Science.gov

Sample records for 135mm lens note

  1. Building 1204, oblique view to west, 135 mm lens. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 1204, oblique view to west, 135 mm lens. - Travis Air Force Base, Squadron Operations & Readiness Crew Facility, W Street, Armed Forces Special Weapons Project Q Area, Fairfield, Solano County, CA

  2. Building 909, oblique view to southeast, 135 mm lens. Building ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 909, oblique view to southeast, 135 mm lens. Building 908 at extreme right for context. - Travis Air Force Base, Handling Crew Building, North of W Street, Armed Forces Special Weapons Project Q Area, Fairfield, Solano County, CA

  3. Building 931, oblique view to southeast, 135 mm lens. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 931, oblique view to southeast, 135 mm lens. - Travis Air Force Base, Central Battery Charging Building, North of W Street, Armed Forces Special Weapons Project Q Area, Fairfield, Solano County, CA

  4. Building 904, oblique view to northwest, 135 mm lens ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 904, oblique view to northwest, 135 mm lens - Travis Air Force Base, Base Spares Warehouse No. 1, Dixon Avenue & W Street, Armed Forces Special Weapons Project Q Area, Fairfield, Solano County, CA

  5. Building 904, oblique view to southeast, 135 mm lens. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 904, oblique view to southeast, 135 mm lens. - Travis Air Force Base, Base Spares Warehouse No. 1, Dixon Avenue & W Street, Armed Forces Special Weapons Project Q Area, Fairfield, Solano County, CA

  6. 7. Detail, east portal of Tunnel 34/Snowshed 33, 135mm lens. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Detail, east portal of Tunnel 34/Snowshed 33, 135mm lens. Tall signal mast necessary in order to be seen above winter snows. - Central Pacific Transcontinental Railroad, Tunnel No. 41, Milepost 193.3, Donner, Placer County, CA

  7. 3. West portal of Tunnel 18, view to northeast, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. West portal of Tunnel 18, view to northeast, 135mm lens. Note the use of concrete face and wingwalls, with dressed stone voussoirs, wingwall coping, parapet with stone belt course and coping, and coursed stone masonry slope protection flanking the portal. - Southern Pacific Railroad Natron Cutoff, Tunnel No. 17, Milepost 408, Dorris, Siskiyou County, CA

  8. 3. East portal of Tunnel 34, view to southsouthwest, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. East portal of Tunnel 34, view to south-southwest, 135mm lens with electronic flash fill. Note the shift, in these later tunnels east of Colfax, to concrete portal faces with granite masonry voussoirs and coping. - Central Pacific Transcontinental Railroad, Tunnel No. 34, Milepost 145.4, Colfax, Placer County, CA

  9. 2. West portal of Snowshed 29, view to east, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Snowshed 29, view to east, 135mm lens. Note the heavy timber frame, with battered posts to carry the tremendous snow loads of winter. - Central Pacific Transcontinental Railroad, Tunnel No. 41, Milepost 193.3, Donner, Placer County, CA

  10. 1. West portal of Tunnel 36, view to northeast, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. West portal of Tunnel 36, view to northeast, 135mm lens. Note the notched wingwalls that originally held timber posts of the original timber snowsheds, miles of which once enclosed and protected the railroad from the ravages of Sierra winters. Note also that these tunnels, built in the 1920s, have dispensed with any use of stone masonry, and instead have all-concrete portals. - Central Pacific Transcontinental Railroad, Tunnel No. 36, Milepost 176.92, Yuba Pass, Nevada County, CA

  11. 2. West portal of Tunnel 37 view to eastsoutheast, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 37 view to east-southeast, 135mm lens. Note the notched wingwalls that would have originally held timber posts of the original timber snowsheds, miles of which once enclosed and protected the railroad from the ravages of Sierra winters. Note also that these tunnels, built in the 1920s, have dispensed with any use of stone masonry, and instead have all-concrete portals, though this tunnel retains the use of rubble granite slab slope protection flanking the portal. - Central Pacific Transcontinental Railroad, Tunnel No. 37, Milepost 177.79, Yuba Pass, Nevada County, CA

  12. 2. West portal of Tunnel 39, view to east, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 39, view to east, 135mm lens with electronic flash fill. Note the notched wingwalls that support steel posts of entrance snowshed; these would have originally held timber posts of the original timber snowsheds, miles of which once enclosed and protected the railroad from the ravages of Sierra winters. Note also that these tunnels, built in the 1920s, have dispensed with any use of stone masonry, and instead have all-concrete portals. - Central Pacific Transcontinental Railroad, Tunnel No. 39, Milepost 180.95, Cisco, Placer County, CA

  13. 2. West portal of Tunnel 35, view to east, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 35, view to east, 135mm lens with electronic flash fill. Note the notched wingwalls that support steel posts of entrance snowshed; these would have originally held timber posts of the original timber snowsheds, miles of which once enclosed and protected the railroad from the ravages of Sierra winters. Note also that these tunnels, built in the 1920s, have dispensed with any use of stone masonry, and instead have all-concrete portals. - Central Pacific Transcontinental Railroad, Tunnel No. 35, Milepost 176.62, Yuba Pass, Nevada County, CA

  14. 2. West portal of Tunnel 38, view to east, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 38, view to east, 135mm lens. Note the notched wingwalls that support steel posts of entrance snowshed; these would have originally held timber posts of the original timber snowsheds, miles of which once enclosed and protected the railroad from the ravages of Sierra winters. Note also that these tunnels, built in the 1920s, have dispensed with any use of stone masonry, and instead have all-concrete portals. - Central Pacific Transcontinental Railroad, Tunnel No. 38, Milepost 180.58, Cisco, Placer County, CA

  15. 5. East portal of Tunnel 26, view to southwest, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. East portal of Tunnel 26, view to southwest, 135mm lens. Tunnel 25 (HAER CA-201) is visible in the distance. - Central Pacific Transcontinental Railroad, Tunnel No. 26, Milepost 133.29, Applegate, Placer County, CA

  16. 5. East portal of Tunnel 28, view to southsouthwest, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. East portal of Tunnel 28, view to south-southwest, 135mm lens. Shed above portal appears to have housed machinery connected with a counterweighted curtain mechanism used to help dissipate smoke from this 3,209-foot tunnel during the days of steam locomotive use - Central Pacific Transcontinental Railroad, Tunnel No. 28, Milepost 134.75, Applegate, Placer County, CA

  17. 5. East portal of Tunnel 18, view to westsouthwest, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. East portal of Tunnel 18, view to west-southwest, 135mm lens. The train exiting the tunnel, though northbound toward Portland, is considered an eastbound train on the Southern Pacific (see explanation above). - Southern Pacific Railroad Natron Cutoff, Tunnel No. 18, Milepost 410, Dorris, Siskiyou County, CA

  18. 2. West portal of Tunnel 1, view to northeast, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 1, view to northeast, 135mm lens. Like the new tunnels built during this period, Tunnel 1 received a new concrete portal face with granite masonry voussoirs and coping. - Central Pacific Transcontinental Railroad, Tunnel No. 1, Milepost 164.34, Blue Canyon, Placer County, CA

  19. 1. East portal of Tunnel 3, view to west, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. East portal of Tunnel 3, view to west, 135mm lens. This tunnel was photographed to provide context, because even though somewhat enlarged, it illustrates the nature of the unlined hard rock tunnels typical of the original Central Pacific construction in 1868. - Central Pacific Transcontinental Railroad, Tunnel No. 3, Milepost 180.65, Cisco, Placer County, CA

  20. 3. West portal of Tunnel 23, view to north, 135mm ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. West portal of Tunnel 23, view to north, 135mm lens. Concrete foundation in right foreground was from 'telltale,' a simple post-and-beam frame that spanned the tracks with lengths of rope suspended from the beam. In the days when brakemen were required to be on, and walk along, the tops of freight cars to set brakes, the 'telltale' ropes would strike the unwary to warn of the tunnel ahead, allowing them to lie flat and avoid being struck by the tunnel portal. - Central Pacific Transcontinental Railroad, Tunnel No. 23, Milepost 132.69, Applegate, Placer County, CA

  1. 26. Detail, typical section of roof; note condition of slates, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Detail, typical section of roof; note condition of slates, missing slates replaced by sheet metal inserts, heavy moss growth on lower edges of slates and completely filling channel of remaining gutter section; view to southwest from lift-bed truck, 135mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

  2. High performances of very long (13.5mm) tapered laser emitting at 975 nm

    NASA Astrophysics Data System (ADS)

    Resneau, P.; Garcia, M.; Lecomte, M.; Robert, Y.; Vinet, E.; Parillaud, O.; Krakowski, M.; Boiko, D. L.

    2016-03-01

    Mode-locked semiconductor laser technology is a promising technology candidate considered by European Space Agency (ESA) for optical metrology systems and other space applications in the context of high-precision optical metrology, in particular for High Accuracy Absolute Long Distance Measurement. For these applications, we have realised a multi-section monolithic-cavity tapered laser diode with a record cavity length of 13.5 mm. The laser operates at 975 nm wavelength. It is designed for the emission of ultra-short optical pulses (<1 ps) at a repetition rate of 3 GHz with an average optical power of 600 mW. It is based on a MOVPE grown laser structure with Aluminium free active region enabling high optical gain, low internal losses and low series resistance. The first results obtained under CW pumping of such centimetre-long laser at 20 °C heatsink temperature show the lasing threshold current as low as 1.27 A and the differential external efficiency as high as 0.55 W/A.

  3. 10. Southeast end; view to northwest, 65mm lens. Note evidence ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Southeast end; view to northwest, 65mm lens. Note evidence of extreme building failure caused by adjacent railroad cut, which necessitated building demolition. (Vignetting due to extreme use of camera swing necessitated by lack of space to position camera otherwise.) - Benicia Arsenal, Powder Magazine No. 5, Junction of Interstate Highways 680 & 780, Benicia, Solano County, CA

  4. Building 810, oblique view to eastsoutheast, 90mm lens. Note buttressed ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Building 810, oblique view to east-southeast, 90mm lens. Note buttressed end wall extensions into which main doors nest. - Travis Air Force Base, B-36 Hangar, Between Woodskill Avenue & Ellis, adjacent to Taxiway V & W, Fairfield, Solano County, CA

  5. Noted

    ERIC Educational Resources Information Center

    Nunberg, Geoffrey

    2013-01-01

    Considering how much attention people lavish on the technologies of writing--scroll, codex, print, screen--it's striking how little they pay to the technologies for digesting and regurgitating it. One way or another, there's no sector of the modern world that is not saturated with note-taking--the bureaucracy, the liberal professions, the…

  6. Note: A combined aerodynamic lens/ambient pressure x-ray photoelectron spectroscopy experiment for the on-stream investigation of aerosol surfaces

    SciTech Connect

    Mysak, Erin R.; Starr, David E.; Wilson, Kevin R.; Bluhm, Hendrik

    2010-01-15

    We discuss a new approach for the measurement of the surfaces of free aerosol particles with diameters from 50 to 1000 nm. Particles in this size range have significant influence on the heterogeneous chemistry in the atmosphere and affect human health. Interfacing an aerodynamic lens to an ambient pressure x-ray photoelectron spectrometer permits measurement of the surface chemical composition of unsupported aerosol particles in real time. We discuss the basic considerations for the design of such an instrument, its current limitations and potentials for improvement. Results from a proof-of-principle experiment on silicon oxide particles with average diameters of 270 nm are shown.

  7. 12. Detail, typical window with fireproof shutters open, northeast rear, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Detail, typical window with fireproof shutters open, northeast rear, view to southwest, 135mm lens. Note cracks evidencing structural failure. - Benicia Arsenal, Powder Magazine No. 5, Junction of Interstate Highways 680 & 780, Benicia, Solano County, CA

  8. 13. Detail, typical window with fireproof shutters closed, northeast rear, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Detail, typical window with fireproof shutters closed, northeast rear, view to southwest, 135mm lens. Note cracks evidencing structural failure. - Benicia Arsenal, Powder Magazine No. 5, Junction of Interstate Highways 680 & 780, Benicia, Solano County, CA

  9. Collection Mode Lens System

    DOEpatents

    Fletcher, Daniel A.; Kino, Gordon S.

    2002-11-05

    A lens system including a collection lens and a microlens spaced from the collection lens adjacent the region to be observed. The diameter of the observablel region depends substantially on the radius of the microlens.

  10. Converging or Diverging Lens?

    ERIC Educational Resources Information Center

    Branca, Mario

    2013-01-01

    Why does a lens magnify? Why does it shrink objects? Why does this happen? The activities that we propose here are useful in helping us to understand how lenses work, and they show that the same lens can have different magnification capabilities. A converging lens can also act as a diverging lens. (Contains 4 figures.)

  11. Contact lens in keratoconus

    PubMed Central

    Rathi, Varsha M; Mandathara, Preeji S; Dumpati, Srikanth

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL. PMID:23925325

  12. The Lens Capsule

    PubMed Central

    Danysh, Brian P.; Duncan, Melinda K.

    2009-01-01

    The lens capsule is a modified basement membrane that completely surrounds the ocular lens. It is known that this extracellular matrix is important for both the structure and biomechanics of the lens in addition to providing informational cues to maintain lens cell phenotype. This review covers the development and structure of the lens capsule, lens diseases associated with mutations in extracellular matrix genes and the role of the capsule in lens function including those proposed for visual accommodation, selective permeability to infectious agents, and cell signaling. PMID:18773892

  13. Restoring lens capsule integrity enhances lens regeneration in New Zealand albino rabbits and cats.

    PubMed

    Gwon, A; Gruber, L J; Mantras, C

    1993-11-01

    In studies conducted by numerous investigators for 150 years, lenses regenerated following endocapsular lens extraction in New Zealand albino rabbits have been irregular in shape, appearing primarily doughnut-shaped as a result of lack of lens growth at the site of the anterior capsulotomy and its adhesion to the posterior capsule. In the present study, we restored the lens capsule integrity by inserting a collagen patch at the time of surgery to seal the anterior capsulotomy and to improve the shape and structure of the regenerated lenses. We then filled the capsule bag with air to prevent adhesions between the anterior and posterior capsule and maintain capsule tautness and shape. Lens regeneration was first noted as early as one to two weeks. Regenerated lens filled approximately 50% of the capsule bag at two weeks and 100% by five weeks. Subsequent growth was in the anterior-posterior direction and measured by A-scan biometry. Lens thickness increased by 0.3 mm per month. The regenerated lenses were spherical with normal cortical structure and a nuclear opacity. In conclusion, restoration of lens capsular integrity with a collagen patch following endocapsular lens extraction enhanced the shape, structure, and growth rate of the regenerated lenses. In addition, lens regeneration was shown to occur in two cats.

  14. The Zoom Lens: A Case Study in Geometrical Optics.

    ERIC Educational Resources Information Center

    Cheville, Alan; Scepanovic, Misa

    2002-01-01

    Introduces a case study on a motion picture company considering the purchase of a newly developed zoom lens in which students act as the engineers designing the zoom lens based on the criteria of company's specifications. Focuses on geometrical optics. Includes teaching notes and classroom management strategies. (YDS)

  15. Apparatus Notes.

    ERIC Educational Resources Information Center

    Eaton, Bruce G., Ed.

    1980-01-01

    Presents four notes that report new equipment and techniques of interest to physics teachers. These notes deal with collosions of atoms in solids, determining the viscosity of a liquid, measuring the speed of sound and demonstrating Doppler effect. (HM)

  16. Physics Notes.

    ERIC Educational Resources Information Center

    School Science Review, 1980

    1980-01-01

    Presents nine physics notes for British secondary school teachers. Some of these notes are: (1) speed of sound in a steel rod; (2) physics extracts-part four (1978); and (3) a graphical approach to acceleration. (HM)

  17. Suicide notes.

    PubMed

    O'Donnell, I; Farmer, R; Catalan, J

    1993-07-01

    Detailed case reports of incidents of suicide and attempted suicide on the London Underground railway system between 1985 and 1989 were examined for the presence of suicide notes. The incidence of note-leaving was 15%. Notes provided little insight into the causes of suicide as subjectively perceived, or strategies for suicide prevention. PMID:8353698

  18. Contact Lens Care

    MedlinePlus

    ... For Consumers Consumer Information by Audience For Women Contact Lens Care Share Tweet Linkedin Pin it More ... 1088, www.fda.gov/medwatch Learn More about Contact Lens Care Other Tips on Contact Lenses Decorative ...

  19. Contact Lens Solution Toxicity

    MedlinePlus

    ... rash and rashes clinical tools newsletter | contact Share | Contact Lens Solution Toxicity Information for adults A A A This image shows a reaction to contact lens solution. The prominent blood vessels and redness ...

  20. Aberration design of zoom lens systems using thick lens modules.

    PubMed

    Zhang, Jinkai; Chen, Xiaobo; Xi, Juntong; Wu, Zhuoqi

    2014-12-20

    A systematic approach for the aberration design of a zoom lens system using a thick lens module is presented. Each component is treated as a thick lens module at the beginning of the design. A thick lens module refers to a thick lens component with a real lens structure, like lens materials, lens curvatures, lens thicknesses, and lens interval distances. All nine third-order aberrations of a thick lens component are considered during the design. The relationship of component aberrations in different zoom positions can be approximated from the aberration shift. After minimizing the aberrations of the zoom lens system, the nine third-order aberrations of every lens component can be determined. Then the thick lens structure of every lens component can be determined after optimization according to their first-order properties and third-order aberration targets. After a third optimization for minimum practical third-order aberrations of a zoom lens system, the aberration design using the thick lens module is complete, which provides a practical zoom lens system with thick lens structures. A double-sided telecentric zoom lens system is designed using the thick lens module in this paper, which shows that this method is practical for zoom lens design.

  1. Chemistry Notes.

    ERIC Educational Resources Information Center

    School Science Review, 1980

    1980-01-01

    Presents 12 chemistry notes for British secondary school teachers. Some of these notes are: (1) a simple device for testing pH-meters; (2) portable fume cupboard safety screen; and (3) Mass spectroscopy-analysis of a mass peak. (HM)

  2. Chemistry Notes.

    ERIC Educational Resources Information Center

    School Science Review, 1978

    1978-01-01

    Describes experiments, demonstrations, activities and ideas relating to various fields of chemistry to be used in chemistry courses of secondary schools. Three experiments concerning differential thermal analysis are among these notes presented. (HM)

  3. Blue Note

    ScienceCinema

    Murray Gibson

    2016-07-12

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  4. Blue Note

    SciTech Connect

    Murray Gibson

    2007-04-27

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  5. Paediatric intraocular lens implants: accuracy of lens power calculations.

    PubMed

    O'Gallagher, M K; Lagan, M A; Mulholland, C P; Parker, M; McGinnity, G; McLoone, E M

    2016-09-01

    PurposeThis study aims to evaluate the accuracy of lens prediction formulae on a paediatric population.MethodsA retrospective case-note review was undertaken of patients under 8 years old who underwent cataract surgery with primary lens implantation in a regional referral centre for paediatric ophthalmology, excluding those whose procedure was secondary to trauma. Biometric and refractive data were analysed for 43 eyes, including prediction errors (PE). Statistical measures used included mean absolute error (MAE), median absolute error (MedAE), Student's t-test and Lin's correlation coefficient.ResultsThe mean PE using the SRK-II formula was +0.96 D (range -2.47D to +2.41 D, SD 1.33 D, MAE 1.38 D, MedAE 1.55, n=15). The mean PE was smaller using SRK/T (-0.18 D, range -3.25 D to +3.95 D, SD 1.70 D, MAE 1.30 D, MedAE 1.24, n=27). We performed an analysis of the biometry data using four different formula (Hoffer Q, Holladay 1, SRK-II and SRK/T). Hoffer Q showed a smaller MedAE than other formulae but also a myopic bias.ConclusionOur clinical data suggest SRK/T was more accurate in predicting post-operative refraction in this cohort of paediatric patients undergoing cataract surgery. Hoffer Q may have improved accuracy further.

  6. Apparatus Notes.

    ERIC Educational Resources Information Center

    Eaton, Bruce G., Ed.

    1980-01-01

    This collection of notes describes (1) an optoelectronic apparatus for classroom demonstrations of mechanical laws, (2) a more efficient method for demonstrated nuclear chain reactions using electrically energized "traps" and ping-pong balls, and (3) an inexpensive demonstration for qualitative analysis of temperature-dependent resistance. (CS)

  7. Classroom Notes

    ERIC Educational Resources Information Center

    International Journal of Mathematical Education in Science and Technology, 2007

    2007-01-01

    In this issue's "Classroom Notes" section, the following papers are discussed: (1) "Constructing a line segment whose length is equal to the measure of a given angle" (W. Jacob and T. J. Osler); (2) "Generating functions for the powers of Fibonacci sequences" (D. Terrana and H. Chen); (3) "Evaluation of mean and variance integrals without…

  8. Biology Notes.

    ERIC Educational Resources Information Center

    School Science Review, 1984

    1984-01-01

    Presents information on the teaching of nutrition (including new information relating to many current O-level syllabi) and part 16 of a reading list for A- and S-level biology. Also includes a note on using earthworms as a source of material for teaching meiosis. (JN)

  9. Apparatus Notes.

    ERIC Educational Resources Information Center

    Eaton, Bruce G., Ed.

    1979-01-01

    Presents brief notes on new ideas, equipment, techniques, or materials of interest to teachers of physics. An apparatus that demonstrates the uniform acceleration of gravity, and a simple way to demonstrate nuclear blocking patterns of crystal lattices are among new ideas presented. (HM)

  10. Classroom Notes

    ERIC Educational Resources Information Center

    International Journal of Mathematical Education in Science and Technology, 2007

    2007-01-01

    In this issue's "Classroom Notes" section, the following papers are described: (1) "Sequences of Definite Integrals" by T. Dana-Picard; (2) "Structural Analysis of Pythagorean Monoids" by M.-Q Zhan and J. Tong; (3) "A Random Walk Phenomenon under an Interesting Stopping Rule" by S. Chakraborty; (4) "On Some Confidence Intervals for Estimating the…

  11. Contact lens hygiene compliance and lens case contamination: A review.

    PubMed

    Wu, Yvonne Tzu-Ying; Willcox, Mark; Zhu, Hua; Stapleton, Fiona

    2015-10-01

    A contaminated contact lens case can act as a reservoir for microorganisms that could potentially compromise contact lens wear and lead to sight threatening adverse events. The rate, level and profile of microbial contamination in lens cases, compliance and other risk factors associated with lens case contamination, and the challenges currently faced in this field are discussed. The rate of lens case contamination is commonly over 50%. Coagulase-negative Staphylococcus, Bacillus spp., Pseudomonas aeruginosa and Serratia marcescens are frequently recovered from lens cases. In addition, we provide suggestions regarding how to clean contact lens cases and improve lens wearers' compliance as well as future lens case design for reducing lens case contamination. This review highlights the challenges in reducing the level of microbial contamination which require an industry wide approach.

  12. Unitary lens semiconductor device

    DOEpatents

    Lear, K.L.

    1997-05-27

    A unitary lens semiconductor device and method are disclosed. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors. 9 figs.

  13. Unitary lens semiconductor device

    DOEpatents

    Lear, Kevin L.

    1997-01-01

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  14. Intraocular lens fabrication

    DOEpatents

    Salazar, Mike A.; Foreman, Larry R.

    1997-01-01

    This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

  15. Intraocular lens fabrication

    DOEpatents

    Salazar, M.A.; Foreman, L.R.

    1997-07-08

    This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

  16. Ultraviolet spectrograph lens

    SciTech Connect

    Brixner, B.; Winkler, M.A.

    1981-01-01

    A 700-mm f/4.7 spectrograph camera lens was designed for imaging spectral lines in the 200 to 400-nm region on a 120-mm flat image field. Lens elements of fused silica and crystalline calcium fluoride have so little secondary spectrum that raytracing calculations predict a monochromatic resolution limit of 30 lines/mm without refocusing in the 238- to 365-nm region. Light scattering at the polished calcium-fluoride surfaces is avoided by sandwiching the fluoride elements between fused silica and cementing with silicone fluid. The constructed lens makes good spectrograms.

  17. Ultraviolet-spectrograph lens

    SciTech Connect

    Brixner, B.; Winkler, M.A.

    1981-01-01

    A 700-mm f/4.7 spectrograph camera lens was designed for imaging spectral lines in the 200- to 400-nm region on a 120-mm flat image field. Lens elements of fused silica and crystal calcium fluoride give such good achromatization that raytracing calculations predict a resolution limit of 30 lines/mm without refocusing in the 238- to 365-nm region. Light scattering at the polished calcium-fluoride surfaces is avoided by sandwiching the fluoride elements between fused silica and cementing with silicone fluid. The constructed lens makes good spectrograms.

  18. Telescopic vision contact lens

    NASA Astrophysics Data System (ADS)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  19. Reflections From a Fresnel Lens

    ERIC Educational Resources Information Center

    Keeports, David

    2005-01-01

    Reflection of light by a convex Fresnel lens gives rise to two distinct images. A highly convex inverted real reflective image forms on the object side of the lens, while an upright virtual reflective image forms on the opposite side of the lens. I describe here a set of laser experiments performed upon a Fresnel lens. These experiments provide…

  20. 16. Detail, northeast facade, operator's bow window and tower; note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Detail, northeast facade, operator's bow window and tower; note condition of slates on tower skirt roof, missing section of gutter at left side of skirt roof, missing window panes; note also knee braces carried on masonry ancons; view to southwest, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

  1. Contact Lens Risks

    MedlinePlus

    ... Health and Consumer Devices Consumer Products Contact Lenses Contact Lens Risks Share Tweet Linkedin Pin it More ... redness blurred vision swelling pain Serious Hazards of Contact Lenses Symptoms of eye irritation can indicate a ...

  2. Lens auto-centering

    NASA Astrophysics Data System (ADS)

    Lamontagne, Frédéric; Desnoyers, Nichola; Doucet, Michel; Côté, Patrice; Gauvin, Jonny; Anctil, Geneviève; Tremblay, Mathieu

    2015-09-01

    In a typical optical system, optical elements usually need to be precisely positioned and aligned to perform the correct optical function. This positioning and alignment involves securing the optical element in a holder or mount. Proper centering of an optical element with respect to the holder is a delicate operation that generally requires tight manufacturing tolerances or active alignment, resulting in costly optical assemblies. To optimize optical performance and minimize manufacturing cost, there is a need for a lens mounting method that could relax manufacturing tolerance, reduce assembly time and provide high centering accuracy. This paper presents a patent pending lens mounting method developed at INO that can be compared to the drop-in technique for its simplicity while providing the level of accuracy close to that achievable with techniques using a centering machine (usually < 5 μm). This innovative auto-centering method is based on the use of geometrical relationship between the lens diameter, the lens radius of curvature and the thread angle of the retaining ring. The autocentering principle and centering test results performed on real optical assemblies are presented. In addition to the low assembly time, high centering accuracy, and environmental robustness, the INO auto-centering method has the advantage of relaxing lens and barrel bore diameter tolerances as well as lens wedge tolerances. The use of this novel lens mounting method significantly reduces manufacturing and assembly costs for high performance optical systems. Large volume productions would especially benefit from this advancement in precision lens mounting, potentially providing a drastic cost reduction.

  3. Teaching Notes

    NASA Astrophysics Data System (ADS)

    2001-05-01

    If you would like to contribute a teaching note for any of these sections please contact ped@iop.org. Contents: LET'S INVESTIGATE: Standing waves on strings MY WAY: Physics slips, trips and falls PHYSICS ON A SHOESTRING The McOhm: using fast food to explain resistance Eggs and a sheet STARTING OUT: After a nervous start, I'm flying ON THE MAP: Christ's Hospital CURIOSITY: The Levitron TECHNICAL TRIMMINGS: Brownian motion smoke cell LET'S INVESTIGATE

  4. Teaching Notes

    NASA Astrophysics Data System (ADS)

    2001-03-01

    If you would like to contribute a teaching note for any of these sections please contact ped@iop.org. Contents: PHYSICS ON A SHOESTRING: Demonstrating resolution Magnetic tea patterns LET'S INVESTIGATE: Conducting foam TECHNICAL TRIMMINGS: Polarimeter Old experiments on air-tracks gain new fans MY WAY: Newton's laws ON THE MAP: The International School of Lusaka CURIOSITY: Inflation theory PHYSICS ON A SHOESTRING

  5. Application note :

    SciTech Connect

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  6. Terahertz Artificial Dielectric Lens

    NASA Astrophysics Data System (ADS)

    Mendis, Rajind; Nagai, Masaya; Wang, Yiqiu; Karl, Nicholas; Mittleman, Daniel M.

    2016-03-01

    We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices.

  7. Terahertz Artificial Dielectric Lens.

    PubMed

    Mendis, Rajind; Nagai, Masaya; Wang, Yiqiu; Karl, Nicholas; Mittleman, Daniel M

    2016-01-01

    We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices. PMID:26973294

  8. Terahertz Artificial Dielectric Lens.

    PubMed

    Mendis, Rajind; Nagai, Masaya; Wang, Yiqiu; Karl, Nicholas; Mittleman, Daniel M

    2016-03-14

    We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices.

  9. Terahertz Artificial Dielectric Lens

    PubMed Central

    Mendis, Rajind; Nagai, Masaya; Wang, Yiqiu; Karl, Nicholas; Mittleman, Daniel M.

    2016-01-01

    We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices. PMID:26973294

  10. Teaching Notes

    NASA Astrophysics Data System (ADS)

    2001-07-01

    If you would like to contribute a teaching note for any of these sections please contact ped@iop.org Contents: LET'S INVESTIGATE: Bows and arrows STARTING OUT: A late start ON THE MAP: A South African school making a world of difference TECHNICAL TRIMMINGS: May the force be with you an easily constructed force sensor Modelling Ultrasound A-scanning with the Pico Technology ADC-200 Virtual Instrument PHYSICS ON A SHOESTRING: Sugar cube radioactivity models CURIOSITY: Euler's disk MY WAY: Why heavy things don't fall faster

  11. Free volume in contact lens polymers

    NASA Technical Reports Server (NTRS)

    Singh, Jag J.; Eftekhari, Abe; Upchurch, Billy T.; Burns, Karen S.

    1990-01-01

    We have measured the free volume and gas permeability in several contact lens specimens as part of a Space Commercialization Program. Free volume was measured using positron lifetime spectroscopy, while permeability for O2, N2, and CO2 gases was measured using mass spectrometry and polarography. It has been noted that permeability for all gases increases with the mean free volume cell size in the test samples. As might be expected, the specimens with the highest free volume fraction also exhibit the lowest Rockwell Hardness Number. An interesting corollary of this study is the finding that the presence of fluorine atoms in the lens chemical structure inhibits filling up of their free volume cells. This is expected to allow the lenses to breathe freely while in actual use.

  12. Tunable optofluidic birefringent lens.

    PubMed

    Wee, D; Hwang, S H; Song, Y S; Youn, J R

    2016-05-01

    An optofluidic birefringent lens is demonstrated using hydrodynamic liquid-liquid (L(2)) interfaces in a microchannel. The L(2) lens comprises a nematic liquid crystal (NLC) phase and an optically isotropic phase for the main stream and the surrounding sub-stream, respectively. When the optofluidic device is subjected to a sufficiently strong electric field perpendicular to the flow direction, NLCs are allowed to orient along the external field rather than the flow direction overcoming fluidic viscous stress. The characteristics of the optofluidic birefringence lens are investigated by experimental and numerical analyses. The difference between the refractive indices of the main stream and the sub-stream changes according to the polarization direction of incident light, which determines the optical behaviour of the lens. The incidence of s-polarized light leads to a short focal point, while p-polarized light has a relatively long focal distance from the same L(2) interface. The curvatures and focal lengths of the lens are successfully evaluated by a hydrodynamic theory of NLCs and a simple ray-tracing model. PMID:27035877

  13. Metamaterial lens design

    NASA Astrophysics Data System (ADS)

    Shepard, Ralph Hamilton, III

    Developments in nanotechnology and material science have produced optical materials with astonishing properties. Theory and experimentation have demonstrated that, among other properties, the law of refraction is reversed at an interface between a naturally occurring material and these so-called metamaterials. As the technology advances metamaterials have the potential to vastly impact the field of optical science. In this study we provide a foundation for future work in the area of geometric optics and lens design with metamaterials. The concept of negative refraction is extended to derive a comprehensive set of first-order imaging principles as well as an exhaustive aberration theory to 4th order. Results demonstrate congruence with the classical theory; however, negative refraction introduces a host of novel properties. In terms of aberration theory, metamaterials present the lens designer with increased flexibility. A singlet can be bent to produce either positive or negative spherical aberration (regardless of its focal length), its contribution to coma can become independent of its conjugate factor, and its field curvature takes on the opposite sign of its focal power. This is shown to be advantageous in some designs such as a finite conjugate relay lens; however, in a wider field of view landscape lens we demonstrate a metamaterial's aberration properties may be detrimental. This study presents the first comprehensive investigation of metamaterial lenses using industry standard lens design software. A formal design study evaluates the performance of doublet and triplet lenses operating at F/5 with a 100 mm focal length, a 20° half field of view, and specific geometric constraints. Computer aided optimization and performance evaluation provide experimental controls to remove designer-induced bias from the results. Positive-index lenses provide benchmarks for comparison to metamaterial systems subjected to identical design constraints. We find that

  14. Microoptical compound lens

    DOEpatents

    Sweatt, William C.; Gill, David D.

    2007-10-23

    An apposition microoptical compound lens comprises a plurality of lenslets arrayed around a segment of a hollow, three-dimensional optical shell. The lenslets collect light from an object and focus the light rays onto the concentric, curved front surface of a coherent fiber bundle. The fiber bundle transports the light rays to a planar detector, forming a plurality of sub-images that can be reconstructed as a full image. The microoptical compound lens can have a small size (millimeters), wide field of view (up to 180.degree.), and adequate resolution for object recognition and tracking.

  15. 2. West portal of Tunnel 18, oblique view to northnortheast, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 18, oblique view to north-northeast, 135mm lens. Note the use of concrete face and wingwalls, with dressed stone voussoirs, wingwall coping, parapet with stone belt course and coping, and coursed stone masonry slope protection flanking the portal. - Southern Pacific Railroad Natron Cutoff, Tunnel No. 18, Milepost 410, Dorris, Siskiyou County, CA

  16. 13. Interior detail, sealed doorway between the original Warehouse Room ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Interior detail, sealed doorway between the original Warehouse Room and Offices, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to northeast (135mm lens). Note that the original height of the doorway has been reduced with a supplemental segmental arch header and infill. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

  17. 4. East portal of Tunnel 22, view to the eastsoutheast, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. East portal of Tunnel 22, view to the east-southeast, 135mm lens with electronic flash fill. Note the depth of water within the tunnel, a sympton of the spring-laden slope above the tunnel that led to its eventual abandonment. - Southern Pacific Railroad Natron Cutoff, Tunnel 23, Milepost 584.5, Westfir, Lane County, OR

  18. A Tribute to Len Barton

    ERIC Educational Resources Information Center

    Tomlinson, Sally

    2010-01-01

    This article constitutes a short personal tribute to Len Barton in honour of his work and our collegial relationship going back over 30 years. It covers how Len saw his intellectual project of providing critical sociological and political perspectives on special education, disability and inclusion, and his own radical political perspectives. Len's…

  19. Thin Lens Ray Tracing.

    ERIC Educational Resources Information Center

    Gatland, Ian R.

    2002-01-01

    Proposes a ray tracing approach to thin lens analysis based on a vector form of Snell's law for paraxial rays as an alternative to the usual approach in introductory physics courses. The ray tracing approach accommodates skew rays and thus provides a complete analysis. (Author/KHR)

  20. The Lens of Chemistry

    ERIC Educational Resources Information Center

    Thalos, Mariam

    2013-01-01

    Chemistry possesses a distinctive theoretical lens--a distinctive set of theoretical concerns regarding the dynamics and transformations of a perplexing variety of organic and nonorganic substances--to which it must be faithful. Even if it is true that chemical facts bear a special (reductive) relationship to physical facts, nonetheless it will…

  1. Thermal Lens Microscope

    NASA Astrophysics Data System (ADS)

    Uchiyama, Kenji; Hibara, Akihide; Kimura, Hiroko; Sawada, Tsuguo; Kitamori, Takehiko

    2000-09-01

    We developed a novel laser microscope based on the thermal lens effect induced by a coaxial beam comprised of excitation and probe beams. The signal generation mechanism was confirmed to be an authentic thermal lens effect from the measurement of signal and phase dependences on optical configurations between the sample and the probe beam focus, and therefore, the thermal lens effect theory could be applied. Two-point spatial resolution was determined by the spot size of the excitation beam, not by the thermal diffusion length. Sensitivity was quite high, and the detection ability, evaluated using a submicron microparticle containing dye molecules, was 0.8 zmol/μm2, hence a distribution image of trace chemical species could be obtained quantitatively. In addition, analytes are not restricted to fluorescent species, therefore, the thermal lens microscope is a promising analytical microscope. A two-dimensional image of a histamine molecule distribution, which was produced in mast cells at the femtomole level in a human nasal mucous polyp, was obtained.

  2. Editorial Note

    NASA Astrophysics Data System (ADS)

    van der Meer, F.; Ommen Kloeke, E.

    2015-07-01

    With this editorial note we would like to update you on the performance of the International Journal of Applied Earth Observation and Geoinformation (JAG) and inform you about changes that have been made to the composition of the editorial team. Our Journal publishes original papers that apply earth observation data for the management of natural resources and the environment. Environmental issues include biodiversity, land degradation, industrial pollution and natural hazards such as earthquakes, floods and landslides. As such the scope is broad and ranges from conceptual and more fundamental work on earth observation and geospatial sciences to the more problem-solving type of work. When I took over the role of Editor-in-Chief in 2012, I together with the Publisher set myself the mission to position JAG in the top-3 of the remote sensing and GIS journals. To do so we strived at attracting high quality and high impact papers to the journal and to reduce the review turnover time to make JAG a more attractive medium for publications. What has been achieved? Have we reached our ambitions? We can say that: The submissions have increased over the years with over 23% for the last 12 months. Naturally not all may lead to more papers, but at least a portion of the additional submissions should lead to a growth in journal content and quality.

  3. Functional modular contact lens

    NASA Astrophysics Data System (ADS)

    Shum, Angela J.; Cowan, Melissa; Lähdesmäki, Ilkka; Lingley, Andrew; Otis, Brian; Parviz, Babak A.

    2009-08-01

    Tear fluid offers a potential route for non-invasive sensing of physiological parameters. Utilization of this potential depends on the ability to manufacture sensors that can be placed on the surface of the eye. A contact lens makes a natural platform for such sensors, but contact lens polymers present a challenge for sensor fabrication. This paper describes a microfabrication process for constructing sensors that can be integrated into the structure of a functional contact lens in the future. To demonstrate the capabilities of the process, an amperometric glucose sensor was fabricated on a polymer substrate. The sensor consists of platinum working and counter electrodes, as well as a region of indium-tin oxide (ITO) for glucose oxidase immobilization. An external silver-silver chloride electrode was used as the reference electrode during the characterization experiments. Sensor operation was validated by hydrogen peroxide measurements in the 10- 20 μM range and glucose measurements in the 0.125-20 mM range.

  4. THE OPTIMAL GRAVITATIONAL LENS TELESCOPE

    SciTech Connect

    Surdej, J.; Hanot, C.; Sadibekova, T.; Delacroix, C.; Habraken, S.; Coleman, P.; Dominik, M.; Le Coroller, H.; Mawet, D.; Quintana, H.; Sluse, D.

    2010-05-15

    Given an observed gravitational lens mirage produced by a foreground deflector (cf. galaxy, quasar, cluster, ...), it is possible via numerical lens inversion to retrieve the real source image, taking full advantage of the magnifying power of the cosmic lens. This has been achieved in the past for several remarkable gravitational lens systems. Instead, we propose here to invert an observed multiply imaged source directly at the telescope using an ad hoc optical instrument which is described in the present paper. Compared to the previous method, this should allow one to detect fainter source features as well as to use such an optimal gravitational lens telescope to explore even fainter objects located behind and near the lens. Laboratory and numerical experiments illustrate this new approach.

  5. Miniature hybrid optical imaging lens

    DOEpatents

    Sitter, D.N. Jr.; Simpson, M.L.

    1997-10-21

    A miniature lens system that corrects for imaging and chromatic aberrations is disclosed, the lens system being fabricated from primarily commercially-available components. A first element at the input to a lens housing is an aperture stop. A second optical element is a refractive element with a diffractive element closely coupled to, or formed a part of, the rear surface of the refractive element. Spaced closely to the diffractive element is a baffle to limit the area of the image, and this is closely followed by a second refractive lens element to provide the final correction. The image, corrected for aberrations exits the last lens element to impinge upon a detector plane were is positioned any desired detector array. The diffractive element is fabricated according to an equation that includes, as variables, the design wavelength, the index of refraction and the radius from an optical axis of the lens system components. 2 figs.

  6. Miniature hybrid optical imaging lens

    DOEpatents

    Sitter, Jr., David N.; Simpson, Marc L.

    1997-01-01

    A miniature lens system that corrects for imaging and chromatic aberrations, the lens system being fabricated from primarily commercially-available components. A first element at the input to a lens housing is an aperture stop. A second optical element is a refractive element with a diffractive element closely coupled to, or formed a part of, the rear surface of the refractive element. Spaced closely to the diffractive element is a baffle to limit the area of the image, and this is closely followed by a second refractive lens element to provide the final correction. The image, corrected for aberrations exits the last lens element to impinge upon a detector plane were is positioned any desired detector array. The diffractive element is fabricated according to an equation that includes, as variables, the design wavelength, the index of refraction and the radius from an optical axis of the lens system components.

  7. Dispersion-compensated Fresnel lens

    DOEpatents

    Johnson, K.C.

    1992-11-03

    A transmission grating is used to reduce chromatic aberration in a Fresnel lens, wherein the lens chromatic dispersion is offset and substantially canceled by the grating's diffraction-induced dispersion. The grating comprises a Fresnel-type pattern of microscopic facets molded directly into the lens surface. The facets would typically have a profile height of around 4[times]10[sup [minus]5] inch and a profile width of at least 10[sup [minus]3] inch. In its primary intended application, the invention would function to improve the optical performance of a Fresnel lens used to concentrate direct sunlight. 10 figs.

  8. Dispersion-compensated fresnel lens

    DOEpatents

    Johnson, Kenneth C.

    1992-01-01

    A transmission grating is used to reduce chromatic aberration in a Fresnel lens, wherein the lens chromatic dispersion is offset and substantially canceled by the grating's diffraction-induced dispersion. The grating comprises a Fresnel-type pattern of microscopic facets molded directly into the lens surface. The facets would typically have a profile height of around 4.multidot.10.sup.-5 inch and a profile width of at least 10.sup.-3 inch. In its primary intended application, the invention would function to improve the optical performance of a Fresnel lens used to concentrate direct sunlight.

  9. Lens of Eye Dosimetry

    SciTech Connect

    Mallett, Michael Wesley

    2015-03-23

    An analysis of LANL occupational dose measurements was made with respect to lens of eye dose (LOE), in particular, for plutonium workers. Table 1 shows the reported LOE as a ratio of the “deep” (photon only) and “deep+neutron” dose for routine monitored workers at LANL for the past ten years. The data compares the mean and range of these values for plutonium workers* and non-routine plutonium workers. All doses were reported based on measurements with the LANL Model 8823 TLD.

  10. Physics of electrostatic lens

    NASA Astrophysics Data System (ADS)

    1981-09-01

    The purpose of this program was to study the physics of the ion-energy boosting electrostatic lens for collective ion acceleration in the Luce diode. Extensive work was done in preparation for experiments on the PI Pulserad 1150. Analytic work was done on the orbit of protons in a mass spectrometer and a copper stack for nuclear activation analysis of proton energy spectrum has been designed. Unfortunately, a parallel program which would provide the Luce diode for the collective ion acceleration experiment never materialized. As a result no experiments were actually performed on the Pulserad 1150.

  11. The 2014 IODC lens design problem: the Cinderella lens

    NASA Astrophysics Data System (ADS)

    Juergens, Richard C.

    2014-12-01

    The lens design problem for the 2014 IODC is to design a 100 mm focal length lens in which all the components of the lens can be manufactured from ten Schott N-BK7 lens blanks 100 mm in diameter x 30 mm thick. The lens is used monochromatically at 587.56 nm. The goal of the problem is to maximize the product of the entrance pupil diameter and the semi-field of view while holding the RMS wavefront error to <= 0.070 wave within the field of view. There were 45 entries from 13 different countries. Four different commercial lens design programs were used, along with six custom, in-house programs. The number of lens elements in the entries ranged from 10 to 52. The winning entry from Jon Ehrmann had 25 lens elements, and had an entrance pupil diameter of 33.9 mm and a semi-field of view of 62.5° for a merit function product of 2,119.

  12. Hangar no. 2 perspective detail view of west doors. Note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Hangar no. 2 perspective detail view of west doors. Note door tracks in underside of upper door structure. Darkening at top of image due to lens vignetting. Looking 78 w. - Marine Corps Air Station Tustin, Southern Lighter Than Air Ship Hangar, Near intersection of Windmill Road & Johnson Street, Tustin, Orange County, CA

  13. Electrostatic Focusing Lens

    NASA Astrophysics Data System (ADS)

    Thomas, Eric; Hopkins, Demitri

    2011-10-01

    We developed an electrostatic focusing lens capable of generating DD reactions, by focusing deuterium ions generated from a pointed emitter at a frozen heavy water target. Due to difficulty with the pointed emitter, we later switched to a hollow cathode design. To model the lenses, chamber, and calculate the dimensions for the design that would maximize ion energy and density, the program SIMION was used. During stable operation, vacuum was hand adjusted around 10-13 mTorr. To keep stable beam, DC voltage generator was varied between 15-25 kV. Hand adjusting was necessary, because at points in the operation the frozen heavy water would release vapor at an increased rate. This caused the pressure to rise and the beam current to spike, creating instabilities and an arc to the lens. Three methods were used to determine successful DD production. (1) Two differently shielded Geiger counters (unshielded and UHMW-PE insulated tube), (2) Spectrophotometer comparing control peaks with heavy water tests, and (3) a calibrated bubble dosimeter specific to neutrons. Analysis of the results suggest the neutrons flux varied from 532 to 1.4 × 106 neutrons/sec, and require further tests to plot and narrow results.

