Science.gov

Sample records for 14fig 15fig 16fig

  1. Presidential Address: The Woman in the Case Jane Todd Crawford, 1763-1842

    PubMed Central

    Sparkman, Robert S.

    1979-01-01

    The 1978 Presidential Address of the Southern Surgical Association is dedicated to the wives of the members, past and present, in acknowledgment and appreciation of the enduring contribution that they have made to the quality and character of this association. ImagesFig. 1.Fig. 3.Fig. 4.Fig. 5.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20. PMID:375854

  2. Urinary Tract Refunctionalization After Prior Diversion in Children

    PubMed Central

    Hendren, W. Hardy

    1974-01-01

    Thirty-two children who had undergone previous urinary diversion were operated upon to refunctionalize the bladder. In 24 the diversion had been considered permanent, and in eight, temporary. Success in these procedures suggests that many young patients deserve a second look for possible “undiversion.” ImagesFig. 6.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17a.Fig. 17b.Fig. 18. PMID:4416811

  3. Mediastinoscopy: a diagnostic procedure in hilar and paratracheal lymphadenopathy

    PubMed Central

    Mikhail, J. R.; Mitchell, D. N.

    1971-01-01

    Mediastinoscopy, in the skilled hands of a thoracic surgeon, is a safe, cosmetically accepted procedure with negligible complications, less than that reported in many series of scalene node biopsies. It has the advantage of yielding a much higher rate of diagnostic tissue, in all instances over 90%. In the cases of tuberculosis it enabled an organism to be isolated and sensitivities obtained. It has also revealed a group of cases with findings, a further study of which may increase our understanding, assessment and management of patients presenting with hilar and/or paratracheal lymphadenopathy. ImagesFig. 1Fig. 2Figs. 3-6Figs. 7-10Fig. 11Fig. 12Figs. 13 and 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:4110536

  4. Intermediate hosts of Schistosoma

    PubMed Central

    Mandahl-Barth, G.

    1957-01-01

    This study is an attempt to classify all described species of African Bulinus. It is based upon the author's examination of a great number of specimens collected from many parts of Africa. The variations attributable to age, environment and genetic factors which may be noted in the taxonomic characters are discussed, and some new species and subspecies are established. For each recognized species and subspecies the author states the distinguishing characters, indicates the geographical distribution, and gives a list of synonyms. ImagesFig. 1Fig. 2Fig. 2(concluded)Fig. 3Fig. 4Fig. 5Fig. 5(continued)Fig. 5(concluded)Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 16(concluded)Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 22(concluded)Fig. 23 PMID:13479773

  5. Intermediate hosts of Schistosoma

    PubMed Central

    Mandahl-Barth, G.

    1957-01-01

    This study is an attempt to classify all described species of African Biomphalaria and Bulinus. It is based upon the author's examination of a great number of specimens collected from many parts of Africa. The variations attributable to age, environment and genetic factors which may be noted in the taxonomic characters are discussed, and some new species and subspecies are established. For each recognized species and subspecies the author states the distinguishing characters, indicates the geographical distribution, and gives a list of synonyms. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26Fig. 27Fig. 28Fig. 29Fig. 30Fig. 31Fig. 32Fig. 33Fig. 34Fig. 35Fig. 36Fig. 37 PMID:13479768

  6. Tumours of the lung

    PubMed Central

    Stünzi, H.; Head, K. W.; Nielsen, S. W.

    1974-01-01

    Lung tumours are not common in domestic animals; there has not been the increase in epidermoid carcinomas and anaplastic small-cell carcinomas that has occurred in man this century. Adenocarcinoma is the most common type in animals. The biological behaviour of each type of tumour in animals seems to be much the same as in man. The tumours are described histologically, the main categories being: epidermoid carcinoma, anaplastic carcinoma, adenocarcinoma, combined epidermoid and adenocarcinoma, carcinoid tumours, bronchial gland tumours, benign tumours, and sarcomas. ImagesFig. 13Fig. 14Fig. 15Fig. 16Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12 PMID:4371738

  7. An ultrastructural study of the cere of the domestic pigeon (Columba livia).

    PubMed Central

    Purton, M D

    1988-01-01

    The relative scarcity of primary and secondary skin infections in birds depends, at least in part, on the functional morphological barrier presented by the avian integument. Both transmission and scanning electron microscopical techniques were used to study the ultrastructural morphology of the epidermal barrier in the cere of the domestic racing pigeon. The epidermis is composed of sebokeratocytes which are responsible for producing not only the keratin proteins of the keratinized stratum corneum, but also the lipid emulsion forming the surface lipid layer and filling the intercellular spaces. The possible importance and role of these components in the defensive barrier presented by the skin is discussed. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 PMID:3198483

  8. Morphology and morphogenesis of arenaviruses*

    PubMed Central

    Murphy, Frederick A.; Whitfield, Sylvia G.

    1975-01-01

    Arenaviruses have unique structural characteristics; they are pleomorphic, have a mean diameter of 110-130 nm, and consist of a membranous envelope with surface projections surrounding an interior containing ribosomes and filaments. Virus particles bud from plasma membranes of infected cells and in many cases large intracytoplasmic inclusion bodies are formed. These characteristics allow generic identification, but not differentiation of individual viruses. Ultrastructural identification of virus particles and pathological processes in infected tissues of man and experimental animals is important in understanding the nature of arenaviral pathogenesis Such identification also contributes to our understanding of the mechanisms of viral shedding and transmission in reservoir host species. ImagesFig. 3Fig. 4Fig. 5Fig. 11Fig. 12Fig. 13Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 1Fig. 2Fig. 14Fig. 15Fig. 16Fig. 17 PMID:182396

  9. The Spleen in Type I Hyperlipoproteinemia

    PubMed Central

    Ferrans, Victor J.; Buja, L. Maximilian; Roberts, William C.; Fredrickson, Donald S.

    1971-01-01

    Histochemical, biochemical, microfluorometric and electron microscopic studies were made of the spleen of a patient with type I hyperlipoproteinemia. Foam cells were observed that contained a material identified as ceroid on the basis of its autofluorescence, acid-fastness, sudanophilia, PAS-positivity and insolubility in organic solvents. Electron microscopy showed that the ceroid was organized in the form of granules with concentric lamellae of irregular periodicity. The process of formation of these granules is described in detail. The ceroid was considered to represent nondigestible end products of the metabolism of chylomicrons taken up by macrophages in splenic sinusoids. ImagesFig 10Fig 11Fig 12Fig 13Fig 25Fig 26Fig 27Fig 18Fig 19Fig 20Fig 4Fig 5Fig 6Fig 7Fig 8Fig 9Fig 15Fig 1Fig 2Fig 3Fig 14Fig 16Fig 17Fig 21Fig 22Fig 23Fig 24Fig 28Fig 29 and 30 PMID:4326635

  10. Pathological changes in the navicular bone and associated structures of the horse.

    PubMed Central

    Doige, C E; Hoffer, M A

    1983-01-01

    Navicular bones from 74 horses were examined at necropsy. Animals ranged in age from eight months to 30 years. Eight horses had a clinical history of navicular disease. Degenerative lesions in the fibrocartilaginous surface of the navicular bone and of the surface of the deep flexor tendons were age related changes not necessarily related to lameness. These lesions were more extensive in horses with a history of navicular disease, and were often accompanied by adhesions and subchondral cavitation of the fibrocartilaginous surface of the navicular bone. Osteophytes, present in 12 of the 74 horses, appeared to be age-related and were uncommon in horses with a history of navicular disease. Nutrient foramina on the distal border of the navicular bone were highly variable in size and shape; in horses with a history of navicular disease they often had a small external opening that became larger as it penetrated the bone. Occlusive vascular disease (arteriosclerosis) was found in sound horses and in horses with a history of navicular disease. Thrombosis of arteries or ischemic necrosis of bone was not identified in any case. Images Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. PMID:6667428

  11. Early Development of and Pathology Associated with Strongylus edentatus

    PubMed Central

    McCraw, B. M.; Slocombe, J. O. D.

    1974-01-01

    Pony foals inoculated with infective Strongylus edentatus larvae were monitored for clinical signs and selected blood changes and were examined at necropsy from two to 56 days postinfection. Larvae penetrated the intestine and reached the liver intravenously before 40 hours postinfection. Occasional thrombi and larval tracks associated with the intima of cecal and colic veins suggested aberrant paths. Larvae in the liver doubled in width between seven and 15 days postinfection and a sudden increment in circulating eosinophils occurred between 11 and 15 days. These changes were probably associated with the third molt. At 30 days fourth stage larvae were migrating in the liver; at 42 days they were present in the hepatorenal ligament. White foci were observed in the liver from two to 56 days. They contained mononuclear cells and eosinophils and later necrotic cores of eosinophils. By one month foci were overshadowed by tortuous tracks of migrating larvae. Aberrant larvae in the lungs were confined in granulomas. Massive granulomas in the wall of the cecum and colon contained small larvae which were probably inhibited by antibody associated with the third molt. Severe disruption of omental architecture and adhesions involving the intestine occurred several weeks after infection. ImagesFig. 1.Fig. 2.Fig. 3.Fig. 4.Fig. 5.Fig. 6.Fig. 7.Fig. 8.Fig. 9.Fig. 10.Fig. 11.Fig. 12.Fig. 13.Fig. 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18.Fig. 19.Fig. 20.Fig. 21.Fig. 22.Fig. 23.Fig. 24. PMID:4274818

  12. Pediatric osteomyelitis and septic arthritis: the pathology of neonatal disease.

    PubMed Central

    Ogden, J. A.

    1979-01-01

    The morphologic and histologic examination of over fifty-five foci of metaphyseal/epiphyseal osteomyelitis and eleven septic joints from five cases of neonatal osteomyelitis and joint sepsis are described in detail. The severity of the bone and joint involvement varied considerably, allowing a better understanding of the pathophysiologic sequence of events in the disease in the neonatal time period. Of particular importance were (1) the multifocal nature of the disease, (2) the highly variable destruction of the growth plate (physis) by several discrete mechanisms, and (3) the invasion of the chondroepiphysis through the cartilage canal systems. Two of the cases died from respiratory complications several months following presumed successful treatment of their skeletal infections. S&pecimens showed significant growth plate damage continuing beyond the neonatal period. These findings support the need for rapid diagnosis and drainage, whenever feasible, to prevent long-term skeletal growth damage. The severity of involvement also should emphasize that this disease, especially in the neonate, is not an innocuous condition, as a recent review suggested. Images FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 PMID:524924

  13. The microstructure of colonies of the Connaught BCG strain*

    PubMed Central

    Šula, L.

    1970-01-01

    It has previously been shown that there is a certain correlation between the biological properties of BCG strains—properties on which their immunogenicity and allergenicity depend—and the macroscopic appearance of the growth of these colonies on solid and liquid media. To investigate this phenomenon in greater detail, the author examined the microstructure of colonies of the Connaught BCG strain grown on both solid and liquid media. Colonies were fixed in agar, embedded in paraffin, sectioned and stained by the Ziehl-Neelsen technique. A striking finding was the alternation of acid-fast and non-acid-fast zones in colonies grown on bovine-serum agar or Ogawa egg medium; the strata nearest the surface of the solid media were usually more acid-fast than were the deeper strata. Colonies grown in Šula's liquid medium, on the other hand, showed no such stratification and were equally acid-fast at all points. These differences may be the result of genetic factors or of the different nutritional conditions provided by solid and liquid media. ImagesFIG. 9FIG. 10FIG. 11FIG. 12FIG. 13FIG. 14FIG. 15FIG. 16FIG. 1FIG. 2FIG. 3FIG. 4FIG. 5FIG. 6FIG. 7FIG. 8 PMID:4925828

  14. Current Concepts of the Pathogenesis and Pathology of Inflammatory Lesions of the Intestine

    PubMed Central

    Shnitka, Theodor K.

    1964-01-01

    The histopathologic lesions of regional enteritis and ulcerative colitis, particularly in their early stages, are distinct and distinguishable, irrespective of the sites that are involved. Regional enteritis is characterized by lymphangiectasis, lymphedema, lymphoid hyperplasia, and granulomatous inflammation of the submucosal and subserosal layers of intestine, whereas chronic ulcerative colitis is an exudative, ulcerative disorder of the mucosal layer that commences with “crypt abscesses” and only in its later stages progresses to deeper coats of the wall. Electron microscopy of a rectal biopsy from a juvenile patient with chronic ulcerative colitis for five years disclosed a labyrinthine system of clefts and compartments between columnar, mucosal epithelial cells. Regenerated colonic epithelial cells were of primitive, germinal type and featured a “vesicular” rather than a “goblet” pattern of mucus secretion. Clusters of small “clavate fimbriae” projected from the tips of microvilli. Each of these newly recognized substructures measured 30 to 60 mμ. in diameter, and was enclosed by a tri-laminar “unit membrane”, derived from the surface plasma membrane of the cell. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19 PMID:14182565

  15. Conservative surgical treatment of reflux esophagitis and esophageal stricture.

    PubMed Central

    Herrington, J L; Wright, R S; Edwards, W H; Sawyers, J L

    1975-01-01

    During a recent 3-year period, 17 consecutive patients were seen with advanced fibrotic esophageal strictures secondary to alkaline-acid-pepsin reflux. From detailed preoperative evaluations alone it was impossible to determine whether therapy should consist of excisional surgery, esophagogastroplasty or intra-operative dilatation with correction of reflux. Only at operation could the length, extent, degree and severity of the stricture be fully determined. Each of the 17 patients was treated by controlled dilatation, coupled with an antireflux procedure. This simplified approach proved successful on strictures thought preoperatively to be undilatable. It appears that this conservative approach is applicable to many advanced strictures and excisional and plastic procedures should be reserved for those cases that prove unyielding to intraoperative dilatation. The true appraisal of a reflux stricture and the choice of surgical procedure is best determined at the operating table. Images Fig. 5A. Fig. 5B. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. Fig. 19. Fig. 20. Fig. 21. PMID:1130874

  16. Tumours of the upper alimentary tract

    PubMed Central

    Head, K. W.

    1976-01-01

    Tumours of the oropharynx of domestic animals are common in most parts of the world, but squamous cell carcinoma of the upper alimentary tract shows differences in prevalence in different geographical areas and occurs at different sites in the various species. Oral tumours of the melanogenic system are more common in dogs than in man. The following main histological categories, which broadly correspond to those used in the classification of tumours of man, are described: papilloma; squamous cell carcinoma; salivary gland tumours; malignant melanoma; tumours of soft (mesenchymal) tissues; tumours of the facial bones; tumours of haematopoietic and related tissues; and odontogenic tumours and jaw cysts. Papilloma, squamous cell carcinoma, malignant melanoma, fibroma, and fibrosarcoma account for about 80% of the tumours that occur in the upper alimentary tract of domestic animals. ImagesFig. 6Fig. 7Fig. 8Fig. 9Fig. 34Fig. 35Fig. 36Fig. 37Fig. 2Fig. 3Fig. 4Fig. 5Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26Fig. 27Fig. 28Fig. 29Fig. 14Fig. 15Fig. 16Fig. 17Fig. 30Fig. 31Fig. 32Fig. 33Fig. 18Fig. 19Fig. 20Fig. 21Fig. 10Fig. 11Fig. 12Fig. 13Fig. 1 PMID:1086147

  17. Sertoli cells and various types of multinucleates in the rat seminiferous tubules following temporary ligation of the testicular artery.

    PubMed Central

    Kaya, M

    1986-01-01

    The effects of temporary ligation of the testicular artery have been analysed in rats with respect to Sertoli cells and multinucleated spermatogenic cells. The first cells to show ultrastructural changes are the Sertoli cells which progressively degenerate, leading to complete necrosis as the duration of ligation and post-ligation survival interval increases. The degree of degeneration of spermatogenic cells depends on the severity of Sertoli cell destruction. Temporary ligation of the testicular artery causes the formation of various types of multinucleated spermatogenic cells in the seminiferous epithelium. The mechanisms involved in the multinucleate formation are cell fusion, karyokinesis devoid of cytokinesis and phagocytosis. The variety of noxious agents causing formation of multinucleated spermatogenic cells in the seminiferous tubules of a number of species including man implies that the occurrence of multinucleated spermatogenic cells is not a specific response of the testis to a particular type of agent. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:3693041

  18. Ultrastructural study on the plical epithelium of the bursa of Fabricius in chick embryos: influence of partial decerebration and hypophyseal allografts.

    PubMed Central

    Romano, N; Baldassini, M R; Abelli, L; Aita, M; Mastrolia, L

    1996-01-01

    The bursa of Fabricius of 18 day normal and partially decerebrated chick embryos, and partially decerebrated embryos bearing a hypophyseal allograft was analysed by scanning and transmission electron microscopy, focusing on the ultrastructural characterisation of the plical epithelium. The plicae of the normal bursa consist of interfollicular (IFE) and follicle associated epithelium (FAE). The FAE is composed of typical polygonal cells and is supported by a layer of epithelial cells which appears as a continuation of the corticomedullary epithelium. Bordering cells lie between the FAE and IFE. The IFE is composed of 4 cell types: (1) undifferentiated, (2) goblet, at various stages of maturity, (3) prismatic, and (4) globular light cells. Partially decerebrated embryos showed a gross impairment of plical epithelium development and the complex of FAE and IFE cells was largely undifferentiated. Partially decerebrated embryos with a hypophyseal allograft displayed the same cellular types as observed in controls, thus indicating a restored differentiation of plical epithelium. These findings suggest that the hypophysis affects the differentiation of plical epithelium during ontogenesis. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Figs 8-11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:8655413

  19. Development of the ovary in the brushtail possum Trichosurus vulpecula (Marsupialia).

    PubMed Central

    Ullmann, S L

    1996-01-01

    The urogenital region of 25 fetuses and 75 pouch young, ranging in age from newborn to 103 days (d) in development, was examined in serial histological sections. The rete ridges formed the anterior extensions of the gonadal ridges and gave rise to the rete system and gonads respectively. Sexual differentiation of the ovary commenced 2.5 d after birth, when 2 cell types appeared: the larger of these then clumped together to form the medullary cords, while the smaller cells gave rise to the stroma. Primordial germ cells were still migrating, dividing and populating the peripheral gonadal regions on d 8. Cortex and medulla were distinguishable by d 12, when a thick fibrous zone separated them. The cortex was augmented by cells from the mesothelium. The rete ovarii developed from cell condensations within the rete ridges, made secondary contact with the mesonephroi and penetrated the ovaries but did not contribute to the granulosa cells. It is concluded that, contrary to the situation in most eutherians, in Trichosurus, as in other marsupials examined, the mesonephros does not contribute to rete formation, or to the granulosa cells, which appear to arise from the medullary cords. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figs. 7-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Figs. 22-23 PMID:8982841

  20. Encrustation and Atherosclerosis: The Analogy Between Early in Vivo Lesions and Deposits Which Occur in Extracorporeal Circulations

    PubMed Central

    Murphy, E. A.; Rowsell, H. C.; Downie, H. G.; Robinson, G. A.; Mustard, J. F.

    1962-01-01

    A study was made of the relation between the pattern and topography of thrombus formation in models of various vessel configurations coupled into extracorporeal shunts in swine and the development of atherosclerosis at corresponding sites on swine aortas. The pattern and distribution of deposits formed in the models were strikingly similar to the pattern and distribution of incipient atherosclerosis at comparable sites in the vascular tree. The earliest and only consistent component of the flow chamber deposits was the blood platelet. The platelet deposits would frequently stain with oil red O. The cholesterol level of washed human platelets was found to show a good correlation with that in the plasma. This evidence suggests that deposition of particulate matter (chiefly platelets), largely determined by the hydraulic factors, may be an important factor in the early, as well as later, stages of atherosclerosis. ImagesFigs. 10a and bFig. 13Fig. 21Fig. 1Fig. 3Figs. 4a and bFig. 5Fig. 6aFig. 6bFig. 7Fig. 8Fig. 9Fig. 11Fig. 12Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:14477412

  1. Tumours of bones and joints

    PubMed Central

    Misdorp, W.; Van Der Heul, R. O.

    1976-01-01

    Tumours of bones and joints are not infrequent in dogs but are rare in other domestic animals. In the dog, most bone tumours are malignant; osteosarcomas are by far the most frequently encountered tumours, especially in giant breeds and boxers. The following main categories of bone tumour are described: bone-forming, cartilage-forming, giant cell, marrow, vascular, miscellaneous, metastatic, unclassified, and tumour-like lesions. The tumours of joints and related structures are classified as synovial sarcomas, fibroxanthomas, and malignant giant cell tumour of soft tissues. ImagesFig. 21Fig. 22Fig. 23Fig. 24Fig. 17Fig. 18Fig. 19Fig. 20Fig. 29Fig. 30Fig. 31Fig. 32Fig. 33Fig. 34Fig. 35Fig. 36Fig. 25Fig. 26Fig. 27Fig. 28Fig. 1Fig. 2Fig. 3Fig. 4Fig. 37Fig. 38Fig. 39Fig. 40Fig. 5Fig. 6Fig. 7Fig. 8Fig. 13Fig. 14Fig. 15Fig. 16Fig. 9Fig. 10Fig. 11Fig. 12 PMID:1086157

  2. Variability of dermal elastin visualized ultrastructurally with iron hematoxylin.

    PubMed Central

    Spicer, S. S.; Brissie, R. M.; Thompson, N. T.

    1975-01-01

    The Verhoeff iron hematoxylin-lead citrate (VIH-LC) method demonstrated vertical elastic fibers that were often composed only of microfibrillar component extending into the epidermal basement membrane in human skin. These fibers connected with a network of trabeculae composed of microfibrils and elastin fibrils in varying proportions. The large elastic fibers in the deep two thirds of the dermis consited mainly of compact bundles of small elstin fibrils in infants and of solid elastin cores with a fimbriated periphery in adults; Dermis of a 6-month-old fetus contained very few small elastic fibrils except around blood vessels. Skin of an elderly subject revealed exteme proliferation of unusual reticulated elastic fibers in various areas and disclosed abnormal nodules of elastin or collagen fibrils in finely particulate matter. Small elastin fibrils, abundant microfibrils, and intermixed individual collagen fibrils comprised an adventitial collar between sweat glands and fibroblasts. Elastin fibrils were absent from this collar in the fetus and increased with the subject's age. A permanganate-high iron diamine sequence appeared to impart density to the microfibrillar component of elastic fibers. Images Figs 6-7 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 Fig 1 Fig 2 Figs 3-5 Fig 28 Fig 29 Fig 30 Fig 31 Fig 32 Fig 33 PMID:49149

  3. Electron Microscopy of the Cell

    PubMed Central

    Leeson, T. S.

    1965-01-01

    The use of the electron microscope has added much to our knowledge of the cell. The fine structure of the component parts of the nucleus and the cytoplasm is described, and their functions are indicated. The nature and structural modifications of the plasma membrane are illustrated with particular reference to function. To illustrate the interrelationships of the nucleus and cytoplasm, the theory of protein secretion is discussed, the secretion of a particular protein or polypeptide being determined by a particular nucleotide sequence in the desoxyribonucleic acid of a chromosome, that is, by a gene. This information is transferred from nucleus to cytoplasm. It is in the cytoplasm that the majority of the work is performed while the nucleus directs the work of the cell. ImagesFig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23Fig. 24Fig. 25Fig. 26 PMID:5829410

  4. The Fine Structure of Experimentally Induced Connective Tissue Complexes in the Human

    PubMed Central

    Stinson, W. W.; Richter, K. M.; Schilling, J. A.

    1974-01-01

    The growth, development and cellular activity of fibrocollagenous tissue complexes induced by the implantation of specially structured wire mesh cylinders in 22 human male volunteers were studied during the time course of fibroplasia utilizing light and electron microscopic techniques. The fibrocollagenous tissue complexes after 4 to 16 weeks of development demonstrated highly ordered lamellations made of zones consisting primarily of fibroblasts and zones consisting primarily of collagenous fibers. The development of the ordered lamellations is referable to specific fibrillogenic activities by the constituent fibroblasts. The initial role of the fibroblast in fibrillogenesis is indicative of an apocrine-like secretory process followed by a holocrine-like role which results in cytodestruction and concurrent formation of an avascular collagenic tissue referable to an organizing cicatrix in a healing wound. ImagesFigs. 1-3.Figs. 4-9.Fig. 10.Fig. 11.Fig. 12.Figs. 13, 14.Fig. 15.Fig. 16.Fig. 17.Fig. 18, 19.Figs. 20-22.Fig. 23.Fig. 24. PMID:4599224

  5. Radiologic assessment in the pediatric intensive care unit.

    PubMed Central

    Markowitz, R. I.

    1984-01-01

    The severely ill infant or child who requires admission to a pediatric intensive care unit (PICU) often presents with a complex set of problems necessitating multiple and frequent management decisions. Diagnostic imaging plays an important role, not only in the initial assessment of the patient's condition and establishing a diagnosis, but also in monitoring the patient's progress and the effects of interventional therapeutic measures. Bedside studies obtained using portable equipment are often limited but can provide much useful information when a careful and detailed approach is utilized in producing the radiograph and interpreting the examination. This article reviews some of the basic principles of radiographic interpretation and details some of the diagnostic points which, when promptly recognized, can lead to a better understanding of the patient's condition and thus to improved patient care and management. While chest radiography is stressed, studies of other regions including the upper airway, abdomen, skull, and extremities are discussed. A brief consideration of the expanding role of new modality imaging (i.e., ultrasound, CT) is also included. Multiple illustrative examples of common and uncommon problems are shown. Images FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 FIG. 21 FIG. 22 FIG. 23 FIG. 24 FIG. 25 FIG. 26 FIG. 27 FIG. 28 FIG. 29 FIG. 30 FIG. 31 FIG. 32 FIG. 33 PMID:6375164

  6. Ultrastructure of rabbit semilunar cartilages.

    PubMed Central

    Ghadially, F N; Thomas, I; Yong, N; Lalonde, J M

    1978-01-01

    A light and transmission electron microscopical study of 6 to 8 months old rabbit semilunar cartilages has shown that the cells in this tissue resemble chondrocytes more than fibroblasts. The prominent organelles in these cells were rough endoplasmic reticulum and the Golgi complex. An unusual finding was the occurrence of filamentous material in Golgi sacs and vesicles, and collagen fibrils within smooth membrane-bound tubular structures, apparently within the cells. Collagen fibrils forming fibres, fibre bundles and lamellae constituted the major component of the menisci. Protein-polysaccharide particles and associated fine filaments were found in the interfibrillary matrix and in the sparse territorial matrix adjacent to the chondrocytes. Numerous immature elastic fibrils, and rare mature elastic fibres with an electorn-lucent amorphous core, were also found in the general matrix amongst the collagen fibrils. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 PMID:580431

  7. Electron microscope cytochemistry of host—parasite membrane interactions in malaria*

    PubMed Central

    Langreth, Susan G.

    1977-01-01

    Two membrane-bound enzymes were localized by electron microscope cytochemical techniques in Plasmodium lophurae and its host erythrocyte. Parasites were prepared by saponin lysis, French pressure cell lysis, or anti-red blood cell serum lysis; infected and uninfected erythrocyte ghosts were prepared by saponin or French pressure cell lysis. Enzyme incubations were performed on unfixed cells. Adenosinetriphosphatase (EC 3.6.1.3) activity was found on the inside of the ghost membrane and on the inside of the outer parasite membrane. NADH oxidase was found on the outside of the erythrocyte membrane and on the outside of the parasite outer membrane. The parasite plasma membrane was negative for both enzymes. The location of both enzymes on the outer parasite membrane were reversed from what one would have expected if the outer membrane had remained merely an invaginated erythrocyte membrane. It is concluded that the outer membrane, although derived from the red cell membrane, has been altered by its association with the malarial parasite. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20 PMID:145326

  8. Cryoscanning electron microscopic study of the surface amorphous layer of articular cartilage.

    PubMed Central

    Kobayashi, S; Yonekubo, S; Kurogouchi, Y

    1995-01-01

    In order to elucidate the structure near the articular surface, frozen unfixed hydrated articular cartilage with subchondral bone from the pig knee was examined using a cryoscanning electron microscope (cryo-SEM). This method is considered to reduce the introduction of artefacts due to fixation and drying. An amorphous layer, without a collagen-fibril network or chondrocytes, covered most of the surface of the cartilage. This layer was termed the surface amorphous layer. It showed various appearances, which were classified into 4 groups. The average thickness of the layer did not differ among the 8 anatomical regions from which the specimens were taken. The thickness of the layer was found to correlate with the type of appearance of the layer. The 4 appearances associated with thicknesses in descending order are: 'streaked', 'foliate', 'spotted', and 'vestigial'. The surface layer observed in the cryo-SEM was thicker than that observed by a conventional SEM. This difference may be attributable to dehydration of the specimen used in specimen preparation for the latter technique. The layer was also observed in articular cartilage taken from human and rabbit knees. The layer was found to be unstable and to have very variable features. Its thickness and appearance may be influenced by various factors such as dehydration, fluid absorption or mechanical stress. Images Fig. 1 Fig. 3 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:7592006

  9. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  10. The innervation of the adrenal gland. IV. Innervation of the rat adrenal medulla from birth to old age. A descriptive and quantitative morphometric and biochemical study of the innervation of chromaffin cells and adrenal medullary neurons in Wistar rats.

    PubMed Central

    Tomlinson, A; Coupland, R E

    1990-01-01

    The innervation of the adrenal medulla has been investigated in normal Wistar rats from birth to old age and ultrastructural findings compared with biochemical markers of the cholinergic innervation of the adrenal gland and catecholamine storage. Morphological evidence of the immaturity of the innervation during the first postnatal week is provided and using quantitative morphometry the innervation of chromaffin cells is shown to reach a mean total of 5.4 synapses per chromaffin cell during the period 26 days to 12 weeks of age. The variation in contents of synaptic profiles is discussed in the light of recent work that demonstrates a major sensory as well as visceral efferent innervation of the gland. Adrenal medullary neurons usually occur in closely packed groups, intimately associated with Schwann cells. Axodendritic and axosomatic synapses on these neurons are described and the likely origin of axonal processes innervating the neurons discussed. In old age the density of innervation remains the same as in young adult animals even though the medulla shows evidence of hyperplasia and hypertrophy of individual chromaffin cells. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 PMID:2384334

  11. The nuclear membranes in hypertrophied human cardiac muscle cells.

    PubMed Central

    Ferrans, V. J.; Jones, M.; Maron, B. J.; Roberts, W. C.

    1975-01-01

    Nuclear membranes of cardiac muscle cells were studied in 134 patients with cardiac hypertrophy of various causes. Abnormalities observed consisted of: a) increased foldings and convolutions; b) nuclear pseudoinclusions formed by cytoplasmic organelles protruding into saccular invaginations of the nuclear membranes, and c) intranuclear tubules. The increased foldings and convolutions of the nuclear membranes and the nuclear pseudoinclusions appear to result from synthesis of nuclear membranes in excess of that needed to accommodate the increase in nuclear volume which occurs in hypertrophy. Intranuclear tubules were found in 6 patients and consisted of tubular invaginations, 400 to 650 A in diameter, of the inner nuclear membranes into the nucleoplasm. Some of these tubules were straight and cylindrical, and were associated with a peripheral layer of marginated chromatin; others were not associated with chromatin, appeared coiled and followed irregular courses. Intranuclear tubules in cardiac muscle cells probably represent an extreme cellular response to the stimulus of hypertrophy. Images Fig 21 Fig 11 Fig 12 Fig 13 Fig 14 Fig 1 Fig 15 Fig 2 Figs 3 and 4 Fig 5 Fig 16 Fig 17 Fig 6 Fig 18 Fig 7 Fig 8 Fig 9 Fig 10 Fig 19 Fig 20 PMID:164122

  12. Immunologic Observations in Canine Interstitial Nephritis

    PubMed Central

    Krohn, Kai; Mero, Matti; Oksanen, Aili; Sandholm, Markus

    1971-01-01

    Immunofluorescence studies in cases of chronic interstitial nephritis (CIN) in the dog demonstrated deposition of canine IgC and C'3 in the thickened capillary walls of the glomeruli and in the mesangium. Eluates obtained from the nephritic kidneys contained antibodies of IgG type and reacted with autologous or homologous nephritic kidneys but not with normal kidneys or with any normal canine tissue. The staining pattern of fluorescein-conjugated eluates was similar to that obtained with anti-canine IgG or anti-canine C'3. The eluates did not contain leptospiral antibodies. The findings indicate that complement-fixing immune complexes are deposited in the damaged glomeruli in CIN. The nature of the antigen involved in these complexes is unknown, but it does not seem to be a component of normal canine tissue and could thus be viral or bacterial. ImagesFig 5Fig 6Fig 7Fig 8Fig 13Fig 14Fig 15Fig 16Fig 9Fig 10Fig 11Fig 12Fig 1Fig 2Fig 3Fig 4 PMID:4106382

  13. Regression of atherosclerosis by the intravenous infusion of specific biochemical nutrient substrates in animals and humans.

    PubMed Central

    Dudrick, S J

    1987-01-01

    Preliminary studies in 400 New Zealand albino rabbits produced a reliable animal model of nutrient-induced atherosclerosis that simulated that observed in humans. Atherosclerosis was then induced in an additional 1600 rabbits in sets of 40 animals each, maintaining plasma cholesterol concentrations between 1000 and 2000 mg/dL for 6-20 weeks. In each set, 10 control rabbits were killed to document baseline atherosclerosis, and the other 30 rabbits were assigned randomly to one of three groups of 10 rabbits. Groups of 10 rabbits were either continued on the atherogenic diet (group I), given standard laboratory rabbit pellets (group II), or infused continuously with specially formulated anticholesterol solutions via central venous catheters (group III) for 6 weeks. At autopsy, atherosclerotic lesions consistently involved 85-95% of the aorta in group I. In group II, atherosclerosis was comparable with the baseline control group with no regression. In group III, regression of atherosclerosis by 90-95% was consistently documented. Correlations between plasma amino acids and plasma cholesterol concentrations were established in four humans with severe atherosclerosis to maximize the cholesterol reduction capacity of the amino acid formulation. Infusion of the modified total parenteral nutrition solution induced prompt reduction in plasma cholesterol levels by 40-60% regardless of the initial level and was accompanied by evidence of regression of atherosclerosis after a 90-day infusion therapy period. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 18. Fig. 19. Fig. 20. PMID:3115205

  14. Structural changes in fluorosed dental enamel of red deer (Cervus elaphus L.) from a region with severe environmental pollution by fluorides.

    PubMed Central

    Kierdorf, U; Kierdorf, H; Sedlacek, F; Fejerskov, O

    1996-01-01

    A macroscopic, microradiographic and scanning electron microscope study was performed on the structure of fluorosed dental enamel in red deer from a fluoride polluted region (North Bohemia, Czech Republic). As was revealed by analysis of mandibular bone fluoride content, the rate of skeletal fluoride accumulation in the fluorotic deer was about 6 times that in controls taken from a region not exposed to excessive fluoride deposition. In all fluorosed mandibles, the 1st molar was consistently less fluorotic than the other permanent teeth. This was related to the fact that crown formation in the M1 takes place prenatally and during the lactation period. Fluorosed teeth exhibited opaque and posteruptively stained enamel, reduction or loss of enamel ridges, moderately to grossly increased wear and, in more severe cases, also enamel surface lesions of partly posteruptive, partly developmental origin. Microradiographically, fluorosed enamel was characterised by subsurface hypomineralisation, interpreted as a result of fluoride interference with the process of enamel maturation. In addition, an accentuation of the incremental pattern due to the occurrence of alternating bands with highly varying mineral content was observed in severely fluorosed teeth, denoting fluoride disturbance during the secretory stage of amelogenesis. A corresponding enhancement of the incremental pattern was also seen in the dentine. The enamel along the more pronounced hypoplasias consisted of stacked, thin layers of crystals arranged in parallel, indicating that the ameloblasts in these locations had lost the distal (prism-forming) portions of their Tomes processes. The findings of the present study indicate that red deer are highly sensitive bioindicators of environmental pollution by fluorides. Images Figs 2-9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 PMID:8655406

  15. Tumours and dysplasias of the mammary gland

    PubMed Central

    Hampe, J. F.; Misdorp, W.

    1974-01-01

    As mammary tumours occur frequently in the dog and cat but rarely in other domestic animals, only the tumours of these two species are classified. The epithelial tumours are termed “complex” when they consist of cells resembling both secretory and myoepithelial cells: these tumours are biologically less malignant than tumours of the “simple” type in which only one of these kinds of cell is present. The carcinomas are subdivided into adenocarcinoma, solid carcinoma, spindle cell carcinoma, anaplastic carcinoma, squamous cell carcinoma, and mucinous carcinoma. The term “carcinosarcoma or malignant mixed tumour” was used only when there were cells morphologically resembling not only one or both of the epithelial components but also connective tissue cells with their products of differentiation. The benign tumours are classed as adenoma, papilloma, fibroadenoma, or benign soft tissue tumour. The dysplasias are described under the following headings: cyst, adenosis, regular typical epithelial proliferation in ducts and lobules (epitheliosis), duct ectasia, fibrosclerosis, and lobular hyperplasia. ImagesFig. 41Fig. 42Fig. 43Fig. 44Fig. 5Fig. 6Fig. 7Fig. 8Fig. 13Fig. 14Fig. 15Fig. 16Fig. 45Fig. 46Fig. 47Fig. 48Fig. 17Fig. 18Fig. 19Fig. 20Fig. 25Fig. 26Fig. 27Fig. 28Fig. 29Fig. 30Fig. 31Fig. 32Fig. 21Fig. 22Fig. 23Fig. 24Fig. 37Fig. 38Fig. 39Fig. 40Fig. 9Fig. 10Fig. 11Fig. 12Fig. 1Fig. 2Fig. 3Fig. 4Fig. 33Fig. 34Fig. 35Fig. 36 PMID:4371737

  16. Surface ultrastructure of the epithelia lining the normal human lower urinary tract.

    PubMed Central

    Newman, J.; Hicks, R. M.

    1981-01-01

    The finding of cells with pleomorphic microvilli in urinary sediments has been proposed as an indicator for urothelial neoplasia. Recently, in addition to such cells, others with less bizarre, non-pleomorphic microvilli have also been found in urothelial cancers, and these cells are similar in appearance to others detected in the urinary sediments of healthy people. When using scanning electron microscopy as a diagnostic tool, these cells are a possible source of confusion. The entire lower urinary tracts from people free of urothelial neoplasia have therefore been examined to delineate the normal surface appearance of all cell types which could appear in the urine. There are 4 predominant cell types: the large, flat squamous cells of the urethral meatus which have abundant microridges; cells with mucus-coated, short, stubby microvilli lining the urethra and renal papilla; immature urothelial cells with chains and ridges of bleb-like processes in the ureters and bladder; and, also in the ureters and bladder, mature urothelial cells with microridges or ruffles. The lining epithelia of the normal urethra and renal papilla may thus contribute cells with non-pleomorphic stubby microvilli to urine sediments, which cannot be differentiated by scanning electron microscopy alone from similar cells derived from urothelial neoplasms. However, the normal complement of cells lining the adult lower urinary tract does not include any with prolific, long, pleomorphic microvilli such as characterize transitional-cell carcinomas of the urothelium. Images Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 PMID:7248168

  17. A light and electron microscopic quantitative analysis of the innervation of axillary lymph nodes in juvenile and old rats.

    PubMed Central

    Novotny, G E; Schöttelndreier, A; Heuer, T

    1993-01-01

    The innervation of axillary lymph nodes from 20 juvenile rats (aged < 6 wk) was compared with that of 20 old rats (aged > 2 y). One half of each group was investigated by light microscopy on silver-impregnated paraffin sections, the other half by electron microscopy. The lymph nodes of the old animals were larger than those of juvenile animals, as derived from the volumes analysed by light microscopy. By both light and electron microscopy, the nerves were found to be confined almost exclusively to the medulla and were frequently associated with groups of plasma cells. Nerves identified as cortical in location were consistently found only in cortical areas adjacent to the medulla. In the old animals the nerves were thicker and more prominent in the light microscopic preparations. No such differences were noted at the ultrastructural level. Myelinated nerves were found in all lymph nodes, except in a single old animal. Quantitative analysis of the nerves revealed a significant increase in the density of innervation of the medulla in the old animals both by light and electron microscopy. By light microscopy there also appeared to be a significant increase in the innervation density of the cortex, but these nerves were considered to be mislocalized because of difficulty in precise localisation at this level of magnification. On light microscopy, a significant increase in the incidence of nerve branching was found in the nodes of the old animals. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 PMID:8270476

  18. Radioisotope scanning of brain, liver, lung and bone with a note on tumour localizing agents

    PubMed Central

    Lavender, J. P.

    1973-01-01

    Radioisotopic scanning of brain, liver, lungs and the skeleton is briefly reviewed with a survey of recent developments of clinical significance. In brain scanning neoplasm detection rates of greater than 90% are claimed. The true figure is probably 70-80%. Autopsy data shows a number of false negatives, particularly with vascular lesions. Attempts to make scanning more specific in differentiating neoplasm from vascular lesions by rapid sequence blood flow studies are reviewed. In liver scanning by means of colloids again high success rate is claimed but small metastases are frequently missed and the false negative scan rate is probably quite high. Lung scanning still has its main place in investigating pulmonary embolic disease. Ventilation studies using Xenon 133 are useful, particularly combined with perfusion studies. The various radiopharmaceuticals for use in bone scanning are reviewed. The appearance of technetium labelled phosphate compounds will probably allow much wider use of total skeletal scanning. Research into tumour localizing agents continues, the most recent and interesting being Gallium citrate and labelled bleomycin. Neither agent is predictable however although Gallium may have a place in Hodgkins disease and bronchogenic neoplasm and both may have a place in the detection of cerebral tumours. ImagesFig. 1Fig. 2Fig. 3p452-bFig. 3bFig. 4Fig. 5Fig. 5bFig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 12c & 12dFig. 13Fig. 13 b,c,dFig. 14Fig. 14bFig. 15Fig. 15bFig. 16Fig. 17Fig. 18 PMID:4602127

  19. Cell death during the postnatal morphogenesis of the normal rabbit kidney and in experimental renal polycystosis.

    PubMed Central

    García-Porrero, J A; Ojeda, J L; Hurlé, J M

    1978-01-01

    We have studied, by means of optic and electron microscopy, the normal and abnormal cell death that takes place during the postnatal morphogenesis of rabbit kidney, and in the experimental renal polycystosis produced by methylprednisolone acetate. In the normal kidney intertubular cell death can be observed during the first 20 days of the postnatal development. However, cell death in the normal metanephric blastema is a very rare event. In the polycystic kidney numerous dead cells can be seen between the third and forty eighth days after injection. The topography and morphology of the dead cells depend on the stage in the evolution of the disease. In the 'stage of renal immaturity', dying and dead cells are present in the nephrogenic tissue, in the dilating collecting tubules and in the intertubular spaces. In this stage the cellular pathology is essentially nuclear. In the stage of tubular cysts, the dead cells are mostly located in the walls of cysts, with some dead cells, but mostly cellular debris in their lumina. At this stage the cellular pathology is basically cytoplasmic. The dead cells are eventually digested by what appear to be phagocytes of tubular epithelial origin. It is suggested that cell death is an important factor in the evolution of the lesions of renal polycystosis induced by corticosteroids, and probably in the initiation of the pathological process as well. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:670065

  20. The Histology and Histopathology of the Dental Innervation

    PubMed Central

    Bradlaw, Robert

    1939-01-01

    The presence of a perivascular neural plexus in the periodontal membrane suggests that the dental structures have both sensory and autonomic nerve supply. The fibres described by Mummery are unaffected by section of the inferior dental nerve although there is marked degeneration in all demonstrable nerves. Nerve-fibres have been observed describing simple and complex looping in the odontogenetic zone and others which, running tangentially between the odontoblast layer and the dentine, form a very definite nerve plexus. Attached to these nerve-fibres are numerous round or pear-shaped bodies which may be either nerve-cells or end-organs. Definite nerve-fibres have been traced into the dentine. The convoluted forms described by growing nerve-fibres approaching transplanted teeth did not resemble the nerve-loops previously reported in the periodontal membrane of monkey and man. Plexiform nerve-fibres have been seen in the gum of the cat and varicose nerve-fibres in the gum of the sheep. In man, intra-epithelial fibres have been observed which pass from the intra-papillary neural coils to terminate near the surface of the epithelium in knob-like endings. No abnormality of innervation has been found in supernumerary teeth and teeth from cleft palates, dentigerous and ovarian cysts, and in the pulps of denticles from compound odontomes. Since there is no difference in the innervation of heterogenous and autogenous tooth-germ transplants, whether of normal or abnormal form, it would seem that abnormalities of form are not due to abnormal innervation. The development and degeneration of the peripheral nerves and the changes produced in the dental innervation by local and general disease in man and experimental animals are described and discussed. ImagesFig. 8Fig. 9Fig. 10Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:19992023

  1. Age related changes and osteochondrosis in swine articular and epiphyseal cartilage: light ane electron microscopy.

    PubMed Central

    Bhatnagar, R; Christian, R G; Nakano, T; Aherne, F X; Thompson, J R

    1981-01-01

    Age related changes and osteochondrosis in swine were studied using light microscopy and electron microscopy in articular cartilage and light microscopy and epiphyseal cartilage of swine from three days to 30 weeks of age. Thickness, cellularity and vascularity of both the epiphyseal and articular cartilage, decreased as the swine aged. Osteochondrotic changes included formation of "plugs" of cartilage indicating localized failure of ossification and separation and space formation in epiphyseal cartilage. Eosinophilic streaks and space formation in epiphyseal cartilage was observed in relation to epiphyseal separation. Electron microscopy showed a continuous fibrillar layer on the surface of the cartilage corresponding to the lamina splendens of light microscopy. This layer increased in the thickness and showed accumulation of amorphous material between the fibrils with aging. In the matrix, the orientation and distribution of the collagen fibers changed with growth and thicker fibers with clear sub banding were more common in older age groups. Also, necrotic cells, glycogen containing bodies and cellular debris were noticed in the matrix of normal cartilage in old animals. Chondrocytes in the younger cartilage showed accumulation of organelles responsible for protein synthesis; while Golgi bodies, vesicles, lysosomes, well developed foot processes and other inclusions were noticed in older cartilage. Cartilage erosions had a clumped and disrupted lamina splendens on the surface and electron lucent patches in the ground substances of the matrix and chondrocyte cytoplasm. Images Fig. 1. Fig. 2 and 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10 and 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. Fig. 17. Fig. 18. PMID:7260732

  2. Immunization against gonadotrophin-releasing hormone: histopathological and hormonal changes in the female rat.

    PubMed Central

    Okon, E.; Livni, N.; Koch, Y.

