Science.gov

Sample records for 11th floor windows

  1. 14. CLOSEUP VIEW OF THE 10TH AND 11TH FLOOR WINDOWS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. CLOSE-UP VIEW OF THE 10TH AND 11TH FLOOR WINDOWS. WINDOWS HAVE WHITE TERRA COTTA SILLS, HEADS AND MULLIONS. ARCHES ARE OF TERRA COTTA INCLUDING ORNAMENTATION ABOVE THE 11TH FLOOR WINDOWS. CIRCULAR ORNAMENTATIONS BETWEEN ARCHES ARE TERRA COTTA PAINTED IN BRONZE COLOR. LOUVERS ON THE WINDOWS ARE NOT PART OF THE ORIGINAL DESIGN. THIS IS THE FRONT ELEVATION. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  2. 16. NORTHEAST CORNER VIEW OF 10TH AND 11TH FLOOR WINDOWS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. NORTHEAST CORNER VIEW OF 10TH AND 11TH FLOOR WINDOWS. CORNER SHOWS THE DIAGONALLY FLUTED SPIRAL DESIGN OF THE RELIEF COLUMN. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  3. 12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all triple windows on first and second floors. Note single swing jib door - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  4. WINDOW WITH ORIGINAL PANELED FOLDING SHUTTERS, SECOND FLOOR FRONT ROOM, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WINDOW WITH ORIGINAL PANELED FOLDING SHUTTERS, SECOND FLOOR FRONT ROOM, LOOKING OUT WALNUT STREET (SOUTH). NOTE ALTERED LOWER SECTION MADE CA. 1840. Compare window in PA-1436 A-37 - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA

  5. 22. DETAIL OF TRIPLE WINDOW, SOUTHEAST ROOM, FIRST FLOOR. Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. DETAIL OF TRIPLE WINDOW, SOUTHEAST ROOM, FIRST FLOOR. Typical for all triple windows on first and second floors. Single swing jib door under center sash opening out. Door thickness measures from flush with exterior siding to 3/4' inside bottom sash. See also Photo 12. SC-291-12. - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  6. 14. INTERIOR VIEW, FIRST FLOOR, EAST PARLOR, NORTHEAST (WINDOW) AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR VIEW, FIRST FLOOR, EAST PARLOR, NORTHEAST (WINDOW) AND SOUTHEAST (FIREPLACE) WALLS, LOOKING EAST (NOTE THE STENCILING ALONG THE CORNICE AND ON THE CEILING) - Clifton Farm, Off Baker Road, Frederick, Frederick County, MD

  7. SECOND FLOOR FRONT ROOM, WINDOWS FACING ON WALNUT STREET (SOUTH), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SECOND FLOOR FRONT ROOM, WINDOWS FACING ON WALNUT STREET (SOUTH), ORIGINAL PANELED FOLDING SHUTTERS AND HARDWARE. For a view of closed shutters see PA-1436 A-16 - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA

  8. Building 736, second floor, view to southwest showing original window ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 736, second floor, view to southwest showing original window on the left, and electrical controls and entry ladder on the right - Mare Island Naval Shipyard, Electrical Distribution Centers, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  9. 7. LIGHT WELLPhotograph taken from a fourth floor window. The ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. LIGHT WELL--Photograph taken from a fourth floor window. The skylight, now covered, can be seen at the bottom. Northwest - Empire Building, 430 Sixteenth Street, South Corner of Sixteenth Street & Glenarm Place, Denver, Denver County, CO

  10. Detail of windows on first floor east elevation of north ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of windows on first floor east elevation of north wing; camera facing west. - Mare Island Naval Shipyard, Marine Prison, Suisun Avenue, west side between Mesa Road & San Pablo, Vallejo, Solano County, CA

  11. Detail of second floor window, south wall of north wing; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of second floor window, south wall of north wing; camera facing south. - Mare Island Naval Shipyard, Marine Prison, Suisun Avenue, west side between Mesa Road & San Pablo, Vallejo, Solano County, CA

  12. Original blackandwhite print, VIEW OF FIRST FLOOR STAIRWAY WINDOW AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Original black-and-white print, VIEW OF FIRST FLOOR STAIRWAY WINDOW AT NORTHWEST CORNER OF EXTENSION - Internal Revenue Service Headquarters Building, 1111 Constitution Avenue Northwest, Washington, District of Columbia, DC

  13. Ground floor window detail (on west wall of the east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Ground floor window detail (on west wall of the east projecting wing) - Fitzsimons General Hospital, Main Hospital Building, Charlie Kelly Boulevard, North side, at intersection of Sharon A. Lane Drive, Aurora, Adams County, CO

  14. Detail of window on second floor of south elevation; camera ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of window on second floor of south elevation; camera facing north. - Mare Island Naval Shipyard, Supply Building, Walnut Avenue, southeast corner of Walnut Avenue & Fifth Street, Vallejo, Solano County, CA

  15. Detail of windows on first floor, east elevation; camera facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of windows on first floor, east elevation; camera facing west. - Mare Island Naval Shipyard, Supply Building, Walnut Avenue, southeast corner of Walnut Avenue & Fifth Street, Vallejo, Solano County, CA

  16. 5. DETAIL OF WINDOWS AND CORBELING ON SIXTH FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. DETAIL OF WINDOWS AND CORBELING ON SIXTH FLOOR AND CUPOLA OF SOUTH FRONT ELEVATION, LOOKING NORTH - Lembeck & Betz Eagle Brewery, Lager Brew House, 164-170 Ninth Street, Jersey City, Hudson County, NJ

  17. 9. SECOND FLOOR, STAIRHALL, LOOKING NORTHWEST. Venetian window in background ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. SECOND FLOOR, STAIRHALL, LOOKING NORTHWEST. Venetian window in background (see also SC-542-8). Stair railing is post-1865. - Elizabeth Barnwell Gough House, 705 Washington Street, Beaufort, Beaufort County, SC

  18. Detail of second floor window with splayed brick header, east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of second floor window with splayed brick header, east elevation; camera facing west. - Mare Island Naval Shipyard, Rubber Shop, California Avenue, west side across from Dry Dock 1 near Ninth Street, Vallejo, Solano County, CA

  19. DETAIL OF ORIGINAL WINDOWS ON SECOND FLOOR AT THE EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF ORIGINAL WINDOWS ON SECOND FLOOR AT THE EAST END, SHOWING CLEARANCE BETWEEN WINDOW SASH AND PILASTER. VIEW FACING NORTH-NORTHWEST. - U.S. Naval Base, Pearl Harbor, Aviation Storehouse, Vincennes Avenue at Simms Street, Pearl City, Honolulu County, HI

  20. 21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH HOLLOW STEEL SASH AND POLISHED PLATE WIRE GLASS. THIS WINDOW IS AT THE FRONT OF THE BUILDING. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  1. 12. Bldg #13, 2nd floor, interior stone walls w/windows and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Bldg #13, 2nd floor, interior stone walls w/windows and bent pipe thru wall L and light bulbs in ceiling, to NE - Lawrence Machine Shop, Building No. 13, Union & Canal Streets, Lawrence, Essex County, MA

  2. 92. ROSE WINDOW IN ROOM T472, NORTH TOWER, FOURTH FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    92. ROSE WINDOW IN ROOM T472, NORTH TOWER, FOURTH FLOOR, LOOKING NORTH - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  3. 11th Annual Legislative Summit, 2008

    ERIC Educational Resources Information Center

    National Indian Education Association, 2008

    2008-01-01

    Several papers were presented during the 11th Annual National Indian Education Association (NIEA) Legislative Summit. This volume contains the following briefing papers presented during the summit: (1) Reauthorization of No Child Left Behind Strengthen Native American Education; (2) The Johnson O'Malley Program; (3) Legislation to Address…

  4. How Did September 11th Affect Students?

    ERIC Educational Resources Information Center

    Lange, Nancy

    2002-01-01

    There has been much speculation about how terrorist attacks on September 11th affected everyone, including students on college campuses. At Michigan State University, the assistant director of residence life assessment, research and technology decided to investigate. This article presents results of her department's survey. (Author)

  5. 11th International Conference on Atmospheric Electricity

    NASA Technical Reports Server (NTRS)

    Christian, H. J. (Compiler)

    1999-01-01

    This document contains the proceedings from the 11th International Conference on Atmospheric Electricity (ICAE 99), held June 7-11, 1999. This conference was attended by scientists and researchers from around the world. The subjects covered included natural and artificially initiated lightning, lightning in the middle and upper atmosphere (sprites and jets), lightning protection and safety, lightning detection techniques (ground, airborne, and space-based), storm physics, electric fields near and within thunderstorms, storm electrification, atmospheric ions and chemistry, shumann resonances, satellite observations of lightning, global electrical processes, fair weather electricity, and instrumentation.

  6. 11th International Congress of Endocrinology.

    PubMed

    Fuller, P J

    2001-03-01

    The Olympics of endocrinology, the 11th International Congress of Endocrinolgy was held rather appropriately in Sydney, four weeks after the summer games of the XXWIIth Modern Olympiad. Both occasions were a great success and whilst it may be tempting to extend the analogy to the pool or the track or heaven forbid, digress into 'drugs in sport', this review will focus on endocrinology. There were over 3000 participants with ten plenary lectures, 20 meet-the-expert sessions, 41 symposia, 128 oral free communications and 1500 posters. Sydney post-Olympics provided a vibrant, exciting and picturesque setting with outstanding convention facilities. The Congress Party was held at Campbells Cove in the lee of the Harbour Bridge looking toward the Opera House which provided an opportunity for delegates to view the two architectural icons that had become so familiar in the preceding months. Credit must be given both to the Local Organising Committee of Sydney endocrinologists who made it all happen and to the International Program Organising Committee who crafted a pageant of first rate endocrinology. It is self-evident that this report can only hope to give the reader a flavour of a Congress such as this with the choice of topics being largely idiosyncratic. With five concurrent symposia and two concurrent orals each morning and afternoon of the four days, any omissions reflect not on the topic or its importance but on this reviewer's inability to be in more than one place at once! PMID:11424899

  7. FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS (THE LATTER FLOOR WAS REMOVED MANY YEARS AGO), See also PA-1436 B-12 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  8. NORTH GATE AT 11TH AVENUE (490 NORTH & 900 EAST), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTH GATE AT 11TH AVENUE (490 NORTH & 900 EAST), SALT LAKE CITY, UT. VIEW LOOKING SOUTH AT CEMETERY'S NORTH GATE (WPA PROJECT, 1938-1941). - Salt Lake City Cemetery, 200 N Street, Salt Lake City, Salt Lake County, UT

  9. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-6 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  10. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-13 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  11. Islamophobia Pre- and Post-September 11th, 2001

    ERIC Educational Resources Information Center

    Sheridan, Lorraine P.

    2006-01-01

    Although much academic research has addressed racism, religious discrimination has been largely ignored. The current study investigates levels of self reported racial and religious discrimination in a sample of 222 British Muslims. Respondents indicate that following September 11th, 2001, levels of implicit or indirect discrimination rose by 82.6%…

  12. Islamophobia pre- and post-September 11th, 2001.

    PubMed

    Sheridan, Lorraine P

    2006-03-01

    Although much academic research has addressed racism, religious discrimination has been largely ignored. The current study investigates levels of self-reported racial and religious discrimination in a sample of 222 British Muslims. Respondents indicate that following September 11th, 2001, levels of implicit or indirect discrimination rose by 82.6% and experiences of overt discrimination by 76.3%. Thus, the current work demonstrates that major world events may affect not only stereotypes of minority groups but also prejudice toward minorities. Results suggest that religious affiliation may be a more meaningful predictor of prejudice than race or ethnicity. General Health Questionnaire scores indicate that 35.6% of participants likely suffered mental health problems, with significant associations between problem-indicative scores and reports of experiencing a specific abusive incident of September 11th-related abuse by respondents. The dearth of empirical work pertaining to religious discrimination and its effects is a cause for concern. PMID:16443594

  13. Boston Society's 11th Annual Applied Pharmaceutical Analysis conference.

    PubMed

    Lee, Violet; Liu, Ang; Groeber, Elizabeth; Moghaddam, Mehran; Schiller, James; Tweed, Joseph A; Walker, Gregory S

    2016-02-01

    Boston Society's 11th Annual Applied Pharmaceutical Analysis conference, Hyatt Regency Hotel, Cambridge, MA, USA, 14-16 September 2015 The Boston Society's 11th Annual Applied Pharmaceutical Analysis (APA) conference took place at the Hyatt Regency hotel in Cambridge, MA, on 14-16 September 2015. The 3-day conference affords pharmaceutical professionals, academic researchers and industry regulators the opportunity to collectively participate in meaningful and relevant discussions impacting the areas of pharmaceutical drug development. The APA conference was organized in three workshops encompassing the disciplines of regulated bioanalysis, discovery bioanalysis (encompassing new and emerging technologies) and biotransformation. The conference included a short course titled 'Bioanalytical considerations for the clinical development of antibody-drug conjugates (ADCs)', an engaging poster session, several panel and round table discussions and over 50 diverse talks from leading industry and academic scientists. PMID:26853375

  14. Roots of terrorism: a reassessment after September 11th

    SciTech Connect

    Pilat, Joseph F.

    2002-01-01

    The brutal terrorist attacks of September 11th, the anthrax attacks that followed and growing knowledge of al Qaeda's pursuit of nuclear, biological and chemical weapons have not only intensified concerns about terrorism but also created doubts about our understanding of terrorism. These attacks were in many ways unprecedented, and ultimately raise the question of the roots or causes of terrorism. Historically and today, there have been divergent views on this question, which reflect philosophical, religious, political, sociological and other differences. These differences are not merely academic, as they can affect our understanding of both the threat and of responses to terrorism in the aftermath of September 11th, Terrorism is too complex and diverse a phenomenon to speak easily of causes. But we may be able to discern the causes of specific acts. Our response to 9/11 and other acts of terrorism will be affected by our understanding of their causes. If 9/11 was caused by US Middle East policies, the response must involve a review of these policies. If it is a backlash against globalization, the response must address the realities underlying anti-globalization sentiments. Addressing causes will not in any case end terrorism, and addressing the wrong causes will be counterproductive. Actions to reduce those conditions that create support for terrorism and aid its recruitment, which need to be clearly identified, are critical in any counterterrorism strategy. So we must understand the reasons for terrorism and, in particular, for the attacks of September 11th.T his paper will look at the question of the roots of terrorism and then look to the specific case of 911 and its aftermath, with a special view to the impact of globalization.

  15. 11th Annual LVMH Recherche Symposium: skin rejuvenation.

    PubMed

    Bonté, Frédéric

    2012-01-01

    The 11(th) Annual LVMH Recherche Scientific Symposium was held in London on October 27(th), into the warmth of the distinguished British Library, with nearly 150 industry and research attendees. The meeting organized by LVMH Recherche was centered on the theme of skin rejuvenation. The current state of play for rejuvenation research was summarized, and then advances in the science of skin aging and rejuvenation therapies were discussed in detail. Personalized genomics and current and prospective translational therapies were presented, followed by a clever linking of multiple global theories towards a cohesive plan for future goals in rejuvenation research. PMID:22615002

  16. 77 FR 21107 - Agency Information Collection Activities: Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... Information Collection Activities: Proposed Collection; Comments Requested: September 11th Victim Compensation... Review. The Department of Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be... required to respond, as well as a brief abstract: Primary: The September 11th Victim Compensation Fund...

  17. 77 FR 5056 - Agency Information Collection Activities: Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-01

    ... Information Collection Activities: Proposed Collection; Comments Requested: September 11th Victim Compensation... review. The Department of Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be... required to respond, as well as a brief abstract: Primary: The September 11th Victim Compensation Fund...

  18. PREFACE: 11th European Conference on Applied Superconductivity (EUCAS2013)

    NASA Astrophysics Data System (ADS)

    Farinon, Stefania; Pallecchi, Ilaria; Malagoli, Andrea; Lamura, Gianrico

    2014-05-01

    During the 11th edition of the European Conference on Applied Superconductivity, successfully held in Genoa from 15-19 September 2013, more than one thousand participants from over 40 countries were registered and contributions of 7 plenary lectures, 23 invited talks, 203 oral talks and 550 posters were presented. The present issue of Journal of Physics: Conference Series (JPCS) collects the 218 submitted papers that were peer reviewed and accepted in the Conference Proceedings. Similarly to the Superconductor Science and Technology Special issue: ''EUCAS 11th European Conference on Applied Superconductivity'' which contains some plenary and invited contributions, as well as some selected contributions, in this issue the papers are sorted according to the four traditional topics of interest of EUCAS, namely Materials (56 papers), Wires and Tapes (47 papers), Large Scale Applications (64 papers) and Electronics (51 papers). While the it Superconductors Science and Technology special issue focuses on the scientific and technological highlights of the conference, this collection provides an overall view of the worldwide research activity on applied superconductivity, mirroring the main guidelines and the hottest issues, which range from basic studies on newly discovered superconducting compounds to the state-of-the-art advances in large scale applications, wires and tapes fabrication and electronics. We would like to point out that, among the JPCS contributions, six papers present works financed by ongoing EU-Japan projects, three papers belong to the session on junctions and SQUIDs dedicated to the memory of Antonio Barone and one paper belongs to the session on pinning and flux dynamics dedicated to the memory of John Clem. Finally, we would like to thank all the people whose careful work contributed to the preparation of this JPCS issue, in particular the session chairs as well as the peer reviewers. The Editors Stefania Farinon (Editor in Chief, Large Scale

  19. 11th European VLBI Network Symposium & Users Meeting

    NASA Astrophysics Data System (ADS)

    The Laboratoire d'Astrophysique de Bordeaux (LAB) at the University of Bordeaux (France), on behalf of the European VLBI Consortium, hosted the 11th European VLBI Network (EVN) Symposium and EVN Users Meeting on October 9-12, 2012. The Symposium was held at the "Chambre de Commerce et d'Industrie de Bordeaux", located in the "Palais de la Bourse", in the center of Bordeaux. The conference highlighted the latest scientific results and technical developments from VLBI, space VLBI and e-VLBI. All fields of astrophysics were concerned - stellar, galactic and extragalactic - as well as astrometry and planetary science. Presentations addressing synergy between (e-)VLBI and other new or planned radio facilities (ALMA, LOFAR, e-MERLIN,...) or instruments at other wavelengths (Fermi, CTA, Gaia,...) were also an integral part of the program. The scientific program was organized in 11 sessions including 71 oral presentations, with an additional 43 posters available for viewing during the entire length of the conference. An EVN Users Meeting was also held during one of the evening to foster interaction between the EVN users and the EVN organization. The symposium was attended by a total of 122 delegates originating from 47 institutes world-wide, sharing new VLBI science and innovations while also building links with other communities. The research leading to these results has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no 283393 (RadioNet3).

  20. The roots of terrorism: A reassessment after September 11th

    SciTech Connect

    Pilat, Joseph F.

    2002-01-01

    The brutal terrorist attacks of September 11th, the anthrax attacks that followed and growing knowledge of al Qaeda's pursuit of nuclear, biological and chemical weapons have not only intensified concerns about terrorism but also created doubts about our understanding of terrorism. These attacks were in many ways unprecedented, and ultimately raise the question of the roots or causes of terrorism. Historically and today, there have been divergent views on this question, which reflect philosophical, religious, political and other differences. These differences are not merely academic, as they can affect our understanding of both the threat and of responses to terrorism in the aftermath of September 1 1 th. Terrorism is too complex and diverse a phenomenon to speak easily of causes. But we may be able to discern the causes of specific acts. Our response to 9/11 and other acts of terrorism will be affected by our understanding of their causes, as well as by possible political requirements to address widespread perceptions of causes. If 9/11 was caused by Islamic radicalism, the near-term response must be to ensure the terrorists are defeated and pose no fiuther danger. In the longer term, education is critical. If the attacks were caused by US Middle East policies, the response should involve a review of those policies. This may or may not result in changes to policy, public diplomacy, etc. If the attacks were a backlash against globalization, the response must address the realities underlying anti-globalization sentiments. Addressing causes (real and perceived) will not in any case end terrorism, and addressing the wrong causes can be counterproductive. Actions to reduce those conditions that create support for terrorism and aid its recruitment effort are critical to any counterterrorism strategy. For this reason alone, we must do everything possible to understand the reasons terrorism may be undertaken, including the attacks of September 1 1 th. This paper will look

  1. PREFACE: The 11th International Superconductive Electronics Conference (ISEC 07)

    NASA Astrophysics Data System (ADS)

    Miller, Donald L.; Wellstood, Fred; Donaldson, Gordon

    2007-11-01

    The 11th International Superconductive Electronics Conference (ISEC 07) was held in June 2007 in Washington, DC, USA. This special issue is a compendium of selected papers based on the technology presented at that meeting. ISEC, held on a biennial basis, traditionally rotates from Japan to Europe to the United States. The single exception to this rotation has been the 2003 conference which was held in Australia. This conference brings together the world's experts in superconductive electronics in a forum which is conducive to interaction among the participants with maximal interchange between the various topics. The conference this year was truly an international event with participation from 13 countries over six continents. The quality of presentations was also high. The conference witnessed the continued maturation of both digital/mixed signal electronics and SQUID-based instrumentation along with a number of novel devices. Of particular note was the transition of superconducting quantum computing research from a novel abstract concept to a broad-based research activity. The organizing committee was able to gather an exemplary group of invited speakers to share their results and visions for future progress. These presentations spanned both the subtopics of superconductor electronics and the history of the field. As I reflect on the efforts which went into making this conference a success, I must express my appreciation to many individuals and organizations, in no particular order. I would like to thank Northrop Grumman for their support for my activities as chair of the conference, both in terms of making my time available and for direct financial considerations. Centennial Conferences, as the conference organizer, provided invaluable guidance and administrative support. I would also like to acknowledge the support of the IEEE Council on Superconductivity, in particular in the persons of Moises Levy and John Spargo. I would be remiss if I did not thank John

  2. 77 FR 4827 - Agency Information Collection Activities; Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-31

    ... Information Collection Activities; Proposed Collection; Comments Requested: September 11th Victim Compensation... Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be submitting the following... the Form/Collection: Victim Compensation Objection Form. (3) Agency form number, if any, and...

  3. 77 FR 21107 - Agency Information Collection Activities: Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... Information Collection Activities: Proposed Collection; Comments Requested: September 11th Victim Compensation... Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be submitting the following.../Collection: Victim Compensation Objection Form. (3) Agency form number, if any, and the applicable...

  4. 77 FR 26043 - Agency Information Collection Activities; Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-02

    ... Information Collection Activities; Proposed Collection; Comments Requested: September 11th Victim Compensation... Department of Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be submitting the...) Type of Information Collection: New collection. (2) Title of the Form/Collection: Victim...

  5. 77 FR 21997 - Agency Information Collection Activities: Proposed Collection; Comments Requested: September 11th...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-12

    ... Information Collection Activities: Proposed Collection; Comments Requested: September 11th Victim Compensation... Justice (DOJ), Civil Division, September 11th Victim Compensation Fund, will be submitting the following.../Collection: Victim Compensation Objection Form. (3) Agency form number, if any, and the applicable...

  6. E SERIES MAGAZINES, OVERVIEW OF REAR OF MAGAZINES FROM 11TH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    E SERIES MAGAZINES, OVERVIEW OF REAR OF MAGAZINES FROM 11TH ST. E 106 IN THE FOREGROUND. - Naval Magazine Lualualei, Headquarters Branch, Magazine Type, Eleventh, Thirteenth, Fifteenth, Sixteenth, & Seventeenth Streets, Pearl City, Honolulu County, HI

  7. Work Values of 5th, 8th, and 11th Grade Students

    ERIC Educational Resources Information Center

    Hales, Loyde W.; Fenner, Bradford

    1972-01-01

    Self Realization, Job Security, Money, and Altruism were found to be the most important work values, with 5th and 8th grade students differing from 11th grade students on Altruism and Self Realization. (Author)

  8. The Effects of 11th Graders' Opinions on Their Interpretation of Conflicting Arguments.

    ERIC Educational Resources Information Center

    Slater, Wayne H.

    1998-01-01

    Examines how individual differences in epistemological beliefs, strength of beliefs, and need for cognition affected the written conclusions that 11th graders constructed after reading a passage presenting arguments opposing and supporting gun control. (SR)

  9. VIEW OF COMPANY HOUSES ON 11TH STREET AT THE RAILROAD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF COMPANY HOUSES ON 11TH STREET AT THE RAILROAD TRACKS. No. 401 to right (asbestos siding). House on left has retained the original clapboard siding. - Town of Windber, Windber, Somerset County, PA

  10. 11th Annual NIH Pain Consortium Symposium on Advances in Pain Research | Division of Cancer Prevention

    Cancer.gov

    The NIH Pain Consortium will convene the 11th Annual NIH Pain Consortium Symposium on Advances in Pain Research, featuring keynote speakers and expert panel sessions on Innovative Models and Methods. The first keynote address will be delivered by David J. Clark, MD, PhD, Stanford University entitled “Challenges of Translational Pain Research: What Makes a Good Model?” |

  11. 11th International congress on catalysis - 40th anniversary. Part A and B

    SciTech Connect

    Hightower, J.W.; Delgass, W.N.; Iglesia, E.; Bell, A.T.

    1996-12-31

    Reports are presented from the 11th International Congress On Catalysis. Topics are concerned with surface properties, processing and conversion of hydrocarbons, photocatalytic activity, pollution control, oxidation, environmental catalysis, characterization methods, and deactivation. Individual papers have processed separately for the United states Department of Energy databases.

  12. The Federal Forecasters Conference--2000. Papers and Proceedings (11th, Washington, DC, September 14, 2000).

    ERIC Educational Resources Information Center

    Gerald, Debra, E., Ed.

    The 11th Federal Forecasters Conference provided a forum where 180 forecasters from different federal agencies and other organizations could meet and discuss forecasting in the United States. The theme for this conference was "Forecasting, Policy, and the Internet." In the morning session, a panel presentation featured three speakers. Neilson C.…

  13. Improving Instruction, Motivation, and Writing Skills To Foster Content Mastery among 11th Grade Chemistry Students.

    ERIC Educational Resources Information Center

    Litteral, Diana B.

    This practicum was designed to increase concept mastery of 11th grade chemistry students by improving instruction, motivation, and writing skills. The problem addressed was that many chemistry students, perform well in group learning situations, such as labs, but perform poorly on content-mastery tests. As a result of reviewing the literature, the…

  14. Expertise, Argumentation and Scientific Practice: A Case Study about Environmental Education in the 11th Grade.

    ERIC Educational Resources Information Center

    Jimenez Alexandre, Maria Pilar; Pereiro Munoz, Cristina; Aznar Cuadrado, Virginia

    This paper reports a case study about argumentation and scientific practice in the 11th grade. The objectives of the study are to identify argument patterns and dimensions of the scientific practice in students' conversations and actions while engaged in an environmental management project in a wetland. The focus are the warrants that students…

  15. 77 FR 43823 - Filing Dates for the Michigan Special Election in the 11th Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-26

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Michigan Special Election in the 11th Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Michigan has...

  16. Education Scholars' Reflections on the Implications of September 11th for Curriculum.

    ERIC Educational Resources Information Center

    Pace, Judith L.

    2002-01-01

    Presents the reflections of five educational scholars on the potential impact of the events of September 11th on curriculum and how to address it. Edited excerpts are featured from Maxine Greene, Nel Noddings, Jesse Goodman, Michael Apple, and Gloria Ladson-Billings. Respondents address such issues as cultural awareness, moral education, and…

  17. Coping with Terrorism: Age and Gender Differences in Effortful and Involuntary Responses to September 11th

    ERIC Educational Resources Information Center

    Wadsworth, Martha E.; Gudmundsen, Gretchen R.; Raviv, Tali; Ahlkvist, Jarl A.; McIntosh, Daniel N.; Kline, Galena H.; Rea, Jacqueline; Burwell, Rebecca A.

    2004-01-01

    This study examined age and gender differences and similarities in stress responses to September 11th. Adolescents, young adults, and adults reported using a variety of strategies to cope with the terrorist attacks including acceptance, positive thinking, and emotional expression. In addition, involuntary stress responses such as physiological…

  18. Review of "The September 11th Education Program: A National Interdisciplinary Curriculum"

    ERIC Educational Resources Information Center

    Waterson, Robert A.; Jenne, Katherine

    2011-01-01

    A review of "The September 11th Education Program: A National Interdisciplinary Curriculum" reveals a sensitive and well-created program for the 5-12 social studies teacher to use in teaching about the challenging subject of 9/11. This program provides an opportunity for teachers to find a balance among understanding, critical analysis,…

  19. September 11th, the Internet, and the Affects on Information Provision in Libraries.

    ERIC Educational Resources Information Center

    Hamilton, Stuart

    The September 11th terrorist attacks on the United States have contributed greatly to a change in the information environment around the world. The weeks following the attacks saw governments around the world rush to pass legislation designed to prevent future acts of terrorism. Much of this legislation targeted information flow, especially on the…

  20. Labor Market Effects of September 11th on Arab and Muslim Residents of the United States

    ERIC Educational Resources Information Center

    Kaushal, Neeraj; Kaestner, Robert; Reimers, Cordelia

    2007-01-01

    We investigated whether the September 11, 2001 terrorists' attacks had any effect on employment, earnings, and residential mobility of first- and second-generation Arab and Muslim men in the United States. We find that September 11th did not significantly affect employment and hours of work of Arab and Muslim men, but was associated with a 9-11…

  1. Asian Studies: Experimental Course of Study, 11th or 12th Year Elective.

    ERIC Educational Resources Information Center

    Fryberg, Carl

    This experimental course of study has a twofold purpose. Primarily, it is intended to serve as basis for an elective for the 11th or 12th year student. Openended in organization, it encourages teachers and students to add new dimensions. It provides a comprehensive bibliography and detailed information with which to develop an elective in the area…

  2. Evaluation of 11th Grade Students' Cognitive Behaviour on Some Subjects of Analysis According to Gender

    ERIC Educational Resources Information Center

    Nevin, Orhun

    2005-01-01

    The purpose of this research is to investigate students' cognitive behaviour in the subjects of function, limit, and derivative according to gender. The research was conducted with the participation of 67 female and 58 male 11th grade students of Gazi High School in Eskisehir in the academic year 2000/2001. The data were obtained through a test…

  3. Emotional Intelligence as a Predictor of Leadership of Kuwaiti High and Low Achieving 11th Graders

    ERIC Educational Resources Information Center

    Alnabhan, Mousa

    2010-01-01

    The current study examined the association between emotional intelligence (EI) and the Leadership components (L) of high school students in the state of Kuwait. The possibility of predicting each leadership component via emotional intelligence components was investigated for high and low achievers. A sample of 11th grade students from Kuwaiti…

  4. Impact of the September 11th Terrorist Attacks on Teenagers' Mental Health

    ERIC Educational Resources Information Center

    Gould, Madelyn S.; Munfakh, Jimmie Lou Harris; Kleinman, Marjorie; Lubell, Keri; Provenzano, Danielle

    2004-01-01

    The impact of the September 11th terrorist attacks on adolescents' mental health is reported. Two successive cohorts of students in 6 New York state high schools, identified from health courses, completed an in-school self-report baseline assessment of hopelessness, impairment, and help-seeking behavior. One year later, these students completed a…

  5. INTERIOR VIEW OF THE SECOND FLOOR STAIR HALL. NOTE THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE SECOND FLOOR STAIR HALL. NOTE THE TONGUE-AND-GROOVE WOOD FLOORING AND THE WINDOW ABOVE THE STAIR LANDING. VIEW FACING SOUTH. - Hickam Field, Officers' Housing Type D, 111 Beard Avenue, Honolulu, Honolulu County, HI

  6. 8. DETAIL OF EAST FRONT, SHOWING FIRST FLOOR STOREFRONT AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL OF EAST FRONT, SHOWING FIRST FLOOR STOREFRONT AND SECOND FLOOR WINDOWS. VIEW TO WEST. - Commercial & Industrial Buildings, Dubuque Seed Company Warehouse, 169-171 Iowa Street, Dubuque, Dubuque County, IA

  7. Third Floor Plan, Second Floor Plan, First Floor Plan, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Third Floor Plan, Second Floor Plan, First Floor Plan, Ground Floor Plan, West Bunkhouse - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  8. The Reporting of the September 11th Terrorist Attacks in American Social Studies Textbooks: A Muslim Perspective

    ERIC Educational Resources Information Center

    Saleem, Mohammed M.; Thomas, Michael K.

    2011-01-01

    This study analyzes the reporting of the September 11th terrorist attacks in social studies textbooks from a Muslim perspective and reports on findings from a study of the responses of American Muslim children to the treatment of the events of September 11th in social studies textbooks. Constructivist grounded theory was used to centralize the…

  9. 11th National Conference on Science, Policy, and the Environment: Our Changing Oceans

    SciTech Connect

    Peter Saundry

    2012-04-17

    On January 19-21, 2011, The National Council for Science and the Environment (NCSE) successfully convened its 11th National Conference on Science, Policy and the Environment: Our Changing Oceans in Washington, DC at the Ronald Reagan Building and International Trade Center. Over 1,247 participants attended the conference, representing federal, state and local governments, university and colleges across the US, civil society organizations, the business community, and international entities. In addition, the conference was webcast to an audience across several states. The conference provided a forum to examine the profound changes our ocean will undergo over the next 25-50 years and share various perspectives on the new research, tools, and policy initiatives to protect and sustain our ocean. Conference highlights and recommendations are available to the public on NCSE's conference website, www.OurChangingOceans.org.

  10. Wake of September 11th attacks: implications for research, policy and practice.

    PubMed

    Darden, Madeline Lyles

    2002-02-01

    The National Consortium for African American Children (NCAAC) held a National Forum on Bioterrorism and Children on November 6, 2001 in Washington, DC. Convened in the wake of the September 11th attacks on New York City and the Pentagon, this unprecedented conference assembled a cross-section of professionals in child advocacy, health, mental health, insurance, economics, law enforcement, and media technology. The ensuing discussion focused on issues surrounding biological agents, their impact on children and youth, and the strategies needed to protect the health and mental health of children and families in the event of a large-scale bioterrorist crisis. Lessons learned as well as the implications of the terrorist acts from the tragic events of September 11th formed the backdrop for engaging dialogue among various industry executives and professionals. Accounts of personal experiences during the unprecedented tragedy of 9-11 were shared and provided a context for heightened preparedness planning for children and adults. A collaborative statement was also presented by NCAAC, the National Medical Association, the Association of Black Psychologists, and the National Black Media Coalition. This forum was hailed as a model for communities of color to join and help bolster broad-based coalition building to ensure the availability of culturally and linguistically appropriate messages, services, and support. As intended, the forum devoted significant attention to the special needs of children, their caregivers and families and provided for an invaluable interchange which is slated to evolve into a national action plan to address the imminent dangers facing our nation's children. PMID:11853055

  11. 35. DETAIL VIEW, WEST WINDOW IN WEST ELEVATION GABLE (NOTE: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. DETAIL VIEW, WEST WINDOW IN WEST ELEVATION GABLE (NOTE: THE MOLDED STRINGCOURSE THAT PROJECTS FROM THE BASE OF THE FIRST FLOOR WINDOW ARCH AND VISIBLE WATERTABLE) - Kenworthy Hall, State Highway 14 (Greensboro Road), Marion, Perry County, AL

  12. 23. CORNICES AND WINDOW ARCHITRAVES OF SOUTHEAST AND SOUTHWEST ROOMS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. CORNICES AND WINDOW ARCHITRAVES OF SOUTHEAST AND SOUTHWEST ROOMS, FIRST FLOOR. Door architraves similar to window architraves. - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  13. Floors: Selection and Maintenance.