  14. Criteria for observation of the gravitational lens effect

    SciTech Connect

    Mitskevich, N.V.

    1980-11-01

    In connection with the possible interpretation of observations of the double quasar 0957+561 as a manifestation of the gravitational lens effect, the problem of testing the coherence of the emission of the two sources in the optical and radio ranges and possible distortions of the interference pattern due to such coherence is discussed. The importance of observing time variations in the appearance of the sources is also noted.

  15. Imaging characteristics of ball lens

    NASA Astrophysics Data System (ADS)

    Li, Qinghui; Shao, Xiaopeng

    2014-05-01

    In most digital imaging applications, high-resolution imaging or videos are usually desired for later processing and analysis. The desire for high-resolution stems from two principal application areas: improvement of pictorial information for human interpretation, and helping representation for automatic machine preception. While the image sensors limit the spatial resolution of the image, the image details are also limited by the optical system, due to diffraction, and aberration1. Monocentric lens are an attractive option for gigapixel camera because the symmetrical design focuses light identically coming from any direction. Marks and Brady proposed a monocentric lens design imaging 40 gigapixels with an f-number of 2.5 and resolving 2 arcsec over a 120 degrees field of view2. Recently, Cossairt, Miau, and Nayer proposed a proof-of-concept gigapixel computational camera consisting of a large ball lens shared by several small planar sensors coupled with a deblurring step3. The design consists of a ball element resulting in a lens that is both inexpensive to produce and easy to align. Because the resolution of spherical lens is fundamentally limited by geometric aberrations, the imaging characteristics of the ball lens is expressed by the geometrical aberrations, in which the general equations for the primary aberration of the ball lens are given. The effect of shifting the stop position on the aberrations of a ball lens is discussed. The variation of the axial chromatic aberration with the Abbe V-number when the refraction index takes different values is analyzed. The variation of the third-order spherical aberration ,the fifth-order spherical aberration and the spherical aberration obtained directly from ray tracing with the f-number is discussed. The other imaging evaluation merits, such as the spot diagram, the modulation transfer function(MTF) and the encircled energy are also described. Most of the analysis of the ball lens is carried out using OSLO optics

  16. Pediatric genetic disorders of lens.

    PubMed

    Nihalani, Bharti R

    2014-12-01

    Pediatric genetic disorders of lens include various cataractous and non-cataractous anomalies. The purpose of this review is to help determine the genetic cause based on the lens appearance, ocular and systemic associations. Children with bilateral cataracts require a comprehensive history, ophthalmic and systemic examination to guide further genetic evaluation. With advancements in genetics, it is possible to determine the genetic mutations and assess phenotype genotype correlation in different lens disorders. The genetic diagnosis helps the families to better understand the disorder and develop realistic expectations as to the course of their child's disorder. PMID:27625879

  17. Pediatric genetic disorders of lens

    PubMed Central

    Nihalani, Bharti R.

    2014-01-01

    Pediatric genetic disorders of lens include various cataractous and non-cataractous anomalies. The purpose of this review is to help determine the genetic cause based on the lens appearance, ocular and systemic associations. Children with bilateral cataracts require a comprehensive history, ophthalmic and systemic examination to guide further genetic evaluation. With advancements in genetics, it is possible to determine the genetic mutations and assess phenotype genotype correlation in different lens disorders. The genetic diagnosis helps the families to better understand the disorder and develop realistic expectations as to the course of their child's disorder.

  18. A liquid crystal adaptive lens

    NASA Technical Reports Server (NTRS)

    Kowel, S. T.; Cleverly, D.

    1981-01-01

    Creation of an electronically controlled liquid crystal lens for use as a focusing mechanism in a multi-element lens system or as an adaptive optical element is analyzed. Varying the index of refraction is shown to be equivalent to the shaping of a solid refracting material. Basic characteristics of liquid crystals, essential for the creation of a lens, are reviewed. The required variation of index of refraction is provided by choosing appropriate electrode voltages. The configuration required for any incoming polarization is given and its theoretical performance in terms of modulation transfer function derived.

  19. Lens system for a photo ion spectrometer

    DOEpatents

    Gruen, Dieter M.; Young, Charles E.; Pellin, Michael J.

    1990-01-01

    A lens system in a photo ion spectrometer for manipulating a primary ion beam and ionized atomic component. The atomic components are removed from a sample by a primary ion beam using the lens system, and the ions are extracted for analysis. The lens system further includes ionization resistant coatings for protecting the lens system.

  20. Lens system for a photo ion spectrometer

    DOEpatents

    Gruen, D.M.; Young, C.E.; Pellin, M.J.

    1990-11-27

    A lens system in a photo ion spectrometer for manipulating a primary ion beam and ionized atomic component is disclosed. The atomic components are removed from a sample by a primary ion beam using the lens system, and the ions are extracted for analysis. The lens system further includes ionization resistant coatings for protecting the lens system. 8 figs.

  1. Lens design based on lens form parameters using Gaussian brackets

    NASA Astrophysics Data System (ADS)

    Yuan, Xiangyu; Cheng, Xuemin

    2014-11-01

    The optical power distribution and the symmetry of the lens components are two important attributes that decide the ultimate lens performance and characteristics. Lens form parameters W and S are the key criteria describing the two attributes mentioned above. Lens components with smaller W and S will have a good nature of aberration balance and perform well in providing good image quality. Applying the Gaussian brackets, the two lens form parameters and the Seidel Aberration Coefficients are reconstructed. An initial lens structure can be analytically described by simultaneous equations of Seidel Aberration Coefficients and third-order aberration theory. Adding the constraints of parameters W and S in the solving process, a solution with a proper image quality and aberration distribution is achieved. The optical properties and image quality of the system based on the parameters W and S are also analyzed in this article. In the method, the aberration distribution can be controlled to some extent in the beginning of design, so that we can reduce some workload of optimization later.

  2. 2. West portal of Tunnel 3, oblique view to northnorthwest, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 3, oblique view to north-northwest, 135mm lens. Note the simple concrete portal face and wingwalls, characteristic of the later (1923-27) period of construction on the Natron Cutoff. Note also the extreme surface spalling of the concrete, evidence of the severe freeze-thaw cycle at this elevation. - Southern Pacific Railroad Natron Cutoff, Tunnel 3, Milepost 537.77, Odell Lake, Klamath County, OR

  3. Survey of intraocular lens material and design.

    PubMed

    Doan, Kim T; Olson, Randall J; Mamalis, Nick

    2002-02-01

    Modern cataract surgery is constantly evolving and improving in terms of lens material and design. Researchers and physicians strive to obtain better refractive correction with smaller wound size and minimizing host cell response to limit the proliferation of lens epithelial cells leading to opacification of the lens capsule. Intraocular lens material varies in water content, refractive index, and tensile strength. Intraocular lens design has undergone revisions to prohibit lens epithelial cell migration and reflection of internal and external light. The evolution of intraocular lens and extracapsular cataract surgery has lead to faster postoperative recovery and better visual outcomes.

  4. Elastic constants of the human lens capsule.

    PubMed

    Fisher, R F

    1969-03-01

    1. A technique is described whereby the elasticity of the human lens capsule has been determined at birth and throughout life. This technique requires three separate determinations: (a) thickness; (b) stress and strain; (c) Poisson's ratio; (a) the capsule was clamped between accurately perforated ground glass plates and its thickness determined by noting the change in depth of focus between Latex spherules adhering to its upper and lower surfaces; (b) the undisturbed capsule was then placed in a specially designed glass distension apparatus and the relationship between volume and pressure recorded when it was distended with isotonic saline. The permeability of the capsule was also measured; (c) in some cases Poisson's ratio was determined by measuring the change of thickness of the capsule and the height to which it rose when distended with isotonic saline at different pressures. An apparatus was designed for this purpose.2. The average thickness of the anterior capsule increases from birth until about the 60th year but thereafter it decreases slightly.3. Poisson's ratio was about 0.47 for both cat and human capsule, and no significant variations with age in human capsule could be detected.4. Corrected volume pressure curves obeyed Hook's law almost to the point of capsule rupture.5. In childhood Young's Modulus of elasticity is about 6 x 10(7) dyn/cm(2) and decreases to 3 x 10(7) dyn/cm(2) at 60 and 1.5 x 10(7) dyn/cm(2) in extreme old age.6. The ultimate tensile stress was 2.3 x 10(7) dyn/cm(2) in young capsules and 0.7 x 10(7) dyn/cm(2) in old ones. The maximum percentage elongation was 29 per cent and independent of age.7. The implications of these findings are discussed in relation to(a) the mechanical properties of the lens capsule;(b) the ageing of the lens capsule and basement membranes; and(c) the decrease in elasticity of the lens capsule as a cause of presbyopia.

  5. Contact lens management of keratoconus.

    PubMed

    Downie, Laura E; Lindsay, Richard G

    2015-07-01

    Contact lenses are the primary form of visual correction for patients with keratoconus. Contemporary advances in contact lens designs and materials have significantly expanded the available fitting options for patients with corneal ectasia. Furthermore, imaging technology, such as corneal topography and anterior segment optical coherence tomography, can be applied to both gain insight into corneal microstructural changes and to guide contact lens fitting. This paper provides a comprehensive review of the range of contact lens modalities, including soft lenses, hybrid designs, rigid lenses, piggyback configurations, corneo-scleral, mini-scleral and scleral lenses that are currently available for the optical management of keratoconus. The review also discusses the importance of monitoring for disease progression in patients with keratoconus, in particular children, who tend to undergo more rapid progressive changes, so as to facilitate appropriate modification to contact lens fitting and/or potential referral for corneal collagen cross-linking treatment, as appropriate. PMID:26104589

  6. Intraocular lens fixation with dacron.

    PubMed

    Peyman, G A; Koziol, J E

    1978-10-01

    To overcome the problem of postoperative lens dislocation, we evaluated a new means of lens fixation. Our experimental studies in rabbits and primates demonstrated that Dacron polyethylene terephtalate induced a cellular reaction from either the anterior or posterior iris surface when placed in contact with the iris, thereby establishing a bond between the Dacron fibers and the iris. Dacron mesh can be attached to the distal portion of either the anterior or posterior loops of a Binkhorst iris clip (4-loop) lens. In the rabbit eye, lens fixation occurred within five days; in the primate eye, 30 days. When combined with silk, Dacron produced tissue ingrowth in the primate eye within 14 days. No unwanted reaction occurred in any animal with the Dacron and silk combination. Being biodegradable, the silk induced faster cellular ingrowth than the Dacron. However, Dacron, which is not biodegradable, provided a permanent means of fixation. PMID:155053

  7. Single lens laser beam shaper

    DOEpatents

    Liu, Chuyu; Zhang, Shukui

    2011-10-04

    A single lens bullet-shaped laser beam shaper capable of redistributing an arbitrary beam profile into any desired output profile comprising a unitary lens comprising: a convex front input surface defining a focal point and a flat output portion at the focal point; and b) a cylindrical core portion having a flat input surface coincident with the flat output portion of the first input portion at the focal point and a convex rear output surface remote from the convex front input surface.

  8. Intravitreal Phacoemulsification Using Torsional Handpiece for Retained Lens Fragments

    PubMed Central

    Kumar, Vinod; Takkar, Brijesh

    2016-01-01

    Purpose: To evaluate the results of intravitreal phacoemulsification with torsional hand piece in eyes with posteriorly dislocated lens fragments. Methods: In this prospective, interventional case series, 15 eyes with retained lens fragments following phacoemulsification were included. All patients underwent standard three-port pars plana vitrectomy and intravitreal phacoemulsification using sleeveless, torsional hand piece (OZiL™, Alcon's Infiniti Vision System). Patients were followed up for a minimum of six months to evaluate the visual outcomes and complications. Results: The preoperative best-corrected visual acuity (BCVA) ranged from light perception to 0.3. No complications such as thermal burns of the scleral wound, retinal damage due to flying lens fragments, or difficult lens aspiration occurred during intravitreal phacoemulsification. Mean post-operative BCVA at the final follow-up was 0.5. Two eyes developed cystoid macular edema, which was managed medically. No retinal detachment was noted. Conclusion: Intravitreal phacoemulsification using torsional hand piece is a safe and effective alternative to conventional longitudinal phacofragmentation. PMID:27621783

  9. Intravitreal Phacoemulsification Using Torsional Handpiece for Retained Lens Fragments

    PubMed Central

    Kumar, Vinod; Takkar, Brijesh

    2016-01-01

    Purpose: To evaluate the results of intravitreal phacoemulsification with torsional hand piece in eyes with posteriorly dislocated lens fragments. Methods: In this prospective, interventional case series, 15 eyes with retained lens fragments following phacoemulsification were included. All patients underwent standard three-port pars plana vitrectomy and intravitreal phacoemulsification using sleeveless, torsional hand piece (OZiL™, Alcon's Infiniti Vision System). Patients were followed up for a minimum of six months to evaluate the visual outcomes and complications. Results: The preoperative best-corrected visual acuity (BCVA) ranged from light perception to 0.3. No complications such as thermal burns of the scleral wound, retinal damage due to flying lens fragments, or difficult lens aspiration occurred during intravitreal phacoemulsification. Mean post-operative BCVA at the final follow-up was 0.5. Two eyes developed cystoid macular edema, which was managed medically. No retinal detachment was noted. Conclusion: Intravitreal phacoemulsification using torsional hand piece is a safe and effective alternative to conventional longitudinal phacofragmentation.

  10. Rap1 GTPase is required for mouse lens epithelial maintenance and morphogenesis

    PubMed Central

    Maddala, Rupalatha; Nagendran, Tharkika; Lang, Richard A.; Morozov, Alexei; Rao, Ponugoti V.

    2015-01-01

    Rap1, a Ras-like small GTPase, plays a crucial role in cell-matrix adhesive interactions, cell-cell junction formation, cell polarity and migration. The role of Rap1 in vertebrate organ development and tissue architecture, however, remains elusive. We addressed this question in a mouse lens model system using a conditional gene targeting approach. While individual germline deficiency of either Rap1a or Rap1b did not cause overt defects in mouse lens, conditional double deficiency (Rap1 cKO) prior to lens placode formation led to an ocular phenotype including microphthalmia and lens opacification in embryonic mice. The embryonic Rap1 cKO mouse lens exhibited striking defects including loss of E-cadherin- and ZO-1-based cell-cell junctions, disruption of paxillin and β1-integrin-based cell adhesive interactions along with abnormalities in cell shape and apical-basal polarity of epithelium. These epithelial changes were accompanied by increased levels of α-smooth muscle actin, vimentin and N-cadherin, and expression of transcriptional suppressors of E-cadherin (Snai1, Slug and Zeb2), and a mesenchymal metabolic protein (Dihydropyrimidine dehydrogenase). Additionally, while lens differentiation was not overtly affected, increased apoptosis and dysregulated cell cycle progression were noted in epithelium and fibers in Rap1 cKO mice. Collectively these observations uncover a requirement for Rap1 in maintenance of lens epithelial phenotype and morphogenesis. PMID:26212757

  11. Lens opacity induced by lipid peroxidation products as a model of cataract associated with retinal disease.

    PubMed

    Babizhayev, M A; Deyev, A I

    1989-07-17

    The cataractous lenses of patients with retinitis pigmentosa have been studied by electron microscopy. The posterior subcapsular opacities showed common ultrastructural features. Large areas of disruption of the lens fibre pattern were observed which showed an increase in the number of fibre membranes per unit area. In many regions an elaborate and regular folding of membranes was noted which produced complex 'figure-of-eight' and 'tramline' patterns, as well as membranous lamellar bodies. Masses of various size globules were also identified. It has been established that injection into the vitreous body of the rabbit eye of a suspension of liposomes prepared from phospholipids containing lipid peroxidation products induces the development of posterior subcapsular cataract. Such modelling of cataract is based on a type of clouding of the crystalline lens similar to that observed in cataract resulting from diffusion of toxic lipid peroxidation products from the retina to the lens through the vitreous body on degeneration of the photoreceptors. Saturated liposomes (prepared from beta-oleoyl-gamma-palmitoyl-L-alpha-phosphatidylcholine) do not cause clouding of the lens, which demonstrates the peroxide mechanism of the genesis of this form of cataract. Clouding of the lens is accompanied by accumulation of fluorescing lipid peroxidation products in the vitreous body, aqueous humor and the lens and also by a fall in the concentration of reduced glutathione in the lens. From the results it is concluded that lipid peroxidation may initiate the development of cataract. PMID:2742866

  12. Notes on Experiments.

    ERIC Educational Resources Information Center

    Physics Education, 1979

    1979-01-01

    Describes the following: use and construction of a lens-pinhole spatial filter assembly to produce expanded beams; how to modify a unilab V. L. F. oscillator to give variable frequencies between .1 Hz and 10 Hz; to use Crookes radiometer quantitatively; and an externally located, movable probe for plasma physics experiments, using conventional…

  13. Elementary Science Notes

    ERIC Educational Resources Information Center

    School Science Review, 1972

    1972-01-01

    Short articles describe techniques suitable for junior high school science, including the use of a toy drinking bird" to start discussion, using cobalt chloride solution to demonstrate convection currents, demonstration of the relationship between freezing point and concentration, and instructions for building a simple lens camera, a circuit…

  14. Delayed accumulation of lens material behind the foldable intraocular lens.

    PubMed

    Bhattacharjee, Harsha; Bhattacharjee, Kasturi; Bhattacharjee, Pankaj

    2007-01-01

    Foldable acrylic intraocular lenses (IOLs) are known to reduce posterior capsule opacification by preventing migration of lens epithelial cells with its square edge design and its property of tackiness. Studies have reported a mean adhesiveness to posterior capsule more than three times higher for certain acrylic foldable IOLs than polymethyl methacrylate IOLs. The authors would like to report two cases where the force of tackiness was compensated, thereby presenting with delayed accumulation of lens material in the capsular bags behind the IOL with temporary loss of vision. PMID:17951912

  15. Delayed accumulation of lens material behind the foldable intraocular lens.

    PubMed

    Bhattacharjee, Harsha; Bhattacharjee, Kasturi; Bhattacharjee, Pankaj

    2007-01-01

    Foldable acrylic intraocular lenses (IOLs) are known to reduce posterior capsule opacification by preventing migration of lens epithelial cells with its square edge design and its property of tackiness. Studies have reported a mean adhesiveness to posterior capsule more than three times higher for certain acrylic foldable IOLs than polymethyl methacrylate IOLs. The authors would like to report two cases where the force of tackiness was compensated, thereby presenting with delayed accumulation of lens material in the capsular bags behind the IOL with temporary loss of vision.

  16. Delayed accumulation of lens material behind the foldable intraocular lens

    PubMed Central

    Bhattacharjee, Kasturi; Bhattacharjee, Pankaj

    2007-01-01

    Foldable acrylic intraocular lenses (IOLs) are known to reduce posterior capsule opacification by preventing migration of lens epithelial cells with its square edge design and its property of tackiness. Studies have reported a mean adhesiveness to posterior capsule more than three times higher for certain acrylic foldable IOLs than polymethyl methacrylate IOLs. The authors would like to report two cases where the force of tackiness was compensated, thereby presenting with delayed accumulation of lens material in the capsular bags behind the IOL with temporary loss of vision. PMID:17951912

  17. The SNAP Strong Lens Survey

    SciTech Connect

    Marshall, P.

    2005-01-03

    Basic considerations of lens detection and identification indicate that a wide field survey of the types planned for weak lensing and Type Ia SNe with SNAP are close to optimal for the optical detection of strong lenses. Such a ''piggy-back'' survey might be expected even pessimistically to provide a catalogue of a few thousand new strong lenses, with the numbers dominated by systems of faint blue galaxies lensed by foreground ellipticals. After sketching out our strategy for detecting and measuring these galaxy lenses using the SNAP images, we discuss some of the scientific applications of such a large sample of gravitational lenses: in particular we comment on the partition of information between lens structure, the source population properties and cosmology. Understanding this partitioning is key to assessing strong lens cosmography's value as a cosmological probe.

  18. [Contact lens-related keratitis].

    PubMed

    Steiber, Zita; Berta, András; Módis, László

    2013-11-10

    Nowadays, keratitis, corneal infection due to wearing contact lens means an increasingly serious problem. Neglected cases may lead to corneal damage that can cause blindness in cases of otherwise healthy eyes. Early diagnosis based on the clinical picture and the typical patient history is an important way of prevention. Prophylaxis is substantial to avoid bacterial and viral infection that is highly essential in this group of diseases. Teaching contact lens wearers the proper contact lens care, storage, sterility, and hygiene regulations is of great importance. In case of corneal inflammation early accurate diagnosis supported by microbiological culture from contact lenses, storage boxes or cornea is very useful. Thereafter, targeted drug therapy or in therapy-resistant cases surgical treatment may even be necessary in order to sustain suitable visual acuity.

  19. A Prototype Antifungal Contact Lens

    PubMed Central

    Ciolino, Joseph B.; Hudson, Sarah P.; Mobbs, Ashley N.; Hoare, Todd R.; Iwata, Naomi G.; Fink, Gerald R.

    2011-01-01

    Purpose. To design a contact lens to treat and prevent fungal ocular infections. Methods. Curved contact lenses were created by encapsulating econazole-impregnated poly(lactic-co-glycolic) acid (PLGA) films in poly(hydroxyethyl methacrylate) (pHEMA) by ultraviolet photopolymerization. Release studies were conducted in phosphate-buffered saline at 37°C with continuous shaking. The contact lenses and their release media were tested in an antifungal assay against Candida albicans. Cross sections of the pre- and postrelease contact lenses were characterized by scanning electron microscopy and by Raman spectroscopy. Results. Econazole-eluting contact lenses provided extended antifungal activity against Candida albicans fungi. Fungicidal activity varied in duration and effectiveness depending on the mass of the econazole-PLGA film encapsulated in the contact lens. Conclusions. An econazole-eluting contact lens could be used as a treatment for fungal ocular infections. PMID:21527380

  20. Automated Fresnel lens tester system

    SciTech Connect

    Phipps, G.S.

    1981-07-01

    An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

  1. Computer-aided lens assembly.

    PubMed

    Tomlinson, Richard; Alcock, Rob; Petzing, Jon; Coupland, Jeremy

    2004-01-20

    We propose a computer-aided method of lens manufacture that allows assembly, adjustment, and test phases to be run concurrently until an acceptable level of optical performance is reached. Misalignment of elements within a compound lens is determined by a comparison of the results of physical ray tracing by use of an array of Gaussian laser beams with numerically obtained geometric ray traces. An estimate of misalignment errors is made, and individual elements are adjusted in an iterative manner until performance criteria are achieved. The method is illustrated for the alignment of an air-spaced doublet. PMID:14765916

  2. Liquid crystal Fresnel lens display

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Qian; Abhishek Kumar, Srivastava; Alwin Tam, Ming-Wai; Zheng, Zhi-Gang; Shen, Dong; Vladimir, Chigrinov G.; Kwok, Hoi-Sing

    2016-09-01

    A novel see-through display with a liquid crystal lens array was proposed. A liquid crystal Fresnel lens display (LCFLD) with a holographic screen was demonstrated. The proposed display system has high efficiency, simple fabrication, and low manufacturing cost due to the absence of a polarizer and color filter. Project supported by Partner State Key Laboratory on Advanced Displays and Optoelectronics Technologies HKUST, China, the National Natural Science Foundation of China (Grant Nos. 61435008 and 61575063), and the Fundamental Research Funds for the Central Universities, China (Grant No. WM1514036).

  3. Liquid crystal Fresnel lens display

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Qian; Abhishek Kumar, Srivastava; Alwin Tam, Ming-Wai; Zheng, Zhi-Gang; Shen, Dong; Vladimir, Chigrinov G.; Kwok, Hoi-Sing

    2016-09-01

    A novel see-through display with a liquid crystal lens array was proposed. A liquid crystal Fresnel lens display (LCFLD) with a holographic screen was demonstrated. The proposed display system has high efficiency, simple fabrication, and low manufacturing cost due to the absence of a polarizer and color filter. Project supported by Partner State Key Laboratory on Advanced Displays and Optoelectronics Technologies HKUST, China, the National Natural Science Foundation of China (Grant Nos. 61435008 and 61575063), and the Fundamental Research Funds for the Central Universities, China (Grant No. WM1514036).

  4. Contact lens wear at altitude: subcontact lens bubble formation.

    PubMed

    Flynn, W J; Miller, R E; Tredici, T J; Block, M G; Kirby, E E; Provines, W F

    1987-11-01

    A concern in the past regarding contact lens wear in aviation has been the fear of subcontact lens bubble formation. Previous reports have documented the occurrence of bubbles with hard (PMMA) lenses. Reported here are the results of contact lens bubble studies with soft hydrophilic and rigid gas-permeable lenses. Testing was accomplished in hypobaric chambers and onboard USAF transport aircraft. Hypobaric chamber flights were of three types: high-altitude flights up to 7,620 m (25,000 ft); explosive rapid decompressions from 2,438.4 m (8,000 ft) to 7,620 m (25,000 ft); and 4-h flights at 3,048 m (10,000 ft). Flights aboard transport aircraft typically had cabin pressures equivalent to 1,524-2,438.4 m (5,000-8,000 ft), and ranged in duration from 3 to 10 h. For subjects wearing rigid gas-permeable lenses, central bubbles were detected in 2 of 10 eyes and occurred at altitudes greater than 6,096 m (20,000 ft). With soft contact lenses, bubble formation was detected in approximately 24% (22 of 92 eyes) of the eyes tested, sometimes occurring at altitudes as low as 1,828.8 m (6,000 ft). Soft lens bubbles were always located at the limbus and were without sequela to vision or corneal epithelial integrity. Bubbles under the rigid lenses were primarily central, with potential adverse effects on vision and the corneal epithelium.

  5. Ensuring Safe Use of Contact Lens Solution

    MedlinePlus

    ... For Consumers Consumer Updates Ensuring Safe Use of Contact Lens Solution Share Tweet Linkedin Pin it More ... back to top Dos and Don'ts for Contact Lens Wearers DO: Always wash your hands before ...

  6. SimpLens: Interactive gravitational lensing simulator

    NASA Astrophysics Data System (ADS)

    Saha, Prasenjit; Williams, Liliya L. R.

    2016-06-01

    SimpLens illustrates some of the theoretical ideas important in gravitational lensing in an interactive way. After setting parameters for elliptical mass distribution and external mass, SimpLens displays the mass profile and source position, the lens potential and image locations, and indicate the image magnifications and contours of virtual light-travel time. A lens profile can be made shallower or steeper with little change in the image positions and with only total magnification affected.

  7. A broadband transformation-optics metasurface lens

    SciTech Connect

    Wan, Xiang; Xiang Jiang, Wei; Feng Ma, Hui; Jun Cui, Tie

    2014-04-14

    We present a transformational metasurface Luneburg lens based on the quasi-conformal mapping method, which has weakly anisotropic constitutive parameters. We design the metasurface lens using inhomogeneous artificial structures to realize the required surface refractive indexes. The transformational metasurface Luneburg lens is fabricated and the measurement results demonstrate very good performance in controlling the radiated surface waves.

  8. 21 CFR 886.3600 - Intraocular lens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens. 886.3600 Section 886.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3600 Intraocular lens. (a) Identification. An intraocular lens is a device made of materials...

  9. Contact Lens-Related Eye Infections

    MedlinePlus

    ... Stories Español Eye Health / Eye Health A-Z Contact Lens-Related Eye Infections Sections Contact Lens-Related ... About Contact Lenses Proper Care of Contact Lenses Contact Lens-Related Eye Infections Written by: Kierstan Boyd ...

  10. New merit values for lens performance.

    NASA Astrophysics Data System (ADS)

    Nakagawa, J.

    1995-08-01

    New merit values for lens performance m=Σ(Qh)2 and m¯=Σ(Qh¯)2 were introduced, where Q is Abbe's invariant, h is paraxial ray height and the bar indicates principal ray. The studies showed that m and m¯ are useful for the evaluation of potentialities of lens systems and for the optimization of lens designs.

  11. In vivo human crystalline lens topography

    PubMed Central

    Ortiz, Sergio; Pérez-Merino, Pablo; Gambra, Enrique; de Castro, Alberto; Marcos, Susana

    2012-01-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye with known surfaces geometry and on a human lens in vitro, and demonstrated on three human lenses in vivo. Not correcting for distortion overestimated the anterior lens radius by 25% and the posterior lens radius by more than 65%. In vivo lens surfaces were fitted by biconicoids and Zernike polynomials after distortion correction. The anterior lens radii of curvature ranged from 10.27 to 14.14 mm, and the posterior lens radii of curvature ranged from 6.12 to 7.54 mm. Surface asphericities ranged from −0.04 to −1.96. The lens surfaces were well fitted by quadrics (with variation smaller than 2%, for 5-mm pupils), with low amounts of high order terms. Surface lens astigmatism was significant, with the anterior lens typically showing horizontal astigmatism (Z22 ranging from −11 to −1 µm) and the posterior lens showing vertical astigmatism (Z22 ranging from 6 to 10 µm). PMID:23082289

  12. [A new soft contact lens of 2-component silicone].

    PubMed

    Dreifus, M

    1991-05-01

    Silicon lenses, noted for their flexible elasticity, were submitted for patent registration prior to HEMA lenses, and before practical experience was available. Favorable clinical trials remained undone for a long time. After preclinical tests with additively moistened silicons and a new hydrophilic coating, clinical evaluation was conducted in accordance with the guidelines of the american health authorities (FDA). Contact-lens centers in Germany and Switzerland participated in these tests. Statistical analysis was done on the results from 233 test-persons. PMID:1886390

  13. Sticky-Note Murals

    ERIC Educational Resources Information Center

    Sands, Ian

    2011-01-01

    In this article, the author describes a sticky-note mural project that originated from his desire to incorporate contemporary materials into his assignments as well as to inspire collaboration between students. The process takes much more than sticking sticky notes to the wall. It takes critical thinking skills and teamwork to design and complete…

  14. On that Note...

    ERIC Educational Resources Information Center

    Stein, Harry

    1988-01-01

    Provides suggestions for note-taking from books, lectures, visual presentations, and laboratory experiments to enhance student knowledge, memory, and length of attention span during instruction. Describes topical and structural outlines, visual mapping, charting, three-column note-taking, and concept mapping. Benefits and application of…

  15. Infection prevention in NOTES.

    PubMed

    Kantsevoy, Sergey V

    2008-04-01

    Prevention of infection during natural orifice translumenal endoscopic surgery (NOTES) was identified as one of the most important challenges for translumenal surgery. Does infection prevention during NOTES warrant such attention? This article summarizes the accumulated data about septic complications during translumenal surgery.

  16. Tevatron electron lens magnetic system

    SciTech Connect

    Vladimir Shiltsev et al.

    2001-07-12

    In the framework of collaboration between IHEP and FNAL, a magnetic system of the Tevatron Electron Lens (TEL) has been designed and built. The TEL is currently installed in the superconducting ring of the Tevatron proton-antiproton collider and used for experimental studies of beam-beam compensation [1].

  17. The Fyodorov Sputnik intraocular lens.

    PubMed

    Kwitko, M L

    1979-04-01

    The author has implanted 197 Fyodorov intraocular lenses. With careful selection of patients, good surgical judgment, and meticulous surgery, a degree of success can be obtained with this lens, which will equal that of conventional cataract surgery. The surgical technique of implantation will be described. PMID:537770

  18. A Lens to the Enterprise.

    ERIC Educational Resources Information Center

    Zemsky, Robert, Ed.

    1999-01-01

    This essay is based on a series of roundtables convened through the Knight Collaborative National Medical Education Roundtable. It reports that the challenges and transformations experienced in recent years by community-based medical schools and clinical campuses offer a lens to the whole higher education enterprise, and asks the fundamental…

  19. A stochastic model of eye lens growth.

    PubMed

    Šikić, Hrvoje; Shi, Yanrong; Lubura, Snježana; Bassnett, Steven

    2015-07-01

    The size and shape of the ocular lens must be controlled with precision if light is to be focused sharply on the retina. The lifelong growth of the lens depends on the production of cells in the anterior epithelium. At the lens equator, epithelial cells differentiate into fiber cells, which are added to the surface of the existing fiber cell mass, increasing its volume and area. We developed a stochastic model relating the rates of cell proliferation and death in various regions of the lens epithelium to deposition of fiber cells and radial lens growth. Epithelial population dynamics were modeled as a branching process with emigration and immigration between proliferative zones. Numerical simulations were in agreement with empirical measurements and demonstrated that, operating within the strict confines of lens geometry, a stochastic growth engine can produce the smooth and precise growth necessary for lens function. PMID:25816743

  20. Adjustable hybrid diffractive/refractive achromatic lens.

    PubMed

    Valley, Pouria; Savidis, Nickolaos; Schwiegerling, Jim; Dodge, Mohammad Reza; Peyman, Gholam; Peyghambarian, N

    2011-04-11

    We demonstrate a variable focal length achromatic lens that consists of a flat liquid crystal diffractive lens and a pressure-controlled fluidic refractive lens. The diffractive lens is composed of a flat binary Fresnel zone structure and a thin liquid crystal layer, producing high efficiency and millisecond switching times while applying a low ac voltage input. The focusing power of the diffractive lens is adjusted by electrically modifying the sub-zones and re-establishing phase wrapping points. The refractive lens includes a fluid chamber with a flat glass surface and an opposing elastic polydimethylsiloxane (PDMS) membrane surface. Inserting fluid volume through a pump system into the clear aperture region alters the membrane curvature and adjusts the refractive lens' focal position. Primary chromatic aberration is remarkably reduced through the coupling of the fluidic and diffractive lenses at selected focal lengths. Potential applications include miniature color imaging systems, medical and ophthalmic devices, or any design that utilizes variable focal length achromats.

  1. Formation of Micro Lens by Laser Polymerization

    NASA Astrophysics Data System (ADS)

    Mori, Akira; Horiuchi, Takashi; Mizumachi, Manabu; Seino, Satoshi; Nakagawa, Takuya; Suzuki, Kaoru

    Recently, a micro lens has been demanded in uniting a laser device and an optical fiber. We have fabricated a new type of plastic micro lens by laser polymerization. The amount of the resin polymerized by exposing laser light, namely light-curing, depends on the laser power and exposing time. The shape of the lens can be controlled by changing the condition of laser irradiation. In this paper, the characteristic of the lens formed by this method was examined. Moreover, the relation between the lens shape and the condition of laser irradiation was investigated, and the condition to reducing a transverse spherical aberration was examined. As the result, the lens of 390μm in diameter was formed. The area which can be used for light coupling from a laser diode to a multimode fiber will be 81 % in the total lens area.

  2. LUVOIR Tech Notes

    NASA Technical Reports Server (NTRS)

    Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

    2016-01-01

    We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

  3. NOTES: the future.

    PubMed

    Giday, Samuel A; Magno, Priscilla; Kalloo, Anthony N

    2008-04-01

    The concept of natural orifice translumenal endoscopic surgery (NOTES) has grown in acceptance since the time of its introduction in 2000. Developments in techniques of peritoneal access and closure, surgical techniques, and equipment modification have already been published and intensive research is ongoing. Current and future endoscopists will reap the benefit of this research because many techniques and devices that are developed for NOTES will enhance the ability to perform luminal intervention, including polypectomy, endoluminal hemostasis, and submucosal resection. The authors attempt to predict the future of NOTES by describing potential applications for certain clinical scenarios and conditions.

  4. 6. Oblique view of upstream side of Bridge Number 310.58, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Oblique view of upstream side of Bridge Number 310.58, 135mm lens. Note ashlar stone masonry abutment built in 1886, Tunnel 15 at left. Heavy vegetation cover, steep banks, and lack of streamside footing precluded full elevation views of the upstream and downstream sides of this bridge. - Southern Pacific Railroad Shasta Route, Bridge No. 310.58, Milepost 310.58, Sims, Shasta County, CA

  5. Unilateral fronto-temporal headache with ocular pain caused by lens subluxation due to spontaneous zonulysis

    PubMed Central

    Park, Taejin; Choi, Gyuman

    2015-01-01

    A 52-year-old man presented to the emergency department (ED) for left frontotemporal headache and left eye pain. In the ED, visual exam with extra-ocular movement was performed to rule out ocular pathology and brain imaging to rule out cerebral pathology. No abnormal finding was noted after evaluation of ED. Initial exam by an ophthalmologist was also negative with normal intraocular pressure. Left lens dislocation was found only after brain imaging. In subsequent second exam by an ophthalmologist with iridodilator, lens dislocation due to spontaneous zonulysis was finally confirmed. Hence, ED physicians should carefully review ocular as well as brain anatomy in such cases.

  6. Reminiscence through the Lens of Social Media.

    PubMed

    Thomas, Lisa; Briggs, Pam

    2016-01-01

    Reminiscence is used to support and create new social bonds and give meaning to life. Originally perceived as a preoccupation of the aged, we now recognize that reminiscence has value throughout the lifespan. Increasingly, social media can be used to both support and prompt reminiscence, with Facebook's Lookback or Year in Review as recent examples. This work takes prompted reminiscence further, asking what forms and functions of reminiscence are supported by social media. Utilizing the online service MySocialBook, we invited participants to curate content from their personal Facebook account to then be transformed into a printed book. We used that book as a prompt for discussion of the reminiscence function of the curated material, using Westerhof and Bohlmeijer's (2014) reminiscence framework as a starting point. We conclude that this framework is valuable in understanding the role of social media in reminiscence, but note that earlier models, such as Webster's Reminiscence Functions Scale, are also relevant. We contribute to the reminiscence debate by adding a technological lens to the process of life review, whilst concurring with other researchers in this field that a robust conceptual framework is lacking, particularly when considering the forms of reminiscence that are most salient for younger people. PMID:27378971

  7. Reminiscence through the Lens of Social Media

    PubMed Central

    Thomas, Lisa; Briggs, Pam

    2016-01-01

    Reminiscence is used to support and create new social bonds and give meaning to life. Originally perceived as a preoccupation of the aged, we now recognize that reminiscence has value throughout the lifespan. Increasingly, social media can be used to both support and prompt reminiscence, with Facebook’s Lookback or Year in Review as recent examples. This work takes prompted reminiscence further, asking what forms and functions of reminiscence are supported by social media. Utilizing the online service MySocialBook, we invited participants to curate content from their personal Facebook account to then be transformed into a printed book. We used that book as a prompt for discussion of the reminiscence function of the curated material, using Westerhof and Bohlmeijer’s (2014) reminiscence framework as a starting point. We conclude that this framework is valuable in understanding the role of social media in reminiscence, but note that earlier models, such as Webster’s Reminiscence Functions Scale, are also relevant. We contribute to the reminiscence debate by adding a technological lens to the process of life review, whilst concurring with other researchers in this field that a robust conceptual framework is lacking, particularly when considering the forms of reminiscence that are most salient for younger people. PMID:27378971

  8. Lens Coupled Quantum Cascade Laser

    NASA Technical Reports Server (NTRS)

    Hu, Qing (Inventor); Lee, Alan Wei Min (Inventor)

    2013-01-01

    Terahertz quantum cascade (QC) devices are disclosed that can operate, e.g., in a range of about 1 THz to about 10 THz. In some embodiments, QC lasers are disclosed in which an optical element (e.g., a lens) is coupled to an output facet of the laser's active region to enhance coupling of the lasing radiation from the active region to an external environment. In other embodiments, terahertz amplifier and tunable terahertz QC lasers are disclosed.

  9. Glycation precedes lens crystallin aggregation

    SciTech Connect

    Swamy, M.S.; Perry, R.E.; Abraham, E.C.

    1987-05-01

    Non-enzymatic glycosylation (glycation) seems to have the potential to alter the structure of crystallins and make them susceptible to thiol oxidation leading to disulfide-linked high molecular weight (HMW) aggregate formation. They used streptozotocin diabetic rats during precataract and cataract stages and long-term cell-free glycation of bovine lens crystallins to study the relationship between glycation and lens crystallin aggregation. HMW aggregates and other protein components of the water-soluble (WS) and urea-soluble (US) fractions were separated by molecular sieve high performance liquid chromatography. Glycation was estimated by both (/sup 3/H)NaBH/sub 4/ reduction and phenylboronate agarose affinity chromatography. Levels of total glycated protein (GP) in the US fractions were about 2-fold higher than in the WS fractions and there was a linear increase in GP in both WS and US fractions. This increase was parallelled by a corresponding increase in HMW aggregates. Total GP extracted by the affinity method from the US fraction showed a predominance of HMW aggregates and vice versa. Cell-free glycation studies with bovine crystallins confirmed the results of the animals studies. Increasing glycation caused a corresponding increase in protein insolubilization and the insoluble fraction thus formed also contained more glycated protein. It appears that lens protein glycation, HMW aggregate formation, and protein insolubilization are interrelated.

  10. New Scleral Lens For Electroretinography

    NASA Astrophysics Data System (ADS)

    Charlier, J. R.; Grall, Y.; Legargasson, J. F.

    1986-05-01

    This paper presents a scleral lens specifically designed for the implementation of new electroretinography (E.R.G.) procedures including ganzeld ERG, pattern ERG and optic fiber ERG. Ganzfeld ERG requires a direct, uniform illumination of the retina and is usually obtained within a ball stimulation which provides precisely controlled stimulation conditions. Pattern ERG is related to the electrical activity of ganglion cells and is produced by a structured visual stimulus, for instance a cherkerboard reversal. Fiber optics stimulation is a promising new technique involving an optic fiber which connects the scleral lens to a remote light stimulator. The new scleral lens is made out of silicon. Silicon is an ideal material for ERG applications. It is highly permeable to oxygen. It eliminates the risk of corneal abrasion and it provides good comfort to the patient. Two layers of conductive silicon are used for recording the bioelectric potential difference of the cornea with respect to the eye lids. An optically transparent window allows for the projection of structured images on the retina. A wide angle conic aperture is provided for ganzfeld stimulation. The same cone is used as a blepharostat and as a plug for connecting the optic fiber, once the transparent window is centered with respect to the pupil entrance.

  11. Rethinking contact lens associated keratitis.

    PubMed

    Efron, Nathan; Morgan, Philip B

    2006-09-01

    This review presents a critical analysis of the literature relating to the use of binomial and polynomial classification schemes for categorising corneal infiltrative events (CIEs) associated with contact lens wear and the epidemiology of such events. The results of the Manchester Keratitis Study-a 12-month, prospective, hospital-based epidemiological study of contact lens wearer suffering from CIEs-are used as a tool to challenge and test traditional thinking in relation to contact lens associated keratitis. An innovative aspect of this study is the use of a novel clinical severity matrix to systematically score the severity of CIEs based on 10 key signs and symptoms. The ambiguities inherent in using binomial classification schemes (such as, microbial versus sterile, ulcerative versus non-ulcerative etcetera) are highlighted. The failure of a polynomial scheme-due to extensive classification overlap between proposed sub-types of CIEs-is demonstrated using a Venn diagram. A cartographic analysis reveals that infiltrates tend to occur in the superior cornea of patients wearing extended wear silicone hydrogel lenses, in the central cornea of patients wearing daily wear hydrogel daily disposable lenses and in the peripheral cornea of patients wearing daily wear hydrogel (excluding daily disposable) lenses. Infiltrates that occur more towards the limbus are less severe. The incidence of CIEs is higher when contact lenses are worn overnight. Logistic analysis reveals that the risk of developing a severe CIE is five times greater with conventional hydrogel extended wear versus silicone hydrogel extended wear. The male gender, smoking, a healthy eye and body, and the late Winter months are associated with an increased risk of developing CIEs. The rate of significant visual loss as a result of developing a CIE is low. Two key conclusions are drawn from this work, which represent a radical rethinking of this potentially sight-threatening condition. CIEs should be

  12. Graphene plasmonic lens for manipulating energy flow

    NASA Astrophysics Data System (ADS)

    Wang, Guoxi; Liu, Xueming; Lu, Hua; Zeng, Chao

    2014-02-01

    Manipulating the energy flow of light is at the heart of modern information and communication technologies. Because photons are uncharged, it is still difficult to effectively control them by electrical means. Here, we propose a graphene plasmonic (GP) lens to efficiently manipulate energy flow by elaborately designing the thickness of the dielectric spacer beneath the graphene sheet. Different from traditional metal-based lenses, the proposed graphene plasmonic lens possesses the advantages of tunability and excellent confinement of surface plasmons. It is found that the proposed lens can be utilized to focus and collimate the GP waves propagating along the graphene sheet. Particularly, the lens is dispersionless over a wide frequency range and the performance of lens can be flexibly tuned by adjusting the bias voltage. As an application of such a lens, the image transfer of two point sources with a separation of λ0/30 is demonstrated.

  13. Graphene plasmonic lens for manipulating energy flow

    PubMed Central

    Wang, Guoxi; Liu, Xueming; Lu, Hua; Zeng, Chao

    2014-01-01

    Manipulating the energy flow of light is at the heart of modern information and communication technologies. Because photons are uncharged, it is still difficult to effectively control them by electrical means. Here, we propose a graphene plasmonic (GP) lens to efficiently manipulate energy flow by elaborately designing the thickness of the dielectric spacer beneath the graphene sheet. Different from traditional metal-based lenses, the proposed graphene plasmonic lens possesses the advantages of tunability and excellent confinement of surface plasmons. It is found that the proposed lens can be utilized to focus and collimate the GP waves propagating along the graphene sheet. Particularly, the lens is dispersionless over a wide frequency range and the performance of lens can be flexibly tuned by adjusting the bias voltage. As an application of such a lens, the image transfer of two point sources with a separation of λ0/30 is demonstrated. PMID:24517981

  14. Optmization design of zoom lens systems

    NASA Astrophysics Data System (ADS)

    Li, Xiaotong; Cen, Zhaofeng

    2002-09-01

    A zoom lens system is usually composed of several components. Some of the components can be moved to change the focal length or magnification. Zoom lens system design is more complicated than fixed-focus lens design due to the moving of some components. In this paper, an optimization method that is used to design zoom lens systems is presented. Using this method, the Gaussian parameters of zoom lens systems are optimized at first, and then the initial structure parameters in each component are generated and optimized. At last the aberration balance is made using multi-configuration. In this paper the flowchart of optimization design for such complex optical systems is showed and the algorithms are described. As a conclusion, the relationship between power distribution, initial structure and the aberrations is considered at the beginning, the evaluation criteria are reliable and efficiency for designing zoom lens systems.