    1980-01-01

    Immunization of female rats against gonadotrophin-releasing hormone (GnRH) resulted in cessation of the oestrus cycles, undetectable serum gonadotrophin levels and a reduction of pituitary gonadotrophin stores and of hypothalamic content of GnRH. Immunization abolished the post-ovariectomy rise in serum levels and in pituitary content of luteinizing hormone (LH) and follicle-stimulating hormone (FSH) without affecting prolactin levels. This suggests that GnRH is involved in the regulation of synthesis as well as the secretion of LH and FSH. Histopathological changes were found in the pituitary, ovaries and uterus of the immunized rats. A marked reduction in the number of gonadotrophs as well as a small decrease in the size of other cells was observed in the pituitaries of rats having high anti-GnRH titres. Rats immunized 5 weeks before castration showed a marked reduction in the number and in the size of castration cells. The ovaries exhibited various degrees of atrophy which were correlated with the anti-GnRH titres. Rats with high anti-GnRH titres revealed extensive atrophy of stromal cells with disappearance of large follicles and corpora lutea; ovaries of rats with low titres of antibodies exhibited small corpora lutea and larger follicles, some of which were cystic. Uteri of rats having high titres of anti-GnRH were severely atrophied with cystic glandular dilation. Uteri of rats with low anti-GnRH titres showed squamous-cell metaplasia and fibrosis of the endometrial stroma. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 PMID:7006665

  3. The harderian gland: a tercentennial review.

    PubMed Central

    Payne, A P

    1994-01-01

    The harderian gland was first described in 1694 by Johann Jacob Harder (1656-1711). It occurs in most terrestrial vertebrates and is located within the orbit where, in some species, it is the largest structure. It may be compound tubular or compound tubuloalveolar, and its secretory duct is usually morphologically distinct only after leaving the substance of the gland to open on the surface of the nictitating membrane. The tubules of the gland are formed of a single layer of columnar epithelial cells surrounded by myoepithelial cells. The chief product(s) of the gland varies between different groups of vertebrates, and epithelial cells possess granules or vacuoles whose contents may be mucous, serous or lipid. In rodents, the gland synthesises lipids, porphyrins and indoles. In the case of lipid vacuoles, the gland is unusual in releasing these by an exocytotic mechanism. It is unclear whether the gland can act both as an exocrine and endocrine organ. There is control of gland structure and synthesis through a variety of humoral agents, including gonadal, thyroid and pituitary hormones; in addition there is a rich autonomic innervation and many neuropeptides have been identified. The proposed functions of the gland are remarkably diverse and include the gland being (1) a source of 'saliva', (2) a site of immune response, (3) a photoprotective organ, (4) part of a retinal-pineal axis, (5) a source of pheromones, (6) a source of thermoregulatory lipids, (7) a site of osmoregulation, and (8) a source of growth factors. The gland is discussed in terms of its embryology and phylogeny, and in relation to ecological variables. Several goals of future research are identified. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 36 Fig. 37 Fig. 38 Fig. 40 PMID:7559104

  4. The umbilical and paraumbilical veins of man.

    PubMed Central

    Martin, B F; Tudor, R G

    1980-01-01

    During its transit through the umbilicus structural changes occur in the thick wall of the extra-abdominal segment of the umbilical vein whereby the components of the intra-abdominal segment acquire an essentially longitudinal direction and become arranged in fibro-elastic and fibro-muscular zones. The vein lumen becomes largely obliterated by asymmetrical proliferation of loose subendothelial conective tissue. The latter forms a new inner zone within which a small segment of the lumen persists in an eccentric position. This residual lumen transmits blood to the portal system from paraumbilical and systemic sources, and is retained in the upper part of the vein, even in old age. A similar process of lumen closure is observed in the ductus venosus. In early childhood the lower third of the vein undergoes breakdown, with fatty infiltration, resulting in its complete division into vascular fibro-elastic strands, and in old age some breakdown occurs in the outermost part of the wall of the upper two thirds. The paraumbilical veins are thick-walled and of similar structure to the umbilical vein. Together they constitute an accessory portal system which is confined between the layers of the falciform ligament and is in communication with the veins of the ventral abdominal wall. The constituents form an ascending series, namely, Burow's veins, the umbilical vein, and Sappey's inferior and superior veins. The main channel of Sappey's inferior veins may be the remnant of the right umbilical vein since it communicates with the right rectus sheath and often communicates directly with the portal system within the right lobe of the liver. The results are of significance in relation to clinical usage of the umbilical vein. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 PMID:7400038

  5. Ultrastructural aspects of oocyte growth in the marsupial Monodelphis domestica (grey short-tailed opossum).

    PubMed Central

    Falconnier, C; Kress, A

    1992-01-01

    involves the incorporation of endocytotic vesicles and the coalescence of larger vesicles. Ordinary fixation procedure leave the vesicles empty. Cortical granules are found only in small numbers. Images Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 PMID:1304586

  6. Tissue Localization of Australia Antigen Immune Complexes in Acute and Chronic Hepatitis and Liver Cirrhosis

    PubMed Central

    Nowosławski, Adam; Krawczyński, Krzysztof; Brzosko, Witold J.; Madaliński, Kazimierz

    1972-01-01

    membraneous glomerulonephritis, panarteritis and simple arteriolar hyalinosis were found at sites of localization of these deposits. ImagesFig 21Fig 22Fig 23Fig 24Fig 1Fig 2Fig 3Fig 4Fig 5Fig 6Fig 25Fig 26Fig 27Fig 28Fig 29Fig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 13Fig 14Fig 15Fig 16Fig 17Fig 18Fig 19Fig 20 PMID:4628111

  7. Comparative studies on the distribution of binucleate cells in the placentae of the deer and cow using the monoclonal antibody, SBU-3.

    PubMed Central

    Lee, C S; Gogolin-Ewens, K; Brandon, M R

    1986-01-01

    , granule transfer seems to be the primary function of binucleate cell migration. The histological classification of the mature placenta of the deer and the cow is epitheliochorial. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:3693070

  8. Endemic syphilis in the Bakwena Reserve of the Bechuanaland Protectorate

    PubMed Central

    Murray, J. F.; Merriweather, A. M.; Freedman, M. L.

    1956-01-01

    A form of endemic syphilis exists in the Bakwena Reserve of the Bechuanaland Protectorate known by the local name of “dichuchwa”. It is similar to bejel, njovera and the endemic syphilis reported elsewhere in the world. The Government of the Protectorate, with the assistance of WHO and UNICEF, began in November 1953 a mass campaign in the Reserve to control this disease and, at the same time, to study its epidemiological, clinical, social and therapeutic aspects. The seropositivity rate in the Reserve was found to be 37%. Dichuchwa is a childhood and family disease, usually spread non-venereally. The early lesions are similar to secondary lesions of sporadic venereal syphilis, and are often followed by tertiary lesions affecting mainly the skin, nasopharynx and long bones. Primary lesions are rare but may occur under certain epidemiological conditions if the inoculum is sufficiently large; thus a mother may develop primary sores on the nipples through suckling an infected infant. Lesions of the cardiovascular and central nervous systems and congenital syphilis are also rare. Superinfection of an already infected and allergic host is probably the chief reason for the frequency of the tertiary lesions. Treatment of the disease with penicillin is very effective, and the authors believe that mass treatment of cases and contacts combined with an improvement in the standards of hygiene could eradicate the disease. ImagesFig. 61Fig. 62Fig. 63Fig. 64Fig. 74Fig. 75Fig. 76Fig. 1Fig. 2Fig. 3Fig. 16Fig. 17Fig. 18Fig. 43Fig. 44Fig. 45Fig. 7Fig. 8Fig. 9Fig. 13Fig. 14Fig. 15Fig. 31Fig. 32Fig. 33Fig. 50Fig. 51Fig. 52Fig. 53Fig. 54Fig. 55Fig. 56Fig. 34Fig. 35Fig. 36Fig. 46Fig. 47Fig. 48Fig. 49Fig. 22Fig. 23Fig. 24Fig. 10Fig. 11Fig. 12Fig. 57Fig. 58Fig. 59Fig. 60Fig. 65Fig. 66Fig. 67Fig. 19Fig. 20Fig. 21Fig. 4Fig. 5Fig. 6Fig. 68Fig. 69Fig. 70Fig. 71Fig. 72Fig. 73Fig. 37Fig. 38Fig. 39Fig. 28Fig. 29Fig. 30Fig. 25Fig. 26Fig. 27Fig. 40Fig. 41Fig. 42 PMID:13404470

  9. An Experimental Investigation of the Lymphatic System of the Teeth and Jaws

    PubMed Central

    MacGregor, Alexander

    1936-01-01

    are given, and the lines on which further experiments are being continued are indicated. Finally, the application of the results to the pathology of infection in this region, particularly paradontal disease, is given, and also their application to the phenomena of injection anæsthesia. ImagesFig. 18Fig. 19Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16Fig. 17 PMID:19990818

  10. Pacesetters of the American image or (a case for a pleasant diversion).

    PubMed Central

    Hook, E. W.

    1992-01-01

    Regardless of how you resolve the morality of our history, the fact is that Currier and Ives documented in their own special and often biased way the iconography of the growth and development of the United States of America (Fig. 88) in some of the most eventful years of its history from about 1840 through 1895. Now, as we near our 500th anniversary commemoration of Columbus' voyage to the Americas, it seems especially appropriate to review--to think about all of this. I think you have sensed, as we have gone along, that learning about Currier and his colleagues--these pacesetters of the American Image--has meant, as Osler predicted, a pleasant diversion for me. These activities have carried me into new areas of interest, expanding my perspective of the American Image--of people, of medicine, of life in general, and aiding in the identification of values, my own, as well as those of others. All along, my knowledge has been enhanced, especially of the history of this wonderful complex country of ours. Furthermore, and of considerable importance, this endeavor has sharpened my power of observation. I have, like a good doctor should do, learned to look better! Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 19 Fig. 18 Fig. 20 Fig. 21 Fig. 23 Fig. 25 Fig. 27 Fig. 26 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 39 Fig. 40 Fig. 41 Fig. 42 Fig. 43 Fig. 44 Fig. 45 Fig. 46 Fig. 47 Fig. 48 Fig. 49 Fig. 50 Fig. 51 Fig. 52 Fig. 53 Fig. 54 Fig. 55 Fig. 56 Fig. 57 Fig. 58 Fig. 59 Fig. 60 Fig. 61 Fig. 62 Fig. 63 Fig. 64 Fig. 65 Fig. 66 Fig. 68 Fig. 67 Fig. 69 Fig. 70 Fig. 71 Fig. 72 Fig. 73 Fig. 74 Fig. 75 Fig. 76 Fig. 77 Fig. 78 Fig. 79 Fig. 80 Fig. 82 Fig. 81 Fig. 83 Fig. 84 Fig. 85 Fig. 86 Fig. 87 Fig. 88 PMID:1413369

  11. Tumours of the urinary bladder

    PubMed Central

    Pamukcu, A. M.

    1974-01-01

    Tumours of the urinary bladder are uncommon in all domestic animals except cattle in certain regions. Where cattle eat bracken (Pteridium aquilinum) there is a high incidence of these tumours. Epithelial tumours are the most frequently encountered neoplasms in cattle and in dogs—the two species most studied. They are described under the following names: papilloma, adenoma, transitional cell carcinoma (with variants), squamous cell carcinoma, adenocarcinoma, and undifferentiated carcinoma. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Fig. 6Fig. 7Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 14Fig. 15Fig. 16 PMID:4371741

  12. Orthotics in Sports Shoes

    PubMed Central

    Schamberger, Wolf

    1983-01-01

    We are all born with a varying assortment of biomechanical discrepancies. Ordinarily these may be of no consequence, but to those who try to achieve excellence in a certain sport these discrepancies can spell the difference between success and failure. Some athletes may have to accept the fact that biomechanically the odds are against them ever becoming excellent and that intensive training may in fact be detrimental to their wellbeing. However, the majority can be helped with advice on proper shoe wear and orthotic correction. This article highlights the role of foot orthotics as indicated for various biomechanically-related problems commonly encountered in athletes. ImagesFig. 5Fig. 6Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Fig. 13Fig. 15Fig. 16Fig. 18Fig. 19Fig. 20Fig. 21Fig. 22Fig. 23 PMID:21283401

  13. Intersexes in swine: a problem in descriptive anatomy.

    PubMed Central

    Halina, W G; Barrales, D W; Partlow, G D; Fisher, K R

    1984-01-01

    Accurate anatomical descriptions of ten intersex pigs were compiled through dissection and histological examination in order to identify specific groups of reproductive anomalies. Six different anatomical phenotypes were identified: four varieties of male pseudohermaphrodite, one type of female pseudohermaphrodite and one type of true hermaphrodite. The intersex phenomenon is complicated by the number of distinct anatomical phenotypes represented broadly by the term hermaphrodite. Therefore, accurate anatomical descriptions and precise terminology are prerequisites to defining the etiology of hermaphroditism and defining the modes of inheritance. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. PMID:6478301

  14. A maturation change detected in the semilunar cartilages with the scanning electron microscope.

    PubMed Central

    Moshurchak, E M; Ghadially, F N

    1978-01-01

    The surface of rabbit, cat, monkey and human semilunar cartilages was examined with the scanning electron microscope. A common feature was the occurrence of numerous ridges, undulations and furrows on the surface, but this was thought to be due to marked shrinkage and distortion of cartilage not firmly attached to bone. Humps were seen on the semilunar cartilages of young animals, but pits occurred in adults. This is thought to reflect a maturation change. Humps were seen in a young human semilunar cartilage, but pits were not seen in adult specimens. It is not clear whether pits are truly absent or just masked by the severe ridging produced during the preparation of large human specimens. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 PMID:99411

  15. Observations on the source of embryonic myocardioblasts.

    PubMed Central

    Morris, E W

    1976-01-01

    The light and electron microscopic appearance of mesenchymal and myoblastic tissue in the embryonic heart is described. The similarity in the morphological appearance of all mesenchymal cells is pointed out, whether they occur in atrioventricular cushion tissue, the ridge tissue of the bulbus, cordis, sub-epicardial tissue or in mesenchyme elsewhere in the embryo. Cells intermediate in their ultrastructure between mesenchymal cells and myoblasts are found. The significance of such cells is discussed and the suggestion made that their appearance is consistent with their representing stages in the differentiation of mesenchymal cells into myoblasts. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 PMID:1254531

  16. Esterase profile of human masseter muscle.

    PubMed Central

    Kirkeby, S; Moe, D; Vilmann, H

    1988-01-01

    The esterase profile of fresh human masseter muscle was investigated by use of histochemistry and electrophoresis. The histochemical methods included reactions for alpha-naphthyl esterase, myofibrillar ATPase, reverse myofibrillar ATPase and succinic dehydrogenase. In frozen sections of the muscle the coloured reaction product for esterases was present both as a diffuse sarcoplasmic coloration and as distinct granules. The intensity of diffuse reaction was used to classify the muscle fibres as strongly, moderately and weakly reacting. The fibres with strong esterase activity belonged to Type I and iiC. iM and Type II A fibres showed a moderate esterase reaction and Type II B fibres had a low activity. The electrophoretic gels stained for esterase activity showed that the human masseter muscle possesses a slow migrating double band with high enzyme activity and a cascade of faster migrating isoenzymes. In isoelectric focused gels the major esterases showed isoelectric points around pH 5. Images Fig. 1 Fig. 2 Figs. 3-5 Figs. 6-8 Figs. 9-11 Figs. 12-14 Figs. 15-16 Fig. 17 PMID:3198486

  17. Paraquat Poisoning—Lung Transplantation

    PubMed Central

    Matthew, Henry; Logan, Andrew; Woodruff, M. F. A.; Heard, Brian

    1968-01-01

    A 15-year-old boy ingested a mouthful of paraquat and developed severe respiratory distress. Treatment included the transplantation of one lung, but subsequently changes developed in the graft which are thought to have been due to paraquat, and the patient died two weeks after the operation The dangers of keeping poisonous substances in incorrectly labelled bottles has once again been demonstrated, while the pattern of paraquat poisoning, especially the development of proliferative alveolitis and terminal bronchiolitis, is confirmed. Immediate forced diuresis followed by haemodialysis is necessary to remove paraquat, thereby perhaps avoiding initiation of the changes in the lungs. The technical feasibility of human lung transplantation has again been demonstrated. It has also been shown that infection does not necessarily pose an insuperable problem, at any rate if, as in the case described, there was no preoperative pulmonary infection in either recipient or donor. ImagesFig. 1Fig. 1Fig. 2Fig. 3Fig. 4Fig. 5-8Fig. 9-12Fig. 13Fig. 14Fig. 15-16Fig. 16 PMID:4877735

  18. Regional Enteritis of the Duodenum

    PubMed Central

    Edwards, A. M.; Michalyshyn, B.; Sherbaniuk, R. W.; Costopoulos, L. B.

    1965-01-01

    Forty-three cases of regional enteritis of the duodenum were found in the world literature. Regional duodenitis is relatively uncommon; in one large series of 600 cases of regional enteritis only three involved the duodenum. At the University of Alberta Hospital, in a three-year period (1962 to 1965), the authors encountered five patients with regional duodenitis, demonstrating a spectrum of clinical, radiologic and pathologic characteristics of this disease. The description of these patients brings the world's total to 48 reported cases. Two of these patients had symptoms of severe duodenal obstruction and were relieved by bypass procedures and vagotomy; one required surgery because of co-existent obstructive ileal disease: and two patients have improved on corticoids and salicylazosulfapyridine without surgery. In our experience treatment with corticoids and salicylazosulfapyridine is beneficial. Four of the five patients remain in a state of mild to moderate nutritional impairment and have evidence of intestinal malabsorption. In the fifth case the period of followup is too short to permit assessment. ImagesFig. 1Fig. 2Fig. 3Fig. 4Fig. 5Figs. 6 (X 50) and 7 (X 450)Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12Figs. 13 and 14 (both X 100)Fig. 15Fig. 16Fig. 17Fig. 18Fig. 19Fig. 20Fig. 21 PMID:5843869

  19. Mammary-carcinoma cells in mouse liver: infiltration of liver tissue and interaction with Kupffer cells.

    PubMed Central

    Roos, E.; Dingemans, K. P.; Van de Pavert, I. V.; Van den Bergh-Weerman, M. A.

    1978-01-01

    Interactions between TA3 mammary-carcinoma cells and liver cells were studied with the electron microscope in mouse livers that had been perfused with a defined medium containing the tumour cells. Infiltration of liver tissue by the TA3 cells proceeded in the following steps. First, numerous small protrusions were extended through endothelial cells and into hepatocytes. Next, some cells had larger processes deeply indenting hepatocytes. Finally a few tumour cells became located outside the blood vessels. Two variant cell lines, TA3/Ha and TA3/St, differing in cell coat and surface charge, did not differ in the extent of infiltration. TA3/Ha cells were often encircled by thin processes of liver macrophages (Kupffer cells). Encircled cells were initially intact, but later some of them degenerated. These observations suggest that TA3/Ha cells were phagocytized by the Kupffer cells. Encirclement appeared to be inhibited after only 30 min, when many cells were still partly surrounded. Encirclement of TA3/St was much less frequent. After injection of tumour cells intra-portally in vivo, similar results were obtained, which demonstrated the validity of the perfused liver model. TA3/Ha cells formed much fewer tumour nodules in the liver than TA3/St cells. Images Fig. 7 Fig. 8 Fig. 9 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 11 Fig. 12 Fig. 13 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:687522

  20. A Novel Method of Natural Cryoprotection 1

    PubMed Central

    Hirsh, Allen G.; Williams, Robert J.; Meryman, Harold T.

    1985-01-01

    Correlating measurements from differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and survival of twigs after two-step cooling experiments, we provide strong evidence that winter-hardened Populus balsamifera v. virginiana (Sarg.) resists the stresses of freezing below −28°C by amorphous solidification (glass formation) of most of its intracellular contents during slow cooling (≤5°C per hour). It is shown that other components of the intracellular medium go through glass transitions during slow cooling at about −45°C and below −70°C. This `three glass' model was then used to predict the results of differential scanning calorimetry, freeze-fracture freeze-etch electron microscopy, and biological experiments. This model is the first definitive explanation for the resistance of a woody plant to liquid N2 temperatures even if quench cooling (1200°C per minute) begins at temperatures as high as −20°C and warming is very slow (≤5°C per hour). It is also the first time high temperature natural intracellular glass formation has been demonstrated. Images Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:16664400

  1. A military surgical team in Belfast.

    PubMed Central

    Boyd, N. A.

    1975-01-01

    This paper details the experiences of a military surgical team in Belfast from 1972 to early 1974. The overall picture of the problem is given and the current management of 'war' injuries discussed. Up to February 1974 over 1000 servicemen have been injured in Northern Ireland as a result of the vivil disturbance. Over 200 have died. Because of the close proximity of the hospital to many battle areas, casualties may arrive with massive injuries, requiring major resuscitation. Limb wounds have predominated. There is no short cut to adequate wound debridement, especially in the surgery of high-velocity missile injury. Missile wounds of the large bowel require a colostomy. Formal thoracotomy is increasingly used for the through-and-through gunshot wounds of the chest. Controlled ventilation is playing an increasingly important role in the management of some missile wounds of the head. Mine and bomb explosions frequently cause multiple injuries, requiring extensive surgery on any one patient. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 14 Fig. 15 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 16 PMID:238456

  2. Strongylus edentatus: development and lesions from ten weeks postinfection to patency.

    PubMed Central

    McCraw, B M; Slocombe, J O

    1978-01-01

    Pony foals inoculated with infective Strongylus edentatus larvae were examined at necropsy from ten to 72 weeks postinfection. At ten weeks postinfection larvae were visible retroperitoneally in the liver and flanks and were recovered from the ligaments of the liver. The fourth molt was detected at 16 weeks postinfection and larvae were also recovered from the wall of the cecum at this time. By 40 weeks adult S. edentatus containing eggs were found in the contents of the cecum and colon. While many larvae migrate to remote parts of the body, it is likely that only those that attain the base of the cecum are successful in establishing in the cecum and colon as adult forms. By 36 weeks postinfection no larvae were found in the liver and up to this time none were found in the peritoneal cavity. Larvae were not recovered from the parenchyma of the lungs. Adhesions and disruption of omental architecture were frequent changes observed throughout infection. Casts of necrotic eosinophils enclosing tracks and larvae were observed beneath the intima of major veins of the cecum and colon. The liver was rough and the capsule thickened at 16 and 20 weeks postinfection and the flanks remained edematous until 36 weeks postinfection. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. PMID:688075

  3. Effect of a Transient Period of Ischemia on Myocardial Cells

    PubMed Central

    Kloner, Robert A.; Ganote, Charles E.; Whalen, Daniel A.; Jennings, Robert B.

    1974-01-01

    Changes produced in the posterior papillary muscle of the dog following 40 minutes of circumflex artery occlusion and 0 to 20 minutes of blood reflow were studied by electron miroscopy. With no reflow of blood, myocardial cells were modestly swollen, contained amorphous matrix densities in the mitochondria, had aggregation and margination of nuclear chromatin and relaxation of myofibrils. With as little as 2 minutes of blood reflow, cells developed contraction bands and were greatly swollen due to a generalized increase in sarcoplasmic space, formation of vacuoles and swelling of mitochondria. Frequently, cell membranes were lifted away from the myofibers, forming large subsarcolemmal blebs which appeared capable of compressing adjacent capillaries. The extracellular space did not appear to be enlarged, and the marked tissue edema found after reflow was due primarily to accumulation of intracellular fluid. In addition to explosive cell swelling, there was, over the 2- to 20-minute period of reflow, a progressive increase in size and number of granular mitochondrial dense bodies of the calcium accumulation type. No significant changes in lysosomes were observed. The speed with which the morphologic changes developed during very early reflow periods suggests that irreversible ischemic injury produces a defect in cell volume regulation during the phase of ischemia and that this defect becomes manifest if arterial flow is restored to the affected cells. ImagesFig 7Fig 8Fig 9Fig 10Fig 11Fig 12Fig 13Fig 14Fig 15Fig 1Fig 2Fig 3Fig 4Fig 5Fig 6 PMID:4814895

  4. The Nature of D-Serine-Induced Nephrotoxicity

    PubMed Central

    Ganote, Charles E.; Peterson, Darryl R.; Carone, Frank A.

    1974-01-01

    Renal structural changes were studied sequentially between 1 hour and 6 days in rats treated with D-serine. Extensive necrosis of proximal straight tubules was rapid in onset and was followed by complete tubular regeneration 6 days post-treatment. The apparent progression of cellular changes was initial shrinkage, followed either by swelling and loss of apical cytoplasm or immediate lysis of cytoplasmic and nuclear contents. Tubular damage left only the basement membrane as a barrier between interstitial and luminal fluids. In similarly treated rats, proteinuria and glucosuria developed at the onset of tubular necrosis and disappeared when the tubules were completely relined by epithelium suggesting that they are due to diffusion of protein and glucose from interstitium into tubular fluid across the denuded basement membranes and that epithelial cells, under normal conditions, act as a barrier to diffusion of certain substances between the interstitium and tubular fluid. ImagesFig 10Fig 11Fig 1Fig 2Fig 3Fig 12Fig 13Fig 14Fig 15Fig 4Fig 5Fig 6Fig 7Fig 8Fig 9 PMID:4447130

  5. Postoperative Peritoneal Adhesions

    PubMed Central

    Ryan, Graeme B.; Grobéty, Jocelyne; Majno, Guido

    1971-01-01

    This paper describes an experimental model of peritoneal adhesions, in the rat, based on two relatively minor accidents that may occur during abdominal surgery in man: drying of the serosa, and bleeding. Drying alone had little effect; drying plus bleeding consistently produced adhesions to the dried area. Fresh blood alone produced adhesions between the three membranous structures [omentum and pelvic fat bodies (PFBs)]. The formation of persistent adhesions required whole blood. Preformed clots above a critical size induced adhesions even without previous serosal injury; they were usually captured by the omentum and PFBs. If all three membranous structures were excised, the clots caused visceral adhesions. The protective role of the omentum, its structure, and the mechanism of omental adhesions, are discussed. These findings are relevant to the pathogenesis of post-operative adhesions in man. ImagesFig 3Fig 4Fig 5Fig 6Fig 7Fig 12Fig 13Fig 1Fig 2Fig 14Fig 15Fig 8Fig 9Fig 10Fig 11 PMID:5315369

  6. The fine structure of proliferating cartilage cells: structural changes in an experimental model.

    PubMed Central

    Scheck, M; Parker, J; Sakovich, L

    1975-01-01

    Extensive development of the rough endoplasmic reticulum and comparatively less developed Golgi membranes were seen in the cells of chondrocyte clusters which had formed in the vicinity of cartilage defects produced by intra-articular papain and cortisone injections. These cells frequently showed myelin-like membranous figures. These figures were seen either close to the cell membrane, or between cells, or connected to the nuclear envelope or the endoplasmic reticulum. The hypothesis is advanced that the myelin figures are made from redundant material which was not used for membrane formation. Cortisone, which is known to interfere with mitochondrial function and general metabolic processes, could have been responsible for the deficiency in membrane differentiation and transfer. This investigation was supported by grants from the Orthopaedic Research and Education Foundation and from the Research Evaluation and Allocation Committee of the School of Medicine, Univeristy of California, San Francisco. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figs. 7, 8 and 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Figs. 16 and 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31 Fig. 32 Fig. 33 Fig. 34 Fig. 35 PMID:1141047

  7. The ultrastructure of eosinophil granules of the black-necked crowned crane.

    PubMed Central

    Maxwell, M H

    1979-01-01

    The fine structure of the granules of circulating eosinophil leucocytes was studied in five adult black-necked crowned cranes. The interna within these granules showed various crystalline arrangements. Optical diffraction patterns of the crystals revealed linear arrangements measuring 6.2 and 3.8 nm and often, when these arrangements were superimposed, a hexagonal pattern was observed. Bundles of microfilaments measuring 5-7 nm in diameter were found frequently in crystal-containing granules. Staining with phosphotungstic acid (PTA) and various other cytochemical procedures gave results similar to those obtained previously in the shag and the duck. The PTA stain and peroxidase reaction product were found only in the externum of the granules whereas the acid hydrolases, acid phosphatase and arylsulphatase were located within the crystalline matrix and in or between the microfilaments. As with shag eosinophil granules, those of the crane did not appear to contain histone arginine and in this respect they differed from those of the duck and the fowl. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 PMID:422484

  8. The vomeronasal organ of the rat.

    PubMed Central

    Vaccarezza, O L; Sepich, L N; Tramezzani, J H

    1981-01-01

    The anatomical organization of the vomeronasal complex of the rat (vomeronasal organ blood vessels, cartilage and glands) and the structure of the vomeronasal organ were studied. This organ is a tubular formation that shows different characteristics along its longitudinal axis. In its rostral portion it has a lateral flattened shape but caudally the organ acquires a typical crescent shape and a greater size. The organ is rotated along its longitudinal axis, the medial wall becoming inferior and the lateral one, superior. In its most caudal portion the organ decreases in size and ends in glandular branches. Three histological segments were recognized in the vomeronasal organ. The rostral one shows a pseudostratified epithelium surrounding all the lumen. The middle segment presents in one of its walls a similar epithelium and, in the other wall, the vomeronasal epithelium. The caudalmost segment shows a simple columnar epithelium that continues with that of glandular ducts. The vomeronasal epithelial border is formed by three types of cellular processes which intermingle, each one showing particular features: (a) microvilli originating from dendrites of bipolar cells; (b) microvilli from supporting cells and (c) micro-processes of undetermined origin. The surface of the vomeronasal epithelium shows an irregular distribution and arrangement of these processes. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Figs. 11-12 Fig. 13 Figs. 14-15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 PMID:7275797

  9. Palatal process movement in the rat as demonstrated in frozen sections.

    PubMed Central

    Diewert, V M; Tait, B

    1979-01-01

    maxillary width, contributed to the medial movement of the processes above the tongue. Images Figs. 1-15 Fig. 16 Fig. 17 Figs. 18-22 PMID:381268

  10. Quantitative studies of the regeneration of rat myelinated nerve fibres: variations in the number and size of regenerating fibres after repeated localized freezings.

    PubMed Central

    Mira, J C

    1979-01-01

    The number and size of myelinated nerve fibres were determined in the nerve to the medial head of the gastrocnemius muscles of rats whose left sciatic nerve was repeatedly frozen (one to five times at three weekly intervals). The contralateral nerve was used as a control. Results varied according to the number of freezings performed and, for a given number of freezings, according to the period of regeneration. When measurements were completed 1 month after the last of several localized freezings, the number of regenerating myelinated nerve fibres increased regularly up to the third freezing, reaching to about 220% of the control value, but no higher values were recorded after four or five freezings. The nerve fibre distribution was unimodal in all the nerves studied. The mean diameter of all myelinated fibres decreased with the number of freezings from 50% of the control value after the first to 36% after the fifth. When measurements were made 1, 3, 6, 12 and 18 months after the third and final freezing, the number of regenerating myelinated nerve fibres decreased by about 30% between the first and third month and then stabilized at 190% of the control value. Nerve fibre distribution became bimodal from the third month onwards, and the mean diameter of all myelinated fibres increased regularly. However, by the eighteenth month, the size of regenerated myelinated nerve fibres had only reached 70% of the normal contralateral value. Images Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 15 Fig. 16 Fig. 17 Fig. 18 PMID:511774

  11. Comparative anatomy of the vomeronasal organ complex in bats.

    PubMed Central

    Cooper, J G; Bhatnagar, K P

    1976-01-01

    The morphology of the vomeronasal organ complex was histologically described in eight out of fourteen chiropteran species investigated. Of the six families examined, all except the family Pteropodidae (suborder Megachiroptera) were found to have at least one member possessing the organ. The organ is best developed in phyllostomatids. It is absent in vespertilionids (including a Myotis embryo) except in Miniopterus. An accessory olfactory bulb is reported for the first time in the latter. The organ is described for the first time in Rhinopoma, Megaderma, and Hipposideros. The organ in Rhinolophus is also described. Homologous anterior nasal cartilages and patent nasopalatine ducts are present in all species. The organ occupies the anterior ventral nasal septum region. In Megaderma and Hipposideros it is level with the nasal cavity floor. Areas of epithelium similar to olfactory epithelium have been observed in some organs. Epithelia, vascular sinuses, vomeronasal nerves, paravomeronasal ganglia, accessory olfactory bulbs, and vomeronasal glands have been investigated. In bats with regressed or rudimentary organs (Megaderma, Rhinopoma, Rhinolophus, Hipposideros) accessory olfactory bulbs could not be identified. Thus, presence of the organ does not necessarily indicate presence of the accessory olfactory bulb. Septal pockets located superior to the organ complex and lined with pseudostratified columnar epithelium are described in Hipposideros and may play a part in nasophonation. A unique role is proposed for the organ in the feeding behaviour of Desmodus. The desirability of extending the useful terms 'diosmatic' and 'monosmatic' to all vertebrates in reference to their respective possession or lack of the vomeronasal organ is suggested. Images Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Figs. 12-15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Figs. 21-23 PMID:1010789

  12. Strongylus equinus: development and pathological effects in the equine host.

    PubMed Central

    McCraw, B M; Slocombe, J O

    1985-01-01

    The development and pathological effects of Strongylus equinus were studied in 17 pony foals and one horse foal raised in isolation and examined at necropsy from seven days to 40 wk postinfection (PI). Following inoculation of 15000 +/- 6% or 16000 +/- 6% infective larvae by stomach tube foals were monitored for clinical signs and selected blood changes. Larvae penetrated the wall of the ileum, cecum and colon. The molt to the fourth stage occurred mostly in the wall of the ventral colon before 2 wk PI and larvae attained the liver mainly via the peritoneal cavity as early as eight days PI and persisted in the liver until 17 wk PI. Following active migration within the liver, invasion of the pancreas was accomplished at least by 7 wk PI with maximum numbers at 17 wk. The fourth molt occurred about 15 wk PI and preadults were present in the wall of the ventral colon at 30 wk PI and in the lumen of the colon at 40 wk. Strongylus equinus tends to wander retroperitoneally to the flanks, perirenal fat, diaphragm, omentum and occasionally to the lungs. Between 1 and 4 wk PI small raised hemorrhagic areas were present on the serosa of the ileum and colon. Small white foci on the surface of the liver at 1 wk PI were followed by tortuous tracks 3 wk later. Pathological changes in the pancreas were evident at three months PI and more severe by four months. Granulomas containing larvae were common in the flanks, diaphragm, omentum and occasionally beneath the pleura of the lungs. Clinical signs were correlated with invasion of the pancreas, the fourth molt, maximum globulin values and high eosinophil counts. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. Fig. 11. Fig. 12. Fig. 13. Fig. 14. Fig. 15. Fig. 16. PMID:4075237

  13. Structural differentiation of the male genital ducts of the echidna (Tachyglossus aculeatus).

    PubMed Central

    Djakiew, D; Jones, R C

    1981-01-01

    Seven ductuli efferentes radiate from the testis of the echidna and join the ductus epididymidis either directly or after joining one of their neighbours. They are pigmented brown and appear to be structurally and functionally similar to the ductuli efferentes of therian mammals. The epididymis is anatomically differentiated into a large head and small tail which appear to be, respectively, larger and smaller than the similar regions of the epididymis of scrotal mammals; they also contain, respectively, larger and smaller proportions of the animals' extragonadal spermatozoa. Only the head of the epididymis is adjacent to the testis: the tail and the ductus deferens are distal to the testis. The ductus epididymis is also histologically differentiated into two segments (initial and terminal segments) which correspond precisely with the anatomical differentiation. The initial segment is structurally similar to the initial segment of the epididymis of scrotal mammals (i.e. tall epithelium with long stereocilia, a farily homogeneous supranuclear cytoplasma containing Golgi apparatus and a low concentration of spermatozoa in the lumen). The terminal segment has adaptations of the duct (as in scrotal mammals) for the storage of spermatozoa such as a wide lumen containing a high concentration of spermatozoa, low epithelium and thick layers of periductal muscle. However, it is peculiar in that the duct epithelium is thrown into folds and it is involved in considerable apocrine secretion. Images Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Figs. 16-19 Fig. 20 Fig. 21 Fig. 22 Figs. 23-24 PMID:7275798

  14. Identification of Membrane Protein Associated with Sucrose Transport Into Cells of Developing Soybean Cotyledons 1

    PubMed Central

    Ripp, Kevin G.; Viitanen, Paul V.; Hitz, William D.; Franceschi, Vincent R.

    1988-01-01

    Fig. 15 Fig. 16 PMID:16666479

  15. Hydroxyalkyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals

    DOEpatents

    Katti, K.V.; Singh, P.R.; Reddy, V.S.; Katti, K.K.; Volkert, W.A.; Ketring, A.R.

    1999-03-02

    This research discloses a compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises a functionalized hydroxyalkyl phosphine ligand and a metal combined with the ligand. 16 figs.

  16. Stabilized polyacrylic saccharide protein conjugates

    DOEpatents

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1996-02-20

    This invention is directed to water soluble protein polymer conjugates which are stable in hostile environments. The conjugate comprises a protein which is linked to an acrylic polymer at multiple points through saccharide linker groups. 16 figs.

  17. Experimental determination of the effective Taylor dispersivity in a fracture

    SciTech Connect

    Gilardi, J.R.

    1984-06-01

    The applicability and accuracy of the approximation for Taylor Dispersion was experimentally determined for the diffusion of a chemical tracer in flow through a fracture. 12 refs., 16 figs., 10 tabs. (ACR)

  18. Anomalous positrons from heavy ion collisions: Past results and future plans

    SciTech Connect

    Betts, R.R.

    1989-01-01

    The current status of the experimental study of anomalous lines observed in the spectra of positrons produced in heavy ion collisions is reviewed. A new experiment to measure positron-electron coincidences is discussed. 26 refs., 14 figs., 2 tabs.

  19. Method for replicating an array of nucleic acid probes

    DOEpatents

    Cantor, C.R.; Przetakiewicz, M.; Smith, C.L.; Sano, T.

    1998-08-18

    The invention relates to the replication of probe arrays and methods for replicating arrays of probes which are useful for the large scale manufacture of diagnostic aids used to screen biological samples for specific target sequences. Arrays created using PCR technology may comprise probes with 5{prime}- and/or 3{prime}-overhangs. 16 figs.

  20. Electric sales and revenue 1996

    SciTech Connect

    1997-12-01

    Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1996. 16 figs., 20 tabs.

  1. Lightning: Understanding it and protecting systems from its effects

    SciTech Connect

    Hasbrouck, R.T.

    1989-04-10

    This tutorial will raise the reader's level of lightning consciousness by providing an overview of the atmospheric electrification process and by discussing the development and characteristics of a lightning discharge. Next, techniques and instrumentation for lightning threat warning, detection and tracking will be presented. Finally, the principles of protection will be discussed, along with several methods for testing that protection. 15 refs., 16 figs.

  2. Geothermal energy program summary

    SciTech Connect

    Not Available

    1990-01-01

    This document reviews Geothermal Energy Technology and the steps necessary to place it into service. Specific topics covered are: four types of geothermal resources; putting the resource to work; power generation; FY 1989 accomplishments; hard rock penetration; conversion technology; and geopressured brine research. 16 figs. (FSD)

  3. Lanthanide Al-Ni base Ericsson cycle magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-10-31

    A magnetic refrigerant for a magnetic refrigerator using the Ericsson thermodynamic cycle comprises DyAlNi and (Gd{sub 0.54}Er{sub 0.46})AlNi alloys having a relatively constant {Delta}Tmc over a wide temperature range. 16 figs.

  4. Highly oxidized superconductors

    DOEpatents

    Morris, D.E.

    1994-09-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known synthesis in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  5. Oligonucleoside alkyl or arylphosphonate derivatives capable of crosslinking with or cleaving nucleic acids

    DOEpatents

    Miller, P.S.; Ts'o, P.O.P.

    1999-06-15

    A composition for inactivating a target nucleic acid which comprises an oligonucleoside alkyl or arylphosphonate analogue which is complementary to the sequence of the target nucleic acid is provided. It includes a functional group which reacts with the target nucleic acid to render the target nucleic acid inactive or nonfunctional. 16 figs.

  6. Kits and methods of detection using cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.

    1998-04-14

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  7. Cellulose binding domain proteins

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.; Doi, R.

    1998-11-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  8. Methods of use of cellulose binding domain proteins

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1997-09-23

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  9. Cellulose binding domain fusion proteins

    DOEpatents

    Shoseyov, O.; Yosef, K.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1998-02-17

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 16 figs.

  10. Deep inelastic scaling in nuclear and particle physics

    SciTech Connect

    West, G.B.

    1988-01-01

    These lectures are intended to be a pedagogical introduction to some of the ideas and concepts concerning scaling phenomena which arise in nuclear and particle physics. Topics discussed are: classical scaling and dimensional analysis; non-relativistic treatment; dynamics and scaling; y-scaling; and relativistic treatment (QCD). 22 refs., 16 figs. (LSP)

  11. A summary of ground motion effects at SLAC (Stanford Linear Accelerator Center) resulting from the Oct 17th 1989 earthquake

    SciTech Connect

    Ruland, R.E.

    1990-08-01

    Ground motions resulting from the October 17th 1989 (Loma Prieta) earthquake are described and can be correlated with some geologic features of the SLAC site. Recent deformations of the linac are also related to slow motions observed over the past 20 years. Measured characteristics of the earthquake are listed. Some effects on machine components and detectors are noted. 18 refs., 16 figs.

  12. Method of producing highly oxidized superconductors containing barium, copper, and a third metal

    DOEpatents

    Morris, D.E.

    1996-02-20

    Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known syntheses in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

  13. Basic principles and mechanisms of selective oil agglomeration

    SciTech Connect

    Wheelock, T.D.; Drzymala, J.; Allen, R.W.; Hu, Y.C.; Tyson, D.; Ziaoping, Qiu, Lessa, A.

    1990-04-01

    The overall objective is to determine the basic principles and mechanisms which underlie a number of selective oil agglomeration processes that have been proposed for beneficiating fine-size coal. An understanding of the basic principles and mechanisms will greatly facilitate technical development and application of such processes to various types of coal. 5 refs., 16 figs., 2 tabs.

  14. Polymer surface treatment with particle beams

    DOEpatents

    Stinnett, R.W.; VanDevender, J.P.

    1999-05-04

    A polymer surface and near surface treatment process produced by irradiation with high energy particle beams is disclosed. The process is preferably implemented with pulsed ion beams. The process alters the chemical and mechanical properties of the polymer surface in a manner useful for a wide range of commercial applications. 16 figs.

  15. Tunability enhanced electromagnetic wiggler

    DOEpatents

    Schlueter, R.D.; Deis, G.A.

    1992-03-24

    The invention discloses a wiggler used in synchrotron radiation sources and free electron lasers, where each pole is surrounded by at least two electromagnetic coils. The electromagnetic coils are energized with different amounts of current to provide a wide tunable range of the on-axis magnetic flux density, while preventing magnetic saturation of the poles. 14 figs.

  16. Carolina bays of the Savannah River Plant

    SciTech Connect

    Schalles, J.F. ); Sharitz, R.R.; Gibbons, J.W.; Leversee, G.J.; Knox, J.N. )

    1989-01-01

    Much of the research to date on the Carolina bays of the Savannah River Plant and elsewhere has focused on certain species or on environmental features. Different levels of detail exist for different groups of organisms and reflect the diverse interests of previous investigators. This report summarizes aspects of research to date and presents data from numerous studies. 70 refs., 14 figs., 12 tabs.

  17. On the utility and ubiquity of atomic collision physics

    SciTech Connect

    Datz, S.

    1989-01-01

    This paper is divided into three parts. In the introduction, we discuss the history and makeup of ICPEAC. In the second part, we discuss the extent of applicability of atomic collision physics. In the third part, we chose one subject (dielectronic excitation) to show the interrelationship of various sub-branches of atomic collision physics. 28 refs., 14 figs.

  18. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  19. Multiple DC, single AC converter with a switched DC transformer

    DOEpatents

    Donnelly, M.K.; Hammerstrom, D.J.