    ERIC Educational Resources Information Center

    Berkeley, Bernard

    Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…

  14. PREFACE: 11th Anglo-French Physical Acoustics Conference (AFPAC 2012)

    NASA Astrophysics Data System (ADS)

    Saffari, Nader; Lhémery, Alain; Lowe, Mike

    2013-08-01

    The 11th Anglo-French Physical Acoustics Conference (AFPAC) was held in Brighton, UK on 18-20 January 2012. This event, which is an annual collaboration between the Physical Acoustics Group (PAG) of the Institute of Physics and the Groupe d'Acoustique Physique, Sous-marine et UltraSonore (GAPSUS) of the Société Française d'Acoustique, successfully achieved its main aim of being a small, friendly meeting of high scientific quality, welcoming younger researchers and PhD students and covering a broad range of subjects in Acoustics. The participants heard 44 excellent presentations covering an exciting and diverse range of subjects, from audio acoustics to guided waves in composites and from phononic crystals to ultrasound surgery. As is the custom at these meetings, four prominent invited speakers set the pace for the event; these were Keith Attenborough (The Open University, UK), Claire Prada (Institut Langevin, France), David Moore (University of Nottingham, UK) and Philippe Roux (IS Terre, France). The submission of manuscripts for publication in the proceedings was, as in previous years, on a voluntary basis and in these proceedings we present 11 peer reviewed papers. Due to some unforeseen problems there has been a longer than planned delay in preparing these proceedings, for which the Editors sincerely apologise to the authors and the community. Nader Saffari, Mike Lowe and Alain Lhémery

  15. Gut Microbiome of an 11th Century A.D. Pre-Columbian Andean Mummy.

    PubMed

    Santiago-Rodriguez, Tasha M; Fornaciari, Gino; Luciani, Stefania; Dowd, Scot E; Toranzos, Gary A; Marota, Isolina; Cano, Raul J

    2015-01-01

    The process of natural mummification is a rare and unique process from which little is known about the resulting microbial community structure. In the present study, we characterized the microbiome of paleofeces, and ascending, transverse and descending colon of an 11th century A.D. pre-Columbian Andean mummy by 16S rRNA gene high-throughput sequencing and metagenomics. Firmicutes were the most abundant bacterial group, with Clostridium spp. comprising up to 96.2% of the mummified gut, while Turicibacter spp. represented 89.2% of the bacteria identified in the paleofeces. Microbiome profile of the paleofeces was unique when compared to previously characterized coprolites that did not undergo natural mummification. We identified DNA sequences homologous to Clostridium botulinum, Trypanosoma cruzi and human papillomaviruses (HPVs). Unexpectedly, putative antibiotic-resistance genes including beta-lactamases, penicillin-binding proteins, resistance to fosfomycin, chloramphenicol, aminoglycosides, macrolides, sulfa, quinolones, tetracycline and vancomycin, and multi-drug transporters, were also identified. The presence of putative antibiotic-resistance genes suggests that resistance may not necessarily be associated with a selective pressure of antibiotics or contact with European cultures. Identification of pathogens and antibiotic-resistance genes in ancient human specimens will aid in the understanding of the evolution of pathogens as a way to treat and prevent diseases caused by bacteria, microbial eukaryotes and viruses. PMID:26422376

  16. Gut Microbiome of an 11th Century A.D. Pre-Columbian Andean Mummy

    PubMed Central

    Santiago-Rodriguez, Tasha M.; Fornaciari, Gino; Luciani, Stefania; Dowd, Scot E.; Toranzos, Gary A.; Marota, Isolina; Cano, Raul J.

    2015-01-01

    The process of natural mummification is a rare and unique process from which little is known about the resulting microbial community structure. In the present study, we characterized the microbiome of paleofeces, and ascending, transverse and descending colon of an 11th century A.D. pre-Columbian Andean mummy by 16S rRNA gene high-throughput sequencing and metagenomics. Firmicutes were the most abundant bacterial group, with Clostridium spp. comprising up to 96.2% of the mummified gut, while Turicibacter spp. represented 89.2% of the bacteria identified in the paleofeces. Microbiome profile of the paleofeces was unique when compared to previously characterized coprolites that did not undergo natural mummification. We identified DNA sequences homologous to Clostridium botulinum, Trypanosoma cruzi and human papillomaviruses (HPVs). Unexpectedly, putative antibiotic-resistance genes including beta-lactamases, penicillin-binding proteins, resistance to fosfomycin, chloramphenicol, aminoglycosides, macrolides, sulfa, quinolones, tetracycline and vancomycin, and multi-drug transporters, were also identified. The presence of putative antibiotic-resistance genes suggests that resistance may not necessarily be associated with a selective pressure of antibiotics or contact with European cultures. Identification of pathogens and antibiotic-resistance genes in ancient human specimens will aid in the understanding of the evolution of pathogens as a way to treat and prevent diseases caused by bacteria, microbial eukaryotes and viruses. PMID:26422376

  17. Remembering September 11th: the role of retention interval and rehearsal on flashbulb and event memory.

    PubMed

    Shapiro, Lauren R

    2006-02-01

    Retention interval and rehearsal effects on flashbulb and event memory for 11th September 2001 (9/11) were examined. In Experiment 1, college students were assessed three times (Groups 1 and 2) or once (Group 3) over 11 weeks. In Experiment 2, three new groups assessed initially at 23 weeks (Group 4), 1 year (Group 5), or 2 years (Group 6) were compared at 1 year and at 2 years with subsamples of those assessed previously. No effects of retention interval length or rehearsal were found for flashbulb memory, which contained details at each assessment. Event memory, but not consistency, was detrimentally affected by long retention intervals, but improved with rehearsal. Recall was higher for the reception event than for the main events. Also, consistency from 1 day to 11 weeks, but not 1 year to 2 years, was higher for flashbulb memory than for event memory. Event recall was enhanced when respondents conceived of their memory as vivid, frozen, and encompassing a longer period of time. Positive correlations were found for event memory with confidence in accuracy and with rehearsal through discussion at 2 years. PMID:16484105

  18. Examining Scientific and Technical Writing Strategies in the 11th Century Chinese Science Book "Brush Talks from Dream Brook"

    ERIC Educational Resources Information Center

    Zhang, Yuejiao

    2013-01-01

    This article examines the influential Chinese science book "Brush Talks from Dream Brook," written by Shen Kuo in the 11th century. I suggest that "Brush Talks" reveals a tension between institutionalized science and science in the public, and a gap between the making of scientific knowledge and the communication of such…

  19. Using ARCS Model to Promote 11th Graders' Motivation and Achievement in Learning about Acids and Bases

    ERIC Educational Resources Information Center

    Feng, Sung-Lin; Tuan, Hsiao-Lin

    2005-01-01

    The purposes of this study are: to apply the ARCS model in designing an acid and bases unit, and to assess a single class of 11th graders for motivation and achievement outcomes before and after ARCS instruction. Four essential strategies for designing motivation instruction in the ARCS model were: Attention, Relevance, Confidence, and…

  20. Your Reading: An Annotated Booklist for Middle School and Junior High. 11th Edition. NCTE Bibliography Series.

    ERIC Educational Resources Information Center

    Brown, Jean E., Ed.; Stephens, Elaine C., Ed.

    Organized around the theme of "challenges," the 11th edition of "Your Reading" offers annotations of more than 1,200 books for young adults. Intended for teachers, librarians, parents, and students, this booklist presents recently published books that can be read for many purposes--for sheer enjoyment of the story, to pique curiosity or satisfy…

  1. 11th Annual Comparative Analysis of the Racine Unified School District: Demographics, Attendance, Finances, Student Engagement, and Achievement

    ERIC Educational Resources Information Center

    Public Policy Forum, 2008

    2008-01-01

    This is the 11th annual report on conditions affecting the Racine Unified School District (RUSD). Analysis continues to focus on the long-term historical trends in RUSD, comparing RUSD to nine peer school districts and the State of Wisconsin. RUSD peer districts are Wisconsin's largest (Milwaukee Public Schools are not included) and their…

  2. The Effects of Cardio-Syntactic Analysis Instruction on Writing Scores in a 11th Grade High School Classroom

    ERIC Educational Resources Information Center

    Kariuki, Patrick N.; Blair, Paul W.

    2015-01-01

    The purpose of this research was to determine the effects of Cardio-Syntactic Analysis instruction on writing scores in an 11th grade English class. The sample consisted of 35 students enrolled in an Honor's English 11 class at Volunteer high School, in Church Hill, TN. The class was randomly assigned into an experimental group of 17 students and…

  3. Investigating Community Factors as Predictors of Rural 11th-Grade Agricultural Science Students' Choice of Careers in Agriculture

    ERIC Educational Resources Information Center

    Adedokun, Omolola A.; Balschweid, Mark A.

    2008-01-01

    This study investigates the links between community contexts/factors and rural 11th-grade agricultural science students' choice of careers in agriculture. A logistic regression model was developed and tested to examine the extent to which nine measures of community contexts (i.e., membership in FFA, membership in 4-H, community attachment,…

  4. View of corridor running north/south on the second floor showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of corridor running north/south on the second floor showing door openings to residential rooms, window opening to lightwell, and secondary stair to third floor - Hotel Adams, 391 Leavenworth Street, San Francisco, San Francisco County, CA

  5. Percutaneous coronary intervention for coronary bifurcation disease: 11th consensus document from the European Bifurcation Club.

    PubMed

    Lassen, Jens Flensted; Holm, Niels Ramsing; Banning, Adrian; Burzotta, Francesco; Lefèvre, Thierry; Chieffo, Alaide; Hildick-Smith, David; Louvard, Yves; Stankovic, Goran

    2016-05-17

    Coronary bifurcations are involved in 15-20% of all percutaneous coronary interventions (PCI) and remain one of the most challenging lesions in interventional cardiology in terms of procedural success rate as well as long-term cardiac events. The optimal management of bifurcation lesions is, despite a fast growing body of scientific literature, the subject of considerable debate. The European Bifurcation Club (EBC) was initiated in 2004 to support a continuous overview of the field, and aims to facilitate a scientific discussion and an exchange of ideas on the management of bifurcation disease. The EBC hosts an annual, compact meeting, dedicated to bifurcations, which brings together physicians, engineers, biologists, physicists, epidemiologists and statisticians for detailed discussions. Every meeting is finalised with a consensus statement which reflects the unique opportunity of combining the opinions of interventional cardiologists with the opinions of a large variety of other scientists on bifurcation management. The present 11th EBC consensus document represents the summary of the up-to-date EBC consensus and recommendations. It points to the fact that there is a multitude of strategies and approaches to bifurcation stenting within the provisional strategy and in the different two-stent strategies. The main EBC recommendation for PCI of bifurcation lesions remains to use main vessel (MV) stenting with a proximal optimisation technique (POT) and provisional side branch (SB) stenting as a preferred approach. The consensus document covers a moving target. Much more scientific work is needed in non-left main (LM) and LM bifurcation lesions for continuous improvement of the outcome of our patients. PMID:27173860

  6. Aortopulmonary window

    MedlinePlus

    Aortopulmonary window is a rare heart defect in which there is a hole connecting the major artery taking blood ... rest of the body. Babies with an aortopulmonary window have a hole in between the aorta and ...

  7. Assessment of China's Energy-Saving and Emission-Reduction Accomplishments and Opportunities During the 11th Five Year Plan

    SciTech Connect

    Levine, Mark D.; Price, Lynn; Zhou, Nan; Fridley, David; Aden, Nathaniel; Lu, Hongyou; McNeil, Michael; Zheng, Nina; Yining, Qin; Yowargana, Ping

    2010-04-28

    During the period 1980 to 2002, China experienced a 5% average annual reduction in energy consumption per unit of gross domestic product (GDP). The period 2002-2005 saw a dramatic reversal of the historic relationship between energy use and GDP growth: energy use per unit of GDP increased an average of 3.8% per year during this period (NBS, various years). China's 11th Five Year Plan (FYP), which covers the period 2006-2010, required all government divisions at different levels to reduce energy intensity by 20% in five years in order to regain the relationship between energy and GDP growth experienced during the 1980s and 1990s. This report provides an assessment of selected policies and programs that China has instituted in its quest to fulfill the national goal of a 20% reduction in energy intensity by 2010. The report finds that China has made substantial progress toward its goal of achieving 20% energy intensity reduction from 2006 to 2010 and that many of the energy-efficiency programs implemented during the 11th FYP in support of China's 20% energy/GDP reduction goal appear to be on track to meet - or in some cases even exceed - their energy-saving targets. It appears that most of the Ten Key Projects, the Top-1000 Program, and the Small Plant Closure Program are on track to meet or surpass the 11th FYP savings goals. China's appliance standards and labeling program, which was established prior to the 11th FYP, has become very robust during the 11th FYP period. China has greatly enhanced its enforcement of new building energy standards but energy-efficiency programs for buildings retrofits, as well as the goal of adjusting China's economic structure to reduce the share of energy consumed by industry, do not appear to be on track to meet the stated goals. With the implementation of the 11th FYP now bearing fruit, it is important to maintain and strengthen the existing energy-saving policies and programs that are successful while revising programs or adding new

  8. PREFACE: 11th International Workshop on Positron and Positronium Chemistry (PPC-11)

    NASA Astrophysics Data System (ADS)

    Pujari, P. K.; Sudarshan, K.; Dutta, D.

    2015-06-01

    The International Workshop on Positron and Positronium Chemistry (PPC) is a prestigious triennial conference series with a rich history. The 11th meeting in the series (PPC-11) was held at Cidade de Goa, Goa, India during 9-14, November, 2014. It was organized by Bhabha Atomic Research Centre (BARC), Mumbai. The co-organizers were Saha Institute of Nuclear Physics (SINP), Kolkata, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam and Indian Association of Nuclear Chemists and Allied Scientists (IANCAS), Mumbai. PPC-11 attracted participants both from academic institutions and industries. About 120 participants from 20 countries representing all continents participated in the conference. The conference continued the tradition of excellence in terms of quality of presentations and discussions. There were 33 plenary and invited talks, 39 oral presentations and 40 posters. The conference stood true to its multidisciplinary tag with papers presented in the fields of fundamentals of positron and positronium chemistry, applications in polymers, porous materials, metals/alloys, studies in liquids, biological applications as well as developments in theory and experimental techniques. The enthusiastic participation of senior researchers and young students made the scientific program a grand success. In order to encourage the student participants (twenty) and promote excellence, a committee of senior members evaluated their presentations and the top three contributions were awarded. The positron and positronium community paid homage to the memory of late Profs. J. Kristiak and A.T. Stewart. A brief sketch of their life and work was presented by Profs. Jan Kuriplach and Toshio Hyodo, respectively. All the papers published in these proceedings have been peer reviewed by the participants of PPC-11. Editors thank all the reviewers for sparing their valuable time and helping us in bringing out the proceedings with 43 contributed articles in the scheduled time. We are

  9. Geodetically derived fault slip distribution model for the May, 11th 2011 Lorca earthquake (SE, Spain)

    NASA Astrophysics Data System (ADS)

    Gonzalez, P. J.; Tiampo, K. F.; Palano, M.; Cannavò, F.; Fernandez, J.

    2011-12-01

    The Alhama de Murcia Fault (AMF) is a compound multisegmented right-lateral to reverse fault system. The AMF is one the longest faults in the Eastern Betics Shear zone (Southeastern Spain). In the last decades its seismogenic potential has been evaluated and earthquake maximum magnitudes were forecast based on paleoseismic and dating data. On May 11th, 2011 a moderate (Mw 5.1) earthquake shook the region, causing 9 casualties and severe damages in Lorca city (Murcia region). The reported location of the aftershocks sequence did not follow any particular trend; furthermore in-situ geology surveys did not identify any fault slip related ground deformation. To contribute to a better seismic hazard assessment, we need to locate and, if possible, characterize the fault-slip distribution that generated the earthquake. In this work, we detected small but significant ground deformation in the epicentral area by using geodetic (GPS and satellite radar interferometry) data. Geodetic data was processed by using a stack of differential radar interferometry (corrected for a known subsidence contribution and estimating their error budget), daily GPS estimated coordinates and high-rate 1-Hz GPS data. We jointly inverted the detected static coseismic displacements (a GPS station and two ENVISAT interferograms from different tracks) for the fault plane geometry parameters by using a rectangular dislocation model embedded in a homogeneous elastic half-space. The best-fitting fault plane follows closely the geologically derived AMF geometry (NE-SW strike trend and dipping ~60-70o to NW). Later, the obtained model geometry was extended and divided into patches to allow for a detailed analysis of the fault slip distribution pattern. Slip distribution indicates that slip occurred in a single patch with reverse and right-lateral motion (with peak fault slip magnitude of ~9 cm). However, the modelling results also indicate that the fault slip was shallower along the centre and southwest

  10. Selected papers from the 11th European Conference on Applied Superconductivity (EUCAS 2013)

    NASA Astrophysics Data System (ADS)

    Ferdeghini, Carlo; Putti, Marina

    2014-04-01

    The 11th edition of the European Conference on Applied Superconductivity (EUCAS) was held in Genoa (15-19 September 2013) and registered the participation of more than one thousand attendants from over 40 countries. During the conference seven plenary lectures, 23 invited, and 203 oral contributions and 550 posters have been presented, all focused on recent developments in the field of superconductivity applications. This issue of Superconductor Science Technology is a collection of some of the plenary and invited contributions. Moreover, the winners of the EUCAS prizes (the electronics prize dedicated to the memory of Antonio Barone), and the most significant oral contributions selected by the 125 chairs involved in the organization, have been invited to submit their papers. The remaining papers presented at the conference will be published in the Journal Physics Conference Series, edited by S Farinon, G Lamura, A Malagoli and I Pallecchi. The papers have been organized into the four traditional topics of interest of EUCAS, namely materials, wires and tapes, large scale applications, and electronics. The plenary lectures on these four topics have been collected: Potential of iron-based superconductors for practical materials in the future (J Shimoyama), Coated conductors for power applications: materials challenges (J Obradors), Challenges and status of ITER conductor production (A Devred), and the Impact of superconducting devices in imaging in neuroscience (G L Romani). We hope that this issue will let you taste the flavours, hear the sounds and see the colours of this exciting EUCAS edition. The very large participation in EUCAS 2013 has allowed debates on a wide range of topics, starting from the most basic studies on emergent materials up to the new developments in electronics and large scale applications. A round table on HTS Conductors was experimented for the first time gathering material scientists, wire manufacturers and device builders in a stimulating

  11. DETAIL OF EIGHTH (TOP) FLOOR AT CLAY AND 15TH STREETS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF EIGHTH (TOP) FLOOR AT CLAY AND 15TH STREETS SHOWING ORNAMENTAL TERRA COTTA BANDING AND RELIEF PANELS. WINDOWS, WINDOW FRAMES, AND METAL CORNICE REMOVED - John Breuner & Company Building, 1515 Clay Street, Oakland, Alameda County, CA

  12. first floor plan, building section, west elevation, south elevation, baseboard ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    first floor plan, building section, west elevation, south elevation, baseboard profile, crown molding profile, window and door details - Cedar Pass Lodge, Cabin 22, 20681 South Dakota Highway 240, Interior, Jackson County, SD

  13. first floor plan, west elevation, north elevation, building section, door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    first floor plan, west elevation, north elevation, building section, door details, window details, paneling details, crown molding and location map - Cedar Pass Lodge, Cabin 14-16, 20681 South Dakota Highway 240, Interior, Jackson County, SD

  14. first floor plan, north elevation, east elevation, building section, door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    first floor plan, north elevation, east elevation, building section, door details, window details, crown molding and location map - Cedar Pass Lodge, Cabin 9, 20681 South Dakota Highway 240, Interior, Jackson County, SD

  15. 12. Interior, guest suite on the second floor. Plaster ceiling ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Interior, guest suite on the second floor. Plaster ceiling with stencilled border design, plaster molded cornice, and window frame detail. - Trenton House Hotel, 20-24 North Warren Street & 1-19 East Hanover Street, Trenton, Mercer County, NJ

  16. DETAIL OF ORNAMENTAL TERRA COTTA FRIEZE ABOVE GROUND FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF ORNAMENTAL TERRA COTTA FRIEZE ABOVE GROUND FLOOR AND TYPICAL TERRA COTTA WINDOW SILL. CORNER OF CLAY AND 15TH STREETS - John Breuner & Company Building, 1515 Clay Street, Oakland, Alameda County, CA

  17. 17. INTERIOR VIEW (WEST) AT TOP OF THE SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. INTERIOR VIEW (WEST) AT TOP OF THE SECOND FLOOR STAIRS SHOWING TRIPLE-HUNG WINDOW WITH ORIGINAL SIDELIGHTS AT LANDING LEVEL - Hamilton Grange, (Moved From) 237 West 141 Street to 141st Street & Amsterdam, New York County, NY

  18. 29. FIRST FLOOR, SOUTHWEST ROOM: DOUBLE DOOR CASE LOOKING EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. FIRST FLOOR, SOUTHWEST ROOM: DOUBLE DOOR CASE LOOKING EAST INTO SOUTHEAST ROOM. This case is typical for all double doors and triple windows in southeast and southwest rooms - Robinson-Aiken House, 48 Elizabeth Street, Charleston, Charleston County, SC

  19. Southwest elevation, roof plan, site plan & main floor plan, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Southwest elevation, roof plan, site plan & main floor plan, loft plan, section looking east, north window head detail - Richard Buckminster Fuller & Anne Hewlett Fuller Dome Home, 407 South Forest Avenue, Carbondale, Jackson County, IL

  20. Interior, first floor southeast side of building, showing french doors ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, first floor southeast side of building, showing french doors and interior windows - Fitzsimons General Hospital, Open Air Tuberculosis Ward, West Pennington Avenue & North Hickey Street Southwest Corner, Aurora, Adams County, CO

  1. 21. View of second floor of the Cherry Hill lettuce ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. View of second floor of the Cherry Hill lettuce shed looking towards window - Richmond Hill Plantation, Cherry Hill Lettuce Shed, East of Richmond Hill on Ford Neck Road, Richmond Hill, Bryan County, GA

  2. 7. VIEW OF SHAFT ON FIRST FLOOR, SHOWING COUNTERWEIGHT AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW OF SHAFT ON FIRST FLOOR, SHOWING COUNTERWEIGHT AND ITS GUIDE AT LEFT, OPERATING CABLE AT RIGHT, CARLIGHT ELECTRIC CABLE IS LOOPED IN FRONT OF WINDOW - 72 Marlborough Street, Residential Hydraulic Elevator, Boston, Suffolk County, MA

  3. 22. North Plant Interior, First Floor showing Representative Glass Block ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. North Plant Interior, First Floor showing Representative Glass Block Windows along Northwest Wall, Looking Northwest - Atwater Kent Manufacturing Company, North Plant, 5000 Wissahickon Avenue, Philadelphia, Philadelphia County, PA

  4. 23. Interior view of SE corner of first floor of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. Interior view of SE corner of first floor of 1896 south section of building, showing windows and column. Camera pointed SE. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  5. 29. SECOND FLOOR EAST SIDE APARTMENT EAST BEDROOM INTERIOR. ALUMINUMFRAME ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. SECOND FLOOR EAST SIDE APARTMENT EAST BEDROOM INTERIOR. ALUMINUM-FRAME SLIDING-GLASS WINDOWS ARE REPLACEMENTS. VIEW TO NORTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  6. Looking northwest, first floor, South Wing, Paleontology Lab. The quarry ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking northwest, first floor, South Wing, Paleontology Lab. The quarry wall can be seen through the window - Quarry Visitor Center, U.S. Highway 40, 8 miles north of Jensen, Jensen, Uintah County, UT

  7. Interior of the second floor dance hall showing tall and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of the second floor dance hall showing tall and narrow window openings with 10-foot scale near center, looking south. - Bower Building, 409-413 East Weber Avenue, Stockton, San Joaquin County, CA

  8. 13. Interior view, stairwell on third floor showing ornate jewels ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Interior view, stairwell on third floor showing ornate jewels and stained glass, double hung window with symmetrically molded trim and corner blocks - 535 Main Street (House), 535 Main Street, East Hartford, Hartford County, CT

  9. INTERIOR VIEW OF ENTRY. SHOWING THE STAINED CONCRETE FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF ENTRY. SHOWING THE STAINED CONCRETE FLOOR AND WINDOW WITH DIAMOND PATTERN MUNTINS. VIEW FACING NORTHWEST. - Hickam Field, Officers' Housing Type F, 602 Beard Avenue, Honolulu, Honolulu County, HI

  10. 11. West room, first floor. View looking east. Front porch ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. West room, first floor. View looking east. Front porch visible through window. - Fort Hill Farm, Mansion, West of Staunton (Roanoke) River between Turkey & Caesar's Runs, Clover, Halifax County, VA

  11. 14. South room first floor. View looking south. East porch ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. South room first floor. View looking south. East porch visible through window. - Fort Hill Farm, Mansion, West of Staunton (Roanoke) River between Turkey & Caesar's Runs, Clover, Halifax County, VA

  12. Campus Computing, 2000: The 11th National Survey of Computing and Information Technology in American Higher Education.

    ERIC Educational Resources Information Center

    Green, Kenneth C.

    The 2000 Campus Computing Survey, the 11th such survey, was sent to the chief academic officer at 1,176 two-year and four-year colleges and universities across the United States. By October 2000, 506 responses had been received, a response rate of 43%. New data reveal that the growing demand for technology talent across all sectors of the U.S.…

  13. Estimating the Effects of September 11th and Other Forms of Violence on the Mental Health and Social Development of New York City's Youth: A Matter of Context

    ERIC Educational Resources Information Center

    Aber, J. Lawrence; Gershoff, Elizabeth T.; Ware, Angelica; Kotler, Jennifer A.

    2004-01-01

    This longitudinal study examines the effects of exposure to the terrorist attack of September 11th as well as exposure to other forms of community violence on change in the mental health and social attitudes of youths in New York City. Three quarters of the youths reported some form of direct exposure to the events of September 11th, and 80%…

  14. The Minnesota 11th and 12th Grade Post-Secondary Enrollment Options Program: Is It Changing the Traditional Structure of Secondary and Post-Secondary Schools?

    ERIC Educational Resources Information Center

    Boughton, Roger W.

    In 1985, the Minnesota Legislature passed legislation permitting and encouraging 11th and 12th grade students attending public high schools to enroll in public and private postsecondary institutions. Approximately 2% of all 11th and 12th grade students in the state took part in the program during its first year of operation, with the majority of…

  15. PREFACE 11th Europhysical Conference on Defects in Insulating Materials (EURODIM 2010)

    NASA Astrophysics Data System (ADS)

    Kovács, László; Corradi, Gábor

    2010-11-01

    The Europhysical Conference on Defects in Insulating Materials, organized in the period 12-16 July 2010 in Pécs, Hungary by the Research Institute for Solid State Physics and Optics, Budapest and the Institute of Physics of the University of Pécs, was the 11th European conference in the alternate series of EURODIM and ICDIM. The first meeting in Argonne, USA in 1956 was dedicated to the field of color centers in alkali halide crystals. Since then the topic has been gradually extended to the real structure of oxides, halides, nitrides and other more complex insulators, and also to less ordered materials like glasses, ceramics and low-dimensional systems, as well as applications e.g. in radiology, non-linear optics, photonics and electronics. Recently the field covered includes the research and technology of defect-related phenomena in crystalline and amorphous wide band-gap bulk, layered and nano-materials. More than 200 colleagues from 31 countries in Europe, Asia, Africa and the Americas have participated in the conference. The program contained in addition to seven invited and three keynote talks 67 further oral presentations as well as some 200 poster contributions. The city of Pécs, a pearl of the Southern Danubia region, was proud of hosting the conference as one of the 2010 European Capitals of Culture, this status crowning a long urban history dating back to paleochristian times in the Roman province Pannonia. On behalf of the Organizing Committee signature László Kovács Conference Chair Conference Chair László Kovács Crystal Physics Department Research Institute for Solid State Physics and Optics Budapest, Hungary e-mail: eurodim2010@optics.szfki.kfki.hu Program Committee Gábor Corradi (Hungary) István Földvári (Hungary) Rob A. Jackson (UK) László Kovács (Hungary) Martin Nikl (Czech Republic) Anna Vedda (Italy) Andrea Watterich (Hungary) International Advisory Committee M.G. Blanchin (France)A. Lushchik (Estonia) F. Bridges (USA

  16. PREFACE: 11th International Conference on Damage Assessment of Structures (DAMAS 2015)

    NASA Astrophysics Data System (ADS)

    Wahab, M. A.

    2015-07-01

    This volume contains the proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS) 2015. DAMAS has a long history of almost 20 years. The first DAMAS conference took place in 1995 (Pescara, Italy), followed by a biannual meeting in 1997 (Sheffield, UK), 1999 (Dublin, Ireland), 2001 (Cardiff, UK), 2003 (Southampton, UK), 2005 (Gdansk, Poland), 2007 (Torino, Italy), 2009 (Beijing, China), 2011 (Oxford, UK) and 2013 (Dublin, Ireland). The eleventh edition of DAMAS conference series, DAMAS 2015, is hosted by Ghent University, Belgium, and is held at the congress center Het Pand in Ghent city. Ghent is the capital and the largest city of the East Flanders province of the Flemish region of Belgium. Het Pand is the culture and congress center of Ghent University and is a historical monument. The conference is established as a major international forum for research topics relevant to damage assessment of engineering structures and systems including numerical simulations, signal processing of sensor measurements and theoretical techniques as well as experimental case studies. The presentations of DAMAS 2015 are divided into 6 main sessions, namely 1) Structural Health and Condition Monitoring, 2) Damage in Civil Engineering, 3) Damage in Machineries, 4) Damage in Composite Materials, 5) Sensing and Sensors and 6) Signal Processing. The organising committee is grateful to keynote speakers; Professor Guido De Roeck, Head of Structural Mechanics Division, KULeuven, Belgium, for his keynote lecture entitled 'Structural Health Monitoring: highlights and challenges', Professor Weidong Zhu, Department of Mechanical Engineering, University of Maryland, USA, for his keynote lecture entitled 'Vibration-based Structural Damage Detection: Theory and Applications' and Professor Wieslaw Ostachowicz, Head of the Laboratory of Active Materials and Smart Structures, Polish Academy of Sciences, Poland, for his keynote lecture entitled 'Damage Assessment and

  17. PREFACE: 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers

    NASA Astrophysics Data System (ADS)

    Takizuka, Tomonori

    2008-07-01

    This volume of Journal of Physics: Conference Series contains papers based on invited talks and contributed posters presented at the 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers. This meeting was held at the Tsukuba International Congress Center in Tsukuba, Japan, on 26-28 September 2007, and was organized jointly by the Japan Atomic Energy Agency and the University of Tsukuba. The previous ten meetings in this series were held in San Diego (USA) 1987, Gut Ising (Germany) 1989, Abingdon (UK) 1991, Naka (Japan) 1993, Princeton (USA) 1995, Kloster Seeon (Germany) 1997, Oxford (UK) 1999, Toki (Japan) 2001, San Diego (USA) 2003, and St Petersburg (Russia) 2005. The purpose of the eleventh meeting was to present and discuss new results on H-mode (edge transport barrier, ETB) and internal transport barrier, ITB, experiments, theory and modeling in magnetic fusion research. It was expected that contributions give new and improved insights into the physics mechanisms behind high confinement modes of H-mode and ITBs. Ultimately, this research should lead to improved projections for ITER. As has been the tradition at the recent meetings of this series, the program was subdivided into six topics. The topics selected for the eleventh meeting were: H-mode transition and the pedestal-width Dynamics in ETB: ELM threshold, non-linear evolution and suppression, etc Transport relations of various quantities including turbulence in plasmas with ITB: rotation physics is especially highlighted Transport barriers in non-axisymmetric magnetic fields Theory and simulation on transport barriers Projections of transport barrier physics to ITER For each topic there was an invited talk presenting an overview of the topic, based on contributions to the meeting and on recently published external results. The six invited talks were: A Leonard (GA, USA): Progress in characterization of the H-mode pedestal and L-H transition N Oyama (JAEA, Japan): Progress and issues in

  18. PREFACE: 11th International Conference on Electrorheological Fluids and Magnetorheological Suspensions

    NASA Astrophysics Data System (ADS)

    Odenbach, Stefan; Borin, Dmitry

    2009-07-01

    Materials with properties controllable by external fields become more and more important for modern product design. Magnetorheological suspensions, electrorheological fluids and ferrofluids are classical examples for such smart materials exhibiting magnetic or electric field dependent properties. Their development over the past 60 years has shown how complex research and development of fluids with tailored properties can be. The demands of potential applications are the driving force for the synthesis of new fluids. The changes in the synthetic process and the composition of the fluids based on an increasing understanding of the relevant microscopic processes leads to certain macroscopic properties of the material. Only intense cooperation between basic and application oriented research, synthesis, characterisation, theory and application design can finally lead to fluids suitable for the envisaged use. The International Conferences on Electrorheological Fluids and Magnetorheological Suspensions have provided over more than 20 years a platform for interdisciplinary discussions strengthening the scientific progress in the field. Besides being a forum for scientific exchange about recent developments in electro- and magnetorheological fluids. The 11th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR08) which has been organized by the chair of Magnetofluiddynamics at the Technische Universität Dresden in August 2008 in Dresden has continued this fruitful tradition. With more than 180 participants from 24 different countries it has been the largest ERMR meeting during the last decade - a tendency showing the high potential and promising development of the field of electrically and magnetically controllable fluids. A significant proportion of the participants were PhD students, a fact that also highlights the sustainability of the field. In total 85 oral presentations - including 8 plenary talks - and 81 posters were

  19. Interior view of loading dock, main floor, looking east. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of loading dock, main floor, looking east. View shows roof truss system, elevated dock floor, and metal roll-up doors with metal casement windows above them - Southern Pacific Railroad Depot, Railroad Terminal Post Office & Express Building, Fifth & I Streets, Sacramento, Sacramento County, CA

  20. 24. Interior view of third floor attic of 1896 south ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. Interior view of third floor attic of 1896 south section of building. Note steel truss supports and wooden roof. Top floor round window in seen from outside in photo WA-116-A-2. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  1. CAVE WINDOW

    DOEpatents

    Levenson, M.

    1960-10-25

    A cave window is described. It is constructed of thick glass panes arranged so that interior panes have smaller windowpane areas and exterior panes have larger areas. Exterior panes on the radiation exposure side are remotely replaceable when darkened excessively. Metal shutters minimize exposure time to extend window life.

  2. PREFACE: 11th International Conference on Nucleus-Nucleus Collisions (NN2012)

    NASA Astrophysics Data System (ADS)

    Li, Bao-An; Natowitz, Joseph B.