  15. Lateral shear interferometry with holo shear lens

    NASA Astrophysics Data System (ADS)

    Joenathan, C.; Mohanty, R. K.; Sirohi, R. S.

    1984-12-01

    A simple method for obtaining lateral shear using holo shear lenses (HSL) has been discussed. This simple device which produces lateral shears in the orthogonal directions has been used for lens testing. The holo shear lens is placed at or near the focus of the lens to be tested. It has also been shown that HSL can be used in speckle shear interferometry as it performs both the functions of shearing and imaging.

  16. Role of the lens capsule on the mechanical accommodative response in a lens stretcher

    PubMed Central

    Ziebarth, Noël M.; Borja, David; Arrieta, Esdras; Aly, Mohamed; Manns, Fabrice; Dortonne, Isabelle; Nankivil, Derek; Jain, Rakhi; Parel, Jean-Marie

    2009-01-01

    Purpose To determine if changes in elastic properties of the lens capsule ex vivo with age contribute to the forces required to accommodate. Methods Post-mortem human (n=22; age average: 41±17years, range: 6–71 years) and cynomolgus monkey (n=19; age average: 7.7±1.8 years, range: 4.2–10 years) tissues including the lens, capsule, zonules, ciliary body, and sclera were mounted in an optomechanical lens stretching system. Starting at zero load, the sclera was symmetrically stretched to 2mm in 0.25 steps at a speed of 0.1mm.s−1. The load and lens diameter were measured at each step. The lens contents were removed through a mini-capsulorhexis. The stretching cycles were repeated on the empty capsular bag. The forces required to stretch the natural lens and empty bag were quantified as a function of age and compared. Results The force required to stretch the empty lens capsule was independent of age (human=2.6–34.9g/mm [25.2–342.7mN/mm], monkey=8.2–21.3g/mm [80.3–208.6mN/mm]). The ratio of the force required to stretch the empty lens capsule to the force required to stretch the natural lens decreases with age in human and monkey lenses (p=0.003, p=0.72, respectively). Conclusions The mechanical properties of the empty lens capsule assessed ex vivo in a lens stretcher remain constant with age, suggesting that the changes in elasticity of the lens capsule do not play a significant role in presbyopia. In young eyes, the lens capsule determines the force required to stretch the whole lens. The age-related increase in force required to stretch the lens is due to changes in the lens contents. PMID:18515568

  17. Optical density of the crystalline lens

    SciTech Connect

    Hemenger, R.P.

    1982-01-01

    The optical density for the noncataractous crystalline lens is written as a sum of two terms, each with a specific dependence on wavelength. The first term, proportional to 1/lambda 2, represents all light-scattering processes in the lens. The second term, assumed significant only for lambda less than or equal to 500 nm, accounts for absorption by lens pigments. By analyzing transmittance data on lenses of subjects aged 21 to 63 years, a spectrum for light absorption by lens pigment is derived and it is shown to be essentially the same for all of the lenses.

  18. Stretchable Binary Fresnel Lens for Focus Tuning

    PubMed Central

    Li, Xueming; Wei, Lei; Poelma, René H.; Vollebregt, Sten; Wei, Jia; Urbach, Hendrik Paul; Sarro, Pasqualina M.; Zhang, Guo Qi

    2016-01-01

    This paper presents a tuneable binary amplitude Fresnel lens produced by wafer-level microfabrication. The Fresnel lens is fabricated by encapsulating lithographically defined vertically aligned carbon nanotube (CNT) bundles inside a polydimethyl-siloxane (PDMS) layer. The composite lens material combines the excellent optical absorption properties of the CNT with the transparency and stretchability of the PDMS. By stretching the elastomeric composite in radial direction, the lens focal length is tuned. Good focusing response is demonstrated and a large focus change (≥24%) was achieved by stretching lenses up to 11.4%. PMID:27139747

  19. A Magnification Lens for Interactive Volume Visualization

    SciTech Connect

    LaMar, E; Hamann, B; Joy, K I

    2001-07-19

    Volume visualization of large data sets suffers from the same problem that many other visualization modalities suffer from: either one can visualize the entire data set and lose small details or visualize a small region and lose the context. In this paper, they present a magnification lens technique for volume visualization. While the notion of a magnification-lens is not new, and other techniques attempt to simulate the physical properties of a magnifying lens, their contribution is in developing a magnification lens that is fast, can be implemented using a fairly small software overhead, and has a natural, intuitive appearance. The issue with magnification lens is the border, or transition, region. The lens center and exterior have a constant zoom factor, and are simple to render. It is the border region that blends between the external and interior magnification, and has a non-constant magnification. They use the perspective-correct textures capability, available in most current graphics systems, to produce a lens with a tessellated border region that approximates linear compression with respect to the radius of the magnification lens. They discuss how a cubic border can mitigate the discontinuities resulting from the use of a linear function, without significant performance loss. They discuss various issues concerning development of a three-dimensional magnification lens.

  20. Stretchable Binary Fresnel Lens for Focus Tuning

    NASA Astrophysics Data System (ADS)

    Li, Xueming; Wei, Lei; Poelma, René H.; Vollebregt, Sten; Wei, Jia; Urbach, Hendrik Paul; Sarro, Pasqualina M.; Zhang, Guo Qi

    2016-05-01

    This paper presents a tuneable binary amplitude Fresnel lens produced by wafer-level microfabrication. The Fresnel lens is fabricated by encapsulating lithographically defined vertically aligned carbon nanotube (CNT) bundles inside a polydimethyl-siloxane (PDMS) layer. The composite lens material combines the excellent optical absorption properties of the CNT with the transparency and stretchability of the PDMS. By stretching the elastomeric composite in radial direction, the lens focal length is tuned. Good focusing response is demonstrated and a large focus change (≥24%) was achieved by stretching lenses up to 11.4%.

  1. Endoscopic inspection using a panoramic annular lens

    NASA Technical Reports Server (NTRS)

    Gilbert, John A.; Matthys, Donald R.

    1991-01-01

    The objective of this one year study was to design, build, and demonstrate a prototype system for cavity inspection. A cylindrical view of the cavity interior was captured in real time through a compound lens system consisting of a unique panoramic annular lens and a collector lens. Images, acquired with a digitizing camera and stored in a desktop computer, were manipulated using image processing software to aid in visual inspection and qualitative analysis. A detailed description of the lens and its applications is given.

  2. Algorithm design of liquid lens inspection system

    NASA Astrophysics Data System (ADS)

    Hsieh, Lu-Lin; Wang, Chun-Chieh

    2008-08-01

    In mobile lens domain, the glass lens is often to be applied in high-resolution requirement situation; but the glass zoom lens needs to be collocated with movable machinery and voice-coil motor, which usually arises some space limits in minimum design. In high level molding component technology development, the appearance of liquid lens has become the focus of mobile phone and digital camera companies. The liquid lens sets with solid optical lens and driving circuit has replaced the original components. As a result, the volume requirement is decreased to merely 50% of the original design. Besides, with the high focus adjusting speed, low energy requirement, high durability, and low-cost manufacturing process, the liquid lens shows advantages in the competitive market. In the past, authors only need to inspect the scrape defect made by external force for the glass lens. As to the liquid lens, authors need to inspect the state of four different structural layers due to the different design and structure. In this paper, authors apply machine vision and digital image processing technology to administer inspections in the particular layer according to the needs of users. According to our experiment results, the algorithm proposed can automatically delete non-focus background, extract the region of interest, find out and analyze the defects efficiently in the particular layer. In the future, authors will combine the algorithm of the system with automatic-focus technology to implement the inside inspection based on the product inspective demands.

  3. Growth of corneal epithelial cells over in situ therapeutic contact lens after simple limbal epithelial transplantation (SLET)

    PubMed Central

    Bhalekar, Swapnil; Sangwan, Virender S; Basu, Sayan

    2013-01-01

    An 11-year-old boy underwent simple limbal epithelial transplantation (SLET) from the healthy right eye to his left eye for total limbal stem cell deficiency. One month later, corneal surface epithelialised and whitish plaques overlying the transplants were seen inferiorly. Those plaques were adherent to the surface of the contact lens and underlying corneal surface had smooth elevations. Similar findings were noted in a 23-year man following cyanoacrylate glue application for corneal perforation. On histological and immunohistochemical analysis, cells lining the contact lenses were identified as corneal epithelial cells. These cases illustrate epithelial cell growth on the contact lens and epithelial hyperplasia on corresponding surface of the cornea. Exorbitant proliferation of the epithelial cells may be owing to young age; therefore, early contact lens removal after SLET in young age, can possibly avoid epithelial hyperplasia. This also reiterates the possibility of using contact lens as a scaffold to grow epithelial cells. PMID:23814196

  4. Multilayer Laue Lens Sequence Compiler

    2005-10-01

    For the growth of a new kind of x-ray focusing optic called a multilayer Laue lens, a device is constructed in which each layer of alernating high-z and low-z is placed in the appropriate place according to the Fresnel zone plate law. This requires that each layer have a different layer thickness. Because each layer is grown using DC magnetron sputter deposition, these layer thicknesses are not only dictated by the zone plate law, butmore » are adjusted to account for various drifting in the growth chamber due to target erosion, etc.« less

  5. Multilayer Laue Lens Sequence Compiler

    SciTech Connect

    Conley, Roy; Liu, Chian

    2005-10-01

    For the growth of a new kind of x-ray focusing optic called a multilayer Laue lens, a device is constructed in which each layer of alernating high-z and low-z is placed in the appropriate place according to the Fresnel zone plate law. This requires that each layer have a different layer thickness. Because each layer is grown using DC magnetron sputter deposition, these layer thicknesses are not only dictated by the zone plate law, but are adjusted to account for various drifting in the growth chamber due to target erosion, etc.

  6. Plasmonic lens for ultraviolet wavelength

    NASA Astrophysics Data System (ADS)

    Takeda, Minoru; Tanimoto, Takuya; Inoue, Tsutomu; Aizawa, Kento

    2016-09-01

    A plasmonic lens (PL) is one of the promising photonic devices utilizing the surface plasmon wave. In this study, we have newly developed a PL with a 3.5 µm diameter for a wavelength of 375 nm (ultraviolet region). It is composed of multiple circular slit apertures milled in aluminum (Al) thin film. We have simulated the electric field distribution of the PL, and confirmed that a tightly focused beam spot of subwavelength size in the far-field region was attained. We have also measured the focusing characteristics of the PL using a near-field scanning optical microscope (NSOM) and compared them with the calculated results.

  7. Health Through the Urban Lens

    PubMed Central

    2008-01-01

    Cities are now the major sites of human habitation worldwide, a trend that will continue for the foreseeable future, not only in the developed world but in developing countries. Urban residence impacts health and health prospects both positively and negatively through a complex mix of exposures and mechanisms. In addition, cities concentrate population subsets of various demographic, economic, and social characteristics, some with particular health risks and vulnerabilities. Looking at health through the urban lens allows increased understanding of disparate risks and emphasizes the essentiality of collaborative efforts in protecting and enhancing the health of populations, especially those living in cities. PMID:18668367

  8. Notes on Linguistics, 1990.

    ERIC Educational Resources Information Center

    Notes on Linguistics, 1990

    1990-01-01

    This document consists of the four issues of "Notes on Linguistics" published during 1990. Articles in the four issues include: "The Indians Do Say Ugh-Ugh" (Howard W. Law); "Constraints of Relevance, A Key to Particle Typology" (Regina Blass); "Whatever Happened to Me? (An Objective Case Study)" (Aretta Loving); "Stop Me and Buy One (For $5...)"…

  9. Notes and Discussion

    ERIC Educational Resources Information Center

    American Journal of Physics, 1978

    1978-01-01

    Includes eleven short notes, comments and responses to comments on a variety of topics such as uncertainty in a least-squares fit, display of diffraction patterns, the dark night sky paradox, error in the dynamics of deformable bodies and relative velocities and the runner. (GA)

  10. NCTM Student Math Notes.

    ERIC Educational Resources Information Center

    Maletsky, Evan, Ed.; Yunker, Lee E., Ed.

    1986-01-01

    Five sets of activities for students are included in this document. Each is designed for use in junior high and secondary school mathematics instruction. The first Note concerns mathematics on postage stamps. Historical procedures and mathematicians, metric conversion, geometric ideas, and formulas are among the topics considered. Successful…

  11. Notes on Linguistics, 1999.

    ERIC Educational Resources Information Center

    Payne, David, Ed.

    1999-01-01

    The 1999 issues of "Notes on Linguistics," published quarterly, include the following articles, review articles, reviews, book notices, and reports: "A New Program for Doing Morphology: Hermit Crab"; "Lingualinks CD-ROM: Field Guide to Recording Language Data"; "'Unruly' Phonology: An Introduction to Optimality Theory"; "Borrowing vs. Code…

  12. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard; Day, John H. (Technical Monitor)

    2001-01-01

    This report will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will continue a series of notes concentrating on analysis techniques with this issue's section discussing the use of Root-Sum-Square calculations for digital delays.

  13. Sawtooth Functions. Classroom Notes

    ERIC Educational Resources Information Center

    Hirst, Keith

    2004-01-01

    Using MAPLE enables students to consider many examples which would be very tedious to work out by hand. This applies to graph plotting as well as to algebraic manipulation. The challenge is to use these observations to develop the students' understanding of mathematical concepts. In this note an interesting relationship arising from inverse…

  14. Student Math Notes.

    ERIC Educational Resources Information Center

    Maletsky, Evan, Ed.

    1985-01-01

    Five sets of activities for students are included in this document. Each is designed for use in junior high and secondary school mathematics instruction. The first "Note" concerns magic squares in which the numbers in every row, column, and diagonal add up to the same sum. An etching by Albrecht Durer is presented, with four questions followed by…

  15. Estimating transient freshwater lens dynamics for atoll islands of the Maldives

    NASA Astrophysics Data System (ADS)

    Bailey, Ryan T.; Khalil, Abedalrazq; Chatikavanij, Vansa

    2014-07-01

    The water resources of the atolls of the Republic of the Maldives are under continual threat from climatic and anthropogenic stresses, such as changing rainfall patterns, sea-level rise, and contamination from human activities and climatic events. Groundwater, a historically important resource of the island communities of the Maldives, is particularly affected due to the fragile nature of the freshwater lens on small atoll islands. In this study the dynamics of the freshwater lens are simulated during an extended (1998-2011) time period to determine the fluctuation of lens thickness of islands of the Maldives in response to annual and long-term changes in rainfall. Particularly, maximum and minimum lens thickness during the simulation period are assessed, as well as the occurrence of general trends, either decreasing or increasing, in lens thickness. Simulations are performed for a variety of island sizes, corresponding to the range of sizes of the islands of the Maldives, and for the various climatic regions of the Maldives. Results indicate that many of the atoll islands are expected to have a measurable freshwater lens during the majority of a long-term climatic period, although significant decreases in thickness can occur during the months of the dry season, with complete depletion occurring for small islands. Of particular note is the observation of a general decrease in lens thickness, approximately 2-4 cm/yr, over the 14-year period for the northern regions of the Maldives. If continued at current rates, these trends can have a significant impact on groundwater resources for the Maldives. Results imply that fresh groundwater, if properly protected from land surface-derived contamination and over-pumping and associated salinization, can be a valuable source of water for the Maldives, particularly for the larger islands. Overall, results provide water resource managers and government officials with valuable data for consideration in water security measures.

  16. Change of optical design thought about focusing of zoom lens

    NASA Astrophysics Data System (ADS)

    Hagimori, Hitoshi

    2015-09-01

    Zoom lens has been developed around lens applications of consumer still camera and TV broadcast cameras from about 1960s. Among, zoom lens as an interchangeable lens of a single-lens camera has made the most significant evolution in technically. In this paper, I describe the change of optical design concept about focusing function in zoom lens including introduction of some topic specific lenses.

  17. Mechanically tunable photonic crystal lens

    NASA Astrophysics Data System (ADS)

    Cui, Y.; Tamma, V. A.; Lee, J.-B.; Park, W.

    2010-08-01

    We designed, fabricated and characterized MEMS-enabled mechanically-tunable photonic crystal lens comprised of 2D photonic crystal and symmetrical electro-thermal actuators. The 2D photonic crystal was made of a honeycomb-lattice of 340 nm thick, 260 nm diameter high-index silicon rods embedded in low-index 10 μm thick SU-8 cladding. Silicon input waveguide and deflection block were also fabricated for light in-coupling and monitoring of focused spot size, respectively. When actuated, the electro-thermal actuators induced mechanical strain which changed the lattice constant of the photonic crystal and consequently modified the photonic band structure. This in turn modified the focal-length of the photonic crystal lens. The fabricated device was characterized using a tunable laser (1400~1602 nm) and an infrared camera during actuation. At the wavelength of 1450 nm, the lateral light spot size observed at the deflection block gradually decreased 40%, as applied current increased from 0 to 0.7 A, indicating changes in focal length in response to the mechanical stretching.

  18. Fabricating customized hydrogel contact lens

    PubMed Central

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-01-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies. PMID:27748361

  19. Fabricating customized hydrogel contact lens

    NASA Astrophysics Data System (ADS)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  20. Impedance of the amphibian lens.

    PubMed

    Duncan, G; Patmore, L; Pynsent, P B

    1981-03-01

    1. The electrical resistance of the perfused frog lens was measured using separate internal current passing and voltage measuring electrodes. 2. The resistance values obtained using voltage clamp and direct and alternating current techniques were in good agreement. 3. The voltage transients induced in response to current steps were multi-exponential in form. Increasing the external K concentration reduced both the amplitude of the voltage response and the rise time. 4. The impedance characteristics were investigated in more detail using alternating current analysis techniques. 5. In an equivalent-circuit modelling study it was assumed that there were two major pathways for current flow in the lens. The first through the surface membranes and the second through the inner fibre membranes via the narrow extracellular spaces. 6. The experimental impedance loci could not be adequately fitted by a simple two time constant model and a third time constant was introduced which may represent diffusion polarization effects in the extracellular spaces. 7. The three time constant model gave good and consistent fits to impedance data from a number of preparations. 8. The form of the impedance loci was also dependent on the external K concentration, but the only fitted parameter which changed consistently with external K was the surface membrane resistance (Rs).

  1. Impedance of the amphibian lens.

    PubMed Central

    Duncan, G; Patmore, L; Pynsent, P B

    1981-01-01

    1. The electrical resistance of the perfused frog lens was measured using separate internal current passing and voltage measuring electrodes. 2. The resistance values obtained using voltage clamp and direct and alternating current techniques were in good agreement. 3. The voltage transients induced in response to current steps were multi-exponential in form. Increasing the external K concentration reduced both the amplitude of the voltage response and the rise time. 4. The impedance characteristics were investigated in more detail using alternating current analysis techniques. 5. In an equivalent-circuit modelling study it was assumed that there were two major pathways for current flow in the lens. The first through the surface membranes and the second through the inner fibre membranes via the narrow extracellular spaces. 6. The experimental impedance loci could not be adequately fitted by a simple two time constant model and a third time constant was introduced which may represent diffusion polarization effects in the extracellular spaces. 7. The three time constant model gave good and consistent fits to impedance data from a number of preparations. 8. The form of the impedance loci was also dependent on the external K concentration, but the only fitted parameter which changed consistently with external K was the surface membrane resistance (Rs). PMID:6973626

  2. Contact lens sensors in ocular diagnostics.

    PubMed

    Farandos, Nicholas M; Yetisen, Ali K; Monteiro, Michael J; Lowe, Christopher R; Yun, Seok Hyun

    2015-04-22

    Contact lenses as a minimally invasive platform for diagnostics and drug delivery have emerged in recent years. Contact lens sensors have been developed for analyzing the glucose composition of tears as a surrogate for blood glucose monitoring and for the diagnosis of glaucoma by measuring intraocular pressure. However, the eye offers a wider diagnostic potential as a sensing site and therefore contact lens sensors have the potential to improve the diagnosis and treatment of many diseases and conditions. With advances in polymer synthesis, electronics and micro/nanofabrication, contact lens sensors can be produced to quantify the concentrations of many biomolecules in ocular fluids. Non- or minimally invasive contact lens sensors can be used directly in a clinical or point-of-care setting to monitor a disease state continuously. This article reviews the state-of-the-art in contact lens sensor fabrication, their detection, wireless powering, and readout mechanisms, and integration with mobile devices and smartphones. High-volume manufacturing considerations of contact lenses are also covered and a case study of an intraocular pressure contact lens sensor is provided as an example of a successful product. This Review further analyzes the contact lens market and the FDA regulatory requirements for commercialization of contact lens sensors.

  3. Analysis of a Thin Optical Lens Model

    ERIC Educational Resources Information Center

    Ivchenko, Vladimir V.

    2011-01-01

    In this article a thin optical lens model is considered. It is shown that the limits of its applicability are determined not only by the ratio between the thickness of the lens and the modules of the radii of curvature, but above all its geometric type. We have derived the analytical criteria for the applicability of the model for different types…

  4. Mathematical Lens: How Much Can You Bench?

    ERIC Educational Resources Information Center

    Bolognese, Chris A.

    2013-01-01

    "How Much Can You Bench?" appears in the "Mathematical Lens" section of "Mathematics Teacher." "Mathematical Lens" uses photographs as a springboard for mathematical inquiry and appears in every issue of "Mathematics Teacher." This month the mathematics behind the photograph includes finding areas…

  5. A Fisheye Lens for Many Point PDV

    SciTech Connect

    Frogget, B.

    2011-11-01

    The features of the fisheye lens are illustrated, including a design with reflector prisms. The fisheye fiber map and the beam footprint are shown. Fisheye rough-angle metrology was done and results presented. Next steps are given, including a smaller top fisheye lens element, longer reflector prisms with better mounting, and different fiber arrangements.

  6. Mathematical Lens: Iron Gate, Metulla, Israel

    ERIC Educational Resources Information Center

    Mathematics Teacher, 2005

    2005-01-01

    The "Mathematical Lens" feature of "Mathematics Teacher," uses photographs as a springboard for mathematical inquiry. The goal of this feature is to encourage readers to see patterns and relationships that they can think about and extend in a mathematically playful way. In this edition of "Mathematical Lens," students analyze the shapes in an iron…

  7. 4. Panama Mount. Note concrete ring and metal rail. Note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Panama Mount. Note concrete ring and metal rail. Note cliff erosion under foundation at left center. Looking 297° W. - Fort Funston, Panama Mounts for 155mm Guns, Skyline Boulevard & Great Highway, San Francisco, San Francisco County, CA

  8. Explosive plane-wave lens

    DOEpatents

    Marsh, S.P.

    1988-03-08

    An explosive plane-wave air lens which enables a spherical wave form to be converted to a planar wave without the need to specially machine or shape explosive materials is described. A disc-shaped impactor having a greater thickness at its center than around its periphery is used to convert the spherical wave into a plane wave. When the wave reaches the impactor, the center of the impactor moves first because the spherical wave reaches the center of the impactor first. The wave strikes the impactor later in time as one moves radially along the impactor. Because the impactor is thinner as one moves radially outward, the velocity of the impactor is greater at the periphery than at the center. An acceptor explosive is positioned so that the impactor strikes the acceptor simultaneously. Consequently, a plane detonation wave is propagated through the acceptor explosive. 4 figs.

  9. Explosive plane-wave lens

    DOEpatents

    Marsh, Stanley P.

    1988-01-01

    An explosive plane-wave air lens which enables a spherical wave form to be converted to a planar wave without the need to specially machine or shape explosive materials is described. A disc-shaped impactor having a greater thickness at its center than around its periphery is used to convert the spherical wave into a plane wave. When the wave reaches the impactor, the center of the impactor moves first because the spherical wave reaches the center of the impactor first. The wave strikes the impactor later in time as one moves radially along the impactor. Because the impactor is thinner as one moves radially outward, the velocity of the impactor is greater at the periphery than at the center. An acceptor explosive is positioned so that the impactor strikes the acceptor simultaneously. Consequently, a plane detonation wave is propagated through the acceptor explosive.

  10. Explosive plane-wave lens

    DOEpatents

    Marsh, S.P.

    1987-03-12

    An explosive plane-wave air lens which enables a spherical wave form to be converted to a planar wave without the need to specially machine or shape explosive materials is described. A disc-shaped impactor having a greater thickness at its center than around its periphery is used to convert the spherical wave into a plane wave. When the wave reaches the impactor, the center of the impactor moves first because the spherical wave reaches the center of the impactor first. The wave strikes the impactor later in time as one moves radially along the impactor. Because the impactor is thinner as one moves radially outward, the velocity of the impactor is greater at the periphery than at the center. An acceptor explosive is positioned so that the impactor strikes the acceptor simultaneously. Consequently, a plane detonation wave is propagated through the acceptor explosive. 3 figs., 3 tabs.

  11. Studies on contact lens materials.

    PubMed

    Alyanak, H; Aksoy, S; Hasirci, N

    1991-02-01

    The development of plastics with the optical properties of glass led promptly to their use as contact lenses and intra-ocular lenses to rectify certain visual defects. Research to improve these polymeric materials is continuous but there is not much in the literature since most of the findings are patented. In this work, polymethyl methacrylate, the most commonly used lens material was chosen as the base material and its co and terpolymers were prepared using 2-hydroxyethyl methacrylate, N-vinyl-2-pyrrolidinone, hexamethyl disiloxane, and polypropylene glycol. The transparency, refractive index, contact angle, density, equilibrium water content, and percent hydration properties were examined. Theoretical values were calculated for linear expansion and oxygen permeation from the density and hydration values.

  12. Variable focus crystal diffraction lens

    SciTech Connect

    Smither, R.K.

    1988-11-01

    A new method has been developed to control the shape of the surface of a diffracting crystal that will allow it to function as a variable focus crystal diffraction lens, for focusing photon beams from a synchrotron source. The new method uses thermal gradients in the crystal to control the shape of the surface of the crystal in two dimensions and allows one to generate both spherical and ellipsoidal surface shapes. In this work the thermal gradient was generated by core drilling two sets of cooling channels in a silicon crystal so that cooling or heating fluids could be circulated through the crystal at two different levels. The first set of channels is close to the surface of the crystal where the photon beam strikes it. The second set of channels is equal distant from the back surface. If a concave surface is desired, the fluid in the channels just below the surface exposed to the beam is cooler than the fluid circulating through the channels near the back surface. If a convex surface is desired, then the cooling fluid in the upper channels near the surface exposed to the incident photon beam, is warmer than the fluid in the lower channels. The focal length of the crystal lens is varied by varying the thermal gradient in the crystal. This approach can also be applied to the first crystal in a high power synchrotron beam line to eliminate the bowing and other thermal distortions of the crystal caused by the high heat load. 6 refs., 8 figs., 3 tabs.

  13. Microbial contamination of contact lens storage cases and domestic tap water of contact lens wearers.

    PubMed

    Üstüntürk, Miray; Zeybek, Zuhal

    2012-11-01

    Contact lenses have been widely used as an alternative to spectacles both in developed and developing countries. However, under certain circumstances, adverse responses can occur during contact lens wear and several microorganisms--including bacteria, fungi, and free living amoebae--can cause several eye infections in wearers. Extended wear of contact lenses is the major risk factor of eye infections such as microbial keratitis, besides contaminated contact lens storage case, contaminated lens care solutions, and inaccurate contact lens handling. In this study, we collected contact lens storage case and domestic tap water samples from 50 asymptomatic contact lens wearers. We determined that total aerobic mesophilic bacteria were isolated in 45 (90 %), Gram negative rod bacteria were isolated in 20 (40 %), Pseudomonas spp. were isolated in 2 (4 %) and fungi were isolated in 18 (36 %) out of 50 contact lens storage cases. Free living amoebae were not detected in investigated contact lens storage cases. At the same time, out of 50, total aerobic mesophilic bacteria were isolated in 34 (68 %), fungi were isolated in 15 (30 %) and free living amoebae were isolated in 15 (30 %) domestic tap water samples. No Gram-negative rod bacteria and Pseudomonas spp. were detected in investigated water samples. Two contact lens case samples and two tap water samples were excluded from the analysis for Pseudomonas spp. for technical reasons. According to our findings, inadequate contact lens maintenance during lens wear may result in the contamination of contact lens storage cases. This situation can lead to severe eye infections in contact lens wearers over time.

  14. Note-Taking: Different Notes for Different Research Stages.

    ERIC Educational Resources Information Center

    Callison, Daniel

    2003-01-01

    Explains the need to teach students different strategies for taking notes for research, especially at the exploration and collecting information stages, based on Carol Kuhlthau's research process. Discusses format changes; using index cards; notes for live presentations or media presentations versus notes for printed sources; and forming focus…

  15. Singlet mega-pixel resolution lens

    NASA Astrophysics Data System (ADS)

    Lin, Chen-Hung; Lin, Hoang Yan; Chang, Horng

    2008-03-01

    There always exist some new challenges for lens designers to keep their old-line technology update. To minimize lens volume is one of the most notified examples. In this paper we designed a single thick lens, constructed by using one oblique (reflective) surface, apart from two conventional refractive surfaces, to bend the optical path of the optical system to achieve this goal. Detail design procedure, including system layout and lens performance diagrams, will be presented. Following the first order layout, we applied aspherical form to the two refractive surfaces in order to correct the spherical aberration up to an acceptable condition. Then, the reduced aberrations such as coma, astigmatism, field curvature and distortion can easily be corrected with some calculations related to spherical aberration as shown in the publication of H. H. Hopkins (1950). Plastic material is used in the design, because the aspherical surfaces can then be manufactured in a more cost effective way. The final specification of the design is: EFL is 4.6 mm, the F number is 2.8, the over all thickness of lens is 3.6 mm, its MTF is 0.3 at 227 lp/mm in center field and chief ray angle is less than 15 degrees. Lens data as well as optical performance curves are also presented in the paper. In conclusion we have successfully finished a mega-pixel resolution lens design and its overall thickness is compatible with the state of the art.

  16. Microindentation of the young porcine ocular lens.

    PubMed

    Reilly, Matthew; Ravi, Nathan

    2009-04-01

    Debate regarding the mechanisms of how the eye changes focus (accommodation) and why this ability is lost with age (presbyopia) has recently been rejoined due to the advent of surgical procedures for the correction of presbyopia. Due to inherent confounding factors in both in vivo and in vitro measurement techniques, mechanical modeling of the behavior of the ocular lens in accommodation has been attempted to settle the debate. However, a paucity of reliable mechanical property measurements has proven problematic in the development of a successful mechanical model of accommodation. Instrumented microindentation was utilized to directly measure the local elastic modulus and dynamic response at various locations in the lens. The young porcine lens exhibits a large modulus gradient with the highest modulus appearing at the center of the nucleus and exponentially decreasing with distance. The loss tangent was significantly higher in the decapsulated lens and the force waveform amplitude decreased significantly upon removal of the lens capsule. The findings indicate that localized measurements of the lens' mechanical properties are necessary to achieve accurate quantitative parameters suitable for mechanical modeling efforts. The results also indicate that the lens behaves as a crosslinked gel rather than as a collection of individual arched fiber cells.

  17. Tear analysis in contact lens wearers.

    PubMed Central

    Farris, R L

    1985-01-01

    Tear analysis in contact lens wearers was compared with tear analysis in aphakics without contact lens wear and normal phakic patients. Subjects were divided into five groups: group 1, aphakic without contact lens; group 2, phakic with daily-wear hard contact lens; group 3, phakic with daily-wear soft contact lens; group 4, phakic with extended-wear soft contact lens; and group 5, aphakic with extended-wear soft contact lens. The experimental groups were compared with age- and sex-matched control groups for statistical analysis of tear variables by means of the Student's t-test. The variables measured were tear osmolarity, tear albumin, and lysozyme and lactoferrin concentrations in basal and reflex tears. Highly significant elevations of tear osmolarity were found in aphakic subjects without contact lenses. Less significant differences in tear osmolarity were found in phakic subjects with hard daily-wear lenses or with extended-wear soft lenses. Tear albumin, lysozyme, and lactoferrin in basal and reflex tears were not significantly different in the different groups of contact lens wearers or in the group of aphakic subjects without contact lenses compared with their control groups. Individual variations in tear albumin, lysozyme, and lactoferrin appeared to be responsible for the inability to demonstrate significant differences in tear composition in association with the wearing of different types of contact lenses. Older and aphakic patients demonstrated a tendency to have increased concentrations of proteins in the tears compared with younger, phakic contact lens wearers and normal controls without contact lenses. PMID:3914131

  18. The elastic constants of the human lens.

    PubMed

    Fisher, R F

    1971-01-01

    1. When the lens is spun around its antero-posterior polar axis in an apparatus designed for the purpose, high speed photography can be used to record its changing profile. By this method a variable radial centrifugal force can be applied to the lens which mimics the pull of the zonule.2. If the lens is not stressed at its centre beyond 100 Nm(-2) it behaves as a truly elastic body. When stressed beyond this limit visco-elastic strain is produced at its poles.3. The human lens has isotropic elastic properties at the extremes of life, but at the other times Young's Modulus of Elasticity varies with the direction in which it is measured.4. Young's Modulus of Elasticity of the lens varies with age, polar elasticity and equatorial elasticity, at birth being 0.75 x 10(3) and 0.85 x 10(3) Nm(-2) respectively, while at 63 years of age both are equal to 3 x 10(3) Nm(-2).5. A comparison of Young's Modulus of the young human lens with that of the rabbit and cat shows that the polar elasticity of the lenses of these animals was 5 times greater in the young rabbit, and 21 times greater in the adult cat. Equatorial elasticities of the rabbit and human lens were equal, while in the cat the equatorial elasticity was four times greater.6. A mathematical model showing the lens substance possessing a nucleus of lower isotropic elasticity than that of the isotropic elastic cortex surrounding it, accounts for the difference between polar and equatorial elasticity of the intact adult lens.7. The implications of these findings are discussed in relation to:(i) accommodation and the rheological properties of the lens;(ii) possible differences in the physical state of the lenticular proteins in the cortex and nucleus which may account for the senile variations in Young's Modulus of Elasticity in these regions of the lens;(iii) the loss of accommodation due solely to an increase in Young's Modulus of Elasticity of the lens between the ages of 15 and 60. This would amount to 44% of the total

  19. Negative refraction makes a perfect lens

    PubMed

    Pendry

    2000-10-30

    With a conventional lens sharpness of the image is always limited by the wavelength of light. An unconventional alternative to a lens, a slab of negative refractive index material, has the power to focus all Fourier components of a 2D image, even those that do not propagate in a radiative manner. Such "superlenses" can be realized in the microwave band with current technology. Our simulations show that a version of the lens operating at the frequency of visible light can be realized in the form of a thin slab of silver. This optical version resolves objects only a few nanometers across.

  20. Negative Refraction Makes a Perfect Lens

    NASA Astrophysics Data System (ADS)

    Pendry, J. B.

    2000-10-01

    With a conventional lens sharpness of the image is always limited by the wavelength of light. An unconventional alternative to a lens, a slab of negative refractive index material, has the power to focus all Fourier components of a 2D image, even those that do not propagate in a radiative manner. Such ``superlenses'' can be realized in the microwave band with current technology. Our simulations show that a version of the lens operating at the frequency of visible light can be realized in the form of a thin slab of silver. This optical version resolves objects only a few nanometers across.

  1. Gravitational lens time delays and gravitational waves

    SciTech Connect

    Frieman, J.A. Department of Astronomy Astrophysics, University of Chicago, Chicago, Illinois 60637 ); Harari, D.D.; Surpi, G.C. )

    1994-10-15

    Using Fermat's principle, we analyze the effects of very long wavelength gravitational waves upon the images of a gravitationally lensed quasar. We show that the lens equation in the presence of gravity waves is equivalent to that of a lens with a different alignment between source, deflector, and observer in the absence of gravity waves. Contrary to a recent claim, we conclude that measurements of time delays in gravitational lenses cannot serve as a method to detect or constrain a stochastic background of gravitational waves of cosmological wavelengths, because the wave-induced time delay is observationally indistinguishable from an intrinsic time delay due to the lens geometry.

  2. Lens-Free Imaging for Biological Applications

    PubMed Central

    Kim, Sang Bok; Bae, Hojae; Koo, Kyo-in; Dokmeci, Mehmet R.; Ozcan, Aydogan; Khademhosseini, Ali

    2013-01-01

    Lens-free (or lensless) imaging is emerging as a cost-effective, compact, and lightweight detection method that can serve numerous biological applications. Lens-free imaging can generate high-resolution images within a field-portable platform, which is ideal for affordable point-of-care devices aiming at resource-limited settings. In this mini-review, we first describe different modes of operation for lens-free imaging and then highlight several recent biological applications of this emerging platform technology. PMID:22357607

  3. The elastic constants of the human lens

    PubMed Central

    Fisher, R. F.

    1971-01-01

    1. When the lens is spun around its antero-posterior polar axis in an apparatus designed for the purpose, high speed photography can be used to record its changing profile. By this method a variable radial centrifugal force can be applied to the lens which mimics the pull of the zonule. 2. If the lens is not stressed at its centre beyond 100 Nm-2 it behaves as a truly elastic body. When stressed beyond this limit visco-elastic strain is produced at its poles. 3. The human lens has isotropic elastic properties at the extremes of life, but at the other times Young's Modulus of Elasticity varies with the direction in which it is measured. 4. Young's Modulus of Elasticity of the lens varies with age, polar elasticity and equatorial elasticity, at birth being 0·75 × 103 and 0·85 × 103 Nm-2 respectively, while at 63 years of age both are equal to 3 × 103 Nm-2. 5. A comparison of Young's Modulus of the young human lens with that of the rabbit and cat shows that the polar elasticity of the lenses of these animals was 5 times greater in the young rabbit, and 21 times greater in the adult cat. Equatorial elasticities of the rabbit and human lens were equal, while in the cat the equatorial elasticity was four times greater. 6. A mathematical model showing the lens substance possessing a nucleus of lower isotropic elasticity than that of the isotropic elastic cortex surrounding it, accounts for the difference between polar and equatorial elasticity of the intact adult lens. 7. The implications of these findings are discussed in relation to: (i) accommodation and the rheological properties of the lens; (ii) possible differences in the physical state of the lenticular proteins in the cortex and nucleus which may account for the senile variations in Young's Modulus of Elasticity in these regions of the lens; (iii) the loss of accommodation due solely to an increase in Young's Modulus of Elasticity of the lens between the ages of 15 and 60. This would amount to 44% of the

  4. Electrowetting based infrared lens using ionic liquids

    NASA Astrophysics Data System (ADS)

    Hu, Xiaodong; Zhang, Shiguo; Liu, Yu; Qu, Chao; Lu, Liujin; Ma, Xiangyuan; Zhang, Xiaoping; Deng, Youquan

    2011-11-01

    We demonstrated an infrared variable focus ionic liquids lens using electrowetting, which could overcome the problems caused by use of water, e.g., evaporation and poor thermostability, while keeping good optical transparency in visible light and near-infrared region. Besides, the type of lens (convex or concave) could be tuned by applied voltage or refractive index of ILs used, and the transmittance was measured to exceed 90% over the spectrum of visible light and near-infrared. We believe this infrared variable focus ionic liquids lens has a great application prospect in both visible light and infrared image systems.

  5. Development of a tantalum pentoxide Luneberg lens

    NASA Technical Reports Server (NTRS)

    Bryan, D. A.; Chubb, C. R.; Powers, J. K.; Reed, W. R.; Dalke, E. A.; Tomaschke, H. E.

    1982-01-01

    A process has been developed for the fabrication of a tantalum pentoxide waveguide Luneburg lens as the input collimator for an optical signal processing circuit on a silicon substrate, such as an integrated wavelength demultiplexer. The development of such a lens involved improvement of the deposition mask profile, reduction of surface scattering by underlaying the lens, reduction of edge scattering by using shims under the mask, and prediction and measurement of the TE-TM polarization aberration. It is shown that polarization aberration significantly affects the design of a demultiplexer system.

  6. 21 CFR 886.1390 - Flexible diagnostic Fresnel lens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Flexible diagnostic Fresnel lens. 886.1390 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1390 Flexible diagnostic Fresnel lens. (a) Identification. A flexible diagnostic Fresnel lens is a device that is a very thin lens which...

  7. 21 CFR 886.1390 - Flexible diagnostic Fresnel lens.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Flexible diagnostic Fresnel lens. 886.1390 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1390 Flexible diagnostic Fresnel lens. (a) Identification. A flexible diagnostic Fresnel lens is a device that is a very thin lens which...

  8. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    PubMed

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p < 0.03) versus control (no intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p < 0.03) and increased expression of α-smooth muscle actin in HLE B-3 after six days, although only poly(2-hydroxyethyl methacrylate) induced a significant difference versus control (p < 0.01). Our results imply that-contrary to prior uveal biocompatibility understanding-macrophage adherence is not necessary for a strong inflammatory response to an intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal

  9. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    PubMed

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p < 0.03) versus control (no intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p < 0.03) and increased expression of α-smooth muscle actin in HLE B-3 after six days, although only poly(2-hydroxyethyl methacrylate) induced a significant difference versus control (p < 0.01). Our results imply that-contrary to prior uveal biocompatibility understanding-macrophage adherence is not necessary for a strong inflammatory response to an intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal

  10. Luneburg and flat lens based on graded photonic crystal

    NASA Astrophysics Data System (ADS)

    Liu, Wei; Sun, Xiaohong; Gao, Minglei; Wang, Shuai

    2016-04-01

    Square-lattice graded photonic crystals employed for designing Luneburg and Flat Lens is presented. Comparable simulation of the Luneburg lens with TE and TM polarizations predicts that TM lens possesses of enlarged transmission bandwidth and strengthened focusing ability, in comparison with TE lens. As a typical simplified counterpart, the evolution of focusing intensity and numerical aperture of the flat lens is achieved. What is more, those Luneburg and Flat Lens can withstand imperfect gradients in structure design. This will provide a guidance to produce a high quality focusing lens with small size, short focal length and large numerical aperture applied in the integrated photonic devices.

  11. Bionic intraocular lens with variable focus and integrated structure

    NASA Astrophysics Data System (ADS)

    Liang, Dan; Wang, Xuan-Yin; Du, Jia-Wei; Xiang, Ke

    2015-10-01

    This paper proposes a bionic accommodating intraocular lens (IOL) for ophthalmic surgery. The designed lens has a solid-liquid mixed integrated structure, which mainly consists of a support ring, elastic membrane, rigid lens, and optical liquid. The lens focus can be adjusted through the deformation of the lens front surface when compressed. The integrated structure of the IOL is presented, as well as a detailed description of the lens materials and fabrication process. Images under different radial pressures are captured, and the lens deformation process, accommodating range, density, and optical property are analyzed. The designed lens achieves a 14.6 D accommodating range under a radial pressure of 51.4 mN and a 0.24 mm alteration of the lens outer radius. The deformation property of the lens matches well with the characteristic of the eye and shows the potential to help patients fully recover their vision accommodation ability after the cataract surgery.

  12. Bilateral lens luxation and intracapsular lens extractions in a Matshchie's tree kangaroo.

    PubMed

    McLean, Nancy Johnstone; Zimmerman, Ralph

    2015-01-01

    An adult, female, captive, Matshchie's tree kangaroo was diagnosed with an anterior lens luxation in the right eye and a lens subluxation in the left eye. Both eyes were treated surgically with intracapsular lens extractions. A 360° rhegmatogenous retinal detachment was diagnosed 6 months postoperatively in the left eye. Aphakic vision was maintained in the right eye 9 months postoperatively. Based on family history and the lack of antecedent ocular disease, the lens luxations were presumed to be inherited and veterinarians should be aware of this condition within the captive tree kangaroo population.

  13. Bilateral lens luxation and intracapsular lens extractions in a Matshchie's tree kangaroo.

    PubMed

    McLean, Nancy Johnstone; Zimmerman, Ralph

    2015-01-01

    An adult, female, captive, Matshchie's tree kangaroo was diagnosed with an anterior lens luxation in the right eye and a lens subluxation in the left eye. Both eyes were treated surgically with intracapsular lens extractions. A 360° rhegmatogenous retinal detachment was diagnosed 6 months postoperatively in the left eye. Aphakic vision was maintained in the right eye 9 months postoperatively. Based on family history and the lack of antecedent ocular disease, the lens luxations were presumed to be inherited and veterinarians should be aware of this condition within the captive tree kangaroo population. PMID:25135107

  14. RISK FACTORS FOR CONTACT LENS INDUCED PAPILLARY CONJUNCTIVITIS ASSOCIATED WITH SILICONE HYDROGEL CONTACT LENS WEAR

    PubMed Central

    Tagliaferri, Angela; Love, Thomas E.; Szczotka-Flynn, Loretta

    2014-01-01

    BACKGROUND Contact lens induced papillary conjunctivitis (CLPC) continues to be a major cause of dropout during contact lens extended wear. This retrospective study explores risk factors for the development of CLPC during silicone hydrogel lens extended wear. METHODS Data from 205 subjects enrolled in the Longitudinal Analysis of Silicone Hydrogel Contact Lens (LASH) study wearing lotrafilcon A silicone hydrogel lenses for up to 30 days of continuous wear were used to determine risk factors for CLPC in this secondary analysis of the main cohort. The main covariates of interest included substantial lens-associated bacterial bioburden, and topographically determined lens base curve-to-cornea fitting relationships. Additional covariates of interest included history of prior adverse events, time of year, race, education level, gender and other subject demographics. Statistical analyses included univariate logistic regression to assess the impact of potential risk factors on the binary CLPC outcome, and Cox proportional hazards regression to describe the impact of those factors on time-to-CLPC diagnosis. RESULTS Across 12 months of follow-up, 52 subjects (25%) experienced CLPC. No associations were found between CLPC development and the presence of bacterial bioburden, lens-to-cornea fitting relationships, history of prior adverse events, gender or race. CLPC development followed the same seasonal trends as the local peaks in environmental allergans. CONCLUSIONS Lens fit and biodeposits, in the form of lens associated bacterial bioburden, were not associated with the development of CLPC during extended wear with lotrafilcon A silicone hydrogel lenses. PMID:24681609

  15. A Plasma Lens for Magnetron Sputtering

    SciTech Connect

    Anders, Andre; Brown, Jeff

    2010-11-30

    A plasma lens, consisting of a solenoid and potential-defining ring electrodes, has been placed between a magnetron and substrates to be coated. Photography reveals qualitative information on excitation, ionization, and the transport of plasma to the substrate.