    1997-05-20

    The invention is an improvement of the PASC inverter, wherein the improvements include the reduction from two shorting gates per transformer to one shorting gate per transformer and replacement of active control of the shorting gate with passive control of the shorting gate. Further advantages are obtained through the use of anti-parallel gate sets. 14 figs.

  20. Restoration of normal phenotype in cancer cells

    DOEpatents

    Bissell, M.J.; Weaver, V.M.

    1998-12-08

    A method for reversing expression of malignant phenotype in cancer cells is described. The method comprises applying {beta}{sub 1} integrin function-blocking antibody to the cells. The method can be used to assess the progress of cancer therapy. Human breast epithelial cells were shown to be particularly responsive. 14 figs.

  1. Advanced synchronous luminescence system

    DOEpatents

    Vo-Dinh, T.

    1997-02-04

    A method and apparatus are disclosed for determining the condition of tissue or otherwise making chemical identifications includes exposing the sample to a light source, and using a synchronous luminescence system to produce a spectrum that can be analyzed for tissue condition. 14 figs.

  2. Three-dimensional rf structure calculations

    SciTech Connect

    Cooper, R.K.; Browman, M.J.; Weiland, T.

    1988-01-01

    The calculation of three-dimensional rf structures is rapidly approaching adolescence, after having been in its infancy for the last four years. This paper will show the kinds of calculations that are currently being performed in the frequency domain and is a companion paper to one in which time-domain calculations are described. 13 refs., 14 figs.

  3. Recent hypernuclear research at the Brookhaven AGS

    SciTech Connect

    Chrien, R.E.

    1985-01-01

    Recent AGS experiments contributing to our knowledge of hypernuclei are reviewed. These experiments have suggested new areas of research on hypernuclei. With the proper beam line facilities, the AGS will be able to perform experiments in these areas and provide a transition to the future era of ''kaon factories''. 20 refs., 14 figs.

  4. Electrocatalysts for oxygen electrodes. Final report

    SciTech Connect

    Yeager, E.

    1993-02-01

    Object was to understand factors controlling the activity of O{sub 2} reduction and generation electrocatalysts, in order to attain higher activity and longer-term stability. Two broad classes of catalysts were developed: transition metal macrocycles in monomeric and polymeric forms, and transition metal oxides including perovskites and pyrochlores. 20 refs., 14 figs.

  5. Triggering and data acquisition aspects of SSC tracking

    SciTech Connect

    Hanson, G.G.; Niczyporuk, B.B.; Palounek, A.P.T.

    1989-04-01

    Possible conceptual designs for wire chamber tracking systems which meet the requirements for radiation damage and rates in the SSC environment are discussed. Computer simulation studies of tracking in such systems are presented. Results of some preliminary pattern recognition studies are given. Implications for data acquisition and triggering are examined. 15 refs., 14 figs., 3 tabs.

  6. Low-loss, high-speed, high-{Tc} superconducting bearings

    DOEpatents

    Hull, J.R.; Mulcahy, T.M.; Uherka, K.L.

    1996-07-30

    A flywheel energy storage device is disclosed including an iron structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet. The stationary permanent magnet levitates the iron structure while the superconductor structure can stabilize and levitate the rotating iron structure. 15 figs.

  7. Low-loss, high-speed, high-{Tc} superconducting bearings

    DOEpatents

    Hull, J.R.; Mulcahy, T.M.; Uherka, K.L.

    1997-06-24

    A flywheel energy storage device is disclosed including an iron structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet. The stationary permanent magnet levitates the iron structure while the superconductor structure can stabilize the rotating iron structure. 15 figs.

  8. Numerical simulation of the decay of swirling flow in a constant volume engine simulator

    SciTech Connect

    Cloutman, L.D.

    1986-05-01

    The KIVA and COYOTE computer programs were used to simulate the decay of turbulent swirling flow in a constant-volume combustion bomb. The results are in satisfactory agreement with the measurement of both swirl velocity and temperature. Predictions of secondary flows and suggestions for future research also are presented. 14 refs., 15 figs.

  9. High temperature superconducting fault current limiter

    DOEpatents

    Hull, J.R.

    1997-02-04

    A fault current limiter for an electrical circuit is disclosed. The fault current limiter includes a high temperature superconductor in the electrical circuit. The high temperature superconductor is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter. 15 figs.

  10. Method for assessing motor insulation on operating motors

    DOEpatents

    Kueck, J.D.; Otaduy, P.J.

    1997-03-18

    A method for monitoring the condition of electrical-motor-driven devices is disclosed. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques. 15 figs.

  11. (New process modeling, design and control strategies for energy efficiency, high product quality and improved productivity in the process industries)

    SciTech Connect

    Not Available

    1991-01-01

    Highlights are reported of work to date on: resilient design and control of chemical reactors (polymerization, packed bed), operation of complex processing systems (compensators for multivariable systems with delays and Right Half Plane zeroes, process identification and controller design for multivariable systems, nonlinear systems control, distributed parameter systems), and computer-aided design software (CONSYD, POLYRED, expert systems). 15 figs, 54 refs. (DLC)

  12. [New process modeling, design and control strategies for energy efficiency, high product quality and improved productivity in the process industries

    SciTech Connect

    Not Available

    1991-12-31

    Highlights are reported of work to date on: resilient design and control of chemical reactors (polymerization, packed bed), operation of complex processing systems (compensators for multivariable systems with delays and Right Half Plane zeroes, process identification and controller design for multivariable systems, nonlinear systems control, distributed parameter systems), and computer-aided design software (CONSYD, POLYRED, expert systems). 15 figs, 54 refs. (DLC)

  13. Amorphous silicon ionizing particle detectors

    DOEpatents

    Street, R.A.; Mendez, V.P.; Kaplan, S.N.

    1988-11-15

    Amorphous silicon ionizing particle detectors having a hydrogenated amorphous silicon (a--Si:H) thin film deposited via plasma assisted chemical vapor deposition techniques are utilized to detect the presence, position and counting of high energy ionizing particles, such as electrons, x-rays, alpha particles, beta particles and gamma radiation. 15 figs.

  14. Electroproduction at large momentum transfers

    SciTech Connect

    van Bibber, K.

    1991-03-01

    The possibilities of electroproduction experiments at a facility such as the proposed European electron accelerator are discussed. Examples given are from studies of hadronization, color transparency, backward production, virtual Compton scattering and target spectator decay. Some conclusions about machine parameters are drawn. 25 refs., 15 figs.

  15. Nucleic acids encoding a cellulose binding domain

    DOEpatents

    Shoseyov, O.; Shpiegl, I.; Goldstein, M.A.; Doi, R.H.

    1996-03-05

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques. 15 figs.

  16. Split gland

    DOEpatents

    Petranto, J.J.

    1989-09-05

    A split gland having only three parts is described. The gland has substantially the same stability to the relative motion of the constituent half-gland members during the attachment process to a female fitting as have more complicated designs. Ease of manufacture and use result from the reduction in complexity of the present invention. 15 figs.

  17. Space nuclear safety program. Progress report, September 1984

    SciTech Connect

    George, T.G.

    1986-02-01

    This technical monthly report covers studies related to the use of /sup 238/PuO/sub 2/ in radioisotope power systems conducted for the Office of Special Nuclear Projects of the US Department of Energy by Los Alamos National Laboratory. Most of the studies discussed are ongoing; the results and conclusions described may change as the work progresses. 15 figs.

  18. Composite hydrogen separation element and module

    DOEpatents

    Edlund, D.J.

    1996-03-12

    There are disclosed improvements in multicomponent composite metal membranes useful for the separation of hydrogen, the improvements comprising the provision of a flexible porous intermediate layer between a support layer and a nonporous hydrogen-permeable coating metal layer, and the provision of a textured coating metal layer. 15 figs.

  19. Magnetically excited flexural plate wave apparatus

    DOEpatents

    Martin, S.J.; Butler, M.A.; Frye, G.C.; Smith, J.H.

    1998-11-17

    A non-piezoelectric flexural plate wave apparatus having meander-line transducers mounted on a non-piezoelectric membrane is disclosed. A static magnetic field is directed perpendicularly to the conductive legs of the transducers in the plane of the membrane. Single-port, two-port, resonant, non-resonant, eigenmode, and delay-line modes may be employed. 15 figs.

  20. Method and apparatus for monitoring mercury emissions

    DOEpatents

    Durham, M.D.; Schlager, R.J.; Sappey, A.D.; Sagan, F.J.; Marmaro, R.W.; Wilson, K.G.

    1997-10-21

    A mercury monitoring device that continuously monitors the total mercury concentration in a gas. The device uses the same chamber for converting speciated mercury into elemental mercury and for measurement of the mercury in the chamber by radiation absorption techniques. The interior of the chamber is resistant to the absorption of speciated and elemental mercury at the operating temperature of the chamber. 15 figs.

  1. The development of in vitro mutagenicity testing systems using T-lymphocytes

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  2. Load cell

    DOEpatents

    Spletzer, B.L.

    1998-12-15

    A load cell combines the outputs of a plurality of strain gauges to measure components of an applied load. Combination of strain gauge outputs allows measurement of any of six load components without requiring complex machining or mechanical linkages to isolate load components. An example six axis load cell produces six independent analog outputs, each directly proportional to one of the six general load components. 16 figs.

  3. Spatial dependence of the sheath power transmission factor in DIII-D

    SciTech Connect

    Futch, A.H.; Hill, D.N.; Porter, G.D. ); Matthews, G.F. ); Buchenauer, D. )

    1991-02-01

    The spatial dependence of the power transmission factor, d, associated with an ion-electron pair passing through the sheath at the DIII-D divertor plate has been determined by sweeping the edge plasma across Langmuir probe detectors. Our results show that d decreases from the classically expected value of eight near the low density edge of the scrape-off-layer plasma to values less than unity at the peak of the profile. 13 refs., 16 figs.

  4. Development of a methodology for defining whole-building energy design targets for commercial buildings: Phase 2, Development Concept Stage Report

    SciTech Connect

    McKay, H.N. ); Deringer, J.J. ); Jones, J.W. ); Hall, J.D. )

    1990-09-01

    This report documents eight tasks performed as part of the Whole-Building Energy Design Targets project, in which detailed conceptual approaches were produced for each element of the proposed Targets model. The eight task reports together describe the important modules proposed for inclusion in the Targets model: input module, energy module, characteristic development moduel, building cost module, analysis control module, energy cost module, search routines module, and economic analysis module. 16 refs., 16 figs., 5 tabs.

  5. Charge line quad pulser

    DOEpatents

    Booth, R.

    1996-10-08

    A quartet of parallel coupled planar triodes is removably mounted in a quadrahedron shaped PCB structure. Releasable brackets and flexible means attached to each triode socket make triode cathode and grid contact with respective conductive coatings on the PCB and a detachable cylindrical conductive element enclosing and contacting the triode anodes jointly permit quick and easy replacement of faulty triodes. By such orientation, the quad pulser can convert a relatively low and broad pulse into a very high and narrow pulse. 16 figs.

  6. Tracking simulation and wire chamber requirements for the SSC

    SciTech Connect

    Hanson, G.G.; Niczyporuk, B.B.; Palounek, A.P.T.

    1988-11-01

    Limitations placed on wire chambers by radiation damage and rate requirements in the SSC environment are reviewed. Possible conceptual designs for wire chamber tracking systems which meet these requirements are discussed. Computer simulation studies of tracking in such systems are presented. Simulations of events from interesting physics at the SSC, including hits from minimum bias background events, are examined. Results of some preliminary pattern recognition studies are given. 16 refs., 16 figs., 2 tabs.

  7. Apparatus and method for improving radiation coherence and reducing beam emittance

    DOEpatents

    Csonka, P.L.

    1992-05-12

    A method and apparatus for increasing the coherence and reducing the emittance of a beam-shaped pulse operates by splitting the pulse into multiple sub-beams, delaying the propagation of the various sub-beams by varying amounts, and then recombining the sub-beams by means of a rotating optical element to form a pulse of longer duration with improved transverse coherence. 16 figs.

  8. Shape memory alloy thaw sensors

    DOEpatents

    Shahinpoor, M.; Martinez, D.R.

    1998-04-07

    A sensor permanently indicates that it has been exposed to temperatures exceeding a critical temperature for a predetermined time period. An element of the sensor made from shape memory alloy changes shape when exposed, even temporarily, to temperatures above the austenitic temperature of the shape memory alloy. The shape change of the SMA element causes the sensor to change between two readily distinguishable states. 16 figs.

  9. The development of in vitro mutagenicity testing systems using T-lymphocytes. Research progress report, November 1, 1989--April 30, 1992

    SciTech Connect

    Albertini, R.J.

    1992-05-01

    This work has focused on the development of in vitro T-cell mutation assays. Conditions have been defined to measure the in vitro induction of mutations at the hypoxanthine-guanine phosphoribosyl transferase (hprt) locus in human T-lymphocytes. This assay is a parallel to our in vivo hprt assay, in that the same cells are utilized. However, the in vitro assay allows for carefully controlled dose response studies. 21 refs., 16 figs., 13 tabs.

  10. Environmental assessment related to the operation of Argonne National Laboratory, Argonne, Illinois

    SciTech Connect

    Not Available

    1982-08-01

    In order to evaluate the environmental impacts of Argonne National Laboratory (ANL) operations, this assessment includes a descriptive section which is intended to provide sufficient detail to allow the various impacts to be viewed in proper perspective. In particular, details are provided on site characteristics, current programs, characterization of the existing site environment, and in-place environmental monitoring programs. In addition, specific facilities and operations that could conceivably impact the environment are described at length. 77 refs., 16 figs., 47 tabs.

  11. Pulsed source ion implantation apparatus and method

    DOEpatents

    Leung, K.N.

    1996-09-24

    A new pulsed plasma-immersion ion-implantation apparatus that implants ions in large irregularly shaped objects to controllable depth without overheating the target, minimizing voltage breakdown, and using a constant electrical bias applied to the target. Instead of pulsing the voltage applied to the target, the plasma source, for example a tungsten filament or a RF antenna, is pulsed. Both electrically conducting and insulating targets can be implanted. 16 figs.

  12. Security system signal supervision

    SciTech Connect

    Chritton, M.R. ); Matter, J.C. )

    1991-09-01

    This purpose of this NUREG is to present technical information that should be useful to NRC licensees for understanding and applying line supervision techniques to security communication links. A review of security communication links is followed by detailed discussions of link physical protection and DC/AC static supervision and dynamic supervision techniques. Material is also presented on security for atmospheric transmission and video line supervision. A glossary of security communication line supervision terms is appended. 16 figs.

  13. Improved performance of the Boeing/LANL FEL (Free-Electron Laser) experiment: Extraction efficiency and cavity length detuning effects

    SciTech Connect

    Lumpkin, A.H.; Tokar, R.L. ); Dowell, D.H.; Lowrey, A.R.; Yeremian, A.D. ); Justice, R.E. )

    1989-01-01

    Significant improvement was observed in the performance of the Boeing/LANL Free-Electron Laser (FEL) experiment in the last year. Some of the more graphic demonstrations of this improved performance are presented in the time-resolved optical spectral measurements (streak/spectrometer) and the electron beam spectral measurements. Extraction efficiency of about 1/4% for the uniform wiggler and nearly 1% for the tapered wiggler experiment was obtained. 7 refs., 16 figs., 2 tabs.

  14. Pruning apparatus and method

    DOEpatents

    Dellinger, R.D.

    1997-12-09

    The present invention is an automated pruning apparatus that requires little or no follow-up hand pruning and requires no sensors to avoid supportive trunks or posts. The present invention uses at least one pair of flat, close angled toothed, counter rotating blades. Woody branches are directed to the counter rotating blades first with a lifting arm and secondly by a quilled drum. 16 figs.

  15. Quality function deployment as a mechanism for process characterization and control

    SciTech Connect

    Gillespie, L.K.

    1990-07-01

    This study was initiated to determine how well quality function deployment (QFD) was suited for process characterization. The process chosen on which to test QFD was the mechanical process of flat lapping (flat sanding) metal parts to a specified flatness or finish. This is the first use of QFD at this facility. It is the first example the authors have seen of its use for generic process characterization. It is normally used to define product needs. 13 refs., 16 figs., 5 tabs.

  16. Hanford internal dosimetry program manual

    SciTech Connect

    Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

    1989-10-01

    This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

  17. Potassium-oxygen interactions on a Ru(001) surface

    SciTech Connect

    Hrbek, J.; Shek, M.L.; Xu, G.Q. ); Sham, T.K. )

    1992-10-01

    The interaction of potassium with oxygen has been examined using synchrotron-based photoemission and NEXAFS, thermal desorption, work function measurements, and isotope exchange. Potassium coverages on Ru(001) surface ranging from monolayer to multilayer were investigated. Oxygen coadsorbed with potassium at 80 K forms a potassium-dioxygen complex, where both peroxide and superoxide ions were identified. The complex has high thermal stability on the Ru(001) surface, decomposing and desorbing at T > 900 K. 52 refs., 14 figs., 2 tabs.

  18. The performance of 3500 MWth homogeneous and heterogeneous metal fueled core designs

    SciTech Connect

    Turski, R.; Yang, Shi-tien

    1987-11-01

    Performance parameters are calculated for a representative 3500 MWth homogeneous and a heterogeneous metal fueled reactor design. The equilibrium cycle neutronic characteristics, safety coefficients, control system requirements, and control rod worths are evaluated. The thermal-hydraulic characteristics for both configurations are also compared. The heavy metal fuel loading requirements and neutronic performance characteristics are also evaluated for the uranium startup option. 14 refs., 14 figs., 20 tabs.

  19. Industrial applications of neutron diffraction

    SciTech Connect

    Felcher, G.P.

    1989-01-01

    Neutron diffraction (or, to be more general, neutron scattering) is a most versatile and universal tool, which has been widely employed to probe the structure, the dynamics and the magnetism of condensed matter. Traditionally used for fundamental research in solid state physics, this technique more recently has been applied to problems of immediate industrial interest, as illustrated in examples covering the main fields of endeavour. 14 refs., 14 figs.

  20. Planar triode pulser socket

    DOEpatents

    Booth, R.

    1994-10-25

    A planar triode is mounted in a PC board orifice by means of a U-shaped capacitor housing and anode contact yoke removably attached to cathode leg extensions passing through and soldered to the cathode side of the PC board by means of a PC cathode pad. A pliant/flexible contact attached to the orifice make triode grid contact with a grid pad on the grid side of the PC board, permitting quick and easy replacement of bad triodes. 14 figs.

  1. Distribution of sup 137 Cs, sup 90 Sr, sup 238 Pu, sup 239 Pu, sup 241 Am and sup 244 Cm in Pond B, Savannah River Site

    SciTech Connect

    Whicker, F.W. ); Pinder, J.E. III; Bowling, J.W. ); Alberts, J.J. . Marine Inst.); Brisbin, I.L. Jr. )

    1989-05-01

    The gradual senescence of present-day operating nuclear facilities, and resultant contamination of aquatic and terrestrial ecosystems, emphasize the importance of understanding the behavior of radionuclides in the environment. Observations and deductions concerning mechanisms of radionuclide transport can contribute significantly to knowledge of fundamental ecological processes. This study emphasized the ecosystem-level distribution of several long-lived radionuclides in an abandoned reactor cooling impoundment after a twenty year period of chemical and biological equilibration. 90 refs., 14 figs., 5 tabs.

  2. Laser damage database at 1064 nm

    SciTech Connect

    Rainer, F.; Gonzales, R.P.; Morgan, A.J.

    1990-03-01

    In conjunction with our diversification of laser damage testing capabilities, we have expanded upon a database of threshold measurements and parameter variations at 1064 nm. This includes all tests at low pulse-repetition frequencies (PRF) ranging from single shots to 120 Hz. These tests were conducted on the Reptile laser facility since 1987 and the Variable Pulse Laser (VPL) facility since 1988. Pulse durations ranged from 1 to 16 ns. 10 refs., 14 figs.

  3. Calculations of pair production by Monte Carlo methods

    SciTech Connect

    Bottcher, C.; Strayer, M.R.

    1991-01-01

    We describe some of the technical design issues associated with the production of particle-antiparticle pairs in very large accelerators. To answer these questions requires extensive calculation of Feynman diagrams, in effect multi-dimensional integrals, which we evaluate by Monte Carlo methods on a variety of supercomputers. We present some portable algorithms for generating random numbers on vector and parallel architecture machines. 12 refs., 14 figs.

  4. Multiplexed fluorescence detector system for capillary electrophoresis

    DOEpatents

    Yeung, E.S.; Taylor, J.A.

    1996-03-12

    A fluorescence detection system for capillary electrophoresis is provided wherein the detection system can simultaneously excite fluorescence and substantially simultaneously monitor separations in multiple capillaries. This multiplexing approach involves laser irradiation of a sample in a plurality of capillaries through optical fibers that are coupled individually with the capillaries. The array is imaged orthogonally through a microscope onto a charge-coupled device camera for signal analysis. 14 figs.

  5. The Yucca Mountain Project Prototype Testing Program; 1989 Status report

    SciTech Connect

    1989-10-01

    The Yucca Mountain Project is conducting a Prototype Testing Program to ensure that the Exploratory Shaft Facility (ESF) tests can be completed in the time available and to develop instruments, equipment, and procedures so the ESF tests can collect reliable and representative site characterization data. This report summarizes the prototype tests and their status and location and emphasizes prototype ESF and surface tests, which are required in the early stages of the ESF site characterization tests. 14 figs.

  6. Tumours of the liver and biliary system

    PubMed Central

    Ponomarkov, V.; Mackey, L. J.

    1976-01-01

    In this histological classification of liver and gall bladder tumours the tumour types largely correspond to those found in man. The most common tumours in this group are liver cell adenoma, hepatocellular carcinoma, and cholangiocarcinoma. ImagesFig. 5Fig. 6Fig. 7Fig. 8Fig. 13Fig. 14Fig. 1Fig. 2Fig. 3Fig. 4Fig. 9Fig. 10Fig. 11Fig. 12 PMID:1086149

  7. On the North Atlantic circulation

    SciTech Connect

    Schmitz, W.J. Jr.; McCartney, M.S. )

    1993-02-01

    A summary for North Atlantic circulation is proposed to replace the circulation scheme hypothesized by Worthington in 1976. Divergences from the previous model are in thermohaline circulation, cross-equatorical transport and Florida Current sources, flow in the eastern Atlantic, circulation in the Newfoundland Basin, slope water currents, and flow pattern near the Bahamas. The circulation patterns presented here are consistent with the majority of of published accounts of flow components. 77 refs., 14 figs., 3 tabs.

  8. Over-winter ecology of Oncorhynchus nerka in the Sawtooth Valley Lakes

    SciTech Connect

    Steinhart, G.B.; Wurtsbaugh, W.A.

    1996-05-01

    Included in this section of the report on limnology of Lakes in the Snake River Plain are descriptions of winter limnological conditions and kokanee growth characteristics from 1993 to 1995. The winter is usually a very harsh period for animals, and little is know about the over-winter ecology os sockeye salmon. They are active a temperatures below 4 F. The chapter discusses methods and results. 14 figs, 4 tabs.

  9. Skew and twist resistant hydrodynamic rotary shaft seal

    DOEpatents

    Dietle, L.; Kalsi, M.S.

    1999-02-23

    A hydrodynamically lubricated squeeze packing type rotary shaft seal suitable for lubricant retention and environmental exclusion which incorporates one or more resilient protuberances which cooperate with the gland walls to hold the seal straight in its installation groove in unpressurized and low pressure lubricant retention applications thereby preventing skew-induced wear caused by impingement of abrasive contaminants present in the environment, and which also serve as radial bearings to prevent tipping of the seal within its installation gland. 14 figs.

  10. Method and apparatus for monitoring motor operated valve motor output torque and power at valve seating

    SciTech Connect

    Casada, D.A.

    1996-01-16

    A method and apparatus are provided for monitoring a motor operated valve during the brief period when the valve seats and the torque switch trips to deenergize the valve motor. The method uses voltage measurements on the load side of a deenergizing switch that opens to deenergize the motor to determine, among other things, final motor rotational speed and the decelerating torque at motor deenergization. 14 figs.

  11. The EPSILON-2 hybrid dataflow architecture

    SciTech Connect

    Grafe, V.G.; Hoch, J.E.

    1989-11-08

    EPSILON-2 is a general parallel computer architecture that combines the fine grain parallelism of dataflow computing with the sequential efficiency common to von Neumann computing. Instruction level synchronization, single cycle context switches, and RISC-like sequential efficiency are all supported in EPSILON-2. The general parallel computing model of EPSILON-2 is described, followed by a description of the processing element architecture. A sample code is presented in detail, and the progress of the physical implementation discussed. 11 refs., 14 figs.

  12. LFCM (liquid-fed ceramic melter) vitrification technology: Quarterly progress report, January--March 1987

    SciTech Connect

    Brouns, R. A.; Allen, C. R.; Powell, J. A.

    1988-05-01

    This report is compiled by the Nuclear Waste Treatment Program and the Hanford Waste Vitrification Program at Pacific Northwest Laboratory to describe the progress in developing, testing, applying and documenting liquid-fed ceramic melter vitrification technology. Progress in the following technical subject areas during the second quarter of FY 1987 is discussed: melting process chemistry and glass development, feed preparation and transfer systems, melter systems, canister filling and handling systems, and process/product modeling. 23 refs., 14 figs., 10 tabs.

  13. The status of the US VAWT program

    SciTech Connect

    Dodd, H.M.; Berg, D.E.; Ashwill, T.D.; Sutherland, H.J.; Schluter, L.L.

    1991-01-01

    Vertical axis wind turbine (VAWT) technology in the United States started in the early 1970s directly from the original work in Canada. The close, and very productive relationships among laboratories, universities and industry have continued since that time. This paper briefly discusses the significant technical progress and rather dramatic programmatic changes that have occurred in the past 18 to 24 months on the US side of the border. 20 refs., 14 figs.

  14. Assessment of the theory and hypotheses of the acidification of watersheds

    SciTech Connect

    Krug, E.C.

    1989-04-01

    This report documents and critically assesses the evolution and status of the scientific understanding of the effects of acidic deposition on surface waters. The main conclusion is that the dominant theory of surface-water acidification fails to adequately incorporate many important factors and processes that influence surface water acidity. Some of these factors and processes are not well researched or recognized as being important by most scientists in the aquatic effects research area. 258 refs., 14 figs., 23 tabs.

  15. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1996-11-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  16. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Lipshutz, R.J.; Morris, M.S.; Winkler, J.L.

    1997-01-14

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  17. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1999-01-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  18. Low-density hydrocarbon foams for laser fusion targets: Progress report, 1986

    SciTech Connect

    Chen, C.; Cook, R.C.; Haendler, B.L.; Hair, L.M.; Kong, F.M.; Letts, S.A.

    1987-06-01

    We describe progress made during 1986 in the development of direct-drive hydrocarbon foam targets for laser fusion. The foam materials are polystyrene and resorcinolformaldehyde. The processes for making the foams, their properties, characterization techniques, and the relationships of their properties to target specifications are presented. In the final section, we discuss statistical experimental design techniques that are being used to optimize the foams. 12 refs., 14 figs., 2 tabs.

  19. Development of a new electrokinetic technique for decontamination of hexavalent chromium from low surface charged soils

    SciTech Connect

    Haran, B.S.; Popov, B.N.; Zheng, Guanghong; White, R.E.

    1996-12-31

    A new in-situ technique was developed for hexavalent chromium removal from sand. Imposition of constant potential gradient across the soil matrix through a graphite cathode and iron anode resulted in successful migration of chromate towards the anode. The hexavalent chromium ions are reduced to harmless trivalent form by chemical reaction with the anodic dissolution product, Fe{sup 2+}. 23 refs., 14 figs.

  20. Method and apparatus for monitoring aircraft components

    DOEpatents

    Dickens, L.M.; Haynes, H.D.; Ayers, C.W.

    1996-01-16

    Operability of aircraft mechanical components is monitored by analyzing the voltage output of an electrical generator of the aircraft. Alternative generators, for a turbine-driven rotor aircraft, include the gas producer turbine tachometer generator, the power turbine tachometer generator, and the aircraft systems power producing starter/generator. Changes in the peak amplitudes of the fundamental frequency and its harmonics are correlated to changes in condition of the mechanical components. 14 figs.

  1. Cold moderators for pulsed neutron sources

    SciTech Connect

    Carpenter, J.M.

    1990-01-01

    This paper reviews cold moderators in pulsed neutron sources and provides details of the performance of different cold moderator materials and configurations. Analytical forms are presented which describe wavelength spectra and emission time distributions. Several types of cooling arrangements used in pulsed source moderators are described. Choices of materials are surveyed. The author examines some of the radiation damage effects in cold moderators, including the phenomenon of burping'' in irradiated cold solid methane. 9 refs., 15 figs., 4 tabs.

  2. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    SciTech Connect

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K.

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs. (MHB)

  3. Formal system specifications: A case study of three diverse representations

    SciTech Connect

    Chisholm, G.H. ); Smith, B.T. New Mexico Univ., Albuquerque, NM . Dept. of Computer Science); Wojcik, A.S. Michigan State Univ., East Lansing, MI . Dept. of Computer Science)

    1990-12-01

    The only effective way to raise the confidence level of a program significantly is to give a convincing proof of its correctness. But one should not first make the program and then prove its correctness, because then the requirement of providing the proof would only increase the poor programmer's burden. On the contrary: the programmer should let correctness proof and program grow hand in hand. 21 refs., 15 figs.

  4. Shock ignition of pyrotechnic heat powders. [Aluminium/ferric oxide mixture

    SciTech Connect

    Hornig, H.C.; Kury, J.W.; Simpson, R.L.; Helm, F.H.; Von Holle, W.G.

    1986-05-14

    Over a dozen pyrotechnic mixtures of alloy forming elements or solid oxidizers and fuels were subjected to shock pressures of from 2 to 35 GPa. More than half of these formulations were ignited by the shock. Visible and ir time resolved radiometry experiments using one of these mixtures, aluminum/ferric oxide, showed that this shock induced ignition occurred in less than 0.1 usec. 9 refs., 15 figs., 3 tabs.

  5. Chaotic dynamics of loosely supported tubes in crossflow

    SciTech Connect

    Cai, Y.; Chen, S.S.

    1991-07-01

    By means of the unsteady-flow theory and a bilinear mathematical model, a theoretical study was conducted of the chaotic dynamics associated with the fluidelastic instability of loosely supported tubes. Calculations were performed for the RMS of tube displacement, bifurcation diagram, phase portrait, power spectral density, and Poincare map. Analytical results show the existence of chaotic, quasiperiodic, and periodic regions when flow velocity exceeds a threshold value. 38 refs., 15 figs., 2 tabs.

  6. A study of strange and strangeonium states produced in LASS (Large Aperture Superconducting Solenoid)

    SciTech Connect

    Aston, D.; Awaji, N.; Bienz, T.; Bird, F.; D'Amore, J.; Dunwoodie, W.; Endorf, R.; Fujii, K.; Hayashii, H.; Iwata, S.

    1986-01-01

    Results are presented from the analysis of several final states from a high-sensitivity (4 ev/nb) study of inelastic K/sup -/p interactions at 11 GeV/c carried out in the LASS Spectrometer at SLAC. New information is reported on leading and underlying K* states, and the strangeonium states produced by hypercharge exchange exchange are compared and contrasted with those observed in radiative decays of the J/psi. 8 refs., 15 figs.

  7. Channel plate for DNA sequencing

    DOEpatents

    Douthart, R.J.; Crowell, S.L.

    1998-01-13

    This invention is a channel plate that facilitates data compaction in DNA sequencing. The channel plate has a length, a width and a thickness, and further has a plurality of channels that are parallel. Each channel has a depth partially through the thickness of the channel plate. Additionally an interface edge permits electrical communication across an interface through a buffer to a deposition membrane surface. 15 figs.

  8. Tests of quantum chromodynamics in exclusive e sup + e sup minus and. gamma. gamma. processes

    SciTech Connect

    Brodsky, S.J.

    1989-09-01

    This paper discusses the following topics: Factorization theorem for exclusive processes; Electromagnetic form factors of baryons; Suppression of final state interactions; The {gamma}{pi}{sub 0} Transition form factor; Exclusive charmonium decays; The {pi}-{rho} puzzle; Time-like compton processes; Multi-hadron production; Heavy Quark exclusive states and form factor zeros in QCD; Exclusive {gamma}{gamma} reactions; Higher twist effects; and Tauonium and threshold {tau}{sup +}{tau}{sup {minus}} production. 41 refs., 15 figs. (LSP)

  9. FORIG: a computer code for calculating radionuclide generation and depletion in fusion and fission reactors. User's manual

    SciTech Connect

    Blink, J.A.

    1985-03-01

    In this manual we describe the use of the FORIG computer code to solve isotope-generation and depletion problems in fusion and fission reactors. FORIG runs on a Cray-1 computer and accepts more extensive activation cross sections than ORIGEN2 from which it was adapted. This report is an updated and a combined version of the previous ORIGEN2 and FORIG manuals. 7 refs., 15 figs., 13 tabs.

  10. Method and means for a spatial and temporal probe for laser-generated plumes based on density gradients

    DOEpatents

    Yeung, E.S.; Chen, G.

    1990-05-01

    A method and means are disclosed for a spatial and temporal probe for laser generated plumes based on density gradients includes generation of a plume of vaporized material from a surface by an energy source. The probe laser beam is positioned so that the plume passes through the probe laser beam. Movement of the probe laser beam caused by refraction from the density gradient of the plume is monitored. Spatial and temporal information, correlated to one another, is then derived. 15 figs.

  11. Radiochemistry of astatine

    SciTech Connect

    Ruth, T.J.; Dombsky, M.; D'Auria, J.M.; Ward, T.E.

    1988-01-01

    This monograph is a review of the literature through 1987 and covers the methods of producing the radioisotopes of astatine and the inorganic, nuclear, and organic chemistry of astatine. The discussion is limited to chemical and physical chemical properties of astatine. The monograph, after the introduction, is divided into chapters titled: production methods, nuclear spectroscopy, chemistry of astatine, separation and isolation (dry and wet), and selected procedures. 209 refs., 15 figs., 7 tabs. (DLC)

  12. High performance H modes in JET

    SciTech Connect

    Tanga, A.

    1990-01-01

    In JET the scientific properties and technical basis of good confinement regimes have been evaluated in the light of the potential extrapolation of such regimes to reactor requirements. In this paper the main experimental H-mode results are discussed highlighting global confinement scaling, low q regimes, the role of the target plate material, the density limit, and finally sawtooth suppression and hot-ion mode. 17 refs., 15 figs.

  13. The quest for the Higgs boson

    SciTech Connect

    Hinchliffe, I.

    1987-02-01

    Various ways are reviewed which have been suggested to search for the Higgs boson of the Weinberg-Salam model. It is found that if the Higgs mass is less than 40 GeV or so, it should be found in the decay of the Z either at the SLC or at LEP. Masses larger than this can be probed in the decay of toponium, if toponium exists in an accessible mass range. 27 refs., 15 figs. (LEW)

  14. Physical properties of contaminated trichloroethylene and 1,1,1- trichloroethane

    SciTech Connect

    Holt, R.D.

    1990-10-01

    The specific gravity, volume change, dielectric constant, dissipation factor, boiling point, and nonvolatile residue carryover during distillation was measured for various contamination levels of rosin in trichloroethylene and 1,1,1-trichloroethane. Solvent stabilizers and the vapor pressure of solvents were examined. The effects of unknown contamination in solvents from manufacturing departments were measured. The theoretical effects of oil contamination on the boiling point are discussed. 18 refs., 15 figs., 13 tabs.

  15. Application of microwave energy for in-drum solidification of simulated precipitation sludge

    SciTech Connect

    Petersen, R.D.; Johnson, A.J.; Swanson, S.D.; Thomas, R.L.

    1987-08-17

    The application of microwave energy for in-container solidification of simulated transuranic contaminated precipitation sludges has been tested. Results indicate volume reductions to 83% are achievable by the continuous feeding of pre-dried sludge into a waste container while applying microwave energy. An economic evaluation was completed showing achievable volume and weight reductions to 87% compared with a current immobilization process for wet sludge. 7 refs., 15 figs., 16 tabs.

  16. Research and development of a helium-4 based solar neutrino detector. Progress report, November 1, 1991--April 30, 1993

    SciTech Connect

    Lanou, R.E.; Maris, H.J.; Seidel, G.M.

    1993-05-01

    Superfluid helium possesses unique properties that enable it to be used as the major component of a very sensitive calorimetric detector: it is extremely pure, and the energy deposited in it is carried out by elementary excitations of the liquid which can produce quantum evaporation of He atoms at a free surface. It has a major advantage of being able to achieve very low background levels. Experimental results presented on the development of helium-4 detector include sensitivity, heat capacity of wafer-calorimeters, coincidence measurements, spectrum of alpha particles in helium, and quantum evaporation: angular dependence and efficiency. 29 refs., 16 figs., 1 tab.

  17. Electric sales and revenue 1997

    SciTech Connect

    1998-10-01

    The Electric Sales and Revenue is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels; Energy Information Administration (EIA); US Department of Energy. Information is provided on electricity sales, associated revenue, average revenue per kilowatthour sold, and number of consumers throughout the US. The data provided in the Electric Sales and Revenue are presented at the national, Census division, State, and electric utility levels. The information is based on annual data reported by electric utilities for the calendar year ending December 31, 1997. 16 figs., 17 tabs.

  18. Method for the thermal characterization, visualization, and integrity evaluation of conducting material samples or complex structures

    DOEpatents

    Ortiz, M.G.

    1992-11-24

    Disclosed is a method for modeling a conducting material sample or structure (herein called a system) as at least two regions which comprise an electrical network of resistances, for measuring electric resistance between at least two selected pairs of external leads attached to the surface of the system, wherein at least one external lead is attached to the surface of each of the regions, and, using basic circuit theory, for translating measured resistances into temperatures or thermophysical properties in corresponding regions of the system. 16 figs.

  19. Numerical modeling of HF skywave radiation from antennas in irregular terrain

    SciTech Connect

    Burke, G.J.

    1990-11-01

    The problem of computing the radiation pattern of an HF antenna sited in irregular terrain was investigated. The primary interest is in antennas for skywave communication, however ionospheric models were not considered. Several methods for modeling terrain effects are briefly reviewed. A geometrical optics model for arbitrary terrain is developed and results are compared with published results from solution of a Volterra integral equation for scattering by a Gaussian ridge. This report covers work on the first phase of a project for the US Navy to develop and apply models for terrain effects in HF communications involving skywave. 45 refs., 16 figs.

  20. Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) technology of mercury removal and stabilization

    SciTech Connect

    Feng, Xiangdong; Liu, Jun; Fryxell, G.E.

    1997-09-01

    This paper explains the technology developed to produce Self-Assembled Mercaptan on Mesoporous Silica (SAMMS) for mercury removal from aqueous wastewater and from organic wastes. The characteristics of SAMMS materials, including physical characteristics and mercury loading, and its application for mercury removal and stabilization are discussed. Binding kinetics and binding speciations are reported. Preliminary cost estimates are provided for producing SAMMS materials and for mercury removal from wastewater. The characteristics of SAMMS in mercury separation were studied at PNNL using simulated aqueous tank wastes and actual tritiated pump oil wastes from Savannah River Site; preliminary results are outlined. 47 refs., 16 figs., 16 tabs.

  1. Parasitic oscillation suppression in solid state lasers using absorbing thin films

    DOEpatents

    Zapata, L.E.

    1994-08-02

    A thin absorbing film is bonded onto at least certain surfaces of a solid state laser gain medium. An absorbing metal-dielectric multilayer film is optimized for a broad range of incidence angles, and is resistant to the corrosive/erosive effects of a coolant such as water, used in the forced convection cooling of the film. Parasitic oscillations hamper the operation of solid state lasers by causing the decay of stored energy to amplified rays trapped within the gain medium by total and partial internal reflections off the gain medium facets. Zigzag lasers intended for high average power operation require the ASE absorber. 16 figs.

  2. A manual for implementing residual radioactive material guidelines

    SciTech Connect

    Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III

    1989-06-01

    This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs.

  3. Motor monitoring method and apparatus using high frequency current components

    DOEpatents

    Casada, D.A.

    1996-05-21

    A motor current analysis method and apparatus for monitoring electrical-motor-driven devices are disclosed. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device. 16 figs.

  4. Photoinduced charge separation by polymer-bound chromophores

    SciTech Connect

    Rodgers, M.A.J.

    1991-09-01

    This project has examined the photodynamic behavior of water-soluble polymers that have covalently linked hydrophobic chromophores spaced along the chains. These polymeric systems have been examined for photoinduced charge separation with electron-accepting ions having different total charge. Focus has been on the excited singlet (S{sub 1}) state formed by laser flash absorption. The effects of pH and ionic strength -- factors that govern the conformational nature of the polymer in solution -- have been studied. A second major effort has been to study photoinduced redox processes involving excited states of water-soluble variants of anthracene and acridine. 27 refs., 16 figs., 2 tabs.

  5. Review of third phase formation in extraction of actinides by neutral organophosphorus extractants

    SciTech Connect

    Rao, P.R.V.; Kolarik, Z.

    1996-11-01

    Data are reviewed on the information of third phase in the extraction of actinide(IV,VI) nitrates by neutral organophosphorus extractants, mainly tributyl phosphate. The data are critically evaluated and the effect of variables on the third phase formation is discussed. The variables are the concentrations of nitric acid and the extractant, temperature, the nature of diluent, addition of modifiers and the ionic strength of the aqueous phase. Also discussed are systems involving two extracted actinide ions. 42 refs., 16 figs., 4 tabs.

  6. Evaluation of the ion trap mass spectrometer for potential application in the space station

    SciTech Connect

    Glish, G.L.; McLuckey, S.A.

    1988-04-01

    This report describes preliminary experiments with an ion trap mass spectrometer, which were done to evaluate its potential for use in the environmental monitoring system of the proposed space station. The first section of the report describes various modes of operation of the instrument, discusses some of the present limitations, and discusses some of the potential solutions to these limitations. The next section discusses the experimental results obtained on sixteen compounds with particular emphasis on comparing these data to that expected from a standard mass spectrometer. The last section consists of a conclusion and comments on suggested future work. 16 figs.

  7. Test results of a prototype dielectric microcalorimeter

    SciTech Connect

    Pfafman, T.E.; Silver, E.; Labov, S. ); Beeman, J.; Goulding, F.; Hansen, W.; Landis, D.; Madden, N. )

    1990-08-13

    The initial development work on a dielectric microcalorimeter is presented. It focuses on the dielectric properties of the ferroelectric material KTa{sub 1-x}Nb{sub x}O{sub 3} (KTN). Measurements of the temperature dependent dielectric constant are given together with the first alpha particle detection results from a prototype composite microcalorimeter operating at 1.3 K. a non-thermal mechanism for detecting 6 MeV alpha particles in a monolithic KTN sample is also reported. 7 refs, 16 figs., 1 tab.

  8. The epsilon dataflow processor

    SciTech Connect

    Grafe, V.G.; Davidson, G.S.; Hoch, J.E.; Holmes, V.P.

    1988-01-01

    The epsilon dataflow architecture is designed for high speed uniprocessor execution as well as for parallel processing. The epsilon architecture directly matches ready operands, thus eliminating the need for associative matching stores. epsilon also supports low cost data fan out and critical sections. A 10 MFLOPS CMOS/TTL processor prototype is running and its performance has been measured with several benchmarks. The prototype processor has demonstrated sustained performance exceeding that of comparable control flow processors running at higher clock rates (three times faster than a 20 MHz transputer and 24 times faster than a Sun on a suite of arithmetic tests, for example). 22 refs., 16 figs.

  9. Ultra-wideband receiver

    DOEpatents

    McEwan, T.E.

    1994-09-06

    An ultra-wideband (UWB) receiver utilizes a strobed input line with a sampler connected to an amplifier. In a differential configuration, [+-] UWB inputs are connected to separate antennas or to two halves of a dipole antenna. The two input lines include samplers which are commonly strobed by a gating pulse with a very low duty cycle. In a single ended configuration, only a single strobed input line and sampler is utilized. The samplers integrate, or average, up to 10,000 pulses to achieve high sensitivity and good rejection of uncorrelated signals. 16 figs.

  10. The tokamak as a neutron source

    SciTech Connect

    Hendel, H.W.; Jassby, D.L.

    1989-11-01

    This paper describes the tokamak in its role as a neutron source, with emphasis on experimental results for D-D neutron production. The sections summarize tokamak operation, sources of fusion and non-fusion neutrons, principal neutron detection methods and their calibration, neutron energy spectra and fluxes outside the tokamak plasma chamber, history of neutron production in tokamaks, neutron emission and fusion power gain from JET and TFTR (the largest present-day tokamaks), and D-T neutron production from burnup of D-D tritons. This paper also discusses the prospects for future tokamak neutron production and potential applications of tokamak neutron sources. 100 refs., 16 figs., 4 tabs.

  11. Environmental surveillance data report for the third quarter of 1990

    SciTech Connect

    Goldberg, P.Y.; Osborne-Lee, A.E.; Powell, M.R.; Stevens, M.M.; Tardiff, M.F.; Valentine, C.K.; Wolf, D.A.

