration of television's role in the American family, from the uses families make of television and how extensions such as remote controls and VCRs affect usage, to the meanings families have for television, families'…

  12. An ADHD Primer. 2nd Edition

    ERIC Educational Resources Information Center

    Weyandt, Lisa L.

    2007-01-01

    Filled with current, practical, and useful information for professionals and individuals, this second edition summarizes the literature concerning ADHD across the lifespan. It offers a better understanding of the disorder by addressing the potential causes of ADHD, the developmental course, and numerous treatment approaches. The author delivers…

  13. A Snapshot of Photo Editing Options

    ERIC Educational Resources Information Center

    Bolkan, J.V.

    2004-01-01

    Plenty of digital imaging professionals claim that Adobe's Photoshop CS is the best photo editing application money can buy. This document reviews Adobe's Photoshop CS and its worthy competitors. In addition to Adobe, the following programs are reviewed in this document: (1) Adobe Photoshop Elements 2.0; (2) Arcsoft PhotoImpression; (3) Jasc Paint…

  14. Ladybugs of South Dakota, 2nd edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Images of the 80 species of Coccinellidae, commonly known as lady beetles, that occur in South Dakota are presented in taxonomic order. The second edition updates information, including the addition of a species new to South Dakota. Information on each species includes genus-species name, sub-fami...

  15. Total Quality Management in Education. Second Edition.

    ERIC Educational Resources Information Center

    Sallis, Edward

    Quality is at the top of most agendas, and improving quality is probably the most important task facing any institution. In addition, quality is difficult to define or measure. This book, the second edition of "Total Quality Management in Education," introduces the key concepts of Total Quality Management (TQM) and demonstrates how they can be put…

  16. Children, Play, and Development. Fourth Edition

    ERIC Educational Resources Information Center

    Hughes, Fergus P.

    2010-01-01

    Children, Play, and Development, Fourth Edition, discusses the relationship of play to the physical, social, intellectual, and emotional growth of the child. Author Fergus P. Hughes focuses on the historical, sociocultural, and ethological context of play; the role of development in play; and the wide range of theories that provide a framework for…

  17. Brief Articles for Latino Parents, 1999 Edition.

    ERIC Educational Resources Information Center

    ERIC Clearinghouse on Rural Education and Small Schools, Charleston, WV.

    This packet contains six briefs developed specifically for Spanish-speaking Latino parents, and English translations of the briefs. These briefs state what researchers and practitioners have learned about various ways parents can help their children do well in school. Earlier editions of brief articles for parents have been used in various ways by…

  18. Engineered Viruses as Genome Editing Devices

    PubMed Central

    Chen, Xiaoyu; Gonçalves, Manuel A F V

    2016-01-01

    Genome editing based on sequence-specific designer nucleases, also known as programmable nucleases, seeks to modify in a targeted and precise manner the genetic information content of living cells. Delivering into cells designer nucleases alone or together with donor DNA templates, which serve as surrogate homologous recombination (HR) substrates, can result in gene knockouts or gene knock-ins, respectively. As engineered replication-defective viruses, viral vectors are having an increasingly important role as delivery vehicles for donor DNA templates and designer nucleases, namely, zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and clustered, regularly interspaced, short palindromic repeats (CRISPR)-associated Cas9 (CRISPR−Cas9) nucleases, also known as RNA-guided nucleases (RGNs). We review this dual role played by engineered viral particles on genome editing while focusing on their main scaffolds, consisting of lentiviruses, adeno-associated viruses, and adenoviruses. In addition, the coverage of the growing body of research on the repurposing of viral vectors as delivery systems for genome editing tools is complemented with information regarding their main characteristics, pros, and cons. Finally, this information is framed by a concise description of the chief principles, tools, and applications of the genome editing field as a whole. PMID:26336974

  19. A Dictionary of American Idioms. Third Edition.

    ERIC Educational Resources Information Center

    Makkai, Adam; And Others

    This revised, updated, and expanded edition defines more than 8000 idiomatic words and phrases of American English. Each alphabetical entry has a grammatical explanation and an example sentence. The dictionary, which includes a preface in nine different languages, is a tool to help increase fluency in English for students, business travelers, and…

  20. Needed Research in Business Education. Sixth Edition.

    ERIC Educational Resources Information Center

    Rader, Martha H.; Wilhelm, William J.