  16. Perfect lens makes a perfect trap.

    PubMed

    Lu, Zhaolin; Murakowski, Janusz; Schuetz, Christopher A; Shi, Shouyuan; Schneider, Garrett J; Samluk, Jesse P; Prather, Dennis W

    2006-03-20

    In this work, we present for the first time a new and realistic application of the "perfect lens", namely, electromagnetic traps (or tweezers). We combined two recently developed techniques, 3D negative refraction flat lenses (3DNRFLs) and optical tweezers, and experimentally demonstrated the very unique advantages of using 3DNRFLs for electromagnetic traps. Super-resolution and short focal distance of the flat lens result in a highly focused and strongly convergent beam, which is a key requirement for a stable and accurate electromagnetic trap. The translation symmetry of 3DNRFL provides translation-invariance for imaging, which allows an electromagnetic trap to be translated without moving the lens, and permits a trap array by using multiple sources with a single lens. Electromagnetic trapping was demonstrated using polystyrene particles in suspension, and subsequent to being trapped to a single point, they were then accurately manipulated over a large distance by simple movement of a 3DNRFL-imaged microwave monopole source.

  17. Methane Detector With Plastic Fresnel Lens

    NASA Technical Reports Server (NTRS)

    Grant, W. B.

    1986-01-01

    Laser detector for natural gas leaks modified by substitution of molded plastic lens for spherical mirror. By measuring relative attenuation at two wavelengths, detector used to check for methane escaping from pipelines above or below ground and from landfill.

  18. Optical switch based on electrowetting liquid lens

    NASA Astrophysics Data System (ADS)

    Li, Lei; Liu, Chao; Peng, Hua-Rong; Wang, Qiong-Hua

    2012-05-01

    In this paper, we propose an optical switch based on an electrowetting liquid lens. The device consists of an electrowetting liquid lens and a non-transparent cap with a pin hole. When the lens is actuated to be positive, the incident light can be converged on the pin hole and pass through the hole with less attenuation. When the lens is deformed to be negative, the incident light is diverged and most of light is blocked by the cap. Our results show that the system can provide high contrast ratio (˜800:1) and reasonable response time (˜88 ms). The proposed optical switch has potential application in light shutters, variable optical attenuators, and adaptive irises.

  19. Avoiding liability in contact lens practice.

    PubMed

    Classé, J G

    1994-01-01

    Contact lens practice is the leading source of liability claims involving optometrists. Claims most often allege negligence, although informed consent or product liability may also be causes of legal claims for damages. For daily wear patients, the most likely causes of claims are nonapproved use of lenses or solutions, monovision contact lenses, negligence by a contact lens technician, failure to verify lenses before dispensing, mismanagement of contact lens-related corneal abrasions, and inadequate monitoring of ocular health. For extended-wear patients, the most common sources of liability claims are inappropriate patient selection, inadequate training of patients, improper wearing schedules, improper management of contact lens-related corneal complications, and inadequate monitoring of ocular health.

  20. 23-gauge vitrectomy for retained lens material.

    PubMed

    Bhandari, Ramanath; Ernst, Benjamin J; Stafeeva, Ksenia; Mandava, Naresh; Quiroz-Mercado, Hugo

    2012-07-01

    A technique for removal of retained lens material is described with a three-port 23-gauge vitrectomy system. Removal of the core vitreous is first performed, followed by removal of the cortical vitreous. All vitreous adhesions to the lens are cleared. The cut rate is then decreased to 1,500 cuts per minute, and vacuum increased to 600 mm Hg. The cortical lens material is cleared first, and then the nuclear material is taken with the same vitrectomy probe using the light pipe to assist in crushing the nuclear fragments. With this technique, even large dense nuclear and cortical retained lens material can be removed from the vitreous chamber without the need for a fragmatome. PMID:22692723

  1. Role of Aquaporin 0 in lens biomechanics

    SciTech Connect

    Sindhu Kumari, S.; Gupta, Neha; Shiels, Alan; FitzGerald, Paul G.; Menon, Anil G.; Mathias, Richard T.; Varadaraj, Kulandaiappan

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5{sup −/−}), AQP0 KO (heterozygous KO: AQP0{sup +/−}; homozygous KO: AQP0{sup −/−}; all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0{sup +/−} lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and

  2. Luneburg lens and optical matrix algebra research

    NASA Technical Reports Server (NTRS)

    Wood, V. E.; Busch, J. R.; Verber, C. M.; Caulfield, H. J.

    1984-01-01

    Planar, as opposed to channelized, integrated optical circuits (IOCs) were stressed as the basis for computational devices. Both fully-parallel and systolic architectures are considered and the tradeoffs between the two device types are discussed. The Kalman filter approach is a most important computational method for many NASA problems. This approach to deriving a best-fit estimate for the state vector describing a large system leads to matrix sizes which are beyond the predicted capacities of planar IOCs. This problem is overcome by matrix partitioning, and several architectures for accomplishing this are described. The Luneburg lens work has involved development of lens design techniques, design of mask arrangements for producing lenses of desired shape, investigation of optical and chemical properties of arsenic trisulfide films, deposition of lenses both by thermal evaporation and by RF sputtering, optical testing of these lenses, modification of lens properties through ultraviolet irradiation, and comparison of measured lens properties with those expected from ray trace analyses.

  3. Gravitational Lens B0218+357

    NASA Video Gallery

    This movie illustrates the components of a gravitational lens system (a kind of natural telescope formed when a rare cosmic alignment allows the gravity of a massive object to bend and amplify ligh...

  4. Introduction to the development of intraocular lens

    NASA Astrophysics Data System (ADS)

    Li, Yifan; Peng, Runling; Hu, Shuilan; Wei, Maowei; Chen, Jiabi

    2013-08-01

    In order to cure the cataract disease or injuries in eyes, intraocular lens(IOL) has been studied all the time to replace the crystalline lens in human eyes. Researches on IOL are started early from 19th century, and it develops greatly in the hundreds years after. This article introduces several main kinds of IOLs that appear in the development history of IOL, and raises the double-liquid zoom IOL based on electrowetting, which will be the trend of IOL study.

  5. Environmental standards for intraocular lens implantation.

    PubMed

    Crawford, B A; Kaufman, D V

    1984-02-01

    Successful implantation of prosthetic devices depends upon their freedom from postoperative inflammation and infection. Techniques and lessons learned in orthopaedic and other implant surgery should be applied to intraocular lens implantation. The avoidance of contamination by particles and micro-organisms is one essential principle of the surgical procedure. Practical steps are described to reduce both types of contamination. These measures taken together are recommended for adoption as a standard of environmental safety for lens implantation.

  6. Lens Design Using Group Indices of Refraction

    NASA Technical Reports Server (NTRS)

    Vaughan, A. H.

    1995-01-01

    An approach to lens design is described in which the ratio of the group velocity to the speed of light (the group index) in glass is used, in conjunction with the more familiar phase index of refraction, to control certain chromatic properties of a system of thin lenses in contact. The first-order design of thin-lens systems is illustrated by examples incorporating the methods described.

  7. Amiodarone keratopathy and rigid contact lens wear.

    PubMed

    Astin, C L

    2001-01-01

    Two cases are presented of patients wearing rigid gas permeable contact lenses who exhibited the typical fan-shaped patterns of corneal pigment deposition related to long-term medication containing amiodarone. The vortex corneal epitheliopathy and contact lens tolerance were monitored over several years. In both cases, the lens material was replaced with one incorporating an ultra-violet light inhibitor in view of the possibility of medically induced photosensitivity.

  8. Veselago lens by photonic hyper-crystals

    SciTech Connect

    Huang, Zun Narimanov, Evgenii E.

    2014-07-21

    Based on the recent concept of the photonic hyper-crystal—an artificial optical medium that combines the properties of hyperbolic materials and photonic crystals, we present the imaging system functioning as a Veselago lens. This planar lens shows a nearly constant negative refractive index with substantially reduced image aberrations, and can find potential applications in photolithography and hot-spots detection of silicon-based integrated circuits.

  9. ["Christmas tree decoration" crystals in the lens].

    PubMed

    Pau, H

    1983-01-01

    In lens crystal cataracts resembling Christmas tree decorations there are, most commonly in the nucleus, crystals in tubular cavities whose double refraction corresponds to that of cholesterol. There are considerable differences in the sizes of the crystals and they are not restricted to the borders of the lens fibers. In the cortex the cholesterol crystals minute if they are found here at all are situated in areas disposed to water-cleft formation.

  10. A Note on Divergences.

    PubMed

    Liang, Xiao

    2016-10-01

    In many areas of neural computation, like learning, optimization, estimation, and inference, suitable divergences play a key role. In this note, we study the conjecture presented by Amari ( 2009 ) and find a counterexample to show that the conjecture does not hold generally. Moreover, we investigate two classes of [Formula: see text]-divergence (Zhang, 2004 ), weighted f-divergence and weighted [Formula: see text]-divergence, and prove that if a divergence is a weighted f-divergence, as well as a Bregman divergence, then it is a weighted [Formula: see text]-divergence. This result reduces in form to the main theorem established by Amari ( 2009 ) when [Formula: see text] [Formula: see text].

  11. Photon nanojet lens: design, fabrication and characterization

    NASA Astrophysics Data System (ADS)

    Xu, Chen; Zhang, Sichao; Shao, Jinhai; Lu, Bing-Rui; Mehfuz, Reyad; Drakeley, Stacey; Huang, Fumin; Chen, Yifang

    2016-04-01

    In this paper, a novel nanolens with super resolution, based on the photon nanojet effect through dielectric nanostructures in visible wavelengths, is proposed. The nanolens is made from plastic SU-8, consisting of parallel semi-cylinders in an array. This paper focuses on the lens designed by numerical simulation with the finite-difference time domain method and nanofabrication of the lens by grayscale electron beam lithography combined with a casting/bonding/lift-off transfer process. Monte Carlo simulation for injected charge distribution and development modeling was applied to define the resultant 3D profile in PMMA as the template for the lens shape. After the casting/bonding/lift-off process, the fabricated nanolens in SU-8 has the desired lens shape, very close to that of PMMA, indicating that the pattern transfer process developed in this work can be reliably applied not only for the fabrication of the lens but also for other 3D nanopatterns in general. The light distribution through the lens near its surface was initially characterized by a scanning near-field optical microscope, showing a well defined focusing image of designed grating lines. Such focusing function supports the great prospects of developing a novel nanolithography based on the photon nanojet effect.

  12. The lens as a nonuniform spherical syncytium.

    PubMed Central

    Mathias, R T; Rae, J L; Eisenberg, R S

    1981-01-01

    The effective intracellular resistivity Ri of the ocular lens is a measure of the coupling between cells. Since degradation of coupling may accompany cataracts, measurements of Ri are of considerable interest. Experimental results show that the lens is a nonuniform syncytium in which Ri is much higher in the nuclear region than in the cortex. A theory describing the lens as a radially nonuniform spherical syncytium is proposed, solved, and described as a simple equivalent circuit. The impedance of the lens is measured with new circuitry which permits the accurate application and measurement of current and voltage over a wide bandwidth without arbitrary compensation of unstable capacitances. The fit of the nonuniform theory to experimental data is satisfactory and the parameters determined are consistent with theoretical assumptions. In the outer region (cortex) of the lens Ri = 2.4 k omega-cm, probably as a consequence of differences in coupling and cytoplasmic resistivity. The radial resistivity of the cortex is some five times the circumferential resistivity, demonstrating a marked anisotropy in the preparation, probably reflecting the anisotropy in the orientation of lens fibers and distribution of gap junctions. Current can flow in the circumferential direction without crossing from fiber to fiber; current can flow in the radial direction only by crossing from fiber to fiber. PMID:7213932

  13. LENS: Science Scope and Development Stages

    NASA Astrophysics Data System (ADS)

    Vogelaar, R. Bruce

    2013-04-01

    The Low-Energy Neutrino Spectroscopy (LENS) experiment will resolve the solar metallicity question via measurement of the CNO neutrino flux, as well as test the predicted equivalence of solar luminosity as measured by photon versus neutrinos. The LENS detector uses charged-current interaction of neutrinos on Indium-115 (loaded in a scintillator, InLS) to reveal the complete solar neutrino spectrum. LENS's optically segmented 3D lattice geometry achieves precise time and spatial resolution and unprecedented background rejection and sensitivity for low-energy neutrino events. This first-of-a-kind lattice design is also suited for a range of other applications where high segmentation and large light collection are required (eg: sterile neutrinos with sources, double beta decay, and surface detection of reactor neutrinos). The physics scope, detector design, and logic driving the microLENS and miniLENS prototyping stages will be presented. The collaboration is actively running programs; building, operating, developing, and simulating these prototypes using the Kimballton Underground Research Facility (KURF). New members are welcome to the LENS Collaboration, and interested parties should contact R. Bruce Vogelaar.

  14. Conservation Through the Economics Lens

    NASA Astrophysics Data System (ADS)

    Farley, Joshua

    2010-01-01

    Although conservation is an inherently transdisciplinary issue, there is much to be gained from examining the problem through an economics lens. Three benefits of such an approach are laid out in this paper. First, many of the drivers of environmental degradation are economic in origin, and the better we understand them, the better we can conserve ecosystems by reducing degradation. Second, economics offers us a when-to-stop rule, which is equivalent to a when-to-conserve rule. All economic production is based on the transformation of raw materials provided by nature. As the economic system grows in physical size, it necessarily displaces and degrades ecosystems. The marginal benefits of economic growth are diminishing, and the marginal costs of ecological degradation are increasing. Conceptually, we should stop economic growth and focus on conservation when the two are equal. Third, economics can help us understand how to efficiently and justly allocate resources toward conservation, and this paper lays out some basic principles for doing so. Unfortunately, the field of economics is dominated by neoclassical economics, which builds an analytical framework based on questionable assumptions and takes an excessively disciplinary and formalistic approach. Conservation is a complex problem, and analysis from individual disciplinary lenses can make important contributions to conservation only when the resulting insights are synthesized into a coherent vision of the whole. Fortunately, there are a number of emerging transdisciplines, such as ecological economics and environmental management, that are dedicated to this task.

  15. The lens equator: a platform for molecular machinery that regulates the switch from cell proliferation to differentiation in the vertebrate lens.

    PubMed

    Mochizuki, Toshiaki; Masai, Ichiro

    2014-06-01

    The vertebrate lens is a transparent, spheroidal tissue, located in the anterior region of the eye that focuses visual images on the retina. During development, surface ectoderm associated with the neural retina invaginates to form the lens vesicle. Cells in the posterior half of the lens vesicle differentiate into primary lens fiber cells, which form the lens fiber core, while cells in the anterior half maintain a proliferative state as a monolayer lens epithelium. After formation of the primary fiber core, lens epithelial cells start to differentiate into lens fiber cells at the interface between the lens epithelium and the primary lens fiber core, which is called the equator. Differentiating lens fiber cells elongate and cover the old lens fiber core, resulting in growth of the lens during development. Thus, lens fiber differentiation is spatially regulated and the equator functions as a platform that regulates the switch from cell proliferation to cell differentiation. Since the 1970s, the mechanism underlying lens fiber cell differentiation has been intensively studied, and several regulatory factors that regulate lens fiber cell differentiation have been identified. In this review, we focus on the lens equator, where these regulatory factors crosstalk and cooperate to regulate lens fiber differentiation. Normally, lens epithelial cells must pass through the equator to start lens fiber differentiation. However, there are reports that when the lens epithelium structure is collapsed, lens fiber cell differentiation occurs without passing the equator. We also discuss a possible mechanism that represses lens fiber cell differentiation in lens epithelium.

  16. NOTES ON EXPERIMENTS: Diffraction demonstration on television

    NASA Astrophysics Data System (ADS)

    Kruglak, Haym

    1989-11-01

    The experimental arrangement of a previous note (see ibid., vol.23, p.306 (1988) and see Phys. Teach. vol.26, p.157 (1988)) can be used for displaying diffraction patterns on a TV monitor. The relevant apparatus is shown and latex microspheres, available from scientific supply houses, are projected with a microscope onto a TV monitor. One drop of the latex concentrate is diluted with 25-50 ml of H2O. The cavity of a depression slide is filled with the suspension. A cover glass is placed over the cavity, the excess liquid wiped off and the edges of the cover seated with nail polish. The lens of the TV camera is removed and replaced with a 10-15 cm metal or cardboard tube. The eyepiece of the microscope is also removed. With a 20× objective and a 50-60 cm distance between the bottom of the camera and the microscope stage, the image diameters of the microspheres on the monitor screen are 1-2 cm in diameter. The Fresnel diffraction bands around 1.1 μm latex microspheres are shown.

  17. Gravitational binary-lens events with prominent effects of lens orbital motion

    SciTech Connect

    Park, H.; Han, C.; Choi, J.-Y.; Udalski, A.; Szymański, M. K.; Kubiak, M.; Soszyński, I.; Pietrzyński, G.; Poleski, R.; Ulaczyk, K.; Pietrukowicz, P.; Kozłowski, S.; Skowron, J.; Wyrzykowski, Ł.; Gould, A.; Gaudi, B. S.; Beaulieu, J.-P.; Tsapras, Y.; Depoy, D. L.; Dong, Subo; Collaboration: OGLE Collaboration; μFUN Collaboration; PLANET Collaboration; RoboNet Collaboration; and others

    2013-12-01

    Gravitational microlensing events produced by lenses composed of binary masses are important because they provide a major channel for determining physical parameters of lenses. In this work, we analyze the light curves of two binary-lens events, OGLE-2006-BLG-277 and OGLE-2012-BLG-0031, for which the light curves exhibit strong deviations from standard models. From modeling considering various second-order effects, we find that the deviations are mostly explained by the effect of the lens orbital motion. We also find that lens parallax effects can mimic orbital effects to some extent. This implies that modeling light curves of binary-lens events not considering orbital effects can result in lens parallaxes that are substantially different from actual values and thus wrong determinations of physical lens parameters. This demonstrates the importance of routine consideration of orbital effects in interpreting light curves of binary-lens events. It is found that the lens of OGLE-2006-BLG-277 is a binary composed of a low-mass star and a brown dwarf companion.

  18. Effect of Mild Heating on Human Lens Epithelial Cells: A Possible Model of Lens Aging

    PubMed Central

    Zhang, Keke; Zhu, Xiangjia; Lu, Yi

    2016-01-01

    This study aims to investigate the effect of mild heating on lens epithelial cells and to explore its possibility as an in vitro model for lens aging. Human lens epithelial cells (LECs) were heated at 50 °C for a cellular lens aging study. Analysis of the head group order of lens membranes was performed using Laurdan labeling. Immunofluorescence was performed to detect changes in α-crystallin expression and its cellular distribution. The chaperone-like activity of α-crystallin was also assessed. After mild heating, α-crystallin in LECs showed a tendency towards accumulation around the nucleus. The membrane head group environment of lens epithelial cells became more fluid with increasing time of exposure to mild heating, as indicated by increased water penetration. Furthermore, the chaperone activity of α-crystallin decreased, and suggests a relatively lower protective effect on other functional proteins in LECs. Thus, compared to the mild heating model based on lens tissue, this cellular model could provide a more convenient and accurate method for studying lens aging in vitro, including changes in membrane head group order in each cell, the real-time observation of crystallin distribution, and the monitoring of functional changes in the chaperone activity of crystallins as a result of aging. PMID:27725687

  19. Lens-based fluorescence nanoscopy.

    PubMed

    Eggeling, Christian; Willig, Katrin I; Sahl, Steffen J; Hell, Stefan W

    2015-05-01

    The majority of studies of the living cell rely on capturing images using fluorescence microscopy. Unfortunately, for centuries, diffraction of light was limiting the spatial resolution in the optical microscope: structural and molecular details much finer than about half the wavelength of visible light (~200 nm) could not be visualized, imposing significant limitations on this otherwise so promising method. The surpassing of this resolution limit in far-field microscopy is currently one of the most momentous developments for studying the living cell, as the move from microscopy to super-resolution microscopy or 'nanoscopy' offers opportunities to study problems in biophysical and biomedical research at a new level of detail. This review describes the principles and modalities of present fluorescence nanoscopes, as well as their potential for biophysical and cellular experiments. All the existing nanoscopy variants separate neighboring features by transiently preparing their fluorescent molecules in states of different emission characteristics in order to make the features discernible. Usually these are fluorescent 'on' and 'off' states causing the adjacent molecules to emit sequentially in time. Each of the variants can in principle reach molecular spatial resolution and has its own advantages and disadvantages. Some require specific transitions and states that can be found only in certain fluorophore subfamilies, such as photoswitchable fluorophores, while other variants can be realized with standard fluorescent labels. Similar to conventional far-field microscopy, nanoscopy can be utilized for dynamical, multi-color and three-dimensional imaging of fixed and live cells, tissues or organisms. Lens-based fluorescence nanoscopy is poised for a high impact on future developments in the life sciences, with the potential to help solve long-standing quests in different areas of scientific research.

  20. Hangar no. 2 west door detail view. Note tracks. Note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Hangar no. 2 west door detail view. Note tracks. Note box structures on doors for door opening mechanisms. Looking 4 N. - Marine Corps Air Station Tustin, Southern Lighter Than Air Ship Hangar, Near intersection of Windmill Road & Johnson Street, Tustin, Orange County, CA

  1. Online Class Size, Note Reading, Note Writing and Collaborative Discourse

    ERIC Educational Resources Information Center

    Qiu, Mingzhu; Hewitt, Jim; Brett, Clare

    2012-01-01

    Researchers have long recognized class size as affecting students' performance in face-to-face contexts. However, few studies have examined the effects of class size on exact reading and writing loads in online graduate-level courses. This mixed-methods study examined relationships among class size, note reading, note writing, and collaborative…

  2. [Representation and mathematical analysis of human crystalline lens].

    PubMed

    Tălu, Stefan; Giovanzana, Stefano; Tălu, Mihai

    2011-01-01

    The surface of human crystalline lens can be described and analyzed using mathematical models based on parametric representations, used in biomechanical studies and 3D solid modeling of the lens. The mathematical models used in lens biomechanics allow the study and the behavior of crystalline lens on variables and complex dynamic loads. Also, the lens biomechanics has the potential to improve the results in the development of intraocular lenses and cataract surgery. The paper presents the most representative mathematical models currently used for the modeling of human crystalline lens, both optically and biomechanically.

  3. Scratch resistance of rigid contact lens materials.

    PubMed

    Tranoudis, I; Efron, N

    1996-07-01

    Practitioners have long recognised the importance of determining the extent of scratching on the surface of rigid contact lenses when deciding on lens replacement. Despite this, little research has been undertaken to define this problem. The extent of scratching of rigid contact lens materials was evaluated and this property was related to material oxygen permeability and refractive index. One hundred and forty lenses made from 28 different rigid materials were evaluated in a masked and randomised manner. Scratches were created on the front surface of the lenses using an apparatus that was specifically designed and constructed for this experiment. The extent of scratching was quantitatively evaluated using a computer-based scanning and image analysis system. The oxygen permeability of all materials was measured using the polarographic method. An Atago N3000 hand-held refractometer was used to measure the refractive index of these materials. Three significant correlations were revealed: an inverse relationship (r = -0.813, P < 0.0001) between oxygen permeability and refractive index; a positive relationship (r = 0.511, P < 0.008) between oxygen permeability and the extent of scratching; and an inverse relationship (r = -0.539, P < 0.0058) between refractive index and the extent of scratching. The information generated in this study concerning scratch resistance of rigid contact-lens materials may assist the contact lens industry and contact lens practitioners in developing and prescribing rigid lenses with optimal performance characteristics.

  4. Design and fabrication of soft zoom lens

    NASA Astrophysics Data System (ADS)

    Lin, Wei-Cheng; Chen, Chao-Chang A.; Huang, Kuo-Cheng

    2008-08-01

    With minimization of optical-electronics devices, conventional optical zoom lens component has been explored with liquid lens and soft polymer membranes. This paper introduces a novel zoom lens system with a soft polymer material, Polydimethylsiloxane (PDMS), its shape and curvature can be controlled by pneumatic pressure. Therefore, effective focal length (EFL) of soft zoom lens (SZL) system can be controlled and altered. According to desired opto-mechanical design, this ZL has been accessed to determine the optical specifications. After the pressure activated from 0 to 0.02MPa, the change of EFL of the SZL system can reach up to 18.77% (33.44mm to 39.717mm). Experimental results show that zoom effects of the developed SZL system are significantly affected by the shape, thickness and curing parameter of PDMS soft lens. The SZL system has been verified with the function of zoom ability. Further research works on the integration of the SZL system with imaging system for mobile devices or robot vision applications.

  5. Apoptosis in the lens anlage of the heritable lens aplastic mouse (lap mouse).

    PubMed

    Aso, S; Tashiro, M; Baba, R; Sawaki, M; Noda, S; Fujita, M

    1998-08-01

    Adult homozygous lap mice show various eye abnormalities, such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode seems to develop normally. However, the lens vesicle progresses abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. We examined cell death in the lens anlage of this mutant. The lens anlagen of homozygous lap and normal mice from days 10 to 12 of gestation were observed by light microscopy after DNA end-labeling by immunohistochemistry and by transmission electron microscopy. By light microscopy, a slight frequency of cell death was detected in the lens anlage encircling the surface ectoderm and in the anlage or in the anlage of both homozygous lap mice and normal mice at day 10 of gestation. Cell death was seen in the lens anlage encircling the surface ectoderm in the normal mouse and sporadically in the anlage of the homozygous lap mouse at day 10.5 of gestation. Cell death was visible at the area of the lens vesicle attached to the surface ectoderm and encircling the surrounding surface ectoderm in the normal mouse, and in the lens anlage encircling the surface ectoderm and the apex areas of the lens anlage in the homozygous lap mouse at day 11 of gestation. At day 12 of gestation, almost no cell death was observed in the lens anlage of the normal mouse. However, extensive areas of cell death were still seen in the lens anlage at its apex, at the inner region, and encircling the surface ectoderm in the homozygous lap mouse. Electron microscopic observation showed that the dead cells observed in the lens anlagen by light microscopy in normal and lap mice are the result of apoptosis. In lap mice, cells with cytoplasmic condensation were observed mainly at days 10 and 10.5 of gestation. Many apoptotic bodies which had been phagocytosed by adjacent cells were seen predominantly at day 11 of gestation. At day 12 of

  6. Note: Characteristic beam parameter for the line electron gun.

    PubMed

    Iqbal, M; Islam, G U; Zhou, Z; Chi, Y

    2013-11-01

    We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm(2) at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm(2)), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful. PMID:24289448

  7. Note: Characteristic beam parameter for the line electron gun

    SciTech Connect

    Iqbal, M.; Islam, G. U.; Zhou, Z.; Chi, Y.

    2013-11-15

    We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm{sup 2} at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm{sup 2}), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

  8. Note: Characteristic beam parameter for the line electron gun.

    PubMed

    Iqbal, M; Islam, G U; Zhou, Z; Chi, Y

    2013-11-01

    We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm(2) at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm(2)), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

  9. Note: Characteristic beam parameter for the line electron gun

    NASA Astrophysics Data System (ADS)

    Iqbal, M.; Islam, G. U.; Zhou, Z.; Chi, Y.

    2013-11-01

    We have optimized the beam parameters of line source electron gun using Stanford Linear Accelerator Centre electron beam trajectory program (EGUN), utilizing electrostatic focusing only. We measured minimum beam diameter as 0.5 mm that corresponds to power density of 68.9 kW/cm2 at 13.5 mm in the post-anode region which is more than two-fold (33 kW/cm2), of the previously reported results. The gun was operated for the validation of the theoretical results and found in good agreement. The gun is now without any magnetic and electrostatic focusing thus much simpler and more powerful.

  10. Bio-inspired accommodating fluidic intraocular lens.

    PubMed

    Qiao, Wen; Johnson, Daniel; Tsai, Frank S; Cho, Sung Hwan; Lo, Yu-Hwa

    2009-10-15

    The invention of intraocular lens (IOL), a substitute for crystalline lens, represents a major advancement in cataract surgery. After about sixty years of IOL development, one key remaining problem is its limited accommodation range compared with natural eyes. To overcome this performance limit, we explore bio-inspired fluidic IOL. By mimicking the working principle of natural eyes, a fluidic intraocular lens can achieve an exceedingly large accommodation range. An experiment on fluidic IOL demonstrated a very high tuning range of 12 D. This accommodation range was achieved with a modest amount of force (0.06 N) and equatorial radius change (0.286 mm), in conditions matching well with the characteristics of aged eyes. PMID:19838277

  11. Terahertz lens made out of natural stone.

    PubMed

    Han, Daehoon; Lee, Kanghee; Lim, Jongseok; Hong, Sei Sun; Kim, Young Kie; Ahn, Jaewook

    2013-12-20

    Terahertz (THz) time-domain spectroscopy probes the optical properties of naturally occurring solid aggregates of minerals, or stones, in the THz frequency range. Refractive index and extinction coefficient measurement reveals that most natural stones, including mudstone, sandstone, granite, tuff, gneiss, diorite, slate, marble, and dolomite, are fairly transparent for THz frequency waves. Dolomite in particular exhibits a nearly uniform refractive index of 2.7 over the broad frequency range from 0.1 to 1 THz. The high index of refraction allows flexibility in lens designing with a shorter accessible focal length or a thinner lens with a given focal length. Good agreement between the experiment and calculation for the THz beam profile confirms that dolomite has high homogeneity as a lens material, suggesting the possibility of using natural stones for THz optical elements. PMID:24513932

  12. RHIC electron lens test bench diagnostics

    SciTech Connect

    Gassner, D.; Beebe, E.; Fischer, W.; Gu, X.; Hamdi, K.; Hock, J.; Liu, C.; Miller, T.; Pikin, A.; Thieberger, P.

    2011-05-16

    An Electron Lens (E-Lens) system will be installed in RHIC to increase luminosity by counteracting the head-on beam-beam interaction. The proton beam collisions at the RHIC experimental locations will introduce a tune spread due to a difference of tune shifts between small and large amplitude particles. A low energy electron beam will be used to improve luminosity and lifetime of the colliding beams by reducing the betatron tune shift and spread. In preparation for the Electron Lens installation next year, a test bench facility will be used to gain experience with many sub-systems. This paper will discuss the diagnostics related to measuring the electron beam parameters.

  13. Rotating black lens solution in five dimensions

    SciTech Connect

    Chen Yu; Teo, Edward

    2008-09-15

    It has recently been shown that a stationary, asymptotically flat vacuum black hole in five space-time dimensions with two commuting axial symmetries must have an event horizon with either a spherical, ring or lens-space topology. In this paper, we study the third possibility, a so-called black lens with L(n,1) horizon topology. Using the inverse scattering method, we construct a black-lens solution with the simplest possible rod structure, and possessing a single asymptotic angular momentum. Its properties are then analyzed; in particular, it is shown that there must either be a conical singularity or a naked curvature singularity present in the space-time.

  14. Invited review article: the electrostatic plasma lens.

    PubMed

    Goncharov, Alexey

    2013-02-01

    The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

  15. Terahertz lens made out of natural stone.

    PubMed

    Han, Daehoon; Lee, Kanghee; Lim, Jongseok; Hong, Sei Sun; Kim, Young Kie; Ahn, Jaewook

    2013-12-20

    Terahertz (THz) time-domain spectroscopy probes the optical properties of naturally occurring solid aggregates of minerals, or stones, in the THz frequency range. Refractive index and extinction coefficient measurement reveals that most natural stones, including mudstone, sandstone, granite, tuff, gneiss, diorite, slate, marble, and dolomite, are fairly transparent for THz frequency waves. Dolomite in particular exhibits a nearly uniform refractive index of 2.7 over the broad frequency range from 0.1 to 1 THz. The high index of refraction allows flexibility in lens designing with a shorter accessible focal length or a thinner lens with a given focal length. Good agreement between the experiment and calculation for the THz beam profile confirms that dolomite has high homogeneity as a lens material, suggesting the possibility of using natural stones for THz optical elements.

  16. Focusing light with a flame lens.

    PubMed

    Michaelis, Max M; Mafusire, Cosmas; Grobler, Jan-Hendrik; Forbes, Andrew

    2013-01-01

    The lens is a well-understood optical component used for focusing light, but is almost exclusively made in the solid-state form and, thus, suffers from optical damage at high powers. Attempts to overcome this through the use of non-solid graded-index media for lensing, for example, heated gasses, have found limited application owing to their long focal lengths. Here we describe the first flame lens, which produces a sharp focus with very little stray light and has a fourfold increase in focal power per unit length over previous gas lenses. Such gas devices remain topical due to their inherent ability to deliver high-power laser beams: our flame lens has a 'damage' threshold that is several orders of magnitude higher than that of most conventional lenses and is immediately repaired after damage for reuse, and thus will be of use in focusing high-irradiance laser beams.

  17. Focusing light with a flame lens

    NASA Astrophysics Data System (ADS)

    Michaelis, Max M.; Mafusire, Cosmas; Grobler, Jan-Hendrik; Forbes, Andrew

    2013-05-01

    The lens is a well-understood optical component used for focusing light, but is almost exclusively made in the solid-state form and, thus, suffers from optical damage at high powers. Attempts to overcome this through the use of non-solid graded-index media for lensing, for example, heated gasses, have found limited application owing to their long focal lengths. Here we describe the first flame lens, which produces a sharp focus with very little stray light and has a fourfold increase in focal power per unit length over previous gas lenses. Such gas devices remain topical due to their inherent ability to deliver high-power laser beams: our flame lens has a ‘damage’ threshold that is several orders of magnitude higher than that of most conventional lenses and is immediately repaired after damage for reuse, and thus will be of use in focusing high-irradiance laser beams.

  18. A Luneburg lens in moving coordinates

    NASA Astrophysics Data System (ADS)

    Gladyshev, V. O.; Tereshin, A. A.

    2016-05-01

    The reflection of light rays by a reference microsatellite of new design, which moves with a velocity of 7500 m/s along a near-Earth orbit with a radius of 835 km, is calculated. The microsatellite is a bilayer Luneburg lens with an outer radius of 85 mm. The process of propagation of electromagnetic radiation in a Luneburg lens is analyzed for the first time with the effects of electrodynamics of moving media and optical glass dispersion taken into account. It is demonstrated that the lens motion leads to additional deflection and mixing of rays with various angles of incidence. The obtained results allow one to improve the accuracy of determination of satellite coordinates and open up new opportunities for tests of the theory of relativity and electrodynamics.

  19. Invited Review Article: The electrostatic plasma lens

    SciTech Connect

    Goncharov, Alexey

    2013-02-15

    The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

  20. Underwater imaging with a moving acoustic lens.

    PubMed

    Kamgar-Parsi, B; Rosenblum, L J; Belcher, E O

    1998-01-01

    The acoustic lens is a high-resolution, forward-looking sonar for three dimensional (3-D) underwater imaging. We discuss processing the lens data for recreating and visualizing the scene. Acoustical imaging, compared to optical imaging, is sparse and low resolution. To achieve higher resolution, we obtain a denser sample by mounting the lens on a moving platform and passing over the scene. This introduces the problem of data fusion from multiple overlapping views for scene formation, which we discuss. We also discuss the improvements in object reconstruction by combining data from several passes over an object. We present algorithms for pass registration and show that this process can be done with enough accuracy to improve the image and provide greater detail about the object. The results of in-water experiments show the degree to which size and shape can be obtained under (nearly) ideal conditions.

  1. Research Notes and Information References

    1994-12-01

    The RNS (Research Notes System) is a set of programs and databases designed to aid the research worker in gathering, maintaining, and using notes taken from the literature. The sources for the notes can be books, journal articles, reports, private conversations, conference papers, audiovisuals, etc. The system ties the databases together in a relational structure, thus eliminating data redundancy while providing full access to all the information. The programs provide the means for access andmore » data entry in a way that reduces the key-entry burden for the user. Each note has several data fields. Included are the text of the note, the subject classification (for retrieval), and the reference identification data. These data are divided into four databases: Document data - title, author, publisher, etc., fields to identify the article within the document; Note data - text and page of the note; Sublect data - subject categories to ensure uniform spelling for searches. Additionally, there are subsidiary files used by the system, including database index and temporary work files. The system provides multiple access routes to the notes, both structurally (access method) and topically (through cross-indexing). Output may be directed to a printer or saved as a file for input to word processing software.« less

  2. Research Notes and Information References

    SciTech Connect

    Hartley, III, Dean S.

    1994-12-01

    The RNS (Research Notes System) is a set of programs and databases designed to aid the research worker in gathering, maintaining, and using notes taken from the literature. The sources for the notes can be books, journal articles, reports, private conversations, conference papers, audiovisuals, etc. The system ties the databases together in a relational structure, thus eliminating data redundancy while providing full access to all the information. The programs provide the means for access and data entry in a way that reduces the key-entry burden for the user. Each note has several data fields. Included are the text of the note, the subject classification (for retrieval), and the reference identification data. These data are divided into four databases: Document data - title, author, publisher, etc., fields to identify the article within the document; Note data - text and page of the note; Sublect data - subject categories to ensure uniform spelling for searches. Additionally, there are subsidiary files used by the system, including database index and temporary work files. The system provides multiple access routes to the notes, both structurally (access method) and topically (through cross-indexing). Output may be directed to a printer or saved as a file for input to word processing software.

  3. The effect of time, patching, and lens flexibility on RGP lens adherence.

    PubMed

    Lin, S T; Leahy, C D; Mandell, R B

    1989-03-01

    The effects of time, eye patching, and lens flexibility on rigid lens adherence was evaluated in five overnight, in-laboratory test sessions. Patching was investigated with a group of 11 subjects in two overnight test sessions. Sleep time and lens flexibility were investigated in three separate overnight test sessions with two groups of subjects wearing two lens types of fluorosilicone materials (Dk 92 and 60). Adherence occurred in a significant portion of eyes within a 2-hour time period, and the incidence increased throughout the night. There was no significant difference between the incidence of adherence for lenses of a flexible material compared to lenses of a more rigid material (p greater than 0.6, X2 test), nor did patching have a significant influence on the incidence of adherence. The mechanism of lens adherence may be related to several factors including arbitrary lens movement to a peripheral corneal position, the creation of a geometric spacing between the lens and the eye, lid forces producing a negative pressure, and an increase in tear viscosity throughout the night.

  4. Hyper-hemispheric lens distortion model for 3D-imaging SPAD-array-based applications

    NASA Astrophysics Data System (ADS)

    Pernechele, Claudio; Villa, Federica A.

    2015-09-01

    Panoramic omnidirectional lenses have the typical draw-back effect to obscure the frontal view, producing the classic "donut-shape" image in the focal plane. We realized a panoramic lens in which the frontal field is make available to be imaged in the focal plane together with the panoramic field, producing a FoV of 360° in azimuth and 270° in elevation; it have then the capabilities of a fish eye plus those of a panoramic lens: we call it hyper-hemispheric lens. We built and test an all-spherical hyper-hemispheric lens. The all-spherical configuration suffer for the typical issues of all ultra wide angle lenses: there is a large distortion at high view angles. The fundamental origin of the optical problems resides on the fact that chief rays angles on the object side are not preserved passing through the optics preceding the aperture stop (fore-optics). This effect produce an image distortion on the focal plane, with the focal length changing along the elevation angles. Moreover, the entrance pupil is shifting at large angle, where the paraxial approximation is not more valid, and tracing the rays appropriately require some effort to the optical designer. It has to be noted here as the distortion is not a source-point-aberrations: it is present also in well corrected optical lenses. Image distortion may be partially corrected using aspheric surface. We describe here how we correct it for our original hyper-hemispheric lens by designing an aspheric surface within the optical train and optimized for a Single Photon Avalanche Diode (SPAD) array-based imaging applications.

  5. ANALYTICAL SOLUTIONS OF SINGULAR ISOTHERMAL QUADRUPOLE LENS

    SciTech Connect

    Chu Zhe; Lin, W. P.; Yang Xiaofeng E-mail: linwp@shao.ac.cn

    2013-06-20

    Using an analytical method, we study the singular isothermal quadrupole (SIQ) lens system, which is the simplest lens model that can produce four images. In this case, the radial mass distribution is in accord with the profile of the singular isothermal sphere lens, and the tangential distribution is given by adding a quadrupole on the monopole component. The basic properties of the SIQ lens have been studied in this Letter, including the deflection potential, deflection angle, magnification, critical curve, caustic, pseudo-caustic, and transition locus. Analytical solutions of the image positions and magnifications for the source on axes are derived. We find that naked cusps will appear when the relative intensity k of quadrupole to monopole is larger than 0.6. According to the magnification invariant theory of the SIQ lens, the sum of the signed magnifications of the four images should be equal to unity, as found by Dalal. However, if a source lies in the naked cusp, the summed magnification of the left three images is smaller than the invariant 1. With this simple lens system, we study the situations where a point source infinitely approaches a cusp or a fold. The sum of the magnifications of the cusp image triplet is usually not equal to 0, and it is usually positive for major cusps while negative for minor cusps. Similarly, the sum of magnifications of the fold image pair is usually not equal to 0 either. Nevertheless, the cusp and fold relations are still equal to 0 in that the sum values are divided by infinite absolute magnifications by definition.

  6. Analytic Models of Plausible Gravitational Lens Potentials

    SciTech Connect

    Baltz, Edward A.; Marshall, Phil; Oguri, Masamune

    2007-05-04

    Gravitational lenses on galaxy scales are plausibly modeled as having ellipsoidal symmetry and a universal dark matter density profile, with a Sersic profile to describe the distribution of baryonic matter. Predicting all lensing effects requires knowledge of the total lens potential: in this work we give analytic forms for that of the above hybrid model. Emphasizing that complex lens potentials can be constructed from simpler components in linear combination, we provide a recipe for attaining elliptical symmetry in either projected mass or lens potential.We also provide analytic formulae for the lens potentials of Sersic profiles for integer and half-integer index. We then present formulae describing the gravitational lensing effects due to smoothly-truncated universal density profiles in cold dark matter model. For our isolated haloes the density profile falls off as radius to the minus fifth or seventh power beyond the tidal radius, functional forms that allow all orders of lens potential derivatives to be calculated analytically, while ensuring a non-divergent total mass. We show how the observables predicted by this profile differ from that of the original infinite-mass NFW profile. Expressions for the gravitational flexion are highlighted. We show how decreasing the tidal radius allows stripped haloes to be modeled, providing a framework for a fuller investigation of dark matter substructure in galaxies and clusters. Finally we remark on the need for finite mass halo profiles when doing cosmological ray-tracing simulations, and the need for readily-calculable higher order derivatives of the lens potential when studying catastrophes in strong lenses.

  7. Eye lens dose in interventional cardiology.

    PubMed

    Principi, S; Delgado Soler, C; Ginjaume, M; Beltran Vilagrasa, M; Rovira Escutia, J J; Duch, M A

    2015-07-01

    The ICRP has recently recommended reducing the occupational exposure dose limit for the lens of the eye to 20 mSv y(-1), averaged over a period of 5 y, with no year exceeding 50 mSv, instead of the current 150 mSv y(-1). This reduction will have important implications for interventional cardiology and radiology (IC/IR) personnel. In this work, lens dose received by a staff working in IC is studied in order to determine whether eye lens dose monitoring or/and additional radiological protection measures are required. Eye lens dose exposure was monitored in 10 physicians and 6 nurses. The major IC procedures performed were coronary angiography and percutaneous transluminal coronary angioplasty. The personnel were provided with two thermoluminescent dosemeters (TLDs): one calibrated in terms of Hp(3) located close to the left ear of the operator and a whole-body dosemeter calibrated in terms of Hp(10) and Hp(0.07) positioned on the lead apron. The estimated annual eye lens dose for physicians ranged between 8 and 60 mSv, for a workload of 200 procedures y(-1). Lower doses were collected for nurses, with estimated annual Hp(3) between 2 and 4 mSv y(-1). It was observed that for nurses the Hp(0.07) measurement on the lead apron is a good estimate of eye lens dose. This is not the case for physicians, where the influence of both the position and use of protective devices such as the ceiling shield is very important and produces large differences among doses both at the eyes and on the thorax. For physicians, a good correlation between Hp(3) and dose area product is shown. PMID:25809107

  8. Binding of actin to lens alpha crystallins

    NASA Technical Reports Server (NTRS)

    Gopalakrishnan, S.; Takemoto, L.; Spooner, B. S. (Principal Investigator)

    1992-01-01

    Actin has been coupled to a cyanogen bromide-activated Sepharose 4B column, then tested for binding to alpha, beta, and gamma crystallin preparations from the bovine lens. Alpha, but not beta or gamma, crystallins bound to the actin affinity column in a time dependent and saturable manner. Subfractionation of the alpha crystallin preparation into the alpha-A and alpha-B species, followed by incubation with the affinity column, demonstrated that both species bound approximately the same. Together, these studies demonstrate a specific and saturable binding of lens alpha-A and alpha-B with actin.

  9. Refractive index of rigid contact lens materials.

    PubMed

    Tranoudis, I; Efron, N

    1998-01-01

    A simple hand-held refractometer was used to measure the refractive index of 27 rigid gas permeable contact lens materials. As a general rule, lenses with refractive indices lower than 1.458 are made from fluorosilicone acrylates; lenses with refractive indices in the range of 1.458 to 1.469 are made from either fluorosilicone acrylates or silicone acrylates; and lenses with refractive indices greater than 1.469 are made from silicone acrylates. It is demonstrated how refractometry can be used by contact lens practitioners for the identification and verification of rigid contact lenses.