    1991-07-01

    Each section of this report consists of a program description; results for the quarter: and an analysis of trends over the previous two years, depending upon the availability of data. The analyst who produced each section is identified in order to facilitate the reader in following up any questions regarding the data or the analysis approach. The reader is directed to the trend subsections for more in-depth summaries of each data section.The four major environmental topics included are air, water, meteorological processes and biological monitoring. 16 figs., 34 tabs.

  12. The GALLEX Project

    SciTech Connect

    Kirsten, T. )

    1989-01-01

    The GALLEX collaboration aims at the detection of solar neutrinos in a radiochemical experiment employing 30 tons of Gallium in form of concentrated aqueous Gallium-chloride solution. The detector is primarily sensitive to the otherwise inaccessible pp-neutrinos. Details of the experiment have been repeatedly described before. Here we report the present status of implementation in the Laboratori Nazionali del Gran Sasso (Italy). So far, 12.2 tons of Gallium are at hand. The present status of development allows to start the first full scale run at the time when 30 tons of Gallium become available. This date is expected to be January, 1990. 17 refs., 16 figs.

  13. Effects of fuel and additives on combustion chamber deposits

    SciTech Connect

    Jackson, M.M.; Pocinki, S.B.

    1994-10-01

    The effects of gasoline composition, as represented in typical regular and premium unleaded gasolines and fuel additives, on Combustion Chamber Deposits (CCD) were investigated in BMW and Ford tests. In addition, the influences of engine lubricant oil and ethanol oxygenate on CCD were examined in Ford 2.3L engine dynamometer tests. Also, additive effects of packages based on mineral oil fluidizers versus synthetic fluidizers were studied in several different engines for CCD. Finally, a new method for evaluating the effect of fluidizers on valve sticking is introduced. 6 refs., 16 figs., 14 tabs.

  14. Design approaches and parameters for magnetically levitated transport systems. [Null flux suspension (Maglev)

    SciTech Connect

    Danby, G.T.; Powell, J.R.

    1988-01-01

    Mechanically levitated transport system approaches are assessed with regard to thrust power needs, track cost, suspension stability, and safety. The null flux suspension appears as the favored approach, having the least thrust power requirements, highest stability, and lowest amount of track material. Various null flux configurations are described together with their operating parameters. The Linear Synchronous Motor (LSM) propulsion system is also described for propelling the suspended vehicles. Cryogenics and superconductivity aspects are discussed and the effect of high T/sub c/ superconductors evaluated. 13 refs., 16 figs., 2 tabs.

  15. Optical device with low electrical and thermal resistance Bragg reflectors

    SciTech Connect

    Lear, K.L.

    1996-10-22

    A compound-semiconductor optical device and method are disclosed. The optical device is provided with one or more asymmetrically-graded heterojunctions between compound semiconductor layers for forming a distributed Bragg reflector mirror having an improved electrical and thermal resistance. Efficient light-emitting devices such as light-emitting diodes, resonant-cavity light-emitting diodes, and vertical-cavity surface-emitting lasers may be formed according to the present invention, which may be applied to the formation of resonant-cavity photodetectors. 16 figs.

  16. The history of gamma-ray burst observations

    SciTech Connect

    Klebesadel, R.W.

    1988-01-01

    Cosmic gamma-ray bursts have been observed for 1-1/2 decades since their fortuitous discovery by nuclear test detection instruments flown on the Vela satellites. Although the volume and detail of data available through these observations has considerably refined our knowledge of the characteristics of these events, there is no confident identification of source objects or reliable model of the processes involved. The observations do suggest, however, that the bursts originate at neutron stars (probably highly-magnetized neutron stars). 17 refs., 16 figs.

  17. Automation of the New Brunswick Laboratory controlled-potential coulometric method for plutonium

    SciTech Connect

    Mitchell, W.G.; Troutman, D.; Lewis, K.

    1988-11-01

    The development and evolution of the automated coulometric analysis of plutonium at the New Brunswick Laboratory is described. The importance of maintaining electrical calibration of the analysis so that the results are traceable to the Faraday is discussed. The innovations which were necessary to achieve the desired accuracy and precision are explained. The experimental tests to qualify the instruments for use in sample analysis at New Brunswick Laboratory are detailed. Details of the calculations performed by the automated coulometer system are given in the Appendix. 21 refs., 16 figs., 4 tabs.

  18. Structural performance of the DOE's Idaho National Engineering Laboratory during the 1983 Borak Peak earthquake

    SciTech Connect

    Guenzler, R.C.; Gorman, V.W.

    1985-01-01

    The 1983 Borah Peak Earthquake (7.3 Richter magnitude) was the largest earthquake ever experienced by the DOE's Idaho National Engineering Laboratory (INEL). Reactor and plant facilities are generally located about 90 to 110 km (60 miles) from the epicenter. Several reactors were operating normally at the time of the earthquake. Based on detailed inspections, comparisons of measured accelerations with design levels, and instrumental seismograph information, it was concluded that the 1983 Borah Peak Earthquake created no safety problems for INEL reactors or other facilities. 10 refs., 16 figs., 2 tabs.

  19. Laboratory testing of TiB/sub 2/-based cathodes for electrolytic production of aluminum

    SciTech Connect

    Schilling, C.H.

    1988-07-01

    Experimental research was performed to evaluate TiB/sub 2/-based cathodes, which may be used for retrofitting existing commercial Hall-Heroult cells. Candidate cathode materials and retrofit designs were analyzed in laboratory-scale electrolysis tests and nonpolarized immersion tests in molten Al. The cathode materials and cathode attachment designs were selected based on a literature review (Schilling, Hagen, and Hart 1987) and previous experimental research at the Pacific Northwest Laboratory (Hart et al. 1987). 40 refs., 16 figs., 2 tabs.

  20. Electrocatalytic cermet sensor

    DOEpatents

    Shoemaker, E.L.; Vogt, M.C.

    1998-06-30

    A sensor is described for O{sub 2} and CO{sub 2} gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer. 16 figs.

  1. Petroleum supply monthly with data for June 1997

    SciTech Connect

    1997-08-01

    Data presented in this publication describe the supply and disposition of petroleum products in the United states and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the U.S. The report includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Both summary and detailed statistics are presented. 16 figs., 56 tabs.

  2. Petroleum supply annual 1998: Volume 1

    SciTech Connect

    1999-06-01

    The ``Petroleum Supply Annual`` (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1998, and replaces data previously published in the PSA. The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 59 tabs.

  3. Petroleum supply annual, 1997. Volume 1

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  4. Analysis of field errors in existing undulators

    SciTech Connect

    Kincaid, B.M.

    1990-01-01

    The Advanced Light Source (ALS) and other third generation synchrotron light sources have been designed for optimum performance with undulator insertion devices. The performance requirements for these new undulators are explored, with emphasis on the effects of errors on source spectral brightness. Analysis of magnetic field data for several existing hybrid undulators is presented, decomposing errors into systematic and random components. An attempts is made to identify the sources of these errors, and recommendations are made for designing future insertion devices. 12 refs., 16 figs.

  5. Electrochemically stable electrolytes

    DOEpatents

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1999-01-05

    This invention relates generally to inorganic ionic liquids which function as electrolytes and do not crystallize at ambient temperature. More specifically, this invention is directed to quasi-salt inorganic ionic liquids which comprise the reaction product of a strong Lewis acid with an inorganic halide-donating molecule. This invention is further directed to quasi-salt inorganic ionic liquid mixtures which comprise combinations of electrolyte additives and quasi-salt inorganic ionic liquids. These quasi-salt inorganic ionic liquid mixtures are useful electrolytes. 16 figs.

  6. Magnetic field quality analysis using ANSYS

    SciTech Connect

    Dell'Orco, D.; Chen, Y.

    1991-03-01

    The design of superconducting magnets for particles accelerators requires a high quality of the magnetic field. This paper presents an ANSYS 4.4A Post 1 macro that computes the field quality performing a Fourier analysis of the magnetic field. The results show that the ANSYS solution converges toward the analytical solution and that the error on the multipole coefficients depends linearly on the square of the mesh size. This shows the good accuracy of ANSYS in computing the multipole coefficients. 2 refs., 16 figs., 4 tabs.

  7. Pair production at GeV/u energies

    SciTech Connect

    Bottcher, C.; Strayer, M.R.

    1985-01-01

    Electron and positron production in relativistic ion-atom collisions is discussed within the context of the time-dependent Dirac-Hartree approximation to a fully relativistic field theory of the collision. The time-dependent fields are treated classically, and the numerical methods employing basis splines are discussed in detail and contrasted with results obtained from the case of non-relativistic velocities. The results of a one-dimensional model are presented and show a moderately large probability for pair production followed by electron capture. 8 refs., 16 figs.

  8. Process for producing phenolic compounds from lignins

    DOEpatents

    Agblevor, F.A.

    1998-09-15

    A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

  9. Environmental sampling and mud sampling program of CSDP (Continental Scientific Drilling Program) core hole VC-2B, Valles Caldera, New Mexico

    SciTech Connect

    Meeker, K.; Goff, F.; Gardner, J.N.; Trujillo, P.E.; Counce, D.

    1990-03-01

    An environmental sampling and drilling mud sampling program was conducted during the drilling operations of Continental Scientific Drilling Program (CSDP) core hole VC-2B, Valles caldera, New Mexico. A suite of four springs and creeks in the Sulphur Springs area were monitored on a regular basis to ensure that the VC-2B drilling program was having no environmental impact on water quality. In addition, a regional survey of springs in and around the Jemez Mountains was conducted to provide background data for the environmental monitoring. A drilling mud monitoring program was conducted during the operations to help identify major fluid entries in the core hole. 32 refs., 14 figs., 7 tabs.

  10. Low noise optical position sensor

    DOEpatents

    Spear, J.D.

    1999-03-09

    A novel optical position sensor is described that uses two component photodiodes electrically connected in parallel, with opposing polarities. A lens provides optical gain and restricts the acceptance angle of the detector. The response of the device to displacements of an optical spot is similar to that of a conventional bi-cell type position sensitive detector. However, the component photodiode design enables simpler electronic amplification with inherently less electrical noise than the bi-cell. Measurements by the sensor of the pointing noise of a focused helium-neon laser as a function of frequency demonstrate high sensitivity and suitability for optical probe beam deflection experiments. 14 figs.

  11. Apparatus for the separation of hydrophobic and hydrophilic particles using microbubble column flotation together with a process and apparatus for generation of microbubbles

    DOEpatents

    Yoon, R.H.; Adel, G.T.; Luttrell, G.H.

    1995-03-14

    An apparatus is disclosed for the microbubble flotation separation of very fine and coarse particles, especially coal, and minerals so as to produce high purity and high recovery efficiency. This is accomplished through the use of a flotation column, microbubbles, recycling of the flotation pulp, and countercurrent wash water to gently wash the froth. Also disclosed are unique processes and apparatus for generating microbubbles for flotation in a highly efficient and inexpensive manner using either a porous tube or in-line static generators. 14 figs.

  12. Real time sensor for therapeutic radiation delivery

    DOEpatents

    Bliss, M.; Craig, R.A.; Reeder, P.L.

    1998-01-06

    The invention is a real time sensor for therapeutic radiation. A probe is placed in or near the patient that senses in real time the dose at the location of the probe. The strength of the dose is determined by either an insertion or an exit probe. The location is determined by a series of vertical and horizontal sensing elements that gives the operator a real time read out dose location relative to placement of the patient. The increased accuracy prevents serious tissue damage to the patient by preventing overdose or delivery of a dose to a wrong location within the body. 14 figs.

  13. Lambda network having 2{sup m{minus}1} nodes in each of m stages with each node coupled to four other nodes for bidirectional routing of data packets between nodes

    DOEpatents

    Napolitano, L.M. Jr.

    1995-11-28

    The Lambda network is a single stage, packet-switched interprocessor communication network for a distributed memory, parallel processor computer. Its design arises from the desired network characteristics of minimizing mean and maximum packet transfer time, local routing, expandability, deadlock avoidance, and fault tolerance. The network is based on fixed degree nodes and has mean and maximum packet transfer distances where n is the number of processors. The routing method is detailed, as are methods for expandability, deadlock avoidance, and fault tolerance. 14 figs.

  14. Superconducting linacs: some recent developments

    SciTech Connect

    Bollinger, L.M.

    1985-01-01

    The paper is a review of superconducting linacs that are of interest for heavy-ion acceleration. Most of the paper is concerned with energy boosters for projectiles from tandem electrostatic accelerators, the only application for which superconducting linacs are now used for heavy-ion acceleration. There is also a brief discussion of the concept of a superconducting injector linac being developed as a replacement of the tandem in a multi-stage acceleration system. Throughout, the emphasis is on the technology of the superconducting linac, including some attention to the relationships between resonator design parameters and accelerator performance characteristics. 21 refs., 14 figs., 3 tabs.

  15. Fast repetition rate (FRR) fluorometer and method for measuring fluorescence and photosynthetic parameters

    DOEpatents

    Kolber, Z.; Falkowski, P.

    1995-06-20

    A fast repetition rate fluorometer device and method for measuring in vivo fluorescence of phytoplankton or higher plants chlorophyll and photosynthetic parameters of phytoplankton or higher plants is revealed. The phytoplankton or higher plants are illuminated with a series of fast repetition rate excitation flashes effective to bring about and measure resultant changes in fluorescence yield of their Photosystem II. The series of fast repetition rate excitation flashes has a predetermined energy per flash and a rate greater than 10,000 Hz. Also, disclosed is a flasher circuit for producing the series of fast repetition rate flashes. 14 figs.

  16. Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds

    DOEpatents

    Vo-Dinh, T.

    1994-06-07

    The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds. 14 figs.

  17. Method and composition for improving flux pinning and critical current in superconductors

    DOEpatents

    Morris, D.E.

    1995-07-04

    Superconducting materials and methods of forming superconducting materials are disclosed. Highly oxidized superconductors are heated at a relatively high temperature so as to release oxygen, which migrates out of the material, and form a non-superconducting phase which does not diffuse out of grains of the material. The material is then reoxidized at a lower temperature, leaving the non-superconducting inclusions inside a superconducting phase. The non-superconducting inclusions act as pinning centers in the superconductor, increasing the critical current thereof. 14 figs.

  18. Automated measurement system employing eddy currents to adjust probe position and determine metal hardness

    DOEpatents

    Prince, J.M.; Dodson, M.G.; Lechelt, W.M.

    1989-07-18

    A system for measuring the hardness of cartridge cases employs an eddy current probe for inducing and sensing eddy currents in each cartridge case. A first component of the sensed signal is utilized in a closed loop system for accurately positioning the probe relative to the cartridge case both in the lift off direction and in the tangential direction, and a second component of the sensed signal is employed as a measure of the hardness. The positioning and measurement are carried out under closed loop microprocessor control facilitating hardness testing on a production line basis. 14 figs.

  19. Fuel from farms: A guide to small-scale ethanol production: Second edition

    SciTech Connect

    Not Available

    1982-05-01

    This guide presents the current status of on-farm fermentation ethanol production as well as an overview of some of the technical and economic factors. Tools such as decision and planning worksheets and a sample business plan for use in exploring whether or not to go into ethanol production are given. Specifics in production including information on the raw materials, system components, and operational requirements are also provided. Recommendation of any particular process is deliberately avoided because the choice must be tailored to the needs and resources of each individual producer. The emphasis is on providing the facts necessary to make informed judgments. 98 refs., 14 figs., 9 tabs.

  20. Apparatus and process for the separation of hydrophobic and hydrophilic particles using microbubble column flotation together with a process and apparatus for generation of microbubbles

    DOEpatents

    Yoon, R.H.; Adel, G.T.; Luttrell, G.H.

    1992-12-01

    A method and apparatus are disclosed for the microbubble flotation separation of very fine and coarse particles, especially coal and minerals, so as to produce high purity and high recovery efficiency. This is accomplished through the use of a flotation column, microbubbles, recycling of the flotation pulp, and countercurrent wash water to gently wash the froth. Also disclosed are unique processes and apparatus for generating microbubbles for flotation in a highly efficient and inexpensive manner using either a porous tube or in-line static generators. 14 figs.

  1. Air-cooled condensers eliminate plant water use

    SciTech Connect

    Wurtz, W.; Peltier, R.

    2008-09-15

    River or ocean water has been the mainstay for condensing turbine exhaust steam since the first steam turbine began generating electricity. A primary challenge facing today's plant developers, especially in drought-prone regions, is incorporating processes that reduce plant water use and consumption. One solution is to shed the conventional mindset that once-through cooling is the only option and adopt dry cooling technologies that reduce plant water use from a flood to a few sips. A case study at the Astoria Energy plant, New York City is described. 14 figs.

  2. Cold cathode vacuum discharge tube

    DOEpatents

    Boettcher, G.E.

    1998-04-14

    A cold cathode vacuum discharge tube, and method for making same, with an interior surface of the trigger probe coated with carbon deposited by chemical vapor deposition (CVD) or diamond-like carbon (DLC) deposition are disclosed. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging. 14 figs.

  3. SWAAM-code development and verification and application to steam generator designs

    SciTech Connect

    Shin, Y.W.; Valentin, R.A.

    1990-01-01

    This paper describes the family of SWAAM codes which were developed by Argonne National Laboratory to analyze the effects of sodium-water reactions on LMR steam generators. The SWAAM codes were developed as design tools for analyzing various phenomena related to steam generator leaks and the resulting thermal and hydraulic effects on the steam generator and the intermediate heat transport system (IHTS). The paper discusses the theoretical foundations and numerical treatments on which the codes are based, followed by a description of code capabilities and limitations, verification of the codes and applications to steam generator and IHTS designs. 25 refs., 14 figs.

  4. Analysis of reinjection strategies for The Geysers

    SciTech Connect

    Shook, M.; Faulder, D.D.

    1991-01-01

    The Geysers has undergone severe pressure decline in recent years, and reinjection of condensate is thought to be one key to sustaining current steam production. Other methods of pressure maintenance include load cycling, or reduction of steam production during off-peak hours. It is likely that a combination of these two will prove to be optimum in providing pressure and fluid maintenance. This paper presents preliminary results of a study of various injection schemes for The Geysers. A number of injection scenarios are investigated, and an optimum scheme (based on specific parameters) is identified for two different quantities of reinjection. 9 refs., 14 figs., 1 tab.

  5. Subsystem fragility: Seismic Safety Margins Research Program (Phase I)

    SciTech Connect

    Kennedy, R. P.; Campbell, R. D.; Hardy, G.; Banon, H.

    1981-10-01

    Seismic fragility levels of safety related equipment are developed for use in a seismic oriented Probabilistic Risk Assessment (PRA) being conducted as part of the Seismic Safety Margins Research Program (SSMRP). The Zion Nuclear Power Plant is being utilized as a reference plant and fragility descriptions are developed for specific and generic safety related equipment groups in Zion. Both equipment fragilities and equipment responses are defined in probabilistic terms to be used as input to the SSMRP event tree/fault tree models of the Zion systems. 65 refs., 14 figs., 11 tabs.

  6. Solid waste projection model: Database version 1. 0 technical reference manual

    SciTech Connect

    Carr, F.; Bowman, A.

    1990-11-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC). The SWPM system provides a modeling and analysis environment that supports decisions in the process of evaluating various solid waste management alternatives. This document, one of a series describing the SWPM system, contains detailed information regarding the software and data structures utilized in developing the SWPM Version 1.0 Database. This document is intended for use by experienced database specialists and supports database maintenance, utility development, and database enhancement. Those interested in using the SWPM database should refer to the SWPM Database User's Guide. 14 figs., 6 tabs.

  7. Reaction synthesis of heat-resistant materials

    SciTech Connect

    Deevi, S.C.; Sikka, V.K.

    1995-12-31

    Exothermicity associated with the synthesis of aluminides can be utilized to obtain aluminides of transition metals. Combustion synthesis, extrusion, and hot pressing were utilized to obtain dense intermetallics and their composites. Composites were analyzed by X- ray diffraction and microscopy techniques, and tensile properties were measured on button-head and sheet specimens of intermetallics and their composites. Mechanical properties of intermetallics obtained by reaction synthesis and densification compare well with conventionally processed materials. Reaction-synthesis principles were also extended to weld overlays. Possible approaches to obtaining dense products by reaction synthesis and densification are summarized in a schematic illustration. 19 refs., 14 figs., 3 tabs.

  8. El Nino-southern oscillation related fluctuations of the marine carbon cycle

    SciTech Connect

    Winguth, A.M.E.; Heimann, M.; Kurz, K.D.; Maier-Reimer, E.; Mikolajewicz, U.; Segschneider, J. )

    1994-03-01

    The yearly increase in global atmospheric carbon dioxide concentration is not constant, fluctuating around a mean growth rate. Some previous work has been done looking at the relationship of CO2 fluctuations with the El Nino-Southern Oscillation (ENSO) events in the Pacific. This paper describes the response of the three-dimensional ocean circulation model (Hamburg LSG) coupled on-line with a oceanic carbon cycle model (HAMOCC-3) to realistic wind and air temperature field anomalies. The focus is the marine carbon cycle and the interannual variations of carbon fluxes between ocean and atmosphere during the strong El Nino of 1982/83. 53 refs., 14 figs.

  9. New high temperature plasmas and sample introduction systems for analytical atomic emission and mass spectrometry

    SciTech Connect

    Montaser, A.

    1992-01-01

    New high temperature plasmas and new sample introduction systems are explored for rapid elemental and isotopic analysis of gases, solutions, and solids using mass spectrometry and atomic emission spectrometry. Emphasis was placed on atmospheric pressure He inductively coupled plasmas (ICP) suitable for atomization, excitation, and ionization of elements; simulation and computer modeling of plasma sources with potential for use in spectrochemical analysis; spectroscopic imaging and diagnostic studies of high temperature plasmas, particularly He ICP discharges; and development of new, low-cost sample introduction systems, and examination of techniques for probing the aerosols over a wide range. Refs., 14 figs. (DLC)

  10. New high temperature plasmas and sample introduction systems for analytical atomic emission and mass spectrometry. Progress report, January 1, 1990--December 31, 1992

    SciTech Connect

    Montaser, A.

    1992-09-01

    New high temperature plasmas and new sample introduction systems are explored for rapid elemental and isotopic analysis of gases, solutions, and solids using mass spectrometry and atomic emission spectrometry. Emphasis was placed on atmospheric pressure He inductively coupled plasmas (ICP) suitable for atomization, excitation, and ionization of elements; simulation and computer modeling of plasma sources with potential for use in spectrochemical analysis; spectroscopic imaging and diagnostic studies of high temperature plasmas, particularly He ICP discharges; and development of new, low-cost sample introduction systems, and examination of techniques for probing the aerosols over a wide range. Refs., 14 figs. (DLC)

  11. Fuel quality effects on particulate matter emissions from light- and heavy-duty diesel engines

    SciTech Connect

    Den Ouden, C.J.J.; Clark, R.H.; Cowley, L.T.; Stradling, R.J.; Lange, W.W.; Maillard, C.

    1994-10-01

    This paper gives an update of Shell`s ongoing research on correlations between diesel fuel quality and particulate emissions in both heavy and light duty applications. An exhaust oxidation catalyst selectively decreases the particulate hydrocarbon fraction, leaving the fixed carbon fraction unaffected. This overall particulates reduction mechanism explains why particulate emissions from catalyst vehicles are less sensitive towards changes in fuel quality. An attempt has been made to explain the differences observed between particulate emissions from heavy- and light-duty engines. It is tentatively concluded that differences originate mainly from intrinsic differences between the heavy- and light-duty test cycles. 27 refs., 14 figs., 5 tabs.

  12. Apparatus and process for the separation of hydrophobic and hydrophilic particles using microbubble column flotation together with a process and apparatus for generation of microbubbles

    DOEpatents

    Yoon, R.H.; Adel, G.T.; Luttrell, G.H.

    1998-09-29

    A method and apparatus are disclosed for the microbubble flotation separation of very fine and coarse particles, especially coal and minerals, so as to produce high purity and high recovery efficiency. This is accomplished through the use of a flotation column, microbubbles, recycling of the flotation pulp, and countercurrent wash water to gently wash the froth. Also disclosed are unique processes and apparatus for generating microbubbles for flotation in a highly efficient and inexpensive manner using either a porous tube or in-line static generators. 14 figs.

  13. Trace element speciation in combustion processes - review and compilations of thermodynamic data

    SciTech Connect

    Karin Lundholm; Anders Nordin; Rainer Backman

    2007-12-15

    Chemical equilibrium calculations are often used to determine the fate of trace metals in combustion processes and to study the effects of different process variables and varying fuel compositions. This paper compares thermodynamic data on compounds containing the trace elements As, Cd, Cr, Cu and Pb from different database sources. The results showed significant differences in Gibbs free energy (G) values between existing databases in both number of compounds included in the databases and thermodynamic data. The differences also significantly affected the outcome of the equilibrium calculations. 24 refs., 14 figs., 5 tabs.

  14. Brazing of ceramic and graphite to metal in the fabrication of ICRF (ion cyclotron range of frequencies) antenna and feedthrough components

    SciTech Connect

    Schechter, D.E.; Sluss, F.; Hoffman, D.J.

    1987-01-01

    Fabrication of some of the more critical components of ion cyclotron range of frequencies (ICRF) antenna and feedthrough assemblies has involved the brazing of alumina ceramic and graphite to various metals. Copper end pieces have been successfully brazed to alumina cylinders for use in feedthroughs for TEXTOR and in feedthroughs and capacitors for a Tokamak Fusion Test Reactor (TFTR) antenna. Copper-plated Inconel rods and tubes have been armored with graphite for construction of Faraday shields on antennas for Doublet III-D and TFTR. Details of brazing procedures and test results, including rf performance, mechanical strength, and thermal capabilities, are presented. 14 figs.

  15. Interference Tests at Kawerau, New Zealand

    SciTech Connect

    Burnell, John G.; McGuinness, Mark J.

    1987-01-20

    Analysis of interference tests at the Kawerau geothermal field in New Zealand has indicated that the reservoir may be viewed on a coarse scale as a two-layer structure. While these layers have high permeabilities, they are in poor hydrological communication with each other. The shallower layer is modelled as a finite cylindrical reservoir. The deeper layer is modelled as a larger cylindrical reservoir with recharge from the sides. The fitted permeabilities and storativities suggest the importance of flow in fractures at Kawerau. 2 tabs., 14 figs., 8 refs.

  16. Microcomponent sheet architecture

    DOEpatents

    Wegeng, R.S.; Drost, M.K..; McDonald, C.E.

    1997-03-18

    The invention is a microcomponent sheet architecture wherein macroscale unit processes are performed by microscale components. The sheet architecture may be a single laminate with a plurality of separate microcomponent sections or the sheet architecture may be a plurality of laminates with one or more microcomponent sections on each laminate. Each microcomponent or plurality of like microcomponents perform at least one unit operation. A first laminate having a plurality of like first microcomponents is combined with at least a second laminate having a plurality of like second microcomponents thereby combining at least two unit operations to achieve a system operation. 14 figs.

  17. Low-level waste inventory, characteristics, generation, and facility assessment for treatment, storage, and disposal alternatives considered in the US Department of Energy waste management programmatic environmental impact statement

    SciTech Connect

    Goyette, M.L.; Dolak, D.A.

    1996-12-01

    This report provides technical support information for use in analyzing environmental impacts associated with U.S. Department of Energy (DOE) low-level radioactive waste (LLW) management alternatives in the Waste-Management (WM) Programmatic Environmental Impact Statement (PEIS). Waste loads treated and disposed of for each of the LLW alternatives considered in the DOE WM PEIS are presented. Waste loads are presented for DOE Waste Management (WM) wastes, which are generated from routine operations. Radioactivity concentrations and waste quantities for treatment and disposal under the different LLW alternatives are described for WM waste. 76 refs., 14 figs., 42 tabs.

  18. Coal industry annual 1996

    SciTech Connect

    1997-11-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  19. Results from a 100-hour electrolysis test of cermet anode: Materials aspects

    SciTech Connect

    Strachan, D.M.; Koski, O.H.; Morgan, L.G.; Westerman, R.E. ); Peterson, R.D.; Richards, N.E.; Tabereaux, A.T. . Mfg. Technology Lab.)

    1990-02-01

    Extensive materials examination were conducted following testing of a 15-cm-diameter prototype cermet anode. The anode was cut in half and samples were taken that were above, at, and below the electrolyte. The microstructure and phases were found to be different in each of these areas. For instance, the copper oxidized to CuO above the electrolyte, but Cu{sub 2}O appeared to be the favored oxidation product in the anode sample in the electrolyte. 9 refs., 14 figs.

  20. Submersible sodium pump

    DOEpatents

    Brynsvold, G.V.; Lopez, J.T.; Olich, E.E.; West, C.W.

    1989-11-21

    An electromagnetic submerged pump has an outer cylindrical stator with an inner cylindrical conductive core for the submerged pumping of sodium in the cylindrical interstitial volume defined between the stator and core. The cylindrical interstitial volume is typically vertically oriented, and defines an inlet at the bottom and an outlet at the top. The outer stator generates upwardly conveyed toroidal magnetic fields, which fields convey preferably from the bottom of the pump to the top of the pump liquid sodium in the cold leg of a sodium cooled nuclear reactor. The outer cylindrical stator has a vertically disposed duct surrounded by alternately stacked layers of coil units and laminates. 14 figs.

  1. Treaty verification with an uncertain partner

    SciTech Connect

    Weissenberger, S.

    1991-01-01

    A simple model is used to analyze the performance of a system for verifying compliance with an arms control treaty. Blue and Red are partners in to a treaty. Blue prefers to comply, but is uncertain whether Red similarly prefers compliance (in the absence of threatened violation detection). Blue's uncertainty is modeled as a probability distribution over three different Red types: Violators, Compilers, and Deterrables. Criteria are derived to determine the level at which Blue should set his detection threshold, and when it is best for Blue not to verify at all. The results involve both game-theoretic and Bayes solutions. 9 refs., 14 figs.

  2. Design calculations and measurements of a dipole magnet with Permendur pole pieces

    SciTech Connect

    Early, R.A.; Cobb, J.K.; Oijala, J.E.

    1989-03-01

    A redesign of the SLC South Linac-to-Ring beam line required that the width of a good field of three of the bending magnets be increased while utilizing the same yoke and coils. Further requirements were that the resulting magnets should have the same strength at two different operating currents as the original magnets. The idea of replacing the steel poles with pole pieces of the high permeability material Permendur was investigated. Design calculations were done using TOSCA and POISSON. An existing prototype magnet was modified with Permendur poles, and magnetic measurements were done. The new magnets were completed, and measurements agreed well with the calculations. 4 refs., 14 figs.

  3. Reclamation report, Basalt Waste Isolation Project, boreholes 1990

    SciTech Connect

    Brandt, C.A.; Rickard, W.H. Jr.; Cadoret, N.A.

    1991-01-01

    The restoration of areas disturbed activities of the Basalt Waste Isolation Project (BWIP) has been undertaken by the US Department of Energy (DOE) in fulfillment of obligations and commitments made under the National Environmental Policy Act and the Nuclear Waste Policy Act. This restoration program comprises three separate projects: borehole reclamation, Near Surface Test Facility reclamation, and Exploratory Shaft Facility reclamation. Detailed descriptions of these reclamation projects may be found in a number of previous reports. This report describes the second phase of the reclamation program for the BWIP boreholes and analyzes its success relative to the reclamation objective. 6 refs., 14 figs., 13 tabs.

  4. Erbium-based magnetic refrigerant (regenerator) for passive cryocooler

    DOEpatents

    Gschneidner, K.A. Jr.; Pecharsky, V.K.

    1996-07-23

    A two stage Gifford-McMahon cryocooler is disclosed having a low temperature stage for reaching approximately 10K, wherein the low temperature stage includes a passive magnetic heat regenerator selected from the group consisting of Er{sub 6}Ni{sub 2}Sn, Er{sub 6}Ni{sub 2}Pb, Er{sub 6}Ni{sub 2}(Sn{sub 0.75}Ga{sub 0.25}), and Er{sub 9}Ni{sub 3}Sn comprising a mixture of Er{sub 3}Ni and Er{sub 6}Ni{sub 2}Sn in the microstructure. 14 figs.

  5. Modal testing of a very flexible 110 m wind turbine structure

    SciTech Connect

    Carne, T.G.; Lauffer, J.P.; Gomez, A.J.; Benjannet, Hassine

    1988-01-01

    Modal Testing of immense and very flexible structures poses a number of problems. It requires innovative excitation techniques since the modal frequencies of these stuctures can be quite low. Also, substantial energy must be input to the structure to obtain reasonable levels of response. In this paper, results are presented from a modal test of the 110 m tall EOLE wind turbine which had four modal frequencies below 1.0 Hz. Step-relaxation and wind were used to excite the structure. 5 refs., 14 figs., 2 tabs.

  6. Modal testing the EOLE

    SciTech Connect

    Carne, T.G.; Lauffer, J.P.; Gomez, A.J.

    1987-01-01

    Modal testing an immense and flexible wind turbine poses a number of problems. It requires innovative excitation techniques since the modal frequencies of this type of structure are quite low. Also, substantial energy must be input to the structure to obtain reasonable levels of response. In this paper, the results of the modal test of the 110 m tall EOLE wind turbine are presented which had a number of modal frequencies below 1.0 Hz. Step-relaxation and wind were used to excite the structure. 5 refs., 14 figs., 2 tabs.

  7. Variable loading roller

    DOEpatents

    Williams, D.M.

    1988-01-21

    An automatic loading roller for transmitting torque in traction drive devices in manipulator arm joints includes a two-part camming device having a first cam portion rotatable in place on a shaft by an input torque and a second cam portion coaxially rotatable and translatable having a rotating drive surface thereon for engaging the driven surface of an output roller with a resultant force proportional to the torque transmitted. Complementary helical grooves in the respective cam portions interconnected through ball bearings interacting with those grooves effect the rotation and translation of the second cam portion in response to rotation of the first. 14 figs.

  8. Evaluation of a new, macroporous polyvinylpyridine resin for processing plutonium using nitrate anion exchange

    SciTech Connect

    Marsh, S.F.

    1989-04-01

    Anion exchange in nitric acid is the major aqueous process used to recover and purify plutonium from impure scrap materials. Most strong-base anion exchange resins incorporate a styrene-divinylbenzene copolymer. A newly available, macroporous anion exchange resin based on a copolymer of 1-methyl-4-vinylpyridine and divinylbenzene has been evaluated. Comparative data for Pu(IV) sorption kinetics and capacity are presented for this new resin and two other commonly used anion exchange resins. The new resin offers high capacity and rapid sorption kinetics for Pu(IV) from nitric acid, as well as greatly stability to chemical and radiolytic degradation. 8 refs., 14 figs.

  9. Mechanisms of interaction of radiation with matter

    SciTech Connect

    Not Available

    1990-01-01

    This progress report is a summary and update of the research performed under DOE grant FG-02086-ER60405 from September 1, 1989 to August 31, 1990. Part I deals with mechanisms of photoemission from organic particulates, theoretical studied of the photoemission of electrons into atmospheres containing scavenger molecules, and theoretical studies of the possible existence of excitonic ions. Part II deals with the mechanisms of electrolytic reactions which occur at solid anthracene/aqueous electrolyte interfaces. Part III describes our most recent results on the physico-chemical interactions of mutagenic and carcinogenic polycyclic aromatic hydrocarbon (PAH) derivatives with nucleic acids. 3 refs., 14 figs., 2 tabs.

  10. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOEpatents

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  11. Efficient alternatives for electric drives

    SciTech Connect

    Comnes, G.A.; Barnes, R.W.

    1987-11-01

    This analysis of industrial electric motors describes the current motor stock, its energy use and operating characteristics, and innovations that could change current use patterns. It provides calculations characterizing the economic attractiveness of several existing and potential options. One attractive option given particular attention is the adjustable-speed drive which can replace throttles or valves for many pumping operations. A major conclusion is that, throughout industry, options that are both energy-saving and economically attractive appear to penetrate markets more slowly than would be socially optimal. The final section examines characteristics of industry that may contribute to slow market penetration. 29 refs., 14 figs., 14 tabs.

  12. An idealized transient model for melt dispersal from reactor cavities during pressurized melt ejection accident scenarios

    SciTech Connect

    Tutu, N.K.

    1991-06-01

    The direct Containment Heating (DCH) calculations require that the transient rate at which the melt is ejected from the reactor cavity during hypothetical pressurized melt ejection accident scenarios be calculated. However, at present no models, that are able to predict the available melt dispersal data from small scale reactor cavity models, are available. In this report, a simple idealized model of the melt dispersal process within a reactor cavity during a pressurized melt ejection accident scenario is presented. The predictions from the model agree reasonably well with the integral data obtained from the melt dispersal experiments using a small scale model of the Surry reactor cavity. 17 refs., 15 figs.

  13. Quality and Behavior of Juvenile Salmonids in the Columbia River Estuary and Nearshore Ocean and Effects of the Ocean Environment on the Survival of Columbia River Juvenile Salmonids, 1989-1994 Technical Report.

    SciTech Connect

    Francis, R.C.; Schiewe, Michael H.; Fisher, J.P.

    1989-05-01

    In response to this limited understanding of the factors responsible for the continuing decline of spring chinook salmon in the Columbia River, this research plan was developed. The overall goal of the proposed research is to investigate and identify relationships among smolt quality (measured in the hatchery and after recovery in the estuary and nearshore ocean), environmental conditions in the estuary and nearshore ocean during smolt migration, and long-term survival (as measured by adult returns to the hatchery of origin and contributions to the recreational, commercial, and tribal fisheries). 16 refs., 15 figs., 3 tabs.

  14. Linear accelerators for TeV colliders. Revision

    SciTech Connect

    Wilson, P.B.

    1985-10-01

    The basic scaling relations for important linear collider design parameters are introduced. Some of the basic concepts concerning the design of accelerating structures are presented, and breakdown limitations are discussed. Rf power sources are considered. Some of the key concepts of wakefield accelerators are discussed, and some examples of wake fields for typical linac structures are presented. Some general concepts concerning emittance, and the limitations on the emittance that can be obtained from linac guns and damping rings are discussed. 49 refs., 15 figs. (LEW)

  15. Apparatus and method for identification and recognition of an item with ultrasonic patterns from item subsurface micro-features

    DOEpatents

    Perkins, R.W.; Fuller, J.L.; Doctor, S.R.; Good, M.S.; Heasler, P.G.; Skorpik, J.R.; Hansen, N.H.

    1995-09-26

    The present invention is a means and method for identification and recognition of an item by ultrasonic imaging of material microfeatures and/or macrofeatures within the bulk volume of a material. The invention is based upon ultrasonic interrogation and imaging of material microfeatures within the body of material by accepting only reflected ultrasonic energy from a preselected plane or volume within the material. An initial interrogation produces an identification reference. Subsequent new scans are statistically compared to the identification reference for making a match/non-match decision. 15 figs.

  16. A CP violation and rare kaon decay experiment at Fermilab

    SciTech Connect

    Yamanaka, Taku

    1989-02-01

    The E731 collaboration at Fermilab has collected enough K ..-->.. 2..pi.. events to give a statistical error of approx.0.5 /times/ 10/sup /minus/3/ on the CP violation parameter epsilon'/epsilon. Improvements have been made to reduce the systematic error. The experiment is also sensitive to many rare decays, and it set a new limit on the branching ratio of K/sub L/ ..-->.. ..pi../sup 0/e/sup +/e/sup /minus//, < 4.2 /times/ 10/sup /minus/8/ (90% CL). 10 refs., 15 figs., 1 tab.

  17. A method for handling slanted conducting surfaces in EM PIC codes

    SciTech Connect

    Pointon, T D

    1988-06-01

    A new version of MAGIC, a 2-1/2D relativistic electromagnetic particle simulation code, has been developed to handle slanted conducting surfaces. Modifications to standard algorithms for the electromagnetic field advance, charge and current densities, particle destruction, and field averaging are discussed. In addition, a new model for field emission from conducting boundary surfaces is described. Particles can be emitted from conformal or slanted surfaces, and also from certain types of corners. Results of the new code on several problems are presented. 10 refs., 15 figs.

  18. Progress in The Lost Circulation Technology Development Program

    SciTech Connect

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Wright, E.K.

    1991-01-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50{percent} through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April, 1990--March, 1991. 4 refs., 15 figs., 1 tab.

  19. Optimized achromatic phase-matching system and method

    DOEpatents

    Trebino, R.; DeLong, K.; Hayden, C.

    1997-07-15

    An optical system for efficiently directing a large bandwidth light (e.g., a femtosecond laser pulse) onto a nonlinear optical medium includes a plurality of optical elements for directing an input light pulse onto a nonlinear optical medium arranged such that the angle {theta}{sub in} which the light pulse directed onto the nonlinear optical medium is substantially independent of a position x of the light beam entering the optical system. The optical system is also constructed such that the group velocity dispersion of light pulses passing through the system can be tuned to a desired value including negative group velocity dispersion. 15 figs.

  20. Polarization at SLC

    SciTech Connect

    Swartz, M.L.

    1988-07-01

    The SLAC Linear Collider has been designed to readily accommodate polarized electron beams. Considerable effort has been made to implement a polarized source, a spin rotation system, and a system to monitor the beam polarization. Nearly all major components have been fabricated. At the current time, several source and polarimeter components have been installed. The installation and commissioning of the entire system will take place during available machine shutdown periods as the commissioning of SLC progresses. It is expected that a beam polarization of 45% will be achieved with no loss in luminosity. 13 refs., 15 figs.

  1. Cold cathode vacuum discharge tube

    DOEpatents

    Boettcher, G.E.

    1998-03-10

    A cold cathode vacuum discharge tube, and method for making same, are disclosed with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging. 15 figs.

  2. Qualitative validation of pollutant transport components of an unsaturated soil zone model (SESOIL)

    SciTech Connect

    Hetrick, D.M.; Travis, C.C.; Leonard, S.K.; Kinerson, R.S.

    1989-03-01

    Model predictions of a revised version of the soil compartment model SESOIL are compared with empirical measurements of pollutant transport in soil. A description of SESOIL is given, and modifications to the model are presented. Comparisons are performed using data from a laboratory soil column study involving six chemicals (dicamba, 2,4-dichlorophenoxyacetic acid, atrazine, diazinon, pentachlorophenol, and lindane) and data from three field studies involving the transport of aldicarb and atrazine. Model performance and limitations are discussed. 32 refs., 15 figs., 7 tabs.

  3. Application of nonlinear time series models to driven systems

    SciTech Connect

    Hunter, N.F. Jr.

    1990-01-01

    In our laboratory we have been engaged in an effort to model nonlinear systems using time series methods. Our objectives have been, first, to understand how the time series response of a nonlinear system unfolds as a function of the underlying state variables, second, to model the evolution of the state variables, and finally, to predict nonlinear system responses. We hope to address the relationship between model parameters and system parameters in the near future. Control of nonlinear systems based on experimentally derived parameters is also a planned topic of future research. 28 refs., 15 figs., 2 tabs.

  4. Methods for operating parallel computing systems employing sequenced communications

    DOEpatents

    Benner, R.E.; Gustafson, J.L.; Montry, G.R.

    1999-08-10

    A parallel computing system and method are disclosed having improved performance where a program is concurrently run on a plurality of nodes for reducing total processing time, each node having a processor, a memory, and a predetermined number of communication channels connected to the node and independently connected directly to other nodes. The present invention improves performance of the parallel computing system by providing a system which can provide efficient communication between the processors and between the system and input and output devices. A method is also disclosed which can locate defective nodes with the computing system. 15 figs.

  5. Experimental determination of the shipboard fire environment for simulated radioactive material packages

    SciTech Connect

    Koski, J.A.; Bobbe, J.G.; Arviso, M.

    1997-03-01

    A series of eight fire tests with simulated radioactive material shipping containers aboard the test ship Mayo Lykes, a break-bulk freighter, is described. The tests simulate three basic types of fires: engine room fires, cargo fires and open pool fires. Detailed results from the tests include temperatures, heat fluxes and air flows measured during the fires. The first examination of the results indicates that shipboard fires are not significantly different from fires encountered in land transport. 13 refs., 15 figs., 11 tabs.

  6. Hydraulically refueled battery employing a packed bed metal particle electrode

    SciTech Connect

    Siu, S.C.; Evans, J.W.

    1998-12-15

    A secondary zinc air cell, or another selected metal air cell, employing a spouted/packed metal particle bed and an air electrode is described. More specifically, two embodiments of a cell, one that is capable of being hydraulically recharged, and a second that is capable of being either hydraulically or electrically recharged. Additionally, each cell includes a sloped bottom portion to cause stirring of the electrolyte/metal particulate slurry when the cell is being hydraulically emptied and refilled during hydraulically recharging of the cell. 15 figs.

  7. Integration of heat pumps into industrial processes

    SciTech Connect

    Chappell, R.N. ); Priebe, S.J. )

    1989-01-01

    The Department of Energy and others have funded studies to assess the potential for energy savings using industrial heat pumps. The studies included classifications of heat pumps, economic evaluations, and placement of heat pumps in industrial processes. Pinch technology was used in the placement studies to determine the placement, size, and type of heat pumps for a given applications. There appears to be considerable scope for heat pumping in several industries, but, where maximum process energy savings are desired, it is important to consider heat pumping in the context of overall process integration. 19 refs., 15 figs.

  8. Analysis of radiofrequency discharges in plasma

    DOEpatents

    Kumar, D.; McGlynn, S.P.

    1992-08-04

    Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition. 15 figs.

  9. Magnetic filter apparatus and method for generating cold plasma in semiconductor processing

    DOEpatents

    Vella, M.C.