    Areas of business education that need to be researched were identified through a two-round study. First, 2 groups of more than 40 Delta Pi Epsilon members generated ideas for research topics at regional and national conferences. The resulting list of topics was edited and rated by a Delphi panel consisting of 15 educators from postsecondary and…

  1. Medication Administration Technician. Update. Teacher Edition.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This teacher's edition contains curriculum materials for an upgrading course for medication administration technicians who have completed initial training. The course consists of six units of instruction that cover the following: (1) controlling infection; (2) administering medication; (3) obtaining vital signs; (4) discussing legal issues and…

  2. Greenhouse Management and Operations. Teacher Edition.

    ERIC Educational Resources Information Center

    Gowdy, Mary Ann Schwartz

    This document is the teacher's edition of a module containing 16 instructional units covering competencies for students with career aspirations in horticulture. It is designed to provide high school students with an in-depth perspective of both the technical and the commercial aspects of running a greenhouse. The 16 units cover the following…

  3. The Complete Learning Disabilities Directory. 2011 Edition

    ERIC Educational Resources Information Center

    Grey House Publishing, 2010

    2010-01-01

    Published for over a decade, this directory continues to be a successful, sought-after resource, providing valuable information to professionals, families, and individuals in the learning disabilities community. Supported by the National Center for Learning Disabilities, this 2011 edition brings together the most up-to-date information on LD…

  4. Case Studies for Inclusive Schools. Second Edition

    ERIC Educational Resources Information Center

    Anderson, Peggy L.

    2005-01-01

    Case Studies for "Inclusive Schools, Second Edition" presents a sampling of case studies that contain realistic problems concerning inclusion issues for teacher education students to solve. This format was chosen because the case study approach to learning is gaining in popularity as it provides students with an opportunity to apply information…

  5. Writing in the Content Areas. Second Edition

    ERIC Educational Resources Information Center

    Benjamin, Amy

    2005-01-01

    Do you spend entirely too much time correcting your students' papers? Do your students' essays and term papers take side trips to nowhere? Is their writing riddled with mechanical errors? Do their lab reports and essays lack specificity and clarity? Writing in the Content Areas, Second Edition is for middle and high school content area teachers…

  6. ETC 408/508: Technical Editing

    ERIC Educational Resources Information Center

    Charlton, Michael

    2013-01-01

    The course will focus on the role of the editor in organizational settings, including creating successful writer/editor collaboration. Students will gain practice in editing documents for grammar, syntax, organization, style, emphasis, document design, graphics, and user-centered design. The course will provide an introduction to technology for…

  7. ETC 408/508: Technical Editing

    ERIC Educational Resources Information Center

    Charlton, Michael

    2013-01-01

    ETC 408/508: Technical Editing is a cross-listed undergraduate and graduate course at Missouri Western State University, an open admissions public university with approximately 6,000 students. 508 is an elective course for students in the Master of Applied Arts in Written Communication degree and highly recommended for those in the Technical…

  8. Teachers and the Law. Sixth Edition.

    ERIC Educational Resources Information Center

    Fischer, Louis; Schimmel, David; Stellman, Leslie

    This book is about teachers and the laws that affect them. New to this sixth edition are new court cases and a chapter that highlights likely controversies in the coming years, including school choice, high-stakes testing, control of the Internet, and gang clothing. The book is divided into two parts. Part I, "The Legal Aspects of Teaching,"…

  9. The NMC Horizon Report: 2013 Museum Edition

    ERIC Educational Resources Information Center

    Johnson, L.; Adams Becker, S.; Freeman, A.

    2013-01-01

    The "NMC Horizon Report: 2013 Museum Edition," is a co-production with the Marcus Institute for Digital Education in the Arts (MIDEA), and examines six emerging technologies for their potential impact on and use in education and interpretation within the museum environment: BYOD (Bring Your Own Device), crowdsourcing, electronic…

  10. School Safety. Communique Special Edition, Fall 1996.

    ERIC Educational Resources Information Center

    National Association of School Psychologists, Washington, DC.