    2013-03-01

    The 11th International Conference on Nucleus-Nucleus Collisions (NN2012) was held from 27 May to 1 June 2012, in San Antonio, Texas, USA. It was jointly organized and hosted by The Cyclotron Institute at Texas A&M University, College Station and The Department of Physics and Astronomy at Texas A&M University-Commerce. Among the approximately 300 participants were a large number of graduate students and post-doctoral fellows. The Keynote Talk of the conference, 'The State of Affairs of Present and Future Nucleus-Nucleus Collision Science', was given by Dr Robert Tribble, University Distinguished Professor and Director of the TAMU Cyclotron Institute. During the conference a very well-received public lecture on neutrino astronomy, 'The ICEcube project', was given by Dr Francis Halzen, Hilldale and Gregory Breit Distinguished Professor at the University of Wisconsin, Madison. The Scientific program continued in the general spirit and intention of this conference series. As is typical of this conference a broad range of topics including fundamental areas of nuclear dynamics, structure, and applications were addressed in 42 plenary session talks, 150 parallel session talks, and 21 posters. The high quality of the work presented emphasized the vitality and relevance of the subject matter of this conference. Following the tradition, the NN2012 International Advisory Committee selected the host and site of the next conference in this series. The 12th International Conference on Nucleus-Nucleus Collisions (NN2015) will be held 21-26 June 2015 in Catania, Italy. It will be hosted by The INFN, Laboratori Nazionali del Sud, INFN, Catania and the Dipartimento di Fisica e Astronomia of the University of Catania. The NN2012 Proceedings contains the conference program and 165 articles organized into the following 10 sections 1. Heavy and Superheavy Elements 2. QCD and Hadron Physics 3. Relativistic Heavy-Ion Collisions 4. Nuclear Structure 5. Nuclear Energy and Applications of

  3. Window type: paired 2x4 multipaned steel windows flanked by 1x4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Window type: paired 2x4 multipaned steel windows flanked by 1x4 multipaned steel casements, breaking building corner. Raised panel door front entry also illustrated. Ground floor detail Building 19, facing north - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA

  4. 31. SECOND FLOOR WEST SIDE APARTMENT LIVING ROOM INTERIOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    31. SECOND FLOOR WEST SIDE APARTMENT LIVING ROOM INTERIOR SHOWING PAIRED 4-LIGHT OVER 4-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS FLANKING ENTRY DOOR WITH UNUSUAL 8-LIGHT WINDOW. OPEN DOORWAY TO PHOTO LEFT LEADS TO KITCHEN. VIEW TO WEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  5. 25. SECOND FLOOR EAST SIDE APARTMENT KITCHEN INTERIOR SHOWING GROUP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. SECOND FLOOR EAST SIDE APARTMENT KITCHEN INTERIOR SHOWING GROUP OF THREE 6-LIGHT WOOD-FRAME CASEMENT WINDOWS OVER THE SINK, AND OPEN DOORWAY TO TOP OF EXTERIOR STAIR LANDING AND WALKWAY AT REAR OF HOUSE. WALKWAY IS VISIBLE THROUGH KITCHEN WINDOWS. VIEW TO SOUTH. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  6. Is the 10th and 11th Intercostal Space a Safe Approach for Percutaneous Nephrostomy and Nephrolithotomy?

    SciTech Connect

    Muzrakchi, Ahmed Al; Szmigielski, W. Omar, Ahmed J.S.; Younes, Nagy M.

    2004-09-15

    The aim of this study was to determine the rate of complications in percutaneous nephrostomy (PCN) and nephrolithotomy (PCNL) performed through the 11th and 10th intercostal spaces using our monitoring technique and to discuss the safety of the procedure. Out of 398 PCNs and PCNLs carried out during a 3-year period, 56 patients had 57 such procedures performed using an intercostal approach. The 11th intercostal route was used in 42 and the 10th in 15 cases. One patient had two separate nephrostomies performed through the 10th and 11th intercostal spaces. The technique utilizes bi-planar fluoroscopy with a combination of a conventional angiographic machine to provide anterior-posterior fluoroscopy and a C-arm mobile fluoroscopy machine to give a lateral view, displayed on two separate monitors. None of the patients had clinically significant thoracic or abdominal complications. Two patients had minor chest complications. Only one developed changes (plate atelectasis, elevation of the hemi-diaphragm) directly related to the nephrostomy (2%). The second patient had bilateral plate atelectasis and unilateral congestive lung changes after PCNL. These changes were not necessarily related to the procedure but rather to general anesthesia during nephrolithotomy. The authors consider PCN or PCNL through the intercostal approach a safe procedure with a negligible complication rate, provided that it is performed under bi-planar fluoroscopy, which allows determination of the skin entry point just below the level of pleural reflection and provides three-dimensional monitoring of advancement of the puncturing needle toward the target entry point.

  7. Supracostal Approach for PCNL: Is 10th and 11th Intercostal Space Safe According to Clavien Classification System?

    PubMed

    Kara, Cengiz; Değirmenci, Tansu; Kozacioglu, Zafer; Gunlusoy, Bulent; Koras, Omer; Minareci, Suleyman

    2014-01-01

    The purpose of this study was to evaluate the success and morbidity of percutaneous nephrolithotomy (PCNL) performed through the 11th and 10th intercostal space. Between March 2005 and February 2012, 612 patients underwent PCNL, 243 of whom had a supracostal access. The interspace between the 11th and 12th rib was used in 204 cases (group 1) and between the 10th and 11th interspaces in 39 cases (group 2). PCNL was performed using standard supracostal technique in all patients. The operative time, success rate, hospital stay, and complications according to the modified Clavien classification were compared between group 1 and group 2. The stone-free rate was 86.8% in group 1 and 84.6% in group 2 after one session of PCNL. Auxiliary procedures consisting of ureterorenoscopy (URS) and shock wave lithotripsy (SWL) were required in 5 and 7 patients, respectively, in group 1; and in 1 patient each in group 2 . After the auxiliary procedures, stone-free rates increased to 92.6% in group 1 and 89.7% in group 2. A total of 74 (30.4%) complications were documented in the 2 groups according to modified Clavien classification. Grade-I complications were recorded in 20 (8.2%), grade-II in 38 (15.6%), grade-IIIa in 13 (5.3%), and grade-IIIb in 2 (0.8%) patients; grade-IVa was recorded in 1 (0.4%) patient. There were no grade-IVb or grade-V complications. Overall complication rate was 30.9% in group 1 and 28.2% in group 2. Supracostal PCNL in selected cases is effective and safe with acceptable complications. The modified Clavien system provides a standardized grading system for complications of PCNL. PMID:25437600

  8. Cleaning up Floor Care.

    ERIC Educational Resources Information Center

    Carr, Richard; McLean, Doug

    1995-01-01

    Discusses how educational-facility maintenance departments can cut costs in floor cleaning through careful evaluation of floor equipment and products. Tips for choosing carpet detergents are highlighted. (GR)

  9. Follow-up of a cross-national comparison on flashbulb and event memory for the September 11th attacks.

    PubMed

    Curci, Antonietta; Luminet, Olivier

    2006-04-01

    Flashbulb memories are defined as vivid and long-lasting memories for the reception context of an important public event (Brown & Kulik, 1977). They are supposed to be triggered by both emotional reactions to the original event and rehearsal processes (Brown & Kulik, 1977; Finkenauer, Luminet, Gisle, El-Ahmadi, van der Linden, & Philippot, 1998; Neisser & Harsch, 1992). A test-retest design (21 vs 524 days after the event on average) was employed to assess flashbulb memory and event memory for the September 11th attacks and the impact of their emotional and rehearsal predictors in a sample of 985 respondents coming from six countries (i.e., Belgium, Italy, the Netherlands, Romania, Japan, and the USA). Results showed that national membership had a significant impact on event memory, and the emotional and rehearsal variables, but flashbulb memories for the September 11th attacks were found to be high and consistent across different countries. The implications of these findings for the debate about the nature and maintenance of flashbulb memories are discussed. PMID:16574589

  10. EDITORIAL: Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference Special issue featuring articles arising from the 11th High-Tech Plasma Processes Conference

    NASA Astrophysics Data System (ADS)

    Bruggeman, Peter; Degrez, Gérard; Delplancke, Marie-Paule; Gleizes, Alain

    2011-05-01

    The 11th High-Tech Plasma Processes Conference (HTPP) was held in Brussels, Belgium, 27 June-2 July, 2010. HTPP started as a thermal plasma conference and gradually expanded to include low-temperature plasmas. The conference was founded by Jacques Amouroux and Pierre Fauchais, and aims to bring together different scientific communities to facilitate contacts between science, technology and industry, providing a platform for the exploration of elementary processes and applications in and by plasmas. The first HTPP was held in Odeillo, France, in 1990. Since then it has been held every other year in different European cities: Paris, Aachen, Athens, Strasbourg, Saint-Petersburg, Patras and Brussels. The 11th HTPP conference was attended by 125 participants from 19 countries. The program involved 14 invited talks, 34 contributed talks, 72 posters and a software demonstration and hands-on session for plasma modelling. The 12th HTPP conference will be held 24-28 June 2012, in Bologna, Italy. A larger part of the contributions to the 11th HTPP has been published in the Journal of Physics: Conference Series (JPCS) volume 275, 2011. All invited speakers and other contributors, as selected by the Steering, Scientific and Organizing Committee, were invited to submit a paper based on their contributions for this special issue which is peer reviewed by the journal. Both this special issue and the JPCS volume aim to bring the 11th HTPP to a wider audience. The publications are a nice example of the broad topic range of the conference. The JPCS volume contains papers covering fundamental aspects on radiative processes of thermal plasmas, modelling of thermal arcs and non-thermal RF plasma jets, plasma diagnostics including flow and heat flux measurements of thermal plasmas, radical density measurements and laser-induced breakdown spectroscopy. The applications-oriented contributions of the JPCS volume include plasma spraying, synthesis of (nano-sized) materials, surface

  11. INTERIOR OF BUILDING 2, TYPICAL OFFICE (#212) WINDOW AND HEAT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF BUILDING 2, TYPICAL OFFICE (#212) WINDOW AND HEAT REGISTER, SECOND FLOOR. FACING SOUTH - Roosevelt Base, Dispensary, Corner of Colorado Street & Richardson Avenue, Long Beach, Los Angeles County, CA

  12. View from window of southeast room (bed room no. 1), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View from window of southeast room (bed room no. 1), second floor, commandant's house, looking east across parade ground. - Fort Simcoe, Commandant's House & Blockhouse, Fort Simcoe Road, White Swan, Yakima County, WA

  13. Windows and stairway on the north side of the building ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Windows and stairway on the north side of the building (second floor) - Fitzsimons General Hospital, Nurses' Quarters, West Charlie Kelly Boulevard, North side, between South Reed Street & South Sheehan Street, Aurora, Adams County, CO

  14. Newel Post, Handrail and Baluster; Typical Window Sill; Stair Nosing; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Newel Post, Handrail and Baluster; Typical Window Sill; Stair Nosing; Northeast Porch Railing; Newel Post Drop; Second Floor Baseboard - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Engineer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  15. 23. DETAIL VIEW, WINDOW TO LEFT OF CENTRAL DOORWAY, FIRST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. DETAIL VIEW, WINDOW TO LEFT OF CENTRAL DOORWAY, FIRST FLOOR, LAND ELEVATION OF ENGINE HOUSE (4' x 5' negative) - Fairmount Waterworks, East bank of Schuylkill River, Aquarium Drive, Philadelphia, Philadelphia County, PA

  16. 4. DETAIL OF WINDOWS AND CORBELING ON FIFTH AND SIXTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. DETAIL OF WINDOWS AND CORBELING ON FIFTH AND SIXTH FLOORS OF SOUTH FRONT AND EAST ELEVATIONS, LOOKING NORTHWEST - Lembeck & Betz Eagle Brewery, Lager Brew House, 164-170 Ninth Street, Jersey City, Hudson County, NJ

  17. 5. Historic American Buildings Survey, December, 1959 DETAIL OF WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Historic American Buildings Survey, December, 1959 DETAIL OF WINDOW AND IRON GRILLE, FIRST FLOOR, CHESTNUT STREET FACADE. - Provident Life & Trust Company Bank, 407-409 Chestnut Street, Philadelphia, Philadelphia County, PA

  18. 7. DETAIL, NOTCHED ROUGH HEWN JOINTS AND BEAMS PLUS WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. DETAIL, NOTCHED ROUGH HEWN JOINTS AND BEAMS PLUS WINDOW UNDER 1ST FLOOR PORCH, SOUTH ELEVATION, LOOKING NORTH-NORTHWEST. - Fort Leavenworth, Building No. 17, 20-22 Sumner Place, Leavenworth, Leavenworth County, KS

  19. 10. VIEW OF THE ARCHED TRIPARTITE STEEL SASH WINDOW OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW OF THE ARCHED TRIPARTITE STEEL SASH WINDOW OF THE 2ND FLOOR WITH CAST IRON MOLDED PANEL BELOW AT FRONT ELEVATION. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  20. Selected contributions from the 11th Gas in Marine Sediments International Conference of September 2012, Nice: an introduction

    NASA Astrophysics Data System (ADS)

    Pierre, Catherine; Imbert, Patrice; Mascle, Jean

    2014-06-01

    This Introduction presents an overview of selected contributions from the 11th Gas in Marine Sediments International Conference held on the 4-7 September 2012 in Nice, France, and published in this special issue of Geo-Marine Letters under the guest editorship of Catherine Pierre, Patrice Imbert and Jean Mascle. These cover fluid seepage dynamics at widely varying spatiotemporal scales in a giant buried caldera of the Caspian Sea, mud volcanoes and pockmarks in the Mediterranean and adjoining Gulf of Cadiz, as well as Lake Baikal, pockmarks of shallower waters along the Atlantic French coast and in Baltic Sea lagoons, deepwater pockmarks and cold seeps on the Norwegian margin and the Hikurangi Margin of New Zealand, asphalt seepage sites offshore southern California, and the tectonically controlled southern Chile forearc. We look forward to meeting all again at the 12th Gas in Marine Sediments conference scheduled for 1-6 September 2014 in Taipei, Taiwan.

  1. Taking out one billion tones of carbon: the magic of China's 11thFive-Year Plan

    SciTech Connect

    Lin, Jiang; Zhou, Nan; Levine, Mark D.; Fridley, David

    2007-05-01

    China's 11th Five-Year Plan (FYP) sets an ambitious targetfor energy-efficiency improvement: energy intensity of the country sgross domestic product (GDP) should be reduced by 20 percent from 2005 to2010 (NDRC, 2006). This is the first time that a quantitative and bindingtarget has been set for energy efficiency, and signals a major shift inChina's strategic thinking about its long-term economic and energydevelopment. The 20 percent energy intensity target also translates intoan annual reduction of over one billion tons of CO2 by 2010, making theChinese effort one of most significant carbon mitigation effort in theworld today. While it is still too early to tell whether China willachieve this target, this paper attempts to understand the trend inenergy intensity in China and to explore a variety of options towardmeeting the 20 percent target using a detailed endues energymodel.

  2. Taking out 1 billion tons of CO2: The magic of China's 11th Five-Year Plan?

    SciTech Connect

    Zhou, Nan; Lin, Jiang; Zhou, Nan; Levine, Mark; Fridley, David

    2007-07-01

    China's 11th Five-Year Plan (FYP) sets an ambitious target for energy-efficiency improvement: energy intensity of the country's gross domestic product (GDP) should be reduced by 20% from 2005 to 2010 (NDRC, 2006). This is the first time that a quantitative and binding target has been set for energy efficiency, and signals a major shift in China's strategic thinking about its long-term economic and energy development. The 20% energy intensity target also translates into an annual reduction of over 1.5 billion tons of CO2 by 2010, making the Chinese effort one of most significant carbon mitigation effort in the world today. While it is still too early to tell whether China will achieve this target, this paper attempts to understand the trend in energy intensity in China and to explore a variety of options toward meeting the 20% target using a detailed end-use energy model.

  3. Rapid Economic Growth and Natural Gas Consumption Nexus: Looking forward from Perspective of 11th Malaysian Plan

    NASA Astrophysics Data System (ADS)

    Bekhet, H. A.; Yasmin, T.

    2016-03-01

    The present study investigates the relationship between economic growth and energy consumption by incorporating CO2 emissions, natural gas consumption and population in Malaysia. Annual data and F-bound test and granger causality have applied to test the existence of long run relationship between the series. The results show that variables are cointegrated for long run relationship. The results also indicate that natural gas consumption is an important contributing factor to energy demand and hence economic growth in case of Malaysia. The causality analysis highlights that the feedback hypothesis exists between economic growth and energy consumption. While, conservative hypothesis is validated between natural gas consumption and economic growth which implies that economic growth will push natural gas consumption policies in future. This study opens up new direction for policy makers to formulate a comprehensive natural gas policy to sustain environment for long span of time in case to achieve 11th MP targets.

  4. [Aortopulmonary window].

    PubMed

    González-Marín, María Arántzazu; Jiménez-Díaz, Javier; Centeno-Jiménez, Miriam; García-Cabezas, M Ángel

    2015-01-01

    The aortopulmonary window is a rare cause of heart failure in the neonate. It must be ruled out if there are signs of pulmonary edema without the most frequent left-right shunts. We report the echocardiographic images of a newborn who was admitted with symptoms of heart failure at our institution. PMID:25698530

  5. Window comparator

    NASA Technical Reports Server (NTRS)

    Black, J. M. (Inventor)

    1977-01-01

    A window comparator is described, comprising two operational amplifiers, one with two feedback circuits, each feedback circuit having a diode connected to the amplifier output and poled for forward current conduction of opposite polarity, to provide an algebraic difference between an input signal and a selected set-point voltage. Differential input terminals of the second operational amplifier were connected to the separate feedback circuits of the first operational amplifier, one input terminal to the output of one diode, and the other to the output of the other diode. A selected window-width voltage was connected through a coupling resistor to one of the input terminals of the second operational amplifier to determine when the algebraic difference of the input signal and the setpoint voltage has exceeded a predetermined tolerance after that difference has changed signs.

  6. 15. The third floor. A view looking south of a ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. The third floor. A view looking south of a typical corridor for these two upper floors. All windows have a single obscure glass light and shoulder high sills which bring sunlight into the corridor. The a/c duct, its laterals and the fluorescent light elements are all retrofit. - John T. Beasley Building, 632 Cherry Street (between Sixth & Seventh Streets), Terre Haute, Vigo County, IN

  7. Floors: Care and Maintenance.

    ERIC Educational Resources Information Center

    Post Office Dept., Washington, DC.

    Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…

  8. School Flooring Factors

    ERIC Educational Resources Information Center

    McGrath, John

    2012-01-01

    With all of the hype that green building is receiving throughout the school facility-management industry, it's easy to overlook some elements that may not be right in front of a building manager's nose. It is helpful to examine the role floor covering plays in a green building project. Flooring is one of the most significant and important systems…

  9. Maximizing Hard Floor Maintenance.

    ERIC Educational Resources Information Center

    Steger, Michael

    2000-01-01

    Explains the maintenance options available for hardwood flooring that can help ensure long life cycles and provide inviting spaces. Developing a maintenance system, knowing the type of traffic that the floor must endure, using entrance matting, and adhering to manufacturers guidelines are discussed. Daily, monthly or quarterly, and long-term…

  10. A&M. TAN607 floor plan for first floor. Shows stepped door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plan for first floor. Shows stepped door plug design from hot shop into special services cubicle, cubicle windows, and other details. This drawing was re-drawn to show as-built conditions in 1985. Ralph M. Parsons 902-3-ANP-607-A 99. Date of original: January 1955. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106751 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  11. DETAIL VIEW, CENTER FIRSTFLOOR WINDOW IN WEST WALL. ORIGINALLY, THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, CENTER FIRST-FLOOR WINDOW IN WEST WALL. ORIGINALLY, THE EXTERIOR OF THE HOUSE WAS, AT THE VERY LEAST, LIMED, AND POSSIBLY STUCCOED. THUS, THE CONTRAST BETWEEN THE NEATLY CRAFTED BRICK WINDOW SURROUNDS AND THE STONE WALL WOULD HAVE BEEN REDUCED - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  12. 33. DETAIL VIEW OF THE WEST WINDOW AT THE FIRST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. DETAIL VIEW OF THE WEST WINDOW AT THE FIRST FLOOR LEVEL OF THE TOWER (NOTE LEVEL OF ARCHITECTURAL FINISH SEEN IN THE ROUNDHEADED WINDOW WITH ITS ROUND-ARCHED, BROWNSTONE HOOD THAT TERMINATES IN BRACKETS AS WELL AS IN THE STRINGCOURSE AND IN BRICK INSET-PANELING BELOW THE BROWNSTONE SILL) - Kenworthy Hall, State Highway 14 (Greensboro Road), Marion, Perry County, AL

  13. The behavioral impacts of firm-level energy-conservation goals in China's 11th five-year plan.

    PubMed

    Wu, Dan; Xu, Yuan; Leung, Yee; Yung, Chor Wing

    2015-01-01

    Energy efficiency is one of the most effective means of curbing energy consumption and associated pollutant emissions. However, energy-saving opportunities at negative net costs, or an energy-efficiency gap, widely exist and they defy an entirely rational explanation. This paper examines the significant overperformance of energy-intensive firms against their assigned energy-conservation goals in a national program in China's 11th Five-Year plan (2006-2010). Higher energy prices can be only partially responsible for more active energy saving. Behavioral constraints are explained to cause the bounded rationality of firms on energy-efficiency investment. As our theoretical and empirical studies show, energy-conservation goals could overcome such behavioral constraints to accelerate the commercialization of energy-efficiency technologies, reduce uncertainty and hesitancy of relevant investment, facilitate the enrichment of information, and concentrate the attention of firms on energy conservation. We conclude that goal-setting could provide an effective complementary policy instrument in dealing with energy conservation in China and possibly in other parts of the world. PMID:25478688

  14. Has the Mediterranean Sea Felt the March 11th, 2011, M 9.0 Tohoku-Oki Earthquake (japan) ?

    NASA Astrophysics Data System (ADS)

    Anzidei, M.; Vecchio, A.; Carbone, V.; Arena, G.

    2011-12-01

    Sea level recordings from about 200 available tide gauge stations located along the coast of Japan and elsewhere in the world, including the Mediterranean basin, were analysed to investigate the far field effects of the giant tsunami caused by the March 11th, 2011, M 9.0 Tohoku-Oki earthquake. The tsunami was generated offshore the Honshu island (Japan) and propagated in the Oceans. While the near field tide gauge stations show a saturated signal due to the very high tsunami waves, the Mediterranean tide gauge stations have likely recorded a weak signal that disturbed the daily tidal trends. In this report we briefly show and discuss the analysis of tidal data from some selected tide gauge stations located in the Mediterranean sea, including the Italian tide gauge network consisting in 30 stations. Global sea level data were retrieved by internet from IOC (http://www.ioc-sealevelmonitoring.org/) and ISPRA for the Italian region(http://www.mareografico.it/). Tidal data were reduced for inverse barometric correction and analyzed by an advanced filtering technique that decomposes a non-stationary time series X(t) through oscillating modes, identifying the contributions at different timescales of the tidal variations. Finally, we focused on the dynamical behavior of low-frequency processes and trends.

  15. Using Guided Notes to Increase the Understanding of Anatomy and Physiology in 11th Grade Science Students

    NASA Astrophysics Data System (ADS)

    Mariano, Jay

    A survey of over 500 science teachers reported that two thirds of their science classes were lecture based lessons where students were required to listen and take notes (Boyle, 2010). In addition to taking notes from lectures, note taking is a necessary skill to possess to record scientific observations and procedures and record information during class. Guided notes is a pedagogical method in which the instructor prepares and provides students with a modified form of lecture information to guide students (Neef, McCord, & Ferreri, 2006). This study examined the extent to which the use of guided notes in a unit of study of the muscular system of anatomy and physiology positively affected the mastery on content-based assessments for 11 th grade students. The data collection methods included quiz and test scores, a 4-point Likert scale survey, and an open-ended questionnaire. Results of the data revealed that guided notes was one factor that led to mastery in learning content. Additionally, students in this study preferred this method as it helped them to distinguish relevant information allowing more time to listen and focus on the teacher.

  16. Unfolding the complexities of ER chaperones in health and disease: report on the 11th international calreticulin workshop.

    PubMed

    Gold, Leslie; Williams, David; Groenendyk, Jody; Michalak, Marek; Eggleton, Paul

    2015-11-01

    The 11th International Calreticulin workshop was held May 15-18, 2015 at New York University School of Medicine-Langone Medical Center, New York. The meeting highlighted many of the new discoveries in the past 2 years involving the important role of molecular chaperones in physiological and pathological processes. Crucial to the understanding of these disease processes was the role of chaperones in maintaining quality control of protein processing in the endoplasmic reticulum, the importance of Ca(2) regulation acting through its action in stress-related diseases, and the trafficking of glycoproteins to the cell surface. Central to maintaining healthy cell physiology is the correct ER-associated protein degradation of specific misfolded proteins. Information on different mechanisms involved in the degradation of misfolded proteins was revealed. This was a landmark meeting for the chaperone field in terms of new insights into their roles in physiology. These insights included the unfolded protein response, innate/adaptive immunity, tissue repair, the functions of calreticulin/chaperones from the cell surface, and extracellular environment. Diseases included neurodegenerative disorders, prion disease, autoimmunity, fibrosis-related disease, the host immune response to cancer, and hematologic diseases associated with calreticulin mutations. The 12th calreticulin workshop is planned for the spring of 2017 in Delphi, Greece. PMID:26395641

  17. Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan

    SciTech Connect

    Zhou, Nan; McNeil, Michael; Levine, Mark

    2010-06-07

    China's 11th Five-Year Plan (FYP) sets an ambitious target to reduce the energy intensity per unit of gross domestic product (GDP) by 20% from 2005 to 2010 (NDRC, 2006). In the building sector, the primary energy-saving target allocated during the 11 FYP period is 100 Mtce. Savings are expected to be achieved through the strengthening of enforcement of building energy efficiency codes, existing building retrofits and heat supply system reform, followed by energy management of government office buildings and large scale public buildings, adoption of renewable energy sources. To date, China has reported that it achieved the half of the 20% intensity reduction target by the end of 2008, however, little has been made clear on the status and the impact of the building programs. There has also been lack of description on methodology for calculating the savings and baseline definition, and no total savings that have been officially reported to date. This paper intend to provide both quantitative and qualitative assessment of the key policies and programs in building sector that China has instituted in its quest to fulfill the national goal. Overall, this paper concludes that the largest improvement for building energy efficiency were achieved in new buildings; the program to improve the energy management in government and large scale public buildings are in line with the target; however the progress in the area of existing building retrofit particularly heat supply system reform lags the stated goal by a large amount.

  18. Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan

    SciTech Connect

    Zhou, Nan; Mcneil, Michael; Levine, Mark

    2011-03-01

    China's 11th Five-Year Plan (FYP) sets an ambitious target to reduce the energy intensity per unit of gross domestic product (GDP) by 20% from 2005 to 2010 (NDRC, 2006). In the building sector, the primary energy-saving target allocated during the 11 FYP period is 100 Mtce. Savings are expected to be achieved through the strengthening of enforcement of building energy efficiency codes, existing building retrofits and heat supply system reform, followed by energy management of government office buildings and large scale public buildings, adoption of renewable energy sources. To date, China has reported that it achieved the half of the 20% intensity reduction target by the end of 2008, however, little has been made clear on the status and the impact of the building programs. There has also been lack of description on methodology for calculating the savings and baseline definition, and no total savings that have been officially reported to date. This paper intends to provide both quantitative and qualitative assessment of the key policies and programs in building sector that China has instituted in its quest to fulfill the national goal. Overall, this paper concludes that the largest improvement for building energy efficiency were achieved in new buildings; the program to improve the energy management in government and large scale public buildings are in line with the target; however the progress in the area of existing building retrofits, particularly heating supply system reform lags behind the stated goal by a large amount.

  19. Pelvic floor muscle training exercises

    MedlinePlus

    Pelvic floor muscle training exercises are a series of exercises designed to strengthen the muscles of the pelvic floor. ... Pelvic floor muscle training exercises are recommended for: Women ... Men with urinary stress incontinence after prostate surgery ...

  20. The Advanced Program of Vocational Agriculture in Louisiana. Ag III and Ag IV (11th and 12th Grades). Volume II. Bulletin No. 1725.

    ERIC Educational Resources Information Center

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide consists of materials for use in teaching an advanced course in agricultural mechanics designed for 11th and 12th grade students. Addressed in the individual units of the guide are arc welding; oxy-acetylene welding; soldering; electricity; tractor maintenance, operation, and safety; small engines; farm structures; and cold…

  1. An Assessment of 4th, 8th, and 11th Grade Students' Knowledge Related to Marine Science and Natural Resource Issues.

    ERIC Educational Resources Information Center

    Brody, Michael J.; Koch, Helmut

    In an effort to contribute information for science teachers and curriculum developers in Maine, this study generated base line data on 4th, 8th, and 11th grade students' knowledge of marine science and natural resources principles in relation to the Gulf of Maine. Five concept maps representing 15 major content principles were developed. Two…

  2. Post-September 11Th Perspectives on Religion, Spirituality, and Philosophy in the Personal and Professional Lives of Selected REBT Cognoscenti

    ERIC Educational Resources Information Center

    Weinrach, Stephen G.; Dryden, Windy; DiMattia, Dominic J.; Doyle, Kristene A.; MacLaren, Catherine; O'Kelly, Monica; Malkinson, Ruth

    2004-01-01

    The purpose of this article was for selected Rational Emotive Behavior Therapy (REBT) cognoscenti to examine the impact of the events of September 11th, 2001, on their beliefs about religion, spirituality and their personal philosophy--including the role of evil in the universe and the implications of these issues on their use of REBT. The degree…

  3. Correlations among Five Demographic Variables and the Performance of Selected Jamaican 11th-Graders on Some Numerical Problems on Energy

    ERIC Educational Resources Information Center

    Emepue, Nicholas; Soyibo, Kola

    2009-01-01

    This study was designed to assess whether the level of performance of selected Jamaican 11th-grade physics students on some numerical problems on the energy concept was satisfactory and if there were significant differences in their performance linked to their gender, socioeconomic background (SEB), school location, English language and…

  4. Relationships among Four Learner Variables and the Performance of Selected Jamaican 11th-Graders on Some Structured Questions on the Mole Concept

    ERIC Educational Resources Information Center

    Ellis-Hall, Nadine; Soyibo, Kola

    2004-01-01

    This study sought to find out if (a) the performance of 113 Jamaican 11th-graders on a mole concept test was satisfactory or not; (b) there were significant differences in their performance linked to their chemical and mathematical abilities, gender and socioeconomic background (SEB); and, (c) there were significant relationships among the four…

  5. Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Mobile Learning (11th, Madeira, Portugal, March 14-16, 2015)

    ERIC Educational Resources Information Center

    Sánchez, Inmaculada Arnedillo, Ed.; Isaías, Pedro, Ed.

    2015-01-01

    These proceedings contain the papers and posters of the 11th International Conference on Mobile Learning 2015, which was organised by the International Association for Development of the Information Society, in Madeira, Portugal, March 14-16, 2015. The Mobile Learning 2015 Conference seeks to provide a forum for the presentation and discussion of…

  6. Post-September 11Th Perspectives on Religion, Spirituality, and Philosophy in the Personal and Professional Lives of Selected Rebt Cognoscenti: A Response to My Colleagues.

    ERIC Educational Resources Information Center

    Ellis, Albert

    2004-01-01

    This is a discussion and evaluation of the views of the authors of the article "Post-September 11th Perspectives on Religion, Spirituality, and Philosophy in the Personal and Professional Lives of Selected REBT Cognoscenti." Several of the authors are shown to endorse most of the main principles and practices of Rational Emotive Behavior Therapy…

  7. Proceedings of the International Conference on Cognition and Exploratory Learning in Digital Age (CELDA) (11th, Porto, Portugal, October 25-27, 2014)

    ERIC Educational Resources Information Center

    Sampson, Demetrios G., Ed.; Spector, J. Michael, Ed.; Ifenthaler, Dirk, Ed.; Isaias, Pedro, Ed.