    1996-08-13

    Disclosed herein is a system and method for providing a plasma flood having a low electron temperature to a semiconductor target region during an ion implantation process. The plasma generator providing the plasma is coupled to a magnetic filter which allows ions and low energy electrons to pass therethrough while retaining captive the primary or high energy electrons. The ions and low energy electrons form a ``cold plasma`` which is diffused in the region of the process surface while the ion implantation process takes place. 15 figs.

  10. High performance electrolytes for MCFC

    DOEpatents

    Kaun, T.D.; Roche, M.F.

    1999-08-24

    A carbonate electrolyte of the Li/Na or CaBaLiNa system is described. The Li/Na carbonate has a composition displaced from the eutectic composition to diminish segregation effects in a molten carbonate fuel cell. The CaBaLiNa system includes relatively small amounts of Ca{sub 2}CO{sub 3} and BaCO{sub 3}, and preferably of equimolar amounts. The presence of both Ca and BaCO{sub 3} enables lower temperature fuel cell operation. 15 figs.

  11. Towards the development of multilevel-multiagent diagnostic aids

    SciTech Connect

    Stratton, R.C.; Jarrell, D.B.

    1991-10-01

    Presented here is our methodology for developing automated aids for diagnosing faults in complex systems. We have designed these aids as multilevel-multiagent diagnostic aids based on principles that should be generally applicable to any complex system. In this methodology, multilevel'' refers to information models described at successful levels of abstraction that are tied together in such a way that reasoning is directed to the appropriate level as determined by the problem solving requirements. The concept of multiagent'' refers to the method of information processing within the multilevel model network; each model in the network is an independent information processor, i.e., an intelligent agent. 19 refs., 15 figs., 9 tabs.

  12. Optical data transmission at the superconducting super collider

    SciTech Connect

    Leskovar, B.

    1989-02-01

    Digital and analog data transmissions via fiber optics for the Superconducting Super Collider have been investigated. The state of the art of optical transmitters, low loss fiber waveguides, receivers and associated electronics components are reviewed and summarized. Emphasis is placed on the effects of the radiation environment on the performance of an optical data transmission system components. Also, the performance of candidate components of the wide band digital and analog transmission systems intended for deployment of the Superconducting Super Collider Detector is discussed. 27 refs., 15 figs.

  13. Hypervelocity impact calculations using CTH: Case studies

    SciTech Connect

    Trucano, T.G.; McGlaun, J.M.

    1989-01-01

    In this paper, we discuss the application of CTH, a multi-dimensional Eulerian shock wave physics code, by discussing its application to hypervelocity impact problems. CTH is heavily used for this and other types of applications. We will not attempt to provide a broad discussion of examples and capabilities. Rather, we choose to focus on certain features of CTH that are of interest in gaining understanding of some of the more delicate issues of numerical impact simulations. 14 refs., 15 figs., 1 tab.

  14. Method for the purification of noble gases, nitrogen and hydrogen

    DOEpatents

    Baker, J.D.; Meikrantz, D.H.; Tuggle, D.G.

    1997-09-23

    A method and apparatus are disclosed for the purification and collection of hydrogen isotopes in a flowing inert gaseous mixture containing impurities, wherein metal alloy getters having the capability of sorbing non-hydrogen impurities such as oxygen, carbon dioxide, carbon monoxide, methane, ammonia, nitrogen and water vapor are utilized to purify the gaseous mixture of impurities. After purification hydrogen isotopes may be more efficiently collected. A plurality of parallel process lines utilizing metal getter alloys can be used to provide for the continuous purification and collection of the hydrogen isotopes. 15 figs.

  15. Results from heavy-ion bombardments of sup 254 Es

    SciTech Connect

    Hulet, E.K.

    1989-09-26

    We report our experimental work and offer our most recent data on the decay properties for five new isotopes of Md, No, Lr, and for {sup 258m}Md. In addition to these successful experiments, we have also conducted searches for {sup 263}(105), {sup 264}(105), {sup 272}(109), and superheavy elements. Finally, we summarize our conclusions based on what we have learned so far and what we believe are the most critical directions that should now be taken. 19 refs., 15 figs.

  16. Experimental evaluation of earthquake induced relay chattering

    SciTech Connect

    Bandyopadhyay, K.; Hofmayer, C.; Shteyngart, S.

    1990-01-01

    An experimental evaluation of relay performance under vibratory environments is discussed in this paper. Single frequency excitation was used for most tests. Limited tests were performed with random multifrequency inputs. The capacity of each relay was established based on a two-millisecond chatter criterion. The experimental techniques are described and the effects of parameters in controlling the relay capacity levels are illustrated with test data. A wide variation of the capacity levels was observed due to the influence of parameters related to the design of the relay and nature of the input motion. 3 refs., 15 figs.

  17. Radiation imaging apparatus

    DOEpatents

    Anger, H.O.; Martin, D.C.; Lampton, M.L.

    1983-07-26

    A radiation imaging system using a charge multiplier and a position sensitive anode in the form of periodically arranged sets of interconnected anode regions for detecting the position of the centroid of a charge cloud arriving thereat from the charge multiplier. Various forms of improved position sensitive anodes having single plane electrode connections are disclosed. Various analog and digital signal processing systems are disclosed, including systems which use the fast response of microchannel plates, anodes and preamps to perform scintillation pulse height analysis digitally. 15 figs.

  18. Heat flow and geothermal studies in the state of Washington

    SciTech Connect

    Blackwell, D.D.; Steele, J.L.; Kelley, S.A.

    1985-08-01

    Existing geothermal gradient and heat flow data for the state of Washington are summarized. In addition, information on mean-annual ground surface temperatures is included. The data consist of accurate, detailed temperature-depth measurements in selected available holes throughout the state of Washington made between 1979 and 1982. Measurements of thermal conductivity on selected rock samples from these drill holes and ancillary information required to assess the significance of the data and calculate heat flow values were obtained as well. Information is presented on the mean-annual ground-surface temperatures throughout the state of Washington. 32 refs., 15 figs., 4 tabs.

  19. New O(6) region near A = 130 and the interplay of triaxiality and gamma-softness in the IBA

    SciTech Connect

    Casten, R.F.

    1984-01-01

    A simple approach to the IBA is described, which exploits the consistent Q-formalism to describe both symmetries and transition regions with a minimum of parameters. Some results with this approach are discussed and compared with the data for deformed and transitional nuclei. Following this introduction, a new region of O(6) symmetry is presented and compared with the Pt region with which it is found to share many similarities. Discrepancies with the strict limiting symmetry are described in terms of symmetry breaking via a small triaxial potential. 28 refs., 15 figs.

  20. Symmetries in heavy nuclei and the proton-neutron interaction

    SciTech Connect

    Casten, R.F.

    1986-01-01

    The Interacting Boson Approximation (IBA) nuclear structure model can be expressed in terms of the U(6) group, and thereby leads to three dynamical symmetries (or group chains) corresponding to different nuclear coupling schemes and geometrical shapes. The status of the empirical evidence for these three symmetries is reviewed, along with brief comments on the possible existence of supersymmetries in nuclei. The relationships between these symmetries, the nuclear phase transitional regions linking them, and the residual proton-neutron interaction are discussed in terms of a particularly simple scheme for parameterizing the effects of that interaction. 34 refs., 15 figs.

  1. Multiple-electron processes in fast ion-atom collisions

    SciTech Connect

    Schlachter, A.S.

    1989-03-01

    Research in atomic physics at the Lawrence Berkeley Laboratory Super-HILAC and Bevalac accelerators on multiple-electron processes in fast ion-atom collisions is described. Experiments have studied various aspects of the charge-transfer, ionization, and excitation processes. Examples of processes in which electron correlation plays a role are resonant transfer and excitation and Auger-electron emission. Processes in which electron behavior can generally be described as uncorrelated include ionization and charge transfer in high-energy ion-atom collisions. A variety of experiments and results for energies from 1 MeV/u to 420 MeV/u are presented. 20 refs., 15 figs.

  2. Surfactant loss: Effects of temperature, salinity, and wettability

    SciTech Connect

    Noll, L.A.; Gall, B.L.; Crocker, M.E.; Olsen, D.K.

    1989-05-01

    Adsorption of sodium dodecylsulfate, Triton X-100, decyltrimethylammonium bromide surfactants onto silica gel and Berea sandstone mineral surfaces has been studied as a function of temperature, solution salt concentration, and mineral surface wettability. Adsorption studies using a flow calorimeter were conducted using pure surfactants and minerals. The studies were then extended to the adsorption of one type of commercial surfactant onto both consolidated and crushed Berea sandstone using column techniques. This has allowed the comparison of different methods to evaluate surfactant losses from flowing rather than static surfactant solutions. 20 refs., 15 figs., 37 tabs.

  3. EPFL (Swiss) Fusion-Fission Hybrid Experiment. Progress report No. 15, August 1, 1985-October 31, 1985

    SciTech Connect

    Woodruff, G.L.

    1986-01-01

    A series of calculations have been performed to analyze the Lithium Blanket Module (LBM) when driven by a Haefely neutron source. In these calculations the LBM was positioned on the center line of the Haefely at a distance of 20 cm from the front face of the Haefely. The back wall of the LOTUS cavity was placed 139 cm from the front of the Haefely. A Haefely accelerating potential of 170 keV was assumed. No support structure for LBM was included. 2 refs., 15 figs., 2 tabs.

  4. Recent results in high E{sub T} jet production

    SciTech Connect

    Lamoureux, J.; CDF Collaboration

    1997-02-01

    We present results on high E{sub T} jet measurements from CDF and D0. First we show the inclusive jet cross section and compare it to NLO QCD predictions. Preliminary CDF measurements of the {Sigma} E{sub T} cross section are also shown. In order to place limits on the amount of quark compositeness the data can tolerate, we show the dijet angular distributions. Finally, we discuss the inclusive jet cross section measurement at {radical}s = 0.63 TeV and tests of scaling. 13 refs., 15 figs.

  5. Grid sensitivity in low Reynolds number hypersonic continuum flows

    SciTech Connect

    Rutledge, W.H. ); Hoffmann, K.A. . Dept. of Aerospace Engineering)

    1991-01-01

    A computational scheme is presented to solve the unsteady Navier-Stokes equations over a blunt body at high altitude, high Mach number atmospheric reentry flow conditions. This continuum approach is directed to low Reynolds/low density hypersonic flows by accounting for non-zero bulk viscosity effects in near frozen flow conditions. A significant difference from previous studies is the inclusion of the capability to model non-zero bulk viscosity effects. The grid definition for these low Reynolds number, viscous dominated flow fields is especially important in terms of numerical stability and accurate heat transfer solutions. 11 refs., 15 figs.

  6. Effects from measured ground motions at the SSC

    SciTech Connect

    Ng, King-Yuen ); Peterson, J.M. )

    1990-12-01

    The separation of the two beams in the SSC caused by ground motion produced by railroad and highway traffic crossing over the ring and by nearby quarry blasts were estimated from measured amplitude spectra using a complete optical model of the accelerator lattice, but a simplified model of the ground structure. The beam separation expected from the largest ground motion recorded from train crossings is only a few percent of the rms beam width at the beam-crossing points. However, the beam separation caused by quarry blasts are larger and can momentarily produce significant loss in luminosity. 6 refs., 15 figs., 3 tabs.

  7. Update of national ozone study: Where are we now?

    SciTech Connect

    Mathur, B.

    1996-12-31

    This paper is one of three keynote presentations given at the conference. It addresses the issue of national ozone research in focusing on the regional task force, Ozone Transport Assessment Group (OTAG). The overall objectives of the OTAG initiatives are reported. These include development of a comprehensive regional emissions inventory, selection of research models and protocols, identification of criteria for selecting emissions control strategies, and development of a framework for a NO{sub x} trading system. Findings from preliminary modeling runs and analyses are presented. 15 figs., 15 tabs.

  8. Ultra-wideband radar motion sensor

    DOEpatents

    McEwan, T.E.

    1994-11-01

    A motion sensor is based on ultra-wideband (UWB) radar. UWB radar range is determined by a pulse-echo interval. For motion detection, the sensors operate by staring at a fixed range and then sensing any change in the averaged radar reflectivity at that range. A sampling gate is opened at a fixed delay after the emission of a transmit pulse. The resultant sampling gate output is averaged over repeated pulses. Changes in the averaged sampling gate output represent changes in the radar reflectivity at a particular range, and thus motion. 15 figs.

  9. Renewable energy annual 1997. Volume 1

    SciTech Connect

    1998-02-01

    This report presents information on renewable energy consumption, capacity, and electricity generation data, as well as data on US solar thermal and photovoltaic collector manufacturing activities. The renewable energy resources included in the report are: biomass (wood, ethanol, and biodiesel); municipal solid waste; geothermal; wind; and solar (solar thermal and photovoltaic). The first chapter of the report provides an overview of renewable energy use and capability from 1992 through 1996. It contains renewable energy consumption, capacity, and electricity generation data, as well as descriptive text. Chapter 2 presents current (through 1996) information on the US solar energy industry. A glossary of renewable energy terms is also included. 15 figs., 42 tabs.

  10. Algebraic calculation of stroboscopic maps of ordinary, nonlinear differential equations

    SciTech Connect

    Wackerbauer, R. ); Huebler, A. . Center for Complex Systems Research); Mayer-Kress, G. California Univ., Santa Cruz, CA . Dept. of Mathematics)

    1991-07-25

    The relation between the parameters of a differential equation and corresponding discrete maps are becoming increasingly important in the study of nonlinear dynamical systems. Maps are well adopted for numerical computation and several universal properties of them are known. Therefore some perturbation methods have been proposed to deduce them for physical systems, which can be modeled by an ordinary differential equation (ODE) with a small nonlinearity. A new iterative, rigorous algebraic method for the calculation of the coefficients of a Taylor expansion of a stroboscopic map from ODE's with not necessarily small nonlinearities is presented. It is shown analytically that most of the coefficients are small for a small integration time and grow slowly in the course of time if the flow vector field of the ODE is polynomial and if the ODE has fixed point in the origin. Approximations of different orders respectively of the rest term are investigated for several nonlinear systems. 31 refs., 16 figs.

  11. Consequences of pipe ruptures in metal fueled, liquid metal cooled reactors

    SciTech Connect

    Dunn, F.E.

    1990-01-01

    The capability to simulate pipe ruptures has recently been added to the SASSYS-1 LMR systems analysis code. Using this capability, the consequences of severe pipe ruptures in both loop-type and pool-type reactors using metal fuel were investigated. With metal fuel, if the control rods scram then either type of reactor can easily survive a complete double-ended break of a single pipe; although, as might be expected, the consequences are less severe for a pool-type reactor. A pool-type reactor can even survive a protected simultaneous breaking of all of its inlet pipes without boiling of the coolant or melting of the fuel or cladding. 2 refs., 16 figs., 1 tab.

  12. Alpha-beta radiation detector

    DOEpatents

    Fleming, D.M.; Simmons, K.L.; Froelich, T.J.; Carter, G.L.

    1998-08-18

    The invention is based in part on the discovery that a plastic housing that is lightweight is surprisingly efficient inasmuch as background signals from any gamma radiation are significantly reduced by using a plastic housing instead of a metal housing. A further aspect of the present invention is the profile of the housing as a bi-linear approximation to a parabola resulting in full optical response from any location on the scintillation material to the photomultiplier tube. A yet further aspect of the present invention is that the survey probe is resistant to magnetic fields. A yet further aspect of the present invention is the use of a snap-fit retaining bracket that overcomes the need for multiple screws. 16 figs.

  13. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    SciTech Connect

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  14. A study of the propagation of ulf electromagnetic fields in collisional, inhomogeneous, magnetized plasmas

    SciTech Connect

    Borovsky, J.E.

    1987-02-01

    The propagation of ultralow-frequency (ulf) electromagnetic signals (Alfven and magnetosonic waves) in collisional, inhomogeneous, magnetized plasmas is analyzed by numerical simulation. The problem is formulated from a Maxwell-equation orbit-theory approach rather than from a magnetohydrodynamic point of view, and the problem is numerically treated in a fully time-dependent manner. Boundary-value-problem behavior is distinguished from initial-value-problem behavior. The propagation of two-dimensional small-amplitude electromagnetic disturbances in plasmas with spatially dependent densities and in plasmas with spatially dependent conductivities is numerically simulated, and when possible, the simulations are compared with theory. Changes in the plasma density lead to changes in the signal speed and to reflections; collisions lead to changes in the signal speed, to reflections, and to attenuations. Theoretical descriptions based upon discontinuities in the media are generally incorrect in predicting the amplitudes of signals reflected from plasma inhomogeneities. 19 refs., 16 figs.

  15. Oak Ridge Reservation environmental report for 1989

    SciTech Connect

    Jacobs, V.A.; Wilson, A.R.

    1990-10-01

    The first two volumes of this report are devoted to a presentation of environmental data and supporting narratives for the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) and surrounding environs during 1989. Volume 1 includes all narrative descriptions, summaries, and conclusions and is intended to be a stand-alone'' report for the ORR for the reader who does not want to review in detail all of the 1989 data. Volume 2 includes the detailed data summarized in a format to ensure that all environmental data are represented in the tables. Narratives are not included in Vol. 2. The tables in Vol. 2 are addressed in Vol. 1. For this reason, Vol. 2 cannot be considered a stand-alone report but is intended to be used in conjunction with Vol. 1. 16 figs., 194 tabs.

  16. Uncooled two-stroke gas engine for heat pump drive

    SciTech Connect

    Badgley, P.; McNulty, D.; Woods, M.

    1990-01-01

    This paper describes the design and analysis of a family of natural gas fueled, uncooled, two-stroke, lean burn, thermal-ignition engines. The engines were designed specifically to meet the requirements dictated by the commercial heat pump application. The engines have a power output ranging from 15 to 100 kW; a thermal efficiency of 36 percent; a mean time between failure greater than 3 years; and a life expectancy of 45,000 hours. To meet these specifications a family of very simple, uncooled, two-stroke cycle engines were designed which have no belts, gears or pumps. The engines utilize crankcase scavenging, lubrication, stratified fuel introduction to prevent raw fuel from escaping with the exhaust gas, use of and ceramic rolling contact bearings. The Thermal Ignition Combustion System (TICS) is used for ignition to enable the engines to operate with a lean mixture and eliminate spark plug erosion. 4 refs., 16 figs.

  17. Oil and gas developments in the Far East in 1987

    SciTech Connect

    Courteney, S.; Soeparjadi, R.A.; Ahmad, S.M.S.

    1988-10-01

    As a result of the stabilization of oil prices in 1987 following their collapse in 1986, the rate of slowdown in Far East exploration activities began to ease. Seismic acquisition increased slightly, and the fall in exploratory drilling was less dramatic in 1987 than in 1986. No major discoveries were reported during 1987, although small-to-medium-size oil and gas discoveries added to the potential reserves of Bangladesh, India, Indonesia, Japan, People's Republic of China, Pakistan, Republic of China, and Thailand. Development drilling continued to rise by a modest amount. Far East oil and condensate production decreased in 1987 by just over 1% to 5.37 million b/d, whereas gas output rose to 11.7 bcf/day. New acreage awards were significantly higher in 1987 than in 1986, particularly in some of the region's key producing countries. 16 figs., 11 tabs.

  18. Mechanical swirler for a low-NO{sub x}, weak-swirl burner

    DOEpatents

    Cheng, R.K.; Yegian, D.T.

    1999-03-09

    Disclosed is a mechanical swirler for generating diverging flow in lean premixed fuel burners. The swirler of the present invention includes a central passage with an entrance for accepting a feed gas, a flow balancing insert that introduces additional pressure drop beyond that occurring in the central passage in the absence of the flow balancing insert, and an exit aligned to direct the feed gas into a combustor. The swirler also has an annular passage about the central passage and including one or more vanes oriented to impart angular momentum to feed gas exiting the annular passage. The diverging flow generated by the swirler stabilizes lean combustion thus allowing for lower production of pollutants, particularly oxides of nitrogen. 16 figs.

  19. Health effects of air pollution due to coal combustion in the Chestnut Ridge region of Pennsylvania

    SciTech Connect

    Batterman, S.; Golomb, D.

    1985-08-01

    This study used the seventeen monitor air quality network in the Chestnut Ridge region of Pennsylvania to evaluate the effect of pollutant trends and representations on measures of exposure. Data consisted of four and five years of SO/sub 2/ and TSP measurements, respectively, and were considered in deriving exposure models. A cross-sectional study of 4071 children aged 6 to 11 years of age was conducted in the spring of 1979. Standardized children's questionnaires were distributed to the parents and returned by the children to school, where spirometry was performed. The region was divided into low, moderate and high pollution areas on the basis of the 1974-1978, 3 h, 24 h, and annual averages for SO/sub 2/. After adjusting the respiratory symptom response outcomes and the pulmonary function levels for known predictors, no significant association was noted for level of SO/sub 2/. 65 refs., 16 figs., 19 tabs.

  20. Trends in radionuclide concentrations for selected wildlife and food products near the Hanford Site from 1971 through 1988

    SciTech Connect

    Eberhardt, L.E.; Cadwell, L.L.; Price, K.R.; Carlile, D.W.; Alaska Dept. of Fish and Game, Juneau, AK )

    1989-09-01

    From 1971 through 1988 at least 40 species of wildlife and 27 different types of food products were collected and analyzed for radionuclides as part of the Pacific Northwest Laboratory (PNL) Environmental Monitoring Program. This report summarizes the results of these analyses for sample types collected for all or most of the 18-year period. The objectives of this summary investigation were to identify long-term trends or significant year-to-year changes in radionuclide concentrations and, if possible, relate any observed changes in radionuclide concentrations to their sources and probable causes. Statistical techniques were employed to test for long-term trends. Conspicuous short-term changes in radionuclide concentrations were identified from inspection of the data. 30 refs., 16 figs., 4 tabs.

  1. Low-cost CuInSe{sub 2} submodule development. Final subcontract report, 9 July 1990--31 January 1992

    SciTech Connect

    Basol, B.M.; Kapur, V.K.; Halani, A.; Leidholm, C.

    1992-10-01

    Aim of this project is development and demonstration of processing steps necessary for fabrication of high efficiency CuInSe{sub 2} solar cells and sub-modules by the two-stage technique (also called the selenization method.) During this period, we have optimized the processing parameters of this method and demonstrated CuInSe{sub 2}/CdS/ZnO devices with a 1{endash}4 cm{sup 2} area and up to 12.4% active area efficiency. We have also developed a novel approach for the preparation of Cu/In precursors that improved the stoichiometric and morphological uniformity in these films. We have developed processing steps and tooling for handling up to 1 ft{sup 2} size substrates and as a result of these efforts demonstrated our first monolithically integrated sub-module of 1 ft{sup 2} area. 16 figs, 1 tab, 15 refs.

  2. Recent advances in flue gas desulfurization technologies

    SciTech Connect

    Pan, Y.S.

    1991-01-01

    Recent advances in flue gas desulfurization (FGD) technologies are reported. The technological advances include conventional wet FGD system improvements, advanced wet FGD system development, spray dryer system operations, technologies for furnace sorbent injections, post-combustion dry technologies, combined SO{sub 2}/NO{sub x} technologies, and several emerging FGD technologies. In addition, progress of by-product utilization that affects the operating cost of FGD systems is described. Economics of some commercially available and nearly maturing FGD technologies is also discussed. The materials included in this report are obtained from technical presentations made through September 1990, at several national and international conferences. This report is intended to document current advances and status of various FGD technologies. 101 refs., 16 figs.

  3. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1997-12-09

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  4. Remote information service access system based on a client-server-service model

    DOEpatents

    Konrad, A.M.

    1996-08-06

    A local host computing system, a remote host computing system as connected by a network, and service functionalities: a human interface service functionality, a starter service functionality, and a desired utility service functionality, and a Client-Server-Service (CSS) model is imposed on each service functionality. In one embodiment, this results in nine logical components and three physical components (a local host, a remote host, and an intervening network), where two of the logical components are integrated into one Remote Object Client component, and that Remote Object Client component and the other seven logical components are deployed among the local host and remote host in a manner which eases compatibility and upgrade problems, and provides an illusion to a user that a desired utility service supported on a remote host resides locally on the user`s local host, thereby providing ease of use and minimal software maintenance for users of that remote service. 16 figs.

  5. Effects of neutron irradiation on thermal conductivity of SiC-based composites and monolithic ceramics

    SciTech Connect

    Senor, D.J.; Youngblood, G.E.; Moore, C.E.; Trimble, D.J.; Newsome, G.A.; Woods, J.J.

    1996-12-31

    A variety of SiC-based composites and monolithic ceramics were characterized by measuring their thermal diffusivity in the unirradiated, thermal annealed, and irradiated conditions over the temperature range 400 to 1000{degree}C. The irradiation was conducted in the FBR-II to doses of 33 and 43 dpa-SiC at a nominal temperature of 1000{degree}C. The annealed specimens were held at 1010{degree}C for 165 days to approximately duplicate the thermal exposure of the irradiated specimens. Thermal diffusivity was measured using the laser flash method, and was converted to thermal conductivity using density data and calculated specific heat values. 24 refs., 16 figs., 1 tab.

  6. ITER equilibrium with bootstrap currents, lower hybrid current drive and fast wave current drive

    SciTech Connect

    Ehst, D.A.

    1989-03-01

    A current drive system is proposed for the technology phase of ITER which relies on rf power and bootstrap currents. The rf/bootstrap system permits operation at high safety factor, and we consider the axial value to be q/sub a/ approx. = 1.9, which minimizes the need for seed current near the magnetic axis. Lower hybrid power (/approximately/30 MW) provides current density near the surface, ICRF (/approximately/65 MHz, /approximately/30 MW) fast waves generate current near the axis, and high frequency fast waves (/approximately/250 MHz, /approximately/74 MW) supply the remaining current density. The system is not yet optimized but appears to offer great flexibility (ion heating for ignition, current rampup, etc.) with relatively inexpensive and well developed technology. 29 refs., 16 figs., 1 tab.

  7. A haptic system for a multifingered hand

    SciTech Connect

    Stansfield, S.A.

    1990-01-01

    In this paper we present a series of haptic exploratory procedures, or EPs, implemented for a multi-fingered, articulated, sensate robot hand. These EPs are designed to extract specific tactile and kinesthetic information from an object via their purposive invocation by an intelligent robotic system. Taken together, they form an active robotic touch perception system to be used both in extracting information about the environment for internal representation and in acquiring grasps for manipulation. The haptic system presented utilizes an integrated robotic system consisting of a PUMA 560 robot arm, a JPL/Stanford robot hand, with joint torque sensing in the fingers, a wrist force/torque sensor, and a 256 element, spatially-resolved fingertip tactile array. We describe the EPs implemented for this system and provide experimental results which illustrate how they function. A final example demonstrates how the information extracted may be used. 13 refs., 16 figs.

  8. New economic cost perspectives for valuing solar technologies

    SciTech Connect

    Awerbuch, S.

    1995-12-31

    Utility planning models evaluate alternative resource options using engineering oriented, discounted-cash-flow (DCF) methodologies to find least-cost options. Although DCF has been widely used for decades, recent capital budgeting experience in manufacturing suggests that more sophisticated procedures are required for comparing passive, capital intensive solar technologies to expense-intensive fossil generation. DCF techniques, which ignore financial risk, have a dismal record for correctly valuing new manufacturing process technologies such as robotics and computer-integrated manufacturing, in part because the benefits cannot be easily measured using traditional accounting concepts. This paper illustrates the application of capital-market theory to the valuation of conventional fossil resources as well as photovoltaics (PV). The paper also explores the importance of technological progress and critically examines the widespread practice of evaluating energy technologies on the basis of their levelized costs. 73 refs., 16 figs., 18 tabs.

  9. An aerial radiological survey of the West Valley Demonstration Project and surrounding area, West Valley, New York

    SciTech Connect

    Berry, H.A.

    1991-09-01

    An aerial radiological survey of the West Valley Demonstration Project and the surrounding area was conducted from mid-August through early September 1984 by EG G Energy Measurements, Inc. for the United States Department of Energy. The radiological survey was part of the United States Department of Energy Comprehensive Integrated Remote Sensing (CIRS) program, which provides state-of-the-art remote sensing to support the needs of the various DOE facilities. The survey consisted of airborne measurements of both natural and man-made gamma radiation emanating from the terrestrial surface. These measurements allowed an estimate of the distribution of isotopic concentrations in the area surrounding the project site. Results are reported as isopleths superimposed on aerial photographs of the area. Gamma ray energy spectra are also presented for the net man-made radionuclides. 8 refs., 16 figs., 9 tabs.

  10. Evaluation of thermal remote sensing as a low-cost regional geothermal exploration technique in New Mexico. Final report

    SciTech Connect

    Inglis, M.; Budge, T.K.

    1985-03-01

    Airborne and satellite borne thermal infrared scanner data were analyzed for application in the exploration of geothermal resources in New Mexico. The location for this study was the East Mesa Geothermal Field near Las Cruces, New Mexico. Primary sensor was the Thermal Infrared Multispectral Scanner (TIMS) which obtained data at 10-meter resolution. Additional data for comparison came from the Heat Capacity Mapping Mission (HCMM) satellite which provided data at 600-meter resolution. These data were compared to the soils, vegetation, and geology of the area, as well as borehole temperature data in an attempt to explain temperature patterns and anomalies. Thermal infrared scanner data were found to be too sensitive to solar-induced temperature anomalies to directly reflect the presence of subsurface geothermal anomalies but may provide valuable supporting information for a geothermal exploration program. 15 refs., 16 figs., 3 tabs.

  11. Bounded multi-scale plasma simulation: Application to sheath problems

    SciTech Connect

    Parker, S.E. ); Friedman, A.; Ray. S.L. ); Birdsall, C.K. )

    1993-08-01

    In our previous paper we introduced the multi-scale method, a self-consistent plasma simulation technique that allowed particles to have independent timesteps. Here we apply the method to one-dimensional electrostatic bounded plasma problems and demonstrate a significant reduction in computing time. We describe a technique to allow for variable grid spacing and develop consistent boundary conditions for the direct implicit method. Also discussed are criteria for specifying timestep size as a function of position in phase space. Next, an analytically solvable sheath problem is presented, and a comparison to simulation results in made. Finally, we show results for an ion acoustic shock front propagating toward a conducting wall. 20 refs., 16 figs., 2 tabs.

  12. Experiment-specific analyses in support of code development

    SciTech Connect

    Ott, L.J.

    1990-01-01

    Experiment-specific models have been developed since 1986 by Oak Ridge National Laboratory Boiling Water Reactor (BWR) severe accident analysis programs for the purpose of BWR experimental planning and optimum interpretation of experimental results. These experiment-specific models have been applied to large integral tests (ergo, experiments) which start from an initial undamaged core state. The tests performed to date in BWR geometry have had significantly different-from-prototypic boundary and experimental conditions because of either normal facility limitations or specific experimental constraints. These experiments (ACRR: DF-4, NRU: FLHT-6, and CORA) were designed to obtain specific phenomenological information such as the degradation and interaction of prototypic components and the effects on melt progression of control-blade materials and channel boxes. Applications of ORNL models specific to the ACRR DF-4 and KfK CORA-16 experiments are discussed and significant findings from the experimental analyses are presented. 32 refs., 16 figs.

  13. Phenodynamics of production and chemical pools in mayapple and flowering dogwood

    SciTech Connect

    Taylor, F.G. Jr.

    1991-01-01

    The objective of this study is to provide an understanding of the seasonality of biomass production and chemical storage among selected forest species as an aid to the analysis and management of a forest ecosystem model. The specific goals to accomplish the objectives included: (1) the construction of phenological calendars to be superimposed on the civil calendar, such that the seasons of the year are not marked by calendar dates but rather by dated groups of phenological events; (2) to develop a capability to predict onset of the generative phase (flowering) from heat unit summation methods; (3) to illustrate the role of phenology to biomass production and chemical storage in two indicator species, mayapple and flowering dogwood; and (4) to develop the capability to predict aboveground and below ground standing crop biomass in dogwood. Observations in this study focused on the generative phases (flowering) of individual plants and colonies of plants as indicators of productivity. 16 figs., 11 tabs.

  14. Rubber-modified epoxies: Analysis of the phase-separation process

    SciTech Connect

    Verchere, D.; Sautereau, H.; Pascault, J.P.; Moschiar, S.M.; Riccardi, C.C.; Williams, R.J.J.

    1993-12-31

    The phase-separation process of a diepoxide based on bisphenol A diglycidyl ether cured with a cycloaliphatic diamine in the presence of an epoxy-terminated butadiene-acrylonitrile random copolymer (ETBN) was experimentally studied and theoretically simulated. The increase in the average molecular weight of the epoxy-amine polymer is shown to be the main thermodynamic factor leading to phase separation. The competition between nucleation-growth and spinodal decomposition is analyzed. Low values of interfacial tensions and polymerization rates favor the first mechanism in most cases. A secondary phase separation must occur inside the dispersed particles, leading to a segregated epoxy-amine phase. The theoretical simulation explains the increase of the average diameter of dispersed-phase particles with increasing polymerization temperature. The volume fraction of dispersed phase is the dominating factor affecting fracture toughness. 49 refs., 16 figs.

  15. Toughening epoxy resin with poly(methyl methacrylate)-grafted natural rubber

    SciTech Connect

    Rezaifard, A.H.; Hodd, K.A.; Barton, J.M.

    1993-12-31

    A novel rubber, poly(methyl methacrylate)-g-natural rubber (Hevea-plus MG), has been studied as a toughening agent for bisphenol A diglycidyl ether (Shell 828 epoxy resin) cured with piperidine. Effective dispersions of the rubber, in concentrations of 2-10 parts per hundred parts resin, were achieved by adjusting the solubility parameter of the epoxy to approximate that of poly(methyl methacrylate) by adding bisphenol A. The fracture energy of the rubber-modified resin was determined by compact tension tests (in the temperature range -60 to +40{degrees}C) and by Charpy impact tests. The poly(methyl methacrylate)-g-natural rubber was found to be an effective toughening agent for the epoxy resin at both low and high rates of strain. Possible fracture mechanisms are discussed. 22 refs., 16 figs., 5 tabs.

  16. Systems report on the analysis of spent, highly enriched U-235 reactor fuel by delayed neutron interrogation

    SciTech Connect

    Piper, T.C.; Kirkham, R.J.

    1990-05-01

    Design aspects are briefly given of a neutron source shuffler used to measure fissile material content of spent, highly enriched reactor fuel. The mode of operation used, results of analyzing 176 fuel packages and recommended system improvements are discussed. Four measurements were made on each of the fuel packages with the mean of the 176 standard deviations being 2.03 percent of value. The maximum individual standard deviation was 9.27 percent. Appendixes concerning imprecisions introduced by counting statistics and crane speed irregularities are given. Use of an improved neutron source shuffler, an improved fuel package motion system and modernized computer system should permit system performance to be limited mainly by counting statistics, to about 1.5 percent of measured value. A stronger source could then be installed to further enhance system operation. 16 figs., 3 tabs.

  17. Carrier transport and collection in fully depleted semiconductors by a combined action of the space charge field and the field due to electrode voltages

    DOEpatents

    Rehak, P.; Gatti, E.

    1987-08-18

    A semiconductor charge transport device and method for making same are disclosed, characterized by providing a thin semiconductor wafer having rectifying junctions on its opposing major surfaces and including a small capacitance ohmic contact, in combination with bias voltage means and associated circuit means for applying a predetermined voltage to effectively deplete the wafer in regions thereof between the rectifying junctions and the ohmic contact. A charge transport device of the invention is usable as a drift chamber, a low capacitance detector, or a charge coupled device each constructed according to the methods of the invention for making such devices. Detectors constructed according to the principles of the invention are characterized by having significantly higher particle position indicating resolution than is attainable with prior art detectors, while at the same time requiring substantially fewer readout channels to realize such high resolution. 16 figs.

  18. Method of holding optical elements without deformation during their fabrication

    DOEpatents

    Hed, P.P.

    1997-04-29

    An improved method for securing and removing an optical element to and from a blocking tool without causing deformation of the optical element is disclosed. A lens tissue is placed on the top surface of the blocking tool. Dots of UV cement are applied to the lens tissue without any of the dots contacting each other. An optical element is placed on top of the blocking tool with the lens tissue sandwiched therebetween. The UV cement is then cured. After subsequent fabrication steps, the bonded blocking tool, lens tissue, and optical element are placed in a debonding solution to soften the UV cement. The optical element is then removed from the blocking tool. 16 figs.

  19. The effects of viscous forces on three-phase relative permeability

    SciTech Connect

    Maloney, D.R.; Mahmood, S.M.; Honarpour, M.M.

    1989-04-01

    The overall objective of Three-Phase Relative Permeability Project (BE9) is to develop guidelines for improving the accuracy of three-phase relative permeability determinations. This report summarizes previous studies and explains the progress made at NIPER on studying the effect of variations in viscous forces on three-phase relative permeabilities by changing the viscosity of both wetting and nonwetting phases. Significant changes were observed due to viscosity variations. An increase in oil viscosity reduced the relative permeability to gas; an increase in brine/(wetting-phase) viscosity reduced the relative permeability to brine. A slight increase in gas relative permeability was also observed. These observations suggest that the viscosities of both oil and water influence three-phase permeability data. During this study, data scatter was sometimes encountered which was comparable to that of published results. The causes of this scatter are outlined in this report and remedial attempts are discussed. 20 refs., 16 figs., 5 tabs.

  20. An evaluated neutronic data file for elemental cobalt

    SciTech Connect

    Guenther, P.; Lawson, R.; Meadows, J.; Sugimoto, M.; Smith, A.; Smith, D.; Howerton, R.

    1988-08-01

    A comprehensive evaluated neutronic data file for elemental cobalt is described. The experimental data base, the calculational methods, the evaluation techniques and judgments, and the physical content are outlined. The file contains: neutron total and scattering cross sections and associated properties, (n,2n) and (n,3n) processes, neutron radiative capture processes, charged-particle-emission processes, and photon-production processes. The file extends from 10/sup /minus/5/ eV to 20 MeV, and is presented in the ENDF/B-VI format. Detailed attention is given to the uncertainties and correlations associated with the prominent neutron-induced processes. The numerical contents of the file have been transmitted to the National Nuclear Data Center, Brookhaven National Laboratory. 143 refs., 16 figs., 5 tabs.

  1. LaNi{sub 5}-based metal hydride electrode in Ni-MH rechargeable cells

    DOEpatents

    Bugga, R.V.; Fultz, B.; Bowman, R.; Surampudi, S.R.; Witham, C.K.; Hightower, A.

    1999-03-30

    An at least ternary metal alloy of the formula AB{sub (Z-Y)}X{sub (Y)} is disclosed. In this formula, A is selected from the rare earth elements, B is selected from the elements of Groups 8, 9, and 10 of the Periodic Table of the Elements, and X includes at least one of the following: antimony, arsenic, germanium, tin or bismuth. Z is greater than or equal to 4.8 and less than or equal to 6.0. Y is greater than 0 and less than 1. Ternary or higher-order substitutions to the base AB{sub 5} alloys that form strong kinetic interactions with the predominant metals in the base metal hydride are used to form metal alloys with high structural integrity after multiple cycles of hydrogen sorption. 16 figs.

  2. Separation, fractionation concentration and drying of food products

    SciTech Connect

    Merlo, C.A.; Rose, W.W.; Pedersen, L.D.

    1989-08-01

    Tomato juice fractions and paste produced in an On-Site Study were subjected to a storage study. The fractions and paste were evaluated initially before storage, made into control and recombined purees, and the purees were evaluated. The purees were similar in viscosity, differed somewhat in color and syneresis. The paste and concentrated serum were stored 3 months at 40, 70, 90{degree}F; the pulp was frozen. After storage, control and recombined purees were made; the purees made from 70{degree}F stored paste or serum were thermally processed. These thermally processed purees were stored 3 months at 40, 70, 90{degree}F. After storage, the recombined purees stored at 70 and 90{degree}F showed a viscosity loss within 0.1--0.3 cm of the viscosity loss of the control purees. 19 refs., 16 figs., 20 tabs.

  3. Glow discharge techniques for conditioning high vacuum systems

    SciTech Connect

    Dylla, H.F.

    1988-03-01

    A review is given of glow discharge techniques which are useful for conditioning vacuum vessels for high vacuum applications. Substantial development of glow discharge techniques has been done for the purpose of in-situ conditioning of the large ultrahigh vacuum systems for particle accelerators and magnetic fusion devices. In these applications the glow discharge treatments remove impurities from vessel surfaces in order to minimize particle-induced desorption coefficients. Cleaning mechanisms involve a mixture of sputtering and ion- (or neutral) induced desorption effects depending on the gas mixture (ArO/sub 2/ vs. H/sub 2/) and excitation method (DC, RF, and ECR). The author will review the methodology of glow discharge conditioning, diagnostic measurements provided by residual gas and surface composition analysis, and applications to vessel conditioning and materials processing. 76 refs., 16 figs.

  4. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, K.C.

    1992-12-08

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion. 16 figs.

  5. Natural gas monthly, October 1991

    SciTech Connect

    Not Available

    1991-11-05

    The Natural Gas Monthly (NGM) is prepared in the Data Operations Branch of the Reserves and Natural Gas Division, Office of Oil and Gas, Energy Information Administration (EIA), US Department of Energy (DOE). The NGM highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. The data in this publication are collected on surveys conducted by the EIA to fulfill its responsibilities for gathering and reporting energy data. Some of the data are collected under the authority of the Federal Energy Regulatory Commission (FERC), an independent commission within the DOE, which has jurisdiction primarily in the regulation of electric utilities and the interstate natural gas industry. Geographic coverage is the 50 States and the District of Columbia. 16 figs., 33 tabs.

  6. Scrap tire recycling: Promising high value applications. Final report

    SciTech Connect

    Bauman, B.D.; Leskovyansky, P.J.; Drela, H.

    1993-11-01

    Surface modification of scrap tire rubber (rubber particles treated with chlorine gas) show promise for ameliorating the scrap tire problem (the treated rubber can be used as a component in high- performance, expensive polymer systems). The process has been proven in Phase I. Phase II covers market/applications, process development (Forberg-design mixer reactor was chosen), plant design, capital cost estimate, economics environmental/safety/health, and energy impact. Almost of the small amount of chlorine is consumed. The capital costs for a rubber particle treatment facility are attractive, being at least two orders of magnitude less than that of facilities for making new polymer materials. Large volume markets using treated rubber are needed. The amount of scrap rubber available is small compared to the polymers available for replacement. 7 tabs, 16 figs.

  7. Technical support for geopressured-geothermal well activities in Louisiana

    SciTech Connect

    Not Available

    1991-07-01

    Continuous recording microearthquake monitoring networks have been established around US Department of Energy (DOE) geopressured-geothermal design wells in southwestern Louisiana and southeastern Texas since summer 1980 to assess the effects well development may have had on subsidence and growth-fault activation. This monitoring has shown several unusual characteristics of Gulf Coast seismic activity. The observed activity is classified into two dominant types, one with identifiable body phases (type 1) and the other with only surface-wave signatures (type 2). During this reporting period no type 1 or body-wave events were reported. A total of 230 type 2 or surface-wave events were recorded. Origins of the type 2 events are still not positively understood; however, little or no evidence is available to connect them with geopressured-geothermal well activity. We continue to suspect sonic booms from military aircraft or some other human-induced source. 37 refs., 16 figs., 6 tabs.

  8. Spent nuclear fuel removal program at the West Valley Demonstration Project: Topical report

    SciTech Connect

    Connors, B. J.; Golden, M. P.; Valenti, P. J.; Winkel, J. J.

    1987-03-01

    The spent nuclear fuel removal program at the West Valley Demonstration Project (WVDP) consisted of removing the spent nuclear fuel (SNF) assemblies from the storage pool in the plant, loading them in shielded casks, and preparing the casks for transportation. So far, four fuel removal campaigns have been completed with the return of 625 spent nuclear fuel assemblies to their four utility owners. A fifth campaign, which is not yet completed, will transfer the remaining 125 fuel assemblies to a government site in Idaho. A spent fuel rod consolidation demonstration has been completed, and the storage canisters and their racks are being removed from the fuel receiving and storage pool to make way for installation of the size reduction equipment. A brief history of the West Valley reprocessing plant and the events leading to the storage and ownership of the spent nuclear fuel assemblies and their subsequent removal from West Valley are also recorded as background information. 3 refs., 16 figs., 9 tabs.

  9. Feasibility study for a transportation operations system cask maintenance facility

    SciTech Connect

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  10. Simulation studies for design optimisation of a scintillator plate calorimeter

    SciTech Connect

    Proudfoot, J.; Job, P.K.; Trost, H.J. ); Handler, T. ); Gabriel, T. )

    1990-01-01

    Results on simulations studies relating to the optimisation of a sampling scintillator plate calorimeter for an SSC detector system are presented. These studies show that whereas a compensating sampling geometry can be obtained using a variety of configurations using either lead or depleted uranium as the principal absorber, no configuration based on a pure iron absorber is compensating. Unlike in a lead system, delayed energy release from long lived shower products produced in a uranium system pose a serious pile up problem. Therefore we advocate the use of lead as the principal absorber in this calorimeter. Work on optimisation of the mechanical structure is in progress and results are presented on issues such as structural support, tolerances and on the degradation in response due to other detector material within the volume of the calorimeter. 8 refs., 16 figs.