    "Communique" is the "official newsletter of the National Association of School Psychologists" (NASP). This "Special Edition" of "Communique" is a compilation of twelve previously-published articles/pieces all of which touch on the theme of "School Safety." Articles in this issue include (1) "Creating Systemic Change: A Psychologist and Principal…

  11. Literature for Today's Young Adults. Second Edition.

    ERIC Educational Resources Information Center

    Nilsen, Alleen Pace; Donelson, Kenneth L.

    Reflecting the rapid changes that have occurred in young adult literature, this second edition provides teachers with the history and background needed to stay current with what adolescents are reading and how such literature can be taught. The book is organized much as a literature course is taught: first, an introduction to young adults and…

  12. Literature for Today's Young Adults. Fourth Edition.

    ERIC Educational Resources Information Center

    Nilsen, Alleen Pace; Donelson, Kenneth L.

    Designed to help teachers open young minds to literature, this book presents criteria for evaluating books in all genres and their suggested classroom uses, an examination of hotly debated topics, and an overview of the significance of young adult literature. The fourth edition of the book features 30 boxed inserts containing essays by some of the…

  13. College Student Press Law. Second Edition.

    ERIC Educational Resources Information Center

    Trager, Robert; Dickerson, Donna L.

    This second edition of a monograph provides updated information on court decisions concerning college student publications and underground newspapers to acquaint advisers, administrators, and students with college student press law. Chapters of the monograph examine freedom of speech on the college campus; the relationship between colleges and…

  14. Editing Distance Education Materials. Knowledge Series.

    ERIC Educational Resources Information Center

    Swales, Christine

    Distance education (DE) materials take a learner-centered approach rather than the traditionally content-centered approach of textbooks. This fact has several implications for the editing of DE materials. The role of the editor within the DE organization will depend on the organization's size and structure. The basic features of the DE program or…

  15. Kids & Family Reading Report™. 5th Edition

    ERIC Educational Resources Information Center

    Scholastic Inc., 2015

    2015-01-01

    This report presents the 5th Edition of Scholastic's biannual study of children's and parents' attitudes and behaviors about reading. The latest research touches on reading aloud to children of all ages, the impact of reading independently for fun at school and at home, the importance of frequent reading, and the books children want most to read.…

  16. Making Classroom Assessment Work. Third Edition

    ERIC Educational Resources Information Center

    Davies, Anne

    2011-01-01

    3rd Edition! When should we assess, and when should we evaluate? What might be the results of evaluating too early or too much? How do we know if we are evaluating the right things? How do we know what makes sense for the learner and for the course? These questions are at the heart of "Making Classroom Assessment Work." This book combines powerful…

  17. Part C Updates. 11th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2010-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the eleventh volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  18. Health Activities Project (HAP), Trial Edition II.

    ERIC Educational Resources Information Center

    Buller, Dave; And Others

    Contained within this Health Activities Project (HAP) trial edition (set II) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into a Synopsis, Health Background, Materials, Setting Up, and Activities…

  19. Computing Services Writing and Editing Standards

    SciTech Connect

    Caruthers, C.; Heiberger, A.

    1985-08-01

    This report provides information that will enable writers to produce better documents consistent with Computing Services standards in less time. This document provides advice for organizing and writing technical information clearly and concisely, and it explains Computing Services usage standards. Applying the principles in this document will speed the writing, editing, review, and revision process in Computing Services.

  20. BOOK REVIEW: ENVIRONMENTAL ENGINEERING, 5TH EDITION

    EPA Science Inventory

    Book Review of Environmental Engineering, 5th Edition (Joseph A. Salvato, Nelson L. Nemerow, Franklin J. Agardy (Editors), John Wiley and Sons, Inc. Hoboken, New Jersey. 2003.). Author wrote review per the request of the Editor-in-Chief of the Journal of Environmental Quality.

  1. Career Choice and Development. Third Edition.

    ERIC Educational Resources Information Center

    Brown, Duane; And Others

    This book contains 12 papers examining established and newly emerging theories of career choice and development. Following prefaces to the third, second, and first editions by Duane Brown and Linda Brooks, the following papers are included: "Introduction to Theories of Career Development and Choice: Origins, Evolution, and Current Efforts" (Duane…

  2. Effective Literacy Instruction, K-8. Fourth Edition.

    ERIC Educational Resources Information Center

    Leu, Donald J., Jr.; Kinzer, Charles K.