    2014-01-01

    These proceedings contain the papers of the 11th International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA 2014), October 25-27, 2014, which has been organized by the International Association for Development of the Information Society (IADIS) and endorsed by the Japanese Society for Information and Systems in…

  8. PREFACE: 11th International Spring Seminar on Nuclear Physics: Shell Model and Nuclear Structure - achievements of the past two decades

    NASA Astrophysics Data System (ADS)

    2015-02-01

    The 11th International Seminar on Nuclear Physics was held in Ischia from May 12 to May 16, 2014. This Seminar was dedicated to Aldo Covello, who has been the promoter of this series of meetings, which started in Sorrento in 1986 and continued with meetings held every two or three years in the Naples area. Aldo's idea was to offer to a group of researchers, actively working in selected fields of Nuclear Physics, the opportunity to confront their points of view in a lively and informal way. The choice for the period of the year, Spring, as well as the sites chosen reflected this intent. The first meeting was of a purely theoretical nature, but it was immediately clear that the scope of these conferences needed to be enlarged calling into play the experimental community. Then, starting from the second meeting, all the following ones have been characterized by fruitful discussion between theoretical and experimental researchers on current achievements and future developments of nuclear structure. This may be read, in fact, as one of the motivating factors for Aldo's election as Fellow of the American Physical Society in 2008 "... for his outstanding contributions to the international nuclear physics community by providing, for over two decades, a venue for theorists and experimentalists to share their latest ideas." The present meeting, organized by Aldo's former students and with the benefit of his suggestions, has maintained this tradition. The title "Shell model and nuclear structure: achievements of the past two decades" recalls that of the 2nd International Spring Seminar "Shell Model and Nuclear Structure: where do we stand?". The main aim of this 11th Seminar was, in fact, to discuss the changes of the past two decades on our view of nuclei in terms of shell structure as well as the perspectives of the shell model, which has been one of the key points in Aldo's research. This point is well accounted by the Opening Speech of Igal Talmi, one of the fathers of the

  9. 5. STAIR FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHWEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. STAIR FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHWEST. Note extreme thin construction of support and outline of well ellipse on floor. Stair to first floor has been removed - Saltus-Habersham House, 802 Bay Street, Beaufort, Beaufort County, SC

  10. 22. FIRST FLOOR APARTMENT SOUTH BEDROOM INTERIOR SHOWING PAIRED 6LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. FIRST FLOOR APARTMENT SOUTH BEDROOM INTERIOR SHOWING PAIRED 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAMED WINDOWS. VIEW TO SOUTH. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  11. Exterior building details of Building D, west façade: second floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior building details of Building D, west façade: second floor metal multi-pane industrial-type sash windows; easterly view - San Quentin State Prison, Building 22, Point San Quentin, San Quentin, Marin County, CA

  12. 30. SECOND FLOOR EAST SIDE APARTMENT WEST BEDROOM INTERIOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. SECOND FLOOR EAST SIDE APARTMENT WEST BEDROOM INTERIOR SHOWING PAIRED 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS THROUGH NORTH WALL. ORIGINAL LOUVERED DOORS FRAME CLOSET AT PHOTO LEFT. VIEW TO NORTH. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  13. 14. FIRST FLOOR APARTMENT LIVING ROOM INTERIOR. FRONT ENTRY DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. FIRST FLOOR APARTMENT LIVING ROOM INTERIOR. FRONT ENTRY DOOR IS AT PHOTO CENTER FLANKED BY A PAIRED 4-LIGHT OVER 4-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS. OPEN DOORWAY TO PHOTO RIGHT OPENS TO NORTH BEDROOM. DOORWAY TO PHOTO LEFT OPENS TO KITCHEN. VIEW TO NORTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  14. 9. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE APARTMENT ENTRYWAY SHOWING STAIR LANDING AND OPEN FRONT DOOR FLANKED BY PAIRED 4-LIGHT OVER 4-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS. VIEW TO NORTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  15. 37. SECOND FLOOR WEST SIDE APARTMENT EAST BEDROOM INTERIOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. SECOND FLOOR WEST SIDE APARTMENT EAST BEDROOM INTERIOR SHOWING PAIRED 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS ON NORTH WALL. VIEW TO NORTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  16. 20. FIRST FLOOR APARTMENT NORTH BEDROOM INTERIOR LOOKING THROUGH DOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. FIRST FLOOR APARTMENT NORTH BEDROOM INTERIOR LOOKING THROUGH DOOR FROM LIVING ROOM. GROUP OF THREE 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS AT PHOTO CENTER THROUGH NORTH (FRONT) WALL OF HOUSE. VIEW TO EAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  17. 14. INTERIOR OF BEDROOM NUMBER TWO SHOWING FLOOR TO CEILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR OF BEDROOM NUMBER TWO SHOWING FLOOR TO CEILING BUILT-IN CLOSET OCCUPING ENTIRE NORTH END OF ROOM, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON EAST WALL. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

  18. 16. FIRST FLOOR APARTMENT KITCHEN INTERIOR SHOWING OPEN DOORWAY TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. FIRST FLOOR APARTMENT KITCHEN INTERIOR SHOWING OPEN DOORWAY TO LIVING ROOM AND PAIRED 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS OVER SINK. VIEW TO EAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  19. 38. SECOND FLOOR WEST SIDE APARTMENT WEST BEDROOM INTERIOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    38. SECOND FLOOR WEST SIDE APARTMENT WEST BEDROOM INTERIOR SHOWING PAIRED 6-LIGHT OVER 6-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS ON WEST WALL AND OPEN DOORWAY TO LIVING ROOM. VIEW TO WEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  20. 23. SECOND FLOOR EAST SIDE APARTMENT LIVING ROOM INTERIOR. PAIRED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. SECOND FLOOR EAST SIDE APARTMENT LIVING ROOM INTERIOR. PAIRED 4-LIGHT OVER 1-LIGHT DOUBLE-HUNG, WOOD-FRAME WINDOWS FLANK ENTRY DOOR. DOORWAY AT PHOTO RIGHT OPENS TO KITCHEN. VIEW TO SOUTHEAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  1. Interior oblique view of unit living room in ground floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior oblique view of unit living room in ground floor of Building 6 from kitchen hall, looking northeast, showing radiator and barred windows - North Beach Place, 401 Bay Street, 500 Francisco Street, 401 Bay Street, 500 Francisco Street, San Francisco, San Francisco County, CA

  2. 10. INTERIOR, FIRST FLOOR, GENERAL VIEW FROM WEST ROOM TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR, FIRST FLOOR, GENERAL VIEW FROM WEST ROOM TO EAST ROOM. NORTH SIDE OF ROOM SOUTHWEST TO NORTHEAST SHOWS FIREPLACE, DOUBLE DOORS (SLIDING) AND WINDOW TO PORCH. - P. A. Bowen House, 15701 Dr. Bowen Road, Aquasco, Prince George's County, MD

  3. 11. Interior view of first floor of 1922 north section, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Interior view of first floor of 1922 north section, showing east wall and windows at far north end of building. Camera pointed E. Rear of building is partially visible on far left. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  4. Facility 171 Interior view of second floor hall showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Facility 171 - Interior view of second floor hall showing original tile and windows. View facing north - U.S. Naval Base, Pearl Harbor, Latrine Dry Dock No. 2 & Latrine Dry Dock No.3, Near Avenue G adjacent to Dry Dock No. 2 & Dry Dock No. 3, Pearl City, Honolulu County, HI

  5. 21. DETAIL OF AREA WHERE FIRST FLOOR PASSAGEWAY USED TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. DETAIL OF AREA WHERE FIRST FLOOR PASSAGEWAY USED TO BE SHOWING VERTICAL WOOD MOLDING COVERING JOINT WHERE PARTITION USED TO BE (LEFT), TELLER'S WINDOW LINKING PASSAGEWAY WITH INFORMATION BOOTH (CENTER), AND TYPICAL FURNITURE. VIEW TO EAST. - Boise Project, Boise Project Office, 214 Broadway, Boise, Ada County, ID

  6. 9. GENERAL INTERIOR VIEW OF BEEF KILLING FLOOR; LOOKING SOUTHEAST; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. GENERAL INTERIOR VIEW OF BEEF KILLING FLOOR; LOOKING SOUTHEAST; PLATFORMS IN FOREGROUND WERE USED BY SPLITTERS, TRIMMERS AND GOVERNMENT INSPECTORS; SKINNING TABLE RAN ALONG THE WINDOWS NEAR THE CENTER OF THE PHOTO - Rath Packing Company, Beef Killing Building, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

  7. 48. Interior view of the second floor, looking from the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. Interior view of the second floor, looking from the northeast to the southwest generally (note common rafter roof and collar beams as well as the ghosts of dormer windows in the west side - Kiskiack, Naval Mine Depot, State Route 238 vicinity, Yorktown, York County, VA

  8. 34. SECOND FLOOR WEST SIDE APARTMENT KITCHEN INTERIOR. DOORWAY AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. SECOND FLOOR WEST SIDE APARTMENT KITCHEN INTERIOR. DOORWAY AT PHOTO LEFT LEADS TO PANTRY. GROUP OF THREE 6-LIGHT WOOD-FRAME CASEMENT WINDOWS OPEN TO WALKWAY AT REAR OF BUILDING. VIEW TO SOUTH. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  9. 44. ADMINISTRATIVE OFFICES SECOND FLOOR This room was occupied ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. ADMINISTRATIVE OFFICES - SECOND FLOOR This room was occupied by the representatives of the California Fish and Game Commission. Fish oil storage tanks across Cannery Row are seen through the center window. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  10. 30. VIEW OF DRILL HALL FROM SECOND FLOOR EAST BALCONY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. VIEW OF DRILL HALL FROM SECOND FLOOR EAST BALCONY FACING WEST. SHOWS ALTERNATE BAY X BRACING OF ROOF TRUSSES. ALSO SHOWS TRUSSES, WINDOWS IN THE MONITOR, STAIRWAY AT THE SOUTHWEST CORNER OF THE DRILL HALL AND THE THREE LEVELS OF BENCHES ON THE BALCONY. - Yakima National Guard Armory, 202 South Third Street, Yakima, Yakima County, WA

  11. REACTOR SERVICES BUILDING, TRA635, INTERIOR. FIRST FLOOR. CAMERA IS ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REACTOR SERVICES BUILDING, TRA-635, INTERIOR. FIRST FLOOR. CAMERA IS ON FIRST FLOOR, FACING SOUTH. OFFICES NOW LINE CORRIDOR. WINDOWS AT UPPER LEVEL HAVE BEEN BRICKED IN. INL NEGATIVE NO. HD46-10-2. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  12. STI. DE-FG02-00ER1505 [Brief summary of 11th International Conference on Arabidopsis Research

    SciTech Connect

    2000-06-24

    The 11th International Conference on Arabidopsis Research was held in Madison, Wisconsin, June 24 through June 28, 2000. Arabidopsis thaliana has been the subject of genetic study for many years. However, during the last decade, the number of research laboratories using Arabidopsis as a model system has increased tremendously, and Arabidopsis is currently being used to study all aspects of plant biology. The rapid rate of progress in Arabidopsis research, including the completion of the genomic sequence, underscores the usefulness of holding a meeting every year. These conferences provide an important opportunity for the Arabidopsis community to interact and exchange information. The meeting opened with an evening keynote address on the global impact of plant biology, delivered by Richard Jefferson, the Executive Director of CAMBIA (Center for the Application of Molecular Biology to International Agriculture). This was followed by short updates from each of the NSF-funded Plant Genome groups. Many of these groups are carrying out projects that impact the Arabidopsis community. Each of the 17 platform sessions consisted of talks from two invited speakers followed by two short talks that were chosen from the submitted poster abstracts. A concerted effort was made to invite junior investigators, including graduate students and postdocs, to give these talks. Posters were available for viewing during three formal sessions, and, because the poster session was adjacent to the lecture hall, it was easy for participants to go back and forth between posters and lectures. Finally, a mixer and an informal banquet provided opportunities for participants to meet new people and renew acquaintances. Furthermore, the registration package included all lunches and dinners together in a cafeteria next to the posters and lecture hall, thus encouraging the meeting of established investigators with students and postdocs. The North American Arabidopsis Steering Committee (elected by

  13. Cooling Floor AC Systems

    NASA Astrophysics Data System (ADS)

    Jun, Lu; Hao, Ding; Hong, Zhang; Ce, Gao Dian

    The present HVAC equipments for the residential buildings in the Hot-summer-and-Cold-winter climate region are still at a high energy consuming level. So that the high efficiency HVAC system is an urgently need for achieving the preset government energy saving goal. With its advantage of highly sanitary, highly comfortable and uniform of temperature field, the hot-water resource floor radiation heating system has been widely accepted. This paper has put forward a new way in air-conditioning, which combines the fresh-air supply unit and such floor radiation system for the dehumidification and cooling in summer or heating in winter. By analyze its advantages and limitations, we found that this so called Cooling/ Heating Floor AC System can improve the IAQ of residential building while keep high efficiency quality. We also recommend a methodology for the HVAC system designing, which will ensure the reduction of energy cost of users.

  14. Pelvic Floor Disorders Network

    MedlinePlus

    ... to develop and perform research studies related to women with pelvic floor disorders. In this way, studies can be done more quickly than if the medical centers were working alone. Doctors, nurses, other health care workers, and support staff all play important roles.The ...

  15. Detail view of floor mosaic in first floor lobby ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail view of floor mosaic in first floor lobby - St. Elizabeths Hospital, Hitchcock Hall, 2700 Martin Luther King Jr. Avenue, Southeast, 588-604 Redwood Street, Southeast, Washington, District of Columbia, DC

  16. First floor lobby, showing stairs to ground floor Fitzsimons ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First floor lobby, showing stairs to ground floor - Fitzsimons General Hospital, Main Hospital Building, Charlie Kelly Boulevard, North side, at intersection of Sharon A. Lane Drive, Aurora, Adams County, CO

  17. Stairwell from first floor to ground floor Fitzsimons General ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Stairwell from first floor to ground floor - Fitzsimons General Hospital, Main Hospital Building, Charlie Kelly Boulevard, North side, at intersection of Sharon A. Lane Drive, Aurora, Adams County, CO

  18. Railing detail, stairs from first floor to ground floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Railing detail, stairs from first floor to ground floor - Fitzsimons General Hospital, Main Hospital Building, Charlie Kelly Boulevard, North side, at intersection of Sharon A. Lane Drive, Aurora, Adams County, CO

  19. Two and Three Bedroom Units: First Floor Plan, Second Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Two and Three Bedroom Units: First Floor Plan, Second Floor Plan, South Elevation (As Built), North Elevation (As Built), East Elevation (As Built), East Elevation (Existing), North Elevation (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

  20. 16. SANDSORTING BUILDING, FIRST FLOOR, MEZZANINE ON LEFT (BELOW FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. SAND-SORTING BUILDING, FIRST FLOOR, MEZZANINE ON LEFT (BELOW FLOOR ARE CONCRETE AND STORAGE BINS), LOOKING NORTH - Mill "C" Complex, Sand-Sorting Building, South of Dee Bennet Road, near Illinois River, Ottawa, La Salle County, IL

  1. STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; SOUTH ELEVATION; EAST ELEVATION; NORTH ELEVATION; WEST ELEVATION. - Stirling's Quarters, 555 Yellow Springs Road, Tredyffrin Township, Valley Forge, Chester County, PA

  2. EDITORIAL: Proceedings of the 11th Gravitational Wave Data Analysis Workshop, Potsdam, Germany, 18 21 December 2006

    NASA Astrophysics Data System (ADS)

    Krishnan, B.; Papa, M. A.; Schutz, B. F.

    2007-10-01

    The 11th Gravitational Wave Data Analysis Workshop (GWDAW11) comes in the middle of the fifth science run (S5) of the LIGO detectors, after a full year of data-taking at design sensitivity. LIGO is starting to probe astrophysically plausible scenarios for the emission of detectable gravitational wave signals. In the absence of a detection, the upper limits on the strength of gravitational waves are beginning to add information to what was previously known from electromagnetic observations. One of the highlights of this workshop was the presentation by the LIGO Scientific Collaboration of a search for continuous waves from the Crab pulsar. Gravitational wave emission is constrained by the measured spindown measurements for the object: no more energy can go into gravitational waves than that which is lost by pulsar spindown. For most known pulsars this spindown upper limit on the strength of gravitational radiation is orders of magnitude higher than the upper limits that can be set with current gravitational wave observations. However for the Crab pulsar the gravitational wave observations which coherently combine about 9 months of data from the network of S5 LIGO detectors constrain the gravitational wave emission more strongly than the electromagnetic observations do. The gravitational wave upper limit also constrains the tri-axial ellipticity that this young pulsar could have supported since its crust solidified a thousand years ago. The Virgo detector is in the final stages of commissioning with several engineering runs completed. The TAMA detector's low frequency performance is being enhanced and another data run is foreseen by the end of 2007. The IGEC2 Collaboration presents results from the analysis of 131 days of data in coincidence among the three bar detectors EXPLORER, AURIGA and NAUTILUS. Studies are underway to analyze data in coincidence among bar and interferometer networks. Space-based detectors are receiving more attention, with the LISA Pathfinder

  3. CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) AND KEEPERS OF THE CAST HOUSE FLOOR, S.L. KIMBROUGH AND DAVID HOLMES. - U.S. Steel, Fairfield Works, Blast Furnace No. 8, North of Valley Road, West of Ensley-Pleasant Grove Road, Fairfield, Jefferson County, AL

  4. 49. TOP FLOOR OF 1852 WING LOOKING EAST. FLOOR COVERING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. TOP FLOOR OF 1852 WING LOOKING EAST. FLOOR COVERING INDICATES ANGLE OF INTERSECTION BETWEEN THIS AND THE EARLIER WING. NOTE ALSO CHANGE IN ORIENTATION OF COLUMNS AND HANGING LIGHT FIXTURE. BRIGHT AREA AT CEILING IN MIDDLE DISTANCE INDICATES SKYLIGHT. THIS FLOOR ADDED CA. 1880. - Boston Manufacturing Company, 144-190 Moody Street, Waltham, Middlesex County, MA

  5. Interior, view of third floor room, with original flooring, camera ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior, view of third floor room, with original flooring, camera facing northwest, this was typical of the rooms on the third floor before the rehabilitation by the Navy in the 1950s and 1960s - Naval Training Station, Senior Officers' Quarters District, Quarters No. 4, Naval Station Treasure Island, 4 Whiting Way, Yerba Buena Island, San Francisco, San Francisco County, CA

  6. Chronic pelvic floor dysfunction.

    PubMed

    Hartmann, Dee; Sarton, Julie

    2014-10-01

    The successful treatment of women with vestibulodynia and its associated chronic pelvic floor dysfunctions requires interventions that address a broad field of possible pain contributors. Pelvic floor muscle hypertonicity was implicated in the mid-1990s as a trigger of major chronic vulvar pain. Painful bladder syndrome, irritable bowel syndrome, fibromyalgia, and temporomandibular jaw disorder are known common comorbidities that can cause a host of associated muscular, visceral, bony, and fascial dysfunctions. It appears that normalizing all of those disorders plays a pivotal role in reducing complaints of chronic vulvar pain and sexual dysfunction. Though the studies have yet to prove a specific protocol, physical therapists trained in pelvic dysfunction are reporting success with restoring tissue normalcy and reducing vulvar and sexual pain. A review of pelvic anatomy and common findings are presented along with suggested physical therapy management. PMID:25108498

  7. 15. Detail of window area, showing WoodSpenceBrown 1901 lathe, second ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Detail of window area, showing Wood-Spence-Brown 1901 lathe, second floor looking south. - General Dynamics Corporation Shipyard, Joiner & Sheet Metal Shops, 97 East Howard Street, Quincy, Norfolk County, MA

  8. Modular Flooring System

    NASA Technical Reports Server (NTRS)

    Thate, Robert

    2012-01-01

    The modular flooring system (MFS) was developed to provide a portable, modular, durable carpeting solution for NASA fs Robotics Alliance Project fs (RAP) outreach efforts. It was also designed to improve and replace a modular flooring system that was too heavy for safe use and transportation. The MFS was developed for use as the flooring for various robotics competitions that RAP utilizes to meet its mission goals. One of these competitions, the FIRST Robotics Competition (FRC), currently uses two massive rolls of broadloom carpet for the foundation of the arena in which the robots are contained during the competition. The area of the arena is approximately 30 by 72 ft (approximately 9 by 22 m). This carpet is very cumbersome and requires large-capacity vehicles, and handling equipment and personnel to transport and deploy. The broadloom carpet sustains severe abuse from the robots during a regular three-day competition, and as a result, the carpet is not used again for competition. Similarly, broadloom carpets used for trade shows at convention centers around the world are typically discarded after only one use. This innovation provides a green solution to this wasteful practice. Each of the flooring modules in the previous system weighed 44 lb (.20 kg). The improvements in the overall design of the system reduce the weight of each module by approximately 22 lb (.10 kg) (50 %), and utilize an improved "module-to-module" connection method that is superior to the previous system. The MFS comprises 4-by-4-ft (.1.2-by- 1.2-m) carpet module assemblies that utilize commercially available carpet tiles that are bonded to a lightweight substrate. The substrate surface opposite from the carpeted surface has a module-to-module connecting interface that allows for the modules to be connected, one to the other, as the modules are constructed. This connection is hidden underneath the modules, creating a smooth, co-planar flooring surface. The modules are stacked and strapped

  9. A Study of Grade Level and Gender Differences in Divergent Thinking among 8th and 11th Graders in a Mid-Western School District

    NASA Astrophysics Data System (ADS)

    Roue, Leah Christine

    This research study compared gender and grade level differences in divergent thinking among middle school and high school students in the Midwest, in an attempt to determine whether gender or grade level-based differences exist in divergent thinking. The instrument used was based on the Wallach and Kogan Creativity Test (WKCT). There were 166 public school students in the study from the 8th and 11th grades. The results were analyzed in an effort to answer two research questions: Are there gender differences in fluency, flexibility, or originality of a response? Are there grade level (age) differences in fluency, flexibility, or originality of a response? Quantitative and qualitative reporting is used.

  10. 9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR 2; OPENING IN THE FLOOR IS TO ALLOW THE RUNNER STONES TO BE FLIPPED OVER FOR SHARPENING; AT THE FIRST FLOOR ARE THE POSTS SUPPORTING THE BRIDGEBEAMS ON WHICH THE BRIDGE TREES PIVOT; THE CENTER POST RISES ABOVE THE STONES TO RECEIVE THE FOOT BEARING OF THE UPRIGHT SHAFT; ALSO SEEN ARE THE STONE SPINDLWS, UNDER SIDES OF THE BED STONES, STONE NUT AND GREAT SPUR WHEEL. - Pantigo Windmill, James Lane, East Hampton, Suffolk County, NY

  11. [Pelvic floor muscle training and pelvic floor disorders in women].

    PubMed

    Thubert, T; Bakker, E; Fritel, X

    2015-05-01

    Our goal is to provide an update on the results of pelvic floor rehabilitation in the treatment of urinary incontinence and genital prolapse symptoms. Pelvic floor muscle training allows a reduction of urinary incontinence symptoms. Pelvic floor muscle contractions supervised by a healthcare professional allow cure in half cases of stress urinary incontinence. Viewing this contraction through biofeedback improves outcomes, but this effect could also be due by a more intensive and prolonged program with the physiotherapist. The place of electrostimulation remains unclear. The results obtained with vaginal cones are similar to pelvic floor muscle training with or without biofeedback or electrostimulation. It is not known whether pelvic floor muscle training has an effect after one year. In case of stress urinary incontinence, supervised pelvic floor muscle training avoids surgery in half of the cases at 1-year follow-up. Pelvic floor muscle training is the first-line treatment of post-partum urinary incontinence. Its preventive effect is uncertain. Pelvic floor muscle training may reduce the symptoms associated with genital prolapse. In conclusion, pelvic floor rehabilitation supervised by a physiotherapist is an effective short-term treatment to reduce the symptoms of urinary incontinence or pelvic organ prolapse. PMID:25921509

  12. Floor of Juventae Chasma

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 30 May 2002) Juventae Chasma is an enormous box canyon (250 km X 100 km) which opens to the north and forms the outflow channel Maja Vallis. Most Martian outflow channels such as Maja, Kasei, and Ares Valles begin at point sources such as box canyons and chaotic terrain and then flow unconfined into a basin region. This image captures a portion of the western floor of Juventae Chasma and shows a wide variety of landforms. Conical hills, mesas, buttes and plateaus of layered material dominate this scene and seem to be 'swimming' in vast sand sheets. The conical hills have a spur and gully topography associated with them while the flat topped buttes and mesas do not. This may be indicative of different materials that compose each of these landforms or it could be that the flat-topped layer has been completely eroded off of the conical hills thereby exposing a different rock type. Both the conical hills and flat-topped buttes and mesas have extensive scree slopes (heaps of eroded rock and debris). Ripples, which are inferred to be dunes, can also be seen amongst the hills. No impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded.

  13. 27. THIRD FLOOR MAIN HALL FROM SIDE HALL LEADING TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. THIRD FLOOR MAIN HALL FROM SIDE HALL LEADING TO SERVICE STAIRS This hall is lit by three natural sources, the lightwell window of the main stairs visible in the distance, the skylight in the linen closet at the extreme left, and from the glazed openings in the interior and exterior doors of the nurse's room, out of sight to the right. - Woodrow Wilson House, 2340 South S Street, Northwest, Washington, District of Columbia, DC

  14. 18. Interior detail, windows, original Library, addition, Engine Stores Building, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Interior detail, windows, original Library, addition, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to north-northwest (90mm lens). Note the milled tongue-and-groove ceiling, and deterioration of bricks near floor level due to rising damp. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

  15. 31. Interior detail view of arched, steelframed, stained glass windows ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    31. Interior detail view of arched, steel-framed, stained glass windows at the landing of the south stairs in main lobby, view looking south from second floor lobby - University of Oregon Museum of Art, 1470 Johnson Lane, Eugene, Lane County, OR

  16. 26. Interior view of unoccupied office space, showing exterior windows, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Interior view of unoccupied office space, showing exterior windows, closed closet, and open doorway to other office; southwest corner of main section of building on main floor; View to southwest. - Ellsworth Air Force Base, Group Administration & Secure Storage Building, 2372 Westover Avenue, Blackhawk, Meade County, SD

  17. 4. STAIR, FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHEAST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. STAIR, FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHEAST. Plan of stair is elliptical, the inside well measuring 54' on major axis and 14' on minor axis. ALSO NOTE HIGH REEDED WAINSCOT - Saltus-Habersham House, 802 Bay Street, Beaufort, Beaufort County, SC

  18. 18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH BLOCKS AND PULLEYS OVERHEAD LOOKING NORTHEAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  19. 13. Bottom floor, tower interior showing concrete floor and cast ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Bottom floor, tower interior showing concrete floor and cast iron bases for oil butts (oil butts removed when lighthouse lamp was converted to electric power.) - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  20. Floor Plans: Section "AA", Section "BB"; Floor Framing Plans: Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans: Section "A-A", Section "B-B"; Floor Framing Plans: Section "A-A", Section "B-B" - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  1. 18. MAIN FLOOR HOLDING TANKS Main floor, looking at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. MAIN FLOOR - HOLDING TANKS Main floor, looking at holding tanks against the west wall, from which sluice gates are seen protruding. Right foreground-wooden holding tanks. Note narrow wooden flumes through which fish were sluiced into holding and brining tanks. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  2. Floor-plan radar

    NASA Astrophysics Data System (ADS)

    Falconer, David G.; Ueberschaer, Ronald M.

    2000-07-01

    Urban-warfare specialists, law-enforcement officers, counter-drug agents, and counter-terrorism experts encounter operational situations where they must assault a target building and capture or rescue its occupants. To minimize potential casualties, the assault team needs a picture of the building's interior and a copy of its floor plan. With this need in mind, we constructed a scale model of a single- story house and imaged its interior using synthetic-aperture techniques. The interior and exterior walls nearest the radar set were imaged with good fidelity, but the distal ones appear poorly defined and surrounded by ghosts and artifacts. The latter defects are traceable to beam attenuation, wavefront distortion, multiple scattering, traveling waves, resonance phenomena, and other effects not accounted for in the traditional (noninteracting, isotropic point scatterer) model for radar imaging.

  3. Langerhans cell histiocytosis or tuberculosis on a medieval child (Oppidum de la Granède, Millau, France - 10th-11th centuries AD).

    PubMed

    Colombo, Antony; Saint-Pierre, Christophe; Naji, Stephan; Panuel, Michel; Coqueugniot, Hélène; Dutour, Olivier

    2015-06-01

    In 2008, a skeleton of a 1 - 2.5-year-old child radiocarbon dated from the 10th - 11th century AD was discovered on the oppidum of La Granède (Millau, France). It presents multiple cranial osteolytic lesions having punched-out or geographical map-like aspects associated with sequestrum and costal osteitis. A multi 3D digital approach (CT, μCT and virtual reconstruction) enabled us to refine the description and identify the diploic origin of the lytic process. Furthermore, precise observation of the extent of the lesions and associated reorganization of the skeletal micro-structure were possible. From these convergent pieces of evidence, the differential diagnosis led to three possibilities: Langerhans cell histiocytosis, tuberculosis, or Langerhans cell histiocytosis and tuberculosis. PMID:25747815

  4. Waterproof Raised Floor Makes Utility Lines Accessible

    NASA Technical Reports Server (NTRS)

    Cohen, M. M.

    1984-01-01

    Floor for laboratories, hospitals and factories waterproof yet allows access to subfloor utilities. Elevated access floor system designed for installations with multitude of diverse utility systems routed under and up through floor and requirement of separation of potentially conflicting utility services. Floor covered by continuous sheet of heat resealable vinyl. Floor system cut open when changes are made in utility lines and ducts. After modifications, floor covering resealed to protect subfloor utilities from spills and leaks.

  5. Making A Precisely Level Floor

    NASA Technical Reports Server (NTRS)

    Simpson, William G.; Walker, William H.; Cather, Jim; Burch, John B.; Clark, Keith M.; Johnston, Dwight; Henderson, David E.

    1989-01-01

    Floor-pouring procedure yields large surface level, smooth, and hard. Floor made of self-leveling, slow-curing epoxy with added black pigment. Epoxy poured to thickness no greater than 0.33 in. (0.84 cm) on concrete base. Base floor seasoned, reasonably smooth and level, and at least 4 in. (10cm) thick. Base rests on thermal barrier of gravel or cinders and contains no steel plates, dividers, or bridges to minimize thermal distortion. Metal retaining wall surrounds base.

  6. Low floor mass transit vehicle

    DOEpatents

    Emmons, J. Bruce; Blessing, Leonard J.

    2004-02-03

    A mass transit vehicle includes a frame structure that provides an efficient and economical approach to providing a low floor bus. The inventive frame includes a stiff roof panel and a stiff floor panel. A plurality of generally vertical pillars extend between the roof and floor panels. A unique bracket arrangement is disclosed for connecting the pillars to the panels. Side panels are secured to the pillars and carry the shear stresses on the frame. A unique seating assembly that can be advantageously incorporated into the vehicle taking advantage of the load distributing features of the inventive frame is also disclosed.

  7. 21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR WAS USED FOR DEPLETED AND ENRICHED URANIUM FABRICATION. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  8. 23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR HOUSED ADMINISTRATIVE OFFICES, THE CENTRAL COMPUTING, UTILITY SYSTEMS, ANALYTICAL LABORATORIES, AND MAINTENANCE SHOPS. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  9. 22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR CONTAINS THE AIR PLENUM ND SOME OFFICE SPACE. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  10. Efficient Windows Collaborative

    SciTech Connect

    Nils Petermann

    2010-02-28

    The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

  11. Air transparent soundproof window

    SciTech Connect

    Kim, Sang-Hoon; Lee, Seong-Hyun

    2014-11-15

    A soundproof window or wall which is transparent to airflow is presented. The design is based on two wave theories: the theory of diffraction and the theory of acoustic metamaterials. It consists of a three-dimensional array of strong diffraction-type resonators with many holes centered on each individual resonator. The negative effective bulk modulus of the resonators produces evanescent wave, and at the same time the air holes with subwavelength diameter existed on the surfaces of the window for macroscopic air ventilation. The acoustic performance levels of two soundproof windows with air holes of 20mm and 50mm diameters were measured. The sound level was reduced by about 30 - 35dB in the frequency range of 400 - 5,000Hz with the 20mm window, and by about 20 - 35dB in the frequency range of 700 - 2,200Hz with the 50mm window. Multi stop-band was created by the multi-layers of the window. The attenuation length or the thickness of the window was limited by background noise. The effectiveness of the soundproof window with airflow was demonstrated by a real installation.

  12. Color Wheel Windows

    ERIC Educational Resources Information Center

    Leonard, Stephanie

    2012-01-01

    In this article, the author describes a painting and drawing lesson which was inspired by the beautiful circular windows found in cathedrals and churches (also known as "rose windows"). This two-week lesson would reinforce both the concept of symmetry and students' understanding of the color wheel. (Contains 1 online resource.)

  13. Pelvic floor muscle training exercises

    MedlinePlus

    ... nlm.nih.gov/pubmed/22258946 . Dumoulin C, Hay-Smith J. Pelvic floor muscle training versus no treatment, ... nlm.nih.gov/pubmed/20091581 . Herderschee R, Hay-Smith EJC, Herbison GP, Roovers JP, Heineman MJ. Feedback ...

  14. Multi-functional windows

    NASA Astrophysics Data System (ADS)

    Nag, Nagendra; Goldman, Lee M.; Balasubramanian, Sreeram; Sastri, Suri

    2013-06-01

    The requirements for modern aircraft are driving the need for conformal windows for future sensor systems. However, limitations on optical systems and the physical properties of optically transparent materials currently limit the geometry of existing windows and window assemblies to faceted assemblies of flat windows held in weight bearing frames. Novel material systems will have to be developed which combine different materials (e.g. ductile metals with transparent ceramics) into structures that combine transparency with structural integrity. Surmet's demonstrated ability to produce novel transparent ceramic/metal structures will allow us to produce such structures in the types of conformal shapes required for future aircraft applications. Furthermore, the ability to incorporate transparencies into such structures also holds out the promise of creating multi-functional windows which provide a broad range of capabilities that might include RF antennas and de-icing in addition to transparency. Recent results in this area will be presented.

  15. Windows technology assessment

    SciTech Connect

    Baron, J.J.

    1995-10-01

    This assessment estimates that energy loss through windows is approximately 15 percent of all the energy used for space heating and cooling in residential and commercial buildings in New York State. The rule of thumb for the nation as a whole is about 25 percent. The difference may reflect a traditional assumption of single-pane windows while this assessment analyzed installed window types in the region. Based on the often-quoted assumption, in the United States some 3.5 quadrillion British thermal units (Btu) of primary energy, costing some $20 billion, is annually consumed as a result of energy lost through windows. According to this assessment, in New York State, the energy lost due to heat loss through windows is approximately 80 trillion Btu at an annual cost of approximately $1 billion.

  16. Zero Energy Windows

    SciTech Connect

    Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

    2006-05-17

    Windows in the U.S. consume 30 percent of building heating and cooling energy, representing an annual impact of 4.1 quadrillion BTU (quads) of primary energy. Windows have an even larger impact on peak energy demand and on occupant comfort. An additional 1 quad of lighting energy could be saved if buildings employed effective daylighting strategies. The ENERGY STAR{reg_sign} program has made standard windows significantly more efficient. However, even if all windows in the stock were replaced with today's efficient products, window energy consumption would still be approximately 2 quads. However, windows can be ''net energy gainers'' or ''zero-energy'' products. Highly insulating products in heating applications can admit more useful solar gain than the conductive energy lost through them. Dynamic glazings can modulate solar gains to minimize cooling energy needs and, in commercial buildings, allow daylighting to offset lighting requirements. The needed solutions vary with building type and climate. Developing this next generation of zero-energy windows will provide products for both existing buildings undergoing window replacements and products which are expected to be contributors to zero-energy buildings. This paper defines the requirements for zero-energy windows. The technical potentials in terms of national energy savings and the research and development (R&D) status of the following technologies are presented: (1) Highly insulating systems with U-factors of 0.1 Btu/hr-ft{sup 2}-F; (2) Dynamic windows: glazings that modulate transmittance (i.e., change from clear to tinted and/or reflective) in response to climate conditions; and (3) Integrated facades for commercial buildings to control/ redirect daylight. Market transformation policies to promote these technologies as they emerge into the marketplace are then described.

  17. Channel Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    [figure removed for brevity, see original site]

    Released 19 July 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth.

    Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms.

    The yardangs in this image are forming in channel floor deposits. The channel itself is funneling the wind to cause the erosion.

    Image information: VIS instrument. Latitude 4.5, Longitude 229.7 East (133.3 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are

  18. Selecting windows for energy efficiency

    SciTech Connect

    1997-05-01

    New window technologies have increased energy benefits and comfort, and have provided more practical options for consumers. This selection guide will help homeowners, architects, and builders take advantage of the expanding window market. The guide contains three sections: an explanation of energy-related window characteristics, a discussion of window energy performance ratings, and a convenient checklist for window selection.

  19. GA microwave window development

    SciTech Connect

    Moeller, C.P.; Kasugai, A.; Sakamoto, K.; Takahashi, K.

    1994-10-01

    The GA prototype distributed window was tested in a 32 mm diam. waveguide system at a power density suitable for a MW gyrotron, using the JAERI/Toshiba 110 GHz long pulse internal converter gyrotron in the JAERI test stand. The presence of the untilted distributed window had no adverse effect on the gyrotron operation. A pulse length of 10 times the calculated thermal equilibrium time (1/e time) of 30 msec was reached, and the window passed at least 750 pulses greater than 30 msec and 343 pulses greater than 60 msec. Beyond 100 msec, the window calorimetry reached steady state, allowing the window dissipation to be measured in a single pulse. The measured loss of 4.0% agrees both with the estimated loss, on which the stress calculations are based, and with the attenuation measured at low power in the HE{sub 11} mode. After the end of the tests, the window was examined; no evidence of arcing air coating was found in the part of the window directly illuminated by the microwaves, although there was discoloration in a recess containing an optical diagnostic which outgassed, causing a local discharge to occur in that recess. Finally, there was no failure of the metal-sapphire joints during a total operating time of 50 seconds consisting of pulses longer than 30 msec.

  20. Tangential Floor in a Classroom Setting

    ERIC Educational Resources Information Center

    Marti, Leyla

    2012-01-01

    This article examines floor management in two classroom sessions: a task-oriented computer lesson and a literature lesson. Recordings made in the computer lesson show the organization of floor when a task is given to students. Temporary or "incipient" side floors (Jones and Thornborrow, 2004) emerge beside the main floor. In the literature lesson,…

  1. Enhanced capture of healthcare-related harms and injuries in the 11th revision of the International Classification of Diseases (ICD-11).