  10. Coherent diffraction imaging by moving a lens.

    PubMed

    Shen, Cheng; Tan, Jiubin; Wei, Ce; Liu, Zhengjun

    2016-07-25

    A moveable lens is used for determining amplitude and phase on the object plane. The extended fractional Fourier transform is introduced to address the single lens imaging. We put forward a fast algorithm for the transform by convolution. Combined with parallel iterative phase retrieval algorithm, it is applied to reconstruct the complex amplitude of the object. Compared with inline holography, the implementation of our method is simple and easy. Without the oversampling operation, the computational load is less. Also the proposed method has a superiority of accuracy over the direct focusing measurement for the imaging of small size objects. PMID:27464107

  11. Novel approach to a perfect lens

    NASA Astrophysics Data System (ADS)

    Klimov, V. V.

    2009-05-01

    Within the framework of an exact analytical solution of Maxwell equations in a space domain, it is shown that optical scheme based on a slab with negative refractive index ( n = -1) (Veselago lens or Pendry lens) does not possess focusing properties in the usual sense. In fact, the energy in such systems does not go from object to its “image,” but from object and its “image” to an intersection point inside a metamaterial layer, or vice versa. A possibility of applying this phenomenon to a creation of entangled states of two atoms is discussed.

  12. Tunable dielectric liquid lens on flexible substrate

    PubMed Central

    Lu, Yen-Sheng; Tu, Hongen; Xu, Yong; Jiang, Hongrui

    2013-01-01

    We demonstrate the fabrication of a tunable-focus dielectric liquid lens (DLL) on a flexible substrate made of polydimethylsiloxane, which was wrapped onto a goggle surface to show its functionality. As a positive meniscus converging lens, the DLL has the focal length variable from 14.2 to 6.3 mm in 1.3 s when the driving voltage increases to 125 Vrms. The resolving power of the DLL is 17.95 line pairs per mm. The DLL on a flexible, curvilinear surface is promising for expanded field of view covered as well as in reconfigurable optical systems. PMID:24493877

  13. Time resolved thermal lens in edible oils

    NASA Astrophysics Data System (ADS)

    Albuquerque, T. A. S.; Pedreira, P. R. B.; Medina, A. N.; Pereira, J. R. D.; Bento, A. C.; Baesso, M. L.

    2003-01-01

    In this work time resolved thermal lens spectrometry is applied to investigate the optical properties of the following edible oils: soya, sunflower, canola, and corn oils. The experiments were performed at room temperature using the mode mismatched thermal lens configuration. The results showed that when the time resolved procedure is adopted the technique can be applied to investigate the photosensitivity of edible oils. Soya oil presented a stronger photochemical reaction as compared to the other investigated samples. This observation may be relevant for future studies evaluating edible oils storage conditions and also may contribute to a better understanding of the physical and chemical properties of this important foodstuff.

  14. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    PubMed Central

    Bonafonte Marquez, Elena; Bonafonte Royo, Sergio

    2015-01-01

    We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL) implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for it could be the only sign of secondary glaucoma. PMID:25713742

  15. Broadband diffractive lens or imaging element

    DOEpatents

    Ceglio, Natale M.; Hawryluk, Andrew M.; London, Richard A.; Seppala, Lynn G.

    1991-01-01

    A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed.

  16. Broadband diffractive lens or imaging element

    DOEpatents

    Ceglio, Natale M.; Hawryluk, Andrew M.; London, Richard A.; Seppala, Lynn G.

    1993-01-01

    A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed. Thin film embodiments are described.

  17. Aspherical lens shapes for focusing synchrotron beams.

    PubMed

    Sanchez del Rio, Manuel; Alianelli, Lucia

    2012-05-01

    Aspherical surfaces required for focusing collimated and divergent synchrotron beams using a single refractive element (lens) are reviewed. The Cartesian oval, a lens shape that produces perfect point-to-point focusing for monochromatic radiation, is studied in the context of X-ray beamlines. Optical surfaces that approximate ideal shapes are compared. Results are supported by ray-tracing simulations. Elliptical lenses, rather than parabolic, are preferred for nanofocusing X-rays because of the higher peak and lower tails in the intensity distribution. Cartesian ovals will improve the gain when using high-demagnification lenses of high numerical aperture. PMID:22514171

  18. Broadband diffractive lens or imaging element

    DOEpatents

    Ceglio, N.M.; Hawryluk, A.M.; London, R.A.; Seppala, L.G.

    1993-10-26

    A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed. Thin film embodiments are described. 21 figures.

  19. Thermal lens spectrometry in biochemical analysis.

    PubMed

    Martín-Biosca, Y; García-Alvarez-Coque, M C; Ramis-Ramos, G

    1994-07-01

    The photothermal spectroscopic techniques, with special emphasis on the thermal lens spectrometry (TLS), are introduced to the non-specialist in laser spectroscopy. The following topics are treated on an elementary basis: fundamentals and analytical characteristics, instrumentation, selectivity and multi-wavelength capability, the models describing the signal-concentration relationship, the sensitivity, background noise and limits of detection, the influence of light scattering and flow. Applications related to the fields of clinical and biochemical analysis and organic pollution are given. The thermal lens circular dichroism and the infrared TLS are also briefly outlined.

  20. Light: Isometric Casing with Lens, South Elevation, North Elevation, Top ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Light: Isometric Casing with Lens, South Elevation, North Elevation, Top Plan, Base Plan; Fresnel Lens: Isometric, Elevation, Plan - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  1. Experimental Contact Lens to Prevent Glaucoma-Induced Blindness

    MedlinePlus

    ... Articles | Inside Life Science Home Page An Experimental Contact Lens to Prevent Glaucoma-Induced Blindness By Sharon Reynolds Posted January 23, 2014 An experimental contact lens design releases a glaucoma medicine at a ...

  2. An Essential Role for FGF Receptor Signaling in Lens Development

    PubMed Central

    Robinson, Michael L.

    2007-01-01

    Since the days of Hans Spemann, the ocular lens has served as one of the most important developmental systems for elucidating fundamental processes of induction and differentiation. More recently, studies in the lens have contributed significantly to our understanding of cell cycle regulation and apoptosis. Over twenty years of accumulated evidence using several different vertebrate species has suggested that fibroblast growth factors (FGFs) and/or fibroblast growth factor receptors (FGFRs) play a key role in lens development. FGFR signaling has been implicated in lens induction, lens cell proliferation and survival, lens fiber differentiation and lens regeneration. Here we will review and discuss historical and recent evidence suggesting that (FGFR) signaling plays a vital and universal role in multiple aspects of lens development. PMID:17116415

  3. Lens Extrusion from Laminin Alpha 1 Mutant Zebrafish

    PubMed Central

    Semina, Elena V.; Duncan, Melinda K.

    2014-01-01

    We report analysis of the ocular lens phenotype of the recessive, larval lethal zebrafish mutant, lama1a69/a69. Previous work revealed that this mutant has a shortened body axis and eye defects including a defective hyaloid vasculature, focal corneal dysplasia, and loss of the crystalline lens. While these studies highlight the importance of laminin α1 in lens development, a detailed analysis of the lens defects seen in these mutants was not reported. In the present study, we analyze the lenticular anomalies seen in the lama1a69/a69 mutants and show that the lens defects result from the anterior extrusion of lens material from the eye secondary to structural defects in the lens capsule and developing corneal epithelium associated with basement membrane loss. Our analysis provides further insights into the role of the lens capsule and corneal basement membrane in the structural integrity of the developing eye. PMID:24526906

  4. A broadband zone plate lens from transformation optics.

    PubMed

    Yang, Rui; Tang, Wenxuan; Hao, Yang

    2011-06-20

    A zone plate lens utilizing a refractive instead of diffractive approach is presented for broadband operation. By utilizing transformation optics, we compress the conventional hyperbolic lens into a flat one with a few zone plates made of all-dielectric materials. Such a transformed lens maintains the broadband performance of the original lens, thus providing a superior alternative to the diffractive Fresnel element which is inherently narrow band.

  5. Modified matching Ronchi test to visualize lens aberrations

    NASA Astrophysics Data System (ADS)

    Hassani, Kh; Hooshmand Ziafi, H.

    2011-09-01

    We introduce a modification to the matching Ronchi test to visualize lens aberrations with simple and inexpensive equipment available in educational optics labs. This method can help instructors and students to observe and estimate lens aberrations in real time. It is also a semi-quantitative tool for primary tests in research labs. In this work by comparing a single lens with a doublet, we can clearly demonstrate the superior quality of the doublet over the single lens, and estimate their conic constants.

  6. 21 CFR 886.5925 - Soft (hydrophilic) contact lens.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Soft (hydrophilic) contact lens. 886.5925 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5925 Soft (hydrophilic) contact lens. (a) Identification. A soft (hydrophilic) contact lens is a device intended to be worn...

  7. 21 CFR 886.5925 - Soft (hydrophilic) contact lens.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Soft (hydrophilic) contact lens. 886.5925 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5925 Soft (hydrophilic) contact lens. (a) Identification. A soft (hydrophilic) contact lens is a device intended to be worn...

  8. 21 CFR 886.5925 - Soft (hydrophilic) contact lens.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Soft (hydrophilic) contact lens. 886.5925 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5925 Soft (hydrophilic) contact lens. (a) Identification. A soft (hydrophilic) contact lens is a device intended to be worn...

  9. 21 CFR 886.1425 - Lens measuring instrument.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Lens measuring instrument. 886.1425 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1425 Lens measuring instrument. (a) Identification. A lens measuring instrument is an AC-powered device intended to measure the power of...

  10. 21 CFR 886.1425 - Lens measuring instrument.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Lens measuring instrument. 886.1425 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1425 Lens measuring instrument. (a) Identification. A lens measuring instrument is an AC-powered device intended to measure the power of...

  11. 19. Detail of base of revolving lens assembly, showing bottom ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Detail of base of revolving lens assembly, showing bottom of lamp at center and brass tens framework at edges of circular platform. Mercury float bearing lies in circular well just beneath lens platform. (Blurred due to lens motion.) - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  12. 21 CFR 886.4300 - Intraocular lens guide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens guide. 886.4300 Section 886.4300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4300 Intraocular lens guide. (a) Identification. An intraocular lens guide is a device...

  13. 21 CFR 886.1410 - Ophthalmic trial lens clip.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ophthalmic trial lens clip. 886.1410 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1410 Ophthalmic trial lens clip. (a) Identification. An ophthalmic trial lens clip is a device intended to hold prisms, spheres, cylinders,...

  14. 21 CFR 886.1410 - Ophthalmic trial lens clip.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic trial lens clip. 886.1410 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1410 Ophthalmic trial lens clip. (a) Identification. An ophthalmic trial lens clip is a device intended to hold prisms, spheres, cylinders,...

  15. 21 CFR 886.5916 - Rigid gas permeable contact lens.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Rigid gas permeable contact lens. 886.5916 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5916 Rigid gas permeable contact lens. (a) Identification. A rigid gas permeable contact lens is a device intended to be worn...

  16. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Expiration of contact lens prescriptions. 315.6 Section 315.6 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  17. 21 CFR 800.10 - Contact lens solutions; sterility.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Contact lens solutions; sterility. 800.10 Section...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... ophthalmic use, including contact lens solutions, should be sterile. It is further evident that...

  18. 21 CFR 886.5925 - Soft (hydrophilic) contact lens.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Soft (hydrophilic) contact lens. 886.5925 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5925 Soft (hydrophilic) contact lens. (a) Identification. A soft (hydrophilic) contact lens is a device intended to be worn...

  19. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  20. 21 CFR 800.10 - Contact lens solutions; sterility.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Contact lens solutions; sterility. 800.10 Section...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... ophthalmic use, including contact lens solutions, should be sterile. It is further evident that...

  1. 21 CFR 886.5925 - Soft (hydrophilic) contact lens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Soft (hydrophilic) contact lens. 886.5925 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5925 Soft (hydrophilic) contact lens. (a) Identification. A soft (hydrophilic) contact lens is a device intended to be worn...

  2. 21 CFR 886.5420 - Contact lens inserter/remover.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Contact lens inserter/remover. 886.5420 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5420 Contact lens inserter/remover. (a) Identification. A contact lens inserter/remover is a handheld device intended to insert or...

  3. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Expiration of contact lens prescriptions. 315.6 Section 315.6 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  4. 21 CFR 886.5916 - Rigid gas permeable contact lens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rigid gas permeable contact lens. 886.5916 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5916 Rigid gas permeable contact lens. (a) Identification. A rigid gas permeable contact lens is a device intended to be worn...

  5. 21 CFR 886.1405 - Ophthalmic trial lens set.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic trial lens set. 886.1405 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1405 Ophthalmic trial lens set. (a) Identification. An ophthalmic trial lens set is a device that is a set of lenses of various dioptric...

  6. Automatic Element Addition and Deletion in Lens Optimization

    NASA Astrophysics Data System (ADS)

    Cheng, Xuemin; Wang, Yongtian; Hao, Qun; Sasian, Jose

    2003-03-01

    A mechanism is established for the automatic addition and deletion of optical elements during the course of lens optimization. Two lens-form parameters, quantifying the symmetry of the optical system and the optical-power distribution among the individual lens elements, are used as criteria in this automatic procedure. Design examples are provided that demonstrate the practicability of the scheme.

  7. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  8. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  9. 16 CFR 315.6 - Expiration of contact lens prescriptions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Commission, its employees, and its representatives. (3) No prescriber shall include an expiration date on a... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Expiration of contact lens prescriptions... CONGRESS CONTACT LENS RULE § 315.6 Expiration of contact lens prescriptions. (a) In general. A contact...

  10. Liquid-filled tunable lenticular lens

    NASA Astrophysics Data System (ADS)

    Iimura, Yoshinobu; Onoe, Hiroaki; Teshima, Tetsuhiko; Heo, Yun Jung; Yoshida, Shotaro; Morimoto, Yuya; Takeuchi, Shoji

    2015-03-01

    This paper describes a liquid-filled tunable lenticular lens for switching between two-dimensional (2D) and three-dimensional (3D) images in naked-eye 3D displays. Compared with previous 2D/3D switchable displays, this tunable lenticular lens that is directly attached to a smartphone display can project both a 2D image with the original resolution of the smartphone display and a 3D image with high brightness. This lens is simply composed of transparent poly(dimethylsiloxane) (PDMS) microchannels. While the thin top membrane on the microchannels is normally flat to transmit light without deflection for displaying 2D images, applying pressure to the microchannel deforms the membrane to acquire characteristics of lenticular lenses for 3D images. We successfully demonstrate the switching between the 2D and 3D modes. We believe that our lens can be applied as a part of a portable 2D/3D naked-eye 3D display.

  11. Lens testing using total internal reflection holography

    DOEpatents

    Hildebrand, Bernard P.

    1976-12-14

    Accurate, rapid and inexpensive testing and inspecting of lens surfaces tugh holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and convex surfaces to be so tested.

  12. Testing and inspecting lens by holographic means

    DOEpatents

    Hildebrand, Bernard P.

    1976-01-01

    Processes for the accurate, rapid and inexpensive testing and inspecting of oncave and convex lens surfaces through holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and said convex surfaces to be so tested.

  13. Low scatter lens design/development

    NASA Technical Reports Server (NTRS)

    Gallipeau, R. B.; Quesada, A.

    1974-01-01

    The criteria for the optimum design of optical systems are discussed along with the selection of appropriate materials. The construction details of low scatter lens systems are tabulated. Scattering analysis; total energy diffracted; and computation of delta for a scratch, bubble, and microscopic irregularities are also discussed.

  14. Galaxy mergers and gravitational lens statistics

    NASA Technical Reports Server (NTRS)

    Rix, Hans-Walter; Maoz, Dan; Turner, Edwin L.; Fukugita, Masataka

    1994-01-01

    We investigate the impact of hierarchical galaxy merging on the statistics of gravitational lensing of distant sources. Since no definite theoretical predictions for the merging history of luminous galaxies exist, we adopt a parameterized prescription, which allows us to adjust the expected number of pieces comprising a typical present galaxy at z approximately 0.65. The existence of global parameter relations for elliptical galaxies and constraints on the evolution of the phase space density in dissipationless mergers, allow us to limit the possible evolution of galaxy lens properties under merging. We draw two lessons from implementing this lens evolution into statistical lens calculations: (1) The total optical depth to multiple imaging (e.g., of quasars) is quite insensitive to merging. (2) Merging leads to a smaller mean separation of observed multiple images. Because merging does not reduce drastically the expected lensing frequency, it cannot make lambda-dominated cosmologies compatible with the existing lensing observations. A comparison with the data from the Hubble Space Telescope (HST) Snapshot Survey shows that models with little or no evolution of the lens population are statistically favored over strong merging scenarios. A specific merging scenario proposed to Toomre can be rejected (95% level) by such a comparison. Some versions of the scenario proposed by Broadhurst, Ellis, & Glazebrook are statistically acceptable.

  15. Design considerations for millimetre wave lens antennas

    NASA Astrophysics Data System (ADS)

    Dewey, R. J.

    1982-12-01

    Attention is given to the operational background and some of the possible single and dual lens antenna options for use in a millimetric sensor with a beamwidth of approximately 3 deg. A particular single lens antenna design is found to give a scan of more than + or - 3 beamwidths and to be compatible with conical scan, beam broadening, and monopulse operation. A dual lens antenna design is operated both with a single feed horn and with a rectangular matrix of plain waveguide radiators (with potential application in real-time imaging). Good scan characteristics are obtained out to + or - 6 beam-widths with the single feed horn, although it is found that the matrix feed assembly needs a group of elements to be fed in phase before equivalent performance can be obtained. The goal of the study presented here is to simulate feeding the lens antenna with a monolithic array, and whereas an array of waveguides cannot accurately model all the properties of a monolithic array, they are considered sufficiently representative to indicate some of the compromises that may have to be made.

  16. Tevatron electron lens and it's applications

    SciTech Connect

    Zhang, X.L.; Shiltsev, V.; Valishev, A.; Kamerdzhiev, V.; Romnov, A.; /Novosibirsk, IYF

    2009-08-01

    The Tevatron Electron Lens (TEL) is designed for the purpose of the Beam-beam tuneshift compensation. Now it's one of the vital parts of the Tevatron. In this report, its daily operations and beam study results are presented. And its possible future applications are also discussed as well.

  17. Zoom optical system using tunable polymer lens

    NASA Astrophysics Data System (ADS)

    Liang, Dan; Wang, Xuan Yin

    2016-07-01

    This paper demonstrated a zoom optical system with variable magnification based on the tunable polymer lens. The designed system mainly consists of two polymer lenses, voice coil motors, a doublet lens and CMOS chip. The zoom magnification can be adjusted by altering the focal length of the two elastic polymer lenses synergistically through controlling the output displacement of the voice coil motor. A static doublet lens in combination with the polymer lenses stabilize the image plane at the CMOS chip. The optical structure of the zoom system is presented, as well as a detailed description including the lens materials and fabrication process. Images with each zoom magnification are captured, and the Spot diagram and MTF are simulated using Zemax software. A change in magnification from 0.13×to 8.44×is demonstrated within the tiny 0.4 mm variation of the displacement load, and produce a 16.1×full range of magnification experimentally. Simulation analyses show that all the radii of the spot diagram under different magnifications are less than 11.3 um, and the modulation transfer function reaches 107 line pairs per mm. The designed optical system shows the potential for developing stable, integrated, and low-cost zoom systems with large magnification range.

  18. Gravitational Lens Modeling with Basis Sets

    NASA Astrophysics Data System (ADS)

    Birrer, Simon; Amara, Adam; Refregier, Alexandre

    2015-11-01

    We present a strong lensing modeling technique based on versatile basis sets for the lens and source planes. Our method uses high performance Monte Carlo algorithms, allows for an adaptive build up of complexity, and bridges the gap between parametric and pixel based reconstruction methods. We apply our method to a Hubble Space Telescope image of the strong lens system RX J1131-1231 and show that our method finds a reliable solution and is able to detect substructure in the lens and source planes simultaneously. Using mock data, we show that our method is sensitive to sub-clumps with masses four orders of magnitude smaller than the main lens, which corresponds to about {10}8{M}⊙ , without prior knowledge of the position and mass of the sub-clump. The modeling approach is flexible and maximizes automation to facilitate the analysis of the large number of strong lensing systems expected in upcoming wide field surveys. The resulting search for dark sub-clumps in these systems, without mass-to-light priors, offers promise for probing physics beyond the standard model in the dark matter sector.

  19. The special applications of Tevatron electron lens

    SciTech Connect

    Xiaolong Zhang et al.

    2003-08-11

    Besides the Tevatron Electron Lens (TEL) runs as a R and D project for Tevatron Beam-Beam Compensation, it is used daily as a Beam Abort Gap Cleaner for collider operations. It can also be served as beam exciter for beam dynamics measurements and slow proton or antiproton bunch remover. This report describes all these applications and observations.

  20. Luneburg lens approach to nuclear rainbow scattering.

    PubMed

    Michel, F; Reidemeister, G; Ohkubo, S

    2002-10-01

    The physical interpretation of nuclear rainbow scattering within the frame of the optical model is critically investigated. Starting from the properties of the Luneburg lens, a gradient index device that displays refractive features similar to those of the nuclear potential, important differences between the mechanisms producing the nuclear and optical rainbows are pointed out. PMID:12365983

  1. Contact Lens Wearer Demographics and Risk Behaviors for Contact Lens-Related Eye Infections--United States, 2014.

    PubMed

    Cope, Jennifer R; Collier, Sarah A; Rao, Maya M; Chalmers, Robin; Mitchell, G Lynn; Richdale, Kathryn; Wagner, Heidi; Kinoshita, Beth T; Lam, Dawn Y; Sorbara, Luigina; Zimmerman, Aaron; Yoder, Jonathan S; Beach, Michael J

    2015-08-21

    Contact lenses provide safe and effective vision correction for many Americans. However, contact lens wearers risk infection if they fail to wear, clean, disinfect, and store their contact lenses as directed. Over the past decade, CDC has investigated several multistate outbreaks of serious eye infections among contact lens wearers, including Acanthamoeba keratitis. Each investigation identified frequent contact lens hygiene-related risk behaviors among patients. To guide prevention efforts, a population-based survey was used to estimate the number of contact lens wearers aged ≥18 years in the United States. A separate online survey of contact lens wearers assessed the prevalence of contact lens hygiene-related risk behaviors. Approximately 99% of wearers reported at least one contact lens hygiene risk behavior. Nearly one third of contact lens wearers reported having experienced a previous contact lens-related red or painful eye requiring a doctor's visit. An estimated 40.9 million U.S. adults wear contact lenses, and many could be at risk for serious eye infections because of poor contact lens wear and care behaviors. These findings have informed the creation of targeted prevention messages aimed at contact lens wearers such as keeping all water away from contact lenses, discarding used disinfecting solution from the case and cleaning with fresh solution each day, and replacing their contact lens case every 3 months.

  2. Miniature lens design and optimization with liquid lens element via genetic algorithm

    NASA Astrophysics Data System (ADS)

    Fang, Yi-Chin; Tsai, Chen-Mu

    2008-07-01

    This paper proposes a design and optimization method via (GA) genetic algorithm applied to a newly developed optical element: the liquid lens as a fast focus group. This design takes advantage of quick focus which works simultaneously with modern CMOS sensors in order to significantly improve image quality. Such improvement is important, especially for medical imaging technology such as laparoscopy. However, this optical design with a liquid lens element has not achieved success yet; one of the major reasons is the lack of anomalous dispersion glass and their Abbe number, which complicates the correction of aberrations, limits its availability. From the point of view of aberration theory, most aberrations, particularly in the axial chromatic and lateral color aberration of an optical lens, play the same role as the selection of optical glass. Therefore, in the present research, some optical layouts with a liquid lens are first discussed; next, genetic algorithms are used to replace traditional LDS (least damping square) to search for the best solution using a liquid lens and find the best glass sets for the combination of anomalous dispersion glass and materials inside a liquid lens. During optimization work, the 'geometric optics' theory and 'multiple dynamic crossover and random gene mutation' technique are employed. Through implementation of the algorithms proposed in this paper, satisfactory elimination of axial and lateral color aberration can be achieved.

  3. Preventive role of lens antioxidant defense mechanism against riboflavin-mediated sunlight damaging of lens crystallins.

    PubMed

    Anbaraki, Afrooz; Khoshaman, Kazem; Ghasemi, Younes; Yousefi, Reza

    2016-10-01

    The main components of sunlight reaching the eye lens are UVA and visible light exerting their photo-damaging effects indirectly by the aid of endogenous photosensitizer molecules such as riboflavin (RF). In this study, lens proteins solutions were incubated with RF and exposed to the sunlight. Then, gel mobility shift analysis and different spectroscopic assessments were applied to examine the structural damaging effects of solar radiation on these proteins. Exposure of lens proteins to direct sunlight, in the presence of RF, leads to marked structural crosslinking, oligomerization and proteolytic instability. These structural damages were also accompanied with reduction in the emission fluorescence of Trp and Tyr and appearance of a new absorption peak between 300 and 400nm which can be related to formation of new chromophores. Also, photo-oxidation of lens crystallins increases their oligomeric size distribution as examined by dynamic light scattering analysis. The above mentioned structural insults, as potential sources of sunlight-induced senile cataract and blindness, were significantly attenuated in the presence of ascorbic acid and glutathione which are two important components of lens antioxidant defense system. Therefore, the powerful antioxidant defense mechanism of eye lens is an important barrier against molecular photo-damaging effects of solar radiations during the life span. PMID:27316765

  4. Relation between contact lens wear and Meibomian gland dysfunction.

    PubMed

    Ong, B L

    1996-03-01

    This study attempted to determine whether contact lens wear has any adverse effect on the Meibomian glands. The study also tried to elucidate the prevalence of Meibomian gland dysfunction in the general population. The results of the study showed that Meibomian gland dysfunction exists in 43% of the population (lens wearers and nonlens wearers), 49% of the contact lens wearing population (81 subjects), and 39% of nonlens wearers (150 subjects). No statistically significant difference was found in the prevalence of Meibomian gland dysfunction between healthy contact lens wearers and the control group of nonlens wearers. The study therefore could not prove that contact lens wear is a contributing factor to Meibomian gland dysfunction.

  5. Covert optically-scanning enhanced zoom pinhole lens technology

    NASA Astrophysics Data System (ADS)

    Rana, H. S.

    2007-10-01

    Lens technology has been developed that enables a scene to be scanned optically whilst the lens remains stationary. The covert optically-scanning enhanced (COSE) pinhole lens technology also has the option of incorporating a zoom capability. This allows any target in the scene to be isolated and zoomed onto for further scrutiny. The COSE lens has an external stationary entrance pupil. The operation of the lens may be visualized as optically pivoting about this pupil plane whilst scanning the scene but physically remaining stationary. A technology demonstrator has been built and its performance is discussed. Further developments of the COSE technology are also discussed.

  6. Observing posterior capsule lens haptics in living postoperative eyes.

    PubMed

    Miyake, K

    1984-08-01

    The cycloscope, an aid for observing the ciliary body, was used to study lens haptic fixation in 100 living eyes (200 haptics). Although the whole aspect of the lens could be viewed in only about 20 haptics (10%), in 102 haptics (51%), judgment about whether fixation was in or out of the bag could be made based on the relationship of the visible part of the lens haptic and the surrounding tissues. Thus, the method was found to be useful in studying the fixation mechanism of posterior chamber lens haptics in living postoperative eyes. Two cases of J-loop posterior chamber lens implantation studied by cycloscopy are reported.

  7. 12 CFR 561.33 - Note account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Note account. 561.33 Section 561.33 Banks and... SAVINGS ASSOCIATIONS § 561.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  8. 12 CFR 561.33 - Note account.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Note account. 561.33 Section 561.33 Banks and... SAVINGS ASSOCIATIONS § 561.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  9. 12 CFR 161.33 - Note account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Note account. 161.33 Section 161.33 Banks and... SAVINGS ASSOCIATIONS § 161.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  10. 12 CFR 561.33 - Note account.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Note account. 561.33 Section 561.33 Banks and... SAVINGS ASSOCIATIONS § 561.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  11. 12 CFR 390.300 - Note account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Note account. 390.300 Section 390.300 Banks and... Associations § 390.300 Note account. The term note account means a note, subject to the right of immediate call... Department regulations. Note accounts are not savings accounts or savings deposits....

  12. 12 CFR 561.33 - Note account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Note account. 561.33 Section 561.33 Banks and... SAVINGS ASSOCIATIONS § 561.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  13. 12 CFR 390.300 - Note account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Note account. 390.300 Section 390.300 Banks and... Associations § 390.300 Note account. The term note account means a note, subject to the right of immediate call... Department regulations. Note accounts are not savings accounts or savings deposits....

  14. 12 CFR 561.33 - Note account.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Note account. 561.33 Section 561.33 Banks and... SAVINGS ASSOCIATIONS § 561.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  15. 12 CFR 390.300 - Note account.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Note account. 390.300 Section 390.300 Banks and... Associations § 390.300 Note account. The term note account means a note, subject to the right of immediate call... Department regulations. Note accounts are not savings accounts or savings deposits....

  16. 12 CFR 161.33 - Note account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Note account. 161.33 Section 161.33 Banks and... SAVINGS ASSOCIATIONS § 161.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  17. 12 CFR 161.33 - Note account.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Note account. 161.33 Section 161.33 Banks and... SAVINGS ASSOCIATIONS § 161.33 Note account. The term note account means a note, subject to the right of... States Treasury Department regulations. Note accounts are not savings accounts or savings deposits....

  18. Giant Cosmic Lens Reveals Secrets of Distant Galaxy

    NASA Astrophysics Data System (ADS)

    2003-04-01

    possible to receive the radio waves from the quasar also meant that the object was too far away for the VLA to discern the detail required to show the disk. Once again, nature stepped in to help, providing another galaxy directly between the quasar and Earth to form a gravitational lens. "What we needed wasn't just any old gravitational lens, but a nearly-perfect alignment of the distant quasar, mid-distance galaxy, and Earth -- and that's what we got," said Geraint Lewis of the University of Sydney in Australia, another member of the team. With such a perfect alignment, the quasar image was distorted into a ring, called an "Einstein Ring." The VLA images were the first to show the Einstein Ring of PSS J2322+1944. "We never would have seen the disk of CO gas near the center of this galaxy without the gravitational lens," said Carilli. "The lens boosted the signal and magnified the image to reveal the disk's structure in unprecedented detail," he added. For several years, astronomers have noted that the masses of black holes are directly proportional to the sizes of central bulges of stars in galaxies. This led to the speculation that formation of the black holes and of the stars are somehow related to each other. Scientists hypothesized that gas being drawn towards a galaxy's central black hole is the same gas from which large numbers of stars are forming. Studies of more-nearby galaxies supported such speculation, but the question remained whether the idea could be applied to the very early Universe, when the first galaxies and black holes formed. "This new observation gives strong support to the idea that large numbers of stars were forming in young galaxies at the same time that their central black holes were pulling in additional mass," said Pierre Cox, of the Institute for Space Astrophysics of the University of Paris. The astronomers believe that galaxies in the early Universe were frequently disrupted by nearby encounters with other galaxies, "feeding" the central

  19. Oxygen transport through soft contact lens and cornea: Lens characterization and metabolic modeling

    NASA Astrophysics Data System (ADS)

    Chhabra, Mahendra

    The human cornea requires oxygen to sustain metabolic processes critical for its normal functioning. Any restriction to corneal oxygen supply from the external environment (e.g., by wearing a low oxygen-permeability contact lens) can lead to hypoxia, which may cause corneal edema (swelling), limbal hyperemia, neovascularization, and corneal acidosis. The need for adequate oxygen to the cornea is a major driving force for research and development of hypertransmissible soft contact lenses (SCLs). Currently, there is no standard technique for measuring oxygen permeability (Dk) of hypertransmissible silicone-hydrogel SCLs. In this work, an electrochemistry-based polarographic apparatus was designed, built, and operated to measure oxygen permeability in hypertransmissible SCLs. Unlike conventional methods where a range of lens thickness is needed for determining oxygen permeabilities of SCLs, this apparatus requires only a single lens thickness. The single-lens permeameter provides a reliable, efficient, and economic tool for measuring oxygen permeabilities of commercial hypertransmissible SCLs. The single-lens permeameter measures not only the product Dk, but, following modification, it measures separately diffusivity, D, and solubility, k, of oxygen in hypertransmissible SCLs. These properties are critical for designing better lens materials that ensure sufficient oxygen supply to the cornea. Metabolism of oxygen in the cornea is influenced by contact-lens-induced hypoxia, diseases such as diabetes, surgery, and drug treatment, Thus, estimation of the in-vivo corneal oxygen consumption rate is essential for gauging adequate oxygen supply to the cornea. Therefore, we have developed an unsteady-state reactive-diffusion model for the cornea-contact-lens system to determine in-vivo human corneal oxygen-consumption rate. Finally, a metabolic model was developed to determine the relation between contact-lens oxygen transmissibility (Dk/L) and corneal oxygen deficiency. A

  20. Hypoplastic basement membrane of the lens anlage in the inheritable lens aplastic mouse (lap mouse).

    PubMed

    Aso, S; Baba, R; Noda, S; Ikuno, S; Fujita, M

    2000-04-01

    Adult homozygous lap mice show various eye abnormalities such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode appears to develop normally. However, the lens vesicle develops abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. Apoptotic cell death is associated with the disappearance of the lens anlage. We examined the basement membranes of the lens anlage of this mutant by immunohistochemical methods under light microscopy using antibodies against basement membrane components of the lens anlage, type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan, and entactin and by transmission electron microscopy. Immunohistochemistry showed the distribution and intensity of antibody binding to the lens anlage to be almost the same for each these antibodies regardless of the stage of gestation or whether the anlagen were from normal BALB/c or lap mice. Thus, positive continuous reactions were observed around the exterior region of the lens anlage from day 10 of gestation for type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan antibodies, and at least from day 11of gestation for entactin antibody. The basement membrane lamina densa of both normal and lap mice was shown by electron microscopy to be discontinuous at days 10 and 10.5 of gestation. However, by day 11 the lamina densa was continuous in the lens anlagen of normal mice but still discontinuous in the lap mice. By day 12 of gestation, the lamina densa had thickened markedly in normal mice, whereas in lap mice it remained discontinuous and its thinness indicated hypoplasia. These results indicate that, while all basement components examined are produced and deposited in the normal region of the lens anlage in the lap mouse, the basement membrane is, for some reason, imperfectly formed. The time at which hypoplasia of the basement membrane was observed

  1. Method and apparatus for sputtering with a plasma lens

    DOEpatents

    Anders, Andre

    2016-09-27

    A plasma lens for enhancing the quality and rate of sputter deposition onto a substrate is described herein. The plasma lens serves to focus positively charged ions onto the substrate while deflecting negatively charged ions, while at the same time due to the line of sight positioning of the lens, allowing for free passage of neutrals from the target to the substrate. The lens itself is formed of a wound coil of multiple turns, inside of which are deposed spaced lens electrodes which are electrically paired to impress an E field overtop the B field generated by the coil, the potential applied to the electrodes increasing from end to end towards the center of the lens, where the applied voltage is set to a high potential at the center electrodes as to produce a potential minimum on the axis of the lens.

  2. The cellular and molecular mechanisms of vertebrate lens development

    PubMed Central

    Cvekl, Aleš; Ashery-Padan, Ruth

    2014-01-01

    The ocular lens is a model system for understanding important aspects of embryonic development, such as cell specification and the spatiotemporally controlled formation of a three-dimensional structure. The lens, which is characterized by transparency, refraction and elasticity, is composed of a bulk mass of fiber cells attached to a sheet of lens epithelium. Although lens induction has been studied for over 100 years, recent findings have revealed a myriad of extracellular signaling pathways and gene regulatory networks, integrated and executed by the transcription factor Pax6, that are required for lens formation in vertebrates. This Review summarizes recent progress in the field, emphasizing the interplay between the diverse regulatory mechanisms employed to form lens progenitor and precursor cells and highlighting novel opportunities to fill gaps in our understanding of lens tissue morphogenesis. PMID:25406393

  3. System and Method for Null-Lens Wavefront Sensing

    NASA Technical Reports Server (NTRS)

    Hill, Peter C. (Inventor); Thompson, Patrick L. (Inventor); Aronstein, David L. (Inventor); Bolcar, Matthew R. (Inventor); Smith, Jeffrey S. (Inventor)

    2015-01-01

    A method of measuring aberrations in a null-lens including assembly and alignment aberrations. The null-lens may be used for measuring aberrations in an aspheric optic with the null-lens. Light propagates from the aspheric optic location through the null-lens, while sweeping a detector through the null-lens focal plane. Image data being is collected at locations about said focal plane. Light is simulated propagating to the collection locations for each collected image. Null-lens aberrations may extracted, e.g., applying image-based wavefront-sensing to collected images and simulation results. The null-lens aberrations improve accuracy in measuring aspheric optic aberrations.

  4. Measuring phacoemulsification groove depth using probe tip dimensions and biometry lens thickness readings

    PubMed Central

    Dunne, Kevin; Buller, Alex J

    2016-01-01

    Aim To describe a useful technique utilizing lens thickness from biometric data as well as phacoemulsification (phaco) probe tip dimensions, in order to more accurately determine safe groove depth during divide and conquer techniques for cataract surgery. Methods Single center, selection of patients for cataract surgery deemed low risk and suitable for surgical teaching cases. Individual lens thickness measurements from biometry were calculated with known phaco tip dimensions to give an individualized safe number of phaco tip depths for grooving during divide and conquer. This technique was then applied during cataract surgery. Results Utilization of this technique allows calculation and determination of an appropriate number of phaco tip depths of grooving for each individual patient. This technique was applied as a teaching tool for surgical trainees, with subsequent successful safe cataract surgeries completed. No posterior capsule ruptures were noted for these cases. Conclusion By combining the biometric measurements of an individual patient’s lens thickness together with known phaco tip dimensions, individualized safe groove depths can be theoretically determined and applied during divide and conquer cataract surgery. PMID:27574395

  5. Inhomogeneous Lens Structures for Integrated Optics.

    NASA Astrophysics Data System (ADS)

    Finlayson, Neil

    Available from UMI in association with The British Library. Requires signed TDF. The thesis is concerned with the design, analysis, fabrication and evaluation of integrated optic lenses which are inhomogeneous either in physical shape or in refractive index profile. Connections are made between the study of these lenses and the exciting new field of optical computing. A special class of non-uniform lenses forms the main area of interest in the present study. Historically, the development of these lenses has followed two distinct lines. In one method the optical path is made to vary directly, whilst the other method involves controlling the physical path, and thus the optical path, through the principle of equivalence. The dual development has been continued in the field of integrated optics, where lenses based on direct control of the optical path are termed variable-index lenses and those based on physical path control are termed geodesic lenses. The perfect variable -index lens studied in this work was the well-known Luneburg lens. The design formulae for both types of lens are presented. A simpler lens, of spherical geometry, is also presented. Chapter three investigates the problems involved in modelling fabrication conditions in a thermal-evaporation -in-vacuum environment so that lens profiles can actually be constructed. Chapter four goes into methods of tracing rays through these lenses in some detail. The beam-propagation method (BPM) is used to study diffraction and associated effects in inhomogeneous lenses. Negative focal shifts are reported which are not predicted by geometrical optics or the usual approximate diffraction theories. The fabrication of lenses is considered. Planar waveguide measurements carried out on the various materials used in the study are presented. A major problem in the fabrication of geodesic lenses, that of obtaining a uniform waveguide layer over the complete lens area, is dealt with in some detail. Extensive tests on the

  6. Spontaneous dislocation of lens bag with acrylic lens after uneventful cataract surgery – unusual complication of cataract surgery

    PubMed Central

    Shah, Mehul A.; Shah, Shreya M.; Mehta, Ruchir; Shah, Prerna

    2015-01-01

    Introduction: Spontaneous dislocation of intraocular lens with bag is rare. Methods: We report a case of a 56-year-old male who presented with spontaneous anterior dislocation of an in-the-bag intraocular lens 3 years after manual small incision cataract surgery. He had undergone manual small incision cataract surgery with foldable acrylic intraocular lens implantation, and 18 months after cataract surgery ND: YAG capsulotomy with uneventful post capsulotomy follow-up. 17 months after capsulotomy, the patient presented with sudden decrease of vision. On anterior segment examination, the intraocular lens with bag was dislocated into the anterior chamber. Result: It was managed with intraocular lens explantation with bag, anterior vitrectomy and sclera fixated intraocular lens. Conclusion: Spontaneous intraocular lens dislocation with bag is possible after 1.5 years of uneventful surgery which may be managed using different techniques. PMID:27625955

  7. Elemental profiles in Emory mouse lens

    SciTech Connect

    Bagchi, M.; Emanuel, K. )

    1991-01-01

    Energy dispersive x-ray microprobe analysis was used to determine the distribution of chloride, potassium, phosphorus and sulfur in the epithelial cells of the lenses obtained from 3 to 7 month old Emory mice and 7 month old cataract resistant strain of Emory mice. Rapidly frozen lenses were fractured in the frozen state and lyophilized. The anterior epithelial cells were analyzed from equator to equator. The results show that the epithelial cells of the 7 month old Emory mouse lens have considerably higher amounts of chloride, sulfur, potassium and phosphorus. Presence of increased amount of potassium in the epithelial cells is intriguing. The data obtained from these experiments show that the changes in the elemental levels of epithelial cells are similar to observed alteration found in the lens fiber mass of 7 month old Emory mouse.

  8. Laser diode assembly including a cylindrical lens

    DOEpatents

    Snyder, J.J.; Reichert, P.

    1992-01-14

    The present invention provides a diffraction limited, high numerical aperture (fast) cylindrical microlens. The method for making the microlens is adaptable to produce a cylindrical lens that has almost any shape on its optical surfaces. The cylindrical lens may have a shape, such as elliptical or hyperbolic, designed to transform some particular given input light distribution into some desired output light distribution. In the method, the desired shape is first formed in a glass preform. Then, the preform is heated to the minimum drawing temperature and a fiber is drawn from it. The cross-sectional shape of the fiber bears a direct relation to the shape of the preform from which it was drawn. During the drawing process, the surfaces become optically smooth due to fire polishing. 11 figs.

  9. Laser diode assembly including a cylindrical lens

    DOEpatents

    Snyder, James J.; Reichert, Patrick

    1992-01-01

    The present invention provides a diffraction limited, high numerical aperture (fast) cylindrical microlens. The method for making the microlens is adaptable to produce a cylindrical lens that has almost any shape on its optical surfaces. The cylindrical lens may have a shape, such as elliptical or hyperbolic, designed to transform some particular given input light distribution into some desired output light distribution. In the method, the desired shape is first formed in a glass preform. Then, the preform is heated to the minimum drawing temperature and a fiber is drawn from it. The cross-sectional shape of the fiber bears a direct relation to the shape of the preform from which it was drawn. During the drawing process, the surfaces become optically smooth due to fire polishing.

  10. A polycarbonate ophthalmic-prescription lens series.

    PubMed

    Davis, J K

    1978-08-01

    Improvements in polycarbonate material, production techniques, and scratch-resistant coatings, combined with a process-oriented design, have resulted in a precision lens series. Surface quality is comparable to that of untreated glass ophthalmic lenses. The repeatability of the process results in closely controlled axial power and off-axis performance. For most lens prescriptions, the ANSI Z80.1 optical-center specifications for prescription accuracy are maintained through a total field of view of 40 deg for an 8-mm range of center-of-rotation distances. Off-axis astigmatism is controlled for near-point seeing. The lenses are both lighter and thinner than those of crown glass. A scratch-resistant coating reduces the reflections normally associated with high-index (1.586) materials. Impact resistance exceeds that required by ANSI Z80.7 and is many times that required by ANSI Z80.1.

  11. Pulser for the Tevatron electron lens gun

    SciTech Connect

    Iouri Terechkine et al.

    2004-05-18

    To compensate for beam-beam interaction in Tevatron, an ''electron lens'' is considered to be an effective instrument. When a bunch of electrons with energy in the range (10-16) kV is overlapping with a bunch of antiprotons, the resulting focusing force for antiprotons can be adjusted by changing the electron beam current and by profiling its radial distribution. There exist several scenarios of how the system must function. According to one of them, an electron gun that supplies electrons must be fed by voltage pulses that follow with the frequency of antiproton bunches circulating in the Tevatron, which is about 2.5 MHz. To provide focusing tailored for each individual antiproton bunch, a modulator of the gun (pulser) must allow pulse-to-pulse voltage change. This report will cover main approaches to a design of a pulser for use with the gun of the Tevatron Electron Lens.

  12. Contact lens-associated nocardial necrotizing scleritis.

    PubMed

    Rush, Ryan B

    2013-08-01

    A 52 year-old, contact lens-wearing man presented with progressive right eye pain and redness for one month. He had been evaluated and treated for necrotizing scleritis by multiple eye care specialists prior to presentation. He underwent a complete systemic work-up for both autoimmune and infectious causes of scleritis, including a culture. The culture revealed heavy growth of Nocardia asteroides complexes. The patient was treated with topical amikacin and oral Bactrim. Following several weeks of antibiotic treatment, the patient's infection resolved completely, and his visual acuity returned to baseline status. Nocardia is a rare but potentially devastating cause of necrotizing scleritis that may affect contact lens wearers without an associated keratitis. Prompt recognition and early treatment with appropriate antimicrobial agents are critical to achieve a favorable outcome. PMID:23908577

  13. Hyperbolic metamaterial lens with hydrodynamic nonlocal response.

    PubMed

    Yan, Wei; Mortensen, N Asger; Wubs, Martijn

    2013-06-17

    We investigate the effects of hydrodynamic nonlocal response in hyperbolic metamaterials (HMMs), focusing on the experimentally realizable parameter regime where unit cells are much smaller than an optical wavelength but much larger than the wavelengths of the longitudinal pressure waves of the free-electron plasma in the metal constituents. We derive the nonlocal corrections to the effective material parameters analytically, and illustrate the noticeable nonlocal effects on the dispersion curves numerically. As an application, we find that the focusing characteristics of a HMM lens in the local-response approximation and in the hydrodynamic Drude model can differ considerably. In particular, the optimal frequency for imaging in the nonlocal theory is blueshifted with respect to that in the local theory. Thus, to detect whether nonlocal response is at work in a hyperbolic metamaterial, we propose to measure the near-field distribution of a hyperbolic metamaterial lens. PMID:23787690

  14. Amorphous materials molded IR lens progress report

    NASA Astrophysics Data System (ADS)

    Hilton, A. R., Sr.; McCord, James; Timm, Ronald; Le Blanc, R. A.