    Systematically integrating technology with accepted practices for teaching reading in a balanced literacy education program, this book helps to develop insightful teachers empowered to make thoughtful decisions about reading instruction. Updated and extensively revised with new material throughout, this fourth edition features a balanced…

  3. How To Integrate the Curricula. Second Edition.

    ERIC Educational Resources Information Center

    Fogarty, Robin

    This second edition of a book on integrating the curriculum calls the driving force behind integrated curricula the "four winds of change": theorists, educators, parents, and students who demand a curriculum that will apply research on how the brain works, address standards, support lifelong learning, center on the student, and offer meaningful…

  4. Engineered Viruses as Genome Editing Devices.

    PubMed

    Chen, Xiaoyu; Gonçalves, Manuel A F V

    2016-03-01

    Genome editing based on sequence-specific designer nucleases, also known as programmable nucleases, seeks to modify in a targeted and precise manner the genetic information content of living cells. Delivering into cells designer nucleases alone or together with donor DNA templates, which serve as surrogate homologous recombination (HR) substrates, can result in gene knockouts or gene knock-ins, respectively. As engineered replication-defective viruses, viral vectors are having an increasingly important role as delivery vehicles for donor DNA templates and designer nucleases, namely, zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and clustered, regularly interspaced, short palindromic repeats (CRISPR)-associated Cas9 (CRISPR-Cas9) nucleases, also known as RNA-guided nucleases (RGNs). We review this dual role played by engineered viral particles on genome editing while focusing on their main scaffolds, consisting of lentiviruses, adeno-associated viruses, and adenoviruses. In addition, the coverage of the growing body of research on the repurposing of viral vectors as delivery systems for genome editing tools is complemented with information regarding their main characteristics, pros, and cons. Finally, this information is framed by a concise description of the chief principles, tools, and applications of the genome editing field as a whole. PMID:26336974

  5. Handbook of Infant Mental Health. Second Edition.

    ERIC Educational Resources Information Center

    Zeanah, Charles H., Jr., Ed.

    This revised edition offers an interdisciplinary analysis of the developmental, clinical, and social aspects of mental health from birth to age 3. Chapters are organized into five areas, covering the context of mental health, risk and protective factors, assessment, psychopathology, intervention, and applications of infant mental health. The…

  6. Schools without Drugs. What Works. Revised Edition.

    ERIC Educational Resources Information Center

    Department of Education, Washington, DC.

    This revised edition focuses on the prevention of drug use among school students, with increased attention to alcohol, tobacco, and steroids. The handbook, which begins with an introduction by Secretary of Education, Lauro F. Cavazos, provides new information about the effects of alcohol on young people; statistics on the harm it causes; and…

  7. Group Counseling: Concepts and Procedures. Third Edition.

    ERIC Educational Resources Information Center

    Berg, Robert C.; Landreth, Garry L.; Fall, Kevin A.

    This third edition is designed to be used as a primary source for traditional courses in group counseling. Providing a thorough discussion of the rationale for using group counseling, this book examines the differing approaches of each author to group counseling, outlines practical suggestions on the skills needed for effective facilitation of…

  8. Health Education Teaching Ideas: Secondary. Revised Edition.

    ERIC Educational Resources Information Center

    Loya, Richard, Ed.; Bensley, Loren B., Jr., Ed.

    Part I of this teaching guide contains teaching strategies which originally appeared in the "Journal of Health Education" (JHE) and were included in the first edition of this guide, published in 1983. Part II includes teaching strategies published in JHE since 1983. The guide is designed to be a reference for those seeking workable ideas in…

  9. A Model for Flexibly Editing CSCL Scripts

    ERIC Educational Resources Information Center

    Sobreira, Pericles; Tchounikine, Pierre

    2012-01-01

    This article presents a model whose primary concern and design rationale is to offer users (teachers) with basic ICT skills an intuitive, easy, and flexible way of editing scripts. The proposal is based on relating an end-user representation as a table and a machine model as a tree. The table-tree model introduces structural expressiveness and…

  10. Best Practices in Literacy Instruction. Third Edition

    ERIC Educational Resources Information Center

    Gambrell, Linda B., Ed.; Morrow, Lesley Mandel, Ed.; Pressley, Michael, Ed.; Guthrie, John T., Ed.