    PubMed

    Southern, Danielle A; Pincus, Harold A; Romano, Patrick S; Burnand, Bernard; Harrison, James; Forster, Alan J; Moskal, Lori; Quan, Hude; Droesler, Saskia E; Sundararajan, Vijaya; Colin, Cyrille; Gurevich, Yana; Brien, Susan E; Kostanjsek, Nenad; Üstün, Bedirhan; Ghali, William A

    2016-02-01

    The World Health Organization (WHO) plans to submit the 11th revision of the International Classification of Diseases (ICD) to the World Health Assembly in 2018. The WHO is working toward a revised classification system that has an enhanced ability to capture health concepts in a manner that reflects current scientific evidence and that is compatible with contemporary information systems. In this paper, we present recommendations made to the WHO by the ICD revision's Quality and Safety Topic Advisory Group (Q&S TAG) for a new conceptual approach to capturing healthcare-related harms and injuries in ICD-coded data. The Q&S TAG has grouped causes of healthcare-related harm and injuries into four categories that relate to the source of the event: (a) medications and substances, (b) procedures, (c) devices and (d) other aspects of care. Under the proposed multiple coding approach, one of these sources of harm must be coded as part of a cluster of three codes to depict, respectively, a healthcare activity as a 'source' of harm, a 'mode or mechanism' of harm and a consequence of the event summarized by these codes (i.e. injury or harm). Use of this framework depends on the implementation of a new and potentially powerful code-clustering mechanism in ICD-11. This new framework for coding healthcare-related harm has great potential to improve the clinical detail of adverse event descriptions, and the overall quality of coded health data. PMID:26660444

  2. Possible impacts of early-11th-, middle-12th-, and late-13th-century droughts on western Native Americans and the Mississippian Cahokians

    USGS Publications Warehouse

    Benson, L.V.; Berry, M.S.; Jolie, E.A.; Spangler, J.D.; Stahle, D.W.; Hattori, E.M.

    2007-01-01

    One or more of three intense and persistent droughts impacted some Native American cultures in the early-11th, middle-12th and late-13th centuries, including the Anasazi, Fremont, Lovelock, and Mississippian (Cahokian) prehistorical cultures. Tree-ring-based reconstructions of precipitation and temperature indicate that warm drought periods occurred between AD 990 and 1060, AD 1135 and 1170, and AD 1276 and 1297. These droughts occurred during minima in the Pacific Decadal Oscillation and may have been associated with positive values of the Atlantic Multidecadal Oscillation. Each of the Native American cultures was supported, to a greater or lesser degree, by precipitation-dependent resources. Both the Four Corners region and Cahokia were sites of intense growth between about AD 1050 and 1130, and by AD 1150, cultures in both regions were undergoing stress. By AD 1300 the Anasazi and Fremont cultures had collapsed and their residual populations had either left their homelands or withered. In the case of Fremont populations, the AD 990-1060 drought may have had the greatest impact. This drought also may have affected the Anasazi, for it was at the end of this drought that some people from Chaco migrated to the San Juan River valley and founded the Salmon Ruin great house. Detailed data do not exist on the number of Lovelock habitation sites or populations over time; however, Lovelock populations appear to have retreated from the western Great Basin to California by AD 1300 or shortly thereafter.

  3. Possible impacts of early-11th-, middle-12th-, and late-13th-century droughts on western Native Americans and the Mississippian Cahokians

    NASA Astrophysics Data System (ADS)

    Benson, Larry V.; Berry, Michael S.; Jolie, Edward A.; Spangler, Jerry D.; Stahle, David W.; Hattori, Eugene M.

    2007-02-01

    One or more of three intense and persistent droughts impacted some Native American cultures in the early-11th, middle-12th and late-13th centuries, including the Anasazi, Fremont, Lovelock, and Mississippian (Cahokian) prehistorical cultures. Tree-ring-based reconstructions of precipitation and temperature indicate that warm drought periods occurred between AD 990 and 1060, AD 1135 and 1170, and AD 1276 and 1297. These droughts occurred during minima in the Pacific Decadal Oscillation and may have been associated with positive values of the Atlantic Multidecadal Oscillation. Each of the Native American cultures was supported, to a greater or lesser degree, by precipitation-dependent resources. Both the Four Corners region and Cahokia were sites of intense growth between about AD 1050 and 1130, and by AD 1150, cultures in both regions were undergoing stress. By AD 1300 the Anasazi and Fremont cultures had collapsed and their residual populations had either left their homelands or withered. In the case of Fremont populations, the AD 990-1060 drought may have had the greatest impact. This drought also may have affected the Anasazi, for it was at the end of this drought that some people from Chaco migrated to the San Juan River valley and founded the Salmon Ruin great house. Detailed data do not exist on the number of Lovelock habitation sites or populations over time; however, Lovelock populations appear to have retreated from the western Great Basin to California by AD 1300 or shortly thereafter.

  4. The Efficient Windows Collaborative

    SciTech Connect

    Petermann, Nils

    2006-03-31

    The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

  5. double hung window details, hall window details, entrance door profiles ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    double hung window details, hall window details, entrance door profiles - Chopawamsic Recreational Demonstration Area - Cabin Camp 1, Help's Quarters, Prince William Forest Park, Triangle, Prince William County, VA

  6. Exterior building details of Building C, south façade: second floor" ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior building details of Building C, south façade: second floor" four-over-four windows, arch brick lintels, brick sills, decorative metal grilles and tiebacks; northwesterly view - San Quentin State Prison, Building 22, Point San Quentin, San Quentin, Marin County, CA

  7. Exterior building details of Building C, west façade: second floor: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior building details of Building C, west façade: second floor: four-over-four windows, arch brick lintels, brick sills, decorative metal grilles; easterly view - San Quentin State Prison, Building 22, Point San Quentin, San Quentin, Marin County, CA

  8. 33. SECOND FLOOR WEST SIDE APARTMENT KITCHEN INTERIOR. 6LIGHT PANEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. SECOND FLOOR WEST SIDE APARTMENT KITCHEN INTERIOR. 6-LIGHT PANEL DOOR AND 6-LIGHT CASEMENT WINDOW AT PHOTO CENTER AND PHOTO RIGHT RESPECTIVELY OPEN TO EXTERIOR STAIRWAY LANDING. VIEW TO WEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  9. GUARD HOUSE AND BARRACKS; SECOND FLOOR PLAN AND DOOR FRAME ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GUARD HOUSE AND BARRACKS; SECOND FLOOR PLAN AND DOOR FRAME AND WINDOW DETAILS. Navy Department, Bureau of Yards & Docks, Navy Yard, Mar Island, CA. Albert F. Roller, Architect, San Francisco, CA. H.J. Brunnier, Structural Engineer, Sharon Building, San Francisco, CA. Sheet 2 of 15, accompanying specification Noy-4675. Submitted May 8, 1941, last revised July 14, 1941. Yards & Docks drawing no. 160687; P.W. (Public Works) drawing no. 10388-26; file no. 930-CR-4. Scale one eighth inch to one foot (floor plan) and 3 inches to one foot (details). 73 cm x 129 cm. Ink on vellum - Mare Island Naval Shipyard, Guard House & Barracks, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  10. Cordilleran slab windows

    SciTech Connect

    Thorkelson, D.J.; Taylor, R.P. )

    1989-09-01

    The geometry and geologic implications of subducted spreading ridges are topics that have bedeviled earth scientists ever since the recognition of plate tectonics. As a consequence of subduction of the Kula-Farallon and East Pacific rises, slab windows formed and migrated beneath the North American Cordillera. The probable shape and extent of these windows, which represent the asthenosphere-filled gaps between two separating, subducting oceanic plates, are depicted from the Late Cretaceous to the present. Possible effects of the existence and migration of slab windows on the Cordillera at various times include cessation of arc volcanism and replacement by rift or plate-edge volcanism; lithospheric uplift, attenuation, and extension; and increased intensity of compressional tectonism. Eocene extensional tectonism and alkaline magmatism in southern British Columbia and the northwestern United States were facilitated by slab-window development.

  11. Superconducting radiofrequency window assembly

    DOEpatents

    Phillips, H.L.; Elliott, T.S.

    1997-03-11

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly has a superconducting metal-ceramic design. The srf window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  12. Superconductive radiofrequency window assembly

    DOEpatents

    Phillips, H.L.; Elliott, T.S.

    1998-05-19

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The SRF window assembly has a superconducting metal-ceramic design. The SRF window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the SRF window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

  13. Energy-efficient windows

    SciTech Connect

    1994-10-01

    This fact sheet describes energy efficient windows for the reduction of home heating and cooling energy consumption. It discusses controlling air leaks by caulking and weatherstripping and by replacing window frames. Reducing heat loss and condensation is discussed by describing the types of glazing materials, the number of glass and air spaces, frame and spacer materials, and the use of movable insulation (shutters, drapes, etc.). A resource list is provided for further information.

  14. The deep oval window.

    PubMed

    Kapur, T R

    1991-09-01

    This article presents the results of an analysis of the variable and surgically important relationship between the oval window, the fossular walls and the related posterior tympanic recesses in 50 temporal bones. The visual impressions of superficial and deep oval windows seem to correspond fairly closely to the depth of the inferior wall of the fossula fenestra vestibuli (FFV). The depth of the superior and anterior walls of the FFV by themselves, did not appear to have such a dominating relationship in determining the deep oval window. There does not appear to be a well defined posterior wall in the vast majority of the specimens (86 per cent). In the event of scar tissue forming between the superior, inferior and anterior walls, the gap between the postero-superior part of the promontory and the posterior tympanic wall (posterior communication) could allow aeration of the region of the deep oval window in such an instance. Closure of this gap by a solid shelf of ponticulus or scar tissue could cause a localized malaeration of the fossula in most cases of deep oval windows. This is an entirely new concept of the likely problems of malaeration of a deep oval window which could arise due to anatomical variations and of the possible safety valve mechanism which could prevent such malaeration and its consequences. PMID:1919338

  15. High Performance Window Retrofit

    SciTech Connect

    Shrestha, Som S; Hun, Diana E; Desjarlais, Andre Omer

    2013-12-01

    The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

  16. Homestead and Gardening Skills. A Guide for Providing Instruction for 11th and 12th Grade Students Enrolled in North Carolina's Secondary Schools [and] Vocational Education Competency Test-Item Bank. Agricultural Education.

    ERIC Educational Resources Information Center

    Robinson, Ward R.

    This document consists of a teacher's guide for a competency-based course on homestead and gardening skills designed for North Carolina's 11th- and 12th-grade students, and a list of competency test items applicable to the course. The teacher's guide contains course specifications, a list of competency statements, a sheet describing each unit of…

  17. Proceedings of the Annual Meeting of the North American Chapter of the International Group for the Psychology of Mathematics Education (11th, New Brunswick, New Jersey, September 20-23, 1989), Volume 2: Plenary Lectures and Symposia.

    ERIC Educational Resources Information Center

    Maher, Carolyn A., Ed.; Goldin, Gerald A., Ed.; Davis, Robert B., Ed.

    This document reports on the 11th annual conference of the North American Chapter of the International Group for the Psychology of Mathematics Education (PME-NA). Plenary and response lectures and speakers include: "The Description and Analysis of Mathematical Processes" (Nicolas Herscovics); "To Know Mathematics is to Go Beyond Thinking That…

  18. Building on Family Strengths: Research and Services in Support of Children and Their Families. Proceedings of the Building on Family Strengths Annual Conference (11th, Portland, Oregon, May 6-8, 2004)

    ERIC Educational Resources Information Center

    Gordon, Lynwood J., Ed.; Tullis, Kathryn, Ed.; Hanson, Andrea, Ed.; Sowders, Stacey, Ed.

    2005-01-01

    The 11th Annual Building on Family Strengths Conference was held from May 6th through May 8th, 2004, in Portland, Oregon. Highlights included: (1) The revival of a pre-conference training session; this year featured "Understanding Research and Evaluation in Relation to Social Change," presented by Elaine Slaton and Shannon CrossBear of the…

  19. 9. Detail view of columns on first floor. This row ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Detail view of columns on first floor. This row of columns indicates the former location of the exterior mill wall before World War II era expansion. The unusual column and beam connection was a key part of the mill structural system patented by Providence, Rhode Island engineers Charles Praray and Charles Makepeace in 1894. Each column was originally located in the apex of triangular window bay, but not connected to the exterior wall. Modifications on the right side of each column support the beams of the addition. - Dixie Cotton Mill, 710 Greenville Street, La Grange, Troup County, GA

  20. 19. VIEW TOWARD THE SOUTHEAST AT SECOND FLOOR, ROOM 201. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. VIEW TOWARD THE SOUTHEAST AT SECOND FLOOR, ROOM 201. EXPOSED BEAMS ARE BOXED IN PLYWOOD AND PLYWOOD PANEL WAINSCOTING IS USED ON WALLS. 3X3 LITE CLERESTORY WINDOWS LINE UPPER THIRD OF THE NORTHEAST AND SOUTHWEST WALLS; DOOR OPENINGS ARE SPACED ALONG THE LOWER TWO-THIRDS. LATER ADDITIONS INCLUDE A RAISED PLYWOOD PLATFORM LOCATED AT THE NORTHEAST WALL, GYPSUM BOARD CEILING AND FLUORESCENT LIGHTING. - Presidio of San Francisco, Cavalry Stables, Cowles Street, between Lincoln Boulevard & McDowell Street, San Francisco, San Francisco County, CA

  1. Window replacement and residential lead paint hazard control 12 years later.

    PubMed

    Dixon, Sherry L; Jacobs, David E; Wilson, Jonathan W; Akoto, Judith Y; Nevin, Rick; Scott Clark, C

    2012-02-01

    Window replacement is a key method of reducing childhood lead exposure, but the long-term effectiveness has not been previously evaluated. Windows have the highest levels of interior lead paint and dust compared to other building components. Our objective was to conduct a follow-up study of residential window replacement and lead hazard control 12 years after homes were enrolled in an evaluation of the HUD Lead Hazard Control Grant Program, sampling settled lead dust in housing in four cities (n=189 homes). Previous work evaluated lead hazard controls up to 6 years after intervention using dust lead measurements and two years after intervention using both dust and blood lead data. But the earlier work could not examine the effect of window replacement over the longer time period examined here: 12 years. The individual homes were assigned to one of three categories, based on how many windows had been replaced: all replacement, some replacement, or non-replacement. Windows that were not replaced were repaired. We controlled for covariates such as site, housing condition, presence of lead paint, and season using longitudinal regression modeling. Adjusted floor and sill dust lead geometric mean dust lead loadings declined at least 85% from pre-intervention to 12 years after the intervention for homes with all replacement windows, some windows replaced and no windows replaced. Twelve years after intervention, homes with all replacement windows had 41% lower interior floor dust lead, compared to non-replacement homes (1.4 versus 2.4 μg/ft2, p<0.001), and window sill dust lead was 51% lower (25 versus 52 μg/ft2, p=0.006) while controlling for covariates. Homes with some windows replaced had interior floor and window sill dust lead loadings that were 28% (1.7 versus 2.4 μg/ft2, p=0.19) and 37% (33 versus 52 μg/ft2, p=0.07) lower, respectively, compared to non-replacement homes. The net economic benefit of window replacement compared to window repair (non

  2. Gravitational waves from a particle in circular orbits around a rotating black hole to the 11th post-Newtonian order

    NASA Astrophysics Data System (ADS)

    Fujita, Ryuichi

    2015-03-01

    We compute the energy flux of the gravitational waves radiated by a particle of mass μ in circular orbits around a rotating black hole of mass M up to the 11th post-Newtonian order (11PN), i.e. v^{22} beyond the leading Newtonian approximation where v is the orbital velocity of the particle [L. Blanchet, Living Rev. Relativity 5, 3 (2002)]. By comparing the PN results for the energy flux with high-precision numerical results in black hole perturbation theory, we find the region of validity in the PN approximation becomes larger with increasing PN order. If one requires the relative error of the energy flux in the PN approximation to be less than 10^{-5}, the energy flux at 11PN (4PN) can be used for v⪉ 0.33 (v ⪉ 0.13). The region of validity can be further extended to v⪉ 0.4 if one applies a resummation method to the energy flux at 11PN. We then compare the orbital phase during a two-year inspiral from the PN results with the high-precision numerical results. We find that, for late (early) inspirals when q≤ 0.3 (q≤ 0.9), where q is the dimensionless spin parameter of the black hole, the difference in the phase is less than 1 (10^{-4}) rad and hence these inspirals may be detected in the data analysis for space detectors such as eLISA/New Gravitational wave Observatory by the PN templates. We also compute the energy flux radiated into the event horizon for a particle in circular orbits around a non-rotating black hole at 22.5PN, i.e. v^{45} beyond the leading Newtonian approximation, which is comparable to the PN order derived in our previous work for the energy flux to infinity at 22PN.

  3. Proceedings of the 11th International Conference on Magnetic Fluids (ICMF 11) (Košice, Slovakia, 23-27 July 2007).

    PubMed

    Kopčanský, Peter; Timko, Milan; Kováč, Josef; Václavíková, Miroslava; Odenbach, Stefan

    2008-05-21

    The 11th International Conference on Magnetic Fluids (ICMF 11) was held in Košice, Slovakia between 23-27 July 2007. Attendance at the conference was high and its motivation was in line with the ten previous ICMF conferences organized in Udine, Orlando, Bangor, Sendai-Tokyo, Riga, Paris, Bhavnagar, Timisoara, Bremen and Guarujá. The conference in Slovakia reflected the scientific community's enthusiasm and worldwide support, with 256 participants, from 30 countries attending.The main objective of ICMF 11 was to promote progress and knowledge in the field of magnetic fluids regarding their chemistry, physical and magnetic properties, heat and mass transfer, surface phenomena, as well as their technological and biomedical applications. As research on magnetic fluids is essentially interdisciplinary, experts from related areas were invited to present their contributions with a view to increasing knowledge in the field and highlighting new trends. Submitted communications were refereed by members of the Scientific Organizing Committee and abstracts were assembled in a book of abstracts. Participants presented 180 posters in two poster sessions and 56 oral presentations. All presentations contributed to a greater understanding of the area, and helped to bridge the gap between physics, chemistry, technology, biology and medical sciences. Contributions to this conference are presented in 115 scientific papers, with some published in Journal of Physics: Condensed Matter and the rest in Magnetohydrodynamics. The organization of the conference was made possible by generous support from the Institute of Experimental Physics and Institute of Geotechnics of the Slovak Academy of Sciences, the University of Pavol Jozef Šafárik and the Slovak Physical Society. Financial support from Ferrotec, Cryosoft Ltd, Mikrochem, Liquids Research Ltd, Askony and US Steel Košice, is also gratefully acknowledged. PMID:21694229

  4. Preface: Proceedings of the 11th International Conference on Magnetic Fluids (ICMF 11) (Košice, Slovakia, 23 27 July 2007)

    NASA Astrophysics Data System (ADS)

    Kopčanský, Peter; Timko, Milan; Kováč, Josef; Václavíková, Miroslava; Odenbach, Stefan

    2008-05-01

    The 11th International Conference on Magnetic Fluids (ICMF 11) was held in Košice, Slovakia between 23-27 July 2007. Attendance at the conference was high and its motivation was in line with the ten previous ICMF conferences organized in Udine, Orlando, Bangor, Sendai-Tokyo, Riga, Paris, Bhavnagar, Timisoara, Bremen and Guarujá. The conference in Slovakia reflected the scientific community's enthusiasm and worldwide support, with 256 participants, from 30 countries attending.The main objective of ICMF 11 was to promote progress and knowledge in the field of magnetic fluids regarding their chemistry, physical and magnetic properties, heat and mass transfer, surface phenomena, as well as their technological and biomedical applications. As research on magnetic fluids is essentially interdisciplinary, experts from related areas were invited to present their contributions with a view to increasing knowledge in the field and highlighting new trends. Submitted communications were refereed by members of the Scientific Organizing Committee and abstracts were assembled in a book of abstracts. Participants presented 180 posters in two poster sessions and 56 oral presentations. All presentations contributed to a greater understanding of the area, and helped to bridge the gap between physics, chemistry, technology, biology and medical sciences. Contributions to this conference are presented in 115 scientific papers, with some published in Journal of Physics: Condensed Matter and the rest in Magnetohydrodynamics. The organization of the conference was made possible by generous support from the Institute of Experimental Physics and Institute of Geotechnics of the Slovak Academy of Sciences, the University of Pavol Jozef Šafárik and the Slovak Physical Society. Financial support from Ferrotec, Cryosoft Ltd, Mikrochem, Liquids Research Ltd, Askony and US Steel Košice, is also gratefully acknowledged.

  5. Key Elements of and Materials Performance Targets for Highly Insulating Window Frames

    SciTech Connect

    Gustavsen, Arild; Grynning, Steinar; Arasteh, Dariush; Jelle, Bjorn Petter; Goudey, Howdy

    2011-03-28

    The thermal performance of windows is important for energy efficient buildings. Windows typically account for about 30-50 percent of the transmission losses though the building envelope, even if their area fraction of the envelope is far less. The reason for this can be found by comparing the thermal transmittance (U-factor) of windows to the U-factor of their opaque counterparts (wall, roof and floor constructions). In well insulated buildings the U-factor of walls, roofs an floors can be between 0.1-0.2 W/(m2K). The best windows have U-values of about 0.7-1.0. It is therefore obvious that the U-factor of windows needs to be reduced, even though looking at the whole energy balance for windows (i.e. solar gains minus transmission losses) makes the picture more complex.In high performance windows the frame design and material use is of utmost importance, as the frame performance is usually the limiting factor for reducing the total window U-factor further. This paper describes simulation studies analyzing the effects on frame and edge-of-glass U-factors of different surface emissivities as well as frame material and spacer conductivities. The goal of this work is to define materials research targets for window frame components that will result in better frame thermal performance than is exhibited by the best products available on the market today.

  6. High performance sapphire windows

    NASA Technical Reports Server (NTRS)

    Bates, Stephen C.; Liou, Larry

    1993-01-01

    High-quality, wide-aperture optical access is usually required for the advanced laser diagnostics that can now make a wide variety of non-intrusive measurements of combustion processes. Specially processed and mounted sapphire windows are proposed to provide this optical access to extreme environment. Through surface treatments and proper thermal stress design, single crystal sapphire can be a mechanically equivalent replacement for high strength steel. A prototype sapphire window and mounting system have been developed in a successful NASA SBIR Phase 1 project. A large and reliable increase in sapphire design strength (as much as 10x) has been achieved, and the initial specifications necessary for these gains have been defined. Failure testing of small windows has conclusively demonstrated the increased sapphire strength, indicating that a nearly flawless surface polish is the primary cause of strengthening, while an unusual mounting arrangement also significantly contributes to a larger effective strength. Phase 2 work will complete specification and demonstration of these windows, and will fabricate a set for use at NASA. The enhanced capabilities of these high performance sapphire windows will lead to many diagnostic capabilities not previously possible, as well as new applications for sapphire.

  7. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land. PMID:22951970

  8. Flooring for Schools: Unsightly Walkways

    ERIC Educational Resources Information Center

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  9. Adaptive Liquid Crystal Windows

    SciTech Connect

    Taheri, Bahman; Bodnar, Volodymyr

    2011-12-31

    Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft × 1ft prototype panels for the world’s first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicron’s patented e-Tint® technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of

  10. BERKELEY LAB WINDOW

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records frommore » IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of

  11. BERKELEY LAB WINDOW

    SciTech Connect

    Curcija, Dragan Charlie; Zhu, Ling; Czarnecki, Stephen; Mitchell, Robin D.; Kohler, Christian; Vidanovic, Simon V.; Huizenga, Charlie

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records from IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of the

  12. Sea-Floor Spreading and Transform Faults

    ERIC Educational Resources Information Center

    Armstrong, Ronald E.; And Others

    1978-01-01

    Presents the Crustal Evolution Education Project (CEEP) instructional module on Sea-Floor Spreading and Transform Faults. The module includes activities and materials required, procedures, summary questions, and extension ideas for teaching Sea-Floor Spreading. (SL)

  13. Inborn Errors of Metabolism: the metabolome is our world. Presidential address for the 11th International Congress of Inborn Errors of Metabolism (ICIEM).

    PubMed

    McCabe, Edward R B

    2010-05-01

    Thank you for honoring me by allowing me to serve as president of the 11th International Congress of Inborn Errors of Metabolism (ICIEM). The science brought by the IEM community to the Congress was quite impressive and demonstrated the quality of research within this community. In this address, I will consider briefly the history of IEMs to determine how we have arrived where we are, and will spend more time ascertaining our place in the current biomedical community and our role in determining the future of personalized medicine. In the 1950s-1970s new tools were added to expand our ability to interrogate the metabolome and the result was an explosive increase in the number of IEMs. This set the stage for expanded newborn screening (NBS) by tandem mass spectrometry (MS/MS) to identify these patients and to intervene pre-symptomatically. The complexity of the metabolome has led us to utilize the mathematical algorithms of systems biology to reduce high dimensionality data to low dimensionality output. However, the metabolome does not exist in isolation and we must learn how to integrate the metabolome with other xomics. The metabolome is our world and the IEM community has much to share with the broader xomics communities by integrating what we have learned with the other xomics communities. They are seeking access to the metabolome as a closer measure of phenotype, and we are already extremely comfortable and competent in the metabolomic space. But we should not be insular in our occupation of this space. NBS should be the model for personalized medicine, because it is already functioning as testing system for predictive, preventive and personalized care. We have been working in the area of NBS for nearly a half century and have many lessons learned that will be valuable to the practitioners of personalized medicine - lessons that they should not have to rediscover. We must embrace the international IEM community to meet population trends and to improve the care

  14. The 11th Century Collapse of Aqaba on the North Coast of the Gulf of Aqaba, Dead Sea Fault System, Jordan

    NASA Astrophysics Data System (ADS)

    Niemi, Tina; Allison, Alivia; Rucker, John

    2010-05-01

    The city of Aqaba is situated at the northern end of the Gulf of Aqaba along the southern part of the Dead Sea Transform Fault. Based both on the historical accounts and archaeological excavations, it is clear that earthquakes have played a significant role in the history of the region. The early Islamic city of Ayla was probably founded around 650 A.D., suffered some damage as a result of the 748 A.D. earthquake, and saw extensive reconstruction around the beginning of the Abbasid period (Whitcomb, 1994). Among other evidence of earthquake destruction at the Islamic city of Ayla is the leaning city Sea wall. Stratified pottery collections from our February 2009 excavation of the buttress of the city wall of Ayla strongly suggest a date for revetment construction in the early 11th Century. Based on the fact that the most recent pottery from sealed loci inside the buttress wall is late Abbasid - Fatimid and the absence of handmade pottery often found in the abandonment phases, the buttress was likely constructed after liquefaction damage from the 1033 earthquake. Damage from distant source earthquakes (748 and 1033) in the ancient city was repaired in antiquity. The destruction and loss of life (accounts claim that all but 12 residents who had been out fishing were killed) caused by the 1068 earthquake may account for the relative ease with which Baldwin I of Jerusalem took over when he arrived with a small retinue in 1116 A.D. Paleoseismic trenches in the modern city of Aqaba indicate that at least two earthquakes have occurred after deposits dated to 1045-1278 A.D. A preliminary analysis of the stratigraphy in new trenches in the Taba sabkha north of Aqaba shows at least three separate faulting events, with the most recent event located at a depth of 70 cm below the ground surface. This finding supports the initial ground penetrating radar survey conducted at the southern end of the Taba sabkha by Abueladas (2005). These data document a long period of quiescence

  15. Energy performance analysis of prototype electrochromic windows

    SciTech Connect

    Sullivan, R.; Rubin, M.; Selkowitz, S.

    1996-12-01

    This paper presents the results of a study investigating the energy performance of three newly developed prototype electrochromic devices. The DOE-2.1 E energy simulation program was used to analyze the annual cooling, lighting, and total electric energy use and peak demand as a function of window type and size. The authors simulated a prototypical commercial office building module located in the cooling-dominated locations of Phoenix, AZ and Miami, FL. Heating energy use was also studied in the heating-dominated location of Madison, WI. Daylight illuminance was used to control electrochromic state-switching. Two types of window systems were analyzed; i.e., the outer pane electrochromic glazing was combined with either a conventional low-E or a spectrally selective inner pane. The properties of the electrochromic glazings are based on measured data of new prototypes developed as part of a cooperative DOE-industry program. The results show the largest difference in annual electric energy performance between the different window types occurs in Phoenix and is about 6.5 kWh/m{sup 2} floor area (0.60 kWh/ft{sup 2}) which can represent a cost of about $.52/m{sup 2} ($.05/ft{sup 2}) using electricity costing $.08/kWh. In heating-dominated locations, the electrochromic should be maintained in its bleached state during the heating season to take advantage of beneficial solar heat gain which would reduce the amount of required heating. This also means that the electrochromic window with the largest solar heat gain coefficient is best.

  16. "Stained Glass" Landscape Windows

    ERIC Educational Resources Information Center

    Vannata, Janine

    2008-01-01

    Both adults and children alike marvel at the grand vivid stained-glass windows created by American artist Louis Comfort Tiffany. Today he is commonly recognized as one of America's most influential designers and artists throughout the last nineteenth and early twentieth century. In the lesson described in this article, students created their own…

  17. Exploring Shop Window Displays

    ERIC Educational Resources Information Center

    Christopoulou, Martha

    2011-01-01

    Using visual resources from everyday life in art lessons can enrich students' knowledge about the creation of visual images, artifacts, and sites, and develop their critical understanding about the cultural impact of these images and their effects on people's lives. Through examining an exhibition in the windows of Selfridges department store in…

  18. Opening the Literature Window

    ERIC Educational Resources Information Center

    Jago, Carol

    2012-01-01

    Great literature gives students a window to other places and times, but it often requires students to step outside their comfort zones and take on challenges they wouldn't usually attempt. Unfortunately, research shows that many schools are not assigning literature that pushes students beyond their current reading level. Jago encourages teachers…

  19. Foamglass solar window collector

    NASA Astrophysics Data System (ADS)

    Grande, P. C.

    Solar heating of a living area by means of a foamglass window collector is reported. The collector was built with readily available materials available at most local hardware stores. The payback period was found to be 3.7 years, slightly longer than anticipated.

  20. Apollo window meteoroid experiment

    NASA Technical Reports Server (NTRS)

    Cour-Palais, B. G.; Flaherty, R. E.; Brown, M. L.

    1972-01-01

    Apollo window meteoroid experiment for obtaining data from crater counts and analysis of meteoroid residue combined with fused glass in described. A preliminary estimate of the flux resulting from seven Apollo spacecraft is found to be in agreement with the Surveyor 3 data, but is lower than the model environment.

  1. Software: Looking Through WINDOW.

    ERIC Educational Resources Information Center

    Classroom Computer News, 1983

    1983-01-01

    Reviews the educational value, design quality, and ease of use of "WINDOW," an educational "magazine" on a disk for the Apple II/IIe microcomputer. Indicates that the articles, software reviews, and other informative material are greatly enhanced by sound, graphics, and the chance to try out reviewed programs. (JN)

  2. Candles in Our Windows

    ERIC Educational Resources Information Center

    McGrath, Kathryn

    2005-01-01

    "Candles in Our Windows"--also titled "Nightlights"--is a play developed for elementary and middle school students about how residents in Billings, Montana, took a stand against hate. Last March, the 6th-grade students of Woodland Elementary School in New Jersey performed an early version of the play based on a children's book, "The Christmas…

  3. Migration to Windows NT.

    ERIC Educational Resources Information Center

    Doles, Daniel T.

    In the constantly changing world of technology, migration is not only inevitable but many times necessary for survival, especially when the end result is simplicity for both users and IT support staff. This paper describes the migration at Franklin College (Indiana). It discusses the reasons for selecting Windows NT, the steps taken to complete…

  4. Windows to Art Excitement.

    ERIC Educational Resources Information Center

    Laird, Shirley; Crumpecker, Cheryl

    2003-01-01

    Describes an art project that aimed to bring more attention to an art program. Explains that the students created themed murals on the windows of the art classroom, such as a "Jungle,""Ocean,""Masterpiece Paintings," and "Rainforest Tree Frogs." Discusses how the murals were created. (CMK)

  5. Microwave Workshop for Windows.

    ERIC Educational Resources Information Center

    White, Colin

    1998-01-01

    "Microwave Workshop for Windows" consists of three programs that act as teaching aid and provide a circuit design utility within the field of microwave engineering. The first program is a computer representation of a graphical design tool; the second is an accurate visual and analytical representation of a microwave test bench; the third is a more…

  6. Windows and lighting program

    SciTech Connect

    Not Available

    1990-06-01

    More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

  7. Windows into Art Classrooms.

    ERIC Educational Resources Information Center

    Grauer, Kit, Ed.

    1995-01-01

    An editorial by Kit Grauer introduces this collection of articles which establish that there is no such thing as a simple definition of art education even within one culture, and that people's views can be reflected by art educators across the world. The first article, "A Window on Three Singapore Art Classrooms" (Jane Chia; John Matthews; Paul…

  8. Sliding window construction

    SciTech Connect

    Klompenburg, M.V.

    1987-07-28

    A window assembly is described in a window frame. The frame includes a head, a sill, and opposite jambs, the assembly comprising: first and second sashes each having interior and exterior surfaces, a top, a bottom, and opposite first and second sides extending between the top and the bottom: the first sash being laterally movably within the window frame between a closed position and an open position wherein the first sash is substantially in a non-planar position relative to the second sash; track means extending along one of the sill or head of the window frame; first track follower means connected to one of the top or the bottom of the first sash adjacent the first side and cooperating with the track means for supporting and guiding the first sash during lateral movement between the open and closed positions; and the track means having an opening for releasing the track follower means for cooperation only when the first sash is in the open position such that the first sash is pivotal about a vertical axis adjacent the second side between the open position and a maintenance position.

  9. Superconductive radiofrequency window assembly

    DOEpatents

    Phillips, Harry Lawrence; Elliott, Thomas S.

    1998-01-01

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  10. Superconducting radiofrequency window assembly

    DOEpatents

    Phillips, Harry L.; Elliott, Thomas S.

    1997-01-01

    The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

  11. Design issues for floor control protocols

    NASA Astrophysics Data System (ADS)

    Dommel, Hans-Peter; Garcia-Luna-Aceves, Jose J.

    1995-03-01

    Floor control allows users of networked multimedia applications to remotely share resources like cursors, data views, video and audio channels, or entire applications without access conflicts. Floors are mutually exclusive permissions, granted dynamically to collaborating users, mitigating race conditions and guaranteeing fair and deadlock- free resource access. Although floor control is an early concept within computer-supported cooperative work, no framework exists and current floor control mechanisms are often limited to simple objects. While small-scale collaboration can be facilitated by social conventions, the importance of floors becomes evident for large-scale application sharing and teleconferencing orchestration. In this paper, the concept of a scalable session protocol is enhanced with floor control. Characteristics of collaborative environments are discussed, and session and floor control are discerned. The system's and user's requirements perspectives are discussed, including distributed storage policies, packet structure and user-interface design for floor presentation, manipulation, and triggering conditions for floor migration. Interaction stages between users, and scenarios of participant withdrawal, late joins, and establishment of subgroups are elicited with respect to floor generation, bookkeeping, and passing. An API is proposed to standardize and integrate floor control among shared applications. Finally, a concise classification for existing systems with a notion of floor control is introduced.

  12. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  13. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  14. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  15. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  16. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  17. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  18. Floor furnace burns to children.