    2008-04-01

    Amorphous Materials began in 2000 a joint program with Lockheed Martin in Orlando to develop molding technology required to produce infrared lenses from chalcogenide glasses. Preliminary results were reported at this SPIE meeting by Amy Graham1 in 2003. The program ended in 2004. Since that time, AMI has concentrated on improving results from two low softening glasses, Amtir 4&5. Both glasses have been fully characterized and antireflection coatings have been developed for each. Lenses have been molded from both glasses, from Amtir 6 and from C1 Core glass. A Zygo unit is used to evaluate the results of each molded lens as a guide to improving the molding process. Expansion into a larger building has provided room for five production molding units. Molded lens sizes have ranged from 8 mm to 136 mm in diameter. Recent results will be presented

  15. Stretched Lens Array Photovoltaic Concentrator Technology Developed

    NASA Technical Reports Server (NTRS)

    Piszczor, Michael F., Jr.; O'Neill, Mark J.

    2004-01-01

    Solar arrays have been and continue to be the mainstay in providing power to nearly all commercial and government spacecraft. Light from the Sun is directly converted into electrical energy using solar cells. One way to reduce the cost of future space power systems is by minimizing the size and number of expensive solar cells by focusing the sunlight onto smaller cells using concentrator optics. The stretched lens array (SLA) is a unique concept that uses arched Fresnel lens concentrators to focus sunlight onto a line of high-efficiency solar cells located directly beneath. The SLA concept is based on the Solar Concentrator Array with Refractive Linear Element Technology (SCARLET) design that was used on NASA's New Millennium Deep Space 1 mission. The highly successful asteroid/comet rendezvous mission (1998 to 2001) demonstrated the performance and long-term durability of the SCARLET/SLA solar array design and set the foundation for further improvements to optimize its performance.

  16. A stereoscopic lens for digital cinema cameras

    NASA Astrophysics Data System (ADS)

    Lipton, Lenny; Rupkalvis, John

    2015-03-01

    Live-action stereoscopic feature films are, for the most part, produced using a costly post-production process to convert planar cinematography into stereo-pair images and are only occasionally shot stereoscopically using bulky dual-cameras that are adaptations of the Ramsdell rig. The stereoscopic lens design described here might very well encourage more live-action image capture because it uses standard digital cinema cameras and workflow to save time and money.

  17. Does negative refraction make a perfect lens?

    NASA Astrophysics Data System (ADS)

    Ramm, A. G.

    2008-10-01

    A discussion of a question, studied earlier by Veselago in 1967 and by Pendry in 2000, is given. The question is: can a slab of the material with negative refraction make a perfect lens? Pendry's conclusion was: yes, it can. Our conclusion is: no, in practice it cannot, because of the fluctuations of the refraction coefficient of the slab. Resolution ability of linear isoplanatic optical instruments is discussed.

  18. 40 Eridani and the gravitational lens effect

    NASA Technical Reports Server (NTRS)

    Feibelman, Walter A.

    1986-01-01

    Observations covering a period of 20 years show that the large proper motion (4.08 arcsec/yr) of the nearly triple system 40 Eridani-ABC will cause its brightest member, A, to pass within 3 arcsec of a faint background star. The originally hoped-for primary gravitational lens effect will therefore not take place although a minor secondary effect may occur near the time of closest approach on June 1, 1987.

  19. Endoscopic measurements using a panoramic annular lens

    NASA Technical Reports Server (NTRS)

    Gilbert, John A.; Matthys, Donald R.

    1992-01-01

    The objective of this project was to design, build, demonstrate, and deliver a prototype system for making measurements within cavities. The system was to utilize structured lighting as the means for making measurements and was to rely on a stationary probe, equipped with a unique panoramic annular lens, to capture a cylindrical view of the illuminated cavity. Panoramic images, acquired with a digitizing camera and stored in a desk top computer, were to be linearized and analyzed by mouse-driven interactive software.

  20. Providing Study Notes: Comparison of Three Types of Notes for Review.

    ERIC Educational Resources Information Center

    Kiewra, Kenneth A.; And Others

    1988-01-01

    Forty-four undergraduates received different types of notes for review of a lecture (complete text, linear outline, or matrix), or received no notes. Any form of notes increased performance over no notes, with matrix and outline notes producing higher recall and matrix notes producing greatest transfer. (SLD)

  1. Development of a new contact lens multipurpose solution: Comparative analysis of microbiological, biological and clinical performance

    PubMed Central

    Kilvington, Simon; Huang, Ling; Kao, Eugenia; Powell, Charles H.

    2010-01-01

    Purpose Antimicrobial, cytotoxicity and clinical performance of a new soft contact lens multi-purpose solution (COMPLETE® RevitaLens) based on polyquaternium-1 and alexidine dihydrochloride (NuMPS) was evaluated. Methods Antimicrobial efficacy was assessed according to ISO 14729 for both biocidal and regimen performance against bacteria and fungi. Acanthamoeba efficacy was tested along with ability to retain antimicrobial activity on partial evaporation. In vitro cytotoxicity of NuMPS and OPTI-FREE® RepleniSH® MPS (MPS-3) was assessed based on ISO 10993-5 and United States Pharmacopeia (USP) methods. In addition, a 3 month, double-masked, parallel group clinical trial comparing safety and acceptability with respect to MPS-3 was conducted with 4 silicone hydrogel (SiHy) and FDA Group IV lens types. Results NuMPS showed broad antimicrobial efficacy, including Acanthamoeba, giving a 3–4 log10 reduction in viability after 6 hours contact time. NuMPS also passed ISO 14729 regimens with SiHy and etafilcon lenses for bacteria, fungi and also Acanthamoeba. The cytotoxicity of NuMPS was equivalent or better compared to MPS-3. In the clinical trial, there was no statistically significant between-group difference in corneal staining (p > 0.05). Patients using MPS-3 had more adverse events than patients using NuMPS: 11.8 % (11/93) versus 2.8 % (5/177), respectively, (p < 0.05). There were no differences noted in cleanliness or wearing comfort (p > 0.05). Conclusion Taken together, the results of these studies indicate that the NuMPS is a novel and effective soft contact lens care solution.

  2. Systematic errors in strong lens modeling

    NASA Astrophysics Data System (ADS)

    Johnson, Traci Lin; Sharon, Keren; Bayliss, Matthew B.

    2015-08-01

    The lensing community has made great strides in quantifying the statistical errors associated with strong lens modeling. However, we are just now beginning to understand the systematic errors. Quantifying these errors is pertinent to Frontier Fields science, as number counts and luminosity functions are highly sensitive to the value of the magnifications of background sources across the entire field of view. We are aware that models can be very different when modelers change their assumptions about the parameterization of the lensing potential (i.e., parametric vs. non-parametric models). However, models built while utilizing a single methodology can lead to inconsistent outcomes for different quantities, distributions, and qualities of redshift information regarding the multiple images used as constraints in the lens model. We investigate how varying the number of multiple image constraints and available redshift information of those constraints (ex., spectroscopic vs. photometric vs. no redshift) can influence the outputs of our parametric strong lens models, specifically, the mass distribution and magnifications of background sources. We make use of the simulated clusters by M. Meneghetti et al. and the first two Frontier Fields clusters, which have a high number of multiply imaged galaxies with spectroscopically-measured redshifts (or input redshifts, in the case of simulated clusters). This work will not only inform upon Frontier Field science, but also for work on the growing collection of strong lensing galaxy clusters, most of which are less massive and are capable of lensing a handful of galaxies, and are more prone to these systematic errors.

  3. Method of crosstalk reduction using lenticular lens

    NASA Astrophysics Data System (ADS)

    Lee, Hyoung; Lee, Kwang-Hoon; Kim, Sung-Kyu; Sohn, Kwang-Hoon

    2012-06-01

    Generally non-glass type three dimensional stereoscopic display systems should be considering human factor. Human factor include the crosstalk, motion parallax, types of display, lighting, age, unknown aspects around the human factors issues and user experience. Among these human factors, the crosstalk is very important human factor because; it reduces 3D effect and induces eye fatigue or dizziness. In these reason, we considered method of reduction crosstalk in three dimensional stereoscopic display systems. In this paper, we suggest method of reduction crosstalk using lenticular lens. Optical ray derived from projection optical system, converted to viewing zone shape by convolution of two apertures. In this condition, we can minimize and control the beam width by optical properties of lenticular lens (refractive, pitch, thickness, radius of curvature) and optical properties of projector (projection distance, optical features). In this processing, Gaussian distribution type shape is converted to rectangular distribution type shape. According to the beam width reduction will be reduce crosstalk, and it was verified used to lenticular lens.

  4. Perfect lens makes a perfect trap

    NASA Astrophysics Data System (ADS)

    Lu, Zhaolin; Murakowski, Janusz; Schuetz, Christopher A.; Shi, Shouyuan; Schneider, Garrett J.; Samluk, Jesse P.; Prather, Dennis W.

    2006-03-01

    In this work, we present for the first time a new and realistic application of the “perfect lens”, namely, electromagnetic traps (or tweezers). We combined two recently developed techniques, 3D negative refraction flat lenses (3DNRFLs) and optical tweezers, and experimentally demonstrated the very unique advantages of using 3DNRFLs for electromagnetic traps. Super-resolution and short focal distance of the flat lens result in a highly focused and strongly convergent beam, which is a key requirement for a stable and accurate electromagnetic trap. The translation symmetry of 3DNRFL provides translation-invariance for imaging, which allows an electromagnetic trap to be translated without moving the lens, and permits a trap array by using multiple sources with a single lens. Electromagnetic trapping was demonstrated using polystyrene particles in suspension, and subsequent to being trapped to a single point, they were then accurately manipulated over a large distance by simple movement of a 3DNRFL-imaged microwave monopole source.

  5. Meibomian therapy in problematic contact lens wear.

    PubMed

    Paugh, J R; Knapp, L L; Martinson, J R; Hom, M M

    1990-11-01

    Utilizing the principal diagnostic criterion of an absent or cloudy Meibomian gland secretion upon repeated expression, patients with Meibomian gland dysfunction (MGD) were selected to participate in a study of the efficacy of lid scrubs and massage in the treatment of MGD. Twenty-one patients with contact lens intolerance unrelated to lens, care system, or health factors were randomly assigned to treatment of one eye with common clinical therapy for MGD. After 2 weeks of treatment, gland expression, biomicroscopy, staining, comfort, and fluorescein breakup time were assessed in a masked manner. Analyzed using a paired-data t-test, the results indicated a significant increase in mean tear film breakup time (BUT) in the treated eye at follow-up compared to baseline (mean increase = 4.0 s, p = 0.0001). The control eye demonstrated no significant change (mean increase = 0.2 s, p = 0.5955). These objective results were corroborated by reports of improved subjective comfort with contact lens wear after therapy.

  6. Ageing of glutathione reductase in the lens.

    PubMed

    Zhang, W Z; Augusteyn, R C

    1994-07-01

    The distribution of glutathione reductase activity in concentric layers from the lens has been determined as a function of age for 16 species. Primate lenses have almost ten times the level of glutathione reductase found in other species. Comparison with the activity of hexokinase revealed that this is not due to a higher overall rate of metabolism in these lenses. By contrast, the higher activity found in bird and fish lenses reflects a higher metabolic activity in these tissues. In all species, a gradient of activity was observed with the highest specific activity in the outermost cortical fibres, decreasing to virtually no activity in the inner parts of the tissue. No alterations were found in this gradient with increasing age, other than an increase in the amount of nuclear tissue essentially devoid of activity. The maximum activity in the outer cortical fibres was the same, regardless of the age of the lens. The time taken, in different species, for the specific activity to decrease by half, was estimated from the rate of protein accumulation. This time was found to vary from a few days to several years, indicating that the decrease in activity is not due to ageing but rather, it is related to the maturation of fibre cells. These observations are discussed in terms of current concepts of lens ageing and cataract formation. PMID:7835401

  7. CYLINDER LENS ALIGNMENT IN THE LTP

    SciTech Connect

    TAKACS, P.Z.

    2005-07-26

    The Long Trace Profiler (LTP), is well-suited for the measurement of the axial figure of cylindrical mirrors that usually have a long radius of curvature in the axial direction but have a short radius of curvature in the sagittal direction. The sagittal curvature causes the probe beam to diverge in the transverse direction without coming to a focus on the detector, resulting in a very weak signal. It is useful to place a cylinder lens into the optical system above the mirror under test to refocus the sagittal divergence and increase the signal level. A positive cylinder lens can be placed at two positions above the surface: the Cat's Eye reflection position and the Wavefront-Matching position. The Cat's Eye position, is very tolerant to mirror misalignment, which is not good if absolute axial radius of curvature is to be measured. Lateral positioning and rotational misalignments of lens and the mirror combine to produce unusual profile results. This paper looks at various alignment issues with measurements and by raytrace simulations to determine the best strategy to minimize radius of curvature errors in the measurement of cylindrical aspheres.

  8. Types of Traumatic Lens Dislocations at Larkana.

    PubMed

    Shah, Syed Imtiaz Ali; Shah, Shujaat Ali; Rai, Partab; Siddiqui, Shahid Jamal; Abbasi, Safdar Ali; Katpar, Naeem Akhtar

    2016-08-01

    The objective of this study was to determine the pattern of traumatic lens dislocations presenting at our institute. This may help develop the preventive strategies. The number of cases of traumatic lens dislocations, presented at the Department of Ophthalmology, Chandka Medical College, Larkana, Pakistan, from January 2002 to June 2015, were 59 including 61.02% (n=36) males and 38.98% (n=23) females. Cause of trauma was wood or plant impalement in 35.6% (n=21) cases, cracker blast in 13.55% (n=8) cases, fall on ground in 11.86% (n=7) cases, penetrating injuries with needle, scissors or knife in 10.16% (n=6) cases, road traffic accidents in 10.16% (n=6) cases, sports injuries (cricket ball and gulle danda) in 8.47% (n=5) cases, firearm injuries in 5.1% (n=3) cases, and fist hitting in 5.1% (n=3) cases. Lens was dislocated posteriorly in 33.90% (n=20) cases, anteriorly in 25.42% (n=15) cases, inferiorly in 11.86% (n=7) cases, medially in 10.17% (n=6) cases, laterally in 10.17% (n=6) cases, superiorly in 6.78% (n=4) cases, and a single (1.69%) case of lenticele was seen. PMID:27539772

  9. Ultrasound field measurement using a binary lens

    PubMed Central

    Clement, G.T.; Nomura, H.; Kamakura, T.

    2014-01-01

    Field characterization methods using a scattering target in the absence of a point-like receiver have been well described in which scattering is recorded by a relatively large receiver located outside the field of measurement. Unfortunately, such methods are prone to artifacts due to averaging across the receiver surface. To avoid this problem while simultaneously increasing the gain of a received signal, the present study introduces a binary plate lens designed to focus spherically-spreading waves onto a planar region having a nearly-uniform phase proportional to that of the target location. The lens is similar to a zone plate, but modified to produce a biconvex-like behavior, such that it focuses both planar and spherically spreading waves. A measurement device suitable for characterizing narrowband ultrasound signals in air is designed around this lens by coupling it to a target and planar receiver. A prototype device is constructed and used to characterize the field of a highly-focused 400 kHz air transducer along 2 radial lines. Comparison of the measurements with numeric predictions formed from nonlinear acoustic simulation showed good relative pressure correlation, with mean differences of 10% and 12% over center 3dB FWHM drop and 12% and 17% over 6dB. PMID:25643084

  10. Compound refractive X-ray lens

    DOEpatents

    Nygren, David R.; Cahn, Robert; Cederstrom, Bjorn; Danielsson, Mats; Vestlund, Jonas

    2000-01-01

    An apparatus and method for focusing X-rays. In one embodiment, his invention is a commercial-grade compound refractive X-ray lens. The commercial-grade compound refractive X-ray lens includes a volume of low-Z material. The volume of low-Z material has a first surface which is adapted to receive X-rays of commercially-applicable power emitted from a commercial-grade X-ray source. The volume of low-Z material also has a second surface from which emerge the X-rays of commercially-applicable power which were received at the first surface. Additionally, the commercial-grade compound refractive X-ray lens includes a plurality of openings which are disposed between the first surface and the second surface. The plurality of openings are oriented such that the X-rays of commercially-applicable power which are received at the first surface, pass through the volume of low-Z material and through the plurality openings. In so doing, the X-rays which emerge from the second surface are refracted to a focal point.

  11. Variations in the corneal surface temperature with contact lens wear.

    PubMed

    Ooi, E H; Ng, E Y K; Purslow, C; Acharya, R

    2007-05-01

    This paper presents the two-dimensional simulation of heat propagation in the human eye model during contact lens wear with finite element analysis. Three types of contact lens are studied: Lotrafilcon A, Balafilcon A, and Etafilcon A. The models are solved for both steady and transient solutions. The corneal surface temperature during contact lens wear is found to decrease (average, 0.52 +/- 0.05 degrees C compared with a bare cornea for all lens types). A contact lens with a higher water content has a lower steady state temperature than a contact lens with a lower water content does. Various initial temperatures for the contact lens are found to affect the first 400 s of the temperature variation. When the initial temperature is lower than the corneal temperature, a reduction in temperature is observed during contact lens insertion while the opposite is observed when the initial temperature is higher than the corneal temperature. The increase in evaporation rate when a contact lens is worn increases the cooling effect on the ocular surface. This is suggested to be the cause of lower corneal surface temperature when wearing a contact lens.

  12. Radiation dose to the lens and cataract formation

    SciTech Connect

    Henk, J.M.; Whitelocke, R.A.F.; Warrington, A.P.; Bessell, E.M. )

    1993-04-02

    The purpose of this work was to determine the radiation tolerance of the lens of the eye and the incidence of radiation-induced lens changes in patients treated by fractionated supervoltage radiation therapy for orbital tumors. Forty patients treated for orbital lymphoma and pseudotumor with tumor doses of 20--40 Gy were studied. The lens was partly shielded using lead cylinders in most cases. The dose to the germinative zone of the lens was estimated by measurements in a tissue equivalent phantom using both film densitometry and thermoluminescent dosimetry. Opthalmological examination was performed at 6 monthly intervals after treatment. The lead shield was found to reduce the dose to the germinative zone of the lens to between 36--50% of the tumor dose for Cobalt beam therapy, and to between 11--18% for 5 MeV x-rays. Consequently, the lens doses were in the range 4.5--30 Gy in 10--20 fractions. Lens opacities first appeared from between 3 and 9 years after irradiation. Impairment of visual acuity ensued in 74% of the patients who developed lens opacities. The incidence of lens changes was strongly dose-related. None was seen after doses of 5 Gy or lower, whereas doses of 16.5 Gy or higher were all followed by lens opacities which impaired visual acuity. The largest number of patients received a maximum lens dose of 15 Gy; in this group the actuarial incidence of lens opacities at 8 years was 57% with visual impairment in 38%. The adult lens can tolerate a total dose of 5 Gy during a fractionated course of supervoltage radiation therapy without showing any changes. Doses of 16.5 Gy or higher will almost invariably lead to visual impairment. The dose which causes a 50% probability of visual impairment is approximately 15 Gy. 10 refs., 4 figs., 1 tab.

  13. A systematic review of strong gravitational lens modeling software

    NASA Astrophysics Data System (ADS)

    Lefor, Alan T.; Futamase, Toshifumi; Akhlaghi, Mohammad

    2013-07-01

    Despite expanding research activity in gravitational lens modeling, there is no particular software which is considered a standard. Much of the gravitational lens modeling software is written by individual investigators for their own use. Some gravitational lens modeling software is freely available for download but is widely variable with regard to ease of use and quality of documentation. This review of 13 software packages was undertaken to provide a single source of information. Gravitational lens models are classified as parametric models or non-parametric models, and can be further divided into research and educational software. Software used in research includes the GRAVLENS package (with both gravlens and lensmodel), Lenstool, LensPerfect, glafic, PixeLens, SimpLens, Lensview, and GRALE. In this review, GravLensHD, G-Lens, Gravitational Lensing, lens and MOWGLI are categorized as educational programs that are useful for demonstrating various aspects of lensing. Each of the 13 software packages is reviewed with regard to software features (installation, documentation, files provided, etc.) and lensing features (type of model, input data, output data, etc.) as well as a brief review of studies where they have been used. Recent studies have demonstrated the utility of strong gravitational lensing data for mass mapping, and suggest increased use of these techniques in the future. Coupled with the advent of greatly improved imaging, new approaches to modeling of strong gravitational lens systems are needed. This is the first systematic review of strong gravitational lens modeling software, providing investigators with a starting point for future software development to further advance gravitational lens modeling research. http://www.ephysics.org/mowgli/

  14. Dry Eye in Pediatric Contact Lens Wearers

    PubMed Central

    Greiner, Katie L.; Walline, Jeffrey J.

    2015-01-01

    Objectives To determine whether children who wear contact lenses truly have fewer dry eye complaints than adults. Methods Ninety-four pediatric contact lens wearers, ages 8 to 14 years, were recruited and given the Contact Lens Dry Eye Questionnaire (CLDEQ) short form. The survey is designed to diagnose dry eye syndrome by obtaining information on the frequency of dryness and light sensitivity and their corresponding intensity levels within the first two hours of putting in the lenses, in the middle of the day, and at the end of the day. The responses were scored by multiplying the frequency by the average intensity and a constant. A composite score was calculated by subtracting the photophobia score from the dryness score, and the results were compared to adult samples from the literature. The questionnaire also asked whether the subject thought he/she had dry eyes while wearing contact lenses. Subjects that thought they had dry eyes and had a CLDEQ composite score >0.03 were diagnosed with dry eye. Subjects who were unsure if they dry eye or said they did not have dry eye but scored >1.29 were also diagnosed with dry eye. Results The average (± SD) age of the sample was 11.7 ± 1.5 years, 56.4% were female, 59.6% were white, and 19.1% were black. The mean (± SD) CLDEQ composite score was 0.25 ±0.50 (range= -1.20 to 1.45). In the literature, the adult mean (± SD) CLDEQ composite score was 1.02 ±0.80 (range= -0.74 to 4.50). Of the 94 surveys collected, 4.3% of children were categorized with dry eye compared to 56.2% of adults who completed the CLDEQ survey in the adult study. Conclusions Pediatric contact lens wearers have fewer complaints about dry eyes than adult contact lens wearers, which may be due to improved tear film, differences in reporting of symptoms, or modality of contact lens wear. PMID:21060258

  15. DISCOVERY OF A QUADRUPLE LENS IN CANDELS WITH A RECORD LENS REDSHIFT z = 1.53

    SciTech Connect

    Van der Wel, A.; Van de Ven, G.; Maseda, M.; Rix, H. W.; Rudnick, G. H.; Grazian, A.; Finkelstein, S. L.; Koo, D. C.; Faber, S. M.; Kocevski, D. D.

    2013-11-01

    Using spectroscopy from the Large Binocular Telescope and imaging from the Hubble Space Telescope we discovered the first strong galaxy lens at z {sub lens} > 1. The lens has a secure photometric redshift of z = 1.53 ± 0.09 and the source is spectroscopically confirmed at z = 3.417. The Einstein radius (0.''35; 3.0 kpc) encloses 7.6 × 10{sup 10} M {sub ☉}, with an upper limit on the dark matter fraction of 60%. The highly magnified (40×) source galaxy has a very small stellar mass (∼10{sup 8} M {sub ☉}) and shows an extremely strong [O III]{sub 5007Å} emission line (EW{sub 0} ∼ 1000 Å) bolstering the evidence that intense starbursts among very low-mass galaxies are common at high redshift.

  16. Novel Scanning Lens Instrument for Evaluating Fresnel Lens Performance: Equipment Development and Initial Results (Presentation)

    SciTech Connect

    Herrero, R.; Miller, D. C.; Kurtz, S. R.; Anton, I.; Sala, G.

    2013-07-01

    A system dedicated to the optical transmittance characterization of Fresnel lenses has been developed at NREL, in collaboration with the UPM. The system quantifies the optical efficiency of the lens by generating a performance map. The shape of the focused spot may also be analyzed to understand change in the lens performance. The primary instrument components (lasers and CCD detector) have been characterized to confirm their capability for performing optical transmittance measurements. Measurements performed on SoG and PMMA lenses subject to a variety of indoor conditions (e.g., UV and damp heat) identified differences in the optical efficiency of the evaluated lenses, demonstrating the ability of the Scanning Lens Instrument (SLI) to distinguish between the aged lenses.

  17. Notes.

    ERIC Educational Resources Information Center

    Physics Teacher, 1979

    1979-01-01

    Some topics included are: the relative merits of a programmable calculator and a microcomputer; the advantages of acquiring a sound-level meter for the laboratory; how to locate a virtual image in a plane mirror; center of gravity of a student; and how to demonstrate interference of light using two cords.

  18. FEM simulation of the human lens compared to ex vivo porcine lens cutting pattern: a possible treatment of presbyopia

    NASA Astrophysics Data System (ADS)

    Ripken, T.; Breitenfeld, P.; Fromm, M.; Oberheide, U.; Gerten, G.; Lubatschowski, H.

    2006-02-01

    The most probable reason for presbyopia is an age related loss of elasticity of the lens. It progresses typically during the whole life and at the age of about 45 it leads to a considerable loss of the ability to accommodate within the next decade. However, both, the ciliary muscle and the lens capsule stay active and elastic, respectively. With respect to this, one concept is to regain the deformability of the lens without changing the capsule or zonular apparatus. Since the investigations of Ripken et al. proofed that the flexibility of the presbyopic lens tissue can be increased through the creation of fs-laser induced microcuts inside the lens, this is one possible approach to treat presbyopia. On this account a finite-element-method model with ANSYS of the human lens during accommodation will be presented. The analysis premises all lens materials to be linear elastic and allow large displacements. A first analysis of this method for the treatment of presbyopia is accomplished. Therefore the mechanical analysis of untreated and treated lens are compared. In addition ex-vivo elasticity measurements of untreated and treated lenses will be presented. As a result an improvement of the flexibility of the lens tissue is found and as its consequence a change of the lens radii of curvature is established. After suitable processing of the output data the change in optical power between untreated and treated lenses are calculated. The finite element simulation shows similar behaviour compared to the treated porcine lenses.

  19. Studies of gravitational lens systems discovered in the Cosmic Lens All-Sky Survey

    NASA Astrophysics Data System (ADS)

    Rusin, David Joseph

    2001-11-01

    This thesis describes research conducted on and inspired by the Cosmic Lens All-Sky Survey (CLASS), which searches for new cases of gravitational lensing among compact radio sources. CLASS aims to provide the largest and best-studied sample of lens systems for use in constraining the properties of galaxy mass distributions, determining the Hubble parameter and placing limits on the cosmological constant. The goal of this thesis was to complete observations of the CLASS sample, discover and thoroughly investigate new lenses, and apply them to interesting astrophysical problems. We begin with a detailed overview of the CLASS project, including scientific goals, the radio source sample, survey observations, candidate selection and follow-ups. Results are then presented from the third phase of the CLASS survey (CLASS-3), which yielded three new gravitational lens systems. 130850+054 and 131152+199 both consist of a pair of lensed images. 131359+154 features six images of a single source, and is the first arcsecond-scale system in which a source is lensed into more than four images. We also present observations and modeling of the CLASS-2 gravitational lens B2319+051. We use the absence of detectable central images in deep radio maps of CLASS lens systems to place powerful constraints on the inner mass profiles of leasing galaxies. These analyses imply that the profile slopes cannot be much shallower than isothermal. Finally, we consider the relative frequency of two and four-image lens systems, and demonstrate that there is a statistically significant overdensity of quads in the CLASS sample. We investigate a range of factors that may be increasing the frequency of radio quads, including external shear fields, mass distributions flatter than the light, shallow leasing mass profiles, finite core radii, satellite galaxies, and alterations to the luminosity function for faint flat-spectrum radio sources. Surprisingly, none of these mechanisms provide a particularly

  20. A Note on Reverse Derivations

    ERIC Educational Resources Information Center

    Samman, M.

    2005-01-01

    In this note, the notion of reverse derivation is studied. It is shown that in the class of semiprime rings, this notion coincides with the usual derivation when it maps a semiprime ring into its centre. However, we provide some examples to show that it is not the case in general.

  1. Challenging the "Cliffs Notes" Syndrome.

    ERIC Educational Resources Information Center

    Karsten, Ernie

    1989-01-01

    Presents an approach to teaching Pierre Boulle's novella, "Face of a Hero," in which students produce their own "Cliffs Notes" for the text. Stresses the importance of using nontraditional literature, and shows how students can discover their own richer responses to literature instead of relying on study aids. (MM)

  2. Possibilities of lasers within NOTES.

    PubMed

    Stepp, Herbert; Sroka, Ronald

    2010-10-01

    Lasers possess unique properties that render them versatile light sources particularly for NOTES. Depending on the laser light sources used, diagnostic as well as therapeutic purposes can be achieved. The diagnostic potential offered by innovative concepts such as new types of ultra-thin endoscopes and optical probes supports the physician with optical information of ultra-high resolution, tissue discrimination and manifold types of fluorescence detection. In addition, the potential 3-D capability promises enhanced recognition of tissue type and pathological status. These diagnostic techniques might enable or at least contribute to accurate and safe procedures within the spatial restrictions inherent with NOTES. The therapeutic potential ranges from induction of phototoxic effects over tissue welding, coagulation and tissue cutting to stone fragmentation. As proven in many therapeutic laser endoscopic treatment concepts, laser surgery is potentially bloodless and transmits the energy without mechanical forces. Specialized NOTES endoscopes will likely incorporate suitable probes for improving diagnostic procedures, laser fibres with advantageous light delivery possibility or innovative laser beam manipulation systems. NOTES training centres may support the propagation of the complex handling and the safety aspects for clinical use to the benefit of the patient.

  3. 49 CFR Appendix - Editorial Note:

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 16084; 28 CFR § 0.66). The Assistant Attorney General, Land and Natural Resources Division, has further.... Editorial Note: For Federal Register citations affecting appendix A to part 1, see the List of CFR Sections... determinations as to the sufficiency of titles. The Chief Counsels of the Federal Aviation...

  4. A Note on Hamiltonian Graphs

    ERIC Educational Resources Information Center

    Skurnick, Ronald; Davi, Charles; Skurnick, Mia

    2005-01-01

    Since 1952, several well-known graph theorists have proven numerous results regarding Hamiltonian graphs. In fact, many elementary graph theory textbooks contain the theorems of Ore, Bondy and Chvatal, Chvatal and Erdos, Posa, and Dirac, to name a few. In this note, the authors state and prove some propositions of their own concerning Hamiltonian…

  5. Applied Fluid Mechanics. Lecture Notes.

    ERIC Educational Resources Information Center

    Gregg, Newton D.

    This set of lecture notes is used as a supplemental text for the teaching of fluid dynamics, as one component of a thermodynamics course for engineering technologists. The major text for the course covered basic fluids concepts such as pressure, mass flow, and specific weight. The objective of this document was to present additional fluids…

  6. Forensic Analysis of a Contact Lens in a Murder Case.

    PubMed

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations. PMID:27404629

  7. Surgery to improve contact lens wear in keratoconus.

    PubMed

    Moodaley, L; Buckley, R J; Woodward, E G

    1991-04-01

    Contact lens intolerance in keratoconus may be due to the formation of a proud nebula at or near the apex of the cone that gives rise to contact lens related abrasions. These nebulae do not flatten when contact lens wear is discontinued. We describe a simple technique of superficial keratectomy to remove proud nebulae in which the resulting defect healed quickly under a therapeutic hydrogel lens. In all of the six cases described patients were able to resume contact lens wear within one month of the procedure. One case was lost to follow-up. Of the remaining five (follow-up 3-9 months), all achieved comfortable wearing times of 8 hours or more and visual acuities of 20/40 or better. One patient developed a recurrent epithelial defect that resolved on discontinuing lens wear for one week. Corneal transplantation was thus avoided. PMID:2049822

  8. Wide-converter lens design for a pico projector.

    PubMed

    Pan, Jui-Wen; Chen, Yi-Chin

    2014-12-20

    In this paper, we propose a concept for the design of a 0.702× wide-converter lens for a 0.3 in. digital micromirror device. This 0.702× wide-converter lens is capable of enlarging the size of the original projected image at the same projection distance. This 0.702× wide-converter lens is attached in front of the projection lens of a pico projector (PP). Compared with the projection lens of a PP without the 0.702× wide-converter lens, there is an increase in the size of the original projected image of 42.4% at the same projection distance. In other words, there is a saving of projection distance of 29.78% to obtain a projected image of the same size.

  9. Metamaterial-driven lens optics for new beam forming patterns

    NASA Astrophysics Data System (ADS)

    Zaghloul, Amir I.; Weiss, Steven J.

    2011-06-01

    This paper discusses the general concept of using metamaterials in microwave lenses. The different optics afforded by the inclusion of metamaterials in the lens structure produce new features such as reduced size and new beam formations. The use of negative refractive index materials is discussed in reference to the original concept of the perfect lens, leading to the Rotman lens and the Luneburg lens. In Rotman lens, negative refractions help reducing the lens size and a broadband electromagnetic band gap (EBG) surface is used to prevent reflections off the sidewalls. Verification of negative refraction and simulation of isotropic material performance are presented, as well as an example of broadening the band of an EBG surface.

  10. Lens dislocation has a possible relationship with laser iridotomy.

    PubMed

    Mutoh, Tetsuya; Barrette, Kevin F; Matsumoto, Yukihiro; Chikuda, Makoto

    2012-01-01

    We report our recent experience of four eyes with spontaneous lens dislocation in four patients with no history of trauma or any systemic disease associated with zonular dialysis. Lens dislocation developed with 0.5 to 6 months following laser iridotomy. All patients were male and two eyes were complicated with acute primary angle closure glaucoma preoperatively. Case 1 showed bilateral lens dislocation, while cases 2 and 3 involved unilateral lens dislocation. Cases 2 and 3 showed lenses completely dislocated into the vitreous cavity. All cases needed lens removal and scleral fixation of intraocular lenses. Final visual acuity was 1.2 in all cases. We suspect that laser iridotomy may induce localized zonular dialysis that results in progressive zonular weakness, leading to lens dislocation. PMID:23271880

  11. Multipoint photonic doppler velocimetry using optical lens elements

    DOEpatents

    Frogget, Brent Copely; Romero, Vincent Todd

    2014-04-29

    A probe including a fisheye lens is disclosed to measure the velocity distribution of a moving surface along many lines of sight. Laser light, directed to the surface and then reflected back from the surface, is Doppler shifted by the moving surface, collected into fisheye lens, and then directed to detection equipment through optic fibers. The received light is mixed with reference laser light and using photonic Doppler velocimetry, a continuous time record of the surface movement is obtained. An array of single-mode optical fibers provides an optic signal to an index-matching lens and eventually to a fisheye lens. The fiber array flat polished and coupled to the index-matching lens using index-matching gel. Numerous fibers in a fiber array project numerous rays through the fisheye lens which in turn project many measurement points at numerous different locations to establish surface coverage over a hemispherical shape with very little crosstalk.

  12. A passively tunable acoustic metamaterial lens for selective ultrasonic excitation

    SciTech Connect

    Zhu, H.; Semperlotti, F.

    2014-09-07

    In this paper, we present an approach to ultrasonic beam-forming and beam-steering in structures based on the concept of embedded acoustic metamaterial lenses. The lens design exploits the principle of acoustic drop-channel that enables the dynamic coupling of multiple ultrasonic waveguides at selected frequencies. In contrast with currently available technology, the embedded lens allows exploiting the host structure as a key component of the transducer system therefore enabling directional excitation by means of a single ultrasonic transducer. The design and the performance of the lens are numerically investigated by using Plane Wave Expansion and Finite Difference Time Domain techniques applied to bulk structures. Then, the design is experimentally validated on a thin aluminum plate waveguide where the lens is implemented by through-holes. The dynamic response of the embedded lens is estimated by reconstructing, via Laser Vibrometry, the velocity field induced by a single source located at the center of the lens.

  13. Position-movable lens driven by dielectric elastomer actuator

    NASA Astrophysics Data System (ADS)

    Jin, Boya; Ren, Hongwen

    2016-07-01

    A position-movable lens driven by a dielectric elastomer (DE) actuator is demonstrated. With the aid of stretching/contracting of the DE actuator, the lens can do a reciprocating motion in the direction perpendicular to its optical axis. For our DE with 1-mm thick, a voltage pulse of V=5.5 kV can cause the lens to shift ˜1.7 mm. The stretching time and contracting time of the actuator are ˜3.5 and ˜4 s, respectively. When the lens integrates with another solid lens, a variable focal length can be obtained. Although the driving voltage is relatively high, the actuator is electrically stable and the power consumption is extremely low. Our lens with movable position has potential applications in imaging, information storage, beam steering, and bifocal technology.

  14. Quantification of lens opacification with a commercially available lensometer.

    PubMed Central

    Tuft, S J; Fitzke, F W; Lawrenson, J; Silver, J; Marshall, J

    1990-01-01

    A clinical trial was undertaken to determine whether a commercially available lens opacity meter (LM701), which measures backward scattered light from the lens, provides reliable clinical information about the effect of lens opacities on visual acuity. At the 0.001 level of probability we found a significant relationship between the lens opacity meter reading and both the Snellen acuity and patient's age. For a given individual there was also a relationship between the difference in the lens opacity readings between eyes and the difference in the Snellen acuities. We could not demonstrate a relation between the lens opacity reading and either the refractive error, pupil size, or near visual acuity at this level of significance. PMID:2178680

  15. Forensic Analysis of a Contact Lens in a Murder Case.

    PubMed

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations.

  16. Notes for Serials Cataloging. Second Edition.

    ERIC Educational Resources Information Center

    Geer, Beverley, Ed.; Caraway, Beatrice L., Ed.

    Notes are indispensable to serials cataloging. Researchers, reference librarians, and catalogers regularly use notes on catalog records and, as the audience for these notes has expanded from the local library community to the global Internet community, the need for notes to be cogent, clear, and useful is greater than ever. This book is a…

  17. Lecture Notes on Multigrid Methods

    SciTech Connect

    Vassilevski, P S

    2010-06-28

    The Lecture Notes are primarily based on a sequence of lectures given by the author while been a Fulbright scholar at 'St. Kliment Ohridski' University of Sofia, Sofia, Bulgaria during the winter semester of 2009-2010 academic year. The notes are somewhat expanded version of the actual one semester class he taught there. The material covered is slightly modified and adapted version of similar topics covered in the author's monograph 'Multilevel Block-Factorization Preconditioners' published in 2008 by Springer. The author tried to keep the notes as self-contained as possible. That is why the lecture notes begin with some basic introductory matrix-vector linear algebra, numerical PDEs (finite element) facts emphasizing the relations between functions in finite dimensional spaces and their coefficient vectors and respective norms. Then, some additional facts on the implementation of finite elements based on relation tables using the popular compressed sparse row (CSR) format are given. Also, typical condition number estimates of stiffness and mass matrices, the global matrix assembly from local element matrices are given as well. Finally, some basic introductory facts about stationary iterative methods, such as Gauss-Seidel and its symmetrized version are presented. The introductory material ends up with the smoothing property of the classical iterative methods and the main definition of two-grid iterative methods. From here on, the second part of the notes begins which deals with the various aspects of the principal TG and the numerous versions of the MG cycles. At the end, in part III, we briefly introduce algebraic versions of MG referred to as AMG, focusing on classes of AMG specialized for finite element matrices.

  18. Notes: Laser Light Gets Everyone's Attention.

    ERIC Educational Resources Information Center

    Schmidt, Ellen

    1989-01-01

    Discusses laser demonstration for invoking interest in science, especially physics. Describes some examples, such as diffraction, scattering, expansion by diverging lens, internal reflection in a light pipe, and illumination through optical cable. Provides some practical hints for the demonstration. (YP)

  19. A Novel Peptide Hydrogel for an Antimicrobial Bandage Contact Lens.

    PubMed

    Gallagher, Andrew G; Alorabi, Jamal A; Wellings, Donald A; Lace, Rebecca; Horsburgh, Mal J; Williams, Rachel L

    2016-08-01

    A peptide hydrogel with an antimicrobial activity is developed as a bandage contact lens. The antimicrobial activity is enhanced with the addition of the biomolecules penicillin G or poly-ε-lysine and is positive against Staphylococcus aureus and Escherichia coli. The lens is also noncytotoxic toward a human corneal epithelial cell line and as a consequence is of great potential as a drug-eluting bandage lens replacing conventional corneal ulcer treatment. PMID:27276231

  20. OCT-based crystalline lens topography in accommodating eyes.

    PubMed

    Pérez-Merino, Pablo; Velasco-Ocana, Miriam; Martinez-Enriquez, Eduardo; Marcos, Susana

    2015-12-01

    Custom Spectral Domain Optical Coherence Tomography (SD-OCT) provided with automatic quantification and distortion correction algorithms was used to measure anterior and posterior crystalline lens surface elevation in accommodating eyes and to evaluate relationships between anterior segment surfaces. Nine young eyes were measured at different accommodative demands. Anterior and posterior lens radii of curvature decreased at a rate of 0.78 ± 0.18 and 0.13 ± 0.07 mm/D, anterior chamber depth decreased at 0.04 ± 0.01 mm/D and lens thickness increased at 0.04 ± 0.01 mm/D with accommodation. Three-dimensional surface elevations were estimated by subtracting best fitting spheres. In the relaxed state, the spherical term accounted for most of the surface irregularity in the anterior lens (47%) and astigmatism (70%) in the posterior lens. However, in accommodated lenses astigmatism was the predominant surface irregularity (90%) in the anterior lens. The RMS of high-order irregularities of the posterior lens surface was statistically significantly higher than that of the anterior lens surface (x2.02, p<0.0001). There was significant negative correlation in vertical coma (Z3 (-1)) and oblique trefoil (Z3 (-3)) between lens surfaces. The astigmatic angle showed high degree of alignment between corneal surfaces, moderate between corneal and anterior lens surface (~27 deg), but differed by ~80 deg between the anterior and posterior lens surfaces (including relative anterior/posterior lens astigmatic angle shifts (10-20 deg). PMID:26713216

  1. 2. West portal of Tunnel 22, view to the northwest, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 22, view to the northwest, 135mm lens. Note the use of concrete face and wingwalls, with dressed stone voussoirs, wingwall coping, concrete parapet with stone belt course and coping, and rubble masonry slope protection flanking the portal. Built for the Oregon Eastern, this Southern Pacific Common Standard tunnel is contemporary with those built by different contractors for the California Northeastern at the south end of the Natron Cutoff (see Tunnel 17, HAER CA-218, and Tunnel 18, HAER CA-219). - Southern Pacific Railroad Natron Cutoff, Tunnel 22, Milepost 581.85, Oakridge, Lane County, OR

  2. 2. West portal of Tunnel 23, view to the westnorthwest, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. West portal of Tunnel 23, view to the west-northwest, 135mm lens. Note the use of concrete face and wingwalls, with dressed stone voussoirs, wingwall coping, concrete parapet with stone belt course and coping, and rubble masonry slope protection flanking the portal. Built for the Oregon Eastern, this Southern Pacific Common Standard tunnel is contemporary with those built by different contractors for the California Northeastern at the south end of the Natron Cutoff (see Tunnel 17, HAER CA-218, and Tunnel 18, HAER CA-219). - Southern Pacific Railroad Natron Cutoff, Tunnel 23, Milepost 584.5, Westfir, Lane County, OR

  3. Geometry-invariant gradient refractive index lens: analytical ray tracing

    NASA Astrophysics Data System (ADS)

    Bahrami, Mehdi; Goncharov, Alexander V.

    2012-05-01

    A new class of gradient refractive index (GRIN) lens is introduced and analyzed. The interior iso-indicial contours mimic the external shape of the lens, which leads to an invariant geometry of the GRIN structure. The lens model employs a conventional surface representation using a coincoid of revolution with a higher-order aspheric term. This model has a unique feature, namely, it allows analytical paraxial ray tracing. The height and the angle of an arbitrary incident ray can be found inside the lens in a closed-form expression, which is used to calculate the main optical characteristics of the lens, including the optical power and third-order monochromatic aberration coefficients. Moreover, due to strong coupling of the external surface shape to the GRIN structure, the proposed GRIN lens is well suited for studying accommodation mechanism in the eye. To show the power of the model, several examples are given emphasizing the usefulness of the analytical solution. The presented geometry-invariant GRIN lens can be used for modeling and reconstructing the crystalline lens of the human eye and other types of eyes featuring a GRIN lens.

  4. Lens transmission measurement for an absolute radiation thermometer

    SciTech Connect

    Hao, X.; Yuan, Z.; Lu, X.

    2013-09-11

    The lens transmission for the National Institute of Metrology of China absolute radiation thermometer is measured by a hybrid method. The results of the lens transmission measurements are 99.002% and 86.792% for filter radiometers with center wavelengths 633 nm and 900 nm, respectively. These results, after correcting for diffraction factors and the size-of-source effect when the lens is incorporated within the radiometer, can be used for measurement of thermodynamic temperature. The expanded uncertainty of the lens transmission measurement system has been evaluated. It is 1.3×10{sup −3} at 633 nm and 900 nm, respectively.