  11. Fractionally distilled SRC-I, SRC-II, EDS, H-Coal and ITSL direct coal liquefaction process materials: a comparative summary of chemical analysis and biological testing

    SciTech Connect

    Wright, C.W.; Later, D.W.; Dauble, D.D.; Wilson, B.W.

    1985-07-01

    This document reports and compares the results compiled from chemical analyses and biological testing of coal liquefaction process materials which were fractionally distilled, after production, into various comparable boiling-point range cuts. Comparative analyses were performed on solvent refined coal (SRC)-I, SRC-II, H-Coal, EDS an integrated two-stage liquefaction (ITSL) distillate materials. Mutagenicity and carcinogenicity assays were conducted in conjunction with chromatographic and mass spectrometric analyses to provide detailed, comparative, chemical and biological assessments. Where possible, results obtained from the distillate cuts are compared to those from coal liquefaction materials with limited boiling ranges. Work reported here was conducted by investigators in the Biology and Chemistry Department at the Pacific Northwest Laboratory (PNL), Richland, WA. 38 refs., 16 figs., 27 tabs.

  12. The role of pre-equilibrium theory in nuclear data evaluation

    SciTech Connect

    Blann, M.

    1987-08-01

    We illustrate the utility of preequilibrium plus equilibrium decay models in reproducing neutron and ..gamma..-ray spectra for incident nucleons of approx. = 2 to 20 MeV. We discuss models and theories for calculating preequilibrium nucleon angular distributions and the short comings involved. Attention is focussed on special problems in modelling preequliibrium reactions for target nuclei near shell closures, and possible ways to improve the modelling in these regimes by use of shell model levels to generate few quasi-particle state densities. We show preliminary tests of applicability of preequilibrium models to incident nucleon energies up to 1 GeV and for heavy ion induced reactions at energies up to 300 MeV, areas where modern technology is increasingly seeking nuclear data input. 40 refs., 16 figs.

  13. Effects of coal rank on the chemical composition and toxicological activity of coal liquefaction materials

    SciTech Connect

    Wright, C.W.; Dauble, D.D.

    1986-05-01

    This report presents data from the chemical analysis and toxicological testing of coal liquefaction materials from the EDS and H-Coal processes operated using different ranks of coal. Samples of recycle solvent from the bottoms recycle mode of the EDS direct coal liquefaction process derived from bituminous, sub-bituminous, and lignite coals were analyzed. In addition, the H-Coal heavy fuel oils derived from bituminous and sub-bituminous coals were analyzed. Chemical methods of analysis included adsoprtion column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, and low-voltage probe-inlet mass spectrometry. The toxicological activity of selected samples was evaluated using the standard microbial mutagenicity assay, an initiation/promotion assay for mouse-skin tumorigenicity, and a static bioassy with Daphnia magna for aquatic toxicity of the water-soluble fractions. 22 refs., 16 figs., 14 tabs.

  14. Theory-based transport simulations of TFTR L-mode temperature profiles

    SciTech Connect

    Bateman, G.

    1991-10-24

    The temperature profiles from a selection of TFTR L-mode discharges are simulated with the 1-1/2-D BALDUR transport code using a combination of theoretically derived transport models, called the Multi-Mode Model. The present version of the Multi-Mode Model consists of effective thermal diffusivities resulting from trapped electron modes and ion temperature gradient ({eta}{sub i}) modes, which dominate in the core of the plasma, together with resistive ballooning modes, which dominate in the periphery. Within the context of this transport model and the TFTR simulations reported here, the scaling of confinement with heating power comes from the temperature dependence of the {eta}{sub i} and trapped electron modes, while the scaling with current comes mostly from resistive ballooning modes. 24 refs., 16 figs., 3 tabs.

  15. Monitoring of Downstream Salmon and Steelhead at Federal Hydroelectric Facilities, 1996 Annual Report.

    SciTech Connect

    Martinson, Rick D.; Kamps, Jeffrey W.; Graves, Ritchie J.

    1997-08-01

    The seaward migration of juvenile salmonids was monitored by the National Marine Fisheries Service (NMFS) at Bonneville and John Day Dams on the Columbia River in 1996 The NMFS Smolt Monitoring Project is part of a larger Smolt Monitoring Program (SMP) coordinated by the Fish Passage Center (FPC) for the Columbia Basin Fish and Wildlife Authority. The purpose of the SMP is to monitor the migration of the juvenile salmonid stocks in the Columbia basin and make flow and spill recommendations designed to facilitate fish passage. Data are also used for travel time, migration timing, and relative run size analysis. The purpose of the NMFS portion of the program is to provide the FPC with species and project specific real time data from John Day and Bonneville Dams. Monitoring data collected included: river conditions; total numbers of fish; numbers of fry, adult salmon, and incidental catch; daily and seasonal passage patterns; and fish condition. 10 refs., 16 figs., 5 tabs.

  16. Fixed-bed gasification research using US coals. Volume 17. Gasification and liquids recovery of four US coals

    SciTech Connect

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-12-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and government agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) group. This report is the seventeenth in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This report describes the gasification and pyrolysis liquids recovery test for four different coals: Illinois No. 6, SUFCO, Indianhead lignite, and Hiawatha. This test series spanned from July 15, 1985, through July 28, 1985. 4 refs., 16 figs., 19 tabs.

  17. Fixed-bed gasification research using US coals. Volume 5. Gasification of Stahlman Stoker bituminous coal

    SciTech Connect

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-03-31

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the fifth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of Stahlman Stoker bituminous coal from Clarion County, PA. The period of the gasification test was April 30 to May 4, 1983. 4 refs., 16 figs., 10 tabs.

  18. Surface decontamination of Type 304L stainless steel with electrolytically generated hydrogen: Design and operation of the electrolyzer

    SciTech Connect

    Bellanger, G. )

    1993-11-01

    The surface of tritiated Type 304L stainless steel is decontaminated by isotopic exchange with the hydrogen generated in an electrolyzer. This steel had previously been exposed to tritium in a tritium gas facility for several years. The electrolyzer for the decontamination uses a conducting solid polymer electrolyte made of a Nafion membrane. The cathode where the hydrogen is formed is nickel deposited on one of the polymer surfaces. This cathode is placed next to the region of the steel to be decontaminated. The decontamination involves, essentially, the tritiated oxide layers of which the initial radioactivity is [approximately] 5 kBq/cm[sup 2]. After treatment for 1 h, the decontamination factor is 8. 9 refs., 16 figs., 2 tabs.

  19. Constant field gradient planar coupled cavity structure

    DOEpatents

    Kang, Y.W.; Kustom, R.L.

    1999-07-27

    A cavity structure is disclosed having at least two opposing planar housing members spaced apart to accommodate the passage of a particle beam through the structure between the members. Each of the housing members have a plurality of serially aligned hollows defined therein, and also passages, formed in the members, which interconnect serially adjacent hollows to provide communication between the hollows. The opposing planar housing members are spaced and aligned such that the hollows in one member cooperate with corresponding hollows in the other member to form a plurality of resonant cavities aligned along the particle beam within the cavity structure. To facilitate the obtaining of a constant field gradient within the cavity structure, the passages are configured so as to be incrementally narrower in the direction of travel of the particle beam. In addition, the spacing distance between the opposing housing members is configured to be incrementally smaller in the direction of travel of the beam. 16 figs.

  20. Savannah River Laboratory Seepage Basins: Waste site assessment report

    SciTech Connect

    Haselow, J.S.; Looney, B.B.; Nichols, R.L.

    1989-09-05

    This Waste Site Assessment for the SRL Seepage Basins is the second in a series of documents being prepared to support development of an appropriate closure plan for these basins. The closure of these basins will be designed to provide protection to human health and the environment and to meet the provisions of the Consent Decree. A Technical Data Summary for these basins has already been submitted as part of the Consent Decree. This Site Assessment Report includes a waste site characterization, and a discussion of closure options for the basins. A closure option is recommended in this report, but details of the recommended closure are not provided in this report since they will be provided in a subsequent closure plan. The closure plan is the third document required under the Consent Decree. 18 refs., 16 figs., 10 tabs.

  1. Separation of non-hazardous, non-radioactive components from ICPP calcine via chlorination

    SciTech Connect

    Nelson, L.O.

    1995-05-01

    A pyrochemical treatment method for separating non-radioactive from radioactive components in solid granular waste accumulated at the Idaho Chemical Processing Plant was investigated. The goal of this study was to obtain kinetic and chemical separation data on the reaction products of the chlorination of the solid waste, known as calcine. Thermodynamic equilibrium calculations were completed to verify that a separation of radioactive and non-radioactive calcine components was possible. Bench-scale chlorination experiments were completed subsequently in a variety of reactor configurations including: a fixed-bed reactor (reactive gases flowed around and not through the particle bed), a packed/fluidized-bed reactor, and a packed-bed reactor (reactive gases flowed through the particle bed). Chemical analysis of the reaction products generated during the chlorination experiments verified the predictions made by the equilibrium calculations. An empirical first-order kinetic rate expression was developed for each of the reactor configurations. 20 refs., 16 figs., 21 tabs.

  2. Mathematical model for predicting the probability of acute mortality in a human population exposed to accidentally released airborne radionuclides. Final report for Phase I

    SciTech Connect

    Filipy, R.E.; Borst, F.J.; Cross, F.T.; Park, J.F.; Moss, O.R.; Roswell, R.L.; Stevens, D.L.

    1980-05-01

    A mathematical model was constructed for the purpose of predicting the fraction of human population which would die within 1 year of an accidental exposure to airborne radionuclides. The model is based on data from laboratory experiments with rats, dogs and baboons, and from human epidemiological data. Doses from external, whole-body irradiation and from inhaled, alpha- and beta-emitting radionuclides are calculated for several organs. The probabilities of death from radiation pneumonitis and from bone marrow irradiation are predicted from doses accumulated within 30 days of exposure to the radioactive aerosol. The model is compared with existing similar models under hypothetical exposure conditions. Suggestions for further experiments with inhaled radionuclides are included. 25 refs., 16 figs., 13 tabs.

  3. Mechanisms for selective agglomeration of coals

    SciTech Connect

    Wheelock, T.D.; Drzymala, J.; Allen, R.W.; Hu, Y.-C.; Tyson, D.; Xiaoping, Qiu; Lessa, A.

    1989-10-01

    Measurement and control of the surface properties of coal and pyrite are important in the application of selective oil agglomeration for coal beneficiation and both received further study and consideration. One method of surface characterization involves measuring the heat of immersion of coal in water or other liquids. To develop a useful and consistent measurement technique, numerous measurements were conducted with Illinois No. 6 coal to study the effects of coal particle size and moisture content on the heat of immersion in heptane, water, hexadecane and methanol. The effect of particle size was also studied. Also, ground mineral pyrite was pretreated with dilute solutions of sodium sulfide at various Ph and then agglomerated with heptane. To achieve better control over the oil agglomeration process, oil agglomeration experiments were conducted with aqueous suspensions of graphite which were first degassed with a vacuum pump. 7 refs., 16 figs., 2 tabs.

  4. Spontaneous emergence of a metabolism

    SciTech Connect

    Bagley, R.J.; Farmer, J.D. Santa Fe Inst., NM )

    1990-01-01

    Networks of catalyzed reactions with nonlinear feedback have been proposed to play an important role in the origin of life. We investigate this possibility in a polymer chemistry with catalyzed cleavage and condensation reactions. We study the properties of a well-stirred reactor driven away from equilibrium by the flow of mass. Under appropriate non-equilibrium conditions. The nonlinear feedback of the reaction network focuses the material of the system into a few specific polymer species. The network of catalytic reactions digests'' the material of its environment, incorporating it into its own form. We call the result an autocatalytic metabolism. Under some variations it persists almost unchanged, while in other cases it dies. We argue that the dynamical stability of autocatalytic metabolisms gives them regenerative properties that allow them to repair themselves and to propagate through time. 43 refs., 16 figs., 3 tabs.

  5. Dynamical processes in heavy ion reactions

    SciTech Connect

    Blann, M.; Remington, B.A.

    1988-07-25

    In this report I review the physical assumptions of the Boltzmann Master Equation (BME). Comparisons of the model with experimental neutron spectra gated on evaporation residues for a range of incident projectile energies and masses are presented; next, I compare n spectra gated on projectile-like fragments, followed by comparisons with ungated, inclusive proton spectra. I will then consider secondary effects from the nucleon-nucleon processes involved in the heavy ion relaxation processes, specifically the high energy ..gamma..-rays which have been observed at energies up to 140 MeV in collisions of heavy ions of 20/endash/84 MeV/..mu... Another secondary effect, subthreshold pion production, was covered in the XVII School and will not be repeated. 39 refs., 16 figs.

  6. Petroleum supply monthly, November 1996 with data for September 1996

    SciTech Connect

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  7. Two-dimensional water quality modeling of Town Creek embayment on Guntersville Reservoir

    SciTech Connect

    Bender, M.D.; Shiao, Ming C.; Hauser, G.E. . Engineering Lab.); Butkus, S.R. . Water Quality Dept.)

    1990-09-01

    TVA investigated water quality of Town Creek embayment using a branched two-dimensional model of Guntersville Reservoir. Simulation results were compared in terms of algal biomass, nutrient concentrations, and volume of embayment with depleted dissolved oxygen. Stratification and flushing play a significant role in the embayment water quality. Storms introduce large loadings of organics, nutrients, and suspended solids. Dissolved oxygen depletion is most severe after storms followed by low flow that fails to flush the embayment. Embayment water quality responses to potential animal waste and erosion controls were explored. Modeling indicated animal waste controls were much more cost-effective than erosion controls. Erosion controls will decrease embayment suspended solids and thereby increase algal biomass due to greater light penetration. 29 refs., 16 figs., 4 tabs.

  8. Processes to remove acid forming gases from exhaust gases

    DOEpatents

    Chang, S.G.

    1994-09-20

    The present invention relates to a process for reducing the concentration of NO in a gas, which process comprises: (A) contacting a gas sample containing NO with a gaseous oxidizing agent to oxidize the NO to NO[sub 2]; (B) contacting the gas sample of step (A) comprising NO[sub 2] with an aqueous reagent of bisulfite/sulfite and a compound selected from urea, sulfamic acid, hydrazinium ion, hydrazoic acid, nitroaniline, sulfanilamide, sulfanilic acid, mercaptopropanoic acid, mercaptosuccinic acid, cysteine or combinations thereof at between about 0 and 100 C at a pH of between about 1 and 7 for between about 0.01 and 60 sec; and (C) optionally contacting the reaction product of step (A) with conventional chemical reagents to reduce the concentrations of the organic products of the reaction in step (B) to environmentally acceptable levels. Urea or sulfamic acid are preferred, especially sulfamic acid, and step (C) is not necessary or performed. 16 figs.

  9. System for monitoring the growth of crystalline films on stationary substrates

    DOEpatents

    Sheldon, P.

    1995-10-10

    A system for monitoring the growth of crystalline films on stationary or rotating substrates includes a combination of some or all of the elements including a photodiode sensor for detecting the intensity of incoming light and converting it to a measurable current, a lens for focusing the RHEED pattern emanating from the phosphor screen onto the photodiode, an interference filter for filtering out light other than that which emanates from the phosphor screen, a current amplifier for amplifying and converting the current produced by the photodiode into a voltage, a computer for receiving the amplified photodiode current for RHEED data analysis, and a graphite impregnated triaxial cable for improving the signal-to-noise ratio obtained while sampling a stationary or rotating substrate. A rotating stage for supporting the substrate with diametrically positioned electron beam apertures and an optically encoded shaft can also be used to accommodate rotation of the substrate during measurement. 16 figs.

  10. System for monitoring the growth of crystalline films on stationary substrates

    DOEpatents

    Sheldon, P.

    1996-12-31

    A system for monitoring the growth of crystalline films on stationary or rotating substrates includes a combination of some or all of the elements including a photodiode sensor for detecting the intensity of incoming light and converting it to a measurable current, a lens for focusing the RHEED pattern emanating from the phosphor screen onto the photodiode, an interference filter for filtering out light other than that which emanates from the phosphor screen, a current amplifier for amplifying and convening the current produced by the photodiode into a voltage, a computer for receiving the amplified photodiode current for RHEED data analysis, and a graphite impregnated triaxial cable for improving the signal to noise ratio obtained while sampling a stationary or rotating substrate. A rotating stage for supporting the substrate with diametrically positioned electron beam apertures and an optically encoded shaft can also be used to accommodate rotation of the substrate during measurement. 16 figs.

  11. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  12. Generative inspection process planner for integrated production

    SciTech Connect

    Brown, C.W. . Kansas City Div.); Gyorog, D.A. . Dept. of Mechanical Engineering)

    1990-04-01

    This work describes the design prototype development of a generative process planning system for dimensional inspection. The system, IPPEX (Inspection Process Planning EXpert), is a rule-based expert system for integrated production. Using as advanced product modeler, relational databases, and artificial intelligence techniques, IPPEX generates the process plan and part program for the dimensional inspection of products using CMMs. Through an application interface, the IPPEX system software accesses product definition from the product modeler. The modeler is a solid geometric modeler coupled with a dimension and tolerance modeler. Resource data regarding the machines, probes, and fixtures are queried from databases. IPPEX represents inspection process knowledge as production rules and incorporates an embedded inference engine to perform decision making. The IPPEX system, its functional architecture, system architecture, system approach, product modeling environment, inspection features, inspection knowledge, hierarchical planning strategy, user interface formats, and other fundamental issues related to inspection planning and part programming for CMMs are described. 27 refs., 16 figs., 4 tabs.

  13. Examination of charge dilution with EGR to reduce NO{sub x} emissions from a natural gas-fuelled 16 valve DOHC four-cylinder engine

    SciTech Connect

    Jaeaeskelaeinen, H.E.; Wallace, J.S.

    1994-10-01

    Charge dilution is commonly used to reduce emissions of nitrogen oxides (NO{sub x}) from internal combustion engine exhaust gas. The question of whether to use air or exhaust gas recirculation (EGR) as a charge diluent for the natural gas-fuelled test engine is addressed first. The decision to use EGR is based on the potentially lower NO{sub x} and unburned hydrocarbon emissions that could be achieved if a three-way catalyst were applied to the engine. The effect of EGR on the spark advance for maximum brake torque (MBT), NO{sub x}, and unburned hydrocarbon emissions is then examined in detail. The effect on fuel efficiency is discussed briefly. 37 refs., 16 figs., 3 tabs.

  14. Effect of gasoline composition on exhaust hydrocarbon

    SciTech Connect

    Kameoka, Atsushi; Akiyama, Ken-ichi; Hosoi, Kenzo

    1994-10-01

    The purpose of this study is to evaluate the characteristics of individual hydrocarbons in gasoline and to clarify the effect of the gasoline composition on engine-out exhaust hydrocarbons. Experiments were performed on a single cylinder research engine operating under steady state condition. The test fuels were blended gasolines of alkylate, catalytic reformate and fluid catalytic cracking gasoline. Chemically defined binary fuel mixtures of isooctane, benzene, toluene, xylene, and ethylbenzene were used as variables to study their impact on exhaust hydrocarbons. The individual exhaust hydrocarbon species were analyzed using a gas chromatograph with flame ionization detector. The results of tests with blended gasoline indicated that the exhaust hydrocarbons were classified into the unburned fuel and the cracked products such as methane, ethane and various olefins. The production coefficients of benzene were 5% for toluene, 4% for xylene and 6% for ethylbenzene. These values suggested that alkylbenzene in the fuel produced benzene in the exhaust. 8 refs., 16 figs., 5 tabs.

  15. Modal testing in the design evaluation of wind turbines

    SciTech Connect

    Lauffer, J.P.; Carne, T.G.; Ashwill, T.D.

    1987-01-01

    This paper reviews several techniques which have been used to successfully measure modal parameters for wind turbines. Due to problems in providing low frequency excitation (0.1 to 5.0 Hz), modal testing of moderate-size turbines can be difficult. Several techniques of low frequency excitation have been explored, including impact, wind, step-relaxation, and human input. As one application of these techniques, a prototype turbine was tested and two modal frequencies were found to be very close to integral multiples of the operating speed, which caused a resonant condition. The design was modified to shift these frequencies, and the turbine was retested to confirm the expected changes in the modal frequencies. 8 refs., 16 figs., 1 tab.

  16. Low-cost CuInSe[sub 2] submodule development

    SciTech Connect

    Basol, B.M.; Kapur, V.K.; Halani, A.; Leidholm, C. )

    1992-10-01

    Aim of this project is development and demonstration of processing steps necessary for fabrication of high efficiency CuInSe[sub 2] solar cells and sub-modules by the two-stage technique (also called the selenization method.) During this period, we have optimized the processing parameters of this method and demonstrated CuInSe[sub 2]/CdS/ZnO devices with a 1[endash]4 cm[sup 2] area and up to 12.4% active area efficiency. We have also developed a novel approach for the preparation of Cu/In precursors that improved the stoichiometric and morphological uniformity in these films. We have developed processing steps and tooling for handling up to 1 ft[sup 2] size substrates and as a result of these efforts demonstrated our first monolithically integrated sub-module of 1 ft[sup 2] area. 16 figs, 1 tab, 15 refs.

  17. Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors

    SciTech Connect

    1990-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs.

  18. Early and continuing effects of combined alpha and beta irradiation of the lung:

    SciTech Connect

    Scott, B.R.; Hahn, F.F.; Snipes, M.B.; Newton, G.J.; Eidson, A.F.; Mauderly, J.L.; Boecker, B.B.

    1988-03-01

    This report summarizes an inhalation exposure experiment that concerns early and continuing effects of combined alpha and beta irradiation of the lung of rats. Both morbidity at 18 months and mortality within 18 months after exposure were examined for rats exposed to the beta-emitter /sup 147/Pm, the alpha-emitter /sup 238/Pu, or both combined. The results were used to validate hazard-function models that were developed (1)for pulmonary functional morbidity at 18 months and (2) for lethality from radiation pneumonitis and pulmonary fibrosis within 18 months. Both models were found to adequately predict the experimental observations after combined chronic alpha and beta irradiation of the lung. A relative biological effectiveness of approximately 7 was obtained for /sup 238/Pu alpha radiation compared to /sup 147/Pm beta radiation for both pulmonary functional morbidity and lethality from radiation pneumonitis and pulmonary fibrosis. 12 refs., 16 figs., 11 tabs.

  19. Sensitivity of Urban Airshed Model (UAM-IV) calculated air pollutant concentrations to the vertical diffusion parameterization during convective meteorological situations

    SciTech Connect

    Nowacki, P.; Samson, P.J.; Sillman, S.

    1996-10-01

    It is shown that Urban Airshed Model (UAM-IV) calculated air pollutant concentrations during photochemical smog episodes in Atlanta, Georgia, depend strongly on the numerical parameterization of the daytime vertical diffusivity. Results found suggest that vertical mixing is overestimated by the UAM-IV during unstable daytime conditions, as calculated vertical diffusivity values exceed measured and comparable literature values. Although deviations between measured and UAM-IV calculated air pollutant concentrations may only in part be due the UAM-IV diffusivity parameterization, results indicate the large error potential in vertical diffusivity parameterization. Easily implemented enhancements to UAM-IV algorithms are proposed, thus improving UAM-IV modeling performance during unstable stratification. 38 refs., 14 figs., 1 tab.

  20. Natural gas imports and exports. First quarter report 1997

    SciTech Connect

    1997-09-01

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Attachment A shows the percentage of takes to maximum firm contract levels and the weighted average per unit price for each of the long-term importers during the five most recent reporting quarters. Attachment B shows volumes and prices of gas purchased by long-term importers and exporters during the past 12 months. Attachment C shows volume and price information pertaining to gas imported on a short-term or spot market basis. Attachment D shows the gas exported on a short-term or spot market basis to Canada and Mexico. 14 figs., 9 tabs.

  1. Fiscal year 1989 annual report for the Sensors Development Program: Inert Electrodes Program

    SciTech Connect

    Windisch, C.F. Jr.; Koski, O.H.; Stice, N.D.; Morgan, L.G. ); Nikias, C.L. )

    1990-04-01

    The Sensors Development Program is conducted at the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE), Office of Industrial Programs (OIP). The work is being performed in conjunction with the Inert Electrodes Program at PNL. The objectives of the Sensors Development Program are to (1) investigate and develop methods of process monitoring/control for operating electrolytic cells and (2) determine safe operating conditions for the inert anodes. The majority of work in FY 1989 involved (1) evaluating Digital Signal Analysis (DSA) methods to monitor inert anode operation and to determine alumina concentration in both PNL bench-scale laboratory cells and the Prototype Inert Anode Test and (2) developing the reference anode against which inert anode voltage signals could be measured by the DSA-based or other methods. 3 refs., 14 figs., 2 tabs.

  2. Spatial electrochromism in metallopolymeric films of ruthenium polypyridyl complexes

    SciTech Connect

    Leasure, R.M.; Ou, Wei; Moss, J.A.; Linton, R.W.

    1996-01-01

    Electropolymerized thin films of of poly[Ru(vbpy){sub 2}(py){sub 2}]{sup 2+} (vbpy is 4-vinyl-4{prime}-methyl-2,2{prime}-methyl-2,2{prime}-bipyridine; py is pyridine) were prepared. Photolysis of the films in the presence of chloride ion leads to photochemical substitution of Cl{sup -} for pyridine ligands, the structures of which were confirmed by small spot XPS. The absorption spectra and redox potentials of the ruthenium complexes were altered upon substitution of chloride for the pyridine ligands, suggesting the potential for using these materials to fabricate electrochromic film assemblies on optically transparent electrodes. The spectroelectrochemical response of the films was measured. 47 refs., 14 figs., 4 tabs.

  3. Resonant snubber inverter

    DOEpatents

    Lai, J.S.; Young, R.W. Sr.; Chen, D.; Scudiere, M.B.; Ott, G.W. Jr.; White, C.P.; McKeever, J.W.

    1997-06-24

    A resonant, snubber-based, soft switching, inverter circuit achieves lossless switching during dc-to-ac power conversion and power conditioning with minimum component count and size. Current is supplied to the resonant snubber branches solely by the main inverter switches. Component count and size are reduced by use of a single semiconductor switch in the resonant snubber branches. Component count is also reduced by maximizing the use of stray capacitances of the main switches as parallel resonant capacitors. Resonance charging and discharging of the parallel capacitances allows lossless, zero voltage switching. In one embodiment, circuit component size and count are minimized while achieving lossless, zero voltage switching within a three-phase inverter. 14 figs.

  4. Functional Plyometric Exercises for the Throwing Athlete

    PubMed Central

    Pezzullo, David J.; Karas, Steven; Irrgang, James J

    1995-01-01

    In this article we provide athletic health care professionals with a variety of functional strengthening exercises to use in improving the muscular strength of the throwing athlete's shoulder. Upper extremity functional plyometric exercise in sport-specific patterns can be an important component of a throwing athlete's rehabilitation. We discuss several plyometric exercises, using the Inertial Exercise System, the Plyo-ball, and the Theraband. Proper use of these exercises can facilitate a safe and progressive rehabilitation program for the injured, throwing athlete. After the athlete has successfully completed the functional plyometric exercises, a throwing progression can be initiated. ImagesFig 1.Fig 2.Fig 3.Fig 4.Fig 5.Fig 6.Fig 7.Fig 8.Fig 9.Fig 10.Fig 11.Fig 12.Fig 13.Fig 14.Fig 15. PMID:16558304

  5. Position and orientation tracking system

    DOEpatents

    Burks, B.L.; DePiero, F.W.; Armstrong, G.A.; Jansen, J.F.; Muller, R.C.; Gee, T.F.

    1998-05-05

    A position and orientation tracking system presents a laser scanning apparatus having two measurement pods, a control station, and a detector array. The measurement pods can be mounted in the dome of a radioactive waste storage silo. Each measurement pod includes dual orthogonal laser scanner subsystems. The first laser scanner subsystem is oriented to emit a first line laser in the pan direction. The second laser scanner is oriented to emit a second line laser in the tilt direction. Both emitted line lasers scan planes across the radioactive waste surface to encounter the detector array mounted on a target robotic vehicle. The angles of incidence of the planes with the detector array are recorded by the control station. Combining measurements describing each of the four planes provides data for a closed form solution of the algebraic transform describing the position and orientation of the target robotic vehicle. 14 figs.

  6. Conversion of forest residues to a methane-rich gas: Interim Report

    SciTech Connect

    Feldmann, H.G.; Paisley, M.A.; Appelbaum, H.R.

    1986-03-01

    A process is being developed that produces a fuel gas with a heating value of 500 Btu/SCF from diverse forms of biomass, including shredded bark, wood chips, and sawdust. The system uses a high throughput, non-oxygen gasifier that employs sand circulation to supply process heat. Results obtained with a 10-inch I.D. gasifier are presented and compared with those in a 6-inch I.D. reactor. Feed rates up to 12 tons/day (dry) have been achieved corresponding to a specific wood throughput of 2000 lbs/ft/sup 2/-hr. Gas compositions in the two reactors are in excellent agreement and performance in the larger reactor, as measured by carbon conversion, is significantly improved. Cost projections comparing this process with direct combustion are presented that indicate gasification technology should have very significant cost advantages for both generation of plant steam and cogeneration of electricity. 5 refs., 14 figs., 5 tabs.

  7. The earth-coupled heat pump: Utilizing innovative technology in single family rehabilitation strategies

    SciTech Connect

    Not Available

    1989-11-01

    The study examines the feasibility of incorporating the use of earth-coupled heat pump technology in single-family housing rehabilitation projects, based on energy conservation attributes and financial considerations. Following evaluation of a theoretical model which indicated that installations of the heat pumps were feasible, the heat pumps were tested under actual conditions in five single family housing units which were part of the Urban Homesteading Program, and were matched with comparable units which did not receive special treatment. Energy consumption information was collected for all units for twelve months. Variables were identified, and the data was analyzed for individual housing units and compared with the results predicted by the theoretical model to determine the practicality of incorporating such technology in large scale rehabilitation projects. 14 refs., 14 figs., 3 tabs.

  8. Measurement of physical characteristics of materials by ultrasonic methods

    DOEpatents

    Lu, W.Y.; Min, S.

    1998-09-08

    A method is described for determining and evaluating physical characteristics of a material. In particular, the present invention provides for determining and evaluating the anisotropic characteristics of materials, especially those resulting from such manufacturing processes as rolling, forming, extruding, drawing, forging, etc. In operation, a complex ultrasonic wave is created in the material of interest by any method. The wave form may be any combination of wave types and modes and is not limited to fundamental plate modes. The velocity of propagation of selected components which make up the complex ultrasonic wave are measured and evaluated to determine the physical characteristics of the material including, texture, strain/stress, grain size, crystal structure, etc. 14 figs.

  9. First results from electron-photon damage equivalence studies on a generic ethylene-propylene rubber

    SciTech Connect

    Buckalew, W.H.

    1986-04-01

    As part of a simulator adequacy assessment program, the relative effectiveness of electrons and photons to produce damage in a generic ethylene propylene rubber (EPR) has been investigated. The investigation was limited in extent in that a single EPR material, in three thickness, was exposed to Cobalt-60 photons and three electron beam energies. Basing material damage on changes in the EPR mechanical properties elongation and tensile strength, we observed that EPR damage was a smoothly varying function of absorbed energy and independent of irradiating particle type. EPR damage tracked equally well as a function of both incident particle energy and material front surface dose. Based on these preliminary data, we tentatively concluded that a correlation between particle, particle energy, and material damage (as measured by changes in material elongation and/or tensile strength) has been demonstrated. 14 figs.

  10. First observations of Trimpi events at Durban (L = 1. 69) using an OMSKI receiver

    SciTech Connect

    Friedel, R.H.W.; Hughes, A.R.W. ); Dowden, R.L.; Adams, C.D.D. )

    1993-02-01

    We report observations of transient ionospheric disturbances at VLF reflection heights, manifested as perturbations on sub-ionospherically propagating VLF transmitter signals: Trimpi events. Four VLF transmitter signals were monitored at Durban using an OM- SKI receiver. Both traditional Trimpi events and a new dome shaped event were observed at Durban. Occurrence of Trimpis at low L values can be interpreted as the precipitation of very high energy electrons which are capable of producing events during daylight, or as evidence of the fast Trimpi mechanism which could dominate at low L. The average winter event rate observed at Durban was quite low (7 per day on four transmitter signals) but during one very active period on the NAA-Durban signal 88 Trimpi events were observed in 2 hours. This activity was linked to an isolated thunderstorm occurring over the signal path over South Africa. 26 refs., 14 figs., 2 tabs.

  11. Expert system for identification of simultaneous and sequential reactor fuel failures with gas tagging

    DOEpatents

    Gross, K.C.

    1994-07-26

    Failure of a fuel element in a nuclear reactor core is determined by a gas tagging failure detection system and method. Failures are catalogued and characterized after the event so that samples of the reactor's cover gas are taken at regular intervals and analyzed by mass spectroscopy. Employing a first set of systematic heuristic rules which are applied in a transformed node space allows the number of node combinations which must be processed within a barycentric algorithm to be substantially reduced. A second set of heuristic rules treats the tag nodes of the most recent one or two leakers as background'' gases, further reducing the number of trial node combinations. Lastly, a fuzzy'' set theory formalism minimizes experimental uncertainties in the identification of the most likely volumes of tag gases. This approach allows for the identification of virtually any number of sequential leaks and up to five simultaneous gas leaks from fuel elements. 14 figs.

  12. Structure, Permeability and Production Characteristics of the Heber, California Geothermal Field

    SciTech Connect

    James, E.D.; Hoang, V.T.; Epperson, I.J.

    1987-01-20

    The three key permeability elements of the Heber reservoir are “capping” clays above 1800', a sedimentary “matrix permeability” reservoir from 1800'-5500', and fracture permeability in indurated sediments below 5500'. The fractures are related to NW trending strike-slip faults and NE trending normal faults. Maps and cross sections with dipmeter, lost circulation, temperature and Kh data illustrate the structures and their control on the movement of thermal waters. Production creates a strong initial pressure decline in the field that rapidly stabilizes. The long-term pressure decline is predicted to be low (less than 5%). Temperature data show that current development is north of the source of the thermal plume. Reservoir modeling indicates that reservoir pressures will support further development. 14 figs., 2 refs.

  13. (Investigation of effects of 60-Hz electric and magnetic fields on operant and social behavior and on the neuroendocrine system of nonhuman primates)

    SciTech Connect

    Orr, J.L.

    1989-03-24

    The objective of this program is to investigate, using the baboon as a nonhuman primate surrogate for the human, behavioral and neuroendocrine effects associated with exposure to 60-Hz electric and magnetic fields. Results from this program, along with information from experiments conducted elsewhere, could be used to estimate and evaluate the likelihood of deleterious consequences resulting from exposure of humans to the electric and magnetic fields associated with electric power transmission. The test facility is being modified to include combined electric and magnetic field capability. This will be accomplished by the installation of a magnetic field exposure system and modification of the electric field exposure equipment. The purpose of this document is to provide information on the design. 14 figs., 5 tabs.

  14. Development of the ventral striatum in the lizard Gallotia galloti.

    PubMed Central

    Yanes, C; Perez-Batista, M A; Martin-Trujillo, J M; Monzon, M; Rodriguez, A

    1989-01-01

    The ventral striatum nucleus (VS) begins development at Stage 31 (E. 31) from the neuroblasts which proceed from the cellular proliferation of both the ventral and terminal sulci. The ultrastructural features of the neuroblasts of VS between E. 31 and E. 34 have the aspect of immature cells, but as from E. 38 neuronal maturity is gradual until hatching. At E. 34 cellular death occurs. The first degenerated cells belong to Type I (nuclear degeneration) of the pycnotic cells; as from E. 40 cytoplasmic degeneration appears. Vascularisation starts at E. 35 and from E. 38 the first synaptic contacts are observed, especially those of the axodendritic type. Images Fig. 5 Fig. 6 Fig. 7 Fig. 8 Figs 1-4 Fig. 9 Fig. 10 Fig. 11 PMID:2606798

  15. Machining of beryllium with the LLNL Precision Engineering Research Lathe

    SciTech Connect

    Foley, R.J.

    1985-04-01

    In August 1984, six flat samples of beryllium, which were prepared by Brush-Wellmen Corp. using various pressing and sintering processes, were machined at LLNL on the recently completed Precision Engineering Research Lathe (PERL). The purpose of this study, which was conducted in cooperation with the Hughes Aircraft Corporation and partially funded by that organization, was to determine the optical properties of machined beryllium surfaces when prepared under highly controlled conditions using high quality machine tools and CBN (cubic boron nitrite) cutting tools. This report will summarize the materials properties, the machining conditions used on the PERL and a comparison of the completed samples using optical measuring techniques and scanning electron microscopy (SEM). The mirror surface reflecting measurements in the IR region are to be made by the group at Hughes Aircraft and will be exchanged with LLNL as a part of this joint technical effort. 3 refs., 14 figs.

  16. Using memory in the Cedar system

    SciTech Connect

    McGrath, R.E.; Emrath, P.

    1987-01-01

    The design of the virtual memory system for the Cedar multiprocessor under construction at the University of Illinois is discussed. The Cedar architecture features a hierarchy of memory, some shared by all processors, and some shared by subsets of processors. The Xylem operating system is based on Alliant Computer Systems CONCENTRIX(TM) operating system, which is based on 4.2BSD UNIX(TM). Xylem supports multi-tasking and demand paging of parts of the memory hierarchy into a linear virtual address space. Memory may be private to a task or shared between all the tasks. The locality and attributes of a page may be modified during the execution of a program. Examples of how these mechanisms can be used are discussed. 14 figs.

  17. Convective heater

    DOEpatents

    Thorogood, R.M.

    1983-12-27

    A convective heater for heating fluids such as a coal slurry is constructed of a tube circuit arrangement which obtains an optimum temperature distribution to give a relatively constant slurry film temperature. The heater is constructed to divide the heating gas flow into two equal paths and the tube circuit for the slurry is arranged to provide a mixed flow configuration whereby the slurry passes through the two heating gas paths in successive co-current, counter-current and co-current flow relative to the heating gas flow. This arrangement permits the utilization of minimum surface area for a given maximum film temperature of the slurry consistent with the prevention of coke formation. 14 figs.

  18. Apparatus and method of determining molecular weight of large molecules

    DOEpatents

    Fuerstenau, S.; Benner, W.H.; Madden, N.M.; Searles, W.

    1998-06-23

    A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e{sup {minus}} are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation. 14 figs.

  19. Fingerprinting hydrocarbons in the biological resources of the Exxon Valdez spill area

    SciTech Connect

    Bence, A.E.; Burns, W.A.

    1995-12-31

    A procedure has been developed that discriminates Exxon Valdez crude from other sources of hydrocarbons found in Prince Williams Sound and the Gulf of Alaska. The procedure uses polycyclic aromatic hydrocarbon (PAH) distributions, measured by gas chromatography/mass spectrometry (GC/MS), to fingerprint sample extracts. The relative abundances of alkylated phenanthrenes, dibenzothiophenes, and chrysenes are used to differentiate Exxon Valdez crude and its weathering products from other hydrocarbons. Saturate fraction distributions are used to confirm the PAH identification whenever possible. The procedure has been applied to the more than 1,500 PAH analyses of tissues reported by the Oil Spill Health Task Force, formed after the spill to assess subsistence food safety, and nearly 4,700 PAH analyses of biological samples in PWSOIL, the government`s damage-assessment chemistry database. These two datasets constitute the largest collection of hydrocarbon analyses of biological samples form the spill-impact zone. 70 refs., 14 figs., 8 tabs.

  20. Space propulsion by fusion in a magnetic dipole

    SciTech Connect

    Teller, E.; Glass, A.J.; Fowler, T.K. ); Hasegawa, A. ); Santarius, J.F. . Fusion Technology Inst.)

    1991-07-15

    The unique advantages of fusion rocket propulsion systems for distant missions are explored using the magnetic dipole configurations as an example. The dipole is found to have features well suited to space applications. Parameters are presented for a system producing a specific power of kW/kg, capable of interplanetary flights to Mars in 90 days and to Jupiter in a year, and of extra-solar-system flights to 1000 astronomical units (the Tau mission) in 20 years. This is about 10 times better specific power performance than nuclear electric fission systems. Possibilities to further increase the specific power toward 10 kW/kg are discussed, as is an approach to implementing the concept through proof-testing on the moon. 20 refs., 14 figs., 2 tabs.

  1. Space propulsion by fusion in a magnetic dipole

    SciTech Connect

    Teller, E.; Glass, A.J.; Fowler, T.K. ); Hasegawa, A. ); Santarius, J.F. . Fusion Technology Inst.)

    1991-04-12

    A conceptual design is discussed for a fusion rocket propulsion system based on the magnetic dipole configuration. The dipole is found to have features well suited to space applications. Example parameters are presented for a system producing a specific power of 1 kW/kg, capable of interplanetary flights to Mars in 90 days and to Jupiter in a year, and of extra-solar-system flights to 1000 astronomical units (the Tau mission) in 20 years. This is about 10 times better specific power toward 10 kW/kg are discussed, as in an approach to implementing the concept through proof-testing on the moon. 21 refs., 14 figs., 2 tabs.

  2. Computations of quenching and stability in a CICC (cable-in-conduit conductor) conductor

    SciTech Connect

    Wong, R.L.

    1990-09-21

    The quenching and stability behavior of forced-flow helium-cooled, cable-in-conduit conductors (CICC) has been analyzed using a new computer program. This computer analysis code was developed for performing general, transient, thermal analyses on CICCs. The program includes the necessary details for the physical properties of all the constituent materials of such conductors, and accurately models the thermo- and fluid-dynamic behavior of the helium coolant starting from a wide range of initial conditions. It has been applied to a study of the stability and quench behavior of several large-scale conductor options being considered for use in the magnet systems of the International Thermonuclear Experimental Reactor (ITER), and the results will be reported here. 3 refs., 14 figs.

  3. Short range, ultra-wideband radar with high resolution swept range gate

    DOEpatents

    McEwan, T.E.

    1998-05-26

    A radar range finder and hidden object locator is based on ultra-wide band radar with a high resolution swept range gate. The device generates an equivalent time amplitude scan with a typical range of 4 inches to 20 feet, and an analog range resolution as limited by a jitter of on the order of 0.01 inches. A differential sampling receiver is employed to effectively eliminate ringing and other aberrations induced in the receiver by the near proximity of the transmit antenna, so a background subtraction is not needed, simplifying the circuitry while improving performance. Uses of the invention include a replacement of ultrasound devices for fluid level sensing, automotive radar, such as cruise control and parking assistance, hidden object location, such as stud and rebar finding. Also, this technology can be used when positioned over a highway lane to collect vehicle count and speed data for traffic control. 14 figs.

  4. Annual report of 1990 groundwater, monitoring data for treatment, storage, or disposal facilities at the Y-12 plant

    SciTech Connect

    Early, T.O.; Switek, J. )

    1991-02-01

    The purpose of this document is to provide a summary and interpretation of hydrostatic head measurements obtained from wells surrounding the Kerr Hollow Quarry and Chestnut Ridge Sediment Disposal Basin sites at the US Department of Energy Y-12 Plant in Oak Ridge, Tennessee. Water level observations are presented using hydrographs and water table elevation maps based on data obtained during calendar year 1990. Generalized, preliminary interpretation of results are presented. The two sites covered by the this report have interim status under the provisions of the Resource Conservation and Recovery Act (RCRA). A subset of the wells at each are used for groundwater monitoring purposes under the requirements of RCRA. A discussion of the upgradient and downgradient directions for each of the sites is included. 18 refs., 14 figs.

  5. Rationalization and prediction of rare earth selenide superstructures

    SciTech Connect

    Lee, S.; Foran, B. )

    1994-01-12

    We apply second-moment scaled Huckel theory with inclusion of ionic terms to rationalize or predict superstructures found in elemental selenium, LnQ[sub 2] (Ln = La, Ce; Q = S, Se), Ln[sub 10]Se[sub 19] (Ln = La, Ce, Pr, Nd, Sm), and RbDy[sub 3]Se[sub 8]. All these structures contain distortions of square lattices of chalcogen atoms. In the case of Ln[sub 10]Se[sub 19] and RbDy[sub 3]Se[sub g] these lattice distortions are coupled to ordered defects in the chalcogen square lattice. On the basis of our energy calculations we propose eight ground state RbDy[sub 3]Se[sub 8] superstructure patterns among the 5 x 10[sup 5] possible alternatives. Finally we explain the results of our calculations using HOMO-LUMO and Madelung energy arguments. 23 refs., 14 figs., 4 tabs.

  6. Evaluation of graphite/steam interactions for ITER (International Thermonuclear Experimental Reactor)

    SciTech Connect

    Smolik, G.R.; Merrill, B.J.; Piet, S.J.; Holland, D.F.

    1990-09-01

    In this report we present the results of an experimental/analytical study designed to determine the quantity of hydrogen generated during a coolant inleakage accident in ITER. This hydrogen could represent a potential explosive hazard, provided the proper conditions exist, causing machine damage and release of radioactive material. We have measured graphite/steam reaction rates for several graphites and carbon-based composites at temperatures between 1000 C and 1700 C. The effects of steam flow rate, and partial pressure were also examined. The measured reaction rates correlated well with two Arrhenius type relationships. We have used the relationships for GraphNOL N3M in a thermal model to determine that for ITER the quantity of hydrogen produced would range between 5 and 35 kg, depending upon how the graphite tiles are attached to the first wall. While 5 kg is not a significant concern, 35 kg presents an explosive hazard. 20 refs., 14 figs., 1 tab.