    PubMed

    Berger, L R; Kalishman, S

    1983-01-01

    Three children with grid-like second-degree burns of their extremities from contact with floor furnace registers prompted an examination of this thermal hazard. Average temperature of the gratings was 294 degrees F (146 degrees C), with a range of 180 degrees to 375 degrees F (82.2 degrees to 191 degrees C). All of the furnaces tested were positioned at the entrance to bedrooms and had so little clearance that it was impossible to walk around them without contact with their surface. Infants and toddlers are at particular risk: 1 or 2 seconds of exposure would be expected to produce a serious burn. Suggestions for preventing burns from floor furnaces include turning them off when young children are at home; installing barrier gates to prevent children from coming in contact with the registers; and developing a surface coating or replacement grate with less hazardous thermal properties. PMID:6848984

  19. Post partum pelvic floor changes.

    PubMed

    Fonti, Ylenia; Giordano, Rosalba; Cacciatore, Alessandra; Romano, Mattea; La Rosa, Beatrice

    2009-10-01

    Pelvic-perineal dysfunctions, are the most common diseases in women after pregnancy. Urinary incontinence and genital prolapsy, often associated, are the most important consequences of childbirth and are determined by specific alterations in the structure of neurological and musculo-fascial pelvic support.Causation is difficult to prove because symptom occur remote from delivery.Furthermore it is unclear whether changes are secondary to the method of childbirth or to the pregnancy itself.This controversy fuels the debate about whether or not women should be offered the choice of elective caesarean delivery to avoid the development of subsequent pelvic floor disfunction.But it has been demonstrated that pregnancy itself, by means of mechanical changes of pelvic statics and changes in hormones, can be a significant risk factor for these diseases. Especially is the first child to be decisive for the stability of the pelvic floor.During pregnancy, the progressive increase in volume of the uterus subject perineal structures to a major overload. During delivery, the parties present and passes through the urogenital hiatus leading to growing pressure on the tissues causing the stretching of the pelvic floor with possible muscle damage, connective tissue and / or nervous.In this article we aim to describe genitourinary post partum changes with particular attention to the impact of pregnancy or childbirth on these changes. PMID:22439048

  20. Pelvic floor ultrasonography: an update.

    PubMed

    Shek, K L; Dietz, H-P

    2013-02-01

    Female pelvic floor dysfunction encompasses a number of highly prevalent clinical conditions such as female pelvic organ prolapse, urinary and fecal incontinence, and sexual dysfunction. The etiology and pathophysiology of those conditions are, however, not well understood. Recent technological advances have seen a surge in the use of imaging, both in research and clinical practice. Among the techniques available such as sonography, X-ray, computed tomography and magnetic resonance imaging, ultrasound is superior for pelvic floor imaging, especially in the form of perineal or translabial imaging. The technique is safe with no radiation, simple, cheap, easily accessible and provides high spatial and temporal resolutions. Translabial or perineal ultrasound is useful in determining residual urinary volume, detrusor wall thickness, bladder neck mobility and in assessing pelvic organ prolapse as well as levator function and anatomy. It is at least equivalent to other imaging techniques in diagnosing, such diverse conditions as urethral diverticula, rectal intussusception and avulsion of the puborectalis muscle. Ultrasound is the only imaging method capable of visualizing modern slings and mesh implants and may help selecting patients for implant surgery. Delivery-related levator injury seems to be the most important etiological factor for pelvic organ prolapse and recurrence after prolapse surgery, and it is most conveniently diagnosed by pelvic floor ultrasound. This review gives an overview of the methodology. Its main current uses in clinical assessment and research will also be discussed. PMID:23412016

  1. Double window viewing chamber assembly

    NASA Technical Reports Server (NTRS)

    Keller, V. W. (Inventor); Owen, R. B. (Inventor); Elkins, B. R. (Inventor); White, W. T. (Inventor)

    1986-01-01

    A viewing chamber which permits observation of a sample retained therein includes a pair of double window assemblies mounted in opposed openings in the walls thereof so that a light beam can directly enter and exit from the chamber. A flexible mounting arrangement for the outer windows of the window assemblies enables the windows to be brought into proper alignment. An electrical heating arrangement prevents fogging of the outer windows whereas desiccated air in the volume between the outer and inner windows prevents fogging of the latter.

  2. VIEW OF THREE SOUTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE SOUTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED ADJACENT TO THE ALTER. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  3. VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED ADJACENT TO THE ALTAR. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  4. VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THREE NORTH FACING STAINED GLASS WINDOWS. THESE WINDOWS ARE LOCATED JUST BELOW THE CHOIR LOFT. - U.S. Naval Base, Pearl Harbor, Chapel, Corner of Oakley & Nimitz Street, Pearl City, Honolulu County, HI

  5. details: window jamb from first period of construction; window jamb, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    details: window jamb from first period of construction; window jamb, sill profile, and transom profile from second period of construction - Joseph Poffenberger Farm, House, 17834 Mansfield Avenue, Sharpsburg, Washington County, MD

  6. US-Japan workshop on field-reversed configurations with steady-state high-temperature fusion plasmas and the 11th US-Japan workshop on compact toroids

    SciTech Connect

    Barnes, D.C.; Fernandez, J.C.; Rej, D.J.

    1990-05-01

    The US-Japan Workshop on Field-Reversed Configurations with Steady-State High-Temperature Fusion Plasma and the 11th US-Japan Workshop on Compact Toroids were held at Los Alamos National Laboratory, Los Alamos, New Mexico on November 7--9, 1989. These proceedings contain the papers presented at the workshops as submitted by the authors. These papers have been indexed separately.

  7. Fourier and Wavelet Based Characterisation of the Ionospheric Response to the Solar Eclipse of August, the 11th, 1999, Measured Through 1-minute Vertical Ionospheric Sounding

    NASA Astrophysics Data System (ADS)

    Sauli, P.; Abry, P.; Boska, J.

    2004-05-01

    The aim of the present work is to study the ionospheric response induced by the solar eclipse of August, the 11th, 1999. We provide Fourier and wavelet based characterisations of the propagation of the acoustic-gravity waves induced by the solar eclipse. The analysed data consist of profiles of electron concentration. They are derived from 1-minute vertical incidence ionospheric sounding measurements, performed at the Pruhonice observatory (Czech republic, 49.9N, 14.5E). The chosen 1-minute high sampling rate aims at enabling us to specifically see modes below acoustic cut-off period. The August period was characterized by Solar Flux F10.7 = 128, steady solar wind, quiet magnetospheric conditions, a low geomagnetic activity (Dst index varies from -10 nT to -20 nT, Σ Kp index reached value of 12+). The eclipse was notably exceptional in uniform solar disk. These conditions and fact that the culmination of the solar eclipse over central Europe occurred at local noon are such that the observed ionospheric response is mainly that of the solar eclipse. We provide a full characterization of the propagation of the waves in terms of times of occurrence, group and phase velocities, propagation direction, characteristic period and lifetime of the particular wave structure. However, ionospheric vertical sounding technique enables us to deal with vertical components of each characteristic. Parameters are estimated combining Fourier and wavelet analysis. Our conclusions confirm earlier theoretical and experimental findings, reported in [Altadill et al., 2001; Farges et al., 2001; Muller-Wodarg et al.,1998] regarding the generation and propagation of gravity waves and provide complementary characterisation using wavelet approaches. We also report a new evidence for the generation and propagation of acoustic waves induced by the solar eclipse through the ionospheric F region. Up to our knowledge, this is the first time that acoustic waves can be demonstrated based on ionospheric

  8. PREFACE: 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) and 25th Symposium on Plasma Science for Materials (SPSM-25)

    NASA Astrophysics Data System (ADS)

    Watanabe, Takayuki; Kaneko, Toshio; Sekine, Makoto; Tanaka, Yasunori

    2013-06-01

    The 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) was held in Kyoto, Japan on 2-5 October 2012 with the 25th Symposium on Plasma Science for Materials (SPSM-25). SPSM has been held annually since 1988 under the sponsorship of The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science (JSPS). This symposium is one of the major activities of the Committee, which is organized by researchers in academia and industry for the purpose of advancing intersectional scientific information exchange and discussion of science and technology of plasma materials processing. APCPST and SPSM are jointly held biennially to survey the current status of low temperature and thermal plasma physics and chemistry for industrial applications. The whole area of plasma processing was covered from fundamentals to applications. Previous meetings were held in China, Japan, Korea, and Australia, attended by scientists from the Asia-Pacific and other countries. The joint conference was organized in plenary lectures, invited, contributed oral presentations and poster sessions. At this meeting, we had 386 participants from 10 countries and 398 presentations, including 26 invited presentations. This year, we arranged special topical sessions that covered green innovation, life innovation, and technical reports from industry. This conference seeks to bring the plasma community together and to create a forum for discussing the latest developments and issues, the challenges ahead in the field of plasma research and applications among engineers and scientists in Asia, the Pacific Rim, as well as Europe. This volume presents 44 papers that were selected via a strict peer-review process from full papers submitted for the proceedings of the conference. The topics range from the basic physics and chemistry of plasma processing to a broad variety of materials processing and environmental applications. This volume offers an overview of recent

  9. Lens window simplifies TDL housing

    NASA Technical Reports Server (NTRS)

    Robinson, D. M.; Rowland, C. W.

    1979-01-01

    Lens window seal in tunable-diode-laser housing replaces plan parallel window. Lens seals housing and acts as optical-output coupler, thus eliminating need for additional reimaging or collimating optics.

  10. 20. TYPICAL VIEW OF FRONT WINDOWS FROM 4TH TO 9TH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. TYPICAL VIEW OF FRONT WINDOWS FROM 4TH TO 9TH FLOOR WITH WHITE GLAZED TERRA COTTA SILL AND HEADERS. MULLIONS ARE ORANGE BROWN BRICKS LIKE THE WALLS. BRICKS ARE IN FLEMISH BOND PATTERN. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  11. A Window-Washing Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2010-01-01

    Skyscrapers sure do have a lot of windows, and these windows are cleaned and checked regularly. All this takes time, money, and puts workers at potential risk. Might there be a better way to do it? In this article, the author discusses a window-washing challenge and describes how students can tackle this task, pick up the challenge, and creatively…

  12. Beam Window for Pressure Chambers

    NASA Technical Reports Server (NTRS)

    Bransford, J. W.; Austin, J. G., Jr.

    1985-01-01

    Window resists products of combustion experiments. Sodium chloride window seals over chamber pressures from 0.1 to 13.8 MPa while absorbing minimal energy from CO2 laser beam that passes through it into chamber. Window inexpensive and easily replacable.

  13. Windows: The Benefits Are Clear.

    ERIC Educational Resources Information Center

    Sturgeon, Julie

    1999-01-01

    Discusses the importance of specifying windows in a school renovation or building project in order to energize a campus. Explains how windows are psychologically uplifting, how glass accentuates excitement and its shapes signal stability, and how windows convey the institution's confidence in the present. (GR)

  14. Scaling on a limestone flooring

    NASA Astrophysics Data System (ADS)

    Carmona-Quiroga, P. M.; Blanco-Varela, M. T.; Martínez-Ramírez, S.

    2012-04-01

    Natural stone can be use on nearly every surface, inside and outside buildings, but decay is more commonly reported from the ones exposed to outdoor aggressively conditions. This study instead, is an example of limestone weathering of uncertain origin in the interior of a residential building. The stone, used as flooring, started to exhibit loss of material in the form of scaling. These damages were observed before the building, localized in the South of Spain (Málaga), was inhabited. Moreover, according to the company the limestone satisfies the following European standards UNE-EN 1341: 2002, UNE-EN 1343: 2003; UNE-EN 12058: 2004 for floorings. Under these circumstances the main objective of this study was to assess the causes of this phenomenon. For this reason the composition of the mortar was determined and the stone was characterized from a mineralogical and petrological point of view. The last material, which is a fossiliferous limestone from Egypt with natural fissure lines, is mainly composed of calcite, being quartz, kaolinite and apatite minor phases. Moreover, under different spectroscopic and microscopic techniques (FTIR, micro-Raman, SEM-EDX, etc) samples of the weathered, taken directly from the buildings, and unweathered limestone tiles were examined and a new mineralogical phase, trona, was identified at scaled areas which are connected with the natural veins of the stone. In fact, through BSE-mapping the presence of sodium has been detected in these veins. This soluble sodium carbonate would was dissolved in the natural waters from which limestone was precipitated and would migrate with the ascendant capilar humidity and crystallized near the surface of the stone starting the scaling phenomenon which in historic masonry could be very damaging. Therefore, the weathering of the limestone would be related with the hygroscopic behaviour of this salt, but not with the constructive methods used. This makes the limestone unable to be used on restoration

  15. Sunlight Responsive Thermochromic Window System

    SciTech Connect

    Millett, F,A; Byker,H, J

    2006-10-27

    Pleotint has embarked on a novel approach with our Sunlight Responsive Thermochromic, SRT™, windows. We are integrating dynamic sunlight control, high insulation values and low solar heat gain together in a high performance window. The Pleotint SRT window is dynamic because it reversibly changes light transmission based on thermochromics activated directly by the heating effect of sunlight. We can achieve a window package with low solar heat gain coefficient (SHGC), a low U value and high insulation. At the same time our windows provide good daylighting. Our innovative window design offers architects and building designers the opportunity to choose their desired energy performance, excellent sound reduction, external pane can be self-cleaning, or a resistance to wind load, blasts, bullets or hurricanes. SRT windows would provide energy savings that are estimated at up to 30% over traditional window systems. Glass fabricators will be able to use existing equipment to make the SRT window while adding value and flexibility to the basic design. Glazing installers will have the ability to fit the windows with traditional methods without wires, power supplies and controllers. SRT windows can be retrofit into existing buildings,

  16. Pelvic floor ultrasound: a review.

    PubMed

    Dietz, Hans Peter

    2010-04-01

    Imaging currently plays a limited role in the investigation of pelvic floor disorders. It is obvious that magnetic resonance imaging has limitations in urogynecology and female urology at present due to cost and access limitations and due to the fact that it is generally a static, not a dynamic, method. However, none of those limitations apply to sonography, a diagnostic method that is very much part of general practice in obstetrics and gynecology. Translabial or transperineal ultrasound is helpful in determining residual urine; detrusor wall thickness; bladder neck mobility; urethral integrity; anterior, central, and posterior compartment prolapse; and levator anatomy and function. It is at least equivalent to other imaging methods in visualizing such diverse conditions as urethral diverticula, rectal intussusception, mesh dislodgment, and avulsion of the puborectalis muscle. Ultrasound is the only imaging method able to visualize modern mesh slings and implants and may predict who actually needs such implants. Delivery-related levator trauma is the most important known etiologic factor for pelvic organ prolapse and not difficult to diagnose on 3-/4-dimensional and even on 2-dimensional pelvic floor ultrasound. It is likely that this will be an important driver behind the universal use of this technology. This review gives an overview of the method and its main current uses in clinical assessment and research. PMID:20350640

  17. EDITORIAL: Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011) Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011)

    NASA Astrophysics Data System (ADS)

    Cho, Young-Ho

    2012-09-01

    This special section of Journal of Micromechanics and Microengineering features papers selected from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011), held at Sejong Hotel in Seoul, Korea during 15-18 November 2011. Since the first PowerMEMS workshop held in Sendai, Japan in 2000, the workshop has developed as the premier forum for reporting research results in micro and nanotechnology for power generation, energy conversion, harvesting and processing applications, including in-depth technical issues on nanostructures and materials for small-scale high-density energy and thermal management. Potential PowerMEMS applications cover not only portable power devices for consumer electronics and remote sensors, but also micro engines, impulsive thrusters and fuel cells for systems ranging from the nanometer to the millimeter scale. The 2011 technical program consists of 1 plenary talk, 4 invited talks and 118 contributed presentations. The 48 oral and 70 poster presentations, selected by 27 Technical Program Committee Members from 131 submitted abstracts, have stimulated lively discussion maximizing the interaction between participants. Among them, this special section includes 9 papers covering micro-scale power generators, energy converters, harvesters, thrusters and thermal coolers. Finally, we are grateful to the members of the International Steering Committee, the Technical Program Committee, and the Local Organizing Committee for their efforts and contributions to PowerMEMS 2011. We also thank the two companies Samsung Electro-Mechanics and LG Elite for technical tour arrangements. Special thanks go to Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, as well as to the staff of IOP Publishing for making this special section possible.

  18. PREFACE: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis

    NASA Astrophysics Data System (ADS)

    2010-07-01

    This volume of IOP Conference Series: Materials Science and Engineering contains papers from the 11th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from 10-14 May 2009 in the Hotel Faltom, Gdynia, Poland. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on careers in microbeam analysis can meet and discuss with the established experts. The workshops have a very distinct format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. For this workshop EMAS invited speakers on the following topics: EPMA, EBSD, fast energy-dispersive X-ray spectroscopy, three-dimensional microanalysis, and micro-and nanoanalysis in the natural resources industry. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 69 posters from 16 countries were on display at the meeting and that the participants came from as far away as Japan and the USA. A number of participants with posters were invited to give short oral presentations of their work in two dedicated sessions. As at previous workshops there was also a special oral session for young scientists. Small cash prizes were awarded for the three best posters and for the best oral presentation by a young scientist. The prize for the best poster went to the contribution by G Tylko, S Dubchak, Z Banach and K Turnau, entitled Monte Carlo simulation for an assessment of standard validity and quantitative X-ray microanalysis in plant. Joanna Wojewoda-Budka of the Institute of Metallurgy and Materials Science, Krakow, received the prize for the best oral presentation by a

  19. PREFACE: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis

    NASA Astrophysics Data System (ADS)

    2010-07-01

    This volume of IOP Conference Series: Materials Science and Engineering contains papers from the 11th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from 10-14 May 2009 in the Hotel Faltom, Gdynia, Poland. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on careers in microbeam analysis can meet and discuss with the established experts. The workshops have a very distinct format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. For this workshop EMAS invited speakers on the following topics: EPMA, EBSD, fast energy-dispersive X-ray spectroscopy, three-dimensional microanalysis, and micro-and nanoanalysis in the natural resources industry. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 69 posters from 16 countries were on display at the meeting and that the participants came from as far away as Japan and the USA. A number of participants with posters were invited to give short oral presentations of their work in two dedicated sessions. As at previous workshops there was also a special oral session for young scientists. Small cash prizes were awarded for the three best posters and for the best oral presentation by a young scientist. The prize for the best poster went to the contribution by G Tylko, S Dubchak, Z Banach and K Turnau, entitled Monte Carlo simulation for an assessment of standard validity and quantitative X-ray microanalysis in plant. Joanna Wojewoda-Budka of the Institute of Metallurgy and Materials Science, Krakow, received the prize for the best oral presentation by a

  20. A&M. TAN607 third floor plan for hot shop. Crane control ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 third floor plan for hot shop. Crane control rooms and their shielding windows. Plenum. Wall rack for manipulators in hot shop. Ralph M. Parsons 902-3-ANP-607-A 103. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106755 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  1. A&M. Hot cell addition (TAN633). Floor plan, elevations. Arrangement of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Hot cell addition (TAN-633). Floor plan, elevations. Arrangement of monorail along corridor, four hot cells, plug access openings, viewing windows, photo darkroom. Ralph M. Parsons 1229-13-ANP/GE-3-633-A-1. Date: December 1956 as redrawn in August 1998. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0633-00-693-107315 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  2. TRITIUM LABORATORY, TRA666, INTERIOR. MAIN FLOOR. CONTROL ROOM ENCLOSURE AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TRITIUM LABORATORY, TRA-666, INTERIOR. MAIN FLOOR. CONTROL ROOM ENCLOSURE AT CENTER OF VIEW. SIGN ABOVE DOOR SAYS "HYDRAULIC TEST FACILITY CONTROL ROOM." SIGN IN WINDOW SAYS "EATING AREA." "EVACUATION AND EMERGENCY INFORMATION" IS POSTED ON CABINET AT LEFT OF VIEW. INL NEGATIVE NO. HD30-2-3. Mike Crane, Photographer, 6/2001 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. Crash Tests of Protective Airplane Floors

    NASA Technical Reports Server (NTRS)

    Carden, H. D.

    1986-01-01

    Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

  4. Windows on the axion

    SciTech Connect

    Turner, M.S.

    1989-04-01

    Peccei-Quinn symmetry with attendant axion is a most compelling, and perhaps the most minimal, extension of the standard model, as it provides a very elegant solution to the nagging strong CP-problem associated with the THETA vacuum structure of QCD. However, particle physics gives little guidance as to the axion mass; a priori, the plausible values span the range: 10/sup /minus/12/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup 6/ eV, some 18 orders-of-magnitude. Axions have a host of interesting astrophysical and cosmological effects, including, modifying the evolution of stars of all types (our sun, red giants, white dwarfs, and neutron stars), contributing significantly to the mass density of the Universe today, and producing detectable line radiation through the decays of relic axions. Consideration of these effects has probed 14 orders-of-magnitude in axion mass, and has left open only two windows for further exploration: 10/sup /minus/6/ eV /approx lt/ m/sub a/ /approx lt/ 10/sup /minus/3/ eV and 1 eV /approx lt/ m/sub a/ /approx lt/ 5 eV (hadronic axions only). Both these windows are accessible to experiment, and a variety of very interesting experiments, all of which involve ''heavenly axions,'' are being planned or are underway. 58 refs., 6 figs., 1 tab.

  5. The floor plate: multiple cells, multiple signals.

    PubMed

    Placzek, Marysia; Briscoe, James

    2005-03-01

    One of the key organizers in the CNS is the floor plate - a group of cells that is responsible for instructing neural cells to acquire distinctive fates, and that has an important role in establishing the elaborate neuronal networks that underlie the function of the brain and spinal cord. In recent years, considerable controversy has arisen over the mechanism by which floor plate cells form. Here, we describe recent evidence that indicates that discrete populations of floor plate cells, with characteristic molecular properties, form in different regions of the neuraxis, and we discuss data that imply that the mode of floor plate induction varies along the anteroposterior axis. PMID:15738958

  6. Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof Framing and Roof; Longitudinal Section, Cross Section, End Elevation - Eames Covered Bridge, Spanning Henderson Creek, Oquawka, Henderson County, IL

  7. 17. 4th floor roof, view south, 4th and 5th floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 4th floor roof, view south, 4th and 5th floor setback to left and atrium structure to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  8. Eastern Floor of Holden Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 15 April 2002) The Science Today's THEMIS image covers territory on the eastern floor of Holden Crater, which is located in region of the southern hemisphere called Noachis Terra. Holden Crater is 154 km in diameter and named after American Astronomer Edward Holden (1846-1914). This image shows a mottled surface with channels, hills, ridges and impact craters. The largest crater seen in this image is 5 km in diameter. This crater has gullies and what appears to be horizontal layers in its walls. The Story With its beautiful symmetry and gullies radially streaming down to the floor, the dominant crater in this image is an impressive focal point. Yet, it is really just a small crater within a much larger one named Holden Crater. Take a look at the context image to the right to see just how much bigger Holden Crater is. Then come back to the image strip that shows the mottled surface of Holden Crater's eastern floor in greater detail, and count how many hills, ridges, channels, and small impact craters can be seen. No perfectly smooth terrain abounds there, that's for sure. The textured terrain of Holden Crater has been particularly intriguing ever since the Mars Orbital Camera on the Mars Global Surveyor spacecraft found evidence of sedimentary rock layers there that might have formed in lakes or shallow seas in Mars' ancient past. This finding suggests that Mars may have been more like Earth long ago, with water on its surface. Holden Crater might even have held a lake long ago. No one knows for sure, but it's an exciting possibility. Why? If water was once on the surface of Mars long enough to form sedimentary materials, maybe it was there long enough for microbial life to have developed too. (Life as we know it just isn't possible without the long-term presence of liquid water.) The question of life on the red planet is certainly tantalizing, but scientists will need to engage in a huge amount of further investigation to begin to know the answer. That

  9. Neutrino floor at ultralow threshold

    NASA Astrophysics Data System (ADS)

    Strigari, Louis E.

    2016-05-01

    By lowering their energy threshold, direct dark matter searches can reach the neutrino floor with experimental technology that is now in development. The 7Be flux can be detected with ˜10 eV nuclear recoil energy threshold and 50 kg/yr exposure. The p e p flux can be detected with ˜3 ton/yr exposure, and the first detection of the CNO flux is possible with similar exposure. The p p flux can be detected with threshold of ˜eV and only ˜ kg /yr exposure. These can be the first pure neutral current measurements of the low-energy solar neutrino flux. Measuring this flux is important for low mass dark matter searches and for understanding the solar interior.

  10. The impact of teacher assigned but not graded compared to teacher assigned and graded chemistry homework on the formative and summative chemistry assessment scores of 11th-grade students with varying chemistry potential

    NASA Astrophysics Data System (ADS)

    Wilson, Jennifer L.

    The study analyzed 2005 posttest data compared to 2008 posttest data to determine student end of school year academic achievement outcomes across three academic levels (above average, average, and below average chemistry potential) and two teacher homework evaluation methods (assigned but not graded and assigned and graded) on teacher prepared 11th-grade assessments, district prepared 11th-grade assessment, and district graduation requirement physical science strand 11th-grade science Essential Learner Outcome assessment. Overall, results indicated that students with above average (n = 16), average, (n = 17) and below average (n = 14) chemistry potential whom were given teacher assigned and graded chemistry homework compared to students with above average (n = 17), average (n = 15), and below average (n = 19) chemistry potential whom were given teacher assigned but not graded chemistry homework had statistically significantly higher independent t test matter homework scores while atoms, naming, and reactions homework scores were generally in the direction of higher but not significant scores for students given graded homework regardless of their chemistry potential. Furthermore, students of above average and below average chemistry potential who were given assigned and graded chemistry homework performed statistically significantly better on the 11th-grade district prepared chemistry final and the district prepared physical science strand Essential Learner Outcome assessment t test results compared to students with the same chemistry potential given assigned but not graded chemistry homework, suggesting that the graded chemistry condition may have contributed to improved long term learning and retention of chemistry knowledge. Finally, the coefficient of determination (r2 = .95) measure of strength of relationship between not completing, not graded chemistry homework and a corresponding drop in chemistry assessment scores for all students was 95% and the

  11. 16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR WOOD BLOCK FLOORING LOOKING EAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  12. Window defect planar mapping technique

    NASA Technical Reports Server (NTRS)

    Minton, F. R.; Minton, U. O. (Inventor)

    1976-01-01

    A method of planar mapping defects in a window having an edge surface and a planar surface. The method is comprised of steps for mounting the window on a support surface. Then a light sensitive paper is placed adjacent to the window surface. A light source is positioned adjacent to the window edge. The window is then illuminated with the source of light for a predetermined interval of time. Defects on the surface of the glass, as well as in the interior of the glass are detected by analyzing the developed light sensitive paper. The light source must be in the form of optical fibers or a light tube whose light transmitting ends are placed near the edge surface of the window.

  13. Window Observational Research Facility (WORF)

    NASA Technical Reports Server (NTRS)

    Pelfrey, Joseph; Sledd, Annette

    2007-01-01

    This viewgraph document concerns the Window Observational Research Facility (WORF) Rack, a unique facility designed for use with the US Lab Destiny Module window. WORF will provide valuable resources for Earth Science payloads along with serving the purpose of protecting the lab window. The facility can be used for remote sensing instrumentation test and validation in a shirt sleeve environment. WORF will also provide a training platform for crewmembers to do orbital observations of other planetary bodies. WORF payloads will be able to conduct terrestrial studies utilizing the data collected from utilizing WORF and the lab window.

  14. Subject Responses to Electrochromic Windows

    SciTech Connect

    Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

    2006-03-03

    Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

  15. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  16. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  17. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  18. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  19. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  20. Floor Time: Rethinking Play in the Classroom

    ERIC Educational Resources Information Center

    Kordt-Thomas, Chad; Lee, Ilene M.

    2006-01-01

    Floor time is a play-based, one-to-one approach to helping children develop relationships, language, and thinking. Developed by child psychiatrist Stanley Greenspan, floor time is helpful not only for children with special needs but also for children who are developing typically. It can be used by teachers, caregivers, and families in brief…

  1. Learning4Life on the Exhibit Floor

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2009-01-01

    The exhibit floor is a wealth of knowledge. One can read, view, and listen to information presented in many formats. Somewhere on the exhibit floor there are experts on every topic, ready and waiting for one's questions. But like any research topic, frequently a structured search is required to find the best answers. This article discusses how to…

  2. INTERIOR DETAIL, RETRACTABLE WINDOW SHUTTERS, VENETIAN WINDOW IN THE SOUTHEAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL, RETRACTABLE WINDOW SHUTTERS, VENETIAN WINDOW IN THE SOUTHEAST CABINET. (NOTE THE MIRRORED PANEL IN THE FORWARD SHUTTER’S LOWER SECTION. DURING THE HAMILTONIAN OCCUPANCY, MIRRORS LIKE THESE WERE USED LIBERALLY THROUGHOUT THE HOUSE’S PUBLIC ROOMS - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  3. Ultrasonic Inspection Of The LTAB Floor

    SciTech Connect

    Thomas, G

    2001-07-31

    The National Ignition Facility's (NIF) floor is damaged by transporter operations. Two basic operations, rotating the wheels in place and traversing the floor numerous times can cause failure in the grout layer. The floor is composed of top wear surface (Stonhard) and an osmotic grout layer on top of concrete, Fig. 1. An ultrasonic technique was implemented to assess the condition of the floor as part of a study to determine the damage mechanisms. The study considered damage scenarios and ways to avoid the damage. A possible solution is to install thin steel plates where the transporter traverses on the floor. These tests were conducted with a fully loaded transporter that applies up to 1300 psi loads to the floor. A contact ultrasonic technique evaluated the condition of the grout layer in NIF's floor. Figure 1 displays the configuration of the ultrasonic transducer on the floor. We inspected the floor after wheel rotation damage and after wheel traversal damage. Figure 2a and 2b are photographs of the portable ultrasonic system and data acquisition. We acquired ultrasonic signals in a known pristine area and a damaged area to calibrate the inspection. Figure 3 is a plot of the typical ultrasonic response from an undamaged area (black) overlapped with a signal (red) from a damaged area. The damage area data was acquired at a location next to a hole in the floor that was caused by the transporter. Five megahertz pulses are propagated from the transducer and through a Plexiglas buffer rod into the floor. The ultrasonic pulse reflects from each discontinuity in the floor. The ultrasonic signal reflects from the top surface, the Stonhard-to-grout interface, and the grout to concrete interface. We expect to see reflections from each of these interfaces in an undamaged floor. If the grout layer pulverizes then the high frequency signal cannot traverse the layer and the grout to concrete interface signal will decrease or vanish. The more damage to the grout the more the

  4. Destiny's Earth Observation Window

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Astronaut Michael J. Bloomfield, STS-110 mission commander, looks through the Earth observation window in the Destiny laboratory aboard the International Space Station (ISS). The STS-110 mission prepared the ISS for future spacewalks by installing and outfitting the S0 (S-zero) truss and the Mobile Transporter. The 43-foot-long S0 Truss, weighing in at 27,000 pounds, was the first of 9 segments that will make up the Station's external framework that will eventually stretch 356 feet (109 meters), or approximately the length of a football field. This central truss segment also includes a flatcar called the Mobile Transporter and rails that will become the first 'space railroad,' which will allow the Station's robotic arm to travel up and down the finished truss for future assembly and maintenance. The completed truss structure will hold solar arrays and radiators to provide power and cooling for additional international research laboratories from Japan and Europe that will be attached to the Station. Milestones of the STS-110 mission included the first time the ISS robotic arm was used to maneuver spacewalkers around the Station and marked the first time all spacewalks were based out of the Station's Quest Airlock. It was also the first Shuttle to use three Block II Main Engines. The Space Shuttle Orbiter Atlantis, STS-110 mission, was launched April 8, 2002 and returned to Earth April 19, 2002.

  5. 41. Ground level photograph of two floors of skeleton complete ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Ground level photograph of two floors of skeleton complete with 3rd and 4th floors being started,upper floors of county bldg visible - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  6. Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical Nosing, First Floor Stringer Profile, Second Floor Stringer Profile - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Treasurer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  7. Prism Window for Optical Alignment

    NASA Technical Reports Server (NTRS)

    Tang, Hong

    2008-01-01

    A prism window has been devised for use, with an autocollimator, in aligning optical components that are (1) required to be oriented parallel to each other and/or at a specified angle of incidence with respect to a common optical path and (2) mounted at different positions along the common optical path. The prism window can also be used to align a single optical component at a specified angle of incidence. Prism windows could be generally useful for orienting optical components in manufacture of optical instruments. "Prism window" denotes an application-specific unit comprising two beam-splitter windows that are bonded together at an angle chosen to obtain the specified angle of incidence.

  8. Surgical treatment of orbital floor fractures.

    PubMed

    Rankow, R M; Mignogna, F V

    1975-01-01

    Ninety patients with orbital floor fractures were treated by the Otolaryngology Service of the Columbia-Presbyterian Medical Center. Of these 90 patients, 58 were classified as coexisting and 32 as isolated. All fractures with clinical symptoms and demonstrable x-ray evidence should be explored. Despite negative findings by routine techniques, laminography may confirm fractures in all clinically suspicious cases. In this series, 100% of the patients explored had definitive fractures. A direct infraorbital approach adequately exposes the floor of the orbit. An effective and cosmetic subtarsal incision was utilized. Implants were employed when the floor could not be anatomically reapproximated or the periorbita was destroyed. PMID:1119982

  9. Tokamak physics experiment: Diagnostic windows study

    SciTech Connect

    Merrigan, M.; Wurden, G.A.

    1995-11-01

    We detail the study of diagnostic windows and window thermal stress remediation in the long-pulse, high-power Tokamak Physics Experiment (TPX) operation. The operating environment of the TPX diagnostic windows is reviewed, thermal loads on the windows estimated, and cooling requirements for the windows considered. Applicable window-cooling technology from other fields is reviewed and its application to the TPX windows considered. Methods for TPX window thermal conditioning are recommended, with some discussion of potential implementation problems provided. Recommendations for further research and development work to ensure performance of windows in the TPX system are presented.

  10. The Tasmantid Seamounts: A window into the structural inheritance of ocean floor fabric

    NASA Astrophysics Data System (ADS)

    Richards, F. D.; Kalnins, L. M.; Watts, A. B.; Cohen, B. E.; Beaman, R. J.

    2015-12-01

    The extinct Tasman Sea spreading centre, active from 84--53 Ma, is intersected at a number of locations by the Tasmantid Seamount Chain. The chain, which extends for over 2000 km off the east coast of Australia, progressively increases in age from south to north with ages ranging between 6 Ma and ˜50 Ma. While thick sediment (˜1 km) obscures much of the northern Tasman Sea basement, detailed morphological and geophysical analyses of the seamounts reveal a strong correlation between tectonic setting, seamount orientation, and volcanic structure, despite the ≥20 Ma offset between spreading cessation and initial seamount emplacement. Morphologically, structural inheritance is evidenced by the contrast between two volcanic styles: 1) the rugged, predominantly fissure-fed, fabrics characterizing seamounts emplaced at inside corners of spreading segment-transform intersections; and 2) the conical seamounts with summit craters and isolated dyke-fed flank cones that develop off-axis. Furthermore, volcanic fabrics align closely with the principal stress directions expected for a spreading ridge system in which strong mechanical coupling occurs across transform faults. This suggests that the lithosphere is dissected by numerous deep faults, allowing magma to be channelled away from the site of melting along pre-existing structural trends. The generally low effective elastic thickness, TeT_e, (≤15 km) and lack of a plate age-TeT_e relationship along the chain indicate that structural inheritance is also the major control on lithospheric strength near the extinct spreading centre. While the importance of structural inheritance in controlling magmatic behaviour is commonly acknowledged in continental settings, these results clearly demonstrate the need to also consider it in the oceanic realm.The extinct Tasman Sea spreading centre, active from 84--53 Ma, is intersected at a number of locations by the Tasmantid Seamount Chain. The chain, which extends for over 2000 km off the east coast of Australia, progressively increases in age from south to north with ages ranging between 6 Ma and ˜50 Ma. While thick sediment ( ˜1 km) obscures much of the northern Tasman Sea basement, detailed morphological and geophysical analyses of the seamounts reveal a strong correlation between tectonic setting, seamount orientation, and volcanic structure, despite the ≥20 Ma offset between spreading cessation and initial seamount emplacement. Morphologically, structural inheritance is evidenced by the contrast between two volcanic styles: 1) the rugged, predominantly fissure-fed, fabrics characterizing seamounts emplaced at inside corners of spreading segment-transform intersections; and 2) the conical seamounts with summit craters and isolated dyke-fed flank cones that develop off-axis. Furthermore, volcanic fabrics align closely with the principal stress directions expected for a spreading ridge system in which strong mechanical coupling occurs across transform faults. This suggests that the lithosphere is dissected by numerous deep faults, allowing magma to be channelled away from the site of melting along pre-existing structural trends. The generally low effective elastic thickness, Te, (≤15 km) and lack of a plate age-Te relationship along the chain indicate that structural inheritance is also the major control on lithospheric strength near the extinct spreading centre. While the importance of structural inheritance in controlling magmatic behaviour is commonly acknowledged in continental settings, these results clearly demonstrate the need to also consider it in the oceanic realm.