  5. Optically controlled spherical liquid-crystal lens: theory and experiment

    SciTech Connect

    Gural'nik, I R; Samagin, S A

    2003-05-31

    A liquid-crystal lens with the focal distance depending on the transmitted light intensity is proposed and studied. A theoretical model is developed which adequately describes the wave-front formation by the lens. The results of visualisation of the wave-front control in a setup with crossed Polaroids and the intensity distributions, which characterise the focusing properties of the lens, are presented. To illustrate the application of the lens, an adaptive-optics system is built for stabilisation of radiation power on a 1-mm diaphragm, which reduces the power fluctuations by a factor of 30. (control of laser radiation parameters)

  6. Assessing the elasticity change of cataract lens with OCE

    NASA Astrophysics Data System (ADS)

    Wu, Chen; Liu, Chih-Hao; Raghunathan, Raksha; Singh, Manmohan; Li, Jiasong; Han, Zhaolong; Larin, Kirill V.

    2016-03-01

    Cataract is one of the most common degenerative diseases that causes blindness. Careful quantification of lens biomechanical properties can greatly assist in early detection of the disease as well as personalization of treatment procedures. In this study, we utilize a phase-sensitive optical coherence elastography (OCE) system to assess the effects of the cold cataract on the biomechanical properties of porcine crystalline lens in vitro. Relaxation rates of air puff induced elastic waves were measured on the same crystalline lens with and without cold cataract. Results demonstrate that the relaxation rate and, thus, associated elasticity of the porcine lens, increased due to the presence of cold cataract.

  7. UCLA/FNPL Underdense Plasma Lens Experiment: Results and Analysis

    SciTech Connect

    Thompson, M C; Badakov, H; Rosenzweig, J B; Travish, G; Fliller, R; Kazakevich, G M; Piot, P; Santucci, J; Li, J; Tikhoplav, R

    2006-08-04

    Focusing of a 15 MeV, 16 nC electron bunch by a gaussian underdense plasma lens operated just beyond the threshold of the underdense condition has been demonstrated. The strong 1.9 cm focal length plasma lens focused both transverse directions simultaneously and reduced the minimum area of the beam spot by a factor of 23. Analysis of the beam envelope evolution observed near the beam waist shows that the spherical aberrations of this underdense lens are lower than those of an overdense plasma lens, as predicted by theory. Time resolved measurements of the focused electron bunch are also reported and compared to simulations.

  8. Seeing lens imaging as a superposition of multiple views

    NASA Astrophysics Data System (ADS)

    Grusche, Sascha

    2016-01-01

    In the conventional approach to lens imaging, rays are used to map object points to image points. However, many students want to think of the image as a whole. To answer this need, Kepler’s ray drawing is reinterpreted in terms of shifted camera obscura images. These images are uncovered by covering the lens with pinholes. Thus, lens imaging is seen as a superposition of sharp images from different viewpoints, so-called elemental images. This superposition is simulated with projectors, and with transparencies. Lens ray diagrams are constructed based on elemental images; the conventional construction method is included as a special case.

  9. In Vivo Brillouin Analysis of the Aging Crystalline Lens

    PubMed Central

    Besner, Sebastien; Scarcelli, Giuliano; Pineda, Roberto; Yun, Seok-Hyun

    2016-01-01

    Purpose To analyze the age dependence of the longitudinal modulus of the crystalline lens in vivo using Brillouin scattering data in healthy subjects. Methods Brillouin scans were performed along the crystalline lens in 56 eyes from 30 healthy subjects aged from 19 to 63 years. Longitudinal elastic modulus was acquired along the sagittal axis of the lens with a transverse and axial resolution of 4 and 60 μm, respectively. The relative lens stiffness was computed, and correlations with age were analyzed. Results Brillouin axial profiles revealed nonuniform longitudinal modulus within the lens, increasing from a softer periphery toward a stiffer central plateau at all ages. The longitudinal modulus at the central plateau showed no age dependence in a range of 19 to 45 years and a slight decrease with age from 45 to 63 years. A significant intersubject variability was observed in an age-matched analysis. Importantly, the extent of the central stiff plateau region increased steadily over age from 19 to 63 years. The slope of change in Brillouin modulus in the peripheral regions were nearly age-invariant. Conclusions The adult human lens showed no measurable age-related increase in the peak longitudinal modulus. The expansion of the stiff central region of the lens is likely to be the major contributing factor to age-related lens stiffening. Brillouin microscopy may be useful in characterizing the crystalline lens for the optimization of surgical or pharmacological treatments aimed at restoring accommodative power. PMID:27699407

  10. Oxygen transfer in the corneal-contact lens system.

    PubMed

    Garr-Peters, J M; Ho, C S

    1987-01-01

    The clinical results of contact lens wearers indicate that materials which theoretically are adequate to prevent corneal hypoxia and edema do not perform optimally under actual wearing conditions. Optimization of the cornea-tear-lens system requires an analysis of the modes of oxygen transport, mass transfer resistances, and characteristic dimensions. The lens properties are a function of polymer composition. Thus, investigations for ideal lens materials may result in limitless test copolymers and graft polymers of siloxane, methylmethacrylate, 2-hydroxyethyl-methacrylate, vinylpyrollidone, vinylacetate, and cellulose acetate butyrate of varying degrees of cross-linking and crystallinity. In an attempt to channel research efforts, this review will state the developments to date and the desirable properties of an optimal cornea-tear-lens system. The logic should encompass a theory and model whereby parameters are identified and varied within satisfactory physiological limitations, and experiments which provide data indicative of the in vivo conditions. The parameters must reflect the inherent transport properties of the corneal-contact lens system. Contact lenses may be categorized as soft, gas-permeable rigid/hydrophobic flexible, or hard. The major differences between these three categories are the properties: equilibrium water content or degree of hydration, tendency for water pervaporation and/or dehydration, surface hydrophobicity, thermal conductivity, oxygen diffusivity and solubility, lens thickness, rest height over corneal tear, flexibility, lens mobility over the cornea, cross-linking, crystallinity, stagnant boundary layer resistances, and manufacturing processes. Aside from complications presented by lens coatings and cleansing solutions, the most common problems experienced by lens wearers include corneal edema, dehydration involving the lens and the cornea, "blurry" vision due to localized corneal anoxia, debris trapped under the lens, and deposits on

  11. Quasi-optical constrained lens amplifiers

    NASA Astrophysics Data System (ADS)

    Schoenberg, Jon S.

    1995-09-01

    A major goal in the field of quasi-optics is to increase the power available from solid state sources by combining the power of individual devices in free space, as demonstrated with grid oscillators and grid amplifiers. Grid amplifiers and most amplifier arrays require a plane wave feed, provided by a far field source or at the beam waist of a dielectric lens pair. These feed approaches add considerable loss and size, which is usually greater than the quasi-optical amplifier gain. In addition, grid amplifiers require external polarizers for stability, further increasing size and complexity. This thesis describes using constrained lens theory in the design of quasi optical amplifier arrays with a focal point feed, improving the power coupling between the feed and the amplifier for increased gain. Feed and aperture arrays of elements, input/output isolation and stability, amplifier circuitry, delay lines and bias distribution are all contained on a single planar substrate, making monolithic circuit integration possible. Measured results of X band transmission lenses and a low noise receive lens are presented, including absolute power gain up to 13 dB, noise figure as low as 1.7 dB, beam scanning to +/-30 deg, beam forming and beam switching of multiple sources, and multiple level quasi-optical power combining. The design and performance of millimeter wave power combining amplifier arrays is described, including a Ka Band hybrid array with 1 watt output power, and a V Band 36 element monolithic array with a 5 dB on/off ratio.

  12. Analysis of intermediary scan-lens and tube-lens mechanisms for optical coherence tomography.

    PubMed

    Atry, Farid; Pashaie, Ramin

    2016-02-01

    Combining an optical coherence tomography (OCT) scanner with other techniques such as optogenetic neurostimulation or fluorescence imaging requires integrating auxiliary components into the optical path of the setup. Due to the short scanning distance of most OCT objectives, adding scan and tube lenses in the device is essential to open space between the back-focal-plane of the objective and center of mass of the mirrors in the galvanometer. The effect of the scan and tube lenses on the focal spot size of the scanner using off-the-shelf components are theoretically explored for three different designs in this paper. Two lens mechanisms were implemented and tested in a custom-built OCT scanner to experimentally measure point-spread functions. Based on our analysis, proper form of a four-element semi-Plössl lens provides a superior performance compared with an achromatic doublet when used as a scan/tube lens. The former lens design provides close to diffraction-limited resolution for scan angles up to 6.4°; however, due to aberrations in an achromatic doublet, the later design offers diffraction-limited resolution confined to 2° scan angles.

  13. High Dk piggyback contact lens system for contact lens-intolerant keratoconus patients

    PubMed Central

    Sengor, Tomris; Kurna, Sevda Aydin; Aki, Suat; Özkurt, Yelda

    2011-01-01

    Background: The aim of the study was to examine the clinical success of high Dk (oxygen permeability) piggyback contact lens (PBCL) systems for the correction of contact lens intolerant keratoconus patients. Methods: Sixteen patients (29 eyes) who were not able to wear gas-permeable rigid lenses were included in this study. Hyper Dk silicone hydrogel (oxygen transmissibility or Dk/t = 150 units) and fluorosilicone methacrylate copolymer (Dk/t = 100 units) lenses were chosen as the PBCL systems. The clinical examinations included visual acuity and corneal observation by biomicroscopy, keratometer reading, and fluorescein staining before and after fitting the PBCL system. Results: Indications for using PBCL system were: lens stabilization and comfort, improving comfort, and adding protection to the cone. Visual acuities increased significantly in all of the patients compared with spectacles (P = 0). Improvement in visual acuity compared with rigid lenses alone was recorded in 89.7% of eyes and no alteration of the visual acuity was observed in 10.3% of the eyes. Wearing time of PBCL systems for most of the patients was limited time (mean 6 months, range 3–12 months); thereafter they tolerated rigid lenses alone except for 2 patients. Conclusion: The PBCL system is a safe and effective method to provide centering and corneal protection against mechanical trauma by the rigid lenses for keratoconus patients and may increase contact lens tolerance. PMID:21468342

  14. Lens and cataract: clastogenic responses in epithelial cells of the organ-cultured rat lens

    SciTech Connect

    Geard, C.R.; Worgul, B.V.

    1987-01-01

    The epithelial cells of the vertebrate lens have an unique character and a probable involvement in cataract formation, which could be initiated by exogenous stimuli. Individual rat lenses were organ-cultured, and the effects of mitomycin C and gamma rays on sister chromatid exchanges (SCE), chromosomal aberrations, and cellular kinetics assessed in cells from the epithelial monolayer. SCE showed about a 5.5-fold increase over the mitomycin C dose range (0, 17, 83, 170 nM), while chromosomal aberrations increased 38-fold. In cells from untreated lenses, SCE were 1600 times more frequent than aberrations and at a level consistent with in vivo assessments in other cell types. Gamma rays (up to 4 Gy) had a greater inhibiting effect on cellular progression, while 17 nM mitomycin C and 1 Gy induced similar clastogenic responses. This first demonstration of such changes in lens epithelial cells expands on the cell types available for monitoring potential mutagen-carcinogens. Additionally chromosomal changes resulting from lens cellular challenge could be the basis of later cytopathological changes in the lens, of which cataract is the primary concern to humans. Potential cataractogens warrant monitoring, and the study outlined may aid in this endeavor, as well as contributing to an understanding of cataract etiology.

  15. Analysis of intermediary scan-lens and tube-lens mechanisms for optical coherence tomography.

    PubMed

    Atry, Farid; Pashaie, Ramin

    2016-02-01

    Combining an optical coherence tomography (OCT) scanner with other techniques such as optogenetic neurostimulation or fluorescence imaging requires integrating auxiliary components into the optical path of the setup. Due to the short scanning distance of most OCT objectives, adding scan and tube lenses in the device is essential to open space between the back-focal-plane of the objective and center of mass of the mirrors in the galvanometer. The effect of the scan and tube lenses on the focal spot size of the scanner using off-the-shelf components are theoretically explored for three different designs in this paper. Two lens mechanisms were implemented and tested in a custom-built OCT scanner to experimentally measure point-spread functions. Based on our analysis, proper form of a four-element semi-Plössl lens provides a superior performance compared with an achromatic doublet when used as a scan/tube lens. The former lens design provides close to diffraction-limited resolution for scan angles up to 6.4°; however, due to aberrations in an achromatic doublet, the later design offers diffraction-limited resolution confined to 2° scan angles. PMID:26836064

  16. Astronomers Discover Six-Image Gravitational Lens

    NASA Astrophysics Data System (ADS)

    2001-08-01

    An international team of astronomers has used the National Science Foundation's Very Long Baseline Array (VLBA) radio telescope and NASA's Hubble Space Telescope (HST) to discover the first gravitational lens in which the single image of a very distant galaxy has been split into six different images. The unique configuration is produced by the gravitational effect of three galaxies along the line of sight between the more-distant galaxy and Earth. Optical and Radio Images of Gravitational Lens "This is the first gravitational lens with more than four images of the background object that is produced by a small group of galaxies rather than a large cluster of galaxies," said David Rusin, who just received his Ph.D. from the University of Pennsylvania. "Such systems are expected to be extremely rare, so this discovery is an important stepping stone. Because this is an intermediate case between gravitational lenses produced by single galaxies and lenses produced by large clusters of galaxies, it will give us insights we can't get from other types of lenses," Rusin added. The gravitational lens, called CLASS B1359+154, consists of a galaxy more than 11 billion light-years away in the constellation Bootes, with a trio of galaxies more than 7 billion light-years away along the same line of sight. The more-distant galaxy shows signs that it contains a massive black hole at its core and also has regions in which new stars are forming. The gravitational effect of the intervening galaxies has caused the light and radio waves from the single, more-distant galaxy to be "bent" to form six images as seen from Earth. Four of these images appear outside the triangle formed by the three intermediate galaxies and two appear inside that triangle. "This lens system is a very interesting case to study because it is more complicated than lenses produced by single galaxies, and yet simpler than lenses produced by clusters of numerous galaxies," said Chris Kochanek of the Harvard

  17. Gravitational lens determinations of cosmological parameters

    NASA Technical Reports Server (NTRS)

    Turner, Edwin L.

    1991-01-01

    Currently available attempts to determine the three classical cosmological parameters (H(0), Omega(0), and Lambda), using gravitational lens techniques and arguments are reviewed. These suggest that H(0) greater than about 75 km/s/Mpc, that contributions to Omega(0) by certain hypothetical types of dark matter are less than 1, and that Lambda is considerably smaller than 3H(0)-squared if a flat cosmological model is assumed. Unfortunately, none of these three conclusions is satisfactorily free of model dependence, possible systematic error, and caveats.

  18. Polarization response of RHIC electron lens lattices

    NASA Astrophysics Data System (ADS)

    Ranjbar, V. H.; Méot, F.; Bai, M.; Abell, D. T.; Meiser, D.

    2016-10-01

    Depolarization response for a system of two orthogonal snakes at irrational tunes is studied in depth using lattice independent spin integration. In particular we consider the effect of overlapping spin resonances in this system, to understand the impact of phase, tune, relative location and threshold strengths of the spin resonances. These results are benchmarked and compared to two dimensional direct tracking results for the RHIC e-lens lattice and the standard lattice. Finally we consider the effect of longitudinal motion via chromatic scans using direct six dimensional lattice tracking.

  19. LensTools: Weak Lensing computing tools

    NASA Astrophysics Data System (ADS)

    Petri, A.

    2016-02-01

    LensTools implements a wide range of routines frequently used in Weak Gravitational Lensing, including tools for image analysis, statistical processing and numerical theory predictions. The package offers many useful features, including complete flexibility and easy customization of input/output formats; efficient measurements of power spectrum, PDF, Minkowski functionals and peak counts of convergence maps; survey masks; artificial noise generation engines; easy to compute parameter statistical inferences; ray tracing simulations; and many others. It requires standard numpy and scipy, and depending on tools used, may require Astropy (ascl:1304.002), emcee (ascl:1303.002), matplotlib, and mpi4py.

  20. Fabrication of a fluidic membrane lens system

    NASA Astrophysics Data System (ADS)

    Draheim, J.; Schneider, F.; Kamberger, R.; Mueller, C.; Wallrabe, U.

    2009-09-01

    We present the fabrication process of a fluidic membrane lens system with an integrated piezoelectric pumping actuator. The optical unit and the pumping unit are fabricated through casting using a hot embossing machine. Two different systems, one with a homogeneous membrane thickness, and one with an inhomogeneous membrane thickness distribution, are manufactured. The influence of the volume shrinkage of the silicone during curing on the membrane shape and on the focal length is analyzed. The assembled system achieves a focal length between +52.4 mm and -70.9 mm at a piezovoltage of ±40 V. The full-scale response time of the system is below 24 ms.

  1. Kindergarten Quantum Mechanics: Lecture Notes

    SciTech Connect

    Coecke, Bob

    2006-01-04

    These lecture notes survey some joint work with Samson Abramsky as it was presented by me at several conferences in the summer of 2005. It concerns 'doing quantum mechanics using only pictures of lines, squares, triangles and diamonds'. This picture calculus can be seen as a very substantial extension of Dirac's notation, and has a purely algebraic counterpart in terms of so-called Strongly Compact Closed Categories (introduced by Abramsky and I which subsumes my Logic of Entanglement. For a survey on the 'what', the 'why' and the 'hows' I refer to a previous set of lecture notes. In a last section we provide some pointers to the body of technical literature on the subject.

  2. Shear modulus data for the human lens determined from a spinning lens test.

    PubMed

    Wilde, G S; Burd, H J; Judge, S J

    2012-04-01

    The paper describes a program of mechanical testing on donated human eye bank lenses. The principal purpose of the tests was to obtain experimental data on the shear modulus of the lens for use in future computational models of the accommodation process. Testing was conducted using a procedure in which deformations are induced in the lens by spinning it about its polar axis. Shear modulus data were inferred from these observed deformations by means of a finite element inverse analysis procedure in which the spatial variation of the shear modulus within the lens is represented by an appropriate function (see Burd et al., 2011 for a detailed specification of the design of the spinning lens test rig, experimental protocols and associated data analysis procedures that were employed in the tests). Inferred data on lens shear modulus are presented for a set of twenty-nine lenses in the age range 12 years to 58 years. The lenses were tested between 47 h and 110 h from the time of death (average post-mortem time 74 h). Care was taken to exclude any lenses that had been affected by excessive post-mortem swelling, or any lenses that had suffered mechanical damage during storage, transit or the testing process. The experimental data on shear modulus indicate that, for young lenses, the cortex is stiffer than the nucleus. The shear modulus of the nucleus and cortex both increase with increasing age. The shear modulus of the nucleus increases more rapidly than the cortex with the consequence that from an age of about 45 years onwards the nucleus is stiffer than the cortex. The principal shear modulus data presented in the paper were obtained by testing at a rotational speed of 1,000 rpm. Supplementary tests were conducted at rotational speeds of 700 rpm and 1,400 rpm. The results from these supplementary tests are in good agreement with the data obtained from the principal 1,000 rpm tests. Studies on the possible effects of lens drying during the test suggested that this factor

  3. Recognizing Exponential Growth. Classroom Notes

    ERIC Educational Resources Information Center

    Dobbs, David E.

    2004-01-01

    Two heuristic and three rigorous arguments are given for the fact that functions of the form Ce[kx], with C an arbitrary constant, are the only solutions of the equation dy/dx=ky where k is constant. Various of the proofs in this self-contained note could find classroom use in a first-year calculus course, an introductory course on differential…

  4. A note on "Kepler's equation".

    NASA Astrophysics Data System (ADS)

    Dutka, J.

    1997-07-01

    This note briefly points out the formal similarity between Kepler's equation and equations developed in Hindu and Islamic astronomy for describing the lunar parallax. Specifically, an iterative method for calculating the lunar parallax has been developed by the astronomer Habash al-Hasib al-Marwazi (about 850 A.D., Turkestan), which is surprisingly similar to the iterative method for solving Kepler's equation invented by Leonhard Euler (1707 - 1783).

  5. Training in LESS and NOTES.

    PubMed

    Liang, Xiao; Yang, Bo; Yinghao, Sun; Huiqin, Wang; Zhi, Cao; Chuanliang, Xu; Linhui, Wang

    2012-04-01

    LESS and NOTES are the further step forward the "scarless" surgery recently, which have challenged the main principles of conventional multiport laparoscopy. To develop the surgical skills for these novel techniques, the guideline for training program should be neccesary for its clinical practice to reduce the complications. In this paper, we will summary the challenges of these new technique and introduce our experience of training courses.

  6. Fusarium and Candida albicans biofilms on soft contact lenses: model development, influence of lens type and susceptibility to lens care solutions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fungal keratitis is commonly caused by Fusarium species, while cases of Candida-associated keratitis are less frequent. Recent outbreaks of Fusarium keratitis were associated with contact lens wear and with MoistureLoc contact lens care solution, and biofilm formation on contact lens/lens cases was...

  7. Candidate Gravitational Microlensing Events for Future Direct Lens Imaging

    NASA Astrophysics Data System (ADS)

    Henderson, C. B.; Park, H.; Sumi, T.; Udalski, A.; Gould, A.; Tsapras, Y.; Han, C.; Gaudi, B. S.; Bozza, V.; Abe, F.; Bennett, D. P.; Bond, I. A.; Botzler, C. S.; Freeman, M.; Fukui, A.; Fukunaga, D.; Itow, Y.; Koshimoto, N.; Ling, C. H.; Masuda, K.; Matsubara, Y.; Muraki, Y.; Namba, S.; Ohnishi, K.; Rattenbury, N. J.; Saito, To; Sullivan, D. J.; Suzuki, D.; Sweatman, W. L.; Tristram, P. J.; Tsurumi, N.; Wada, K.; Yamai, N.; Yock, P. C. M.; Yonehara, A.; MOA Collaboration; Szymański, M. K.; Kubiak, M.; Pietrzyński, G.; Soszyński, I.; Skowron, J.; Kozłowski, S.; Poleski, R.; Ulaczyk, K.; Wyrzykowski, Ł.; Pietrukowicz, P.; OGLE Collaboration; Almeida, L. A.; Bos, M.; Choi, J.-Y.; Christie, G. W.; Depoy, D. L.; Dong, S.; Friedmann, M.; Hwang, K.-H.; Jablonski, F.; Jung, Y. K.; Kaspi, S.; Lee, C.-U.; Maoz, D.; McCormick, J.; Moorhouse, D.; Natusch, T.; Ngan, H.; Pogge, R. W.; Shin, I.-G.; Shvartzvald, Y.; Tan, T.-G.; Thornley, G.; Yee, J. C.; μFUN Collaboration; Allan, A.; Bramich, D. M.; Browne, P.; Dominik, M.; Horne, K.; Hundertmark, M.; Figuera Jaimes, R.; Kains, N.; Snodgrass, C.; Steele, I. A.; Street, R. A.; RoboNet Collaboration

    2014-10-01

    The mass of the lenses giving rise to Galactic microlensing events can be constrained by measuring the relative lens-source proper motion and lens flux. The flux of the lens can be separated from that of the source, companions to the source, and unrelated nearby stars with high-resolution images taken when the lens and source are spatially resolved. For typical ground-based adaptive optics (AO) or space-based observations, this requires either inordinately long time baselines or high relative proper motions. We provide a list of microlensing events toward the Galactic bulge with high relative lens-source proper motion that are therefore good candidates for constraining the lens mass with future high-resolution imaging. We investigate all events from 2004 to 2013 that display detectable finite-source effects, a feature that allows us to measure the proper motion. In total, we present 20 events with μ >~ 8 mas yr-1. Of these, 14 were culled from previous analyses while 6 are new, including OGLE-2004-BLG-368, MOA-2005-BLG-36, OGLE-2012-BLG-0211, OGLE-2012-BLG-0456, MOA-2012-BLG-532, and MOA-2013-BLG-029. In lsim12 yr from the time of each event the lens and source of each event will be sufficiently separated for ground-based telescopes with AO systems or space telescopes to resolve each component and further characterize the lens system. Furthermore, for the most recent events, comparison of the lens flux estimates from images taken immediately to those estimated from images taken when the lens and source are resolved can be used to empirically check the robustness of the single-epoch method currently being used to estimate lens masses for many events.

  8. The concentration of light in the human lens.

    PubMed Central

    Merriam, J C

    1996-01-01

    PURPOSE: This thesis explores the idea that light energy, especially ultraviolet light, contributes to the unequal distribution of cataract around the world and to the development of cortical opacities. METHODS: In the first section, the thesis reviews historical concepts of the function of the lens and the nature of cataract, epidemiologic data on the global distribution of cataract, and clinical observations of the predominant location of cortical opacification. Second, computer ray tracings and geometric optics demonstrate the passage of light of varying angle of incidence within the lens. Third, two models of the human eye are used to study the refraction of light by the cornea and lens and illustrate the concentration of energy at the equatorial plane of the lens. RESULTS: Cataract prevalence increases with proximity to the earth's equator, and cortical cataract is most common in the inferior and inferonasal lens. Theoretical studies and the eye models both demonstrate that the concentration of light within the lens increases with angle of incidence, and the eye models suggest that the inferior and inferonasal lens receives significantly more energy than other sections of the lens. CONCLUSION: The prevalence of cataract and exposure to ultraviolet energy both increase with decreasing latitude. The most common location of cortical cataract in the inferonasal lens is consistent with the greater dose of light energy received by this portion of the lens. These studies suggest that the global distribution of cataract and the development of cortical cataract are at least in part dependent on the dose of ultraviolet light received by the lens. Images FIGURE 1 FIGURE 2 FIGURE 27 FIGURE 28 FIGURE 29 FIGURE 31 FIGURE 32 FIGURE 33 FIGURE 34 FIGURE 36 FIGURE 37 FIGURE 38 FIGURE 50 FIGURE 51 FIGURE 52 FIGURE 53 FIGURE 54 FIGURE 56 FIGURE 60 FIGURE 61 FIGURE 63 FIGURE 64 FIGURE 65 FIGURE 68 FIGURE 69 FIGURE 70 FIGURE 71 PMID:8981716

  9. Tubular astigmatism-tunable fluidic lens.

    PubMed

    Kopp, Daniel; Zappe, Hans

    2016-06-15

    We demonstrate a new means to fabricate three-dimensional liquid lenses which may be tuned in focal length and astigmatism. Using actuation by electrowetting-on-dielectrics, astigmatism in arbitrary directions may be tuned independently, with almost no cross talk between orthogonal orientations. The lens is based on electrodes structured on planar polyimide foils and subsequently rolled, enabling high-resolution patterning of complex electrodes along the azimuthal and radial directions of the lens. Based on a design established through fluidic and optical simulations, the astigmatism tuning is experimentally verified by a change of the corresponding Zernike coefficients measured using a Shack-Hartmann wavefront sensor. It was seen that the back focal length can be tuned by 5 mm and 0° and 45° astigmatism by 3 μm through application of voltages in the range of 50  Vrms. It was observed that the cross talk with other aberrations is very low, suggesting a novel means for astigmatism control in imaging systems.

  10. NIRCam pupil imaging lens actuator assembly

    NASA Astrophysics Data System (ADS)

    Clark, Charles S.

    2009-08-01

    The near infrared camera (NIRCam) is one of four science instruments installed on the integrated science instrument module (ISIM) of NASA's James Webb Space Telescope (JWST) which is intended to conduct scientific observations over a five-year mission lifetime. NIRCam's requirements include operation at 37 Kelvin to produce high-resolution images in two-wave bands encompassing the range from 0.6 to 5 microns. The NIRCam instrument is also required to provide a means of imaging the primary mirror for ground testing, instrument commissioning, and diagnostics which have resulted in the development of the pupil imaging lens actuator assembly. This paper discusses the development of the pupil imaging lens (PIL) assembly, including the driving requirements for the PIL assembly, and how the design supports these conditions. Some of the design features included in the PIL assembly are the titanium isothermal optical flexure mounts with multi-axis alignment flexures, a counterbalanced direct drive rotary actuator, and a fail-safe retraction system with magnetic stowage stop. The paper also discusses how the PIL assembly was successfully tested to the demanding requirements typical for cryogenic instruments.

  11. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    USGS Publications Warehouse

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Wilson, Reg G.; Goetz, Walter

    2012-01-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ?5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ?2.1 cm to infinity. At the minimum working distance, image pixel scale is ?14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI?s resolution is comparable at ?30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  12. Lens-fed multiple beam arrays

    NASA Astrophysics Data System (ADS)

    Archer, D. H.

    1984-09-01

    The lens-fed type of phased array, wherein an entire set of contiguous beams is formed simultaneously, with each beam processing the full gain of the projected array aperture, is described. In this type of phased array, true time delay is used in the beam formation, so the beam-pointing directions in space remain invariant with frequency. Lens-fed multiple beam arrays provide continuous spatial surveillance with high antenna gain and good angular resolution, which makes them attractive for ESM receive applications. When these arrays are not used for ECM transmit applications, relatively low power amplifiers are placed in each of the array element feed lines. Such a distributed amplifier array can be sized to generate any desired level of effective radiated power from a few kilowatts to tens of megawatts. These radiated power levels are available at 100 percent duty cycle over operating bandwidths of 3:1 and can be controlled by direct optimized ECM techniques discretely at multiple threat emitters.

  13. Crystal diffraction lens for medical imaging

    SciTech Connect

    Smither, R. K.; Roa, D. E.

    2000-02-25

    A crystal diffraction lens for focusing energetic gamma rays has been developed at Argonne National Laboratory for use in medical imaging of radioactivity in the human body. A common method for locating possible cancerous growths in the body is to inject radioactivity into the blood stream of the patient and then look for any concentration of radioactivity that could be associated with the fast growing cancer cells. Often there are borderline indications of possible cancers that could be due to statistical functions in the measured counting rates. In order to determine if these indications are false or real, one must resort to surgical means and take tissue samples in the suspect area. They are developing a system of crystal diffraction lenses that will be incorporated into a 3-D imaging system with better sensitivity (factors of 10 to 100) and better spatial resolution (a few mm in both vertical and horizontal directions) than most systems presently in use. The use of this new imaging system will allow one to eliminate 90% of the false indications and both locate and determine the size of the cancer with mm precision. The lens consists of 900 single crystals of copper, 4 mm x 4 mm on a side and 2--4 mm thick, mounted in 13 concentric rings.

  14. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    NASA Astrophysics Data System (ADS)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Willson, Reg G.; Goetz, Walter

    2012-09-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ˜5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ˜2.1 cm to infinity. At the minimum working distance, image pixel scale is ˜14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI's resolution is comparable at ˜30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  15. Unilateral phacoemulsification and intraocular lens implantation in a dachshund

    PubMed Central

    Kopala, Robyn L.

    2008-01-01

    A 1.5-year-old, spayed, female dachshund was presented with a cataract and lens-induced uveitis in the left eye. The cataract progressed from immature to hypermature in 4 months. Phacoemulsification and intraocular lens implantation was performed and the dog remains visual in the left eye 1 year post-surgery. PMID:19119375

  16. 21 CFR 800.10 - Contact lens solutions; sterility.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... for ophthalmic use that are regulated as medical devices, i.e., contact lens solutions. By the... not sterile. These articles, which are regulated as medical devices unless packaged with the...

  17. 21 CFR 800.10 - Contact lens solutions; sterility.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... for ophthalmic use that are regulated as medical devices, i.e., contact lens solutions. By the... not sterile. These articles, which are regulated as medical devices unless packaged with the...

  18. The "Youth Lens": Analyzing Adolescence/ts in Literary Texts

    ERIC Educational Resources Information Center

    Petrone, Robert; Sarigianides, Sophia Tatiana; Lewis, Mark A.

    2014-01-01

    Drawing from interdisciplinary scholarship that re-conceptualizes adolescence as a cultural construct, this article introduces a "Youth Lens." A "Youth Lens" comprises an approach to textual analysis that examines how ideas about adolescence and youth get formed, circulated, critiqued, and revised. Focused specifically on its…

  19. Fermat's least-time principle and the embedded transparent lens

    NASA Astrophysics Data System (ADS)

    Kantowski, R.; Chen, B.; Dai, X.

    2013-10-01

    We present a simplified version of the lowest-order embedded point mass gravitational lens theory and then make the extension of this theory to any embedded transparent lens. Embedding a lens effectively reduces the gravitational potential’s range, i.e., partially shields the lensing potential because the lens mass is made a contributor to the mean mass density of the Universe and not simply superimposed upon it. We give the time-delay function for the embedded point mass lens from which we can derive the simplified lens equation by applying Fermat’s least-time principle. Even though rigorous derivations are only made for the point mass in a flat background, the generalization of the lens equation to lowest order for any distributed lens in any homogeneous background is obvious. We find from this simplified theory that embedding can introduce corrections above the few percent level in weak lensing shears caused by large clusters but only at large impacts. The potential part of the time delay is also affected in strong lensing at the few percent level. Additionally we again confirm that the presence of a cosmological constant alters the gravitational deflection of passing photons.

  20. Hestian Hermeneutics: A Lens of Analysis for Home Economics.

    ERIC Educational Resources Information Center

    Thompson, Patricia J.

    Feminist and women scholars in all disciplines have challenged the traditional masculist "lens of analysis" and have sought to bring into focus the "missing text" of female experience. This paper proposes an alternative to gender-bound lens of analysis because either or both masculist and feminist lenses are too limited to focus adequately on the…

  1. Tune-Shift Compensation Using the Tevatron Electron Lens

    SciTech Connect

    Kip Bishofberger et al.

    2003-08-20

    The Tevatron Electron Lens was originally designed to alleviate the tune shift and spread induced in Tevatron antiproton bunches from interactions with the proton bunches. We report recent developments and successful results of such tune-shift compensation. Lifetime measurements are central to our data and the basis of our analysis. Future goals and possible uses for the lens are also discussed.

  2. Contact lens correction for an aphakic patient with megalocornea.

    PubMed

    Saffra, Norman; Rakhamimov, Aleksandr; Masini, Robert; Rappaport, Stuart

    2014-08-01

    A 55-year old pseudophakic man with megalocornea presented with a progressive monocular diplopia. On examination the patient was found to have subluxation of the posterior chamber intraocular lens (IOL)/capsular-bag-complex. Surgical removal of the complex was performed resulting in aphakic status. The patient was subsequently fitted with a custom contact lens for aphakia, with successful visual rehabilitation. PMID:24656547

  3. 21 CFR 886.1385 - Polymethylmethacrylate (PMMA) diagnostic contact lens.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Polymethylmethacrylate (PMMA) diagnostic contact lens. (a) Identification. A polymethylmethacrylate (PMMA) diagnostic contact lens is a device that is a curved shell of PMMA intended to be applied for a short period of time... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Polymethylmethacrylate (PMMA) diagnostic...

  4. 21 CFR 886.1385 - Polymethylmethacrylate (PMMA) diagnostic contact lens.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Polymethylmethacrylate (PMMA) diagnostic contact lens. (a) Identification. A polymethylmethacrylate (PMMA) diagnostic contact lens is a device that is a curved shell of PMMA intended to be applied for a short period of time... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Polymethylmethacrylate (PMMA) diagnostic...

  5. Opaque Contact Lens For Tracking Motion Of Eye

    NASA Technical Reports Server (NTRS)

    Zografos, James L., II; Gibson, Charles R.

    1993-01-01

    Opaque contact lens facilitates measurements of movements of eye; particularly, torsional movements. Lens, marked with pair of indices at diameter of 0.5 mm, provides stable, high-contrast reference for measurements of angular position and velocity of eye by use of video-image-analysis techniques. Intended for use in experiments on response of eye to vestibular balance mechanism.

  6. Modified Matching Ronchi Test to Visualize Lens Aberrations

    ERIC Educational Resources Information Center

    Hassani, Kh; Ziafi, H. Hooshmand

    2011-01-01

    We introduce a modification to the matching Ronchi test to visualize lens aberrations with simple and inexpensive equipment available in educational optics labs. This method can help instructors and students to observe and estimate lens aberrations in real time. It is also a semi-quantitative tool for primary tests in research labs. In this work…

  7. The analysis of optical wave beams propagation in lens systems

    NASA Astrophysics Data System (ADS)

    Kazakov, I.; Mosentsov, S.; Moskaletz, O.

    2016-08-01

    In this paper some aspects of the formation and propagation of optical wave beams in lens systems were considered. As an example, the two-lens optical information processing system was considered. Analysis of the two-lens optical circuit has been made with a systems approach perspective. As part of the radio-optical analogies had been applied certain provisions of the theory of dynamical systems to the spatial optical system. The lens system is represented as a simple series-connected optical elements with known spatial impulse response. General impulse response of such a system has been received, as well as consider some special cases of the impulse response. The question of the relationship between the parameters and the size of the input aperture lenses for undistorted transmission of the optical signal has been considered. Analysis of the energy loss resulting from the finite aperture of the lens. It's based on an assessment of the fraction of radiation that propagates beyond the lens. Analysis showed that the energy losses depend explicitly on the following parameters: radiation wavelength, distance between input aperture and lens, and ratio of the input aperture and lens aperture. With the computer help simulation the dependence of losses was shown on the above parameters

  8. Astronomers Discover Six-Image Gravitational Lens

    NASA Astrophysics Data System (ADS)

    2001-08-01

    An international team of astronomers has used the National Science Foundation's Very Long Baseline Array (VLBA) radio telescope and NASA's Hubble Space Telescope (HST) to discover the first gravitational lens in which the single image of a very distant galaxy has been split into six different images. The unique configuration is produced by the gravitational effect of three galaxies along the line of sight between the more-distant galaxy and Earth. Optical and Radio Images of Gravitational Lens "This is the first gravitational lens with more than four images of the background object that is produced by a small group of galaxies rather than a large cluster of galaxies," said David Rusin, who just received his Ph.D. from the University of Pennsylvania. "Such systems are expected to be extremely rare, so this discovery is an important stepping stone. Because this is an intermediate case between gravitational lenses produced by single galaxies and lenses produced by large clusters of galaxies, it will give us insights we can't get from other types of lenses," Rusin added. The gravitational lens, called CLASS B1359+154, consists of a galaxy more than 11 billion light-years away in the constellation Bootes, with a trio of galaxies more than 7 billion light-years away along the same line of sight. The more-distant galaxy shows signs that it contains a massive black hole at its core and also has regions in which new stars are forming. The gravitational effect of the intervening galaxies has caused the light and radio waves from the single, more-distant galaxy to be "bent" to form six images as seen from Earth. Four of these images appear outside the triangle formed by the three intermediate galaxies and two appear inside that triangle. "This lens system is a very interesting case to study because it is more complicated than lenses produced by single galaxies, and yet simpler than lenses produced by clusters of numerous galaxies," said Chris Kochanek of the Harvard

  9. Dielectrically embedded flat mesh lens for millimeter waves applications.

    PubMed

    Pisano, Giampaolo; Ng, Ming Wah; Ozturk, Fahri; Maffei, Bruno; Haynes, Vic

    2013-04-10

    A flat lens based on subwavelength periodic metal meshes has been developed using photolithographic techniques. These mesh grids are stacked at specific distances and embedded in polypropylene. A code was developed to optimize more than 1000 transmission line circuits required to vary the device phase shift across the lens flat surface, mimicking the behavior of a classical lens. A W-band mesh-lens prototype was successfully manufactured and its RF performance characterized using a vector network analyzer coupled to corrugated horn antennas. Co-polarization far-field beam patterns were measured and compared with finite-element method models. The excellent agreement between data and simulations validated our designing tools and manufacturing procedures. This mesh lens is a low-loss, robust, light, and compact device that has many potential applications including millimeter wave quasi-optical systems for future cosmic microwave background polarization instruments.

  10. Gabor lens focusing of a negative ion beam

    SciTech Connect

    Palkovic, J.A.; Mills, F.E.; Schmidt, C.; Young, D.E.

    1989-05-01

    Gabor or plasma lenses have previously been used to focus intense beams of positive ions at energies from 10 keV to 5 MeV. It is the large electrostatic field of the non-neutral plasma in the Gabor lens which is responsible for the focusing. Focusing an ion beam with a given sign of charge in a Gabor lens requires a non-neutral plasma with the opposite sign of charge as the beam. A Gabor lens constructed at Fermilab has been used to focus a 30 keV proton beam with good optical quality. We discuss studies of the action of a Gabor lens on a beam of negative ions. A Gabor lens has been considered for matching an H/sup /minus// beam into an RFQ in the redesign of the low energy section of the Fermilab linac. 9 refs., 3 figs., 1 tab.

  11. An electrostatically and a magnetically confined electron gun lens system

    NASA Technical Reports Server (NTRS)

    Bernius, Mark T.; Man, Kin F.; Chutjian, Ara

    1988-01-01

    Focal properties, electron trajectory calculations, and geometries are given for two electron 'gun' lens systems that have a variety of applications in, for example, electron-neutral and electron-ion scattering experiments. One nine-lens system utilizes only electrostatic confinement and is capable of focusing electrons onto a fixed target with extremely small divergence angles, over a range of final energies 1-790 eV. The second gun lens system is a simpler three-lens system suitable for use in a uniform, solenoidal magnetic field. While the focusing properties of such a magnetically confined lens systenm are simpler to deal with, the system does illustrate features of electron extraction and Brillouin flow that have not been suitably emphasized in the literature.

  12. Lens hexokinase deactivation by near-UV irradiation.

    PubMed

    Tung, W H; Chylack, L T; Andley, U P

    1988-03-01

    Photodamage to lens hexokinase has been investigated by exposing the lenses of rat, rabbit and calf eyes to 300 nm irradiation. Hexokinase activity was diminished by 15.9% +/- 5.4 and 23.4% +/- 5.0 upon irradiation of the isolated rat lens for 1 and 2 hours respectively. Irradiation of the whole eye for 2 hours resulted in hexokinase deactivation of 13.6% +/- 5.8 and 19.2% +/- 6.2 for rat and rabbit lens homogenates and 55% +/- 7 for calf lens capsule plus epithelium. Enzyme deactivation was prevented when the isolated lens was irradiated with the vitreous attached. Glucose, catalase or ascorbate added to the medium prior to irradiation, each had a protective effect on hexokinase deactivation. The results are consistent with a mechanism in which photochemical generation of active species of oxygen, via the photosensitizing action of tryptophan photoproducts, plays a significant role in enzyme deactivation. PMID:3359812

  13. Spherical Aberration Corrections for the Electrostatic Gridded Lens

    SciTech Connect

    Pikin,A.

    2008-05-01

    Two methods of spherical aberration corrections of an electrostatic gridded lens have been studied with ray tracing simulations. Both methods are based on modifying electrostatic field on the periphery of the lens. In a simplest case such modification is done by extending the part of the grid support on its radial periphery in axial direction. In alternative method the electric field on the radial periphery of the lens is modified by applying an optimum voltage on an electrically isolated correcting electrode. It was demonstrated, that for a given focal length the voltage on this lens can be optimized for minimum aberration The performance of lenses is presented as a lens contribution to the beam RMS normalized emittance.

  14. Multifunctional metasurface lens for imaging and Fourier transform

    NASA Astrophysics Data System (ADS)

    Wen, Dandan; Yue, Fuyong; Ardron, Marcus; Chen, Xianzhong

    2016-06-01

    A metasurface can manipulate light in a desirable manner by imparting local and space-variant abrupt phase change. Benefiting from such an unprecedented capability, the conventional concept of what constitutes an optical lens continues to evolve. Ultrathin optical metasurface lenses have been demonstrated based on various nanoantennas such as V-shape structures, nanorods and nanoslits. A single device that can integrate two different types of lenses and polarities is desirable for system integration and device miniaturization. We experimentally demonstrate such an ultrathin metasurface lens that can function either as a spherical lens or a cylindrical lens, depending on the helicity of the incident light. Helicity-controllable focal line and focal point in the real focal plane, as well as imaging and 1D/2D Fourier transforms, are observed on the same lens. Our work provides a unique tool for polarization imaging, image processing and particle trapping.

  15. Multifunctional metasurface lens for imaging and Fourier transform.

    PubMed

    Wen, Dandan; Yue, Fuyong; Ardron, Marcus; Chen, Xianzhong

    2016-01-01

    A metasurface can manipulate light in a desirable manner by imparting local and space-variant abrupt phase change. Benefiting from such an unprecedented capability, the conventional concept of what constitutes an optical lens continues to evolve. Ultrathin optical metasurface lenses have been demonstrated based on various nanoantennas such as V-shape structures, nanorods and nanoslits. A single device that can integrate two different types of lenses and polarities is desirable for system integration and device miniaturization. We experimentally demonstrate such an ultrathin metasurface lens that can function either as a spherical lens or a cylindrical lens, depending on the helicity of the incident light. Helicity-controllable focal line and focal point in the real focal plane, as well as imaging and 1D/2D Fourier transforms, are observed on the same lens. Our work provides a unique tool for polarization imaging, image processing and particle trapping. PMID:27272601

  16. Cellulose based soft gel like actuator for reconfigurable lens array

    NASA Astrophysics Data System (ADS)

    Sadasivuni, Kishor Kumar; Yadav, Mithilesh; Gao, Xiaoyuan; Mun, Seongcheol; Kim, Jaehwan

    2014-04-01

    Reconfigurable lens is biomimetic as it mimics human eye and is a transparent actuating material that can change its curvature in the presence of external stimuli. Focus tunable, adaptive lenses provide several advantages over traditional lens assemblies in terms of compactness, cost, efficiency and flexibility. To further improve the simplicity and compact nature of adaptive lenses, we present lens system which makes use of an inline, transparent electro active polymer actuator. This paper reports the preliminary development we have achieved in reconfigurable lens systems made with cellulose nanocrystals (CNC) using the principle of Kerr effect. Preparation of the hydrophobic CNC solution as well as the optical properties of the lens has been discussed. This soft gel actuator was analyzed by measuring the electric birefringence in the pulse field of constant and sinusoidal voltage based on the use of modulation of elliptic light polarization.