    2006-01-01

    Now in a thoroughly revised and expanded third edition, this evidence-based book distills the latest knowledge about literacy teaching and learning into clear strategies for helping all children succeed. Within a comprehensive conceptual framework, the field's leading authorities provide eminently practical recommendations to guide instructional…

  11. The Landscape of Qualitative Research. Third Edition

    ERIC Educational Resources Information Center

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book, the first volume of the paperback versions of the "The SAGE Handbook of Qualitative Research, Third Edition," takes a look at the field from a broadly theoretical perspective, and is composed of the Handbook's Parts I ("Locating the Field"), II ("Major Paradigms and Perspectives"), and VI ("The Future of Qualitative Research"). "The…

  12. Academic Skills Problems Workbook. Revised Edition

    ERIC Educational Resources Information Center

    Shapiro, Edward S.

    2004-01-01

    An ideal companion to "Academic Skills Problems, Third Edition," this user-friendly workbook offers numerous opportunities for practicing and mastering direct assessment and intervention procedures. Practice exercises and forms--some of which are reprinted from the text--are presented in a convenient 8 1/2" x 11" format with permission to…

  13. Critical Social Theories. 2nd Edition

    ERIC Educational Resources Information Center

    Agger, Ben

    2006-01-01

    Praised for its clarity and accessibility, this fully updated edition of "Critical Social Theories" presents a comprehensive analysis of leading social and cultural theories today. Diverse perspectives are addressed from feminism and cultural studies to postmodernism and critical theory. Written accessibly for students and faculty, the second…

  14. The Community College Story. Third Edition

    ERIC Educational Resources Information Center

    Vaughan, George B.

    2006-01-01

    This concise history of community colleges touches on major themes, including open access and equity, comprehensiveness, community-based philosophy, commitment to teaching, and lifelong learning. The third edition includes revised text as well as updated statistical information, time line, reading list, and Internet resources. In the more than a…

  15. Best Practices in Literacy Instruction. Second Edition.

    ERIC Educational Resources Information Center

    Morrow, Lesley Mandel, Ed.; Gambrell, Linda B., Ed.; Pressley, Michael, Ed.

    Now revised and updated, this book's second edition aims to guide teachers in providing effective, engaging literacy instruction that meets the challenges of today's legislative mandates. Identified in the book are principles of best practice that reflect cutting-edge scientific research as well as decades of hands-on classroom experience.…

  16. The staging system: Display and edit module

    NASA Technical Reports Server (NTRS)

    Edwards, E.; Bernier, L.

    1976-01-01

    The Display and Edit (D and E) Module described is one of six major modules being developed for the STAGING (STructural Analysis through Generalized INteractive Graphics) System. Several remarks are included concerning the computer environment and the architecture of the data base. The utility of this module is emphasized.

  17. Foundations of Mental Health Counseling. Second Edition.

    ERIC Educational Resources Information Center

    Weikel, William J., Ed.; Palmo, Artis J., Ed.

    The mental health counseling profession has gained increasing influence in the last 20 years. The purpose of this edited collection of articles is to chart the antecedents to, the present status of, and the future trends for this group of professionals. The book draws together historical tracings, rationales, conceptual models, and other…

  18. Business Management for Independent Schools. Fourth Edition.

    ERIC Educational Resources Information Center

    National Association of Independent Schools, Boston, MA.

    This fourth edition of a guide for independent school business managers has been produced in looseleaf format so that changes may be made promptly as decisions of regulatory bodies require modifications in current practice. Fourteen chapters are organized under three broad topic headings. Chapters in part 1, Accounting and Financial Reporting,…

  19. The High School Mathematics Library. Eighth Edition.

    ERIC Educational Resources Information Center

    Schaaf, William L.

    This eighth edition of the bibliography reflects changes in emphasis in the secondary school mathematics curriculum. The booklet is addressed primarily to high school students of all ability levels and to their mathematics teachers, and should also be of interest to students and instructors of mathematics in two-year colleges as well as librarians…

  20. Polyhedron Models for the Classroom. Second Edition.

    ERIC Educational Resources Information Center

    Wenninger, Magnus J.

    This second edition explains the historical background and techniques for constructing various types of polyhedra. Seven center-fold sheets are included, containing full-scale drawings from which nets or templates may be made to construct the models shown and described in the text. Details are provided for construction of the five Platonic solids,…