  7. Microvalve

    DOEpatents

    Lee, A.P.; Krulevitch, P.A.; Northrup, M.A.; Trevino, J.C.

    1998-10-13

    Micromachined thin film cantilever actuators having means for individually controlling the deflection of the cantilevers, valve members, and rudders for steering same through blood vessels, or positioning same within a blood vessel, for example. Such cantilever actuators include tactile sensor arrays mounted on a catheter or guide wire tip for navigation and tissues identification, shape-memory alloy film based catheter/guide wire steering mechanisms, and rudder-based steering devices that allow the selective actuation of rudders that use the flowing blood itself to help direct the catheter direction through the blood vessel. While particularly adapted for medical applications, these cantilever actuators can be used for steering through piping and tubing systems. 14 figs.

  8. Micromachined actuators/sensors for intratubular positioning/steering

    DOEpatents

    Lee, A.P.; Krulevitch, P.A.; Northrup, M.A.; Trevino, J.C.

    1998-06-30

    Micromachined thin film cantilever actuators having means for individually controlling the deflection of the cantilevers, valve members, and rudders for steering same through blood vessels, or positioning same within a blood vessel, for example. Such cantilever actuators include tactile sensor arrays mounted on a catheter or guide wire tip for navigation and tissues identification, shape-memory alloy film based catheter/guide wire steering mechanisms, and rudder-based steering devices that allow the selective actuation of rudders that use the flowing blood itself to help direct the catheter direction through the blood vessel. While particularly adapted for medical applications, these cantilever actuators can be used for steering through piping and tubing systems. 14 figs.

  9. Evaluation of filter media for clarification of partially dissolved residues containing plutonium

    SciTech Connect

    Foley, E.S.

    1989-10-09

    A common process in the chemical industry employs the leaching of a desirable component from an insoluble substrate, followed by filtration to produce a clarified solution of the desirable component and a discardable residue. The work described here involved evaluating sintered metal filter media for separating dissolved plutonium from undissolved residues generated at various locations owned by the Department of Energy throughout the United States. The work was performed during a six-week assignment at the Savannah River Laboratory as part of a high school science enrichment program conducted in the summer of 1989. The leach step used included dissolving the plutonium-containing solids in a solution of nitric-hydrofluoric acid. To simulate the partial solubility of the actual plutonium-containing residues, a non-radioactive power plant flyash was used. 6 refs., 14 figs., 1 tab.

  10. Reduction of radon daughter concentrations in structures. [UMTRA project

    SciTech Connect

    Not Available

    1982-12-01

    A structure was identified in Salt Lake City wherein uranium mill tailings had been used in the construction and where unusually high levels of radon daughter concentrations (RDC's) existed. The physical and radiological characteristics of the structure were assessed. Ventilation techniques were investigated to assess their effectiveness in reducing RDC's. A preferred set of equipment was identified, installed in the structure and operated to reduce RDC's. Parametric studies were conducted to determine if supplying fresh air or recirculating air through electrostatic precipitators is more effective in reducing RDC's. Fresh air was found to be more effective in reducing RDC's. RDC's have been reduced to levels at or near the target of 0.03 working level under optimal ventilation conditions. Natural gas consumption with the new equipment is about 39% higher than with the original equipment. Electrical energy usage and electrical demand are respectively 50 and 44% higher with the new equipment than with the original equipment. 16 refs., 14 figs., 8 tabs.

  11. Hanford External Dosimetry Program

    SciTech Connect

    Fix, J.J.

    1990-10-01

    This document describes the Hanford External Dosimetry Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy (DOE) and its Hanford contractors. Program services include administrating the Hanford personnel dosimeter processing program and ensuring that the related dosimeter data accurately reflect occupational dose received by Hanford personnel or visitors. Specific chapters of this report deal with the following subjects: personnel dosimetry organizations at Hanford and the associated DOE and contractor exposure guidelines; types, characteristics, and procurement of personnel dosimeters used at Hanford; personnel dosimeter identification, acceptance testing, accountability, and exchange; dosimeter processing and data recording practices; standard sources, calibration factors, and calibration processes (including algorithms) used for calibrating Hanford personnel dosimeters; system operating parameters required for assurance of dosimeter processing quality control; special dose evaluation methods applied for individuals under abnormal circumstances (i.e., lost results, etc.); and methods for evaluating personnel doses from nuclear accidents. 1 ref., 14 figs., 5 tabs.

  12. Scattering from an arbitrary cylinder in the presence of a planar media interface using the bymoment method

    SciTech Connect

    Lee, R.; Cangellaris, A.C. . Electromagnetics Lab.)

    1989-11-01

    We apply the bymoment method to the problem of electromagnetic scattering from a cylinder in the presence of two semi-infinite half-spaces. The finite-element method is used to generate the solution over the region occupied by the cylinder, using a grid which is truncated at a small distance from the scatterer by a surface that conforms to the cross-section of the cylinder. We then couple the properties of the region exterior to the finite-element mesh to the interior solution by using Green's theorem in conjunction with a set of linearly independent functions which satisfy the boundary conditions along the interface and at infinity. Numerical results are obtained and compared to those in the literature. 18 refs., 14 figs.

  13. Method of making bonded or sintered permanent magnets

    DOEpatents

    McCallum, R.W.; Dennis, K.W.; Lograsso, B.K.; Anderson, I.E.

    1995-11-28

    An isotropic permanent magnet is made by mixing a thermally responsive, low viscosity binder and atomized rare earth-transition metal (e.g., iron) alloy powder having a carbon-bearing (e.g., graphite) layer thereon that facilitates wetting and bonding of the powder particles by the binder. Prior to mixing with the binder, the atomized alloy powder may be sized or classified to provide a particular particle size fraction having a grain size within a given relatively narrow range. A selected particle size fraction is mixed with the binder and the mixture is molded to a desired complex magnet shape. A molded isotropic permanent magnet is thereby formed. A sintered isotropic permanent magnet can be formed by removing the binder from the molded mixture and thereafter sintering to full density. 14 figs.

  14. Three-dimensional plasma particle-in-cell calculations of ion thruster backflow contamination

    SciTech Connect

    Roy, R.I.S.; Hastings, D.E.; Taylor, S.

    1996-10-01

    A fully three-dimensional hybrid plasma particle-in-cell model for multi-computer environments was developed to assess the spacecraft backflow contamination of an ion thruster. Results of plume backflow are presented for a 13-cm xenon ion thruster operating with a current level of 0.4 A on a model spacecraft. The computational domain was over 40 m{sup 3} in volume, and used over 35 million particles representing charge-exchange (CEX) xenon ions produced in the plume. Results obtained on a massively parallel 256-node Cray T3D clearly show the plasma density enhancement around the spacecraft due to the CEX ions. Three-dimensional results are compared with the results of a two-dimensional axisymmetric model to explore the three-dimensionality of the backstreaming flowfield. 15 refs., 14 figs., 1 tab.

  15. Tracer Breakthrough Time for the Rate-Pressured Doublet

    SciTech Connect

    Menninger, Will; Sageev, Abraham

    1987-01-20

    A pressure transient analysis method is presented for interpreting breakthrough tie between a constant rate well and a constant pressure well. The wells are modeled as two line sources in an infinite reservoir where the first well injects at a constant pressure and the second well produces at a constant rate. The effects of transient pressure conditions, the distance between the wells, the flowrate, and the tracer injection time on breakthrough time are examined. The first arrival of injected fluid at the production well is significantly longer under transient condition than under steady state condition for the rate-pressure model when the injection pressure is equal to initial reservoir pressure. An injection pressure larger than initial reservoir pressure significantly reduces the breakthrough time, and may yield a breakthrough time significantly smaller than the breakthrough time for the steady state case. 14 figs., 13 refs.

  16. Recommendations to the NRC for review criteria for alternative methods of low-level radioactive waste disposal: Task 2a, Below-ground vaults

    SciTech Connect

    Denson, R.H.; Bennett, R.D.; Wamsley, R.M.; Bean, D.L.; Ainsworth, D.L.

    1987-12-01

    The US Army Engineer Waterways Experiment Station (WES) and the US Army Engineer Division, Huntsville (HNDED) have developed general design criteria and specific design review criteria for the below-ground vault (BGV) alternative method of low-level radioactive waste (LLW) disposal. A BGV is a reinforced concrete vault (floor, walls, and roof) placed underground below the frost line, and above the water table, surrounded by filter blanket and drainage zones and covered with a low permeability earth layer and top soil with vegetation. Eight major review criteria categories have been developed ranging from the loads imposed on the BGV structure through material quality and durability considerations. Specific design review criteria have been developed in detail for seven of the eight major categories. 59 refs., 14 figs., 2 tabs.

  17. High power, short pulses ultraviolet laser for the development of a new x-ray laser

    SciTech Connect

    Meixler, L.; Nam, C.H.; Robinson, J.; Tighe, W.; Krushelnick, K.; Suckewer, S.; Goldhar, J.; Seely, J.; Feldman, U.

    1989-04-01

    A high power, short pulse ultraviolet laser system (Powerful Picosecond-Laser) has been developed at the Princeton Plasma Physics Laboratory (PPPL) as part of experiments designed to generate shorter wavelength x-ray lasers. With the addition of pulse compression and a final KrF amplifier the laser output is expected to have reached 1/3-1/2 TW (10/sup 12/ watts) levels. The laser system, particularly the final amplifier, is described along with some initial soft x-ray spectra from laser-target experiments. The front end of the PP-Laser provides an output of 20--30 GW (10/sup 9/ watts) and can be focussed to intensities of /approximately/10/sup 16/ W/cm/sup 2/. Experiments using this output to examine the effects of a prepulse on laser-target interaction are described. 19 refs., 14 figs.

  18. Negative ion source

    DOEpatents

    Leung, K.N.; Ehlers, K.W.

    1984-12-04

    An ionization vessel is divided into an ionizing zone and an extraction zone by a magnetic filter. The magnetic filter prevents high-energy electrons from crossing from the ionizing zone to the extraction zone. A small positive voltage impressed on a plasma grid, located adjacent an extraction grid, positively biases the plasma in the extraction zone to thereby prevent positive ions from migrating from the ionizing zone to the extraction zone. Low-energy electrons, which would ordinarily be dragged by the positive ions into the extraction zone, are thereby prevented from being present in the extraction zone and being extracted along with negative ions by the extraction grid. Additional electrons are suppressed from the output flux using ExB drift provided by permanent magnets and the extractor grid electrical field. 14 figs.

  19. Mechanisms of Delayed Red Cell Destruction After Thermal Injury. An Experimental in vitro SEM Study

    PubMed Central

    Baar, S.

    1974-01-01

    Factors likely to affect the life span of erythrocytes in thermally injured patients have been investigated by an in vitro model. Normal blood was incubated with phospholipase A, prostaglandins, adrenaline, noradrenaline and adrenochrome. After incubation the samples were heated for 10 min at 48°, 49° and 50°. Glutaraldehyde fixed samples were examined by Stereoscan electronmicrography. Phospholipase A reduced the normal thermal deformation point from 49° to 48°. Prostaglandin E2, noradrenaline and adrenochrome increased the required temperature to 50°. Adrenaline had no effect. Lowering the zeta potential by treatment with neuraminidase increased the thermal deformation point to 50°. This effect was abolished if the cells were also treated with trypsin. Possible applications of these findings to red cell survival in burned patients are discussed. ImagesFigs. 8A, 8B and 9Figs. 1-4Figs. 5-7A, 7B PMID:4835805

  20. An overview of seismic-induced hydrodynamic phenomena in LMR reactor tanks

    SciTech Connect

    Ma, D.C.; Chang, Y.W.; Seidensticker, R.W.

    1991-01-01

    Liquid metal reactors (LMTs) usually contain a huge volume of liquid sodium as reactor coolant. Since most reactor components are submerged in the sodium coolant, the seismic-induced hydrodynamic effects are of great importance in the design of LMR reactor components. Because LMRs operate at low pressures, the reactor components are made of thin-walled structures. Of interest in reactor design, in particular, are the hydrodynamic pressures imposed on various components, such as the reactor vessel wall, thermal liner, and components projecting down into the liquid sodium. The sloshing wave height and impact forces on the reactor cover are also important in assessing the safety of the reactor system. This paper presents an overview of the seismic-induced hydrodynamic phenomena in the LMR reactor tanks. 10 refs., 14 figs., 2 tabs.

  1. Systems and methods for optically measuring properties of hydrocarbon fuel gases

    DOEpatents

    Adler-Golden, S.; Bernstein, L.S.; Bien, F.; Gersh, M.E.; Goldstein, N.

    1998-10-13

    A system and method for optical interrogation and measurement of a hydrocarbon fuel gas includes a light source generating light at near-visible wavelengths. A cell containing the gas is optically coupled to the light source which is in turn partially transmitted by the sample. A spectrometer disperses the transmitted light and captures an image thereof. The image is captured by a low-cost silicon-based two-dimensional CCD array. The captured spectral image is processed by electronics for determining energy or BTU content and composition of the gas. The innovative optical approach provides a relatively inexpensive, durable, maintenance-free sensor and method which is reliable in the field and relatively simple to calibrate. In view of the above, accurate monitoring is possible at a plurality of locations along the distribution chain leading to more efficient distribution. 14 figs.

  2. Irradiation preservation of seafood: Literature review

    SciTech Connect

    Molton, P.M.

    1987-10-01

    The application of gamma-irradiation for extending the shelf life of seafood has been of interest for many years. This report reviews a number of studies on seafood irradiation conducted over the past several years. Topics covered include seafood irradiation techniques and dosages, species applicability and differences, the effects of packaging on seafood preservation, and changes in organoleptic acceptability as a result of irradiation. Particular attention is given to radiation effects (likely and unlikely) of concern to the public. These include the potential for generation of toxic chemical products, botulinum toxin production, and other health concerns. No scientifically defensible evidence of any kind was found for any harmful effect of irradiation of seafoods at the doses being considered (less than 300 krad), and all indications are that irradiation is an acceptable and needed additional tool for seafood preservation. 49 refs., 14 figs., 14 tabs.

  3. Corrosion behavior of materials for MHD steam bottoming plant

    SciTech Connect

    Natesan, K.; Swift, W.M.

    1989-04-01

    Test data have been developed for the corrosion of several commercial ASME-coded alloys and their weldments by exposing internally cooled ring specimens to simulated MHD environments. The specimens, coated with a K/sub 2/SO/sub 4/-rich deposit, were exposed for times up to 2000 h at metal temperatures of 762,593, and 567/degree/C to simulate intermediate-temperature air heater (ITAH), transition region and secondary superheater (SSH) conditions, respectively. This report discusses the observed corrosion scale morphologies of various exposed specimens. Data on scale thickness, depth of intergranular penetration, and metal recession are presented and the results are used to assess the corrosion behavior of various materials for application in the MHD steam bottoming plant. 9 refs., 14 figs., 4 tabs.

  4. Apparatus for the field determination of concentration of radioactive constituents in a medium

    DOEpatents

    Perkins, R.W.; Schilk, A.J.; Warner, R.A.; Wogman, N.A.

    1995-08-15

    The instant invention is an apparatus for determining the concentration of radioactive constituents in a test sample; such as surface soils, via rapid real-time analyses, and direct readout on location utilizing a probe made up of multiple layers of detection material used in combination with an analyzer and real-time readout unit. This is accomplished by comparing the signal received from the probe, which can discriminate between types of radiation and energies with stored patterns that are based upon experimental results. This comparison can be used in the calibration of a readout display that reads out in real-time the concentrations of constituents per given volume. For example, the concentration of constituents such as Cs-137, Sr-90, U-238 in the soil, and noble gas radionuclides such as Kr-85 in the atmosphere, can be measured in real-time, on location, without the need for laboratory analysis of samples. 14 figs.

  5. Search for exotic baryon states with the SPHINX detector

    SciTech Connect

    Kurshetsov, V.F.; Landsberg, L.G.

    1994-11-01

    A number of diffractive processes involving the production of baryon states are studied in a series of experiments using the SPHINX detector and the E{sub p} = 70 GeV proton beam of the IHEP accelerator. These include p + N {yields} [pK{sup +}K{sup {minus}}] + N, p + N {yields} [p{phi}] + N, p + N {yields} [{Lambda}(1520)K{sup +}] + N, p + N {yields} [{Sigma}(1385){sup 0}K{sup +}] + N, p + N {yields} [{Sigma}(1385){sup 0}K{sup +}] + N + (neutrals), p + N {yields} [{Sigma}{sup 0}K{sup +}] + N, and a number of other transitions. Searches for narrow heavy baryons, which are candidates for cryptoexotic hadron states with hidden strangeness, are reported. The first results on meson production in the deep fragmentation region are presented. 21 refs., 14 figs., 2 tabs.

  6. Soviet optical processing research

    SciTech Connect

    VanderLugt, A.; Attard, A.E.; Cronin-Golomb, M.; Hartman, R.L.; Lee, J.N.; Morris, G.M.; Rhodes, W.T.

    1991-04-01

    Optical processing techniques are used to transform, manipulate, or transmit information. The Soviet Union has vigorously pursued optical processing since the 1960s. This report summarizes Soviet capabilities in hardware, particularly in materials and devices, as well as their capability in applications such as image processing and signal processing/computing. Soviet work in optical signal processing may be characterized as follows: good in terms of fundamental science of materials; capable of producing good materials (often on a par with the West); curious lack of activity with ferroelectric liquid crystals; unique capability in biochrome materials; good capabilities in waveguide devices; good research on spatial light modulators using electro-optic materials; lacking in fabrication techniques for devices; good in terms of statistical analysis of expected system performance; lacking in microelectronic support capabilities; and general lack of innovation for new signal processing architectures. 400 refs., 14 figs., 7 tabs.

  7. Long-term need for new generating capacity

    SciTech Connect

    Bloomster, C.H.; Merrill, E.T.

    1987-03-01

    Electricity demand should continue to grow at about the same rate as GNP, creating a need for large amounts of new generating capacity by the year 2000. Only coal and nuclear at this time have the abundant domestic resources and assured technology to meet this need. However, large increase in both coal and nuclear usage will not be acceptable to society without solutions to many of the problems that now deter their increased usage. For coal, the problems center around the safety and environmental impacts of increased coal mining and coal combustion. For nuclear the problems center around reactor safety, radioactive waste disposal, financial risk, and nuclear materials safeguards. The fuel requirements and waste generation for coal plants are orders of magnitude greater than for nuclear. Technology improvements and waste management practices must be pursued to mitigate environmental and safety impacts from electricity generation. 26 refs., 14 figs., 23 tabs.

  8. Theoretical study of the photodissociation cross sections and the photodissociation dynamics of HOCl

    SciTech Connect

    Nanbu, Shinkoh; Iwata, Suehiro

    1992-03-05

    Potential energy surfaces for electronic ground and excited states of HOCl, which are related to the experimentally observed photoabsorption between 400 and 200 nm, were calculated with the ab initio molecular orbital (MO) configuration interaction (CI) method. The transition dipole moment surfaces between these states were also calculated. Two types of model calculations were carried out for evaluation of the theoretical photodissociation cross section. Theoretical spectra exhibit two peaks at about 335 and 245 nm. They are in better agreement with the experimental results than those in the previous study. The present calculation supports the assumption that the HOCl molecule in the stratosphere may contribute to ozone depletion. The rotational state distributions of the product OH({sup 2}II) were explored with classical trajectory calculations. The rotational state distributions are dependent on the excited state. 36 refs., 14 figs., 3 tabs.

  9. Root lengths of plants on Los Alamos National Laboratory lands

    SciTech Connect

    Tierney, G.D.; Foxx, T.S.

    1987-01-01

    Maximum root lengths of 22 plant species occurring on Los Alamos National Laboratory lands were measured. An average of two longest roots from each species were dug up and their lengths, typical shapes, and qualitative morphologics were noted along with the overstory dimensions of the plant individual with which the roots were associated. Maximum root lengths were compared with overstory (height times width) dimensions. Among the life forms studied, the shrubs tend to show the longest roots in relation to overstory size. Forbs show the shortest roots in relation to overstory size. Measurements of tree roots suggest only that immature trees on the Pajarito Plateau may have root-length to overstory-size ratios near one. 30 refs., 14 figs., 2 tabs.

  10. Electrically-programmable diffraction grating

    DOEpatents

    Ricco, A.J.; Butler, M.A.; Sinclair, M.B.; Senturia, S.D.

    1998-05-26

    An electrically-programmable diffraction grating is disclosed. The programmable grating includes a substrate having a plurality of electrodes formed thereon and a moveable grating element above each of the electrodes. The grating elements are electrostatically programmable to form a diffraction grating for diffracting an incident beam of light as it is reflected from the upper surfaces of the grating elements. The programmable diffraction grating, formed by a micromachining process, has applications for optical information processing (e.g. optical correlators and computers), for multiplexing and demultiplexing a plurality of light beams of different wavelengths (e.g. for optical fiber communications), and for forming spectrometers (e.g. correlation and scanning spectrometers). 14 figs.

  11. Capacitive proximity sensor

    DOEpatents

    Kronberg, J.W.

    1994-05-31

    A proximity sensor based on a closed field circuit is disclosed. The circuit comprises a ring oscillator using a symmetrical array of plates that creates an oscillating displacement current. The displacement current varies as a function of the proximity of objects to the plate array. Preferably the plates are in the form of a group of three pair of symmetric plates having a common center, arranged in a hexagonal pattern with opposing plates linked as a pair. The sensor produces logic level pulses suitable for interfacing with a computer or process controller. The proximity sensor can be incorporated into a load cell, a differential pressure gauge, or a device for measuring the consistency of a characteristic of a material where a variation in the consistency causes the dielectric constant of the material to change. 14 figs.

  12. Detection of surface glow related to spacecraft glow phenomenon

    SciTech Connect

    Langer, W.D.; Cohen, S.A.; Manos, D.M.; Motley, R.W.; Ono, M.; Paul, S.; Roberts, D.; Selberg, H.

    1986-02-01

    We have developed a high flux source of low energy neutral beams to study the spacecraft glow phenomena by using a biased limiter to neutralize plasma in ACT-1. Beams of nitrogen and nitrogen-oxygen mixtures with energies of 1 to 15 eV and fluxes greater than or equal to 10/sup 14//cm/sup 2//s were directed on target surfaces consisting of Z-302 and Z-306 paints. With the nitrogen beams we successfully detected a glow due to beam-surface interactions. In addition, we discovered a volume glow effect due to beam-gas interactions which may also play a role in spacecraft glow. 11 refs., 14 figs.

  13. Inclusion of nonlinear aerodynamics in the FLAP code

    SciTech Connect

    Weber, T. )

    1989-11-01

    Horizontal axis wind turbines usually operate with significant portions of the blade in deep stall. This contradicts the assumption in the FLAP code that a linear relation exists between the angle of attack and the lift coefficient. The objective of this paper is to determine the importance of nonlinear aerodynamics in the prediction of loads. The FLAP code has been modified to include the nonlinear relationships between the lift and drag coefficients with the angle of attack. The modification affects the calculation of the induced velocities and the aerodynamic loads. This requires an iterative procedure to determine the induced velocities instead of a closed form solution. A more advanced tower interference model has also been added that accounts for both upwind and downwind tower effects. 7 refs., 14 figs.

  14. Preconstruction schedules, costs, and permit requirements for electric power generating resources in the Pacific Northwest

    SciTech Connect

    Hendrickson, P.L.; Smith, S.A.; Thurman, A.G.; Watts, R.L.; Weakley, S.A.

    1990-07-01

    This report was prepared for the Generation Programs Branch, Office of Energy Resources, Bonneville Power Administration (BPA). The principal objective of the report is to assemble in one document preconstruction cost, schedule, and permit information for twelve specific generating resources. The report is one of many documents that provide background information for BPA's Resource Program, which is designed to identify the type and amount of new resources that BPA may have to add over the next twenty years to maintain an adequate and reliable electric power supply in the Pacific Northwest. A predecessor to this report is a 1982 report prepared by the Pacific Northwest Laboratory (PNL) for the Northwest Power Planning Council (the Council''). The 1982 report had a similar, but not identical, content and format. 306 refs., 14 figs., 22 tabs.

  15. Intramolecular complex formation and triplet energy transfer in polynorbornenes incorporating benzophenone

    SciTech Connect

    Fossum, R.D.; Fox, M.A.

    1997-02-12

    The photophysical properties of homopolymers (2) and block copolymers (3) prepared by ring-opening metathesis polymerization of norbornenes substituted with benzophenone, naphthalene, and phenanthrene groups (1) have been investigated. When benzophenone is attached to this polynorbornene backbone, its excited state behavior differs from that observed for monomeric benzophenone. A new intramolecular excited state complex can be observed in the transient absorption and emission measurements of the benzophenone-substituted homopolymer. In copolymers bearing benzophenone and naphthalene or phenanthrene substituent blocks, triplet energy transfer from the sensitizer (benzophenone) to the arene is observed. This energy transfer dominates over the intramolecular complexation that characterizes group interactions in the homopolymer. 41 refs., 14 figs., 7 tabs.

  16. Automatic lighting controls demonstration

    SciTech Connect

    Rubinstein, F.; Verderber, R.

    1990-03-01

    The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

  17. Motor vehicle fuel analyzer

    DOEpatents

    Hoffheins, B.S.; Lauf, R.J.

    1997-08-05

    A gas detecting system is described for classifying the type of liquid fuel in a container or tank. The system includes a plurality of semiconductor gas sensors, each of which differs from the other in its response to various organic vapors. The system includes a means of processing the responses of the plurality of sensors such that the responses to any particular organic substance or mixture is sufficiently distinctive to constitute a recognizable ``signature``. The signature of known substances are collected and divided into two classes based on some other known characteristic of the substances. A pattern recognition system classifies the signature of an unknown substance with reference to the two user-defined classes, thereby classifying the unknown substance with regard to the characteristic of interest, such as its suitability for a particular use. 14 figs.

  18. Research on carbon content in fly ash from circulating fluidized bed boilers

    SciTech Connect

    Xianbin Xiao; Hairui Yang; Hai Zhang; Junfu Lu; Guangxi Yue

    2005-08-01

    The carbon content in the fly ash from most Chinese circulating fluidized bed (CFB) boilers is much higher than expected, which directly influences the combustion efficiency. In the present paper, carbon burnout was investigated in both field tests and laboratory experiments. The effect of coal property, operation condition, gas-solid mixing, char deactivation, residence time, and cyclone performance are analyzed seriatim based on a large amount of experimental results. A coal index is proposed to describe the coal rank, having a strong effect on the char burnout. Bad gas-solid mixing in the furnace is another important reason of the higher carbon content in the fly ash. Some chars in the fly ash are deactivated during combustion of large coal particles and have very low carbon reactivity. Several suggestions are made about design, operation, and modification to reduce the carbon content in the fly ash. 14 refs., 14 figs., 1 tab.

  19. Coal industry annual 1997

    SciTech Connect

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  20. An experimental investigation of the properties of a non-reacting, supersonic shear layer

    SciTech Connect

    Wantuck, P.J.; Tennant, R.E.; Rothstein, A.D.; Watanabe, H.H.

    1990-01-01

    A shear layer formed by the merging of two different mass density and velocity, supersonic, inert gas streams (Ar and He) was investigated using both intrusive (probes) and non-intrusive (laser-based) techniques. Interpretations based upon mean pitot pressure surveys, namely shear layer growth rate and compressibility agree with established data. An aspirating probe in conjunction with a mass spectrometer comprised a gas sampling system for ultimately obtaining concentration profiles. Rapid scanning of such flows is possible with such a technique but additional efforts are required to make quantitative concentration assignments. The technique does, however, provide a means of qualitatively assessing mixing rates. Finally planar laser-induced fluorescence (PLIF) was used to establish spatially and temporally resolved images of the shear layer. Obtained images demonstrate the usefulness of PLIF to qualitatively monitor turbulent mixing phenomena in supersonic flows. 17 refs., 14 figs.

  1. Hydrogen interaction with shallow and deep centers in GaAs

    SciTech Connect

    Bonapasta, A.A.; Pavesi, L.

    1996-03-05

    The results of detailed theoretical investigations of the properties of atomic and diatomic H in GaAs were analyzed with the effort to give a unified picture of the H behavior in this semiconductor. All calculations were performed in the psuedopotential density-functional framework using a supercell approach. The authors studied both shallow impurities (Si and C) and deep points defects (As antisite and Ga vacancy). Generally, a simple scheme may be applied in order to describe the H interaction with shallow impurities, where a key role is played by the amphoteric character of H. More complex mechanisms are involved in the deep impurity case that are related to new, interesting effects of H incorporation in GaAs. 39 refs., 14 figs., 4 tabs.

  2. Information for seasonal models of carbon fluxes in terrestrial biomes

    SciTech Connect

    King, A.W.; DeAngelis, D.L.

    1985-06-01

    This report is a compilation of information that can be used in developing seasonal carbon flux models for several principal terrestrial biome types. The information includes flux data as well as models made either to simulate such data or to deduce fluxes not directly measurable. The report is divided into three sections that examine (1) photosynthetic production, (2) litterfall, and (3) decomposition during a year. The sections on photosynthetic production and decomposition discuss a large number of models that relate the processes to basic abiotic variables in each of several biome types. The information on litterfall, however, is largely empirical phenology data. A fourth section demonstrates the application of this compiled information to a compartment model of seasonal carbon flux in terrestrial biomes. 14 figs., 12 tabs.

  3. Sphericity determination using resonant ultrasound spectroscopy

    DOEpatents

    Dixon, R.D.; Migliori, A.; Visscher, W.M.

    1994-10-18

    A method is provided for grading production quantities of spherical objects, such as roller balls for bearings. A resonant ultrasound spectrum (RUS) is generated for each spherical object and a set of degenerate sphere-resonance frequencies is identified. From the degenerate sphere-resonance frequencies and known relationships between degenerate sphere-resonance frequencies and Poisson's ratio, a Poisson's ratio can be determined, along with a 'best' spherical diameter, to form spherical parameters for the sphere. From the RUS, fine-structure resonant frequency spectra are identified for each degenerate sphere-resonance frequency previously selected. From each fine-structure spectrum and associated sphere parameter values an asphericity value is determined. The asphericity value can then be compared with predetermined values to provide a measure for accepting or rejecting the sphere. 14 figs.

  4. Suggested techniques, equipment, and standards for the testing of hand insecticide-spraying equipment

    PubMed Central

    Hall, Lawrence B.

    1955-01-01

    The new demands placed upon application equipment by the introduction of modern insecticides have revealed the deficiencies of this equipment when required for continuous use on a large scale. If adequate equipment is to be produced, specifications must be based not only on basic materials tests but also on “use” tests, in which the conditions of field use are simulated. The author outlines suggested techniques to be followed and standards to be adopted in testing the performance of compression sprayers and allied equipment, with reference to the following features: compression-sprayer tank fatigue; tank impact; pump resistance to bursting; pump resistance to collapse; pump friction; cut-off valve durability; constant-pressure valves; cut-off valve actuation; hose flexure; hose tension and bursting-pressure; hose friction; gaskets, valve faces, and similar non-metallic parts; nozzle-orifice erosion; and nozzle pattern. ImagesFIG. 1FIG. 14FIG. 20 PMID:14364189

  5. A comparison of element-by-element preconditioned iterative methods for solid and structural mechanics

    SciTech Connect

    Ferencz, R.M.

    1988-10-01

    Past work with element-by-element (EBE) preconditioned conjugate gradient iterative solution strategies has shown these techniques can be effective for large-scale, three-dimensional calculations in solid and structural mechanics. Significant gains over the profile storage direct solution method traditionally used in implicit finite element codes have been observed for a variety of real engineering analyses, especially in solid mechanics. Structural mechanics applications have proved less successful due to the ill-conditioned linear systems engendered by standard structural discretizations. This lack of robustness has recently motivated reconsideration of Lanczos-based algorithms as alternative iterative drivers. In this paper we compare the relative strengths of the conjugate gradient and Lanczos drivers when coupled with EBE preconditioning. The performance of the two methods is characterized, and compared with direct solution, using a model problem and a number of real engineering meshes. 26 refs., 14 figs., 2 tabs.

  6. Energy Policy Act transportation rate study: Interim report on coal transportation

    SciTech Connect

    1995-10-01

    The primary purpose of this report is to examine changes in domestic coal distribution and railroad coal transportation rates since enactment of the Clean Air Act Amendments of 1990 (CAAA90). From 1988 through 1993, the demand for low-sulfur coal increased, as a the 1995 deadline for compliance with Phase 1 of CAAA90 approached. The shift toward low-sulfur coal came sooner than had been generally expected because many electric utilities switched early from high-sulfur coal to ``compliance`` (very low-sulfur) coal. They did so to accumulate emissions allowances that could be used to meet the stricter Phase 2 requirements. Thus, the demand for compliance coal increased the most. The report describes coal distribution and sulfur content, railroad coal transportation and transportation rates, and electric utility contract coal transportation trends from 1979 to 1993 including national trends, regional comparisons, distribution patterns and regional profiles. 14 figs., 76 tabs.

  7. Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

    SciTech Connect

    Renshaw, A.W.; Ball, S.J.; Ford, C.E.

    1990-11-01

    This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs.

  8. Petroleum supply monthly, October 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-10-30

    Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

  9. Repair of DNA treated with lambda-irradiation and chemical carcinogens: Progress report, 1983-1987

    SciTech Connect

    Goldthwait, D.A.

    1987-08-01

    Studies on the in vitro enzymatic mechanisms of DNA repair of chromatin structures are described. In addition new studies on signal transduction in cancer and in carcinogenesis are emphasized. We are using molecular biological approaches to three model systems, which we are developing. The first involves signal transduction controlling sis gene (platelet derived growth factor-..beta..) mRNA levels in human glioblastoma cells. The second involves signal transduction in the activation of a long terminal repeat. The third involves an experiment designed to detect a tranposition event in a human cell. This progress report will summarize work on DNA repair of chromatin and then detail our progress in developing the three model systems. 59 refs., 14 figs., 7 tabs.

  10. Analysis of depressurized loss-of-forced cooling transients by HERA

    SciTech Connect

    Rider, W.J.; Cappiello, M.W.

    1991-01-01

    The Modular High-Temperature Gas-Cooled Reactor (MHTGR) is one of the next generation reactors, which has passive safety features. Among these safety features is the ability to withstand a depressurized, loss-of-forced cooling of the reactor without release of fission products from the primary containment. In order to assess the capability of the MHTGR to withstand this type of accident condition, the thermal behavior of the reactor core must be well understood. To accomplish this, we have employed the HElium cooled Reactor Analysis code (HERA) to study the MHTGR under these conditions. Our analysis will demonstrate that the MHTGR is capable of withstanding a depressurized loss-of-forced cooling, even under worst case circumstances. 7 refs., 14 figs., 5 tabs.

  11. Corticosteroid-induced mandibular growth retardation and palatal malformation in the ICR mouse fetus.

    PubMed Central

    Silbermann, M; Levitan, S

    1979-01-01

    Pregnant ICR mice were treated with triamcinolone hexacetonide at various stages of gestation. The mandibular ramus and its condylar cartilage were studied histologically in both viable and non-viable offspring. In addition, measurements were made of the overall height of the posterior vertical dimension of the mandible and of condylar height and width. Significant changes were noted in these parameters. Concomitantly, marked changes were observed in the various zones of the condylar cartilage. A very high incidence of cleft palate was noted in newborn and stillborn mice previously treated with triamcinolone. A possible correlation between mandibular growth retardation and palatal clefting is discussed. Images Fig. 4 Fig. 5 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 PMID:489465

  12. Monitored retrievable storage submission to Congress: Volume 3, Monitored retrievable storage program plan. [Contains glossary

    SciTech Connect

    1987-03-01

    This document presents the current DOE program objectives and the strategy for implementing the proposed program for the integral MRS facility. If the MRS proposal is approved by Congress, any needed revisions to the Program Plan will be made available to the Congress, the State of Tennessee, affected Indian tribes, local governments, other federal agencies, and the public. The proposal for constructing an MRS facility must include: the establishment of a federal program for the siting, development, construction, and operation of MRS facilities; a plan for funding the construction and operation of MRS facilities; site-specific designs, specifications, and cost estimates for the first such facility; a plan for integrating MRS facilities with other storage and disposal facilities authorized by the NWPA. 32 refs., 14 figs., 1 tab.

  13. Polarization-independent optical wavelength filter for channel dropping applications

    DOEpatents

    Deri, R.J.; Patterson, F.

    1996-05-07

    The polarization dependence of optical wavelength filters is eliminated by using waveguide directional couplers. Material birefringence is used to compensate for the waveguide (electromagnetic) birefringence which is the original cause of the polarization dependence. Material birefringence is introduced in a controllable fashion by replacing bulk waveguide layers by finely layered composites, such as multiple quantum wells using III-V semiconductor materials. The filter has use in wavelength-division multiplexed fiber optic communication systems. This filter has broad application for wavelength-tunable receivers in fiber optic communication links, which may be used for telecommunications, optical computer interconnect links, or fiber optic sensor systems. Since multiple-wavelength systems are increasingly being used for all of these applications, the filter is useable whenever a rapidly tunable, wavelength-filtering receiver is required. 14 figs.

  14. World nuclear fuel cycle requirements 1991

    SciTech Connect

    Not Available

    1991-10-10

    The nuclear fuel cycle consists of mining and milling uranium ore, processing the uranium into a form suitable for generating electricity, burning'' the fuel in nuclear reactors, and managing the resulting spent nuclear fuel. This report presents projections of domestic and foreign requirements for natural uranium and enrichment services as well as projections of discharges of spent nuclear fuel. These fuel cycle requirements are based on the forecasts of future commercial nuclear power capacity and generation published in a recent Energy Information Administration (EIA) report. Also included in this report are projections of the amount of spent fuel discharged at the end of each fuel cycle for each nuclear generating unit in the United States. The International Nuclear Model is used for calculating the projected nuclear fuel cycle requirements. 14 figs., 38 tabs.

  15. Some aspects of neuroendocrine pathology.

    PubMed Central

    Polak, J M; Bloom, S R

    1987-01-01

    The advent of modern microscopical investigative methods for the determination of neuroendocrine differentiation has increasingly given credence to the original concept of a "diffuse endocrine system". These methods include a variety of silver impregnation techniques, technologically advanced light and electron microscopical immunocytochemistry, and, lately, the ability to localise specific binding sites by in vitro autoradiography and mRNA species by in situ hybridisation. Further insight has been gained into the possible role of regulatory peptides contained in the so called "diffuse endocrine system" and into the nature of disease processes by investigating the role of the system in benign and malignant disease. Images Fig 13 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9 Fig 10 Fig 11 Fig 12 Fig 14 Fig 15 PMID:3312297

  16. Shock-wave equation-of-state studies at Los Alamos

    SciTech Connect

    Morris, C.E.

    1990-01-01

    A history of the shock-wave equation-of-state (EOS) studies at Los Alamos is given. Particular emphasis is placed on the pioneering research in the 1950s where many of the experimental techniques and methods of analysis were developed, which we now take for granted. A brief review of shock-wave physics is given, which illustrates important hydrodynamic and thermodynamic concepts. Recent studies on the EOS of Ti are presented with emphasis on the {alpha}-to-{omega} phase transition. VISAR wave profiles on polycrystalline Ni and single-crystal Ni are presented to determine the strengths of these materials at pressure. Low-density polystyrene foam Hugoniot experiments are described and results analyzed. 21 refs., 14 figs.

  17. Self-adjustable supplemental support system for a cylindrical container in a housing

    DOEpatents

    Blaushild, R.M.

    1987-01-30

    A self-adjustable supplementary support system for a cylindrical container coaxially disposed in a cylindrical housing by upper flanged supports has a plurality of outwardly extending bracket units on the external surface of the container which coact with inwardly extending resiliently outwardly extending bracket units on the inner wall of the cylindrical housing. The bracket units have flanges which form a concave surface that seats on support bars, attached by links to torsion bars that are secured to ring segments annularly spaced about the inner wall of the cylindrical housing and the bracket units and support bars coact with each other to radially position and support the container in the housing during movement of the two components from a vertical to a horizontal position, and during transportation of the same. 14 figs.

  18. The theory and practice of high resolution scanning electron microscopy

    SciTech Connect

    Joy, D.C. Oak Ridge National Lab., TN )

    1990-01-01

    Recent advances in instrumentation have produced the first commercial examples of what can justifiably be called High Resolution Scanning Electron Microscopes. The key components of such instruments are a cold field emission gun, a small-gap immersion probe-forming lens, and a clean dry-pumped vacuum. The performance of these microscopes is characterized by several major features including a spatial resolution, in secondary electron mode on solid specimens, which can exceed 1nm on a routine basis; an incident probe current density of the order of 10{sup 6} amps/cm{sup 2}; and the ability to maintain these levels of performance over an accelerating voltage range of from 1 to 30keV. This combination of high resolution, high probe current, low contamination and flexible electron-optical conditions provides many new opportunitites for the application of the SEM to materials science, physics, and the life sciences. 27 refs., 14 figs.

  19. Weak interactions from 1950-1960: a quantitative bibliometric study of the formation of a field

    SciTech Connect

    White, D.H.; Sullivan, D.

    1986-01-01

    A quantitative technique is illustrated which uses publication statistics from a bibliography of citations in the area of weak interactions to provide a view of trends and patterns in the development of the field during the period from 1950 to 1960. An overview is given of what the physicists working in weak interactions during this period were doing as indicated by an analysis of the subjects of their papers. The dominant problems and concerns are discussed. Focus is then turned to the events surrounding the emergence of the tau/theta particle puzzle, the discovery of parity nonconservation, and the resolution offered by the V-A theory. Displaying the data from the citation index in unusual ways highlights dominant issues of the period, especially the close relationship between theory and experiment in the latter half of the decade. 64 refs., 14 figs. (LEW)

  20. User's guide to a data base of current environmental monitoring projects in the US-Canadian transboundary region

    SciTech Connect

    Ballinger, M.Y.; Defferding, J.; Chapman, E.G.; Bettinson, M.D.; Glantz, C.S.

    1987-11-01

    This document describes how to use a data base of current transboundary region environmental monitoring projects. The data base was prepared from data provided by Glantz et al. (1986) and Concord Scientific Corporation (1985), and contains information on 226 projects with monitoring stations located within 400 km (250 mi) of the US-Canadian border. The data base is designed for use with the dBASE III PLUS data management systems on IBM-compatible personal computers. Data-base searches are best accomplished using an accompanying command file called RETRIEVE or the dBASE command LIST. The user must carefully select the substrings on which the search is to be based. Example search requests and subsequent output are presented to illustrate substring selections and applications of the data base. 4 refs., 15 figs., 4 tabs.

  1. An assessment of the risk significance of human errors in selected PSAs and operating events

    SciTech Connect

    Palla, R.L. Jr.; El-Bassioni, A. . Office of Nuclear Reactor Regulation); Higgins, J. )

    1991-01-01

    Sensitivity studies based on Probabilistic Safety Assessments (PSAs) for a pressurized water reactor and a boiling water reactor are described. In each case human errors modeled in the PSAs were categorized according to such factors as error type, location, timing, and plant personnel involved. Sensitivity studies were then conducted by varying the error rates in each category and evaluating the corresponding change in total core damage frequency and accident sequence frequency. Insights obtained are discussed and reasons for differences in risk sensitivity between plants are explored. A separate investigation into the role of human error in risk-important operating events is also described. This investigation involved the analysis of data from the USNRC Accident Sequence Precursor program to determine the effect of operator-initiated events on accident precursor trends, and to determine whether improved training can be correlated to current trends. The findings of this study are also presented. 5 refs., 15 figs., 1 tab.

  2. Genes and gene expression: Localization, damage and control -- A multilevel and inter-disciplinary study

    SciTech Connect

    Ts'o, P.O.P.

    1990-09-01

    All projects are working toward a goal for describing the three dimensional nuclear topography in terms of relative spatial relationships among genes (specific DNA sequence). Methods are now being perfected to detect these genes, quantitatively and spatially, to perturb these genes specifically, and to measure the perturbation in order to assure specificity. We are developing methods to assay, after perturbation of the target DNA within living cells, whether or not only the target sequence are attacked while other sequences remain unharmed. We are now at the stage to do chemical gene modification or masking within living cells in a strictly sequence-specific manner. Soon, we will be able to study the function and the physical location of each gene in living cells with exquisite specificity. 25 refs., 15 figs.

  3. Strengthening mechanisms of tungsten powder reinforced uranium

    SciTech Connect

    Lewis, M.A.K.; Hill, M.A.; Rollett, A.D.; Dunn, P.S.; Mortensen, A.; Massachusetts Inst. of Tech., Cambridge, MA )

    1989-01-01

    Tungsten powder reinforced uranium exhibits a three-fold increase in yield strength due to precipitation hardening. The tungsten-rich interphase precipitates form at moving phase boundaries during slow cooling. Further increases in yield strength, attained with increasing tungsten content, are due to composite strengthening; this is verified by increasing elastic modulus with increasing tungsten content. Age hardening behavior is observed, with strengthening occurring at aging temperatures low in the alpha phase. Aging higher in alpha gives initial strengthening followed by rapid overaging. Beta phase aging results in a very soft structure with precipitates visible optically. Wrought material exhibits significant strain hardening as well as composite strengthening due to elongation of the tungsten particles. 7 refs., 15 figs., 4 tabs.