  17. Thermal deformation impacts on SOG Fresnel lens performance

    NASA Astrophysics Data System (ADS)

    Büyükcoşkun, Murat; Annen, Hans Philipp; González Muñoz, Luis Felipe

    2012-10-01

    Silicone-on-Glass (SOG) Fresnel lenses are flat optical elements used in concentrator photovoltaics (CPV). SOG lens production process broadly involves forming optical silicone prisms attached to glass. Silicone is first compressed onto glass while heat is applied in order to shorten its curing time. During the cooling process, however, difference between thermal expansion coefficient for silicon and glass causes thermal deformation of prisms which results in compromised optical efficiency. In this study, thermal-induced deformation of SOG Fresnel lens prisms is analyzed by Surface Profile Measurement (SPM) and Finite Element Analysis (FEA) methods. In order to better observe patterns of thermal deformation and overall lens performance, lens samples were subjected to an optical efficiency test. Focus quality (FQ) images were also taken and observed in order to further analyze thermally affected lens performance. The study is expected to contribute to knowledge on temperature induced performance determinants of SOG Fresnel lenses.

  18. Design of ophthalmic lens by using optimized aspheric surface coefficients

    NASA Astrophysics Data System (ADS)

    Chang, Ming-Wen; Sun, Wen-Shing; Tien, Chuen-Lin

    1998-09-01

    Coddington's equations can be used to eliminate the oblique astigmatic error in the design of ophthalmic lens of spherical or other conicoidal surfaces. But it is difficult to get satisfactory result in the designing of the nonconic aspheric ophthalmic lens. In this paper we present an efficient approach based on optimization of aspheric coefficients, which enables the design program to obtain the minimum aberrations. Many higher order coefficients of aspheric surfaces can easily result in inflection point, which increases the difficulty in manufacturing. We solved the problem by taking it as one of the optimization constraints. The design of nonconic aspheric ophthalmic lens could also make the spectacle lenses well thinner in thickness and well flatter in shape than the design of spherical ophthalmic lens and other conicoidal ophthalmic lens. Damped least square methods are used in our design. Aspherical myopia ophthalmic lenses, aspherical hypermetropic lenses and cataract lenses were designed. Comparisons of design examples' results are given.

  19. Multifunctional metasurface lens for imaging and Fourier transform

    PubMed Central

    Wen, Dandan; Yue, Fuyong; Ardron, Marcus; Chen, Xianzhong

    2016-01-01

    A metasurface can manipulate light in a desirable manner by imparting local and space-variant abrupt phase change. Benefiting from such an unprecedented capability, the conventional concept of what constitutes an optical lens continues to evolve. Ultrathin optical metasurface lenses have been demonstrated based on various nanoantennas such as V-shape structures, nanorods and nanoslits. A single device that can integrate two different types of lenses and polarities is desirable for system integration and device miniaturization. We experimentally demonstrate such an ultrathin metasurface lens that can function either as a spherical lens or a cylindrical lens, depending on the helicity of the incident light. Helicity-controllable focal line and focal point in the real focal plane, as well as imaging and 1D/2D Fourier transforms, are observed on the same lens. Our work provides a unique tool for polarization imaging, image processing and particle trapping. PMID:27272601

  20. Reaction of tyrosine oxidation products with proteins of the lens

    PubMed Central

    Pirie, Antoinette

    1968-01-01

    Oxidation of tyrosine in the presence of bovine lens proteins leads to the formation of brown or black melanoproteins. Both tyrosinase and the oxidizing system of ferrous sulphate–ascorbic acid–EDTA are effective. The fluorescence of the lens proteins is both altered and enhanced by the tyrosine-oxidizing systems. Their fluorescence spectra resemble those of urea-insoluble proteins of human cataractous lens and of 1,2-naphthaquinone–proteins of naphthalene cataract. The lens proteins lose their thiol groups and, in acid hydrolysates of treated β-and γ-crystallins, a substance has been detected chromatographically that behaves similarly to a compound formed when 3,4-dihydroxyphenylalanine (dopa) is oxidized by tyrosinase in the presence of cysteine. Analysis and behaviour of this substance from hydrolysates of lens proteins suggest that it is a compound of cysteine and dopa. PMID:4971287

  1. Lecture notes for criticality safety

    SciTech Connect

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  2. Lecture notes for criticality safety

    SciTech Connect

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein`s mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  3. Growth of the eye lens: II. Allometric studies

    PubMed Central

    2014-01-01

    Purpose The purpose of this study was to examine the ontogeny and phylogeny of lens growth in a variety of species using allometry. Methods Data on the accumulation of wet and/or dry lens weight as a function of bodyweight were obtained for 40 species and subjected to allometric analysis to examine ontogenic growth and compaction. Allometric analysis was also used to compare the maximum adult lens weights for 147 species with the maximum adult bodyweight and to compare lens volumes calculated from wet and dry weights with eye volumes calculated from axial length. Results Linear allometric relationships were obtained for the comparison of ontogenic lens and bodyweight accumulation. The body mass exponent (BME) decreased with increasing animal size from around 1.0 in small rodents to 0.4 in large ungulates for both wet and dry weights. Compaction constants for the ontogenic growth ranged from 1.00 in birds and reptiles up to 1.30 in mammals. Allometric comparison of maximum lens wet and dry weights with maximum bodyweights also yielded linear plots with a BME of 0.504 for all warm blooded species except primates which had a BME of 0.25. When lens volumes were compared with eye volumes, all species yielded a scaling constant of 0.75 but the proportionality constants for primates and birds were lower. Conclusions Ontogenic lens growth is fastest, relative to body growth, in small animals and slowest in large animals. Fiber cell compaction takes place throughout life in most species, but not in birds and reptiles. Maximum adult lens size scales with eye size with the same exponent in all species, but birds and primates have smaller lenses relative to eye size than other species. Optical properties of the lens are generated through the combination of variations in the rate of growth, rate of compaction, shape and size. PMID:24715759

  4. Cytokine changes in tears and relationship to contact lens discomfort

    PubMed Central

    Zhao, Zhenjun; Naduvilath, Thomas; Lazon de la Jara, Percy

    2015-01-01

    Purpose To determine the reproducibility of a multiplex bead assay for measuring cytokines in tears and correlations between ocular discomfort with or without contact lens wear and the concentration of cytokines in tears. Methods Ninety participants (divided into two groups) were enrolled in this prospective study. They were asked to rate their ocular comfort and collect their tears in the morning and just before sleep for 10 days with or without contact lenses. The participants collected their tears using a glass microcapillary tube for both stages. Galyfilcon A lenses were worn on a daily disposable basis during the contact lens stage, and comfort scores and tears were collected before lens insertion and prior to lens removal at the end of the day. Tears were analyzed for cytokine concentrations using a 27-plex multibead assay. Correlations were sought between cytokine concentrations and comfort. Results There was a significant (p<0.022) decrease in ocular comfort over the day with or without lens wear. The magnitude of ocular discomfort was significantly greater (p<0.009) with lens wear. The concentrations of 12 cytokines differed significantly between the groups; thus, these cytokines were not analyzed further. For the remaining 15 cytokines, interleukin-8 (IL-8) was the only cytokine that changed in both groups during the day without (reduced by >-0.5 Log pg/ml, p<0.001) or with lens wear (reduced by >-0.2 Log pg/ml, p<0.001). The change in the vascular endothelial growth factor (VEGF) concentration only in tears was correlated to ocular comfort, but this was not changed by contact lens wear. Conclusions Ocular comfort during the day is magnified by contact lens wear. However, the increase in the change in comfort during lens wear was not associated with changes in 15 cytokines in the tear film. PMID:25814827

  5. Note on new KLT relations

    NASA Astrophysics Data System (ADS)

    Feng, Bo; He, Song; Huang, Rijun; Jia, Yin

    2010-10-01

    In this short note, we present two results about KLT relations discussed in recent several papers. Our first result is the re-derivation of Mason-Skinner MHV amplitude by applying the S n-3 permutation symmetric KLT relations directly to MHV amplitude. Our second result is the equivalence proof of the newly discovered S n-2 permutation symmetric KLT relations and the well-known S n-3 permutation symmetric KLT relations. Although both formulas have been shown to be correct by BCFW recursion relations, our result is the first direct check using the regularized definition of the new formula.

  6. Cosmic Lens Reveals Distant Galactic Violence

    NASA Astrophysics Data System (ADS)

    2008-10-01

    By cleverly unraveling the workings of a natural cosmic lens, astronomers have gained a rare glimpse of the violent assembly of a young galaxy in the early Universe. Their new picture suggests that the galaxy has collided with another, feeding a supermassive black hole and triggering a tremendous burst of star formation. Gravitational Lens Diagram Imaging a Distant Galaxy Using a Gravitational Lens CREDIT: Bill Saxton, NRAO/AUI/NSF Click on image for details and more graphics. The astronomers used the National Science Foundation's Very Large Array (VLA) radio telescope to look at a galaxy more than 12 billion light-years from Earth, seen as it was when the Universe was only about 15 percent of its current age. Between this galaxy and Earth lies another distant galaxy, so perfectly aligned along the line of sight that its gravity bends the light and radio waves from the farther object into a circle, or "Einstein Ring." This gravitational lens made it possible for the scientists to learn details of the young, distant galaxy that would have been unobtainable otherwise. "Nature provided us with a magnifying glass to peer into the workings of a nascent galaxy, providing an exciting look at the violent, messy process of building galaxies in the early history of the Universe," said Dominik Riechers, who led this project at the Max Planck Institute for Astronomy in Germany and now is a Hubble Fellow at the California Institute of Technology (Caltech). The new picture of the distant galaxy, dubbed PSS J2322+1944, shows a massive reservoir of gas, 16,000 light-years in diameter, that contains the raw material for building new stars. A supermassive black hole is voraciously eating material, and new stars are being born at the rate of nearly 700 Suns per year. By comparison, our Milky Way Galaxy produces the equivalent of about 3-4 Suns per year. The black hole appears to be near the edge, rather than at the center, of the giant gas reservoir, indicating, the astronomers say

  7. Design and analysis of an adaptive lens that mimics the performance of the crystalline lens in the human eye

    NASA Astrophysics Data System (ADS)

    Santiago-Alvarado, Agustin; Cruz-Félix, Angel S.; Iturbide-Jiménez, F.; Martínez-López, M.; Ramírez-Como, M.; Armengol-Cruz, V.; Vásquez-Báez, I.

    2014-09-01

    Tunable lenses are optical systems that have attracted much attention due to their potential applications in such areas like ophthalmology, machine vision, microscopy and laser processing. In recent years we have been working in the analysis and performance of a liquid-filled variable focal length lens, this is a lens that can modify its focal length by changing the amount of water within it. Nowadays we extend our study to a particular adaptive lens known as solid elastic lens (SEL) that it is formed by an elastic main body made of Polydimethylsiloxane (PDMS Sylgard 184). In this work, we present the design, simulation and analysis of an adaptive solid elastic lens that in principle imitates the accommodation process of the crystalline lens in the human eye. For this work, we have adopted the parameters of the schematic eye model developed in 1985 by Navarro et al.; this model represents the anatomy of the eye as close as possible to reality by predicting an acceptable and accurate quantity of spherical and chromatic aberrations without any shape fitting. An opto-mechanical analysis of the accommodation process of the adaptive lens is presented, by simulating a certain amount of radial force applied onto the SEL using the finite element method with the commercial software SolidWorks®. We also present ray-trace diagrams of the simulated compression process of the adaptive lens using the commercial software OSLO®.

  8. Adjustable Focus Optical Correction Lens (AFOCL)

    NASA Technical Reports Server (NTRS)

    Peters, Bruce R.

    2001-01-01

    This report describes the activities and accomplishments along with the status of the characterization of a PLZT-based Adjustable Focus Optical Correction Lens (AFOCL) test device. The activities described in this report were undertaken by members of the Center for Applied Optics (CAO) at the University of Alabama in Huntsville (UAH) under NASA Contract NAS8-00188. The effort was led by Dr. Bruce Peters as the Principal Investigator and supported by Dr. Patrick Reardon, Ms. Deborah Bailey, and graduate student Mr. Jeremy Wong. The activities outlined for the first year of the contract were to identify vendors and procure a test device along with performing the initial optical characterization of the test device. This activity has been successfully executed and test results are available and preliminary information was published at the SPIE Photonics West Conference in San Jose, January 2001. The paper, "Preliminary investigation of an active PLZT lens," was well received and generated response with several questions from the audience. A PLZT test device has been commercially procured from an outside vendor: The University of California in San Diego (UCSD) in partnership with New Interconnect Packaging Technologies (NIPT) Inc. The device has been subjected to several tests to characterize the optical performance of the device at wavelengths of interest. The goal was to evaluate the AFOCL similar to a conventional lens and measure any optical aberrations present due to the PLZT material as a deviation in the size of the diffraction limited spot (blur), the presence of diffracted energy into higher orders surrounding the focused spot (a variation in Strehl), and/or a variation or spread in the location of the focused energy away from the optical axis (a bias towards optical wedge, spherical, comma, or other higher order aberrations). While data has been collected indicative of the imaging quality of the AFOCL test device, it was not possible to fully characterize the

  9. Promoting Knowledge Transfer with Electronic Note Taking

    ERIC Educational Resources Information Center

    Katayama, Andrew D.; Shambaugh, R. Neal; Doctor, Tasneem

    2005-01-01

    We investigated the differences between (a) copying and pasting text versus typed note-taking methods of constructing study notes simultaneously with (b) vertically scaffolded versus horizontally scaffold notes on knowledge transfer. Forty-seven undergraduate educational psychology students participated. Materials included 2 electronic…

  10. What Predicts Skill in Lecture Note Taking?

    ERIC Educational Resources Information Center

    Peverly, Stephen T.; Ramaswamy, Vivek; Brown, Cindy; Sumowski, James; Alidoost, Moona; Garner, Joanna

    2007-01-01

    Despite the importance of good lecture notes to test performance, very little is known about the cognitive processes that underlie effective lecture note taking. The primary purpose of the 2 studies reported (a pilot study and Study 1) was to investigate 3 processes hypothesized to be significantly related to quality of notes: transcription…

  11. 31 CFR Appendixes to Chapter V - Note

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Note Appendixes to Chapter V Money... CONTROL, DEPARTMENT OF THE TREASURY Ch. V, Nt. Appendixes to Chapter V—Note Notes: The alphabetical lists... blocked vessel in the underlying transaction. See § 501.604(b)(1) of this chapter. Financial...

  12. LENS: web-based lens for enrichment and network studies of human proteins

    PubMed Central

    2015-01-01

    Background Network analysis is a common approach for the study of genetic view of diseases and biological pathways. Typically, when a set of genes are identified to be of interest in relation to a disease, say through a genome wide association study (GWAS) or a different gene expression study, these genes are typically analyzed in the context of their protein-protein interaction (PPI) networks. Further analysis is carried out to compute the enrichment of known pathways and disease-associations in the network. Having tools for such analysis at the fingertips of biologists without the requirement for computer programming or curation of data would accelerate the characterization of genes of interest. Currently available tools do not integrate network and enrichment analysis and their visualizations, and most of them present results in formats not most conducive to human cognition. Results We developed the tool Lens for Enrichment and Network Studies of human proteins (LENS) that performs network and pathway and diseases enrichment analyses on genes of interest to users. The tool creates a visualization of the network, provides easy to read statistics on network connectivity, and displays Venn diagrams with statistical significance values of the network's association with drugs, diseases, pathways, and GWASs. We used the tool to analyze gene sets related to craniofacial development, autism, and schizophrenia. Conclusion LENS is a web-based tool that does not require and download or plugins to use. The tool is free and does not require login for use, and is available at http://severus.dbmi.pitt.edu/LENS. PMID:26680011

  13. Shaping light with split lens configurations

    NASA Astrophysics Data System (ADS)

    Lizana, A.; Vargas, A.; Turpin, A.; Ramirez, C.; Estevez, I.; Campos, J.

    2016-10-01

    We present an intuitive and versatile method that can dynamically generate 2D and 3D tailored light patterns. The light structures are generated by dynamically implementing discrete and continuous split lens configurations onto a spatial light modulator. These configurations can be dynamically modified by tuning a reduced number of control parameters with simple physical interpretation. We demonstrate the versatility of the method by experimentally implementing a wide number of structured beams, including optical lattices, a light cone, and vortex beams carrying orbital angular momentum. Compared with other optical illuminators, the advantages of our method are its simple interpretation and control for creating the light structures, and that it is based on a robust, dynamic and easy-to-build optical set-up. The proposed method may be useful in a large number of applications, such as optical trapping, super-resolution imaging or illuminating arrays of photonic switching devices.

  14. Intraocular lens employed for cataract surgery

    NASA Astrophysics Data System (ADS)

    Roszkowska, A. M.; Torrisi, L.

    2014-04-01

    The aim of this paper is to illustrate the techniques of cataract surgery with implantation of intraocular lenses and some physical properties of the used materials. The new technology, coupled with extensive experience and the studied cases, permits to increase the standardization and accuracy of the engravings, by reducing the use and handling of surgical instruments inside the eye. At present it is possible to replace the cataract with crystalline lenses based on biopolymers such as PMMA, silicone, acrylic hydrophilic and hydrophobic acrylic. These materials are increasingly able to replace the natural lens and to ensure the fully functional of the eye. The role of femtosecond lasers in cataract surgery, to assist or replace several aspects of the manual cataract surgery, are discussed.

  15. Meibomian gland dysfunction and contact lens intolerance.

    PubMed

    Korb, D R; Henriquez, A S

    1980-03-01

    A study of a syndrome characterized by deficient or inadequate Meibomian gland secretions, minimal or transient symptoms suggestive of ocular dryness, fluorescein staining of the cornea (often detected only after delayed observation or sequential instillation of stain), and contact lens intolerance is described. Clinical and cytologic studies indicate that the syndrome is due to obstruction of the Meibomian gland orifices by desquamated epithelial cells that tend to aggregate in keratotic clusters, which results in alteration of the Meibomian glands' contribution to the precorneal tear film. Further complication may result from bacterial proliferation in the desquamated keratotic cells and the release of the bacteria and their toxic products into the precorneal tear film from these reservoirs in the excretory pathways of the Meibomian glands.

  16. Scleral lens for keratoconus: technology update

    PubMed Central

    Rathi, Varsha M; Mandathara, Preeji S; Taneja, Mukesh; Dumpati, Srikanth; Sangwan, Virender S

    2015-01-01

    Scleral lenses are large diameter lenses which rest over the sclera, unlike the conventional contact lenses which rest on the cornea. These lenses are fitted to not touch the cornea and there is a space created between the cornea and the lens. These lenses are inserted in the eyes after filling with sterile isotonic fluid. Generally, scleral contact lenses are used for high irregular astigmatism as seen in various corneal ectatic diseases such as keratoconus, pellucid marginal degeneration, or/and as liquid bandage in ocular surface disorders. In this article, we review the new developments, that have taken place over the years, in the field of scleral contact lenses as regard to new designs, materials, manufacturing technologies, and fitting strategies particularly for keratoconus. PMID:26604671

  17. Achromatic Metasurface Lens at Telecommunication Wavelengths.

    PubMed

    Khorasaninejad, Mohammadreza; Aieta, Francesco; Kanhaiya, Pritpal; Kats, Mikhail A; Genevet, Patrice; Rousso, David; Capasso, Federico

    2015-08-12

    Nanoscale optical resonators enable a new class of flat optical components called metasurfaces. This approach has been used to demonstrate functionalities such as focusing free of monochromatic aberrations (i.e., spherical and coma), anomalous reflection, and large circular dichroism. Recently, dielectric metasurfaces that compensate the phase dispersion responsible for chromatic aberrations have been demonstrated. Here, we utilize an aperiodic array of coupled dielectric nanoresonators to demonstrate a multiwavelength achromatic lens. The focal length remains unchanged for three wavelengths in the near-infrared region (1300, 1550, and 1800 nm). Experimental results are in agreement with full-wave simulations. Our findings are an essential step toward a realization of broadband flat optical elements.

  18. Large scale water lens for solar concentration.

    PubMed

    Mondol, A S; Vogel, B; Bastian, G

    2015-06-01

    Properties of large scale water lenses for solar concentration were investigated. These lenses were built from readily available materials, normal tap water and hyper-elastic linear low density polyethylene foil. Exposed to sunlight, the focal lengths and light intensities in the focal spot were measured and calculated. Their optical properties were modeled with a raytracing software based on the lens shape. We have achieved a good match of experimental and theoretical data by considering wavelength dependent concentration factor, absorption and focal length. The change in light concentration as a function of water volume was examined via the resulting load on the foil and the corresponding change of shape. The latter was extracted from images and modeled by a finite element simulation. PMID:26072893

  19. Adding a lens Improves spinning speed characterization.

    PubMed

    Mihaliuk, Eugene; Gullion, Terry

    2015-11-01

    Highly stable sample rotation is important in many solid-state NMR experiments. Whether the necessary stability is achieved is not always clear. Typically only an average frequency over some time interval (often relatively long and unknown) is available from the spinning speed controller readout, which is not representative of the short-term variations of instantaneous rotation frequency. The necessity of the relatively slow measurement of spinning speed is a consequence of phase noise in the tachometer, which prevents speed measurement to be both rapid and precise at the same time. We show that adding a lens to the tachometer, without any other changes in the probe, reduces phase noise by nearly an order of magnitude and allows improved measurement of the spinning speed.

  20. Low energy lamps and eye lens autofluorescence.

    PubMed

    Walsh, Glyn; Pearce, E Ian

    2010-10-01

    Tungsten filament lamps are rapidly being displaced from the market-place by compact fluorescent lamps. Although the colour temperature and total luminous output of a fluorescent lamp may be similar to that of an incandescent lamp, the output spectrum is very different. The peaks of the mercury vapour spectrum at 365.4nm (UV) and at 435.8nm (blue) are close to the peak fluorescence excitation wavelengths in the human lens, and it has been shown that such fluorescence can lower sensitivity to low contrast objects. This effect could also explain the reported preference for brown, red and yellow tinted lenses often reported by elderly patients, as these coincidentally block the ultraviolet and blue exciting wavelengths.

  1. Prototype color field sequential television lens assembly

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The design, development, and evaluation of a prototype modular lens assembly with a self-contained field sequential color wheel is presented. The design of a color wheel of maximum efficiency, the selection of spectral filters, and the design of a quiet, efficient wheel drive system are included. Design tradeoffs considered for each aspect of the modular assembly are discussed. Emphasis is placed on achieving a design which can be attached directly to an unmodified camera, thus permitting use of the assembly in evaluating various candidate camera and sensor designs. A technique is described which permits maintaining high optical efficiency with an unmodified camera. A motor synchronization system is developed which requires only the vertical synchronization signal as a reference frequency input. Equations and tradeoff curves are developed to permit optimizing the filter wheel aperture shapes for a variety of different design conditions.

  2. Large scale water lens for solar concentration.

    PubMed

    Mondol, A S; Vogel, B; Bastian, G

    2015-06-01

    Properties of large scale water lenses for solar concentration were investigated. These lenses were built from readily available materials, normal tap water and hyper-elastic linear low density polyethylene foil. Exposed to sunlight, the focal lengths and light intensities in the focal spot were measured and calculated. Their optical properties were modeled with a raytracing software based on the lens shape. We have achieved a good match of experimental and theoretical data by considering wavelength dependent concentration factor, absorption and focal length. The change in light concentration as a function of water volume was examined via the resulting load on the foil and the corresponding change of shape. The latter was extracted from images and modeled by a finite element simulation.

  3. High gradient lens for charged particle beam

    SciTech Connect

    Chen, Yu-Jiuan

    2014-04-29

    Methods and devices enable shaping of a charged particle beam. A dynamically adjustable electric lens includes a series of alternating a series of alternating layers of insulators and conductors with a hollow center. The series of alternating layers when stacked together form a high gradient insulator (HGI) tube to allow propagation of the charged particle beam through the hollow center of the HGI tube. A plurality of transmission lines are connected to a plurality of sections of the HGI tube, and one or more voltage sources are provided to supply an adjustable voltage value to each transmission line of the plurality of transmission lines. By changing the voltage values supplied to each section of the HGI tube, any desired electric field can be established across the HGI tube. This way various functionalities including focusing, defocusing, acceleration, deceleration, intensity modulation and others can be effectuated on a time varying basis.

  4. Spectral analysis and comparison of mineral deposits forming in opacified intraocular lens and senile cataractous lens

    NASA Astrophysics Data System (ADS)

    Lin, Shan-Yang; Chen, Ko-Hwa; Lin, Chih-Cheng; Cheng, Wen-Ting; Li, Mei-Jane

    2010-10-01

    This preliminary report was attempted to compare the chemical components of mineral deposits on the surfaces of an opacified intraocular lens (IOL) and a calcified senile cataractous lens (SCL) by vibrational spectral diagnosis. An opacified intraocular lens (IOL) was obtained from a 65-year-old male patient who had a significant decrease in visual acuity 2-years after an ocular IOL implantation. Another SCL with grayish white calcified plaque on the subcapsular cortex was isolated from a 79-year-old male patient with complicated cataract after cataract surgery. Optical light microscope was used to observe both samples and gross pictures were taken. Fourier transform infrared (FT-IR) and Raman microspectroscopic techniques were employed to analyze the calcified deposits. The curve-fitting algorithm using the Gaussian function was also used to quantitatively estimate the chemical components in each deposit. The preliminary results of spectral diagnosis indicate that the opacified IOL mainly consisted of the poorly crystalline, immature non-stoichiometric hydroxyapatite (HA) with higher content of type B carbonated apatites. However, the calcified plaque deposited on the SCL was comprised of a mature crystalline stoichiometric HA having higher contents of type A and type B carbonate apatites. More case studies should be examined in future.

  5. Solar lens mission concept for interstellar exploration

    NASA Astrophysics Data System (ADS)

    Brashears, Travis; Lubin, Philip; Turyshev, Slava; Shao, Michael; Zhang, Qicheng

    2015-09-01

    The long standing approach to space travel has been to incorporate massive on-board electronics, probes and propellants to achieve space exploration. This approach has led to many great achievements in science, but will never help to explore the interstellar medium. Fortunately, a paradigm shift is upon us in how a spacecraft is constructed and propelled. This paper describes a mission concept to get to our Sun's Gravity Lens at 550AU in less than 10 years. It will be done by using DE-STAR, a scalable solar-powered phased-array laser in Earth Orbit, as a directed energy photon drive of low-mass wafersats. [1] [2] [3] [4] [5] With recent technologies a complete mission can be placed on a wafer including, power from an embedded radio nuclear thermal generator (RTG), PV, laser communications, imaging, photon thrusters for attitude control and other sensors. As one example, a futuristic 200 MW laser array consisting of 1 - 10 kw meter scale sub elements with a 100m baseline can propel a 10 gram wafer scale spacecraft with a 3m laser sail to 60AU/Year. Directed energy propulsion of low-mass spacecraft gives us an opportunity to capture images of Alpha Centauri and its planets, detailed imaging of the cosmic microwave background, set up interstellar communications by using gravity lenses around nearby stars to boost signals from interstellar probes, and much more. This system offers a very large range of missions allowing hundreds of wafer scale payload launches per day to reach this cosmological data reservoir. Directed Energy Propulsion is the only current technology that can provide a near-term path to utilize our Sun's Gravity Lens.

  6. Progress in thermal neutron radiography at LENS

    NASA Astrophysics Data System (ADS)

    Jenkins, Jack; Low Energy Neutron Source (LENS) at Indiana University Collaboration

    2014-09-01

    An end station for thermal neutron radiography and tomography is in operation at the Indiana University LENS facility. Neutrons from proton-induced nuclear reactions in Beryllium are moderated and collimated into a beam which is attenuated by a scanned object on a remotely-controlled rotating table. Neutron signal is then converted to a light signal with a ZnS scintillating screen and recorded in a cooled CCD. The author has performed diagnostics on the radiography hardware and software and has tested the system's capabilities by imaging a stack of high density polyethylene cubes with diverse inlet holes and grooves on an 80/20 aluminum base. The resolution of the radiographs are seen to be less than 1mm and 3D rending software is capable of reconstructing the internal structure of the aluminum. An end station for thermal neutron radiography and tomography is in operation at the Indiana University LENS facility. Neutrons from proton-induced nuclear reactions in Beryllium are moderated and collimated into a beam which is attenuated by a scanned object on a remotely-controlled rotating table. Neutron signal is then converted to a light signal with a ZnS scintillating screen and recorded in a cooled CCD. The author has performed diagnostics on the radiography hardware and software and has tested the system's capabilities by imaging a stack of high density polyethylene cubes with diverse inlet holes and grooves on an 80/20 aluminum base. The resolution of the radiographs are seen to be less than 1mm and 3D rending software is capable of reconstructing the internal structure of the aluminum. NSF.

  7. Early clinical experience with a new preloaded one-piece intraocular lens in paediatric cataract surgery.

    PubMed

    Gosling, D B; Chan, T K J

    2016-09-01

    PurposeTo report the clinical experience of using the Tecnis PCB00 (Abbott Medical Optics, Santa Ana, CA, USA) preloaded one-piece intraocular lens (IOL) in the setting of a tertiary referral centre for paediatric cataract.MethodsA retrospective case note review of all paediatric cataract surgeries using the Tecnis PCB00 IOL, at a single UK paediatric ophthalmology department.ResultsNine eyes in seven patients received the IOL between December 2014 and January 2016. All patients underwent lens aspiration and insertion of the IOL 'in the bag.' The indications for surgery included developmental cataract (8/9) and traumatic cataract (1/9). Mean age at the time of surgery was 7 years (range 2-14). The median improvement in logMAR best-corrected visual acuity was 0.475 (range 0.250-1.500). The mean follow-up duration was 5 months (range 1-13). No operative or post-operative complications occurred as a result of using the device.ConclusionThe Tecnis PCB00 preloaded IOL appears to be a safe and effective device in treating paediatric cataract.

  8. Effect of rigid gas permeable lens flexure on vision.

    PubMed

    Sorbara, L; Fonn, D; MacNeill, K

    1992-12-01

    The flexure of spherical rigid lenses (various materials) and a soft lens was measured using automated over-keratometry on 6 adapted rigid lens wearers (12 eyes) whose corneal toricity ranged from 1.37 to 3.87 D. The results showed: (1) that there was no significant difference in flexure between polymethyl methacrylate (PMMA), silicone acrylate, and the fluorosilicone acrylate lenses (whose Dks ranged from 0 to 115). However, Advent (fluoropolymer) did flex significantly more than the other rigid lenses, and significantly less than the soft lens (Bausch & Lomb U4) and (2) that lens flexure of the rigid lenses did not alter over a 2-h period. We also measured high and low contrast visual acuity (HCVA and LCVA), and the results from subjects wearing Advent and the soft lens were significantly worse than with the other rigid lenses. Finally, the results of this study showed no correlation between rigid lens flexure and permeability and between rigid lens flexure and visual acuity when Advent was excluded from the linear regression analysis.

  9. The membrane proteome of the mouse lens fiber cell

    PubMed Central

    Wilmarth, Phillip A.; David, Larry L.

    2009-01-01

    Purpose Fiber cells of the ocular lens are bounded by a highly specialized plasma membrane. Despite the pivotal role that membrane proteins play in the physiology and pathophysiology of the lens, our knowledge of the structure and composition of the fiber cell plasma membrane remains fragmentary. In the current study, we utilized mass spectrometry-based shotgun proteomics to provide a comprehensive survey of the mouse lens fiber cell membrane proteome. Methods Membranes were purified from young mouse lenses and subjected to MudPIT (Multidimensional protein identification technology) analysis. The resulting proteomic data were analyzed further by reference to publically available microarray databases. Results More than 200 membrane proteins were identified by MudPIT, including Type I, Type II, Type III (multi-pass), lipid-anchored, and GPI-anchored membrane proteins, in addition to membrane-associated cytoskeletal elements and extracellular matrix components. The membrane proteins of highest apparent abundance included Mip, Lim2, and the lens-specific connexin proteins Gja3, Gja8, and Gje1. Significantly, many proteins previously unsuspected in the lens were also detected, including proteins with roles in cell adhesion, solute transport, and cell signaling. Conclusions The MudPIT technique constitutes a powerful technique for the analysis of the lens membrane proteome and provides valuable insights into the composition of the lens fiber cell unit membrane. PMID:19956408

  10. Challenges of using dielectric elastomer actuators to tune liquid lens

    NASA Astrophysics Data System (ADS)

    Keong, Gih-Keong; La, Thanh-Giang; Shiau, Li-Lynn; Tan, Adrian W. Y.

    2014-03-01

    Recently, dielectric elastomer actuators (DEAs) have been adopted to tune liquid membrane lens, just like ciliary muscles do to the lens in human eye. However, it faces some challenges, such as high stress, membrane puncture, high driving voltage requirement, and limited focus distance (not more than 707cm), that limit its practical use. The design problem gets more complex as the liquid lens shares the same elastomeric membrane as the DEA. To address these challenges, we separate DEA from the lens membrane. Instead, a liquid-immersed DEA, which is safe from terminal failure, is used as a diaphragm pump to inflate or deflate the liquid lens by hydraulic pressure. This opens up the possibility that the DEA can be thinned down and stacked up to reduce the driving voltage, independent of the lens membrane thickness. Preliminary study showed that our 8-mm-diameter tunable lens can focus objects in the range of 15cm to 50cm with a small driving voltage of 1.8kV. Further miniaturization of DEA could achieve a driving voltage less than 1kV.

  11. Variable-focal lens using electroactive polymer actuator

    NASA Astrophysics Data System (ADS)

    Vunder, V.; Punning, A.; Aabloo, A.

    2011-03-01

    The paper describes a simple and cost-effective design and fabrication process of a liquid-filled variable-focal lens. The lens was made of soft polymer material, its shape and curvature can be controlled by hydraulic pressure. An electroactive polymer is used as an actuator. A carbon-polymer composite (CPC) was used. The device is composed of elastic membrane upon a circular lens chamber, a reservoir of liquid, and a channel between them. It was made of three layers of polydimethylsiloxane (PDMS), bonded using the partial curing technique. The channels and reservoir were filled with incompressible liquid after curing process. A CPC actuator was mechanically attached to reservoir to compress or decompress the liquid. Squeezing the liquid between the reservoir and the lens chamber will push the membrane inward or outward resulting in the change of the shape of the lens and alteration of its focal length. Depending on the pressure the lens can be plano-convex or plano-concave or even switch between the two configurations. With only a few minor modifications it is possible to fabricate bi-convex and bi-concave lenses. The lens with a 1 mm diameter and the focal length from infinity to 17 mm is reported. The 5x15mm CPC actuator with the working voltage of only up to +/-2.5 V was capable to alter the focal length within the full range of the focal length in 10 seconds.

  12. Thermal considerations on the design and operation of lens ducts

    NASA Astrophysics Data System (ADS)

    Golnabi, H.

    2003-09-01

    In this paper, heat effects due to powerful pump beam in the lens duct delivery system is investigated and subsequent thermal effects are described. Temperature raise in the device, thermal loading, and material considerations for the lens ducts fabrication are reported. For an absorbed intensity of 10 W/cm2 in a 4 cm-long lens duct, the temperature difference between the midpoint and its faces, for a lens duct made from borosilicate is 7.05°C, for sapphire 4.01°C, and for synthetic fused silica is the smallest value of 0.54°C. For a typical absorbed intensity of 1.4 W/cm2 in a 4 cm-long lens duct, with a steady-state time constant of 120 s, the fractional thermal loading is 1.98% for BK-7, 1.89% for sapphire, and only 0.16% for synthetic fused silica. By considering different glass materials, the overall results show that synthetic fused silica is superior to some other materials for the fabrication of a lens duct. The reported analytical method and the results of parametric studies can be helpful in material selection and construction of an effective lens duct.

  13. Finite Element Analysis of the LOLA Receiver Telescope Lens

    NASA Technical Reports Server (NTRS)

    Matzinger, Elizabeth

    2007-01-01

    This paper presents the finite element stress and distortion analysis completed on the Receiver Telescope lens of the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. The Receiver Telescope captures the laser pulses transmitted through a diffractive optical element (DOE) and reflected off the lunar surface. The largest lens of the Receiver Telescope, Lens 1, is a 150 mm diameter aspheric lens originally designed to be made of BK7 glass. The finite element model of the Receiver Telescope Lens 1 is comprised of solid elements and constrained in a manner consistent with the behavior of the mounting configuration of the Receiver Telescope tube. Twenty-one temperature load cases were mapped to the nodes based on thermal analysis completed by LOLA's lead thermal analyst, and loads were applied to simulate the preload applied from the ring flexure. The thermal environment of the baseline design (uncoated BK7 lens with no baffle) produces large radial and axial gradients in the lens. These large gradients create internal stresses that may lead to part failure, as well as significant bending that degrades optical performance. The high stresses and large distortions shown in the analysis precipitated a design change from BK7 glass to sapphire.

  14. Reverse pupillary block associated with pigment dispersion syndrome after in-the-bag intraocular lens implantation.

    PubMed

    Itagaki, Hideo; Kunikata, Toshio; Hiratsuka, Kentaro; Saito, Junichiro; Oshika, Tetsuro

    2013-12-01

    A 61-year-old man with high myopia who had received a systemic α1A-adrenoceptor antagonist had phacoemulsification and in-the-bag intraocular lens implantation in the right eye. One day postoperatively, marked pigment dispersion in the anterior chamber, posterior bowing of the iris, and iridodonesis were noted associated with a subsequent elevation in intraocular pressure (IOP). Pharmacological pupil dilation was effective in reducing pigment dispersion and IOP, and laser peripheral iridotomy was performed to alleviate posterior bowing of the iris. We hypothesize that dynamic changes in the aqueous humor flow by cataract surgery and latent flaccidity of the iris due to the systemic α1A-adrenoceptor antagonist caused reverse pupillary block. High myopia may be another risk factor for this complication. PMID:24140374

  15. Development of dielectric elastomer driven micro-optical zoom lens system

    NASA Astrophysics Data System (ADS)

    Kim, Hyunseok; Park, Jongkil; Chuc, Nguyen Huu; Choi, H. R.; Nam, J. D.; Lee, Y.; Jung, H. S.; Koo, J. C.

    2007-04-01

    Normally, various micro-scale devices adopt electromechanical actuators for their basic mechanical functions. Those types of actuators require a complicated power transfer system even for generating a tiny scale motion. Since the mechanical power transfer system for the micro-scale motion may require many components, the system design to fit those components into a small space is always challenging. Micro-optical zoom lens systems are recently popularly used for many portable IT devices such as digital cameras, camcorder, and cell phones, Noting the advantages of EAP actuators over the conventional electromechanical counterparts in terms of simple actuator mechanisms, a micro-optic device that is driven with the EAP actuator is introduced in the present work. EAP material selection, device design and fabrication will be also delineated.

  16. Mass spectrometry-based proteomic analyses of contact lens deposition

    PubMed Central

    Green-Church, Kari B.

    2008-01-01

    Purpose The purpose of this report is to describe the contact lens deposition proteome associated with two silicone hydrogel contact lenses and care solutions using a mass spectrometric-based approach. Methods This was a randomized, controlled, examiner-masked crossover clinical trial that included 48 participants. Lenses and no-rub care solutions evaluated included galyfilcon A (Acuvue Advance, Vistakon Inc., Jacksonville, FL), lotrafilcon B (O2 Optix, CIBA Vision Inc., Duluth, GA), AQuify (CIBA Vision Inc.), and ReNu MoistureLoc (Bausch and Lomb Inc., Rochester, NY). After two weeks of daily wear in each lens-solution combination, the left lens was removed by the examiner (using gloves and forceps) and placed in a protein precipitation buffer (acetone). The precipitate was quantitated for total protein concentration (per lens), and proteins were then identified using liquid chromatography tandem mass spectrometry (nano-LC-MS/MS) and peptide sequencing. Results Between 7.32 and 9.76 µg/lens of protein was observed on average from each lens-solution combination. There were 19 total unique proteins identified across the two lens materials, and six proteins were identified in all four lens-solution combinations including lipocalin, lysozyme, lacritin, lactoferrin, proline rich 4, and Ig Alpha. Lotrafilcon B was associated with 15 individual proteins (across both care solutions), and 53% of these proteins were observed in at least 50% of the analyses. Galyfilcon A was associated with 13 individual proteins, and 38.5% of these proteins were observed in at least 50% of the analyses. There were three unique proteins identified from galyfilcon A and four unique proteins identified from lotrafilcon B. Conclusions The total amount of proteins identified from silicone hydrogel materials is much less than the amount from traditional soft lens materials. For the most part, the deposition proteome across these lenses is similar, although the different polymer characteristics

  17. Critical Assessment of Correction Methods for Fisheye Lens Distortion

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Tian, C.; Huang, Y.

    2016-06-01

    A fisheye lens is widely used to create a wide panoramic or hemispherical image. It is an ultra wide-angle lens that produces strong visual distortion. The distortion modeling and estimation of the fisheye lens are the crucial step for fisheye lens calibration and image rectification in computer vision and close-range photography. There are two kinds of distortion: radial and tangential distortion. Radial distortion is large for fisheye imaging and critical for the subsequent image processing. Although many researchers have developed calibration algorithms of radial distortion of fisheye lens, quantitative evaluation of the correction performance has remained a challenge. This is the first paper that intuitively and objectively evaluates the performance of five different calibration algorithms. Upto- date research on fisheye lens calibration is comprehensively reviewed to identify the research need. To differentiate their performance in terms of precision and ease-using, five methods are then tested using a diverse set of actual images of the checkerboard that are taken at Wuhan University, China under varying lighting conditions, shadows, and shooting angles. The method of rational function model, which was generally used for wide-angle lens correction, outperforms the other methods. However, the one parameter division model is easy for practical use without compromising too much the precision. The reason is that it depends on the linear structure in the image and requires no preceding calibration. It is a tradeoff between correction precision and ease-using. By critically assessing the strengths and limitations of the existing algorithms, the paper provides valuable insight and guideline for future practice and algorithm development that are important for fisheye lens calibration. It is promising for the optimal design of lens correction models that are suitable for the millions of portable imaging devices.

  18. Optical power of the isolated human crystalline lens

    PubMed Central

    Borja, David; Manns, Fabrice; Ho, Arthur; Ziebarth, Noel; Rosen, Alexandre M.; Jain, Rakhi; Amelinckx, Adriana; Arrieta, Esdras; Augusteyn, Robert C.; Parel, Jean-Marie

    2009-01-01

    Purpose To characterize the age-dependence of isolated human crystalline lens power and quantify the contributions of the lens surfaces and refractive index gradient. Methods Experiments were performed on a total of 100 eyes from 73 donors (average post-mortem: 2.8±1.6 days) with an age range of 6 to 94 years. Lens power was measured with a modified commercial lensmeter or with an optical system based on the Scheiner principle. The radius of curvature and asphericity of the isolated lens surfaces were measured by shadowphotography. For each lens the contributions of the surfaces and the refractive index gradient to the measured lens power were calculated using an optical ray tracing software. The age dependency of these refractive powers was assessed. Results The total refractive power and surface refractive power both showed a biphasic age dependency. The total power decreased at a rate of −0.41D/year between age 6 and 58.1, and increased at a rate of 0.33D/year between age 58.1 and 82. The surface contribution decreased at a rate of −0.13D/year between age 6 and 55.2, and increased at a rate of 0.04D/year between age 55.2 and 94. The relative contribution of the surfaces increased by 0.17%/year. The equivalent refractive index also showed a biphasic age dependency with a decrease at a rate of −3.9×10−4/year from age 6 to 60.4 followed by a plateau. Conclusions The lens power decreases with age due mainly to a decrease in the contribution of the gradient. The use of a constant equivalent refractive index value to calculate lens power using the lens maker formula will underestimate the power of young lenses and overestimate the power of older lenses. PMID:18316704

  19. Comparation of effectiveness of silicone hydrogel contact lens and hydrogel contact lens in patients after LASEK

    PubMed Central

    Xie, Wen-Juan; Zeng, Jin; Cui, Ying; Li, Juan; Li, Zhong-Ming; Liao, Wei-Xiong; Yang, Xiao-Hong

    2015-01-01

    AIM To conduct a comparative study of effectiveness of silicone hydrogel contact lens and hydrogel contact lens, which are used in patients after laser-assisted subepithelial keratomileusis (LASEK). METHODS Sixty-three patients (121 eyes) with a spherical equivalent ≤-5.0 D were chosen after undergoing LASEK in 2012 at Guangdong General Hospital. They were randomly divided into 2 groups. The silicone hydrogel group included 32 cases (61 eyes) that wore silicone hydrogel contact lenses for 4-6d after the operation, while the hydrogel group included 31 cases (60 eyes) who wore hydrogel contact lenses for 4-6d after the operation. Patients' self-reported postoperative symptoms (including pain, photophobia, tears, and foreign body sensation) were evaluated. The healing time of the corneal epithelium, the visual acuity of patients without contact lens after epithelial healing, and the incidence of delayed corneal epithelial shedding were also assessed. The follow-up time was 1mo. RESULTS Postoperative symptoms were milder in the silicone hydrogel group than in the hydrogel group. There were significant differences in pain, foreign body sensation, and photophobia between the 2 groups (P<0.05), although there was no significant difference in postoperative tearing (P>0.05). The healing time of the corneal epithelium in the silicone hydrogel lens group was markedly shorter than that in the hydrogel group (4.07±0.25 vs 4.33±0.82d, t=2.43, P=0.02). Visual acuity without contact lenses after healing of the corneal epithelium was better in the silicone hydrogel group compared with the hydrogel group (χ2=7.76, P=0.02). There was no significant difference in the occurrence of delayed corneal epithelial shedding between the 2 groups (P>0.05). CONCLUSION Patients with LASEK using silicon hydrogel contact lenses had less discomfort and shorter corneal epithelial healing time compared with those using hydrogel contact lenses, suggesting that silicon hydrogel contact lenses may

  20. 50 CFR 253.12 - Guaranteed note, U.S. note, and security documents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Guaranteed note, U.S. note, and security documents. 253.12 Section 253.12 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC... Fisheries Obligation Guarantee Program § 253.12 Guaranteed note, U.S. note, and security documents....