  11. Holography through optically active windows

    NASA Technical Reports Server (NTRS)

    Decker, A. J.

    1979-01-01

    By using two orthogonally polarized reference beams, holograms can be recorded through stressed windows and the reconstructed virtual image will show no stress pattern. As shown analytically, the stress-pattern-free hologram is recordable for any polarization state of the object illumination. Hence, the more efficient nondepolarizing diffuser can be used in performing holography through stressed windows if two reference beams are used. Results are presented for a pair of machined polysulfone windows intended for use in a holographic flow-visualization setup in a single-stage-compressor test rig.

  12. Generation of airborne listeria from floor drains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Listeria monocytogenes can colonize floor drains in poultry processing and further processing facilities remaining even after cleaning and disinfection. Therefore, during wash down, workers exercise caution to prevent escape and transfer of drain microflora to food contact surfaces. The objective ...

  13. Impact evaluation of composite floor sections

    NASA Technical Reports Server (NTRS)

    Boitnott, Richard L.; Fasanella, Edwin L.

    1989-01-01

    Graphite-epoxy floor sections representative of aircraft fuselage construction were statically and dynamically tested to evaluate their response to crash loadings. These floor sections were fabricated using a frame-stringer design typical of present aluminum aircraft without features to enhance crashworthiness. The floor sections were tested as part of a systematic research program developed to study the impact response of composite components of increasing complexity. The ultimate goal of the research program is to develop crashworthy design features for future composite aircraft. Initially, individual frames of six-foot diameter were tested both statically and dynamically. The frames were then used to construct built-up floor sections for dynamic tests at impact velocities of approximately 20 feet/sec to simulate survivable crash velocities. In addition, static tests were conducted to gain a better understanding of the failure mechanisms seen in the dynamic tests.

  14. Magnetic Resonance Imaging (MRI): Dynamic Pelvic Floor

    MedlinePlus

    ... a powerful magnetic field, radio waves and a computer to produce detailed pictures of the pelvic floor, ... powerful magnetic field, radio frequency pulses and a computer to produce detailed pictures of organs, soft tissues, ...

  15. Pelvic floor muscle rehabilitation using biofeedback.

    PubMed

    Newman, Diane K

    2014-01-01

    Pelvic floor muscle exercises have been recommended for urinary incontinence since first described by obstetrician gynecologist Dr. Arnold Kegel more than six decades ago. These exercises are performed to strengthen pelvic floor muscles, provide urethral support to prevent urine leakage, and suppress urgency. In clinical urology practice, expert clinicians also teach patients how to relax the muscle to improve bladder emptying and relieve pelvic pain caused by muscle spasm. When treating lower urinary tract symptoms, an exercise training program combined with biofeedback therapy has been recommended as first-line treatment. This article provides clinical application of pelvic floor muscle rehabilitation using biofeedback as a technique to enhance pelvic floor muscle training. PMID:25233622

  16. Performance evaluation of floor thermal storage system

    SciTech Connect

    Shinkai, Koichiro; Kasuya, Atsushi; Kato, Masahiro

    2000-07-01

    Environmental issues were seriously addressed when a new building was designed with district heating and cooling for the Osaka gas company. As a result, the building was officially recognized as Environmentally Conscious Building No. 1 by the Construction Ministry. In order to reduce cost by peak shaving, adoption of a floor thermal storage system was planned. This paper describes results regarding the peak shaving by floor thermal storage system in designing the air-conditioning system.

  17. Physical therapy for female pelvic floor disorders.

    PubMed

    Bourcier, A P

    1994-08-01

    Non-surgical, non-pharmacological treatment for female pelvic floor dysfunction is represented by rehabilitation in urogynecology. Since Kegel, in 1948, who proposed the concept of functional restoration of the perineal muscles, no specific term has actually been established. Owing to the number of specialists involved in the management of female pelvic floor disorders (such as gynecologists, urologists, coloproctologists, and neurologists) and the different types of health care providers concerned (such as physicians, physical therapists, nurses, and midwives), it is difficult to make the proper choice between 'physical therapy for pelvic floor', 'pelvic floor rehabilitation', 'pelvic muscle re-education', and 'pelvic floor training'. Because muscle re-education is under the control of physical therapists, we have chosen the term of physical therapy for female pelvic floor disorders. Muscle re-education has an important role in the primary treatment of lower urinary tract dysfunction. A multidisciplinary collaboration may be of particular interest, and a thorough evaluation is useful for a proper selection of patients. PMID:7742496

  18. ETRA, TRA642. ON BASEMENT FLOOR. IBEAM COLUMNS SUPPORTING CONSOLE FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETRA, TRA-642. ON BASEMENT FLOOR. I-BEAM COLUMNS SUPPORTING CONSOLE FLOOR HAVE BEEN SURROUNDED BY CONCRETE IN RECTANGULAR PILLARS. BASEMENT FLOOR IS BEING PREPARED FOR PLACEMENT OF CONCRETE. ABOVE CEILING IS CONSOLE FLOOR, IN WHICH CUT-OUT HAS PRESERVED SPACE FOR REACTOR AND ITS SHIELDING. CIRCULAR FORM IN REACTOR AREA IS CONCRETE FORMING. NOTE VERTICAL CONDUIT AT INTERVALS AROUND REACTOR PITS. INL NEGATIVE NO. 56-1237. Jack L. Anderson, Photographer, 4/17/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  19. Window Design for Manned Spaceflight

    NASA Astrophysics Data System (ADS)

    Lamoure, Richard; Kitchingman, Ian; Novo, Francisco; Sinnema, Gerben

    2012-07-01

    The Window Design for Manned Spacecraft (WDM) project being undertaken by Magna Parva Ltd, under contract with the European Space Agency, aims to develop and improve the current structural integrity verification program for manned spacecraft pressurised windows. A critical review of the existing requirements and current state-of-the-art in spacecraft window design, materials and verification practice is conducted. Possible areas for improvement are identified. An experimental test programme is designed to perform and assess mechanical characterisation methods at material level. Tests are intended to increase familiarity with material testing methods and investigate the effects of sample size, surface finish and load type on material characterisation. Novel methods and their applicability are investigated. Results of characterisation testing will be employed in the design and verification of a breadboard window.

  20. Window-closing safety system

    DOEpatents

    McEwan, T.E.

    1997-08-26

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only an inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window. 5 figs.

  1. Window-closing safety system

    DOEpatents

    McEwan, Thomas E.

    1997-01-01

    A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only and inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window.

  2. A window on urban sustainability

    SciTech Connect

    Stigt, Rien van; Driessen, Peter P.J.; Spit, Tejo J.M.

    2013-09-15

    Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of ‘decision windows’ can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: • Decision-making about sustainable urban development occurs in networks. • The concept of ‘decision windows’ was further elaborated. • Decision windows help understand how environmental interests enter decision-making. • Decision windows can, to some extent, be influenced.

  3. 76 FR 7098 - Dealer Floor Plan Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... ADMINISTRATION 13 CFR Parts 120 and 121 Dealer Floor Plan Pilot Program AGENCY: U.S. Small Business... Dealer Floor Plan Pilot Program to make available 7(a) loan guaranties for lines of credit that provide floor plan financing. This new Dealer Floor Plan Pilot Program was created in the Small Business...

  4. 2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO RIGHT, EDGE OF MILLING FLOOR, TABLE FLOOR, VANNING FLOOR, LOADING LEVEL, TAILINGS POND IN RIGHT BACKGROUND. VIEW IS LOOKING FROM THE NORTHWEST - Mountain King Gold Mine & Mill, 4.3 Air miles Northwest of Copperopolis, Copperopolis, Calaveras County, CA

  5. Total pelvic floor ultrasound for pelvic floor defaecatory dysfunction: a pictorial review.

    PubMed

    Hainsworth, Alison J; Solanki, Deepa; Schizas, Alexis M P; Williams, Andrew B

    2015-01-01

    Total pelvic floor ultrasound is used for the dynamic assessment of pelvic floor dysfunction and allows multicompartmental anatomical and functional assessment. Pelvic floor dysfunction includes defaecatory, urinary and sexual dysfunction, pelvic organ prolapse and pain. It is common, increasingly recognized and associated with increasing age and multiparity. Other options for assessment include defaecation proctography and defaecation MRI. Total pelvic floor ultrasound is a cheap, safe, imaging tool, which may be performed as a first-line investigation in outpatients. It allows dynamic assessment of the entire pelvic floor, essential for treatment planning for females who often have multiple diagnoses where treatment should address all aspects of dysfunction to yield optimal results. Transvaginal scanning using a rotating single crystal probe provides sagittal views of bladder neck support anteriorly. Posterior transvaginal ultrasound may reveal rectocoele, enterocoele or intussusception whilst bearing down. The vaginal probe is also used to acquire a 360° cross-sectional image to allow anatomical visualization of the pelvic floor and provides information regarding levator plate integrity and pelvic organ alignment. Dynamic transperineal ultrasound using a conventional curved array probe provides a global view of the anterior, middle and posterior compartments and may show cystocoele, enterocoele, sigmoidocoele or rectocoele. This pictorial review provides an atlas of normal and pathological images required for global pelvic floor assessment in females presenting with defaecatory dysfunction. Total pelvic floor ultrasound may be used with complementary endoanal ultrasound to assess the sphincter complex, but this is beyond the scope of this review. PMID:26388109

  6. 23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING WEST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  7. 24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING NORTH. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  8. ETR ELECTRICAL BUILDING, TRA648. FLOOR PLANS FOR FIRST FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR ELECTRICAL BUILDING, TRA-648. FLOOR PLANS FOR FIRST FLOOR AND BASEMENT. SECTIONS. KAISER ETR-5528-MTR-648-A-2, 12/1955. INL INDEX NO. 532-0648-00-486-101402, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  9. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... for future delivery or commodity option on or subject to the rules of that contract market. (2) Each... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Contract market requirement....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each...

  10. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... for future delivery or commodity option on or subject to the rules of that contract market. (2) Each... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Contract market requirement....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each...

  11. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... for future delivery or commodity option on or subject to the rules of that contract market. (2) Each... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Contract market requirement....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each...

  12. ETR, TRA642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTORGENERATOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTOR-GENERATOR SETS AND OTHER ELECTRICAL EQUIPMENT. PHILLIPS PETROLEUM COMPANY ETR-D-1781, 7/1960. INL INDEX NO. 532-0642-00-706-020384, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  13. The cleaning of ward floors and the bacteriological study of floor-cleaning machines

    PubMed Central

    Bate, J. G.

    1961-01-01

    Current trends in ward flooring materials and cleaning methods are considered from the point of view of the hospital bacteriologist. Methods employed in an investigation into the bacteriological safety of a number of floor-cleaning machines are described, and some considerations governing the choice of vacuum cleaners for ward use are discussed. Images PMID:13687726

  14. Curved Lobate Scarp on Crater Floor

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A broadly curved lobate scarp (running from left to right in the large crater to the right of center in this image) is restricted to the floor of a crater 85 kilometers in diameter. The rim of this crater and the rims of those north of it have been disrupted by the process which caused the hilly and lineated terrain. This process has not affected the smooth plains on their floors, indicating that the floor materials post date the formation of the craters. In this case, the scarp on the crater floor may be a flow front formed during emplacement of the floor material.

    This image (FDS 27379) was acquired during the spacecraft's first encounter with Mercury.

    The Mariner 10 mission, managed by the Jet Propulsion Laboratory for NASA's Office of Space Science, explored Venus in February 1974 on the way to three encounters with Mercury-in March and September 1974 and in March 1975. The spacecraft took more than 7,000 photos of Mercury, Venus, the Earth and the Moon.

    Image Credit: NASA/JPL/Northwestern University

  15. Extending the X Window System

    SciTech Connect

    Brenkosh, J.P.

    1993-12-23

    The X Window System was originally developed in 1984 at Massachusetts Institute of Technology. It provides client-server computing functionality and also facilitates the establishment of a distributed computing environment. Since its inception the X Window System has undergone many enhancements. Despite these enhancements there will always be a functionality desired in the standard released version of X that is not supported or commercially or academically available. The developers of the X Window System have designed it in such a way that it is possible to add functionality that is not included in the standard release. This is called an extension. Extensions are one method used to develop a customized version of the X Window System to support a specialized application. This report presents the mechanics of adding an extension and examines a particular extension that was developed at Sandia National Laboratories to support data compression in X Windows which was one aspect of the Desktop Video and Collaborative Engineering Laboratory Directed Research and Development (LDRD).

  16. Switchable Materials for Smart Windows.

    PubMed

    Wang, Yang; Runnerstrom, Evan L; Milliron, Delia J

    2016-06-01

    This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting. PMID:27023660

  17. 16 CFR 455.3 - Window form.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Window form. 455.3 Section 455.3 Commercial... Window form. (a) Form given to buyer. Give the buyer of a used vehicle sold by you the window form...) Incorporated into contract. The information on the final version of the window form is incorporated into...

  18. Windows and daylighting: A brighter outlook

    SciTech Connect

    Not Available

    1994-11-01

    This is an overview of energy efficient window glazing and framing technology. The topics of the report include: windows and energy use, a point of view; a challenging federal opportunity; DOE window research; advanced optical technologies such as spectrally selective glazing, switchable glazing, super windows with low-emissivity coatings and noble gas fills; and performance evaluation and design tools.

  19. A robust industrial accelerator window design

    NASA Astrophysics Data System (ADS)

    Schuetz, Marlin N.; Vroom, David A.

    1998-06-01

    An improved design for the thin metal foil window associated with high power industrial accelarators has been developed and tested. This design, which employs specifically shaped flanges, greatly reduce the stresses normally present on accelerators windows and has lead to longer window lifetime and a better means of window cooling.

  20. Music@Microsoft.Windows: Composing Ambience

    ERIC Educational Resources Information Center

    Rickert, Thomas

    2010-01-01

    It is well known, of course, that all Windows versions except for 3.1 have a brief (four to six second) piece of music indicating that Windows is booted and ready for use. While the music may indicate Windows has booted, it bears no immediately discernable relation to the various uses we might actually put Windows to--working, gaming,…

  1. Intrusive Magmatism and Explosive Volcanism on the Moon and Mercury: Insights from Floor-Fractured Craters

    NASA Astrophysics Data System (ADS)

    Jozwiak, L.; Head, J. W., III; Wilson, L.

    2015-12-01

    Lunar floor-fractured craters are a class of 170 craters characterized by shallow, deformed, and heavily fractured floors, with associated volcanic features commonly including deposits of mare material, pyroclastic deposits, and vents. The fracturing is interpreted to form in response to the stalling of a dike underneath the crater; resultant sill formation deforms the overlying crater floor. Morphologic measurements of these craters can be used to estimate sill dimensions, and from this we estimate the total volume of magma contained in all floor-fractured crater sills to be approximately 3 106 km3, 30% of the total lunar mare volume. Thus floor-fractured craters represent a unique window into intrusive magmatic processes on the Moon, including magma degassing and explosive volcanism. On the Moon, explosive volcanism is frequently associated with the degassing of floor-fractured crater intrusions; the morphologies associated with this process include small vents commonly located along fractures, and dark halos, which are low albedo deposits surrounding vents and are interpreted to be pyroclastic in origin. Other explosive volcanic morphologies include regional-scale pyroclastic deposits for which no vents have yet been identified, and large vent structures, such as Sulpicius Gallus. In contrast to the numerous floor-fractured craters on the Moon, there have been no conclusively identified floor-fractured craters on Mercury. Instead, Mercury exhibits a large number of what are interpreted to be explosive volcanic deposits, on the basis of the orange/red color of the inferred pyroclastic material identified in color images. These deposits are often much more areally extensive than their lunar counter parts, and surround a wide range of large pit and vent-like morphologies, themselves up to 10s of km in diameter. Using existing databases of these features, we have divided the spectrally identified volcanic deposits into 6 initial morphologic subclasses. Using the

  2. FAST CHOPPER DETECTOR HOUSE, TRA665. FIRST FLOOR, PLAN AND SECTION, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FAST CHOPPER DETECTOR HOUSE, TRA-665. FIRST FLOOR, PLAN AND SECTION, AS PROPOSED FOR MODIFICATION IN 1962. CONCRETE WALLS THREE FEET THICK. EXISTING WINDOWS IN MTR AND DETECTOR HOUSE WALLS WERE TO BE FILLED IN WITH HIGH-DENSITY BRICK. NOTE 20-METER MARK, WHERE THE FAST CHOPPER DETECTOR HAD BEEN LOCATED. F.C. TORKELSON 842-MTR-665-S-2, 4/1962. INL INDEX NO. 531-0665-60-851-150996, REV. 5. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. 11th Annual School Construction Report, 2006

    ERIC Educational Resources Information Center

    Abramson, Paul

    2006-01-01

    "School Planning & Management"'s annual survey of school construction statistics including projects completed during 2005, projected completions for 2006, and projects that will begin construction during 2006. In addition to national figures, statistics are broken down to provide detail for 12 regions of the nation, as well as the…

  4. 11th International Conference of Radiation Research

    SciTech Connect

    1999-07-18

    Topics discussed in the conference included the following: Radiation Physics, Radiation Chemistry and modelling--Radiation physics and dosimetry; Electron transfer in biological media; Radiation chemistry; Biophysical and biochemical modelling; Mechanisms of DNA damage; Assays of DNA damage; Energy deposition in micro volumes; Photo-effects; Special techniques and technologies; Oxidative damage. Molecular and cellular effects-- Photobiology; Cell cycle effects; DNA damage: Strand breaks; DNA damage: Bases; DNA damage Non-targeted; DNA damage: other; Chromosome aberrations: clonal; Chromosomal aberrations: non-clonal; Interactions: Heat/Radiation/Drugs; Biochemical effects; Protein expression; Gene induction; Co-operative effects; ``Bystander'' effects; Oxidative stress effects; Recovery from radiation damage. DNA damage and repair -- DNA repair genes; DNA repair deficient diseases; DNA repair enzymology; Epigenetic effects on repair; and Ataxia and ATM.

  5. The 11th Space Simulation Conference

    NASA Technical Reports Server (NTRS)

    Bond, A. C. (Editor)

    1980-01-01

    Subject areas range from specialized issues dealing with the space and entry environments to the environmental testing of systems and complete spacecraft of present-day vintage. Various papers consider: the test and development of several key systems of the orbiter vehicle; integrated tests of complete satellites; new and unique test facilities developed to meet the demanding requirements of high fidelity simulation of test environments; and contamination species, including the instrumentation for detection and measurement of such. Special topics include improved thermal protection methodologies and approaches, sophisticated sensor developments, and other related testing and development areas.

  6. Meteoric activities during the 11th century

    NASA Astrophysics Data System (ADS)

    Ahn, Sang-Hyeon

    2005-04-01

    We have analysed the meteor records in the chronicles that describe the era of the Song dynasty (AD 960-1279). The data are complementary to the record-vacant 10th century of the Koryo dynasty (AD 918-1392). The annual activity of sporadic meteors analysed shows a generic sinusoidal behaviour as in modern observations. In addition, we have also found that there are two prominent meteor showers, one in August and the other in November, appearing on the fluctuating sporadic meteors. The date of occurrence of the August shower indicates it to be the Perseids. By comparing the date of occurrence of the November shower with those of the Leonid showers of the Koryo dynasty, recent visual observations and the world-wide historical meteor storms, we conclude that the November shower is the Leonids. The regression rate of the Leonids is obtained to be days per century, which agrees with recent observations.

  7. The 11th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Mechanical devices and drives developed for aerospace applications are described. Satellite flywheels, magnetic bearings, a missile umbilical system, a cartridge firing device, and an oiler for satellite bearing lubrication are among the topics discussed.

  8. The 11th Aerospace Mechanisms Symposium

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Various mechanisms in aerospace engineering were presented at this conference. Specifications, design, and use of spacecraft and missile components are discussed, such as tail assemblies, radiometers, magnetormeters, pins, reaction wheels, ball bearings, actuators, mirrors, nutation dampers, airfoils, solar arrays, etc.

  9. An Economic Analysis of September 11th

    ERIC Educational Resources Information Center

    Langelett, George L.; Schug, Mark C.

    2004-01-01

    To many Western observers, the behavior of people in the Middle East is a mystery. The area is the scene of brutality and seemingly senseless acts of violence. Why has there been so much turmoil there for so long? This article contains a brief review of past events in the Middle East, which helps to establish the context of the problem. Sections…

  10. Part C Updates. 11th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2010-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the eleventh volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  11. A&M. TAN607 floor plans. Shows three floor levels of pool, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  12. The Benefits of Aluminum Windows.

    ERIC Educational Resources Information Center

    Goyal, R. C.

    2002-01-01

    Discusses benefits of aluminum windows for college construction and renovation projects, including that aluminum is the most successfully recycled material, that it meets architectural glass deflection standards, that it has positive thermal energy performance, and that it is a preferred exterior surface. (EV)

  13. Creating a Window Cleaner Company.

    ERIC Educational Resources Information Center

    Sarquis, A. M.; And Others

    1995-01-01

    Provides a description of a project used in the Cool Science and Technology Camps in which campers are presented with the challenge of developing and marketing their own brand of window cleaner. Topics such as chemistry, marketing, and cost analysis are intertwined as students prepare and plan their approach to product development. (DDR)

  14. Notes on UHV beryllium windows

    SciTech Connect

    Hartman, P.L.

    1986-10-01

    Techniques are described for making large ultrahigh vacuum beryllium windows for use in synchrotron radiation installations. Procedures are given for affecting both hard brazed seals and demountable seals involving either lead or copper gaskets. Brazed seals can be made to either stainless steel or copper. Possible alternative methods are suggested.

  15. Closing the Windows on Opportunity.

    ERIC Educational Resources Information Center

    Coombs, Norman

    1995-01-01

    The rapid adoption of graphic user interface (GUI), as indicated by Microsoft's Windows95 and the Internet's increased use of graphics, is threatening information technology opportunities for people with disabilities. Recent legislation requires that schools provide access to computers and information technology, and producers of Mosaic are…

  16. Nontraumatic orbital floor fracture after nose blowing.

    PubMed

    Sandhu, Ranjit S; Shah, Akash D

    2016-03-01

    A 40-year-old woman with no history of trauma or prior surgery presented to the emergency department with headache and left eye pain after nose blowing. Noncontrast maxillofacial computed tomography examination revealed an orbital floor fracture that ultimately required surgical repair. There are nontraumatic causes of orbital blowout fractures, and imaging should be obtained irrespective of trauma history. PMID:26973725

  17. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  18. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  19. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  20. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  1. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  2. Building Trades. Block III. Floor Framing.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This document contains three units of a course on floor framing to be used as part of a building trades program. Each unit consists, first, of an informational lesson, with complete lesson plan for the teacher's use. Included in each lesson plan are the lesson aim; lists of teaching aids, materials, references, and prerequisites for students;…

  3. Nontraumatic orbital floor fracture after nose blowing

    PubMed Central

    Sandhu, Ranjit S.; Shah, Akash D.

    2016-01-01

    A 40-year-old woman with no history of trauma or prior surgery presented to the emergency department with headache and left eye pain after nose blowing. Noncontrast maxillofacial computed tomography examination revealed an orbital floor fracture that ultimately required surgical repair. There are nontraumatic causes of orbital blowout fractures, and imaging should be obtained irrespective of trauma history. PMID:26973725

  4. Seeing Results in Flooring for Schools

    ERIC Educational Resources Information Center

    Simmons, Brian

    2011-01-01

    Operations staffs at education facilities of all sizes are tasked with selecting a hard floor cleaning program that is cost-effective, efficient and highly productive. With an increased focus on the sustainability of an environment, facility managers also must select a program that meets sustainability goals while maintaining a healthful, safe…

  5. Do I have an alluvial valley floor

    SciTech Connect

    Beach, G.G.

    1980-12-01

    The Surface Mining Control and Reclamation Act of 1977 establishes specific restrictions for coal mining on or adjacent to alluvial valley floors. Alluvial valley floors are lands in the Western United States where water availability for flood irrigation or subirrigation provides enhanced agricultural productivity on stream-laid deposits located in valley bottoms. Alluvial valley floors may consist of developed land or undeveloped rangeland. Developed land, if of sufficient size to be important to a farming operation, cannot be mined whereas undeveloped rangeland can be mined provided certain performance standards are met. Developed land is important to farming when the percentage loss of production by removal of the alluvial valley floor from a farm(s) total production exceeds the equation P = 3 + 0.0014X, where P is the maximum percentage loss of productivity considered to be a negligible impact to a Wyoming farming operation and X is the number of animal units of total farm production above 100. A threshold level of 10 percent is placed on P, above which such a loss is considered to be a significant loss to any size farming operation.

  6. Sea Floor off San Diego, California

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2009-01-01

    Ocean-floor image generated from multibeam-bathymetry data acquired by the U.S. Geological Survey (USGS); Woods Hole Oceanographic Institution; Scripps Institution of Oceanography; California State University, Monterey Bay; and Fugro Pelagos. To learn more, visit http://pubs.usgs.gov/sim/2007/2959/.

  7. Geodetic measurements at sea floor spreading centers

    NASA Technical Reports Server (NTRS)

    Spiess, F. N.

    1978-01-01

    A network of 8 or more precision transponder units mounted on the sea floor and interrogated periodically from an instrument package towed near bottom through the area to provide the necessary spatial averaging could provide a practical system for observing the pattern of buildup of strain at intermediate and fast spreading centers.

  8. Performance Support on the Shop Floor.

    ERIC Educational Resources Information Center

    Kasvi, Jyrki J. J.; Vartiainen, Matti

    2000-01-01

    Discussion of performance support on the shop floor highlights four support systems for assembly lines that incorporate personal computer workstations in local area networks and use multimedia documents. Considers new customer-focused production paradigms; organizational learning; knowledge development; and electronic performance support systems…

  9. Lead exposures from varnished floor refinishing.

    PubMed

    Schirmer, Joseph; Havlena, Jeff; Jacobs, David E; Dixon, Sherry; Ikens, Robert

    2012-01-01

    We evaluated the presence of lead in varnish and factors predicting lead exposure from floor refinishing and inexpensive dust suppression control methods. Lead in varnish, settled dust, and air were measured using XRF, laboratory analysis of scrape and wipe samples, and National Institute for Occupational Safety and Health (NIOSH) Method 7300, respectively, during refinishing (n = 35 homes). Data were analyzed using step-wise logistic regression. Compared with federal standards, no lead in varnish samples exceeded 1.0 mg/cm(2), but 52% exceeded 5000 ppm and 70% of settled dust samples after refinishing exceeded 40 μg/ft(2). Refinishing pre-1930 dwellings or stairs predicted high lead dust on floors. Laboratory analysis of lead in varnish was significantly correlated with airborne lead (r = 0.23, p = 0.014). Adding dust collection bags into drum sanders and HEPA vacuums to edgers and buffers reduced mean floor lead dust by 8293 μg Pb/ft(2) (p<0.05) on floors and reduced most airborne lead exposures to less than 50 μg/m(3). Refinishing varnished surfaces in older housing produces high but controllable lead exposures. PMID:22494405

  10. Entheseal changes and sexual division of labor in a North-African population: The case of the pre-Hispanic period of the Gran Canaria Island (11th-15th c. CE).

    PubMed

    Santana-Cabrera, J; Velasco-Vázquez, J; Rodríguez-Rodríguez, A

    2015-04-01

    The aim of this paper is to investigate the relationship between entheseal changes and sexual division of labor in the pre-Hispanic population of Gran Canaria Island (Spain). Ethnohistorical records from the period of contact between Europeans and the Canarian indigenous population provide rich information about the different activities performed by men and women. For this purpose, entheseal changes in a sample of 138 individuals (82 males and 56 females) buried in ten pre-Hispanic cemeteries (11th and 15th centuries cal. CE) were analyzed. Forty-one entheses located in the clavicle, humerus, ulna and radius were analyzed (fibrous and fibro-cartilaginous attachment sites). Entheses were graded using a visual and descriptive standard which summarized the entheseal changes. This method interprets the changes as a sign of robustness on a scale from low to high development and includes enthesopathies. The intra- and inter-observer error of this method was minimal. Sex differences in the degree of robustness, bilateral asymmetry, sexual dimorphism and principal components analyses were tested in this sample. The results indicate significant variance in the entheseal robustness between males and females. They also suggest the impact of certain biomechanical chains (pronosupination, shoulder rotation, etc.) in entheseal changes. These results contribute to an interdisciplinary approach to the study of the sexual division of labor in the pre-Hispanic society of Gran Canaria. PMID:25701082

  11. Opening and closing slab windows in congested subduction zones

    NASA Astrophysics Data System (ADS)

    Moresi, Louis

    2013-04-01

    Subduction zones often try to swallow buoyant material which is embedded in the oceanic lithosphere: plume material or hotspot residues, oceanic plateaux, and fragments of continental material. This often results in the formation of a slab window and it has been shown (Mason et al, 2010; Betts et al, 2012) that this window strongly influences the subsequent evolution of the slab and the advance/retreat rate of the trench. The buoyant material typically pushes the trench into a local state of advance, and the creation of the slab window allows the rest of the trench to retreat as the mantle behind the slab flows in through the window. This situation is inherently unstable: if the buoyancy anomaly is finite in size, then the retreating trench will soon move behind the anomaly and juxtapose negatively buoyant oceanic lithosphere with active subduction. This creates the potential to close the slab window and, in doing so, transfer the buoyant material to the over-riding plate. Models show that this closure of the window initially occurs through a lateral rollback process followed by a catastrophic re-initiation of subduction behind the colliding buoyant anomaly. This rollback leaves a characteristic, tightly rolled remnant in the mantle and significant rotation in the over-riding plate and the newly-docked block. The over-riding plate is thrown into extension perpendicular to the original orientation of the trench. This same situation applies at the late-stages of a closing ocean due to the passive margin geometry and the presence of debris collected from the closing ocean floor and it seems likely that these models can also be applied to the complicated geometry of subduction in such environments. Mason, W. G.; Moresi, L.; Betts, P. G. & Miller, M. S. Three-dimensional numerical models of the influence of a buoyant oceanic plateau on subduction zones Tectonophysics, 2010, 483, 71-79 P. Betts, W. Mason, L. Moresi, The influence of mantle plumes on subduction zone

  12. Removable Window System for Space Vehicles

    NASA Technical Reports Server (NTRS)

    Grady, James P. (Inventor)

    2015-01-01

    A window system for a platform comprising a window pane, a retention frame, and a biasing system. The window pane may be configured to contact a sealing system. The retention frame may be configured to contact the sealing system and hold the window pane against the support frame. The biasing system may be configured to bias the retention frame toward the support frame while the support frame and the retention frame are in a configuration that holds the window pane. Removal of the biasing system may cause the retention frame and the window pane to be removable.

  13. Measured winter performance of storm windows

    SciTech Connect

    Klems, Joseph H.

    2002-08-23

    Direct comparison measurements were made between various prime/storm window combinations and a well-weatherstripped, single-hung replacement window with a low-E selective glazing. Measurements were made using an accurate outdoor calorimetric facility with the windows facing north. The doublehung prime window was made intentionally leaky. Nevertheless, heat flows due to air infiltration were found to be small, and performance of the prime/storm combinations was approximately what would be expected from calculations that neglect air infiltration. Prime/low-E storm window combinations performed very similarly to the replacement window. Interestingly, solar heat gain was not negligible, even in north-facing orientation.

  14. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), FIRST FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), FIRST FLOOR SHOWING SAMPLE CORRIDORS AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL FACILITIES LAB, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051979. ALTERNATE ID NUMBER CPP-E-1979. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  15. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), SECOND FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), SECOND FLOOR SHOWING PROCESS MAKEUP AREA AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING COLD LAB, DECONTAMINATION ROOM, MULTICURIE CELL ROOM, AND OFFICES. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051980. ALTERNATE ID NUMBER CPP-E-1980. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  16. 8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, MOSAIC TILE FLOOR, AS SEEN FROM VISITORS GALLERY, 1989. - Skagit Power Development, Diablo Powerhouse, On Skagit River, 6.1 miles upstream from Newhalem, Newhalem, Whatcom County, WA

  17. CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ATTIC FLOOR SUPPORT COLUMNS AND BEAMS, LOOKING WEST. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  18. 50. Ground floor, looking northwest at former location of ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. Ground floor, looking northwest at former location of ground floor (bottom) level of milk room - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  19. 3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 DEGREES SOUTHEAST, SHOWING RAISED FLOOR OF CENTRAL AISLE. - Hudson-Cippa-Wolf Ranch, Milk Barn, Sorento Road, Sacramento, Sacramento County, CA

  20. 20. View of second floor to the Cherry Hill lettuce ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. View of second floor to the Cherry Hill lettuce shed looking at floor area - Richmond Hill Plantation, Cherry Hill Lettuce Shed, East of Richmond Hill on Ford Neck Road, Richmond Hill, Bryan County, GA

  1. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  2. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  3. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  4. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  5. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  6. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  7. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  8. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  9. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  10. Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground Floor Plan, Section A-A - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  11. 27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF BRONZE SEAL IN FLOOR (4' x 5' negative; 8' x 10' print) - U.S. Department of the Interior, Eighteenth & C Streets Northwest, Washington, District of Columbia, DC

  12. 79. DETAIL, MOSAIC FLOOR IN HALL 355 AT ENTRANCE TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    79. DETAIL, MOSAIC FLOOR IN HALL 355 AT ENTRANCE TO REGENTS' ROOM, THIRD FLOOR - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  13. 3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO SECOND FLOOR - Penn School Historic District, Benezet House, 1 mile South of Frogmore, Route 37, St Helena Island, Frogmore, Beaufort County, SC

  14. 5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE OVEN AT LEFT. All construction original except wood flooring, plumbing and electricity. - Ralph Izard House, Kitchen Building, 110 Broad Street, Charleston, Charleston County, SC

  15. View of double floor boards with mortises cross beams, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of double floor boards with mortises cross beams, showing spikes and flooring nails (Lower board layer exposed) - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  16. 32. Coffee bean sluiceway on ground floor showing chute bringing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. Coffee bean sluiceway on ground floor showing chute bringing beans from first floor hopper. HAER PR, 6-MAGU, 1B-17 - Hacienda Buena Vista, PR Route 10 (Ponce to Arecibo), Magueyes, Ponce Municipio, PR

  17. 18. 1925 Main Factory building, interior, second floor, view looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. 1925 Main Factory building, interior, second floor, view looking northeast at opening in the floor for dropping warp rolls - North Star Woolen Mill, 109 Portland Avenue South, Minneapolis, Hennepin County, MN

  18. 15. SECOND FLOOR, SOUTHWEST ROOM (HALL CHAMBER), SOUTH WALL WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. SECOND FLOOR, SOUTHWEST ROOM (HALL CHAMBER), SOUTH WALL WITH STAIRCASE TO ATTIC AND STAIRWELL FROM FIRST FLOOR - John Richardson House, 15 Race Street, Richardson Park, Wilmington, New Castle County, DE

  19. 33. Third floor, looking north, elevator and central stair to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. Third floor, looking north, elevator and central stair to the right (original ice manufacturing floor) - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  20. 11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH WALLS, SHOWING TWO TIERS OF COLUMNS WITH SECOND FLOOR REMOVED - Boston Beer Company, 225-249 West Second Street, South Boston, Suffolk County, MA

  1. 5. Light tower, stairs to second floor, looking northeast from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Light tower, stairs to second floor, looking northeast from first floor - Little River Light Station, East end of Little River Island, at mouth of Little River & entrance to Cutler Harbor, Cutler, Washington County, ME

  2. Detail of first floor of loading dock showing composition tile ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of first floor of loading dock showing composition tile over wood floor/basement ceiling - Southern Pacific Railroad Depot, Railroad Terminal Post Office & Express Building, Fifth & I Streets, Sacramento, Sacramento County, CA

  3. An anomalous case of an indirect orbital floor fracture.

    PubMed

    Nicolotti, Matteo; Poglio, Giuseppe; Grivetto, Fabrizio; Benech, Arnaldo

    2014-09-01

    Fractures of the orbital floor are common in facial trauma. Those that comprise only the orbital floor are called indirect fractures or pure internal orbital floor fractures. We present the case of an indirect fracture of the orbital floor after direct trauma to the back of the head caused by a bicycle accident. To the best of our knowledge this is the first time that this mechanism for such a fracture has been reported. PMID:24742591

  4. Windows in the Milky Way

    NASA Technical Reports Server (NTRS)

    Waller, William H.; Tacconi-Garman, Lowell Evan; Boulanger, Francois; Okumura, Koryo

    1991-01-01

    The objectives were twofold: (1) to study the IRAS emission levels in the vicinity of Baade's Window and in other optically transparent regions near the Galactic Center; and (2) to study the IRAS emission levels along sightlines in the Milky Way that exhibit very little CO emission. Tests were attempted to see whether the optically transparent 'windows' near the Galactic center can be identified (as FIR-weak regions) in the IRAS data base; and if so, whether the CO weak regions found elsewhere in the Milky Way represent similarly FIR weak and thus optically transparent sightlines through the Galaxy. The CO weak regions were also targeted in an effort to study the diffuse intercloud dust and its warming by the interstellar radiation field.