  4. Initial size distributions and hygroscopicity of indoor combustion aerosol particles

    SciTech Connect

    Li, W.; Hopke, P.K.

    1993-10-01

    Cigarette smoke, incense smoke, natural gas flames, propane fuel flames, and candle flames are contributors of indoor aerosol particles. To provide a quantitative basis for the modeling of inhaled aerosol deposition pattern, the hygroscopic growth of particles from these five sources as well as the source size distributions were measured. Because the experiments were performed on the bases of particles of single size, it provided not only the averaged particle`s hygroscopic growth of each source, but also the detailed size change for particles of different sizes within the whole size spectrum. The source particle size distribution measurements found that cigarette smoke and incense smoke contained particles in the size range of 100-700 nm, while the natural gas, propane, and candle flames generated particles between 10 and 100 nm. The hygroscopic growth experiments showed that these combustion aerosol particles could grow 10% to 120%, depending on the particle sizes and origins. 18 refs., 15 figs., 3 tabs.

  5. Analyzing geographic clustered response

    SciTech Connect

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1991-08-01

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst's task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm. 21 refs., 15 figs., 2 tabs.

  6. Implementing a new TLD system

    SciTech Connect

    Rhea, T.A.

    1988-01-01

    Martin Marietta Energy Systems will soon be issuing new personnel dosimeters at four of their five Department of Energy (DOE) facilities, The Piketon, Ohio uranium enrichment facility is not included in this dosimetry upgrade program. This talk will focus on the ORNL perspective of this program, especially the new beta-gamma dosimeter. Neutron dosimetry will be discussed briefly. The objective of this upgrade is to put in place a state-of-the-art personnel dosimetry system and to meet the recent DOE Laboratory Accreditation Program performance criteria. Processing such a large number of dosimeters will require stringent quality controls. Approximately 18,000 beta-gamma dosimeters are scheduled for issue in January 1989. 15 figs.

  7. Superconducting magnetic coil

    DOEpatents

    Aized, D.; Schwall, R.E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil. 15 figs.

  8. Test of pre-ENDF/B-VI decay data and fission yields

    SciTech Connect

    Rudstam, G.; England, T.R.

    1990-10-01

    Pre-ENDF/B-VI nuclear decay data and fission yields have been supplemented by average beta and gamma energies and Pn-values from recent experiments at Studsvik. This data base has been used for a series of summation calculations, and the results have been compared with experimental determinations of decay heat and of delayed-neutron effects. The comparisons are limited to thermal fission of {sup 235}U and {sup 239}Pu and to fast fission of {sup 238}U. The general impression of the comparisons is that the data base does reproduce experimental results satisfactorily (with a few exceptions) within the combined limits of error of the experimental determinations and the calculation. 21 refs., 15 figs.

  9. Glomerulonephritis associated with arteritis in marmosets infected with hepatitis A virus.

    PubMed Central

    Morita, M.; Kitajima, K.; Yoshizawa, H.; Itoh, Y.; Iwakiri, S.; Shibata, C.; Mayumi, M.

    1981-01-01

    Seven of 8 marmosets (Saguinus oedipus and Saguinus labiatus) injected i.v. with different inocula of hepatitis A virus isolated from patients in the acute phase of disease developed proliferative glomerulonephritis associated with arteritis. The glomerulonephritis was characterized by immunofluorescent and electron-dense deposits and hypercellularity. Although no antigenic component of the glomerular immune complex was detected, this glomerulonephritis and arteritis may be diagnosed morphologically as an immune complex disease. These findings show the possibility of the appearance of exohepatic disease as an immunologically mediated disease in human hepatitis A virus infection. Images Figs. 2-5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Figs. 10-15 Figs. 16-18 PMID:6452891

  10. Waste Isolation Pilot Plant site environmental report for calendar year 1990

    SciTech Connect

    Not Available

    1990-01-01

    The US Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) Operational Environmental Monitoring Plan (OEMP) monitors a comprehensive set of parameters in order to detect any potential environmental impacts and establish baselines for future quantitative environmental impact evaluations. Surface water and groundwater, soil, and biotics are measured for background radiation. Nonradiological environmental monitoring activities include meteorological, air quality, soil properties, and the status of the local biological community. Ecological studies focus on the immediate area surrounding the site with emphasis on the salt storage pile, whereas baseline radiological surveillance covers a broader geographic area including nearby ranches, villages, and cities. Since the WIPP is still in a preoperational state, no waste has been received; therefore, certain elements required by Order DOE 5400.1 are not presented in this report. 15 figs. 19 tabs.

  11. Hot Dry Rock Geothermal Energy Development Program: Annual report, fiscal year 1985

    SciTech Connect

    Brown, D.W.; Franke, P.R.; Smith, M.C.; Wilson, M.G.

    1987-01-01

    The primary objective for the Hot Dry Rock Program at the Los Alamos National Laboratory during fiscal year 1985 was to complete the Phase 2 reservoir connection and to begin flow testing the resulting reservoir. The connection was achieved through redrilling one well and additional fracturing operations, and progress was made toward developing a detailed understanding of the fractured region through a variety of reservoir interrogation methods. Other accomplishments during the fiscal year included improvement of the high-temperature, inflatable, open-hole packer used to isolate sections of the uncased wellbore in collaboration with the Baker Corporation and the design and fabrication of a high-temperature borehole acoustic televiewer in a cooperative program with a research institute in West Germany. Progress was also made in techniques for the collection and analysis of microseismic data. Reservoir-engineering activities and geochemical studies, as well as the more routine support activities, continued in FY85. 18 refs., 15 figs.

  12. Some results of long-term investigation population exposed as a result of release of radioactive wastes into the Techa River in Southern Urals

    SciTech Connect

    Degteva, M.O.; Kozheurov, V.P.; Vorobiova, M.I.

    1992-06-01

    This paper describes results of a long-term investigation of a population exposed to radioactive waste release in 1949-1956 into the Techa River in the Southern Urals. Systematic measurements of radionuclide concentration in the river waters, sediments, and floodplain soils and measurements of exposure gamma dose rates as well as studies of the radionuclide composition in the contaminated areas began in the summer of 1951. As a result of the contamination, 124,000 residents were exposed to radiation and 28,100 received significant doses in terms of health effect potential. Covered results include the following: estimation of external radiation doses; content of strontium-90 in humans and estimation of radionuclide ingestion rates; age-dependent model of strontium metabolism in the human body; evaluation of doses of internal irradiation; distribution of exposed population according to accumulated doses. 11 refs; 15 figs.

  13. Particle bed reactor propulsion vehicle performance and characteristics as an orbital transfer rocket

    SciTech Connect

    Horn, F.L.; Powell, J.R.; Lazareth, O.W.

    1986-01-01

    The particle bed reactor designed for 100 to 300 MW power output using hydrogen as a coolant is capable of specific impulses up to 1000 seconds as a nuclear rocket. A single space shuttle compatible vehicle can perform extensive missions from LEO to 3 times GEO and return with multi-ton payloads. The use of hydrogen to directly cool particulate reactor fuel results in a compact, lightweight rocket vehicle, whose duration of usefulness is dependent only upon hydrogen resupply availability. The LEO to GEO mission had a payload capability of 15.4 metric tons with 3.4 meters of shuttle bay. To increase the volume limitation of the shuttle bay, the use of ammonia in the initial boost phase from LEO is used to give greater payload volume with a small decrease in payload mass, 8.7 meters and 12.7 m-tons. 5 refs., 15 figs.

  14. Observations and modeling of biomass and soil organic matter dynamics for the grassland biome worldwide

    SciTech Connect

    Parton, W.J.; Ojima, D.S.; Kirchner, T. ); Scurlock, J.M.O. ); Gilmanov, T.G. ); Scholes, R.J. ); Schimel, D.S. ); Menaut, J.C. ); Seastedt, T. ); Moya, E.G. )

    1993-12-01

    The Century model for plant-soil ecosystems, developed under a Scientific Committee on Problems of the Environment (SCOPE) project, has been modified by a grasslands modelling group so it can be applied to a wide range of tempeate and tropical grasslands worldwide. This study was developed to meet the overall aims of the SCOPE project to review and identify models with wide application and predictive ability, in order to link plant ans soil responses to the large scale modelling of global change. The Century model is reviewed and compared with other models. The model simulated differences between wet and dry years well, but was unable to simulate more subtle differences between years with similar precipitation. The model substantially underestimated live biomass for unusually high production years. 44 refs., 15 figs., 2 tabs.

  15. Process for recovering pertechnetate ions from an aqueous solution also containing other ions

    DOEpatents

    Rogers, R.; Horwitz, E.P.; Bond, A.H.

    1997-02-18

    A solid/liquid process for the separation and recovery of TcO{sub 4}{sup {minus}1} ions from an aqueous solution is disclosed. The solid support comprises separation particles having surface-bonded poly(ethylene glycol) groups; whereas the aqueous solution from which the TcO{sub 4}{sup {minus}1} ions are separated contains a poly(ethylene glycol) liquid/liquid biphase-forming amount of a dissolved salt. A solid/liquid phase admixture of separation particles containing bound TcO{sub 4}{sup {minus}1} ions in such an aqueous solution that is free from MoO{sub 4}{sup {minus}2} ions is also contemplated, as is a chromatography apparatus containing that solid/liquid phase admixture. 15 figs.

  16. The EGS4 Code System: Solution of Gamma-ray and Electron Transport Problems

    DOE R&D Accomplishments Database

    Nelson, W. R.; Namito, Yoshihito

    1990-03-01

    In this paper we present an overview of the EGS4 Code System -- a general purpose package for the Monte Carlo simulation of the transport of electrons and photons. During the last 10-15 years EGS has been widely used to design accelerators and detectors for high-energy physics. More recently the code has been found to be of tremendous use in medical radiation physics and dosimetry. The problem-solving capabilities of EGS4 will be demonstrated by means of a variety of practical examples. To facilitate this review, we will take advantage of a new add-on package, called SHOWGRAF, to display particle trajectories in complicated geometries. These are shown as 2-D laser pictures in the written paper and as photographic slides of a 3-D high-resolution color monitor during the oral presentation. 11 refs., 15 figs.

  17. Comparison of shock severity measures

    SciTech Connect

    Baca, T.J.

    1989-01-01

    In an effort to clarify the issues associated with quantifying shock severity, this paper compares the merits of two measures of shock severity. The first measure is the widely used absolute acceleration shock response spectrum (SAA). The second measure of shock severity is relatively new and is known as the shock intensity spectrum (SIS). Overall information content of SAA and SIS spectra are compared and discussed in the context of two shock excitations having known amplitude, duration, and frequency content. The first is a burst of band-limited white noise and the second is a classical haversine pulse. After describing both the SAA and SIS shock measures, numerous examples are described which emphasize the strengths and limitations of each shock characterization method. This discussion reveals how the use of different shock measures may alter an engineer's conclusions about relative shock severity between two shock environments. 8 refs., 15 figs.

  18. Hanford radiological protection support services annual report for 1988

    SciTech Connect

    Lyon, M.; Fix, J.J.; Kenoyer, J.L.; Leonowich, J.A.; Palmer, H.E.; Sula, M.J.

    1989-06-01

    The report documents the performance of certain radiological protection sitewide services during calendar year (CY) 1988 by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy-Richland Operations Office (DOE-RL) and contractor activities on the Hanford Site. The routine program for each service is discussed along with any significant program changes and tasks, investigations, and studies performed in support of each program. Other related activities such as publications, presentations, and memberships on standard or industry committees are also listed. The programs covered provide services in the areas of (1) internal dosimetry, (2) in vivo measurements, (3) external dosimetry, (4) instrument calibration and evaluation, (5) calibration of radiation sources traceable to the National Institute of Standards and Technology (NIST) (formerly the National Bureau of Standards), and (6) radiological records. 23 refs., 15 figs., 15 tabs.

  19. Safety lock-out device for electrical appliances

    DOEpatents

    Cliff, P.L. Jr.

    1996-07-09

    A safety lock-out device prevents the insertion of an electrical power cord into an electrical power cord receptacle of an electrical appliance. The device comprises a mounting plate fastened to the appliance and a hinged cover plate attached to the appliance. The cover plate is movable between a first position and a second position such that, in the first position, the cover plate covers and prevents insertion of a power cord into the appliance receptacle. In said second position, the appliance receptacle is uncovered to permit insertion of a power cord into the receptacle. Extending a lock shank through aligned openings formed in flange members extending from the mounting plate, the cover plate locks the cover plate in the first position. 15 figs.

  20. Graphite for the nuclear industry

    SciTech Connect

    Burchell, T.D.; Fuller, E.L.; Romanoski, G.R.; Strizak, J.P.

    1991-01-01

    Graphite finds applications in both fission and fusion reactors. Fission reactors harness the energy liberated when heavy elements, such as uranium or plutonium, fragment or fission''. Reactors of this type have existed for nearly 50 years. The first nuclear fission reactor, Chicago Pile No. 1, was constructed of graphite under a football stand at Stagg Field, University of Chicago. Fusion energy devices will produce power by utilizing the energy produced when isotopes of the element hydrogen are fused together to form helium, the same reaction that powers our sun. The role of graphite is very different in these two reactor systems. Here we summarize the function of the graphite in fission and fusion reactors, detailing the reasons for their selection and discussing some of the challenges associated with their application in nuclear fission and fusion reactors. 10 refs., 15 figs., 1 tab.

  1. Investigation on the continued production of the Naval Petroleum Reserves beyond April 5, 1991

    SciTech Connect

    Not Available

    1990-09-01

    The authority to produce the Naval Petroleum Reserves (NPRs) is due to expire in April 1991, unless extended by Presidential finding. As provided in the Naval Petroleum Reserves Production act of 1976 (Public Law 94-258), the President may continue production of the NPRs for a period of up to three years following the submission to Congress, at least 180 days prior to the expiration of the current production period, of a report that determines that continued production of the NPRs is necessary and a finding by the President that continued production is in the national interest. This report assesses the need to continue production of the NPRs, including analyzing the benefits and costs of extending production or returning to the shut-in status that existed prior to 1976. This continued production study considers strategic, economic, and energy issues at the local, regional, and national levels. 15 figs., 13 tabs.

  2. Flexture plate motion-transfer mechanism, beam-splitter assembly, and interferometer incorporating the same

    DOEpatents

    Carangelo, R.M.; Dettori, M.D.; Grigely, L.J.; Murray, T.C.; Solomon, P.R.; Dine, C.P. Van; Wright, D.D.

    1996-01-23

    A multiplicity of one-piece flexure plates are assembled in pairs to provide a support system on which a retroreflector may be mounted for reciprocal motion. Combined with balance bodies, the flexure plates provide a support system having portions that are dynamically and statically balanced with one another, irrespective of orientation, so as to thereby immunize the unit against extraneous forces. The motion transfer assembly is especially adapted for use to support a moving retroreflector in a two-arm interferometer that may further include a beamsplitter assembly constructed from a one-piece, integrally formed body, the body having convergent, optically flat planar surfaces of specular reflectance, and means for adjustably mounting a beamsplitter therein. The spectrometer is of modular construction, and employs an integrated clocking sub-assembly as well as a light-weight voice-coil motor. 15 figs.

  3. Evaluation of the BEAM--BEAM effect in PEP using Myer's simulation program

    SciTech Connect

    Hutton, A.

    1982-09-01

    The program BEAM BEAM written by Steve Myers for the LEP machine at CERN has given encouraging results in the simulation of the beam-beam effect in electron-positron storage rings. It therefore seemed worthwhile to apply the program to PEP with two main intentions. Firstly, to confirm the validity of the program by comparison with experimental data from previous PEP runs and secondly, to search for an improvement in the operating conditions of PEP. Clearly a successful prediction would also enhance the credibility of the program. The program itself has been extensively described in the literature and will not be repeated here, except for some comments of direct relevance to the present simulation. 14 refs., 15 figs., 4 tabs.

  4. Liquefaction of coals using ultra-fine particle, unsupported catalysts: In situ generation by rapid expansion of supercritical fluid solutions. Quarterly technical progress report, January 1, 1991--March 31, 1991

    SciTech Connect

    Not Available

    1991-09-01

    The program objective is to generate ultra-fine catalyst particles (20 to 400 {Angstrom} in size) and quantify their potential for improving coal dissolution in the solubilization stage of two-stage catalytic-catalytic liquefaction systems. In the first quarterly report for this program the concept behind our approach was detailed, the structure of the program was presented, key technical issues were identified, preliminary designs were outlined, and technical progress was discussed. All progress made during the second quarter of this program related to experiment design of the proposed supercritical expansion technique for generating ultra-fine, iron compound, catalyst particles. This second quarterly report, therefore, presents descriptions of the final designs for most system components; diagnostic approaches and designs for determining particles size and size distributions, and the composition of the pre-expansion supercritical solution; and the overall technique progress made during this reporting period. 6 refs., 15 figs., 1 tab.

  5. Liquefaction of coals using ultra-fine particle, unsupported catalysts: In situ generation by rapid expansion of supercritical fluid solutions

    SciTech Connect

    Not Available

    1991-09-01

    The program objective is to generate ultra-fine catalyst particles (20 to 400 {Angstrom} in size) and quantify their potential for improving coal dissolution in the solubilization stage of two-stage catalytic-catalytic liquefaction systems. In the first quarterly report for this program the concept behind our approach was detailed, the structure of the program was presented, key technical issues were identified, preliminary designs were outlined, and technical progress was discussed. All progress made during the second quarter of this program related to experiment design of the proposed supercritical expansion technique for generating ultra-fine, iron compound, catalyst particles. This second quarterly report, therefore, presents descriptions of the final designs for most system components; diagnostic approaches and designs for determining particles size and size distributions, and the composition of the pre-expansion supercritical solution; and the overall technique progress made during this reporting period. 6 refs., 15 figs., 1 tab.

  6. Fixed-bed gasification research using US coals. Volume 6. Gasification of delayed petroleum coke

    SciTech Connect

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the sixth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of delayed petroleum coke from Pine Bend, MN. The period of the gasification test was June 1-17, 1983. 2 refs., 15 figs., 22 tabs.

  7. The air quality monitoring program for the 1100-EM-1 remedial investigation

    SciTech Connect

    Glantz, C.S.; Laws, G.L.

    1990-09-01

    Air quality monitoring for the remedial investigation of the Hanford Site's 1100-EM-1 operable unit was conducted in the spring and fall of 1989 and during January 1990. The monitoring program was divided into two phases. The first phase examined the air quality impact of routine atmospheric emissions at three of the operable unit's waste sites before the beginning of intrusive remedial investigation activities. The second phase of monitoring examined the air quality impact of routine atmospheric emissions from two of the operable unit's waste sites during intrusive remedial investigation activities. Each phase of the program consisted of a series of monitoring events that measured pollutant concentrations at key locations upwind and downwind of individual waste sites. During each monitoring event, sampling was conducted to determine the air concentrations of a wide variety of volatile organic compounds and semivolatile organic compounds. Monitoring for heavy metals and asbestos was also conducted during some monitoring events. 8 refs., 15 figs., 9 tabs.

  8. Detoxification and generation of useful products from coal combustion wastes

    SciTech Connect

    Not Available

    1990-11-21

    Electric utilities are on the brink of a new era in waste disposal problems. This research project addresses the issue of how to effectively dispose of flyash, bottom ash, desulfurization sludge through the generation of chemically-hardened material that could potentially be used as a cement or as a synthetic aggregate. The specific goals of this study were: (1) to study the hardness of mixtures of flyash, bottom ash, and DSG treated with lime and other hardening agents; (2) to determine the optimum solids content, setting time, moisture content, and post setting treatments that will yield the greatest strength and hardness out of these mixtures; and (3) to determine the leachability of the synthetic material as a measure of its ability to retain absorbed and/or entrained toxic metals. 50 refs., 15 figs., 8 tabs.

  9. ASP (AntiSubmarine Penetrator) base plate redesign and explosive bolt test

    SciTech Connect

    Cole, J.K.; Wolfe, W.P.

    1988-10-01

    This report presents the results of a post-flight investigation of the Rocket Antisubmarine Penetrator (RAP) tests of the AntiSubmarine Penetrator (ASP). It focuses on the cause for the premature deployment of the on-board recovery system and the failure of the base pressure transducers. As a result of the investigation, the base plate of the ASP vehicle was modified to increase its structural stiffness. Also, an instrumented test was conducted to assess the environment that is created when the three explosive bolts are activated to separate the vehicle from the interstage adapter and the rocket booster. The results of this test are presented and discussed. 5 refs., 15 figs.

  10. Workshops and problems for benchmarking eddy current codes

    SciTech Connect

    Turner, L.R.; Davey, K.; Ida, N.; Rodger, D.; Kameari, A.; Bossavit, A.; Emson, C.R.I.

    1988-08-01

    A series of six workshops was held in 1986 and 1987 to compare eddy current codes, using six benchmark problems. The problems included transient and steady-state ac magnetic fields, close and far boundary conditions, magnetic and non-magnetic materials. All the problems were based either on experiments or on geometries that can be solved analytically. The workshops and solutions to the problems are described. Results show that many different methods and formulations give satisfactory solutions, and that in many cases reduced dimensionality or coarse discretization can give acceptable results while reducing the computer time required. A second two-year series of TEAM (Testing Electromagnetic Analysis Methods) workshops, using six more problems, is underway. 12 refs., 15 figs., 4 tabs.

  11. An overview of BWR Mark-1 containment venting risk implications: An evaluation of potential Mark-1 containment improvements

    SciTech Connect

    Wagner, K.C.; Dallman, R.J.; Galyean, W.J.

    1989-06-01

    This report supplements containment venting risk evaluations performed for the Mark-I Containment Performance Improvement (CPI) Program. Quantitative evaluations using simplified containment event trees for station blackout sequences were performed to evaluate potential risk reduction offered by containment venting, and improved automatic depressurization system with a dedicated power source, and an additional supply of water to either the containment sprays or the vessel with a dedicated power source. The risk calculations were based on the Draft NUREG-1150 results for Peach Bottom with selected enhancements. Several sensitivity studies were performed to investigate phenomenological, operational, and equipment performance uncertainties. Qualitative risk evaluations were provided for loss of long-term containment heat removal and anticipated transients without scram for the same set of improvements. A limited discussion is provided on the generic applicability of these results to other plants with Mark-I containments. 23 refs., 15 figs., 13 tabs.

  12. Geostatistical analysis of potentiometric data in the Pennsylvanian aquifer of the Palo Duro Basin, Texas

    SciTech Connect

    Harper, W.V.; Basinger, K.L.; Furr, J.M.

    1988-01-01

    This report details a geostatistical analysis of potentiometric data from the Pennsylvanian aquifer in the Palo Duro Basin, Texas. Such an analysis is a part of an overall uncertainty analysis for a high-level waste repository in salt. Both an expected potentiometric surface and the associated standard error surface are produced. The Pennsylvanian data are found to be well explained by a linear trend with a superimposed spherical semivariogram. A cross-validation of the analysis confirms this. In addition, the cross-validation provides a point-by-point check to test for possible anomalous data. The analysis is restricted to that portion of the Pennsylvanian aquifer that lies to the southwest of the Amarillo Uplift. The Pennsylvanian is absent is some areas across the uplift and data to the northeast were not used in this analysis. The surfaces produced in that analysis are included for comparison. 9 refs., 15 figs.

  13. Solar still versus solar evaporator: A comparative study between their thermal behaviors

    SciTech Connect

    Sartori, E.

    1996-12-31

    This paper presents a theoretical comparison between the thermal behavior of a basin type solar still and that from a solar evaporator. The analyses are twofold: (a) comparing the system temperatures and the heat and mass transfer rates in the transient mode; (b) obtaining parametric representations from both systems using their heat and mass transfer equations. Such comparisons had never been done before. It is shown, among other things, that the evaporation in solar stills is much less than that in open evaporation despite the higher water temperatures in the former system. This is also true even when the water temperature of both systems is the same. It is also observed that the distillation and evaporation rates increase with the increasing water temperature and temperature difference. For relatively high water temperatures of each system the evaporative fraction is equivalent to more than 50% of the corresponding total heat transfer rate. 32 refs., 15 figs.

  14. Behavior of some sealing arrangements for machine tool spindles

    SciTech Connect

    Philpott, M.L.; Colton, M.W.; Cusano, C.

    1995-09-01

    A test stand has been built and instrumented to simulate conditions in the spindle cavity of production machine tools, such as high-speed transfer machines, machining centers, milling machines, etc. The purpose of the simulation is to better understand causes of premature support rolling element bearing failures due to grease degradation and corrosion, from the ingress of coolant vapor. Performance characteristics based on coolant vapor in the test chamber, as measured by relative humidity, chamber temperature and chamber pressure relative to the lab atmosphere were obtained for a radial double-lip seal, labyrinth seal, viscoseal/face seal combination and a mechanical face seal. For the operating conditions considered, the best performance was obtained from the viscoseal/face combination followed by the labyrinth seal. 14 refs., 15 figs.

  15. Diagenesis and fluid evolution of deeply buried Permian (Rotliegende) gas reservoirs, Northwest Germany

    SciTech Connect

    Gaupp, R. ); Matter, A.; Ramseyer, K.; Platt, J. ); Walzebuck, J. )

    1993-07-01

    Depositional environment and tectonic setting were important in the diagenesis and evolution of reservoir properties in the Rotliegende sequence of the North German Basin. Facies belts paralleling the edge of a central saline lake controlled the distribution of early and shallow burial cements. Lake shoreline sands with radial chlorite cement show the best reservoir properties in the study area. Juxtaposition of Rotliegende deposits against either Carboniferous Coal Measures or Late Permian (Zechstein) evaporites by faulting resulted in cross-formational fluid exchange. The introduction of fluids from Carboniferous Coal Measures into Rotliegende reservoirs produced intense clay cementation, significantly reducing rock permeabilities. Influx of Zechstein fluids favored precipitation of late carbonate and anhydrite cements. Cross-formational and fault-related fluid flow was enhanced during periods of fault activity. 50 refs., 15 figs., 1 tab.

  16. Fuel consolidation demonstration program: Final Report

    SciTech Connect

    Not Available

    1990-06-01

    EPRI, Northeast Utilities, Baltimore Gas and Electric, the US Department of Energy and Combustion Engineering are engaged in a program to develop a system for consolidating spent fuel and a method of storing the consolidated fuel in the spent fuel storage pool which is licensable by the US Nuclear Regulatory Commission. Fuel consolidation offers a means of substantially increasing the capacity of spent fuel storage pools. This is a final report of the Fuel Consolidation Demonstration Program. It provides a review of the overall program, a summary of the results obtained, the lessons learned, and an assessment of the present status of the consolidation system developed in the program. 7 refs., 15 figs., 5 tabs.

  17. Plant rhamnogalacturonan II complexation of heavy metal cations

    DOEpatents

    O`Neill, M.A.; Pellerin, P.J.M.; Warrenfeltz, D.; Vidal, S.; Darvill, A.G.; Albersheim, P.

    1999-03-02

    The present invention provides rhamnogalacturonan-II (RG-II) and relates to its ability to complex specific multivalent heavy metal cations. In the presence of boric acid, RG-II monomers form dimers that are cross-linked by a borate ester. The yield of such borate ester cross-linked dimers of RG-II is enhanced in the presence of specific heavy metal cations. The present invention further relates to the utility of RG-II in assays for the detection of specific heavy metal contamination; as a reagent useful in the removal of specific heavy metal cations contaminating foods and liquids, for example, fish, wines, etc.; as a pharmaceutical composition useful as an antidote in specific heavy metal cation poisoning; as a treatment for the detoxification of specific heavy metal cations from blood and/or tissues; and in a method of remediation of waters and soils contaminated with specific heavy metal cations. 15 figs.

  18. Volatile organic compound sensing devices

    DOEpatents

    Lancaster, G.D.; Moore, G.A.; Stone, M.L.; Reagen, W.K.

    1995-08-29

    Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs. 15 figs.

  19. Apparatus for in situ heating and vitrification

    DOEpatents

    Buelt, J.L.; Oma, K.H.; Eschbach, E.A.

    1994-05-31

    An apparatus for decontaminating ground areas where toxic chemicals are buried includes a plurality of spaced electrodes located in the ground and to which a voltage is applied for bringing about current flow. Power delivered to the ground volatilizes the chemicals that are then collected and directed to a gas treatment system. A preferred form of the invention employs high voltage arc discharge between the electrodes for heating a ground region to relatively high temperatures at relatively low power levels. Electrodes according to the present invention are provided with preferentially active lower portions between which current flows for the purpose of soil heating or for soil melting and vitrification. Promoting current flow below ground level avoids predominantly superficial treatment and increases electrode life. 15 figs.

  20. Evaluation of severe accident risks: Quantification of major input parameters: MAACS (MELCOR Accident Consequence Code System) input

    SciTech Connect

    Sprung, J.L.; Jow, H-N ); Rollstin, J.A. ); Helton, J.C. )

    1990-12-01

    Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs.

  1. Orbit effects on impurity transport in a rotating tokamak plasma

    SciTech Connect

    Wong, K.L.; Cheng, C.Z.

    1988-05-01

    Particle orbits in a rotating tokamak plasma are calculated from the equation of motion in the frame that rotates with the plasma. It is found that heavy particles in a rotating plasma can drift away from magnetic surfaces significantly faster with a higher bounce frequency, resulting in a diffusion coefficient much larger than that for a stationary plasma. Particle orbits near the surface of a rotating tokamak are also analyzed. Orbit effects indicate that more impurities can penetrate into a plasma rotating with counter-beam injection. Particle simulation is carried out with realistic experimental parameters and the results are in qualitative agreement with some experimental observations in the Tokamak Fusion Test Reactor (TFTR). 19 refs., 15 figs.

  2. Test and analysis results for two Synergy Power Corp. wind turbines

    SciTech Connect

    Davis, D.; Hansen, C.

    1996-12-31

    The testing and modeling of small (rotor diameter 10.3 m and 12.8 m) wind turbines is the subject of this paper. The paper focuses primarily on the ADAMS computer model for dynamic analysis. The code calculates design loads, optimizes tilt configuration, and helps to interpret test results. A comparison of some of the modeling predictions is made to test data for validation purposes. The ADAMS model was found to accurately predict performance characteristics and loads for free-tilting turbines. ADAMS was found to be relatively successful in modeling the free tilt and variable rotors. The model also showed that tilting behavior is dependent on the restoring moment from the rotor aerodynamics as well as on surface aerodynamics. The effects of changes in air density on the power curve, load predictions, and analysis of emergency stops were also performed satisfactorily with the model. 15 figs.

  3. Sampling apparatus

    DOEpatents

    Gordon, N.R.; King, L.L.; Jackson, P.O.; Zulich, A.W.

    1989-07-18

    A sampling apparatus is provided for sampling substances from solid surfaces. The apparatus includes first and second elongated tubular bodies which telescopically and sealingly join relative to one another. An absorbent pad is mounted to the end of a rod which is slidably received through a passageway in the end of one of the joined bodies. The rod is preferably slidably and rotatably received through the passageway, yet provides a selective fluid tight seal relative thereto. A recess is formed in the rod. When the recess and passageway are positioned to be coincident, fluid is permitted to flow through the passageway and around the rod. The pad is preferably laterally orientable relative to the rod and foldably retractable to within one of the bodies. A solvent is provided for wetting of the pad and solubilizing or suspending the material being sampled from a particular surface. 15 figs.

  4. Time-dependent simulations of a Compact Ignition Tokamak

    SciTech Connect

    Stotler, D.P.; Bateman, G.

    1988-05-01

    Detailed simulations of the Compact Ignition Tokamak are carried out using a 1-1/2-D transport code. The calculations include time-varying densities, fields, and plasma shape. It is shown that ignition can be achieved in this device if somewhat better than L-mode energy confinement time scaling is possible. We also conclude that the performance of such a compact, short-pulse device can depend greatly on how the plasma is evolved to its flat-top parameters. Furthermore, in cases such as the ones discussed here, where there is not a great deal of ignition margin and the electron density is held constant, ignition ends if the helium ash is not removed. In general, control of the deuterium--tritium density is equivalent to burn control. 48 refs., 15 figs.

  5. Silicon PIN diode hybrid arrays for charged particle detection: Building blocks for vertex detectors at the SSC

    SciTech Connect

    Kramer, G.; Gaalema, S.; Shapiro, S.L.; Dunwoodie, W.M.; Arens, J.F.; Jernigan, J.G.

    1989-05-01

    Two-dimensional arrays of solid state detectors have long been used in visible and infrared systems. Hybrid arrays with separately optimized detector and readout substrates have been extensively developed for infrared sensors. The characteristics and use of these infrared readout chips with silicon PIN diode arrays produced by MICRON SEMICONDUCTOR for detecting high-energy particles are reported. Some of these arrays have been produced in formats as large as 512 /times/ 512 pixels; others have been radiation hardened to total dose levels beyond 1 Mrad. Data generation rates of 380 megasamples/second have been achieved. Analog and digital signal transmission and processing techniques have also been developed to accept and reduce these high data rates. 9 refs., 15 figs., 2 tabs.

  6. Studies of oxidative degradation of polymers induced by ionizing radiation

    SciTech Connect

    Clough, R.L.; Gillen, K.T.

    1989-01-01

    Radiation effects on polymers in the presence of air are characterized by complicated phenomena such as dose-rate effects and post-irradiation degradation. These time-dependent effects can be understood in these terms: (1) features of the free radical chain-reaction chemistry underlying the oxidation, and (2) oxygen diffusion effects. A profiling technique has been developed to study heterogeneous degradation resulting from oxygen diffusion, and kinetic schemes have been developed to allow long-term aging predictions from short-term high dose-rate experiments. Low molecular weight additives which act either as free-radical scavengers or else as energy-scavengers are effective as stabilizers in radiation-oxidation environments. Non-radical oxidation mechanisms, involving species such as ozone, can also be important in the radiation-oxidation of polymers. 18 refs., 15 figs.

  7. Gulf stream meanders in the South Atlantic Bight 2: Momentum balances

    SciTech Connect

    Miller, J.L.; Lee, T.N.

    1995-04-15

    Gulf Stream meanders and their associated frontal eddies have been numerically simulated using a model tuned to the southern portion of the South Atlantic Bight. A run which produced events most similar to those observed in nature was identified, and the dynamics of a particular meander event were examined in detail. A complex array of momentum balances are obtained, and they vary with position within the feature. While the along-isobath flow is predominantly in geostrophic balance, several of the nonlinear advection terms in both horizontal momentum equations play important roles in the space-time development of the flow. In particular, the vertical advection of horizontal momentum as well as frictional dissipation are now recognized as important contributors to the dynamical balances in the vicinity of the steep continental slope. It would appear that the semigeostrophic equations constitute the simplest description of this system. 10 refs., 15 figs., 3 tabs.

  8. Recent developments in neutrino physics

    SciTech Connect

    Garvey, G.T.

    1991-01-01

    I shall attempt to summarize recent developments in the experimental situation in neutrino physics. The paper will deal with recent results, drawing on either published work or research that has been presented in preprint form, as there is an adequate supply of interesting and controversial data restricting oneself to these generally more reliable sources. The discussion of the theoretical implication of these experimental results will be presented in the following paper by Boris Kayser. The topics to be covered in this presentation are: direct measurements of {bar {nu}}{sub e} mass via beta endpoint studies; status of solar neutrino observations; status of 17-keV neutrino'' reports; and the use of {nu}p elastic scattering to determine the strange quark'' content of the proton. 2 refs., 15 figs., 9 tabs.

  9. Preliminary design for a pierce wiggler beamstick and addendum

    SciTech Connect

    Pirkle, D.

    1988-05-01

    Lawrence Livermore National Laboratory is developing a fast tunable microwave source for operation at 250 GHz and 10kW peak output power. This report presents the preliminary design of a Pierce gun and solenoid magnet that will be compatible with a Pierce-wiggler electron beam formation system (beamstick). The beamstick will be an appropriate power source for a tunable gyro-BWO at 250 GHz. Figure 1 presents the major components of the Pierce-wiggler beamstick: the electron gun, solenoid, beam tunnel, wiggler, and vacuum valve. Figure 2 shows an artistic conception of how the beamstick will interface with the interaction magnet, modulator and gyro-BWO circuit at MIT. 15 figs.

  10. Artificial retardation of barotropic waves in layered ocean models

    SciTech Connect

    Jensen, T.G.

    1996-06-01

    The effect of reducing the barotropic gravity wave speed in a layered ocean model in order to gain computational speed is explored. In theory the error in the propagation of baroclinic gravity waves typically is less than 3% for a reduction of the external gravity speed by one order of magnitude. This is confirmed in a numerical experiment. For baroclinic Rossby waves, the phase speed error is even less. The barotropic response is limited to the reduced radius of deformation. The method, which we will refer to as gravity wave retardation, is therefore applicable only for oceanic flows where the barotropic mode is of minor importance. It is demonstrated that the method gives very good results for the baroclinic flow of an equatorial jet, spinup of a midlatitude ocean and flow over a midoceanic ridge. The method can be considered as an alternative to multilayer reduced gravity models, and has the advantage that bottom topography can be included. 24 refs., 15 figs.

  11. Feeding Activity, Rate of Consumption, Daily Ration and Prey Selection of Major Predators in the John Day Pool. 1982 Annual Report.

    SciTech Connect

    Gray, Gerard A.; United States. Bonneville Power Administration

    1984-03-01

    This study was initiated to determine the extent of predation by resident populations of native and introduced fish on juvenile salmonids in main stem Columbia River Reservoirs. The John Day Reservoir and tailrace was selected as the study area. First year objectives were: (1) determine whether native and introduced predators preyed on juvenile salmonids; (2) determine which species were major predators; and (3) locate areas where predation was most intense. Results indicated that juvenile salmonids were consumed by all four predatory fish species studied: northern squawfish (Ptychocheilus oregonensis), walleye (Stizostedion vitreum vitreum), smallmouth bass (Micropterus dolomieu), and channel catfish (Ictalurus punctatus). However, degree of predation varied among predators as a function of spatial distribution, apparent abundance, size, and temporal feeding behavior. 15 figs., 16 tabs.

  12. Device and method for producing a containment barrier underneath and around in-situ buried waste

    DOEpatents

    Gardner, B.M.; Smith, A.M.; Hanson, R.W.; Hodges, R.T.

    1998-08-11

    An apparatus is described for building a horizontal underground barrier by cutting through soil and depositing a slurry, preferably on which cures into a hardened material. The apparatus includes a digging means for cutting and removing soil to create a void under the surface of the ground and injection means for inserting barrier-forming material into the void. In one embodiment, the digging means is a continuous cutting chain. Mounted on the continuous cutting chain are cutter teeth for cutting through soil and discharge paddles for removing the loosened soil. This invention includes a barrier placement machine, a method for building an underground horizontal containment barrier using the barrier placement machine, and the underground containment system. Preferably the underground containment barrier goes underneath and around the site to be contained in a bathtub-type containment. 15 figs.

  13. Surface treatment of ceramic articles

    DOEpatents

    Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, C.S.

    1998-12-22

    A process is disclosed for producing an article with improved ceramic surface properties including providing an article having a ceramic surface, and placing the article onto a conductive substrate holder in a hermetic enclosure. Thereafter a low pressure ambient is provided in the hermetic enclosure. A plasma including ions of solid materials is produced the ceramic surface of the article being at least partially immersed in a macroparticle free region of the plasma. While the article is immersed in the macroparticle free region, a bias of the substrate holder is biased between a low voltage at which material from the plasma condenses on the surface of the article and a high negative voltage at which ions from the plasma are implanted into the article. 15 figs.

  14. ORNL Long-Range Environmental and Waste Management Plan: Program overview and summary

    SciTech Connect

    Bates, L.D.; Berry, J.B.; Butterworth, G.E.; du Mont, S.P. III; Easterday, C.A.; Geisler, A.H.; Hill, L.G.; Kendrick, C.M.; McNeese, L.E.; Myrick, T.E.; Pudelek, R.E.; Rohwer, P.S.; Scanlan, T.F.; Stratton, L.E.; Trabalka, J.R.; Youngblood, E.L.

    1987-12-01

    The primary purpose is to provide a thorough and systematic planning document to reflect the continuing process of site assessment, strategy development, and planning for the current and long-term control of environmental issues, waste management practices, and remedial action requirments. The document also provides an estimate of the resources required to implenent the current plan. As with any document of this nature, the near-term (one to three years) part of the plan is a realistic assessment of the current program and ongoing capital projects and relects the efforts preceived to be necesary to comply with all current state and federal regulations and DOE orders. It also should be in general agreement with current budget (funding) requests and obligations for these immediate years. Beyond the immediate time frame, the document reflects the strategy and the project and funding estimates as a snapshot at the time of publication. 15 figs., 10 tabs.

  15. Geothermal demonstration: Zunil food dehydration facility

    SciTech Connect

    Maldonado, O. ); Altseimer, J.; Thayer, G.R. ); Cooper, L. ); Caicedo, A. . Inst. Nacional de Electrificacion)

    1991-08-01

    A food dehydration facility was constructed near the town of Zunil, Guatemala, to demonstrate the use of geothermal energy for industrial applications. The facility, with some modifications to the design, was found to work quite satisfactorily. Tests using five different products were completed during the time geothermal energy was used in the plant. During the time the plant was not able to use geothermal energy, a temporary diesel-fueled boiler provided the energy to test dehydration on seven other crops available in this area. The system demonstrates that geothermal heat can be used successfully for dehydrating food products. Many other industrial applications of geothermal energy could be considered for Zunil since a considerable amount of moderate-temperature heat will become available when the planned geothermal electrical facility is constructed there. 6 refs., 15 figs., 7 tabs.

  16. Electric power annual 1997. Volume 2

    SciTech Connect

    1998-10-01

    The Electric Power Annual 1997, Volume 2 contains annual summary statistics at national, regional, and state levels for the electric power industry, including information on both electric utilities and nonutility power producers. Included are data for electric utility retail sales of electricity, associated revenue, and average revenue per kilowatthour of electricity sold; financial statistics; environmental statistics; power transactions; and demand-side management. Also included are data for US nonutility power producers on installed capacity; gross generation; emissions; and supply and disposition of energy. The objective of the publication is to provide industry decisionmakers, government policymakers, analysts, and the general public with historical data that may be used in understanding US electricity markets. 15 figs., 62 tabs.

  17. Surface treatment of magnetic recording heads

    DOEpatents

    Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, S.C.

    1995-12-19

    Surface modification of magnetic recording heads using plasma immersion ion implantation and deposition is disclosed. This method may be carried out using a vacuum arc deposition system with a metallic or carbon cathode. By operating a plasma gun in a long-pulse mode and biasing the substrate holder with short pulses of a high negative voltage, direct ion implantation, recoil implantation, and surface deposition are combined to modify the near-surface regions of the head or substrate in processing times which may be less than 5 min. The modified regions are atomically mixed into the substrate. This surface modification improves the surface smoothness and hardness and enhances the tribological characteristics under conditions of contact-start-stop and continuous sliding. These results are obtained while maintaining original tolerances. 15 figs.

  18. The EGS4 Code System: Solution of gamma-ray and electron transport problems

    SciTech Connect

    Nelson, W.R.; Namito, Yoshihito.

    1990-02-09

    In this paper we present an overview of the EGS4 Code System -- a general purpose package for the Monte Carlo simulation of the transport of electrons and photons. During the last 10-15 years EGS has been widely used to design accelerators and detectors for high-energy physics. More recently the code has been found to be of tremendous use in medical radiation physics and dosimetry. The problem-solving capabilities of EGS4 will be demonstrated by means of a variety of practical examples. To facilitate this review, we will take advantage of a new add-on package, called SHOWGRAF, to display particle trajectories in complicated geometries. These are shown as 2-D laser pictures in the written paper and as photographic slides of a 3-D high-resolution color monitor during the oral presentation. 11 refs., 15 figs.

  19. Method for curing polymers using variable-frequency microwave heating

    DOEpatents

    Lauf, R.J.; Bible, D.W.; Paulauskas, F.L.

    1998-02-24

    A method for curing polymers incorporating a variable frequency microwave furnace system designed to allow modulation of the frequency of the microwaves introduced into a furnace cavity is disclosed. By varying the frequency of the microwave signal, non-uniformities within the cavity are minimized, thereby achieving a more uniform cure throughout the workpiece. A directional coupler is provided for detecting the direction of a signal and further directing the signal depending on the detected direction. A first power meter is provided for measuring the power delivered to the microwave furnace. A second power meter detects the magnitude of reflected power. The furnace cavity may be adapted to be used to cure materials defining a continuous sheet or which require compressive forces during curing. 15 figs.

  20. Joint US/Japanese program of full-size building tests for base seismic isolation

    SciTech Connect

    Kuroda, T. . Nuclear Power Div.); Chang, Y.W.; Seidensticker, R.W. )

    1990-01-01

    Shimizu Corporation of Japan and Argonne National Laboratory of the USA initiated a joint research program on base seismic isolation. The program is centered on testing and analyzing isolation systems in a full-size building and to obtain data on relative response between isolated and nonisolated structures under earthquake conditions. The test facility consists of two identical full-size three-story buildings built side by side, located at Tohoku University in Sendai, Japan. Since April 1989, after the installation of bearings, over 20 earthquake data have been recorded at Sendai test facility. This paper describes the test facility, isolation bearings, observed earthquake records, and responses of isolated and nonisolated buildings under earthquake loads. 3 refs., 15 figs.