  5. Electrochromic Windows: Advanced Processing Technology

    SciTech Connect

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  6. 75 FR 70061 - Dealer Floor Plan Pilot Program Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-16

    ... ADMINISTRATION Dealer Floor Plan Pilot Program Meeting AGENCY: U.S. Small Business Administration (SBA). ACTION... agenda for a meeting regarding the Dealer Floor Plan Pilot Program established in the Small Business Jobs Act of 2010. The meeting will be open to the public. DATES: The Dealer Floor Plan Pilot...

  7. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  8. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  9. 36 CFR 1192.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Light Rail Vehicles and Systems § 1192.79 Floors, steps and thresholds. (a) Floor surfaces on aisles... accommodated shall be slip-resistant. (b) All thresholds and step edges shall have a band of color(s) running... floor, either light-on-dark or dark-on-light....

  10. 36 CFR 1192.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Light Rail Vehicles and Systems § 1192.79 Floors, steps and thresholds. (a) Floor surfaces on aisles... accommodated shall be slip-resistant. (b) All thresholds and step edges shall have a band of color(s) running... floor, either light-on-dark or dark-on-light....

  11. 36 CFR 1192.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Light Rail Vehicles and Systems § 1192.79 Floors, steps and thresholds. (a) Floor surfaces on aisles... accommodated shall be slip-resistant. (b) All thresholds and step edges shall have a band of color(s) running... floor, either light-on-dark or dark-on-light....

  12. What Do You Really Know About Floor Finishes & Strippers?

    ERIC Educational Resources Information Center

    Wirth, T. J.

    1972-01-01

    An independent testing laboratory reveals the results of comparative studies done on vinyl flooring and the question of to wax or not to wax'' and which waxes work best with what flooring; and provides six evaluation tips on floor strippers. (EA)

  13. 13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN FROM THE SECOND FLOOR TO THE GRINDING STONES, WITH GRAIN ELEVATORS IN BACKGROUND (NOTE OUTLINE ON THE FLOOR WHERE ROLLER MILLS WERE ORIGINALLY PLACED) - Schech's Mill, Beaver Creek State Park, La Crescent, Houston County, MN

  14. 17. Same floor as hot water vats looking towards the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Same floor as hot water vats looking towards the front of the building. These have to do with grain from upper floor judging from ceiling to floor progression. Note nice iron work. - Tivoli-Union Brewery, 1320-1348 Tenth Street, Denver, Denver County, CO

  15. RUGGED CERAMIC WINDOW FOR RF APPLICATIONS

    SciTech Connect

    MIKE NEUBAUER

    2012-11-01

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  16. Rugged Ceramic Window for RF Applications

    SciTech Connect

    Neubauer, Michael; Johnson, Rolland P.; Rimmer, Robert; Elliot, Tom; Stirbet, Mircea

    2009-05-04

    High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

  17. Footwear and flooring: charge generation in combination with a person as influenced by environmental moisture

    NASA Astrophysics Data System (ADS)

    Swenson, D. E.

    2015-10-01

    It is well known that a person walking on a floor will liberate electrostatic charge. The amount of charge that can be accumulated on a person by walking is dependent on many factors that are also well understood. Among these factors is the electrical resistance between a person and ground. The electrical resistance of footwear, other clothing, a person's skin resistance and the contact resistance between footwear and the floor impact the total resistance of the system. As important as measuring resistance may be as an evaluation method, it does not take into account triboelectric generation of charge. The recent revisions of ANSI/ESD S20.20[1] from the ESD Association and IEC61340-5-1[2] from IEC TC101 - Electrostatics, both include a dynamic walking test since experience in recent years has shown that resistance alone does not predict how a footwear and flooring system will actually perform. The USA group ASHRAE1, commissioned a study to evaluate electrostatic charge generation inside data centres as influenced by environmental moisture (relative and absolute humidity)[3][4]. The reason for this study is that past data centre operating guidelines have called for a very narrow range of temperature and humidity control, largely because of the anecdotal evidence that moderate to high RH impacts static electricity generation and accumulation. This results in a massive consumption of electricity to maintain a narrow window of temperature and environmental moisture. Broadening or eliminating humidity controls could result in a major saving of electricity and money.

  18. Beryllium window for an APS diagnostics beamline

    SciTech Connect

    Sheng, I.C.; Yang, B.X.; Sharma, Y.S.

    1997-09-01

    A beryllium (Be) window for an Advanced Photon Source (APS) diagnostics beamline has been designed and built. The window, which has a double concave axisymmetrical profile with a thickness of 0.5 mm at the center, receives 160 W/mm{sup 2} (7 GeV/100 mA stored beam) from an undulator beam. The window design as well as thermal and thermomechanical analyses, including thermal buckling of the Be window, are presented.

  19. Examination of the technical potential of near-infrared switching thermochromic windows for commercial building applications

    SciTech Connect

    Hoffmann, Sabine; Lee, Eleanor S.; Clavero, César

    2014-01-29

    Current thermochromic windows modulate solar transmission primarily within the visible range, resulting in reduced space-conditioning energy use but also reduced daylight, thereby increasing lighting energy use compared to conventional static, near-infrared selective, low-emittance windows. To better understand the energy savings potential of improved thermochromic devices, a hypothetical near-infrared switching thermochromic glazing was defined based on guidelines provided by the material science community. In this paper, EnergyPlus simulations were conducted on a prototypical large office building and a detailed analysis was performed showing the progression from switching characteristics to net window heat flow and perimeter zone loads and then to perimeter zone heating, ventilation, and air-conditioning (HVAC) and lighting energy use for a mixed hot/cold climate and a hot, humid climate in the US. When a relatively high daylight transmission is maintained when switched (Tsol=0.10–0.50 and Tvis=0.30–0.60) and if coupled with a low-e inboard glazing layer (e=0.04), the hypothetical thermochromic window with a low critical switching temperature range (14–20 °C) achieved reductions in total site annual energy use of 14.0–21.1 kW h/m2-floor-yr or 12–14% for moderate- to large-area windows (WWR≥0.30) in Chicago and 9.8–18.6 kW h/m2-floor-yr or 10–17% for WWR≥0.45 in Houston compared to an unshaded spectrally-selective, low-e window (window E1) in south-, east-, and west-facing perimeter zones. Finally, if this hypothetical thermochromic window can be offered at costs that are competitive to conventional low-e windows and meet esthetic requirements defined by the building industry and end users, then the technology is likely to be a viable energy-efficiency option for internal load dominated commercial buildings.

  20. Pelvic floor hypertonic disorders: identification and management.

    PubMed

    Butrick, Charles W

    2009-09-01

    Patients with hypertonic pelvic floor disorders can present with pelvic pain or dysfunction. Each of the various syndromes will be discussed including elimination disorders, bladder pain syndrome/interstitial cystitis (BPS/IC), vulvodynia, vaginismus, and chronic pelvic pain. The symptoms and objective findings on physical examination and various diagnostic studies will be reviewed. Therapeutic options including physical therapy, pharmacologic management, and trigger point injections, as well as botulinum toxin injections will be reviewed in detail. PMID:19932423

  1. Ocean floor mounting of wave energy converters

    SciTech Connect

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  2. Factory floor injury in a Lagos sawmill.

    PubMed

    Bode, C O; Giwa, S O; Oke, D A

    2001-01-01

    We retrospectively reviewed injuries sustained in 36 consecutive accidents in a wood-processing factory and managed at a private hospital over a 2-year period in Lagos. The commonest injuries were lacerations by revolving saws, followed by crush injuries from entrapment by machines and from falling logs and planks. The upper limbs were involved in 24 (66%) of these accidents cases. Of 137 workers on the factory floor, the highest injury rate (64%) occurred among machine operators. While 80.6% of these injuries were simple ones treated by suturing and dressing, 7 (19.4%) were life-threatening enough to warrant hospitalisation and major surgery, with 6 sustaining a mean permanent disability of 7.1 +/- 6%. Although factory-floor injuries constituted only 6.5% of 553 hospital attendance recorded within the period from the company, they were responsible for 44.2% of total medical expenditure by the company within the same period. Non-use of protective gears and disregard for safety procedures were noted in most of the accidents. The in-house first-aid program was adjudged as life-saving in the few major cases managed. We concluded that while many factory-floor injuries in wood-processing factories may be minor hand injuries, provision and strict observance of safety protocols as well as an active first-aid program are invaluable to minimise morbidity, cost and loss of productive man-hours in wood processing factories. PMID:11885883

  3. Floor of Lake Tahoe, California and Nevada

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2011-01-01

    Lake-floor depths shown by color, from light tan (shallowest) to blue (deepest). Arrows on map (C) show orientations of perspective views. A, view toward McKinney Bay over blocks tumbled onto the lake floor by a massive landslide 10s to 100s of thousands of years ago; dark triangular block near center is approximately 1.5 km (0.9 mi) across and 120 m (390 ft) high. B, view toward South Lake Tahoe and Emerald Bay (on right) over sediment waves as much as 10 m (30 ft) high, created by sediment flowing down the south margin of the lake. Slopes appear twice as steep as they are. Lake-floor imagery from U.S. Geological Survey (USGS) multibeam bathymetric data and U.S. Army Corps of Engineers bathymetric lidar data. Land imagery generated by overlaying USGS digital orthophoto quadrangles (DOQs) on USGS digital elevation models (DEMs). All data available at http://tahoe.usgs.gov/.

  4. Basaltic injections into floored silicic magma chambers

    NASA Astrophysics Data System (ADS)

    Wiebe, R. A.

    Recent studies have provided compelling evidence that many large accumulations of silicic volcanic rocks erupted from long-lasting, floored chambers of silicic magma that were repeatedly injected by basaltic magma. These basaltic infusions are commonly thought to play an important role in the evolution of the silicic systems: they have been proposed as a cause for explosive silicic eruptions [Sparks and Sigurdsson, 1977], compositional variation in ash-flow sheets [Smith, 1979], mafic magmatic inclusions in silicic volcanic rocks [Bacon, 1986], and mixing of mafic and silicic magmas [Anderson, 1976; Eichelberger, 1978]. If, as seems likely, floored silicic magma chambers have frequently been invaded by basalt, then plutonic bodies should provide records of these events. Although plutonic evidence for mixing and commingling of mafic and silicic magmas has been recognized for many years, it has been established only recently that some intrusive complex originated through multiple basaltic injections into floored chambers of silicic magma [e.g., Wiebe, 1974; Michael, 1991; Chapman and Rhodes, 1992].

  5. Space station proximity operations and window design

    NASA Technical Reports Server (NTRS)

    Haines, Richard F.

    1988-01-01

    On-orbit proximity operations (PROX-OPS) consist of all extravehicular activity (EVA) within 1 km of the space station. Because of the potentially large variety of PROX-OPS, very careful planning for space station windows is called for and must consider a great many human factors. The following topics are discussed: (1) basic window design philosophy and assumptions; (2) the concept of the local horizontal - local vertical on-orbit; (3) window linear dimensions; (4) selected anthropomorphic considerations; (5) displays and controls relative to windows; and (6) full window assembly replacement.

  6. Purged window apparatus utilizing heated purge gas

    DOEpatents

    Ballard, Evan O.

    1984-01-01

    A purged window apparatus utilizing tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows, and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube. Use of this apparatus prevents backstreaming of gases under investigation which are flowing past the mouth of the mounting tube which would otherwise deposit on the windows. Lengthy spectroscopic investigations and analyses can thereby be performed without the necessity of interrupting the procedures in order to clean or replace contaminated windows.

  7. Rigid thin windows for vacuum applications

    DOEpatents

    Meyer, Glenn Allyn; Ciarlo, Dino R.; Myers, Booth Richard; Chen, Hao-Lin; Wakalopulos, George

    1999-01-01

    A thin window that stands off atmospheric pressure is fabricated using photolithographic and wet chemical etching techniques and comprises at least two layers: an etch stop layer and a protective barrier layer. The window structure also comprises a series of support ribs running the width of the window. The windows are typically made of boron-doped silicon and silicon nitride and are useful in instruments such as electron beam guns and x-ray detectors. In an electron beam gun, the window does not impede the electrons and has demonstrated outstanding gun performance and survivability during the gun tube manufacturing process.

  8. 112. Stage level floor structure. Generial view from downstage left, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    112. Stage level floor structure. Generial view from downstage left, facing northeast, showing structural supports for the stage floor after some of the flooring was removed. Openings in the stage floor could be made by rolling eight movable sections to the side and down under the fixed floor (see sheet 4 of 9, notes 1A and 1B). Once opened, another floor section of the same size as the opening could be raised to stage level by a hydraulic ram (type D1). The movable section in the foreground is in the retracted position, with its top surface below the flange of the beam supporting the fixed floor. Compare it to the height of the un-retracted section to the left (see sheet 6 of 9, notes 2A and 2B). - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  9. MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  10. Durable coatings for IR windows

    NASA Astrophysics Data System (ADS)

    Goldman, Lee M.; Jha, Santosh K.; Gunda, Nilesh; Cooke, Rick; Agarwal, Neeta; Sastri, Suri A.; Harker, Alan; Kirsch, Jim

    2005-05-01

    Durable coatings of silicon-carbon-oxy-nitride (a.k.a. SiCON) are being developed to protect high-speed missile windows from the environmental loads during flight. Originally developed at Rockwell Scientific Corporation (RSC) these coatings exhibited substantial promise, but were difficult to deposit. Under a DoD DARPA SBIR Phase I program, Surmet Corporation, working closely with RSC, is depositing these coatings using an innovative vacuum vapor deposition process. High rate of coating deposition and the ease of manipulating the process variables, make Surmet"s process suitable for the deposition of substantially thick films (up to 30 μm) with precisely controlled chemistry. Initial work has shown encouraging results, and the refinement of the coating and coating process is still underway. Coupons of SiN and SiCON coatings with varying thickness on a variety of substrates such as Si-wafer, ZnS and ALON were fabricated and used for the study. This paper will present and discuss the results of SiN and SiCON coatings deposition and characterization (physical, mechanical and optical properties) as a basis for evaluating their suitability for high speed missile windows application.

  11. Interferometer for Space Station Windows

    NASA Technical Reports Server (NTRS)

    Hall, Gregory

    2003-01-01

    Inspection of space station windows for micrometeorite damage would be a difficult task insitu using current inspection techniques. Commercially available optical profilometers and inspection systems are relatively large, about the size of a desktop computer tower, and require a stable platform to inspect the test object. Also, many devices currently available are designed for a laboratory or controlled environments requiring external computer control. This paper presents an approach using a highly developed optical interferometer to inspect the windows from inside the space station itself using a self- contained hand held device. The interferometer would be capable as a minimum of detecting damage as small as one ten thousands of an inch in diameter and depth while interrogating a relatively large area. The current developmental state of this device is still in the proof of concept stage. The background section of this paper will discuss the current state of the art of profilometers as well as the desired configuration of the self-contained, hand held device. Then, a discussion of the developments and findings that will allow the configuration change with suggested approaches appearing in the proof of concept section.

  12. Downsampling Photodetector Array with Windowing

    NASA Technical Reports Server (NTRS)

    Patawaran, Ferze D.; Farr, William H.; Nguyen, Danh H.; Quirk, Kevin J.; Sahasrabudhe, Adit

    2012-01-01

    In a photon counting detector array, each pixel in the array produces an electrical pulse when an incident photon on that pixel is detected. Detection and demodulation of an optical communication signal that modulated the intensity of the optical signal requires counting the number of photon arrivals over a given interval. As the size of photon counting photodetector arrays increases, parallel processing of all the pixels exceeds the resources available in current application-specific integrated circuit (ASIC) and gate array (GA) technology; the desire for a high fill factor in avalanche photodiode (APD) detector arrays also precludes this. Through the use of downsampling and windowing portions of the detector array, the processing is distributed between the ASIC and GA. This allows demodulation of the optical communication signal incident on a large photon counting detector array, as well as providing architecture amenable to algorithmic changes. The detector array readout ASIC functions as a parallel-to-serial converter, serializing the photodetector array output for subsequent processing. Additional downsampling functionality for each pixel is added to this ASIC. Due to the large number of pixels in the array, the readout time of the entire photodetector is greater than the time between photon arrivals; therefore, a downsampling pre-processing step is done in order to increase the time allowed for the readout to occur. Each pixel drives a small counter that is incremented at every detected photon arrival or, equivalently, the charge in a storage capacitor is incremented. At the end of a user-configurable counting period (calculated independently from the ASIC), the counters are sampled and cleared. This downsampled photon count information is then sent one counter word at a time to the GA. For a large array, processing even the downsampled pixel counts exceeds the capabilities of the GA. Windowing of the array, whereby several subsets of pixels are designated

  13. Buffing, burnishing, and stripping of vinyl asbestos floor tile

    SciTech Connect

    Hollett, B.A.; Edwards, A.; Clark, P.J.

    1995-10-01

    Studies were conducted to evaluate airborne asbestos concentrations during the three principal types of preventative maintenance (low-speed spray-buffing, ultra high-speed burnishing, and wet-stripping) used on asbestos-containing floor tiles. These were done under pre-existing and prepared levels of floor care maintenance. Airborne asbestos concentrations were measured before and during each floor care procedure to determine the magnitude of the increase in airborne asbestos levels during each procedure. Airborne total fiber concentrations were also measured for comparison with the Occupational Safety and Health Administration`s (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cm{sup 3}. Low-speed spray-buffing and wet-stripping were evaluated on pre-existing floor conditions and three levels of prepared floor care conditions (poor, medium, and good). Ultra high-speed burnishing and wet-stripping were evaluated on two levels of prepared floor care conditions (poor and good). Floor care conditions were defined in consultation with the Chemical Specialty Manufacturers Association and other representatives of floor-care chemical manufacturers. Controlled studies were conducted in an unoccupied building at the decommissioned Chanute Air Force Base in Rantoul, Illinois, with the cooperation of the U.S. Air Force. The building offered approximately 8600 ft{sup 2} of open floor space tiled with 9-inch by 9-inch resilient floor tile containing approximately 5% chrysotile asbestos.

  14. Deflection of Resilient Materials for Reduction of Floor Impact Sound

    PubMed Central

    Lee, Jung-Yoon; Kim, Jong-Mun

    2014-01-01

    Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor. PMID:25574491

  15. Deflection of resilient materials for reduction of floor impact sound.

    PubMed

    Lee, Jung-Yoon; Kim, Jong-Mun

    2014-01-01

    Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor. PMID:25574491

  16. Venus - Multi-Floor Irregular Crater

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This Magellan image shows an irregular crater of approximately 14- kilometer (8.7-mile) mean diameter. The crater is actually a cluster of four separate craters that are in rim contact. The noncircular rims and multiple, hummocky floors are probably the result of the breakup and dispersion of an incoming meteoroid during passage through the dense Venusian atmosphere. After breaking up, the meteoroid fragments impacted nearly simultaneously, creating the crater cluster. The area shown is 40 kilometers (25 miles) in width and 76 kilometers (47 miles) in length, it is centered at -21.4 degrees latitude, 335.2 degrees longitude in the northern Lavinia Region of Venus.

  17. Physical activity and the pelvic floor.

    PubMed

    Nygaard, Ingrid E; Shaw, Janet M

    2016-02-01

    Pelvic floor disorders are common, with 1 in 4 US women reporting moderate to severe symptoms of urinary incontinence, pelvic organ prolapse, or fecal incontinence. Given the high societal burden of these disorders, identifying potentially modifiable risk factors is crucial. Physical activity is one such potentially modifiable risk factor; the large number of girls and women participating in sport and strenuous training regimens increases the need to understand associated risks and benefits of these exposures. The aim of this review was to summarize studies reporting the association between physical activity and pelvic floor disorders. Most studies are cross-sectional and most include small numbers of participants. The primary findings of this review include that urinary incontinence during exercise is common and is more prevalent in women during high-impact sports. Mild to moderate physical activity, such as brisk walking, decreases both the odds of having and the risk of developing urinary incontinence. In older women, mild to moderate activity also decreases the odds of having fecal incontinence; however, young women participating in high-intensity activity are more likely to report anal incontinence than less active women. Scant data suggest that in middle-aged women, lifetime physical activity increases the odds of stress urinary incontinence slightly and does not increase the odds of pelvic organ prolapse. Women undergoing surgery for pelvic organ prolapse are more likely to report a history of heavy work than controls; however, women recruited from the community with pelvic organ prolapse on examination report similar lifetime levels of strenuous activity as women without this examination finding. Data are insufficient to determine whether strenuous activity while young predisposes to pelvic floor disorders later in life. The existing literature suggests that most physical activity does not harm the pelvic floor and does provide numerous health benefits for

  18. Challenger Center's Window on the Universe

    NASA Astrophysics Data System (ADS)

    Livengood, T. A.; Goldstein, J. J.; Smith, S.; Bobrowsky, M.; Radnofsky, M.; Perelmuter, J.-M.; Jaggar, L.

    2001-11-01

    Challenger Center for Space Science Education's Window on the Universe program aims to create a network of under-served communities across the nation dedicated to sustained science, math, and technology education. Window communities presently include Broken Arrow, OK; Muncie, IN; Moscow, ID; Nogales, AZ; Tuskegee, AL; Marquette, MI; Altamont, KS; Washington, D.C.; and other emerging sites. Window uses themes of human space flight and the space sciences as interdisciplinary means to inspire entire communities. Practicing scientists and engineers engaged in these disciplines are invited to volunteer to become a part of these communities for a week, each visitor reaching roughly 2000 K-12 students through individual classroom visits and Family Science Night events during an intense Window on the Universe Week. In the same Window Week, Challenger Center scientists and educators present a workshop for local educators to provide training in the use of a K-12 educational module built around a particular space science and exploration theme. Window communities follow a 3-year development: Year 1, join the network, experience Window Week presented by Challenger Center and visiting researchers; Year 2, same as Year 1 plus workshop on partnering with local organizations to develop sources of visiting researchers and to enhance connections with local resources; Year 3 and subsequent, the community stages its own Window Week, with Challenger Center providing new education modules and training workshops for "master educators" from the Window community, after which the master educators return home to conduct training workshops of their own. Challenger Center remains a resource and clearinghouse for Window communities to acquire experience, technical information, and opportunities for distance collaboration with other Window communities. Window on the Universe is dedicated to assessing degree of success vs. failure in each program component and as a whole, using pre- and post

  19. Internet impact felt on plant floor

    SciTech Connect

    Mikles, L.

    1997-06-01

    While the Internet has gone from relative obscurity to being included in Microsoft Word`s spell checker in about four years. Its true power has yet to be realized. The Internet acts today as a low-cost, simple communication vehicle for one-to-one or many-to-many relationships through e-mail and the World Wide Web (WWW). Its future power lies with terms like {open_quotes}distributed computing,{close_quotes} {open_quotes}object orientation,{close_quotes} and {open_quotes}network computers.{close_quotes} While pushing the factory onto the information superhighway might not make the most sense today, taking advantage of the tools and approaches developed for the Internet to create an internal Internet, or intranet, may be key. Implemented properly, an Internet approach will deliver exciting opportunities to the plant floor to increase flexibility, speed up information flow, and improve decision making. While the Internet offers tremendous power through global connectivity, the communication security and reliability risks are still too great for connecting plant-floor operations without expensive firewall configurations. The tools developed for using the Internet, on the other hand, offer tremendous opportunity for secure internal operations until the security issues can be worked out. 4 figs.

  20. Venus - Multiple-Floored, Irregular Impact Crater

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Magellan imaged this multiple-floored, irregular impact crater at latitude 16.4 degrees north, longitude 352.1 degrees east, during orbits 481 and 482 on 27 September 1990. This crater, about 9.2 kilometers in maximum diameter, was formed on what appears to be a slightly fractured, radar-dark (smooth) plain. The abundant, low viscosity flows associated with this cratering event have, however, filled local, fault-controlled troughs (called graben). These shallow graben are well portrayed on this Magellan image but would be unrecognizable but for their coincidental infilling by the radar-bright crater flows. This fortuitous enhancement by the crater flows of fault structures that are below the resolution of the Magellan synthetic aperture radar is providing the Magellan Science Team with valuable geologic information. The flow deposits from the craters are thought to consist primarily of shock melted rock and fragmented debris resulting from the nearly simultaneous impacts of two projectile fragments into the hot (800 degrees Fahrenheit) surface rocks of Venus. The presence of the various floors of this irregular crater is interpreted to be the result of crushing, fragmentation, and eventual aerodynamic dispersion of a single entry projectile during passage through the dense Venusian atmosphere.

  1. Hybrid window layer for photovoltaic cells

    SciTech Connect

    Deng, Xunming; Liao, Xianbo; Du, Wenhui

    2011-02-01

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  2. Hybrid window layer for photovoltaic cells

    SciTech Connect

    Deng, Xunming; Liao, Xianbo; Du, Wenhui

    2011-10-04

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  3. Hybrid window layer for photovoltaic cells

    DOEpatents

    Deng, Xunming

    2010-02-23

    A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

  4. Lithography process window analysis with calibrated model

    NASA Astrophysics Data System (ADS)

    Zhou, Wenzhan; Yu, Jin; Lo, James; Liu, Johnson

    2004-05-01

    As critical-dimension shrink below 0.13 μm, the SPC (Statistical Process Control) based on CD (Critical Dimension) control in lithography process becomes more difficult. Increasing requirements of a shrinking process window have called on the need for more accurate decision of process window center. However in practical fabrication, we found that systematic error introduced by metrology and/or resist process can significantly impact the process window analysis result. Especially, when the simple polynomial functions are used to fit the lithographic data from focus exposure matrix (FEM), the model will fit these systematic errors rather than filter them out. This will definitely impact the process window analysis and determination of the best process condition. In this paper, we proposed to use a calibrated first principle model to do process window analysis. With this method, the systematic metrology error can be filtered out efficiently and give a more reasonable window analysis result.

  5. Laser sealed vacuum insulation window

    DOEpatents

    Benson, David K.; Tracy, C. Edwin

    1987-01-01

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the glass panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  6. Laser sealed vacuum insulating window

    DOEpatents

    Benson, D.K.; Tracy, C.E.

    1985-08-19

    A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the galss panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

  7. Window Observational Rack Facility (WORF)

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Developed by Boeing, at the Marshall Space Flight Center (MSFC) Space Station Manufacturing building, the Window Observational Rack Facility (WORF) will help Space Station crews take some of the best photographs ever snapped from an orbiting spacecraft by eliminating glare and allowing researchers to control their cameras and other equipment from the ground. The WORF is designed to make the best possible use of the high-quality research window in the Space Station's U.S. Destiny laboratory module. Engineers at the MSFC proposed a derivative of the EXPRESS (Expedite the Processing of Experiments to the Space Station) Rack already used on the Space Station and were given the go-ahead. The EXPRESS rack can hold a wide variety of experiments and provide them with power, communications, data, cooling, fluids, and other utilities - all the things that Earth-observing experiment instruments would need. WORF will supply payloads with power, data, cooling, video downlink, and stable, standardized interfaces for mounting imaging instruments. Similar to specialized orbital observatories, the interior of the rack is sealed against light and coated with a special low-reflectant black paint, so payloads will be able to observe low-light-level subjects such as the faint glow of auroras. Cameras and remote sensing instruments in the WORF can be preprogrammed, controlled from the ground, or operated by a Station crewmember by using a flexible shroud designed to cinch tightly around the crewmember's waist. The WORF is scheduled to be launched aboard the STS-114 Space Shuttle mission in the year 2003.

  8. Front elevation, building for a laying out floor and drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Front elevation, building for a laying out floor and drawing room, Johnson Company, Johnstown, Pa, March 7, 1893, H.E.F., scale 1/8 = 1 foot. (Photograph of architect's drawing of the drawing rooms and laying out floor building, compay drawing no. 14423, held at the Johnstown Corporation General Office, Johnstown, Pennsylvania) - Johnson Steel Street Rail Company, Drawing Room & Laying-Out Floor Building, 525 Central Avenue, Johnstown, Cambria County, PA

  9. Delayed Periorbital Abscess after Silicone Implant to Orbital Floor Fracture.

    PubMed

    Dedhia, Raj; Tollefson, Travis T

    2016-06-01

    There is a lack of consensus regarding preferred implant materials for orbital floor fracture reconstruction, leading to surgeon- and institution-dependent preferences. A variety of implants are used for orbital floor fracture reconstruction, each with their own complication profile. Knowledge of different implant materials is critical to identifying complications when they present. We report a delayed periorbital abscess 5 years after orbital floor reconstruction using a silicone implant. PMID:27162580

  10. 48. STAIRWAY TO THE SECOND FLOOR, SOUTH END OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. STAIRWAY TO THE SECOND FLOOR, SOUTH END OF THE EAST WING. STAIRWAY AND WOODEN DECK ADDED IN 1976. WOODEN DECK FILLS A CIRCULAR HOLE LEFT IN THE FLOOR FOR THE POSSIBLE ADDITION OF A THIRD BISCUIT AND KILN. A SMALLER HOLE WAS LEFT IN THE WEST WING FLOOR TO ALLOW CONSTRUCTION OF AN ADDITIONAL GLAZE KILN. NEITHER EXTRA KILN WAS BUILT. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  11. Contoured insulation window for evacuated solar collector

    SciTech Connect

    Coppola, F. T.; Lentz, W. P.; Vandewoestine, R. V.

    1980-02-05

    An insulating contoured window is provided for use with an enclosed chamber such as an evacuated flat plate solar heat collector with the contoured solar window being of minimum thickness and supported solely about its peripheral edge portions. The window is contoured in both its longitudinal and transverse directions, such that in its longitudinal direction the window is composed of a plurality of sinusoidal corrugations whereas in its transverse direction the peaks of such corrugations are contoured in the form of paraboloids so that the structure may withstand the forces generated thereon by the atmosphere.

  12. Manufacturing of diamond windows for synchrotron radiation

    SciTech Connect

    Schildkamp, W.; Nikitina, L.

    2012-09-15

    A new diamond window construction is presented and explicit manufacturing details are given. This window will increase the power dissipation by about a factor of 4 over present day state of the art windows to absorb 600 W of power. This power will be generated by in-vacuum undulators with the storage ring ALBA operating at a design current of 400 mA. Extensive finite element (FE) calculations are included to predict the windows behavior accompanied by explanations for the chosen boundary conditions. A simple linear model was used to cross-check the FE calculations.

  13. 23. VIEW SECOND FLOOR, ELEVATOR SHAFT SAFETY NET ACCESS, NORTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. VIEW SECOND FLOOR, ELEVATOR SHAFT SAFETY NET ACCESS, NORTHWEST ELEVATOR LOADING DOOR. - Bates Manufacturing Company, Storehouse, Northeast corner of Chestnut Street & Hines Alley, Lewiston, Androscoggin County, ME

  14. 24. VIEW FIRST FLOOR ELEVATOR PLATFORM, LOOKING DOWN THE MAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. VIEW FIRST FLOOR ELEVATOR PLATFORM, LOOKING DOWN THE MAIN HALLWAY, LOOKING NORTHWEST - Bates Manufacturing Company, Storehouse, Northeast corner of Chestnut Street & Hines Alley, Lewiston, Androscoggin County, ME

  15. 22. VIEW SECOND FLOOR, TOP VIEW OF ELEVATOR WITH WINCHING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW SECOND FLOOR, TOP VIEW OF ELEVATOR WITH WINCHING MECHANISM, LOOKING NORTHWEST - Bates Manufacturing Company, Storehouse, Northeast corner of Chestnut Street & Hines Alley, Lewiston, Androscoggin County, ME

  16. 21. VIEW SECOND FLOOR, ELEVATOR SHAFT, TOP ELEVATOR SUPPORT, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW SECOND FLOOR, ELEVATOR SHAFT, TOP ELEVATOR SUPPORT, LOOKING NORTHWEST - Bates Manufacturing Company, Storehouse, Northeast corner of Chestnut Street & Hines Alley, Lewiston, Androscoggin County, ME

  17. 20. VIEW OF ELEVATOR SHAFT FROM FIRST FLOOR TO SKYLIGHT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. VIEW OF ELEVATOR SHAFT FROM FIRST FLOOR TO SKYLIGHT, LOOKING SKYWARD, NORTH - Bates Manufacturing Company, Storehouse, Northeast corner of Chestnut Street & Hines Alley, Lewiston, Androscoggin County, ME

  18. 10. VIEW, LOOKING NORTHEAST, OF MAIN LOBBY, FIRST FLOOR, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW, LOOKING NORTHEAST, OF MAIN LOBBY, FIRST FLOOR, SHOWING PORTALS TO NEW LOBBY - Pennsylvania Railroad, Harrisburg Station & Trainshed, Market & South Fourth Streets, Harrisburg, Dauphin County, PA

  19. Perspective view of second floor landing from northeast National ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Perspective view of second floor landing from northeast - National Home for Disabled Volunteer Soldiers, Danville Branch, Directors' House, 1900 and 2000 East Main Street , Danville, Vermilion County, IL

  20. 63. INTERIOR VIEW, DETAIL, HEAD HOUSE, GROUND FLOOR, BARLOW ROOM, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. INTERIOR VIEW, DETAIL, HEAD HOUSE, GROUND FLOOR, BARLOW ROOM, CARVED LINOLEUM WALL PANEL FLANKING THE ENTRANCE, LOOKING WEST - Timberline Lodge, Timberline Trail, Government Camp, Clackamas County, OR